WorldWideScience

Sample records for radiation safety training

  1. A survey of radiation safety training among South African interventionalists

    Directory of Open Access Journals (Sweden)

    A Rose

    2018-04-01

    Full Text Available Background. Ionising radiation is increasingly being used in modern medicine for diagnostic, interventional and therapeutic purposes. There has been an improvement in technology, resulting in lower doses being emitted. However, an increase in the number of procedures has led to a greater cumulative dose for patients and operators, which places them at increased risk of the effects of ionising radiation. Radiation safety training is key to optimising medical practice.Objective. To present the perceptions of South African interventionalists on the radiation safety training they received and to offer insights into the importance of developing and promoting such training programmes for all interventionalists.Methods. In this cross-sectional study, we collected data from interventionalists (N=108 using a structured questionnaire.Results. All groups indicated that radiation exposure in the workplace is important (97.2%. Of the participants, the radiologists received the most training (65.7%. Some participants (44.1% thought that their radiation safety training was adequate. Most participants (95.4% indicated that radiation safety should be part of their training curriculum. Few (34.3% had received instruction on radiation safety when they commenced work. Only 62% had been trained on how to protect patients from ionising radiation exposure.Conclusion. Radiation safety training should be formalised in the curriculum of interventionalists’ training programmes, as this will assist in stimulating a culture of radiation protection, which in turn will improve patient safety and improve quality of care.

  2. Supervisor's experiments on radiation safety trainings in school of engineering

    International Nuclear Information System (INIS)

    Nomura, Kiyoshi

    2005-01-01

    Radiation safety training courses in School of Engineering, The University of Tokyo, were introduced. The number of radiation workers and the usage of radiation and radioisotopes have been surveyed for past 14 years. The number of radiation workers in School of Engineering has increased due to the treatment of X-ray analysis of materials, recently. It is important for workers to understand the present situation of School of Engineering before the treatment of radiation and radioisotopes. What the supervisor should tell to radiation workers were presented herewith. The basic questionnaires after the lecture are effective for radiation safety trainings. (author)

  3. Radiation safety training for accelerator facilities

    International Nuclear Information System (INIS)

    Trinoskey, P.A.

    1997-02-01

    In November 1992, a working group was formed within the U.S. Department of Energy's (DOE's) accelerator facilities to develop a generic safety training program to meet the basic requirements for individuals working in accelerator facilities. This training, by necessity, includes sections for inserting facility-specific information. The resulting course materials were issued by DOE as a handbook under its technical standards in 1996. Because experimenters may be at a facility for only a short time and often at odd times during the day, the working group felt that computer-based training would be useful. To that end, Lawrence Livermore National Laboratory (LLNL) and Argonne National Laboratory (ANL) together have developed a computer-based safety training program for accelerator facilities. This interactive course not only enables trainees to receive facility- specific information, but time the training to their schedule and tailor it to their level of expertise

  4. Computer-based and web-based radiation safety training

    Energy Technology Data Exchange (ETDEWEB)

    Owen, C., LLNL

    1998-03-01

    The traditional approach to delivering radiation safety training has been to provide a stand-up lecture of the topic, with the possible aid of video, and to repeat the same material periodically. New approaches to meeting training requirements are needed to address the advent of flexible work hours and telecommuting, and to better accommodate individuals learning at their own pace. Computer- based and web-based radiation safety training can provide this alternative. Computer-based and web- based training is an interactive form of learning that the student controls, resulting in enhanced and focused learning at a time most often chosen by the student.

  5. Ionising radiation safety training in the Australian Defence Organisation (ADO)

    International Nuclear Information System (INIS)

    Jenks, G.J.; O'Donovan, E.J.B.; Wood, W.B.

    1998-01-01

    Training personnel in ionising radiation safety within the Australian Defence Organisation (ADO) requires addressing some unique features of an organisation employing both military and civilian personnel. Activities may include those of a civil nature (such as industrial and medical radiography), specific military requirements (for training and emergency response) and scientific research and development. Some personnel may be assigned to full-time duties associated with radiation. However, most are designated as radiation protection officers as a secondary duty. A further complication is that most military personnel are subjected to postings at regular intervals. The ADO's Directorate of Defence Occupational Health and Safety has established an Ionising Radiation Safety Subcommittee to monitor not only the adequacy of the internal Ionising Radiation Safety Manual but also the training requirements. A Training Course, responding to these requirements, has been developed to emphasize, basic radiation theory and protection, operation of radiation monitors available in the ADO, an understanding of the Ionising Radiation Safety Manual, day-to-day radiation safety in units and establishments, and appropriate responses to radiation accidents and emergencies. In addition, students are briefed on a limited number of peripheral topics and participate in some site visits. Currently, two Courses are held annually, each with about twenty students. Most of the material is presented by ADO personnel with external contractor support. The three Courses held to date have proved successful, both for the students and the ADO generally. To seek national accreditation of the course through the Australian National Training Authority, as a first step, competency standards have been proposed. (authors)

  6. Systematic approach to training for competence building in radiation safety

    International Nuclear Information System (INIS)

    Asiamah, S.D.; Schandorf, C.; Darko, E.O.

    2003-01-01

    Competence building involves four main attributes, namely, knowledge, skills, operating experience and attitude to radiation safety. These multi-attribute requirements demand a systematic approach to education and training of regulatory staff, licensees/registrants and service providers to ensure commensurate competence in performance of responsibilities and duties to specified standards. In order to address issues of competencies required in radiation safety a national programme for qualification and certification has been initiated for regulatory staff, operators, radiation safety officers and qualified experts. Since the inception of this programme in 1993, 40 training events have been organized involving 423 individuals. This programme is at various levels of implementation due to financial and human resource constraints. A department for Human Resource Development and Research was established in 2000 to enhance and ensure the sustainability of the effectiveness of capacity building in radiation safety. (author)

  7. Ionising radiation safety training in the Australian defence organisation (ADO)

    International Nuclear Information System (INIS)

    Jenks, G.J.; O'Donovan, E.J.B.; Wood, W.B.

    1996-01-01

    Full text: Training personnel in ionising radiation safety within the Australian Defence Organisation (ADO) requires addressing some unique features of an organisation employing both military and civilian personnel. Activities may include those of a civil nature (such as industrial and medical radiography), specific military requirements (for training and emergency response) and scientific research and development. Some personnel may be assigned to full-time duties associated with radiation, while others may be designated as radiation protection officers in remote units with few duties to perform in this role. A further complication is that most military personnel are subjected to postings at regular intervals. The ADO's Directorate of Defence Occupational Health and Safety has established an Ionising Radiation Safety Subcommittee to monitor not only the adequacy of the internal Ionising Radiation Safety Manual but also the training requirements. A training course, responding to these requirements, has been developed to emphasise: basic radiation theory and protection; operation of radiation monitors available in the ADO; an understanding of the Safety Manual; day-to-day radiation safety in units and establishments; and appropriate responses to radiation accidents and emergencies. In addition, students are briefed on a limited number of peripheral topics and participate in some site visits. Currently, two Courses are held annually, each with about twenty students. Most of the material is presented by ADO personnel with external contractor support. The three Courses held to date have proved sufficiently successful, both for the students and the ADO generally, to seek national accreditation through the Australian National Training Authority and, as a first step, competency standards have been identified

  8. Radiation protection training of radiation safety officers in Finland in 2008

    International Nuclear Information System (INIS)

    Havukainen, R.; Bly, R.; Markkanen, M.

    2009-11-01

    The Radiation and Nuclear Safety Authority (STUK) carried out a survey on the radiation protection training of radiation safety officers (RSO) in Finland in 2008. The aim of the survey was to obtain information on the conformity and uniformity of the training provided in different training organisations. A previous survey concerning radiation protection training was carried out in 2003. That survey determined the training needs of radiation users and radiation safety officers as well the radiation protection training included in vocational training and supplementary training. This report presents the execution and results of the survey in 2008. According to the responses, the total amount of RSO training fulfilled the requirements presented in Guide ST 1.8 in the most fields of competence. The emphasis of the RSO training differed between organisations, even for training in the same field of competence. Certain issues in Guide ST 1.8 were dealt quite superficially or even not at all in some training programmes. In some fields of competence, certain matters were entirely left to individual study. No practical training with radiation equipment or sources was included in the RSO training programme of some organisations. Practical training also varied considerably between organisations, even within the same field of competence. The duties in the use of radiation were often considered as practical training with radiation equipment and sources. Practical training from the point of view of a radiation safety officer was brought up in the responses of only one organisation. The number of questions and criteria for passing RSO exams also varied between organisations. Trainers who provided RSO training for the use of radiation in health care sectors had reached a higher vocational training level and received more supplementary training in radiation protection in the previous 5 years than trainers who provided RSO training for the use of radiation in industry, research, and

  9. Innovative approach to training radiation safety regulatory professionals

    International Nuclear Information System (INIS)

    Gilley, Debbie Bray

    2008-01-01

    Full text: The supply of human resources required to adequately manage a radiation safety regulatory program has diminished in the last five years. Competing professional opportunities and a reduction in the number of health physics secondary schools have made it necessary to look at alternative methods of training. There are limited educational programs in the US that prepare our professionals for careers in the Radiation Regulatory Programs. The state of Florida's radiation control program embraced a new methodology using a combination of didactic and work experience using qualification journals, subject matter experts, and formalized training to develop a qualified pool of employees to perform the regulatory functions and emergency response requirements of a state radiation control program. This program uses a task-based approach to identify training needs and draws upon current staff to develop and implement the training. This has led to a task-oriented staff capable of responding to basic regulatory and emergency response activities within one year of employment. Florida's program lends itself to other states or countries with limited resources that have experienced staff attrition due to retirement or competing employment opportunities. Information on establishing a 'task-based' pool of employees that can perform basic regulatory functions and emergency response after one year of employment will be described. Initial task analysis of core functions and methodology is used to determine the appropriate training methodology for these functions. Instructions will be provided on the methodology used to 'mentor' new employees and then incorporate the new employees into the established core functions and be a useful employee at the completion of the first year of employment. New training philosophy and regime may be useful in assisting in the development of programs in countries and states with limited resources for training radiation protection personnel. (author)

  10. National training course on radiation safety, Its insertion in the cuban system of education and training

    International Nuclear Information System (INIS)

    Cornejo Diaz, Netor; Hernadez Saiz, Alejandro; Calli Fernadez, Ernesto; Perez Reyes, Yolanda

    2005-01-01

    The Center for Radiation Protection and Hygiene has been organizing, since more than ten years, the national training course on Radiation Safety, taking into account the particular needs of the Country in this area. The curriculum of the course, after some years of improvements, is showed and some aspects related to its design and insertion in the national system of education and training in Radiation Safety are discussed. The maintenance of an updated database of participants has demonstrated to be a very useful tool for dissemination of knowledge in Radiation Safety and for a continuously improvement of the imparted courses and offered services. The importance of the participation of the Regulatory Authority in the Course, from its organization phase, is also stressed

  11. Effect of the interval of training course on understanding of radiation safety and an improvement of re-training course

    International Nuclear Information System (INIS)

    Miyoshi, Hirokazu; Yamamoto, Yasuyo; Adachi, Akio

    2005-01-01

    Radiation safety training courses are indispensable educational programs for radiation workers. We have two kinds of courses, which are held before use of radioisotope (beginner's training course) and held annually (re-training course). The interval between two courses was found to give some effects for radiation worker's recognition and knowledge on radiation safety through the result of examination and questionnaire on the radiation safety after training. The average scores of participants indicated that the short interval (3 months) was better than the long interval (almost one year). Furthermore, the average scores of participants in the 2003 training course were higher than those in the 2002 and 2001 training courses. Several participants were found to lack in the basic radiation safety attitude and knowledge. In order to improve these results, the practical training should be given additionally for workers, who lacked in understanding. (author)

  12. Radiation safety requirements for training of users of diagnostic X ...

    African Journals Online (AJOL)

    Background. Globally, the aim of requirements regarding the use and ownership of diagnostic medical X-ray equipment is to limit radiation by abiding by the 'as low as reasonably achievable' (ALARA) principle. The ignorance of radiographers with regard to radiation safety requirements, however, is currently a cause of ...

  13. Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 2b, May 2013

    International Nuclear Information System (INIS)

    2013-05-01

    The IAEA Strategic Approach to Education and Training in Radiation, Transport and Waste Safety (2011-2020) provides a framework for establishing a sustainable education and training infrastructure in Member States that addresses national needs for building and maintaining competence in radiation, transport and waste safety that is consistent with IAEA Safety Standards. For this purpose, IAEA's General Conference has encouraged Member States to develop a national strategy for education and training, underlining the fundamental importance of sustainable programmes for building competence in radiation, transport and waste safety, as a key component of safety infrastructure. Furthermore Member States that receive assistance from IAEA are obliged to apply IAEA Safety Standards which require, inter alia, governments to establish a national policy and strategy for safety, including provisions for acquiring and maintaining the necessary competence nationally for ensuring safety. IAEA's Division of Radiation, Transport and Waste Safety is assisting Member States to develop their own national strategies in Asia and the Pacific via the Regional project RAS/9/066 on ''Strengthening Education and training Infrastructure, and Building Competence in Radiation Safety'', which includes, inter alia, Regional Workshops on National Strategies for education and training in radiation transport and waste safety. IAEA's Regional Training Centres (RTCs) in Malaysia and Syrian Arabic Republic are key partners in the Asian and the Pacific region.

  14. Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 2c, May 2013

    International Nuclear Information System (INIS)

    2013-05-01

    The IAEA Strategic Approach to Education and Training in Radiation, Transport and Waste Safety (2011-2020) provides a framework for establishing a sustainable education and training infrastructure in Member States that addresses national needs for building and maintaining competence in radiation, transport and waste safety that is consistent with IAEA Safety Standards. For this purpose, IAEA's General Conference has encouraged Member States to develop a national strategy for education and training, underlining the fundamental importance of sustainable programmes for building competence in radiation, transport and waste safety, as a key component of safety infrastructure. Furthermore Member States that receive assistance from IAEA are obliged to apply IAEA Safety Standards which require, inter alia, governments to establish a national policy and strategy for safety, including provisions for acquiring and maintaining the necessary competence nationally for ensuring safety. IAEA's Division of Radiation, Transport and Waste Safety is assisting Member States to develop their own national strategies in Europe via the Regional Project RER/9/109 on ''Strengthening Education and training Infrastructure, and Building Competence in Radiation Safety'', which includes, inter alia, Regional Workshops on National Strategies for education and training in radiation transport and waste safety. IAEA's Regional Training Centres (RTCs) in Greece and Belarus are key partners in the European region.

  15. Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 2d, June 2013

    International Nuclear Information System (INIS)

    2013-06-01

    The IAEA Strategic Approach to Education and Training in Radiation, Transport and Waste Safety (2011-2020) provides a framework for establishing a sustainable education and training infrastructure in Member States that addresses national needs for building and maintaining competence in radiation, transport and waste safety that is consistent with IAEA Safety Standards. For this purpose, IAEA's General Conference has encouraged Member States to develop a national strategy for education and training, underlining the fundamental importance of sustainable programmes for building competence in radiation, transport and waste safety, as a key component of safety infrastructure. Furthermore Member States that receive assistance from IAEA are obliged to apply IAEA Safety Standards which require, inter alia, governments to establish a national policy and strategy for safety, including provisions for acquiring and maintaining the necessary competence nationally for ensuring safety. IAEA's Division of Radiation, Transport and Waste Safety is assisting Member States to develop their own national strategies in Latin America via the Regional Project RLA/9/070 on ''Strengthening Education and training Infrastructure, and Building Competence in Radiation Safety'', which includes, inter alia, Regional Workshops on National Strategies for education and training in radiation transport and waste safety. IAEA's Regional Training Centres (RTCs) in Argentina and Brazil are key partners in the Latin-American region.

  16. Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 2a, May 2013

    International Nuclear Information System (INIS)

    2013-05-01

    The IAEA Strategic Approach to Education and Training in Radiation, Transport and Waste Safety (2011-2020) provides a framework for establishing a sustainable education and training infrastructure in Member States that addresses national needs for building and maintaining competence in radiation, transport and waste safety that is consistent with IAEA Safety Standards. For this purpose, IAEA's General Conference has encouraged Member States to develop a national strategy for education and training, underlining the fundamental importance of sustainable programmes for building competence in radiation, transport and waste safety, as a key component of safety infrastructure. Furthermore Member States that receive assistance from IAEA are obliged to apply IAEA Safety Standards which require, inter alia, governments to establish a national policy and strategy for safety, including provisions for acquiring and maintaining the necessary competence nationally for ensuring safety. IAEA's Division of Radiation, Transport and Waste Safety is assisting Member States to develop their own national strategies in Africa via the Regional project RAF/9/04 on ''Strengthening Education and training Infrastructure, and Building Competence in Radiation Safety'', which includes, inter alia, Regional Workshops on National Strategies for education and training in radiation transport and waste safety. AFRA Regional Designated Centres, in Algeria, Ghana and Morocco, equivalent to the IAEA's Regional Training Centres (RTCs) present in all the other regions, are key partners in the African region.

  17. A new standard for core training in radiation safety

    International Nuclear Information System (INIS)

    Trinoskey, P.A.

    1997-02-01

    A new American National Standard for radiation worker training was recently developed. The standard emphasizes performance-based training and establishing a training program rather than simply prescribing objectives. The standard also addresses basic criteria, including instructor qualifications. The standard is based on input from a wide array of regulatory agencies, universities, national laboratories, and nuclear power entities. This paper presents an overview of the new standard and the philosophy behind it. The target audience includes radiation workers, management and supervisory personnel, contractors, students, emergency personnel, and visitors

  18. Education and training on radiation safety for Asian countries

    International Nuclear Information System (INIS)

    Kitahara, Y.; Sakurai, N.; Kamei, M.

    1993-01-01

    The long-term program for development and Utilization of nuclear energy planned by Japan Atomic Energy Commission decided to promote the international corporation with Asian countries in nuclear fields. PNC (Power Reactor and Nuclear Fuel Development Corporation) has three programs in radiation safety field. They are STA program, JICA program and IAEA/RCA program. It is necessary to continue international cooperative activities to establish safety culture for development and utilization of nuclear energy in Asian countries

  19. Development of the video streaming system for the radiation safety training

    International Nuclear Information System (INIS)

    Uemura, Jitsuya

    2005-01-01

    Radiation workers have to receive the radiation safety training every year. It is very hard for them to receive the training within a limited chance of training. Then, we developed the new training system using the video streaming technique and opened the web page for the training on our homepage. Every worker is available to receive the video lecture at any time and at any place by using his PC via internet. After watching the video, the worker should receive the completion examination. It he can pass the examination, he was registered as a radiation worker by the database system for radiation control. (author)

  20. Radiation safety training for industrial irradiators: What are we trying to accomplish?

    International Nuclear Information System (INIS)

    Smith, M.A.

    1998-01-01

    Radiation safety training at an industrial irradiator facility takes a different approach than the traditional methods and topics used at other facilities. Where the more routine industrial radiation users focus on standard training topics of contamination control, area surveys, and the traditional dogma of time, distance, and shielding, radiation safety in an industrial irradiation facility must be centered on preventing accidents. Because the primary methods for accomplishing that goal are engineering approaches such as safety system interlocks, training provided to facility personnel should address system operation and emergency actions. This presents challenges in delivering radiation safety training to an audience of varied educational and technical background where little to no commercially available training material specific to this type of operation exists

  1. Five Years of a Computer Based New Training Program in Safety and Radiation Protection

    International Nuclear Information System (INIS)

    Ben-Shachar, B.; Tshuva, M.; Fitussi, I.; Ankri, D.

    2004-01-01

    One of the main goals of the Department of Human Resources Development is to give employees fundamental knowledge, refreshing know-how and increasing safety awareness. In this regard safety deals with risks in operating nuclear facilities, including radiation, industrial risks and fire. Israeli Work Supervision (informing and training employees, 1992) (1) and work safety regulations (industrial safety and health for ionization radiation employees) state the need for training by the employer at least once a year. The employer also must take means to verify that the employees actually understand what they were trained for

  2. 10 CFR 35.50 - Training for Radiation Safety Officer.

    Science.gov (United States)

    2010-01-01

    ... professional experience in health physics (graduate training may be substituted for no more than 2 years of the required experience) including at least 3 years in applied health physics; and (iii) Pass an examination... physics and instrumentation, radiation protection, mathematics pertaining to the use and measurement of...

  3. US Department of Energy standardized radiation safety training

    International Nuclear Information System (INIS)

    Trinoskey, P.A.

    1997-02-01

    The following working groups were formed under the direction of a radiological training coordinator: managers, supervisors, DOE auditors, ALARA engineers/schedulers/planners, radiological control personnel, radiation-generating device operators, emergency responders, visitors, Pu facilities, U facilities, tritium facilities, accelerator facilities, biomedical researchers. General courses for these groups are available, now or soon, in the form of handbooks

  4. A collaborative effort of medical and educational facilities for radiation safety training of nurses

    International Nuclear Information System (INIS)

    Matsuda, Naoki; Yoshida, Masahiro; Takao, Hideaki

    2005-01-01

    The proper understanding of radiation safety by nursing staffs in hospitals are essential not only for radiation protection of themselves against occupational radiation exposure but for quality nursing for patients who receive medical radiation exposure. The education program on radiation in nursing schools in Japan is, however, rather limited, and is insufficient for nurses to acquire basic knowledge of radiation safety and protection. Therefore, the radiation safety training of working nurses is quite important. A hospital-based training needs assignment of radiation technologists and radiologists as instructors, which may result in temporary shortage of these staffs for patients' services. Additionally, the equipments and facilities for radiation training in a hospital might not be satisfactory. In order to provide an effective education regarding radiation for working nurses, the radiation safety training course has been conducted for nurse of the university hospital by the collaboration of medical and educational staffs in Nagasaki University. This course was given for 6 hours in Radioisotope Research Center, a research and education facility for radiation workers using radioisotopes. The curriculum of this course included basics of radiation, effects of radiation on human health, procedures in clinical settings for radiation protection and practical training by using survey meters, which were mainly based on the radiation safety training for beginners according to the Japanese law concerning radiation safety with a modification to focus on medical radiation exposure. This course has been given to approximately 25 nurses in a time, and held 13 times in May 2000 through October 2003 for 317 nurse overall. The pre-instruction questionnaire revealed that 60% of nurses felt fears about radiation diagnosis or therapy, which reduced to less than 15% in the post-instruction surveillance. The course also motivated nurses to give an answer to patients' questions about

  5. Instructor qualification for radiation safety training at a national laboratory

    International Nuclear Information System (INIS)

    Trinoskey, P.A.

    1994-10-01

    Prior to 1993, Health Physics Training (HPT) was conducted by the Lawrence Livermore National Laboratory (LLNL) health physics group. The job requirements specified a Masters Degree and experience. In fact, the majority of Health Physicists in the group were certified by the American Board of Health Physics. Under those circumstances, it was assumed that individuals in the group were technically qualified and the HPT instructor qualification stated that. In late 1993, the Health Physics Group at the LLNL was restructured and the training function was assigned to the training group. Additional requirements for training were mandated by the Department of Energy (DOE), which would necessitate increasing the existing training staff. With the need to hire, and the policy of reassignment of employees during downsizing, it was imperative that formal qualification standards be developed for technical knowledge. Qualification standards were in place for instructional capability. In drafting the new training qualifications for instructors, the requirements of a Certified Health Physicists had to be modified due to supply and demand. Additionally, for many of the performance-based training courses, registration by the National Registry of Radiation Protection Technologists is more desirable. Flexibility in qualification requirements has been incorporated to meet the reality of ongoing training and the compensation for desirable skills of individuals who may not meet all the criteria. The qualification requirements for an instructor rely on entry-level requirements and emphasis on goals (preferred) and continuing development of technical and instructional capabilities

  6. Evaluation of a Radiation Worker Safety Training Program at a nuclear facility

    Energy Technology Data Exchange (ETDEWEB)

    Lindsey, J.E.

    1993-05-01

    A radiation safety course was evaluated using the Kirkpatrick criteria of training evaluation as a guide. Thirty-nine employees were given the two-day training course and were compared with 15 employees in a control group who did not receive the training. Cognitive results show an immediate gain in knowledge, and substantial retention at 6 months. Implications of the results are discussed in terms of applications to current radiation safety training was well as follow-on training research and development requirements.

  7. Evaluation of a Radiation Worker Safety Training Program at a nuclear facility

    International Nuclear Information System (INIS)

    Lindsey, J.E.

    1993-05-01

    A radiation safety course was evaluated using the Kirkpatrick criteria of training evaluation as a guide. Thirty-nine employees were given the two-day training course and were compared with 15 employees in a control group who did not receive the training. Cognitive results show an immediate gain in knowledge, and substantial retention at 6 months. Implications of the results are discussed in terms of applications to current radiation safety training was well as follow-on training research and development requirements

  8. Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 3, May 2014

    International Nuclear Information System (INIS)

    2014-05-01

    Building competence through education and training in radiation protection, radioactive waste safety, and safety in transport of radioactive material is fundamental to the establishment of a comprehensive and sustainable national infrastructure for radiation safety, which in turn is essential for the beneficial uses of radiation while ensuring appropriate protection of workers, patients, the public and the environment. IAEA’s Division of Radiation, Transport and Waste Safety provides direct assistance to Member States via a range of tools and mechanisms, such as by organizing educational and training events, developing standardized syllabi with supporting material and documents, and by fostering methodologies to build sustainable competence and enhance effectiveness in the provision of training. The main objective is to support Member States in the application of the IAEA Safety Standards. Seminars and additional activities are also promoted to broaden knowledge on relevant areas for an effective application of the standards

  9. The present condition of the radiation safety control education in training schools for radiological technologists

    International Nuclear Information System (INIS)

    Takahashi, Yasuyuki; Saito, Kyoko; Hirai, Shoko; Igarashi, Hiroshi; Negishi, Tooru; Hirano, Kunihiro; Kawaharada, Yasuhiro

    2010-01-01

    We made a detailed study on the course of study in radiation safety control prescribed on March 28, 2003. Questionnaires were sent to 39 training schools for radiological technology, to which 66.7% replied (26/39). Subjects on radiation safety control must include knowledge and technology in both radiation control and medical safety. The contents for instruction of radiation control were in accordance with those given in the traditional program; however, some discrepancies were found in the contents of medical safety. As medical safety, emphasized by the revised Medical Service Law, is regarded as very important by many hospitals, safety control education that include medical ethics should be required as part of the curriculum in the training schools for radiological technologists. (author)

  10. Consequences of the new Slovenian legislation on radiation protection and nuclear safety for radiation protection training

    International Nuclear Information System (INIS)

    Kozelj, M.

    2004-01-01

    The paper presents brief description of the old Slovenian regulations and an overview of the new, harmonised regulations in the field of radiation protection training. The most important novelties were pointed out with possible consequences for the implementation of radiation protection training. Some suggestions on how to overcome transitional problems and how to improve training were also given. (author)

  11. Survey and analysis of radiation safety management systems at medical institutions. Initial report. Radiation protection supervisor, radiation safety organization, and education and training

    International Nuclear Information System (INIS)

    Ohba, Hisateru; Ogasawara, Katsuhiko; Aburano, Tamio

    2005-01-01

    In this study, a questionnaire survey was carried out to determine the actual situation of radiation safety management systems in Japanese medical institutions with nuclear medicine facilities. The questionnaire consisted of questions concerning the Radiation Protection Supervisor license, safety management organizations, and problems related to education and training in safety management. Analysis was conducted according to region, type of establishment, and number of beds. The overall response rate was 60%, and no significant difference in response rate was found among regions. Medical institutions that performed nuclear medicine practices without a radiologist participating accounted for 10% of the total. Medical institutions where nurses gave patients intravenous injections of radiopharmaceuticals as part of the nuclear medicine practices accounted for 28% of the total. Of these medical institutions, 59% provided education and training in safety management for nurses. The rate of acquisition of Radiation Protection Supervisor licenses was approximately 70% for radiological technologists and approximately 20% for physicians (regional difference, p=0.02). The rate of medical institutions with safety management organizations was 71% of the total. Among the medical institutions (n=208) without safety management organizations, approximately 56% had 300 beds or fewer. In addition, it became clear that 35% of quasi-public organizations and 44% of private organizations did not provide education and training in safety management (p<0.001, according to establishment). (author)

  12. DOE contractor radiation safety CBT [computer based training] course

    International Nuclear Information System (INIS)

    Gardner, P.R.

    1986-01-01

    Westinghouse Hanford Company developed a generic Radiation Worker safety CBT course for Department of Energy contractors. Task analysis concentrated on actual and potential tasks and included visits to fourteen different contractor sites. Team Design and Prototype verification formed the major portion of the development phase. Lesson entry was accomplished using the WISE author system from WICAT Systems, Inc. The course features graded task simulations for both Pretest and Final; fourteen Topics in five Lessons, each Topic keyed to ''Critical Acts'' and Questions in the Pretest and Final; Automatic, Intensive, and Manual modes of instruction available for each Lesson; Practical Problems and Sample Questions associated with each Topic; and provisions for local configuration in several areas. The course is deliverable on IBM PC compatible equipment. 2 refs

  13. Training in nuclear and radiation safety in Latin American and Caribbean

    International Nuclear Information System (INIS)

    Papadopulos, S.; Diaz, O.; Larcher, A.; Echenique, L.; Nicolas, R.; Lombardi, R.; Quintana, G.

    2013-01-01

    From thirty-three years, Argentina has taken the commitment to train professionals in the field of nuclear and radiation safety for the care and protection of workers and public in general. Sponsored by the IAEA and supported by the Faculty of Engineering of the University of Buenos Aires (FIUBA), an undertaking was made to encourage the training of scientists and experts in the countries of the region in order to establish a strong safety culture in radiation in individuals and maintaining high standards of safety practices using ionizing radiation. In 2012, the Graduate Course in Radiation Protection and Safety of Radiation Sources has acquired the status of 'Specialization' of the FIUBA, a category that further hierarchies skills training in the subject. This is a highly anticipated achievement by the implications for academic institutions, national and regional level, contributing to the strengthening of the Regional Training Center for Latin America and the Caribbean, acknowledged in a long-term agreement between the IAEA and Argentina in September 2008. Due to increased demand for nuclear activity, it is important to continue and deepen further training in radiological and nuclear areas. In order to satisfy both national and regional needs a process of increase on training offer training is being carried out, under the jurisdiction frame of the Nuclear Regulatory Authority. This paper presents the achievements of the country so far as regards training of human resource in radiation protection and nuclear safety in the region and highlights the challenges ahead for the extension of the offer in education and training. (author)

  14. Radiation safety

    International Nuclear Information System (INIS)

    Jain, Priyanka

    2014-01-01

    The use of radiation sources is a privilege; in order to retain the privilege, all persons who use sources of radiation must follow policies and procedures for their safe and legal use. The purpose of this poster is to describe the policies and procedures of the Radiation Protection Program. Specific conditions of radiation safety require the establishment of peer committees to evaluate proposals for the use of radionuclides, the appointment of a radiation safety officer, and the implementation of a radiation safety program. In addition, the University and Medical Centre administrations have determined that the use of radiation producing machines and non-ionizing radiation sources shall be included in the radiation safety program. These Radiation Safety policies are intended to ensure that such use is in accordance with applicable State and Federal regulations and accepted standards as directed towards the protection of health and the minimization of hazard to life or property. It is the policy that all activities involving ionizing radiation or radiation emitting devices be conducted so as to keep hazards from radiation to a minimum. Persons involved in these activities are expected to comply fully with the Canadian Nuclear Safety Act and all it. The risk of prosecution by the Department of Health and Community Services exists if compliance with all applicable legislation is not fulfilled. (author)

  15. Multidisciplinary training program to create new breed of radiation monitor: the health and safety technician

    International Nuclear Information System (INIS)

    Vance, W.F.

    1979-01-01

    A multidiscipline training program established to create a new monitor, theHealth and Safety Technician, is described. The training program includes instruction in fire safety, explosives safety, industrial hygiene, industrial safety, health physics, and general safety practices

  16. A collaborative effort of medical and educational facilities for radiation safety training of nurses

    International Nuclear Information System (INIS)

    Matsuda, Naoki; Yoshida, Masahiro; Takao, Hideaki

    2004-01-01

    The radiation safety training course has been conducted for nurses of the university hospital by the collaboration of medical and educational staffs in Nagasaki University. This course was given for 6 hours covering basics of radiation, effects on human body, tips for radiation protection in clinical settings, and practical training, to more than 350 nurses overall. The pre-instruction survey by questionnaire revealed that 60% of nurses felt fears about radiation when they care for patients, which reduced to less than 15% in the post-instruction survey. The course also motivated nurses to give an answer patients' questions about radiation safety. In contrast, more than 30% of nurses were aware of neither their glass badge readings nor the maximum dose limit of radiation exposure even after the course. These results suggested that medical-educational collaborative training for nurses were effective on reducing nurses' fears about radiation and that repeated and continuous education would be necessary to establish their practice for radiation protection. (author)

  17. Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 1, August 2012

    International Nuclear Information System (INIS)

    2012-08-01

    The IAEA has a statutory function to establish standards for the protection of health, life and property against ionizing radiation and to provide for the application of these standards to peaceful nuclear activities. Education and training (E and T) is one of the main mechanisms to provide support to Member States in the application of the standards. In 2000, an internal evaluation of the overall education and training programme was undertaken. The conclusions were that the provision of and support for E and T in Member States tended to be on a reactive rather than proactive basis, contributing to a culture of dependency rather than sustainability. On the basis of this evaluation, a strategic approach to education and training in radiation and waste safety was developed that outlined the objectives and outcomes to be achieved over a ten year period (2001-2010). General Conference Resolutions have underlined or emphasized the importance of sustainable programmes for education and training in radiation, transport and waste safety, and have also welcomed the ongoing commitment of the Secretariat and Member States to the implementation of the strategy. A Steering Committee for Education and Training in Radiation Protection and Waste Safety was established in 2002, with the mission of advising the IAEA on the implementation of the strategy and making recommendations as appropriate. In 2010, the Steering Committee analysed the overall achievement of the strategic approach 2011-2010, refined the vision of the original strategy and redefined the related objectives. The Strategic Approach to Education and Training in Radiation, Transport and Waste Safety (2011-2020) was submitted to the IAEA's policy-making organs and was noted by its Board of Governors in September 2010.

  18. A survey of radiation safety training among South African ...

    African Journals Online (AJOL)

    Background. Ionising radiation is increasingly being used in modern medicine for diagnostic, interventional and therapeutic purposes. There has been an improvement in technology, resulting in lower doses being emitted. However, an increase in the number of procedures has led to a greater cumulative dose for patients ...

  19. Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 4, August 2014

    International Nuclear Information System (INIS)

    2014-08-01

    IAEA’s Division of Radiation, Transport and Waste Safety is assisting Member States to develop national strategies for education and training in radiation, transport and waste safety via the regional projects on “Strengthening Education and Training Infrastructure, and Building Competence in Radiation Safety” (RAF/9/04, RAS/9/066, RER/9/109 and RLA/9/070). The regional workshops conducted in 2012 in this area and the results achieved were presented in the previous issues of this newsletter focussing specifically on each region of the Technical Cooperation Programme (Africa, Asia and the Pacific, Europe and Latin America). In the course of 2013, a new cycle of Regional Workshops was conducted. The workshops held in the regions of Africa, Asia and the Pacific, and Europe mainly focussed on Sharing Experience and Progress made in establishing a National Strategy for Education and Training in Radiation, Transport and Waste Safety (pages 2-5). The workshop held in the region of Latin America mainly focussed on Developing and Implementing Education and Training programmes. An overview on the results achieved by participating Member States for the period 2012-2013 is provided

  20. Radiation safety

    International Nuclear Information System (INIS)

    1996-04-01

    Most of the ionizing radiation that people are exposed to in day-to-day activities comes from natural, rather than manmade, sources. The health effects of radiation - both natural and artificial - are relatively well understood and can be effectively minimized through careful safety measures and practices. The IAEA, together with other international and expert organizations, is helping to promote and institute Basic Safety Standards on an international basis to ensure that radiation sources and radioactive materials are managed for both maximum safety and human benefit

  1. Training Programs on Radiological Safety for users of Ionizing Radiations in Peru

    International Nuclear Information System (INIS)

    Medina Gironzini, E.

    2003-01-01

    In Peru, people who work with ionizing radiations must have an authorization (Individual License) as established in the Radiological Safety Regulations, which are the mandatory rules. The Technical Office of the National Authority (OTAN), which is the technical organ of the Peruvian Institute of Nuclear Energy (IPEN) in charge of controlling radiations within the country , grants the authorization after the candidate demonstrates that he/she knows the specific use of the technique using radiations, as well a s the aspects related to safety and radiological protection. Since it was created in 1972, the Superior Center of Nuclear Studies (VSEN) from IPEN has carried out different training courses so that people can work safety with ionizing radiations in medicine, industry and investigation. The analysis of the radiological safety programs carried out by CSEN during the last 30 years, which allowed the training of more than 2200 people in the country and, at the same time, made possible the securing of the respective Individual License, is presented in this work. The courses, nuclear medicine, radiotherapy, industrial radiography, nuclear gauges gamma irradiator, etc...) and are part of the continuous education program of CSEN. (Author)

  2. Radiation safety

    International Nuclear Information System (INIS)

    Van Riessen, A.

    2002-01-01

    Full text: Experience has shown that modem, fully enclosed, XRF and XRD units are generally safe. This experience may lead to complacency and ultimately a lowering of standards which may lead to accidents. Maintaining awareness of radiation safety issues is thus an important role for all radiation safety officers. With the ongoing progress in technology, a greater number of radiation workers are more likely to use a range of instruments/techniques - eg portable XRF, neutron beam analysis, and synchrotron radiation analysis. The source for each of these types of analyses is different and necessitates an understanding of the associated dangers as well as use of specific radiation badges. The trend of 'suitcase science' is resulting in scientists receiving doses from a range of instruments and facilities with no coordinated approach to obtain an integrated dose reading for an individual. This aspect of radiation safety needs urgent attention. Within Australia a divide is springing up between those who work on Commonwealth property and those who work on State property. For example a university staff member may operate irradiating equipment on a University campus and then go to a CSIRO laboratory to operate similar equipment. While at the University State regulations apply and while at CSIRO Commonwealth regulations apply. Does this individual require two badges? Is there a need to obtain two licences? The application of two sets of regulations causes unnecessary confusion and increases the workload of radiation safety officers. Radiation safety officers need to introduce risk management strategies to ensure that both existing and new procedures result in risk minimisation. A component of this strategy includes ongoing education and revising of regulations. AXAA may choose to contribute to both of these activities as a service to its members as well as raising the level of radiation safety for all radiation workers. Copyright (2002) Australian X-ray Analytical

  3. Radiation safety audit

    International Nuclear Information System (INIS)

    Kadadunna, K.P.I.K.; Mod Ali, Noriah

    2008-01-01

    Audit has been seen as one of the effective methods to ensure harmonization in radiation protection. A radiation safety audit is a formal safety performance examination of existing or future work activities by an independent team. Regular audit will assist the management in its mission to maintain the facilities environment that is inherently safe for its employees. The audits review the adequacy of facilities for the type of use, training, and competency of workers, supervision by authorized users, availability of survey instruments, security of radioactive materials, minimization of personnel exposure to radiation, safety equipment, and the required record keeping. All approved areas of use are included in these periodic audits. Any deficiency found in the audit shall be corrected as soon as possible after they are reported. Radiation safety audit is a proactive approach to improve radiation safety practices and identify and prevent any potential radiation accident. It is an excellent tool to identify potential problem to radiation users and to assure that safety measures to eliminate or reduce the problems are fully considered. Radiation safety audit will help to develop safety culture of the facility. It is intended to be the cornerstone of a safety program designed to aid the facility, staff and management in maintaining a safe environment in which activities are carried out. The initiative of this work is to evaluate the need of having a proper audit as one of the mechanism to manage the safety using ionizing radiation. This study is focused on the need of having a proper radiation safety audit to identify deviations and deficiencies of radiation protection programmes. It will be based on studies conducted on several institutes/radiation facilities in Malaysia in 2006. Steps will then be formulated towards strengthening radiation safety through proper audit. This will result in a better working situation and confidence in the radiation protection community

  4. IAEA education and training in radiation protection, transport and waste safety-status and new developments for sustainability

    International Nuclear Information System (INIS)

    Sadagopan, G.; Mrabit, K.; Wheatley, J.

    2008-01-01

    IAEA 's education and training activities in radiation, transport and waste safety follow the IAEA vision, strategy and resolutions of its annual General Conferences and reflect the latest IAEA standards and guidance. IAEA prepared a Strategic Approach to Education and Training in Radiation and Waste Safety (Strategy on Education and Training) aiming at establishing, by 2010, sustainable education and training programmes in Member States, which was endorsed by the GC(45)/RES/10C in 2001. In implementing the strategy, IAEA is organising training events at the regional level and assisting the Member States at the national level by providing them the exemplary quality of training material developed at the IAEA. This work will continue ensuring its completeness in all areas of radiation safety. An Inter Centre Network between the Agency and regional, collaborating national training centres is established to facilitate information exchange, improve communication and dissemination of training material. There is a challenge to enhance the technical capability of the Member States to reach sustainability. This is intended through organising number of Train the Trainers events to develop a pool of qualified trainers. The new developments include establishing E-learning, developing a syllabus for training of Radiation Protection Officers and training materials, information materials for radiation workers. These are aimed at assisting Member States attain self sustainability. (author)

  5. Building competence in radiation and nuclear safety through education and training - the approach of a national regulatory authority

    International Nuclear Information System (INIS)

    Karfopoulos, K.L.; Carinou, E.; Kamenopoulou, V.; Dimitriou, P.; Housiadas, Ch.

    2015-01-01

    The Greek Atomic Energy Commission (EEAE) is the national competent authority for radiation and nuclear safety and security as well as for the radiation protection of ionizing and artificially produced non-ionizing radiation. The legal framework determines, inter alia, the responsibilities in education and training issues. The EEAE has a range of activities, in providing postgraduate and continuous education and training on radiation protection, and nuclear safety and security, at the national and international levels. At the national level, and particularly in the medical field, the EEAE is a participant in and a major contributor to the Inter-University Postgraduate Program on Medical Radiation Physics. Since 2003, the EEAE has been the Regional Training Center (RTC) for radiation, transport and waste safety of the International Atomic Energy Agency (IAEA) for the European Region in the English language. Moreover, the EEAE has also been recognized as the IAEA's Regional Training Center (RTC) in nuclear security in the English language since 2013. The EEAE recently proceeded to two significant initiatives: the design of a national program for education and training, and the certification of the Department of Education according to ISO 29990:2010. In this paper, the initiatives taken to enhance the radiation protection system in the country through education and training are presented. (authors)

  6. The Training Requirements for the Workers a Legal Instrument to Ensure the Safety Use of the Ionizing Radiation Sources

    International Nuclear Information System (INIS)

    Rosca, G.; Coroianu, A.; Stanescu, G.

    2009-01-01

    Recognizing the need for a graded and commensurate with the practice associated risk approach, the Romanian Regulatory Authority developed the legal framework for defining the roles, duties and responsibilities for the radiation workers (RWs) and the radiological safety officer (RPO). The licensee is responsible to provide for the RWs basic knowledge and understanding of radiation proprieties, good knowledge of the local rules and the operational radiation protection methods and the safety features of the devices, on the job training under the supervision of a RPO or a qualified expert (RPE). Every 5 years the participation to a refresher course is required

  7. IAEA activities on education and training in radiation and waste safety: Strategic approach for a sustainable system

    International Nuclear Information System (INIS)

    Mrabit, Khammar; Sadagopan; Geetha

    2003-01-01

    The statutory safety functions of the International Atomic Energy Agency (IAEA) include the establishment of and provision for the application of safety standards for protection of health, life and property against ionizing radiation. The safety standards are based on the presumption that a national infrastructure is in place enabling the Government to discharge its responsibilities for protection and safety. Education and training is an essential element of the infrastructure. The IAEA education and training activities follows the resolutions of its General Conferences and reflects the latest IAEA standards and guidance. In response to GC(44)/RES/13, the IAEA prepared a 'Strategic Approach to Education and Training in Radiation and Waste Safety' aiming at establishing, by 2010, sustainable education a training programmes in Member States. This Strategy was endorsed by General Conference resolution GC(45)/RES/10C that, inter alia, urged the Secretariat to implement the Strategy on Education and Training and to continue to strengthen, subject to available resources, its current effort in this area, and in particular to assist Member States' national, regional and collaborating centres in conducting such education and training activities in the relevant official languages of the IAEA. In the last General Conference 2002, the IAEA was urged to continue to implement the Strategy, including the convening of the Steering Committee. The first Technical Committee meeting took place during the week 25-29 November 2002. (author)

  8. A cascade method of training for the revised CEGB Radiological Safety Rules and the Ionising Radiations Regulations 1985

    International Nuclear Information System (INIS)

    Jackson, J.R.; John, P.G.L.

    1986-01-01

    In order to achieve compliance with the Ionising Radiations Regulations 1985 the CEGB has introduced a revised set of Radiological Safety Rule. These Rules are for implementation at all sites under the Board's control where ionising radiations are used. It was a requirement that the new Safety Rules be brought into operation on a common date and to a consistent standard of performance throughout the industry; this necessitated a considerable training programme to familiarise and inform some 8,000 staff working at a large number of locations. The training week of identified groups of staff varied widely, according to their different levels of authority and responsibility. The paper sets out the means by which the chosen cascade method of training was selected and developed, and gives details of the modular package of training material which was produced. It also relates how the management objectives were met within the constraints of an uncompromising time schedule. (author)

  9. Safety training

    CERN Multimedia

    SC Unit

    2009-01-01

    Habilitation électrique A course entitled "Habilitation électrique pour personnel de laboratoire" (electrical safety qualification for laboratory personnel) will be held on 22 and 23 June. Registration by e-mail to isabelle.cusato@cern.ch. Explosion Hazards in the handling of flammable solvents and gases A course entitled "Explosion Hazards in the handling of flammable solvents and gases" given in French will be held on 18-19 June 2009. This course is obligatory for all FGSOs at CERN, and it is recommended for anyone handling flammable gas or solvents. To sign up please visit this page. For more information please contact Isabelle Cusato, tel. 73811.

  10. Radiation safety

    International Nuclear Information System (INIS)

    Woods, D.A.

    1982-01-01

    Sections include: dose units, dose limits, dose rate, potential hazards of ionizing radiations, control of internal and external radiation exposure, personal dosemeters, monitoring programs and transport of radioactive material (packaging and shielding)

  11. IAEA Activities on Education and training in Radiation and Waste Safety: Strategic approach for a sustainable system

    International Nuclear Information System (INIS)

    Marabit, K.; Sadagopan, G.

    2003-01-01

    The statutory safety functions of the International Atomic Energy(IAEA) include the establishment of and provision for the application of safety standards for protection of health, life and property against ionizing radiation. The safety standards are based on the presumption that a national infrastructure is in place, enabling the Government to discharge its responsibilities for protection and safety. Education and training is an essential element of the infrastructure. the IAEA education and training activities follow the resolutions of its General Conference and reflect the latest IAEA standards and guidance. Several General Conference resolutions have emphasized the importance of education and training (e. g. GC(XXXV)/RES/552 in 1991; GC(XXXVI)/RES/584 in 1992; GC(43)/RES/13 in 1999 and more recently GC(44)/RES/13 in 2000). In response to GC(44)/RES/13, the IAEA prepared a Strategic Approach to Education and Training in Radiation and Waste Safety (Strategy on Education and Training) aiming at establishing, by 2010, sustainable education and training programmes in its Member States. This Strategy was endorsed by the General Conference resolution GC(45)/RES/10C that, inter alia, urged the Secretariat to implement the Strategy on Education and Training, and to continue to strengthen, subject to available resources, its current effort in this area, and in particular to assist Member States national, regional and collaborating centres in conducting such education and training activities in the relevant official languages of the IAEA. A technical meeting was held in Vienna in March 2002 and concluded with an action plan for implementing the strategy up to 2010, the immediate action being the formation of a Steering Committee by the middle of 2002. This Steering Committee has the general remit to advise on the development and implementation of the strategy, as well as monitoring its progress. The first technical meeting of the Steering Committee took place on 25

  12. Radiation safety

    International Nuclear Information System (INIS)

    Auxier, J.A.

    1977-01-01

    Data available on the biological effects of radiation on man are reviewed, with emphasis on dose response to low LET and high LET radiation sources, and the effects of dose rate. Existing guides for radiation protection were formulated largely on the basis of tumor induction in the bone of radium dial painters, but the ICRP/NCRP annual dose guides of 5 rem/yr are of the same general magnitude as the doses received in several parts of the world from the natural radiation environment. Because of the greater sensitivity of rapidly dividing cells and the assumption that radiation occupations would not begin before the age of eighteen, maximum exposure levels were set as 5 (N-18) rem/yr, where N is the exposed worker's age in years. However, in the case of the natural radiation environment, exposure commences, in a sense, with the exposure of the ovum of the individual's mother; and the ovum is formed during the fetal development of the mother. In occupational exposures, the professional health physicist has always practiced the as low as practical philosophy, and exposures have generally averaged far below the guidelines. The average annual exposure of the radiation worker in modern plants and laboratories is approximately equal to the average natural radiation environment exposure rate and far lower than the natural radiation environment in many parts of the world. There are numerous complications and uncertainties in quantifying radiation effects on humans, however, the greatest is that due to having to extrapolate from high dose levels at which effects have been measured and quantified, to low levels at which most exposures occur but at which no effects have been observed

  13. Radiation safety

    International Nuclear Information System (INIS)

    Goetz, B.B.; Murphy, C.H.

    1987-01-01

    In medicine, as in other fields of scientific endeavor, the development of advanced and specialized techniques has resulted in increased hazards for employees. However, by possessing both an appreciation of the proper use of factors that regulate radiation exposure around radiology equipment and a knowledge of the biologic effects of radiation, which can include possible genetic and somatic consequences, it is possible to maximize the usefulness of these valuable procedures while minimizing the risk to medical personnel involved with patient care

  14. Occupational Exposure to Diagnostic Radiology in Workers without Training in Radiation Safety

    International Nuclear Information System (INIS)

    Gaona, Enrique; Enriquez, Jesus G. Franco

    2004-01-01

    The physicians, technicians, nurses, and others involved in radiation areas constitute the largest group of workers occupationally exposed to man-made sources of radiation. Personnel radiation exposure must be monitored for safety and regulatory considerations, this assessment may need to be made over a period of one month or several months. The purpose of this study was to carry out an exploratory survey of occupational exposures associated with diagnostic radiology. The personnel dosimeters used in this study were thermoluminescent dosimeters (TLDs). The reported number of monitored workers was 110 of different departments of radiology of the Mexican Republic without education in radiation safety, included general fluoscopic/radiographic imaging, computed tomography and mammography procedures. Physicians and X-ray technologist in diagnostic radiology receive an average annual effective dose of 2.9 mSv with range from 0.18 to 5.64 mSv. The average level of occupational exposures is generally similar to the global average level of natural radiation exposure. The annual global per capita effective dose due to natural radiation sources is 2.4 mSv (UNSCEAR 2000 Report). There is not significant difference between average occupational exposures and natural radiation exposure for p < 0.05

  15. Promoting safety mindfulness: Recommendations for the design and use of simulation-based training in radiation therapy

    Directory of Open Access Journals (Sweden)

    Lukasz M. Mazur, PhD

    2018-04-01

    Full Text Available There is a need to better prepare radiation therapy (RT providers to safely operate within the health information technology (IT sociotechnical system. Simulation-based training has been preemptively used to yield meaningful improvements during providers' interactions with health IT, including RT settings. Therefore, on the basis of the available literature and our experience, we propose principles for the effective design and use of simulated scenarios and describe a conceptual framework for a debriefing approach to foster successful training that is focused on safety mindfulness during RT professionals' interactions with health IT.

  16. First training course about protection and radiological safety for responsible in radiation protection in nuclear medicine and /or radiotherapy practices

    International Nuclear Information System (INIS)

    2002-08-01

    The Training course provide guidance of the detection and radiation measurement, radioactivity elements and dosimetry, regulatory standards, regulatory organization and practices works and the diary training course

  17. Radiation safety among cardiology fellows.

    Science.gov (United States)

    Kim, Candice; Vasaiwala, Samip; Haque, Faizul; Pratap, Kiran; Vidovich, Mladen I

    2010-07-01

    Cardiology fellows can be exposed to high radiation levels during procedures. Proper radiation training and implementation of safety procedures is of critical importance in lowering physician health risks associated with radiation exposure. Participants were cardiology fellows in the United States (n = 2,545) who were contacted by e-mail to complete an anonymous survey regarding the knowledge and practice of radiation protection during catheterization laboratory procedures. An on-line survey engine, SurveyMonkey, was used to distribute and collect the results of the 10-question survey. The response rate was 10.5%. Of the 267 respondents, 82% had undergone formal radiation safety training. Only 58% of the fellows were aware of their hospital's pregnancy radiation policy and 60% knew how to contact the hospital's radiation safety officer. Although 52% of the fellows always wore a dosimeter, 81% did not know their level of radiation exposure in the previous year and only 74% of fellows knew the safe levels of radiation exposure. The fellows who had received formal training were more likely to be aware of their pregnancy policy, to know the contact information of their radiation safety officer, to be aware of the safe levels of radiation exposure, to use dosimeters and RadPad consistently, and to know their own level of radiation exposure in the previous year. In conclusion, cardiology fellows have not been adequately educated about radiation safety. A concerted effort directed at physician safety in the workplace from the regulatory committees overseeing cardiology fellowships should be encouraged. Published by Elsevier Inc.

  18. Radiation Protection Training in Lithuania

    International Nuclear Information System (INIS)

    Jankauskiene, D.

    2003-01-01

    Radiation Protection Training is an important component of Radiation Protection and serves for human radiation safety. According to the Lithuanian Law on Radiation Protection the legal persons and enterprises without the status of legal persons to conduct practices with sources or which workers work under exposure must organize at their own expenses a compulsory training and assessment of knowledge of the workers engaging in activities with the sources and radiation protection officers. Such training has been started in 1999. In Lithuania there are few institutions executing Radiation Protection training. Under requirements of legal act On Frequency and Procedure of Compulsory Training and Assessment Knowledge of the Workers Engage in Activities with the Sources of Ionising Radiation and Radiation Protection Officers these institutions have to prepare and coordinate training programs with the Radiation Protection Center. There are adopted different educating programs for Radiation Protection Training to the Workers and Radiation Protection Officers depending on character of work and danger of sources. The duration of Training is from 30 to 270 hours. The Training shall be renewed every five years passing 30 hors course. To ensure the adequate quality of training a great deal of attention is paid to qualifying the lectures. For this purpose, it was established an Evaluation commission to estimate the adequacy of lecturer's knowledge to requirements of Training programs. After passing exams the lectures get the qualification confirming certificates. The main task of our days is to establish and arrange the National Training Centre on Radiation Protection Training that would satisfy requirements and recommendations of legal documents of IAEA and EU for such kind of institutions of institutions. (Author)

  19. Plutonium safety training course

    International Nuclear Information System (INIS)

    Moe, H.J.

    1976-03-01

    This course seeks to achieve two objectives: to provide initial safety training for people just beginning work with plutonium, and to serve as a review and reference source for those already engaged in such work. Numerous references have been included to provide information sources for those wishing to pursue certain topics more fully. The first part of the course content deals with the general safety approach used in dealing with hazardous materials. Following is a discussion of the four properties of plutonium that lead to potential hazards: radioactivity, toxicity, nuclear properties, and spontaneous ignition. Next, the various hazards arising from these properties are treated. The relative hazards of both internal and external radiation sources are discussed, as well as the specific hazards when plutonium is the source. Similarly, the general hazards involved in a criticality, fire, or explosion are treated. Comments are made concerning the specific hazards when plutonium is involved. A brief summary comparison between the hazards of the transplutonium nuclides relative to 239 Pu follows. The final portion deals with control procedures with respect to contamination, internal and external exposure, nuclear safety, and fire protection. The philosophy and approach to emergency planning are also discussed

  20. Improvement of the Nuclear Radiation Protection Training for the Simulator and on sharing method of the Safety Parameter with the Emergency Organization

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Sungjin; Park, Daeseung [KHNP Central Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    Radiation Emergency alert will be announced when the radiological impact is limited within the NPP or radiological impact to go out of the NPP. Radiation Protection Training is scheduled and proceeded to prevent for the radiation accidents, possibility of the radiation accidents, or radiation accident expansion, the training is to reduce the damage to property and health for the nuclear power plant worker and the people near the nuclear power plant. This paper shows the improvement of the nuclear radiation protection training for the simulator and on sharing method of the safety parameter with the emergency organization. Accident shall be correctly and quickly prevented when the NPP accident is inevitable. Therefore the radiation protection training for the operator and the emergency organization will be effective when the accident happens if the simulator has the same environment as the NPP.

  1. Operational radiation protection and radiation protection training

    International Nuclear Information System (INIS)

    Kraus, W.

    1989-01-01

    The radiation protection system in the German Democratic Republic (GDR) is reviewed. The competent authority (the SAAS) and its systems of licensing and supervision are described. Discussion covers the role of the Radiation Protection Officer, the types of radiation monitoring, medical surveillance programs and the classification of workers and work areas. Unusual occurrences in the GDR, 1963-1976, are presented and the occupational radiation protection problems at some specific types of workplaces are discussed. The GDR's system of training in radiation protection and nuclear safety is described. 5 figs., 18 tabs

  2. Food safety through the training of 2-alcilciclobutanonas in processed foods by ionizing radiation

    International Nuclear Information System (INIS)

    Alves, Rodrigo Mendes

    2016-01-01

    Food irradiation is a means of preserving food which uses a processing technique that exposes the foods at a controlled high energy ionizing radiation. The treatment with the use of ionizing radiation in foods has many applications technologically and technically feasible, including the ability to improve the microbiological safety and reducing levels of pathogenic bacteria, inhibiting the germination of tubers plant application, preserving stored foods or the stability of storage and is also used to increase the shelf life of certain products due to the reduction of contamination by microorganisms. Due to the increase of international trade in food and the growing regulatory requirements of consumer markets increasingly importing and exporting countries have shown interest in food irradiation and conducted research in the practical application of this technology and detection methods of treatment. Numerous surveys were conducted worldwide, resulting in efficient protocols to identify which foods were irradiated or not. Until then, the 'myth' that irradiated food could not be detected and they were not formed any single radiation products has been replaced by the knowledge that many changes can occur in irradiated foods and these changes could be used as tools to identify this technology. The radiation processing resulting in characteristic patterns formations of saturated hydrocarbons, aldehydes, methyl and ethyl esters and 2-alcilciclobutanonas, depending on the fatty acid composition of the lipid that composes the food. Thus the purpose of this study was to collect data to compare the effects of different doses of gamma radiation and electron in foods that have fat to determine possible changes resulting from the use of irradiation, as the presence of 2-Alcilciclobutanonas and also show main equipment used for food irradiation and its categories, with the aim of informing the general public. (author)

  3. New Radiation Protection training room

    CERN Multimedia

    HSE Unit

    2013-01-01

    From now on, the theory and practical components of the Radiation Protection training, developed by the RP Group and offered by the HSE Unit’s Safety Training team to people working in a Controlled Radiation Area, will take place in a dedicated teaching room, designed specifically for this kind of training.   The new room is in the Safety Training Centre on the Prévessin site and has been open since 16 October. It has an adjoining workshop that, like the room itself, can accommodate up to 12 people. It is also equipped with an interactive board as well as instruments and detectors to test for ionising radiation. This room is located near the recently inaugurated LHC tunnel mock-up where practical training exercises can be carried out in conditions almost identical to those in the real tunnel. To consult the safety training catalogue and/or sign up for Radiation Protection training, please go to: https://cta.cern.ch For further information, please contact the Safety Trainin...

  4. Establishing Sustainable Infrastructures for Education and Training in Radiation, Transport and Waste Safety: IAEA’s Approach to Support Member States

    International Nuclear Information System (INIS)

    Wheatley, John

    2014-01-01

    Summary: • IAEA General Conference has called upon MS to develop national strategies for education &training radiation, transport & waste safety; • IAEA has developed guidance, and is providing support to MSs; • IAEA Regional Training Centres are key partners with IAEA

  5. Training in nuclear and radiation safety in Latin American and Caribbean; Capacitacion en seguridad nuclear y radiologica en America Latina y el Caribe

    Energy Technology Data Exchange (ETDEWEB)

    Papadopulos, S.; Diaz, O.; Larcher, A.; Echenique, L.; Nicolas, R., E-mail: spapadopulos@arn.gob.ar, E-mail: odiaz@arn.gob.ar, E-mail: alarcher@arn.gob.ar, E-mail: lechenique@arn.gob.ar, E-mail: rnicolas@arn.gob.ar [Autoridad Regulatoria Nuclear (ARN), Buenos Aires (Argentina); Lombardi, R.; Quintana, G., E-mail: alombar@fi.uba, E-mail: quinta@fi.uba.ar [Universidad de Buenos Aires (FI/UBA), (Argentina). Facultad de Ingenieria

    2013-07-01

    From thirty-three years, Argentina has taken the commitment to train professionals in the field of nuclear and radiation safety for the care and protection of workers and public in general. Sponsored by the IAEA and supported by the Faculty of Engineering of the University of Buenos Aires (FIUBA), an undertaking was made to encourage the training of scientists and experts in the countries of the region in order to establish a strong safety culture in radiation in individuals and maintaining high standards of safety practices using ionizing radiation. In 2012, the Graduate Course in Radiation Protection and Safety of Radiation Sources has acquired the status of 'Specialization' of the FIUBA, a category that further hierarchies skills training in the subject. This is a highly anticipated achievement by the implications for academic institutions, national and regional level, contributing to the strengthening of the Regional Training Center for Latin America and the Caribbean, acknowledged in a long-term agreement between the IAEA and Argentina in September 2008. Due to increased demand for nuclear activity, it is important to continue and deepen further training in radiological and nuclear areas. In order to satisfy both national and regional needs a process of increase on training offer training is being carried out, under the jurisdiction frame of the Nuclear Regulatory Authority. This paper presents the achievements of the country so far as regards training of human resource in radiation protection and nuclear safety in the region and highlights the challenges ahead for the extension of the offer in education and training. (author)

  6. Safety training priorities

    Science.gov (United States)

    Thompson, N. A.; Ruck, H. W.

    1984-04-01

    The Air Force is interested in identifying potentially hazardous tasks and prevention of accidents. This effort proposes four methods for determining safety training priorities for job tasks in three enlisted specialties. These methods can be used to design training aimed at avoiding loss of people, time, materials, and money associated with on-the-job accidents. Job tasks performed by airmen were measured using task and job factor ratings. Combining accident reports and job inventories, subject-matter experts identified tasks associated with accidents over a 3-year period. Applying correlational, multiple regression, and cost-benefit analysis, four methods were developed for ordering hazardous tasks to determine safety training priorities.

  7. International Atomic Energy Agency Activities on Education and Training in Radiation Transport and Waste Safety: Strategic Approach for a Sustainable System

    International Nuclear Information System (INIS)

    Mrabit, K.; Sadagopan, G.

    2004-01-01

    The statutory safety functions of the International Atomic Energy Agency (IAEA) include the establishment of and provision for the application of safety standards for protection of health, life and property against ionizing radiation. The safety standards are based on the presumption that a national infrastructure is in place enabling the Government to discharge its responsibilities for protection and safety. Education and training is an essential element of the infrastructure. The IAEA education and training activities follows the resolutions of its General Conferences and reflects the latest IAEA standards and guidance. Several General Conference resolutions have emphasized the importance of education and training [e.g. GC(XXXV)/RES/552 in 1991; GC(XXXVI)/RES/584 in 1992; GC(43)/RES/13 in 1999 and more recently GC(44)/RES/13 in 2000]. In response to GC(44)/RES/13, the IAEA prepared a S trategic Approach to Education and Training in Radiation and Waste Safety ( Strategy on Education and Training) aiming at establishing, by 2010, sustainable education and training programmes in Member States. This Strategy was endorsed by the General Conference resolution GC(45)/RES/10C that, inter alia, urged the Secretariat to implement the Strategy on Education and Training, and to continue to strengthen, subject to available resources, its current effort in this area, and in particular to assist Member State' national, regional and collaborating centres in conducting such education and training activities in the relevant official languages of the IAEA. The General Conference resolutions GC(46)RES/9C in 2002 and GC(47)RES/7 in 2003 urged the Agency to continue its efforts to implement the Strategy. The purpose of this paper is to present the newly established Strategic Approach to Education and Training in Radiation, Transport and Waste Safety and its implementation. (Author)

  8. International Atomic Energy Agency Activities on Education and Training in Radiation, Transport and Waste Safety: Strategic Approach for a Sustainable System

    International Nuclear Information System (INIS)

    Marbit, K.; Sadagopan, G.

    2005-01-01

    The statutory safety functions of the international Atomic Energy Agency (IAEA) include the establishment of and provision for the application of safety standards for protection of health, life and property against ionizing radiation. The safety standards are based on the presumption that a national infrastructure is in place enabling the government to discharge its responsibilities for protection and safety. Education and training is an essential element of the infrastructure. The IAEA education and training activities follows the the resolutions of its general conferences and reflects the latest IAEA standards and guidance. several general conference resolutions have emphasized the importance of education and training (e.g. GC (XXXV)/RES/552 in 1991,GC (XXXVI)/ RES/584 in 1992, GC (43)/RES/13 in 1999 and more recently GC (44)/RES/13 in 2000). In response to GC (44) /RES/13, the IAEA prepared a strategic approach to education and training in radiation and waste safety (strategy on education and training) aiming at establishing, by 2010 sustainable education and training programmes in member states. This strategy was endorsed by the general conference resolution GC(45)/RES/10C that, inter alia, urged the secretariat to implement the strategy on education and training, and to continue to strengthen, subject to available resources, its current effort in this area, and in particular to assist Member States national, regional and collaborating centres in conducting such education and training activities in the relevant official languages of the IAEA. The General Conference resolutions GC(46)RES/9C in 2002 and GC(47)RES/7 in 2003 urged the Agency to continue its efforts to implement the Strategy. The purpose of this paper is to present the newly established Strategic Approach to Education and Training in Radiation, Transport and Waste Safety and its implementation

  9. Training in radiation protection

    International Nuclear Information System (INIS)

    Schreiber, F.

    1998-01-01

    Persons who are exposed to ionizing radiation at their workplace have to be trained in radiation protection. According to the Radiation Protection Ordinance the person with responsibility in radiation protection has to guarantee that the training is performed twice a year. Our training material was created especially for the persons defined in the Radiation Protection Ordinance and the X-ray Ordinance. It enables persons who teach (generally the radiation protection officer) to perform the training without tedious study and preparation of the documents. Our material is not just another textbook for radiation protection but rather a folder with colour transparencies and explanatory texts which make a difference in volume and price in comparison to other existing materials. (orig.) [de

  10. Safety training news

    CERN Multimedia

    Safety Training, HSE Unit

    2014-01-01

      SELF-RESCUE MASK The "Self-Rescue Mask" face-to-face training course has been replaced by a revised version. This measure concerns both the initial and the refresher course. For personnel who have successfully attended the initial or refresher Self-Rescue Mask training within the last three years, their Self-Rescue Mask training will still be valid.  The course description and registration form can be found in the training catalogue on the Safety Training Service’s website or catalogue. The Self-Rescue Mask training course is a mandatory prerequisite for following the new "Portable ODH Detector" e-learning course.   PORTABLE ODH DETECTOR A new e-learning awareness course, "Portable ODH Detector", is available via the SIR application on CERN’s intranet. Personnel requiring a portable ODH detector of the DRÄGER x-am 5000 type to allowed access th...

  11. Radiation safety at CERN

    Energy Technology Data Exchange (ETDEWEB)

    Hoefert, M [CERN, Geneva (Switzerland)

    1995-09-01

    CERN, the European Laboratory for Particle Physics, operates proton accelerators up to an energy of 450 GeV and an electron-positron storage ring in the 50 GeV energy range for fundamental high-energy particle physics. A strong radiation protection group assures the radiation safety of these machines both during their operation and in periods of maintenance and repair. Particular radiation problems in an accelerator laboratory are presented and recent developments in radiation protection at CERN discussed. (author)

  12. Radiation safety in aviation

    International Nuclear Information System (INIS)

    2005-06-01

    The guide presents the requirements governing radiation safety of aircrews exposed to cosmic radiation and monitoring of such exposure. It applies to enterprises engaged in aviation under a Finnish operating licence and to Finnish military aviation at altitudes exceeding 8,000 metres. The radiation exposure of aircrews at altitudes of less than 8,000 metres is so minimal that no special measures are generally required to investigate or limit exposure to radiation

  13. Radiation and waste safety

    International Nuclear Information System (INIS)

    1997-01-01

    Most of the ionizing radiation that people are exposed to in day-to-day activities comes from natural, rather than manmade, sources. Nuclear radiation is a powerful source of benefit to mankind, whether applied in the field of medicine, agriculture, environmental management or elsewhere. The health effects of radiation - both natural and artificial - are relatively well understood and can be minimized through careful safety measures and practices. The Department of Technical Co-operation is sponsoring a programme with the support of the Nuclear Safety Department aiming at establishing Basic Safety Standard requirements in all Member States. (IAEA)

  14. SU-D-201-07: A Survey of Radiation Oncology Residents’ Training and Preparedness to Lead Patient Safety Programs in Clinics

    International Nuclear Information System (INIS)

    Spraker, M; Nyflot, M; Ford, E; Kane, G; Zeng, J; Hendrickson, K

    2016-01-01

    Purpose: Safety and quality has garnered increased attention in radiation oncology, and physicians and physicists are ideal leaders of clinical patient safety programs. However, it is not clear whether residency programs incorporate formal patient safety training and adequately equip residents to assume this leadership role. A national survey was conducted to evaluate medical and physics residents’ exposure to safety topics and their confidence with the skills required to lead clinical safety programs. Methods: Radiation oncology residents were identified in collaboration with ARRO and AAPM. The survey was released in February 2016 via email using REDCap. This included questions about exposure to safety topics, confidence leading safety programs, and interest in training opportunities (i.e. workshops). Residents rated their exposure, skills, and confidence on 4 or 5-point scales. Medical and physics residents responses were compared using chi-square tests. Results: Responses were collected from 56 of 248 (22%) physics and 139 of 690 (20%) medical residents. More than two thirds of all residents had no or only informal exposure to incident learning systems (ILS), root cause analysis (RCA), failure mode and effects analysis (FMEA), and the concept of human factors engineering (HFE). Likewise, 63% of residents had not heard of RO-ILS. Response distributions were similar, however more physics residents had formal exposure to FMEA (p<0.0001) and felt they were adequately trained to lead FMEAs in clinic (p<0.001) than medical residents. Only 36% of residents felt their patient safety training was adequate, and 58% felt more training would benefit their education. Conclusion: These results demonstrate that, despite increasing desire for patient safety training, medical and physics residents’ exposure to relevant concepts is low. Physics residents had more exposure to FMEA than medical residents, and were more confident in leading FMEA. This suggests that increasing

  15. SU-D-201-07: A Survey of Radiation Oncology Residents’ Training and Preparedness to Lead Patient Safety Programs in Clinics

    Energy Technology Data Exchange (ETDEWEB)

    Spraker, M; Nyflot, M; Ford, E; Kane, G; Zeng, J; Hendrickson, K [University of Washington, Seattle, WA (United States)

    2016-06-15

    Purpose: Safety and quality has garnered increased attention in radiation oncology, and physicians and physicists are ideal leaders of clinical patient safety programs. However, it is not clear whether residency programs incorporate formal patient safety training and adequately equip residents to assume this leadership role. A national survey was conducted to evaluate medical and physics residents’ exposure to safety topics and their confidence with the skills required to lead clinical safety programs. Methods: Radiation oncology residents were identified in collaboration with ARRO and AAPM. The survey was released in February 2016 via email using REDCap. This included questions about exposure to safety topics, confidence leading safety programs, and interest in training opportunities (i.e. workshops). Residents rated their exposure, skills, and confidence on 4 or 5-point scales. Medical and physics residents responses were compared using chi-square tests. Results: Responses were collected from 56 of 248 (22%) physics and 139 of 690 (20%) medical residents. More than two thirds of all residents had no or only informal exposure to incident learning systems (ILS), root cause analysis (RCA), failure mode and effects analysis (FMEA), and the concept of human factors engineering (HFE). Likewise, 63% of residents had not heard of RO-ILS. Response distributions were similar, however more physics residents had formal exposure to FMEA (p<0.0001) and felt they were adequately trained to lead FMEAs in clinic (p<0.001) than medical residents. Only 36% of residents felt their patient safety training was adequate, and 58% felt more training would benefit their education. Conclusion: These results demonstrate that, despite increasing desire for patient safety training, medical and physics residents’ exposure to relevant concepts is low. Physics residents had more exposure to FMEA than medical residents, and were more confident in leading FMEA. This suggests that increasing

  16. RF radiation safety handbook

    International Nuclear Information System (INIS)

    Kitchen, Ronald.

    1993-01-01

    Radio frequency radiation can be dangerous in a number of ways. Hazards include electromagnetic compatibility and interference, electro-explosive vapours and devices, and direct effects on the human body. This book is a general introduction to the sources and nature of RF radiation. It describes the ways in which our current knowledge, based on relevant safety standards, can be used to safeguard people from any harmful effects of RF radiation. The book is designed for people responsible for, or concerned with, safety. This target audience will primarily be radio engineers, but includes those skilled in other disciplines including medicine, chemistry or mechanical engineering. The book covers the problems of RF safety management, including the use of measuring instruments and methods, and a review of current safety standards. The implications for RF design engineers are also examined. (Author)

  17. Transportation safety training

    International Nuclear Information System (INIS)

    Jones, E.

    1990-01-01

    Over the past 25 years extensive federal legislation involving the handling and transport of hazardous materials/waste has been passed that has resulted in numerous overlapping regulations administered and enforced by different federal agencies. The handling and transport of hazardous materials/waste involves a significant number of workers who are subject to a varying degree of risk should an accident occur during handling or transport. Effective transportation training can help workers address these risks and mitigate them, and at the same time enable ORNL to comply with the federal regulations concerning the transport of hazardous materials/waste. This presentation will outline how the Environmental and Health Protection Division's Technical Resources and Training Section at the Oak Ridge National Laboratory, working with transportation and waste disposal personnel, have developed and implemented a comprehensive transportation safety training program to meet the needs of our workers while satisfying appropriate federal regulations. 8 refs., 3 tabs

  18. Education and Training in Radiation, Transport and Waste Safety Newsletter, No. 05, March 2016

    International Nuclear Information System (INIS)

    2016-03-01

    Since 2005, IAEA has provided technical support for the Education and Training Appraisal (EduTA) missions. The EduTA team typically comprises one IAEA staff member and two international experts. So far, 20 missions have been completed (including follow-up and preparatory missions) and three missions are planned in 2016. To describe EduTA benefits, the expectations and impacts, both National and Regional perspectives of the Member States receiving and who are about to receive EduTA missions are the focus of this newsletter

  19. Radiation safety and control

    International Nuclear Information System (INIS)

    Kim, Jang Hee; Kim, Gi Sub.

    1996-12-01

    The principal objective of radiological safety control is intended for achievement and maintenance of appropriately safe condition in environmental control for activities involving exposure from the use of radiation. In order to establish these objective, we should be to prevent deterministic effects and to limit the occurrence stochastic effects to level deemed to be acceptable by the application of general principles of radiation protection and systems of dose limitation based on ICRP recommendations. (author). 22 tabs., 13 figs., 11 refs

  20. Training Programs on Radiological Safety for users of Ionizing Radiations in Peru; Programas de formacion en proteccion radiologica para usuarios de radiaciones ionizantes en el Peru

    Energy Technology Data Exchange (ETDEWEB)

    Medina Gironzini, E.

    2003-07-01

    In Peru, people who work with ionizing radiations must have an authorization (Individual License) as established in the Radiological Safety Regulations, which are the mandatory rules. The Technical Office of the National Authority (OTAN), which is the technical organ of the Peruvian Institute of Nuclear Energy (IPEN) in charge of controlling radiations within the country, grants the authorization after the candidate demonstrates that he/she knows the specific use of the technique using radiations, as well as the aspects related to safety and radiological protection. Since it was created in 1972, the Superior Center of Nuclear Studies (VSEN) from IPEN has carried out different training courses so that people can work safety with ionizing radiations in medicine, industry and investigation. The analysis of the radiological safety programs carried out by CSEN during the last 30 years, which allowed the training of more than 2200 people in the country and, at the same time, made possible the securing of the respective Individual License, is presented in this work. The courses, nuclear medicine, radiotherapy, industrial radiography, nuclear gauges gamma irradiator, etc..., are part of the continuous education program of CSEN. (Author)

  1. Strategies of training as a part of radiation protection and nuclear safety in the 21st century

    International Nuclear Information System (INIS)

    Tafuni, O.

    2009-01-01

    Elaboration of national strategies and national training system is one of the main direction in the field of radio protection and nuclear safety in the Republic of Moldova. Necessary seminars and advanced training courses are held in the country and abroad, as well as the educational and informational materials are published to obtain these objectives. Scientific personnel of high educational institutions and specialists in the field of nuclear safety take part in accomplishment of the strategy. The demands of International and European organizations in this field are taken into consideration

  2. Radiation safety standards

    International Nuclear Information System (INIS)

    1975-01-01

    This is a basic document with which all rules and regulations, etc., concerning protection from ionizing radiations of workers and the general population have to conform. Basic concepts, dimensions, units, and terms used in the area of radiation safety are defined. Radiation exposures are sorted out into three categories: A, to personnel; B, to individual members of the popul;tion; and C, to the general population. Critical organs, furthermore, comprise four groups, the first of them being applicable to the whole-body gonads and bone marrow. Category A maximum permissible dose (MPD) to first group critical organs is 5 rem/year; to second group, 15 rem/year; to thrid group, 3O rem/year; and to fourth group, 75 rem/year. These rate figures include doses from both external and internal radiation exposure. Quality factors needed in computing doses from various types of radiation are provided. Permissible planned exposure levels are specified and guidelines given for accidental exposures. A radiation accident is considered to have occurred if the relevant critical organ dose is 5 times the annual MPD for that organ. For individual members of the population (category B), annual somatic doses to first group critical organs shall not exceed 0,5 rem. Population exposure is controlled in terms of genetically significant dose, which shall not exceed 5 rem/30 years. (G.G.)

  3. Nuclear safety training program (NSTP) for dismantling

    International Nuclear Information System (INIS)

    Cretskens, Pieter; Lenie, Koen; Mulier, Guido

    2014-01-01

    European Control Services (GDF Suez) has developed and is still developing specific training programs for the dismantling and decontamination of nuclear installations. The main topic in these programs is nuclear safety culture. We therefore do not focus on technical training but on developing the right human behavior to work in a 'safety culture' environment. The vision and techniques behind these programs have already been tested in different environments: for example the dismantling of the BN MOX Plant in Dessel (Belgium), Nuclear Safety Culture Training for Electrabel NPP Doel..., but also in the non-nuclear industry. The expertise to do so was found in combining the know-how of the Training and the Nuclear Department of ECS. In training, ECS is one of the main providers of education in risky tasks, like elevation and manipulation of charges, working in confined spaces... but it does also develop training on demand to improve safety in a certain topic. Radiation Protection is the core business in the Nuclear Department with a presence on most of the nuclear sites in Belgium. Combining these two domains in a nuclear safety training program, NSTP, is an important stage in a dismantling project due to specific contamination, technical and other risks. It increases the level of safety and leads to a harmonization of different working cultures. The modular training program makes it possible to evaluate constantly as well as in group or individually. (authors)

  4. CEC radiation protection research and training program

    International Nuclear Information System (INIS)

    Gerber, G.B.

    1991-01-01

    The Radiation Protection Program (RPP), initiated as a consequence of the Euratom Treaty aims to promote: scientific knowledge to evaluate possible risks from low doses of natural, medical and man-made radiation; development of methods to assess radiological risks; incentive and support for cooperation between scientists of Member States; expertise in radiation protection by training scientists and the scientific basis for continual updating of the 'Basic Safety Standards', and the evolution of radiation protection concepts and practices. 3 refs

  5. New general radiation protection training course

    CERN Document Server

    2008-01-01

    Some members of CERN personnel, users included, may have to work in supervised or controlled radiation areas, or may be concerned with activities involving the use of radioactive sources. According to CERN Safety rules all persons whose work may encounter ionising radiation risk must be adequately trained. This training must ensure that workers are informed about the potential health risks which could result from radiation exposure, about the basic principles of radiation protection and of the relevant radiation protection regulations as well as about safe working methods and techniques in radiation zones. Therefore the Organization organises mandatory general and work-specific radiation protection (RP) courses addressed to its personnel. These courses are also open to contractors’ personnel, in addition to the RP training they must receive from their employers. Based on the results of a pilot project, an improved general radiation protection course has been prepared. This...

  6. New general radiation protection training course

    CERN Multimedia

    2008-01-01

    Some members of CERN personnel, including users, may have to work in supervised or controlled radiation areas, or may be involved in activities involving the use of radioactive sources. According to CERN Safety Rules all persons whose work may be associated with ionising radiation risk must be adequately trained. This training must ensure that workers are informed about the potential health risks which could result from radiation exposure, the basic principles of radiation protection and the relevant radiation protection regulations as well as safe working methods and techniques in radiation zones. Therefore the Organization organises mandatory general and work-specific radiation protection (RP) courses for its personnel. These courses are also open to contractors’ personnel, in addition to the RP training they must receive from their employers. Based on the results of a pilot project, an improved general radiation protection course has been prepared. This new ½ day cours...

  7. Implementation of radiation safety program in a medical institution

    International Nuclear Information System (INIS)

    Palanca, Elena D.

    1999-01-01

    A medical institution that utilizes radiation for the diagnosis and treatment of diseases of malignancies develops and implements a radiation safety program to keep occupational exposures of radiation workers and exposures of non-radiation workers and the public to the achievable and a more achievable minimum, to optimize the use of radiation, and to prevent misadministration. The hospital radiation safety program is established by a core medical radiation committee composed of trained radiation safety officers and head of authorized users of radioactive materials and radiation machines from the different departments. The radiation safety program sets up procedural guidelines of the safe use of radioactive material and of radiation equipment. It offers regular training to radiation workers and radiation safety awareness courses to hospital staff. The program has a comprehensive radiation safety information system or radsis that circularizes the radiation safety program in the hospital. The radsis keeps the drafted and updated records of safety guides and policies, radioactive material and equipment inventory, personnel dosimetry reports, administrative, regulatory and licensing activity document, laboratory procedures, emergency procedures, quality assurance and quality control program process, physics and dosimetry procedures and reports, personnel and hospital staff training program. The medical radiation protection committee is tasked to oversee the actual implementation of the radiation safety guidelines in the different radiation facilities in the hospital, to review personnel exposures, incident reports and ALARA actions, operating procedures, facility inspections and audit reports, to evaluate the existing radiation safety procedures, to make necessary changes to these procedures, and make modifications of course content of the training program. The effective implementation of the radiation safety program provides increased confidence that the physician and

  8. Effective education in radiation safety for nurses

    International Nuclear Information System (INIS)

    Ohno, K.; Kaori, T.

    2011-01-01

    In order to establish an efficient training program of radiation safety for nurses, studies have been carried out on the basis of questionnaires. Collaboration of nurses, who are usually standing closest to the patient, is necessary in order to offer safe radiological diagnostics/treatment. The authors distributed the questionnaire to 134 nurses in five polyclinic hospitals in Japan. Important questions were: fear of radiation exposure, knowledge on the radiation treatment, understanding the impact on pregnancy, and so on. Most of the nurses feel themselves uneasy against exposure to radiation. They do not have enough knowledge of radiological treatment. They do not know exactly what is the impact of the radiation on pregnant women. Such tendency is more pronounced, when nurses spend less time working in the radiological department. Nurses play important roles in radiological diagnostics/treatment. Therefore, a well-developed education system for radiation safety is essential. The training for the radiation safety in medicine should be done in the context of general safety in medicine. Education programs in undergraduate school and at the working place should be coordinated efficiently in order to ensure that both nurses and patients are informed about the meaning of radiation safety. (authors)

  9. Radiation protection and safety infrastructures in Albania

    International Nuclear Information System (INIS)

    Paci, Rustem; Ylli, Fatos

    2008-01-01

    The paper intends to present the evolution and actual situation of radiation protection and safety infrastructure in Albania, focusing in its establishing and functioning in accordance with BBS and other important documents of specialized international organizations. There are described the legal framework of radiation safety, the regulatory authority, the services as well the practice of their functioning. The issue of the establishing and functioning of the radiation safety infrastructure in Albania was considered as a prerequisite for a good practices development in the peaceful uses of radiation sources . The existence of the adequate legislation and the regulatory authority, functioning based in the Basic Safety Standards (BSS), are the necessary condition providing the fulfilment of the most important issues in the mentioned field. The first document on radiation protection in Albania stated that 'for the safe use of radiation sources it is mandatory that the legal person should have a valid permission issued by Radiation Protection Commission'. A special organ was established in the Ministry of Health to supervise providing of the radiation protection measures. This organization of radiation protection showed many lacks as result of the low efficiency . The personnel monitoring, import, transport, waste management and training of workers were in charge of Institute of Nuclear Physics (INP). In 1992 an IAEA RAPAT mission visited Albania and proposed some recommendations for radiation protection improvements. The mission concluded that 'the legislation of the radiation protection should be developed'. In 1995 Albania was involved in the IAEA Model Project 'Upgrading of Radiation Protection Infrastructure'. This project, which is still in course, intended to establish the modern radiation safety infrastructures in the countries with low efficiency ones and to update and upgrade all aspects related with radiation safety: legislation and regulations, regulatory

  10. Radiation protection training programmes Spanish approach

    International Nuclear Information System (INIS)

    Arboli, M. Marco; Suarez, M. Rodriguez; Cabrera, S. Falcon

    2002-01-01

    Radiation Protection Programmes are being considered the best way to promote safety culture and to spread and propagate European basic safety standards. It is widely accepted that training is an important tool to upgrade competence for radiation exposed workers. The Spanish Radiation Protection Education and Training Programmes provide a solid and integrated educational model, which takes into account the variety of applied fields, the different levels of responsibilities, the technological and methodological advances, as well as the international tendencies. The needs for a specialised training on Radiation Protection (RP) for exposed workers appears into the Spanish regulation in 1964. National initial training programmes are well established since 1972. Individual certifications, based on personal licences are required for exposed workers. The Spanish regulation also includes continuous and on the job RP training. The educational programmes are being continuously updating and improving. CIEMAT plays an important role in RP Spanish training, improving and modifying the previous RP courses and developing new programmes in order to complete the RP training levels. To achieve Radiation Protection objectives, new technological media for educational methods and material are taking into account. Nevertheless, Spanish RP education and training model has to be improved in some aspects. The purpose of this paper is to analyse the situation and the future needs to be considered in order to complete the RP training processes

  11. Occupational radiation protection. Safety guide

    International Nuclear Information System (INIS)

    2002-01-01

    Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. In 1996, the Agency published Safety Fundamentals on Radiation Protection and the Safety of Radiation Sources (IAEA Safety Series No. 120) and International Basic Safety Standards for Protection against Ionizing, Radiation and for the Safety of Radiation Sources (IAEA Safety Series No. 115), both of which were jointly sponsored by the Food and Agriculture Organization of the United Nations, the IAEA, the International Labour Organisation, the OECD Nuclear Energy Agency, the Pan American Health Organization and the World Health Organization. These publications set out, respectively, the objectives and principles for radiation safety and the requirements to be met to apply the principles and to achieve the objectives. The establishment of safety requirements and guidance on occupational radiation protection is a major component of the support for radiation safety provided by the IAEA to its Member States. The objective of the IAEA's occupational protection programme is to promote an internationally harmonized approach to the optimization of occupational radiation protection, through the development and application of guidelines for restricting radiation exposures and applying current radiation protection techniques in the workplace. Guidance on meeting the requirements of the Basic Safety Standards for occupational protection is provided in three interrelated Safety Guides, one giving general guidance on the development of occupational radiation protection programmes and two giving more detailed guidance on the monitoring and assessment of workers' exposure due to external radiation sources and from intakes of radionuclides, respectively. These Safety

  12. Occupational radiation protection. Safety guide

    International Nuclear Information System (INIS)

    2006-01-01

    Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. In 1996, the Agency published Safety Fundamentals on Radiation Protection and the Safety of Radiation Sources (IAEA Safety Series No. 120) and International Basic Safety Standards for Protection against Ionizing, Radiation and for the Safety of Radiation Sources (IAEA Safety Series No. 115), both of which were jointly sponsored by the Food and Agriculture Organization of the United Nations, the IAEA, the International Labour Organisation, the OECD Nuclear Energy Agency, the Pan American Health Organization and the World Health Organization. These publications set out, respectively, the objectives and principles for radiation safety and the requirements to be met to apply the principles and to achieve the objectives. The establishment of safety requirements and guidance on occupational radiation protection is a major component of the support for radiation safety provided by the IAEA to its Member States. The objective of the IAEA's occupational protection programme is to promote an internationally harmonized approach to the optimization of occupational radiation protection, through the development and application of guidelines for restricting radiation exposures and applying current radiation protection techniques in the workplace. Guidance on meeting the requirements of the Basic Safety Standards for occupational protection is provided in three interrelated Safety Guides, one giving general guidance on the development of occupational radiation protection programmes and two giving more detailed guidance on the monitoring and assessment of workers' exposure due to external radiation sources and from intakes of radionuclides, respectively. These Safety

  13. Occupational radiation protection. Safety guide

    International Nuclear Information System (INIS)

    1999-01-01

    Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. In 1996, the Agency published Safety Fundamentals on Radiation Protection and the Safety of Radiation Sources (IAEA Safety Series No. 120) and International Basic Safety Standards for Protection against Ionizing, Radiation and for the Safety of Radiation Sources (IAEA Safety Series No. 115), both of which were jointly sponsored by the Food and Agriculture Organization of the United Nations, the IAEA, the International Labour Organisation, the OECD Nuclear Energy Agency, the Pan American Health Organization and the World Health Organization. These publications set out, respectively, the objectives and principles for radiation safety and the requirements to be met to apply the principles and to achieve the objectives. The establishment of safety requirements and guidance on occupational radiation protection is a major component of the support for radiation safety provided by the IAEA to its Member States. The objective of the IAEA's occupational protection programme is to promote an internationally harmonized approach to the optimization of occupational radiation protection, through the development and application of guidelines for restricting radiation exposures and applying current radiation protection techniques in the workplace. Guidance on meeting the requirements of the Basic Safety Standards for occupational protection is provided in three interrelated Safety Guides, one giving general guidance on the development of occupational radiation protection programmes and two giving more detailed guidance on the monitoring and assessment of workers' exposure due to external radiation sources and from intakes of radionuclides, respectively. These Safety

  14. Occupational radiation protection. Safety guide

    International Nuclear Information System (INIS)

    2004-01-01

    Occupational exposure to ionizing radiation can occur in a range of industries, medical institutions, educational and research establishments and nuclear fuel cycle facilities. Adequate radiation protection of workers is essential for the safe and acceptable use of radiation, radioactive materials and nuclear energy. In 1996, the Agency published Safety Fundamentals on Radiation Protection and the Safety of Radiation Sources (IAEA Safety Series No. 120) and International Basic Safety Standards for Protection against Ionizing, Radiation and for the Safety of Radiation Sources (IAEA Safety Series No. 115), both of which were jointly sponsored by the Food and Agriculture Organization of the United Nations, the IAEA, the International Labour Organisation, the OECD Nuclear Energy Agency, the Pan American Health Organization and the World Health Organization. These publications set out, respectively, the objectives and principles for radiation safety and the requirements to be met to apply the principles and to achieve the objectives. The establishment of safety requirements and guidance on occupational radiation protection is a major component of the support for radiation safety provided by the IAEA to its Member States. The objective of the IAEA's occupational protection programme is to promote an internationally harmonized approach to the optimization of occupational radiation protection, through the development and application of guidelines for restricting radiation exposures and applying current radiation protection techniques in the workplace. Guidance on meeting the requirements of the Basic Safety Standards for occupational protection is provided in three interrelated Safety Guides, one giving general guidance on the development of occupational radiation protection programmes and two giving more detailed guidance on the monitoring and assessment of workers' exposure due to external radiation sources and from intakes of radionuclides, respectively. These Safety

  15. Radiation Safety (Qualifications) Regulations 1980

    International Nuclear Information System (INIS)

    1980-01-01

    These Regulations, promulgated pursuant to the provisions of the Radiation Safety Act, 1975-1979, require persons engaged in activities involving radiation to pass a radiation safety examination or to possess an approved qualification in radiation. The National Health and Medical Research Council is authorised to exempt persons from compliance with these requirements or, conversely, to impose such requirements on persons other than those designated. (NEA) [fr

  16. Radiation Safety for Sustainable Development

    International Nuclear Information System (INIS)

    2015-10-01

    The objective of radiation safety is Assessments of Natural Radioactivity and its Radiological. The following topics were discussed during the conference: AFROSAFE Championing Radiation Safety in Africa, Radiation Calibration, and Development and Validation of a Laser Induced Breakdown Spectrometry Method for Cancer Detection and Characterization. Young Generation in NUCLEAR Initiative to Promote Nuclear Science and Technology, Radiation Protection Safety Culture and Application of Nuclear Techniques in Industry and the Environment were discuss. Rapid Chemometric X-Ray Fluorescence approaches for spectral Diagnostics of Cancer utilizing Tissue Trace Metals and Speciation profiles. Fundamental role of medical physics in Radiation Therapy

  17. The value of exchange visits of stakeholders in the education and training processes in the area of radiation protection and safety culture

    International Nuclear Information System (INIS)

    Duranova, T.; Bohunova, J.

    2014-01-01

    Exchange visits offer a bundle of benefits, well beyond just acquiring information. The value of exchange visits of stakeholders in the education and training processes in the area of radiation protection and safety culture is demonstrated on the activities performed within the EC projects NERIS-TP and PREPARE under the umbrella of the European NERIS Platform. The technical visits to the affected regions of Belarus close to Chernobyl NPP as well as Fukushima Mission 2013 on the FAIRDO and ISAP 2013 in Japan illustrate well the methods of wide range of stakeholders engagement and involvement in the area of radiation control and practical radiological culture and their benefit in the education and training process. These visits have created common understanding, relationships forged in the hardships of shared experience, commitments to new approaches, and friendships as foundation for future networking. Technical visits allowed Slovak stakeholders and Belorussian hosts to focus time and attention on a topic, learning deeply, sharing ideas, and assessing the relevance of new approaches in the area of the post-accident management and rehabilitation with the main goal of improvement both national and local plans for preparedness and recovery. The technical or study visits for education and training purpose are valuable in the process of enhancement of the radiation protection and safely culture. (authors)

  18. The value of exchange visits of stakeholders in the education and training process in the area of radiation protection and safety culture

    International Nuclear Information System (INIS)

    Duranova, T.; Bohunova, J.

    2014-01-01

    Exchange visits offer a bundle of benefits, well beyond just acquiring information. The value of exchange visits of stakeholders in the education and training processes in the area of radiation protection and safety culture is demonstrated on the activities performed within the EC projects NERIS-TP and PREPARE under the umbrella of the European NERIS Platform. The technical visits to the affected regions of Belarus close to Chernobyl NPP as well as Fukushima Mission 2013 on the FAIRDO and ISAP 2013 in Japan illustrate well the methods of wide range of stakeholders engagement and involvement in the area of radiation control and practical radiological culture and their benefit in the education and training process. These visits have created common understanding, relationships forged in the hardships of shared experience, commitments to new approaches, and friendships as foundation for future networking. Technical visits allowed Slovak stakeholders and Belorussian hosts to focus time and attention on a topic, learning deeply, sharing ideas, and assessing the relevance of new approaches in the area of the post-accident management and rehabilitation with the main goal of improvement both national and local plans for preparedness and recovery. The technical or study visits for education and training purpose are valuable in the process of enhancement of the radiation protection and safely culture. (authors)

  19. All aboard the Safety Train(ing)!

    CERN Multimedia

    Rosaria Marraffino

    2015-01-01

    Would you like to influence CERN’s safety courses? Do you want to help build better training courses? If your answer is yes to one or both of these questions: now is the time! The Safety Training section is looking for volunteers from the whole CERN community to test new courses before they go online for all members of the personnel.    The Safety Training section is redesigning the CERN e-learning package in order to adopt a more educational approach and to make the courses a more enjoyable experience. The section is now calling for volunteers. “We know we can do much more with testers’ help and feedback,” explains Christoph Balle, Safety Training section leader. “By having the end users actively involved in the process, we’ll achieve our goal of communicating safety in the best possible way. As the volunteers will play an active role in the development of the courses, they will be providing a service to the whole community.&am...

  20. Effective safety training program design

    International Nuclear Information System (INIS)

    Chilton, D.A.; Lombardo, G.J.; Pater, R.F.

    1991-01-01

    Changes in the oil industry require new strategies to reduce costs and retain valuable employees. Training is a potentially powerful tool for changing the culture of an organization, resulting in improved safety awareness, lower-risk behaviors and ultimately, statistical improvements. Too often, safety training falters, especially when applied to pervasive, long-standing problems. Stepping, Handling and Lifting injuries (SHL) more commonly known as back injuries and slips, trips and falls have plagued mankind throughout the ages. They are also a major problem throughout the petroleum industry. Although not as widely publicized as other immediately-fatal accidents, injuries from stepping, materials handling, and lifting are among the leading causes of employee suffering, lost time and diminished productivity throughout the industry. Traditional approaches have not turned the tide of these widespread injuries. a systematic safety training program, developed by Anadrill Schlumberger with the input of new training technology, has the potential to simultaneously reduce costs, preserve employee safety, and increase morale. This paper: reviews the components of an example safety training program, and illustrates how a systematic approach to safety training can make a positive impact on Stepping, Handling and Lifting injuries

  1. Radiation Safety in Industrial Radiography. Specific Safety Guide (Spanish Edition)

    International Nuclear Information System (INIS)

    2013-01-01

    This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography

  2. Radiation Safety in Industrial Radiography. Specific Safety Guide

    International Nuclear Information System (INIS)

    2011-01-01

    This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography.

  3. Radiation Safety in Industrial Radiography. Specific Safety Guide (French Edition)

    International Nuclear Information System (INIS)

    2013-01-01

    This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in … shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography

  4. Radiation Safety in Industrial Radiography. Specific Safety Guide (Arabic Edition)

    International Nuclear Information System (INIS)

    2012-01-01

    This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in shielded facilities that have effective engineering controls and outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography.

  5. Radiation Safety Aspects of Nanotechnology

    Energy Technology Data Exchange (ETDEWEB)

    Hoover, Mark [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Myers, David; Cash, Leigh Jackson [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Guilmette, Raymond [Ray Guilmette & Associates, LLC, Perry, ME (United States); Kreyling, Wolfgang [Helmholtz-Zentrum Munchen, (Germany); Oberdorster, Gunter [Univ. of Rochester, NY (United States); Smith, Rachel [Public Health England, Oxfordshire (United Kingdom). Centre for Radiation, Chemical and Environmental Hazards

    2017-03-27

    This Report is intended primarily for operational health physicists, radiation safety officers, and internal dosimetrists who are responsible for establishing and implementing radiation safety programs involving radioactive nanomaterials. It should also provide useful information for workers, managers and regulators who are either working directly with or have other responsibilities related to work with radioactive nanomaterials.

  6. Nuclear and radiation safety policy

    International Nuclear Information System (INIS)

    Mikus, T; Strycek, E.

    1998-01-01

    Slovenske elektrarne (SE) is a producer of electricity and heat, including from nuclear fuel source. The board of SE is ultimately responsible for nuclear and radiation safety matters. In this leaflet main principles of maintaining nuclear and radiation safety of the Company SE are explained

  7. Radiation safety in Australia's mineral sands industry

    International Nuclear Information System (INIS)

    Hughes, W.

    1989-06-01

    This brochure is part of a training package aiming to explain in simple terms what radiation is, how it affects people's lives and how, in the specific case of the mineral sand industry, the risk of ill-effects from low-level radioactivity could be effectively guarded against by simple and easily followed safety precautions. ills

  8. Occupational radiation safety in mining

    International Nuclear Information System (INIS)

    Stocker, H.

    1985-01-01

    The first International Conference on Occupational Radiation Safety in Mining was held three years ago in Golden, Colorado, U.S.A., and it provided an excellent forum for an exchange of information on the many scientific, technical and operational aspects of radiation safety in mining. I am aware of the broad spectrum of epidemiological, engineering and related studies which have been pursued during the past three years with a view to achieving further improvements in radiation protection and I expect that the information on these studies will contribute significantly to a wider understanding of subject, and in particular, the means by which radiation safety measures in mining can be optimized

  9. Occupational safety meets radiation protection

    International Nuclear Information System (INIS)

    Severitt, S.; Oehm, J.; Sobetzko, T.; Kloth, M.

    2012-01-01

    The cooperation circle ''Synergies in operational Security'' is a joint working group of the Association of German Safety Engineers (VDSI) and the German-Swiss Professional Association for Radiation Protection (FS). The tasks of the KKSyS are arising from the written agreement of the two associations. This includes work on technical issues. In this regard, the KKSyS currently is dealing with the description of the interface Occupational Safety / Radiation Protection. ''Ignorance is no defense'' - the KKSyS creates a brochure with the working title ''Occupational Safety meets radiation protection - practical guides for assessing the hazards of ionizing radiation.'' The target groups are entrepreneurs and by them instructed persons to carry out the hazard assessment. Our aim is to create practical guides, simple to understand. The practical guides should assist those, who have to decide, whether an existing hazard potential through ionizing radiation requires special radiation protection measures or whether the usual measures of occupational safety are sufficient. (orig.)

  10. Radiation safety and gynaecological brachytherapy

    International Nuclear Information System (INIS)

    Crawford, L.

    1985-01-01

    In 1983, the Radiation Control Section of the South Australian Health Commission conducted an investigation into radiation safety practices in gynaecological brachytherapy. Part of the investigation included a study of the transportation of radioactive sources between hospitals. Several deficiences in radiation safety were found in the way these sources were being transported. New transport regulations came into force in South Australia in July 1984 and since then there have been many changes in the transportation procedure

  11. Laser safety tools and training

    CERN Document Server

    Barat, Ken

    2008-01-01

    Lasers perform many unique functions in a plethora of applications, but there are many inherent risks with this continually burgeoning technology. Laser Safety: Tools and Training presents simple, effective ways for users in a variety of facilities to evaluate the hazards of any laser procedure and ensure they are following documented laser safety standards.Designed for use as either a stand-alone volume or a supplement to Laser Safety Management, this text includes fundamental laser and laser safety information and critical laser use information rarely found in a single source. The first lase

  12. Radiation safety: New international standards

    International Nuclear Information System (INIS)

    Gonzalez, A.J.

    1994-01-01

    This article highlights an important result of this work for the international harmonization of radiation safety: specifically, it present an overview of the forthcoming International Basic Safety Standards for Protection Against Ionizing Radiation and for the Safety of Radiation Sources - the so-called BSS. They have been jointly developed by six organizations - the Food and Agriculture Organization of the United Nations (FAO), the International Atomic Energy Agency (IAEA), the International Labour Organization (ILO), the Nuclear Energy Agency of the Organization for Economic Co-operation and Development (NEA/OECD), the Pan American Health Organization (PAHO), and the World Health Organization (WHO)

  13. Safety Training: Basic Safety and Access Courses

    CERN Multimedia

    Antonella Vignes

    2005-01-01

    Objective The purpose of the basic safety courses is to increase awareness for everyone working on the CERN site (CERN staff, associates, outside companies, students and apprentices) of the various existing on-site hazards, and how to recognize and avoid them. Safety course changes The current organization for basic safety courses is changing. There will be two main modifications: the organization of the courses and the implementation of a specific new training course for the LHC machine during the LHC tests and hardware commissioning phase. Organizational changes This concerns the existing basic safety training, currently called level1, level2 and level3. Under the new procedure, a video will be projected in registration building 55 and will run every day at 14.00 and 15.00 in English. The duration of the video will be 50 minutes. The course contents will be the same as the slides currently used, plus a video showing real situations. With this new organization, attendees will systematically follow the...

  14. Safety Training: basic safety and access courses

    CERN Multimedia

    2005-01-01

    Objective The purpose of the basic safety courses is to increase awareness for everyone working on the CERN site (CERN staff, associates, outside companies, students and apprentices) of the various hazards existing on site, and how to recognise and avoid them. Safety course changes The current organisation of basic safety courses is changing. There will be two main modifications: the organisation of the courses and the implementation of a specific new training course for the LHC machine during the LHC tests and hardware commissioning phase. Organisational changes This concerns the existing basic safety training, currently called level 1, level 2 and level 3. Under the new procedure, a video will be projected in registration building 55 and will run every day at 14.00 and 15.00 in English. The duration of the video will be 50 minutes. The course contents will be the same as the slides currently used, plus a video showing real situations. With this new organization, participants will systematically follow...

  15. Radiation safety standards and regulations

    International Nuclear Information System (INIS)

    Ermolina, E.P.; Ivanov, S.I.

    1993-01-01

    Radiation protection laws of Russia concerning medical application of ionizing radiation are considered. Main concepts of the documents and recommendations are presented. Attention was paid to the ALARA principle, safety standrds for paietients, personnel and population, radiation protection. Specific feature of the standardization of radiation factors is the establishment of two classes of norms: main dose limits and permissible levels. Maximum dose commitment is the main standard. Three groups of critical organs and three categories of the persons exposed to radiation are stated. Main requirements for radiation protection are shown

  16. Radiation safety aspects at Indus accelerator complex

    International Nuclear Information System (INIS)

    Marathe, R.G.

    2011-01-01

    Indus Accelerator Complex at Raja Ramanna Center for Advanced Technology houses two synchrotron radiation sources Indus-1 and Indus-2 that are being operated round-the-clock to cater to the needs of the research community. Indus-1 is a 450 MeV electron storage ring and Indus-2 is presently being operated with electrons stored at 2 GeV. Bremsstrahlung radiation and photo-neutrons form the major radiation environment in Indus Accelerator Complex. They are produced due to loss of electron-beam occurring at different stages of operation of various accelerators located in the complex. The synchrotron radiation (SR) also contributes as a potential hazard. In order to ensure safety of synchrotron radiation users and operation and maintenance staff working in the complex from this radiation, an elaborate radiation safety system is in place. The system comprises a Personnel Protection System (PPS) and a Radiation Monitoring System (RMS). The PPS includes zoning, radiation shielding, door interlocks, a search and scram system and machine operation trip-interlocks. The RMS consists of area radiation monitors and beam loss monitors, whose data is available online in the Indus control room. Historical data of radiation levels is also available for data analysis. Synchrotron radiation beamlines at Indus-2 are handled in a special manner owing to the possibility of exposure to synchrotron radiation. Shielding hutches with SR monitors are installed at each beamline of Indus-2. Health Physics Unit also carries out regular radiological surveillance for photons and neutrons during various modes of operation and data is logged shift wise. The operation staff is appropriately trained and qualified as per the recommendations of Atomic Energy Regulatory Board (AERB). Safety training is also imparted to the beamline users. Safe operation procedures and operation checklists are being followed strictly. A radiation instrument calibration facility is also being set-up at RRCAT. The radiation

  17. Radiation protection training for users of ionizing radiation in Hungary

    International Nuclear Information System (INIS)

    Pellet, S.; Giczi, F.; Elek, R.; Temesi, A.; Csizmadia, H.; Sera, E.

    2012-01-01

    According to the current and previous regulation related to the safety use of ionizing radiation, the personnel involved must obtain special qualification in radiation protection. In Hungary the radiation protection training are performed by appropriately certified training centers on basic, advanced and comprehensive levels. Certification of the training centers is given by the competent radiological health/radiation protection authority. The office of the Chief Medical Officer is the certifying authority for advanced and comprehensive levels training, as well as competent Regional Radiological Health Authority is responsible for basic level courses. The content and length of courses are specified in the regulation for all three levels of industrial, laboratory and medical users, in general. Some of the universities, technical and medical oriented are certified for advanced training for students as gradual course. Recently in Hungary there are 47 certified training centers for advanced and comprehensive courses, where the trainers should have a five years job experience in radiation protection and successful completion of comprehensive level course in radiation protection. (authors)

  18. Radiation protection training in Switzerland

    International Nuclear Information System (INIS)

    Pfeiffer, H.J.

    1999-01-01

    An increasing number of radiation protection experts and of professionally exposed workers is temporarily or permanently working in a country other than the one where they received their radiation protection education or training. They all face the problem and the difficulties of recognition of radiation protection training programs by other countries. For this reason the German-Swiss Radiation Protection Association (Fachverband fuer Strahlenschutz; FS) made a proposal to IRPA for an action on the mutual recognition of radiation protection education in Europe. In a first step contacts were made with two other European Associations of France and UK in order to establish a joint working group. (orig.) [de

  19. The radiation safety standards programme

    International Nuclear Information System (INIS)

    Bilbao, A.A.

    2000-01-01

    In this lecture the development of radiation safety standards by the IAEA which is a statutory function of the IAEA is presented. The latest editions of the basic safety standards published by the IAEA in cooperation with ICRP, FAO, ILO, NEA/OECD, PAHO and WHO are reviewed

  20. Radiation safety - an IAEA perspective

    International Nuclear Information System (INIS)

    Persson, L.

    1993-01-01

    The activities of the IAEA relating to radiation safety cover: The preparation of International Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources - it is expected that the new Basic Safety Standards will be adopted by the sponsoring organizations in 1994. The radiological consequences of the Chernobyl accident: the thyroid cancer controversy - the hypothesis that must be tested is whether the reported increased incidence of thyroid cancer due to exposure to radioactive iodine released in the Chernobyl accident, and there are several questions that must be answered before a firm conclusion can be reached. Emergency Response Services (ERS): In March 1993, at the request of Viet Nam, which invoked the Energency Assistance Convention, a medical team organized by the IAEA went to Hanoi and assisted in arranging for an overexposed person to be transferred from Viet Nam to Paris for specialized medical treatment. In April 1993, the ERS was used to inform Member States of the consequences of an explosion at the Tomsk 7 fuel reprocessing plant in Siberia, Russia, which caused a radiation leak. Reassessing the long range transport of radioactive material through the environment: Data from the Chernobyl accident have been used for model validation in the Atmospheric Transport Model Evaluation Study (ATMES). A follow-up programme, the European Tracer Experiment (ETEX) with experimental studies of long range atmospheric movements over Europe has been established in order to increase knowledge and prediction capability. As part of the programme, a non-toxic atmospheric tracer will be released under suitable conditions in 1994. The Radiation Protection Advisory Teams Service (RAPAT): In many of the developing countries visited, the lack of an adequate infrastructure for radiation protection is the main obstacle to improved radiation protection. Strengthening radiation and nuclear safety infrastructures in successor states of the USSR: The

  1. Radiation safety research information database

    International Nuclear Information System (INIS)

    Yukawa, Masae; Miyamoto, Kiriko; Takeda, Hiroshi; Kuroda, Noriko; Yamamoto, Kazuhiko

    2004-01-01

    National Institute of Radiological Sciences in Japan began to construct Radiation Safety Research Information Database' in 2001. The research information database is of great service to evaluate the effects of radiation on people by estimating exposure dose by determining radiation and radioactive matters in the environment. The above database (DB) consists of seven DB such as Nirs Air Borne Dust Survey DB, Nirs Environmental Tritium Survey DB, Nirs Environmental Carbon Survey DB, Environmental Radiation Levels, Abe, Metabolic Database for Assessment of Internal Dose, Graphs of Predicted Monitoring Data, and Nirs nuclear installation environment water tritium survey DB. Outline of DB and each DB are explained. (S.Y.)

  2. Radiation safety without borders initiative

    International Nuclear Information System (INIS)

    Dibblee, Martha; Dickson, Howard; Krieger, Ken; Lopez, Jose; Waite, David; Weaver, Ken

    2008-01-01

    The Radiation Safety Without Borders (RSWB) initiative provides peer support to radiation safety professionals in developing countries, which bolsters the country's infrastructure and may lead the way for IRPA Associate membership. The Health Physics Society (HPS) recognizes that many nations do not possess the infrastructure to adequately control and beneficially use ionizing radiation. In a substantial number of countries, organized radiation protection programs are minimal. The RSWB initiative relies on HPS volunteers to assist their counterparts in developing countries with emerging health physics and radiation safety programs, but whose resources are limited, to provide tools that promote and support infrastructure and help these professionals help themselves. RSWB experience to date has shown that by providing refurbished instruments, promoting visits to a HPS venue, or visiting a country just to look provide valuable technical and social infrastructure experiences often missing in the developing nation's cadre of radiation safety professionals. HPS/RSWB with the assistance of the International Atomic Energy Agency (IAEA) pairs chapters with a country, with the expectation that the country's professional radiation safety personnel will form a foreign HPS chapter, and the country eventually will become an IRPA Associate. Although still in its formative stage, RSWB nonetheless has gotten valuable information in spite of the small number of missions. The RSWB initiative continues to have significant beneficial impacts, including: Improving the radiation safety infrastructure of the countries that participate; Assisting those countries without professional radiation safety societies to form one; Strengthening the humanitarian efforts of the United States; Enhancing Homeland Security efforts through improved control of radioactive material internationally. Developing countries, including those in Latin America, underwritten by IAEA, may take advantage of resources

  3. Medical radiation physics training EMERALD

    International Nuclear Information System (INIS)

    Tabakov, S.; Roberts, C.; Lamm, I.L.; Milano, F.; Lewis, C.; Smith, D.; Litchev, A.; Jonsson, B.A.; Ljungberg, M.; Strand, S.E.; Jonsson, L.; Riccardi, L.; Benini, A.; Silva, G. da; Teixeira, N.; Pascoal, A.; Noel, A.; Smith, P.; Musilek, L.; Sheahan, N.

    2001-01-01

    Training of young medical physicists is an essential part of the framework of measures for Radiological Protection of Patients. The paper describes the Medical Radiation Physics Training Scheme EMERALD, developed by an European Project Consortium. EMERALD Training covers the Physics of X-ray Diagnostic Radiology, Nuclear Medicine and Radiotherapy. Each of these 3 modules covers 4 months training period. The EMERALD training materials are 3 Workbooks with tasks and a Teachers' Guide (total volume approx 700 pages) and 3 CD-ROMs with image database. (author)

  4. Radiation Safety of Electromagnetic Waves

    International Nuclear Information System (INIS)

    Hussein, A.Z.

    2009-01-01

    The wide spread of Electromagnetic Waves (EMW) through the power lines, multimedia, communications, devices, appliances, etc., are well known. The probable health hazards associated with EMW and the radiation safety criteria are to be reviewed. However, the principles of the regulatory safety are based on radiation protection procedure, intervention to combat the relevant risk and to mitigate consequences. The oscillating electric magnetic fields (EMF) of the electromagnetic radiation (EMR) induce electrical hazards. The extremely high power EMR can cause fire hazards and explosions of pyrotechnic (Rad Haz). Biological hazards of EMF result as dielectric heat, severe burn, as well as the hazards of eyes. Shielding is among the technical protective measures against EMR hazards. Others are limitation of time of exposure and separation distance apart of the EMR source. Understanding and safe handling of the EMR sources are required to feel safety.

  5. The Radiation Safety Culture: Image Gently

    International Nuclear Information System (INIS)

    Applegate, E.K.

    2015-01-01

    Barriers to Implementing Safety include Silos of Knowledge, Time, training and Resources. Creating a Safety Culture in Healthcare include Decreased authority gradients, Checklists and audits (QA), Use of structured language (SBAR), Situation, Background, Assessment, Recommendation Team briefings and debriefings (immediate learning, team building tools), Lifelong learning (PQI). Use of Collective Learning Opportunities - QA and PQI that include Web sites: IG, WFPI, IAEA, ISR and Data Registries: ACR . The Key Principles of Radiation Protection: When do we learn them? For Occupational Workers:Time, Distance and Shielding while those of For Patients: Justification, Optimization and Dose Limits (dose reference levels)

  6. Radiation shielding and safety design

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yong Ouk; Gil, C. S.; Cho, Y. S.; Kim, D. H.; Kim, H. I.; Kim, J. W.; Lee, C. W.; Kim, K. Y.; Kim, B. H. [KAERI, Daejeon (Korea, Republic of)

    2011-07-15

    A benchmarking for the test facility, evaluations of the prompt radiation fields, evaluation of the induced activities in the facility, and estimation of the radiological impact on the environment were performed in this study. and the radiation safety analysis report for nuclear licensing was written based on this study. In the benchmark calculation, the neutron spectra was measured in the 20 Mev test facility and the measurements were compared with the computational results to verify the calculation system. In the evaluation of the prompt radiation fields, the shielding design for 100 MeV target rooms, evaluations of the leakage doses from the accidents and skyshine analysis were performed. The evaluation of the induced activities were performed for the coolant, inside air, structural materials, soil and ground-water. At last, the radiation safety analysis report was written based on results from these studies

  7. Radiation protection training at uranium hexafluoride and fuel fabrication plants

    International Nuclear Information System (INIS)

    Brodsky, A.; Soong, A.L.; Bell, J.

    1985-05-01

    This report provides general information and references useful for establishing or operating radiation safety training programs in plants that manufacture nuclear fuels, or process uranium compounds that are used in the manufacture of nuclear fuels. In addition to a brief summary of the principles of effective management of radiation safety training, the report also contains an appendix that provides a comprehensive checklist of scientific, safety, and management topics, from which appropriate topics may be selected in preparing training outlines for various job categories or tasks pertaining to the uranium nuclear fuels industry. The report is designed for use by radiation safety training professionals who have the experience to utilize the report to not only select the appropriate topics, but also to tailor the specific details and depth of coverage of each training session to match both employee and management needs of a particular industrial operation. 26 refs., 3 tabs

  8. Internet applications in radiation safety

    International Nuclear Information System (INIS)

    Hill, P.; Geisse, C.; Wuest, E.

    1998-01-01

    As a means of effective communication the Internet is presently becoming more and more important in German speaking countries, too. Its possibilities to exchange and to obtain information efficiently and rapidly are excellent. Internet and email access are available now in most institutions for professional use. Internet services of importance to radiation safety professionals are described. (orig.) [de

  9. Qualifications of persons working in radiation user's organization and radiation protection training required for competence

    International Nuclear Information System (INIS)

    2004-04-01

    The Guide sets out the requirements governing the qualifications of persons working in userAes organizations and the radiation protection training required for such competence. It also sets out the requirements for training organizations arranging radiation safety officer training and exams. The Guide applies only to uses of radiation requiring a afety licence. The requirements for userAes organizations are set out in Guide ST 1.4

  10. Survey of Radiation Protection Education and Training in Finland in 2003

    International Nuclear Information System (INIS)

    Havukainen, R.; Korpela, H.; Vaisala, S.; Piri, A.; Kettunen, E.

    2004-01-01

    The current state and need for radiation protection training in Finland have been surveyed by the Radiation and Nuclear Safety Authority STUK. The survey sought to determine whether the current requirements for radiation protection training had been met, and to promote radiation protection training. Details of the scope and quality of present radiation protection training were requested from all educational institutes and organizations providing radiation protection training. The survey covered both basic and further training, special training of radiation safety officers, and supplementary training. The questionnaire was sent to 77 educational organization units, 66 per cent of which responded. Radiation workers and radiation safety officers were asked about radiation protection knowledge and needs for additional training. The questionnaire was sent to 880 radiation users and 170 radiation safety officers, 70 per cent of whom responded. The survey covered all professional groups and fields of the use of ionizing radiation except nuclear energy. The amount of radiation protection training in basic and further (specialization) training in the same vocational or academic degree varied remarkably by educational organization. The average amounts of radiation protection included in most professional degrees met the requirements. 32 per cent of workers considered their radiation protection training inadequate for their duties, and 48 per cent had completed no supplementary training in radiation protection over the last five years. Nurses working in public sector hospitals and physicians working in health centres had the greatest need for radiation protection training. 78 per cent of radiation workers in industry felt that they had sufficient radiation protection training. Co-operation between educational organizations is necessary to harmonize radiation protection training. Guidance of the Ministry of Education (the competent authority for education) is needed in this

  11. Safety Training: Access rights underground and safety training

    CERN Multimedia

    Laetitia Laddada

    2004-01-01

    This is to remind all CERN Group Leaders/GLIMOS of their obligation to ensure that members of their group/experiment or personnel belonging to firms holding contracts under their responsibility have received the necessary training/instruction in safety before start of work. Access underground will only be authorized upon attendance at safety courses level 1, 2 and 3, provided by the CERN Fire Brigade. All persons not having attended these courses will be locked out. All individuals concerned, as well as their Group Leaders/GLIMOS should check the access rights of their staff at the URL: https://hrt.cern.ch/servlet/cern.hrt.Access.Access In case you or your collaborators do not have the requested authorisation, you/they must attend the safety courses provided every Tuesday by the Fire Brigade or the additional courses on: 16 June, course given in French, 9 a.m. - 12 a.m., AB Auditorium I (Bldg. 6/2-024), 17 June, course given in English, 2 p.m. - 5 p.m., AB Auditorium I (Bldg. 6/2-024). Formation en SEC...

  12. Radiation Protection Training frame in Virgen del Rocio University Hospital

    International Nuclear Information System (INIS)

    Herrador, M.; Baeza, M.; Luis-Simon, J.; Carbajo, J.; Gomez-Puerto, A.; Gonzalez, V.; Mateos; Haro, G.; Gomez, M.

    2003-01-01

    The International Community has established a dose limitation system to control the risks due to the ionizing radiation pacific use. The education and training of the occupational exposed workers is necessary to achieve the objectives of this dose limitation system.The second largest contribution to exposures of the individuals worldwide after natural background radiation, comes from medical radiation procedures. For this reason, the radiation protection training of medical workers is essential. In the particular autonomous region of Andalusia, most medical radiation procedures comes from the Public Health Service. Therefore, Andalusia Healthy Service maintains a radiation protection training plan for their occupational exposed workers. This training plan includes: training of the radioactive facilities supervisors and operators in both nuclear medicine and radiotherapy areas; training for medical radiodiagnosis facility management; quality assurance in medical diagnosis and therapy; and update on radiation protection. The training plan is performed with theoretical and practical course homologated by the Spanish Nuclear Safety Council. These courses cover four basic fields related to radiation: Physics, Radiobiology, Radiation Protection and Legislation. These courses have been organised by the Andalusia Healthy System since 1993. A total of 722 medical workers have been trained for radiation protection. Therefore, optimum conditions for the safe and correct use of ionizing radiation have been provided to these workers. The supervisor or operator's license of the radioactive facility can be also obtained by these courses. (Author) 17 refs

  13. The European Nuclear Safety Training and Tutoring Institute

    International Nuclear Information System (INIS)

    2012-01-01

    The European Nuclear Safety Training and Tutoring Institute, ENSTTI, is an initiative of European Technical Safety Organizations (TSO) in order to provide vocational training and tutoring in the methods and practices required to perform assessment in nuclear safety, nuclear security and radiation protection. ENSTTI calls on TSOs' expertise to maximize the transmission of safety and security knowledge, practical experience and culture. Training, tutoring and courses for specialists are achieved through practical lectures, working group and technical visits and lead to a certificate after knowledge testing. ENSTTI contributes to the harmonization of nuclear safety and security practices and to the networking of today and future nuclear safety experts in Europe and beyond. (A.C.)

  14. Radiation Protection Training in Intracoronary Brachytherapy

    International Nuclear Information System (INIS)

    Prieto, C.; Vano, E.; Fernandez, J. M.; Sabate, M.; Galvan, C.; Meiggs, L.; Corral, J. M.

    2003-01-01

    To report the educational objectives and contents on Radiation Protection (RP) for the practice of Intracoronary Brachytherapy (ICB) procedures. The wide international experience on training programs for ICB as well as our own experience organizing several courses aimed at Cardiologists, Radio therapists and Medical Physicists has been used to elaborate specific RP objectives and contents. The objectives, differentiated for Cardiologists, Radio therapists, Medical Physicists, Nurses and Technicians, pretend to guarantee the safety and RP of both patient and staff in the procedures of ICB. The objectives are necessarily different because their RP formation and their role in the procedure are different. The general topics included in RP training programmes for ICB could be: general topics on RP (Interaction of radiation and matter, RP principles, radiobiology, etc), principles of operation of ICB and interventional X-ray equipment, quantification of radiation dose and risks, optimisation of protection of staff and patients, accidents and emergencies, regulations, responsibilities, quality assurance program, handling of ICB sources, installation and commissioning. Training programs based on the objectives presented in this paper would encourage positive safety culture in ICB and can also be used as a starting point by the Regulatory Authority for the authorization of new Installations and credentialing of professionals involved in this technique as well as for the continuous education of the staff involved. (Author) 10 refs

  15. Radiation safety and vascular access: attitudes among cardiologists worldwide

    Energy Technology Data Exchange (ETDEWEB)

    Vidovich, Mladen I., E-mail: miv@uic.edu [Department of Medicine, Division of Cardiology, University of Illinois at Chicago, Chicago, Illinois (United States); Khan, Asrar A. [Department of Medicine, Division of Cardiology, University of Illinois at Chicago, Chicago, Illinois (United States); Xie, Hui [Division of Epidemiology and Biostatistics and Cancer Center, University of Illinois at Chicago, Chicago, Illinois (United States); Shroff, Adhir R. [Department of Medicine, Division of Cardiology, University of Illinois at Chicago, Chicago, Illinois (United States)

    2015-03-15

    Objectives: To determine opinions and perceptions of interventional cardiologists on the topic of radiation and vascular access choice. Background: Transradial approach for cardiac catheterization has been increasing in popularity worldwide. There is evidence that transradial access (TRA) may be associated with increasing radiation doses compared to transfemoral access (TFA). Methods: We distributed a questionnaire to collect opinions of interventional cardiologists around the world. Results: Interventional cardiologists (n = 5332) were contacted by email to complete an on-line survey from September to October 2013. The response rate was 20% (n = 1084). TRA was used in 54% of percutaneous coronary interventions (PCIs). Most TRAs (80%) were performed with right radial access (RRA). Interventionalists perceived that TRA was associated with higher radiation exposure compared to TFA and that RRA was associated with higher radiation exposure that left radial access (LRA). Older interventionalists were more likely to use radiation protection equipment and those who underwent radiation safety training gave more importance to ALARA (as low as reasonably achievable). Nearly half the respondents stated they would perform more TRA if the radiation exposure was similar to TFA. While interventionalists in the United States placed less importance to certain radiation protective equipment, European operators were more concerned with physician and patient radiation. Conclusions: Interventionalists worldwide reported higher perceived radiation doses with TRA compared to TFA and RRA compared to LRA. Efforts should be directed toward encouraging consistent radiation safety training. Major investment and application of novel radiation protection tools and radiation dose reduction strategies should be pursued. - Highlights: • We examined radiation safety and arterial access practices among 1000 cardiologists. • Radial access is perceived as having higher radiation dose compared to

  16. Radiation protection technologist training and certification program

    International Nuclear Information System (INIS)

    1982-10-01

    The purpose of this program is to establish training requirements and methods for certifying the technical competence of Radiation Protection Technologists. This manual delineates general requirements as well as academic training, on-the-job training, area of facility training, and examination or evaluation requirements for Radiation Protection Trainees (Trainees), Junior Radiation Protection Technologists (JRPT), Radiation Protection Technologists (RPT), and Senior Radiation Protection Technologists (SRPT). This document also includes recertification requirements for SRPTs. The appendices include training course outlines, on-the-job training outlines, and training certification record forms

  17. Attitudes of teenagers towards workplace safety training.

    Science.gov (United States)

    Zierold, Kristina M; Welsh, Erin C; McGeeney, Teresa J

    2012-12-01

    More than 70 % of teenagers are employed before graduating high school. Every 10 min, in the United States, a young worker is injured on the job. Safety training has been suggested as a way to prevent injuries, yet little is known about the methods of safety training and the effectiveness of training that teens receive at work. This study is the first to assess the attitudes teens hold towards safety training and what they believe would help them stay safe on the job. In 2010, focus groups and interviews were conducted with 42 teens from public high schools in Jefferson County, Kentucky. Participating teens were aged 15-19 years old, 43 % male, 69 % African-American, and 56 % worked either in the restaurant/food industry or in retail jobs. Most teens reported receiving safety training. Although the majority believed that safety training was important, many felt that they personally did not need safety training; that it was "common sense." However, 52 % of teens reported workplace injuries. Many viewed injury lightly and as part of the job, even those that sustained severe injuries. Most teens were trained by methods that seem at best "boring" and at worst, ineffective. Little interaction, action, or repetition is used. Training is not geared towards teens' developmental levels or interest, as in most cases all workers received the same type of training. Safety training may be a powerful way to reduce injury rates among working teenagers, but it is essential that training methods which are geared towards teens are utilized.

  18. Building competence in radiation protection and the safe use of radiation sources. Safety guide (Spanish ed.)

    International Nuclear Information System (INIS)

    2010-01-01

    This Safety Guide makes recommendations concerning the building of competence in protection and safety within a national radiation protection infrastructure and provides guidance for setting up the structure for a national strategy. It relates to the training and assessment of qualification of new personnel and the retraining of existing personnel in order to develop and maintain appropriate levels of competence. It provides the necessary guidance to meet the requirements laid down in Safety Series No. 115, International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources. Contents: 1. Introduction; 2. Responsibilities for building competence in protection and safety; 3. Education, training and work experience; 4. A national strategy for building competence in protection and safety.

  19. Building competence in radiation protection and the safe use of radiation sources. Safety guide (Arabic ed.)

    International Nuclear Information System (INIS)

    2006-01-01

    This Safety Guide makes recommendations concerning the building of competence in protection and safety within a national radiation protection infrastructure and provides guidance for setting up the structure for a national strategy. It relates to the training and assessment of qualification of new personnel and the retraining of existing personnel in order to develop and maintain appropriate levels of competence. It provides the necessary guidance to meet the requirements laid down in Safety Series No. 115, International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources. Contents: 1. Introduction; 2. Responsibilities for building competence in protection and safety; 3. Education, training and work experience; 4. A national strategy for building competence in protection and safety.

  20. Reactor safety training for decision making

    International Nuclear Information System (INIS)

    Scott, C.K.

    2003-01-01

    The purpose of this paper is to describe an approach to reactor safety training for technical staff working at an operating station. The concept being developed is that, when the engineer becomes a registered professional engineer, they have sufficient reactor safety knowledge to perform independent technical work without compromising the safety of the plant. This goal would be achieved with a focused training program while working as an engineer-in-training (four years in NB). (author)

  1. Training courses on radiation protection

    International Nuclear Information System (INIS)

    1988-01-01

    Many Member States are developing or already have developed their own national training programmes. The IAEA is actively involved in promoting training in radiological protection, and this report has been prepared to provide the guidance that may be required in this development. The original version of the report on this subject was published in 1964 as Technical Reports Series No. 31 entitled ''Training in Radiological Protection: Curricula and Programming''. In 1975 a second version was published entitled ''Training in Radiological Protection for Nuclear Programmes'' as Technical Reports Series No. 166. This publication is intended mainly for use by persons who are responsible for organizing training programmes in radiation protection. It also reflects the policy of the Agency to have continuing standardized training in radiation protection. In addition to a small change in the title of the report, some concepts and ideas which are no longer applicable have been omitted and new information included. An important part of this report is the list of courses now offered in many Member States

  2. Training in Radiation Protection for Interventional Radiology

    Energy Technology Data Exchange (ETDEWEB)

    Vano, E.; Guibelalde, E.

    2002-07-01

    Several potential problems have been detected in the safety aspects for the practice of interventional radiology procedures: a) An important increase in the number cases and their complexity and the corresponding increase of installations and specialists involved; b) New X ray systems more sophisticated, with advanced operational possibilities, requiring special skills in the operators to obtain the expected benefits;c) New medical specialists arriving to the interventional arena to profit the benefits of the interventional techniques without previous experience in radiation protection. For that reason, education and training is one of the basic areas in any optimisation programme in radiation protection (RP). the medical field and especially interventional radiology requires actions to promote and to profit the benefit of the new emerging technologies for training (Internet, electronic books, etc). The EC has recently sponsored the MARTIR programme (Multimedia and Audio-visual Radiation Protection Training in Interventional Radiology) with the production of two videos on basic aspects of RP and quality control and one interactive CD-ROM to allow tailored individual training programmes. those educational tools are being distributed cost free in the main European languages. To go ahead with these actions, the EC has decided to promote during 2002, a forum with the main Medical European Societies involved in these interventional procedures. (Author)

  3. Training in Radiation Protection for Interventional Radiology

    International Nuclear Information System (INIS)

    Vano, E.; Guibelalde, E.

    2002-01-01

    Several potential problems have been detected in the safety aspects for the practice of interventional radiology procedures: a) An important increase in the number cases and their complexity and the corresponding increase of installations and specialists involved; b) New X ray systems more sophisticated, with advanced operational possibilities, requiring special skills in the operators to obtain the expected benefits;c) New medical specialists arriving to the interventional arena to profit the benefits of the interventional techniques without previous experience in radiation protection. For that reason, education and training is one of the basic areas in any optimisation programme in radiation protection (RP). the medical field and especially interventional radiology requires actions to promote and to profit the benefit of the new emerging technologies for training (Internet, electronic books, etc). The EC has recently sponsored the MARTIR programme (Multimedia and Audio-visual Radiation Protection Training in Interventional Radiology) with the production of two videos on basic aspects of RP and quality control and one interactive CD-ROM to allow tailored individual training programmes. those educational tools are being distributed cost free in the main European languages. To go ahead with these actions, the EC has decided to promote during 2002, a forum with the main Medical European Societies involved in these interventional procedures. (Author)

  4. Safety Training: places available in October 2014

    CERN Multimedia

    2014-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. Safety Training, HSE Unit safety-training@cern.ch Title of the course EN Title of the course FR Date Hours Language Chemical Safety ATEX Habilitation - Level 2 Habilitation ATEX - Niveau 2 16-Oct-14 to 17-Oct-14 9:00 - 17:30 French Cryogenic Safety Cryogenic Safety - Fundamentals Sécurité Cryogénie - Fondamentaux 23-Oct-14 10:00 - 12:00 English Cryogenic Safety - Helium Transfer Sécurité Cryogénie - Transfert d'hélium 30-Oct-14 9:30 - 12:00 English Electrical Safety Habilitation Electrique - Electrician Low Voltage - Initial Habilitation électrique - Électricien basse tension - Initial 02-Oct-14 to 06-Oct-14 9:00 - 17:30 English 20-Oct-14 to 22-Oct-14 9:00 -...

  5. Radiation Safety Awareness Among Medical Staff

    International Nuclear Information System (INIS)

    Szarmach, Arkadiusz; Piskunowicz, Maciej; Świętoń, Dominik; Muc, Adam; Mockałło, Gabor; Dzierżanowski, Jarosław; Szurowska, Edyta

    2015-01-01

    The common access to imaging methods based on ionizing radiation requires also radiation protection. The knowledge of ionizing radiation exposure risks among the medical staff is essential for planning diagnostic procedures and therapy. Evaluation of the knowledge of radiation safety during diagnostic procedures among the medical staff. The study consisted of a questionnaire survey. The questionnaire consisted of seven closed-ended questions concerning the knowledge of the effects of exposure to ionizing radiation as well as questions related to responder’s profession and work experience. The study group included a total of 150 individuals from four professional groups: nurses, doctors, medical technicians, support staff. The study was carried out in the three largest hospitals in Gdańsk between July and October 2013. The highest rates of correct answers to questions related to the issue of radiation protection were provided by the staff of radiology facilities and emergency departments with 1–5 years of professional experience. The most vulnerable group in terms of the knowledge of these issues consisted of individuals working at surgical wards with 11–15 years of professional experience. Education in the field of radiological protection should be a subject of periodic training of medical personnel regardless of position and length of service

  6. Training in radiation protection and the safe use of radiation sources

    International Nuclear Information System (INIS)

    2001-01-01

    The need for education and training in the various disciplines of radiation protection has long been recognized by the IAEA, the International Labour Organization (ILO), the United Nations Educational, Scientific and Cultural Organization, the World Health Organization and the Pan American Health Organization (PAHO). This need has been partially met through the many training courses undertaken by these organizations, either individually or in collaboration. The IAEA has assisted developing Member States in the training of specialists in radiation protection and safety through its organized educational and specialized training courses, workshops, seminars, fellowships and scientific visits. Training is an important means of promoting safety culture and enhancing the level of competence of personnel involved in radiation protection activities, and has acquired a place in the IAEA's programme accordingly. For example, the IAEA Post-graduate Educational Course in Radiation Protection and the Safe Use of Radiation Sources is regularly offered in countries around the world, and has been provided in Arabic, English, French, Spanish and Russian. The training provided by the IAEA is primarily aimed at regulators, professionals working in radiation protection and those responsible for the development of training programmes in their own countries. The importance of adequate and appropriate training for all those working with ionizing radiation has been highlighted by the results of the IAEA's investigations of radiological accidents. A significant contributory factor in a number of the accidents has been a lack of adequate training, which gave rise to errors with serious consequences. This report provides assistance in organizing training and complying with the requirements on training of the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (BSS). The previous version of this report. Technical Reports

  7. Building competence in radiation protection and the safe use of radiation sources. Safety guide

    International Nuclear Information System (INIS)

    2005-01-01

    An essential element of a national infrastructure for radiation protection and safety is the maintenance of an adequate number of competent personnel. This Safety Guide makes recommendations concerning the building of competence in protection and safety, which relate to the training and assessment of qualification of new personnel and retraining of existing personnel in order to develop and maintain appropriate levels of competence. This Safety Guide addresses training in protection and safety aspects in relation to all practices and intervention situations in nuclear and radiation related technologies. This document covers the following aspects: the categories of persons to be trained. The requirements for education, training and experience for each category. The processes of qualification and authorization of persons. A national strategy for building competence

  8. Radiation monitor training program at Rocky Flats

    International Nuclear Information System (INIS)

    Medina, L.C.; Kittinger, W.D.; Vogel, R.M.

    The Rocky Flats Radiation Monitor Training Program is tailored to train new health physics personnel in the field of radiation monitoring. The purpose of the prescribed materials and media is to be consistent in training in all areas of Rocky Flats radiation monitoring job involvement

  9. Nuclear safety education and training network

    International Nuclear Information System (INIS)

    Bastos, J.; Ulfkjaer, L.

    2004-01-01

    In March 2001, the Secretariat convened an Advisory Group on Education and Training in nuclear safety. The Advisory Group considered structure, scope and means related to the implementation of an IAEA Programme on Education and Training . A strategic plan was agreed and the following outputs were envisaged: 1. A Training Support Programme in nuclear safety, including a standardized and harmonized approach for training developed by the IAEA and in use by Member States. 2. National and regional training centres, established to support sustainable national nuclear safety infrastructures. 3. Training material for use by lecturers and students developed by the IAEA in English and translated to other languages. The implementation of the plan was initiated in 2002 emphasizing the preparation of training materials. In 2003 a pilot project for a network on Education and Training in Asia was initiated

  10. Training in ionizing radiation metrology: a systematic approach

    International Nuclear Information System (INIS)

    Peixoto, J.G.P.; Sales, E.; Wieland, P.

    2001-01-01

    This paper presents the systematic approach to training applied to the determination of backscattering factor of the mammography radiation qualities implemented at LNMRI/IRD/CNEN. The strategy for training includes the procedures described at the IAEA Safety Reports Series 201, i.e. analysis, design, implementation and evaluation with feedback . The training included theoretical and practical classes on dosimetry tools, interaction of radiation with matter, radiation protection, laboratory rules, and measurements and uncertainty analysis. At the end the trainee presents a seminar to show the competency acquired and to improve the scientific communication skills. (author)

  11. Radiation protection and the safety of radiation sources

    International Nuclear Information System (INIS)

    1996-01-01

    These Safety Fundamentals cover the protection of human beings against ionizing radiation (gamma and X rays and alpha, beta and other particles that can induce ionization as they interact with biological materials), referred to herein subsequently as radiation, and the safety of sources that produce ionizing radiation. The Fundamentals do not apply to non-ionizing radiation such as microwave, ultraviolet, visible and infrared radiation. They do not apply either to the control of non-radiological aspects of health and safety. They are, however, part of the overall framework of health and safety

  12. Proceeding of Radiation Safety and Environment

    International Nuclear Information System (INIS)

    1996-01-01

    Scientific Presentation of Radiation Safety and Environment was held on 20-21 august 1996 at Center of Research Atomic Energy Pasar Jum'at, Jakarta, Indonesia. Have presented 50 papers about Radiation Safety, dosimetry and standardization, environment protection and radiation effect

  13. Regulatory control of radiation sources. Safety guide

    International Nuclear Information System (INIS)

    2004-01-01

    The basic requirements for the protection of persons against exposure to ionizing radiation and for the safety of radiation sources were established in the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (the Basic Safety Standards), jointly sponsored by the Food and Agriculture Organization of the United Nations (FAO), the International Atomic Energy Agency (IAEA), the International Labour Organization (ILO), the OECD Nuclear Energy Agency (OECD/ NEA), the Pan American Health Organization (PAHO) and the World Health Organization (WHO) (the Sponsoring Organizations). The application of the Basic Safety Standards is based on the presumption that national infrastructures are in place to enable governments to discharge their responsibilities for radiation protection and safety. Requirements relating to the legal and governmental infrastructure for the safety of nuclear facilities and sources of ionizing radiation, radiation protection, the safe management of radioactive waste and the safe transport of radioactive material are established in the Safety Requirements on Legal and Governmental Infrastructure for Nuclear, Radiation, Radioactive Waste and Transport Safety, Safety Standards Series No. GS-R-1. This Safety Guide, which is jointly sponsored by the FAO, the IAEA, the International Labour Office, the PAHO and the WHO, gives detailed guidance on the key elements for the organization and operation of a national regulatory infrastructure for radiation safety, with particular reference to the functions of the national regulatory body that are necessary to ensure the implementation of the Basic Safety Standards. The Safety Guide is based technically on material first published in IAEA-TECDOC-10671, which was jointly sponsored by the FAO, the IAEA, the OECD/NEA, the PAHO and the WHO. The requirements established in GS-R-1 have been taken into account. The Safety Guide is oriented towards national

  14. Nuclear criticality safety: 2-day training course

    Energy Technology Data Exchange (ETDEWEB)

    Schlesser, J.A. [ed.] [comp.

    1997-02-01

    This compilation of notes is presented as a source reference for the criticality safety course. At the completion of this training course, the attendee will: be able to define terms commonly used in nuclear criticality safety; be able to appreciate the fundamentals of nuclear criticality safety; be able to identify factors which affect nuclear criticality safety; be able to identify examples of criticality controls as used as Los Alamos; be able to identify examples of circumstances present during criticality accidents; have participated in conducting two critical experiments; be asked to complete a critique of the nuclear criticality safety training course.

  15. Nuclear criticality safety: 2-day training course

    International Nuclear Information System (INIS)

    Schlesser, J.A.

    1997-02-01

    This compilation of notes is presented as a source reference for the criticality safety course. At the completion of this training course, the attendee will: be able to define terms commonly used in nuclear criticality safety; be able to appreciate the fundamentals of nuclear criticality safety; be able to identify factors which affect nuclear criticality safety; be able to identify examples of criticality controls as used as Los Alamos; be able to identify examples of circumstances present during criticality accidents; have participated in conducting two critical experiments; be asked to complete a critique of the nuclear criticality safety training course

  16. Safety training: places available in September 2014

    CERN Multimedia

    HSE Unit

    2014-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here).   Please note that there are 7 places left on the “Territorial Safety Officer (TSO) – Initial” course on September 23-25, 2014 (in French).

  17. Educational and experiential effects on radiographers' radiation safety behavior

    International Nuclear Information System (INIS)

    Tilson, E.R.

    1982-01-01

    Forty-four radiographers from 11 hospitals in Northern California were observed for radiation safety behaviors in six categories. A multiple regression analysis was performed to determine if there was a significant relationship between the six radiation safety behaviors and the radiographer's age, sex, type of professional training, years since completion of professional training, years of professional practice, time of day, and exposure frequency. The multiple regression analysis showed that there was a significant relationship between use of gonadal shielding and years since completion of professional training, years of professional practice, type of training, and age. The multiple regression analysis also showed that the number of repeated films due to technical error was significantly related to the type of professional training a radiographer received

  18. Radiation safety systems at the NSLS

    International Nuclear Information System (INIS)

    Dickinson, T.

    1987-04-01

    This report describes design principles that were used to establish the radiation safety systems at the National Synchrotron Light Source. The author described existing safety systems and the history of partial system failures. 1 fig

  19. Comparison of Radiation Protection Training in European Countries

    International Nuclear Information System (INIS)

    Kozelj, M.

    2001-01-01

    Full text: Practice and implementation of radiation protection in European countries and in majority of other countries all over the world relies on common principles and recommendations established by international organisations. These principles and recommendations were incorporated in national legislation ensuring similar and compatible standards of protection for occupationally exposed workers and members of the public. One of the basic requirements derived from international recommendations is also formal request for training of occupationally exposed workers. The final goals of the training are defined only indirectly through standards of safety and protection. Therefore national regulation regarding radiation protection training in particular country is a result of general approach to education and training, historical circumstances, influence and importance of nuclear technology and other factors influencing health protection and national well-being in general. The result is variety of national regulations ranging from very stringent and detailed to rather general and flexible. Nevertheless, results of implemented training do not differ sufficiently to significantly affect achieved standards of radiation protection. According to available information European countries implement radiation protection training in dissimilar ways. Institutions and organisations involved, as well as form and duration of training varies from country to country. Therefore, it is not possible to determine common rules just by reviewing radiation protection training in different countries. It is the intention of this contribution to analyse and discuss available information regarding radiation protection training and point out the necessity of international co-operation in this field, especially in the sense of the future trends. (author)

  20. Education of radiation safety specialists at Faculty of Medicine of Vilnius University

    International Nuclear Information System (INIS)

    Urbelis, A.; Surkiene, G.

    2004-01-01

    Vilnius University is the first institution of higher education in Lithuania that began to teach students on radiation safety. The special course of radiation hygiene was delivered to students in 1962-1992. In 1992 it was introduced residency of radiation hygiene and graduated students qualified for title of radiation hygiene specialist. The residency lasted one year and included six cycles: fundamentals of nuclear physics, statistics and noninfectious epidemiology, radiobiology, radiological research methods, controls of radiation safety and hygienic analysis of radiation safety. From 1994 Vilnius University has been educating and training professionals of public health. The specialists of radiation safety aren't been training as isolated branch. All courses is divided into two parts. The first one is included into bachelor, the second part - into master study. The bachelor study consists of 2 credits (16 hours for lectures and 32 hours for practical studies). The future bachelors study introduction of radiation safety, elements of nuclear physics, dose limit values, fundamentals of radiological protection, natural radiation. The master study consists of 2 credits (8 hours for lectures and 48 hours for practical studies). The future masters study specific problems of radiation safety in medicine and industry, the safety problems of nuclear power - stations, the problems of radioactive wastes, radiation biology, radiation risk. Radiation safety study model in Faculty of medicine of Vilnius University differs from study model in most European countries as it makes great play of radiation safety while usual model includes radiation safety as insignificant part of environmental health. (author)

  1. Promoting safety culture in radiation industry through radiation audit

    International Nuclear Information System (INIS)

    Noriah, M.A.

    2007-01-01

    This paper illustrates the Malaysian experience in implementing and promoting effective radiation safety program. Current management practice demands that an organization inculcate culture of safety in preventing radiation hazard. The aforementioned objectives of radiation protection can only be met when it is implemented and evaluated continuously. Commitment from the workforce to treat safety as a priority and the ability to turn a requirement into a practical language is also important to implement radiation safety policy efficiently. Maintaining and improving safety culture is a continuous process. There is a need to establish a program to measure, review and audit health and safety performance against predetermined standards. This program is known as radiation safety audit and is able to reveal where and when action is needed to make improvements to the systems of controls. A structured and proper radiation self-auditing system is seen as the sole requirement to meet the current and future needs in sustainability of radiation safety. As a result safety culture, which has been a vital element on safety in many industries can be improved and promote changes, leading to good safety performance and excellence. (author)

  2. Restaurant supervisor safety training: evaluating a small business training intervention.

    Science.gov (United States)

    Bush, Diane; Paleo, Lyn; Baker, Robin; Dewey, Robin; Toktogonova, Nurgul; Cornelio, Deogracia

    2009-01-01

    We developed and assessed a program designed to help small business owners/managers conduct short training sessions with their employees, involve employees in identifying and addressing workplace hazards, and make workplace changes (including physical and work practice changes) to improve workplace safety. During 2006, in partnership with a major workers' compensation insurance carrier and a restaurant trade association, university-based trainers conducted workshops for more than 200 restaurant and food service owners/managers. Workshop participants completed posttests to assess their knowledge, attitudes, and intentions to implement health and safety changes. On-site follow-up interviews with 10 participants were conducted three to six months after the training to assess the extent to which program components were used and worksite changes were made. Post-training assessments demonstrated that attendees increased their understanding and commitment to health and safety, and felt prepared to provide health and safety training to their employees. Follow-up interviews indicated that participants incorporated core program concepts into their training and supervision practices. Participants conducted training, discussed workplace hazards and solutions with employees, and made changes in the workplace and work practices to improve workers' health and safety. This program demonstrated that owners of small businesses can adopt a philosophy of employee involvement in their health and safety programs if provided with simple, easy-to-use materials and a training demonstration. Attending a workshop where they can interact with other owners/ managers of small restaurants was also a key to the program's success.

  3. Radiation safety for decommissioning projects

    International Nuclear Information System (INIS)

    Ross, A.C.

    1999-01-01

    Decommissioning of redundant nuclear facilities is a growth area in the UK at the present time. NUKEM Nuclear Limited is a leading-edge nuclear decommissioning and waste management contractor (with its own in-house health physics and safety department), working for a variety of clients throughout the UK nuclear industry. NUKEM Nuclear is part of the prestigious, international NUKEM group, a world-class organization specializing in nuclear engineering and utilities technologies. NUKEM Nuclear is involved in a number of large, complex decommissioning projects, both in its own right and as part of consortia. This paper explores the challenges presented by such projects and the interfaces of contractor, client and subcontractors from the point of view of a radiation protection adviser. (author)

  4. IAEA regional basic professional training on radiation protection

    International Nuclear Information System (INIS)

    1998-01-01

    This book contains the manuscripts of lectures of the Basic Professional Training Course on Radiation Protection which was organized and prepared on the basis of the standard syllabus put together in accordance with the recommendations of the International Basic safety standards for radiation protection against ionizing radiation and for safety of radiation sources (BSS). The course was intended to meet the educational and initial training requirements of personnel working in this field. The course is aimed at workers of a graduate level who are called on to take up position in the radiation protection field and who might someday become trainers in their home countries and institutions. Papers relevant to INIS are indexed separately

  5. Training program in radiation protection: implantation in a radiation oncology department

    International Nuclear Information System (INIS)

    Chretien, Mario; Morrier, Janelle; Cote, Carl; Lavallee, Marie C.

    2008-01-01

    Full text: Purpose: To introduce the radiation protection training program implemented in the radiation oncology department of the Hotel-Dieu de Quebec. This program seeks to provide an adequate training for all the clinic workers and to fulfill Canadian Nuclear Safety Commission's (CNSC) legislations. Materials and Methods: The radiation protection training program implemented is based on the use of five different education modalities: 1) Oral presentations, when the objective of the formation is to inform a large number of persons about general topics; 2) Periodic journals are published bimonthly and distributed to members of the department. They aim to answer frequently asked questions on the radiation safety domain. Each journal contains one main subject which is vulgarized and short notices, these later added to inform the readers about the departmental news and developments in radiation safety; 3) Electronic self-training presentations are divided into several units. Topics, durations, complexity and evaluations are adapted for different worker groups; 4) Posters are strategically displayed in the department in order to be read by all the radiation oncology employees, even those who are not specialized in the radiation protection area; 5) Simulations are organized for specialised workers to practice and to develop their skills in radiation protection situations as emergencies. A registration method was developed to record all training performed by each member of the department. Results: The training program implemented follows the CNSC recommendations. It allows about 150 members of the department to receive proper radiation safety training. The oral presentations allow an interaction between the trainer and the workers. The periodic journals are simple to write while ensuring continuous training. They are also easy to read and to understand. The e-learning units and their associated evaluations can be done at any time and everywhere in the department. The

  6. Occupational Safety. Hygiene Safety. Pre-Apprenticeship Phase 1 Training.

    Science.gov (United States)

    Lane Community Coll., Eugene, OR.

    This self-paced student training module on hygiene safety is one of a number of modules developed for Pre-apprenticeship Phase 1 Training. Purpose of the module is to familiarize students with the different types of airborne contaminants--including noise--which may be health hazards and with the proper hygienic measures for dealing with them. The…

  7. Radiation safety management system in a radioactive facility

    International Nuclear Information System (INIS)

    Amador, Zayda H.

    2008-01-01

    Full text: This paper illustrates the Cuban experience in implementing and promoting an effective radiation safety system for the Centre of Isotopes, the biggest radioactive facility of our country. Current management practice demands that an organization inculcate culture of safety in preventing radiation hazard. The aforementioned objectives of radiation protection can only be met when it is implemented and evaluated continuously. Commitment from the workforce to treat safety as a priority and the ability to turn a requirement into a practical language is also important to implement radiation safety policy efficiently. Maintaining and improving safety culture is a continuous process. There is a need to establish a program to measure, review and audit health and safety performance against predetermined standards. All those areas of the radiation protection program are considered (e.g. licensing and training of the staff, occupational exposure, authorization of the practices, control of the radioactive material, radiological occurrences, monitoring equipment, radioactive waste management, public exposure due to airborne effluents, audits and safety costs). A set of indicators designed to monitor key aspects of operational safety performance are used. Their trends over a period of time are analyzed with the modern information technologies, because this can provide an early warning to plant management for searching causes behind the observed changes. In addition to analyze the changes and trends, these indicators are compared against identified targets and goals to evaluate performance strengths and weaknesses. A structured and proper radiation self-auditing system is seen as a basic requirement to meet the current and future needs in sustainability of radiation safety. The integrated safety management system establishment has been identified as a goal and way for the continuous improvement. (author)

  8. Safety and economic study of special trains

    International Nuclear Information System (INIS)

    Loscutoff, W.V.; Hall, R.J.

    1976-01-01

    A comparative evaluation is being conducted of the safety and economics of special (35 mph and less) and regular trains for shipment of spent fuels. The approach, pertinent considerations, and results to date are discussed. The preliminary conclusion is that special train requirements have potential for only a small reduction in the accident likelihood, while increasing the cost

  9. Radiation safety requirements for radionuclide laboratories

    International Nuclear Information System (INIS)

    1993-01-01

    In accordance with the section 26 of the Finnish Radiation Act (592/91) the safety requirements to be taken into account in planning laboratories and other premises, which affect safety in the use of radioactive materials, are confirmed by the Finnish Centre for Radiation and Nuclear Safety. The guide specifies the requirements for laboratories and storage rooms in which radioactive materials are used or stored as unsealed sources. There are also some general instructions concerning work procedures in a radionuclide laboratory

  10. Radiation safety in welding and testing

    International Nuclear Information System (INIS)

    King, B.E.; Malaxos, M.; Hartley, B.M.

    1985-01-01

    There are a number of ways of achieving radiation safety in the workplace. The first is by engineering radiation safety into the equipment, providing shielded rooms and safety interlocks. The second is by following safe working procedures. The National Health and Medical Research Council's Code of practice for the control and safe handling of sealed radioactive sources used in industrial radiography (1968) sets out the standards which must be met by equipment to be used in industrial radiography

  11. Recent trends in particle accelerator radiation safety

    International Nuclear Information System (INIS)

    Ohnesorge, W.F.; Butler, H.M.

    1974-01-01

    The use of particle accelerators in applied and research activities continues to expand, bringing new machines with higher energy and current capabilities which create radiation safety problems not commonly encountered before. An overview is given of these increased ionizing radiation hazards, along with a discussion of some of the new techniques required in evaluating and controlling them. A computer search of the literature provided a relatively comprehensive list of publications describing accelerator radiation safety problems and related subjects

  12. Food safety through the training of 2-alcilciclobutanonas in processed foods by ionizing radiation; Seguranca alimentar atraves da formacao de 2-alcilciclobutanonas em alimentos processados por radiacao ionizante

    Energy Technology Data Exchange (ETDEWEB)

    Alves, Rodrigo Mendes

    2016-11-01

    Food irradiation is a means of preserving food which uses a processing technique that exposes the foods at a controlled high energy ionizing radiation. The treatment with the use of ionizing radiation in foods has many applications technologically and technically feasible, including the ability to improve the microbiological safety and reducing levels of pathogenic bacteria, inhibiting the germination of tubers plant application, preserving stored foods or the stability of storage and is also used to increase the shelf life of certain products due to the reduction of contamination by microorganisms. Due to the increase of international trade in food and the growing regulatory requirements of consumer markets increasingly importing and exporting countries have shown interest in food irradiation and conducted research in the practical application of this technology and detection methods of treatment. Numerous surveys were conducted worldwide, resulting in efficient protocols to identify which foods were irradiated or not. Until then, the 'myth' that irradiated food could not be detected and they were not formed any single radiation products has been replaced by the knowledge that many changes can occur in irradiated foods and these changes could be used as tools to identify this technology. The radiation processing resulting in characteristic patterns formations of saturated hydrocarbons, aldehydes, methyl and ethyl esters and 2-alcilciclobutanonas, depending on the fatty acid composition of the lipid that composes the food. Thus the purpose of this study was to collect data to compare the effects of different doses of gamma radiation and electron in foods that have fat to determine possible changes resulting from the use of irradiation, as the presence of 2-Alcilciclobutanonas and also show main equipment used for food irradiation and its categories, with the aim of informing the general public. (author)

  13. Safety, training focus of combined organization

    Energy Technology Data Exchange (ETDEWEB)

    Toop, L.

    2006-03-15

    This article presented details of Enform, a company that coordinates safety programs and training for new employees in the oil and gas industry. Enform was created when the Petroleum Industry Training Services merged with the Canadian Petroleum Safety Council. The aim of Enform is to ensure continuous improvements in health and safety within the industry by reducing working injuries and promoting health and safety practices. The companies merged to eliminate duplication of services and allow associates further opportunities for advanced training. In 2005, Enform trained an estimated 155,000 students, and a number of new courses were introduced and updated. A franchise program was extended and a training council was formed to offer direction and guidance to the oil industry. Enform focuses on sharing information among companies, as well as working to harmonize safety regulations across provincial borders. A task force was recently created by the company with a specific focus on drug and alcohol abuse. Other concerns include driver safety and driver interactions with wildlife. Enform is mainly focused on the traditional oil industry, and has had little entry into the oil sands industry. It was concluded that increased activity in the oil and gas industry will remain Enform's biggest challenge in the next few years. Plans for Enform's increased involvement in the offshore oil and gas industry were also discussed. 4 figs.

  14. Safety Training: a right or an obligation?

    CERN Multimedia

    HSE Unit

    2014-01-01

    CERN’s Safety Training programme currently offers around 50 classroom courses and 17 e-learning courses. Although anyone can attend any of these courses, some are compulsory for everyone working at CERN. In particular, “CERN Safety Introduction” and “Safety during LS1” are compulsory for all new arrivals.   The "Self-Rescue Mask" training course. Photo: Christoph Balle. However, depending on the type of activities, the type of workstation, the role you have been assigned (TSO, project leader, etc.) and/or the area where you will be working (e.g. confined spaces), you might be required to follow additional safety training provided by CERN. In accordance with the provisions of the CERN Safety Policy, members of the personnel must keep themselves informed of their obligations in terms of safety training and of the actions they must take to keep up to date. Most training courses are valid for three years, and as they reach the ...

  15. Nuclear criticality safety department training implementation

    International Nuclear Information System (INIS)

    Carroll, K.J.; Taylor, R.G.; Worley, C.A.

    1996-01-01

    The Nuclear Criticality Safety Department (NCSD) is committed to developing and maintaining a staff of qualified personnel to meet the current and anticipated needs in Nuclear Criticality Safety (NCS) at the Oak Ridge Y-12 Plant. The NCSD Qualification Program is described in Y/DD-694, Qualification Program, Nuclear Criticality Safety Department This document provides a listing of the roles and responsibilities of NCSD personnel with respect to training and details of the Training Management System (TMS) programs, Mentoring Checklists and Checksheets, as well as other documentation utilized to implement the program. This document supersedes Y/DD-696, Revision 2, dated 3/27/96, Training Implementation, Nuclear Criticality Safety Department. There are no backfit requirements associated with revisions to this document

  16. Radiation and waste safety: Strengthening national capabilities

    International Nuclear Information System (INIS)

    Barretto, P.; Webb, G.; Mrabit, K.

    1997-01-01

    For many years, the IAEA has been collecting information on national infrastructures for assuring safety in applications of nuclear and radiation technologies. For more than a decade, from 1984-95, information relevant to radiation safety particularly was obtained through more than 60 expert missions undertaken by Radiation Protection Advisory Teams (RAPATs) and follow-up technical visits and expert missions. The RAPAT programme documented major weaknesses and the reports provided useful background for preparation of national requests for IAEA technical assistance. Building on this experience and subsequent policy reviews, the IAEA took steps to more systematically evaluate the needs for technical assistance in areas of nuclear and radiation safety. The outcome was the development of an integrated system designed to more closely assess national priorities and needs for upgrading their infrastructures for radiation and waste safety

  17. Guide to good practice in radiation protection training

    International Nuclear Information System (INIS)

    Johnson, N.; Schenley, C.; Smith, A.; Weseman, M.

    1988-10-01

    This set of guidelines applies to radiation protection training programs for all Department of Energy (DOE) contractors, subcontractors, and visitors to DOE contractor facilities. It is to be used as a self-evaluation tool by DOE contractors as they develop and evaluate their training programs. This document is based on good practice guidelines used by a variety of different facilities both within and outside of the DOE contractor system. Good practices are not requirements; they are guidelines that contractors should use as they develop and conduct training programs. The applicability of the contents of the Guide to Good Practice in Radiation Protection Training depends upon each DOE facility's scope and need for radiation safety training. Although the focus of this document is radiation protection training, it is important that the process by which training is developed and implemented be discussed. Therefore, the first section presents guidelines for performance-based training and ideas to be considered regarding the structure and documentation of the training function

  18. Training of instructors on nuclear safety in Asian Countries

    Energy Technology Data Exchange (ETDEWEB)

    Ikuta, Yuko; Shitomi, Hajimu; Saeki, Masakatsu [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Nuclear Technology and Education Center

    2002-11-01

    Japan Atomic Energy Research Institute (JAERI)is conducting the international cooperation's of training of the foreign instructors and sending the Japanese teacher to the countries of Indonesia, Thailand (both from 1996) and Vietnam (2000). The training is performed in the JAERI for the future instructors of the concerned country for the period of essentially 2 months and is mainly on nuclear safety principles and safety handling of unsealed radioactive sources. Until 2001, 22 instructors from those countries have been trained in 142 courses. The sent Japanese teacher together with the trained instructor conduct the education of mainly radiation protection and measurement for personnel in ETC of BATAN (Education and Training Center, Indonesia atomic energy agency), radiation protection and atomic energy technology/application in OAEP (Office of Atomic Energy for Peace, Thailand) and the same subjects as BATAN in VAEC (Vietnam Atomic Energy Commission). Instruments for radiation measurement are essentially from Japan. This JAERI international cooperation will be open to other Asian countries. (K.H.)

  19. Training of instructors on nuclear safety in Asian Countries

    International Nuclear Information System (INIS)

    Ikuta, Yuko; Shitomi, Hajimu; Saeki, Masakatsu

    2002-01-01

    Japan Atomic Energy Research Institute (JAERI)is conducting the international cooperation's of training of the foreign instructors and sending the Japanese teacher to the countries of Indonesia, Thailand (both from 1996) and Vietnam (2000). The training is performed in the JAERI for the future instructors of the concerned country for the period of essentially 2 months and is mainly on nuclear safety principles and safety handling of unsealed radioactive sources. Until 2001, 22 instructors from those countries have been trained in 142 courses. The sent Japanese teacher together with the trained instructor conduct the education of mainly radiation protection and measurement for personnel in ETC of BATAN (Education and Training Center, Indonesia atomic energy agency), radiation protection and atomic energy technology/application in OAEP (Office of Atomic Energy for Peace, Thailand) and the same subjects as BATAN in VAEC (Vietnam Atomic Energy Commission). Instruments for radiation measurement are essentially from Japan. This JAERI international cooperation will be open to other Asian countries. (K.H.)

  20. Nuclear criticality safety: 2-day training course

    International Nuclear Information System (INIS)

    Schlesser, J.A.

    1992-11-01

    This compilation of notes is presented as a source reference for the criticality safety course. At the completion of this training course, the attendee will: (1) be able to define terms commonly used in nuclear criticality safety; (2) be able to appreciate the fundamentals of nuclear criticality safety; (3) be able to identify factors which affect nuclear criticality safety; (4) be able to identify examples of criticality controls as used at Los Alamos; (5) be able to identify examples of circumstances present during criticality accidents; (6) have participated in conducting two critical experiments

  1. Improving patient safety in radiation oncology

    International Nuclear Information System (INIS)

    Hendee, William R.; Herman, Michael G.

    2011-01-01

    Beginning in the 1990s, and emphasized in 2000 with the release of an Institute of Medicine report, healthcare providers and institutions have dedicated time and resources to reducing errors that impact the safety and well-being of patients. But in January 2010 the first of a series of articles appeared in the New York Times that described errors in radiation oncology that grievously impacted patients. In response, the American Association of Physicists in Medicine and the American Society of Radiation Oncology sponsored a working meeting entitled ''Safety in Radiation Therapy: A Call to Action''. The meeting attracted 400 attendees, including medical physicists, radiation oncologists, medical dosimetrists, radiation therapists, hospital administrators, regulators, and representatives of equipment manufacturers. The meeting was cohosted by 14 organizations in the United States and Canada. The meeting yielded 20 recommendations that provide a pathway to reducing errors and improving patient safety in radiation therapy facilities everywhere.

  2. Criticality safety training at Westinghouse Hanford Company

    International Nuclear Information System (INIS)

    Rogers, C.A.; Paglieri, J.N.

    1983-01-01

    In 1972 the Westinghouse Hanford Company (WHC) established a comprehensive program to certify personnel who handle fissionable materials. As the quantity of fissionable material handled at WHC has increased so has the scope of training to assure that all employes perform their work in a safe manner. This paper describes training for personnel engaged in fuel fabrication and handling activities. Most of this training is provided by the Fissionable Material Handlers Certification Program. This program meets or exceeds all DOE requirements for training and has been attended by more than 475 employes. Since the program was instituted, the rate of occurrence of criticality safety limit violations has decreased by 50%

  3. Decree of the State Office for Nuclear Safety No. 146/1997 of 18 June 1997 specifying activities which have an immediate impact on nuclear safety, and activities which are particularly important with respect to radiation protection, requirements for qualification and professional training, procedures for examining special professional competence and for granting certificates to selected personnel, and the scope and structure of documentation to be approved for permitting the training of selected personnel

    International Nuclear Information System (INIS)

    1997-01-01

    The Decree specifies requirements in the following fields: (a) activities which have an immediate impact on nuclear safety and activities which are particularly important with respect to radiation protection; (b) requirements for the qualification of selected personnel; (c) requirements for professional training of selected personnel of nuclear facilities and selected personnel handling ionizing radiation sources who are to gain special professional competence; (d) examination commission; (e) examination of special professional competence of selected personnel of nuclear facilities and selected personnel handling ionizing radiation sources; (f) granting permission to perform activities of selected personnel; and (g) scope and structure of documentation required to permit professional training of selected personnel of nuclear facilities and selected personnel handling ionizing radiation sources. (P.A.)

  4. Radiation safety in nuclear medicine procedures

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Sang Geon; Kim, Ja Hae; Song, Ho Chun [Dept. of Nuclear Medicine, Medical Radiation Safety Research Center, Chonnam National University Hospital, Gwangju (Korea, Republic of)

    2017-03-15

    Since the nuclear disaster at the Fukushima Daiichi Nuclear Power Plant in 2011, radiation safety has become an important issue in nuclear medicine. Many structured guidelines or recommendations of various academic societies or international campaigns demonstrate important issues of radiation safety in nuclear medicine procedures. There are ongoing efforts to fulfill the basic principles of radiation protection in daily nuclear medicine practice. This article reviews important principles of radiation protection in nuclear medicine procedures. Useful references, important issues, future perspectives of the optimization of nuclear medicine procedures, and diagnostic reference level are also discussed.

  5. Radiation safety in nuclear medicine procedures

    International Nuclear Information System (INIS)

    Cho, Sang Geon; Kim, Ja Hae; Song, Ho Chun

    2017-01-01

    Since the nuclear disaster at the Fukushima Daiichi Nuclear Power Plant in 2011, radiation safety has become an important issue in nuclear medicine. Many structured guidelines or recommendations of various academic societies or international campaigns demonstrate important issues of radiation safety in nuclear medicine procedures. There are ongoing efforts to fulfill the basic principles of radiation protection in daily nuclear medicine practice. This article reviews important principles of radiation protection in nuclear medicine procedures. Useful references, important issues, future perspectives of the optimization of nuclear medicine procedures, and diagnostic reference level are also discussed

  6. Needs For Education And Training In Radiation Protection: Kenya Experience

    International Nuclear Information System (INIS)

    Mustapha, A.O.; Kalambuka, H.A.; Maina, D.M.; Onyatta, J.; Kioko, J.; Masinza, S.; Kamande, J.

    2008-01-01

    Many nations, Kenya inclusive, have insufficient number of trained personnel to deal with regulatory and technical radiation safety issues. The IAEA Basic safety standards and the 96/29 EURATOM Directive put emphasis on education and training. Both organizations as well as IRPA have been proactive on training and educational issues. The Eastern Africa Association for Radiation Protection (EAARP) in collaboration with some national institutions has also been involved in awareness creation and provision of training and education opportunities for users of radioactive sources as well as the general public on issues related to radiation protection. Experience so far indicates that public demand is high for information and education in this area. In this paper we have identified the educational needs in radiation protection in the region using the Kenyan experience. The paper has also enumerated the available educational and training infrastructures, the human resources, as well as the important stake holders and their roles if a sustainable education and training program were to be developed in the region

  7. INDUSTRIAL TRAINING AND TRAINING IN SAFETY, A STATEMENT BY THE CENTRAL TRAINING COUNCIL. MEMORANDUM NUMBER 2.

    Science.gov (United States)

    Ministry of Labour, London (England).

    THE TRAINING OF WORKERS IN SAFETY AND IN SAFE METHODS OF WORK IS AN ESSENTIAL PART OF ACCIDENT PREVENTION. IT IS A MANAGEMENT RESPONSIBILITY TO DO THIS, AND, TO BE EFFECTIVE, MANAGEMENT ITSELF MUST BE CONVINCED OF THE NEED FOR SAFETY TRAINING. IT SHOULD BE CARRIED OUT AS PART OF THE NORMAL TRAINING WHICH ALL ENTRANTS TO INDUSTRY RECEIVE. THE…

  8. Nuclear and radiation safety in Slovenia. Annual report 1997

    International Nuclear Information System (INIS)

    1998-01-01

    The Slovenian Nuclear Safety Administration (SNSA), in co-operation with the Health Inspectorate of the Republic of Slovenia, the Administration for Civil Protection and Disaster Relief and the Ministry of the Interior, has prepared a Report on Nuclear and Radiation Safety in the Republic of Slovenia for 1997. This is one of the regular forms of reporting on the work of the Administration to the Government and National Assembly of the Republic of Slovenia. Contributions to the report were furthermore prepared by competent authorities in the field of nuclear safety: the Agency for Radwaste Management (ARAO), the Milan Copic Nuclear Training Centre, etc. The report contains 17 chapters. (author)

  9. Report on nuclear and radiation safety in Slovenia in 1997

    International Nuclear Information System (INIS)

    1998-06-01

    The Slovenian Nuclear Safety Administration (SNSA), in co-operation with the Health Inspectorate of the Republic of Slovenia, the Administration for Civil Protection and Disaster Relief and the Ministry of the Interior, has prepared a Report on Nuclear and Radiation Safety in the Republic of Slovenia for 1997. This is one of the regular forms of reporting on the work of the Administration to the Government and National Assembly of the Republic of Slovenia. Contributions to the report were furthermore prepared by competent authorities in the field of nuclear safety: the Agency for Radwaste Management (ARAO), the Milan Copic Nuclear Training Centre, etc. The report contains 19 chapters.

  10. Recommendations to improve radiation safety during invasive cardiovascular procedures

    International Nuclear Information System (INIS)

    Miranda, Patricia; Ubeda, Carlos; Vano, Eliseo; Nocetti, Diego

    2014-01-01

    In this paper we present guidelines aimed to improve radiation safety during invasive cardiovascular procedures. Unwanted effects upon patients and medical personnel are conventionally classified. A program of Quality Assurance is proposed, an aspect of which is a program for radiologic protection, including operator protection, radiation monitoring, shielding and personnel training. Permanent and specific actions should be taken at every cardiovascular lab, before, during and after interventions. In order to implement these guidelines and actions, a fundamental step is a review of current legislation. Specific programs for quality control and radiologic protection along with a definition of acceptable radiation exposure doses are required

  11. Interface between radiation protection and nuclear safety

    International Nuclear Information System (INIS)

    Bengtsson, G.; Hoegberg, L.

    1991-01-01

    Interface issues concern the character and management of overlaps between radiation protection and nuclear safety in nuclear power plants. Typical examples include the selection of inspection and maintenance volumes in order to balance occupational radiation doses versus the safety status of the plant, and the intentional release to the environment in the course of an accident in order to secure better plant control. The paper discusses whether it is desirable and possible to employ a consistent management of interface issues with trade-offs between nuclear safety and radiation protection. Illustrative examples are quoted from a major Nordic research programme on risk analysis and safety rationale. These concern for instance in-service inspections, modifications of plant systems and constructions after the plant has been taken into operation, and studies on the limitations of probabilistic safety assessment. They indicate that in general there are no simple rules for such trade-offs

  12. Radiation Safety in Industrial Radiography. Specific Safety Guide (French Edition); Surete radiologique en radiographie industrielle

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-05-15

    This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in Horizontal-Ellipsis shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography.

  13. Radiation Safety in Industrial Radiography. Specific Safety Guide (Spanish Edition); Seguridad radiologica en la radiografia industrial

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-12-15

    This Safety Guide provides recommendations for ensuring radiation safety in industrial radiography used in non-destructive testing. This includes industrial radiography work that utilizes X ray and gamma sources, both in shielded facilities that have effective engineering controls and in outside shielded facilities using mobile sources. Contents: 1. Introduction; 2. Duties and responsibilities; 3. Safety assessment; 4. Radiation protection programme; 5. Training and qualification; 6. Individual monitoring of workers; 7. Workplace monitoring; 8. Control of radioactive sources; 9. Safety of industrial radiography sources and exposure devices; 10. Radiography in shielded enclosures; 11. Site radiography; 12. Transport of radioactive sources; 13. Emergency preparedness and response; Appendix: IAEA categorization of radioactive sources; Annex I: Example safety assessment; Annex II: Overview of industrial radiography sources and equipment; Annex III: Examples of accidents in industrial radiography.

  14. UK HSE Training of HM Radiation Specialist Inspectors

    International Nuclear Information System (INIS)

    Nattres, E.; Barrett, J. A.

    2004-01-01

    HSE's mission is to ensure that risks to people's health and safety from work activities are properly controlled. Radiation Specialist Inspectors make an essential contribution to HSE's objectives through the application of their professional skills and knowledge. The role of the Radiation Specialist Inspector includes inspection work in the field to ensure compliance by employers with the Health and Safety at Work etc Act 1974, Ionising Radiations Regulations 1999 and associated legislation. They also contribute to research, and the development of technical policy, legislation, standards, and guidance on protection against the possible harm from exposure to electromagnetic fields, optical or ionizing radiation. This paper explains how Radiation Specialist Inspectors are trained. It starts with the recruitment process, with an emphasis on recruiting people who have already gained relevant experience from radiation work practices in previous employments. The interview process is explored, which includes both technical and behavioural interviews, making a presentation and completing a personality questionnaire. The initial twelve months training is then discussed in detail, including the six months as a general Health and Safety Inspector where inspector' skills and techniques' are developed by practical involvement in inspection, followed by a challenging six months with a Radiation Specialist group. The programme for this period is designed to broaden and develop skills and knowledge within the radiation protection specialist. After the initial twelve months probationary period, new Inspectors are expected to confirm and establish themselves in their role of Radiation Specialist Inspectors. However, it does not end there, continuing professional development to ensure that Inspectors have cutting edge knowledge of the latest advances within the radiation field and health and safety as a whole is essential and will be discussed in more detail. (Author) 6 refs

  15. Implementation of the INEEL safety analyst training standard

    International Nuclear Information System (INIS)

    Hochhalter, E. E.

    2000-01-01

    The Idaho Nuclear Technology and Engineering Center (INTEC) safety analysis units at the Idaho National Engineering and Environmental Laboratory (INEEL) are in the process of implementing the recently issued INEEL Safety Analyst Training Standard (STD-1107). Safety analyst training and qualifications are integral to the development and maintenance of core safety analysis capabilities. The INEEL Safety Analyst Training Standard (STD-1107) was developed directly from EFCOG Training Subgroup draft safety analyst training plan template, but has been adapted to the needs and requirements of the INEEL safety analysis community. The implementation of this Safety Analyst Training Standard is part of the Integrated Safety Management System (ISMS) Phase II Implementation currently underway at the INEEL. The objective of this paper is to discuss (1) the INEEL Safety Analyst Training Standard, (2) the development of the safety analyst individual training plans, (3) the implementation issues encountered during this initial phase of implementation, (4) the solutions developed, and (5) the implementation activities remaining to be completed

  16. SafetyNet. Human factors safety training on the Internet

    DEFF Research Database (Denmark)

    Hauland, G.; Pedrali, M.

    2002-01-01

    This report describes user requirements to an Internet based distance learning system of human factors training, i.e. the SafetyNet prototype, within the aviation (pilots and air traffic control), maritime and medical domains. User requirements totraining have been elicited through 19 semi...

  17. AFROSAFE Championing Radiation Safety in Africa

    International Nuclear Information System (INIS)

    Nyabanda, R.

    2015-01-01

    AFRASAFE is a campaign that was formed by Pan African congress of Radiology and imaging (PACOR) and other radiation health workers in Africa in Feb 2015. Its main objective is to unite with a common goal to identify and address issues arising from radiation protection in medicine in Africa. Through this campaign, we state that we shall promote adherence to policies, strategies and activities for the promotion of radiation safety and for maximization of benefits from radiological medical procedures. The campaign strengthens the overall radiation protection of patients, health workers and public. It promotes safe and appropriate use of ionizing radiation in medicine and enhances global information to help improve the benefit/risk dialogue with patients and the public. It enhances the safety and quality of radiological procedures in medicine, and encourages safety in diagnostic and therapeutic equipment and facilities. The issue of research in radiation protection and safety needs to be promoted. This presentation will outline the six strategic objectives and the implementation tools for radiation safety in medicine in Kenya, the challenges and way forward to achieve our goal. (Author)

  18. Radiation protection training for personnel employed in medical facilities

    International Nuclear Information System (INIS)

    McElroy, N.L.; Brodsky, A.

    1985-05-01

    This report provides information useful for planning and conducting radiation safety training in medical facilities to keep exposures as low as reasonably achievable, and to meet other regulatory, safety and loss prevention requirements in today's hospitals. A brief discussion of the elements and basic considerations of radation safety training programs is followed by a short bibliography of selected references and sample lecture (or session) outlines for various job categories. This information is intended for use by a professional who is thoroughly acquainted with the science and practice of radiation protection as well as the specific procedures and circumstances of the particular hospital's operations. Topics can be added or substracted, amplified or condensed as appropriate. 8 refs

  19. Radiation control through licensing and intensive training

    International Nuclear Information System (INIS)

    Cheng, C.-H.; Yang, Y.-C.; Wu, T.-Y.; Weng, P.-S.

    1982-01-01

    Various types of intensive training courses to suit radiation workers in different fields were sponsored by both the Atomic Energy Council of Executive Yuan and the National Health Administration of Executive Yuan, Republic of China during the past seven years. During the years 1974-79, the number of radiation workers attending each training course, their age, sex and educational background are presented in detail. The typical course contents for both medical and non-medical radiation workers are given. A summary of the percentage of passes and failures of the final examination given at the end of each training course is also given. The present status of licensing for radiation facilities and workers is described, and its results are indicated. The successful control of ionizing radiation through this kind of intensive training and licensing is evidenced in the film badge records given by a centralized service laboratory located at the National Tsing Hua University. (author)

  20. Dictionnary for radiation safety terminology

    International Nuclear Information System (INIS)

    1980-01-01

    The dictionnary of radiation protection terms has been compiled by CMEA member-country specialists under the auspisious of Scientific-Technical Council for Radiation Protection of the Permanent Commision for Peaceful Atomic Energy Applications as a means for better mutual understanding in collaborative activities. The dictionnary incorporates, along with Russian terms, the corresponding ones in the official languages of CMEA member-countries who participated in its compiling: Bulgarian, Hungarian, German, Spanish, Polish, Roumanian, Czech as well as English. The dictionnary consists of three sections: 1) Ionizing radiation; 2) Ionizing radiation interaction with materials. Ionizing radiation dosimetry; 3) Radiation protection. The first section contains 16 terms, the second - 25, the third - 110. The terms within the section are arranged in sense sequences

  1. Challenges in promoting radiation safety culture

    International Nuclear Information System (INIS)

    Mod Ali, Noriah

    2008-01-01

    Safety has quickly become an industry performance measure, and the emphasis on its reliability has always been part of a strategic commitment. This paper presents an approach taken by Malaysian Nuclear Agency (Nuclear Malaysia) and authority to develop and implement safety culture for industries that uses radioactive material and radiation sources. Maintaining and improving safety culture is a continuous process. There is a need to establish a program to measure, review and audit health and safety performance against predetermined standards. Proper safety audit will help to identify the non-compliance of safety culture as well as the deviation of management, individual and policy level commitment; review of radiation protection program and activities should be preceded. (author)

  2. Radiation Protection, Nuclear Safety and Security

    International Nuclear Information System (INIS)

    Faye, Ndeye Arame Boye; Ndao, Ababacar Sadikhe; Tall, Moustapha Sadibou

    2014-01-01

    Senegal has put in place a regulatory framework which allows to frame legally the use of radioactive sources. A regulatory authority has been established to ensure its application. It is in the process of carrying out its regulatory functions. It cooperates with appropriate national or international institutions operating in fields related to radiation protection, safety and nuclear safety.

  3. Winning public confidence in radiation safety standards

    International Nuclear Information System (INIS)

    Skelcher, B.W.

    1982-01-01

    Evaluations using cost/benefit analysis and the ALARA principle should take account of psychological as well as material considerations. Safety is a basic human need which has to be met. It is also subjective and therefore has to be understood by the individual. The professional health physicist has a duty to see that radiation safety is understood by the general public. (author)

  4. Radiation Safety (General) Regulations 1983 (Western Australia)

    International Nuclear Information System (INIS)

    1983-01-01

    The provisions of the Regulations cover, inter alia, the general precautions and requirements relating to radiation safety of the public and radiation workers and registration of irradiating apparatus or premises on which such apparatus is operated. In addition, the Regulations set forth requirements for the operation of such apparatus and for the premises involved. (NEA) [fr

  5. Training aspects contributing to radiation protection

    International Nuclear Information System (INIS)

    Gupta, M.S.

    2001-01-01

    Radiation Protection assumes special significance with increasing use of radioactive materials and processes. Scientific and industrial organisations dealing with radioactive materials have prime responsibility of ensuring effective control of all activities which may lead to radiation exposure. Training of all the persons involved in the work associated with radioactivity is absolutely necessary to develop radiation protection skill, radiation measurement proficiency and special precautions to be taken in abnormal situations. NPCIL having responsibility for design, construction, operation and de-commissioning of nuclear power plants, employs about 10,000 workers on several project/station sites all over the country. NPCIL has developed a good training system to accurately control the exposure of workers to radiation. This paper covers the system and other relevant details of radiation protection training organised by NPCIL. (author)

  6. Argentina, regional training center on radiation protection for Latin America

    International Nuclear Information System (INIS)

    Terrado, Carlos A.; Menossi, Carlos A.

    2008-01-01

    Argentina has an extensive background in education and training on Radiation Protection. Since the beginning of the nuclear activity in the country, prominence was given to the aspects related to radiation protection and training of the personnel involved in the use of ionizing radiation. These educative activities have been delivered for more than 50 years, having accumulated an important experience in the field. The Nuclear Regulatory Authority has the statutory obligation to address, among other matters, the control of the aspects of nuclear safety and radiation protection on the whole country, to protect the people of the harmful effects of ionizing radiation resulting from the nuclear activities. This includes the responsibility to develop and enforce the regulations, standards and other requirements, particularly, establishing the requests and promoting activities regarding education and training on radiation protection. Argentina, currently through the Nuclear Regulatory Authority, has performed postgraduate courses on radiation protection and nuclear safety at inter regional and regional level for 28 years without interruption. This important experience has been valued and exploited to form a Regional Center on Education and Training for Latin America and the Caribbean, sponsored by the International Atomic Energy Agency. The Regional Center that in fact has been running in Argentina, trained 404 foreign participants and 327 local participants since 1980, totalizing 731 graduates from our annual post graduate courses. Our commitment is that all the effort made in education and training on radiation protection and nuclear safety contributes to a better use of the benefits of nuclear development. Since 2001 the International Atomic Energy Agency raised the need to develop plans and establish agreements to ensure a long-term sustainability of the education and training programs, allowing a better use of the resources in this area. In order to achieve this goal

  7. Criticality safety engineer training at WSRC

    International Nuclear Information System (INIS)

    Williamson, T.G.; Mincey, J.F.

    1993-01-01

    Two programs designed to prepare engineers for certification as criticality safety engineers are offered at Westinghouse Savannah River Company (WSRC). One program, Student On Loan Criticality Engineer Training (SOLCET), is an intensive 2-yr course involving lectures, rigorous problem assignments, and mentoring. The other program, In-Field Criticality Engineer Training (IN-FIELD), is a less intensive series of lectures and problem assignments. Both courses are conducted by members of the Applied Physics Group (APG) of the Savannah River Technical Center, the organization at WSRC responsible for the operation and maintenance of criticality codes and for training of code users

  8. Validity of your safety awareness training

    CERN Multimedia

    DG Unit

    2010-01-01

    AIS is setting up an automatic e-mail reminder system for safety training. You are invited to forward this message to everyone concerned. Reminder: Please check the validity of your Safety courses Since April 2009 the compulsory basic Safety awareness courses (levels 1, 2 and 3) have been accessible on a "self-service" basis on the web (see CERN Bulletin). Participants are required to pass a test at the end of each course. The test is valid for 3 years so courses must be repeated on a regular basis. A system of automatic e-mail reminders already exists for level 4 courses on SIR and will be extended to the other levels shortly. The number of levels you are required to complete depends on your professional category. Activity Personnel concerned Level 1 Level 2 Level 3 Level 4     Basic safety Basic Safety ...

  9. Evolution of radiation protection training programmes in Spain

    Energy Technology Data Exchange (ETDEWEB)

    Monica, Rodriguez Suarez; Elvira, Hernando Velasco; Javier, Menarguez; Javier, Fernandez; Susana, Falcon; Mirian, Bravo [CIEMAT - Radiation Protection Training Unit ( IEE), Madrid (Spain)

    2006-07-01

    Education and training are an important tool to promote safety culture and to upgrade competence. In this sense, Radiation Protection (R.P.) training programmes are a major challenge in order to achieve occupational, public and environmental radiation protection in all applied fields of ionising radiation.The Spanish R.P. Education and Training system provides a solid and integrated educational model. The needs for a specialized training on R.P. for exposed workers appears into the Spanish regulation in 1964. Since then, a wide variety of R.P. initial, continuous and on the job training courses has been carried out, taking into account the diverse applied fields, the different levels of responsibilities, the technological and methodological advances, as well as the international trends. C.I.E.M.A.T., through the R.P. training Unit, has been organizing and developing most of the R.P. training in Spain since 1964, becoming a reference centre. The educational programmes are being continuously updating and improving in order to complete and adapt all R.P. training levels. Initial training, long-life training, updating or upgrading training, as well as other innovative courses related with R.P. are being offered by C.I.E.M.A.T. each year. Another important aspect of R.P. is the information and training to stake holders. C.I.E.M.A. T. is also working in this sense. The purpose of this paper is to analyse the evolution of R.P. training processes since 1964 in Spain, in order to conclude which are the future trends and the changes required to adapt the Spanish R.P. Education and Training system to the current needs and upcoming scene. (authors)

  10. Evolution of radiation protection training programmes in Spain

    International Nuclear Information System (INIS)

    Monica, Rodriguez Suarez; Elvira, Hernando Velasco; Javier, Menarguez; Javier, Fernandez; Susana, Falcon; Mirian, Bravo

    2006-01-01

    Education and training are an important tool to promote safety culture and to upgrade competence. In this sense, Radiation Protection (R.P.) training programmes are a major challenge in order to achieve occupational, public and environmental radiation protection in all applied fields of ionising radiation.The Spanish R.P. Education and Training system provides a solid and integrated educational model. The needs for a specialized training on R.P. for exposed workers appears into the Spanish regulation in 1964. Since then, a wide variety of R.P. initial, continuous and on the job training courses has been carried out, taking into account the diverse applied fields, the different levels of responsibilities, the technological and methodological advances, as well as the international trends. C.I.E.M.A.T., through the R.P. training Unit, has been organizing and developing most of the R.P. training in Spain since 1964, becoming a reference centre. The educational programmes are being continuously updating and improving in order to complete and adapt all R.P. training levels. Initial training, long-life training, updating or upgrading training, as well as other innovative courses related with R.P. are being offered by C.I.E.M.A.T. each year. Another important aspect of R.P. is the information and training to stake holders. C.I.E.M.A. T. is also working in this sense. The purpose of this paper is to analyse the evolution of R.P. training processes since 1964 in Spain, in order to conclude which are the future trends and the changes required to adapt the Spanish R.P. Education and Training system to the current needs and upcoming scene. (authors)

  11. The development of Radiation Protection Training courses in the UK

    International Nuclear Information System (INIS)

    Paynter, R. A.

    2003-01-01

    This paper considers use of modern training materials and aids in radiation protection training activities. The development in the UK of training courses to satisfy the training requirements for Radiation Protection Advisers is also discussed. (Author)

  12. Health effects of radiation and the implications for radiation safety

    International Nuclear Information System (INIS)

    Gonzalez, A.J.; Anderer, J.

    1991-01-01

    In this Paper two elements of a multiphase analysis of radiation exposures in the living environment - the human health effects of ionizing radiation and the implications for radiation safety policy and practices - are presented. Part 1 draws together the current state of scientific knowledge and insight about the human health effects of radiation, describing these in terms of known cause-related deterministic effects and of the estimated incidence of stochastic effects as defined by biostatistics and biological models. The 1988 UNSCEAR report provides an authoritative basis for such an examination. Part 2 explores some of the major implications that the state-of-the-art of radiation biology has - or should have - for radiation safety policy and practices. (author)

  13. Safety Culture on radiation protection

    International Nuclear Information System (INIS)

    Sollet, E.

    1996-01-01

    It can be defined radiation protection culture as the set of technical and social standards applied to the management of the operation of a nuclear facility concerning the reduction of the exposure to radiation of workers and members of the public, together with the behaviour and attitudes of the individuals from the organization towards that objective. Because the basic principles of radiation protection are self-evident and are totally justified, and the thesis drawn from the article is that no effective radiation protection culture yet exists within the organization, it must be concluded that what is wrong from the system are the attitudes and behavior of the individuals. In this article some factors and elements needed to motivate all persons within the organization towards the creation of a radiation protection culture are delineated and presented. (Author)

  14. Establishment of radiation protection and safety programme in Nuclear Medicine

    International Nuclear Information System (INIS)

    Chene, E.

    2014-04-01

    Radiation is useful because of its ability to penetrate tissue, allowing imaging of internal structures. However radiation may produce harmful biological effects. Observations of exposed human populations and animal experimentation indicate that exposure to low levels of radiation over a period of time may lead to stochastic radiation effects. Exposures to high levels of radiation above threshold also leads to deterministic effects. Establishment of radiation protection and safety programme and implement it without fail may help prevent deterministic effect and limit chances of stochastic effects. This is achieved by assigning responsibilities to the proposed organizational structure, management commitment to safety culture by providing continuous education and training to employees, regular reviewing and auditing of radiation safety policies. Occupational, public and environmental radiation exposure is further achieved by implementation of set local rules and operational procedures, proper management of radioactive waste and safe transport of radioactive material. Medical radiation exposure is achieved by justified procedures, optimization of doses, guidance levels, quality assurance and quality control programme through image quality, radiopharmaceutical quality and records keeping of radiation doses, calibration certificates of equipment used, equipment service and test certificates. Diagnostic radiopharmaceuticals must deliver the minimum possible radiation dose to the patient while therapeutic radiopharmaceuticals must deliver the maximum dose to the target organ or tissue, while minimizing the dose to non-target tissues such as the bone marrow. Special considerations shall be given to pregnant and breast-feeding patients. The proper facility design and shielding of a nuclear medicine facility shall further provide for the radiation protection to the worker, the patient, public and the environment. Precautions should be given to radioactive patients as there

  15. A Study on Enhancement of Understanding of Radiation and Safety Management

    International Nuclear Information System (INIS)

    Yoo, Dong Han; Park, Ji Young; Lee, Jae Uk; Bae, Jun Woo; Kim, Hee Reyoung

    2014-01-01

    Concerns for radiation exposure have been increased from small and big radiation works or experiments with radiation generator (RG) or radiation isotopes (RI) at institutions using radiation in Korea. Actually, due to radiation exposure occurred on the process of handling RI, etc., The exposure should be maintained as low as reasonably possible. To do this, above all, suitable training and establishment of safety culture have to be preceded. In this respect, an education institution is a place where people learn first about handling radiations in various specialties with purposes including academic research, and the first learned habits and practices acts as the basis for safety management of radiation when they continue to do radiation work after going into the society. Hereford, it is needed to establish the right safety culture on radiation for its safe managing. In the present study, the direction for the right understandings and safety improvement are suggested through the radiation survey on education institutions and preparation of safety guidances for users. The basic guidance at the radiation experiment was prepared for the right understanding of the radiation to prevent radiation accidents from careless handling by workers based on the surveyed results for education institutions. It is expected to be used as fundamentals for improvement for radiation safety management of workers and researchers and, further, safety policy for national nuclear energy and radiations

  16. A Study on Enhancement of Understanding of Radiation and Safety Management

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, Dong Han; Park, Ji Young; Lee, Jae Uk; Bae, Jun Woo; Kim, Hee Reyoung [Ulsan National Institute of Science and Technology, Ulsan (Korea, Republic of)

    2014-10-15

    Concerns for radiation exposure have been increased from small and big radiation works or experiments with radiation generator (RG) or radiation isotopes (RI) at institutions using radiation in Korea. Actually, due to radiation exposure occurred on the process of handling RI, etc., The exposure should be maintained as low as reasonably possible. To do this, above all, suitable training and establishment of safety culture have to be preceded. In this respect, an education institution is a place where people learn first about handling radiations in various specialties with purposes including academic research, and the first learned habits and practices acts as the basis for safety management of radiation when they continue to do radiation work after going into the society. Hereford, it is needed to establish the right safety culture on radiation for its safe managing. In the present study, the direction for the right understandings and safety improvement are suggested through the radiation survey on education institutions and preparation of safety guidances for users. The basic guidance at the radiation experiment was prepared for the right understanding of the radiation to prevent radiation accidents from careless handling by workers based on the surveyed results for education institutions. It is expected to be used as fundamentals for improvement for radiation safety management of workers and researchers and, further, safety policy for national nuclear energy and radiations.

  17. 28 CFR 345.83 - Job safety training.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Job safety training. 345.83 Section 345... INDUSTRIES (FPI) INMATE WORK PROGRAMS FPI Inmate Training and Scholarship Programs § 345.83 Job safety training. FPI provides inmates with regular job safety training which is developed and scheduled in...

  18. Radiation protection training and education in Europe.An overview

    International Nuclear Information System (INIS)

    Vahlbruch, Jan-Willem

    2013-01-01

    In order to realize radiation protection reliably mandatory protection goals have to be defined. These goals were formulated using the fundamentals of radiation protection and are described by the terms ''justification'', ''dose limitation'' and ''dose reduction and dose minimization''. While there is consensus within Europe with respect to the protection goals the implementation of one of the main components, the radiation protection education and training is regulated in very different ways in European countries. At the same time the necessity of comparable certificates is growing, which will be enhanced by the amendment of the EU BSS (basic safety standards). The authors recommend to study the different approaches to learn from each other.

  19. New infrastructures for training in radiation protection

    International Nuclear Information System (INIS)

    Marco, M.; Rodriguez, M.; Van der Steen, J.

    2007-01-01

    In this work, an analysis of the new infrastructure used in the radiation protection training and professional education, which is developed nowadays, is carried out. CIEMAT has been making many efforts in the education and training of professionals at all levels, for years. At present CIEMAT is developing educational activities in radiation protection general courses and professionals updating courses. The newest strategies for the radiation protection learning are developing in collaboration with professional societies. These try to encourage the technology transference, the collaboration between the actors involved with the radiation protection and the new information technology implementation. (Author) 11 refs

  20. Radiation safety in X-ray facilities

    International Nuclear Information System (INIS)

    2001-09-01

    The guide specifies the radiation safety requirements for structural shielding and other safety arrangements used in X-ray facilities in medical and veterinary X-ray activities and in industry, research and education. The guide is also applicable to premises in which X-ray equipment intended for radiation therapy and operating at a voltage of less than 25 kV is used. The guide applies to new X-ray facilities in which X-ray equipment that has been used elsewhere is transferred. The radiation safety requirements for radiation therapy X-ray devices operating at a voltage exceeding 25 kV, and for the premices in which such devices are used, are set out in Guide ST 2.2

  1. Radiation safety in X-ray facilities

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-09-01

    The guide specifies the radiation safety requirements for structural shielding and other safety arrangements used in X-ray facilities in medical and veterinary X-ray activities and in industry, research and education. The guide is also applicable to premises in which X-ray equipment intended for radiation therapy and operating at a voltage of less than 25 kV is used. The guide applies to new X-ray facilities in which X-ray equipment that has been used elsewhere is transferred. The radiation safety requirements for radiation therapy X-ray devices operating at a voltage exceeding 25 kV, and for the premices in which such devices are used, are set out in Guide ST 2.2.

  2. Radiation protection and safety in industrial radiography

    International Nuclear Information System (INIS)

    1999-01-01

    The use of ionizing radiation, particularly in medicine and industry, is growing throughout the world, with further expansion likely as technical developments result from research. One of the longest established applications of ionizing radiation is industrial radiography, which uses both X radiation and gamma radiation to investigate the integrity of equipment and structures. Industrial radiography is widespread in almost all Member States. It is indispensable to the quality assurance required in modern engineering practice and features in the work of multinational companies and small businesses alike. Industrial radiography is extremely versatile. The equipment required is relatively inexpensive and simple to operate. It may be highly portable and capable of being operated by a single worker in a wide range of different conditions, such as at remote construction sites, offshore locations and cross-country pipelines as well as in complex fabrication facilities. The associated hazards demand that safe working practices be developed in order to minimize the potential exposure of radiographers and other persons who may be in the vicinity of the work. The use of shielded enclosures (fixed facilities), with effective safety devices, significantly reduces any radiation exposures arising from the work. This Safety Report summarizes good and current state of the art practices in industrial radiography and provides technical advice on radiation protection and safety. It contains information for Regulatory Authorities, operating organizations, workers, equipment manufacturers and client organizations, with the intention of explaining their responsibilities and means to enhance radiation protection and safety in industrial radiography

  3. The IAEA Regional Training Course on Regulatory Control of Radiation Sources

    International Nuclear Information System (INIS)

    2000-01-01

    Materials of the IAEA Regional Training Course contains 8 presented lectures. Authors deals with regulatory control of radiation sources. The next materials of the IAEA were presented: Organization and implementation of a national regulatory infrastructure governing protection against ionizing radiation and the safety of radiation sources. (IAEA-TECDOC-1067); Safety assessment plants for authorization and inspection of radiation sources (IAEA-TECDOC-1113); Regulatory authority information system RAIS, Version 2.0, Instruction manual

  4. MO-AB-201-00: Radiation Safety Officer Update

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2015-06-15

    The role of the Radiation Safety Officer at a medical facility can be complicated. The complexity of the position is based on the breadth of services provided at the institution and the nature of the radioactive materials license. Medical practices are constantly changing and the use of ionizing radiation continues to rise in this area. Some of the newer medical applications involving radiation have unique regulatory and safety issues that must be addressed. Oversight of the uses of radiation start at the local level (radiation safety officer, radiation safety committee) and are heavily impacted by outside agencies (i.e. Nuclear Regulatory Commission, State Radiologic Health, The Joint Commission (TJC), etc). This session will provide both an overview of regulatory oversight and essential compliance practices as well as practical ways to assess and introduce some of the new applications utilizing radioactive materials into your medical facility. Learning Objectives: Regulatory Compliance and Safety with New Radiotherapies: Spheres and Ra-223 (Lance Phillips) Understand the radioactive materials license amendment process to add new radiotherapies (i.e., SIR-Spheres, Therasphere, Xofigo). Understand the AU approval process for microspheres and Xofigo. Examine the training and handling requirements for new procedures. Understand the process involved with protocol development, SOP in order to define roles and responsibilities. The RSO and The RSC: Challenges and Opportunities (Colin Dimock) Understand how to form an effective Committee. Examine what the Committee does for the Program and the RSO. Understand the importance of Committee engagement. Discuss the balance of the complimentary roles of the RSO and the Committee. The Alphabet Soup of Regulatory Compliance: Being Prepared for Inspections (Linda Kroger) Recognize the various regulatory bodies and organizations with oversight or impact in Nuclear Medicine, Radiology and Radiation Oncology. Examine 10CFR35

  5. MO-AB-201-00: Radiation Safety Officer Update

    International Nuclear Information System (INIS)

    2015-01-01

    The role of the Radiation Safety Officer at a medical facility can be complicated. The complexity of the position is based on the breadth of services provided at the institution and the nature of the radioactive materials license. Medical practices are constantly changing and the use of ionizing radiation continues to rise in this area. Some of the newer medical applications involving radiation have unique regulatory and safety issues that must be addressed. Oversight of the uses of radiation start at the local level (radiation safety officer, radiation safety committee) and are heavily impacted by outside agencies (i.e. Nuclear Regulatory Commission, State Radiologic Health, The Joint Commission (TJC), etc). This session will provide both an overview of regulatory oversight and essential compliance practices as well as practical ways to assess and introduce some of the new applications utilizing radioactive materials into your medical facility. Learning Objectives: Regulatory Compliance and Safety with New Radiotherapies: Spheres and Ra-223 (Lance Phillips) Understand the radioactive materials license amendment process to add new radiotherapies (i.e., SIR-Spheres, Therasphere, Xofigo). Understand the AU approval process for microspheres and Xofigo. Examine the training and handling requirements for new procedures. Understand the process involved with protocol development, SOP in order to define roles and responsibilities. The RSO and The RSC: Challenges and Opportunities (Colin Dimock) Understand how to form an effective Committee. Examine what the Committee does for the Program and the RSO. Understand the importance of Committee engagement. Discuss the balance of the complimentary roles of the RSO and the Committee. The Alphabet Soup of Regulatory Compliance: Being Prepared for Inspections (Linda Kroger) Recognize the various regulatory bodies and organizations with oversight or impact in Nuclear Medicine, Radiology and Radiation Oncology. Examine 10CFR35

  6. Space radiation and astronaut safety

    CERN Document Server

    Seedhouse, Erik

    2018-01-01

    This brief explores the biological effects of long-term radiation on astronauts in deep space. As missions progress beyond Earth's orbit and away from the protection of its magnetic shielding, astronauts risk constant exposure to higher levels of galactic cosmic rays and solar particle events. The text concisely addresses the full spectrum of biomedical consequences from exposure to space radiation and goes on to present possible ways to mitigate such dangers and protect astronauts within the limitations of existing technologies.

  7. Sense and purpose of radiation protection training

    International Nuclear Information System (INIS)

    Malasek, A.

    1992-04-01

    Training in radiation protection is of great significance in connection with the activities of the executive, the federal army and emergency organizations in emergency operations for the protection of the population in the case of large-scale radioactive contamination due to diverse causes. The presently valid legal situation of radiation protection training is presented in connection with the expected modification in the amendment to the SSVO. The special situation of radiation protection training for the executive, the federal army and emergency organizations is described and discussed in connection with the new aspects outlined in the draft of the new radiation protection regulation. In conclusion, problems arising in the conveyance of basic knowledge in radiation protection are illustrated by means of a concrete example. (author)

  8. ALARA in the radiation protection training

    International Nuclear Information System (INIS)

    Nolibe, D.; Lefaure, Ch.

    1998-01-01

    This part treats especially the question of the training in radiation protection. The electro nuclear sector has given an ALARA principle culture and succeeded to sensitize each level of hierarchy, but for small industry, the research and the medical world the same method appears more difficult to use. It seems better to reinforce the importance of the competent person and to include a training in radiation protection on the initial formation in numerous professional categories. (N.C.)

  9. Cernavoda NPP: Training for safety and reliability

    International Nuclear Information System (INIS)

    Postolache, Laura Lia

    2001-01-01

    The safe and reliable operation of NPP require successful integration of plant and system design (1), programmes and procedures (2) and qualified human resources (3). Of these three components, station personnel and management have capability to influence and improve programmes and competence of qualified personnel. Qualifying personnel includes selection, training and evaluation that meet the established performance standards. Training, therefore prepares people to achieve such competence. The critical role of operations personnel has been rightly emphasized by every country with a nuclear power programme. So far as operation team is concerned, they have to work, on the one hand with exacting safety rules and at the same time, they have to do the right thing at all times. In essence, they have to be prepared for new, emergency situations as well as for routine work. The plant operation in the Control Room is essentially a man - machine interaction and a safe and reliable operation requires them to take high quality decisions even under stressful conditions. Here lies therefore the need for high competent and licensed operations engineers who will ensure operation within the operating license of the station under the all conditions. The development of a long-term comprehensive training for Operation Staff is a requirement. The program addresses the qualification requirements of the various nuclear positions on shift, the outline content of the required training programs and the evaluation per the Systematic Approach to Training (SAT). A nuclear operator's training begins the moment he/she enters the station. It takes four to six years to develop the skills required to demonstrate that the candidate is an appropriate choice for the position. Then there's a further about two years of intense training at the Training Center on a simulator. After successful completion of the program, the candidate is authorized by the CNCAN (National Commission for Control of Nuclear

  10. Integration of radiation and physical safety in large radiator facilities

    International Nuclear Information System (INIS)

    Lima, P.P.M.; Benedito, A.M.; Lima, C.M.A.; Silva, F.C.A. da

    2017-01-01

    Growing international concern about radioactive sources after the Sept. 11, 2001 event has led to a strengthening of physical safety. There is evidence that the illicit use of radioactive sources is a real possibility and may result in harmful radiological consequences for the population and the environment. In Brazil there are about 2000 medical, industrial and research facilities with radioactive sources, of which 400 are Category 1 and 2 classified by the - International Atomic Energy Agency - AIEA, where large irradiators occupy a prominent position due to the very high cobalt-60 activities. The radiological safety is well established in these facilities, due to the intense work of the authorities in the Country. In the paper the main aspects on radiological and physical safety applied in the large radiators are presented, in order to integrate both concepts for the benefit of the safety as a whole. The research showed that the items related to radiation safety are well defined, for example, the tests on the access control devices to the irradiation room. On the other hand, items related to physical security, such as effective control of access to the company, use of safety cameras throughout the company, are not yet fully incorporated. Integration of radiation and physical safety is fundamental for total safety. The elaboration of a Brazilian regulation on the subject is of extreme importance

  11. The role of NCRRP in education and training on radiation protection

    International Nuclear Information System (INIS)

    Chobanova, N.

    2017-01-01

    Radiological protection is in constant motion, raised by new developments and research in the medical and industrial sectors. Radiation protection and safety associated with the application of ionizing radiation depends strongly on the skills and expertise of the professionals. The International Basic Safety Standard places great emphasis on education and training for all persons engaged in activities relevant to the protection and safety. For the professionals involved the most critical aspect it is the radiation protection. NCRRP is an established research center for education and training in radiation protection. Training is conducted by expert trainers with years of experience in the field of radiation protection. NCRRP organized courses and individual training on topics related to radiation protection: enhancing the qualifications of professionals from the medical and non medical fields; specialized training in radiation protection of different groups of professionals working with ionizing radiation sources; postgraduate education in radiation protection education of PhD within existing academic programs and give guidance to Master Students. In parallel the NCRRP aims to play a role in national and international policy through participation in European programs. Such is “CONCERT European Joint Programme for the integration of Radiation Protection Research”. The NCRRP develops, publish and distribute programs, newsletters, manuals and information materials for the benefit of the society. The implementation of a coherent approach to education and training becomes crucial in a world of dynamic markets and increasing workers’ mobility. Keywords: education, training, radiation protection, NCRRP

  12. Functions of the National Board for Atomic Safety and Radiation Protection of the German Democratic Republic

    International Nuclear Information System (INIS)

    1985-01-01

    Functions of the National Board for Atomic Safety and Radiation Protection of the GDR are described considering the following aspects: Nuclear plant safety, nuclear safeguards, physical protection, safety in working areas, environmental protection including radioactive waste management, protection of man by medical supervision and dosimetry, further training, international co-operation and information. (author)

  13. Radiation protection and safety in the Australian Defence Organisation (ADO)

    International Nuclear Information System (INIS)

    Jenks, G.J.; O'Donovan, E.J.B.

    1995-01-01

    Very few organisations have to address such a diverse and complex range of radiation safety matters as the Australian Defence Organisation. The Australian Defence Force and the Department of Defence (its military and civilian branches) have to comply with strict regulations in normal peace time activities. The Surgeon-General, to whom responsibility for policy in radiation protection and safety falls, has established a Defence Radiation Safety Committee, which in turn oversees four specialist subcommittees. Their tasks include recommending policy and doctrine in relation to radiation safety, overseeing the implementation of appropriate regulations, monitoring their compliance. generating the relevant documentation (particularly on procedures to be followed), developing and improving any necessary training courses, and providing sound technical advice whenever and to whomever required. The internal Defence regulations do not permit radiation doses to exceed those limits recommended by the Australian National Health and Medical Research Council and precautions are taken to ensure during normal peace time duties that these levels are not exceeded. At times of national emergency, the Surgeon-General provides guidance and advice to military commanders on the consequences of receiving dose levels that would not be permitted during normal peace time activities. The paper describes the methods adopted to implement such arrangements

  14. Nuclear criticality safety: 3-day training course

    International Nuclear Information System (INIS)

    Schlesser, J.A.

    1993-06-01

    The open-quotes 3-Day Training Courseclose quotes is an intensive course in criticality safety consisting of lectures and laboratory sessions, including active student participation in actual critical experiments, a visit to a plutonium processing facility, and in-depth discussions on safety philosophy. The program is directed toward personnel who currently have criticality safety responsibilities in the capacity of supervisory staff and/or line management. This compilation of notes is presented as a source reference for the criticality safety course. It represents the contributions of many people, particularly Tom McLaughlin, the course's primary instructor. It should be noted that when chapters were extracted, an attempt was made to maintain footnotes and references as originally written. Photographs and illustrations are numbered sequentially

  15. Meaningful radiation worker training for temporary craftsmen

    International Nuclear Information System (INIS)

    Williams, S.L.

    1976-01-01

    The carefully organized Radiation Worker Training Program presented to permanently assigned personnel at a power reactor facility too often falls by the wayside when temporary craftsmen are brought in for an outage. Even though these temporary workers will frequently be assigned to outage jobs with high radiation and/or contamination exposures, their Radiation Worker Training is often squeezed into an already busy schedule, thus reducing its effectiveness. As an aid for evaluating the effectiveness of an existing Radiation Worker Training Program for temporary craftsmen or for setting up a new program, the following guides are presented and discussed in this paper: the training environment; the interest and meaningfulness of the presentation; the method or methods used for presentation of the training information; the use of demonstrations; trainee participation; and, measuring the amount and type of information retained by a trainee. Meaningful Radiation Worker Training for temporary craftsmen can pay big dividends. Craftsmen can be expected to make fewer mistakes, thus reducing radiation exposure and lessening the chance for the spread of contamination. The craftsmen will also benefit by being able to work longer and utility management will benefit by having lower outage costs

  16. Developing a training program for radiation protection officers in industrial radiography

    International Nuclear Information System (INIS)

    Kinda, R.

    2013-04-01

    Non-Destructive Testing employs a variety of techniques which are used to test objects e.g. pipes, vessels, welded joints, castings and other devices for imperfections without interfering with their physical structure. The common methods of testing include magnetic particle, ultrasound, dye penetrant and industrial radiography using gamma emitting radiation sources and electronic x-ray emitting devices. Other methods used are acoustic emission testing, acoustic resonance testing, electromagnetic testing, infrared testing and leak testing. This project work focuses on training of RPOs in the areas where radiation is used, as improper use may lead to high radiation exposure. In order to ensure adequate protection and safety of staff and the public, the Radiation Protection Officers need to be thoroughly trained. With proper training the Radiation Protection Officer will have the ability to interpret legislative instruments and understand the requirements. The RPO will also be able to develop a Radiation Protection Plan and train fellow staff on radiation safety issues. A number of companies currently specialize in Industrial Radiography and this number is growing on a yearly basis. Since the increased use of radiation sources cannot be curbed, training Radiation Protection Officers will improve the radiation safety standards within these companies and promote the safe use of the radiation sources. Therefore this project covers the fundamental elements required to train Radiation Protection Officers in Industrial Radiography. (author)

  17. New safety training for access to the PS complex areas

    CERN Multimedia

    2012-01-01

    Since 10/08/2012, a new course dedicated to the specific radiological risks in the accelerators of the PS complex has been available on SIR (https://sir.cern.ch/). This course complements the general classroom-based Radiation Safety training. Successful completion of the course will be obligatory and verified by the access system as from 01/11/2012 for access to the following accelerator areas: LINAC2, BOOSTER, PS and TT2. Information and reminder e-mails will be sent to all persons currently authorized to access the accelerators of the PS complex. For questions please contact the HSE unit and in particular, the Radiation Protection Group (+41227672504 or safety-rp-ps-complex@cern.ch).

  18. Study of radiation safety education practices in acute care Texas hospitals

    International Nuclear Information System (INIS)

    Lemley, A.A.; Hedl, J.J. Jr.; Griffin, E.E.

    1987-01-01

    A survey study was performed to assess the extent of radiation safety education and training in acute care Texas hospitals for radiologic technologists and other hospital personnel. The findings revealed a self-perceived need by hospital administrative personnel and were interpreted to suggest a quantitative need for increased radiation safety education for several classes of hospital personnel. The findings are discussed relative to potential certification requirements for technologists and implications for the training of other personnel

  19. Development of an education and training programme for radiation protection officers in facilities and activities

    International Nuclear Information System (INIS)

    Mutwamezi, Tekla

    2015-02-01

    Education and training is a crucial matter in radiation protection and it is considered a regulatory requirement. For this reason, this project work focused on developing an education and training programme for Radiation Protection Officers whose overall function is to oversee radiation protection and safety at the work place. The developed education and training programme has adopted both the class room based and on the job training methods. Additionally, the programme is organized into 6 modules and focuses on fundamentals of radioactivity; biological effects; legislation; principles of radiation protection; assessment and protection against occupational exposure; medical exposure (only applicable to Radiation Protection Officers in the medical sector) and emergency preparedness and response. The purpose of the programme is to provide Radiation Protection Officers with the basic knowledge and skills to function effectively to meet radiation safety and regulatory requirements. (au)

  20. Radiation safety of soil moisture neutron probes

    International Nuclear Information System (INIS)

    Oresegun, M.O.

    2000-01-01

    The neutron probe measures sub-surface moisture in soil and other materials by means of high energy neutrons and a slow (thermal) neutron detector. Exposure to radiation, including neutrons, especially at high doses, can cause detrimental health effects. In order to achieve operational radiation safety, there must be compliance with protection and safety standards. The design and manufacture of commercially available neutron moisture gauges are such that risks to the health of the user have been greatly reduced. The major concern is radiation escape from the soil during measurement, especially under dry conditions and when the radius of influence is large. With appropriate work practices as well as good design and manufacture of gauges, recorded occupational doses have been well below recommended annual limits. It can be concluded that the use of neutron gauges poses not only acceptable health and safety risks but, in fact, the risks are negligible. Neutron gauges should not be classified as posing high potential health hazards. (author)

  1. Development of a training programme for radiation protection officers in industrial irradiators

    International Nuclear Information System (INIS)

    Mumuni, I. I.

    2014-01-01

    The International Basic Safety Standards (BSS) for Protection against Ionizing Radiation and for the Safety of Radiation Sources establish the basic requirements for protection against the risks associated with exposure to ionizing radiation and for the safety of radiation sources that may deliver such exposure. One important aspect of the Safety Standard is education and training of all personnel involved in the activities of radiation and radioactive sources. According to the BSS a Radiation Protection Officer is an individual technically competent in radiation protection matters relevant for a given type of practice who is designated by the registrant or licensee to oversee the application of the requirements of the standards. By this assigned role, radiation protection officers for industrial irradiators should be adequately trained since these facilities involve very high dose rates during irradiation, such that a person accidentally exposed can receive a lethal dose within minutes or seconds and fatalities can occur. This training among others things will enable the radiation protection officers to understand practical application of the IAEA Safety Standard to industrial irradiator facilities, understand the requirements for safety assessments and emergency plans, be able to develop a radiation protection programme for irradiators, be familiar with the different types of industrial irradiators and their applications and understand the safety philosophy and design requirements for industrial irradiators. (author)

  2. The IAEA safety standards for radiation, waste and nuclear safety

    International Nuclear Information System (INIS)

    Gonzalez, Abel J.

    1997-01-01

    This paper presents a brief description of the standards for radiation, waste and nuclear safety established by the International Atomic Energy Agency (IAEA). It provides a historical overview of their development and also summarizes the standards' current preparation and review process. The final paragraphs offer an outlook on future developments. (author)

  3. Radiation safety and care of patients

    International Nuclear Information System (INIS)

    Das, B.K.; Noreen Norfaraheen Lee Abdullah

    2012-01-01

    The objective of this chapter is to acquaint the reader with radiation safety measures which can be pursued to minimize radiation load to the patient and staff. The basic principle is that all unnecessary administration should be avoided and a number of simple techniques be used to reduce radiation dose. For example, the kidney excretes many radionuclides. Drinking plenty of fluid and frequent bladder emptying can minimize absorbed dose to the bladder. Thyroid blocking agents must be used if radioactive iodine is being administered to avoid unnecessary radiation exposure to the thyroid gland. When it is necessary to administer radioactive substances to a female of childbearing age, the radiation exposure should be minimum and information whether the patient is pregnant or not must be obtained. Alternatives techniques, which do not involve ionizing radiation, should also be considered. (author)

  4. Radiation safety. Handbook for laboratory workers in the USA

    International Nuclear Information System (INIS)

    Hotte, E.D.; Krueger, D.J.; Connor, K.

    2000-01-01

    The aim of the Handbook is to provide a source of information on radiation safety for those who are involved in the use of ionizing radiation in the laboratory. The potential reader may be a laboratory worker in the university or biomedical setting or the safety professional who desires a basic understanding of radiation protection within the research environment. The Handbook may be used as a reference by the radiation protection specialist or Radiation Safety Officer. To this end, liberal use is made of Appendices to make the Handbook a source of reference for a wide spectrum of readership while avoiding complicating the main body of the text. Each chapter or appendix is designed to stand alone. A complete reading of the Handbook will show that topics may be covered more than once. For example, one may read about the hazards and protective measures on handling radioiodine in Chapter 5 on Practical Radiation Protection as well as in Appendix 19 on Safe Handling of 125 I. Extensive use of figures, rather than tables has been made to present data, in the belief that these produce a good visual representation to a level of precision which is sufficient for most purposes of radiation protection in laboratories. The reader must remember that this Handbook should be taken as a guide only to the applicable regulations. You must consult the appropriate state or federal regulation directly or receive advice of a qualified radiation safety professional. Also, some information in the Appendices, such as commercially available training institutions or radioactive waste brokers, may change with time. Telephone numbers are given for the reader to call directly and check the services provided

  5. Radiation safety for site radiography

    International Nuclear Information System (INIS)

    1986-01-01

    This guidance is an update of the 1975 Code of Practice for Site Radiography and is for the use of employers and their radiographers who carry out site work. The subject is discussed under the following headings: Administrative organization, Personnel requirements, Equipment (x-ray and gamma-ray equipment, security, pipeline crawler equipment and safety equipment) Work methods and monitoring, Carriage of sources, Contingency plans, Legal considerations. (U.K.)

  6. Monitoring System For Improving Radiation Safety Management

    International Nuclear Information System (INIS)

    Osovizky, A.; Paran, J.; Tal, N.; Ankry, N.; Ashkenazi, B.; Tirosh, D.; Marziano, R.; Chisin, R.

    1999-01-01

    Medi SMARTS (Medical Survey Mapping Automatic Radiation Tracing System), a gamma radiation monitoring system, was installed in a nuclear medicine department. In this paper the evaluation of the system's ability to improve radiation safety management is presented. The system is based on a state of the art software that continuously collects on line radiation measurements for display, analysis and logging. Radiation is measured by GM tubes; the signal is transferred to a data processing unit and then via an RS-485 communication line to a computer. The system automatically identifies the detector type and its calibration factor, thus providing compatibility, maintainability and versatility when changing detectors. Radiation levels are displayed on the nuclear medicine department map at six locations. The system has been operating continuously for more than one year, documenting abnormal events caused by routine operation or failure incidents. In cases where abnormal working conditions were encountered, an alarm message was sent automatically to the supervisor via his tele-pager. An interesting issue observed during the system evaluation, was the inability to distinguish between high radiation levels caused by proper routine operation and those caused by safety failure incidents. The solution included examination of two parameters, radiation levels as well as their duration period. A careful analysis of the historical data, applying the appropriated combined parameters determined for each location, verified that such a system can identify abnormal events, provide alarms to warn in case of incidents and improve standard operating procedures

  7. Underwater inspection training in intense radiation field

    International Nuclear Information System (INIS)

    Taniguchi, Ryoichi

    2017-01-01

    Osaka Prefecture University has a large dose cobalt 60 gamma ray source of about 2 PBq, and is engaged in technological training and human resource development. It is assumed that the decommissioning underwater operation of Fukushima Daiichi Nuclear Power Station would be the focus. The university aims at acquisition of the basic of underwater inspection work under radiation environment that is useful for the above purpose, radiation measurement under water, basic training in image measurement, and aims as well to evaluate the damage of imaging equipment due to radiation, and master practical knowledge for the use of inspection equipment under a large dose. In particular, it is valuable to train in the observation of Cherenkov light emitted from a large dose cobalt radiation source in water using a high sensitivity camera. The measurement of radiation dose distribution in water had difficulty in remote measurement due to water shielding effect. Although it took much time before, the method using high sensitivity camera is easy to sequentially perform two-dimensional measurement, and its utility value is large. Its effect on the dose distribution measurement of irregularly shaped sources is great. The contents of training includes the following: radiation source imaging in water, use of a laser rangefinder in water, dose distribution measurement in water and Cherenkov light measurement, judgment of equipment damage due to irradiation, weak radiation measurement, and measurement and decontamination of surface contamination. (A.O.)

  8. Postgraduate educational course in radiation protection and the safety of radiation sources. Standard syllabus

    International Nuclear Information System (INIS)

    2003-01-01

    The aim of the Postgraduate Educational Course in Radiation Protection and the Safety of Radiation Sources is to meet the needs of professionals at graduate level, or the equivalent, for initial training to acquire a sound basis in radiation protection and the safety of radiation sources. The course also aims to provide the necessary basic tools for those who will become trainers in radiation protection and in the safe use of radiation sources in their countries. It is designed to provide both theoretical and practical training in the multidisciplinary scientific and/or technical bases of international recommendations and standards on radiation protection and their implementation. The participants should have had a formal education to a level equivalent to a university degree in the physical, chemical or life sciences or engineering and should have been selected to work in the field of radiation protection and the safe use of radiation sources in their countries. The present revision of the Standard Syllabus takes into account the requirements of the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (BSS), IAEA Safety Series No. 115 (1996) and recommendations of related Safety Guides, as well as experience gained from the Postgraduate Educational Course on Radiation Protection and Safety of Radiation Sources held in several regions in recent years. The general aim of the course, as mentioned, is the same. Some of the improvements in the present version are as follows: The learning objective of each part is specified. The prerequisites for each part are specified. The structure of the syllabus has been changed: the parts on Principles of Radiation Protection and on Regulatory Control were moved ahead of Dose Assessment and after Biological Effects of Radiation. The part on the interface with nuclear safety was dropped and a module on radiation protection in nuclear power plants has been included. A

  9. Postgraduate educational course in radiation protection and the safety of radiation sources. Standard syllabus

    International Nuclear Information System (INIS)

    2002-01-01

    The aim of the Postgraduate Educational Course in Radiation Protection and the Safety of Radiation Sources is to meet the needs of professionals at graduate level, or the equivalent, for initial training to acquire a sound basis in radiation protection and the safety of radiation sources. The course also aims to provide the necessary basic tools for those who will become trainers in radiation protection and in the safe use of radiation sources in their countries. It is designed to provide both theoretical and practical training in the multidisciplinary scientific and/or technical bases of international recommendations and standards on radiation protection and their implementation. The participants should have had a formal education to a level equivalent to a university degree in the physical, chemical or life sciences or engineering and should have been selected to work in the field of radiation protection and the safe use of radiation sources in their countries. The present revision of the Standard Syllabus takes into account the requirements of the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (BSS), IAEA Safety Series No. 115 (1996) and recommendations of related Safety Guides, as well as experience gained from the Postgraduate Educational Course on Radiation Protection and Safety of Radiation Sources held in several regions in recent years. The general aim of the course, as mentioned, is the same. Some of the improvements in the present version are as follows: The learning objective of each part is specified. The prerequisites for each part are specified. The structure of the syllabus has been changed: the parts on Principles of Radiation Protection and on Regulatory Control were moved ahead of Dose Assessment and after Biological Effects of Radiation. The part on the interface with nuclear safety was dropped and a module on radiation protection in nuclear power plants has been included. A

  10. Radiation (Safety Control) Ordinance 1978

    International Nuclear Information System (INIS)

    1978-01-01

    This Ordinance provides for the control, regulation, possession, use and transport of radioactive substance and irradiating apparatus. The Director of Health is responsible for administration of the Ordinance, which contains detailed provisions concerning the terms and conditions of licences, duties of licensees, medical examinations, maximum radiation doses, precautions to be taken to avoid exceeding such doses. The Ordinance also lays down a system of record-keeping and registration as well as packaging specifications for the transport of radioactive substances. (NEA) [fr

  11. Computerized based training in nuclear safety in the nuclear research center Negev

    International Nuclear Information System (INIS)

    Ben-Shachar, B.; Krubain, H.; Sberlo, E.

    2002-01-01

    The Department of Human Resources and Training in the Nuclear Research Center, Negev, in collaboration with the Department of Radiation Protection and Safety used to organize different kinds of training and refresher courses for different aspects of safety in nuclear centers (radiation safety, biological effects of ionizing radiation, industrial safety, fire fighting, emergency procedures, etc.). All radiation workers received a training program of several days in all these subjects, each year. The administrative employees received a shorter training, each second year. The training included only frontal lectures and no quiz or exams were done. No feedback of the employees was received after the training, as well. Recently, a new training program was developed by the NRC-Negev and the CET (Center for Educational Technology), in order to perform the refresher courses. The training includes CBT-s (Computer Based Training), e.g. tutorials and quiz. The tutorial is an interactive course in one subject, including animations, video films and photo stills. The employee gets a simple and clear explanation (including pictures). After each tutorial there is a quiz which includes 7 American style questions. In the following lecture different parts from two of the tutorials used for the refresher courses, will be presented

  12. Safety Training: "Manual Handling" course in September

    CERN Multimedia

    Safety Training, HSE Unit

    2016-01-01

    The next "Manual Handling" course will be given, in French, on 26 September 2016. This course is designed for anyone required to carry out manual handling of loads in the course of their work.   The main objective of this course is to adopt and apply the basic principles of physical safety and economy of effort. There are places available. If you are interested in following this course, please fill an EDH training request via our catalogue. 

  13. Radiation safety and inventory of sealed radiation sources in Pakistan

    International Nuclear Information System (INIS)

    Ali, M.; Mannan, A.

    2001-01-01

    Sealed radiation sources (SRS) of various types and activities are widely used in industry, medicine, agriculture, research and teaching in Pakistan. The proper maintenance of records of SRS is mandatory for users/licensees. Since 1956, more than 2000 radiation sources of different isotopes having activities of Bq to TBq have been imported. Of these, several hundred sources have been disposed of and some have been exported/returned to the suppliers. To ensure the safety and security of the sources and to control and regulate the safe use of radiation sources in various disciplines, the Directorate of Nuclear Safety and Radiation Protection (DNSRP), the implementing arm of the regulatory authority in the country, has introduced a system for notifying, registering and licensing the use of all types of SRS. In order to update the inventory of SRS used throughout the country, the DNSRP has developed a database. (author)

  14. Regulatory Control of Radiation Sources. Safety Guide

    International Nuclear Information System (INIS)

    2009-01-01

    This Safety Guide is intended to assist States in implementing the requirements established in Safety Standards Series No. GS-R-1, Legal and Governmental Infrastructure for Nuclear, Radiation, Radioactive Waste and Transport Safety, for a national regulatory infrastructure to regulate any practice involving radiation sources in medicine, industry, research, agriculture and education. The Safety Guide provides advice on the legislative basis for establishing regulatory bodies, including the effective independence of the regulatory body. It also provides guidance on implementing the functions and activities of regulatory bodies: the development of regulations and guides on radiation safety; implementation of a system for notification and authorization; carrying out regulatory inspections; taking necessary enforcement actions; and investigating accidents and circumstances potentially giving rise to accidents. The various aspects relating to the regulatory control of consumer products are explained, including justification, optimization of exposure, safety assessment and authorization. Guidance is also provided on the organization and staffing of regulatory bodies. Contents: 1. Introduction; 2. Legal framework for a regulatory infrastructure; 3. Principal functions and activities of the regulatory body; 4. Regulatory control of the supply of consumer products; 5. Functions of the regulatory body shared with other governmental agencies; 6. Organization and staffing of the regulatory body; 7. Documentation of the functions and activities of the regulatory body; 8. Support services; 9. Quality management for the regulatory system.

  15. OSHA Training Programs. Module SH-48. Safety and Health.

    Science.gov (United States)

    Center for Occupational Research and Development, Inc., Waco, TX.

    This student module on OSHA (Occupational Safety and Health Act) training programs is one of 50 modules concerned with job safety and health. This module provides a list of OSHA training requirements and describes OSHA training programs and other safety organizations' programs. Following the introduction, 11 objectives (each keyed to a page in the…

  16. Radiation safety in industrial applications of nuclear techniques

    International Nuclear Information System (INIS)

    Lam, E.S.

    1981-01-01

    The hazards associated with the use of industrial equipment is one of the undesirable by-products of advanced technology. The use of nuclear techniques is a good example. Due to the usefulness of such techniques, one may accept the risks involved if they can be brought down to manageable levels. Most of the nuclear techniques in use in industries in Malaysia require only minimal safety precautions as they make use of only small amounts of radioactive material. However, some large sources are also being used and safety precautions have to be strictly enforced. The management plays a critical role in these industries. The requirements for radiation safety include the monitoring of workers and work areas, the medical surveillance of workers and the provision of barriers and other safety precautions. The management should also look to the training of the workers and be prepared for any emergencies that may arise. (author)

  17. Radiation safety in industrial applications of nuclear techniques

    Energy Technology Data Exchange (ETDEWEB)

    Lam, E S [Ministry of Health, Kuala Lumpur (Malaysia)

    1981-01-01

    The hazards associated with the use of industrial equipment is one of the undesirable by-products of advanced technology. The use of nuclear techniques is a good example. Due to the usefulness of such techniques, one may accept the risks involved if they can be brought down to manageable levels. Most of the nuclear techniques in use in industries in Malaysia require only minimal safety precautions as they make use of only small amounts of radioactive material. However, some large sources are also being used and safety precautions have to be strictly enforced. The management plays a critical role in these industries. The requirements for radiation safety include the monitoring of workers and work areas, the medical surveillance of workers and the provision of barriers and other safety precautions. The management should also look to the training of the workers and be prepared for any emergencies that may arise.

  18. Availabilities in the June Safety Training sessions

    CERN Multimedia

    2010-01-01

    A few places are still available on the safety courses mentioned below. Please consult the Safety training catalogue to obtain all the latest information and to register. Clearance for work with electrical equipment ("Habilitation électrique") for non-electricians (classroom-based course), 9 June, in French, 8 hours from 9.00 am to 5.30 pm (10 places available) Safety in Cryogenics level 1, 14 June, in English, 3 hours from, 9.00 am to 12 noon (5 places available) Lift-truck operation ("Conduite de chariots élévateurs"), 24-25 June, in French, 2 days from 8.00 am to 5.30 pm (3 places available).

  19. Radiation Safety Professional Certification Process in a Multi-Disciplinary Association

    International Nuclear Information System (INIS)

    Wilson, G.; Jones, P.; Ilson, R.

    2004-01-01

    There is no one set of criteria that defines the radiation safety professional in Canada. The many varied positions, from university and medical to industry and mining, define different qualifications to manage radiation safety programs. The national regulatory body has to assess many different qualifications when determining if an individual is acceptable to be approved for the role of radiation safety officer under any given licence. Some professional organizations specify education requirements and work experience as a prerequisite to certification. The education component specifies a degree of some type but does not identify specific courses or competencies within that degree. This could result in individuals with varying levels of radiation safety experience and training. The Canadian Radiation Protection Association (CRPA), responding to a need identified by the membership of the association, has initiated a process where the varying levels of knowledge of radiation safety can be addressed for radiation safety professionals. By identifying a core level set of radiation safety competencies, the basic level of radiation safety officer for smaller organizations can be met. By adding specialty areas, education can be pursued to define the more complex needs of larger organizations. This competency based process meets the needs of licensees who do not require highly trained health physicists in order to meet the licensing requirements and at the same time provides a stepping stone for those who wish to pursue a more specialized health physics option. (Author) 8 refs

  20. Safety Training: scheduled sessions in March

    CERN Multimedia

    DGS Unit

    2011-01-01

    The following training courses are scheduled in March. You can find the full Safety Training programme on the Safety Training online catalogue. If you are interested in attending any of the below courses, please talk to your supervisor, then apply electronically via EDH from the course description pages, by clicking on SIGN-UP. Registration for all courses is always open – sessions for the less-requested courses are organized on a demand-basis only. Depending on the demand, a session will be organised later in the year. Biocell Training 08-MAR-11 (08.30 – 10.00) in English 08-MAR-11 (10.30 – 12.00) in French 15-MAR-11 (08.30 – 10.00) in French 15-MAR-11 (10.30 – 12.00) in French 17-MAR-11 (08.30 – 10.00) in English 17-MAR-11 (10.30 – 12.00) in English 22-MAR-11 (08.30 – 10.00) in French 22-MAR-11 (10.30 – 12.00) in French 24-MAR-11 (08.30 – 10.00) in French 24-MAR-11 (10.30 – 12.00) in French 29-MAR...

  1. Safety Training: scheduled sessions in May

    CERN Multimedia

    Isabelle Cusato (HSE Unit)

    2011-01-01

    The following training courses are scheduled in March. You can find the full Safety Training programme on the Safety Training online catalogue. If you are interested in attending any of the below courses, please talk to your supervisor, then apply electronically via EDH from the course description pages, by clicking on SIGN-UP. Registration for all courses is always open – sessions for the less-requested courses are organized on a demand-basis only. Depending on the demand, a session will be organised later in the year.   Biocell Training 10-MAY-11 (08.30 – 10.00) in French 10-MAY-11 (10.30 – 12.00) in French 12-MAY-11 (08.30 – 10.00) in English 12-MAY-11 (10.30 – 12.00) in English 19-MAY-11 (08.30 – 10.00) in French 19-MAY-11 (10.30 – 12.00) in French 24-MAY-11 (08.30 – 10.00) in English 24-MAY-11 (10.30 – 12.00) in English   Champs Magnétiques 13-MAY-11 (09.30 – 11.30) in French...

  2. Safety Training: scheduled sessions in April

    CERN Multimedia

    DGS Unit

    2011-01-01

    The following training courses are scheduled in April. You can find the full Safety Training programme on the Safety Training online catalogue. If you are interested in attending any of the below courses, please talk to your supervisor, then apply electronically via EDH from the course description pages, by clicking on SIGN-UP. Registration for all courses is always open – sessions for the less-requested courses are organized on a demand-basis only. Depending on the demand, a session will be organised later in the year. Biocell Training 26-APR-11 (08.30 – 10.00) in French 26-APR-11 (10.30 – 12.00) in French Conduite de plates-formes élévatrices mobiles de personnel (PEMP) 28-APR-11 to 29-APR-11 (08.00 – 17.30) in French* Sécurité chimique – Introduction 29-APR-11 (09.00 – 11.30) in French (*) session in French with the possibility of receiving the documentation in English   By Isabelle Cusato (H...

  3. Radiation safety standards : an environmentalist's approach

    International Nuclear Information System (INIS)

    Murthy, M.S.S.S.

    1977-01-01

    An integrated approach to the problem of environmental mutagenic hazards leads to the recommendation of a single dose-limit to the exposure of human beings to all man-made mutagenic agents including chemicals and radiation. However, because of lack of : (1) adequate information on chemical mutagens, (2) sufficient data on their risk estimates and (3) universally accepted dose-limites, control of chemical mutagens in the environment has not reached that advanced stage as that of radiation. In this situation, the radiation safety standards currently in use should be retained at their present levels. (M.G.B.)

  4. Radiation protection training and information for workers

    International Nuclear Information System (INIS)

    1989-01-01

    The meeting reported in these proceedings was organized to discuss the specific problems of providing information and training on radiation protection to workers exposed to radiation, intervention staff and workers likely to be affected by an activity involving ionizing radiation. Particular emphasis was placed on the need to harmonize basic training on radiation protection in the context of 1992. It seemed advisable for technical training on radiation protection to be introduced into secondary education. To this end, the Commission was asked to draw up a guide for apprentices and students. In view of the growing diversification of activities involving the use of radioactive substances, the Commission was called upon to intensify its efforts in order to ensure that relevant information and training was provided in all firms to workers exposed to ionizing radiation, and to produce guides for specific categories of workers, such as those responsible for the transport of radioactive materials or those likely to be involved in organizing measures in the event of a radiological emergency

  5. Nuclear Malaysia. Towards being a certification body for radiation safety auditors

    International Nuclear Information System (INIS)

    Nik Ali, Nik Arlina; Mudri, Nurul Huda; Mod Ali, Noriah

    2012-01-01

    Current management practice demands that an organisation inculcate safety culture in preventing radiation hazard. Radiation safety audit is known as a step in ensuring radiation safety compliance at all times. The purpose of Radiation Safety Auditing is to ensure that the radiation safety protection system is implemented in accordance to Malaysia Atomic Energy Licensing Act 1984, or Act 304, and International Standards. Competent radiation safety auditors are the main element that contributes to the effectiveness of the audit. To realise this need, Innovation Management Centre (IMC) is now in progress to be a certification body for safety auditor in collaboration with Nuclear Malaysia Training Centre (NMTC). NMTC will offer Radiation Safety Management Auditor (RSMA) course, which provide in depth knowledge and understanding on requirement on radiation safety audit that comply with the ISO/IEC 17024 General Requirements for Bodies Operating Certification Systems of Persons. Candidates who pass the exam will be certified as Radiation Safety Management Auditor, whose competency will be evaluated every three years. (author)

  6. Legal framework for a radiation safety infrastructure

    International Nuclear Information System (INIS)

    Bilbao, A.A.

    2000-01-01

    In this lecture the legal framework for a radiation safety infrastructure are presented. The objective of this lecture are: Legal framework; Regulatory programme; Role of Regulatory Authority in emergency situations; Assessment of the effectiveness of the regulatory programme; Cost effectiveness of the regulatory framework; and Priority actions

  7. Economic aspects of radiation safety in hospitals

    International Nuclear Information System (INIS)

    Subrahmanian, G.; Venkataraman, G.

    1977-01-01

    Radiation protection procedures to be adhered to while using radiological equipment in hospitals both for the patients and the medical personnel are described in detail. The hazards resulting from careless handling of equipment and the need for adequately trained staff to handle the equipment is stressed. (A.K.)

  8. International basic safety standards for protecting against ionizing radiation and for the safety of radiation sources

    International Nuclear Information System (INIS)

    1997-01-01

    The purpose of the Standards is to establish basic requirements for protection against the risks associated with exposure to ionizing radiation (hereinafter termed radiation) and for the safety of radiation sources that may deliver such exposure. The Standards have been developed from widely accepted radiation protection and safety principles, such as those published in the Annals of the ICRP and the IAEA Safety Series. They are intended to ensure the safety of all types of radiation sources and, in doing so, to complement standards already developed for large and complex radiation sources, such as nuclear reactors and radioactive waste management facilities. For the sources, more specific standards, such as those issued by the IAEA, are typically needed to achieve acceptable levels of safety. As these more specific standards are generally consistent with the Standards, in complying with them, such more complex installations will also generally comply with the Standards. The Standards are limited to specifying basic requirements of radiation protection and safety, with some guidance on how to apply them. General guidance on applying some of the requirements is available in the publications of the Sponsoring Organizations and additional guidance will be developed as needed in the light of experience gained in the application of the Standards

  9. International basic safety standards for protecting against ionizing radiation and for the safety of radiation sources

    International Nuclear Information System (INIS)

    1996-01-01

    The purpose of the Standards is to establish basic requirements for protection against the risks associated with exposure to ionizing radiation (hereinafter termed radiation) and for the safety of radiation sources that may deliver such exposure. The Standards have been developed from widely accepted radiation protection and safety principles, such as those published in the Annals of the ICRP and the IAEA Safety Series. They are intended to ensure the safety of all types of radiation sources and, in doing so, to complement standards already developed for large and complex radiation sources, such as nuclear reactors and radioactive waste management facilities. For the sources, more specific standards, such as those issued by the IAEA, are typically needed to achieve acceptable levels of safety. As these more specific standards are generally consistent with the Standards, in complying with them, such more complex installations will also generally comply with the Standards. The Standards are limited to specifying basic requirements of radiation protection and safety, with some guidance on how to apply them. General guidance on applying some of the requirements is available in the publications of the Sponsoring Organizations and additional guidance will be developed as needed in the light of experience gained in the application of the Standards. Tabs

  10. Radiation Safety and Orphan Sources

    International Nuclear Information System (INIS)

    Janzekovic, H.; Krizman, M.

    2006-01-01

    The wide spread use of radioactive and particularly of nuclear materials which started in the last century very quickly also demonstrated negative sides. The external exposure and radiotoxicity of these materials could be easily used in a malevolent act. Due to the fact that these materials could not be detected without special equipment designed for that purpose, severe control over their use in all phases of a life cycle is required. An orphan source is a radioactive source which is not under regulatory control, either because it has never been under regulatory or because it has been abandoned, lost, misplaced, stolen or transferred without proper authorization. In the last ten years a few international conferences were dedicated to the improvement of the safety and security of radioactive sources. Three main tasks are focused, the maintenance of data bases related to events with orphan sources and the publications of such events, the preparation of recommendations and guidelines to national regulatory bodies in order to prevent and detect the events related to orphan sources as well as to develop the response strategies to radiological or nuclear emergency, appraisals of the national strategies of radioactive sources control. Concerning Slovenia, strengthening control over orphan sources in Slovenia started after the adoption of new legislation in 2002. It was carried out through several tasks with the aim to prevent orphan sources, as well as to identify the sources which could be potentially orphan sources. The comprehensive methodology was developed by the Slovenian nuclear safety administration (S.N.S.A.) based on international guidelines as well as on the study of national lesson learned cases. The methodology was developed and used in close cooperation with all parties involved, namely other regulatory authorities, police, customs, agency for radioactive waste management (A.R.A.O.), technical support organisations (T.S.O.), users of source, authorised

  11. Radiation Safety and Orphan Sources

    Energy Technology Data Exchange (ETDEWEB)

    Janzekovic, H.; Krizman, M. [Slovenian Nuclear Safety Administration, Ljubljana (Slovenia)

    2006-07-01

    The wide spread use of radioactive and particularly of nuclear materials which started in the last century very quickly also demonstrated negative sides. The external exposure and radiotoxicity of these materials could be easily used in a malevolent act. Due to the fact that these materials could not be detected without special equipment designed for that purpose, severe control over their use in all phases of a life cycle is required. An orphan source is a radioactive source which is not under regulatory control, either because it has never been under regulatory or because it has been abandoned, lost, misplaced, stolen or transferred without proper authorization. In the last ten years a few international conferences were dedicated to the improvement of the safety and security of radioactive sources. Three main tasks are focused, the maintenance of data bases related to events with orphan sources and the publications of such events, the preparation of recommendations and guidelines to national regulatory bodies in order to prevent and detect the events related to orphan sources as well as to develop the response strategies to radiological or nuclear emergency, appraisals of the national strategies of radioactive sources control. Concerning Slovenia, strengthening control over orphan sources in Slovenia started after the adoption of new legislation in 2002. It was carried out through several tasks with the aim to prevent orphan sources, as well as to identify the sources which could be potentially orphan sources. The comprehensive methodology was developed by the Slovenian nuclear safety administration (S.N.S.A.) based on international guidelines as well as on the study of national lesson learned cases. The methodology was developed and used in close cooperation with all parties involved, namely other regulatory authorities, police, customs, agency for radioactive waste management (A.R.A.O.), technical support organisations (T.S.O.), users of source, authorised

  12. Generic radiation safety design for SSRL synchrotron radiation beamlines

    Energy Technology Data Exchange (ETDEWEB)

    Liu, James C. [Radiation Protection Department, Stanford Linear Accelerator Center (SLAC), MS 48, P.O. Box 20450, Stanford, CA 94309 (United States)]. E-mail: james@slac.stanford.edu; Fasso, Alberto [Radiation Protection Department, Stanford Linear Accelerator Center (SLAC), MS 48, P.O. Box 20450, Stanford, CA 94309 (United States); Khater, Hesham [Radiation Protection Department, Stanford Linear Accelerator Center (SLAC), MS 48, P.O. Box 20450, Stanford, CA 94309 (United States); Prinz, Alyssa [Radiation Protection Department, Stanford Linear Accelerator Center (SLAC), MS 48, P.O. Box 20450, Stanford, CA 94309 (United States); Rokni, Sayed [Radiation Protection Department, Stanford Linear Accelerator Center (SLAC), MS 48, P.O. Box 20450, Stanford, CA 94309 (United States)

    2006-12-15

    To allow for a conservative, simple, uniform, consistent, efficient radiation safety design for all SSRL beamlines, a generic approach has been developed, considering both synchrotron radiation (SR) and gas bremsstrahlung (GB) hazards. To develop the methodology and rules needed for generic beamline design, analytic models, the STAC8 code, and the FLUKA Monte Carlo code were used to pre-calculate sets of curves and tables that can be looked up for each beamline safety design. Conservative beam parameters and standard targets and geometries were used in the calculations. This paper presents the SPEAR3 beamline parameters that were considered in the design, the safety design considerations, and the main pre-calculated results that are needed for generic shielding design. In the end, the rules and practices for generic SSRL beamline design are summarized.

  13. Report on administrative work for radiation safety from April 2006 to March 2007

    Energy Technology Data Exchange (ETDEWEB)

    Komori, Akio; Kaneko, Osamu; Nishimura, Kiyohiko; Uda, Tatsuhiko; Asakura, Yamato; Kawano, Takao; Yamanishi, Hirokuni; Miyake, Hitoshi

    2007-10-15

    The National Institute for Fusion Science (NIFS) is proceeding with the research on magnetic confining nuclear fusion both experimentally and theoretically. During the experiment with deals with very hot plasma, X ray is generated. Therefore the experimental devices with their surroundings are administrated in conformity with the Industrial Safety and Health Law to keep workplace safety. The Radiation Control Safety Office of Safety Hygiene Protection Bureau carries out measuring the radiation dose level regularly, registering the employees who are engaged in plasma experiments, and training them. Non-regulated small sealed sources are used in some detectors. The treating of these sources is controlled by the Safety and Environmental Research Center. This report is on administrative works for radiation safety in the last fiscal year 2006. It includes (1) report on the establishment of radiation safety management system, (2) report on the establishment of training and registration system for radiation workers, and (3) results of radiation dose measurement and monitoring in the radiation controlled area and on the site by using Radiation Monitoring System Applicable to Fusion Experiment (RMSAFE). The report has been published annually. We hope that these reports would be helpful for future safety management in NIFS. (author)

  14. Report on administrative work for radiation safety from April 2006 to March 2007

    International Nuclear Information System (INIS)

    Komori, Akio; Kaneko, Osamu; Nishimura, Kiyohiko; Uda, Tatsuhiko; Asakura, Yamato; Kawano, Takao; Yamanishi, Hirokuni; Miyake, Hitoshi

    2007-10-01

    The National Institute for Fusion Science (NIFS) is proceeding with the research on magnetic confining nuclear fusion both experimentally and theoretically. During the experiment with deals with very hot plasma, X ray is generated. Therefore the experimental devices with their surroundings are administrated in conformity with the Industrial Safety and Health Law to keep workplace safety. The Radiation Control Safety Office of Safety Hygiene Protection Bureau carries out measuring the radiation dose level regularly, registering the employees who are engaged in plasma experiments, and training them. Non-regulated small sealed sources are used in some detectors. The treating of these sources is controlled by the Safety and Environmental Research Center. This report is on administrative works for radiation safety in the last fiscal year 2006. It includes (1) report on the establishment of radiation safety management system, (2) report on the establishment of training and registration system for radiation workers, and (3) results of radiation dose measurement and monitoring in the radiation controlled area and on the site by using Radiation Monitoring System Applicable to Fusion Experiment (RMSAFE). The report has been published annually. We hope that these reports would be helpful for future safety management in NIFS. (author)

  15. Safety training for working youth: Methods used versus methods wanted.

    Science.gov (United States)

    Zierold, Kristina M

    2016-04-07

    Safety training is promoted as a tool to prevent workplace injury; however, little is known about the safety training experiences young workers get on-the-job. Furthermore, nothing is known about what methods they think would be the most helpful for learning about safe work practices. To compare safety training methods teens get on the job to those safety training methods teens think would be the best for learning workplace safety, focusing on age differences. A cross-sectional survey was administered to students in two large high schools in spring 2011. Seventy percent of working youth received safety training. The top training methods that youth reported getting at work were safety videos (42%), safety lectures (25%), and safety posters/signs (22%). In comparison to the safety training methods used, the top methods youth wanted included videos (54%), hands-on (47%), and on-the-job demonstrations (34%). This study demonstrated that there were differences in training methods that youth wanted by age; with older youth seemingly wanting more independent methods of training and younger teens wanting more involvement. Results indicate that youth want methods of safety training that are different from what they are getting on the job. The differences in methods wanted by age may aid in developing training programs appropriate for the developmental level of working youth.

  16. Radiation safety assessment and development of environmental radiation monitoring technology

    CERN Document Server

    Choi, B H; Kim, S G

    2002-01-01

    The Periodic Safety Review(PSR) of the existing nuclear power plants is required every ten years according to the recently revised atomic energy acts. The PSR of Kori unit 1 and Wolsong unit 1 that have been operating more than ten years is ongoing to comply the regulations. This research project started to develop the techniques necessary for the PSR. The project developed the following four techniques at the first stage for the environmental assessment of the existing plants. 1) Establishment of the assessment technology for contamination and accumulation trends of radionuclides, 2) alarm point setting of environmental radiation monitoring system, 3) Development of Radiation Safety Evaluation Factor for Korean NPP, and 4) the evaluation of radiation monitoring system performance and set-up of alarm/warn set point. A dynamic compartment model to derive a relationship between the release rates of gas phase radionuclides and the concentrations in the environmental samples. The model was validated by comparing ...

  17. Study on development of education model and its evaluation system for radiation safety

    CERN Document Server

    Seo, K W; Nam, Y M

    2002-01-01

    As one of the detailed action strategy of multi object preparedness for strengthening of radiation safety management by MOST, this project was performed, in order to promote the safety culture for user and radiation worker through effective education program. For the prevention of radiological accident and effective implementation of radiation safety education and training, this project has been carried out the development of education model and its evaluation system on radiation safety. In the development of new education model, education course was classified; new and old radiation worker, temporary worker, lecturer and manager. The education model includes the contents of expanding the education opportunity and workplace training. In the development of evaluation system, the recognition criteria for commission-education institute and inside-education institute which should establish by law were suggested for evaluation program. The recognition criteria contains classification, student, method, facilities, ...

  18. Safety Training Parks – Cooperative Contribution to Safety and Health Trainings

    DEFF Research Database (Denmark)

    Reiman, Arto; Pedersen, Louise Møller; Väyrynen, Seppo

    2017-01-01

    . The concept of Safety Training Park (STP) has been developed to meet these challenges. Eighty stakeholders from the Finnish construction industry have been involved in the construction and financing of the STP in northern Finland (STPNF). This unique cooperation has contributed to the immediate success......, and evidence from the literature are presented with a focus on the pros and cons of the STPNF. The STP is a new and innovative method for safety training that stimulates different learning styles and inspires changes in individuals’ behavior and in the organizations’ safety climate. The stakeholders’ high...... commitment, a long-term perspective, and a strong safety climate are identified as preconditions for the STP concept to work....

  19. NPP safety and personnel training. XII International conference. Abstracts. Volume 2

    International Nuclear Information System (INIS)

    2011-01-01

    The XII International conference NPP Safety and Personnel Training took place in Obninsk, October 4-7 2011. The problems of personnel training for nuclear industry are discussed. The innovation nuclear systems and fuel cycle are considered. The much attention has been given to NPP radiation safety and radioecology issues. The recent high-speed computation and simulation methods used in reactor technology are presented [ru

  20. Radiation Protection and Safety infrastructure in Albania

    International Nuclear Information System (INIS)

    Ylli, F.; Dollani, K.; Paci, R.

    2005-01-01

    On 1995 Albania Parliament approved the Radiation Protection Act, which established the Radiation Protection Commission as Regulatory Body and Radiation Protection Office as an executive office. The licensing of private and public companies is a duty of RPC and the inspections, enforcement, import - export control, safety and security of radioactive materials, are tasks of RPO. Regulations on licence and inspection, safe handling of radioactive sources, radioactive waste management and transport of radioactive materials have been approved. The Codes of practice in diagnostic radiology, radiotherapy and nuclear medicine have been prepared. Institute of Nuclear Physics carry out monitoring of personal dosimetry, response to the radiological emergencies, calibration of dosimetric equipment's, management of radioactive waste, etc. Based in the IAEA documents, a new Radiation Protection Act is under preparation

  1. Progress report: 1996 Radiation Safety Systems Division

    International Nuclear Information System (INIS)

    Bhagwat, A.M.; Sharma, D.N.; Abani, M.C.; Mehta, S.K.

    1997-01-01

    The activities of Radiation Safety Systems Division include (i) development of specialised monitoring systems and radiation safety information network, (ii) radiation hazards control at the nuclear fuel cycle facilities, the radioisotope programmes at Bhabha Atomic Research Centre (BARC) and for the accelerators programme at BARC and Centre for Advanced Technology (CAT), Indore. The systems on which development and upgradation work was carried out during the year included aerial gamma spectrometer, automated environment monitor using railway network, radioisotope package monitor and air monitors for tritium and alpha active aerosols. Other R and D efforts at the division included assessment of risk for radiation exposures and evaluation of ICRP 60 recommendations in the Indian context, shielding evaluation and dosimetry for the new upcoming accelerator facilities and solid state nuclear track detector techniques for neutron measurements. The expertise of the divisional members was provided for 36 safety committees of BARC and Atomic Energy Regulatory Board (AERB). Twenty three publications were brought out during the year 1996. (author)

  2. Radiation protection and safety of radiation sources international basic safety standards

    CERN Document Server

    International Atomic Energy Agency. Vienna

    2014-01-01

    The Board of Governors of the IAEA first approved Basic Safety Standards in June 1962; they were published by the IAEA as IAEA Safety Series No. 9. A revised edition was issued in 1967. A third revision was published by the IAEA as the 1982 Edition of IAEA Safety Series No. 9 ; this edition was jointly sponsored by the IAEA, ILO, OECD/NEA and the WHO. The next edition was International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources, published by the IAEA as IAEA Safety Series No. 115 in February 1996, and jointly sponsored by the FAO, IAEA, ILO, OECD/NEA, PAHO and the WHO.

  3. Basic Safety Standards for Radiation Protection

    International Nuclear Information System (INIS)

    1962-01-01

    Pursuant to the provisions of its Statute relevant to the adoption and application of safety standards for protection against radiation, the Agency convened a panel of experts which formulated the Basic Safety Standards set forth in this publication. The panel met under the chairmanship of Professor L. Bugnard, Director of the French Institut National d'Hygiene, and representatives of the United Nations and of several of its specialized agencies participated in its work. The Basic Safety Standards thus represent the result of a most careful assessment of the variety of complex scientific and administrative problems involved. Nevertheless, of course, they will need to be revised from time to time in the light of advances in scientific knowledge, of comments received from Member States and of the work of other competent international organizations. The Agency's Board of Governors in June 1962 approved the Standards as a first edition, subject to later revision as mentioned above, and authorized Director General Sigvard Eklund to apply the Standards in Agency and Agency-assisted operations and to invite Governments of Member States to take them as a basis in formulating national regulations or recommendations on protection against the dangers arising from ionizing radiations. It is mainly for this last purpose that the Basic Safety Standards are now being published in the Safety Series; but it is hoped that this publication will also interest a much wider circle of readers.

  4. Radiation safety considerations and compliance within equine veterinary clinics: Results of an Australian survey

    International Nuclear Information System (INIS)

    Surjan, Y.; Ostwald, P.; Milross, C.; Warren-Forward, H.

    2015-01-01

    Objective: To examine current knowledge and the level of compliance of radiation safety principles in equine veterinary clinics within Australia. Method: Surveys were sent to equine veterinary surgeons working in Australia. The survey was delivered both online and in hardcopy format; it comprised 49 questions, 15 of these directly related to radiation safety. The participants were asked about their current and previous use of radiation-producing equipment. Information regarding their level of knowledge and application of radiation safety principles and practice standards was collected and analysed. Results: The use of radiation-producing equipment was evident in 94% of responding clinics (a combination of X-ray, CT and/or Nuclear Medicine Cameras). Of those with radiation-producing equipment, 94% indicated that they hold a radiation licence, 78% had never completed a certified radiation safety course and 19% of participants did not use a personal radiation monitor. In 14% of cases, radiation safety manuals or protocols were not available within clinics. Conclusions: The study has shown that knowledge and application of guidelines as provided by the Code of Practice for Radiation Protection in Veterinary Medicine (2009) is poorly adhered to. The importance of compliance with regulatory requirements is pivotal in minimising occupational exposure to ionising radiation in veterinary medicine, thus there is a need for increased education and training in the area. - Highlights: • Application of the Code of Practice for Veterinary Medicine is poorly adhered to. • Majority of veterinary clinics had not completed certified radiation safety course. • One-fifth of participants did not use personal radiation monitoring. • Increased education and training in area of radiation safety and protection required to generate compliance in clinics

  5. Research on crisis communication of nuclear and radiation safety

    International Nuclear Information System (INIS)

    Cao Yali; Zhang Ying

    2013-01-01

    Insufficient public cognition of nuclear and radiation safety and absence of effective method to handle crisis lead to common crisis events of nuclear and radiation safety, which brings about unfavorable impact on the sound development of nuclear energy exploring and application of nuclear technology. This paper, based on crisis communication theory, analyzed the effect of current situation on nuclear and radiation safety crisis, discussed how to handle crisis, and tried to explore the effective strategies for nuclear and radiation safety crisis handling. (authors)

  6. Delivering a radiation protection dividend: systemic capacity-building for the radiation safety profession in Africa

    Directory of Open Access Journals (Sweden)

    Julian Hilton

    2014-12-01

    MiLoRAD, based on extensive experience training radiation safety personnel in the United States.

  7. Radiation protection and safety culture for cyclotron workers

    International Nuclear Information System (INIS)

    Gomaa, M.A.

    1998-01-01

    The main aim of the present study is to review radiation protection and safety culture measures to be applied to cyclotron workers. The radiation protection (measures are based on Basic Safety standards for the protection) of the health of workers and the general public against the dangers arising from ionizing radiation, while the safety culture are based on IAEA publications

  8. The radiation safety self-assessment program of Ontario Hydro

    International Nuclear Information System (INIS)

    Armitage, G.; Chase, W.J.

    1987-01-01

    Ontario Hydro has developed a self-assessment program to ensure that high quality in its radiation safety program is maintained. The self-assessment program has three major components: routine ongoing assessment, accident/incident investigation, and detailed assessments of particular radiation safety subsystems or of the total radiation safety program. The operation of each of these components is described

  9. Radiation safety handbook for ionizing and nonionizing radiation

    International Nuclear Information System (INIS)

    Kincaid, C.B.

    1976-10-01

    The Handbook is directed primarily to users of radiation sources throughout the Food and Drug Administration. Specific precautions regarding the possession and use of radiation sources in meeting the Agency's objectives are an inherent responsibility of all employees. In addition, the increased emphasis on occupational safety and health and the responsibilities placed on the Department by Public Law and Executive Order make it mandatory that all organizational levels and activities conform to the intent of this Handbook. The policies and procedures described in this document apply to all Agency operators and activities and are intended to protect employees and the general public

  10. Nuclear and radiation safety in Mongolia

    International Nuclear Information System (INIS)

    Batjargala, Erdev

    2010-01-01

    The main purpose of the paper is to assess legal environment of Mongolia for development of nuclear and radiation safety and security. The Nuclear Energy Agency, regulatory agency of the Government of Mongolia, was founded in the beginning of 2009. Since then, it has formulated the State Policy for Utilization of Radioactive Minerals and Nuclear Energy and the Nuclear Energy Law, regulatory law of the field. The State Great Khural of Mongolia has enacted these acts. By adopting the State Policy and Nuclear Energy Law, which together imported the international standards for nuclear and radiation safety and security, it is possible to conclude that legal environment has formed in Mongolia to explore and process radioactive minerals and utilize nuclear energy and introduce technologies friendly to human health and environment. (author)

  11. Safety Training: places available in October 2013

    CERN Multimedia

    Isabelle CUSATO, HSE Unit

    2013-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue.   October 2013 (alphabetical order) Habilitation ATEX niveau 1 (ATEX habilitation level 1) 08-OCT-13, 9.00 – 17.30, in French Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (Driving cherry-pickers) 21-OCT-13 to 22-OCT-13, 08.30 – 17.30, in French with handouts in English Ergonomics - Applying ergonomic principles in the workplace 03-OCT-13, 9.00 – 12.00, in English Être TSO au CERN (Being a TSO at CERN) 29-OCT-13 to 31-OCT-13, 9.00 – 17.30, in French Self-Rescue Mask Training 01-OCT-13, 10.30 – 12.30, in French 03-OCT-13, 10.30 – 12.30, in English 04-OCT-13, 8.30 – 10.30, in English 08-OCT-13, 10.30 – 12.30, in French 09-OCT-13, 10.30 – 12.30, in English 15-OCT-13, 10.30 – 12.30, in French 17-OCT-13, 10.30...

  12. Safety Training: places available in May 2013

    CERN Multimedia

    Isabelle CUSATO, HSE Unit

    2013-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue.   May 2013 (alphabetical order) Conduite de chariots élévateurs (driving of forklifts) 06-MAY-13 to 07-MAY-13, 8.30 – 17.30, in French with handouts in English Self Rescue Mask Training 02-MAY-13, 8.30 – 10.00, in English 02-MAY-13, 10.30 – 12.00, in English 07-MAY-13, 8.30 – 10.00, in French 07-MAY-13, 10.30 – 12.00, in English 14-MAY-13, 8.30 – 10.00, in French 14-MAY-13, 10.30 – 12.00, in French 16-MAY-13, 8.30 – 10.00, in English 16-MAY-13, 10.30 – 12.00, in English 21-MAY-13, 8.30 – 10.00, in French 21-MAY-13, 10.30 – 12.00, in French 23-MAY-13, 8.30 – 10.00, in English 23-MAY-13, 10.30 – 12.00, in English 28-MAY-13, 8.30 – 10.00, in French 28-MAY-13, 10.30 – 12.00, in French 30-MAY-1...

  13. Safety Training: places available in February 2013

    CERN Multimedia

    Isabelle CUSATO, HSE Unit

    2013-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue.   February 2013 (alphabetical order) Noise - Understanding the risks 01-FEB-13, 10.00 – 12.30, in French Magnetic Fields 08-FEB-13, 9.00 – 11.30, in French Conduite de plates-formes élévatrices mobiles de personnel (PEMP) – Cherry-picker driving 18-FEB-13 to 19-FEB-13, 8.30 – 17.30, in French Self-Rescue Mask Training 05-FEB-13, 8.30 – 10.00, in French 05-FEB-13, 10.30 – 12.00, in French 12-FEB-13, 8.30 – 10.00, in French 12-FEB-13, 10.30 – 12.00, in French 14-FEB-13, 8.30 – 10.00, en anglais 14-FEB-13, 10.30 – 12.00, en anglais 19-FEB-13, 8.30 – 10.00, in French 19-FEB-13, 10.30 – 12.00, in French 21-FEB-13, 8.30 – 10.00, en anglais 21-FEB-13, 10.30 – 12.00, en anglais 26-FEB-13, 8.30 &ndash...

  14. Safety Training: places available in June

    CERN Multimedia

    GS Department

    2012-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. June 2012 (alphabetical order) Champs magnétiques 08-JUN-12, 09h30 – 12h00, en anglais Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (Cherry-picker training) 11-JUN-12 to 12-JUN-12, 08.00 – 17.00, in French (with possibility to have the handouts in English) Ergonomics - Applying ergonomic principles in the workplace 14-JUN-12, 09.00 – 12.00, in French First Aiders - Basic Course 06-JUN-12 to 07-JUN-12, 08.00 – 17.00, in French (total : 1.5 days) First Aiders - Refresher Course 07-JUN-12, 13.00 – 17.00, in French 12-JUN-12, 08.00 – 12.00, in English 12-JUN-12, 13.00 – 17.00, in English Habilitation ATEX niveau 2 (ATEX certification –  level 2) 07-JUN-12 to 08-JUN-12, 9.00 – 17.30, in French Habilitation &eacut...

  15. Safety Training: places available in March

    CERN Multimedia

    HSE Unit

    2012-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. MARCH 2012 (alphabetical order, titles of courses in the original language) Echafaudages, réception et conformité (Scaffolding, reception and conformity): From 29-FEB-12 to 02-MAR-12, 09.00 – 17.30, in French (in Domarin, dept. 38) Laser Users : 09-MAR-12, 09.00 – 12.30, in English Self-Rescue Mask training : 08-MAR-12, 08.30 – 10.00, in French 08-MAR-12, 10.30 – 12.00, in English 13-MAR-12, 08.30 – 10.00, in French 13-MAR-12, 10.30 – 12.00, in English 20-MAR-12, 08.30 – 10.00, in French 20-MAR-12, 10.30 – 12.00, in English 22-MAR-12, 08.30 – 10.00, in French 22-MAR-12, 10.30 – 12.00, , in English 27-MAR-12, 08.30 – 10.00, in French 27-MAR-12, 10.30 – 12.00, in English Habilitation électrique pour Electriciens en b...

  16. Safety Training: places available in January 2013

    CERN Document Server

    Isabelle CUSATO, HSE Unit

    2012-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue.   January 2013 (alphabetical order) Ergonomics - Applying ergonomic principles in the workplace 24-JAN-13 to 24-JAN-13, 9:00 – 12:00, in English Etre TSO au CERN 23-JAN-13 to 25-JAN-13, 9:00 – 17:30, in French Self-Rescue Mask training 08-JAN-13 to 08-JAN-13, 8:30 – 10:00, in French 08-JAN-13 to 08-JAN-13, 10:30 – 12:00, in French 10-JAN-13 to 10-JAN-13, 8:30 – 10:00, in English 10-JAN-13 to 10-JAN-13, 10:30 – 12:00, in English 15-JAN-13 to 15-JAN-13, 8:30 – 10:00, in French 15-JAN-13 to 15-JAN-13, 10:30 – 12:00, in French 17-JAN-13 to 17-JAN-13, 8:30 – 10:00, in English 17-JAN-13 to 17-JAN-13, 10:30 – 12:00, in English 22-JAN-13 to 22-JAN-13, 8:30 – 10:00, in French 22-JAN-13 to 22-JAN-13, 10:30 – 12:00, in French 24-JAN-13 to 24-JAN-13,...

  17. 29 CFR 1926.21 - Safety training and education.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Safety training and education. 1926.21 Section 1926.21... Provisions § 1926.21 Safety training and education. (a) General requirements. The Secretary shall, pursuant to section 107(f) of the Act, establish and supervise programs for the education and training of...

  18. Radiation safety and protection on the nuclear power plants

    International Nuclear Information System (INIS)

    Nosovskij, A.V.; Bogorad, V.I.; Vasil'chenko, V.N.; Klyuchnikov, A.A.; Litvinskaya, T.V.; Slepchenko, A.Yu.

    2008-01-01

    The main issues of the radiation safety and protection provision on the nuclear power plants are considered in this monograph. The description of the basic sources of the radiation danger on NPPs, the principles, the methods and the means of the safety and radiation monitoring provision are shown. The special attention is paid to the issues of the ionizing radiation regulation

  19. Safety Training: places available in April 2014

    CERN Multimedia

    Safety Training team, HSE Unit

    2014-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here).   April 2014 (alphabetical order) ATEX Habilitation - Level 2 03-APR-14 to 04-APR-14, 9.00 – 17.30, in French Cryogenic Safety - Level 1 10-APR-14, 10.00 – 12.00, in English Electrical Palett Truck – Driving 15-APR-14, 8.30 – 12.30, in French (hand-outs in English for non-French-speaking participants) Fire Extinguisher 09-APR-14, 10.30 – 12.00, in French 16-APR-14, 10.30 – 12.00, in English 23-APR-14, 10.30 – 12.00, in English First Aider - Level 1 – Initial 03-APR-14, 8.30 – 17.30, in French 10-APR-14, 8.30 – 17.30, in English 16-APR-14, 8.30 – 17.30, in English 24-APR-14, 8.30 – 17.30, in English First Aider - Level 1 – Refresher 17-APR-14, 8.30 – 12.30, in English 17-APR-14, 13.30 – 17.30, in...

  20. The European Nuclear Safety Training and Tutoring Institute (ENSTTI). Annex III [Example of Knowledge Management and Training for TSOs

    International Nuclear Information System (INIS)

    2018-01-01

    ENSTTI is an initiative of members of the ETSON. It was created in 2010 to put in place a high quality training mechanism to meet the training needs of experts at nuclear regulatory authorities and TSOs; to ensure the continuous development of qualified experts in this area; and to foster harmonization of technical practices in nuclear safety, nuclear security and radiation protection. This is achieved through the regular provision of vocational training and tutoring exclusively delivered by senior professionals of European TSOs that take into consideration the latest technical developments and is continuously up-dated and improved by applying a systematic approach to training.

  1. Safety Training: places available in July - August 2013

    CERN Multimedia

    Isabelle CUSATO, HSE Unit

    2013-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue.   July - August 2013 (alphabetical order) Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (Cherry-picker training) 01-JUL-13 to 02-JUL-13, 8.30 – 17.30, in French First-Aiders – Basic Course 31-JUL-13, 8.15 – 17.30, in English Habilitation électrique personnel électricien basse tension (electrical habilitation for low voltage) 01-JUL-13 to 03-JUL-13, 9.00 – 17.30, in French (with handouts in English) Pontier-élingueur (Crane training) 03-JUL-13 to 04-JUL-13, 8.30 – 17.30, in French (with handouts in English) Radiological Protection - Controlled Radiation Area - Course A for CERN employees and CERN associates 11-JUL-13, 8.30 – 17.00, in English 11-JUL-13, 8.30 – 17.00, in French 12-JUL-13, 8.30 – 17.00, i...

  2. Safety Training: places available in July - August 2013

    CERN Multimedia

    Isabelle CUSATO, HSE Unit

    2013-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue.   July - August 2013 (alphabetical order) Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (Cherry-picker training) 01-JUL-13 to 02-JUL-13, 8.30 – 17.30, in French First-Aiders – Basic Course 31-JUL-13, 8.15 – 17.30, in English Habilitation électrique personnel électricien basse tension (electrical habilitation for low voltage) 01-JUL-13 to 03-JUL-13, 9.00 – 17.30, in French (with handouts in English) Pontier-élingueur (Crane training) 03-JUL-13 to 04-JUL-13, 8.30 – 17.30, in French (with handouts in English) Radiological Protection - Controlled Radiation Area - Course A for CERN employees and CERN associates 11-JUL-13, 8.30 – 17.00, in English 11-JUL-13, 8.30 – 17.00, in French 12-JUL-13, 8.30 – 17.00, in...

  3. Education and training issues in individual monitoring of ionising radiation

    International Nuclear Information System (INIS)

    Dimitriou, P.; Kamenopoulou, V.

    2011-01-01

    The present article deals with the education and training (E and T) issues of individual monitoring (IM) of ionising radiation, based on the requirements provided by the Basic Safety Standards EURATOM Directive and the European Commission Technical Recommendations for IM of external radiation. The structure and the objectives of E and T programmes addressed to the staff of dosimetry services, in order to allow the recognition and ensure the continuity of expertise are discussed. The necessity for the establishment of a national strategy for building competence in IM through information, education, training and retraining programmes, addressed to the individually monitored personnel is underlined. The train the trainers' concept is recognised as being an important tool for optimising resources and transferring the skills necessary for building competence. The conditions under which an efficient train the trainers' approach can be established are discussed. Examples of curricula concerning the key persons involved in the provision of E and T in occupational radiation protection are also given. (authors)

  4. Romanian Radiation Protection Training Experience in Medical Field

    International Nuclear Information System (INIS)

    Steliana Popescu, F.; Milu, C.; Naghi, E.; Calugareanu, L.; Stroe, F. M.

    2003-01-01

    Studies conducted by the Institute of Public Health Bucharest during the last years emphasised the need of appropriate radioprotection training in the medical field. With the assistance of the International Atomic Energy Agency in Vienna, the Pilot Centre on Clinical Radio pathology in the Institute of Public Health-Bucharest, provided, from 2000 a 7 modular courses (40 hours each), covering the basic topics of ionizing radiation, biological and physical dosimetry, effects of exposure to ionising radiation, radioprotection concepts, planning and medical response in case of a nuclear accident or radiological emergency. The courses are opened for all health specialists, especially for occupational health physicians, focusing on health surveillance of radiation workers and medical management of overexposed workers. Each module is followed up by an examination and credits. The multidisciplinary team of instructors was trained within several train-the-trainers courses, organised by IAEA. The paper discusses the evaluation of these 3 years experience in training and its feedback impact, the aim of the program being to develop a knowledge in the spirit of the new patterns of radiological protection, both for safety and communication with the public. (Author)

  5. In-service training and expertise requirements in radiation protection

    International Nuclear Information System (INIS)

    Klener, V.; Heribanova, A.

    2003-01-01

    Proper selection of staff and their special education and training in radiation protection are important factors when assuring faultless man-machine interaction and thereby a reduced likelihood of human factor failure in hazardous practices. University-level institutions can only provide education in the individual partial segments of the multidisciplinary area of radiation protection, whereas the proper practices are learned by graduate personnel on the job, by performing operational tasks at their particular workplace. The scope o expertise of subjects providing radiation protection surveillance and the requirements for their special education and training are outlined. Supervising persons appointed by the radiation source handling licensee to perform a number of operational tasks at the workplace assume a prominent position. Alternatively, systematic supervision at the workplace can be contracted by the licensee from an external body, provided that the latter has acquired appropriate licence from the State Office for Nuclear Safety. The provisions of the Atomic Act and the related implementing regulations with respect to special training and to the examination of professional competence before an expert commission are briefly outlined. (author)

  6. Training for Radiation Protection in Interventional Radiology

    International Nuclear Information System (INIS)

    Bartal, G.; Sapoval, M.; Ben-Shlomo, A.

    1999-01-01

    Program in radiological equipment has incorporated more powerful x-ray sources into the standard Fluoroscopy and CT systems. Expanding use of interventional procedures carries extensive use of fluoroscopy and CT which are both associated with excessive radiation exposure to the patient and personnel. During cases of Intravenous CT Angiography and direct Intraarterial CT Angiography, one may substitute a substantial number of diagnostic angiography checks. Basic training in interventional radiology hardly includes some of the fundamentals of radiation protection. Radiation Protection in Interventional Radiology must be implemented in daily practice and become an integral part of procedure planning strategy in each and every case. Interventional radiological most master all modern imaging modalities in order to choose the most effective, but least hazardous one. In addition, one must be able to use various imaging techniques (Fluoroscopy, CTA, MM and US) as a stand-alone method, as well as combine two techniques or more. Training programs for fellows: K-based simulation of procedures and radiation protection. Special attention should be taken in the training institutions and a basic training in radiation protection is advised before the trainee is involved in the practical work. Amendment of techniques for balloon and stent deployment with minimal use of fluoroscopy. Attention to the differences between radiation protection in cardiovascular and nonvascular radiology with special measures that must be taken for each one of them (i.e., peripheral angiography vs. stenting, Endo luminal Aortic Stent Graft, or nonvascular procedures such as biliary or endo urological stenting or biliary intervention). A special emphasis should be put on the training techniques of Interventional Radiologists, both beginners and experienced. Patient dose monitoring by maintaining records of fluoroscopic time is better with non-reset timer, but is optional. Lee of automated systems that

  7. Radiation protection, safety and associated problems in industrial radiography

    International Nuclear Information System (INIS)

    Le Roux, P.R.

    1990-01-01

    Industrial radiography is an indispensable tool for non-destructive testing. Its use entails potential radiation exposure to the operator as well as to the public. Since such radiation has the potential to be harmful, there is a need to limit radiation exposure to a level at which the risk is believed to be acceptable to the individual and to society. The Radiation Protection Society and the Department of National Health believe that the level of protection provided for radiation workers should be comparable with that in other 'safe' industries. The total risk for radiation workers includes the risk of non-radiation related accidents in the various occupations, as well as the special risks of radiation exposure. Industrial radiographers have one of the poorest safety records of all non-medical radiation workers. Operator errors and management errors seem to be the primary contributors to most accidental high exposures. It is necessary to remember that industrial radiography has to be carried out in a wide variety of work places under many different working conditions, both by day and by night. High energy end emissivity (X-ray output or source activity) is required for the radiation to be transmitted through specimens, because these are normally constructed of thick and dense materials such as steel. Additionally, most radiographic sources must be portable to permit use in field locations. On the negative side it must be mentioned that studies undertaken abroad conclude that the most important factors contributing to unsafe operations are human related. Careful planning of the method of work is essential if unnecessary risks are to be avoided. The most effective way of reducing accidents would seem to be to train employees to adhere to established and well documented procedures, to exercise common sense and sound judgement, and to use the protective equipment and devices provided in the manner specified. 2 tabs., 3 refs

  8. Operations report 1985 of the Department of Safety and Radiation Protection

    International Nuclear Information System (INIS)

    Hille, R.; Frenkler, K.L.

    1986-04-01

    Under the heading 'Licensing' the report deals with licensing procedures and the handling of nuclear-fuels and radioactive materials. Operational radiation protection is concerned with operational and personnel monitoring, mathematical methods and safety analyses. Environmental protection deals with emission control, immission monitoring and meteorological measurements, and safety technology with α/β-analysis, dosimetry, equipment servicing and mechanics, nuclear material safeguards. Other subdepartments take care of industrial safety, physical protection, emergency protection and training. Subjects dealt with, too, are dispersion pollutants in atmosphere and environment, further development of radiation protection methods, and the bibliography of radiation protection in KFA. (HK) [de

  9. Investigation on regulatory requirements for radiation safety management

    International Nuclear Information System (INIS)

    Han, Eun Ok; Choi, Yoon Seok; Cho, Dae Hyung

    2013-01-01

    NRC recognizes that efficient management of radiation safety plan is an important factor to achieve radiation safety service. In case of Korea, the contents to perform the actual radiation safety management are legally contained in radiation safety management reports based on the Nuclear Safety Act. It is to prioritize the importance of safety regulations in each sector in accordance with the current situation of radiation and radioactive isotopes-used industry and to provide a basis for deriving safety requirements and safety regulations system maintenance by the priority of radiation safety management regulations. It would be helpful to achieve regulations to conform to reality based on international standards if consistent safety requirements is developed for domestic users, national standards and international standards on the basis of the results of questions answered by radiation safety managers, who lead on-site radiation safety management, about the priority of important factors in radioactive sources use, sales, production, moving user companies, to check whether derived configuration requirements for radiation safety management are suitable for domestic status

  10. Innovation research on the safety supervision system of nuclear and radiation safety in Jiangsu province

    International Nuclear Information System (INIS)

    Zhang Qihong; Lu Jigen; Zhang Ping; Wang Wanping; Dai Xia

    2012-01-01

    As the rapid development of nuclear technology, the safety supervision of nuclear and radiation becomes very important. The safety radiation frame system should be constructed, the safety super- vision ability for nuclear and radiation should be improved. How to implement effectively above mission should be a new subject of Provincial environmental protection department. Through investigating the innovation of nuclear and radiation supervision system, innovation of mechanism, innovation of capacity, innovation of informatization and so on, the provincial nuclear and radiation safety supervision model is proposed, and the safety framework of nuclear and radiation in Jiangsu is elementally established in the paper. (authors)

  11. Safety of radiation sources in Slovenia

    International Nuclear Information System (INIS)

    Belicic-Kolsek, A.; Sutej, T.

    2001-01-01

    The Republic of Slovenia, a central European country which has been independent since 1991, has about 2 million inhabitants and an area of 20,256 km 2 . The Constitutional Law on Enforcement of the Basic Constitutional Charter on the Autonomy and Independence of the Republic of Slovenia, adopted on 23 June 1991 (Off. Gaz. of the R of Slovenia No. 1/91), provided that all the laws adopted by the Socialist Federal Republic (SFR) of Yugoslavia should remain in force in the Republic of Slovenia pending the adoption of appropriate legislation by the Slovene Parliament. Under the Slovene Constitution, all international treaties ratified by Slovenia constitute an integral part of Slovenia's legislation and can be applied directly. In Slovenia, all regular types of ionizing radiation source are being used for peaceful purposes and are covered by a system for their safe use and control. All radiation sources and radioactive materials are registered and under regulatory control. Inspections are carried out periodically by the Health Inspectorate of the Republic of Slovenia (HIRS) and, in the case of nuclear installations, the Slovene Nuclear Safety Administration (SNSA). Technical checks on radiation sources are carried out periodically by technical support organizations: the Jozef Stefan Institute and the Institute for Occupational Safety (IOS). (author)

  12. Nuclear and radiation safety in Kazakhstan

    International Nuclear Information System (INIS)

    Kim, A.A.

    2001-01-01

    Major factors by which the radiation situation in Kazakhstan is formed are: enterprises of nuclear fuel cycle, including uranium mining and milling activity and geological exploration of uranium; nuclear power plant and research reactors; residues of atmospheric and underground nuclear explosions, which were conducted for military and peaceful purposes at different test sites; mining and milling of commercial minerals accompanied by radioactive substances; use of radioactive sources in industry, medicine, agriculture and scientific research. Since 1991, after getting sovereignty, creation was started of an own legislative basis of the country for the field of atomic energy use. It includes laws, regulations and standards for nuclear and radiation safety of nuclear installations, personnel, involved in the activity with using of atomic energy, population and environment. An applicable system of state regulation in this area (including a central regulatory body in the field of atomic energy use) and various ministries, agencies and committees, was created. As a result of these reforms, regulatory activities were improved in the country. This paper presents the current matters of nuclear and radiation safety in Kazakhstan and some difficulties which Kazakhstan encountered during the transition to an independent state. (author)

  13. Inter-comparison of safety culture within selected practices in Ghana utilising ionising radiation

    International Nuclear Information System (INIS)

    Faanu, A.; Schandorf, C.; Darko, E. O.; Boadu, M.; Emi-Reynolds, G.; Awudu, A. R.; Gyekye, P. K.; Kpeglo, D. O.

    2010-01-01

    The safety culture of selected practices and facilities in Ghana utilising radiation sources or radiation emitting devices has been assessed using a performance indicator, which provided status information on management and operating staff commitment to safety. The questionnaire was based on the following broad areas: general safety considerations, safety policy at the facility level, safety practices at the facility level, definition of responsibility, staff training, safety of the physical structure of the facility and the emergency plans. The analysis showed that the percentage levels of commitment to safety for the respective practices are as follows: conventional radiography, 23.3-90.0%; research reactor, 73.3 %; gamma irradiation facility, 53.3%; radiotherapy, 76.7%; X-ray scanner, 80.0%; gamma scanner, 76.7%; industrial radiography 86.7% and nuclear density practice, 78%. None of the practices or facilities was able to satisfy all the requirements that will ensure a 100% level of safety culture. (authors)

  14. Safety Training - places available in October

    CERN Multimedia

    Isabelle CUSATO, HSE Unit

    2012-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. October 2012 (alphabetical order) Conduite de plates-formes élévatrices mobiles de personnel (PEMP) – Cherry-picker driving 08-OCT-12 to 09-OCT-12, 9.00 – 17.30, in French 11-OCT-12 to 12-OCT-12, 9.00 – 17.30, in French 17-OCT-12 to 18-OCT-12, 9.00 – 17.30, in French 29-OCT-12 to 30-OCT-12, 9.00 – 17.30, in French With the possibility to have the handouts in English Echafaudages - Réception, conformité (Scaffolding - reception, conformity) 24-OCT-12 to 26-OCT-12, 8.30 – 17.30, in French (location: Domarin, French department 38) First Aiders - Basic Course 04-OCT-12, 8.30 – 17.30, in English Habilitation électrique personnel non électricien (non electricians) 03-OCT-12 to 04-OCT-12, 9.00 – 17.30 (total 1.5 day), in English...

  15. Safety Training: places available in March 2013

    CERN Multimedia

    Isabelle Cusato, HSE Unit

    2013-01-01

    There are places available in the forthcoming Safety courses. For updates and registration, please refer to the Safety Training Catalogue.   March 2013 (alphabetical order) Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (cherry-picker driving) 18-MAR-13 to 19-MAR-13, 8.30 – 17.30, in French with handouts in English First-Aiders – Basic course 14-MAR-13, 8.15 – 17.30, in French 21-MAR-13, 8.15 – 17.30, in English 28-MAR-13, 8.15 – 17.30, in French Habilitation électrique personnel électricien basse et haute tension (habilitation électrique for electricians in low and high voltage) 11-MAR-13 to 22-MAR-13 (total hours : 32), 9.00 – 17.30, in English Habilitation électrique personnel non électricien (electrical habilitation for non electricians) 27-MAR-13 to 28-MAR-13, 9.00 – 17.30, in French Habilitation électrique perso...

  16. Safety Training: places available in April 2013

    CERN Multimedia

    Isabelle CUSATO, HSE Unit

    2013-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue.   April 2013 (alphabetical order) Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (cherry-picker driving) 15-APR-13 to 16-APR-13, 8.30 – 17.30, in French, with handouts in English Être TSO au CERN 09-APR-13 to 11-APR-13, 9.00 – 17.30, in French First-Aiders – Basic Course 18-APR-13, 8.15 – 17.30, in French First-Aiders – Refresher Course 04-APR-13, 8.15 – 12.30, in French 04-APR-13, 13.15 – 17.30, in French Habilitation ATEX niveau 2 (ATEX habilitation level 2) 11-APR-13 to 12-APR-13, 9.00 – 17.30, in French Habilitation électrique personnel électricien basse tension (electricial habilitation for electricians in low voltage) 08-APR-13 to 10-APR-13, 9.00 – 17.30, in French Habilitation &eac...

  17. Safety Training: places available in February 2014

    CERN Multimedia

    The Safety Training Team, HSE Unit

    2014-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here).   February 2014 (alphabetical order) ATEX Habilitation - Level 1 04-FEB-14, 9.00 – 17.30, in French Electrical Work - Lock-out 05-FEB-14, 13.30 – 17.30, in French Ergonomics – Office 06-FEB-14, 9.00 – 12.00, in English Fire Extinguisher 26-FEB-14, 10.30 – 12.00, in French 05-FEB-14, 10.30 – 12.00, in English First Aider - Level 1 – Initial 20-FEB-14, 8.30 – 17.30, in French First Aider - Refresher 06-FEB-14, 8.30 – 12.30, in French 06-FEB-14, 13.30 – 17.30, in French 13-FEB-14, 8.30 – 12.30, in English 13-FEB-14, 13.30 – 17.30, in English Habilitation électrique - Electrician Low Voltage – Initial 10-FEB-14 to 12-FEB-14, 9.00 – 17.30, in French Habilitation électrique - Electrician ...

  18. Safety Training: places available in September 2013

    CERN Document Server

    Isabelle Cusato, HSE Unit

    2013-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. September 2013 (alphabetical order) Conduite de plates-formes élévatrices mobiles de personnel (PEMP) (Cherry-picker driving) 12-SEP-13 au 13-SEP-13, 8.30 – 17.30, in French with handouts in English Ergonomics - Applying ergonomic principles in the workplace 19-SEP-13, 9.00 – 12.00, in French Être TSO au CERN (Being TSO at CERN) 10-SEP-13 to 12-SEP-13, 8.30 – 17.30, in French Habilitation ATEX - niveau 2 (ATEX habilitation - level 2) 19-SEP-13 to 20-SEP-13, 9.00 – 17.30, in French Habilitation électrique personnel électricien basse tension (electrical habilitation for electricians in low voltage) 11-SEP-13 to 13-SEP-13, 9.00 – 17.30, in English 23-SEP-13 to 25-SEP-13, 9.00 – 17.30, in French Habilitation électrique personnel non &eacut...

  19. Safety Training: places available in June 2013

    CERN Multimedia

    Isabelle CUSATO, HSE Unit

    2013-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue.   June 2013 (alphabetical order) First Aiders - Basic Course 13-JUN-13, 8.15 – 17.30, in English First Aiders - Refresher Course 06-JUN-13, 8.15 – 12.30, in French 06-JUN-13, 13.15 – 17.30, in French Habilitation ATEX niveau 1 (Habilitation ATEX level 1) 28-JUN-13, 9.00 – 17.30, in French Habilitation électrique personnel électricien basse et haute tensions (habilitation électrique for electricians in low and high voltage) 10-JUN-13 to 13-JUN-13, 9.00 – 17.30, in English Habilitation électrique personnel non électricien (habilitation électrique for non electricians) 03-JUN-13 (afternoon) to 04-JUN-13 (full day), 9.00 – 17.30, in English Laser Experts 03-JUN-13 to 04-JUN-13, 9.00 – 17.30, in English Laser Users 28-JUN-...

  20. Safety Training: places available in February

    CERN Multimedia

    DGS Unit

    2012-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. FEBRUARY 2012 (alphabetical order) Conduite de Plates-Formes Elevatrices Mobiles de Personnel (PEMP) / Cherry-picker driving : 09-FEB-12 au 10-FEB-12, 08.00 – 17.30, in French (with possibility to have handouts in English) Magnetic Fields : 03-FEB-12, 9.30 – 12.00, in French Self-rescue mask : 02-FEB-12, 8.30 – 10.00, in French 02-FEB-12, 10.30 – 12.00, in English 07-FEB-12, 8.30 – 10.00, in French 07-FEB-12, 10.30 – 12.00, in English 14-FEB-12, 8.30 – 10.00, in French 14-FEB-12, 10.30 – 12.00, in English 16-FEB-12, 8.30 – 10.00, in French 16-FEB-12, 10.30 – 12.00, in English 21-FEB-12, 8.30 – 10.00, in French 21-FEB-12, 10.30 – 12.00, in English 28-FEB-12, 8.30 – 10.00, in French 28-FEB-12, 10.30 – 12.00, in English Radiologic...

  1. Safety Training: places available in April

    CERN Multimedia

    2012-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue. April 2012 (alphabetical order) Noise - Understanding the risks 18-APR-12, 10.00 – 12.30, in French Conduite de chariots élévateurs / Driving of forklifts 23-APR-12 to 24-APR-12, 09.00 – 17.30, in French (with possibility to have the handouts in English) First-aiders – Basic course 23-APR-12 to 24-APR-12, 08.30 – 17.30 and 08.30 – 12.30 (total: one day and a half), in French First Aiders - Refresher Course 24-APR-12, 13.30 – 17.30, in French Habilitation électrique personnel non électricien / Habilitation électrique for non electricians 02-APR-12 to 03-APR-12, 09.00 – 17.30 and 09.00 – 12.30 (total: one day and a half), in French Manipulation d’extincteurs : exercices sur feux réels / Use of fire extinguisher ...

  2. Safety Training: places available in January 2014

    CERN Multimedia

    Safety Training Team, HSE Unit

    2014-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here).   January 2014 (alphabetical order) Confined space 28-JAN-14, 9.00 – 17.30, in French Ergonomics – Office 30-JAN-14, 9.00 – 12.00, in French Fire Extinguisher 08-JAN-14, 10.30 – 12.00, in French 24-JAN-14, 10.30 – 12.00, in English 31-JAN-14, 10.30 – 12.00, in French First Aider - Level 1 – Initial 16-JAN-14, 8.30 – 17.30, in French 30-JAN-14, 8.30 – 17.30, in French First Aider – Refresher 09-JAN-14, 8.30 – 12.30, in French 09-JAN-14, 13.30 – 17.30, in French Habilitation électrique - Electrician Low Voltage - Initial 22-JAN-14 au 24-JAN-14, 9.00 – 17.30, in English Habilitation électrique - Electrician Low and High Voltage - Initial 28-JAN-14 au 31-JAN-14, 9.00 – 17.30, in French ...

  3. Safety Training: places available in January 2014

    CERN Document Server

    Safety Training Team, HSE Unit

    2013-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here).   January 2014 (alphabetical order) Confined space 28-JAN-14, 9.00 – 17.30, in French Ergonomics – Office 30-JAN-14, 9.00 – 12.00, in French Fire Extinguisher 08-JAN-14, 10.30 – 12.00, in French 24-JAN-14, 10.30 – 12.00, in English 31-JAN-14, 10.30 – 12.00, in French First Aider - Level 1 – Initial 16-JAN-14, 8.30 – 17.30, in French 30-JAN-14, 8.30 – 17.30, in French First Aider – Refresher 09-JAN-14, 8.30 – 12.30, in French 09-JAN-14, 13.30 – 17.30, in French Habilitation électrique - Electrician Low Voltage - Initial 22-JAN-14 au 24-JAN-14, 9.00 – 17.30, in English Habilitation électrique - Electrician Low and High Voltage - Initial 28-JAN-14 au 31-JAN-14, 9.00 – 17.30, in French ...

  4. Safety Training: places available in March 2014

    CERN Multimedia

    Safety Training team, HSE Unit

    2014-01-01

    There are places available in the forthcoming Safety courses. For updates and registrations, please refer to the Safety Training Catalogue (see here).   March 2014 (alphabetical order) Ergonomics - Worksite and Workshop 24-MAR-14, 9.00 – 17.30, in French Fire Extinguisher 05-MAR-14, 10.30 – 12.00, in French 12-MAR-14, 8.30 – 10.00, in English 12-MAR-14, 10.30 – 12.00, in English First Aider - Level 1 – Initial 27-MAR-14, 8.30 – 17.30, in English First Aider – Refresher 20-MAR-14, 8.30 – 12.30, in French 20-MAR-14, 13.30 – 17.30, in French Habilitation électrique - Electrician Low Voltage – Initial 17-MAR-14 to 19-MAR-14, 9.00 – 17.30, in French 24-MAR-14 to 26-MAR-14, 9.00 – 17.30, in English Habilitation électrique - Electrician Low and High Voltage – Initial 18-MAR-14 to 21-MAR-14, 9.00 – 17.30, in English Habilitation &eacut...

  5. Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards. General Safety Requirements. Pt. 3 (Chinese Edition)

    International Nuclear Information System (INIS)

    2014-01-01

    This publication is the new edition of the International Basic Safety Standards. The edition is co-sponsored by seven other international organizations — European Commission (EC/Euratom), FAO, ILO, OECD/NEA, PAHO, UNEP and WHO. It replaces the interim edition that was published in November 2011 and the previous edition of the International Basic Safety Standards which was published in 1996. It has been extensively revised and updated to take account of the latest finding of the United Nations Scientific Committee on the Effects of Atomic Radiation, and the latest recommendations of the International Commission on Radiological Protection. The publication details the requirements for the protection of people and the environment from harmful effects of ionizing radiation and for the safety of radiation sources. All circumstances of radiation exposure are considered

  6. Radiation protection and safety of radiation sources: International basic safety standards. General safety requirements. Pt. 3 (French Edition)

    International Nuclear Information System (INIS)

    2016-01-01

    This publication is the new edition of the International Basic Safety Standards. The edition is co-sponsored by seven other international organizations — European Commission (EC/Euratom), FAO, ILO, OECD/NEA, PAHO, UNEP and WHO. It replaces the interim edition that was published in November 2011 and the previous edition of the International Basic Safety Standards which was published in 1996. It has been extensively revised and updated to take account of the latest finding of the United Nations Scientific Committee on the Effects of Atomic Radiation, and the latest recommendations of the International Commission on Radiological Protection. The publication details the requirements for the protection of people and the environment from harmful effects of ionizing radiation and for the safety of radiation sources. All circumstances of radiation exposure are considered

  7. Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards. General Safety Requirements. Pt. 3 (Arabic Edition)

    International Nuclear Information System (INIS)

    2015-01-01

    This publication is the new edition of the International Basic Safety Standards. The edition is co-sponsored by seven other international organizations — European Commission (EC/Euratom), FAO, ILO, OECD/NEA, PAHO, UNEP and WHO. It replaces the interim edition that was published in November 2011 and the previous edition of the International Basic Safety Standards which was published in 1996. It has been extensively revised and updated to take account of the latest finding of the United Nations Scientific Committee on the Effects of Atomic Radiation, and the latest recommendations of the International Commission on Radiological Protection. The publication details the requirements for the protection of people and the environment from harmful effects of ionizing radiation and for the safety of radiation sources. All circumstances of radiation exposure are considered

  8. EMERALD - Vocational training in medical radiation physics

    International Nuclear Information System (INIS)

    Lewis, C.A.; Tabakov, S.D.; Roberts, V.C.

    2000-01-01

    EMERALD (European MEdiation RAdiation Learning Development) is a project funded by the European Union under the Leonardo da Vinci programme. It involves a collaboration between Universities and Hospitals from the UK, Sweden, Italy and Portugal. The aim of the EMERALD project is to develop and deliver three common transnational vocational training modules in Medical Radiation Physics in the specific areas of Diagnostic Radiology, Nuclear Medicine and Radiotherapy. These modules are intended to be used in the training programme for young professionals involved in medical radiation physics. Each module is developed from a series of competencies. The competencies are acquired by undertaking practical tasks described in a workbook given to each trainee. Once the task has been completed the trainee discusses the results and observations with his supervisor to ensure that the appropriate competency has been achieved. In addition to the workbook, each trainee receives a CD-ROM containing a series of images to help describe each task. The workbooks for each subject area have been completed and students from Sweden have undertaken Diagnostic Radiology training in the United Kingdom using this approach. The project is now entering the next phase; to develop a multimedia version of the workbook. (author)

  9. Use of a web site to enhance criticality safety training

    International Nuclear Information System (INIS)

    Huang, Song T.; Morman, James A.

    2003-01-01

    Establishment of the NCSP (Nuclear Criticality Safety Program) website represents one attempt by the NCS (Nuclear Criticality Safety) community to meet the need to enhance communication and disseminate NCS information to a wider audience. With the aging work force in this important technical field, there is a common recognition of the need to capture the corporate knowledge of these people and provide an easily accessible, web-based training opportunity to those people just entering the field of criticality safety. A multimedia-based site can provide a wide range of possibilities for criticality safety training. Training modules could range from simple text-based material, similar to the NCSET (Nuclear Criticality Safety Engineer Training) modules, to interactive web-based training classes, to video lecture series. For example, the Los Alamos National Laboratory video series of interviews with pioneers of criticality safety could easily be incorporated into training modules. Obviously, the development of such a program depends largely upon the need and participation of experts who share the same vision and enthusiasm of training the next generation of criticality safety engineers. The NCSP website is just one example of the potential benefits that web-based training can offer. You are encouraged to browse the NCSP website at http://ncsp.llnl.gov. We solicit your ideas in the training of future NCS engineers and welcome your participation with us in developing future multimedia training modules. (author)

  10. Communication on radiation safety: ability and sensibility

    International Nuclear Information System (INIS)

    Rozental, Jose de Julio; Ministry of Environment

    2001-01-01

    Nuclear Communication Issues today, combine aspects of nuclear science, public approach and psychological subjects. The principal objectives are to systematize nuclear public information and to prepare researchers or communicators in a position to comment on the nuclear issues of our stage. The programme should focused on progress of nuclear energy, public perception of risk, conflicts among scientists, as the radiation effect at low doses, and how nuclear industry and scientists may better communicate information concerning the potential for hazard to property, health and the environment. There will be occasions where the competent authority should have formal link with other organizations, as in case of abnormal situation or emergency. Particular attention should be paid to the exchange of distinct parts in order to avoid misinterpretation or mistakes when divulging information to the public.Communication is emphasized in the IAEA Basic Safety Standards, [1] as well as, the current approach created to enlarge the relationship between man, practices and protection by the encouragement of a better understanding and implementation of the Safety Culture concept. The application of this concept involves better protection on Radiation Safety to workers, public and environment not only reducing accidents, but also avoiding unnecessary stresses and strains due to intensified operations. This means an advance towards the humanization of practices, equally observed by industrialized and developing countries. Finally, this paper also comment about two very important lessons that there were not yet learned as in reality necessary, considering the goals for a competent Nuclear Communication: the psychological effects of Chernobyl accident in April 1986 resulted from the lack of public information; the psychological effects of the Radiological Accident in Goiania resulted from the misunderstanding of the basic concept of ionizing radiation, which was translated into fear and

  11. Surgical Safety Training of World Health Organization Initiatives.

    Science.gov (United States)

    Davis, Christopher R; Bates, Anthony S; Toll, Edward C; Cole, Matthew; Smith, Frank C T; Stark, Michael

    2014-01-01

    Undergraduate training in surgical safety is essential to maximize patient safety. This national review quantified undergraduate surgical safety training. Training of 2 international safety initiatives was quantified: (1) World Health Organization (WHO) "Guidelines for Safe Surgery" and (2) Department of Health (DoH) "Principles of the Productive Operating Theatre." Also, 13 additional safety skills were quantified. Data were analyzed using Mann-Whitney U tests. In all, 23 universities entered the study (71.9% response). Safety skills from WHO and DoH documents were formally taught in 4 UK medical schools (17.4%). Individual components of the documents were taught more frequently (47.6%). Half (50.9%) of the additional safety skills identified were taught. Surgical societies supplemented safety training, although the total amount of training provided was less than that in university curricula (P < .0001). Surgical safety training is inadequate in UK medical schools. To protect patients and maximize safety, a national undergraduate safety curriculum is recommended. © 2013 by the American College of Medical Quality.

  12. Radiation protection training award - an innovative approach of testing radiation protection skills in catastrophe management

    International Nuclear Information System (INIS)

    Geringer, T.

    2003-01-01

    own emergency planning. ARCS Bronze award consists of 4 practical exercises followed by a theoretical test. The praxis requirements include the detection and identification of a radioactive source, application of a low level gamma monitor, principles of personnel monitoring, control of external hazard as well as taking environmental samples. Theoretical testing ranges from the nature of radioactivity and radiation units to the legislation related to radiological protection. Evaluation is given in an objective numeric grading. The Silver award includes the treatment of nuclear emergencies such as the detonation of a nuclear weapon, an accident in a radionuclid/ isotop lab or an accident in a nuclear plant. The candidates have also to present their skills in handling an transportation accident, arranging immediate catastrophe management. The candidates' background ranged from security force members to academics. The problem of harmonized training standards is, especially since the September 11 th attacks, a worldwide need. Security forces have to show their practical knowledge and secure their theoretical background to eventually update their skills. The protection of the general population can only be ensured by a homogenous training as well as perfect collaboration of the security units. Therefore an intensive training of the security guards performed by specialists must be guaranteed. ARCS radiation protection awards can be seen as the motivational background to this approach. Also the social component must not be neglected since the period of training at ARCS offers a perfect environment for interdisciplinary discussion. Safety culture and training experiences in the field of radiation protection in Austria depend an such an information system and ARCS has shown experience in that field for decades. Innovative approaches in training and sharing information as well as experience are seen as important tools to maintain safety culture. Harmonization and national

  13. Education and training in radiation protection in Korea: Current status and improvements

    Energy Technology Data Exchange (ETDEWEB)

    Son, Mi Yeon; Kim; Hyun Kee; Nam, Young Mi; Nam, Jong Soo; Lee, Ki Bog [Nuclear Training and Education Center, Korea Atomic Energy Research Institute, Daejeon(Korea, Republic of)

    2012-10-15

    Radiation and its various industrial applications have been growing at approximately 10 percent per year for the past decade in Korea. As a result, the importance of the Education and Training (E and T) in radiation protection is of upmost importance. This paper is intended to investigate the present status of the E and T on radiation protection and safety in Korea and to draw up the improvements of the E and T courses required for building the national radiation safety infrastructure. For these purposes, the E and T data from the six major domestic organizations providing radiation protection training courses were investigated and analyzed. Each of the organizations is offering several kinds of E and T courses based on their own specific functions. These organizations have administrative facilities equipped with the latest technology for E and T in radiation protection. The E and T courses mainly cover the training courses for radiation workers, radiological emergency staff, license applicants, license holders, and regulatory staff. In 2010, a total of 58 E and T courses were carried out across six organizations. The conclusions make a number of observations highlighting challenges such as: establishing a formal feedback mechanism, introducing more practical training sessions, developing training courses tailored to the job categories and target audiences, and designing education and training courses in radiation protection that comply with current obligations as well as future requirements.

  14. Education and training in radiation protection in Korea: Current status and improvements

    International Nuclear Information System (INIS)

    Son, Mi Yeon; Kim; Hyun Kee; Nam, Young Mi; Nam, Jong Soo; Lee, Ki Bog

    2012-01-01

    Radiation and its various industrial applications have been growing at approximately 10 percent per year for the past decade in Korea. As a result, the importance of the Education and Training (E and T) in radiation protection is of upmost importance. This paper is intended to investigate the present status of the E and T on radiation protection and safety in Korea and to draw up the improvements of the E and T courses required for building the national radiation safety infrastructure. For these purposes, the E and T data from the six major domestic organizations providing radiation protection training courses were investigated and analyzed. Each of the organizations is offering several kinds of E and T courses based on their own specific functions. These organizations have administrative facilities equipped with the latest technology for E and T in radiation protection. The E and T courses mainly cover the training courses for radiation workers, radiological emergency staff, license applicants, license holders, and regulatory staff. In 2010, a total of 58 E and T courses were carried out across six organizations. The conclusions make a number of observations highlighting challenges such as: establishing a formal feedback mechanism, introducing more practical training sessions, developing training courses tailored to the job categories and target audiences, and designing education and training courses in radiation protection that comply with current obligations as well as future requirements.

  15. Web Technologies in Radiation Protection Training

    International Nuclear Information System (INIS)

    Marco Arboli, M.; Hernando Velasco, E.; Rodriguez Suarez, M; Gomez Ros, J. M.; Rodriguez, M.; Villaroel, R.

    2004-01-01

    This paper presents the major advances already done in the educational web site maintained on the CIEMAT server and accessible through the CSN web. This training project attempts to propose the use of a web site as the standardisation of radiation protection training programmes. The main objective of this project is to provide training material for course organisers, trainers and professionals, and to promote the exchange of expertise between workers involved in all activities using radiation sources. The web site is being developed to provide educational material based on a modular design and in Spanish. We present the initial results of this useful tool for practitioners. The user can choose to obtain the information included in the web site by downloading the complete course or by obtaining the individual modules stepwise. Task in each of the training modules has been designed to develop specific competence taking into account different target groups. Complete materials for trainers and trainees will be available in the web site, to ease courses performance. The project also aims to obtain necessary standardisation of the Rp knowledge provided to workers. (Author) 12 refs

  16. Safety guide data on radiation shielding in a reprocessing facility

    International Nuclear Information System (INIS)

    Sekiguchi, Noboru; Naito, Yoshitaka

    1986-04-01

    In a reprocessing facility, various radiation sources are handled and have many geometrical conditions. To aim drawing up a safety guidebook on radiation shielding in order to evaluate shielding safety in a reprocessing facility with high reliability and reasonableness, JAERI trusted investigation on safety evaluation techniques of radiation shielding in a reprocessing facility to Nuclear Safety Research Association. This report is the collection of investigation results, and describes concept of shielding safety design principle, radiation sources in reprocessing facility and estimation of its strength, techniques of shielding calculations, and definite examples of shielding calculation in reprocessing facility. (author)

  17. Evaluation of safety, an unavoidable requirement in the applications of ionizing radiations

    International Nuclear Information System (INIS)

    Jova Sed, Luis Andres

    2013-01-01

    The safety assessments should be conducted as a means to evaluate compliance with safety requirements (and thus the application of fundamental safety principles) for all facilities and activities in order to determine the measures to be taken to ensure safety. It is an essential tool in decision making. For long time we have linked the safety assessment to nuclear facilities and not to all practices involving the use of ionizing radiation in daily life. However, the main purpose of the safety assessment is to determine if it has reached an appropriate level of safety for an installation or activity and if it has fulfilled the objectives of safety and basic safety criteria set by the designer, operating organization and the regulatory body under the protection and safety requirements set out in the International Basic safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources. This paper presents some criteria and personal experiences with the new international recommendations on this subject and its practical application in the region and demonstrates the importance of this requirement. Reflects the need to train personnel of the operator and the regulatory body in the proportional application of this requirement in practice with ionizing radiation

  18. Maintenance of radiation safety information system

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Ho Sun [Korea Institute of Nuclear Safety, Taejon (Korea, Republic of); Park, Moon Il; Chung, Chong Kyu; Lim, Bock Soo; Kim, Hyung Uk; Chang, Kwang Il; Nam, Kwan Hyun; Cho, Hye Ryan [AD center incubation LAB, Taejon (Korea, Republic of)

    2001-12-15

    The objectives of radiation safety information system maintenance are to maintain the requirement of users, change of job process and upgrade of the system performance stably and effectively while system maintenance. We conduct the code of conduct recommended by IAEA, management of radioisotope inventory database systematically using analysis for the state of inventory database integrated in this system. This system and database will be support the regulatory guidance, rule making and information to the MOST, KINS, other regulatory related organization and general public optimizationally.

  19. A concept of radiation safety in radiodiagnosis and radiotherapy

    International Nuclear Information System (INIS)

    Stavitskij, R.V.; Vasil'ev, V.N.; Lebedev, L.A.; Blinov, N.N.

    1991-01-01

    Conceptual problems of up to date radiation safety dosimetric ensurance in radiation diagnostics and radiotherapy of nontumor diseases are as follows: selection of dosimetric criteria of nonequilibrium radiation influence with an account of probable remote radiation aftereffects; determination of dose-response dependence character by low radiation doses; development of optimal technological principles for radiation diagnostics and therapy; development of organizational and methodical approaches to decreasing dose loads by radiation diagnostics and therapy of nontumor diseases; optimization of studies by ALARA principle

  20. Occupational safety training and practices in selected vocational training institutions and workplaces in Kampala, Uganda.

    Science.gov (United States)

    Kintu, Denis; Kyakula, Michael; Kikomeko, Joseph

    2015-01-01

    Several industrial accidents, some of them fatal, have been reported in Uganda. Causes could include training gaps in vocational training institutions (VTIs) and workplaces. This study investigated how occupational safety training in VTIs and workplaces is implemented. The study was carried out in five selected VTIs and workplaces in Kampala. Data were collected from instructors, workshop technicians, students, workshop managers, production supervisors, machine operators and new technicians in the workplaces. A total of 35 respondents participated in the study. The results revealed that all curricula in VTIs include a component of safety but little is practiced in VTI workshops; in workplaces no specific training content was followed and there were no regular consultations between VTIs and industry on safety skills requirements, resulting in a mismatch in safety skills training. The major constraints to safety training include inadequate funds to purchase safety equipment and inadequate literature on safety.

  1. A Strategic Approach to Establishing and Strengthening National Infrastructure for Radiation, Transport and Waste Safety

    International Nuclear Information System (INIS)

    Mastauskas, A.

    2016-01-01

    In Lithuania, as in the other countries of the world, in various areas, such as medicine, industry, education and training, agriculture the different technologies with the radioactive substances or devices, which generate ionizing radiation, are used. The responsibilities of each party and concern is to ensure the safe use ensure the radiation protection of the population and the environment. For every IAEA Member State in order to ensure the radiation safety, it is necessary to create the States radiation safety infrastructure: legislation, Regulatory Authority, technical support organizations. The International Atomic Energy Agency (IAEA) develops safety standards and assists Member States to create radiation safety infrastructure according the IAEA safety standards requirements. Noting that many Member States would benefit from bringing their radiation safety infrastructure more in line with IAEA Safety Standards, the Secretariat organized a meeting in May of 2014 of senior radiation safety experts from Africa, Asia & the Pacific, Europe, Latin America and North America, with the aim of developing a model strategic approach to establishing and strengthening national radiation safety infrastructure, with a special focus on Member States receiving assistance from the Agency. This model approach was presented to a wider audience on the margins of the IAEA General Conference in September 2014, where it was well received. This paper describes how the key elements of the model strategic approach were applied in Lithuania. The outcome of which showed that there is an adequate radiation safety infrastructure in place covering more than 50 legal acts, the establishment and empowerment of a Regulatory Authority – Radiation Protection Centre, technical support organizations – metrology and dosimetry services, and training centres. In Lithuania there exists a State registry of sources of ionizing radiation and occupational doses of exposure, a strong system of the

  2. Occupational Safety. Hand Tools. Pre-Apprenticeship Phase 1 Training.

    Science.gov (United States)

    Lane Community Coll., Eugene, OR.

    This self-paced student training module on safety when using hand tools is one of a number of modules developed for Pre-apprenticeship Phase 1 Training. Purpose of the module is to teach students the correct safety techniques for operating common hand- and arm-powered tools, including selection, maintenance, technique, and uses. The module may…

  3. The German radiation protection infrastructure with emphasis on the safety of radiation sources and radioactive material

    International Nuclear Information System (INIS)

    Czarwinski, R.; Weimer, G.

    2001-01-01

    Through federalism, Germany has a complicated but well functioning regulatory infrastructure for the safety and security of radiation sources based on a clear legal system. The main features of this infrastructure include the legal framework, the authorization and control systems and the responsibilities of different regulatory authorities, which this paper will describe. In connection with the legal framework, the provisions to control the import/export of radiation sources are briefly discussed and some information is given about the registries of sources. Protection and response measures related to unusual events concerning radiation sources, including orphan sources, will be cited. Also, the education and training of different target groups and punitive actions are touched upon in the paper. Conclusions will be drawn for future national and international actions. (author)

  4. Nuclear Regulatory Systems in Africa: Improving Safety and Security Culture Through Education and Training

    International Nuclear Information System (INIS)

    Kazadi Kabuya, F.

    2016-01-01

    The purpose of this paper is to address the important issue of supporting safety and security culture through an educational and training course program designed both for regulatory staff and licensees. Enhancing the safety and security of nuclear facilities may involve assessing the overall effectiveness of the organization's safety culture. Safety Culture implies steps such as identifying and targeting areas requiring attention, putting emphasis on organizational strengths and weaknesses, human attitudes and behaviours that may positively impact an organization's safety culture, resulting in improving workplace safety and developing and maintaining a high level of awareness within these facilities. Following the terrorist attacks of September 11, 2001, international efforts were made towards achieving such goals. This was realized through meetings, summits and training courses events, with main aim to enhance security at facilities whose activities, if attacked, could impact public health and safety. During regulatory oversight inspections undertaken on some licensee's premises, violations of security requirements were identified. They mostly involved inadequate management oversight of security, lack of a questioning attitude, complacency and mostly inadequate training in both security and safety issues. Using training and education approach as a support to raise awareness on safety and security issues in the framework of improving safety and security culture, a tentative training program in nuclear and radiological safety was started in 2002 with the main aim of vulgarizing the regulatory framework. Real first needs for a training course program were identified among radiographers and radiologists with established working experience but with limited knowledge in radiation safety. In the field of industrial uses of radiation the triggering events for introducing and implementing a training program were: the loss of a radioactive source in a mining

  5. Assessment of radiation safety awareness among nuclear medicine nurses: a pilot study

    International Nuclear Information System (INIS)

    Yunus, N A; Abdullah, M H R O; Said, M A; Ch'ng, P E

    2014-01-01

    All nuclear medicine nurses need to have some knowledge and awareness on radiation safety. At present, there is no study to address this issue in Malaysia. The aims of this study were (1) to determine the level of knowledge and awareness on radiation safety among nuclear medicine nurses at Putrajaya Hospital in Malaysia and (2) to assess the effectiveness of a training program provided by the hospital to increase the knowledge and awareness of the nuclear medicine nurses. A total of 27 respondents attending a training program on radiation safety were asked to complete a questionnaire. The questionnaire consists 16 items and were categorized into two main areas, namely general radiation knowledge and radiation safety. Survey data were collected before and after the training and were analyzed using descriptive statistics and paired sample t-test. Respondents were scored out of a total of 16 marks with 8 marks for each area. The findings showed that the range of total scores obtained by the nuclear medicine nurses before and after the training were 6-14 (with a mean score of 11.19) and 13-16 marks (with a mean score of 14.85), respectively. Findings also revealed that the mean score for the area of general radiation knowledge (7.59) was higher than that of the radiation safety (7.26). Currently, the knowledge and awareness on radiation safety among the nuclear medicine nurses are at the moderate level. It is recommended that a national study be conducted to assess and increase the level of knowledge and awareness among all nuclear medicine nurses in Malaysia

  6. Assessment of radiation safety awareness among nuclear medicine nurses: a pilot study

    Science.gov (United States)

    Yunus, N. A.; Abdullah, M. H. R. O.; Said, M. A.; Ch'ng, P. E.

    2014-11-01

    All nuclear medicine nurses need to have some knowledge and awareness on radiation safety. At present, there is no study to address this issue in Malaysia. The aims of this study were (1) to determine the level of knowledge and awareness on radiation safety among nuclear medicine nurses at Putrajaya Hospital in Malaysia and (2) to assess the effectiveness of a training program provided by the hospital to increase the knowledge and awareness of the nuclear medicine nurses. A total of 27 respondents attending a training program on radiation safety were asked to complete a questionnaire. The questionnaire consists 16 items and were categorized into two main areas, namely general radiation knowledge and radiation safety. Survey data were collected before and after the training and were analyzed using descriptive statistics and paired sample t-test. Respondents were scored out of a total of 16 marks with 8 marks for each area. The findings showed that the range of total scores obtained by the nuclear medicine nurses before and after the training were 6-14 (with a mean score of 11.19) and 13-16 marks (with a mean score of 14.85), respectively. Findings also revealed that the mean score for the area of general radiation knowledge (7.59) was higher than that of the radiation safety (7.26). Currently, the knowledge and awareness on radiation safety among the nuclear medicine nurses are at the moderate level. It is recommended that a national study be conducted to assess and increase the level of knowledge and awareness among all nuclear medicine nurses in Malaysia.

  7. Monthly radiation protection training of workers: An evaluation of two years operational practice

    International Nuclear Information System (INIS)

    Berus, D.; Covens, P.

    2011-01-01

    Radiation protection training and education is important in stimulating safety culture of occupationally exposed workers. Taking into account the mandatory requirements in relation to education and training a digital training tool was introduced for communication of personal dose results and regular information on radiation protection. This tool enables that personal dose reports are monthly sent to the individual mailbox of workers together with short comprehensive slideshows on radiation protection topics. After two years of operational practice a survey was organised to evaluate the training tool. The results show that the majority (92%) of the occupationally exposed workers are aware of the communication of personal dose results through e-mail. Furthermore, 81% of these workers are also aware of their monthly and cumulated dose level. The monthly information on radiation protection topics is however less consulted. Around 40% of the workers that noticed the link are indifferent to the monthly information. The interest in radiation protection issues increases however with the education level.

  8. The first symposium of Research Center for Radiation Safety, NIRS. Perspective of future studies of radiation safety

    International Nuclear Information System (INIS)

    Shimo, Michikuni

    2002-03-01

    This paper summarizes presentations given in the title symposium, held at the Conference Room of National Institute of Radiological Sciences (NIRS) on November 29 and 30, 2001. Contained are Introductory remarks: Basic presentations concerning exposure dose in man; Environmental levels of radiation and radioactivity, environmental radon level and exposure dose, and radiation levels in the specific environment (like in the aircraft): Special lecture (biological effects given by space environment) concerning various needs for studies of radiation safety; Requirement for open investigations, from the view of utilization, research and development of atomic energy, from the clinical aspect, and from the epidemiological aspect: Special lecture (safety in utilization of atomic energy and radiation-Activities of Nuclear Safety Commission of Japan) concerning present state and perspective of studies of radiation safety; Safety of radiation and studies of biological effects of radiation-perspective, and radiation protection and radiation safety studies: Studies in the Research Center for Radiation Safety; Summary of studies in the center, studies of the biological effects of neutron beam, carcinogenesis by radiation and living environmental factors-complicated effects, and studies of hereditary effects: Panel discussion (future direction of studies of radiation safety for the purpose of the center's direction): and concluding remarks. (N.I.)

  9. Sports injuries, drowning and exposure to radiation concern Canada Safety Council meeting

    International Nuclear Information System (INIS)

    Oliver, Caroline.

    1979-01-01

    Hazards associated with surface sports, aquatic sports and exposure to radiation were considered at a meeting of the Canada Safety Council in late 1979. The session on radiation noted that 6 of 20000 radiation workers wearing dosimeters were exposed to a dose in excess of 5 rem, the annual limit set by the Atomic Energy Control Board. Radiographers were in the job classification receiving the highest doses of ionizing radiation. Concern was expressed for the emission of damaging radiation from broken mercury vapour lamps. Increased regulation rather than training was seen as the most effective solution. (T.I.)

  10. Education and training requirements in the revised European Basic Safety Standards Directive

    International Nuclear Information System (INIS)

    Mundigl, S.

    2009-01-01

    The European Commission is currently developing a modified European Basic Safety Standards Directive covering two major objectives: the consolidation of existing European Radiation Protection legislation, and the revision of the European Basic Safety Standards. The consolidation will merge the following five Directives into one single Directive: the Basic Safety Standards Directive, the Medical Exposures Directive, the Public Information Directive, the Outside Workers Directive, and the Directive on the Control of high-activity sealed radioactive sources and orphan sources. The revision of the European Basic Safety Standards will take account of the latest recommendations by the International Commission on Radiological Protection (ICRP) and shall improve clarity of the requirements where appropriate. It is planned to introduce more binding requirements on natural radiation sources, on criteria for clearance, and on the cooperation between Member States for emergency planning and response, as well as a graded approach for regulatory control. One additional goal is to achieve greater harmonisation between the European BSS and the international BSS. Following a recommendation from the Article 31 Group of Experts, the current draft of the modified BSS will highlight the importance of education and training by dedicating a specific title to radiation protection education, training and information. This title will include a general requirement on the Member States to ensure the establishment of an adequate legislative and administrative framework for providing appropriate radiation protection education, training and information. In addition, there will be specific requirements on training in the medical field, on information and training of workers in general, of workers potentially exposed to orphan sources, and to emergency workers. The revised BSS directive will include requirements on the competence of a radiation protection expert (RPE) and of a radiation protection

  11. Radiation protection education and training of radiographers

    International Nuclear Information System (INIS)

    Elsakkers, P.

    1995-01-01

    The International Society of Radiographers and Radiological Technicians (ISRRT) is an international non-governmental organisation in official relationship with the World Health Organization. Over 50 countries are members of the ISRRT. The ISRRT encourages and facilitates communication between radiographers throughout the world. The ISRRT has produced several documents, e.g. ''The Role of the Radiographer in Europe''. The ISRRT has also done research and developed initiatives to analyse the quality of training of radiographers in the different member states of the EC. Research was done in the member states to analyse the efforts in the field of quality control. An extended study was performed on the current level of education in radiation protection in the European member states. The ICRP recommends in its publications the need of good training and continuing education for all radiographers. An important part of the basic training of radiographers should focus on the performance of radiation protection and quality control tests. Good daily practice can decrease patient dose in many ways. (Author)

  12. Children Road Safety Training with Augmented Reality (AR) [Demo

    OpenAIRE

    Lugmayr, Artur; Tsang, Joyce; Williams, Toby; Lim, Casey X; Teo, Yeet Yung; Farmer, Matthew

    2018-01-01

    Children killed or seriously injured through road accidents can be avoided through an appropriate safety training. Through play and engagement children learn and understand hazards at i.e. railway stations, bus stops, crossings, school zones, train stations, footpaths, or while cycling. We developed a rapid prototype of an Augmented Reality (AR) safety training proof-of-concept demonstrator for a scaled real-world model of dangerous road hazards. Two scenarios have been picked to give childre...

  13. Radiation safety aspects in the use of radiation sources in industrial and heath-care applications

    International Nuclear Information System (INIS)

    Venkat Raj, V.

    2001-01-01

    The principle underlying the philosophy of radiation protection and safety is to ensure that there exists an appropriate standard of protection and safety for humans, without unduly limiting the benefits of the practices giving rise to exposure or incurring disproportionate costs in interventions. To realise these objectives, the International Commission on Radiation Protection (ICRP-60) and IAEA's Safety Series (IAEA Safety Series 120, 1996) have enunciated the following criteria for the application and use of radiation: (1) justification of practices; (2) optimisation of protection; (3) dose limitation and (4) safety of sources. Though these criteria are the basic tenets of radiation protection, the radiation hazard potentials of individual applications vary and the methods to achieve the above mentioned objectives principles are different. This paper gives a brief overview of the various applications of radiation and radioactive sources in India, their radiation hazard perspective and the radiation safety measures provided to achieve the basic radiation protection philosophy. (author)

  14. Radiation protection and safety of workers

    International Nuclear Information System (INIS)

    Lindhe, J.C.

    1997-01-01

    This section briefly reviews the principles applicable to radiation protection and safety of workers, and methods that could be used to minimise occupational exposure in reclamation work. In considering the clean up of areas shortly after an accident, a decision would have to be made whether to implement clean-up actions early and thus cause higher occupational doses, or wait until short-lived isotopes have decayed and/or weathering has reduced the radiation levels. For example, the decision may be to stabilise the contamination using sprays to prevent re-suspension followed by a delay before actual clean-up starts. The timing of such actions would depend on many factors, including weather conditions, the area involved, equipment available and the competence of the work force. Means of reducing occupational exposure while carrying out the tasks should, as far as possible, be clearly defined in 'work procedures'. In general, reductions in occupational exposure during operational tasks can be accomplished by the use of shielding and limiting the time that workers spend exposed to radiation. (au)

  15. Occupational safety and health training in Alaska.

    Science.gov (United States)

    Hild, C M

    1992-01-01

    We have eleven years of experience delivering a wide variety of worker education programs in cross-cultural settings to reduce the levels of occupational fatalities and injuries in Alaska. We published an instructional manual and informational poster for workers, on Alaska's "Right-To-Know" law regarding chemical and physical hazards. The "Job Hazard Recognition Program" curriculum for high school students has received national acclaim for being proactive in dealing with worker safety education before the student becomes a member of the work force. Adult educational programs and materials have been designed to include less lecture and formal presentation, and more practical "hands on" and on-the-job experience for specific trades and hazards. New industry specific manuals deal with hazardous waste reduction as a method to reduce harm to the employee. Difficulty in getting instructors and training equipment to rural locations is dealt with by becoming creative in scheduling classes, using locally available equipment, and finding regional contacts who support the overall program. Alternative approaches to funding sources include building on regional long-term plans and establishing complementary program objectives.

  16. Safety and radiation protection in Indian nuclear power plants

    International Nuclear Information System (INIS)

    Ghadge, S.G.

    2008-01-01

    Full text: Nuclear energy, an important option for electricity generation is environment friendly, technologically proven, economically competitive and associated with the advantages of energy security and diversity. At present, India has an installed nuclear power generation capacity of 4120 M We with 6 more reactors are under construction/ commissioning at 4 sites. Nuclear power program, in India, as of now is primarily based on pressurized heavy water technology and these reactors are designed with safety features, such as, independent and diverse shut down systems, emergency core cooling system, double containment; pressure suppression pool etc. The principles of redundancy, diversity, fail-safe and passive systems are used in the design. The fundamental safety objective is to protect people and the environment from harmful effects of ionizing radiation. In this regard the prime responsibility for safety rests with the organization responsible for facilities and activities that give rise to radiation risks and is achieved by establishing and maintaining the necessary competence, providing adequate training and information, establishing procedures and arrangements to maintain safety under all conditions; verifying appropriate design and the adequate quality of facilities and activities and of their associated equipment; ensuring the safe control of all radioactive material that is used, produced, stored or transported, ensuring the safe control of all radioactive waste that is generated. 'Radiation Protection for Nuclear Facilities', issued by Atomic Energy Regulatory Board (the regulatory authority for NPPs in India) is the basic document for following radiation protection procedures in NPPs. Approved work procedures for all radiation jobs exist. Pre job briefing and post job analysis are carried out. Radiation protection is integrated with plant operation. Radiation levels indicate the performance of several systems. Several measures are adopted in design and

  17. Development of Safety Review Guidance for Research and Training Reactors

    International Nuclear Information System (INIS)

    Oh, Kju-Myeng; Shin, Dae-Soo; Ahn, Sang-Kyu; Lee, Hoon-Joo

    2007-01-01

    The KINS already issued the safety review guidance for pressurized LWRs. But the safety review guidance for research and training reactors were not developed. So, the technical standard including safety review guidance for domestic research and training reactors has been applied mutates mutandis to those of nuclear power plants. It is often difficult for the staff to effectively perform the safety review of applications for the permit by the licensee, based on peculiar safety review guidance. The NRC and NSC provide the safety review guidance for test and research reactors and European countries refer to IAEA safety requirements and guides. The safety review guide (SRG) of research and training reactors was developed considering descriptions of the NUREG- 1537 Part 2, previous experiences of safety review and domestic regulations for related facilities. This study provided the safety review guidance for research and training reactors and surveyed the difference of major acceptance criteria or characteristics between the SRG of pressurized light water reactor and research and training reactors

  18. The practice of safety culture construction in radiation processing enterprise

    International Nuclear Information System (INIS)

    Kong Xiangshan; Zhang Yue; Yang Bin; Xu Tao; Liu Wei; Hao Jiangang

    2014-01-01

    Security is an integral part of the process of business operations. The radiation processing enterprises due to their own particularity, more need to focus on the operation of the safety factors, the construction of corporate safety culture is of great significance in guiding carry out the work of the Radiation Protection. Radiation processing enterprises should proceed from their own characteristics, the common attitude of security systems and security construction, and constantly improved to ensure the personal safety of radiation workers in the area of safety performance. (authors)

  19. Code of practice for safety in laboratory - non ionising radiation

    International Nuclear Information System (INIS)

    Ramli Jaya; Mohd Yusof Mohd Ali; Khoo Boo Huat; Khatijah Hashim

    1995-01-01

    The code identifies the non-ionizing radiation encountered in laboratories and the associated hazards. The code is intended as a laboratory standard reference document for general information on safety requirements relating to the usage of non-ionizing radiations in laboratories. The nonionizing radiations cover in this code, namely, are ultraviolet radiation, visible light, radio-frequency radiation, lasers, sound waves and ultrasonic radiation. (author)

  20. Review of radiation safety in the cardiac catheterization laboratory

    International Nuclear Information System (INIS)

    Johnson, L.W.; Moore, R.J.; Balter, S.

    1992-01-01

    With the increasing use of coronary arteriography and interventional procedures, radiation exposure to patients and personnel working in cardiac catheterization laboratories has increased. Proper technique to minimize both patient and operator exposure is necessary. A practical approach to radiation safety in the cardiac catheterization laboratory is presented. This discussion should be useful to facilities with well-established radiation safety programs as well as facilities that require restructuring to cope with the radiation environment in a modern cardiac catheterization laboratory

  1. Radiation safety actuality in Republic of Moldova

    International Nuclear Information System (INIS)

    Kuharuk, E.S.

    2011-01-01

    Radioecological monitoring issues and radiation safety are actual in the Republic of Moldova. Japan events show us the possibility of natural disasters. Republic of Moldova is surrounded by 8 NPPs, the closest being at the distance of 160 km. Moldovas territory is in seismic zone where underground earthquake shocks reaches 7 points or more. Thatis why radiation safety and radioecological monitoring is actual in our republic. Traces of Chernobyl were left in Moldovas soils. The fallouts of radio nuclides formed on the soil surfaces in the Republic of Moldova following the Chernobyl Nuclear Power Station Accident have been continuously affected by attacks of both natural and technicaly generated agents since the time of fallout. During the past decade a shift in emphasis has taken place regarding the need for more complete and accurate information on reservoir sedimentation. Classical sedimentation surveys involve repeated field measurement and, therefore, this is probably the most costly and time consuming method. The application of radio nuclides, particularly Cs 137, for water erosion and sedimentation studies in Republic of Moldova has not been attempted so far. This paper presents the results obtained on reservoir sedimentation rates in an area subjected to wide range in land degradation dy sheet-rill erosion. The profil characteristics support the assumption that in most undisturbed sites there is a sharp decline in Cs 137 activity with increasing dept. Such an asymmetrical distribution of the Cs 137 would suggest a standard pattern in the form of a cantilever. If the validity of this assamption is accepted it is possible to define two major types of Cs 137 cantilever distribution: shallow and deep buried cantilever. The main criterion in classifying these pattents lies generally in the shape of Cs 137 depth profile and particularly in burial magnitude of Cs 137 peak derived from Chernobyl. Hills area has been impacted by greatest sendimentation. This regional

  2. Integration of radiation protection in safety management: sharing best practices between radiation protection and other safety areas

    International Nuclear Information System (INIS)

    Kockerols, Pierre; Fessler, Andreas

    2008-01-01

    Full text: The Institute for Reference Materials and Measurements (IRMM) located in Geel is one of the seven institutes of the Joint Research Centre of the European Commission (EC, DG JRC). The institute was founded in 1960 as a nuclear research centre, but has gradually shifted its activities to also include 'non-nuclear' domains, mainly in the areas of food safety and environmental surveillance. As the activities on the IRMM site are currently quite diversified, they necessitate the operation of nuclear controlled areas, accelerators, as well as bio safety restricted areas and chemical laboratories. Therefore, the care for occupational health and safety and for environmental protection has to take into consideration various types of hazards and threats. Recently an integrated management system according to ISO-9001, ISO-14001 and OHSAS-18001 was implemented. The integrated system combines 'vertically' quality, occupational health and safety and environmental issues and covers 'horizontally' the nuclear, biological and chemical fields. The paper outlines how the radiation protection can be included in an overall health, safety and environmental management system. It will give various practical examples where synergies can be applied: 1-) the overall policy; 2-) The assessment and ranking of all risks and the identification, in a combined way, of the appropriate prevention measures; 3-) The planning and review of related actions; 4-) The monitoring, auditing and registration of anomalies and incidents and the definition of corrective actions; 5-) The training of personnel based on lessons learned from past experiences; 6-) The organisation of an internal emergency plan dealing with nuclear and non-nuclear hazards. Based on these examples, the benefits of having an integrated approach are commented. In addition, the paper will illustrate how the recent ICRP fundamental recommendations and more particularly some of the principles of radiation protection such as

  3. Moon manned missions radiation safety analysis

    Science.gov (United States)

    Tripathi, R. K.; Wilson, J. W.; de Anlelis, G.; Badavi, F. F.

    , from very simple shelters to more complex bases, are considered in full detail (e.g., shape, thickness, materials, etc) with considerations of various shielding strategies. In this first analysis all the shape considered are cylindrical or composed of combination of cylinders. Moreover, a radiation safety analysis of more future possible habitats like lava tubes has been also performed.

  4. Use of a Web Site to Enhance Criticality Safety Training

    International Nuclear Information System (INIS)

    Huang, S T; Morman, J

    2003-01-01

    Currently, a website dedicated to enhancing communication and dissemination of criticality safety information is sponsored by the U.S. Department of Energy (DOE) Nuclear Criticality Safety Program (NCSP). This website was developed as part of the DOE response to the Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 97-2, which reflected the need to make criticality safety information available to a wide audience. The website is the focal point for DOE nuclear criticality safety (NCS) activities, resources and references, including hyperlinks to other sites actively involved in the collection and dissemination of criticality safety information. The website is maintained by the Lawrence Livermore National Laboratory (LLNL) under auspices of the NCSP management. One area of the website contains a series of Nuclear Criticality Safety Engineer Training (NCSET) modules. During the past few years, many users worldwide have accessed the NCSET section of the NCSP website and have downloaded the training modules as an aid for their training programs. This trend was remarkable in that it points out a continuing need of the criticality safety community across the globe. It has long been recognized that training of criticality safety professionals is a continuing process involving both knowledge-based training and experience-based operations floor training. As more of the experienced criticality safety professionals reach retirement age, the opportunities for mentoring programs are reduced. It is essential that some method be provided to assist the training of young criticality safety professionals to replenish this limited human expert resource to support on-going and future nuclear operations. The main objective of this paper is to present the features of the NCSP website, including its mission, contents, and most importantly its use for the dissemination of training modules to the criticality safety community. We will discuss lessons learned and several ideas

  5. Radiation in the human environment: health effects, safety and acceptability

    International Nuclear Information System (INIS)

    Gonzalez, A.J.; Anderer, J.

    1990-01-01

    This paper reports selectively on three other aspects of radiation (used throughout to mean ionizing radiation) in the human environment: the human health effects of radiation, radiation safety policy and practices, and the acceptability of scientifically justified practices involving radiation exposures. Our argument is that the science of radiation biology, the judgemental techniques of radiation safety, and the social domain of radiation acceptability express different types of expertise that should complement - and not conflict with or substitute for - one another. Unfortunately, communication problems have arisen among these three communities and even between the various disciplines represented within a community. These problems have contributed greatly to the misperceptions many people have about radiation and which are frustrating a constructive dialogue on how radiation can be harnessed to benefit mankind. Our analysis seeks to assist those looking for a strategic perspective from which to reflect on their interaction with practices involving radiation exposures. (author)

  6. Assessment of radiation safety in well logging

    International Nuclear Information System (INIS)

    Alles, A.; Pérez, Y.; Duménigo, C.

    2015-01-01

    Radiation safety assessments required by current regulations are a means to verify compliance with the requirements. Different methods have been used for this purpose. In the paper the results of applying the method of risk matrices, applied for the first time in the practice of well logging are exposed. For each initiating event frequency of occurrence, the severity of its consequences and the probability of failure of the barriers identified were evaluated. Starting from these assumptions, the risk associated is determined for each of the identified accident sequences, using for this the SEVRRA code 'Risk Assessment System', originally designed for use in radiotherapy. As an result sequences increased risk associated with the practice of well logging were identified, which is the starting point for the further implementation of a coherent program of dose optimization in practice. [es

  7. Radiation conditions at the training IRT-2000 and IR-100 reactors

    International Nuclear Information System (INIS)

    Fedorin, Eh.V.; Bronshtejn, I.Eh; Martynov, Yu.N.; Chistyakov, N.I.

    1978-01-01

    The experience is reviewed of radiation hygiene surveys and radiation safety provision during instructional processes on two training and research nuclear reactors of the IRT-2000 type (No. 1 and No. 2) and on an IR-200 reactor. From an analysis of individual dosimetry data the conclusion is made that the trainees and personnel are exposed mainly to external gamma-radiation and also, to a minor degree, to thermal neutrons and beta-radiation. It has been found that a high level of radiation safety is ensured on the training and research so that research and instruction activities are conducted at annual levels of exposure substantially lower than 0.5 rem in the case of trainees and 5 rem in the case of personnel

  8. Training the Masses ? Web-based Laser Safety Training at LLNL

    Energy Technology Data Exchange (ETDEWEB)

    Sprague, D D

    2004-12-17

    The LLNL work smart standard requires us to provide ongoing laser safety training for a large number of persons on a three-year cycle. In order to meet the standard, it was necessary to find a cost and performance effective method to perform this training. This paper discusses the scope of the training problem, specific LLNL training needs, various training methods used at LLNL, the advantages and disadvantages of these methods and the rationale for selecting web-based laser safety training. The tools and costs involved in developing web-based training courses are also discussed, in addition to conclusions drawn from our training operating experience. The ILSC lecture presentation contains a short demonstration of the LLNL web-based laser safety-training course.

  9. Nuclear criticality safety training: guidelines for DOE contractors

    International Nuclear Information System (INIS)

    Crowell, M.R.

    1983-09-01

    The DOE Order 5480.1A, Chapter V, Safety of Nuclear Facilities, establishes safety procedures and requirements for DOE nuclear facilities. This guide has been developed as an aid to implementing the Chapter V requirements pertaining to nuclear criticality safety training. The guide outlines relevant conceptual knowledge and demonstrated good practices in job performance. It addresses training program operations requirements in the areas of employee evaluations, employee training records, training program evaluations, and training program records. It also suggests appropriate feedback mechanisms for criticality safety training program improvement. The emphasis is on academic rather than hands-on training. This allows a decoupling of these guidelines from specific facilities. It would be unrealistic to dictate a universal program of training because of the wide variation of operations, levels of experience, and work environments among DOE contractors and facilities. Hence, these guidelines do not address the actual implementation of a nuclear criticality safety training program, but rather they outline the general characteristics that should be included

  10. Radiological safety training for uranium facilities

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-01

    This handbook contains recommended training materials consistent with DOE standardized core radiological training material. These materials consist of a program management guide, instructor`s guide, student guide, and overhead transparencies.

  11. Regulation on the organizatjon of radiation safety control bodies

    International Nuclear Information System (INIS)

    1975-01-01

    This is a basic document on matters of structure, organization, objectives, rights, and responsibilities of agencies enforcing compliance with radiation safety standards set up in Bulgaria. Under Public Health Law and Ministerial Council Decree No. 117, the organization and management of radiation safety in Bulgaria is entrusted to the Ministry of Public Health (MPH). Within its agency, the State Sanitary Control, authorities specialized in the area of radiation safety are as follows: the Radiation Hygiene Division (RHD) of the MPH Hygiene-and Epidemiology Bureau (HEB); the Specialized Radiation Safety Inspectorate of the Research Institute of Radiobiology and Radiation Hygiene (RIRRH); the Radiation Hygiene Sections of country HEBs; and State sanitary Inspectors assigned to large establishments in the country. (G.G.)

  12. Education and training in radiation protection in Morocco: experiences and perspectives

    Energy Technology Data Exchange (ETDEWEB)

    El Messaoudi, M.; Essadki, H.; Lferde, M.; Moutia, Z. [Faculte des Sciences, Dept. de Physique, Rabat (Morocco)

    2006-07-01

    Education and training are of primary importance for achieving competence in radiation protection. Unfortunately, one records the absence of a national legislation specifying the training of the qualified expert. On the basis of the observation which there exists in the Faculties of Sciences of Morocco the courses in radiation protection within the framework of preparation of the D.E.S.A;/M.A.S.T.E.R., we will propose to create a master in radiation protection within the framework of the reform of the higher education in progress. This reform proposes three levels: licence, Master, Ph.D. According to the B.S.S., any person who is occupationally exposed to ionising radiation or who may be exposed in the course of the work should receive adequate training in radiation protection. The Nuclear Physics Laboratory of Rabat (N.P.L.R.) has participated in the organisation of IAEA postgraduate educational and training courses in radiation protection and the safety of radiation sources since 1998. It is also pioneer in the preparation of the doctorate thesis in radiation protection. The objective of this work is to present the important points of national strategy for building competence in radiation protection and the role of Radiation Protection Group(R.P.D.), created recently at our Physics department, to ensure the organisation of a radiation protection master. (authors)

  13. Education and training in radiation protection in Morocco: experiences and perspectives

    International Nuclear Information System (INIS)

    El Messaoudi, M.; Essadki, H.; Lferde, M.; Moutia, Z.

    2006-01-01

    Education and training are of primary importance for achieving competence in radiation protection. Unfortunately, one records the absence of a national legislation specifying the training of the qualified expert. On the basis of the observation which there exists in the Faculties of Sciences of Morocco the courses in radiation protection within the framework of preparation of the D.E.S.A;/M.A.S.T.E.R., we will propose to create a master in radiation protection within the framework of the reform of the higher education in progress. This reform proposes three levels: licence, Master, Ph.D. According to the B.S.S., any person who is occupationally exposed to ionising radiation or who may be exposed in the course of the work should receive adequate training in radiation protection. The Nuclear Physics Laboratory of Rabat (N.P.L.R.) has participated in the organisation of IAEA postgraduate educational and training courses in radiation protection and the safety of radiation sources since 1998. It is also pioneer in the preparation of the doctorate thesis in radiation protection. The objective of this work is to present the important points of national strategy for building competence in radiation protection and the role of Radiation Protection Group(R.P.D.), created recently at our Physics department, to ensure the organisation of a radiation protection master. (authors)

  14. Radiation safety aspects of fluorescent lamp starters incorporating radiation source

    Energy Technology Data Exchange (ETDEWEB)

    Sadagopan, Geetha [Radiological Physics and Advisory Division, Bhabha Atomic Research Centre, Trombay, Mumbai (India); Shukla, V.K. [Environmental Assessment Division, Bhabha Atomic Research Centre, Trombay, Mumbai (India)

    2000-05-01

    A fluorescent lamp starter is a switch applies the voltage to the fluorescent tube after sufficient preheating to allow the tube to conduct an electric current. Radioactive substances used in the starters are {sup 85}Kr, {sup 147}Pm, {sup 3}H and {sup 232}Th. In India, fluorescent lamp starters are classified as consumer products and users are outside regulatory control. However, regulatory control is exercised over the manufacturers at the production stage. Tritium activity measured in the lamp starters ranged from 400-4500 Bq with a mean activity of 1.78 kBq. Thorium activity measured varied from 0.44-3.3 mg. The results of radiation safety assessment of the workplace and radioactivity estimation in the starters are discussed in this paper. (author)

  15. Radiation safety aspects of fluorescent lamp starters incorporating radiation source

    International Nuclear Information System (INIS)

    Sadagopan, Geetha; Shukla, V.K.

    2000-01-01

    A fluorescent lamp starter is a switch applies the voltage to the fluorescent tube after sufficient preheating to allow the tube to conduct an electric current. Radioactive substances used in the starters are 85 Kr, 147 Pm, 3 H and 232 Th. In India, fluorescent lamp starters are classified as consumer products and users are outside regulatory control. However, regulatory control is exercised over the manufacturers at the production stage. Tritium activity measured in the lamp starters ranged from 400-4500 Bq with a mean activity of 1.78 kBq. Thorium activity measured varied from 0.44-3.3 mg. The results of radiation safety assessment of the workplace and radioactivity estimation in the starters are discussed in this paper. (author)

  16. A radiation protection training program with a focus on communicating risk

    International Nuclear Information System (INIS)

    Clement, C.H.; Zelmer, R.L.; Tourneur, F.

    2000-01-01

    Radiation protection training is generally provided to promote a radiologically safe work environment, and to help ensure that doses are kept as low as reasonably achievable. In many cases, this reason makes good sense. Radiological risk can often be a significant concern when working with radioactive materials or radiation-emitting devices. However, in conducting the work of the Low-Level Radioactive Waste Management Office, it is often the case that the perception of radiological risk is of greater concern that the radiological risk itself. In this case, radiation protection training can serve another equally important purpose. It can be used to convey, in a balanced manner, the actual radiological risks associated with the work, and to put those risks in perspective. For individuals who are not familiar with radiation safety, effective radiation protection training that focuses on risk communication can reduce the level of concern surrounding work to be performed. This, in turn, can have an overall positive impact on the efficiency of the work, on goodwill within the community where the work is taking place, and even on the overall safety of those conducting the work. The radiation protection training program developed and implemented by the Low-Level Radioactive Waste Management Office is described in the context of other, more traditional radiation protection training programs. (author)

  17. Operational and safety requirement of radiation facility

    International Nuclear Information System (INIS)

    Zulkafli Ghazali

    2007-01-01

    Gamma and electron irradiation facilities are the most common industrial sources of ionizing radiation. They have been used for medical, industrial and research purposes since the 1950s. Currently there are more than 160 gamma irradiation facilities and over 600 electron beam facilities in operation worldwide. These facilities are either used for the sterilization of medical and pharmaceutical products, the preservation of foodstuffs, polymer synthesis and modification, or the eradication of insect infestation. Irradiation with electron beam, gamma ray or ultra violet light can also destroy complex organic contaminants in both liquid and gaseous waste. EB systems are replacing traditional chemical sterilization methods in the medical supply industry. The ultra-violet curing facility, however, has found more industrial application in printing and furniture industries. Gamma and electron beam facilities produce very high dose rates during irradiation, and thus there is a potential of accidental exposure in the irradiation chamber which can be lethal within minutes. Although, the safety record of this industry has been relatively very good, there have been fatalities recorded in Italy (1975), Norway (1982), El Salvador (1989) and Israel (1990). Precautions against uncontrolled entry into irradiation chamber must therefore be taken. This is especially so in the case of gamma irradiation facilities those contain large amounts of radioactivity. If the mechanism for retracting the source is damaged, the source may remain exposed. This paper will, to certain extent, describe safety procedure and system being installed at ALURTRON, Nuclear Malaysia to eliminate accidental exposure of electron beam irradiation. (author)

  18. Present status of education for radiation safety during clinical examinations and the role of the radiological technologist

    International Nuclear Information System (INIS)

    Satou, Yukimitsu

    1988-01-01

    The applications of radiation to the medical field are increasing steadily, along with advances in radiation technology and development of new medical equipment. Medical applications of radiation differ from applications in other fields, because the patient is exposed to radiation during examination and radiotherapy. Consequently, it is important that training courses in radiation safety for radiological technologists, medical doctors and nurses be periodically carried out to ensure a more effective and safe utilization of radiation. Furthermore, it is important that such training be based on a practical education curriculum, including basic knowledge, technical training, and safe habits. In this paper, we discuss the appropriate role and attitudes of the radiological technologist in radiation safety education. (author)

  19. Present status of education for radiation safety during clinical examinations and the role of the radiological technologist

    Energy Technology Data Exchange (ETDEWEB)

    Satou, Yukimitsu

    1988-10-01

    The applications of radiation to the medical field are increasing steadily, along with advances in radiation technology and development of new medical equipment. Medical applications of radiation differ from applications in other fields, because the patient is exposed to radiation during examination and radiotherapy. Consequently, it is important that training courses in radiation safety for radiological technologists, medical doctors and nurses be periodically carried out to ensure a more effective and safe utilization of radiation. Furthermore, it is important that such training be based on a practical education curriculum, including basic knowledge, technical training, and safe habits. In this paper, we discuss the appropriate role and attitudes of the radiological technologist in radiation safety education.

  20. Teaching materials for radiation training and user guides

    International Nuclear Information System (INIS)

    Furuta, Etsuko; Kusama, Keiji

    2014-01-01

    Training for radiation teaching is important because of understanding radiation. Training methods except for a cloud chamber were proposed in this study; for example, drawing a visual image of a sand-picture by scanning its beta-rays with a handy type GM dosimeter. Though training hours are limited, measurement of alpha-, beta- and gamma-rays is useful to understand important characteristics of radiation. So, useful radioactive materials are the keys of radiation training. Small sizes of radioactive minerals, chemical reagent of KCl and radon progeny in the air were excellent radioactive materials for training. The differences between ionization and excitation of radiation, the relationship between penetration powers of radiation and shield effects of materials, the differences between natural radioactive materials and artificial ones, and other extension lectures were taught usefully for every grade as training by using these teaching materials. (author)

  1. The Australian radiation protection and Nuclear Safety Agency

    International Nuclear Information System (INIS)

    Macnab, D.; Burn, P.; Rubendra, R.

    1998-01-01

    The author talks about the Australian Radiation Protection and Nuclear Safety Agency (ARPANSA), the new regulatory authority which will combine the existing resources of the Australian Radiation Laboratory and the Nuclear Safety Bureau. Most uses of radiation in Australia are regulated by State or Territory authorities, but there is presently no regulatory authority for Commonwealth uses of radiation. To provide for regulation of the radiation practices of the Commonwealth, the Australian Government has decided to establish the Australian Radiation Protection and Nuclear Safety Agency (ARPANSA) and a Bill has passed through the House of Representatives and will go to the Spring sitting of the Senate. The new agency will subsume the resources and functions of the Nuclear Safety Bureau and the Australian Radiation Laboratory, with additional functions including the regulation of radiation protection and nuclear safety of Commonwealth practices. Another function of ARPANSA will be the promotion of uniform regulatory requirements for radiation protection across Australia. This will be done by developing, in consultation with the States and Territories, radiation health policies and practices for adoption by the Commonwealth, States and Territories. ARPANSA will also provide research and services for radiation health, and in support of the regulatory and uniformity functions. The establishment of ARPANSA will ensure that the proposed replacement research reactor, the future low level radioactive waste repository and other Commonwealth nuclear facilities and radiation practices are subject to a regulatory regime which reflects the accumulated experience of the States and Territories and best international practice, and meets public expectations

  2. Radiation protection training: twenty year experience in Hungary

    International Nuclear Information System (INIS)

    Pellet, Sandor; Kanyar, Bela; Zagyvay, Peter; Solymosi, Jozsef; Bujtas, Tibor; Feher, Istvan; Giczi, Ferenc; Deme, Sandor; Uray, Istvan

    2008-01-01

    In Hungary, radiation protection training for radiation workers has been introduced in very early, just following the publication of the ICRP recommendation No. 26. Before that, in some of the institutions, radiation protection training was recommended for technicians and medical doctors working in nuclear medicine, X-ray diagnostic radiology and radiation therapy, as well as in some of industrial applications, but not on regular way. Since 1988, radiation protection training regulated by the Ministry of Health and required for all of the workers in radiation workplaces licensed by the authority the State Public Health and Medical Officers Service (SPHAMOS). Decree No. 16/2000. (VI. 8.) EuM of the Minister of Health on the enforcement of Clauses of the Nuclear Law 116/1996 regulates the radiation protection training of Radiation Workers (RW). Annex 4 of Decree sees radiation protection training and in-service training: Persons performing conducted work in the field of the use of the nuclear energy and any other work within legal relationship shall be educated in training and in-service training at an interval of 5 years. Three levels of the training introduced; basic, extended and comprehensive, based on radiation risk related to the given job. Several institutions are involved in performing radiation protection training, such universities, scientific institutions, Regional Radiological Health Centers (RRHC) of SPHAMOS, private enterprises etc. All training course material is subject to accreditation. Most of the faculties of the universities involved in training of natural sciences and engineering provide subjects on the fundamentals of dosimetry, radiobiology and radiation protection within the courses of physics, biophysics, chemistry, biology, ecology etc. These courses take 5-10 contact hours per week on average. The members of the Hungarian Committee of EUTERP Platform summarize their broad experience collected in the past 20 year. (author)

  3. Capacity training for the personnel of radiation monitoring in metal recycling

    International Nuclear Information System (INIS)

    Caveda Ramos, C.A.; Dominguez Ley, O.

    2013-01-01

    In this work it a course for training for the personnel involved in the radiation monitoring of metal recycling is presented. The contents were elaborated taken into account the IAEA recommendations for the development of capacity and training activities in radiological safety and in the Guide for the control of radioactive material in metal recycling. The program is divided in eleven parts and the duration time is two weeks. Among the main covered topics are the requirements for radiation monitoring in metal recycling; response to detection of radioactive material and effects of the ionizing radiation in man and environment

  4. Radiation protection education and training in Switzerland: What can be improved?

    International Nuclear Information System (INIS)

    Jahn, Swen-Gunnar

    2013-01-01

    In the frame of the amendment of the Swiss radiation protection regulations (StSV) the radiation protection education and training system is checked whether there is a need for improvement measures or the regulations have to be revised. Experiences, the comparison with other education and training systems and international developments were compiled and evaluated The responsible expert group with participants from authorities and instructors decided that no fundamental changes are necessary. In the contribution two items are discussed: The mandatory external consulting of licensees by acknowledged radiation protection experts - as required by the EU BSS (basic safety standards) with the definition of a radiation protection expert (RPE) - bears more disadvantages than advantages. On the other hand the improvement potential with respect to clearness and courtesy of requirements for radiation protection education and training in Switzerland were considered in the frame of WU-BSS revision.

  5. The development of NPP operational safety training courses

    International Nuclear Information System (INIS)

    Lee, Chang Kun; Lee, Duk Sun; Lee, Byung Sun; Lee, Won Koo; Juhn, Heng Run; Moon, Byung Soo; Cho, Min Sik; Lee, Han Young; Moon, Hak Won; Seo, Yeon Ho

    1987-12-01

    The objective of the project is to develop a training course text for the betterment of reactor operation and assurance of its safety in general by providing training materials of the advanced compact nuclear simulator which will become operation in September 1988. Main scope and contents of the project are as follows: - compilation of basic data related to simulator operation and maintenance as well as the comparative analysis with respect to simulator materials in foreign countries - method of training by simulator - review the training status by simulator in foreign countries - development of training course in the field of reactor safety It is expected that the results will be reflected to the actual training and retraining of the reactor operating crew so as to improve and update their capabilities in training fashion. (Author)

  6. Radiation safety of Takasaki ion accelerators for advanced radiation in JAERI

    International Nuclear Information System (INIS)

    Watanabe, Hiromasa; Tanaka, Susumu; Anazawa, Yutaka

    1991-01-01

    Building layout of Takasaki ion accelerator facility has been started since 1987, with the propulsion of research development of (1) cosmetic environment materials, (2) nuclear fusion reactors, (3) biotechnology, and (4) new functional materials. This paper deals with an AVF cyclotron and a tandem type accelerator, focusing on safety design, radiation safety management, and radioactive waste management. Safety design is discussed in view of radiation shielding and activation countermeasures. Radiation safety management covers radiation monitoring in the workplace, exhaust radioactivity, environment outside the facility, and the other equipments; personal monitoring; and protective management of exposure. For radiation waste management, basic concept and management methods are commented on. (N.K.)

  7. Radiation protection and safety guide no. GRPB-G-1: qualification and certification of radiation protection personnel

    International Nuclear Information System (INIS)

    Schandorf, C.; Darko, O.; Yeboah, J.; Osei, E.K.; Asiamah, S.D.

    1995-01-01

    A number of accidents with radiation sources are invariably due to human factors. The achievement and maintenance of proficiency in protection and safety in working with radiation devices is a necessary prerequisite. This guide specifies the national scheme and minimum requirements for qualification and certification of radiation protection personnel. The objective is to ensure adequate level of skilled personnel by continuous upgrading of knowledge and skill of personnel. The following sectors are covered by this guide: medicine, industry, research and training, nuclear facility operations, miscellaneous activities

  8. Radiation protection and safety aspects in the use of radiation in medicine, industry and research

    International Nuclear Information System (INIS)

    Bhatt, B.C.

    1998-01-01

    While ionizing radiations have significant and indispensable uses in several fields, it must be borne in mind that it may be harmful to the radiation workers and public if used indiscriminately and without due caution. Radiation doses received by these individuals should be kept well within the recommended limits through good work practices. It is therefore necessary to ensure safety of radiation workers, patients undergoing radiation diagnosis and treatment, public and environment so that maximum benefit is derived from the use of radiation with minimum and acceptable risk. General principles of radiation protection and safety in various applications of radiations are discussed

  9. Ordinance on the Implementation of Atomic Safety and Radiation Protection

    International Nuclear Information System (INIS)

    1984-01-01

    In execution of the new Atomic Energy Act the Ordinance on the Implementation of Atomic Safety and Radiation Protection was put into force on 1 February 1985. It takes into account all forms of peaceful nuclear energy and ionizing radiation uses in nuclear installations, irradiation facilities and devices in research, industries, and health services, and in radioactive isotope production and laboratories. It covers all aspects of safety and protection and defines atomic safety as nuclear safety and nuclear safeguards and physical protection of nuclear materials and facilities, whereas radiation protection includes the total of requirements, measures, means and methods necessary to protect man and the environment from the detrimental effects of ionizing radiation. It has been based on ICRP Recommendation No. 26 and the IAEA's Basic Safety Standards and supersedes the Radiation Protection Ordinance of 1969

  10. Report of the Study Group on Safety of RI and Radiation Uses

    International Nuclear Information System (INIS)

    Yamazaki, Fumio

    1977-01-01

    To grasp the present state of RI and radiation usages, a survey by questionnaire was made on the enterprises using small sealed radiation sources, the enterprises carrying out nondestructive tests with large radiation sources and the medical institutions utilizing RIs and radiation. The results of the study aiming at establishing the reasonable and adequate measures of safety management are described together with the survey results. The items studied are the legal regulations, facilities, education and training of workers, and radioactive waste management. (Mori, K.)

  11. Accredited training on radiation protection for the Austrian police

    International Nuclear Information System (INIS)

    Timal, G.

    2009-01-01

    In Austria, radiological emergencies are handled following the Intervention Regulation, in force since 2007. This regulation also defines duration and content for the training of radiation protection personnel, taking advantage of the standard OeNORM S 5207 published in 2005. Radiation protection personnel of the Austrian police are trained at the Federal Security Academy in Traiskirchen near Vienna. The Federal Security Academy is a training centre certified by the Austrian Standards Institute. The poster describes the modular organisation of the training and its duration and content as well as the further trainings available to the radiation protection personnel of the Police. (orig.)

  12. The main goals and principles of nuclear and radiation safety

    International Nuclear Information System (INIS)

    Huseynov, V.

    2015-01-01

    The use of modern radiation technology expands in various fields of human activity. The most advanced approach, methods and technologies and also radiation technologies are of great importance in industrial, medical, agricultural, construction, science, education, and etc. areas of the fastest growing Azerbaijan Republic. Ensuring of nuclear and radiation safety, safety standards, main principles and conception of safety play a crucial role. The following ten principles are taken as a basis to ensure safety measures. 1. Responsible for ensuring safety; 2. The role of government; 3. Leadership and management of security interests; 4. Devices and justification of activity; 5. Optimization of preservation; 6. Limiting of risks for physical persons; 7. The protection of present and future generations; 8. The prevention of accidents; 9. Emergency preparedness and response; 10. Reducing of risks of existing and unregulated radiation protection measures. The safety principles are applied together

  13. A case for safety leadership team training of hospital managers.

    Science.gov (United States)

    Singer, Sara J; Hayes, Jennifer; Cooper, Jeffrey B; Vogt, Jay W; Sales, Michael; Aristidou, Angela; Gray, Garry C; Kiang, Mathew V; Meyer, Gregg S

    2011-01-01

    Delivering safe patient care remains an elusive goal. Resolving problems in complex organizations like hospitals requires managers to work together. Safety leadership training that encourages managers to exercise learning-oriented, team-based leadership behaviors could promote systemic problem solving and enhance patient safety. Despite the need for such training, few programs teach multidisciplinary groups of managers about specific behaviors that can enhance their role as leadership teams in the realm of patient safety. The aims of this study were to describe a learning-oriented, team-based, safety leadership training program composed of reinforcing exercises and to provide evidence confirming the need for such training and demonstrating behavior change among management groups after training. Twelve groups of managers from an academic medical center based in the Northeast United States were randomly selected to participate in the program and exposed to its customized, experience-based, integrated, multimodal curriculum. We extracted data from transcripts of four training sessions over 15 months with groups of managers about the need for the training in these groups and change in participants' awareness, professional behaviors, and group activity. Training transcripts confirmed the need for safety leadership team training and provided evidence of the potential for training to increase targeted behaviors. The training increased awareness and use of leadership behaviors among many managers and led to new routines and coordinated effort among most management groups. Enhanced learning-oriented leadership often helped promote a learning orientation in managers' work areas. Team-based training that promotes specific learning-oriented leader behaviors can promote behavioral change among multidisciplinary groups of hospital managers.

  14. Experience with performance based training of nuclear criticality safety engineers

    International Nuclear Information System (INIS)

    Taylor, R.G.

    1993-01-01

    For non-reactor nuclear facilities, the U.S. Department of Energy (DOE) does not require that nuclear criticality safety engineers demonstrate qualification for their job. It is likely, however, that more formalism will be required in the future. Current DOE requirements for those positions which do have to demonstrate qualification indicate that qualification should be achieved by using a systematic approach such as performance based training (PBT). Assuming that PBT would be an acceptable mechanism for nuclear criticality safety engineer training in a more formal environment, a site-specific analysis of the nuclear criticality safety engineer job was performed. Based on this analysis, classes are being developed and delivered to a target audience of newer nuclear criticality safety engineers. Because current interest is in developing training for selected aspects of the nuclear criticality safety engineer job, the analysis is incompletely developed in some areas

  15. Virtual reality for mine safety training.

    Science.gov (United States)

    Filigenzi, M T; Orr, T J; Ruff, T M

    2000-06-01

    Mining has long remained one of America's most hazardous occupations. Researchers believe that by developing realistic, affordable VR training software, miners will be able to receive accurate training in hazard recognition and avoidance. In addition, the VR software will allow miners to follow mine evacuation routes and safe procedures without exposing themselves to danger. This VR software may ultimately be tailored to provide training in other industries, such as the construction, agricultural, and petroleum industries.

  16. Safety training parks – A case study on the effectiveness of the trainings

    DEFF Research Database (Denmark)

    Räsänen, Tuula; Sormunen, E.; Reiman, Arto

    The Safety Training Park (STP) concept is a unique Finnish safety training innovation. The STP provides different actors of the construction industry and other branches a practical occupational safety and health (OSH) training area. To the authors’ knowledge, no such parks exist in Europe besides...... Finland. Objec-tive was to study the effectiveness of the STP trainings at a large case company which participated in this study and which has actively trained its personnel in the park. The study was conducted from February 2015 to Feb-ruary 2017. Several key success factors were identified...... in the interviews of this case study. In addition, the company OSH statistics (2010 – 2016) showed a positive development at safety level. However, The Nordic Safety Climate Questionnaire did not show any significant change of results in a one year period. According to the results of the group interviews...

  17. Proceedings of the 6. Argentine congress on radiation protection and nuclear safety

    International Nuclear Information System (INIS)

    1998-01-01

    The 6th Argentine Congress on Radiation Protection and Nuclear Safety was organized by the Radioprotection Argentine Society, in Buenos Aires, between the 22 and 24 of september of 1998. In this event, were presented almost 66 papers in the following sessions, about these subjects: 1.- Safety in nuclear installations. 2.- Control of nuclear material and physical protection of nuclear installations. 3.- Programs of quality assurance. 4.- Training, technical information and public information. 5.- Physical dosimetry. 6.- Physical dosimetry and occupational radiation protection. 7.- Exposure of the natural radiation. 8.- Environmental radiological safety. 9.- Biological effects of the ionizing radiations and biological dosimetry. 10.- Radiological protection of the medical practice and the radiological emergencies. 11.- Radioactive wastes management. 12.- Transport of radioactive materials

  18. Radiation Protection, Safety and Security Issues in Ghana.

    Science.gov (United States)

    Boadu, Mary; Emi-Reynolds, Geoffrey; Amoako, Joseph Kwabena; Akrobortu, Emmanuel; Hasford, Francis

    2016-11-01

    Although the use of radioisotopes in Ghana began in 1952, the Radiation Protection Board of Ghana was established in 1993 and served as the national competent authority for authorization and inspection of practices and activities involving radiation sources until 2015. The law has been superseded by an Act of Parliament, Act 895 of 2015, mandating the Nuclear Regulatory Authority of Ghana to take charge of the regulation of radiation sources and their applications. The Radiation Protection Institute in Ghana provided technical support to the regulatory authority. Regulatory and service activities that were undertaken by the Institute include issuance of permits for handling of a radiation sources, authorization and inspection of radiation sources, radiation safety assessment, safety assessment of cellular signal towers, and calibration of radiation-emitting equipment. Practices and activities involving application of radiation are brought under regulatory control in the country through supervision by the national competent authority.

  19. Regulation on Radiation Safety of Guatemala

    International Nuclear Information System (INIS)

    2001-03-01

    This regulation includes all the requirements administrative, radiation protection, that licensees must meet in order to obtain authorization from the competent authority to apply and use radiation sources, equipment emiting ionizing radiation in different practices authorized

  20. Nuclear safety and radiation protection in the German Democratic Republic

    International Nuclear Information System (INIS)

    Sitzlack, G.; Scheel, H.

    1976-01-01

    The radiation protection organization in the GDR is outlined laying emphasis on the tasks of the National Board of Nuclear Safety and Radiation Protection. In addition to the basic tasks, the various forms of radiation protection monitoring, the management of radioactive wastes, and international responsibilities are briefly explained. (author)

  1. NPP safety and personnel training. XII International conference. Abstracts

    International Nuclear Information System (INIS)

    2011-01-01

    The 12th International conference NPP Safety and Personnel Training took place in Obninsk, October 4-7, 2011. The issues of nuclear technologies safety are considered.The problems of life-cycle management of nuclear facilities are discussed. The criteria of assessment of physical protection systems of nuclear facilities are presented [ru

  2. Health and Safety Legislation in Australia: Complexity for Training Remains

    Science.gov (United States)

    Bahn, Susanne; Barratt-Pugh, Llandis

    2014-01-01

    This paper presents the findings from a study that examined the impact of the National Occupational Health and Safety Strategy 2002-2012 and the harmonisation of the Work Health and Safety Act 2011 on Australian training design, delivery and outcomes. There has been a comparative reduction in work related injuries, fatalities and disease, and…

  3. Demonstration of the LHC Safety Training Tunnel Mock-Up

    CERN Multimedia

    Brice, Maximilien

    2014-01-01

    Members of CERN's management visit the LHC tunnel mock-up at the Safety Training Centre on the Prévessin site. The facility is used to train personnel in emergency responses including the use of masks and safe evacuation.

  4. Classroom instruction versus roadside training in traffic safety education

    NARCIS (Netherlands)

    van Schagen, I; Rothengatter, J.A.

    1997-01-01

    This study compares the effectiveness of different approaches to training complex cognitive and psychomotor skills within the framework of road safety education for primary school children. A method involving roadside behavioral training, a classroom instruction method and a method combining these

  5. IAEA education and training programme in nuclear safety

    International Nuclear Information System (INIS)

    Bastos, J.L.F.; Lederman, L.

    2003-01-01

    This paper presents the IAEA education and training (E and T) programme in nuclear safety. A strategic planning for the programme implementation is described in terms of objectives, outputs and activities. A framework based on areas of competency and the level of depth of the training is presented as well as the main achievements to date. (author)

  6. Training in radiation protection given to personnel of nuclear power plants

    International Nuclear Information System (INIS)

    Brosson, M.; Lambinon, Y.

    1977-01-01

    Any action undertaken in technical training must aim at mastering the know-how appropriate to the work to be done. To develop a training program in radiation protection intended for persons who work in radioactive areas it is necessary to analyze the tasks corresponding to the work to be done then to install the means required to implement them. Evaluating the hazards (second stage training) is the sole responsibility of those in charge of work safety assisted where necessary by a specialist on specific hazard (specialized training). But all the staff, knowing the risks involved, must know how to protect themselves (first-stage training). Stage I and 2 trainings are given in site and call for specific teaching methods. It was necessary to create a further training course for them known as stage 3 training to prepare the instructors [fr

  7. A study on enforcement effects of radiation safety control regulations for diagnostic X-ray equipment

    International Nuclear Information System (INIS)

    Sung, Mo IL; Park, Myeong Hwan; Kwon, Duk Moon; Lee, Joon IL

    1999-01-01

    The purposes of this study are to analyze the realities after enforcements of safety control regulations for diagnostic X-ray equipment and to suggest means for an improvement of low radiation safety control. A questionnaire survey for medical radiologic technologists was carried out to determine enforcement effects of the safety control regulations. The results of analysis from the survey are as follows. That is, most of he respondents realized the importance of the radiation safety control system, but about a half of them revealed that regulations were not well observed in accordance with their purposes. Only 43.9 percent of the respondents took an active part in quality control of radiation. And responsibility, sex, age, and knowledge for safety control were important indicators for observations of the regulations. Training for the safety control regulations are needed to ensure safety control and proper usage of diagnostic X-ray equipment. And management of organizations using diagnostic X-ray equipment have to understand and stress the importance of radiation safety control system. (author)

  8. Radiation Safety Culture in Medicine AFROSAFE_R_A_D

    International Nuclear Information System (INIS)

    Nyabanda, R.

    2017-01-01

    Ionizing radiation that include X-rays and Gamma rays Radio waves, infrared and visible light carries sufficient energy to free electrons from atoms or molecules. Becquerel first person to discover evidence of radioactivity, who shared a Nobel Prize for physics in 1903 with Marie and Pierre Curie. Prof Sievert and Louis Harold Gray are the Medical physicists who had major contribution in the study of the biological effects of radiation. Ionizing radiation causes displacement of an electron which can inflict damage on DNA either directly or indirectly. A radiation-safety campaign developed by the radiation health workers in Africa. Radiosensitive organs is highest in cells which are highly mitotic or undifferentiated. E.g basal epidermis, bone marrow, thymus, gonads, and lens cells. Relatively low radiosensitivity in muscle, bones, and nervous system tissues. A radiation-safety campaign developed by the radiation health workers in Africa. AFROSAFE Strategies Strengthen radiation protection of patients, health workers and public, Promote safe and appropriate use of ionizing radiation in medicine. Foster improvement of the benefit-risk dialogue with patients and the public. Enhance the safety and quality of radiological procedures in medicine, Promote safety in radiological equipment and facilities and Promote research in radiation protection and safety

  9. The new system of education and training of medical staff in radiation protection in Albania

    International Nuclear Information System (INIS)

    Grillo, B.; Preza, K.; Titka, V.; Shehi, G.

    2001-01-01

    The present situation as regarding the education and training of medical staff in radiological protection is discussed. In particular the protection of patients, children and pregnant women were the most sensible topics in some courses held in recent years. Emphasis is given on a number of courses and course units dealing with radiation safety problems in the medical field and their content. (author)

  10. EDF - The Inspector General's report on Nuclear Safety and Radiation Protection 2012

    International Nuclear Information System (INIS)

    2013-01-01

    After a first chapter in which the Inspector General states his own vision of facts and results regarding nuclear safety and radiation protection for 2012, the next chapters address the following topics: the contrasted results of nuclear operating safety, the need to remain vigilant in nuclear safety management, the challenge of occupational safety, the need of new ambitious goals for radiation protection, an updated training which must be better led by line management, maintenance as a strategic issue, the long road ahead for nuclear technical information system (SDIN), the need of better attention to chemistry in operations, the new impetus of EPRs, plant life extension conditioned by nuclear safety, the mobilization of nuclear operators after Fukushima, and noteworthy operating events

  11. Developing a training programme for radiation protection officers at industrial irradiators

    International Nuclear Information System (INIS)

    Davor, P.

    2013-04-01

    A training programme for staff of irradiation facilities especially radiation safety officers at industrial irradiation facilities has been developed. The programme focused on technical and administrative basis for ensuring radiation safety at the practices. It consists of thirteen modules ranging from fundamentals of radiation, biological effects of ionizing radiation as well as the technical and administrative issues pertinent to radiation safety of the sources. The overall objective of this programme was to build competence in the area of radiation protection and raise the confidence level of staff of industrial irradiation facilities. The modules are structured in a manner that attempts to give a good understanding to participants on safety features of irradiators and use of radiation monitoring equipment. Each module has specific objectives and expected outcome and the course content is also stated under each module. The duration of the whole programme is sixteen weeks and the participants are expected to have some working knowledge in radiation protection and safe use of radiation sources. (au)

  12. Environment, safety and health training catalog

    International Nuclear Information System (INIS)

    Hurley, L.; Brittenham, P.

    1991-12-01

    The ES ampersand H Training Catalog is a tool to assist managers in determining which training courses they require their employees to complete. The narrative description under ''Who Shall Attend'' describes the characteristics of the employees and contractors under the direction of Sandia who are required by law, regulation, DOE Order, or SNL Directive to complete the training in order to be in compliance. The narrative is ''Who Should Attend'' describes the individuals for which the course is 'highly recommended,'' although they are not mandated to attend

  13. Personnel radiation safety in nuclear power plants

    International Nuclear Information System (INIS)

    Elkert, J.

    1979-05-01

    The principal contributions to the radiation doses of the Swedish power reactor personnel are identified. The possi bilities to reduce these doses are examined. The radiation doses are analyzed according to different personnel categories, specific maintenance operations or inspections and to different radiation activities. Suggestions are given for reducing the radiation doses. (L.E.)

  14. Nuclear Criticality Safety Organization training implementation. Revision 4

    Energy Technology Data Exchange (ETDEWEB)

    Carroll, K.J.; Taylor, R.G.; Worley, C.A.

    1997-05-19

    The Nuclear Criticality Safety Organization (NCSO) is committed to developing and maintaining a staff of qualified personnel to meet the current and anticipated needs in Nuclear Criticality Safety (NCS) at the Oak Ridge Y-12 Plant. This document provides a listing of the roles and responsibilities of NCSO personnel with respect to training and details of the Training Management System (TMS) programs, Mentoring Checklists and Checksheets, as well as other documentation utilized to implement the program. This Training Implementation document is applicable to all technical and managerial NCSO personnel, including temporary personnel, sub-contractors and/or LMES employees on loan to the NCSO, who are in a qualification program.

  15. Nuclear Criticality Safety Organization training implementation. Revision 4

    International Nuclear Information System (INIS)

    Carroll, K.J.; Taylor, R.G.; Worley, C.A.

    1997-01-01

    The Nuclear Criticality Safety Organization (NCSO) is committed to developing and maintaining a staff of qualified personnel to meet the current and anticipated needs in Nuclear Criticality Safety (NCS) at the Oak Ridge Y-12 Plant. This document provides a listing of the roles and responsibilities of NCSO personnel with respect to training and details of the Training Management System (TMS) programs, Mentoring Checklists and Checksheets, as well as other documentation utilized to implement the program. This Training Implementation document is applicable to all technical and managerial NCSO personnel, including temporary personnel, sub-contractors and/or LMES employees on loan to the NCSO, who are in a qualification program

  16. Occupational safety and health education and training for underserved populations.

    Science.gov (United States)

    O'Connor, Tom; Flynn, Michael; Weinstock, Deborah; Zanoni, Joseph

    2014-01-01

    This article presents an analysis of the essential elements of effective occupational safety and health education and training programs targeting underserved communities. While not an exhaustive review of the literature on occupational safety and health training, the paper provides a guide for practitioners and researchers to the key factors they should consider in the design and implementation of training programs for underserved communities. It also addresses issues of evaluation of such programs, with specific emphasis on considerations for programs involving low-literacy and limited-English-speaking workers.

  17. A survey of food safety training in small food manufacturers.

    Science.gov (United States)

    Worsfold, Denise

    2005-08-01

    A survey of food safety training was conducted in small food manufacturing firms in South Wales. Structured interviews with managers were used to collect information on the extent and level of food hygiene and HACCP training and the manager's perceptions of and attitude towards training. All the businesses surveyed had undertaken some hygiene training. Hygiene induction programmes were often unstructured and generally unrecorded. Low-risk production workers were usually trained on the job whilst high-care production staff were trained in hygiene to Level 1. Part-time and temporary staff received less training than full-timers. Regular refresher training was undertaken by less than half of the sample. None of the businesses made use of National Vocational Qualification (NVQ) qualifications. Over half of the managers/senior staff had undertaken higher levels of hygiene training and half had attended a HACCP course. Managers trained the workforce to operate the HACCP system. Formal training-related activities were generally only found in the larger businesses. Few of the manufacturers had made use of training consultants. Managers held positive attitudes towards training but most regarded it as operating expense rather than an investment. Resource poverty, in terms of time and money was perceived to be a major inhibiting factor to continual, systematic training.

  18. Towards a radiation safety culture at Universidad Nacional de Colombia

    International Nuclear Information System (INIS)

    Poveda, Jairo F.; Munera, Hector A.

    2008-01-01

    Full text: During the 20th century, nuclear and radiation techniques for research, teaching, and medical and engineering practice slowly appeared at the National University of Colombia, mainly at the Bogota, Medellin and Manizales branches. Each individual laboratory or researcher obtained the license for the use of the radioactive source, or radiation emitting apparatus. However, the University as a whole does not have as yet a Radiation Safety Manual, nor an inventory of laboratories using radiation. From the viewpoint of radiation safety and culture, this situation is undesirable, and may easily lead to inappropriate waste management practices, including the possibility of orphan sources (one such source has been already found). As part of the program of environmental management of dangerous wastes promoted by the National Division of Laboratories of our University, an office of radiation safety was created in the year 2006. This paper describes the situation that was found, the activities that have been carried out, some of the difficulties that we have met, and the plans that we have to help shape a safety culture at our institution. Currently we are pursuing an inventory of laboratories using radioactive sources and radiation emitting apparatuses, starting with the branches in Bogota and Manizales which are perceived as the most urgent to deal with. Fortunately, the branch in Medellin has been for about a decade under the care of a former radiation safety officer of our national Institute of Nuclear Affairs, who presently teaches there. During 2006 and 2007, 13 laboratories using radioactive sources were visited in the Bogota branch. Safety procedures and waste handling protocols were checked, safety manuals prepared and/or revised, and recommendations for safety culture provided. During 2008 we will visit Manizales, and will continue visiting a number of X-ray machines used in the Bogota branch for engineering, veterinary, and diagnostic, and surgery medical

  19. Challenges in strengthening radiation safety and security programme in Malaysia

    International Nuclear Information System (INIS)

    Noriah, M.A.

    2010-01-01

    This paper illustrates the Malaysian experience in implementing steps in strengthening radiation safety and security through certification of radiation safety personnel, which is dedicated to meet the current and future needs in sustainability of radiation safety and security systems. Commitment from the workforce to treat safety as a priority and the ability to turn a requirement into a practical language is also important in implementing the radiation safety policy efficiently. Through this effort, we are able to create a basis for adequate protection of workers, the public and the environment and encourage licensees to manage radiation safety and security based on performance, and not on compliance culture, with the final objective of professing a safety culture through self regulation. This will certainly benefit an organisation with ultimate goals are to continuously strive for a healthy, accident free and environmentally sound workplace and community, while providing the technical support needed to meet the national mission. This will strengthen the radiation safety and security programme and could be used to assist in manpower development once Malaysia makes the decision to embark on a nuclear power programme. (author)

  20. The recognition of radiation protection training as a professional specialty

    International Nuclear Information System (INIS)

    Touzet, R. E.

    2003-01-01

    After Chernobyl accident, the radiation protection training was recognized as a professional specialty. To improve this training we focussed the project in 3 points: - The recognition of radiation protective in the legislation. - Stablishment of minimum programs - Different categories: nuclear facilities, radioisotopes and radiopharmaceuticals

  1. YK1 Basic professional training course on nuclear safety, Finland

    International Nuclear Information System (INIS)

    Kyrki-Rajamaeki, R.

    2005-01-01

    In the fall of 2002, Finnish organizations re-evaluated the manpower situation and established an organizing committee to develop and organize basic post-graduate professional training of new recruits and staff members; especially for the acute needs of the new NPP project, but also to provide in the long-term a new generation of nuclear experts to replace the present generation which will retire within the next ten years. The organizing committee included representatives of the following organizations: Radiation and Nuclear Safety Authority STUK, nuclear power utilities TVO and Fortum, the Technical Research Centre of Finland VTT, the Lappeenranta and Helsinki Universities of Technology, LUT and HUT, respectively, and the Ministry of Trade and Industry, KTM. The committee decided to promptly organize a national training course on nuclear safety based on a similar course developed by the IAEA: the course structure and syllabus are alike. Although part of the course material is based on the IAEA material, it has been adapted to the Finnish conditions, and a large part of the material is completely new. The Finnish application was developed in order to make visible different standpoints of all organizations. The location of the first six-week course YK1 from September 2003 to February 2004 rotated between different organizations. There were altogether 120 lecturers and rehearsal, demonstration or excursion leaders. Half of them came from the utilities TVO and Fortum, a quarter from the authority STUK, and the rest from VTT, universities and others. The 51 participants of the course came from these same organisations. The lectures were held in Finnish, and the slides in Finnish were distributed to the participants. However, it is useful and even mandatory to know the terms also in English, and therefore the extended abstracts of the lectures were written in English. The YK1 course material was laid on the website of LUT to look for in advance or in more detail with

  2. YK1 Basic professional training course on nuclear safety, Finland

    International Nuclear Information System (INIS)

    Kyrki-Rajamaeki, R.

    2005-01-01

    In the fall of 2002, Finnish organizations re-evaluated the manpower situation and established an organizing committee to develop and organize basic post-graduate professional training of new recruits and staff members; especially for the acute needs of the new NPP project, but also to provide in the long-term a new generation of nuclear experts to replace the present generation which will retire within the next ten years. The organizing committee included representatives of the following organizations: Radiation and Nuclear Safety Authority STUK, nuclear power utilities TVO and Fortum, the Technical Research Centre of Finland VTT, the Lappeenranta and Helsinki Universities of Technology, LUT and HUT, respectively, and the Ministry of Trade and Industry, KTM. The committee decided to promptly organize a national training course on nuclear safety based on a similar course developed by the IAEA: the course structure and syllabus are alike. Although part of the course material is based on the IAEA material, it has been adapted to the Finnish conditions, and a large part of the material is completely new. The Finnish application was developed in order to make visible different standpoints of all organizations. The location of the first six-week course YK1 from September 2003 to February 2004 rotated between different organizations. There were altogether 120 lecturers and rehearsal, demonstration or excursion leaders. Half of them came from the utilities TVO and Fortum, a quarter from the authority STUK, and the rest from VTT, universities and others. The 51 participants of the course came from these same organisations. The lectures were held in Finnish, and the slides in Finnish were distributed to the participants. However, it is useful and even mandatory to know the terms also in English, and therefore the extended abstracts of the lectures were written in English. The YK1 course material was laid on the website of LUT to look for in advance or in more detail with

  3. Management commitment to safety vs. employee perceived safety training and association with future injury.

    Science.gov (United States)

    Huang, Yueng-Hsiang; Verma, Santosh K; Chang, Wen-Ruey; Courtney, Theodore K; Lombardi, David A; Brennan, Melanye J; Perry, Melissa J

    2012-07-01

    The purpose of this study is to explore and examine, specific to the restaurant industry, two important constructs emerging from the safety climate literature: employee perceptions of safety training and management commitment to safety. Are these two separate constructs? Are there both individual- and shared group-level safety perceptions for these two constructs? What are the relationships between these two constructs and future injury outcomes? A total of 419 employees from 34 limited-service restaurants participated in a prospective cohort study. Employees' perceptions of management commitment to safety and safety training and demographic variables were collected at the baseline. The survey questions were made available in three languages: English, Spanish, and Portuguese. For the following 12 weeks, participants reported their injury experience and weekly work hours. A multivariate negative binomial generalized estimating equation model with compound symmetry covariance structure was used to assess the association between the rate of self-reported injuries and measures of safety perceptions. Even though results showed that the correlation between employees'perceived safety training and management commitment to safety was high, confirmatory factor analysis of measurement models showed that two separate factors fit the model better than as two dimensions of a single factor. Homogeneity tests showed that there was a shared perception of the factor of management commitment to safety for the restaurant workers but there was no consistent perception among them for the factor of perceived safety training. Both individual employees'perceived management commitment to safety and perceptions of safety training can predict employees' subsequent injuries above and beyond demographic variables. However, there was no significant relationship between future injury and employees' shared perception of management commitment to safety. Further, our results suggest that the

  4. Safety Training and Awareness: a team at your service

    CERN Multimedia

    HSE Unit

    2014-01-01

    Ever wondered who is on the other end of the safety-training@cern.ch e-mail address? If so, you might like to know that all the activities relating to safety training and awareness (“Safety Training" for short) are managed by a team dedicated to ensuring the smooth running of CERN’s safety training courses.    Photo: Christoph Balle. This team currently consists of five people: the manager in charge of coordinating all the projects, two administrative assistants who provide logistical support and two technicians who manage the training centre. This team, which has seen its workload and the number of challenges it faces increase considerably with LS1, is responsible for organising classroom training sessions (in partnership with some 15 training bodies) and for the management of online e-learning courses in partnership with the GS-AIS Group. The members of the team don't just deal with enrolment on the courses: they also help with the development...

  5. 10. Latin American Regional Congress IRPA Protection and Radiation Safety

    International Nuclear Information System (INIS)

    2015-01-01

    The 10.Latin American Regional Congress IRPA Protection and Radiation Safety was organized by the Radioprotection Argentine Society, in Buenos Aires, between the april 12 and 17, 2015. In this event, were presented almost 400 papers about these subjects: radiation protection in medicine and industry; radiological and nuclear emergencies; NORM (Natural Occurring Radioactive Materials); reactors; radiation dosimetry; radiotherapy; non-ionizing radiations; policies and communications; etc.

  6. Radiation sources safety and radioactive materials security regulation in Ukraine

    International Nuclear Information System (INIS)

    Smyshliaiev, A.; Holubiev, V.; Makarovska, O.

    2001-01-01

    Radiation sources are widely used in Ukraine. There are about 2500 users in industry, science, education and about 2800 in medicine. About 80,000 sealed radiation sources with total kerma-equivalent of 450 Gy*M 2 /sec are used in Ukraine. The exact information about the radiation sources and their users will be provided in 2001 after the expected completion of the State inventory of radiation sources in Ukraine. In order to ensure radiation source safety in Ukraine, a State System for regulation of activities dealing with radiation sources has been established. The system includes the following elements: establishment of norms, rules and standards of radiation safety; authorization activity, i.e. issuance of permits (including those in the form of licences) for activities dealing with radiation sources; supervisory activity, i.e. control over observance of norms, rules and standards of radiation safety and fulfilment of conditions of licences for activities dealing with radiation sources, and also enforcement. Comprehensive nuclear legislation was developed and implemented from 1991 to 2000. Radiation source safety is regulated by three main nuclear laws in Ukraine: On the use of nuclear energy and radiation safety (passed on 8 February 1995); On Human Protection from Impact of Ionizing Radiation (passed on 14 January 1998); On permissive activity in the area of nuclear energy utilization (passed on 11 January 2000). The regulatory authorities in Ukraine are the Ministry for Ecology and Natural Resources (Nuclear Regulatory Department) and the Ministry of Health (State sanitary-epidemiology supervision). According to the legislation, activities dealing with radiation sources are forbidden without an officially issued permit in Ukraine. Permitted activities with radiation sources are envisaged: licensing of production, storage and maintenance of radiation sources; licensing of the use of radiation sources; obligatory certification of radiation sources and transport

  7. Radiation safety and regulatory aspects in Medical Facilities

    International Nuclear Information System (INIS)

    Banerjee, Sharmila

    2017-01-01

    Radiation safety and regulatory aspect of medical facilities are relevant in the context where radiation is used in providing healthcare to human patients. These include facilities, which carry out radiological procedures in diagnostic radiology, including dentistry, image-guided interventional procedures, nuclear medicine, and radiation therapy. The safety regulations provide recommendations and guidance on meeting the requirements for the safe use of radiation in medicine. The different safety aspects which come under its purview are the personnel involved in medical facilities where radiological procedures are performed which include the medical practitioners, radiation technologists, medical physicists, radiopharmacists, radiation protection and over and above all the patients. Regulatory aspects cover the guidelines provided by ethics committees, which regulate the administration of radioactive formulation in human patients. Nuclear medicine is a modality that utilizes radiopharmaceuticals either for diagnosis of physiological disorders related to anatomy, physiology and patho-physiology and for diagnosis and treatment of cancer

  8. A National Institute of Radiation Protection and Nuclear Safety?

    International Nuclear Information System (INIS)

    Hartley, B.M.

    1993-01-01

    The practice of radiation protection within Australia is fragmented on a number of different levels. Each state has its own radiation protection organisation. Within the Commonwealth there is also a large number of bodies which deal with different aspects of radiation protection or nuclear safety. There is also an interest in occupational radiation protection by Departments responsible for Occupational Health and Safety. It is estimated that this fragmentation affects the practice of radiation protection at a State level and also the role which Australia can play internationally. The establishment of a National Institute of Radiation Protection and Nuclear Safety is therefore proposed. Possible structures and organizational arrangements for such an institute are discussed. 4 refs., 4 tabs., 3 figs

  9. Nuclear safety and radiation protection in France in 2011

    International Nuclear Information System (INIS)

    2012-01-01

    The first part of this voluminous report describe the different ASN (Nuclear Safety Authority) actions: nuclear activities (ionising radiation and health and environmental risks), principles and stakeholders in nuclear safety regulation, radiation protection and protection of the environment, regulation, regulation of nuclear activities and exposure to ionizing radiation, radiological emergencies, public information and transparency, international relations. It also gives an overview of nuclear safety and radiation protection activities in the different French regions. The second part addresses activities regulated by the ASN: medical uses of ionizing radiation, non-medical uses of ionizing radiation, transport of radioactive materials, nuclear power plants, nuclear fuel cycle installations, nuclear research facilities and various nuclear installations, safe decommissioning of basic nuclear installations, radioactive waste and contaminated sites and soils

  10. The regulatory evaluation of radiation protection training programmes at Canadian nuclear power plants

    International Nuclear Information System (INIS)

    Legare, M.; Tennant, D.

    1996-01-01

    The responsibility for providing the necessary assurance that the use of nuclear energy in Canada does not pose undue risk to health, safety, security and the environment is vested with the Atomic Energy Control Board (AECB). This responsibility has led the Operator Certification Division of the AECB to develop methods to obtain assurance that nuclear power plant operations personnel are well trained and adequately competent to perform their duties. The features of the AECB approach to evaluation of training programmes based on a systematic approach to training is described. An overview of the Canadian nuclear power plants' radiation protection qualification levels is given. The developing evaluation process is contributing to the improvement of licensee radiation protection training programmes. This is making possible the transfer of part of the responsibility for licensed personnel radiation protection qualification assessment to the licensees, thus enabling a reduction in the operator certification division formal qualification activities. (author)

  11. Sweden's Cooperation with Eastern Europe in Radiation Safety 2010

    International Nuclear Information System (INIS)

    Van Dassen, Lars; Andersson, Sarmite; Bejarano, Gabriela

    2011-09-01

    The Swedish Radiation Safety Authority implemented in 2010 cooperation projects in Russia, Ukraine, Georgia, Armenia, Lithuania and Moldova based on instructions from the Swedish Government and agreements with the European Union and the Swedish International Development Cooperation Agency, SIDA. The projects aim at achieving a net contribution to radiation safety (including nuclear safety, nuclear security and non-proliferation as well as radiation protection and emergency preparedness) for the benefit of the host country as well as Sweden. This report gives an overview of all the projects implemented in 2010

  12. Measurement techniques and safety culture in radiation protection -reflections after 37 years of occupation with measuring instruments

    International Nuclear Information System (INIS)

    Maushart, R.

    1994-01-01

    Safety Culture in radiation use and radiation protection implies primarily knowledge and competence of the decision makers. As the measuring techniques are basic for practical radiation protection, only such person can be called competent who has sufficient expertise on measuring techniques, and is able to evaluate its application and results. Safety Culture also implies the readiness to expose errors, and to learn from them. ''Believing in infallibility'' excludes Safety Culture. Therefore, correctly applied measuring technique contributes to recognize weak points early. How far it is used consciously and actively to prevent undesirable developments and exceeding of limits, can be considered outright as a yardstick for a high-ranking safety culture. Safety Culture as a whole, however, needs more than more measuring techniques. It requires its own and adequate Measurement Culture, presupposing also motivation and determination to measure. Therefore, education, training, knowledge and consciousness of safety of the people who are responsible for measurements are decisive for successful radiation protection. (orig.) [de

  13. Monitoring and crisis system of radiation safety

    International Nuclear Information System (INIS)

    Bartok, J.; Borovansky, P.; Macica, J.; Petrovicova, M.

    2005-01-01

    In this paper we have briefly described our practical experiences with the most complex Radiation Monitoring System we have designed. This system consists of number of stations; those data are collected in the main crisis center of the whole system. The main center integrates RMS Central Database, the IMS Model Suite workstation and the Graphics workstation. The radiations probes of the RP series are the base for stationary , portable sets and for sets measuring underwater radiation. The radiation and meteorological data, which are necessary for reasonable interpretation of radiation data, are archived in RMS Central database. The Lagrangian trajectory model from the IMS Model Suite serves for radiation dispersion modeling. (authors)

  14. Radiation protection education and training infrastructure. Open and distance learning tools for training in radiation protection

    Energy Technology Data Exchange (ETDEWEB)

    Marco, M.; Rodriguez, M.; Gonzalez Giralda, C.G.; Bailador Ferreras, A.B. [CIEMAT, Madrid (Spain); Coeck, M.C. [Studiecentrum voor Kernenergie - Centre d' Etude de l' Energie Nucleaire, Mol (Belgium); Etard, C.E. [CEA Saclay, 91 - Gif sur Yvette (France). INSTN, Institut National des Sciences et Techniques Nucleaires; Moebius, S.M. [FZK -FTU, Munich (Germany); Schmitt-Hanning, A.S. [BfS, Karlsruhe (Germany); Luciani, A.I. [ENEA, Bologna (Italy); Van Der Steen, J.V. [NRG, Petten (Netherlands)

    2006-07-01

    Full text: A sustainable Education and Training (E.T.) infrastructure for Radiation Protection is an essential component to combat the decline in expertise and to ensure the continuation of the high level of radiation protection knowledge in the future. Such infrastructure has to be built in such a way that both the initial training (Education) and the unceasing maintenance of the level of competencies (referred to as 'Training') are available. The E.N.E.T.R.A.P. project intends to develop the E.T. infrastructure mentioned. To achieve the aims of the different tasks and activities, the work programme for the E.N.E.T.R.A.P. Network is divided in eight work packages developed by 11 partners: Each partner will assume responsibility for the W.P.s. C.I.E.M.A.T. is involved in the W.P.-5 'New concepts and new tools for an E.R.P.C.'. The tasks of the W.P.-5 are focussed in the investigation of the electronic tools used in R.P. training and education. This paper presents the first results of this working group. The first task is an approach to the development and usage of learning resources. A review on the e-learning methodologies, the present state of art and its evolution, are being carried out. Results will be used to select the best way to host learning activities in the framework of the E.N.E.T.R.A.P. project. Another important task is to identify, analyse and evaluate the Open and Distance learning tools and material existing for train ing in Radiation Protection. A review on the evolutions, approaches and methodologies aiming to provide education and training in radiation protection, will be carried out. The results of this task will be a summary of links referred to the most interesting R.P. e-learning. Finally, taking in account the previous results a pilot R.P. module of E.R.P.C. should be prepared. (authors)

  15. Radiation protection education and training infrastructure. Open and distance learning tools for training in radiation protection

    International Nuclear Information System (INIS)

    Marco, M.; Rodriguez, M.; Gonzalez Giralda, C.G.; Bailador Ferreras, A.B.; Coeck, M.C.; Etard, C.E.; Schmitt-Hanning, A.S.; Luciani, A.I.; Van Der Steen, J.V.

    2006-01-01

    Full text: A sustainable Education and Training (E.T.) infrastructure for Radiation Protection is an essential component to combat the decline in expertise and to ensure the continuation of the high level of radiation protection knowledge in the future. Such infrastructure has to be built in such a way that both the initial training (Education) and the unceasing maintenance of the level of competencies (referred to as 'Training') are available. The E.N.E.T.R.A.P. project intends to develop the E.T. infrastructure mentioned. To achieve the aims of the different tasks and activities, the work programme for the E.N.E.T.R.A.P. Network is divided in eight work packages developed by 11 partners: Each partner will assume responsibility for the W.P.s. C.I.E.M.A.T. is involved in the W.P.-5 'New concepts and new tools for an E.R.P.C.'. The tasks of the W.P.-5 are focussed in the investigation of the electronic tools used in R.P. training and education. This paper presents the first results of this working group. The first task is an approach to the development and usage of learning resources. A review on the e-learning methodologies, the present state of art and its evolution, are being carried out. Results will be used to select the best way to host learning activities in the framework of the E.N.E.T.R.A.P. project. Another important task is to identify, analyse and evaluate the Open and Distance learning tools and material existing for train ing in Radiation Protection. A review on the evolutions, approaches and methodologies aiming to provide education and training in radiation protection, will be carried out. The results of this task will be a summary of links referred to the most interesting R.P. e-learning. Finally, taking in account the previous results a pilot R.P. module of E.R.P.C. should be prepared. (authors)

  16. Radiation safety aspects pertaining to female patients and staff

    International Nuclear Information System (INIS)

    Patni, Nidhi

    2017-01-01

    Many organizations in the world are committed to gender parity. Increasing number of women is working in the fields of radiation medicine and in industries dealing with radiation. Women patients may be exposed to radiation in radiology, radiation oncology, nuclear medicine, interventional cardiology, dentistry etc. Radiation safety of women staff and women patients is different from their male counterparts because of conception and pregnancy. So, fetal health is a matter of concern in the above. Also, the excess relative risk of radiation induced cancers in females relates to higher risk of thyroid cancer and high radiosensitivity as compared to males

  17. Pulsed power safety and technical training at Sandia National Laboratories

    International Nuclear Information System (INIS)

    Goldstein, S.A.; Zawadzkas, G.A.; Donovan, G.L.; Mikkelson, K.A.; Sharpe, A.W.; Johnston, R.R.

    1987-01-01

    The expansion of pulsed power applications research at Sandia National Labs requires increasing technician-level support from individuals trained in high voltage, short pulse technology. Large superpower generators need a broad-based training curriculum in all aspects of accelerator operation to satisfy recent Department of Energy (DOE) desires for formal certification of accelerator operators. This paper discusses the status of Sandia's safety and technical training program in pulsed power technology directed mainly towards high school graduate and technical school level students. Present safety training methodology requires that hazards for experimental facilities are identified first, a specific curriculum is then tailored to individuals' background experiences and hazards involved with their current assignments. In the technical training program, certification requirements are being established and a coursework program has been initiated in which subjects are organized into two sections. The first covers electrical principles and physical properties of pulsed power components. The second presents various support-type subsystems for accelerators

  18. INSAG's ongoing work on nuclear, radiation and waste safety

    International Nuclear Information System (INIS)

    Baer, A.J.

    1999-01-01

    The International Nuclear Safety Advisory Group (INSAG) is an advisory group to the Director General of the IAEA. It identifies current nuclear safety issues, draws conclusions from its analyses and gives advice on those issues. INSAG is currently working on four documents: a complete revision of INSAG-3, the classical paper on safety principles for nuclear plants, published in 1988; 'Safety Management', the effective system for the management of operational strategy; 'Safe Management of the Life Cycle of Nuclear Power Plants'; and the fourth document in preparation entitled 'The Safe Management of Sources of Radiation: Principles and Strategies'. The fourth document is aimed primarily at political decision makers who have no knowledge of radiation safety or of nuclear matters generally but are called upon to make important decisions in this field. INSAG has attempted to present them with a 'unified doctrine' of the management of all radiation sources, even though, for historical reasons radiation protection and nuclear safety have evolved largely independently of each other. The major conclusion to be drawn from the paper is that a systematic application of protection and safety principles, and of appropriate strategies, goes a long way towards ensuring the safe management of technologies involving radiation. Furthermore, the management of sources of radiation could benefit from the experience accumulated in other industries facing comparable challenges

  19. An investigation into the actual condition of radiation safety control

    International Nuclear Information System (INIS)

    Katsurayama, Kosuke

    1976-01-01

    The result of investigation on the real condition of radiation safety control is reported with some considerations. The investigation was made in April, 1975, by means of questionnaires to 418 companies, and the responses were obtained from 126 companies, i.e. 11 research laboratories, 98 manufacturing factories, and 17 inspection facilities. The average integrated dose in the inspection facilities was 0.91 rem/year, the most among three. The exposure dose in most of the research laboratories and manufacturing factories investigated was within the limit of 0.5 rem/year, and that in the inspection facilities was distributed over from the background level to 5 rem/year. The ratios of the workers engaged in radiation operation and the workers possessing the licences related to non-destructive examination to all employees were investigated, but they were not at satisfactory level. Regarding the abandonment of radioactive isotopes, 63.5% of the companies answered deliver the radioactive isotopes to be abandoned to Japan Isotope Association, and 25.7% let equipment makers to take them back. As for the education and training of operators for the safe treatment of radioactive substances and the prevention of accidents, most of the companies answered gave the education once or twice a year, and to those who just entered the companies, but more substantial education in desirable. (Nishino, S.)

  20. Radiation safety program in a high dose rate brachytherapy facility

    International Nuclear Information System (INIS)

    Rodriguez, L.V.; Hermoso, T.M.; Solis, R.C.

    2001-01-01

    The use of remote afterloading equipment has been developed to improve radiation safety in the delivery of treatment in brachytherapy. Several accidents, however, have been reported involving high dose-rate brachytherapy system. These events, together with the desire to address the concerns of radiation workers, and the anticipated adoption of the International Basic Safety Standards for Protection Against Ionizing Radiation (IAEA, 1996), led to the development of the radiation safety program at the Department of Radiotherapy, Jose R. Reyes Memorial Medical Center and at the Division of Radiation Oncology, St. Luke's Medical Center. The radiation safety program covers five major aspects: quality control/quality assurance, radiation monitoring, preventive maintenance, administrative measures and quality audit. Measures for evaluation of effectiveness of the program include decreased unnecessary exposures of patients and staff, improved accuracy in treatment delivery and increased department efficiency due to the development of staff vigilance and decreased anxiety. The success in the implementation required the participation and cooperation of all the personnel involved in the procedures and strong management support. This paper will discuss the radiation safety program for a high dose rate brachytherapy facility developed at these two institutes which may serve as a guideline for other hospitals intending to install a similar facility. (author)

  1. [Does simulator-based team training improve patient safety?].

    Science.gov (United States)

    Trentzsch, H; Urban, B; Sandmeyer, B; Hammer, T; Strohm, P C; Lazarovici, M

    2013-10-01

    Patient safety became paramount in medicine as well as in emergency medicine after it was recognized that preventable, adverse events significantly contributed to morbidity and mortality during hospital stay. The underlying errors cannot usually be explained by medical technical inadequacies only but are more due to difficulties in the transition of theoretical knowledge into tasks under the conditions of clinical reality. Crew Resource Management and Human Factors which determine safety and efficiency of humans in complex situations are suitable to control such sources of error. Simulation significantly improved safety in high reliability organizations, such as the aerospace industry.Thus, simulator-based team training has also been proposed for medical areas. As such training is consuming in cost, time and human resources, the question of the cost-benefit ratio obviously arises. This review outlines the effects of simulator-based team training on patient safety. Such course formats are not only capable of creating awareness and improvements in safety culture but also improve technical team performance and emphasize team performance as a clinical competence. A few studies even indicated improvement of patient-centered outcome, such as a reduced rate of adverse events but further studies are required in this respect. In summary, simulator-based team training should be accepted as a suitable strategy to improve patient safety.

  2. Experience with performance based training of nuclear criticality safety engineers

    International Nuclear Information System (INIS)

    Taylor, R.G.

    1993-01-01

    Historically, new entrants to the practice of nuclear criticality safety have learned their job primarily by on-the-job training (OJT) often by association with an experienced nuclear criticality safety engineer who probably also learned their job by OJT. Typically, the new entrant learned what he/she needed to know to solve a particular problem and accumulated experience as more problems were solved. It is likely that more formalism will be required in the future. Current US Department of Energy requirements for those positions which have to demonstrate qualification indicate that it should be achieved by using a systematic approach such as performance based training (PBT). Assuming that PBT would be an acceptable mechanism for nuclear criticality safety engineer training in a more formal environment, a site-specific analysis of the nuclear criticality safety engineer job was performed. Based on this analysis, classes are being developed and delivered to a target audience of newer nuclear criticality safety engineers. Because current interest is in developing training for selected aspects of the nuclear criticality safety engineer job, the analysis i's incompletely developed in some areas. Details of this analysis are provided in this report

  3. An evaluation of the uranium mine radiation safety course

    International Nuclear Information System (INIS)

    1984-07-01

    The report evaluates the Uranium Mine Radiation Safety Course focussing on the following areas: effectivenss of the course; course content; instructional quality; course administration. It notes strengths and weaknesses in these areas and offers preliminary recommendations for future action

  4. Basic elements of a regulatory programme for radiation safety

    International Nuclear Information System (INIS)

    Bilbao, A.A.

    2000-01-01

    In this lecture the objectives of IAEA TECDOC 1067: Organization and implementation of a national regulatory infrastructure governing protection against ionizing radiation and the safety of sources (1999) is presented

  5. Radiation safety status at a bio medical research centre

    International Nuclear Information System (INIS)

    Mishra, S.K.

    1998-01-01

    Radioisotopes are being used for biomedical research purpose at School of Life Science, Jawaharlal Nehru University for the last twenty five years. Present paper analyses the overall status of radiation safety at this Centre

  6. Requirements of radiation protection and safety for nuclear medicine services

    International Nuclear Information System (INIS)

    1989-01-01

    The requirements of radiation protection and safety for nuclear medicine services are established. The norms is applied to activities related to the radiopharmaceuticals for therapeutics and 'in vivo' diagnostics purposes. (M.C.K.) [pt

  7. Radiation safety in nuclear industry in retrospect and perspective

    International Nuclear Information System (INIS)

    Pan Ziqiang

    1993-01-01

    More than 30 years have passed since the starting up of nuclear industry in China from the early 1950's. Over the past 30-odd years, nuclear industry has always kept a good record in China thanks to the policy of 'quality first, safety first' clearly put forward for nuclear industry from the outset and a lot of suitable effective measures taken over that period. Internationally, there is rapid progress in radiation protection and nuclear safety (hereafter refereed to as radiation safety) and a number of new concepts in the field of radiation protection have been advanced. Nuclear industry is developing based on the international standardization. To ensure the further development of nuclear utility, radiation safety needs to be further strengthened

  8. Technical qualification requirements and training programs for radiation protection personnel at Oak Ridge National Laboratory

    International Nuclear Information System (INIS)

    Copenhaver, E.D.; Houser, B.S.; Butler, H.M. Jr.; Bogard, J.S.; Fair, M.F.; Haynes, C.E.; Parzyck, D.C.

    1986-04-01

    This document deals with the policies and practices of the Environmental and Occupational Safety Division (EOSD) at the Oak Ridge National Laboratory (ORNL) in regard to the selection, training, qualification, and requalification of radiation protection staff assigned to reactor and nonreactor nuclear facilities. Included are personnel at facilities that: (1) operate reactors or particle accelerators; (2) produce, process, or store radioactive liquid or solid waste; (3) conduct separations operations; (4) engage in research with radioactive materials and radiation sources; and (5) conduct irradiated materials inspection, fuel fabrication, deconamination, or recovery operations. The EOSD personnel also have environmental surveillance and operational and industrial safety responsibilities related to the total Laboratory

  9. The safety of radiation sources and radioactive materials in China

    International Nuclear Information System (INIS)

    Liu, H.

    2001-01-01

    The report describes the present infrastructure for the safety of radiation sources in China, where applications of radiation sources have become more and more widespread in the past years. In particular, it refers to the main functions of the National Nuclear Safety Administration of the State Environmental Protection Administration (SEPA), which is acting as the regulatory body for nuclear and radiation safety at nuclear installations, the Ministry of Public Health which issues licences for the use of radiation sources, and the Ministry of Public Security, which deals with the security of radiation sources. The report also refers to the main requirements of the existing regulatory system for radiation safety, i.e. the basic dose limits for radiation workers and the public, the licensing system for nuclear installations and for radioisotope-based and other irradiation devices, and the environmental impact assessment system. Information on the nationwide survey of radiation sources carried out by SEPA in 1991 is provided, and on some accidents that occurred in China due to loss of control of radiation sources and errors in the operation of irradiation facilities. (author)

  10. The effect of training and job interruptions on logging crews' safety in ...

    African Journals Online (AJOL)

    The effect of training and job interruptions on logging crews' safety in ... method, experienced and inexperienced crews were studied before training, after ... that provision of appropriate safety gears as well as delivery of on job training are ...

  11. Handbook on radiation safety. Spravochnik po radiatsionnoj bezopasnosti

    Energy Technology Data Exchange (ETDEWEB)

    Kozlov, V R

    1977-01-01

    The handbook reflects changes, in quotas, providing radiation safety in the Soviet Union, and in state standards. It includes the data, published in the soviet and foreign press up to 1975 on problems of ionizing radiation interaction with a substance, on terminology and units for measuring ionizing radiations and radioactivity, doses of background and admissible personnel irradiation in space, resulting from natural and artificial sources,from medical procedures. Given are the norms and sanitary rules of radiation protection when operating ionizing radiations sources at nuclear power plants, nuclear reactors, critical assemblies, placing and operating charged particle accelerators. Included is ample information on dosimetry of X-ray, gamma-, and neutron radiation, on dosimetry of charged particles, aerosols and gases, on radiometry and spectrometry of internal irradiation and radiation sources. Devices for ionizina radiation registration, model radiation sources, radionuclide solutions and their calibration are described.

  12. Training of human resources on radiation protection and safe use of radiation sources. Argentine experience

    International Nuclear Information System (INIS)

    Biaggio, Alfredo L.; Nasazzi, Nora B.; Arias, Cesar

    2004-01-01

    Argentina has a long experience in Radiation Protection training since 25 years ago. In the present work we analyse those variable and non variable training aspects according to scientific development, increasing radiation source diversity (including new concepts like orphan sources and security), mayor concern about patient in Radiation Protection, previous exposures, etc. We comment what we consider the main steps in the training of Radiation Protection specialists, like university degree, post graduate education distinguishing between formative and informative contents and on the job training. Moreover, we point out the trainees aptitudes and attitudes to be developed in order to work properly in this interdisciplinary field. (author)

  13. Radiation Safety of Accelerator Facility with Regard to Regulation

    International Nuclear Information System (INIS)

    Dedi Sunaryadi; Gloria Doloresa

    2003-01-01

    The radiation safety of accelerator facility and the status of the facilities according to licensee in Indonesia as well as lesson learned from the accidents are described. The atomic energy Act No. 10 of 1997 enacted by the Government of Indonesia which is implemented in Radiation Safety Government Regulation No. 63 and 64 as well as practice-specific model regulation for licensing request are discussed. (author)

  14. A proposal for an international convention on radiation safety

    International Nuclear Information System (INIS)

    Ahmed, J.U.

    1998-01-01

    One century has passed since harmful effects of radiation on living tissues were recognized. Organized efforts to reduce radiation hazards began in early 1920s. Major efforts by the ICRP since 1928, aided by ICRU, greatly helped in formulating principles, policies and guidance for radiation protection. The WHO formally recognized ICRP in 1956 and began implementing ICRP recommendations and guidance throughout the world. The IAEA, after it took office in 1957, began to establish or adopt standards of safety based on ICRP recommendations and provide for application of these standards in the field of atomic energy. Later on, other pertinent international organizations joined IAEA in establishing the Basic Safety Standards on radiation safety. The IAEA has issued, until now, nearly couple of hundred safety related documents on radiation safety and waste management. However, in spite of all such international efforts for three quarter of a century, there has been no effective universal control in radiation safety. Problems exist at the user, national, international and manufacturers and suppliers levels. Other problems are management of spent sources and smuggling of sources across international borders. Although, radiation and radionuclides are used by all countries of the world, regulatory and technical control measures in many countries are either lacking or inadequate. The recommendations and technical guidance provided by the international organizations are only advisory and carry no mandatory force to oblige countries to apply them. Member States approve IAEA safety standards and guides at the technical meetings and General Conference, but many of them do not apply these. An International Convention is, therefore, essential to establish international instrument to ensure universal application of radiation safety. (author)

  15. Proceedings of the 4th annual meeting of Japanese Society of Radiation Safety Management 2005 Kyoto

    International Nuclear Information System (INIS)

    2005-01-01

    This is the program and the proceedings of the 4th annual meeting of Japanese Society of Radiation Safety Management held from November 23rd through the 25th of 2005. The sessions held were: (1) Medical Exposure, (2) Environmental Measurement and Radiation Source Handling, (3) Radiation Measurement and Influence of Electromagnetic Waves, (4) Utilization of Irradiation, (5) Countermeasures against Contamination and Inspection of Contamination, (6) Imaging Plate, (7) Controlled Measurement and Dose Evaluation, (8) Working Environment Measurement 1, (9) Working Environment Measurement 2, (10) Establishment of Software and System, (11) Radiation Education 1, (12) Radiation Education 2, and (13) Exposure Reduction and Safety Control. The poster sessions held were: (1) Exposure Reduction and Radiation Evaluation, (2) Radiation Measurement and Influence of Electromagnetic Waves, (3) Education Training, (4) Safety Control, (5) Software, Data Handling, and Shielding Calculation, and (6) Environmental Radioactivity. The keynote lectures held were: (1) 'Situation of Medical Exposure' and (2) 'Cosmic Radiation While Boarding on Airplanes'. The symposia held were: (1) 'Food Irradiation' and (2) 'Life Science'. (S.K.)

  16. The international standard for protection from ionizing radiation and safety of radiation sources

    Energy Technology Data Exchange (ETDEWEB)

    Schlesinger, T [Israel Atomic Energy Commission, Yavne (Israel). Soreq Nuclear Research Center

    1995-06-01

    This document is a review in hebrew of the new 1994 international standard of the IAEA. The new standard title is `Basic safety standards for radiation protection and for the safety of radiation sources`, which were published in the ICRP Pub. 9.

  17. Improving radiation worker safety at the Chernobyl Shelter

    International Nuclear Information System (INIS)

    Vargo, G.J.; Korneev, A.A.

    2000-01-01

    The Shelter (i.e. 'sarcophagus') enclosing the remains of the Chernobyl Nuclear Power Plant Unit 4 that was destroyed in the April 1986 accident presents a unique radiological and nuclear safety challenge. The Chomobyl Shelter holds over 190 tons of irradiated nuclear fuel in the form of lava fuel containing masses and dust. Hazards include very high radiation, surface contamination and transient airborne radioactivity concentrations. A state-of-the-art radiation protection program is needed to support international efforts stabilize the Chornobyl Shelter, reduce the potential for major structural failure, minimize the consequences of a such an event, and develop a long-term strategy and study for its conversion into an environmentally safe site. This project consists of the first phase of efforts to transfer health physics technology necessary to support stabilization of the Chornobyl Shelter. Technical specifications for each major system and component were jointly developed by staff from the U.S. Department of Energy's Pacific Northwest National Laboratory and the Chornobyl Shelter. Major elements of this technology transfer include equipment for external dose control (electronic dosimeters, thermoluminescent dosimeter (TLD) system, portable radiation survey instruments, and area radiation monitors), internal dose control (whole body counter, bioassay system design and technical support), health physics training, and other radiological technical support. A work planning system that includes the capability to collect data such as radiological surveys, photographs, video clips, and other data, was developed from a system demonstrated at the U.S. Department of Energy's Hanford Site. An access control system similar to one used at several commercial nuclear facilities in the U.S. was converted for bilingual support (Russian and English). Technology for improving contamination control includes HEPA-ventilation and vacuum cleaner systems, semi-permanent and portable

  18. Nuclear criticality safety specialist training and qualification programs

    International Nuclear Information System (INIS)

    Hopper, C.M.

    1993-01-01

    Since the beginning of the Nuclear Criticality Safety Division of the American Nuclear Society (ANS) in 1967, the nuclear criticality safety (NCS) community has sought to provide an exchange of information at a national level to facilitate the education and development of NCS specialists. In addition, individual criticality safety organizations within government contractor and licensed commercial nonreactor facilities have developed training and qualification programs for their NCS specialists. However, there has been substantial variability in the content and quality of these program requirements and personnel qualifications, at least as measured within the government contractor community. The purpose of this paper is to provide a brief, general history of staff training and to describe the current direction and focus of US DOE guidance for the content of training and qualification programs designed to develop NCS specialists

  19. Radiation safety and workers safety: partners instead of rivals

    International Nuclear Information System (INIS)

    Lambotte, S.; Severitt, S.; Sobetzko, T.; Voelker, T.

    2008-01-01

    It is shown how important and paying it is to look upon working systems as a whole with regard to danger and load at the working place, and to use existing synergies. At many places, a change of approach in this direction is still necessary, in order to recognize the connection between the various fields of operational safety as well as the potential that is hidden behind an effective utilization of the instruments for workers safety. (orig.)

  20. Safety operation of training reactor VR-1

    International Nuclear Information System (INIS)

    Matejka, K.

    2001-01-01

    There are three nuclear research reactors in the Czech Republic in operation now: light water reactor LVR-15, maximum reactor power 10 MW t , owner and operator Nuclear Research Institute Rez; light water zero power reactor LR-0, maximum reactor power 5 kW t , owner and operator Nuclear Research Institute Rez and training reactor VR-1 Sparrow, maximum reactor power 5 kW t , owner and operate Faculty of Nuclear Sciences and Physical Engineering, CTU in Prague. The training reactor VR-1 Vrabec 'Sparrow', operated at the Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, was started up on December 3, 1990. Particularly it is designed for training the students of Czech universities, preparing the experts for the Czech nuclear programme, as well as for certain research work, and for information programmes in the nuclear programme, as well as for certain research work, and for information programmes in sphere of using the nuclear energy (public relations). (author)

  1. Using computer-based training to facilitate radiation protection review

    International Nuclear Information System (INIS)

    Abercrombie, J.S.; Copenhaver, E.D.

    1989-01-01

    In a national laboratory setting, it is necessary to provide radiation protection overview and training to diverse parts of the laboratory population. This includes employees at research reactors, accelerators, waste facilities, radiochemical isotope processing, and analytical laboratories, among others. In addition, our own radiation protection and monitoring staffs must be trained. To assist in the implementation of this full range of training, ORNL has purchased prepackaged computer-based training in health physics and technical mathematics with training modules that can be selected from many topics. By selection of specific modules, appropriate radiation protection review packages can be determined to meet many individual program needs. Because our radiation protection personnel must have some previous radiation protection experience or the equivalent of an associate's degree in radiation protection for entry level, the computer-based training will serve primarily as review of major principles. Others may need very specific prior training to make the computer-based training effective in their work situations. 4 refs

  2. Training and Action for Patient Safety: Embedding Interprofessional Education for Patient Safety within an Improvement Methodology

    Science.gov (United States)

    Slater, Beverley L.; Lawton, Rebecca; Armitage, Gerry; Bibby, John; Wright, John

    2012-01-01

    Introduction: Despite an explosion of interest in improving safety and reducing error in health care, one important aspect of patient safety that has received little attention is a systematic approach to education and training for the whole health care workforce. This article describes an evaluation of an innovative multiprofessional, team-based…

  3. New Radiation Safety Standards of the Russian Federation

    International Nuclear Information System (INIS)

    Kutkov, V.A.

    2001-01-01

    Full text: The new Radiation Safety Standards of the Russian Federation are a first step in an implementation of the 1990 Recommendations of the ICRP into the existing national system of providing a radiation safety of the public. In new System the radiation source is examined as a source of harm and danger for the public. So the System shall include not only the measures for limitation of actual exposures, but also an assessment of efficiency of radiation protection in the practical activity, based on the analysis of a distribution of doses received and on the assessment of actions initiated to restrict the probability of potential exposures. The occupational and public exposure doses are only the indices of the quality of management of the source. In this System a radiation monitoring is a feedback for assessing the stability of the source and how it is controllable. It is a tool for predicting the levels of potential exposure and the relevant danger associated with the source. It is important to underline that the System of Providing a Radiation Safety is an interrelated system. None of its parts may be individually used. In particular, the mere conformity with dose limits is not yet a sufficient evidence of the successful operation of the safety system, because the normal exposure doses reflect only a source-related harm. The problems of implementation of this System of radiation protection and safety into the contemporary practice in the Russia is discussed. (author)

  4. [Innovative training for enhancing patient safety. Safety culture and integrated concepts].

    Science.gov (United States)

    Rall, M; Schaedle, B; Zieger, J; Naef, W; Weinlich, M

    2002-11-01

    Patient safety is determined by the performance safety of the medical team. Errors in medicine are amongst the leading causes of death of hospitalized patients. These numbers call for action. Backgrounds, methods and new forms of training are introduced in this article. Concepts from safety research are transformed to the field of emergency medical treatment. Strategies from realistic patient simulator training sessions and innovative training concepts are discussed. The reasons for the high numbers of errors in medicine are not due to a lack of medical knowledge, but due to human factors and organisational circumstances. A first step towards an improved patient safety is to accept this. We always need to be prepared that errors will occur. A next step would be to separate "error" from guilt (culture of blame) allowing for a real analysis of accidents and establishment of meaningful incident reporting systems. Concepts with a good success record from aviation like "crew resource management" (CRM) training have been adapted my medicine and are ready to use. These concepts require theoretical education as well as practical training. Innovative team training sessions using realistic patient simulator systems with video taping (for self reflexion) and interactive debriefing following the sessions are very promising. As the need to reduce error rates in medicine is very high and the reasons, methods and training concepts are known, we are urged to implement these new training concepts widely and consequently. To err is human - not to counteract it is not.

  5. Effective Learning on the Web Using the Internet for Safety Training

    International Nuclear Information System (INIS)

    Bar-Noy, T.; Sugarman, H.

    2004-01-01

    A previous article, Nuclear Physics Education on the web, concentrated on identifying some of the many resources for information on nuclear physics education. This article will concentrate on utilizing these resources in order to create effective learning environments. As more and more learning and training moves from the traditional face to face classroom to the internet, it is becoming increasingly important to improve the quality of online courses. In the examples given here, we concentrate on the area of radiation safety. The reason for this is that government regulations mandate that every worker who comes in contact with radioactive (and other hazardous) materials must undergo safety training before he begins work and at regular intervals thereafter. Unfortunately this training often consists of boring lectures and reading materials, with no interactivity and little or no evaluation following the training. Because of the importance of safety training, it is imperative to improve the quality of this training by creating effective learning environments. One way to do this is to create online courses via the internet. Aside from the fact that use of the internet vastly expands the resources available to the student and instructor, giving a course via the web is much more efficient in terms of time and expense

  6. Critical safety parameters: The logical approach to refresher training

    International Nuclear Information System (INIS)

    Johnson, A.R.; Pilkington, W.; Turner, S.

    1991-01-01

    Nuclear power plant managers must ensure that control room staff are able to perform effectively. This is of particular importance through the longer term after initial authorization. Traditionally refresher training has been based on delivery of fragmented training packages typically derived from the initial authorization training programs. Various approaches have been taken to provide a more integrated refresher training program. However, methods such as job and task analysis and subject matter expert derived training have tended to develop without a focused clear overall training objective. The primary objective of all control room staff training is to ensure a proper and safe response to all plant transients. At the Point Lepreau Nuclear Plant, this has defined the Critical Safety Parameter based refresher training program. The overall objective of the Critical Safety Parameter training program is to ensure that control room staff can monitor and control a discrete set of plant parameters. Maintenance of the selected parameters within defined boundaries assures adequate cooling of the fuel and containment of radioactivity. Control room staff need to be able to reliably respond correctly to plant transients under potentially high stress conditions,. utilizing the essential knowledge and skills to deal with such transients. The inference is that the knowledge and skills must be limited to that which can be reliably recalled. This paper describes how the Point Lepreau Nuclear Plant has developed a refresher training program on the basis of a limited number of Critical Safety Parameters. Through this approach, it has been possible to define the essential set of knowledge and skills which ensures a correct response to plant transients

  7. Towards an international regime on radiation and nuclear safety

    International Nuclear Information System (INIS)

    Gonzalez, A.J.

    2000-01-01

    The 1990s have seen the de facto emergence of what might be called an 'international regime on nuclear and radiation safety'. It may be construed to encompass three key elements: legally binding international undertakings among States; globally agreed international safety standards; and provisions for facilitating the application of those standards. While nuclear and radiation safety are national responsibilities, governments have long been interested in formulating harmonised approaches to radiation and nuclear safety. A principal mechanism for achieving harmonisation has been the establishment of internationally agreed safety standards and the promotion of their global application. The development of nuclear and radiation safety standards is a statutory function of the IAEA, which is unique in the United Nations system. The IAEA Statute expressly authorises the Agency 'to establish standards of safety' and 'to provide for the application of these standards'. As the following articles and supplement in this edition of the IAEA Bulletin point out, facilitating international conventions; developing safety standards; and providing mechanisms for their application are high priorities for the IAEA. (author)

  8. Report on nuclear and radiation safety in Slovenia in 1999

    International Nuclear Information System (INIS)

    Lovincic, D.

    2000-09-01

    The Slovenian Nuclear Safety Administration (SNSA) has prepared Report on Nuclear and Radiation Safety in Slovenia in 1999. This is one of the regular forms of reporting on the work of the Administration to the Government and National Assembly of the Republic of Slovenia.

  9. Interactive Computerized Based Training, In Radiation Protection at NRC-Negev

    International Nuclear Information System (INIS)

    Sberlo, E.; Krumbein, H.; Ankri, D.; Ben-Shachar, B.; Laichter, Y.; Weizer, G.; Adorarn, D.

    1999-01-01

    According to the rules of safety at the working places in Israel, all radiation employees in Israel should receive once a year a refreshing course in several areas of safety. At the NRC-Negev there are two kinds of radiation employees: the ''hot area'' employees, who work in an environment of radioactive materials or radiation machines and the ''old area'' employees (all the other employees in the NRC-Negev). One of the main goals of the Department of Human Resources Development and Training at the NRC-Negev was to organize safety refresher courses. All ''hot area'' employees received a training program of two days in safety subjects, each year. The ''cold area'' employees received the same course, each second year. The former training program included several lectures in radiation protection, health physics, biological effects of ionizing radiation, etc., as well as same lectures in industrial safety, fast aid, fee fighting, emergency procedures, etc. The safety refresher courses were given by Rental lectures. There were a lot of disadvantages in these frontal lectures: The lecturers are employees of the NRCN who had to stop their routine work in order to lecture; the lecturers had to carry out identical training for each course for a large group of workers; there was a lack of testing methods or any other certification for the employees. Recently, seven safety courseware were developed by the NRC-Negev and the CET (Centre for Educational Technology), in order to perform these safety refresher courses. The courseware are based on an interactive computerized training including tutorials and quiz. The tutorial is an interactive course in each subject. The employee gets a simple and clear explanation (including pictures). After each Morial there is a quiz which includes 7 American style questions. The first two courseware are for all the employees, the next 4 courseware for the ''hot area'' employees, and the seventh for the ''cold area'' employees (the seventh is a

  10. HySTAR: the hydrogen safety training and risk workplace

    International Nuclear Information System (INIS)

    Hay, R.

    2006-01-01

    This paper shows the output of the software package HySTAR, the Hydrogen Safety, Training and Risk Workplace. This is the software output of the CTFA, Canadian Hydrogen Safety Program projects. It shows the Hydrogen Virtual Interactive Expert Workplace, a guide for permitting and code enforcement for officials and other parties involved in approving hydrogen energy facilities. It also shows the Hydrogen Codes and Standards Report (Site Level) as well as Hydrogen Distances and Clearances Report

  11. Growth of the Female Professional in the Radiation Safety Department

    International Nuclear Information System (INIS)

    Yoon, J.

    2015-01-01

    Currently in Korea’s Nuclear Power Plants (KHNP), the number of the female staffs has been increased as planned construction of new NPPs. However the role of the female staffs in NPPs is still limited as before. Because there is the prejudice which the operating and the maintenance work is unsuitable for female owing to the risk of the radiation exposure and the physical weakness. So female staffs mostly belong to the supporting departments. In particular, the proportion of the female staffs is significantly higher in the radiation safety department among those. The ratio is 15% and is twice higher, whereas the total percentage of the female workers in KHNP is 8%. In the past, the women staffs in the radiation safety department were usually charge of the non-technical duties like the radiation exposure dose management and the education for radiation workers. Although the ratio of the women about that is still higher, nowadays, the role of the female workers tends to diversify to technical supports like the radiation protection and the radioactive waste management while increased the proportion of female employees. This trend is expected to continue for many years to come. Thus, in Korea’s NPPs, it is expected that many women will demonstrate their professionalism especially in the radiation safety department than any other departments. This presentation contains the detailed duty and trend about female staffs in the radiation safety department in Korea’s NPPs. (author)

  12. Radiation and ecological safety of nuclear fuel cycle installations

    International Nuclear Information System (INIS)

    Barbasheva, S.V.

    1995-01-01

    Nuclear power plants (NPP) and radioactive waste facilities safety issues are discussed; Chernobyl NPP personnel radiation doses for 1986 are indicated; radiation contamination of environment by Am-241 is investigated; data on radioactive contamination in southern part of Kiev Poles'e are considered

  13. Investigation of radiation safety and safety culture of medical sanitation vocation in Suzhou

    International Nuclear Information System (INIS)

    Tang Bo; Tu Yu; Zhang Yin

    2009-01-01

    Objective: To investigate the construction of radiation safety and safety culture of medical sanitation vocation in Suzhou. Methods: All medical units registered in administration center of Suzhou were included. The above selected medical units were completely investigated, district and county under the same condition of quality control. Results: The radiation safety and safety culture are existing differences among different property and grade hospitals of medicai sanitation vocation in Suzhou. Conclusion: The construction of radiation safety and safety culture is generally occupying in good level in suhzou, but there are obvious differences among different property and grade hospitals. The main reason for the differences in the importance attached to by the hospital decision-making and department management officials as well as the staff personal. (authors)

  14. EXPERIENCE NETWORKING UNIVERSITY OF EDUCATION TRAINING MASTERS SAFETY OF LIFE

    OpenAIRE

    Elvira Mikhailovna Rebko

    2016-01-01

    The article discloses experience networking of universities (Herzen State Pedagogical University and Sakhalin State University) in the development and implementation of joint training programs for master’s education in the field of life safety «Social security in the urban environment». The novelty of the work is to create a schematic design of basic educational training program for master’s education in the mode of networking, and to identify effective instructional techniques and conditions...

  15. Ultraviolet radiation, measurements and safety evaluations for radiation protection purposes

    International Nuclear Information System (INIS)

    Witew, B.; Fischer, P.G.

    1983-01-01

    In order to evaluate the effects of ultraviolet radiation, one has to study that photobiologically effective radiation which induces a just measurable threshold reaction. For practical radiation protection, one has to determine the permissible duration of exposure at the end of which the threshold reaction is induced. This time limit is derived by means of spectral measurements and determination of radiation intensity. Detrimental photobiological effects can be avoided, and favourable effects optimized, by observing the time limit. Thus these measurements are used to determine the threshold at which the desired effects of ultraviolet radiation will be accompanied by unwanted effects or damage to persons, as for instance in the use of ultraviolet radiation for operating room sterilization, arc welding work, or cosmetic purposes. (orig.) [de

  16. Argentine Radiation Protection Society Experience in RP education and training

    International Nuclear Information System (INIS)

    Bomben, A. M.; Ciallella, N. R.; Thomasz, E.; Rudelli, M.; Gisone, P.; Ventura, M.; Gomez Parada, I.; Signoretta, C.

    2003-01-01

    Since its creation in 1967, the Argentine Radiation Protection Society (SAR) promotes all the radiation protection and nuclear safety aspects not only within the scientific, technical and academic areas, but also to general public. To fulfill this objective, SAR organised training and refresher courses, seminars and workshops on RP subjects. During 2002, SAR organised 7 basic and specialized courses regarding the uses of radioactive materials in industrial applications and the course on medical response in radiological accidents, that was attended by Argentine and other Latin American participants. The programmes of the courses are developed in compliance with the legal requirements and also considering specifics needs. In this paper, the characteristics of the courses are enunciated and basic statistics regarding courses and participants are presented. For the 2003 and 2004, SAR foresees the organisation of 18 courses per year and has the capacity to deliver other courses by request. all the courses are delivered in Spanish language. Based on this educational experience SAR consider a priority the inclusion, of a RP module in all the scientific graduate programmes to generate awareness on the importance of RP. Taking into account the migration of professionals to Europe and North America and the Globalization, SAR advocates the harmonization of RP syllabus to attain an international recognition. (Author)

  17. A virtual radiation therapy workflow training simulation

    International Nuclear Information System (INIS)

    Bridge, P.; Crowe, S.B.; Gibson, G.; Ellemor, N.J.; Hargrave, C.; Carmichael, M.

    2016-01-01

    Aim: Simulation forms an increasingly vital component of clinical skills development in a wide range of professional disciplines. Simulation of clinical techniques and equipment is designed to better prepare students for placement by providing an opportunity to learn technical skills in a “safe” academic environment. In radiotherapy training over the last decade or so this has predominantly comprised treatment planning software and small ancillary equipment such as mould room apparatus. Recent virtual reality developments have dramatically changed this approach. Innovative new simulation applications and file processing and interrogation software have helped to fill in the gaps to provide a streamlined virtual workflow solution. This paper outlines the innovations that have enabled this, along with an evaluation of the impact on students and educators. Method: Virtual reality software and workflow applications have been developed to enable the following steps of radiation therapy to be simulated in an academic environment: CT scanning using a 3D virtual CT scanner simulation; batch CT duplication; treatment planning; 3D plan evaluation using a virtual linear accelerator; quantitative plan assessment, patient setup with lasers; and image guided radiotherapy software. Results: Evaluation of the impact of the virtual reality workflow system highlighted substantial time saving for academic staff as well as positive feedback from students relating to preparation for clinical placements. Students valued practice in the “safe” environment and the opportunity to understand the clinical workflow ahead of clinical department experience. Conclusion: Simulation of most of the radiation therapy workflow and tasks is feasible using a raft of virtual reality simulation applications and supporting software. Benefits of this approach include time-saving, embedding of a case-study based approach, increased student confidence, and optimal use of the clinical environment

  18. [Evaluating training programs on occupational health and safety: questionnaire development].

    Science.gov (United States)

    Zhou, Xiao-Yan; Wang, Zhi-Ming; Wang, Mian-Zhen

    2006-03-01

    To develop a questionnaire to evaluate the quality of training programs on occupational health and safety. A questionnaire comprising five subscales and 21 items was developed. The reliability and validity of the questionnaire was tested. Final validation of the questionnaire was undertaken in 700 workers in an oil refining company. The Cronbach's alpha coefficients of the five subscales ranged from 0.6194 to 0.6611. The subscale-scale Pearson correlation coefficients ranged from 0.568 to 0.834 . The theta coefficients of the five subscales were greater than 0.7. The factor loadings of the five subscales in the principal component analysis ranged from 0.731 to 0.855. Use of the questionnaire in the 700 workers produced a good discriminability, with excellent, good, fair and poor comprising 22.2%, 31.2%, 32.4% and 14.1 respectively. Given the fact that 18.7% of workers had never been trained and 29.7% of workers got one-off training only, the training program scored an average of 57.2. The questionnaire is suitable to be used in evaluating the quality of training programs on occupational health and safety. The oil refining company needs to improve training for their workers on occupational health and safety.

  19. Safety net : train safely, profitably, and stay out of jail

    Energy Technology Data Exchange (ETDEWEB)

    Byfield, M.

    2005-08-01

    This article discussed the benefits of new Web-based training and development services provided by AMEC Training and Development Services. Various Alberta safety regulations were also reviewed, and it was noted that the upstream oil and gas sector have already begun building up strong safety programs. Companies are now increasingly using computer-based training for employees to improve workplace safety. Web-based courses ensure that the subject material is understood by students. In addition, Web-based materials can be economically delivered to field personnel. The learning process can be tracked and recorded in the event that misfortune should occur in the future. Various e-learning packages were evaluated, including Gemini's SWIFT e-learning package. However, the degree to which the Web can replace classroom instruction remains controversial. Typically, modules of a course focus initially on a foundation description of the plant or process, then progress to operating procedures and troubleshooting lessons. Moving diagrams can be programmed using Macro-media Flash, and can be used to portray moving mechanical parts and chemical changes that would normally not be visible to an operator even when standing beside the equipment. It was concluded that with hundreds of workers to train, often on a just-in-time basis, training services that include Web-based instruction are often the most cost-effective and efficient means of training staff. 5 figs.

  20. SAFETY CONSIDERATIONS WITH BLOOD FLOW RESTRICTED RESISTANCE TRAINING

    Directory of Open Access Journals (Sweden)

    Alan Kacin

    2015-11-01

    Full Text Available Blood flow restricted resistance (BFRR training with pneumatic tourniquet has been suggested as an alternative for conventional weight training due to the proven benefits for muscle strength and hypertrophy using relatively low resistance, hence reducing the mechanical stress across a joint. As such, it has become an important part of rehabilitation programs used in either injured or operated athletes. Despite a general consensus on effectiveness of BFRR training for muscle conditioning, there are several uncertainties regarding the interplay of various extrinsic and intrinsic factors on its safety and efficiency, which are being reviewed from a clinical perspective. Among extrinsic factors tourniquet cuff pressure, size and shape have been identified as key for safety and efficiency. Among intrinsic factors, limb anthropometrics, patient history and presence of cardiac, vascular, metabolic or peripheral neurologic conditions have been recognized as most important. Though there are a few potential safety concerns connected to BFRR training, the following have been identified as the most probable and health-hazardous: (a mechanical injury to the skin, muscle, and peripheral nerves, (b venous thrombosis due to vascular damage and disturbed hemodynamics and (c augmented arterial blood pressure responses due to combined high body exertion and increased peripheral vascular resistance. Based on reviewed literature and authors’ personal experience with the use of BFRR training in injured athletes, some guidelines for its safe application are outlined. Also, a comprehensive risk assessment tool for screening of subjects prior to their inclusion in a BFRR training program is being introduced.

  1. Training in radiation protection of workers at Electricite de France nuclear power plants

    International Nuclear Information System (INIS)

    Aye, Louis

    1980-01-01

    The safety of workers and the population is a major concern of the nuclear industry. In order to carry out its programme of PWR power plants, Electricite de France has largely developed the training in radiation protection of its personnel. Operation workers now represent some 5000 persons; they first receive a formation organized at the national level consisting in training courses, which are completed and continued on the spot. The training makes a wide use of audiovisuals; it is checked by tests and leads to better qualification. Close coordination is sought with outside competent organizations [fr

  2. Status of radiation education and training in the Philippines

    Energy Technology Data Exchange (ETDEWEB)

    Bernido, C.C. [Philippine Nuclear Research Institute, Commonwealth Avenue, Diliman, Quezon (Philippines)

    1999-09-01

    There are three major sources and levels of obtaining radiation or nuclear education and training in the Philippines: the secondary schools or high schools; colleges and universities; and training courses in nuclear science and radiation protection offered by government agencies such as the Philippine Nuclear Research Institute (PNRI) of the Department of Science and Technology and the Radiation Health Service (RHS) of the Department of Health. This paper summarizes the status, some of the activities and some of the problems of radiation education in the Philippines. (author)

  3. Status of radiation education and training in the Philippines

    International Nuclear Information System (INIS)

    Bernido, C.C.

    1999-01-01

    There are three major sources and levels of obtaining radiation or nuclear education and training in the Philippines: the secondary schools or high schools; colleges and universities; and training courses in nuclear science and radiation protection offered by government agencies such as the Philippine Nuclear Research Institute (PNRI) of the Department of Science and Technology and the Radiation Health Service (RHS) of the Department of Health. This paper summarizes the status, some of the activities and some of the problems of radiation education in the Philippines. (author)

  4. Nuclear power plant radiation: personnel safety aspects

    International Nuclear Information System (INIS)

    Roekmantara, Roestan

    1975-01-01

    Reactor using water as coolant, moderator, and heat transfer can produce a sufficiently great internal and external radiation caused by contamination. The process of contamination and actions that must be taken to avoid radiation workers from receiving more than the maximum permissible dose are presented. (author)

  5. Radiation protection training then and now

    International Nuclear Information System (INIS)

    Mulleavy, T.

    1988-01-01

    Prior to the accident at Three Mile Island, the radiological control training was provided by the health physics and the chemistry departments. The programs that required the input from the health physics department were the Operations Training and the General Employee Training Programs, which were formally organized and presented radiological controls practices as part of the course objectives. The operations training section periodically requested the health physics department management to provide a radiological portion to their operator qualification or operations requalification class. After the accident in 1979, the General Employee Training Program administration was taken over by the operation training department where it underwent changes with a dedicated effort. The Operations Training Program also underwent a change as well as the Radiological Control Technician Training Program. Each group now has a specialty program designed for their specific needs. These programs have been designed using the Institute of Nuclear Power Operations and regulator guidelines

  6. Ordinance on the Finnish Centre of Radiation and Nuclear Safety

    International Nuclear Information System (INIS)

    1990-01-01

    This Ordinance was adopted in implementation of the 1983 Act setting up the Finnish Centre for Radiation and Nuclear Safety and the 1987 Nuclear Energy Act and entered into force on 1 November 1990. The Ordinance specifies the tasks of the Centre, as provided under both Acts, and gives it several supplementary responsibilities. In addition to its overall competence in respect of radiation safety, the Centre will carry out research into and supervise the health effects of radiation and maintain a laboratory for national measurements in that field. The Ordinance also sets out the Centre's organisation chart and the staff duties [fr

  7. The Advanced Light Source (ALS) Radiation Safety System

    International Nuclear Information System (INIS)

    Ritchie, A.L.; Oldfather, D.E.; Lindner, A.F.

    1993-08-01

    The Advanced Light Source (ALS) at the Lawrence Berkeley Laboratory (LBL) is a 1.5 Gev synchrotron light source facility consisting of a 120 kev electron gun, 50 Mev linear accelerator, 1.5 Gev booster synchrotron, 200 meter circumference electron storage ring, and many photon beamline transport systems for research. Figure 1. ALS floor plan. Pairs of neutron and gamma radiation monitors are shown as dots numbered from 1 to 12. The Radiation Safety System for the ALS has been designed and built with a primary goal of providing protection against inadvertent personnel exposure to gamma and neutron radiation and, secondarily, to enhance the electrical safety of select magnet power supplies

  8. Construction of data base for radiation safety assessment of low dose ionizing radiation

    International Nuclear Information System (INIS)

    Saigusa, Shin

    2001-01-01

    Data base with an electronic text on the safety assessment of low dose ionizing radiation have been constructed. The contents and the data base system were designed to provide useful information to Japanese citizens, radiation specialists, and decision makers for a scientific and reasonable understanding of radiation health effects, radiation risk assessment, and radiation protection. The data base consists of the following four essential parts, namely, ORIGINAL DESCRIPTION, DETAILED INFORMATION, TOPIC INFORMATION, and RELATED INFORMATION. The first two parts of the data base are further classified into following subbranches: Radiobiological effects, radiation risk assessment, and radiation exposure and protection. (author)

  9. Data survey about radiation protection and safety of radiation sources in research laboratories

    International Nuclear Information System (INIS)

    Paura, Clayton L.; Dantas, Ana Leticia A.; Dantas, Bernardo M.

    2005-01-01

    In Brazil, different types of research using unsealed sources are developed with a variety of radioisotopes. In such activities, professionals and students involved are potentially exposed to internal contamination by 14 C, 45 Ca, 51 Cr, 3 H, 125 I, 32 P, 33 P, 35 S, 90 Sr and 99m Tc. The general objective of this work is to evaluate radiological risks associated to these practices in order to supply information for planning actions aimed to improve radiation protection conditions in research laboratories. The criteria for risk evaluation and the safety aspects adopted in this work were based on CNEN Regulation 6.02 and in IAEA and NRPB publications. The survey of data was carried out during visits to laboratories in public Universities located in the city of Rio de Janeiro where unsealed radioactive sources are used in biochemistry, biophysics and genetic studies. According to the criteria adopted in this work, some practices developed in the laboratories require evaluation of risk of internal contamination depending on the conditions of source manipulation. It was verified the need for training of users of radioactive materials in this type of laboratory. This can be facilitated by the use of basic guides for the classification of areas, radiation protection, safety and source security in research laboratories. It was also observed the need for optimization of such practices in order to minimize the contact with sources. It is recommended to implement more effective source and access controls as a way to reduce risks of individual radiation exposure and loss of radioactive materials (author)

  10. Instructional games and activities for criticality safety training

    International Nuclear Information System (INIS)

    Bullard, B.; McBride, J.

    1993-01-01

    During the past several years, the Training and Management Systems Division (TMSD) staff of Oak Ridge Institute for Science and Education (ORISE) has designed and developed nuclear criticality safety (NCS) training programs that focus on high trainee involvement through the use of instructional games and activities. This paper discusses the instructional game, initial considerations for developing games, advantages and limitations of games, and how games may be used in developing and implementing NCS training. It also provides examples of the various instructional games and activities used in separate courses designed for Martin Marietta Energy Systems (MMES's) supervisors and U.S. Nuclear Regulatory Commission (NRC) fuel facility inspectors

  11. Development of a radiation protection training system and professional skills model in a multinational oil and gas industry

    International Nuclear Information System (INIS)

    Molteni, A.; Cerri, P.; Fresca Fantoni, R.

    2010-01-01

    The oil and gas industry makes extensive use of radioactive sources potentially dangerous to human health and to the environment if not properly controlled, including: industrial radiography, radioactive gauges, well logging activities, use of radiotracers. In addition, the accumulation of natural radionuclides (T.E.N.O.R.M.) may occur in the Oil and Gas extraction and treatment plants. Eni S.p.A. operates in more than 70 countries, with a staff of 79000 employees, in all climates and environments, including the most arduous conditions, and is continuously challenged to achieve high efficiency of operation while maintaining a high standard of safety, including the radiation protection aspects. Thus, in order to maintain the control over occupational exposures to radiation, to protect the public and the environment, and in order to deal with local rules and authorities, it has been developed a Radiation Protection Professional Model including three different roles (Radiation Protection Management, Radiation Protection Coordination and Operational Radiation Protection) that could be associated with the corresponding functions: Radiation Protection Expert, Radiation Protection Advisor, Radiation Protection Specialist. The Professional Model is a global Eni tool devoted to the know-how and the development of the human resources, including health, safety and environmental aspects, through the identification of detailed skills and knowledge. In order to provide the required knowledge to Eni workers all over the world, it has been developed a programme for education and training in radiation safety in collaboration with Eni Corporate University, the Eni company that manages orientation, recruitment, selection, training and Knowledge Management. Different training courses are organized to provide the training both for the Radiation Protection Coordination role (Radiation Protection Advisor course) and for the Operational Radiation Protection role (Radiation Protection

  12. Development of a radiation protection training system and professional skills model in a multinational oil and gas industry

    Energy Technology Data Exchange (ETDEWEB)

    Molteni, A.; Cerri, P.; Fresca Fantoni, R. [ENI S.P.A. exploration and production division, Radiation Protection Department, Via Emilia 1, 20097 San Donato Milanese (Italy)

    2010-07-01

    The oil and gas industry makes extensive use of radioactive sources potentially dangerous to human health and to the environment if not properly controlled, including: industrial radiography, radioactive gauges, well logging activities, use of radiotracers. In addition, the accumulation of natural radionuclides (T.E.N.O.R.M.) may occur in the Oil and Gas extraction and treatment plants. Eni S.p.A. operates in more than 70 countries, with a staff of 79000 employees, in all climates and environments, including the most arduous conditions, and is continuously challenged to achieve high efficiency of operation while maintaining a high standard of safety, including the radiation protection aspects. Thus, in order to maintain the control over occupational exposures to radiation, to protect the public and the environment, and in order to deal with local rules and authorities, it has been developed a Radiation Protection Professional Model including three different roles (Radiation Protection Management, Radiation Protection Coordination and Operational Radiation Protection) that could be associated with the corresponding functions: Radiation Protection Expert, Radiation Protection Advisor, Radiation Protection Specialist. The Professional Model is a global Eni tool devoted to the know-how and the development of the human resources, including health, safety and environmental aspects, through the identification of detailed skills and knowledge. In order to provide the required knowledge to Eni workers all over the world, it has been developed a programme for education and training in radiation safety in collaboration with Eni Corporate University, the Eni company that manages orientation, recruitment, selection, training and Knowledge Management. Different training courses are organized to provide the training both for the Radiation Protection Coordination role (Radiation Protection Advisor course) and for the Operational Radiation Protection role (Radiation Protection

  13. Efficacy of a radiation safety education initiative in reducing radiation exposure in the pediatric IR suite

    International Nuclear Information System (INIS)

    Sheyn, David D.; Racadio, John M.; Patel, Manish N.; Racadio, Judy M.; Johnson, Neil D.; Ying, Jun

    2008-01-01

    The use of ionizing radiation is essential for diagnostic and therapeutic imaging in the interventional radiology (IR) suite. As the complexity of procedures increases, radiation exposure risk increases. We believed that reinforcing staff education and awareness would help optimize radiation safety. To evaluate the effect of a radiation safety education initiative on IR staff radiation safety practices and patient radiation exposure. After each fluoroscopic procedure performed in the IR suite during a 4-month period, dose-area product (DAP), fluoroscopy time, and use of shielding equipment (leaded eyeglasses and hanging lead shield) by IR physicians were recorded. A lecture and article were then given to IR physicians and technologists that reviewed ALARA principles for optimizing radiation dose. During the following 4 months, those same parameters were recorded after each procedure. Before education 432 procedures were performed and after education 616 procedures were performed. Physician use of leaded eyeglasses and hanging shield increased significantly after education. DAP and fluoroscopy time decreased significantly for uncomplicated peripherally inserted central catheters (PICC) procedures and non-PICC procedures after education, but did not change for complicated PICC procedures. Staff radiation safety education can improve IR radiation safety practices and thus decrease exposure to radiation of both staff and patients. (orig.)

  14. Investigation of status of safety management in radiation handle works

    International Nuclear Information System (INIS)

    Amauchi, Hiroshi; Nishimura, Kenji; Izumi, Kokichi

    2007-01-01

    This report describes the investigation in the title concerning the system for safety management and for accident prevention, which was done by a questionnaire in a period of 1.5 months in 2005. The questionnaire including 55 questions for safety management system, 33 for instruments and safety utilization of radiation and 57 for present status of safety management in high-risk radiation works, was performed in 780 hospitals, of which 313 answered. The first 55 questions concerned with the facility, patient identification, information exchange, management of private information, safety management activities, measures to prevent accident, manual preparation, personnel education and safety awareness; the second, with management of instruments, package insert, system for reporting the safety information, management of implants, re-imaging and radiation protection; and the third, with the systems for patients' emergency, in departments of CT/MR, of IVR, of nuclear diagnosis and of radiation therapy. Based on the results obtained, many problems, tasks and advices are presented to various items and further continuation of efforts to improve the present status is mentioned to be necessary. Details are given in the homepage of the Japanese Society of Radiological Technology. (T.I.)

  15. Radiation safety concerns during interventional radiology

    International Nuclear Information System (INIS)

    Victor Raj, D.; Livingstone, Roshan Samuel

    2001-01-01

    Interventional radiological procedures are on the increase by virtue of the fact that these procedures replace highly invasive surgical and other procedures. Radiation dose to patients and hospital workers are of significance since these procedures tend to impart large dose to them. Moreover, long term risk from radiation absorbed by patients is of concern since the life expectancy of major fraction of patients is long after undergoing the procedure. This study intends to measure radiation dose imparted to patients as well as personnel- radiologists, technologists, nurses, etc. and estimate the risk factor involved

  16. Measurement of natural background radiation intensity on a train

    International Nuclear Information System (INIS)

    Chen, Y. F.; Lin, J. W.; Sheu, R. J.; Lin, U. T.; Jiang, S. H.

    2011-01-01

    This work aims to measure different components of natural background radiation on a train. A radiation measurement system consisting of four types of radiation detectors, namely, a Berkeley Lab cosmic-ray detector, moderated 3He detector, high pressure ionisation chamber and NaI(Tl) spectrometer, associated with a global positioning system unit was established for this purpose. For the commissioning of the system, a test measurement on a train along the railway around the northern Taiwan coast from Hsinchu to Hualien with a distance of ∼275 km was carried out. No significant variation of the intensities of the different components of natural background radiation was observed, except when the train went underground or in the tunnels. The average external dose rate received by the crew of the train was estimated to be 62 nSv h -1 . (authors)

  17. SAFETY

    CERN Multimedia

    Niels Dupont

    2013-01-01

    CERN Safety rules and Radiation Protection at CMS The CERN Safety rules are defined by the Occupational Health & Safety and Environmental Protection Unit (HSE Unit), CERN’s institutional authority and central Safety organ attached to the Director General. In particular the Radiation Protection group (DGS-RP1) ensures that personnel on the CERN sites and the public are protected from potentially harmful effects of ionising radiation linked to CERN activities. The RP Group fulfils its mandate in collaboration with the CERN departments owning or operating sources of ionising radiation and having the responsibility for Radiation Safety of these sources. The specific responsibilities concerning "Radiation Safety" and "Radiation Protection" are delegated as follows: Radiation Safety is the responsibility of every CERN Department owning radiation sources or using radiation sources put at its disposition. These Departments are in charge of implementing the requi...

  18. Assessment and evaluation of nurses training programme on radiation

    International Nuclear Information System (INIS)

    Bessho, Y.; Kusama, T.

    1996-01-01

    Many nurses in hospitals and clinics are concerned about the care of patients diagnosed or treated with radiation. Knowledge about radiation effects and radiological protection was in limited supply among nurses. Some nurses are anxious about the effects of occupational radiation, and they have not appropriately coped with their patients' questions about radiation effects of medical exposure. We investigated the level of knowledge about radiation among nurses and required knowledge for nurses in hospitals and clinics. Based on the results of the investigation, we designed an education and training program of lectures and practice for nurses in hospitals. After the education and training by our program was done, we evaluated the effects of the education and training with an interview and a questionnaire for each nurse. (author)

  19. Criticality safety training at the Hot Fuel Examination Facility

    International Nuclear Information System (INIS)

    Garcia, A.S.; Courtney, J.C.; Thelen, V.N.

    1983-01-01

    HFEF comprises four hot cells and out-of-cell support facilities for the US breeder program. The HFEF criticality safety program includes training in the basic theory of criticality and in specific criticality hazard control rules that apply to HFEF. A professional staff-member oversees the implementation of the criticality prevention program

  20. Radiation safety infrastructure in developing countries: a proactive approach for integrated and continuous improvement

    International Nuclear Information System (INIS)

    Mrabit, Khammar

    2008-01-01

    medical exposures; radiation protection of the public; emergency preparedness and response; and education and training. Each of the participating countries had its specific Radiation and Waste Safety Infrastructure Profile (RaWaSIP) describing the status of its safety infrastructure measured against key requirements of the international standards; and detailed Action Plans to rectify identified safety gaps and to monitor progress achieved. In addition, a methodology to assess the effectiveness of the radiation safety infrastructure (Radiation Safety and Security Infrastructure Appraisal service, RaSSIA) was established and used. The paper describes the vision and strategy of the Model Project and its follow up projects, and the impressive results and outcomes so far achieved. The results show that there was more progress achieved, in establishing sustainable national radiation safety infrastructures, during the 12-14 years of the implementation of the Model Project and its follow up projects than in the previous nearly 40 years of assistance provided by the Agency. (author)