A-State-of-the-Art Report on Application of Radiation Technology to Environmental Pollution Control

Energy Technology Data Exchange (ETDEWEB)

Lee, Jae Kwang; Lee, Myun Joo

2004-06-15

Radiation technology has been rapidly developed for decades and its applicability also enlarged to many fields such as environmental protection, medical care, manufacturing industry, agriculture, and bio technology. In this report, we focused on the present situation of the development of radiation facilities and state-of-the-art on application of radiation to environmental pollution control including purification of flue gas, waste water treatment, and recycling of biological waste. We especially discussed the radiation technology for environmental pollution control and described the capability of its application to the industrial plants in Korea.

Applications of ionizing radiations

International Nuclear Information System (INIS)

2014-01-01

Developments in standard applications and brand new nuclear technologies, with high impact on the future of the agriculture, medicine, industry and the environmental preservation. The Radiation Technology Center (CTR) mission is to apply the radiation and radioisotope technologies in Industry, Health, Agriculture, and Environmental Protection, expanding the scientific knowledge, improving human power resources, transferring technology, generating products and offering services for the Brazilian society. The CTR main R and D activities are in consonance with the IPEN Director Plan (2011-2013) and the Applications of Ionizing Radiation Program, with four subprograms: Irradiation of Food and Agricultural Products; Radiation and Radioisotopes Applications in Industry and Environment; Radioactive Sources and Radiation Applications in Human Health; and Radioactive Facilities and Equipment for the Applications of Nuclear Techniques

Applications of ionizing radiations

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-07-01

Developments in standard applications and brand new nuclear technologies, with high impact on the future of the agriculture, medicine, industry and the environmental preservation. The Radiation Technology Center (CTR) mission is to apply the radiation and radioisotope technologies in Industry, Health, Agriculture, and Environmental Protection, expanding the scientific knowledge, improving human power resources, transferring technology, generating products and offering services for the Brazilian society. The CTR main R and D activities are in consonance with the IPEN Director Plan (2011-2013) and the Applications of Ionizing Radiation Program, with four subprograms: Irradiation of Food and Agricultural Products; Radiation and Radioisotopes Applications in Industry and Environment; Radioactive Sources and Radiation Applications in Human Health; and Radioactive Facilities and Equipment for the Applications of Nuclear Techniques.

Industrial Applications of radioisotopes and radiation technology and Agency's role

International Nuclear Information System (INIS)

Ramamoorthy, N.; Haji-Saeid, M.

2004-01-01

Applications of radioisotopes and radiation technology are contributing significantly in many areas of science and technology, industry and environment, towards sustainable development, improving the quality of life and cleaner and safer national industries. There are three major classes impacting industrial scale operations, namely, (a) radiation processing/treatment, (b) radiotracer and sealed source techniques to monitor industrial processes/columns/vessels and (c) industrial gamma radiography and tomography. Radiation processing applying gamma sources and electron accelerators for material treatment/modification is an established technology. There are over 160 gamma industrial irradiators and 1300 industrial electron accelerators in operation worldwide. Development of new materials, especially for health care and environment protection, and advanced products (for electronics, solar energy systems, biotechnology etc) are the main objectives of R and D activity in radiation processing technology. The International Atomic Energy Agency (IAEA, Agency) is involved in supporting both the development and transfer of radiation technology. Thanks to Agency's efforts, advanced radiation processing centres have been established in many Member States (MS), e.g. Malaysia, Egypt, Iran, Poland, Brazil, Hungary. Hydrogel dressing for wounds, radiation vulcanised latex, degraded natural polymer are examples of useful product outcomes. Demonstration of effective treatment of flue gas in pilot plant as well as industrial scale and industrial wastewater in pilot plant scale has shown promise for tackling industrial emissions/effluents using electron beam machines. Industrial radiotracer and gamma sealed source techniques are largely used for analyzing industrial process systems. Initially used as trouble-shooting measures, they play a vital role in process parameter optimization, improved productivity, on-line monitoring and could lead to even pre-commissioning benchmarking. Gamma

Industrial Applications of radioisotopes and radiation technology and Agency's role

International Nuclear Information System (INIS)

Ramamoorthy, N.; Haji-Saeid, M.

2004-01-01

Full text: Applications of radioisotopes and radiation technology are contributing significantly in many areas of science and technology, industry and environment, towards sustainable development, improving the quality of life and cleaner and safer national industries. There are three major classes impacting industrial scale operations, namely, (a) radiation processing/treatment, (b) radiotracer and sealed source techniques to monitor industrial processes/columns/vessels and (c) industrial gamma radiography and tomography. Radiation processing applying gamma sources and electron accelerators for material treatment/modification is an established technology. There are over 160 gamma industrial irradiators and 1300 industrial electron accelerators in operation worldwide. Development of new materials, especially for health care and environment protection, and advanced products (for electronics, solar energy systems, biotechnology etc) are the main objectives of R and D activity in radiation processing technology. The International Atomic Energy Agency (IAEA, Agency) is involved in supporting both the development and transfer of radiation technology. Thanks to Agency's efforts, advanced radiation processing centres have been established in many Member States (MS), e.g. Malaysia, Egypt, Iran, Poland, Brazil, Hungary. Hydrogel dressing for wounds, radiation vulcanised latex, degraded natural polymer are examples of useful product outcomes. Demonstration of effective treatment of flue gas in pilot plant as well as industrial scale and industrial wastewater in pilot plant scale has shown promise for tackling industrial emissions/effluents using electron beam machines. Industrial radiotracer and gamma sealed source techniques are largely used for analyzing industrial process systems. Initially used as trouble-shooting measures, they play a vital role in process parameter optimization, improved productivity, on-line monitoring and could lead to even pre

Radiation technology in Vietnam

Energy Technology Data Exchange (ETDEWEB)

Vo Van Thuan [Institute for Nuclear Science and Technique, VAEC, Hanoi (Viet Nam)

2001-03-01

Most of researches and developments in the field of radiation technology that have completed in a decade before 1995 were concentrated to sterilization and food irradiation. A series of medical devices and products were the main commodities for research and application trials. Also, many kind of food have attracted the scientists and technologists to investigate the application and commercialization of irradiated food. In addition, the radiation technology also was utilized for processing of non-food items including herbs, medicinal produces, and tobacco material. Since 1996 VAEC and INST has realized the important role of radiation processing on natural polymers. Hence, along with the commercialization of radiation technology, three research teams were established for the target. This report reviews the recent activities and achievements on radiation technology in the country emphasizing on the radiation processing of polysaccharides. A number of polysaccharides, which originated from bio-/agro-wastes such as seaweed, shrimp shells, lignocelluloses, was modified or degraded by irradiation to prepare hydrogel and bio-active material using for health-care and crop production. (author)

Radiation technology in Vietnam

International Nuclear Information System (INIS)

Vo Van Thuan

2001-01-01

Most of researches and developments in the field of radiation technology that have completed in a decade before 1995 were concentrated to sterilization and food irradiation. A series of medical devices and products were the main commodities for research and application trials. Also, many kind of food have attracted the scientists and technologists to investigate the application and commercialization of irradiated food. In addition, the radiation technology also was utilized for processing of non-food items including herbs, medicinal produces, and tobacco material. Since 1996 VAEC and INST has realized the important role of radiation processing on natural polymers. Hence, along with the commercialization of radiation technology, three research teams were established for the target. This report reviews the recent activities and achievements on radiation technology in the country emphasizing on the radiation processing of polysaccharides. A number of polysaccharides, which originated from bio-/agro-wastes such as seaweed, shrimp shells, lignocelluloses, was modified or degraded by irradiation to prepare hydrogel and bio-active material using for health-care and crop production. (author)

Societal applications of isotope/radiation technology in industry and hydrology

International Nuclear Information System (INIS)

Singh, Gurusharan

2012-01-01

Besides generation of electricity from nuclear fuels, one of the objectives of the Atomic Energy Programme in India is development and promotion of applications of radioisotopes and radiation technology in all major fields of human endeavor. The applications of isotopes both as stable and as radioactive and electronic radiation sources is increasing at a rapid pace in all major fields of human endeavor. These applications expanded greatly when it became possible to produce a variety of radioisotopes artificially in nuclear reactors and by bombardment of the targets with high energy particles. With the recent developments in the supporting technologies such as compact electronics, high resolution detectors, fast computers, small reliable neutron tubes, dedicated computer modeling codes and better data interpretation, one can now satisfy the longstanding demand for immediate, accurate and detailed information about the test specimen. As a result of the radioisotope programme, the country has a strong infrastructure in various fields including applications in industry. One major area of industrial applications of radioisotopes is their use as sealed radioactive sources and as radioactive tracers for troubleshooting, process control and process vessel design modification. These applications are mostly online, nondestructive and noninvasive. Radioisotope techniques can perform many tasks better, easier, quicker, relatively simply, cost effectively than alternative methods and have no substitutes in many applications, and are used extensively in all areas of industry, research, medicine and agriculture. Sealed source techniques of radioisotope applications provide valuable, non destructive and noninvasive insight to the process and plant problems. These are either supplementary to or more convenient than tracer techniques. These applications do not require much preparation time and hence can be carried out at short notice. The use of these techniques is growing steadily

Non-food radiation technology applications of food commodities

International Nuclear Information System (INIS)

Mastro, N.L. Del

2004-01-01

At present food irradiation is considered an effective, broad-spectrum, residue-free, mature technology. Expertise in irradiation processing exists in a network of centers around the world, some of them in developing countries like Brazil and Argentina South American region. The use of renewable resources coming from crops products is becoming attractive also for non-food applications. In this sense, a complete new approach of higher aggregated value of some commodities like soy and maize, for example, is as renewable resources to create functional polymers, mainly for innovative biodegradable packaging solutions. There is a need of innovative approaches to produce edible/biodegradable materials from natural polymeric macromolecules with adequate properties. Incipient researches pointed to the successful use of irradiation processing to obtain or modify different types of biodegradable/edible plastic materials. This new radiation technology application is particularly important for countries that are leading producers of soybean and other commodities. (Author)

Non-food radiation technology applications of food commodities

Energy Technology Data Exchange (ETDEWEB)

Mastro, N.L. Del . [Center of Radiation Technology, Energy and Nuclear Research Institute (IPEN-CNEN/SP), Travessa R, 400 Cidade Universitaria, 05508-900 Sao Paulo (Brazil)

2004-07-01

At present food irradiation is considered an effective, broad-spectrum, residue-free, mature technology. Expertise in irradiation processing exists in a network of centers around the world, some of them in developing countries like Brazil and Argentina South American region. The use of renewable resources coming from crops products is becoming attractive also for non-food applications. In this sense, a complete new approach of higher aggregated value of some commodities like soy and maize, for example, is as renewable resources to create functional polymers, mainly for innovative biodegradable packaging solutions. There is a need of innovative approaches to produce edible/biodegradable materials from natural polymeric macromolecules with adequate properties. Incipient researches pointed to the successful use of irradiation processing to obtain or modify different types of biodegradable/edible plastic materials. This new radiation technology application is particularly important for countries that are leading producers of soybean and other commodities. (Author)

Radiation Technology

International Nuclear Information System (INIS)

1990-01-01

The conference was organized to evaluate the application directions of radiation technology in Vietnam and to utilize the Irradiation Centre in Hanoi with the Co-60 source of 110 kCi. The investigation and study of technico-economic feasibility for technology development to various items of food and non-food objects was reported. (N.H.A)

Philippine country report on radiation technology

International Nuclear Information System (INIS)

Cabalfin, E.G.

1993-01-01

This report was presented during the First National Coordinators Meeting for Radiation Technology, held in Takasaki, Japan, 6-9 September 1993. The report was about the active involvement of Philippine Nuclear Research Institute (PNRI) in research and development on the application of radiation technology. Activities were on mutation breeding, food irradiation, radiation sterilization, wood-plastic combinations and radiation chemistry. The transfer of technology in the Philippines was supported and assisted by the UNDP/IAEA Industrial Project. With these technologies, many industries were interested in radiation processing

Pulsed electron accelerator for radiation technologies in the enviromental applications

Science.gov (United States)

Korenev, Sergey

1997-05-01

The project of pulsed electron accelerator for radiation technologies in the environmental applications is considered. An accelerator consists of high voltage generator with vacuum insulation and vacuum diode with plasma cathode on the basis discharge on the surface of dielectric of large dimensions. The main parameters of electron accelerators are following: kinetic energy 0.2 - 2.0 MeV, electron beam current 1 - 30 kA and pulse duration 1- 5 microseconds. The main applications of accelerator for decomposition of wastewaters are considered.

Development and application of isotopes and radiation technology in Indonesia

Energy Technology Data Exchange (ETDEWEB)

Djaloeis, A. [DDG, Batan, Jakarta (Indonesia)

1997-10-01

The National Atomic Energy Agency (BATAN) of the Republic of Indonesia is the highest agency in the country, charged amongst others with the development and application of Isotopes and Radiation Technology as a tool in the search for the optimal solution of various national development problems, such as those encountered in the fields of Agriculture, Livestock, health/medicine, Industry, Environment and Energy. The acquisition and development of the scientific and technical expertise, R and D facilities/instruments and infrastructure have been achieved primarily through bilateral and multilateral collaborative activities with domestic, foreign and international institutions. On the basis of the achieved R and D results, the acquired techniques have been progressively transferred to the end-users and applied in solving scientific-technical problems in the aforementioned fields. This paper gives a brief overview of the present status and future trend of activities in the development and applications of isotopes and radiation technology in Agriculture, Livestock and Industry in Indonesia. In the field of Agriculture the research activities are focussed on obtaining and disseminating new crop varieties with desired specific characteristics and on increasing soil fertilizer efficiency. These research results and those on livestock feed supplementation formula and disease prevention have been applied in helping farmers in various parts of Indonesia to increase their productivity. In industry, irradiation technology for food preservation and sterilization has been successfully transferred to the commercial companies. The same is also true for Non-Destructive Examination, Radioactive Tracer and Radiation Based Process Monitoring Techniques. Natural and radioactive isotopes have been widely used also in hydrology, sedimentology and geothermal studies. Highlights of the results are presented and discussed

Development and application of isotopes and radiation technology in Indonesia

International Nuclear Information System (INIS)

Djaloeis, A.

1997-01-01

The National Atomic Energy Agency (BATAN) of the Republic of Indonesia is the highest agency in the country, charged amongst others with the development and application of Isotopes and Radiation Technology as a tool in the search for the optimal solution of various national development problems, such as those encountered in the fields of Agriculture, Livestock, health/medicine, Industry, Environment and Energy. The acquisition and development of the scientific and technical expertise, R and D facilities/instruments and infrastructure have been achieved primarily through bilateral and multilateral collaborative activities with domestic, foreign and international institutions. On the basis of the achieved R and D results, the acquired techniques have been progressively transferred to the end-users and applied in solving scientific-technical problems in the aforementioned fields. This paper gives a brief overview of the present status and future trend of activities in the development and applications of isotopes and radiation technology in Agriculture, Livestock and Industry in Indonesia. In the field of Agriculture the research activities are focussed on obtaining and disseminating new crop varieties with desired specific characteristics and on increasing soil fertilizer efficiency. These research results and those on livestock feed supplementation formula and disease prevention have been applied in helping farmers in various parts of Indonesia to increase their productivity. In industry, irradiation technology for food preservation and sterilization has been successfully transferred to the commercial companies. The same is also true for Non-Destructive Examination, Radioactive Tracer and Radiation Based Process Monitoring Techniques. Natural and radioactive isotopes have been widely used also in hydrology, sedimentology and geothermal studies. Highlights of the results are presented and discussed

Basic radiation effects in nuclear power electronics technology

International Nuclear Information System (INIS)

Gover, J.E.; Srour, J.R.

1985-05-01

An overview is presented of the effects of radiation in microelectronics technology. The approach taken throughout these notes is to review microscopic phenomena associated with radiation effects and to show how these lead to macroscopic effects in semiconductor devices and integrated circuits. Bipolar integrated circuits technology is reviewed in Appendix A. Appendix B gives present and future applications of radiation-tolerant microelectronics in nuclear power applications as well as the radiation tolerance requirements of these applications

IAEA programme in the field of radiation technology

International Nuclear Information System (INIS)

Chmielewski, Andrzej G.; Haji-Saeid, Mohammad

2005-01-01

Radiation technologies applying gamma sources and electron accelerators for material modification are well-established processes. There are over 160 gamma industrial irradiators and 1300 electron industrial accelerators in operation worldwide. A new advancement in the field of radiation sources engineering is the development of high power direct e - /X conversion sources based on electron accelerators. Technologies to be developed beside environmental applications could be nanomaterials, structure engineered materials (sorbents, composites, ordered polymers, etc.) and natural polymers' processing. New products based on radiation-processed polysaccharides have already been commercialised in many countries of the East Asia and Pacific Region, especially in those being rich in natural polymers. Very important and promising applications concern environmental protection-radiation technology, being a clean and environment friendly process, helps to curb pollutants' emission as well. Industrial plants for flue gas treatment have been constructed in Poland and China. The pilot plant in Bulgaria using this technology has just started its operation. The Polish plant is equipped with accelerators of over 1 MW power, a breakthrough in radiation technology application. The industrial plant for wastewater treatment is under development in Korea and a pilot plant for sewage sludge irradiation has been in operation in India for many years. Due to recent developments, the Agency has restructured its programme and organized a Technical Meeting (TM) on 'Emerging Applications of Radiation Technology for the 21st Century' at its Headquarters in Vienna, Austria, in April 2003, to review the present situation and possible developments of radiation technology to contribute to a sustainable development. This meeting provided the basic input to launch others in the most important fields of radiation technology applications: 'Advances in Radiation Chemistry of Polymers' (Notre Dame, USA

IAEA programme in the field of radiation technology

Science.gov (United States)

Chmielewski, Andrzej G.; Haji-Saeid, Mohammad

2005-07-01

Radiation technologies applying gamma sources and electron accelerators for material modification are well-established processes. There are over 160 gamma industrial irradiators and 1300 electron industrial accelerators in operation worldwide. A new advancement in the field of radiation sources engineering is the development of high power direct e-/X conversion sources based on electron accelerators. Technologies to be developed beside environmental applications could be nanomaterials, structure engineered materials (sorbents, composites, ordered polymers, etc.) and natural polymers' processing. New products based on radiation-processed polysaccharides have already been commercialised in many countries of the East Asia and Pacific Region, especially in those being rich in natural polymers. Very important and promising applications concern environmental protection-radiation technology, being a clean and environment friendly process, helps to curb pollutants' emission as well. Industrial plants for flue gas treatment have been constructed in Poland and China. The pilot plant in Bulgaria using this technology has just started its operation. The Polish plant is equipped with accelerators of over 1 MW power, a breakthrough in radiation technology application. The industrial plant for wastewater treatment is under development in Korea and a pilot plant for sewage sludge irradiation has been in operation in India for many years. Due to recent developments, the Agency has restructured its programme and organized a Technical Meeting (TM) on "Emerging Applications of Radiation Technology for the 21st Century" at its Headquarters in Vienna, Austria, in April 2003, to review the present situation and possible developments of radiation technology to contribute to a sustainable development. This meeting provided the basic input to launch others in the most important fields of radiation technology applications: "Advances in Radiation Chemistry of Polymers" (Notre Dame, USA

Some progress on radiation chemistry of substances of biological interests and biological applications of radiation technology in China

International Nuclear Information System (INIS)

Wu Jilan; Fang Xingwang

1995-01-01

Studies in China on the detection method of irradiated food, mechanism of DNA damage induced by peroxidation, radiolysis of natural products and herbs are reviewed on the update open literature, and some progress on applications of radiation technology is summarized. (author)

Status of radiation detector and neutron monitor technology

CERN Document Server

Kim, Y K; Ha, J H; Han, S H; Hong, S B; Hwang, I K; Lee, W G; Moon, B S; Park, S H; Song, M H

2002-01-01

In this report, we describe the current states of the radiation detection technology, detectors for industrial application, and neutron monitors. We also survey the new technologies being applied to this field. The method to detect radiation is the measurement of the observable secondary effect from the interaction between incident radiation and detector material, such as ionization, excitation, fluorescence, and chemical reaction. The radiation detectors can be categorized into gas detectors, scintillation detectors, and semiconductor detectors according to major effects and main applications. This report contains the current status and operational principles of these detectors. The application fields of radiation detectors are industrial measurement system, in-core neutron monitor, medical radiation diagnostic device, nondestructive inspection device, environmental radiation monitoring, cosmic-ray measurement, security system, fundamental science experiment, and radiation measurement standardization. The st...

Studies on application of radiation and radioisotopes

International Nuclear Information System (INIS)

Kim, Jae Rok; Lee, Ji Bok; Lee, Yeong Iil; Jin, Joon Ha; Beon, Myeong Uh; Park, Kyeong Bae; Han, Heon Soo; Jeong, Yong Sam; Uh, Jong Seop; Kang, Kyeong Cheol; Cho, Han Ok; Song, Hui Seop; Yoon, Byeong Mok; Jeon, Byeong Jin; Park, Hong Sik; Kim, Jae Seong; Jeong, Un Soo; Baek, Sam Tae; Cho, Seong Won; Jeon, Yeong Keon; Kim, Joon Yeon; Kwon, Joong Ho; Kim, Ki Yeop; Yang, Jae Seung; No, Yeong Chang; Lee, Yeong Keun; Shin, Byeong Cheol; Park, Sang Joon; Hong, Kwang Pyo; Cho, Seung Yeon; Kang, Iil Joon; Cho, Seong Ki; Jeong, Yeong Joo; Park, Chun Deuk; Lee, Yeong Koo; Seo, Chun Ha; Han, Kwang Hui; Shin, Hyeon Young; Kim, Jong Kuk; Park, Soon Chul; Shin, In Cheol; Lee, Sang Jae; Lee, Ki Un; Lim, Yong Taek; Park, Eung Uh; Kim, Dong Soo; Jeon, Sang Soo

1993-05-01

With the completion of construction of KMRR, the facility and technology of radiation application will be greatly improved. This study was performed as follows; (1) Studies on the production and application of radioisotopes. (2) The development of radiation processing technology. (3) The application of Irradiation techniques for food preservation and process improvement. (4) Studies on the radiation application for the development of genetic resources (5) Development of the radioisotope (RI) production facilities for Korea Multipurpose Research Reactor (KMRR)

Proceedings of the national seminar and awareness programme on applications of radioisotopes and radiation technology in industry and health care

International Nuclear Information System (INIS)

Durairaj, S.; Madan, V. K.

2012-01-01

The National Seminar and Awareness Program on Applications of Radioisotopes and Radiation Technology in Industry and Health care is an important national event to learn about the challenges in the development and proliferation of application of radioisotopes and radiation technologies, and in appreciation of the role of these technologies to the benefit of public at large. This program endeavors to disseminate knowledge about lesser known and widely applied technologies and send the right message to the people for their greater acceptance. Applications of radioisotopes and radiation technology in industry such as oil, gas, chemical, petrochemical, steel, mining, paper, mineral and automobile and health care such as non-invasive diagnosis and treatment of a range of important and common conditions like cancer and cardiovascular diseases and radiation processed polymer containing hydrogel for use for bum dressing, and medical and agricultural products sterilization, have seen a significant growth in our country in the last fifty years. The indigenous capacity for the development and utilization of these technologies must be further strengthened. Papers relevant to INIS are indexed separately

Radiation technology for environmental conservation

International Nuclear Information System (INIS)

Machi, Sueo; Tokunaga, Okihiro; Arai, Hidehiko; Hashimoto, Shoji

1991-01-01

This paper reviews research and development of radiation technology application for environmental conservation. Our group in cooperation with Ebara Mfg. co., Ltd. first found and studied removals of sulfur dioxide and nitrogen oxides from flue gases by electron beam irradiation. Most of sulfer dioxide and nitrogen oxides are converted to ammonium sulfate and nitrate by radiation with the addition of ammonia. Feasibility studies of this technology by pilot scale experiments have been carried out in Japan, USA and Germany for flue gases from iron-ore sintering furnace and coal fire power station. About 90 % of CO 2 and NO X are removed with 15 kGy. Organic pollutants in wastewater, drinking water and ground water have been found to be reduced by radiation technology. Synergetic effect of radiation and ozone to remove pollutants was also found. Disinfection of water effluent from sewage water treatment plant by radiation instead of using chlorine to avoid formation of chlorinated organic compounds has been studied by our group. Efficient composting of sewage sludge using radiation disinfection followed by fermentation has been developed and produced compost can be used as fertilizer. In conclusion, radiation technology can provide new efficient treatment method for wastes. (author)

Application of radiation technology in vaccines development.

Science.gov (United States)

Seo, Ho Seong

2015-07-01

One of the earliest methods used in the manufacture of stable and safe vaccines is the use of chemical and physical treatments to produce inactivated forms of pathogens. Although these types of vaccines have been successful in eliciting specific humoral immune responses to pathogen-associated immunogens, there is a large demand for the development of fast, safe, and effective vaccine manufacturing strategies. Radiation sterilization has been used to develop a variety of vaccine types, because it can eradicate chemical contaminants and penetrate pathogens to destroy nucleic acids without damaging the pathogen surface antigens. Nevertheless, irradiated vaccines have not widely been used at an industrial level because of difficulties obtaining the necessary equipment. Recent successful clinical trials of irradiated vaccines against pathogens and tumors have led to a reevaluation of radiation technology as an alternative method to produce vaccines. In the present article, we review the challenges associated with creating irradiated vaccines and discuss potential strategies for developing vaccines using radiation technology.

Status of radiation-based measurement technology

International Nuclear Information System (INIS)

Moon, B. S.; Lee, J. W.; Chung, C. E.; Hong, S. B.; Kim, J. T.; Park, W. M.; Kim, J. Y.

1999-03-01

This report describes the status of measurement equipment using radiation source and new technologies in this field. This report includes the development status in Korea together with a brief description of the technology development and application status in ten countries including France, America, and Japan. Also this report describes technical factors related to radiation-based measurement and trends of new technologies. Measurement principles are also described for the equipment that is widely used among radiation-based measurement, such as level measurement, density measurement, basis weight measurement, moisture measurement, and thickness measurement. (author). 7 refs., 2 tabs., 21 figs

POTENTIAL AND FUTURE TRENDS ON INDUSTRIAL RADIATION PROCESSING TECHNOLOGY APPLICATION IN EMERGING COUNTRY - BRAZIL

International Nuclear Information System (INIS)

Sampa, M.H.O.; Omi, N.M.; Rela, C.S.; Tsai, D.

2004-01-01

Brazil started the use of radiation technology in the seventies on crosslinking polyethylene for insulation of wire and electronic cables and sterilization of medical care devices. The present status of industrial applications of radiation shows that the use of this technology is increasing according to the economical development and the necessity to become the products manufactured in the local industries competitive in quality and price for internal and external market. The on going development activities in this area are concentrated on polymers processing (materials modification), foodstuff treatment and environmental protection. The development, the promotion and the technical support to consolidate this technology to the local industries is the main attribution of Institute for Energetic and Nuclear Research-IPEN, a governmental Institution

POTENTIAL AND FUTURE TRENDS ON INDUSTRIAL RADIATION PROCESSING TECHNOLOGY APPLICATION IN EMERGING COUNTRY - BRAZIL

Energy Technology Data Exchange (ETDEWEB)

Sampa, M.H.O.; Omi, N.M.; Rela, C.S.; Tsai, D.

2004-10-06

Brazil started the use of radiation technology in the seventies on crosslinking polyethylene for insulation of wire and electronic cables and sterilization of medical care devices. The present status of industrial applications of radiation shows that the use of this technology is increasing according to the economical development and the necessity to become the products manufactured in the local industries competitive in quality and price for internal and external market. The on going development activities in this area are concentrated on polymers processing (materials modification), foodstuff treatment and environmental protection. The development, the promotion and the technical support to consolidate this technology to the local industries is the main attribution of Institute for Energetic and Nuclear Research-IPEN, a governmental Institution.

Potential applications of radiation technology in meat industry

International Nuclear Information System (INIS)

Chawla, S.P.; Kanatt, S.R.; Rao, M.S.; Sharma, Arun

2009-01-01

Microbial load determines shelf-life and safety of meat products. Radiation technology is an effective tool in eliminating spoilage and pathogenic microbes in meat products. Radiation processing of meat can work in synergy with traditional preservation methods to enhance shelf-life and safety of meat products. (author)

Radiation technology for environmental conservation

Energy Technology Data Exchange (ETDEWEB)

Machi, Sueo; Tokunaga, Okihiro; Arai, Hidehiko; Hashimoto, Shoji [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

1991-01-01

This paper reviews research and development of radiation technology application for environmental conservation. Our group in cooperation with Ebara Mfg. co., Ltd. first found and studied removals of sulfur dioxide and nitrogen oxides from flue gases by electron beam irradiation. Most of sulfer dioxide and nitrogen oxides are converted to ammonium sulfate and nitrate by radiation with the addition of ammonia. Feasibility studies of this technology by pilot scale experiments have been carried out in Japan, USA and Germany for flue gases from iron-ore sintering furnace and coal fire power station. About 90 % of CO{sub 2} and NO{sub X} are removed with 15 kGy. Organic pollutants in wastewater, drinking water and ground water have been found to be reduced by radiation technology. Synergetic effect of radiation and ozone to remove pollutants was also found. Disinfection of water effluent from sewage water treatment plant by radiation instead of using chlorine to avoid formation of chlorinated organic compounds has been studied by our group. Efficient composting of sewage sludge using radiation disinfection followed by fermentation has been developed and produced compost can be used as fertilizer. In conclusion, radiation technology can provide new efficient treatment method for wastes. (author).

Activities of RADA in promotion of radiation applications

International Nuclear Information System (INIS)

Tanase, M.; Funayama, Y.; Tanaka, O.

2007-01-01

Radiation Application Development Association (RADA) was established to promote the applications of radiation in 1968. Among the activities of RADA, we have five works directly to promote the application of radiation to the public. One of them is to publish a quarterly journal 'Radiation and Industries' which carries comprehensive articles on timely topics of radiation-based applications, patent information etc. And also RADA organizes the Radiation Process Symposium, which has been held every other year strictly, for exchange of information on radiation applications. The symposium started in 1985, where researchers and engineers in various and wide fields have been discussed on the radiation applications to industries. As the third, RADA distributes beautiful ornaments, which were produced by gamma-ray irradiation of crystals, glass and pearls, to promote better understanding of radiation. We also have taken charge of two businesses contracted with the Ministry of Education, Culture, Sports, Science and Technology (MEXT). One is to hold seminars on radiation and nuclear energy for teachers of primary, junior high and senior high schools to enhance their understanding about radiation and nuclear energy, and to facilitate the use in their classrooms of such knowledge concerning energy, environment and their effects on our lives. The other is to facilitate the transfer of technologies of radiation application in the realms of industry, agriculture, medical treatment, etc. through dispatching of experts, releasing data on radiation applications, and organizing technical seminars. Recently, we arranged an opportunity to use neutrons from research reactors through trial experiments for transferring the technology to industries. (author)

Application of radiation technology in starch modification

International Nuclear Information System (INIS)

Chen Huiyuan; Peng Zhigang; Ding Zhongmin; Lu Jiajiu

2007-01-01

In order to commercialize the radiation modification of starch, corn starch was irradiated with different dose of 60 Co gamma radiations. Some basic physical and chemical properties of the resulted modified starch paste were measured with emphasis on the viscosity stability and tensile strength. The results indicate that irradiation of corn starch with a dose of 4-10 kGy can decrease its viscosity to 5-14 mPa·s, and the tensile strength can meet the standard set up for textile paste. In comparison with chemical modification for starch, radiation modification is simpler in technology, more convenient in operation, more stable in modification quality, and easier to control. The mechanism of radiation modification of starch was also discussed. (authors)

The application of radiation technology in industrial processes

International Nuclear Information System (INIS)

Silvermann, J.

1974-01-01

The author makes a general survey of current applications for radiation processing such as sterilization of biological and medical supplies, crosslinking of polymers, production of durable press fabrics, radiation-cured coating, production of wood-plastic composites, radiation degradation and chemical synthesis. The adoption of radiation processing on large scale by Western Electric is presented. The trend in costs and the environmental problems has a profound effect on the future of radiation processing. (M.S.)

Radiation processing: a versatile technology for industry

International Nuclear Information System (INIS)

Cabalfin, E.G.

1996-01-01

Soon after the discovery of x-ray in 1895 and radioactivity in 1896, it was recognized that ionizing radiation can modify the chemical, physical and/or biological properties of materials. However, it was only in the late 50's, when large radiation sources become available, has this unique property of radiation found industrial applications in radiation processing. Today, radiation processing has been used by industry in such diverse applications, such as radiation sterilization/decontamination of medical products, pharmaceuticals, cosmetics and their raw materials; radiation cross-linking of wire and cable insulation; production of heat shrinkable materials and polymer foam; and radiation curing of coatings, adhesives and inks on a wide variety of substrates. In addition to being a clean environment-friendly technology, radiation processing can also be used for the conservation of the environment by such processes as radiation treatment of flue gases to remove SO 2 and NO x and disinfection of sewage sludge. Because of the many advantages offered by radiation processing, industry is showing strong interest in the technology as evidenced by the growing number of industrial radiation facilities in many countries. (author)

Optical Tracking Technology in Stereotactic Radiation Therapy

International Nuclear Information System (INIS)

Wagner, Thomas H.; Meeks, Sanford L.; Bova, Frank J.; Friedman, William A.; Willoughby, Twyla R.; Kupelian, Patrick A.; Tome, Wolfgang

2007-01-01

The last decade has seen the introduction of advanced technologies that have enabled much more precise application of therapeutic radiation. These relatively new technologies include multileaf collimators, 3-dimensional conformal radiotherapy planning, and intensity modulated radiotherapy in radiotherapy. Therapeutic dose distributions have become more conformal to volumes of disease, sometimes utilizing sharp dose gradients to deliver high doses to target volumes while sparing nearby radiosensitive structures. Thus, accurate patient positioning has become even more important, so that the treatment delivered to the patient matches the virtual treatment plan in the computer treatment planning system. Optical and image-guided radiation therapy systems offer the potential to improve the precision of patient treatment by providing a more robust fiducial system than is typically used in conventional radiotherapy. The ability to accurately position internal targets relative to the linac isocenter and to provide real-time patient tracking theoretically enables significant reductions in the amount of normal tissue irradiated. This report reviews the concepts, technology, and clinical applications of optical tracking systems currently in use for stereotactic radiation therapy. Applications of radiotherapy optical tracking technology to respiratory gating and the monitoring of implanted fiducial markers are also discussed

Radiation biodosimetry: Applications for spaceflight

Science.gov (United States)

Blakely, W. F.; Miller, A. C.; Grace, M. B.; McLeland, C. B.; Luo, L.; Muderhwa, J. M.; Miner, V. L.; Prasanna, P. G. S.

The multiparametric dosimetry system that we are developing for medical radiological defense applications could be adapted for spaceflight environments. The system complements the internationally accepted personnel dosimeters and cytogenetic analysis of chromosome aberrations, considered the best means of documenting radiation doses for health records. Our system consists of a portable hematology analyzer, molecular biodosimetry using nucleic acid and antigen-based diagnostic equipment, and a dose assessment management software application. A dry-capillary tube reagent-based centrifuge blood cell counter (QBC Autoread Plus, Beckon Dickinson Bioscience) measures peripheral blood lymphocytes and monocytes, which could determine radiation dose based on the kinetics of blood cell depletion. Molecular biomarkers for ionizing radiation exposure (gene expression changes, blood proteins) can be measured in real time using such diagnostic detection technologies as miniaturized nucleic acid sequences and antigen-based biosensors, but they require validation of dose-dependent targets and development of optimized protocols and analysis systems. The Biodosimetry Assessment Tool, a software application, calculates radiation dose based on a patient's physical signs and symptoms and blood cell count analysis. It also annotates location of personnel dosimeters, displays a summary of a patient's dosimetric information to healthcare professionals, and archives the data for further use. These radiation assessment diagnostic technologies can have dual-use applications supporting general medical-related care.

Parameterization models for solar radiation and solar technology applications

Energy Technology Data Exchange (ETDEWEB)

Khalil, Samy A. [National Research Institute of Astronomy and Geophysics, Solar and Space Department, Marsed Street, Helwan, 11421 Cairo (Egypt)

2008-08-15

Solar radiation is very important for the evaluation and wide use of solar renewable energy systems. The development of calibration procedures for broadband solar radiation photometric instrumentation and the improvement of broadband solar radiation measurement accuracy have been done. An improved diffuse sky reference and photometric calibration and characterization software for outdoor pyranometer calibrations are outlined. Parameterizations for direct beam, total hemispherical and diffuse sky radiation and solar radiation technology are briefly reviewed. The uncertainties for various broadband solar radiations of solar energy and atmospheric effects are discussed. The varying responsivities of solar radiation with meteorological, statistical and climatological parameters and possibility atmospheric conditions was examined. (author)

Parameterization models for solar radiation and solar technology applications

International Nuclear Information System (INIS)

Khalil, Samy A.

2008-01-01

Solar radiation is very important for the evaluation and wide use of solar renewable energy systems. The development of calibration procedures for broadband solar radiation photometric instrumentation and the improvement of broadband solar radiation measurement accuracy have been done. An improved diffuse sky reference and photometric calibration and characterization software for outdoor pyranometer calibrations are outlined. Parameterizations for direct beam, total hemispherical and diffuse sky radiation and solar radiation technology are briefly reviewed. The uncertainties for various broadband solar radiations of solar energy and atmospheric effects are discussed. The varying responsivities of solar radiation with meteorological, statistical and climatological parameters and possibility atmospheric conditions was examined

Accelerators for the advanced radiation technology project

International Nuclear Information System (INIS)

Maruyama, Michio

1990-01-01

Ion beam irradiation facilities are now under construction for the advanced radiation technology (ART) project in Takasaki Radiation Chemistry Research Establishment of (Japan Atomic Energy Research Institute) JAERI. The project is intended to make an effective use of ion beams, especially ion beams, in the research field of radiation application technology. The TIARA (Takasaki Ion Accelerators for Advanced Radiation Application) facilities include four ion accelerators to produce almost all kinds of energetic ions in the periodic table. The facilities are also provided with several advanced irradiation means and act as very powerful accelerator complex for material development. Specifically, this report presents an outline of the ART project, features of TIARA as accelerator facilities dedicated to material development, the AVF cyclotron under construction (Sumitomo Heavy Industries, Ltd., Model 930), tandem accelerator, microbeam, and experimental instruments used. (N.K.)

Environmental radiation sensing technologies

International Nuclear Information System (INIS)

Nishizawa, Hiroshi; Inomata, Kenji; Tamuro, Masaru; Fujita, Kazuhiko

2013-01-01

After the Fukushima nuclear accident, environmental radiation monitoring and radioactivity measurement of contamination of wastes, soils, food and drinking water were needed in accurate and reliable way. Based on radiation sensing technologies and radiation and light coupled analysis method, new environmental radiation measurement system for simple monitoring post without exclusive house and also portable monitoring post for temporary use were developed with low cost. Measurement accuracy was improved by real-time processing of detected pulses and corrected non-linearity of low-energy range by analysis. Environmental performance was upgraded to assure detector gain with compensated against temperature change and aging. Inspection and maintenance were also simplified using touch panel display with standardized application menu and data format. (T. Tanaka)

Solid-state radiation detectors technology and applications

CERN Document Server

2015-01-01

The book discusses the current solid state material used in advance detectors manufacturing and their pros and cons and how one can tailor them using different techniques, to get the maximum performance. The book is application oriented to radiation detectors for medical, X and gamma rays application, and good reference with in-depth discussion of detector's physics as it relates to medical application tailored for engineers and scientists.

Applications of electron beam technology for healthcare and environment

International Nuclear Information System (INIS)

Varshney, Lalit

2013-01-01

Radiation technology has matured from lab scale to industrial scale in many areas of interests to industry, healthcare, agriculture and environment. Some of the well established applications include radiation sterilization, wires and cable, composites for automobiles, radiation surface curing, nanomaterials, hydrogels and special materials for nuclear and aerospace industry, radiation treatment of effluents, sewage sludge etc. These applications are as a result of characteristics of high energy radiation like gamma and electron beams which are able to deliver energy directly at molecular level. Unlike nuclear based radiations, electron beam accelerator technology is amenable to easy acceptance by public as well has capability to manipulate processes and product treatment to produce varieties of advanced/smart materials for healthcare and environment. Faster dose rates and depth profiling are the important characteristics of electron beam technology which gives it an edge over gamma radiation processing. Department of Atomic Energy has an ambitious program to indigenously develop accelerator technology and utilize them for national progress. In the presentation some important applications of radiation technology will be discussed. (author)

Development of Sensor Technology and Its Application for Nuclear Radiation Detection

International Nuclear Information System (INIS)

Hiskia

2007-01-01

Radiation is energy in the form of waves or moving subatomic particles. Radiation can be ionizing or nonionizing radiation, depending on its effect on atomic matter. Because radiation cannot be seen, felt, tasted, heard or smelled, even at lethal levels, radiations detection devices must be used to alert those exposed to radiation. The measurement of radioactivity in the environment is a regulatory requirement around sites where significant amounts of radioactive materials are used or stored. Recently, advent in microelectronics and material technology has enabled to produce small sensor or microsensor, sensitive, accurate, and integrated in a chip or substrate. Development of radiation sensor technology using thin/thick film and micromachining technique was described in this paper. Indonesian capabilities in radiation sensor research and development and opportunities for commercialization also given. (author)

The Development of Sensor Technology and Application to Detect Nuclear Radiation

International Nuclear Information System (INIS)

Hiskia

2007-01-01

Radiation is energy in the form of waves or moving subatomic particles. Radiation can be ionizing or non-ionizing radiation, depending on its effect on atomic matter. Because radiation cannot be seen, felt, tasted, heard or smelled, even at lethal levels, radiations detection devices must be used to alert those exposed to radiation. The measurement of radioactivity in the environment is a regulatory requirement around sites where significant amounts of radioactive materials are used or stored. Recently, advent in microelectronics and material technology has enabled to produce small sensor or microsensor, sensitive, accurate, and integrated in a chip or substrate. Development of radiation sensor technology using thin/thick film and micromachining technique was described in this paper. Indonesian capabilities in radiation sensor research and development and opportunities for commercialization also given. (author)

Open Source Radiation Hardened by Design Technology

Science.gov (United States)

Shuler, Robert

2016-01-01

The proposed technology allows use of the latest microcircuit technology with lowest power and fastest speed, with minimal delay and engineering costs, through new Radiation Hardened by Design (RHBD) techniques that do not require extensive process characterization, technique evaluation and re-design at each Moore's Law generation. The separation of critical node groups is explicitly parameterized so it can be increased as microcircuit technologies shrink. The technology will be open access to radiation tolerant circuit vendors. INNOVATION: This technology would enhance computation intensive applications such as autonomy, robotics, advanced sensor and tracking processes, as well as low power applications such as wireless sensor networks. OUTCOME / RESULTS: 1) Simulation analysis indicates feasibility. 2)Compact voting latch 65 nanometer test chip designed and submitted for fabrication -7/2016. INFUSION FOR SPACE / EARTH: This technology may be used in any digital integrated circuit in which a high level of resistance to Single Event Upsets is desired, and has the greatest benefit outside low earth orbit where cosmic rays are numerous.

National Laboratory of Synchrotron Radiation: technologic potential

International Nuclear Information System (INIS)

Silva, C.E.T.G. da; Rodrigues, A.R.D.

1987-01-01

The technological or industrial developments based on the accumulated experience by research group of condensed matter physics, in Brazil, are described. The potential of a National Laboratory of Synchrotron Radiation for personnel training, absorption and adaptation of economically important technologies for Brazil, is presented. Examples of cooperations between the Laboratory and some national interprises, and some industrial applications of the synchrotron radiation are done. (M.C.K.) [pt

World perspective of radiation and isotope application

International Nuclear Information System (INIS)

Machi, Sueo

2005-01-01

Nuclear technology for non-power application has been serving in contribution to sustainable development and human welfare in terms of environmental protection, human health, clean energy and food security. The paper focuses on radiation processing for manufacturing and sterilization, non-destructive testing by radiography for quality control, nucleonic control systems for process control and optimization, and tracer technology for process optimization and trouble-shooting. More specifically, the paper reports heat and chemical resistant polymers produced by radiation cross-linking, the curing of surface coatings, and recent trends in radiation sources for industrial processing including ion beam sources. It further reports radiation sterilization of medical products and radiation technology for cleaning flue gases from power stations burning coal or oil emitting air polluting substances. As agricultural applications, plant mutation breeding for improving productivity, food irradiation for safe use of foods, and controlling of insect pests replacing pesticide are mentioned. Finally, an important role of international cooperation, such as IAEA-RCA program, FNCA (Forum for Nuclear Cooperation in Asia), and bilateral collaboration, to promote technology transfer to developing countries is stressed. (S. Ohno)

Structural Change of Biomolecules and Application of Synergistic Interaction by Radiation

International Nuclear Information System (INIS)

Kim, Jin Kyu; Kim, J. H.; Yang, J. S.

2008-12-01

It is expected that motivation and basic technologies for the future R and D plans can be provided from the results of this study. This study has been done to develop fundamentals for radiation applications based on the existing radiation technology, and to establish technical basis for enhancing efficacy of radiation utilization by studying the simultaneous application of ionizing radiation with another factor. Application of radiation technology together with the existing technologies to enhance the physical, chemical, biological characteristics through structural changes of biomolecules will exert a favorable influence on the creation of de novo scientific and industrial values. A theoretical model for the combined action of ionizing radiation with another factor can make it possible to predict a prior the maximum value of synergistic interaction and the conditions for it. Furthermore, the results of this study give a clues for establishment of fundamental theories associated with positive efficacy of radiation applications

Structural Change of Biomolecules and Application of Synergistic Interaction by Radiation

Energy Technology Data Exchange (ETDEWEB)

Kim, Jin Kyu; Kim, J. H.; Yang, J. S.

2008-12-15

It is expected that motivation and basic technologies for the future R and D plans can be provided from the results of this study. This study has been done to develop fundamentals for radiation applications based on the existing radiation technology, and to establish technical basis for enhancing efficacy of radiation utilization by studying the simultaneous application of ionizing radiation with another factor. Application of radiation technology together with the existing technologies to enhance the physical, chemical, biological characteristics through structural changes of biomolecules will exert a favorable influence on the creation of de novo scientific and industrial values. A theoretical model for the combined action of ionizing radiation with another factor can make it possible to predict a prior the maximum value of synergistic interaction and the conditions for it. Furthermore, the results of this study give a clues for establishment of fundamental theories associated with positive efficacy of radiation applications

Calibration services for medical applications of radiation

Energy Technology Data Exchange (ETDEWEB)

DeWerd, L.A.

1993-12-31

Calibration services for the medical community applications of radiation involve measuring radiation precisely and having traceability to the National Institute of Standards and Technology (NIST). Radiation therapy applications involve the use of ionization chambers and electrometers for external beams and well-type ionization chamber systems as well as radioactive sources for brachytherapy. Diagnostic x-ray applications involve ionization chamber systems and devices to measure other parameters of the x-ray machine, such as non-invasive kVp meters. Calibration laboratories have been established to provide radiation calibration services while maintaining traceability to NIST. New radiation applications of the medical community spur investigation to provide the future calibration needs.

Calibration services for medical applications of radiation

International Nuclear Information System (INIS)

DeWerd, L.A.

1993-01-01

Calibration services for the medical community applications of radiation involve measuring radiation precisely and having traceability to the National Institute of Standards and Technology (NIST). Radiation therapy applications involve the use of ionization chambers and electrometers for external beams and well-type ionization chamber systems as well as radioactive sources for brachytherapy. Diagnostic x-ray applications involve ionization chamber systems and devices to measure other parameters of the x-ray machine, such as non-invasive kVp meters. Calibration laboratories have been established to provide radiation calibration services while maintaining traceability to NIST. New radiation applications of the medical community spur investigation to provide the future calibration needs

Review of radiation effects on ReRAM devices and technology

Science.gov (United States)

Gonzalez-Velo, Yago; Barnaby, Hugh J.; Kozicki, Michael N.

2017-08-01

A review of the ionizing radiation effects on resistive random access memory (ReRAM) technology and devices is presented in this article. The review focuses on vertical devices exhibiting bipolar resistance switching, devices that have already exhibited interesting properties and characteristics for memory applications and, in particular, for non-volatile memory applications. Non-volatile memories are important devices for any type of electronic and embedded system, as they are for space applications. In such applications, specific environmental issues related to the existence of cosmic rays and Van Allen radiation belts around the Earth contribute to specific failure mechanisms related to the energy deposition induced by such ionizing radiation. Such effects are important in non-volatile memory as the current leading technology, i.e. flash-based technology, is sensitive to the total ionizing dose (TID) and single-event effects. New technologies such as ReRAM, if competing with or complementing the existing non-volatile area of memories from the point of view of performance, also have to exhibit great reliability for use in radiation environments such as space. This has driven research on the radiation effects of such ReRAM technology, on both the conductive-bridge RAM as well as the valence-change memories, or OxRAM variants of the technology. Initial characterizations of ReRAM technology showed a high degree of resilience to TID, developing researchers’ interest in characterizing such resilience as well as investigating the cause of such behavior. The state of the art of such research is reviewed in this article.

Radiation processing technology in Malaysia

International Nuclear Information System (INIS)

Khairul Zaman Hj Mohd Dahlan

2004-01-01

Radiation processing technology is widely used in industry to enhance efficiency and productivity, improve product quality and competitiveness. Efforts have been made by MINT to expand the application of radiation processing technology for modification of indigenous materials such as natural rubber and rubber based products, palm oil and palm oil based products and polysaccharide into new and high value added products. This paper described MINT experiences on developing products through R and D from the laboratory to the pilot plant stage and commercialization. The paper also explained some issues and challenges that MINT encountered in the process of commercialization of its R and D results. (author)

Nuclear radiation application to nanotechnology

International Nuclear Information System (INIS)

Chakarvarti, S.K.

2012-01-01

Out of the numerous uses and applications of nuclear radiation, in particular heavy ions, the interaction of radiation with materials have culminated into a gamut of fine tools and technologies for taming the synergetic potential of the interaction. One such field of the immense importance is nanotechnology through nuclear radiation via use of ion-crafted polymeric membranes- so called 'Template Synthesis'. This talk will be addressed to the users of membranes - organic (polymeric) in general, formed through irradiation of polymeric foils with heavy and energetic ions followed by chemical processing leading finally to what is known as 'Track Etch Membranes (TEMs)', and present the review of the innovative uses of these membranes from filtration to electro-kinetic based applications and nano-/micro fabrication of devices- the potent aspect of emerging technologies. The emphasis would be on the dependence of useful and novel usages including applications in nano devices' fabrication. A membrane, with its most comprehensive and clear definition, is an intervening phase separating two phases and/or acting as an active or passive barrier to the transport of matter between phases. The very existence of a membrane relies upon the functionality domain of the pores contained therein. The geometrical traits and morphology of the pore ensembles dictate the applications, which any membrane can serve to. There are variety of membranes being developed and used in myriad of applications in diverse fields of science and technology. The range of commercially available membrane materials is quiet diverse and varies widely in terms of composition, and physical structure. The creation of pores, whether through natural self-assembling phenomenon or man-made processes, might itself be an issue of interest but these are the pore-traits which are fundamentally more important, whether the membrane is being used for sieving-one of the ever most important applications the mankind has been

Emerging applications of radiation processing. Proceedings of a technical meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-01-01

Approximately 160 gamma irradiators and 1200 electron accelerator based processing units are in operation worldwide. In recent years the IAEA has prepared a directory of industrial gamma irradiators and held several meetings on developments in radiation technology applications. Developments involving the engineering of new sources (both isotope and electrical), high power accelerator applications, etc. have been reported recently, making a review and evaluation of this progress timely. Therefore the IAEA organized a technical meeting in Vienna, Austria, from 28 to 30 April 2003 to review the present situation and the potential contribution of radiation technology to sustainable development. Engineering developments and other features of radiation sources, both isotope and accelerator, were discussed. Recent research has concentrated on three fields: medical and food products, polymers, and environmental pollution control. The stability of radiation sterilized medical implants, as well as the uses of radiation processing for sterilization or decontamination of pharmaceuticals and pharmaceutical raw materials, radiation synthesis and modification of polymers for biomedical applications have been studied. Since separation and enrichment technologies play an important role in product recovery and pollution control, the possibility of radiation synthesis of stimuli-responsive membranes, hydrogels and adsorbents is being investigated. Finally, aside from the technologies for flue gas and wastewater treatment already in use, further research is ongoing on the treatment of organic contaminants in both gaseous and liquid phases. Environmental applications, which also offer new opportunities, should be carefully reviewed to reflect existing regulations and current knowledge. The increasingly serious problem of polyaromatic hydrocarbons (PAH) emissions may be solved in part by the application of radiation technology. This is being studied on a pilot scale for the removal of

Emerging applications of radiation processing. Proceedings of a technical meeting

International Nuclear Information System (INIS)

2004-01-01

Approximately 160 gamma irradiators and 1200 electron accelerator based processing units are in operation worldwide. In recent years the IAEA has prepared a directory of industrial gamma irradiators and held several meetings on developments in radiation technology applications. Developments involving the engineering of new sources (both isotope and electrical), high power accelerator applications, etc. have been reported recently, making a review and evaluation of this progress timely. Therefore the IAEA organized a technical meeting in Vienna, Austria, from 28 to 30 April 2003 to review the present situation and the potential contribution of radiation technology to sustainable development. Engineering developments and other features of radiation sources, both isotope and accelerator, were discussed. Recent research has concentrated on three fields: medical and food products, polymers, and environmental pollution control. The stability of radiation sterilized medical implants, as well as the uses of radiation processing for sterilization or decontamination of pharmaceuticals and pharmaceutical raw materials, radiation synthesis and modification of polymers for biomedical applications have been studied. Since separation and enrichment technologies play an important role in product recovery and pollution control, the possibility of radiation synthesis of stimuli-responsive membranes, hydrogels and adsorbents is being investigated. Finally, aside from the technologies for flue gas and wastewater treatment already in use, further research is ongoing on the treatment of organic contaminants in both gaseous and liquid phases. Environmental applications, which also offer new opportunities, should be carefully reviewed to reflect existing regulations and current knowledge. The increasingly serious problem of polyaromatic hydrocarbons (PAH) emissions may be solved in part by the application of radiation technology. This is being studied on a pilot scale for the removal of

Use of radiation technologies in agriculture and medicine

International Nuclear Information System (INIS)

Petukhov, V.K.; Chekushin, A.I.

1994-01-01

The most important directions of radiation and radiation biological technologies in the agriculture and medicine are elucidated. Kazakstan have possibility for application radiation technologies. There is powerful irradiation plant on the base of WWR-K reactor such could use for medicine materials sterilization. Has been proposed gamma-radiation plant with following technical characteristics: sources activity - 100-120 Ku; effective energy of radiation - 0,6-0,7 MeV; gamma-radiation use coefficient - 35 %; irradiation dose rate - 30-40 R/c; nonuniform irradiation rate - 12 %. Processing tools have being situated to hermetically sealed cylindrical container (height - 2 m; diameter - 1,2 m) and then have being put down under water towards gamma-irradiators

Perspectives and problems of application of the effects of ionizing radiation in water treatment technology in Czechoslovakia

International Nuclear Information System (INIS)

Vacek, K.

1978-01-01

Investigations of the possibilities of the utilization of physico-chemical and biological effects of ionizing radiation in water treatment technology has been carried out in Czechoslovakia since 1976. In the area of water sources the radiation recovery of wells clogged with Fe(III) hydroxyoxides as a result of activity of some microorganism begins to be used. Other possible methods of the application of ionizing radiation as increase of disinfection efficiency of chlorination during irradiation, radiation deodorization and discoloration of drinking water are not utilized for economic reasons. In the area of waste water the radiation destruction of solution of some dyestuffs in the presence of charcoal was investigated. This process is complicated and cannot compete with current technologies. Radiation hygienization of sewage sludge with their perspective utilization as fertilizers was also investigated. At present a part of sewage sludge is agrotechnically used, yet with various restrictions. Technical and economic analysis showed that hygienization using electron accelerators would be very desirable as soon as renewed hygienic regulations of sludge depositions become valid. (Auth.)

The development and current status of the technology of isotope and radiation in China

Energy Technology Data Exchange (ETDEWEB)

Zhifu, Luo [Dept. of Isotope, China Inst. of Atomic Energy, Beijing, BJ (China)

1998-10-01

The research and application of the technology of isotopes and radiation have been reviewed. Since the setup of the China`s first nuclear reactor at China Institute of Nuclear Energy in 1958, the technology of isotopes and radiation has been developed significantly. A research and application system has formed a considerable state. The technology of isotopes and radiation has been taken into the fields of industry, agriculture, medicine, and scientific research. The main achievements are on radiopharmaceuticals, radiation source, radiation process, and radioactive tracers. (author)

Advisory group meeting on new trends and developments in radiation technology

International Nuclear Information System (INIS)

1993-02-01

High energy, ionizing radiation (gamma and electron beams) has been used by industry for many years and for different applications. Well established applications include: industrial sterilization of health care products (medical products and medicinals), radiation modification of plastics (crosslinking of wire and cable insulation, heat shrinkable materials, etc.) and radiation curing of adhesives and coatings on different substrates. The main purpose of the Advisory Group Meeting was to provide a forum for an exchange of information about the new developments in radiation technology, to review the status of these developments and to discuss potential for commercial applications. A further objective was to discuss the role of the International Atomic Energy Agency in promoting new technologies, research and transfer of technology to developing countries. The meeting was expected to prepare recommendations to the Agency for future activities and programmes in this field. Refs, figs and tabs

Methods of computer experiment in gamma-radiation technologies using new radiation sources

CERN Document Server

Bratchenko, M I; Rozhkov, V V

2001-01-01

Presented id the methodology of computer modeling application for physical substantiation of new irradiation technologies and irradiators design work flow. Modeling tasks for irradiation technologies are structured along with computerized methods of their solution and appropriate types of software. Comparative analysis of available packages for Monte-Carlo modeling of electromagnetic processes in media is done concerning their application to irradiation technologies problems. The results of codes approbation and preliminary data on gamma-radiation absorbed dose distributions for nuclides of conventional sources and prospective Europium-based gamma-sources are presented.

Medical applications of synchrotron radiation

International Nuclear Information System (INIS)

Thomlinson, W.

1991-10-01

Ever since the first diagnostic x-ray was done in the United States on February 3, 1896, the application of ionizing radiation to the field of medicine has become increasingly important. Both in clinical medicine and basic research the use of x-rays for diagnostic imaging and radiotherapy is now widespread. Radiography, angiography, CAT and PETT scanning, mammography, and nuclear medicine are all examples of technologies developed to image the human anatomy. In therapeutic applications, both external and internal sources of radiation are applied to the battle against cancer. The development of dedicated synchrotron radiation sources has allowed exciting advances to take place in many of these applications. The new sources provide tunable, high-intensity monochromatic beams over a wide range of energies which can be tailored to specific programmatic needs. This paper surveys those areas of medical research in which synchrotron radiation facilities are actively involved

Medical applications of synchrotron radiation

International Nuclear Information System (INIS)

Thomlinson, W.

1992-01-01

Ever since the first diagnostic X-ray was done in the United States on February 3, 1896, the application of ionizing radiation to the field of medicine has become incrasingly important. Both in clinical medicine and basic research the use of X-rays for diagnostic imaging and radiotherapy is now widespread. Radiography, angiography, CAT and PETT scanning, mammography, and nuclear medicine are all examples of technologies developed to image the human anatomy. In therapeutic applications, both external and internal sources of radiation are applied to the battle against cancer. The development of dedicated synchrotron radiation sources has allowed exciting advances to take place in many of these applications. The new sources provide tunable, high-intensity monochromatic beams over a wide range of energies which can be tailored to specific programmatic needs. This paper surveys those areas of medical research in which synchrotron radiation facilities are actively involved. (orig.)

Single-flux-quantum circuit technology for superconducting radiation detectors

International Nuclear Information System (INIS)

Fujimaki, Akira; Onogi, Masashi; Matsumoto, Tomohiro; Tanaka, Masamitsu; Sekiya, Akito; Hayakawa, Hisao; Yorozu, Shinichi; Terai, Hirotaka; Yoshikawa, Nobuyuki

2003-01-01

We discuss the application of the single-flux-quantum (SFQ) logic circuits to multi superconducting radiation detectors system. The SFQ-based analog-to-digital converters (ADCs) have the advantage in current sensitivity, which can reach less than 10 nA in a well-tuned ADC. We have also developed the design technology of the SFQ circuits. We demonstrate high-speed operation of large-scale integrated circuits such as a 2x2 cross/bar switch, arithmetic logic unit, indicating that our present SFQ technology is applicable to the multi radiation detectors system. (author)

Possibilities of radiation technique application in machine-building industry of Bulgaria

International Nuclear Information System (INIS)

Petrov, A.; Avramov, D.; Kostov, St.

1979-01-01

In last ten years, in development of machine-building industry, tendency has been outlined for creation of machines and constructions having minimum weight and elevated reliability from one side due to improvement of design and technology of production and from the other side due to application of materials with improved parameters. Solution of these problems is closely connected with application of the radiation methods. State-of-art of the radiation technology application in the machine-building industry is analyzed and mainly for investigation of wear resistance of friction machineparts. Use of spatial radioactive labelling in investigation of materials and application of radiation methods for optimization of technological processes in metallurgy, foundry and so on is considered. Estimation is give of perspectives of further growth of introduction of radiation methods in Bulgaria [ru

Development of application technology of radiation-resistant microorganism

International Nuclear Information System (INIS)

Kim, Dong Ho; Lim, Sang Yong; Joe, Min Ho; Jung, Jin Woo; Jung, Sun Wook; Song, Du Sup; Choi, Young Ji

2009-02-01

The scope of the project is divided into of three parts; (i) to define the survival strategy of radiation-resistant microbes, especially Deinococcus (ii) acquisition of gene resources encoding the novel protein and related with the production of functional materials (iii) development of control technology against radiation-resistant microbes. To this aim, first, the whole transcriptional response of the D. radiodurans strain haboring pprI mutation, which plays an important role in radiation resistance, was analyzed by cDNA microarray. The anti-oxidant activity of the major carotenoid of D. radiodurans, deinoxanthin, was analyzed and the strain was constructed, in which the gene necessary for bio- synthesis of deinoxanthin is deleted. The response to cadmium of D. radiodurans was also investigated through cDNA microarray analysis. Radiogenic therapy, one of the cancer treatments, is designed to use radiation-inducible gene for the treatment. To develop the gene-transfer vehicle for radiogenic therapy, we have investigated the virulence mechanism of Salmonella, which is tumor-targeting bacteria and studied the synergistic effect of some anti-cancer agents on radiation treatment for cancer. Finally, we confirmed that irradiation could decompose a fungus toxin, patulin, into various harmless by-products

Development of application technology of radiation-resistant microorganism

Energy Technology Data Exchange (ETDEWEB)

Kim, Dong Ho; Lim, Sang Yong; Joe, Min Ho; Jung, Jin Woo; Jung, Sun Wook; Song, Du Sup; Choi, Young Ji [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2009-02-15

The scope of the project is divided into of three parts; (i) to define the survival strategy of radiation-resistant microbes, especially Deinococcus (ii) acquisition of gene resources encoding the novel protein and related with the production of functional materials (iii) development of control technology against radiation-resistant microbes. To this aim, first, the whole transcriptional response of the D. radiodurans strain haboring pprI mutation, which plays an important role in radiation resistance, was analyzed by cDNA microarray. The anti-oxidant activity of the major carotenoid of D. radiodurans, deinoxanthin, was analyzed and the strain was constructed, in which the gene necessary for bio- synthesis of deinoxanthin is deleted. The response to cadmium of D. radiodurans was also investigated through cDNA microarray analysis. Radiogenic therapy, one of the cancer treatments, is designed to use radiation-inducible gene for the treatment. To develop the gene-transfer vehicle for radiogenic therapy, we have investigated the virulence mechanism of Salmonella, which is tumor-targeting bacteria and studied the synergistic effect of some anti-cancer agents on radiation treatment for cancer. Finally, we confirmed that irradiation could decompose a fungus toxin, patulin, into various harmless by-products.

Overview of radiation effects on emerging non-volatile memory technologies

Directory of Open Access Journals (Sweden)

Fetahović Irfan S.

2017-01-01

Full Text Available In this paper we give an overview of radiation effects in emergent, non-volatile memory technologies. Investigations into radiation hardness of resistive random access memory, ferroelectric random access memory, magneto-resistive random access memory, and phase change memory are presented in cases where these memory devices were subjected to different types of radiation. The obtained results proved high radiation tolerance of studied devices making them good candidates for application in radiation-intensive environments. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. 171007

The current status of agricultural radiation application in Korea

Energy Technology Data Exchange (ETDEWEB)

Chung, Byungyeoup; Kang, Siyong; Lee, Youngkeun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2006-04-15

Since the middle of 1960s agricultural radiation applications have been growing rapidly with a huge resultant influence on the Korea economy. However, most applications used by radiation technologies in agricultural areas are drawn toward to mutation breeding of crops. We have started to research new applications of agricultural areas such as microorganism mutation, mass production of medical compounds, structure modifications of genes/proteins/natural polymers and so on since the late 1990s. In mutation breeding field, around 30 plant cultivars including 16 rice, 6 sesame, 4 hibiscus, 2 soybean, 1 barley and 2 box thorn (=Chinese matrimony vine, Lyci fructus) have been developed by the Korea Atomic Energy Research Institute(KAERI). Now, we are on going to establish new radiation plant breeding technologies with environmental stresses and a high quality in combination with new bio-technologies (e. g. application of tissue culture, in vitro selection, doubled haploids, molecular marker, and gene analysis, etc.) for developing high quality cultivars. The microbial applications of radiation is one of the most attractive R and D in agricultural field because microorganism can be used as a bio-controller which has some advantages such as long term controlling system, decrease in secondary environmental pollution, and tailored microbial pesticide for various crop diseases. According to the advantages as mentioned above, we have made efforts in improving the functions of microbial pesticide (e. g. selection of microorganisms for heavy metal resistant, high decomposition rate of pesticide, and control of plant pathogens etc.) by means of radiation technology. It is a common conception that a certain range of low doses of radiation can elevate the physiological activities of cells in plants and photosynthetic microorganisms, e. g. by accelerating cell proliferation, ameliorating germination and growth rates, increasing stress resistance, and improving crop yields etc. We

The current status of agricultural radiation application in Korea

International Nuclear Information System (INIS)

Chung, Byungyeoup; Kang, Siyong; Lee, Youngkeun

2006-01-01

Since the middle of 1960s agricultural radiation applications have been growing rapidly with a huge resultant influence on the Korea economy. However, most applications used by radiation technologies in agricultural areas are drawn toward to mutation breeding of crops. We have started to research new applications of agricultural areas such as microorganism mutation, mass production of medical compounds, structure modifications of genes/proteins/natural polymers and so on since the late 1990s. In mutation breeding field, around 30 plant cultivars including 16 rice, 6 sesame, 4 hibiscus, 2 soybean, 1 barley and 2 box thorn (=Chinese matrimony vine, Lyci fructus) have been developed by the Korea Atomic Energy Research Institute(KAERI). Now, we are on going to establish new radiation plant breeding technologies with environmental stresses and a high quality in combination with new bio-technologies (e. g. application of tissue culture, in vitro selection, doubled haploids, molecular marker, and gene analysis, etc.) for developing high quality cultivars. The microbial applications of radiation is one of the most attractive R and D in agricultural field because microorganism can be used as a bio-controller which has some advantages such as long term controlling system, decrease in secondary environmental pollution, and tailored microbial pesticide for various crop diseases. According to the advantages as mentioned above, we have made efforts in improving the functions of microbial pesticide (e. g. selection of microorganisms for heavy metal resistant, high decomposition rate of pesticide, and control of plant pathogens etc.) by means of radiation technology. It is a common conception that a certain range of low doses of radiation can elevate the physiological activities of cells in plants and photosynthetic microorganisms, e. g. by accelerating cell proliferation, ameliorating germination and growth rates, increasing stress resistance, and improving crop yields etc. We

New radiation technologies and methods for control of technological processes in metallurgy

International Nuclear Information System (INIS)

Zaykin, Yu.

1996-01-01

Radiation Technology of Metal and Ceramic Production with Enhanced Service Properties. Based on application of radiation technique in powder metallurgy the new technology for obtaining metals, alloys and ceramic materials with high service properties is worked out. Radiation processing of powder materials at the certain stage of the process leads to profound structure alterations at all further stages and eventually effects the properties of the resulting product. Theoretical calculation and experimental studies of electron-positron annihilation in powder-pressed samples showed that irradiation caused powder particles surface state changes favorable for further sintering and crystallization processes development. It is shown that irradiation of metal powders and powder-pressed samples by high energy electrons is technologically most efficient. The right choice of the type-and the mode of the radiation processing makes it possible to obtain metals, alloys and ceramic materials (Mo,Fe, W, Al, Ni, Cu, stainless steels, ceramics, etc.) with homogeneous structure and stable enhanced service properties. The project on radiation technology application to powder metallurgy represented by a group of authors was awarded with the diploma and the gold medal at the 22 International Exhibition of Inventions (Geneva, 1994). New Technologic Opportunities of the Chromium-Nickel Alloys Processing To obtain the required phase-structure state special methods of the chromium-nickel alloy processing for sensitive elastic devices production were worked out combining plastic deformation, thermal and radiation processing. It is shown that h-gbb phase transfer not observed before is possible in extremely non-equilibrium conditions under electron irradiation. It is established that the complex reaction of recrystallization and gb-phase deposition proceeds under electron irradiation at the room temperature when the certain threshold plastic deformation degree is reached that leads to the same

Development of radiation fusion technology with food technology by the application of high dose irradiation

International Nuclear Information System (INIS)

Lee, Juwoon; Kim, Jaehun; Choi, Jongil

2012-04-01

This study was performed to achieve stable food supply and food safety with radiation fusion technology as a preparation for food weaponization. Results at current stage are following: First, for the development of radiation and food engineering fusion technology using high dose irradiation, the effects of high dose irradiation on food components were evaluated. The combination treatment of irradiation with food engineering was developed. Irradiation condition to destroy radiation resistant foodborne bacteria were determined. Second, for the development of E-beam irradiation technology, the effects of radiation sources on food compounds, processing conditions, and food quality of final products were compared. Food processing conditions for agricultural/aquatic products with different radiation sources was developed and the domination of E-beam irradiation foods were determined. The physical marker for E-beam irradiated foods or not was developed. Third, for the fundamental researches to develop purposed foods to extreme environmental, ready-to-eat foods were developed using high dose irradiation. Food processing for export strategy foods such as process ginseng were developed. Food processing with irradiation to destroy mycotoxin and to inhibit production of mycotoxin was developed. Mathematical models to predict necessary irradiation doses and radiation sources were developed and validated. Through the fundamental researches, the legislation for irradiation approval on meat products, sea foods and dried sea foods, and use of E-beam was introduced. Results from this research project, the followings are expected. Improvement of customer acceptance and activation of irradiation technology by the use of various irradiation rays. Increase of indirect food productivity, and decrease of SOC and improvement of public health by prevention of foodborne outbreaks. Build of SPS/TBT system against imported products and acceleration of domestic product export. Systemized

Development of Radiation Fusion Technology with Food Technology by the Application of High Dose Irradiation

International Nuclear Information System (INIS)

Kim, Ju Won; Kim, Jae Hun; Choi, Jong Il

2010-04-01

This study was studied to achieve stable food supply and food safety with radiation fusion technology as a preparation for food weaponization. Results at current stage are following: First, for the development of radiation and food engineering fusion technology using high dose irradiation, the effects of high dose irradiation on food components were evaluated. The combination treatment of irradiation with food engineering were developed. Irradiation condition to destroy radiation resistant food borne bacteria were determined. Second, for the development of E-beam irradiation technology, the effects of radiation sources on food compounds, processing conditions, and food quality of final products were compared. Food processing conditions for agricultural/aquatic products with different radiation sources were developed and the domination of E-beam irradiation foods were determined. The physical marker for E-beam irradiated foods or not were developed. Third, for the fundamental researches to develop purposed foods to extreme environmental, ready-to-eat foods were developed using high dose irradiation. Food processing for export strategy foods such as process ginseng were developed. Food processing with irradiation to destroy mycotoxin and to inhibit production of mycotoxin were developed. Mathematical models to predict necessary irradiation doses and radiation sources were developed and validated. Through the fundamental researches, the legislation for irradiation approval on meat products, sea foods and dried sea foods, and use of E-beam were introduced. Results from this research project, the followings are expected. (1) Improvement of customer acceptance and activation of irradiation technology by the use of various irradiation rays. (2) Increase of indirect food productivity, and decrease of SOC and improvement of public health by prevention of food borne outbreaks. (3) Build of SPS/TBT system against imported products and acceleration of domestic product export

Development of Radiation Fusion Technology with Food Technology by the Application of High Dose Irradiation

Energy Technology Data Exchange (ETDEWEB)

Kim, Ju Won; Kim, Jae Hun; Choi, Jong Il

2010-04-15

This study was studied to achieve stable food supply and food safety with radiation fusion technology as a preparation for food weaponization. Results at current stage are following: First, for the development of radiation and food engineering fusion technology using high dose irradiation, the effects of high dose irradiation on food components were evaluated. The combination treatment of irradiation with food engineering were developed. Irradiation condition to destroy radiation resistant food borne bacteria were determined. Second, for the development of E-beam irradiation technology, the effects of radiation sources on food compounds, processing conditions, and food quality of final products were compared. Food processing conditions for agricultural/aquatic products with different radiation sources were developed and the domination of E-beam irradiation foods were determined. The physical marker for E-beam irradiated foods or not were developed. Third, for the fundamental researches to develop purposed foods to extreme environmental, ready-to-eat foods were developed using high dose irradiation. Food processing for export strategy foods such as process ginseng were developed. Food processing with irradiation to destroy mycotoxin and to inhibit production of mycotoxin were developed. Mathematical models to predict necessary irradiation doses and radiation sources were developed and validated. Through the fundamental researches, the legislation for irradiation approval on meat products, sea foods and dried sea foods, and use of E-beam were introduced. Results from this research project, the followings are expected. (1) Improvement of customer acceptance and activation of irradiation technology by the use of various irradiation rays. (2) Increase of indirect food productivity, and decrease of SOC and improvement of public health by prevention of food borne outbreaks. (3) Build of SPS/TBT system against imported products and acceleration of domestic product export

Development of radiation fusion technology with food technology by the application of high dose irradiation

Energy Technology Data Exchange (ETDEWEB)

Lee, Juwoon; Kim, Jaehun; Choi, Jongil; and others

2012-04-15

This study was performed to achieve stable food supply and food safety with radiation fusion technology as a preparation for food weaponization. Results at current stage are following: First, for the development of radiation and food engineering fusion technology using high dose irradiation, the effects of high dose irradiation on food components were evaluated. The combination treatment of irradiation with food engineering was developed. Irradiation condition to destroy radiation resistant foodborne bacteria were determined. Second, for the development of E-beam irradiation technology, the effects of radiation sources on food compounds, processing conditions, and food quality of final products were compared. Food processing conditions for agricultural/aquatic products with different radiation sources was developed and the domination of E-beam irradiation foods were determined. The physical marker for E-beam irradiated foods or not was developed. Third, for the fundamental researches to develop purposed foods to extreme environmental, ready-to-eat foods were developed using high dose irradiation. Food processing for export strategy foods such as process ginseng were developed. Food processing with irradiation to destroy mycotoxin and to inhibit production of mycotoxin was developed. Mathematical models to predict necessary irradiation doses and radiation sources were developed and validated. Through the fundamental researches, the legislation for irradiation approval on meat products, sea foods and dried sea foods, and use of E-beam was introduced. Results from this research project, the followings are expected. Improvement of customer acceptance and activation of irradiation technology by the use of various irradiation rays. Increase of indirect food productivity, and decrease of SOC and improvement of public health by prevention of foodborne outbreaks. Build of SPS/TBT system against imported products and acceleration of domestic product export. Systemized

Radiation processing technology in the 21st century

International Nuclear Information System (INIS)

Miyuki Hagiwara

1997-01-01

The address discusses the following issue - towards the 21st century, we are required more and more to create innovative technologies to solve problems about environment, energy, natural resources, materials, health care, food and others which are the great concern to human beings. For the radiation processing technology to survive, it will be required to provide answers to those problems. The use of radiation of polymer modification will remain as an important field of the radiation application. Some other promising polymer processing can be cited as those which will grow in near future; for environment technology - polymeric fibers grafted with ion exchange residues to remove toxic metals for cleaning industrial waste water; For health care technology - crosslinked polyvinylalcohol hydrogel for wound dressing (irradiation of hydrogel); For high performance materials technology - less toxic crosslinked natural rubber latex (irradiation of emulsion), abrasion resistant crosslinked PTFE (irradiation at high temperature)

Modern gas-avalanche radiation detectors: from innovations to applications

International Nuclear Information System (INIS)

2013-01-01

Micro-Pattern Gaseous Detectors (MPGD) technologies allow for the conception of advanced large area radiation detectors with unprecedented spatial resolutions and sensitivities, capable of operating under very high radiation flux. After more than two decades of extensive R and D carried by large number of groups worldwide, these detector technologies have reached high level of maturity. Nowadays, they are adapted as leading instruments for a growing number of applications in particle physics and in many other fields on basic and applied research. The growing interest in MPGD technologies and their mass-production capabilities naturally motivates further developments in the field. The state-of-the-art detector concepts and technologies have been introduced and their evolution, properties and current leading applications have been reviewed. Future potential applications as well as new technology challenges have been discussed

6. Seminar of the IIE-ININ-IMP on technological specialties. Topic 10: industrial applications of radiation and control

International Nuclear Information System (INIS)

1992-01-01

The document includes 7 papers presented at the 6. Seminar of the IIE-ININ-IMP (Mexico) on technological specialties in the field of industrial applications of radiation and control. (Topic 10). A separate abstract was prepared for each paper

Vacuum science, technology, and applications

CERN Document Server

Naik, Pramod K

2018-01-01

Vacuum plays an important role in science and technology. The study of interaction of charged particles, neutrals and radiation with each other and with solid surfaces requires a vacuum environment for reliable investigations. Vacuum has contributed immensely to advancements made in nuclear science, space, metallurgy, electrical/electronic technology, chemical engineering, transportation, robotics and many other fields. This book is intended to assist students, scientists, technicians and engineers to understand the basics of vacuum science and technology for application in their projects. The fundamental theories, concepts, devices, applications, and key inventions are discussed.

Radioisotopes and radiation technology

International Nuclear Information System (INIS)

Ramamoorthy, N.

2011-01-01

The field of radioisotopes and radiation processing has grown enormously all over the world with India being no exception. The chemistry and radiochemistry related inputs to the overall technology development and achievements have been, and will continue to be, of considerable value and importance in this multi-disciplinary and multi-specialty field. Harnessing further benefits as well as sustaining proven applications should be the goal in planning for the future. An objective analysis of the socio-economic impact and benefits from this field to the society at large will undoubtedly justify assigning continued high priority, and providing adequate resources and support, to relevant new projects and programmes on the anvil in the area of radioisotopes and radiation technology. It is necessary to nurture and strengthen inter-disciplinary and multi-specialty collaborations and cooperation - at both national and international level as a rule (not as exception) - for greater efficiency, cost-effectiveness and success of ongoing endeavors and future developments in this important field

Economical scale of radiation applications in Japan

International Nuclear Information System (INIS)

Yanagisawa, Kazuaki; Kume, Tamikazu; Makuuchi, Keizo; Takeshita, Hidefumi

2000-01-01

As a scale to quantify actual state of a thing, person, material and money are used in general, and money or economical scale has been frequently investigated on radiation application. As some investigations on annual sales (economical scale) of tire for car and germination protection of tomato had been tried to estimate in Japan, they were carried out only partially but not in general. On the other hand, in U.S.A. some general investigations were carried out, to report 421 billion dollars for nuclear energy application where its 80% was occupied by radiation application and remained 20 % was energy application (electricity). Therefore, JAERI established a special group (radiation frontier research group) aiming to investigate economical scale of radiation application in Japan to industrial, agricultural and medical field in general under cooperation of universities and private companies by receiving trust of the Science and Technology Agency. Here were described on basic concept on the investigation, its results, and total image on economical scale of radiation application and its comparison with that of energy application. (G.K.)

Microtron for radiation applications

International Nuclear Information System (INIS)

Soni, H.C.; Ramamurthi, S.S.

1993-01-01

The electron accelerator called microtron is a powerful tool for research, medical and industrial applications which need electron beam in energy range of few tens of MeV. Either electron beam from microtron is directly used for radiation applications or electron beam is utilized to produce x-rays or neutrons which are eventually used for radiation applications. After considering the vast potential, lower cost, simpler construction and excellent quality of electron beam from microtron, it was decided to develop this machine at Centre for Advanced Technology (CAT). The microtrons in two standard models have been developed which will cover all the above mentioned applications except free electron lasers. The microtron of model 1 provides electron beam of 20 MeV, 15/30 mA and that of model 2 provides electron beam of 8/12 MeV, 50/30 mA. (author). 2 figs., 1 tab

The application of computer and automatic technology in dose measurement of neutron radiation

International Nuclear Information System (INIS)

Zhou Yu; Li Chenglin; Luo Yisheng; Guo Yong; Chen Di; Xiaojiang

1999-01-01

Generally the dose measurement of neutron radiation requires three electrometers, two bias, three workers in the same time. To improve the accuracy and efficiency of measurement, a Model 6517A electrometer that accommodate Model 6521 scanner cards and a portable computer are used to make up of a automatic measurement system. Corresponding software is developed and used to control it. Because of the application of computer and automatic technology, this system can not only measure dose rate automatically, but also make data's calculating, saving, querying, printing and comparing ease

Role of BRIT in promoting radiation processing technology in India

International Nuclear Information System (INIS)

Bandi, L.N.

2014-01-01

Some of the major applications of radiation processing include: the sterilization of products such as medical devices to kill bacteria or in the case of food, hygienize the product; the treatment of export bulk commodities such as tropical fruits to extend shelf life by slowing the ripening process and inhibiting sprouting and to kill quarantine pests such as fruit flies. Radiation processing is a value addition process. Taking note of these benefits, Department of Atomic Energy, Government of India constituted Board of Radiation and Isotope Technology (BRIT) in March 1989 by carving it out from Bhabha Atomic Research Centre, Mumbai. The mandate given to BRIT was to extend commercial applications of radioisotopes and radiation in the areas of Health, Agriculture, Industry and Research without losing sight of societal obligations. So far Department of Atomic Energy has set up three demonstration plants, namely, Isomed, RPP, Vashi and Krushak for high, medium and low dose applications of radiation respectively. The safe and business like operation of these facilities amply demonstrated the embedded safety and commercial viability of this technology

Radiation technology for conservation of the environment. Proceedings of a symposium

International Nuclear Information System (INIS)

1998-06-01

In September 1997 the IAEA held an International Symposium in Zakopane, Poland, on the applications of radiation technology in conservation of environment. The symposium attended 110 participants representing 38 Member States. The objective was to review the status of current developments and applications of radiation processing in the control of environment pollution and to discuss future developments. The scientific programme covered a wide range of different applications of radiation technology, such as purification of exhaust gases, decontamination of wastewater from industrial and municipal sources, sewage sludge treatment, disinfection and detoxication of solid waste, recycling and the treatment of plastic and solid waste. The document contains full presentations. The symposium (56 papers) was held in 10 sessions as follows: Purification of Exhaust Gases (8 papers); Radiation Chemistry and the Environment (5 papers); Purification and Decontamination of Water (10 papers); Sewage Sludge Treatment (6 papers); Biomedical Applications (5 papers); Recycling and Treatment of Plastic and Solid Wastes (4 papers); Facilities (4 papers); Quality Assurance, Quality Control (4 papers); Transfer of Technology through Technical Co-Operation (5 papers); Curing, Cross-Linking and Grafting (5 papers). A separate abstract and indexing were provided for each paper

Radiation technology for conservation of the environment. Proceedings of a symposium

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-06-01

In September 1997 the IAEA held an International Symposium in Zakopane, Poland, on the applications of radiation technology in conservation of environment. The symposium attended 110 participants representing 38 Member States. The objective was to review the status of current developments and applications of radiation processing in the control of environment pollution and to discuss future developments. The scientific programme covered a wide range of different applications of radiation technology, such as purification of exhaust gases, decontamination of wastewater from industrial and municipal sources, sewage sludge treatment, disinfection and detoxication of solid waste, recycling and the treatment of plastic and solid waste. The document contains full presentations. The symposium (56 papers) was held in 10 sessions as follows: Purification of Exhaust Gases (8 papers); Radiation Chemistry and the Environment (5 papers); Purification and Decontamination of Water (10 papers); Sewage Sludge Treatment (6 papers); Biomedical Applications (5 papers); Recycling and Treatment of Plastic and Solid Wastes (4 papers); Facilities (4 papers); Quality Assurance, Quality Control (4 papers); Transfer of Technology through Technical Co-Operation (5 papers); Curing, Cross-Linking and Grafting (5 papers). A separate abstract and indexing were provided for each paper Refs, figs, tabs

Regulation for radiation protection in applications of radiation sources

International Nuclear Information System (INIS)

Sonawane, Avinash U.

2016-01-01

Applications of ionising radiation in multifarious field are increasing in the country for the societal benefits. The national regulatory body ensures safety and security of radiation sources by enforcing provisions in the national law and other relevant rules issued under the principle law. In addition, the enforcement of detailed requirements contained in practice specific safety codes and standard and issuance of safety directives brings effectiveness in ensuring safe handling and secure management of radiation sources. The regulatory requirements for control over radiation sources throughout their life-cycle have evolved over the years from experience gained. Nevertheless, some of the regulatory activities which require special attention have been identified such as the development of regulation to deal with advance emerging radiation technology in applications of radiation in medicine and industry; sustaining continuity in ensuring human resource development programme; inspections of category 3 and 4 disused sources and their safe disposal; measures for controlling transboundary movement of radiation sources. The regulatory measures have been contemplated and are being enforced to deal with the above issues in an effective manner. The complete involvement of the management of radiation facilities, radiation workers and their commitment in establishing and maintaining safety and security culture is essential to handle the radiation sources safely and efficiently at all times

Application of laser cutting technology to high radiation environments

International Nuclear Information System (INIS)

Pauley, K.A.; Mitchell, M.R.; Saget, S.N.

1996-01-01

A 2 kW Nd:YAG laser system manufactured by the Lumonics Corporation will be used to cut various metals during the fall of 1996 as part of a United States Department of Energy (DOE)-funded technology demonstration at the Hanford Site. The laser cutting demonstration will focus on an evaluation of two issues as the technology applies to the decontamination and decommissioning (D ampersand D) of aging nuclear facilities. An assessment will be made as to the ability of laser end effectors to be operated using electromechanical remote manipulators and the ability of both end effector and fiber optics to withstand the damage created by a high radiation field. The laser cutting demonstration will be conducted in two phases. The first phase will be a non-radioactive test to ensure the ability of hot cell remote manipulators to use the laser end effector to successfully cut the types of materials and geometries found in the hot cell. The second phase will introduce the laser end effector and the associated fiber optic cable into the hot cell radiation environment. The testing in the hot cell will investigate the degradation of the optical portions of the end effector and transmission cable in the high radiation field. The objective of the demonstration is to assess the cutting efficiency and life limitations of a laser cutting system for radioactive D ampersand D operations. A successful demonstration will, therefore, allow the laser cutting technology to be integrated into the baseline planning for the D ampersand D of DOE facilities throughout the nation

Studies on the Promotion of Biological Application by Radiation

International Nuclear Information System (INIS)

No, Y. C.; Kuk, I. H.; Song, H. S.

2006-03-01

Radiation Technology (RT) has been widely used in most of all fields of industries, medical, bioresources, food and agriculture, public hygiene, and environment. Therefore, its application has been also researched in various parts. For industrialization of the developed technology, not only the application technology will be developed, but the accurate dosimetry and improvement of the services of irradiation practice should be performed as soon as possible. Evaluation of effects and reaction mechanism of biological materials by irradiation was performed in this year in the long term research planning. The researches and experiments were well performed and the good results were obtained. The results may be donated in the progress of radiation biology and the new establishment on the application of RT. Also, one of the results was the evaluation of the structural changes of biomolecules and its application in the fields of food and biotechnology industries. Advanced Radiation Technology Institute (ARTI) will be well settled down and promotion of research activity of newly established institute by the fundamental support of KAERI. And, ARTI can get the goal where the vision of the hub of RT in Asia/Pacific region by 2020

Applications of radiation processing: SRI experiences

International Nuclear Information System (INIS)

Rajput, Sanjay

2014-01-01

Shriram Applied Radiation Centre (SARC) is a part of Shriram Institute for Industrial Research (SRI), and was established in 1986, in collaboration with Bhabha Atomic Research Centre (BARC), Board of Radiation and Isotope Technology (BRIT), Department of Atomic Energy (DAE), Atomic Energy Regulatory Board (AERB). SARC was established with a objective to popularize the radiation processing technology for various applications. SARC is a fully automatic, computerized plant setup as per the design and norms of BRIT/AERB for round the clock fail safe operations. The capacity of SARC Irradiator is 800 kCi of Cobalt -60 source which can process up to 10,000 cubic meters of material (0.1g/cc) at 25 kGy level

Progress report of the Radiation Technology and Industrial Applications Section, Isotope Group for the period ending August 1977

International Nuclear Information System (INIS)

Naik, A.D.; Roy, A.N.; Majali, A.B.

1977-01-01

The activities of the Radiation Technology and Industrial Applications Section of the Bhabha Atomic Research Centre, Bombay, for the period ending August 1977 are reported. Major highlights are: (1) completion of studies and design engineering for an economic scale cobalt-60 based irradiator for the radiation sterilisation of medical products, (2) taking up the work of setting up the cobalt-60 irradiation facilities for sources up to 300,000 Ci level, (3) development of radiation processed wood-polymer composite and practical demonstration of its superiority for application in industries - a cobalt-60 facility specifically for this purpose is being installed, (4) development of a commercially viable design of a smoke alarm system based on radioisotopes and (5) production and supply of irradiation units such as gamma chambers, radiography cameras, etc. (M.G.B.)

Application of Radiation in Nanotechnology

International Nuclear Information System (INIS)

Chmielewska, D.K.; Chmielewski, A.G.; Michalik, J.

2005-01-01

The Nanotechnology is one of the fastest growing new areas in science and engineering. The subject arises from the convergence of electronics, physics, chemistry, biology and materials science to create new functional systems of nano-scale dimensions. Nanotechnology deals with science and technology associated with dimensions in the range of 0.1 to 100 nm. The ability to fabricate structures with nano-metric precision is of fundamental importance to any exploitation of nanotechnology. Nanotechnology is predicted to have a major impact on the manufacturing technology in 20 to 30 years from now. The ability to fabricate structures with nano-metric precision is of fundamental importance to any exploitation of nanotechnology. The potential of combining radiation effects with nano-materials has been recognized from the very early stages of nano-science research. In the many uses of nano- structures, and nano-particles in particular, from catalysis, bio-sensing, nano-electronics, magnetic applications including separations, mechano-chemical conversion, and to molecular computing, radiation can play a significant role. The use of radiation, UV beam, electron-beam, or focused ion-beam is clearly central to the fabrication of the nanostructured systems. The relative advantages and deficiencies of each of them are still to be clarified as the technology advances. Whether UV or electron beam will lead to the highest resolution is still debated but it is clear that these techniques offer unmatched reproducibility and very narrow size distribution. Other studies concern formation and synthesis of nano-particles and nano-composites. Radiation synthesis of copper, silver and other metals' nanoparticles is studied. Metal and salt-polymer composites are synthesized by this method. Metal sulphide semiconductors of nano-metric matrices are prepared using gamma irradiation of a suitable solution of monomer, sulphur and metal sources. These products find application in photoluminescent

Fundamental Technology Development for Radiation Damage in Nuclear Materials

International Nuclear Information System (INIS)

Kwon, Sang Chul; Kwon, J. H.; Kim, E. S. and others

2005-04-01

This project was performed to achieve technologies for the evaluation of radiation effects at materials irradiated at HANARO and nuclear power plants, to establish measurement equipment and software for the analysis of radiation defects and to set up facilities for the measurements of radiation damage with non-destructive methods. Major targets were 1) establishment of hot laboratories and remote handling facilities/ technologies for the radioactive material tests, 2) irradiation test for the simulation of nuclear power plant environment and measurement/calculation of physical radiation damage, 3) evaluation and analysis of nano-scale radiation damage, 4) evaluation of radiation embrittlement with ultrasonic resonance spectrum measurement and electromagnetic measurement and 5) basic research of radiation embrittlement and radiation damage mechanism. Through the performance of 3 years, preliminary basics were established for the application research to evaluation of irradiated materials of present nuclear power plants and GEN-IV systems. Particularly the results of SANS, PAS and TEM analyses were the first output in Korea. And computer simulations of radiation damage were tried for the first time in Korea. The technologies will be developed for the design of GEN-IV material

Synchrotron radiation and prospects of its applications

Energy Technology Data Exchange (ETDEWEB)

Kulipanov, G; Skrinskii, A

1981-04-01

Current and prospective applications are described of synchrotron radiation resulting from the motion of high-energy electrons or positrons in a magnetic field and covering a wide spectral range from the infrared to X-ray. The advantages of the synchrotron radiation include a big source luminance, a small angular divergence, the possibility of calculating the absolute intensity and the spectral distribution of the radiation. Special storage rings are most suitable as a source. Synchrotron radiation is applied in X-ray microscopy, energy diffractometry, atomic and molecular spectroscopy, in the structural analysis of microcrystals, very rapid diffractometry of biological objects and crystals, and in Moessbauer spectroscopy. The prospective applications include uses in metrology, medicine, X-ray lithography, elemental analysis, molecular microsurgery, and in radiation technology.

Radiation processing technology for industrial waste water treatment

International Nuclear Information System (INIS)

2011-01-01

Radiation sterilization technology, cross-linked polymers and curing, food and environmental applications of the radiation is widely used for many years. At the same time, drinking water and wastewater treatment are the part of the radiation technology applications. For this purpose, drinking water and wastewater treatment plants in various countries has been established. In this project, gamma / electron beam radiation treatment is intended to be used for the treatment of alkaloid, textiles and polychlorinated biphenyls (PCBs) wastewater. In this regard, the chemical characterization of wastewater, the interaction with radiation, biological treatment and determination of toxicological properties are the laboratory studies milestones. After laboratory studies, the establishment of a pilot scale treatment plant has been planned. Within the framework of the project a series of dye used in textile industry were examined. Besides the irradiation, the changes in treatment efficiency were investigated by using of oxygen and hydrogen peroxide in conjunction with the irradiation. Same working methods were implemented in the wastewater treatment of Bolvadin Opium Alkaloid Factory as well. In addition to chemical analysis in this study, aerobic and anaerobic biological treatment process also have been applied. Standard reference materials has been used for the marine sediment study contaminated with polychlorinated biphenyls.

Current status of the radiation technology and quality control for radiation processing in Latin America

International Nuclear Information System (INIS)

Miranda, Enrique Francisco Prietro

2013-01-01

The use of the radiation technology has gained acceptance in various regions of the world, where studies estimated that the installed capacity increases at a rate of 6 % per year and Latin America is part of this increase, due the advantages of this process when it is employed for the food preservation, sterilization of medical pharmaceutical material and to control the insect pests. This paper shows the art state of the application of Radiation Technology in Latin America, as well as the technological characteristics of the most gamma irradiation facilities and minor number the electron beam accelerator facilities, the types of irradiated products, state of the Quality Management System and the Dosimetric Systems used in the Radiation Processing Control in the Region. (author)

Applications of Radiation Processing in Industry

International Nuclear Information System (INIS)

Abad, Lucille V.

2015-01-01

Radiation processing has long been known as commercially viable technology that can be beneficially used to enhance the characteristics of many materials. Several gamma irradiators and electron beam accelerators are operating worldwide which are utilized for various established industrial applications. These could be used for the following processes: a) radiation crosslinking e.g. crosslinking of wires and cables, heat shrinkable film and tube productions, manufacture of plastic bags and tubings for medical products, pre-curing of automobile tire components, curing of polymeric coatings, etc. b) radiation degradation e.g. Scrap Teflon (Polytetraflouroethylene) to form powders, disinfestations and pasteurization of agricultural products, sterilization of medical products, etc.; and c) radiation grafting e.g. grafted non-woven fabrics for metal adsorbent. Emerging applications for radiation processing include grafted membranes for fuel cell, electrodes, cell sheet for tissue engineering, nanoparticle production, polymer composite synthesis, and fibrous catalyst for biodiesel production. Current researches at the Philippine Nuclear Research Institute consist of crosslinking of natural and synthetic polymers for medical application e.g. wound dressing, hemostats, and bioimplants for vesicouretal reflux (VUR); grafting of natural and synthetic fabrics for metal adsorbents; and radiation degradation of carrageenan as plant growth promoter. (author)

Radiation effects in semiconductors: technologies for hardened integrated circuits

International Nuclear Information System (INIS)

Charlot, J.M.

1984-01-01

Various technologies are used to manufacture integrated circuits for electronic systems. But for specific applications, including those with radiation environment, it is necessary to choose an appropriate technology or to improve a specific one in order to reach a definite hardening level. The aim of this paper is to present the main effects induced by radiation (neutrons and gamma rays) into the basic semiconductor devices, to explain some physical degradation mechanisms and to propose solutions for hardened integrated circuit fabrication. The analysis involves essentially the monolithic structure of the integrated circuits and the isolation technology of active elements. In conclusion, the advantages of EPIC and SOS technologies are described and the potentialities of new technologies (GaAs and SOI) are presented. (author)

Isotopes and radiation technology - Indian scene

International Nuclear Information System (INIS)

Rao, S.M.

1996-01-01

India's isotope programme is today largely self-sustaining both in terms of availability of isotope products and the range of their applications in medicine, industry, hydrology, agriculture and research. Nuclear medicine is practised by over 200 medical institutions whereas 300 organisations offer radioimmunoassay service. Tracer technology, nucleonic gauging and isotope radiography are fairly well accepted by the Indian industry for troubleshooting, NDT and process control. There are three large radiation plants for sterilisation of medical products. Radiation chemical processing with both gamma and EB shows good promise. In agriculture, sixteen mutants of various crops have been produced using gamma-radiation and distributed for commercial cultivation. A strong programme of research on radiation preservation of food has finally resulted in the clearance of some irradiated foods by the Government of India. (author). 20 refs., 2 tabs

Current status of utilization of radioisotopes and radiation technology in Malaysia

International Nuclear Information System (INIS)

Ahmad Tajuddin Ali

1985-01-01

The utilization of isotope and radiation technology in Malaysia dates back to the early sixties. However it was confined to the field of medicine. Today, the use of this technology has widen up, covering the agricultural and industrial areas. The increasing use of the technology has prompted the government to establish the Nuclear Energy Unit whose one of its main functions is to ensure the safe application of radioisotopes and radiations. For this purpose, facilities for training, calibration, waste treatment, etc. were provided by this unit to cater the need of radioisotope and radiation users throughout the country. (author)

Use of radiation processing technology gradually expands in industry

International Nuclear Information System (INIS)

Anon.

1989-01-01

The use of radioisotopes and radiation is expanding in the fields of industries and medicine with a high potentiality of the application to environmental protection. The technology transfer on the use of isotopes and radiation is progressing in the framework of international cooperation. But the industry has maintained wait and see attitude on the commercialization of food irradiation. Such present features were the highlight in the 19th Japan Conference on Radiation and Radioisotopes held on November 14-16. 72 papers from 19 countries were presented and discussed in 13 sessions. The progress of accelerator technology has contributed to the expansion of radiation processing market. The importance of the application of isotopes and radiation to environmental protection has been gradually acknowledged, and the electron beam treatment of flue gas for acid rain abatement and the elimination of chlorinated ethylene from drinking water were discussed. Drastic change has not been seen in the climate of food irradiation, however there are several positive indicators which support the prediction of slow but steady progress in the commercialization of the process and the trade of irradiated foods. (K.I.)

The application of radiation technology in the field of medical biomaterials

International Nuclear Information System (INIS)

Jin Huanyu; An Yan; Yin Hua

2011-01-01

The radiation technology has been applied extensively in the fields of biological engineering, tissue engineering, medical industry and so on. It also plays an important role in the sterilization and modification of biomaterials. This work reviews the development of irradiation technology and absorbed doses for the sterilization and modification of medical biomaterials. (authors)

New developments and trends in radiation chemistry applications

International Nuclear Information System (INIS)

Gueven, O.

2002-01-01

Complete text of publication follows. This paper attempts to review the recent developments in the application of ionizing radiation in various industrial processes. Modification of structure and properties of polymeric materials of both synthetic and natural origin has been the leading field benefiting from unique advantages of high-energy radiation. The developments recently achieved in this highly industries area includes polymer composite production, micro-device production, surface curing and modification, preparation of membranes, adsorbents, controlled degradation, recycling of plastics. Health-care industries continue to benefit from radiation technology in the production of health-care aids, decontamination and sterilization of pharmaceuticals in addition to well-accepted sterilization of implants and single-use medical devices. Radiation processing continues to find growing use in mitigating environmental problems ranging from removal of persistent organic pollutants from gaseous and aqueous effluents to destruction of biohazardous compounds. Some of the new technological innovations and R and D activities in above-mentioned applications will be briefly described

Conference Proceedings of RADTECH ASIA '99. Radiation Curing: the technology for the next millenium

International Nuclear Information System (INIS)

1999-01-01

Radiation curing (i.e. ultraviolet radiation, electron beams, etc) technology were discussed. All aspects of this technology included equipment , applications, chemistry, performance characterization and measurement, market and economic, new breakthrough were discussed and presented in details

Conference Proceedings of RADTECH ASIA '99. Radiation Curing: the technology for the next millenium

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

Radiation curing (i.e. ultraviolet radiation, electron beams, etc) technology were discussed. All aspects of this technology included equipment , applications, chemistry, performance characterization and measurement, market and economic, new breakthrough were discussed and presented in details.

Technical basis of radiation therapy. Practical clinical applications. 5. ed.

Energy Technology Data Exchange (ETDEWEB)

Levitt, Seymour H. [Karolinska Institutet Stockholm (Sweden). Dept. of Oncol-Pathol; Perez, Carlos A. [Washington Univ. Medical Center, St. Louis, MO (United States). Dept. of Radiation Oncology; Purdy, James A. [California Univ., Sacramento, CA (United States). Dept. of Radiation Oncology; Poortmans, Philip [Institute Verbeeten, Tilburg (Netherlands). Dept. of Radiation Oncology

2012-07-01

This well-received book, now in its fifth edition, is unique in providing a detailed description of the technological basis of radiation therapy. Another novel feature is the collaborative writing of the chapters by North American and European authors. This considerably broadens the book's perspective and increases its applicability in daily practice throughout the world. The book is divided into two sections. The first covers basic concepts in treatment planning, including essential physics and biological principles related to time-dose-fractionation, and explains the various technological approaches to radiation therapy, such as intensity-modulated radiation therapy, tomotherapy, stereotactic radiotherapy, and high and low dose rate brachytherapy. Issues relating to quality assurance, technology assessment, and cost-benefit analysis are also reviewed. The second part of the book discusses in depth the practical clinical applications of the different radiation therapy techniques in a wide range of cancer sites. All of the chapters have been written by leaders in the field. This book will serve to instruct and acquaint teachers, students, and practitioners in the various fields of oncology with the basic technological factors and approaches in radiation therapy. (orig.)

Emerging applications of radiation in nanotechnology. Proceedings of a consultants meeting

International Nuclear Information System (INIS)

2005-03-01

Nanotechnology is one of the fastest growing areas in science and engineering, for synthesis of nanoparticles and nanocomposites with improved characteristics. Radiation-based technology using X rays, e-beams and ion beams is the key to a variety of different approaches to micropatterning. Radiation processed nanomaterials with high abrasion and high scratch resistance or biomedical usage (controlled release drug delivery systems) are of increasing importance. The ability to fabricate structures with nanometric precision is fundamental to any exploitation of nanotechnology. The report covers selected developments in nanotechnology and on this basis presents the potential role of radiation applications in the field. It is the first publication on radiation applications in nanotechnology and therefore will play an important role in stimulating further research on the subject. The main topics reported and discussed are recent trends in nanotechnology, fundamental issues in the effects of radiation on nanostructures, fabrication of nanostructures using radiation, technological applications including electron, ion beam and X ray lithography, polymeric nanostructures and nanoparticle reinforced polymers

Industrial applications of electron beam technology

International Nuclear Information System (INIS)

Khairul Zaman Mohd Dahlan

1997-01-01

Electron beam technology was first introduced in Malaysia in 1989 with the conclusion of the bilateral cooperation between the Malaysian Institute for Nuclear Technology Research (MINT) and Japan International Co-operation Agency (JICA) on Radiation Application Projects. Two electron beam accelerators with energy of 3.0 MeV and 200 keV were installed at MINT. These two accelerators pave the way for R and D to be carried out in radiation processing of polymers for cross-linking and surface curing. In 1994, another electron beam accelerator was installed in the private sector for cross-linking of home appliance wires. Since then, two more accelerators were installed in the private sector for cross-linking of heat shrinkable plastic films. Recently, a local company has acquired a low energy electron beam machine for cross-linking of plastic film. Within a period of 7 years, industrial applications of electron beam technology in Malaysia have increased significantly

Radiation effects in semiconductors: technologies for hardened integrated circuits

International Nuclear Information System (INIS)

Charlot, J.M.

1983-09-01

Various technologies are used to manufacture integrated circuits for electronic systems. But for specific applications, including those with radiation environment, it is necessary to choose an appropriate technologie or to improve a specific one in order to reach a definite hardening level. The aim of this paper is to present the main effects induced by radiation (neutrons and gamma rays) into the basic semiconductor devices, to explain some physical degradation mechanisms and to propose solutions for hardened integrated circuit fabrication. The analysis involves essentially the monolithic structure of the integrated circuits and the isolation technology of active elements. In conclusion, the advantages of EPIC and SOS technologies are described and the potentialities of new technologies (GaAs and SOI) are presented

Application of radiation in industrial processes (Paper No. IT-01)

International Nuclear Information System (INIS)

Murthy, T.S.

1990-02-01

The application of radiations both from gamma irradiation sources and electron beams has immense potential in diverse fields of industry and public health care programmes. The technical and economic effectiveness of radiation technology has been well demonstrated in different parts of the world and in India over last few years. The major applications for using this technology favourably considered all over the world include radiation sterilisation of medical products, hygienisation of sewage sludge, radiation processing of wood plastic composites, vulcanisation of natural rubber latex, cross linking of wires and cables using radiation, production of bio materials and drugs release systems and treatment of flue gases. Some of the areas which have been successfully exploited on an industrial or semi industrial scale in India and the current status of this programme is high lighted in this paper. (author). 9 refs

Ionizing radiations in aseptic bottling: a comparison between technologies and safety requirements [beverages

International Nuclear Information System (INIS)

Bottani, E.; Rizzo, R.; Vignali, G.

2006-01-01

Ionizing radiations, commonly adopted in the medical field, are recently experiencing a wide diffusion in industrials applications. One of the most widespread uses of ionizing radiations refers to foodstuffs and packaging sterilization. In the aseptic bottling area, the application of this technology on polymeric caps is quickly developing. In such application, sterilization could be obtained with beta-rays, generated by an electron beam, or with gamma-rays, emitted by a radioactive source. After a brief explanation of physical properties of ionizing radiations, the aim of this paper is to discuss the use of radiations in aseptic bottling. Based on results available in literature, radiations effects on treated materials are discussed, as well as safety requirements aiming at reducing risks related to radiation exposure. Finally, sterilization plants with gamma and beta radiation are compared, with the aim of examining functioning principles and management complexity. As a result of the comparison between the two technologies, the electron beam (beta-rays) adoption for caps sterilization process proves to be preferable [it

Development of environmental radiation control technology

International Nuclear Information System (INIS)

Han, M. H.; Kim, E. H.; Keum, D. K.; Kang, M. J.; Jang, B. W.

2010-04-01

The objectives of the study are to development of an urban atmospheric dispersion model and data assimilation technique for improving the reliability, to develop the technology for assessing the radiation impact to biota and the surface water transport model, to develop the analytical techniques for the indicator radionuclides on decommissioning of nuclear facilities and nuclear waste disposal sites and to assess of the national environmental radiation impact and establish the optimum management bases of natural radiation. The obtained results might be used; for assessing the radiological effects due to and radiological incident in an urban area, for assessing radiation doses on biota for the environmental protection from ionizing radiation with the application of new concept of the ICP new recommendation, for analyzing the indicator radionuclides on decommissioning of nuclear facilities and nuclear waste disposal sites, and for providing the natural radionuclide database of Korea to international organizations such as UNSCEAR. It can be used for emphasizing relative nuclear safety

Application of electron beams to environmental conservation technology

International Nuclear Information System (INIS)

Pikaev, A.K.

1992-01-01

The paper is a review of current status of the application of electron beams to environmental conservation technology. Different aspects of radiation treatment of natural and polluted drinking water, radiation purification of industrial and municipal wastes, radiation treatment of sewage sludge and radiation purification of exhaust gases are considered. The special attention is paid to the respective pilot and industrial facilities. (author) 70 refs

Development of Food Preservation and Processing Technologies by Radiation Technology

International Nuclear Information System (INIS)

Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun

2007-07-01

To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

Development of Food Preservation and Processing Technologies by Radiation Technology

Energy Technology Data Exchange (ETDEWEB)

Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun [and others

2007-07-15

To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

Development of Food Preservation and Processing Technologies by Radiation Technology

Energy Technology Data Exchange (ETDEWEB)

Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun (and others)

2007-07-15

To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

The role of IAEA in coordinating research and transferring technology in radiation chemistry and processing of polymers

Energy Technology Data Exchange (ETDEWEB)

Haji-Saeid, M. [International Atomic Energy Agency (IAEA), Wagramer Strasse 5, A-1400 Vienna (Austria)], E-mail: M.Haji-Saeid@iaea.org; Sampa, M.H.; Ramamoorthy, N. [International Atomic Energy Agency (IAEA), Wagramer Strasse 5, A-1400 Vienna (Austria); Gueven, O. [Hacettepe University, Department of Chemistry, Ankara (Turkey); Chmielewski, A.G. [Faculty of Chemical and Process Engineering, Warsaw University of Technology, Warsaw (Poland)

2007-12-15

The IAEA has been playing a significant role in fostering developments in radiation technology in general and radiation processing of polymers in particular, among its Member States (MS) and facilitate know-how/technology transfer to developing MS. The former is usually achieved through coordinated research projects (CRP) and thematic technical meetings, while the latter is mainly accomplished through technical cooperation (TC) projects. Coordinated research projects encourage research on, and development and practical application of, radiation technology to foster exchange of scientific and technical information. The technical cooperation (TC) programme helps Member States to realize their development priorities through the application of appropriate radiation technology. The IAEA has implemented several coordinated research projects (CRP) recently, including one on-going project, in the field of radiation processing of polymeric materials. The CRPs facilitated the acquisition and dissemination of know-how and technology for controlling of degradation effects in radiation processing of polymers, radiation synthesis of stimuli-responsive membranes, hydrogels and absorbents for separation purposes and the use of radiation processing to prepare biomaterials for applications in medicine. The IAEA extends cooperation to well-known international conferences dealing with radiation technology to facilitate participation of talented scientists from developing MS and building collaborations. The IAEA published technical documents, covering the findings of thematic technical meetings (TM) and coordinated research projects have been an important source of valuable practical information.

The role of IAEA in coordinating research and transferring technology in radiation chemistry and processing of polymers

International Nuclear Information System (INIS)

Haji-Saeid, M.; Sampa, M.H.; Ramamoorthy, N.; Gueven, O.; Chmielewski, A.G.

2007-01-01

The IAEA has been playing a significant role in fostering developments in radiation technology in general and radiation processing of polymers in particular, among its Member States (MS) and facilitate know-how/technology transfer to developing MS. The former is usually achieved through coordinated research projects (CRP) and thematic technical meetings, while the latter is mainly accomplished through technical cooperation (TC) projects. Coordinated research projects encourage research on, and development and practical application of, radiation technology to foster exchange of scientific and technical information. The technical cooperation (TC) programme helps Member States to realize their development priorities through the application of appropriate radiation technology. The IAEA has implemented several coordinated research projects (CRP) recently, including one on-going project, in the field of radiation processing of polymeric materials. The CRPs facilitated the acquisition and dissemination of know-how and technology for controlling of degradation effects in radiation processing of polymers, radiation synthesis of stimuli-responsive membranes, hydrogels and absorbents for separation purposes and the use of radiation processing to prepare biomaterials for applications in medicine. The IAEA extends cooperation to well-known international conferences dealing with radiation technology to facilitate participation of talented scientists from developing MS and building collaborations. The IAEA published technical documents, covering the findings of thematic technical meetings (TM) and coordinated research projects have been an important source of valuable practical information

The Role of IAEA in Coordinating Research and Transferring Technology in Radiation Chemistry and Processing of Polymers

International Nuclear Information System (INIS)

Haji Saeid, M.

2006-01-01

The IAEA has been playing a significant role in fostering developments in radiation technology in general and radiation processing of polymers in particular, among its Member States (MS) and facilitate know-how/technology transfer to developing MS. The former is usually achieved through coordinated research projects (CRP) and thematic technical meetings, while the latter is mainly accomplished through Technical Cooperation (TC) projects. Coordinated research projects encourage research on, and development and practical application of, radiation technology to foster exchange of scientific and technical information. The CRP brings together typically 10 - 15 groups of participants to share and complement core competencies and work on specific areas of development needed to benefit from an emerging radiation technique and its applications. The technical cooperation (TC) programme helps Member States realize their development priorities through the application of appropriate radiation technology. TC builds national capacities through training, expert advice and delivery of equipment. The impact of the IAEA's efforts is visible by the progress noticeable in adoption of radiation technology and/or growth in the range of activities in several MS in different regions. The IAEA has implemented several coordinated research projects (CRP) recently, including one on-going project, in the field of radiation processing of polymeric materials. The CRPs facilitated the acquisition and dissemination of know-how and technology for controlling of degradation effects in radiation processing of polymers, radiation synthesis of stimuli-responsive membranes, hydrogels and absorbents for separation purposes and the use of radiation processing to prepare biomaterials for applications in medicine. A number of technical cooperation projects have been implemented in this field to strengthen the capability of developing Member States and to create awareness in the industries about the technical

Proceedings of national executive management seminar on surface finishing by radiation curing technology: radiation curing for better finishing

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

This book compiled the paper presented at this seminar. The papers discussed are 1. Incentives for investment in the manufacturing sector (in Malaysia) 2.Trends and prospect of surface finishing by radiation curing technology in Malaysia 3. Industrial application of radiation curing.

Proceedings of national executive management seminar on surface finishing by radiation curing technology: radiation curing for better finishing

International Nuclear Information System (INIS)

1993-01-01

This book compiled the paper presented at this seminar. The papers discussed are 1. Incentives for investment in the manufacturing sector (in Malaysia) 2.Trends and prospect of surface finishing by radiation curing technology in Malaysia 3. Industrial application of radiation curing

Technology and applications of electron accelerator

International Nuclear Information System (INIS)

Natsir, M.

1998-01-01

Technology of electron accelerator have been developed so fast in advanced countries. It was applied in the research and development (R and D) and comercially in various industries. The industries applying electron accelerator includes polymers industry, sterilization of medical tools, material surface modification, and environmental management. The radiation process using electron beam is an ionization radiation process. Two facilities of electron accelerator have been established in pilot scale at the Centre for the Application of Isotope and Radiation CAIR-BATAN, Jakarta, for the RandD of radiation process technology and in demonstrating the electron accelerator application in industry in Indonesia. The first has low energy specification of 300 keV, 50 mA, EPS-300 type and the second has medium energy specification of 2 MeV, 10 mA dynamitron model GJ-2 type. Both the electron accelerators have an electron penetration depth capability of 0.6 and 12 mm, respectively, for the double side irradiation in the materials with density of 1 g/cm 3 . They also highly capacity production and electron beam cross-section of 120 cm length and 10 cm width. The beam will go through the atmosphere for irradiation samples or industrial products. The radiation dose can be selected precisely by adjusting the electron beam current and conveyor speed. Both of these facilities were applied in many aspects RandD, for examples dosimetry, wood surface coating, cross-linking of polymer, heatshrincable tube, polymer grafting, plastic degradation, food preservation, sterilization and so on. Engineering factors of radiation design process and general observation of electron accelerator application in RandD for various industries in Indonesia are briefly discussed

Radiation hard diamond sensors for future tracking applications

International Nuclear Information System (INIS)

Adam, W.; Boer, W. de; Borchi, E.

2006-01-01

Progress in experimental particle physics in the coming decade depends crucially upon the ability to carry out experiments in high-radiation areas. In order to perform these complex and expensive experiments, new radiation hard technologies must be developed. This paper discusses the use of diamond detectors in future tracking applications and their survivability in the highest radiation environments. We present results of devices constructed with the newest polycrystalline and single crystal Chemical Vapor Deposition diamond and their tolerance to radiation

Radiation technology for immobilization of bioactive materials

International Nuclear Information System (INIS)

1988-12-01

Within the framework of the Agency's coordinated research programme on ''Application of Radiation Technology in Immobilization of Bioactive Materials'', the third and final research coordination meeting was held at Beijing University, Beijing, People's Republic of China, 15-18 June 1987. The present publication compiles all presentations made at the meeting. Fundamental processes for the immobilization of enzymes, antibodies, cells and drugs were developed and established using gamma radiation, electron beams and plasma discharge. Applications of various biofunctional components, immobilized by radiation techniques in different processes, were studied. A range of backbone polymers has been examined together with various monomers. Coupling procedures have been developed which are relevant to our particular requirements. Enzymes of various types and characteristics have been immobilized with considerable efficiency. The immobilized biocatalysts have been shown to possess significant activity and retention of activity on storage. There appears to be a high degree of specificity associated with the properties of the immobilised biocatalysts, their activity and the ease of their preparation. Novel additives which lower the total radiation dose in grafting have been discovered and their value in immobilization processes assessed. Potential applications include: medical (diagnostic, therapeutic), and industrial processes (fermentation, bioseparation, etc.). Refs, figs and tabs

Radiation technology in agriculture

International Nuclear Information System (INIS)

D'Souza, S.F.

2013-01-01

The Department of Atomic Energy through its research, development and deployment activities in nuclear science and technology, has been contributing towards enhancing the production of agricultural commodities and their preservation. Radiations and radioisotopes are used in agricultural research to induce genetic variability in crop plants to develop improved varieties, to manage insect pests, monitor fate and persistence of pesticides, to study fertilizer use efficiency and plant micronutrient uptake and also to preserve agricultural produce. Use of radiation and radioisotopes in agriculture which is often referred to as nuclear agriculture is one of the important fields of peaceful applications of atomic energy for societal benefit and BARC has contributed significantly in this area. 41 new crop varieties developed at BARC have been released and Gazette notified by the MoA, GOI for commercial cultivation and are popular among the farming community and grown through out the country

Radiation technology in the Philippines

International Nuclear Information System (INIS)

Cabalfin, E.G.

1994-01-01

This report was presented during the Second National Coordinators Meeting for radiation technology, held in Vietnam, 21-25 November 1994. The report was about the research and development work in the field of radiation technology at the Philippine Nuclear Research Institute. Transfer of technology in the Philippines can be very difficult without the technical assistance of the IAEA. A multipurpose irradiation facility was set up that encouraged the interest of local industry in radiation sterilization and food irradiation. Also research and development on radiation vulcanization of natural rubber latex has been initiated and the interest in wood plastic combinations has been revived. 1 tab

Role of dosimetry in radiation processing applications

International Nuclear Information System (INIS)

Mehta, Kishor

2001-01-01

Today, radiation processing is a growing technology offering potential technological advantages as well as enhanced safety and economy. It is expanding on two fronts: the variety of applications is exploding as well as the sources of radiation. And with that comes the necessary advances in dosimetry. However, the success of the technology still depends on the assertion that the irradiated products are reliable and safe, whether they are health care products or cables and wires. And this is best assured through quality assurance programmes. The key element in QA in radiation processing is a well-characterised, reliable dosimetry that is traceable to the international measurement system. Traceability is the foundation for international acceptance of the irradiated products; and with international trade of irradiated products on the rise, it becomes absolutely critical. It is thus vital that the industry recognises this pivotal position of good dosimetry and the role a national standards laboratory plays in that connection. (author)

Applications and opportunities for radiation sources

International Nuclear Information System (INIS)

Round, K.J.

1984-01-01

An important spin-off benefit from the nuclear industry has been the ability to produce a wide variety of ionizing radiation sources for industrial, medical and scientific applications. These sources include radionuclides produced by irradiation of target material in reactors and cyclotrons or recovered from spent fuels, and accelerators. The uses of radiation in both medicine and industry can be expected to evolve. Traditional uses such as cancer therapy will mature and in some cases be displaced by new technology. Major new applications, including food processing and waste treatment, are expected to maintain the demand for isotopes such as cobalt 60 and to stimulate the development of economical and reliable accelerator systems. (L.L.) (Tab., 2 figs.)

Better health care: Ghana uses radiation technology to sterilize medical items

International Nuclear Information System (INIS)

Dixit, Aabha

2015-01-01

Infections acquired from improperly sterilized equipment are recognized as a major impediment to safe health care delivery, with consequences that are often deadly for patients. Radiation technology plays a major role in many countries in making medical equipment safer. “The use of nuclear applications, such as exposing medical items to gamma radiation, helps Ghana protect its people from avoidable sicknesses that can occur if items like syringes are not properly sterilized,” said Abraham Adu-Gyamfi, Manager of the Radiation Technology Centre of the Ghana Atomic Energy Commission’s Biotechnology and Nuclear Agriculture Research Institute in Accra.

Radiation-hardened bulk CMOS technology

International Nuclear Information System (INIS)

Dawes, W.R. Jr.; Habing, D.H.

1979-01-01

The evolutionary development of a radiation-hardened bulk CMOS technology is reviewed. The metal gate hardened CMOS status is summarized, including both radiation and reliability data. The development of a radiation-hardened bulk silicon gate process which was successfully implemented to a commercial microprocessor family and applied to a new, radiation-hardened, LSI standard cell family is also discussed. The cell family is reviewed and preliminary characterization data is presented. Finally, a brief comparison of the various radiation-hardened technologies with regard to performance, reliability, and availability is made

Technology for Innovation in Radiation Oncology

Energy Technology Data Exchange (ETDEWEB)

Chetty, Indrin J. [Department of Radiation Oncology, Henry Ford Hospital, Detroit, Michigan (United States); Martel, Mary K., E-mail: mmartel@mdanderson.org [Department of Radiation Physics, University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Jaffray, David A. [Departments of Radiation Oncology and Medical Biophysics, Princess Margaret Hospital, Toronto, Ontario (Canada); Benedict, Stanley H. [Department of Radiation Oncology, University of California – Davis Cancer Center, Sacramento, California (United States); Hahn, Stephen M. [Department of Radiation Oncology, University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Berbeco, Ross [Department of Radiation Oncology, Brigham and Women' s Hospital, Boston, Massachusetts (United States); Deye, James [Radiation Research Programs, National Cancer Institute, Bethesda, Maryland (United States); Jeraj, Robert [Department of Medical Physics, University of Wisconsin, Madison, Wisconsin (United States); Kavanagh, Brian [Department of Radiation Oncology, University of Colorado, Aurora, Colorado (United States); Krishnan, Sunil [Department of Radiation Oncology, University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Lee, Nancy [Department of Radiation Oncology, Memorial Sloan Kettering Cancer Center, New York, New York (United States); Low, Daniel A. [Department of Radiation Oncology, University of California – Los Angeles, Los Angeles, California (United States); Mankoff, David [Department of Radiology, University of Washington Medical School, Seattle, Washington (United States); Marks, Lawrence B. [Department of Radiation Oncology, University of North Carolina Hospitals, Chapel Hill, North Carolina (United States); Ollendorf, Daniel [Institute for Clinical and Economic Review, Boston, Massachusetts (United States); and others

2015-11-01

Radiation therapy is an effective, personalized cancer treatment that has benefited from technological advances associated with the growing ability to identify and target tumors with accuracy and precision. Given that these advances have played a central role in the success of radiation therapy as a major component of comprehensive cancer care, the American Society for Radiation Oncology (ASTRO), the American Association of Physicists in Medicine (AAPM), and the National Cancer Institute (NCI) sponsored a workshop entitled “Technology for Innovation in Radiation Oncology,” which took place at the National Institutes of Health (NIH) in Bethesda, Maryland, on June 13 and 14, 2013. The purpose of this workshop was to discuss emerging technology for the field and to recognize areas for greater research investment. Expert clinicians and scientists discussed innovative technology in radiation oncology, in particular as to how these technologies are being developed and translated to clinical practice in the face of current and future challenges and opportunities. Technologies encompassed topics in functional imaging, treatment devices, nanotechnology, and information technology. The technical, quality, and safety performance of these technologies were also considered. A major theme of the workshop was the growing importance of innovation in the domain of process automation and oncology informatics. The technologically advanced nature of radiation therapy treatments predisposes radiation oncology research teams to take on informatics research initiatives. In addition, the discussion on technology development was balanced with a parallel conversation regarding the need for evidence of efficacy and effectiveness. The linkage between the need for evidence and the efforts in informatics research was clearly identified as synergistic.

Technology for Innovation in Radiation Oncology

International Nuclear Information System (INIS)

Chetty, Indrin J.; Martel, Mary K.; Jaffray, David A.; Benedict, Stanley H.; Hahn, Stephen M.; Berbeco, Ross; Deye, James; Jeraj, Robert; Kavanagh, Brian; Krishnan, Sunil; Lee, Nancy; Low, Daniel A.; Mankoff, David; Marks, Lawrence B.; Ollendorf, Daniel

2015-01-01

Radiation therapy is an effective, personalized cancer treatment that has benefited from technological advances associated with the growing ability to identify and target tumors with accuracy and precision. Given that these advances have played a central role in the success of radiation therapy as a major component of comprehensive cancer care, the American Society for Radiation Oncology (ASTRO), the American Association of Physicists in Medicine (AAPM), and the National Cancer Institute (NCI) sponsored a workshop entitled “Technology for Innovation in Radiation Oncology,” which took place at the National Institutes of Health (NIH) in Bethesda, Maryland, on June 13 and 14, 2013. The purpose of this workshop was to discuss emerging technology for the field and to recognize areas for greater research investment. Expert clinicians and scientists discussed innovative technology in radiation oncology, in particular as to how these technologies are being developed and translated to clinical practice in the face of current and future challenges and opportunities. Technologies encompassed topics in functional imaging, treatment devices, nanotechnology, and information technology. The technical, quality, and safety performance of these technologies were also considered. A major theme of the workshop was the growing importance of innovation in the domain of process automation and oncology informatics. The technologically advanced nature of radiation therapy treatments predisposes radiation oncology research teams to take on informatics research initiatives. In addition, the discussion on technology development was balanced with a parallel conversation regarding the need for evidence of efficacy and effectiveness. The linkage between the need for evidence and the efforts in informatics research was clearly identified as synergistic.

Instrumentation for Applied Physics and Industrial Applications: Applications of Detectors in Technology, Medicine and Other Fields

CERN Document Server

Hillemanns, H

2011-01-01

Instrumentation for Applied Physics and Industrial Applications in 'Applications of Detectors in Technology, Medicine and Other Fields', part of 'Landolt-Börnstein - Group I Elementary Particles, Nuclei and Atoms: Numerical Data and Functional Relationships in Science and Technology, Volume 21B2: Detectors for Particles and Radiation. Part 2: Systems and Applications'. This document is part of Part 2 'Principles and Methods' of Subvolume B 'Detectors for Particles and Radiation' of Volume 21 'Elementary Particles' of Landolt-Börnstein - Group I 'Elementary Particles, Nuclei and Atoms'. It contains the Section '7.3 Instrumentation for Applied Physics and Industrial Applications' of Chapter '7 Applications of Detectors in Technology; Medicine and Other Fields' with the content: 7.3 Instrumentation for Applied Physics and Industrial Applications 7.3.1 Applications of HEP Detectors 7.3.2 Fast Micro- and Nanoelectronics for Particle Detector Readout 7.3.2.1 Fast Counting Mode Front End Electronics 7.3.2.2 NINO,...

Radiation hardening of integrated circuits technologies

International Nuclear Information System (INIS)

Auberton-Herve, A.J.; Leray, J.L.

1991-01-01

The radiation hardening studies started in the mid decade -1960-1970. To survive the different military or space radiative environment, a new engineering science borned, to understand the degradation of electronics components. The different solutions to improve the electronic behavior in such environment, have been named radiation hardening of the technologies. Improvement of existing technologies, and qualification method have been widely studied. However, at the other hand, specific technologies was developped : The Silicon On Insulator technologies for CMOS or Bipolar. The HSOI3HD technology (supported by DGA-CEA DAM and LETI with THOMSON TMS) offers today the highest hardening level for the integration density of hundreds of thousand transistors on the same silicon. Full complex systems would be realized on a single die with a technological radiation hardening and no more system hardening

Technology for Innovation in Radiation Oncology.

Science.gov (United States)

Chetty, Indrin J; Martel, Mary K; Jaffray, David A; Benedict, Stanley H; Hahn, Stephen M; Berbeco, Ross; Deye, James; Jeraj, Robert; Kavanagh, Brian; Krishnan, Sunil; Lee, Nancy; Low, Daniel A; Mankoff, David; Marks, Lawrence B; Ollendorf, Daniel; Paganetti, Harald; Ross, Brian; Siochi, Ramon Alfredo C; Timmerman, Robert D; Wong, John W

2015-11-01

Radiation therapy is an effective, personalized cancer treatment that has benefited from technological advances associated with the growing ability to identify and target tumors with accuracy and precision. Given that these advances have played a central role in the success of radiation therapy as a major component of comprehensive cancer care, the American Society for Radiation Oncology (ASTRO), the American Association of Physicists in Medicine (AAPM), and the National Cancer Institute (NCI) sponsored a workshop entitled "Technology for Innovation in Radiation Oncology," which took place at the National Institutes of Health (NIH) in Bethesda, Maryland, on June 13 and 14, 2013. The purpose of this workshop was to discuss emerging technology for the field and to recognize areas for greater research investment. Expert clinicians and scientists discussed innovative technology in radiation oncology, in particular as to how these technologies are being developed and translated to clinical practice in the face of current and future challenges and opportunities. Technologies encompassed topics in functional imaging, treatment devices, nanotechnology, and information technology. The technical, quality, and safety performance of these technologies were also considered. A major theme of the workshop was the growing importance of innovation in the domain of process automation and oncology informatics. The technologically advanced nature of radiation therapy treatments predisposes radiation oncology research teams to take on informatics research initiatives. In addition, the discussion on technology development was balanced with a parallel conversation regarding the need for evidence of efficacy and effectiveness. The linkage between the need for evidence and the efforts in informatics research was clearly identified as synergistic. Copyright © 2015 Elsevier Inc. All rights reserved.

Radiation protection and dosimetry issues in the medical applications of ionizing radiation

International Nuclear Information System (INIS)

Vaz, Pedro

2014-01-01

The technological advances that occurred during the last few decades paved the way to the dissemination of CT-based procedures in radiology, to an increasing number of procedures in interventional radiology and cardiology as well as to new techniques and hybrid modalities in nuclear medicine and in radiotherapy. These technological advances encompass the exposure of patients and medical staff to unprecedentedly high dose values that are a cause for concern due to the potential detrimental effects of ionizing radiation to the human health. As a consequence, new issues and challenges in radiological protection and dosimetry in the medical applications of ionizing radiation have emerged. The scientific knowledge of the radiosensitivity of individuals as a function of age, gender and other factors has also contributed to raising the awareness of scientists, medical staff, regulators, decision makers and other stakeholders (including the patients and the public) for the need to correctly and accurately assess the radiation induced long-term health effects after medical exposure. Pediatric exposures and their late effects became a cause of great concern. The scientific communities of experts involved in the study of the biological effects of ionizing radiation have made a strong case about the need to undertake low dose radiation research and the International System of Radiological Protection is being challenged to address and incorporate issues such as the individual sensitivities, the shape of dose–response relationship and tissue sensitivity for cancer and non-cancer effects. Some of the answers to the radiation protection and dosimetry issues and challenges in the medical applications of ionizing radiation lie in computational studies using Monte Carlo or hybrid methods to model and simulate particle transport in the organs and tissues of the human body. The development of sophisticated Monte Carlo computer programs and voxel phantoms paves the way to an accurate

Radiation technology and feed production

International Nuclear Information System (INIS)

Ershov, B.G.

1986-01-01

The use of radiation technology to prepare feeds and feed additions for cattle of non-feed vegetable blends is considered.Physicochemical foundations of radiation-chemical processes, possibilities of the use of various radiation devices are given. Data on practical realization of the technology are presented and prospects of its introduction to solve the tasks put forward by the USSR program on feed production are analyzed

Technological yields of sources for radiation processing

International Nuclear Information System (INIS)

Zagorski, Z.P.

1990-01-01

The present report is prepared for planners of radiation processing of any material. Sources with cobalt-60 are treated marginally, because most probably, there will be no installation of technically meaningful activity in Poland before the year 2000. Calculations are focused on accelerators of electrons, divided into two groups: versatile linacs of energy up to 13 MeV and accelerators of lower energy, below 2 MeV, of better energetical yield but of limited applications. The calculations are connected with the confrontation of the author's technological expectations during the preparation of the linac project in the late '60s, with the results of twenty years of exploitation of the machine. One has to realize that from the 150 kV input power from the mains, only 5 kV of bent and scanned beam is recovered on the conveyor. That power is only partially used for radiation induced phenomena, sometimes only a few percent, because of the demanded homogeneity of the dose, of the mode of packing of the object and its shape, of losses at the edges of the scanned area and in the spaces between boxes, and of losses during the dead time due to the tuning of the machine and dosimetric operations. The use of lower energy accelerators may be more economical in case of objects of optimum type. At the first stage, that is of the conversion of electrical power into that of the low energy electron beam, the yield is 2-3 times better than in the case of linacs. Attention has been paid to the technological aspects of electron beam conversion into the more penetrating bremsstrahlung similar to gamma radiation. The advantages of these technologies, which make it possible to control the shape of the processed object are stressed. Ten parameters necessary for a proper calculation of technological yields of radiation processing are listed. Additional conditions which must be taken into account in the comparison of the cost of radiation processing with the cost of other technologies are also

Radiation Processed Materials in Products from Polymers for Agricultural Applications

International Nuclear Information System (INIS)

2014-07-01

This publication results from a technical meeting on radiation processed materials in products from polymers for agricultural applications, which was held from 8 to 12 July 2013 at the IAEA in Vienna. The meeting provided a forum for the sharing of practical experiences and lessons learned, and reviewed the recent developments in the use of radiation technologies for the preparation of environmental friendly products based on polymers for agricultural applications

Radiation Processed Materials in Products from Polymers for Agricultural Applications

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-07-15

This publication results from a technical meeting on radiation processed materials in products from polymers for agricultural applications, which was held from 8 to 12 July 2013 at the IAEA in Vienna. The meeting provided a forum for the sharing of practical experiences and lessons learned, and reviewed the recent developments in the use of radiation technologies for the preparation of environmental friendly products based on polymers for agricultural applications.

Application of radiation in Bangladesh

Energy Technology Data Exchange (ETDEWEB)

Naiyyum Choudhury; Najmul Alam Chowdhury; Feroza Akhtar [Bangladesh Atomic Energy Commission, Dhaka (Bangladesh)

2001-03-01

Radiation technology offers a very wide scope for utilisation and commercial exploitation in various field. All over the world, this technology is being favourably considered for different applications like radiation sterilisation of medical products, preservation of food by controlling the physiological processes for extending shelf-life and eradication of microbial and insect pests, radiation processing of polymeric materials and treatment of sewage sludge. Bangladesh Atomic Energy Commission has taken radiation processing programmes in a big way right from its inception. This paper describes the studies carried out by various research groups in Bangladesh Atomic Energy Commission mainly using Cobalt-60 gamma radiation. The investigation covers medical sterilisation, food preservation and development and modification of polymeric materials by gamma radiation. Both food preservation and radiation sterilisation of medical products are now being commercially carried out in the Gammatech facility as a joint venture company of BAEC and a private entrepreneur. Bangladesh is soon going to establish a full-fledged Tissue Bank to cater the needs of various tissue allografts for surgical replacement. Recently Government of Bangladesh has allocated US$ 1.00 million for strengthening of the Tissue Banking Laboratory. BAEC has made quite a good research contribution on vulcanization of natural rubber latex, wood plastic composites, surface coating curing, polymer modification etc. As a result of successful achievement of R and D activities in all these projects, a pilot plant project involving about US$ 4.00 million is under implementation at the Atomic energy Research Establishment campus of BAEC. In addition a project on 'National Polymer Centre' at a cost of US$ 2.00 million has already been approved. It is expected that work on radiation processing including commercialization will be accelerated with the implementation of these projects. The impact of radiation

Application of radiation in Bangladesh

International Nuclear Information System (INIS)

Naiyyum Choudhury; Najmul Alam Chowdhury; Feroza Akhtar

2001-01-01

Radiation technology offers a very wide scope for utilisation and commercial exploitation in various field. All over the world, this technology is being favourably considered for different applications like radiation sterilisation of medical products, preservation of food by controlling the physiological processes for extending shelf-life and eradication of microbial and insect pests, radiation processing of polymeric materials and treatment of sewage sludge. Bangladesh Atomic Energy Commission has taken radiation processing programmes in a big way right from its inception. This paper describes the studies carried out by various research groups in Bangladesh Atomic Energy Commission mainly using Cobalt-60 gamma radiation. The investigation covers medical sterilisation, food preservation and development and modification of polymeric materials by gamma radiation. Both food preservation and radiation sterilisation of medical products are now being commercially carried out in the Gammatech facility as a joint venture company of BAEC and a private entrepreneur. Bangladesh is soon going to establish a full-fledged Tissue Bank to cater the needs of various tissue allografts for surgical replacement. Recently Government of Bangladesh has allocated US$ 1.00 million for strengthening of the Tissue Banking Laboratory. BAEC has made quite a good research contribution on vulcanization of natural rubber latex, wood plastic composites, surface coating curing, polymer modification etc. As a result of successful achievement of R and D activities in all these projects, a pilot plant project involving about US$ 4.00 million is under implementation at the Atomic energy Research Establishment campus of BAEC. In addition a project on 'National Polymer Centre' at a cost of US$ 2.00 million has already been approved. It is expected that work on radiation processing including commercialization will be accelerated with the implementation of these projects. The impact of radiation processing

Application of radiation in Bangladesh

Energy Technology Data Exchange (ETDEWEB)

Choudhury, Naiyyum; Chowdhury, Najmul Alam; Akhtar, Feroza [Bangladesh Atomic Energy Commission, Dhaka (Bangladesh)

2001-03-01

Radiation technology offers a very wide scope for utilisation and commercial exploitation in various field. All over the world, this technology is being favourably considered for different applications like radiation sterilisation of medical products, preservation of food by controlling the physiological processes for extending shelf-life and eradication of microbial and insect pests, radiation processing of polymeric materials and treatment of sewage sludge. Bangladesh Atomic Energy Commission has taken radiation processing programmes in a big way right from its inception. This paper describes the studies carried out by various research groups in Bangladesh Atomic Energy Commission mainly using Cobalt-60 gamma radiation. The investigation covers medical sterilisation, food preservation and development and modification of polymeric materials by gamma radiation. Both food preservation and radiation sterilisation of medical products are now being commercially carried out in the Gammatech facility as a joint venture company of BAEC and a private entrepreneur. Bangladesh is soon going to establish a full-fledged Tissue Bank to cater the needs of various tissue allografts for surgical replacement. Recently Government of Bangladesh has allocated US$ 1.00 million for strengthening of the Tissue Banking Laboratory. BAEC has made quite a good research contribution on vulcanization of natural rubber latex, wood plastic composites, surface coating curing, polymer modification etc. As a result of successful achievement of R and D activities in all these projects, a pilot plant project involving about US$ 4.00 million is under implementation at the Atomic energy Research Establishment campus of BAEC. In addition a project on 'National Polymer Centre' at a cost of US$ 2.00 million has already been approved. It is expected that work on radiation processing including commercialization will be accelerated with the implementation of these projects. The impact of radiation processing

High-energy radiation and polymers: A review of commercial processes and emerging applications

International Nuclear Information System (INIS)

Clough, R.L.

2001-01-01

Ionizing radiation has been found to be widely applicable in modifying the structure and properties of polymers, and can be used to tailor the performance of either bulk materials or surfaces. Fifty years of research in polymer radiation chemistry has led to numerous applications of commercial and economic importance, and work remains active in the application of radiation to practical uses involving polymeric materials. This paper provides a survey of radiation-processing methods of industrial interest, ranging from technologies already commercially well established, through innovations in the active R and D stage which show exceptional promise for future commercial use. Radiation-processing technologies are discussed under the following categories: cross-linking of plastics and rubbers, curing of coatings and inks, heat-shrink products, fiber-matrix composites, chain-scission for processing control, surface modification, grafting, hydrogels, sterilization, natural product enhancement, plastics recycling, ceramic precursors, electronic property materials, ion-track membranes and lithography for microdevice production. In addition to new technological innovations utilizing conventional gamma and e-beam sources, a number of promising new applications make use of novel radiation types which include ion beams (heavy ions, light ions, highly focused microscopic beams and high-intensity pulses), soft X-rays which are focused, coherent X-rays (from a synchrotron) and e-beams which undergo scattering to generate patterns

Radiation and life: Proceedings of the 8. Nuclear Science and Technology Conference (NST8)

International Nuclear Information System (INIS)

2001-06-01

The 8th conference on nuclear science and technology was held on 21-22 June 2001 in Bangkok. This conference contain paper on non-power applications of nuclear technology in medicine, agriculture and industry. These application include irradiation of food for des infestration tram technologies used in diagnosis and therapy and radiation chemistry important to industrial processes. Some technologies which evolved from the development of nuclear power industry are also discussed

Radiation and life: Proceedings of the 8. Nuclear Science and Technology Conference (NST8)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-06-01

The 8th conference on nuclear science and technology was held on 21-22 June 2001 in Bangkok. This conference contain paper on non-power applications of nuclear technology in medicine, agriculture and industry. These application include irradiation of food for des infestration tram technologies used in diagnosis and therapy and radiation chemistry important to industrial processes. Some technologies which evolved from the development of nuclear power industry are also discussed.

IAEA education and training programs in radiation technology

International Nuclear Information System (INIS)

Ma Zueteh

1995-01-01

In order to assist the promotion of the industrial application of isotopes and radiation in Southeast Asia and Pacific region, the regional IAEA/UNDP/RCA project was formed in 1982. Phase 1 was 1982-1986, Phase 2 was 1987-1991, and now it entered Phase 3, 1993-1997. 15 countries joined the project, and now the donor countries expanded to five or more including Japan, Australia, China, ROK and India. Radiation technology is one of the subprojects of the regional project, aiming at transferring this technology from developed countries to developing countries and promoting to industrialize this technology. For the purpose, technical personnel and their skill are essential, and IAEA supports and supplements the educational and training program in developing countries. Executive management seminar (EMS), national workshop (NW), regional training course (RTC) and national training courses (NTCs) are the main components of this education program. The contents of these components are explained, and the activities which were carried out so far under them are reported. (K.I.)

Applications of nuclear technology in industry, environment and medicine

International Nuclear Information System (INIS)

Vera Ruiz, H.

1998-01-01

This article contains information on different applications of nuclear technology, such as: sterilization of single use medical products, radiation serialization of pharmaceutical products,radiation treatment of disposable products, in Europe, radiation treatment of micro-titer plates, several crosslinking processes, radiation vulcanization of natural rubber latex, irradiation of polymers to obtain dressings for burns, ulcers bedsores and skin grafts, production of ground water with accelerated electrons in combination with accelerated electrons in combination with ozone, radiation treatment of hospital wastes. (S. Grainger)

Anticipated development of radiation safety corresponding to utilization of nuclear technology in Vietnam

International Nuclear Information System (INIS)

Tran, Toan Ngoc; Le, Thiem Ngoc

2010-01-01

In the past, due to the limited application of radiation and radioisotope in the national economic branches, radiation safety was not paid much attention to in Vietnam. However, according to the Strategy for Peaceful Utilization of Atomic Energy up to 2020 approved by the Prime Minister on January 3, 2006 the application of radiation and radioisotopes as well as nuclear power in Vietnam is expected increasing strongly and widely, then radiation safety should be developed correspondingly. This paper presents the history of radiation protection, the current status and prospect of utilization of atomic energy and the anticipated development of the national radiation safety system to meet the demand of utilization of nuclear technology in Vietnam. (author)

Radiation tolerance study of a commercial 65 nm CMOS technology for high energy physics applications

Energy Technology Data Exchange (ETDEWEB)

Ding, Lili, E-mail: lili03.ding@gmail.com [Department of Information Engineering, Padova University, Via Gradenigo 6/B, 35131 Padova (Italy); INFN, Padova, Via Marzolo 8, 35131 Padova (Italy); State Key Laboratory of Pulsed Radiation Simulation and Effect, Northwest Institute of Nuclear Technology, Xi' an (China); Gerardin, Simone [Department of Information Engineering, Padova University, Via Gradenigo 6/B, 35131 Padova (Italy); INFN, Padova, Via Marzolo 8, 35131 Padova (Italy); Bagatin, Marta [Department of Information Engineering, Padova University, Via Gradenigo 6/B, 35131 Padova (Italy); Bisello, Dario [Department of Physics and Astronomy, Padova University, Via Marzolo 8, 35131 Padova (Italy); INFN, Padova, Via Marzolo 8, 35131 Padova (Italy); Mattiazzo, Serena [Department of Physics and Astronomy, Padova University, Via Marzolo 8, 35131 Padova (Italy); Paccagnella, Alessandro [Department of Information Engineering, Padova University, Via Gradenigo 6/B, 35131 Padova (Italy); INFN, Padova, Via Marzolo 8, 35131 Padova (Italy)

2016-09-21

This paper reports the radiation tolerance study of a commercial 65 nm technology, which is a strong candidate for the Large Hadron Collider applications. After exposure to 3 MeV protons till 1 Grad dose, the 65 nm CMOS transistors, especially the pMOSFETs, showed severe long-term degradation mainly in the saturation drain currents. There were some differences between the degradation levels in the nMOSFETs and the pMOSFETs, which were likely attributed to the positive charges trapped in the gate spacers. After exposure to heavy ions till multiple strikes, the pMOSFETs did not show any sudden loss of drain currents, the degradations in the characteristics were negligible.

International symposium on radiation technology in emerging industrial applications. Book of extended synopses

International Nuclear Information System (INIS)

2000-11-01

The book contains 116 extended synopses of the oral and poster presentations delivered at the symposium. They present advances in radiation processing technology including radiosterilization and radiolysis of toxic wastes; radiosterilization of food, cosmetics and medical supplies; radiation assisted synthesis of polymer materials; design of gamma irradiation devices and accelerators for electron beam processing. Each of the papers was indexed separately

International symposium on radiation technology in emerging industrial applications. Book of extended synopses

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-11-01

The book contains 116 extended synopses of the oral and poster presentations delivered at the symposium. They present advances in radiation processing technology including radiosterilization and radiolysis of toxic wastes; radiosterilization of food, cosmetics and medical supplies; radiation assisted synthesis of polymer materials; design of gamma irradiation devices and accelerators for electron beam processing. Each of the papers was indexed separately.

Development of environmental radiation control technology

International Nuclear Information System (INIS)

Kim, Ingyu; Kim, Enhan; Keum, Dongkwon

2012-04-01

To develop the comprehensive environmental radiation management technology, - An urban atmospheric dispersion model and decision-aiding model have been developed. - The technologies for assessing the radiation impact to non-human biota and the environmental medium contamination have developed. - The analytical techniques of the indicator radionuclides related to decommissioning of nuclear facilities and nuclear waste repository have been developed. - The national environmental radiation impact has been assessed, and the optimum management system of natural radiation has been established

Report of promotion expert commission for radiation application on 'Promotion of accelerator application study'

International Nuclear Information System (INIS)

1997-01-01

This is a report published on June, 1996, by promotion expert commission for radiation application of the Atomic Energy Commission. Japanese research and development in the fields of forming and application techniques of radiation beams using accelerator is at comparatively high level in the world, and it seems to be important for Japan not only to maintain these research and development level but also to contribute to creation of worldwide intelligent welfare due to scientific technology. In this report, some investigations are conducted on present state and future view of the radiation application study using accelerator, accelerator facility necessary to promote such application study and a procedure to execute its smooth application. However, objects of the study are not limited only for physical study on elementary particle and atomic nucleus, but expanded to photon, electron, positron, muon, proton, neutron, various inonic beams and RI beams for radiations, which are widely applied to industries such as materials science, material engineering, bio-and life-science, medical science, technical engineering, and so forth, and which will be expected for large contribution to development of these industries. The following items are discussed here; 1) present state and future view of radiation application study using accelerator, 2) Accelerator to be prepared and its executing method, and 3) Promotion method of the accelerator application study. (G.K.)

Radiation immune RAM semiconductor technology for the 80's. [Random Access Memory

Science.gov (United States)

Hanna, W. A.; Panagos, P.

1983-01-01

This paper presents current and short term future characteristics of RAM semiconductor technologies which were obtained by literature survey and discussions with cognizant Government and industry personnel. In particular, total ionizing dose tolerance and high energy particle susceptibility of the technologies are addressed. Technologies judged compatible with spacecraft applications are ranked to determine the best current and future technology for fast access (less than 60 ns), radiation tolerant RAM.

Technology development for radiation shielding analysis

International Nuclear Information System (INIS)

Ha, Jung Woo; Lee, Jae Kee; Kim, Jong Kyung

1986-12-01

Radiation shielding analysis in nuclear engineering fields is an important technology which is needed for the calculation of reactor shielding as well as radiation related safety problems in nuclear facilities. Moreover, the design technology required in high level radioactive waste management and disposal facilities is faced on serious problems with rapidly glowing nuclear industry development, and more advanced technology has to be developed for tomorrow. The main purpose of this study is therefore to build up the self supporting ability of technology development for the radiation shielding analysis in order to achieve successive development of nuclear industry. It is concluded that basic shielding calculations are possible to handle and analyze by using our current technology, but more advanced technology is still needed and has to be learned for the degree of accuracy in two-dimensional shielding calculation. (Author)

Shutdown and degradation: Space computers for nuclear application, verification of radiation hardness. Final report

International Nuclear Information System (INIS)

Eichhorn, E.; Gerber, V.; Schreyer, P.

1995-01-01

(1) Employment of those radiation hard electronics which are already known in military and space applications. (2) The experience in space-flight shall be used to investigate nuclear technology areas, for example, by using space electronics to prove the range of applications in nuclear radiating environments. (3) Reproduction of a computer developed for telecommunication satellites; proof of radiation hardness by radiation tests. (4) At 328 Krad (Si) first failure of radiation tolerant devices with 100 Krad (Si) hardness guaranteed. (5) Using radiation hard devices of the same type you can expect applications at doses of greater than 1 Mrad (Si). Electronic systems applicable for radiation categories D, C and lower part of B for manipulators, vehicles, underwater robotics. (orig.) [de

Radiation Processing of Natural Polymers for Industrial Applications

International Nuclear Information System (INIS)

Hegazy, E.A.

2008-01-01

Radiation induced degradation technology is a new and promising application of ionizing radiation to develop viscose, pulp, paper, food preservation, pharmaceutical production, and natural bioactive agents industries. Controlling the degree of degradation, uniform molecular weight distribution, saving achieved in the chemicals (used in conventional methods) on a cost basis, and environmentally friendly process are the beneficial effects of using radiation technology in these industries. However, for some development countries such technology is not economic. Therefore, a great effort should be done to reduce the cost required for such technologies. One of the principle factors for reducing the cost is achieving the degradation at low irradiation doses. The addition of some additives such as potassium per-sulfate (KPS), ammonium per-sulfate (APS), or H 2 O 2 to natural polymers (carboxy-methylcellulose (CMC), chitosan, carrageenan and Na-alginate) during irradiation process accelerates their degradation. The highest degradation rate of polysaccharides obtained when APS was used. The end product of irradiated CMC, chitosan, carrageenan and Na-alginate may be used as food additive or benefited in agricultural purposes. On the other hand, radiation crosslinking of PAAm or PNIPAAm is affected by the presence of natural polymer like CMC-Na and carrageenan due to their degradability which could be controlled according to its concentration in the bulk medium and irradiation dose. Accordingly, the gel content, thermo-sensitivity (LCST) and swelling properties of PNIPAAm based natural polymers could be controlled. The swelling of the prepared copolymer hydrogels was investigated for its possible use in personal care articles particularly diapers or as carriers for drug delivery systems. The prepared crosslinked copolymers possessed high and fast swelling properties in simulated urine media and the swelling ratios of CMC-Na /PAAm gels in urine are acceptable for diaper

Status of radiation applications in developing countries

International Nuclear Information System (INIS)

Roushdy, H.M.

1979-01-01

A summary is given of the following applications: radiotherapy; sterilization of medical products and biological tissues; inactivation of virus; food preservation; insect control and eradication; improvement in field crops; treatment of waste waters and sewage sludge. In industry, irradiation technology has contributed to the manufacturing industries for new product developments in the plastics, textiles, wood, rubber, petroleum, concrete and chemical industries. Irradiation technology offers a fascinating outlet for developing countries for improving their condition of medical care, upgrading of their natural materials, stimulating their industrial development, decreasing their food losses and increasing their crop production. These lines would certainly contribute to their national economy and would result in an enhanced rate of development. However, transfer of radiation technology to developing countries should be undertaken in view of the actual national and regional needs and supported by an overall well studied national and regional planning for trained manpower development. The choice of a radiation source for a potential application should be based on the demand of the process, compromise between desirability and cost and quantitative data on installation, operation and maintenance conditions, and costs. The program developed and implemented by Egypt is herein presented. Facilities, organization, personnel, current and past activities, and future plans are described. (author)

Applications of isotopes and radiation in conservation of the environment

International Nuclear Information System (INIS)

1992-01-01

The objective of the symposium was to review present knowledge of the applications of radiation, radioisotopes and nuclear methods of analysis in the monitoring and control of environmental pollution and in reducing emissions of environmentally toxic substances. The scientific programme covered a wide range of different applications of nuclear technology, such as flue gas purification, radiation processing of liquid and solid wastes, radiotracer studies and nuclear analytical techniques and their applications. The symposium was attended by 92 participants representing 31 IAEA Member States. Separate abstracts were prepared for 46 of the papers in this volume. Refs, figs and tabs

Application study of nuclear technologies for integration chemical, biological and radiological technology

Energy Technology Data Exchange (ETDEWEB)

Shin, Jae Kon; Han, M. H.; Kim, Y. H.; Yang, J. E.; Jung, K. S.; Cha, H. K.; Moon, J.; La, K. H

2001-02-01

The projects are suggested the method to maximize the technology and research results which are being carried out by KAERI on the nuclear field. The study presents 1)the technology to rapidly and accurately determine and the nature of contamination, 2) the technology to predict the spread of contaminant and the magnitude of damage, and 3) the expert-aided decision making technology to identify the optimum counter-measures. And the solutions are also suggested the application to military technology in Chemical, Biological and Radiation field. In addition, I hope this kind of cooperation model come to be the good case of military civilian research harmony to improve the national competition capability.

Planning report for establishment of research infrastructure for national advanced radiation technology

International Nuclear Information System (INIS)

Kuk, Il Hyun; Byun, Myung Woo; Lee, Ju Woon

2005-04-01

Establishment of research infrastructure and assistant of industry renovation is needed to achieve technology level-up in the all industry areas including plant engineering, material engineering, polymers, nondestructive tests, radioisotope tracer application, environment engineering, medical science, agriculture, sterilization, sprouting, biotechnology and aerospace, which would be the core motivation of our future industry. Especially for early settlement of research environment for the new RT-specialized national institute, Advanced Radiation Technology Institute (ARTI) in Jeongup, Chonbuk, Korea is essential. For this purpose, an intensive system construction is demanded including: 1) Area of establishment of the system assisting radiation technology advancement: It is expected that radioisotope production for industrial or medical uses and activation of the related researches and training of experts by manufacture, installation, and operation of 30 MeV cyclotron. It also can be contributed in the promotion of national radiation related science and technology by establishment of a basic and advanced analysis system. 2) Area of establishment of training and education system of RT experts. 3) Area of establishment of a system for technological assistance for industry and industry-university-institute network. Contribution to balanced regional development and promotion of national RT-based science through establishment of RT industry cluster with Advanced Radiation Technology Institute (ARTi) at Jeongup as the center figure

Development of clean environment conservation technology by radiation

International Nuclear Information System (INIS)

Lee, Myunjoo; Kim, Tak Hyun; Jung, In Ha

2012-04-01

This report is aim to develop the technology for environmental conservation by radiation. It is consisted of two research parts. One is development of wastewater disinfection technology by radiation and the other is development of livestock waste treatment technology by radiation. For the development of wastewater disinfection technology disinfect ion process, technology for treatment of toxic organic chemicals and assessment of ecological toxicity, technology for treatment of endocrine disrupting chemicals and assessment of genetic safety were developed. For the development of livestock waste treatment technology, process for simultaneous removal of nutrients, technology for disinfection and quality enhancement of livestock waste compost, technology for reduction of composting periods, monitoring of toxic organic compounds, pretreatment technology for organic toxic chemicals and enhancement of biological treatment efficiencies were developed. Based on basic research, advanced livestock wastewater treatment process using radiation was established

Computer applications in radiation protection

International Nuclear Information System (INIS)

Cole, P.R.; Moores, B.M.

1995-01-01

Computer applications in general and diagnostic radiology in particular are becoming more widespread. Their application to the field of radiation protection in medical imaging, including quality control initiatives, is similarly becoming more widespread. Advances in computer technology have enabled departments of diagnostic radiology to have access to powerful yet affordable personal computers. The application of databases, expert systems and computer-based learning is under way. The executive information systems for the management of dose and QA data that are under way at IRS are discussed. An important consideration in developing these pragmatic software tools has been the range of computer literacy within the end user group. Using interfaces have been specifically designed to reflect the requirements of many end users who will have little or no computer knowledge. (Author)

Nonvolatile Memory Technology for Space Applications

Science.gov (United States)

Oldham, Timothy R.; Irom, Farokh; Friendlich, Mark; Nguyen, Duc; Kim, Hak; Berg, Melanie; LaBel, Kenneth A.

2010-01-01

This slide presentation reviews several forms of nonvolatile memory for use in space applications. The intent is to: (1) Determine inherent radiation tolerance and sensitivities, (2) Identify challenges for future radiation hardening efforts, (3) Investigate new failure modes and effects, and technology modeling programs. Testing includes total dose, single event (proton, laser, heavy ion), and proton damage (where appropriate). Test vehicles are expected to be a variety of non-volatile memory devices as available including Flash (NAND and NOR), Charge Trap, Nanocrystal Flash, Magnetic Memory (MRAM), Phase Change--Chalcogenide, (CRAM), Ferroelectric (FRAM), CNT, and Resistive RAM.

Development of Plant Application Technique of Low Dose Radiation

Energy Technology Data Exchange (ETDEWEB)

Chung, Byung Yeoup; Kim, Jae Sung; Lim, Yong Taek (and others)

2007-07-15

The project was carried out to achieve three aims. First, development of application techniques of cell-stimulating effects by low-dose radiation. Following irradiation with gamma-rays of low doses, beneficial effects in crop germination, early growth, and yield were investigated using various plant species and experimental approaches. For the actual field application, corroborative studies were also carried out with a few concerned experimental stations and farmers. Moreover, we attempted to establish a new technique of cell cultivation for industrial mass-production of shikonin, a medicinal compound from Lithospermum erythrorhizon and thereby suggested new application fields for application techniques of low-dose radiation. Second, elucidation of action mechanisms of ionizing radiation in plants. By investigating changes in plant photosynthesis and physiological metabolism, we attempted to elucidate physiological activity-stimulating effects of low-dose radiation and to search for radiation-adaptive cellular components. Besides, analyses of biochemical and molecular biological mechanisms for stimulus-stimulating effects of low-dose radiation were accomplished by examining genes and proteins inducible by low-dose radiation. Third, development of functional crop plants using radiation-resistant factors. Changes in stress-tolerance of plants against environmental stress factors such as light, temperature, salinity and UV-B stress after exposed to low-dose gamma-rays were investigated. Concerned reactive oxygen species, antioxidative enzymes, and antioxidants were also analyzed to develop high value-added and environment-friendly functional plants using radiation-resistant factors. These researches are important to elucidate biological activities increased by low-dose radiation and help to provide leading technologies for improvement of domestic productivity in agriculture and development of high value-added genetic resources.

Development of Plant Application Technique of Low Dose Radiation

International Nuclear Information System (INIS)

Chung, Byung Yeoup; Kim, Jae Sung; Lim, Yong Taek

2007-07-01

The project was carried out to achieve three aims. First, development of application techniques of cell-stimulating effects by low-dose radiation. Following irradiation with gamma-rays of low doses, beneficial effects in crop germination, early growth, and yield were investigated using various plant species and experimental approaches. For the actual field application, corroborative studies were also carried out with a few concerned experimental stations and farmers. Moreover, we attempted to establish a new technique of cell cultivation for industrial mass-production of shikonin, a medicinal compound from Lithospermum erythrorhizon and thereby suggested new application fields for application techniques of low-dose radiation. Second, elucidation of action mechanisms of ionizing radiation in plants. By investigating changes in plant photosynthesis and physiological metabolism, we attempted to elucidate physiological activity-stimulating effects of low-dose radiation and to search for radiation-adaptive cellular components. Besides, analyses of biochemical and molecular biological mechanisms for stimulus-stimulating effects of low-dose radiation were accomplished by examining genes and proteins inducible by low-dose radiation. Third, development of functional crop plants using radiation-resistant factors. Changes in stress-tolerance of plants against environmental stress factors such as light, temperature, salinity and UV-B stress after exposed to low-dose gamma-rays were investigated. Concerned reactive oxygen species, antioxidative enzymes, and antioxidants were also analyzed to develop high value-added and environment-friendly functional plants using radiation-resistant factors. These researches are important to elucidate biological activities increased by low-dose radiation and help to provide leading technologies for improvement of domestic productivity in agriculture and development of high value-added genetic resources

Radiation curing: Science and technology

International Nuclear Information System (INIS)

Pappas, S.P.

1992-01-01

The science and technology of radiation curing have progressed substantially within the last 20 years. Nevertheless, radiation-curable compositions typically command relatively small shares in many of their competitive markets. This situation signifies that potential advantages of radiation curing are not generally perceived to overcome their limitations. An important objective of this book is to address this issue, within the scope of the subjects offered, by providing the present state of knowledge and by identifying the directions and challenges for future studies. The first chapter introduces radiation curing. Chapter 2 offers the first systematic presentation of inorganic and organometallic photoinitiators. Chapters 3 and 4 present the analytical techniques of photocalorimetry and real-time infrared spectroscopy, respectively. Recent advances in resin technology are offered in Chapters 5 and 6, which constitute the first comprehensive accounts of (meth)acrylated silicones and vinyl ethers, respectively. Radiation-curable coatings, printing inks, and adhesives are discussed in Chapters 7-9, respectively. Chapter 10 offers a discussion on photopolymer imaging systems

Report on the actual state of the basic, applied research and industrial applications of the radiation in Mexico

International Nuclear Information System (INIS)

Lopez V, H.

1991-07-01

In this report the main works of basic, applied research and industrial applications that are carried out in Mexico, about radiations (radiation chemistry, technology, applications, use and isotope production, etc.): infrastructure, radiation sources, groups and research programs are presented. (Author)

Controlling Radiation Degradation of Natural Polymers for Industrial and Agricultural application

International Nuclear Information System (INIS)

Hegazy, E.A.; AbdEl-Rehim, H

2008-01-01

Radiation induced degradation technology is a new and promising application of ionizing radiation to develop viscose, pulp, paper, food preservation, pharmaceutical production, and natural bioactive agents industries. Controlling the degree of degradation, uniform molecular weight distribution, saving achieved in the chemicals (used in conventional methods) on a cost basis, and environmentally friendly process are the beneficial effects of using radiation technology in these industries. However, for some development countries such technology is not economic. Therefore, a great effort should be done to reduce the cost required for such technologies. One of the principle factors for reducing the cost is achieving the degradation at low irradiation doses. The addition of some additives such as potassium per-sulfate (KPS), ammonium per-sulfate (APS), or H 2O2 to natural polymers such as chitosan and Na-alginate during irradiation process accelerates their degradation. The highest degradation rate of polysaccharides obtained when APS was used. The end product of irradiated chitosan, and Na-alginate may be used as food additive or benefited in agricultural purposes. The prepared crosslinked copolymers possessed high and fast swelling properties in simulated urine media and the swelling ratios of CMC-Na /PAAm gels in urine are acceptable for diaper application. (author)

Creation of new growth engine through proliferating radiation fusion technology

International Nuclear Information System (INIS)

Byun, Myung Woo

2008-01-01

Radiation technology is being used for the decontamination of foods, the breeding of crops and flowers, the sterilization of medical devices, recycling and conservation of wastes and the development of advanced functional materials. The economical scales of radiational industries were higher than 148 billion $ in United States and 64.5 billion $ in Japan, but only 0.15 billion $ in Korea. To promote the radiation industry, the Korean government has legislated the general plans for the promotion of atomic energy and established the Advanced Radiation Technology Institute in Jeongeup. Radiation Fusion Technology (RFT) is an advanced technology which integrates Information Technology, Nano Technology, Bio Technology, Environmental Technology, Space Technology, based on Radiation Technology. RFT is developing highly value-added products and theses outcomes will be industrialized in RFT business valley

Radiation degradation of poly(olefin sulphone)s - Fundamental research to practical applications

International Nuclear Information System (INIS)

Bowden, M.J.; O'Donnell, J.H.

1985-01-01

The degradation of poly(olefin sulphone)s by high energy radiation, particularly by γ-rays and electron beams, provides an example of the application of fundamental science to high technology industry. Scientific interest in the radiation degradation of these polymers was first aroused by the discovery that they underwent highly specific bond scission in the backbone chain as the primary result of absorption of high energy radiation and in fact they were the first polymers in which such an effect had been demonstrated. This conclusion was initially based mainly on evidence from electron spin resonance spectroscopy and was subsequently verified by studies of molecular weight changes. These studies showed that the poly(olefin sulphone)s not only degraded by main chain scission but were also among the most radiation-sensitive polymers known. The extremely high sensitivity of poly(olefin sulphone)s to radiation-induced main-chain scission has found application in the field of microelectronics. Electron beam writing on poly(olefin sulphone) films is used to produce lithographic masks for the manufacture of integrated circuits on silicon wafers. Poly(1-butene sulphone) (PBS) is currently used in the production of a substantial proportion of the masks for the industry. The fundamental aspects of the radiation degradation of poly(olefin sulphone)s and the practical applications to high technology are reviewed. (author)

Proceedings of the first nuclear science and technology conference no. 1. Nuclear science and its application

International Nuclear Information System (INIS)

1986-01-01

This conference contains papers on non-power applications of nuclear technology in agriculture and industry. These applications include irradiation of food for disinfestation and radiopreservation, radiation monitoring, and radiation chemistry important to industrial processes

Optical fibers and their applications for radiation measurements

International Nuclear Information System (INIS)

Kakuta, Tsunemi

1998-01-01

When optical fibers are used in a strong radiation field, it is necessary to increase the radiation-resistant capacity. Aiming at the improvement of such property, the characteristics of recent optical fibers made from quartz-glass were reviewed and the newly developed techniques for radiation measurement using those fibers were summarized in this report. Since optical fibers became able to use in the levels near the core conditions, their applications have started in various fields of technologies related to radiation. By combining the optical fibers and a small sensor, it became possible to act as 'Key Component' for measuring wide range radioactivity from a trace activity to a strong radiation field in the reactor core. Presently, the fibers are utilized for investigation of the optical mechanisms related in radiation, evaluation of their validities so on. Further, the optical fibers are expected to utilize in a multi-parametric measuring system which allows to concomitantly determine the radiation, temperature, pressure, flow amount etc. as an incore monitor. (M.N.)

Optical fibers and their applications for radiation measurements

Energy Technology Data Exchange (ETDEWEB)

Kakuta, Tsunemi [Japan Atomic Energy Research Inst., Tokyo (Japan)

1998-07-01

When optical fibers are used in a strong radiation field, it is necessary to increase the radiation-resistant capacity. Aiming at the improvement of such property, the characteristics of recent optical fibers made from quartz-glass were reviewed and the newly developed techniques for radiation measurement using those fibers were summarized in this report. Since optical fibers became able to use in the levels near the core conditions, their applications have started in various fields of technologies related to radiation. By combining the optical fibers and a small sensor, it became possible to act as `Key Component` for measuring wide range radioactivity from a trace activity to a strong radiation field in the reactor core. Presently, the fibers are utilized for investigation of the optical mechanisms related in radiation, evaluation of their validities so on. Further, the optical fibers are expected to utilize in a multi-parametric measuring system which allows to concomitantly determine the radiation, temperature, pressure, flow amount etc. as an incore monitor. (M.N.)

Radiation technology of improved quality materials production

International Nuclear Information System (INIS)

Zajkin, Yu.A.; Nadirov, N.K.; Zajkina, R.F.

1997-01-01

The technology of materials production from metals and alloys with high operational properties is developed. The technology is based on use of radiation methods in powder metallurgy. Use of radiation processing allows to improve technological conditions of sintering. It is established, that in certain regimes the sintering temperature is decreasing from 1200 deg C up to 950 deg C in the result of radiation processing of stainless steel powders . According to the processing regimes it is possible load reduction by powder pressing on 15-20 % and sintering time in to 1,5 - 2 times . The radiation methods give possibility to produce high qualitative goods from cheap powder materials without use energy-intensive processes and prolonged processing of finished products

Political and social aspects of radiation technology

International Nuclear Information System (INIS)

Smith, S.L.

1990-01-01

The political and social aspects of radiation technology are presented. The importance of radiation processing to economies dependent on the storage, transportation and sale of produce is emphasised. Efforts by pressure groups in Canada, to discredit food irradiation processes are discussed. Methods used to overcome objections to food irradiation and radiation technology by public information and education through the media are presented. (U.K.)

Micro-Mini & Nano-Dosimetry & Innovative Technologies in Radiation Therapy (MMND&ITRO2016)

Science.gov (United States)

2017-01-01

The biennial MMND (formerly MMD) - IPCT workshops, founded in collaboration with Memorial Sloan Kettering Cancer Center (MSKCC) in 2001, has become an important international multidisciplinary forum for the discussion of advanced dosimetric technology for radiation therapy quality assurance (QA) and space science, as well as advanced technologies for prostate cancer treatment. In more recent years, the interests of participants and the scope of the workshops have extended far beyond prostate cancer treatment alone to include all aspects of radiation therapy, radiation science and technology. We therefore decided to change the name in 2016 to Innovative Technologies in Radiation Oncology (ITRO). MMND ITRO 2016 was held on 26-31 January, 2016 at the beautiful Wrest Point Hotel in Hobart, Tasmania and attracted an outstanding international faculty and nearly 200 delegates from 18 countries (http://mmnditro2016.com/) The MMND 2016 program continued to cover advanced medical physics aspects of IMRT, IGRT, VMAT, SBRT, MRI LINAC, innovative brachytherapy, and synchrotron MRT. The demand for sophisticated real time and high temporal and spatial resolution (down to the submillimetre scale) dosimetry methods and instrumentation for end-to-end QA for these radiotherapy technologies is increasing. Special attention was paid to the contribution of advanced imaging and the application of nanoscience to the recent improvements in imaging and radiotherapy. The last decade has seen great progress in charged particle therapy technology which has spread throughout the world and attracted strong current interest in Australia. This demands a better understanding of the fundamental aspects of ion interactions with biological tissue and the relative biological effectiveness (RBE) of protons and heavy ions. The further development of computational and experimental micro-and nano-dosimetry for ions has important application in radiobiology based treatment planning and space radiation

Report of the Consultant’s Meeting on the development of an E-learning system for radiation technologies applications in industry

International Nuclear Information System (INIS)

2014-01-01

The Consultant’s Meeting (CM) on the development of an e-learning system for radiation technologies applications in industry (radiotracers and nucleonic measurement systems) convened at IAEA headquarter in Vienna, Austria, from 27 to 31 January 2014. The meeting was held with 6 experts from Germany, Korea, France, Croatia, Indonesia and Albania to discuss and evaluate issues related to the development of an e-learning system for radiation technologies applications in industry and about the mechanisms for e-learning implementation. The list of participants is attached as Appendix I. The foremost objective of the consultant’s meeting is to prepare a technical document which will provide practical information and guidelines for the development of an e-learning system for radiotracers and sealed source applications in industry. The preparation of a technical report on status and strategy for the development of the e-learning system was the main output of this CM. Nuclear techniques, as tracers and sealed sources applications, have been widely used in various industries to optimize and monitor processes, improve product quality, save energy and materials and reduce environmental impact. Their technical, economic and environmental benefits have been well demonstrated and recognized in many industrial sectors. The major radiotracer and sealed source techniques have been transferred to many developing MS through IAEA TC projects. The usefulness of nuclear techniques in evaluation or trouble shooting industrial processes has been proved beyond doubt. There are many instances, where nuclear techniques based on either open or sealed sources have been used on laboratory and industrial scales to provide solutions to problems which otherwise would have been insoluble

Dictionary of terms and definitions used in radiation protection technology

International Nuclear Information System (INIS)

1975-01-01

The dictionary contains terms and definitions used in radiation protection technology. This document is developed by the Section of CMEA Secretariat on peaceful atomic energy application on the basis of materials provided by member states. The dictionary contains versions of terms and definitions in the languages of member states. Total number of terms is 94. (I.T.)

High temperature, radiation hardened electronics for application to nuclear power plants

International Nuclear Information System (INIS)

Gover, J.E.

1980-01-01

Electronic circuits were developed and built at Sandia for many aerospace and energy systems applications. Among recent developments were high temperature electronics for geothermal well logging and radiation hardened electronics for a variety of aerospace applications. Sandia has also been active in technology transfer to commercial industry in both of these areas

Radiation technology in South Africa

International Nuclear Information System (INIS)

Du Plessis, T.A.

1976-01-01

A review is given of the relatively new field of radiation technology in South Africa. Attention is drawn particularly to the role which radioactive radiation can play in the spheres of medicine, polymer chemistry and agriculture. The possibilities inherent in ionizing radiation in the synthesis of chemicals and new synthetic materials, are dealt with briefly, and the promising results already achieved in the manufacture of polymer-wood are considered [af

Overview and applications of the Monte Carlo radiation transport kit at LLNL

International Nuclear Information System (INIS)

Sale, K. E.

1999-01-01

Modern Monte Carlo radiation transport codes can be applied to model most applications of radiation, from optical to TeV photons, from thermal neutrons to heavy ions. Simulations can include any desired level of detail in three-dimensional geometries using the right level of detail in the reaction physics. The technology areas to which we have applied these codes include medical applications, defense, safety and security programs, nuclear safeguards and industrial and research system design and control. The main reason such applications are interesting is that by using these tools substantial savings of time and effort (i.e. money) can be realized. In addition it is possible to separate out and investigate computationally effects which can not be isolated and studied in experiments. In model calculations, just as in real life, one must take care in order to get the correct answer to the right question. Advancing computing technology allows extensions of Monte Carlo applications in two directions. First, as computers become more powerful more problems can be accurately modeled. Second, as computing power becomes cheaper Monte Carlo methods become accessible more widely. An overview of the set of Monte Carlo radiation transport tools in use a LLNL will be presented along with a few examples of applications and future directions

Application of silicon carbide to synchrotron-radiation mirrors

International Nuclear Information System (INIS)

Takacs, P.Z.; Hursman, T.L.; Williams, J.T.

1983-09-01

Damage to conventional mirror materials exposed to the harsh synchrotron radiation (SR) environment has prompted the SR user community to search for more suitable materials. Next-generation insertion devices, with their attendant flux increases, will make the problem of mirror design even more difficult. A parallel effort in searching for better materials has been underway within the laser community for several years. The technology for dealing with high thermal loads is highly developed among laser manufacturers. Performance requirements for laser heat exchangers are remarkably similar to SR mirror requirements. We report on the application of laser heat exchanger technology to the solution of typical SR mirror design problems. The superior performance of silicon carbide for laser applications is illustrated by various material trades studies, and its superior performance for SR applications is illustrated by means of model calculations

Radiation effects in advanced microelectronics technologies

Science.gov (United States)

Johnston, A. H.

1998-06-01

The pace of device scaling has increased rapidly in recent years. Experimental CMOS devices have been produced with feature sizes below 0.1 /spl mu/m, demonstrating that devices with feature sizes between 0.1 and 0.25 /spl mu/m will likely be available in mainstream technologies after the year 2000. This paper discusses how the anticipated changes in device dimensions and design are likely to affect their radiation response in space environments. Traditional problems, such as total dose effects, SEU and latchup are discussed, along with new phenomena. The latter include hard errors from heavy ions (microdose and gate-rupture errors), and complex failure modes related to advanced circuit architecture. The main focus of the paper is on commercial devices, which are displacing hardened device technologies in many space applications. However, the impact of device scaling on hardened devices is also discussed.

Radiation technologies at INR NASU

International Nuclear Information System (INIS)

Vishnevs'kij, Yi.M.; Sakhno, V.Yi.; Tomchaj, S.P.

2011-01-01

The results of Institute for Nuclear Research of National Academy of Sciences of Ukraine in the development and use of nuclear and radiation technologies applied for a number of scientific, technical and technological projects in the framework of state budget themes, research programs, innovation and scientific and technological national and international programs and projects are presented.

Thermionic integrated circuit technology for high power space applications

International Nuclear Information System (INIS)

Yadavalli, S.R.

1984-01-01

Thermionic triode and integrated circuit technology is in its infancy and it is emerging. The Thermionic triode can operate at relatively high voltages (up to 2000V) and at least tens of amperes. These devices, including their use in integrated circuitry, operate at high temperatures (800 0 C) and are very tolerant to nuclear and other radiations. These properties can be very useful in large space power applications such as that represented by the SP-100 system which uses a nuclear reactor. This paper presents an assessment of the application of thermionic integrated circuitry with space nuclear power system technology. A comparison is made with conventional semiconductor circuitry considering a dissipative shunt regulator for SP-100 type nuclear power system rated at 100 kW. The particular advantages of thermionic circuitry are significant reductions in size and mass of heat dissipation and radiation shield subsystems

Women's viewpoints on radiation and its applications

International Nuclear Information System (INIS)

Iwasaki, Tamiko

2005-01-01

The discoveries of X-ray by W.C. Roentgen and of radium by M. Curie were immediately followed by application of them to medical field. After the World War II, nuclear energy has been used as an energy source on the one hand, and radiations have been also applied to various familiar fields in daily life on the other hand. These are now being developed into essential technologies in our present life. However, many people in general still fear nuclear power and radiation. There are numerous cases clearly indicating a widespread rejection of anything ''nuclear'' in the society as a whole. People in radiation'' community have made great efforts to remove these unfortunate misunderstandings and negative regarding the use of radiation, but these have not been satisfied. In this paper, I would like to reexamine possible factors that have been led to the dissatisfaction and do so from a different perspective from the standpoint of women. (author)

Development of modulators against degenerative aging using radiation fusion technology

Energy Technology Data Exchange (ETDEWEB)

Jo, S. K.; Park, H. R.; Jang, B. S.; Roh, C. H.; Eom, H. S.; Choi, N. H.; Seol, M. A.; Kim, S. H.; Choi, H. M.; Park, M. K.; Shin, H. J.; Ryu, D. K.; Oh, W. J.; Kim, S. H; Yee, S. T.

2012-04-15

1. Objectives Establishment of modelling of degenerative aging using radiation technology Development of aging modulators using radiation degenerative aging model 2. Project results Establishment of the modeling of degenerative aging using radiation technology - The systematic study on the comparison of radiation-induced degeneration and natural aging process in animals and cells confirmed the biological similarity between these two degeneration models - The effective biomarkers were selected for the modelling of degenerative aging using radiation (10 biomarkers for immune/hematopoiesis, 1 for oxidative stress, 6 for molecular signaling, 3 for lipid metabolism) - The optimal irradiation condition was established for the modelling of degerative aging (total 5Gy with fractionation by over 10 times, lapse of over 4 months) - The molecular mechanisms of radiation-induced degeneration were studied including chronic inflammation (lung), inflammation-related lipid metabolism disturbance, mitochondria biogenesis and dynamics - The radiation degenerative model was evaluated with previously known natural substances (resveratrol, EGCG, etc) Development of aging modulators using radiation degenerative aging model - After the screening of about 800 natural herb extracts, 5 effective substances were selected for aging modulation. - 3 candidate compositions were selected from 20 compositions made from effective substances by in vitro evaluation (WAH2, WAH6, WAH7) - 1 composition (WAH6) was selected as the best aging modulator by in vivo evaluation in radiation-induced aging models and degenerative disease models. 3. Expected benefits and plan of application The modelling of degenerative aging using radiation can facilitate the aging research by providing the useful cell/animal models for aging research A large economic benefits are expected by the commercialization of developed aging modulators (over 10 billion KW in 2015.

Development of modulators against degenerative aging using radiation fusion technology

International Nuclear Information System (INIS)

Jo, S. K.; Park, H. R.; Jang, B. S.; Roh, C. H.; Eom, H. S.; Choi, N. H.; Seol, M. A.; Kim, S. H.; Choi, H. M.; Park, M. K.; Shin, H. J.; Ryu, D. K.; Oh, W. J.; Kim, S. H; Yee, S. T.

2012-04-01

1. Objectives Establishment of modelling of degenerative aging using radiation technology Development of aging modulators using radiation degenerative aging model 2. Project results Establishment of the modeling of degenerative aging using radiation technology - The systematic study on the comparison of radiation-induced degeneration and natural aging process in animals and cells confirmed the biological similarity between these two degeneration models - The effective biomarkers were selected for the modelling of degenerative aging using radiation (10 biomarkers for immune/hematopoiesis, 1 for oxidative stress, 6 for molecular signaling, 3 for lipid metabolism) - The optimal irradiation condition was established for the modelling of degerative aging (total 5Gy with fractionation by over 10 times, lapse of over 4 months) - The molecular mechanisms of radiation-induced degeneration were studied including chronic inflammation (lung), inflammation-related lipid metabolism disturbance, mitochondria biogenesis and dynamics - The radiation degenerative model was evaluated with previously known natural substances (resveratrol, EGCG, etc) Development of aging modulators using radiation degenerative aging model - After the screening of about 800 natural herb extracts, 5 effective substances were selected for aging modulation. - 3 candidate compositions were selected from 20 compositions made from effective substances by in vitro evaluation (WAH2, WAH6, WAH7) - 1 composition (WAH6) was selected as the best aging modulator by in vivo evaluation in radiation-induced aging models and degenerative disease models. 3. Expected benefits and plan of application The modelling of degenerative aging using radiation can facilitate the aging research by providing the useful cell/animal models for aging research A large economic benefits are expected by the commercialization of developed aging modulators (over 10 billion KW in 2015

Nuclear and radiation applications in industry: Tools for innovation

International Nuclear Information System (INIS)

Machi, S.; Iyer, R.

1994-01-01

Applications of nuclear and radiation technologies have been contributing to industrial efficiency, energy conservation, and environmental protection for many years. Some of these are: Manufacturing industries: Radiation processing technologies are playing increasing roles during manufacturing of such everyday products as wire and cable, automobile tires, plastic films and sheets, and surface materials. Production processes: Other techniques employing radioisotope gauges are indispensable for on-line thickness measurements during paper, plastic, and steel plate production. Processing and quality checks are made using nucleonic control systems that are common features of industrial production lines. Sterilization of medical products using electron beam accelerators or cobalt-60 radiation is better than the conventional methods. Industrial safety and product quality: Non-destructive examination or testing using gamma- or X-ray radiography is widely used for checking welds, casting, machinery, and ceramics to ensure quality and safety. Additionally, radiotracer techniques are unique tools for the optimization of chemical processes in reactors, leakage detection, and wear and corrosion studies, for example. Environmental protection: An innovative technology using electron beams to simultaneously remove sulfur dioxide (SO 2 ) and nitrogen oxides (NO x ) has been under development. The electron beam technology is very cost competitive and its byproduct can be used as agricultural fertilizer

Small compact pulsed electron source for radiation technologies

International Nuclear Information System (INIS)

Korenev, Sergey

2002-01-01

The small compact pulsed electron source for radiation technologies is considered in the report. The electron source consists of pulsed high voltage Marx generator and vacuum diode with explosive emission cathode. The main parameters of electron source are next: kinetic energy is 100-150 keV, beam current is 5-200 A and pulse duration is 100-400 nsec. The distribution of absorbed doses in irradiated materials is considered. The physical feasibility of pulsed low energy electron beam for applications is considered

Non power applications of nuclear technology: The case of Belgium

International Nuclear Information System (INIS)

Jaumotte, A.L.

1998-01-01

The historical review and oversight of Belgium activities in applications of nuclear technologies has been presented. Especially attention have been paid on industrial applications as sterilization of surgical tools, medical supplies, drugs, food; radiation induced polymerization and composite materials production; nondestructive testing and application of sealed sources in industry. The detailed review has been done on nuclear medicine development in Belgium covering the range of therapeutic applications as well as diagnostic techniques

Radiation therapy technology (radiation therapists) manpower needs 1992 comparison of radiation therapeutic technology education in Europe and the United States 1994

International Nuclear Information System (INIS)

Rominger, C. Jules; Owen, Jean; Thompson, Phyllis; Giordano, Patricia; Buck, Beverly; Hanks, Gerald

1995-01-01

The shortage of radiation therapists (radiation therapy technologists) has existed in the United States for many years. It now appears the supply may be matching the demand. This report analyzes the data from the most recent manpower study from ACR/ASTRO carried out in 1990 using the Patterns of Care Master Facility list. The report is a comparison of these figures with similar figures published in IJROBP in December, 1983. Between 1980 and 1990 the number of radiation therapists rose from 3096 to 5353, an increase of 72%. During this period of time, the number of radiation therapy machines increased 47%, and the number of patients being treated increased 30%. The total number of educational programs in radiation therapy technology increased from 101 in 1989 to 123 in 1993. The total enrollment in these programs grew from 806 in 1989 to 1591 in 1993. The number of first time examinees in radiation therapy technology by ARRT in 1983 was 387 and increased to 943 in 1994. It is apparent that as a result of the increase in the number of radiation therapy educational programs and the more effective recruitment into these program, the supply of graduating radiation therapists has reached the demand. The future needs for entry level radiation therapists should be based on current data as well as new Blue Book standards that are being developed

Radiation processing of natural polymers for industrial and agricultural applications

International Nuclear Information System (INIS)

Hegazy, El-Sayed A.; AbdEl-Rehim, H.; Diaa, D.A.; El-Barbary, A.

2008-01-01

Radiation induced degradation technology is a new and promising application of ionizing radiation to develop viscose, pulp, paper, food preservation, pharmaceutical production, and natural bioactive agents industries. Controlling the degree of degradation, uniform molecular weight distribution, saving achieved in the chemicals (used in conventional methods) on a cost basis, and environmentally friendly process are the beneficial effects of using radiation technology in these industries. However, for some development countries such technology is not economic. Therefore, a great efforts should be done to reduce the cost required for such technologies. One of the principle factors for reducing the cost is achieving the degradation at low irradiation doses. The addition of some additives such as potassium per-sulfate (KPS), ammonium per-sulfate (APS), or H 2 O 2 to natural polymers (carboxymethylcellulose (CMC), chitosan, carrageenan and Na-alginate) during irradiation process accelerates their degradation. The highest degradation rate of polysaccharides obtained when APS was used. The end product of irradiated CMC, chitosan, carrageenan and Na-alginate may be used as food additive or benefited in agricultural purposes. On the other hand, radiation crosslinking of PAAm or PNIPAAm is affected by the presence of natural polymer like CMC-Na and carrageenan due to their degradability which could be controlled according to its concentration in the bulk medium and irradiation dose. Accordingly, the gel content, thermo-sensitivity (LCST) and swelling properties of PNIPAAm based natural polymers could be controlled. The swelling of the prepared copolymer hydrogels was investigated for its possible use in personal care articles particularly diapers or as carriers for drug delivery systems. The prepared crosslinked copolymers possessed high and fast swelling properties in simulated urine media and the swelling ratios of CMC-Na/PAAm gels in urine are acceptable for diaper

Application of radiation chemistry in materials modification and environmental protection

International Nuclear Information System (INIS)

Chmielewski, A.G.

2007-01-01

thermoshrinkable tubes and types possessing '' memory effect ''. Through radiation, grafting metal adsorbents and ion exchange membranes can be developed. Radiation is early applied tool in the area of nanomaterials engineering; arrangement of atoms and ions has been performed using ion or electron beams for many years. New trends concern surface curing and development of ion track membranes and controlled release drug-delivery systems. Finally, radiation processing concerns gem stones colorization, development of high temperature resistant fibers (SiC) and semiconductor modification. Over the past few years, radiation processing technologies aimed at ensuring the safety of gaseous and liquid effluents discharged to the environment have been developed. It has been demonstrated that radiation processing based technologies for flue gas treatment (SO X and NO X removal), wastewater purification, and sludge hygienization can be effectively deployed to mitigate environmental degradation. Electron beam technology is among the most promising advanced technologies of new generation. This is a dry-scrubbing process of simultaneous SO 2 and NO x removal, where no waste except the fertilizer by-product are generated.The other possibility is application of the process for VOC removal. Tests at the pilot plant constructed at a coal-fired power station were performed with the purpose of estimating the influence of electron beam on VOCs present in flue gas, during SO 2 and NO x removal. The removal efficiencies have been ranged from 40% up to 98%. The chlorocarbons including dioxins may be removed with high efficiency as well [57, 58]. During the radiolysis of water reactive radicals of strong oxidizing or reducing properties are formed that can transform the pollutants in the liquids wastes. A large number of substances such as hard surfactants, lignin, pesticides cannot be degraded by conventional biochemical methods and thus escape from decomposition in biological treatment. Research and

Technological yields of sources for radiation processing

International Nuclear Information System (INIS)

Zagorski, Z.P.

1993-01-01

The present report is prepared for planners of radiation processing of any material. Calculations are focused on accelerators of electrons, divided into two groups: versatile linacs of energy up to 13 MeV, and accelerators of lower energy, below 2 MeV, of better energy yield but of limited applications. The calculations are connected with the confrontation of the author's technological expectations during the preparation of the linac project in the late '60s, with the results of 25 years of exploitation of the machine. One has to realize that from the 200 kW input power from the mains, only 5 kW of bent and scanned beam is recovered on the conveyor. That power is only partially used for radiation induced phenomena, because of the demanded homogeneity of the dose, of the mode of packing of the object and its shape, of edges of the scanned area and in the spaces between boxes, and of loses during the idle time due to the tuning of the machine and dosimetric operations. The use of lower energy accelerators may be more economical than that of linacs in case of objects of specific type. At the first stage already, that is of the conversion of electrical power into that of low energy electron beam, the yield is 2-3 times better than in the case of linacs. Attention has been paid to the technological aspects of electron beam conversion into the more penetrating Bremsstrahlung similar to gamma radiation. The advantages of technologies, which make possible a control of the shape of the processed object are stressed. Special attention is focused to the relation between the yield of processing and the ratio between the maximum to the minimum dose in the object under the irradiation. (author). 14 refs, 14 figs

The advances in radiation processing technology and some suggestion

International Nuclear Information System (INIS)

Wu Jilan; Wei Genshuan; Ha Hongfei

1992-01-01

Radiation processing technology has been made great advances in the last decade especially in the developed countries. According to the conservative evaluation, the total sales of radiation processing products approached about 2-3 billion U.S. dollar in 1981, there after, the processing capacity at least doubles. Now, the intensities of 60 Co in use for radiation processing are (5.55-7.40) x 10 18 Bq and there are about 600 sets of electron accelerators for radiation processing. The total sales of radiation processing products are supposed to be over 10 billion U.S. dollar in 1989. However, there are only several fields commercialized. In great scale, such as radiation crosslinked heat shrinkable materials, radiation crosslinked electric cables and wires, and radiation sterilization of medical articles. In China, the radiation processing technology has been developed rapidly in the past years, but the processing capacity is still lower in comparing with developed countries. We suggest that much attention should be devoted to the training of the workers, technicians and managers. The basic theoretical and new technological researches are the keys for developing radiation processing technology at high speed in our country

Innovation Priorities in Nuclear and Radiation Technologies in Russia. View from Skolkovo

International Nuclear Information System (INIS)

Fertman, A.; Kovalevich, D.; Turtikov, V.; Zaytseva, N.

2012-01-01

The direction for the modernization and technological development of 'Nuclear Technologies' sector of the Russian economy comprises a group of scientific and engineering subjects (atomic engineering, technologies on the basis of radiation, change of properties of materials, radiation resistant microelectronics, etc.), and serves as the foundation of one of the most high-tech industries. The innovative development of nuclear technologies is an integral condition for the strengthening (and in some directions of conquering) a country's position as a global technological leader and preservation of defensive capability of the nation. For this reason, nuclear technologies became one of the priority areas for the activity of the Skolkovo Center. The wide opportunities offered by the application of nuclear technologies were already clear at the deployment stage of the 'Nuclear Project - 1'. In 1958, at the 2nd International conference on the peaceful use of nuclear energy in Geneva, the USSR presented more than 200 reports and communiques in all civil use of atomic energy directions.One of the major results of the development of the nuclear branch have become the developments in the sphere of control of radiation and magnetic fields (radiation technologies). This group of technologies have actively developed in collaboration with design and manufacturing of different types of equipment, including accelerators, neutron generators, lasers, HF-systems, detectors of particles and radiation, microscopes and telescopes, microwave microelectronics, etc. Today these technologies and equipment are used in a variety of other (non-power and not military) markets - and the list of these markets grows constantly. Among the fastest growing ones, we can list the markets of nuclear medicine, sterilization and disinfection, safety and non-destructive testing, ecology and water processing, extraction and the processing of minerals. Historically, the development of nuclear technologies

Provision of a draft version for standard classification structure for information of radiation technologies through analyzing their information and derivation of its applicable requirements to the information system

International Nuclear Information System (INIS)

Jang, Sol Ah; Kim, Joo Yeon; Yoo, Ji Yup; Shin, Woo Ho; Park, Tai Jin; Song, Myung Jae

2015-01-01

Radiation technology is the one for developing new products or processes by applying radiation or for creating new functions in industry, research and medical fields, and its application is increasing consistently. For securing an advanced technology competitiveness, it is required to create a new added value by information consumer through providing an efficient system for supporting information, which is the infrastructure for research and development, contributed to its collection, analysis and use with a rapidity and structure in addition to some direct research and development. Provision of the management structure for information resources is especially crucial for efficient operating the system for supporting information in radiation technology, and then a standard classification structure of information must be first developed as the system for supporting information will be constructed. The standard classification structure has been analyzed by reviewing the definition of information resources in radiation technology, and those classification structures in similar systems operated by institute in radiation and other scientific fields. And, a draft version of the standard classification structure has been then provided as 7 large, 25 medium and 71 small classifications, respectively. The standard classification structure in radiation technology will be developed in 2015 through reviewing this draft version and experts' opinion. Finally, developed classification structure will be applied to the system for supporting information by considering the plan for constructing this system and database, and requirements for designing the system. Furthermore, this structure will be designed in the system for searching information by working to the individual need of information consumers

Provision of a draft version for standard classification structure for information of radiation technologies through analyzing their information and derivation of its applicable requirements to the information system

Energy Technology Data Exchange (ETDEWEB)

Jang, Sol Ah; Kim, Joo Yeon; Yoo, Ji Yup; Shin, Woo Ho; Park, Tai Jin; Song, Myung Jae [Korean Association for Radiation Application, Seoul (Korea, Republic of)

2015-02-15

Radiation technology is the one for developing new products or processes by applying radiation or for creating new functions in industry, research and medical fields, and its application is increasing consistently. For securing an advanced technology competitiveness, it is required to create a new added value by information consumer through providing an efficient system for supporting information, which is the infrastructure for research and development, contributed to its collection, analysis and use with a rapidity and structure in addition to some direct research and development. Provision of the management structure for information resources is especially crucial for efficient operating the system for supporting information in radiation technology, and then a standard classification structure of information must be first developed as the system for supporting information will be constructed. The standard classification structure has been analyzed by reviewing the definition of information resources in radiation technology, and those classification structures in similar systems operated by institute in radiation and other scientific fields. And, a draft version of the standard classification structure has been then provided as 7 large, 25 medium and 71 small classifications, respectively. The standard classification structure in radiation technology will be developed in 2015 through reviewing this draft version and experts' opinion. Finally, developed classification structure will be applied to the system for supporting information by considering the plan for constructing this system and database, and requirements for designing the system. Furthermore, this structure will be designed in the system for searching information by working to the individual need of information consumers.

Radiation cross-linked polymers: Recent developments and new applications

International Nuclear Information System (INIS)

Rouif, Sophie

2005-01-01

The purpose of the present paper is to review the innovative and recent applications of radiation cross-linking of polymers that reinforces their dimensional stability in chemically aggressive and high temperature conditions. Radiation cross-linking can be applied to a great number of plastics: thermoplastics, elastomers and thermoplastic elastomers (TPE). Some of them can cross-link on their own, some others need to be formulated with a cross-linking agent (promoter) or to be modified during their polymerization. Some results of chemical and thermomechanical characterizations of radiation cross-linked plastics based on engineering polymers will be described, and their advantages will be emphasized in relation with their applications in various sectors: pipes and cables, packaging, automotive, electrical engineering and electronics, including connectors, surface mounted devices, integrated circuits, 3D-MID technology, etc. The paper will conclude with a short review of the industrial irradiation facilities (EB facilities and gamma plants) adapted to the treatment of such various products

Synchrotron radiation applications in medical research

International Nuclear Information System (INIS)

Thomlinson, W.

1995-01-01

The medical projects employing synchrotron radiation as discussed in this paper are, for the most part, still in their infancies and no one can predict the direction in which they will develop. Both the basic research and applied medical programs are sure to be advanced at the new facilities coming on line, especially the ESRF and Spring- 8. However, success is not guaranteed. There is a lot of competition from advances in conventional imaging with the development of digital angiography, computed tomography, functional magnetic resonance imaging and ultrasound. The synchrotron programs will have to provide significant advantages over these modalities in order to be accepted by the medical profession. Advances in image processing and potentially the development of compact sources will be required in order to move the synchrotron developed imaging technologies into the clinical world. In any event, it can be expected that the images produced by the synchrotron technologies will establish ''gold standards'' to be targeted by conventional modalities. A lot more work needs to be done in order to bring synchrotron radiation therapy and surgery to the level of human studies and, subsequently, to clinical applications

Modification of biomolecules and combined actions by radiation

International Nuclear Information System (INIS)

Kim, Jin Kyu; Lee, J. W.; Kim, J. H.; Choi, J. I.; Song, B. S.; Kim, J. K.; Park, J. H.; Lee, Y. J.; Ryu, S. H.; Sung, N. Y.; Cha, M. K.; Nam, J. Y.; Park, J. Y.; Cho, E. R.; Ryu, T. H.

2011-12-01

Advanced Radiation Technology Institute is a government-supported institute for radiation research and application. It has focused on development of fundamentals for radiation applications based on the existing radiation technology, and on enhancement of biological effectiveness of radiation through theoretical approach to the combined actions of radiation with another factor. Application of radiation technology together with the existing technologies to enhance the physical, chemical, biological characteristics through modification of biomolecules resulted in creation of de novo materials of scientific and industrial values. A theoretical model for combined action of radiation with another physico-chemical factor has been established. Conclusively the results of this study can provide scientific bases for maximizing the efficacy of ionizing radiation in relation to industrial applications

A new era in nuclear energy science. When will radiation application receive citizenship ranking along with energy utilization

International Nuclear Information System (INIS)

Tabata, Yoneho; Tagawa, Seiichi; Saito, Naoki; Fujii, Yasuhiko

2005-01-01

Japan has been obtaining definite results in these decades in both fields of nuclear power generation (energy utilization) and radiation application thus contributing to a sustainable development of the world. The present special issue of 'Atom Eye' introduces (1) Japanese achievements in cooperative relationships with developing countries in the field of radiation applications, (2) history of research and development of radiation-utilization techniques in Japan, (3) present status of quantum-beam applications in life-science, medial application, and nano-technology, etc, (4) applications of high-intensity neutron source, (5) cancer therapy using high-energy heavy-ion beams, (6) radiation sterilizations, (7) radiation mutations, (8) three interviewer's reports visiting several research institutes of radiation applications in Japan, and introduction of (9) a bencher enterprise and also (10) an accelerator business. (S. Ohno)

Proceedings of the Second International Conference on Radiation Sciences and Application

International Nuclear Information System (INIS)

2010-04-01

The publication has been set up as proceedings of the Radiation Sciences and Application conference. the conference consistes of Chemistry; Food Sciences and Technology; Entomolgy; Biology; Waste Management; Safety and Microbiology. This conference consists of one volume and 360 pages., figs., tabs., refs.

Present status of application of radiation and radioisotopes in Bangladesh

International Nuclear Information System (INIS)

Hossain, Anwar

1984-01-01

Bangladesh has proceeded with the atomic energy programme in three phases: (1) research and development using radiation and radioisotopes and application of the results, (2) building the infrastructure in nuclear technology and (3) production of electricity from nuclear sources and development of associated facilities. It has entered the second phase of the programme. The following main areas of research and application were referred to: agriculture, food preservation, medical sterilization and radiation biology, medicine, non-destructive testing, isotope hydrology, elemental analysis, particle-induced x-ray emission (PIXE) methods, radioisotope-induced x-ray fluorescence (RIXFA) methods, flame atomic absorption spectrophotometric (AAS) methods, molecular absorption and fluorescence spectroscopy, health physics, and future programme with research reactor. (Namekawa, K.)

Radiation applications research and facilities in AECL research company

Science.gov (United States)

Iverson, S. L.

In the 60's and 70's Atomic Energy of Canada had a very active R&D program to discover and develop applications of ionizing radiation. Out of this grew the technology underlying the company's current product line of industrial irradiators. With the commercial success of that product line the company turned its R&D attention to other activities. Presently, widespread interest in the use of radiation for food processing and the possibility of developing reliable and competitive machine sources of radiation hold out the promise of a major increase in industrial use of radiation. While many of the applications being considered are straightforward applications of existing knowledge, others depend on more subtle effects including combined effects of two or more agents. Further research is required in these areas. In March 1985 a new branch, Radiation Applications Research, began operations with the objective of working closely with industry to develop and assist the introduction of new uses of ionizing radiation. The Branch is equipped with appropriate analytical equipment including HPLC (high performance liquid chromatograph) and GC/MS (gas chromatograph/mass spectrometer) as well as a Gammacell 220 and an I-10/1, one kilowatt 10 MeV electron accelerator. The accelerator is located in a specially designed facility equipped for experimental irradiation of test quantities of packaged products as well as solids, liquids and gases in various configurations. A conveyor system moves the packaged products from the receiving area, through a maze, past the electron beam at a controlled rate and finally to the shipping area. Other necessary capabilities, such as gamma and electron dosimetry and a microbiology laboratory, have also been developed. Initial projects in areas ranging from food through environmental and industrial applications have been assessed and the most promising have been selected for further work. As an example, the use of charcoal adsorbent beds to concentrate

Radiation protection. Scientific fundamentals, legal regulations, practical applications. Compendium

International Nuclear Information System (INIS)

Buchert, Guido; Gay, Juergen; Kirchner, Gerald; Michel, Rolf; Niggemann, Guenter; Schumann, Joerg; Wust, Peter; Jaehnert, Susanne; Strilek, Ralf; Martini, Ekkehard

2011-06-01

The compendium on radiation protection, scientific fundamentals, legal regulations and practical applications includes contributions to the following issues: (1) Effects and risk of ionizing radiation: fundamentals on effects and risk of ionizing radiation, news in radiation biology, advantages and disadvantages of screening investigations; (2) trends and legal regulations concerning radiation protection: development of European and national radiation protection laws, new regulations concerning X-rays, culture and ethics of radiation protection; (3) dosimetry and radiation measuring techniques: personal scanning using GHz radiation, new ''dose characteristics'' in practice, measuring techniques for the nuclear danger prevention and emergency hazard control; (4) radiation exposure in medicine: radiation exposure of modern medical techniques, heavy ion radiotherapy, deterministic and stochastic risks of the high-conformal photon radiotherapy, STEMO project - mobile CT for apoplectic stroke patients; (5) radiation exposure in technology: legal control of high-level radioactive sources, technical and public safety using enclosed radioactive sources for materials testing, radiation exposure in aviation, radon in Bavaria, NPP Fukushima-Daiichi - a status report; (6) radiation exposure in nuclear engineering: The Chernobyl accident - historical experiences or sustaining problem? European standards for radioactive waste disposal, radioactive material disposal in Germany risk assessment of ionizing and non-ionizing radiation (7) Case studies.

Review of advanced catheter technologies in radiation oncology brachytherapy procedures

OpenAIRE

Zhou J; Zamdborg L; Sebastian E

2015-01-01

Jun Zhou,1,2 Leonid Zamdborg,1 Evelyn Sebastian1 1Department of Radiation Oncology, Beaumont Health System, 2Oakland University William Beaumont School of Medicine, Royal Oak, MI, USA Abstract: The development of new catheter and applicator technologies in recent years has significantly improved treatment accuracy, efficiency, and outcomes in brachytherapy. In this paper, we review these advances, focusing on the performance of catheter imaging and reconstruction techniques in brachytherapy ...

Radiation processing of polymers and semiconductors at the Institute of Nuclear Chemistry and Technology

International Nuclear Information System (INIS)

Zimek, Z.; Przybytniak, G.; Kaluska, I.

2006-01-01

R(and)D studies in the field of radiation technology in Poland are mostly concentrated at the Institute of Nuclear Chemistry and Technology (INCT). The results of the INCT works on polymer and semiconductor modification have been implemented in various branches of national economy, particularly in industry and medicine. Radiation technology for polymer modification was implemented in the middle of the 1970-ties. Among others, the processes of irradiation and heat shrinkable products expansion have been developed. The transfer of this technology to Polish industry was performed in the middle of the 1980-ties. The present study aims at the formulation of new PE composites better suited to new generation of heat shrinkable products, for example, a new generation of hot-melt adhesives has been developed to meet specific requirements of customers. Modified polypropylene was used for the production of medical devices sterilized by radiation, especially disposable syringes, to overcome the low radiation resistance of the basic material. Modified polypropylene (PP-M) has been formulated at the INCT to provide material suitable for medical application and radiation sterilization process. Modification of semiconductor devices by EB was applied on an industrial scale since 1978 when the INCT and the LAMINA semiconductor factory successfully adopted that technology to improve specific semiconductor devices. This activity is continued on commercial basis where the INCT facilities served to contract irradiation of certain semiconductor devices according to the manufacturing program of the Polish factory and customers from abroad. (author)

Radiation hardening of InP solar cells for space applications

International Nuclear Information System (INIS)

Vilela, M. F.; Freundlich, A.; Monier, C.; Newman, F.; Aguilar, L.

1998-01-01

The aim of this work is to develop a radiation resistant thin InP-based solar cells for space applications on more mechanically resistant, lighter, and cheaper substrates. In this paper, we present the development of a p + /nn + InP-based solar cell structures with very thin emitter and base layers. A thin emitter helps to increase the collection of carriers generated by high energy incident photons from the solar spectrum. The use of a thin n base structure should improve the radiation resistance of this already radiation resistant technology. A remarkable improvement of high energy photons response is shown for InP solar cells with emitters 400 A thick

Development of optical thin film technology for lasers and synchrotron radiation

International Nuclear Information System (INIS)

Apparao, K.V.S.R.; Bagchi, T.C.; Sahoo, N.K.

1985-01-01

Dielectric multilayer optical thin film devices play an important role not only in the working of lasers but also in different front line research activities using high power lasers and high intensity synchrotron radiation sources. Facilities are set up recently in the Spectroscopy Division to develop the optical thin film design and fabrication technologies indigeneously. Using the facilities thin film devices for different laser applications working in the wavelength range from 300 nm to 1064 nm were developed. Different technical aspects involved in the technology development are briefly described. (author)

Application of radiation nowadays

International Nuclear Information System (INIS)

Habibah Adnan

2009-01-01

Despite of scientist know about radiation since 1890, but they have successfully developed many of application to help human life. Now, we can see that radiation was applied in medical, academic, industrial, and generating electricity. Besides that, radiations also have other applications that can help in agriculture activities, archaeology, legislation, geology, space exploration and many more. In hospital, doctor use nuclear medicine to trace, monitor and save almost thousands of people every year. According to research, 7 out of 10 American citizens had already use this services at least once in their life. Universities, college, secondary school, research center also use nuclear material in their laboratory. For example, through research, radiation can help in plants study, agriculture technique, soils study and others. Industrial sector are one sector that applied radiation widely. For example, radiation can kill almost 80 % bacteria or dangerous microorganism in food or export products. Nowadays, radiation cannot be curtailed although it can give more benefit more than risk. It depends on how we manage it.

Technologically modified exposures to natural radiation. Annex C

International Nuclear Information System (INIS)

1982-01-01

This Annex deals with some examples of technologically modified exposures to natural radiation. Radiation exposures due to coal-fired power plants, geothermal energy production, exploitation of phosphate rock, aircraft travel, and consumer products are discussed. The present state of knowledge does not allow an accurate estimate of the collective effective dose equivalent from technologically modified exposures to natural radiation to be made. This annex has an extensive bibliography with at least 200 references.

Efficiency of application of instantaneous radiation of seeds by plasma

International Nuclear Information System (INIS)

Tsyganov, A.R.; Gordeev, Yu.A.; Poddubnaya, O.V.

2009-01-01

The efficiency of application of instantaneous (impulse) radiation of seeds of spring wheat (Triticum aestivum) and oat (Avena sativa) by plasma was analyzed. Research results showed that presowing treatment of seeds with instantaneous helium radiation in course of 0,01 seconds (the total duration of seed treatment with plasmatron ion source impulses – one second). In course of the practical experiments there was proved possibility of application impulse radiation technologies in modern agricultural production. Seed germination capacity exceeded the control variants on 14%. Results of influence of applied irradiation on length of sprouts, length of roots and their germinating ability were presented. Irradiation efficiency developed in course of plant vegetation. In accordance with research results and accumulated experimental material on presowing seed treatment with impulses of low temperature helium plasma could make it possible to obtain yields with higher capacity and quality with the minimal expenses for seed treatment

The preliminary research for biosynthetic engineering by radiation fusion technology

Energy Technology Data Exchange (ETDEWEB)

Roh, Chang Hyun; Jung, U Hee; Park, Hae Ran [KAERI, Daejeon (Korea, Republic of)

2012-01-15

The purpose of this project is to elucidate the solution to the production of bioactive substance using biotransformation process from core technology of biosynthetic engineering by radiation fusion technology. And, this strategy will provide core technology for development of drugs as new concept and category. Research scopes and contents of project include 1) The development of mutant for biosynthetic engineering by radiation fusion technology 2) The development of host for biosynthetic engineering by radiation fusion technology 3) The preliminary study for biosynthetic engineering of isoflavone by radiation fusion technology. The results are as follows. Isoflavone compounds(daidzein, hydroxylated isoflavone) were analyzed by GC-MS. The study of radiation doses and p-NCA high-throughput screening for mutant development were elucidated. And, it was carried out the study of radiation doses for host development. Furthermore, the study of redox partner and construction of recombinant strain for region-specific hydroxylation(P450, redox partner). In addition, the biological effect of 6,7,4'-trihydroxyisoflavone as an anti-obesity agent was elucidated in this study.

Megavoltage radiation therapy: Meeting the technological needs

International Nuclear Information System (INIS)

Van Dyk, J.

2002-01-01

Full text: In its simplest description, the purpose of radiation therapy is to hit the target and to miss all other parts of the patient. While there are multiple technological methods available for doing this, the actual radiation treatment needs to be considered in the broader context of the total radiation treatment process. This process contains multiple steps, each of which has an impact on the quality of the treatment and on the possible clinical outcome. One crucial step in this process is the determination of the location and extent of the disease relative to the adjacent normal tissues. This can be done in a variety of ways, ranging from simple clinical examination to the use of complex 3-D imaging, sometimes aided by contrast agents. As part of this localization process, it is very important that patient immobilization procedures be implemented to ensure that the same patient position will be used during both the planning and the daily treatment stages. With the knowledge of the location of the target and the critical tissues, decisions can be made about the appropriate beam arrangements to provide adequate tumour coverage while sparing the healthy tissues. This beam arrangement may have to be confirmed on a therapy simulator prior to actual implementation of the radiation treatment. In summary, the treatment process includes diagnosis, patient immobilization, target and normal tissue localization, beam selection, beam shaping, dose calculation, technique optimization, simulation, prescription, treatment verification and, finally, treatment. Dependent on the type of disease, it is not necessary that every patient undergoes all of the steps in the process; however, it is necessary that each step of the process used for a particular patient be carried out with the greatest accuracy. Uncertainties at any stage of the process will be carried through to subsequent stages and have an impact on clinical outcome. It is, therefore, important to recognize, when

Application of large radiation sources in Asia and the Pacific - a review

International Nuclear Information System (INIS)

Iya, V.K.

1977-01-01

The current status of the applications of large radiation sources on industrial scale in the countries of Asia and the Pacific Region has been reviewed. The present R and D programmes and the major centres engaged in these programmes are described. So far as commercialization is considered, radiation processing industry is now well established in Japan, Australia, India and Israel. The major industrial uses of large radiation sources have been for : (1) sterilization of medical products, (2) food preservation, (3) cross-linking of polyethylene and (4) production of composite materials from polymer and wood or bamboo or bagasse. A table is given which indicates the current status of clearance of irradiated food in the countries under consideration. Finally, technological requirements in these countries for development and application of radiation processing are spelled out and discussed. (M.G.B.)

Application of ionizing radiation for metal nanoclusters synthesis

International Nuclear Information System (INIS)

Smietanko-Chmielewska, D.K.; Chmielewski, A.G.; Warsaw University of Technology, Warsaw

2011-01-01

Complete text of publication follows. Possibility of ionizing radiation application in nanotechnology has been observed from very beginning when this field of science and technology was named. The lithography is based on electron and ion beam applications, and metal clusters synthesis by radiation induced radicals was reported many years ago. International Atomic Energy Agency was the first organization which has started coordinated programs on radiation applications in nanotechnology which are being continued in the frame of regional cooperation project RER8014. Some of applications led to patented technical solutions. Then review papers and chapters in the books have been published. The main applications beside of lithography deal with metal nanoclusters and nano-composites synthesis. Polymer composites containing metal nanoparticles have attracted a great interest due to their unique chemical and physical properties. 'Green' chemistry promotes application of natural fibers in such structures, among them cellulose is one of the most frequently used. However, cellulose fabric have ability to absorb moisture, so under certain conditions of humidity and temperature they can be subjected to microbial attack. One of the most popular and best known antibacterial agents is silver, which serves as a potential antibacterial material acting against an exceptionally broad spectrum of bacteria including activity against antibiotic-resistant bacteria. Silver nanoparticles (Ag NPs) were grown at the cellulose fibers surface by direct reduction of AgNO 3 with electron beam (EB) application. The big field of development concerns nano composites, possibility of e/X units application enlarge this possibility to industrial scale product manufacturing. Acknowledgement: This work was supported by the IAEA, regional project RER/8/014 and by the Ministry of Science and Higher Education, project DPN/W14/IAEA/2009.

Technological challenges of third generation synchrotron radiation sources

International Nuclear Information System (INIS)

Cornacchia, M.; Winick, H.

1990-01-01

New ''third generation'' synchrotron radiation research facilities are now in construction in France, Italy, Japan, Taiwan and the USA. Designs for such facilities are being developed in several other countries. Third generation facilities are based on storage rings with low electron beam emittance and space for many undulator magnets to produce radiation with extremely high brightness and coherent power. Photon beam from these rings will greatly extend present research capabilities and open up new opportunities in imaging, spectroscopy, structural and dynamic studies and other applications. The technological problems of the third generation of synchrotron radiation facilities are reviewed. These machines are designed to emit radiation of very high intensity, extreme brightness, very short pulses, and partial coherence. These performance goals put severe requirements on the quality of the electron or positron beams. Phenomena affecting the injection process and the beam lifetime are discussed. Gas desorption by synchrotron radiation and collective effects play an important role. Low emittance lattices are more sensitive to quadrupole movements and at the same time, in order not to lose the benefits of high brilliance, require tighter tolerances on the allowed movement of the photon beam source. We discuss some of the ways that should be considered to extend the performance capabilities of the facilities in the future. 14 refs., 1 fig

Results of the activities of the Scientific and Technical Coordination Council for Radiation Technique and Technology

Energy Technology Data Exchange (ETDEWEB)

Sille, A K [Gosudarstvennyj Komitet po Ispol' zovaniyu Atomnoj Ehnergii SSSR, Moscow

1977-03-01

It is reported on the activities of the Scientific and Technical Coordination Council for Radiation Technique and Technology (STCC-RTT) of the CMEA Permanent Commission for the Peaceful Uses of Atomic Energy according to the programme 1971 to 1975. The STCC-RTT is concerned with technical applications such as radiation sterilization, food irradiation, radiation-induced chemical processes etc. The main tasks which have to be solved within the period from 1976 to 1980 are outlined.

Radiation technologies and techniques friendly for environment and men

International Nuclear Information System (INIS)

Chmielewski, A.G.; Walis, L.

1995-01-01

Development of radiation technologies and techniques in Poland has been shown. Especially thermoshrinkable olefins with shape memory, fast thermistors and radiation sterilization have been presented. Also the radiometric gages produced in the Institute of Nuclear Chemistry and Technology, Warsaw for air monitoring have been described. A broad group of radiotracer techniques being used for environmental study have been presented as well. Radiation technologies with electron beam use for flue gas purification, sewage sludge hygienization and food processing have been shown and their development has been discussed

Radiation Tolerant Design with 0.18-micron CMOS Technology

CERN Document Server

Chen, Li; Durdle , Nelson G.

This thesis discusse s th e issues r elated to the us e of enclosed-gate layou t trans isto rs and guard rings in a 0.18 μ m CMOS technology in order to im prove the radiation tolerance of ASICs. The thin gate oxides of subm icron technologies ar e inherently m ore radiation tole rant tha n the thick er oxides present in less advanced technologies. Using a commercial deep subm icron technology to bu ild up radiation-ha rdened circuits introduces several advantages com pared to a dedicated radiation-ha rd technology, such as speed, power, area, stability, and expense. Som e novel aspects related to the use of encl osed-gate layout transist ors are presented in this th esis. A m odel to calculate the aspect ratio is introduced and verified. Some im portant electrica l par ameters of the tran sistors such as threshold voltage, leakage current, subthreshold slope, and transconducta nce are studied before and afte...

Technological aspects of the radiation chemistry

International Nuclear Information System (INIS)

Chmielewski, A.G.

2006-01-01

Main technological aspects of the radiation chemistry are reviewed: network formation in polymers and caoutchouc, production of the sterile hydrogels, sterilisation of the expendable medical equipment and the environmental protection technologies (e.g. purification of the combustion gases from the sulfur oxides). Achievements of the are reviewed Institute of Nuclear Chemistry and Technology, Warsaw (Poland) in these fields are presented

Selected finelings on current research into applications of ionizing radiation in food industry

International Nuclear Information System (INIS)

Salkova, Z.

1979-01-01

A review is presented of research of the application of ionizing radiation in the food industry, mainly for the inhibition of potato and onion germination and for radappertization of soft fruits. Current laws governing the irradiation of food are described and the current knowledge of the practical application of the new technology is indicated. (author)

International Conference on Development and Applications of Nuclear Technologies (NUTECH-2011). Book of Abstracts

International Nuclear Information System (INIS)

Dudala, J.; Stegowski, Z.

2011-01-01

The main object of the International Conference on Development and Applications of Nuclear Technologies - NUTECH (Cracow, 11-14 September 2011) is to bring together scientists working on the development and application of nuclear technologies and to discuss further research fulfilling the needs of modern society. In the conference participate over 160 researchers from about 20 countries - among them from USA, France, Germany, Italy, Republic of South Africa, Japan, China, Brazil and South Korea . Book of Abstracts covers over 170 presentations - 13 plenary lectures, 42 section lectures and 118 posters. Thy provide information about possibilities and results of the applications of nuclear technologies in the modern economy of the 21 th century and cover the following topics: (a) nuclear energy in Poland; (b) applications of nuclear techniques; (c) nuclear energy and management of radioactive wastes; (d) radiation chemistry; (e) dosimetry and radiation protection; (f) environmental studies; (g) radiotherapy; (h) radiometric measurements; (i) radiopharmaceuticals and radioisotope production; (j) characterization of materials; (k) biomedical studies; (l) nuclear techniques in preserving cultural heritage; (m) applications of nuclear technologies in agriculture and food processing; (n) technological developments. The conference refers to 100-anniversary of the Nobel Prize in Chemistry for Maria Sklodowska-Curie. The conference is organized by Faculty of Physics and Applied Computer Science, AGH University of Science and Technology and Institute of Nuclear Chemistry and Technology. It is financially supported by Polish Energy Group Nuclear Energy S.A. (PGE, Energia Jadrowa), Polish Nuclear Society (PTN), International Atomic Energy Agency, National Atomic Agency (PAA), European Nuclear Society and Municipality of Cracow.

International Conference on Development and Applications of Nuclear Technologies (NUTECH-2011). Book of Abstracts

Energy Technology Data Exchange (ETDEWEB)

Dudala, J; Stegowski, Z [ed.

2011-07-01

The main object of the International Conference on Development and Applications of Nuclear Technologies - NUTECH (Cracow, 11-14 September 2011) is to bring together scientists working on the development and application of nuclear technologies and to discuss further research fulfilling the needs of modern society. In the conference participate over 160 researchers from about 20 countries - among them from USA, France, Germany, Italy, Republic of South Africa, Japan, China, Brazil and South Korea . Book of Abstracts covers over 170 presentations - 13 plenary lectures, 42 section lectures and 118 posters. Thy provide information about possibilities and results of the applications of nuclear technologies in the modern economy of the 21{sup th} century and cover the following topics: (a) nuclear energy in Poland; (b) applications of nuclear techniques; (c) nuclear energy and management of radioactive wastes; (d) radiation chemistry; (e) dosimetry and radiation protection; (f) environmental studies; (g) radiotherapy; (h) radiometric measurements; (i) radiopharmaceuticals and radioisotope production; (j) characterization of materials; (k) biomedical studies; (l) nuclear techniques in preserving cultural heritage; (m) applications of nuclear technologies in agriculture and food processing; (n) technological developments. The conference refers to 100-anniversary of the Nobel Prize in Chemistry for Maria Sklodowska-Curie. The conference is organized by Faculty of Physics and Applied Computer Science, AGH University of Science and Technology and Institute of Nuclear Chemistry and Technology. It is financially supported by Polish Energy Group Nuclear Energy S.A. (PGE, Energia Jadrowa), Polish Nuclear Society (PTN), International Atomic Energy Agency, National Atomic Agency (PAA), European Nuclear Society and Municipality of Cracow.

Report of research and investigation committee for infrared radiation heating technology. Sekigai hosha kanetsu gijutsu kenkyu chosa iinkai hokoku

Energy Technology Data Exchange (ETDEWEB)

Matsui, M. (Fukuyama Univ., Hiroshima (Japan). Faculty of Engineering)

1994-07-01

The committee was established in July 1990 for research and investigation of infrared (IR) heating technology and finished its activity in March 1993. This report describes the committee members and the results of research and investigation. (1) Application of IR radiation (sensing): the research and investigation results were reported on the following items; the recognition of letters and patterns on cultural properties by IR radiation, the passive sensor (detecting the IR radiated from the object without emitting from the sensor), the IR image system, and the diagnosis of outer wail of buildings. (2) The following were researched on the IR radiation source and IR emitting material; multi-functional heating element having far infrared radiation function and deodorant function, the emissivity of far IR radiation, and the evaluation of the functions by the difference in emissivity. (3) The IR heating technology was described on the following: drying the persimmon using far IR radiation, the present situation of research on IR heating done by foreign power supply companies, and the feature and the application of far IR heater. In addition to these, the following were also reported; (4) measurement of IR radiation and (5) effect of living body and organism.

Wireless Technology Use Case Requirement Analysis for Future Space Applications

Science.gov (United States)

Abedi, Ali; Wilkerson, DeLisa

2016-01-01

This report presents various use case scenarios for wireless technology -including radio frequency (RF), optical, and acoustic- and studies requirements and boundary conditions in each scenario. The results of this study can be used to prioritize technology evaluation and development and in the long run help in development of a roadmap for future use of wireless technology. The presented scenarios cover the following application areas: (i) Space Vehicles (manned/unmanned), (ii) Satellites and Payloads, (iii) Surface Explorations, (iv) Ground Systems, and (v) Habitats. The requirement analysis covers two parallel set of conditions. The first set includes the environmental conditions such as temperature, radiation, noise/interference, wireless channel characteristics and accessibility. The second set of requirements are dictated by the application and may include parameters such as latency, throughput (effective data rate), error tolerance, and reliability. This report provides a comprehensive overview of all requirements from both perspectives and details their effects on wireless system reliability and network design. Application area examples are based on 2015 NASA Technology roadmap with specific focus on technology areas: TA 2.4, 3.3, 5.2, 5.5, 6.4, 7.4, and 10.4 sections that might benefit from wireless technology.

Proceedings of the 2nd Mediterranean Conference on Information Technology Applications (ITA '97)

International Nuclear Information System (INIS)

Spyrou, S.

1997-01-01

This is the proceedings of the 2nd Mediterranean Conference on Information Technology Applications, held in Nicosia, Cyprus, between 6-7 November, 1997. It contains 16 papers. Two of these fall within the scope of INIS and are dealing with Telemetry, Radiation Monitoring, Environment Monitoring, Radiation Accidents, Air Pollution Monitoring, Diagnosis, Computers, Radiology and Data Processing

Proceedings of the 2nd Mediterranean Conference on Information Technology Applications (ITA `97)

Energy Technology Data Exchange (ETDEWEB)

Spyrou, S [ed.

1998-12-31

This is the proceedings of the 2nd Mediterranean Conference on Information Technology Applications, held in Nicosia, Cyprus, between 6-7 November, 1997. It contains 16 papers. Two of these fall within the scope of INIS and are dealing with Telemetry, Radiation Monitoring, Environment Monitoring, Radiation Accidents, Air Pollution Monitoring, Diagnosis, Computers, Radiology and Data Processing.

Radiation applications in industry and medicine: DAE fostering availability, quality and safety of products and service

International Nuclear Information System (INIS)

Ramamoorthy, N.

2016-01-01

Nuclear and radiation applications play a significant role in aiding industrial process management, food security and safety, health care practices, manufacturing and value-addition to certain materials, treating pollutants/waste, etc. Most of these applications have contributed to improving the quality of life and industrial efficiency. India is among the large-scale producers cum users of radioisotope products and radiation technology applications over the past nearly five decades, thanks to the Department of Atomic Energy (DAE) and its various units pioneering the development and deployment of the above-mentioned applications in our country

Radiation processing technology for preparation of fine shaped biomedical materials

Energy Technology Data Exchange (ETDEWEB)

Kumakura, M.; Yoshida, M.; Asano, M. (Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment); Yamanaka, H. (Gunma Univ., Maebashi (Japan). School of Medicine)

1992-06-01

Radiation processing technology for the preparation of fine shaped biomedical materials was studied from the aspect of a development of the technology and its application. Electron beam irradiation technology was applied to the preparation of fine shaped biomedical materials such as thin polymer films in diagnosis, in which enzyme and antibody were used as a bioactive substance. Electron beam cast-polymerization and electron beam repeat surface-polymerization, that are surface irradiation techniques of homogeneous hydrophilic monomer solution containing enzymes made it possible to form the immobilized antibody films. In this technique, the films with various thicknesses (50-500 [mu]m) were obtained by regulating the electron beam energy. The thin polymer films immobilizing anti-[alpha]-fetoprotein were evaluated from the aspect of immunoagents for diagnosis of liver cancer. (Author).

High-power free-electron lasers-technology and future applications

Science.gov (United States)

Socol, Yehoshua

2013-03-01

Free-electron laser (FEL) is an all-electric, high-power, high beam-quality source of coherent radiation, tunable - unlike other laser sources - at any wavelength within wide spectral region from hard X-rays to far-IR and beyond. After the initial push in the framework of the “Star Wars” program, the FEL technology benefited from decades of R&D and scientific applications. Currently, there are clear signs that the FEL technology reached maturity, enabling real-world applications. E.g., successful and unexpectedly smooth commissioning of the world-first X-ray FEL in 2010 increased in one blow by more than an order of magnitude (40×) wavelength region available by FEL technology and thus demonstrated that the theoretical predictions just keep true in real machines. Experience of ordering turn-key electron beamlines from commercial companies is a further demonstration of the FEL technology maturity. Moreover, successful commissioning of the world-first multi-turn energy-recovery linac demonstrated feasibility of reducing FEL size, cost and power consumption by probably an order of magnitude in respect to previous configurations, opening way to applications, previously considered as non-feasible. This review takes engineer-oriented approach to discuss the FEL technology issues, keeping in mind applications in the fields of military and aerospace, next generation semiconductor lithography, photo-chemistry and isotope separation.

Status and prospect of radiation processing technology in Malaysia

Energy Technology Data Exchange (ETDEWEB)

Khairul Zaman Hj. Mohd Dahlan; Nahrul Khair Alang Md Rashid [Malaysian Institute for Nuclear Technology Research (MINT), Bangi, Selangor Darul Ehsan (Malaysia)

2001-03-01

Radiation processing technology in Malaysia is gaining acceptance by the local industry. The technology has proven to enhance the industrial efficiency, productivity and improve product quality and competitiveness. For many years, variety of radiation crosslinkable materials based on synthetic polymers have been produced either in the form of thermoplastic resins, polymer blends or composites. Today, effort is being focused towards producing environmentally friendly and biodegradable materials using natural polymers. The government of Malaysia through the Malaysian Institute for Nuclear Technology Research (MINT) has developed research program to utilize indigenous materials such as natural rubber, palm oil and polysaccharide. Radiation processing technology is used to process (crosslink/grafting/curing) the materials at a competitive cost. This technology can be applied in several industrial sectors such as automobile, aerospace, construction and healthcare. (author)

Status and prospect of radiation processing technology in Malaysia

International Nuclear Information System (INIS)

Khairul Zaman Hj Mohd Dahlan; Nahrul Khair Alang Md Rashid

2001-01-01

Radiation processing technology in Malaysia is gaining acceptance by the local industry. The technology has proven to enhance the industrial efficiency, productivity and improve product quality and competitiveness. For many years, variety of radiation crosslinkable materials based on synthetic polymers have been produced either in the form of thermoplastic resins, polymer blends or composites. Today, effort is being focused towards producing environmentally friendly and biodegradable materials using natural polymers. The government of Malaysia through the Malaysian Institute for Nuclear Technology Research (MINT) has developed research program to utilize indigenous materials such as natural rubber, palm oil and polysaccharide. Radiation processing technology is used to process (crosslink/grafting/curing) the materials at a competitive cost. This technology can be applied in several industrial sectors such as automobile, aerospace, construction and healthcare. (author)

Development of microfluidic devices for biomedical applications of synchrotron radiation infrared microspectroscopy

OpenAIRE

Birarda, Giovanni

2011-01-01

2009/2010 ABSTRACT DEVELOPMENT OF MICROFLUIDIC DEVICES FOR BIOMEDICAL APPLICATIONS OF SYNCHROTRON RADIATION INFRARED MICROSPECTROSCOPY by Birarda Giovanni The detection and measurement of biological processes in a complex living system is a discipline at the edge of Physics, Biology, and Engineering, with major scientific challenges, new technological applications and a great potential impact on dissection of phenomena occurring at tissue, cell, and sub cellular level. The ...

Innovative Applications in Radiation Processing

International Nuclear Information System (INIS)

Vroom, D.A.

2006-01-01

Prior to acquisition by Tyco International, Raychem Corporation initiated several programs to develop new products, reduce the production cost of existing products and identify new market areas that would utilize the skills available in the company in the area of radiation chemistry and radiation technology. Several areas were considered including radiation initiation of specific chemical reactions in polymers at high temperatures, the use of purpose built irradiation equipment for low cost production of specific high volume products and environmental remediation of ground or waste water. In this regard, the Corporation supported a program to improve how material is processed through an electron accelerator and to develop specific equipment to utilize these improvements. The goal was to make the radiation process a single entity as opposed to an accelerator and a material handling system. This paper discusses some of the developments from this program. In the area of radiation induced chemical reactions in polymers at elevated temperatures, a robust accelerator was developed that would allow the irradiation of polymeric materials in the melt as they exited forming equipment such as plastics extruders. Here the goal was to have a low energy, self shielded accelerator in the 300 KeV to 500 KeV range in which extruded polymeric material could be immediately processed in a single pass at melt temperature before it was cooled and allowed to encounter any surfaces. Two machines that met these criteria were constructed and will be discussed. Several of the innovations coming from the high processing temperature, single pass accelerator project were incorporated into the development of purpose built machines to process specific existing products such as wire and heat shrink tubing. Here the goal was to have machines with the minimum acceptable electron energy and compact shielding to reduce cost and foot print. Beam scanning technology developed will be discussed. A major

Micro-Mini and Nano-Dosimetry and Innovative Technologies in Radiation Therapy (MMND and ITRO2016)

International Nuclear Information System (INIS)

2017-01-01

The biennial MMND (formerly MMD) - IPCT workshops, founded in collaboration with Memorial Sloan Kettering Cancer Center (MSKCC) in 2001, has become an important international multidisciplinary forum for the discussion of advanced dosimetric technology for radiation therapy quality assurance (QA) and space science, as well as advanced technologies for prostate cancer treatment. In more recent years, the interests of participants and the scope of the workshops have extended far beyond prostate cancer treatment alone to include all aspects of radiation therapy, radiation science and technology. We therefore decided to change the name in 2016 to Innovative Technologies in Radiation Oncology (ITRO). MMND ITRO 2016 was held on 26-31 January, 2016 at the beautiful Wrest Point Hotel in Hobart, Tasmania and attracted an outstanding international faculty and nearly 200 delegates from 18 countries (http://mmnditro2016.com/) The MMND 2016 program continued to cover advanced medical physics aspects of IMRT, IGRT, VMAT, SBRT, MRI LINAC, innovative brachytherapy, and synchrotron MRT. The demand for sophisticated real time and high temporal and spatial resolution (down to the submillimetre scale) dosimetry methods and instrumentation for end–to-end QA for these radiotherapy technologies is increasing. Special attention was paid to the contribution of advanced imaging and the application of nanoscience to the recent improvements in imaging and radiotherapy. The last decade has seen great progress in charged particle therapy technology which has spread throughout the world and attracted strong current interest in Australia. This demands a better understanding of the fundamental aspects of ion interactions with biological tissue and the relative biological effectiveness (RBE) of protons and heavy ions. The further development of computational and experimental micro-and nano-dosimetry for ions has important application in radiobiology based treatment planning and space radiation

Progress of radiation curing technology and its industrial applications in Japan

International Nuclear Information System (INIS)

Takashi Ukachi

2007-01-01

The Japanese industry has grown with annual growth rate 108%. Electric parts and devices industry strongly promoted Japanese economy. UV/EB curing market in Japan enjoyed its steady growth with an annual growth rate 107%. By realizing the advantages of good performance and high functionality, the UV/EB curing technology has expanded its application field especially in leading edge industries, such as electric parts and devices, FPDs, Optical fibers and cables, optical recording media, and their fabrication and manufacturing. This paper summarizes the Japanese UV/EB market situation and overviews the latest progress of UV/EB technology. (Author)

Radiation chemistry in nuclear technology

International Nuclear Information System (INIS)

Katsumura, Yosuke

2006-01-01

The importance of radiation chemistry in the field of nuclear technology including reactor chemistry, spent fuel reprocessing and radioactive high level waste repository, is summarized and, in parallel, our research activity will be briefly presented. (author)

Development of advanced natural polymer using radiation technology

International Nuclear Information System (INIS)

Kang, Phil Hyun; Nho, Young Chang; Jeon, Jun Pyo

2012-01-01

This project was performed to develop the environment-friendly and higher value-added materials using natural polymers derivatives from biotic-resources by radiation technology. To study for structural change of natural polymer by radiation, the effect of electron beam and Gamma ray into four kinds of plants such as Kenaf core, kenaf bast, ock and cornhusk was investigated. As results of analysis about structural change of natural polymer by radiation, efficiently separating process of Lignin was developed by improved decomposition of Lignin with increasing power of radiation. Environ-friendly separating process of Cellulose and Lignin using radiation and water-cook was developed without toxically chemical treatment. Papers were fabricated by cellulose and tensile strength of pulp fabricated by radiation was invested properties of pulp depending on power of radiation. High purity cellulose was fabricated by reduced chemical ratio between hemi-cellulose and Lignin with control of radiative power. Manufacturing process of natural paper highly containing cellulose content was developed using efficient separation of cellulose from ock tree, kenaf core and kenaf bast through radiation technique. Cellulose fiber was fabricated using separated cellulose by radiation through the drying and wetting spinning with methanol and water. Also nano-fiber with Lignin was made by electro-spinning with different ratio between PAN and Lignin. Effect of thermal treatment and carbonization of fabricated nano-fiber was invested. Carbon fiber with Lignin was applied to high value-added a secondary battery used as a cathode in half cell type. The secondary battery with carbon fiber with Lignin used as a cathode showed very efficient performance, which revealed capacity-preservation with 100% during 100 cycles. This project could significantly contribute to national competitiveness with radiation technology and Low-carbon and green-growth industrial technology, based on securement of

Radiation chemistry and its application

International Nuclear Information System (INIS)

Majima, Tetsuro

2013-01-01

Effects of radiation to human body have been seriously discussed nowadays. These are important issues for the realization of sustainable society. It should be emphasized that various reactive intermediates generated by radiation play important roles in each cases. Radiation chemical studies will provide various reaction-mechanistic aspects on these important issues. Our research group has continuously carried out reaction-mechanistic studies using radiation chemical methods. From these studies, we have obtained a variety of results on basic molecular systems, reactions, materials that are close to practical application, biological systems and so on. Reactive species are generated from the radiation reactions in solution, and can be used as one-electron oxidative and reductive reagent to give selectively radical cation and anion of solute molecules such as various organic and inorganic molecules. Therefore, the radiation chemistry has contributed significantly to chemistry in which one-electron oxidation and reduction play the important role. The kinetics of such redox processes and the following reduction play the important role. The kinetics of such redox processes and the following reactions can be studied in real time with the transition absorption measurement by the pulse radiolysis technique. Even though the target compounds cannot be oxidized and reduced in chemical or electrochemical oxidation and reduction, their one-electron redox can be performed by the electron beam radiation. Therefore, radiation chemistry is very useful technique for basic science. Moreover, application potentials of radiation chemistry are so high for various research subjects. Moreover, application potentials of radiation chemistry are so high for various research subjects

Radiation technology for environmental conservation

International Nuclear Information System (INIS)

Machi, S.

1983-01-01

The use of radiation technology for environmental conservation is becoming increasingly important. Commercial plants for the radiation treatment of sewage sludge to reduce pathogenic micro-organisms have been operating in the Federal Republic of Germany for the past ten years and their technical and economical feasibility has been demonstrated. Irradiation of dried sludge has been developed at the Sandia National Laboratory (USA) using Cs-137, and the construction of a commercial plant is planned in Albuquerque. At the Japan Atomic Energy Research Institute (JAERI), efforts are under way to increase the rate of composting of sludge by radiation. Regarding waste water treatment, a significant synergistic effect of radiation and ozone was found in the reduction of TOC. The construction of a gamma irradiation plant is in the planning stage in Canada, for the disinfection of virus-contaminated waste effluents from the Canadian Animal Disease Research Institute. The treatment of exhaust gases by electron beam has been studied in Japan using a large pilot plant which demonstrated that 90% of SO 2 and 80% of NOsub(x) can be removed from the flue gas of iron ore sintering furnaces. The US Department of Energy is assisting in projects for the further development of this technology for combined removal of SO 2 and NOsub(x) in flue gas from coal burning power stations. (author)

Radiation treatment of materials - elaboration bases of radiation technology; Obrobka radiacyjna materialow - zasady opracowywania technologii

Energy Technology Data Exchange (ETDEWEB)

Panta, P P [Institute of Nuclear Chemistry and Technology, Warsaw (Poland)

1997-10-01

The basic rules in design of radiation technologies have been presented and discussed. The recommendations for achieving of assigned goal in respect of obliged regulations have been done and explained on the example of radiation technology of adhesive materials and glue production.

Application of radiation and radioisotopes in life science

International Nuclear Information System (INIS)

Nakanishi, Tomoko M.

2005-01-01

Radiation and Radioisotopes have been played an important role in the wide range of life science, from the field study, such as fertilizer or pesticide development or production of new species, to gene engineering researches. Many mutants through radiation have been provided to the market and the usage of radioactive tracers was an effective tool to study plant physiology. It has been granted that the contribution of radioisotopes has been accelerated the development of the gene engineering technology, which is now overwhelming all the other usages of radiation or radioisotopes. However, because of the difficulty to get social acceptance for gene modified plants, the orientation of the life science is now changing towards, so called ''post genome era''. Therefore, from the point of radiation or radioisotope usage, new application methods are needed to develop new type of researches. We present how (1) neutron activation analysis, (2) neutron radiography and (3) positron emission tomography are promising to study living plant physiology. Some of these techniques are not necessarily new methods but with a little modification, they show new aspects of plant activity. (author)

Advances in ''radiation processing''. Repeat of a symposium

International Nuclear Information System (INIS)

Drawe, H.

1984-01-01

A symposium entitled ''International Meeting on Radiation Processing'' was held in Dubrovnik from 4th to 8th October, 1982. The current status of and the most recent developments in the field of radiation chemistry were presented. In the report presented here the reader is given a critical review of papers presented at the meeting, the following aspects being treated: Radiation measurements and quality control; radiation source technology; environmental application of radiation technology; radiation chemistry as related to nuclear technology; developments in applied polymer chemistry; radiation sterilization; radiation technological aspects in the food industry; low energy electron radiation applications; applied radiation chemistry and physics; bio-compatible materials, radiation plants; engineering economics and process optimization. (orig./RB) [de

Development of Radiation Breeding Technology of Macroalgae

Energy Technology Data Exchange (ETDEWEB)

Choi, Jongil; Park, J. H.; Song, B. S.; Kim, J. K.; Kim, J. H.; Lee, H. J.; Yang, H. Y.

2013-01-15

Macroalgae has been utilized as food material from long time ago, and recently newly recognized as functional materials and the source of bio-fuel. But, the study on the macroalgae is just beginning and the study on radiation effect and radiation breeding technology was not reported. In this study, the effect of radiation on the macroalgae Porphyra was investigated for the development of new mutant strains. Prphyra was successively cultivated in the laboratory chamber with optimized growth condition. Also, the radiation sensitivity of Porphyra was determined. To develop the mutant strain, irradiated Porphyra strains were screened for better growth and higher resistance against oxidative stress. The selected Porphyra was further cultivated in ocean site. Also, several genes from mutant Porphyra was heterologous expressed and studied for its dunctionality. This results can provide mutation technology of macroalgae and further contribute in the activation of fishery industry and national health enhancement.

Development of Radiation Breeding Technology of Macroalgae

International Nuclear Information System (INIS)

Choi, Jongil; Park, J. H.; Song, B. S.; Kim, J. K.; Kim, J. H.; Lee, H. J.; Yang, H. Y.

2013-01-01

Macroalgae has been utilized as food material from long time ago, and recently newly recognized as functional materials and the source of bio-fuel. But, the study on the macroalgae is just beginning and the study on radiation effect and radiation breeding technology was not reported. In this study, the effect of radiation on the macroalgae Porphyra was investigated for the development of new mutant strains. Prphyra was successively cultivated in the laboratory chamber with optimized growth condition. Also, the radiation sensitivity of Porphyra was determined. To develop the mutant strain, irradiated Porphyra strains were screened for better growth and higher resistance against oxidative stress. The selected Porphyra was further cultivated in ocean site. Also, several genes from mutant Porphyra was heterologous expressed and studied for its dunctionality. This results can provide mutation technology of macroalgae and further contribute in the activation of fishery industry and national health enhancement

Applications of EPR in radiation research

CERN Document Server

Lund, Anders

2014-01-01

Applications of EPR in Radiation Research is a multi-author contributed volume presented in eight themes: I. Elementary radiation processes (in situ and low temperature radiolysis, quantum solids); II: Solid state radiation chemistry (crystalline, amorphous and heterogeneous systems); III: Biochemistry, biophysics and biology applications (radicals in biomaterials, spin trapping, free-radical-induced DNA damage); IV: Materials science (polymeric and electronic materials, materials for treatment of nuclear waste, irradiated food); V: Radiation metrology (EPR-dosimetry, retrospective and medical

Nuclear science in the 20th century. Radiation chemistry and radiation processing

International Nuclear Information System (INIS)

Fu Tao; Xu Furong; Zheng Chunkai

2003-01-01

The application of nuclear science and technology to chemistry has led to two important subjects, radiation chemistry and radiation processing, which are playing important roles in many aspects of science and society. We review the development and major applications of radiation chemistry and radiation processing, including the basic physical and chemical mechanisms involved

Physico-chemical Study of Some Prepared Dyed Films and Possible Application as Radiation Dosimetry Monitors

International Nuclear Information System (INIS)

Salem, A.S.A.

2015-01-01

Radiation processing, a relatively young industry dating from the mid 1950s, has prospered and continues to grow rapidly. The sterilization of medical products by radiation was demonstrated earlier and accounts for a considerable proportion of the industry establishing itself soundly during the 1970s. The radiation processing of polymers and food treatment by radiation have been thoroughly investigated and are important aspects of study. Radiation technology is now well established and is contributing to the industrial development, thus playing its legitimate role, taking into account the total value of the products treated with ionizing radiation, the economic scale of this technology is enormous. Some well established applications like sterilization, and polymers and semiconductors modification are in common use. This is especially true for health care products in industrial countries like the USA and Canada, where it is estimated that more than half of these products is currently sterilized using ionizing radiation

Application of emission CT on nano-robot radiation imaging tracing and isotope sign in nano-robot

International Nuclear Information System (INIS)

Wang Xuewu; Cheng Jianping; Kang Kejun

2000-01-01

Nano-technology has been a scientific and technical frontier with major trends foreseen in several disciplines. Nano-robot is the most remarkable imagination of the application of nano-technology. And it should be concerned of tracing technology along with nano-robot. The character of nano-robot is deeply analyzed, the development status of emission CT is integrated, and the application of emission CT on nano-robot radiation imaging tracing is discussed. The isotope sign of nano-robot is especially calculated and analyzed

Physics through the 1990s: scientific interfaces and technological applications

International Nuclear Information System (INIS)

1986-01-01

The volume examines the scientific interfaces and technological applications of physics. Twelve areas are dealt with: biological physics--biophysics, the brain, and theoretical biology; the physics-chemistry interface--instrumentation, surfaces, neutron and synchrotron radiation, polymers, organic electronic materials; materials science; geophysics--tectonics, the atmosphere and oceans, planets, drilling and seismic exploration, and remote sensing; computational physics--complex systems and applications in basic research; mathematics--field theory and chaos; microelectronics--integrated circuits, miniaturization, future trends; optical information technologies--fiber optics and photonics; instrumentation; physics applications to energy needs and the environment; national security--devices, weapons, and arms control; medical physics--radiology, ultrasonics, NMR, and photonics. An executive summary and many chapters contain recommendations regarding funding, education, industry participation, small-group university research and large facility programs, government agency programs, and computer database needs

Space situational awareness satellites and ground based radiation counting and imaging detector technology

International Nuclear Information System (INIS)

Jansen, Frank; Behrens, Joerg; Pospisil, Stanislav; Kudela, Karel

2011-01-01

We review the current status from the scientific and technological point of view of solar energetic particles, solar and galactic cosmic ray measurements as well as high energy UV-, X- and gamma-ray imaging of the Sun. These particles and electromagnetic data are an important tool for space situational awareness (SSA) aspects like space weather storm predictions to avoid failures in space, air and ground based technological systems. Real time data acquisition, position and energy sensitive imaging are demanded by the international space weather forecast services. We present how newly developed, highly miniaturized radiation detectors can find application in space in view of future SSA related satellites as a novel space application due to their counting and imaging capabilities.

Space situational awareness satellites and ground based radiation counting and imaging detector technology

Energy Technology Data Exchange (ETDEWEB)

Jansen, Frank, E-mail: frank.jansen@dlr.de [DLR Institute of Space Systems, Robert-Hooke-Str. 7, 28359 Bremen (Germany); Behrens, Joerg [DLR Institute of Space Systems, Robert-Hooke-Str. 7, 28359 Bremen (Germany); Pospisil, Stanislav [Czech Technical University, IEAP, 12800 Prague 2, Horska 3a/22 (Czech Republic); Kudela, Karel [Slovak Academy of Sciences, IEP, 04001 Kosice, Watsonova 47 (Slovakia)

2011-05-15

We review the current status from the scientific and technological point of view of solar energetic particles, solar and galactic cosmic ray measurements as well as high energy UV-, X- and gamma-ray imaging of the Sun. These particles and electromagnetic data are an important tool for space situational awareness (SSA) aspects like space weather storm predictions to avoid failures in space, air and ground based technological systems. Real time data acquisition, position and energy sensitive imaging are demanded by the international space weather forecast services. We present how newly developed, highly miniaturized radiation detectors can find application in space in view of future SSA related satellites as a novel space application due to their counting and imaging capabilities.

Scattered radiation from applicators in clinical electron beams

International Nuclear Information System (INIS)

Battum, L J van; Zee, W van der; Huizenga, H

2003-01-01

In radiotherapy with high-energy (4-25 MeV) electron beams, scattered radiation from the electron applicator influences the dose distribution in the patient. In most currently available treatment planning systems for radiotherapy this component is not explicitly included and handled only by a slight change of the intensity of the primary beam. The scattered radiation from an applicator changes with the field size and distance from the applicator. The amount of scattered radiation is dependent on the applicator design and on the formation of the electron beam in the treatment head. Electron applicators currently applied in most treatment machines are essentially a set of diaphragms, but still do produce scattered radiation. This paper investigates the present level of scattered dose from electron applicators, and as such provides an extensive set of measured data. The data provided could for instance serve as example input data or benchmark data for advanced treatment planning algorithms which employ a parametrized initial phase space to characterize the clinical electron beam. Central axis depth dose curves of the electron beams have been measured with and without applicators in place, for various applicator sizes and energies, for a Siemens Primus, a Varian 2300 C/D and an Elekta SLi accelerator. Scattered radiation generated by the applicator has been found by subtraction of the central axis depth dose curves, obtained with and without applicator. Scattered radiation from Siemens, Varian and Elekta electron applicators is still significant and cannot be neglected in advanced treatment planning. Scattered radiation at the surface of a water phantom can be as high as 12%. Scattered radiation decreases almost linearly with depth. Scattered radiation from Varian applicators shows clear dependence on beam energy. The Elekta applicators produce less scattered radiation than those of Varian and Siemens, but feature a higher effective angular variance. The scattered

Industrial radiation and radioisotope gauging techniques and applications

International Nuclear Information System (INIS)

Gardner, R.P.

1997-01-01

The radiation and radioisotope gauging industry in the United States has primarily followed a path of development solely by the private sector. It has remained highly proprietary in nature, which is opposite to the path taken by many other countries. In other countries radiation gauge development has been controlled in large part by government-sponsored research and development, which has spawned many more publications in the open literature. Historically, some of the leaders have been Great Britain, Poland, France, Russia, and Australia. This has possibly led to the misconception that the development of this technology is being dominated by countries outside the United States. This is not a healthy situation-it would be good to see our industry begin to publish more in the open literature and to sponsor more research at universities. In efforts to promote more open-literature publication, the American Nuclear Society (ANS) sponsored a topical meeting on Industrial Radiation and Radioisotope Measurement Applications (IRRMA) in 1988 that was held again in 1992

NASA technology applications team: Applications of aerospace technology

Science.gov (United States)

1993-01-01

This report covers the activities of the Research Triangle Institute (RTI) Technology Applications Team for the period 1 October 1992 through 30 September 1993. The work reported herein was supported by the National Aeronautics and Space Administration (NASA), Contract No. NASW-4367. Highlights of the RTI Applications Team activities over the past year are presented in Section 1.0. The Team's progress in fulfilling the requirements of the contract is summarized in Section 2.0. In addition to our market-driven approach to applications project development, RTI has placed increased effort on activities to commercialize technologies developed at NASA Centers. These Technology Commercialization efforts are summarized in Section 3.0. New problem statements prepared by the Team in the reporting period are presented in Section 4.0. The Team's transfer activities for ongoing projects with the NASA Centers are presented in Section 5.0. Section 6.0 summarizes the status of four add-on tasks. Travel for the reporting period is described in Section 7.0. The RTI Team staff and consultants and their project responsibilities are listed in Appendix A. Appendix B includes Technology Opportunity Announcements and Spinoff! Sheets prepared by the Team while Appendix C contains a series of technology transfer articles prepared by the Team.

Radiation Detection for Homeland Security Applications

Science.gov (United States)

Ely, James

2008-05-01

In the past twenty years or so, there have been significant changes in the strategy and applications for homeland security. Recently there have been significant at deterring and interdicting terrorists and associated organizations. This is a shift in the normal paradigm of deterrence and surveillance of a nation and the `conventional' methods of warfare to the `unconventional' means that terrorist organizations resort to. With that shift comes the responsibility to monitor international borders for weapons of mass destruction, including radiological weapons. As a result, countries around the world are deploying radiation detection instrumentation to interdict the illegal shipment of radioactive material crossing international borders. These efforts include deployments at land, rail, air, and sea ports of entry in the US and in European and Asian countries. Radioactive signatures of concern include radiation dispersal devices (RDD), nuclear warheads, and special nuclear material (SNM). Radiation portal monitors (RPMs) are used as the main screening tool for vehicles and cargo at borders, supplemented by handheld detectors, personal radiation detectors, and x-ray imaging systems. This talk will present an overview of radiation detection equipment with emphasis on radiation portal monitors. In the US, the deployment of radiation detection equipment is being coordinated by the Domestic Nuclear Detection Office within the Department of Homeland Security, and a brief summary of the program will be covered. Challenges with current generation systems will be discussed as well as areas of investigation and opportunities for improvements. The next generation of radiation portal monitors is being produced under the Advanced Spectroscopic Portal program and will be available for deployment in the near future. Additional technologies, from commercially available to experimental, that provide additional information for radiation screening, such as density imaging equipment, will

Nuclear technology and societal needs

International Nuclear Information System (INIS)

2004-11-01

This volume aims to review the present status of development of nuclear technologies and their applications in the country and also to make projections for future requirements. This will also cover state-of-the-art technologies in these areas. The following topics are covered in detail: nuclear technologies for water desalination, water resources development and management using nuclear technology, industrial applications of isotopes and radiation technology, radiation technology in health care, nuclear technology for food preservation, agricultural applications of nuclear technology. Papers relevant to INIS are indexed separately

Radiation protection in newer imaging technologies

International Nuclear Information System (INIS)

Rehani, M. M.

2010-01-01

Not even a week passes without a paper getting published in peer reviewed journals on radiation protection in newer imaging technologies that either did not exist 10 y ago or were not established for routine use. Computed tomography (CT) happens to be a common element in most of these technologies. Radiation protection is high on the agenda of manufacturers and researchers and that is becoming a driving force for users and international organisations. The media and thus the public have their own share in increasing the momentum. The slice war seems to be shifting to dose war. Manufacturers are now chasing the target of sub-mSv CT. The era of two digit mSv effective dose for a CT procedure is far from losing ground, although cardiac CT within 5 mSv seems possible. A few years ago the change in technology was faster than adoption of dose management but currently even the development of dose reduction techniques is faster than its adoption. There is dearth of large scale surveys of practice and lack of surveys with change in technology. (authors)

Sinusoids theory and technological applications

CERN Document Server

Kythe, Prem K

2014-01-01

A Complete Treatment of Current Research Topics in Fourier Transforms and Sinusoids Sinusoids: Theory and Technological Applications explains how sinusoids and Fourier transforms are used in a variety of application areas, including signal processing, GPS, optics, x-ray crystallography, radioastronomy, poetry and music as sound waves, and the medical sciences. With more than 200 illustrations, the book discusses electromagnetic force and sychrotron radiation comprising all kinds of waves, including gamma rays, x-rays, UV rays, visible light rays, infrared, microwaves, and radio waves. It also covers topics of common interest, such as quasars, pulsars, the Big Bang theory, Olbers' paradox, black holes, Mars mission, and SETI.The book begins by describing sinusoids-which are periodic sine or cosine functions-using well-known examples from wave theory, including traveling and standing waves, continuous musical rhythms, and the human liver. It next discusses the Fourier series and transform in both continuous and...

Application of maximum radiation exposure values and monitoring of radiation exposure

International Nuclear Information System (INIS)

1993-01-01

According to the Section 32 of the Radiation Act (592/91) the Finnish Centre for Radiation and Nuclear Safety gives instructions concerning the monitoring of the radiation exposure and the application of the dose limits in Finland. The principles to be applied to calculating the equivalent and the effective doses are presented in the guide. Also the detailed instructions on the application of the maximum exposure values for the radiation work and for the natural radiation as well as the instructions on the monitoring of the exposures are given. Quantities and units for assessing radiation exposure are presented in the appendix of the guide

THz waves: biological effects, industrial and medical applications. Meeting of the non-ionizing radiation section of the French radiation protection society (SFRP). Conference review

International Nuclear Information System (INIS)

Souques, M.; Magne, I.

2011-01-01

Following the debates about body scanners installed in airports for passengers security control, the non-ionizing radiations (NIR) section of the French radiation protection society (SFRP) has organized a conference day to take stock of the present day knowledge about the physical aspects and the biological effects of this frequency range as well as about their medical, and industrial applications (both civil and military). This document summarizes the content of the different presentations: THz spectro-imaging technique: status and perspectives (P. Mounaix); THz technology: seeing the invisible? (J.P. Caumes); interaction of millimeter waves with living material: from dosimetry to biological impacts (Y. Le Drean and M. Zhadobov); Tera-Hertz: biological and medical applications (G. Gallot); Tera-Hertz: standards and recommendations (B. Veyret); Biological applications of THz radiation: a review of events and a glance to the future (G.P. Gallerano); Industrial and military applications - liquids and solids detection in the THz domain (F. Garet); THz radiation and its civil and military applications - gas detection and quantifying (G. Mouret); Body scanners and civil aviation security (J.C. Guilpin). (J.S.)

Operation of commercially-based microcomputer technology in a space radiation environment

Science.gov (United States)

Yelverton, J. N.

This paper focuses on detection and recovery techniques that should enable the reliable operation of commercially-based microprocessor technology in the harsh radiation environment of space and at high altitudes. This approach is especially significant in light of the current shift in emphasis (due to cost) from space hardened Class-S parts qualification to a more direct use of commercial parts. The method should offset some of the concern that the newer high density state-of-the-art RISC and CISC microprocessors can be used in future space applications. Also, commercial aviation, should benefit, since radiation induced transients are a new issue arising from the increased quantities of microcomputers used in aircraft avionics.

Detectors in Medicine and Biology: Applications of Detectors in Technology, Medicine and Other Fields

CERN Document Server

Lecoq, P

2011-01-01

Detectors in Medicine and Biology in 'Applications of Detectors in Technology, Medicine and Other Fields', part of 'Landolt-Börnstein - Group I Elementary Particles, Nuclei and Atoms: Numerical Data and Functional Relationships in Science and Technology, Volume 21B2: Detectors for Particles and Radiation. Part 2: Systems and Applications'. This document is part of Part 2 'Principles and Methods' of Subvolume B 'Detectors for Particles and Radiation' of Volume 21 'Elementary Particles' of Landolt-Börnstein - Group I 'Elementary Particles, Nuclei and Atoms'. It contains the Section '7.1 Detectors in Medicine and Biology' of Chapter '7 Applications of Detectors in Technology; Medicine and Other Fields' with the content: 7.1 Detectors in Medicine and Biology 7.1.1 Dosimetry and medical imaging 7.1.1.1 Radiotherapy and dosimetry 7.1.1.2 Status of medical imaging 7.1.1.3 Towards in-vivo molecular imaging 7.1.2 X-Ray radiography and computed tomography (CT) 7.1.2.1 Different X-Ray imaging modalities 7.1.2.2 Detec...

Expectations for prospective applications of new beam technology to atomic energy research

International Nuclear Information System (INIS)

Tomimasu, Takio; Yamazaki, Tetsuo; Tanaka, Ryuichi; Tanigawa, Shoichiro; Konashi, Kenji; Mizumoti, Motoharu.

1991-01-01

Recently, the new beam technology based on high energy electron beam, for example free electron laser, low speed positrons and so on, has developed remarkably. Moreover, also in the field of ion beams, toward the utilization of further high level, the plans of using micro-beams, heightening energy, increasing electric current and so on are in progress. In near future, it is expected that the advanced application of such new beam technology expands more and more in the fields of materials, physical properties, isotope separation, biology, medical science, medical treatment and so on. In this report, placing emphasis on the examples of application, the development and application of new beam technology are described. Takasaki ion accelerators for advanced radiation application in Japan Atomic Energy Research Institute, the generation of low speed positrons and the utilization for physical property studies, the annihilation treatment of long life radioactive nuclides, and the generation of free electron laser and its application are reported. (K.I.)

Assessment of foreign decommissioning technology with potential application to US decommissioning needs

International Nuclear Information System (INIS)

Allen, R.P.; Konzek, G.J.; Schneider, K.J.; Smith, R.I.

1987-09-01

This study was conducted by the Pacific Northwest Laboratory (PNL) for the US Department of Energy (DOE) to identify and technically assess foreign decommissioning technology developments that may represent significant improvements over decommissioning technology currently available or under development in the United States. Technology need areas for nuclear power reactor decommissioning operations were identified and prioritized using the results of past light water reactor (LWR) decommissioning studies to quantitatively evaluate the potential for reducing cost and decommissioning worker radiation dose for each major decommissioning activity. Based on these identified needs, current foreign decommissioning technologies of potential interest to the US were identified through personal contacts and the collection and review of an extensive body of decommissioning literature. These technologies were then assessed qualitatively to evaluate their uniqueness, potential for a significant reduction in decommissioning costs and/or worker radiation dose, development status, and other factors affecting their value and applicability to US needs

Radiation detection technology assessment program (RADTAP)

International Nuclear Information System (INIS)

Smith, D.E.

1998-01-01

The U.S. Customs Service and the U.S. Department of Energy (DOE) conducted a technical and operational assessment of gamma ray radiation detection equipment during the period May 5-16, 1997 at a testing facility in North Carolina. The effort was entitled, ''Radiation Detection Technology Assessment Program (RADTAP)'', and was conducted for the purpose of assessing the applicability, sensitivity and robustness of a diverse suite of gamma ray detection and identification equipment for possible use by Customs and other law enforcement agencies. Thirteen companies entered 25 instruments into the assessment program. All detection equipment entered had to exhibit a minimum sensitivity of 20 micro-R per hour (background included) from a Cesium-137 point source. Isotope identifying spectrometers entered were man portable and operable at room temperature with read-out that could be interpreted by non-technical personnel. Radioactive sources used in the assessment included special nuclear material, industrial and health isotopes. Evaluators included Customs inspectors and technical experts from DOE and Customs. No conclusions or recommendations were issued based on the quantitative and qualitative test results, however, the results of the program provided law enforcement agencies with the necessary data to select equipment that best meets their operational needs and budgets. (author)

Technology Applications Team: Applications of aerospace technology

Science.gov (United States)

1993-01-01

Highlights of the Research Triangle Institute (RTI) Applications Team activities over the past quarter are presented in Section 1.0. The Team's progress in fulfilling the requirements of the contract is summarized in Section 2.0. In addition to our market-driven approach to applications project development, RTI has placed increased effort on activities to commercialize technologies developed at NASA Centers. These Technology Commercialization efforts are summarized in Section 3.0. New problem statements prepared by the Team in the reporting period are presented in Section 4.0. The Team's transfer activities for ongoing projects with the NASA Centers are presented in Section 5.0. Section 6.0 summarizes the status of four add-on tasks. Travel for the reporting period is described in Section 7.0. The RTI Team staff and consultants and their project responsibilities are listed in Appendix A. The authors gratefully acknowledge the contributions of many individuals to the RTI Technology Applications Team program. The time and effort contributed by managers, engineers, and scientists throughout NASA were essential to program success. Most important to the program has been a productive working relationship with the NASA Field Center Technology Utilization (TU) Offices. The RTI Team continues to strive for improved effectiveness as a resource to these offices. Industry managers, technical staff, medical researchers, and clinicians have been cooperative and open in their participation. The RTI Team looks forward to continuing expansion of its interaction with U.S. industry to facilitate the transfer of aerospace technology to the private sector.

New use of radiation, application to biomass technology

International Nuclear Information System (INIS)

Kaetsu, Isao

1982-01-01

The author has carried out the research on the utilization of radiation in the saccharification of biomass, waste cellulose in particular, to glucose, and the fermentation of the obtained glucose to alcohol; and the results were found to be fruitful. The use of radiation for the pretreatment of cellulose materials and for the fixation of biological catalysts are described, with emphasis on the author's works. For the pretreatment, cellulose material is deteriorated by irradiation, to facilitate largely the subsequent pulverization. This promotes the saccharification. As the biological catalysts for cellulose saccharification, enzyme (cellulase) or its product fungi are used, and as the catalyst for glucose fermentation, yeast is used. By the fixation of the catalysts through radiation polymerization, the efficiency of the processes can be raised greatly by raising the respective activities. (J.P.N.)

Medical applications with synchrotron radiation in Japan

Energy Technology Data Exchange (ETDEWEB)

Takeda, T.; Itai, Y. [Univ. of Tsukuba, Inst. of Clinical Medicine, Tsukuba (Japan); Hyodo, K.; Ando, M. [KEK, Tsukuba (Japan); Akatsuka, T. [Yamagata Univ., Faculty of Engineering, Yamagata (Japan); Uyama, C. [National Cardiovascular Centre, Suita (Japan)

1998-05-01

In Japan, various medical applications of synchrotron X-ray imaging, such as angiography, monochromatic X-ray computed tomography (CT), radiography and radiation therapy, are being developed. In particular, coronary arteriography (CAG) is quite an important clinical application of synchrotron radiation. Using a two-dimensional imaging method, the first human intravenous CAG was carried out at KEK in May 1996; however, further improvements of image quality are required in clinical practice. On the other hand, two-dimensional aortographic CAG revealed canine coronary arteries as clearly as those on selective CAG, and coronary arteries less than 0.2 mm in diameter. Among applications of synchrotron radiation to X-ray CT, phase-contrast X-ray CT and fluorescent X-ray CT are expected to be very interesting future applications of synchrotron radiation. For actual clinical applications of synchrotron radiation, a medical beamline and a laboratory are now being constructed at SPring-8 in Harima. 55 refs.

Industrial applications of radiations

International Nuclear Information System (INIS)

Gallien, C.L.

1988-01-01

Radiation processing refers to the use of ionizing radiation to initiate chemical or biological changes in various materials as a substitute for conventional thermal or chemical processes. The method was inroduced in the industrial field 30 years ago and is now being widely used for numerous applications, among which industrial radiography, polymer modification, sterilization or decontamination, and food preservation. Both electron beam accelerators and gamma sources can be used, depending mainly of the amount of radiation and the penetration required. Radiation processing presents an increasing economical importance; in 1986 the market volume of ionized products ranged 3 billion $ [fr

[Application Progress of Three-dimensional Laser Scanning Technology in Medical Surface Mapping].

Science.gov (United States)

Zhang, Yonghong; Hou, He; Han, Yuchuan; Wang, Ning; Zhang, Ying; Zhu, Xianfeng; Wang, Mingshi

2016-04-01

The booming three-dimensional laser scanning technology can efficiently and effectively get spatial three-dimensional coordinates of the detected object surface and reconstruct the image at high speed,high precision and large capacity of information.Non-radiation,non-contact and the ability of visualization make it increasingly popular in three-dimensional surface medical mapping.This paper reviews the applications and developments of three-dimensional laser scanning technology in medical field,especially in stomatology,plastic surgery and orthopedics.Furthermore,the paper also discusses the application prospects in the future as well as the biomedical engineering problems it would encounter with.

Scientific applications of frequency-stabilized laser technology in space

Science.gov (United States)

Schumaker, Bonny L.

1990-01-01

A synoptic investigation of the uses of frequency-stabilized lasers for scientific applications in space is presented. It begins by summarizing properties of lasers, characterizing their frequency stability, and describing limitations and techniques to achieve certain levels of frequency stability. Limits to precision set by laser frequency stability for various kinds of measurements are investigated and compared with other sources of error. These other sources include photon-counting statistics, scattered laser light, fluctuations in laser power, and intensity distribution across the beam, propagation effects, mechanical and thermal noise, and radiation pressure. Methods are explored to improve the sensitivity of laser-based interferometric and range-rate measurements. Several specific types of science experiments that rely on highly precise measurements made with lasers are analyzed, and anticipated errors and overall performance are discussed. Qualitative descriptions are given of a number of other possible science applications involving frequency-stabilized lasers and related laser technology in space. These applications will warrant more careful analysis as technology develops.

Advanced Space Radiation Detector Technology Development

Science.gov (United States)

Wrbanek, John D.; Wrbanek, Susan Y.; Fralick, Gustave C.

2013-01-01

The advanced space radiation detector development team at the NASA Glenn Research Center (GRC) has the goal of developing unique, more compact radiation detectors that provide improved real-time data on space radiation. The team has performed studies of different detector designs using a variety of combinations of solid-state detectors, which allow higher sensitivity to radiation in a smaller package and operate at lower voltage than traditional detectors. Integration of multiple solid-state detectors will result in an improved detector system in comparison to existing state-of-the-art instruments for the detection and monitoring of the space radiation field for deep space and aerospace applications.

Radiation sensors for medical, industrial and environmental applications: how to engage with schools and the general public

Science.gov (United States)

Seitz, B.; Campos Rivera, N.; Gray, R.; Powell, A.; Thomson, F.

2018-01-01

Radiation, radiation detection and radiation protection are topics in physics and its applications which generate a wide interest in the public. This interest is either generated through medical procedures, applications of nuclear energy or nuclear accidents. The technical nature of these topics usually means that they are not well covered in the normal education stream, opening many opportunities to engage with schools and the general public to showcase the latest developments and their applications. The detection of radiation is at the very heart of understanding radiation, its fascination and associated fears. The outreach group of the nuclear physics group at the University of Glasgow demonstrates a number of successful outreach activities centred around radiation detection and described in this paper, focusing on activities delivered to a variety of audiences and related to applied nuclear physics work within our group. These concentrate on the application of novel sensor technologies for nuclear decommissioning, medical imaging modalities and the monitoring of environmental radioactivity. The paper will provide some necessary background material as well as practical instructions for some of the activities developed.

Industrial application of radiation curing

Energy Technology Data Exchange (ETDEWEB)

Sasaki, Takashi [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

1994-12-31

The contents are advantages of radiation processes - a solvent-free system, less energy consumative, higher production rate, processability at ambient temperature; electron beams vs. ultraviolet curing; applications -broad spectrum of markets use radiation curable materials.

Industrial application of radiation curing

International Nuclear Information System (INIS)

Takashi Sasaki

1993-01-01

The contents are advantages of radiation processes - a solvent-free system, less energy consumative, higher production rate, processability at ambient temperature; electron beams vs. ultraviolet curing; applications -broad spectrum of markets use radiation curable materials

Proceedings: 2003 Radiation Protection Technology Conference

International Nuclear Information System (INIS)

2004-01-01

Health physics professionals within the nuclear industry are continually upgrading their programs with new methods and technologies. The Third Annual EPRI Radiation Protection Technology Conference facilitated this effort by communicating technical developments, program improvements, and experience throughout the nuclear power industry. When viewed from the perspective of shorter outages, diminishing numbers of contract RP technicians and demanding emergent work, this information flow is critical for the industry

The main steps on implementation of radiation processing technology - portuguese experience

International Nuclear Information System (INIS)

Luisa Botelho, M.

2010-11-01

The development of applications of ionizing radiation for Industrial purposes in Portugal began near of 1982 with the support of IAEA under the program of Cooperation and Technical Assistance - project POR/8/002. The IAEA program of Cooperation and Technical Assistance permitted that POR/08/002 took place between 1983 up to 1988. The collaboration of the International Experts and the personnel of National Laboratory of Industrial Engineering and Technology, nowadays Nuclear and Technologic Institute (ITN), allowed the construction of a Co-60 irradiation plant, designed by Tecnabexport (Russia). This facility is located in the ITN campus in Sacavem, Portugal. The main parameters studied prior to the implementation (sitting, design, construction, commissioning, operation, maintenance and foreseen decommission) were planned and executed according with the Portuguese legislation which is based on the International rules (IAEA Safety series) and Directive EURATOM 836/80, nowadays EURATOM 1493/93. A study of the geological stability of the site for future placement of the irradiation facility was done preceding the construction. The facility was constructed under Portuguese responsibility but designed and loaded with Co-60 by the Russian business rganization: Technabexport between 1987 and 1988. The whole process was supervised and approved by the ITN's Nuclear Protection and Safety Department. The Cobalt-60 irradiation facility was initially named GammaPi and later on Radiation Technologies Unit (UTR) and its management was under ITN's authority until 2003. Once established a quality system for the gamma facility, the following phase is to develop, validate and control the sterilization/disinfection process. In this step, a multidisciplinary approach and a continuous dialog with product managers and personnel must be taken into consideration in the experimental design for the correct and effective establishment of irradiation process. The knowledge of product's elements

Application of freezing and radiation technology on shelf-life of formed minced pork

International Nuclear Information System (INIS)

Todorovic, M.; Kustudic, M.

1994-01-01

The microflora of frozen, minced, formed pork was investigated with the aim to estimate the shelf-life of this product. The isolated microflora from frozen meat was identified by classical and up-to-date methods. The API 50 CHB system was applied for the Bacillus strains, whereas API 20A and enzymatic quick method API RAPID ID 32A was used for the Clostridium strains. Biochemical capabilities reading-out and identifications were performed on ATB instruments on the computer charts. The flavourings (pepper) were pretreated by radiation technology in the preventive purposes

Radiation effects in technologies of semiconductor materials and devises

International Nuclear Information System (INIS)

Korshunov, F.P.; Bogatyrev, Yu.V.; Lastovskij, S.B.; Marchenko, I.G.; Zhdanovich, N.E.

2003-01-01

In the paper were considered the physical basics and practical results of using of penetrating radiations in technologies of nuclear transmutation of semiconductor materials (Si, GaAs) as well as in production of semiconductor devices including high-power silicon diodes, thyristors and transistors. It is shown the high efficiency of radiation technology for increasing of electronic device speed, exclusion of technological operations such as gold or platinum diffusions, increase of quality, decrease of prime cost and increase of good-to-bad device ratio yield

Development situation of radiation curing materials

International Nuclear Information System (INIS)

He Songhua; Luo Junyi; Liu Zhen

2010-01-01

Due to fitting the '4E' principle, radiation curing technology, known as green technology, have shown its own superiority in many applications. It has been rapid developed in China and abroad in recent years, especially ultraviolet/electron beam (UV/EB) radiation curing technology. In order to let the researchers have a general understanding on the radiation curing materials and their development, in this paper a briefly introducing on the related radiation sources, chemical systems, curing mechanism, and the application, the common and difference of ultraviolet curing and electron beam curing has been made. A brief account of development of radiation-curable material in China and the outlook of the development of materials can be found in this paper. At last, we have proposed that the development of radiation curing technology will promote the development of the radiation curing material and benefit in the humanity. (authors)

Radiation tolerance of NPN bipolar technology with 30 GHz Ft

International Nuclear Information System (INIS)

Flament, O.; Synold, S.; Pontcharra, J. de; Niel, S.

1999-01-01

The ionizing dose and neutron radiation tolerance of Si QSA bipolar technology has been investigated. The transistors exhibit good radiation tolerance up to 100 krad and 5 10 13 n/cm 2 without any special fabrication steps to harden the technology to the studied effects. (authors)

The development of application technology for image processing in nuclear facilities

International Nuclear Information System (INIS)

Lee, Jong Min; Lee, Yong Bum; Kim, Woog Ki; Sohn, Surg Won; Kim, Seung Ho; Hwang, Suk Yeoung; Kim, Byung Soo

1991-01-01

The object of this project is to develop application technology of image processing in nuclear facilities where image signal are used for reliability and safety enhancement of operation, radiation exposure reduce of operator, and automation of operation processing. We has studied such application technology for image processing in nuclear facilities as non-tactile measurement, remote and automatic inspection, remote control, and enhanced analysis of visual information. On these bases, automation system and real-time image processing system are developed. Nuclear power consists in over 50% share of electic power supply of our country nowdays. So, it is required of technological support for top-notch technology in nuclear industry and its related fields. Especially, it is indispensable for image processing technology to enhance the reliabilty and safety of operation, to automate the process in a place like a nuclear power plant and radioactive envionment. It is important that image processing technology is linked to a nuclear engineering, and enhance the reliability abd safety of nuclear operation, as well as decrease the dose rate. (Author)

Radiation Protection in the Application of Active Detection Technologies

Science.gov (United States)

2013-07-01

BECKER, S.M. (2004). “Emergency communication and information issues in terrorism events involving radioactive materials,” Biosecur Bioterror. 2(3...National Council on Radiation Protection and Measurements. Considerations Regarding the Unintended Radiation Exposure of the Embryo, Fetus or Nursing

Discussion of environmental impact assessment for the nuclear technology application in hospital

International Nuclear Information System (INIS)

Li Shaoting; Xu Zhongyang

2010-01-01

Medical use of ionizing radiation has become the greatest artificial radiation in the world. Based on the characteristics of the nuclear technology application in hospital the content of the environmental impact assessment has been stated, including identification of the environmental impact factor, the standard, the environmental impact, control of the pollution as well. The dose of the medical staff which engaged in interventional operation and the accompanies of the patients which received nuclear medicine treatment should be focused on. (authors)

''Intelligent'' radiation measurements

International Nuclear Information System (INIS)

Ward, A.

1980-01-01

A description is given of three applications of current microprocessor technology which are characterized by the use of the microprocessor to impart a degree of intelligence to conventional radiation detection techniques. In the first application the microcomputer computes the radiation dose from the observed counting rate in a Geiger counter. In the second application the microcomputer provides the pulse height distribution and the radioisotopes used, from the spectrum of pulses from a scintillation counter. The third application is an arrangement for radiation monitor calibration. (H.K.)

Irradiation technology - industrial use

International Nuclear Information System (INIS)

Zyball, A.

1995-01-01

The most important applications of the radiation technology are the crosslinking of polymers and sterilisation. Although extensive experience about the use of this technology is available and powerful and dependable radiation facilities can be obtained, as yet the radiation technology has not found the acceptance it deserves in the industry. The main reason therefore has to do with how the question of radiation or the term radiation is presented to the industry and among the population. This paper will deal with considerations and ways in which the industrial use of the radiation technology can be expanded. (author)

Radiation protection technology. Specific course for authorized radiation protection representatives according the qualification guidelines technology for the radiation protection regulations (StrlSchV) and X-ray regulation (RoeV). 2. rev. ed.

International Nuclear Information System (INIS)

Rahn, Hans-Joachim

2012-01-01

The specific course for authorized radiation protection representatives according the qualification guidelines technology for the radiation protection regulations (StrlSchV) and X-ray regulation (RoeV). Covers the following issues: radiation protection - generally; licenses and notifications; scientific fundamentals; dosimetry, surveillance, control, documentation; technical radiation protection; radiation protection calculations.

Industrial applications of radiation chemistry

International Nuclear Information System (INIS)

Puig, Jean Rene

1959-01-01

The status of industrial applications of radiation chemistry as it stands 6 months after the second Geneva international conference is described. The main features of the interaction of ionizing radiations with matter are briefly stated and a review is made of the best studied and the more promising systems of radiation chemistry. The fields of organics, plastics, heterogeneous catalysis are emphasized. Economies of radiation production and utilization are discussed. Reprint of a paper published in Industries atomiques - no. 5-6, 1959

Biomedical applications of ionizing radiation

International Nuclear Information System (INIS)

Rosiak, J.M.; Pietrzak, M.

1997-01-01

Application of ionizing radiation for sterilization of medical devices, hygienization of cosmetics products as well as formation of biomaterials have been discussed. The advantages of radiation sterilization over the conventional methods have been indicated. The properties of modern biomaterials, hydrogels as well as some ways of their formation and modification under action of ionizing radiation were presented. Some commercial biomaterials of this kind produced in accordance with original Polish methods by means of radiation technique have been pointed out. (author)

Progress report on nuclear science and technology in China (Vol.3). Proceedings of academic annual meeting of China Nuclear Society in 2013, No.8--radiation research and its application sub-volume

International Nuclear Information System (INIS)

2014-05-01

Progress report on nuclear science and technology in China (Vol. 3) includes 12 articles which are communicated on the third national academic annual meeting of China Nuclear Society. There are 10 books totally. This is the eighth one, the content is about radiation research and its application sub-volume

Practical applications of coherent transition radiation

International Nuclear Information System (INIS)

Moran, M.J.

1987-01-01

The predictable nature of transition radiation (TR) emissions has been demonstrated under a wide variety of experimental conditions. The reliable character of TR allows the design of specific practical applications that use emissions from the optical to the x-ray spectral regions. Applications often can be enhanced by the spatial coherence of TR, and some have become highly developed. New applications may be developed through the use of other related radiation mechanisms. 20 refs., 3 figs

Medical and industrial application of radiation

International Nuclear Information System (INIS)

Ajayi, I.R.

1999-01-01

While dosimetry is not a radiation application, accurate dosage of radiation of utmost importance for all radiation applications. For both therapeutic and industrial applications it can be matter of life and death. For this reason, great efforts have been made to ensure that radiation dosages given to patients and used in all industrial applications are as near as possible to those prescribed. The World Health Organization (WHO) and the IAEA, together with many National Standard Laboratories and with the International Bureau of Weight and Measures, have been very active and successful during the last 20 years in ascertaining that normal cobalt-60 therapy unit. For this purpose, 63 Secondary Standard Dosimetry Laboratories have been established of which more than half are in developing countries. FRPS houses one of the Secondary Standard Dosimetry Laboratories. As accurate dosimetry is a prerequisite in radiotherapy, so it is in industrial exposures and all laboratories responsible for dosimetry have to make frequent intercomparisons with one of the Primary Standard Dosimetry Laboratories. The SSDL at FRPS hopes to commence this as soon as our new Harshaw 6600 TLD reader arrives. This has already been approved by the IAEA. Much high doses of radiation are used for some industrial applications, as discussed in a previous lecture, such as sterilization of rubber, and food preservation and newly developed techniques are being used for the assurance of the prescribed dose. IAEA provides assistance in this area also through the secondary standard dosimetry laboratories. The IAEA has a broad programme of assistance which includes the calibration of all instruments in the laboratories of the participants, be it for radiation protection, or high dose measurements

Radiation technology for preservation and hygienization of food and agricultural commodities

International Nuclear Information System (INIS)

Hajare, Sachin N.

2017-01-01

Growing population demands more food for consumption. Given that the agricultural land is shrinking day by day in urban as well as rural areas, we are left with no choice but to preserve the produce in whatever way we can. In this scenario, gamma irradiation or exposure of foods or food products to high energy rays is a very effective technology in long term preservation of these products. Food Irradiation is an established and effective processing methodology that involves controlled application of energy from ionizing radiations in an irradiation chamber shielded by thick concrete walls using radioisotopes (Cobalt-60 and Caesium-137), electron beam (up to 10 MeV) and X-rays (up to 5 MeV). Presently it is being practiced in more than 60 countries for various applications. Radiation processing can achieve insect disinfestation of stored products, inhibition of sprouting in tubers, bulbs and rhizomes, delay in fruit ripening, destruction of microbes responsible for food spoilage and elimination of pathogens and parasites of public health importance

Radiation cure technology used in inks and coatings

International Nuclear Information System (INIS)

Ravijst, J.-P.

1995-01-01

The radiation cure technology in inks and coatings by ultraviolet light (UV) and electron beam (EB) was introduced. The technology is the only one which meets the 3-E rules. An advantage of this technology is that a wide range of substrates can be printed such as paper, card, metal and even heat sensitive plastics

Shape Morphing Adaptive Radiator Technology (SMART) Updates to Techport Entry

Science.gov (United States)

Erickson, Lisa; Bertagne, Christopher; Hartl, Darren; Witcomb, John; Cognata, Thomas

2017-01-01

The Shape-Morphing Adaptive Radiator Technology (SMART) project builds off the FY16 research effort that developed a flexible composite radiator panel and demonstrated its ability to actuate from SMA's attached to it. The proposed FY17 Shape-Morphing Adaptive Radiator Technology (SMART) project's goal is to 1) develop a practical radiator design with shape memory alloys (SMAs) bonded to the radiator's panel, and 2) build a multi-panel radiator prototype for subsequent system level thermal vacuum tests. The morphing radiator employs SMA materials to passively change its shape to adapt its rate of heat rejection to vehicle requirements. Conceptually, the radiator panel has a naturally closed position (like a cylinder) in a cold environment. Whenever the radiator's temperature gradually rises, SMA's affixed to the face sheet will pull the face sheet open a commensurate amount - increasing the radiators view to space and causing it to reject more heat. In a vehicle, the radiator's variable heat rejection capabilities would reduce the number of additional heat rejection devices in a vehicle's thermal control system. This technology aims to help achieve the required maximum to minimum heat rejection ratio required for manned space vehicles to adopt a lighter, simpler, single loop thermal control architecture (ATCS). Single loop architectures are viewed as an attractive means to reduce mass and complexity over traditional dual-loop solutions. However, fluids generally considered safe enough to flow within crewed cabins (e.g. propylene glycol-water mixtures) have much higher freezing points and viscosities than those used in the external sides of dual loop ATCSs (e.g. Ammonia and HFE7000).

HS and E Application Technology branch progress report, July 1982-July 1983

International Nuclear Information System (INIS)

Deitesfeld, C.A.

1984-01-01

This report summarizes the applied research activities of the Health, Safety and Environment (HS and E) Application Technology branch at Rocky Flats Plant from July 1982 to July 1983. In this report, major headings present studies in three fields: general safety, radiation safety and environment, and health and safety engineering and meteorological studies

Radiation surveillance procedure during veterinary application of radioisotope

International Nuclear Information System (INIS)

Kamaldeep; Bhaktivinayagam, A.; Singh, Sanjay Kumar

2012-01-01

Radioisotopes have found wide applications in the field of biomedical veterinary nuclear medicine and research. Radiation safety issues during internal administration of radioisotopes to laboratory animals, unlike human use, are far more challenging and requires stringent, well planned and an organized system of radiation protection in the animal house facility. In this paper, we discuss our experience during veterinary research experiments involving use, handling and administration of liquid sources of 131 I. With extensive radiation protection surveillance and application of practical and essential radiation safety and hygiene practices, the radiation exposure and contamination levels during the veterinary application of isotopes can be kept ALARA

Synchrotron radiation: its characteristics and applications

International Nuclear Information System (INIS)

Blewett, J.P.; Chasman, R.; Green, G.K.

1977-01-01

It has been known for a century that charged particles radiate when accelerated and that relativistic electrons in the energy range between 100 MeV and several GeV and constrained to travel in circular orbits emit concentrated, intense beams with broad continuous spectra that can cover the electromagnetic spectrum from infrared through hard X-rays. Recently the possible applications of this radiation have been appreciated and electron synchrotrons and electron storage rings are now being used in many centers for studies of the properties of matter in the solid, liquid and gaseous states. A brief history is presented of ''synchrotron radiation'' as it is now called. The basic properties of this radiation are described and the world-wide distribution is indicated of facilities for its production. Particular attention is given to the proposed facility at Brookhaven which will be the first major installation to be dedicated only to the production and use of synchrotron radiation. Finally, typical examples are given of applications in the areas of radiation absorption studies, techniques based on scattering of radiation, and advances based on X-ray lithography

The application of infrared thermometric technology in the nuclear industry

International Nuclear Information System (INIS)

Wang Wenjin

1992-04-01

In the process of bituminization of low level waste liquid, to measure the surface temperature of a moving barrel filled with waste liquid and bitumen is essential. Thus, a special infrared thermometer is developed. The property of radiation resistance for the lithium tantalate prober which is a main part of the thermometer was carefully tested. The test results show that in the nuclear industry the infrared thermometric technology is applicable

Teledosimetry and its application in radiation hygiene

International Nuclear Information System (INIS)

Hajek, J.

1975-01-01

The principle and application is dealt with of teledosimetry, a new method of telemetric transfer of data on the flux density of ionizing radiation. A teledosimetric apparatus is described consisting of a transmitter with a halogen GM tube and a receiver with an evaluation device. Two cases of the application of teledosimetry in radiation hygiene practice are reported. The new method makes possible the monitoring of personnel working with radiation, the testing of the efficiency of radiation protection, and a reduction of doses to personnel in the process studied. (author)

Nuclear and radiation technologies in Ukraine: opportunities, status and problems of implementation

International Nuclear Information System (INIS)

Gorbulyin, V.P.

2011-01-01

The collection contains research materials and information presented at the Scientific Conference 'Nuclear and radiation technologies in Ukraine' (September 17, 2009, Kyiv). The articles offered specific ways to address a number of issues relevant to nuclear energy, science, technology, medicine and related to the radiation and environmental safety, the use of radiation technologies in medicine, development of uranium and uranium processing industry, safety on factories of NFC, nuclear physical instrumentation, behaviour with radioactive wastes.

A scintillation testing technology at a viewpoint of optical test. At a memory of winning of the Radiation Prize (Prize of Encouragement)

International Nuclear Information System (INIS)

Maekawa, Tatsuyuki

2000-01-01

In a 'summer school' held at Matsushima, a series of developmental results had been introduced on a wavelength shift type beta-ray detector and others recently progressed by author at a viewpoint of 'new reconsideration on scintillation testing, one of the oldest radiation testing technology for an optical testing'. As a chance to write this theme again was obtained at present, here were introduced on trial and errors, backgrounds on ideas, pains for trial production and so forth at a process of putting together them for actual technologies and products under combining a series of ideas with their needs. Here were newly introduced on developmental backgrounds, points for practicability, and so forth on optical radiation testing technology which had been developed by authors. By upgrading of radiation resistance on the optical fibers themselves, developments for not only radiation testing but also instrumentation in storage vessel specific to nuclear instrumentation are considered in future. And, some findings on new elements and techniques, such as application of radiation to refractive index change due to much minute exotherm, application of Cherenkov phenomenon in glass, fiber grating and interference test assembles a minute diffraction lattice into a core, and so forth are found recently, which will be expected for their future developments. (G.K.)

A scintillation testing technology at a viewpoint of optical test. At a memory of winning of the Radiation Prize (Prize of Encouragement)

Energy Technology Data Exchange (ETDEWEB)

Maekawa, Tatsuyuki [Toshiba Corp., Kawasaki, Kanagawa (Japan)

2000-04-01

In a 'summer school' held at Matsushima, a series of developmental results had been introduced on a wavelength shift type beta-ray detector and others recently progressed by author at a viewpoint of 'new reconsideration on scintillation testing, one of the oldest radiation testing technology for an optical testing'. As a chance to write this theme again was obtained at present, here were introduced on trial and errors, backgrounds on ideas, pains for trial production and so forth at a process of putting together them for actual technologies and products under combining a series of ideas with their needs. Here were newly introduced on developmental backgrounds, points for practicability, and so forth on optical radiation testing technology which had been developed by authors. By upgrading of radiation resistance on the optical fibers themselves, developments for not only radiation testing but also instrumentation in storage vessel specific to nuclear instrumentation are considered in future. And, some findings on new elements and techniques, such as application of radiation to refractive index change due to much minute exotherm, application of Cherenkov phenomenon in glass, fiber grating and interference test assembles a minute diffraction lattice into a core, and so forth are found recently, which will be expected for their future developments. (G.K.)

The national institute of radiation hygiene and the medical application of radiation

International Nuclear Information System (INIS)

Baarli, J.

1988-01-01

This paper gives a review of the rules and regulations concerning medical application of radiation in Norway. It discusses the intention of the regulations, the way in which the regulations is applied and how the National Institute of Radiation Hygiene as the competent authority assures the application of the regulations. The paper furthermore gives an indication of the areas of radiation application in medicine and the number of location of X-ray equipment, nuclear medical laboratories, radiation therapy equipment, etc. The number of X-ray examinations in Norway per year are also given, together with their distribution among the various types of examinations. Summary results of a quality assurance investigation of nuclear medical laboratories are given, as well as the results of inspections of the various types of equipment used in medical diagnostics

Applicable approach of the wireless technology for Korean nuclear power plants

International Nuclear Information System (INIS)

Ko, Do Young; Lee, Soo Ill

2013-01-01

Highlights: • To apply wireless technology for Korean NPPs, several stipulations are proposed. • WLAN is proposed as the most appropriate wireless technology for Korean NPPs. • WLAN can be applied to the specific fields except in the control system. • An attitude survey on wireless showed that 94.7% agree with the necessity of wireless. - Abstract: Recently, many nuclear power plants (NPPs) over the world use various types of wireless systems for the advantages. Unfortunately, wireless technologies are not currently installed in any Korean NPPs because it is difficult to solve the negative impact of unexpected outcomes or failures from the influence of the wireless technologies, which is electromagnetic interference and radio-frequency interference (EMI/RFI). Moreover, a lack of desire on the part of Korean nuclear industry to implement it leads to give up benefit from the wireless technologies. To install the wireless technologies with maximum benefit and minimum risk, a systematic approach, which quantify the negative impact and prevent the influence, is essential; therefore, this paper describes an applicable research result on the wireless technology for Korean NPPs based on regulatory guides and current wireless hardware and software technologies. Also, survey on the needs for the wireless technology for Korean nuclear power plants was conducted, because the level of awareness of workers in NPPs regarding wireless technologies is very important issue. In this paper, we propose an applicable system to enhance the applicability for the wireless technology for Korean NPPs. The result based on proposed applicable system shows that wireless local area network (WLAN) is the representative candidate for Korean NPPs, which can be applied to the specific fields of radiation monitoring, voice and data communication, component monitoring and instrumentation, and wireless cameras

Applicable approach of the wireless technology for Korean nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Ko, Do Young, E-mail: kodoyoung@khnp.co.kr; Lee, Soo Ill

2013-12-15

Highlights: • To apply wireless technology for Korean NPPs, several stipulations are proposed. • WLAN is proposed as the most appropriate wireless technology for Korean NPPs. • WLAN can be applied to the specific fields except in the control system. • An attitude survey on wireless showed that 94.7% agree with the necessity of wireless. - Abstract: Recently, many nuclear power plants (NPPs) over the world use various types of wireless systems for the advantages. Unfortunately, wireless technologies are not currently installed in any Korean NPPs because it is difficult to solve the negative impact of unexpected outcomes or failures from the influence of the wireless technologies, which is electromagnetic interference and radio-frequency interference (EMI/RFI). Moreover, a lack of desire on the part of Korean nuclear industry to implement it leads to give up benefit from the wireless technologies. To install the wireless technologies with maximum benefit and minimum risk, a systematic approach, which quantify the negative impact and prevent the influence, is essential; therefore, this paper describes an applicable research result on the wireless technology for Korean NPPs based on regulatory guides and current wireless hardware and software technologies. Also, survey on the needs for the wireless technology for Korean nuclear power plants was conducted, because the level of awareness of workers in NPPs regarding wireless technologies is very important issue. In this paper, we propose an applicable system to enhance the applicability for the wireless technology for Korean NPPs. The result based on proposed applicable system shows that wireless local area network (WLAN) is the representative candidate for Korean NPPs, which can be applied to the specific fields of radiation monitoring, voice and data communication, component monitoring and instrumentation, and wireless cameras.

Technological progress in radiation therapy for brain tumors

LENUS (Irish Health Repository)

Vernimmen, Frederik Jozef

2014-01-01

To achieve a good therapeutic ratio the radiation dose to the tumor should be as high as possible with the lowest possible dose to the surrounding normal tissue. This is especially the case for brain tumors. Technological ad- vancements in diagnostic imaging, dose calculations, and radiation delivery systems, combined with a better un- derstanding of the pathophysiology of brain tumors have led to improvements in the therapeutic results. The widely used technology of delivering 3-D conformal therapy with photon beams (gamma rays) produced by Li-near Accelerators has progressed into the use of Intensity modulated radiation therapy (IMRT). Particle beams have been used for several decades for radiotherapy because of their favorable depth dose characteristics. The introduction of clinically dedicated proton beam therapy facilities has improved the access for cancer patients to this treatment. Proton therapy is of particular interest for pediatric malignancies. These technical improvements are further enhanced by the evolution in tumor physiology imaging which allows for improved delineation of the tumor. This in turn opens the potential to adjust the radiation dose to maximize the radiobiological effects. The advances in both imaging and radiation therapy delivery will be discussed.

From radiation chemistry to radiation engineering

International Nuclear Information System (INIS)

Ballantine, D.S.

1976-01-01

During the past 25 years there has been a steady recognition that radiation in the form of electrons or gamma rays can offer positive advantages as a processing technology. Underlying this process industry, and largely responsible for its success, are significant contributions from the field of basic and applied radiation chemistry. In this paper it is attempted to relate fundamental radiation chemistry studies directly to the practical engineering applications

Computational methods for industrial radiation measurement applications

International Nuclear Information System (INIS)

Gardner, R.P.; Guo, P.; Ao, Q.

1996-01-01

Computational methods have been used with considerable success to complement radiation measurements in solving a wide range of industrial problems. The almost exponential growth of computer capability and applications in the last few years leads to a open-quotes black boxclose quotes mentality for radiation measurement applications. If a black box is defined as any radiation measurement device that is capable of measuring the parameters of interest when a wide range of operating and sample conditions may occur, then the development of computational methods for industrial radiation measurement applications should now be focused on the black box approach and the deduction of properties of interest from the response with acceptable accuracy and reasonable efficiency. Nowadays, increasingly better understanding of radiation physical processes, more accurate and complete fundamental physical data, and more advanced modeling and software/hardware techniques have made it possible to make giant strides in that direction with new ideas implemented with computer software. The Center for Engineering Applications of Radioisotopes (CEAR) at North Carolina State University has been working on a variety of projects in the area of radiation analyzers and gauges for accomplishing this for quite some time, and they are discussed here with emphasis on current accomplishments

The development of advanced robotics technology in high radiation environment

Energy Technology Data Exchange (ETDEWEB)

Lee, Yong Bum; Cho, Jaiwan; Lee, Nam Ho; Choi, Young Soo; Park, Soon Yong; Lee, Jong Min; Park, Jin Suk; Kim, Seung Ho; Kim, Byung Soo; Moon, Byung Soo

1997-07-01

In the tele-operation technology using tele-presence in high radiation environment, stereo vision target tracking by centroid method, vergence control of stereo camera by moving vector method, stereo observing system by correlation method, horizontal moving axis stereo camera, and 3 dimensional information acquisition by stereo image is developed. Also, gesture image acquisition by computer vision and construction of virtual environment for remote work in nuclear power plant. In the development of intelligent control and monitoring technology for tele-robot in hazardous environment, the characteristics and principle of robot operation. And, robot end-effector tracking algorithm by centroid method and neural network method are developed for the observation and survey in hazardous environment. 3-dimensional information acquisition algorithm by structured light is developed. In the development of radiation hardened sensor technology, radiation-hardened camera module is designed and tested. And radiation characteristics of electric components is robot system is evaluated. Also 2-dimensional radiation monitoring system is developed. These advanced critical robot technology and telepresence techniques developed in this project can be applied to nozzle-dam installation /removal robot system, can be used to realize unmanned remotelization of nozzle-dam installation / removal task in steam generator of nuclear power plant, which can be contributed for people involved in extremely hazardous high radioactivity area to eliminate their exposure to radiation, enhance their task safety, and raise their working efficiency. (author). 75 refs., 21 tabs., 15 figs.

The development of advanced robotics technology in high radiation environment

International Nuclear Information System (INIS)

Lee, Yong Bum; Cho, Jaiwan; Lee, Nam Ho; Choi, Young Soo; Park, Soon Yong; Lee, Jong Min; Park, Jin Suk; Kim, Seung Ho; Kim, Byung Soo; Moon, Byung Soo.

1997-07-01

In the tele-operation technology using tele-presence in high radiation environment, stereo vision target tracking by centroid method, vergence control of stereo camera by moving vector method, stereo observing system by correlation method, horizontal moving axis stereo camera, and 3 dimensional information acquisition by stereo image is developed. Also, gesture image acquisition by computer vision and construction of virtual environment for remote work in nuclear power plant. In the development of intelligent control and monitoring technology for tele-robot in hazardous environment, the characteristics and principle of robot operation. And, robot end-effector tracking algorithm by centroid method and neural network method are developed for the observation and survey in hazardous environment. 3-dimensional information acquisition algorithm by structured light is developed. In the development of radiation hardened sensor technology, radiation-hardened camera module is designed and tested. And radiation characteristics of electric components is robot system is evaluated. Also 2-dimensional radiation monitoring system is developed. These advanced critical robot technology and telepresence techniques developed in this project can be applied to nozzle-dam installation /removal robot system, can be used to realize unmanned remotelization of nozzle-dam installation / removal task in steam generator of nuclear power plant, which can be contributed for people involved in extremely hazardous high radioactivity area to eliminate their exposure to radiation, enhance their task safety, and raise their working efficiency. (author). 75 refs., 21 tabs., 15 figs

Proceedings of the FNCA 2007 workshop on application of electron accelerator. Radiation processing of natural polymer

International Nuclear Information System (INIS)

Tamada, Masao; Kume, Tamikazu

2008-12-01

This workshop was co-sponsored by the Ministry of Education, Culture, Sports, Science and Technology (MEXT), Japan and the Ministry of Science and Technology (MOST), Vietnam. The Vietnam Atomic Energy Commission and Japan Atomic Energy Agency (JAEA) jointly executed the workshop in cooperation with the International Atomic Energy Agency (IAEA). The main objectives of the workshop were the following: - to discuss for the promotion of the commercial applications of radiation processing of natural polymer. - to prepare the work plan for the FNCA activities for 2007-2008. The workshop was attended by experts on radiation processing from Bangladesh, China, Egypt, India, Indonesia, Japan, Korea, Malaysia, Pakistan, Philippines, Sri Lanka, Thailand and Vietnam. The radiation processing of natural polymer is divided into crosslinking, degradation and graft polymerization. The radiation crosslinked polysaccharides are mainly used to prepare hydrogel for healthcare and environment. Hydrogels were commercialized in India, Korea, and Malaysia and are going to be commercialized in Philippines and Vietnam as wound dressings. Radiation degraded polysaccharides (alginate and chitosan) are commercialized in China and Vietnam in aquaculture and agriculture, respectively. Indonesia successfully carried out field test of radiation degraded chitosan as plant growth promoter. Also the radiation degraded chitosan was demonstrated to preserve post harvest fruit and to extend the shelf life of papaya in Pakistan and Sri Lanka, respectively. Radiation graft polymerization onto polysaccharide is applied for production of soil conditioner in Vietnam. Several applications of grafting technique were also reported. Manuscripts submitted by presenters were compiled in the proceedings. The 31 of the presented papers are indexed individually. (J.P.N.)

Technological laser application

International Nuclear Information System (INIS)

Shia, D.O.; Kollen, R.; Rods, U.

1980-01-01

Problems of the technological applications of lasers are stated in the popular form. Main requirements to a technological laser as well as problems arising in designing any system using lasers have been considered. Areas of the laser applications are described generally: laser treatment of materials, thermal treatment, welding, broach and drilling of holes, scribing, microtreatment and adjustment of resistors, material cutting, investigations into controlled thermonuclear fussion

Wireless remote radiation monitoring system (WRRMS). Innovative technology summary report

International Nuclear Information System (INIS)

1998-12-01

The Science Application International Corporation (SAIC) RadStar trademark wireless remote radiation monitoring system (WRRMS) is designed to provide real-time monitoring of the radiation dose to workers as they perform work in radiologically contaminated areas. WRRMS can also monitor dose rates in a room or area. The system uses radio-frequency communications to transmit dose readings from the wireless dosimeters worn by workers to a remote monitoring station that can be located out of the contaminated area. Each base station can monitor up to 16 workers simultaneously. The WRRMS can be preset to trigger both audible and visual alarms at certain dose rates. The alarms are provided to the worker as well as the base station operator. This system is particularly useful when workers are wearing personal protective clothing or respirators that make visual observation of their self-reading dosimeters (SRDs), which are typically used to monitor workers, more difficult. The base station is an IBM-compatible personal computer that updates and records information on individual workers every ten seconds. Although the equipment costs for this improved technology are higher than the SRDs (amortized at $2.54/hr versus $1.02/hr), total operational costs are actually less ($639/day versus $851/day). This is because the WRRMS requires fewer workers to be in the contaminated zone than the traditional (baseline) technology. There are also intangible benefits associated with improved worker safety and as low as reasonably achievable (ALARA) principles, making the WRRMS an attractive alternative to the baseline technology. The baseline technology measures only integrated dose and requires workers to check their own dosimeters manually during the task

Wireless remote radiation monitoring system (WRRMS). Innovative technology summary report

Energy Technology Data Exchange (ETDEWEB)

1998-12-01

The Science Application International Corporation (SAIC) RadStar{trademark} wireless remote radiation monitoring system (WRRMS) is designed to provide real-time monitoring of the radiation dose to workers as they perform work in radiologically contaminated areas. WRRMS can also monitor dose rates in a room or area. The system uses radio-frequency communications to transmit dose readings from the wireless dosimeters worn by workers to a remote monitoring station that can be located out of the contaminated area. Each base station can monitor up to 16 workers simultaneously. The WRRMS can be preset to trigger both audible and visual alarms at certain dose rates. The alarms are provided to the worker as well as the base station operator. This system is particularly useful when workers are wearing personal protective clothing or respirators that make visual observation of their self-reading dosimeters (SRDs), which are typically used to monitor workers, more difficult. The base station is an IBM-compatible personal computer that updates and records information on individual workers every ten seconds. Although the equipment costs for this improved technology are higher than the SRDs (amortized at $2.54/hr versus $1.02/hr), total operational costs are actually less ($639/day versus $851/day). This is because the WRRMS requires fewer workers to be in the contaminated zone than the traditional (baseline) technology. There are also intangible benefits associated with improved worker safety and as low as reasonably achievable (ALARA) principles, making the WRRMS an attractive alternative to the baseline technology. The baseline technology measures only integrated dose and requires workers to check their own dosimeters manually during the task.

MO-E-BRF-01: Research Opportunities in Technology for Innovation in Radiation Oncology (Highlight of ASTRO NCI 2013 Workshop)

International Nuclear Information System (INIS)

Hahn, S; Jaffray, D; Chetty, I; Benedict, S

2014-01-01

Radiotherapy is one of the most effective treatments for solid tumors, in large part due to significant technological advances associated with, for instance, the ability to target tumors to very high levels of accuracy (within millimeters). Technological advances have played a central role in the success of radiation therapy as an oncologic treatment option for patients. ASTRO, AAPM and NCI sponsored a workshop “Technology for Innovation in Radiation Oncology” at the NCI campus in Bethesda, MD on June 13–14, 2013. The purpose of this workshop was to bring together expert clinicians and scientists to discuss the role of disruptive technologies in radiation oncology, in particular with regard to how they are being developed and translated to clinical practice in the face of current and future challenges and opportunities. The technologies discussed encompassed imaging and delivery aspects, along with methods to enable/facilitate application of them in the clinic. Measures for assessment of the performance of these technologies, such as techniques to validate quantitative imaging, were reviewed. Novel delivery technologies, incorporating efficient and safe delivery mechanisms enabled by development of tools for process automation and the associated field of oncology informatics formed one of the central themes of the workshop. The discussion on disruptive technologies was grounded in the need for evidence of efficacy. Scientists in the areas of technology assessment and bioinformatics provided expert views on different approaches toward evaluation of technology efficacy. Clinicians well versed in clinical trials incorporating disruptive technologies (e.g. SBRT for early stage lung cancer) discussed the important role of these technologies in significantly improving local tumor control and survival for these cohorts of patients. Recommendations summary focused on the opportunities associated with translating the technologies into the clinic and assessing their

MO-E-BRF-01: Research Opportunities in Technology for Innovation in Radiation Oncology (Highlight of ASTRO NCI 2013 Workshop)

Energy Technology Data Exchange (ETDEWEB)

Hahn, S [University of Pennsylvania, Philadelphia, PA (United States); Jaffray, D [Princess Margaret Hospital, Toronto, ON (Canada); Chetty, I [Henry Ford Health System, Detroit, MI (United States); Benedict, S [UC Davis Cancer Center, Sacramento, CA (United States)

2014-06-15

Radiotherapy is one of the most effective treatments for solid tumors, in large part due to significant technological advances associated with, for instance, the ability to target tumors to very high levels of accuracy (within millimeters). Technological advances have played a central role in the success of radiation therapy as an oncologic treatment option for patients. ASTRO, AAPM and NCI sponsored a workshop “Technology for Innovation in Radiation Oncology” at the NCI campus in Bethesda, MD on June 13–14, 2013. The purpose of this workshop was to bring together expert clinicians and scientists to discuss the role of disruptive technologies in radiation oncology, in particular with regard to how they are being developed and translated to clinical practice in the face of current and future challenges and opportunities. The technologies discussed encompassed imaging and delivery aspects, along with methods to enable/facilitate application of them in the clinic. Measures for assessment of the performance of these technologies, such as techniques to validate quantitative imaging, were reviewed. Novel delivery technologies, incorporating efficient and safe delivery mechanisms enabled by development of tools for process automation and the associated field of oncology informatics formed one of the central themes of the workshop. The discussion on disruptive technologies was grounded in the need for evidence of efficacy. Scientists in the areas of technology assessment and bioinformatics provided expert views on different approaches toward evaluation of technology efficacy. Clinicians well versed in clinical trials incorporating disruptive technologies (e.g. SBRT for early stage lung cancer) discussed the important role of these technologies in significantly improving local tumor control and survival for these cohorts of patients. Recommendations summary focused on the opportunities associated with translating the technologies into the clinic and assessing their

Radioisotopes and radiation. Spin-off technologies

International Nuclear Information System (INIS)

Bujan, Alfonso

2001-01-01

A description is given of the isotope and radiation applications in Argentina. The applications of nuclear techniques in agriculture and animal sciences are reviewed as well as the applications in sedimentology and soil sciences. The use of the sterile insect technique for pest control in some regions of Argentina is described. A review is made of the applications of irradiation for sterilization and food preservation in the country as well as the use of irradiation for industrial processes

The CFFTP technology applications program

International Nuclear Information System (INIS)

Anon.

1984-01-01

The Canadian Fusion Fuels Technology Project (CFFTP) was originally conceived as having a Technology Applications Program to help fulfill its mandate of extending and adapting existing Canadian technology for use in international fusion programs. This technology was determined to be materials, breeder technology, remote handling, health and saftey, and tritium fuel systems. The CFFTP Applications Program has done work for the STARFIRE, MARS and TFTR reactors as well as developing two computer codes for tritium fuel systems. In the future the Technology Applications Program will be involved in the Tokamak Fusion Core Experiment (TFCX) as well as work for NET, JET and Frascati

Radiation disinfestation: A viable technology for developing countries

International Nuclear Information System (INIS)

Loaharanu, P.

1985-01-01

Increasing food production in many countries is often offset by spoilage losses that occur at different stages after harvesting, slaughtering, or catching. The situation becomes critical in developing countries as more food is needed to feed the ever-increasing population. One of the major problems of losses of food and agricultural products during storage is insect infestation. This paper reviews some insect infestation problems of valuable crops in developing countries such as cereals, pulses, dried fish and meat, fresh and dried fruits, coffee and cocoa beans, spices, and cured tobacco leaves. Present practices of chemical fumigation to eliminate insect problems in these crops give rise to concern from the points of view of both public health and occupational safety. Irradiation technology has been shown to be as effective as other insect disinfestation methods and could provide a viable alternative for this purpose. Insects do not develop resistance to physical techniques such as heat or irradiation as they do to chemical treatments. Applications of radiation for disinfestation of food and agricultural products of importance to developing countries are discussed. The economics of radiation disinfestation of cereals and pulses, dried fish, and fresh fruits are also discussed

Application of maximum radiation exposure values and monitoring of radiation exposure

International Nuclear Information System (INIS)

1996-01-01

The guide presents the principles to be applied in calculating the equivalent dose and the effective dose, instructions on application of the maximum values for radiation exposure, and instruction on monitoring of radiation exposure. In addition, the measurable quantities to be used in monitoring the radiation exposure are presented. (2 refs.)

Report on the Application of Ionizing Radiations in Costa Rica

International Nuclear Information System (INIS)

Munoz-Araya, J.

1992-07-01

This report presents an analysis of the different public and private institutions, that in any form applies ionizing radiations. In total a sample of 387 was considered; it offers a great reliability, considering the size of Costa Rican market. Fundamentally the information was taken from the archives of the Atomic Energy Commision of Costa Rica; also from reports of labors and surveys carried out during 1991, tending to justify the Project ARCAL XVI: Industrial Applications of the Nuclear Technology. (author)

Development and application of PET-MRI image fusion technology

International Nuclear Information System (INIS)

Song Jianhua; Zhao Jinhua; Qiao Wenli

2011-01-01

The emerging and growing in popularity of PET-CT scanner brings us the convenience and cognizes the advantages such as diagnosis, staging, curative effect evaluation and prognosis for malignant tumor. And the PET-MRI installing maybe a new upsurge when the machine gradually mature, because of the MRI examination without the radiation exposure and with the higher soft tissue resolution. This paper summarized the developing course of image fusion technology and some researches of clinical application about PET-MRI at present, in order to help people to understand the functions and know its wide application of the upcoming new instrument, mainly focuses the application on the central nervous system and some soft tissue lesions. And before PET-MRI popularization, people can still carry out some researches of various image fusion and clinical application on the current equipment. (authors)

Principles and practice of radiation safety and protection in the application of nuclear techniques in water resource development and management

International Nuclear Information System (INIS)

Mallam, S. P.

2000-07-01

Nigeria, as is the case with many other countries of the world, is facing a problem with water supply and there is therefore a need to diversify the technology employed in the search for and management of water resources. Nuclear technology, including the use of isotopes (natural and artificial) has been found to be able to play a vital role in this search. The application of this technology is wide and varied in the types of radiation sources that can be applied as well as the type of problems that need to be solved. for example, in the search for groundwater, environmental isotopes such as 3 H and 14 C may be applied while NAA and XRF may become useful in the monitoring of fresh water quality. Neutron moisture probes and gamma-gamma well logging are sources of radiation that may be employed in the management of water sources for proper irrigation just as active and stable isotopes may be applied as tracers for the detection of leaks in pipes for domestic water. Because of this diversity, the radiation safety and protection problems associated with the application of nuclear technology in water resource development and management will depend on the particular condition of use. In this paper the aspects of radiation safety and the protection of human health and the environment from the detrimental effects of ionising radiation will be considered. The presentation will underscore the importance of an understanding of the nature and properties of ionising radiation and the associated hazards, familiarise participants with terminology used in radiation protection, highlight the relevant legislation in radiation safety and protection, give the basic principles of radiation protection with an emphasis on the importance of keeping doses as low as reasonably achievable (ALARA)

Radiation acoustics and its applications

International Nuclear Information System (INIS)

Lyamshev, L.M.

1992-01-01

Radiation acoustics is a new branch of acoustics, developing on the boundary of acoustics, nuclear physics, elementary particles and high-energy physics. Its fundamentals are laying in the research of acoustical effects due to the interaction of penetrating radiation with matter. The study of radiation-acoustical effects leads to the new opportunities in the penetration radiation research (acoustical detection, radiation-acoustical dosimetry), study of the physical parameters of matter, in a solution of some applied problems of nondestructive testing, and also for the radiation-acoustical influence on physical and chemical structure of the matter. Results of theoretical and experimental investigations are given. Different mechanisms of the sound generation by penetrating radiation of liquids and solids are considered. Some applications - the radiation acoustical microscopy and visualisation, the acoustical detection of high energy X-ray particles and possibility of using of high energy neutrino beams in geoacoustics - are discussed

TERA-MIR radiation: materials, generation, detection and applications III (Conference Presentation)

Science.gov (United States)

Pereira, Mauro F.

2016-10-01

This talk summarizes the achievements of COST ACTION MP1204 during the last four years. [M.F. Pereira, Opt Quant Electron 47, 815-820 (2015).]. TERA-MIR main objectives are to advance novel materials, concepts and device designs for generating and detecting THz and Mid Infrared radiation using semiconductor, superconductor, metamaterials and lasers and to beneficially exploit their common aspects within a synergetic approach. We used the unique networking and capacity-building capabilities provided by the COST framework to unify these two spectral domains from their common aspects of sources, detectors, materials and applications. We created a platform to investigate interdisciplinary topics in Physics, Electrical Engineering and Technology, Applied Chemistry, Materials Sciences and Biology and Radio Astronomy. The main emphasis has been on new fundamental material properties, concepts and device designs that are likely to open the way to new products or to the exploitation of new technologies in the fields of sensing, healthcare, biology, and industrial applications. End users are: research centres, academic, well-established and start-up Companies and hospitals. Results are presented along our main lines of research: Intersubband materials and devices with applications to fingerprint spectroscopy; Metamaterials, photonic crystals and new functionalities; Nonlinearities and interaction of radiation with matter including biomaterials; Generation and Detection based on Nitrides and Bismides. The talk is closed by indicating the future direction of the network that will remain active beyond the funding period and our expectations for future joint research.

The development and current status of the technology of isotope and radiation in China

Energy Technology Data Exchange (ETDEWEB)

Jinrong, Z. [China Institute of Atomic Energy, Beijing, (China). Department of Isotopes

1997-10-01

The research and applications of isotope technology and radiation sources in China are presented. Many effort were directed towards production of radiopharmaceuticals, radiation sources, radiation treatment and radioactive tracers. Reactor and accelerator produced radioisotopes contributed to and will further accelerate the development of nuclear medicine in China. Recently, much attention has been paid on tumor therapy mainly with radiolabelled monoclonal antibody, radiolabelled microsphere and colloid, bone-seeking agents, and radiolabelled Octreotide. Radioimmunoassay has been widely used with many convenient kits available. There are above 30 radioimmunoassay kit produces and more than 60 radioimmunoassay centers. Recently the advance is mainly in solid-phase separation process and in radioimmunoassay method, including some nonradioactive immunoassay methods, such as enzyme immunoassay, fluorescence immunoassay, and chemiluminescence immunoassay. Kits for enzyme immunoassay have been put into clinical use. Various radiation sources are produced for medical purposes and for use in nuclear power stations 4 refs., 8 tabs.

The development and current status of the technology of isotope and radiation in China

International Nuclear Information System (INIS)

Jinrong, Z.

1997-01-01

The research and applications of isotope technology and radiation sources in China are presented. Many effort were directed towards production of radiopharmaceuticals, radiation sources, radiation treatment and radioactive tracers. Reactor and accelerator produced radioisotopes contributed to and will further accelerate the development of nuclear medicine in China. Recently, much attention has been paid on tumor therapy mainly with radiolabelled monoclonal antibody, radiolabelled microsphere and colloid, bone-seeking agents, and radiolabelled Octreotide. Radioimmunoassay has been widely used with many convenient kits available. There are above 30 radioimmunoassay kit produces and more than 60 radioimmunoassay centers. Recently the advance is mainly in solid-phase separation process and in radioimmunoassay method, including some nonradioactive immunoassay methods, such as enzyme immunoassay, fluorescence immunoassay, and chemiluminescence immunoassay. Kits for enzyme immunoassay have been put into clinical use. Various radiation sources are produced for medical purposes and for use in nuclear power stations

Application of physics technology in the preservation of food and fresh fruits and vegetables

International Nuclear Information System (INIS)

Bai Yaxiang; Hu Yucai; Xu Jianping

2003-01-01

Physics provides a new way for food storage and preservation. Experiments show that application of radiation, electrostatic fields, high voltage pulsed electric fields and microwaves to food, fruits and vegetables plays the part of insecticide, pasteurization and antisepsis without damaging nutritional structure and original flavor. Recent advances in the application of physics technology in food pasteurization and preservation are summarized, and prospects for future developments presented

Applications of synchrotron radiation in Biophysics

International Nuclear Information System (INIS)

Bemski, G.

1983-01-01

A short introduction to the generation of the synchrotron radiation is made. Following, the applications of such a radiation in biophysics with emphasis to the study of the hemoglobin molecule are presented. (L.C.) [pt

Investigation of food irradiation technology for application to plant quarantine. Working group report of food irradiation technology

Energy Technology Data Exchange (ETDEWEB)

Sunaga, Hiromi; Ito, Hitoshi; Takatani, Yasuyuki; Takizawa, Haruki; Yotsumoto, Keiichi; Tanaka, Ryuichi [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; Hirano, Tsuyoshi; Tokunaga, Okihiro

1999-06-01

The commercialization of food irradiation in Japan was started in 1973 for the sprout inhibition of potatoes as the first successful food irradiation facility in the world. Since approval of potato irradiation, no items has been commercialized in Japan. However, international agreement for phase out of methyl bromide after 2005 and increasing incidences of foodborn diseases such as by Escherichia coli O157:H7 are forcing to have interesting to food irradiation. Takasaki Radiation Chemistry Research Establishment has long experiences on research of irradiation effect and engineering of food irradiation in Japan. From these back ground, working group of food irradiation was organized at August 1997 by some members of Department of Radiation Research for Environment and Resources and Advanced Technology Center for supporting technically on commercialization of food irradiation. This report presents the result of discussion in working group on generalization up to date researches of food irradiation, application fields and items, technical problems and future prospects of this technology in Japan. (author)

Study and application of high-density concrete in radiation-shielding experiment

International Nuclear Information System (INIS)

Wu Chongming; Ding Dexin; Xiao Xuefu; Wang Shaolin; Lin Xingjun; Shen Yuanyuan

2008-01-01

According to the demand for research and construction project, a series of systematic experiments and studies on shielding γ-ray radiation concrete with the density of 4.60 t/m 3 were made in such aspects as mix ratio design, construction technology, uniformly shielding etc. Such issues as uniformity in the construction and compactness were solved. The ray test method for uniformly shielding concrete was presented and some technical steps for this high-density concrete used in the process of test design or construction were summed up. A series of tests and practical applications show that this technology of mix ratio design and construction is feasible. (authors)

Radiation effects in semiconductors

CERN Document Server

2011-01-01

There is a need to understand and combat potential radiation damage problems in semiconductor devices and circuits. Written by international experts, this book explains the effects of radiation on semiconductor devices, radiation detectors, and electronic devices and components. These contributors explore emerging applications, detector technologies, circuit design techniques, new materials, and innovative system approaches. The text focuses on how the technology is being used rather than the mathematical foundations behind it. It covers CMOS radiation-tolerant circuit implementations, CMOS pr

Development of Radiation Fusion Biotechnology

Energy Technology Data Exchange (ETDEWEB)

Jo, Sung Kee; Lee, Ju Woon; Park, Sang Hyun

2010-04-15

{center_dot} Development of Radiation Fusion Technology with Food Technology by the Application of High Dose Irradiation - To develop fundamental technology using high dose irradiation, effects of high dose irradiation on food components, combined effects of irradiation with food engineering, irradiation condition to destroy radiation resistant foodborne bacteria were studied. - To develop E-beam irradiation technology, irradiation conditions for E-beam and domination effects of E-beam irradiation were determined. The physical marker for E-beam irradiated foods or not was developed. - To develop purposed foods to extreme environmental, ready-to-eat foods and low toxic animal feeds were developed. Through the fundamental researches, the legislation for new irradiated foods and application of E-beam was introduced. {center_dot} Development of modulators against degenerative aging using radiation fusion technology - Confirmation of similarity of radiation-induced aging and normal aging by comparative analysis study - Selection of degenerative aging biomarkers related to immune/hematopoiesis, oxidative damage, molecular signaling, lipid metabolism - Establishment of optimal radiation application conditions for aging modeling - Validation of biomarkers and models using substances {center_dot} Development of biochips and kits using RI detection technology for life science - Establishment of kinase-substrate interaction analysis using RI detection technique (More than 30 times detection sensitivity compared to conventional fluorescence detection techniques). - The RI detection technique reduces the overall experiment time, as the use of blocking agent can be avoided, offer minimum non-specific binding, and facilitates a rapid data analysis with a simplify the process of chip manufacturing

Development of Radiation Fusion Biotechnology

International Nuclear Information System (INIS)

Jo, Sung Kee; Lee, Ju Woon; Park, Sang Hyun

2010-04-01

· Development of Radiation Fusion Technology with Food Technology by the Application of High Dose Irradiation - To develop fundamental technology using high dose irradiation, effects of high dose irradiation on food components, combined effects of irradiation with food engineering, irradiation condition to destroy radiation resistant foodborne bacteria were studied. - To develop E-beam irradiation technology, irradiation conditions for E-beam and domination effects of E-beam irradiation were determined. The physical marker for E-beam irradiated foods or not was developed. - To develop purposed foods to extreme environmental, ready-to-eat foods and low toxic animal feeds were developed. Through the fundamental researches, the legislation for new irradiated foods and application of E-beam was introduced. · Development of modulators against degenerative aging using radiation fusion technology - Confirmation of similarity of radiation-induced aging and normal aging by comparative analysis study - Selection of degenerative aging biomarkers related to immune/hematopoiesis, oxidative damage, molecular signaling, lipid metabolism - Establishment of optimal radiation application conditions for aging modeling - Validation of biomarkers and models using substances · Development of biochips and kits using RI detection technology for life science - Establishment of kinase-substrate interaction analysis using RI detection technique (More than 30 times detection sensitivity compared to conventional fluorescence detection techniques). - The RI detection technique reduces the overall experiment time, as the use of blocking agent can be avoided, offer minimum non-specific binding, and facilitates a rapid data analysis with a simplify the process of chip manufacturing

Current External Beam Radiation Therapy Quality Assurance Guidance: Does It Meet the Challenges of Emerging Image-Guided Technologies?

International Nuclear Information System (INIS)

Palta, Jatinder R.; Liu, Chihray; Li, Jonathan G.

2008-01-01

The traditional prescriptive quality assurance (QA) programs that attempt to ensure the safety and reliability of traditional external beam radiation therapy are limited in their applicability to such advanced radiation therapy techniques as three-dimensional conformal radiation therapy, intensity-modulated radiation therapy, inverse treatment planning, stereotactic radiosurgery/radiotherapy, and image-guided radiation therapy. The conventional QA paradigm, illustrated by the American Association of Physicists in Medicine Radiation Therapy Committee Task Group 40 (TG-40) report, consists of developing a consensus menu of tests and device performance specifications from a generic process model that is assumed to apply to all clinical applications of the device. The complexity, variation in practice patterns, and level of automation of high-technology radiotherapy renders this 'one-size-fits-all' prescriptive QA paradigm ineffective or cost prohibitive if the high-probability error pathways of all possible clinical applications of the device are to be covered. The current approaches to developing comprehensive prescriptive QA protocols can be prohibitively time consuming and cost ineffective and may sometimes fail to adequately safeguard patients. It therefore is important to evaluate more formal error mitigation and process analysis methods of industrial engineering to more optimally focus available QA resources on process components that have a significant likelihood of compromising patient safety or treatment outcomes

X-ray electromagnetic application technology

International Nuclear Information System (INIS)

2011-01-01

The investigating committee aimed at research on electromagnetic fields in functional devices and X-ray fibers for efficient coherent X-ray generation and their material science, high-precision manufacturing, particularly for X-ray electromagnetic application technology from January 2006 to December 2008. In this report, we describe our research results, in particular, on the topics of synchrotron radiation and free-electron laser, Saga Synchrotron Project, X-ray waveguides and waveguide-based lens-less hard-X-ray imaging, X-ray nanofocusing for capillaries and zone plates, dispersion characteristics in photonics crystal consisting of periodic atoms for nanometer waveguides, electromagnetic characteristics of grid structures for scattering fields of nano-meter electromagnetic waves and X-rays, FDTD parallel computing of fundamental scattering and attenuation characteristics of X-ray for medical imaging diagnosis, orthogonal relations of electromagnetic fields including evanescent field in dispersive medium. (author)

Radiation Processed Materials in Products from Polymers for Agricultural Applications in China. Chapter 7

Energy Technology Data Exchange (ETDEWEB)

Zhai, M. [Beijing National Laboratory for Molecular Sciences, Department of Applied Chemistry, College of Chemistry and Molecular Engineering, Peking University, Beijing (China); Wu, G. [Shanghai Institute of Applied Physics, Chinese Academy of Science (China); Xu, L. [Beijing Key Laboratory for Solid Waste Utilization and Management, Department of Energy and Resources Engineering, College of Engineering, Peking University, Beijing (China)

2014-07-15

Oligochitosan has been found to be water-soluble and effective to elicit multiple plant defense responses. In China, Peking University and Shanghai Institute of Applied Physics, Chinese Academy of Science investigated on the radiation degradation of chitosan. The results showed that the molecular weight (Mw) of more than 95% of chitosan was lower than 3000 with narrower Mw distribution when compared with enzyme radiolysis products. The mechanism of radiation degradation was well elucidated. The technology was transfer to Xiamen Blue Bay Co. Ltd and Jiaxing Kerui Biology Technology Co. Ltd by Peking University and Shanghai Applied Physics Institute, China Academic, respectively. The oligochitosan was used to produce animal feeds for health care drug, aquaculture feed for shrimp and fish, animal feed for bird species, animal feed for piglet and so on. Data for the mentioned applications as well as the promotion of cucumber growth was shown. In summary, oligochitosan prepared by radiation degradation has marvelous prospects on enhancing animal breed and plant growth at low cost. (author)

Radiation safety aspects in the use of radiation sources in industrial and heath-care applications

International Nuclear Information System (INIS)

Venkat Raj, V.

2001-01-01

The principle underlying the philosophy of radiation protection and safety is to ensure that there exists an appropriate standard of protection and safety for humans, without unduly limiting the benefits of the practices giving rise to exposure or incurring disproportionate costs in interventions. To realise these objectives, the International Commission on Radiation Protection (ICRP-60) and IAEA's Safety Series (IAEA Safety Series 120, 1996) have enunciated the following criteria for the application and use of radiation: (1) justification of practices; (2) optimisation of protection; (3) dose limitation and (4) safety of sources. Though these criteria are the basic tenets of radiation protection, the radiation hazard potentials of individual applications vary and the methods to achieve the above mentioned objectives principles are different. This paper gives a brief overview of the various applications of radiation and radioactive sources in India, their radiation hazard perspective and the radiation safety measures provided to achieve the basic radiation protection philosophy. (author)

Future Prospects: Ionization Radiation Processing Technology. Chapter 12

International Nuclear Information System (INIS)

Rida Tajau

2017-01-01

This final chapter concluded that the ionizing radiation processing technology was potentially used to develop new and advanced products. The new advanced products which been discussed was HBPUA, printing ink, PSA, hydrogel, bioplastic, SWA, CNT, RVNRL and others. With this new innovative technology, it will develop the country's economy and increase the productivity of manufacturing industry, medical, science and technology and also strenghten the social science field.

Shape Morphing Adaptive Radiator Technology (SMART) for Variable Heat Rejection

Science.gov (United States)

Erickson, Lisa

2016-01-01