WorldWideScience

Sample records for radiation hodoscope developments

  1. Current developments in TREAT hodoscope technology

    International Nuclear Information System (INIS)

    De Volpi, A.

    1975-01-01

    The development of fuel motion monitoring is traced from its inception through present operation and into future programs. After noting the role of fuel motion studies in terms of safety assurance for the LMFBR, the history of in-pile fuel monitoring is reviewed. The operational record of the present TREAT fast neutron hodoscope is summarized with attention to various performance features. Development plans for the TREAT hodoscope are described in some detail. Application of the hodoscope has been considered for eight safety facilities other than TREAT. In addition, there is a possible role for fuel monitoring techniques to be extended to real-time ex-vessel core surveillance in operating reactors. Certain intrinsic strengths of the hodoscope technique for material monitoring are identified. The pattern of development may be characterized as an adaptation of several technologies to fit available requirements and resources

  2. Spectrometer of Cherenkov radiation rings with hodoscopic photomultipliers

    International Nuclear Information System (INIS)

    Abramov, V.V.; Alekseev, A.V.; Baldin, B.Yu.

    1983-01-01

    Characteristics of SKOCH Cherenkov radiation ring spectrometer intended for identification of π- and K-mesons and protons in a wide divergent beam in the pulse range of 5.5-30 GeV/s are investigated. The spectrometer detecting system is based on using the hodoscopic photoelectron multipliers (HPEM). The HPEM specific feature is that they have an extended cathode and permit to determine the coordinate of an incident photon by measuring the time of photoelectron drift to a dinode system. The spectrometer has been tested at the FODS facility in the secondary particle beam with angular divergence equal to 16x6 mrad and aperture of 400x200 mm in the pulse range of 6-20 GeV/s. The range of Cherenkov radiation angle detection is 40-100 mrad which corresponds to the particle velocity range of 0.996-1. The angular and radial aperture is 30 mrad, the diameter is 420 mm. The obtained velocity resolution is 6x10 -5

  3. Two-coordinate scintillation hodoscope based on hodoscopical photomultipliers

    International Nuclear Information System (INIS)

    Vishnevskij, N.K.; Ronzhin, A.I.; Semenov, V.K.; Khachaturov, B.A.

    1982-01-01

    The results of investigations of scintillation hodoscope on the basis of hodoscopic photomultipliers (HPM) for simultaneous measuring two coordinates (x and y) of a particle. The hodoscope consists of scintillation electrodes bent at the angle of 135 deg C and made an angle of 90 deg with each other. For measuring X-coordinate the half part of the photocathode is used, the second part is used for measuring Y-coordinate. HPM provides for simultaneous measuring two coordinates of a particle in the working region of 90 mm at using the photocathode with 180 mm long working region along the photocathode. The discrete separation of neighbouring positions in relation to the photocathode is possible at the minimum size of scintillation electrode being equil to >= 2 mm. For suppression of multiparticle background at the information output from the hodoscope as well as for simultaneous observation at the amplitude analyser of spectra of reference signals or X and Y profiles a fast processor cicuit has been developed. High detecting efficiency (about 90%) and low background level have been observed at the processor operation where the presence only of one signal in each of X- or Y projections is required. The two-coordinate hodoscope based on HPM due to its compactness and mobility may be used for expedient and precision beam guidance onto a target, its position control, shape and dimensions directly in the region of a polarized target location

  4. A helical scintillating fiber hodoscope

    CERN Document Server

    Altmeier, M; Bisplinghoff, J; Bissel, T; Bollmann, R; Busch, M; Büsser, K; Colberg, T; Demiroers, L; Diehl, O; Dohrmann, F; Engelhardt, H P; Eversheim, P D; Felden, O; Gebel, R; Glende, M; Greiff, J; Gross, A; Gross-Hardt, R; Hinterberger, F; Jahn, R; Jeske, M; Jonas, E; Krause, H; Lahr, U; Langkau, R; Lindemann, T; Lindlein, J; Maier, R; Maschuw, R; Mayer-Kuckuck, T; Meinerzhagen, A; Naehle, O; Pfuff, M; Prasuhn, D; Rohdjess, H; Rosendaal, D; Von Rossen, P; Sanz, B; Schirm, N; Schulz-Rojahn, M; Schwarz, V; Scobel, W; Thomas, S; Trelle, H J; Weise, E; Wellinghausen, A; Wiedmann, W; Woller, K; Ziegler, R

    1999-01-01

    A novel scintillating fiber hodoscope in helically cylindric geometry has been developed for detection of low multiplicity events of fast protons and other light charged particles in the internal target experiment EDDA at the Cooler Synchrotron COSY. The hodoscope consists of 640 scintillating fibers (2.5 mm diameter), arranged in four layers surrounding the COSY beam pipe. The fibers are helically wound in opposing directions and read out individually using 16-channel photomultipliers connected to a modified commercial encoding system. The detector covers an angular range of 9 deg. <= THETA<=72 deg. and 0 deg. <=phi (cursive,open) Greek<=360 deg. in the lab frame. The detector length is 590 mm, the inner diameter 161 mm. Geometry and granularity of the hodoscope afford a position resolution of about 1.3 mm. The detector design took into consideration a maximum of reliability and a minimum of maintenance. An LED array may be used for monitoring purposes. (author)

  5. Use of hodoscopes at ISABELLE

    International Nuclear Information System (INIS)

    Alspector, J.; Miller, R.J.

    1977-01-01

    A major problem for experimenters designing detectors for use at ISABELLE is the high interaction rate, one event every 25 nanoseconds at a luminosity of 10 33 cm -2 sec -1 . Typical multiplicities range from a few at large angles (> approximately 45 0 ) to approximately 10 nearer the forward direction. This implies average rates as high as a particle every few nanoseconds. For experiments which require high luminosities, detectors must be designed which have very short (approximately 1 nsec) response time and/or intercept a small solid angle per element. These requirements are met by fine-grained scintillation counter hodoscopes. However, it is, at present, impractical to maintain a 10,000 element hodoscope array because of the difficulty of light piping, the complexity and expense of maintaining that many phototubes, and the problems of packaging and readout. Several developments which promise to make such large arrays feasible are discussed

  6. Scintillation 1024-channel hodoscope

    International Nuclear Information System (INIS)

    Kotov, I.V.; Krasnokutskij, R.N.; Kurbakov, V.I.; Shchukin, A.V.

    1993-01-01

    Flow diagram of voltage divider for photomultiplier used in scintillation multichannel hodoscope is described. The suggested diagram of the divider allows to optimize potential distribution at the innput chamber (photocathode - modulator - first dynode) and in the tail segment of the divider (the nineth dynode-anode). Adjustment of high voltage is conducted using multirotational potentiometer switched in series with the divider. Amplifier-limiter with 80 mkA threshold set at voltage comparator is placed at divide plate. Threshold of its sensitivity constitutes 80 mkA. Hodoscope supply system consists of supply sources of comparators (+-6V) four sources of auxiliary supply sources of the last dynodes of photomultipliers and high-voltage source. Current consumption constitutes 25 A by - 6V, 23 A by + 6 V for the whole hodoscope and up to 200 mA from high-voltage source for one plane. Additional charging sources have constant consumption equal to ∼ 20 mA

  7. Development of a fast, fine-grained, scintillating fiber hodoscope for use in advanced detector systems for high-energy-physics research. Technical progress report, June 1, 1983-May 31, 1984

    International Nuclear Information System (INIS)

    Borenstein, S.R.

    1983-01-01

    This report will indicate the progress made since the last report in the following categories of activity: (1) procurement of a stock of acceptable plastic scintillator perform; (2) improvements in the technique and quality control of drawing and cladding scintillating fibers; (3) fabrication of the bilayer ribbon hodoscope; (4) operation of a prototype hodoscope at the AGS; (5) software development for data acquisition; (6) preparation of an efficient optical coupling between the scintillating fiber and the photo-detector; and (7) determination of the feasibility of the Avalanche Photodiode (APD) as a photo-detector

  8. Hodoscope performance and design

    International Nuclear Information System (INIS)

    Boyarski, A.; Ritson, D.

    1962-01-01

    The performance and circuitry of a hodoscoped array of 200 counters used on an experiment at Brookhaven is described. The circuitry, transistors, and phototubes all showed remarkable long-term stability. The lifetime of the transistors was 0.5 x 10 8 h, and only one out of the 200 phototubes deteriorated after six months use. A simple set of diagnostic routines checked performance of the apparatus in half an hour. The data was recorded on film, and the film was read with a ''programmed spot'' scanner into the M.I.T. TXO computer. One hour is required to read a 400-ft roll of film by this system. A simple modification has been made to the apparatus whereby the data is stored in parallel into a shift register and then read out serially onto magnetic tape. Such a system writes a 300-bit event on to tape in 1 ms and obviates the necessity for buffer storage. (author) [fr

  9. Trigger electronics for the forward and backward hodoscopes of ANKE

    International Nuclear Information System (INIS)

    Dymov, S.N.; Komarov, V.I.; Kulikov, A.V.; Merzlyakov, S.I.; Petrus, A.Yu.; Zhuravlev, N.I.; Mussgiller, A.

    2002-01-01

    Trigger electronics of the forward and backward scintillation hodoscopes of ANKE, the magnetic spectrometer placed at the internal beam line of the COSY-Juelich accelerator, is described. The two developed sets of trigger electronic modules are implemented in the whole ANKE trigger system and are used for the running experiments. For selection of double particle events in the hodoscope both the combinatory logic and the charge discrimination are used

  10. Scintillation hodoscope with working area of 50 x 50 cm based on hodoscopic photomultipliers

    International Nuclear Information System (INIS)

    Borog, V.V.; Vasil'chenko, V.G.; Demekhin, A.V.; Dronov, V.V.; Rykalin, V.I.

    1987-01-01

    The choice of optimum designs for the sensitive elements of large hodoscopes based on hodoscopic photomultipliers is examined. The results of numerical calculations are confirmed by measurement results. The measured space resolution of one of the scintillation-hodoscope designs (with two hodoscopic photomultipliers) with a sensitive volume of 50 x 50 x 2 mm is ≤ +3 mm

  11. Hodoscope module with miniature photomultipliers

    International Nuclear Information System (INIS)

    Bel'zer, L.I.; Gribushin, A.M.; Zhil'tsov, L.Ya.; Matveeva, E.N.; Philipenko, T.D.; Sinev, N.B.

    1987-01-01

    The experimental Scintillation Magnetic Spectrometer (SMS) installation, whose main element is an extended hodoscope system, is being built for the accelerator of the High Energy Laboratory of the Joint Institute for Nuclear Research. The authors describe the scintillation hodoscope of the SMS installation and present the applicable amplitude and time characteristics of several types of miniature photomultipliers (FEU-58, FEU-60, FEU-114-1, FEU-147-1, and R-1635 (Hamamatsu, Japan)), which were obtained with a 106 Ru radioactive source and standard plastic scintillators of two types, based on oxazoles in polystyrene and in polymethylmethacrylate

  12. Associated-particle sealed-tube neutron generators and hodoscopes for NDA applications

    International Nuclear Information System (INIS)

    Rhodes, E.; Peters, C.W.

    1991-01-01

    With radioisotope sources, gamma-ray transmission hodoscopes can inspect canisters and railcars to monitor rocket motors, can detect nuclear warheads by their characteristic strong gamma-ray absorption, or can count nuclear warheads inside a missile by low-resolution tomography. Intrinsic gamma-ray radiation from warheads can also be detected in a passive mode. Neutron hodoscopes can use neutron transmission, intrinsic neutron emission, or reactions stimulated by a neutron source, in treaty verification roles. Gamma-ray and neutron hodoscopes can be combined with a recently developed neutron diagnostic probe system, based on a unique associated-particle sealed-tube neutron generator (APSTNG) that interrogates the object of interest with a low-intensity beam of 14-MeV neutrons, and that uses flight-time to electronically collimate transmitted neutrons and to tomographically image nuclides identified by reaction gamma-rays. Gamma-ray spectra of resulting neutron reactions identify nuclides associated with all major chemicals in chemical warfare agents, explosives, and drugs, as well as many pollutants and fissile and fertile special nuclear material. 5 refs., 12 figs

  13. BATATA: a buried muon hodoscope

    International Nuclear Information System (INIS)

    Sanchez, F.; Supanitsky, A. D.; Medina-Tanco, G.; Paic, G.; Salazar, M. E. Patino; D'Olivo, J. C.; Molina, R. Alfaro

    2009-01-01

    Muon hodoscopes have several applications, ranging from astrophysics to fundamental particle physics. In this work, we present a detector dedicated to the study, at ground level, of the main signals of cosmic-ray induced showers above 6 PeV. The whole detector is composed by a set of three parallel dual-layer scintillator planes buried at fix depths ranging from 120 g/cm 2 to 600 g/cm 2 and by a triangular array of water cerenkov detectors located nearby on ground.

  14. Scintillation hodoscopes on the basis of hodoscopic photomultipliers using scintillation fibers

    International Nuclear Information System (INIS)

    Alimova, T.V.; Vasil'chenko, V.G.; Vechkanov, G.N.

    1986-01-01

    Scintillation hodoscopes characteristics and their design features have been considered. The space resolution for hodoscopes consisting of 4 layers of scintillation fibres 200 mm long and 1 mm in diameter is 0.4-0.6 mm. With 2 fibres layer 1 m long and 3.8 mm in diameter the space resolution 3 mm has been obtained. A possibility to construct 0.1 mm resolution scintillation hodoscopes is discussed

  15. Scintillation hodoscope with 50x50 cm2 sensitive area on the basis of hodoscopic FEhU's

    International Nuclear Information System (INIS)

    Borog, V.V.; Dronov, V.V.; Vasil'chenko, V.G.; Rykalin, V.I.; Demekhin, A.B.

    1986-01-01

    The problems of choosing optimal constructions of sensitive elements of large hodoscopes on the base of hodoscopic photamultipliers are considered. The obtained results of numerical calculations for choosing optimal constructions and materials of hodoscope elements are confirmed by the results of the performed measurements. The measured spatial resolution of one of constructions of scintillation hodoscopes with the 50x50x2 cm 3 sensitive volume using two hodoscopic photomultipliers constituted ±3 mm

  16. Construction and test of a scintillator hodoscope for the CREAM experiment

    International Nuclear Information System (INIS)

    Marrocchesi, P.S.; Bagliesi, M.G.; Basti, A.; Bigongiari, G.; Lomtadze, T.; Maestro, P.; Meucci, M.; Millucci, V.; Morsani, F.; Ahn, H.S.; Ganel, O.; Lee, M.H.; Lutz, L.; Seo, E.S.; Zinn, S.Y.

    2004-01-01

    CREAM (Cosmic Ray Energetics And Mass) is a balloon-borne experiment being prepared for the first flight which is scheduled for the end of 2004 from Antarctica. It is designed to perform direct measurements of cosmic ray composition over the elemental range from proton to iron to the supernova energy scale of 10 15 eV in a series of balloon flights using the new Ultra Long Duration Balloon (ULDB) capability under development by NASA. The instrument includes a sampling tungsten/scintillating fiber calorimeter preceded by a graphite target with scintillating fiber hodoscopes, a pixelated silicon charge detector, a transition radiation detector and a segmented timing-based particle-charge detector. The hodoscope system provides track reconstruction capability by means of 4 orthogonal layers of fibers (S0,S1) on top of the carbon target and 2 additional layers (S2) located in between the upper and lower target sections. Its construction technique and beam test results are presented

  17. Recent activities of the CABRI hodoscope

    International Nuclear Information System (INIS)

    Helmick, H.H.; Baumung, K.; Boehnel, K.

    1982-01-01

    The present status of the CABRI hodoscope capability and how it serves as a diagnostic aid in the CABRI Fast Reactor Safety Research Project at Cadarache, France, is reported. A brief description of the 51-channel-high by 3-channel-wide neutron hodoscope is given and data reduction methods are described. Calibration requirements and counting system deadtime measurement techniques are discussed. Examples are given showing the results of single fuel pin experiments where fuel pin failure occurred and subsequent fuel motion is observed. Computer-generated graphic displays show the evolution of fuel motion in time in both two- and three-dimensional perspective illustrations. Results from several experiments are presented

  18. Performance review: neutron hodoscope at TREAT

    International Nuclear Information System (INIS)

    Stanford, G.S.; DeVolpi, A.; Fink, C.L.; Regis, J.P.; Rhodes, E.A.; Stewart, R.R.

    1976-01-01

    The current fuel-motion-detection capabilities of the neutron hodoscopes at TREAT are outlined and discussed, including such topics as spatial and fuel-density resolution, dynamic range, and corrections for detector dead time and supralinearity. Capabilities and analytical techniques are illustrated with examples from several of the power-transient experiments that have been run in the TREAT reactor

  19. Scintillating optical fibers for fine-grained hodoscopes

    International Nuclear Information System (INIS)

    Borenstein, S.R.; Strand, R.C.

    1981-01-01

    Fast detectors with fine spatial resolution will be needed to exploit high event rates at ISABELLE. Scintillating optical fibers for fine grained hodoscopes have been developed by the authors. A commercial manufacturer of optical fibers has drawn and clad PVT scintillator. Detection efficiencies greater than 99% have been achieved for a 1 mm fiber with a PMT over lengths up to 60 cm. Small diameter PMT's and avalanche photodiodes have been tested with the fibers. Further improvements are sought for the fiber and for the APD's sensitivity and coupling efficiency with the fiber

  20. A Geant4 evaluation of the Hornyak button and two candidate detectors for the TREAT hodoscope

    Science.gov (United States)

    Fu, Wenkai; Ghosh, Priyarshini; Harrison, Mark J.; McGregor, Douglas S.; Roberts, Jeremy A.

    2018-05-01

    The performance of traditional Hornyak buttons and two proposed variants for fast-neutron hodoscope applications was evaluated using Geant4. The Hornyak button is a ZnS(Ag)-based device previously deployed at the Idaho National Laboratory's TRansient REActor Test Facility (better known as TREAT) for monitoring fast neutrons emitted during pulsing of fissile fuel samples. Past use of these devices relied on pulse-shape discrimination to reduce the significant levels of background Cherenkov radiation. Proposed are two simple designs that reduce the overall light guide mass (here, polymethyl methacrylate or PMMA), employ silicon photomultipliers (SiPMs), and can be operated using pulse-height discrimination alone to eliminate background noise to acceptable levels. Geant4 was first used to model a traditional Hornyak button, and for assumed, hodoscope-like conditions, an intrinsic efficiency of 0.35% for mono-directional fission neutrons was predicted. The predicted efficiency is in reasonably good agreement with experimental data from the literature and, hence, served to validate the physics models and approximations employed. Geant4 models were then developed to optimize the materials and geometries of two alternatives to the Hornyak button, one based on a homogeneous mixture of ZnS(Ag) and PMMA, and one based on alternating layers of ZnS(Ag) and PMMA oriented perpendicular to the incident neutron beam. For the same radiation environment, optimized, 5-cm long (along the beam path) devices of the homogeneous and layered designs were predicted to have efficiencies of approximately 1.3% and 3.3%, respectively. For longer devices, i.e., lengths larger than 25 cm, these efficiencies were shown to peak at approximately 2.2% and 5.9%, respectively. Moreover, both designs were shown to discriminate Cherenkov noise intrinsically by using an appropriate pulse-height discriminator level, i.e., pulse-shape discrimination is not needed for these devices.

  1. Fine grained hodoscopes based on scintillating optical fibres

    International Nuclear Information System (INIS)

    Borenstein, S.R.; Strand, R.C.

    1985-01-01

    This is a description of the development and testing of scintillating optical fibers for use in a fine grained hodoscope for experiments in High Energy Physics. After a brief discussion of the need for such a device in experiments in high rate environments, a description is given of the process of drawing and cladding plastic scintillator to form scintillating optical fibers. This is followed by a description of the test procedures used to evaluate the resultant fibers both in the laboratory and at the accelerator. A discussion of three possible readout schemes then follows. These are individual photomultiplier tubes, avalanche photo-diodes and microchannel plates with segmented anodes. The results of this study are then presented. The present status of the project is then summarized, in which it is pointed out that significant improvement in useful fiber length has been achieved as a result of this development program. The difficulty of quality control in fiber production remains a serious limitation, and a satisfactory readout scheme with good optical coupling between many hodoscope elements and photodetectors has yet to be achieved. (orig.)

  2. A large area diamond-based beam tagging hodoscope for ion therapy monitoring

    Science.gov (United States)

    Gallin-Martel, M.-L.; Abbassi, L.; Bes, A.; Bosson, G.; Collot, J.; Crozes, T.; Curtoni, S.; Dauvergne, D.; De Nolf, W.; Fontana, M.; Gallin-Martel, L.; Hostachy, J.-Y.; Krimmer, J.; Lacoste, A.; Marcatili, S.; Morse, J.; Motte, J.-F.; Muraz, J.-F.; Rarbi, F. E.; Rossetto, O.; Salomé, M.; Testa, É.; Vuiart, R.; Yamouni, M.

    2018-01-01

    The MoniDiam project is part of the French national collaboration CLaRyS (Contrôle en Ligne de l'hAdronthérapie par RaYonnements Secondaires) for on-line monitoring of hadron therapy. It relies on the imaging of nuclear reaction products that is related to the ion range. The goal here is to provide large area beam detectors with a high detection efficiency for carbon or proton beams giving time and position measurement at 100 MHz count rates (beam tagging hodoscope). High radiation hardness and intrinsic electronic properties make diamonds reliable and very fast detectors with a good signal to noise ratio. Commercial Chemical Vapor Deposited (CVD) poly-crystalline, heteroepitaxial and monocrystalline diamonds were studied. Their applicability as a particle detector was investigated using α and β radioactive sources, 95 MeV/u carbon ion beams at GANIL and 8.5 keV X-ray photon bunches from ESRF. This facility offers the unique capability of providing a focused ( 1 μm) beam in bunches of 100 ps duration, with an almost uniform energy deposition in the irradiated detector volume, therefore mimicking the interaction of single ions. A signal rise time resolution ranging from 20 to 90 ps rms and an energy resolution of 7 to 9% were measured using diamonds with aluminum disk shaped surface metallization. This enabled us to conclude that polycrystalline CVD diamond detectors are good candidates for our beam tagging hodoscope development. Recently, double-side stripped metallized diamonds were tested using the XBIC (X Rays Beam Induced Current) set-up of the ID21 beamline at ESRF which permits us to evaluate the capability of diamond to be used as position sensitive detector. The final detector will consist in a mosaic arrangement of double-side stripped diamond sensors read out by a dedicated fast-integrated electronics of several hundreds of channels.

  3. Muon Hodoscope URAGAN as a New Meteorological Tool

    International Nuclear Information System (INIS)

    Barbashina, N.; Petrukhin, A.; Yashin, I.

    2017-01-01

    Muon diagnostics is a new direction in the development of the global environment observation system based on the analysis of variations of the penetrating component of cosmic rays. The approach is based on the simultaneous detection of muon fluxes from all directions of the upper hemisphere (hodoscopic mode). It allows to get an overall picture of the processes in the upper troposphere, as well as to follow the dynamics of their changes, in particular, to identify disturbed areas, to determine the direction and the speed of their movement, and to estimate the time of their appearance in a given point. The method is sensitive to large-scale atmospheric processes, as well as to the rapidly changing local phenomena and, in addition, allows to explore the characteristics of wave processes, generated by strong turbulent events, including potentially dangerous (storms, squalls, tornadoes, hurricanes, etc.). Method of muon diagnostics has been implemented with the wide aperture muon hodoscope (MH) URAGAN with a high spatial and angular accuracy, which was constructed in MEPhI. In the paper, a short description of MH URAGAN is given and the results of investigation of various atmospheric processes are discussed. (author)

  4. Fine-grained hodoscopes based on scintillating optical fibers

    International Nuclear Information System (INIS)

    Borenstein, S.R.; Strand, R.C.

    1981-01-01

    In order to exploit the high event rates at ISABELLE, it will be necessary to have fast detection with fine spatial resolution. The authors are currently constructing a prototype fine-grained hodoscope, the elements of which are scintillating optical fibers. The fibers have been drawn from commercially available plastic scintillator which has been clad with a thin layer of silicone. So far it has been demonstrated with one mm diameter fibers, that with a photodetector at each end, the fibers are more than 99% efficient for lengths of about 60 cm. The readout will be accomplished either with small diameter photomultiplier tubes or avalanche photodiodes used either in the linear or Geiger mode. The program of fiber development and evaluation is described. The status of the APD as a readout element is discussed, and an optical encoding readout scheme is described for events of low multiplicity

  5. Improvements in TREAT hodoscope fuel-motion capabilities

    International Nuclear Information System (INIS)

    Fink, C.L.; Boyar, R.E.; Eichholz, J.J.; DeVolpi, A.

    1982-01-01

    The fast-neutron detection system of the hadoscope has been a major ingredient in the success of the hodoscope as a fuel-motion monitoring device. While the original Hornyak-button detector system has met most of the current fuel-motion needs, the more stringent requirements of improved reactor-safety codes, and of new experimental test facilities necessitate improved detection capabilities. Development efforts have centered on three areas: the construction of an array of proton-recoil proportional counters to be used in conjunction with the Hornyak-button detectors, the upgrading of the Hornyak-button detectors to increase linearity and signal-to-background ratio, and the intercalibration of detectors using a modified horizontal and a new vertical scan system

  6. Wide aperture scintillation hodoscope with FEU-143 photomultipliers

    International Nuclear Information System (INIS)

    Afanas'ev, L.G.; Ivanov, M.A.; Karpukhin, V.V.; Komarov, V.I.; Kulikov, A.V.; Yazkov, V.V.

    1993-01-01

    Scintillation hodoscopes with FEU-143 photomultipliers are described. Every of two hodoscopes consists of 8 elements each of length 1400 mm and cross section 56x56 mm. The time and amplitude characteristics were obtained in real conditions of the physical experiment at the Protvino U-70 accelerator. A resolution on time difference between hits of two hodoscopes is 224 ps. A separation of pions and protons by their ionization losses is also provided at momenta less than 1000 MeV/c. 5 refs.; 8 figs.; 1 tab

  7. SHMS Hodoscopes and Time of Flight System

    Science.gov (United States)

    Craycraft, Kayla; Malace, Simona

    2017-09-01

    As part of the Thomas Jefferson National Accelerator Facility's (Jefferson Lab) upgrade from 6 GeV to 12 GeV, a new magnetic focusing spectrometer, the Super High Momentum Spectrometer (SHMS), was installed in experimental Hall C. The detector stack consists of horizontal drift chambers for tracking, gas Cerenkov and Aerogel detectors and a lead glass calorimeter for particle identification. A hodoscope system consisting of three planes of scintillator detectors (constructed by James Madison University) and one plane of quartz bars (built by North Carolina A&T State University) is used for triggering and time of flight measurements. This presentation consists of discussion of the installation, calibration, and characterization of the detectors used in this Time of Flight system. James Madison University, North Carolina A&T State University.

  8. Plastic scintillator-based hodoscope for the characterization of large ...

    Indian Academy of Sciences (India)

    Plastic scintillator-based hodoscope for the characterization of large-area resistive plate chambers. V K S KASHYAP C YADAV ... Keywords. Plastic scintillators; resistive plate chambers. ... Pramana – Journal of Physics | News. © 2017 Indian ...

  9. TREAT hodoscope interpretation. II. Fuel-state identification

    International Nuclear Information System (INIS)

    Wu, R.M.; Omberg, R.P.; Albrecht, R.W.

    1982-01-01

    By using the autoregressive-integrated-moving-average (ARIMA) process, the onset of fuel disposal and the restructured fuel states of a TREAT test can be unambiguously identified. The results of the ARIMA analyses on the TREAT L7 hodoscope data show the most probable time of the restructuring began at 14.038 seconds, and four restructured fuel states are required to interpret adequately the L7 hodoscope data

  10. Image processing and resolution restoration of fast-neutron hodoscope data

    International Nuclear Information System (INIS)

    Rhodes, E.A.; DeVolpi, A.

    1982-01-01

    The fast-neutron hodoscope is a cineradiographic device that monitors fuel motion within thick opaque test capsules during radiation transients at the Transient Reactor Test Facility reactor which simulate accident conditions in power reactors. By means of a collimator and detector array, emissive neutron radiographic digital data is collected in time-resolved and static (scan) modes. Data is digitally reconstructed into raidographic images and used directly for quantitative analysis. Spatial resolution is adequate in most cases, but is marginal for a few experiments. Collimator repositioning, scan increment size-reduction, and deconvolution algorithms are being applied to improve resolution of existing collimators

  11. Design studies of a proton-pion hodoscope

    International Nuclear Information System (INIS)

    Charagi, S.K.; Gupta, S.K.; Chatterjee, A.

    1987-01-01

    The considerations for the design of a detector assembly for detecting pions and protons resulting from the decay of Δ + in the reaction 6 Li(p,Δ ++ ) 6 He at 400-500 MeV are discussed. The details of a computer program to calculate efficiencies for different hodoscope geometries and numerical results for some specific cases are given. A method for reconstructing the full kinematics of a reaction event from the position information of particle hits in the hodoscope is presented. (author)

  12. Quantitative fuel motion determination with the CABRI fast neutron hodoscope

    International Nuclear Information System (INIS)

    Baumung, K.; Augier, G.

    1991-01-01

    The fast neutron hodoscope installed at the CABRI reactor in Cadarache, France, is employed to provide quantitative fuel motion data during experiments in which single liquid-metal fast breeder reactor test pins are subjected to simulated accident conditions. Instrument design and performance are reviewed, the methods for the quantitative evaluation are presented, and error sources are discussed. The most important findings are the axial expansion as a function of time, phenomena related to pin failure (such as time, location, pin failure mode, and fuel mass ejected after failure), and linear fuel mass distributions with a 2-cm axial resolution. In this paper the hodoscope results of the CABRI-1 program are summarized

  13. Flexible geometry hodoscope using proportional chamber cathode read-out

    International Nuclear Information System (INIS)

    Aubret, C.; Bellefon, A. de; Benoit, P.; Brunet, J.M.; Tristram, G.

    1978-01-01

    The construction of a cathode read-out proportional chamber, used as a low mass hodoscope is described. Results on efficiency, time resolution and space resolution are shown. The associative logic, which permits the use of the chamber as a coplanarity chamber is briefly presented

  14. Experimental study and by Monte Carlo of a prototype of hodoscopic of fibre optics for high resolution applications

    International Nuclear Information System (INIS)

    Granero, D.; Blasco, J. M.; Sanchis, E.; Gonzalez, V.; Martin, J. D.; Ballester, F.; Sanchis, E.

    2013-01-01

    The purpose of this work is to test the response of a system composed of 21 scintillators radiation fibres and its electronics as proof of the validity of the System. For this it has radiated test system with a source of verification of Sr-90. In addition, performed Monte Carlo simulations of the system by comparing the results of the simulations with those obtained experimentally. Moreover taken an approximation to the behavior of a hodoscopic composed of 100 scintillators, transverse fibers between if, in proton therapy, conducting different Monte Carlo simulations. (Author)

  15. TOPAS 1 - construction and test of a scintillation counter hodoscope for the tagging of bremsstrahlung photons for the SAPHIR detector

    International Nuclear Information System (INIS)

    Merkel, R.

    1989-09-01

    The development of a tagging-hodoscope for the SAPHIR-detector at the stretcher ring ELSA in Bonn is described. The hodoscope covers the energy range 2.175 GeV γ 0 =3.500 GeV. 24 scintillation counters are used for the determination of the photon energy, giving a resolution of ΔE γ =25 MeV. The tagging method requires a good coincidence timing resoluting τ between the tagging hodoscope and the detector for the photon-induced reactions in order to keep the accidental coincidences low. The timing information is given by 8 fast timing counters (40 mm thick), covering 5 up to 7 energy channels each. Fluctuations of the timing signal which result from different impact-locations on the timing counter, due to different light travelling distances, are corrected by the energy defining counters. The timing-component (8 timing counters) is commpleted and tested. The results of first mesurements show an upper limit of σ=250 psec for the resolution of 7 coincidences out of 45 possible channels in the tagging hodscope. These results are obtained with a preliminary adjustment of the SAPHIR beam-line and with a not yet optimized signal to noize ratio in the extracted beam. We hope to obtain a σ<200 psec under optimized conditions. (orig.)

  16. Development of radiation immunology

    International Nuclear Information System (INIS)

    Xie Yi; Dang Bingrong; Bing Tao; Zhang Hong; Li Wenjian; Liu Bing

    2005-01-01

    Radiation immunology as a new subject has made a great progress in recent years, especially in the radiation hormesis. At the same time, the research of radiobiological effect on heavy ions has played an important role in the cancer therapy, especially on the radiation immunology of heavy ions in the outer space. In this review, the authors summarized the status and development of radiation-immunology, and try to find out some better ways which can increase efficient killing on tumours, but reduce the damages on normal tissues. (authors)

  17. Radiation Safety for Sustainable Development

    International Nuclear Information System (INIS)

    2015-10-01

    The objective of radiation safety is Assessments of Natural Radioactivity and its Radiological. The following topics were discussed during the conference: AFROSAFE Championing Radiation Safety in Africa, Radiation Calibration, and Development and Validation of a Laser Induced Breakdown Spectrometry Method for Cancer Detection and Characterization. Young Generation in NUCLEAR Initiative to Promote Nuclear Science and Technology, Radiation Protection Safety Culture and Application of Nuclear Techniques in Industry and the Environment were discuss. Rapid Chemometric X-Ray Fluorescence approaches for spectral Diagnostics of Cancer utilizing Tissue Trace Metals and Speciation profiles. Fundamental role of medical physics in Radiation Therapy

  18. Development of radiation alarm monitor

    International Nuclear Information System (INIS)

    Myung Jae Song; Myung Chan Lee; Jung Kwan Son

    1997-01-01

    The Radiation Alarm Monitor is developed domestically in order to protect radiation workers from over exposure. The Radiation Alarm Monitor with microprocessor installed can record the information of radiation field before and after accidents. It can also provide the data to analyze the accident and to set a counterplan. It features a wide detection range of radiation (I OmR/h - I OOR/h), radiation work and data storage, portability, high precision (5%) due to calibration, and adaptation of a powerful alarm system. In order to protect workers from over exposure, light and sound alarm had been designed to initiate when accident occurs such as an unexpected change of radiation field such as radiation rate and accumulated dosed between 90 min. before the alarm and 30 min. after the alarm. In addition, the Radiation Alarm Monitor interfaces with computer so that the accident can be analyzed. After the testing conditions in other countries for the Radiation Alarm Monitor were compared, the most stringent test, ANSI N42. 17-A, was selected. The performance testing was car-ried out under various conditions of temperature, humidity, vibration and electromagnetic wave hindrance by Korea Research Institute of Standards and Science (KRISS). As a result, the Radiation Alan-n Monitor passed all test. Also, for the Radiation Alarm Monitor, environmental adaptability tests under the environmental conditions of NPP sites had been performed. The Radiation Alan-n Monitor had been reviewed by radiation workers at NPPs and their opinions had been collected. Operating procedure will be written and distributed to every NPP sites. Radiation Alarm Monitor will be modified for use under the specific environmental conditions of each site. It will be distributed to NPP sites and will be used by radiation workers

  19. One of the eight sectors of the V0A trigger hodoscope.

    CERN Multimedia

    2005-01-01

    One of the eight sectors of the V0A trigger hodoscope is shown here illuminated with UV light. The light of the scintillator pieces is piped out to the photomultipliers with wave-lenght shifting fibers which glow blue-green in the picture.

  20. Gamma-ray scintillation counter hodoscope for the experiment S140

    CERN Multimedia

    CERN PhotoLab

    1975-01-01

    The experiment S140 was set-up in the East Hall (beam p14) by the CERN-Munich-Cracow Collaboration to study the production by negative kaons of a neutral meson associated to a Lambda. Here, the liquid hydrogen target (inside the horizontal black tube) is withdrawn from the surrounding cylindrical gamma-ray-measuring scintillation counter hodoscope.

  1. Status of the Melbourne experimental particle physics DAQ, silicon hodoscope and readout systems

    International Nuclear Information System (INIS)

    Moorhead, G.F.

    1995-01-01

    This talk will present a brief review of the current status of the Melbourne Experimental Particle Physics group's primary data acquisition system (DAQ), the associated silicon hodoscope and trigger systems, and of the tests currently underway and foreseen. Simulations of the propagation of 106-Ru β particles through the system will also be shown

  2. Radiation chemistry in development and research of radiation biology

    International Nuclear Information System (INIS)

    Min Rui

    2010-01-01

    During the establishment and development of radiation biology, radiation chemistry acts like bridge which units the spatial and temporal insight coming from radiation physics with radiation biology. The theory, model, and methodology of radiation chemistry play an important role in promoting research and development of radiation biology. Following research development of radiation biology effects towards systems radiation biology the illustration and exploration both diversity of biological responses and complex process of biological effect occurring remain to need the theory, model, and methodology come from radiation chemistry. (authors)

  3. Radiation blistering: recent developments

    International Nuclear Information System (INIS)

    Kaminsky, M.; Das, S.K.

    1978-01-01

    Different metals have been proposed for radiation blistering of metals. For example, for the formation of blisters on helium bombarded metal surfaces such models are based on the coalescence of gas bubbles and the build-up of excess gas pressure in the implant region, causing large enough stresses for the occurrence of plastic deformation of the surface regions; or the percolation of helium in the lattice; or the build-up of large, lateral stresses in the implant layer causing buckling. These models are critically reviewed in the light of recent experimental results. A discussion of blistering effects at high doses is included

  4. Precision machining and polishing of scintillating crystals for large calorimeters and hodoscopes

    International Nuclear Information System (INIS)

    Wuest, C.R.; Fuchs, B.A.

    1993-05-01

    New machining and polishing techniques have been developed for large barium fluoride scintillating crystals that provide crystalline surfaces without sub-surface damage or deformation as verified by Atomic Force Microscopy (AFM) and Rutherford Back-scattering (RBS) analyses. Surface roughness of about 10--20 angstroms and sub-micron mechanical tolerances have been demonstrated on large crystal samples. Mass production techniques have also been developed for machining and polishing up to five 50 cm long crystals at one time. We present this technology along with surface studies of barium fluoride crystals polished with this technique. This technology is applicable for a number of new crystal detectors proposed at Colliders including the Barium Fluoride Electromagnetic Calorimeter at SSC, the Crystal Clear Collaboration's cerium fluoride calorimeter at LHC, and the KTeV and PHENIX scintillating hodoscopes at Fermilab, and RHIC, respectively. Lawrence Livermore National Laboratory (LLNL) has an active program of study on barium fluoride scintillating crystals for the Barium Fluoride Electromagnetic Calorimeter Collaboration and cerium fluoride and lead fluoride for the Crystal Clear Collaboration. This program has resulted in a number of significant improvements in the mechanical processing, polishing and coating of fluoride crystals. Techniques have been developed using diamond-loaded pitch lapping that can produce 15 angstrom RMS surface finishes over large areas. Also, special polishing fixtures have been designed based on mounting technology developed for the 1.1 m diameter optics used in LLNL's Nova Laser. These fixtures allow as many as five 25--50 cm long crystals to be polished and lapped at the same time with tolerances satisfying the stringent requirements of crystal calorimeters. We also discuss results on coating barium fluoride with UV reflective layers of magnesium fluoride and aluminum

  5. Development of Radiation Fusion Biotechnology

    International Nuclear Information System (INIS)

    Jo, Sung Kee; Lee, Ju Woon; Park, Sang Hyun

    2010-04-01

    · Development of Radiation Fusion Technology with Food Technology by the Application of High Dose Irradiation - To develop fundamental technology using high dose irradiation, effects of high dose irradiation on food components, combined effects of irradiation with food engineering, irradiation condition to destroy radiation resistant foodborne bacteria were studied. - To develop E-beam irradiation technology, irradiation conditions for E-beam and domination effects of E-beam irradiation were determined. The physical marker for E-beam irradiated foods or not was developed. - To develop purposed foods to extreme environmental, ready-to-eat foods and low toxic animal feeds were developed. Through the fundamental researches, the legislation for new irradiated foods and application of E-beam was introduced. · Development of modulators against degenerative aging using radiation fusion technology - Confirmation of similarity of radiation-induced aging and normal aging by comparative analysis study - Selection of degenerative aging biomarkers related to immune/hematopoiesis, oxidative damage, molecular signaling, lipid metabolism - Establishment of optimal radiation application conditions for aging modeling - Validation of biomarkers and models using substances · Development of biochips and kits using RI detection technology for life science - Establishment of kinase-substrate interaction analysis using RI detection technique (More than 30 times detection sensitivity compared to conventional fluorescence detection techniques). - The RI detection technique reduces the overall experiment time, as the use of blocking agent can be avoided, offer minimum non-specific binding, and facilitates a rapid data analysis with a simplify the process of chip manufacturing

  6. Scintillating plastic fibers as light pipes for a cosmic ray hodoscope: Feasibility calculations and measured attenuation characteristics

    Science.gov (United States)

    1976-01-01

    A candidate hodoscope uses arrays of scintillator fibers, followed by an image intensifier and imaging system such as that proposed for the X-ray shadowgraph. A literature search was performed to ascertain the experience of other workers with hodoscopes using this or similar principles. Calculations were performed to determine the feasibility of candidate systems and some laboratory experiments were performed to attempt to check these numbers.

  7. Development of Radiation Fusion Biotechnology

    Energy Technology Data Exchange (ETDEWEB)

    Jo, Sung Kee; Lee, Ju Woon; Park, Sang Hyun

    2010-04-15

    {center_dot} Development of Radiation Fusion Technology with Food Technology by the Application of High Dose Irradiation - To develop fundamental technology using high dose irradiation, effects of high dose irradiation on food components, combined effects of irradiation with food engineering, irradiation condition to destroy radiation resistant foodborne bacteria were studied. - To develop E-beam irradiation technology, irradiation conditions for E-beam and domination effects of E-beam irradiation were determined. The physical marker for E-beam irradiated foods or not was developed. - To develop purposed foods to extreme environmental, ready-to-eat foods and low toxic animal feeds were developed. Through the fundamental researches, the legislation for new irradiated foods and application of E-beam was introduced. {center_dot} Development of modulators against degenerative aging using radiation fusion technology - Confirmation of similarity of radiation-induced aging and normal aging by comparative analysis study - Selection of degenerative aging biomarkers related to immune/hematopoiesis, oxidative damage, molecular signaling, lipid metabolism - Establishment of optimal radiation application conditions for aging modeling - Validation of biomarkers and models using substances {center_dot} Development of biochips and kits using RI detection technology for life science - Establishment of kinase-substrate interaction analysis using RI detection technique (More than 30 times detection sensitivity compared to conventional fluorescence detection techniques). - The RI detection technique reduces the overall experiment time, as the use of blocking agent can be avoided, offer minimum non-specific binding, and facilitates a rapid data analysis with a simplify the process of chip manufacturing

  8. Hodoscope read-out with space-time mapping through an optical pipeline

    International Nuclear Information System (INIS)

    Bamberger, A.; Boehler, E.; Kroeger, W.; Soeldner-Rembold, S.

    1993-09-01

    This note describes a new read-out scheme for fine grained hodoscopes with possible applications for a Small Angle Rear Tracking Detector (SRTD) or a pre-sampler in front of the ZEUS Uranium Calorimeter. Several hodoscope strips are read out by one phototube using optical fibres of different lengths. Optical delays of equal increments ensure a linear mapping of the space coordinate onto the time coordinate. A first prototype has been built and first test measurements are being presented. In addition, Monte Carlo simulations were performed to study the effects of showering electrons on the position resolution of the detector. The results of the test measurements, especially those related to the properties of the light guides, and the results of the simulation are of general importance for the SRTD design beyond the optical delay read-out scheme presented here. (orig.)

  9. Powerful non-geoeffective interplanetary disturbance of July 2012 observed by muon hodoscope URAGAN

    Science.gov (United States)

    Astapov, I. I.; Barbashina, N. S.; Petrukhin, A. A.; Shutenko, V. V.; Veselovsky, I. S.

    2015-12-01

    The most powerful coronal mass ejection of the 24th solar cycle took place on the opposite side of the Sun on July 23, 2012 and had no geomagnetic consequences. Nevertheless, as a result of passing of the ejection through the heliosphere, variations of galactic cosmic rays flux were observed on the Earth. These variations were registered by the muon hodoscope URAGAN (MEPhI, Moscow). Muon flux angular distributions on the Earth's surface are reported and analyzed.

  10. Determination of the efficiency of the hodoscopes during the Drell-Yan run

    CERN Document Server

    Lobert, Lukas

    2016-01-01

    The COMPASS trigger system is mainly composed of fast plastic scintillators working as hodoscopes. For the selection of events of physical interest during the COMPASS Drell-Yan run in 2015 it was configured to trigger single- and dimuon-events. Unbiased trigger decisions can be used to determine the efficiency of the six symmetrically oriented hodoscopes used in 2015. The unbiasedness of the trigger is based on the usage of the hadron calorimeter trigger (CT) which was used on two dates during the run: The first time in the beginning and the second one in the middle respectively. Due to different beam conditions between the two dates a direct comparison between the results is unfortunately difficult. Especially in the beginning of the run, most of the strips of different hodoscopes show between 90% and often even 100%-efficiency. Compared to the results from the middle of the run, the efficiency of several strips seemed to get much worse during this time. Furthermore it can be seen that the method of determin...

  11. The CABRI fast neutron Hodoscope: Renovation, qualification program and first results following the experimental reactor restart

    Science.gov (United States)

    Chevalier, V.; Mirotta, S.; Guillot, J.; Biard, B.

    2018-01-01

    The CABRI experimental pulse reactor, located at the Cadarache nuclear research center, southern France, is devoted to the study of Reactivity Initiated Accidents (RIA). For the purpose of the CABRI International Program (CIP), managed and funded by IRSN, in the framework of an OECD/NEA agreement, a huge renovation of the facility has been conducted since 2003. The Cabri Water Loop was then installed to ensure prototypical Pressurized Water Reactor (PWR) conditions for testing irradiated fuel rods. The hodoscope installed in the CABRI reactor is a unique online fuel motion monitoring system, operated by IRSN and dedicated to the measurement of the fast neutrons emitted by the tested rod during the power pulse. It is one of the distinctive features of the CABRI reactor facility, which is operated by CEA. The system is able to determine the fuel motion, if any, with a time resolution of 1 ms and a spatial resolution of 3 mm. The hodoscope equipment has been upgraded as well during the CABRI facility renovation. This paper presents the main outcomes achieved with the hodoscope since October 2015, date of the first criticality of the CABRI reactor in its new Cabri Water Loop configuration. Results obtained during reactor commissioning phase functioning, either in steady-state mode (at low and high power, up to 23 MW) or in transient mode (start-up, possibly beyond 20 GW), are discussed.

  12. Experimental study and by Monte Carlo of a prototype of hodoscopic of fibre optics for high resolution applications; Estudio experimental y por Monte Carlo de un prototipo de hodoscopio de fibras opticas para aplicaciones de alta resolucion

    Energy Technology Data Exchange (ETDEWEB)

    Granero, D.; Blasco, J. M.; Sanchis, E.; Gonzalez, V.; Martin, J. D.; Ballester, F.; Sanchis, E.

    2013-07-01

    The purpose of this work is to test the response of a system composed of 21 scintillators radiation fibres and its electronics as proof of the validity of the System. For this it has radiated test system with a source of verification of Sr-90. In addition, performed Monte Carlo simulations of the system by comparing the results of the simulations with those obtained experimentally. Moreover taken an approximation to the behavior of a hodoscopic composed of 100 scintillators, transverse fibers between if, in proton therapy, conducting different Monte Carlo simulations. (Author)

  13. Development of delayed radiation necrosis

    International Nuclear Information System (INIS)

    Ohara, ShigFeki; Takagi, Terumasa; Shibata, Taichiro; Nagai, Hajime.

    1983-01-01

    The authors discussed the developing process of delayed radiation necrosis of the brain from the case of a 42-year-old female who developed intracranial hypertension and left hemiparesis 5 and a half years after radiotherapy for pituitary adenoma. The initial sign of radiation necrosis was from a CT scan taken 3 and a half years after radiotherapy showing an irregular low density lesion in the right temporal lobe. CT scan 2 years later demonstrated displacement of the midline structures to the left and a larger low density lesion with partially high density in the right MCA territory that was enhanced with intravenous contrast medium. Recovery after a right temporal lobectomy and administration of steroid hormone were uneventful. Eight months later there were no signs of raised intracranial pressure nor of neurological deficits. Tissues obtained from the right temporal lobe at lobectomy revealed the characteristic changes of delayed radiation necrosis; a mixture of fresh, recent, and old vascular lesions in the same specimen. From these findings, it was speculated that delayed radiation necrosis might initially occur within several years after radiotherapy and might gradually take a progressive and extended course, even in cases whose clinical symptoms develop much later. (author)

  14. Development of radiation biological dosimetry

    International Nuclear Information System (INIS)

    Cho, Chul Koo; Kim, Tae Hwan; Lee, Yun Sil; Son, Young Sook; Kim, Soo Kwan; Jang, Won Suk; Le, Sun Joo; Jee, Young Heun; Jung, Woo Jung

    1999-04-01

    Up until now, only a few methods have been developed for radiation biological dosimetry such as conventional chromosome aberration and micronucleus in peripheral blood cell. However, because these methods not only can be estimated by the expert, but also have a little limitation due to need high technique and many times in the case of radiation accident, it is very difficult to evaluate the absorbed dose of victims. Therefore, we should develop effective, easy, simple and rapid biodosimetry and its guideline (triage) to be able to be treated the victims as fast as possible. We established the premature chromosome condensation assay and apoptotic fragment assay which was the significant relationship between dose and cell damages to evaluate the irradiation dose as correct and rapid as possible using lymphocytes and crypt cells, and compared with conventional chromosome aberration assay and micronuclei assay

  15. Development of radiation biological dosimetry

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Chul Koo; Kim, Tae Hwan; Lee, Yun Sil; Son, Young Sook; Kim, Soo Kwan; Jang, Won Suk; Le, Sun Joo; Jee, Young Heun; Jung, Woo Jung

    1999-04-01

    Up until now, only a few methods have been developed for radiation biological dosimetry such as conventional chromosome aberration and micronucleus in peripheral blood cell. However, because these methods not only can be estimated by the expert, but also have a little limitation due to need high technique and many times in the case of radiation accident, it is very difficult to evaluate the absorbed dose of victims. Therefore, we should develop effective, easy, simple and rapid biodosimetry and its guideline (triage) to be able to be treated the victims as fast as possible. We established the premature chromosome condensation assay and apoptotic fragment assay which was the significant relationship between dose and cell damages to evaluate the irradiation dose as correct and rapid as possible using lymphocytes and crypt cells, and compared with conventional chromosome aberration assay and micronuclei assay.

  16. Development of beta reference radiations

    International Nuclear Information System (INIS)

    Wan Zhaoyong; Cai Shanyu; Li Yanbo; Yin Wei; Feng Jiamin; Sun Yuhua; Li Yongqiang

    1997-09-01

    A system of beta reference radiation has been developed, that is composed of 740 MBq 147 Pm beta source, 74 MBq and 740 MBq 90 Sr + 90 Y β sources, compensation filters, a source handling tool, a source jig, spacing bars, a shutter, a control unit and a beta dose meter calibration stand. For 740 MBq 147 Pm and 74 MBq 90 Sr + 90 Y beta reference radiations with compensation filters and 740 MBq 90 Sr + 90 Y beta reference radiation without compensation filter, at 20 cm, 30 cm and 30 cm distance separately; the residual energy of maximum is 0.14 MeV, 1.98 MeV and 2.18 MeV separately; the absorbed dose to tissue D (0.07) is 1.547 mGy/h (1996-05-20), 5.037 mGy/h (1996-05-10) and 93.57 mGy/h (1996-05-15) separately; the total uncertainty is 3.0%, 1.7% and 1.7% separately. For the first and the second beta reference radiation, the dose rate variability in the area of 18 cm diameter in the plane perpendicular to the beta-ray beam axis is within +-6% and +-3% separately. (3 refs., 2 tabs., 8 figs.)

  17. Development of radiation fusion biotechnology

    International Nuclear Information System (INIS)

    Jung, Uhee; Lee, Ju Woon; Park, Sang Hyun

    2012-04-01

    Development of Radiation Fusion Technology with Food Technology by the Application of High Dose Irradiation - To develop fundamental technology using high dose irradiation, effects of high dose irradiation on food components, combined effects of irradiation with food engineering, irradiation condition to destroy radiation resistant foodborne bacteria were studied. - To develop E-beam irradiation technology, irradiation conditions for E-beam and domination effects of E-beam irradiation were determined. The physical marker for E beam irradiated foods or not was developed. - To develop purposed foods to extreme environmental, ready to eat foods and low toxic animal feeds were developed. Through the fundamental researches, the legislation for new irradiated foods and application of E-beam was introduced. Development of modulators against degenerative aging using radiation fusion technology - Selection of 20 kinds of degenerative aging biomarkers related to immune/hematopoiesis, oxidative damage, molecular signaling, lipid metabolism - Establishment of optimal radiation application conditions for aging modeling (fractionated irradiation of total 5Gy, a lapse of 4 months or more - Selection of effective aging modulating substances by screening of 800 natural substances - Development of 1 multi-functional and high-efficacy aging modulator by combination of effective substances and evaluation by in vivo models Development of biochips and kits using RI detection technology for life science - Establishment of kinase substrate interaction analysis using RI detection technique (More than 100 times detection sensitivity compared to conventional fluorescence detection techniques). - The RI detection technique reduces the overall experiment time, as the use of blocking agent can be avoided, offer minimum non specific binding, and facilitates a rapid data analysis with a simplify the process of chip manufacturing. - Establishment of multi-channel type Lab on a chip (LOC) using

  18. Development of radiation fusion biotechnology

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Uhee; Lee, Ju Woon; Park, Sang Hyun

    2012-04-15

    Development of Radiation Fusion Technology with Food Technology by the Application of High Dose Irradiation - To develop fundamental technology using high dose irradiation, effects of high dose irradiation on food components, combined effects of irradiation with food engineering, irradiation condition to destroy radiation resistant foodborne bacteria were studied. - To develop E-beam irradiation technology, irradiation conditions for E-beam and domination effects of E-beam irradiation were determined. The physical marker for E beam irradiated foods or not was developed. - To develop purposed foods to extreme environmental, ready to eat foods and low toxic animal feeds were developed. Through the fundamental researches, the legislation for new irradiated foods and application of E-beam was introduced. Development of modulators against degenerative aging using radiation fusion technology - Selection of 20 kinds of degenerative aging biomarkers related to immune/hematopoiesis, oxidative damage, molecular signaling, lipid metabolism - Establishment of optimal radiation application conditions for aging modeling (fractionated irradiation of total 5Gy, a lapse of 4 months or more - Selection of effective aging modulating substances by screening of 800 natural substances - Development of 1 multi-functional and high-efficacy aging modulator by combination of effective substances and evaluation by in vivo models Development of biochips and kits using RI detection technology for life science - Establishment of kinase substrate interaction analysis using RI detection technique (More than 100 times detection sensitivity compared to conventional fluorescence detection techniques). - The RI detection technique reduces the overall experiment time, as the use of blocking agent can be avoided, offer minimum non specific binding, and facilitates a rapid data analysis with a simplify the process of chip manufacturing. - Establishment of multi-channel type Lab on a chip (LOC) using

  19. Development of environmental radiation control technology

    International Nuclear Information System (INIS)

    Kim, Ingyu; Kim, Enhan; Keum, Dongkwon

    2012-04-01

    To develop the comprehensive environmental radiation management technology, - An urban atmospheric dispersion model and decision-aiding model have been developed. - The technologies for assessing the radiation impact to non-human biota and the environmental medium contamination have developed. - The analytical techniques of the indicator radionuclides related to decommissioning of nuclear facilities and nuclear waste repository have been developed. - The national environmental radiation impact has been assessed, and the optimum management system of natural radiation has been established

  20. arXiv NA62 Charged Particle Hodoscope. Design and performance in 2016 run

    CERN Document Server

    INSPIRE-00577742

    2017-06-27

    The NA62 experiment at CERN SPS aims to measure the branching ratio of the ultra-rare decay K(+) → π(+)νbar nu with 10% accuracy. The experiment operates with a 75 GeV/c high intensity (750 MHz) secondary beam. A new detector, named Charged Particle Hodoscope (CHOD), designed to produce an input signal to the L0 trigger processor for events with charged particles produced in kaon decays, has been assembled, installed, integrated into NA62 Data Acquisition System (DAQ) and commissioned in 2016. During the whole 2016 run the detector has been in continuous operation. Design and performance features of the detector are presented.

  1. Development of local radiation therapy

    International Nuclear Information System (INIS)

    Lee, Seung Hoon; Lim, Sang Moo; Choi, Chang Woon; Chai, Jong Su; Kim, Eun Hee; Kim, Mi Sook; Yoo, Seong Yul; Cho, Chul Koo; Lee, Yong Sik; Lee, Hyun Moo

    1999-04-01

    The major limitations of radiation therapy for cancer are the low effectiveness of low LET and inevitable normal tissue damage. Boron Neutron Capture Therapy (BNCT) is a form of potent radiation therapy using Boron-10 having a high propensityof capturing theraml neutrons from nuclear reactor and reacting with a prompt nuclear reaction. Photodynamic therapy is a similiar treatment of modality to BNCT using tumor-seeking photosenistizer and LASER beam. If Boron-10 and photosensitizers are introduced selectively into tumor cells, it is theoretically possible to destroy the tumor and to spare the surrounding normal tissue. Therefore, BNCT and PDT will be new potent treatment modalities in the next century. In this project, we performed PDT in the patients with bladder cancers, oropharyngeal cancer, and skin cancers. Also we developed I-BPA, new porphyrin compounds, methods for estimation of radiobiological effect of neutron beam, and superficial animal brain tumor model. Furthermore, we prepared preclinical procedures for clinical application of BNCT, such as the macro- and microscopic dosimetry, obtaining thermal neutron flux from device used for fast neutron production in KCCH have been performed

  2. Development of local radiation therapy

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seung Hoon; Lim, Sang Moo; Choi, Chang Woon; Chai, Jong Su; Kim, Eun Hee; Kim, Mi Sook; Yoo, Seong Yul; Cho, Chul Koo; Lee, Yong Sik; Lee, Hyun Moo

    1999-04-01

    The major limitations of radiation therapy for cancer are the low effectiveness of low LET and inevitable normal tissue damage. Boron Neutron Capture Therapy (BNCT) is a form of potent radiation therapy using Boron-10 having a high propensityof capturing theraml neutrons from nuclear reactor and reacting with a prompt nuclear reaction. Photodynamic therapy is a similiar treatment of modality to BNCT using tumor-seeking photosenistizer and LASER beam. If Boron-10 and photosensitizers are introduced selectively into tumor cells, it is theoretically possible to destroy the tumor and to spare the surrounding normal tissue. Therefore, BNCT and PDT will be new potent treatment modalities in the next century. In this project, we performed PDT in the patients with bladder cancers, oropharyngeal cancer, and skin cancers. Also we developed I-BPA, new porphyrin compounds, methods for estimation of radiobiological effect of neutron beam, and superficial animal brain tumor model. Furthermore, we prepared preclinical procedures for clinical application of BNCT, such as the macro- and microscopic dosimetry, obtaining thermal neutron flux from device used for fast neutron production in KCCH have been performed.

  3. Qualification and characterization of electronics of the fast neutron Hodoscope detectors using neutrons from CABRI core

    Science.gov (United States)

    Mirotta, S.; Guillot, J.; Chevalier, V.; Biard, B.

    2018-01-01

    The study of Reactivity Initiated Accidents (RIA) is important to determine up to which limits nuclear fuels can withstand such accidents without clad failure. The CABRI International Program (CIP), conducted by IRSN under an OECD/NEA agreement, has been launched to perform representative RIA Integral Effect Tests (IET) on real irradiated fuel rods in prototypical Pressurized Water Reactors (PWR) conditions. For this purpose, the CABRI experimental pulse reactor, operated by CEA in Cadarache, France, has been strongly renovated, and equipped with a pressurized water loop. The behavior of the test rod, located in that loop in the center of the driver core, is followed in real time during the power transients thanks to the hodoscope, a unique online fuel motion monitoring system, and one of the major distinctive features of CABRI. The hodoscope measures the fast neutrons emitted by the tested rod during the power pulse with a complete set of 153 Fission Chambers and 153 Proton Recoil Counters. During the CABRI facility renovation, the electronic chain of these detectors has been upgraded. In this paper, the performance of the new system is presented describing gain calibration methodology in order to get maximal Signal/Noise ratio for amplification modules, threshold tuning methodology for the discrimination modules (old and new ones), and linear detectors response limit versus different reactor powers for the whole electronic chain.

  4. Development situation of radiation curing materials

    International Nuclear Information System (INIS)

    He Songhua; Luo Junyi; Liu Zhen

    2010-01-01

    Due to fitting the '4E' principle, radiation curing technology, known as green technology, have shown its own superiority in many applications. It has been rapid developed in China and abroad in recent years, especially ultraviolet/electron beam (UV/EB) radiation curing technology. In order to let the researchers have a general understanding on the radiation curing materials and their development, in this paper a briefly introducing on the related radiation sources, chemical systems, curing mechanism, and the application, the common and difference of ultraviolet curing and electron beam curing has been made. A brief account of development of radiation-curable material in China and the outlook of the development of materials can be found in this paper. At last, we have proposed that the development of radiation curing technology will promote the development of the radiation curing material and benefit in the humanity. (authors)

  5. Parametric Cherenkov radiation (development of idea)

    International Nuclear Information System (INIS)

    Buts, V.A.

    2004-01-01

    Some physical results of researches about charged particles radiation in mediums with a periodic heterogeneity and in periodic potential are reported. The development of ideas Parametric Cherenkov Radiation has shown, that in mediums, which have even a weak degree of a periodic heterogeneity of an permittivity or potential, the nonrelativistic oscillators can radiated as relativistic. They effectively radiate the high numbers of harmonics. In particular, in the carried out experiments the ultra-violet radiation was excited at action on a crystal of intensive ten-centimetric radiation. These results give the reasons to hope for making of nonrelativistic lasers on free electrons

  6. Development of web monitoring radiation area monitor

    International Nuclear Information System (INIS)

    Jung, Hoon Jin; Lee, Jun Hee; Namkoong, Phil; Lee, Dong Hoon; Lee, Su Hong; Lee, Gun Bae

    2005-01-01

    Recently the increasing number of radioisotope industry and nuclear facility have ever raised the possibility of radiation safety accident. As such a result, radioisotope companies and nuclear facility operators have become to be much interested in radiation area monitoring for efficient radiation protection. At present, almost of the radiation area monitors which are imported products are outdated in aspect of their functions. Diversification of the monitoring work is urgently demanding additional functions to be added. Thus we have developed new-type digital area monitor which enables remote web monitoring with image and radiation dose rate value at distant places through using internet, the latest IT technology, and radiation measurement technology

  7. The development of radiation protection

    International Nuclear Information System (INIS)

    Pochin, E.E.

    1981-01-01

    The harm that might be caused by radiation exposure was recognised within months of Rontgen's discovery of X-rays, and recommendations for protection of patients and workers with radiation were formulated first in 1928. In the light of increasing radiobiological, genetic and human epidemiological evidence, it became clear that there might be no threshold, below which harmful effects did not occur. Recommendation and practice in radiation protection reflected this opinion from the early 1950's, and emphasised the consequent need for minimising exposures, quantifying risks and revising the dose limits appropriate for internal radiation of body organs. (author)

  8. Materials for federal radiation diagnosis development programme

    International Nuclear Information System (INIS)

    .

    1995-01-01

    The program of radiation diagnosis development envisages solution of four fundamental tasks: creation of organizational structure for interaction of all diagnostic means; formation of rational diagnostic algorithms, based on application of optimal combination of radiation diagnostics methods; provision of radiation diagnostic institutions with complex of introscopy means; reform of post graduate education. 2 tabs

  9. The development of radiation protection in Hungary

    International Nuclear Information System (INIS)

    Bisztray-Balku, S.; Bozoky, L.; Koblinger, L.

    1982-01-01

    This book contains the short history, development and present status of radiation protection and health physics in Hungary. The first chapter discusses the radiation protection standards and practices used in scientific, technical and medical radiology in this country, with their development history. The next chapter is devoted to the radiation protection techniques applied for medical uses of radioisotopes and accelerators including the organizational and management problems. The last chapter presents a review on radiation protection and health physics aspects of the Hungarian industry and agriculture, on radiation protection research and management, on instruments and dosimeters. A national bibliography on the subject up to 1979 is included. (Sz.J.)

  10. Advanced Space Radiation Detector Technology Development

    Science.gov (United States)

    Wrbanek, John D.; Wrbanek, Susan Y.; Fralick, Gustave C.

    2013-01-01

    The advanced space radiation detector development team at the NASA Glenn Research Center (GRC) has the goal of developing unique, more compact radiation detectors that provide improved real-time data on space radiation. The team has performed studies of different detector designs using a variety of combinations of solid-state detectors, which allow higher sensitivity to radiation in a smaller package and operate at lower voltage than traditional detectors. Integration of multiple solid-state detectors will result in an improved detector system in comparison to existing state-of-the-art instruments for the detection and monitoring of the space radiation field for deep space and aerospace applications.

  11. Development of radiation dose assessment system for radiation accident (RADARAC)

    International Nuclear Information System (INIS)

    Takahashi, Fumiaki; Shigemori, Yuji; Seki, Akiyuki

    2009-07-01

    The possibility of radiation accident is very rare, but cannot be regarded as zero. Medical treatments are quite essential for a heavily exposed person in an occurrence of a radiation accident. Radiation dose distribution in a human body is useful information to carry out effectively the medical treatments. A radiation transport calculation utilizing the Monte Carlo method has an advantageous in the analysis of radiation dose inside of the body, which cannot be measured. An input file, which describes models for the accident condition and quantities of interest, should be prepared to execute the radiation transport calculation. Since the accident situation, however, cannot be prospected, many complicated procedures are needed to make effectively the input file soon after the occurrence of the accident. In addition, the calculated doses are to be given in output files, which usually include much information concerning the radiation transport calculation. Thus, Radiation Dose Assessment system for Radiation Accident (RADARAC) was developed to derive effectively radiation dose by using the MCNPX or MCNP code. RADARAC mainly consists of two parts. One part is RADARAC - INPUT, which involves three programs. A user can interactively set up necessary resources to make input files for the codes, with graphical user interfaces in a personnel computer. The input file includes information concerning the geometric structure of the radiation source and the exposed person, emission of radiations during the accident, physical quantities of interest and so on. The other part is RADARAC - DOSE, which has one program. The results of radiation doses can be effectively indicated with numerical tables, graphs and color figures visibly depicting dose distribution by using this program. These results are obtained from the outputs of the radiation transport calculations. It is confirmed that the system can effectively make input files with a few thousand lines and indicate more than 20

  12. An outlook to radiation protection development

    International Nuclear Information System (INIS)

    Martincic, R.; Strohal, P.

    1996-01-01

    Radiation protection and safety have developed over many decades as the effects of ionizing radiation have been better and better understood. Some events in the last decade had essential impact on radiation protection policy/philosophy and related safety standards. Among them are available data of some long term radio-epidemiological studies of populations exposed to radiation. Investigations of the survivors of the atomic bombing of Hiroshima and Nagasaki illustrated that exposure to radiation has also a potential for the delayed induction of malignancies. They also showed that irradiation of pregnant women may result with certain mental damage in foetus. Several big radiation accidents which appeared in the last decade also had an impact on developments in radiation protection philosophy and practices. A well known Chernobyl accident showed that limited knowledge was available at the time of the accident on transfer of radionuclides in a specific environment, radioecological effects and pathways of highly radioactive atmospheric precipitation generated during the accident on various components of the environment. New scientific data indicated also that in some parts of human environment there are measurable effects of chronic exposure resulting from natural radiation. UNSCEAR is periodically publishing the most valuable set of data as compilation, and disseminates information on the health effects of radiation and on levels of radiation exposure due to different sources. These data are also the best guidelines for the necessary improvements and updating of radiation protection practices and philosophies. The latest ICRP-60 publication and recently issued International Basic Safety Standards for Protection Against Ionizing Radiation and for the Safety of Radiation Sources are reflecting many of the above mentioned findings. On the other hand the use of radiation sources is increasing day by day, and many new facilities applying radiation in radiotherapy

  13. Developing a Radiation Protection Hub

    Energy Technology Data Exchange (ETDEWEB)

    Hertel, Nolan E [ORNL

    2017-01-01

    The WARP report issued by the NCRP study committee estimates that in ten years there will be a human capital crisis across the radiation safety community. The ability to respond to this shortage will be amplified by the fact that many radiation protection (health physics) academic programs will find it difficult to justify their continued existence since they are low volume programs, both in terms of enrollment and research funding, compared to the research funding return and visibility of more highly subscribed and highly funded academic disciplines. In addition, across the national laboratory complex, radiation protection research groups have been disbanded or dramatically reduced in size. The loss of both of these national resources is being accelerated by low and uncertain government funding priorities. The most effective solution to this problem would be to form a consortium that would bring together the radiation protection research, academic and training communities. The goal of such a consortium would be to engage in research, education and training of the next generation of radiation protection professionals. Furthermore the consortium could bring together the strengths of different universities, national laboratory programs and other entities in a strategic manner to accomplish a multifaceted research, educational and training agenda. This vision would forge a working and funded relationship between major research universities, national labs, four-year degree institutes, technical colleges and other partners.

  14. New trends and developments in radiation chemistry

    International Nuclear Information System (INIS)

    1989-10-01

    Radiation chemistry is a branch of chemistry that studies chemical transformations in materials exposed to high-energy radiations. It uses radiation as the initiator of chemical reactions. Practical applications of radiation chemistry today extend to many fields, including health care, food and agriculture, manufacturing, industrial pollution abatement, biotechnology and telecommunications. The important advantage of radiation chemistry lies in its ability to be used to produce, and study, almost any reactive atomic and molecular species playing a part in chemical reactions, synthesis, industrial processes, or in biological systems. The techniques are applicable to gaseous, liquid, solid, and heterogeneous systems. By combining different techniques of radiation chemistry with analytical chemistry, the reaction mechanism and kinetics of chemical reactions are studied. In November 1988 in Bologna, Italy, the IAEA convened an advisory group meeting to assess new trends and developments in radiation chemistry. The present publication includes most of the contributions presented at the meeting. Refs, figs and tabs

  15. Current developments in radiation chemistry

    International Nuclear Information System (INIS)

    Cooper, R.

    2000-01-01

    Full text: The theme of the 2000 Gordon Conference on Radiation Chemistry was 'diversity'. The range of topics covered was heralded by the opening presentations which went from the galactic to molecular biology, radiation chemistry and non thermal surface processes in the outer solar system to achievements and open challenges in DNA research. The rest of the conference reflected the extended usage of radiation chemistry -its processes and techniques - applied to a panorama of topics. The ability to generate either oxidising or reducing free radicals in known quantities has been the foundation stone on which all applications are based. In particular it is noticeable that biological systems have been attempted by an increasing number of workers, such as studies of biological ageing and also reactions of nitric oxide in biological environments. Electron transfer processes in proteins are straightforward applications of solvated electron chemistry even if the results are not straightforward in their interpretation. Other topics presented include, radiation chemical processes induced in: supercritical CO 2 , treatment of contaminated materials, 3-dimensional Fullerenes, zeolites and radiation catalysis. In material science, aspects of ions and excited states in polymers, conducting polymers, donor acceptor processes in photo curing, enhancement of photo-electron yields in doped silver halides- improvement of the photographic process, radiation chemistry in cages and bubbles are discussed. The fundamental aspects of radiation chemistry are not yet all worked out. Subpicosecond pulsed electron beam sources, some of them 'tabletop', are still being planned to probe the early events in radiation chemistry both in water and in organic solvents. There is still an interest in the chemistry produced by pre-solvated electrons and the processes induced by heavy ion radiolysis. The description of the relaxation of an irradiated system which contains uneven distributions of ions

  16. Development of new organic materials by radiation

    International Nuclear Information System (INIS)

    Nho, Young Chang; Kang, Phil Hyun; Choi, Jae Hak

    2010-04-01

    The aims of this project is to develop the high-performance industrial and biomedical new materials and finally contribute to the advancement of the national radiation technology industry. In the 1st project, we carried out the radiation-based new research to apply long-term moisturizing effects and effective natural herbal extracts on the atopic wounds using gamma-ray irradiation. Also, we have developed the separator and the polymer gel electrolyte for lithium secondary battery by radiation. In the 2nd project, we have developed the advanced composite materials such as silicon carbide fibers, carbon fiber reinforced plastics, low dielectric materials for semiconductor and adhesive technology for TFT-LCD panel by radiation. In the 3rd project, we have developed the various radiation-based techniques for the surface modification of polymers and ceramics, biomolecules immobilization and patterning, prevention of biomolecule's non-specific adhesion, and surface modification of carbon nanotubes

  17. Radiation safety assessment and development of environmental radiation monitoring technology

    CERN Document Server

    Choi, B H; Kim, S G

    2002-01-01

    The Periodic Safety Review(PSR) of the existing nuclear power plants is required every ten years according to the recently revised atomic energy acts. The PSR of Kori unit 1 and Wolsong unit 1 that have been operating more than ten years is ongoing to comply the regulations. This research project started to develop the techniques necessary for the PSR. The project developed the following four techniques at the first stage for the environmental assessment of the existing plants. 1) Establishment of the assessment technology for contamination and accumulation trends of radionuclides, 2) alarm point setting of environmental radiation monitoring system, 3) Development of Radiation Safety Evaluation Factor for Korean NPP, and 4) the evaluation of radiation monitoring system performance and set-up of alarm/warn set point. A dynamic compartment model to derive a relationship between the release rates of gas phase radionuclides and the concentrations in the environmental samples. The model was validated by comparing ...

  18. Development of environmental radiation control technology

    International Nuclear Information System (INIS)

    Han, M. H.; Kim, E. H.; Keum, D. K.; Kang, M. J.; Jang, B. W.

    2010-04-01

    The objectives of the study are to development of an urban atmospheric dispersion model and data assimilation technique for improving the reliability, to develop the technology for assessing the radiation impact to biota and the surface water transport model, to develop the analytical techniques for the indicator radionuclides on decommissioning of nuclear facilities and nuclear waste disposal sites and to assess of the national environmental radiation impact and establish the optimum management bases of natural radiation. The obtained results might be used; for assessing the radiological effects due to and radiological incident in an urban area, for assessing radiation doses on biota for the environmental protection from ionizing radiation with the application of new concept of the ICP new recommendation, for analyzing the indicator radionuclides on decommissioning of nuclear facilities and nuclear waste disposal sites, and for providing the natural radionuclide database of Korea to international organizations such as UNSCEAR. It can be used for emphasizing relative nuclear safety

  19. Development of environment radiation database management system

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Jong Gyu; Chung, Chang Hwa; Ryu, Chan Ho; Lee, Jin Yeong; Kim, Dong Hui; Lee, Hun Sun [Daeduk College, Taejon (Korea, Republic of)

    1999-03-15

    In this development, we constructed a database for efficient data processing and operating of radiation-environment related data. Se developed the source documents retrieval system and the current status printing system that supports a radiation environment dta collection, pre-processing and analysis. And, we designed and implemented the user interfaces and DB access routines based on WWW service policies on KINS Intranet. It is expected that the developed system, which organizes the information related to environmental radiation data systematically can be utilize for the accurate interpretation, analysis and evaluation.

  20. Development of environment radiation database management system

    International Nuclear Information System (INIS)

    Kang, Jong Gyu; Chung, Chang Hwa; Ryu, Chan Ho; Lee, Jin Yeong; Kim, Dong Hui; Lee, Hun Sun

    1999-03-01

    In this development, we constructed a database for efficient data processing and operating of radiation-environment related data. Se developed the source documents retrieval system and the current status printing system that supports a radiation environment dta collection, pre-processing and analysis. And, we designed and implemented the user interfaces and DB access routines based on WWW service policies on KINS Intranet. It is expected that the developed system, which organizes the information related to environmental radiation data systematically can be utilize for the accurate interpretation, analysis and evaluation

  1. Development of new organic materials by radiation

    Energy Technology Data Exchange (ETDEWEB)

    Nho, Y. C.; Kang, P. H.; Choi, J. H.; and others

    2012-01-15

    The aims of this project is to develop the high-performance industrial and biomedical new materials and finally contribute to the advancement of the national radiation technology industry. In the 1st project, we have developed the radiation-based new therapeutic agents such as hydrogel patch, paste, naganol, nanoparticles and nano fibers containing natural medicinal materials for the treatment of atomic dermatitis and diabetic ulcer. Also, we have developed the separator, the polymer gel electrolyte, and proton exchange membranes for lithium secondary battery and fuel cell by radiation. In the 2nd project, we have developed the advanced composite materials such as silicon carbide fibers, carbon fiber reinforced plastics, low dielectric materials for semiconductor and adhesive technology. In the 3rd project, the crucial radiation-induced surface modification technologies for the fabrication of the advanced biosensors/chips and electronic devices have been successfully developed.

  2. Development of new organic materials by radiation

    International Nuclear Information System (INIS)

    Nho, Y. C.; Kang, P. H.; Choi, J. H.

    2012-01-01

    The aims of this project is to develop the high-performance industrial and biomedical new materials and finally contribute to the advancement of the national radiation technology industry. In the 1st project, we have developed the radiation-based new therapeutic agents such as hydrogel patch, paste, naganol, nanoparticles and nano fibers containing natural medicinal materials for the treatment of atomic dermatitis and diabetic ulcer. Also, we have developed the separator, the polymer gel electrolyte, and proton exchange membranes for lithium secondary battery and fuel cell by radiation. In the 2nd project, we have developed the advanced composite materials such as silicon carbide fibers, carbon fiber reinforced plastics, low dielectric materials for semiconductor and adhesive technology. In the 3rd project, the crucial radiation-induced surface modification technologies for the fabrication of the advanced biosensors/chips and electronic devices have been successfully developed

  3. Developing aspects of radiation oncology

    International Nuclear Information System (INIS)

    Fowler, J.F.

    1981-01-01

    Both physics and radiobiology provide growing points in modern radiotherapy. Better physical dose distributions appear to be still worth achieving and can be obtained from beams of protons, heavy ions, or negative pi mesons because a peak region of high dose is deposited at depth in tissue. The heavier ion and pions also have biological properties of high LET radiation which could be important: the radioresistance of hypoxic cells in tumors is less, and tissues which are proliferating fast may be relatively more vulnerable. Although fast neutrons provide ordinary physical dose distributions, their high LET properties are similar to those of ions as heavy as neon. Drugs which specifically radiosensitize hypoxic cells offer a way of determining with certainty how important hypoxic cells are in radiotherapy. Hyperthermia is in its early stages but promises to damage just those cells poor in nutrients which are relatively resistant to ionizing radiation. Radioprotecting drugs, which depend upon poor uptake in tumors but high uptake in normal tissues, are also being tested

  4. Ionising radiation and the developing human brain

    International Nuclear Information System (INIS)

    Schull, W.J.

    1991-01-01

    This article reviews the effects of radiation exposure of the developing human brain. Much of the evidence has come from the prenatally exposed in Hiroshima and Nagasaki. The effects on development age, mental retardation, head size, neuromuscular performance, intelligence tests, school performance and the occurrence of convulsions are discussed. Other topics covered include the biological nature of the damage to the brain, risk estimates in human and problems in radiation protection. (UK)

  5. Roles of radiation chemistry in development and research of radiation biology

    International Nuclear Information System (INIS)

    Min Rui

    2009-01-01

    Radiation chemistry acts as a bridge connecting radiation physics with radiation biology in spatial and temporal insight. The theory, model, and methodology coming from radiation chemistry play an important role in the research and development of radiation biology. The chemical changes induced by ionizing radiation are involved not only in early event of biological effects caused by ionizing radiation but in function radiation biology, such as DNA damage and repair, sensitive modification, metabolism and function of active oxygen and so on. Following the research development of radiation biology, systems radiation biology, accurate quality and quantity of radiation biology effects need more methods and perfect tools from radiation chemistry. (authors)

  6. Development of radiation hard scintillators

    International Nuclear Information System (INIS)

    Markley, F.; Woods, D.; Pla-Dalmau, A.; Foster, G.; Blackburn, R.

    1992-05-01

    Substantial improvements have been made in the radiation hardness of plastic scintillators. Cylinders of scintillating materials 2.2 cm in diameter and 1 cm thick have been exposed to 10 Mrads of gamma rays at a dose rate of 1 Mrad/h in a nitrogen atmosphere. One of the formulations tested showed an immediate decrease in pulse height of only 4% and has remained stable for 12 days while annealing in air. By comparison a commercial PVT scintillator showed an immediate decrease of 58% and after 43 days of annealing in air it improved to a 14% loss. The formulated sample consisted of 70 parts by weight of Dow polystyrene, 30 pbw of pentaphenyltrimethyltrisiloxane (Dow Corning DC 705 oil), 2 pbw of p-terphenyl, 0.2 pbw of tetraphenylbutadiene, and 0.5 pbw of UVASIL299LM from Ferro

  7. Development of radiation resistant PEEK insulation cable

    International Nuclear Information System (INIS)

    Mio, Keigo; Ogiwara, Norio; Hikichi, Yusuke; Furukori, Hisayoshi; Arai, Hideyuki; Nishizawa, Daiji; Nishidono, Toshiro

    2009-04-01

    Material characterization and development has been carried out for cable insulation suitable for use in the J-PARC 3-GeV RCS radiation environment. In spite of its high cost, PEEK (polyether-ether-ketone) has emerged as the leading candidate satisfying requirements of being non-halogen based, highly incombustible and with radiation resistant at least 10 MGy, along with the usual mechanical characteristics such as good elongation at break, which are needed in a cable insulation. Gamma-ray irradiation tests have been done in order to study radiation resistance of PEEK cable. Further, mechanical, electrical and fire retardant characteristics of a complete cable such as would be used at the J-PARC RCS were investigated. As a result, PEEK cables were shown to be not degraded by radiation up to at least 10 MGy, and thus could be expected to operate stably under the 3-GeV RCS radiation environment. (author)

  8. Development of radiation protection and measurement technology

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Si Young; Lee, T. Y.; Kim, J. L.; Kim, B. H.; Lee, B. J.; Chung, K. K.; Lee, K. C.; Chung, R. I.; Han, Y. D.; Kim, J. S.; Lee, H. S.; Kim, C. K.; Yoon, K. S.; Jeong, D. Y.; Yoon, S. C.; Yoon, Y. C.; Lee, S. Y.; Kim, J. S.; Seo, K. W. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Kim, J. K.; Lee, J. K. [Hanyang Univ., Seoul (Korea, Republic of)

    1997-07-01

    Reference X-, gamma, beta and neutron radiation fields complying with the ISO and ANSI standards have been established and evaluated to provide a basic technical support in national radiation protection dosimetry program and to provide calibration measurement devices. Personal dose evaluation algorithm has been developed with these reference radiation fields, which comply well with both domestic and the new ANSI N13.11, to evaluate accurate personal dose equivalents. A personal internal dosimetry algorithm which can estimate the intakes of radionuclides from the results of in vivo bioassay and the resulting internal doses has been developed and verified its performance. It was also evaluated to be equality excellent compared with those being used in foreign countries and used to make a computer code for internal dose evaluation which can be run with PC under the Windows environment. A BOMAB phantom for precise calibration of in vivo system has been also designed, fabricated and test-evaluated. Based on the ALARA concept of the optimization principle of radiation protection, a method for estimating the cost for radiation protection has been studied and an objective monetary cost of detriment due to radiation exposure, called {alpha} value ($/man-Sv) has been derived and proposed based on the Korean socio-economic situation and human risk factors to provide basic data for the radiation protection optimization study in Korea. (author). 100 refs., 104 tabs., 69 figs.

  9. Advances in Therapeutic Development for Radiation Cystitis.

    Science.gov (United States)

    Rajaganapathy, Bharathi Raja; Jayabalan, Nirmal; Tyagi, Pradeep; Kaufman, Jonathan; Chancellor, Michael B

    2014-01-01

    Radiation treatment for pelvic malignancies is typically associated with radiation injury to urinary bladder that can ultimately lead to radiation cystitis (RC). The late sequelae of radiation therapy may take many years to develop and include bothersome storage symptoms such as hematuria, which may be life-threatening in severe cases of hemorrhagic cystitis. Although no definitive treatment is currently available, various interventions are used for radiation and hemorrhagic cystitis including blood transfusion, bladder irrigation, intravesical instillation of substances such as alum, silver nitrate, prostaglandins or formalin, and fulguration of intravesical bleeding sites and surgery options such as supravesical urinary diversions and cystectomy. Effects of non-surgical treatments for radiation and hemorrhagic cystitis are of modest success and studies are lacking to control the effects caused by RC. When such measures have proven ineffective, use of bladder botulinum toxin injection has been reported. New therapy, such as intravesical immunosuppression with local tacrolimus formulation is being developed for the treatment of radiation hemorrhagic cystitis. © 2013 Wiley Publishing Asia Pty Ltd.

  10. A high-resolution tracking hodoscope based on capillary layers filled with liquid scintillator

    CERN Document Server

    Bay, A; Bruski, N; Buontempo, S; Currat, C; D'Ambrosio, N; Ekimov, A V; Ereditato, A; Fabre, Jean-Paul; Fanti, V; Frekers, D; Frenkel, A; Golovkin, S V; Govorun, V N; Harrison, K; Koppenburg, P; Kozarenko, E N; Kreslo, I E; Liberti, B; Martellotti, G; Medvedkov, A M; Mondardini, M R; Penso, G; Siegmund, W P; Vasilchenko, V G; Vilain, P; Wilquet, G; Winter, Klaus; Wörtche, H J

    2001-01-01

    Results are given on tests of a high-resolution tracking hodoscope based on layers of \\hbox{26-$\\mu$m-bore} glass capillaries filled with organic liquid scintillator (1-methylnaphthalene doped with R39). The detector prototype consisted of three 2-mm-thick parallel layers, with surface areas of $2.1 \\times 21$~cm$^2$. The layers had a centre-to-centre spacing of 6~mm, and were read by an optoelectronic chain comprising two electrostatically focused image intensifiers and an Electron-Bombarded Charge-Coupled Device (EBCCD). Tracks of cosmic-ray particles were recorded and analysed. The observed hit density was 6.6~hits/mm for particles crossing the layers perpendicularly, at a distance of 1~cm from the capillaries' readout end, and 4.2~hits/mm for particles at a distance of 20~cm. A track segment reconstructed in a single layer had an rms residual of $\\sim$~20~$\\mu$m, and allowed determination of the track position in a neighbouring layer with a precision of $\\sim$~170~$\\mu$m. This latter value corresponded to...

  11. Development of Radiation Breeding Technology of Macroalgae

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jongil; Park, J. H.; Song, B. S.; Kim, J. K.; Kim, J. H.; Lee, H. J.; Yang, H. Y.

    2013-01-15

    Macroalgae has been utilized as food material from long time ago, and recently newly recognized as functional materials and the source of bio-fuel. But, the study on the macroalgae is just beginning and the study on radiation effect and radiation breeding technology was not reported. In this study, the effect of radiation on the macroalgae Porphyra was investigated for the development of new mutant strains. Prphyra was successively cultivated in the laboratory chamber with optimized growth condition. Also, the radiation sensitivity of Porphyra was determined. To develop the mutant strain, irradiated Porphyra strains were screened for better growth and higher resistance against oxidative stress. The selected Porphyra was further cultivated in ocean site. Also, several genes from mutant Porphyra was heterologous expressed and studied for its dunctionality. This results can provide mutation technology of macroalgae and further contribute in the activation of fishery industry and national health enhancement.

  12. Development of Radiation Breeding Technology of Macroalgae

    International Nuclear Information System (INIS)

    Choi, Jongil; Park, J. H.; Song, B. S.; Kim, J. K.; Kim, J. H.; Lee, H. J.; Yang, H. Y.

    2013-01-01

    Macroalgae has been utilized as food material from long time ago, and recently newly recognized as functional materials and the source of bio-fuel. But, the study on the macroalgae is just beginning and the study on radiation effect and radiation breeding technology was not reported. In this study, the effect of radiation on the macroalgae Porphyra was investigated for the development of new mutant strains. Prphyra was successively cultivated in the laboratory chamber with optimized growth condition. Also, the radiation sensitivity of Porphyra was determined. To develop the mutant strain, irradiated Porphyra strains were screened for better growth and higher resistance against oxidative stress. The selected Porphyra was further cultivated in ocean site. Also, several genes from mutant Porphyra was heterologous expressed and studied for its dunctionality. This results can provide mutation technology of macroalgae and further contribute in the activation of fishery industry and national health enhancement

  13. Radiation risks to the developing nervous system

    International Nuclear Information System (INIS)

    Kriegel, H.; Schmahl, W.; Stieve, F.E.; Gerber, G.B.

    1986-01-01

    A symposium dealing with 'Radiation Risks to the Developing Nervous System' held at Neuherberg, June 18-20, 1985 was organised by the Radiation Protection Programme of the Commission of the European Communities and the Gesellschaft fuer Strahlen- und Umweltforschung mbH. The proceedings of this symposium present up-to-date information on the development of the nervous system and the modifications caused by prenatal radiation there upon. A large part of the proceedings is devoted to the consequences of prenatal irradiation in experimental animals with respect to alterations in morphology, biochemistry and behaviour, to the influence of dose, dose rate and radiation quality and to the question whether damage of the brain can arise from a synergistic action of radiation together with other agents. Since animal models for damage to the human central nervous system have inherent short-comings due to the differences in structure, complexity and development it is discussed how experimental studies could be applied to the human situation. The most recent data on persons exposed in utero at Hiroshima and Nagasaki are reviewed. A round table discussion, published in full, analyses all this information with a view to radiation protection, and defines the areas where future studies are needed. Separate abstracts were prepared for papers in these proceedings. (orig./MG)

  14. Technology development for radiation shielding analysis

    International Nuclear Information System (INIS)

    Ha, Jung Woo; Lee, Jae Kee; Kim, Jong Kyung

    1986-12-01

    Radiation shielding analysis in nuclear engineering fields is an important technology which is needed for the calculation of reactor shielding as well as radiation related safety problems in nuclear facilities. Moreover, the design technology required in high level radioactive waste management and disposal facilities is faced on serious problems with rapidly glowing nuclear industry development, and more advanced technology has to be developed for tomorrow. The main purpose of this study is therefore to build up the self supporting ability of technology development for the radiation shielding analysis in order to achieve successive development of nuclear industry. It is concluded that basic shielding calculations are possible to handle and analyze by using our current technology, but more advanced technology is still needed and has to be learned for the degree of accuracy in two-dimensional shielding calculation. (Author)

  15. Recent developments in radiation detectors and instruments

    International Nuclear Information System (INIS)

    Das, Debashis

    2016-01-01

    Radiation detector is the key component in precise and accurate measurement of the nuclear radiations. The detectors deployed for radiation measurements in broadly classified sectors of Energy, Security, Discovery Science and Health and Environments are in general specific to their applications. The nuclear reactors as well as the fuel processing including waste management in energy sector require wide range/variety of detectors and the instruments for safe and precise generation of power. The security sector has gained importance in radiation monitoring in the present security perspective and there are many challenges in development of detector technology. The Discovery Science or the mega science projects viz CERN, Fermilab, GANIL, INO, MACE telescope, ITER etc have continuously generated new demand on detector related technologies that have been also found to be useful in other applications. Similarly, the health and environment monitoring have been also evolving with new technologies and techniques to address the requirement's arising in projects of new nuclear programs

  16. Sustainable development and justification in radiation protection

    International Nuclear Information System (INIS)

    De Jager, D.; Blok, K.

    1992-04-01

    The advantages and disadvantages of ionizing radiation must be listed in order to be able to justify the application of this technique, based on criteria by which ionizing radiation can be assessed. In this note the development of so-called sustainability criteria, by which environmental protection aspects can be assessed, is initiated. The sustainability criteria must include the subjects integrated chain management, energy extending, quality improvement and the perception of risks, as indicated in the memo Handling of Radiation Risks. The sustainability criteria can be applied absolute (testing of the marginal values), as well as relative (choice for the least hazardous effect). An overall outline is given of the impact of applying these criteria. The most discriminative criterion appears to be the waste criterion. Generally spoken, only ionizing radiation of instruments and applications of some short-living isotopes, produced by means of accelerators, can meet this criterion. 4 figs., 2 tabs., 1 appendix, 17 refs

  17. Development of leak detector by radiation. 2

    International Nuclear Information System (INIS)

    Suzuki, Takashi; Okano, Yasuhiro; Chisaka, Haruo

    1997-01-01

    Leak detector by radiation has been developed by cooperative research between Water Authority and us. In his fiscal year, the most suitable arrangement of detector system was simulated by Monte Carlo method. The first, the experimental values were compared with the results of simulation. The second, calculation was carried out by changing the quality of reflective materials and distance between radiation source and detector. The simulation results were agreed with the experimental results. On the basis of the rate of presence of leak, the most suitable arrangement of detector system was obtained under the conditions that both radiation source and detector covered with graphite or iron of 5 cm thickness and separated each other 3 cm apart. However, by comparing FOM (figure of merit), the suitable arrangement was that radiation source and detector adjoined each other and covered by graphite or iron of 20 cm thickness. (S.Y.)

  18. Studies and Development of Radiation Processed Nanomaterials

    Energy Technology Data Exchange (ETDEWEB)

    Varshney, Lalit; Sabharwal, Sunil; Francis, Sanju; Biswal, Jayashree [Radiation Technology Development Section, Bhabha Atomic Research Centre, Mumbai (India)

    2009-07-01

    Nanotechnology is the emerging technology that deals with processing, manipulating and manufacturing devices and products at the microscopic scale of molecules or atoms with structures smaller than 100 nanometers. Realizing its potential, Government of India spending on R&D in nanotechnology has gone up by an order of magnitude in last 5 years through various national and international programs. High energy gamma radiation and electron beams could be a useful tool to create innovative and newer nano-materials for various applications in medical field for treatment and detection purposes. Considering its certain advantage for producing nano-materials, radiation technology will play a crucial role in development of such materials. Research and development in the area of nano--particles on polymer films, hydrogels, silica particles and their nano-clusters using radiation technology could be a possible route for development of new functional nano-materials. (author)

  19. Development of Radiation Technique for Environmental Treatment

    International Nuclear Information System (INIS)

    Lee, Myun Joo; Kuk, Il Hiun; Jin, Joon Ha

    2007-02-01

    The purpose of this research is to development of technologies for 1) the removal of toxic organic chemicals in sewage sludges and the volume reduction of the sewage sludge 2) the recycling/reuse of sewage sludge 3) the reconvey of resource from fishery waste by using radiation technologies. This research project focused on the study of treatment, disposal, and recycling/reuse of sewage sludge by radiation technology, and recovery of highly value-added resources from the wastes. As basic studies with a radiation technology, an enhancement of dewaterbilities of sewage sludge, development of dewatering conditioner, reduction of trace toxic organic chemicals, and the toxicities of the byproducts were studied. Based on the basic experimental results, we developed the pilot-scale system with the continuous e-beam and dewatering unit and the advanced treatment system with the use of carbon source recovered from sewage sludge

  20. Development of Radiation Technique for Environmental Treatment

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Myun Joo; Kuk, Il Hiun; Jin, Joon Ha [and others

    2007-02-15

    The purpose of this research is to development of technologies for 1) the removal of toxic organic chemicals in sewage sludges and the volume reduction of the sewage sludge 2) the recycling/reuse of sewage sludge 3) the reconvey of resource from fishery waste by using radiation technologies. This research project focused on the study of treatment, disposal, and recycling/reuse of sewage sludge by radiation technology, and recovery of highly value-added resources from the wastes. As basic studies with a radiation technology, an enhancement of dewaterbilities of sewage sludge, development of dewatering conditioner, reduction of trace toxic organic chemicals, and the toxicities of the byproducts were studied. Based on the basic experimental results, we developed the pilot-scale system with the continuous e-beam and dewatering unit and the advanced treatment system with the use of carbon source recovered from sewage sludge.

  1. Application of radiation technology in vaccines development.

    Science.gov (United States)

    Seo, Ho Seong

    2015-07-01

    One of the earliest methods used in the manufacture of stable and safe vaccines is the use of chemical and physical treatments to produce inactivated forms of pathogens. Although these types of vaccines have been successful in eliciting specific humoral immune responses to pathogen-associated immunogens, there is a large demand for the development of fast, safe, and effective vaccine manufacturing strategies. Radiation sterilization has been used to develop a variety of vaccine types, because it can eradicate chemical contaminants and penetrate pathogens to destroy nucleic acids without damaging the pathogen surface antigens. Nevertheless, irradiated vaccines have not widely been used at an industrial level because of difficulties obtaining the necessary equipment. Recent successful clinical trials of irradiated vaccines against pathogens and tumors have led to a reevaluation of radiation technology as an alternative method to produce vaccines. In the present article, we review the challenges associated with creating irradiated vaccines and discuss potential strategies for developing vaccines using radiation technology.

  2. Studies and Development of Radiation Processed Nanomaterials

    International Nuclear Information System (INIS)

    Varshney, Lalit; Sabharwal, Sunil; Francis, Sanju; Biswal, Jayashree

    2009-01-01

    Nanotechnology is the emerging technology that deals with processing, manipulating and manufacturing devices and products at the microscopic scale of molecules or atoms with structures smaller than 100 nanometers. Realizing its potential, Government of India spending on R&D in nanotechnology has gone up by an order of magnitude in last 5 years through various national and international programs. High energy gamma radiation and electron beams could be a useful tool to create innovative and newer nano-materials for various applications in medical field for treatment and detection purposes. Considering its certain advantage for producing nano-materials, radiation technology will play a crucial role in development of such materials. Research and development in the area of nano--particles on polymer films, hydrogels, silica particles and their nano-clusters using radiation technology could be a possible route for development of new functional nano-materials. (author)

  3. Radiation protection monitoring in tropical, developing countries

    International Nuclear Information System (INIS)

    Becker, K.; Drexler, G.

    1979-01-01

    Almost all radiation protection standards, manuals and textbooks have been written in and for industrialized countries in temperate climates, and most research effort and instrument manufacturers are also located there. There has been relatively little interest in the completely different socio-economic and climatic conditions in many developing countries. Some of the important differences in conditions, such as high temperatures and relative humidities, electric-power failures and voltage fluctuations, shortage of trained manpower, etc., are discussed, and suggestions are made how to minimize their impacts. Other important matters that are considered are recruitment and training, optimized organizational structures, and the proper choice of research topics in the radiation protection field. (author)

  4. Development of biodegradable fungicide by radiation

    International Nuclear Information System (INIS)

    Lee, Young Jeun; Kim, Dong Sub

    2010-01-01

    To develop the fungicide which is biodegradable and alternative to chemical pesticide that has an side effect of environmental pollution, Mutant induction of the enhanced antifungal activity was studied by using radiation. Characteristics and structure of antifungal biomaterials derived from these mutants were analysed. Sixteen antifungal microbes were isolated and 4 antifungal activity enhanced mutants were induced by using radiation. P. lentimorbus WJ5a17 had 41% higher antifungal activity than the wild type. Two biomaterials related to the antifungal activity from the above mutant were isolated and purified

  5. Radiation dosimetry in nuclear medicine - recent developments

    International Nuclear Information System (INIS)

    Hetherington, E.L.R.; Wood, N.R.

    1976-01-01

    This paper reviews developments in radiation dosimetry in Nuclear Medicine over the past few years. The practical scope of the Medical Internal Radiation Dose (MIRD) Committee's Schema for dose determination has been extended by the development of more realistic mathematical models of the human body, together with the improvement in basic physical data used in dose calculations. Apart from the use of the Adult Human Phantom as the basis for dose determination, models have been developed for the estimation of doses to children and to the developing foetus. The Schema has been extended to permit calculations of the dose to dynamic organs, particularly the bladder. The principle of Monte Carlo photon history simulation, which forms the basis of much of the MIRD Schema's published data, has been used at the Australian Atomic Energy Commission for the determination of complete photon dose distributions. These are more meaningful in many cases than the average doses determined by the absorbed fraction method. (author)

  6. Development of delayed radiation necrosis. Case report

    Energy Technology Data Exchange (ETDEWEB)

    Ohara, ShigFeki; Takagi, Terumasa [Meitetsu Hospital, Nagoya (Japan); Shibata, Taichiro; Nagai, Hajime

    1983-04-01

    The authors discussed the developing process of delayed radiation necrosis of the brain from the case of a 42-year-old female who developed intracranial hypertension and left hemiparesis 5 and a half years after radiotherapy for pituitary adenoma. The initial sign of radiation necrosis was from a CT scan taken 3 and a half years after radiotherapy showing an irregular low density lesion in the right temporal lobe. CT scan 2 years later demonstrated displacement of the midline structures to the left and a larger low density lesion with partially high density in the right MCA territory that was enhanced with intravenous contrast medium. Recovery after a right temporal lobectomy and administration of steroid hormone were uneventful. Eight months later there were no signs of raised intracranial pressure nor of neurological deficits. Tissues obtained from the right temporal lobe at lobectomy revealed the characteristic changes of delayed radiation necrosis; a mixture of fresh, recent, and old vascular lesions in the same specimen. From these findings, it was speculated that delayed radiation necrosis might initially occur within several years after radiotherapy and might gradually take a progressive and extended course, even in cases whose clinical symptoms develop much later.

  7. Influence of radiation on the developing brain

    International Nuclear Information System (INIS)

    Gao Weimin; Zhou Xiangyan

    1997-01-01

    An outline of current status in study on the influence of radiation on the developing brain was given based on data from both human and animals. Analysis was made in 5 aspects, such as the behaviour of nervous, changes on cellular and molecular levels, apoptosis of cells, and the adaptive reaction, which could be helpful for further understanding the influences of prenatal exposure on the developing brain

  8. Development of clinical application of radiation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Mi Sook; Yoo, Seoung Yul; Yoo, Hyung Jun [and others

    2000-04-01

    The aim is to develop the clinical radiation therapy techniques, which increase local control and cure rate of cancer. The contents were 1. technique of stereotactic radiotherapy 2. technique of intraoperative radiation therapy(IORT) 3. technique of fractionated radiotherapy 4. technique of 3D conformal therapy 5. chemoradiotherapy in lung cancer, rectal cancer and biliopancreatic cancer 6. network based information communication system of radiation oncology 7. animal studies for the best application of chemoradiotherapy and for elucidating mechanism of slide effect in radiotherapy. The results were 1. completion of quality assurance protocol, frame and mounting system 2. completion of applicator of IORT 3. clinical protocol of fractionated radiotherapy 4. clinical protocol of 3D conformal therapy for brain, head and neck, breast and lung cancer 5. completion of multimodality treatment protocol for lung, rectal and biliopancreatic cancer 6. completion of database system for patient information and simulation image 7. standardization of estimation for radiation induced pneumonitis in animal model. Future plans are (1) developed fractionated stereotactic radiotherapy system will be commercialized (2) developed applicator of brachytherapy for IORT will be commercialized (3) 3D conformal therapy will increase local control rate for brain tumor and decrease complications such as zerostomia after treatment for nasopharygeal cancer (4) training manpower and skills for randomized clinical trial (5) suggest possibility of clinical usefulness of oral 5-fluorouracil (6) to provide basic technique for electric chart (7) promote developing database system for image information (8) also in view of double edge sword effect of NO, it is possible to modify the NO production from irradiation to increase the tolerance to radiation.

  9. Development of clinical application of radiation

    International Nuclear Information System (INIS)

    Kim, Mi Sook; Yoo, Seoung Yul; Yoo, Hyung Jun

    2000-04-01

    The aim is to develop the clinical radiation therapy techniques, which increase local control and cure rate of cancer. The contents were 1. technique of stereotactic radiotherapy 2. technique of intraoperative radiation therapy(IORT) 3. technique of fractionated radiotherapy 4. technique of 3D conformal therapy 5. chemoradiotherapy in lung cancer, rectal cancer and biliopancreatic cancer 6. network based information communication system of radiation oncology 7. animal studies for the best application of chemoradiotherapy and for elucidating mechanism of slide effect in radiotherapy. The results were 1. completion of quality assurance protocol, frame and mounting system 2. completion of applicator of IORT 3. clinical protocol of fractionated radiotherapy 4. clinical protocol of 3D conformal therapy for brain, head and neck, breast and lung cancer 5. completion of multimodality treatment protocol for lung, rectal and biliopancreatic cancer 6. completion of database system for patient information and simulation image 7. standardization of estimation for radiation induced pneumonitis in animal model. Future plans are 1) developed fractionated stereotactic radiotherapy system will be commercialized 2) developed applicator of brachytherapy for IORT will be commercialized 3) 3D conformal therapy will increase local control rate for brain tumor and decrease complications such as zerostomia after treatment for nasopharygeal cancer 4) training manpower and skills for randomized clinical trial 5) suggest possibility of clinical usefulness of oral 5-fluorouracil 6) to provide basic technique for electric chart 7) promote developing database system for image information 8) also in view of double edge sword effect of NO, it is possible to modify the NO production from irradiation to increase the tolerance to radiation

  10. Development of natural radiation model for evaluation of background radiation in radiation portal monitor

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Bum; Lee, Jin Hyung; Moon, Myung Kook [Radioisotope Research and Development Division, Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-11-15

    In ports and airports, radiation portal monitors (RPM) are deployed to detect illicit radioactive materials. Detected gamma rays in a RPM include background radiation and radiation from a freight. As a vehicle moves through the RPM, the vehicle causes the fluctuations in the natural background radiation signal, which ranges of up to 30%. The fluctuation increases the uncertainty of detection signal and can be a cause of RPM false alarm. Therefore, it is important to evaluate background radiation as well as radiation from a container. In this paper, a natural background radiation model was developed to evaluate RPM. To develop natural background radiation model, a Monte Carlo simulation was performed and compared with experimental measurements from a RPM for {sup 40}K, {sup 232}Th series, and {sup 235}U series, which are major sources of natural background radiation. For a natural radiation source, we considered a cylindrical soil volume with 300 m radius and 1 m depth, which was estimated as the maximum range affecting the RPM by MCNP6 simulation. The volume source model was converted to surface source by using MCNP SSW card for computational efficiency. The computational efficiency of the surface source model was improved to approximately 200 times better than that of the volume source model. The surface source model is composed of a hemisphere with 20 m radius in which the RPM and container are modelled. The natural radiation spectrum from the simulation was best fitted to the experimental measurement when portions of {sup 40}K, {sup 232}Th series, and {sup 235}U series were 0.75, 0.0636, and 0.0552 Bq·g{sup -1}, respectively. For gross counting results, the difference between simulation and experiment was around 5%. The background radiation model was used to evaluate background suppression from a 40 ft container with 7.2 m·s{sup -1} speed. In further study, background models and freight models for RPM in real container ports will be developed and applied to

  11. Development of wall ranging radiation inspection robot

    International Nuclear Information System (INIS)

    Lee, B. J.; Yoon, J. S.; Park, Y. S.; Hong, D. H.; Oh, S. C.; Jung, J. H.; Chae, K. S.

    1999-03-01

    With the aging of nation's nuclear facilities, the target of this project is to develop an under water wall ranging robotic vehicle which inspects the contamination level of the research reactor (TRIGA MARK III) as a preliminary process to dismantling. The developed vehicle is driven by five thrusters and consists of small sized control boards, and absolute position detector, and a radiation detector. Also, the algorithm for autonomous navigation is developed and its performance is tested through under water experiments. Also, the test result at the research reactor shows that the vehicle firmly attached the wall while measuring the contamination level of the wall

  12. Development of wall ranging radiation inspection robot

    Energy Technology Data Exchange (ETDEWEB)

    Lee, B. J.; Yoon, J. S.; Park, Y. S.; Hong, D. H.; Oh, S. C.; Jung, J. H.; Chae, K. S

    1999-03-01

    With the aging of nation's nuclear facilities, the target of this project is to develop an under water wall ranging robotic vehicle which inspects the contamination level of the research reactor (TRIGA MARK III) as a preliminary process to dismantling. The developed vehicle is driven by five thrusters and consists of small sized control boards, and absolute position detector, and a radiation detector. Also, the algorithm for autonomous navigation is developed and its performance is tested through under water experiments. Also, the test result at the research reactor shows that the vehicle firmly attached the wall while measuring the contamination level of the wall.

  13. Development of innovative silicon radiation detectors

    CERN Document Server

    Balbuena, JuanPablo

    Silicon radiation detectors fabricated at the IMB-CNM (CSIC) Clean Room facilities using the most innovative techniques in detector technology are presented in this thesis. TCAD simulation comprises an important part in this work as becomes an essential tool to achieve exhaustive performance information of modelled detectors prior their fabrication and subsequent electrical characterization. Radiation tolerance is also investigated in this work using TCAD simulations through the potential and electric field distributions, leakage current and capacitance characteristics and the response of the detectors to the pass of different particles for charge collection efficiencies. Silicon detectors investigated in this thesis were developed for specific projects but also for applications in experiments which can benefit from their improved characteristics, as described in Chapter 1. Double-sided double type columns 3D (3D-DDTC) detectors have been developed under the NEWATLASPIXEL project in the framework of the CERN ...

  14. Development of radiation protection standards at EPA

    International Nuclear Information System (INIS)

    Meyers, S.

    1987-01-01

    Development of EPA radiation protection standards combines the elements of risk assessment and risk management. The process of risk assessment consists of technical evaluation of the source term, environmental transport mechanisms, and biological effects. Engineering evaluations provide data on control options and costs. The risk management process considers the scope of legal authorities and the balancing of costs and benefits of alternatives within the framework of national priorities. The regulatory process provides for substantial public participation and is subject to legal reviews

  15. The historical development of radiation protection limits

    International Nuclear Information System (INIS)

    Schuettmann, W.

    1976-01-01

    The present internationally largely corresponding radiation protection limits are based on recommendations given by the ICRP in 1965. In order to better understand the underlying concepts, a historical sketch of the development is presented including actual discussions of trends to be excepted. Although exposure of healthy individuals by man-made sources up to these maximum levels is legally permissible, it should be emphasized again and again that any unavoidable exposure must be justified by the need for its associated cause. (author)

  16. Status of radiation applications in developing countries

    International Nuclear Information System (INIS)

    Roushdy, H.M.

    1979-01-01

    A summary is given of the following applications: radiotherapy; sterilization of medical products and biological tissues; inactivation of virus; food preservation; insect control and eradication; improvement in field crops; treatment of waste waters and sewage sludge. In industry, irradiation technology has contributed to the manufacturing industries for new product developments in the plastics, textiles, wood, rubber, petroleum, concrete and chemical industries. Irradiation technology offers a fascinating outlet for developing countries for improving their condition of medical care, upgrading of their natural materials, stimulating their industrial development, decreasing their food losses and increasing their crop production. These lines would certainly contribute to their national economy and would result in an enhanced rate of development. However, transfer of radiation technology to developing countries should be undertaken in view of the actual national and regional needs and supported by an overall well studied national and regional planning for trained manpower development. The choice of a radiation source for a potential application should be based on the demand of the process, compromise between desirability and cost and quantitative data on installation, operation and maintenance conditions, and costs. The program developed and implemented by Egypt is herein presented. Facilities, organization, personnel, current and past activities, and future plans are described. (author)

  17. Development of rubber gloves by radiation vulcanization

    International Nuclear Information System (INIS)

    Makuuchi, K.; Yoshii, F.; Ishigaki, I.; Mogi, M.; Saito, T.

    1990-01-01

    The processes of radiation vulcanization and production of protective rubber gloves for radioactive contamination are described. A newly developed sensitizing system consisting of 5 phr 2-ethylhexyl acrylate and 1 phr carbon tetrachloride was used to vulcanize natural rubber latex at 12 kGy. Transparent and soft gloves were obtained from the radiation vulcanized latex by a coagulant dipping process. The mechanical properties of the gloves meet Japanese Industrial Standard specification for protective gloves. Combustion analysis of the gloves revealed that the amount of evolved sulfur dioxide and remaining ashes are less than those from commercially available rubber gloves. A trial usage of the gloves at a nuclear power plant showed that the gloves were easy to use for delicate work without undergoing fatigue. (author)

  18. Air-crew radiation dosimetry - last development

    International Nuclear Information System (INIS)

    Spurny, F.

    2001-01-01

    Exposure to cosmic radiation increases rapidly with the altitude. At the flight levels of commercial aircraft it is of the order of several μSv per hour. The most of air-crew are exposed regularly to the effective dose exceeding 1 mSv per year, the limit of exposure of non-professionals defined in ICRP 60 recommendation. That is why this problem has been intensively studied from many aspects since the beginning of 90's. This contribution summarises new developments in the field during last two years. First, new international activities are presented, further, new achievement obtained mainly in the author's laboratory are presented and discussed. (authors)

  19. Development of biodegradable fungicide by radiation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Young Keun; Kim, Dong Sub [KAERI, Daejeon (Korea, Republic of)

    2011-01-15

    To develop the fungicide which is biodegradable and alternative to chemical pesticide that has an side effect of environmental pollution, Mutant induction of the enhanced antifungal activity was studied by using radiation. Characteristics and structure of antifungal biomaterials derived from these mutants were analysed. Two biomaterials related to the antifungal activity from the above mutant were isolated and purified. Microbial pesticide were manufactured in combination of various additives. Antiphytopathogenic effects were proven by pot experiment and It was promising to prevent pepper, Chinese cabbage and radish from anthrax, phytophthora and root rot

  20. Development of biodegradable fungicide by radiation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Youngkeun; Kim, Dongsub

    2012-03-15

    To develop the fungicide which is biodegradable and alternative to chemical pesticide that has an side effect of environmental pollution, Mutant induction of the enhanced antifungal activity was studied by using radiation. Characteristics and structure of antifungal biomaterials derived from these mutants were analysed. Two biomaterials related to the antifungal activity from the above mutant were isolated and purified. Microbial pesticide were manufactured in combination of various additives. Antiphytopathogenic effects were proven by field test and it was promising to prevent Chinese cabbage and radish from phytophthora and root rot.

  1. Development of biodegradable fungicide by radiation

    International Nuclear Information System (INIS)

    Lee, Young Keun; Kim, Dong Sub

    2011-01-01

    To develop the fungicide which is biodegradable and alternative to chemical pesticide that has an side effect of environmental pollution, Mutant induction of the enhanced antifungal activity was studied by using radiation. Characteristics and structure of antifungal biomaterials derived from these mutants were analysed. Two biomaterials related to the antifungal activity from the above mutant were isolated and purified. Microbial pesticide were manufactured in combination of various additives. Antiphytopathogenic effects were proven by pot experiment and It was promising to prevent pepper, Chinese cabbage and radish from anthrax, phytophthora and root rot

  2. Development of biodegradable fungicide by radiation

    International Nuclear Information System (INIS)

    Lee, Youngkeun; Kim, Dongsub

    2012-03-01

    To develop the fungicide which is biodegradable and alternative to chemical pesticide that has an side effect of environmental pollution, Mutant induction of the enhanced antifungal activity was studied by using radiation. Characteristics and structure of antifungal biomaterials derived from these mutants were analysed. Two biomaterials related to the antifungal activity from the above mutant were isolated and purified. Microbial pesticide were manufactured in combination of various additives. Antiphytopathogenic effects were proven by field test and it was promising to prevent Chinese cabbage and radish from phytophthora and root rot

  3. Radiation effects on the developing human brain

    International Nuclear Information System (INIS)

    1993-01-01

    The developing human brain has been shown to be especially sensitive to ionizing radiation. Mental retardation has been observed in the survivors of the atomic bombings in Japan exposed in utero during sensitive periods, and clinical studies of pelvically irradiated pregnant women have demonstrated damaging effects on the fetus. In this annex the emphasis is on reviewing the results of the study of the survivors of the atomic bombings in Japan, although the results of other human epidemiological investigations and of pertinent experimental studies are also considered. Refs, 3 figs, 10 tabs

  4. Development trend of radiation biology research-systems radiation biology

    International Nuclear Information System (INIS)

    Min Rui

    2010-01-01

    Radiation biology research has past 80 years. We have known much more about fundamentals, processes and results of biology effects induced by radiation and various factors that influence biology effects wide and deep, however many old and new scientific problems occurring in the field of radiation biology research remain to be illustrated. To explore and figure these scientific problems need systemic concept, methods and multi dimension view on the base of considerations of complexity of biology system, diversity of biology response, temporal and spatial process of biological effects during occurrence, and complex feed back network of biological regulations. (authors)

  5. Modern trends in theoretical radiation chemistry development

    International Nuclear Information System (INIS)

    Kaplan, I.G.

    1983-01-01

    Most important trends in the development of radiation chemitry theory are considered. Wide use of electronic computers for modeling different stages of radiolysis in conjUnction with advanced precision experimental methods (picosecond pulse radiolysis, acceptor additions method, magnetic method of detecting interstitial active particles) is noted. Information obtained in photochemistry and molecular spectroscopy, including laser photolysis, is in common use in developing the theory. It is noted that data on the processes occurring within less than 10 -12 s time can be obtained now only on the base of theoretical representations about the mechanism of ionizing irradiation interaction with molecular medium. Therefore, special attention in the review is paid to investigation of primary radiolysis processes. Besides investigation of primary medium excitation processes theoretical investigations into the ways of energy degradation, knocked out electrons and their further state are continued. It is noted that a considerable number of papers deal with the nature and behaviour of radiation-induced excess electrons in non-polar solutions and solid matrices. Works on application of diffusion kinetics in radiolysis have been developed in recent years

  6. Development of superconducting tunnel junction radiation detectors

    Energy Technology Data Exchange (ETDEWEB)

    Katagiri, Masaki; Kishimoto, Maki; Ukibe, Masahiro; Nakamura, Tatsuya; Nakazawa, Masaharu [Japan Atomic Energy Research Inst., Tokyo (Japan); Kurakado, Masahiko; Ishibashi, Kenji; Maehata, Keisuke

    1998-07-01

    Study on development of high energy resolution X-ray detector using superconducting tunnel junction (STJ) for radiation detection was conducted for 5 years under cooperation of University of Tokyo group and Kyushu University group by Quantum measurement research group of Advanced fundamental research center of JAERI. As the energy resolution of STJ could be obtained better results than that of Si semiconductor detector told to be actually best at present, this study aimed to actualize an X-ray detector usable for the experimental field and to elucidate radiation detection mechanism due to STJ. The STJ element used for this study was the one developed by Kurakado group of Nippon Steel Corp. As a results, some technical problems were almost resolved, which made some trouble when using the STJ element to detection element of X-ray spectrometer. In order to make the X-ray detector better, it is essential to manufacture a STJ element and develop serial junction type STJ element on the base of optimization of the element structure and selection and single crystallization of new superconducting materials such as Ta and others, activating the research results. (G.K.)

  7. The development of wireless radiation dose monitoring using smart phone

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jin Woo; Jeong, Gyo Seong; Lee, Yun Jong [Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of); Kim, Chong Yeal [Chonbuk National University, Jeonju (Korea, Republic of); Lim, Chai Wan [REMTECH, Seoul (Korea, Republic of)

    2016-11-15

    Radiation workers at a nuclear facility or radiation working area should hold personal dosimeters. some types of dosimeters have functions to generate audible or visible alarms to radiation workers. However, such devices used in radiation fields these days have no functions to communicate with other equipment or the responsible personnel. our project aims at the development of a remote wireless radiation dose monitoring system that can be utilized to monitor the radiation dose for radiation workers and to notify the radiation protection manager of the dose information in real time. We use a commercial survey meter for personal radiation measurement and a smart phone for a mobile wireless communication tool and a Beacon for position detection of radiation workers using Blue tooth communication. In this report, the developed wireless dose monitoring of cellular phone is introduced.

  8. Study of characteristics of Forbush decreases detected in 2006 – 2011 by means of muon hodoscope URAGAN

    International Nuclear Information System (INIS)

    Barbashina, N S; Astapov, I I; Borog, V V; Dmitrieva, A N; Kokoulin, R P; Kompaniets, K G; Mishutina, Yu N; Petrukhin, A A; Shutenko, V V; Sit'ko, O A; Yakovleva, E I; Yashin, I I

    2013-01-01

    Results of the study of variations of cosmic ray muon flux at the Earth surface during Forbush decreases (FD) registered in 2006 – 2011 by means of muon hodoscope URAGAN both for the integral counting rate and for different angular intervals are presented. Dependences of the amplitude of the decrease of cosmic ray muon intensity on the energy of primary particles in the energy region above 10 GeV during different phases of the FD were obtained. On the basis of the analysis of spatial-angular distribution of muon flux, values of the horizontal projections of the local anisotropy vector were calculated and their dynamics was studied. Energy, angular and temporal characteristics of Forbush decreases determined from cosmic ray muon data are compared with basic parameters characterizing conditions of near-Earth space before and during FD.

  9. First Measurement of the E Double-polarization Observable for the γη to Κ+Σ- with CLAS & a New Forward Tagger Hodoscope for CLAS12

    Energy Technology Data Exchange (ETDEWEB)

    Fleming, Jamie [Univ. of Edinburgh, Scotland (United Kingdom)

    2016-06-30

    Establishing the excitation spectrum of the nucleon would be a key advance to further our understanding of nucleon structure and Quantum Chromodynamics (QCD). Recent theoretical advances allow predictions of the excitation spectrum of the nucleon and other nucleon properties directly from QCD in the nonperturbative regime, via numerical methods (such as Lattice QCD), complementing existing constituent quark models. There is an ongoing world programme in meson photoproduction from the nucleon, which has already led to a number of nucleon resonances being discovered and established. This advance has largely been made possible by the first accurate measurement of polarisation observables. Available data has been obtained for proton targets, whereas for a complete picture of meson photoproduction, data from the neutron must also be obtained. This is important, as nucleon resonances can have very different photo-couplings to the proton and neutron. This thesis presents the rst measurement of the E double-polarisation observable for the exclusive γη -> Κ+Σ- reaction using a polarised hydrogendeuterium target from the g14 run period at CLAS. Circularly polarised photons of energies between 1:1 and 2:3 GeV were used, with results shown in 200 MeV bins in E and bins of 0:4 in cosθC.M./Κ+ . Further to this, CLAS has undergone a detector upgrade in order to facilitate electrons of up to 12 GeV from Jefferson Lab's upgraded accelerator. Essential to this, is a new system for tagging quasi-real photons by detecting electrons scattered at very small angles. My work includes signicant contributions to the design, realisation and construction of a hodoscope for this forward photon tagging apparatus. Presented in this thesis is a comprehensive overview of my work in developing and constructing the scintillating hodoscope for the CLAS12 Forward Tagger.

  10. Development of radiation processes for better environment

    International Nuclear Information System (INIS)

    Majali, A.B.; Sabharwal, S.; Deshpande, R.S.; Sarma, K.S.S.; Bhardwaj, Y.K.; Dhanawade, B.R.

    1998-01-01

    The increasing population and industrialization, worldover, is placing escalating demands for the development of newer technologies that are environment friendly and minimize the pollution associated with the development. Radiation technology can be of benefit in reducing the pollution levels associated with many processes. The sulphur vulcanization method for natural rubber latex vulcanization results in the formation of considerable amounts of nitrosoamines, both in the product as well as in the factory environment. Radiation vulcanization of natural rubber latex has emerged as a commercially viable alternative to produce sulphur and nitrosoamine free rubber. A Co-60 γ-radiation based pilot plant has been functioning since April 1993 to produce vulcanized natural rubber latex (RVNRL) using acrylate monomers as sensitizer. The role of sensitizer, viz. n-butyl acrylate in the vulcanization process has been elucidated using the pulse radiolysis technique. Emission of toxic sulphur containing gases form an inevitable part of viscose-rayon process and this industry is in search of ways to reduce the associated pollution levels. The irradiation of cellulose results in cellulose activation and reduction in the degree of polymerization (DP). These effects can reduce the solvents required to dissolve the paper pulp. There is a keen interest in utilizing radiation technology in viscose rayon production. We have utilized the electron beam (EB) accelerator for reducing the degree of polymerization (DP) of paper pulp. Laboratory scale tests have been carried out to standardize the conditions for production of pulp having the desired DP by EB irradiation. The use of irradiated paper pulp can result in ∼40% reduction in the consumption of CS 2 in the process that can be beneficial in reducing the pollution associated with the process. PTFE waste can be recycled into a low molecular weight microfine powder by irradiation. An EB based process has been standardized to produce

  11. Development of radiation detection and measurement systems

    Energy Technology Data Exchange (ETDEWEB)

    Moon, B. S.; Ham, C. S.; Chung, C. E. and others

    2000-03-01

    This report contains descriptions on the following six items. The first item is the result of a study on CsI(TI) crystals with their light emitting characteristics and the result of a study on plastic scintillators. The second item is the result of a study on advanced radiation detectors and includes experiments for the effect of using a Compton suppressor with an HPGe detector. For the third item, we describe the results of a design work done using EGS4 for a thickness gauge, a density gauge, and a level gauge. The fourth item contains descriptions on the prototype circuit systems developed for a level gauge, a thickness gauge, and for a survey meter. The fifth part contains the computed tomography algorithm and a prototype scanning system developed for a CT system. As the sixth and the last item, we describe the prototype high precision heat source and the prototype heat-voltage converter which we have designed and fabricated.

  12. NASA space radiation transport code development consortium

    International Nuclear Information System (INIS)

    Townsend, L. W.

    2005-01-01

    Recently, NASA established a consortium involving the Univ. of Tennessee (lead institution), the Univ. of Houston, Roanoke College and various government and national laboratories, to accelerate the development of a standard set of radiation transport computer codes for NASA human exploration applications. This effort involves further improvements of the Monte Carlo codes HETC and FLUKA and the deterministic code HZETRN, including developing nuclear reaction databases necessary to extend the Monte Carlo codes to carry out heavy ion transport, and extending HZETRN to three dimensions. The improved codes will be validated by comparing predictions with measured laboratory transport data, provided by an experimental measurements consortium, and measurements in the upper atmosphere on the balloon-borne Deep Space Test Bed (DSTB). In this paper, we present an overview of the consortium members and the current status and future plans of consortium efforts to meet the research goals and objectives of this extensive undertaking. (authors)

  13. Development of radiation detection and measurement systems

    International Nuclear Information System (INIS)

    Moon, B. S.; Ham, C. S.; Chung, C. E. and others

    2000-03-01

    This report contains descriptions on the following six items. The first item is the result of a study on CsI(TI) crystals with their light emitting characteristics and the result of a study on plastic scintillators. The second item is the result of a study on advanced radiation detectors and includes experiments for the effect of using a Compton suppressor with an HPGe detector. For the third item, we describe the results of a design work done using EGS4 for a thickness gauge, a density gauge, and a level gauge. The fourth item contains descriptions on the prototype circuit systems developed for a level gauge, a thickness gauge, and for a survey meter. The fifth part contains the computed tomography algorithm and a prototype scanning system developed for a CT system. As the sixth and the last item, we describe the prototype high precision heat source and the prototype heat-voltage converter which we have designed and fabricated

  14. Developing positive worker attitudes toward radiation protection

    International Nuclear Information System (INIS)

    Millis, N.L.

    1987-01-01

    Teamwork, productivity, and reducing exposure are admirable goals presented to the workers in a nuclear power plant. A common thread to achievement in these areas resides in worker attitudes toward the tasks presented. A positive, alert, and cooperative attitude is an element in a worker's mind that must be created and maintained by good leadership and management practices. At the Calvert Cliffs Nuclear Power Plant, management has used certain strategies to foster good positive worker attitudes toward radiation protection and quality workmanship in all tasks. Strategies differ from management by objectives in that they have no deadlines or timetables in and of themselves. Rather, strategies are preplanned methods that can be called upon when the opportunity arises to improve worker attitudes. A series of five strategies for positive attitude development are described in the full paper. The strategies are identified with buzz words to allow the user a recall mechanism (as with the acronyms abounding in the nuclear industry). They cover the range of management techniques from example setting to reward/recognition. Although not unique to radiation exposure management, nor all inclusive, the strategies provide some though stimulation in creating productive worker attitudes

  15. Development of functional foods for radiation workers

    Energy Technology Data Exchange (ETDEWEB)

    Jo, Sung Kee; Yu, Young Beob; Park, Hae Ran; Byun, Myung Woo; Yang, Jae Seung; Kim, Sung Ho; Yee, Sung Tae

    2000-03-01

    In searching modulators of immunity and hematopoiesis among natural products, being used as foods, six herbs exhibited lymphocyte proliferation in vitro, and six exhibited augmentation of hematopoietic cell growth. The combined treatments showed synergistic effects of lymphocyte proliferation and of hematopoietic cell growth. On the other hand, we found four effective oriental medicinal prescriptions, used as energy tonic or blood-building decoctions, for survival and regeneration of hematopoietic cells and for protection of stem cells of intestinal crypt in irradiated mice. On the basis of these results, extracts from combinations of herbs were made in expectation of higher effects in the three respects. In immuno modulation activity by the two combinations of herbs was confirmed in mice. In culture of bone narrow cells, growth improvement of non-adherent precursor and induction of cytokine expression by herb mixture extracts were observed. In evaluation of fractions, polysaccharide fraction showed modulation of immunity and hematopoiesis, and methanol fraction showed stem cell protection from radiation. On the basis of the results, we made two provisional products by addition of polysaccharide fraction to the water extract. In further research, the active components would be identified and the fractional foods would be developed for overcoming of declined immunity and radiation damage. For security of sanitation by irradiation, the stability in activity of irradiated resources was confirmed. (author)

  16. The development of Radiation Protection Training courses in the UK

    International Nuclear Information System (INIS)

    Paynter, R. A.

    2003-01-01

    This paper considers use of modern training materials and aids in radiation protection training activities. The development in the UK of training courses to satisfy the training requirements for Radiation Protection Advisers is also discussed. (Author)

  17. Diamond radiation detectors II. CVD diamond development for radiation detectors

    International Nuclear Information System (INIS)

    Kania, D.R.

    1997-01-01

    Interest in radiation detectors has supplied some of the impetus for improving the electronic properties of CVD diamond. In the present discussion, we will restrict our attention to polycrystalhne CVD material. We will focus on the evolution of these materials over the past decade and the correlation of detector performance with other properties of the material

  18. Recent developments in radiation equipment and radioisotopes

    International Nuclear Information System (INIS)

    Beddoes, J.M.

    1978-09-01

    A review is given of the technology of the uses of radiation equipment and radioisotopes, in which field Canada has long been a world leader. AECL Commercial Products has pioneered many of the most important applications. The development and sale of Co-60 radiation teletherapy units for cancer treatment is a familiar example of such an application and Commercial Products dominates the world market. Another such example is the marketing of Mo-99, which is produced in the NRX and NRU reactors at Chalk River, and from which the short-lived daughter Tc-99 is eluted as required for use in in-vivo diagnosis. New products coming into use for this purpose include Tl-201, I-123, Ga-67 and In-111, all produced in the TRIUMF cyclotron in Vancouver, while I-125 continues to be in demand for in-vitro radioimmunoassays. Radioisotopes continue to play an important part in manufacturing, where their well-known uses include controlling thickness, contents, etc., in production, and industrial radiography. The application of large industrial irradiators for the sterilization of medical products is now a major world industry for which Commercial Products is the main manufacturer. Isotopes are also used in products such as smoke detectors. Isotopes continue to find extensive use as tracers, both in industrial applications and in animal and plant biology studies. Some more recent uses include pest control by the Σsterile maleΣ technique and neutron activation and delayed neutron counting in uranium assay. The review concludes with an account of the development and prospects of AECL Commercial Products. (author)

  19. Design and development of radiation absorber for sighting beam line

    International Nuclear Information System (INIS)

    Sridhar, R.; Shukla, S.K.

    2005-01-01

    During the commissioning of Indus-2 , it is necessary to view the synchrotron radiation that will be emanating from the dipole exit ports. The 10 0 beam line from dipole 11 was earmarked for sighting beam line. The synchrotron radiation power density would be around 340 watts on the photon absorber inside the radiation absorber module, at the specified beam power of Indus-2. The beam striking on this photon absorber produces x-rays and Bremsstrahlung radiation. These are to be stopped and absorbed by radiation absorber. The photon absorber and the radiation absorber are integrated in a single vacuum chamber and actuated by a pneumatic cylinder connected using a bellow. Radiation absorber was needed to isolate the diagnostic components and to protect them from radiation a well as heat when they were not in use. The paper describes the design, calculation and development of the dynamic photon cum radiation absorber. The ultimate vacuum performance is also described. (author)

  20. The development of the international and national radiation protection law

    International Nuclear Information System (INIS)

    Bischof, W.

    1978-01-01

    The author reports in detail about the development of the international radiation protection law, gives a general survey of domestic legislation in the FRG and abroad and presents the individual problems of the radiation protection laws in a comparative way, such as radiation protection principles/dose limit values, licensing and monitoring regulations disposal of radioactive wastes, application of ionising rays and radioactive substances to men as well as protection from non-ionising radiation. (UN) [de

  1. The liquid droplet radiator: Status of development

    Science.gov (United States)

    Persson, J.

    1991-12-01

    The ever greater amounts of power to be dissipated onboard future spacecraft, together with their limited external dimensions, will make it increasingly difficult to use conventional radiator technology without imposing a severe mass penalty. Hunting for lightweight alternatives to current heat rejection systems has become a matter of growing urgency, which explains the great interest that the Liquid Droplet Radiator (LDR) has attracted. Tradeoff analyses indicate that an LDR may be as much as an order of magnitude lighter than a comparable conventional radiator. A literature study examining the progress of the LDR research and some of its possible applications is reviewed. An investigation of the LDR heat rejection capability is presented.

  2. Development of rubber material for high radiation field

    International Nuclear Information System (INIS)

    Nakatsukasa, Sadayoshi; Tabasaki, Takeshi; Yoshida, Akihiro; Kadowaki, Yoshito

    2013-01-01

    Generally flexible polymeric materials exposed to radiation can't be used because they soften or harden remarkably in high radiation environment. Aromatic polymers such as PEEK, PI, and PES are also known as radiation-proof polymeric materials. Aromatic polymers are very hard, they can't be used for products like a packing where flexibility is required. We developed a new vulcanized rubber compound by the use of various additives and polymer blend. This developed rubber compound has a high radiation-proof performance by reaction balance of cross-linking and decomposition in this rubber. This rubber compound has a rubber elasticity even if exposed to radiation of MGy level, and its radiation proof is more than 5 times as high as conventional polymeric materials. This rubber compound is much more flexible than the aromatic polymers which are the used as conventional radiation-proof polymers. (author)

  3. Developments in assessing carcinogenic risks from radiation

    International Nuclear Information System (INIS)

    Beebe, G.W.

    1984-01-01

    The papers in this volume have ranged widely over theoretical, experimental, and epidemiologic topics relating to radiation carcinogenesis. The multistage character of carcinogenesis, emphasis on the ease with which the initial event occurs in contrast to the infrequency of carcinogenic expression, the role of cell repair, and factors that may influence expression were major themes of the theoretical and experimental papers. The elegance of the cell transformation tool was illustrated in reviews of experimental work dealing with the exposure and environmental variables that influence radiation-induced transformation, among them the intracellular environment. Arguments were advanced for the view that more than one cell must be affected by radiation if a critical event is to occur. The relative congruence of carcinogens and clastogens was noted, and the suggestion made that the rules governing the induction of chromosomal aberrations by ionizing may apply to radiation carcinogenesis as well

  4. Development of inorganic composites with radiation

    International Nuclear Information System (INIS)

    Kasamatsu, Tomomichi

    1974-01-01

    The applications of radiation to fiber reinforced plastics, concrete polymer composites, and other resin composites are reviewed. The radiation method for hardening glass fiber and unsaturated polyester composite has been studied in place of conventional catalytic thermosetting method. In the catalytic thermosetting method, operation cycle time is 2 to 3 minutes, but the radiation method requires only a few seconds with a 100 mA electron accelerator. A pilot plant was equipped with an accelerator of 3 MeV, and the dimensions were 60 cm in width and 2 m in irradiation part length. The manufacturing cost by the radiation method may be one third or a half of that of catalytic thermosetting method. The degree of reaction of the product hardened by the radiation method was almost 100%, and its weight reduction was notable to be recognized, so that the radiation method can eliminate the step of heating at 100 0 C for 2 hours required for the catalytic thermosetting method. The visible light transparency of the product by radiation method is excellent. Its bending strength is higher than that of thermosetting products. With the lapse of time after irradiation, the bending strength improves as much as 10%. This improvement is a special feature of the radiation method, and seems to be caused by the life of radicals of solid. Concrete polymer composites are produced by drying basic materials, deairing in vacuum, impregnating a monomer, packaging and irradiating the impregnated material. The bending and compression strength of the product are twice as high as those of the product by conventional method. Coral-resin MMA composite shows pretty striae and color contrast. Red mud - modified polyethylene composite gives bending strength of 350 kg/cm 2 . (Iwakiri, K.)

  5. Development of radiation resistant organic composites for cryogenic use

    International Nuclear Information System (INIS)

    Nishijima, S.

    1997-01-01

    The mechanism of the radiation induced degradation of the mechanical properties in composite materials have been studied and based on the mechanism the radiation resistant organic composites for fusion magnet have been developing. It was found that the degradation was brought by the change of the fracture mode from tensile (or flexural) to shear failure. Consequently the intrinsic parameter which control the degradation was concluded to be the interlaminar shear strength. To develop the radiation resistant composites, therefore, means to develop the composites showing the radiation resistant interlaminar shear strength. The mechanism was confirmed using three dimensional fabric reinforced plastics which do not have the interlaminar area. The roles of matrix in the composites were also revealed. The effects of dose quality and irradiated temperature on the radiation induced degradation were also discussed and the selection standards of the components for radiation resistant composites were proposed

  6. Development of advanced natural polymer using radiation technology

    International Nuclear Information System (INIS)

    Kang, Phil Hyun; Nho, Young Chang; Jeon, Jun Pyo

    2012-01-01

    This project was performed to develop the environment-friendly and higher value-added materials using natural polymers derivatives from biotic-resources by radiation technology. To study for structural change of natural polymer by radiation, the effect of electron beam and Gamma ray into four kinds of plants such as Kenaf core, kenaf bast, ock and cornhusk was investigated. As results of analysis about structural change of natural polymer by radiation, efficiently separating process of Lignin was developed by improved decomposition of Lignin with increasing power of radiation. Environ-friendly separating process of Cellulose and Lignin using radiation and water-cook was developed without toxically chemical treatment. Papers were fabricated by cellulose and tensile strength of pulp fabricated by radiation was invested properties of pulp depending on power of radiation. High purity cellulose was fabricated by reduced chemical ratio between hemi-cellulose and Lignin with control of radiative power. Manufacturing process of natural paper highly containing cellulose content was developed using efficient separation of cellulose from ock tree, kenaf core and kenaf bast through radiation technique. Cellulose fiber was fabricated using separated cellulose by radiation through the drying and wetting spinning with methanol and water. Also nano-fiber with Lignin was made by electro-spinning with different ratio between PAN and Lignin. Effect of thermal treatment and carbonization of fabricated nano-fiber was invested. Carbon fiber with Lignin was applied to high value-added a secondary battery used as a cathode in half cell type. The secondary battery with carbon fiber with Lignin used as a cathode showed very efficient performance, which revealed capacity-preservation with 100% during 100 cycles. This project could significantly contribute to national competitiveness with radiation technology and Low-carbon and green-growth industrial technology, based on securement of

  7. Utilization of SRNL-developed radiation-resistant polymer in high radiation environments

    Energy Technology Data Exchange (ETDEWEB)

    Skibo, A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-09-27

    The radiation-resistant polymer developed by the Savannah River National Laboratory is adaptable for multiple applications to enhance polymer endurance and effectiveness in radiation environments. SRNL offers to collaborate with TEPCO in evaluation, testing, and utilization of SRNL’s radiation-resistant polymer in the D&D of the Fukushima Daiichi NPS. Refinement of the scope and associated costs will be conducted in consultation with TECPO.

  8. Recent developments in radiation field control technology

    International Nuclear Information System (INIS)

    Wood, C.J.

    1995-01-01

    The U.S. nuclear power industry has been remarkably successful in reducing worker radiation exposures over the past ten years. There has been over a fourfold reduction in the person-rem incurred for each MW.year of electric power generated: from 1.8 in 1980, to only 0.39 person-rems in 1991 and 1992. Preliminary data for 1993 are even lower: approximately 0.37 person-rem.MW.year. Despite this substantial improvement, challenges for the industry remain. Individual exposure limits have been tightened in ICRP 60 and there will be increased requirements for special maintenance work as plants age, suggesting that vigorous efforts with be increased requirements for special maintenance work as plants age, suggesting that vigorous efforts will be required to meet the industry goals for 1995. Reducing out-of-core radiation fields offer the best chance of continuing the downward trend in exposures. To assist utilities select the most economic technology for their specific plants, EPRI has published a manual capturing worldwide operating experience with radiation-field control techniques (TR-100265). No one method will suffice, but implementing suitable combinations from this collection will enable utilities to achieve their exposure goals. Radiation reduction is generally cost-effective: outages are shorter, manpower requirements are reduced and work quality is improved. Despite the up front costs, the benefits over the following 1-3 years typically outweigh the expenses

  9. Recent developments in radiation field control technology

    Energy Technology Data Exchange (ETDEWEB)

    Wood, C.J. [Electric Power Research Institute, Palo Alto, CA (United States)

    1995-03-01

    The U.S. nuclear power industry has been remarkably successful in reducing worker radiation exposures over the past ten years. There has been over a fourfold reduction in the person-rem incurred for each MW.year of electric power generated: from 1.8 in 1980, to only 0.39 person-rems in 1991 and 1992. Preliminary data for 1993 are even lower: approximately 0.37 person-rem.MW.year. Despite this substantial improvement, challenges for the industry remain. Individual exposure limits have been tightened in ICRP 60 and there will be increased requirements for special maintenance work as plants age, suggesting that vigorous efforts with be increased requirements for special maintenance work as plants age, suggesting that vigorous efforts will be required to meet the industry goals for 1995. Reducing out-of-core radiation fields offer the best chance of continuing the downward trend in exposures. To assist utilities select the most economic technology for their specific plants, EPRI has published a manual capturing worldwide operating experience with radiation-field control techniques (TR-100265). No one method will suffice, but implementing suitable combinations from this collection will enable utilities to achieve their exposure goals. Radiation reduction is generally cost-effective: outages are shorter, manpower requirements are reduced and work quality is improved. Despite the up front costs, the benefits over the following 1-3 years typically outweigh the expenses.

  10. Development of clean environment conservation technology by radiation

    International Nuclear Information System (INIS)

    Lee, Myunjoo; Kim, Tak Hyun; Jung, In Ha

    2012-04-01

    This report is aim to develop the technology for environmental conservation by radiation. It is consisted of two research parts. One is development of wastewater disinfection technology by radiation and the other is development of livestock waste treatment technology by radiation. For the development of wastewater disinfection technology disinfect ion process, technology for treatment of toxic organic chemicals and assessment of ecological toxicity, technology for treatment of endocrine disrupting chemicals and assessment of genetic safety were developed. For the development of livestock waste treatment technology, process for simultaneous removal of nutrients, technology for disinfection and quality enhancement of livestock waste compost, technology for reduction of composting periods, monitoring of toxic organic compounds, pretreatment technology for organic toxic chemicals and enhancement of biological treatment efficiencies were developed. Based on basic research, advanced livestock wastewater treatment process using radiation was established

  11. Development of radiation-resisting high molecular-weight materials

    International Nuclear Information System (INIS)

    Nakagawa, Tsutomu

    1976-01-01

    The excellent radiation-resisting polyvinyl chloride developed at the opportunity of the research on the relationships between the protection of living body and the polymer-technological protection from radiation is reviewed. The report is divided into four main parts, namely 1) the change in the molecular arrangement of market-available, high molecular-weight materials by gamma-ray irradiation, 2) the protection of high molecular-weight materials from radiation, 3) the relationships between the biological radiation-protective substances and the change to radiation-resisting property of synthesized high molecular-weight substances, and 4) the development of the radiation-resisting high molecular-weight materials as metal-collecting agents. Attention is paid to the polyvinyl chloride having N-methyl-dithio-carbamate radical (PMD), synthesized by the author et. al., that has excellent radiation-resisting property. PMD has some possibility to form thiol- and amino-radicals necessary to protect living things from radiation. It is believed that the protection effects of N-methyl-dithio-carbamate radical are caused by the relatively stable S radical produced by the energy transfer. PMD film is suitable for the irradiation of foods, because it hardly changes the permeability of oxygen and carbon dioxide. PMD produces mercaptide or chelate. A new metal-collecting agent (PSDC) having reactivity with the metallic ions with radiation-resisting property was developed, which is derived from polyvinyl chloride and sodium N-methyl-N-carboxy-methyl-dithio-carbamate. (Iwakiri, K.)

  12. Development of radiation preservation technique in Beijing

    International Nuclear Information System (INIS)

    Zhang Hongdi; Li Guixiang; Pang Mei

    1990-12-01

    The 60 Co radiation preservation technique which was used to preserve persimmons, green peppers and four varieties of apple was studied. Apples and persimmons were irradiated with 0.1 ∼ 0.7kGy and 0.1 ∼ 1.0kGy respectively, then they were stored under a constant environmental temperature. Green peppers were treated with heat, irradiated with low dose and stored at low temperature. After a certain time of storing, the results showed that the quality of irradiated groups was better than control group, and there was no difference of main nutrient components between the irradiated groups and the control group. Finally, the radiation processing does not cause radioactivity increasing and microelements decreasing in the food

  13. Development of new portable radiation counters for promotion of better understanding of radiation by the public

    International Nuclear Information System (INIS)

    Tanabe, Hiroshi

    1995-01-01

    This study aims to promote the correct understanding of radiation to the public. All the questions asked by participants at forums held in Aomori, where commercial nuclear fuel cycle facilities are planned, were studied. More than half of these questions were concerned about radiation hazards. Measurements, using radiation counters at the meeting, provided the most effective means of explanation about radiation hazards to the public. For this purpose, portable β- and α-ray counters, being able to detect small amounts of radioactive substances around us, were developed. Each new counter is easily handled, is light-weight (about 10-20% that of domestic survey meters) and inexpensive (about 20-25% the price). The methods used to explain radiation with both counters have been also studied. This explanation has provided the public with a better understanding of the nature and hazards of radiation on human health than the former methods using textbooks. (author)

  14. Uses of radiation for development and welfare

    International Nuclear Information System (INIS)

    Machi, S.

    2005-01-01

    The economic scale of radiation application in the major fields, such as industry, medical care, and agriculture is comparable to that of nuclear power in Japan and in USA where 53 and 103 nuclear power plants are in operation, respectively. The major tool of radiation application for industry and health care is electron accelerator of which reliability has been much improved in the past 3 decades. There are about 13000 accelerators installed worldwide, of which 1200 are used for industrial applications. The upgrading of polymers by the radiation cross-linking and grafting by electron beams is extensively used for the production of high quality automobile tires, heat resistant wires and heat shrinkable materials and others. The growing applications of electron accelerator are sterilization of medical products and food packaging as well as cleaning exhaust gases and wastes water for environmental protection. The functional polymers such as battery separators, deodorant fibers, and wound dressing hydrogel are effectively produced by the use of electron accelerators. Very low energy electron accelerator of 20-200keV is used for curing of surface coating without emission of organic solvent. Ion accelerators are widely used for the ion-implantation for semiconductor production and surface modification. More than 1000 ion accelerators are used in Japan for these applications. The world first medical ion accelerator in Japan has proven with more than 2,000 clinical test that it can provide highly effective radio-therapy of cancer. The synchrotron orbital radiation is used for material research. New accelerators based spallation neutron sources are under construction in Japan, USA and Europe (UK) for basic sciences and technology. They produce extremely high flux neutron in pulsed mode which is not available from reactor-based source. Accelerator is an effective tool for nanotechnology. (author)

  15. Development of Australia's radiation protection standards

    International Nuclear Information System (INIS)

    Mason, G.C.; Lokan, K.H.

    1994-01-01

    Australia is revising its existing recommendations concerning radiation protection in the light of guidance from the International Commission on Radiological Protection's Publication 60 and the International Atomic Energy Agency's revision of its Basic Safety Standards. The paper discusses the major refinements of the ICRP's recommendations and the additional guidance on its practical implementation offered by the IAEA's new Basic Safety Standards. Following public comment, the revised Australian recommendations are expected to be adopted by the end of 1994. 15 refs

  16. Developments and prospects of radiation chemistry

    International Nuclear Information System (INIS)

    Imamura, Masashi

    1984-01-01

    The fruitful achievement which has been obtained in the radiation chemistry laboratory of the Institute of Physical and Chemical Research during the research for twenty years from 1963 to 1983 is summarized in this review. In the section of investigation of radiation-induced chemical reaction, the new problems and their interpretation of LET effect in the case of aqueous solution of ferrous chloride and liquid organic compound, and the radiation chemistry of liquid methanol are described, and in the section of investigation of ion-radicals, low temperature rigid solution-γ-ray irradiation method including the outline of the method and the electron absorption spectra of ion-radicals and the structure are described. In the section of pulse-radiolysis method (pulsed electron beam irradiation method), the application to the investigation of dimer cations, the initial process of dimer anions and ionic polymerization, the solvation process of anion radicals, and the long distance transfer of electrons in amorphous solid are explained. In the section of research on metal porphyrin complex related to the chemical conversion of solar energy, chlorophyll-a and its dimer, and synthetic metal porphyrin complex, and in the section of research on photochemical reaction, photochemical reaction and the chemical effect on radioactive disintegration are explained. (Yoshitake, I.)

  17. Recent developments in analytical detection methods for radiation processed foods

    International Nuclear Information System (INIS)

    Wu Jilan

    1993-01-01

    A short summary of the programmes of 'ADMIT' (FAO/IAEA) and the developments in analytical detection methods for radiation processed foods has been given. It is suggested that for promoting the commercialization of radiation processed foods and controlling its quality, one must pay more attention to the study of analytical detection methods of irradiated food

  18. Nuclear and radiation techniques - state of art and development trends

    International Nuclear Information System (INIS)

    Chmielewski, A.G.

    1995-01-01

    The state of art and development trends of nuclear and radiation techniques in Poland and worldwide have been presented. Among them the radiometric gages, radiation technologies, radiotracer methods and measuring systems for pipeline and vessels, brightness control have been described and their applications in industry, agriculture, health and environment protection have been shown and discussed. 35 refs, 1 fig

  19. Development of Nuclide Recognizing Prompt Radiation Distribution Monitoring System

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Uk Jae; Yoo, Dong Han; Kim, Hee Reyoung [Ulsan National Institute of Science and Technology, Ulsan (Korea, Republic of)

    2014-05-15

    The geographic data such as latitude, longitude and map image can be obtained by using GPS and digital map. Radiation data can be acquired by detector. Finally simultaneous visibility system can be operated by using CDMA. Existing radiation distribution monitoring system is based on random generated data. However the radiation distribution monitoring system is developed. It is based on real detected data. Connection between the detector and laptop which are located at a site place is operated by using Bluetooth. CDMA is used to simulate visibility system between laptop in a site place and server PC in the control office. Real map image is taken from digital map. Finally radiation distribution contour map on the real map image can be shown by using MATLAB. 5 figures appear which shows natural, {sup 137}Cs, {sup 131}I, artificial and total radiation dose rate. So this system can be used in everywhere to check the distribution of radiation with geographic information.

  20. The development of remote wireless radiation dose monitoring system

    International Nuclear Information System (INIS)

    Lee, Jin-woo; Jeong, Kyu-hwan; Kim, Jong-il; Im, Chae-wan

    2015-01-01

    Internet of things (IoT) technology has recently shown a large flow of IT trends in human life. In particular, our lives are now becoming integrated with a lot of items around the 'smart-phone' with IoT, including Bluetooth, Near Field Communication (NFC), Beacons, WiFi, and Global Positioning System (GPS). Our project focuses on the interconnection of radiation dosimetry and IoT technology. The radiation workers at a nuclear facility should hold personal dosimeters such as a Thermo-Luminescence Dosimeter (TLD), an Optically Stimulated Luminescence Dosimeter (OSL), pocket ionization chamber dosimeters, an Electronic Personal Dosimeter (EPD), or an alarm dosimeter on their body. Some of them have functions that generate audible or visible alarms to radiation workers in a real working area. However, such devices used in radiation fields these days have no functions for communicating with other areas or the responsible personnel in real time. In particular, when conducting a particular task in a high dose area, or a number of repair works within a radiation field, radiation dose monitoring is important for the health of the workers and the work efficiency. Our project aims at the development of a remote wireless radiation dose monitoring system (RWRD) that can be used to monitor the radiation dose in a nuclear facility for radiation workers and a radiation protection program In this project, a radiation dosimeter is the detection device for personal radiation dose, a smart phone is the mobile wireless communication tool, and, Beacon is the wireless starter for the detection, communication, and position of the worker using BLE (Bluetooth Low Energy). In this report, we report the design of the RWRD and a demonstration case in a real radiation field. (authors)

  1. The development of remote wireless radiation dose monitoring system

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jin-woo [KAERI - Korea Atomic Energy Research Institute, Jeongup-si (Korea, Republic of); Chonbuk National University, Jeonjoo-Si (Korea, Republic of); Jeong, Kyu-hwan [KINS - Korea Institute of Nuclear Safety, Daejeon-Si (Korea, Republic of); Kim, Jong-il [Chonbuk National University, Jeonjoo-Si (Korea, Republic of); Im, Chae-wan [REMTECH, Seoul-Si (Korea, Republic of)

    2015-07-01

    Internet of things (IoT) technology has recently shown a large flow of IT trends in human life. In particular, our lives are now becoming integrated with a lot of items around the 'smart-phone' with IoT, including Bluetooth, Near Field Communication (NFC), Beacons, WiFi, and Global Positioning System (GPS). Our project focuses on the interconnection of radiation dosimetry and IoT technology. The radiation workers at a nuclear facility should hold personal dosimeters such as a Thermo-Luminescence Dosimeter (TLD), an Optically Stimulated Luminescence Dosimeter (OSL), pocket ionization chamber dosimeters, an Electronic Personal Dosimeter (EPD), or an alarm dosimeter on their body. Some of them have functions that generate audible or visible alarms to radiation workers in a real working area. However, such devices used in radiation fields these days have no functions for communicating with other areas or the responsible personnel in real time. In particular, when conducting a particular task in a high dose area, or a number of repair works within a radiation field, radiation dose monitoring is important for the health of the workers and the work efficiency. Our project aims at the development of a remote wireless radiation dose monitoring system (RWRD) that can be used to monitor the radiation dose in a nuclear facility for radiation workers and a radiation protection program In this project, a radiation dosimeter is the detection device for personal radiation dose, a smart phone is the mobile wireless communication tool, and, Beacon is the wireless starter for the detection, communication, and position of the worker using BLE (Bluetooth Low Energy). In this report, we report the design of the RWRD and a demonstration case in a real radiation field. (authors)

  2. Development of the upgraded LHCf calorimeter with $Gd_2SiO_5$ (GSO) scintillators

    CERN Document Server

    Makino, Yuya; Berti, E; Bonechi, L; Bongi, M; Castellini, G; D’Alessandro, R; Del Prete, M; Haguenauer, M; Itow, Y; Kasahara, K; Masuda, K; Matsubayashi, E; Menjo, H; Mitsuka, G; Perrot, A L; Ricciarini, S; Sako, T; Sakurai, N; Sugiura, Y; Suzuki, T; Tamura, T; Tiberio, A; Torii, S; Tricomi, A; Turner, W C; Zhou, Q D

    2014-01-01

    The Large Hadron Collider forward (LHCf) experiment was motivated to understand the hadronic interaction relevant to the cosmic-ray air shower development. LHCf has installed compact calorimeters at the LHC and observed neutral particles emitted around zero degree during 0.9, 2.76 and 7 TeV pp collisions and 5 TeV pPb collisions. Since the next operation in 2015 is expected under much higher radiation dose, we have upgraded the detectors, especially their scin- tillators, to be radiation harder. In this paper, we report the performance of the new imaging sensor, GSO-bar hodoscope tested by heavy-ion beam and 50-250 GeV electron beams. As the result, shower-peak position resolution of 123 m m for 100 GeV electron induced showers was achieved that is satisfactory for our physics goal

  3. Prenatal radiation injury and immune development

    International Nuclear Information System (INIS)

    Nold, J.B.; Miller, G.K.; Benjamin, S.A.

    1985-01-01

    Previous studies demonstrated a significant reduction in thymic medullary and epithelial volumes in irradiated canine fetuses. The present study was performed to determine if this prenatal radiation-induced damage persists and is accompanied by functional immune abnormalities after birth. Six pregnant beagle dogs received sham-irradiation or single abdominal exposures to 200R of 60Co radiation at 35 days gestation. The mean fetal dose was approximately 1.5 Gy. Half the dogs of each litter were sacrificed at birth; half were sacrificed at 24 weeks of age. Following sacrifice, thymus sections from each dog were examined morphometrically. The following in vitro and in vivo assays were performed at selected times; lymphocyte blastogenesis, hematology, bone marrow progenitor cell (CFU-GM) colony growth, humoral antibody response to sheep red blood cells, dinitrochloro-benzene skin sensitization, and gross and histopathology. When compared with age-matched controls, thymic medullary volumes in irradiated dogs were significantly reduced at birth; but, by 24 weeks of age, were similar to control values. At 12-16 weeks of age irradiated dogs showed a significant decrease in humoral antibody responses to inoculated sheep red blood cells. In vitro culture of bone marrow demonstrated a significant reduction of CFU-GM colony growth in irradiated dogs at 24 weeks of age. This was accompanied by a reduction in peripheral white blood cell counts in these dogs from 12-24 weeks of age. These data suggest that radiation injury to the fetal lymphohematopoietic system results in significant postnatal immunologic and hematopoietic defects

  4. Development of Software for Measurement and Analysis of Solar Radiation

    International Nuclear Information System (INIS)

    Mohamad Idris Taib; Abul Adli Anuar; Noor Ezati Shuib

    2015-01-01

    This software was under development using LabVIEW to be using with StellarNet spectrometers system with USB communication to computer. LabVIEW have capabilities in hardware interfacing, graphical user interfacing and mathematical calculation including array manipulation and processing. This software read data from StellarNet spectrometer in real-time and then processed for analysis. Several measurement of solar radiation and analysis have been done. Solar radiation involved mainly infra-red, visible light and ultra-violet. With solar radiation spectrum data, information of weather and suitability of plant can be gathered and analyzed. Furthermore, optimization of utilization and safety precaution of solar radiation can be planned. Using this software, more research and development in utilization and safety of solar radiation can be explored. (author)

  5. Effects of radiation on the developing dentition and supporting bone

    International Nuclear Information System (INIS)

    Carl, W.; Wood, R.

    1980-01-01

    Underdevelopment of teeth after exposure to radiation has been observed since the early experiments with x rays. Two patients had been irradiated at young ages for embryonal rhabdomyosarcomas. For the patient treated with radiation at age 4 for a lesion in the submandibular area, root development of the mandibular teeth stopped, but the teeth nevertheless erupted. In the patient treated with radiation at age 9 for a tumor in the left cheek, bone apposition in the left side of the mandible failed to continue at the same rate as on the right side. Although new megavoltage radiation machines have reduced the chances of bone complications in adults, developing bone and structures are still significantly affected by radiation

  6. Development of Plant Application Technique of Low Dose Radiation

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Byung Yeoup; Kim, Jae Sung; Lim, Yong Taek (and others)

    2007-07-15

    The project was carried out to achieve three aims. First, development of application techniques of cell-stimulating effects by low-dose radiation. Following irradiation with gamma-rays of low doses, beneficial effects in crop germination, early growth, and yield were investigated using various plant species and experimental approaches. For the actual field application, corroborative studies were also carried out with a few concerned experimental stations and farmers. Moreover, we attempted to establish a new technique of cell cultivation for industrial mass-production of shikonin, a medicinal compound from Lithospermum erythrorhizon and thereby suggested new application fields for application techniques of low-dose radiation. Second, elucidation of action mechanisms of ionizing radiation in plants. By investigating changes in plant photosynthesis and physiological metabolism, we attempted to elucidate physiological activity-stimulating effects of low-dose radiation and to search for radiation-adaptive cellular components. Besides, analyses of biochemical and molecular biological mechanisms for stimulus-stimulating effects of low-dose radiation were accomplished by examining genes and proteins inducible by low-dose radiation. Third, development of functional crop plants using radiation-resistant factors. Changes in stress-tolerance of plants against environmental stress factors such as light, temperature, salinity and UV-B stress after exposed to low-dose gamma-rays were investigated. Concerned reactive oxygen species, antioxidative enzymes, and antioxidants were also analyzed to develop high value-added and environment-friendly functional plants using radiation-resistant factors. These researches are important to elucidate biological activities increased by low-dose radiation and help to provide leading technologies for improvement of domestic productivity in agriculture and development of high value-added genetic resources.

  7. Development of Plant Application Technique of Low Dose Radiation

    International Nuclear Information System (INIS)

    Chung, Byung Yeoup; Kim, Jae Sung; Lim, Yong Taek

    2007-07-01

    The project was carried out to achieve three aims. First, development of application techniques of cell-stimulating effects by low-dose radiation. Following irradiation with gamma-rays of low doses, beneficial effects in crop germination, early growth, and yield were investigated using various plant species and experimental approaches. For the actual field application, corroborative studies were also carried out with a few concerned experimental stations and farmers. Moreover, we attempted to establish a new technique of cell cultivation for industrial mass-production of shikonin, a medicinal compound from Lithospermum erythrorhizon and thereby suggested new application fields for application techniques of low-dose radiation. Second, elucidation of action mechanisms of ionizing radiation in plants. By investigating changes in plant photosynthesis and physiological metabolism, we attempted to elucidate physiological activity-stimulating effects of low-dose radiation and to search for radiation-adaptive cellular components. Besides, analyses of biochemical and molecular biological mechanisms for stimulus-stimulating effects of low-dose radiation were accomplished by examining genes and proteins inducible by low-dose radiation. Third, development of functional crop plants using radiation-resistant factors. Changes in stress-tolerance of plants against environmental stress factors such as light, temperature, salinity and UV-B stress after exposed to low-dose gamma-rays were investigated. Concerned reactive oxygen species, antioxidative enzymes, and antioxidants were also analyzed to develop high value-added and environment-friendly functional plants using radiation-resistant factors. These researches are important to elucidate biological activities increased by low-dose radiation and help to provide leading technologies for improvement of domestic productivity in agriculture and development of high value-added genetic resources

  8. Development of CVD diamond radiation detectors

    CERN Document Server

    Adam, W; Berdermann, E; Bogani, F; Borchi, E; Bruzzi, Mara; Colledani, C; Conway, J; Dabrowski, W; Delpierre, P A; Deneuville, A; Dulinski, W; van Eijk, B; Fallou, A; Fisch, D; Foulon, F; Friedl, M; Gan, K K; Gheeraert, E; Grigoriev, E A; Hallewell, G D; Hall-Wilton, R; Han, S; Hartjes, F G; Hrubec, Josef; Husson, D; Kagan, H; Kania, D R; Kaplon, J; Kass, R; Knöpfle, K T; Krammer, Manfred; Manfredi, P F; Meier, D; Mishina, M; Le Normand, F; Pan, L S; Pernegger, H; Pernicka, Manfred; Pirollo, S; Re, V; Riester, J L; Roe, S; Roff, D G; Rudge, A; Schnetzer, S R; Sciortino, S; Speziali, V; Stelzer, H; Stone, R; Tapper, R J; Tesarek, R J; Thomson, G B; Trawick, M L; Trischuk, W; Turchetta, R; Walsh, A M; Wedenig, R; Weilhammer, Peter; Ziock, H J; Zoeller, M M

    1998-01-01

    Diamond is a nearly ideal material for detecting ionizing radiation. Its outstanding radiation hardness, fast charge collection and low leakage current allow a diamond detector to be used in high ra diation, high temperature and in aggressive chemical media. We have constructed charged particle detectors using high quality CVD diamond. Characterization of the diamond samples and various detect ors are presented in terms of collection distance, $d=\\mu E \\tau$, the average distance electron-hole pairs move apart under the influence of an electric field, where $\\mu$ is the sum of carrier mo bilities, $E$ is the applied electric field, and $\\tau$ is the mobility weighted carrier lifetime. Over the last two years the collection distance increased from $\\sim$ 75 $\\mu$m to over 200 $\\mu$ m. With this high quality CVD diamond a series of micro-strip and pixel particle detectors have been constructed. These devices were tested to determine their position resolution and signal to n oise performance. Diamond detectors w...

  9. New developments in radiation protection instrumentation via active electronic methods

    International Nuclear Information System (INIS)

    Umbarger, C.J.

    1981-01-01

    New developments in electronics and radiation detectors are improving on real-time data acquisition of radiation exposure and contamination conditions. Recent developments in low power circuit designs, hybrid and integrated circuits, and microcomputers have all contributed to smaller and lighter radiation detection instruments that are, at the same time, more sensitive and provide more information (e.g., radioisotope identification) than previous devices. New developments in radiation detectors, such as cadmium telluride, gas scintillation proportional counters, and imaging counters (both charged particle and photon) promise higher sensitivities and expanded uses over present instruments. These developments are being applied in such areas as health physics, waste management, environmental monitoring, in vivo measurements, and nuclear safeguards

  10. Fundamental Technology Development for Radiation Damage in Nuclear Materials

    International Nuclear Information System (INIS)

    Kwon, Sang Chul; Kwon, J. H.; Kim, E. S. and others

    2005-04-01

    This project was performed to achieve technologies for the evaluation of radiation effects at materials irradiated at HANARO and nuclear power plants, to establish measurement equipment and software for the analysis of radiation defects and to set up facilities for the measurements of radiation damage with non-destructive methods. Major targets were 1) establishment of hot laboratories and remote handling facilities/ technologies for the radioactive material tests, 2) irradiation test for the simulation of nuclear power plant environment and measurement/calculation of physical radiation damage, 3) evaluation and analysis of nano-scale radiation damage, 4) evaluation of radiation embrittlement with ultrasonic resonance spectrum measurement and electromagnetic measurement and 5) basic research of radiation embrittlement and radiation damage mechanism. Through the performance of 3 years, preliminary basics were established for the application research to evaluation of irradiated materials of present nuclear power plants and GEN-IV systems. Particularly the results of SANS, PAS and TEM analyses were the first output in Korea. And computer simulations of radiation damage were tried for the first time in Korea. The technologies will be developed for the design of GEN-IV material

  11. The development of advanced robotics technology in high radiation environment

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yong Bum; Cho, Jaiwan; Lee, Nam Ho; Choi, Young Soo; Park, Soon Yong; Lee, Jong Min; Park, Jin Suk; Kim, Seung Ho; Kim, Byung Soo; Moon, Byung Soo

    1997-07-01

    In the tele-operation technology using tele-presence in high radiation environment, stereo vision target tracking by centroid method, vergence control of stereo camera by moving vector method, stereo observing system by correlation method, horizontal moving axis stereo camera, and 3 dimensional information acquisition by stereo image is developed. Also, gesture image acquisition by computer vision and construction of virtual environment for remote work in nuclear power plant. In the development of intelligent control and monitoring technology for tele-robot in hazardous environment, the characteristics and principle of robot operation. And, robot end-effector tracking algorithm by centroid method and neural network method are developed for the observation and survey in hazardous environment. 3-dimensional information acquisition algorithm by structured light is developed. In the development of radiation hardened sensor technology, radiation-hardened camera module is designed and tested. And radiation characteristics of electric components is robot system is evaluated. Also 2-dimensional radiation monitoring system is developed. These advanced critical robot technology and telepresence techniques developed in this project can be applied to nozzle-dam installation /removal robot system, can be used to realize unmanned remotelization of nozzle-dam installation / removal task in steam generator of nuclear power plant, which can be contributed for people involved in extremely hazardous high radioactivity area to eliminate their exposure to radiation, enhance their task safety, and raise their working efficiency. (author). 75 refs., 21 tabs., 15 figs.

  12. The development of advanced robotics technology in high radiation environment

    International Nuclear Information System (INIS)

    Lee, Yong Bum; Cho, Jaiwan; Lee, Nam Ho; Choi, Young Soo; Park, Soon Yong; Lee, Jong Min; Park, Jin Suk; Kim, Seung Ho; Kim, Byung Soo; Moon, Byung Soo.

    1997-07-01

    In the tele-operation technology using tele-presence in high radiation environment, stereo vision target tracking by centroid method, vergence control of stereo camera by moving vector method, stereo observing system by correlation method, horizontal moving axis stereo camera, and 3 dimensional information acquisition by stereo image is developed. Also, gesture image acquisition by computer vision and construction of virtual environment for remote work in nuclear power plant. In the development of intelligent control and monitoring technology for tele-robot in hazardous environment, the characteristics and principle of robot operation. And, robot end-effector tracking algorithm by centroid method and neural network method are developed for the observation and survey in hazardous environment. 3-dimensional information acquisition algorithm by structured light is developed. In the development of radiation hardened sensor technology, radiation-hardened camera module is designed and tested. And radiation characteristics of electric components is robot system is evaluated. Also 2-dimensional radiation monitoring system is developed. These advanced critical robot technology and telepresence techniques developed in this project can be applied to nozzle-dam installation /removal robot system, can be used to realize unmanned remotelization of nozzle-dam installation / removal task in steam generator of nuclear power plant, which can be contributed for people involved in extremely hazardous high radioactivity area to eliminate their exposure to radiation, enhance their task safety, and raise their working efficiency. (author). 75 refs., 21 tabs., 15 figs

  13. Radiation induced effects in the developing central nervous system

    International Nuclear Information System (INIS)

    Gisone, P.; Dubner, D.; Michelin, S.C.; Perez, M.R. Del

    1997-01-01

    The embryo and the human foetus are particularly sensitive to ionizing radiation and this sensitivity presents various qualitative and quantitative functional changes during intra-uterine development. Apart from radiation induced carcinogenesis, the most serious consequence of prenatal exposure in human beings is severe mental retardation. The principal data on radiation effects on human beings in the development of the central nervous system come form epidemiological studies carried out in individuals exposed in utero during the atomic explosion at Hiroshima and Nagasaki. These observations demonstrate the existence of a time of maximum radiosensitivity between the weeks 8 and 15 of the gestational period, a period in which the proliferation and neuronal migration takes place. Determination of the characteristics of dose-response relationship and the possible existence of a threshold dose of radiation effects on the development of the central nervous system is relevant to radiation protection against low dose radiation and the establishment of dose limits for occupational exposure and the public. Studies were conducted on the generation of nitrous-oxide and its relation with the production of active species of oxygen in brains of exposed rats in utero exposed to doses of up to 1 Gy during their maximum radiosensitivity. The possible role of the mechanism of radiation induced damage in the development of the central nervous system is discussed

  14. Research and development of radiation utilizations in 1981 at JAERI

    International Nuclear Information System (INIS)

    1981-01-01

    There is the field of radiation utilization such as the application of the effect of radiation on matters and the techniques of measurement and analysis utilizing the properties of radiation, in addition to the use of atomic energy as heat or electric power. The fields of application of radiation utilization are very wide, and are closely related to the health and daily life of people. The Japan Atomic Energy Research Institute has performed the research and development on radiation utilization regarding radiochemistry, the application of irradiation, and the production and industrial utilization of radioisotopes. Also, the research of the radiation resistance of organic materials used for nuclear facilities, the development of organic materials, and the production of tritium have become necessary. In this booklet, the recent results of radiation utilization in the JAERI are summarized. The research and development of ion exchange membranes, organic glasses, the fixation of living body activators and water paints, the techniques of utilizing irradiation, the techniques of radioisotope productions and utilization, and the techniques related to the development of atomic energy are reported. (Kako, I.)

  15. Development of medical application methods using radiation. Radionuclide therapy

    International Nuclear Information System (INIS)

    Choi, Chang Woon; Lim, S. M.; Kim, E.H.; Woo, K. S.; Chung, W. S.; Lim, S. J.; Choi, T. H.; Hong, S. W.; Chung, H. Y.; No, W. C.; Oh, B. H.; Hong, H. J.

    1999-04-01

    In this project, we studied following subjects: 1. development of monoclonal antibodies and radiopharmaceuticals 2. clinical applications of radionuclide therapy 3. radioimmunoguided surgery 4. prevention of restenosis with intracoronary radiation. The results can be applied for the following objectives: 1) radionuclide therapy will be applied in clinical practice to treat the cancer patients or other diseases in multi-center trial. 2) The newly developed monoclonal antibodies and biomolecules can be used in biology, chemistry or other basic life science research. 3) The new methods for the analysis of therapeutic effects, such as dosimetry, and quantitative analysis methods of radioactivity, can be applied in basic research, such as radiation oncology and radiation biology

  16. Development of medical application methods using radiation. Radionuclide therapy

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Chang Woon; Lim, S. M.; Kim, E.H.; Woo, K. S.; Chung, W. S.; Lim, S. J.; Choi, T. H.; Hong, S. W.; Chung, H. Y.; No, W. C. [Korea Atomic Energy Research Institute. Korea Cancer Center Hospital, Seoul, (Korea, Republic of); Oh, B. H. [Seoul National University. Hospital, Seoul (Korea, Republic of); Hong, H. J. [Antibody Engineering Research Unit, Taejon (Korea, Republic of)

    1999-04-01

    In this project, we studied following subjects: 1. development of monoclonal antibodies and radiopharmaceuticals 2. clinical applications of radionuclide therapy 3. radioimmunoguided surgery 4. prevention of restenosis with intracoronary radiation. The results can be applied for the following objectives: (1) radionuclide therapy will be applied in clinical practice to treat the cancer patients or other diseases in multi-center trial. (2) The newly developed monoclonal antibodies and biomolecules can be used in biology, chemistry or other basic life science research. (3) The new methods for the analysis of therapeutic effects, such as dosimetry, and quantitative analysis methods of radioactivity, can be applied in basic research, such as radiation oncology and radiation biology.

  17. Development of radiation hardness components for ITER remote maintenance

    Energy Technology Data Exchange (ETDEWEB)

    Obara, Kenjiro; Kakudate, Satoshi; Oka, Kiyoshi; Ito, Akira [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Yagi, Toshiaki; Morita, Yousuke

    1998-04-01

    In the ITER, in-vessel remote handling is required to assemble and maintain in-vessel components in DT operations. Since in-vessel remote handling systems must operate under intense gamma ray radiation exceeding 30 kGy/h, their components must have sufficiently high radiation hardness to allow maintenance long enough in ITER in-vessel environments. Thus, extensive radiation tests and quality improvement, including optimization of material compositions, have been conducted through the ITER R and D program to develop radiation hardness components that meet radiation doses from 10 to 100 MGy at 10 kGy/h. This paper presents the latest on radiation hardness component development conducted by the Japan Home Team as a contribution to the ITER. The remote handling components tested are categorized for use in robotic or viewing systems, or as common components. Radiation tests have been conducted on commercially available products for screening, on modified products, and on new products to improve the radiation hardness. (author)

  18. Development of radiation hardness components for ITER remote maintenance

    International Nuclear Information System (INIS)

    Obara, Kenjiro; Kakudate, Satoshi; Oka, Kiyoshi; Ito, Akira; Yagi, Toshiaki; Morita, Yousuke

    1998-01-01

    In the ITER, in-vessel remote handling is required to assemble and maintain in-vessel components in DT operations. Since in-vessel remote handling systems must operate under intense gamma ray radiation exceeding 30 kGy/h, their components must have sufficiently high radiation hardness to allow maintenance long enough in ITER in-vessel environments. Thus, extensive radiation tests and quality improvement, including optimization of material compositions, have been conducted through the ITER R and D program to develop radiation hardness components that meet radiation doses from 10 to 100 MGy at 10 kGy/h. This paper presents the latest on radiation hardness component development conducted by the Japan Home Team as a contribution to the ITER. The remote handling components tested are categorized for use in robotic or viewing systems, or as common components. Radiation tests have been conducted on commercially available products for screening, on modified products, and on new products to improve the radiation hardness. (author)

  19. Development of modulators against degenerative aging using radiation fusion technology

    Energy Technology Data Exchange (ETDEWEB)

    Jo, S. K.; Park, H. R.; Jang, B. S.; Roh, C. H.; Eom, H. S.; Choi, N. H.; Seol, M. A.; Kim, S. H.; Choi, H. M.; Park, M. K.; Shin, H. J.; Ryu, D. K.; Oh, W. J.; Kim, S. H; Yee, S. T.

    2012-04-15

    1. Objectives Establishment of modelling of degenerative aging using radiation technology Development of aging modulators using radiation degenerative aging model 2. Project results Establishment of the modeling of degenerative aging using radiation technology - The systematic study on the comparison of radiation-induced degeneration and natural aging process in animals and cells confirmed the biological similarity between these two degeneration models - The effective biomarkers were selected for the modelling of degenerative aging using radiation (10 biomarkers for immune/hematopoiesis, 1 for oxidative stress, 6 for molecular signaling, 3 for lipid metabolism) - The optimal irradiation condition was established for the modelling of degerative aging (total 5Gy with fractionation by over 10 times, lapse of over 4 months) - The molecular mechanisms of radiation-induced degeneration were studied including chronic inflammation (lung), inflammation-related lipid metabolism disturbance, mitochondria biogenesis and dynamics - The radiation degenerative model was evaluated with previously known natural substances (resveratrol, EGCG, etc) Development of aging modulators using radiation degenerative aging model - After the screening of about 800 natural herb extracts, 5 effective substances were selected for aging modulation. - 3 candidate compositions were selected from 20 compositions made from effective substances by in vitro evaluation (WAH2, WAH6, WAH7) - 1 composition (WAH6) was selected as the best aging modulator by in vivo evaluation in radiation-induced aging models and degenerative disease models. 3. Expected benefits and plan of application The modelling of degenerative aging using radiation can facilitate the aging research by providing the useful cell/animal models for aging research A large economic benefits are expected by the commercialization of developed aging modulators (over 10 billion KW in 2015.

  20. Development of modulators against degenerative aging using radiation fusion technology

    International Nuclear Information System (INIS)

    Jo, S. K.; Park, H. R.; Jang, B. S.; Roh, C. H.; Eom, H. S.; Choi, N. H.; Seol, M. A.; Kim, S. H.; Choi, H. M.; Park, M. K.; Shin, H. J.; Ryu, D. K.; Oh, W. J.; Kim, S. H; Yee, S. T.

    2012-04-01

    1. Objectives Establishment of modelling of degenerative aging using radiation technology Development of aging modulators using radiation degenerative aging model 2. Project results Establishment of the modeling of degenerative aging using radiation technology - The systematic study on the comparison of radiation-induced degeneration and natural aging process in animals and cells confirmed the biological similarity between these two degeneration models - The effective biomarkers were selected for the modelling of degenerative aging using radiation (10 biomarkers for immune/hematopoiesis, 1 for oxidative stress, 6 for molecular signaling, 3 for lipid metabolism) - The optimal irradiation condition was established for the modelling of degerative aging (total 5Gy with fractionation by over 10 times, lapse of over 4 months) - The molecular mechanisms of radiation-induced degeneration were studied including chronic inflammation (lung), inflammation-related lipid metabolism disturbance, mitochondria biogenesis and dynamics - The radiation degenerative model was evaluated with previously known natural substances (resveratrol, EGCG, etc) Development of aging modulators using radiation degenerative aging model - After the screening of about 800 natural herb extracts, 5 effective substances were selected for aging modulation. - 3 candidate compositions were selected from 20 compositions made from effective substances by in vitro evaluation (WAH2, WAH6, WAH7) - 1 composition (WAH6) was selected as the best aging modulator by in vivo evaluation in radiation-induced aging models and degenerative disease models. 3. Expected benefits and plan of application The modelling of degenerative aging using radiation can facilitate the aging research by providing the useful cell/animal models for aging research A large economic benefits are expected by the commercialization of developed aging modulators (over 10 billion KW in 2015

  1. Development of Quantum Devices and Algorithms for Radiation Detection and Radiation Signal Processing

    International Nuclear Information System (INIS)

    El Tokhy, M.E.S.M.E.S.

    2012-01-01

    The main functions of spectroscopy system are signal detection, filtering and amplification, pileup detection and recovery, dead time correction, amplitude analysis and energy spectrum analysis. Safeguards isotopic measurements require the best spectrometer systems with excellent resolution, stability, efficiency and throughput. However, the resolution and throughput, which depend mainly on the detector, amplifier and the analog-to-digital converter (ADC), can still be improved. These modules have been in continuous development and improvement. For this reason we are interested with both the development of quantum detectors and efficient algorithms of the digital processing measurement. Therefore, the main objective of this thesis is concentrated on both 1. Study quantum dot (QD) devices behaviors under gamma radiation 2. Development of efficient algorithms for handling problems of gamma-ray spectroscopy For gamma radiation detection, a detailed study of nanotechnology QD sources and infrared photodetectors (QDIP) for gamma radiation detection is introduced. There are two different types of quantum scintillator detectors, which dominate the area of ionizing radiation measurements. These detectors are QD scintillator detectors and QDIP scintillator detectors. By comparison with traditional systems, quantum systems have less mass, require less volume, and consume less power. These factors are increasing the need for efficient detector for gamma-ray applications such as gamma-ray spectroscopy. Consequently, the nanocomposite materials based on semiconductor quantum dots has potential for radiation detection via scintillation was demonstrated in the literature. Therefore, this thesis presents a theoretical analysis for the characteristics of QD sources and infrared photodetectors (QDIPs). A model of QD sources under incident gamma radiation detection is developed. A novel methodology is introduced to characterize the effect of gamma radiation on QD devices. The rate

  2. Development of public health assurance technology by radiation

    International Nuclear Information System (INIS)

    Kim, Dong Ho; Lim, Sang Yong; Yang, Jae Seung

    2007-07-01

    This project was performed to develop the radiation sterilization process of public health products and RT/BT fusion technology and to secure a detection and quarantine system of irradiated food. To establish the radiation sterilization of public health goods, current status of radiation sterilization of disposable medical equipment was investigated and the manufacturing process of disposable media for microbial cultivation were developed using a gamma sterilization. In addition, microbial contamination of disposable kitchen utensils was surveyed and pathogen-free organic compost was developed by radiation sterilization. The radiation responses of bacteria including Salmonella, Vibrio, E. coli, and D. radiodurans were analyzed by DNA chip and 2-D electrophoresis. To validate the safety of surviving bacteria after irradiation, the expressions of virulence genes of pathogenic bacteria were monitored using real-time PCR, and the growth of mycotoxin-producing funguses was studied after irradiation. And also, quantitative detection methods of irradiated and inactivated Salmonella using a real-time PCR and a immuno assay. To establish the quarantine and quality assurance of irradiated food and public health products, radiation technology was applied to the fermented foods, minimally processed food and dried vegetables. Radiation effects on insects was examined and the corresponding data base was constructed. We also collaborated on the preliminary test of international trade of sea food with USA or India. To establish the official detection method of irradiated food, physical, chemical and biological detection methods for irradiated food were verified. Finally, multiple range test of irradiated food was performed

  3. Research and development of radiation utilization in 1986 at JAERI

    International Nuclear Information System (INIS)

    1986-01-01

    In the peaceful utilization of atomic energy, in addition to the method of utilizing the energy obtained by nuclear fission and nuclear fusion as electric power or heat source, there is the field of utilizing radiation, in which the effect that radiation exerts on substances and the properties of radiation are used for measurement, analysis and others. The fields of utilizing radiation are diverse such as medicine, technology and agriculture, and those directly related to the health and daily life of people are many. Japan Atomic Energy Research Institute has positively advanced the research and development on radiation utilization, which are related to the utilization of irradiation and the production and use of radioisotopes. The former is carried out in Takasaki Radiation Chemistry Research Establishment, and the latter in the Isotope Division, Tokai Research Establishment. Also, the research and development on the radiation-withstanding properties of organic materials and the production techniques for tritium are advanced, and it is expected to begin the highly advanced scientific and technological research using ion beam. The research and development of polymer materials, the techniques of using irradiation, the production and utilization of radioisotopes and others are reported. (Kako, I.)

  4. Development, validation and routine control of a radiation process

    International Nuclear Information System (INIS)

    Kishor Mehta

    2010-01-01

    Today, radiation is used in industrial processing for variety of applications; from low doses for blood irradiation to very high doses for materials modification and even higher for gemstone colour enhancement. At present, radiation is mainly provided by either radionuclides or machine sources; cobalt-60 is the most predominant radionuclide in use. Currently, there are several hundred irradiation facilities worldwide. Similar to other industries, quality management systems can assist radiation processing facilities in enhancing customer satisfaction and maintaining and improving product quality. To help fulfill quality management requirements, several national and international organizations have developed various standards related to radiation processing. They all have requirements and guidelines for development, validation and routine control of the radiation process. For radiation processing, these three phases involve the following activities. Development phase includes selecting the type of radiation source, irradiation facility and the dose required for the process. Validation phase includes conducting activities that give assurance that the process will be successful. Routine control then involves activities that provide evidence that the process has been successfully realized. These standards require documentary evidence that process validation and process control have been followed. Dosimetry information gathered during these processes provides this evidence. (authors)

  5. Development of public health assurance technology by radiation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dong Ho; Lim, Sang Yong; Yang, Jae Seung (and others)

    2007-07-15

    This project was performed to develop the radiation sterilization process of public health products and RT/BT fusion technology and to secure a detection and quarantine system of irradiated food. To establish the radiation sterilization of public health goods, current status of radiation sterilization of disposable medical equipment was investigated and the manufacturing process of disposable media for microbial cultivation were developed using a gamma sterilization. In addition, microbial contamination of disposable kitchen utensils was surveyed and pathogen-free organic compost was developed by radiation sterilization. The radiation responses of bacteria including Salmonella, Vibrio, E. coli, and D. radiodurans were analyzed by DNA chip and 2-D electrophoresis. To validate the safety of surviving bacteria after irradiation, the expressions of virulence genes of pathogenic bacteria were monitored using real-time PCR, and the growth of mycotoxin-producing funguses was studied after irradiation. And also, quantitative detection methods of irradiated and inactivated Salmonella using a real-time PCR and a immuno assay. To establish the quarantine and quality assurance of irradiated food and public health products, radiation technology was applied to the fermented foods, minimally processed food and dried vegetables. Radiation effects on insects was examined and the corresponding data base was constructed. We also collaborated on the preliminary test of international trade of sea food with USA or India. To establish the official detection method of irradiated food, physical, chemical and biological detection methods for irradiated food were verified. Finally, multiple range test of irradiated food was performed.

  6. Development of lightweight radiators for lunar based power systems

    International Nuclear Information System (INIS)

    Juhasz, A.J.; Bloomfield, H.S.

    1994-05-01

    This report discusses application of a new lightweight carbon-carbon (C-C) space radiator technology developed under the NASA Civil-Space Technology Initiative (CSTI) High Capacity Power Program to a 20 kWe lunar based power system. This system comprises a nuclear (SP-100 derivative) heat source, a Closed Brayton Cycle (CBC) power conversion unit with heat rejection by means of a plane radiator. The new radiator concept is based on a C-C composite heat pipe with integrally woven fins and a thin walled metallic liner for containment of the working fluid. Using measured areal specific mass values (1.5 kg/m2) for flat plate radiators, comparative CBC power system mass and performance calculations show significant advantages if conventional heat pipes for space radiators are replaced by the new C-C heat pipe technology

  7. Development of Computer Program for Analysis of Irregular Non Homogenous Radiation Shielding

    International Nuclear Information System (INIS)

    Bang Rozali; Nina Kusumah; Hendro Tjahjono; Darlis

    2003-01-01

    A computer program for radiation shielding analysis has been developed to obtain radiation attenuation calculation in non-homogenous radiation shielding and irregular geometry. By determining radiation source strength, geometrical shape of radiation source, location, dimension and geometrical shape of radiation shielding, radiation level of a point at certain position from radiation source can be calculated. By using a computer program, calculation result of radiation distribution analysis can be obtained for some analytical points simultaneously. (author)

  8. Proceedings of the recent developments in radiation dosimetry

    International Nuclear Information System (INIS)

    Bhat, Nagesh; Palani Selvan, T.

    2016-01-01

    Whilst 'Dosimetry' in its original sense deals with methods for a quantitative determination of energy deposited in a given medium by directly or indirectly ionizing radiations, the term is better known as a scientific sub-specialty in the fields of health physics and medical physics, where it is the calculation and assessment of the radiation dose received by the human body. Dosimetry is used extensively for radiation protection and is routinely applied to ensure radiological safety of occupational radiation workers. Internal dosimetry due to the ingestion or inhalation of radioactive materials relies on a variety of physiological or imaging techniques. External dosimetry, due to irradiation from an external source is based on measurements with a dosimeter, or inferred from other radiological protection instruments. Radiation dosimetry is one of the important research areas of Department of Atomic Energy (DAE). This research work is centered on the facilities such as nuclear reactors, reprocessing plants, high energy accelerators (research/industry/medical), radiation standards, food processing, radiation technology development, etc. In each of these facilities, radiation field environment is different and the associated dosimetry concepts are different. Papers relevant to INIS are indexed separately

  9. Advances on radiation protection dosimetry research, development and services at AEOI

    International Nuclear Information System (INIS)

    Sohrabi, M.

    1993-01-01

    Radiation dosimetry is the main counterpart of an effective national radiation protection program to protect radiation workers, public and the environment against harmful effects of radiation. Research and development on radiation dosimetry are of vital needs to support national dosimetry services. The National Radiation Protection Department (NRPD) of the Atomic Energy Organization of Iran (AEOI) being a National Authority on radiation protection is also responsible for radiation dosimetry research, development and services. Some highlights of such activities at NRPD are reviewed and discussed

  10. Critical Issues in Radiation Protection Knowledge Management for Preserving Radiation Protection Research and Development Capabilities.

    Science.gov (United States)

    Dewji, Shaheen Azim

    2017-02-01

    As a hub of domestic radiation protection capabilities, Oak Ridge National Laboratory's Center for Radiation Protection Knowledge has a mandate to develop and actuate a formal knowledge management (KM) effort. This KM approach exceeds recruitment and training efforts but focuses on formalized strategies for knowledge transfer from outgoing subject matter experts in radiation protection to incoming generations. It is envisioned that such an effort will provide one avenue for preserving domestic capabilities to support stakeholder needs in the federal government and the nuclear industry while continuing to lead and innovate in research and development on a global scale. However, in the absence of broader coordination within the United States, preservation of radiation protection knowledge continues to be in jeopardy in the absence of a dedicated KM effort.

  11. Critical issues in radiation protection knowledge management for preserving radiation protection research and development capabilities

    International Nuclear Information System (INIS)

    Dewji, Shaheen Azim

    2017-01-01

    As a hub of domestic radiation protection capabilities, Oak Ridge National Laboratory’s Center for Radiation Protection Knowledge has a mandate to develop and actuate a formal knowledge management (KM) effort. This KM approach exceeds recruitment and training efforts but focuses on formalized strategies for knowledge transfer from outgoing subject matter experts in radiation protection to incoming generations. It is envisioned that such an effort will provide one avenue for preserving domestic capabilities to support stakeholder needs in the federal government and the nuclear industry while continuing to lead and innovate in research and development on a global scale. Furthermore, in the absence of broader coordination within the United States, preservation of radiation protection knowledge continues to be in jeopardy in the absence of a dedicated KM effort.

  12. Development Of Data Acquisition Software For Centralized Radiation Monitoring System

    International Nuclear Information System (INIS)

    Nolida Yussup; Maslina Mohd Ibrahim; Mohd Fauzi Haris; Syirrazie Che Soh; Harzawardi Hasim; Azraf Azman; Mohd Ashhar Khalid

    2014-01-01

    Nowadays, with the growth of technology, many devices and equipment's can be connected to the network and internet to enable online data acquisition. Centralized radiation monitoring system utilizes a Local Area Network (LAN) as a communication media for data acquisition of the area radiation levels from radiation detectors in Malaysian Nuclear Agency (Nuclear Malaysia). The development of the system involves device configuration, wiring, network and hardware installation, software and web development. This paper describes the software development on the system server that is responsible to acquire and record the area radiation readings from the detectors. Then the recorded readings are called in a web programming to be displayed on a web site. The readings with the time stamp are stored in the system database for query. Besides acquiring the area radiation levels in Nuclear Malaysia centrally, additional features such as data conversion from mR to μSv and line chart display are developed in the software for effective radiation level trend observation and studies. (author)

  13. Development and application of the basic principles of radiation protection

    International Nuclear Information System (INIS)

    Huyskens, C.J.

    1986-01-01

    The basic philosophy of radiation protection, i.e. to prevent non-stochastic effects and to reduce stochastic effects to an acceptable level, is realized in the internationally accepted three-stage system of dose reduction, viz. justification, ALARA and dose limits. Historical development of this three-stage system is described and the three components are worked out further. The application and applicability of the system is considered for radiation sources and accidents. Attention is also given to regulations, national policy and practice of radiation protection. (G.J.P.)

  14. The development of radiation protection regulations in Malaysia

    International Nuclear Information System (INIS)

    Yusoff Ismail

    1995-01-01

    The paper begins by mentioning the established policy of the Government of Malaysia vis-a-vis protection against ionizing radiations as embodied in the Radioactive Substances Act 1968 and, later, the atomic Energy Licensing Act 1984. Then it turns to on the major events that influences the past, the present and the future development of the radiation protection regulations in Malaysia. it concludes with a vision where future Malaysia is seen drifting towards a consensus effort in radiation protection rendering self regulation the order of the day. (author)

  15. Development of advanced, non-toxic, synthetic radiation shielding aggregate

    Energy Technology Data Exchange (ETDEWEB)

    Mudgal, Manish; Chouhan, Ramesh Kumar; Verma, Sarika; Amritphale, Sudhir Sitaram; Das, Satyabrata [CSIR-Advanced Materials and Processes Research Institute, Bhopal (India); Shrivastva, Arvind [Nuclear Power Corporation of India Ltd. (NPCIL), Mumbai (India)

    2018-04-01

    For the first time in the world, the capability of red mud waste has been explored for the development of advanced synthetic radiation shielding aggregate. Red mud, an aluminium industry waste consists of multi component, multi elemental characteristics. In this study, red mud from two different sources have been utilized. Chemical formulation and mineralogical designing of the red mud has been done by ceramic processing using appropriate reducing agent and additives. The chemical analysis, SEM microphotographs and XRD analysis confirms the presence of multi-component, multi shielding and multi-layered phases in both the different developed advance synthetic radiation shielding aggregate. The mechanical properties, namely aggregate impact value, aggregate crushing value and aggregate abrasion value have also been evaluated and was compared with hematite ore aggregate and found to be an excellent material useful for making advanced radiation shielding concrete for the construction of nuclear power plants and other radiation installations.

  16. Design and Development of transducer for IR radiation measurement

    International Nuclear Information System (INIS)

    Pattarachindanuwong, Surat; Poopat, Bovornchoke; Meethong, Wachira

    2003-06-01

    Recently, IR radiation has many important roles such as for plastics industry, food industry and medical instrumentation. The consequence of exposed irradiation objects from IR can be greatly affected by the quantity of IR radiation. Therefore the objectively this research is to design and develop a transducer for IR radiation measurement. By using a quartz halogen lamp as a IR heat source of IR radiation and a thermopile sensor as a transducer. The thermal conductivity of transducer and air flow, were also considered for design and development of transducer. The study shows that the designed transducer can be used and applied in high temperature process, for example, the quality control of welding, the non-contact temperature measurement of drying oven and the testing of IR source in medical therapy device

  17. UV and EB radiation processing in developing countries

    International Nuclear Information System (INIS)

    Garnett, J.L.

    1991-01-01

    Ultraviolet and electron beams (EB) are to be considered as complementary technologies in the radiation processing field. In many countries, UV processing is used as the pathfinder for EB. In the developing countries the decision to adopt radiation processing techniques to choose between UV and EB will largely be determined by economics, the availability of the chemists and also skilled personnel to service both lines and equipment. (orig./A.B.)

  18. Epidemiology of cancer due to radiations and development of guidelines

    International Nuclear Information System (INIS)

    Okuno, Emico

    2009-01-01

    This review article describes the ionizing and non-ionizing radiation protection commissions and the development processes of the guidelines for limiting exposure to these radiations. We briefly describe the history of these commissions and the types of epidemiological studies from which the risk factors are evaluated. Some recent results obtained from epidemiological studies of atomic bomb survivors in Japan and the inherent difficulties will be presented. At last the current international recommendations will be presented. (author)

  19. Radiation risks to the developing nervous system

    International Nuclear Information System (INIS)

    1985-01-01

    The present abstract book contains the abstracts of 23 papers presented at the meeting. They are dealing with the effect of pre- or postnatal irradiation on the brain morphology metabolism or development studied in mice, rats or rabbits. (MG)

  20. Transfer of radiation technology to developing countries

    Science.gov (United States)

    Markovic, Vitomir; Ridwan, Mohammad

    1993-10-01

    Transfer of technology is a complex process with many facets, options and constraints. While the concept is an important step in bringing industrialization process to agricultural based countries, it is clear, however, that a country will only benefit from a new technology if it addresses a real need, and if it can be absorbed and adapted to suit the existing cultural and technological base. International Atomic Energy Agency, as UN body, has a mandate to promote nuclear applicationsand assist Member States in transfer of technology for peaceful applications. This mandate has been pursued by many different mechanisms developed in the past years: technical assistance, coordinated research programmes, scientific and technical meetings, publications, etc. In all these activities the Agency is the organizer and initiator, but main contributions come from expert services from developed countries and, increasingly, from developing countries themselves. The technical cooperation among developing coutries more and more becomes part of different programmes. In particular, regional cooperation has been demonstrated as an effective instrument for transfer of technology from developed and among developing countries. Some examples of actual programmes are given.

  1. Precision machining and polishing of scintillating crystals for large calorimeters and hodoscopes

    International Nuclear Information System (INIS)

    Wuest, C.R.; Fuchs, B.A.; Holdener, F.R.; Heck, J.L. Jr.

    1994-04-01

    New machining and polishing techniques have been developed for large scintillating crystal arrays such as the Barium Fluoride Electromagnetic Calorimeter for the GEM Detector at SSCL, the Crystal Clear Collaboration's cerium fluoride or lead tungstenate calorimeter at the proposed LHC and CERN, the PHENIX Detector at RHIC (barium fluoride), and the cesium iodide Calorimeter for the BaBar Detector at PEP-2 B Factory at SLAC. The machining and polishing methods to be presented in this paper provide crystalline surfaces without sub-surface damage or deformation as verified by Rutherford Back-scattering (RBS) analysis. Surface roughness of about 10--20 angstroms and sub-micron mechanical tolerances have been demonstrated on large barium fluoride crystal samples. Mass production techniques have also been developed for machining the proper angled surfaces and polishing up to five 50 cm long crystals at one time. These techniques utilize kinematic mount technology developed at LLNL to allow precision machining and polishing of complex surfaces. They will present this technology along with detailed surface studies of barium fluoride and cerium fluoride crystals polished with this technique

  2. Ionizing radiation from Chernobyl affects development of wild carrot plants

    Science.gov (United States)

    Boratyński, Zbyszek; Arias, Javi Miranda; Garcia, Cristina; Mappes, Tapio; Mousseau, Timothy A.; Møller, Anders P.; Pajares, Antonio Jesús Muñoz; Piwczyński, Marcin; Tukalenko, Eugene

    2016-12-01

    Radioactivity released from disasters like Chernobyl and Fukushima is a global hazard and a threat to exposed biota. To minimize the deleterious effects of stressors organisms adopt various strategies. Plants, for example, may delay germination or stay dormant during stressful periods. However, an intense stress may halt germination or heavily affect various developmental stages and select for life history changes. Here, we test for the consequence of exposure to ionizing radiation on plant development. We conducted a common garden experiment in an uncontaminated greenhouse using 660 seeds originating from 33 wild carrots (Daucus carota) collected near the Chernobyl nuclear power plant. These maternal plants had been exposed to radiation levels that varied by three orders of magnitude. We found strong negative effects of elevated radiation on the timing and rates of seed germination. In addition, later stages of development and the timing of emergence of consecutive leaves were delayed by exposure to radiation. We hypothesize that low quality of resources stored in seeds, damaged DNA, or both, delayed development and halted germination of seeds from plants exposed to elevated levels of ionizing radiation. We propose that high levels of spatial heterogeneity in background radiation may hamper adaptive life history responses.

  3. Development of radiation indicator plants by molecular breeding

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Jang-Ryol; Min, Sung-Ran; Jeong, Won-Joong; Kwak, Sang-Soo; Lee, Haeng-Soon; Kwon, Seok-Yoon; Pai, Hyun-Sook; Cho, Hye-Sun; In, Dong-Su; Oh, Seung-Chol; Park, Sang- Gyu; Woo, Je-Wook; Kin, Tae-Hwan; Park, Ju-Hyun; Kim, Chang-Sook [Korea Research Institute of Bioscience and Biotechnology, Taejeon (Korea)

    2001-04-01

    To develop the transgenic plants with low level of antioxidant enzyme, transgenic tobacco plants (157 plants) using 8 different plant expression vectors which have APX genes in sense or antisense orientation under the control of CaMV 35S promoter or stress-inducible SWPA2 promoter were developed. The insertion of transgene in transgenic plants was confirmed by PCR analysis. The total APX activities of transgenic plants were enhanced or reduced by introduction of APX gene in plants. To clone the radiation-responsive genes and their promoter from plants, the NeIF2Bb, one of radiation-responsive genes from tobacco plant was characterized using molecular and cell biological tools. Promoter of GST6, a radiation-responsive gene, was cloned using RT-PCR. The GST6 promoter sequence was analyzed, and known sequence motif was searched. To develop the remediation technology of radioactively contaminated soil using transgenic plants uranium reductase and radiation resistance genes have been introduced in tobacco and indian mustard plans. The uranium reductase and radiation resistance (RecA) genes were confirmed in transgenic tobacco and indian mustard plants by PCR analysis. Also, Gene expression of uranium reductase and radiation resistance were confirmed in transgenic indian mustard plants by northern blot analysis. 42 refs., 12 figs. (Author)

  4. Development of radiation hard components for remote maintenance

    International Nuclear Information System (INIS)

    Oka, Kiyoshi; Obara, Kenjiro; Kakudate, Satoshi; Tominaga, Ryuichiro; Akada, Tamio; Morita, Hirosuke.

    1997-01-01

    In International Thermonuclear Experimental Reactor (ITER), in-vessel remote-handling is inevitably required to assemble and maintain activated in-vessel components due to D-T operation. The components of the in-vessel remote-handling system must have sufficient radiation hardness to allow for operation under an intense gamma-ray radiation of over 30 kGy/h for periods up to more than 1,000 hours. To this end, extensive irradiation tests and quality improvements including the optimization of material composition have been conducted through the ITER R and D program in order to develop radiation hard components which satisfy radiation doses from 10 MGy to 100 MGy at the dose rate of 10 kGy/h. This paper outlines the latest status of the radiation hard component development that has been conducted as the Japan Home Team's contribution to ITER. The remote-handling components tested are categorized into either robotics, viewing systems or common components. The irradiation tests include commercial base products for screening both modified and newly developed products to improve their radiation hardness. (author)

  5. Problems of radiation therapy in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Lyimo, R; Neumeister, K

    1988-01-01

    Poverty as well as lack of proper cancer programmes has prevented the early detection of cancer in developing countries. Radiotherapy is applied mostly in advanced cases only. To change the situation comprehensive programmes must be introduced with particular attention to the importance of cancer control. The establishment of cancer societies as well as the introduction of centres for training of radiological personnel will really improve the situation. A realistic method for the optimization of radiotherapy in developing countries should be the use of radiomodification such as hypoxyradiotherapy.

  6. Development of radiation utilization for economic growth in China

    International Nuclear Information System (INIS)

    Lu Yanxiao

    1994-01-01

    The program of radiation utilization in China was initiated with the development of nuclear industry in the late 1950s. From then on, the establishment of relatively comprehensive nuclear industrial system and a fair number of talent technical personnel have laid the foundation for radiation utilization in industry, agriculture, medicine and so on. Radioisotopes and radiation become one of the most effective means for acquiring data and information and changing material properties in modern techniques. They are, in many respects, unique and cannot replaced by other techniques. In recent years the considerable progress in the development, commercialization and large-scale utilization of radioisotopes and radiation has been creating economic and social benefits for Chinese modernization. The applications in agriculture have mainly embodied in mutation breeding of crops and so on through radiation or in combination with other methods to provide excellent mutant varieties. The important applications in medicine are the medical diagnosis with radioimmunoassay (RIA) and radiopharmaceutical imaging, and cancer therapy with radioisotopes and electron beam. Well-established methods have bee offered for routine clinic applications to help to heal the patients and rescue the lives. The industrial applications are of key importance in economic growth in China. In fact, radiation processing and nucleonic control systems (NCS) for industrial utilization are very useful to technological transformation of Chinese traditional industries. The radiation utilization in industries can be emerging as new high-tech industries. A fuller exploitation of radiation utilization is expected to meet the requirements of high growth of national economy and to bridge the gap between China and the developed countries in the world in nuclear application. (author)

  7. Technology development for evaluation of operational quantities in radiation protection

    International Nuclear Information System (INIS)

    Jang, Si Young; Lee, T. Y.; Kim, B. H.

    2003-03-01

    Korean government recently published a national regulation on the internal exposure monitoring and dose evaluation (internal dosimetry) based on the most recent ICRP recommendation 60 and subsequent publications, which supercede the former ICRP recommendation 26 and publication 30, on which the internal dosimetry practice in Korea had been based so far. Consequently, this project, according to the demand from both government and nuclear industry, had been launched to develop a user-friendly computer code on internal dosimetry adopting the most up to date ICRP biokinetic and dosimetric model to resolve the difficulties and problems faced to nuclear industry and to develop related technology. The reliability of this code, named as BiDAS, as a result of several benchmark calculations for self assurance appeared to be excellent comparing with the foreign computer code. This computer code is expected to be successfully utilized in nuclear industry and related fields in complying with the national regulation on internal dosimetry program started from late 2003. Reference low level gamma(γ) radiation field for calibration of environmental radiation(γ) monitor and reference neutron field for calibration of n monitoring equipment have been established and characterized. International cross comparison of these reference radiation fields have been performed and radiation response of various radiation monitoring instrument has been tested by using these reference radiation fields. A technology which can directly measure the radiation quality factor and tissue absorbed dose has been established to evaluate the neutron dose in terms of operational quantity in the unknown mixed n-γ radiation field. Spherical and cylindrical TEPC systems have been designed and manufactured and a portable TEPC system to measure the neutron quality and dose in the real work field has been developed and tested in accelerator laboratory

  8. Development of radiation utilization for economic growth in China

    Energy Technology Data Exchange (ETDEWEB)

    Yanxiao, Lu [China Nuclear Information Center, Beijing, BJ (China)

    1994-01-01

    The program of radiation utilization in China was initiated with the development of nuclear industry in the late 1950s. From then on, the establishment of relatively comprehensive nuclear industrial system and a fair number of talent technical personnel have laid the foundation for radiation utilization in industry, agriculture, medicine and so on. Radioisotopes and radiation become one of the most effective means for acquiring data and information and changing material properties in modern techniques. They are, in many respects, unique and cannot replaced by other techniques. In recent years the considerable progress in the development, commercialization and large-scale utilization of radioisotopes and radiation has been creating economic and social benefits for Chinese modernization. The applications in agriculture have mainly embodied in mutation breeding of crops and so on through radiation or in combination with other methods to provide excellent mutant varieties. The important applications in medicine are the medical diagnosis with radioimmunoassay (RIA) and radiopharmaceutical imaging, and cancer therapy with radioisotopes and electron beam. Well-established methods have bee offered for routine clinic applications to help to heal the patients and rescue the lives. The industrial applications are of key importance in economic growth in China. In fact, radiation processing and nucleonic control systems (NCS) for industrial utilization are very useful to technological transformation of Chinese traditional industries. The radiation utilization in industries can be emerging as new high-tech industries. A fuller exploitation of radiation utilization is expected to meet the requirements of high growth of national economy and to bridge the gap between China and the developed countries in the world in nuclear application. (author).

  9. A research on industrial development of radiation sterilization in Sichuan

    International Nuclear Information System (INIS)

    Chen Xun; Zhu Rong; Chen Jigang

    2010-01-01

    Radiation sterilization is widely applied in food processing, Pharmaceutical Manufacturing and medical instrumentation producing. As this industry offers service to related corporations, its development depends largely on the market scale of the relevant industries. This article mainly discusses the balance point between the capacity of radiation sterilization and the requirement of its market. There are less than 1% of the companies in Sichuan which using radiation sterilization for its products, broad prospects has shown in this field. The output value of radiation sterilization industry reached 0.1% of the GDP in some advanced countries (America and Japan...), under this standard, its output value in Sichuan province would be RMB1.2 hundred million, but now our capacity and scale of this industry is less than RMB40million.Research shows: there are 3 key points to make its output value reach 0.1% of the GDP in Sichuan: 1. Breaking the 'bottleneck' restrictions of capacity and Inappropriate resources distribution. 2. Promoting the technique of radiation sterilization, guiding corporation to reduce their dependence on food additive from the perspective of food safety, make effective implantation of radiation sterilization into their manufacture processes. 3. Increasing publicity for radiation sterilization, eliminating scared mentality among customer on nuclear technology, helping manufacturing corporations to establish green environmental protection brand, directing our customer to a more healthy awareness. (authors)

  10. The new development of radiation processing in China

    International Nuclear Information System (INIS)

    Chen Dianhua

    1998-12-01

    China Isotope and Radiation Association (CIRA) investigated the status of radiation processing in China's mainland. There are 45 accelerators each with beam power over 5 kW, the total beam power is 2005 kW. There are 48 γ facilities each with designed capacity over 1.11 x 10 4 TBq (0.3 million curies) and other 75 units with designed capacity less than 1.11 x 10 4 TBq. The total loaded capacity is 4.63 x 10 5 TBq, more than one third of the designed capacity. radiation processing is mainly used in producing chemical-industrial products (as heat-shrinkable products and radiation cross-linked wire and cable) in China. Some enterprises with annual output value over a hundred million RMB have emerged. Radiation processing is also used in preservation and disinfection of food. In 1977, six kinds of hygienic standards for irradiated food were authorized. Radiation sterilization of disposable medical products, radiation desulphurization and denitration are also being developed in China

  11. A study on the radiation and environmental safety -Development of radiation protection and measurement technology-

    Energy Technology Data Exchange (ETDEWEB)

    Jang, See Yung; Lee, Tae Yung; Lee, Hyung Sub; Kim, Jan Ryul; Kim, Chang Kyung; Kim, Bong Hwan; Yoon, Kyung Soo; Jung, Kyung Kee; Jung, Duk Yun; Lee, Bong Jae; Chul, Yoon Suk; Lee, Kee Chang; Yoon, Yu Chang; Jung, Rae Ik; Lee, Sang Yoon; Han, Yung Dae; Kim, Jong Soo, I; Kim, Jong Soo, II; Suh, Kyung Won [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Kim, Jong Kyung [Han Yang Univ., Seoul (Korea, Republic of)

    1995-07-01

    Reference X- and neutron radiation fields have been established and evaluated to support the national radiation protection programme under which performance evaluation test for domestic personal dosimetry will be implemented by the ministerial ordinance 1992-15, and to provide a basic technical support in radiation protection dosimetry. Personal dose evaluation algorithm has been developed with the KAERI reference radiation fields which comply well with those in the new ANSI N13.11(1993) to evaluate accurate personal dose equivalents. A personal internal dosimetry algorithm which can estimate the intakes of radionuclides from the results of whole body direct bioassay and the resulting internal doses has been also developed and evaluated to be equally excellent compared with those being used in foreign countries. A BOMAB phantom for precise WBC calibration has also designed, fabricated and test-evaluated. A principal method for estimating the cost for radiation protection which is important in performing a cost-benefit analysis for the radiation protection optimization study based on the ALARA principle has been preliminarily investigated and suggested. 49 figs, 67 tabs, 50 refs. (Author).

  12. Development of a tool to facilitate the understanding of radiation applying analogy between radiation and light

    International Nuclear Information System (INIS)

    Yamada, Koji

    2016-01-01

    Invisibility of radiation might hamper people's understanding on radiation. To overcome this invisibility a new tool, which could visualize the characteristics of radiation and the effects of decontamination by replacing invisible radiation to visible light based on the physical analogy between radiation and light, has been developed. Light emitting diode (LED) is adopted as light source in lieu of radionuclide. Iluminometer is used instead of dosimeter as detector to enable the quantitative measurement of illumination intensity. All these functions are equipped in a compact case made of acrylic resin plates. Contamination condition could be represented by turning on LED lights and decontamination condition could be represented by turning off LED light. Both spot and areal contamination conditions could be simulated by changing the shape and arrangement of LED lights. Inside space of the case is partitioned to two sub-spaces with an acrylic plate which simulates the outer wall of building. One sub-space stands for indoor space and the other outdoor space. This tool using light could facilitate the intuitive understanding as follows; (1) physical characteristics of radiation such as attenuation by distance and shielding by substance, (2) concept of decontamination and its effects, and (3) exposure dose concept. Besides this tool has been developed another tool which could demonstrate the wide range of radiation doses in a shape of intensity of light by the combination of LED lights and shading filters. These tools are very effective and fascinating teaching material or risk communication device for supporting the intuitive understanding of radiation and decontamination by people. (author)

  13. The development and purpose of the FREDERICA radiation effects database

    International Nuclear Information System (INIS)

    Copplestone, D.; Hingston, J.; Real, A.

    2008-01-01

    Any system for assessing the impact of a contaminant on the environment requires an analysis of the possible effects on the organisms and ecosystems concerned. To facilitate this, the FREDERICA radiation effects database has been developed to provide an online search of the known effects of ionising radiation on non-human species, taken from papers in the scientific peer reviewed literature. The FREDERICA radiation effects database has been produced by merging the work done on radiation effects under two European funded projects (FASSET and EPIC) and making the database available online. This paper highlights applications for the database, gaps in the available data and explains the use of quality scores to help users of the database determine which papers may benefit their research in terms of techniques and reproducibility

  14. Development of radiation hardened pixel sensors for charged particle detection

    CERN Document Server

    Koziel, Michal

    2014-01-01

    CMOS Pixel Sensors are being developed since a few years to equip vertex detectors for future high-energy physics experiments with the crucial advantages of a low material budget and low production costs. The features simultaneously required are a short readout time, high granularity and high tolerance to radiation. This thesis mainly focuses on the radiation tolerance studies. To achieve the targeted readout time (tens of microseconds), the sensor pixel readout was organized in parallel columns restricting in addition the readout to pixels that had collected the signal charge. The pixels became then more complex, and consequently more sensitive to radiation. Different in-pixel architectures were studied and it was concluded that the tolerance to ionizing radiation was limited to 300 krad with the 0.35- m fabrication process currently used, while the targeted value was several Mrad. Improving this situation calls for implementation of the sensors in processes with a smaller feature size which naturally imp...

  15. Management of diagnostic x-ray radiation in developing countries

    International Nuclear Information System (INIS)

    Date, T.

    2000-01-01

    The purpose of this study is to provide a simple, inexpensive, and effective method to prevent the scattering of x-ray radiation by using a lead apron in the x-ray rooms of developing countries. In developed countries, the scattering of x-ray radiation among patients and radiographers in diagnostic x-ray rooms has been minimized by various methods. However, in some developing countries, scattered x-ray radiation has not yet been adequately contained. The policy of As Law As Reasonably Achievable (ALARA) requires that patients who are waiting for their examinations must be protected from scattered x-ray radiation. However, from the author's experience, protection from scattered x-ray radiation in x-ray rooms is often insufficient in developing countries. In addition, major public hospitals in big cities are overwhelmed with patients because radiology resources in developing countries are concentrated in the big cities. Moreover, the situation is made worse by short working hours in public hospitals. Hours from 10 a.m. to 3 p.m. are typical. Because of the circumstances, radiographers, who are in a rush to finish all of the examinations within their normal working hours, sometimes allow patients to enter the x-ray rooms while they are waiting for their examinations. Chest and abdominal x-rays are the most common kinds of diagnostic x-ray examination in developing countries. Thus, in this study, anthropomorphic chest and abdominal phantoms were x-rayed for measuring the scattered x-ray radiation with and without protection using a 0.25mmPb lead apron at specific points from the anthropomorphic phantoms in the x-ray room. The lead apron was hung on a mobile apron-hanger and placed next to the anthropomorphic phantom. The scattered radiation dosimetry for chest x-rays proves that this simple method reduces scattered x-ray radiation to 15% at one-meter point and to almost 0% at the two-meter point from the anthropomorphic phantom in the x-ray room. Lead aprons are

  16. Development of a mobile robot for remote radiation measurement

    International Nuclear Information System (INIS)

    Sarkar, Ushnish; Saini, Surendra Singh; Swaroop, Tumapala Teja; Sreejith, P.; Kumar, Ravinder; Ray, Debasish Datta

    2016-01-01

    Remote measurement of radiation using mobile robots is recommended in nuclear installations. For this purpose various robots have been developed that carry a radiation sensor. However since the robot has to go very near to the source of radiation, the life of the robot's components is compromised due to high level of absorbed dose. It was earlier managed to increase the life expectancy of remote radiation measurement robots by allowing the sensor to be placed on an extendable telescopic assembly; analogous to a health physicist taking measurements using a Teletector. The first prototype developed had stair climbing capabilities but it was found to be over dimensioned for various potential applications. A significant use of such robots is in taking measurements at nuclear reprocessing facilities having narrow cluttered pathways. This required development of a new version of the robot capable of negotiating the narrow pathways of such facilities. This paper describes the different aspects of the development of the mobile robot system with flexible radiation sensing capabilities

  17. Contribution to developing the environment radiation protection methodology

    Energy Technology Data Exchange (ETDEWEB)

    Oudalova, A. [Institute of Atomic Power Engineering NRNU MEPhI (Russian Federation); Alexakhin, R.; Dubynina, M. [Russian Institute of Agricultural Radiology and Agroecology (Russian Federation)

    2014-07-01

    The environment sustainable development and biota protection, including the environment radiation protection are issues of nowadays interest in the society. An activity is ongoing on the development of a system of radiation protection for non-human biota. Anthropocentric and eco-centric principles are widely discussed. ICRP Publications 103, 108, 114 and many other reports and articles refer to the topic of environmental protection, reference animals and plants set, corresponding transfer parameters, dose models and derived consideration reference levels. There is still an open field for discussion of methods and approaches to get well-established procedure to assess environmental risks of radiation impacts to different organisms, populations and ecosystems. A huge work has been done by the ICRP and other organizations and research groups to develop and systematize approaches for this difficult subject. This activity, however, is not everywhere well-known and perceived, and more efforts are needed to bring ideas of eco-centric strategy in the environment radiation protection not only to public but to specialists in many countries as well. One of the main points of interest is an assessment of critical doses and doses rates for flora and fauna species. Some aspects of a possible procedure to find their estimates are studied in this work, including criteria for datasets of good quality, models of dose dependence, sensitivity of different umbrella endpoints and methods of original massive datasets treatment. Estimates are done based on information gathered in a database on radiation-induced effects in plants. Data on biological effects in plants (umbrella endpoints of reproductive potential, survival, morbidity, morphological, biochemical, and genetic effects) in dependence on dose and dose rates of ionizing radiation have been collected from reviewed publications and maintained in MS Access format. The database now contains about 7000 datasets and 25000 records

  18. Development of space foods using radiation technology

    International Nuclear Information System (INIS)

    Lee, Ju-Woon; Byun, Myung-Woo; Kim, Jae-Hun; Song, Beom-Suk; Choi, Jong-IL; Park, Jin-Kyu; Park, Jae-Nam; Han, In-Jun

    2008-07-01

    Four Korean food items (Kimchi, ready-to-eat fermented vegetable; Ramen, ready-to-cook noodles; Nutrition bar, ready-to-eat raw grain bar; Sujeonggwa, cinnamon beverage) have been developed as space foods by the application of high-dose gamma irradiation. All Korean space foods were certificated for use in space flight conditions during 30 days by the Russian Institute of Biomedical Problems. Establishment of research protocols on muscle atrophy mechanism using two-dimensional electrophoresis and various blotting analyses are conducted. And two bio-active molecules that potentially play an preventive role of muscle atrophy are uncovered. Integrative protocols linking between the effect of bio-active molecules and treadmill exercise for muscle atrophy inhibition are established. Reduction in body temperature and heartbeat rate were monitored after HIT injection to mice was conducted. Development of Korean astronaut preferred flavoring for space food was conducted to reduced atherogenic index (AI) than butter fat. The spread added honey and pineapple essence was preferred spreadability and overall flavor by sensory evaluation. Flavor was affected by irradiation source (γ-ray or electron beam) or irradiation dosage (10, 20, 30, 40 and 50 kGy) using electronic nose system an space foods using gamma irradiation pH of porridge was mostly stable and pH increased. Most of TBARS value was generally low, and there wasn't any significant difference. Consistency, viscosity, and firmness was higher in round rice porridge and half rice porridge than in rice powder porridge, and increase in added water amount led to decrease of all textural properties

  19. Development of space foods using radiation technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ju-Woon; Byun, Myung-Woo; Kim, Jae-Hun; Song, Beom-Suk; Choi, Jong-IL; Park, Jin-Kyu; Park, Jae-Nam; Han, In-Jun

    2008-07-15

    Four Korean food items (Kimchi, ready-to-eat fermented vegetable; Ramen, ready-to-cook noodles; Nutrition bar, ready-to-eat raw grain bar; Sujeonggwa, cinnamon beverage) have been developed as space foods by the application of high-dose gamma irradiation. All Korean space foods were certificated for use in space flight conditions during 30 days by the Russian Institute of Biomedical Problems. Establishment of research protocols on muscle atrophy mechanism using two-dimensional electrophoresis and various blotting analyses are conducted. And two bio-active molecules that potentially play an preventive role of muscle atrophy are uncovered. Integrative protocols linking between the effect of bio-active molecules and treadmill exercise for muscle atrophy inhibition are established. Reduction in body temperature and heartbeat rate were monitored after HIT injection to mice was conducted. Development of Korean astronaut preferred flavoring for space food was conducted to reduced atherogenic index (AI) than butter fat. The spread added honey and pineapple essence was preferred spreadability and overall flavor by sensory evaluation. Flavor was affected by irradiation source ({gamma}-ray or electron beam) or irradiation dosage (10, 20, 30, 40 and 50 kGy) using electronic nose system an space foods using gamma irradiation pH of porridge was mostly stable and pH increased. Most of TBARS value was generally low, and there wasn't any significant difference. Consistency, viscosity, and firmness was higher in round rice porridge and half rice porridge than in rice powder porridge, and increase in added water amount led to decrease of all textural properties.

  20. Development of the protein crystallography by synchrotron radiation

    International Nuclear Information System (INIS)

    Yamamoto, Masaki

    2014-01-01

    Since crystal structure determination of the first protein by Kendrew in 1959, protein crystallography developed into the leading role of the protein structure study by various technology developments. Especially the utilization of synchrotron radiation from the 1990s brought innovative progress of protein crystallography on the data quality and the phasing method and had expanded the samples targets including membrane proteins and suprarmolecular complexes. Here I give the outline of the history and the future prospects of the protein crystallography from the role of synchrotron radiation. (author)

  1. Development of Radio Frequency Antenna Radiation Simulation Software

    International Nuclear Information System (INIS)

    Mohamad Idris Taib; Rozaimah Abd Rahim; Noor Ezati Shuib; Wan Saffiey Wan Abdullah

    2014-01-01

    Antennas are widely used national wide for radio frequency propagation especially for communication system. Radio frequency is electromagnetic spectrum from 10 kHz to 300 GHz and non-ionizing. These radiation exposures to human being have radiation hazard risk. This software was under development using LabVIEW for radio frequency exposure calculation. For the first phase of this development, software purposely to calculate possible maximum exposure for quick base station assessment, using prediction methods. This software also can be used for educational purpose. Some results of this software are comparing with commercial IXUS and free ware NEC software. (author)

  2. radiation safety culture for developing country: Basis for s minimum operational radiation protection programme

    International Nuclear Information System (INIS)

    Rozental, J. J.

    1997-01-01

    The purpose of this document is to present a methodology for an integrated strategy aiming at establishing an adequate radiation Safety infrastructure for developing countries, non major power reactor programme. Its implementation will allow these countries, about 50% of the IAEA's Member States, to improve marginal radiation safety, specially to those recipients of technical assistance and do not meet the Minimum radiation Safety Requirements of the IAEA's Basic Safety Standards for radiation protection Progress in the implementation of safety regulations depends on the priority of the government and its understanding and conviction about the basic requirements for protection against the risks associated with exposure to ionizing radiation. There is no doubt to conclude that the reasons for the deficiency of sources control and dose limitation are related to the lack of an appropriate legal and regulatory framework, specially considering the establishment of an adequate legislation; A minimum legal infrastructure; A minimum operational radiation safety programme; Alternatives for a Point of Optimum Contact, to avoid overlap and conflict, that is: A 'Memorandum of Understanding' among Regulatory Authorities in the Country, dealing with similar type of licensing and inspection

  3. Effects of radiation on development, especially of the nervous system

    International Nuclear Information System (INIS)

    Hicks, S.P.; D'Amato, C.J.

    1980-01-01

    Humans and other organisms are exposed to ionizing radiations from a variety of natural and man-made sources. Radiation may cause mutations and chromosome abnormalities, cell-killing, alterations and transformations in cell growth, and carcinogenetic changes. This paper considers principally the cell-killing and nonlethal cell alterations in developing laboratory mammals and humans, especially the nervous system, that follow irradiation and often lead to malformation and disturbed function, but at certain stages to restitution of the injury. Most of what researchers know about the mechanisms of these radiation effects in man is derived from animal experiments, especially with rats. The few observations in humans have corresponded closely to them. Researchers illustrate the cellular effects and malformative results with an example of cell-killing in the developing cortex of a human fetus exposed to therapeutic radiation in utero; a current timetable of the malformative and other effects of radiation on rats during development from which expectations of human effects might be extrapolated; examples of hydrocephalus produced in rats; low-dose alterations of nerve cells in rats; and a microcephalic Japanese boy exposed in utero to the atomic bomb at Hiroshima in 1945

  4. Development of new materials by utilizing radiation crosslinking

    International Nuclear Information System (INIS)

    Ueno, Keiji; Uda, Yujiro; Suzuki, Shizuo

    1989-01-01

    About 30 years have elapsed since the cables by electron beam crosslinking were developed as the first industrial utilization of radiation in Japan. At present about 200 electron beam accelerators are used industrially in Japan, and cable industry ranks at the top, followed by foaming polyethylene and curing, and the preliminary vulcanization of tires. The effect of these irradiations is the reforming of polymers by radiation crosslinking. In cables, the heat resistance and chemical resistance of insulators are improved by radiation crosslinking. By applying radiation crosslinking to polyurethane elastomer, its weakest point, waterproof property, was improved. Moreover, by using this crosslinked polyurethane elastomer for cable coating, the reliability of the sensor cables for brake system was able to be remarkably improved. As another new application of radiation crosslinking process, the improvement of the heat resistance of engineering plasties was examined. The structure of radiation crosslinked urethane elastomer cables, their endurance in hot water and oil, and the life, and the characteristics of sensor cables are reported. Multi-functional monomers, the molecular structure, and the various characteristics of engineering plastics are described. (K.I.)

  5. Development of multi copter based autonomous unmanned aerial radiation monitoring system for the remote impact assessment of radiation emergencies

    International Nuclear Information System (INIS)

    Jose, Jis Romal; Gupta, Ashutosh; Bahadur, Shuchita; Chaudhury, Probal; Pradeepkumar, K.S.

    2016-01-01

    During any radiation emergency, the level and extent of radioactive contamination need to be monitored for the timely and effective implementation of countermeasures to reduce the radiation exposure to public. In such a scenario, radiation surveillance can be carried out using either ground based mobile monitoring techniques or aerial radiation monitoring. Aerial radiation monitoring is quick and capable of scanning the areas which are not easily accessible by the ground based mobile monitoring. Compact unmanned aerial vehicle based radiation surveillance system is ideal in above mentioned radiation emergency scenarios as it can be rapidly deployed in the affected area and radiation exposure to the monitoring personal can be totally avoided. This paper describes development of multi copter based autonomous unmanned aerial radiation monitoring system for the remote impact assessment of radiation emergencies

  6. Development of materials for fuel cell application by radiation technology

    International Nuclear Information System (INIS)

    Rhee, Chang Kyu; Lee, Min Ku; Park, Junju; Lee, Gyoungja; Lee, Byung Cheol; Shin, Junhwa; Nho, Youngchang; Kang, Philhyun; Sohn, Joon Yong; Rang, Uhm Young

    2012-06-01

    The development of the single cell of SOFC with low operation temperature at and below 650 .deg. C(above 400 mW/cm 2 ) Ο The development of fabrication method for the single cell of solid oxide fuel cell (SOFC) by dip-coating of nanoparticles such as NiO, YSZ, Ag, and Ag/C, etc. Ο The optimization of the preparation and performance of SOFC by using nanoparticles. Ο The preparation of samples for SOFC with large dimension. The development of fluoropolymer-based fuel cell membranes with crosslinked structure by radiation grafting technique Ο The development of fuel cell membranes with low methanol permeability via the introduction of novel monomers (e. g. vinylbenzyl chloride and vinylether chloride) by radiation grafting technique Ο The development of hydrocarbon fuel cell membrane by radiation crosslinking technique Ο The structure analysis and the evaluations of the property, performance, and radiation effect of the prepared membranes Ο The optimization of the preparation and performance of DMFC fuel cell membrane via the structure-property analysis (power: above 130 mW/cm 2 /50 cm 2 at 5M methanol) Ο The preparation of samples for MEA stack assembly

  7. Development of aerial gamma radiation survey system, 1

    International Nuclear Information System (INIS)

    Tsutsumi, Masahiro; Saito, Komei; Sakamoto, Ryuichi; Nagaoka, Toshi; Moriuchi, Shigeru

    1986-05-01

    JAERI has started to develop an aerial gamma radiation survey system by a helicopter in 1980. The development of measuring instruments, the experiments in the field of natural and artificial radiation sources, and the imaginary emergency survey at a real site, were executed. This report describes mainly about the hardware and software of this system. The system consists of gamma-ray measuring instruments with NaI(Tl) scintillation detectors, microwave positioning instruments, and a data processing system for postflight data. A foreign-made geological survey system is improved on for radiation measurements. For covering the wide radiation range, detectors of various shapes and sizes are prepared, from a large volume detector, DET-1024 - four 4'' x 4'' x 16'' crystals assembly - to a 2'' diameter x 2'' NaI(Tl) crystal. Radiation and position data are recorded on a magnetic tape, and computer-processed afterwards. Moreover, scene below flight courses and internal communication are recorded on video tape with the information of clock and position superimposed. In consequence of field experiments carried out five times, basic radiation data for evaluating airborne acquired data are accumulated, and flight survey procedures are established. As more practical use, a system has been produced more compactly and functionally. Exposure rates (> 1 mR/h), energy distribution spectra, and energy window counts are obtained for radiation data. Using the Spectrum-Dose Conversion Method, the accurate exposure rates are directly calculated from pulse height spectra. Numerical tables of G(E) function converting pulse height spectra into exposures are shown in this report. As regards the analysis of survey data, process codes have been completed with either large-computer or mini-computer. (author)

  8. Development of superior radiation resistant materials and cables. 2

    Energy Technology Data Exchange (ETDEWEB)

    Ikehara, Junichiro; Kanemitsuya, Kazuhiko; Ohara, Hideo; Araki, Syogo; Hamachi, Katsuhiko [Mitsubishi Cable Industries Ltd., Tokyo (Japan)

    1996-01-01

    Many nuclear power plants have been constructed in Japan and electric power generation is now highly dependent on this technology. Therefore, the needs for facilities that will enrich and reprocess nuclear fuel from nuclear power stations will be high. As there are areas with high levels of radiation, the cables which can be used in these environments are needed. We have developed a superior radiation-resistant cable which uses halogen flame-retardant materials. This radiation-resistant cable consists of Ethylene-propylene rubber (EPDM) insulation and Chlorosulfonated polyethylene (CSM) sheath can be safely used in areas with high levels of radiation. We developed this product to aid in disaster prevention. Non-halogen, flame-retardant EPDM is used for the insulation, and low-halogen, flame-retardant CSM and new non-halogen, flame-retardant materials are used for the sheath. These cables have superior flame-retardant properties and generate little smoke on corrosive gas. This products can hence reduce the danger of a secondary disaster in a fire. We expect that these cables will find application in areas with high levels of radiation. (author).

  9. Development of superior radiation resistant materials and cables. 2

    International Nuclear Information System (INIS)

    Ikehara, Junichiro; Kanemitsuya, Kazuhiko; Ohara, Hideo; Araki, Syogo; Hamachi, Katsuhiko

    1996-01-01

    Many nuclear power plants have been constructed in Japan and electric power generation is now highly dependent on this technology. Therefore, the needs for facilities that will enrich and reprocess nuclear fuel from nuclear power stations will be high. As there are areas with high levels of radiation, the cables which can be used in these environments are needed. We have developed a superior radiation-resistant cable which uses halogen flame-retardant materials. This radiation-resistant cable consists of Ethylene-propylene rubber (EPDM) insulation and Chlorosulfonated polyethylene (CSM) sheath can be safely used in areas with high levels of radiation. We developed this product to aid in disaster prevention. Non-halogen, flame-retardant EPDM is used for the insulation, and low-halogen, flame-retardant CSM and new non-halogen, flame-retardant materials are used for the sheath. These cables have superior flame-retardant properties and generate little smoke on corrosive gas. This products can hence reduce the danger of a secondary disaster in a fire. We expect that these cables will find application in areas with high levels of radiation. (author)

  10. Development of application technology of radiation-resistant microorganism

    International Nuclear Information System (INIS)

    Kim, Dong Ho; Lim, Sang Yong; Joe, Min Ho; Jung, Jin Woo; Jung, Sun Wook; Song, Du Sup; Choi, Young Ji

    2009-02-01

    The scope of the project is divided into of three parts; (i) to define the survival strategy of radiation-resistant microbes, especially Deinococcus (ii) acquisition of gene resources encoding the novel protein and related with the production of functional materials (iii) development of control technology against radiation-resistant microbes. To this aim, first, the whole transcriptional response of the D. radiodurans strain haboring pprI mutation, which plays an important role in radiation resistance, was analyzed by cDNA microarray. The anti-oxidant activity of the major carotenoid of D. radiodurans, deinoxanthin, was analyzed and the strain was constructed, in which the gene necessary for bio- synthesis of deinoxanthin is deleted. The response to cadmium of D. radiodurans was also investigated through cDNA microarray analysis. Radiogenic therapy, one of the cancer treatments, is designed to use radiation-inducible gene for the treatment. To develop the gene-transfer vehicle for radiogenic therapy, we have investigated the virulence mechanism of Salmonella, which is tumor-targeting bacteria and studied the synergistic effect of some anti-cancer agents on radiation treatment for cancer. Finally, we confirmed that irradiation could decompose a fungus toxin, patulin, into various harmless by-products

  11. Development of a novel gamma probe for detecting radiation direction

    Science.gov (United States)

    Pani, R.; Pellegrini, R.; Cinti, M. N.; Longo, M.; Donnarumma, R.; D'Alessio, A.; Borrazzo, C.; Pergola, A.; Ridolfi, S.; De Vincentis, G.

    2016-01-01

    Spatial localization of radioactive sources is currently a main issue interesting different fields, including nuclear industry, homeland security as well as medical imaging. It is currently achieved using different systems, but the development of technologies for detecting and characterizing radiation is becoming important especially in medical imaging. In this latter field, radiation detection probes have long been used to guide surgery, thanks to their ability to localize and quantify radiopharmaceutical uptake even deep in tissue. Radiolabelled colloid is injected into, or near to, the tumor and the surgeon uses a hand-held radiation detector, the gamma probe, to identify lymph nodes with radiopharmaceutical uptkake. The present work refers to a novel scintigraphic goniometric probe to identify gamma radiation and its direction. The probe incorporates several scintillation crystals joined together in a particular configuration to provide data related to the position of a gamma source. The main technical characteristics of the gamma locator prototype, i.e. sensitivity, spatial resolution and detection efficiency, are investigated. Moreover, the development of a specific procedure applied to the images permits to retrieve the source position with high precision with respect to the currently used gamma probes. The presented device shows a high sensitivity and efficiency to identify gamma radiation taking a short time (from 30 to 60 s). Even though it was designed for applications in radio-guided surgery, it could be used for other purposes, as for example homeland security.

  12. Development of application technology of radiation-resistant microorganism

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dong Ho; Lim, Sang Yong; Joe, Min Ho; Jung, Jin Woo; Jung, Sun Wook; Song, Du Sup; Choi, Young Ji [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2009-02-15

    The scope of the project is divided into of three parts; (i) to define the survival strategy of radiation-resistant microbes, especially Deinococcus (ii) acquisition of gene resources encoding the novel protein and related with the production of functional materials (iii) development of control technology against radiation-resistant microbes. To this aim, first, the whole transcriptional response of the D. radiodurans strain haboring pprI mutation, which plays an important role in radiation resistance, was analyzed by cDNA microarray. The anti-oxidant activity of the major carotenoid of D. radiodurans, deinoxanthin, was analyzed and the strain was constructed, in which the gene necessary for bio- synthesis of deinoxanthin is deleted. The response to cadmium of D. radiodurans was also investigated through cDNA microarray analysis. Radiogenic therapy, one of the cancer treatments, is designed to use radiation-inducible gene for the treatment. To develop the gene-transfer vehicle for radiogenic therapy, we have investigated the virulence mechanism of Salmonella, which is tumor-targeting bacteria and studied the synergistic effect of some anti-cancer agents on radiation treatment for cancer. Finally, we confirmed that irradiation could decompose a fungus toxin, patulin, into various harmless by-products.

  13. Development of a novel gamma probe for detecting radiation direction

    International Nuclear Information System (INIS)

    Pani, R.; Pellegrini, R.; Cinti, M.N.; Longo, M.; Donnarumma, R.; Borrazzo, C.; D'Alessio, A.; Pergola, A.; Ridolfi, S.; Vincentis, G. De

    2016-01-01

    Spatial localization of radioactive sources is currently a main issue interesting different fields, including nuclear industry, homeland security as well as medical imaging. It is currently achieved using different systems, but the development of technologies for detecting and characterizing radiation is becoming important especially in medical imaging. In this latter field, radiation detection probes have long been used to guide surgery, thanks to their ability to localize and quantify radiopharmaceutical uptake even deep in tissue. Radiolabelled colloid is injected into, or near to, the tumor and the surgeon uses a hand-held radiation detector, the gamma probe, to identify lymph nodes with radiopharmaceutical uptkake. The present work refers to a novel scintigraphic goniometric probe to identify gamma radiation and its direction. The probe incorporates several scintillation crystals joined together in a particular configuration to provide data related to the position of a gamma source. The main technical characteristics of the gamma locator prototype, i.e. sensitivity, spatial resolution and detection efficiency, are investigated. Moreover, the development of a specific procedure applied to the images permits to retrieve the source position with high precision with respect to the currently used gamma probes. The presented device shows a high sensitivity and efficiency to identify gamma radiation taking a short time (from 30 to 60 s). Even though it was designed for applications in radio-guided surgery, it could be used for other purposes, as for example homeland security

  14. Experimental studies of radiation damage of silicon detectors

    International Nuclear Information System (INIS)

    Angelescu, T.; Ghete, V.M.; Ghiordanescu, N.; Lazanu, I.; Mihul, A.; Golutvin, I.; Lazanu, S.; Savin, I.; Vasilescu, A.; Biggeri, U.; Borchi, E.; Bruzzi, M.; Li, Z.; Kraner, H.W.

    1994-02-01

    New particle physics experiments are correlated with high luminosity and/or high energy. The new generation of colliding beam machines which will be constructed will make an extrapolation of a factor of 100 in the center of mass energy and of 1000 in luminosity beyond present accelerators. The scientific community hopes that very exciting physics results could be achieved this way, from the solution to the problem of electroweak symmetry breaking to the possible discovery of new, unpredicted phenomena. The particles which compose the radiation field are: electrons, pions, neutrons, protons and photons. It has become evident that the problem of the radiation resistance of detectors in this severe environment is a crucial one. This situation is complicated more by the fact that detectors must work all the run time of the machine, and better all the time of the experiment, without replacement (part or whole). So, studies related to the investigation of the radiation hardness of all detector parts, are developing. The studies are in part material and device characterization after irradiation, and in part technological developments, made in order to find harder, cheaper technologies, for larger surfaces. Semiconductor detectors have proven to be a good choice for vertex and calorimeter. Both fixed target machines and colliders had utilized in the past silicon junction detectors as the whole or part of the detection system. Precision beam hodoscopes and sophisticated trigger devices with silicon are equally used. The associated electronics in located near the detectors, and is subjected to the same radiation fields. Studies of material and device radiation hardness are developing in parallel. Here the authors present results on the radiation hardness of silicon, both as a bulk material and as detectors, to neutron irradiation at high fluences

  15. Radiation protection in biological investigation centers. Problematic, development and perspectives

    International Nuclear Information System (INIS)

    Macias, M.T.; Pina, R.; Usera, F.

    1998-01-01

    The radiological risk derivatives from the radioisotope techniques accomplished in the different investigation lines developed in the Centers object of this work, have necessary made establishing an organization that assure some adequate protection conditions in the use of the ionizing radiations

  16. Development of radiation-curable resin based on natural rubber

    Energy Technology Data Exchange (ETDEWEB)

    Mohd, Dahlan; Harun, Abdul Ghani [Nuclear Energy Unit, Bangi, Selangor (Malaysia)

    1994-12-31

    A new radiation curable resin based on natural rubber has been developed. The resin was based on the reaction between low molecular weight epoxidised natural rubber and acrylic acid. When formulated with reactive monomers and photoinitiator, it solidified upon irradiation with UV light. The resin may find applications in coating for cellulosic-based substrates and pressure-sensitive adhesive.

  17. Development of radiation-curable resin based on natural rubber

    International Nuclear Information System (INIS)

    Dahlan Mohd; Abdul Ghani Harun

    1993-01-01

    A new radiation curable resin based on natural rubber has been developed. The resin was based on the reaction between low molecular weight epoxidised natural rubber and acrylic acid. When formulated with reactive monomers and photoinitiator, it solidified upon irradiation with UV light. The resin may find applications in coating for cellulosic-based substrates and pressure-sensitive adhesive

  18. Development of radiation detection and measurement system - Development of scintillation radiation sensor

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Hee Dong; Kim, Wan [Kyungpook National University, Taegu (Korea); Kim, Do Sung [Taegu University, Taegu (Korea)

    2000-03-01

    We have been fabricated CsI(Tl) scintillation crystals and plastic scintillators for radiation-based measuring equipment. CsI (Tl) single crystals doped with thallium as an activator were grown using the Czochralski method. The crystal structure of grown CsI(Tl) was bcc, and it was confirmed that its lattice constant was 4,568 A. The spectral range of luminescence of CsI(Tl) was 350 {approx} 700 nm independent of thallium concentration, and the fast component of the luminescence was decreased with increasing thallium concentration. The energy resolution of CsI(Tl) scintillator doped with 0.1 mole% thallium was about 9% for 137 Cs {gamma}-rays. The relation formula of {gamma}-ray energy versus energy resolution was ln(FWHM%)=-0.705ln({epsilon})+6.75. The radiation damage of CsI(Tl) increased in proportion to thallium concentration and radiation damage of CsI(Tl) increased in proportion to thallium concentration and radiation dosage, and the irradiated crystals were colored reddish. The radiation induced absorption bands appeared around 355, 425, 520 and 555 nm, and their energy level were about 3.50, 2.88, 2.39 and 2.21 eV. Plastic scintillators were fabricated thermal polymerization method. Those were polymerizing at 120 deg. C, during 72 hours, and annealing at 75 deg. C, during 24 hours. When the concentration of 1st solute was 1.5 wt% and concentration of 2nd solute was 0.01 wt%, the characteristics of scintillation were very excellent. Also 3.0 wt% tetraphenyl lead were loaded to improve the detection efficiency of {gamma}-ray. The range of emission spectrum was 400 {approx} 450nm, and the central peak was 415 nm. The radiation damage was not appear under 1*10{sup 3}Gy, but the color of plastic scintillator was changed to brown, over 1*10{sup 4}Gy exposured. 84 refs., 39 figs. (Author)

  19. Radiation Background and Attenuation Model Validation and Development

    Energy Technology Data Exchange (ETDEWEB)

    Peplow, Douglas E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Santiago, Claudio P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-08-05

    This report describes the initial results of a study being conducted as part of the Urban Search Planning Tool project. The study is comparing the Urban Scene Simulator (USS), a one-dimensional (1D) radiation transport model developed at LLNL, with the three-dimensional (3D) radiation transport model from ORNL using the MCNP, SCALE/ORIGEN and SCALE/MAVRIC simulation codes. In this study, we have analyzed the differences between the two approaches at every step, from source term representation, to estimating flux and detector count rates at a fixed distance from a simple surface (slab), and at points throughout more complex 3D scenes.

  20. Developments and potential of radiation processing in the Philippines

    Energy Technology Data Exchange (ETDEWEB)

    Singson, C; Carmona, C [Philippine Atomic Energy Commission, Diliman, Quezon City

    1981-01-01

    This paper describes the research and development activities in three areas of radiation processing, namely: food irradiation, medical product sterilization and wood plastic combination. Plans and efforts exerted to acquire a larger gamma source to augment our present 5,000 curie source are discussed. Cost estimates for a radiation facility are presented on the basis of the market potential of food irradiation and medical product sterilization. Existing local industries that can benefit from the adaptation of irradiation technology in their processing requirements are described.

  1. Development of fusion first-wall radiation damage facilities

    International Nuclear Information System (INIS)

    McElroy, R.J.; Atkins, T.

    1986-11-01

    The report describes work performed on the development of fusion-reactor first-wall simulation facilities on the Variable Energy Cyclotron, at Harwell, United Kingdom. Two irradiation facilities have been constructed: i) a device for helium and hydrogen filling up to 1000 ppm for post-irradiation mechanical properties studies, and ii) a helium implantation and damage facility for simultaneous injection of helium and radiation damage into a specimen under stress. These facilities are now fully commissioned and are available for investigations of first-wall radiation damage and for intercorrelation of fission- and fusion -reactor materials behaviour. (U.K.)

  2. Development of a programming model for radiation-resistant software

    International Nuclear Information System (INIS)

    Eichhorn, G.; Piercey, R.B.

    1984-01-01

    The adverse effects of ionizing radiation on microelectronic systems include cumulative dosage effects, single-event upsets (SEU's) and latch-up. Most frequent, especially when the radiation environment includes heavy ions, are SEU's. Unfortunately SEU's are difficult to detect since they can be read (in RAM or ROM) as valid addresses. They can however be handled in software by proper techniques. The authors refer to their method as MRS - Maximally Redundant Software. The MRS programming model which the authors are developing uses multiply redundant boot blocks, majority voting, periodic refresh, and error recovery techniques to minimize the deleterious effects of SEU's. 1 figure

  3. Development of Radiation Hard Radiation Detectors, Differences between Czochralski Silicon and Float Zone Silicon

    CERN Document Server

    Tuominen, Eija

    2012-01-01

    The purpose of this work was to develop radiation hard silicon detectors. Radiation detectors made ofsilicon are cost effective and have excellent position resolution. Therefore, they are widely used fortrack finding and particle analysis in large high-energy physics experiments. Silicon detectors willalso be used in the CMS (Compact Muon Solenoid) experiment that is being built at the LHC (LargeHadron Collider) accelerator at CERN (European Organisation for Nuclear Research). This work wasdone in the CMS programme of Helsinki Institute of Physics (HIP).Exposure of the silicon material to particle radiation causes irreversible defects that deteriorate theperformance of the silicon detectors. In HIP CMS Programme, our approach was to improve theradiation hardness of the silicon material with increased oxygen concentration in silicon material. Westudied two different methods: diffusion oxygenation of Float Zone silicon and use of high resistivityCzochralski silicon.We processed, characterised, tested in a parti...

  4. Development of radiation protection and measurement technology -A study on the radiation and environmental safety-

    International Nuclear Information System (INIS)

    Chang, Si Young; Seo, Kyeong Won; Yoon, Seok Cheol; Lee, Tae Yeong; Kim, Bong Hwan; Chung, Deok Yeon; Lee, Ki Chang; Kim, Jong Soo; Yoon, Yeo Chang; Kim, Jang Ryeol; Lee, Sang Yoon

    1994-07-01

    Reference radiation fields which can meet the national and international standard and criteria such as the ANSI N13.11 have been designed, produced and evaluated to maintain the national traceability and reliability of the radiation measurement and to provide precise calibration of the various radiation measuring instruments as well as standard irradiation of the personal dosimeters for the performance evaluation. Existing dose calculation algorithm has been improved to correctly evaluate the shallow dose from the β(Ti-204) + γ(Cs-137) mixed radiation exposure by applying the TLD response correction function newly derived in this study. A mathematical algorithm to calculate the internal dose from inhalation of the uranium isotopes has been developed on the basis of the ICRP-30 respiratory tract model. Detailed performance analysis of the KAERI lung counter has been carried out to participate in the intercomparison of lung dosimetry. A preliminary and basic study on the quantitative method of optimal dose reduction based on the ALARA concept has been performed to technically support and strengthen the national radiation protection infrastructure. (Author)

  5. Development of high effectiveness biomimetic materials by radiation

    International Nuclear Information System (INIS)

    Nho, Youngchang; Lim, Younmook; Gwon, Huijeong; Park, Jongseok; Jeong, Sungin; Jo, Seonyoung

    2013-09-01

    The aims of this project is to develop the high-performance biomedical new materials. In the 1 st project, we have developed the polymer matrix for drug delivery systems (DDS) for mucosa membrane. We studied on the drug release behavior such as election of drug loading method for antibiotics, propolis and adrenocortic hormone valuation of drug release behavior. The oral DDS is to cure gingival disease as well as inflammation in mouth. It is expected that a new market will be created in the field of DDS for oral mucosa. The 2 nd project, we have developed the multi-functional artificial skin for substitution of animal test such as toxicity, whitening, wrinkle improvement, skin for substitution and skin sensitivity by radiation. It is expected for the above development of biocompatible artificial skin model with good physical property by using radiation technique to be useful for the future biology, cosmetics and pharmaceutical research

  6. Development of high effectiveness biomimetic materials by radiation

    Energy Technology Data Exchange (ETDEWEB)

    Nho, Youngchang; Lim, Younmook; Gwon, Huijeong; Park, Jongseok; Jeong, Sungin; Jo, Seonyoung

    2013-09-15

    The aims of this project is to develop the high-performance biomedical new materials. In the 1{sup st} project, we have developed the polymer matrix for drug delivery systems (DDS) for mucosa membrane. We studied on the drug release behavior such as election of drug loading method for antibiotics, propolis and adrenocortic hormone valuation of drug release behavior. The oral DDS is to cure gingival disease as well as inflammation in mouth. It is expected that a new market will be created in the field of DDS for oral mucosa. The 2{sup nd} project, we have developed the multi-functional artificial skin for substitution of animal test such as toxicity, whitening, wrinkle improvement, skin for substitution and skin sensitivity by radiation. It is expected for the above development of biocompatible artificial skin model with good physical property by using radiation technique to be useful for the future biology, cosmetics and pharmaceutical research.

  7. Dosimetry of external radiation: Recent developments. Advanced training course

    International Nuclear Information System (INIS)

    Ambrosi, P.; Boehm, J.; Doerschel, B.

    1999-02-01

    Between February 24 and 26, 1999, the Fachverband fuer Strahlenschutz e.V. held an advanced training course in Tabarz/Thuringia on the subject 'Dosimetry of external radiation: Recent developments'. The following subject matters were dealt with: New concepts and measurands; Present national and international rules; Measurement of the body dose; Exposure conditions at workplaces; and Present state of dosimetric metrology. In correspondence with the subject, the course was organized by the working group 'Dosimetry of external radiation'. Target groups of the course were persons bearing responsibility in the radiation protection sector and interested persons with basic knowledge of this field. The present report comprises the written versions of lectures delivered at the meeting. (orig.) [de

  8. A Radiation Laboratory Curriculum Development at Western Kentucky University

    International Nuclear Information System (INIS)

    Barzilov, Alexander P.; Novikov, Ivan S.; Womble, Phil C.

    2009-01-01

    We present the latest developments for the radiation laboratory curriculum at the Department of Physics and Astronomy of Western Kentucky University. During the last decade, the Applied Physics Institute (API) at WKU accumulated various equipment for radiation experimentation. This includes various neutron sources (computer controlled d-t and d-d neutron generators, and isotopic 252 Cf and PuBe sources), the set of gamma sources with various intensities, gamma detectors with various energy resolutions (NaI, BGO, GSO, LaBr and HPGe) and the 2.5-MeV Van de Graaff particle accelerator. XRF and XRD apparatuses are also available for students and members at the API. This equipment is currently used in numerous scientific and teaching activities. Members of the API also developed a set of laboratory activities for undergraduate students taking classes from the physics curriculum (Nuclear Physics, Atomic Physics, and Radiation Biophysics). Our goal is to develop a set of radiation laboratories, which will strengthen the curriculum of physics, chemistry, geology, biology, and environmental science at WKU. The teaching and research activities are integrated into real-world projects and hands-on activities to engage students. The proposed experiments and their relevance to the modern status of physical science are discussed.

  9. Development of flame retardant, radiation resistant insulating materials

    Energy Technology Data Exchange (ETDEWEB)

    Hagiwara, M.

    1984-01-01

    On the cables used for nuclear power stations, in particular those ranked as IE class, flame retardation test, simulated LOCA environment test, radiation resistance test and so on are imposed. The results of the evaluation of performance by these tests largely depend on the insulating materials mainly made of polymers. Ethylene propylene copolymer rubber has been widely used as cable insulator because of its electrical characteristics, workability, economy and relatively good radiation resistance, but it is combustible, therefore, in the practical use, it is necessary to make it fire resistant. The author et al. have advanced the research on the molecular design of new fire retarding materials, and successfully developed acenaphthylene bromide condensate, which is not only fire resistant but also effective for improving radiation resistance. The condition of flame retardant, radiation resistant auxiliary agents is explained, and there are additive type and reaction type in fire retarding materials. The synthesis of acenaphthylene bromide condensate and its effect of giving flame retardant and radiation resistant properties are reported. The characteristics of the cables insulated with the flame retardant ethylene propylene rubber containing acenaphthylene bromide condensate were tested, and the results are shown. (Kako, I.).

  10. Research on industrial development of radiation sterilization in Sichuan

    International Nuclear Information System (INIS)

    Chen Xun; Zhu Rong; Chen Jigang; Ouyang Qiongli

    2010-01-01

    Radiation sterilization is widely applied in food processing, pharmaceutical manufacturing and medical instrumentation producing. As this industry offers service to related corporations, its development depends largely on the market scale of the relevant industries. This article mainly discusses the balance point between the capacity of radiation sterilization and the requirement of its market. There are less than 1% of the companies in Sichuan which using radiation sterilization for its products, broad prospects has shown in this field. There are 3 key points to make its output value reach 0.1% of the GDP in Sichuan: 1. Breaking the restrictions of capacity and inappropriate resources distribution. 2. Promoting the technique of radiation sterilization, guiding corporation to reduce their dependence on food additive from the perspective of food safety, make effective implantation of radiation sterilization into their manufacture processes. 3. Increasing publicity, eliminating scared mentality among customer on nuclear technology, helping manufacturing corporations to establish green environmental protection brand, directing our customer to a more healthy awareness. (authors)

  11. Development of accelerator radiation protection at the SSC

    International Nuclear Information System (INIS)

    Toohig, T.

    1993-11-01

    The design of the Superconducting Super Collider evolved over a series of studies from 1984 to 1989. Considerations of concentration of radiation sources and provisions for operational control and monitoring of radiation were determining elements in the design concepts for the facility. The development of the designs involved an extension of the range of applicability of energy deposition and radiation shielding codes beyond the 3 TeV level of the proposed UNK collider to 20 TeV for single beam effects and to 40 TeV in the collision regions. This extrapolation was complicated by the newly discovered, very energetic muons from short-lived states associated with heavy quark states. The design guideline for radiation protection was specified to be 10 mRem/yr, 10% of the Federal limit. In order to limit the amount of land required for the facility, which would extend over some 250 mi. sq., the configuration of the land to be acquired was tailored to the requirements for radiation containment below the levels of the guideline

  12. Development of Gene Expression Signatures for Practical Radiation Biodosimetry

    International Nuclear Information System (INIS)

    Paul, Sunirmal; Amundson, Sally A.

    2008-01-01

    Purpose: In a large-scale radiologic emergency, estimates of exposure doses and radiation injury would be required for individuals without physical dosimeters. Current methods are inadequate for the task, so we are developing gene expression profiles for radiation biodosimetry. This approach could provide both an estimate of physical radiation dose and an indication of the extent of individual injury or future risk. Methods and Materials: We used whole genome microarray expression profiling as a discovery platform to identify genes with the potential to predict radiation dose across an exposure range relevant for medical decision making in a radiologic emergency. Human peripheral blood from 10 healthy donors was irradiated ex vivo, and global gene expression was measured both 6 and 24 h after exposure. Results: A 74-gene signature was identified that distinguishes between four radiation doses (0.5, 2, 5, and 8 Gy) and controls. More than one third of these genes are regulated by TP53. A nearest centroid classifier using these same 74 genes correctly predicted 98% of samples taken either 6 h or 24 h after treatment as unexposed, exposed to 0.5, 2, or ≥5 Gy. Expression patterns of five genes (CDKN1A, FDXR, SESN1, BBC3, and PHPT1) from this signature were also confirmed by real-time polymerase chain reaction. Conclusion: The ability of a single gene set to predict radiation dose throughout a window of time without need for individual pre-exposure controls represents an important advance in the development of gene expression for biodosimetry

  13. RD50 Collaboration overview: Development of new radiation hard detectors

    Energy Technology Data Exchange (ETDEWEB)

    Kuehn, S., E-mail: susanne.kuehn@cern.ch

    2016-07-11

    Silicon sensors are widely used as tracking detectors in high energy physics experiments. This results in several specific requirements like radiation hardness and granularity. Therefore research for highly performing silicon detectors is required. The RD50 Collaboration is a CERN R&D collaboration dedicated to the development of radiation hard silicon devices for application in high luminosity collider experiments. Extensive research is ongoing in different fields since 2001. The collaboration investigates both defect and material characterization, detector characterization, the development of new structures and full detector systems. The report gives selected results of the collaboration and places an emphasis on the development of new structures, namely 3D devices, CMOS sensors in HV technology and low gain avalanche detectors. - Highlights: • The RD50 Collaboration is a CERN R&D collaboration dedicated to the development of radiation hard silicon devices for high luminosity collider experiments. • The collaboration investigates defect, material and detector characterization, the development of new structures and full detector systems. • Results of measured data of n-in-p type sensors allow recommendations for silicon tracking detectors at the HL-LHC. • The charge multiplication effect was investigated to allow its exploitation and resulted in new structures like LGAD sensors. • New sensor types like slim and active edge sensors, 3D detectors, and lately HVCMOS devices were developed in the active collaboration.

  14. Developments of radiation safety requirements for the management of radiation devices

    International Nuclear Information System (INIS)

    Lee, Hee Seock; Choi, Jin Ho; Cheong, Yuon Young

    2002-03-01

    The approach of the risk-informed regulatory options was studied to develop the radiation safety requirements for the managements for radiation devices. The task analysis, exposure, accident scenario development, risk analysis, and systematic approach for regulatory options was considered in full, based on the NRC report, 'NUREG/CR-6642', and the translation of its core part was conducted for ongoing research. In this methodology, the diamond tree that includes human factors, etc, additionally with normal event tree, was used. According to the analysis results of this approach, the risk analysis and the development of regulatory options were applied for the electron linear accelerators and the qualitative results were obtained. Because the field user groups were participated in this study could contribute to the basis establishment of the risk-informed regulation policy through securing consensus and inducing particle interests. It will make an important role of establishing the detail plan of ongoing research

  15. Developments of radiation safety requirements for the management of radiation devices

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hee Seock [Pohang Accelerator Lab, Pohang (Korea, Republic of); Choi, Jin Ho [Gachun University of Medicine and science, Incheon (Korea, Republic of); Cheong, Yuon Young [Asan Medical Center, Seoul (Korea, Republic of)] (and others)

    2002-03-15

    The approach of the risk-informed regulatory options was studied to develop the radiation safety requirements for the managements for radiation devices. The task analysis, exposure, accident scenario development, risk analysis, and systematic approach for regulatory options was considered in full, based on the NRC report, 'NUREG/CR-6642', and the translation of its core part was conducted for ongoing research. In this methodology, the diamond tree that includes human factors, etc, additionally with normal event tree, was used. According to the analysis results of this approach, the risk analysis and the development of regulatory options were applied for the electron linear accelerators and the qualitative results were obtained. Because the field user groups were participated in this study could contribute to the basis establishment of the risk-informed regulation policy through securing consensus and inducing particle interests. It will make an important role of establishing the detail plan of ongoing research.

  16. Recent developments in the field of radiation processing

    International Nuclear Information System (INIS)

    Andrzej, G. Chmielewski

    2006-01-01

    Full text: Radiation has been discovered more than one hundred years ago. Since than, properties of radiation to modify physico-chemical properties of materials have found many applications. Radiation technologies applying gamma sources and electron accelerators for material processing are well established processes. There are over 160 gamma industrial irradiators and 1300 electron industrial accelerators in operation worldwide. They are being widely used for sterilization, food irradiation and polymer processing. New developments in the field of radiation sources engineering are compact size gamma irradiators, high power electron accelerators (medium energy range) for environmental applications and other types (high energy range) for materials' processing, with direct e-/X conversion. Future applications of low energy, inexpensive EB processing systems are foreseen. Electron beam lithography for microelectronics is a well-established technique. The already tested e-/X system equipped in an accelerator of 700 kW power opens new horizons for this kind of application. The developments described above need introduction of new computational methods that facilitate prediction of dose distribution, even in containers filled with complex products of varying densities. This technique provides good solutions for homeland security applications which may be complemented by mobile system applications. Technologies to be developed besides environmental applications could be nano materials, structure engineered materials (sorbents, the composites, ordered polymers, etc.) and natural polymers' processing. New products based on radiation processed polysaccharides have already been commercialized in many countries of the East Asia and Pacific Region, especially in those being rich in natural polymers. Very important and promising applications concern environment protection - radiation technology being a clean and environment friendly process, helps to curb pollutants' emission as

  17. The Academic Curriculum of Medical Radiation Technologists: Continuous Development

    International Nuclear Information System (INIS)

    Sergieva, K.; Gagova, P.; Bonninska, N.

    2016-01-01

    Full text: The purpose is to present the activities of Department of Radiation technologists at Medical College Sofia in knowledge management (KM) in human health applications and namely: continuous development of academic curriculum (AC) for medical radiation technologists (MRT) in sense of the conference motto “Nuclear Knowledge Management: Challenges and Approaches”. Our challenge is to realize, in practice, the important role of MRT professionals in healthcare. They are the front line in the patient safety and the last person with the patient before exposure. The existing AC has been periodically peer-reviewed: in 2011, 2014, and ongoing reviews, with the aim to guarantee that we are providing knowledge, skills and competencies that meet modern requirements for the training of radiation technologists. The AC compromises both academic and clinical education. The clinical component occurs throughout the academic course, accenting the role of MRT in radiology, radiotherapy and nuclear medicine. The approach of continuously developing the AC will meet the stringent requirements recently published by IAEA, with the goal that radiological medical practitioners, medical physicists, medical radiation technologists and other health professionals with specific duties in relation to protection and safety for patients in a given radiological procedure are specialized in the appropriate area. (author

  18. New developments and trends in radiation chemistry applications

    International Nuclear Information System (INIS)

    Gueven, O.

    2002-01-01

    Complete text of publication follows. This paper attempts to review the recent developments in the application of ionizing radiation in various industrial processes. Modification of structure and properties of polymeric materials of both synthetic and natural origin has been the leading field benefiting from unique advantages of high-energy radiation. The developments recently achieved in this highly industries area includes polymer composite production, micro-device production, surface curing and modification, preparation of membranes, adsorbents, controlled degradation, recycling of plastics. Health-care industries continue to benefit from radiation technology in the production of health-care aids, decontamination and sterilization of pharmaceuticals in addition to well-accepted sterilization of implants and single-use medical devices. Radiation processing continues to find growing use in mitigating environmental problems ranging from removal of persistent organic pollutants from gaseous and aqueous effluents to destruction of biohazardous compounds. Some of the new technological innovations and R and D activities in above-mentioned applications will be briefly described

  19. Brain tumors and synchrotron radiation: Methodological developments in quantitative brain perfusion imaging and radiation therapy

    International Nuclear Information System (INIS)

    Adam, Jean-Francois

    2005-01-01

    High-grade gliomas are the most frequent type of primary brain tumors in adults. Unfortunately, the management of glioblastomas is still mainly palliative and remains a difficult challenge, despite advances in brain tumor molecular biology and in some emerging therapies. Synchrotron radiation opens fields for medical imaging and radiation therapy by using monochromatic intense x-ray beams. It is now well known that angiogenesis plays a critical role in the tumor growth process and that brain perfusion is representative of the tumor mitotic activity. Synchrotron radiation quantitative computed tomography (SRCT) is one of the most accurate techniques for measuring in vivo contrast agent concentration and thus computing precise and accurate absolute values of the brain perfusion key parameters. The methodological developments of SRCT absolute brain perfusion measurements as well as their preclinical validation are detailed in this thesis. In particular, absolute cerebral volume and blood brain barrier permeability high-resolution (pixel size 2 ) parametric maps were reported. In conventional radiotherapy, the treatment of these tumors remains a delicate challenge, because the damages to the surrounding normal brain tissue limit the amount of radiation that can be delivered. One strategy to overcome this limitation is to infuse an iodinated contrast agent to the patient during the irradiation. The contrast agent accumulates in the tumor, through the broken blood brain barrier, and the irradiation is performed with kilovoltage x rays, in tomography mode, the tumor being located at the center of rotation and the beam size adjusted to the tumor dimensions. The dose enhancement results from the photoelectric effect on the heavy element and from the irradiation geometry. Synchrotron beams, providing high intensity, tunable monochromatic x rays, are ideal for this treatment. The beam properties allow the selection of monochromatic irradiation, at the optimal energy, for a

  20. Development, Implementation and Compliance of Treatment Pathways in Radiation Medicine

    Directory of Open Access Journals (Sweden)

    Louis ePotters

    2013-05-01

    Full Text Available INTRODUCTION: While much emphasis on safety in the radiation oncology clinic is placed on process, there remains considerable opportunity to increase safety, enhance outcomes and avoid ad-hoc care by instituting detailed treatment pathways. The purpose of this study was to review the process of developing evidence and consensus-based, outcomes-oriented treatment pathways that standardize treatment and patient management in a large multicenter radiation oncology practice. Further, we reviewed our compliance in incorporating these directives into our day-to-day clinical practice. METHODS: Using the Institute of Medicine guideline for developing treatment pathways, 87 disease specific pathways were developed and incorporated into the electronic medical system in our multi-facility radiation oncology department. Compliance in incorporating treatment pathways was assessed by mining our EMR data from January 1, 2010 through February 2012 for patients with breast and prostate cancer. RESULTS: This retrospective analysis of data from electronic medical records found overall compliance to breast and prostate cancer treatment pathways to be 97% and 99%, respectively. The reason for non-compliance proved to be either a failure to complete the prescribed care based on grade II or III toxicity (n=1 breast, 3 prostate or patient elected discontinuance of care (n=1 prostate or the physician chose a higher dose for positive/close margins (n=3 breast. CONCLUSION: This study demonstrates that consensus and evidence-based treatment pathways can be developed and implemented in a multi-center department of radiation oncology. And that for prostate and breast cancer there was a high degree of compliance using these directives. The development and implementation of these pathways serve as a key component of our safety program, most notably in our effort to facilitate consistent decision-making and reducing variation between physicians.

  1. Development of radiation biological dosimetry and treatment of radiation-induced damaged tissue

    International Nuclear Information System (INIS)

    Cho, Chul Koo; Kim, Tae Hwan; Lee, Yun Sil

    2000-04-01

    Util now, only a few methods have been developed for radiation biological dosimetry such as conventional chromosome aberration and micronucleus in peripheral blood cell. However, because these methods not only can be estimated by the expert, but also have a little limitation due to need high technique and many times in the case of radiation accident, it is very difficult to evaluate the absorbed dose of victims. Therefore, we should develop effective, easy, simple and rapid biodosimetry and its guideline(triage) to be able to be treated the victims as fast as possible. We established the apoptotic fragment assay, PCC, comet assay, and micronucleus assay which was the significant relationship between dose and cell damages to evaluate the irradiated dose as correct and rapid as possible using lymphocytes and crypt cells, and compared with chromosome dosimetry and micronucleus assay

  2. Development of radiation biological dosimetry and treatment of radiation-induced damaged tissue

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Chul Koo; Kim, Tae Hwan; Lee, Yun Sil [and others

    2000-04-01

    Util now, only a few methods have been developed for radiation biological dosimetry such as conventional chromosome aberration and micronucleus in peripheral blood cell. However, because these methods not only can be estimated by the expert, but also have a little limitation due to need high technique and many times in the case of radiation accident, it is very difficult to evaluate the absorbed dose of victims. Therefore, we should develop effective, easy, simple and rapid biodosimetry and its guideline(triage) to be able to be treated the victims as fast as possible. We established the apoptotic fragment assay, PCC, comet assay, and micronucleus assay which was the significant relationship between dose and cell damages to evaluate the irradiated dose as correct and rapid as possible using lymphocytes and crypt cells, and compared with chromosome dosimetry and micronucleus assay.

  3. Development of a radiation protection competency framework, a consultancies perspective

    International Nuclear Information System (INIS)

    Bryant, P A

    2016-01-01

    The UK nuclear industry is suffering heightened concerns of a skills gap. This has led to companies, and in particular consultancies recruiting increasing numbers of graduates and less experienced staff. The following paper provides an overview of an approach to developing a radiation protection based competency framework within a consultancy with the aim of supporting the identification of the required initiatives to support the development of staff, their careers, and the profession. It is hoped this will provide useful guidance for organisations that are embarking on establishing a training and development programme. (paper)

  4. The development of radiation hardened robot for nuclear facility

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seung Ho; Jung, Seung Ho; Kim, Byung Soo and others

    2000-04-01

    The work conducted in this stage covers development of core technology of tele-robot system including monitoring technique in high-level radioactive area, tele-sensing technology and radiation-hardened technology for the non-destructive tele-inspection system which monitors the primary coolant system during the normal operations of PHWR(Pressurized Heavy Water Reactor) NPPs and measures the decrease of bending part of feeder pipe during overall. Based on the developed core technology, the monitoring mobile robot system of the primary coolant system and the feeder pipe inspecting robot system are developed.

  5. The development of radiation hardened robot for nuclear facility

    International Nuclear Information System (INIS)

    Kim, Seung Ho; Jung, Seung Ho; Kim, Byung Soo and others

    2000-04-01

    The work conducted in this stage covers development of core technology of tele-robot system including monitoring technique in high-level radioactive area, tele-sensing technology and radiation-hardened technology for the non-destructive tele-inspection system which monitors the primary coolant system during the normal operations of PHWR(Pressurized Heavy Water Reactor) NPPs and measures the decrease of bending part of feeder pipe during overall. Based on the developed core technology, the monitoring mobile robot system of the primary coolant system and the feeder pipe inspecting robot system are developed

  6. Induction, development, and inhibition of radiation-induced macrobodies

    International Nuclear Information System (INIS)

    Adam, W.J.; Grunewald, R.

    1975-01-01

    Coleus shoots were exposed to 100,000 R of γ radiation and the fine structure of the apical meristems was examined. Meristems were fixed at various postirradiation times. An ultrastructural body was found associated with irradiated tissue, bound by a single membrane, containing dense osmiophilic bodies, and usually associated with radiation-induced vacuoles. The development of these new bodies, and the effects of both dose rate and light during the postirradiation period on their development were examined. Reduction of the dose rate by a factor of two inhibited the formation of these macrobodies through the 24 hour postirradiation period. Meristems kept in the dark during the 24 hour postirradiation period had macrobodies similar in form to the macrobodies from the meristems of the 16 hour postirradiation period which were exposed to light. Superlethal doses were used to achieve these results. Similarities between our results and those achieved with lower lethal doses are discussed

  7. Development of Drugs and Technology for Radiation Theragnosis

    Directory of Open Access Journals (Sweden)

    Hwan-Jeong Jeong

    2016-06-01

    Full Text Available Personalized medicine is tailored medical treatment that targets the individual characteristics of each patient. Theragnosis, combining diagnosis and therapy, plays an important role in selecting appropriate patients. Noninvasive in vivo imaging can trace small molecules, antibodies, peptides, nanoparticles, and cells in the body. Recently, imaging methods have been able to reveal molecular events in cells and tissues. Molecular imaging is useful not only for clinical studies but also for developing new drugs and new treatment modalities. Preclinical and early clinical molecular imaging shows biodistribution, pharmacokinetics, mechanisms of action, and efficacy. When therapeutic materials are labeled using radioisotopes, nuclear imaging with positron emission tomography or gamma camera can be used to treat diseases and monitor therapy simultaneously. Such nuclear medicine technology is defined as radiation theragnosis. We review the current development of drugs and technology for radiation theragnosis using peptides, albumin, nanoparticles, and cells.

  8. Development of Graves' disease following radiation therapy in Hodgkin's disease

    International Nuclear Information System (INIS)

    Loeffler, J.S.; Tarbell, N.J.; Garber, J.R.; Mauch, P.

    1988-01-01

    Radiation-related thyroid dysfunction is a common occurrence in patients with Hodgkin's disease treated with mantle field radiation. Although chemical and clinical hypothyroidism are most commonly seen, Graves' disease has also been described. We have examined the records of 437 surgically staged patients who received mantle field irradiation between April 1969 and December 1980 to ascertain the frequency of manifestations of Graves' disease. Within this group, seven patients developed hyperthyroidism accompanied by ophthalmic findings typical of those seen in Graves' disease. The actuarial risk of developing Graves' disease at 10 years following mantle irradiation for Hodgkin's disease was 3.3% in female patients and 1% in male patients in this study. The observed/expected ratios were 5.9 and 5.1 for female and male patients, respectively. This observed risk significantly exceeded that seen in the general population

  9. Development of drugs and technology for radiation theragnosis

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Hwan Jeong [Dept. of Nuclear Medicine, Biomedical Research Institute, Chonbuk National University Medical School and Hospital, Jeonju (Korea, Republic of); Lee, Byung Chul [Dept. of Nuclear Medicine, Seoul National University College of Medicine, Seoul National University Bundang Hospital, Sungnam (Korea, Republic of); Ahn, Byeong Cheol [Dept. of Nuclear Medicine, Kyungpook National University School of Medicine and Hospital, Daegu (Korea, Republic of); Kang, Keon Wook [Dept. of Nuclear Medicine and Cancer Research Institute, Seoul National University, Seoul (Korea, Republic of)

    2016-06-15

    Personalized medicine is tailored medical treatment that targets the individual characteristics of each patient. Theragnosis, combining diagnosis and therapy, plays an important role in selecting appropriate patients. Noninvasive in vivo imaging can trace small molecules, antibodies, peptides, nanoparticles, and cells in the body. Recently, imaging methods have been able to reveal molecular events in cells and tissues. Molecular imaging is useful not only for clinical studies but also for developing new drugs and new treatment modalities. Preclinical and early clinical molecular imaging shows biodistribution, pharmacokinetics, mechanisms of action, and efficacy. When therapeutic materials are labeled using radioisotopes, nuclear imaging with positron emission tomography or gamma camera can be used to treat diseases and monitor therapy simultaneously. Such nuclear medicine technology is defined as radiation theragnosis. We review the current development of drugs and technology for radiation theragnosis using peptides, albumin, nanoparticles, and cells.

  10. The role of the international radiation protection association in development and implementation of radiation protection standards

    International Nuclear Information System (INIS)

    Metcalf, P.; Lochard, J.; Webb, G.

    2002-01-01

    The International Radiation Protection Association (IRPA) is an affiliation of national and regional professional societies. Its individual membership is approaching some 20 000 professionals from 42 societies and covering 50 countries. Its primary objective is to provide a platform for collaboration between members of its affiliate societies to further radiation protection and safety. The IRPA is mandated to promote and facilitate the establishment of radiation protection societies, support international meetings and to encourage international publications, research and education and the establishment and review of standards. Through its membership base and its observer status on bodies such as the ICRP and the safety standards committees of the IAEA, the IRPA is in a position to provide valuable input to the safety standards development process. This factor has been increasingly recognised more recently within the IRPA and the various organisations involved in the development of safety standards. This paper addresses the mechanisms that have been established to enhance the input of the IRPA into the safety standards development process and for their subsequent implementation. (author)

  11. Development of Functional Foods for Body Protection Using Radiation

    Energy Technology Data Exchange (ETDEWEB)

    Jo, S. K.; Jung, U. H.; Park, H. R.

    2007-07-15

    We have previously developed two herbal compositions(HemoHIM, HemoTonic) that protects immune/hematopoietic system and self-renewal tissues against radiation and enhances immune/hematopoietic functions. In this study, we tried to expand its usability by verifying its protective activity against various harmful stimuli as well as radiation. HemoHIM was shown to be highly effective in reducing immune/hematopoietic damage, particularly, normalizing the Th1/Th2 imbalance, which seemed to be a result of increased production of IL-12p70 by APC and enhanced NK cell activity. Also HemoHIM was shown to have protective activities against UV-induced skin damage, immune system damage by an anticancer drug (CP), immune depression by old age and stress, and inflammation. Finally it was confirmed in a human study that HemoHIM improves the immune cell functions and cytokine production. Based on these results, HemoHIM has been approved as a health functional food for immunomodulation by Korea FDA and succeeded in its industrialization. Meanwhile, to develop functional foods for the reduction of chronic radiation damage (carcinogenesis), we have screened natural products for inhibitory activities against carcinogenesis-related factors, and developed two anti-carcinogenic compositions. Also 6 single compounds were isolated and identified from radioprotective natural products and elucidated some synergistic protection by several single compounds and established a basis for the development of advanced technology for radioprotection. Also, to obtain the applicability of radiation technology for the safe sanitatation and distribution of functional food materials, we verified the toxicological safety, stability of activity and active components of irradiated medicinal herbs

  12. Portable radiation meters developed in Boris Kidric Institute

    International Nuclear Information System (INIS)

    Sobajic, V.; Smelcerovic, M.

    1989-01-01

    Portable meters designed for X and gamma radiation measurements and beta detection are described. An instrument using ionization chamber is developed with new type of electrometer amplifier. It is designed for precise and reliable exposure and exposure rate measurements. Another instrument with GM counters covers 8 linear ranges: from background up to 10 Sv/h. Some specific solutions and basic measurement characteristics of these instruments are presented (author)

  13. Development of Functional Foods for Body Protection Using Radiation

    International Nuclear Information System (INIS)

    Jo, S. K.; Jung, U. H.; Park, H. R.

    2007-07-01

    We have previously developed two herbal compositions(HemoHIM, HemoTonic) that protects immune/hematopoietic system and self-renewal tissues against radiation and enhances immune/hematopoietic functions. In this study, we tried to expand its usability by verifying its protective activity against various harmful stimuli as well as radiation. HemoHIM was shown to be highly effective in reducing immune/hematopoietic damage, particularly, normalizing the Th1/Th2 imbalance, which seemed to be a result of increased production of IL-12p70 by APC and enhanced NK cell activity. Also HemoHIM was shown to have protective activities against UV-induced skin damage, immune system damage by an anticancer drug (CP), immune depression by old age and stress, and inflammation. Finally it was confirmed in a human study that HemoHIM improves the immune cell functions and cytokine production. Based on these results, HemoHIM has been approved as a health functional food for immunomodulation by Korea FDA and succeeded in its industrialization. Meanwhile, to develop functional foods for the reduction of chronic radiation damage (carcinogenesis), we have screened natural products for inhibitory activities against carcinogenesis-related factors, and developed two anti-carcinogenic compositions. Also 6 single compounds were isolated and identified from radioprotective natural products and elucidated some synergistic protection by several single compounds and established a basis for the development of advanced technology for radioprotection. Also, to obtain the applicability of radiation technology for the safe sanitatation and distribution of functional food materials, we verified the toxicological safety, stability of activity and active components of irradiated medicinal herbs

  14. Development of infrared communication in radiation protection and monitoring

    International Nuclear Information System (INIS)

    Thakur, Vaishali M.; Choithramani, S.J.; Sharma, D.N.; Abani, M.C.

    2003-01-01

    Infra-red communication has many important applications in instrumentation and control. Different types of nuclear instruments are used for radiation protection and surveillance program. The application of this mode of communication in these instruments helps in monitoring of inaccessible or high radiation field areas by avoiding undue exposure to the occupational worker. The demand for remotely controlled monitoring instruments and wireless data communication in the mobile computing environment has rapidly increased. This is due to the increasing need for on-line radiological data analysis with minimum human interventions, especially so if the monitoring is in hazardous environment. The wireless communication can be achieved using different communication methodology for short and long range communication. The infrared based communication is used for different applications for short range up to 9-10 meters. The use of this mode of communication has been implemented in some of the radiation monitoring instruments developed in house. The evaluation of data communication using this mode was conducted for the systems like Environmental Radiation Monitor (ERM) and results showed that data communication error is less than 0.1% up to 10 meter distance. (author)

  15. Research and development on radiation processing in Sri Lanka

    International Nuclear Information System (INIS)

    Kulatunge, S.S.; Motha, L.; Sultanbawa, Y.; Malavipathirana, S.; Silva, A de; Nanayakkara, S.; Hewajulige, I.G.N.; Silva, K.R.C de

    2008-01-01

    Research on radiation processing of natural polymer such as polysaccharides of chitosan, cellulose, carrageenan has been carried out in Sri Lanka since the year 2004. The research group have been involving in development activities on application of chitin and chitosan for wound dressing, irradiated chitosan on shelf life extension of fruits such as papaya, banana, mangoes, radiation crosslinked super-absorbent hydrogel from sodium carboxymethyl cellulose by radiation processing. Hydrogels prepared with PVA/Carrageenan/Agar has been studied on guinea pigs to determine the wound healing effect. Irradiated chitosan powder and chitosan solution was studied in vitro and found chitosan solution (1%) directly subjected to irradiation dosages even at 5 kGy was highly effective in control of anthracnose causing organism of papaya. In vivo studies with irradiated 1% chitosan solution on Rathana and red lady variety of papaya shows better control of spoilage of papaya to a considerable extent. The government of Sri Lanka (Ministry of Science and Technology and Atomic Energy Authority) is in the process of establishing the first government owned Multipurpose Gamma Irradiation Facility and it will be helpful to transfer the output of R and D in radiation processing. (author)

  16. Development of ITER diagnostics: Neutronic analysis and radiation hardness

    Energy Technology Data Exchange (ETDEWEB)

    Vukolov, Konstantin, E-mail: vukolov_KY@nrcki.ru; Borisov, Andrey; Deryabina, Natalya; Orlovskiy, Ilya

    2015-10-15

    Highlights: • Problems of ITER diagnostics caused by neutron radiation from hot DT plasma considered. • Careful neutronic analysis is necessary for ITER diagnostics development. • Effective nuclear shielding for ITER diagnostics in the 11th equatorial port plug proposed. • Requirements for study of radiation hardness of diagnostic elements defined. • Results of optical glasses irradiation tests in a fission reactor given. - Abstract: The paper is dedicated to the problems of ITER diagnostics caused by effects of radiation from hot DT plasma. An effective nuclear shielding must be arranged in diagnostic port plugs to meet the nuclear safety requirements and to provide reliable operation of the diagnostics. This task can be solved with the help of neutronic analysis of the diagnostics environment within the port plugs at the design stage. Problems of neutronic calculations are demonstrated for the 11th equatorial port plug. The numerical simulation includes the calculations of neutron fluxes in the port-plug and in the interspace. Options for nuclear shielding, such as tungsten collimator, boron carbide and water moderators, stainless steel and lead screens are considered. Data on neutron fluxes along diagnostic labyrinths allow to define radiation hardness requirements for the diagnostic components and to specify their materials. Options for windows and lenses materials for optical diagnostics are described. The results of irradiation of flint and silica glasses in nuclear reactor have shown that silica KU-1 and KS-4V retain transparency in visible range after neutron fluence of 10{sup 17} cm{sup −2}. Flints required for achromatic objectives have much less radiation hardness about 5 × 10{sup 14} n/cm{sup 2}.

  17. Radiation

    International Nuclear Information System (INIS)

    2013-01-01

    The chapter one presents the composition of matter and atomic theory; matter structure; transitions; origin of radiation; radioactivity; nuclear radiation; interactions in decay processes; radiation produced by the interaction of radiation with matter

  18. Development and anneal of radiation damage in salt

    International Nuclear Information System (INIS)

    Garcia Celma, A.; Donker, H.; Soppe, W.J.; Miralles, L.

    1993-12-01

    Laboratory gamma-irradiations at a constant temperature (100 C) were carried out in two sorts of experiments, one at variable and another at approximately constant dose rates. The damage developed during irradiation was analyzed by thermal analysis, microstructural analysis and small angle neutron scattering. The results were compared with the yields of the Jain-Lidiard model for each experiment. Experiments at a constant dose rate were planned to obtain information on radiation damage development and anneal in conditions as near as possible to those of radioactive waste repository concepts. For this reason the dose rates were kept low. (orig./DG)

  19. Mechanistic models for cancer development after short time radiation exposure

    International Nuclear Information System (INIS)

    Kottbauer, M. M.

    1997-12-01

    In this work two biological based models were developed. First the single-hit model for solid tumors (SHM-S) and second the single-hit model for leukemia (SHM-L). These models are a further development of the Armitage-Doll model for the special case of a short time radiation exposure. The basis of the models is the multistage process of carcinogeneses. The single-hit models provide simultaneously the age-dependent cancer-rate of spontaneous and radiation induced tumors as well as the dose-effect relationships at any age after exposure. The SHM-S leads to a biological based dose-effect relationship, which is similar to the relative risk model suggested by the ICRP 60. The SHM-S describes the increased mortality rate of the bomb survivors more accurate than the relative risk model. The SHM-L results in an additive dose-effect relationship. It is shown that only small differences in the derivation of the two models lead to the two dose-effect relationships. Beside the radiation exposure the new models consider the decrease of the cancer mortality rate at higher ages (age>75) which can be traced back mainly to three causes: competitive causes of death, reduction of cell proliferation and reduction of risk groups. The single-hit models also consider children cancer, the different rates of incidence and mortality, influence of the immune system and the cell-killing effect. (author)

  20. High vulnerability of the developing brain to ionizing radiation

    International Nuclear Information System (INIS)

    Inouye, Minoru

    1991-01-01

    The developing mammalian brain is highly susceptible to environmental teratogenic insults, because of its long-lasting sensitive period extending from the beginning of embryonic organogenesis to the postnatal infantile period, the great vulnerability of undifferentiated neural cells to wide range of environmental agents including ionizing radiation, and the lack of further reproductive capacity of neurons. Disturbances in the production of neurons, and their migration to the cerebral and cerebellar cortices, give rise to malformations of the brain, such as an absent corpus callosum, disorganized cortical architecture, abnormal fissuring of the cerebral and cerebellar hemispheres, heterotopic cortical gray matter, ectopic cerebellar granule cells, microcephaly, etc. The critical developmental stage for the induction of histogenetic disorders of the cerebral cortex in humans is 8 weeks of pregnancy and following some weeks. This corresponds to day 13 of pregnancy for mice and day 15 for rats, i.e., the ventricular cells of fetal telencephalon are most susceptible to radiation-induced cell death in this stage of development. The lowest doses of X- and gamma-radiations which induce detectable biological effects in rats and mice are around 0.02 Gy in increasing acute cell death. Reduced brain weight and abnormal dendritic arborization are induced by 0.25 Gy and more. Histological abnormalities are produced by 0.5 Gy and more, and microcephaly and cerebellar malformations are by 1 Gy and more. (author)

  1. Possibility of radiation application to development of substitute energy

    International Nuclear Information System (INIS)

    Kaetsu, Isao

    1980-01-01

    Interest in the technique utilizing biomass is growing as one of the alternate energies to be developed accompanying the advance of chronic, long-lasting oil crisis, and its investigation has begun as a national project in respective government offices. Biomass is essentially equal to the amount of vegetable resources composed of the raw materials of cellulose and starch groups. The authors made some consideration on the contribution of radiation to the saccharification and fermentation of cellulose. First, the trend of the technique for utilizing cellulose resources is reported, and next, the utilization of radiation to the preliminary treatment of cellulose raw material and the technique for fixing enzymes and bacteria with radiation and its application to the development of resources are described. Finally, the saccharification of cellulose resources with fixed enzymes and bacteria is described. Although it is difficult at the present stage to make full economical comparison among various saccharification methods, according to the calculation made by the authors, in the comparison of the UC method by Wilke and others (mechanical crushing - saccharification of enzymatic aqueous solution) with the method introducing the fixation technique (preliminary irradiation - saccharification by fixed enzymes), the saccharifying cost is 6.56 cents/pound in case of the former, and 4.53 cents/pound in case of the latter. Since the technique is not established in many points, it is desired to improve efficiency by simplifying the pretreatment, saccharification and fermentation processes as far as possible. (Wakatsuki, Y.)

  2. Development of a radiative divertor for DIII-D

    International Nuclear Information System (INIS)

    Allen, S.L.; Brooks, N.H.; Campbell, R.B.; Fenstermacher, M.E.; Hill, D.N.; Hyatt, A.W.; Knoll, D.; Lasnier, C.J.; Lazarus, E.A.; Leonard, A.W.; Lippmann, S.I.; Mahdavi, M.A.; Maingi, R.; Meyer, W.; Moyer, R.A.; Petrie, T.W.; Porter, G.D.; Rensink, M.E.; Rognlien, T.D.; Schaffer, M.J.; Smith, J.P.; Staebler, G.M.; Stambaugh, R.D.; West, W.P.; Wood, R.D.

    1995-01-01

    We have used experiments and modeling to develop a new radiative divertor configuration for DIII-D. Gas puffing experiments with the existing open divertor have shown the creation of a localized ( similar 10 cm diameter) radiation zone which results in substantial reduction (3-10) in the divertor heat flux while τ E remains similar 2 times ITER-89P scaling. However, n e increases with D 2 puffing, and Z eff increases with neon puffing. Divertor structures are required to minimize the effects on the core plasma. The UEDGE fluid code, benchmarked with DIII-D data, and the DEGAS neutrals transport code are used to estimate the effectiveness of divertor configurations; slots reduce the core ionization more than baffles. The overall divertor shape is set by confinement studies which indicate that high triangularity (δ∼0.8) is important for high τ E VH-modes. Results from engineering feasibility studies, including diagnostic access, will be presented. ((orig.))

  3. Radiation application on development of marker genes for genetic manipulation

    International Nuclear Information System (INIS)

    Lee, Young Il

    1997-04-01

    This state of art report was dealt with the recent progress of genetic engineering techniques and prospect of gene manipulation. Especially the selection of new genetic marker genes such as variants to environmental stress, pest or insect resistance, herbicide resistance and nutritional requirement was reviewed by using plant cell and tissue culture combined with radiation mutation induction. Biotechnology has taken us from the era hybrid plants to the era of transgenic plants. Although there are still many problems to solve in transformation method and the regeneration of transformed cell and tissue. Genetic marker genes are very important material to improve the technique of genetic manipulation. Most of the genes have been developed by radiation. (author). 180 refs., 6 tabs

  4. Radiation shielding technology development for proton linear accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yong Ouk; Lee, Y. O.; Cho, Y. S. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Kim, M. H.; Sin, M. W.; Park, B. I. [Kyunghee Univ., Seoul (Korea, Republic of)] [and others

    2005-09-01

    This report was presented as an output of 2-year project of the first phase Proton Engineering Frontier Project(PEFP) on 'Radiation Shielding Technology Development for Proton Linear Accelerator' for 20/100 MeV accelerator beam line and facility. It describes a general design concept, provision and update of basic design data, and establishment of computer code system. It also includes results of conceptual and preliminary designs of beam line, beam dump and beam facilities as well as an analysis of air-activation inside the accelerator equipment. This report will guides the detailed shielding design and production of radiation safety analysis report scheduled in the second phase project.

  5. Development of Food Preservation and Processing Technologies by Radiation Technology

    International Nuclear Information System (INIS)

    Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun

    2007-07-01

    To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

  6. Development of Food Preservation and Processing Technologies by Radiation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun [and others

    2007-07-15

    To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

  7. Development of Food Preservation and Processing Technologies by Radiation Technology

    Energy Technology Data Exchange (ETDEWEB)

    Byun, Myung Woo; Lee, Ju Won; Kim, Jae Hun (and others)

    2007-07-15

    To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following: As the first cooperative venture business technically invested by National Atomic Research Development Project, institute/company's [technology-invested technology foundation No. 1] cooperative venture, Sun-BioTech Ltd., was founded and stated its business. This suggested new model for commercialization and industrialization of the research product by nation-found institute. From the notice of newly approved product list about irradiated food, radiation health related legal approval on 7 food items was achieved from the Ministry of health and wellfare, the Korea Food and Drug Administration, and this contributed the foundation of enlargement of practical use of irradiated food. As one of the foundation project for activation of radiation application technology for the sanitation and secure preservation of special food, such as military meal service, food service for patient, and food for sports, and instant food, such as ready-to-eat/ready-to-cook food, the proposal for radiation application to the major military commander at the Ministry of National Defence and the Joint Chiefs of Staff was accepted for the direction of military supply development in mid-termed plan for the development of war supply. Especially, through the preliminary research and the development of foundation technology for the development of the Korean style space food and functional space food, space Kimch with very long shelf life was finally developed. The development of new item/products for food and life science by combining RT/BT, the development of technology for the elimination/reduction of

  8. Developing the radiation protection safety culture in the UK.

    Science.gov (United States)

    Cole, P; Hallard, R; Broughton, J; Coates, R; Croft, J; Davies, K; Devine, I; Lewis, C; Marsden, P; Marsh, A; McGeary, R; Riley, P; Rogers, A; Rycraft, H; Shaw, A

    2014-06-01

    In the UK, as elsewhere, there is potential to improve how radiological challenges are addressed through improvement in, or development of, a strong radiation protection (RP) safety culture. In preliminary work in the UK, two areas have been identified as having a strong influence on UK society: the healthcare and nuclear industry sectors. Each has specific challenges, but with many overlapping common factors. Other sectors will benefit from further consideration.In order to make meaningful comparisons between these two principal sectors, this paper is primarily concerned with cultural aspects of RP in the working environment and occupational exposures rather than patient doses.The healthcare sector delivers a large collective dose to patients each year, particularly for diagnostic purposes, which continues to increase. Although patient dose is not the focus, it must be recognised that collective patient dose is inevitably linked to collective occupational exposure, especially in interventional procedures.The nuclear industry faces major challenges as work moves from operations to decommissioning on many sites. This involves restarting work in the plants responsible for the much higher radiation doses of the 1960/70s, but also performing tasks that are considerably more difficult and hazardous than those original performed in these plants.Factors which influence RP safety culture in the workplace are examined, and proposals are considered for a series of actions that may lead to an improvement in RP culture with an associated reduction in dose in many work areas. These actions include methods to improve knowledge and awareness of radiation safety, plus ways to influence management and colleagues in the workplace. The exchange of knowledge about safety culture between the nuclear industry and medical areas may act to develop RP culture in both sectors, and have a wider impact in other sectors where exposures to ionising radiations can occur.

  9. Developing the radiation protection safety culture in the UK

    International Nuclear Information System (INIS)

    Cole, P; Marsh, A; Hallard, R; Broughton, J; Coates, R; Croft, J; Davies, K; Devine, I; Lewis, C; Marsden, P; McGeary, R; Riley, P; Rogers, A; Rycraft, H; Shaw, A

    2014-01-01

    In the UK, as elsewhere, there is potential to improve how radiological challenges are addressed through improvement in, or development of, a strong radiation protection (RP) safety culture. In preliminary work in the UK, two areas have been identified as having a strong influence on UK society: the healthcare and nuclear industry sectors. Each has specific challenges, but with many overlapping common factors. Other sectors will benefit from further consideration. In order to make meaningful comparisons between these two principal sectors, this paper is primarily concerned with cultural aspects of RP in the working environment and occupational exposures rather than patient doses. The healthcare sector delivers a large collective dose to patients each year, particularly for diagnostic purposes, which continues to increase. Although patient dose is not the focus, it must be recognised that collective patient dose is inevitably linked to collective occupational exposure, especially in interventional procedures. The nuclear industry faces major challenges as work moves from operations to decommissioning on many sites. This involves restarting work in the plants responsible for the much higher radiation doses of the 1960/70s, but also performing tasks that are considerably more difficult and hazardous than those original performed in these plants. Factors which influence RP safety culture in the workplace are examined, and proposals are considered for a series of actions that may lead to an improvement in RP culture with an associated reduction in dose in many work areas. These actions include methods to improve knowledge and awareness of radiation safety, plus ways to influence management and colleagues in the workplace. The exchange of knowledge about safety culture between the nuclear industry and medical areas may act to develop RP culture in both sectors, and have a wider impact in other sectors where exposures to ionising radiations can occur. (memorandum)

  10. Development and application of isotopes and radiation technology in Indonesia

    Energy Technology Data Exchange (ETDEWEB)

    Djaloeis, A. [DDG, Batan, Jakarta (Indonesia)

    1997-10-01

    The National Atomic Energy Agency (BATAN) of the Republic of Indonesia is the highest agency in the country, charged amongst others with the development and application of Isotopes and Radiation Technology as a tool in the search for the optimal solution of various national development problems, such as those encountered in the fields of Agriculture, Livestock, health/medicine, Industry, Environment and Energy. The acquisition and development of the scientific and technical expertise, R and D facilities/instruments and infrastructure have been achieved primarily through bilateral and multilateral collaborative activities with domestic, foreign and international institutions. On the basis of the achieved R and D results, the acquired techniques have been progressively transferred to the end-users and applied in solving scientific-technical problems in the aforementioned fields. This paper gives a brief overview of the present status and future trend of activities in the development and applications of isotopes and radiation technology in Agriculture, Livestock and Industry in Indonesia. In the field of Agriculture the research activities are focussed on obtaining and disseminating new crop varieties with desired specific characteristics and on increasing soil fertilizer efficiency. These research results and those on livestock feed supplementation formula and disease prevention have been applied in helping farmers in various parts of Indonesia to increase their productivity. In industry, irradiation technology for food preservation and sterilization has been successfully transferred to the commercial companies. The same is also true for Non-Destructive Examination, Radioactive Tracer and Radiation Based Process Monitoring Techniques. Natural and radioactive isotopes have been widely used also in hydrology, sedimentology and geothermal studies. Highlights of the results are presented and discussed

  11. Development and application of isotopes and radiation technology in Indonesia

    International Nuclear Information System (INIS)

    Djaloeis, A.

    1997-01-01

    The National Atomic Energy Agency (BATAN) of the Republic of Indonesia is the highest agency in the country, charged amongst others with the development and application of Isotopes and Radiation Technology as a tool in the search for the optimal solution of various national development problems, such as those encountered in the fields of Agriculture, Livestock, health/medicine, Industry, Environment and Energy. The acquisition and development of the scientific and technical expertise, R and D facilities/instruments and infrastructure have been achieved primarily through bilateral and multilateral collaborative activities with domestic, foreign and international institutions. On the basis of the achieved R and D results, the acquired techniques have been progressively transferred to the end-users and applied in solving scientific-technical problems in the aforementioned fields. This paper gives a brief overview of the present status and future trend of activities in the development and applications of isotopes and radiation technology in Agriculture, Livestock and Industry in Indonesia. In the field of Agriculture the research activities are focussed on obtaining and disseminating new crop varieties with desired specific characteristics and on increasing soil fertilizer efficiency. These research results and those on livestock feed supplementation formula and disease prevention have been applied in helping farmers in various parts of Indonesia to increase their productivity. In industry, irradiation technology for food preservation and sterilization has been successfully transferred to the commercial companies. The same is also true for Non-Destructive Examination, Radioactive Tracer and Radiation Based Process Monitoring Techniques. Natural and radioactive isotopes have been widely used also in hydrology, sedimentology and geothermal studies. Highlights of the results are presented and discussed

  12. Radiation disinfestation: A viable technology for developing countries

    International Nuclear Information System (INIS)

    Loaharanu, P.

    1985-01-01

    Increasing food production in many countries is often offset by spoilage losses that occur at different stages after harvesting, slaughtering, or catching. The situation becomes critical in developing countries as more food is needed to feed the ever-increasing population. One of the major problems of losses of food and agricultural products during storage is insect infestation. This paper reviews some insect infestation problems of valuable crops in developing countries such as cereals, pulses, dried fish and meat, fresh and dried fruits, coffee and cocoa beans, spices, and cured tobacco leaves. Present practices of chemical fumigation to eliminate insect problems in these crops give rise to concern from the points of view of both public health and occupational safety. Irradiation technology has been shown to be as effective as other insect disinfestation methods and could provide a viable alternative for this purpose. Insects do not develop resistance to physical techniques such as heat or irradiation as they do to chemical treatments. Applications of radiation for disinfestation of food and agricultural products of importance to developing countries are discussed. The economics of radiation disinfestation of cereals and pulses, dried fish, and fresh fruits are also discussed

  13. Calculating the cost of research and Development in nuclear and radiation safety

    International Nuclear Information System (INIS)

    Matsulevich, N.Je.; Nosovs'ka, A.A.

    2010-01-01

    Methodological support assessing the cost of research and development in the area of nuclear and radiation safety regulation is considered. Basic methodological recommendations for determining labor expenditures for research and development in nuclear and radiation safety are provided.

  14. Development of an electronic radiation oncology patient information management system.

    Science.gov (United States)

    Mandal, Abhijit; Asthana, Anupam Kumar; Aggarwal, Lalit Mohan

    2008-01-01

    The quality of patient care is critically influenced by the availability of accurate information and its efficient management. Radiation oncology consists of many information components, for example there may be information related to the patient (e.g., profile, disease site, stage, etc.), to people (radiation oncologists, radiological physicists, technologists, etc.), and to equipment (diagnostic, planning, treatment, etc.). These different data must be integrated. A comprehensive information management system is essential for efficient storage and retrieval of the enormous amounts of information. A radiation therapy patient information system (RTPIS) has been developed using open source software. PHP and JAVA script was used as the programming languages, MySQL as the database, and HTML and CSF as the design tool. This system utilizes typical web browsing technology using a WAMP5 server. Any user having a unique user ID and password can access this RTPIS. The user ID and password is issued separately to each individual according to the person's job responsibilities and accountability, so that users will be able to only access data that is related to their job responsibilities. With this system authentic users will be able to use a simple web browsing procedure to gain instant access. All types of users in the radiation oncology department should find it user-friendly. The maintenance of the system will not require large human resources or space. The file storage and retrieval process would be be satisfactory, unique, uniform, and easily accessible with adequate data protection. There will be very little possibility of unauthorized handling with this system. There will also be minimal risk of loss or accidental destruction of information.

  15. Development of an electronic radiation oncology patient information management system

    Directory of Open Access Journals (Sweden)

    Mandal Abhijit

    2008-01-01

    Full Text Available The quality of patient care is critically influenced by the availability of accurate information and its efficient management. Radiation oncology consists of many information components, for example there may be information related to the patient (e.g., profile, disease site, stage, etc., to people (radiation oncologists, radiological physicists, technologists, etc., and to equipment (diagnostic, planning, treatment, etc.. These different data must be integrated. A comprehensive information management system is essential for efficient storage and retrieval of the enormous amounts of information. A radiation therapy patient information system (RTPIS has been developed using open source software. PHP and JAVA script was used as the programming languages, MySQL as the database, and HTML and CSF as the design tool. This system utilizes typical web browsing technology using a WAMP5 server. Any user having a unique user ID and password can access this RTPIS. The user ID and password is issued separately to each individual according to the person′s job responsibilities and accountability, so that users will be able to only access data that is related to their job responsibilities. With this system authentic users will be able to use a simple web browsing procedure to gain instant access. All types of users in the radiation oncology department should find it user-friendly. The maintenance of the system will not require large human resources or space. The file storage and retrieval process would be be satisfactory, unique, uniform, and easily accessible with adequate data protection. There will be very little possibility of unauthorized handling with this system. There will also be minimal risk of loss or accidental destruction of information.

  16. Main stages in the development of radiation immunology: from immunochemical analysis of injury to monitored radiotherapy

    International Nuclear Information System (INIS)

    Yarilin, A.A.; Kashkin, K.P.

    1982-01-01

    The results of research of the radiation action on immunity are presented. The results of immunochemical investigation of radiation tissue injuries are considered. Much attention is given to the problem of radiation injury and repair of the lymphoid system. It is shown that the next stage of development of radiation immunology is immunologic control of radiotherapy of oncologic patients

  17. Development of eco-friendly polymeric materials by radiation

    International Nuclear Information System (INIS)

    Choi, Jae-hak; Shim, Kihyung; Kim, Jaeyoung

    2012-12-01

    In this project, the core technologies such as fabrication of eco-friendly and high-performance bioplastics, anionic exchange membranes for the energy generation, and anisotropic conductive films (ACF) for the electronic devices were developed by using an eco-friendly and low-energy consumption radiation. In the 1 st project group, the fabrication technologies of biodegradable polymer-based blends, biocompoistes, and foam were developed using a radiation crosslinking technology, and the possibility of their commercialization was evaluated through the fabrication of prototype products (fruits packaging material and adhesive) in the practical production lines. In the 2 nd project group, the fabrication technology of the anion exchange membranes for alkaline fuel cell were prepared by utilizing the inherent property of radiation such as high ionizing energy and penetrating depth. The ion exchange capacity, ion conductivity, high ionizing energy and penetrating depth. The ion exchange capacity, ion conductivity, high ionizing energy and penetrating depth. The ion exchange capacity, ion conductivity, mechanical property, and chemical stability of the prepared membranes were measured. The results of the MEA performance test, the maximum power density of 115 mW and operation for 200 hours, indicates the possibility of the use of anion exchange membranes for alkaline fuel cell. In the 3rd project group, the electron beam-induced room temperature and fast curable epoxy was developed and the mechanism of electron beam-induced curing was investigated using various analytical methods. On the basis of the physical and electrical characterization, the prepared ACF exhibited lower resistance and higher tensile strength compared to that of the commercialized one

  18. Development of eco-friendly polymeric materials by radiation

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jae-hak; Shim, Kihyung; Kim, Jaeyoung; and others

    2012-12-15

    In this project, the core technologies such as fabrication of eco-friendly and high-performance bioplastics, anionic exchange membranes for the energy generation, and anisotropic conductive films (ACF) for the electronic devices were developed by using an eco-friendly and low-energy consumption radiation. In the 1{sup st} project group, the fabrication technologies of biodegradable polymer-based blends, biocompoistes, and foam were developed using a radiation crosslinking technology, and the possibility of their commercialization was evaluated through the fabrication of prototype products (fruits packaging material and adhesive) in the practical production lines. In the 2{sup nd} project group, the fabrication technology of the anion exchange membranes for alkaline fuel cell were prepared by utilizing the inherent property of radiation such as high ionizing energy and penetrating depth. The ion exchange capacity, ion conductivity, high ionizing energy and penetrating depth. The ion exchange capacity, ion conductivity, high ionizing energy and penetrating depth. The ion exchange capacity, ion conductivity, mechanical property, and chemical stability of the prepared membranes were measured. The results of the MEA performance test, the maximum power density of 115 mW and operation for 200 hours, indicates the possibility of the use of anion exchange membranes for alkaline fuel cell. In the 3rd project group, the electron beam-induced room temperature and fast curable epoxy was developed and the mechanism of electron beam-induced curing was investigated using various analytical methods. On the basis of the physical and electrical characterization, the prepared ACF exhibited lower resistance and higher tensile strength compared to that of the commercialized one.

  19. A case of acutely developed delayed radiation myelopathy

    International Nuclear Information System (INIS)

    Hayashi, Shintaro; Amari, Masakuni; Fukuda, Toshio; Okamoto, Koichi

    2002-01-01

    A 66-year-old man with a history of hypertension received radiation therapy on his neck at age 61 because of laryngeal cancer (T1bN0M0). Five years after the radiation, he acutely developed dysuria, tetraparesis and dissociated sensory disturbances below bilateral Th4 level. T2 weighted MRI showed a high signal lesion affecting the central area of the spinal cord extending from C1 to C7. On the second clinical day, he developed respiratory arrest and was ventilated. The cerebrospinal fluid contained 20/mm 3 (monocyte 15, neutorophil 5) white cells; protein was 52.5 mg/dl; IgG index 0.54; Q albumin was 9.6; tests for oligoclonal band and myelin basic protein were negative; a culture yielded no microorganism. He was treated with steroids and supportive measures without improvement, and died of a sudden cardiac arrest on the 8th clinical day. postmortem examination confirmed conspicuous focal spongy changes with many axonal swellings, especially in the posterior and lateral columns at cervical and Th1 levels. The pathological findings were considered to be compatible with those of delayed radiation myelopathy (DRM). In the anterior horn of the cervical cord there were lesions of diffuse racification and the proliferation of small vessels. There were no findings of hyaline vascular changes, infarction or metastasis of laryngeal cancer at the spinal cord. It is considered that hyperintensity of signals on T2-weighted may originate from racification and proliferation of small vessels in the gray matter, and these pathological changes would be intimately associated with the severe neurologic morbidity of this patient. Acute development of neurological findings and the pathological changes in the gray matter of the spinal cord are rare manifestations of DRM. (author)

  20. Delayed development of radiation sickness in animals following partial exposure

    International Nuclear Information System (INIS)

    Vershinina, S.F.; Markochev, A.V.

    1995-01-01

    Causes of reduction of the life span of animals after partial exposure of the head, thorax, and abdomen are analyzed. Pulmonosclerosis and cardiosclerosis were mainly responsible for animal death following partial radiation exposure of the thorax; these conditions appreciably shortened the life span of the animals. After exposure of the head deaths were due to pneumonias which negligibly reduced the duration of life. Exposure of the abdomen led to the development of diabetes mellitus which shortened the life span by half. 18 refs., 1 tab

  1. Developing of a New Atmospheric Ionizing Radiation (AIR) Model

    Science.gov (United States)

    Clem, John M.; deAngelis, Giovanni; Goldhagen, Paul; Wilson, John W.

    2003-01-01

    As a result of the research leading to the 1998 AIR workshop and the subsequent analysis, the neutron issues posed by Foelsche et al. and further analyzed by Hajnal have been adequately resolved. We are now engaged in developing a new atmospheric ionizing radiation (AIR) model for use in epidemiological studies and air transportation safety assessment. A team was formed to examine a promising code using the basic FLUKA software but with modifications to allow multiple charged ion breakup effects. A limited dataset of the ER-2 measurements and other cosmic ray data will be used to evaluate the use of this code.

  2. Recent developments in the Los Alamos radiation transport code system

    International Nuclear Information System (INIS)

    Forster, R.A.; Parsons, K.

    1997-01-01

    A brief progress report on updates to the Los Alamos Radiation Transport Code System (LARTCS) for solving criticality and fixed-source problems is provided. LARTCS integrates the Diffusion Accelerated Neutral Transport (DANT) discrete ordinates codes with the Monte Carlo N-Particle (MCNP) code. The LARCTS code is being developed with a graphical user interface for problem setup and analysis. Progress in the DANT system for criticality applications include a two-dimensional module which can be linked to a mesh-generation code and a faster iteration scheme. Updates to MCNP Version 4A allow statistical checks of calculated Monte Carlo results

  3. Knowledge Management in the Development and Use of Radiation Technologies

    International Nuclear Information System (INIS)

    Egorkin, A.V.; Kartashev, E.R.; Sumina, N.A.; Kheteev, M.V.

    2014-01-01

    Preservation and Transfer of Knowledge: Preservation of critical knowledge in institute takes place in three ways: - First, by digitization of scientific, technical, patent and design documentation. This work has already been done by more than 3,000 documents: technical reports, patents, articles and monographs of the Institute employees, periodic collections - works of the Institute ('''Radiation Technology'' and ''Problems of Atomic Science and Technology'', a series of ''Radiation Technology'' and ''Technical Physics and Automation''), scientific-technical and design documentation for virtually the entire period of the Institute activity. - Secondly, the knowledge and experience of individual specialists transferred to successors (in addition to the reports and publications in scientific and technical literature ), the most effectively – through working together on themes on research and development of methods and technical devices, by preparation of theses and dissertations. In such a way, Knowledge is transferred, for example, in the development in the Institute of gamma-therapeutic complex. - Third, one of the modern methods of preserving knowledge is to create a multimedia product, when expert, the carrier of knowledge, records the information on progress, successes and challenges in the work, methods of its overcoming, information on scientific and methodological and technical achievements throughout his creative life, the necessary data on scientific and technical reference books, which can later help followers to create new methods and devices. Such multimedia product was prepared in the institute on the base of the experience of the development of gamma irradiation installations, in particular for sterilization of medical products

  4. Development of high temperature, radiation hard detectors based on diamond

    Energy Technology Data Exchange (ETDEWEB)

    Metcalfe, Alex, E-mail: Alex.Metcalfe@brunel.ac.uk [Wolfson Centre for Materials Processing, Brunel University London, Uxbridge UB8 3PH (United Kingdom); Fern, George R. [Wolfson Centre for Materials Processing, Brunel University London, Uxbridge UB8 3PH (United Kingdom); Hobson, Peter R. [Centre for Sensors & Instrumentation, College of Engineering, Design and Physical Sciences, Brunel University London, Uxbridge UB8 3PH (United Kingdom); Ireland, Terry; Salimian, Ali; Silver, Jack [Wolfson Centre for Materials Processing, Brunel University London, Uxbridge UB8 3PH (United Kingdom); Smith, David R. [Centre for Sensors & Instrumentation, College of Engineering, Design and Physical Sciences, Brunel University London, Uxbridge UB8 3PH (United Kingdom); Lefeuvre, Gwenaelle [Micron Semiconductor Ltd., Lancing BN15 8 SJ (United Kingdom); Saenger, Richard [Schlumberger Limited, 91240 Clamart (France)

    2017-02-11

    Single crystal CVD diamond has many desirable properties compared to current, well developed, detector materials; exceptional radiation, chemical and physical hardness, chemical inertness, low Z (close to human tissue, good for dosimetry), wide bandgap and an intrinsic pathway to fast neutron detection through the {sup 12}C(n,α){sup 9}Be reaction. However effective exploitation of these properties requires development of a suitable metallisation scheme to give stable contacts for high temperature applications. To best utilise available processing techniques to optimise sensor response through geometry and conversion media configurations, a reliable model is required. This must assess the performance in terms of spectral response and overall efficiency as a function of detector and converter geometry. The same is also required for proper interpretation of experimental data. Sensors have been fabricated with varying metallisation schemes indented to permit high temperature operation; Present test results indicate that viable fabrication schemes for high temperature contacts have been developed and present modelling results, supported by preliminary data from partners indicate simulations provide a useful representation of response. - Highlights: • Radiation sensors using diamond as the sensitive volume have been constructed. • Functionality of these sensors with minimal degradation has been confirmed at 100 °C. • Sensitisation to thermal neutrons by addition of conversion layers has been modelled. • Modelling suggests 4× efficiency improvements from 3d converter-substrate interfaces.

  5. Prenatal exposure to ionizing radiation and subsequent development of seizures

    International Nuclear Information System (INIS)

    Dunn, K.; Yoshimaru, H.; Otake, M.; Annegers, J.F.; Schull, W.J.

    1990-01-01

    Seizures are a frequent sequela of impaired brain development and can be expected to affect more children with radiation-related brain damage than children without such damage. This report deals with the incidence and type of seizures among survivors prenatally exposed to the atomic bombing of Hiroshima and Nagasaki, and their association with specific stages of prenatal development at the time of irradiation. Fetal radiation dose was assumed to be equal to the dose to the maternal uterus. Seizures here include all references in the clinical record to seizure, epilepsy, or convulsion. Histories of seizures were obtained at biennial routine clinical examinations starting at about the age of 2 years. These clinical records were used to classify seizures as febrile or unprovoked (without precipitating cause). No seizures were ascertained among subjects exposed 0-7 weeks after fertilization at doses higher than 0.10 Gy. The incidence of seizures was highest with irradiation at the eighth through the 15th week after fertilization among subjects with doses exceeding 0.10 Gy and was linearly related to the level of fetal exposure. This obtains for all seizures without regard to the presence of fever or precipitating causes, and for unprovoked seizures. When the 22 cases of severe mental retardation were excluded, the increase in seizures was only suggestively significant and only for unprovoked seizures. After exposure at later stages of development, there was no increase in recorded seizures

  6. Chalcogenide Glass Radiation Sensor; Materials Development, Design and Device Testing

    Energy Technology Data Exchange (ETDEWEB)

    Mitkova, Maria; Butt, Darryl; Kozicki, Michael; Barnaby, Hugo

    2013-04-30

    studied the effect of x-rays and γ-rays, on thin film chalcogenide glasses and applied them in conjunction with film incorporating a silver source in a new type of radiation sensor for which we have an US patent application [3]. In this report, we give data about our studies regarding our designed radiation sensor along with the testing and performance at various radiation doses. These studies have been preceded by materials characterization research related to the compositional and structural characteristics of the active materials used in the radiation sensor design. During the work on the project, we collected a large volume of material since every experiment was repeated many times to verify the results. We conducted a comprehensive material research, analysis and discussion with the aim to understand the nature of the occurring effects, design different structures to harness these effects, generated models to aid in the understanding the effects, built different device structures and collected data to quantify device performance. These various aspects of our investigation have been detailed in previous quarterly reports. In this report, we present our main results and emphasize on the results pertaining to the core project goals materials development, sensor design and testing and with an emphasis on classifying the appropriate material and design for the optimal application. The report has three main parts: (i) Presentation of the main data; (ii) Bulleted summary of the most important results; (iii) List of the patent, journal publications, conference proceedings and conferences participation, occurring as a result of working on the project.

  7. Plant breeding by using radiation mutation - Development of radiation indicator plants by molecular breeding

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Jang Ryol; Kwak, Sang Soo; Kwon, Seok Yoon [Korea Research Institute of Bioscience and Biotechnology, Taejon (Korea)

    2000-04-01

    - tSOD1, cytosolic CuZnSOD cDNA was cloned from tobacco cDNA library by PCR. To develop the under-producing the transgenic plants, the vectors were constructed using by antisense and co-supressing technology. The transgenic tobacco plants were confirmed that over 60% of kanamycin-resistant plants were introduced the foreign gene by PCR and transformed one copy through Southern blot analysis. - In an attempt to identify marker genes for gamma irradiation of plants, expression patterns of diverse genes upon gamma irradiation of young tobacco plants were investigated. With the knowledge of distinctive expression patterns of diverse genes, irradiation-indicating marker plants could be developed by engineering and monitoring multiple radiation-responsive genes. Additionally, a gamma irradiation-responsive NtTMK1 receptor-like kinase gene was molecular biologically characterized. -Uranium reductase gene (Cytochrome C3) and radiation resistance gene (recA) have been cloned from Desulfovibrio and Deinococcus radiodurans. -Two plant transformation vectors (pCYC3 and pDrecA) have been constructed. - Tobacco transgenic plants of have been obtained. 52 refs., 5 figs. (Author)

  8. Development of aerial gamma radiation survey system, 4

    International Nuclear Information System (INIS)

    Saito, Kimiaki; Nagaoka, Toshi; Sakamoto, Ryuichi; Tsutsumi, Masahiro; Moriuchi, Shigeru

    1985-02-01

    Field experiments have been performed by JAERI since 1982 to obtain fundamental data required for development of aerial radiation survey system. In order to supplement the fundamental radiation data, theoretical calculations have been carried out. The utilized Monte Carlo transport program was verified by simulative calculations of the field experiments, and characteristics data on environmental gamma rays have been accumulated. In this report, the field experiments in 1981 and 1982 were simulated making use of the Monte Carlo transport calculation code YURI developed in JAERI. Comparisons were made between experimental and calculated results for exposure rate and flux density originated from terrestrial sources, and from a point source at height of 2.5 m above the ground. Good agreements between the data verified the transport program. As fundamental characteristics data on environmental gamma rays, spatial distributions of exposure, fluence, energy spectra, angular spectra and average energy were reported and discussed, for terrestrial sources of 40 K, 232 Th-series and 238 U-series, for a plane source on the ground and for a point source at 2.5 m above the ground. (author)

  9. Development of deodorizing materials by radiation graft polymerization

    International Nuclear Information System (INIS)

    Sugo, Takanobu; Okamoto, Jiro; Fujiwara, Kunio; Sekiguchi, Hideo.

    1989-01-01

    With the development of society, the countermeasures for service water and sewerage in large cities and the environment preservation in industrial districts become difficult as their scale becomes larger. There are many unsolved problems, for example photochemical smog due to harmful gases, exhaust gas from automobiles, and smell of toilets and home waste water. The deodorizing materials used so far are mainly inorganic substances, and their ability of adsorbing harmful gases is very low. Besides, those are mostly granular, and limited in the formability. Therefore, it is expected to develop the fibrous adsorbent which has large adsorbing surface area and is easy to make filters. The chemical structures of the compounds having smell are shown. Eight legal bad smell substances which exert large influence to environment even in very small amount are designated. In this paper, the method of introducing functional radicals into existing fiber materials by the application of radiation graft polymerization process and the test of removing smelling compositions by using the obtained resin are reported. The experimental method, and the results of radiation graft polymerization, the adsorption of basic gases and acid gases, and gas flow test are described. (K.I.)

  10. Progress in the development of a tracking transition radiation detector

    International Nuclear Information System (INIS)

    Whitaker, J.S.; Beatty, J.; Shank, J.T.; Wilson, R.J.; Polychronakos, V.A.; Radeka, V.; Stephani, D.; Beker, H.; Bock, R.K.; Botlo, M.; Fabjan, C.W.; Pfennig, J.; Price, M.J.; Willis, W.J.; Akesson, T.; Chernyatin, V.; Dolgoshein, B.; Nevsky, P.; Potekhin, M.; Romanjuk, A.; Sosnovtsev, V.; Gavrilenko, I.; Maiburov, S.; Muravjev, S.; Shmeleva, A.

    1990-01-01

    The purpose of the TRD/Tracker is to provide charged particle tracking in the r-z plane and to provide particle identification capabilities that are independent of and complementary to calorimetric methods. The tracking goals include observation of the charged particle multiplicity and topology, reconstruction of the primary vertex or vertices, and assignment of charged particles to the correct vertex. Particle identification goals include the independent validation of electron candidates selected by calorimetric signatures, the rejection of false electron candidates that rise from accidental overlaps of low momentum charged particles with photon-induced electromagnetic showers in the calorimeter, and the identification of electrons arising from Dalitz decays or from photon conversions. The authors report on progress towards the development of an integrated transition radiation detector and charged particle tracker. Mechanical design and simulation of a detector has been pursued; a prototype device with 240 channels has been constructed and tested. Innovative construction techniques have been developed

  11. Development of Spectrometer Software for Electromagnetic Radiation Measurement and Analysis

    International Nuclear Information System (INIS)

    Mohd Idris Taib; Noor Ezati Shuib; Wan Saffiey Wan Abdullah

    2013-01-01

    This software was under development using LabVIEW to be using with StellarNet Spectrometer system. StellarNet Spectrometer was supplied with SpectraWiz operating software that can measure spectral data for real-time spectroscopy. This LabVIEW software was used to access real-time data from SpectraWiz dynamic link library as hardware interfacing. This software will acquire amplitude of every electromagnetic wavelength at periodic time. In addition to hardware interfacing, the user interface capabilities of software include plotting of spectral data in various mode including scope, absorbance, transmission and irradiance mode. This software surely can be used for research and development in application, utilization and safety of electromagnetic radiation, especially solar, laser and ultra violet. Of-line capabilities of this software are almost unlimited due to availability of mathematical and signal processing function in the LabVIEW add on library. (author)

  12. Earth cloud, aerosol, and radiation explorer optical payload development status

    Science.gov (United States)

    Hélière, A.; Wallace, K.; Pereira do Carmo, J.; Lefebvre, A.

    2017-09-01

    The European Space Agency (ESA) and the Japan Aerospace Exploration Agency (JAXA) are co-operating to develop as part of ESA's Living Planet Programme, the third Earth Explorer Core Mission, EarthCARE, with the ojective of improving the understanding of the processes involving clouds, aerosols and radiation in the Earth's atmosphere. EarthCARE payload consists of two active and two passive instruments: an ATmospheric LIDar (ATLID), a Cloud Profiling Radar (CPR), a Multi-Spectral Imager (MSI) and a Broad-Band Radiometer (BBR). The four instruments data are processed individually and in a synergetic manner to produce a large range of products, which include vertical profiles of aerosols, liquid water and ice, observations of cloud distribution and vertical motion within clouds, and will allow the retrieval of profiles of atmospheric radiative heating and cooling. MSI is a compact instrument with a 150 km swath providing 500 m pixel data in seven channels, whose retrieved data will give context to the active instrument measurements, as well as providing cloud and aerosol information. BBR measures reflected solar and emitted thermal radiation from the scene. Operating in the UV range at 355 nm, ATLID provides atmospheric echoes from ground to an altitude of 40 km. Thanks to a high spectral resolution filtering, the lidar is able to separate the relative contribution of aerosol and molecular scattering, which gives access to aerosol optical depth. Co-polarised and cross-polarised components of the Mie scattering contribution are measured on dedicated channels. This paper will provide a description of the optical payload implementation, the design and characterisation of the instruments.

  13. Development of radiation countermeasure using novel radioresistant bacteria

    International Nuclear Information System (INIS)

    Kumar, Raj; Singh, Shravan K.; Malhotra, Poonam; Gupta, Ashutosh K.; Singh, Praveen K.; Chhachhia, Neha

    2014-01-01

    Radioresistant bacteria sustain their lives in extreme radiation environment and have capabilities to combat radiation induced oxidative stress. Therefore, factors associated with radioresistancy in bacteria may also provide trans-species radioprotection. To test this hypothesis, present work was initiated at INMAS long back. With this background a novel radioresistant bacterium Bacillus sp. INM-1 isolated and its novel secondary metabolite i.e. Semiquinone Glucoside Derivative (SQGD) carrying radioprotective capabilities was purified. SQGD was evaluated for its free radical scavenging, protein, enzymes, plasmid and biological membranes radioprotection capabilities in vitro. SQGD was also tested for its whole body radioprotective efficacy using oral route of administration. Systemic radioprotection offered by SQGD to gastrointestinal, haematopoietic and male reproductive system was studied. Modulation in endogenous antioxidant enzymes and cytoprotective cytokines expression upon irradiation and SQGD pretreatment was determined. A laboratory process for chemical synthesis of bacterial radioprotective molecule has also been developed (Patent filed No. 2075/DEL/2014). Results of the study demonstrated that SQGD efficiently scavenge free radicals in vitro. SQGD provides excellent protection to structural and functional proteins, plasmid DNA and biomembranes against radiation induced oxidative damage. SQGD was observed to offer ∼ 83% whole body survival to lethally irradiated mice when administered 2h before irradiation by oral route. SQGD was found to ensure significant radioprotection to gastro-intestinal, hematopoietic and male reproductive system of irradiated mice. Protein expression studies revealed that SQGD pretreatment to the irradiated mice significantly increased expression of G-CSF, GM-CSF, MCSF; NFkB, IL-2, IL-12, IL-23, IL-6, PCNA and PARP. In conclusion, present study decisively justified the radioprotective potential of bacterial metabolite SQGD

  14. Development of Modulators Against Degenerative Aging Using Radiation Fusion Technology

    Energy Technology Data Exchange (ETDEWEB)

    Jo, Sung Kee; Jung, U.; Park, H. R.

    2010-04-15

    In this study, we selected final 20 biomarkers for the degenerative aging to develop radiation aging modeling, and validated a few of selected markers to utilize them in the screening of aging modulators. To select the biomarkers of the degenerative aging, 4 categories of aging-related markers (immune/hematopoiesis, oxidative damage, signaling molecule, lipid metabolism) were comparatively analyzed in irradiated and normally aged biosystems (cell lines or mice). In result, most of the biomarkers showed similar changes by irradiation and normal aging. Regarding the immune/hematopoiesis, the decline of immune cell functions (lymphocyte, NK cell) and Th1/Th2 imbalance, and decreased antigen-presenting of dendritic cells were observed and 10 biomarkers were selected in this category. mtDNA deletion was selected for the oxidative damage marker, 6 biomarkers including p21 and p-FOXO3a for signaling molecule biomarkers, and 3 biomarkers including the adipose tissue weight were selected for lipid metabolism. In addition, the various radiation application conditions by single/factionated irradiation and the periods after the irradiation were investigated for the optimal induction of changes of biomarker, which revealed that total 5Gy of 10 or more fractionated irradiations and 4 months or greather period were observed to be optimal. To found the basis for the screening of natural aging modulators, some selected aging biomarkers were validated by their inhibition by well-known natural agents (EGCG, HemoHIM, etc) in aged cell or mouse model. Additionally, by evaluating the reductive efficacy of 5 natural agents on the degeneration of skin and reproductive organs induced by radiation and chemicals (cyclophosphamide, etc), we established the base for the screening of degenerative diseases by various factors

  15. Development of Modulators Against Degenerative Aging Using Radiation Fusion Technology

    International Nuclear Information System (INIS)

    Jo, Sung Kee; Jung, U.; Park, H. R.

    2010-04-01

    In this study, we selected final 20 biomarkers for the degenerative aging to develop radiation aging modeling, and validated a few of selected markers to utilize them in the screening of aging modulators. To select the biomarkers of the degenerative aging, 4 categories of aging-related markers (immune/hematopoiesis, oxidative damage, signaling molecule, lipid metabolism) were comparatively analyzed in irradiated and normally aged biosystems (cell lines or mice). In result, most of the biomarkers showed similar changes by irradiation and normal aging. Regarding the immune/hematopoiesis, the decline of immune cell functions (lymphocyte, NK cell) and Th1/Th2 imbalance, and decreased antigen-presenting of dendritic cells were observed and 10 biomarkers were selected in this category. mtDNA deletion was selected for the oxidative damage marker, 6 biomarkers including p21 and p-FOXO3a for signaling molecule biomarkers, and 3 biomarkers including the adipose tissue weight were selected for lipid metabolism. In addition, the various radiation application conditions by single/factionated irradiation and the periods after the irradiation were investigated for the optimal induction of changes of biomarker, which revealed that total 5Gy of 10 or more fractionated irradiations and 4 months or greather period were observed to be optimal. To found the basis for the screening of natural aging modulators, some selected aging biomarkers were validated by their inhibition by well-known natural agents (EGCG, HemoHIM, etc) in aged cell or mouse model. Additionally, by evaluating the reductive efficacy of 5 natural agents on the degeneration of skin and reproductive organs induced by radiation and chemicals (cyclophosphamide, etc), we established the base for the screening of degenerative diseases by various factors

  16. Genomics in development of radiation countermeasure from Hippophae rhamnoides

    International Nuclear Information System (INIS)

    Madhu Bala

    2013-01-01

    Development of an effective and non-toxic radiation countermeasure has been a global challenge, till date. On one hand single molecules have failed due to unacceptable toxicity and on the other hand herbal drugs, though non-toxic, are generally neglected because of issues such as incomplete understanding on mechanisms of actions, efficacy and quality control. In the conventional drug discovery process, a single active constituent is isolated, purified, and standardized, but herbal drugs have complex composition and multiple targeted actions. The assessment of efficacy and toxicity of herbal drugs is, therefore, not as straight forward as in case of single active compound. The completion of genome projects of human, mouse and many other simpler experimental models has opened multiple newer avenues for evaluating the metabolism, safety and efficacy of herbal drugs. The radioprotective properties of leaves of Hippophae rhamnoides L. (common name Seabuckthorn, family Eleagnaceae) were reported (Bala et al., 2009, J Herbs and Med Plants). Administration of SBL-1 (a coded herbal preparation from Seabuckthorn leaves), before whole body exposure to lethal dose of 60 Co-gamma-rays (10 Gy), rendered >90% survivors in mice population, while 100% mortality was observed in non-SBL-1 treated, 60 Co-gamma- irradiated (10 Gy) controls. Though, plant H. rhamnoides is popular for its medicinal and neutraceutical values and finds place is in many traditional medicinal systems world over, its prophylactic use as a radiation countermeasure is novel and needed thorough evaluation. To gain in depth understanding on metabolism and safety of SBL-1, the experimental animals were treated with radioprotective concentration of SBL-1. The genome evaluation was performed at different time intervals after the treatment. This talk highlights some of the prominent molecular pathways and genes affected by SBL-1 treatment in experimental animals. Our study suggested that application of genomics

  17. New developments in the treatment of the acute radiation syndrome

    International Nuclear Information System (INIS)

    Wagemaker, G.

    1996-01-01

    Radiation accidents associated with the use of nuclear power, radiation devices and industrial applications have resulted in a number of individuals with significant partial or total body exposures, in a limited number with lethal outcome. Such exposures generally result in life-threatening suppression of bone marrow and immune functions and may be accompanied by high doses to the skin and underlying tissues. In recent years, new methods of diagnosis and treatment of such patients have entered development, while experience with relatively large-scale accidents, such as the Chernobyl cases, have clearly demonstrated the limitations of previous approaches. In particular bone marrow transplantation has met with limited success, mostly due to the inhomogeneous nature of accidental exposures as well as the frequent occurrence of other injuries other man bone marrow damage. Present day technology allows for direct estimates of the number of residual bone marrow stem cells to enable a rapid decision on the type of treatment indicated, while some twenty-five recombinant hemopoietic growth factors are under investigation to accelerate the recovery of white blood cells and platelets, as well as immune functions. If applied appropriately, such growth factor treatment will successfully replace bone marrow transplantation in the majority of accident cases. Advances in hemopoietic stem cell biology, both in terms of source of stem cells as well as their isolation, will on the other hand make stem cell infusion a much less risky operation than bone marrow transplantation has been in the past

  18. Development of a radiative divertor for DIII-D

    Energy Technology Data Exchange (ETDEWEB)

    Allen, S.L. [Lawrence Livermore National Lab., CA (United States); Brooks, N.H. [General Atomics, San Diego, CA (United States); Campbell, R.B. [Sandia National Labs., Albuquerque, NM (United States); Fenstermacher, M.E. [Lawrence Livermore National Lab., CA (United States); Hill, D.N. [Lawrence Livermore National Lab., CA (United States); Hyatt, A.W. [General Atomics, San Diego, CA (United States); Knoll, D.; Lasnier, C.J. [Lawrence Livermore National Lab., CA (United States); Lazarus, E.A. [Oak Ridge National Lab., TN (United States); Leonard, A.W. [General Atomics, San Diego, CA (United States); Lippmann, S.I. [General Atomics, San Diego, CA (United States); Mahdavi, M.A. [General Atomics, San Diego, CA (United States); Maingi, R. [Oak Ridge National Lab., TN (United States); Meyer, W. [Lawrence Livermore National Lab., CA (United States); Moyer, R.A. [California Univ., Los Angeles, CA (United States); Petrie, T.W. [General Atomics, San Diego, CA (United States); Porter, G.D. [Lawrence Livermore National Lab., CA (United States); Rensink, M.E. [Lawrence Livermore National Lab., CA (United States); Rognlien, T.D. [Lawrence Livermore National Lab., CA (United States); Schaffer, M.J. [General Atomics, San Diego, CA (United States); Smith, J.P. [General Atomics, San Diego, CA (United States); Staebler, G.M. [General Atomics, San Diego, CA (United States); Stambaugh, R.D. [General Atomics, San Diego, CA (United States); West, W.P. [General Atomics, San Diego, CA (United States); Wood, R.D. [Lawrence Livermore National Lab., CA (United States)

    1995-04-01

    We have used experiments and modeling to develop a new radiative divertor configuration for DIII-D. Gas puffing experiments with the existing open divertor have shown the creation of a localized ( similar 10 cm diameter) radiation zone which results in substantial reduction (3-10) in the divertor heat flux while {tau}{sub E} remains similar 2 times ITER-89P scaling. However, n{sub e} increases with D{sub 2} puffing, and Z{sub eff} increases with neon puffing. Divertor structures are required to minimize the effects on the core plasma. The UEDGE fluid code, benchmarked with DIII-D data, and the DEGAS neutrals transport code are used to estimate the effectiveness of divertor configurations; slots reduce the core ionization more than baffles. The overall divertor shape is set by confinement studies which indicate that high triangularity ({delta}{approx}0.8) is important for high {tau}{sub E} VH-modes. Results from engineering feasibility studies, including diagnostic access, will be presented. ((orig.)).

  19. Development of a self-maintenance radiation-tolerant robot

    International Nuclear Information System (INIS)

    Shimomura, Y.; Takahashi, H.; Tsuboi, Y.; Komatsu, K.

    2004-01-01

    The purpose of this research is to develop robot which dose not lose the function in radiation fields, and is able to get self-diagnosis and self-repair in the case of failure. The fundamental operation element and operational process algorithm are discussed. Utilizations of gas-micro electronics, which is easy to handle in comparison with vacuum field and to amplify with high speed by use of electron avalanche, are planed. The fundamental researches on radiation-tolerant robot which is not destructed by cosmic ray fields are carried out. The action of basic logic elements is ascertained. Self-repair type logic operations are considered. The self-repair type logic needs for to diagnosis abnormality of elements intellectually and repair by itself. Module failure diagnosis and repair plan technique based on qualitative inference are placed on the center of self-repair type logic. Self-maintenance robot can be actualized by modularization and divergence processing of diagnosis. (M. Suetake)

  20. Development of a murine model of acute radiation encephalopathy

    International Nuclear Information System (INIS)

    Xing Yigang; Tang Yamei; Liu Jun; Sun Ying

    2003-01-01

    Objective: To develop a murine model of acute radiation encephalopathy. Methods: A total of 40 rats were subjected to local γ-irradiation to the brain with the dosage of 7 Gy/d for 6 consecutive days. The amount of food intake, hairs and skin of irradiated field, body weight, general activities, CNS symptoms and signs were examined and recorded after irradiation. On day 3, 7, 14 and 30, the brain tissue was removed to observe histopathologic changes. Results: During the first two days after irradiation, the irradiated rats were agitated, and the amount of food intake decreased from day 2 onwards. No serious skin reaction to irradiation was observed. Survived rats had normal activities without any abnormal nervous signs. Histopathologic changes showed slight neuronal degeneration, smaller cell body, red-colored cytoplasm, disappearance of Nissl body, vacuolation, typical cell shrinkage, chromatin condensation and nuclear divergence. On the 14th and 30th days, hypochromatism, loose and reticular necrotic foci were found in some samples. Conclusion: The murine model of acute radiation encephalopathy is useful and practical in radiobiological studies

  1. Radiation processes for the development, production and examination of materials

    International Nuclear Information System (INIS)

    Wiesner, L.

    1984-01-01

    The process of doping semi-conductors by irradiating them with beams of ions, called ion implantation, has long been part of the industrial mass production of electronic solid components as the basis of the micro-electronics revolution. The use of electron and X-ray beams has made the manufacture of small silicon chips possible, so as to increase the memory and microprocessor capacity of a wafer. Using electron and γ rays, many compound materials based on polymers, have been manufactured, where only a small part of the nearly infinite number of combinations has been touched so far. The applications of radiation hardening extend from the treatment of coatings and paints for surface protection to glues and printed colours. The multiplicity of nuclear examination processes for solids and their surfaces has produced knowledge on the structure of materials, which accelerates the purposeful development of improved and new materials and makes it easier, sometimes even making it possible. Radiation methods are an important aid for quality control and assurance for material production. (orig./HP) [de

  2. Radiation protection perspectives in developing new medical technologies with ionizing radiations

    International Nuclear Information System (INIS)

    Arranz, L.

    1993-01-01

    The medical technical development with ionizing radiation is and will be followed by an effort to control and reduce their inherent risks and make it a safe tool that offers more exact diagnoses and more effective treatments. However, it is not foreseeable to achieve a decrease on the annual effective dose equivalent per capita due to medical irradiation (1.06 mSv in OECD countries), since the general population will go on increasing, and the same will happen to the elder population (with greater morbidity). The turn of the century will bring a time of major cost savings, but also a higher demand on the quality of life. The high cost technologies help the diagnostic and therapeutic procedures and therefore their use and spread are absolutely justified, according to health policy objectives. However, their diffusion should be spread out under efficiency and equity criteria. (author). 32 refs

  3. On the role of natural radiation background in the initial development of plants

    International Nuclear Information System (INIS)

    Kuzin, A.M.; Vagabova, M.Eh.; Primak-Mirolyubov, V.N.

    1977-01-01

    To obtain data on plant development under strictly controlled decreased natural radiation conditions, the experiment with radish seeds was conducted in a special chamber having a decreased natural radiation background. It has been shown that the development of seedlings in the course of the first 4-5 days in significantly delayed, and it normalizes when radiation sources, imitating the natural radiation background, are placed inside the chamber

  4. Development of evaluation and performance verification technology for radiotherapy radiation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, J. Y.; Jang, S. Y.; Kim, B. H. and others

    2005-02-15

    No matter how much the importance is emphasized, the exact assessment of the absorbed doses administered to the patients to treat the various diseases such as lately soaring malignant tumors with the radiotherapy practices is the most important factor. In reality, several over-exposed patients from the radiotherapy practice become very serious social issues. Especially, the development of a technology to exactly assess the high doses and high energies (In general, dose administered to the patients with the radiotherapy practices are very huge doses, and they are about three times higher than the lethal doses) generated by the radiation generators and irradiation equipment is a competing issue to be promptly conducted. Over fifty medical centers in Korea operate the radiation generators and irradiation equipment for the radiotherapy practices. However, neither the legal and regulatory systems to implement a quality assurance program are sufficiently stipulated nor qualified personnel who could run a program to maintain the quality assurance and control of those generators and equipment for the radiotherapy practices in the medical facilities are sufficiently employed. To overcome the above deficiencies, a quality assurance program such as those developed in the technically advanced countries should be developed to exactly assess the doses administered to patients with the radiotherapy practices and develop the necessary procedures to maintain the continuing performance of the machine or equipment for the radiotherapy. The QA program and procedures should induce the fluent calibration of the machine or equipment with quality, and definitely establish the safety of patients in the radiotherapy practices. In this study, a methodology for the verification and evaluation of the radiotherapy doses is developed, and several accurate measurements, evaluations of the doses delivered to patients and verification of the performance of the therapy machine and equipment are

  5. Development of Acne therapeutic hydrogel patches by radiation technology

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Younmook; Nho, Youngchang; Gwon, Huijeong; Park, Jongseok; Kim, Jinkyu; Kim, Yongsoo

    2012-04-15

    In this project, hydrogel patches containing herbal extracts mixture were developed by radiation technology for acne treatment. Propionibacterium acnes (P. acnes), one of the anaerobic bacterium, is the cause of inflammatory acne. To find novel mediation for inflammation of P. acnes, we confirmed the anti-bacterial and anti-inflammatory activities of several herbal extracts against P. acnes. The water extracts from five dried herbs, Phellodendron amurense Rupr., Paeonia lactiflora Pallas., Houttuynia cordata Thumb., Agrimonia pilosa Ledeb. and Glycyrrhiza uralensis Fisch., were mixed into biocompatible polymers and irradiated by using gamma-ray to prepare hydrogels. The hydrogels containing herbal extracts mixture initiated to decrease the growth of P. acnes and reduced the production of pro-inflammatory cytokines, TNF-{alpha}, IL-8, IL-1{beta} and IL-6, in experiment with human monocytic THP-1 cells treated with heat-killed P. acnes at 1 mg/ml of mixture concentration.

  6. Studies on the radiation application for development genetic resources

    International Nuclear Information System (INIS)

    Lee, Young Il; Song, Hi Sup; Kim, Jae Sung; Shin, In Chul; Lee, Sang Jae; Lee, Ki Woon; Lim, Young Tack; Lee, In Suk; Kang, Kwan Kyu.

    1997-07-01

    For the development of nuclear application technique on the induction and selection of radiation mutation in in vitro and in vivo mutagenesis, several crops plants such as rice, soybean, perilla potato and sweet potato were irradiated with gamma rays of various dose to the seeds. Variants of sweet potato plantlets were obtained from embryogenic callus irradiated with gamma rays and variants were analyzed by using DNA, RNA and protein band patterns. Various mutants were selected from rice, soybean and perilla for short plant, earliness, high yield, large seed size and disease resistance in the advanced mutant generations. Several promising mutants of rice, soybean and perilla will be released to farmers. (author). 198 refs., 26 tabs.,15 figs

  7. Development of Acne therapeutic hydrogel patches by radiation technology

    International Nuclear Information System (INIS)

    Lim, Younmook; Nho, Youngchang; Gwon, Huijeong; Park, Jongseok; Kim, Jinkyu; Kim, Yongsoo

    2012-04-01

    In this project, hydrogel patches containing herbal extracts mixture were developed by radiation technology for acne treatment. Propionibacterium acnes (P. acnes), one of the anaerobic bacterium, is the cause of inflammatory acne. To find novel mediation for inflammation of P. acnes, we confirmed the anti-bacterial and anti-inflammatory activities of several herbal extracts against P. acnes. The water extracts from five dried herbs, Phellodendron amurense Rupr., Paeonia lactiflora Pallas., Houttuynia cordata Thumb., Agrimonia pilosa Ledeb. and Glycyrrhiza uralensis Fisch., were mixed into biocompatible polymers and irradiated by using gamma-ray to prepare hydrogels. The hydrogels containing herbal extracts mixture initiated to decrease the growth of P. acnes and reduced the production of pro-inflammatory cytokines, TNF-α, IL-8, IL-1β and IL-6, in experiment with human monocytic THP-1 cells treated with heat-killed P. acnes at 1 mg/ml of mixture concentration

  8. Development of Remote Control Laboratory for Radiation Detection via Internet

    International Nuclear Information System (INIS)

    Park, Sang Tae; Lee, Hee Bok; Yuk, Keun Chul

    2002-01-01

    The role of experiments in science education is essential for understanding the natural phenomena and principle related to a subject. Therefore, the remote control experiment via Internet is one of key solution for distance learners in science education. The remote experiments are also necessary for the time-consuming experiment which takes several days, collaborative experiment between distance learners, expensive laboratory equipment which is not usually available to students, experimental procedure which is dangerous, etc. In this study, we have developed a general method for a remote control laboratory system using internet and interface techniques. It is possible for students to learn the nuclear physics to control the real instruments and conduct physics experimentation with internet techniques. We proposed the remote control radiation measurement system as a sample application. This system could be useful for the monitoring near a nuclear power plants in order to improve the environment data credibility to the public

  9. Studies on the radiation application for development genetic resources

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Young Il; Song, Hi Sup; Kim, Jae Sung; Shin, In Chul; Lee, Sang Jae; Lee, Ki Woon; Lim, Young Tack; Lee, In Suk; Kang, Kwan Kyu

    1997-07-01

    For the development of nuclear application technique on the induction and selection of radiation mutation in in vitro and in vivo mutagenesis, several crops plants such as rice, soybean, perilla potato and sweet potato were irradiated with gamma rays of various dose to the seeds. Variants of sweet potato plantlets were obtained from embryogenic callus irradiated with gamma rays and variants were analyzed by using DNA, RNA and protein band patterns. Various mutants were selected from rice, soybean and perilla for short plant, earliness, high yield, large seed size and disease resistance in the advanced mutant generations. Several promising mutants of rice, soybean and perilla will be released to farmers. (author). 198 refs., 26 tabs.,15 figs.

  10. Radiation processing of food: role in national development

    International Nuclear Information System (INIS)

    Sharma, Arun

    2002-01-01

    Radiation technology can be harnessed in several ways depending on the needs. With adequate storage and packaging regimes it increases the possibilities of handling and distribution of farm produce, thereby improving its supply and management. It can add value to the product by improving its hygiene and quarantine. This is becoming increasingly important for ensuring biosecurity in international trade. Being a newly emerging technology from laboratory to market place, it may face several hurdles. These hurdles may involve engineering or technological challenges during scale-up, post-processing handling and management, problems of security of facilities, consumer attitudes and other unforeseen factors. A small beginning has been made in this direction with a setting up of two technology demonstration units, one for spices and other for onion, by the department. The experience of running these two units and a few more that are contemplated the private sector would probably determine the role the technology would play in future in the national development

  11. Development of multifunctional radiation monitoring instrument based on PLC technology

    International Nuclear Information System (INIS)

    Li Ziqiang; Zhu Yuye; Zhuang Min

    2007-01-01

    This eight-channel multifunctional Radiation Monitoring Instrument is developed by making use of the built-in high-speed counters and the powerful instruction system of the SIEMES SIMATICS S7 series Programmable Logic Controllers (PLC) to record and process the pulse signal output by the detectors. The instrument with functions, such as analog and digital display, digital storage of digital data, pulse signal generator, network communication, can connect various types of pulse detectors. The initial process can be translated between Graduation Apparatus method and Formula method. the logicality of the high-dosage warning system is processed itself. The signal output will drive the alarm lights and bell directly. This paper mainly describes the configuration, programming and feature of the instrument. (authors)

  12. Intensity Modulated Radiation Therapy. Development of the technique

    International Nuclear Information System (INIS)

    Rafailovici, L.; Alva, R.; Chiozza, J.; Donato, H.; Falomo, S.; Cardiello, C.; Furia, O.; Martinez, A.; Filomia, M.L.; Sansogne, R.; Arbiser, S.; Dosoretz, B.

    2008-01-01

    Full text: Introduction: Intensity Modulated Radiation Therapy (IMRT) is a result of advances in computer sciences that allowed the development of new technology related to planning and radiation therapy. IMRT was developed to homogenize the dose in the target volumes and decrease the dose in the surrounding healthy tissue. Using a software with high calculation capacity a simultaneous irradiation with different doses in a given volume is achieved. IMRT is based on internal planning. Material and methods: 628 patients were treated with IMRT in prostate lesions, head and neck, breast, thorax, abdomen and brain since August 2008. The software for IMRT is the XIO CMS and the accelerator used is a Varian Clinac 6 / 100. IMRT requires a first simulation, where immobilization systems are selected (mats, thermoplastic masks, among others) and the demarcation of the target structures, healthy tissue and dose prescription by a tattoo. Images of CT / MRI are merged when necessary. Once the system made the treatment optimization, this one is regulated by modulators. These are produced by numerical control machines from digital files produced by software. In a second modulation the planned irradiation is checked and tattoo is carried out according with this. We have a strict process of quality assurance to assess the viability of the plan before its implementation. We use the Map Check it possible to compare the dose on the central axis and the distribution in the whole plane regarding to that generated by the planning system. From 03/2008 the virtual simulation process was implemented integrating the described stages. Results and Conclusions: IMRT is a complex technique. The meticulous planning, implementation of process and quality control allows the use of this technique in a reliable and secure way. With IMRT we achieved a high level of dose conformation, less irradiation of healthy tissue, lower rates of complications and the dose escalation for some tumors. (authors) [es

  13. Factors determining the viability of radiation processing in developing countries

    International Nuclear Information System (INIS)

    Linde, H.J. van der

    1988-01-01

    In the fifteen years since the introduction of radiation processing to South Africa, four commercial irradiation facilities have been established. These are involved in the processing of a large variety of products, from syringes and prostheses to strawberries and sugar yeast. Three of the facilities are devoted mainly to food irradiation and several thousand tonnes are now processed annually. During this period it was repeatedly experienced that the successful introduction of radiation processing in general, and food radurization in particular, on a commercial scale was critically dependent on the following factors: acceptance by the producer, industry and consumer; initial capital expenditure; running costs and overheads in general; and continuous throughput. All of these factors contribute to the processing cost which is the ultimate factor in determining the value/price ratio for the potential entrepreneur and customer of this new technology. After a market survey had identified the need for a new food irradiation facility to cope with the growing interest in commercial food radurization in the Western Cape, the above-mentioned factors were of cardinal importance in the design and manufacture of a new irradiator. The resulting batch-pallet facility which was commissioned in August 1986, is rather inefficient as far as energy utilization is concerned but this shortcoming is compensated for by its low cost, versatility and low hold-up. Although the facility has limitations as far as the processing of really large volumes of produce is concerned, it is particularly suitable not only for developing countries, but for developed countries in the introductory phase of commercial food radurization. (author)

  14. Factors determining the viability of radiation processing in developing countries

    Science.gov (United States)

    van der Linde, HJ; Basson, RA

    In the fifteen years since the introduction of radiation processing to South Africa, four commercial irradiation facilities have been established. These are involved in the processing of a large variety of products, from syringes and prostheses to strawberries and sugar yeast. Three of the facilities are devoted mainly to food irradiation and several thousand tonnes are now processed annually. During this period it was repeatedly experienced that the successful introduction of radiation processing in general, and food radurization in particular, on a commercial scale was critically dependent on the following factors: acceptance by the producer, industry and consumer; initial capital expenditure; running costs and overheads in general; and continous throughput. All of these factors contribute to the processing cost which is the ultimate factor in determing the value/price ratio for the potential entrepreneur and customer of this new technology. After a market survey had identified the need for a new food irradiation facility to cope with the growing interest in commercial food radurization in the Western Cape, the above-mentioned factors were of cardinal importance in the design and manufacture of a new irradiator. The resulting batch-pallet facility which was commisioned in August 1986, is rather inefficient as far as energy utilization is concerned but this shortcoming is compensated for by its low cost, versatility and low hold-up. Although the facility has limitations as far as the processing of really large volumes of produce is concerned, it is particularly suitable not only for developing countries, but for developed countries in the introductory phase of commercial food radurization.

  15. Radiation by the numbers: developing an on-line Canadian radiation dose calculator as a public engagement and education tool

    Energy Technology Data Exchange (ETDEWEB)

    Dalzell, M.T.J. [Sylvia Fedoruk Canadian Centre for Nuclear Innovation, Saskatoon, Saskatchewan (Canada)

    2016-06-15

    Concerns arising from misunderstandings about radiation are often cited as a main reason for public antipathy towards nuclear development and impede decision-making by governments and individuals. A lack of information about everyday sources of radiation exposure that is accessible, relatable and factual contributes to the problem. As part of its efforts to be a fact-based source of information on nuclear issues, the Sylvia Fedoruk Canadian Centre for Nuclear Innovation has developed an on-line Canadian Radiation Dose Calculator as a tool to provide context about common sources of radiation. This paper discusses the development of the calculator and describes how the Fedoruk Centre is using it and other tools to support public engagement on nuclear topics. (author)

  16. Proposal for the development of ICNIRP guidelines on limits for optical radiation exposure

    Energy Technology Data Exchange (ETDEWEB)

    Siekmann, H. [Berufsgenossenschaftliches Institut fuer Arbeitsschutz - FIA, Sankt Augustin (Germany); Reidenbach, H.D. [Fachhochschule Koeln (Germany)

    2004-07-01

    Guidelines on limits of exposure to incoherent ultraviolet radiation, to incoherent visible and infrared radiation and to laser radiation have been published by the International Commission on Non-Ionizing Radiation Protection (ICNIRP). These guidelines are accepted globally and form the basis for risk assessment procedures for optical radiation in many countries. With the appearance of new scientific cognition the ICNIRP guidelines will be revised from time to time. A revision may also concern more formal aspects. Some proposals for the development of the ICNIRP limit value recommendations for optical radiation exposures follow. (orig.)

  17. Technology development for evaluation of operational quantities in radiation protection

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jang Lyul; Chang, S. Y.; Lee, L. T.; Kim, B. H.; Chung, K. K.; Lee, J. I.; Lim, G. S.; Kim, J. S.; Nam, Y. M.; Chang, J. K.; Kim, D. Y.; Yang, J. S

    2000-03-01

    A study on the fabrication of a new personal thermo-luminescence dosimeter, which can evaluate the personal dose equivalent H{sub p}(d), has been performed. Optimum conditions for fabrication of a LiF:Mg,Cu,Na,Si TL phosphor powder has been determined and a disc type TL pellet has been fabricated from this TL powder. Another type of CaSO{sub 4}:Dy,Mo TL material has been also fabricated. These two TL materials have shown greater TL sensitivity than the foreign-made commercial TL materials. Mono-energetic fluorescence X-ray from 8.6 keV to 75 keV for use in performance testing of the developed TLDs energy response have been constructed and evaluated for the performance of the purity, air kerma, beam uniformity and distribution, and scattered fraction of X-rays. Reference neutron field of a D{sub 2}O moderated {sup 252}Cf source was characterized and the irradiation system using {sup 226}Ra and {sup 137}Cs sources was installed to construct the environmental gamma reference radiation and the low-level gamma radiation. A capability of calibration and measurement of KAERI In Vivo counting system for transuranic elements in the lung has been evaluated through the participation in the overseas intercomparison study on the In Vivo radioactivity measurement. An improvement and advancement of KAERI lung counting technology have been made by the analysis off uncertainties from the assumption of uniform radioactivity distribution in the lung, experimental determination and comparing of detection efficiency with different lung sets, and mathematical efficiency calibration of In Vivo counting system. (author)

  18. The effects of ionizing radiations on in utero development

    International Nuclear Information System (INIS)

    Lallemand, J.

    1984-01-01

    Following a reminder of embryology and methodology, a review is made of the main teratogenic effects related to radiation exposure, i.e. lethal effects, radioinduced malformations, maldevelopment and cancers. The sensitivity of the embryo and foetus to radiation seems to last during the whole gestation. Howewer, the latest investigations indicate that the main damage is mental retardation. This review concludes on practical considerations of radiation protection in the field of radiographic examinations of pregnant women [fr

  19. Development of laser ablation plasma by anisotropic self-radiation

    Directory of Open Access Journals (Sweden)

    Ohnishi Naofumi

    2013-11-01

    Full Text Available We have proposed a method for reproducing an accurate solution of low-density ablation plasma by properly treating anisotropic radiation. Monte-Carlo method is employed for estimating Eddington tensor with limited number of photon samples in each fluid time step. Radiation field from ablation plasma is significantly affected by the anisotropic Eddington tensor. Electron temperature around the ablation surface changes with the radiation field and is responsible for the observed emission. An accurate prediction of the light emission from the laser ablation plasma requires a careful estimation of the anisotropic radiation field.

  20. Synchrotron radiation, a powerful tool in research and technological development. Basic principles

    International Nuclear Information System (INIS)

    Jimenez M, J.

    2001-01-01

    The basic principles of synchrotron radiation emission in electron accelerators are presented. The main characteristics of synchrotron radiation, together with the physical principles that describe its interaction with different materials are also discussed. Different areas in which the development of synchrotron radiation has made a major impact are given. (Author)

  1. To the development of numerical methods in problems of radiation transport

    International Nuclear Information System (INIS)

    Germogenova, T.A.

    1990-01-01

    Review of studies on the development of numerical methods and the discrete ordinate method in particular, used for solution of radiation protection physics problems is given. Consideration is given to the problems, which arise when calculating fields of penetrating radiation and when studying processes of charged-particle transport and cascade processes, generated by high-energy primary radiation

  2. Development of Sensor Technology and Its Application for Nuclear Radiation Detection

    International Nuclear Information System (INIS)

    Hiskia

    2007-01-01

    Radiation is energy in the form of waves or moving subatomic particles. Radiation can be ionizing or nonionizing radiation, depending on its effect on atomic matter. Because radiation cannot be seen, felt, tasted, heard or smelled, even at lethal levels, radiations detection devices must be used to alert those exposed to radiation. The measurement of radioactivity in the environment is a regulatory requirement around sites where significant amounts of radioactive materials are used or stored. Recently, advent in microelectronics and material technology has enabled to produce small sensor or microsensor, sensitive, accurate, and integrated in a chip or substrate. Development of radiation sensor technology using thin/thick film and micromachining technique was described in this paper. Indonesian capabilities in radiation sensor research and development and opportunities for commercialization also given. (author)

  3. The Development of Sensor Technology and Application to Detect Nuclear Radiation

    International Nuclear Information System (INIS)

    Hiskia

    2007-01-01

    Radiation is energy in the form of waves or moving subatomic particles. Radiation can be ionizing or non-ionizing radiation, depending on its effect on atomic matter. Because radiation cannot be seen, felt, tasted, heard or smelled, even at lethal levels, radiations detection devices must be used to alert those exposed to radiation. The measurement of radioactivity in the environment is a regulatory requirement around sites where significant amounts of radioactive materials are used or stored. Recently, advent in microelectronics and material technology has enabled to produce small sensor or microsensor, sensitive, accurate, and integrated in a chip or substrate. Development of radiation sensor technology using thin/thick film and micromachining technique was described in this paper. Indonesian capabilities in radiation sensor research and development and opportunities for commercialization also given. (author)

  4. Development of a pico-second start counter

    Energy Technology Data Exchange (ETDEWEB)

    Dickescheid, Michael; Cardinali, Matteo; Corell, Oliver; Hoek, Matthias; Lauth, Werner; Schlimme, Soeren; Sfienti, Concettina; Thiel, Michaela [Institut fuer Kernphysik, Johannes Gutenberg Universitaet Mainz(Germany)

    2015-07-01

    The goal is to develop a hodoscope with a time resolution of less than 50 ps. To achieve this level of precision, the obvious choice is to use the Cherenkov effect because of the prompt photon-production. The detector itself consists of 64 fused-silica radiator bars (5 x 5 x 140 mm{sup 3}) in an 8 x 8 matrix attached to an microchannel plate photomultiplier tube with 64 pixels (one bar per pixel). The segmented radiator design allows improving the time resolution depending on the number of traversed radiator bars. Also the number of detected photons per pixel is important as it improves the time resolution. Signal discrimination will be done using custom-made front-end electronics and a TRB3 system will be used for data acquisition. The performance of the detector is determined using a low intensity electron beam at the MAMI accelerator in Mainz with a momentum of 855 MeV/c. The obtained data are compared to detailed Monte Carlo simulations. In this contribution the experimental setup is described in more detail. Also first preliminary results from the test experiment are shown.

  5. Development, simulation and test of transition radiation detector prototypes for the compressed baryonic matter experiment at the facility for antiproton and ion research

    Energy Technology Data Exchange (ETDEWEB)

    Bergmann, Cyrano S.H.

    2014-07-01

    The focus of this thesis is the development of a Transition Radiation Detector (TRD) for the Compressed Baryonic Matter (CBM) experiment at FAIR. The TRD sub-detector will contribute to the global particle identification and track reconstruction of charged particles. The technical design goal for the TRD is to identify 90% electrons with a maximum pion contamination of 1%. The TRD and Ring Image CHerenkov (RICH) detector should reach a common pion rejection of 10{sup 4}, in order to measure charmonium and low-mass vector mesons. The position resolution should be between 200 and 300 μm in the anode wire direction. The most demanding aspect of the CBM TRD design is the high interaction rate of up to 10{sup 7} Hz resulting in a charged particle rate of up to 100 kHz/cm{sup 2} in the central part of the detector planes at SIS300 conditions. It is crucial to find the optimal radiator detector combination with a minimum material budget to limit scattering and background due to conversions and at the same time reach a sufficient pion rejection and position resolution. In this thesis it is confirmed that a Multi-Wire Proportional Counter (MWPC) with a Xe/CO{sub 2} gas thickness of 12mm provides sufficient absorption probability for TR-photons in combination with self-supporting low density PE foam or micro-structured foil radiators. A continuous investigation aiming at an optimal wire and pad-plane geometry, as well as a minimization of the material budget between active gas and radiator has been presented in hard- and software. A minimum photon absorption cross-section of the entrance window was realized with a thermally stretched aluminized Kapton foil, glued to a G11 support grid support frame. This structure limits the mechanical deformation of the entire window to 1mm/mbar. All MWPC prototypes include two wire planes. A symmetric amplification region of 2 x (3, 3.5 or 4)mm is followed by a short drift region of 6, 5 or 4 mm. The drift region reduces the gain

  6. Development, simulation and test of transition radiation detector prototypes for the compressed baryonic matter experiment at the facility for antiproton and ion research

    International Nuclear Information System (INIS)

    Bergmann, Cyrano S.H.

    2014-01-01

    The focus of this thesis is the development of a Transition Radiation Detector (TRD) for the Compressed Baryonic Matter (CBM) experiment at FAIR. The TRD sub-detector will contribute to the global particle identification and track reconstruction of charged particles. The technical design goal for the TRD is to identify 90% electrons with a maximum pion contamination of 1%. The TRD and Ring Image CHerenkov (RICH) detector should reach a common pion rejection of 10 4 , in order to measure charmonium and low-mass vector mesons. The position resolution should be between 200 and 300 μm in the anode wire direction. The most demanding aspect of the CBM TRD design is the high interaction rate of up to 10 7 Hz resulting in a charged particle rate of up to 100 kHz/cm 2 in the central part of the detector planes at SIS300 conditions. It is crucial to find the optimal radiator detector combination with a minimum material budget to limit scattering and background due to conversions and at the same time reach a sufficient pion rejection and position resolution. In this thesis it is confirmed that a Multi-Wire Proportional Counter (MWPC) with a Xe/CO 2 gas thickness of 12mm provides sufficient absorption probability for TR-photons in combination with self-supporting low density PE foam or micro-structured foil radiators. A continuous investigation aiming at an optimal wire and pad-plane geometry, as well as a minimization of the material budget between active gas and radiator has been presented in hard- and software. A minimum photon absorption cross-section of the entrance window was realized with a thermally stretched aluminized Kapton foil, glued to a G11 support grid support frame. This structure limits the mechanical deformation of the entire window to 1mm/mbar. All MWPC prototypes include two wire planes. A symmetric amplification region of 2 x (3, 3.5 or 4)mm is followed by a short drift region of 6, 5 or 4 mm. The drift region reduces the gain variation due to

  7. Development of food preservation and processing techniques by radiation

    International Nuclear Information System (INIS)

    Byun, Myung Woo; Yook, Hong Sun; Lee, Ju Woon and others

    2000-03-01

    Development of food preservation and processing techniques by radiation was performed. Gamm irradiation at 5 kGy completely eliminated pathogenic bacteria in pork and chicken meats. Gamma irradiation at such doses and subsequent storage at less than 4 deg C could ensure hygienic quality and prolong the microbiological shelf-life resulting from the reduction of spoilage microorganisms. Pork loin ham with desirable color was also developed without using of sodium nitrite that is known as a carcinogen. Safety tests of gamma-irradiated meats in areas such as genotoxicity, acute toxicity, four-week oral toxicity, rat hepatocarcinogenesis and the antioxidative defense system, were not affected by gamma irradiation. Gamma irradiation at about 1 kGy completely eliminated the parasites in foods and drinking water. In the study of quarantine treatment of apple and pear for export by gamma irradiation, current fumigation(MBr) was perfect in its disinfesting capability, but it caused detrimental effects on the physical quality of apple and pear. However, irradiation doses at 1-3 kGy was suitable for controlling pests and did not induce any significant changes in the quality of the products. The result of the survey to assess the public understanding indicated that the irradiated food had somewhat negative impression to general public. Therefore, it is necessary to establish a public education and information program by using mass communication and by constructing communication system to obtain the enhanced impression from the general public

  8. Development of food preservation and processing techniques by radiation

    Energy Technology Data Exchange (ETDEWEB)

    Byun, Myung Woo; Yook, Hong Sun; Lee, Ju Woon and others

    2000-03-01

    Development of food preservation and processing techniques by radiation was performed. Gamm irradiation at 5 kGy completely eliminated pathogenic bacteria in pork and chicken meats. Gamma irradiation at such doses and subsequent storage at less than 4 deg C could ensure hygienic quality and prolong the microbiological shelf-life resulting from the reduction of spoilage microorganisms. Pork loin ham with desirable color was also developed without using of sodium nitrite that is known as a carcinogen. Safety tests of gamma-irradiated meats in areas such as genotoxicity, acute toxicity, four-week oral toxicity, rat hepatocarcinogenesis and the antioxidative defense system, were not affected by gamma irradiation. Gamma irradiation at about 1 kGy completely eliminated the parasites in foods and drinking water. In the study of quarantine treatment of apple and pear for export by gamma irradiation, current fumigation(MBr) was perfect in its disinfesting capability, but it caused detrimental effects on the physical quality of apple and pear. However, irradiation doses at 1-3 kGy was suitable for controlling pests and did not induce any significant changes in the quality of the products. The result of the survey to assess the public understanding indicated that the irradiated food had somewhat negative impression to general public. Therefore, it is necessary to establish a public education and information program by using mass communication and by constructing communication system to obtain the enhanced impression from the general public.

  9. International aspects of isotopes and radiation development and use

    International Nuclear Information System (INIS)

    Fowler, E.E.

    1978-01-01

    Radioisotopes have touched the daily lives of people throughout the world very profoundly and productively. This occurs in medicine, agriculture, industry and research. The International Atomic Energy Agency takes responsibility to assure that the full benefits of this atomic energy development are available to every country, and greatest effort is directed toward increased use of and increased benefits from radioisotopes in developing countries. The objective of the Agency is to accelerate and enlarge the contribution of atomic energy to peace, health and prosperity throughout the world, and in order to attain this objective, the Agency enters into research agreements, awards contracts, and provides technical assistance and other services to the institutions in member states. Moreover, it fosters the exchange of informations through conferences, symposia, seminars and technical committees, as well as the exchange and training of scientists and experts in this field. The Agency is organized into five departments to execute its principal functions: administration, safeguards, technical operations, technical assistance and publications, and research and isotopes. The major activities of the Agency in radioisotope production, stable isotope application, chemical problems in fission and fusion reactors, radiation preservation of foods and others are discussed. (Kako, I

  10. Radiation physics and chemistry of biomolecules. Recent developments

    Science.gov (United States)

    Spotheim-Maurizot, Melanie

    2016-11-01

    A chapter of the book ;Radiation chemistry. From basics to application in materials and life sciences (EDP Science, Paris, France, 2008); was devoted to the state-of-the-art in the research on ionizing radiation (IR) effects on biomolecules. An update, eight years later, seemed pertinent enough to the editors of this journal who accepted to dedicate a Special Issue to the latest developments in this area of high interest for cancer radiotherapy, nuclear workers' radioprotection and food radiosterilisation. We sincerely thank them and the authors who accepted to present reviews of their most recent work. Obviously, only a small part of the research in the fascinating domain of molecular radiobiology can be covered here. Some articles are presenting the contribution of biophysical models and computational techniques to the understanding of IR effects on molecules such as DNA and proteins, or on larger systems such as chromatin, chromosomes and even cells (Nikjoo et al., Štěpán & Davídková, Ballarini & Carante, and Nikitaki et al.). In these papers, as well as in many others, several qualities of IR are compared in order to explain the observed differences of effects. The damages induced by the low energy electrons and new techniques involved in their study are discussed in great detail (Sanche and Fromm & Boulanouar). The chemistry behind the IR induced damages (single or clustered), studied in many laboratories around the world is presented in several papers (Cadet & Wagner, Sevilla et al., Chatgilialoglu et al., and Greenberg). One of them addresses a very useful comparison between the effects of IR and UV exposure on DNA (Ravanat & Douki). The majority of the papers in this Special Issue is dealing with DNA and this reflects the real situation: damages of DNA are more studied than those of other biomolecules. This is due to the role of DNA as main support of hereditary information. Nevertheless, more and more studies are outlining the influence of epigenetic

  11. On advisability of developing automatic complexes of radiation flow detection

    International Nuclear Information System (INIS)

    Akopov, V.S.; Voronin, S.A.; Meshalkin, I.A.

    1976-01-01

    On the basis of mathematical treatment of statistical data obtained by inquest of specialists from a number of factories, problems associated with the determination of the most acceptable efficiency of radiation defectoscopy automatized complexes are considered. Production requirements for radiation control sensitivity are generalized. The use of providing the complexes with computer technique is substantiated

  12. Development of capacity for measuring ionizing radiation in aircraft crew

    International Nuclear Information System (INIS)

    Federico, C.A.; Goncalez, O.L.

    2011-01-01

    This paper describes the activities performed in a research program of the Institute of Advanced Studies, Brazil, belonging to the Brazilian Air Force, joining to researches from Brazilian Nuclear Energy Commission, in order to bring to Brazil the capacity and acknowledge necessary to the evaluation of dose from ionizing radiation originated in the cosmic radiation and its by products which fall on aircraft crews

  13. Development of advanced materials and devices for nuclear radiation measurements

    International Nuclear Information System (INIS)

    Gadkari, S.C.

    2015-01-01

    Single crystals of technologically important materials are grown in the Crystal Technology Section of the Technical Physics Division, BARC. These crystals find applications as scintillators and dosimeters in nuclear radiation detection/measurements. Scintillator crystals of some advanced materials like cerium doped Gd 3 Ga 3 Al 2 O 12 , Lu 2 SiO 5 , YAIO 3 etc and some conventional materials such as Bi 4 Ge 3 O 12 , CsI:Tl, NaI:Tl, etc have been grown from melts using the Czochralski and Bridgman techniques. Portable gamma-ray spectrometers that work from a USB port of a laptop have been developed using the grown scintillator crystals. In recent years there has been a flurry of research activities on materials containing Li 6 , B 10 , etc that have large capture cross-sections for neutrons to develop solid state detectors for neutrons. For this purpose single crystals of cerium doped Li 6 Y(BO 3 ) 3 and silver doped Li 2 B 4 O 7 have been developed. Optical, thermo-luminescence, photo-luminescence and scintillation properties of these crystals have been investigated with a view to develop detectors and dosimeters. The Li 2 B 4 O 7 :Ag is a tissue equivalent material (Z eff = 7.3 close to 7.4 of tissue) useful in the personal and medical dosimetry applications. As the emission of Ag + lies in the UV region (267 nm), a customized TL measurement set-up has been developed using a solar blind PMT that enabled the measurement of very low doses below 5 μGy and linearity up to 100 Gy. Films of CsI:TI in the 10 nm to 3 μm thickness range were deposited on silicon substrates using the physical vapor deposition technique under vacuum conditions. The deposited films investigated using SEM and AFM revealed a columnar growth behavior with a preferential orientation along <200>. The growth of single crystals from melts, recent efforts in the development of detectors and results of experiments conducted to detect thermal neutrons are described. (author)

  14. Development of qualitative evaluation of medical radiation protective apron

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Hui Gyeom; Kim, Tae Hyung; So, Woon Young [Dept. of Radiological Science, Kangwon National University, Chuncheon (Korea, Republic of); Kim, Sang Hyun [Dept. of Radiological Science, Shinhan University, Uijeongbu (Korea, Republic of); Lee, Tae Hui [Dept. of Radiology, Wonju Medical Center, Wonju (Korea, Republic of); Kim, Seung Chul [Dept. of Health Science, Korea University, Seoul (Korea, Republic of); Kim, Jin Tae [Dept. of Materials Research Institute, Truabutment Korea Co., Ltd, Bucheon (Korea, Republic of)

    2017-09-15

    This study proposes effective quality control and maintenance method by developing a new qualitative evaluation method of apron for medical radiation protection. As an experimental material, one of 0.45 mm lead and 100 of 0.45 mm Pb aprons were used and irradiated under the conditions of a tube voltage of 75 kVp and a tube current of 12.5 mAs to obtain an image. and using the Image J program, PSNR values were compared and analyzed. The results showed that there were 40 aprons (less than 11dB), 55 aprons (less than 11dB, less than 30dB), and 5 aprons (30dB or more). In addition, the dose showed a normal distribution for the apron, and 5 aprons with PSNR less than 11dB and 30dB or more were selected and divided into 8 zones, and these groups were statistically significant.

  15. The development of dysprosium-165 hydroxide macroaggregates for radiation synovectomy

    International Nuclear Information System (INIS)

    McLaren, A.B.; Hetherington, E.L.R.; Maddalena, D.J.; Snowden, G.M.

    1988-06-01

    The development of a dysprosium-165 product, Dy-HMA, which is suitable for the radiation synovectomy of arthritic joints is described. Dysprosium-165 is a short-lived (t 1/2 = 139 min) beta-emitter produced by the neutron irradiation of natural dysprosium. Dy-HMA is a suspension of macroaggregated hydroxide particles in saline with the majority of particles in the 3-5 μm range. Studies in rabbits have demonstrated minimal leakage following the intra-articular injection of a knee joint. At 24 hours, the accumulation in the liver is about 0.003% of the injected dose and there is considerably less in other organs and tissue. The use of Dy-HMA has considerable advantages over the presently used yttrium-90 products. The undesired leakage to and subsequent irradiation of other organs is considerably reduced. The period of hospitalisation is reduced from four days to one and the production of 165 Dy in Australia will overcome the difficulties of supply 90 Y from overseas. 21 refs., 1 fig., 18 tabs

  16. The development of computed tomography with synchrotron radiation

    International Nuclear Information System (INIS)

    Takeda, Tohoru; Itai, Yuji; Hyodo, Kazuyuki; Zeniya, Tsutomu; Akatsuka, Takao.

    1993-01-01

    Many types of monochromatic X-ray CT with synchrotron radiation (SR-CT) is being developed in the biomedical fields because of its' sufficient X-ray flux and tunability of energy spectrum. We introduce a SR-CT system to reveal the fine structures of small animal, and to detect a tracer material for functional evaluation of the organs. In the high spatial resolution SR-CT, the detailed structures of skull of live rat was demonstrated 36-μm spatial resolution with 36-μ-m slice thickness. In the high contrast SR-CT, phantom examination with contrast material (iodine) was performed. The 448 μg/ml iodine contrast material was identified. Image quality was not sufficient because of insufficient dynamic range of our sensor 'IP', insufficient dynamic range of our sensor 'IP', small number of projection, scatter contamination and 99 keV contamination (8%). Remarkable improvement is expected by using solid state detector, increasing scan projection, decrease the scatter reduction, and so on. (author)

  17. Development of the radiation inspection system for food materials

    Energy Technology Data Exchange (ETDEWEB)

    Min, Sujung; Kim, Heeyoung; Kim, Myungjin; Lee, Unjang [ORIONENC Co., Seoul (Korea, Republic of)

    2015-10-15

    Radioactive contamination of processed foodstuffs, livestock, marine products, farm products imported from Japan and fishes caught in coastal waters of Korea has become an important social issue. Recently, there are also needs of inspection system for monitoring of public meals such like school feedings of kindergarten, elementary school, middle school, high school and university. Radioactivity inspections of those foods are executed manually with portable measuring instruments or at labs using their samples. But, radioactivity inspections of those foods should execute field survey in real time. In consequence, there are some problem of time delay and low reliability. To protect the health of citizens from radioactivity contained in Japanese marine products imported to Korea, a system to inspect radioactivity in real time is developed. The system is to measure the radioactivity level of farm and marine products and public meals continuously and automatically at inspection sites of an agency checking radiation of imported foodstuffs to determine radioactive contamination. Performance was identified through the performance test (Cs-137 30, 50, 300, 900Bq/kg) at Korea Research Institute of Standards and Science (KRISS). NaI(Tl) detector was satisfied the performance for measurement.

  18. The Development of a Radiation Hardened Robot for Nuclear Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Seung Ho; Kim, Chang Hoi; Seo, Yong Chil (and others)

    2007-04-15

    We has been developed two remotely controlled robotic systems. One is a underwater vehicle for inspection of the internal structures of PWRs and retrieving foreign stubs in the reactor pressure vessels and reactor coolant pipes. The other robotic system consists of a articulated-type mobile robot capable of recovering the failure of the fuel exchange machine and a mini modular mobile robot for inspection of feeder pipes with ultrasonic array sensors in PHWRs. The underwater robot has been designed by considering radiation effect, underwater condition, and accessibility to the working area. The size of underwater robot is designed to enter the cold legs. A extendable manipulator is mounted on the mobile robot, which can restore nuclear fuel exchange machine. The mini modular mobile robot is composed of dual inch worm mechanisms, which are constructed by two gripper bodies that can fix the robot body on to the pipe and move along the longitudinal and to rotate in a circumferential direction to access all of the outer surfaces of the pipe.

  19. Development of qualitative evaluation of medical radiation protective apron

    International Nuclear Information System (INIS)

    Lim, Hui Gyeom; Kim, Tae Hyung; So, Woon Young; Kim, Sang Hyun; Lee, Tae Hui; Kim, Seung Chul; Kim, Jin Tae

    2017-01-01

    This study proposes effective quality control and maintenance method by developing a new qualitative evaluation method of apron for medical radiation protection. As an experimental material, one of 0.45 mm lead and 100 of 0.45 mm Pb aprons were used and irradiated under the conditions of a tube voltage of 75 kVp and a tube current of 12.5 mAs to obtain an image. and using the Image J program, PSNR values were compared and analyzed. The results showed that there were 40 aprons (less than 11dB), 55 aprons (less than 11dB, less than 30dB), and 5 aprons (30dB or more). In addition, the dose showed a normal distribution for the apron, and 5 aprons with PSNR less than 11dB and 30dB or more were selected and divided into 8 zones, and these groups were statistically significant

  20. Development of a noise filter for radiation thickness gagemeter

    International Nuclear Information System (INIS)

    Jee, C. W.; Kim, Y. T.; Lee, H. H.

    1995-01-01

    The objective of this study is to develop a filter which attenuates sensor noises of radiation thickness gagemeters of the fifth stand of TCM No. 1 in Pohang steel works. The thickness control loop for the fifth stand is modelled as a system for filter design, where the system input is the speed control input and the system output is the gagemeter output. In the design of a filter, the system is described by an ARMAX(AutoRegressive Moving-Average with auXiliary input) model. The parameters of this model are then estimated by using a recursive least square method. Secondly, the ARMAX model, the estimated system, is transformed into an observer canonical state space form. Thirdly, Kalman filtering is applied to obtain optimal estimates of the state and hence those of thickness measurements of steel strips. In addition, a separate low pass filter is designed, which is directly applicable to the gagemeter outputs. Finally, the designed filter algorithms are implemented and tested on a VMEbus board computer under VxWorks real-time operating system. (author)

  1. Development of the radiation inspection system for food materials

    International Nuclear Information System (INIS)

    Min, Sujung; Kim, Heeyoung; Kim, Myungjin; Lee, Unjang

    2015-01-01

    Radioactive contamination of processed foodstuffs, livestock, marine products, farm products imported from Japan and fishes caught in coastal waters of Korea has become an important social issue. Recently, there are also needs of inspection system for monitoring of public meals such like school feedings of kindergarten, elementary school, middle school, high school and university. Radioactivity inspections of those foods are executed manually with portable measuring instruments or at labs using their samples. But, radioactivity inspections of those foods should execute field survey in real time. In consequence, there are some problem of time delay and low reliability. To protect the health of citizens from radioactivity contained in Japanese marine products imported to Korea, a system to inspect radioactivity in real time is developed. The system is to measure the radioactivity level of farm and marine products and public meals continuously and automatically at inspection sites of an agency checking radiation of imported foodstuffs to determine radioactive contamination. Performance was identified through the performance test (Cs-137 30, 50, 300, 900Bq/kg) at Korea Research Institute of Standards and Science (KRISS). NaI(Tl) detector was satisfied the performance for measurement

  2. Development of Yb-169 radiation source for new nondestructive inspection

    International Nuclear Information System (INIS)

    Yamabayashi, Hisamichi

    1994-01-01

    As the nondestructive inspection method for large structures, there has been radiography, and X-ray and γ-ray have been used as the radiation. The transmissivity of radiation through materials changes by the energy of the radiation and the density and thickness of the materials. At present about 880 γ-ray radiography apparatuses are used in Japanese private enterprises, and about 70% of them use 192 Ir γ-ray sources, and about 30% use 60 Co or 137 Cs sources. Recently the defect inspection for the worlded parts of thin wall small tubes and so on have become to be regarded as important, and the 169 Yb source that emits lower energy γ-ray is suitable to the purpose. There are many reports that 169 Yb radiography was applied successfully. As the 169 Yb radiation source, pellets and balls are on the market. 169 Yb is made by the neutron irradiation of 168 Yb in nuclear reactors. The characteristics of 169 Yb, the manufacture of 169 Yb radiation sources and the applicability of 169 Yb radiation sources to nondestructive inspection are reported. Also in Japan, many basic experiments on 169 Yb radiation sources have been carried out, and the irradiation apparatuses are small and light, and the control area can be set small. (K.I.)

  3. Development of food preservation and processing techniques by radiation

    International Nuclear Information System (INIS)

    Byun, Myung Woo; Yook, Hong Sun; Lee, Ju Woon and others

    1999-03-01

    Development of food preservation and processing techniques by radiation was performed. Gamma irradiation at 2-10 kGy is considered to be an effective method to control pathogenic bacteria in species including Escherichia coli O157:H7. Gamma irradiation at 5 kGy completely eliminated pathogenic bacteria in beef. Gamma irradiation at such doses and subsequent storage at less than 4 deg C could ensure hygienic quality and prolong the microbiological shelf-life resulting from the reduction of spoilage microorganisms. Gamma irradiation on pre-rigor beef shortens the aging-period, improves tenderness and enhances the beef quality. And, a new beef processing method using gamma irradiation, such as in the low salt sausage and hygienic beef patty was developed. Safety tests of gamma-irradiated meats(beefs: 0-5 kGy; porks: 0-30 kGy) in areas such as genotoxicity, acute toxicity, four-week oral toxicity, rat hepato carcinogenesis and the anti oxidative defense system, were not affected by gamma irradiation. To pre-establish an alternative technique to the toxic fumigant, methyl bromide, which is the current quarantine measure of agricultural products for export and import, some selected agricultural products, such as chestnuts, acorns, red beans and mung beans, were subjected to a preliminary study to confirm the comparative effects of gamma irradiation and MBr fumigant on their disinfestation and quality, thereby preparing the basic data for the practical approach.Current fumigation(MBr) was perfect in its disinfecting capability, but it caused detrimental effects on the physical quality of agricultural produce. However, irradiation doses suitable for controlling pests did not induce any significant changes in the quality of the products. (author)

  4. Technology Development for Radiation Dose Measurement and Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Bong Hwan; Chang, S. Y.; Lee, T. Y. (and others)

    2007-06-15

    The correction factors essential for the operation of In-Vivo counting system were produced and implemented into a field operation for the improvement of accuracy in measurement of the radioactivity inside a human body. The BiDAS2007 code which calculate an internal dose was developed by upgrading the former code prepared in the previous stage of this project. The method of using the multibioassy data, the maximum likelihood function and the Bayesian statistics were established to an internal dose based on the measurement data of radioactivity, intakes and retention of radioactivity in a human body and it can improve the accuracy in estimation of the intakes of radioactivity and the committed effective dose equivalent. In order to solve the problem of low detection efficiency of the conventional Bonner Sphere (BS) to a high energy neutron, the extended BS's were manufactured and the technique for neutron field spectrometry was established. The fast neutron and gamma spectrometry system with a BC501A scintillation detector was also prepared. Several neutron fluence spectra at several nuclear facilities were measured and collected by using the extended BS. The spectrum weighted responses of some neutron monitoring instruments were also derived by using these spectra and the detector response functions. A high efficient TL material for the neutron personal dosimeter was developed. It solved the main problem of low thermal stability and high residual dose of the commercial TLDs and has the sensitivity to neutron and to gamma radiation with 40 and 10 times higher respectively than them.

  5. Development of aerial gamma radiation survey system III

    International Nuclear Information System (INIS)

    Nagaoka, Toshi; Sakamoto, Ryuichi; Saito, Kimiaki; Tsutsumi, Masahiro; Moriuchi, Shigeru; Miyasaka, Satoshi.

    1985-01-01

    An aerial gamma-ray survey system using a helicopter has been developed since 1980 in order to perform quick gamma-ray survey covering a wide area. To form a line in the chain of the development, a series of flight measurements were conducted in Watarase reservoir, Tochigi prefecture, in which artificial gamma-ray fields were realized using 60 Co (100 and 400 mCi) and 137 Cs (100 and 300 mCi) point sources located on the ground. For the purpose of obtaining gamma-ray pulse height spectra in the field, 6 sets of NaI(Tl) scientillation detectors were prepared. These sets of detectors consist of ones for evaluation with high accuracy as the standard, for intercomparison with other authors' results, and for practical use. Two sets of them were boarded for each flight considering the exposure rate level and detector's sensitivity. The flight measurements were performed in a space of 20 m to 500 m in altitude, and 0 m to 500 m in horizontal distance from the source. The experimental results of the spatial gamma-ray distribution for each gamma-ray field satisfactorily agreed with calculational results by Monte Carlo method. Throughout this experiment, characteristics of this survey system and detectors were clarified, and versatile data processing and analysis code was completed. Also, a method for subtraction of background exposure rate in a field including artificial radiation component was discussed using energy band information, and the coefficients for this method were determined. These data obtained are expected to be used as widely applicable data not only for the interpretation of measured value, but also for analysis of environmental gamma-ray field. (author)

  6. Development of an education and training programme for radiation protection officers in facilities and activities

    International Nuclear Information System (INIS)

    Mutwamezi, Tekla

    2015-02-01

    Education and training is a crucial matter in radiation protection and it is considered a regulatory requirement. For this reason, this project work focused on developing an education and training programme for Radiation Protection Officers whose overall function is to oversee radiation protection and safety at the work place. The developed education and training programme has adopted both the class room based and on the job training methods. Additionally, the programme is organized into 6 modules and focuses on fundamentals of radioactivity; biological effects; legislation; principles of radiation protection; assessment and protection against occupational exposure; medical exposure (only applicable to Radiation Protection Officers in the medical sector) and emergency preparedness and response. The purpose of the programme is to provide Radiation Protection Officers with the basic knowledge and skills to function effectively to meet radiation safety and regulatory requirements. (au)

  7. Technologies Enabling Custom Radiation-Hardened Component Development, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Two primary paths are available for the creation of a Rad-Hard ASIC. The first approach is to use a radiation hardened process such as existing Rad-Hard foundries....

  8. Radiation protection and the development of nuclear power plants

    International Nuclear Information System (INIS)

    Bovard, P.; Fitoussi, L.

    1975-01-01

    Radiological hazards are defined. Following a short explanation of the International Commission on Radiation Protection's permissible values of exposure, some indicators are given about the component of natural radioactivity [fr

  9. Developing a national radiation oncology registry: From acorns to oaks.

    Science.gov (United States)

    Palta, Jatinder R; Efstathiou, Jason A; Bekelman, Justin E; Mutic, Sasa; Bogardus, Carl R; McNutt, Todd R; Gabriel, Peter E; Lawton, Colleen A; Zietman, Anthony L; Rose, Christopher M

    2012-01-01

    The National Radiation Oncology Registry (NROR) is a collaborative initiative of the Radiation Oncology Institute and the American Society of Radiation Oncology, with input and guidance from other major stakeholders in oncology. The overarching mission of the NROR is to improve the care of cancer patients by capturing reliable information on treatment delivery and health outcomes. The NROR will collect patient-specific radiotherapy data electronically to allow for rapid comparison of the many competing treatment modalities and account for effectiveness, outcome, utilization, quality, safety, and cost. It will provide benchmark data and quality improvement tools for individual practitioners. The NROR steering committee has determined that prostate cancer provides an appropriate model to test the concept and the data capturing software in a limited number of sites. The NROR pilot project will begin with this disease-gathering treatment and outcomes data from a limited number of treatment sites across the range of practice; once feasibility is proven, it will scale up to more sites and diseases. When the NROR is fully implemented, all radiotherapy facilities, along with their radiation oncologists, will be solicited to participate in it. With the broader participation of the radiation oncology community, NROR has the potential to serve as a resource for determining national patterns of care, gaps in treatment quality, comparative effectiveness, and hypothesis generation to identify new linkages between therapeutic processes and outcomes. The NROR will benefit radiation oncologists and other care providers, payors, vendors, policy-makers, and, most importantly, cancer patients by capturing reliable information on population-based radiation treatment delivery. Copyright © 2012 (c) 2010 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved. Published by Elsevier Inc. All rights reserved.

  10. Development of a distributed radiation detection system using optical fibers

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, F; Inouchi, Goro; Takada, Eiji; Takahashi, Hiroyuki; Iguchi, Tetsuo; Nakazawa, Masaharu [Tokyo Univ. (Japan). Faculty of Engineering; Kakuta, Tsunemi

    1996-07-01

    We have confirmed the importance of temperature and dose rate for the response of Ge-doped fibers to radiation. A phenomenological model have been found to account for temperature and dose rate effects. From this model it is possible to make dose predictions from attenuation measurements when the temperature and dose rate are known. Ge-doped fibers have been found to have a relatively low sensitivity to both neutron and gamma radiation. In addition, temperature and dose rate dependencies complicate the analysis. However we point out that these problems may all be solved if we use fibers, such as P-doped fibers, which contain color centers of long lifetime. This would remove both the temperature and dose rate dependencies that complicate the use of Ge-doped fibers, in addition the radiation sensitivity is increased. Finally OTDR has been investigated as a possible read-out method for distributed radiation measurements. For our system the minimum pulse length was 3ns, giving a spatial resolution in the meter range and a response length to radiation of about 10 m if accurate dose values where to be obtained. We found OTDR to be a suitable method for radiation induced attenuation measurements in optical fibers, especially for long fiber lengths and long time scales where questions of light source stability becomes important for other systems. (S.Y.)

  11. Influence of radiation-induced apoptosis on development brain in molecular regulation

    International Nuclear Information System (INIS)

    Gu Guixiong

    2000-01-01

    An outline of current status on the influence of radiation on the development brain was given. Some genes as immediate early gene, Bcl-2 family, p53, heat shock protein and AT gene play an important regulation role in ionizing radiation-induced development brain cells apoptosis. And such biological factor as nerve growth factor, interleukin-1, tumor necrosis factor, basic fibroblast growth factor, transforming growth factor and so on have a vital protection function against ionizing radiation-induced cells apoptosis

  12. The development and current status of the technology of isotope and radiation in China

    Energy Technology Data Exchange (ETDEWEB)

    Zhifu, Luo [Dept. of Isotope, China Inst. of Atomic Energy, Beijing, BJ (China)

    1998-10-01

    The research and application of the technology of isotopes and radiation have been reviewed. Since the setup of the China`s first nuclear reactor at China Institute of Nuclear Energy in 1958, the technology of isotopes and radiation has been developed significantly. A research and application system has formed a considerable state. The technology of isotopes and radiation has been taken into the fields of industry, agriculture, medicine, and scientific research. The main achievements are on radiopharmaceuticals, radiation source, radiation process, and radioactive tracers. (author)

  13. Update application and development of radiation sterilization technology on pharmacy eutical industry

    International Nuclear Information System (INIS)

    Zhao Yongfu; Nanjing Univ., Nanjing; Wang Changbao; Wang Chao

    2006-01-01

    Since 'Standard of Radiation Sterilization by 60 Co Irradiator on Chinese Medicine' has been cleared, radiation sterilization technology obtains the widespread application on pharmacy. In this paper, the newest application and development of this technology on pharmacy are introduced from several aspects, such as dose control, drugs packing, the influence of radiation on functional ingredients and so on. Aimed at the current problem of radiation sterilization on pharmacy of our country, concrete measure is proposed. And the application of radiation sterilization on health food, enzyme preparation and controlled-release capsule is specially introduced. (authors)

  14. Establishment of comprehensive promotion plan for utilization, research and development of radiation and radioisotopes

    International Nuclear Information System (INIS)

    Choi, Young Myung; Kim, H. J.; Ham, C. H.; Yang, M. H.; Chung, W. S.; Park, K. B.; Jin, J. H.; Song, H. S.; Nho, Y. C.; Byun, M. W.; Kim, J. R.; Han, H. S.; Chung, Y. S.; Yun, P. M.; Lee, H. Y.; Seo, K. W.; Chang, S. Y.; Kee, S. R.; Lhu, S. R.; Choi, Y. S.

    1997-05-01

    This study surveys state-of-art radiation/RI industries and research organizations and their activities. The major objective of the survey is to collect useful information on the status of these industries, discuss issues concerning radiation /RI utilization. We, therefore, send questionnaires to field workers engaged in RI industries and research organizations to feedback on real field issues and problems. Considering the specificity and diversity of the radiation / RI area, six sectors are set up for its promotion. Each sector includes status analysis, active promotion measures and implementation plans. Six areas are as follows; 1) systematic developments of radiation /RI utilization technologies covers technology development for industrial applications, technology development for agricultural applications, technology development for medical applications, development of RI and radiation generators, and expansion of infra-structure for enhancement of radiation / RI utilization, and fostering radiation science. 2) activation of radiation / RI indusries 3) rationalization of radiation / RI regulation 4) international cooperation, 5) manpower development 6) finance. (author). 14 refs., 34 tabs., 5 figs

  15. Radiation carcinogenesis in dogs irradiated during prenatal and postnatal development

    Energy Technology Data Exchange (ETDEWEB)

    Benjamin, S.A.; Saunders, W.J.; Angleton, G.M.; Lee, A.C. (Colorado State Univ., Fort Collins, CO (Unites States). Coll. of Veterinary Medicine and Biomedical Sciences)

    1991-12-01

    To evaluate the lifetime hazards of ionizing radiation exposure, 1680 beagles recieved whole-body, 60-cobalt gamma exposures or sham-exposures during development. Eight groups of 120 dogs each recieved mean doses of 16 or 83 cGy at 8 (preimplantation), 28 (embryonic), or 55 (late fetal) days postcoitus (dpc), or 2 (neonatal) days postpartum (dpp). One group of 120 dogs received 83 cGy at 70 dpp (juvenile), and one group of 240 dogs received 83 cGy at 365 dpp (young adult). Sham-irradiations were delivered to 360 controls. Sexes were equally represented. Young dogs, up to 4 years of age, had an increase in benign and malignant neoplasms after irradiation in the perinatal period at 55 dpc or 2 dpp. Among these, 4 fatal cancers were observed. No malignancies occurred in comparably-aged controls. The increase in both fatal neoplasms and all neoplasms in the perinatally-exposed groups were statistically significant. Over the full lifetime, dogs irradiated in the perinatal period also had the strongest evidence for an increased risk for fatal malignancies of all types. Though not as strong, there was a trend for increased risk for fatal cancer in dogs irradiated at all other ages. The risk of fatal malignancy after irradiation was greater in females than in males. Dogs exposed at 55 dpc had a significant increase in lymphoid neoplasia and dogs exposed at 8 and 55 dpc had increased risk for hemangiosarcoma. There was no evidence for an increased risk for mammary carcinoma in irradiated females. Dogs exposed as juveniles at 70 dpp had a significant increase in all benign and malignant thyroid neoplasms, including fatal thyroid carcinoma. (author) 40 refs.

  16. Radiation carcinogenesis in dogs irradiated during prenatal and postnatal development

    International Nuclear Information System (INIS)

    Benjamin, S.A.; Saunders, W.J.; Angleton, G.M.; Lee, A.C.

    1991-01-01

    To evaluate the lifetime hazards of ionizing radiation exposure, 1680 beagles recieved whole-body, 60-cobalt gamma exposures or sham-exposures during development. Eight groups of 120 dogs each recieved mean doses of 16 or 83 cGy at 8 (preimplantation), 28 (embryonic), or 55 (late fetal) days postcoitus (dpc), or 2 (neonatal) days postpartum (dpp). One group of 120 dogs received 83 cGy at 70 dpp (juvenile), and one group of 240 dogs received 83 cGy at 365 dpp (young adult). Sham-irradiations were delivered to 360 controls. Sexes were equally represented. Young dogs, up to 4 years of age, had an increase in benign and malignant neoplasms after irradiation in the perinatal period at 55 dpc or 2 dpp. Among these, 4 fatal cancers were observed. No malignancies occurred in comparably-aged controls. The increase in both fatal neoplasms and all neoplasms in the perinatally-exposed groups were statistically significant. Over the full lifetime, dogs irradiated in the perinatal period also had the strongest evidence for an increased risk for fatal malignancies of all types. Though not as strong, there was a trend for increased risk for fatal cancer in dogs irradiated at all other ages. The risk of fatal malignancy after irradiation was greater in females than in males. Dogs exposed at 55 dpc had a significant increase in lymphoid neoplasia and dogs exposed at 8 and 55 dpc had increased risk for hemangiosarcoma. There was no evidence for an increased risk for mammary carcinoma in irradiated females. Dogs exposed as juveniles at 70 dpp had a significant increase in all benign and malignant thyroid neoplasms, including fatal thyroid carcinoma. (author) 40 refs

  17. Research and development of radiation processing of polysaccharide in Indonesia

    International Nuclear Information System (INIS)

    Rekso, Gatot Trimulyadi

    2007-01-01

    The research activities on natural polymer in Indonesia, especially chitosan as growth promoters and carrageenan for hydrogel are summarized. Isolation processes of chitin from shrimp shell were developed and the technology was transferred to fishing villages in north and south seaside Java Island. Chitosan with 80.5% degree of deacetylation was irradiated in dry solid, wet and aqueous solution at a dose of 50 kGy by gamma ray from Co-60 source. Irradiation of chitosan in aqueous solution gives the highest decreasing of molecule weight from 1.6 x 10 4 become 1.1 x 10 4 . A large field experiment was carried out at a field of red chili in cooperation with farmer in the village. The irradiated chitosan were dissolved in water and 300 mL of water that contains concentration of 50 ppm chitosan was sprayed to red chili plant three times a week for each plant. Irradiation of chitosan in dry solid condition gives the highest degree of height growth of plant to 50.2% and the degree of growth promotion to 92.6%. The production yield was around 60% higher than without using irradiated chitosan. Modification of kappa carrageenan (κC) has been carried out by radiation co-crosslinking with poly(N-vinylpyrrolidone) (PVP) to prepare a new material. Solution of κC was mixed with PVP solution at various concentrations. PVP-κC hydrogel was obtained by irradiation of the solution with electron beams. The best condition for co-crosslinking of κC with PVP was established. The PVP-κC hydrogel can be used as a matrix for immobilization of bioactive materials and wound dressing. (author)

  18. Developing a training program for radiation protection officers in industrial radiography

    International Nuclear Information System (INIS)

    Kinda, R.

    2013-04-01

    Non-Destructive Testing employs a variety of techniques which are used to test objects e.g. pipes, vessels, welded joints, castings and other devices for imperfections without interfering with their physical structure. The common methods of testing include magnetic particle, ultrasound, dye penetrant and industrial radiography using gamma emitting radiation sources and electronic x-ray emitting devices. Other methods used are acoustic emission testing, acoustic resonance testing, electromagnetic testing, infrared testing and leak testing. This project work focuses on training of RPOs in the areas where radiation is used, as improper use may lead to high radiation exposure. In order to ensure adequate protection and safety of staff and the public, the Radiation Protection Officers need to be thoroughly trained. With proper training the Radiation Protection Officer will have the ability to interpret legislative instruments and understand the requirements. The RPO will also be able to develop a Radiation Protection Plan and train fellow staff on radiation safety issues. A number of companies currently specialize in Industrial Radiography and this number is growing on a yearly basis. Since the increased use of radiation sources cannot be curbed, training Radiation Protection Officers will improve the radiation safety standards within these companies and promote the safe use of the radiation sources. Therefore this project covers the fundamental elements required to train Radiation Protection Officers in Industrial Radiography. (author)

  19. Study on production of useful metabolites by development of advanced cell culture techniques using radiation

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Byung Yeoup; Kim, Jinhong; Lee, Seung Sik; Bai, Hyounwoo; An, Byung Chull; Lee, Eun Mi; Lee, Jae Taek; Kim, Mi Ja

    2010-12-15

    The purpose of this project is improvement of investigation, materialization and evaluation techniques on effectiveness for functional natural compounds throughout development of tissue/cell culture techniques for mass production of useful metabolites using radiation. Research scope includes Development of a technique for radiation tissue and cell culture, Database construction for radiation response in plants and radiation effects, Construction of general-purpose national based techniques of cell culture technique using radiation. Main results are as follow: Isolation and identification of radiation induced basI gene; Determination of stresses sensitivities by transformating basI gene into arabidopsis; Isolation and identification of radiation induced chaperon proteins (PaAhpC and yPrxII) from Pseudomonas and yeast, and structural and functional analysis of the proteins; Determination of oxidative and heat resistance by transformating PaAhpC; Isolation and identification of maysin and its derivatives from centipedgrass; Investigation of enhancement technique for improving maysin and its derivatives production using radiation; Investigation of removing undesirable color in maysin and its derivatives using radiation; Determination of the effect of radiation on physiological functions of centipedgrass extracts; Identification of H{sub 2}O{sub 2} removing enzyme in radiation irradiated plant (Spinach); Determination of the effects of centipedgrass extracts on anti-obesity and anti-cancer activities.

  20. Palliative radiation therapy for overloading radiotherapy centre, especially for developing country

    International Nuclear Information System (INIS)

    Myo, M.; Susworo; San, T.

    2001-01-01

    In a developing country, most of the cancer cases are diagnosed in the advanced stages. So, the palliative radiation therapy is the only choice of therapy for these inoperable cases where chemotherapy is not effective or affordable. In conventional radiation therapy, a daily dose of 200 cGy for total 4000 cGy in more than 20 fractions (sometimes, up to 6000 cGy) is used. By using linear-quadratic model theory of cell killing by radiation, it can be calculated early and late effects by using alpha and beta ratio. This theory is still the best for radiation cell killing until the new detail one is discovered. These data are obtained by experimental as well as clinical results. The effective radiation dose can be calculated by using the data to different organs which is involved in the radiation fields. This can change the daily dose to palliative cases in which the late effect is unnecessary. The daily doses can be 300, 400, 500, and sometimes 1000 cGy per single fraction. These modalities are well documented. It is recommend to change the short term high-dose palliative radiation therapy instead of using conventional palliative radiation therapy in overloading radiotherapy centre, especially for developing country. The reasons are mainly radiation protection aspect, not only for the patients and those who involved with the radiation therapy but also to reduce the unnecessary radiation exposure to the environment. (author)

  1. Study on production of useful metabolites by development of advanced cell culture techniques using radiation

    International Nuclear Information System (INIS)

    Chung, Byung Yeoup; Kim, Jinhong; Lee, Seung Sik; Bai, Hyounwoo; An, Byung Chull; Lee, Eun Mi; Lee, Jae Taek; Kim, Mi Ja

    2010-12-01

    The purpose of this project is improvement of investigation, materialization and evaluation techniques on effectiveness for functional natural compounds throughout development of tissue/cell culture techniques for mass production of useful metabolites using radiation. Research scope includes Development of a technique for radiation tissue and cell culture, Database construction for radiation response in plants and radiation effects, Construction of general-purpose national based techniques of cell culture technique using radiation. Main results are as follow: Isolation and identification of radiation induced basI gene; Determination of stresses sensitivities by transformating basI gene into arabidopsis; Isolation and identification of radiation induced chaperon proteins (PaAhpC and yPrxII) from Pseudomonas and yeast, and structural and functional analysis of the proteins; Determination of oxidative and heat resistance by transformating PaAhpC; Isolation and identification of maysin and its derivatives from centipedgrass; Investigation of enhancement technique for improving maysin and its derivatives production using radiation; Investigation of removing undesirable color in maysin and its derivatives using radiation; Determination of the effect of radiation on physiological functions of centipedgrass extracts; Identification of H 2 O 2 removing enzyme in radiation irradiated plant (Spinach); Determination of the effects of centipedgrass extracts on anti-obesity and anti-cancer activities

  2. The United States Atomic Energy Commission programme on isotopes and radiation development and its industrial impact

    Energy Technology Data Exchange (ETDEWEB)

    Fowler, E E [United States Atomic Energy Commission, Division of Isotopes Development, Washington, DC (United States)

    1965-02-01

    The US Atomic Energy Commission isotopes development programme is directed towards (a) encouraging development of beneficial applications of radioisotopes and radiation technology, particularly those designed to meet problems of urgent public interest; (b) accelerating the potential contribution of radioisotopes and radiation applications to the national economy and welfare, and (c) contributing to world development in the peaceful uses of atomic energy. The programme is administered by the Division of Isotopes Development. The programme objectives are being achieved through a multiphase research and development programme including the following major elements: (1) Radiation pasteurization of food, involving development of technology for low dose radiation processing of representative fruit and fishery products to extend their refrigerated shelf life; (2) Process radiation development, directed to fostering development of a broad technology leading to productive use of mega curie quantities of fission products and other radioisotopes for process radiation purposes; (3) Radioisotope technology development, directed to creating a broad base of new and improved technology required for extending and speeding up the application of radioisotopes in science and technology; (4) Radioisotope production and separation technology, directed to insuring availability of radioisotopes to meet the changing needs of advancing science and technology in the USA; (5) Isotopic power and heat sources development, aimed at the development and production of isotopic fuels and fuel forms for a broad spectrum of thermal applications, including SNAP auxiliary electrical power devices; (6) Analysis and applications, whose objective is to identify and analyse radioisotope and radiation research and development activities in the United States of America and abroad; to establish channels of communication with science, government, and industry, and to encourage broad dissemination and productive

  3. Developing new serious games tools to improve radiation protection

    International Nuclear Information System (INIS)

    Majersky, T.; Rapant, T.; Bayer, M.; Majersky, D.

    2008-01-01

    In this paper, novel software technologies for simulation and training of workers in radiologically dangerous conditions are presented. Such new software tools enable the radiation protection managers and workers to better evaluate, visualize and intuitively understand the radiation situation. In the first part of the paper, virtual reality planning tool ALPLANNER is introduced. ALPLANNER enables computation of worker's doses and 3D simulation of planned activities in the environment. In the second part of the paper , a software technology SP ACEVISION for real-time interactive 3D visualization of radioactivity is presented. Radiation fields can be spatially and dynamically visualized in the environment using computer games technologies. Such real-time visualization can be used by RP staff to compute and visualize direct responses of the radiation field to the effects of shielding. Another presented application is determination and visualization of activity sources in inhomogeneous radiation fields. Practical example of how the mentioned software technologies are used during the decommissioning of NPP A-1 Jaslovske Bohunice is provided. Practical example of how the mentioned software technologies are used during the decommissioning of NPP A-1 Jaslovske Bohunice is provided. (authors)

  4. Developing new serious games tools to improve radiation protection

    International Nuclear Information System (INIS)

    Majersky, T.; Rapant, T.; Bayer, M.; Majersky, D.

    2009-01-01

    In this paper, novel software technologies for simulation and training of workers in radiologically dangerous conditions are presented. Such new software tools enable the radiation protection managers and workers to better evaluate, visualize and intuitively understand the radiation situation. In the first part of the paper, virtual reality planning tool ALPLANNER is introduced. ALPLANNER enables computation of worker's doses and 3D simulation of planned activities in the environment. In the second part of the paper , a software technology SP ACEVISION for real-time interactive 3D visualization of radioactivity is presented. Radiation fields can be spatially and dynamically visualized in the environment using computer games technologies. Such real-time visualization can be used by RP staff to compute and visualize direct responses of the radiation field to the effects of shielding. Another presented application is determination and visualization of activity sources in inhomogeneous radiation fields. Practical example of how the mentioned software technologies are used during the decommissioning of NPP A-1 Jaslovske Bohunice is provided. Practical example of how the mentioned software technologies are used during the decommissioning of NPP A-1 Jaslovske Bohunice is provided. (authors)

  5. Development of a radiation-responsive gene expression system

    International Nuclear Information System (INIS)

    Ogawa, Ryohei; Morii, Akihiro; Watanabe, Akihiko

    2013-01-01

    We have obtained a promoter enhancing expression of a gene of our interest connected downstream after activation in response to radiation stimulation and it could be used in radiogenetic therapy, a combination between radiotherapy and gene therapy. The promoter has been chosen out of a library of DNA fragments constructed by connecting the TATA box to randomly combined binding sequences of transcription factors that are activated in response to radiation. Although it was shown that the promoter activation was cell type specific, it turned out that radiation responsive promoters could be obtained for a different type of cells by using another set of transcription factor binding sequences, suggesting that the method would be feasible to obtain promoters functioning in any type of cells. Radiation reactivity of obtained promoters could be improved by techniques such as random introduction of point mutations. The improved promoters significantly enhanced expression of the luciferase gene connected downstream in response to radiation even in vivo, in addition, a gene cassette composed of one such promoter and the fcy::fur gene was confirmed useful for suicide gene therapy as shown in vitro simulation experiment, suggesting possible clinical application. (author)

  6. Study on production of useful metabolites by development of advanced cell culture techniques using radiation

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Byung Yeoup; Lee, Seung Sik; Bai, Hyounwoo; Singh, Sudhir; Lee, Eun Mi; Hong, Sung Hyun; Park, Chul Hong; Srilatha, B.; Kim, Mi Ja; Lee, Ohchul

    2012-01-15

    The purpose of this project is improvement of investigation, materialization and evaluation techniques on effectiveness for functional natural compounds throughout development of tissue/cell culture techniques for mass production of useful metabolites using radiation. Research scope includes Development of a technique for radiation tissue and cell culture, Database construction for radiation response in plants and radiation effects, Construction of general-purpose national based techniques of cell culture technique using radiation. Main results are as follow: Development of a technique for radiation tissue and cell culture for Erigeron breviscapus (Vant.) Hand. Mazz.; Identification and functional analysis of AtTDX (chaperone and peroxidase activities); Functional analysis of radiation(gamma ray, electron beam, and proton beam) induced chaperon protein activities (AtTDX); Determine the action mechanism of yPrx2; Development of transgenic plant with bas I gene from Arabidopsis; Development of transgenic plant with EoP gene from centipedegrass; Identification of radiation induced multi functional compounds from Aloe; Determination of the effects of radiation on removing undesirable color and physiological activities (Schizandra chinensis baillon, centipedegrass); Determine the action mechanism of transgenic plant with 2-Cys Prx for heat stress resistance; Determination of the effects of centipedegrass extracts on anti-cancer activities; Functional analysis of centipedegrass extracts (anti-virus effects)

  7. Development of quality control procedures at a new radiation therapy centre

    International Nuclear Information System (INIS)

    Cooper, A.

    1999-01-01

    Before patients can be treated with radiation therapy, the radiation therapist must be certain that the equipment is functioning within specified parameters. When commencing a new service, introducing appropriate Quality Control procedures on all equipment can be a major accomplishment. At the North Queensland Oncology Service, the Radiation Therapists are responsible for the daily Quality Control on all the radiation therapy equipment. The documentation and procedures were developed by radiation therapists to ensure that all machine parameter discrepancies would be detected before a patient was treated. Monthly Quality Control is the responsibility of the Physics Department. These are carried out on the bi-weekly service days rostered for each linear accelerator and monthly for the simulator. Ongoing Quality Control and Maintenance Meetings ensures reporting and feedback is ongoing between the Radiation Therapists and Physicists. All other liaising is done through the Deputy Chief Radiation Therapist and Senior Physicist. Copyright (1999) Australian Institute of Radiography

  8. Development of software for estimating clear sky solar radiation in Indonesia

    Science.gov (United States)

    Ambarita, H.

    2017-01-01

    Research on solar energy applications in Indonesia has come under scrutiny in recent years. Solar radiation is harvested by solar collector or solar cell and convert the energy into useful energy such as heat and or electricity. In order to provide a better configuration of a solar collector or a solar cell, clear sky radiation should be estimated properly. In this study, an in-house software for estimating clear sky radiation is developed. The governing equations are solved simultaneously. The software is tested in Medan city by performing a solar radiation measurements. For clear sky radiation, the results of the software and measurements ones show a good agreement. However, for the cloudy sky condition it cannot predict the solar radiation. This software can be used to estimate the clear sky radiation in Indonesia.

  9. Recent developments and trends in radiation protection measuring techniques

    International Nuclear Information System (INIS)

    Maushart, R.

    1993-01-01

    Measuring instruments used in radiation protection have undergone dramatic changes over the past decade. But also the attitude of users vis-a-vis this equipment is changing. This is reflected in changes in equipment concepts, the trend being towards 'considerate equipment' which does not absorb the user's attention, but reserves it for the real proposes of radiation protection. Just measuring is no longer enough. Measured data acquisition and evaluation must be integrated more closely, and more specifically, into an overall process of optimized in-plant radiation protection. A key role in this scheme is played by the application-oriented user interface, while measurement and testing routines become more and more automated. The technology now available for storing programs and data, interconnecting and displaying them in many ways, offers almost unlimited possibilities

  10. Development of semiconductor radiation sensors for portable alarm-dosimeter

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Y. K.; Moon, B. S.; Chung, C. E.; Hong, S. B.; Kim, J. Y.; Kim, J. B.; Han, S. H.; Lee, W. G. [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2001-01-01

    We studied Semiconductor Radiation Sensors for Portable Alarm-Dosimeter. We calculated response functions for gamma energy 0.021, 0.122, 0.662, 0.835, 1.2 MeV using EGS4 codes. When we measured at various distance from source to detector, the detection efficiency of Si semiconductor detector was better than that of GM tube. The linear absorption coefficients of steel and aluminum plate were measured. These experimental results of the response of detector for intensity of radiation field coincide to the theoretical expectation. The count value of Si detector was changed with changing thickness of steel as changing threshold voltage of discriminator, and the linear absorption coefficient increased with increasing threshold voltage. Radiation detection efficiency shows difference at each threshold voltage condition. This results coincided to the theoretical simulation. 33 refs., 27 figs., 8 tabs. (Author)

  11. Development of advanced radiation monitors for pulsed neutron fields

    CERN Document Server

    AUTHOR|(CDS)2081895

    The need of radiation detectors capable of efficiently measuring in pulsed neutron fields is attracting widespread interest since the 60s. The efforts of the scientific community substantially increased in the last decade due to the increasing number of applications in which this radiation field is encountered. This is a major issue especially at particle accelerator facilities, where pulsed neutron fields are present because of beam losses at targets, collimators and beam dumps, and where the correct assessment of the intensity of the neutron fields is fundamental for radiation protection monitoring. LUPIN is a neutron detector that combines an innovative acquisition electronics based on logarithmic amplification of the collected current signal and a special technique used to derive the total number of detected neutron interactions, which has been specifically conceived to work in pulsed neutron fields. Due to its special working principle, it is capable of overcoming the typical saturation issues encountere...

  12. NAIRAS aircraft radiation model development, dose climatology, and initial validation

    Science.gov (United States)

    Mertens, Christopher J.; Meier, Matthias M.; Brown, Steven; Norman, Ryan B.; Xu, Xiaojing

    2013-10-01

    The Nowcast of Atmospheric Ionizing Radiation for Aviation Safety (NAIRAS) is a real-time, global, physics-based model used to assess radiation exposure to commercial aircrews and passengers. The model is a free-running physics-based model in the sense that there are no adjustment factors applied to nudge the model into agreement with measurements. The model predicts dosimetric quantities in the atmosphere from both galactic cosmic rays (GCR) and solar energetic particles, including the response of the geomagnetic field to interplanetary dynamical processes and its subsequent influence on atmospheric dose. The focus of this paper is on atmospheric GCR exposure during geomagnetically quiet conditions, with three main objectives. First, provide detailed descriptions of the NAIRAS GCR transport and dosimetry methodologies. Second, present a climatology of effective dose and ambient dose equivalent rates at typical commercial airline altitudes representative of solar cycle maximum and solar cycle minimum conditions and spanning the full range of geomagnetic cutoff rigidities. Third, conduct an initial validation of the NAIRAS model by comparing predictions of ambient dose equivalent rates with tabulated reference measurement data and recent aircraft radiation measurements taken in 2008 during the minimum between solar cycle 23 and solar cycle 24. By applying the criterion of the International Commission on Radiation Units and Measurements (ICRU) on acceptable levels of aircraft radiation dose uncertainty for ambient dose equivalent greater than or equal to an annual dose of 1 mSv, the NAIRAS model is within 25% of the measured data, which fall within the ICRU acceptable uncertainty limit of 30%. The NAIRAS model predictions of ambient dose equivalent rate are generally within 50% of the measured data for any single-point comparison. The largest differences occur at low latitudes and high cutoffs, where the radiation dose level is low. Nevertheless, analysis suggests

  13. Experience in the development and practical use of working control levels for radiation safety

    International Nuclear Information System (INIS)

    Epishin, A.V.

    1981-01-01

    The experience of development and practical use of working control levels (WCL) of radiation safety in the Gorky region, is discussed. WCL are introduced by ''Radiation Safety Guides'' (RSG-76) and have great practical importance. Regional control levels of radiation safety are determined for certain types of operations implying radioactive hazard and differentiated according to the types of sources applied and types of operation. Dose rates, radioactive contamination of operating surfaces, skin, air and waste water are subject to normalization. Limits of individual radiation doses specified according to operation categories are included. 10 tables of regional WCL indices are developed [ru

  14. New strategies based on biomedical approaches for developing countermeasures against radiation and nuclear emergency

    International Nuclear Information System (INIS)

    Mishra, K. P.

    2009-01-01

    Biomedical and radiological research projects are essentially aimed to understanding, evaluation and modification of ionizing radiation induced effects on microorganisms, plants, animals and humans. It is widely recognized that control and management of radiation injury are central to safety assurances for peaceful applications of nuclear energy and radiation technology. Extensive radiobiological research in the past decades have allowed gaining the deeper insight of molecular mechanisms of radiation damage in vital cellular targets, namely, DNA, membrane, proteins and signaling cascades. The radiation induced damaging events in living cells are believed to be mediated by direct as well as indirect effects of radiation on the components of cells involving highly reactive free radicals which has provided basis for developing protocols for radioprotection and cancer radiotherapy. Cellular responses are subject to nature and dose/dose rates of radiation which are eventually reflected in the severity of health effects of population. Radiobiology research has a long-standing goal in understanding the risk, prevention, and treatment of damage to normal tissue after radiation exposure of healthy populations and also, in cancer treatment. However, much remains to be learned in terms of underlying molecular process and factors controlling the radiation injury. Developing high through put diagnostic tools for detection and bio markers for assessing radiation exposures are immediate challenges for policy planners, administrators, medical experts and safety officials in the management and control of mass exposures from nuclear radiation. Present world is faced with a rather new threat scenario from radiological and nuclear attack using radiation and radioisotope material by so called determined groups. To address the threat, new research efforts are required in developing safe and effective countermeasures against radiation emergency. It has become urgent to identify the

  15. Recent developments in photoelectron dynamics using synchrotron radiation

    International Nuclear Information System (INIS)

    Carlson, T.A.; Krause, M.O.; Taylor, J.W.; Keller, P.R.; Piancastelli, M.N.; Grimm, F.A.; Whitley, T.A.

    1982-01-01

    Through a collaborative effort of members of the Oak Ridge National Laboratory and Universities of Wisconsin and Tennessee, a comprehensive study of atoms and molecules using angle-resolved photoelectron spectroscopy and synchrotron radiation is underway at the Synchrotron Radiation Center, Stoughton, Wisconsin. Over 50 molecules and atoms have been investigated. These results, coupled with theory, aim at a better understanding of the dynamics of photoionization and of the wave functions that control these processes. In particular, attention is given to the following topics: metal atomic vapors, generalization of molecular orbital types, autoionization, shape resonances, core shell effects, satellite structure, and the Cooper minimum

  16. BioSentinel: Developing a Space Radiation Biosensor

    Science.gov (United States)

    Santa Maria, Sergio R.

    2015-01-01

    BioSentinel is an autonomous fully self-contained science mission that will conduct the first study of the biological response to space radiation outside low Earth orbit (LEO) in over 40 years. The 4-unit (4U) BioSentinel biosensor system, is housed within a 6-Unit (6U) spacecraft, and uses yeast cells in multiple independent microfluidic cards to detect and measure DNA damage that occurs in response to ambient space radiation. Cell growth and metabolic activity will be measured using a 3-color LED detection system and a metabolic indicator dye with a dedicated thermal control system per fluidic card.

  17. Radiation detectors for personnel monitoring - current developments and future trends

    International Nuclear Information System (INIS)

    Kannan, S.

    2003-01-01

    The radiation detectors for personnel monitoring range from the conventional passive dosimeters like the film badge and the TLD, to sophisticated active dosimeters for integrated gamma, beta and neutron dose measurement. With the availability of high accuracy active dosimeters, the process of personnel monitoring, acceptability among radiation workers, record keeping and dose control have become more simplified. However the high level of sophistication in the active dosimeter has its own inevitable price tag and the new breed of active dosimeters are prohibitively costly. The silver lining, in the otherwise dark cost scenario of these dosimeters is the potential for cost reduction at least in some of the dosimeters in the near future

  18. Exposure to cosmic radiation: a developing major problem in radiation protection

    International Nuclear Information System (INIS)

    Lowder, W.M.; Hajnal, F.

    1992-01-01

    'Full Text:' Cosmic radiation at ground altitudes is usually a relatively minor contributor to human radiation exposure, producing a global collective dose equivalent that is about 10 percent of the total from all natural sources. However, more than a million people living at high altitudes receive annual dose equivalents in excess of 5 mSv. In recent years, there has been increasing concern about the exposure of aircraft flight crews and passengers, for whom annual dose equivalents of up to several mSv have been estimated. Recent EML results indicate the presence of an important high-energy neutron component at jet aircraft altitudes, perhaps producing dose equivalents of the order of 0.1. mSv/h at high latitudes. Finally, space agencies have been long concerned with the potential exposures of astronauts, especially from the rare massive solar flare events. As more people venture into space, this source of human radiation exposure will become increasingly important. Available date on those aspects of cosmic radiation exposure will be reviewed, along with current and anticipated future research activities that may yield and improve assessment of the problem. The question of how such exposures might be controlled will be addressed, but not answered. (author)

  19. A desk evaluation review of project RAF/9/005 radiation protection development. Project desk evaluation

    International Nuclear Information System (INIS)

    1994-01-01

    The Agency has been assisting member nations through a number of national TC projects in radiation protection and related areas over the years. In addition, a regional project RAF/9/005 - Radiation Protection Development (which is under this review) was approved in 1988, with the aim of assessing existing radiation protection practices in the African Member States in relation to the Agency's new basic safety standards for radiation protection, and to advise Governments on improvements. The project was subsequently extended up to 1994 as an umbrella project to assist all African Member States in the development of appropriate radiation protection services; to co-ordinate the implementation of the relevant national TC projects; and to develop co-operation amongst groups of Member States on a regional and sub-regional basis. Particular emphasis was to be given to manpower development through workshops, seminars and training courses in radiation protection and safety. In parallel thereto, the Agency's Radiation Protection Advisory Teams (RAPATs) visited nineteen African Member States during the period 1986 through 1993, to review and assess their radiation protection activities, identify priorities, and design long-term radiation protection programmes. RAPAT findings and recommendations were considered in drawing up programmes for implementation under project RAF/9/005

  20. Advances in Physical and Biological Radiation Detectors. Proceedings of a Symposium on New Developments in Physical and Biological Radiation Detectors

    International Nuclear Information System (INIS)

    1971-01-01

    Radiation dosimetry is a fundamental part of all radiation protection work. The measurements are made with a variety of instruments, and health physicists, after professional interpretation of the data, can assess the levels of exposure which might be encountered in a given area or the individual doses received by workers, visitors and others at places where the possibility of radiation exposure exists. The types of radiation concerned here are photon radiations, ranging from soft X-rays to gamma rays, and particulate radiations such as β-rays, α-particles, protons, neutrons and fission fragments. The type of technique used depends not only on the type of radiation but also on such factors as whether the radiation is from a source internal or external to the body. Radiation dosimetry is not only used at nuclear facilities; it has diverse applications, for example in determining doses when radiation sources are employed for medical diagnostics and therapy, in safeguarding workers in any industry where isotopes are used, and in assessing the effect of both naturally occurring and man-made radiations on the general public and the environment. The advances of modern technology have increased the variety of sources; an example can be given from colour television, where the high potential necessary in certain colour cathode-ray tubes generates a non-negligible amount of X-rays. The Symposium on New Developments in Physical and Biological Radiation Detectors was one of a continuing series of meetings in which the International Atomic Energy Agency furthers the exchange of information on all aspects of personnel and area dosimetry. The Symposium was devoted in particular to a study of the dose meters themselves - their radiation-sensitive elements (both physical and biological),their instrumentation, and calibration and standardization. Several speakers suggested that the situation in the standardization and calibration of measuring equipment and sources was

  1. Anticipated development of radiation safety corresponding to utilization of nuclear technology in Vietnam

    International Nuclear Information System (INIS)

    Tran, Toan Ngoc; Le, Thiem Ngoc

    2010-01-01

    In the past, due to the limited application of radiation and radioisotope in the national economic branches, radiation safety was not paid much attention to in Vietnam. However, according to the Strategy for Peaceful Utilization of Atomic Energy up to 2020 approved by the Prime Minister on January 3, 2006 the application of radiation and radioisotopes as well as nuclear power in Vietnam is expected increasing strongly and widely, then radiation safety should be developed correspondingly. This paper presents the history of radiation protection, the current status and prospect of utilization of atomic energy and the anticipated development of the national radiation safety system to meet the demand of utilization of nuclear technology in Vietnam. (author)

  2. Preliminary results in the development of system for remote mapping of radiation

    International Nuclear Information System (INIS)

    Jesus, Miller F. de; Carvalho, Paulo Victor R. de; Farias, Marcos S.

    2013-01-01

    This paper presents a project that aims to use virtual instrumentation on mobile devices to carry out radiation monitoring in an environment using mobile robots. The idea is to use this development to reduce the need for exposed workers at nuclear facilities. The design is based on a mobile robot that is controlled by commands sent via network wireless. The robot is coupled to the body a radiation monitor that is designed to send the radiation in the environment data rate also through the wireless network. The system is completed by programs developed for controlling the robot and receiving the radiation rate measurements, enabling remote and mobile monitoring of radiation and automating the mapping of radiation in the environment

  3. Development of radiation techniques in the 80's

    International Nuclear Information System (INIS)

    Wiesner, L.

    1990-01-01

    The application of radiation for the purpose of sterilisation in the medical field and for the enhancement of material properties, particularly for polymer products, has been in operation for decades. Electron accelerators and gamma radiation devices are the radiation sources. The technology is clearly concentrated in Asia, especially Japan, (surface coatings and crosslinking for cable insulators). In industry, the process is commonly used in curing, drying, crosslinking, grafting and vulcanisation. Radiation technology is an increasingly important factor in the low-cost production of top quality advanced products for sophisticated areas of manufacturing. It has already been introduced in high-tech applications in the manufacture of megabit chips, which are undoubtedly one of the main reasons for Japan's leading position in that field. The Japanese industry has already set out along the road towards the manufacture of ultra-highly integrated circuits, which open up completely new opportunities in the field of data and information processing. This has been made possible by Japanese mastery of the technique of building and operating electron accelerators to provide synchrotron beams. (orig./DG) [de

  4. Developing diagnostic guidelines for the acute radiation syndrome

    International Nuclear Information System (INIS)

    Densow, D.; Fliedner, T.M.; Kindler, H.

    1996-01-01

    Diagnostic guidelines seem to be promising for improving medical care. One aspect of a diagnostic guideline for the acute radiation syndrome has been tested against an extensive case history database. Subsequently, the guideline has been optimized for a small set of case histories. The improved performance has been proven by a test against the rest of the case history database

  5. Radiation protection and the development of nuclear power

    International Nuclear Information System (INIS)

    Bovard, P.; Fitoussi, L.

    1975-01-01

    Lights are given on the nature and origins of the radioactivity that could be added to the environment on account of human activities in the electronuclear field and information is given on the investigations undertaken in the field of radiation protection to follow the fate of such radioactivity and assess its possible contribution to populations' exposures [fr

  6. Development of radiation safety monitoring system at gamma greenhouse gamma facility

    International Nuclear Information System (INIS)

    Hairul Nizam Idris; Azimawati Ahmad, Ahmad Zaki Hussain; Ahmad Fairuz Mohd Nasir

    2009-01-01

    This paper is discussing about installation of radiation safety monitoring system at Gamma Greenhouse Gamma facility, Agrotechnology and Bioscience Division (BAB). This facility actually is an outdoor type irradiation facility, which first in Nuclear Malaysia and the only one in Malaysia. Source Cs-137 (801 Curie) was use as radiation source and it located at the centre of 30 metres diameter size of open irradiation area. The radiation measurement and monitoring system to be equipped in this facility were required the proper equipment and devices, specially purpose for application at outside of building. Research review, literature study and discussion with the equipment manufacturers was being carried out, in effort to identify the best system should be developed. Factors such as tropical climate, environment surrounding and security were considered during selecting the proper system. Since this facility involving with panoramic radiation type, several critical and strategic locations have been fixed with radiation detectors, up to the distance at 200 meter from the radiation source. Apart from that, this developed system also was built for capable to provide the online real-time reading (using internet). In general, it can be summarized that the radiation safety monitoring system for outdoor type irradiation facility was found much different and complex compared to the system for indoor type facility. Keyword: radiation monitoring, radiation safety, Gamma Greenhouse, outdoor irradiation facility, panoramic radiation. (Author)

  7. Radiations

    International Nuclear Information System (INIS)

    Pujol Mora, J.

    1999-01-01

    The exposition to ionizing radiations is a constant fact in the life of the human being and its utilization as diagnostic and therapeutic method is generalized. However, it is notorious how as years go on, the fear to the ionizing radiation seems to persist too, and this fact is not limited to the common individual, but to the technical personnel and professional personnel that labors with them same. (S. Grainger) [es

  8. Radiation

    International Nuclear Information System (INIS)

    Davidson, J.H.

    1986-01-01

    The basic facts about radiation are explained, along with some simple and natural ways of combating its ill-effects, based on ancient healing wisdom as well as the latest biochemical and technological research. Details are also given of the diet that saved thousands of lives in Nagasaki after the Atomic bomb attack. Special comment is made on the use of radiation for food processing. (U.K.)

  9. NAIRAS aircraft radiation model development, dose climatology, and initial validation.

    Science.gov (United States)

    Mertens, Christopher J; Meier, Matthias M; Brown, Steven; Norman, Ryan B; Xu, Xiaojing

    2013-10-01

    [1] The Nowcast of Atmospheric Ionizing Radiation for Aviation Safety (NAIRAS) is a real-time, global, physics-based model used to assess radiation exposure to commercial aircrews and passengers. The model is a free-running physics-based model in the sense that there are no adjustment factors applied to nudge the model into agreement with measurements. The model predicts dosimetric quantities in the atmosphere from both galactic cosmic rays (GCR) and solar energetic particles, including the response of the geomagnetic field to interplanetary dynamical processes and its subsequent influence on atmospheric dose. The focus of this paper is on atmospheric GCR exposure during geomagnetically quiet conditions, with three main objectives. First, provide detailed descriptions of the NAIRAS GCR transport and dosimetry methodologies. Second, present a climatology of effective dose and ambient dose equivalent rates at typical commercial airline altitudes representative of solar cycle maximum and solar cycle minimum conditions and spanning the full range of geomagnetic cutoff rigidities. Third, conduct an initial validation of the NAIRAS model by comparing predictions of ambient dose equivalent rates with tabulated reference measurement data and recent aircraft radiation measurements taken in 2008 during the minimum between solar cycle 23 and solar cycle 24. By applying the criterion of the International Commission on Radiation Units and Measurements (ICRU) on acceptable levels of aircraft radiation dose uncertainty for ambient dose equivalent greater than or equal to an annual dose of 1 mSv, the NAIRAS model is within 25% of the measured data, which fall within the ICRU acceptable uncertainty limit of 30%. The NAIRAS model predictions of ambient dose equivalent rate are generally within 50% of the measured data for any single-point comparison. The largest differences occur at low latitudes and high cutoffs, where the radiation dose level is low. Nevertheless, analysis

  10. A case of post-radiation constrictive pericarditis developing 12 years after radiation therapy

    Energy Technology Data Exchange (ETDEWEB)

    Sakuraba, Motoki; Tanaka, Jun-ichi; Ikeda, Shingo; Kigawa, Ikutaro; Fukuda, Sachito; Wanibuchi, Yasuhiko [Mitsui Memorial Hospital, Tokyo (Japan)

    1997-11-01

    A 70-year-old woman underwent radical mastectomy for carcinoma of the left breast in 1982. Postoperative radiation therapy was given in a total dose of 50 Gy for parasternal and left subclavian nodes. Symptoms of heart failure such as exertional dyspnea, facial edema, and hepatomegaly manifested in 1992. Cardiac catheterization revealed marked elevation of mean right atrial pressure and right ventricular end-diastolic pressure. The pressure wave form of the right ventricle showed the so called ``dip and plateau`` feature. Pericardiectomy without using extracorporeal circulation was performed in 1994. Operative findings and pathological study results were compatible with radiation-induced constrictive pericarditis. She rapidly recovered from heart failure after this operation, and has done very well to date. (author)

  11. Radiation

    International Nuclear Information System (INIS)

    Winther, J.F.; Ulbak, K.; Dreyer, L.; Pukkala, E.; Oesterlind, A.

    1997-01-01

    Exposure to solar and ionizing radiation increases the risk for cancer in humans. Some 5% of solar radiation is within the ultraviolet spectrum and may cause both malignant melanoma and non-melanocytic skin cancer; the latter is regarded as a benign disease and is accordingly not included in our estimation of avoidable cancers. Under the assumption that the rate of occurrence of malignant melanoma of the buttocks of both men and women and of the scalp of women would apply to all parts of the body in people completely unexposed to solar radiation, it was estimated that approximately 95% of all malignant melanomas arising in the Nordic populations around the year 2000 will be due to exposure to natural ultraviolet radiation, equivalent to an annual number of about 4700 cases, with 2100 in men and 2600 in women, or some 4% of all cancers notified. Exposure to ionizing radiation in the Nordic countries occurs at an average effective dose per capita per year of about 3 mSv (Iceland, 1.1 mSv) from natural sources, and about 1 mSv from man-made sources. While the natural sources are primarily radon in indoor air, natural radionuclides in food, cosmic radiation and gamma radiation from soil and building materials, the man-made sources are dominated by the diagnostic and therapeutic use of ionizing radiation. On the basis of measured levels of radon in Nordic dwellings and associated risk estimates for lung cancer derived from well-conducted epidemiological studies, we estimated that about 180 cases of lung cancer (1% of all lung cancer cases) per year could be avoided in the Nordic countries around the year 2000 if indoor exposure to radon were eliminated, and that an additional 720 cases (6%) could be avoided annually if either radon or tobacco smoking were eliminated. Similarly, it was estimated that the exposure of the Nordic populations to natural sources of ionizing radiation other than radon and to medical sources will each give rise to an annual total of 2120

  12. Study on development of education model and its evaluation system for radiation safety

    CERN Document Server

    Seo, K W; Nam, Y M

    2002-01-01

    As one of the detailed action strategy of multi object preparedness for strengthening of radiation safety management by MOST, this project was performed, in order to promote the safety culture for user and radiation worker through effective education program. For the prevention of radiological accident and effective implementation of radiation safety education and training, this project has been carried out the development of education model and its evaluation system on radiation safety. In the development of new education model, education course was classified; new and old radiation worker, temporary worker, lecturer and manager. The education model includes the contents of expanding the education opportunity and workplace training. In the development of evaluation system, the recognition criteria for commission-education institute and inside-education institute which should establish by law were suggested for evaluation program. The recognition criteria contains classification, student, method, facilities, ...

  13. Development of radiation shielding standards in the American Nuclear Society

    International Nuclear Information System (INIS)

    Trubey, D.K.

    1975-11-01

    The American Nuclear Society (ANS) is a standards-writing organization-member of the American National Standards Institute (ANSI). The ANS Standards Committee has a subcommittee denoted ANS-6, Shielding, whose charge is to establish standards in connection with radiation protection and shielding, to provide shielding information to other standards writing groups, and to prepare recommended sets of shielding data and test problems. This paper is a progress report of this subcommittee

  14. Radiation technology for the development of improved crop varieties

    International Nuclear Information System (INIS)

    D'Souza, Stanislaus F.

    2009-01-01

    One of the peaceful applications of atomic energy is in the field of agriculture. It finds application in crop improvement, crop nutrition, crop protection and food preservation. Genetic improvement of crop plants is a continuous endeavor. Success of a crop improvement programme depends on the availability of large genetic variability, which a plant breeder can combine to generate new varieties. In nature, occurrence of natural variability in the form of spontaneous mutations is extremely low (roughly 10 -6 ), which can be enhanced to several fold (approximately 10 -3 ) by using ionizing radiations or chemical mutagens. Radiation induced genetic variability in crop plants is a valuable resource from which plant breeder can select and combine different desired characteristics to produce better crop varieties. Crop improvement programmes at Bhabha Atomic Research Centre (BARC) envisage radiation based induced mutagenesis along with recombination breeding in country's important cereals (rice and wheat), oilseeds (groundnut, mustard, soybean and sunflower), grain legumes (blackgram, mungbean, pigeonpea and cowpea), banana and sugarcane. The desirable traits which have been bred through induced mutations include higher yield, grain quality, early maturity, disease and pest resistance, improved plant type and abiotic stress resistance

  15. Review of the development of diamond radiation sensors

    Energy Technology Data Exchange (ETDEWEB)

    Adam, W.; Bauer, C.; Berdermann, E.; Bergonzo, P.; Bogani, F.; Borchi, E.; Brambilla, A.; Bruzzi, M.; Colledani, C.; Conway, J.; Dabrowski, W.; Delpierre, P.; Deneuville, A.; Dulinski, W.; Eijk, B. van; Fallou, A.; Fizzotti, F.; Foulon, F.; Friedl, M.; Gan, K.K.; Gheeraert, E.; Grigoriev, E.; Hallewell, G.; Hall-Wilton, R.; Han, S.; Hartjes, F.; Hrubec, J. E-mail: josel.hrubec@cern.ch; Husson, D.; Kagan, H.; Kania, D.; Kaplon, J.; Karl, C.; Kass, R.; Knoepfle, K.T.; Krammer, M.; Logiudice, A.; Lu, R.; Manfredi, P.F.; Manfredotti, C.; Marshall, R.D.; Meier, D.; Mishina, M.; Oh, A.; Pan, L.S.; Palmieri, V.G.; Pernicka, M.; Peitz, A.; Pirollo, S.; Polesello, P.; Pretzl, K.; Re, V.; Riester, J.L.; Roe, S.; Roff, D.; Rudge, A.; Schnetzer, S.; Sciortino, S.; Speziali, V.; Stelzer, H.; Stone, R.; Tapper, R.J.; Tesarek, R.; Thomson, G.B.; Trawick, M.; Trischuk, W.; Vittone, E.; Walsh, A.M.; Wedenig, R.; Weilhammer, P.; Ziock, H.; Zoeller, M

    1999-09-11

    Diamond radiation sensors produced by chemical vapour deposition are studied for the application as tracking detectors in high luminosity experiments. Sensors with a charge collection distance up to 250 {mu}m have been manufactured. Their radiation hardness has been studied with pions, proton and neutrons up to fluences of 1.9x10{sup 15} {pi} cm{sup -2}, 5x10{sup 15} p cm{sup -2} and 1.35x10{sup 15} n cm{sup -2}, respectively. Diamond micro-strip detectors with 50 {mu}m pitch have been exposed in a high-energy test beam in order to investigate their charge collection properties. The measured spatial resolution using a centre-of-gravity position finding algorithm corresponds to the digital resolution for this strip pitch. First results from a strip tracker with a 2x4 cm{sup 2} surface area are reported as well as the performance of a diamond tracker read out by radiation-hard electronics with 25 ns shaping time. Diamond pixel sensors have been prepared to match the geometries of the recently available read-out chip prototypes for ATLAS and CMS. Beam test results are shown from a diamond detector bump-bonded to an ATLAS prototype read-out. They demonstrate a 98% bump-bonding efficiency and a digital resolution in both dimensions. (author)

  16. Review of the development of diamond radiation sensors

    International Nuclear Information System (INIS)

    Adam, W.; Bauer, C.; Berdermann, E.; Bergonzo, P.; Bogani, F.; Borchi, E.; Brambilla, A.; Bruzzi, M.; Colledani, C.; Conway, J.; Dabrowski, W.; Delpierre, P.; Deneuville, A.; Dulinski, W.; Eijk, B. van; Fallou, A.; Fizzotti, F.; Foulon, F.; Friedl, M.; Gan, K.K.; Gheeraert, E.; Grigoriev, E.; Hallewell, G.; Hall-Wilton, R.; Han, S.; Hartjes, F.; Hrubec, J.; Husson, D.; Kagan, H.; Kania, D.; Kaplon, J.; Karl, C.; Kass, R.; Knoepfle, K.T.; Krammer, M.; Logiudice, A.; Lu, R.; Manfredi, P.F.; Manfredotti, C.; Marshall, R.D.; Meier, D.; Mishina, M.; Oh, A.; Pan, L.S.; Palmieri, V.G.; Pernicka, M.; Peitz, A.; Pirollo, S.; Polesello, P.; Pretzl, K.; Re, V.; Riester, J.L.; Roe, S.; Roff, D.; Rudge, A.; Schnetzer, S.; Sciortino, S.; Speziali, V.; Stelzer, H.; Stone, R.; Tapper, R.J.; Tesarek, R.; Thomson, G.B.; Trawick, M.; Trischuk, W.; Vittone, E.; Walsh, A.M.; Wedenig, R.; Weilhammer, P.; Ziock, H.; Zoeller, M.

    1999-01-01

    Diamond radiation sensors produced by chemical vapour deposition are studied for the application as tracking detectors in high luminosity experiments. Sensors with a charge collection distance up to 250 μm have been manufactured. Their radiation hardness has been studied with pions, proton and neutrons up to fluences of 1.9x10 15 π cm -2 , 5x10 15 p cm -2 and 1.35x10 15 n cm -2 , respectively. Diamond micro-strip detectors with 50 μm pitch have been exposed in a high-energy test beam in order to investigate their charge collection properties. The measured spatial resolution using a centre-of-gravity position finding algorithm corresponds to the digital resolution for this strip pitch. First results from a strip tracker with a 2x4 cm 2 surface area are reported as well as the performance of a diamond tracker read out by radiation-hard electronics with 25 ns shaping time. Diamond pixel sensors have been prepared to match the geometries of the recently available read-out chip prototypes for ATLAS and CMS. Beam test results are shown from a diamond detector bump-bonded to an ATLAS prototype read-out. They demonstrate a 98% bump-bonding efficiency and a digital resolution in both dimensions. (author)

  17. Review of the development of diamond radiation sensors

    Science.gov (United States)

    Adam, W.; Bauer, C.; Berdermann, E.; Bergonzo, P.; Bogani, F.; Borchi, E.; Brambilla, A.; Bruzzi, M.; Colledani, C.; Conway, J.; Dabrowski, W.; Delpierre, P.; Deneuville, A.; Dulinski, W.; van Eijk, B.; Fallou, A.; Fizzotti, F.; Foulon, F.; Friedl, M.; Gan, K. K.; Gheeraert, E.; Grigoriev, E.; Hallewell, G.; Hall-Wilton, R.; Han, S.; Hartjes, F.; Hrubec, J.; Husson, D.; Kagan, H.; Kania, D.; Kaplon, J.; Karl, C.; Kass, R.; Knöpfle, K. T.; Krammer, M.; Logiudice, A.; Lu, R.; Manfredi, P. F.; Manfredotti, C.; Marshall, R. D.; Meier, D.; Mishina, M.; Oh, A.; Pan, L. S.; Palmieri, V. G.; Pernicka, M.; Peitz, A.; Pirollo, S.; Polesello, P.; Pretzl, K.; Re, V.; Riester, J. L.; Roe, S.; Roff, D.; Rudge, A.; Schnetzer, S.; Sciortino, S.; Speziali, V.; Stelzer, H.; Stone, R.; Tapper, R. J.; Tesarek, R.; Thomson, G. B.; Trawick, M.; Trischuk, W.; Vittone, E.; Walsh, A. M.; Wedenig, R.; Weilhammer, P.; Ziock, H.; Zoeller, M.; RD42 Collaboration

    1999-09-01

    Diamond radiation sensors produced by chemical vapour deposition are studied for the application as tracking detectors in high luminosity experiments. Sensors with a charge collection distance up to 250 μm have been manufactured. Their radiation hardness has been studied with pions, proton and neutrons up to fluences of 1.9×10 15 π cm -2, 5×10 15 p cm -2 and 1.35×10 15 n cm -2, respectively. Diamond micro-strip detectors with 50 μm pitch have been exposed in a high-energy test beam in order to investigate their charge collection properties. The measured spatial resolution using a centre-of-gravity position finding algorithm corresponds to the digital resolution for this strip pitch. First results from a strip tracker with a 2×4 cm 2 surface area are reported as well as the performance of a diamond tracker read out by radiation-hard electronics with 25 ns shaping time. Diamond pixel sensors have been prepared to match the geometries of the recently available read-out chip prototypes for ATLAS and CMS. Beam test results are shown from a diamond detector bump-bonded to an ATLAS prototype read-out. They demonstrate a 98% bump-bonding efficiency and a digital resolution in both dimensions.

  18. Review of the development of diamond radiation sensors

    CERN Document Server

    Adam, W; Berdermann, E; Bergonzo, P; Bogani, F; Borchi, E; Brambilla, A; Bruzzi, Mara; Colledani, C; Conway, J; Dabrowski, W; Delpierre, P A; Deneuville, A; Dulinski, W; van Eijk, B; Fallou, A; Fizzotti, F; Foulon, F; Friedl, M; Gan, K K; Gheeraert, E; Grigoriev, E; Hallewell, G D; Hall-Wilton, R; Han, S; Hartjes, F G; Hrubec, Josef; Husson, D; Kagan, H; Kania, D R; Kaplon, J; Karl, C; Kass, R; Knöpfle, K T; Krammer, Manfred; Lo Giudice, A; Lü, R; Manfredi, P F; Manfredotti, C; Marshall, R D; Meier, D; Mishina, M; Oh, A; Pan, L S; Palmieri, V G; Pernicka, Manfred; Peitz, A; Pirollo, S; Polesello, P; Pretzl, Klaus P; Re, V; Riester, J L; Roe, S; Roff, D G; Rudge, A; Schnetzer, S R; Sciortino, S; Speziali, V; Stelzer, H; Stone, R; Tapper, R J; Tesarek, R J; Thomson, G B; Trawick, M L; Trischuk, W; Vittone, E; Walsh, A M; Wedenig, R; Weilhammer, Peter; Ziock, H J; Zöller, M

    1999-01-01

    Diamond radiation sensors produced by chemical vapour deposition are studied for the application as tracking detectors in high luminosity experiments. Sensors with a charge collection distance up to 250 mu m have been manufactured. Their radiation hardness has been studied with pions, proton and neutrons up to fluences of 1.9*10/sup 15/ pi cm/sup -2/, 5*10/sup 19/ p cm/sup -2/ and 1.35*10/sup 15/ n cm/sup -2 /, respectively. Diamond micro-strip detectors with 50 mu m pitch have been exposed in a high-energy test beam in order to investigate their charge collection properties. The measured spatial resolution using a centre-of-gravity position finding algorithm corresponds to the digital resolution for this strip pitch. First results from a strip tracker with a 2*4 cm/sup 2/ surface area are reported as well as the performance of a diamond tracker read out by radiation-hard electronics with 25 ns shaping time. Diamond pixel sensors have been prepared to match the geometries of the recently available read-out ch...

  19. Radiation cross-linked polymers: Recent developments and new applications

    International Nuclear Information System (INIS)

    Rouif, Sophie

    2005-01-01

    The purpose of the present paper is to review the innovative and recent applications of radiation cross-linking of polymers that reinforces their dimensional stability in chemically aggressive and high temperature conditions. Radiation cross-linking can be applied to a great number of plastics: thermoplastics, elastomers and thermoplastic elastomers (TPE). Some of them can cross-link on their own, some others need to be formulated with a cross-linking agent (promoter) or to be modified during their polymerization. Some results of chemical and thermomechanical characterizations of radiation cross-linked plastics based on engineering polymers will be described, and their advantages will be emphasized in relation with their applications in various sectors: pipes and cables, packaging, automotive, electrical engineering and electronics, including connectors, surface mounted devices, integrated circuits, 3D-MID technology, etc. The paper will conclude with a short review of the industrial irradiation facilities (EB facilities and gamma plants) adapted to the treatment of such various products

  20. Development and deployment of the Collimated Directional Radiation Detection System

    Science.gov (United States)

    Guckes, Amber L.; Barzilov, Alexander

    2017-09-01

    The Collimated Directional Radiation Detection System (CDRDS) is capable of imaging radioactive sources in two dimensions (as a directional detector). The detection medium of the CDRDS is a single Cs2LiYCl6:Ce3+ scintillator cell enriched in 7Li (CLYC-7). The CLYC-7 is surrounded by a heterogeneous high-density polyethylene (HDPE) and lead (Pb) collimator. These materials make-up a coded aperture inlaid in the collimator. The collimator is rotated 360° by a stepper motor which enables time-encoded imaging of a radioactive source. The CDRDS is capable of spectroscopy and pulse shape discrimination (PSD) of photons and fast neutrons. The measurements of a radioactive source are carried out in discrete time steps that correlate to the angular rotation of the collimator. The measurement results are processed using a maximum likelihood expectation (MLEM) algorithm to create an image of the measured radiation. This collimator design allows for the directional detection of photons and fast neutrons simultaneously by utilizing only one CLYC-7 scintillator. Directional detection of thermal neutrons can also be performed by utilizing another suitable scintillator. Moreover, the CDRDS is portable, robust, and user friendly. This unit is capable of utilizing wireless data transfer for possible radiation mapping and network-centric applications. The CDRDS was tested by performing laboratory measurements with various gamma-ray and neutron sources.

  1. Development and implementation of a new radiation exposure record system

    International Nuclear Information System (INIS)

    Lyon, M.; Berndt, V.L.; Trevino, G.W.; Oakley, B.M.

    1993-01-01

    The Hanford Radiological Records Program (HRRP) maintains all available radiation exposure records created since the 1940s for employees of and visitors to the Hanford Site. The program provides exposure status reports to the US Department of Energy Richland Operations Office (DOE-RL) and the Hanford contractors, annual exposure reports to individual employees and visitors, and exposure reports to terminated employees. Program staff respond to offsite requests for exposure data on former employees and supply data and reports for epidemiological and research projects as well as for annual reports required by DOE Orders. Historical files, documenting radiation protection and dosimetry policies, procedures, and practices, and radiological incidents, are also maintained under this program. The program is operated by Pacific Northwest Laboratory for DOE-RL. This paper describes how the record-keeping requirements supported by the HRRP's computerized radiation exposure database were analyzed so that the system could be redeveloped and implemented to (1) accommodate a change in mainframe computer units, and (2) to enhance its automated record-keeping, retrieval, and reporting capabilities in support of the HRRP

  2. Development of model for assessment of radiation discharge to the environment

    International Nuclear Information System (INIS)

    Shang Zhaorong; Wu Hao; Liu Hua

    2003-01-01

    International Atomic Energy Agency (IAEA) establish basic and detailed requirements for protection against the risks associated with exposure to radiation and for the safety of radiation sources that may deliver such exposure, in which, particularly emphasize to 'make an assessment of the nature, magnitude and likelihood of the exposure attributed to the source'. It is clear that the assessment of the consequential radiation exposure arising from any releases of radioactive materials to the environment will have to rely on some form of model. This paper summary recent progress in radiation protection policy and radioecology research and primary concludes the basis requirements in assessment model development

  3. Development of the video streaming system for the radiation safety training

    International Nuclear Information System (INIS)

    Uemura, Jitsuya

    2005-01-01

    Radiation workers have to receive the radiation safety training every year. It is very hard for them to receive the training within a limited chance of training. Then, we developed the new training system using the video streaming technique and opened the web page for the training on our homepage. Every worker is available to receive the video lecture at any time and at any place by using his PC via internet. After watching the video, the worker should receive the completion examination. It he can pass the examination, he was registered as a radiation worker by the database system for radiation control. (author)

  4. Development of radiation oncology learning system combined with multi-institutional radiotherapy database (ROGAD)

    International Nuclear Information System (INIS)

    Takemura, Akihiro; Iinuma, Masahiro; Kou, Hiroko; Harauchi, Hajime; Inamura, Kiyonari

    1999-01-01

    We have constructed and are operating a multi-institutional radiotherapy database ROGAD (Radiation Oncology Greater Area Database) since 1992. One of it's purpose is 'to optimize individual radiotherapy plans'. We developed Radiation oncology learning system combined with ROGAD' which conforms to that purpose. Several medical doctors evaluated our system. According to those evaluations, we are now confident that our system is able to contribute to improvement of radiotherapy results. Our final target is to generate a good cyclic relationship among three components: radiotherapy results according to ''Radiation oncology learning system combined with ROGAD.'; The growth of ROGAD; and radiation oncology learning system. (author)

  5. The application and development on radiation monitoring microcomputer management system in design of a certain project

    International Nuclear Information System (INIS)

    Zhang Hongyou

    1993-01-01

    A scheme of a radiation monitoring system with a RMMMS (Radiation Monitoring Microcomputer Management System) has been designed for the first time in the radiation protection design of a certain nuclear projection undertaken by the BINE (Beijing Institute of Nuclear Engineering). Meanwhile, we accepted the research task of the RMMMS that can manage 40 monitoring channel. The key factors of radiation monitors, microcomputer, information management and systematic design method are considered in the development of the RMMMS. This paper presents briefly the scheme and functions of the RMMMS

  6. Overview Of Research And Development On Radiation Technology In Vietnam During The Period Of 2005 - 2007

    International Nuclear Information System (INIS)

    Tran Khac An; Nguyen Quoc Hien

    2008-01-01

    Radiation technology is increasingly applied in may countries including Vietnam. This paper reviews R and D works, manpower, irradiation facilities and service irradiation in the period of 2005-2007. The orientation of development for radiation technology in the country and international co-operation programs are also briefly discussed in this paper as well. (author)

  7. Best estimate radiation heat transfer model developed for TRAC-BD1

    International Nuclear Information System (INIS)

    Spore, J.W.; Giles, M.M.; Shumway, R.W.

    1981-01-01

    A best estimate radiation heat transfer model for analysis of BWR fuel bundles has been developed and compared with 8 x 8 fuel bundle data. The model includes surface-to-surface and surface-to-two-phase fluid radiation heat transfer. A simple method of correcting for anisotropic reflection effects has been included in the model

  8. Development of a training programme for radiation protection officers in industrial irradiators

    International Nuclear Information System (INIS)

    Mumuni, I. I.

    2014-01-01

    The International Basic Safety Standards (BSS) for Protection against Ionizing Radiation and for the Safety of Radiation Sources establish the basic requirements for protection against the risks associated with exposure to ionizing radiation and for the safety of radiation sources that may deliver such exposure. One important aspect of the Safety Standard is education and training of all personnel involved in the activities of radiation and radioactive sources. According to the BSS a Radiation Protection Officer is an individual technically competent in radiation protection matters relevant for a given type of practice who is designated by the registrant or licensee to oversee the application of the requirements of the standards. By this assigned role, radiation protection officers for industrial irradiators should be adequately trained since these facilities involve very high dose rates during irradiation, such that a person accidentally exposed can receive a lethal dose within minutes or seconds and fatalities can occur. This training among others things will enable the radiation protection officers to understand practical application of the IAEA Safety Standard to industrial irradiator facilities, understand the requirements for safety assessments and emergency plans, be able to develop a radiation protection programme for irradiators, be familiar with the different types of industrial irradiators and their applications and understand the safety philosophy and design requirements for industrial irradiators. (author)

  9. Radiation-Induced Graft Polymerization: Gamma Radiation and Electron Beam Technology for Materials Development

    International Nuclear Information System (INIS)

    Madrid, Jordan F.; Cabalar, Patrick Jay; Lopez, Girlie Eunice; Abad, Lucille V.

    2015-01-01

    The formation of functional hybrid materials by attaching polymer chains with advantageous tailored properties to the surface of a base polymer with desirable bulk character is an attractive application of graft copolymerization. Radiation-induced graft polymerization (RIGP) has been a popular approach for surface modification of polymers because of its merits over conventional chemical processes. RIGP, which proceeds primarily via free radical polymerization process, has the advantages such as simplicity, low cost, control over process and adjustment of the materials composition and structure. RIGP can be performed using either electron beam or gamma radiation and it can be applied to both synthetic and natural polymers. These merits make RIGP a popular research topic worldwide. Moreover, the materials synthesized and produced via RIGP has found applications, and were proposed to produce continuous impact, in the fields of medicine, agriculture, pollution remediation, rare earth and valuable metals recovery, fuel cell membrane synthesis and catalysis to name a few. From 2012 our group has performed electron beam and gamma radiation-induced graft polymerization of various monomers onto polymers of natural and synthetic origins (e.g. monomers - glycidyl methacrylate, styrene, acrylonitrile, N,N-dimethylaminoethyl methacrylate; base polymers – polyethylene/polypropylene nonwoven fabric, polypropylene nonwoven fabric pineapple fibers, cellulose nonwoven fabric microcrystalline cellulose). We tested these grafted materials for heavy metals (Pb, Ni, Cu) and organic molecule removal from aqueous solutions and E. coli activity (using reversible addition fragmentation chain transfer RAFT mediated grafting). The results clearly showed the success of materials modified via FIGP in these applications. Currently, we are studying the applications of grafted materials on treatment of waste waters from tanning industry, value addition to abaca nonwoven fabrics cell sheet

  10. Development of new radiation resistant, fire-retardant cables. [Gamma radiation

    Energy Technology Data Exchange (ETDEWEB)

    Hagiwara, Ko; Morita, Yosuke; Udagawa, Takashi (Japan Atomic Energy Research Inst., Takasaki, Gunma. Takasaki Radiation Chemistry Research Establishment); Fujimura, Shun-ichi; Oda, Eisuke

    1982-12-01

    For the cables for nuclear facilities, radiation resistance and fire-retardation are severely required. The authors took note of the fact that even in the existing cables for nuclear power plants, their mechanical properties are greatly degraded by the exposure to large dose (for example, 200 Mrad in PWR testing conditions), and attempted the improvement. They employed a new additive, bromated acenaphthylene condensate (con-BACN), which effectively gives radiation resistance and also is a good flame retarder, to be compounded to an insulation material, and examined the characteristics. In this paper, the features of con-BACN and the investigation of fire-retardant EPDM composition are described. As an initial composition, a small amount of zinc white, sulphur, stearic acid, noclac 224 (Ouchi-Shinko Chemicals, Co.), and antimony trioxide, 100 parts of tale and 45 parts of con-BACN were added to 100 parts of EPDM (propylene content 34 %, Japan Synthetic Rubber Co.). As the antiaging agent, it was decided to use phenol series No. 3 as a result of test. The fire-retardant EP rubber-composed cable was produced for trial, its insulation being fabricated, using a Furukawa's pressurized salt bath continuous vulcanizer. The tests of ..gamma..-irradiation, simulated LOCA and combustion were carried out, and the test results are reported. It was indicated that the cable resisted against high dose several times as much as 200 Mrad, and was suitable for the applications, in which the mechanical properties such as bending are required to be maintained after radiation exposure. It was also found that con-BACN was safe, and its properties of decomposition, concentration and acute toxicity were all very low.

  11. Development of Nuclear Energy and Radiation Textbooks for Elementary School Students

    International Nuclear Information System (INIS)

    Han, E.; Choi, Y.; Yang, J.; Lee, S.

    2015-01-01

    The textbooks for elementary school students were developed to help future generations make value judgments based on appropriate information about nuclear energy and radiation. The themes and educational contents of the 13 lessons, to be delivered in one semester at elementary school level, were selected by the educational requirements of students, science teachers, and experts. The “Radiation and Life” textbook for elementary school students consists of the following chapters: – Chapter 1. What is nuclear energy and radiation?, – Chapter 2. Who discovered the nuclear energy and radiation?, – Chapter 3. Why is nuclear energy and radiation important?, – Chapter 4. Is nuclear energy and radiation dangerous?, – Chapter 5. Let’s learn about what to do when an accident occurs, – Chapter 6. How are nuclear energy and radiation used?, – Chapter 7. What is nuclear power generation?, – Chapter 8. Why is radiation used for food?, – Chapter 9. What is medical radiation?, – Chapter 10. What kind of irradiated products are in our daily lives?, – Chapter 11. What jobs are related to nuclear energy and radiation?, – Chapter 12. What are energies of future?, – Chapter 13. Concept of Talk-talk (a study review game). The general trend in recent educational curriculum development suppresses national education course organizations and authorities and expands the autonomy and authority of regions and schools. The derived textbook contents are expected to be helpful as first textbooks for the autonomous selection of education about nuclear energy and radiation for use in creative experiences developed at the school level. (author)

  12. Development of new radiation resistant, fire-retardant cables

    International Nuclear Information System (INIS)

    Hagiwara, Ko; Morita, Yosuke; Udagawa, Takashi; Fujimura, Shun-ichi; Oda, Eisuke.

    1982-01-01

    For the cables for nuclear facilities, radiation resistance and fire-retardation are severely required. The authors took note of the fact that even in the existing cables for nuclear power plants, their mechanical properties are greatly degraded by the exposure to large dose (for example, 200 Mrad in PWR testing conditions), and attempted the improvement. They employed a new additive, bromated acenaphthylene condensate (con-BACN), which effectively gives radiation resistance and also is a good flame retarder, to be compounded to an insulation material, and examined the characteristics. In this paper, the features of con-BACN and the investigation of fire-retardant EPDM composition are described. As an initial composition, a small amount of zinc white, sulphur, stearic acid, noclac 224 (Ouchi-Shinko Chemicals, Co.), and antimony trioxide, 100 parts of tale and 45 parts of con-BACN were added to 100 parts of EPDM (propylene content 34 %, Japan Synthetic Rubber Co.). As the antiaging agent, it was decided to use phenol series No. 3 as a result of test. The fire-retardant EP rubber-composed cable was produced for trial, its insulation being fabricated, using a Furukawa's pressurized salt bath continuous vulcanizer. The tests of γ-irradiation, simulated LOCA and combustion were carried out, and the test results are reported. It was indicated that the cable resisted against high dose several times as much as 200 Mrad, and was suitable for the applications, in which the mechanical properties such as bending are required to be maintained after radiation exposure. It was also found that con-BACN was safe, and its properties of decomposition, concentration and acute toxicity were all very low. (Wakatsuki, Y.)

  13. New developments on transition radiation detectors using superconducting granules

    International Nuclear Information System (INIS)

    Yuan, L.C.L.

    1977-01-01

    By raising slightly either the temperature or the magnetic field to above that of the critical temperature or the critical magnetic field, the type I superconducting granules would still remain in the superconducting state which becomes a metastable state and is called the superheated superconducting state. If a relativistic charged particle incident on such a granule which is located in a colloidal suspension has imported to it an energy that is above the threshold energy (for state flipping) of the granule then it would flip to the normal state. The threshold energy of a granule is a function of the square of its radius, whereas the energy loss of a charged particle due to ionization is linearly proportional to the radius. The size of the granule can be pre-determined to be such that its threshold energy is slightly above the ionization loss of a relativistic charged particle. Then the traversal of the charged particle through such a granule would not affect the superconducting state of the granule unless a transition x-ray radiation is emitted at the surface of the granule by the traversing particle and the x-ray transition radiation is immediately absorbed either in total or partially by the metallic granule causing it to flip to the normal state. The total intensity of the x-ray transition radiation is linearly proportional to the Lorentz factor γ of the traversing particle, and the number of granules flipped would also be a measure of γ. Three methods for detecting the flipping of granules from the superconducting state to the normal state are described. They include the frequency measuring method, the SQUID method, and the pulse method with low noise amplifier system

  14. Recent developments in the European Union radiation protection policy

    International Nuclear Information System (INIS)

    Courades, J.M.

    1996-01-01

    All activities in the field of radiation protection are based on the Euratom Treaty. Both the Single European Act and the Maastricht Treaty leave the Euratom Treaty practically unchanged. So far the Commission has considered that the provisions of the Euratom Treaty, in particular its Chapter III - health and safety, give enough competence to the Community, and an acceptable level of safety is reached through the carrying out of a number of duties incumbent on the Community institutions and the Member States. It is to be noted that the task of the Euratom Treaty, as set out in its Article 1, is to c reate the conditions necessary for the speedy establishment and growth of nuclear industries . However, for several years, the Commission has recognised that the major contribution it could make to achieve the task of the Treaty is by ensuring a high level of protection and safety in all activities concerned with radioactivity and nuclear energy. The following is a list of the major provisions of the Treaty on which activities in the field of radiation protection are based.Article 2b) Euratom Treaty requires the Community to establish uniform safety standards to protect the health of workers and of the general public and ensure that they are applied. The meaning and the procedure for such standards is given in Articles 30-32 of the Treaty. Article 33) of the Euratom Treaty sets out that draft national regulations on radiation protection are communicated to the Commission which may wish to issue recommendations within three months. Article 35 imposes on Member States the establishment of facilities to carry out the environmental monitoring of radioactivity and to ensure compliance with the basic safety standards. It also gives the Commission the right of access to such facilities. Article 37 requires Member States to provide the Commission with such general data on any plan for the disposal of radioactive waste as will make it possible to evaluate its possible impact on

  15. Development of transmission dose estimation algorithm for in vivo dosimetry in high energy radiation treatment

    International Nuclear Information System (INIS)

    Yun, Hyong Geun; Shin, Kyo Chul; Hun, Soon Nyung; Woo, Hong Gyun; Ha, Sung Whan; Lee, Hyoung Koo

    2004-01-01

    In vivo dosimetry is very important for quality assurance purpose in high energy radiation treatment. Measurement of transmission dose is a new method of in vivo dosimetry which is noninvasive and easy for daily performance. This study is to develop a tumor dose estimation algorithm using measured transmission dose for open radiation field. For basic beam data, transmission dose was measured with various field size (FS) of square radiation field, phantom thickness (Tp), and phantom chamber distance (PCD) with a acrylic phantom for 6 MV and 10 MV X-ray. Source to chamber distance (SCD) was set to 150 cm. Measurement was conducted with a 0.6 cc Farmer type ion chamber. By using regression analysis of measured basic beam data, a transmission dose estimation algorithm was developed. Accuracy of the algorithm was tested with flat solid phantom with various thickness in various settings of rectangular fields and various PCD. In our developed algorithm, transmission dose was equated to quadratic function of log(A/P) (where A/P is area-perimeter ratio) and the coefficients of the quadratic functions were equated to tertiary functions of PCD. Our developed algorithm could estimate the radiation dose with the errors within ±0.5% for open square field, and with the errors within ±1.0% for open elongated radiation field. Developed algorithm could accurately estimate the transmission dose in open radiation fields with various treatment settings of high energy radiation treatment. (author)

  16. Development of inventory database for radioisotopes and radiation generators

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Du Hui; Oh, Jin Seon; Park, Chan Geol [Green and Global RADCON Co., LTD, Taejon (Korea, Republic of)

    2000-03-15

    This project is part of the other project, building of unified information network for radiation safety regulation that national computerization agency backs up. Main objectives of this project are inventory data collection, searching for the point at issue, analysis into the issue and collection of partially initial data. The scope of this study consists of : analysis into the previous collected data, making up the investigation table, sending the table to users and gathering data, drawing up the data management plan, making up the system of national inventory control system and procedure.

  17. Two cases of colorectal cancer developed more than 30 years after pelvic radiation therapy

    Energy Technology Data Exchange (ETDEWEB)

    Minami, Mituaki; Aoki, Youzou; Uesaka, Kazunobu; Enomoto, Katuhiko; Shimamoto, Tetuya; Hirabayashi, Naoki [Hashimoto Municipal Hospital, Wakayama (Japan)

    2000-03-01

    We experienced two cases of advanced colorectal cancer developed after radiation therapy. One case was a 66-year old female who had received irradiation for her uterine cancer 35 years before. She was treated for a radiation colitis and a radiation dermatitis 6 years ago. Sigmoid colon cancer was pointed out by barium enema and colonoscopy, and Hartmann's operation was performed. The other case was a 68-year old man who had received irradiation for left malignant orchionous 30 years before. He had the radiation dermatitis in both inguinal region, and had received skin graft for the left inguinal dermatitis. He complained of anal bleeding, and rectal cancer was found out by the colonoscopy. Low anterior resection was performed. Their pathological findings showed mucinous adenocarcinoma. In a review of the Japanese literature, colorectal cancers developed more than 30 years after pelvic radiation therapy have been reported in only 8 cases including these two cases. (author)

  18. Two cases of colorectal cancer developed more than 30 years after pelvic radiation therapy

    International Nuclear Information System (INIS)

    Minami, Mituaki; Aoki, Youzou; Uesaka, Kazunobu; Enomoto, Katuhiko; Shimamoto, Tetuya; Hirabayashi, Naoki

    2000-01-01

    We experienced two cases of advanced colorectal cancer developed after radiation therapy. One case was a 66-year old female who had received irradiation for her uterine cancer 35 years before. She was treated for a radiation colitis and a radiation dermatitis 6 years ago. Sigmoid colon cancer was pointed out by barium enema and colonoscopy, and Hartmann's operation was performed. The other case was a 68-year old man who had received irradiation for left malignant orchionous 30 years before. He had the radiation dermatitis in both inguinal region, and had received skin graft for the left inguinal dermatitis. He complained of anal bleeding, and rectal cancer was found out by the colonoscopy. Low anterior resection was performed. Their pathological findings showed mucinous adenocarcinoma. In a review of the Japanese literature, colorectal cancers developed more than 30 years after pelvic radiation therapy have been reported in only 8 cases including these two cases. (author)

  19. Development of paints with infrared radiation reflective properties

    Directory of Open Access Journals (Sweden)

    Eliane Coser

    2015-06-01

    Full Text Available AbstractLarge buildings situated in hot regions of the Globe need to be agreeable to their residents. Air conditioning is extensively used to make these buildings comfortable, with consequent energy consumption. Absorption of solar visible and infrared radiations are responsible for heating objects on the surface of the Earth, including houses and buildings. To avoid excessive energy consumption, it is possible to use coatings formulated with special pigments that are able to reflect the radiation in the near- infrared, NIR, spectrum. To evaluate this phenomenon an experimental study about the reflectivity of paints containing infrared-reflective pigments has been made. By irradiating with an IR source and by measuring the surface temperatures of the samples we evaluated: color according to ASTM D 2244-14, UV/VIS/NIR reflectance according to ASTM E 903-12 and thermal performance. Additionally, the spectral reflectance and the IR emittance were measured and the solar reflectance of the samples were calculated. The results showed that plates coated with paints containing IR-reflecting pigments displayed lower air temperature on the opposite side as compared to conventional coatings, indicating that they can be effective to reflect NIR and decrease the temperature of buildings when used in roofs and walls.

  20. Development and radiation stability of glasses for highly radioactive wastes

    International Nuclear Information System (INIS)

    Hall, A.R.; Dalton, J.T.; Hudson, B.; Marples, J.A.C.

    1976-01-01

    The variation of formation temperature, crystallizing behaviour and leach resistance with composition changes for sodium-lithium borosilicate glasses suitable for vitrifying Magnox waste are discussed. Viscosities have been measured between 400 and 1050 0 C. The principal crystal phases which occur have been identified as magnesium silicate, magnesium borate and ceria. The leach rate of polished discs in pure water at 100 0 C does not decrease with time if account is taken of the fragile siliceous layer that is observed to occur. The effect of 100 years' equivalent α- and β-irradiation on glass properties is discussed. Stored energy release experiments demonstrated that energy is released over a wide temperature range so that it cannot be triggered catastrophically. Temperatures required to release energy are dependent upon the original storage temperature. Helium release is by Fick's diffusion law up to at least 30% of the total inventory, with diffusion coefficients similar to those for comparable borosilicate glasses. Leach rates were not measurably affected by α-radiation. β-radiation in a Van de Graaff accelerator did not change physical properties, but irradiation in an electron microscope caused minute bubbles in lithium-containing glasses above 200 0 C. (author)

  1. Development of system technology for radiation cancer therapy with the dexterous auto lesions tracking

    International Nuclear Information System (INIS)

    Kim, Seungho; Jeong, Kyungmin; Jung, Seungho; Lee, Namho

    2013-01-01

    The project objectives are to establish the fundamental core technologies for precise auto lesions tracking radiation cancer therapy and developing related system technology as well. Radiation cancer therapy apparatus should be domestically produced to reduce medical expenses, hence advanced technologies are suggested and developed to make cost down medical expenses and save expenditure for importing 10 million dollars/set from overseas. To achieve these targets, we have carried out reviewing of domestic and foreign technology trend. Based on review of state-of-the-art technology, radiation sensory system is studied. 3m high precise image processing technique and intelligent therapy planning software are developed. Also precedent study on the redundant robot for dexterous motion control system has been performed for developing of radiation cancel therapy robot system

  2. Tissue Respiration and Glycolysis in the Development of Acute Radiation Sickness

    National Research Council Canada - National Science Library

    Golubentsev, D

    1960-01-01

    The condition of tissue respiration and glycolysis in the development of acute radiation sickness has been insufficiently studied, and the factual data and opinions of various investigators are frequently contradictory...

  3. ATM Mutations and the Development of Severe Radiation-Induced Morbidity Following Radiotherapy for Breast Cancer

    National Research Council Canada - National Science Library

    Rosenstein, Barry S

    2005-01-01

    The hypothesis being tested in this project is that a greater proportion of patients who develop radiation-induced subcutaneous late tissue morbidity possess a variant allele in the ATM gene compared...

  4. ATM Mutations and the Development of Severe Radiation-Induced Morbidity Following Radiotherapy for Breast Cancer

    National Research Council Canada - National Science Library

    Rosenstein, Barry S

    2006-01-01

    The hypothesis being tested in this project is that a greater proportion of patients who develop radiation-induced subcutaneous late tissue morbidity possess a variant allele in the ATM gene compared...

  5. Some aspects of the development of the Brazilian Synchroton Radiation Project

    International Nuclear Information System (INIS)

    Danon, J.

    1987-01-01

    The history and development of the Brazilian Synchroton Radiation Project are presented. Several aspects of this project may serve as a guide to achieve success in North-South cooperation. (M.W.O.) [pt

  6. Implications of scientific and technological developments for radiation protection in the next decade

    International Nuclear Information System (INIS)

    Johnson, J.R.; Stansbury, P.S.; Paretzke, H.

    1993-01-01

    There are scientific and technological developments taking place that will affect the understanding of the interaction of ionizing radiation with matter, the ability to measure the important parameters of ionizing radiation, and the ability to model radioactivity transport, both in the human body and in the environment. This paper focuses on emerging scientific and technological developments that will impact radiation protection in the next decade. Emerging scientific developments included in this paper are new methods and better analytic capabilities in epidemiology, a better understanding of the interactions between ionizing radiation and the various cellular components and more realistic models to describe the uptake, distribution, retention and excretion of radionuclides in humans. Technological developments include instruments to measure radioactivity in the humans and the environment, and better software to calculate doses from these previously measured quantities

  7. Radiation workers of nuclear power stations and a method of regional economic development

    International Nuclear Information System (INIS)

    Nakagawa, Haruo

    2003-01-01

    In Japan, most of the electric power companies depend on radiation works to the external labor, but the employment of radiation works lacks its' stability. From the analysis on the mobility of radiation workers, we can see the stability of employment increases in proportion to the number of reactors. The radiation work is legally classified to harmful in Japan. And many health control systems for radiation workers are applied strictly. If we apply the health records registration system to the health control systems and involve them to the regional health care system, we can get more effective plan for regional economic development. It is therefore, very important to strive for employee controls, radiation controls, health examinations and data control. Furthermore, it is necessary to establish a total data management system that processes numerous amounts of data concerning radiation employees. This paper proposes the need for such a registration system to set up the system within regional medical information systems, and proposes the establishment of a radiation work market on the web using a total data management system. The system will include radiation employee control information service for members who are planning new employment contracts. (author)

  8. Web design and development for centralize area radiation monitoring system in Malaysian Nuclear Agency

    Science.gov (United States)

    Ibrahim, Maslina Mohd; Yussup, Nolida; Haris, Mohd Fauzi; Soh @ Shaari, Syirrazie Che; Azman, Azraf; Razalim, Faizal Azrin B. Abdul; Yapp, Raymond; Hasim, Harzawardi; Aslan, Mohd Dzul Aiman

    2017-01-01

    One of the applications for radiation detector is area monitoring which is crucial for safety especially at a place where radiation source is involved. An environmental radiation monitoring system is a professional system that combines flexibility and ease of use for data collection and monitoring. Nowadays, with the growth of technology, devices and equipment can be connected to the network and Internet to enable online data acquisition. This technology enables data from the area monitoring devices to be transmitted to any place and location directly and faster. In Nuclear Malaysia, area radiation monitor devices are located at several selective locations such as laboratories and radiation facility. This system utilizes an Ethernet as a communication media for data acquisition of the area radiation levels from radiation detectors and stores the data at a server for recording and analysis. This paper discusses on the design and development of website that enable all user in Nuclear Malaysia to access and monitor the radiation level for each radiation detectors at real time online. The web design also included a query feature for history data from various locations online. The communication between the server's software and web server is discussed in detail in this paper.

  9. Developing a training programme for radiation protection officers at industrial irradiators

    International Nuclear Information System (INIS)

    Davor, P.

    2013-04-01

    A training programme for staff of irradiation facilities especially radiation safety officers at industrial irradiation facilities has been developed. The programme focused on technical and administrative basis for ensuring radiation safety at the practices. It consists of thirteen modules ranging from fundamentals of radiation, biological effects of ionizing radiation as well as the technical and administrative issues pertinent to radiation safety of the sources. The overall objective of this programme was to build competence in the area of radiation protection and raise the confidence level of staff of industrial irradiation facilities. The modules are structured in a manner that attempts to give a good understanding to participants on safety features of irradiators and use of radiation monitoring equipment. Each module has specific objectives and expected outcome and the course content is also stated under each module. The duration of the whole programme is sixteen weeks and the participants are expected to have some working knowledge in radiation protection and safe use of radiation sources. (au)

  10. Development of Preparation Methods for Alkaline Anion Exchange Membranes by Radiation

    International Nuclear Information System (INIS)

    Shin, Jun Hwa; Nho, Young Chang; Sohn, Joon Yong

    2010-01-01

    The objective of this project is to contribute to the environmentally friendly fuel cell system by developing a radiation grafting method for the preparation of anion exchange membranes for alkaline fuel cell and finally to the radiation technology industry. In this project, the preparation methods for the VBC-grafted fluoropolymer films using radiation have been developed and anion exchange membranes have been prepared via the reaction between the VBC-grafted fluoropolymer films and amines. The prepared anion exchange membranes were characterized and the performance of the membranes were evaluated

  11. High-throughput identification of ionizing radiation-sensitive plant genes and development of radiation indicator plant and radiation sensing Genechip

    International Nuclear Information System (INIS)

    Kim, Dong Sub; Kim, Jinbaek; Ha, Bokeun; Kim, Sang Hoon; Kim, Sunhee

    2013-05-01

    Physiological analysis of monocot model plant (rice) in response to ionizing radiation (cosmic-ray, gamma-ray, Ion beam). - Identification of antioxidant characters through cytochemical analysis. - Comparison of antioxidant activities in response to ionizing irradiation. - Evaluation of anthocyanin quantity in response to ionizing irradiation. Ionization energy response gene family analysis via bioinformatic validation. - Expression analysis of monocot and dicot gene families. - In silico and bioinformatic approach to elucidate gene function. Characterization and functional analysis of genes specifically expressed in response to ionizing irradiation (cosmic-ray, gamma-ray, Ion beam). - High throughput trancriptomic analysis of plants under ionizing radiation using microarray. - Promotor and cis-element analysis of genes specifically expressed in response to ionizing radiation. - Validation and function analysis of candidate genes. - Elucidation of plant mechanism of sensing and response to ionization energy. Development of bioindicator plants detecting ionization energy. - Cloning and identification of 'Radio marker genes (RMG)'. - Development of Over-expression (O/E) or Knock-out (K/O) plant using RMG. Development of Genechip as an ionization energy detector. - Expression profiling analysis of genes specifically expression in response to ionization energy. - Prepare high-conserved gene specific oligomer. - Development of ionization energy monitoring Genechip and application

  12. High-throughput identification of ionizing radiation-sensitive plant genes and development of radiation indicator plant and radiation sensing Genechip

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dong Sub; Kim, Jinbaek; Ha, Bokeun; Kim, Sang Hoon; Kim, Sunhee

    2013-05-15

    Physiological analysis of monocot model plant (rice) in response to ionizing radiation (cosmic-ray, gamma-ray, Ion beam). - Identification of antioxidant characters through cytochemical analysis. - Comparison of antioxidant activities in response to ionizing irradiation. - Evaluation of anthocyanin quantity in response to ionizing irradiation. Ionization energy response gene family analysis via bioinformatic validation. - Expression analysis of monocot and dicot gene families. - In silico and bioinformatic approach to elucidate gene function. Characterization and functional analysis of genes specifically expressed in response to ionizing irradiation (cosmic-ray, gamma-ray, Ion beam). - High throughput trancriptomic analysis of plants under ionizing radiation using microarray. - Promotor and cis-element analysis of genes specifically expressed in response to ionizing radiation. - Validation and function analysis of candidate genes. - Elucidation of plant mechanism of sensing and response to ionization energy. Development of bioindicator plants detecting ionization energy. - Cloning and identification of 'Radio marker genes (RMG)'. - Development of Over-expression (O/E) or Knock-out (K/O) plant using RMG. Development of Genechip as an ionization energy detector. - Expression profiling analysis of genes specifically expression in response to ionization energy. - Prepare high-conserved gene specific oligomer. - Development of ionization energy monitoring Genechip and application.

  13. Some statistical issues important to future developments in human radiation research

    International Nuclear Information System (INIS)

    Vaeth, Michael

    1991-01-01

    Using his two years experience at the Radiation Effects Research Foundation at Hiroshima, the author tries to outline some of the areas of statistics where methodologies relevant to the future developments in human radiation research are likely to be found. Problems related to statistical analysis of existing data are discussed, together with methodological developments in non-parametric and semi-parametric regression modelling, and interpretation and presentation of results. (Author)

  14. Present status of radiation processing and its future development by using electron accelerator in Vietnam

    International Nuclear Information System (INIS)

    Tran Khac An; Tran Tich Canh; Doan Binh; Nguyen Quoc Hien

    2003-01-01

    In Vietnam, studies on Radiation Processing have been carried out since 1983. Some results are applicable in the field of agriculture, health and foodstuff, some researches were developed to commercial scale and others have high potential for development by using electron accelerator. The paper offers the present status of radiation processing and also give out the growing tendency of using electron accelerator in the future. (author)

  15. The influence of low level γ-radiation on the development of bombyx Mori L

    International Nuclear Information System (INIS)

    Yusifov, N.I.; Kuzin, A.M.; Agaev, F.A.; Mozgovoj, E.G.; AN Azerbajdzhanskoj SSR, Baku. Sektor Radiatsionnykh Issledovanij)

    1988-01-01

    Chronic γ-irradiation of a grain at a dose-rate 100, 1000 and 4000 times as high as that of the natural radiation background significantly accelerates the development of Bombyx moti L. The caterpillar development may also be stimulated by a single exposure of the grain to 2 Gy radiation. The acceleration of the caterpillar growth promotes the increase in the cocoon weight and the raw-silk mass

  16. Investigation into the effects of ionizing radiations on growth, development and productivity of alfalfa

    International Nuclear Information System (INIS)

    Mirchev, M.; Antonova, N.

    1974-01-01

    The purpose of this study was to establish optimal doses of gamma radiation for the normal growth and development of alfalfa and for securing the highest possible yields of hay and seed. It is concluded that: presowing irradiation of alfalfa seeds from a Cs 137 source has a beneficial effect on alfalfa growth and development and on the yields of alfalfa hay and seeds; the optimal radiation dose for seeds is 1300 rad; the irradiated seeds retain their germinating power. (E.T.)

  17. Proceedings of Scientific Meeting on Research and Development of Isotopes and Radiation Technology

    International Nuclear Information System (INIS)

    Hilmy, Nazly; Ismachin, Moch; Suhadi, F.

    2002-01-01

    Proceedings of Scientific Meeting On Research and Development of Isotopes and Radiation Technology has been presented On Nopember 6-7, 2000 this activity that was held by Centre for Research and Development of Isotopes and Radiation Technolgy. The Scientific meeting is an information exchange facility among Researcher Industrialist for using isotope Technology in Industry Environment, Health, Agriculture and Farming. The proceedings Consist of 3 articles from keynotes speaker and 54 articles from BATAN participants as well outside. The articles is indexing separately

  18. Present status of radiation processing and its future development by using electron accelerator in Vietnam

    Energy Technology Data Exchange (ETDEWEB)

    Tran Khac An; Tran Tich Canh; Doan Binh [Research and Development Center for Radiation Technology (VINAGAMMA), Ho Chi Minh (Viet Nam); Nguyen Quoc Hien [Nuclear Research Institute (NRI), Dalat (Viet Nam)

    2003-02-01

    In Vietnam, studies on Radiation Processing have been carried out since 1983. Some results are applicable in the field of agriculture, health and foodstuff, some researches were developed to commercial scale and others have high potential for development by using electron accelerator. The paper offers the present status of radiation processing and also give out the growing tendency of using electron accelerator in the future. (author)

  19. Anthology of the development of radiation transport tools as applied to single event effects

    International Nuclear Information System (INIS)

    Akkerman, A.; Barak, J.; Murat, M.; Duzellier, S.; Hubert, G.; Gaillardin, M.; Raine, M.; Jordan, T.; Jun, I.; Koontz, S.; Reddell, B.; O'Neill, P.; Foster, C.; Culpepper, W.; Lei, F.; McNulty, P.; Nieminen, P.; Saigne, F.; Wrobel, F.; Santin, G.; Sihver, L.; Tang, H.H.K.; Truscott, P.R.

    2013-01-01

    This anthology contains contributions from eleven different groups, each developing and/or applying Monte Carlo-based radiation transport tools to simulate a variety of effects that result from energy transferred to a semiconductor material by a single particle event. The topics span from basic mechanisms for single-particle induced failures to applied tasks like developing web sites to predict on-orbit single event failure rates using Monte Carlo radiation transport tools. (authors)

  20. Anthology of the Development of Radiation Transport Tools as Applied to Single Event Effects

    Science.gov (United States)

    Reed, R. A.; Weller, R. A.; Akkerman, A.; Barak, J.; Culpepper, W.; Duzellier, S.; Foster, C.; Gaillardin, M.; Hubert, G.; Jordan, T.; Jun, I.; Koontz, S.; Lei, F.; McNulty, P.; Mendenhall, M. H.; Murat, M.; Nieminen, P.; O'Neill, P.; Raine, M.; Reddell, B.; Saigné, F.; Santin, G.; Sihver, L.; Tang, H. H. K.; Truscott, P. R.; Wrobel, F.

    2013-06-01

    This anthology contains contributions from eleven different groups, each developing and/or applying Monte Carlo-based radiation transport tools to simulate a variety of effects that result from energy transferred to a semiconductor material by a single particle event. The topics span from basic mechanisms for single-particle induced failures to applied tasks like developing websites to predict on-orbit single event failure rates using Monte Carlo radiation transport tools.

  1. Development of Poly (Lactic Acid) Nanocomposite Films by Ionizing Radiation

    Energy Technology Data Exchange (ETDEWEB)

    Dadbin, Susan; Naimian, Faranak; Akhavan, Azam; Hasanpoor, Sorour [Radiation Application Research School, Nuclear Science and Research Institute, North Kargar Ave., Tehran (Iran, Islamic Republic of)

    2009-07-01

    Poly (lactic acid) and poly (lactic acid) -montmorillonite (MMT) nanocomposite films have been prepared by solvent casting method. Films were irradiated with 60Co radiation facility at various doses in the range of 5 to30 kGy. The effect of gamma irradiation on mechanical properties of neat PLA and nanocomposites is evaluated by the data obtained from tensile testing measurements. The degree of crosslinking is measured by gel content method. Thermal behavior of nanocomposites is studied by differential scanning calorimetry (DSC) and thermal gravimetry analysis (TGA). The morphology of the nanocomposites is characterized by transmission electron microscopy (TEM) and X ray diffraction. Structural changes in poly (lactic acid) are studied by Fourier transform infrared (FTIR). (author)

  2. Development of Poly (Lactic Acid) Nanocomposite Films by Ionizing Radiation

    International Nuclear Information System (INIS)

    Dadbin, Susan; Naimian, Faranak; Akhavan, Azam; Hasanpoor, Sorour

    2009-01-01

    Poly (lactic acid) and poly (lactic acid) -montmorillonite (MMT) nanocomposite films have been prepared by solvent casting method. Films were irradiated with 60Co radiation facility at various doses in the range of 5 to30 kGy. The effect of gamma irradiation on mechanical properties of neat PLA and nanocomposites is evaluated by the data obtained from tensile testing measurements. The degree of crosslinking is measured by gel content method. Thermal behavior of nanocomposites is studied by differential scanning calorimetry (DSC) and thermal gravimetry analysis (TGA). The morphology of the nanocomposites is characterized by transmission electron microscopy (TEM) and X ray diffraction. Structural changes in poly (lactic acid) are studied by Fourier transform infrared (FTIR). (author)

  3. Development of radiation detection and measurement system - Development of microcalorimeter for the radioactivity measurement

    Energy Technology Data Exchange (ETDEWEB)

    Jun, Jae Shik; Jung, H. J.; Chai, H. S.; Han, W. S. [Chungnam National University, Taejon (Korea)

    2000-03-01

    A unique multi-purpose radiation transport code has been developed and expected to be used in various fields of radiation physics and engineering. The present model is a hybrid in which the restricted energy-loss straggling is applied as in the Class I algorithm and the correlation in the secondary electron production is maintained explicitly. Output electromotive forces from the several types of the heat flux sensors have been measured as a function of the temperature differences between both end-plates of the sensors. Based on the analysis of the measurements, we could select the most appropriate type for our purpose, the sensitivity of which is greater than 45 mV/K. Heat source has also been fabricated with manganin wires and the uncertainty has been estimated to be less than 0.1%. The calorimetric core has been installed in the temporary thermal jacket surrounded by thick styrofoam and the signal from the core has been measured with power varying in the range {mu}W {approx} mW. The reproducibility has been found to be better than 0.5% for power greater than 60 {mu}W/s. In addition, it is confirmed that the heat generated by Co-60 and Ir-192 sources frequently used in industries, medicine and biology with very high level of the activity could be measured with the reproducibility better than that above mentioned. On the whole, the performance characteristics of the calorimetric core could be comparable to those commercially available. 139 refs., 40 figs., 7 tabs. (Author)

  4. Development of pilot model of virtual nuclear power plant and its application to radiation management

    International Nuclear Information System (INIS)

    Kang, K. D.; Sin, S. W.

    2002-01-01

    Using Virtual Reality (VR) technique, a real model for radiation controlled area in nuclear power plant was developed and a feasibility study to develop a computational program to estimate radiation dose was performed. For this purpose a pilot model with an dynamic function and bi-directional communication was developed. This model was enhanced from the existing 3-D single-directional communication. In this pilot model, a plant visitor needs a series of security checking process initially. If he(she) enters the controlled area and approaches radiation hazard area, the alarms with warning lamp will be initiated automatically. Throughout the test to connect this model from both domestic and international sites in various time zones it has proven that it showed a sufficient performance. Therefore this model can be applied to broad fields as radiation protection procedures photographic data, on-line dose program

  5. Advisory group meeting on new trends and developments in radiation technology

    International Nuclear Information System (INIS)

    1993-02-01

    High energy, ionizing radiation (gamma and electron beams) has been used by industry for many years and for different applications. Well established applications include: industrial sterilization of health care products (medical products and medicinals), radiation modification of plastics (crosslinking of wire and cable insulation, heat shrinkable materials, etc.) and radiation curing of adhesives and coatings on different substrates. The main purpose of the Advisory Group Meeting was to provide a forum for an exchange of information about the new developments in radiation technology, to review the status of these developments and to discuss potential for commercial applications. A further objective was to discuss the role of the International Atomic Energy Agency in promoting new technologies, research and transfer of technology to developing countries. The meeting was expected to prepare recommendations to the Agency for future activities and programmes in this field. Refs, figs and tabs

  6. Development of nuclear energy and radiation textbooks for high school students

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seung Koo; Park, Pil Han; Choi, Yoon Seok; Kim, Wook; Jeong, Im Soon; Han, Eun Ok [Dept. of Education and Research, Korea Academy of Nuclear Safety, Seoul (Korea, Republic of)

    2015-04-15

    This study aimed to develop textbooks about nuclear energy and radiation targeting high school students-the leaders of the next generation. Students learn about nuclear power generation and radiation through minimal information in science textbooks; most students acquire concepts through teaching-learning activities between teachers and students. Therefore, if a science teacher has an inaccurate perception about nuclear energy and radiation, this may have an improper influence on students. Before the failure of securing social acceptance due to ignorance about nuclear energy and radiation leads to biased political effects, the correct information should be provided in schools to allow future generations to develop educated value judgments. The present textbooks were developed as a part of such effort.

  7. Development of nuclear energy and radiation textbooks for high school students

    International Nuclear Information System (INIS)

    Lee, Seung Koo; Park, Pil Han; Choi, Yoon Seok; Kim, Wook; Jeong, Im Soon; Han, Eun Ok

    2015-01-01

    This study aimed to develop textbooks about nuclear energy and radiation targeting high school students-the leaders of the next generation. Students learn about nuclear power generation and radiation through minimal information in science textbooks; most students acquire concepts through teaching-learning activities between teachers and students. Therefore, if a science teacher has an inaccurate perception about nuclear energy and radiation, this may have an improper influence on students. Before the failure of securing social acceptance due to ignorance about nuclear energy and radiation leads to biased political effects, the correct information should be provided in schools to allow future generations to develop educated value judgments. The present textbooks were developed as a part of such effort

  8. Development of radiation-induced mutation techniques and functional genomics studies

    International Nuclear Information System (INIS)

    Kim, Dong Sub; Kang, Si Yong; Kim, Jin Baek

    2012-01-01

    This project has been performed to develop plant genetic resources using radiation (gamma-rays, ion-beam, space environments), to conduct functional genomics studies with mutant resources, and to develop new radiation plant breeding techniques using various radiation sources during 3 years. In the first section, we developed flower genetic resources, functional crop resources, and bio-industrial plant resources. In the second section, we cloned several mutated genes and studied mechanisms of gene expression and genetic diversity of mutations induced by gamma-rays. In the third section, we developed new plant breeding techniques using gamma-phytotron, heavy ion-beam, and space environments. Based on these results, a total of 8 cultivars containing Chrysanthemum, Hibiscus, kenaf, rice, and soybean were applied for plant variety protection (PVP) and a total of 4 cultivars were registered for PVP. Also, license agreement for the dwarf type Hibiscus mutant 'Ggoma' was conducted with Supro co. and the manufacturing technology for natural antioxidant pear-grape vinegar was transferred into Enzenic co. Also, 8 gene sequences, such as F3'H and LDOX genes associated with flower color in Chrysanthemum and EPSPS gene from Korean lawn grass, were registered in the database of National Center for Biotechnology Information (NCBI). In the future study, we will develop new radiation mutation breeding techniques through the mutation spectrum induced by various radiation sources, the studies for mechanism of the cellular response to radiation, and the comparative·structural·functional genomics studies for useful traits

  9. How radiation influences atherosclerotic plaque development. A biophysical approach in ApoE{sup -/-} mice

    Energy Technology Data Exchange (ETDEWEB)

    Kloosterman, Astrid; Dillen, Teun van; Dekkers, Fieke [National Institute for Public Health and the Environment (RIVM), Centre for Environmental Safety and Security, Bilthoven (Netherlands); Bijwaard, Harmen [National Institute for Public Health and the Environment (RIVM), Centre for Environmental Safety and Security, Bilthoven (Netherlands); Inholland University of Applied Sciences, Medical Technology Research Group, Haarlem (Netherlands); Heeneman, Sylvia [Maastricht University Medical Center, Experimental Vascular Pathology group, Department of Pathology, Cardiovascular Research Institute Maastricht (CARIM), Maastricht (Netherlands); Hoving, Saske; Stewart, Fiona A. [Netherlands Cancer Institute - Antoni van Leeuwenhoek Hospital, Division of Biological Stress Response (H3), Amsterdam (Netherlands)

    2017-11-15

    Atherosclerosis is the development of lipid-laden plaques in arteries and is nowadays considered as an inflammatory disease. It has been shown that high doses of ionizing radiation, as used in radiotherapy, can increase the risk of development or progression of atherosclerosis. To elucidate the effects of radiation on atherosclerosis, we propose a mathematical model to describe radiation-promoted plaque development. This model distinguishes itself from other models by combining plaque initiation and plaque growth, and by incorporating information from biological experiments. It is based on two consecutive processes: a probabilistic dose-dependent plaque initiation process, followed by deterministic plaque growth. As a proof of principle, experimental plaque size data from carotid arteries from irradiated ApoE{sup -/-} mice was used to illustrate how this model can provide insight into the underlying biological processes. This analysis supports the promoting role for radiation in plaque initiation, but the model can easily be extended to include dose-related effects on plaque growth if available experimental data would point in that direction. Moreover, the model could assist in designing future biological experiments on this research topic. Additional biological data such as plaque size data from chronically-irradiated mice or experimental data sets with a larger variety in biological parameters can help to further unravel the influence of radiation on plaque development. To the authors' knowledge, this is the first biophysical model that combines probabilistic and mechanistic modeling which uses experimental data to investigate the influence of radiation on plaque development. (orig.)

  10. Pathophysiological effects of radiation on atherosclerosis development and progression, and the incidence of cardiovascular complications

    International Nuclear Information System (INIS)

    Basavaraju, Sekhara Rao; Easterly, Clay E.

    2002-01-01

    Radiation therapy while important in the management of several diseases, is implicated in the causation of atherosclerosis and other cardiovascular complications. Cancer and atherosclerosis go through the same stages of initiation, promotion, and complication, beginning with a mutation in a single cell. Clinical observations before the 1960s lead to the belief that the heart is relatively resistant to the doses of radiation used in radiotherapy. Subsequently, it was discovered that the heart is sensitive to radiation and many cardiac structures may be damaged by radiation exposure. A significantly higher risk of death due to ischemic heart disease has been reported for patients treated with radiation for Hodgkin's disease and breast cancer. Certain cytokines and growth factors, such as TGF-β1 and IL-1 β, may stimulate radiation-induced endothelial proliferation, fibroblast proliferation, collagen deposition, and fibrosis leading to advanced lesions of atherosclerosis. The treatment for radiation-induced ischemic heart disease includes conventional pharmacological therapy, balloon angioplasty, and bypass surgery. Endovascular irradiation has been shown to be effective in reducing restenosis-like response to balloon-catheter injury in animal models. Caution must be exercised when radiation therapy is combined with doxorubicin because there appears to be a synergistic toxic effect on the myocardium. Damage to endothelial cells is a central event in the pathogenesis of damage to the coronary arteries. Certain growth factors that interfere with the apoptotic pathway may provide new therapeutic strategies for reducing the risk of radiation-induced damage to the heart. Exposure to low level occupational or environmental radiation appears to pose no undue risk of atherosclerosis development or cardiovascular mortality. But, other radiation-induced processes such as the bystander effects, abscopal effects, hormesis, and individual variations in radiosensitivity may be

  11. Development of radiation hard components for ITER blanket remote handling system

    Energy Technology Data Exchange (ETDEWEB)

    Saito, Makiko, E-mail: saito.makiko@jaea.go.jp; Anzai, Katsunori; Maruyama, Takahito; Noguchi, Yuto; Ueno, Kenichi; Takeda, Nobukazu; Kakudate, Satoshi

    2016-11-01

    Highlights: • Clarify the components that will degrade by gamma ray irradiation. • Perform the irradiation tests to BRHS components. • Optimize the materials to increase the radiation hardness. - Abstract: The ITER blanket remote handling system (BRHS) will be operated in a high radiation environment (250 Gy/h max.) and must stably handle the blanket modules, which weigh 4.5 t and are more than 1.5 m in length, with a high degree of position and posture accuracy. The reliability of the system can be improved by reviewing the failure events of the system caused by high radiation. A failure mode and effects analysis (FMEA) identified failure modes and determined that lubricants, O-rings, and electric insulation cables were the dominant components affecting radiation hardness. Accordingly, we tried to optimize the lubricants and cables of the AC servo motors by using polyphenyl ether (PPE)-based grease and polyether ether ketone (PEEK), respectively. Materials containing radiation protective agents were also selected for the cable sheaths and O-rings to improve radiation hardness. Gamma ray irradiation tests were performed on these components and as a result, a radiation hardness of 8 MGy was achieved for the AC servo motors. On the other hand, to develop the radiation hardness and BRHS compatibility furthermore, the improvement of materials of cable and O ring were performed.

  12. A strategy to develop and implement Canadian standards for quality assurance in radiation therapy

    International Nuclear Information System (INIS)

    1999-05-01

    In Canada, the Atomic Energy Control Board (AECB) regulates the limits of radiation exposure to the public and to workers in industry. In 1993, it discussed the fact that the safety of radiation therapy patients who receive medical exposures is not regulated [AE93]. The Group of Medical Advisors (GMA) to the AECB initiated a research contract to review quality assurance in Canadian radiation oncology centres and nuclear medicine departments. The review [MA95] revealed that the level of quality assurance in radiation therapy facilities varied across the country. As a result, the GMA undertook its own review of quality assurance in radiation therapy centres and made recommendations on how to achieve a uniform national system [MA98]. In response to the GMA report, the President of the AECB formed a Joint Working Group (JWG-11) to propose how Canadian Standards for Quality Assurance in Radiation Therapy could be developed and implemented. These national standards for quality assurance will serve as a common basis for establishing and evaluating quality assurance programs at individual radiation therapy centres. These standards should address the structure of quality assurance programs and quality assurance for radiation therapy equipment, personnel, and procedures. (author)

  13. Study on Basic Characteristics for the Development of Radiation Shielding High-Weight Concrete

    Energy Technology Data Exchange (ETDEWEB)

    Mun, Young Bum; Lee, Jea Hyung; Choi, Hyun Kook [Sungshin Cement CO., Sejong (Korea, Republic of); Oh, Jeong Hwan; Choi, Soo Seok [Jeju National University, Jeju (Korea, Republic of)

    2016-05-15

    It is planned to build a power plant more than 6 units. Although the demand of a nuclear power plant is going to increase, the attention for radiation shielding is relatively in a low level. Concrete is one of the excellent and widely used shielding materials. Since the radiation shielding of a given material is proportional to density and thickness, a high-weight concrete with high-weight aggregate which is higher than normal concrete is used for radiation shielding. However, there are a few studies and references about radiation shielding concrete. Therefore, it is required to find a high-weight aggregate. The purpose of this paper is the development of a highweight concrete to improve radiation shielding capability. The radiation shielding rate of high-weight concrete is higher than that of reference concrete. It is confirmed that the density of aggregate and the unit weight of concreate is proportional to the radiation shielding rate. In addition, the chemical composition of aggregate has also has an important effect on γ-ray shielding. Therefore, high weight aggregates of higher density are essentially required to improve radiation shielding capability. The compressive strength of a high weight concrete is better than that of reference concrete. Slump and air contents, however, are slightly increased with by-product aggregates.

  14. Atoms in industry: Radiation technology supports development [Foreword

    International Nuclear Information System (INIS)

    Amano, Yukiya

    2015-01-01

    Cutting-edge industrial technologies underpin the success of strong economies, in developed and developing countries alike. Nuclear science and technology, in particular, can make a major contribution to economic growth and competitiveness, and have an important role to play in support of sustainable development. The IAEA helps to make nuclear science and technology available to enable countries to pursue wider development objectives in areas including human health, agriculture, natural resource management and environmental protection. This edition of the IAEA Bulletin highlights some of the ways in which the technology is being put to effective use in industry.

  15. Developments in physical dosimetry and radiation protection; Entwicklungen in der physikalischen Dosimetrie im Strahlenschutz

    Energy Technology Data Exchange (ETDEWEB)

    Fiebich, Martin [Technische Hochschule Mittelhessen, Giessen (Germany). Inst. fuer Medizinische Physik und Strahlenschutz

    2017-07-01

    In the frame of physical dosimetry new dose units have been defined: the depth personal dose (equivalent dose in 10 mm depth) and the surface personal dose (equivalent dose in 0.07 mm depth). Physical dosimetry is applied for the determination of occupational radiation exposure, the radiation protected area control, the estimation of radiation exposure of patients during radiotherapy, for quality assurance and in research projects and optimization challenges. Developments have appeared with respect to punctual measuring chambers, eye lens dosimetry, OSL (optically stimulated luminescence) dosimetry, real-time dosimetry and Monte Carlo methods. New detection limits of about 1 micro Gy were reached.

  16. Development of a contact heat exchanger for a constructable radiator system

    Science.gov (United States)

    Howell, H. R.

    1983-01-01

    A development program for a contact heat exchanger to be used to transfer heat from a spacecraft coolant loop to a heat pipe radiator is described. The contact heat exchanger provides for a connectable/disconnectable joint which allows for on-orbit assembly of the radiator system and replacement or exchange of radiator panels for repair and maintenance. The contact heat exchanger does not require the transfer of fluid across the joint; the spacecraft coolant loop remains contained in an all welded system with no static or dynamic fluid seals. The contact interface is also "dry' with no conductive grease or interstitial material required.

  17. Development of wide-area radiation monitor using an optical fiber

    International Nuclear Information System (INIS)

    Kawata, Naoki; Kato, Masatoshi; Baba, Mamoru; Yamadera, Akira; Miura, Takako

    2002-01-01

    We have developed a method for radiation distribution measurement by combining an optical fiber of wave-length shift type with a plastic scintillator, and studied its properties to apply as a wide-area radiation monitor. The detector employs two photomultipliers in both ends of the fiber and locate the radiation position by using the difference of light arrival time from scintillators. We tested the detector with gamma-rays and neutrons concerning with the position-response and pulse-height response of the detector. From the experiment, we confirmed the proper operation of the detector and position response with spatial resolution of 30-60 cm

  18. Development of Radiation Processing to Functionalize Carbon Nanofiber to Use in Nanocomposites for Industrial Application

    International Nuclear Information System (INIS)

    Gondim de Andrade e Silva, Leonardo; Evora, Maria Cecilia

    2011-01-01

    The effects of ionizing radiation on carbon materials have been thoroughly investigated because of its importance in the fields of nuclear, medical, and materials science. Basically, the effect of ionizing radiation on carbon materials takes place as a displacement of carbon atoms from their amorphous or graphitic structures. For nanocarbon materials, only destructive effects were observed in early experiments involving bombardment of carbon nanotubes and fullerenes with ions. However, recent work reveals that radiation can exploit defect creation for novel materials development especially in electronic nanotechnology (Krasheninnikov et al., 2007)

  19. Mandibular third molar development after mantle radiation in long-term survivors of childhood Hodgkin's disease

    International Nuclear Information System (INIS)

    McGinnis, J.P. Jr.; Hopkins, K.P.; Thompson, E.I.; Hustu, H.O.

    1987-01-01

    Sequential panoramic radiographs were assessed for mandibular third molar development in 47 long-term survivors of childhood Hodgkin's disease after treatment with 37 Gy mantle field radiation. To make a comparison, panoramic radiographs of 149 healthy, nonirradiated children were reviewed for the presence of mandibular third molars. In children between the ages of 7 and 12 years, bilateral agenesis of mandibular third molars was more frequent in patients who had been treated with mantle radiation than in nonirradiated patients. Unilateral agenesis, crown hypoplasia, and root growth impairment of mandibular third molars were also found. Similar, apparent, radiation-induced developmental anomalies were noted in maxillary third molars of the irradiated patients

  20. Development of Radiation Processing to Functionalize Carbon Nanofiber to Use in Nanocomposites for Industrial Application

    Energy Technology Data Exchange (ETDEWEB)

    Gondim de Andrade e Silva, Leonardo, E-mail: lgasilva@ipen.br [Institute for Nuclear and Energy Research – IPEN, Av. Prof. Lineu Prestes, 2242 Cidade Universitaria, 05508-000 São Paulo – SP (Brazil); Evora, Maria Cecilia, E-mail: cecilia@ieav.cta.br [Institute of Advanced Studies – IEAv, Av. Cel Av José Alberto Albano do Amarante, 1 Putim, 12228-001 São José dos Campos – SP (Brazil)

    2011-07-01

    The effects of ionizing radiation on carbon materials have been thoroughly investigated because of its importance in the fields of nuclear, medical, and materials science. Basically, the effect of ionizing radiation on carbon materials takes place as a displacement of carbon atoms from their amorphous or graphitic structures. For nanocarbon materials, only destructive effects were observed in early experiments involving bombardment of carbon nanotubes and fullerenes with ions. However, recent work reveals that radiation can exploit defect creation for novel materials development especially in electronic nanotechnology (Krasheninnikov et al., 2007)

  1. The Development and Numerical Analysis of the Conical Radiator Extrusion Process

    Directory of Open Access Journals (Sweden)

    Michalczyk J.

    2017-12-01

    Full Text Available The article presents a newly developed method for single-operation extrusion of conical radiators. This is the author’s radiator manufacturing method being the subject of a patent application. The proposed method enables the manufacture of radiators either with or without an inner opening and with an integral plate. Selected results of numerical computations made within Forge®3D, a finite element method (FEM-based software program, were presented during the analysis of the process. A comparative analysis of the proposed manufacturing method using the double-sided extrusion method was also made.

  2. Advanced development of catalysts by using the high-brilliance synchrotron radiation in SPring-8

    International Nuclear Information System (INIS)

    2006-10-01

    The advanced development of catalysts by using the high-brilliance synchrotron radiation in SPring-8 is described: (1) the industrial use of SPring-8, (2) the analytical methods of catalyst using SPring-8 (XAFS, powder X-ray diffraction, thin film X-ray scattering, X-ray imaging, infrared analysis, X-ray fluorescence analysis, and photoelectron spectroscopy etc.), (3) the history of synchrotron radiation and catalyst investigations, (4) the new advanced measuring methods of catalyst using synchrotron radiation (various X-ray spectroscopic methods, and application of XAFS to highly-disperse systems of catalyst), and (5) the new advanced development of catalysts using synchrotron radiation and its applications (motor-car catalysts, light catalysts, fuel cells, nanotechnology, and trace amounts of catalyst in wastes). (M.H.)

  3. \\title{Development of Radiation Damage Models for Irradiated Silicon Sensors Using TCAD Tools}

    CERN Document Server

    Bhardwaj, Ashutosh; Lalwani, Kavita; Ranjan, Kirti; Printz, Martin; Ranjeet, Ranjeet; Eber, Robert; Eichhorn, Thomas; Peltola, Timo Hannu Tapani

    2014-01-01

    Abstract. During the high luminosity upgrade of the LHC (HL-LHC) the CMS tracking system will face a more intense radiation environment than the present system was designed for. In order to design radiation tolerant silicon sensors for the future CMS tracker upgrade it is fundamental to complement the measurement with device simulation. This will help in both the understanding of the device performance and in the optimization of the design parameters. One of the important ingredients of the device simulation is to develop a radiation damage model incorporating both bulk and surface damage. In this paper we will discuss the development of a radiation damage model by using commercial TCAD packages (Silvaco and Synopsys), which successfully reproduce the recent measurements like leakage current, depletion voltage, interstrip capacitance and interstrip resistance, and provides an insight into the performance of irradiated silicon strip sensors.

  4. Numbers game : using aluminum helps Global Heat Transfer develop new frac radiators

    Energy Technology Data Exchange (ETDEWEB)

    Marsters, S.

    2009-11-15

    Aluminum is thought to be a beneficial new option for the construction of frac radiators. This article discussed how aluminum has been used to help Global Heat Transfer Ltd. (GHT) develop new frac radiators. The company developed the Jumbotron, an all-aluminum frac radiator that achieved 3,000 horsepower, but with less weight than a typical 2,250 horsepower package. The article provided information on Jumbotron, including how it was conceptualized, its features, applications, and other details. Background information on GHT was also presented. GHT focuses on the oil and gas and mining sectors and has over 500 employees worldwide in 15 locations. The aluminum parts for the Jumbotron frac radiator are produced at one of GHT's China facilities and brought to Canada for final assembly. 1 fig.

  5. Recent progress of the RD50 Collaboration – Development of radiation tolerant tracking detectors

    CERN Document Server

    Moll, M

    2014-01-01

    The CERN RD50 Collaboration "Radiation hard semiconductor devices for high luminosity col- liders" is undertaking a massive R&D; programme across High Energy Physics (HEP) Experi- ments boundaries to develop silicon sensors with increased radiation tolerance. Highest priority is to provide concepts and prototypes of high performance silicon sensors for the High-Luminosity Large Hadron Collider (HL-LHC) Experiments at CERN and other future HEP Experiments op- erating in severe radiation environments. This paper gives an overview of the RD50 collaboration activities and describes some examples of recent developments. Emphasis is put on the charac- terization of microscopic radiation induced defects and their impact on the sensor performance, the evaluation and parametrization of electric fields inside irradiated sensors, progress in device modeling using TCAD tools, the use of p-type silicon as strip and pixel sensor material and finally the first steps towards the exploitation of impact ionization ( charge...

  6. Attenuation of a radiation-induced conditioned taste aversion after the development of ethanol tolerance

    International Nuclear Information System (INIS)

    Hunt, W.A.; Rabin, B.M.

    1988-01-01

    An attempt to reduce a radiation-induced conditioned taste aversion (CTA) was undertaken by rendering animals tolerant to ethanol. Ethanol tolerance, developed over 5 days, was sufficient to block a radiation-induced taste aversion, as well as an ethanol-induced CTA. Several intermittent doses of ethanol, which did not induce tolerance but removed the novelty of the conditioning stimulus, blocked an ethanol-induced CTA but not the radiation-induced CTA. A CTA induced by doses of radiation up to 500 rads was attenuated. These data suggest that radioprotection developing in association with ethanol tolerance is a result of a physiological response to the chronic presence of ethanol not to the ethanol itself

  7. Development of a three-dimensional radiation dosimetry system

    International Nuclear Information System (INIS)

    Bero, M.A.

    2001-12-01

    The direct non-destructive measurement of the radiation absorbed dose in three dimensions is considered to be technically difficult. Accurate determination of the spatial distribution of absorbed dose plays an important role in many applications particularly in medicine. In radiotherapy computer calculations are frequently used to estimate three-dimensional dose distributions in complex geometry, hence a practical dosimetry system able to provide three-dimensional (3-D) integrated measurements is highly desirable for verifying such dose predictions. Magnetic Resonance Imaging (MRI) has been used to visualise 3-D dose distributions, inside two different detector materials, namely the ferrous sulphate gel (Fricke gel) and the polymer gel system. Each of these procedures has its own drawbacks and limitations, and this research project sought to find improvements and alternatives to overcome these problems. Work on the Fricke gel led to an improved preparation procedure employing gelatin gel whose lower melting point reduces the possibility of dissolved oxygen loss. The role of each component was clarified which led to the omission of all unnecessary chemicals such as the sodium chloride and benzoic acid. Initially MRI was the only 3-D readout technique available, however simple relaxometry was used to characterise the detector quantitatively with each modification before employing an MRI scanner to obtain images. Optimisation of the active constituents saves time and effort, and minimises the cost of equipment as well as materials. A serious drawback of the Fricke gel is ion diffusion, which causes blurring of the recorded spatial distribution and much effort was given to attempts to reduce this. However it was concluded that it is possible to slow down ion diffusion but at the cost of detector sensitivity. Therefore the best way of dealing with this problem is by introducing a fast readout technique so that the dose distribution can be recorded before serious

  8. Development of radiation fusion technology with food technology by the application of high dose irradiation

    International Nuclear Information System (INIS)

    Lee, Juwoon; Kim, Jaehun; Choi, Jongil

    2012-04-01

    This study was performed to achieve stable food supply and food safety with radiation fusion technology as a preparation for food weaponization. Results at current stage are following: First, for the development of radiation and food engineering fusion technology using high dose irradiation, the effects of high dose irradiation on food components were evaluated. The combination treatment of irradiation with food engineering was developed. Irradiation condition to destroy radiation resistant foodborne bacteria were determined. Second, for the development of E-beam irradiation technology, the effects of radiation sources on food compounds, processing conditions, and food quality of final products were compared. Food processing conditions for agricultural/aquatic products with different radiation sources was developed and the domination of E-beam irradiation foods were determined. The physical marker for E-beam irradiated foods or not was developed. Third, for the fundamental researches to develop purposed foods to extreme environmental, ready-to-eat foods were developed using high dose irradiation. Food processing for export strategy foods such as process ginseng were developed. Food processing with irradiation to destroy mycotoxin and to inhibit production of mycotoxin was developed. Mathematical models to predict necessary irradiation doses and radiation sources were developed and validated. Through the fundamental researches, the legislation for irradiation approval on meat products, sea foods and dried sea foods, and use of E-beam was introduced. Results from this research project, the followings are expected. Improvement of customer acceptance and activation of irradiation technology by the use of various irradiation rays. Increase of indirect food productivity, and decrease of SOC and improvement of public health by prevention of foodborne outbreaks. Build of SPS/TBT system against imported products and acceleration of domestic product export. Systemized

  9. Development of Radiation Fusion Technology with Food Technology by the Application of High Dose Irradiation

    International Nuclear Information System (INIS)

    Kim, Ju Won; Kim, Jae Hun; Choi, Jong Il

    2010-04-01

    This study was studied to achieve stable food supply and food safety with radiation fusion technology as a preparation for food weaponization. Results at current stage are following: First, for the development of radiation and food engineering fusion technology using high dose irradiation, the effects of high dose irradiation on food components were evaluated. The combination treatment of irradiation with food engineering were developed. Irradiation condition to destroy radiation resistant food borne bacteria were determined. Second, for the development of E-beam irradiation technology, the effects of radiation sources on food compounds, processing conditions, and food quality of final products were compared. Food processing conditions for agricultural/aquatic products with different radiation sources were developed and the domination of E-beam irradiation foods were determined. The physical marker for E-beam irradiated foods or not were developed. Third, for the fundamental researches to develop purposed foods to extreme environmental, ready-to-eat foods were developed using high dose irradiation. Food processing for export strategy foods such as process ginseng were developed. Food processing with irradiation to destroy mycotoxin and to inhibit production of mycotoxin were developed. Mathematical models to predict necessary irradiation doses and radiation sources were developed and validated. Through the fundamental researches, the legislation for irradiation approval on meat products, sea foods and dried sea foods, and use of E-beam were introduced. Results from this research project, the followings are expected. (1) Improvement of customer acceptance and activation of irradiation technology by the use of various irradiation rays. (2) Increase of indirect food productivity, and decrease of SOC and improvement of public health by prevention of food borne outbreaks. (3) Build of SPS/TBT system against imported products and acceleration of domestic product export

  10. Development of Radiation Fusion Technology with Food Technology by the Application of High Dose Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ju Won; Kim, Jae Hun; Choi, Jong Il

    2010-04-15

    This study was studied to achieve stable food supply and food safety with radiation fusion technology as a preparation for food weaponization. Results at current stage are following: First, for the development of radiation and food engineering fusion technology using high dose irradiation, the effects of high dose irradiation on food components were evaluated. The combination treatment of irradiation with food engineering were developed. Irradiation condition to destroy radiation resistant food borne bacteria were determined. Second, for the development of E-beam irradiation technology, the effects of radiation sources on food compounds, processing conditions, and food quality of final products were compared. Food processing conditions for agricultural/aquatic products with different radiation sources were developed and the domination of E-beam irradiation foods were determined. The physical marker for E-beam irradiated foods or not were developed. Third, for the fundamental researches to develop purposed foods to extreme environmental, ready-to-eat foods were developed using high dose irradiation. Food processing for export strategy foods such as process ginseng were developed. Food processing with irradiation to destroy mycotoxin and to inhibit production of mycotoxin were developed. Mathematical models to predict necessary irradiation doses and radiation sources were developed and validated. Through the fundamental researches, the legislation for irradiation approval on meat products, sea foods and dried sea foods, and use of E-beam were introduced. Results from this research project, the followings are expected. (1) Improvement of customer acceptance and activation of irradiation technology by the use of various irradiation rays. (2) Increase of indirect food productivity, and decrease of SOC and improvement of public health by prevention of food borne outbreaks. (3) Build of SPS/TBT system against imported products and acceleration of domestic product export

  11. Development of radiation fusion technology with food technology by the application of high dose irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Juwoon; Kim, Jaehun; Choi, Jongil; and others

    2012-04-15

    This study was performed to achieve stable food supply and food safety with radiation fusion technology as a preparation for food weaponization. Results at current stage are following: First, for the development of radiation and food engineering fusion technology using high dose irradiation, the effects of high dose irradiation on food components were evaluated. The combination treatment of irradiation with food engineering was developed. Irradiation condition to destroy radiation resistant foodborne bacteria were determined. Second, for the development of E-beam irradiation technology, the effects of radiation sources on food compounds, processing conditions, and food quality of final products were compared. Food processing conditions for agricultural/aquatic products with different radiation sources was developed and the domination of E-beam irradiation foods were determined. The physical marker for E-beam irradiated foods or not was developed. Third, for the fundamental researches to develop purposed foods to extreme environmental, ready-to-eat foods were developed using high dose irradiation. Food processing for export strategy foods such as process ginseng were developed. Food processing with irradiation to destroy mycotoxin and to inhibit production of mycotoxin was developed. Mathematical models to predict necessary irradiation doses and radiation sources were developed and validated. Through the fundamental researches, the legislation for irradiation approval on meat products, sea foods and dried sea foods, and use of E-beam was introduced. Results from this research project, the followings are expected. Improvement of customer acceptance and activation of irradiation technology by the use of various irradiation rays. Increase of indirect food productivity, and decrease of SOC and improvement of public health by prevention of foodborne outbreaks. Build of SPS/TBT system against imported products and acceleration of domestic product export. Systemized

  12. Development of quality assurance procedures for production of sealed radiation source

    CERN Document Server

    Nam, J H; Cho, W K; Han, H S; Hong, S B; Kim, K H; Kim, S D; Lee, Y G; Lim, N J

    2001-01-01

    The quality assurance procedures for sealed radiation sources production using HANARO and RIPF have been developed. The detailed quality assurance procedures are essential to manage the whole work process effectively and ensure the quality of the produced sealed sources. Through applying this quality assurance procedures to the entire production works of the sealed radiation sources, it is expected that the quality of the products, the safety of the works and the satisfaction of the customers will be increased.

  13. Effects of CO-60 gamma radiation on the embryonary development of Biomphalaria Glabrata (Say, 1818)

    International Nuclear Information System (INIS)

    Okazaki, K.

    1988-01-01

    Some aspects of the effects of the ionizing radiation on the embryo and on the genetical material of Biomphalaria glabrata (Mollusca: Gastropoda) are presented. The embryos weresubmitted at various stages of development to doses of 5,10,15,20 and 25 Gy of Co-60 gamma radiation. As a criteia of evaluation of the embryos radiosensitivity, four biological parameters were used: mortality, malformation, hatching and chromossomal aberrations. (M.A.C.) [pt

  14. Recent results on the development of radiation-hard diamond detectors

    CERN Document Server

    Conway, J S; Bauer, C; Berdermann, E; Bergonzo, P; Bogani, F; Borchi, E; Brambilla, A; Bruzzi, Mara; Colledani, C; Dabrowski, W; Da Graca, J; Delpierre, P A; Deneuville, A; Dulinski, W; van Eijk, B; Fallou, A; Fizzotti, F; Foulon, F; Friedl, M; Gan, K K; Gheeraert, E; Grigoriev, E; Hallewell, G D; Hall-Wilton, R; Han, S; Hartjes, F G; Hrubec, Josef; Husson, D; Jamieson, D; Kagan, H; Kania, D R; Kaplon, J; Karl, C; Kass, R; Knöpfle, K T; Krammer, Manfred; Lo Giudice, A; Lü, R; Manfredi, P F; Manfredotti, C; Marshall, R D; Meier, D; Mishina, M; Oh, A; Pan, L S; Palmieri, V G; Pernicka, Manfred; Peitz, A; Pirollo, S; Plano, R; Polesello, P; Prawer, S; Pretzl, Klaus P; Procario, M; Re, V; Riester, J L; Roe, S; Roff, D G; Rudge, A; Russ, J; Schnetzer, S; Sciortino, S; Somalwar, S V; Speziali, V; Stelzer, H; Stone, R; Suter, B; Tapper, R J; Tesarek, R; Thomson, G B; Trawick, M; Trischuk, W; Vittone, E; Walsh, A M; Wedenig, R; Weilhammer, Peter; White, C; Ziock, H J; Zöller, M

    1999-01-01

    Charged particle detectors made from chemical vapor deposition (CVD) diamond have radiation hardness greatly exceeding that of silicon- based detectors. The CERN-based RD42 Collaboration has developed and tested CVD diamond microstrip and pixel detectors with an eye to their application in the intense radiation environment near the interaction region of hadron colliders. This paper presents recent results from tests of these detectors. (4 refs).

  15. Radiation monitoring and measuring instrument developed by Turkish Atomic Energy Authority

    International Nuclear Information System (INIS)

    Kuecuekarslan, N.; Gueven, A.

    2001-01-01

    Turkish Atomic Energy Authority (TAEA), Cekmece Nuclear Research and Training Center, Nuclear Electronics Department is working on research, development and production of radiation monitoring and measuring instruments in the aims of TAEA to serve our Country. Advanced micro controller technology is used to cover problems of radiation measurement. Control by micro controller enables reliable, stable measurement and display of low level dose rate fields. It makes possible the simultaneous measurement of both dose and dose rate values

  16. 1 Gb Radiation Hardened Nonvolatile Memory Development, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The objective of this effort is to identify, characterize and develop advanced semiconductor materials and fabrication process techniques, and design and produce a...

  17. Development of Instrumental ORAM System for Radiation Dosimetry

    International Nuclear Information System (INIS)

    Bogard, J.S.; Cullum, B.M.; Mobley, J.; Moscovitch, M.; Vo-Dinh, T.

    1999-01-01

    The development of an optical-based dosimeter for neutrons and heavy charged particles is described. It is based on the use of three dimensional (3-D) optical memory materials, used in optical computing applications, and multiphoton fluorescence of photochromic dyes. Development and characterization of various types of dosimeter materials are described as well as the optical readout system. In addition, various excitation geometries for ''reading'' and ''writing'' to the optical memories are also discussed

  18. Development of an audiovisual teaching material for radiation management education of licenceholders

    International Nuclear Information System (INIS)

    Chae, Sung Ki; Park, Tai Jin; Lim, Ki Joong; Jung, Ho Sup; Jun, Sung Youp; Kim, Jung Keun; Heo, Pil Jong; Jang, Han Ki

    2007-02-01

    This study aims at developing an audiovisual teaching material for elevating their abilities for radiation management during the legal education of the licenceholder about radiation and radioisotope. It also aims at developing an educational video material for the RSO in radiation safety management and RI handing. The role or duty, which was needed for the activities of the regulation and management in real fields, of the licenceholder was introduced by referring the medical field and the audiovisual teaching material was then developed by presenting the examples of management in real fields. The procedures of management were analyzed by reflecting the working tables of the supervisors for radiation management in the licensed companies, the working list was divided into the main subjects of 10 and the each main subject was then also divided into the detailed subjects of 103. Based on the detailed subjects, the points of sameness and difference for the management in the educational, researching and medical fields were analyzed and the content of the material was then determined according to the points of sameness and difference. In addition, the material emphasized the effect resulted in the actual education as compared with the existing audiovisual materials. The contents of the material are as follows : regulation of radiation safety, duty of radiation safety management - management of working members, management of facilities, management of sources

  19. Development of an audiovisual teaching material for radiation management education of licenceholders

    Energy Technology Data Exchange (ETDEWEB)

    Chae, Sung Ki; Park, Tai Jin; Lim, Ki Joong; Jung, Ho Sup; Jun, Sung Youp; Kim, Jung Keun; Heo, Pil Jong [Korea Institute of