WorldWideScience

Sample records for radiochemical property analysis

  1. Development of radiochemical property analysis and handling technology of long-lived radionuclide

    International Nuclear Information System (INIS)

    Park, Jin Ho; Choung, W. M.; Lee, K. I.; Woo, M. S.; Hwang, D. S.; Kim, Y. K.; Choi, Y. D.; Jung, K. C.; Kim, B. H.; Jung, J. Y.

    1997-08-01

    The goals of this research are completion of detail design of wet type lead cell for radioactive test of partitioning process, and possession of technologies to operate and handle safely process equipments in hot cells. The main contents in this research are as follows: 1) For analysis of radiolysis property of extractants in high level radioactive atmosphere, three extractants (DEHPA, DIDPA, TBP) were irradiated, and degradation phenomena was investigated. 2) For development of radioactive analysis technologies of sample solution, property tests of ion chromatography (NovaPac C-18) and activity measuring tests of Cs-137 with collimator, and design/application tests of collimator were performed. 3) Wet type lead cells (α-γ cell, 2 sets) and auxiliary facilities were designed, and tong manipulator and special tools were designed and fabricated, performed test operation. 4) For getting of MA fuel basic data, a review on process technologies for MA fuel production was performed. (author). 55 refs., 10 tabs., 46 figs

  2. Radiochemical analysis of phosphorus in milk samples

    International Nuclear Information System (INIS)

    Oliveira, R.M. de; Cunha, I.I.L.

    1991-01-01

    The determination of phosphorus in milk samples by thermal neutron activation analysis employing radiochemical separation is described. The radiochemical separation consists of the simultaneous irradiation of samples and standards, dissolution of the milk samples in a perchloric acid and nitric acid mixture, addition of zinc hold-back carrier, precipitation of phosphorus as ammonium phospho molybdate (A.M.P.) and sample counting in a Geiger-Mueller detector. The analysis sources of error were studied and the established method was applied to phosphorus analyses in commercial milk samples. (author)

  3. Radiochemical analysis of chlorine-36

    International Nuclear Information System (INIS)

    Rodriguez, M.; Pina, G.; Lara, E.

    2006-01-01

    The radioactive chlorine isotope, 36 Cl, decays with a half-life of 3x10 5 years by emitting a beta particle (98 %) and by electron capture. The aim of this paper is to propose a radiochemical separation method of 36 Cl from the other beta-gamma emitters present in low and medium radioactive wastes such as spent ion exchange resins and evaporator concentrates, that arise from Nuclear Power Plants and particularly in the wastes that come from decommissioning activities of graphite reactors, in order to provide data for 36 Cl inventory calculations. The separation method proposed is based on an oxidation technique where chlorine is trapped by NaOH. 36 Cl beta emissions are measured by liquid scintillation counting by the dual label technique in order to avoid the contamination produced by 14 C which is also trapped by NaOH and which is the main contaminant present in graphite samples. The sensitivity of this method is sufficient to achieve the needed thresholds for the radiological characterization of the radioactive materials to which this method can be applied. (author)

  4. Radiochemicals

    International Nuclear Information System (INIS)

    1980-01-01

    In this catalogue those radioactive chemicals for research are listed which are produced by the Radiochemical Centre Amersham and our laboratories at Brunswick. The dates given for each product can understandably only be limited within the framework of such a catalogue. Additional dates and references to application technique can be obtained from us any time. Our programme is continually updated by new products. If a compound not listed in the catalogue should be required we ask for inquiry. Our working team for special syntheses will try to produce it according to our possibilities and our requirements. (orig.) [de

  5. Radiochemical analysis of the Bikini ashes

    Energy Technology Data Exchange (ETDEWEB)

    Ishibashi, M; Shigematsu, T; Ishida, T

    1954-01-01

    The following nuclides were detected in the Bikini ashes by radiochemical procedures: /sup 45/Ca, /sup 89/Sr, /sup 91/Y, /sup 95/Zr, /sup 103/Ru, /sup 144/Pr, and /sup 237/U. The ion-exchange method was used for analysis of contaminated rain water which fell on the Kyoto area on May 16, 1954 from which the presence of /sup 89/Sr, /sup 95/Zr, and /sup 140/Ba, was detected. Rare earths seemed also to be present.

  6. Radiochemical analysis of military nuclear facilities

    International Nuclear Information System (INIS)

    Bayramov, A.A.; Bayramova, S.M.

    2012-01-01

    Full text : Radiochemical Analysis is a branch of analytical chemistry comprising an aggregate of methods for qualitatively determining the composition and content of radioisotopes in the products of transformations. Safety and minimization of radiation impact on human and environment are important demand of operation of Military Nuclear Facilities (MNF). In accordance of recommendations of International Commission on Radiological Protection there are next objects of radiochemical analysis: 1) potential sources of radiochemical pollution; 2) environment (objects of environment, human environment including buildings, agricultural production, water, air et al.); 3) human himself (determination of dose from external and internal radiation, chemical poisoning). The chemical analysis can be carried out using, for example, the Gas Chromatography instrument whish separates chemical mixtures and identifies the components at a molecular level. It is one of the most accurate tools for analyzing environmental samples. The Gas Chromatography works on the principle that a mixture will separate into individual substances when heated. The heated gases are carried through a column with an inert gas (such as helium). As the separated substances emerge from the column opening, they flow into the Mass Spectrometry. Mass spectrometry identifies compounds by the mass of the analyte molecule. Newly developed portable Gas Chromatography and Mass Spectrometry are techniques that can be used to separate volatile organic compounds and pesticides. Other uses of Gas Chromatography, combined with other separation and analytical techniques, have been developed for radionuclides, explosive compounds such as royal demolition explosive and trinitrotoluene, and metals. So, based on the many years experience of operation of dangerous MNF, in concordance with norms of radiation and chemical safety it was considered that the tasks of the radiochemical analysis of Military Nuclear Facilities include

  7. Radiochemical Analysis Methodology for uranium Depletion Measurements

    Energy Technology Data Exchange (ETDEWEB)

    Scatena-Wachel DE

    2007-01-09

    This report provides sufficient material for a test sponsor with little or no radiochemistry background to understand and follow physics irradiation test program execution. Most irradiation test programs employ similar techniques and the general details provided here can be applied to the analysis of other irradiated sample types. Aspects of program management directly affecting analysis quality are also provided. This report is not an in-depth treatise on the vast field of radiochemical analysis techniques and related topics such as quality control. Instrumental technology is a very fast growing field and dramatic improvements are made each year, thus the instrumentation described in this report is no longer cutting edge technology. Much of the background material is still applicable and useful for the analysis of older experiments and also for subcontractors who still retain the older instrumentation.

  8. Radiochemical and instrumental neutron activation analysis - recent trends

    International Nuclear Information System (INIS)

    Dams, R.

    1990-01-01

    Recent trends of radiochemical and instrumental neutron activation analysis are discussed. Novel developments include the application of cyclic and pulsed activation, better energy resolution with hyperpure germanium detectors, and use of pulse processing systems allowing extremely high count rates of very short-lived isotopes. Further development is anticipated in the field of speciation in biological and environmental studies. Radiochemical methods have led to accurate determinations at the ng/g level. A promising future is expected for neutron activation techniques. (orig.)

  9. Radiochemical analysis in the nuclear research establishment (KFA) Juelich, FRG

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    KFA Juelich is one of the two great nuclear research centres of the Federal Republic of Germany. About 3700 employees including about 700 scientists are engaged in a great number of programs and projects belonging to six main fields of research and development: high temperature reactor and energy techniques; nuclear fusion; properties of materials; materials research; life and environment; methods. In the article the radiochemical analysis work of the former Central Institute of Analytical Chemistry and its two successors is described: activation analysis, application of tracer techniques, fission product analysis. Further on the irradiation facilities are described, a short survey is given on the instrumentation, and the future work is outlined. (T.G.)

  10. Minicomputer system for radiochemical analysis by coincidence spectrometry

    International Nuclear Information System (INIS)

    Brauer, F.P.; Fager, J.E.

    1979-01-01

    Minicomputer-based coincidence analysis methods have been developed for use in performing radiochemical analysis by high-resolution x- and gamma-ray coincidence spectrometry. This paper describes the data-acquisition and analysis methods develolped for qualitative and quantitative analyses of coincidence spectrometric data. Data-acquisition capabilities include both direct multiparameter pulse-height analysis and buffered list-mode acquisition

  11. Radiochemical analysis for nuclear waste management in decommissioning

    International Nuclear Information System (INIS)

    Hou, X.

    2010-07-01

    The NKS-B RadWaste project was launched from June 2009. The on-going decommissioning activities in Nordic countries and current requirements and problems on the radiochemical analysis of decommissioning waste were discussed and overviewed. The radiochemical analytical methods used for determination of various radionuclides in nuclear waste are reviewed, a book was written by the project partners Jukka Lehto and Xiaolin Hou on the chemistry and analysis of radionuclide to be published in 2010. A summary of the methods developed in Nordic laboratories is described in this report. The progresses on the development and optimization of analytical method in the Nordic labs under this project are presented. (author)

  12. Radiochemical analysis for nuclear waste management in decommissioning

    Energy Technology Data Exchange (ETDEWEB)

    Hou, X. (Technical Univ. of Denmark, Risoe National Lab. for Sustainable Energy. Radiation Research Div., Roskilde (Denmark))

    2010-07-15

    The NKS-B RadWaste project was launched from June 2009. The on-going decommissioning activities in Nordic countries and current requirements and problems on the radiochemical analysis of decommissioning waste were discussed and overviewed. The radiochemical analytical methods used for determination of various radionuclides in nuclear waste are reviewed, a book was written by the project partners Jukka Lehto and Xiaolin Hou on the chemistry and analysis of radionuclide to be published in 2010. A summary of the methods developed in Nordic laboratories is described in this report. The progresses on the development and optimization of analytical method in the Nordic labs under this project are presented. (author)

  13. An overview of the status of radiochemical analysis in Hungary

    International Nuclear Information System (INIS)

    Solymosi, J.; Toth, G.

    1994-01-01

    This overview covers the following activities at radioanalytical laboratories in Hungary: tracer techniques and their applications; some important new results; radioimmunoassay; x-ray emission analysis and x-ray fluorescence analysis, Moessbauer-spectroscopy and their applications in various fields of science and technology; neutron activation analysis; radiochemical analysis for nuclear power plant applications activities in various laboratories; nuclear environmental analysis (radioanalytical methods for the investigation of contamination by nuclear facilities). (N.T.) 1 fig.; 7 tabs

  14. Present status and perspective of radiochemical analysis of radionuclides in Nordic countries

    DEFF Research Database (Denmark)

    Hou, Xiaolin; Olsson, Mattias; Togneri, Laura

    2016-01-01

    Radiochemical analysis plays a critical role in the determination of pure beta and alpha emitting radionuclides for environmental monitoring, radioecology, decommissioning, nuclear forensics and geological dating. A remarkable development on radiochemical analysis has been achieved in the past...... of radionuclides, especially in Nordic countries; some requirements from nuclear industries and research organizations, as well as perspectives on the development of radiochemical analysis are discussed....

  15. Dose-rate determination by radiochemical analysis

    International Nuclear Information System (INIS)

    Mangini, A.; Pernicka, E.; Wagner, G.A.

    1983-01-01

    At the previous TL Specialist Seminr we had suggested that α-counting is an unsuitable technique for dose-rate determination due to overcounting effects. This is confirmed by combining α-counting, neutron activation analysis, fission track counting, α-spectrometry on various pottery samples. One result of this study is that disequilibrium in the uranium decay chain alone cannot account for the observed discrepancies between α-counting and chemical analysis. Therefore we propose for routine dose-rate determination in TL dating to apply chemical analysis of the radioactive elements supplemented by an α-spectrometric equilibrium check. (author)

  16. Radiochemical separation and their application to neutron activation analysis technique

    International Nuclear Information System (INIS)

    Turel, Z.R.

    2013-01-01

    The present paper discusses the development of some new, rapid and selective method for the radiochemical separation and estimation of elements such as, Co(II) 2-3 , Ir(III) 4 , Au(III) 5 , Pt(IV), Pd(II), Os(IV) 6 , Cu(II), Ag(I), Mo(VI), Ni(II), Zn(II), Cd(II), Hg(II), Cs(I), Sb(III), La(III), Sc(III) etc. using various reagents. Various parameters such as pH, time of equilibrium, effect of anions and cations, effect of reagent etc. has been determined employing tracers of the elements under consideration and will be discussed. The method is made highly selective by the use of appropriate masking agent. The stoichiometry of metal reagent is determined by the substoichiometric method. Some examples of multielemental radiochemical separation methods thus developed which have been applied in determining the elements by radiochemical thermal neutron activation analysis will be presented and discussed. The implications of the results on the reference system will also be accounted. Statistical evaluation with reference to accuracy, precision and sensitivity will also be presented

  17. Fast analysis procedure of radiochemical coordinat uptake for methotrexate

    International Nuclear Information System (INIS)

    Caston, J.D.; Kamen, B.A.

    1976-01-01

    Under this invention, a radio-chemical analysis is submitted to determine the concentration of methotrexate or its equivalents in analysis in a biological medium. The amounts taken up of the labelled compound and the known concentrations of the unlabelled compound to be determined are radio-isotopically related to a first system containing a pre-determined amount of the labelled compound and a pre-determined amount of the unlabelled compound. In a second system, identical to the first, save that the sample of the biological medium to be analyzed takes the place of the unlabelled compound, the amount of labelled compound taken up is determined radio-isotopically. The concentration of the compound in the sample is then determined by correlation of the labelled compound uptake determined in the second system with the relation determined in the first system. The radio-isotopic relations and determinations may be made by direct and sequential analytical techniques [fr

  18. Radiochemical neutron activation analysis of gold in geochemical samples

    International Nuclear Information System (INIS)

    Zilliacus, R.

    1983-01-01

    A fast method for the radiochemical neutron activation analysis of gold in geochemical samples is described. The method is intended for samples having background concentrations of gold. The method is based on the dissolution of samples with hydrofluoric acid and aqua regia followed by the dissolution of the fluorides with boric acid and hydrochloric acid. Gold is then adsorbed on activated carbon by filtrating the solution through a thin carbon layer. The activity measurements are carried out using a Ge(Li)-detector and a multichannel analyzer. The chemical yields of the separation determined by reirradiation vary between 60 and 90%. The detection limit of the method is 0.2 ng/g gold in rock samples. USGS standard rocks and exploration reference materials are analyzed and the results are presented and compared with literature data. (author)

  19. Phenolsulphotransferase in human tissue: radiochemical enzymatic assay and biochemical properties

    International Nuclear Information System (INIS)

    Anderson, R.J.; Weinshilboum, R.M.

    1980-01-01

    Phenolsulphotransferase (EC 2.8.2.1) (PST) is an important catecholamine and drug metabolizing enzyme. Optimal conditions have been determined for the accurate measurement of PST activity in the human platelet, human renal cortex, and human jejunum with a radiochemical microassay. 3-Methoxy-4-hydroxyphenylglycol (MHPG) and 35 S-3'-phosphoadenosine-5'-phosphosulfate ( 35 S-PAPS) were the substrates for the reaction. The apparent Michaelis-Menten (Ksub(m)) values for MHPG with platelet, renal cortex, and jejunum were 1.09, 0.46 and 1.16 mmol/l, respectively. Apparent Ksub(m) values for PAPS in the same tissues were 0.14, 0.13 and 0.21 μmol/l. The pH optimum of the reacton in all three tissues was approximately 6.2-6.8 with three different buffer systems. The coefficients of variation for the assay of platelet, renal cortex, and jejunal activities were 6.2%, 3.4% and 4.4%, respectively. Mean platelet PST activity in blood samples from 75 randomly selected adult subjects was 5.0 +- 1.72 mmol of MHPG sulfate formed per hour per mg of platelet protein (8.3 X 10 -5 +- 2.9 X 10 -5 μmol min -1 mg -1 , mean +- S.D.). There was a 5-fold intersubject variation in platelet PST activity within two standard deviations of the mean value. Experiments in which partially purified human erythrocyte PST was added to platelet, kidney and gut homogenates under these assay conditions provided evidence that endogenous PST inhibitors did not affect the observed enzyme activity. (Auth.)

  20. Current studies of biological materials using instrumental and radiochemical neutron activation analysis

    International Nuclear Information System (INIS)

    Fardy, J.J.; McOrist, G.D.; Farrar, Y.J.

    1985-01-01

    Instrumental neutron activation analysis still remains the preferred option when analysing the trace element distribution in a wide rage of materials by neutron activation analysis. However, when lower limits of detection are required or major interferences reduce the effectiveness of this technique, radiochemical neutron activation analysis is applied. This paper examines the current use of both methods and the development of rapid radiochemical techniques for analysis of the biological materials, hair, cow's milk, human's milk, milk powder, blood and blood serum

  1. The use of radiochemical analysis for detecting biotracers of food radioactive contamination in Cherkasy Region

    International Nuclear Information System (INIS)

    Matvyijenko, D.G.

    2003-01-01

    Stable biotracers of radioactive contamination according to the findings of analytical control of the foodstuffs was determined. The use of radiochemical analysis for determining the activity of the foodstuffs and water (Sr-90, Cs-137) was evaluated

  2. Radiochemical procedures

    International Nuclear Information System (INIS)

    Lyon, W.S.

    1982-01-01

    The modern counting instrumentation has largely obviated the need for separation processes in the radiochemical analysis but problems in low-level radioactivity measurement, environmental-type analyses, and special situations caused in the last years a renaissance of the need for separation techniques. Most of the radiochemical procedures, based on the classic works of the Manhattan Project chemists of the 1940's, were published in the National Nuclear Energy Series (NNES). Improvements such as new solvent extraction and ion exchange separations have been added to these methods throughout the years. Recently the Los Alamos Group have reissued their collected Radiochemical Procedures containing a short summary and review of basic inorganic chemistry - 'Chemistry of the Elements on the Basis of Electronic Configuration'. (A.L.)

  3. Preparation of proton rich radionuclides in support of radiochemical analysis

    International Nuclear Information System (INIS)

    Jerome, Simon; Larijani, Cyrus; Parker, David

    2012-01-01

    The production of proton rich radionuclides supports a wide range of radiochemical analyses via radioactive yield tracers ( 95m Tc and 236 Pu). In recent years, NPL and the University of Birmingham cyclotron have collaborated to produce these, and other, radionuclides. - Highlights: ► In this paper we options for the production of Tc and Pu tracers. ► The irradiation and measurement of targets producing Tc-95 m and Pu-236 are described. ► Options for production are discussed. ► The results of this study and future work needed are described.

  4. Radiochemical neutron activation analysis of zirconium and zirconium-niobium alloys

    International Nuclear Information System (INIS)

    Tashimova, F.A.; Sadikov, I.I.; Salimov, M.

    2004-01-01

    Full text: Zirconium and zirconium-niobium alloys are used on nuclear technology, as fuel cladding of nuclear reactors. Their nuclear-physical, mechanical and thermophysical properties are influenced them matrix and impurity composition, therefore determination of matrix and impurity content of these materials is a very important task. Neutron activation analysis is one from multielemental and high sensible techniques that are widely applied in analysis of high purity materials. Investigation of nuclear-physical characteristics of zirconium has shown that instrumental variant NAA is unusable for analysis due to high radioactivity of a matrix. Therefore it is necessary carrying out radiochemical separation of impurity radionuclides from matrix. Study of the literature datum have shown, that zirconium and niobium are very well extracted from muriatic solution with 5% tributyl phosphineoxide (TBPO) solution in toluene and 0,75 M solution of di-2-ethyl hexyl phosphoric acid (HDEHP) in cyclohexanone. Investigation of these elements extraction in these systems has shown that more effective and selective separation of matrix radionuclides is achieved in HDEHP-3M HCI system. This system is also extracted and hafnium, witch is an accompanying element of zirconium and its high content prevented determination of other impurity elements in sample. Therefore we used extraction system HDEHP-3M HCl for analysis of zirconium and zirconium-niobium alloys in chromatographic variant. By measurement of distribution profile of a matrix and of elution curve of determined elements is established, that for effective separation of impurity and matrix radionuclides there is enough chromatographic column with diameter 1 cm and height of a sorbent layer 7 cm, thus volume of elute, necessary for complete elution of determinate elements is 35-40 ml. On the basis of the carried out researches the technique of radiochemical NAA of high purity zirconium and zirconium-niobium alloy, which allows to

  5. Critical evaluation of the determination of zirconium and hafnium by instrumental and radiochemical neutron activation analysis

    International Nuclear Information System (INIS)

    Burger, Mario; Kraehenbuehl, Urs

    1991-01-01

    Neutron activation analysis (instrument or radiochemical) is suitable for the determination of zirconium and hafnium in samples of geochemical origin only when sufficient attention is paid to inter-fering nuclides. The size of the necessary correction for INAA depends on the composition of the sample; this problem is discussed. The radio-chemical technique which is recommended involves separation of the samples, precipitations and anion-exchange separation. Results are given for various standard reference materials and for meteorites. (author). 12 refs.; 1 fig.; 9 tabs

  6. Radiochemical analysis of concrete samples for decommission of nuclear reactors

    Energy Technology Data Exchange (ETDEWEB)

    Zapata-Garcia, Daniel; Wershofen, Herbert [Physikalisch-Technische Bundesanstalt (PTB), Bundesallee 100 38116, Braunschweig (Germany); Larijani, Cyrus; Sobrino-Petrirena, Maitane; Garcia-Miranda, Maria; Jerome, Simon M. [National Physical Laboratory (NPL), Hampton Road, Teddington, Middlesex, TW11 0LW (United Kingdom)

    2014-07-01

    Decommissioning of the oldest nuclear power reactors are some of the most challenging technological legacy issues many countries will face in forthcoming years, as many power reactors reach the end of their design lives. Decommissioning of nuclear reactors generates large amounts of waste that need to be classified according to their radioactive content. Approximately 10 % of the contaminated material ends up in different repositories (depending on their level of contamination) while the rest is decontaminated, measured and released into the environment or sent for recycling. Such classification needs to be done accurately in order to ensure that both the personnel involved in decommissioning and the population at large are not needlessly exposed to radiation or radioactive material and to minimise the environmental impact of such work. However, too conservative classification strategies should not be applied, in order to make proper use of radioactive waste repositories since space is limited and the full process must be cost-effective. Implicit in decommissioning and classification of waste is the need to analyse large amounts of material which usually combine a complex matrix with a non-homogeneous distribution of the radionuclides. Because the costs involved are large, it is possible to make great savings by the adoption of best available practices, such as the use of validated methods for on-site measurements and simultaneous determination of more than one radionuclide whenever possible. The work we present deals with the development and the validation of a procedure for the simultaneous determination of {sup 241}Am, plutonium isotopes, uranium isotopes and {sup 90}Sr in concrete samples. Samples are firstly ground and fused with LiBO{sub 2} and Li{sub 2}B{sub 4}O{sub 7}. After dissolution of the fused sample, silicate and alkaline elements are removed followed by radiochemical separation of the target radionuclides using extraction chromatography. Measurement

  7. Radiochemical methods

    International Nuclear Information System (INIS)

    Geary, W.J.

    1986-01-01

    This little volume is one of an extended series of basic textbooks on analytical chemistry produced by the Analytical Chemistry by Open Learning project in the UK. Prefatory sections explain its mission, and how to use the Open Learning format. Seventeen specific sections organized into five chaptrs begin with a general discussion of nuclear properties, types, and laws of nuclear decay and proceeds to specific discussions of three published papers (reproduced in their entirety) giving examples of radiochemical methods which were discussed in the previous chapter. Each section begins with an overview, contains one or more practical problems (called self-assessment questions or SAQ's), and concludes with a summary and a list of objectives for the student. Following the main body are answers to the SAQ's, and several tables of physical constants, SI prefixes, etc. A periodic table graces the inside back cover

  8. Trace determination of uranium and thorium in biological samples by radiochemical neutron activation analysis

    International Nuclear Information System (INIS)

    Benedik, Ljudmila; Repinc, Urska; Byrne, Anthony R.; Stegnar, Peter

    2002-01-01

    Radiochemical neutron activation analysis (RNAA) is an excellent method for determining uranium and thorium; it offers unique possibilities for their ultratrace analysis using selective radiochemical separations. Regarding the favourably sensitive nuclear characteristics of uranium and of thorium with respect to RNAA, but the different half-lives of their induced nuclides, two different approaches were used. In the first approach uranium and thorium were determined separately via 239 U, 239 Np and 233 Pa. In the second approach these elements were 239 239 233 determined simultaneously in a single sample using U and/or Np and Pa. Isolation of induced nuclides was based on separation by extraction and/or anion exchange chromatography. Chemical yields were measured in each sample aliquot using added 235 U, 238 Np and 231 Pa radioisotopic tracers. (author)

  9. Determination of mercury in biologycal samples by radiochemical neutron activation analysis

    International Nuclear Information System (INIS)

    Suc, N.V.

    1989-01-01

    The radiochemical neutron activation analysis was applied to determine contents of mercury in biological samples. Samples were digested in mixing of H 2 SO 4 and HNO 3 acid. After extraction of mercury by Ni-Ditiodietylphosphoric acid in carbontetrachloride, mercury was back extracted by 5% KI solution. Contents of mercury from five samples of fish was determined by this method. The accuracy of the method was checked by comparing it with NBS standard samples and results are good agreement

  10. Phosphorus Determination by Derivative Activation Analysis: A Multifaceted Radiochemical Application.

    Science.gov (United States)

    Kleppinger, E. W.; And Others

    1984-01-01

    Although determination of phosphorus is important in biology, physiology, and environmental science, traditional gravimetric and colorimetric methods are cumbersome and lack the requisite sensitivity. Therefore, a derivative activation analysis method is suggested. Background information, procedures, and results are provided. (JN)

  11. Radiochemical analysis - a survey of its present state

    International Nuclear Information System (INIS)

    Kosta, L.

    1986-01-01

    Recent decline in the utilization of nuclear activation analysis is in part the consequence of diminished interest in nuclear energy and of a parallel decrease in the availability of irradiation facilities. Associated radiation is another important factor making nuclear techniques less popular. Progress in other analytical approaches currently reduces the share of activation analysis in the total output of analytical data. Thermal neutron activation analysis specifically is indispensable in providing multielement analytical data at low concentration levels for most environmental and geological research projects. High technologies involving less common or high-purity materials also need supporting results by this technique which offers high sensitivity and is not affected by blanks. Recent development of powerful computer programs for optimization of analytical parameters and for deconvolution of complex spectra, together with easy adaptation to automated operation, enhance the instrumental capabilities of nuclear activation techniques. (orig.) [de

  12. Radiochemical neutron activation analysis for trace elements of basic ingredients of pan

    International Nuclear Information System (INIS)

    Zaidi, J.H.; Arif, M.; Fatima, I; Qureshi, I.H.

    2002-01-01

    Extensive use of pan, by one-tenth of world's population, entails the evaluation of trace element contents in its ingredients. Radiochemical neutron activation analysis (RNAA) was developed and successfully employed to determine the concentration of 36 trace elements (essential, toxic and nonessential) in its four basic ingredients, leaf of betel pepper, betel nut, catechu and lime. The radiochemical separation methodology has significantly improved the detection limits of most of these elements due to suppression of Compton background. Base-line values of certain toxic and essential elements in these ingredients is provided. The daily intake of essential and toxic elements through pan was estimated and compared with the recommended values. The cumulative intake of Mn is four times higher than the recommended value and that of toxic elements is well below the tolerance limits. (author)

  13. Some problems concenrning the use of automated radiochemical separation systems in destructive neutron activation analysis

    International Nuclear Information System (INIS)

    Nagy, L.G.; Toeroek, G.

    1977-01-01

    The present state of a long term program is reviewed. It was started to elaborate a remote controlled automated radiochemical processing system for the neutron activation analysis of biological materials. The system is based on wet ashing of the sample followed by reactive desorption of some volatile components. The distillation residue is passed through a series of columns filled with selective ion screening materials to remove the matrix activity. The solution is thus ''stripped'' from the interfering radioions, and it is processed to single-elements through group separations using ion-exchange chromatographic techniques. Some special problems concerning this system are treated. (a) General aspects of the construction of a (semi)automated radiochemical processing system are discussed. (b) Comparison is made between various technical realizations of the same basic concept. (c) Some problems concerning the ''reconstruction'' of an already published processing system are outlined. (T.G.)

  14. Progress on Radiochemical Analysis for Nuclear Waste Management in Decommissioning

    DEFF Research Database (Denmark)

    Hou, Xiaolin; Qiao, Jixin; Shi, Keliang

    With the increaed numbers of nuclear facilities have been closed and are being or are going to be decommissioned, it is required to characterise the produced nuclear waste for its treatment by identification of the radionuclides and qualitatively determine them. Of the radionuclides related...... separation of radionuclides. In order to improve and maintain the Nodic competence in analysis of radionculides in waste samples, a NKS B project on this topic was launched in 2009. During the first phase of the NKS-B RadWaste project (2009-2010), a good achivement has been reached on establishment...... of collaboration, identifing the requirements from the Nordic nuclear industries and optimizing and development of some analytical methods (Hou et al. NKS-222, 2010). In the year 2011, this project (NKS-B RadWaste2011) continued. The major achievements of this project in 2011 include: (1) development of a method...

  15. Trace analysis measurements in high-purity aluminium by means of radiochemical neutron and proton activation analysis

    International Nuclear Information System (INIS)

    Egger, K.P.

    1987-01-01

    The aim of the study consisted in the development of efficient radiochemical composite processes and activation methods for the multi-element determination of traces within the lower ng range in high-purity aluminium. More than 50 elements were determined with the help of activation with reactor neutrons; the selective separation of matrix activity (adsorption with hydrated antimony pentoxide) led to a noticeable improvement of detectability, as compared with instrumental neutron activation analysis. Further improvements were achieved with the help of radiochemical group separations in ion exchangers or with the help of the selective separation of the pure beta-emitting elements. Over 20 elements up to high atomic numbers were determined by means of activating 13 MeV protons and 23 Me protons. In this connection, improvements of the detection limit by as a factor of 10 were achieved with radiochemical separation techniques, as compared with pure instrumental proton activation analysis. (RB) [de

  16. Radiochemical procedures and techniques

    International Nuclear Information System (INIS)

    Flynn, K.

    1975-04-01

    A summary is presented of the radiochemical procedures and techniques currently in use by the Chemistry Division Nuclear Chemistry Group at Argonne National Laboratory for the analysis of radioactive samples. (U.S.)

  17. Trace element evaluation of different varieties of chewing gum by radiochemical neutron activation analysis

    International Nuclear Information System (INIS)

    Zaidi, J.H.; Arif, M.; Fatima, I.; Ahmad, S.; Qureshi, I.H.

    2000-01-01

    Extensive use of chewing gums, by children in particular, entails the evaluation of trace element contents in them. Radiochemical neutron activation analysis (RNAA) was successfully employed to determine the concentration of 35 trace elements (essential, toxic and nonessential) in eight different brands of chewing gum generally consumed in Rawalpindi/Islamabad area. Comparison of trace element data of our work with literature has been presented. None of the elements detected in the brands of chewing gum examined was found to be present at a level representing a substantial contribution to the total dietary intake of the element. (author)

  18. Radiochemical analysis of radio-nuclides in sea water collected near Bikini Atoll

    Energy Technology Data Exchange (ETDEWEB)

    Miyake, Y; Sugiura, Y

    1955-01-01

    A radiochemical analysis of sea water containing fission materials collected near Bikini Atoll in June, 1954, was performed. The sea water was boiled with hydrochloric acid, iron and lanthanum salts each 5 mg as Fe and La were added to it. They were precipitated as hydroxide, which was dissolved in hydrochloric acid and ferric chloride was extracted with ethyl ether. The remaining solution was evaporated to dryness and the residue was dissolved in hydrochloric acid. Using the latter solution the group separation was done with cation exchanger resins.

  19. Determination of chromium, cobalt and nickel in tissue samples by radiochemical activation analysis

    International Nuclear Information System (INIS)

    Reisell, A.; Lakomaa, E.L.

    1983-03-01

    A radiochemical neutron activation analysis method for the determination of chromium, cobalt and nickel in tissue samples. A radiochemical neutron activation analysis method for the determination of chromium, cobalt and nickel has been developed. The destruction device used consisted of a combined wet-ashing-distillation and ion-exchange system. Six samples could be treated at the same time. The samples were wet-ashed with H*L2SO*L4-H*L2O*L2 mixture. Volatile elements were distilled as bromide compounds with HBr*H-. The distillation residue in 8M HCl was passed through hydrated antimony pentoxide (HAP) in order to remove disturbing *H2*H4Na-activity and through a Dowex 2 x 8 column so as to retain *H6*H0Co (formed from *H5*H8Ni). Chromium was elutriated from the column and precipitated as Cr(OH)*L3 for the removal of disturbing *H3*H2P-activity. The standards and samples were treated in a similar manner each so that the yield determination is not necessarily needed. The yields by tracer experiments were (43 +- 5) % for Cr, (93 +- 4) % for Co and (88 +- 14) % for Ni. The precision and accuracy of the method were studied by using reference materials of the National Bureau of Standards (NBS) and the International Atomic Energy Agency (IAEA)

  20. Radiochemical neutron activation analysis based multi-elemental analysis of high purity gallium

    International Nuclear Information System (INIS)

    Tashimova, F.A.; Sadikov, I.I; Salimov, M.I.; Zinov'ev, V.G.

    2006-01-01

    Full text: Gallium is one of the widely used materials in semiconductor and optoelectronics industry. Gallium is used to produce infrared detectors, piezoelectric sensors, high- and low-temperature transistors for space and defense technology. One of the most important requirements for semiconductor materials of gallium compounds is an excessive high purity for layers and films. Information on impurities (type of an impurity, concentration, character of distribution) is important as for better understanding of the physical and chemical processes taking place in formed semiconductor structures and for the 'know-how' of devices on their basis. The object of this work is to develop radiochemical neutron activation technique for analysis of high purity gallium. Irradiation of 0.1 g of gallium sample in neutron flux of 5·10 13 cm -2 s -1 for 5 hours will result in induced activity of more than 10 8 Bq, due to 72 Ga radionuclide, half-life of which is 14.1 hours. Therefore to perform instrumental NAA of gallium long period (10 day) cooling is required, and high sensitive determination of elements producing short- and long-lived radionuclides (T 1/2 72 Ga. We have studied the behavior of gallium in extraction-chromatographic system 'TBP-HCl'. The experiments have shown that higher factor of distribution (D) and capacity on gallium can be achieved when 'TBP-4M HCl' system is used. However more than 10 trace elements have high D and thus they cannot be separated from 72 Ga. To resolve the problem and increase the number of separated trace elements we have used preliminary satisfaction of chromatographic column with tellurium, which has D higher than the most of elements in 'TBP-4M HCl' system and thus suppresses extraction of elements. Distribution profile of gallium along the column and elution curve of 25 trace elements have been measured. Chemical yields of separated elements measured by using radiotracers are more than 93%. On the basis of the carried out researches

  1. Standard test methods for chemical, mass spectrometric, spectrochemical, nuclear, and radiochemical analysis of uranium hexafluoride

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2011-01-01

    1.1 These test methods cover procedures for subsampling and for chemical, mass spectrometric, spectrochemical, nuclear, and radiochemical analysis of uranium hexafluoride UF6. Most of these test methods are in routine use to determine conformance to UF6 specifications in the Enrichment and Conversion Facilities. 1.2 The analytical procedures in this document appear in the following order: Note 1—Subcommittee C26.05 will confer with C26.02 concerning the renumbered section in Test Methods C761 to determine how concerns with renumbering these sections, as analytical methods are replaced with stand-alone analytical methods, are best addressed in subsequent publications. Sections Subsampling of Uranium Hexafluoride 7 - 10 Gravimetric Determination of Uranium 11 - 19 Titrimetric Determination of Uranium 20 Preparation of High-Purity U3O 8 21 Isotopic Analysis 22 Isotopic Analysis by Double-Standard Mass-Spectrometer Method 23 - 29 Determination of Hydrocarbons, Chlorocarbons, and Partially Substitut...

  2. Project Title: Radiochemical Analysis by High Sensitivity Dual-Optic Micro X-ray Fluorescence

    International Nuclear Information System (INIS)

    Havrilla, George J.; Gao, Ning

    2002-01-01

    A novel dual-optic micro X-ray fluorescence instrument will be developed to do radiochemical analysis of high-level radioactive wastes at DOE sites such as Savannah River Site and Hanford. This concept incorporates new X-ray optical elements such as monolithic polycapillaries and double bent crystals, which focus X-rays. The polycapillary optic can be used to focus X-rays emitted by the X-ray tube thereby increasing the X-ray flux on the sample over 1000 times. Polycapillaries will also be used to collect the X-rays from the excitation site and screen the radiation background from the radioactive species in the specimen. This dual-optic approach significantly reduces the background and increases the analyte signal thereby increasing the sensitivity of the analysis. A doubly bent crystal used as the focusing optic produces focused monochromatic X-ray excitation, which eliminates the bremsstrahlung background from the X-ray source. The coupling of the doubly bent crystal for monochromatic excitation with a polycapillary for signal collection can effectively eliminate the noise background and radiation background from the specimen. The integration of these X-ray optics increases the signal-to-noise and thereby increases the sensitivity of the analysis for low-level analytes. This work will address a key need for radiochemical analysis of high-level waste using a non-destructive, multi-element, and rapid method in a radiation environment. There is significant potential that this instrumentation could be capable of on-line analysis for process waste stream characterization at DOE sites

  3. Determination of individual rare earth elements in Vietnamese monazite by radiochemical neutron activation analysis

    International Nuclear Information System (INIS)

    Nguyen Van Suc; Nguyen Mong Sinh

    1993-01-01

    Radiochemical neutron activation analysis (RNAA) has been applied for determination of rare earth elements (REE) in Vietnamese monazite. The chemical separation procedure used is based on the chromatographic elution of rare earth groups, after the separation of 233 Pa(Th) in irradiated monazite samples by coprecipitation with MnO 2 , the rare earth elements were retained by Biorad AG1 x 8 resin column in 10% 15.4M HNO 3 -90% methanol solution. The elution of heavy rare earth (HREE) and middle rare earth (MREE) groups was carried out with 10% 1M HNO 3 - 90% methanol and 10% 0.05M HNO 3 -90% methanol solution, respectively; while the light rare earths (LREE) were eluted from the column by 0.1M HNO 3 solution. The accuracy of the method was checked by the analysis of granodiorite GSP-I and the rare earth values were in good agreement. (author) 7 refs.; 3 tabs

  4. Determination of gold and platinum in biological materials by radiochemical neutron activation analysis using electrolytic separation of gold

    International Nuclear Information System (INIS)

    Reitz, B.; Heydorn, K.

    1993-01-01

    A new method is presented for the determination of Au and Pt in biological materials based on neutron activation analysis with radiochemical separation of gold. Separation of gold by electrolytic deposition on a niobium cathode ascertains thee highest radiochemical purity without any interference from calcium or other major elements. With 199 Au as indicator for platinum the gold content of the sample not only strongly affects the limit of detection, but also causes interference by double neutron capture. Replicate analyses of BCR Certified Reference Materials No. 184, 185 and 186 were carried out. (author) 18 refs.; 3 figs.; 2 tabs

  5. Preparation, radiochemical analysis and biodistribution of 99mTc-dihydrobis(1-pyrazolyl)borate

    International Nuclear Information System (INIS)

    Owunwanne, A.; Abdel-Dayem, H.; Yacoub, T.

    1987-01-01

    Optimum preparation of 99m Tc-dihydrobis(1-pyrazolyl)borate ( 99m Tc-HBPz 2 ) was done by mixing 1.4 mg/ml HBPz 2 and 1.0 mg/ml of stanous PYP. Radiochemical analysis of the preparation using paper chromatography (PC), thin layer chromatography (TLC) and high performance liquid chromatography (HPLC) indicated a stable product with one major component. The labelling efficiency was approximately 90%. Animal biodistribution studies performed in mice showed that most of the injected radioactivity was confined to the liver, kidney, lungs, intestine and heart. The heart to blood ratio was small but persisted up to 3 hrs. after the injection. (orig.) [de

  6. Radiochemical neutron activation analysis for trace elements evaluation of human milk

    International Nuclear Information System (INIS)

    Gill, K.P.; Zaidi, J.H.; Ahmad, S.

    2003-01-01

    The principal objective pursued in this study is to establish the base-line data on the status of elemental composition in human milk from Pakistani subjects of Rawalpindi/Islamabad area. Radiochemical neutron activation analysis (RNAA) methodology was developed and successfully employed to determine the concentration of 18 minor and trace elements (essential, toxic and nonessential) in human milk. This methodology has significantly improved the detection limits of most of these elements due to suppression of Compton background. The data provide the base-line values of these elements in human milk of low- and medium-income group subjects of the region. The results obtained show good compatibility with the data reported by the WHO on elemental composition of human milk from different geological regions. (orig.)

  7. Continuous radiochemical analysis of fission products in a nuclear reactor water coolant

    International Nuclear Information System (INIS)

    Moskvin, L.N.; Zakharov, L.K.; Leont'ev, G.G.; Mel'nikov, V.A.; Orlenkov, I.S.; Slutskij, G.K.

    1975-01-01

    Method for continuous radiochemical analysis of I, Cs, Ba, Sr and Ce isotopes in a reactor water heat-transfer agent was developed. A continuous two-dimensional chromatographic process of complex mixtures separation of substances proved to be feasible on several parallel sorbent layers, which moved at constant velocities and separated by stationary intermediate collectors. Tests on model solutions containing I, Ce, Cs and Ba isotopes and on heat-carrier samples showed quantitative separation of elements. The results were indicative of a basic possibility of using multisorbent chromatographs for continuous control of multicomponent mixtures, particularly for control of radioactive fission product compositions in water heat-transfer agents in nuclear power plants. A diagram is shown for a two-dimensional chromatographic separation of a multicomponent mixture. Also shown is a flow chart of an installation for continuous control of iodine and cesium isotope activities

  8. Development of a radiochemical neutron activation analysis procedure for determination of rhenium in biological and environmental samples at ultratrace level

    Czech Academy of Sciences Publication Activity Database

    Kučera, Jan; Byrne, A. R.; Mizera, Jiří; Lučaníková, M.; Řanda, Zdeněk

    2006-01-01

    Roč. 269, č. 2 (2006), s. 251-257 ISSN 0236-5731 R&D Projects: GA ČR(CZ) GA203/04/0943 Institutional research plan: CEZ:AV0Z10480505 Keywords : radiochemical neutron activation analysis * rhenium * biological and environmental samples Subject RIV: CB - Analytical Chemistry, Separation Impact factor: 0.509, year: 2006

  9. Radiochemical neutron activation analysis of high pure palladium and platinum by ion exchange chromatography

    International Nuclear Information System (INIS)

    Sadikov, I.I.; Zinov'ev, V.G.; Sadikova, Z.O.; Salimov, M.I.

    2006-01-01

    Full text: The palladium and platinum are widely used for jewel manufacture because of their beautiful white color. However the most part of these metals are widely adopted in the world as catalysts. Many works on analytical chemistry of platinum group elements published during last years are devoted to determination of platinum and palladium in other materials. There are no articles on analysis technique of the palladium and platinum purity published during last 20 years. Available publications are very old and are published till 70th of the last century, and implement chemical and spectral methods. At the same time, the palladium and platinum are very suitable for NAA. Therefore the purpose of our research was development of high-sensitivity and multielement techniques of radiochemical neutron activation analysis of a high pure palladium and platinum. Research of nuclear characteristics of palladium and platinum has shown that radioactive nuclides with different yields are formed under the reactor neutrons. 109 , 111 , 111m Pd, 109m , 111 Ag, 191 , 197 , 199 Pt, 199 Au are the most important among them. 109Pd separation factor is equal to 1*10 5 at palladium analysis, whereas 197 Pt and 199 Au separation factor is equal to 1*10 4 at the platinum analysis every other day after irradiation. Palladium and platinum can be separated by precipitation, extraction and ion exchange methods. For separation of radioactive nuclide of the matrix elements from the impurity elements we used ion exchange chromatography system Dowex-1x8 - 1 M HNO 3 for palladium and Dowex-1x8 - 0.1 M HNO 3 for platinum. At the HNO 3 acid concentrations variation from 0,1 M to 1 M more then 25 elements have distribution factors less than 1 and 10 elements have distribution factors 5 while matrix elements have distribution factors higher than 100. It allows an effective separation of these elements from palladium and platinum. Optimum sizes of the chromatographic column and the column effluent

  10. Determination of thorium in native gold by radiochemical neutron activation analysis

    International Nuclear Information System (INIS)

    Liu, Y.; Kraehenbuehl, U.

    1995-01-01

    Thorium concentrations in 11 native gold samples from different sources, e.g. placer gold, vein and lode gold were determined. Thorium was determined by radiochemical separation and measurement of protactinium from irradiated native gold samples. The chemical yield of the separation procedures is 90%. Other elements were measured by gamma-ray spectroscopy. The radiochemical separation procedures described in this work make accurate determination of Th concentrations in native gold at picogram concentrations possible. (orig.)

  11. Evolution and applications of radiochemical procedures. From Marie Curie to Darleane Hoffman

    International Nuclear Information System (INIS)

    Contis, E. T.; Rengan, K.

    1996-01-01

    Marie Curie carried out the first radiochemical separations which eventually lead to the discovery of polonium and radium, two new elements. Nearly a century later Darleane Hoffman and her collaborators are devising new radiochemical separation procedures for studying the chemical properties of newly discovered transactinide elements. Safety requirements as well as changes necessitated by fast decaying radionuclides have transformed the nature of radiochemical separations. Further, applications in a wide variety of areas such as analysis of trace elements in food to radioimmunoassay have broadened the use of radiochemical separations. Examples of some early, historically important, radiochemical separations are described in this article. In addition, recent trends in the use of radiochemical separations in neutron activation analysis, in dating applications, in fission product studies and in the study of transactinide elements are briefly described with specific examples. (author). 52 refs

  12. Evaluation of radiochemical neutron activation analysis methods for determination of arsenic in biological materials.

    Science.gov (United States)

    Paul, Rick L

    2011-01-01

    Radiochemical neutron activation analysis (RNAA) with retention on hydrated manganese dioxide (HMD) has played a key role in the certification of As in biological materials at NIST. Although this method provides very high and reproducible yields and detection limits at low microgram/kilogram levels, counting geometry uncertainties may arise from unequal distribution of As in the HMD, and arsenic detection limits may not be optimal due to significant retention of other elements. An alternate RNAA procedure with separation of arsenic by solvent extraction has been investigated. After digestion of samples in nitric and perchloric acids, As(III) is extracted from 2 M sulfuric acid solution into a solution of zinc diethyldithiocarbamate in chloroform. Counting of (76)As allows quantitation of arsenic. Addition of an (77)As tracer solution prior to dissolution allows correction for chemical yield and counting geometries, further improving reproducibility. The HMD and solvent extraction procedures for arsenic were compared through analysis of SRMs 1577c (bovine liver), 1547 (peach leaves), and 1575a (pine needles). Both methods gave As results in agreement with certified values with comparable reproducibility. However, the solvent extraction method yields a factor of 3 improvement in detection limits and is less time-consuming than the HMD method. The new method shows great promise for use in As certification in reference materials.

  13. Method Development of Cadmium Investigation in Rice by Radiochemical Neutron Activation Analysis

    International Nuclear Information System (INIS)

    Promsawad, Arunee; Pareepart, Ratirot; Laoharojanaphand, Sirinart; Arunee, Kongsakpaisal

    2007-08-01

    Full text: A radiochemical neutron activation analysis for the determination of cadmium was investigated. A chemical separation of cadmium utilized ion exchange chromatography of a strong basic anion-exchange resin BIO-RAD 1X 8 (Chloride form). The adsorbing medium of 2M HCl was found to be the most suitable among the concentration attempted (2, 4, 6, 8 and 10M HCl) and the eluent for desorption of the cadmium from column was 8M NH 3 solution. A chemical yield of 95% was found. The method has been evaluated by analyzing certified reference materials with 0.5.g/g (SRM 1577b, Bovine Liver) and 2.48.g/g (SRM 1566b, Oyster Tissue) cadmium. The agreement of the result with certified values is within 92% for Bovine Liver and 96% for Oyster Tissue. The method developed was applied to determine the cadmium concentrations in contaminated Thai rice. It was found that the cadmium concentrations ranged from 7.4 to 578.9 ppb

  14. Use of reference materials for quality control of elemental analysis by neutron activation with radiochemical separation

    International Nuclear Information System (INIS)

    Woittiez, J.R.W.

    1990-01-01

    This paper describes the use of certified reference materials to monitor the long-term quality of radiochemical separations. The practical limitations which determine the actual design of the quality control are discussed. The hypothesis that the high yield of the radiochemical separation will be constant with time has been checked and validated for the elements Zn, Fe, Co, Cd, Mo and to a lesser extent for W and Th using NBS SRM 1577A, BCR CRM 274 and IAEA RM A-11. This validation could not be made for the elements Cr, Au, and Ag. Especially for Cr there is a serious lack of appropiate certified reference materials. (orig.)

  15. On the methodology of radiochemical neutron activation analysis of noble metals

    International Nuclear Information System (INIS)

    Chai, C.F.; Ma, S.L.; Mao, X.Y.; Liao, K.N.; Liu, W.C.

    1986-01-01

    Two different radiochemical procedures were developed: chelate ion resin exchange and amine solvent extraction. Two kinds of new Chinese chelate resins (NANKAI-3926 and BEI-5) and a new long-chain primary amine N 1923 were compared with Srafion NMRR and the tertiary amine N 235 in absorption performance of noble metals, respectively. Influences of various experimental conditions, e.g. sample digestion, acidity, equilibrium time, as well as elution of noble metals, on analytical sensitivity and chemical yield were discussed. Combining with neutron activation, the radiochemical separation procedures developed were used to determine the noble metal contents in the geological samples from Permina/Triassic boundary in South China. (author)

  16. Determination of heavy metal pollutants such as Hg, Zn, Se, Cd, and Cu in aquatic environment of Thana Creek by radiochemical thermal neutron activation analysis

    International Nuclear Information System (INIS)

    khan, S.Z.; Shah, P.K.; Ramani Rao, V.; Turel, Z.r.; Haldar, B.C.

    1984-01-01

    A rapid method has been developed for the radiochemical separation of Cu, As, Se, Hg, and Zn from thermal neutron irradiated environmental samples. The concentration of the elements in the environmental samples has been ascertained by radiochemical neutron activation analysis. The accuracy, precision and sensitivity of the method has been determined. The results of the analysis indicates the location of maximum pollution of the aquatic environment and the extent of pollution in the 5 locations of Thana Creek. 1 reference, 3 tables

  17. The Northern Marshall Islands radiological survey: A quality control program for radiochemical and gamma spectroscopy analysis

    International Nuclear Information System (INIS)

    Kehl, S.R.; Mount, M.E.; Robison, W.L.

    1995-09-01

    From 1979 to 1989, approximately 25,000 Post Northern Marshall Islands Radiological Survey (PNMIRS) samples were collected, and over 71,400 radiochemical and gamma spectroscopy analyses were performed to establish the concentration of 90 Sr, 137 Cs, 241 Am, and plutonium isotopes in soil, vegetation, fish, and animals in the Northern Marshall Islands. While the Low Level Gamma Counting Facility (B379) in the Health and Ecological Assessment (HEA) division accounted for over 80% of all gamma spectroscopy analyses, approximately 4889 radiochemical and 5437 gamma spectroscopy analyses were performed on 4784 samples of soil, vegetation, terrestrial animal, and marine organisms by outside laboratories. Four laboratories were used by Lawrence Livermore National Laboratory (LLNL) to perform the radiochemical analyses: Thermo Analytical Norcal, Richmond, California (TMA); Nuclear Energy Services, North Carolina State University (NCSU); Laboratory of Radiation Ecology, University of Washington (LRE); and Health and Ecological Assessment (HEA) division, LLNL, Livermore, California. Additionally, LRE and NCSU were used to perform gamma spectroscopy analyses. The analytical precision and accuracy were monitored by including blind duplicates and natural matrix standards in each group of samples analyzed. On the basis of reported analytical values for duplicates and standards, 88% of the gamma and 87% of the radiochemical analyses in this survey were accepted. By laboratory, 93% of the radiochemical analyses by TMA; 88% of the gamma-ray spectrometry and 100% of the radiochemistry analyses by NCSU; 89% of the gamma spectroscopy and 87% of the radiochemistry analyses by LRE; and 90% of the radiochemistry analyses performed by HEA's radiochemistry department were accepted

  18. Statistical analysis of radiochemical measurements of TRU radionuclides in REDC waste

    International Nuclear Information System (INIS)

    Beauchamp, J.; Downing, D.; Chapman, J.; Fedorov, V.; Nguyen, L.; Parks, C.; Schultz, F.; Yong, L.

    1996-10-01

    This report summarizes results of the study on the isotopic ratios of transuranium elements in waste from the Radiochemical Engineering Development Center actinide-processing streams. The knowledge of the isotopic ratios when combined with results of nondestructive assays, in particular with results of Active-Passive Neutron Examination Assay and Gamma Active Segmented Passive Assay, may lead to significant increase in precision of the determination of TRU elements contained in ORNL generated waste streams

  19. Analysis of the radiochemical purity of 18F-FDG by HPLC

    International Nuclear Information System (INIS)

    Chen Liguang; Tang Anwu; He Shanzhen; Chen Yulong

    2001-01-01

    The radiochemical purity (RCP) of 18 F-FDG is analyzed by HPLC. Eighty-five percent acetonitrile is used as the eluting solution. Carbon hydrate column is used as separation column. The t R of 18 F - is 6.50 min and 18 F-FDG is 9.00 min. HPLC take less time and has higher sensitivity than TLC for the same sample at the same time. So HPLC excels TLC in analyzing RCP of 18 F-FDG

  20. Radiochemical solar neutrino experiments

    International Nuclear Information System (INIS)

    Rich, R.; Spiro, M.

    1993-01-01

    This review covers the three presently running radiochemical solar neutrino experiments, namely the Chlorine, SAGE, and GALLEX experiments. The focus of the review is on a discussion of statistical consistency checks of the available data. The chlorine radiochemical experiment is conceptually simple and shows no strong indication of any statistical anomalies. It still forms the basis of the solar neutrino problem. Each of the two gallium experiments show internal statistical consistency. SAGE's recent preliminary results are consistent with the published GALLEX results. If this convergence is confirmed by a more definitive analysis, this would suggest that the combined result of the two gallium experiments, SAGE and GALLEX, be used for comparisons with theoretical expectations. 5 refs., 15 figs

  1. Pollution of agricultural crops with lanthanides, thorium and uranium studied by instrumental and radiochemical neutron activation analysis

    International Nuclear Information System (INIS)

    Kucera, J.; Mizera, J.; Randa, Z.; Vavrova, M.

    2007-01-01

    The lanthanide elements, Th and U were measured in soils and agricultural crops collected in an area polluted by emissions from a phosphate fertilizer plant. Concentrations of the above elements in the soil and crop samples were determined by instrumental neutron activation analysis (INAA). Selected crop samples were also analyzed using radiochemical neutron activation analysis (RNAA) based on alkaline-oxidative fusion of the irradiated samples followed by precipitation of REE oxalates. Elevated levels of lanthanides, Th and U were found in some samples, especially in wheat chaff and parsley. (author)

  2. Cadmium determination in biological samples using neutron activation analysis with radiochemical separations

    International Nuclear Information System (INIS)

    Munoz A, Luis; Gras R, Nuri

    2005-01-01

    Chile has 7500 km of coastline on the Southern Pacific ocean,with about 4500 km of continental coastline that contains a variety of different geographical zones.This variety means that there is a great diversity of marine resources such as fish, shellfish and seaweeds. The utilization of these resources has been increasing in recent years making this sector an economically important one. The catch as of May 2002 came to 1.9 million tons and exports of the different species amounted to US$611.5 million as of April.But this important economic resource is being threatened by the technical demands imposed by importing countries, mainly the specific requirements for sanitary certification for fishery export products, depending on the markets of destination. The chemical element cadmium is one of the most strictly controlled elements due some shellfish accumulate a large amount of this element and to its high toxicity. The Chilean standard's analytical procedures for cadmium determination in hydro biological products, which must be met by laboratories that certify and control these products for export, are now being evaluated. Through its Chemical Metrology Unit, the Chilean Nuclear Energy Commission is strongly supporting this sector by preparing the secondary reference or control materials, and it has developed and implemented nuclear analytical methods for the certification of these materials, which will be used mostly in collaborative studies. This work describes the methodology developed for the determination of cadmium in biological samples, particularly in shellfish and fish. The method is based on neutron activation analysis with radiochemical separations, using the radioisotopes 115 Cd and 115m In, generated in the samples by bombarding with neutrons in a nuclear reactor. The samples were digested at 110 o C with H 2 SO 4 and H 2 O 2 and then the radioactive cadmium element was separated from the other elements present in the samples using a Bio Rad AG 2-X8

  3. The platinum group elements and gold: analysis by radiochemical and instrumental neutron activation analysis and relevance to geological exploration and related problems

    Energy Technology Data Exchange (ETDEWEB)

    Reeves, S.; Plimer, I. R. [Melbourne Univ., Parkville, VIC (Australia). School of Physics

    1996-12-31

    This paper presents an overview of research conducted with the support of the Australian Institute of Nuclear Science and Engineering, at the University of Melbourne, School of Earth Sciences, Radiochemical Neutron Activation Laboratory. The primary objective of this research is to realize the high potential of the platinum group elements (PGE) and gold to the solution of petrogenetic problems, the study of magma generation and magmatic processes in mafic/ultramafic rock suites, as tracers in hydrothermal ore formation. The PGEs (Os, Ru, Ir, Pt, Pd and Rh) are among the least abundant of all elements on earth with unique properties such as high melting points, high electrical and thermal conductivity, high density, strength and toughness as alloys. They exhibit both siderophile and chalcophile characteristics and are valuable tools in providing information about magmatic processes, in particular S-saturation, as well as crystal fractionation trends. Two distinct groups of PGEs are discerned; the IPGEs (Ru, Os, Ir) and the PPGEs (Pt, Pd, Rh, Au) on the basis of their behaviour during fractionation processes. Using chondrite normalized PGE patterns it is possible to distinguish between sulphides that segregated from primitive magmas, such as komatiites, and sulphides which segregated from more fractionated magmas, such as tholeiites. It is critical to the understanding of these processes to be able to analyse key elements, such as the PGE and gold, in the parts per billion to parts per trillion range. Platinum group elements and Au were determined by radiochemical neutron activation analysis using a modified NiS fire-assay preconcentration technique, adapted from procedures first used by Robert, R.V. D. and van Wyk, E. (1975) . Detection limits are generally 0.005-0.01 ppb (Au and Ir), 0.1-0.2 ppb (Pd and Pt), and 0.1-0.5 ppb for Ru. 9 refs.

  4. The platinum group elements and gold: analysis by radiochemical and instrumental neutron activation analysis and relevance to geological exploration and related problems

    International Nuclear Information System (INIS)

    Reeves, S.; Plimer, I. R.

    1996-01-01

    This paper presents an overview of research conducted with the support of the Australian Institute of Nuclear Science and Engineering, at the University of Melbourne, School of Earth Sciences, Radiochemical Neutron Activation Laboratory. The primary objective of this research is to realize the high potential of the platinum group elements (PGE) and gold to the solution of petrogenetic problems, the study of magma generation and magmatic processes in mafic/ultramafic rock suites, as tracers in hydrothermal ore formation. The PGEs (Os, Ru, Ir, Pt, Pd and Rh) are among the least abundant of all elements on earth with unique properties such as high melting points, high electrical and thermal conductivity, high density, strength and toughness as alloys. They exhibit both siderophile and chalcophile characteristics and are valuable tools in providing information about magmatic processes, in particular S-saturation, as well as crystal fractionation trends. Two distinct groups of PGEs are discerned; the IPGEs (Ru, Os, Ir) and the PPGEs (Pt, Pd, Rh, Au) on the basis of their behaviour during fractionation processes. Using chondrite normalized PGE patterns it is possible to distinguish between sulphides that segregated from primitive magmas, such as komatiites, and sulphides which segregated from more fractionated magmas, such as tholeiites. It is critical to the understanding of these processes to be able to analyse key elements, such as the PGE and gold, in the parts per billion to parts per trillion range. Platinum group elements and Au were determined by radiochemical neutron activation analysis using a modified NiS fire-assay preconcentration technique, adapted from procedures first used by Robert, R.V. D. and van Wyk, E. (1975) . Detection limits are generally 0.005-0.01 ppb (Au and Ir), 0.1-0.2 ppb (Pd and Pt), and 0.1-0.5 ppb for Ru. 9 refs

  5. The platinum group elements and gold: analysis by radiochemical and instrumental neutron activation analysis and relevance to geological exploration and related problems

    Energy Technology Data Exchange (ETDEWEB)

    Reeves, S; Plimer, I R [Melbourne Univ., Parkville, VIC (Australia). School of Physics

    1997-12-31

    This paper presents an overview of research conducted with the support of the Australian Institute of Nuclear Science and Engineering, at the University of Melbourne, School of Earth Sciences, Radiochemical Neutron Activation Laboratory. The primary objective of this research is to realize the high potential of the platinum group elements (PGE) and gold to the solution of petrogenetic problems, the study of magma generation and magmatic processes in mafic/ultramafic rock suites, as tracers in hydrothermal ore formation. The PGEs (Os, Ru, Ir, Pt, Pd and Rh) are among the least abundant of all elements on earth with unique properties such as high melting points, high electrical and thermal conductivity, high density, strength and toughness as alloys. They exhibit both siderophile and chalcophile characteristics and are valuable tools in providing information about magmatic processes, in particular S-saturation, as well as crystal fractionation trends. Two distinct groups of PGEs are discerned; the IPGEs (Ru, Os, Ir) and the PPGEs (Pt, Pd, Rh, Au) on the basis of their behaviour during fractionation processes. Using chondrite normalized PGE patterns it is possible to distinguish between sulphides that segregated from primitive magmas, such as komatiites, and sulphides which segregated from more fractionated magmas, such as tholeiites. It is critical to the understanding of these processes to be able to analyse key elements, such as the PGE and gold, in the parts per billion to parts per trillion range. Platinum group elements and Au were determined by radiochemical neutron activation analysis using a modified NiS fire-assay preconcentration technique, adapted from procedures first used by Robert, R.V. D. and van Wyk, E. (1975) . Detection limits are generally 0.005-0.01 ppb (Au and Ir), 0.1-0.2 ppb (Pd and Pt), and 0.1-0.5 ppb for Ru. 9 refs.

  6. Determination of trace amounts of uranium in silicate materials by means of neutron activation analysis involving rapid radiochemical separation

    International Nuclear Information System (INIS)

    Ebihara, M.; Tomura, Kenji; Masutani, M.

    1987-01-01

    Uranium is determined in silicate materials such as standard rocks and a meteorite by radiochemical neutron activation analysis. The gamma-ray intensity of 239 U was measured with a planar type pure germanium detector system. The obtained data are mostly consistent with the literature values. Compared with a non-destructive method, the present method was found to improve the sensitivity by at least a factor of ten. Several errors which might be involved in the authors' RNAA procedures were examined and their degrees were evaluated. (author)

  7. Determination of isotopic ratios of osmium and ruthenium in meteorites by pretreatment and radiochemical neutron activation analysis

    International Nuclear Information System (INIS)

    Chinfang Chai; Yongzhong Liu; Xueying Mao

    1996-01-01

    The isotopic abundance ratios of 190 Os/ 184 Os and 96 Ru/ 102 Ru for the metal phases of the Jilin and Taonan stone meteorites were determined by pretreatment and radiochemical neutron activation analysis. All experimental factors affecting Os and Ru isotopic ratios were discussed, including sampling, standard, irradiation, separation and counting. The statistical errors of measurements for the 199 Os/ 184 Os ratio can be controlled within 1%. The experimental results indicate that the statistically significant anomalies of the 190 Os/ 184 Os and 96 Ru/ 102 Ru ratios have not been found relative to the terrestrial Os and Ru standards. (author). 6 refs., 1 fig., 5 tabs

  8. Chemical, radiochemical and structural properties of corrosion products on CANDU monel-400 boiler surfaces

    International Nuclear Information System (INIS)

    Rummery, T.E.; Scott, G.A.; Owen, D.G.; Tremaine, R.

    1980-09-01

    The surface of the primary-coolant side of a complete Monel-400 boiler tube removed from Douglas Point Nuclear Generating Station was subjected to a detailed analysis by scanning electron microscopy, energy dispersive X-ray spectrometry, X-ray diffraction and chemical analysis. The tube had been in operation for 420 effective full-power days. The major deposits found were metallic Cu and Ni with significant amounts of NiO, and the mixed cation spinel Ni sub(x) Fe sub(3-x) O 4 . The phase compostion, 60 Co activity, and distribution of deposits in the tube are consistent with changes in the degree of supersaturation due to the temperature gradient along the tube and with the thermodynamic stability of observed phases. The morphology of the deposit is controlled by hydrodynamic effects. (auth)

  9. Determination of selenium in roasted beans coffee samples consumed in Algeria by radiochemical neutron activation analysis method

    International Nuclear Information System (INIS)

    Messaoudi, Mohammed; Begaa, Samir; Hamidatou, Lylia; Salhi, M'hamed

    2018-01-01

    The essential trace element selenium is a focus of attention due to its effects on human health, there being consequences of both its deficiency and excess. Due to the ultra-trace content of selenium, the neutron activation analysis method (NAA) is difficult to apply. We therefore made use of the radiochemical neutron activation analysis (RNAA) to determine Se at low level concentrations in several consumed food items in Algeria. A radiochemical procedure based on liquid-liquid separation was established in our laboratory. In this research we focused on the determination of selenium in two species of coffee: Arabica and Robusta. The accuracy of the method was assessed by analyzing the certified reference material NIST-SRM 1573a (tomato leaves). The results obtained show a selenium variation from 0.025 to 0.052 μg/g in coffee beans and an average yield of the separation of about 85%. The results of this study were compared with those obtained with samples from Brazilian, Caribbean, Indian and Kenyan coffee beans.

  10. In vivo radiochemical properties of Tb-149: A new radiolanthanide for targeted cancer therapy

    International Nuclear Information System (INIS)

    Allen, B.J.; Beyer, G.J.; Morel, C.H.; Aleksandrova, Y.; Jahn, S.

    1996-01-01

    Full text: 149 Tb (4.15 h) decays by the emission of both 3.9 MeV alpha particles (17% branching) and positrons (4% branch), and uniquely combines both therapeutic and PET diagnostic properties. In this paper we report the production route, systemic studies of radio-lanthanides with ethylenediaminetetra methylene phosphonate (EDTMP) ligand, and the first 149 Tb phantom studies using PET. The radio-lanthanides used in this study were produced at the ISOLDE (isotope separator on-line) facility at CERN. They are produced carrier free, isotopically and chemically separated (isobaric separation using cation exchange chromatography) in a form suitable for protein labelling. Batches up to 20 mCi of 1 4 9T b are available. We have established relationships between biokinetics, EDTMP concentration, and the ionic radius of the radiolanthanide used. The tumour to liver ratio in mice reaches a maximum value at 1 mM 10 mM and decreases from 10 by almost two decades according to the ionic radius of the lanthanide. For Tb, a tumour to liver ratio of 5 can be obtained, similar to Gd. No significant differences in the uptake in bone for all lanthanides in the EDTMP system were observed. A fast blood clearance allows clear bone images to be obtained via PET at 60-90 min post-injection, as shown with rabbits using 142 Sm-EDTMP. The first phantom PET studies with 149 Tb are also reported. We conclude that the fast biokinetics and the alpha decay mode open up new possibilities for a more efficient endo-radionuclide therapy using EDTMP. The high purity of the 149T b (isotopically separated and carrier free) produced in this way makes it very suitable for the labelling of octretides

  11. Determination of rhenium in biological and environmental samples by radiochemical neutron activation analysis

    International Nuclear Information System (INIS)

    Kucera, J.; Mizera, J.; Randa, Z.; Byrne, A.R.; Lucanikova, M.

    2006-01-01

    Radiochemical neutron activation procedures using liquid-liquid extraction with tetraphenylarsonium chloride in chloroform from 1 M HCl and solid extraction with ALIQUAT 336 incorporated in a polyacrylonitrile binding matrix from 0.1 M HCl were developed for accurate determination of rhenium in biological and environmental samples at the sub-ng.g -1 level. Concentrations of Re in the range of 0.1 to 2.4 ng.g -1 were determined in several botanical reference materials (RM), while in a RM of road dust a value of approx. 10 ng.g -1 was found. Significantly elevated values of Re, up to 90 ng.g -1 , were found in seaweed (brown algae). Results for Re in the brown algae Fucus vesiculosus in which elevated 99 Tc values had previously been determined suggest possible competition between Re and Tc in the accumulation process. (author)

  12. Standard practices for dissolving glass containing radioactive and mixed waste for chemical and radiochemical analysis

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2000-01-01

    1.1 These practices cover techniques suitable for dissolving glass samples that may contain nuclear wastes. These techniques used together or independently will produce solutions that can be analyzed by inductively coupled plasma atomic emission spectroscopy (ICP-AES), inductively coupled plasma mass spectrometry (ICP-MS), atomic absorption spectrometry (AAS), radiochemical methods and wet chemical techniques for major components, minor components and radionuclides. 1.2 One of the fusion practices and the microwave practice can be used in hot cells and shielded hoods after modification to meet local operational requirements. 1.3 The user of these practices must follow radiation protection guidelines in place for their specific laboratories. 1.4 Additional information relating to safety is included in the text. 1.5 The dissolution techniques described in these practices can be used for quality control of the feed materials and the product of plants vitrifying nuclear waste materials in glass. 1.6 These pr...

  13. Standard test methods for chemical, mass spectrometric, spectrochemical, nuclear, and radiochemical analysis of nuclear-grade uranyl nitrate solutions

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1999-01-01

    1.1 These test methods cover procedures for the chemical, mass spectrometric, spectrochemical, nuclear, and radiochemical analysis of nuclear-grade uranyl nitrate solution to determine compliance with specifications. 1.2 The analytical procedures appear in the following order: Sections Determination of Uranium 7 Specific Gravity by Pycnometry 15-20 Free Acid by Oxalate Complexation 21-27 Determination of Thorium 28 Determination of Chromium 29 Determination of Molybdenum 30 Halogens Separation by Steam Distillation 31-35 Fluoride by Specific Ion Electrode 36-42 Halogen Distillate Analysis: Chloride, Bromide, and Iodide by Amperometric Microtitrimetry 43 Determination of Chloride and Bromide 44 Determination of Sulfur by X-Ray Fluorescence 45 Sulfate Sulfur by (Photometric) Turbidimetry 46 Phosphorus by the Molybdenum Blue (Photometric) Method 54-61 Silicon by the Molybdenum Blue (Photometric) Method 62-69 Carbon by Persulfate Oxidation-Acid Titrimetry 70 Conversion to U3O8 71-74 Boron by ...

  14. Use of 236Pu and 242Pu as a radiochemical tracer for estimation of Pu in bioassay samples by fission track analysis

    International Nuclear Information System (INIS)

    Sawant, Pramilla D.; Prabhu, Supreetha P.; Kalsi, P.C.

    2008-01-01

    236 Pu and 242 Pu are routinely used as radiochemical yield monitors in India for bioassay monitoring of occupational workers by alpha spectrometry. Fission Track Analysis (FTA) is also being standardized for trace level determination of Pu in bioassay samples. The present study, reports the utility of 236 Pu and 242 Pu as radiochemical tracers in estimation of Pu in bioassay samples by FTA technique. The advantages of using 236 Pu tracer in FTA over 242 Pu as well as the interference caused due to presence of 241 Pu in the bioassay samples of occupational workers handling power reactor grade Pu is discussed. (author)

  15. Standard test methods for chemical, mass spectrometric, spectrochemical, nuclear, and radiochemical analysis of nuclear-grade plutonium nitrate solutions

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 These test methods cover procedures for the chemical, mass spectrometric, spectrochemical, nuclear, and radiochemical analysis of nuclear-grade plutonium nitrate solutions to determine compliance with specifications. 1.2 The analytical procedures appear in the following order: Sections Plutonium by Controlled-Potential Coulometry Plutonium by Amperometric Titration with Iron(II) Plutonium by Diode Array Spectrophotometry Free Acid by Titration in an Oxalate Solution 8 to 15 Free Acid by Iodate Precipitation-Potentiometric Titration Test Method 16 to 22 Uranium by Arsenazo I Spectrophotometric Test Method 23 to 33 Thorium by Thorin Spectrophotometric Test Method 34 to 42 Iron by 1,10-Phenanthroline Spectrophotometric Test Method 43 to 50 Impurities by ICP-AES Chloride by Thiocyanate Spectrophotometric Test Method 51 to 58 Fluoride by Distillation-Spectrophotometric Test Method 59 to 66 Sulfate by Barium Sulfate Turbidimetric Test Method 67 to 74 Isotopic Composition by Mass Spectrom...

  16. Use of new composite materials for the determination of Cu, Cd, Mo, As, and Sb in biological samples by radiochemical neutron activation analysis

    Czech Academy of Sciences Publication Activity Database

    Lučaníková, M.; Kučera, Jan; Šebesta, F.; John, J.

    2006-01-01

    Roč. 269, č. 2 (2006), s. 463-468 ISSN 0236-5731 R&D Projects: GA ČR(CZ) GA203/04/0943 Institutional research plan: CEZ:AV0Z10480505 Keywords : radiochemical neutron activation analysis * separation using composite materials Subject RIV: CB - Analytical Chemistry, Separation Impact factor: 0.509, year: 2006

  17. 11th radiochemical conference

    International Nuclear Information System (INIS)

    Prasil, Z.

    1987-01-01

    The conference met in four sesions which discussed: Separation methods, Radioanalytical methods, Labelled compounds and Miscellaneous. The first session discussed extraction methods, ion exchange and chromatographic separation of radioisotopes. The second session heard papers on the application of these methods, e.g., in geochemistry, on the use of radioactive tracers in radiochemical analysis and the use of activation analysis in the determination of trace elements. The third session heard papers on the preparation of labelled organic compounds with isotopes 3 H, 14 C, radioiodine and 32 P, on the preparation of RIA kits and on the chemistry and radiopharmacology of technetium compounds. The other contributions which could not be heard in any of the three sessions discussed, e.g., the preparation of elements on the cyclotron and microtron, the production of a new 99m Tc-generator, the participation of the IAEA in processing low- and medium-level radioactive wastes, etc. (E.S.)

  18. Separation procedure for the determination of Ag, Cd, Hg and Zn in biological material by radiochemical neutron activation analysis

    Energy Technology Data Exchange (ETDEWEB)

    Haas, H F; Krivan, V

    1986-05-01

    A simple separation procedure for the determination of Ag, Au, Cd, Hg and Zn in biological material by radiochemical neutron activation analysis was developed. It enables the separation of the indicator radionuclides sup(110m)Ag, /sup 198/Au, /sup 115/Cd, /sup 203/Hg and /sup 65/Zn in a group with yields >99% and is well suited for the separation of /sup 203/Hg from /sup 75/Se and /sup 65/Zn from /sup 46/Sc. The separation of these radionuclides is often necessary because of the occurrence of instrumental interferences in the instrumental neutron activation analysis. Simultaneously, the limits of detection for Ag, Au and Cd can significantly be improved. The method is based on the decomposition of the sample in the mixture of HNO/sub 3//HCl/H/sub 2/O/sub 2/ and on the separation of Ag, Au, Cd, Hg and Zn on Dowex 1X8 from a sample solution being 1.5 M with HCl. The applicability of this method is demonstrated by the analysis of lichens and several kinds of fungi. For the experimental conditions used, the limits of detection are of the order of magnitude of 10 ng/g.

  19. The analysis of thallium in geological materials by radiochemical neutron activation and x-ray fluorescence spectrometry: a comparison

    Energy Technology Data Exchange (ETDEWEB)

    McGoldrick, P J; Robinson, P [Tasmania Univ., Sandy Bay, TAS (Australia)

    1994-12-31

    Carrier-based radiochemical neutron activation (RNAA) is a precise and accurate technique for the analysis of Tl in geological materials. For about a decade, until the mid-80s, a procedure modified from Keays et al. (1974) was used at the University of Melbourne to analyse for Tl in a wide variety of geological materials. Samples of powdered rock weighing several hundred milligrams each were irradiated in HIFAR for between 12 hours and 1 week, and subsequently fused with a sodium hydroxide - sodium peroxide mixture and several milligrams of inactive Tl carrier. Following acid digestion of the fusion mixture anion exchange resin was used to separate Tl from the major radioactive rock constituents. The Tl was then stripped from the resin and purified as thallium iodide and a yield measured gravimetrically. Activity from {sup 204}Tl (a {beta}-emitter with a 3 8 year half-life) was measured and Tl determined by reference to pure chemical standards irradiated and processed along with the unkowns. Detection limits for the longer irradiations were about one part per billion. Precision was monitored by repeat analyses of `internal standard` rocks and was estimated to be about five to ten percent (one standard deviation). On the other hand, X-ray fluorescence spectrometry (XRF) was seen as an excellent cost-effective alternative for thallium analysis in geological samples, down to 1 ppm. 6 refs. 1 tab., 1 fig.

  20. The analysis of thallium in geological materials by radiochemical neutron activation and x-ray fluorescence spectrometry: a comparison

    Energy Technology Data Exchange (ETDEWEB)

    McGoldrick, P.J.; Robinson, P. [Tasmania Univ., Sandy Bay, TAS (Australia)

    1993-12-31

    Carrier-based radiochemical neutron activation (RNAA) is a precise and accurate technique for the analysis of Tl in geological materials. For about a decade, until the mid-80s, a procedure modified from Keays et al. (1974) was used at the University of Melbourne to analyse for Tl in a wide variety of geological materials. Samples of powdered rock weighing several hundred milligrams each were irradiated in HIFAR for between 12 hours and 1 week, and subsequently fused with a sodium hydroxide - sodium peroxide mixture and several milligrams of inactive Tl carrier. Following acid digestion of the fusion mixture anion exchange resin was used to separate Tl from the major radioactive rock constituents. The Tl was then stripped from the resin and purified as thallium iodide and a yield measured gravimetrically. Activity from {sup 204}Tl (a {beta}-emitter with a 3 8 year half-life) was measured and Tl determined by reference to pure chemical standards irradiated and processed along with the unkowns. Detection limits for the longer irradiations were about one part per billion. Precision was monitored by repeat analyses of `internal standard` rocks and was estimated to be about five to ten percent (one standard deviation). On the other hand, X-ray fluorescence spectrometry (XRF) was seen as an excellent cost-effective alternative for thallium analysis in geological samples, down to 1 ppm. 6 refs. 1 tab., 1 fig.

  1. Radiochemical Processing Laboratory (RPL)

    Data.gov (United States)

    Federal Laboratory Consortium — The Radiochemical Processing Laboratory (RPL)�is a scientific facility funded by DOE to create and implement innovative processes for environmental clean-up and...

  2. Chemical and Radiochemical Analysis of Consolidated Sludge Samples from the K East Basin

    International Nuclear Information System (INIS)

    Elmore, M.R.; Schmidt, A.J.; Silvers, K.L.; Thornton, B.M.

    2000-01-01

    This report describes results from analyses performed to characterize the consolidated sludge samples collected from the Hanford K East Basin in March and April 1999. The consolidated sludge samples were collected to provide additional material needed for the evaluation and design of systems that will be used to manage the K Basin sludge (i.e., disposition the sludge to T Plant for interim storage). The analytical results given in this report add to the knowledge on the composition of the K Basin sludge and provide specific information on this sludge necessary to plan and understand subsequent process testing. The following analyses were performed: weight percent (wt%) solids determination; uranium analysis by kinetic phosphorescence; plutonium isotope analysis by extraction chromatographic separation followed by alpha energy analysis (AEA); gross beta analysis; gamma energy analysis (GEA); and metals analysis by inductively coupled plasma atomic emission spectroscopy (ICP-AES)

  3. NMR-based approach to the analysis of radiopharmaceuticals: radiochemical purity, specific activity, and radioactive concentration values by proton and tritium NMR spectroscopy.

    Science.gov (United States)

    Schenk, David J; Dormer, Peter G; Hesk, David; Pollack, Scott R; Lavey, Carolee Flader

    2015-06-15

    Compounds containing tritium are widely used across the drug discovery and development landscape. These materials are widely utilized because they can be efficiently synthesized and produced at high specific activity. Results from internally calibrated (3)H and (1)H nuclear magnetic resonance (NMR) spectroscopy suggests that at least in some cases, this calibrated approach could supplement or potentially replace radio-high-performance liquid chromatography for radiochemical purity, dilution and scintillation counting for the measurement of radioactivity per volume, and liquid chromatography/mass spectrometry analysis for the determination of specific activity. In summary, the NMR-derived values agreed with those from the standard approaches to within 1% to 9% for solution count and specific activity. Additionally, the NMR-derived values for radiochemical purity deviated by less than 5%. A benefit of this method is that these values may be calculated at the same time that (3)H NMR analysis provides the location and distribution of tritium atoms within the molecule. Presented and discussed here is the application of this method, advantages and disadvantages of the approach, and a rationale for utilizing internally calibrated (1)H and (3)H NMR spectroscopy for specific activity, radioactive concentration, and radiochemical purity whenever acquiring (3)H NMR for tritium location. Copyright © 2015 John Wiley & Sons, Ltd.

  4. Determination of noble metals in geological materials by radiochemical neutron-activation analysis

    International Nuclear Information System (INIS)

    Ahmad, I.; Ahmad, S.; Morris, D.F.C.

    1977-01-01

    A method for the determination of platinum, palladium, gold and iridium in geological materials following activation with thermal neutrons is described. Radionuclides formed from the elements are separated by a scheme based largely on liquid-liquid extractions. The procedure has been applied to the analysis of US Geological Survey standard rocks and to studies of the distribution of the noble metals in lateritic nickel ores. (author)

  5. Nuclear and radiochemical techniques in chemical analysis. Progress report, August 1, 1978-July 31, 1979

    International Nuclear Information System (INIS)

    Finston, H.L.; Williams, E.T.

    1979-07-01

    Studies of homogeneous liquid-liquid extraction have been extended to include (1) a detailed determination of the phase diagram of the system propylene carbonate-water, (2) the extraction of a large variety of both monodentate and bidentate iron complexes, (3) the solvent extraction characteristics of analogues of propylene carbonate, (4) the behavior under pressure of the propylene carbonate water system, and (5) the extraction behavior of alkaline earth - TTA chelates. One consequence of these studies was the observation that the addition of ethanol to propylene carbonate-water or to isobutylene carbonate-water yields a single homogeneous phase. Subsequent evaporation of the ethanol restores the two immiscible phases. Past neutron activation analysis has been attempted for the heavy elements Pb, Bi, Tl at the Brookhaven HFBR (in- or near-core position) and at the Brookhaven CLIF facility. The latter appears more promising and we have initiated a collaborative program to use the CLIF facility. A milking system which can provide ca. 16 μCi of carrier-free 212 Pb was developed for use in an isotope dilution technique for lead. Collaboration with laboratories already determining trace lead by flameless Atomic Absorption or by concentration by electrodeposition into a hanging drop followed by Anodic stripping will be proposed. The Proton X-Ray Emission system has undergone marked improvement with the acquisition of a new high resolution Si(Li) detector and a new multi-channel analyzer system. Various techniques have been explored to dissolve and prepare samples for PIXE analysis and also for verification by Atomic Absorption analysis

  6. Nuclear and radiochemical techniques in chemical analysis. Progress report, August 1, 1978-July 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Finston, H. L.; Williams, E. T.

    1979-07-01

    Studies of homogeneous liquid-liquid extraction have been extended to include (1) a detailed determination of the phase diagram of the system propylene carbonate-water, (2) the extraction of a large variety of both monodentate and bidentate iron complexes, (3) the solvent extraction characteristics of analogues of propylene carbonate, (4) the behavior under pressure of the propylene carbonate water system, and (5) the extraction behavior of alkaline earth - TTA chelates. One consequence of these studies was the observation that the addition of ethanol to propylene carbonate-water or to isobutylene carbonate-water yields a single homogeneous phase. Subsequent evaporation of the ethanol restores the two immiscible phases. Past neutron activation analysis has been attempted for the heavy elements Pb, Bi, Tl at the Brookhaven HFBR (in- or near-core position) and at the Brookhaven CLIF facility. The latter appears more promising and we have initiated a collaborative program to use the CLIF facility. A milking system which can provide ca. 16 ..mu..Ci of carrier-free /sup 212/Pb was developed for use in an isotope dilution technique for lead. Collaboration with laboratories already determining trace lead by flameless Atomic Absorption or by concentration by electrodeposition into a hanging drop followed by Anodic stripping will be proposed. The Proton X-Ray Emission system has undergone marked improvement with the acquisition of a new high resolution Si(Li) detector and a new multi-channel analyzer system. Various techniques have been explored to dissolve and prepare samples for PIXE analysis and also for verification by Atomic Absorption analysis.

  7. Nuclear and radiochemical techniques in chemical analysis. Progress report, 1 June 1974--31 May 1975

    International Nuclear Information System (INIS)

    Finston, H.L.; Williams, E.T.

    1975-01-01

    Progress on the project to determine the neutron-absorption cross section of 22 Na is described. Upper limits for the thermal-neutron cross sections of 88 Y and 139 Ce have been set at 100 barns. The experiment to search for a change in the ratio of electron capture to positron emission due to difference in chemical environment is underway. The mechanical aspects of the system for analysis by proton-induced x-ray emission are described. Recent results on solvent extraction of mercury by pure solvents and propylene carbonate are described. Recent measurements in a study of an acid-base hypothesis are described. (U.S.)

  8. A simple and rapid method for the determination of iodine in rice samples by radiochemical neutron activation analysis

    International Nuclear Information System (INIS)

    Takagi, Hiroyuki; Kimura, Toshimasa; Iwashima, Kiyoshi; Yamagata, Noboru.

    1983-01-01

    A simple and rapid method has been developed for the determination of iodine in rice samples by radiochemical neutron activation analysis. Irradiated rice powder was decomposed together with an iodide carrier solution containing I-131 on heating in a sodium hypochlorite solution. After decomposition, the solution was acidified with hydrochloric acid, and the insoluble residue was filtered off. To the filtrate sodium sulfite solution and palladium chloride solution were added, and the precipitate of palladium iodide was separated with a glass fiber filter paper. Iodine contents of rice were calculated from the peak areas under the 443 keV γ-ray of I-128 in the precipitate and comparative stand ard. Corrections for the chemical recovery were applied to them by means of the areas under the 365 keV γ-ray of I-131. This method was applied to the certified refe rece materials, IAEA wheat flour RM-V-5 and NBS orchard leaves SRM 1571. The results were in good agreement with the recommended values. Iodine contents of rice samples of two different origins in Japan were found to be of the order of 10 0 ng g -1 (dry weight base). The recovery of iodine in this procedure was about 80%. Decontamination factors for Mn, Cl, Na, and Br in the final fraction were 7 x 10 3 , 2 x 10 4 , 3 x 10 4 , and 2 x 10 2 , respectively. The time required for the chemical procedure was about 15 min, and the limit of determination was 0.7 ng of iodine in a sample of 1 g. (author)

  9. An analysis of combined standard uncertainty for radiochemical measurements of environmental samples

    International Nuclear Information System (INIS)

    Berne, A.

    1996-01-01

    It is anticipated that future data acquisitions intended for use in radiological risk assessments will require the incorporation of uncertainty analysis. Often, only one aliquot of the sample is taken and a single determination is made. Under these circumstances, the total uncertainty is calculated using the open-quotes propagation of errorsclose quotes approach. However, there is no agreement in the radioanalytical community as to the exact equations to use. The Quality Assurance/Metrology Division of the Environmental Measurements Laboratory has developed a systematic process to compute uncertainties in constituent components of the analytical procedure, as well as the combined standard uncertainty (CSU). The equations for computation are presented here, with examples of their use. They have also been incorporated into a code for use in the spreadsheet application, QuattroPro trademark. Using the spreadsheet with appropriate inputs permits an analysis of the variations in the CSU as a function of several different variables. The relative importance of the open-quotes counting uncertaintyclose quotes can also be ascertained

  10. Determination of total mercury and methylmercury in human head hair by radiochemical methods of analysis

    International Nuclear Information System (INIS)

    Vasconcellos, M.B.A.; Saiki, M.; Paletti, G.; Baruzzi, R.G.; Rodrigues, D.A.; Cuten, J.

    1995-01-01

    Total mercury has been determined by instrumental neutron activation analysis in the hair of several Indian tribes living in the Xingu Park, located in the Amazonic region of Brazil. Methylmercury and total mercury have been determined in selected samples using cold vapour atomic absorption spectroscopy, at the Nuclear Chemistry Department, Jozef Stefan Institute, Ljubliana, Slovenia. Mercury levels were found to be much higher in the Indian hair samples as compared to the samples from the control population. The arithmetic and geometric means for total mercury in the Indian hair samples ranged from 10 to 20 ppm, compared to values of about 1 ppm for the means of the control group. The results obtained for methylmercury have shown that the majority of the mercury is present in the hair of the Indians as the organic form. The Indian study populations living in the Xingu Park can thus be considered as being at risk with regards to contamination by mercury. With the aim of applying neutron activation analysis for the determination of methylmercury in hair, experiments were done at the IEA-R1 nuclear research reactor irradiating cysteine- and also thioacetamide- impregnated filter papers, on which a methylmercury solution was pipetted. The results obtained have shown that all the mercury was lost from the cysteine-impregnated paper and about 90 % of the mercury remained on the paper impregnated with thioacetamide. (author)

  11. Nuclear and radiochemical techniques in chemical analysis. Progress report, June 1, 1975--July 31, 1976

    International Nuclear Information System (INIS)

    Finston, H.L.; Williams, E.T.

    1976-01-01

    There has been significant progress on the project to measure the neutron-capture cross sections of reactor produced radionuclides, in particular, centering on the problems with nuclides such as 22 Na which may have a resonance for thermal-neutron capture. The thermal capture cross section of less than 40 b has been verified for 54 Mn, and cadmium ratios have been determined for 184 Re in the V-11 and V-14 positions in the HFBR. Lutetium has been used as a neutron temperature monitor for the Brookhaven reactors. Preliminary results on the project to determine the effect of chemical state on the branching ratio in 58 Co are reported. Procedures for aerosol collection and analysis by proton-induced x-ray emission (PIXE) are reported. A program to analyze aerosols for polycyclic aromatic hydrocarbons has been initiated. Progress is reported on the experimental verification of the proposed acid-base hypothesis

  12. Chemical, mass spectrometric, spectrochemical, nuclear, and radiochemical analysis of nuclear-grade plutonium nitrate solutions

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    These analytical procedures are designed to show whether a given material meets the purchaser's specifications as to plutonium content, effective fissile content, and impurity content. The following procedures are described in detail: plutonium by controlled-potential coulometry; plutonium by amperometric titration with iron(II); free acid by titration in an oxalate solution; free acid by iodate precipitation-potentiometric titration method; uranium by Arsenazo I spectrophotometric method; thorium by thorin spectrophotometric method; iron by 1,10-phenanthroline spectrophotometric method; chloride by thiocyanate spectrophotometric method; fluoride by distillation-spectrophotometric method; sulfate by barium sulfate turbidimetric method; isotopic composition by mass spectrometry; americium-241 by extraction and gamma counting; americium-241 by gamma counting; gamma-emitting fission products, uranium, and thorium by gamma-ray spectroscopy; rare earths by copper spark spectrochemical method; tungsten, niobium (columbium), and tantalum by spectrochemical method; simple preparation by spectrographic analysis for general impurities

  13. Selenium determination in cereal plants and cultivation soils by radiochemical neutron activation analysis

    International Nuclear Information System (INIS)

    Galinha, C.; Freitas, M.C.; Anawar, H.M.; Pacheco, A.M.G.; Kamenik, J.; Kucera, J.; Coutinho, J.; Macas, B.; Almeida, A.S.

    2012-01-01

    Selenium (Se) is an essential micronutrient for human health but it is deficient in at least 1 billion people around the globe. Cereals are by far the most significant agricultural crops, not only on a gross tonnage basis, but also by what they represent in terms of energy supply and dietary intake for human nutrition worldwide. Portugal is no exception to such pattern. The Portuguese situation is difficult to assess though, due to scarce information and lack of consistent studies on the subject. In these terms, the Se status of major cereals and their cultivation soils are dealt with herein. Two species of wheat-bread and durum wheat-were sown at the end of November 2009, and then sampled in different growth stages. Rye was collected during harvest season, and cultivation soils were analyzed as well. Se results were within the range of: 100-225 ng g -1 for soils; 3-55 ng g -1 for durum wheat; 6-80 ng g -1 for bread wheat; and 4-30 ng g -1 for rye. Accuracy of the RNAA procedure was proved by analysis of reference materials NIST-SRM 1515 and NIS-SRM 8433. (author)

  14. Chemical, mass spectrometric, spectrochemical, nuclear, and radiochemical analysis of nuclear-grade uranyl nitrate solutions

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    The standard covers analytical procedures to determine compliance of nuclear-grade uranyl nitrate solution to specifications. The following methods are described in detail: uranium by ferrous sulfate reduction-potassium dichromate titrimetry and by ignition gravimetry; specific gravity by pycnometry; free acid by oxalate complexation; thorium by the Arsenazo(III) (photometric) method; chromium by the diphenylcarbazide (photometric) method; molybdenum by the thiocyanate (photometric) method; halogens separation by steam distillation; fluorine by specific ion electrode; halogen distillate analysis: chloride, bromide and iodide by amperometric microtitrimetry; bromine by the fluorescein (photometric) method; sulfate sulfur by (photometric) turbidimetry; phosphorus by the molybdenum blue (photometric) method; silicon by the molybdenum blue (photometric) method; carbon by persulfate oxidation-acid titrimetry; nonvolatile impurities by spectrography; volatile impurities by rotating-disk spark spectrography; boron by emission spectrography; impurity elements by spark source mass spectrography; isotopic composition by multiple filament surface-ionization mass spectrometry; uranium-232 by alpha spectrometry; total alpha activity by direct alpha counting; fission product activity by beta and gamma counting; entrained organic matter by infrared spectrophotometry

  15. Standard methods for chemical, mass spectrometric, spectrochemical, nuclear, and radiochemical analysis of uranium hexafluoride

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    All methods described for subsampling and analysis of UF 6 are in routine use at United States Atomic Energy Commission installations. A gravimetric method is included for U and titrimetric methods, for Cl 2 and U. Mass spectrometric methods are given for both double and single standard procedures for U-isotopic content and for semiquantitative determination of hydrocarbons, chlorocarbons, and partially substituted halohydrocarbons. Spectroscopic methods are described for 232 U, fission products, Pu, and Np. In some instances an ion exchange- or extraction-separation is specified prior to the spectroscopic determination. Mass spectroscopic procedures for 31 trace elements are included, as are spectrophotometric methods for Br 2 , Si, P, Ti, V, W, Th, and Mo. Following a preliminary separation for some elements, emission spectroscopic procedures are described for B, Si, Ru, Hf, Mo, Nb, Ta, Ti, W, Zr, V, Th, rare earths, and other elements. Procedures for the determination of Sb, Ru, Al, Cd, Co, Ca, Cr, Fe, Pb, Mg, Mn, Ni, K, Na, and Zn by atomic absorption methods are included. The preparation of high-purity U 3 O 8 by the hydrolysis of UF 6 to UO 2 F 2 which upon drying and pyrohydrolysis yields U 3 O 8 is described

  16. Radiochemical analysis of a wide range of 131I activities in water and milk using well-type germanium detector

    International Nuclear Information System (INIS)

    Xin Li; Bradt, C.J.; Umme-Farzana Syed; Abdul Bari; Torres, M.A.; Kimi Nishikawa; Khan, A.J.; Menia, T.A.; Semkow, T.M.; University at Albany, State University of New York, Rensselaer, NY

    2017-01-01

    We report a study of a fast radiochemical method to determine the activity of 131 I via the radiochemical recovery obtained with a 129 I tracer. Previous methods were valid for low levels of 131 I activities. In the new method, we developed a correction using the 29.7-keV X-ray peak from Xe, taking into consideration that this peak originates from both and 131 I decay. This enables quantitation of high levels of 131 I activity. Furthermore, for a very high 131 I activity, one can use the 39.6-keV gamma peak which is unique to 129 I. Combining both approaches enables quantitation of 131 I activities up to 200 times that of the 129 I recovery tracer. (author)

  17. Use of composite materials for the determination of Cu, As, Mo, Cd and Sb in biological materials by radiochemical neutron activation analysis

    International Nuclear Information System (INIS)

    Lucanikova, M.; John, J.; Kucera, J.; Sebesta, F.

    2006-01-01

    New composite materials were developed and tested for determination of Cu, As, Mo, Cd, and Sb in biological materials by radiochemical neutron activation analysis (RNAA). The materials were prepared by incorporation of solid zinc diethyldithiocarbamate or liquid bis(2,4,4-trimethylpentyl)dithiophosphinic acid (CYANEX 301) into a polyacrylonitrile (PAN) binding matrix. The accuracy of the RNAA procedures was proved by analysis of NIST SRM-1515 Apple Leaves, NIST SRM-1577b Bovine Liver, and NIST SRM-1549 Non Fat Milk Powder. (author)

  18. Dietary intake of Arsenic, Iodine and Selenium by adolescents in three Orphanages in Southern Ghana using Radiochemical Neutron activation analysis

    International Nuclear Information System (INIS)

    Adotey, K. D.

    2011-07-01

    Adolescents require optimum dietary supply of the essential trace minerals iodine (I) and selenium (Se). Their dietary exposure to arsenic (As), due to its natural presence in the diet, should be at levels that provides ample safety. Due to the late recognition of the critical nature of adolescent nutrition, there is scarce and almost non-existence of data on the adolescents dietary intake of As, I and Se; making it difficult for public health nutritionists to assess the adequacy of the dietary intake. The absence of data has also adversely affected the formulation of policies on adolescent nutrition and its integration into existing nutrition and health care programmes in Ghana. The dietary intake of As, I and Se for adolescents (12-15years) in three residential care orphanages, (Osu, Tutu- Akwapim, and Teshie), in Southern Ghana, have been evaluated by sampling their 24- hour total duplicate diets (including water) for 7-consecutive days using the duplicate diet sampling technique. The mass fraction of As, I and Se in the pooled blended lyophilized homogenates of duplicate diets was determined by radiochemical neutron activation analysis (RNAA). The validity of the RNAA methods for As, I and Se determinations were respectively checked by analyses of NIST SRM 1548a (Typical Diet). The chemical yields (recovery of the respective radiochemical separation of As, I and Se were 90- 92%, 83-88%, and 78-85%. The mass fraction of arsenic in the lyophilized diets for Osu, Tutu-Akwapim and Teshie were 134 ± 104 [46-240], 146 ± 87 [39-355], and 189 ± 123 [69-348] ng As g -1 lyophilized matter. The dietary exposures to As were 47 ± 23 [17-84], 58 ± 44 [16-125] and 67 ± 28 [24-117] μg As day -1 for Osu, Tutu-Akwapim and Teshie orphanages respectively. The mass fraction of I in the lyophilized diets were 287 ± 95 [206-397], 286 ± 109 [201-386], and 961 ± 142 [588-1766] ng I g -1 lyophilized matter, for Osu, Tutu-Akwapim and Teshie respectively. The dietary intake of I

  19. Selenium in bread and durum wheats grown under a soil-supplementation regime in actual field conditions, determined by cyclic and radiochemical neutron activation analysis

    International Nuclear Information System (INIS)

    Catarina Galinha; Maria do Carmo Freitas; Marek Fikrle; Jan Kucera; Wolterbeek, H.T.

    2015-01-01

    This work focuses on the ability of bread and durum wheat to accumulate selenium (Se) via a soil-addition procedure at sowing time. Total Se in mature-grain samples was determined by neutron activation analysis (cyclic and radiochemical). Results show that Se-supplementation at the top rate (100 g Se ha -1 ) can increase Se contents up to 2, 16, 18 and 20 times for Jordao, Roxo, Marialva and Celta cultivars, respectively, when compared to their unsupplemented crops. These findings do not preclude the need for weighing up an eventual trade-off between agrochemical costs, field logistics and Se recovery for alternative Se-biofortification methods. (author)

  20. Safety assessment for TA-48 radiochemical operations

    International Nuclear Information System (INIS)

    1994-08-01

    The purpose of this report is to document an assessment performed to evaluate the safety of the radiochemical operations conducted at the Los Alamos National Laboratory operations area designated as TA-48. This Safety Assessment for the TA-48 radiochemical operations was prepared to fulfill the requirements of US Department of Energy (DOE) Order 5481.1B, ''Safety Analysis and Review System.'' The area designated as TA-48 is operated by the Chemical Science and Technology (CST) Division and is involved with radiochemical operations associated with nuclear weapons testing, evaluation of samples collected from a variety of environmental sources, and nuclear medicine activities. This report documents a systematic evaluation of the hazards associated with the radiochemical operations that are conducted at TA-48. The accident analyses are limited to evaluation of the expected consequences associated with a few bounding accident scenarios that are selected as part of the hazard analysis. Section 2 of this report presents an executive summary and conclusions, Section 3 presents pertinent information concerning the TA-48 site and surrounding area, Section 4 presents a description of the TA-48 radiochemical operations, and Section 5 presents a description of the individual facilities. Section 6 of the report presents an evaluation of the hazards that are associated with the TA-48 operations and Section 7 presents a detailed analysis of selected accident scenarios

  1. Development of radiochemical method of analysis of binding of tritium labeled drotaverine hydrochloride with human blood serum albumin

    International Nuclear Information System (INIS)

    Kim, A.A.; Djuraeva, G.T.; Shukurov, B.V.; Mavlyanov, I.R.

    2004-01-01

    Full text: The albumin, being a basic functional linkage of numerous endogenous and exogenous substances is the most important protein of blood plasma. At the diseases connected to liver disfunction, collected in blood metabolite reduce connecting ability of albumino. The aim of the present research was a development of radiochemical method of determination of ability of albumin to bind the tritium labeled preparation drotaverine hydrochloride (no - spa). We had developed a micromethod of definition of connecting ability of albumin, allowing to analyse 20 mkl of blood serum. The method consists in incubation of tritium labeled drotaverine hydrochloride with blood serum in vitro, the following fractionation of serum proteins by gel - filtration on a microcolumn with Sephadex G-25, and direct measurement of the radioactivity connected to fraction of proteins of blood serum. The method has been tested on a series of blood serum of control group of healthy people and on a series of blood serum of patients with hepatitis B. We received quantitative characteristics of binding of drotaverine hydrochloride with albumin of patients with hepatitis B. It was preliminary established that binding ability of serum albumin of children with various forms of acute virus hepatitis tends to decrease in comparison with group of the control. Advantage of the developed radiochemical method is high precision and the high sensitivity of detection of infringement of binding ability of albumin. Application of tritium labeled drotaverine hydrochloride allows to measure directly levels of binding of a preparation with albumin

  2. Devising of the method for the determination of small and very small amounts of cadmium in biological materials by radiochemical version of neutron activation analysis

    International Nuclear Information System (INIS)

    Dybczynski, R.; Samczynski, Z.

    1996-01-01

    The newly modified version of the method for the determination of cadmium in biological materials by radiochemical NAA based on selective post irradiation separation of Cd using ion exchange rasin Retardion 11A8 is presented. The conditions necessary for the selective retaining of Cd on the column exploiting both anionic and cationic ion exchange function of the resin have been discussed. Depending on the composition of the external solution, cadmium existing in the form of either anionic chloride complexes or cationic amine species is taken up by quaternary ammonium or carboxylate functional groups, respectively while accompanying elements are eluted. The elaborated method was further verified by determine Cd content in several certified biological reference materials using neutron activation analysis. The ion exchange separation procedure assures very high radiochemical purity of the cadmium fraction. Decontamination factors obtained for Mo, Sb, Na, Zn, Co, Sc amounted to 10 3 - 10 6 . Detection limit for Cd was 0.5 μg kg -1 . Analytical results show good agreement with the certified values. (author). 10 refs, 7 figs, 1 tab

  3. Development of a radiochemical neutron activation analysis procedure for determination of rhenium in biological and environmental samples at ultratrace level

    International Nuclear Information System (INIS)

    Kucera, J.; Lucanikova, M.; Czech Technical Univ., Prague

    2006-01-01

    Radiochemical neutron activation procedures using liquid-liquid extraction with tetraphenylarsonium chloride in chloroform from 1M HCl and solid extraction with ALIQUAT 336 incorporated in a polyacrylonitrile binding matrix from 0.1M HCl were developed for accurate determination of rhenium in biological and environmental samples at the sub-ng x g -1 level. Concentrations of Re in the range of 0.1 to 2.4 ng x g -1 were determined in several botanical reference materials (RM), while in a RM of road dust a value of ∼ 10 ng x g -1 was found. Significantly elevated values of Re, up to 90 ng x g -1 were found in seaweed (brown algae). Results for Re in the brown algae Fucus vesiculosus in which elevated 99 Tc values had previously been determined suggested possible competition between Re and Tc in the accumulation process. (author)

  4. Radiochemicals in biomedical research

    International Nuclear Information System (INIS)

    Evans, E.A.; Oldham, K.G.

    1988-01-01

    This volume describes the role of radiochemicals in biomedical research, as tracers in the development of new drugs, their interaction and function with receptor proteins, with the kinetics of binding of hormone - receptor interactions, and their use in cancer research and clinical oncology. The book also aims to identify future trends in this research, the main objective of which is to provide information leading to improvements in the quality of life, and to give readers a basic understanding of the development of new drugs, how they function in relation to receptor proteins and lead to a better understanding of the diagnosis and treatment of cancers. (author)

  5. Radiochemical synthesis of etomoxir

    Energy Technology Data Exchange (ETDEWEB)

    Abbas, Hafiz G. [Institute of Nuclear Medicine and Oncology (INMOL), New Campus Road, Lahore (Pakistan); Yunus, M. [University of the Punjab, New Campus Road, Lahore (Pakistan); Feinendegen, Ludwig E., E-mail: feinendegen@gmx.ne [Department of Nuclear Medicine, Heinrich-Heine University Duesseldorf, Wannental 45, 88131 Lindau (Germany)

    2011-02-15

    Sodium 2-{l_brace}6-(4-chlorophenoxy)hexyl{r_brace}oxirane-2-carboxylate (Etomoxir) inhibits transport of fatty acids via the carnitine shuttle into mitochondria of muscle cells and prevents long chain fatty acids from providing energy through {beta}-oxidation especially for muscle contraction. The objective of this synthesis is to develop a method for radioiodination of Etomoxir in order to explore its potential in diagnostic metabolic studies and molecular imaging. Thus, a method is described for the radiochemical synthesis and purification of ethyl 2-{l_brace}6-(4-[{sup 131}I]iodophenoxy)hexyl{r_brace}oxirane-2-carboxylate (3) and 2-{l_brace}6-(4-[{sup 131}I]iodo-phenoxy)hexyl{r_brace}oxirane-2-carboxylic acid (4). For the synthesis of these new agents, ethyl 2-{l_brace}6-(4-bromophenoxy)hexyl{r_brace}oxirane-2-carboxylate (1) and 2-{l_brace}6-(4-bromophenoxy)hexyl{r_brace}oxirane-2-carboxylic acid (2) were refluxed with [{sup 131}I]NaI in the presence of anhydrous acetone at a temperature of 80 {sup o}C and 90 {sup o}C for a period of 3-4 hours, respectively. The method of radiolabeling, based on the nucleophilic exchange reaction, resulted in a radiochemical yield of 43% and 67% for compounds 3 and 4, respectively. This paper reports on the labeling of etomoxir with radioiodine as {sup 124}I labeled etomoxir may be of great importance in molecular imaging.

  6. Evaluation of radiochemical data usability

    International Nuclear Information System (INIS)

    Paar, J.G.; Porterfield, D.R.

    1997-04-01

    This procedure provides a framework for implementation of radiochemical data verification and validation for environmental remediation activities. It has been developed through participation of many individuals currently involved in analytical radiochemistry, radiochemical validation, and validation program development throughout the DOE complex. It should be regarded as a guidance to use in developing an implementable radiochemical validation strategy. This procedure provides specifications for developing and implementing a radiochemical validation methodology flexible enough to allow evaluation of data useability for project-specific Data Quality Objectives (DQO). Data produced by analytical methods for which this procedure provides limited guidance are classified as open-quotes non-routineclose quotes radionuclides and methods, and analyses by these methods may necessitate adoption of modified criteria from this procedure

  7. The use of 99Mo/99mTc generators in the analysis of low levels of 99Tc in environmental samples by radiochemical methods

    International Nuclear Information System (INIS)

    Dowdall, M.; Selnaes, Oe.G.; Lind, B.; Gwynn, J.P.

    2010-01-01

    The analysis of low levels of 99 Tc in environmental samples presents special challenges, particularly with respect to the selection of an appropriate and practicable chemical yield tracer. Of all the tracers available, 99m Tc eluted from 99 Mo/ 99m Tc generators appears to be the most practicable in terms of availability, ease of use and cost. These factors have led to an increase in the use of such generators for the provision of 99m Tc as yield tracer for 99 Tc. For the analysis of low levels ( 3 or kg) of 99 Tc in environmental samples, consideration must be given to the radiochemical purity of the tracer solution with respect to contamination with both 99 Tc and other radionuclides. Due to the variable nature of the extent of the interference from tracer solution to tracer solution, it is unwise to try and establish a correction factor for any single generator. The only practical solution to the problem therefore is to run a 'blank' sample with each batch of samples drawn from a single tracer solution. (LN)

  8. Collected radiochemical and geochemical procedures

    Energy Technology Data Exchange (ETDEWEB)

    Kleinberg, J [comp.

    1990-05-01

    This revision of LA-1721, 4th Ed., Collected Radiochemical Procedures, reflects the activities of two groups in the Isotope and Nuclear Chemistry Division of the Los Alamos National Laboratory: INC-11, Nuclear and radiochemistry; and INC-7, Isotope Geochemistry. The procedures fall into five categories: I. Separation of Radionuclides from Uranium, Fission-Product Solutions, and Nuclear Debris; II. Separation of Products from Irradiated Targets; III. Preparation of Samples for Mass Spectrometric Analysis; IV. Dissolution Procedures; and V. Geochemical Procedures. With one exception, the first category of procedures is ordered by the positions of the elements in the Periodic Table, with separate parts on the Representative Elements (the A groups); the d-Transition Elements (the B groups and the Transition Triads); and the Lanthanides (Rare Earths) and Actinides (the 4f- and 5f-Transition Elements). The members of Group IIIB-- scandium, yttrium, and lanthanum--are included with the lanthanides, elements they resemble closely in chemistry and with which they occur in nature. The procedures dealing with the isolation of products from irradiated targets are arranged by target element.

  9. Separation of plutonium on the anion exchanger BIO-RAD 1-X2 and its application to radiochemical analysis

    Energy Technology Data Exchange (ETDEWEB)

    Bajo, S.; Gann, C.; Eikenberg, J.; Wyer, L.; Beer, H.; Ruethi, M.; Jaeggi, M.; Zumsteg, I

    2007-12-15

    The element Pu (Z = 94) is a member of the actinide series of the elements (Z = 89 -103). The actinides have similar chemical properties and are also similar to the lanthanides (Z = 57 -71). Sixteen isotopes of Pu have been synthesized, all of which are radioactive. The Pu present in the environment originates from the atmospheric nuclear tests from 1950 to 1963, which produced the so-called 'global fallout'. As a result, 6.5 {center_dot} 10{sup 15} Bq {sup 239}Pu (2.8 tons), 4.4 {center_dot} 10{sup 15} Bq {sup 240}Pu (0.52 tons), and 3.7 {center_dot} 10{sup 4} Bq {sup 241}Pu (0.04 tons) were dispersed over the world. A contribution also to the global fallout was the ignition of the satellite SWAP 9A in the atmosphere in 1964, equipped with a battery powered by 6.3 {center_dot} 10{sup 14} Bq (1 kg) of {sup 238}Pu. In addition to these sources, nuclear reactors, reprocessing plants and radioactive waste facilities may contribute with their emissions to increase locally the Pu concentration in their environment. In the PSI laboratory, we are confronted with the determination of traces of {sup 238}Pu, {sup 239}Pu and {sup 240}Pu in environmental and biological materials. Because of the low quantity of Pu in the analyzed samples, which is usually below 100 mBq, it is mandatory to separate the Pu from all other accompanying elements. The separated Pu is then measured by alpha spectrometry. In this work, the anion exchanger BIO-RAD AG 1 is extensively used for the separation of Pu from different matrices. This exchanger is superior when only Pu is determined in the sample. In addition, it is also very suitable when other actinides, such as Am and Cm, are also determined. No preconcentration step is necessary for the Pu separation. The resins introduced by the company Eichrom Industries in the 90's, which allow the separation of the actinides from the major environmental elements and from each other, requires relatively small volumes of sample solution

  10. Separation of plutonium on the anion exchanger BIO-RAD 1-X2 and its application to radiochemical analysis

    International Nuclear Information System (INIS)

    Bajo, S.; Gann, C.; Eikenberg, J.; Wyer, L.; Beer, H.; Ruethi, M.; Jaeggi, M.; Zumsteg, I.

    2007-12-01

    The element Pu (Z = 94) is a member of the actinide series of the elements (Z = 89 -103). The actinides have similar chemical properties and are also similar to the lanthanides (Z = 57 -71). Sixteen isotopes of Pu have been synthesized, all of which are radioactive. The Pu present in the environment originates from the atmospheric nuclear tests from 1950 to 1963, which produced the so-called 'global fallout'. As a result, 6.5 · 10 15 Bq 239 Pu (2.8 tons), 4.4 · 10 15 Bq 240 Pu (0.52 tons), and 3.7 · 10 4 Bq 241 Pu (0.04 tons) were dispersed over the world. A contribution also to the global fallout was the ignition of the satellite SWAP 9A in the atmosphere in 1964, equipped with a battery powered by 6.3 · 10 14 Bq (1 kg) of 238 Pu. In addition to these sources, nuclear reactors, reprocessing plants and radioactive waste facilities may contribute with their emissions to increase locally the Pu concentration in their environment. In the PSI laboratory, we are confronted with the determination of traces of 238 Pu, 239 Pu and 240 Pu in environmental and biological materials. Because of the low quantity of Pu in the analyzed samples, which is usually below 100 mBq, it is mandatory to separate the Pu from all other accompanying elements. The separated Pu is then measured by alpha spectrometry. In this work, the anion exchanger BIO-RAD AG 1 is extensively used for the separation of Pu from different matrices. This exchanger is superior when only Pu is determined in the sample. In addition, it is also very suitable when other actinides, such as Am and Cm, are also determined. No preconcentration step is necessary for the Pu separation. The resins introduced by the company Eichrom Industries in the 90's, which allow the separation of the actinides from the major environmental elements and from each other, requires relatively small volumes of sample solution. This report describes the extensive utilization of the classical anion exchanger BIO-RAD 1-X2 in 8 molar nitric

  11. Radiochemical analysis of the first plateout probe from the Fort St. Vrain high-temperature gas-cooled reactor

    International Nuclear Information System (INIS)

    Burnette, R.D.

    1982-06-01

    This report presents the analysis of radioactive elements on the first plateout probe from the Fort St. Vrain high-temperature gas-cooled reactor. The plateout probe is a device which samples the primary coolant for condensible fission products. Circuit inventories of individual radionuclides are estimated from the probe analysis. The analysis shows that the radioactive contamination in the primary circuit is remarkable low, with activation product concentrations much greater than that of fission products. The analysis demonstrates that the concentrations of the key fission products I-131 and Sr-90 are far below the limits allowed by the technical specification

  12. Rapid Radiochemical Methods for Asphalt Paving Material ...

    Science.gov (United States)

    Technical Brief Validated rapid radiochemical methods for alpha and beta emitters in solid matrices that are commonly encountered in urban environments were previously unavailable for public use by responding laboratories. A lack of tested rapid methods would delay the quick determination of contamination levels and the assessment of acceptable site-specific exposure levels. Of special concern are matrices with rough and porous surfaces, which allow the movement of radioactive material deep into the building material making it difficult to detect. This research focuses on methods that address preparation, radiochemical separation, and analysis of asphalt paving materials and asphalt roofing shingles. These matrices, common to outdoor environments, challenge the capability and capacity of very experienced radiochemistry laboratories. Generally, routine sample preparation and dissolution techniques produce liquid samples (representative of the original sample material) that can be processed using available radiochemical methods. The asphalt materials are especially difficult because they do not readily lend themselves to these routine sample preparation and dissolution techniques. The HSRP and ORIA coordinate radiological reference laboratory priorities and activities in conjunction with HSRP’s Partner Process. As part of the collaboration, the HSRP worked with ORIA to publish rapid radioanalytical methods for selected radionuclides in building material matrice

  13. Fifty years of radiochemical tracers

    International Nuclear Information System (INIS)

    Evans, E.A.

    1992-01-01

    During the past 50 years radiochemical tracers, usually in the form of isotopically labelled organic compounds, have been essential tools to further advance our knowledge at the frontiers of a great variety of scientific developments in the life sciences. This plenary lecture reviews necessarily selected highlights in the synthesis and applications of such radiochemical tracers. Included are examples where important advances, made possible by using radiochemicals, have contributed to improving the quality of life on this planet. The principal radioisotopes involved, 14 C, 3 H, 35 S, 32 P, 125 I, are all relatively safe to handle and are commercially available at maximum theoretical specific activity (carrier free). The compounds labeled with these radioisotopes are used in many fields of research which include biosynthesis and biotechnology studies, cell biology, drug metabolism, clinical research and environmental applications, and are briefly reviewed. (author). 55 refs

  14. Certification of total arsenic in blood and urine standard reference materials by radiochemical neutron activation analysis and inductively coupled plasma-mass spectrometry

    International Nuclear Information System (INIS)

    Paul, R.L.; Clay Davis, W.; Lee Yu; Murphy, K.E.; Bryan, C.E.; Vetter, T.W.; Guthrie, W.F.; Leber, D.D.; Gulchekhra Shakirova; Graylin Mitchell

    2014-01-01

    Radiochemical neutron activation analysis (RNAA) was used to measure arsenic at four levels in standard reference material (SRM) 955c Toxic Elements in Caprine Blood and at two levels in SRM 2668 Toxic Elements in Frozen Human Urine for the purpose of providing mass concentration values for certification. Samples were freeze-dried prior to analysis followed by neutron irradiation for 3 h at a fluence rate of 1 × 10 14 cm -2 s -1 . After sample dissolution in perchloric and nitric acids, arsenic was separated from the matrix either by retention on hydrated manganese dioxide (urine) or by extraction into zinc diethyldithiocarbamate in chloroform (blood). 76 As was quantified by gamma-ray spectroscopy. Differences in chemical yield and counting geometry between samples and standards were monitored by measuring the count rate of a 77 As tracer added before sample dissolution. RNAA results were combined with inductively coupled plasma-mass spectrometry values from National Institute of Standards and Technology and collaborating laboratories to provide certified values of 10.81 ± 0.54 and 213.1 ± 0.73 μg/L for SRM 2668 Levels I and II, and certified values of 21.66 ± 0.73, 52.7 ± 1.1, and 78.8 ± 4.9 μg/L for SRM 955c Levels II-IV, respectively. Because of discrepancies between values obtained by different methods for SRM 955c Level I, an information value of <5 μg/L was assigned for this material. (author)

  15. Radiochemical analysis of Bikini ashes fallen on board the No. 5 Fukuryu Maru on March 1, 1954

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, K

    1954-01-01

    Comprehensive analysis was done in order to find the proper method of medical treatment for the victim fishermen on board. Analysis was started on March 18, and ash was found to consist mostly of Ca(OH)/sub 2/, activity of which was 0.37 mc/g on April 23. Cations of the 3rd group (especially rare-earth metals) and 5th group were found to have strong activity by chemical separation. Fractions of each group, anions, Zr and Nb fraction, and U fraction were separated by an ion-exchange method.

  16. Use of species of the genus Tillandsia as bio monitors of the atmospheric contamination using radiochemical analysis

    International Nuclear Information System (INIS)

    Alonso, M. T.; Wilkinson, M. V.; Marques, R.

    2000-01-01

    The use of epiphytic plants as bio monitors of environmental pollution is studied in this paper. Species of the genus Tillandsia were selected to make studies, on the one hand, using the Neutron Activation Analysis in order to make multielemental analysis to detect possible pollutants. Optimum conditions of preparation and treatment of the samples were determined to verify the elemental uptake in plant tissues. On the other hand, some studies were carried out to investigate the uptake (translocation) of possible pollutants by using radiotracers. With this aim, a conditioned area (glove box) has been developed in order to reproduce the environment of these plants. This glove box was used for studies with radiotracers. The results of the experiments with Hg as radiotracer are presented in this paper. (author)

  17. Determination of radiochemical purity using gas chromatography

    International Nuclear Information System (INIS)

    1975-01-01

    The concepts of chromatography, gas chromatography, activity, radiochemical impurity are defined; the procedure of the application of gas chromatography for detecting radiochemical purity of substances is standardized. (E.F.)

  18. Automation of radiochemical analysis by flow injection techniques. Am-Pu separation using TRU-resinTM sorbent extraction column

    International Nuclear Information System (INIS)

    Egorov, O.; Washington Univ., Seattle, WA; Grate, J.W.; Ruzicka, J.

    1998-01-01

    A rapid automated flow injection analysis (FIA) procedure was developed for efficient separation of Am and Pu from each other and from interfering matrix and radionuclide components using a TRU-resin TM column. Selective Pu elution is enabled via on-column reduction. The separation was developed using on-line radioactivity detection. After the separation had been developed, fraction collection was used to obtain the separated fractions. In this manner, a FIA instrument functions as an automated separation workstation capable of unattended operation. (author)

  19. 13th Radiochemical Conference. Booklet of Abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-04-01

    The Conference included the following sessions: (i) Opening plenary presentations (6 contributions); (ii) Chemistry of natural radionuclides, discovery of radium and polonium (6 verbal presentations + 5 poster presentations); (iii) Radionuclides in the environment, radioecology (29 + 48); (iv) Activation analysis and other radioanalytical methods (36 + 49); (v) Ionizing radiation in science and technology (12 + 12); (vi) Chemistry of actinide and trans-actinide elements (11 + 14); (vii) Separation methods, speciation (18 + 41); (viii) Production and application of radionuclides (14 + 29); and (ix) Radiochemical problems in nuclear waste management (12 + 22). The majority of verbal presentations has been input to INIS, mostly in the form of the full authors` abstracts. (P.A.)

  20. 13th Radiochemical Conference. Booklet of Abstracts

    International Nuclear Information System (INIS)

    1998-04-01

    The Conference included the following sessions: (i) Opening plenary presentations (6 contributions); (ii) Chemistry of natural radionuclides, discovery of radium and polonium (6 verbal presentations + 5 poster presentations); (iii) Radionuclides in the environment, radioecology (29 + 48); (iv) Activation analysis and other radioanalytical methods (36 + 49); (v) Ionizing radiation in science and technology (12 + 12); (vi) Chemistry of actinide and trans-actinide elements (11 + 14); (vii) Separation methods, speciation (18 + 41); (viii) Production and application of radionuclides (14 + 29); and (ix) Radiochemical problems in nuclear waste management (12 + 22). The majority of verbal presentations has been input to INIS, mostly in the form of the full authors' abstracts. (P.A.)

  1. Analysis of radiochemical impurities in radiopharmaceuticals. Pt. 1. A catalogue of methods. Analytik radiochemischer Verunreinigungen in Radiopharmaka. T. 1. Eine Zusammenstellung von Verfahren

    Energy Technology Data Exchange (ETDEWEB)

    Schuettler, C; Boegl, W

    1979-01-01

    In a study of the relevant literature analytical methods for the determination of radiochemical purity of pharmaceuticals were compiled in form of a dictionary. It contains data on studies of 71 radiopharmaceuticals and a total of 123 analyses. About half of the substances were labelled with I 131. The most frequently used investigation method was thin-layer chromatography (75 analyses), followed by paper chromatography (36 analyses), electrophoresis (10 analyses) and high-pressure liquid chromatography (2 analyses).

  2. Radiochemical verification and validation in the environmental data collection process

    International Nuclear Information System (INIS)

    Rosano-Reece, D.; Bottrell, D.; Bath, R.J.

    1994-01-01

    A credible and cost effective environmental data collection process should produce analytical data which meets regulatory and program specific requirements. Analytical data, which support the sampling and analysis activities at hazardous waste sites, undergo verification and independent validation before the data are submitted to regulators. Understanding the difference between verification and validation and their respective roles in the sampling and analysis process is critical to the effectiveness of a program. Verification is deciding whether the measurement data obtained are what was requested. The verification process determines whether all the requirements were met. Validation is more complicated than verification. It attempts to assess the impacts on data use, especially when requirements are not met. Validation becomes part of the decision-making process. Radiochemical data consists of a sample result with an associated error. Therefore, radiochemical validation is different and more quantitative than is currently possible for the validation of hazardous chemical data. Radiochemical data include both results and uncertainty that can be statistically compared to identify significance of differences in a more technically defensible manner. Radiochemical validation makes decisions about analyte identification, detection, and uncertainty for a batch of data. The process focuses on the variability of the data in the context of the decision to be made. The objectives of this paper are to present radiochemical verification and validation for environmental data and to distinguish the differences between the two operations

  3. Radiochemical stability of radiopharmaceutical preparations

    International Nuclear Information System (INIS)

    Martins, Patricia de A.; Silva, Jose L. da; Ramos, Marcelo P.S.; Oliveira, Ideli M. de; Felgueiras, Carlos F.; Herrerias, Rosana; Zapparoli Junior, Carlos L.; Mengatti, Jair; Fukumori, Neuza T.O.; Matsuda, Margareth M.N.

    2011-01-01

    The 'in vitro' stability studies of the radiopharmaceutical preparations are an essential requirement for routine practice in nuclear medicine and are an important parameter for evaluating the quality, safety and efficacy required for the sanitary registration of pharmaceutical products. Several countries have published guidelines for the evaluation of pharmaceutical stability. In Brazil, the stability studies should be conducted according to the Guide for Conducting Stability Studies published in the Resolution-RE n. 1, of 29th July 2005. There are also for radiopharmaceutical products, two specific resolutions: RDC-63 regulates the Good Manufacturing Practices for Radiopharmaceuticals and RDC-64 provides the Registration of Radiopharmaceuticals, both published on the 18th December 2009. The radiopharmaceutical stability is defined as the time during which the radioisotope can be safely used for the intended purpose. The radiochemical stability can be affected by a variety of factors, including storage temperature, amount of radioactivity, radioactive concentration, presence or absence of antioxidants or other stabilizing agents. The radiochemical stability studies must be established under controlled conditions determined by the effective use of the product. The aim of this work was to evaluate the radiochemical stability of labeled molecules with 131 I, 123 I, 153 Sm, 18 F, 51 Cr, 177 Lu and 111 In as well as 67 Ga and 201 Tl radiopharmaceuticals. Radiochemical purity was evaluated after production and in the validity period, with the maximum activity and in the recommended storage conditions. The analyses were carried out by thin-layer silica gel plate, paper chromatography and gel chromatography. The experimental results showed to be in accordance with the specified limits for all the analysed products. (author)

  4. Statistical processing of technological and radiochemical data

    International Nuclear Information System (INIS)

    Lahodova, Zdena; Vonkova, Kateřina

    2011-01-01

    The project described in this article had two goals. The main goal was to compare technological and radiochemical data from two units of nuclear power plant. The other goal was to check the collection, organization and interpretation of routinely measured data. Monitoring of analytical and radiochemical data is a very valuable source of knowledge for some processes in the primary circuit. Exploratory analysis of one-dimensional data was performed to estimate location and variability and to find extreme values, data trends, distribution, autocorrelation etc. This process allowed for the cleaning and completion of raw data. Then multiple analyses such as multiple comparisons, multiple correlation, variance analysis, and so on were performed. Measured data was organized into a data matrix. The results and graphs such as Box plots, Mahalanobis distance, Biplot, Correlation, and Trend graphs are presented in this article as statistical analysis tools. Tables of data were replaced with graphs because graphs condense large amounts of information into easy-to-understand formats. The significant conclusion of this work is that the collection and comprehension of data is a very substantial part of statistical processing. With well-prepared and well-understood data, its accurate evaluation is possible. Cooperation between the technicians who collect data and the statistician who processes it is also very important. (author)

  5. A LabVIEW®-based software for the control of the AUTORAD platform. A fully automated multisequential flow injection analysis Lab-on-Valve (MSFIA-LOV) system for radiochemical analysis

    International Nuclear Information System (INIS)

    Barbesi, Donato; Vilas, Victor Vicente; Millet, Sylvain; Sandow, Miguel; Colle, Jean-Yves; Heras, Laura Aldave de las

    2017-01-01

    A LabVIEW®-based software for the control of the fully automated multi-sequential flow injection analysis Lab-on-Valve (MSFIA-LOV) platform AutoRAD performing radiochemical analysis is described. The analytical platform interfaces an Arduino®-based device triggering multiple detectors providing a flexible and fit for purpose choice of detection systems. The different analytical devices are interfaced to the PC running LabVIEW®VI software using USB and RS232 interfaces, both for sending commands and receiving confirmation or error responses. The AUTORAD platform has been successfully applied for the chemical separation and determination of Sr, an important fission product pertinent to nuclear waste. (author)

  6. A LabVIEW®-based software for the control of the AUTORAD platform: a fully automated multisequential flow injection analysis Lab-on-Valve (MSFIA-LOV) system for radiochemical analysis.

    Science.gov (United States)

    Barbesi, Donato; Vicente Vilas, Víctor; Millet, Sylvain; Sandow, Miguel; Colle, Jean-Yves; Aldave de Las Heras, Laura

    2017-01-01

    A LabVIEW ® -based software for the control of the fully automated multi-sequential flow injection analysis Lab-on-Valve (MSFIA-LOV) platform AutoRAD performing radiochemical analysis is described. The analytical platform interfaces an Arduino ® -based device triggering multiple detectors providing a flexible and fit for purpose choice of detection systems. The different analytical devices are interfaced to the PC running LabVIEW ® VI software using USB and RS232 interfaces, both for sending commands and receiving confirmation or error responses. The AUTORAD platform has been successfully applied for the chemical separation and determination of Sr, an important fission product pertinent to nuclear waste.

  7. Radiochemical separation of cadmium-109

    International Nuclear Information System (INIS)

    Egamediev, S.; Mukhtarov, A.; Nurbaeva, D.; Rakhmanov, A.

    2006-01-01

    Full text: Cadmium-109 has a half-life of 461.9 days and decays by electron capture to 109 Ag with the emission of 88 keV γ-ray (3.79%) along with the characteristic X-ray from the K level of Ag, with energy of 22.5 keV. This radionuclide has found widespread use as a photon source in x-ray fluorescence analysis devices employed in industry for numerous applications such as the direct determination of gold in ores, the analysis of metals and identification of steels. Other applications range from its use as an electron source for measurement of densities of air-pollution samples, to tracer studies in mushrooms and mice and rats. In the nuclear medicine field there is growing interest in employing 109 Cd in a 109 Cd/ 109mA g generator, as an alternative to other biomedical generators of ultra short-lived gamma emitters. There are several methods for the production of 109 Cd in literature: 1. Bombardment of silver cyclotron target via 109 Ag(d,2n) 109 Cd reaction with 16 MeV deuterons. 2. Bombardment of natural silver target via 109 Ag(p,n) 109 Cd reaction with 14 MeV protons. 3. Proton bombardment of natural indium target with 96 MeV protons. 4. Irradiation of enriched 107 Ag target in high-flux nuclear reactor at neutron flux 2x10 15 n·cm -2 ·s -1 via 107 Ag(n,γ) 108 Ag → 108 Cd (n,γ) 109 Cd reaction. 5. Irradiation of enriched 108 Cd target in nuclear reactor at neutron flux 1x10 14 n·cm -2 ·s -1 via 108 Cd (n,γ) 109 Cd reaction. The production of 109 Cd with proton beam via 109 Ag(p,n) 109 Cd reaction is ideal for the cyclotron U-150, since it is not required the change of the regime for the machine functioning. Because of its relatively long half-life the time required for separation is also not an important factor, but its use as an X-ray source requires a very high radiochemical purity. In the present work we studied two methods for separation of 109 Cd from model solution of silver targets. First method is based on precipitation of silver as

  8. Radiochemical studies of some preparation methods for phosphorus

    International Nuclear Information System (INIS)

    Loos-Neskovic, C.; Fedoroff, M.

    1983-01-01

    Various methods of radiochemical separation were tested for the determination of phosphorus in metals and alloys by neutron activation analysis. Classical methods of separation revealed some defects when they were applied to this problem. Methods using liquid extraction gave low yields and were not reproducible. Methods based on precipitation gave better results, but were not selective enough in most cases. Retention on alumina was not possible without preliminary separations. Authors studied a new radiochemical separation based on the extraction of elemental phosphorus in the gaseous phase after reduction at high temperature with carbon. Measurements with radioactive phosphorus showed that the extraction yield is better than 99%. (author)

  9. Low-level simultaneous determination of As and Sb in standard reference materials using radiochemical neutron activation analysis with isotopic 77As and 125Sb tracers

    International Nuclear Information System (INIS)

    Byrne, A.R.

    1987-01-01

    The aim of the present work was to develop an older method used in our laboratory based on selective solvent extraction of As and Sb as their iodides with toluene, and by the use of the radioisotopic tracers 77 As and 125 Sb, to improve the accuracy by better control of the radiochemical yields. 77 As was produced for each sample run by concurrent irradiation of a few mg of GeO 2 followed by a rapid separation of 77 As from 77 Ge. The radiochemically purified sample fraction containing 76+77 As and 122+125 Sb was counted on a Ge detector in good geometry. The γ-lines of the four nuclides do not mutually interfere so that a combined measurement of As and Sb may be made. The method was applied to IAEA Milk Powder A-11, Animal Muscle H-4, Bowen's Kale and some other SRMs. The results obtained are discussed in the light of literature measurements. From present and previous results, together with data by Heydorn, the presently accepted value for As in Bowen's Kale of 140 ngxg -1 may be 20% too high. (orig.)

  10. Standardization of equations for radiochemical calculations

    International Nuclear Information System (INIS)

    Danahy, R.J.; Dugan, T.A.; Tomlinson, F.K.; Jones, H.W.

    1994-01-01

    In mid 1993, the Fernald Environmental Restoration Management Corporation (FERMCO), with USEPA approval implemented a project quality assurance plan containing performance-based specifications for radiochemical sample analyses conducted in support of the Fernald site remediation activities. FERMCO's initial approach to acquiring performance-based radioanalytical services was to provide limited guidance regarding equations for computation of the quantities required in each analysis report. It became evident that there was a significant divergence of opinion on how to compute some very basic radiochemical quantities. The use of a standardized set of equations was needed in order to ensure comparability of data from different laboratories. In a remediation project of this magnitude, use of multiple laboratories is a virtual necessity. Consequently comparability of data becomes an extremely important issue. A critical issue in the Remedial Investigation/Feasibility Study (RI/FS) phase of the dean up project is to avoid the occurrence of excessive false positive sample results. Such results could lead to unnecessary clean up and significant additional cost. This paper describes the specific formulas FERMCO is currently using to define such quantities as net sample count rate, sample radionuclide concentration, radiometric tracer and gravimetric carrier recovery. Equations have also been produced to define the uncertainty in each of the above quantities. Equations for the Total Propagated Uncertainty (TPU) and for a sample-specific Minimum Detectable Concentration (MDC) have also been specified. Generalized equations have been reformulated to address the specific conditions which apply to the analysis of FERMCO samples. In particular, FERMCO requires results which have been corrected for the radioactivity in the blank while in other instances, sample results without blank correction are required

  11. Determination of As, Cd, Cr, Cu, Hg, Sb and Se concentrations by radiochemical neutron activation analysis in different Brazilian regional diets

    International Nuclear Information System (INIS)

    Favaro, D.I.T.; Maihara, V.A.; Armelin, M.J.A.; Vasconcellos, M.B.A.; Cozzolino, S.M.

    1994-01-01

    Radiochemical separation procedures developed for the determination of seven elements: As, Cd, Cr, Cu, Hg, Sb and Se in different Brazilian regional diets are described. In the case of the elements As, Hg, Sb and Se, the procedure was based on retention in inorganic exchanger TFO (tin dioxide) and determination of Hg by extraction with Ni(DDC) 2 . For determination of Cd, Cr, Cu and Se the procedure chosen was based on retention in inorganic exchanger HMD (hydrated manganese dioxide) and extraction of Cu and Cd as diethyldithiocarbamate compounds. The accuracy and precision of the methods studied were tested by means of analyses of different reference materials-Due to the lack of data on trace element levels in Brazilian foodstuffs and diets, these methods were applied to determination of these elements in different Brazilian regional diets. These s were supplied by the Food and Experimental Nutrition Department of the Faculty of Pharmaceutical Science, University of Sao Paulo. The daily intake values for these diets are presented for As, Cd, Cr, Cu, Hg, Sb and Se. (author) 21 refs.; 6 tabs

  12. Radiochemical purity determination by paper chromatography 2

    International Nuclear Information System (INIS)

    1975-01-01

    The standard relates to the determination of radiochemical impurities in labelled compounds using paper chromatography. The basic terms are given as is the description of procedure and evaluation of chromatograms. (E.S.)

  13. Radiochemistry and radiochemical separations. A current bibliography

    International Nuclear Information System (INIS)

    Bujdoso, E.

    1999-01-01

    A current bibliography for years 1993-1996 with 159 references was compiled on radiochemistry and radiochemical separations based on the INIS Atomindex. The references are arranged in alphabetical order of first authors. (N.T.)

  14. Decontamination and decommission of a radiochemical laboratory building complex

    International Nuclear Information System (INIS)

    Zoubek, Norbert

    2008-01-01

    Full text: Handling of unsealed radioactive substances for research and development purposes in chemical or pharmaceutical industries or research centres as well as production of radioactive substances (e.g. for applications in nuclear medicine or industry) requires operation of special radiochemical laboratories. In general, operation of radiochemical laboratories is strongly regulated by the government and national authorities. The operator needs a permit related to radiological protection. In general, technical requirements for such facilities are very high. To ensure high safety standards with respect to the employees and the environment, several radiological protection measures have to be taken. These measures (for example special shielding or ventilation and waste water systems) depend on various factors, e.g. activity in use, kind of nuclides, chemical properties and volatility of substances. In order to close-down such radiochemical laboratories some radiological protection measures have to be maintained to ensure protection of both humans and the environment induced by possible residual contaminations within the facility including technical inventory. However, a later reuse of the facility as a non-radioactive facility requires removal of all radioactive contamination with respect to national regulation. Resulting radioactive wastes have to be disposed of under control of competent authorities. Based on the experience of a decontamination and decommission project for a former radiochemical laboratory complex, the main steps necessary to release such a facility are discussed. Analytical aspects of initial conditions, necessary organisational structures within the project, resources needed estimation and exploration of the radiological situation in the laboratory, elaboration of a measuring strategy and decontamination methods as well as different waste disposal routes in relation to different waste types are reported. (author)

  15. Proceedings of the Tripartite Seminar on Nuclear Material Accounting and Control at Radiochemical Plants

    International Nuclear Information System (INIS)

    1999-01-01

    The problems of creation and operation of nuclear materials (NM) control and accounting systems and their components at radiochemical plants were discussed in seminar during November 2-6 of 1998. There were 63 Russian and 25 foreign participants in seminar. The seminar programme includes following sessions and articles: the aspects of State NM control and accountancy; NM control and accounting in radiochemical plants and at separate stages of reprocessing of spent nuclear fuel and irradiated fuel elements of commercial reactors; NM control and accountancy in storage facilities of radiochemical plants; NM control and accounting computerization, material balance assessment, preparation of reports; qualitative and quantitative measurements in NM control and accounting at radiochemical plants destructive analysis techniques [ru

  16. Methods for training radiochemical technicians at ORNL

    International Nuclear Information System (INIS)

    Parrott, J.R.; Nicol, R.G.

    The training of personnel to carry out radiochemical operations at ORNL is a formidable and recurrent task since programs are constantly shifting. It is essential that provisions be made for the routine retraining of these personnel if they are to make effective contributions on a continuing basis. Training methods are described that have emerged as a result of thirty years experience in a variety of radiochemical pilot-plant programs. Emphasis is placed on training programs for technicians for the 233 U Processing Facility since essentially all aspects of radiochemical operations are encountered in this facility. These programs have included operations performed in glove boxes, hot-cell manipulator work handling high-neutron-emitting isotopes, and the entire spectrum of remote solvent extraction operations. (U.S.)

  17. Studies on some Indian paints for radiochemical plants

    International Nuclear Information System (INIS)

    Mahesh Kumar, V.V.; Srinivasan, R.; Natarajan, R.

    1996-01-01

    The choice of paints in areas subjected to contamination and radiation in nuclear installation need special attention. The types of generic coatings are examined with reference to these requirements. Among those examined, certain types of epoxy paints are found to be attractive for these applications. Samples of epoxy paints obtained from some Indian manufacturers are tested for their suitability. Decontaminability and radiation resistance properties are also evaluated with special reference to radiochemical plants. Important specifications for such applications are listed. This report summarizes the results of these studies. (author)

  18. Radiochemical Solar Neutrino Experiments - Successful and Otherwise

    International Nuclear Information System (INIS)

    Hahn, R.L.

    2008-01-01

    Over the years, several different radiochemical systems have been proposed as solar neutrino detectors. Of these, two achieved operating status and obtained important results that helped to define the current field of neutrino physics: the first solar-neutrino experiment, the Chlorine Detector ( 37 Cl) that was developed by chemist Raymond Davis and colleagues at the Homestake Mine, and the subsequent Gallium ( 71 Ga) Detectors that were operated by (a) the SAGE collaboration at the Baksan Laboratory and (b) the GALLEX/GNO collaborations at the Gran Sasso National Laboratory. These experiments have been extensively discussed in the literature and in many previous International Neutrino Conferences. In this paper, I present important updates to the results from SAGE and GALLEX/GNO. I also review the principles of the radiochemical detectors and briefly describe several different detectors that have been proposed. In light of the well-known successes that have been subsequently obtained by real-time neutrino detectors such as Kamiokande, Super-Kamiokande, SNO, and KamLAND, I do not anticipate that any new radiochemical neutrino detectors will be built. At present, only SAGE is still operating; the Chlorine and GNO radiochemical detectors have been decommissioned and dismantled

  19. Radiochemical solar neutrino experiments, 'successful and otherwise'

    International Nuclear Information System (INIS)

    Hahn, Richard L

    2008-01-01

    Over the years, several different radiochemical systems have been proposed as solar neutrino detectors. Of these, two achieved operating status and obtained important results that helped to define the current field of neutrino physics: the first solar-neutrino experiment, the Chlorine Detector ( 37 Cl) that was developed by chemist Raymond Davis and colleagues at the Homestake Mine, and the subsequent Gallium ( 71 Ga) Detectors that were operated by (a) the SAGE collaboration at the Baksan Laboratory and (b) the GALLEX/GNO collaborations at the Gran Sasso National Laboratory. These experiments have been extensively discussed in the literature and in many previous International Neutrino Conferences. In this paper, I present important updates to the results from SAGE and GALLEX/GNO. I also review the principles of the radiochemical detectors and briefly describe several different detectors that have been proposed. In light of the well-known successes that have been subsequently obtained by real-time neutrino detectors such as Kamiokande, Super-Kamiokande, SNO, and KamLAND, I do not anticipate that any new radiochemical neutrino detectors will be built. At present, only SAGE is still operating; the Chlorine and GNO radiochemical detectors have been decommissioned and dismantled.

  20. Radiochemical studies on nuclear fission at Trombay

    Indian Academy of Sciences (India)

    227Ac to 245Cm were determined by radiochemical methods which involved ... foil, followed by direct γ counting using high resolution Ge(Li) detector was also ... the stiffness to mass asymmetric distortion decreases on either side of lead.Also ...

  1. Mercury determination in geological samples using radiochemical separation

    International Nuclear Information System (INIS)

    Goncalves, Cristina; Favaro, Deborah I.T.

    1997-01-01

    In this work, a radiochemical procedure is presented to increase the neutron activation analysis sensitivity. After irradiation, geological reference materials - Buffalo River Sediment (BRS- - NIST SRM 2704), Lake Sediment (BCR - CRM 280) and GXR-5 (USGS - AEG) - were leached with aqua regia in a Parr bomb placed in a domestic microwave oven and then bismuth diethyl dithiocarbamate was used to pre concentrate mercury by solvent extraction. This procedure eliminates the interference from 279 keV Se-75 photopeak and background radiation from 511 keV Cu-64 photopeak. (author). 15 refs., 2 figs., 1 tab

  2. International intercalibration as a method for control of radiochemical analyses

    International Nuclear Information System (INIS)

    Angelova, A.; Totseva, R.; Karaivanova, R.; Dandulova, Z.; Botsova, L.

    1994-01-01

    The participation of the Radioecology Section at the National Centre for Radiology and Radiation Protection (NCRRP) in the International Interlaboratory Comparison of radiochemical analyses organized by WHO is reported. The method of evaluating accuracy of the results from inter calibrations concerning radionuclide determination of environmental samples is outlined. The data from analysis of cesium 137, strontium 90 and radium 226 in milk, sediments, soil and seaweed made by 21 laboratories are presented. They show a good accuracy values of the results from NCRRP. 1 tab. 2 figs., 6 refs

  3. Methods for training radiochemical technicians at ORNL

    International Nuclear Information System (INIS)

    Parrott, J.R.; Nicol, R.G.

    1975-01-01

    The training of personnel to carry out radiochemical operations at ORNL is a formidable and recurrent task since repetitive, production-type operations are not involved, and programs are constantly shifting. It is essential that provisions be made for the routine retraining of personnel if they are to make effective contributions on a continuing basis. The present training methods have emerged as a result of thirty years experience in a variety of radiochemical pilot-plant programs. These programs have included operations performed in glove boxes, hot-cell manipulator work handling high-neutron-emitting isotopes, and the entire spectrum of remote solvent extraction operations. Present methods of training and the results obtained are summarized

  4. Automated radiochemical processing for clinical PET

    International Nuclear Information System (INIS)

    Padgett, H.C.; Schmidt, D.G.; Bida, G.T.; Wieland, B.W.; Pekrul, E.; Kingsbury, W.G.

    1991-01-01

    With the recent emergence of positron emission tomography (PET) as a viable clinical tool, there is a need for a convenient, cost-effective source of the positron emitter-labeled radiotracers labeled with carbon-11, nitrogen-13, oxygen-15, and fluorine-18. These short-lived radioisotopes are accelerator produced and thus, require a cyclotron and radiochemistry processing instrumentation that can be operated 3 in a clinical environment by competant technicians. The basic goal is to ensure safety and reliability while setting new standards for economy and ease of operation. The Siemens Radioisotope Delivery System (RDS 112) is a fully automated system dedicated to the production and delivery of positron-emitter labeled precursors and radiochemicals required to support a clinical PET imaging program. Thus, the entire RDS can be thought of as an automated radiochemical processing apparatus

  5. Radiochemical Means of Investigating Delayed Neutron Precursors

    International Nuclear Information System (INIS)

    Marmol, P. del

    1968-01-01

    Fast radiochemical methods used now for the determination of delayed neutron precursors are classified and reviewed: precipitations, solvent extractions, range experiments, milking, gas sweeping, isotopic and ion exchange, hot atom reactions and diffusion loss. Advantages and limitations of irradiation systems with respect to fast separations are discussed: external beams which allow faster separations only have low neutron fluxes, internal beams which are mostly fit for gaseous reactions; and rabbits for solution irradiations. Future prospects of radiochemical procedures are presented; among these, studies should be mostly oriented towards gaseous reactions which offer possibilities of isolating very short-lived delayed neutron precursors. Chemical procedures for delayed neutron precursor detection are compared with mass spectrometric and isotope separator techniques; it is concluded that the methods are complementary. (author)

  6. Radiochemical Means of Investigating Delayed Neutron Precursors

    International Nuclear Information System (INIS)

    Marmol, P. del

    1968-01-01

    Fast radiochemical methods used now for the determination of delayed neutron precursors are classified and reviewed: precipitations, solvent extractions, range experiments, milking, gas sweeping, isotopic and ion exchange, hot-atom reactions and diffusion loss. Advantages and limitations of irradiation systems with respect to fast separations are discussed: external beams which allow faster separations only have low neutron fluxes, internal beams which are mostly fit for gaseous reactions; and rabbits for solution irradiations. Future prospects of radiochemical procedures are presented; among these, studies should be mostly oriented towards gaseous reactions which offer possibilities of isolating very short-lived delayed neutron precursors. Chemical procedures for delayed neutron precursor detection are compared with mass spectrometric and isotope-separator techniques; it is concluded that the methods are complementary. (author)

  7. Imaging Scanner Usage in Radiochemical Purity Test

    International Nuclear Information System (INIS)

    Norhafizah Othman; Yahaya Talib; Wan Hamirul Bahrin Wan Kamal

    2011-01-01

    Imaging Scanner model BIOSCAN AR-2000 has been used in the radiochemical purity test for the product of Mo-99/ Tc-99m generator. Result from this test was produced directly where the percentage of pertechnetate was calculated based on width peak area by thin layer chromatography. This paperwork will explain the function, procedure, calibration of the instrument and discussed the advantages compared to the previous method. (author)

  8. 14th radiochemical conference. Booklet of abstracts

    International Nuclear Information System (INIS)

    2002-03-01

    The contributions dealt with the following topics: Radionuclides in the environment, radioecology; Nuclear analytical methods; Chemistry of actinide and trans-actinide elements; Ionizing radiation in science, technology, and arts and cultural heritage preservation; Production and application of radionuclides; Separation methods, speciation; Chemistry of nuclear fuel cycle, radiochemical problems in nuclear waste management; and Nuclear methods in medicine, radiopharmaceuticals, and radiodiagnostics, labelled compounds. Of the verbal and poster presentation, 192 have been input to INIS. (P.A.)

  9. Radiochemical method for 63Ni

    International Nuclear Information System (INIS)

    Holm, E.; Nilsson, U.; Hallstadius, L.

    1985-01-01

    A radianalytical method for the determination of 63 Ni content in environmental samples of activated corrosion products is described. After chemical separation and electrodepositing of 63 Ni on silver briquets, the chemical yield is determined by X-ray fluorescence analysis. For the detection of low-energy beta activity, an open gas flow GM-counter with an anticoincidence guard counter is put to use

  10. Infralevel radiochemical applications-II

    International Nuclear Information System (INIS)

    Schachter, M.M.

    1989-01-01

    This paper discusses several practical applications of low level nuclear radiation from natural sources, and even from a man-made source-spent nuclear fuel elements from dismantled nuclear power plant reactors. The natural sources are the ubiquitous potassium 40 in the Earth's crust and the non-weapon isotope of uranium-238. Additionally, in this research it is appropriate to include the non-nuclear processes as the various forms of luminescences and the quasi-nuclear Cerenkov luminescence, since fluorescence can be induced by nuclear radiation, as is Cerenkov radiation; chemiluminescence can be initiated by nuclear radiation, and the secondary processes of nuclear radiation caused by the Compton effect, the (Irene) Curie effect, and the unusual and unique effect of a 3 He alpha-particle reacting oppositely from the beta-ray decay of 3 H, can influence and produce all the known luminescences. The conclusions from the small amount of research carried out are predominantly tentative and even conjectural. The device described is being called a nuclear electrophorus since its functional properties are the same as the static electricity-producing electrophorus of the late 19th Century

  11. A radiochemical analyses of metastudtite and leachates from spent fuel

    International Nuclear Information System (INIS)

    McNamara, Bruce K.; Hanson, Brady D.; Buck, Edgar C.; Soderquist, Chuck Z.

    2004-01-01

    Immersion of commercial spent nuclear fuel (CSNF) in deionized water produced two novel corrosion products after a two-year contact period. Another unexpected result was that suspensions of aggregates were observed to form at the air-water interface for each of five samples. These solids were characterized, by SEM and XRD to be nearly pure metastudtite (UO4-2H2O); while the corrosion present on the surface of the fuel itself was determined to be studtite (UO4-2H2O). The occurrence of the floating phase prompted a radiochemical analysis of these solids. This chemical analysis was a unique opportunity to study the relatively pure corrosion phase for incorporation of radionuclides. The analysis indicated that high concentration of 90Sr, 137Cs, 99Tc, and that lower concentrations 237Np, 238, 239Pu and 243, 244Cm had partitioned with the air-water interface aggregates. The concentrations of 241Am were two orders of magnitude lower than the expected inventory in the suspended solids. The radiochemical analyses of the several leachate samples provide preliminary solubility data for the hydrogen peroxide leaching of CSNF and these data are compared to leaching of the same fuel in J-13 and deionized waters. The extent of fuel dissolution in these media are discussed

  12. Comparison of two ultra-sensitive methods for the determination of 232Th by recovery corrected pre-concentration radiochemical neutron activation analysis

    International Nuclear Information System (INIS)

    Glover, S.E.; Qu, H.; LaMont, S.P.; Grimm, C.A.; Filby, R.H.

    2001-01-01

    The determination of isotopic thorium by alpha spectrometric methods is a routine practice for bioassay and environmental measurement programs. Alpha-spectrometry has excellent detection limits (by mass) for all isotopes of thorium except 232 Th due to its extremely long half-life. Improvements in the detection limit an sensitivity over previously reported methods of pre-concentration neutron activation analysis (PCNAA) for the recovery corrected, isotopic determination of thorium in various matrices is discussed. Following irradiation, the samples were dissolved, 231 Pa added as a tracer, and Pa isolated by two different methods and compared (extraction chromatography and anion exchange chromatography) followed by alpha spectrometry for recovery correction. Ion exchange chromatography was found to be superior for this application at this time, principally for reliability. The detection limit for 232 Th of 3.5 x 10 -7 Bq is almost three orders of magnitude lower than for alpha spectrometry using the PCRNAA method and one order of magnitude below previously reported PCNAA methods. (author)

  13. Validation of a an analysis method of Marine Bio toxins Type Saxitoxin based on test coupled receptor (RBA) with Radiochemical Detection with liquid scintillation

    International Nuclear Information System (INIS)

    Selmi, Zied

    2009-01-01

    The saxitoxin s are bio toxins belonging to the family of toxins of the type PSP. They are paralysing toxins secreted by marine micro-organisms, phytoplankton, called Alexandrium. They constitute a risk for the human health in the event of their consumption in contaminated food. The acceptable maximum limit of these bio toxins in molluscs and shellfish is fixed to 800 μg /kg of meat of molluscs or shellfish. It proves, thus, that it is essential to develop and validate analytical methods for the level monitoring of contamination of the marine resources by these species in order to found a program of their monitoring and to guarantee an acceptable level of the food safety of the products available on the national and international markets. The present work allowed the validation of the quantification method of these toxins which is based on the use of the Receptor Binding Assay (RBA) with liquid scintillation nuclear technique detection using tritium as radiotracer and while proceeding by the different statistical tests of validation (Standard Nf XP T 90-210). The field of linearity ranged from 0 to 20 n M and the limit of detection was found to be 1 n M. The validation of this method will allow the reinforcement of the analytical means of analysis of marine bi toxins type SXT and to set up, in the near future, a monitoring and surveillance routine program for these bio toxins at the national, regional and African scales. (Author)

  14. Comparison of different thin layer detection techniques to determine the radiochemical purity of radiopharmaceuticals

    International Nuclear Information System (INIS)

    Hammermaier, A.; Reich, E.; Boegl, W.

    1985-01-01

    Ten radiopharmaceuticals frequently used in clinical treatment were examined as to their radiochemical purity by paper and thin layer chromatography or electrophoresis, respectively. It is known that radiochemical impurities may result in an unnecessary exposure of the patients to be examined. Other than determining the radiochemical purity of several radiopharmaceuticals, a comparison of the different measuring methods of distributing activity on radiochromatograms or electropherograms is intended by this study. For this, the activity distribution in the developed radiochromatograms was assessed by four different measuring methods (TLC-linear analyzer, TLC-scanner with NaI(Tl) detector, TLC-scanner with gas flow counter and NaI(Tl) well-typ counter). As shown by the above analysis, only the TLC-linear analyzer and the NaI(Tl) well-typ counter (measurement of chromatograms or electropherograms cut into strips) are generally suitable methods for determining the radiochemical purity of radiochemicals, the TLC-scanner with gas flow counter is usable in most cases, while TLC-scanner with NaI(Tl) detector is yielding unsatisfactory results. (orig.) [de

  15. Northern Marshall Islands Radiological Survey: a quality-control program for a radiochemical analyses

    International Nuclear Information System (INIS)

    Jennings, C.D.; Mount, M.E.

    1983-08-01

    More than 16,000 radiochemical analyses were performed on about 5400 samples of soils, vegetation, animals, fish, invertebrates, and water to establish amounts of 90 Sr, 137 Cs, 241 Am, and plutonium isotopes in the Northern Marshall Islands. Three laboratories were contracted by Lawrence Livermore National Laboratory to perform the radiochemical analyses: Environmental Analysis Laboratory (EAL), Richmond, California; Eberline Instrument Corporation (EIC), Albuquerque, New Mexico; and Laboratory of Radiation Ecology (LRE), University of Washington, Seattle, Washington. The analytical precision and accuracy were monitored by regularly including duplicate samples and natural matrix standards in each group of about 100 samples analyzed. Based on the duplicates and standards, over 83% of the radiochemical analyses in this survey were acceptable - 97% of the analyses by EAL, 45% of the analyses by EIC, and 98% of the analyses by LRE

  16. Radiochemical analysis of halogenides Pt. 4

    International Nuclear Information System (INIS)

    Stary, J.; Kratzer, K.

    1981-01-01

    A new highly selective and simple radioreagent method has been developed for the determination of iodide ion in the p.p.b. range. The procedure consists in the addition of phenylmercury-203 nitrate to the aqueous sample and in the extraction of the phenylmercury-203 iodide formed into benzene. The method has been applied for the determination of iodide in river, drinking and mineral waters. (author)

  17. Radiochemical analysis of fallout in Norway

    Energy Technology Data Exchange (ETDEWEB)

    Bergh, H; Finstad, G; Lund, L; Michelsen, O; Ottar, B

    1957-01-01

    Data are tabulated on the concentration of radioactive iodine and strontium in samples of milk, and radioactive strontium and cesium in samples of drinking water collected in Norway, January to May 1957.

  18. Radiochemical analysis of fallout in Norway

    Energy Technology Data Exchange (ETDEWEB)

    Bergh, H; Finstad, G; Lund, L; Michelsen, O; Ottar, B

    1957-01-01

    Data are tabulated on the concentration of radioactive iodine, strontium, and cesium in samples of milk and radioactive strontium and cesium in samples of drinking water collected in Norway during June 1957.

  19. Radiochemical analysis of fallout in Norway

    Energy Technology Data Exchange (ETDEWEB)

    Bergh, H; Finstad, G; Lund, L; Michelsen, O; Ottar, B

    1957-01-01

    Data are tabulated on the concentration of radioactive iodine, strontium, and cesium in samples of milk collected in Norway in September 1957. Data are included from experiments on the purification of water contaminated with radioactive strontium and cesium.

  20. Radiochemical analysis of fallout in Norway

    Energy Technology Data Exchange (ETDEWEB)

    Bergh, H; Finstad, G; Lund, L; Michelsen, O; Ottar, B

    1957-01-01

    Data are tabulated on the concentration of radioactive iodine, strontium, and cesium in samples of milk, radioactive strontium and cesium in samples of rain water, and radiocesium in preparations of tea and coffee collected in Norway during July and August 1957.

  1. Radiochemical analysis of fallout in Norway

    Energy Technology Data Exchange (ETDEWEB)

    Bergh, H; Finstad, G; Lund, L; Michelsen, O; Ottar, B

    1957-01-01

    Data are tabulated on the concentration of radioactive iodine and strontium in samples of milk, radioactive strontium and cesium in samples of drinking water, and radioactive strontium in tea and coffee preparations collected in Norway during May 1957.

  2. Kit preparation of 153Sm-EDTMP and factors affecting radiochemical purity and stability

    International Nuclear Information System (INIS)

    Ferro-Flores, G.; Tendilla, J.I.; Lopez-Gomez, M.A.; Aguilar-Hernandez, F.; Gonzalez-Zavala, M.A.; Parades-Gutierrez, L.; Avila-Ramirez, E.

    1996-01-01

    A fast kit method was developed for the production of 153 Sm-EDTMP in two steps avoiding the use of nitric acid, evaporation and sterilization of the final solution by autoclave. Methods of analysis for the determination of chemical and radiochemical purity in the radiopharmaceutical solution were established. Factors affecting radiochemical purity and stability of the complex as the molar ratio of EDTMP/Sm, concentration of phosphate buffer and neutralization of EDTMP prior kit preparation were also analyzed. The use of this radiopharmaceutical in rabbits and patients showed selective skeletal uptake. (author). 5 refs., 4 figs., 3 tabs

  3. Facility Effluent Monitoring Plan for the 325 Radiochemical Processing Laboratory

    International Nuclear Information System (INIS)

    Shields, K.D.; Ballinger, M.Y.

    1999-03-01

    This Facility Effluent Monitoring Plan (FEMP) has been prepared for the 325 Building Radiochemical Processing Laboratory (RPL) at the Pacific Northwest National Laboratory (PNNL) to meet the requirements in DOE Order 5400.1, ''General Environmental Protection Programs.'' This FEMP has been prepared for the RPL primarily because it has a ''major'' (potential to emit >0.1 mrem/yr) emission point for radionuclide air emissions according to the annual National Emission Standards for Hazardous Air Pollutants (NESHAP) assessment performed. This section summarizes the airborne and liquid effluents and the inventory based NESHAP assessment for the facility. The complete monitoring plan includes characterization of effluent streams, monitoring/sampling design criteria, a description of the monitoring systems and sample analysis, and quality assurance requirements. The RPL at PNNL houses radiochemistry research, radioanalytical service, radiochemical process development, and hazardous and radioactive mixed waste treatment activities. The laboratories and specialized facilities enable work ranging from that with nonradioactive materials to work with picogram to kilogram quantities of fissionable materials and up to megacurie quantities of other radionuclides. The special facilities within the building include two shielded hot-cell areas that provide for process development or analytical chemistry work with highly radioactive materials and a waste treatment facility for processing hazardous, mixed radioactive, low-level radioactive, and transuranic wastes generated by PNNL activities

  4. Facility Effluent Monitoring Plan for the 325 Radiochemical Processing Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Shields, K.D.; Ballinger, M.Y.

    1999-04-02

    This Facility Effluent Monitoring Plan (FEMP) has been prepared for the 325 Building Radiochemical Processing Laboratory (RPL) at the Pacific Northwest National Laboratory (PNNL) to meet the requirements in DOE Order 5400.1, ''General Environmental Protection Programs.'' This FEMP has been prepared for the RPL primarily because it has a ''major'' (potential to emit >0.1 mrem/yr) emission point for radionuclide air emissions according to the annual National Emission Standards for Hazardous Air Pollutants (NESHAP) assessment performed. This section summarizes the airborne and liquid effluents and the inventory based NESHAP assessment for the facility. The complete monitoring plan includes characterization of effluent streams, monitoring/sampling design criteria, a description of the monitoring systems and sample analysis, and quality assurance requirements. The RPL at PNNL houses radiochemistry research, radioanalytical service, radiochemical process development, and hazardous and radioactive mixed waste treatment activities. The laboratories and specialized facilities enable work ranging from that with nonradioactive materials to work with picogram to kilogram quantities of fissionable materials and up to megacurie quantities of other radionuclides. The special facilities within the building include two shielded hot-cell areas that provide for process development or analytical chemistry work with highly radioactive materials and a waste treatment facility for processing hazardous, mixed radioactive, low-level radioactive, and transuranic wastes generated by PNNL activities.

  5. Analysis of Hydrologic Properties Data

    International Nuclear Information System (INIS)

    Liu, H.H.; Ahlers, C.F.

    2001-01-01

    The purpose of this Analysis/Model Report (AMR) is to describe the methods used to determine hydrologic properties based on the available field data from the unsaturated zone at Yucca Mountain, Nevada. This is in accordance with the AMR Development Plan (DP) for U0090 Analysis of Hydrologic Properties Data (CRWMS M and O 1999c). Fracture and matrix properties are developed by compiling and analyzing available survey data from the Exploratory Studies Facility (ESF), Cross Drift of Enhanced Characterization of Repository Block (ECRB), and/or boreholes; air injection testing data from surface boreholes and from boreholes in ESF; in-situ measurements of water potential; and data from laboratory testing of core samples

  6. Diaphragms obtained by radiochemical grafting in PTFE

    International Nuclear Information System (INIS)

    Nenner, T.; Fahrasmane, A.

    1984-01-01

    Diaphragms for alkaline water electrolysis are prepared by radiochemical grafting of PTFE fabric with styrene, which is later on sulfonated, or with acrylic acid. The diaphragms obtained are mechanically resistant to potash at temperatures up to 200 0 C, but show some degrafting, which limits the lifetime. The sulfonated styrene group has been found to be more stable in electrolysis than the acrylic acid. In both cases, the incorporation of a cross-linking agent like divinyl benzene improves the lifetime of the diaphragms. Electrolysis during 500 hours at 120 0 C and 10 kAm 2 could be performed. (author)

  7. Hanford radiochemical site decommissioning demonstration program

    International Nuclear Information System (INIS)

    Nelson, D.C.

    1971-01-01

    A program is proposed for the innovation, development, and demonstration of technologies necessary to decommission the Hanford radiochemical plant area to the extent that the sites can have unrestricted public access. The five tasks selected for development and demonstration of restoration techniques were restoration of a burial ground, decommissioning of a separations plant, restoration of a separations plant waste interim storage tank farm, restoration of a liquid disposal area, and disposal of large contaminated equipment. Process development requirements are tabulated and discussed. A proposed schedule and estimated costs are given

  8. Synthesis of N-[methyl-11C]hydromorphone by using multivariate strategies for optimization of radiochemical yields

    International Nuclear Information System (INIS)

    Rimland, Annika; Bergson, Goeran; Obenius, Ulf; Sjoeberg, Stefan; Langstroem, Bengt

    1987-01-01

    The synthesis of N-[methyl- 11 C]hydromorphone has been performed by using [ 11 C]methyl iodide and desmethyl hydromorphone in a mixture of dimethylsulphoxide and dimethylformamide as solvent. Optimization of the radiochemical yield by varying the reaction conditions was performed by using multivariate strategies. The labelled hydromorphone was obtained in 72% radiochemical yield in the alkylation reaction with [ 11 C]-methyl iodide, counted from the end of the [ 11 C]methyl iodide synthesis. N-[Methyl- 11 C]hydromorphone was obtained as a ready injectable pharmaceutical solution with a total synthesis time of 40 min and in a 10% total radiochemical yield, with a radiochemical purity > 99.5%, according to HPLC analysis. (author)

  9. Analysis of Hydrologic Properties Data

    Energy Technology Data Exchange (ETDEWEB)

    H. H. Liu

    2003-04-03

    This Model Report describes the methods used to determine hydrologic properties based on the available field data from the unsaturated zone (UZ) at Yucca Mountain, Nevada, and documents validation of the active fracture model (AFM). This work was planned in ''Technical Work Plan (TWP) for: Performance Assessment Unsaturated Zone'' (BSC 2002 [160819], Sections 1.10.2, 1.10.3, and 1.10.8). Fracture and matrix properties are developed by analyzing available survey data from the Exploratory Studies Facility (ESF), Cross Drift for Enhanced Characterization of Repository Block (ECRB), and/or boreholes; air injection testing data from surface boreholes and from boreholes in the ESF; and data from laboratory testing of core samples. The AFM is validated on the basis of experimental observations and theoretical developments. This report is a revision of an Analysis Model Report, under the same title, as a scientific analysis with Document Identifier number ANL-NBS-HS-000002 (BSC 2001 [159725]) that did not document activities to validate the AFM. The principal purpose of this work is to provide representative uncalibrated estimates of fracture and matrix properties for use in the model report ''Calibrated Properties Model'' (BSC 2003 [160240]). The present work also provides fracture geometry properties for generating dual permeability grids as documented in the Scientific Analysis Report, ''Development of Numerical Grids for UZ Flow and Transport Modeling'' (BSC 2003 [160109]). The resulting calibrated property sets and numerical grids from these reports will be used in the Unsaturated Zone Flow and Transport Process Model (UZ Model), and Total System Performance Assessment (TSPA) models. The fracture and matrix properties developed in this Model Report include: (1) Fracture properties (frequency, permeability, van Genuchten a and m parameters, aperture, porosity, and interface area) for each UZ Model layer; (2

  10. The radiochemical purity of radiotracers as the criterion of their usefulness in investigations of hydrocarbons distillation

    International Nuclear Information System (INIS)

    Kolaczkowski, M.

    1976-01-01

    Among numerous analytic techniques of separation and analysis of radioactive products gas radiochromatography has proved to be particularly suitable. Organic bromides labelled with 82 Br-radionuclide are investigated. The analytic gas chromatographs equipped with appropriately constructed radiochromatographic attachments are used. The results of radiochemical purity determination of radiotracers are compared for various techniques. (author)

  11. Radiochemical plasma salicylamide assay using ring-labeled tritiated salicylamide

    Energy Technology Data Exchange (ETDEWEB)

    Stella, V J; Varia, S A; Riedy, M

    1979-05-01

    A rat plasma salicylamide assay was developed using ring-labeled tritiated salicylamide, synthesized by reacting salicylamide with tritium oxide in the presence of heptafluorobutyric acid. The reaction yielded /sup 3/H-salicylamide of specific activity up to 8.41 mCi/mmole, 60% yield. Plasma containing /sup 3/H-salicylamide and its metabolites was extracted with a toluene-based scintillation fluid, which was subsequently counted. Specificity for free salicylamide was demonstrated by radiochemical and standard fluorescence plasma salicylamide level-time curves. Specificity resulted from nonextraction of the salicylamide sulfate and glucuronide metabolites. Sulfatase and beta-glucuronidase treatment allowed the analysis of plasma sulfate and glucuronide conjugates as free salicylamide. This procedure should be effective for the analysis of salicylamide and its metabolites in the presence of similar phenolic compounds.

  12. Application of radiochemical determination methods in cleanability research of building materials

    International Nuclear Information System (INIS)

    Maeaettae, Jenni; Kymaelaeinen, Hanna-Riitta; Sjoeberg, Anna-Maija

    2011-01-01

    During recent years increasing effort has been made to modify surface properties with easy-to-clean or self-cleaning characteristics, and concomitantly there is a need to be able to quantify cleanability. Methodology is a complex issue, including aspects of selection and characterization of the surface materials, the soiling materials (contaminants), soiling and cleaning methods, and the detection methods. Different biological, chemical, physical and visual methods have been included in studies of surface cleanability. One challenge has been to obtain quantitative information about soiling. The radiochemical methods, gamma spectrometry (NaI(Tl)-crystal) and liquid scintillation counting, have been shown to be suitable for evaluating cleanability of different surface materials and different soiling material types, providing quantitative information about the amount of soiling material both on and beneath the surface. Due to the different labelled soiling components, the interaction of the surface with different soiling material types can be evaluated. Radiochemical methods have unique benefits particularly for examining porous materials and surfaces. However, they are suitable only for highly controlled studies because of the hazards. Different features and details of radiochemical methods are discussed with the view to aid planning of future cleanability studies. - Highlights: → Radiochemical methods can be used for cleanability studies. → These methods give quantitative information about the amount of soiling material. → These methods are suitable particularly for examining porous materials. → These methods are suitable for highly controlled studies because of the hazards.

  13. Cleanout and decontamination of radiochemical hot cells

    International Nuclear Information System (INIS)

    Surma, J.E.; Holton, L.K. Jr.; Katayama, Y.B.; Gose, J.E.; Haun, F.E.; Dierks, R.D.

    1990-01-01

    The Pacific Northwest Laboratory is developing and employing advanced remote and contact technologies in cleaning out and decontaminating six radiochemical hot cells at Hanford under the Department of Energy's Surplus Facilities Management Program. The program is using a series of remote and contact decontamination techniques to reduce costs and to significantly lower radiation doses to workers. Refurbishment of the cover blocks above the air lock trench reduced radiation exposure in the air lock and cleanout and decontamination of an analytical cell achieved a reduction in radioactive contamination. Nuclear Regulatory Commission-approved Type B burial boxes are also being used to reduce waste disposal costs and radiation doses. PNL is currently decommissioning its pilot-scale radioactive liquid-fed ceramic melter. Special tools have been developed and are being used to accomplish the world's first such effort. 4 refs., 5 figs

  14. Mixing and sampling tests for Radiochemical Plant

    International Nuclear Information System (INIS)

    Ehinger, M.N.; Marfin, H.R.; Hunt, B.

    1999-01-01

    The paper describes results and test procedures used to evaluate uncertainly and basis effects introduced by the sampler systems of a radiochemical plant, and similar parameters associated with mixing. This report will concentrate on experiences at the Barnwell Nuclear Fuels Plant. Mixing and sampling tests can be conducted to establish the statistical parameters for those activities related to overall measurement uncertainties. Density measurements by state-of-the art, commercially availability equipment is the key to conducting those tests. Experience in the U.S. suggests the statistical contribution of mixing and sampling can be controlled to less than 0.01 % and with new equipment and new tests in operating facilities might be controlled to better accuracy [ru

  15. Radiochemical studies on the separation of iodine-131 and radioiodination of some organic compounds

    International Nuclear Information System (INIS)

    Mohamed, M.A.I.

    2010-01-01

    This thesis is constituted of three chapters:Chapter I: It deals with the theoretical consideration of the subject. The chapter deals with the importance of radioisotopes in medical applications, and the physical and biological properties of these isotopes. Also, this part deals with the chemical and physical properties of both tellurium and iodine and the methods of the production of radioiodine from tellurium targets especially dry distillation method and ion exchange method. It deals with general methods of labeling, chemistry of iodine especially the most frequently used in nuclear medicine, their methods of production and applications. It includes also the techniques used for the preparation of the radioiodinated compounds, especially the electrophilic technique or the oxidative radioiodination technique. In this technique, oxidizing agents are used to oxidize iodide ions to iodonium ions capable of electrophilic attack on the aryl group of the organic compound. This chapter deals also with the receptor tracers, their types and the effects that can occur due to the binding of these receptors to the cell membrane. Since these radiopharmaceuticals are used for diagnosis and therapeutic treatment of human diseases, quality control tests such as chemical purity, radionuclidic purity, radiochemical purity, sterility, apyrogenicity and biodistribution are performed to ensure the purity, the safety and efficiency of these products for the intended nuclear medicine application.Chapter II:It contains detailed information concerning the chemicals, reagents, the radionuclides, the equipment and the counting systems used in the study. It describes production technique of iodine-131 using dry distillation method. It describes also the electrophilic radioiodination for each of Y-indole and epidepride. Analysis of the labeled products was performed using two chromatographic techniques. The first technique is thin layer chromatography in which the compound was identified by

  16. The use of cuprous iodide as a precipitation matrix in the radiochemical determination of 131I in milk

    International Nuclear Information System (INIS)

    McCurdy, D.E.; Mellor, R.A.; Lambdin, R.W.; McLain, M.E. Jr.

    1980-01-01

    As a result of the implementation of the As Low As is Reasonably Achievable philosophy to the nuclear power industry, recent U.S. Nuclear Regulatory Commission requirements have prompted high sensitivity radiochemical analysis for the measurement of 131 I in milk. The most recognized and commonly employed technique incorporates costly palladium iodide as the final precipitate in the radiochemical purification of the iodine chemical species. The procedure presented in this paper outlines the many advantages of using cuprous iodide as the final precipitate. These include lower cost per analysis, consistent recoveries, better precipitate matrix and good self absorption characteristics. Typical lower limit of detection values and operating characteristics obtained for high sensitivity β-γ analysis as well as gas proportional counting and a comparison of radiochemical and Ge(Li) spectrometric results for environmental samples collected during a recent Chinese weapons fallout incident are presented. (author)

  17. Radiochemical surveillance of KNK primary sodium

    International Nuclear Information System (INIS)

    Stamm, H.-H.; Stade, K.Ch.

    1987-05-01

    Radiochemical surveillance of the KNK primary sodium has been performed now for 15 years with 953 effective full-power days. The overflow method used for sodium sampling proved to be reliable. Different crucible materials have been used for different analytical tasks. The amount of radionuclides in the primary system has not given restrictions to plant operation at any time. On-line gamma spectroscopy on pipings and components of the primary circuits was accomplished in reactor downtimes. Activity depositions on the walls were dominated by Ta-182 after KNK I operation. Main deposited activities at KNK II were Mn-54 (fresh core) and after operation with failed fuel Cs-137, in cover gas areas together with Zn-65. Efficient experimental radionuclide traps for the removal of Mn-54, Zn-65 and Cs-137 from the primary coolant were tested successfully. The dose rates on primary pipes and components of KNK I and KNK II were lower by an order of magnitude compared to water-cooled reactors. This is in good agreement with experiences from LMFBR's in other countries. The resulting average yearly accumulated personal dose rate was 0.21 man-Sv at KNK, compared to 3.9 man-Sv at German light-water-cooled power reactors

  18. Radiochemical studies on amorphous zirconium phosphate

    Energy Technology Data Exchange (ETDEWEB)

    Dyer, A; Moores, G E [Salford Univ. (UK). Dept. of Chemistry and Applied Chemistry

    1981-01-01

    Amorphous zirconium phosphate (ZrP) is used in some hemodialysis machines for the regeneration of dialysate. Its function is to adsorb ammonium ions formed by the pretreatment of urea by urease. It also adsorbs Ca, Mg and K ions but leaches phosphate ions which are then removed (along with F/sup -/ ions) by a bed of hydrous zirconium oxide. The sodium form of ZrP is used although other forms have been suggested for use. The work reported here describes some preliminary radiochemical studies on the mechanism of release of phosphate ions and its possible relationship to sodium ion-exchange. /sup 32/P labelled material (HHZrP) was used for elution experiments with deionized water and buffer solutions having the pH's 4.2, 7.0 and 9.2. Buffer solutions used were as supplied by BDH. Elution was at four different temperatures in the range 293 to 363/sup 0/C. In the second series of experiments HHZrP was suspended in a NaCl solution labelled with /sup 22/Na. From this, /sup 22/Na labelled ZrP (NaHZrP) was prepared and eluted in the same way as the HHZrP. Results are given and discussed.

  19. Radiochemical measurement of mass transport in sodium

    International Nuclear Information System (INIS)

    Cooper, M.H.; Chiang, S.H.

    1976-01-01

    Mass transport processes in the sodium coolant of Liquid Metal Fast Breeder Reactors (LMFBRs) are significant in determining rates of corrosion and deposition of radioactive nuclides from the fuel cladding, deposition and cold trapping of fission products from defect or failed fuel, carbon and nitrogen redistribution in the containment materials, and removal of impurities by cold trapping or hot trapping. Mass transport between rotating, concentric cylinders in molten sodium has been investigated using a unique radiochemical method. Long-lived (33 year) cesium-137, dissolved in the sodium, decays radioactively emitting a beta to barium-137m, which decays with a short half-life (2.6 minutes) emitting a gamma. Cesium is weakly adsorbed and remains in solution, while the barium is strongly adsorbed on the stainless steel surfaces. Hence, by measuring the barium-137m activity on movable stainless steel surfaces, one can calculate the mass transport to that surface. Mass transfer coefficients in sodium measured by this method are in agreement with published heat transfer correlations when the effect of the volumetric mass source is taken into account. Hence, heat transfer correlations can be confidently utilized by analogy in estimating mass transfer in liquid-metal systems

  20. Radiochemical aging of an epoxy network; Vieillissement radiochimique d'un reseau epoxyde

    Energy Technology Data Exchange (ETDEWEB)

    Devanne, Th

    2003-05-01

    This thesis is to give a better understanding of the radiochemical aging of a thermoset resin under gamma irradiation. The conditions of aging are gamma irradiation under air with a dose rate of 2 kGy/h at 120 C. The requested lifetime is four years, it means a dose of 70 MGy. The first step of this work was the choice of a resistive epoxy resin. This choice was made thanks to the literature data. The high glass transition temperature and the high amount of aromatic groups were the main criteria of the final choice. After this choice, thermal and mechanical properties were followed under thermal and radiochemical aging: i) under thermal aging, after 600 hours at 220 C, the glass transition temperature remained unchanged. But, from a mechanical point of view, properties at break dramatically decreased. This embrittlement was assigned to a critical oxidized layer. The thickness of this layer was estimated about 30 {mu}m. ii) the same kind of embrittlement was observed under radiochemical aging. Moreover, it appeared a decrease of the glass transition temperature when increasing the dose of irradiation. This indicates that the main degradation mechanism is chain scission under anaerobic atmosphere. We, then, proposed a mechanistic model associated with a kinetic model to predict the evolution of the glass transition temperature depending on the irradiation conditions. Parameters of the kinetic model were determined by solid NMR and ESR experiments. Comparison between experimental and calculated values at 120 C is satisfactory, a global good agreement was found. (author)

  1. The use of robots for automation in the radiochemical laboratory

    International Nuclear Information System (INIS)

    Huddleston, J.

    1988-01-01

    The use of robotic systems for automated processes such as overnight operations, procedures involving radiation hazards in radiochemical laboratories is discussed. Particular reference is made to their use in analytical problems. Their flexibility is emphasised. (U.K.)

  2. A radiochemical assay for biotin in biological materials

    International Nuclear Information System (INIS)

    Hood, R.L.

    1975-01-01

    A radiochemical assay for biotin is described. The assay was sensitive to one nanogram and simple enough for routine biotin analyses. The assay yielded results which were comparable to those obtained from a microbiological assay using Lactobacillus plantarum. (author)

  3. The publication lapse of papers in Radiochemical and Radioanalytical Letters

    International Nuclear Information System (INIS)

    Braun, T.; Nagydiosi-Kocsis, Gy.

    1982-01-01

    The time needed for passing through journal editorial and publication processing has been examined for the papers published in Radiochemical and Radioanalytical Letters for the years 1969-1981. (author)

  4. Safety and Waste Management for SAM Radiochemical Methods

    Science.gov (United States)

    The General Safety and Waste Management page offers section-specific safety and waste management details for the radiochemical analytes included in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

  5. Investigation of Chemical and Radiochemical Fingerprints of Water Resources in Siwa Oasis, Western Desert, Egypt

    International Nuclear Information System (INIS)

    El-Sayed, S.A.; Allam, Kh.A.; Salama, M.H.; El Begawy, H.

    2017-01-01

    Water resources in Siwa oasis, Egypt; included the Nubian sandstone aquifer system (NSSAS), Tertiary carbonate aquifer system (TCAS) as well as springs and lakes. Existing chemical and radiochemical fingerprints of these resources in the central and western parts of the oasis were examined based on the analyses of 30 water samples collected in 2015. In each sample, the analyzed chemical and radioisotopic constituents were Cl"-, SO_4"2"- , CO_3"2"-, HCO"3 "-, Na"+, K"+, Ca"2"+ and Mg"2"+, Al, B, Ba, Cd, Co, Fe, Cu, Mn, Mo, Ni, Pb, Sr, V, Zn, Si and Cr, "2"2"6 Ra, "2"3"2Th and "4"0K. Other physical properties included ph and TDS were measured in the field. The chemical analysis was carried out following the ASTM methods, while the radiochemical measurements were done using a hyper pure germanium (HPGe) gamma ray spectrometry. Results of this work may be advantage ous to promote the hydrologic database in the oasis, where levels of the natural radioactivity in groundwater resources were established for the first time. Water resources were classified based on their contents of TDS into fresh water for the NSSAS, brackish to salty water for TCAS, brackish water for springs and brine water for lakes. The artesian water of the NSSAS and TCAS and water of the springs were alkaline, while the water of the lakes was acidic. Chemical characters of the ground water of the NSSAS reflected a little response to the processes of water-rock interactions, and the vice versa was observed for the groundwater of the TCAS. The ground water of the NSSAS was dominated by HCO"3"-Na genetic type characterizing the meteoric origin of water. The ground water of the TCAS was characterized by the presence of three genetic types of water (SO"4"-Na, Cl-Mg, and Cl-CA water), indicating the modification of the recharged water from the underlain NSSAS due to the effects of water sediment interactions and mixing with trapped ancient sea water. The chemical properties of spring water were, greatly

  6. Thermal Properties and Thermal Analysis:

    Science.gov (United States)

    Kasap, Safa; Tonchev, Dan

    The chapter provides a summary of the fundamental concepts that are needed to understand the heat capacity C P, thermal conductivity κ, and thermal expansion coefficient α L of materials. The C P, κ, and α of various classes of materials, namely, semiconductors, polymers, and glasses, are reviewed, and various typical characteristics are summarized. A key concept in crystalline solids is the Debye theory of the heat capacity, which has been widely used for many decades for calculating the C P of crystals. The thermal properties are interrelated through Grüneisen's theorem. Various useful empirical rules for calculating C P and κ have been used, some of which are summarized. Conventional differential scanning calorimetry (DSC) is a powerful and convenient thermal analysis technique that allows various important physical and chemical transformations, such as the glass transition, crystallization, oxidation, melting etc. to be studied. DSC can also be used to obtain information on the kinetics of the transformations, and some of these thermal analysis techniques are summarized. Temperature-modulated DSC, TMDSC, is a relatively recent innovation in which the sample temperature is ramped slowly and, at the same time, sinusoidally modulated. TMDSC has a number of distinct advantages compared with the conventional DSC since it measures the complex heat capacity. For example, the glass-transition temperature T g measured by TMDSC has almost no dependence on the thermal history, and corresponds to an almost step life change in C P. The new Tzero DSC has an additional thermocouple to calibrate better for thermal lags inherent in the DSC measurement, and allows more accurate thermal analysis.

  7. Procedural and developmental aspects of a multielement automatic radiochemical machine, applied to neutron irradiated biomedical samples

    International Nuclear Information System (INIS)

    Iyengar, G.V.

    1976-06-01

    This report is intended to serve as a practical guide, elaborately describing the working details and some developmental work connected with an automatic multielement radiochemical machine based on thermal neutron activation analysis using ion exchange and partition chromatography. Some of the practical aspects and personal observations after much experience with this versatile multielement method, applied to investigate the elemental composition of different biomedical matrices, are summarized. Standard reference materials are analyzed, and the data are presented with a set of gamma-spectra obtained before and after chemical separation into convenient groups suitable for gamma spectroscopy. The samples analyzed included various human and animal tissues, body fluids, IAEA biological standard reference materials, and samples from the WHO/IAEA project on 'Trace elements in relation to cardiovascular diseases'. Simplified modifications of the radiochemical processing, suitable for fast and routine analysis of clinical samples have also been discussed. (orig.) [de

  8. Ultratrace determination of platinum in biological materials via neutron activation and radiochemical separation

    International Nuclear Information System (INIS)

    Zeisler, R.; Greenberg, R.R.

    1982-01-01

    A neutron activation analysis scheme based upon a radiochemical separation of the activation products has been developed. The method utilizes the inherent sensitivity of the activation reaction 198 Pt(n,ν) 199 Pt and counting of the daughter nuclide 199 Au. This nuclide is radiochemically separated from interfering activities by homogeneous precipitation as elemental gold. The remaining interference of the secondary reaction 197 Au(n,ν) 198 Au(n,ν) 199 Au from gold in the samples is quantitatively assessed and corrected. During this process accurate gold concentrations in the samples are obtained at ultratrace levels. The analysis scheme is applied to gold and platinum determinations in biological Standard Reference Materials and human liver specimens. Gold and platinum are determined at concentrations of 5x10 - 11 g/g, and at higher levels. (author)

  9. Proceedings of the Tripartite Seminar on Nuclear Material Accounting and Control at Radiochemical Plants; Trudy trekhstoronnego seminara Uchet i kontrol' yadernykh materialov na radiokhimicheskikh ustanovkakh

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    The problems of creation and operation of nuclear materials (NM) control and accounting systems and their components at radiochemical plants were discussed in seminar during November 2-6 of 1998. There were 63 Russian and 25 foreign participants in seminar. The seminar programme includes following sessions and articles: the aspects of State NM control and accountancy; NM control and accounting in radiochemical plants and at separate stages of reprocessing of spent nuclear fuel and irradiated fuel elements of commercial reactors; NM control and accountancy in storage facilities of radiochemical plants; NM control and accounting computerization, material balance assessment, preparation of reports; qualitative and quantitative measurements in NM control and accounting at radiochemical plants destructive analysis techniques.

  10. Radiochemical studies on environmental radioactivity in Sudan

    Energy Technology Data Exchange (ETDEWEB)

    Sam, Adam Khatir [Sudan Atomic Energy Commission, Khartoum (Sudan)

    1998-09-01

    Measurements of uranium and thorium isotopes, {sup 226} Ra, {sup 210} Po, {sup 228} Ra, {sup 40} K and fallout radionuclide {sup 137} Cs in soil samples collected from different districts in Sudan, rock phosphate samples collected from the uro and kurun rock phosphate deposits in the eastern part of the Nuba mountains in Western Sudan, and surface marine sediments and marine organisms collected from the sudanese coastal waters of the Red Sea have been made using a high resolution gamma-spectrometry, radiochemical separation and {alpha} spectrometry. The external exposure due to {gamma} radiation from the ground has been calculated. The average exposure was found to be 45.4 {+-} 21.3 nGy/h, corresponding to the annual dose equivalent of 278 {mu}Sv/y. With the exception of some areas, the calculated exposure falls within the global wide range of outdoor radiation exposure given in the UNSCEAR publications. The nation-wide average concentrations of {sup 226} Ra, {sup 238} U, {sup 232} Th, {sup 40} K and {sup 137} Cs determined were 31.6 {+-} 27, 20.1 {+-} 16.4, 19.1 {+-} 8.1, 280.3 {+-} 137.6 and 4.1 {+-} 4.3 Bq/Kg, respectively. This shows that there is little contamination due to fallout radioactivity at survey sites. The exchangeable radium fraction constitutes 19-24% of the total radium content. The data show that {sup 238} U and its decay products are the principal contributors of radioactivity in both phosphate deposits at Uro and Kurun. The equivalent mass concentrations of uranium in the Uro rock phosphate fall within the range that could be economically recovered as the by-product of fertilizer industry. The mean activity concentrations weighted by average agricultural consumption of 300 kg/ha of untreated ground rock fertilizer resulted in an annual distribution of 120.63 Bq Ra/m{sup 2} with Uro rock and 12.97, 0.21 and 4.24 Bq/m{sup 2} respectively, with Kurun rock fertilizer. The external radiation exposure over agricultural areas was estimated 23.41 x 10

  11. Radiochemical studies on environmental radioactivity in Sudan

    International Nuclear Information System (INIS)

    Sam, Adam Khatir

    1998-01-01

    Measurements of uranium and thorium isotopes, 226 Ra, 210 Po, 228 Ra, 40 K and fallout radionuclide 137 Cs in soil samples collected from different districts in Sudan, rock phosphate samples collected from the uro and kurun rock phosphate deposits in the eastern part of the Nuba mountains in Western Sudan, and surface marine sediments and marine organisms collected from the sudanese coastal waters of the Red Sea have been made using a high resolution gamma-spectrometry, radiochemical separation and α spectrometry. The external exposure due to γ radiation from the ground has been calculated. The average exposure was found to be 45.4 ± 21.3 nGy/h, corresponding to the annual dose equivalent of 278 μSv/y. With the exception of some areas, the calculated exposure falls within the global wide range of outdoor radiation exposure given in the UNSCEAR publications. The nation-wide average concentrations of 226 Ra, 238 U, 232 Th, 40 K and 137 Cs determined were 31.6 ± 27, 20.1 ± 16.4, 19.1 ± 8.1, 280.3 ± 137.6 and 4.1 ± 4.3 Bq/Kg, respectively. This shows that there is little contamination due to fallout radioactivity at survey sites. The exchangeable radium fraction constitutes 19-24% of the total radium content. The data show that 238 U and its decay products are the principal contributors of radioactivity in both phosphate deposits at Uro and Kurun. The equivalent mass concentrations of uranium in the Uro rock phosphate fall within the range that could be economically recovered as the by-product of fertilizer industry. The mean activity concentrations weighted by average agricultural consumption of 300 kg/ha of untreated ground rock fertilizer resulted in an annual distribution of 120.63 Bq Ra/m 2 with Uro rock and 12.97, 0.21 and 4.24 Bq/m 2 respectively, with Kurun rock fertilizer. The external radiation exposure over agricultural areas was estimated 23.41 x 10 -9 Gy/h and 2.59 x 10 -9 Gy/h at 1 m above ground level for Uro and Kurun rock phosphate fertilizers

  12. Radiochemical methods to enhance efficiency of α-spectral measurements

    International Nuclear Information System (INIS)

    Silkina, G.P.; Artem'ev, O.I.

    2001-01-01

    The paper describes possible ways to improve a plutonium radiochemical separation technique developed in the Khlopin Radium Institute and modify it to account for the site-specific features of samples from the former Semipalatinsk test site (STS) and enhance the alpha spectrometry efficiency.The paper describes possible ways to improve a plutonium radiochemical separation technique developed in the Khlopin Radium Institute and modify it to account for the site-specific features of samples from the former Semipalatinsk test site (STS) and enhance the alpha spectrometry efficiency. (author)

  13. ZZ HATCHES-18, Database for radiochemical modelling

    International Nuclear Information System (INIS)

    Heath, T.G.

    2008-01-01

    1 - Description of program or function: HATCHES is a referenced, quality assured, thermodynamic database, developed by Serco Assurance for Nirex. Although originally compiled for use in radiochemical modelling work, HATCHES also includes data suitable for many other applications e.g. toxic waste disposal, effluent treatment and chemical processing. It is used in conjunction with chemical and geochemical computer programs, to simulate a wide variety of reactions in aqueous environments. The database includes thermodynamic data (the log formation constant and the enthalpy of formation for the chemical species) for the actinides, fission products and decay products. The datasets for Ni, Tc, U, Np, Pu and Am are based on the NEA reviews of the chemical thermodynamics of these elements. The data sets for these elements with oxalate, citrate and EDTA are based on the NEA-selected values. For iso-saccharinic acid, additional data (non-selected values) have been included from the NEA review as well as data derived from other sources. HATCHES also includes data for many toxic metals and for elements commonly found in groundwaters or geological materials. HARPHRQ operates by reference to the PHREEQE master species list. Thus the thermodynamic information supplied is: a) the log equilibrium constant for the formation reaction of the requested species from the PHREEQE master species for the corresponding elements; b) the enthalpy of reaction for the formation reaction of the requested species from the PHREEQE master species for the corresponding elements. This version of HATCHES has been updated since the previous release to provide consistency with the selected data from two recent publications in the OECD Nuclear Energy Agency series on chemical thermodynamics: Chemical Thermodynamics Series Volume 7 (2005): Chemical Thermodynamics of Selenium by Aeke Olin (Chairman), Bengt Nolaeng, Lars-Olof Oehman, Evgeniy Osadchii and Erik Rosen and Chemical Thermodynamics Series Volume 8

  14. Instrumentation for chemical and radiochemical monitoring in nuclear power plants

    International Nuclear Information System (INIS)

    Nordmann, F.; Ballard, G.

    2009-01-01

    This article details the instrumentation implemented in French nuclear power plants for the monitoring of chemical and radiochemical effluents with the aim of limiting their environmental impact. It describes the controls performed with chemical automata for the search for drifts, anomalies or pollution in a given circuit. The operation principles of the different types of chemical automata are explained as well as the manual controls performed on samples manually collected. Content: 1 - general considerations; 2 - objectives of the chemical monitoring: usefulness of continuous monitoring with automata, transmission to control rooms and related actions, redundancy of automata; 3 - instrumentation and explanations for the main circuits: principle of chemical automata monitoring, instrumentation of the main primary circuit, instrumentation of the main secondary circuit, instrumentation of the tertiary circuit, preparation of water makeup (demineralized water), other loops, instrumentation for effluents and environment monitoring, measurement principles of chemical automata, control and maintenance of chemical automata; 4 - manual controls after sampling; 5 - radiochemical monitoring: automatized radiochemical measurements, manual radiochemical measurements; 6 - conclusion

  15. Radio-chemical applications of functionalized membranes

    International Nuclear Information System (INIS)

    Pandey, Ashok K.

    2011-01-01

    Functionalized polymer membranes have many potential applications as they are task specific. We have developed many functionalized membranes like polymer inclusion membranes, pore-filled membranes and nano-membranes. Radiotracers and other methods have been used to understand the diffusional-transport properties of the Nafion-117 membrane as well as home-made membranes. These membranes have been used to develop novel analytical and separation methods for toxic metal ions and radionuclides. In this talk, an overview of our work on functionalized membrane is presented. (author)

  16. Determination of trace elements in bottled water in Greece by instrumental and radiochemical neutron activation analyses

    International Nuclear Information System (INIS)

    Soupioni, M.J.; Symeopoulos, B.D.; Papaefthymiou, H.V.

    2006-01-01

    Four different bottled water brands sold in Greece in the winter of 2001-2002 were analyzed for a wide range of chemical elements, using neutron activation analysis (NAA). The elements Na and Br were determined instrumentally (INAA), whereas the other metals and trace elements radiochemically (RNAA). The results indicated that the mean level of all the elements determined in the samples were well within the European Union (EU) directive on drinking water and accomplish the drinking water standards of the World Health Organisation (WHO) as well as of the Food and Drug Administration (FDA). (author)

  17. Integral method of treatment of experimental data from radiochemical solar neutrino detectors

    International Nuclear Information System (INIS)

    Gavrin, V.N.; Kopylov, A.V.; Streltsov, A.V.

    1985-01-01

    An analysis is made of the statistical errors in solar neutrino detection by radiochemical detectors at different times of exposure. It is shown that short exposures (tau/sub e/ = one-half to one half-life) give minimal one-year error. The possibility is considered of the detection of the solar neutrino flux variation due to annual changes of the Earth-Sun distance. The integral method of treatment of the experimental data is described. Results are given of the statistical treatment of computer simulated data

  18. Quality Control Guidelines for SAM Radiochemical Methods

    Science.gov (United States)

    Learn more about quality control guidelines and recommendations for the analysis of samples using the radiochemistry methods listed in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

  19. Preparation, radiochemical purity control and stability of 99mTc-mertiatide (Mag-3)

    International Nuclear Information System (INIS)

    Van Hemert, F.J.; Schimmel, K.J.M.; Van Eck-Smit, B.L.F.; Van Lenthe, H.

    2005-01-01

    Scintigraphic image analysis of 99m Tc-mertiatide (Mag-3, mercaptoacetyltriglycine) clearance provides the determination of the blood flow, the tubular transit time and the excretion as well from both kidneys. Radiopharmaceutical routine recommends a radiochemical purity control before administration of the product to a patient. The main objective of this study is to develop a Mag-3 labeling procedure that fits better than the previous one in our daily routine production of radiopharmaceuticals. Increasing proportions of 99m Tc-Mag-3 were measured during the heating and cooling steps of the Mag-3 labeling procedure. High performance liquid chromatography (HPLC) analysis was used to confirm the results of a rapid radiochemical quality control assay on standard instant thin-layer chromatography-silica gel (ITLC-SG) paper. The reconstitution time takes 20-25 minutes from the harvest of pertechnetate to a ready-for-use calibrated patient syringe. The HPLC profile of 99m Tc-Mag-3 including its minor impurities remains unchanged for 24-48 hours after reconstitution. The application of a programmable Peltier-directed device for heating/cooling provides a better control of the temperature course. The procedure proposed fully meets the labeling criteria recommended by the supplier and can be performed with a minimum of attention within a time-span that we formerly needed for solely the radiochemical purity control assay. Moreover, 99m Tc-Mag-3 prepared in this way seems to be considerably more stable than mentioned in the manufacturer's instructions. (author)

  20. Radiochemical methods. Analytical chemistry by open learning

    Energy Technology Data Exchange (ETDEWEB)

    Geary, W.J.; James, A.M. (ed.)

    1986-01-01

    This book presents the analytical uses of radioactive isotopes within the context of radiochemistry as a whole. It is designed for scientists with relatively little background knowledge of the subject. Thus the initial emphasis is on developing the basic concepts of radioactive decay, particularly as they affect the potential usage of radioisotopes. Discussion of the properties of various types of radiation, and of factors such as half-life, is related to practical considerations such as counting and preparation methods, and handling/disposal problems. Practical aspects are then considered in more detail, and the various radioanalytical methods are outlined with particular reference to their applicability. The approach is 'user friendly' and the use of self assessment questions allows the reader to test his/her understanding of individual sections easily. For those who wish to develop their knowledge further, a reading list is provided.

  1. Miniaturized chromatographic radiochemical procedure for 131I - MIBG

    International Nuclear Information System (INIS)

    Barboza, M.F. de; Pereira, N.S. de; Colturato, M.T.; Silva, C.P.G. da.

    1989-12-01

    Different solvents were used in paper chromatographic methods to obtain the best system in routine radiochemical control for 131 I-MIBG produced at IPEN-CNEN/SP. The dates were compared with those obtained with eletrophoresis method in buffer acetate, pH=4.5, 350V, during 40 minutes. The stability of the labeled compound store under 4 0 C was studied during 15 days. Miniaturized chromatographic procedures were established using Whatman 3MM (8x1cm) and n-butanol-:acetic acid: water (S:2:1) as a solvent. the Rf values were: 0.3 (I - ) and 1.0 (MIBG). The radiochemical purity was 99.3 and 99.2% (first day) obtained with eletrophoresis and miniaturized chromatographic procedures, respectively and, 84.7% after 15 days of its preparation. It is a rapid, practical and reproductive method. (author) [pt

  2. Rapid radiochemical separation of zirconium-95 and niobium-95

    International Nuclear Information System (INIS)

    Downey, D.M.; McLaughlin, C.L.

    1983-01-01

    A rapid method for the quantitative separation of 95 Zr and 95 Nb has been developed. The method is based on the ion flotation of cationic zirconium complex ions with sodium lauryl sulfate (NaLS) from niobium which is masked with hydrogen peroxide. The separation was applied to mixtures of 95 Zr and 95 Nb initially in oxalic acid solution and quantitative recoveries of the radiochemically pure radioisotopes were obtained. (orig.)

  3. Rapid radiochemical separation of zirconium-95 and niobium-95

    Energy Technology Data Exchange (ETDEWEB)

    Downey, D.M.; McLaughlin, C.L.

    1983-01-01

    A rapid method for the quantitative separation of /sup 95/Zr and /sup 95/Nb has been developed. The method is based on the ion flotation of cationic zirconium complex ions with sodium lauryl sulfate (NaLS) from niobium which is masked with hydrogen peroxide. The separation was applied to mixtures of /sup 95/Zr and /sup 95/Nb initially in oxalic acid solution and quantitative recoveries of the radiochemically pure radioisotopes were obtained.

  4. Radiochemical regularities of migration mobility of Chernobyl' discharge radionuclides

    International Nuclear Information System (INIS)

    Skorobogat'ko, E.P.; Rybalko, S.I.

    1992-01-01

    Data on the radionuclude (RN) migration in environment later the Chernobyl' accident are generalized. Introduction of fallout of the radioactive discharge into environment causes necessity to account and to study different factors of geochemical and physicochemical character determining further RN behaviour in the medium. For a well-founded forecast of the behaviour it is necessity to use a complex of radiochemical and physicochemical research, lying in the base of radiation monitoring of environment. 1 refs

  5. Electrochemistry as a basis for radiochemical generator systems

    International Nuclear Information System (INIS)

    Bentley, G.E.; Steinkruger, F.J.; Wanek, P.M.

    1984-01-01

    Ion exchange and solvent extraction techniques have been used extensively as the basis for radiochemical generators exploiting the differences in absorption behavior between the parent nuclide and its useful daughter nuclide. Many parent/daughter pairs of nuclides have sufficiently different polarographic half wave potentials so that their electrochemical behavior may be exploited for rapid separation of the daughter from the parent with minimal contamination of the product with the parent isotope

  6. Present status of radiochemical double β decay study (238U)

    International Nuclear Information System (INIS)

    Chevallier, A.; Chevallier, J.; Escoubes, B.; Schulz, N.; Sens, J.C.; Madic, C.; Maillard, C.

    1989-01-01

    The reasons for which the 238 U is a suitable candidate for the β β decay processes are explained. The strategy adopted for the radiochemical separation of the 234 U is given. A chemical system based on extraction chromatography is applied. The Pu IV breakthrough curves obtained at 40C during 238 Pu/ 238 U separation cycles are presented. A short description of the chromatographic facility is given. The solution adopted for the low background α spectrometer is explained

  7. Analysis of aceismatic properties of switch boards

    International Nuclear Information System (INIS)

    Tabuchi, Yoji; Nishikawa, Atsushi

    1986-01-01

    Recently, in order to limit the disaster at the time of earthquakes to the minimum, the aseismatic properties of electric facilities have been regarded as important. By the development and spread of CAE simulation and experimental modal analysis, aseismatic analysis has become feasible also in design section. Taking an example of the switch boards of rigid construction, which have been used mainly for nuclear power plants, the analysis of the aseismatic properties is explained. In the switch boards of rigid construction, the probability of causing resonance behavior due to earthquakes is decreased by making the structure rigid, thus the aseismatic properties are heightened. In the switch boards of rigid construction, the primary natural frequency is heightened usually to above 20 Hz considering earthquake movement and the response of buildings (in the range from 0.5 to 10 Hz). Since the switch boards of rigid construction can be treated as a rigid body in the examination of structural strength, generally static analysis is carried out. The dimensions and weight tend to be large for increasing the rigidity. In most cases, standard equipment can be adopted if the fixing is made strong. The modal analysis of the natural vibration, static stress analysis and time history response analysis were carried out by finite element method. Also the vibration test on a large vibration table was made. The results are reported. (Kako, I.)

  8. Chemical and radiochemical specifications - PWR power plants

    International Nuclear Information System (INIS)

    Stutzmann, A.

    1997-01-01

    Published by EDF this document gives the chemical specifications of the PWR (Pressurized Water Reactor) nuclear power plants. Among the chemical parameters, some have to be respected for the safety. These parameters are listed in the STE (Technical Specifications of Exploitation). The values to respect, the analysis frequencies and the time states of possible drops are noticed in this document with the motion STE under the concerned parameter. (A.L.B.)

  9. Radiochemical determination of methylmercury in fish

    International Nuclear Information System (INIS)

    Stary, J.; Prasilova, J.; Kratzer, K.

    1978-01-01

    A selective and sensitive method for the determination of methylmercury has been developed. This method is based on the extraction of methylmercury chloride into benzene and on the subsequent exchange reaction with potassium iodide-131 solution. The previously developed method has been adapted for the analysis of fish. The content of methylmercury in frozen cod (Tenegra chalcograma), frozen marena (Coregonus lavaretus) and in fresh carp (Cyprinus carpio) has been compared with the total content of mercury determined by cold vapor spectrometry. (T.I.)

  10. Defense Threat Reduction Agency Radiochemical Needs

    Science.gov (United States)

    Walsh, Michael A. R.; Velazquez, Daniel L.

    2009-08-01

    The United States Government (USG) first developed nuclear forensics-related capabilities to analyze radiological and nuclear materials, including underground nuclear test debris and interdicted materials. Nuclear forensics is not a new mission for Department of Defense (DoD). The department's existing nuclear forensics capability is the result of programs that span six (6) decades and includes activities to assess foreign nuclear weapons testing activities, monitor and verify nuclear arms control treaties, and to support intelligence and law enforcement activities. Today, nuclear forensics must support not only weapons programs and nuclear smuggling incidents, but also the scientific analysis and subsequent attribution of terrorists' use of radiological or nuclear materials/devices. Nuclear forensics can help divulge the source of origin of nuclear materials, the type of design for an interdicted or detonated device, as well as the pathway of the materials or device to the incident. To accomplish this mission, the USG will need trained radiochemists and nuclear scientists to fill new positions and replace the retiring staff.

  11. Defense Threat Reduction Agency Radiochemical Needs

    International Nuclear Information System (INIS)

    Walsh, Michael A. R.; Velazquez, Daniel L.

    2009-01-01

    The United States Government (USG) first developed nuclear forensics-related capabilities to analyze radiological and nuclear materials, including underground nuclear test debris and interdicted materials. Nuclear forensics is not a new mission for Department of Defense (DoD). The department's existing nuclear forensics capability is the result of programs that span six (6) decades and includes activities to assess foreign nuclear weapons testing activities, monitor and verify nuclear arms control treaties, and to support intelligence and law enforcement activities. Today, nuclear forensics must support not only weapons programs and nuclear smuggling incidents, but also the scientific analysis and subsequent attribution of terrorists' use of radiological or nuclear materials/devices. Nuclear forensics can help divulge the source of origin of nuclear materials, the type of design for an interdicted or detonated device, as well as the pathway of the materials or device to the incident. To accomplish this mission, the USG will need trained radiochemists and nuclear scientists to fill new positions and replace the retiring staff.

  12. RAPID AUTOMATED RADIOCHEMICAL ANALYZER FOR DETERMINATION OF TARGETED RADIONUCLIDES IN NUCLEAR PROCESS STREAMS

    International Nuclear Information System (INIS)

    O'Hara, Matthew J.; Durst, Philip C.; Grate, Jay W.; Egorov, Oleg; Devol, Timothy A.

    2008-01-01

    Some industrial process-scale plants require the monitoring of specific radionuclides as an indication of the composition of their feed streams or as indicators of plant performance. In this process environment, radiochemical measurements must be fast, accurate, and reliable. Manual sampling, sample preparation, and analysis of process fluids are highly precise and accurate, but tend to be expensive and slow. Scientists at Pacific Northwest National Laboratory (PNNL) have assembled and characterized a fully automated prototype Process Monitor instrument which was originally designed to rapidly measure Tc-99 in the effluent streams of the Waste Treatment Plant at Hanford, WA. The system is capable of a variety of tasks: extraction of a precise volume of sample, sample digestion/analyte redox adjustment, column-based chemical separations, flow-through radiochemical detection and data analysis/reporting. The system is compact, its components are fluidically inter-linked, and analytical results can be immediately calculated and electronically reported. It is capable of performing a complete analytical cycle in less than 15 minutes. The system is highly modular and can be adapted to a variety of sample types and analytical requirements. It exemplifies how automation could be integrated into reprocessing facilities to support international nuclear safeguards needs

  13. Validation of the FDG (18F) radiochemical purity assay by thin layer chromatography

    International Nuclear Information System (INIS)

    Leao, R.L.C.; Oliveira, M.L.; Nascimento, J.E.; Nascimento, N.C.E.S.

    2013-01-01

    All methodologies utilized in radiopharmaceutical industry should be validated in order to prove that they meet the requirements of analytical applications, ensuring the reliability of the results. At a radiopharmaceutical industry there is one challenge aspect: sometimes it is not possible use a stable standard to perform the validation analysis. In order to overcome this difficulty, the objective of this study was to suggest a validation protocol for these methodologies, based on the recommendations of RE n° 899/Agencia Nacional de Vigilancia Sanitaria (ANVISA), and prove its efficiency, performing the radiochemical purity validation test of FDG (18F), by TLC. To obtain the calibration curve, we suggested that the theoretical activity values should be determined using a dose calibrator, simultaneously of each analysis performed by TLC, for 5 hours. The method was linear (R 2 of 0.996), precise (CV% <5%) and accurate (96.85% < accuracy < 102.56%). In relation to the robustness test, our experiments evaluated the influence of the distance travelled by mobile phase, variations at mobile phase concentration and type of chromatographic plate (silica gel on glass or aluminium plates). The detection and quantification limits were determined (321.9 and 1065.6 kBq, respectively). As expected, this methodology was nonspecific, showing a slight spot corresponding to the FDM. The proposed protocol was efficient and the methodology tested was effective to determine the radiochemical purity of FDG (18F), in accordance to the limits recommended by ANVISA. (author)

  14. Structure Analysis and Properties of Unleaded Brasses

    Directory of Open Access Journals (Sweden)

    Rzadkosz S.

    2015-04-01

    Full Text Available The analysis of brasses regarding their microstructure, mechanical properties and ecological characteristics has been presented. The influence of characteristic alloying elements contained in the brasses and the possibilities of replacing them with other elements have been assessed. The paper contains the results of studies on the influence of chosen additional elements shaping the structure and properties of unleaded alloys based on Cu-Zn system as the matrix. The research aimed at determining the mechanism and the intensity of influence of such additives as tellurium and bismuth. The microstructures were investigated with the help of light microscopy and scanning electron microscopy with X-ray microanalysis (SEM-EDS for determining significant changes of the properties.

  15. Labeling of thymidine analog with an organometallic complex of technetium-99m for diagnostic of cancer: radiochemical and biological evaluation

    International Nuclear Information System (INIS)

    Santos, Rodrigo Luis Silva Ribeiro

    2007-01-01

    Thymidine analogs have been labeled with different radioisotopes due to their potential in monitoring the uncontrollable cell proliferation. Considering that the radioisotopes technetium-99m still keep a privileged position as a marker due to its chemical and nuclear properties, this dissertation was constituted by the developed of a new technique of labeling of thymidine analog with 99m Tc, by means of the organometallic complex. The aims of this research were: synthesis of the organometallic complex technetium-99m-carbonyl, thymidine labeling with this precursor, evaluation of stability, and radiochemical e biological evaluation with healthy and tumor-bearing animals. The preparation of the organometallic precursor, using the CO gas, was easily achieved, as well as the labeling of thymidine with this precursor, resulting itself a radiochemical pureness of ≥ 97% and ≥ 94%, respectively. Chromatography systems with good levels of trustworthiness were used, ensuring the qualification and quantification of the radiochemical samples. The result of in vitro testing of lipophilicity disclosed that the radiolabeled complex is hydrophilic, with a partition coefficient (log P) of -1.48. The precursor complex and the radiolabeled have good radiochemical stability up to 6 h in room temperature. The cysteine and histidine challenge indicated losses between 8 and 1 1 % for concentrations until 300 mM. The biodistribution assay in healthy mice revealed rapid blood clearance and low uptake by general organs with renal and hepatobiliary excretion. The tumor concentration was low with values of 0.28 and 0.18 %ID/g for lung and breast cancer, respectively. The results imply more studies in other tumor models or the modification of the structure of the organic molecule that act like ligand. (author)

  16. Hydrologic conditions and distribution of selected radiochemical and chemical constituents in water, Snake River Plain aquifer, Idaho National Engineering Laboratory, Idaho, 1992 through 1995

    International Nuclear Information System (INIS)

    Bartholomay, R.C.; Tucker, B.J.; Ackerman, D.J.; Liszewski, M.J.

    1997-04-01

    Radiochemical and chemical wastewater discharged since 1952 to infiltration ponds and disposal wells at the Idaho National Engineering Laboratory (INEL) has affected water quality in the Snake River Plain aquifer. The US Geological Survey, in cooperation with the US Department of Energy, maintains a monitoring network at the INEL to determine hydrologic trends and to delineate the movement of radiochemical and chemical wastes in the aquifer. This report presents an analysis of water-level and water-quality data collected from the Snake River Plain aquifer during 1992--95

  17. A radiochemical NAA method for the determination of tin, barium, copper and antimony- role of tin as an indicator for gun shot residues

    International Nuclear Information System (INIS)

    Chattopadhyay, N.; Basu, A.K.; Tripathi, A.B.R.; Rao, M.S.; Anil Kumar, S.; Parthasarathy, R.; Mathur, P.K.

    1998-01-01

    Metallic tin being present as impurity and hardening agent of lead bullet/shot, is expected to play an important role in forensic ballistics in matching of bullet lead specimens for establishment of commonness of origin and also as an additional parameter for characterisation of Gun Shot Residue (GSR). 121 Sn is a suitable radioisotope for quantification of the element at ppm level if it is separated in highest radiochemical purity. A sequential Radiochemical Neutron Activation Analysis (RNAA) procedure for its simultaneous determination along with trace levels of Ba, Cu and Sb has been developed and its applications in forensic science are described. (author)

  18. Radiochemical determination of strontium-90 and cesium-137 in waters of the Pacific Ocean and its neighboring seas

    International Nuclear Information System (INIS)

    Borisenko, G.S.; Kandinskii, P.A.; Gedeonov, L.I.; Ivanova, L.M.; Petrov, A.A.

    1987-01-01

    Depending on the salinity of the water, two versions of strontium-90 and cesium-137 concentration from water samples are presented. Cesium-137 was concentrated by precipitating sparingly soluble mixed hexacyanoferrates (II), and strontium-90 by precipitating carbonates together with calcium. A scheme has been given for radiochemical analysis of the concentrates. Strontium-90 and cesium-137 contents in the waters of the Pacific Ocean and its neighboring seas have been determined by the radiochemical method described. The levels of radionuclide content in the water and atmospheric precipitations have been shown to be inter-related. Strontium-90 and cesium-137 contents in the surface water of the northwestern Pacific were found to be much lower in 1980 than in the early seventies. The area of technogenic radioactive pollution was found to persist in the region of the Columbia mouth into the Pacific Ocean

  19. Cyclotron production, radiochemical separation and quality control of platinum radiotracers for toxicological studies

    International Nuclear Information System (INIS)

    Bonardi, M.; Birattari, C.; Groppi, F.; Arginelli, D.; Gini, L.; Gallorini, M.

    1998-01-01

    The increasing concentration of Pt, Pd and Rh in the environment is mainly due to the release of these elements from the catalytic converters of the motorvehicles. This situation makes it necessary to carry out metallotoxicological experiments on both cell cultures and laboratory animals, in order to assess their impact on living organisms after a Long Term and Low Level Exposure (LLE). Both nuclear reactions nat Ir(p,xn) and nat Os(α,xn) were investigated in the energy range up to 45 MeV for protons and 38 MeV for alpha-particles, in order to optimize the irradiation parameters for the production of 188,189,191 Pt. Several sets of thin- and thick-target excitation functions were determined experimentally by cyclotron irradiation at both Milano and Ispra cyclotrons. This paper reports the irradiation parameters studied and adopted and two radiochemical procedures for the separation of radio-Pt from an Os target, as well as from ruthenium, iridium and gold impurities. These procedures were used to obtain very high specific activity Pt radionuclides in No Carrier Added (NCA) form. Radionuclidic, radiochemical and chemical purity measurements were carried out by the use of several techniques like γ-spectrometry, ion-exchange radio-chromatography, atomic absorption spectrometry and neutron activation analysis. (author)

  20. Radiochemical guidelines and process specifications for reactor shutdown: the EDF strategy

    International Nuclear Information System (INIS)

    Mole, D.; Wintergerst, M.; Meylogan, Th.; Rocher, A.; Sagot, M.J.; Bonelli, V.; Bonnefon, J.; Dupont, B.

    2012-09-01

    Changes to French nuclear regulations made in June 2006 [1.] have made it necessary for EDF to modify its ruling principles. These modifications required the restructuring of radiochemical guidelines to better reflect their impact on nuclear safety, the environment and radioprotection. In accordance with these aims, a new authoritative document has been produced. This ruling document identifies all parameters with a potential impact on nuclear safety, radiological releases to the environment and personnel dose rates. These diagnostic and control parameters have been identified for a reactor in production and for a reactor during shutdown. For parameters related to a reactor in production, some indicators are used to evaluate impacts on availability, radioprotection and the environment during shutdown and on outage and to anticipate mitigation ways. On the other side, several parameters related to the stages of shutdown were also directly evaluated in order to minimize the impacts. This paper describes the EDF methodology used to establish operational documents: radiochemical guidelines and process specifications, and includes the following: - description of monitored parameters and their associated areas of risk; - justification of target values, frequencies of inspection and the required actions for the monitored parameters. The sizing methodology is based on theoretical studies and on EDF operational experience analysis. By implementing in the operational and technical specifications requirements linked to nuclear safety, radioprotection and environment respect, EDF will benefit from an improved compromise between these areas as well as an increased focus. (authors)

  1. Use of species of the genus Tillandsia as bio monitors of the atmospheric contamination using radiochemical analysis; Utilizacion de especies del genero Tillandsia como biomonitores de la contaminacion atmosferica utilizando tecnicas radioquimicas

    Energy Technology Data Exchange (ETDEWEB)

    Alonso, M T; Wilkinson, M V; Marques, R [Buenos Aires Univ. (Argentina). Dept. de Quimica Inorganica, Analitica y Quimica Fisica; Castro, M A [Buenos Aires Univ. (Argentina). Dept. de Ciencias Biologicas; Di Risio, C [Buenos Aires Univ. (Argentina)

    2000-07-01

    The use of epiphytic plants as bio monitors of environmental pollution is studied in this paper. Species of the genus Tillandsia were selected to make studies, on the one hand, using the Neutron Activation Analysis in order to make multielemental analysis to detect possible pollutants. Optimum conditions of preparation and treatment of the samples were determined to verify the elemental uptake in plant tissues. On the other hand, some studies were carried out to investigate the uptake (translocation) of possible pollutants by using radiotracers. With this aim, a conditioned area (glove box) has been developed in order to reproduce the environment of these plants. This glove box was used for studies with radiotracers. The results of the experiments with Hg as radiotracer are presented in this paper. (author)

  2. Self-decomposition of radiochemicals. Principles, control, observations and effects

    International Nuclear Information System (INIS)

    Evans, E.A.

    1976-01-01

    The aim of the booklet is to remind the established user of radiochemicals of the problems of self-decomposition and to inform those investigators who are new to the applications of radiotracers. The section headings are: introduction; radionuclides; mechanisms of decomposition; effects of temperature; control of decomposition; observations of self-decomposition (sections for compounds labelled with (a) carbon-14, (b) tritium, (c) phosphorus-32, (d) sulphur-35, (e) gamma- or X-ray emitting radionuclides, decomposition of labelled macromolecules); effects of impurities in radiotracer investigations; stability of labelled compounds during radiotracer studies. (U.K.)

  3. Low temperature radio-chemical energy conversion processes

    International Nuclear Information System (INIS)

    Gomberg, H.J.

    1986-01-01

    This patent describes a radio-chemical method of converting radiated energy into chemical energy form comprising the steps of: (a) establishing a starting chemical compound in the liquid phase that chemically reacts endothermically to radiation and heat energy to produce a gaseous and a solid constituent of the compound, (b) irradiating the compound in its liquid phase free of solvents to chemically release therefrom in response to the radiation the gaseous and solid constituents, (c) physically separating the solid and gaseous phase constituents from the liquid, and (d) chemically processing the constituents to recover therefrom energy stored therein by the irradiation step (b)

  4. Rapid, radiochemical-ligand binding assay for methotrexate

    International Nuclear Information System (INIS)

    Caston, J.D.

    1976-01-01

    A radiochemical ligand binding assay for methotrexate is provided. A binder factor comprising a partially purified dihydrofolic acid reductase preparation is employed. The binder factor is conveniently prepared by homogenizing a factor containing animal organ such as liver, and extracting with isotonic saline and ammonium sulfate. A binder cofactor, NADPH 2 , is also employed in the binding reaction. The procedure contemplates both direct and sequential assay techniques, and it is not interfered with by vast excesses of many natural folate derivatives. 12 claims, 6 drawing figures

  5. Radiochemical schemes of obtaining 89Sr and 90Y radionuclides

    International Nuclear Information System (INIS)

    Usarov, Z. O.

    2010-03-01

    Key words: strontium-89, yttrium-90, extraction and extraction-chromatographic purification of radionuclides, radiopharmaceuticals. Subjects of research: strontium-89 and yttrium-90 radionuclides and their chloride forms. Purpose of work is developing of radiochemical technologies on obtaining of 89 Sr and 90 Y on the WWR-SM reactor with high radionuclide purity. Methods of research: extraction and extraction-chromatographic methods of radionuclides separation, beta- and gamma-spectrometric methods of activity measuring. The results obtained and their novelty: Were determined the conformity to laws of Y and Sr distribution in two-phase systems TBP-HNO 3 , TBP-NH 4 NO 3 , TBP-HCI, HDEHP-NO 3 , HDEHP-NH 4 NO 3 and HDEHP-HCI. Were determined the conformity to laws of Y and Sr distribution in systems with craun ethers DB-18K-6 and DTBDB-18K-6 from water solutions of HNO 3 . Radiochemical technologies on obtaining of 89 Sr and 90 Y radionuclides including radiochemical process of yttrium target with using the systems TBP-HNO 3 and HDEHP/Teflone were developed. Practical value: the radiochemical technology of obtaining 89 Sr with high radionuclide purity was developed. The method of preparation a chloride compound of 89 SrCl 2 which is used as a drug form for preparation of 89 Sr- 'Metastron' was developed. The relatively simple method of on the way obtaining 90 Y in the reactor with high radionuclidic purity that is useful for follow using in medical practice was offered. Degree of embed and economic effectivity: the developed technologies have approbation in manufacturing conditions in Radiopreparat Enterprise of INP AS RU and were offered for receiving of domestic preparations against of import foreign analogues. The statement about using the invention by obtained patent is attached to dissertation. Field of application: the received results will be introduced in manufacture at Radiopreparat Enterprise of INP AS RU for receiving of domestic preparations

  6. Guiding Principles for Sustainable Existing Buildings: Radiochemical Processing Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Pope, Jason E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2013-11-11

    In 2006, the United States (U.S.) Department of Energy (DOE) signed the Federal Leadership in High Performance and Sustainable Buildings Memorandum of Understanding (MOU), along with 21 other agencies. Pacific Northwest National Laboratory (PNNL) is exceeding this requirement and, currently, about 25 percent of its buildings are High Performance and Sustainable Buildings. The pages that follow document the Guiding Principles conformance effort for the Radiochemical Processing Laboratory (RPL) at PNNL. The RPL effort is part of continued progress toward a building inventory that is 100 percent compliant with the Guiding Principles.

  7. Determination of platinum, palladium, iridium and gold on selected geological reference materials by radiochemical neutron activation analysis: comparison of procedures based on aqua regia leaching and sodium peroxide sintering

    Energy Technology Data Exchange (ETDEWEB)

    Nogueira, C.A.; Figueiredo, A.M.G. [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)

    1995-05-01

    A rapid and sensitive neutron activation method for the determination of platinum, palladium, iridium and gold in rocks is described. The procedure consists of thermal neutron irradiation of about 250 mg of sample, followed by chemical treatment of the rock, precipitation of gold and the platinum group elements with tellurium and high-resolution gamma-ray spectrometry with a hyper-pure Ge detector. Two different methods were used for the chemical treatment of the rock: aqua regia leaching and sintering with sodium peroxide. The procedures were evaluated by analysis of the certified reference material SARM-7 and the reference material CHR-Pt+. (author).

  8. Determination of platinum, palladium, iridium and gold on selected geological reference materials by radiochemical neutron activation analysis: comparison of procedures based on aqua regia leaching and sodium peroxide sintering

    International Nuclear Information System (INIS)

    Nogueira, C.A.; Figueiredo, A.M.G.

    1995-01-01

    A rapid and sensitive neutron activation method for the determination of platinum, palladium, iridium and gold in rocks is described. The procedure consists of thermal neutron irradiation of about 250 mg of sample, followed by chemical treatment of the rock, precipitation of gold and the platinum group elements with tellurium and high-resolution gamma-ray spectrometry with a hyper-pure Ge detector. Two different methods were used for the chemical treatment of the rock: aqua regia leaching and sintering with sodium peroxide. The procedures were evaluated by analysis of the certified reference material SARM-7 and the reference material CHR-Pt+. (author)

  9. The reliability of radiochemical and chemical trace analyses in environmental materials

    International Nuclear Information System (INIS)

    Heinonen, Jorma.

    1977-12-01

    After theoretically exploring the factors which influence the quality of analytical data as well as the means by which a sufficient quality can be assured and controlled, schemes of different kinds have been developed and applied in order to demonstrate the analytical quality assurance and control in practice. Methods have been developed for the determination of cesium, bromine and arsenic by neutron activation analysis at the natural ''background'' concentration level in environmental materials. The calibration of methods is described. The methods were also applied on practical routine analysis, the results of which are briefly reviewed. In the case of Ce the precision of a comprehensive calibration was found to vary between 5.2-9.2% as a relative standard deviation, which agrees well with the calculated statistical random error 5.7-8.7%. In the case of Br the method showed a reasonable precision, about 11% on the average, and accuracy. In employing the method to analyze died samples containing Br from 3 to 12 ppm a continuous control of precison was performed. The analysis of As demonstrates the many problems and difficulties associated with environmental analysis. In developing the final method four former intercomparison materials of IAEA were utilized in the calibration. The tests performed revealed a systematic error. In this case a scheme was developed for the continuous control of both precision and accuracy. The results of radiochemical analyses in environmental materials show a reliability somewhat better than that occuring in the determination of stable trace elements. According to a rough classification, 15% of the results of radiochemical analysis show excellent reliability, whereas 60% show a reliability adequate for certain purposes. The remaining 15% are excellent, 60% adequate for some purposes and 30% good-for-nothing. The reasons for often insufficient reliability of results are both organizational and technical. With reasonable effort and

  10. Comparative analysis of direct and indirect property investment ...

    African Journals Online (AJOL)

    Comparative analysis of direct and indirect property investment returns in Abuja. ... in property shares is more risky than commercial property due to the risk ... of the stock market, it was discovered that there is a strong positive relationship ...

  11. RADIOCHEMICAL YIELDS OF GRAFT POLYMERIZATION REACTIONS OF CELLULOSE

    Energy Technology Data Exchange (ETDEWEB)

    Arthur, Jr, J C; Blouin, F A

    1963-12-15

    The preparation of radioinduced graft polymers of cotton cellulose, while retaining the fibrous nature and high molecular weight of the cellulose, depended primarily on the radiochemical yields of cellulose reactions and of graft polymerization reactions. Yields of the initial major molecular changes in cellulosic polymer indicated that, in the case of scission of the molecule and carboxyl group formation, chain reactions were not initiated by radiation; however, in the case of carbonyl group formation chain reactions were initiated but quickly terminated. Generally, experimental procedures, used in graft polymerization reactions, were: simultaneous irradiation reactions, that is, application of monomers or solutions of monomers to cellulose or chemically modified celluloses, then irradiation; and post-irradiation reactions, that is, irradiation of cellulose or chemically modified celluloses, then after removal from the field of radiation, contacting the irradiated cellulose with monomer. Some of the most important factors influencing the radiochemical yields of graft polymerization reactions, of styrene and acrylonitrile onto cellulose were: concentration of monomer in treating solution; solvent; ratio of monomer solution to cellulose; prior chemical modification of cellulose; and absence of oxygen, particularly in post-irradiation reactions. Experimental data are presented, and the direct and indirect effects of Co/sup 60/ gamma radiation on these reactions are discussed. (auth)

  12. Surface Properties of TNOs: Preliminary Statistical Analysis

    Science.gov (United States)

    Antonieta Barucci, Maria; Fornasier, S.; Alvarez-Cantal, A.; de Bergh, C.; Merlin, F.; DeMeo, F.; Dumas, C.

    2009-09-01

    An overview of the surface properties based on the last results obtained during the Large Program performed at ESO-VLT (2007-2008) will be presented. Simultaneous high quality visible and near-infrared spectroscopy and photometry have been carried out on 40 objects with various dynamical properties, using FORS1 (V), ISAAC (J) and SINFONI (H+K bands) mounted respectively at UT2, UT1 and UT4 VLT-ESO telescopes (Cerro Paranal, Chile). For spectroscopy we computed the spectral slope for each object and searched for possible rotational inhomogeneities. A few objects show features in their visible spectra such as Eris, whose spectral bands are displaced with respect to pure methane-ice. We identify new faint absorption features on 10199 Chariklo and 42355 Typhon, possibly due to the presence of aqueous altered materials. The H+K band spectroscopy was performed with the new instrument SINFONI which is a 3D integral field spectrometer. While some objects show no diagnostic spectral bands, others reveal surface deposits of ices of H2O, CH3OH, CH4, and N2. To investigate the surface properties of these bodies, a radiative transfer model has been applied to interpret the entire 0.4-2.4 micron spectral region. The diversity of the spectra suggests that these objects represent a substantial range of bulk compositions. These different surface compositions can be diagnostic of original compositional diversity, interior source and/or different evolution with different physical processes affecting the surfaces. A statistical analysis is in progress to investigate the correlation of the TNOs’ surface properties with size and dynamical properties.

  13. Improving the radiochemical purity determination of 123I-labeled metaiodobenzylguanidine

    International Nuclear Information System (INIS)

    Luciana Carvalheira; Paulo Bechara Dutra; Paula Fernandes de Aguiar

    2014-01-01

    The HPLC method originally applied at the Nuclear Engineering Institute (IEN) for the radiochemical purity determination of 123iodine labeled m-iodobenzylguanidine ( 123 I-mIBG) takes 18.5 min. The final product release also depends on this result, and to facilitate this stage, we aimed to decrease this analysis time. We also intended to use fewer toxic compounds, if feasible. The optimization approach used herein was a combination of factorial and mixture designs to study simultaneously the selected variables. Analysis time, resolution and chromatograms aspect were the measured responses. The qualitative analysis of these responses provided the best chromatographic separation conditions that were 52 mM KH 2 PO 4 in a solution of ethanol and water (1:1), applying a flow rate of 0.50 mL min -1 and C18 column (4.6 × 250 mm, 5 μm). These optimum conditions not only decreased the analysis time in 61 %, but also allowed the reduction of mobile phase toxicity. To assure reliable data, method validation was performed for these conditions. The method has proved its specificity, the detection limit found was 3.70 × 10 -4 MBq mL -1 and the quantification limit has corresponded to 1.11 × 10 -3 MBq mL -1 . Repeatability and intermediate precision has not exceeded 3 and 5 %, respectively, and the accuracy has matched the interval of 95-105 %. This new method has been routinely applied in the radiochemical purity determination of 123 I-mIBG at IEN. (author)

  14. Progress on radiochemical analysis for nuclear waste management in decommissioning

    Energy Technology Data Exchange (ETDEWEB)

    Hou, X. (Technical Univ. of Denmark. Center for Nuclear Technologies (NuTech), Roskilde (Denmark))

    2012-01-15

    This report summarized the progress in the development and improvement of radioanalytical methods for decommissioning and waste management completed in the NKS-B RadWaste 2011 project. Based on the overview information of the analytical methods in Nordic laboratories and requirement from the nuclear industry provided in the first phase of the RadWaste project (2010), some methods were improved and developed. A method for efficiently separation of Nb from nuclear waste especially metals for measurement of long-lived 94Nb by gamma spectrometry was developed. By systematic investigation of behaviours of technetium in sample treatment and chromatographic separation process, an effective method was developed for the determination of low level 99Tc in waste samples. An AMS approachment was investigated to measure ultra low level 237Np using 242Pu for AMS normalization, the preliminary results show a high potential of this method. Some progress on characterization of waste for decommissioning of Danish DR3 is also presented. (Author)

  15. Radiochemical analysis of the body of the late Mr. Kuboyama

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, K; Ikedo, N; Kimura, K; Kawanishi, H; Kimura, M

    1956-01-01

    Analyses were carried out of various organs of Mr. Kuboyama 200 days after he had exposed himself to radiation of the atomic bomb explosion on Bikini Atoll, March, 1954. By ion-exchange chromatography, the presence of the following nuclides was indicated: /sup 144/Ce, and /sup 144/Pr in the bone (I) (20 x 10/sup -12/ counts/g. fresh wt.). Liver (II), and Kidneys (III); /sup 95/Zr and /sup 95/Nb in II and III; /sup 106/Rh, /sup 129m/Te, and /sup 129/Te in I, III, and muscles; and /sup 89/Sr, /sup 90/Sr, and /sup 90/Y in I, II, and III. Activities found in these organs were decidedly higher than those found in the control samples obtained from individuals who died of other than the so-called radiation sickness. Radiation dose received by the bones of Mr. Kuboyama was calculated to be approximately 8 r.e.p.

  16. Progress on radiochemical analysis for nuclear waste management in decommissioning

    International Nuclear Information System (INIS)

    Hou, X.

    2012-01-01

    This report summarized the progress in the development and improvement of radioanalytical methods for decommissioning and waste management completed in the NKS-B RadWaste 2011 project. Based on the overview information of the analytical methods in Nordic laboratories and requirement from the nuclear industry provided in the first phase of the RadWaste project (2010), some methods were improved and developed. A method for efficiently separation of Nb from nuclear waste especially metals for measurement of long-lived 94Nb by gamma spectrometry was developed. By systematic investigation of behaviours of technetium in sample treatment and chromatographic separation process, an effective method was developed for the determination of low level 99Tc in waste samples. An AMS approachment was investigated to measure ultra low level 237Np using 242Pu for AMS normalization, the preliminary results show a high potential of this method. Some progress on characterization of waste for decommissioning of Danish DR3 is also presented. (Author)

  17. RADCHEM 2005 - Radiochemical analysis in emergency and routine situations

    International Nuclear Information System (INIS)

    Sidhu, R.

    2006-04-01

    The report describes the work performed under the NKS-B project Radchem during 2005. RadChem-2005 has been focused towards laboratory work, and each participant has worked with improvement of existing procedures or development of new procedures. In addition an intercomparison exercise on the determination of natural radionuclides in ground water has been performed. Other work performed in Radchem-2005 include: 1) Development of new procedures for the determination of Am and Cm in environmental samples; 2) Development of a procedure for age determination of Pu; 3) Rapid determination of Pu using ICP-MS; 4) Determination of U, Pu and Am in emergency situations; 5) Sequential determination of Sr, U, Pu, Am and Cm in urine; 6) Ultra low level measurements using ICP-MS. (au)

  18. Analysis of accidents at the LPR (Radiochemical Processes Laboratory)

    International Nuclear Information System (INIS)

    Kaufmann, F.; Boutet, L.I.

    1987-01-01

    Accidents are defined as not planned events that may result in the emission of significative quantities of radioactive materials to the environment. The pilot plant has been specifically designed to prevent this type of accidents but there still exists the possibility that one or more accidents can be produced during the plant life. In a first phase, the emission of radionuclides to the environment were evaluated for 13 credible accidents. In a second phase, by means of the calculation program SEDA, specially adapted to this purpose, the critical doses of critical group were calculated for each accident. Due to the small capacity of the pilot plant and the long cooling period of treated fuel, it is concluded that the radiological consequences for the external environment are of very small magnitude. In this way, without need of developing complex fault- or event-trees, it is shown that any of the accidents falls into the non acceptable zone of Farmer diagram. (Author)

  19. The analytical of radiochemical purity of tumor receptor imaging agent 99Tcm-octreotide

    International Nuclear Information System (INIS)

    Wang Xufu; Zuo Shuyao; Shao Wenbo; Wang Guoming; Sun Jianwen; Zhang Qin

    2003-01-01

    The radiochemical purity of tumor receptor imaging agent 99 Tc m -octreotide is measured by High Pressure Liquid Chromatography (HPLC) and two systems of chromatography combining method of silver stain. The results show that the radiochemical purity of 98 Tc m -octreotide measured by both methods are effective and correct. It can separate 99 Tc m -octreotide from other radioactive compositions correctly and effectively

  20. ROCK PROPERTIES MODEL ANALYSIS MODEL REPORT

    International Nuclear Information System (INIS)

    Clinton Lum

    2002-01-01

    The purpose of this Analysis and Model Report (AMR) is to document Rock Properties Model (RPM) 3.1 with regard to input data, model methods, assumptions, uncertainties and limitations of model results, and qualification status of the model. The report also documents the differences between the current and previous versions and validation of the model. The rock properties models are intended principally for use as input to numerical physical-process modeling, such as of ground-water flow and/or radionuclide transport. The constraints, caveats, and limitations associated with this model are discussed in the appropriate text sections that follow. This work was conducted in accordance with the following planning documents: WA-0344, ''3-D Rock Properties Modeling for FY 1998'' (SNL 1997, WA-0358), ''3-D Rock Properties Modeling for FY 1999'' (SNL 1999), and the technical development plan, Rock Properties Model Version 3.1, (CRWMS MandO 1999c). The Interim Change Notice (ICNs), ICN 02 and ICN 03, of this AMR were prepared as part of activities being conducted under the Technical Work Plan, TWP-NBS-GS-000003, ''Technical Work Plan for the Integrated Site Model, Process Model Report, Revision 01'' (CRWMS MandO 2000b). The purpose of ICN 03 is to record changes in data input status due to data qualification and verification activities. These work plans describe the scope, objectives, tasks, methodology, and implementing procedures for model construction. The constraints, caveats, and limitations associated with this model are discussed in the appropriate text sections that follow. The work scope for this activity consists of the following: (1) Conversion of the input data (laboratory measured porosity data, x-ray diffraction mineralogy, petrophysical calculations of bound water, and petrophysical calculations of porosity) for each borehole into stratigraphic coordinates; (2) Re-sampling and merging of data sets; (3) Development of geostatistical simulations of porosity; (4

  1. Development of radiochemical separation method for determination of toxic elements in biological samples

    International Nuclear Information System (INIS)

    Maihara, V.A.; Vasconcellos, M.B.A.; Favaro, D.I.T.; Armelin, M.J.A.

    1990-01-01

    In order to determine Hg, Sb, As and Se in biological materials by neutron activation analysis, a radiochemical separation was developed. The chemical separation procedure used was based on the digestion of the irradiated sample in a mixture of H NO 3 and H 2 SO 4 in a teflon bomb, at 130 0 C for 1 to 4 hours. After the dissolution of organic matter, Hg and Sb were retained by a Dowex 2-X8 resin column in 6 M HCl. The effluent was passed through a TDO, tin dioxide column which retains As and Se in 3 M HCl medium. Radioactive tracers of these elements were used to determine the yields of the separation process. Certified reference materials were analyzed to check the precision and accuracy of the method. (author)

  2. Development of a radiochemical separation method for toxic elements determination from biologic samples

    International Nuclear Information System (INIS)

    Malhara, V.A.; Vasconcellos, M.B.A.; Favaro, D.I.T.; Armelin, M.J.A.

    1990-01-01

    In order to determine Hg, Sb, As and Se in biological materials by neutron activation analysis, a radiochemical separation was developed. The chemical separation procedure used was based on the digestion of the irradiated sample in a mixture of HNO 3 and H 2 SO 4 in a teflon bomb, at 130 0 C for 1 to 4 hours. After the dissolution of organic matter, Hg and Sb were retained by a Dowex 2-XB resin column in 6M HCI. The efluent was passed through a TDO, tin dioxide column which retains As and Se in 3M HCI medium. Radioactive tracers of these elements were used to determine the yields of the separation process. Certified reference materials were analyzed to check the precision and accuracy of the method. (author)

  3. Paleomagnetism and radiochemical age estimates for Late Brunhes polarity episodes

    International Nuclear Information System (INIS)

    Denham, C.R.; Anderson, R.F.; Bacon, M.P.

    1977-01-01

    Several reversed polarity magnetozones occur within deep-sea sediment core CH57-8 from the Greater Antilles Outer Ridge, within sediment of latest Pleistocene/Late Brunhes age. The uppermost reversed interval spanning 31 data points coincides with the X faunal zone of the Last Interglacial Period. Radiochemical dating of cores CH57-8 and KN25-4 has shown that all the reversed polarity magnetozones are significantly younger than the Brunhes/Matuyama boundary at 0.7 m.y.B.P. A variation of the excess 230 Th method was used, in which 210 Po and 238 U were the actual radionuclides measured. In a third core from the Mid-Atlantic Ridge, the 210 Po results were similar to those which others obtained earlier by direct 230 Th measurements. (Auth.)

  4. Development of robotic plasma radiochemical assays for positron emission tomography

    International Nuclear Information System (INIS)

    Alexoff, D.L.; Shea, C.; Fowler, J.S.; Gatley, S.J.; Schlyer, D.J.

    1995-01-01

    A commercial laboratory robot system (Zymate PyTechnology II Laboratory Automation System; Zymark Corporation, Hopkinton, MA) was interfaced to standard and custom laboratory equipment and programmed to perform rapid radiochemical analyses for quantitative PET studies. A Zymark XP robot arm was used to carry out the determination of unchanged (parent) radiotracer in plasma using only solid phase extraction methods. Robotic throughput for the assay of parent radiotracer in plasma is 4--6 samples/hour depending on the radiotracer. Robotic assays of parent compound in plasma were validated for the radiotracers [ 11 C]Benztropine, [ 11 C]cocaine, [ 11 C]clorgyline, [ 11 C]deprenyl, [ 11 C]methadone, [ 11 C]methylphenidate, [ 11 C]raclorpride, and [ 11 C]SR46349B. A simple robot-assisted methods development strategy has been implemented to facilitate the automation of plasma assays of new radiotracers

  5. Quantitative radio-chemical separation of calcium, strontium and barium

    International Nuclear Information System (INIS)

    Dupuis, M.C.; Dupuis, M.; Le Nagard, M.; Michot, H.

    1965-01-01

    A method for separation of Ca 45 , Sr 89 and Ba 140 has been developed for the radiochemical determination of these isotopes in a solution of fission with a large concentration of mineral salts. After removal of most fission products by solvent extraction (TTA-MIBK) at different pH, the alkaline earths are extracted from the aqueous phase at pH 9. After recovery with diluted hydrochloric acid, the three elements are adsorbed on cationic resin Dowex 50 and eluted sequentially with ammonium α - Hydroxy iso-butyrate using gradient concentration and pH. Ca 45 and Sr 89 are measured by β - counting and Ba 140 by γ spectrometry. The chemical yield approximates 80 per cent for calcium, and 70 per cent for strontium and barium. The decontamination factor is 10 5 for most fission products. Four separations can be performed in twenty hours. (authors) [fr

  6. Handling of Ammonium Nitrate Mother-Liquid Radiochemical Production - 13089

    International Nuclear Information System (INIS)

    Zherebtsov, Alexander; Dvoeglazov, Konstantine; Volk, Vladimir; Zagumenov, Vladimir; Zverev, Dmitriy; Tinin, Vasiliy; Kozyrev, Anatoly; Shamin, Dladimir; Tvilenev, Konstantin

    2013-01-01

    The aim of the work is to develop a basic technology of decomposition of ammonium nitrate stock solutions produced in radiochemical enterprises engaged in the reprocessing of irradiated nuclear fuel and fabrication of fresh fuel. It was necessary to work out how to conduct a one-step thermal decomposition of ammonium nitrate, select and test the catalysts for this process and to prepare proposals for recycling condensation. Necessary accessories were added to a laboratory equipment installation decomposition of ammonium nitrate. It is tested several types of reducing agents and two types of catalyst to neutralize the nitrogen oxides. It is conducted testing of modes of the process to produce condensation, suitable for use in the conversion of a new technological scheme of production. It is studied the structure of the catalysts before and after their use in a laboratory setting. It is tested the selected catalyst in the optimal range for 48 hours of continuous operation. (authors)

  7. Computer aided design of piping for a radiochemical plant

    Energy Technology Data Exchange (ETDEWEB)

    Selvaraj, P G; Chandrasekhar, A; Chandrasekar, A V [Reprocessing Group, Indira Gandhi Centre for Atomic Research, Kalpakkam (India); Raju, R P; Mahudeeswaran, K V; Kumar, S V [Reprocessing Group, Bhabha Atomic Research Centre, Mumbai (India)

    1994-06-01

    In a radiochemical plant such as reprocessing plants, process equipment, storage tanks, liquid transfer systems and the associated pipe lines etc. are housed in series of concrete cells. Availability of limited cell space/volume, provision of various modes of liquid transfers with associated redundancies and instrumentation lines with standby alternatives increase the overall piping density. Designing such high density piping layout without interference is quite complex and needs lot of human efforts. This paper briefly describes development of computer codes for the entire scheme of design, drafting and fabrication of piping for nuclear fuel reprocessing plant. The general organisation of various programs, their functions, the complete sequence of the scheme and the flow of data are presented. High degree of reliability of each routine, considerable error checking facilities, marking legends on the drawings, provision for scaling in drafting and accuracy to the extent of one mm in layout design are some of the important features of this scheme. (author). 1 fig.

  8. 15th radiochemical conference: Booklet of abstracts and conference programme

    International Nuclear Information System (INIS)

    John, J.; Benes, P.; Kucera, J.; Havela, L.; Bartonicek, B.; Vobecky, M.; Krizova, V.; Kopicka, K.; Prasil, Z.

    2006-04-01

    The conference was structured as follows: Opening plenary lectures (6 lectures); Topic 1 - radionuclides in the environment, radioecology (22 verbal presentations (VPs), 23 poster presentations (PPs)); Topic 2 - nuclear analytical methods (22 VPs, 32 PPs); Topic 3 - chemistry of actinide and transactinide elements (8 VPs, 10 PPs); Topic 4 - radiation chemistry (9 VPs, 5 PPs); Topic 5 - production and application of radionuclides (17 VPs, 6 PPs); Topic 6 - separation methods, speciation (21 VPs, 23 PPs); Topic 7 - chemistry of nuclear fuel cycle, radiochemical problems in nuclear waste management (20 VPs, 16 PPs); Topic 8 - nuclear methods in medicine, radiopharmaceuticals, and radiodiagnostics, labelled compounds (8 VPs, 7 PPs); and Panels (2 introductions). (P.A.)

  9. The design of a new radiochemical laboratory complex

    International Nuclear Information System (INIS)

    Lewis, A.G.

    1984-01-01

    A brief account is given of the history and scope of Amersham International plc in the manufacture of radiopharmaceuticals and other labelled organic compounds, and radioactive sources. Extra facilities were needed and a new site was found, and contracts placed for new radiochemical laboratories. The two new laboratories, which are described in some detail, are intended as follows: (a) a Medical Products building for the production of a range of diagnostic kits for use in the treatment of thyroid and other disorders, the main isotope used being iodine-125; and (b) the Chemical Products building, for the development and manufacture of a wide range of organic compounds, which are labelled with either tritium or carbon-14. Particular emphasis is given to the description of the air conditioning and ventilation systems, the open work benches, and the special ventilated enclosures, and the drainage system. Planning for maximum flexibility is also stressed. (U.K.)

  10. Radiochemical methods for studying lipase-catalyzed interesterification of lipids

    International Nuclear Information System (INIS)

    Schuch, R.; Mukherjee, K.D.

    1987-01-01

    Reactions involving lipase-catalyzed interesterification of lipids, which are of commendable interest in biotechnology, have been monitored and assayed by radiochemical methods using 14 C-labeled substrates. Medium chain (C 12 plus C 14 ) triacylglycerols were reacted in the presence of an immobilized lipase from Mucor miehei and hexane at 45 0 C with methyl [1- 14 C]oleate, [1- 14 C]oleic acid, [carboxyl- 14 C]trioleoylglycerol, [1- 14 C]octadecenyl alcohol, and [U- 14 C]glycerol, each of known specific activity. The reactions were monitored and the rate of interesterification determined by radio thin layer chromatography from the incorporation of radioactivity into acyl moieties of triacylglycerols (from methyl oleate, oleic acid, and trioleoylglycerol), alkyl moieties of wax esters (from octadecenyl alcohol), and into glycerol backbone of monoacylglycerols and diacylglycerols (from glycerol). (orig.)

  11. Research reactor FR2 - 20 years chemical and radiochemical measurements

    International Nuclear Information System (INIS)

    Feuerstein, H.; Graebner, H.; Oschinski, J.; Hoffmann, W.; Beyer, J.

    1986-09-01

    The FR2 has been a D 2 O cooled and moderated research reactor with a thermal output of 44 MW. It was in operation from 1961 to 1981. Because of the operating conditions of the reactor, only a small number of routine measurements were performed. For these however special techniques had to be developed. During the 20 years of operation a number of special events occured or have been observed, sometimes with very amazing results, e.g. the 'aceton effect'. This report describes the chemical and radiochemical conditions of the reactor systems, as well as the results of the surveilance work. Not described are measurements for the many experiments. The last chapter gives in a short form a description of the most unusual events and observations. (orig.) [de

  12. Radiochemical investigations on the solubility of molybdatophosphate in phosphate determination

    International Nuclear Information System (INIS)

    Noack, S.

    1975-01-01

    The solubility of various molybdatophosphates was determined under the conditions of a gravimetric phosphate determination by radiochemical means by labelling PO 4 3- with P-32. Starting with various conditions for phosphate determination via the molybdatophosphate of quinoline, 8-hydroxyquinoline, dimorpholino ethane, N,N,N',N'-tetrakis-β-hydroxypropyl ethylene diamine and N,N,N',N'-tetrakis-β-hydroxybutyl ethylene diamine, a general working rule was developed to determine the solubility. Taking the example of quinoline molybdatophosphates, a series of influencing factors - work, concentration and measuring parameters - were investigated in order to be able to limit the reliability region of the gravimetric phosphate determination. Depending on the conditions, the measured solubilities were between 10 -10 and 10 -6 Mol/l, the corresponding degrees of precipitation between 99.0 and 99.9999%. Apparent solubility products were calculated for the different molybdatophosphates using computer programmes especially developed for this purpose. (orig./RB) [de

  13. A rapid, simple method for obtaining radiochemically pure hepatic heme

    International Nuclear Information System (INIS)

    Bonkowski, H.L.; Bement, W.J.; Erny, R.

    1978-01-01

    Radioactively-labelled heme has usually been isolated from liver to which unlabelled carrier has been added by long, laborious techniques involving organic solvent extraction followed by crystallization. A simpler, rapid method is devised for obtaining radiochemically-pure heme synthesized in vivo in rat liver from delta-amino[4- 14 C]levulinate. This method, in which the heme is extracted into ethyl acetate/glacial acetic acid and in which porphyrins are removed from the heme-containing organic phase with HCl washes, does not require addition of carrier heme. The new method gives better heme recoveries than and heme specific activities identical to, those obtained using the crystallization method. In this new method heme must be synthesized from delta-amino[4- 14 C]levulinate; it is not satisfactory to use [2- 14 C]glycine substrate because non-heme counts are isolated in the heme fraction. (Auth.)

  14. Characterization of filter cartridges from the IEA-R1 reactor by radiochemical method

    International Nuclear Information System (INIS)

    Geraldo, Bianca; Vicente, Roberto; Ferreira, Robson J.; Goes, Marcos M.; Marumo, Julio T.

    2015-01-01

    The filter cartridges used in water purification system of research nuclear reactor IEA-R1 are considered radioactive wastes after their useful life. The characterization of these wastes is one of the stages of management, which aims to identify and quantify the radionuclides present, including those known as 'difficult to measure' (DTM) radionuclides. Establish a radiochemical analysis methodology for this type of waste is a difficult job, not only by the application of these techniques, but also by the amount of radionuclides that should be analyzed. In the waste produced in a nuclear reactor, the most important radionuclides are fission products, activation products and transuranic elements. Since these radionuclides emit gamma radiation not measurable in its decay process and consequently are difficult to measure, their concentrations can be estimated by indirect methods such as scale factors. This method is used to evaluate the DTM concentration, which is represented by alpha and beta nuclides using the correlation between them and the radionuclide key, a gamma emitter. The objective of this work is to describe a radiochemical analysis methodology for gamma emitter nuclides, present in the filter cartridges, evaluating the activity and concentrations by destructive assays. At the same time, two studies have been performed by non-destructive assays, the first one based on dose rates and the point kernel method to correlate the results and the second one based on calibration efficiency with Monte Carlo method. These studies belong to the radioactive waste characterization program that has been conducted at the Waste Management Laboratory of Nuclear and Energy Research Institute, IPEN-CNEN/SP. (author)

  15. Characterization of filter cartridges from the IEA-R1 reactor by radiochemical method

    Energy Technology Data Exchange (ETDEWEB)

    Geraldo, Bianca; Vicente, Roberto; Ferreira, Robson J.; Goes, Marcos M.; Marumo, Julio T., E-mail: bgeraldo@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    The filter cartridges used in water purification system of research nuclear reactor IEA-R1 are considered radioactive wastes after their useful life. The characterization of these wastes is one of the stages of management, which aims to identify and quantify the radionuclides present, including those known as 'difficult to measure' (DTM) radionuclides. Establish a radiochemical analysis methodology for this type of waste is a difficult job, not only by the application of these techniques, but also by the amount of radionuclides that should be analyzed. In the waste produced in a nuclear reactor, the most important radionuclides are fission products, activation products and transuranic elements. Since these radionuclides emit gamma radiation not measurable in its decay process and consequently are difficult to measure, their concentrations can be estimated by indirect methods such as scale factors. This method is used to evaluate the DTM concentration, which is represented by alpha and beta nuclides using the correlation between them and the radionuclide key, a gamma emitter. The objective of this work is to describe a radiochemical analysis methodology for gamma emitter nuclides, present in the filter cartridges, evaluating the activity and concentrations by destructive assays. At the same time, two studies have been performed by non-destructive assays, the first one based on dose rates and the point kernel method to correlate the results and the second one based on calibration efficiency with Monte Carlo method. These studies belong to the radioactive waste characterization program that has been conducted at the Waste Management Laboratory of Nuclear and Energy Research Institute, IPEN-CNEN/SP. (author)

  16. Radiochemical analyses of several spent fuel Approved Testing Materials

    International Nuclear Information System (INIS)

    Guenther, R.J.; Blahnik, D.E.; Wildung, N.J.

    1994-09-01

    Radiochemical characterization data are described for UO 2 and UO 2 plus 3 wt% Gd 2 O 3 commercial spent nuclear fuel taken from a series of Approved Testing Materials (ATMs). These full-length nuclear fuel rods include MLA091 of ATM-103, MKP070 of ATM-104, NBD095 and NBD131 of ATM-106, and ADN0206 of ATM-108. ATMs 103, 104, and 106 were all irradiated in the Calvert Cliffs Nuclear Power Plant (Reactor No.1), a pressurized-water reactor that used fuel fabricated by Combustion Engineering. ATM-108 was part of the same fuel bundle designed as ATM-105 and came from boiling-water reactor fuel fabricated by General Electric and irradiated in the Cooper Nuclear Power Plant. Rod average burnups and expected fission gas releases ranged from 2,400 to 3,700 GJ/kgM. (25 to 40 Mwd/kgM) and from less than 1% to greater than 10%, respectively, depending on the specific ATM. The radiochemical analyses included uranium and plutonium isotopes in the fuel, selected fission products in the fuel, fuel burnup, cesium and iodine on the inner surfaces of the cladding, 14 C in the fuel and cladding, and analyses of the gases released to the rod plenum. Supporting examinations such as fuel rod design and material descriptions, power histories, and gamma scans used for sectioning diagrams are also included. These ATMs were examined as part of the Materials Characterization Center Program conducted at Pacific Northwest Laboratory provide a source of well-characterized spent fuel for testing in support of the US Department of Energy Office of Civilian Radioactive Waste Management Program

  17. Rapid Radiochemical Analyses in Support of Fukushima Nuclear Accident - 13196

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, Sherrod L.; Culligan, Brian K.; Hutchison, Jay B. [Savannah River National Laboratory, Building 735-B, Aiken, SC 29808 (United States)

    2013-07-01

    There is an increasing need to develop faster analytical methods for emergency response, including emergency soil and air filter samples [1, 2]. The Savannah River National Laboratory (SRNL) performed analyses on samples received from Japan in April, 2011 as part of a U.S. Department of Energy effort to provide assistance to the government of Japan, following the nuclear event at Fukushima Daiichi, resulting from the earthquake and tsunami on March 11, 2011. Of particular concern was whether it was safe to plant rice in certain areas (prefectures) near Fukushima. The primary objectives of the sample collection, sample analysis, and data assessment teams were to evaluate personnel exposure hazards, identify the nuclear power plant radiological source term and plume deposition, and assist the government of Japan in assessing any environmental and agricultural impacts associated with the nuclear event. SRNL analyzed approximately 250 samples and reported approximately 500 analytical method determinations. Samples included soil from farmland surrounding the Fukushima reactors and air monitoring samples of national interest, including those collected at the U.S. Embassy and American military bases. Samples were analyzed for a wide range of radionuclides, including strontium-89, strontium-90, gamma-emitting radionuclides, and plutonium, uranium, americium and curium isotopes. Technical aspects of the rapid soil and air filter analyses will be described. The extent of radiostrontium contamination was a significant concern. For {sup 89,90}Sr analyses on soil samples, a rapid fusion technique using 1.5 gram soil aliquots to enable a Minimum Detectable Activity (MDA) of <1 pCi {sup 89,90}Sr /g of soil was employed. This sequential technique has been published recently by this laboratory for actinides and radiostrontium in soil and vegetation [3, 4]. It consists of a rapid sodium hydroxide fusion, pre-concentration steps using iron hydroxide and calcium fluoride

  18. Assessment of radiochemical purity of [{sup 18}F]fludeoxyglucose by high pressure liquid chromatography (HPLC)

    Energy Technology Data Exchange (ETDEWEB)

    Lacerda, Aline E.; Silva, Juliana B.; Silveira, Marina B.; Ferreira, Soraya Z., E-mail: radiofarmacoscdtn@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil). Unidade de Pesquisa e Producao de Radiofarmacos

    2011-07-01

    The quality control of [{sup 18}F]fludeoxyglucose ({sup 18}FDG) has received attention due to its increasing clinical use. Although the quality requirements of {sup 18}FDG are established in various pharmacopoeia, the suitability of all testing methods used should be verified under actual conditions of use and documented. The aim of this study was to develop a high pressure liquid chromatography (HPLC) method for radiochemical purity evaluation of {sup 18}FDG, based on pharmacopoeia references, and to verify its suitability for routine quality control in our centre. HPLC analysis was performed with an Agilent HPLC. {sup 18}FDG and impurities were separated on an anion-exchange column by isocratic elution with 0.1 M NaOH as the mobile phase. Detection was accomplished with refractive index and NaI (Tl) scintillation detectors. The flow rate of the mobile phase was set at 0.8 mL/min and the column temperature was kept at 35 deg C. Specificity, linearity, precision and robustness were assessed to verify if the method was adequate for its intended purpose. Retention time of {sup 18}FDG was not affected by the presence of other components of the formulation and a good peak resolution was achieved. The analytical curve of {sup 18}FDG was linear, with a correlation coefficient value of 0.9995. Intraday repeatable precision, reported as the relative standard deviation, was 0.11%. Analytical procedure remained unaffected by small variations in mobile phase flow rate. Results evidenced that HPLC is suitable for radiochemical purity evaluation of {sup 18}FDG, considering operational conditions of our laboratory. (author)

  19. On-Line Monitoring for Control and Safeguarding of Radiochemical Streams at Spent Fuel Reprocessing Plant

    International Nuclear Information System (INIS)

    Bryan, Samuel A.; Levitskaia, Tatiana G.; Billing, Justin M.; Casella, Amanda J.; Johnsen, Amanda M.; Peterson, James M.

    2009-01-01

    Advanced techniques enabling enhanced safeguarding of the spent fuel reprocessing plants are urgently needed. Our approach is based on prerequisite that real time monitoring of the solvent extraction flowsheets provides unique capability to quickly detect unwanted manipulations with fissile isotopes present in the radiochemical streams during reprocessing activities. The methods used to monitor these processes must be robust and must be able to withstand harsh radiation and chemical environments. A new on-line monitoring system satisfying these requirements and featuring Raman spectroscopy combined with a Coriolis and conductivity probes, has been recently developed by our research team. It provides immediate chemical data and flow parameters of high-level radioactive waste streams with high brine content generated during retrieval activities from Hanford nuclear waste storage tanks. The nature of the radiochemical streams at the spent fuel reprocessing plant calls for additional spectroscopic information, which can be gained by the utilization of UV-vis-NIR capabilities. Raman and UV-vis-NIR spectroscopies are analytical techniques that have extensively been extensively applied for measuring the various organic and inorganic compounds including actinides. The corresponding spectrometers used under the laboratory conditions are easily convertible to the process-friendly configurations allowing remote measurements under the flow conditions. A fiber optic Raman probe allows monitoring of the high concentration species encountered in both aqueous and organic phases within the UREX suite of flowsheets, including metal oxide ions, such as uranyl, components of the organic solvent, inorganic oxo-anions, and water. The actinides and lanthanides are monitored remotely by UV-vis-NIR spectroscopy in aqueous and organic phases. In this report, we will present our recent results on spectroscopic measurements of simulant flowsheet solutions and commercial fuels available at

  20. Assessment of radiochemical purity of [18F]fludeoxyglucose by high pressure liquid chromatography (HPLC)

    International Nuclear Information System (INIS)

    Lacerda, Aline E.; Silva, Juliana B.; Silveira, Marina B.; Ferreira, Soraya Z.

    2011-01-01

    The quality control of [ 18 F]fludeoxyglucose ( 18 FDG) has received attention due to its increasing clinical use. Although the quality requirements of 18 FDG are established in various pharmacopoeia, the suitability of all testing methods used should be verified under actual conditions of use and documented. The aim of this study was to develop a high pressure liquid chromatography (HPLC) method for radiochemical purity evaluation of 18 FDG, based on pharmacopoeia references, and to verify its suitability for routine quality control in our centre. HPLC analysis was performed with an Agilent HPLC. 18 FDG and impurities were separated on an anion-exchange column by isocratic elution with 0.1 M NaOH as the mobile phase. Detection was accomplished with refractive index and NaI (Tl) scintillation detectors. The flow rate of the mobile phase was set at 0.8 mL/min and the column temperature was kept at 35 deg C. Specificity, linearity, precision and robustness were assessed to verify if the method was adequate for its intended purpose. Retention time of 18 FDG was not affected by the presence of other components of the formulation and a good peak resolution was achieved. The analytical curve of 18 FDG was linear, with a correlation coefficient value of 0.9995. Intraday repeatable precision, reported as the relative standard deviation, was 0.11%. Analytical procedure remained unaffected by small variations in mobile phase flow rate. Results evidenced that HPLC is suitable for radiochemical purity evaluation of 18 FDG, considering operational conditions of our laboratory. (author)

  1. Comparison study among methodologies of planar chromatography for radiochemical control of technetium-99m

    International Nuclear Information System (INIS)

    Monteiro, Elisiane de Godoy

    2012-01-01

    Radiopharmaceuticals are substances that have radioisotopes in their composition. About 95% of the procedures performed in nuclear medicine use radiopharmaceuticals with diagnostic purposes, and the Lyophilized Reagents (LR) labeled with Technetium-99m ( 99 mTc), obtained from 99 Mo/ 99 mTc generator, are the most one used. Quality Control represents the set of assays to be performed to assure that the product is adequate to its purpose. An important feature to be evaluated in 99m Tc radiopharmaceuticals is the radiochemical purity (% RqP) to quantify free pertechnetate ( 99 mTcO 4 - ) and technetium colloidal (99mTcO 2 ) mainly by paper chromatography (PC), thin layer (TLC) and High Performance Liquid Chromatography (HPLC). The objective of this work was to perform the comparison among the radiochemical control methodologies of LR labeled with 99m Tc, described in the United States Pharmacopoeia (USP) and European Pharmacopoeia (EP) and those used by IPEN. 99m TcO 4 - eluate and DISIDA, DMSA, DTPA, EC, ECD, GHA, MIBI, MDP, PIRO, SAH and Sn Coloidal LR were provided by IPEN-CNEN/SP. TLC-cellulose, TLC-SG.TLC-SG reverse phase, HPTLC-cellulose, HPTLC-SG (Merck) and ITLC-SG (Pall Corporation), W1MM, W3MM, W17M e W31ET (Whatman) chromatographic plates were used. The measurement of the radioactivity was done in a Perkin Elmer Cobra D-5002 gamma counter. LR were labeled to obtain 55,0 MBq mL 1 (1,5 mCi mL 1 ) of final radioactive concentration. The % 99m TcO 4 - , % 99m TcO 2 and % RqP were determined up to 4 hour labeling. From 11 LR, only EC and GHA have no radiochemical control methods in USP and EP. In USP and/or EP, DTPA, MDP, PIRO, SAH and Sn Coloidal methods use ITLC-SG; IPEN uses this chromatography plate in DISIDA, EC, ECD, GHA, PIRO, MIBI and SAH. As ITLC-SG had been out of production (recommended in 40, 70 and 41% of the USP, EP and IPEN methodologies, respectively), it was necessary to search alternatives to replace ITLC-SG plate in the radiochemical control

  2. FINANCING INTELLECTUAL PROPERTY ASSESTS: AN EMPIRICAL ANALYSIS

    OpenAIRE

    USHA SWAMINATHAN

    2016-01-01

    Amplifying any property needs assessment to be marketable. This paper reads on the prospects of intangible property especially the Intellectual Property (IP) being evaluated in terms of financing by institutions to progressively grow more by widening their business and to make available advances based on IP. Arrangements engaging in the safety measures of intangible property encompassed and facilitated title-holders of IP privileges to comprise a loan of money as more undemanding and protecte...

  3. Materials properties, loads, and stress analysis, Spartan REM: Appendix A

    Science.gov (United States)

    Marlowe, D. S.; West, E. J.

    1984-01-01

    The mechanical properties, load tests, and stress analysis of the Spartan Release Engagement Mechanism (REM) is presented. The fracture properties of the components of the unit are also discussed. Detailed engineering drawings are included.

  4. Radiolabeling of anti-CD20 with Re-188 for treatment of non-Hodgkin's lymphoma: radiochemical control

    International Nuclear Information System (INIS)

    Dias, Carla R.; Osso Junior, Joao A.

    2009-01-01

    The development of tumor-selective radiopharmaceuticals is clinically desirable as a means of detecting or confirming the presence and location of primary and metastatic lesions and monitoring tumor response to (chemo)therapy. In addition, the application of targeted radiotherapeutics provides a unique and effective modality for direct tumor treatment. In this manner the radioimmunotherapy (RIT) uses the targeting features of monoclonal antibody to deliver radiation from an attached radionuclide. Antibody therapy directed against the CD20 antigen on the surface of B-cells is considered one of the first successful target-specific therapies in oncology. The radionuclide rhenium-188 ( 188 Re) is currently produced from the father nuclide tungsten-188 ( 188 W) through a transportable generator system. Because of its easy availability and suitable nuclear properties (EβMAX = 2.1 MeV, t 1/2 = 16.9 h, Eγ = 155 keV), this radionuclide is considered an attractive candidate for application as therapeutic agent and could be conveniently utilized for imaging and dosimetric purposes. The purpose of this work is to show the radiochemical control of the optimized formulation (solution) and lyophilized formulation (kit) of labeled rituximab (anti-CD20) with 188 Re. Rituximab was reduced by incubation with 2-mercaptoethanol at room temperature. The number of resulting free sulfhydryl groups was assayed with Ellman's reagent. Radiochemical purity of 188 Re-rituximab was evaluated using instant thin layer chromatography-silica gel (ITLC-SG). Quality control methods for evaluation of radiochemical purity showed good labeling yield of the antibody. (author)

  5. Radioactive preparations. Determination of radiochemical purity by thin-layer chromatography

    International Nuclear Information System (INIS)

    1986-01-01

    The standard sets the data which must be attached to every sample, and the equipment, chemicals and auxiliary substances used in the determination of radiochemical purity of substances by chromatography. Described are preparation of the sample, the procedure of sample deposition, the development, drying and detection of the radioactive preparation. The qualitative and quantitative assessment of the radiochromatogram is described as are the calculation of radiochemical purity and the determination of the reproducibility of measurement of radiochemical purity of radioactive preparations. (E.S.)

  6. Radiochemical search for neutron-rich isotopes of element 107

    International Nuclear Information System (INIS)

    Schaedel, M.

    1987-01-01

    Recent mass calculations have indicated that there is a region of deformed nuclei around neutron number N=162 that is especially stable against spontaneous fission. Barrier heights of about 5 MeV for Z = 107 nuclides can be extrapolated. To search for new, neutron-rich isotopes of element 107 in radiochemical experiments with 254 Es as a target an on-line chemical separation of element 107 (EKA-Rhenium), especially from the actinide elements is needed. An on-line gas-phase chemistry was developed with the homolog Re based on the volatility of the oxide which is transported in an O 2 containing atmosphere along a temperature gradient in a quartz tube and is condensed onto a thin Ta coated Ni-foil. The authors applied this technique in two series of experiments with their rotating wheel on-line gas-phase chemistry apparatus at the 88-inch cyclotron where they irradiated 254 Es as a target with 93 MeV and 96 MeV 16 O ions to search for 266 107. The assignment of the observed alpha events between 8 and 9 MeV to possibly (1) non actinide contaminants like 212 Po, (2) known isotopes of heavy elements like 261 105, or (3) a new isotope will be discussed

  7. Development of a radiochemical sensor. Part I: Feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Tarancon, A. [Departament de Quimica Analitica, Facultat de Quimica, Universitat de Barcelona, C/ Marti Franques 1, 08028 Barcelona (Spain); Garcia, J.F. [Departament de Pintura, Facultat de Belles Arts, Universitat de Barcelona, C/ Pau Gargallo 4, 08028 Barcelona (Spain)]. E-mail: jfgarcia@apolo.qui.ub.es; Rauret, G. [Departament de Quimica Analitica, Facultat de Quimica, Universitat de Barcelona, C/ Marti Franques 1, 08028 Barcelona (Spain)

    2005-05-04

    The evolution of nuclear activities and criteria for radiation protection have led to a continuous increase in measures to monitor and control the environment and therefore in the number of determinations required for such purposes. Classical analytical procedures are time-consuming, labor-intense and generate a large amount of waste. The alternative use of sensors for such determinations has seen very limited development. The present study focuses on the evaluation of the behavior of a prototype radiochemical sensor for liquid effluents. The sensor is based on a receptor made of a plastic scintillator and is capable of continuous, on-time and accurate remote quantification of the activity of alpha, beta and beta-gamma emitters. Low-level active solutions of {sup 90}Sr/{sup 90}Y, {sup 238}Pu, {sup 134}Cs and {sup 60}Co in matrices of groundwater, seawater and drinking water were quantified with prediction errors lower than 10% in most cases. The study also yields information about light generation and transmission and transductor configuration that will be useful in the design of future versions of this sensor.

  8. Planning for maintenance in radiochemical facilities [Paper No.: VB-2

    International Nuclear Information System (INIS)

    Balasubramanian, G.R.

    1981-01-01

    Reprocessing facilities in the earlier stages of development were planned mainly based on the concept of direct maintenance in view of the inherent advantage of man-machine interface and initial savings in the investment costs. With the mechanical processes finding a firm place in head-end operation and increase in down time necessary for elaborate decontamination efforts even for a minor modification has led to the review of the concept. For the same reason, the recent plants are based on the concept of harmonious blend of both direct and remote maintenance. The paper describes the planning needed from consideration of various aspects related to such concepts of maintenance during different phases of such type of facilities, highlighting some of the tools and special equipments to be developed for this purpose. A brief description of recent development in the field of remote maintenance is also given. Though the basic hot facility of reference is the one of reprocessing fast reactor fuels, the concepts and systems discussed are equally applicable to other radiochemical and radiometallurgical facilities also. (author)

  9. Waste treatment at the Radiochemical Engineering Development Center

    International Nuclear Information System (INIS)

    Brunson, R.R.; Bond, W.D.; Chattin, F.R.; Collins, R.T.; Sullivan, G.R.; Wiles, R.H.

    1997-01-01

    At the Radiochemical Engineering Development Center (REDC) irradiated targets are processed for the recovery of valuable radioisotopes, principally transuranium nuclides. A system was recently installed for treating the various liquid alkaline waste streams for removal of excess radioactive contaminants at the REDC. Radionuclides that are removed will be stored as solids and thus the future discharge of radionuclides to liquid low level waste tank storage will be greatly reduced. The treatment system is of modular design and is installed in a hot cell (Cubicle 7) in Building 7920 at the REDC where preliminary testing is in progress. The module incorporates the following: (1) a resorcinol-formaldehyde resin column for Cs removal, (2) a cross flow filtration unit for removal of rare earths and actinides as hydroxide, and (3) a waste solidification unit. Process flowsheets for operation of the module, key features of the module design, and its computer-assisted control system are presented. Good operability of the cross flow filter system is mandatory to the successful treatment of REDC wastes. Results of tests to date on the operation of the filter in its slurry collection mode and its slurry washing mode are presented. These tests include the effects of entrained organic solvent in the waste stream feed to the filter

  10. Remote sampling of process fluids in radiochemical plants

    International Nuclear Information System (INIS)

    Sengar, P.B.; Bhattacharya, R.; Ozarde, P. D.; Rana, D.S.

    1990-01-01

    Sampling of process fluids, continuous or periodic, is an essential requirement in any chemical process plant, so as to keep a control on process variables. In a radiochemical plant the task of taking and conveying the samples is a very tricky affair. This is due to the fact that neither the vessels/equipment containing radioactive effluents can be approached for manual sampling nor sampled fluids can be handled directly. The problems become more accute with higher levels of radioactivity. As such, inovative systems have to be devised to obtain and handle the raioactive samples employing remote operations. The remote sampling system developed in this Division has some of the unique features such as taking only requisite amount of samples in microlitre range, practically maintenance free design, avoidence of excess radioactive fluids coming out of process systems, etc. The paper describes in detail the design of remote sampling system and compares the same with existing systems. The design efforts are towards simplicity in operation, obtaining homogenised representative samples and highly economical on man-rem expenditure. The performance of a prototype system has also been evaluated. (author). 3 refs

  11. Automated radiochemical synthesis and biodistribution of [11C]l-α-acetylmethadol ([11C]LAAM)

    International Nuclear Information System (INIS)

    Sai, Kiran Kumar Solingapuram; Fan, Jinda; Tu, Zhude; Zerkel, Patrick; Mach, Robert H.; Kharasch, Evan D.

    2014-01-01

    Long-acting opioid agonists methadone and l-α-acetylmethadol (LAAM) prevent withdrawal in opioid-dependent persons. Attempts to synthesize [ 11 C]-methadone for PET evaluation of brain disposition were unsuccessful. Owing, however, to structural and pharmacologic similarities, we aimed to develop [ 11 C]LAAM as a PET ligand to probe the brain exposure of long-lasting opioids in humans. This manuscript describes [ 11 C]LAAM synthesis and its biodistribution in mice. The radiochemical synthetic strategy afforded high radiochemical yield, purity and specific activity, thereby making the synthesis adaptable to automated modules. - Highlights: • Radiochemical synthesis of opioid [ 11 C]l-α-acetylmethadol (LAAM) described for the first time. • High radiochemical yield, purity and specific activity. • Easily reproducible and adaptable synthesis to any C-11 automated modules. • [ 11 C]LAAM utility as a PET radiopharmaceutical for assessing brain penetration

  12. Investigations of radiochemical methods for the platinum group metals for NAA

    International Nuclear Information System (INIS)

    Tredoux, M.

    A radiochemical procedure for the determination of the platinum group metals and gold is outlined in this report. The sample is irradiated, treated with acids and passed through anion-exchange columns before being determined by gamma spectrometry

  13. Radiochemical and biological control of metaiodobenzyl-guanidine (MIBG) labeled with 131I

    International Nuclear Information System (INIS)

    Barboza, M.R.F.F. de; Muramoto, E.; Colturato, M.T.; Silva Valente Goncalves, R. da; Pereira, N.P.S. de; Almeida, M.A.T.M. de; Silva, C.P.G. da.

    1988-07-01

    This study shows the standardization of the radiochemical control of MIBG - 131 I in eletrophoretic system and also the biological control in Wistar rat for a period of time, not longer than 60 minutes after tracer administration. (author) [pt

  14. Development of radiochemical methods for the determination of radionuclides in water samples

    International Nuclear Information System (INIS)

    Vajda, N.; Molnar, Zs.; Bodizs, D.

    2004-01-01

    Depending on the composition of minerals, ores, soils and the properties of water various amounts of radionuclides of natural origin are released into different types of water i.e. surface and ground water, mineral and well water. Furthermore, man-made radionuclides can contaminate the surface waters in the form of fallout from nuclear incidents followed by migration of the deposited isotopes into water. Measurement of radionuclides in water helps prevent the consumption of radioactive water causing high radiation doses and also enables the early discovery of contamination sources. For the latter reason monitoring radioactivity in ground water in the vicinity of nuclear installations is of great importance. High sensitivity radiochemical methods have been developed/adopted for the simultaneous determination of 90 Sr-Pu nuclides, 137 Cs- 90 Sr-Pu nuclides in 50-100 L of water. Typically, procedures contain a pre-concentration step most likely by means of co-precipitation followed by a selective separation procedure preferably by means of extraction chromatography. In most cases Sr and Pu are extracted with a crown ether and an organic phosphonate compound, respectively, while Cs is concentrated using AMP. In the presence of extremely high salt content e.g. in case of 100 L of sea water the standard extraction chromatographic procedure has to be replaced by the conventional technique of Sr-Ca separation based on the different solubilities of the nitrate precipitates. Selection criteria as well as description of the procedures will be given in detail. A high sensitivity procedure has been developed for the analysis of 129 I in 100 L of ground water based on pre-concentration with AgCI and separation by extraction with CCl 4 . The following nuclear measuring techniques were applied: LSC, alpha spectrorhetry, gamma spectrometry, neutron activation (including gamma spectrometry) for 90 Sr, 239,240 Pu, 137 Cs, and 129 I, respectively. Sensitivities of the given methods

  15. ESOL facility for the generation and radiochemical separation of short half-life fission products

    International Nuclear Information System (INIS)

    Gehrke, R.J.; Meikrantz, D.H.; Baker, J.D.; Anderl, R.A.; Novick, V.J.; Greenwood, R.C.

    1988-01-01

    A facility has been developed at the Idaho National Engineering Laboratory (INEL) for the generation and rapid radiochemical separation of short half-life mixed fission products. This facility, referred to as the Idaho Elemental Separation On Line (ESOL), consists of electro-plated sources of spontaneously fissioning 252 Cf with a helium jet transport arrangement to continuously deliver short half-life, mixed fission products to the radiochemistry laboratory for rapid, computer controlled, radiochemical separations. 18 refs., 13 figs

  16. A comparison of the radiochemical stability of different iodine-131 labelled metaiodobenzylguanidine formulations for therapeutic use

    International Nuclear Information System (INIS)

    Wafelman, A.R.; Beijnen, J.H.; Hoefnagel, C.A.; Maes, R.A.A.

    1994-01-01

    The results of a stability study of three commercially available formulations of [ 131 I]MIBG for therapeutic use and an unstabilized formulation, stored under various conditions, are presented. The stability was followed for 20 days. In all formulations tested, free [ 131 I]iodide, formed by radiolysis, was the most important radiochemical impurity. The pharmaceutical formulation with the largest amount of stabilizer was radiochemically - but not chemically -most stable. (author)

  17. Mapping ash properties using principal components analysis

    Science.gov (United States)

    Pereira, Paulo; Brevik, Eric; Cerda, Artemi; Ubeda, Xavier; Novara, Agata; Francos, Marcos; Rodrigo-Comino, Jesus; Bogunovic, Igor; Khaledian, Yones

    2017-04-01

    In post-fire environments ash has important benefits for soils, such as protection and source of nutrients, crucial for vegetation recuperation (Jordan et al., 2016; Pereira et al., 2015a; 2016a,b). The thickness and distribution of ash are fundamental aspects for soil protection (Cerdà and Doerr, 2008; Pereira et al., 2015b) and the severity at which was produced is important for the type and amount of elements that is released in soil solution (Bodi et al., 2014). Ash is very mobile material, and it is important were it will be deposited. Until the first rainfalls are is very mobile. After it, bind in the soil surface and is harder to erode. Mapping ash properties in the immediate period after fire is complex, since it is constantly moving (Pereira et al., 2015b). However, is an important task, since according the amount and type of ash produced we can identify the degree of soil protection and the nutrients that will be dissolved. The objective of this work is to apply to map ash properties (CaCO3, pH, and select extractable elements) using a principal component analysis (PCA) in the immediate period after the fire. Four days after the fire we established a grid in a 9x27 m area and took ash samples every 3 meters for a total of 40 sampling points (Pereira et al., 2017). The PCA identified 5 different factors. Factor 1 identified high loadings in electrical conductivity, calcium, and magnesium and negative with aluminum and iron, while Factor 3 had high positive loadings in total phosphorous and silica. Factor 3 showed high positive loadings in sodium and potassium, factor 4 high negative loadings in CaCO3 and pH, and factor 5 high loadings in sodium and potassium. The experimental variograms of the extracted factors showed that the Gaussian model was the most precise to model factor 1, the linear to model factor 2 and the wave hole effect to model factor 3, 4 and 5. The maps produced confirm the patternd observed in the experimental variograms. Factor 1 and 2

  18. Evaluation of different detection systems to determine the radiochemical purity of the technetium eluate and the radiopharmaceutical sestamibi

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Poliane Angelo de L.; Andrade, Wellington G., E-mail: polianeangelo@gmail.com, E-mail: wandrade@cnen.gov.br [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Dept. de Energia Nuclear; Santos, Luiz Antonio P.; Lima, Fabiana Farias de, E-mail: luanps@uol.com.br, E-mail: fflima@cnen.gov.br [Centro Regional de Ciencias Nucleares do Nordeste (CRCN/CNEN-PE), Recife, PE (Brazil)

    2013-07-01

    Since 2008 the Brazilian Health Surveillance Agency (ANVISA) has imposed some rules requiring that Nuclear Medicine Services (NMS) perform a minimum of tests with the radiopharmaceuticals before they are administered to their patients according to the Resolution n. 38 (RDC 38). Among the tests, the radiochemical purity is very important because the effectiveness for the use in vivo, and the fact radiochemical impurities may increase the radiation dose beyond to cause some damage in the diagnostic images. Radiochemical Purity is determined by ascendant chromatography technique and when it is used by NMS, the strips are analyzed in dose calibrator. Furthermore, the low activity on the strips can produce errors due to the low detection of this equipment type. Therefore, the aim of this paper is to compare different methods for determining the radiochemical purity of {sup 99m}Tc eluate and {sup 99m}Tc-MIBI radiopharmaceutical; gamma camera, and dose calibrator. The study was developed in three clinics in Recife-PE, and 15 analyses were performed to determine radiochemical purity of technetium eluate and {sup 99m}Tc-MIBI. For evaluating technetium eluate it was used Whatman® 3MM paper in 1cmx8cm strips. On the other hand, for analyzing MIBI radiopharmaceutical it was used 3 Whatman® 3MM paper strips and 3 with silica gel in 1cmx6.5cm format. According to the manufactures, an 1cm point from the base of the strip was labeled. It was dropped 50μ1 of sodium pertechnetate and {sup 99m}Tc-MIBI and, then, the strips were put in the glass tank, with solvent, according to the pharmacopoeia and inserts of the drug manufacturers. After the solvent front reached the end point, the strips were removed and allowed to dry. Firstly, the radioactivity count was made with a gamma camera. After that, the strips were cut in half (eluate) and in 2.5 cm from the base (MIBI) and measured with a dose calibrator. The results of the average radiochemical purity of the eluate in clinics A, B

  19. Determination of inorganic pyrophosphatase in rat odontoblast layer by a radiochemical method

    International Nuclear Information System (INIS)

    Granstroem, G.; Linde, A.

    1975-01-01

    The enzyme inorganic pyrophosphatase (PPsub(i)ase, EC 3.6.1.1) from the odontoblastic layer of rat incisors has been studied by means of a radiochemical micromethod. The enzyme was incubated with 32 P-pyrophosphate in tris-HCl buffer at 37degC. The reaction was linear with time fr at least 45 min, and the pH optimum was found to be 8.8, independent of the amount of pyrophosphate present. Heating the enzyme at 56degC inhibited the enzyme activity rapidly, Mg 2+ ions activated the enzyme by 15 % at an ion concentration of 4 mM, while higher concentrations were inhibitory. Ca 2+ ions and PO 4 3- ions inhibited the enzyme at all concentrations. F - ions did not affect the PPsub(i)ase at concentrations below 8 mM, whereas higher concentrations had an inhibiting effect. Urea was found to inhibit the enzyme at concentrations above 1.5 M, while EDTA was a strong inhibitor at very low concentrations. The characteristics of PPsub(i)ase agree well with the properties of the enzyme nonspecific alkaline phosphatase (EC 3.1.3.1.) studied earlier. (author)

  20. ProRisk : risk analysis instrument : developed for William properties

    NARCIS (Netherlands)

    van Doorn, W.H.W.; Egeberg, Ingrid; Hendrickx, Kristoff; Kahramaner, Y.; Masseur, B.; Waijers, Koen; Weglicka, K.A.

    2005-01-01

    This report presents a Risk Analysis Instrument developed for William Properties. Based on the analysis, it appears that the practice of Risk Analysis exists within the organization, yet rather implicit. The Risk Analysis Instrument comes with a package of four components: an activity diagram, a

  1. Radiochemically pure [1-14C]valproic acid--a mixture of labeled structural isomers

    International Nuclear Information System (INIS)

    Dickinson, R.G.; Wood, B.T.; Kluck, R.M.; Hooper, W.D.

    1986-01-01

    Ongoing studies of the disposition of valproic acid (VPA) and its glucuronide conjugate required the radiolabeled drug for greater sensitivity and tracing of oxidation metabolites. [1- 14 C]VPA hereinafter called LABEL (radiochemical purity greater than 98% as determined by paper and thin layer chromatography) was purchased from Amersham International, U.K. Quantitative analysis of VPA and VPA-glucuronide in bile and urine samples from rats given VPA and tracer LABEL by our standard gas chromatographic assay showed gross discrepancies with the results obtained by liquid scintillation counting of the same extracts. Examination of the purity of LABEL was therefore undertaken. Equilibration of LABEL between various organic-aqueous solvent pairs was identical to that of authentic VPA. However, gas chromatographic-mass spectrometric analysis of the trimethylsilyl derivative of LABEL revealed it to be a mixture of labeled 2-methylheptanoic acid (approximately 60%), 2-ethylhexanoic acid (approximately 30%), and 2-propylpentanoic acid (i.e., VPA, 5-10%). The origin of the isomers of VPA in LABEL was logically traced to the synthetic procedure--coupling of the Grignard reagent of (an isomeric mixture of 2-, 3-, and 4-) chloroheptane(s) with [ 14 C]carbon dioxide. This result highlights the inadequacy of the quality control procedures used and reinforces the necessity for caution in accepting the quoted purity of radiolabeled drugs

  2. Determination of radiochemical purity and pharmacokinetic parameters of sup(99m)Tc-sulphur colloid and sup(99m)Tc-tin colloid

    International Nuclear Information System (INIS)

    Jovanovic, V.; Konstantinovska, D.; Milivojevic, K.; Bzenic, J.

    1981-01-01

    Labelling yield and radiochemical purity, higher than 95%, of sup(99m)Tc-colloid preparations were determined by using the paper chromatography method. Less than 3% of labelled citric acid, added to the preparation as a buffer solution, has been found in sup(99m)Tc-sulphur colloid. High radiochemical purity and optimum size of colloid particles has also been proved by biodistribution studies on experimental animals. The analysis performed has shown that more than 50% of sup(99m)Tc-colloid preparations excreted by urine is sup(99m)TcO - , the remaining past 50% being protein bound sup(99m)Tc. Biological half-time of excretion of the fast phase is the same for both preparations, i.e. 10 min, while for the slow component it is 120 min in sup(99m)Tc-S-colloid and 160 min in sup(99m)Tc-Sn colloid. (orig.) [de

  3. Utility of reversed phase high performance liquid chromatography for on-line yield determination of radiochemical separations: Studies with cobalt

    International Nuclear Information System (INIS)

    Subramanian, S.; Woittiez, J.R.W.

    1993-01-01

    This article indicates the potentials of high performance liquid chromatography (HPLC) as a radiochemical technique for multielement separation of neutron irradiated samples. The focus lies on the convenience to use the detector signal of the eluted components to indicate the chemical yield of the analyte, which has often proved to be a crucial step in radiochemical separations. Two signals have been utilized. The UV signal of the metal-ligand complexes separated by reversed phase HPLC and the radioactive response as a result of sample irradiation of carrier-tracer addition. Change in ratio is discussed between the two signals, if any, for a specific sample. Losses of metal as much as 65% were simulated and corrected using the individual UV response. The method promises improved accuracy for elemental analysis despite losses suffered during the various chemical steps. The procedure omits the necessity of additional analytical steps for yield determination. The present article aims at the chromatographic part of the study. Cobalt as cobalt diethyldithiocarbamate has been used to demonstrate the viability of the concept. The separation was developed on c C18 reverse phase analytical column and optimized on a semi preparative one

  4. Fuel cladding mechanical properties for transient analysis

    International Nuclear Information System (INIS)

    Johnson, G.D.; Hunter, C.W.; Hanson, J.E.

    1976-01-01

    Out-of-pile simulated transient tests have been conducted on irradiated fast-reactor fuel pin cladding specimens at heating rates of 10 0 F/s (5.6 0 K/s) and 200 0 F/s (111 0 K/s) to generate mechanical property information for use in describing cladding behavior during off-normal events. Mechanical property data were then analyzed, applying the Larson-Miller Parameter to the effects of heating rate and neutron fluence. Data from simulated transient tests on TREAT-tested fuel pins demonstrate that Plant Protective System termination of 3$/s transients prevents significant damage to cladding. The breach opening produced during simulated transient testing is shown to decrease in size with increasing neutron fluence

  5. AGC 2 Irradiated Material Properties Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Rohrbaugh, David Thomas [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-05-01

    The Advanced Reactor Technologies Graphite Research and Development Program is conducting an extensive graphite irradiation experiment to provide data for licensing of a high temperature reactor (HTR) design. In past applications, graphite has been used effectively as a structural and moderator material in both research and commercial high temperature gas cooled reactor designs. , Nuclear graphite H 451, used previously in the United States for nuclear reactor graphite components, is no longer available. New nuclear graphite grades have been developed and are considered suitable candidates for new HTR reactor designs. To support the design and licensing of HTR core components within a commercial reactor, a complete properties database must be developed for these current grades of graphite. Quantitative data on in service material performance are required for the physical, mechanical, and thermal properties of each graphite grade, with a specific emphasis on data accounting for the life limiting effects of irradiation creep on key physical properties of the HTR candidate graphite grades. Further details on the research and development activities and associated rationale required to qualify nuclear grade graphite for use within the HTR are documented in the graphite technology research and development plan.

  6. Nanosilicon properties, synthesis, applications, methods of analysis and control

    CERN Document Server

    Ischenko, Anatoly A; Aslalnov, Leonid A

    2015-01-01

    Nanosilicon: Properties, Synthesis, Applications, Methods of Analysis and Control examines the latest developments on the physics and chemistry of nanosilicon. The book focuses on methods for producing nanosilicon, its electronic and optical properties, research methods to characterize its spectral and structural properties, and its possible applications. The first part of the book covers the basic properties of semiconductors, including causes of the size dependence of the properties, structural and electronic properties, and physical characteristics of the various forms of silicon. It presents theoretical and experimental research results as well as examples of porous silicon and quantum dots. The second part discusses the synthesis of nanosilicon, modification of the surface of nanoparticles, and properties of the resulting particles. The authors give special attention to the photoluminescence of silicon nanoparticles. The third part describes methods used for studying and controlling the structure and pro...

  7. Standard method of test for atom percent fission in uranium fuel - radiochemical method

    International Nuclear Information System (INIS)

    Anon.

    The determination of the U at. % fission that has occurred in U fuel from an analysis of the 137 Cs ratio to U ratio after irradiation is described. The method is applicable to high-density, clad U fuels (metal, alloys, or ceramic compounds) in which no separation of U and Cs has occurred. The fuels are best aged for several months after irradiation in order to reduce the 13-day 136 Cs activity. The fuel is dissolved and diluted to produce a solution containing a final concentration of U of 100 to 1000 mg U/l. The 137 Cs concentration is determined by ASTM method E 320, for Radiochemical Determination of Cesium-137 in Nuclear Fuel Solutions, and the U concentration is determined by ASTM method E 267, for Determination of Uranium and Plutonium Concentrations and Isotopic Abundances, ASTM method E 318, for Colorimetric Determination of Uranium by Controlled-Potential Coulometry. Calculations are given for correcting the 137 Cs concentration for decay during and after irradiation. The accuracy of this method is limited, not only by the experimental errors with which the fission yield and the half-life of 137 Cs are known

  8. Development of an HPLC method for the radiochemical purity evaluation of [18F]Fluoroestradiol

    International Nuclear Information System (INIS)

    Bispo, Ana Carolina de A.; Nascimento, Leonardo T.C. do; Costa, Flávia M.; Silva, Juliana B. da; Mamede, Marcelo

    2017-01-01

    18 F-Fluoroestradiol ([ 18 F]FES), an estrogen analog, is a radiopharmaceutical used in Positron Emission Tomography (PET) that allows evaluating the tumor cell receptor profile and the best therapy strategy, the staging, the prognosis and the response to therapy in several breast cancer cases. As there is not any pharmacopoeia's monograph of [ 18 F]FES to standardize its quality control criteria, this work presents a new HPCL's method to perform the [ 18 F]FES radiochemical purity. A liquid chromatograph was used with radioactivity and ultraviolet detectors. Three concentrations of fluoroestradiol standard solution were used along the test. Their retention time was compared to its relative radiolabelled analogue to confirm its identity. Several mobile phases with acetonitrile and two mobile phase flows were tested to optimize the runs. Peaks symmetry, retention time, theoretical plates and resolution were analyzed to choose the best conditions. The mean retention time of both standard Fluoroestradiol and [ 18 F]FES solutions were the same, demonstrating that [ 18 F]FES formulation did not interfere with [ 18 F]FES analysis. The best conditions were 1.2 mL/min and isocratic 40% V/V acetonitrile in water, which gave [ 18 F]FES peak resolution greater than 6 and symmetry factor of 1. Thus, the developed method is ready to be validated and implemented in [ 18 F]FES quality control routine in CDTN/Brazil. (author)

  9. Development of an HPLC method for the radiochemical purity evaluation of [{sup 18}F]Fluoroestradiol

    Energy Technology Data Exchange (ETDEWEB)

    Bispo, Ana Carolina de A.; Nascimento, Leonardo T.C. do; Costa, Flávia M.; Silva, Juliana B. da, E-mail: anacarollbispo@gmail.com [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil). Unidade de Pesquisa e Produção de Radiofármacos; Mamede, Marcelo, E-mail: mamede.mm@gmail.com [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Anatomia e Imagem

    2017-07-01

    {sup 18}F-Fluoroestradiol ([{sup 18}F]FES), an estrogen analog, is a radiopharmaceutical used in Positron Emission Tomography (PET) that allows evaluating the tumor cell receptor profile and the best therapy strategy, the staging, the prognosis and the response to therapy in several breast cancer cases. As there is not any pharmacopoeia's monograph of [{sup 18}F]FES to standardize its quality control criteria, this work presents a new HPCL's method to perform the [{sup 18}F]FES radiochemical purity. A liquid chromatograph was used with radioactivity and ultraviolet detectors. Three concentrations of fluoroestradiol standard solution were used along the test. Their retention time was compared to its relative radiolabelled analogue to confirm its identity. Several mobile phases with acetonitrile and two mobile phase flows were tested to optimize the runs. Peaks symmetry, retention time, theoretical plates and resolution were analyzed to choose the best conditions. The mean retention time of both standard Fluoroestradiol and [{sup 18}F]FES solutions were the same, demonstrating that [{sup 18}F]FES formulation did not interfere with [{sup 18}F]FES analysis. The best conditions were 1.2 mL/min and isocratic 40% V/V acetonitrile in water, which gave [{sup 18}F]FES peak resolution greater than 6 and symmetry factor of 1. Thus, the developed method is ready to be validated and implemented in [{sup 18}F]FES quality control routine in CDTN/Brazil. (author)

  10. Observations on the radiochemical control of radiopharmaceuticals at tajoura nuclear research center (TNRC)

    International Nuclear Information System (INIS)

    Abuzwida, M.A.; Saad, M.A.; Elmagrahi, H.; Elghanodi, Y.

    1998-01-01

    Production of radioisotopes for the radiopharmaceutical purposes is the main task of Tajoura nuclear center. During the analysis of the 131 I- radioactive solution which was produced using the so-called dry method, the following has been observed : in order to reduce the cost and the time of analytical cycle or time used for the radiochemical purity (RCP), a spot test has been used to indicate the position of the radioactivity in the chromatogram rather than using autoradiographing or the x-ray films. This method was based on the reaction between I 2 and starch to give a blue color at different R f values I 2 is liberated by I - oxidation (H 2 O 2 ) or by IO - 3 reaction with SCN - in the presence of HCl. A simple and fast test for the estimation of the content in the radioactive sample has been elaborated.This method was based on the reduction of Te (IV) or (VI) to Te metal using SnCI 2 in a alkaline media. The detection limit of the elaborated method was found to be 131 I- buffer solution, and 16.0 m S for Na CI saline solution were obtained

  11. Analysis of Mechanical Properties for GEM Foil

    CERN Document Server

    Chin, Yuk Ming

    2016-01-01

    In view of new assembly technique of the GEM detector; in which three foils stack is stretched to get the uniform gaps among the foils. We studied the mechanical properties of the foil material. We conditioned the samples in different environments to make them extra dry and wet. As holes are the major source of the charge amplification their deformation can effect the detector performance. Therefore in our studies we also studied at which level of the stress the holes deformation is seen. These tensile and holes deformation studies can help to optimize the stress during detector assembly.

  12. antibacterial properties and preliminary phytochemical analysis

    African Journals Online (AJOL)

    DR. AMINU

    2Department of Pharmaceutical Chemistry, Faculty of Pharmacy, University of Benin, Benin City. *Correspondence ... phytochemical analysis of the dried leaves extracts revealed the presence of alkaloids, ... for the synthesis of useful drugs.

  13. Analysis of rheological properties of bone cements.

    Science.gov (United States)

    Nicholas, M K D; Waters, M G J; Holford, K M; Adusei, G

    2007-07-01

    The rheological properties of three commercially available bone cements, CMW 1, Palacos R and Cemex ISOPLASTIC, were investigated. Testing was undertaken at both 25 and 37 degrees C using an oscillating parallel plate rheometer. Results showed that the three high viscosity cements exhibited distinct differences in curing rate, with CMW 1 curing in 8.7 min, Palacos R and Cemex ISOPLASTIC in 13 min at 25 degrees C. Furthermore it was found that these curing rates were strongly temperature dependent, with curing rates being halved at 37 degrees C. By monitoring the change of viscosity with time over the entire curing process, the results showed that these cements had differing viscosity profiles and hence exhibit very different handling characteristics. However, all the cements reached the same maximum viscosity of 75 x 10(3) Pa s. Also, the change in elastic/viscous moduli and tan delta with time, show the cements changing from a viscous material to an elastic solid with a clear peak in the viscous modulus during the latter stages of curing. These results give valuable information about the changes in rheological properties for each commercial bone cement, especially during the final curing process.

  14. Nuclear materials thermo-physical property database and property analysis using the database

    International Nuclear Information System (INIS)

    Jeong, Yeong Seok

    2002-02-01

    It is necessary that thermo-physical properties and understand of nuclear materials for evaluation and analysis to steady and accident states of commercial and research reactor. In this study, development of nuclear materials thermo-properties database and home page. In application of this database, it is analyzed of thermal conductivity, heat capacity, enthalpy, and linear thermal expansion of fuel and cladding material and compared thermo-properties model in nuclear fuel performance evaluation codes with experimental data in database. Results of compare thermo-property model of UO 2 fuel and cladding major performance evaluation code, both are similar

  15. QuickChecking Static Analysis Properties

    DEFF Research Database (Denmark)

    Midtgaard, Jan; Møller, Anders

    2015-01-01

    A static analysis can check programs for potential errors. A natural question that arises is therefore: who checks the checker? Researchers have given this question varying attention, ranging from basic testing techniques, informal monotonicity arguments, thorough pen-and-paper soundness proofs...... of a lattice. Moreover, we offer a number of generic, type-safe combinators to check transfer functions and operators on lattices, to help ensure that these are, e.g., monotone, strict, or invariant. We substantiate our claims by quickchecking a type analysis for the Lua programming language...

  16. QuickChecking static analysis properties

    DEFF Research Database (Denmark)

    Midtgaard, Jan; Møller, Anders

    2017-01-01

    A static analysis can check programs for potential errors. A natural question that arises is therefore: who checks the checker? Researchers have given this question varying attention, ranging from basic testing techniques, informal monotonicity arguments, thorough pen-and-paper soundness proofs....... Moreover, we offer a number of generic, type-safe combinators to check transfer functions and operators on lattices, to help ensure that these are, eg, monotone, strict, or invariant. We substantiate our claims by quickchecking a type analysis for the Lua programming language....

  17. A general approach to the construction of 'very accurate' or 'definitive' methods by radiochemical NAA and the role of these methods in QA

    International Nuclear Information System (INIS)

    Dybczynski, R.

    1998-01-01

    Constant progress in instrumentation and methodology of inorganic trace analysis is not always paralleled by improvement in reliability of analytical results. Our approach to construction of 'very accurate' methods for the determination of selected trace elements in biological materials by RNAA is based on an assumption that: (i) The radionuclide in question should be selectively and quantitatively isolated from the irradiated sample by a suitable radiochemical scheme, optimized with respect to this particular radionuclide, yielding finally the analyte in the state of high radiochemical purity what assures interference-free measurement by gamma-ray spectrometry. (ii) The radiochemical scheme should be based on ion exchange and/or extraction column chromatography resulting in an easy automatic repetition of an elementary act of distribution of the analyte and accompanying radionuclides between stationary and mobile phases. (iii) The method should have some intrinsic mechanisms incorporated into the procedure preventing any possibility of making gross errors. Based on these general assumptions, several more specific rules for devising of 'very accurate' methods were formulated and applied when elaborating our methods for the determination of copper, cobalt, nickel, cadmium, molybdenum and uranium in biological materials. The significance of such methods for Quality Assurance is pointed out and illustrated by their use in the certification campaign of the new Polish biological CRMs based on tobacco

  18. Method of determination of radiochemical purity of gallium-67 citrate injection

    International Nuclear Information System (INIS)

    Wang Quanji

    1985-01-01

    A simple method is used to compare the effect of five developing agents on the radiochemical purity of neutral products of 67 GaCit and on Rsub(f) values. Two preferable developing agents are recommended as suitable for the identification of 67 GaCit injection in its production. The effect of six pH values of different developing agents on radiochemical purity, Rsub(f) and chromatogram are compared for the neutral products. The results of the experiments show that the ascending paper chromatography with 1:2:4 pyridine/ethanol/water and 85:15 methanol/water is preferable for the determination of the radiochemical purity of 67 GaCit. The other developing agents also can be used if there are not any impurities except gallium radioisotopes

  19. Radiolabeling, quality control and radiochemical purity assessment of 99mTc-HYNIC-TOC

    International Nuclear Information System (INIS)

    Melero, Laura T.U.H.; Araujo, Elaine B.; Mengatti, Jair

    2009-01-01

    Somatostatine receptors are widely expressed by several tumors, especially of the neuroendocrine origin. In vivo images of these tumors using radiolabeled somatostatine analogues became a useful clinical tool in oncology. The aim of this work was the radiolabeling of the somatostatine analogue HYNIC-TOC with 99mTc as well as the evaluation of the radiochemical stability and quality control of labeled complex. 99mTc-HYNIC-TOC was produced by labeling conditions using 20 μg of peptide, 20 mg of tricine and 10 mg of EDDA as coligands, 1110 MBq of 99mTc (99Mo-99mTc IPEN-TEC generator) and 15 μg of SnCl 2 .2H 2 O. The reaction proceeds for 10 minutes at boiling water bath. Radiochemical purity of labeled preparation was evaluated by different chromatographic systems: ITLC-SG in methanol:ammonium acetate (1:1); TLC-SG in sodium citrate buffer 0.1 N pH 5.0 and methylethylketone, and HPLC employing column C-18, 5 μm, 4.6 mm x 250 mm, UV (220 nm), radioactivity detectors, 1 mL/minute flow of acetonitrile and trifluoroacetic acid solution 0.1 %. Labeled compound has been found radiochemically stable for 5 hours and radiochemical purity was higher than 90 %. The thin layer chromatographic systems enabled the separation of radiochemical species presented in the labeled mixture as well as HPLC system. The labeling procedure studied resulted in high radiochemical yield and easy preparation. Future works include the preparation of a lyophilized reagent to make feasible the preparation of 99mTc-HYNIC-TOC at nuclear medicine services in order to study the clinical potential of the radiopharmaceutical in diagnostic and staging of neuroendocrine tumors. (author)

  20. Radiolabeling, quality control and radiochemical purity assessment of {sup 99m}Tc-HYNIC-TOC

    Energy Technology Data Exchange (ETDEWEB)

    Melero, Laura T.U.H.; Araujo, Elaine B.; Mengatti, Jair [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2009-07-01

    Somatostatine receptors are widely expressed by several tumors, especially of the neuroendocrine origin. In vivo images of these tumors using radiolabeled somatostatine analogues became a useful clinical tool in oncology. The aim of this work was the radiolabeling of the somatostatine analogue HYNIC-TOC with 99mTc as well as the evaluation of the radiochemical stability and quality control of labeled complex. 99mTc-HYNIC-TOC was produced by labeling conditions using 20 {mu}g of peptide, 20 mg of tricine and 10 mg of EDDA as coligands, 1110 MBq of 99mTc (99Mo-99mTc IPEN-TEC generator) and 15 {mu}g of SnCl{sub 2}.2H{sub 2}O. The reaction proceeds for 10 minutes at boiling water bath. Radiochemical purity of labeled preparation was evaluated by different chromatographic systems: ITLC-SG in methanol:ammonium acetate (1:1); TLC-SG in sodium citrate buffer 0.1 N pH 5.0 and methylethylketone, and HPLC employing column C-18, 5 {mu}m, 4.6 mm x 250 mm, UV (220 nm), radioactivity detectors, 1 mL/minute flow of acetonitrile and trifluoroacetic acid solution 0.1 %. Labeled compound has been found radiochemically stable for 5 hours and radiochemical purity was higher than 90 %. The thin layer chromatographic systems enabled the separation of radiochemical species presented in the labeled mixture as well as HPLC system. The labeling procedure studied resulted in high radiochemical yield and easy preparation. Future works include the preparation of a lyophilized reagent to make feasible the preparation of 99mTc-HYNIC-TOC at nuclear medicine services in order to study the clinical potential of the radiopharmaceutical in diagnostic and staging of neuroendocrine tumors. (author)

  1. Radiochemical procedures for determination of selected members of the uranium and thorium series

    International Nuclear Information System (INIS)

    Smithson, G.L.

    1979-01-01

    The radiochemical procedures contained in this manual are adaptations of those developed and published by many radiochemists. In many cases the identity of the originator is not clear and usually modifications in the original procedure have been made by subsequent workers. Nearly all of the basic radiochemical techniques and separations in use today were developed during the Manhattan Project and can be found in U.S.A.E.C. reports published from 1945 to 1953. This manual contains methods for the determination of Pb-210, Po-210; Ra-226, Ra-228, Th-228, Th-230 and Th-232. (auth)

  2. Abyssal sediment erosion from the Central Indian Basin: Evidence from radiochemical and radiolarian studies

    Digital Repository Service at National Institute of Oceanography (India)

    Banakar, V.K.; Gupta, S.M.; Padmavati, V.K.

    ) 167-173 167 Elsevier Science Publishers B.V., Amsterdam Letter Section Abyssal sediment erosion in the Central Indian Basin: Evidence from radiochemical and radiolarian studies V.K. Banakar, S.M. Gupta and V.K. Padmavathi National Institute... of Oceanography, Dona-Paula, Goa-403 004, India (Revision accepted September 17, 1990) ABSTRACT Banakar, V.K., Gupta, S.M. and Padmavathi, V.K., 1991. Abyssal sediment erosion from the Central Indian Basin: Evi- dence from radiochemical and radiolarian studies...

  3. Use of ethyl-α-isonitrosoacetoacetate in the rapid estimation and radiochemical separation of gold

    International Nuclear Information System (INIS)

    Sawant, A.D.; Haldar, B.C.

    1978-01-01

    The use of ethyl-α-isonitrosoacetoacetate in the rapid estimation and radiochemical separation of gold is reported. As low as 5.00 mg of Au can be estimated with an accuracy better than 1%. Decontamination values against platinum metals and other metals usually associated with Au are greater than 10 5 . Isotopes and results are tabulated. The time required for radiochemical separation is around 20 min and the recovery of Au is better than 80%. γ-activities were measured with a single channel analyser and NaI(Tl) detector. β-activities were counted on a thin end-window type GM counter. (T.I.)

  4. The role of high performance liquid chromatography in radiochemical/radiopharmaceutical synthesis and quality assurance

    International Nuclear Information System (INIS)

    Boothe, T.E.; Emran, A.M.

    1990-01-01

    The usefulness of HPLC in all areas of radiopharmaceutics has been demonstrated in numerous laboratories, particularly in the development of in-house radiopharmaceuticals for SPECT and PET. HPLC continues to be a powerful tool in preparation and quality assurance (QA) as illustrated in such areas as chemical and radiochemical identification; product separation and isolation; preparative scale purification; and specific activity determination. A review of established HPLC techniques in radiopharmaceutics will be presented. Examples from the literature as well as newer applications will be used in an attempt to assess and define the present-day role of HPLC in the preparation of radiochemicals and radiopharmaceuticals with emphasis on QA

  5. Radiochemical methodologies applied to analytical characterization of low and intermediate level wastes from nuclear power plants

    International Nuclear Information System (INIS)

    Monteiro, Roberto Pellacani G.; Júnior, Aluísio Souza R.; Kastner, Geraldo F.; Temba, Eliane S.C.; Oliveira, Thiago C. de; Amaral, Ângela M.; Franco, Milton B.

    2017-01-01

    The aim of this work is to present radiochemical methodologies developed at CDTN/CNEN in order to answer a program for isotopic inventory of radioactive wastes from Brazilian Nuclear Power Plants. In this program some radionuclides, 3 H, 14 C, 55 Fe, 59 Ni, 63 Ni, 90 Sr, 93 Zr, 94 Nb, 99 Tc, 129 I, 235 U, 238 U, 238 Pu, 239 + 240 Pu, 241 Pu, 242 Pu, 241 Am, 242 Cm e 243 + 244 Cm, were determined in Low Level Wastes (LLW) and Intermediate Level Wastes (ILW) and a protocol of analytical methodologies based on radiochemical separation steps and spectrometric and nuclear techniques was established. (author)

  6. Analysis of 165Er excited state properties

    International Nuclear Information System (INIS)

    Morozov, V.A.; Budzynski, M.

    1982-01-01

    It is shown by the analysis of 165 Tm decay that the precision measurements of γ-ray and internal conversion electron intensities together with the measurements o.f angular correlation coefficients provide more data for the determination of γ-ray multipole composition and intensities of γ-transitions with small enerqy difference. The spin of the 589.868 ke tate is found to be I=1/2 - . Doublet transitions of different parity from the states 1103.495, 920.645 and 745.968 keV to the levels of the 590 keV region with energy difference ΔE=(108+-22) eV are identified

  7. Radiolabeling of anti-CD20 with Re-188 for treatment of Non-Hodgkin's lymphoma: radiochemical control

    International Nuclear Information System (INIS)

    Dias, C.R.; Osso Junior, J.A.

    2008-01-01

    Radioimmunotherapy (RIT) uses target-specific monoclonal antibodies or fragments labeled with a radioactive isotope to combine humoral and radiolytic functions and has the advantage of targeting not only the cell to which the antibody is bound but also the surrounding tumor cells and microenvironment. The most successful clinical studies of RIT in patients with Non-Hodgkin's Lymphoma (NHL) have targeted CD20+ Bcell tumors. Antibody therapy directed against the CD20 antigen on the surface of B-cells is considered one of the first successful target-specific therapies in oncology. The radionuclide rhenium-188 ( 188 Re) is currently produced from the father nuclide 188 W through a transportable generator system. Because of its easy availability and suitable nuclear properties (E βMAX = 2.1 MeV, t1/2 = 16.9 h, E γ = 155 keV), this radionuclide is considered an attractive candidate for application as therapeutic agent and could be conveniently utilized for imaging and dosimetric purposes. The objective of this work is the optimization of direct radiolabeling method of anti-CD20 with 188 Re using a liquid formulation. Anti-CD20 was reduced by incubation with 2-mercaptoethanol at room temperature. The number of resulting free sulphydryl groups was assayed with Ellman's reagent. Optimization of radiolabeling was achieved by varying parameters: antibody mass, reducing agent mass, tartrate mass, stability and reaction time, 188 Re volume and activity. Radiochemical purity of 188 Re-anti-CD20 was evaluated using instant thin layer chromatography-silica gel (ITLC-SG). Quality control methods for evaluation of radiochemical purity showed good labeling yield of the antibody but further studies will be carried out in order to improve the labeling yields and consequently the specific activity of the product. (author)

  8. Comparison of alkali fusion and acid digestion methods for radiochemical separation of Uranium from dietary samples

    International Nuclear Information System (INIS)

    Kamesh Viswanathan, B.; Arunachalam, Kantha D.; Sathesh Kumar, A.; Jayakrishana, K.; Shanmugamsundaram, H.; Rao, D.D.

    2014-01-01

    Several methods exist for separation and measurement of uranium in dietary samples such as neutron activation analysis (NAA), alpha spectrometric determination, inductively coupled plasma mass spectrometry (ICP-MS) and fluorimetry. For qualitative determination of activity, NAA and alpha spectrometry are said to be superior to evaluate the isotopes of uranium ( 238 U, 234 U and 235 U). In case of alpha spectrometry, the samples have to undergo radiochemical analysis for separation from other elements for uranium detection. In our studies, uranium was determined in food matrices by acid digestion (AD) and alkali fusion (AF) methods. The recovery yield of uranium in food matrices was compared in order to get consistent yield. The average activity levels of 238 U and 234 U in food samples were calculated based on recovery yield of 232 U in the samples. The average recovery of 232 U in AD method was 22 ± 8% and in AF method, it was 14.9 ± 1.3%. The spread is more in AD method than the AF method from their mean. The lowest recovery of 232 U was found in AF method. This is due to the interference of other elements in the sample during electroplating. Experimental results showed that the uranium separation by AD method has better recovery than the AF method. The consistency in recovery of 232 U was better for AF method, which was lower than the AD method. However, overall for both the methods, the recovery can be termed as poor and need rigorous follow up studies for consistently higher recoveries (>50%) in these type of biological samples. There are reports indicating satisfactory recoveries of around 80% with 232 U as tracer in the food matrices

  9. Spinorial analysis and physical properties of fermions

    International Nuclear Information System (INIS)

    Krechet, V.G.

    1987-01-01

    The authors study the formalism of covariant differentiation of a spinor field in a space of affine connection with an invariant metric. They find the most general formula for the coefficients of spinorial connection Gamma/sub α/ consistent with the fundamental relationship between the space and spin (γ/sub α/γ/sup β/ + γ/sub β/γ/sub α/ = 2g/sub αβ/), and which is a generalization of the formula for the Fock-Ivanenko coefficients. The obtained formula contains additional terms describing the interaction between the spinor field and the scalar field, the vector field A/sub α/, and the pseudovector field A/sub α/ (presumably, the pseudotrace of the spacetime torsion). The existence of these interaction terms also follows from the analysis of spinor fields from the gauge-theoretical point of view. They show that the interaction between the spinor and pseudovector fields found in this paper substantially modifies the electrodynamics of spinor fields

  10. Application of radiochemical neutron activation and atomic absorption spectrometry methods for the study of nutrition-pollution interactions in children

    Energy Technology Data Exchange (ETDEWEB)

    Tran Bang Diep [Institute for Nuclear Science and Technique, VAEC, P.O. Box 5T-160, Hanoi (Viet Nam)]. E-mail: tranfbangdiepj@yahoo.com; Tran Dai Nghiep [Institute for Nuclear Science and Technique, VAEC, P.O. Box 5T-160, Hanoi (Viet Nam)]. E-mail: tdnghiep@vaec.gov.vn

    2005-07-01

    The application of radiochemical neutron activation analysis (RNAA) and atomic absorption spectrometry (AAS) is expected to aid in understanding and evaluating the effects of environmental pollution on the nutritional status of children already exposed to marginal malnutrition. Samples of placenta, of low-weight and control newborns groups, were collected for determination of nutritional elements and pollutants. The mean ratios of pollutants and nutrients such as Cd/Zn, Hg/Se and Pb/Ca were evaluated for both groups. All these ratios in the placenta of the low-weight newborns are higher than that of the healthy group. The degree of the nutrient-pollutant interaction is evaluated by quantity R, with mercury considered as the most active pollutant while calcium the most active nutrient among the involved elements in process of the interaction. (author)

  11. Application of radiochemical neutron activation and atomic absorption spectrometry methods for the study of nutrition-pollution interactions in children

    International Nuclear Information System (INIS)

    Tran Bang Diep; Tran Dai Nghiep

    2005-01-01

    The application of radiochemical neutron activation analysis (RNAA) and atomic absorption spectrometry (AAS) is expected to aid in understanding and evaluating the effects of environmental pollution on the nutritional status of children already exposed to marginal malnutrition. Samples of placenta, of low-weight and control newborns groups, were collected for determination of nutritional elements and pollutants. The mean ratios of pollutants and nutrients such as Cd/Zn, Hg/Se and Pb/Ca were evaluated for both groups. All these ratios in the placenta of the low-weight newborns are higher than that of the healthy group. The degree of the nutrient-pollutant interaction is evaluated by quantity R, with mercury considered as the most active pollutant while calcium the most active nutrient among the involved elements in process of the interaction. (author)

  12. Determination of Sr, Ba, Rb, and Cs in biological reference materials using a radiochemical NAA group separation procedure

    International Nuclear Information System (INIS)

    Mizera, J.; Randa, Z.

    2008-01-01

    Strontium, barium, rubidium, and cesium in selected, predominantly biological, reference materials (NIST 1515, 1547, 1549, 1566a, 1571, 1577b, 2704, CTA-OTL-1, and Bowen's Kale) were determined using neutron activation analysis (NAA) in two different analytical modes - instrumental NAA with epithermal neutrons (ENAA), and NAA with radiochemical group separation of Sr-Ba and Rb-Cs (RNAA). The ENAA mode was based on long-term (5 h) irradiation of samples in a Cd shielding. The RNAA procedure was based on long-term (20 h) irradiation of samples, their decomposition / dissolution by alkaline-oxidative fusion, and precipitation of Sr and Ba sulfates, and sorption of Rb and Cs onto ammonium phosphomolybdate (APM). Both methods provided element contents in the analyzed reference materials consistent with certified and/or literature values. (author)

  13. On the radiochemical purity of elementary 35S with high specific activity

    International Nuclear Information System (INIS)

    Todorovsky, D.S.; Kostadinov, K.N.; Efremova, Yu.N.

    1979-01-01

    Radiochemical composition and chemical changes with increasing storage time of benzene solutions and of solid species of elementary 35 S with high specific activity are studied. The dependence of the stability on the specific activity and the radioactive concentration is shown and some tentative limits are given for permissible storage periods. (author)

  14. Determination of the radiochemical purity of phosphorus-32 and tritium-labeled diisopropylphosphorofluoridate (DFP)

    International Nuclear Information System (INIS)

    Christopher, R.E.; Sheppard, G.

    1975-01-01

    A method is described for the determination of the radiochemical purity of labeled diisopropylphosphorofluoridate (DFP), based on the irreversible inhibition reaction with the enzyme α-chymotrypsin. The nature of the impurities in commercially available 32 P- and 3 H-labeled DFP is discussed

  15. Radiochemical assay for determination of dihydropyrimidinase activity using reversed-phase high-performance liquid chromatography

    NARCIS (Netherlands)

    van Kuilenburg, A. B.; van Lenthe, H.; van Gennip, A. H.

    1999-01-01

    A radiochemical assay was developed to measure the activity of dihydropyrimidinase (DHP) in human liver homogenates. The method is based on the separation of radiolabeled dihydrouracil from N-carbamyl-beta-alanine by HPLC with on-line detection of radioactivity combined with detection of 14CO2 by

  16. Rapid and sensitive enzymatic-radiochemical assay for the determination of triglycerides

    International Nuclear Information System (INIS)

    Khoo, J.C.; Miller, E.; Goldberg, D.I.

    1987-01-01

    An enzymatic-radiochemical method suitable for the determination of triglyceride levels of cells in culture is described. The method is based on the enzymatic hydrolysis of triglycerides to free fatty acids which then complex with 63 Ni. The method is rapid, accurate, and inexpensive. The procedure extends the sensitivity of triglyceride measurement to as low as 0.25 nanomoles

  17. Triphenyl phosphine oxide as a substoichiometric radiochemical reagent: Determination of thallium

    International Nuclear Information System (INIS)

    Reddy, P.C.; Polaiah, B.; Rangamannar, B.

    1991-01-01

    A rapid radiochemical method has been developed for the determination of microgram amounts of thallium based on the substoichiometric extraction of its ocmplex with triphenylphosphine oxide into benzene from 6 M sulphuric acid. 10-90 μg of thallium was determined with an average error of 2.06%. The effect of diverse metal ions on the extraction was studied. (orig.)

  18. Computer aided piping layout design in radiochemical plants- an improved software package

    International Nuclear Information System (INIS)

    Raju, R.P.; Siddiqui, H.R.

    1995-01-01

    A software package was developed and it was successfully implemented for the piping layout design of the four process cells of the Kalpakkam Reprocessing Project. This paper discusses in detail all the improvements and modifications that are being carried out in the package so that it becomes more meaningful and useful for implementation for the forthcoming radiochemical plants

  19. Evaluation of radiochemical purities of some radiopharmaceuticals in Shiraz Namazi teaching hospital

    Directory of Open Access Journals (Sweden)

    Hossein Sadeghpour

    2015-03-01

    Full Text Available Many radiopharmaceuticals, as a special group of drugs, are eventually prepared at the nuclear medicine departments of the hospitals. Therefore, their quality control procedures such as sterility tests, radionuclide, radiochemical and chemical purity should be carried out in the hospitals. In this study, radiochemical purity for more than 300 preparations of three different radiopharmaceutical formulations from commercial kits were tested using instant thin layer chromatography. The formulations 99mTc-DTPA, 99mTc-MDP and 99mTc-MIBI were obtained from Pars Isotope Co. Several paper chromatographic systems including standard and factory recommended thin layer chromatography systems were used in this study. In addition different equipments for detection of radioactivity in paper chromatography like gamma camera and dose calibrator were used. The results showed that the most observed impurities were hydrolyzed reduced technetium (HR-Tc. There were no significant differences between calculated 99mTc-MIBI radiochemical purities when the radioactive detection device was gamma camera instead of dose calibrator. In case of 99mTc-DTPA and 99mTc-MDP, there were significant differences in detection of HR-Tc. On the contrary, no significant differences in free pertechnetate were observed when package insert procedures for quality control were used instead of those recommended in the references. Finally, we observed that the package insert procedures for quality control can offer higher radiochemical purities.

  20. Radiochemical separation and alpha-spectrometric determination of Americium in different matrixes

    International Nuclear Information System (INIS)

    Radenkovic, M.; Joksic, J.; Paligoric, D.

    2009-01-01

    A method of separation and alpha-spectrometric determination of americium, developed in VINCA Institute of Nuclear Sciences is described in the paper. The procedure is convenient to be used for 241 Am determination in environmental matrixes as well as samples of human origin if a very small concentrations are expected, using 243 Am as a tracer for radiochemical yield recovery. (author) [sr

  1. Analytical and radiochemical methods in the stability study of the MIBI-Sm

    International Nuclear Information System (INIS)

    Isaac, M.; Leyva, R.; Gamboa, R.; Turino, D.

    1997-01-01

    99mT c-MIBI is a radiopharmaceutical imaging agent useful for assessing myocardial perfusion. This paper presents the stability results obtained in the radiochemical purity and others parameters in the quality control of 5 batch during more than 2 years

  2. Protein binding studies with radiolabeled compounds containing radiochemical impurities. Equilibrium dialysis versus dialysis rate determination

    DEFF Research Database (Denmark)

    Honoré, B

    1987-01-01

    The influence of radiochemical impurities in dialysis experiments with high-affinity ligands is investigated. Albumin binding of labeled decanoate (97% pure) is studied by two dialysis techniques. It is shown that equilibrium dialysis is very sensitive to the presence of impurities resulting...

  3. Physicochemical properties of different corn varieties by principal components analysis and cluster analysis

    International Nuclear Information System (INIS)

    Zeng, J.; Li, G.; Sun, J.

    2013-01-01

    Principal components analysis and cluster analysis were used to investigate the properties of different corn varieties. The chemical compositions and some properties of corn flour which processed by drying milling were determined. The results showed that the chemical compositions and physicochemical properties were significantly different among twenty six corn varieties. The quality of corn flour was concerned with five principal components from principal component analysis and the contribution rate of starch pasting properties was important, which could account for 48.90%. Twenty six corn varieties could be classified into four groups by cluster analysis. The consistency between principal components analysis and cluster analysis indicated that multivariate analyses were feasible in the study of corn variety properties. (author)

  4. Molecular structure based property modeling: Development/ improvement of property models through a systematic property-data-model analysis

    DEFF Research Database (Denmark)

    Hukkerikar, Amol Shivajirao; Sarup, Bent; Sin, Gürkan

    2013-01-01

    models. To make the property-data-model analysis fast and efficient, an approach based on the “molecular structure similarity criteria” to identify molecules (mono-functional, bi-functional, etc.) containing specified set of structural parameters (that is, groups) is employed. The method has been applied...

  5. Testing the radiochemical purity of a radiopharmaceutical: study of 99mTc-Tetrofosmin (Myoview)

    International Nuclear Information System (INIS)

    Moati, F.; Quartarone, C.; Jourdain, J.R.; Rizzo, N.; Dumont, A.; De Beco, V.; Ait Ben Ali, S.; Lours, S.; Piketty, M.L.; Izembart, M.; Goudou, C.; Lemercier, V.; Schlageter, M.H.; Moretti, J.L.; Progent, A.

    1997-01-01

    The goal of this study is to optimize the testing method of radiochemical purity (RCP) of 99m Tc-Tetrofosmin proposed by the Amersham Company: thin-layer chromatography (TLC); ITLC-SG support, migration on 15 Cm; acetone-dichloromethane mobile phase, (35/65, v/v), This technique allows separating the reduced-Tc (Rf = 0), the TcO 4 - (Rf = 1), and in intermediary position (0.2 99m Tc-Tetrofosmin. The results of RCP depend on working conditions, particularly, on the volume of deposit (10 to 20 μl, expected). If the deposited is too small, the 99m Tc-Tetrofosmin does not migrate. With a volume of 20 μl, the separation is weak and the peak width is un-resolvable. The results obtained correspond to the following operational conditions: migration on 8 cm; deposit of 8 to 10 μl; no drying. In these conditions the peak of 99m Tc-Tetrofosmin is well singled out: migration Rf of 0.375 to 0.625. These results have been obtained by the analysis of radio-chromatographic peak. Every strip has been cut cm by cm and the activity was measured by a gamma counter. Repeatability of the method on a series of 8 tests is good: average RCP 93.22%, mean value = 93.24%. The reproducibility was realized by measuring directly by the activity-meter the activity corresponding to 3 identifiable peaks: Reduced Tc (Rf 4 - (Rf 99m Tc-Tetrofosmin (0.25 < Rf < 0.75). On the 21 effectuated tests the inter-test RCP reproducibility was good: average value = 95.24%, CV = 2.07%, mean value 95.3%). In conclusion, the miniaturization improves the separation by Myoview (0.25 < Rf < 0.75), diminishes the migration time by a factor 4 and lowers the reactive cost of testing by 50%

  6. Estimation and Uncertainty Analysis of Flammability Properties of Chemicals using Group-Contribution Property Models

    DEFF Research Database (Denmark)

    Frutiger, Jerome; Abildskov, Jens; Sin, Gürkan

    Process safety studies and assessments rely on accurate property data. Flammability data like the lower and upper flammability limit (LFL and UFL) play an important role in quantifying the risk of fire and explosion. If experimental values are not available for the safety analysis due to cost...... or time constraints, property prediction models like group contribution (GC) models can estimate flammability data. The estimation needs to be accurate, reliable and as less time consuming as possible. However, GC property prediction methods frequently lack rigorous uncertainty analysis. Hence....... In this study, the MG-GC-factors are estimated using a systematic data and model evaluation methodology in the following way: 1) Data. Experimental flammability data is used from AIChE DIPPR 801 Database. 2) Initialization and sequential parameter estimation. An approximation using linear algebra provides...

  7. Mechanical Properties for Reliability Analysis of Structures in Glassy Carbon

    CERN Document Server

    Garion, Cédric

    2014-01-01

    Despite its good physical properties, the glassy carbon material is not widely used, especially for structural applications. Nevertheless, its transparency to particles and temperature resistance are interesting properties for the applications to vacuum chambers and components in high energy physics. For example, it has been proposed for fast shutter valve in particle accelerator [1] [2]. The mechanical properties have to be carefully determined to assess the reliability of structures in such a material. In this paper, mechanical tests have been carried out to determine the elastic parameters, the strength and toughness on commercial grades. A statistical approach, based on the Weibull’s distribution, is used to characterize the material both in tension and compression. The results are compared to the literature and the difference of properties for these two loading cases is shown. Based on a Finite Element analysis, a statistical approach is applied to define the reliability of a structural component in gl...

  8. An Analysis of the Real Estate Property Managing Occupation.

    Science.gov (United States)

    Bryan, James E.

    The general purpose of the occupational analysis is to provide workable, basic information dealing with the many and varied duties performed in the real estate property manager occupation. The document opens with a brief introduction followed by a job description. The bulk of the document is presented in table form. Eleven duties are broken down…

  9. Analysis of optimum density of forest roads in rural properties

    Directory of Open Access Journals (Sweden)

    Flávio Cipriano de Assis do Carmo

    2013-09-01

    Full Text Available This study analyzed the density of roads in rural properties in the south of the Espírito Santo and compared it with the calculation of the optimal density in forestry companies in steep areas. The work was carried out in six small rural properties based on the costs of roads of forest use, wood extraction and the costs of loss of productive area. The technical analysis included time and movement study and productivity. The economic analysis included operational costs, production costs and returns for different scenarios of productivity (180m.ha-1, 220m.ha-1and 250 m.ha-1. According to the results, all the properties have densities of road well above the optimum, which reflects the lack of criteria in the planning of the forest stands, resulting in a inadequate use of plantation area. Property 1 had the highest density of roads (373.92 m.ha-1 and the property 5 presented the lowest density (111.56 m.ha-1.

  10. OPERATIONAL EXPERIENCE: UPGRADED MPC AND A SYSTEMS FOR THE RADIOCHEMICAL PLANT OF THE SIBERIAN CHEMICAL COMBINE

    International Nuclear Information System (INIS)

    RODRIGUEZ, C.; GOLOSKOKOV, I.; FISHBONE, L.; GOODEY, K.; LOOMIS, M.; CRAIN, B. JR.; LARSEN, R.

    2003-01-01

    The success of reducing the risk of nuclear proliferation through physical protection and material control/accounting systems depends upon the development of an effective design that includes consideration of the objectives of the systems and the resources available to implement the design. Included among the objectives of the design are facility characterization, definition of threat, and identification of targets. When considering resources, the designer must consider funds available, rapid low-cost elements, technology elements, human resources, and the availability of resources to sustain operation of the end system. The Siberian Chemical Combine (SCC) is a multi-function nuclear facility located in the Tomsk region of Siberia, Russia. Beginning in 1996, SCC joined with the United States Department of Energy (US/DOE) Material Protection, Control, and Accounting (MPC and A) Program to develop and implement MPC and A upgrades for the Radiochemical, Chemical Metallurgical, Conversion, Uranium Enrichment, and Reactor Plants of the SCC. At the Radiochemical Plant the MPC and A design and implementation process has been largely completed for the Plutonium Storage Facility and related areas of the Radiochemical Plant. Design and implementation of upgrades for the Radiochemical Plant include rapid physical protection upgrades such as bricking up of doors and windows, and installation of security-hardened doors. Rapid material control and accounting upgrades include installation of modern balances and bar code equipment. Comprehensive MPC and A upgrades include the installation of access controls to sensitive areas of the Plant, alarm communication and display (AC and D) systems to detect and annunciate alarm conditions, closed circuit (CCTV) systems to assess alarm conditions, central and secondary alarm station upgrades that enable security forces to assess and respond to alarm conditions, material control and accounting upgrades that include upgraded physical

  11. Scientific and technical conference. Problems and horizons of development of chemical and radiochemical control in nuclear energetics. Collection of summaries of reports

    International Nuclear Information System (INIS)

    2001-01-01

    During scientific and technical conference on problems of development of chemical and radiochemical control in nuclear energetics following themes were considered: the problems of methodological and instrumental assurance of chemical and radiochemical control at working nuclear power plants and nuclear energetic units; modern conceptions of automation systems construction of chemical and radiochemical control on the basis of intellectual measuring channels; the ways of decision of generally system problems of organization and management of chemical and radiochemical control using computed technologies; the problems of certification of chemical and radiochemical methods of measuring in nuclear energetics [ru

  12. Radiochemical Separation and Quantification of Tritium in Metallic Radwastes Generated from CANDU Type NPP - 13279

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, H.J.; Choi, K.C.; Choi, K.S.; Park, T.H.; Park, Y.J.; Song, K. [Korea Atomic Energy Research Institute, P.O. Box 105, Yuseong, Daejeon, 305-330 (Korea, Republic of)

    2013-07-01

    As a destructive quantification method of {sup 3}H in low and intermediate level radwastes, bomb oxidation, sample oxidation, and wet oxidation methods have been introduced. These methods have some merits and demerits in the radiochemical separation of {sup 3}H radionuclides. That is, since the bomb oxidation and sample oxidation methods are techniques using heating at high temperature, the separation methods of the radionuclides are relatively simple. However, since {sup 3}H radionuclide has a property of being diffused deeply into the inside of metals, {sup 3}H which is distributed on the surface of the metals can only be extracted if the methods are applied. As an another separation method, the wet oxidation method makes {sup 3}H oxidized with an acidic solution, and extracted completely to an oxidized HTO compound. However, incomplete oxidized {sup 3}H compounds, which are produced by reactions of acidic solutions and metallic radwastes, can be released into the air. Thus, in this study, a wet oxidation method to extract and quantify the {sup 3}H radionuclide from metallic radwastes was established. In particular, a complete extraction method and complete oxidation method of incomplete chemical compounds of {sup 3}H using a Pt catalyst were studied. The radioactivity of {sup 3}H in metallic radwastes is extracted and measured using a wet oxidation method and liquid scintillation counter. Considering the surface dose rate of the sample, the appropriate size of the sample was determined and weighed, and a mixture of oxidants was added to a 200 ml round flask with 3 tubes. The flask was quickly connected to the distilling apparatus. 20 mL of 16 wt% H{sub 2}SO{sub 4} was given into the 200-ml round flask through a dropping funnel while under stirring and refluxing. After dropping, the temperature of the mixture was raised to 96 deg. C and the sample was leached and oxidized by refluxing for 3 hours. At that time, the incomplete oxidized {sup 3}H compounds were

  13. Single patient doses of {sup 99m}Tc-HDP: Assessment of radiochemical purity, sterility and extractables from a polypropylene syringe over six hours

    Energy Technology Data Exchange (ETDEWEB)

    Parkes, S.L.; Varelis, P. [St George Hospital, Kogarah, NSW (Australia). Department of Nuclear Medicine

    1997-12-01

    Full text: The purpose of this investigation was to determine the radiochemical purity (RCP), sterility and extractables for {sup 99m}Tc oxidronate ({sup 99m}Tc-HDP) stored in polypropylene syringes over < six-hour period. The radiochemical purity was determined using a two-strip ITLC procedure, performed at time 0, 1, 2, 4, 6 hours. The sterility and endotoxin levels were tested by a NATA accredited laboratory, after allowing the radiopharmaceutical to stand at room temperature for six hours in the syringes. Plasticisers and other likely compounds that could be extracted from the syringes into the aqueous solution were determined by high pressure liquid chromatography (HPLC) diode array detection. This analysis involved shaking normal saline in a syringe over night and then injecting an aliquot of this solution onto a C18 analytical column and monitoring the effluent at 200 and 253 nm. The radiochemical purity of {sup 99m}Tc-HDP did not significantly change over the course of the study and remained above the recommended RCP for this radiopharmaceutical. Furthermore, at six hours the RCP of {sup 99m}Tc-HDP stored in both the manufacturer`s vial and a syringe were identical. Sterility testing of {sup 99m}Tc-HDP stored in syringes showed no microbial growth and less than 10 endotoxin units/mL (pass). The HPLC analysis did not show the presence of any extraneous compounds in the aqueous solution. Single patient doses of {sup 99m}Tc-HDP stored in polypropylene syringes over a six-hour period fulfill all the quality control requirements for administration to humans.

  14. Distribution of plutonium in organs of extrapulmonary pool in remote periods after the beginning of inhalation in workers of radiochemical plant

    International Nuclear Information System (INIS)

    Suslova, K.G.; Khokhryakov, V.F.; Tokarskaya, Z.B.; Kudryavtseva, T.I.; Nifatov, A.P.

    2000-01-01

    Influence of the health state and some dosimetric factors on the distribution of systemic Pu for workers of radiochemical plants is studied. Data were obtained on results of radiochemical analysis of soft tissue and bone samples taken at autopsy from 591 workers of the radiochemical plant. Alpha activity was measured with a low background alpha-radiometer. The patho-morphological state of the liver was taken into account. It is shown that the health state and the grade of the pathological process have an effect upon distribution of systemic Pu in humans. Skeleton to liver ratio is 50.3 : 42.3 = 1.2 for the practically healthy people. As the state of the health worsens and the pathology becomes more scenic, resulting in the fatty degeneration in the hepatocytes, the fractions of Pu deposition in liver decreases, while the fraction in the skeleton increases in the same degree. The individuals with serious liver diseases (cancer, massive metastases in the liver, cirrhosis, alcoholism) have got the ratio the skeleton : the liver = 77.9 : 14.9 = 5.5. The correlation between the state of the state of the health, some domestic factor and the distribution of systemic Pu was studied using the multifactorial regression analysis. These results indicated that Pu redistribution between the liver and the skeleton is the reciprocal process. Under pathological processes the element released from the liver is transported to the skeleton. The intensity of Pu translocation from the liver to the skeleton is higher under pathological processes (28 % for 1 - 2 years) than under the normal life conditions (1.4 % y -1 ). It should be assumed that for the persons with different heavy chronic diseases the skeleton and liver exposure doses may differ from the calculated ones, if the doses are evaluated from the models that do not take into account the plutonium recycling in systemic organs under the pathological processes [ru

  15. Radiochemical preparation of PAAM hydrogels and their usage in agriculture

    International Nuclear Information System (INIS)

    Yousefzadeh, P.; Khajavi, M.; Sohrabpour, M.

    1994-01-01

    The polyacrylamide (PAAm) hydrogels are crosslinked polymers and have the interesting ability to release the retained additives to the surrounding media in a controlled manner. This property in turn may have application in agriculture (fertilizers, pesticides) or in medicine, etc. In this study PAAm aqueous solutions were irradiated by varying doses to find the optimum gelation dose and to investigate the following: 1. Radiation induced crosslinking of PAAm. 2. Effect of additives' concentration on the degree of crosslinking. 3. Measurement of the release rate of the additives (pesticides, microelements) versus different soil type and the gel granule size. The results show that the release rate of the additives is not a function of soil type but it rather depends on the background moisture content as well as on the hydrogel particle size. (author)

  16. Radiochemical ageing of epoxy coating for nuclear plants

    International Nuclear Information System (INIS)

    Queiroz, D.P.R.; Fraisse, F.; Fayolle, B.; Kuntz, M.; Verdu, J.

    2010-01-01

    The degradation of an epoxy-amine network exposed to gamma irradiation in oxygen atmosphere has been studied by using a variety of analytical methods, including infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and sol-gel analysis. Results show that the oxidation of epoxy systems grows with the irradiation dose. Hydroperoxides, which are species resulting from oxidation, were identified and quantified by DSC. As indicated by the sol-gel analysis, the mechanism of degradation of chain scission seems to be predominant over crosslinking. The modifications induced by irradiation reflect in a greater capacity of water absorption.

  17. Slifers revisited: a method for determining yields independent of radiochemical measurements

    International Nuclear Information System (INIS)

    Rambo, J.T.

    1976-01-01

    It would be very desirable if an independent method other than radiochemical measurement were available to determine the yields of low-yield events in the alluviums and tuffs of areas 2, 9, and 10 at the Nevada Test Site. The successful application of slifers to the measurement of yields from high-yield events suggests that under some conditions they may also be usable with low-yield events. This view is supported by the evidence discussed here, which is based on direct experience with slifer yield measurements for low-yield events in porous media. Suggested methods for improving slifer yield determinations and a method for determining yields independent of radiochemical measurements are offered

  18. Radiochemical methodologies applied to analytical characterization of low and intermediate level wastes from nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Monteiro, Roberto Pellacani G.; Júnior, Aluísio Souza R.; Kastner, Geraldo F.; Temba, Eliane S.C.; Oliveira, Thiago C. de; Amaral, Ângela M.; Franco, Milton B., E-mail: rpgm@cdtn.br, E-mail: reisas@cdtn.br, E-mail: gfk@cdtn.br, E-mail: esct@cdtn.br, E-mail: tco@cdtn.br, E-mail: ama@cdtn.br, E-mail: francom@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2017-07-01

    The aim of this work is to present radiochemical methodologies developed at CDTN/CNEN in order to answer a program for isotopic inventory of radioactive wastes from Brazilian Nuclear Power Plants. In this program some radionuclides, {sup 3}H, {sup 14}C, {sup 55}Fe, {sup 59}Ni, {sup 63}Ni, {sup 90}Sr, {sup 93}Zr, {sup 94}Nb, {sup 99}Tc, {sup 129}I, {sup 235}U, {sup 238}U, {sup 238}Pu, {sup 239}+{sup 240}Pu, {sup 241}Pu, {sup 242}Pu, {sup 241}Am, {sup 242}Cm e {sup 243}+{sup 244}Cm, were determined in Low Level Wastes (LLW) and Intermediate Level Wastes (ILW) and a protocol of analytical methodologies based on radiochemical separation steps and spectrometric and nuclear techniques was established. (author)

  19. Requirement of radiochemical recovery determination for gross alpha and gross beta estimation in drinking water

    International Nuclear Information System (INIS)

    Raveendran, Nanda; Rao, D.D.; Hegde, A.G.

    2010-01-01

    Presence of radionuclides in drinking water which emits Alpha and Beta particles are the potential sources of internal exposure in drinking water. Gross alpha and gross beta determination in drinking water and packaged drinking water (PDW) as per BIS (Bureau of Indian standards) standards is discussed here. The methods have been tested to account for losses in the radiochemical procedures using radionuclides such as 137 Cs, 90 Sr, 226 Ra, 239 Pu, 243 Am, 232 U. The methods have also been validated in an IAEA proficiency test conducted during 2009. Monitoring of gross alpha and gross beta activity observed in drinking water/packaged drinking water from various states of India were within the limits set by BIS. Average radiochemical recoveries of 84% and 63% were obtained for gross α and gross β respectively. (author)

  20. Radiochemical syntheses further radiopharmaceuticals for positron emission tomography and new strategies for their production

    CERN Document Server

    Kilbourn, Michael R; Kilbourn, Michael R

    2015-01-01

    This book describes methods and procedures for preparing PET radiopharmaceuticals, and highlights new methods for conducting radiochemical reactions with carbon-11 (C11) and fluorine-18 (F18), which are two of the most commonly used radionuclides in positron emission tomography (PET) imaging.     Provides reliable methods for radiochemical syntheses and reactions, including all essential information to duplicate the procedure     Eliminates the time-consuming process of searching journal articles and extracting pertinent details from lengthy experimental sections or supporting information     Focuses on an emerging and important area for pharmaceutical and medical applications     Encompasses technical, regulatory, and application aspects     Includes solid-phase radiochemistry, transition-metal catalyzed radiochemistry, microfluidics, click chemistry, green radiochemistry and new strategies for radiopharmaceutical quality control.

  1. RADCHEM - Radiochemical procedures for the determination of Sr, U, Pu, Am and Cm

    Energy Technology Data Exchange (ETDEWEB)

    Sidhu, R. [Inst. for Energy Technology (Norway)

    2006-04-15

    An accurate determination of radionuclides from various sources in the environment is essential for assessment of the potential hazards and suitable countermeasures both in case of accidents, authorised release and routine surveillance. Reliable radiochemical separation and detection techniques are needed for accurate determination of alpha and beta emitters. Rapid analytical methods are needed in case of an accident for early decision-making. The objective of this project has been to compare and evaluate radiochemical procedures used at Nordic laboratories for the determination of strontium, uranium, plutonium, americium and curium. To gather detailed information on the procedures in use, a questionnaire regarding various aspects of radionuclide determination was developed and distributed to all (sixteen) relevant laboratories in the Nordic countries. The response and the procedures used by each laboratory were then discussed between those who answered the questionnaire. This report summaries the findings and gives recommendation on suitable practice. (au)

  2. Leakage evaluation in the PCV (Primary Containment Vessel) using chemical and radiochemical data

    International Nuclear Information System (INIS)

    Maeda, Katsuji; Nagasawa, Katsumi

    1998-01-01

    Keeping the reliability of nuclear power plant operation, the primary coolant leakage in the PCV is strictly restricted by the Technical Specifications. It is very important to detect an indication of leakage and estimate the source of leakage to provide countermeasures. Usually the indication of leakage will be detected by increase of drain flow in the PCV sump. There are some possibilities of leakage sources in the PCV, such as reactor water, main steam, condensate, feedwater and closed cooling water. The leakage source contain different chemical and radiochemical species. This means that the leakage source can be presumed and detected by using chemical information from the PCV atmosphere and sump water. To detect the leakage indication and the source quickly and exactly, the PCV Leakage Detection Expert System has been developed. This paper describes how to evaluate the leakage indication and source in the PCV by using chemical and radiochemical data. (author)

  3. RADCHEM - Radiochemical procedures for the determination of Sr, U, Pu, Am and Cm

    International Nuclear Information System (INIS)

    Sidhu, R.

    2006-04-01

    An accurate determination of radionuclides from various sources in the environment is essential for assessment of the potential hazards and suitable countermeasures both in case of accidents, authorised release and routine surveillance. Reliable radiochemical separation and detection techniques are needed for accurate determination of alpha and beta emitters. Rapid analytical methods are needed in case of an accident for early decision-making. The objective of this project has been to compare and evaluate radiochemical procedures used at Nordic laboratories for the determination of strontium, uranium, plutonium, americium and curium. To gather detailed information on the procedures in use, a questionnaire regarding various aspects of radionuclide determination was developed and distributed to all (sixteen) relevant laboratories in the Nordic countries. The response and the procedures used by each laboratory were then discussed between those who answered the questionnaire. This report summaries the findings and gives recommendation on suitable practice. (au)

  4. Rapid radiochemical methods for preparation of sup(99m)Tc labelled compounds

    International Nuclear Information System (INIS)

    Narasimhan, D.V.S.; Banodkar, S.M.; Kothari, K.; Mani, R.S.

    1981-01-01

    Several inorganic and organic compounds incorporating sup( 99 m)Tc are being extensively used for imaging various body organs. The preparation of these sup( 99 m)Tc compounds with the necessary purity requirements is carried out by controlled reduction of sup( 99 m)Tc-pertechnetate using Sn(II) ions as the reducing agent followed by complexation with various active ingredients. The authors here present procedures developed at Radiopharmaceuticals Section of BARC for preparing sup( 99 m)Tc-diphosphonate, sup( 99 m)Tc-glucoheptonate, sup( 99 m)Tc-albumin microspheres and sup( 99 m)Tc-phytate with high radiochemical purity. The paper also describes procedures for the preparation of freeze-dried kits for single step preparation of these compounds. The paper also describes the authors' experience with various analytical procedures for the determination of radiochemical purity of these preparations. (author)

  5. Rapid radiochemical separation of short-lived radionuclides in neutron-activated samples

    International Nuclear Information System (INIS)

    Fardy, J.

    1985-11-01

    Radiochemical separation procedures based on the removal of metal ions by columns of C 18 -bonded silica gel after selective complexation are examined and the simplicity of the method demonstrated by its application to determination of Mn, Cu and Zn in neutron-activated biological material from the following solutions (pH 0-10, sulphate concentration 0,18M and 1,44M SO 4 ): 8-hydroxyquinoline (oxine), ammonium pyrrolidinedithiocarbamate (APDC), cupferron (CUP), 1-(2-pyridylazo)-2-naphthol (PAN), 1-(2'-thiazolylazo)-2-naphthol (TAN), 4-(2-pyridylazo) resorcinol (PAR), diethylammonium diethyldithiocarbamate (DDC), potassium ethyl xanthate (PEX), acetylacetone (AcAc) or thenoyltrifluoracetone (TTA). The method is rapid and reliable and readily adaptable in all radiochemical laboratories

  6. Radiochemical separation of actinides for their determination in environmental samples and waste products

    Energy Technology Data Exchange (ETDEWEB)

    Gleisberg, B [Nuclear Engineering and Analytics Rossendorf, Inc. (VKTA), Dresden (Germany)

    1997-03-01

    The determination of low level activities of actinides in environmental samples and waste products makes high demands on radiochemical separation methods. Artificial and natural actinides were analyzed in samples form the surrounding areas of NPP and of uranium mines, incorporation samples, solutions containing radioactive fuel, solutions and solids resutling from the process, and in wastes. The activities are measured by {alpha}-spectrometry and {gamma}-spectrometry. (DG)

  7. Study of performance characteristics of a radiochemical method to determine uranium in biological samples

    International Nuclear Information System (INIS)

    Puga, Maria J.; Cerchietti, Maria L.R.; Prudenzo, J.E.; Arguelles, Maria G.

    2005-01-01

    In this paper is described a methodology to calculate detection limit (Ld), quantification level (Lq) and minimum detectable activity (MDA) in a radiochemical method for determination of uranium in urine samples. The concentration is measured by fluorimetry and alpha gross activity using liquid scintillation counting (LSC). The calculation of total propagated uncertainty on a spike sample is presented. Furthermore, the major sources of uncertainty and percentage contribution in both measurements are assessed. (author)

  8. New radiochemical methods for determination of 237Np a 241Pu using extraction chromatography (Presentation)

    International Nuclear Information System (INIS)

    Strisovska, J.

    2013-01-01

    Thesis was focused on the development of a new methodology for the separation of anthropogenic transuranium radionuclides 237 Np a 241 Pu from different kinds of matrices. The analytical methods used in this study were based on extraction chromatography and were optimized according to the sample type. The proposed radiochemical procedure is a combination of two algorithms, which represent the separation of radionuclides by using extraction chromatographic sorbents TEVA resin and TRU resin supplied by Eichrom Technologies LLC. 239 Np a 237 Np were selectively captured on sorbent TEVA resin in oxidation state 4+. TRU resin was used for purification of plutonium fraction from interfering americium radionuclide. 242 Pu and 239 Np radionuclides as tracers have been used to monitor the radiochemical yields of separation. Before every radiochemical separation tracer radionuclide 239 Np was obtained by separation from the parent radionuclide 2 43 Am, which is in radioactive equilibrium to 239 Np. The average yield of chemical separation was 69,3% for 239 Np at 277 keV energy line and 65,9% at 228 keV energy line. The NPL AH-B08069 (2008) samples which consist of the mixture of alpha-radionuclides were used for the modification and optimization of separation method used for separation of Np and Pu in model samples. This method provided high radiochemical yields of 239,240 Pu (95,0 ± 3,5)% and 237 Np (87,9 ± 3,0)%.. Reliability of the method was verified by applying our modified separation procedures on reference materials IAEA-375 and IAEA-414 supplied by International Atomic Energy Agency. A good agreement between the results is obtained by this procedure and the certified values were found. Samples of contaminated soils from the area of Nuclear power plant A-1 Jaslovske Bohunice which is stored temporarily before disposal were analyzed using developed separation procedure. Specific activity of investigated radionuclides was determined in these samples. (author)

  9. A radiochemical technique for the determination of mercury in drinking water

    International Nuclear Information System (INIS)

    Ahmad, S.; Chaudhri, M.S.; Qureshi, I.H.

    1982-01-01

    A radiochemical method for the separation and determination of mercury in drinking water has been developed. The radionuclides of mercury formed after neutron irradiation of the sample were separated by liquid/liquid extraction using PAN and TBA mixture in chloroform from aqueous nitric acid medium. Quantitative extraction of mercury was achieved in a single step and the equilibrium was attained within five minutes. (orig.)

  10. Safety decommissioning regulations of radiochemical objects - the problem, requires urgent decision

    International Nuclear Information System (INIS)

    Rovnyj, S.I.; Arsent'eva, N.V.; Emel'yanov, N.M.; Kolesnikov, V.N.

    2001-01-01

    The necessity of planning and pursuance of the measures on decommissioning of radiochemical industry is discussed. Technological processes were stopped more than in 30 buildings and constructions of the PO Mayak. The characteristics of the technological buildings to be decommissioned were treated in the context of building peculiarities, function, character and level of contamination. An acceptable variant for reactor decommissioning invites development of the standard-legal aspects [ru

  11. Radiochemical determination and separation or total radium, 226Ra and 224Ra

    International Nuclear Information System (INIS)

    Suarez, J. A.; Gonzalez, J. A.; Pablo, M. A. de

    1987-01-01

    Radiochemical purification and separation of radium has been carried out and the determination of total radium solubilized in aqueous samples has been studied assuming that all the alpha emitters of the sample have their origin in the 226Ra and elements of its desintegration chain. Also, the activities of 22Ra and 226 Ra have been evaluated separately doing a measurement after the chemical separation of the radium and another one 10 days after. (Author) 9 refs

  12. Nuclear material control and accountancy in a radiochemical plant

    International Nuclear Information System (INIS)

    Crawford, J. M.

    1999-01-01

    The measurement systems in use at Savannah River Site, SRS, to determine material balance around dissolution of fuel, separation and purification of actinides to a nitrate product are described. To ensure that volume accuracy's are as expected, SRS has implemented a volumetric measurement control program to control errors and to detect anomalies. The program consists of periodic instrument calibrations, comparison of in-tank density measurements. An analytical quality control program is in place at SRS to provide assurance that analysis are reliable and to estimate and monitor method performance. Checks include the analysis of standard prior to the use of each method each shift the method is used. At SRS cumulative inventory difference is compared to the combined errors for the balance. The results from current evaluations for uranium and plutonium balances are presented [ru

  13. radiochemical studies on the growth of myeloma cells

    International Nuclear Information System (INIS)

    Elshershaby, H.M.M.

    2008-01-01

    cancer is a disease of unregulated cell growth. humans of all ages develop cancer, and a wide variety of organs are affected. multiple myeloma is a cancer in which antibody-producing plasma cells grow in an uncontrolled and invasive (malignant) manner. melphalan (DNA cross-linker), is one of the most widely used and effective drugs in the treatment of multiple myeloma. thalidomide as an immunomodulatory agent is clinically useful in a number of cancers. antitumor activity may be related to a number of known properties, including antitumor necrosis factor (TNF)-α and T-cell costimulatory and antiangiogenic effect. however, it may also involve direct antitumor effects. radiotherapy is an important modality in the treatment of cancer. the aim of radiotherapy is to deliver radiation doses and schedules that kill cancer cells, while preserving normal tissue function. the aim of these studies was to evaluate the therapeutic effects of some chemical substances (chemotherapy)such as melphalan and thalidomide and γ-radiation (radiotherapy)on the growth of myeloma cells. also some confirmatory tests such as β2-microglobulin, caspases enzymes 8 and 9 and flow cytometric analyses were performed for the obtained optimum doses.

  14. Radiochemical problems of radiation chemical synthesis in n, γ-field of nuclear reactor

    International Nuclear Information System (INIS)

    Mironov, V.P.; Frejdus, N.V.; Bugaenko, L.T.; Kalyazin, E.P.; Petryaev, E.P.

    1981-01-01

    A wide applicability of products of radiation chemical synthesis (RCS), using n, γ-irradiation, is limited by possible contamination of the latter with long-lived radioactive isotopes of chemical elements included in the composition of the reagent and compounds syntesized (chemically non-separable radionuclides - CNR). A technique of the determination of the limit accumulation CNR on the basis of radiation chemical parameters of the synthesis (radiation-chemical yield, the dose rate absorbed, singleness of purpose of RCS etc.) and radiochemical parameters of formation and accumulation of CNR (radiochemical yields of CNR in the products of radiolysis, neutron fluence, the reagent purity etc.) is suggested. The radiochemical evaluation of CNR accumulation (tritium and carbon-14), formed at the expense of activation with neutrons of chemical elements of water and organic substances, consisting of hydrogen, carbon and oxygen has shown that at relatively low yields of final products (> or approximately 3 molecules/100 eV) no accumulation of radionuclides in concentrations reaching the average admissible concentration takes place [ru

  15. Radiochemical determination of zirconium by inductively coupled plasma mass spectrometry (ICPMS)

    International Nuclear Information System (INIS)

    Oliveira, Thiago C.; Oliveira, Arno Heeren de

    2013-01-01

    The zirconium isotope 93 Zr is a long-lived pure β-particle-emitting radionuclide thus occurring as one of the radionuclides found in nuclear reactors. It's produced from 235 U fission and from 92 Zr neutron activation. Due to its long half-life, 93 Zr is one of the interest radionuclides for assessment studies performance of waste storage or disposal. Measurement of 93 Zr is difficult owing to its trace level concentration and its low activity in nuclear wastes and further because its certified standards are not frequently available. The aim of this work was to apply a selective radiochemical separation methodology for 93 Zr determination in nuclear waste and analyze it by Inductively Coupled Plasma Mass Spectrometry (ICPMS). To set up the zirconium radiochemical separation procedure, a zirconium tracer solution was used in order to follow the zirconium behavior during the radiochemical separation. A tracer solution containing the main interferences, Ba, Co, Eu, Fe, Mn, Nb, Ni, Sr, and Y was used in order to verify the decontamination factor during separation process. The limit of detection of 0,039 ppb was obtained for zirconium standard solutions by ICPMS. Then, the protocol will be applied to low level waste (LLW) and intermediate level waste (ILW) from nuclear power plants. (author)

  16. Influence of Storage Temperature on Radiochemical Purity of 99mTc-Radiopharmaceuticals.

    Science.gov (United States)

    Uccelli, Licia; Boschi, Alessandra; Martini, Petra; Cittanti, Corrado; Bertelli, Stefania; Bortolotti, Doretta; Govoni, Elena; Lodi, Luca; Romani, Simona; Zaccaria, Samanta; Zappaterra, Elisa; Farina, Donatella; Rizzo, Carlotta; Giganti, Melchiore; Bartolomei, Mirco

    2018-03-15

    The influence of effective room temperature on the radiochemical purity of 99m Tc-radiopharmaceuticals was reported. This study was born from the observation that in the isolators used for the preparation of the 99m Tc-radiopharmaceuticals the temperatures can be higher than those reported in the commercial illustrative leaflets of the kits. This is due, in particular, to the small size of the work area, the presence of instruments for heating, the continuous activation of air filtration, in addition to the fact that the environment of the isolator used for the 99m Tc-radiopharmaceuticals preparation and storage is completely isolated and not conditioned. A total of 244 99m Tc-radiopharmaceutical preparations (seven different types) have been tested and the radiochemical purity was checked at the end of preparation and until the expiry time. Moreover, we found that the mean temperature into the isolator was significantly higher than 25 °C, the temperature, in general, required for the preparation and storage of 99m Tc-radiopharmaceuticals. Results confirmed the radiochemical stability of radiopharmaceutical products. However, as required in the field of quality assurance, the impact that different conditions than those required by the manufacturer on the radiopharmaceuticals quality have to be verified before human administration.

  17. Investigation of quantitative separation of thorium, uranium, neptunium and plutonium from complex radiochemical mixtures

    International Nuclear Information System (INIS)

    Ushatskij, V.N.; Preobrazhenskaya, L.D.; Kolychev, V.B.; Gugel', E.S.

    1979-01-01

    Quantitative separation of actinides and their radiochemical purification with the aid of TBP with subsequent separation of thorium and quantitative separation of U, Np and Pu with the aid of D2EHPA have been studied. The method has been developed for quantitative extraction-chromatographic separation and radiochemical purification of nanogram amounts of U, Pu and microgram amounts of Th and Np from complex radiochemical mixtures containing both fragment radioisotopes and non-radioactive macrocomponents ( Fe,Al,Mg,Mn, Na and others). The method calls for application of one-extraction-chromatographic column with TBP and one column with D2EHPA. Thorium is separated at the first stage since it does not form complexes in a chloride solution during washing of the sorption column with 6. OM HCl. Npsup((4)) and Pusup((3)) required for separation are stabilized with the aid of hydrazine and hydroxylamine mixture. The yield of each of the above-cited actinide elements during the complete two-stage separation and at the stage of their separation varies within the range of 98.5-99.3%

  18. Analysis of thermodynamic properties for high-temperature superconducting oxides

    International Nuclear Information System (INIS)

    Kushwah, S.S.; Shanker, J.

    1993-01-01

    Analysis of thermodynamic properties such as specific heat, Debye temperature, Einstein temperature, thermal expansion coefficient, bulk modulus, and Grueneisen parameter is performed for rare-earth-based, Tl-based, and Bi-based superconducting copper oxides. Values of thermodynamic parameters are calculated and reported. The relationship between the Debye temperature and the superconducting transition temperature is used to estimate the values of T c using the interaction parameters from Ginzburg. (orig.)

  19. Hydrologic conditions and distribution of selected radiochemical and chemical constituents in water, Snake River Plain aquifer, Idaho National Engineering Laboratory, Idaho, 1989 through 1991

    International Nuclear Information System (INIS)

    Bartholomay, R.C.; Orr, B.R.; Liszewski, M.J.; Jensen, R.G.

    1995-08-01

    Radiochemical and chemical wastewater discharged since 1952 to infiltration ponds and disposal wells at the Idaho National Engineering Laboratory (INEL) has affected water quality in the Snake River Plain aquifer. The U.S. Geological Survey, in cooperation with the U.S. Department of Energy, maintains a continuous monitoring network at the INEL to determine hydrologic trends and to delineate the movement of radiochemical and chemical wastes in the aquifer. This report presents an analysis of water-level and water-quality data collected from the Snake River Plain aquifer during 1989-91. Water in the eastern Snake River Plain aquifer moves principally through fractures and interflow zones in basalt, generally flows southwestward, and eventually discharges at springs along the Snake River. The aquifer is recharged principally from irrigation water, infiltration of streamflow, and ground-water inflow from adjoining mountain drainage basins. Water levels in wells throughout the INEL generally declined during 1989-91 due to drought. Detectable concentrations of radiochemical constituents in water samples from wells in the Snake River Plain aquifer at the INEL decreased or remained constant during 1989-91. Decreased concentrations are attributed to reduced rates of radioactive-waste disposal, sorption processes, radioactive decay, and changes in waste-disposal practices. Detectable concentrations of chemical constituents in water from the Snake River Plain aquifer at the INEL were variable during 1989-91. Sodium and chloride concentrations in the southern part of the INEL increased slightly during 1989-91 because of increased waste-disposal rates and a lack of recharge from the Big Lost River. Plumes of 1,1,1-trichloroethane have developed near the Idaho Chemical Processing Plant and the Radioactive Waste Management Complex as a result of waste disposal practices

  20. Analysis/design of tensile property database system

    International Nuclear Information System (INIS)

    Park, S. J.; Kim, D. H.; Jeon, I.; Lyu, W. S.

    2001-01-01

    The data base construction using the data produced from tensile experiment can increase the application of test results. Also, we can get the basic data ease from database when we prepare the new experiment and can produce high quality result by compare the previous data. The development part must be analysis and design more specific to construct the database and after that, we can offer the best quality to customers various requirements. In this thesis, the analysis and design was performed to develop the database for tensile extension property

  1. Radiochemical studies on some industrial pollutants released to the environment

    International Nuclear Information System (INIS)

    Metwally, E.M.Abel-Ghany

    1997-01-01

    This work aims at characterizing the industrial pollutants that may be released from: Abu-Zaabal fertilizer company, arab ceramic industry, Egyptian alum company near the compass of Atomic Energy Authority (AEA) in Inshas and petroleum pipelines company at the start of lsmailia canal. The work concentrates on soil or/and sediment pollution, the lsmailia canal water stream pollution and plant pollution. Type of the element and its content are major parameters that are traced in the traced in the experimental work. The work stresses on the analysis of the raw materials used in the chosen Factories, their products of current use as well as their wastes and drainage. Instrumental neutron activation analysis (INAA) technique and radiometric determination of elements are adopted through this work. The selection of the technique is based on less time consumption, high accuracy, reliability, selectivity as well as chemical processing and separation need not to applied. Together with INAA determination of natural radioactivity are also adopted for accessing certain specific elements of importance to the fertilizer industry. Beside the mentioned techniques several classical analytical techniques as atomic absorption, spectrophotometric determination and volumetric methods are handled. 25 tabs., 80 figs., 117 refs

  2. Contamination, decontamination and radiochemical safety analyses of the RA reactor (Report 1966)

    International Nuclear Information System (INIS)

    Maksimovic, Z.

    1966-12-01

    This contract is concerned with development of methods for detection of fission products i the heavy water and quantitative radiochemical analysis for detecting one fission product which enables reliable verification of heavy water contamination by fission products and estimation of contamination level. Qualitative and quantitative radiometry measurements of fission products in water are shown on page 4. Page 6 shows study of contamination and decontamination of water on the laboratory level. Experiments have shown that the majority of fission products was adsorbed on the uranium oxide and that the iodine isotopes are partly in water (non-adsorbed). Gamma spectrometry analyses showed 131 I moves to distillate with the initial quantities of distilled water. decontamination factors compared to the total activity of fission products in distillator and distillate are not higher than ∼10 3 . Decontamination of water contaminated by uranium oxide and fission products in the distillation device of the RA reactor is shown on page 8. Experiments demanded special preparation due to high activity of uranium (1.7 g of uranium irradiated in the reactor for 10 days at neutron flux 1.10 13 n.cm 2 /s. Prior preparations for transport and dissolution of irradiated metal uranium as well as sampling were needed. Distillation was done under lower pressure and temperature to avoid possible contamination of the environment bu fission products and iodine. Decontamination factors are shown in Table. Contamination and decontamination of stainless steel on the laboratory level are described on page 5. It was found that the deposition of activity on the stainless steel plates is inhomogeneous showing that the uranium oxide and fission products are deposited on the rough metal surfaces. According to literature data and our laboratory studies decontamination was done by nitric acid solution (2MHNO 3 ). Since the heavy water system of the RA reactor was made of stainless teel (except the

  3. The applicability of the Poisson distribution in radiochemical measurements

    International Nuclear Information System (INIS)

    Luthardt, M.; Proesch, U.

    1980-01-01

    The fact that, on principle, the Poisson distribution describes the statistics of nuclear decay is generally accepted. The applicability of this distribution to nuclear radiation measurements has recently been questioned. Applying the chi-squared test for goodness of fit on the analogy of the moving average, at least 3 cases may be distinguished, which lead to an incorrect rejection of the Poisson distribution for measurements. Examples are given. Distributions, which make allowance for special parameters, should only be used after careful examination of the data with regard to other interfering effects. The Poisson distribution will further on be applicable to many simple measuring operations. Some basic equations for the analysis of poisson-distributed data are given. (author)

  4. Radiochemical Ageing of Aromatic Polymers PEEK, PSU and Kapton registered

    International Nuclear Information System (INIS)

    Richaud, E.; Audouin, L.; Colin, X.; Verdu, J.; Monchy-Leroy, C.

    2010-01-01

    This article deals with degradation mechanism of three aromatic polymers submitted to γ-rays in air at 60 deg. C. T g measurements and GPC results indicated that thin samples (thickness lower than 200 μm) undergo mostly chain scission whereas sol gel analysis and rheometric measurements showed that thicker ones undergo mainly crosslinking. Both results are explained by oxygen diffusion control of oxidation resulting in the formation of a superficial oxidized layer experimentally observed by μATR InfraRed in which oxidative processes orientate rather to chain scission than crosslinking. Experimental results also allowed discussing relative oxidative stability, sensitivity of T g to chain scission concentration, and crosslinking mechanism (Y or H).

  5. Drug-binding ability of human serum albumin at children with chronic virus hepatitis radiochemical definition method

    International Nuclear Information System (INIS)

    Kim, A.A.; Dadakhanov, J.A.; Djuraeva, G.T.; Shukurov, B.V.; Mavlyanov, I.R.

    2006-01-01

    chronic virus hepatitis B and C at children the hypoproteinaemia and disproteinemia are observed. Thus the contents of common protein and albumin fraction at chronic hepatitis B is reduced in comparison with control group 1,3 times on the average (P<0,05). It was marked disproteinemia due to increasing of gamma-globulin fraction of blood serum. At a chronic virus hepatitis B at children the ability of serum albumin to bind the tritium labeled drotaverine hydrochloride was reduced in comparison with control groip on the average in 1,3 times. At a chronic hepatitis C hypoproteinemia was expressed less than at a chronic virus hepatitis B, however paid to itself attention more expressed disproteinemia due to increasing of gamma-globulin fraction. Thus ability of serum albumin to bind the tritium labeled drotaverine hydrochloride dropped in comparison with control group on the average in 1,5 times (P<0,05). Thus, received results testify that at a chronic virus hepatitis B and C at children infringement of complexing properties of albumin of a blood is marked that testifies to downstroke of drug-binding function. The radiochemical method of definition of ability of serum albumin to bind the tritium labeled drotaverine hydrochloride is efficient and high informative. (author)

  6. Radiochemical study of the reactions of heavy ions with gold

    International Nuclear Information System (INIS)

    Binder, I.

    1977-07-01

    Thick gold foils have been bombarded with heavy-ion projectiles at energies above the Coulomb barrier. The radioactive products were identified and their yields measured using gamma-ray spectrometry and an extensive series of computer programs developed for the data analysis. The total mass-yield distribution was extracted from the data using charge-dispersion curves inferred from the experimental results. One observes a change in the mass-yield distributions corresponding to primarily fusion-fission tractions occurring with the lighter projectiles Ne-20 and Ar-40 and deep-inelastic transfer reactions predominating with heavier Kr-84, Kr-86, and Xe-136 projectiles. For the deep-inelastic transfer reaction, more mass transfer is seen to occur for a higher incident projectile energy, and the Gaussian distribution of products shows exponential tailing. The preferred direction for mass transfer is from gold to the projectile nucleus. Sequential fission is a likely fate for nucludes beyond the lead shell closure. The ''gold finger'' is explained as a combination of mass transfer, nucleon evaporation and sequential fission. The yields of gold nuclides indicate a superposition of two reaction mechanisms, quasi-elastic and deep-inelastic. The angular momentum involved with each mechanism determines which of two isomeric states is the end product of the nuclear reaction. Suggestions are offered regarding the possibility of synthesizing super-heavy elements by use of heavy-ion nuclear reactions

  7. Radiochemical study of the reactions of heavy ions with gold

    Energy Technology Data Exchange (ETDEWEB)

    Binder, I.

    1977-07-01

    Thick gold foils have been bombarded with heavy-ion projectiles at energies above the Coulomb barrier. The radioactive products were identified and their yields measured using gamma-ray spectrometry and an extensive series of computer programs developed for the data analysis. The total mass-yield distribution was extracted from the data using charge-dispersion curves inferred from the experimental results. One observes a change in the mass-yield distributions corresponding to primarily fusion-fission tractions occurring with the lighter projectiles Ne-20 and Ar-40 and deep-inelastic transfer reactions predominating with heavier Kr-84, Kr-86, and Xe-136 projectiles. For the deep-inelastic transfer reaction, more mass transfer is seen to occur for a higher incident projectile energy, and the Gaussian distribution of products shows exponential tailing. The preferred direction for mass transfer is from gold to the projectile nucleus. Sequential fission is a likely fate for nucludes beyond the lead shell closure. The ''gold finger'' is explained as a combination of mass transfer, nucleon evaporation and sequential fission. The yields of gold nuclides indicate a superposition of two reaction mechanisms, quasi-elastic and deep-inelastic. The angular momentum involved with each mechanism determines which of two isomeric states is the end product of the nuclear reaction. Suggestions are offered regarding the possibility of synthesizing super-heavy elements by use of heavy-ion nuclear reactions.

  8. Evaluation of the Ra-226 activity in public-consumption water in the Huarangal Valley using the radiochemical precipitation method as Ba(Ra)SO4

    International Nuclear Information System (INIS)

    Ysla C, M.A.

    1999-01-01

    Five radiochemical methods for Ra-226 determination in public-consumption river waters are developed in this work. Quantification of this radionuclide was conducted through high-resolution gamma spectrometry. These five methods are based on the precipitation of Ra-226 as Ba(Ra)SO 4 . The second of these methods has been considered the best due to its low cost, high radiochemical performance (83,53%) and lowest standard deviation (7,97). Using the second method (standardized method) it was determined that the activity present in a 32 L sample of water is 0,1526 Bq/L. Assuming that each person in Huarangal Valley consumes an average of 2 liters of water a day, we can estimate that this person consumes 111,398 Bq anally, a very low percentage compared to the limit activity reported in other parts of the world. Physicochemical analysis were also conducted in waters of the Chillon river; the results obtained are within the permissible limits established by the World Health Organization, the Institute of Technological, Industrial and Technical Regulation Research (ITINTEC), and the law for Waters of the Ministry of Agriculture. One can conclude, from the physicochemical analysis that have been conducted, that the waters of the Chillon river are fit for public consumption and do not present specific radio-sanitary risks for people living in the Huarangal valley

  9. Validation of the FDG (18F) radiochemical purity assay by thin layer chromatography; Validacao do ensaio de pureza radioquimica do FDG (18F) por cromatografia em camada delgada

    Energy Technology Data Exchange (ETDEWEB)

    Leao, R.L.C.; Oliveira, M.L.; Nascimento, J.E.; Nascimento, N.C.E.S., E-mail: renata.lleao@hotmail.com [Centro Regional de Ciencias Nucleares do Nordeste (CRCN-NE/CNEN-PE), Recife, PE (Brazil). Div. de Producao de Radiofarmacos

    2013-08-15

    All methodologies utilized in radiopharmaceutical industry should be validated in order to prove that they meet the requirements of analytical applications, ensuring the reliability of the results. At a radiopharmaceutical industry there is one challenge aspect: sometimes it is not possible use a stable standard to perform the validation analysis. In order to overcome this difficulty, the objective of this study was to suggest a validation protocol for these methodologies, based on the recommendations of RE n° 899/Agencia Nacional de Vigilancia Sanitaria (ANVISA), and prove its efficiency, performing the radiochemical purity validation test of FDG (18F), by TLC. To obtain the calibration curve, we suggested that the theoretical activity values should be determined using a dose calibrator, simultaneously of each analysis performed by TLC, for 5 hours. The method was linear (R{sup 2} of 0.996), precise (CV% <5%) and accurate (96.85% < accuracy < 102.56%). In relation to the robustness test, our experiments evaluated the influence of the distance travelled by mobile phase, variations at mobile phase concentration and type of chromatographic plate (silica gel on glass or aluminium plates). The detection and quantification limits were determined (321.9 and 1065.6 kBq, respectively). As expected, this methodology was nonspecific, showing a slight spot corresponding to the FDM. The proposed protocol was efficient and the methodology tested was effective to determine the radiochemical purity of FDG (18F), in accordance to the limits recommended by ANVISA. (author)

  10. Radiochemical investigations of nuclear properties. Progress report, January 1, 1979-December 31, 1979

    International Nuclear Information System (INIS)

    Daly, P.J.

    1980-01-01

    Investigations of the high-spin level spectra of the nuclei 200 Pb, 202 Pb, and 188 Os were completed, and the results are summarized. The results of collaborative studies of high-spin excitations in 147 Tb and 148 Tb are also briefly reported. New studies of A approx. 150 nuclei at very high angular momenta with heavy-ion beams from the Argonne Tandem-Linac were started. 5 figures, 1 table

  11. Radiochemical investigations of nuclear properties. Progress report, October 1, 1977--December 31, 1978

    International Nuclear Information System (INIS)

    Daly, P.J.

    1979-01-01

    Results of (α,xnγ) and (Heavy Ion, xnγ) investigations of high spin excitations in spherical and transitional heavy nuclei are summarised. Considerable progress was made in studies of the level structures of 187 , 188 , 189 Pt and of 200 , 201 , 202 Pb. Investigations of the structure of the Z = 64, N = 82 nucleus 146 Gd and of other nuclei consisting of the 146 Gd core plus one, two or three valence nucleons are also briefly described. A list of publications is included

  12. Natural radioprotection of cells. Radiochemical, biochemical and clinical aspects

    International Nuclear Information System (INIS)

    Revesz, L.

    1982-01-01

    Recent investigations on natural radioprotection are reviewed, carried out with human fibroblast strains and lymphoblastoid cell lines derived from individuals heterozygous or homozygous with regard to an inborn error in glutathione synthetase activity. The cells have a decreased content of non-protein bound sulphydryls and lack specifically glutathione either almost totally, or have a glutathione level about fifty per cent of the normal. Using single-strand DNA breaks as the end-point of the radiation effect, oxygen and misonidazole fail to enhance the radiosensitivity of cells deficient in glutathione, and OER and DMF close to unity are calculated. Substitution of glutathione deficiency by treatment with different radioprotective aminothiols decreases the sensitivity of the cells, and makes them susceptible to the oxygen effect. In glutathione deficient cells, rejoining of the single strand breaks proceeds at a normal rate after anoxic radiation exposure, but is inhibited after oxic exposure. Using clonogenic survival as the end-point for the radiation effect, sensitization of glutathione deficient cells is again greatly decreased, but OER and DMF differ significantly from unity. The data were interpreted to indicate that endogenous glutathione or some exogenous aminothiols repair radiation induced radicals in key target molecules by hydrogen transfer in a competition with oxygen and/or misonidazole which permanent the damage. The outcome of the radical reactions will be modified by further post-irradiation enzymatic repair processes of which at least one is glutathione dependent. For the appropriate clinical application of hypoxic cell sensitizers, the use of a ''vascularization index'', possibly determined by morphometric analysis of histological preparations, is suggested as a diagnostic parameter to characterize neoplasms besides current routine staging and grading of differentiation

  13. Plant Phenolics: Extraction, Analysis and Their Antioxidant and Anticancer Properties

    Directory of Open Access Journals (Sweden)

    Jin Dai

    2010-10-01

    Full Text Available Phenolics are broadly distributed in the plant kingdom and are the most abundant secondary metabolites of plants. Plant polyphenols have drawn increasing attention due to their potent antioxidant properties and their marked effects in the prevention of various oxidative stress associated diseases such as cancer. In the last few years, the identification and development of phenolic compounds or extracts from different plants has become a major area of health- and medical-related research. This review provides an updated and comprehensive overview on phenolic extraction, purification, analysis and quantification as well as their antioxidant properties. Furthermore, the anticancer effects of phenolics in-vitro and in-vivo animal models are viewed, including recent human intervention studies. Finally, possible mechanisms of action involving antioxidant and pro-oxidant activity as well as interference with cellular functions are discussed.

  14. Material Properties Analysis of Structural Members in Pumpkin Balloons

    Science.gov (United States)

    Sterling, W. J.

    2003-01-01

    The efficient design, service-life qualification, and reliability predictions for lightweight aerospace structures require careful mechanical properties analysis of candidate structural materials. The demand for high-quality laboratory data is particularly acute when the candidate material or the structural design has little history. The pumpkin-shaped super-pressure balloon presents both challenges. Its design utilizes load members (tendons) extending from apex to base around the gas envelope to achieve a lightweight structure. The candidate tendon material is highly weight-efficient braided HM cord. Previous mechanical properties studies of Zylon have focused on fiber and yarn, and industrial use of the material in tensile applications is limited. For high-performance polymers, a carefully plamed and executed properties analysis scheme is required to ensure the data are relevant to the desired application. Because no directly-applicable testing standard was available, a protocol was developed based on guidelines fiom professional and industry organizations. Due to the liquid-crystalline nature of the polymer, the cord is very stiff, creeps very little, and does not yield. Therefore, the key material property for this application is the breaking strength. The pretension load and gauge length were found to have negligible effect on the measured breaking strength over the ranges investigated. Strain rate was found to have no effect on breaking strength, within the range of rates suggested by the standards organizations. However, at the lower rate more similar to ULDB operations, the strength was reduced. The breaking strength increased when the experiment temperature was decreased from ambient to 183K which is the lowest temperature ULDB is expected to experience. The measured strength under all test conditions was well below that resulting from direct scale-up of fiber strength based on the manufacturers data. This expected result is due to the effects of the

  15. Application of neutron activation analysis in studies of long-term effects on soil and vegetation of trace elements from reuse of sewage effluents and radiochemical-neutron activation analysis of marine species in a study of arsenic and selenium in aquatic food chains of the Southern California ecosystems

    International Nuclear Information System (INIS)

    Goeders, M.

    1982-01-01

    Samples of sewage effluent, irrigation water, soil to which the effluent is being applied, and the plant materials grown in the soil were examined to ascertain whether trace elements accumulate in any of these components when soils are irrigated with waste water. Two study sites, one in Orange County and the other in Las Virgenes, located in Ventura County, were investigated. As, Sb, Cr, Co, Fe, Mn, Hg, and Se were examined by neutron activation analysis, and atomic absorption spectroscopy was used to determine Cd, Cu, Pb, Ni, Ag, and Zn. The results of this study provide information for formulating standards concerning trace elements in treated sewage effluents for irrigation. The degree to which the southern California coastal marine ecosystems are structured with respect to pollutants was also investigated by determining concentrations of pollutants in tissues of marine organisms and comparing these data with trophic-level assignments determined from food habit studies. As, Sb, and Se as marine pollutants were determined, and the effects, if any, of these elements from the principal sewage outfalls in southern California upon marine biological species were evaluated

  16. Chemical and radiochemical control of the primary circuit of Atucha INPP (Nuclear Power Plant) since the start up in January 1990

    International Nuclear Information System (INIS)

    Ali, S.P; Baungartner, E.C.; Blesa, M.A.

    1990-01-01

    Since the start up of Atucha I Nuclear Power Plant in January 1990, an exhaustive chemical and radiochemical control of primary media was undertaken. The main objectives were the evaluation of the water condition after the long outage and the determination of activity measurements limitations to detect and localize fuel failures. Chemical and radiochemical techniques were critically proved. At the same time, a complete program of updating and optimization of those procedures was developed, including the revision of the analytical parameters, range of applicability and accuracy. A more adequate processing of data was adopted. They were compared with historical values corresponding to periods with and without fuel elements failures, used as references. The analysis of theoretical models of total gamma activity concentration and some specific radionuclides activity concentration evolution and their rates, and the comparison with experimental data obtained during normal operation including some failure events, generated tables of alarm criteria through a combination of parameters. Additionally, actions are suggested for different combination of parameters. Operative conditions that might interfere in the detection and localization of a failed fuel element are also pointed out. (Author)

  17. Application of radiochemical method under radioecological situation study in locations of radioactive wastes damping in shallow gulfs of the Novaya Zemlya Archipelago

    International Nuclear Information System (INIS)

    Stepanets, O.V.; Borisov, A.P.; Komarevskij, V.M.; Ligachev, A.N.; Solov'eva

    2005-01-01

    Results of works carried out on the 'Boris Petrov Academician' research ship on burial locations examination of submarine potential hazardous objects in the Kara Sea and in the Stepovoj, Abrosimov and Stivol'ka gulfs are cited. Comprehensive radioecological studies in the damping locations of solid radioactive wastes in the Novaya Zemlya Archipelago conducted in 2002-2004 with application of radio-chemical methods for certain radionuclides determination in the samples of bottom sediments and water in the immediate vicinity from the submerged objects are allowing to revealing the objective picture of man-caused contamination of water environment near submerged objects and by the gulfs water area. The studies uniting instrumental tools of acoustic search and visual objects inspection, opportunity of sampling of bottom sediments and near bottom water in the object vicinity and away from it with subsequent analysis of selected samples by the method of direct gamma-spectroscopy and radio-chemical concentration of certain radionuclides are permitting to obtain the statistically assisted data set on special concentrations of cesium, strontium, cobalt, plutonium radionuclides in a water layer and bottom sediments. Obtained results with taking into account of hydrological conditions allow to explain the peculiarities of radioactivity distribution in separate water areas

  18. Global sensitivity analysis of multiscale properties of porous materials

    Science.gov (United States)

    Um, Kimoon; Zhang, Xuan; Katsoulakis, Markos; Plechac, Petr; Tartakovsky, Daniel M.

    2018-02-01

    Ubiquitous uncertainty about pore geometry inevitably undermines the veracity of pore- and multi-scale simulations of transport phenomena in porous media. It raises two fundamental issues: sensitivity of effective material properties to pore-scale parameters and statistical parameterization of Darcy-scale models that accounts for pore-scale uncertainty. Homogenization-based maps of pore-scale parameters onto their Darcy-scale counterparts facilitate both sensitivity analysis (SA) and uncertainty quantification. We treat uncertain geometric characteristics of a hierarchical porous medium as random variables to conduct global SA and to derive probabilistic descriptors of effective diffusion coefficients and effective sorption rate. Our analysis is formulated in terms of solute transport diffusing through a fluid-filled pore space, while sorbing to the solid matrix. Yet it is sufficiently general to be applied to other multiscale porous media phenomena that are amenable to homogenization.

  19. Does Intellectual Property Restrict Output? An Analysis of Pharmaceutical Markets*

    Science.gov (United States)

    Lakdawalla, Darius; Philipson, Tomas

    2013-01-01

    Standard normative analysis of intellectual property focuses on the balance between incentives for research and the static welfare costs of reduced price-competition from monopoly. However, static welfare loss from patents is not universal. While patents restrict price competition, they may also provide static welfare benefits by improving incentives for marketing, which is a form of non-price competition. We show theoretically how stronger marketing incentives mitigate, and can even offset, the static costs of monopoly pricing. Empirical analysis in the pharmaceutical industry context suggests that, in the short-run, patent expirations reduce consumer welfare as a result of decreased marketing effort. In the long-run, patent expirations do benefit consumers, but by 30% less than would be implied by the reduction in price alone. The social value of monopoly marketing to consumers alone is roughly on par with its costs to firms. PMID:25221349

  20. Radiochemical determination of 210 Pb and 226Ra in petroleum sludges and scales

    International Nuclear Information System (INIS)

    Araujo, Andressa Arruda de

    2005-01-01

    The oil extraction and production, both onshore and offshore, can generate different types of residues, such as sludge, that is deposited in the water/oil separators, valves and storage tanks and scales, which form i the inner surface of ducts and equipment. Analyses already carried out through gamma spectrometry indicated the existence of high radioisotope concentration. However, radionuclides emitting low-energy gamma-rays, such as 210 Pb, are hardly detected by that technique. Consequently, there is a need to test alternative techniques to determine this and other radionuclides from the 238 U series. This work, therefore, focuses on the radiochemical determination of the concentration of 210 Pb, and 226 Ra in samples of sludge and scale from the oil processing stations of the UN-SEAL, a PETROBRAS unit responsible for the exploration and production of petroleum in Sergipe and Alagoas. The sludge and scale samples went through a preliminary process of extraction of oil, in order to separate the solid phase, where the largest fraction of the radioactivity is concentrated. After oil removal, the samples were digested using alkaline fusion as an option for dissolution. Finally, their activity concentration was determined for the samples of sludge and scales, using and alternative radiochemical method, which is based on ionic exchange. The activity concentration found for 210 Pb varied from 1,14 to 507,3 kBq kg -1 . The values for 226 Ra were higher, varying from 4,36 to 3.445 kBq kg -1 . The results for 226 Ra were then compared with the ones found for the same samples of sludge and scales using gamma spectrometry. The results of the comparison confirm the efficiency of the methodology used int hi work, that is, radiochemical determination by means of ionic exchange. (author)

  1. The radiochemical purity of technetium-99m-tin-diethylene-triamino-pentaacetic acid (DTPA) complex

    International Nuclear Information System (INIS)

    Besnard, M.; Costerousse, O.; Merlin, L.; Coehn, Y.

    1975-01-01

    The effect on radiochemical purity was studied as a function of the storage period of tin-DTPA solution and of the technetium-complex solution. The quantity of the pertechnetate ions present in the solution is determined by ascending paper chromatography, and an attempt was made to clarify the bond type of technetium by a spectrophotometric method. The tin-DTPA solutions for complexing of the reduced technetium are stable over a period of 8 weeks. The yield of the radiopharmaceutical product is better than 95%. (G.Gy.)

  2. Radiochemical and thermal studies of the cation-exchanged forms of synthetic zeolite Linde sieve A

    Energy Technology Data Exchange (ETDEWEB)

    Banerjee, S P [Saugar Univ. (India). Dept. of Chemistry

    1976-02-01

    The compositions of the cobalt and silver-exchanged forms of synthetic zeolite Sieve A have been determined by radiochemical and TGA studies and correspond to Co/sub 6/A.19.8H/sub 2/O and Ag/sub 12/..cap alpha... 20H/sub 2/O respectively (A=Al/sub 12/Si/sub 12/O/sub 48//sup 12/-). Heating of these zeolites inhibits their capacity for cation exchange and water absorption. No evidence of occluded NaAlO/sub 2/ has been found.

  3. Design of the Laboratory-Scale Plutonium Oxide Processing Unit in the Radiochemical Processing Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Lumetta, Gregg J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Meier, David E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tingey, Joel M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Casella, Amanda J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Delegard, Calvin H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Edwards, Matthew K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Orton, Robert D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Rapko, Brian M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Smart, John E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-05-01

    This report describes a design for a laboratory-scale capability to produce plutonium oxide (PuO2) for use in identifying and validating nuclear forensics signatures associated with plutonium production, as well as for use as exercise and reference materials. This capability will be located in the Radiochemical Processing Laboratory at the Pacific Northwest National Laboratory. The key unit operations are described, including PuO2 dissolution, purification of the Pu by ion exchange, precipitation, and re-conversion to PuO2 by calcination.

  4. Conceptual Design for the Pilot-Scale Plutonium Oxide Processing Unit in the Radiochemical Processing Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Lumetta, Gregg J.; Meier, David E.; Tingey, Joel M.; Casella, Amanda J.; Delegard, Calvin H.; Edwards, Matthew K.; Jones, Susan A.; Rapko, Brian M.

    2014-08-05

    This report describes a conceptual design for a pilot-scale capability to produce plutonium oxide for use as exercise and reference materials, and for use in identifying and validating nuclear forensics signatures associated with plutonium production. This capability is referred to as the Pilot-scale Plutonium oxide Processing Unit (P3U), and it will be located in the Radiochemical Processing Laboratory at the Pacific Northwest National Laboratory. The key unit operations are described, including plutonium dioxide (PuO2) dissolution, purification of the Pu by ion exchange, precipitation, and conversion to oxide by calcination.

  5. A new radiochemical assay for fructose-1,6-diphosphatase in human leucocytes

    International Nuclear Information System (INIS)

    Janssen, A.J.M.; Trijbels, F.J.M.

    1982-01-01

    Fructose-1,6-diphosphatase (D-fructose-1,6-diphosphate 1-phosphohydrolase, EC 3.1.3.11, FDPase) is one of the key enzymes of the gluconeogenic pathway. Measuring the activity both in the presence and in the absence of AMP yields the true FDPase activity, corrected for non-specific phosphatase activity. In this paper the authors introduce a new radiochemical assay for FDPase, based on the decarboxylating activity of 6-phosphogluconate dehydrogenase. One molecule [U- 14 C]fructose-1,6-diphosphate yields one molecule 14 CO 2 which can be captured in strongly basic solutions and counted in a liquid scintillation counter. (Auth.)

  6. Radiochemical procedure for the determination of plutonium isotopes in powdered milk

    International Nuclear Information System (INIS)

    Taddei, M.H.T.; Silva, N.C.

    2006-01-01

    A radiochemical procedure for the determination of alpha-emitting isotopes of plutonium in powdered milk is proposed. The procedure involves sample dissolution (by HNO 3 and HClO 4 ), separation by ionic-exchange resin, electrodeposition and alpha-spectroscopy. In order to determine the chemical recovery, 242 Pu was employed as a tracer. A reference material (Marine Sediment IAEA 135) was analyzed to validate such procedure, and to show its reliability. Afterwards, some powdered milk, produced for international trade, was analyzed and chemical recovery was found to be around 95%. (author)

  7. Methods for nuclear material control used in the basic production of a typical radiochemical plant

    International Nuclear Information System (INIS)

    Kositsyn, V.F.; Mukhortov, N.F.; Korovin, Yu.I.; Rudenko, V.S.; Petrov, A.M.

    1999-01-01

    Techniques for destructive and non-destructive assay of the component and isotopic composition of nuclear materials are described, namely gravimetric, titrimetric, coulometric, mass spectrometry, as well as those based on registration of neutron and γ radiations. Their metrologic characteristics are described. The techniques described are suggested to be used for nuclear material (NM) control and accounting purposes at the model radiochemical plant for processing irradiated fuel subassemblies from power reactors. The measurement control program is also described. This program is intended for the measurement quality assurance in the framework of NM control and accountancy system [ru

  8. Radiochemical techniques for determining some naturally occurring radionuclides in marine environmental materials

    Energy Technology Data Exchange (ETDEWEB)

    Baker, C W [Ministry of Agriculture, Fisheries and Food, Lowestoft (UK). Fisheries Lab.

    1984-06-15

    The determination of some of the naturally-occurring, alpha-emitting radionuclides in marine environmental materials, is of interest for several reasons. Radium and radon nuclides are potentially useful as oceanographic tracers. Lead and thorium nuclides may be used to study sedimentation rates, mixing processes and bioturbation in sediments. Radium and polonium nuclides are incorporated into food chains and the data may provide a perspective against which to assess the significance, for marine organisms, of exposure to radiation in a marine radioactive waste disposal situation. This paper discusses the manner in which samples are taken, and the radiochemical methods which have been employed to measure the nuclides, together with some data produced.

  9. Rapid and accurate determination of radiochemical purity of sup(99m)Tc compounds

    International Nuclear Information System (INIS)

    Tamat, S.R.

    1977-01-01

    The wide spread use of sup(99m)Tc-labelled radiopharmaceuticals and limitation of the short half-life of the isotope, is associated with an urgent need for a rapid, simple but accurate method for determining the radiochemical purity of the compound. A short paper chromatographic (KK) or thin layer chromatographic (KLT) method using 95% methanol or 0.9% saline solution as solvents, has solved the problem. With these methods, the amount of free sup(99m)Tc pertechnetate in a compound, can be determined in only a few minutes. These methods compare satisfactorily with lengtheir procedures. (author)

  10. Nuclear chemical method for preparation of free carbenium ions and radiochemical investigation of reactions of these particles

    International Nuclear Information System (INIS)

    Nefedov, V.D.; Sinotova, E.N.; Toropova, M.A.

    1980-01-01

    Tritium nuclear transformation (β-decay) in the composition of the molecules of hydrocarbons, appearance of primary molecular ions and formation of free carbenium ion are the main items of nuclear-chemical method of preparation of free carbenium ions. The method permits to prepare carbenium ions present in free state, i.e. without counterion and without solvate sheath of variou nitial localization of the charge. The rate of carbenium ion generation is strictly definite and does not depend upon outer conditions. The method suggested permits to prepare carbenium ions in all phases, study their reactions with individual substances in gaseous, liquid and solid states. The study of ion-molecular reactions is carried out using radiochemical method. The analysis of the products is made using the method of gaseous radiochromatography. Development of preparation techniques of carbenium ions and their analogues, study of the reactions of these particles with different classes of compounds, investigation of the effect of different factors upon procedure of ion-molecular reactions are the main directions of the investigations

  11. Development of a radiochemical procedure for certification of phosphorus implantation dose in silicon

    International Nuclear Information System (INIS)

    Paul, R.L.; Simons, D.S.

    2002-01-01

    The U.S. semiconductor industry relies heavily on secondary ion mass spectrometry (SIMS) for characterization of the depth distribution of dopants such as boron, arsenic, and phosphorus in silicon. To assist the industry in achieving high accuracy measurements, two Standard Reference Materials (SRMs) have been developed by NIST as SIMS calibration standards: SRM 2137 (Boron Implant in Silicon), certified by neutron depth profiling, and SRM 2134 (Arsenic Implant in Silicon), certified by instrumental neutron activation analysis. The industry is still in need of a phosphorus standard. Plans are currently underway to develop a phosphorus implant in silicon SRM, to be certified by radiochemical neutron activation analysis (RNAA). RNAA was chosen because other techniques lack the necessary sensitivity, chemical specificity and matrix independence to measure phosphorus at implantation levels. In order to assess the sensitivity, accuracy, and precision of RNAA for this work, preliminary measurements were carried out on six pieces of a phosphorus-implanted silicon wafer that was previously used in a round-robin study of SIMS measurement repeatability. Standards were prepared by depositing micro litre amounts of a standardized phosphorus solution on aluminum foil. A non-implanted silicon wafer was analysed as a blank. Samples were irradiated at a neutron fluency rate of 1 x 10 14 cm -2 s -1 to convert 31 P to 32 P, then mixed with milligram amounts of phosphorus carrier and dissolved in a mixture of nitric and hydrofluoric acids. Phosphorus was separated from the matrix by precipitation first as ammonium phosphomolybdate then as magnesium ammonium phosphate. The yield (fraction of recovered carrier) was determined gravimetrically as Mg(NH 4 )PO 4 .6H 2 O. 32 P was measured using a beta proportional counter. The measurements yielded a mean and standard deviation of (8.35 ± 0.20) x 10 14 atoms.cm -2 (relative standard deviation = 2.35 %), in agreement with both the nominal

  12. Geriatric information analysis of the molecular properties of mexidole

    Directory of Open Access Journals (Sweden)

    O. A. Gromova

    2017-01-01

    Full Text Available Objective: by using the pharmacoinformation profiling, to comprehensively assess all possible effects of the molecules of mexidol, choline alfoscerate, piracetam, glycine, and semax in accordance with the anatomical therapeutic and chemical (ATC classification system.Material and methods. Chemoreactomic, pharmacoinformation, and geriatric information analyses of the properties of the molecules are based on chemoreactomic methodology. The chemoreactomic analysis uses the information from the PubChem, HMDB, and String databases; the pharmacoinformation analysis applies the information from the international ATC classification and a combined sample of data from the Therapeutic Target Database (TTD, SuperTarget, Manually Annotated Targets and Drugs Online Resource (MATADOR, and Potential Drug Target Database (PDTD; geriatric information analysis employs the data on the geroprotective effect of individual substances from the PubChem database and the data available in the literature data on geroprotection from the PubMed database, which have been collected through the artificial intelligence system.Results and discussion. Mexidol is characterized by the maximum set of positive effects (the drug is used to treat CNS and cardiovascular diseases and metabolic disorders and has anti-inflammatory and anti-infective properties, etc.. Mexidol and glycine are predicted to cause the lowest frequency of adverse reactions, such as itching, constipation, paresthesia, vomiting, etc. Geriatric information assessments of changes in the life span of model organisms have shown that mexidol contributes to the higher life expectancy of C. elegans (by 22.7±10%, Drosophila (by 14.4±15%, and mice (by 14.6±3%; the control drugs do by no more than 6.1%.Conclusion. The results of the study indicate that mexidol has a high potential to be used as a geroprotector.

  13. Rescaled Range Analysis and Detrended Fluctuation Analysis: Finite Sample Properties and Confidence Intervals

    Czech Academy of Sciences Publication Activity Database

    Krištoufek, Ladislav

    4/2010, č. 3 (2010), s. 236-250 ISSN 1802-4696 R&D Projects: GA ČR GD402/09/H045; GA ČR GA402/09/0965 Grant - others:GA UK(CZ) 118310 Institutional research plan: CEZ:AV0Z10750506 Keywords : rescaled range analysis * detrended fluctuation analysis * Hurst exponent * long-range dependence Subject RIV: AH - Economics http://library.utia.cas.cz/separaty/2010/E/kristoufek-rescaled range analysis and detrended fluctuation analysis finite sample properties and confidence intervals.pdf

  14. High sensitivity neutron activation analysis of environmental and biological standard reference materials

    International Nuclear Information System (INIS)

    Greenberg, R.R.; Fleming, R.F.; Zeisler, R.

    1984-01-01

    Neutron activation analysis is a sensitive method with unique capabilities for the analysis of environmental and biological samples. Since it is based upon the nuclear properties of the elements, it does not suffer from many of the chemical effects that plague other methods of analysis. Analyses can be performed either with no chemical treatment of the sample (instrumentally), or with separations of the elements of interest after neutron irradiation (radiochemically). Typical examples of both types of analysis are discussed, and data obtained for a number of environmental and biological SRMs are presented. (author)

  15. Growth of a manganese nodule from Peru Basin: a radiochemical anatomy

    International Nuclear Information System (INIS)

    Reyss, J.L.; Lemaitre, N.; Marchig, V.; Southon, J.R.; Nelson, D.E.; Vogel, J.S.

    1985-01-01

    Attempts have been made to study the entire growth history of a manganese nodule from the northern part of Peru Basin in the Pacific using radiochemical profiles of 230 Th/ 232 Th, 227 Th/ 230 Th and 10 Be/ 9 Be. Combined with the observations on Fe-Mn contents and textural variation, the radiochemical data indicate that the nodule grew more or less concentrically throughout most of its existence since it formed 1.5 my ago, receiving Mn from both bottom water and pore water. This condition appeared to have changed about 180 ky ago when the growth became asymmetric in that the top and bottom sides became fixed in their relative positions on the sea floor. Since then, the bottom side accreted with a fast rate of close to 200 mm/my, apparently fueled by the supply of diagenetically remobilized Mn in pore water from the sediment substrate. In the meantime, the topside accumulated at about 6 mm/my, a value which is in the normal range for deep-sea nodules having their Mn supplied from the hydrogenous source. (author)

  16. A direct reading on-line flowrate meter for use in radiochemical plant

    International Nuclear Information System (INIS)

    Shah, B.V.; Kaimal, C.K.R.; Siddiqui, I.A.; Kumar, S.V.

    1987-01-01

    A device for measurement and remote direct reading display of the flowrates of streams in a radiochemical plant is described. The device is interposed in the measured stream and consists of a syphon pot with a specially developed attachment on the discharge line. Differential pressure switches are used to trigger a timer device at set levels in the pot and the time required for filling the pot during each cycle is measured and is used to compute and display the flowrate. The device is accurate and reliable and is simple to fabricate and install. It is maintenance-free since it has no moving parts. It is also suggested that a manometer with conductive contacts could be used in place of the d.p. switches. The background and various stages of development of the device are described. The operating data is tabulated and parameters required for plant applications are indicated in detail. A simple method to detect and correct for errors due to drift in d.p. switch setting is also outlined. Sketches of typical syphon pot, the schematic of the apparatus and suggested layout for application in radiochemical plant are also included. (author). 11 figures, 6 tables

  17. Engineering Properties and Correlation Analysis of Fiber Cementitious Materials

    Directory of Open Access Journals (Sweden)

    Wei-Ting Lin

    2014-11-01

    Full Text Available This study focuses on the effect of the amount of silica fume addition and volume fraction of steel fiber on the engineering properties of cementitious materials. Test variables include dosage of silica fume (5% and 10%, water/cement ratio (0.35 and 0.55 and steel fiber dosage (0.5%, 1.0% and 2.0%. The experimental results included: compressive strength, direct tensile strength, splitting tensile strength, surface abrasion and drop-weight test, which were collected to carry out the analysis of variance to realize the relevancy and significance between material parameters and those mechanical properties. Test results illustrate that the splitting tensile strength, direct tensile strength, strain capacity and ability of crack-arresting increase with increasing steel fiber and silica fume dosages, as well as the optimum mixture of the fiber cementitious materials is 5% replacement silica fume and 2% fiber dosage. In addition, the Pearson correlation coefficient was conducted to evaluate the influence of the material variables and corresponds to the experiment result.

  18. Analysis of nonlinear optical properties in donor–acceptor materials

    Energy Technology Data Exchange (ETDEWEB)

    Day, Paul N. [Air Force Research Laboratory, Wright-Patterson Air Force Base, Ohio 45433 (United States); General Dynamics Information Technology, Inc., Dayton, Ohio 45431 (United States); Pachter, Ruth [Air Force Research Laboratory, Wright-Patterson Air Force Base, Ohio 45433 (United States); Nguyen, Kiet A. [Air Force Research Laboratory, Wright-Patterson Air Force Base, Ohio 45433 (United States); UES, Inc., Dayton, Ohio 45432 (United States)

    2014-05-14

    Time-dependent density functional theory has been used to calculate nonlinear optical (NLO) properties, including the first and second hyperpolarizabilities as well as the two-photon absorption cross-section, for the donor-acceptor molecules p-nitroaniline and dimethylamino nitrostilbene, and for respective materials attached to a gold dimer. The CAMB3LYP, B3LYP, PBE0, and PBE exchange-correlation functionals all had fair but variable performance when compared to higher-level theory and to experiment. The CAMB3LYP functional had the best performance on these compounds of the functionals tested. However, our comprehensive analysis has shown that quantitative prediction of hyperpolarizabilities is still a challenge, hampered by inadequate functionals, basis sets, and solvation models, requiring further experimental characterization. Attachment of the Au{sub 2}S group to molecules already known for their relatively large NLO properties was found to further enhance the response. While our calculations show a modest enhancement for the first hyperpolarizability, the enhancement of the second hyperpolarizability is predicted to be more than an order of magnitude.

  19. Physicochemical properties and analysis of Malaysian palm fatty acid distilled

    Science.gov (United States)

    Jumaah, Majd Ahmed; Yusoff, Mohamad Firdaus Mohamad; Salimon, Jumat

    2018-04-01

    Palm fatty acid distillate (PFAD) is cheap and valuable byproduct of edible oil processing industries. This study was carried out to determine the physicochemical properties of Malaysian palm fatty acid distilled (PFAD). The physicochemical properties showed that the free fatty acid (FFA %), acid value, iodine value, saponification value, unsaponifiable matter, hydroxyl value, specific gravity at 28°C, moisture content, viscosity at 40°C and colour at 28°C values were 87.04± 0.1 %, 190.6± 1 mg/g, 53.3±0.2 mg/g, 210.37±0.8 mg/g, 1.5±0.1%, 47±0.2 mg/g, 0.87 g/ml, 0.63 %, 30 cSt and yellowish respectively. Gas chromatography (GC) was used to determine the fatty acid (FA) composition in PFAD. The fatty acids were found to be comprised mostly with 48.9 % palmitic acid (C16:0), 37.4 % oleic acid (C18:1), 9.7 % linoleic acid (C18:2), 2.7 % stearic acid (C18:0) and 1.1 % myristic acid (C14:0). The analysis of high performance liquid chromatography (HPLC) has resulted with 99.2 % of FFA, while diacylglycerol and monoacylglycerol were 0.69 and 0.062 % respectively.

  20. The fluorescence properties and NMR analysis of protopine and allocryptopine

    International Nuclear Information System (INIS)

    Kubala, Martin; Vacek, Jan; Popa, Igor; Janovska, Marika; Kosina, Pavel; Ulrichova, Jitka; Travnicek, Zdenek; Simanek, Vilim

    2011-01-01

    The fluorescence properties of protopine and allocryptopine in aqueous and organic environments are described for the first time. The fluorescence of alkaloids and their pH-dependent interconversion to cationic forms (transannular interaction) were studied using steady-state and time-resolved fluorescence techniques. For the analysis of tricyclic base and cis/trans tetracyclic cations of the alkaloids, NMR and X-ray crystallography were used. - Highlights: → We describe fundamental fluorescence characteristics of alkaloids protopine and allocryptopine. → We analyzed the pH-dependent transitions and cis/trans isomerization. → These two alkaloids can be better distinguished by their fluorescence decay characteristics. → The fluorescence parameters are related to the NMR and crystallographic structural data.

  1. ECG scaling properties of cardiac arrhythmias using detrended fluctuation analysis

    International Nuclear Information System (INIS)

    Rodriguez, E; Echeverria, J C; Alvarez-Ramirez, J; Lerma, C

    2008-01-01

    We applied detrended fluctuation analysis to characterize at very short time scales during episodes of cardiac arrhythmias the raw electrocardiogram (ECG) waveform, aiming to get a global insight into its dynamical behaviour in patients who experienced sudden death. We found that in 15 recordings involving different types of arrhythmias (taken from PhysioNet's Sudden Cardiac Death Holter Database), the ECG waveform, besides showing a less-random dynamics, becomes more regular during bigeminy, ventricular tachycardia or even atrial fibrillation and ventricular fibrillation. The ECG waveform scaling properties thus suggest that reduced complexity dominates the underlying mechanisms of arrhythmias. Among other explanations, this may result from shorted or restricted (i.e. less diverse) pathways of conduction of the electrical activity within ventricles

  2. HPLC-ICP-MS compared with radiochemical detection for metabolite profiling of H-3-bromohexine in rat urine and faeces

    DEFF Research Database (Denmark)

    Jensen, B.P.; Gammelgaard, B.; Hansen, S.H.

    2005-01-01

    H-3-Bromohexine was dosed to rats as a model compound to allow comparison of HPLC-ICP-MS detection on bromine to radiochemical detection in an in vivo drug metabolism study. Metabolite profiles were obtained in urine and faeces extracts. No influence of the methanol gradient on the bromine response...... was observed in the range of 18 - 75% methanol. The sensitivity obtained by HPLC- ICP-MS was almost two orders of magnitude better than on-line H-3 radiochemical detection. For ICP- MS, the limit of detection was calculated to be 69 nM Br ( injection volume 100 mu l), corresponding to an absolute limit...

  3. Calculation of partial derivatives of thermophysical properties of sodium for safety analysis

    International Nuclear Information System (INIS)

    Shan Jianqiang; Qiu Suizhang; Zhu Jizhou; Zhang Guiqin

    1997-01-01

    According to the characters of safety analysis of LMFBR, the partial derivatives formula of some special thermophysical properties of sodium, including single-and two-phase properties, are calculated based on the basic Maxwell equations, and on the formulae of basic thermophysical properties of sodium which were verified abroad. The present study can provide theoretical base for safety analysis of LMFBR

  4. Properties of autoregressive model in reactor noise analysis, 1

    International Nuclear Information System (INIS)

    Yamada, Sumasu; Kishida, Kuniharu; Bekki, Keisuke.

    1987-01-01

    Under appropriate conditions, stochastic processes are described by the ARMA model, however, the AR model is popularly used in reactor noise analysis. Hence, the properties of AR model as an approximate representation of the ARMA model should be made clear. Here, convergence of AR-parameters and PSD of AR model were studied through numerical analysis on specific examples such as the neutron noise in subcritical reactors, and it was found that : (1) The convergence of AR-parameters and AR model PSD is governed by the ''zero nearest to the unit circle in the complex plane'' (μ -1 ,|μ| M . (3) The AR model of the neutron noise of subcritical reactors needs a large model order because of an ARMA-zero very close to unity corresponding to the decay constant of the 6-th group of delayed neutron precursors. (4) In applying AR model for system identification, much attention has to be paid to a priori unknown error as an approximate representation of the ARMA model in addition to the statistical errors. (author)

  5. Relativistic analysis of the electromagnetic properties of the deuteron

    International Nuclear Information System (INIS)

    Hummel, E.

    1991-01-01

    In this thesis the electromagnetic properties of the deuteron are studied. A relativistic description is constructed starting from a quasi-potential approach of the bethe-Salpeter equation, which treats dynamical and electromagnetical properties in a consistent way. This is applied on elastic as well as inelastic electron-deuteron scattering. In ch. 2 the formalism of electromagnetic scattering in the one-photon exchange approximation is described. The general form of the electromagnetic deuteron current operator and the consequences of current conservation are discussed. The deuteron current operator is constructed in a simple quasipotential approximation model. Ch. 3 discusses elastic electron-deuteron scattering. The ρπγ and ωεγ MEC contributions are taken into account and the results are compared to the experimental data for both the electric and magnetic form factor. In particular, the usual non-relativistic reduction of the two-body current operators is studied. In ch. 4 some improvements are made on the simple approximation model. In this improved model at the same time both elastic and breakup processes can be treated. The differences with the simple model are the treatment of the initial and final states and the propagator structure. The isovector two-body currents are constructed using the OBE-model, where the complications due to the use of strong form factors at the meson-nucleon vertices are accounted for. The results for elastic scattering using the improved model are compared with the results of ch. 3. Finally in ch. 5 the model developed in ch. 4 is used to describe the electro-desintegration of the deuteron. The recent experiments at NIKHEF are discussed in the PWIA approximation also with FSI included. In the analysis of the threshold experiments the π-MEC are included. In both experiments relativistic effects and in the threshold experiment also the controversy about the form factor in the MEC, are discussed. (author). 61 refs.; 40 figs

  6. A radio-high-performance liquid chromatography dual-flow cell gamma-detection system for on-line radiochemical purity and labeling efficiency determination

    DEFF Research Database (Denmark)

    Lindegren, S; Jensen, H; Jacobsson, L

    2014-01-01

    In this study, a method of determining radiochemical yield and radiochemical purity using radio-HPLC detection employing a dual-flow-cell system is evaluated. The dual-flow cell, consisting of a reference cell and an analytical cell, was constructed from two PEEK capillary coils to fit into the w...

  7. Monitoring, controlling and safeguarding radiochemical streams at spent fuel reprocessing facilities with optical and gamma-ray spectroscopic methods

    International Nuclear Information System (INIS)

    Schwantes, J.M.; Bryan, S.A.; Orton, C.R.; Levitskaia, T.G.; Fraga, C.G.

    2013-01-01

    The International Atomic Energy Agency (IAEA) has established international safeguards standards for fissionable material at spent fuel reprocessing plants to ensure that significant quantities of weapons-usable nuclear material are not diverted from these facilities. For large throughput nuclear facilities, it is difficult to satisfy the IAEA safeguards accountancy goal for detection of abrupt diversion. Currently, methods to verify material control and accountancy (MCA) at these facilities require time-consuming and resource intensive destructive assay (DA). Leveraging new on-line non-destructive assay (NDA) process monitoring techniques in conjunction with the traditional and highly precise DA methods may provide an additional measure to nuclear material accountancy which would potentially result in a more timely, cost-effective and resource efficient means for safeguards verification at such facilities. By monitoring process control measurements (e.g. flowrates, temperatures, or concentrations of reagents, products or wastes), abnormal plant operations can be detected. Pacific Northwest National Laboratory (PNNL) is developing on-line NDA process monitoring technologies based upon gamma-ray and optical spectroscopic measurements to potentially reduce the time and resource burden associated with current techniques. The Multi-Isotope Process (MIP) Monitor uses gamma spectroscopy and multivariate analysis to identify off-normal conditions in process streams. The spectroscopic monitor continuously measures chemical compositions of the process streams including actinide metal ions (U, Pu, Np), selected fission products, and major stable flowsheet reagents using UV-Vis, Near IR and Raman spectroscopy. Multi-variate analysis is also applied to the optical measurements in order to quantify concentrations of analytes of interest within a complex array of radiochemical streams. This paper will provide an overview of these methods and reports on-going efforts to develop

  8. A combined simple bubbling method with high performance liquid chromatography purification strategy, higher radiochemical yield and purity and faster preparation of carbon-11-raclopride.

    Science.gov (United States)

    Huang, Huacheng; Ning, Yanli; Zhang, Bucheng; Lou, Cen

    2015-01-01

    Carbon-11-raclopride (¹¹C-R) is a positron-emitting radiotracer successfully used for the study of cognitive control and widely applied in PET imaging. A simple automated preparation of ¹¹C-R by using the reaction of carbon-(11)-methyl triflate (¹¹C-MeOTF) or ¹¹C-methyl iodide (¹¹C-MeI) with demethylraclopride is described. Specifically we used a simple setup applied an additional "U" reaction vessel for ¹¹C-MeOTf compared with ¹¹C-MeI and assessed the influence of several solvents and of the amount of the percussor for ¹¹C-methylation of demethylraclopride by the bubbling method. The reversal of retention order between product and its precursor has been achieved for ¹¹C-R, enabling collection of the purified ¹¹C-R by using the HPLC column after shorter retention time. By the improved radiosynthesis and purification strategy, ¹¹C-R could be prepared with higher radiochemical yield than that of the previous studies. The yield for ¹¹C-MeOTf was 76% and for ¹¹C-CH3I >26% and with better radiochemical purity (>99% based on both ¹¹C-MeOTf and ¹¹C-MeI) as compared to the previously obtained purity of ¹¹C-R using HPLC method with acetonitrile as a part of mobile phase. Furthermore, by using ethanol as the organic modifier, residual solvent analysis prior to human injection could be avoided and ¹¹C-R could be injected directly following simple dilution and sterile filtration. Improved radiosynthesis and HPLC purification in combination with ethanol containing eluent, extremely shortened the time for preparation of ¹¹C-R, gave a higher radiochemical yield and purity for ¹¹C-R and can be used for multiple and faster synthesis of ¹¹C-R and probably for other ¹¹C-labeled radiopharmaceuticals.

  9. Metrological aspects of radiochemical methods for determining activity of gamma-emitting nuclides

    International Nuclear Information System (INIS)

    Shcherbakov, B.Y.

    1986-01-01

    The author considers the problem of metrological compatibility of the two stages in the radiochemical method of determining the activity of a gamma-emitting nuclide: chemical isolation of the nuclide and radiometric measurement of its activity. The authors show that preparation of the specimen in liquid form provides for important advantages compared with the traditional application of the solid residue onto a flat substate. The work here is of interest for analytical chemists who are involved with determination of the activity of gamma emitting nuclides such as Ru 103, Rh 106, Sn 113, Cs 134, Cs 137, La 140, Ce 141, Ce 144, Hg 203, Na 24, Mn 54, Fe 59, Co 60, Zn 65, Zr 95, and Nb 95, for example, in waste water or in emissions to the atmosphere, with the goal of protecting the environment

  10. Hanford Environmental Restoration data validation process for chemical and radiochemical analyses

    International Nuclear Information System (INIS)

    Adams, M.R.; Bechtold, R.A.; Clark, D.E.; Angelos, K.M.; Winter, S.M.

    1993-10-01

    Detailed procedures for validation of chemical and radiochemical data are used to assure consistent application of validation principles and support a uniform database of quality environmental data. During application of these procedures, it was determined that laboratory data packages were frequently missing certain types of documentation causing subsequent delays in meeting critical milestones in the completion of validation activities. A quality improvement team was assembled to address the problems caused by missing documentation and streamline the entire process. The result was the development of a separate data package verification procedure and revisions to the data validation procedures. This has resulted in a system whereby deficient data packages are immediately identified and corrected prior to validation and revised validation procedures which more closely match the common analytical reporting practices of laboratory service vendors

  11. The determination of the radiochemical purity of 99Tcm-DTPA-HSA injection

    International Nuclear Information System (INIS)

    Yin Guangrong; Zhang Yan

    1996-01-01

    A simple, rapid analytical method of radiochemical purity for the 99 Tc m -DTPA-HSA injection is established. 99 Tc m (VII), 99 Tc m (IV) and labelled compound 99 Tc m -DTPA-HSA are separated by two systems of paper chromatography on Whatman No.1. The solvent of the system A is 85% methanol and that of the system B is water-95% alcohol-ammonium hydroxide (volume ratio is 5:2:1). 90 Tc m (IV) and labelled compound are located at the origin, while R f of 99 Tc m (VII) is about 0.4-0.5 in the system A. R f of 99 Tc m (VII) and labelled compound are about 0.7-0.8, while 99 Tc m (IV) is located at the origin in the system B

  12. Limits of the radiochemical and geochemical method for the test of nucleon stability

    Energy Technology Data Exchange (ETDEWEB)

    Bergamasco, L [CNR, Laboratorio di Cosmo-Geofisica, Turin, Italy; Texas A and M University, College Station, Tex.); Cini, G [CNR, Laboratorio di Cosmo-Geofisica; Torino, Universita, Turin, Italy)

    1978-07-01

    An estimate is obtained for the limiting nucleon lifetime that can be determined by the radiochemical method of Steinberg and Evans (1977), which counts the Ar-37 production from reactions due to nucleon decay in a large sample of KC2H3O2. To estimate the background rate, processes due to the atmospheric muon component are considered. It is found that the asymptotic limit on the maximum value of the nucleon lifetime is 2 x 10/sup 30/years. This value cannot be increased by going to larger depths or by using a larger sample, but is inherent in the method itself. To improve the limit one would have to resort to methods based on multiparticle decay modes.

  13. Thorium base fuels reprocessing at the L.P.R. (Radiochemical Processes Laboratory) experimental plant

    International Nuclear Information System (INIS)

    Almagro, J.C.; Dupetit, G.A.; Deandreis, R.A.

    1987-01-01

    The availability of the LPR (Radiochemical Processes Laboratory) plant offers the possibility to demonstrate and create the necessary technological basis for thorium fuels reprocessing. To this purpose, the solvents extraction technique is used, employing TBP (at 30%) as solvent. The process is named THOREX, a one-cycle acid, which permits an adequate separation of Th 232 and U 233 components and fission products. For thorium oxide elements dissolution, the 'chopp-leach' process (installed at LPR) is used, employing a NO 3 H 13N, 0.05M FH and 0.1M Al (NO 3 ) 3 , as solvent. To adapt the pilot plant to the flow-sheet requirements proposed, minor modifications must be carried out in the interconnection of the existing decanting mixers. The input of the plant has been calculated by Origin Code modified for irradiations in reactors of the HWR type. (Author)

  14. Radiochemical separation and effective dose estimation due to ingestion of 90Sr

    International Nuclear Information System (INIS)

    Ilic, Z.; Vidic, A.; Deljkic, D.; Sirko, D.; Zovko, E.; Samek, D.

    2009-01-01

    Since 2007. Institute for Public Health of Federation of Bosnia and Herzegovina-Radiation Protection Centre, within the framework of monitoring of radioactivity of environment carried out measurement of specific activity of 90 Sr content in selected food and water samples. The paper described the methods of measurement and radiochemical separation. Presented results, as average values of specific activity of 90 Sr, were used for estimation of effective dose due to ingestion of 90 Sr for 2007. and 2008. Estimated effective dose for 2007. due to ingestion of 90 Sr for adults was 1,36 μSv and 2,03 μSv for children (10 year old), and for 2008. 0,67 μSv (adults) and 1,01 μSv (children 10 year old). Estimated effective doses for 2007. and 2008. are varied because of different average specific activity radionuclide 90 Sr in selected samples of food, their number, species and origin. (author) [sr

  15. Determination of radiochemical yields of 186Re-labelled complexes using thin layer chromatography

    International Nuclear Information System (INIS)

    Konirova, R.; Kohlickova, M.; Jedinakova-Krizova, V.

    1999-01-01

    The reaction conditions for synthesis of three rhenium complexes 186 Re-methylendiphosphonate (MDP), 186 Re-hydroxyethylidendiphosphonate (HEDP) and 186 Re-citrate have been investigated. Radiochemical yield of complexation has been determined by thin layer chromatography and paper chromatography. The rhenium complexation with corresponding ligand is dependent on pH values of reaction mixture, concentration of studied ligand (MDP, HEDP and sodium citrate) and concentration of reducing agent. Stannous chloride with ascorbic acid (as antioxidant) was used for reduction of perrhenate. The labeling yield of 186 Re-MDP was about 90 %, of 186 Re-HEDP more than 80 % and more than 75 % for 186 Re-citrate under optimum conditions. Besides, the possibility of application of porphyrins as organic ligands for complexation with rhenium isotopes is examined. (authors)

  16. Investigation of the possibility of using hydrogranulation in reprocessing radioactive wastes of radiochemical production facilities

    Energy Technology Data Exchange (ETDEWEB)

    Revyakin, V.; Borisov, L.M. [All Russian Scientific and Research Institute of Non-Organic Materials, Moscow (Russian Federation)

    1996-05-01

    Radio-chemical production facilities are constantly accumulating liquid radioactive wastes (still residues as the result of evaporation of extraction and adsorption solutions etc.) which are a complex multicomponent mixtures. The wastes are frequently stored for extended periods of time while awaiting disposition and in some cases, and this is much worse, they are released into the environment. In this report, I would like to draw your attention to some results we have obtained from investigations aimed at simplifying handing of such wastes by the precipitation of hard to dissolve metal hydroxides, the flocculation of the above into granules with the help of surface-active agents (in this case a polyacrylamide - PAA), quickly precipitated and easily filtered. The precipitate may be quickly dried and calcinated, if necessary, and transformed into a dense oxide sinter. In other words it may be transformed into a material convenient for storage or burial.

  17. Radiochemical determination of Inertial Confinement Fusion capsule compression at the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Shaughnessy, D. A., E-mail: shaughnessy2@llnl.gov; Moody, K. J.; Gharibyan, N.; Grant, P. M.; Gostic, J. M.; Torretto, P. C.; Wooddy, P. T.; Bandong, B. B.; Cerjan, C. J.; Hagmann, C. A.; Caggiano, J. A.; Yeamans, C. B.; Bernstein, L. A.; Schneider, D. H. G.; Henry, E. A.; Fortner, R. J. [Lawrence Livermore National Laboratory, 7000 East Avenue, Livermore, California 94551 (United States); Despotopulos, J. D. [Lawrence Livermore National Laboratory, 7000 East Avenue, Livermore, California 94551 (United States); Radiochemistry Program, University of Nevada Las Vegas, Las Vegas, Nevada 89154 (United States)

    2014-06-15

    We describe a radiochemical measurement of the ratio of isotope concentrations produced in a gold hohlraum surrounding an Inertial Confinement Fusion capsule at the National Ignition Facility (NIF). We relate the ratio of the concentrations of (n,γ) and (n,2n) products in the gold hohlraum matrix to the down-scatter of neutrons in the compressed fuel and, consequently, to the fuel's areal density. The observed ratio of the concentrations of {sup 198m+g}Au and {sup 196g}Au is a performance signature of ablator areal density and the fuel assembly confinement time. We identify the measurement of nuclear cross sections of astrophysical importance as a potential application of the neutrons generated at the NIF.

  18. Radiochemical purity and in vitro stability of Tc-99m radiopharmaceuticals

    International Nuclear Information System (INIS)

    Vucina, J.

    2001-01-01

    The increased contents of long lived 99 Tc, oxygen and cupric ions could affect the labeling yield of eight radiopharmaceuticals. Oxygen and in leaser extend copper were found to affect the radiochemical purity of the preparations. In vitro stability of radiopharmaceuticals, examined on 99m Tc(Sn)-pyrosphoshate solutions, was extended when ascorbic acid was added as the chemical stabilizer. The quantity of 5x10 -7 mol/dm 3 of ascorbic acid was found to be sufficient to keep the content of 99m Tc-pertechnetate below 1 % six hours after labeling even in the cases when 99m Tc was present in high radioactive concentrations (740-814 GBq/dm 3 ). The results led to the development of the kits in which ascorbic or gentisic acid are the standards component in the kit composition (author)

  19. Radiochemical analyses of surface water from U.S. Geological Survey hydrologic bench-mark stations

    Science.gov (United States)

    Janzer, V.J.; Saindon, L.G.

    1972-01-01

    The U.S. Geological Survey's program for collecting and analyzing surface-water samples for radiochemical constituents at hydrologic bench-mark stations is described. Analytical methods used during the study are described briefly and data obtained from 55 of the network stations in the United States during the period from 1967 to 1971 are given in tabular form.Concentration values are reported for dissolved uranium, radium, gross alpha and gross beta radioactivity. Values are also given for suspended gross alpha radioactivity in terms of natural uranium. Suspended gross beta radioactivity is expressed both as the equilibrium mixture of strontium-90/yttrium-90 and as cesium-137.Other physical parameters reported which describe the samples include the concentrations of dissolved and suspended solids, the water temperature and stream discharge at the time of the sample collection.

  20. Radiochemical method for evaluating the effect of antibiotics on Escherichia coli biofilms

    International Nuclear Information System (INIS)

    Dix, B.A.; Cohen, P.S.; Laux, D.C.; Cleeland, R.

    1988-01-01

    A simple radiochemical method for evaluating the action of antibiotics on Escherichia coli cells in biofilms is reported. After growth, biofilms of E. coli ATCC 25922 on disks of urinary catheter material were suspended in fresh medium containing or lacking an antibiotic, incubated for 4 h at 37 degrees C, and pulse-labeled with [ 3 H]leucine for 5 min. Radioactivity in trichloracetic acid-precipitable material in the biofilm and in the surrounding medium (planktonic E. coli) was then measured. Antibiotic-induced inhibition of incorporation of [ 3 H]leucine into the cells in the biofilm was far less pronounced than incorporation into planktonic cells and, furthermore, correlated well with loss in viable counts. The method is simple, inexpensive, and extremely timesaving

  1. The study of radiochemical separation methods on gaseous Fission product krypton-88

    International Nuclear Information System (INIS)

    Yang Zhihong; Zhang Shengdong; Yang Lei; Ding Youqian; Sun Hongqing; Ma Peng

    2012-01-01

    Half-life of krypton-88 is 2.84 hours, high fission yields and a relatively large gamma branching ratio is had. The gas is short-lived fission products in burnup measurements. Only New fission products can extract from extraction in gas of fissile irradiation target. But krypton-88 with krypton-85, krypton-87, xenon -135, and xenon-138 is coexisted together, thus radiochemical separation must quickly taken. selected the irradiation time is 1-2 hours and cooling time is best 2 hours for sample preparation, krypton and xenon were separated using activated carbon adsorption, the ratio of krypton and xenon were measured by gamma spectroscopy. Then according to the ratio of krypton-85 and xenon-125 count rate coefficient around separation were calculated yield of krypton and decontamination factor of xenon and the final the yield of krypton-85 is calculated. (authors)

  2. A radiochemical assay for detection of leukotriene B4 production from isolated cells

    International Nuclear Information System (INIS)

    Aharony, D.; Dobson, P.; Krell, R.D.

    1984-01-01

    A radiochemical procedure for quantitating the effect of inhibitors of leukotriene B4 (LTB4) biosynthesis is described. Rat peritoneal cells were labeled with 3 H-arachidonic acid and stimulated with the calcium ionophore A23187. 3 H-LTB4 was isolated by processing on C18-Sep Pak cartridges followed by reverse-phase high pressure liquid chromatography (HPLC). The identity of this product, as well as other arachidonic acid metabolites, was verified by using silicic acid column chromatography followed by straight-phase HPLC and thin layer chromatography. Using this assay, LTB4 release by ionophore A23187 has been shown to be both time- and concentration-dependent. Indomethacin enhanced, while NDGA and ETYA inhibited, the A23187-induced production of LTB4. This procedure is both simple and direct and is capable of assessing the ability of novel compounds to alter LTB4 production

  3. A radiochemical procedure for the determination of Po-210 in environmental samples

    International Nuclear Information System (INIS)

    Godoy, J.M.; Schuettelkopf, H.

    1980-07-01

    A radiochemical procedure for the determination of Po-210 in environmental samples was developed. Soil, sediments, filter materials, plants, water and food samples can be analyzed for Po-210. Wet ashing is achieved with HNO 3 + H 2 O 2 or HCl + HNO 3 . To separate disturbing substances, a coprecipitation with Te is used for sample materials containing silica. Po-210 deposition from HCl solution on Ag platelets with other sample materials is possible directly. Deposited Po-210 is counted by α-spectrometry. For chemical yield determination Po-208 is added, yields range between 60% and 100%. A lower detection limit of about 0,002 pCi Po-210/sample is achievable. (orig./HP) [de

  4. Groundwater quality in wells in central rural Finland: a microbiological and radiochemical survey

    International Nuclear Information System (INIS)

    Korhonen, L.; Niskanen, M.; Heinonen-Tanski, H.; Martikainen, P.J.; Salonen, L.; Taipalinen, I.

    1996-01-01

    The microbiological, physicochemical, and radiochemical water quality from samples of 150 rural wells in Finland was analyzed. Organic matter exceeded 12 mg KMnO4 L(-1) in 63% and nitrate 25 mg NO3 L(-1) in 29% of the wells. NO3--concentrations were higher in wells with cattle. Fecal coliforms and fecal streptococci were found in 10-40%. There was no direct positive correlation between heterotrophic and indicator bacteria. Salmonella or Campylobacter were not detected. Human pathogen Listeria monocytogenes was isolated from two and Yersinia enterocolitica serotypes O5 or O6 from four waters not containing fecal coliforms. Thus, the predictive value of fecal coliforms to indicate these pathogens is poor. Coliphages were found in seven wells. Mean concentrations of radon and long-lived alpha-active radionuclides were lower and those of beta-emitting radionuclides higher than the mean concentrations measured from groundwater in Finland. Radionuclides from the Chernobyl fallout were not detected

  5. Radiochemical applications of insoluble sulfate columns. Analytical possibilities in the field of the fission product solutions

    International Nuclear Information System (INIS)

    Barrachina, M.; Sauvagnac, R.

    1962-01-01

    In this paper we go on with our study of the heterogeneous ion-isotopic exchange in column. At present, we apply it to determine the radiochemical composition of the raw solutions used in the industrial recuperation of the long-lived fission products. The separation of the radioelements contained in these solutions is carried out mainly by making use of small columns, 1-3 cm height, of BaSO 4 or SrSO 4 , under selected experimental conditions. These columns behave like a special type of inorganic exchangers, working by absorption or by ion-isotopic exchange depending on the cases,a nd they provide the means for the selective separation of several important fission products employing very small volumes of fixing and eluting solutions. (Author) 11 refs

  6. Radiochemical synthesis of 3-(4-[18F] Fluorophenyl)-8-hydroxy-1, 2, 3, 4-tetrahydrochromeno [3, 4-c] pyridin-5-one: A putative dopamine D$4 receptor PET imaging agent

    International Nuclear Information System (INIS)

    Li, G.C.; Yin, D.Z.; Wang, M.W.; Cheng, D.F.; Wang, Y.X.

    2005-01-01

    Introduction: The dopamine D 4 receptor has lately received increasing interest since it has been hypothesized to be involved in the pathology and pharmacotherapy of schizophrenia. While this receptor is expressed in lower density in various extrastriatal brain regions and its distribution is still unclear due to the lack of suitable imaging agent and its level change in schizophrenia is controversial. Herein, based on the structure-activity analysis of chromeno[3, 4-c]pyridine- 5-ones as potential dopamine D 4 receptor ligands, a putative D 4 subtype positron emission tomography (PET) radioligand, 3-(4-[ 18 F]fluorophenyl)-8-hydroxy-1, 2, 3, 4-tetrahydrochromeno [3, 4-c]pyridin-5-one ([ 18 F]FHTP), was designed and synthesized. Methods: The radiochemical synthesis route was shown in Figure 1. [ 18 F]Fluoride was produced with a Cyclone-30 (IBA, Belgium) by 18 O(p, n) 18 F reaction using enriched 18 O-H 2 O and eluted from a Dowex 1-X8 anion-exchange column with aqueous potassium carbonate (20 mg/mL). 4-[ 18 F]Fluorobenzaldehyde was prepared according to the method reported by Alan A. Wilson and et al.. Then, 8-hydroxy-1, 2, 3, 4-tetrahydrochromeno [3, 4-c]pyridin-5-one, sodium cyanoborohydride, methanol and acetic acid were added to the dry residue, The mixture was then sealed and heated at 120 degree C for 12 min. At the end of the reaction, the mixture was cooled, diluted with ethyl acetate and washed with water. The extracted organic layer was passed through a small anhydrous magnesium sulfate column. After removal of the solvents in the mixture at 50 degree C under a stream of nitrogen, the obtained residue was redissolved in methanol and purified with a semi-preparative HPLC system, then the desired product was collected. Results: The radiochemical synthesis of [ 18 F]FHTP took around 110 min at EOS with an overall radiochemical yield 19% (decay-corrected) and its radiochemical purity was higher than 95%. Conclusion: A presumed dopamine D 4 receptor PET

  7. Obtention process of phosphorus 32 starting from commercial sulfur and design and construction of the radiochemical separation prototype

    International Nuclear Information System (INIS)

    Duarte A, C.; Alanis M, J.; Gutierrez R, C.

    2002-01-01

    In this work an obtention process of phosphorus 32 ( 32 P) in orthophosphoric acid form (H 3 32 PO 4 ) is described starting from commercial sulfur. Also the design and construction of the experimental prototype used in the radiochemical separation and their results in three tests carried out is reported. (Author)

  8. Radiochemical separations of hafnium, tantalum, and germanium from tungsten and selenium irradiated by 14 MeV neutrons

    International Nuclear Information System (INIS)

    Blachot, J.; Benabed, A.; Herment, J.; Monnand, E.

    1968-01-01

    Radiochemical separations of Hf, Ta and Ge from W and Se respectively, after 14 MeV-neutron irradiation. A new isotope: 79 Ge with a half-live of 50 ± 5 s and emitter of a 230 keV γ transition is observed. (authors) [fr

  9. Radiochemical and thermal studies of the copper(II)-exchanged form of synthetic zeolite linde sieve A

    International Nuclear Information System (INIS)

    Banerjee, S.P.

    1978-01-01

    Synthetic zeolite Linde Sieve A displays a double ion-sieve action. Only small cations can penetrate the single 6-rings into the beta cages. The radiochemical and thermal studies of copper(II)-exchanges form of 4A shows evidence of hydrated copper(II) ions in the zeolite structure. (author)

  10. Relative sensitivity analysis of the predictive properties of sloppy models.

    Science.gov (United States)

    Myasnikova, Ekaterina; Spirov, Alexander

    2018-01-25

    Commonly among the model parameters characterizing complex biological systems are those that do not significantly influence the quality of the fit to experimental data, so-called "sloppy" parameters. The sloppiness can be mathematically expressed through saturating response functions (Hill's, sigmoid) thereby embodying biological mechanisms responsible for the system robustness to external perturbations. However, if a sloppy model is used for the prediction of the system behavior at the altered input (e.g. knock out mutations, natural expression variability), it may demonstrate the poor predictive power due to the ambiguity in the parameter estimates. We introduce a method of the predictive power evaluation under the parameter estimation uncertainty, Relative Sensitivity Analysis. The prediction problem is addressed in the context of gene circuit models describing the dynamics of segmentation gene expression in Drosophila embryo. Gene regulation in these models is introduced by a saturating sigmoid function of the concentrations of the regulatory gene products. We show how our approach can be applied to characterize the essential difference between the sensitivity properties of robust and non-robust solutions and select among the existing solutions those providing the correct system behavior at any reasonable input. In general, the method allows to uncover the sources of incorrect predictions and proposes the way to overcome the estimation uncertainties.

  11. The Analysis of Differences in Residential Property Price Indices

    Directory of Open Access Journals (Sweden)

    Kokot Sebastian

    2014-10-01

    Full Text Available Residential property price indices can serve as a useful tool in the practice of real property market analysts, investment advisers, property developers, certified property appraisers, estate agents and managers. They can also be applied in property price valorization in specific legal positions. The Polish Act on Real Estate Management puts an obligation on the President of the Central Statistical Office to announce real property price indices, but the CSO fails to fulfill this obligation. The author’s rationale for this article is to contribute to works on rules of how to build property price indices. Presented within are the results of research on determining the price indices of such types of residential property as: a part of a building constituting a separate property and strata titles in housing cooperatives. The flats were divided into categories by floor area and by their location in 16 voivodeship capitals. The major purpose of the study is to prove that the prices of flats of different floor area change at different rates. Consequently, it seems worth considering whether a more detailed segmentation of the real estate market would be worthwhile for the sake of more accurate real property price indicators.

  12. Prediction of physicochemical properties of FCC feedstock by Chemometric analysis of their ultraviolet spectrum

    International Nuclear Information System (INIS)

    Baldrich Ferrer, Carlos A

    2008-01-01

    Chemometric analysis by Partial Least Squares (PLS) has been applied in this work to correlate the ultraviolet spectrum of combined Fluid Catalytic Cracking (FCC) feedstock with their physicochemical properties. The prediction errors obtained in the validation process using refinery samples demonstrate the accuracy of the predicted properties. This new analytical methodology allows obtaining in one analysis detailed information about the most important physicochemical properties of FCC feedstock and could be used as a valuable tool for operational analysis

  13. Experimental Analysis of Tensile Mechanical Properties of Sprayed FRP

    Directory of Open Access Journals (Sweden)

    Zhao Yang

    2016-01-01

    Full Text Available To study the tensile mechanical properties of sprayed FRP, 13 groups of specimens were tested through uniaxial tensile experiments, being analyzed about stress-strain curve, tensile strength, elastic modulus, breaking elongation, and other mechanical properties. Influencing factors on tensile mechanical properties of sprayed FRP such as fiber type, resin type, fiber volume ratio, fiber length, and composite thickness were studied in the paper too. The results show that both fiber type and resin type have an obvious influence on tensile mechanical properties of sprayed FRP. There will be a specific fiber volume ratio for sprayed FRP to obtain the best tensile mechanical property. The increase of fiber length can lead to better tensile performance, while that of composite thickness results in property degradation. The study can provide reference to popularization and application of sprayed FRP material used in structure reinforcement.

  14. Finite Element Method for Analysis of Material Properties

    DEFF Research Database (Denmark)

    Rauhe, Jens Christian

    and the finite element method. The material microstructure of the heterogeneous material is non-destructively determined using X-ray microtomography. A software program has been generated which uses the X-ray tomographic data as an input for the mesh generation of the material microstructure. To obtain a proper...... which are used for the determination of the effective properties of the heterogeneous material. Generally, the properties determined using the finite element method coupled with X-ray microtomography are in good agreement with both experimentally determined properties and properties determined using......The use of cellular and composite materials have in recent years become more and more common in all kinds of structural components and accurate knowledge of the effective properties is therefore essential. In this wok the effective properties are determined using the real material microstructure...

  15. Studying soil properties using visible and near infrared spectral analysis

    Science.gov (United States)

    Moretti, S.; Garfagnoli, F.; Innocenti, L.; Chiarantini, L.

    2009-04-01

    This research is carried out inside the DIGISOIL Project, whose purposes are the integration and improvement of in situ and proximal measurement technologies, for the assessment of soil properties and soil degradation indicators, going form the sensing technologies to their integration and their application in digital soil mapping. The study area is located in the Virginio river basin, about 30 km south of Firenze, in the Chianti area, where soils with agricultural suitability have a high economic value connected to the production of internationally famous wines and olive oils. The most common soil threats, such as erosion and landslide, may determine huge economic losses, which must be considered in farming management practices. This basin has a length of about 23 km for a basin area of around 60,3 Km2. Geological formations outcropping in the area are Pliocene to Pleistocene marine and lacustrine sediments in beds with almost horizontal bedding. Vineyards, olive groves and annual crops are the main types of land use. A typical Mediterranean climate prevails with a dry summer followed by intense and sometimes prolonged rainfall in autumn, decreasing in winter. In this study, three types of VNIR and SWIR techniques, operating at different scales and in different environments (laboratory spectroscopy, portable field spectroscopy) are integrated to rapidly quantify various soil characteristics, in order to acquire data for assessing the risk of occurrence for typically agricultural practice-related soil threats (swelling, compaction, erosion, landslides, organic matter decline, ect.) and to collect ground data in order to build up a spectral library to be used in image analysis from air-borne and satellite sensors. Difficulties encountered in imaging spectroscopy, such as influence of measurements conditions, atmospheric attenuation, scene dependency and sampling representation are investigated and mathematical pre-treatments, using proper algorithms, are applied and

  16. Determination of radiochemical yield of 99mTc radiopharmaceutical preparations using gamma counter and linear radiochromatography scanner

    International Nuclear Information System (INIS)

    Martins, Patricia de A.; Moura, Rebeca G.; Shiki, Andressa M.; Fukumori, Neuza T.O.; Matsuda, Margareth M.N.

    2013-01-01

    The radiochemical purity (RCP) evaluation is a prerequisite for radiopharmaceuticals before the administration in patients. RCP is defined as the proportion of the total radioactivity in the product that is present in the specified chemical form. The most widely used techniques for RCP determination in radiopharmaceutical preparations are thin layer chromatography (TLC-Al), instant thin layer chromatography (ITLC-SG) and paper chromatography (PC). These techniques combined with radioactivity detection are one of the most important tools in the RCP of the radiopharmaceutical compounds. Several methods are used for the determination of the spatial distribution of radioactivity on the strips. The aim of this study was to compare two methods for radioactivity measurement in the determination of RCP in 99m Tc radiopharmaceuticals using gamma counter and linear radiochromatography scanner. Lyophilized radiopharmaceuticals were labeled with 99m Tc. The analysis was carried out using TLC-Al and high performance thin layer chromatography (HPTLC-Cellulose) sheets, ITLC-SG and 3MM Whatman PC. The radioactivity distribution was determined by counting each strip during 1 minute in a radiochromatography TLC scanner. For comparison, the strips were cut into small pieces and each one was separately measured in a gamma-counter during 0.20 minutes in 70-210 KeV 99m Tc window. USP 36 and FDA specify that not less than 90% of the total radioactivity must be in the spot corresponding to 99m Tc labeled compound. In conclusion, the procedure for RCP determination of ALBUMINA-TEC, DEX500-TEC, ECD-TEC, MACRO-TEC and MIBI-TEC can be faster using radiochromatography. (author)

  17. Development of 99mTc labelled somatostatin analogues and evaluation of their radiochemical and biological behaviour

    International Nuclear Information System (INIS)

    Gano, L.; Patricio, L.

    2001-01-01

    Conjugates of two somatostatin analogues, octreotide and RC-160, with HYNIC were synthesized, characterized and purified by reverse phase HPLC. Radiolabelling of the conjugates with 99m Tc was achieved using tricine as co-ligand. High labelling efficiencies were obtained and 99m Tc peptides with high radiochemical purity were found when analysed both by ITLC and HPLC. In vitro stability of 99m Tc-peptides in human serum and towards cysteine challenge was determined by Cellogel electrophoresis and HPLC after ultrafiltration of serum solution through a 20 kDa cut off membrane. Biodistribution studies were performed in healthy mice at 5 and 30 minutes and 1, 2, 4 and 24 h post-injection. Urine and blood samples were collected at sacrifice time. Samples of urine and ultrafiltrate murine serum were analysed by electrophoresis and reverse phase HPLC in order to get some information about radiocompounds metabolism. Biological distribution of 99m Tc octreotide was also assayed in mice pre-treated with an excess of unlabelled peptide. From our results we conclude that this labelling method led to stable 99m Tc complexes both in vitro and in vivo when high specific activities (37-72 GBq/μmole) were used. Biodistribution studies of both 99m Tc-peptides indicated a radioactivity distribution profile with significant differences especially in the liver uptake that is higher for 99m Tc RC-160. However, a rapid blood clearance was obtained for both radiolabelled peptides, and the urine analysis indicated that 99m Tc peptide is mostly excreted as the initial complex. Pre-treatment with unlabelled peptide did not affect renal excretion of 99m TOC but pancreas and intestine radioactive uptake was significantly lower, indicating saturation of somatostatin receptors and selective uptake. (author)

  18. Determination of radiochemical yield of {sup 99m}Tc radiopharmaceutical preparations using gamma counter and linear radiochromatography scanner

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Patricia de A.; Moura, Rebeca G.; Shiki, Andressa M.; Fukumori, Neuza T.O.; Matsuda, Margareth M.N., E-mail: patyosborne@yahoo.com [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    The radiochemical purity (RCP) evaluation is a prerequisite for radiopharmaceuticals before the administration in patients. RCP is defined as the proportion of the total radioactivity in the product that is present in the specified chemical form. The most widely used techniques for RCP determination in radiopharmaceutical preparations are thin layer chromatography (TLC-Al), instant thin layer chromatography (ITLC-SG) and paper chromatography (PC). These techniques combined with radioactivity detection are one of the most important tools in the RCP of the radiopharmaceutical compounds. Several methods are used for the determination of the spatial distribution of radioactivity on the strips. The aim of this study was to compare two methods for radioactivity measurement in the determination of RCP in {sup 99m}Tc radiopharmaceuticals using gamma counter and linear radiochromatography scanner. Lyophilized radiopharmaceuticals were labeled with {sup 99m}Tc. The analysis was carried out using TLC-Al and high performance thin layer chromatography (HPTLC-Cellulose) sheets, ITLC-SG and 3MM Whatman PC. The radioactivity distribution was determined by counting each strip during 1 minute in a radiochromatography TLC scanner. For comparison, the strips were cut into small pieces and each one was separately measured in a gamma-counter during 0.20 minutes in 70-210 KeV {sup 99m}Tc window. USP 36 and FDA specify that not less than 90% of the total radioactivity must be in the spot corresponding to {sup 99m}Tc labeled compound. In conclusion, the procedure for RCP determination of ALBUMINA-TEC, DEX500-TEC, ECD-TEC, MACRO-TEC and MIBI-TEC can be faster using radiochromatography. (author)

  19. Comparative analysis of physicochemical properties of root perforation sealer materials

    Directory of Open Access Journals (Sweden)

    Maura Cristiane Gonçales Orçati Dorileo

    2014-08-01

    Full Text Available Objectives This study evaluated the solubility, dimensional alteration, pH, electrical conductivity, and radiopacity of root perforation sealer materials. Materials and Methods For the pH test, the samples were immersed in distilled water for different periods of time. Then, the samples were retained in plastic recipients, and the electrical conductivity of the solution was measured. The solubility, dimensional alteration, and radiopacity properties were evaluated according to Specification No. 57 of the American National Standards Institute/American Dental Association (ANSI/ADA. Statistical analyses were carried out using analysis of variance (ANOVA and Tukey's test at a significance level of 5%. When the sample distribution was not normal, a nonparametric ANOVA was performed with a Kruskal-Wallis test (α = 0.05. Results The results showed that white structural Portland cement (PC had the highest solubility, while mineral trioxide aggregate (MTA-based cements, ProRoot MTA (Dentsply-Tulsa Dental and MTA BIO (Ângelus Ind. Prod., had the lowest values. MTA BIO showed the lowest dimensional alteration values and white PC presented the highest values. No differences among the tested materials were observed in the the pH and electrical conductivity analyses. Only the MTA-based cements met the ANSI/ADA recommendations regarding radiopacity, overcoming the three steps of the aluminum step wedge. Conclusions On the basis of these results, we concluded that the values of solubility and dimensional alteration of the materials were in accordance with the ANSI/ADA specifications. PCs did not fulfill the ANSI/ADA requirements regarding radiopacity. No differences were observed among the materials with respect to the pH and electrical conductivity analyses.

  20. [Analysis on property of meridian supramolecules by biological evolution path].

    Science.gov (United States)

    Deng, Kaiwen; Tao, Yeqin; Tang, Wenhan; He, Fuyuan; Liu, Wenlong; Shi, Jilian; Yang, Yantao; Zhou, Yiqun; Chang, Xiaorong

    2017-03-12

    With human placed in the whole nature, by following the biologic evolution path, the property of channel structure for "imprinting template" in meridian and zang-fu was explored with supramolecular chemistry. In the history of biologic evolution, each molecule in "molecule society" gradually developed into various highly-ordered supramolecular bodies based on self-identification, self-assembly, self-organization, self-replicating of"imprinting template", and thereby the original biochemical system was established, and finally evolved into human. In the forming process of supramolecular bodies, the channel structure of"imprinting template" in guest supramolecular bodies would be kept by host supramolecular bodies, and communicate with the outside to exchange materials, energy, information, otherwise life phenomenon could not continue, for which it was the chemical nature of biolo-gical supramolecular bodies for body to develop meridian. Therefore, the human was a gigantic and complicated supramolecules body in biological nature, and possessed the supramolecules "imprinting template" at each stage of evolution, for which the meridians were formed. When meridians converged, acupoints appeared; when acupointsconverged, zang-fu appeared. With the promotion of the blood from heart, according to"imprinting template", the guest supramolecular bodies and host meridian produced qi -analysis, which was the qi -phenomenon of guest in meridian. It presented as zang-fu image of physiology and pathology as well as action regularities of medication and acupuncture tolerance, by which current various meridian viewpoints could be explained and propose the hypothesis of meridian supramolecular bodies. The meridian and its phenomenon was decide by its "imprinting template" of supramolecular bodies and self-reaction regularities, which abided through the living nature. This was the substance for meridian biology.

  1. Characterization of porosity in support of mechanical property analysis

    International Nuclear Information System (INIS)

    Price, R.H.; Martin, R.J. III; Boyd, P.J.

    1992-01-01

    Previous laboratory investigations of tuff have shown that porosity has a dominant, general effect on mechanical properties. As a result, it is very important for the interpretation of mechanical property data that porosity is measured on each sample tested. Porosity alone, however, does not address all of the issues important to mechanical behavior. Variability in size and distribution of pore space produces significantly different mechanical properties. A nondestructive technique for characterizing the internal structure of the sample prior to testing is being developed and the results are being analyzed. The information obtained from this technique can help in both qualitative and quantitative interpretation of test results

  2. Comparative Analysis of Direct and Indirect Property Investment ...

    African Journals Online (AJOL)

    Sultan

    substitute for direct property investment in Abuja, Nigeria. The study .... of stock market investment using Lagos,. Ibadan and ... ordinary shares and saving account for the. Adeogun ... Hence, the need for this study which provides information.

  3. Analysis of anaerobic product properties in fluid and aggressive environments

    OpenAIRE

    Goncharov, A.; Tulinov, A.

    2008-01-01

    The article presents the results of experiments involved in investigation of properties of some domestic and foreign-made anaerobic materials in components and units operating in fluid and aggressive environments. These experiments determined the strength and swell values of anaerobic products in the sea water, fuel and oil, and confirmed their anticorrosion properties. The experiments demonstrated high resistance of anaerobic products to various fluids and aggressive environments, which make...

  4. On the presence of fictitious solar neutrino flux variations in radiochemical experiments

    International Nuclear Information System (INIS)

    Vladimirskii, B.M.; Bruns, A.V.

    2004-01-01

    The currently available data on solar neutrino flux variation in radiochemical experiments and Cherenkov measurements have so far defied a simple interpretation. Some of the results concerning these variations are indicative of their relationship to processes on the solar surface. It may well be that a poorly understood, uncontrollable factor correlating with solar activity indices affects the neutrino flux measurements. This factor is assumed to modulate the detection efficiency on different detectors in different ways. To test this assumption, we have analyzed all available radiochemical measurements obtained with the Brookhaven (1970-1994, 108 runs), GALLEX (1991-1997, 65 runs), and SAGE (1989-2000, 80 runs) detectors for possible instability of the detection efficiency. We consider the heliophysical situation at the final stage of the run, the last 7-27 days, when the products of the neutrino reaction with the target material had already been accumulated. All of the main results obtained previously by other authors were found to be reproduced for chlorine-argon measurements. The neutrino flux anticorrelates with the sunspot numbers only for an odd solar cycle. A similar behavior is observed for the critical frequencies of the E-ionosphere. The neutrino flux probably correlates with the A p magnetic activity index only for an even solar cycle. The predominance of a certain sign of the radial interplanetary magnetic field (IMF) in the last 14 (or 7) days of the run has the strongest effect on the recorded neutrino flux. The effect changes sign when the polarity of the general solar magnetic field is reversed and is most pronounced for the shortest runs (less than 50 days). The dependence of the flux on IMF polarity completely disappears if the corresponding index is taken for the first rather than the last days of the run. The IMF effect on the recorded neutrino flux was also found for short runs in the gallium-germanium experiment, but this effect for a given

  5. Application of radiochemical methods for development of new biological preparation designed for soil bioremediation

    International Nuclear Information System (INIS)

    Kim, A.A.; Djuraeva, G.T.; Djumaniyazova, G.I.; Yadgarov, Kh.T.

    2006-01-01

    Full text: Internationally the bioremediation of agricultural lands contaminated by persistent chloroorganic compounds by means of the microbial methods are used as the most low-cost and the most effective. One of the factors reducing efficacy of microbial degradation, is often the low quantity of microorganisms - destructors in the soil. Therefore, we have designed bioremediation technology of soils, contaminated by organochlorine compounds, with use of the alive microorganisms as active agent. We developed the biological preparation containing 5 aboriginal active strains of bacteria - destructors of persistent chloroorganic compounds and investigated the ability of biological preparation to increase the bioremediation potential of contaminated soils. To carry out the investigation we developed the complex of radiochemical methods with use of tritium labeled PCBs, including the following methods: 1.The method to define the accumulation and degradation of PCBs in soil bacteria in culture allows determination of quantitative characteristics of bacterial strains. 2. The method to define the PCBs degradation by soil bacteria strains in model conditions in the soil allows to estimate the PCB-destructive activity of strains after introducing in soil. 3. A method to define the PCB-destructive activity of own microbiota of contaminated soil. 4. A method to define the effect of stimulation of the PCB-destructive activity of biological preparation and own microbiota of soil with the help of biofertilizers. By using the developed radiochemical methods we have carried out investigation on creation of new biological preparation on the basis of strains of soil bacteria - destructors of PCBs. We also determined the quality and quantity characteristics of HCCH and PCBs-destructive activity of new biological preparation. It is shown that the new biological preparation is capable of accumulation and destruction of the PCBs in culture and in soil at model conditions. Thus, the

  6. III Scientific-technical conference. Problems and outlooks for development of chemical and radiochemical control in atomic energetics (Atomenergoanalytics-2005). Summaries of reports

    International Nuclear Information System (INIS)

    2005-01-01

    Summaries of reports of the III Scientific-technical conference: Problems and outlooks for development of chemical and radiochemical control in atomic energetics (Atomenergoanalytics-2005) are presented. The conference performed 20-22 September, 2005, in Sosnovyj Bor. Problems of methodical, instrumental and metrological supply of chemical, radiochemical and radiometric control at active NPP and NPU, modern concepts of construction of automated systems of chemical and radiometric control in the atomic energetics, directions for the decision of questions in organization and conducting of chemical and radiochemical control of water-chemical regimes of NPP and NPU are discussed [ru

  7. radiochemical study on the medically and technology radionuclides of some lanthanides

    International Nuclear Information System (INIS)

    Aglan, H.A.E.

    2010-01-01

    In this work, trials for the production of the medically and technologically interesting 139 Ce and 142 Pr radionuclides through cyclotron irradiations using protons and alpha particles were studied. The radiochemical separation of no-carrier-added cerium from proton irradiated lanthanum was studied by solvent extraction using DEE, TBP and TPPO, the latter reagent being employed for the first time for separation of radio cerium from bulk of lanthanum. Distribution coefficients of cerium and lanthanum were investigated as a function of equilibrium time and HNO 3 concentration. A mixture of 0.05 M K 2 Cr 2 O 7 and 0.1 M H 2 SO 4 was used as an oxidizing agent to improve the separation efficiency of cerium. A comparative study of the three extractants released that DEE is the best for separation of cerium from bulk of lanthanum oxide. The target was prepared by pressing. The production of 139 Ce of high radionuclidic and chemical purity via irradiation of lanthanum oxide target at MGC-20 cyclotron with protons of energy 14.5 is described. The experimental yield was found to be 153 kBq/μAh .The adsorption behaviour of La/Ce system on Dowex 50W-X8 in different media, namely, nitric acid, acetate buffer and citrate buffer was studied as a function of the concentration of nitric acid and buffer ph. In addition, in cation-exchange column chromatography experiments, three different eluants, namely, citrate buffer of ph 5.5, 0.1 M EDTA and 0.2 M α-HIBA, were employed for separation of Ce (III) from La (III). The optimum conditions for improvement of radiochemical separation of no-carrier-added 139 Ce from proton irradiated lanthanum were applied using the most suitable chelating agent 0.2 M α-HIBA. The purification of 139 Ce from macro amount of La (III) was done using two columns in a sequence. The experimental yield was found to be 200 kBq/μAh.

  8. Radiochemical analysis of homogeneously solidified low level radioactive waste from nuclear power plants

    International Nuclear Information System (INIS)

    Sato, Kaneaki; Ikeuchi, Yoshihiro; Higuchi, Hideo

    1995-01-01

    As mentioned above, we have reliable radioanalytical methods for all kinds of homogeneously solidified wastes. We are now under studying an analytical method for pellets which are made from evaporator concentrates or resin. And we are going to study to establish new analytical method for the rad-waste including metal, cloths and so on in near future. (J.P.N.)

  9. Low-level determination of silicon in biological materials using radiochemical neutron activation analysis

    Czech Academy of Sciences Publication Activity Database

    Kučera, Jan; Zeisler, R.

    2005-01-01

    Roč. 263, č. 3 (2005), s. 811-816 ISSN 0236-5731 R&D Projects: GA ČR GA202/03/0891 Institutional research plan: CEZ:AV0Z10480505 Keywords : gel breast implants * alzhemers-disease * renal-failure Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 0.460, year: 2005

  10. Analysis of radiochemical purity (RCP) of 99Tcm-MAG3 injection

    International Nuclear Information System (INIS)

    Huang Qingquan; Xia Zhenmin

    1992-01-01

    A two-system paper chromatographic method has been established for the determination of RCP of 99 Tc m -MAG 3 injection. R f -values of 99 Tc m -MAG 3 , 99 Tc m O 4 - and H-R- 99 Tc m (hydrolysis reduced 99 Tc m ) are 0.9, 0.8, 0.0 in system I, and 0.0, 0.4, 0.0 in system II respectively. The RCP and percentages of 99 Tc m O 4 - and H-R- 99 Tc m of 99 Tc m -MAG 3 injection have been determined with this method

  11. Nuclear and radiochemical techniques in chemical analysis. Progress report, August 1, 1977--July 31, 1978

    International Nuclear Information System (INIS)

    Finston, H.L.; Williams, E.T.

    1978-07-01

    The study of neutron-absorption cross sections of reactor-produced radionuclides has been completed, and results are reported for 22 Na, 126 I, 139 Ce, 88 Y, 184 Re, 182 Ta, 54 Mn, and 94 Zr. The results for 22 Na indicate the existence of a resonance in the thermal region which could explain the discrepancies in the published values for the thermal cross section. The results of air-sampling experiments are described as is the proton-induced x-ray emission system developed at Brooklyn College. Work on sample preparation and applications of the PIXE technique are given. Progress on a nuclear method to determine fluorine-containing gaseous compounds is reported. Work on solvent extraction with propylene carbonate and experiments involving an acid-base hypothesis are described

  12. Determination of iodine in Asian diets by epithermal and radiochemical neutron activation analysis

    Czech Academy of Sciences Publication Activity Database

    Kučera, Jan; Iyengar, GV.; Řanda, Zdeněk; Parr, RM.

    2004-01-01

    Roč. 259, č. 3 (2004), s. 505-509 ISSN 0236-5731 R&D Projects: GA AV ČR IAA4048301 Institutional research plan: CEZ:AV0Z1048901 Keywords : iodine * Asian diets Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 0.457, year: 2004

  13. Radioimmunological and radiochemical analysis of postradiation injuries of the hypophysis-adrenal cortex system

    International Nuclear Information System (INIS)

    Petrova, G.A.

    1979-01-01

    It has been established in experiments on Wistar male rats that total irradiation with 60 Co in a dose of 600 R brings about disorders in the nature of interaction between the components of the hypophysis-adrenal cortex system. Hypersecretion of the adrenocorticotropic hormone (ACTH) does not correspond to the increased corticosterone content in the blood plasma of the irradiated animals. A slowed down elimination of ACTH- 131 I from the blood plasma of the irradiated animals evidences deficiency of endogenous corticotropine in the peripheral blood. It was recorded that increased glucocorticoid activity of adrenal cortex in irradiation-induced deficiency of ACTH is provided, on one binding capacity of the adrenocortical cells and on the other side, by slowing down the dissositation speed of binded corticotropine

  14. Distribution of platinum in patients treated with cisplatin determined by radiochemical neutron activation analysis

    DEFF Research Database (Denmark)

    Heydorn, K.; Rietz, B.; Krarup-Hansen, A.

    1998-01-01

    Cisplatin is used in a successful treatment of testicular cancer and some related conditions, but several toxic effects have been observed. Knowledge about the distribution of platinum in the human body after treatment with massive doses of cisplatin might provide clues to the origin of side...

  15. Determination of total mercury and methylmercury in human head hair by radiochemical methods of analysis

    International Nuclear Information System (INIS)

    Vasconcellos, M.B.A.; Saiki, M.; Paletti, G.; Pinheiro, R.M.M.; Baruzzi, R.G.; Spindel, R.

    1992-01-01

    Efforts were carried out in order to detect population groups in Brazil that could be at risk with respect to mercury contamination, mainly by ingestion of contaminated fish. Two regions were identified. The first was near Billings Dam which is located in one of the most heavily industrialized parts of the country. It is suspected that the water is polluted by chlor-alkali and other industrial pollutants. People living near this dam frequently consume fish caught around or near the dam. The second region is Xingu Park, located in the Amazonic region where several Indian tribes live and where the gold exploration activities have caused much concern due to the use of mercury in the ore processing. Tons of mercury are thrown in the rivers of the region annually. Both of these groups and a control group were used in this study. It was concluded that the population near Billings Dam had normal levels of mercury. However, the Indians from Xingu Park had very high levels of mercury in their Hair. It was determined that this group deserved further study. 7 refs, 2 tabs

  16. Selenium determination in cereal plants and cultivation soils by radiochemical neutron activation analysis

    Czech Academy of Sciences Publication Activity Database

    Galinha, C.; Freitas, M. C.; Pacheco, A. M. G.; Kameník, Jan; Kučera, Jan; Anawar, H.M.; Coutinho, J.; Macas, B.; Almeida, A. S.

    2012-01-01

    Roč. 294, č. 3 (2012), s. 349-354 ISSN 0236-5731 Grant - others:European Commission(XE) RII3-CT-2003-505925 Program:FP6 Institutional support: RVO:61389005 Keywords : bread wheat * durum wheat * rye * selenium * INAA * RNAA Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 1.467, year: 2012

  17. Group-Contribution based Property Estimation and Uncertainty analysis for Flammability-related Properties

    DEFF Research Database (Denmark)

    Frutiger, Jerome; Marcarie, Camille; Abildskov, Jens

    2016-01-01

    regression and outlier treatment have been applied to achieve high accuracy. Furthermore, linear error propagation based on covariance matrix of estimated parameters was performed. Therefore, every estimated property value of the flammability-related properties is reported together with its corresponding 95......%-confidence interval of the prediction. Compared to existing models the developed ones have a higher accuracy, are simple to apply and provide uncertainty information on the calculated prediction. The average relative error and correlation coefficient are 11.5% and 0.99 for LFL, 15.9% and 0.91 for UFL, 2...

  18. Characterization of porosity in support of mechanical property analysis

    International Nuclear Information System (INIS)

    Price, R.H.; Martin, R.J. III; Boyd, P.J.

    1993-01-01

    The general applicability of laboratory data for engineering purposes is a prime concern for the design and licensing of a potential repository of high level nuclear waste at Yucca Mountain. In order for the results of experiments to be applicable to the repository scale, the data must be scaled to in situ size and conditions. Previous laboratory investigations of tuff have shown that porosity has a dominant, general effect on mechanical properties. As a result, it is very important for the interpretation of mechanical property data that porosity is measured on each sampled test. Porosity alone, however, does not address all of the issues important to mechanical behavior. Variability in size and distribution of pore space produces significantly different mechanical properties. A nondestructive technique for characterizing the internal structure of the sample prior to testing is being developed and the results are being analyzed. The information obtained from this technique can help in both qualitative and quantitative interpretation of test results

  19. Observation and analysis of water inherent optical properties

    Science.gov (United States)

    Sun, Deyong; Li, Yunmei; Le, Chengfeng; Huang, Changchun

    2008-03-01

    Inherent optical property is an important part of water optical properties, and is the foundation of water color analytical model establishment. Through quantity filter technology (QFT) and backscattering meter BB9 (WETlabs Inc), absorption coefficients of CDOM, total suspended minerals and backscattering coefficients of total suspended minerals had been observed in Meiliang Bay of Taihu lake at summer and winter respectively. After analyzing the spectral characteristics of absorption and backscattering coefficients, the differences between two seasons had been illustrated adequately, and the reasons for the phenomena, which are related to the changes of water quality coefficient, had also been explained. So water environment states can be reflected by inherent optical properties. In addition, the relationship models between backscattering coefficients and suspended particle concentrations had been established, which can support coefficients for analytical models.

  20. Penetration Resistance of Armor Ceramics: Dimensional Analysis and Property Correlations

    Science.gov (United States)

    2015-08-01

    which is found to be fairly constant for each impact velocity V0. A plot of P versus V0 at fixed values of h gives an overall estimate of vP/vV0, which...55,58]. An overall strat- egy can be written as ballistic performance ðP=L0Þ 4 1 dimensional parameters ðL ;E Þ 4 2 material properties ðG=E; t=rÞ 4 3...Cronin D, Worswick M, Pageau G, Beth A. Influence of material properties on the ballistic performance of ceramics for personal body armour . Shock

  1. Numerical and experimental analysis on tensile properties of ...

    Indian Academy of Sciences (India)

    A Shadrach Jeyasekaran

    2014-11-17

    Nov 17, 2014 ... 4 Department of Electronics and Communication Engineering, Sri Sai ... the findings that the numerical analysis is found to be higher than experimental analysis. .... using ANSYS software has showed that the differences of.

  2. The material control and accounting system model development in the Radiochemical plant of Siberian Chemical Combine (SChC)

    International Nuclear Information System (INIS)

    Kozyrev, A.S.; Purygin, V.Ya.; Skuratov, V.A.; Lapotkov, A.A.

    1999-01-01

    The nuclear material (NM) control and accounting computerized system is designed to automatically account NM reception, movement and storage at the Radiochemical Plant. The objective of this system development is to provide a constant surveillance over the process material movement, to improve their accountability and administrative work, to upgrade the plant protection against possible NM thefts, stealing and diversion, to rule out any casual errors of operators, to improve the timeliness and significance (reliability) of information about nuclear materials. The NM control and accounting system at the Radiochemical Plant should be based on the computerized network. It must keep track of all the material movements in each Material Balance Areas: material receipt from other plant; material local movement within the plant; material shipment to other plants; generation of required documents about NM movements and its accounting [ru

  3. Application of the spectrometric and radiochemical techniques in analyzing environmental samples from the Bulgarian Black Sea region

    International Nuclear Information System (INIS)

    Veleva, B.S.; Mungov, G.; Galabov, N.; Kolarova, M.; Guenchev, T.

    1999-01-01

    Development of the appropriate methods and techniques for marine and atmospheric radioactivity measurements in the NIMH-BAS during the last 5 years is presented. Approaches for pre-concentration of the radionuclides from the atmosphere and sea water samples followed with reliable radiochemical methods for radionuclides separation and low level counting are discussed. Dissolved radiocesium concentrations measured in a period of time starting in 1993 show some decrease with years and spatial variations probably due to the hydrophysical features of the sampling sides - the lower measured concentrations during 1995 and 1998 correspond to the lower salinity. Application of the radiochemical separation of Plutonium, Thorium, 90 Sr and Americium on the samples from the Bulgarian Black Sea coastal region is reported. (author)

  4. Application of the radiochemical - and the direct gamma ray spectrometry method to the burnup determination of irradiated uranium oxide

    International Nuclear Information System (INIS)

    Cunha, I.I.L.

    1979-01-01

    The burn up of natural U 3 O 8 that occurs by the action of thermal neutrons was determined, using the radioisotopes 144 Ce, 137 Cs, 103 Ru, 106 Ru and 95 Zr as monitors. The determination of the burn up was made using both destructive and non-destructive methods. In the non-destructive method, the technique of direct gamma-ray spectrometry was used and the radioisotopes mentioned were simultaneously counted in a Ge-Li detector. In the radiochemical method the same radioisotopes were isolated one from the other and from all other fission products before counting. The solvent extraction technique was used for the radiochemical separation of uranium, cerium, cesium and ruthenium. To separate zirconium and niobium, adsorption in silica-gel was used. The extraction agent employed to isolate cesium was dipycrilamine and for the separation of the other radioisotopes Di-(2-Ethyl Hexyl) Phosphoric acid (HDEHP) was used. (Author) [pt

  5. Validity limits of fuel rod performance calculations from radiochemical data at operating LWRs

    International Nuclear Information System (INIS)

    Zaenker, H.; Nebel, D.

    1986-01-01

    There are various calculational models for the assessment of the fuel rod performance on the basis of the activities of gaseous and volatile fission products in the reactor coolant. The most important condition for the applicability of the calculational models is that a steady state release of the fission products into the reactor coolant takes place. It is well known that the models are not applicable during or shortly after reactor transients. The fact that 'unsteady states' caused by the fuel defection processes themselves can also occur in rare cases at steady reactor operation has not been taken into account so far. A test of validity is suggested with the aid of which the applicability of the calculational models can be checked in any concrete case, and the misleading of the reactor operators by gross misinterpretation of the radiochemical data can be avoided. The criteria of applicability are the fission product total activity, the slope tan α in the relationship lg (R/sub i//B/sub i/) proportional to lg lambda/sub i/ for the gaseous and volatile fission products, and the activity of the nonvolatile isotope 239 Np. (author)

  6. Placement of the radiochemical processing plant at Oak Ridge National Laboratory into a safe standby condition

    International Nuclear Information System (INIS)

    Holladay, D.W.; Bopp, C.D.; Farmer, A.J.; Johnson, J.K.; Miller, C.H.; Powers, B.A.; Collins, E.D.

    1986-01-01

    Extensive upgrade, cleanup, and decontamination efforts are being conducted for appropriate areas in the Radiochemical Processing Plant (RPP) with the goal of achieving safe standby condition by the end of FY 1989. The ventilation system must maintain containment thus, it is being upgraded via demolition and replacement of marginally adequate ductwork, fans, and control systems. Areas that are being decontaminated and stripped of various services (e.g., piping, ductwork, and process tanks) include hot cells, makeup rooms, and pipe tunnels. Operating equipment that is being decontaminated includes glove boxes and hoods. Replacement of the ventilation system and removal of equipment from pipe tunnels, cells, and makeup rooms are accomplished by contact labor by workers using proper attire, safety rules, and shielding, Removal of contaminated ductwork and piping is conducted with containment enclosures that are strategically located at breakpoints, and methods of separation are chosen to conform with health physics requirements. The methods of cutting contaminated piping and ductwork include portable reciprocating saws, pipe cutters, burning, and plasma torch. Specially designed containment enclosures will be used to prevent the spread of radioactive contamination while maintaining adequate ventilation

  7. Application of radiochemical methods to investigate mercury in water-ecosystems

    International Nuclear Information System (INIS)

    Kraemer, H.J.

    1975-01-01

    Two topics have been picked out of the vast scope of possible questions on mercury ecology in this work: 1) Development for a method of enrichment of mercury from surface water and neutron activation analytical determination of the influence of dissolved Hg compounds on the water/fish part-process taking course in the water-ecosystem with the help of radiochemical tracer methods. The developed enrichment method, adsorbents on aniline sulphur resin basis, was applied to the activation analytical Hg determination in model solutions with a specified content as well as in water of the Rhine, where a Hg content of 1.1 +- 0.2 x 10 -3 ppm was determined. 2) The uptake (and yield) of Hg (NO 3 ) 2 and CH 3 HgCl from fish was traced using radioactive tracers Hg 197 and Hg 203. The measured accumulation and yield kinetics and observed influence due to additions enable the development of model to interpret the interaction between fish and dissolved Hg compounds. (RB) [de

  8. Determination of radiochemical purity of 125I-TOC and 125I-F-PGA

    International Nuclear Information System (INIS)

    Yang Keya; Fan Wo; Zhang Youjiu; Xu Yujie; Zhu Ran; Hu Mingjiang

    2006-01-01

    To explore whether there is accordance among three determination methods of the radiochemical purity of [Tyr 3 ] octreotide (TOC) and folate-penicillin G amidase conjugate (F-PGA), which are both labeled with 125 I by Iodogen method, the RCP of the labelings are determined by high performance liquid chromatography (HPLC), paper chromatography and trichloroacetic acid (TCA) precipitation, in which four different concentrations of proteins are used to investigate the effect of them on the determination of RCP. It is shown that both HPLC and paper chromatography can separate the labelings from free iodine efficiently, though HPLC is the most precise and reliable method to determinate RCP of such labelings. In TCA precipitation, the RCP measured with 0.2%BSA is the lowest, but those with three other concentrations of the BSA are similar (P>0.05). When RCP 0.05), whereas higher than that with HPLC (P 10%, the RCP of 125 I-TOC obtained by TCA precipitation is a bit lower than those by two other methods (P 0.05), and there are no significant differences to determinate the RCP of 125 I-F-PGA (P>0.05). The three methods are correlated each other (r=0.0996-0.999, P<0.001). (authors)

  9. Automation of column-based radiochemical separations. A comparison of fluidic, robotic, and hybrid architectures

    Energy Technology Data Exchange (ETDEWEB)

    Grate, J.W.; O' Hara, M.J.; Farawila, A.F.; Ozanich, R.M.; Owsley, S.L. [Pacific Northwest National Laboratory, Richland, WA (United States)

    2011-07-01

    Two automated systems have been developed to perform column-based radiochemical separation procedures. These new systems are compared with past fluidic column separation architectures, with emphasis on using disposable components so that no sample contacts any surface that any other sample has contacted, and setting up samples and columns in parallel for subsequent automated processing. In the first new approach, a general purpose liquid handling robot has been modified and programmed to perform anion exchange separations using 2 mL bed columns in 6 mL plastic disposable column bodies. In the second new approach, a fluidic system has been developed to deliver clean reagents through disposable manual valves to six disposable columns, with a mechanized fraction collector that positions one of four rows of six vials below the columns. The samples are delivered to each column via a manual 3-port disposable valve from disposable syringes. This second approach, a hybrid of fluidic and mechanized components, is a simpler more efficient approach for performing anion exchange procedures for the recovery and purification of plutonium from samples. The automation architectures described can also be adapted to column-based extraction chromatography separations. (orig.)

  10. 324 Radiochemical engineering cells and high level vault tanks mixed waste compliance status

    International Nuclear Information System (INIS)

    1994-01-01

    The 324 Building in the Hanford 300 Area contains Radiochemical Engineering Cells and High Level Vault tanks (the open-quotes REC/HLVclose quotes) for research and development activities involving radioactive materials. Radioactive mixed waste within this research installation, found primarily in B-Cell and three of the high level vault tanks, is subject to RCRA/DWR (open-quotes RCRAclose quotes) regulations for storage. This white paper provides a baseline RCRA compliance summary of MW management in the REC/HLV, based on best available knowledge. The REC/HLV compliance project, of which this paper is a part, is intended to achieve the highest degree of compliance practicable given the special technical difficulties of managing high activity radioactive materials, and to assure protection of human health and safety and the environment. The REC/HLV was constructed in 1965 to strict standards for the safe management of highly radioactive materials. Mixed waste in the REC/HLV consists of discarded tools and equipment, dried feed stock from nuclear waste melting experiments, contaminated particulate matter, and liquid feed stock from various experimental programs in the vault tanks. B-Cell contains most of these materials. Total radiological inventory in B-Cell is estimated at 3 MCi, about half of which is potentially open-quotes dispersibleclose quotes, that is, it is in small pieces or mobile particles. Most of the mixed waste currently in the REC/HLV was generated or introduced before mixed wastes were subjected to RCRA in 1987

  11. Placement of the radiochemical processing plant at Oak Ridge National Laboratory into a safe standby condition

    International Nuclear Information System (INIS)

    Holladay, D.W.; Bopp, C.D.; Farmer, A.J.; Johnson, J.K.; Miller, C.H.; Powers, B.A.; Collins, E.D.

    1986-01-01

    Extensive upgrade, cleanup, and decontamination efforts are being conducted for appropriate areas in the Radiochemical Processing Plant (RPP) with the goal of achieving ''safe standby'' condition by the end of FY 1989. The ventilation system must maintain containment; thus, it is being upgraded via demolition and replacement of marginally adequate ductwork, fans, and control systems. Areas that are being decontaminated and stripped of various services (e.g., piping, ductwork, and process tanks) include hot cells, makeup rooms, and pipe tunnels. Operating equipment that is being decontaminated includes glove boxes and hoods. Replacement of the ventilation system and removal of equipment from pipe tunnels, cells, and makeup rooms are accomplished by contact labor by workers using proper attire, safety rules, and shielding. Removal of contaminated ductwork and piping is conducted with containment enclosures that are strategically located at breakpoints, and methods of separation are chosen to conform with health physics requirements. The methods of cutting contaminated piping and ductwork include portable reciprocating saws, pipe cutters, burning, and plasma torch. Specially designed containment enclosures will be used to prevent the spread of radioactive contamination while maintaining adequate ventilation. 6 figs

  12. The role of high performance liquid chromatography in radiochemical/radiopharmaceutical synthesis and quality assurance

    International Nuclear Information System (INIS)

    Boothe, T.E.; Emran, A.M.

    1991-01-01

    This article discusses some specifications for HPLC methodology and reviews some recent applications of HPLC with emphasis on quality assurance (QA). Developments in the HPLC field will continue to find their way into practical everyday use in the radiopharmaceutical industry. This is illustrated in the area of column technology by the use of chiral columns for the determination of enantiomeric purity of receptor-based radiopharmaceuticals and by the use of internal surface reversed-phase (ISRP) columns for determination of radiolabelled metabolites in whole blood. An increased use of optimization and chemometric methods should provide better resolution in preparative and analytical procedures. Computer techniques applied to data manipulation could aid in the elimination of human bias in determining radiochemical purities and specific activities. If HPLC is to be adopted as a routine tool for the QC of radiopharmaceuticals, particularly those prepared in-house, more effort should be made to guarantee that proper standards are in place to assure compliance, especially as responsibilities are passed from the more highly trained senior level personnel to the technologist/technician level

  13. 99mTc-ECD: Comparison of radiochemical purity evaluation techniques

    International Nuclear Information System (INIS)

    Dumont, A.; De Beco, V.; Ait Ben Ali, S.; Goudou-Sinha, C.; Izembart, M.; Jourdain, J.R.; Lemercier, V.; Linsker, S.; Lours, S.; Moati, F.; Pajard, D.; Piketty, M.L.; Rizzo, N.; Schlageter, M.H.; Moretti, J.L.

    1997-01-01

    The aim of this study was to validate a testing method for the radiochemical purity (RCP) of the preparations of 99m Tc - ECD that is to be reproducible and easy to realize in services of Nuclear Medicine. After a review of literature, four thin-layer chromatography techniques allowing to evidence the TcO 4 - were evaluated: no.1 - Papier Whatman 31ET / ethyl acetate; no.2 - Papier Whatman 3MM chr / ethyl acetate; no.3 - ITLC Silica gel / ethyl acetate; no.4 - Baker Flex silica gel aluminium oxide IB-F / ethyl acetate (the method proposed by the laboratory). The technique no.1 has presented a bad reproducibility, as well as percentages of RCP very different from those obtained by the other techniques. The techniques no.2 and no.3, although rapid, are characterized by lower reproducibilities in comparison with technique no.4, with, some times, peaks of undetermined nature on the radio-chromatograms no.3. So, in spite of a slower migration (10 min.) the technique no.4 has been selected from the group as the most reliable technique. For this technique, the comparison between the two modes of reading the chromatography (by means of a radio-chromatograph or by measuring the activity of the two halves of the plate by an activity-meter), has shown no significant difference in RCP. Consequently, this method (Baker Flex / ethyl acetate) may by adapted in any service of nuclear medicine, no matter of its equipment

  14. Testing the radiochemical purity of radiopharmaceuticals: application to 99mTc-HMPAO

    International Nuclear Information System (INIS)

    Ait Ben Ali, S.; Darsin, D.; Rizzo, N.; Lours, S.; De Beco, V.; Dumont, A.; Goudou-Sinha, C.; Izembart, M.; Jourdain, J.R.; Lemercier, V.; Linsker, S.; Moati, F.; Piketty, M.L.; Schlageter, M.H.; Moretti, J.L.

    1997-01-01

    The low stability of 99m Tc-HMPAO imposes to carry out the quality testing within the 15 minutes following the preparation. This study has the aim of comparing different methods of radiochemical purity determination (RP) of this radiopharmaceutical in order to validate a fast, reproducible, feasible technique, capable of separating the primary lipophilic 99m Tc-HMPAO (I) of impurities: hydrophilic secondary complex (II), TcO 4 - , reduced and halyards Tc. The reference technique associating two thin-layer chromatographies (TLC), 'C1' and 'C2', has been compared with a TLC 'W' technique and with liquid-liquid extraction 'E' technique: C1 - stationary phase, ITLC Silica gel/mobile phase, Butanone-2; C2 - stationary phase, ITLC Silica gel/mobile phase, 0.9% NaCl; W - stationary phase, Papier Whatman n o 1/mobile phase, Ether; E - extraction with ethyls acetate /0.9% NaCl (1/1 v/v). The 'C1' chromatography allows isolating the reduced Tc and the complex II, the 'C2' chromatography does the same with TcO 4 - but it requires too long techniques (20 min.). The 'W' and 'E' techniques are rapid, reproducible and allow to separate the complex I from the other impurities without discrimination. However, as their results depend upon the deposited quantity of sampling, an optimization and standardization of the techniques are necessary. A forth technique by chromatography on Sep-Pak column is to be evaluated

  15. Radiochemical determination of Beryllium-7 in a fission-product mixture containing many inorganic salts

    International Nuclear Information System (INIS)

    Prigent, Y.; Van Kote, F.

    1969-01-01

    A radiochemical method is described for analysing beryllium-7 in a mixture of fission products containing many inorganic salts. By studying the influence of various parameters it has been possible to speed up the decontamination on an anionic resin using an HCl isopropanol mixture, as proposed by KORKISCH- and al. Be(OH) 2 is first precipitated in the presence of E.D.T.A.; the main contaminants are then fixed on Dowex 1 x 10 in 12 M HCl and on Dowex 1 x 8 in a 3 M HCl (20 per cent)-isopropanol (80 per cent) (vol/vol) mixture. The Be, which is not fixed, is precipitated by NH 4 H 2 PO 4 in the presence of E.D.T.A., ignited as Be 2 P 2 O 7 , filtered, weighed, and analyzed by gamma spectrometry. The method makes it possible to dose 4 samples in 16 hours with a chemical yield of 80 per cent, using a 4 day-old fission product solution. The overall decontamination factor, exceeds 10 8 . (authors) [fr

  16. Radiochemical tools at the experimental lakes area (ELA) in Ontario, Canada

    International Nuclear Information System (INIS)

    Pfitzner, J.; Brunskill, G.

    1998-01-01

    Full text: For over 20 years, Canadian research scientists have used radiochemical tracers added to remote and pristine lakes to study physical, chemical, and biological processes that could not be easily quantified by other methods. Lakes have also been manipulated by experimentally altering the hydrological cycle, chemical composition, and species of fish in selected lakes, and using companion lakes as controls. Varying additions of organic carbon, N, and P have been done, and the exchange rate of carbon dioxide between the atmosphere and water was estimated using radon evasion rates from radium spikes in the lake water. Multinuclide spikes were done to follow the path of mine waste elements through the food chain and sediment accumulation. Lakes were experimentally acidified with HCl and HNO 3 and H 2 SO 4 to simulate acid rain, and to study natural buffering capacity of the hydrological cycle. Some of this research has been used to legislate pollution control in the St. Laurence Great Lakes and across Canada and USA. ELA research team spirit has survived several forest fires, bear attacks on the kitchen, massive cut-backs in funding and reduction in staff of Fisheries and Ocean Canada

  17. LWR spent-fuel radiochemical measurements and comparison with ORIGEN2 predictions

    International Nuclear Information System (INIS)

    Blahnik, D.E.; Jenquin, U.P.; Guenther, R.J.

    1988-01-01

    The Materials Characterization Center (MCC) at Pacific Northwest Laboratory is responsible for providing characterized spent fuel, designated approved testing material (ATMs) for subsequent use in the investigation of nuclear waste disposal forms by the US Department of Energy geologic repository project. The ATMs are selected to assure that test material is available that has a representative range of characteristics important to spent-fuel behavior in a geologic repository. Burnup and fission gas release were the primary criteria for selecting the ATMs. The five spent-fuel ATMs (ATM-101, -103, -104, -105, and -106) currently being characterized by the MCC have rod average burnups ranging from 20 to 43 MWd/kg M, fission gas releases ranging from 0.2 to 11.2%, and are from both boiling water reactors and pressurized water reactors. Radiochemical analyses of the fuel included measurements of 148 Nd (for fuel burnup), the isotopes of uranium and plutonium, and nuclides of importance to repository performance. Cladding samples were analyzed for 14 C. The measured values of selected nuclides were compared with values obtained from calculations with the ORIGEN2 code that was used to predict isotopic quantities for all of the ATMS. Ratios of the ORIGEN2 calculated values to the measured values for ATM-103 and ATM-106 fuel are given

  18. Analysis of Intellectual Property Protection Issues in Offshore Outsourcing

    Science.gov (United States)

    Singh, Satinder Pal

    2013-01-01

    Offshore outsourcing is a business strategy that involves contracting with a partner who can take over certain aspects of a company's business, such as information technology (IT) functions, in the interests of efficiency and cost savings. The purpose of this study was to analyze the intellectual property protection issues to achieve a better…

  19. Analysis of acidic properties of distribution transformer oil insulation ...

    African Journals Online (AJOL)

    This paper examined the acidic properties of distribution transformer oil insulation in service at Jericho distribution network Ibadan, Nigeria. Five oil samples each from six distribution transformers (DT1, DT2, DT3, DT4 and DT5) making a total of thirty samples were taken from different installed distribution transformers all ...

  20. Biochemical properties and microbial analysis of honey from North ...

    African Journals Online (AJOL)

    In the present study, physicochemical properties (pH, ash, commercial glucose, starch, reducing sugars and moisture) and microbial (yeast and enterobacterial) contaminations of 263 honey samples from North-western regions of Iran were evaluated in a 2 year period in different seasons of 2010 and 2011. Levels of ...

  1. Crystal and Microstructure Analysis of Pozzolanic Properties of ...

    African Journals Online (AJOL)

    ADOWIE PERE

    and analyze the quality and quantity of composition and hydration behavior of the ... advantages in the properties of such concrete in term of mineral composition .... The value of the temperature constant (K) was derived from a table using the ...

  2. Theoretical analysis of static properties of mixed ionic crystal ...

    Indian Academy of Sciences (India)

    In the present paper, we have investigated the static properties of the mixed ionic crystal NH4Cl1−Br using three-body potential model (TBPM) by the application of Vegard's law. The results for the mixed crystal counterparts are also in fair agreement with the pseudo-experimental data generated from the application of ...

  3. Elementary computation of radiation doses and shieldings for radiochemical laboratories; Calculo Elemental de dosis y blindajes para laboratorios radioquimicos

    Energy Technology Data Exchange (ETDEWEB)

    Jimeno de Osso, F

    1971-07-01

    Simple procedures for the calculation of radiation exposition, half thickness, shield thickness, etc. are described and equations and graphs are included for those gamma-emitting radionuclides, that are more often used in radiochemical laboratories. Application is made of these procedures to three radionuclides, bromine-82, sodium-24 and cobalt-60 which cover a rather wl.de energy range; theoretical results are compared with those obtained from experimental measurements. (Author) 23 refs.

  4. Stationary and through-flow radiochemical detectors in cooperation with high performance liquid chromatography: Application in biochemistry

    International Nuclear Information System (INIS)

    Kehr, J.

    1986-01-01

    A review article is presented containing some original experimental data and discussing the usability of radiochemical detection of labelled compounds using high performance liquid chromatography. The stationary and through-flow types of detection are compared with respect to efficiency, chromatographic zone resolution, usability in biochemical research, and also to the current trends of development of liquid chromatography. (author). 3 figs., 1 tab., 19 refs

  5. Analysis of terahertz dielectric properties of pork tissue

    Science.gov (United States)

    Huang, Yuqing; Xie, Qiaoling; Sun, Ping

    2017-10-01

    Seeing that about 70% component of fresh biological tissues is water, many scientists try to use water models to describe the dielectric properties of biological tissues. The classical water dielectric models are Debye model, Double Debye model and Cole-Cole model. This work aims to determine a suitable model by comparing three models above with experimental data. These models are applied to fresh pork tissue. By means of least square method, the parameters of different models are fitted with the experimental data. Comparing different models on both dielectric function, the Cole-Cole model is verified the best to describe the experiments of pork tissue. The correction factor α of the Cole-Cole model is an important modification for biological tissues. So Cole-Cole model is supposed to be a priority selection to describe the dielectric properties for biological tissues in the terahertz range.

  6. Elaboration of invariant safety properties from fault-tree analysis

    OpenAIRE

    Henry , Sébastien; Faure , Jean-Marc

    2003-01-01

    International audience; Formal verification of PLC programs using model-checking requires to elaborate previously temporal logic formulae which state in a formal way the properties that must be checked. Unfortunately temporal logic is a formalism totally unknown by automation engineers. This explains why PLC programs developers willing to verify the behavior of their programs are unable to use the existing modelchecking tools. Temporal logic formulae elaboration is a too difficult task. In or...

  7. Systematic analysis of scaling properties in deep inelastic scattering

    International Nuclear Information System (INIS)

    Beuf, Guillaume; Peschanski, Robi; Royon, Christophe; Salek, David

    2008-01-01

    Using the 'quality factor' method, we analyze the scaling properties of deep inelastic processes at the accelerator HERA and fixed target experiments for x≤10 -2 . We look for scaling formulas of the form σ γ * p (τ), where τ(L=logQ 2 ,Y) is a scaling variable suggested by the asymptotic properties of QCD evolution equations with rapidity Y. We consider four cases: 'fixed coupling', corresponding to the original geometric scaling proposal and motivated by the asymptotic properties of the Balitsky-Kovchegov equation with fixed QCD coupling constant; two versions, 'running coupling I, II,' of the scaling suggested by the Balitsky-Kovchegov equation with running coupling; and 'diffusive scaling' suggested by the QCD evolution equation with Pomeron loops. The quality factors, quantifying the phenomenological validity of the candidate scaling variables, are fitted on the total and deeply virtual Compton scattering cross-section data from HERA and predictions are made for the elastic vector meson and for the diffractive cross sections at fixed small x P or β. The first three scaling formulas have comparably good quality factors while the fourth one is disfavored. Adjusting initial conditions gives a significant improvement of the running coupling II scaling.

  8. A Flow-Sensitive Analysis of Privacy Properties

    DEFF Research Database (Denmark)

    Nielson, Hanne Riis; Nielson, Flemming

    2007-01-01

    that information I send to some service never is leaked to another service? - unless I give my permission? We shall develop a static program analysis for the pi- calculus and show how it can be used to give privacy guarantees like the ones requested above. The analysis records the explicit information flow...

  9. Lipid technology: Property prediction and process design/analysis in the edible oil and biodiesel industries

    DEFF Research Database (Denmark)

    Díaz Tovar, Carlos Axel; Gani, Rafiqul; Sarup, Bent

    2011-01-01

    acid methyl esters); their representation and classification in terms of molecular structures; the collection of available experimental data of their pure component physical properties; the adoption of appropriate property-process models for the design and analysis of production processes through......In this work some of the property related issues in lipid processing technology employed in edible oil and biodiesel production are highlighted. This includes the identification of the most representative chemical species (acylglycerides, free fatty acids, tocopherols, sterols, carotenes, and fatty...

  10. Effect of Uncertainties in Physical Property Estimates on Process Design - Sensitivity Analysis

    DEFF Research Database (Denmark)

    Hukkerikar, Amol; Jones, Mark Nicholas; Sin, Gürkan

    for performing sensitivity of process design subject to uncertainties in the property estimates. To this end, first uncertainty analysis of the property models of pure components and their mixtures was performed in order to obtain the uncertainties in the estimated property values. As a next step, sensitivity......Chemical process design calculations require accurate and reliable physical and thermodynamic property data and property models of pure components and their mixtures in order to obtain reliable design parameters which help to achieve desired specifications. The uncertainties in the property values...... can arise from the experiments itself or from the property models employed. It is important to consider the effect of these uncertainties on the process design in order to assess the quality and reliability of the final design. The main objective of this work is to develop a systematic methodology...

  11. Is activation analysis still active?

    International Nuclear Information System (INIS)

    Chai Zhifang

    2001-01-01

    This paper reviews some aspects of neutron activation analysis (NAA), covering instrumental neutron activation analysis (INAA), k 0 method, prompt gamma-ray neutron activation analysis (PGNAA), radiochemical neutron activation analysis (RNAA) and molecular activation analysis (MAA). The comparison of neutron activation analysis with other analytical techniques are also made. (author)

  12. Analysis of Microbiological and Physiochemical Properties of Top ...

    African Journals Online (AJOL)

    ADOWIE PERE

    2Medical Laboratory, Lonia Clinic and Maternity Ovwian Delta State ... ABSTRACT: The effect of disposing municipal waste on soil was evaluated by analyzing the microbiological and enzyme ..... Analysis Part 2: Chemical and Microbiological.

  13. Literature search, review, and compilation of data for chemical and radiochemical sensors: Task 1 report

    International Nuclear Information System (INIS)

    1993-01-01

    During the next several decades, the US Department of Energy is expected to spend tens of billions of dollars in the characterization, cleanup, and monitoring of DOE's current and former installations that have various degrees of soil and groundwater contamination made up of both hazardous and mixed wastes. Each of these phases will require site surveys to determine type and quantity of hazardous and mixed wastes. It is generally recognized that these required survey and monitoring efforts cannot be performed using traditional chemistry methods based on laboratory evaluation of samples from the field. For that reason, a tremendous push during the past decade or so has been made on research and development of sensors. This report contains the results of an extensive literature search on sensors that are used or have applicability in environmental and waste management. While restricting the search to a relatively small part of the total chemistry spectrum, a sizable body of reference material is included. Results are presented in tabular form for general references obtained from data base searches, as narrative reviews of relevant chapters from proceedings, as book reviews, and as reviews of journal articles with particular relevance to the review. Four broad sensor types are covered: electrochemical processes, piezoelectric devices, fiber optics, and radiochemical processes. The topics of surface chemistry processes and biosensors are not treated separately because they often are an adjunct to one of the four sensors listed. About 1,000 tabular entries are listed, including selected journal articles, reviews of conference/meeting proceedings, and books. Literature to about mid-1992 is covered

  14. Radiochemically-Supported Microbial Communities: A Potential Mechanism for Biocolloid Production of Importance to Actinide Transport

    Energy Technology Data Exchange (ETDEWEB)

    Moser, Duane P. [Desert Research Inst., Nevada University, Reno, NV (United States); Hamilton-Brehm, Scott D. [Desert Research Inst., Nevada University, Reno, NV (United States); Fisher, Jenny C. [Desert Research Inst., Nevada University, Reno, NV (United States); Bruckner, James C. [Desert Research Inst., Nevada University, Reno, NV (United States); Kruger, Brittany [Desert Research Inst., Nevada University, Reno, NV (United States); Sackett, Joshua [Desert Research Inst., Nevada University, Reno, NV (United States); Russell, Charles E. [Desert Research Inst., Nevada University, Reno, NV (United States); Onstott, Tullis C. [Princeton Univ., NJ (United States); Czerwinski, Ken [Univ. of Nevada, Las Vegas, NV (United States); Zavarin, Mavrik [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Campbell, James H. [Northwest Missouri State Univ., Maryville, MO (United States)

    2014-06-01

    Due to the legacy of Cold War nuclear weapons testing, the Nevada National Security Site (NNSS, formerly known as the Nevada Test Site (NTS)) contains millions of Curies of radioactive contamination. Presented here is a summary of the results of the first comprehensive study of subsurface microbial communities of radioactive and nonradioactive aquifers at this site. To achieve the objectives of this project, cooperative actions between the Desert Research Institute (DRI), the Nevada Field Office of the National Nuclear Security Administration (NNSA), the Underground Test Area Activity (UGTA), and contractors such as Navarro-Interra (NI), were required. Ultimately, fluids from 17 boreholes and two water-filled tunnels were sampled (sometimes on multiple occasions and from multiple depths) from the NNSS, the adjacent Nevada Test and Training Range (NTTR), and a reference hole in the Amargosa Valley near Death Valley. The sites sampled ranged from highly-radioactive nuclear device test cavities to uncontaminated perched and regional aquifers. Specific areas sampled included recharge, intermediate, and discharge zones of a 100,000-km2 internally-draining province, known as the Death Valley Regional Flow System (DVRFS), which encompasses the entirety of the NNSS/NTTR and surrounding areas. Specific geological features sampled included: West Pahute and Ranier Mesas (recharge zone), Yucca and Frenchman Flats (transitional zone), and the Western edge of the Amargosa Valley near Death Valley (discharge zone). The original overarching question underlying the proposal supporting this work was stated as: Can radiochemically-produced substrates support indigenous microbial communities and subsequently stimulate biocolloid formation that can affect radionuclides in NNSS subsurface nuclear test/detonation sites? Radioactive and non-radioactive groundwater samples were thus characterized for physical parameters, aqueous geochemistry, and microbial communities using both DNA- and

  15. Literature search, review, and compilation of data for chemical and radiochemical sensors: Task 1 report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-01-01

    During the next several decades, the US Department of Energy is expected to spend tens of billions of dollars in the characterization, cleanup, and monitoring of DOE`s current and former installations that have various degrees of soil and groundwater contamination made up of both hazardous and mixed wastes. Each of these phases will require site surveys to determine type and quantity of hazardous and mixed wastes. It is generally recognized that these required survey and monitoring efforts cannot be performed using traditional chemistry methods based on laboratory evaluation of samples from the field. For that reason, a tremendous push during the past decade or so has been made on research and development of sensors. This report contains the results of an extensive literature search on sensors that are used or have applicability in environmental and waste management. While restricting the search to a relatively small part of the total chemistry spectrum, a sizable body of reference material is included. Results are presented in tabular form for general references obtained from data base searches, as narrative reviews of relevant chapters from proceedings, as book reviews, and as reviews of journal articles with particular relevance to the review. Four broad sensor types are covered: electrochemical processes, piezoelectric devices, fiber optics, and radiochemical processes. The topics of surface chemistry processes and biosensors are not treated separately because they often are an adjunct to one of the four sensors listed. About 1,000 tabular entries are listed, including selected journal articles, reviews of conference/meeting proceedings, and books. Literature to about mid-1992 is covered.

  16. Analysis of Mechanical Properties of Fabrics of Different Raw Material

    Directory of Open Access Journals (Sweden)

    Aušra ADOMAITIENĖ

    2011-07-01

    Full Text Available The study analyzes dependence of mechanical properties (breaking force, elongation at break, static friction force and static friction coefficient on integrated fabric structure factor j and raw material density r, among the fabrics of different raw material (cotton, wool, polypropylene, polyester and polyacrylnitrile and woven in different conditions. The received results demonstrate that sometimes strong dependences exist (wool, polypropylene and polyacrylnitrile, whereas in some cases (cotton and polyester there is no correlation. It was also discovered that the breaking force and elongation at break in the direction of weft increase, when fabric structure becomes more rigid. In the meantime variations of the curves in the direction of warp are insignificant. Regarding static friction force and static friction coefficient (found in two cases, when fabrics were rubbing against leather and materials, it was discovered that consistency of the curves is irregular, i. e. they either increase or decrease, when integrated fabric structure factor j growth. It was also identified that some dependences are not strong and relationship between explored and analyzed factors does not exist. Variation of all these mechanical properties with respect to material density r enables to conclude that increase of material density r results in poor dependences or they are whatsoever non-existent.http://dx.doi.org/10.5755/j01.ms.17.2.487

  17. Analysis of BJ493 diesel engine lubrication system properties

    Science.gov (United States)

    Liu, F.

    2017-12-01

    The BJ493ZLQ4A diesel engine design is based on the primary model of BJ493ZLQ3, of which exhaust level is upgraded to the National GB5 standard due to the improved design of combustion and injection systems. Given the above changes in the diesel lubrication system, its improved properties are analyzed in this paper. According to the structures, technical parameters and indices of the lubrication system, the lubrication system model of BJ493ZLQ4A diesel engine was constructed using the Flowmaster flow simulation software. The properties of the diesel engine lubrication system, such as the oil flow rate and pressure at different rotational speeds were analyzed for the schemes involving large- and small-scale oil filters. The calculated values of the main oil channel pressure are in good agreement with the experimental results, which verifies the proposed model feasibility. The calculation results show that the main oil channel pressure and maximum oil flow rate values for the large-scale oil filter scheme satisfy the design requirements, while the small-scale scheme yields too low main oil channel’s pressure and too high. Therefore, application of small-scale oil filters is hazardous, and the large-scale scheme is recommended.

  18. Optical properties of Amorphous Semiconductors Part- II: Theory and analysis of optical properties

    International Nuclear Information System (INIS)

    Hogarth, C. A.

    1997-01-01

    The atomic and band structural properties of solids have been studied. Reflectance is concerned in spectroscopic measurement of transmission and absorption, since the incident light intensity must be corrected for the loss of light by reflection and which does not penetrate beyond the surface of the material studied.The procedure for estimating E opt and n from the absorption edge of an amorphous semiconductor has been discussed. In high refractive index glasses there is a general correlation between n and the density of the glasses and in designing a particular glass for an optical purpose this can provide a useful guide to composition. The Gladstone-Dale refractivity and the Newton-Drude refractivity have been calculated for different value of b and these relations have been tested for telluride semiconducting glasses and give reasonable agreement in estimations of n directly from the density ρ. 33 refs., 10 figs

  19. Mechanics of advanced materials analysis of properties and performance

    CERN Document Server

    Matveenko, Valery

    2015-01-01

    The last decades have seen a large extension of types of materials employed in various applications. In many cases these materials demonstrate mechanical properties and performance that vary significantly from those of their traditional counterparts. Such uniqueness is sought – or even specially manufactured – to meet increased requirements on modern components and structures related to their specific use. As a result, mechanical behaviors of these materials under different loading and environmental conditions are outside the boundaries of traditional mechanics of materials, presupposing development of new characterization techniques, theoretical descriptions and numerical tools. The book presents interesting examples of recent developments in this area. Among the studied materials are bulk metallic glasses, metamaterials, special composites, piezoelectric smart structures, nonwovens, etc.

  20. Business, market and intellectual property analysis of polymer solar cells

    DEFF Research Database (Denmark)

    Damgaard Nielsen, Torben; Cruickshank, C.; Foged, S.

    2010-01-01

    and manufacturing cost leaves little room for competition on the thin film photovoltaic market. However, polymer solar cells do enable the competitive manufacture of low cost niche products and is viewed as financially viable in its currently available form in a large volume approximation. Finally, it is found......The business potential of polymer solar cells is reviewed and the market opportunities analyzed on the basis of the currently reported and projected performance and manufacturing cost of polymer solar cells. Possible new market areas are identified and described. An overview of the present patent...... and intellectual property situation is also given and a patent map of polymer solar cells is drawn in a European context. It is found that the business potential of polymer solar cells is large when taking the projections for future performance into account while the currently available performance...