Vehicle electrification. Quo vadis?

Energy Technology Data Exchange (ETDEWEB)

Brinkman, N. [GM Global Research and Development, Warren, MI (United States); Eberle, U.; Formanski, V.; Grebe, U.D.; Matthe, R. [General Motors Europe, Ruesselsheim (Germany)

2012-11-01

This publication describes the development of electrified propulsion systems from the invention of the automobile to the present and then provides an outlook on expected technology progress. Vehicle application areas for the various systems are identified based on a range of energy supply chains and the technological limits of electric powertrain components. GM anticipates that vehicle electrification will increase in the future. Battery-electric vehicles will become competitive for some applications, especially intra-urban, short-distance driving. Range-extended electric vehicles provide longer driving range and offer full capability; with this technology, electric vehicles can serve as the prime vehicle for many customers. Hydrogen-powered fuel cell-electric powertrains have potential for application across most of the vehicle segments. They produce zero emissions during all phases of operation, offer short refueling times, but have powertrain cooling and hydrogen storage packaging constraints. While the market share of electrified vehicles is expected to increase significantly, GM expects conventional powertrains with internal combustion engines to also have a long future - however, a lot of them will be supported by various levels of electrification. (orig.)

Aburra Valley: Quo vadis?

International Nuclear Information System (INIS)

Hermelin, Michel

2008-01-01

These paper intents a brief description of the evolution that characterised natural risk prevention in the area surrounding the city of Medellin, Colombia, called the Aburra Valley. Both the lithological and structural composition of the Valle and its topographic and climatic conditions contribute to the abundance of destructive natural phenomena as earthquakes, slope movements, flash floods and, in a lower proportion, to floods. The population increase, which reaches now 3.5 millions inhabitants and the frequent occupation of sites exposed to natural hazards have resulted in numerous disasters. At present two entities called SIMPAD and DAPARD work on risk prevention, on city and department scale respectively. The amount of knowledge about physical environment is considered to be insufficient, together with regulations which should direct land use in accordance to restrictions related to natural hazards. Several seminars on this topic have already been carried out and the organisers of the present one, destined to commemorate the twentieth anniversary of the Villatina disaster, should make the decision to meet each two years. Furthermore, the creation of a permanent commission dedicated to study past events, to foster information broadcasting and to seek a better knowledge of the Aburra Valley, should be considered

North Korea, Quo Vadis?

Directory of Open Access Journals (Sweden)

Karl H. Stingeder

2014-03-01

Full Text Available North Korean politics appears neither irrational nor unpredictable: the logic of its actions may at first seem opaque, but it nonetheless displays its own rationale and patterns. – North Korea: a ruthless political actor, now under the leadership of Kim Jong-Un who inherited the regime’s leadership from his father and "Supreme Leader", Kim Jong-Il, in 2011. The country’s policy is based on its ongoing political agenda of (nuclear brinkmanship, a true threat to the world – or at least that's how the Western hemisphere sees it. Yet our factual knowledge of this post-Leninist and totalitarian regime is extremely limited and relatively distorted; it is largely circumstantial evidence and judgmental speculation that accounts for our perception of this East Asian state. Northeast Asia (China, Japan, South and North Korea, Taiwan is a region dominated by the legacy of the Cold War. The North Korean leadership has indeed established its priorities, primarily its isolationist orientation, but in the long term the regime cannot survive without external stimulus. Most importantly, even in a long-term, non-violent and gradual transformation of North Korea considerable danger can ultimately result in the demise of the regime. Apart from few signs of a North Korean "civil society", currently only the army might have the resources to see through a regime change. In the meantime, the strategies of isolationism as well as tight control of the media remain as fundamental cornerstones of the regime. A close-knit network of social control has been established and access to the internet for the most part is limited to the regime’s entrusted cadre.

Quo Vadis, Artificial Intelligence?

OpenAIRE

Berrar, Daniel; Sato, Naoyuki; Schuster, Alfons

2010-01-01

Since its conception in the mid 1950s, artificial intelligence with its great ambition to understand and emulate intelligence in natural and artificial environments alike is now a truly multidisciplinary field that reaches out and is inspired by a great diversity of other fields. Rapid advances in research and technology in various fields have created environments into which artificial intelligence could embed itself naturally and comfortably. Neuroscience with its desire to understand nervou...

Binaural Interference: Quo Vadis?

Science.gov (United States)

Jerger, James; Silman, Shlomo; Silverman, Carol; Emmer, Michele

2017-04-01

The reality of the phenomenon of binaural interference with speech recognition has been debated for two decades. Research has taken one of two avenues; group studies or case reports. In group studies, a sample of the elderly population is tested on speech recognition under three conditions; binaural, monaural right and monaural left. The aim is to determine the percent of the sample in which the expected outcome (binaural score-better-than-either-monaural score) is reversed (i.e., one of the monaural scores is better than the binaural score). This outcome has been commonly used to define binaural interference. The object of group studies is to answer the "how many" question, what is the prevalence of binaural interference in the sample. In case reports the binaural interference conclusion suggested by the speech recognition tests is not accepted until it has been corroborated by other independent diagnostic audiological measures. The aim is to attempt to determine the basis for the findings, to answer the "why" question. This article is at once tutorial, editorial and a case report. We argue that it is time to accept the reality of the phenomenon of binaural interference, to eschew group statistical approaches in search of an answer to the "how many" question, and to focus on individual case reports in search of an answer to the "why" question. American Academy of Audiology.

Quo vadis, personnel monitoring

International Nuclear Information System (INIS)

Becker, K.

1975-01-01

With the increasing use of nuclear power and radiation sources, the selection of optimum systems for personnel monitoring is becoming a matter of worldwide concern. The present status of personnel dosimetry, sometimes characterized by unstable and inaccurate detectors and oversimplified interpretation of the results, leaves much to be desired. In particular, photographic film, although having certain advantages with regard to economics and information content, undergoes rapid changes in warm and humid climates. Careful sealing reduces, but does not prevent, these problems. The replacement of film by solid-state dosimeters, primarily thermoluminescence dosimeters, is in progress or being considered by an increasing number of institutions and requires a number of decisions concerning the choice of the optimum detector(s), badge design, and evaluation system; organizational matters, such as the desirability of automation and computerized bookkeeping; etc. The change also implies the potential use of such advanced concepts as different detectors and monitoring periods for the large number of low-risk persons and the small number of high-risk radiation workers. (auth)

Water Storage: Quo Vadis?

Science.gov (United States)

Smakhtin, V.

2017-12-01

Humans stored water - in various forms - for ages, coping with water resources variability, and its extremes - floods and droughts. Storage per capita, and other storage-related indicators, have essentially become one way of reflecting the progress of economic development. Massive investments went into large surface water reservoirs that have become the characteristic feature of the earth's landscapes, bringing both benefits and controversy. As water variability progressively increases with changing climate, globally, on one hand, and the idea of sustainable development receives strong traction, on another - it may be worth the while to comprehensively examine current trends and future prospects for water storage development. The task is surely big, to say the least. The presentation will aim to initiate a structured discussion on this multi-facet issue and identify which aspects and trends of water storage development may be most important in the context of Sustainable Development Goals, Sendai Framework for Disaster Risk Reduction, Paris Agreement on Climate Change, and examine how, where and to what extent water storage planning can be improved. It will cover questions like i) aging of large water storage infrastructure, the current extent of this trend in various geographical regions, and possible impacts on water security and security of nations; ii) improved water storage development planning overall in the context of various water development alternatives and storage options themselves and well as their combinations iii) prospects for another "storage revolution" - speed increase in dam numbers, and where, if at all this is most likely iv) recent events in storage development, e.g. is dam decommissioning a trend that picks pace, or whether some developing economies in Asia can do without going through the period of water storage construction, with alternatives, or suggestions for alleviation of negative impacts v) the role of subsurface storage as an alternative to large surface dams, and vi) the role of nature based solutions in large storage development and overall storage functioning and management - to mention some. The presentation will call for coordinated effort that will help with environmentally and economically sound strategies of future storage development in national water planning.

Quo Vadis, Medical Genetics?

Science.gov (United States)

Czeizel, Andrew E.

The beginning of human genetics and its medical part: medical genetics was promising in the early decades of this century. Many genetic diseases and defects with Mendelian origin were identified and it helped families with significant genetic burden to limit their child number. Unfortunately this good start was shadowed by two tragic events. On the one hand, in the 1930s and early 1940s the German fascism brought about the dominance of an unscientific eugenics to mask vile political crimes. People with genetic diseases-defects were forced to sterilisation and several of them were killed. On the other hand, in the 1950s lysenkoism inhibitied the evolution of genetics in the Soviet Union and their satelite countries. Lysenko's doctrine declared genetics as a product of imperialism and a guilty science, therefore leading geneticists were ousted form their posts and some of them were executed or put in prison. Past decades genetics has resulted fantastic new results and achieved a leading position within the natural sciences. To my mind, however, the expected wider use of new eugenics indicates a new tragedy and this Cassandra's prediction is the topic of this presentation.

“Quo Vadis Infotainment”?

Directory of Open Access Journals (Sweden)

Dadi Ahmadi

2008-06-01

Full Text Available According to Marshall McLuhan, the world has become a global village where modern communication media opened up unlimited interactions among people all over the world. Among other things, mass communication channel has rapidly developed, allowing greater mass of information transmissions to be spread for all members of society in no time. Unfortunately, the rapid development of mass media was not followed by better quality in terms of media content. Infotainments were everywhere, offering latest report concerning celebrity news in detail, and raising serious questions concerning ethics, privacy, public policy, and news quality today.

Quo vadis, Intelligent Machine?

Directory of Open Access Journals (Sweden)

Rosemarie Velik

2010-09-01

Full Text Available Artificial Intelligence (AI is a branch of computer science concerned with making computers behave like humans. At least this was the original idea. However, it turned out that this is no task easy to be solved. This article aims to give a comprehensible review on the last 60 years of artificial intelligence taking a philosophical viewpoint. It is outlined what happened so far in AI, what is currently going on in this research area, and what can be expected in future. The goal is to mediate an understanding for the developments and changes in thinking in course of time about how to achieve machine intelligence. The clear message is that AI has to join forces with neuroscience and other brain disciplines in order to make a step towards the development of truly intelligent machines.

Pacific Studies: Quo Vadis?

Directory of Open Access Journals (Sweden)

Anne Holden Rønning

2014-02-01

Full Text Available Looking back to the past this paper discusses why Pacific studies and in particular Australasian studies became an area of interest in tertiary education in Europe. What subject areas initiated these studies, and how do past legacies shape the present? With cutbacks in higher education over the past two decades the future of interdisciplinary studies and the humanities looks bleak. At the same time due to global business and increased political communication across borders there is a vibrant interest in and need for such studies among businesses and students. For most Europeans the literature of settler countries, with their European legacy, makes access to ways of thought and culture easier than studies of countries with other mythological backgrounds. In today’s multicultural environment such studies can provide knowledge for an understanding of other cultures and increase tolerance of the ‘other’. Area studies have relevance to our situation in Europe with increased migrancy, not least as a result of Schengen and EU regulations.

Quo Vadis Quantum Mechanics?

CERN Document Server

Dolev, S; Kolenda, N

2005-01-01

For more than a century, quantum mechanics has served as a very powerful theory that has expanded physics and technology far beyond their classical limits, yet it has also produced some of the most difficult paradoxes known to the human mind. This book represents the combined efforts of sixteen of today's most eminent theoretical physicists to lay out future directions for quantum physics. The authors include Yakir Aharonov, Anton Zeilinger; the Nobel laureates Anthony Leggett and Geradus 't Hooft; Basil Hiley, Lee Smolin and Henry Stapp. Following a foreword by Roger Penrose, the individual chapters address questions such as quantum non-locality, the measurement problem, quantum insights into relativity, cosmology and thermodynamics, and the possible bearing of quantum phenomena on biology and consciousness.

BEPS: quo vadis Nederland?

NARCIS (Netherlands)

Cornelisse, R.P.C.

2015-01-01

Schrijver blikt vooruit op de ontwikkelingen die dit jaar in de fiscale wereld gaan plaatsvinden. Hij stelt de vraag aan de orde of Nederland de ontwikkelingen op dit terrein moet afwachten of dat het verstandiger is juist niet af te wachten maar pro-actief haar fiscale stelsel op korte termijn

Metabolic surgery: quo vadis?

Science.gov (United States)

Ramos-Leví, Ana M; Rubio Herrera, Miguel A

2014-01-01

The impact of bariatric surgery beyond its effect on weight loss has entailed a change in the way of regarding it. The term metabolic surgery has become more popular to designate those interventions that aim at resolving diseases that have been traditionally considered as of exclusive medical management, such as type 2 diabetes mellitus (T2D). Recommendations for metabolic surgery have been largely addressed and discussed in worldwide meetings, but no definitive consensus has been reached yet. Rates of diabetes remission after metabolic surgery have been one of the most debated hot topics, with heterogeneity being a current concern. This review aims to identify and clarify controversies regarding metabolic surgery, by focusing on a critical analysis of T2D remission rates achieved with different bariatric procedures, and using different criteria for its definition. Indications for metabolic surgery for patients with T2D who are not morbidly obese are also discussed. Copyright © 2013 SEEN. Published by Elsevier Espana. All rights reserved.

Mobille Business, Quo Vadis?

Directory of Open Access Journals (Sweden)

Robert Hudec

2004-01-01

Full Text Available This paper deals with present state of mobile segment of e-commerce and its future trends. In present days, each company, which would like to be successful on the global market, must implement ICT (Information and Communication Technology to its internal relations, business processes and transactions. The aim of the e-commerce is to forward market development by using ICT, because it radically changes the way of organizations/companies function in all its relations. Mcommerce is a part of e-commerce realized by mobile ICT. Its great advantage is in high penetration of mobile phones and other mobile access devices. Technologies, services and security of actual m-business and expected trends of this segment in near future are analyzed step by step in this paper.

Laser Propulsion - Quo Vadis

International Nuclear Information System (INIS)

Bohn, Willy L.

2008-01-01

First, an introductory overview of the different types of laser propulsion techniques will be given and illustrated by some historical examples. Second, laser devices available for basic experiments will be reviewed ranging from low power lasers sources to inertial confinement laser facilities. Subsequently, a status of work will show the impasse in which the laser propulsion community is currently engaged. Revisiting the basic relations leads to new avenues in ablative and direct laser propulsion for ground based and space based applications. Hereby, special attention will be devoted to the impact of emerging ultra-short pulse lasers on the coupling coefficient and specific impulse. In particular, laser sources and laser propulsion techniques will be tested in microgravity environment. A novel approach to debris removal will be discussed with respect to the Satellite Laser Ranging (SRL) facilities. Finally, some non technical issues will be raised aimed at the future prospects of laser propulsion in the international community

Military Governorship as a Solution to the Insurgency Problem in Southern Philippines

Science.gov (United States)

2012-03-01

Governor Al Rasheed Sakalahul would go on further in quipping that “only goats report to the Municipal Hall” in Basilan.67 To curb this problem, the...comprehensive discussion of the MOA-AD see Fr. Eliseo Mercado OMI, “MOA-AD: Quo Vadis,” Autonomy and Peace Review 4, no. 3 (2008): 9 – 20, accessed...documents/ADRRN_ChallengesTo HumanSecurityInComplexSituations_TheCaseOfConflictInTheSouthernPhilippin es.pdf Mercado OMI, Fr. Eliseo. “MOA-AD: Quo

Quo Vadis “Europa Verde”? - A Política de Ambiente da União Europeia e o Combate às Alterações Climáticas

Directory of Open Access Journals (Sweden)

Amparo Sereno

2018-05-01

Full Text Available A Política de Ambiente da União Europeia é hoje uma das mais avançadas a nível mundial, o que se corresponde com uma legislação muito rica e inovadora sobre os vários sectores ambientais: a água, o meio marinho, a biodiversidade ou os resíduos e a denominada «economia circular», entre outras muitas áreas. Porém, a União Europeia destacou-se, sobretudo, a nível internacional, pelo combate convicto contra o aquecimento do planeta. A União tem-se tornado, sucessivamente, na grande impulsionadora de acordos internacionais sobre alterações climáticas, quer pelo seu papel ativo nas negociações, quer pelo seu empenho na definição de um modelo de economia sustentável. No entanto, só a partir da COP 15, realizada em 2009 na Copenhaga, a doutrina começou a refletir sobre as razões dos sucessos e insucessos da União nesta matéria. No presente artigo, estudam-se as causas que levaram à União Europeia a tornar-se num líder nas negociações sobre alterações climáticas, desde o Protocolo de Quioto (1997, passando pelo fracasso de Copenhaga (2009, até Paris (2015, e o “depois de Paris” até agora. | "Quo Vadis “Green Europe?” – An Environmental Policy of the European Union and the fight against climate change." The Environmental Policy of the European Union is today one of the most advanced in the world. It results in a very rich and innovative legislation on the various environmental sectors: water, marine environment, biodiversity or waste and the so-called circular economy, among many other areas. However, the European Union stood out, especially at the international level, for the strong fight against global warming. The Union has successively become the driving force behind international agreements on climate change, including its active role in negotiation and its contributions in the design of a model of sustainable economy. However, it was not until the COP 15 of Copenhagen (2009 when scholars studied the

Reducing status quo bias in choice experiments

DEFF Research Database (Denmark)

Bonnichsen, Ole; Ladenburg, Jacob

In stated preference literature, the tendency to choose the alternative representing the status quo situation seems to exceed real life status quo effects. Accordingly, status quo bias can be a problem. In Choice Experiments, status quo bias is found to be strongly correlated with protest attitudes...... toward the cost attribute. If economic values are to be elicited, this problem is difficult to remedy. In a split sample framework we test a novel ex-ante entreaty aimed specifically at the cost attribute and find that it effectively reduces status quo bias and improves the internal validity...

Singapore's Anatomical Future: Quo Vadis?

Science.gov (United States)

Ang, Eng-Tat; Sugand, Kapil; Hartman, Mikael; Seow, Choon-Sheong; Bay, Boon-Huat; Abrahams, Peter

2012-01-01

The disciplines of anatomy and surgery are not dichotomous since one is dependent on the other. Traditionally, surgeons predominantly taught gross and clinical anatomy. In this review, we examine the context of how human anatomy is taught nowadays. In essence, we discovered that there are certain discernable trends consistently observable between…

Grand unification: quo vadis domine

International Nuclear Information System (INIS)

Senjanovic, G.

1985-01-01

The present theoretical and experimental situation with grand unification is summarized. The issues of proton decay and the Weinberg angle are addressed, going through the predictions of both the standard SU(5) theory and its supersymmetric extension. The SO(10) theory, which provides a minimal one family model, is then studied. The gravitational characteristics of domain walls and strings are then discussed. It is argued that there is a need to go beyond SO(10) in order to incorporate a unified picture of families. This leads to the prediction of mirror fermions, whose physics is analyzed. 31 refs

Benchmark simulation models, quo vadis?

DEFF Research Database (Denmark)

Jeppsson, U.; Alex, J; Batstone, D. J.

2013-01-01

As the work of the IWA Task Group on Benchmarking of Control Strategies for wastewater treatment plants (WWTPs) is coming to an end, it is essential to disseminate the knowledge gained. For this reason, all authors of the IWA Scientific and Technical Report on benchmarking have come together to p...

The Brazil agreement - quo vadis

International Nuclear Information System (INIS)

Hossner, R.

1981-01-01

After an analysis of the power requirements of Brazil as well as of the options for covering these requirements an important nuclear power program for peaceful uses was decided. It is performed on the basis of a bilateral agreement between Brazil and the Federal Republic of Germany of 1975 by co-operation between the German and the Brazilian industry. German firms make their know-how available as well as experts for a limited period of time, in order to establish during about 20 years an independent Brazilian infrastructure for nuclear power plants and their requirements, and to realize the transfer of technology which at the same time shall transmit impulses to the industrial development of the country. (orig.) [de

The vestibular implant: Quo vadis?

Directory of Open Access Journals (Sweden)

Raymond eVan De Berg

2011-08-01

Full Text Available AbstractObjective: to assess the progress of the development of the vestibular implant and its feasibility short-term. Data sources: a search was performed in Pubmed, Medline and Embase. Key words used were vestibular prosth* and vestibular implant. The only search limit was language: English or Dutch. Additional sources were medical books, conference lectures and our personal experience with per-operative vestibular stimulation in patients selected for cochlear implantation.Study selection: all studies about the vestibular implant and related topics were included and evaluated by two reviewers. No study was excluded since every study investigated different aspects of the vestibular implant. Data extraction and synthesis: data was extracted by the first author from selected reports, supplemented by additional information, medical books conference lectures. Since each study had its own point of interest with its own outcomes, it was not possible to compare data of different studies. Conclusion: to use a basic vestibular implant in humans seems feasible in the very near future. Investigations show that electric stimulation of the canal nerves induces a nystagmus which corresponds to the plane of the canal which is innervated by the stimulated nerve branch. The brain is able to adapt to a higher baseline stimulation, while still reacting on a dynamic component. The best response will be achieved by a combination of the optimal stimulus (stimulus profile, stimulus location, precompensation, complemented by central vestibular adaptation. The degree of response will probably vary between individuals, depending on pathology and their ability to adapt.

Philippine population policy: quo vadis?

Science.gov (United States)

Carino, L V

1994-06-01

In the Philippines, debate engendered in 1994 by the introduction of a antiabortifacient bill written in such broad language that it would outlaw most contraceptives recalls earlier debates on population policy and shows that not much has changed on the surface: the US is still providing funds, the Catholic Church is still opposing program advocates, and the population is still growing. The history of family planning (FP) in the Philippines developed during five periods: 1) prior to 1969 FP was offered only by private organizations; 2) from 1969 to 1974, the government began to incorporate FP as a policy; 3) from 1974 to 1986, FP and population issues were considered part of total development; 4) from 1986-1992, FP was subsumed under maternal and child health; and 5) from 1992 to the present, policy was enacted to balance population concerns with resources and development. This newsletter considers the first two stages. The written code of one of the precolonization self-governing indigenous peoples linked the number of permitted wives to population size and limited (through infanticide) the number of children a poor couple could have. During the 1960s, the Ford Foundation created a Population Institute, a protestant group established a countrywide Planned Parenthood Movement, and a Catholic Family Planning Association was formed. The public sector became involved when the Health Department of Manila sponsored a training seminar on FP. During the second stage, President Marcos began increasingly to support a government policy facilitating FP. By 1970, FP was an announced policy of his government. The Population Commission was to suffer many administrative changes during the period, but the emphasis on fertility reduction remained within a basic framework of a policy which gave every couple the right to choose their method of FP. By the end of 1974, more than 20 organizations had become involved in FP and more than 2000 clinics provided services. (This survey is continued in the July 1994 issue of "People Count."

Quo vadis plant hormone analysis?

Czech Academy of Sciences Publication Activity Database

Tarkowská, Danuše; Novák, Ondřej; Floková, Kristýna; Tarkowski, P.; Turečková, Veronika; Grúz, Jiří; Rolčík, Jakub; Strnad, Miroslav

2014-01-01

Roč. 240, č. 1 (2014), s. 55-76 ISSN 0032-0935 R&D Projects: GA MŠk(CZ) LO1204 Institutional support: RVO:61389030 Keywords : Plant hormones * Extraction * Mass spectrometr Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 3.263, year: 2014

Benchmark simulation models, quo vadis?

Science.gov (United States)

Jeppsson, U; Alex, J; Batstone, D J; Benedetti, L; Comas, J; Copp, J B; Corominas, L; Flores-Alsina, X; Gernaey, K V; Nopens, I; Pons, M-N; Rodríguez-Roda, I; Rosen, C; Steyer, J-P; Vanrolleghem, P A; Volcke, E I P; Vrecko, D

2013-01-01

As the work of the IWA Task Group on Benchmarking of Control Strategies for wastewater treatment plants (WWTPs) is coming to an end, it is essential to disseminate the knowledge gained. For this reason, all authors of the IWA Scientific and Technical Report on benchmarking have come together to provide their insights, highlighting areas where knowledge may still be deficient and where new opportunities are emerging, and to propose potential avenues for future development and application of the general benchmarking framework and its associated tools. The paper focuses on the topics of temporal and spatial extension, process modifications within the WWTP, the realism of models, control strategy extensions and the potential for new evaluation tools within the existing benchmark system. We find that there are major opportunities for application within all of these areas, either from existing work already being done within the context of the benchmarking simulation models (BSMs) or applicable work in the wider literature. Of key importance is increasing capability, usability and transparency of the BSM package while avoiding unnecessary complexity.

Artificial Intelligence and Virology - quo vadis.

Science.gov (United States)

Shapshak, Paul; Somboonwit, Charurut; Sinnott, John T

2017-01-01

Artificial Intelligence (AI), robotics, co-robotics (cobots), quantum computers (QC), include surges of scientific endeavor to produce machines (mechanical and software) among numerous types and constructions that are accelerating progress to defeat infectious diseases. There is a plethora of additional applications and uses of these methodologies and technologies for the understanding of biomedicine through bioinformation discovery. Therefore, we briefly outline the use of such techniques in virology.

Quo vadis, Eesti linnaarheoloogia? / Erki Russow

Index Scriptorium Estoniae

Russow, Erki, 1974-

2012-01-01

Algselt pigem asjaarmastajate ning naaberdistsipliini teadlaste kasutatud tööviiside ja seadustega vähe reguleeritud õigusliku raamistiku asemel toimub tänane linnaarheoloogia üsna selgelt piiritletud tingimustes. Sarnaselt ülejäänud Euroopaga võib ka Eestis kõnelda linnaarheoloogia professionaliseerumisest : üldised mängureeglid on paika pandud ning suuri sisulisi muutusi tõenäoliselt oodata pole

VALLE DE ABURRÁ: ¿QUO VADIS?

Directory of Open Access Journals (Sweden)

Hermelin Michel

2008-07-01

Full Text Available Se da una descripción somera de la evolución que ha tenido la prevención de los riesgos de origen natural en el Valle de Aburrá . Tanto la naturaleza litológica y estructural del valle como sus condiciones topográficas y climáticas lo hacen propenso a la ocurrencia de fenómenos naturales como sismos, movimientos de vertiente, avenidas torrenciales y, en menor grado, inundaciones. El aumento de la población que es actualmente de 3.5 millones de habitantes y la frecuente ocupación de lugares expuestos a amenazas han resultado en numerosos desastres. En este momento funcionan para la prevención y atención de desastres entidades como el SIMPAD y el DAPARD, con responsabilidades municipales y departamentales respectivamente. El grado de conocimiento del entorno físico del valle se considera insuficiente, así como las reglamentaciones que deberían tener como consecuencias de un uso de la tierra más acorde con las restricciones naturales. Se han realizado ya varias reuniones acerca de la gestión de riesgos naturales en la zona y los organizadores de la de 2007, que conmemora el vigésimo aniversario de la catástrofe de Villa Tina, pueden tomar la decisión de llevarlas a cabo cada dos años. Asimismo proponen la creación de un grupo técnicocientífico permanente dispuesto a estudiar los eventos ocurridos, a fomentar la difusión de la información pertinente y en general a propender por un mejor conocimiento del Valle de Aburrá.

Quo Vadis „Living Human Treasures”?

Directory of Open Access Journals (Sweden)

Nicolae Lupu

2016-11-01

Full Text Available „Living Human Treasures” (LHT is a program supported by the United Nations Educational, Scientific and Cultural Organization (UNESCO. According to the Regulation of the Ministry of Culture in Bucharest, the title „Living Human Treasures” is the life contingency, personal and in transmissible. The person „must, simultaneously fulfill bearing, preserving and creating qualities of intangible heritage, be able to transmit traditional cultural models and be recognized as so by other LHT and the scientific community”. In six years, between 2010 and 2015 in Romania were granted 45 titles: half to craftsmen (weavers, carpenters, iconographers, furriers, builders of musical instruments, pottery etc. and half to performers of folklore (folk interpreter, rhapsodists, dancers etc.. Most distinctions, eight and seven, were awarded in Cluj and Alba county, followed by Brașov, Suceava county, each with five distinctions. Discussions are held about the possibilities of granting life annuity, following the model of athletes and some artists and writers. It is clear however that the title holders and their performance can be assimilated to tourism assets, as attractions of itself, transforming communities they belong to genuine tourist destinations. Furthermore, it would avoid the exhausting movements of artisans at the various trade fairs, being preferable to receive the audience in their personal household tranquility. A series of semi structured personal interviews with some LHT confirm this hypothesis. Strong promotion of those tourist destinations should no longer delay. At the central level it would require that the Tourism Authority take the „dossiers” for those LHT and promote them in a centralized manner, dedicating them an advertising brochure and a map.

Dosimetry of internal emitters - quo vadis?

International Nuclear Information System (INIS)

Reddy, A.R.; Nagaratnam, A.; Jain, S.C.; Gupta, M.M.; Mehta, S.C.

1999-01-01

The dosimetry of internally administered radiopharmaceuticals in nuclear medicine procedures using MIRD formalisms and dosimetry in the case of intakes of radionuclides and ICRP methodology for the purpose of radiological protection are well established working practices. It should, however, be remembered that dose or dose coefficients calculated refer to a reference individual, defined in terms of a mathematical phantom established on the basis of certain biokinetic reference parameters. The reference individual represents a typical caucasian adult of West Europe or North American origin. Recently, some attempts have been made to define a Reference Asian and a Reference Indian individual and to assess the effects of anatomical differences and changes in the biokinetics of radiopharmaceuticals and other radionuclides in these different reference individuals on the estimation of dose and dose coefficients in relation to the intake of internal radionuclides. The assessment of doses to the embryo/fetus due to intake of radionuclides by pregnant women, local dose estimates, microdosimetry, radiobiology and radiation protection aspects relating to Auger electron emitters represent other areas of active research in the area of dosimetry of internal emitters. The present review summarises these different aspects of work. (orig.) [de

Castro’s Cuba: Quo Vadis

Science.gov (United States)

2006-12-01

music, films, theater productions and cuisine ; performances by Cuban ballet dance troupes, musicians, and salsa bands in global venues; touring...by French authorities in 1994 in Sudan and is now serving a life sentence in France. See Aleksander Boyd, “An Overview on the Dynamics of Hugo

Ukrainian Hybrid War – Quo Vadis?

Directory of Open Access Journals (Sweden)

Rotărescu Carmen

2015-06-01

Full Text Available Although it is known for a long time, hybrid war taken place in Ukraine under the umbrella of Russian Federation surprised the whole world and produced the greatest worry for humankind’s fate since the World War II. The political and military analysts appreciate if the World War III does not come will at least follow a long time of a new cold war. Remembering the hybrid war is not declared, can be prolonged in time and the adversary is unknown, thus neither the aggressor state, it is hard to settle which are the countermeasures and how should be act when this clever adversary attacks you using hostile propaganda, to the limit of trick and war perfidy (the first is allowed as method of war, the latter is not, influences the political decision-makers by blackmail, military, economic and energetic deterrence or nuclear bombardments and undergoes subversive, clandestine actions and particularly it is hard to predict their consequences.

Marine Medicine : “Quo Vadis?”

Directory of Open Access Journals (Sweden)

V S Dixit

2015-01-01

Full Text Available Electronic gadgets along with mobile devices & Apps are becoming integral part of the modern healthcare industry. PACS and RIS were just the building blocks in the era of m Health, which now thrives on enterprise viewers and technologies like mobile e- visit technology to name a few. With gradual increase in quality and availability ofthe technology the concept of traditional health center is getting outdated. Today in the technology driven society the patient wants at door health services with mobile key boards as means of communication with his healthcare providers.

Eesti usukeel - quo vadis? / Siret Rutiku

Index Scriptorium Estoniae

Rutiku, Siret

2003-01-01

Ülevaade Eesti Teadusfondi Grandi nr 5292 Teoloogilise ja religioosse sõnavara struktuur ja areng eesti keeles eesmärkidest ja selle raames valmiva arvutipõhise terminibaasi loomisest ja süstematiseerimisest

Quo Vadis? The Future of Psychoanalysis.

Science.gov (United States)

Cortina, Mauricio

2016-12-01

Although contemporary psychoanalysis is split into different schools and traditions, there is growing support for some of the main tenets of contemporary psychodynamic thinking from attachment theory, infant research, developmental psychopathology, new models of motivation, the neuroscience of emotions and emotional regulation, and the discovery of different implicit and explicit memory systems. These tenets, which psychodynamic clinicians of all stripes encounter in their daily work with clients, are the following: (1) that large footprints are left over from infancy and childhood which involved insensitive, intrusive, frightening, or shaming care; (2) the carryover of these relational experiences into adulthood are expressed as unconscious expectations and attributions we make of others (transference and countertransference; (3) defensive processes and emotional regulation and deregulatory patterns develop to cope with these unhealthy relations. Many findings from infant research, attachment theory, and new models of motivation and neuroscience have developed alongside the intersubjective and relational turn in psychoanalysis in the last sixty years. To different degrees this new developmental science has been incorporated into the relational field. This essay is a plea to incorporate this new science in the teaching of psychodynamic psychotherapy in order to create a dialogue among different relational and intersubjective traditions in psychoanalysis that could reduce the splintering and support efforts toward integration.

Quo Vadis Saskatchewan? Prospects to 2010

International Nuclear Information System (INIS)

Halabura, S.P.

2003-01-01

This presentation outlined the driving forces for Saskatchewan's upstream petroleum industry in terms of geology, technology and product price. The future direction of exploration and production was also explored. A timeline graph indicating oil and gas discoveries in the province from 1950 to 2000 was included along with graphs depicting the number of wells and prices. It was shown that the mass application of horizontal drilling technology resulted in an increase in production and a decrease in the price of well drilling. A timeline graph was also included to demonstrate the influence that different political regimes had on exploration and production. The hydrocarbon resource base in Saskatchewan is as follows: in the southeast, oil is found in carbonate rocks; in the southwest, oil and gas is found in sands and shales; and, in west-central Saskatchewan, heavy oil and gas is found in sands. The major basins include the Midale, Frobisher, Tilston, Madison, Shaunavon, Centaur, Roseray, White Specks, Mannville, Viking, and Bakken. Gas production prior to deregulation in 1985 was 12 per cent of the daily energy production. Gas production in 2002 was 25 per cent of the daily energy production. The future development potential for oil resources in the province lies in the deep Paleozoic carbonates. Huge original oil in place (OOIP) with low recovery rates offers great potential. The new tools and techniques that promote exploration include sequence stratigraphy applied to Paleozoic carbonates, seismic amplitude mapping, digital log analysis, diversifying carbon dioxide technology, gas liquefaction, and advanced reservoir characterization. 18 figs

Quo vadis, emakeeleõpetus? / Raivo Juurak

Index Scriptorium Estoniae

Juurak, Raivo

2006-01-01

Ülevaade TLÜ-s toimunud Emakeeleõpetuse Infokeskuse teabepäevast, kus osalesid eesti keele ja kirjanduse õpetajad ning TLÜ keele- ja kirjandusteadlased. Lähemalt Rocca al Mare õpetaja J. Vaiksoo, TLÜ dotsendi K. Kerge ja Haridus- ja Teadusministeeriumi nõuniku J. Valge sõnavõttudest

Quo vadis klaasvitriin spoilerelamu / Risto Kozer

Index Scriptorium Estoniae

Kozer, Risto

2009-01-01

2008. a. valminud korterelamu Tallinnas Koidu 60-62 / Komeedi 14. Arhitektuur: Rein Murula Arhitektuuribüroo OÜ. Ehitaja: Rand & Tuulberg ja OÜ Dobrimir. Kortereid: 54. Arendusprojekt koosneb kahest erinevast elamuplokist, siduvaks jooneks on ühise tasandiga parkimiskorrus. Fassaadiviimistlusena on kasutatud tumedat tellist, rohelist valtsplekki ja rõdude juures klaasvitriine

eHealth literacy research-Quo vadis?

Science.gov (United States)

Griebel, Lena; Enwald, Heidi; Gilstad, Heidi; Pohl, Anna-Lena; Moreland, Julia; Sedlmayr, Martin

2017-10-18

The concept of electronic health (eHealth) literacy evolved from the social and information sciences and describes competencies necessary to use electronic health services. As it is a rather new topic, and as there is no current overview of the state of the art in research, it is not possible to identify research gaps. Therefore, the objective of this viewpoint article is to increase knowledge on the current state of the art of research in eHealth literacy and to identify gaps in scientific research which should be focused on by the research community in the future. The article provides a current viewpoint of the concept of eHealth literacy and related research. Gaps can be found in terms of a missing "gold standard" regarding both the definition and the measurement of eHealth literacy. Furthermore, there is a need for identifying the implications on eHealth developers, which evolve from the measurement of eHealth literacy in eHealth users. Finally, a stronger inclusion of health professionals, both in the evolving concept and in the measurement of eHealth literacy, is needed in the future.

Uno scenario da film: la "Mostra del Lazio" di Armando Brasini

Directory of Open Access Journals (Sweden)

Roscini Vitali, Aurora

2015-10-01

Full Text Available La Mostra dell’agricoltura, dell’industria e delle arti applicate, detta più comunemente “del Lazio”, tenutasi nel 1923 presso il Galoppatoio di Villa Borghese a Roma, impegnò l’architetto Armando Brasini nella realizzazione di una vera e propria “cittadella” espositiva; gli scenografici padiglioni, poi impiegati per le ambientazioni del film Quo Vadis, furono progettati come elementi cardine di un utopico spazio urbano dove potesse di-mostrarsi la rinascita, tutta fascista, del mito imperiale.

MILITARY NAMES IN SOUTH AFRICA - QUO VADIS?

African Journals Online (AJOL)

pride and unit traditions. After the war and the subsequent demobilisation of the UDF the procedures for naming were described and certain require- ments laid down. During the term of office of the Minister of Defence at the time, F.C. Erasmus,the following proce- dure for naming was promulgated - a procedure that has not ...

Engineering tailored nanoparticles with microbes: quo vadis?

Science.gov (United States)

Prasad, Ram; Pandey, Rishikesh; Barman, Ishan

2016-01-01

In the quest for less toxic and cleaner methods of nanomaterials production, recent developments in the biosynthesis of nanoparticles have underscored the important role of microorganisms. Their intrinsic ability to withstand variable extremes of temperature, pressure, and pH coupled with the minimal downstream processing requirements provide an attractive route for diverse applications. Yet, controlling the dispersity and facile tuning of the morphology of the nanoparticles of desired chemical compositions remains an ongoing challenge. In this Focus Review, we critically review the advances in nanoparticle synthesis using microbes, ranging from bacteria and fungi to viruses, and discuss new insights into the cellular mechanisms of such formation that may, in the near future, allow complete control over particle morphology and functionalization. In addition to serving as paradigms for cost-effective, biocompatible, and eco-friendly synthesis, microbes hold the promise for a unique template for synthesis of tailored nanoparticles targeted at therapeutic and diagnostic platform technologies. © 2015 Wiley Periodicals, Inc.

Treatment of thumb carpometacarpal osteoarthritis; quo vadis?

NARCIS (Netherlands)

Spaans, Anne

2016-01-01

The unique prehensile ability of the human hand is largely due to the biomechanical function of its complex first carpometacarpal (CMC1) joint. This makes the thumb the most important digit of the hand. The unique demands placed on the thumb regarding mobility, stability and transmission of force

Renal denervation: unde venis et quo vadis?

Science.gov (United States)

Nähle, C P; Düsing, R; Schild, H

2015-04-01

Renal denervation is a minimally invasive, catheter-based option for the treatment of refractory hypertension. Indications and contraindications for renal denervation have been defined in an interdisciplinary manner. The efficacy and safety of the procedure were evaluated. Currently, indication for renal denervation is limited to patients with primary hypertension and a systolic blood pressure of ≥ 160 mm Hg (or ≥ 150 mm Hg in diabetes type 2) despite optimal medical therapy with ≥ 3 different antihypertensive drugs. In this specific patient population, an average blood pressure reduction of 32/14 mmHg was observed in non-randomized/-controlled trials after renal denervation. These results were not confirmed in the first randomized controlled trial with a non-significantly superior blood pressure reduction of 14.1 ± 23.9 mm Hg compared to controls (-11.74 ± 25.94 mm Hg, difference -2.39 mm Hg p = 0.26 for superiority with a margin of 5 mm Hg) who underwent a sham procedure. The efficacy and long-term effects of renal denervation need to be re-evaluated in light of the HTN3 study results. To date, renal denervation should not be performed outside of clinical trials. Future trials should also assess if renal denervation can be performed with sufficient safety and efficacy in patients with hypertension-associated diseases. The use of renal denervation as an alternative therapy (e. g. in patients with drug intolerance) can currently not be advocated. The indication for renal denervation should be assessed in an interdisciplinary fashion and according to current guidelines with a special focus on ruling out secondary causes for arterial hypertension. 5 - 10 % of patients with hypertension suffer from refractory hypertension, but only about 1 % of patients meet the criteria for a renal denervation. Renal denervation leads to a significant decrease in office blood pressure; however, the impact on 24-hour blood pressure measurements remains unclear. In the first randomized controlled trial on renal denervation with a control group undergoing a sham procedure, blood pressure reduction failed to reach the anticipated level of superiority over best medical treatment. Periprocedural complications are rare, but long-term safety can currently not be appraised due to the limited data available. © Georg Thieme Verlag KG Stuttgart · New York.

Quo vadis NW Black Sea benthic ecosystems?

Science.gov (United States)

Traian Gomoiu, Marian

2016-04-01

The author briefly presents a general review on the evolution trends of benthic ecosystems at the Romanian Black Sea coast, referring to some recent data from the literature. The Black Sea represents a "unicum hydrobiologicum" by some of its basic characteristics, such as: 1. a large semi-enclosed basin with an intense exchange of waters; 2. a sea receiving a large amount of fresh water, especially in its northwestern sector, brought by the Danube, Dnieper and Dniester Rivers; 3. a large meromictic sea - euxinic-azoic below depths of 150 - 200 m; 4. around the sea there is a large filter-holding belt consisting of bivalves (Mytilus galloprovincialis and Modiolula phaseolina); 5. a sea having in its northwestern sector a large area covered by red algae of the genus Phyllophora; 6. a sea undergoing, in the last 50 years, intense environmental pressures (pollution by large rivers and direct discharges of wastewater from urban areas, the development of maritime traffic, overfishing by bottom trawling, coastal facilities and especially by many defense works of the new port); 7. a sea registering in the last decades of the past century many events of eutrophication; 8. a sea enriching its biodiversity by alien species. After the political and socio-economic changes triggered by the events of 1989 and especially after Romania's accession to EU, the state of the northwestern Black Sea coastal ecosystems, has recorded positive changes: • Decrease in environmental pressures; • Decreasing pollutant / fertilizing discharges into the Danube; • Reduction of domestic sewage quantities from coastal settlements; • Improvement in the quality of the wastewater discharged into the sea; • Reduction of active fishing by bottom trawling; • Adopting and implementing a national / international set of guidelines concerning marine environment; • Adopting regulations on the protection of the marine environment against pollution in marine economy: transport / shipping, tourism / thalasoterapy. Black Sea ecosystem restoration - Certainties and Uncertainties: Pressure on the Danube and other rivers has decreased, chemical discharges have decreased obviously, and yet there appear phenomena of water flowering - "red waters", hypoxia is still present at times and there is mass mortality of fish and other benthic organisms. Why? Signs of recovery should be considered cautiously and uncertainties may be resolved only in a longer time by increasing our scientific efforts. The results of the EU FP7 Project PERSEUS led to the identification of three important issues that should be resolved in order to achieve good environmental status: • Applying an adaptive management to increase the resilience of the ecosystems and to diminish the vulnerability of biodiversity; • Necessity of participative approach by stakeholders; • Identifying and obtaining adequate financial support for new R-D-I projects. Who are the actors in addressing and implementing the actions? • Academic educational and research institutions for adequate working condition; • More specialists trained for taxonomic groups; • Reasonable diversity of coordinating specialists, capable team leaders / satisfactory work packages; • Attracting NGO members towards nature conservation issues; • Resonable stakeholders committed to environmental issues. Studying the results of researches carried out by GeoEcoMar on the Romanian Black Sea coast in recent years, the author concluded that the major problems hampering progress towards a good ecosystem in NW Bent Black Sea are: • lack of diversity in the fields of research, both in theoretical and applied realms; • structural and functional consequences of ecological pressures and the disordered state of the ecosystems in the periods of paroxysmal eutrophication / pollution at the end of the 20th Century; • scarcity of data and knowledge on the Social-Economic System; • high costs of the new marine technology used directly in the sea and laboratories.

Research competency and specialist registration: Quo vadis?

African Journals Online (AJOL)

on the low compliance with the exit outcomes related to registrar requirements to ... individual university level as opposed to the single exit examination which fell under .... the HPCSA requirements and this has been signed off by the research.

Big Data in Caenorhabditis elegans: quo vadis?

Science.gov (United States)

Hutter, Harald; Moerman, Donald

2015-11-05

A clear definition of what constitutes "Big Data" is difficult to identify, but we find it most useful to define Big Data as a data collection that is complete. By this criterion, researchers on Caenorhabditis elegans have a long history of collecting Big Data, since the organism was selected with the idea of obtaining a complete biological description and understanding of development. The complete wiring diagram of the nervous system, the complete cell lineage, and the complete genome sequence provide a framework to phrase and test hypotheses. Given this history, it might be surprising that the number of "complete" data sets for this organism is actually rather small--not because of lack of effort, but because most types of biological experiments are not currently amenable to complete large-scale data collection. Many are also not inherently limited, so that it becomes difficult to even define completeness. At present, we only have partial data on mutated genes and their phenotypes, gene expression, and protein-protein interaction--important data for many biological questions. Big Data can point toward unexpected correlations, and these unexpected correlations can lead to novel investigations; however, Big Data cannot establish causation. As a result, there is much excitement about Big Data, but there is also a discussion on just what Big Data contributes to solving a biological problem. Because of its relative simplicity, C. elegans is an ideal test bed to explore this issue and at the same time determine what is necessary to build a multicellular organism from a single cell. © 2015 Hutter and Moerman. This article is distributed by The American Society for Cell Biology under license from the author(s). Two months after publication it is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

RESEARCH rN SOUTH AFRTCA - QUO VADIS?

African Journals Online (AJOL)

things which I had intended speaking on; so in a sense he has stolen my thunder! ... of world renown has been and is being done. Yet we are still only .... in the growth of research establishments, viz., that more and more research staff get.

Energeetikafoorum "Quo vadis, Eesti energeetika?" / Arvi Hamburg

Index Scriptorium Estoniae

Hamburg, Arvi, 1948-

2006-01-01

Tallinna Tehnikaülikoolis 27. aprillil 2006. a. Ühiskondliku Leppe Sihtasutuse, TTÜ, Eesti Teadlaste Liidu ja Eesti Inseneride Liidu korraldatud foorumist. Avaettekandega esines president Arnold Rüütel

Energeetikafoorum "Quo vadis, Eesti energeetika?" / Arvi Hamburg

Index Scriptorium Estoniae

Hamburg, Arvi, 1948-

2006-01-01

Tallinna Tehnikaülikoolis 27. aprillil 2006. a. Ühiskondliku Leppe Sihtasutuse, Tallinna Tehnikaülikooli, Eesti Teadlaste Liidu ja Eesti Inseneride Liidu korraldatud foorumist. Avaettekandega esines foorumil president Arnold Rüütel

Quo Vadis, kaubandushiid Hyperlex? / Mike Franz Wahl

Index Scriptorium Estoniae

Wahl, Mike Franz, 1966-

2007-01-01

Juhtimiskaasuste võistluse "Juhtimisaju 2007" raames tuli osalejatel lahendada juhtum seoses ettevõtete liitumisega. Vt. samas näited võistlustöödest: Vanaviisi ei saa, uutmoodi ei taha...; Inimesed, rääkige!. Juhtimisaju 2007 parimad võistkonnad

Organ donors: deceased or alive? Quo vadis?

Science.gov (United States)

Rozental, R

2006-01-01

Irrespectively of universal shortage of donor organs there is a tendency of increasing the number of transplantations from living and deceased donors. Each of these two methods has positive and negative features. The main obstacles using living donors are health hazard, necessity to solve certain donor's social and psychological problems, possibility of organ trade and moving. The main problems connected with organ retrieval from deceased donors are possible conflicts with public opinion: difficulties in interpretation of brain death, legislation, obtaining of informed consent from donor's relatives, etc. Future progress in organ transplantation may take place through activation of organ retrieval from deceased donors. The most perspective ways are change to presumed consent in all countries, establishing of centralized system of donor detection and registration, intensification of transplant coordination, active contacts with mass-media, etc. It is necessary to increase (enhance) participation of the members of the public in organ donation process, to develop solidarity among the public members and to involve public authorities to deal with this problem. Bioethical standards should be put in accordance with common progress and some ethical traditions should be changed.

Nanoestruturas de carbono (nanotubos, grafeno: Quo Vadis?

Directory of Open Access Journals (Sweden)

Aldo J. G. Zarbin

2013-01-01

Full Text Available We describe general considerations about the present and the future standing of carbon nanostructures, mainly carbon nanotubes and graphene. Basic concepts and definitions, select structure/property relationships, and potential applications are reviewed. The analysis of the global market for these nanostructures, the commercial products available currently, the role of the chemistry, the main challenges remaining and a brief view of the field in Brazil are also presented and discussed.

China in the South China Sea Dispute: Between Status Quo and Revisionist

OpenAIRE

Triwibowo, Albert

2014-01-01

The paper is trying to look whether China is a status quo power or a revisionist power in theSouth China Sea dispute based on status quo indicator developed by Johnston and perspectives onconformity towards norms. Meanwhile, this paper argues that China is neither a status quo nor arevisionist in the South China Sea dispute to the extent of its compliance with the Declaration on theConduct of Parties (DoC) in the South China Sea. Using status quo indicators developed by Johnstonand also the p...

25 CFR 38.13 - Status quo employees in education positions.

Science.gov (United States)

2010-04-01

... approval, an involuntary change in position shall not affect the current status of status quo education... 25 Indians 1 2010-04-01 2010-04-01 false Status quo employees in education positions. 38.13 Section 38.13 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION EDUCATION PERSONNEL...

Legal Understanding of "Quid Pro Quo" Sexual Harassment in Schools

Science.gov (United States)

Mahlangu, Vimbi Petrus

2017-01-01

This paper highlights legal understanding of quid pro quo sexual harassment in schools. Quid pro quo sexual harassment implies abuse of authority or position to gain something sexual. A duty of care rests on teachers, Schools Governing Bodies and the Department of Education to provide and maintain safe schools that are free from all forms of…

Models of breast cancer: quo vadis, animal modeling?

International Nuclear Information System (INIS)

Wagner, Kay-Uwe

2004-01-01

Rodent models for breast cancer have for many decades provided unparalleled insights into cellular and molecular aspects of neoplastic transformation and tumorigenesis. Despite recent improvements in the fidelity of genetically engineered mice, rodent models are still being criticized by many colleagues for not being 'authentic' enough to the human disease. Motives for this criticism are manifold and range from a very general antipathy against the rodent model system to well-founded arguments that highlight physiological variations between species. Newly proposed differences in genetic pathways that cause cancer in humans and mice invigorated the ongoing discussion about the legitimacy of the murine system to model the human disease. The present commentary intends to stimulate a debate on this subject by providing the background about new developments in animal modeling, by disputing suggested limitations of genetically engineered mice, and by discussing improvements but also ambiguous expectations on the authenticity of xenograft models to faithfully mimic the human disease

[Rehabilitation for digestive and metabolic diseases. Quo vadis?].

Science.gov (United States)

Stockbrugger, R; Rosemeyer, D; Armbrecht, U

2010-10-01

The position of rehabilitation in gastroenterology, hepatology and metabolic diseases has changed little in the last 25 years. Initial improvements in quality are oriented more to the content of rehabilitative measures and less to organizational basic conditions. Nevertheless, there is an urgent need for action if rehabilitation medicine is to achieve an equivalent and recognized position in the interaction between primary care and other medical specialties. In this article suggestions for expedient prerequisites and utilization options of rehabilitation in the fields of hepatogastroenterology and metabolism will be presented, which are also oriented to the exemplary implemented concepts from Sweden and The Netherlands.

Fremmedspråk på barnetrinnet - quo vadis?

Directory of Open Access Journals (Sweden)

Camilla Bjørke

2014-09-01

Full Text Available Artikkelen har som hovedtema fremmedspråk på barnetrinnet, og tar for seg muntlig kompetanse elever på 7. trinn har tilegnet seg i faget spansk. Fokus er på lytte- og samtalestrategier samt ulike læringsarenaer og språklig input. I artikkelen belyses også hvilke kompetanser forfatterne mener vil bli viktige i fremmedspråkopplæringen på barnetrinnet i årene framover.

Case for real-time systems development - Quo vadis?

Science.gov (United States)

Erb, Dona M.

1991-01-01

The paper focuses on the distinctive issues of computer-aided software engineering (CASE) products for the development of real-time systems. CASE technologies and associated standardization efforts are evolving from sets of conflicting interests. The majority of case products are intended for use in the development of management information systems. CASE products to support the development of large, complex real-time systems must provide additional capabilities. Generic concerns include the quality of the implementation of the required method for the phase of the system's development and whether the vendor is stable and committed to evolving the products in parallel with nonproprietary standards. The CASE market is undergoing considerable consolidation. The paper describes the major forces, cooperating entities, and remaining uncertainties that need to be weighed in near-term CASE procurements to limit risk of loss of investment in project time, trianing, and money.

Germany as an energy-producing country - quo vadis?

International Nuclear Information System (INIS)

Rauscher, K.

2003-01-01

Secure, sufficient electricity supplies available at any time, as guaranteed in Germany, are vital to the existence of our modern society. Under the conditions of deregulated markets, it must continue to be possible in Germany to offer reliable, economical and non-polluting energy supplies. These three factors should enjoy equal importance in energy policy decisions in the interest of sustainability. The skewed balance caused by political preferences as experienced at the present time can jeopardize the general objective of optimization of the three factors in the long run. As in no other country, the power industry in Germany had to make a considerable adaptation effort, inter alia, because of market deregulation, airborne pollutant reduction, and agreements on the operating life of existing nuclear power plants. Other problems are likely to arise in the near future, e.g. in connection with emission trading. The power industry is willing and able to solve these future problems. This is true in particular of the expected replacement of power plants of approx. 40 000 MW generating capacity in Germany, where the European framework must be taken into account with a replacement requirement of approx. 200 000 MW. This implies investments of euro 50 billion in Germany alone, which can be made only if there is sufficient security in planning for the operators of power plants. The choice of efficient and economically viable power generation technologies must be possible in this respect. (orig.) [de

[Cause-of-death statistics and ICD, quo vadis?

Science.gov (United States)

Eckert, Olaf; Vogel, Ulrich

2018-07-01

The International Statistical Classification of Diseases and Related Health Problems (ICD) is the worldwide binding standard for generating underlying cause-of-death statistics. What are the effects of former revisions of the ICD on underlying cause-of-death statistics and which opportunities and challenges are becoming apparent in a possible transition process from ICD-10 to ICD-11?This article presents the calculation of the exploitation grade of ICD-9 and ICD-10 in the German cause-of-death statistics and quality of documentation. Approximately 67,000 anonymized German death certificates are processed by Iris/MUSE and official German cause-of-death statistics are analyzed.In addition to substantial changes in the exploitation grade in the transition from ICD-9 to ICD-10, regional effects become visible. The rate of so-called "ill-defined" conditions exceeds 10%.Despite substantial improvement of ICD revisions there are long-known deficits in the coroner's inquest, filling death certificates and quality of coding. To make better use of the ICD as a methodological framework for mortality statistics and health reporting in Germany, the following measures are necessary: 1. General use of Iris/MUSE, 2. Establishing multiple underlying cause-of-death statistics, 3. Introduction of an electronic death certificate, 4. Improvement of the medical assessment of cause of death.Within short time the WHO will release the 11th revision of the ICD that will provide additional opportunities for the development of underlying cause-of-death statistics and their use in science, public health and politics. A coordinated effort including participants in the process and users is necessary to meet the related challenges.

[Geriatrics or geriatricization of medicine : Quo vadis geriatrics?

Science.gov (United States)

Kolb, G F

2017-12-01

This article examines the question whether and how geriatrics will change in the future and whether in view of the demographic changes the trend will go more in the direction of a further expansion of geriatrics or more towards a geriatricization of individual specialist medical fields. The different development of geriatrics in the individual Federal States can only be understood historically and is absolutely problematic against the background of the new hospital remuneration system. Geriatrics is a typical cross-sectional faculty and still has demarcation problems with other faculties but has also not yet clearly defined the core competence. This certainly includes the increasing acquisition of decentralized joint treatment concepts and geriatric counselling services in the future, in addition to the classical assessment instruments. Keywords in association with this are: traumatology and othopedics of the elderly, geriatric neurology and geriatric oncology. Interdisciplinary geriatric expertise is increasingly being requested. Outpatient structures have so far not been prioritized in geriatrics. An independent research is under construction and it is gratifying that academic interest in geriatrics seems to be increasing and new professorial chairs have been established. It is not possible to imagine our hospital without geriatrics; however, there is still a certain imbalance between the clearly increased number of geriatric hospital beds, the representation of geriatrics in large hospitals (e.g. specialized and maximum care hospitals and university clinics), the secure establishment in further education regulations and the lack of a uniform nationwide concept of geriatrics.

Competition soft law in national courts - Quo vadis

NARCIS (Netherlands)

Georgieva, Zlatina

2016-01-01

This paper is based on an empirical data-set of 103 national competition cases of EU Member States, which contain judicial reasoning on supranational, Commission-issued competition soft law. The paper enquires into the possible reasons for detected national judicial attitudes to supranational soft

Quo vadis code optimization in high energy physics

International Nuclear Information System (INIS)

Jarp, S.

1994-01-01

Although performance tuning and optimization can be considered less critical than in the past, there are still many High Energy Physics (HEP) applications and application domains that can profit from such an undertaking. In CERN's CORE (Centrally Operated RISC Environment) where all major RISC vendors are present, this implies an understanding of the various computer architectures, instruction sets and performance analysis tools from each of these vendors. This paper discusses some initial observations after having evaluated the situation and makes some recommendations for further progress

"Quo vadis", Europa? Uma pergunta que não quer calar "Quo vadis", Europe? A question that will not go away

Directory of Open Access Journals (Sweden)

Sonia de Camargo

2004-06-01

Full Text Available Dois temas básicos são discutidos e examinados neste trabalho: a incorporação de dez novos membros aos quadros da União Européia e a constitucionalização de sua estrutura jurídico-institucional. Para tanto, proponho-me, de um lado, a reconstituir os passos político-institucionais que cobrem o período que vai de uma Europa do pós-guerra, fragmentada e enfraquecida, a uma Europa pós-Guerra Fria, pronta para se estender a todo o continente, processo que se abre em maio de 2004 com a incorporação de dez Estados vindos do Leste Europeu; de outro, a reproduzir o debate institucional entre uma Europa federal e uma Europa de Estados, o qual levou a que, em junho de 2003, fosse apresentado ao Conselho Europeu reunido em Salônica o projeto do novo Tratado da União e, em dezembro de 2003, fosse discutido, na Cúpula de Chefes de Estado da UE, reunida em Bruxelas, o texto da primeira Constituição para a Europa.Two basic themes are discussed and examined in this paper: the incorporation of ten new members into the European Union frame and the creation of institutional-legal structure supported by a Constitution. To do so, I propose, on one hand, to reconstitute the political-institutional steps which covered the period coming from post-war Europe, fragmented and weakened, to a post-Cold War Europe ready to spread throughout the continent. This process began in May 2004 with the incorporation of ten States of Eastern Europe. On the other hand, I intend to reproduce the institutional debate between a Federal Europe and a Europe of States, debate which conducted to the presentation to the European Council of the project of the new Treaty of the Union, which met in Salonika, in June 2003; second, to the discussion of the text of the first European Constitution, in the Summit of Heads of States of EU, held in Brussels, December 2003.

17. Dialogue on waste management MV. Current developments in waste and resources economics. Proceedings; 17. DIALOG Abfallwirtschaft MV. Aktuelle Entwicklungen in der Abfall- und Ressourcenwirtschaft. Tagungsband

Energy Technology Data Exchange (ETDEWEB)

Nelles, Michael (ed.)

2016-08-01

This proceedings of 17th DIALOG Waste Management Mecklenburg-Western Pomerania contains 13 lectures. The topics were: Phosphorus recycling of wastewater and sewage sludge (Robert Ristow); Current waste legislation developments (Wolfgang Siederer); Further development of the recycling industry (Andreas Bruckschen); Resource-efficient recycling business - a challenge for municipalities (Holger Thaerichen); Brick Recycling (Anette Mueller); Who has the buck? competence and responsibility in collection, transportation and recycling of waste electrical equipment (Hans-Bernhard Rhein); Recovery of biogenic waste - Development, status and prospects (Martin Kranert); Experience in the bio-waste collection in the district of Western Pomerania-Ruegen (Torsten Ewert); Biowaste concept of OVVD GmbH (Stephan Schuett); Quo vadis BAWA Schwerinum? Biowaste treatment facility Schwerin - first operation experience (Andreas Lange); Future marketing opportunities for compost (Anke Boisch); Status and prospects of waste and substance flow management (Michael Nelles); Development of separate collection of biowaste quantities in Mecklenburg-Western Pomerania. [German] Dieser Tagungsband von der 17. DIALOG Abfallwirtschaft Mecklenburg-Vorpommern in Rostock enthaelt 13 Vortraege. Die Themen waren: Phosphor-Recycling aus Abwasser und Klaerschlamm (Robert Ristow); Aktuelle abfallrechtliche Entwicklungen (Wolfgang Siederer); Weiterentwicklung der Recyclingwirtschaft (Andreas Bruckschen); Ressourceneffiziente Wertstoffwirtschaft ? eine Herausforderung fuer die Kommunen (Holger Thaerichen); Ziegelrecycling (Anette Mueller et. al.); Wer hat den schwarzen Peter? Zustaendigkeiten und Verantwortlichkeiten bei Sammlung, Transport und Verwertung von Elektroaltgeraeten (Hans-Bernhard Rhein); Verwertung biogener Abfaelle - Entwicklung, Stand und Perspektiven (Martin Kranert); Erfahrungen bei der Bioabfallerfassung im Landkreis Vorpommern-Ruegen (Torsten Ewert); Bioabfallkonzept der OVVD GmbH (Stephan

Legal Understanding of Quid Pro Quo Sexual Harassment in Schools

OpenAIRE

Vimbi Petrus Mahlangu

2017-01-01

Paper highlights legal understanding of quid pro quo sexual harassment in schools. Quid pro quo sexual harassment implies abuse of authority or position to gain something sexual. A duty of care rests on teachers, Schools Governing Bodies and the Department of Education to provide and maintain safe schools that are free from all forms of victimisation and abuse. However, there seems to be an abuse of power by all those who are supposedly to protect learners in schools. Paper used an abuse of o...

[Quo vadis pathologia? An elderly clinicians meditations about autopsies].

Science.gov (United States)

Iványi, J

1998-02-08

Relying on his own experience and the relevant literature of the past 15 years, the author analyzes the causes of the decrease in the number of autopsies. He disagrees with those who, referring to the application of state-of-the art examination methods, dismiss "the ultimate audit" as unnecessary and only suggest selection. Careful autopsies can still be rendered an authentic and reliable picture of treatment of the deceased on the one hand, and provide information about diagnostic difficulties as well as the possible mistakes and errors on the other. This is especially true of the elderly deceased usually with multimorbidity. As well as several aspects of the cooperation between the pathologist and the clinician there is the didactic importance of autopsies that should also be emphasized.

Future of sewage sludge in disposal; Klaerschlammentsorgung. Quo vadis?

Energy Technology Data Exchange (ETDEWEB)

Wiechmann, Benjamin [Umweltbundesamt, Dessau (Germany). Fachgebiet III 2.4 - Abfalltechnik, Abfalltechniktransfer

2013-06-01

The thermal treatment of sewage sludge is changing continuously. In the future, the disposal of sewage sludge is framed and will be adjust by the idea of resource saving. Simultaneously due the amendment of the 17th BImSchV emission control will be encouraged. Although, more than a quarter of the upcoming sludge is incinerated in mono-incineration plants, this amount should be increased. Therefore, it is necessary to build up new capacities of mono-incineration plants. The legal and strategic framework which has an influence on the combustion of sludge will be examined in this paper. (orig.)

Quo vadis, USA dollar? : finantsturgude viimastest arengutest / Robert Liljequist

Index Scriptorium Estoniae

Liljequist, Robert

2013-01-01

Swedbank AB Soome strateegiajuht vastab küsimustele, mis puudutavad USA majandust alanud aastal, dollari n.-ö turvalise valuuta staatuse kaotamise ohtu, võlakirjade ostmise vähendamist ja selle mõju USA dollarile, Euroopa Keskpanga poliitika mõju euro ja USA dollari suhtele. Swebanki prognoos USA dollari kohta

Bioabsorbable Stent Quo Vadis: A Case for Nano-Theranostics

Science.gov (United States)

Gundogan, Buket; Tan, Aaron; Farhatnia, Yasmin; Alavijeh, Mohammad S.; Cui, Zhanfeng; Seifalian, Alexander M.

2014-01-01

Percutaneous coronary intervention (PCI) is one of the most commonly performed invasive medical procedures in medicine today. Since the first coronary balloon angioplasty in 1977, interventional cardiology has seen a wide array of developments in PCI. Bare metal stents (BMS) were soon superseded by the revolutionary drug-eluting stents (DES), which aimed to address the issue of restenosis found with BMS. However, evidence began to mount against DES, with late-stent thrombosis (ST) rates being higher than that of BMS. The bioabsorbable stent may be a promising alternative, providing vessel patency and support for the necessary time required and thereafter degrade into safe non-toxic compounds which are reabsorbed by the body. This temporary presence provides no triggers for ST, which is brought about by non-endothelialized stent struts and drug polymers remaining in vivo for extended periods of time. Likewise, nano-theranostics incorporated into a bioabsorbable stent of the future may provide an incredibly valuable single platform offering both therapeutic and diagnostic capabilities. Such a stent may allow delivery of therapeutic particles to specific sites thus keeping potential toxicity to a minimum, improved ease of tracking delivery in vivo by embedding imaging agents, controlled rate of therapy release and protection of the implanted therapy. Indeed, nanocarriers may allow an increased therapeutic index as well as offer novel post-stent implantation imaging and diagnostic methods for atherosclerosis, restenosis and thrombosis. It is envisioned that a nano-theranostic stent may well form the cornerstone of future stent designs in clinical practice. PMID:24672583

Quo Vadis Venomics? A Roadmap to Neglected Venomous Invertebrates

Science.gov (United States)

von Reumont, Bjoern Marcus; Campbell, Lahcen I.; Jenner, Ronald A.

2014-01-01

Venomics research is being revolutionized by the increased use of sensitive -omics techniques to identify venom toxins and their transcripts in both well studied and neglected venomous taxa. The study of neglected venomous taxa is necessary both for understanding the full diversity of venom systems that have evolved in the animal kingdom, and to robustly answer fundamental questions about the biology and evolution of venoms without the distorting effect that can result from the current bias introduced by some heavily studied taxa. In this review we draw the outlines of a roadmap into the diversity of poorly studied and understood venomous and putatively venomous invertebrates, which together represent tens of thousands of unique venoms. The main groups we discuss are crustaceans, flies, centipedes, non-spider and non-scorpion arachnids, annelids, molluscs, platyhelminths, nemerteans, and echinoderms. We review what is known about the morphology of the venom systems in these groups, the composition of their venoms, and the bioactivities of the venoms to provide researchers with an entry into a large and scattered literature. We conclude with a short discussion of some important methodological aspects that have come to light with the recent use of new -omics techniques in the study of venoms. PMID:25533518

Integration of fisheries into marine spatial planning: Quo vadis?

DEFF Research Database (Denmark)

Janssen, Holger; Bastardie, Francois; Eero, Margit

2018-01-01

fails. In this article, we review the state of the art and latest progress in research on various challenges in the integration of fisheries into MSP. The reviewed studies address a wide range of integration challenges, starting with techniques to analyse where fishermen actually fish, assessing...... in the future, and finally, examining how fisheries could benefit from MSP. This paper gives an overview of the latest developments on concepts, tools, and methods. It becomes apparent that the spatial and temporal dynamics of fish and fisheries, as well as the definition of spatial preferences, remain major...

Integration of fisheries into marine spatial planning: Quo vadis?

Science.gov (United States)

Janßen, Holger; Bastardie, Francois; Eero, Margit; Hamon, Katell G.; Hinrichsen, Hans-Harald; Marchal, Paul; Nielsen, J. Rasmus; Le Pape, Olivier; Schulze, Torsten; Simons, Sarah; Teal, Lorna R.; Tidd, Alex

2018-02-01

The relationship between fisheries and marine spatial planning (MSP) is still widely unsettled. While several scientific studies highlight the strong relation between fisheries and MSP, as well as ways in which fisheries could be included in MSP, the actual integration of fisheries into MSP often fails. In this article, we review the state of the art and latest progress in research on various challenges in the integration of fisheries into MSP. The reviewed studies address a wide range of integration challenges, starting with techniques to analyse where fishermen actually fish, assessing the drivers for fishermen's behaviour, seasonal dynamics and long-term spatial changes of commercial fish species under various anthropogenic pressures along their successive life stages, the effects of spatial competition on fisheries and projections on those spaces that might become important fishing areas in the future, and finally, examining how fisheries could benefit from MSP. This paper gives an overview of the latest developments on concepts, tools, and methods. It becomes apparent that the spatial and temporal dynamics of fish and fisheries, as well as the definition of spatial preferences, remain major challenges, but that an integration of fisheries is already possible today.

Image-guided interventions and computer-integrated therapy: Quo vadis?

Science.gov (United States)

Peters, Terry M; Linte, Cristian A

2016-10-01

Significant efforts have been dedicated to minimizing invasiveness associated with surgical interventions, most of which have been possible thanks to the developments in medical imaging, surgical navigation, visualization and display technologies. Image-guided interventions have promised to dramatically change the way therapies are delivered to many organs. However, in spite of the development of many sophisticated technologies over the past two decades, other than some isolated examples of successful implementations, minimally invasive therapy is far from enjoying the wide acceptance once envisioned. This paper provides a large-scale overview of the state-of-the-art developments, identifies several barriers thought to have hampered the wider adoption of image-guided navigation, and suggests areas of research that may potentially advance the field. Copyright © 2016. Published by Elsevier B.V.

Quo vadis? : persuasive computing using real time queue information

NARCIS (Netherlands)

Meys, Wouter; Groen, Maarten

2014-01-01

By presenting tourists with real-time information an increase in efficiency and satisfaction of their day planning can be achieved. At the same time, real-time information services can offer the municipality the opportunity to spread the tourists throughout the city centre. An important factor for

Quo Vadis Venomics? A Roadmap to Neglected Venomous Invertebrates

Directory of Open Access Journals (Sweden)

Bjoern Marcus von Reumont

2014-12-01

Full Text Available Venomics research is being revolutionized by the increased use of sensitive -omics techniques to identify venom toxins and their transcripts in both well studied and neglected venomous taxa. The study of neglected venomous taxa is necessary both for understanding the full diversity of venom systems that have evolved in the animal kingdom, and to robustly answer fundamental questions about the biology and evolution of venoms without the distorting effect that can result from the current bias introduced by some heavily studied taxa. In this review we draw the outlines of a roadmap into the diversity of poorly studied and understood venomous and putatively venomous invertebrates, which together represent tens of thousands of unique venoms. The main groups we discuss are crustaceans, flies, centipedes, non-spider and non-scorpion arachnids, annelids, molluscs, platyhelminths, nemerteans, and echinoderms. We review what is known about the morphology of the venom systems in these groups, the composition of their venoms, and the bioactivities of the venoms to provide researchers with an entry into a large and scattered literature. We conclude with a short discussion of some important methodological aspects that have come to light with the recent use of new -omics techniques in the study of venoms.

QUO VADIS: STATUS JABATAN DAN SISTEM KARIR KEPANITERAAN PERADILAN

Directory of Open Access Journals (Sweden)

Budi Suhariyanto

2014-03-01

Full Text Available Secara  normatif  status  jabatan  kepaniteraan  peradilan  diatur  secara  berbeda.  Eksplisit  ditetapkan sebagai jabatan fungsional, jabatan fungsional tanpa angka  kredit dan pejabat peradilan. Kualifikasi fungsional yang dimiliki kepaniteraan peradilan keberadaannya disetarakan dengan jabatan struktural dan  sistem  kenaikan  pangkatnya  reguler.  Pada  Mahkamah  Agung,  jabatan  kepaniteraan  disyaratkan dari  Hakim,  sehingga  Panitera  karir  mempunyai  jenjang  tertinggi  hanya  di  kepaniteraan  pengadilan tingkat banding. Sehubungan dengan adanya RUU MA 2012 yang memberikan sebagian porsi jabatan kepaniteraan  Mahkamah  Agung  kepada  Panitera  karir  dan  diberlakukannya  UU  ASN  yang berorientasi pada fungsionalisasi PNS maka perlu ada evaluasi terkait status jabatan dan sistem karir kepaniteraan  peradilan.  Kategorisasi  kepaniteraan  peradilan sebagai jabatan  fungsional  khusus perlu dipertimbangkan dalam ius constituendum.   Normatively,  judicial  registrar  status  is  set  differently.  While  explicity  defined  as  a  functional,  but without  the  credit  and  judicial  office.  Functional  qualification  held  judicial  registrar  existence  is synchronizedwith the structural position of the promotion system and regular. A clerk on the supreme of court must be a judges. So that the clerk have a career at the highest level only appellate court registry. The supreme of court regulation drafting that gaves the registrar portion to career clerk, then enactment  of  civilian  state  apparatus  regulation  get  the  civil  servants  functional  oriented.  It  is necessary to evaluate the official status to career system. On the ius constituendum,    registrar as the special functional need to be considered. Normatively,  judicial  registrar  status  is  set  differently.  While  explicity  defined  as  a  functional,  but without  the  credit  and  judicial  office.  Functional  qualification  held  judicial  registrar  existence  is synchronizedwith the structural position of the promotion system and regular. A clerk on the supreme of court must be a judges. So that the clerk have a career at the highest level only appellate court registry. The supreme of court regulation drafting that gaves the registrar portion to career clerk, then enactment  of  civilian  state  apparatus  regulation  get  the  civil  servants  functional  oriented.  It  is necessary to evaluate the official status to career system. On the ius constituendum,    registrar as the special functional need to be considered.

Defending or Challenging the Status Quo: Position Effects on Biased Intergroup Perceptions

Directory of Open Access Journals (Sweden)

Emma A. Bäck

2014-05-01

Full Text Available The default ideological position is status quo maintaining, and challenging the status quo is associated with increased efforts and risks. Nonetheless, some people choose to challenge the status quo. Therefore, to challenge the status quo should imply a strong belief in one’s position as the correct one, and thus efforts may be undertaken to undermine the position of others. Study 1 (N = 311 showed that challengers undermined, by ascribing more externality and less rationality, the position of defenders to a larger extent than defenders did of challengers’ position. Studies 2 (N = 135 and 3 (N = 109 tested if these effects were driven by the implied minority status of the challenging position. Results revealed no effects of experimentally manipulated numerical status, but challengers were again more biased than defenders. Study 3 also revealed that challengers felt more negatively toward their opponents (possibly due to greater social identification with like-minded others, and these negative emotions in turn predicted biased attributions. Results are important as they add to the understanding of how intergroup conflict may arise, providing explanations for why challengers are less tolerant of others’ point of view.

The LEAN Payload Integration Process

Science.gov (United States)

Jordan, Lee P.; Young, Yancy; Rice, Amanda

2011-01-01

It is recognized that payload development and integration with the International Space Station (ISS) can be complex. This streamlined integration approach is a first step toward simplifying payload integration; making it easier to fly payloads on ISS, thereby increasing feasibility and interest for more research and commercial organizations to sponsor ISS payloads and take advantage of the ISS as a National Laboratory asset. The streamlined integration approach was addressed from the perspective of highly likely initial payload types to evolve from the National Lab Pathfinder program. Payloads to be accommodated by the Expedite the Processing of Experiments for Space Station (EXPRESS) Racks and Microgravity Sciences Glovebox (MSG) pressurized facilities have been addressed. It is hoped that the streamlined principles applied to these types of payloads will be analyzed and implemented in the future for other host facilities as well as unpressurized payloads to be accommodated by the EXPRESS Logistics Carrier (ELC). Further, a payload does not have to be classified as a National Lab payload in order to be processed according to the lean payload integration process; any payload that meets certain criteria can follow the lean payload integration process.

Induction - organisational renewal and the maintenance of status quo

DEFF Research Database (Denmark)

Elkjær, Bente; Sprogøe, Jonas

2010-01-01

is to explore how induction of newcomers can be understood as both organizational renewal and the maintenance of status quo, and to develop ways of describing this in terms of learning.    Design/methodology/approach: The article is designed as a qualitative study of induction practices in two branches...... of a Danish retail bank and a Danish management consulting company. The data is based on 30 semi-structured interviews and on some observations in the case companies. The data has subsequently been analyzed phenomenologically and thematically in light of a pragmatist understanding of learning. Findings......: The paper provides two main findings. 1) The duality of induction, in terms of organizational renewal and the maintenance of status quo can be conceptualized and meaningfully discussed through the metaphors of organizational rhythm and generative dance. And 2), if this ambiguous dimension of induction...

Patient inertia and the status quo bias: when an inferior option is preferred.

Science.gov (United States)

Suri, Gaurav; Sheppes, Gal; Schwartz, Carey; Gross, James J

2013-09-01

Medical noncompliance is a major public-health problem. One potential source of this noncompliance is patient inertia. It has been hypothesized that one cause of patient inertia might be the status quo bias-which is the tendency to select the default choice among a set of options. To test this hypothesis, we created a laboratory analogue of the decision context that frequently occurs in situations involving patient inertia, and we examined whether participants would stay with a default option even when it was clearly inferior to other available options. Specifically, in Studies 1 and 2, participants were given the option to reduce their anxiety while waiting for an electric shock. When doing nothing was the status quo option, participants frequently did not select the option that would reduce their anxiety. In Study 3, we demonstrated a simple way to overcome status quo bias in a context relevant to patient inertia.

Payload specialist Ronald Parise checks on ASTRO-2 payload

Science.gov (United States)

1995-01-01

Payload specialist Ronald A. Parise, a senior scientist in the Space Observatories Department of Computer Sciences Corporation (CSC), checks on the ASTRO-2 payload (out of frame in the cargo bay of the Space Shuttle Endeavour). Parise is on the aft flight deck of the Earth orbiting Endeavour during STS-67.

Quo Vadis the B.A. degree: Perceptions and visions1

Directory of Open Access Journals (Sweden)

Annette L. Combrink

1993-03-01

Full Text Available Today is a very special day for all the graduates assembled to have a B.A. degree conferred on them. It is a day on which to celebrate the reward for hard work and for realized dreams. This is a very homogeneous group of people - in the sense that they will be receiving B.A. degrees, and for that reason it would be highly apposite to share some cherished thought and ideas about the B.A. degree.

The pentafluorostyrene endeavours with atom transfer radical polymerization - quo vadis?

DEFF Research Database (Denmark)

Hvilsted, Søren

2014-01-01

The versatility of the atom transfer radical polymerization (ATRP) of pentafluorostyrene (FS) is comprehensively evaluated. The ATRP of a wide range of monomers derived from FS is likewise discussed with emphasis on the potential polymer applications. A large number of block and star copolymers...... centred around polypentafluorostyrene (PFS) and prepared primarily using the bromomacroinitiator concept is surveyed. Here the main emphasis is on the feasibility of the polymer design, but also the very many different applications are highlighted. The potential grafting onto PFS and PFS block copolymers...... by exploitation of the very labile para-fluorine demonstrates new material architecture possibilities through very mild reaction conditions. Finally the utility of PFS in various conducting materials is elaborated. The amphiphilic nature of PFS in triblock copolymers with polyethers has been exploited for Li+ ion...

Moldova Quo Vadis: Neutrality and European Integration? Problems of Policy

Science.gov (United States)

2008-03-01

refer to their sovereign for protection against foreign threats, is anarchic.11 Subsequent realists, debating against the supporters of Kantian and...UN authority in security matters, and Austria’s contribution of troops within the EU under a UN mandate would be considered entirely ethical ...political and economic interdependence, ambiguity is the only realistic way of joining self-interest to ethical principle.” See Bill McSweeney, “The

Tyre-pavement interface contact stresses on flexible pavements - quo vadis?

CSIR Research Space (South Africa)

De Beer, Morris

2004-09-01

Full Text Available on tyre inflation pressure on this route is also given. The paper also discusses an improved definition of the actual tyre/pavement interaction of modern heavy vehicles and their loads on the current flexible road infrastructure....

Application of Liposomes in Treatment of Rheumatoid Arthritis: Quo Vadis

Directory of Open Access Journals (Sweden)

Bhupinder Kapoor

2014-01-01

Full Text Available The most common treatments for rheumatoid arthritis include nonsteroidal anti-inflammatory drugs (NSAIDs, corticosteroids, disease modifying antirheumatic drugs (DMARDs, and some biological agents. However, none of the treatments available is able to achieve the ultimate goal of treatment, that is, drug-free remission. This limitation has shifted the focus of treatment to delivery strategies with an ability to deliver the drugs into the synovial cavity in the proper dosage while mitigating side effects to other tissues. A number of approaches like microemulsions, microspheres, liposomes, microballoons, cocrystals, nanoemulsions, dendrimers, microsponges, and so forth, have been used for intrasynovial delivery of these drugs. Amongst these, liposomes have proven to be very effective for retaining the drug in the synovial cavity by virtue of their size and chemical composition. The fast clearance of intra-synovially administered drugs can be overcome by use of liposomes leading to increased uptake of drugs by the target synovial cells, which in turn reduces the exposure of nontarget sites and eliminates most of the undesirable effects associated with therapy. This review focuses on the use of liposomes in treatment of rheumatoid arthritis and summarizes data relating to the liposome formulations of various drugs. It also discusses emerging trends of this promising technology.

Gynaecology – Quo vadis? Situation Analysis, National and International Perspectives

Science.gov (United States)

Brucker, S. Y.; Simoes, E.; Wallwiener, D.

2014-01-01

In a large and heavily networked specialty like gynaecology it is a particular challenge with regard to future status to achieve excellent patient care, research and teaching. At the same time not only hospitals but also research facilities are experiencing increasing pressure from performance and competition sides in terms of survival and further development on the clinical, scientific and economic fronts. The numerous changes, including paradigm shifts, in medicine, society, the health-care system and scientific innovations present new challenges to the specialty. This leads to questions about priority, problem areas and weaknesses as well as to new opportunities for the field and the overall question if it will be possible to meet the paradigm shifts and problems by the creation of new structures. In the light of the need for and the potential of design measures, this article presents a SWOT analysis of the specialtyʼs situation as a whole and in particular for gynaecology in German universities. One sees additional demands that add up to an expansion of the tasks. At the same time the shortage of new recruits becomes apparent. A broadening of the perspectives on womenʼs health and individualised medicine come into focus. Partial solutions include new supporting structures, capacity measurements as well as even structural options. In particular, the department structure, that is common abroad, opens an opportunity for specialisation while maintaining unity for a broader further training and strengthened research. Chances and strengths of the specialty are especially effective in coordinated and concerted activities. PMID:25568466

Germania Quo Vadis?: Dynamics of Change in German Security Policy

Science.gov (United States)

2007-06-01

Keohane, Robert O., Michael Brecher and Frank Harveys, eds. Institutional Theory in international Relations. In: Millennial Reflections on International...Hegemony: Cooperation and Discord in the World Political Economy, (Princeton University Press, 1984), pp. 78-109; Robert O. Keohane, “ Institutional ... Theory in international Relations,” in Michael Brecher and Frank Harveys, eds., Millennial Reflections on International Studies (University of Michigan

Freedom of Contract in the Post-Crisis Era: Quo Vadis?

NARCIS (Netherlands)

Cherednychenko, O.O.

2014-01-01

This article explores to what extent the future development of European financial services contract law will be determined by the information paradigm in the post-crisis era. By using the examples from the field of investment services and consumer credit, it shows that the regulatory measures

The legislative actor in the Nobel era: Quo Vadis EU?

Directory of Open Access Journals (Sweden)

Ana Isabel Xavier

2013-05-01

Full Text Available The idea of a political union, as well as an economic union of Europe, beyond free circulation of persons, goods and services, has always been included in the ideals of the building of Europe. However, its de jure formalization only occurs on November 1, 1993, when the Treaty of Maastricht is in force and a new political and strategic actor is in place: the European Union (EU. Since then, literature has "defined" the European Union in order to clearly establish what this UPO - Unidentified Political Object (an expression by Jacques Delors in the 1990s - is or what it can be. One of the ideas which has been a focus of discussion is that of "legislative actor" (Manners, 2001; 2002, which claims that the European Union has progressed towards normativity, both internally as well as externally, to its close neighbors and its relations with the rest of the world. This paper aims to contribute to the discussion on Europe's quality or condition to impose rules. We will begin by systematizing a series of achievements which, according to Manners, lead to the triangle democracy, Human Rights and good governance in the signing of the Treaty of Lisbon on December 13, 2007 and its entering in full force on December 1, 2009. However, this paper does not disregard the fact that the concept "legislative actor" has been (reworked and perfected by its author and other scholars due to criticism and empirical studies and has thus been altered, enhanced and argued against. Therefore, some concepts will be studied whose arguments will allow us to question the internal and external dimension of the actor European Union. We will also explore the symbolic power of the Union in the development of tools and capacity to be acknowledged as an actor able to face current threats and challenges but whose profile may not be different from other actors in international relations. Finally, we will discuss the impact of the EU having been awarded the Nobel Peace Prize in 2012 on the (redefining of rules, values and principles and on the present financial crisis in the future of the "economic giant but a political dwarf".

Legal Understanding of Quid Pro Quo Sexual Harassment in Schools

Directory of Open Access Journals (Sweden)

Vimbi Petrus Mahlangu

2017-05-01

Full Text Available Paper highlights legal understanding of quid pro quo sexual harassment in schools. Quid pro quo sexual harassment implies abuse of authority or position to gain something sexual. A duty of care rests on teachers, Schools Governing Bodies and the Department of Education to provide and maintain safe schools that are free from all forms of victimisation and abuse. However, there seems to be an abuse of power by all those who are supposedly to protect learners in schools. Paper used an abuse of organisational power theory and conceptualisation framework as a lens used in analysing various forms of victimisation and abuse with an effort to provide a better understanding of behaviour that amounts to abuse. Paper concludes with guidelines for handling harassment and bullying in the school contexts.

14 CFR 415.57 - Payload review.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Payload review. 415.57 Section 415.57... TRANSPORTATION LICENSING LAUNCH LICENSE Payload Review and Determination § 415.57 Payload review. (a) Timing. A payload review may be conducted as part of a license application review or may be requested by a payload...

Guidelines for Hosted Payload Integration

Science.gov (United States)

2014-06-06

reduces risk. Need to consider mass simulator to protect host launch window. Average Payload Power Both BOL and EOL . Host must consider orbit...acceptance testing. Peak Payload Power Both BOL and EOL . Host must consider orbit constraints. Typically driven by Payload operations but must...post-retirement failure might cause damage to the Spacecraft Host or its payloads. Safe conditions at EOL should consider thermal and radiation

Payload Launch Lock Mechanism

Science.gov (United States)

Young, Ken (Inventor); Hindle, Timothy (Inventor)

2014-01-01

A payload launch lock mechanism includes a base, a preload clamp, a fastener, and a shape memory alloy (SMA) actuator. The preload clamp is configured to releasibly restrain a payload. The fastener extends, along an axis, through the preload clamp and into the base, and supplies a force to the preload clamp sufficient to restrain the payload. The SMA actuator is disposed between the base and the clamp. The SMA actuator is adapted to receive electrical current and is configured, upon receipt of the electrical current, to supply a force that causes the fastener to elongate without fracturing. The preload clamp, in response to the fastener elongation, either rotates or pivots to thereby release the payload.

Quand le film raconte l’image. Variations cinématographiques autour de La Cène de Léonard de Vinci

Directory of Open Access Journals (Sweden)

Valentine Robert

2009-05-01

Full Text Available Partant de l’hypothèse qu’au cinéma, un plan travaillé à la manière d’un tableau engage, non pas un « arrêt » du récit, mais un enrichissement de la logique narrative linéaire du film par une sémiotique tabulaire et des jeux de références intermédiales, cet article analyse le cas exemplaire et récurrent des plans qui reconstituent en « tableau vivant » La Cène de Léonard de Vinci. Christus (Giulio Antamoro, 1914-1916, Ben Hur, a tale of the Christ (Fred Niblo, 1925 ou Quo Vadis (Mervyn LeRoy, 1951 y sont explorés, ainsi que d’autres productions qui replacent la composition du Cenacolo à la fois en une « phase » et une « stase » dramatique et esthétique du récit christique. Des films tels que Viridiana (Luis Buñuel, 1961 sont aussi évoqués, qui font apparaître la composition comme une pause allégorique d’un récit contemporain, enrichi sur un plan énonciatif, symbolique et iconographique.Based on the hypothesis that in the cinema, a shot worked in the style of a picture doesn’t “stop” the storyline but expands the linear narrative with tabular semiotics and artistic references, this article analyzes the exemplary and recurring case of the shots which reconstitute Leonardo da Vinci’s Last Supper as a “living picture”. Christus (Giulio Antamoro, 1914-1916, Ben Hur, a tale of the Christ (Fred Niblo, 1925, Quo Vadis (Mervyn LeRoy, 1951 and other movies are investigated, that replace the famous Cenacolo as both a phase and a stasis of the Christlike narrative. Films like Viridiana (Luis Buñuel, 1961 are mentioned too, where da Vinci’s composition occurs like an allegorical extension of a contemporary story, enriched both symbolically and iconographically.

14 CFR 415.7 - Payload determination.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Payload determination. 415.7 Section 415.7... TRANSPORTATION LICENSING LAUNCH LICENSE General § 415.7 Payload determination. A payload determination is... determination. Either a launch license applicant or a payload owner or operator may request a review of its...

Payload crew activity planning integration. Task 2: Inflight operations and training for payloads

Science.gov (United States)

Hitz, F. R.

1976-01-01

The primary objectives of the Payload Crew Activity Planning Integration task were to: (1) Determine feasible, cost-effective payload crew activity planning integration methods. (2) Develop an implementation plan and guidelines for payload crew activity plan (CAP) integration between the JSC Orbiter planners and the Payload Centers. Subtask objectives and study activities were defined as: (1) Determine Crew Activity Planning Interfaces. (2) Determine Crew Activity Plan Type and Content. (3) Evaluate Automated Scheduling Tools. (4) Develop a draft Implementation Plan for Crew Activity Planning Integration. The basic guidelines were to develop a plan applicable to the Shuttle operations timeframe, utilize existing center resources and expertise as much as possible, and minimize unnecessary data exchange not directly productive in the development of the end-product timelines.

Prevalence vybraných vrozených vad v České republice – vývojové vady centrálního nervového systému a zažívacího traktu

Czech Academy of Sciences Publication Activity Database

Šípek, A.; Gregor, V.; Horáček, J.; Šípek jr., A.; Klaschka, Jan; Malý, Marek

2015-01-01

Roč. 64, č. 1 (2015), s. 47-53 ISSN 1210-7913 Institutional support: RVO:67985807 Keywords : defekty neurální trubice * vrozený hydrocefalus * defekty břišní stěny * vrozené vady jícnu * anorektální malformace * kongenitální diafragmatická hernie Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 0.268, year: 2015

[Status quo and progress of Chinese acupuncture in Algeria].

Science.gov (United States)

Huang, Yisheng

2015-10-01

The development of Chinese acupuncture in Algeria and realistic working status in recent years is in- troduced. From five aspects, including general condition of acupuncture in Algeria, clinical application and analysis, of acupuncture, promotion and publicity of acupuncture, existing problem and deficiency, and awards and honor, the status quo and progress of Chinese acupuncture in Algeria are discussed in detail.

Quo vadis Inhaltserschließung der Deutschen Nationalbibliothek? Herausforderungen und Perspektiven

Directory of Open Access Journals (Sweden)

Ulrike Junger

2015-03-01

Full Text Available Seit der Ausweitung des Pflichtexemplarrechts auf sog. unkörperliche Medienwerke im Jahr 2006 steht die Deutsche Nationalbibliothek (DNB vor der Herausforderung, über neue Wege zur Erzeugung bibliografischer Metadaten nachzudenken. Die steigende Menge an Publikationen, die es zu bearbeiten gilt, aber auch deren zunehmende Diversität, machen dies erforderlich. Für die Inhaltserschließung der DNB bedeutet das, dass andere Verfahren neben die intellektuelle Erschließung treten müssen. Die Entwicklung und Einführung automatischer Verfahren für Klassifikation und Beschlagwortung gehören ebenso dazu wie die Nutzung von Fremddaten oder die Gewinnung inhaltserschließender Daten über Konkordanzen. Dies hat Auswirkungen auf Arbeitsabläufe, Erschließungsinstrumente und -standards sowie Datenformate. Die DNB strebt ein Konzept für die Inhaltserschließung an, das zum Ziel hat, so viele Publikationen als möglich angemessen zu erschließen, um thematische Recherchen erfolgreich zu unterstützen. Since the extension of the legal deposit mandate to so-called non-physical publications in 2006, the Deutsche Nationalbibliothek (DNB has to deal with the challenge of finding new ways to create bibliographic metadata. This is due to the growing amount of publications and their increasing diversity. Consequently, in the area of subject cataloguing in DNB, intellectual cataloguing must be complemented by additional methods. These include the development and implementation of automated procedures for classification and indexing as well as the use of third party data or the production of subject data via mappings. All this has effects on the workflows, tools and standards for subject cataloguing and data formats. DNB aims at a concept for subject cataloguing which will make it possible to catalogue as many publications as possible in an appropriate way in order to successfully support topical searches

Two Decades after the Rio Earth Summit: Sustainable Development Quo Vadis?

Directory of Open Access Journals (Sweden)

Korinna Horta

2011-01-01

Full Text Available The world’s most influential development agency, the World Bank Group (WBG, is the leading actor in development finance and plays a central role in global efforts to protect the environment. Following the Rio Earth Summit in 1992, the institution was responsible for all investment projects of the Global Environment Facility (GEF, which was then newly established to serve as the interim financial mechanism for the United Nations Conventions on Climate Change and Biodiversity. The promise that the GEF would lead to the “greening” of development finance remains largely unfulfilled.More recently the United Nations Framework Convention on Climate Change appointed the WBG as the interim trustee of the new Green Climate Fund which plans to mobilize an estimated US$ 100 billion per year by 2020.While the World Bank Group plays this critical role in global environmental efforts, its main business continues to be lending for development. This includes the financing of large-scale infrastructure projects, agribusiness, large dams as well as investments in gas, oil and mining. This regular lending portfolio for development is often at odds with environmental sustainability. For example, despite the growing area of climate finance, support for fossil fuel projects continues to be dominant in the institution’s lending for the energy sector. Another climate-related area is the World Bank’s pioneering role in advancing REDD+, an initiative designed to reduce the emission of global green house gases by integrating efforts to protect forest areas into global carbon markets. Ultimately, its success will depend on addressing sensitive questions such as land ownership, forest governance and the equitable sharing of benefits.In conclusion the paper considers the underlying corporate culture and the difficulties in reconciling environmental and social sustainability with the institution’s supply-side driven focus on meeting lending targets.

Radiolabelled polymeric materials for imaging and treatment of cancer: Quo vadis?

Czech Academy of Sciences Publication Activity Database

Pant, K.; Sedláček, Ondřej; Nadar, R. A.; Hrubý, Martin; Stephan, H.

2017-01-01

Roč. 6, č. 6 (2017), s. 1-31, č. článku 1601115. ISSN 2192-2640 R&D Projects: GA ČR(CZ) GA16-02870S; GA ČR(CZ) GA16-03156S; GA MZd(CZ) NV16-30544A; GA MZd(CZ) NV15-25781A Institutional support: RVO:61389013 Keywords : polymers * cancer * radiodiagnosis Subject RIV: FR - Pharmacology ; Medidal Chemistry OBOR OECD: Pharmacology and pharmacy Impact factor: 5.110, year: 2016

Universal Payload Information Management

Science.gov (United States)

Elmore, Ralph B.

2003-01-01

As the overall manager and integrator of International Space Station (ISS) science payloads, the Payload Operations Integration Center (POIC) at Marshall Space Flight Center has a critical need to provide an information management system for exchange and control of ISS payload files as well as to coordinate ISS payload related operational changes. The POIC's information management system has a fundamental requirement to provide secure operational access not only to users physically located at the POIC, but also to remote experimenters and International Partners physically located in different parts of the world. The Payload Information Management System (PIMS) is a ground-based electronic document configuration management and collaborative workflow system that was built to service the POIC's information management needs. This paper discusses the application components that comprise the PIMS system, the challenges that influenced its design and architecture, and the selected technologies it employs. This paper will also touch on the advantages of the architecture, details of the user interface, and lessons learned along the way to a successful deployment. With PIMS, a sophisticated software solution has been built that is not only universally accessible for POIC customer s information management needs, but also universally adaptable in implementation and application as a generalized information management system.

14 CFR 1214.305 - Payload specialist responsibilities.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Payload specialist responsibilities. 1214... Payload Specialists for Space Transportation System (STS) Missions § 1214.305 Payload specialist... commander has ultimate responsibility and authority for all assigned crew duties. The payload specialist is...

'Secret' Shuttle payloads revealed

Science.gov (United States)

Powell, Joel W.

1993-05-01

A secret military payload carried by the orbiter Discovery launched on January 24 1985 is discussed. Secondary payloads on the military Shuttle flights are briefly reviewed. Most of the military middeck experiments were sponsored by the Space Test Program established at the Pentagon to oversee all Defense Department space research projects.

14 CFR 1214.119 - Spacelab payloads.

Science.gov (United States)

2010-01-01

... occurs less than 18 months before launch, the fees will be computed by linear interpolation using the...) Providing payload-unique software for use during ground processing, on orbit or in POCC operations. (vi...) Payload electrical power. (8) Payload environmental control. (9) On-board data acquisition and processing...

Can decision biases improve insurance outcomes? An experiment on status quo bias in health insurance choice.

Science.gov (United States)

Krieger, Miriam; Felder, Stefan

2013-06-19

Rather than conforming to the assumption of perfect rationality in neoclassical economic theory, decision behavior has been shown to display a host of systematic biases. Properly understood, these patterns can be instrumentalized to improve outcomes in the public realm. We conducted a laboratory experiment to study whether decisions over health insurance policies are subject to status quo bias and, if so, whether experience mitigates this framing effect. Choices in two treatment groups with status quo defaults are compared to choices in a neutrally framed control group. A two-step design features sorting of subjects into the groups, allowing us to control for selection effects due to risk preferences. The results confirm the presence of a status quo bias in consumer choices over health insurance policies. However, this effect of the default framing does not persist as subjects repeat this decision in later periods of the experiment. Our results have implications for health care policy, for example suggesting that the use of non-binding defaults in health insurance can facilitate the spread of co-insurance policies and thereby help contain health care expenditure.

On locating steganographic payload using residuals

Science.gov (United States)

Quach, Tu-Thach

2011-02-01

Locating steganographic payload usingWeighted Stego-image (WS) residuals has been proven successful provided a large number of stego images are available. In this paper, we revisit this topic with two goals. First, we argue that it is a promising approach to locate payload by showing that in the ideal scenario where the cover images are available, the expected number of stego images needed to perfectly locate all load-carrying pixels is the logarithm of the payload size. Second, we generalize cover estimation to a maximum likelihood decoding problem and demonstrate that a second-order statistical cover model can be used to compute residuals to locate payload embedded by both LSB replacement and LSB matching steganography.

Advanced APS Impacts on Vehicle Payloads

Science.gov (United States)

Schneider, Steven J.; Reed, Brian D.

1989-01-01

Advanced auxiliary propulsion system (APS) technology has the potential to both, increase the payload capability of earth-to-orbit (ETO) vehicles by reducing APS propellant mass, and simplify ground operations and logistics by reducing the number of fluids on the vehicle and eliminating toxic, corrosive propellants. The impact of integrated cryogenic APS on vehicle payloads is addressed. In this system, launch propulsion system residuals are scavenged from integral launch propulsion tanks for use in the APS. Sufficient propellant is preloaded into the APS to return to earth with margin and noncomplete scavenging assumed. No propellant conditioning is required by the APS, but ambient heat soak is accommodated. High temperature rocket materials enable the use of the unconditioned hydrogen/oxygen in the APS and are estimated to give APS rockets specific impulse of up to about 444 sec. The payload benefits are quantified and compared with an uprated monomethyl hydrazine/nitrogen tetroxide system in a conservative fashion, by assuming a 25.5 percent weight growth for the hydrogen/oxygen system and a 0 percent weight growth for the uprated system. The combination and scavenging and high performance gives payload impacts which are highly mission specific. A payload benefit of 861 kg (1898 lbm) was estimated for a Space Station Freedom rendezvous mission and 2099 kg (4626 lbm) for a sortie mission, with payload impacts varying with the amount of launch propulsion residual propellants. Missions without liquid propellant scavenging were estimated to have payload penalties, however, operational benefits were still possible.

Can Decision Biases Improve Insurance Outcomes? An Experiment on Status Quo Bias in Health Insurance Choice

Science.gov (United States)

Krieger, Miriam; Felder, Stefan

2013-01-01

Rather than conforming to the assumption of perfect rationality in neoclassical economic theory, decision behavior has been shown to display a host of systematic biases. Properly understood, these patterns can be instrumentalized to improve outcomes in the public realm. We conducted a laboratory experiment to study whether decisions over health insurance policies are subject to status quo bias and, if so, whether experience mitigates this framing effect. Choices in two treatment groups with status quo defaults are compared to choices in a neutrally framed control group. A two-step design features sorting of subjects into the groups, allowing us to control for selection effects due to risk preferences. The results confirm the presence of a status quo bias in consumer choices over health insurance policies. However, this effect of the default framing does not persist as subjects repeat this decision in later periods of the experiment. Our results have implications for health care policy, for example suggesting that the use of non-binding defaults in health insurance can facilitate the spread of co-insurance policies and thereby help contain health care expenditure. PMID:23783222

Can Decision Biases Improve Insurance Outcomes? An Experiment on Status Quo Bias in Health Insurance Choice

Directory of Open Access Journals (Sweden)

Stefan Felder

2013-06-01

Full Text Available Rather than conforming to the assumption of perfect rationality in neoclassical economic theory, decision behavior has been shown to display a host of systematic biases. Properly understood, these patterns can be instrumentalized to improve outcomes in the public realm. We conducted a laboratory experiment to study whether decisions over health insurance policies are subject to status quo bias and, if so, whether experience mitigates this framing effect. Choices in two treatment groups with status quo defaults are compared to choices in a neutrally framed control group. A two-step design features sorting of subjects into the groups, allowing us to control for selection effects due to risk preferences. The results confirm the presence of a status quo bias in consumer choices over health insurance policies. However, this effect of the default framing does not persist as subjects repeat this decision in later periods of the experiment. Our results have implications for health care policy, for example suggesting that the use of non-binding defaults in health insurance can facilitate the spread of co-insurance policies and thereby help contain health care expenditure.

26 CFR 1.6115-1 - Disclosure requirements for quid pro quo contributions.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 13 2010-04-01 2010-04-01 false Disclosure requirements for quid pro quo contributions. 1.6115-1 Section 1.6115-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY... unique qualities of the goods or services that are being valued. (3) Examples. The following examples...

Design of Smart Multi-Functional Integrated Aviation Photoelectric Payload

Science.gov (United States)

Zhang, X.

2018-04-01

To coordinate with the small UAV at reconnaissance mission, we've developed a smart multi-functional integrated aviation photoelectric payload. The payload weighs only 1kg, and has a two-axis stabilized platform with visible task payload, infrared task payload, laser pointers and video tracker. The photoelectric payload could complete the reconnaissance tasks above the target area (including visible and infrared). Because of its light weight, small size, full-featured, high integrated, the constraints of the UAV platform carrying the payload will be reduced a lot, which helps the payload suit for more extensive using occasions. So all users of this type of smart multi-functional integrated aviation photoelectric payload will do better works on completion of the ground to better pinpoint targets, artillery calibration, assessment of observe strike damage, customs officials and other tasks.

A Trajectory Generation Approach for Payload Directed Flight

Science.gov (United States)

Ippolito, Corey A.; Yeh, Yoo-Hsiu

2009-01-01

Presently, flight systems designed to perform payload-centric maneuvers require preconstructed procedures and special hand-tuned guidance modes. To enable intelligent maneuvering via strong coupling between the goals of payload-directed flight and the autopilot functions, there exists a need to rethink traditional autopilot design and function. Research into payload directed flight examines sensor and payload-centric autopilot modes, architectures, and algorithms that provide layers of intelligent guidance, navigation and control for flight vehicles to achieve mission goals related to the payload sensors, taking into account various constraints such as the performance limitations of the aircraft, target tracking and estimation, obstacle avoidance, and constraint satisfaction. Payload directed flight requires a methodology for accurate trajectory planning that lets the system anticipate expected return from a suite of onboard sensors. This paper presents an extension to the existing techniques used in the literature to quickly and accurately plan flight trajectories that predict and optimize the expected return of onboard payload sensors.

Quo Vadis, Informatics Education?--Towards a More Up-to-Date Informatics Education

Science.gov (United States)

Zsakó, László; Horváth, Gyozo

2017-01-01

Informatics education has been in a cul-de-sac for several years (not only in Hungary), being less and less able to meet the needs of the industry and higher education. In addition, the latest PISA survey shows that--to put it a little strongly--the majority of the x-, y- and z generations are digital illiterates. The aim of this paper to examine…

Corporate Social Responsibility Quo Vadis? A Critical Inquiry into a Discursive Struggle

NARCIS (Netherlands)

Jonker, J.; Marberg, A.L.; McIntosh, M.

2015-01-01

This contribution will start with a brief introduction of CSR and the debate surrounding it. We outline the development of the CSR movement, highlighting four trends over the last 30 years. Next, we touch on the concepts of discourse and paradigm which leads to the conclusion that the CSR debate can

Medical physics education after the ISCO listing of the profession - Quo Vadis?

International Nuclear Information System (INIS)

Tabakov, S.

2012-01-01

The inclusion of Medical Physics in the International Standard Classification of Occupations (ISCO-08) underlines the increased significance of the profession. This opens new horizons, but also challenges in front of the profession. One of these is the need for re-organisation of the medical physics education. Some Universities already open under-graduate (BSc) courses on medical physics in order to accommodate the increased volume of professional knowledge. The paper discusses briefly the background of this trend and presents the urgent need of a wide professional discussion on the matter. (author)

A prospect at 11th international Toki conference. Plasma physics, quo vadis?

International Nuclear Information System (INIS)

Itoh, Kimitaka

2001-01-01

A prospect of plasma physics at the turn of next century is discussed. The theme of this conference identifies the future direction of the research related with plasmas. Main issue is the potential and structure formation in plasmas; More specifically, structures which are realized through the interaction of electromagnetic fields, in particular that with electric fields, in non-equilibrium state. An emphasis is made to clarify the fundamental physics aspects of the plasma physics in fusion research as well as that in the basic research of plasmas. The plasma physics will give an important contribution to the solution of the historical enigma, i.e., all things flow. Having an impact on human recognition of nature and showing a beauty in a law, the plasma physics/science will demonstrate to be a leading science in the 21st century. (author)

QUO VADIS? A ÉTICA PSICANALÍTICA PARA ALÉM DE ROMA

Directory of Open Access Journals (Sweden)

Mariana Rodrigues Festucci Ferreira

2014-01-01

Full Text Available This paper addresses some nuances of the tragedy experienced by Antigone, contrasting it with the annihilation of the contemporary subject operated by the capitalist discourse. It states, beyond the ethics that seeks a good in accordance to the Kantian imperative, the psychoanalytic ethics –an ethics governed by the dialectics of desire, the only one possible to be determined in the analyst's praxis. For this purpose, it starts from Aristotle's concept of Ethics and then it points out what is at stake in Lacan's reading of Sophocles' play. The tragic nature of psychoanalytic ethics is here highlighted along with its relevance to rescue the contemporary subject from deletion

Quo vadis radiotherapy? Technological advances and the rising problems in cancer management.

Science.gov (United States)

Allen, Barry J; Bezak, Eva; Marcu, Loredana G

2013-01-01

Despite the latest technological advances in radiotherapy, cancer control is still challenging for several tumour sites. The survival rates for the most deadly cancers, such as ovarian and pancreatic, have not changed over the last decades. The solution to the problem lies in the change of focus: from local treatment to systemic therapy. The aim of this paper is to present the current status as well as the gaps in radiotherapy and, at the same time, to look into potential solutions to improve cancer control and survival. The currently available advanced radiotherapy treatment techniques have been analysed and their cost-effectiveness discussed. The problem of systemic disease management was specifically targeted. Clinical studies show limited benefit in cancer control from hadron therapy. However, targeted therapies together with molecular imaging could improve treatment outcome for several tumour sites while controlling the systemic disease. The advances in photon therapy continue to be competitive with the much more expensive hadron therapy. To justify the cost effectiveness of proton/heavy ion therapy, there is a need for phase III randomised clinical trials. Furthermore, the success of systemic disease management lies in the fusion between radiation oncology technology and microbiology.

Nóesis: un oasis intelectual en el desierto chihuahuense

Directory of Open Access Journals (Sweden)

Luis Antonio Payán Alvarado

2009-01-01

Full Text Available Durante dos décadas, la revista académica Nóesis ha sido uno de los oasis intelectuales de la investigación científica social en el estado de Chihuahua. Su trayectoria durante estos veinte años constituye, primero, un reconocimiento de nuestro rezago en la indagación científica dentro de las ciencias sociales y, segundo, un compromiso importante para subsanar nuestras deficiencias en este terreno. El presente ensayo formula tres preguntas importantes a fin de explorar la trayectoria de Nóesis: Unde venis?, Ubi es?, y Quo vadis?, mediante las cuales se pretende explorar brevemente el pasado, el presente, y el futuro de la revista, dadas las condiciones actuales de la comunidad epistémica de la Universidad Autónoma de Ciudad Juárez, del estado de Chihuahua y de la región norte de México.

The endowment effect, status quo bias and loss aversion: rational alternative explanation

NARCIS (Netherlands)

Dupont, D.Y.; Lee, Gabriel S.

2002-01-01

The endowment effect, status quo bias, and loss aversion are robust and well documented results from experimental psychology. They introduce a wedge between the prices at which one is willing to sell or buy a good. The objective of this paper is to address this wedge. We show that the presence of

The endowment effect, status quo bias and loss aversion : rational alternative explanation

NARCIS (Netherlands)

Dupont, D.Y.; Lee, G.S.

2002-01-01

The endowment effect, status quo bias, and loss aversion are robust and well documented results from experimental psychology. They introduce a wedge between the prices at which one is willing to sell or buy a good. The objective of this paper is to address this wedge. We show that the presence of

Amine Swingbed Payload Project Management

Science.gov (United States)

Walsch, Mary; Curley, Su

2013-01-01

The International Space Station (ISS) has been designed as a laboratory for demonstrating technologies in a microgravity environment, benefitting exploration programs by reducing the overall risk of implementing such technologies in new spacecraft. At the beginning of fiscal year 2010, the ISS program manager requested that the amine-based, pressure-swing carbon dioxide and humidity absorption technology (designed by Hamilton Sundstrand, baselined for the Orion Multi-Purpose Crew Vehicle, and tested at the Johnson Space Center in relevant environments, including with humans, since 2005) be developed into a payload for ISS Utilization. In addition to evaluating the amine technology in a flight environment before the first launch of the Orion vehicle, the ISS program wanted to determine the capability of the amine technology to remove carbon dioxide from the ISS cabin environment at the metabolic rate of the full 6 ]person crew. Because the amine technology vents the absorbed carbon dioxide and water vapor to space vacuum (open loop), additional hardware needed to be developed to minimize the amount of air and water resources lost overboard. Additionally, the payload system would be launched on two separate Space Shuttle flights, with the heart of the payload-the swingbed unit itself-launching a full year before the remainder of the payload. This paper discusses the project management and challenges of developing the amine swingbed payload in order to accomplish the technology objectives of both the open -loop Orion application as well as the closed-loop ISS application.

Towards telecommunication payloads with photonic technologies

Science.gov (United States)

Vono, S.; Di Paolo, G.; Piccinni, M.; Pisano, A.; Sotom, M.; Aveline, M.; Ginestet, P.

2017-11-01

In the last decade, Thales Alenia Space has put a lot of its research effort on Photonic Technologies for Space Application with the aim to offer the market satellite telecommunication systems better performance and lower costs. This research effort has been concentrated on several activities, some of them sponsored by ESA. Most promising applications refer to Payload Systems. In particular, photonic payload applications have been investigated through the following two ESA studies: Artes-1 "Next Generation Telecommunication Payloads based on Photonic Technologies" and Artes-5 "OWR - Optical Wideband Receiver" activities.

Space vehicle with customizable payload and docking station

Science.gov (United States)

Judd, Stephen; Dallmann, Nicholas; McCabe, Kevin; Seitz, Daniel

2018-01-30

A "black box" space vehicle solution may allow a payload developer to define the mission space and provide mission hardware within a predetermined volume and with predetermined connectivity. Components such as the power module, radios and boards, attitude determination and control system (ADCS), command and data handling (C&DH), etc. may all be provided as part of a "stock" (i.e., core) space vehicle. The payload provided by the payload developer may be plugged into the space vehicle payload section, tested, and launched without custom development of core space vehicle components by the payload developer. A docking station may facilitate convenient development and testing of the space vehicle while reducing handling thereof.

Cost benefit analysis of two policy options for cannabis: status quo and legalisation.

Science.gov (United States)

Shanahan, Marian; Ritter, Alison

2014-01-01

To date there has been limited analysis of the economic costs and benefits associated with cannabis legalisation. This study redresses this gap. A cost benefit analysis of two cannabis policy options the status quo (where cannabis use is illegal) and a legalised-regulated option was conducted. A cost benefit analysis was used to value the costs and benefits of the two policies in monetary terms. Costs and benefits of each policy option were classified into five categories (direct intervention costs, costs or cost savings to other agencies, benefits or lost benefits to the individual or the family, other impacts on third parties, and adverse or spill over events). The results are expressed as a net social benefit (NSB). The mean NSB per annum from Monte Carlo simulations (with the 5 and 95 percentiles) for the status quo was $294.6 million AUD ($201.1 to $392.7 million) not substantially different from the $234.2 million AUD ($136.4 to $331.1 million) for the legalised-regulated model which excludes government revenue as a benefit. When government revenue is included, the NSB for legalised-regulated is higher than for status quo. Sensitivity analyses demonstrate the significant impact of educational attainment and wellbeing as drivers for the NSB result. Examining the percentiles around the two policy options, there appears to be no difference between the NSB for these two policy options. Economic analyses are essential for good public policy, providing information about the extent to which one policy is substantially economically favourable over another. In cannabis policy, for these two options this does not appear to be the case.

Cost benefit analysis of two policy options for cannabis: status quo and legalisation.

Directory of Open Access Journals (Sweden)

Marian Shanahan

Full Text Available AIMS: To date there has been limited analysis of the economic costs and benefits associated with cannabis legalisation. This study redresses this gap. A cost benefit analysis of two cannabis policy options the status quo (where cannabis use is illegal and a legalised-regulated option was conducted. METHOD: A cost benefit analysis was used to value the costs and benefits of the two policies in monetary terms. Costs and benefits of each policy option were classified into five categories (direct intervention costs, costs or cost savings to other agencies, benefits or lost benefits to the individual or the family, other impacts on third parties, and adverse or spill over events. The results are expressed as a net social benefit (NSB. FINDINGS: The mean NSB per annum from Monte Carlo simulations (with the 5 and 95 percentiles for the status quo was $294.6 million AUD ($201.1 to $392.7 million not substantially different from the $234.2 million AUD ($136.4 to $331.1 million for the legalised-regulated model which excludes government revenue as a benefit. When government revenue is included, the NSB for legalised-regulated is higher than for status quo. Sensitivity analyses demonstrate the significant impact of educational attainment and wellbeing as drivers for the NSB result. CONCLUSION: Examining the percentiles around the two policy options, there appears to be no difference between the NSB for these two policy options. Economic analyses are essential for good public policy, providing information about the extent to which one policy is substantially economically favourable over another. In cannabis policy, for these two options this does not appear to be the case.

Education Payload Operation - Kit D

Science.gov (United States)

Keil, Matthew

2009-01-01

Education Payload Operation - Kit D (EPO-Kit D) includes education items that will be used to support the live International Space Station (ISS) education downlinks and Education Payload Operation (EPO) demonstrations onboard the ISS. The main objective of EPO-Kit D supports the National Aeronautics and Space Administration (NASA) goal of attracting students to study and seek careers in science, technology, engineering, and mathematics.

A Cubesat Payload for Exoplanet Detection

Directory of Open Access Journals (Sweden)

Marcella Iuzzolino

2017-03-01

Full Text Available The search for undiscovered planets outside the solar system is a scientific topic that is rapidly spreading into the astrophysical and engineering communities. In this framework, the design of an innovative payload to detect exoplanets from a nano-sized space platform, like a 3U cubesat, is presented. The selected detection method is photometric transit, and the payload aims to detect flux decrements down to ~0.01% with a precision of 12 ppm. The payload design is also aimed at false positive recognition. The solution consists of a four-facets pyramid on the top of the payload, to allow for measurement redundancy and low-resolution spectral dispersion of the star images. The innovative concept is the use of a small and cheap platform for a relevant astronomical mission. The faintest observable target star has V-magnitude equal to 3.38. Despite missions aimed at ultra-precise photometry from microsatellites (e.g., MOST, BRITE, the transit of exoplanets orbiting very bright stars has not yet been surveyed photometrically from space, since any observation from a small/medium sized (30 cm optical aperture telescope would saturate the detector. This cubesat mission can provide these missing measurements. This work is set up as a demonstrative project to verify the feasibility of the payload concept.

EUVS Sounding Rocket Payload

Science.gov (United States)

Stern, Alan S.

1996-01-01

During the first half of this year (CY 1996), the EUVS project began preparations of the EUVS payload for the upcoming NASA sounding rocket flight 36.148CL, slated for launch on July 26, 1996 to observe and record a high-resolution (approx. 2 A FWHM) EUV spectrum of the planet Venus. These preparations were designed to improve the spectral resolution and sensitivity performance of the EUVS payload as well as prepare the payload for this upcoming mission. The following is a list of the EUVS project activities that have taken place since the beginning of this CY: (1) Applied a fresh, new SiC optical coating to our existing 2400 groove/mm grating to boost its reflectivity; (2) modified the Ranicon science detector to boost its detective quantum efficiency with the addition of a repeller grid; (3) constructed a new entrance slit plane to achieve 2 A FWHM spectral resolution; (4) prepared and held the Payload Initiation Conference (PIC) with the assigned NASA support team from Wallops Island for the upcoming 36.148CL flight (PIC held on March 8, 1996; see Attachment A); (5) began wavelength calibration activities of EUVS in the laboratory; (6) made arrangements for travel to WSMR to begin integration activities in preparation for the July 1996 launch; (7) paper detailing our previous EUVS Venus mission (NASA flight 36.117CL) published in Icarus (see Attachment B); and (8) continued data analysis of the previous EUVS mission 36.137CL (Spica occultation flight).

Balloonborne lidar payloads for remote sensing

Science.gov (United States)

Shepherd, O.; Aurilio, G.; Hurd, A. G.; Rappaport, S. A.; Reidy, W. P.; Rieder, R. J.; Bedo, D. E.; Swirbalus, R. A.

1994-02-01

A series of lidar experiments has been conducted using the Atmospheric Balloonborne Lidar Experiment payload (ABLE). These experiments included the measurement of atmospheric Rayleigh and Mie backscatter from near space (approximately 30 km) and Raman backscatter measurements of atmospheric constituents as a function of altitude. The ABLE payload consisted of a frequency-tripled Nd:YAG laser transmitter, a 50 cm receiver telescope, and filtered photodetectors in various focal plane configurations. The payload for lidar pointing, thermal control, data handling, and remote control of the lidar system. Comparison of ABLE performance with that of a space lidar shows significant performance advantages and cost effectiveness for balloonborne lidar systems.

Large Payload Ground Transportation and Test Considerations

Science.gov (United States)

Rucker, Michelle A.

2016-01-01

Many spacecraft concepts under consideration by the National Aeronautics and Space Administration’s (NASA’s) Evolvable Mars Campaign take advantage of a Space Launch System payload shroud that may be 8 to 10 meters in diameter. Large payloads can theoretically save cost by reducing the number of launches needed--but only if it is possible to build, test, and transport a large payload to the launch site in the first place. Analysis performed previously for the Altair project identified several transportation and test issues with an 8.973 meters diameter payload. Although the entire Constellation Program—including Altair—has since been canceled, these issues serve as important lessons learned for spacecraft designers and program managers considering large payloads for future programs. A transportation feasibility study found that, even broken up into an Ascent and Descent Module, the Altair spacecraft would not fit inside available aircraft. Ground transportation of such large payloads over extended distances is not generally permitted, so overland transportation alone would not be an option. Limited ground transportation to the nearest waterway may be possible, but water transportation could take as long as 67 days per production unit, depending on point of origin and acceptance test facility; transportation from the western United States would require transit through the Panama Canal to access the Kennedy Space Center launch site. Large payloads also pose acceptance test and ground processing challenges. Although propulsion, mechanical vibration, and reverberant acoustic test facilities at NASA’s Plum Brook Station have been designed to accommodate large spacecraft, special handling and test work-arounds may be necessary, which could increase cost, schedule, and technical risk. Once at the launch site, there are no facilities currently capable of accommodating the combination of large payload size and hazardous processing such as hypergolic fuels

Control system and method for payload control in mobile platform cranes

Science.gov (United States)

Robinett, III, Rush D.; Groom, Kenneth N.; Feddema, John T.; Parker, Gordon G.

2002-01-01

A crane control system and method provides a way to generate crane commands responsive to a desired payload motion to achieve substantially pendulation-free actual payload motion. The control system and method apply a motion compensator to maintain a payload in a defined payload configuration relative to an inertial coordinate frame. The control system and method can further comprise a pendulation damper controller to reduce an amount of pendulation between a sensed payload configuration and the defined payload configuration. The control system and method can further comprise a command shaping filter to filter out a residual payload pendulation frequency from the desired payload motion.

Energy and emissions trading. Proceedings; Energie und Klimawandel. Tagungsband

Energy Technology Data Exchange (ETDEWEB)

Ehlers, Dirk; Wolffgang, Hans-Michael; Schroeder, Ulrich Jan (eds.)

2010-07-01

Within the 14th Muensteraner Foreign Trade legislation conference at 15th and 16th October, 2009 in Muenster (Federal Republic of Germany), the following lectures were held: (1) National and European energy policy (Dieter Kunhenn); (2) Trade, transport and distribution of energy - actual and future legal aspects (Markus J. Kachel); (3) Liberalization and regulation of energy services at multilateral and bilateral level (Christian Pitschas); (4) Legal protection for foreign direct investigations in the energy sector (Richard Kreindler); (5) Energy cartels in the light of the WTO law (Joerg Philipp Terhechte); (6) Subsidisation of renewable energy in the area of attention between WTO and EU subsidy law (Martin Lukas); (7) Legal aspects of pipeline through the Baltic Sea (Barbara Kaech); (8) Sustainability standards and their compatibility with the WTO law (Lorenz Franken); (9) Economic instruments between Kyoto and Kopenhagen - Quo vadis climate protection? (Benjamin Goeerlach); (10) Emissions rights trading with developing countries (Peter Ebsen); (11) Legal aspects of the European emissions rights trading (Stefan Altenschmidt).

The Potential for Hosted Payloads at NASA

Science.gov (United States)

Andraschko, Mark; Antol, Jeffrey; Baize, Rosemary; Horan, Stephen; Neil, Doreen; Rinsland, Pamela; Zaiceva, Rita

2012-01-01

The 2010 National Space Policy encourages federal agencies to actively explore the use of inventive, nontraditional arrangements for acquiring commercial space goods and services to meet United States Government requirements, including...hosting government capabilities on commercial spacecraft. NASA's Science Mission Directorate has taken an important step towards this goal by adding an option for hosted payload responses to its recent Announcement of Opportunity (AO) for Earth Venture-2 missions. Since NASA selects a significant portion of its science missions through a competitive process, it is useful to understand the implications that this process has on the feasibility of successfully proposing a commercially hosted payload mission. This paper describes some of the impediments associated with proposing a hosted payload mission to NASA, and offers suggestions on how these impediments might be addressed. Commercially hosted payloads provide a novel way to serve the needs of the science and technology demonstration communities at a fraction of the cost of a traditional Geostationary Earth Orbit (GEO) mission. The commercial communications industry launches over 20 satellites to GEO each year. By exercising this repeatable commercial paradigm of privately financed access to space with proven vendors, NASA can achieve science goals at a significantly lower cost than the current dedicated spacecraft and launch vehicle approach affords. Commercial hosting could open up a new realm of opportunities for NASA science missions to make measurements from GEO. This paper also briefly describes two GEO missions recommended by the National Academies of Science Earth Science Decadal Survey, the Geostationary Coastal and Air Pollution Events (GEO-CAPE) mission and the Precipitation and All-weather Temperature and Humidity (PATH) mission. Hosted payload missions recently selected for implementation by the Office of the Chief Technologist are also discussed. Finally, there are

The status quo, problems and improvements pertaining to radiation source management in China

International Nuclear Information System (INIS)

Jin Jiaqi

1998-01-01

Early in 1930s, radiation sources were used in medicine in China, and since then their application has been widely extended in a variety of fields. This paper presents a brief outline of the status quo, problems on management for radiation sources, and some relevant improvements as recommended by author are also included in it. (author)

Quid Pro Quo in IPOs: Why Book-Building is Dominating Auctions

OpenAIRE

Degeorge, François; Derrien, Francois; Womack, Kent L

2004-01-01

The book-building procedure for selling initial public offerings to investors has captured significant market share from auction alternatives in recent years, despite significantly lower costs in both direct fees and initial underpricing when using the auction mechanism. This paper shows that in the French market, where the frequency of book-building and auctions was about equal in the 1990s, the ostensible advantages to the issuer using book-building were advertising-related quid pro quo ben...

Approach to Spacelab Payload mission management

Science.gov (United States)

Craft, H. G.; Lester, R. C.

1978-01-01

The nucleus of the approach to Spacelab Payload mission management is the establishment of a single point of authority for the entire payload on a given mission. This single point mission manager will serve as a 'broker' between the individual experiments and the STS, negotiating agreements by two-part interaction. The payload mission manager, along with a small support team, will represent the users in negotiating use of STS accommodations. He will provide the support needed by each individual experimenter to meet the scientific, technological, and applications objectives of the mission with minimum cost and maximum efficiency. The investigator will assume complete responsibility for his experiment hardware definition and development and will take an active role in the integration and operation of his experiment.

Shuttle performance enhancements using an OMS payload bay kit

Science.gov (United States)

Templin, Kevin C.; Mallini, Charles J.

1991-01-01

The study focuses on the use of an orbital maneuvering system (OMS) payload bay kit (PBK) designed to utilize OMS tanks identical to those currently employed in the Orbiter OMS pods. Emphasis is placed on payload deployment capability and payload servicing/reboost capability augmentation from the point of view of payload mass, maximum deployment altitudes, and initial retrieval and final deployment altitudes. The deployment, servicing, and reboost requirements of the Hubble Space Telescope and Advanced X-ray and Astrophysics Facility are analyzed in order to show the benefits an OMS PBK can provide for these missions. It is shown that OMS PBKs can provide the required capability enhancement necessary to support deployment, reboost, and servicing of payloads requiring altitudes greater than 325 nautical miles.

Burnup credit effect on proposed cask payloads

International Nuclear Information System (INIS)

Hall, I.K.

1989-01-01

The purpose of the Cask Systems Development Program (CSDP) is to develop a variety of cask systems which will allow safe and economical movement of commercial spent nuclear fuel and high-level waste from the generator to the Federal repository or Monitored Retrievable Storage (MRS) facility. Program schedule objectives for the initial phase of the CSDP include the development of certified spent fuel cask systems by 1995 to support Office of Civilian Radioactive Waste Management shipments from the utilities beginning in the late 1990s. Forty-nine proposals for developing a family of spent fuel casks were received and comparisons made. General conclusions that can be drawn from the comparisons are that (1) the new generation of casks will have substantially increased payloads in comparison to current casks, and (2) an even greater payload increase may be achievable with burnup credit. The ranges in the payload estimates do not allow a precise separation of the payload increase attributable to the proposed allowance of fuel burnup credit, as compared wilt the no-burnup-credit case. The beneficial effects of cask payload increases on overall costs and risks of transporting spent fuel are significant; therefore further work aimed toward taking advantage of burnup credit is warranted

[Quo vadis, modern intensive care medicine? Outdated considerations regarding risks and side effects].

Science.gov (United States)

Duttge, G

2016-04-01

Modern intensive care medicine is faced with large challenges which are not solely caused by medical-technical progress, but above all by the demographic and value-related changes of society and its citizens. Thereby, three central problem areas are of particular interest: the fragile effectiveness of a patient's right to self-determination at the end of life, the uncertainties regarding the demarcation of futility, and the question of the influence of economic considerations (rationing) in view of the different levels for the allocation of duties and execution of duties. This article contains the revised version of the lecture from June 18, 2015 on the occasion of the 47th annual joint conference of DGIIN (Deutschen Gesellschaft für Internistische Intensivmedizin und Notfallmedizin) and ÖGIAIN (Österreichischen Gesellschaft für Internistische und Allgemeine Intensivmedizin und Notfallmedizin) on the general subject: "quality and humanity".

Quo Vadis: el español y el Hispanismo en Sudáfrica

OpenAIRE

Maree, Cathy; Sánchez Martín, Carmen

2001-01-01

Not available

Nuestro objetivo en este ensayo es presentar la situación del español y del hispanismo en el complejo mundo que ha sido y sigue siendo Sudáfrica. Con el fin de entender el papel que desempeña el español en el África austral, se traza la historia socio-lingüística sudafricana, la remota y la reciente, como base indispensable para el posterior análisis comparativo del español y las otras lenguas y culturas extranjeras estudiadas en el país. El enfoque entonces p...

Quo Vadis ICDP? The Science Plan of the International Continental Scientific Drilling Program.

Science.gov (United States)

Horsfield, Brian

2014-05-01

The rocks and fluids of our ever-changing planet contain heat, energy, and life as well as archived records of what has gone before. These precious relicts and living systems need to be probed, collected, monitored and analyzed. The science results obtained cover the spectrum of the earth sciences from climate change, natural hazards and earth resources to the origins of life on Earth. The need to drill has never been greater, and this requires improved coordination between the marine, terrestrial and ice-coring communities and the research and private sector communities, effectively addressing the needs of our growing population for energy, sustenance, and quality of life. The ICDP is an infrastructure for scientific drilling that facilitates outstanding science. It is the only international platform for scientific research drilling in terrestrial environments. ICDP brings together scientists and stakeholders from 24 nations to work together at the highest scientific and technical niveaux. More than 30 drilling projects and 55 planning workshops have been supported to date. It is an efficient organisation, run according to the philosophy "lean and mean", with an average annual budget of about 5 million, and further third-party drilling expenditures that more than doubles this yearly investment. Here we report on ICDP's 2013 Science Conference "Imaging the Past to Imagine our Future", held November 11-14, 2013 in Potsdam whose goal was to set the new ICDP Science Plan in motion. New insights into geoprocesses and the identification of hot topics were high on the agenda, and debated in closed sessions, via posters and through oral presentations, and where appropriate dovetailed with socio-economic challenges. The conference was used to strengthen and expand our ties with member countries, and to debate incorporating industry into selected ICDP strategic activities where it makes sense to do so (ICDP remains science-driven). In addition, the conference paved the way for outreach measures to media and policy makers. A White Paper is currently in preparation, and a Special Issue in a leading scientific journal is also underway that will provide a snapshot of the scientific framework within which ICDP operates.

Cyber Crime & Cyber War – "Part of the Game": Cyber Security, Quo Vadis?

Directory of Open Access Journals (Sweden)

Karl H. Stingeder

2015-09-01

Full Text Available Welche Rolle spielt Cyber Crime gegenwärtig? Was unterscheidet Cyber Crime von Cyber War? Wie muss Cyber Security gestaltet sein, um effektiven Schutz nachhaltig zu gewährleisten? Cyber Crime-Aktivitäten kennzeichnen sich häufig durch eine einfache Zugänglichkeit von betrügerischem Know-How und technischen Hilfsmitteln. Bedingt durch eine schleppende und mangelhafte Umsetzung von koordinierten Gegenmaßnahmen, resultieren Cyber-Delikte in einem Low-Risk und High-Reward Szenario für Cyber-Kriminelle. Je organisierter und spezialisierter ein Cyber-Crime-Netzwerk gestaltet ist, desto größer wird das Schadenspotenzial. Cyber Crime ist der Überbegriff für betrügerische Aktivitäten über das Internet. Diese stützen sich auf das Vorbild von "traditionellen" Offline-Kriminalitätsverhaltensmustern, welche durch das technologische Spektrum des Internets einfach zugänglich sind. Nichtsdestoweniger ist es die technische Ausführung der Delikte, die ein wesentliches Unterscheidungsmerkmal zwischen Online- und Offline-Betrug bildet. Auch steht die für organisierte, kriminelle Verbindungen, so auch für Regierungen oder Terrororganisationen geringere Hemmschwelle für eine militärische Instrumentalisierung des Internets im Brennpunkt von Cyber Security. Erfolgen Cyber Crime Aktivitäten unter dem Anspruch der Verfolgung politischer Ziele, sprechen wir von Cyber War. Nachhaltige, gegen Cyber Crime und Cyber War gerichtete Cyber Security-Maßnahmen finden in einem hochdynamischen Umfeld statt. Cyber-Kriminelle sind im Regelfall logistisch und finanziell gut ausgestattet. Viele werden von Regierungen unterstützt. Cyber Crime-Player verfügen über weitreichende technische Fähigkeiten, sodass sie maßgeschneiderte Schadprogramme (Malware für ihre Ziele entwickeln können. Aktuell fehlt vielen Unternehmen und öffentlichen Institutionen das Bewusstsein für die Notwendigkeit von Abwehrsystemen. Ein Cyber Security-Fokus auf Präventivmaßnahmen ist weder ausreichend noch nachhaltig. What roles does cyber crime play today? What differentiates cyber crime from cyber war? How must cyber security be organized in order to effectively ensure sustainable protection? Cyber crime activities are frequently characterized by the easy accessibility of fraudulent know-how and technical means. Due to the sluggish and inadequate implementation of coordinated countermeasures, cyber crimes are a low-risk and high-reward scenario for cyber criminals. The more organized and specialized a cyber crime network, the greater the potential for damage. In fact, cyber crime is the umbrella term for fraudulent activities via the World Wide Web. These rely on the model of "traditional" offline criminal behavior patterns, which are easy to access thanks to the technological spectrum of the Internet. Nonetheless, it is the technical execution of the crime that represents a crucial distinguishing characteristic between online and offline fraud. Furthermore, from the point of view of organized crime, governments and terror groups, a lower inhibition threshold for a military exploitation of the Internet is a focal point of cyber security. As soon as cyber crime activity is the means by which to achieve political goals, it is called cyber war. Sustainable measures directed against cyber crime and cyber war take place in a highly dynamic environment. Cyber criminals are usually well-equipped in terms of logistics and financial resources. Many are supported by governments. Cyber criminals have wide-ranging technical expertise, which enables them to develop customized malware to accomplish their goals. At present, many companies and public sector entities do not fully realize how imperative defense systems are. Cyber security focus on purely preventive measures is therefore neither sufficient nor sustainable.

Cyber Crime & Cyber War – "Part of the Game": Cyber Security, Quo Vadis?

OpenAIRE

Karl H. Stingeder

2015-01-01

Welche Rolle spielt Cyber Crime gegenwärtig? Was unterscheidet Cyber Crime von Cyber War? Wie muss Cyber Security gestaltet sein, um effektiven Schutz nachhaltig zu gewährleisten? Cyber Crime-Aktivitäten kennzeichnen sich häufig durch eine einfache Zugänglichkeit von betrügerischem Know-How und technischen Hilfsmitteln. Bedingt durch eine schleppende und mangelhafte Umsetzung von koordinierten Gegenmaßnahmen, resultieren Cyber-Delikte in einem Low-Risk und High-Reward Szenario für Cyber-Krimi...

Quo Vadis, Homo Viator? / Journeys in Jože Hradil’s Faceless Pictures

Directory of Open Access Journals (Sweden)

Tapodi Zsuzsa

2015-12-01

Full Text Available In Jože Hradil’s Faceless Pictures [Slike brez obrazov] the characters go astray or get into the attraction of adventures and set off for a journey. The spiritual and identity shifts can be interpreted along these eternal human desires as well. A patchwork of remembering and forgetting, the internal journeys of identity preservation, spontaneous or forced assimilation, tolerance and all kinds of politics-induced human deformations are depicted in the novel. The text traces the roles of the journey defined by Jean Chevalier and Alain Gheerbrant such as the search for justice, peace, immortality and finding the spiritual center. This study examines how the concrete physical journey changes into an internal road determining the evolution of personality.

Al filo del milenio: ¿quo vadis, educación física

OpenAIRE

Olivera Betrán, Javier

1999-01-01

Inmersos en plena discusión sobre el cambio, o no, del siglo y del milenio, abundan en estas fechas los análisis del siglo XX y, por extensión, sobre el segundo milenio de nuestra historia. Para el modelo occidental el año 2000 representa un cambio histórico (aunque amputando un año al siglo y, por ende, al milenio gracias a los avispados e impacientes manipuladores de fechas con evidentes fines consumistas y sensacionalistas), pues muy pocas generaciones de la humanidad han podido vivenciar ...

Multiple Payload Ejector for Education, Science and Technology Experiments

Science.gov (United States)

Lechworth, Gary

2005-01-01

The education research community no longer has a means of being manifested on Space Shuttle flights, and small orbital payload carriers must be flown as secondary payloads on ELV flights, as their launch schedule, secondary payload volume and mass permits. This has resulted in a backlog of small payloads, schedule and cost problems, and an inability for the small payloads community to achieve routine, low-cost access to orbit. This paper will discuss Goddard's Wallops Flight Facility funded effort to leverage its core competencies in small payloads, sounding rockets, balloons and range services to develop a low cost, multiple payload ejector (MPE) carrier for orbital experiments. The goal of the MPE is to provide a low-cost carrier intended primarily for educational flight research experiments. MPE can also be used by academia and industry for science, technology development and Exploration experiments. The MPE carrier will take advantage of the DARPAI NASA partnership to perform flight testing of DARPA s Falcon small, demonstration launch vehicle. The Falcon is similar to MPE fiom the standpoint of focusing on a low-cost, responsive system. Therefore, MPE and Falcon complement each other for the desired long-term goal of providing the small payloads community with a low-cost ride to orbit. The readiness dates of Falcon and MPE are complementary, also. MPE is being developed and readied for flight within 18 months by a small design team. Currently, MPE is preparing for Critical Design Review in fall 2005, payloads are being manifested on the first mission, and the carrier will be ready for flight on the first Falcon demonstration flight in summer, 2006. The MPE and attached experiments can weigh up to 900 lb. to be compatible with Falcon demonstration vehicle lift capabilities fiom Wallops, and will be delivered to the Falcon demonstration orbit - 100 nautical mile circular altitude.

Influence of non-radioactive payload parameters on radioactive shipping packages

International Nuclear Information System (INIS)

Drez, P.E.; Murthy, D.V.S.; Temus, C.J.; Quinn, G.J.; Ozaki, C.

1989-01-01

The transport of radioactive waste materials in radioactive material (RAM) packages involves two components: the packaging used for transportation, and the waste which forms the payload. The payload is usually comprised of non-radioactive materials contaminated with radionuclides. The non-radionuclide payload characteristics can often be a controlling factor in determining the restrictions imposed on the certification of the package. This paper describes these package/payload interactions and the limiting parameters for the Transuranic Package Transporter-II (TRUPACT-II), designed for the transportation of Contact Handled Transuranic (CH-TRU) waste. The parameters discussed include the physical and chemical form of the payload, the configuration of the waste, and resulting gas generation and gas release phenomena. Brief descriptions of the TRUPACT-II package and its payload are presented initially

Aerospace Payloads Leak Test Methodology

Science.gov (United States)

Lvovsky, Oleg; Grayson, Cynthia M.

2010-01-01

Pressurized and sealed aerospace payloads can leak on orbit. When dealing with toxic or hazardous materials, requirements for fluid and gas leakage rates have to be properly established, and most importantly, reliably verified using the best Nondestructive Test (NDT) method available. Such verification can be implemented through application of various leak test methods that will be the subject of this paper, with a purpose to show what approach to payload leakage rate requirement verification is taken by the National Aeronautics and Space Administration (NASA). The scope of this paper will be mostly a detailed description of 14 leak test methods recommended.

Ares V: New Opportunities for Scientific Payloads

Science.gov (United States)

Creech, Steve

2009-01-01

What if scientists and payload planners had access to three to five times the volume and five to nine times the mass provided by today's launch vehicles? This simple question can lead to numerous exciting possibilities, all involving NASA's new Ares V cargo launch vehicle now on the drawing board. Multiple scientific fields and payload designers have that opportunity with the Ares V cargo launch vehicle, being developed at NASA as the heavy-lift component of the U.S. Space Exploration Policy. When the Ares V begins flying late next decade, its capabilities will significantly exceed the 1960s-era Saturn V or the current Space Shuttle, while it benefits from their engineering, manufacturing, and infrastructure heritage. It will send more crew and cargo to more places on the lunar surface than Apollo and provide ongoing support to a permanent lunar outpost. Moreover, it will restore a strategic heavy-lift U.S. asset, which can support human and robotic exploration and scientific ventures for decades to come. Assessment of astronomy payload requirements since Spring 2008 has indicated that Ares V has the potential to support a range of payloads and missions. Some of these missions were impossible in the absence of Ares V's capabilities. Collaborative design/architecture inputs, exchanges, and analyses have already begun between scientists and payload developers. A 2008 study by a National Research Council (NRC) panel, as well as analyses presented by astronomers and planetary scientists at two weekend conferences in 2008, support the position that Ares V has benefit to a broad range of planetary and astronomy missions. This early dialogue with Ares V engineers is permitting the greatest opportunity for payload/transportation/mission synergy and the least financial impact to Ares V development. In addition, independent analyses suggest that Ares V has the opportunity to enable more cost-effective mission design.

The Hotel Payload, plans for the period 2003-2006

Science.gov (United States)

Hansen, Gudmund; Mikalsen, Per-Arne

2003-08-01

The cost and complexity of scientific experiments, carried by traditional sounding rocket payloads, are increasing. At the same time the scientific environment faces declining funding for this basic research. In order to meet the invitation from the science community, Andøya Rocket Range runs a programme for developing a sounding rocket payload, in order to achieve an inexpensive and cost-effective tool for atmosphere research and educational training. The Hotel Payload is a new technological payload concept in the sounding rocket family. By means of standardized mechanical structures and electronics, flexibility in data collection and transmission, roomy vehicles are affordable to most of the scientific research environments as well as for educational training. A complete vehicle - ready for installation of scientific experiments - is offered to the scientists to a fixed price. The fixed price service also includes launch services. This paper describes the Hotel Payload concept and its technology. In addition the three year plan for the development project is discussed. The opportunity of using the Hotel Payload as a platform for a collaborative triangle between research, education and industry is also discussed.

IMAX films Destiny in Atlantis's payload bay

Science.gov (United States)

2001-01-01

In the Payload Changeout Room at Launch Pad 39A, a film crew from IMAX prepares its 3-D movie camera to film the payload bay door closure on Atlantis. Behind them is the payload, the U.S. Laboratory Destiny, which will fly on mission STS-98, the seventh construction flight to the ISS. Destiny, a key element in the construction of the International Space Station, is 28 feet long and weighs 16 tons. This research and command-and-control center is the most sophisticated and versatile space laboratory ever built. It will ultimately house a total of 23 experiment racks for crew support and scientific research. Launch of Atlantis is Feb. 7 at 6:11 p.m. EST.

14 CFR 1214.306 - Payload specialist relationship with sponsoring institutions.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Payload specialist relationship with... ADMINISTRATION SPACE FLIGHT Payload Specialists for Space Transportation System (STS) Missions § 1214.306 Payload specialist relationship with sponsoring institutions. Specialists who are not U.S. Government employees must...

Teater

Index Scriptorium Estoniae

2004-01-01

U. Vadi "Kohtume trompetis", lavastaja U. Vadi. Esietendus 1. apr. Rahvusraamatukogu teatrisaalis ; Theatrumis esietendus 30. märtsil Vanalinna Hariduskolleegiumi Gümnaasiumi teatriharu diplomietendus, V. Tendrjakovi "Koolilõpuöö" L. Petersoni lavastuses ; M. Schisgali "Armastuse narrid" Vene Draamateatris, lavastaja E. Nuter. Esietendus 5. apr

Calculating Payload for a Tethered Balloon System

Science.gov (United States)

Charles D. Tangren

1980-01-01

A graph method to calculate payload for a tethered balloon system, with the supporting helium lift and payload equations. is described. The balloon system is designed to collect emissions data during the convective-lift and no-convective-lift phases of a forest fire. A description of the balloon system and a list of factors affecting balloon selection are included....

PIMS-Universal Payload Information Management

Science.gov (United States)

Elmore, Ralph; McNair, Ann R. (Technical Monitor)

2002-01-01

As the overall manager and integrator of International Space Station (ISS) science payloads and experiments, the Payload Operations Integration Center (POIC) at Marshall Space Flight Center had a critical need to provide an information management system for exchange and management of ISS payload files as well as to coordinate ISS payload related operational changes. The POIC's information management system has a fundamental requirement to provide secure operational access not only to users physically located at the POIC, but also to provide collaborative access to remote experimenters and International Partners. The Payload Information Management System (PIMS) is a ground based electronic document configuration management and workflow system that was built to service that need. Functionally, PIMS provides the following document management related capabilities: 1. File access control, storage and retrieval from a central repository vault. 2. Collect supplemental data about files in the vault. 3. File exchange with a PMS GUI client, or any FTP connection. 4. Files placement into an FTP accessible dropbox for pickup by interfacing facilities, included files transmitted for spacecraft uplink. 5. Transmission of email messages to users notifying them of new version availability. 6. Polling of intermediate facility dropboxes for files that will automatically be processed by PIMS. 7. Provide an API that allows other POIC applications to access PIMS information. Functionally, PIMS provides the following Change Request processing capabilities: 1. Ability to create, view, manipulate, and query information about Operations Change Requests (OCRs). 2. Provides an adaptable workflow approval of OCRs with routing through developers, facility leads, POIC leads, reviewers, and implementers. Email messages can be sent to users either involving them in the workflow process or simply notifying them of OCR approval progress. All PIMS document management and OCR workflow controls are

The payloads of Advanced Virgo: current status and upgrades

Science.gov (United States)

Naticchioni, L.; Virgo Collaboration

2018-02-01

The development and integration of new detector payloads has been an important part of the Advanced Virgo (AdV) project, the major upgrade of the Virgo interferometric detector of Gravitational Waves, aiming to increase the detector sensitivity by one order of magnitude. During the integration phase of the new AdV payloads with monolithic suspension of mirrors we experienced systematic suspension failures later identified as caused by dust contamination of the vacuum system. In order to not postpone the detector commissioning, making possible to join the LIGO O2 observation run, the Collaboration decided to proceed with the integration of the payloads relying on steel wire suspensions for all the mirrors. In this proceeding the status of the currently integrated payloads is reported, including their angular control characterization and the Q-factor measurements for test mass steel wire suspensions. The payload upgrade for the re-integration of monolithic suspensions after the O2 run is reported in the last section.

A new sounding rocket payload for solar plasma studies

Science.gov (United States)

Bruner, Marilyn E.; Brown, William A.; Appert, Kevin L.

1989-01-01

A sounding rocket payload developed for studies of high-temperature plasmas associated with solar active regions and flares is described. The payload instruments will record both spectra and images in the UV, EUV, and soft X-ray regions of the spectrum. The instruments, including the Dual Range Spectrograph, the Flat Field Soft X-ray Spectrograph, the Normal Incidence Soft X-ray Imager, the UV Filtergraph, and the H-alpha Imaging system, are described. Attention is also given to the new structural system of the payload, based on a large optical table suspended within the payload cavity, which will support the optical elements in their correct positions and orientations and will maintain these alignments throughout the rocket launch environment.

Payload Crew Training Complex (PCTC) utilization and training plan

Science.gov (United States)

Self, M. R.

1980-01-01

The physical facilities that comprise the payload crew training complex (PCTC) are described including the host simulator; experiment simulators; Spacelab aft flight deck, experiment pallet, and experiment rack mockups; the simulation director's console; payload operations control center; classrooms; and supporting soft- and hardware. The parameters of a training philosophy for payload crew training at the PCTC are established. Finally the development of the training plan is addressed including discussions of preassessment, and evaluation options.

ISS and Shuttle Payload Research Development and Processing

Science.gov (United States)

Calhoun, Kyle A.

2010-01-01

NASA's ISS and Spacecraft Processing Directorate (UB) is charged with the performance of payload development for research originating through NASA, ISS international partners, and the National Laboratory. The Payload Development sector of the Directorate takes biological research approved for on orbit experimentation from its infancy stage and finds a way to integrate and implement that research into a payload on either a Shuttle sortie or Space Station increment. From solicitation and selection, to definition, to verification, to integration and finally to operations and analysis, Payload Development is there every step of the way. My specific work as an intern this summer has consisted of investigating data received by separate flight and ground control Advanced Biological Research Systems (ABRS) units for Advanced Plant Experiments (APEX) and Cambium research. By correlation and analysis of this data and specific logbook information I have been working to explain changes in environmental conditions on both the flight and ground control unit. I have then, compiled all of that information into a form that can be presentable to the Principal Investigator (PI). This compilation allows that PI scientist to support their findings and add merit to their research. It also allows us, as the Payload Developers, to further inspect the ABRS unit and its performance

ESPA Based Secondary Payload Orbit Maneuvering System, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Busek Co. Inc. proposes to develop/design an integrated propulsion, power, ACS, and separation module for secondary ESPA payloads. The standardized secondary payload...

Payloads development for European land mobile satellites: A technical and economical assessment

Science.gov (United States)

Perrotta, G.; Rispoli, F.; Sassorossi, T.; Spazio, Selenia

1990-01-01

The European Space Agency (ESA) has defined two payloads for Mobile Communication; one payload is for pre-operational use, the European Land Mobile System (EMS), and one payload is for promoting the development of technologies for future mobile communication systems, the L-band Land Mobile Payload (LLM). A summary of the two payloads and a description of their capabilities is provided. Additionally, an economic assessment of the potential mobile communication market in Europe is provided.

The unrealized potential for heavy balloon payloads

Science.gov (United States)

Winker, J. A.

1993-02-01

Knowing that properties of new polyethylene films are superior to previous types, one would believe that heavier payloads can now be safely carried. Some experimentation has already been done to verify that assumption. Future expectations are discussed. We believe that with present-day materials, and with only limited changes in design philosophies, maximum payload weights can be increased by 50 to 75% from presently accepted maxima.

A new sounding rocket payload for solar plasma studies

International Nuclear Information System (INIS)

Bruner, M.E.; Brown, W.A.; Appert, K.L.

1989-01-01

A sounding rocket payload developed for studies of high-temperature plasmas associated with solar active regions and flares is described. The payload instruments will record both spectra and images in the UV, EUV, and soft X-ray regions of the spectrum. The instruments, including the Dual Range Spectrograph, the Flat Field Soft X-ray Spectrograph, the Normal Incidence Soft X-ray Imager, the UV Filtergraph, and the H-alpha Imaging system, are described. Attention is also given to the new structural system of the payload, based on a large optical table suspended within the payload cavity, which will support the optical elements in their correct positions and orientations and will maintain these alignments throughout the rocket launch environment. 8 refs

Ares V: Shifting the Payload Design Paradigm

Science.gov (United States)

Sumrall, Phil; Creech, Steve; Cockrell, Charles E.

2009-01-01

NASA is designing the Ares V heavy-lift cargo launch vehicle to send more crew and cargo to more places on the lunar surface than the 1960s-era Saturn V and to provide ongoing support for a permanent lunar outpost. This uncrewed cargo vehicle is designed to operate together with the Ares I crew vehicle (Figure 1). In addition to this role, however, its unmatched mass and volume capability represent a national asset for exploration, science, and commerce. The Ares V also enables or significantly enhances a large class of space missions not thought possible by scientists and engineers since the Saturn V program ended over 30 years ago. Compared to current systems, it will offer approximately five times the mass and volume to most orbits and locations. This should allow prospective mission planners to build robust payloads with margins that are three to five times the industry norm. The space inside the planned payload shroud has enough usable volume to launch the volumetric equivalent of approximately 10 Apollo Lunar Modules or approximately five equivalent Hubble Space Telescopes. This mass and volume capability to low-Earth orbit (LEO) enables a host of new scientific and observation platforms, such as telescopes, satellites, planetary and solar missions, as well as being able to provide the lift for future large in-space infrastructure missions, such as space based solar power and mining, Earth asteroid defense, propellant depots, etc. In addition, payload designers may also have the option of simplifying their designs or employing Ares V s payload as dumb mass to reduce technical and operational risk. The Ares V team is engaging the potential payload community now, two to three years before System Requirements Review (SRR), in order to better understand the additional requirements from the payload community that could be accommodated in the Ares V design in its conceptual phase. This paper will discuss the Ares V reference mission and capability, as well as its

Exomars 2018 Rover Pasteur Payload

Science.gov (United States)

Debus, Andre; Bacher, M.; Ball, A.; Barcos, O.; Bethge, B.; Gaubert, F.; Haldemann, A.; Lindner, R.; Pacros, A.; Trautner, R.; Vag, J.

ars programme is a joint ESA-NASA program having exobiology as one of the key science objectives. It is divided into 2 missions: the first mission is ESA-led with an ESA orbiter and an ESA Entry, Descent and Landing (EDL) demonstrator, launched in 2016 by NASA, and the second mission is NASA-led, launched in 2018 by NASA carrying an ESA rover and a NASA rover both deployed by a single NASA EDL system. For ESA, the ExoMars programme will demonstrate key flight and in situ enabling technologies in support of the European ambitions for future exploration missions, as outlined in the Aurora Declaration. While the ExoMars 2016 mission will accomplish a technological objective (Entry, Descent and Landing of a payload on the surface) and a Scientific objective (investigation of Martian atmospheric trace gases and their sources, focussing particularly on methane), the ExoMars 2018 ESA Rover will carry a comprehensive and coherent suite of analytical instruments dedicated to exobiology and geology research: the Pasteur Payload (PPL). This payload includes a selection of complementary instruments, having the following goals: to search for signs of past and present life on Mars and to investigate the water/geochemical environment as a function of depth in the shallow subsurface. The ExoMars Rover includes a drill for accessing underground materials, and a Sample Preparation and Distribution System. The Rover will travel several kilometres looking for sites warranting further investigation, where it will collect and analyse samples from within outcrops and from the subsurface for traces of complex organic molecules. In addition to further details on this Exomars 2018 rover mission, this presentation will focus on the scientific objectives and the instruments needed to achieve them, including details of how the Pasteur Payload as a whole addresses Mars research objectives.

Mars MetNet Mission Payload Overview

Science.gov (United States)

Harri, A.-M.; Haukka, H.; Alexashkin, S.; Guerrero, H.; Schmidt, W.; Genzer, M.; Vazquez, L.

2012-09-01

A new kind of planetary exploration mission for Mars is being developed in collaboration between the Finnish Meteorological Institute (FMI), Lavochkin Association (LA), Space Research Institute (IKI) and Institutio Nacional de Tecnica Aerospacial (INTA). The Mars MetNet mission [1] is based on a new semi-hard landing vehicle called MetNet Lander (MNL). The scientific payload of the Mars MetNet Precursor mission is divided into three categories: Atmospheric instruments, Optical devices and Composition and structure devices. Each of the payload instruments will provide crucial scientific data about the Martian atmospheric phenomena.

Optimizing communication satellites payload configuration with exact approaches

Science.gov (United States)

Stathakis, Apostolos; Danoy, Grégoire; Bouvry, Pascal; Talbi, El-Ghazali; Morelli, Gianluigi

2015-12-01

The satellite communications market is competitive and rapidly evolving. The payload, which is in charge of applying frequency conversion and amplification to the signals received from Earth before their retransmission, is made of various components. These include reconfigurable switches that permit the re-routing of signals based on market demand or because of some hardware failure. In order to meet modern requirements, the size and the complexity of current communication payloads are increasing significantly. Consequently, the optimal payload configuration, which was previously done manually by the engineers with the use of computerized schematics, is now becoming a difficult and time consuming task. Efficient optimization techniques are therefore required to find the optimal set(s) of switch positions to optimize some operational objective(s). In order to tackle this challenging problem for the satellite industry, this work proposes two Integer Linear Programming (ILP) models. The first one is single-objective and focuses on the minimization of the length of the longest channel path, while the second one is bi-objective and additionally aims at minimizing the number of switch changes in the payload switch matrix. Experiments are conducted on a large set of instances of realistic payload sizes using the CPLEX® solver and two well-known exact multi-objective algorithms. Numerical results demonstrate the efficiency and limitations of the ILP approach on this real-world problem.

Application of photonics in next generation telecommunication satellites payloads

Science.gov (United States)

Anzalchi, J.; Inigo, P.; Roy, B.

2017-11-01

Next generation broadband telecommunication satellites are required to provide very high data throughput using complex multibeam architectures. These high throughput `Terabit/s' Satellites will incorporate payloads with very large quantity of conventional RF equipment, co-axial cables, waveguides, harnesses and ancillary equipment, making the Assembly, Integration and Test (AIT) very complex. Use of `RF over Fiber' and associated photonics equipment can make the process of AIT much simpler with the added benefit of significant reduction in number of payload equipment and inherent payload mass.

Experience of Data Handling with IPPM Payload

Science.gov (United States)

Errico, Walter; Tosi, Pietro; Ilstad, Jorgen; Jameux, David; Viviani, Riccardo; Collantoni, Daniele

2010-08-01

A simplified On-Board Data Handling system has been developed by CAEN AURELIA SPACE and ABSTRAQT as PUS-over-SpaceWire demonstration platform for the Onboard Payload Data Processing laboratory at ESTEC. The system is composed of three Leon2-based IPPM (Integrated Payload Processing Module) computers that play the roles of Instrument, Payload Data Handling Unit and Satellite Management Unit. Two PCs complete the test set-up simulating an external Memory Management Unit and the Ground Control Unit. Communication among units take place primarily through SpaceWire links; RMAP[2] protocol is used for configuration and housekeeping. A limited implementation of ECSS-E-70-41B Packet Utilisation Standard (PUS)[1] over CANbus and MIL-STD-1553B has been also realized. The Open Source RTEMS is running on the IPPM AT697E CPU as real-time operating system.

Innovative approach for low-cost quick-access small payload missions

Science.gov (United States)

Friis, Jan W., Jr.

2000-11-01

A significant part of the burgeoning commercial space industry is placing an unprecedented number of satellites into low earth orbit for a variety of new applications and services. By some estimates the commercial space industry now exceeds that of government space activities. Yet the two markets remain largely separate, with each deploying dedicated satellites and infrastructure for their respective missions. One commercial space firm, Final Analysis, has created a new program wherein either government, scientific or new technology payloads can be integrated on a commercial spacecraft on commercial satellites for a variety of mission scenarios at a fraction of the cost of a dedicated mission. NASA has recognized the advantage of this approach, and has awarded the Quick Ride program to provide frequent, low cost flight opportunities for small independent payloads aboard the Final Analysis constellation, and investigators are rapidly developing science programs that conform to the proposed payload accommodations envelope. Missions that were not feasible using dedicated launches are now receiving approval under the lower cost Quick Ride approach. Final Analysis has dedicated ten out of its thirty-eight satellites in support of the Quick Ride efforts. The benefit of this type of space access extend beyond NASA science programs. Commercial space firms can now gain valuable flight heritage for new technology and satellite product offerings. Further, emerging international space programs can now place a payload in orbit enabling the country to allocate its resources against the payload and mission requirements rather htan increased launch costs of a dedicated spacecraft. Finally, the low cost nature provides University-based research educational opportunities previously out of the reach of most space-related budgets. This paper will describe the motivation, benefits, technical features, and program costs of the Final Analysis secondary payload program. Payloads can be

Neural controller for adaptive movements with unforeseen payloads.

Science.gov (United States)

Kuperstein, M; Wang, J

1990-01-01

A theory and computer simulation of a neural controller that learns to move and position a link carrying an unforeseen payload accurately are presented. The neural controller learns adaptive dynamic control from its own experience. It does not use information about link mass, link length, or direction of gravity, and it uses only indirect uncalibrated information about payload and actuator limits. Its average positioning accuracy across a large range of payloads after learning is 3% of the positioning range. This neural controller can be used as a basis for coordinating any number of sensory inputs with limbs of any number of joints. The feedforward nature of control allows parallel implementation in real time across multiple joints.

Optical Payload for Lasercomm Science

Data.gov (United States)

National Aeronautics and Space Administration — The Optical Payload for Lasercomm Science (OPALS) project, which is part of the JPL Phaeton early career employee hands-on training program, aims to demonstrate...

Quo Vadis? The Capability Space and New Directions for the Philosophy of Educational Research

Science.gov (United States)

Hart, Caroline Sarojini

2009-01-01

Amartya Sen's capability approach creates an evaluative space within which individual well-being is considered in ways that diverge from dominant utilitarian views. Instead of measuring well-being based on the accumulation of wealth and resources by individuals and nations, the capability approach focuses on the opportunities (capabilities) an…

Quo Vadis Clozapine? A Bibliometric Study of 45 Years of Research in International Context

Directory of Open Access Journals (Sweden)

Francisco López-Muñoz

2015-09-01

Full Text Available We have carried out a bibliometric study about the international scientific publications on clozapine. We have used the EMBASE and MEDLINE databases, and we applied bibliometric indicators of production, as Price’s Law on the increase of scientific literature. We also calculated the participation index (PI of the different countries. The bibliometric data have also been correlated with some social and health data from the 12 most productive countries in biomedicine and health sciences. In addition, 5607 original documents dealing with clozapine, published between 1970 and 2013, were downloaded. Our results state non-fulfilment of Price’s Law, with scientific production on clozapine showing linear growth (r = 0.8691, vs. r = 0.8478 after exponential adjustment. Seven of the 12 journals with the highest numbers of publications on clozapine have an Impact Factor > 2. Among the countries generating clozapine research, the most prominent is the USA (PI = 24.32, followed by the UK (PI = 6.27 and Germany (PI = 5.40. The differences among countries on clozapine research are significantly related to economic variables linked to research. The scientific interest in clozapine remains remarkable, although after the application of bibliometric indicators of production, a saturation point is evident in the growth of scientific literature on this topic.

Conference Report: Quo Vadis Reconstructive Social Work Research? Traditions—State of the Art—Perspectives

Directory of Open Access Journals (Sweden)

Ulrike Loch

2008-01-01

Full Text Available This conference report gives an overview of the 3rd annual conference of the "Network for Reconstructive Research and Biography" held at the Alice-Salomon-University of Applied Science, Berlin, Germany, on 23rd and 24th March, 2007. The aim of this year's conference was to report on the state of the art of research on social work, the current research situations at various universities in Germany, and the discourse on reconstructive social work within the discipline. This was to serve as a basis for the planned next step regarding the further development of the Network, i.e. intensive exchange, promotion of networking with colleagues and concrete forms of co-operation and strategies designed to further consolidate reconstructive social work in the Federal Republic of Germany. The keynote speakers gave further particulars about the state of the art of social work research, the workshops explored this situation in the areas of international social work practice and research, the teaching of research, junior researchers, research funding and new bachelor and master degree programs in the reconstructive social work. Approximately 40 participants met and provided new trend-setting ideas for qualitative research in social work and for the work and structure of the Network. URN: urn:nbn:de:0114-fqs0801338

The Case for GEO Hosted SSA Payloads

Science.gov (United States)

Welsch, C.; Armand, B.; Repp, M.; Robinson, A.

2014-09-01

Space situational awareness (SSA) in the geosynchronous earth orbit (GEO) belt presents unique challenges, and given the national importance and high value of GEO satellites, is increasingly critical as space becomes more congested and contested. Space situational awareness capabilities can serve as an effective deterrent against potential adversaries if they provide accurate, timely, and persistent information and are resilient to the threat environment. This paper will demonstrate how simple optical SSA payloads hosted on GEO commercial and government satellites can complement the SSA mission and data provided by Space-Based Space Surveillance (SBSS) and the Geosynchronous Space Situational Awareness Program (GSSAP). GSSAP is built by Orbital Sciences Corporation and launched on July 28, 2014. Analysis performed for this paper will show how GEO hosted SSA payloads, working in combination with SBSS and GSSAP, can increase persistence and timely coverage of high value assets in the GEO belt. The potential to further increase GEO object identification and tracking accuracy by integrating SSA data from multiple sources across different viewing angles including GEO hosted SSA sources will be addressed. Hosting SSA payloads on GEO platforms also increases SSA mission architecture resiliency as the sensors are by distributed across multiple platforms including commercial platforms. This distributed architecture presents a challenging target for an adversary to attempt to degrade or disable. We will present a viable concept of operations to show how data from hosted SSA sensors could be integrated with SBSS and GSSAP data to present a comprehensive and more accurate data set to users. Lastly, we will present an acquisition approach using commercial practices and building on lessons learned from the Commercially Hosted Infra Red Payload CHIRP to demonstrate the affordability of GEO hosted SSA payloads.

Response Analysis Of Payload Fairing Due To Acoustic Excitation

Directory of Open Access Journals (Sweden)

Annu Cherian

2015-08-01

Full Text Available Abstract During flight missions launch vehicles are subjected to a severe dynamic pressure loading aero-acoustic and structure-borne excitations of various circumstances which can endanger the survivability of the payload and the vehicles electronic equipment and consequently the success of the mission. The purpose of the fairing is to protect the satellite from damage during launch until deployment in space. Both the structural and acoustic loads are significant during the first few minutes of a launch and have the potential to damage the payload. This paper describes the analysis of mechanical structure and the inner acoustic cavity of the payload fairing subjected to acoustic field. The vibro-acoustic behaviour of the fairing is analyzed using Statistical Energy Analysis SEA Model. The software VA One is used for the statistical energy analysis of launch vehicle payload fairing due to acoustic excitation.

A distributed planning concept for Space Station payload operations

Science.gov (United States)

Hagopian, Jeff; Maxwell, Theresa; Reed, Tracey

1994-01-01

The complex and diverse nature of the payload operations to be performed on the Space Station requires a robust and flexible planning approach. The planning approach for Space Station payload operations must support the phased development of the Space Station, as well as the geographically distributed users of the Space Station. To date, the planning approach for manned operations in space has been one of centralized planning to the n-th degree of detail. This approach, while valid for short duration flights, incurs high operations costs and is not conducive to long duration Space Station operations. The Space Station payload operations planning concept must reduce operations costs, accommodate phased station development, support distributed users, and provide flexibility. One way to meet these objectives is to distribute the planning functions across a hierarchy of payload planning organizations based on their particular needs and expertise. This paper presents a planning concept which satisfies all phases of the development of the Space Station (manned Shuttle flights, unmanned Station operations, and permanent manned operations), and the migration from centralized to distributed planning functions. Identified in this paper are the payload planning functions which can be distributed and the process by which these functions are performed.

The Motion Planning of Overhead Crane Based on Suppressing Payload Residual Swing

Directory of Open Access Journals (Sweden)

Liu Hua-sen

2016-01-01

Full Text Available Since the overhead crane system is subject to under actuation system due to that overhead crane and payload are connected by flexibility wire rope. The payload generates residual swing when the overhead crane is accelerating/ decelerating the motions. This may cause trouble for the payload precise positioning and motion planning. Hence, an optimization input shaping control method is presented to reduce the under actuated overhead crane’s payload swing caused via the inertia force. The dynamic model of the overhead crane is proposed according to the physics structure of the crane. The input shaper based on the motion planning of the crane is used as the feed forward input to suppress payload residual swing. Simulation and experiment results indicate that the ZV input shaper and ZVD input shaper can reduce the payload swing of the overhead crane.

Power requirements assessment for lunar and Mars scientific and experimental payloads

International Nuclear Information System (INIS)

Kotas, J.F.

1992-01-01

This paper reports on an evaluation of prospective scientific payloads and surface experiments for future manned missions to the moon and Mars which determined that overall mission objectives and requirements influence the selection of candidate power systems. A generic classification of these science missions was developed to examine these relationships. Scientific missions were defined for the four Synthesis Report architectures and cumulative power load and payload mix computed. Approximately half of all deployed science payloads were sited within the main surface outpost and powered by the central power generation facility. The remaining remote science payloads require either autonomous or smaller central power facilities

STS-74 view of ODS from Payload Changout Room

Science.gov (United States)

1995-01-01

Workers at Launch Pad 39A are preparing to close the payload bay doors on the Space Shuttle Atlantis for its upcoming launch on Mission STS-74 and the second docking with the Russian Space Station Mir. Uppermost in the payload bay is the Orbiter Docking System (ODS), which also flew on the first docking flight between the Space Shuttle and MIR. Lowermost is the primary payload of STS-74, the Russian-built Docking Module. During the mission, the Docking Module will first be attached to ODS and then to Mir. It will be left attached to Mir to become a permanent extension that will afford adequate clearance between the orbiter and the station during future dockings. At left in the payload bay, looking like a very long pole, is the Canadian-built Remote Manipulator System arm that will be used by the crew to hoist the Docking Module and attach it to the ODS.

The development of STS payload environmental engineering standards

Science.gov (United States)

Bangs, W. F.

1982-01-01

The presently reported effort to provide a single set of standards for the design, analysis and testing of Space Transportation System (STS) payloads throughout the NASA organization must be viewed as essentially experimental, since the concept of incorporating the diverse opinions and experiences of several separate field research centers may in retrospect be judged too ambitious or perhaps even naive. While each STS payload may have unique characteristics, and the project should formulate its own criteria for environmental design, testing and evaluation, a reference source document providing coordinated standards is expected to minimize the duplication of effort and limit random divergence of practices among the various NASA payload programs. These standards would provide useful information to all potential STS users, and offer a degree of standardization to STS users outside the NASA organization.

LLNL Compliance Plan for TRUPACT-2 Authorized Methods for Payload Control

International Nuclear Information System (INIS)

1995-03-01

This document describes payload control at LLNL to ensure that all shipments of CH-TRU waste in the TRUPACT-II (Transuranic Package Transporter-II) meet the requirements of the TRUPACT-II SARP (safety report for packaging). This document also provides specific instructions for the selection of authorized payloads once individual payload containers are qualified for transport. The physical assembly of the qualified payload and operating procedures for the use of the TRUPACT-II, including loading and unloading operations, are described in HWM Procedure No. 204, based on the information in the TRUPACT-II SARP. The LLNL TRAMPAC, along with the TRUPACT-II operating procedures contained in HWM Procedure No. 204, meet the documentation needs for the use of the TRUPACT-II at LLNL. Table 14-1 provides a summary of the LLNL waste generation and certification procedures as they relate to TRUPACT-II payload compliance

Planning and Scheduling of Payloads of ASTROSAT during Initial ...

Indian Academy of Sciences (India)

41

2015-09-28

Sep 28, 2015 ... tools, encompassing spacecraft sub-systems, on-orbit, domain and environmental ... in 10-100 keV, (3) A Soft X-ray Imaging Telescope (SXT) using X-ray ... Recorder (SSR) and there is no real time data capability available for payload ..... operating the five payloads in Astrosat efficiently is the Command.

Payload specialist Reinhard Furrer show evidence of previous blood sampling

Science.gov (United States)

1985-01-01

Payload specialist Reinhard Furrer shows evidence of previous blood sampling while Wubbo J. Ockels, Dutch payload specialist (only partially visible), extends his right arm after a sample has been taken. Both men show bruises on their arms.

STS-9 payload specialists and backup in training session

Science.gov (United States)

1983-01-01

Two Spacelab 1 payload specialists and a backup for that flight prepare for a training session in the JSC mockup and integration laboratory. Fully decked out in the Shuttle constant wear garments (foreground) are Ulf Merbold, left, and Byron K. Licktenberg, prime crewmembers on the STS-9 team. In civilian clothes is payload specialist backup Michael L. Lampton.

International Space Station-Based Electromagnetic Launcher for Space Science Payloads

Science.gov (United States)

Jones, Ross M.

2013-01-01

A method was developed of lowering the cost of planetary exploration missions by using an electromagnetic propulsion/launcher, rather than a chemical-fueled rocket for propulsion. An electromagnetic launcher (EML) based at the International Space Station (ISS) would be used to launch small science payloads to the Moon and near Earth asteroids (NEAs) for the science and exploration missions. An ISS-based electromagnetic launcher could also inject science payloads into orbits around the Earth and perhaps to Mars. The EML would replace rocket technology for certain missions. The EML is a high-energy system that uses electricity rather than propellant to accelerate payloads to high velocities. The most common type of EML is the rail gun. Other types are possible, e.g., a coil gun, also known as a Gauss gun or mass driver. The EML could also "drop" science payloads into the Earth's upper

STS-98 Destiny in Atlantis's payload bay

Science.gov (United States)

2001-01-01

KENNEDY SPACE CENTER, Fla. -- The U.S. Laboratory Destiny rests once again in Atlantis'''s payload bay, at Launch Pad 39A. Closing of the payload bay doors is imminent. Destiny, a key element in the construction of the International Space Station, is 28 feet long and weighs 16 tons. This research and command-and-control center is the most sophisticated and versatile space laboratory ever built. It will ultimately house a total of 23 experiment racks for crew support and scientific research. Destiny will be launched Feb. 7 on STS-98, the seventh construction flight to the ISS.

The use of artificial intelligence techniques to improve the multiple payload integration process

Science.gov (United States)

Cutts, Dannie E.; Widgren, Brian K.

1992-01-01

A maximum return of science and products with a minimum expenditure of time and resources is a major goal of mission payload integration. A critical component then, in successful mission payload integration is the acquisition and analysis of experiment requirements from the principal investigator and payload element developer teams. One effort to use artificial intelligence techniques to improve the acquisition and analysis of experiment requirements within the payload integration process is described.

Hermod: optical payload technology demonstrator flying on PROBA-V: overview of the payload development, testing and results after 1 year in orbit exploitation

Science.gov (United States)

Hernandez, S.; Blasco, J.; Henriksen, V.; Samuelsson, H.; Navasquillo, O.; Grimsgaard, M.; Mellab, K.

2017-11-01

Proba-V is the third mission of ESA's Programme for In-orbit Technology Demonstration (IOD), based on a small, high performance satellite platform and a compact payload. Besides, the main satellite instrument aiming at Vegetation imaging, Proba-V embarks five technological payloads providing early flight opportunities for novel instruments and space technologies. Successfully launched by the ESA VEGA launcher in May 2013, it has now completed its commissioning and the full calibration of platform, main instrument and additional payloads and is, since last October, fully operational. The High dEnsity space foRM cOnnector Demonstration or HERMOD is the last payload selected to fly on Proba-V. The payload objective is to validate through an actual launch and in orbit high-density optical fibre cable assembly, cumulate space heritage for fibre optics transmission and evaluate possible degradation induced by the space environment compared to on-ground tests. The future applications of this technology are for intrasatellite optical communications in view of mass reduction, the electrical grounding simplification and to increase the transmission rate. The project has been supported under an ESA GSTP contract. T&G Elektro (Norway) developed and tested the different optical cable assembly to be validated in the payload. The electrooptic modules, control, power and mechanical interfaces have been developed by DAS Photonics (Spain). The payload contains four optical channels to be studied through the experiment, two assemblies with MTP/PC connectors and two assemblies with MPO/APC connectors. Optical data is transmitted in the four independent channels using two optoelectronic conversion modules (SIOS) working at 100Mbps including 2 full duplex channels each. A FPGA is used to generate, receive and compare the different binary patterns. The number of errors (if any) and Bit Error Rate (BER) is sent to the satellite TM interface. HERMOD successfully went through all mechanical

Inequality, discrimination, and the power of the status quo: Direct evidence for a motivation to see the way things are as the way they should be.

Science.gov (United States)

Kay, Aaron C; Gaucher, Danielle; Peach, Jennifer M; Laurin, Kristin; Friesen, Justin; Zanna, Mark P; Spencer, Steven J

2009-09-01

How powerful is the status quo in determining people's social ideals? The authors propose (a) that people engage in injunctification, that is, a motivated tendency to construe the current status quo as the most desirable and reasonable state of affairs (i.e., as the most representative of how things should be); (b) that this tendency is driven, at least in part, by people's desire to justify their sociopolitical systems; and (c) that injunctification has profound implications for the maintenance of inequality and societal change. Four studies, across a variety of domains, provided supportive evidence. When the motivation to justify the sociopolitical system was experimentally heightened, participants injunctified extant (a) political power (Study 1), (b) public funding policies (Study 2), and (c) unequal gender demographics in the political and business spheres (Studies 3 and 4, respectively). It was also demonstrated that this motivated phenomenon increased derogation of those who act counter to the status quo (Study 4). Theoretical implications for system justification theory, stereotype formation, affirmative action, and the maintenance of inequality are discussed. (c) 2009 APA, all rights reserved).

Payload Safety: Risk and Characteristic-Based Control of Engineered Nanomaterials

Science.gov (United States)

Abou, Seraphin Chally; Saad, Maarouf

2013-09-01

In the last decade progress has been made to assist organizations that are developing payloads intended for flight on the International Space Station (ISS) and/or Space Shuttle. Collaboration programs for comprehensive risk assessment have been initiated between the U.S. and the European Union to generate requirements and data needed to comply with payloads safety and to perform risk assessment and controls guidance. Yet, substantial research gaps remain, as do challenges in the translation of these research findings to control for exposure to nanoscale material payloads, and the health effects. Since nanomaterial structures are different from traditional molecules, some standard material properties can change at size of 50nm or less. Changes in material properties at this scale challenge our understanding of hazards posed by nanomaterial payloads in the ISS realistic exposure conditions, and our ability to anticipate, evaluate, and control potential health issues, and safety. The research question addressed in this framework is: what kind of descriptors can be developed for nanomaterial payloads risks assessment? Methods proposed incorporate elements of characteristic- based risk an alysis: (1) to enable characterization of anthropogenic nanomaterials which can result in incidental from natural nanoparticles; and (2) to better understand safety attributes in terms of human health impacts from exposure to varying types of engineered nanomaterials.

International Cooperation of Payload Operations on the International Space Station

Science.gov (United States)

Melton, Tina; Onken, Jay

2003-01-01

One of the primary goals of the International Space Station (ISS) is to provide an orbiting laboratory to be used to conduct scientific research and commercial products utilizing the unique environment of space. The ISS Program has united multiple nations into a coalition with the objective of developing and outfitting this orbiting laboratory and sharing in the utilization of the resources available. The primary objectives of the real- time integration of ISS payload operations are to ensure safe operations of payloads, to avoid mutual interference between payloads and onboard systems, to monitor the use of integrated station resources and to increase the total effectiveness of ISS. The ISS organizational architecture has provided for the distribution of operations planning and execution functions to the organizations with expertise to perform each function. Each IPP is responsible for the integration and operations of their payloads within their resource allocations and the safety requirements defined by the joint program. Another area of international cooperation is the sharing in the development and on- orbit utilization of unique payload facilities. An example of this cooperation is the Microgravity Science Glovebox. The hardware was developed by ESA and provided to NASA as part of a barter arrangement.

Cover estimation and payload location using Markov random fields

Science.gov (United States)

Quach, Tu-Thach

2014-02-01

Payload location is an approach to find the message bits hidden in steganographic images, but not necessarily their logical order. Its success relies primarily on the accuracy of the underlying cover estimators and can be improved if more estimators are used. This paper presents an approach based on Markov random field to estimate the cover image given a stego image. It uses pairwise constraints to capture the natural two-dimensional statistics of cover images and forms a basis for more sophisticated models. Experimental results show that it is competitive against current state-of-the-art estimators and can locate payload embedded by simple LSB steganography and group-parity steganography. Furthermore, when combined with existing estimators, payload location accuracy improves significantly.

Japan’s Self Defense Forces After the Great East Japan Earthquake: Toward a New Status Quo

Science.gov (United States)

2012-03-01

Retrenchment, SDF Status Quo, Humanitarian Aid Disaster Relief, U.S.– Japan Security Alliance, Japanese Economy , Japanese Norms, Pacifism, Anti...Chemical, Biological, Radiological, and Nuclear CRF Central Readiness Force DDF Dynamic Defense Force DPJ Democratic Party of Japan EAC East...LNG Liquefied Natural Gas METI Ministry of Economy , Trade, and Industry MINUSTAH United Nations Stabilization Mission in Haiti MOD Ministry

Life sciences payload definition and integration study. Volume 3: Appendices

Science.gov (United States)

1972-01-01

Detail design information concerning payloads for biomedical research projects conducted during space missions is presented. Subjects discussed are: (1) equipment modules and equipment item lists, (2) weight and volume breakdown by payload and equipment units, (3) longitudinal floor arrangement configuration, and (4) nonbaseline second generation layouts.

Education Payload Operation - Demonstrations

Science.gov (United States)

Keil, Matthew

2009-01-01

Education Payload Operation - Demonstrations (EPO-Demos) are recorded video education demonstrations performed on the International Space Station (ISS) by crewmembers using hardware already onboard the ISS. EPO-Demos are videotaped, edited, and used to enhance existing NASA education resources and programs for educators and students in grades K-12. EPO-Demos are designed to support the NASA mission to inspire the next generation of explorers.

ISS Payload Operations: The Need for and Benefit of Responsive Planning

Science.gov (United States)

Nahay, Ed; Boster, Mandee

2000-01-01

International Space Station (ISS) payload operations are controlled through implementation of a payload operations plan. This plan, which represents the defined approach to payload operations in general, can vary in terms of level of definition. The detailed plan provides the specific sequence and timing of each component of a payload's operations. Such an approach to planning was implemented in the Spacelab program. The responsive plan provides a flexible approach to payload operations through generalization. A responsive approach to planning was implemented in the NASA/Mir Phase 1 program, and was identified as a need during the Skylab program. The current approach to ISS payload operations planning and control tends toward detailed planning, rather than responsive planning. The use of detailed plans provides for the efficient use of limited resources onboard the ISS. It restricts flexibility in payload operations, which is inconsistent with the dynamic nature of the ISS science program, and it restricts crew desires for flexibility and autonomy. Also, detailed planning is manpower intensive. The development and implementation of a responsive plan provides for a more dynamic, more accommodating, and less manpower intensive approach to planning. The science program becomes more dynamic and responsive as the plan provides flexibility to accommodate real-time science accomplishments. Communications limitations and the crew desire for flexibility and autonomy in plan implementation are readily accommodated with responsive planning. Manpower efficiencies are accomplished through a reduction in requirements collection and coordination, plan development, and maintenance. Through examples and assessments, this paper identifies the need to transition from detailed to responsive plans for ISS payload operations. Examples depict specific characteristics of the plans. Assessments identify the following: the means by which responsive plans accommodate the dynamic nature of

The concept verification testing of materials science payloads

Science.gov (United States)

Griner, C. S.; Johnston, M. H.; Whitaker, A.

1976-01-01

The concept Verification Testing (CVT) project at the Marshall Space Flight Center, Alabama, is a developmental activity that supports Shuttle Payload Projects such as Spacelab. It provides an operational 1-g environment for testing NASA and other agency experiment and support systems concepts that may be used in shuttle. A dedicated Materials Science Payload was tested in the General Purpose Laboratory to assess the requirements of a space processing payload on a Spacelab type facility. Physical and functional integration of the experiments into the facility was studied, and the impact of the experiments on the facility (and vice versa) was evaluated. A follow-up test designated CVT Test IVA was also held. The purpose of this test was to repeat Test IV experiments with a crew composed of selected and trained scientists. These personnel were not required to have prior knowledge of the materials science disciplines, but were required to have a basic knowledge of science and the scientific method.

Um modelo de programação orientado ao desenvolvimento de sistemas ubíquos

Directory of Open Access Journals (Sweden)

Alex Sandro Garzão

2014-04-01

Full Text Available A tarefa de desenvolver aplicações ubíquas nos modelos tradicionais de programação torna-se um desafio pois a maioria desses modelos baseia-se em premissas estáticas de arquitetura, dados, aplicação e sistemas operacionais. Por isso o presente trabalho propõe o \\textit{Ubiquitous Oriented Programming} (abreviadamente UOP, um modelo de programação orientado ao desenvolvimento de sistemas ubíquos. O UOP utiliza os conceitos de serviços e da programação orientada a objetos, integrando-os com requisitos necessários em aplicações ubíquas como compartilhamento de informações contextuais, sensibilidade ao contexto, adaptação ao contexto, mobilidade de código e concorrência. O ambiente do UOP é composto por uma linguagem de programação (UbiL, um compilador (UbiC e por uma máquina virtual (UbiVM que suporta a execução das aplicações desenvolvidas em UbiL. O modelo foi avaliado de forma experimental, onde uma aplicação foi criada e então simulada através de um cenário de comércio ubíquo. Através desse experimento concluiu-se que o UOP facilitou o desenvolvimento dessa aplicação.

Integrated Payload Data Handling Systems Using Software Partitioning

Science.gov (United States)

Taylor, Alun; Hann, Mark; Wishart, Alex

2015-09-01

An integrated Payload Data Handling System (I-PDHS) is one in which multiple instruments share a central payload processor for their on-board data processing tasks. This offers a number of advantages over the conventional decentralised architecture. Savings in payload mass and power can be realised because the total processing resource is matched to the requirements, as opposed to the decentralised architecture here the processing resource is in effect the sum of all the applications. Overall development cost can be reduced using a common processor. At individual instrument level the potential benefits include a standardised application development environment, and the opportunity to run the instrument data handling application on a fully redundant and more powerful processing platform [1]. This paper describes a joint program by SCISYS UK Limited, Airbus Defence and Space, Imperial College London and RAL Space to implement a realistic demonstration of an I-PDHS using engineering models of flight instruments (a magnetometer and camera) and a laboratory demonstrator of a central payload processor which is functionally representative of a flight design. The objective is to raise the Technology Readiness Level of the centralised data processing technique by address the key areas of task partitioning to prevent fault propagation and the use of a common development process for the instrument applications. The project is supported by a UK Space Agency grant awarded under the National Space Technology Program SpaceCITI scheme. [1].

External Contamination Control of Attached Payloads on the International Space Station

Science.gov (United States)

Soares, Carlos E.; Mikatarian, Ronald R.; Olsen, Randy L.; Huang, Alvin Y.; Steagall, Courtney A.; Schmidl, William D.; Wright, Bruce D.; Koontz, Steven

2012-01-01

The International Space Station (ISS) is an on-orbit platform for science utilization in low Earth orbit with multiple sites for external payloads with exposure to the natural and induced environments. Contamination is one of the induced environments that can impact performance, mission success and science utilization on the vehicle. This paper describes the external contamination control requirements and integration process for externally mounted payloads on the ISS. The external contamination control requirements are summarized and a description of the integration and verification process is detailed to guide payload developers in the certification process of attached payloads on the vehicle. A description of the required data certification deliverables covers the characterization of contamination sources. Such characterization includes identification, usage and operational data for each class of contamination source. Classes of external contamination sources covered are vacuum exposed materials, sources of leakage, vacuum venting and thrusters. ISS system level analyses are conducted by the ISS Space Environments Team to certify compliance with external contamination control requirements. This paper also addresses the ISS induced contamination environment at attached payload sites, both at the requirements level as well as measurements made on ISS.

Vibration Disturbance Damping System Design to Protect Payload of the Rocket

Directory of Open Access Journals (Sweden)

Sutisno Sutisno

2012-12-01

Full Text Available Rocket motor generates vibrations acting on whole rocket body including its contents. Part of the body which is sensitive to disturbance is the rocket payload. The payload consists of various electronic instruments including: transmitter, various sensors, accelerometer, gyro, the embedded controller system, and others. This paper presents research on rocket vibration influence to the payload and the method to avoid disturbance. Avoiding influence of vibration disturbance can be done using silicone gel material whose typical damping factors are relatively high. The rocket vibration was simulated using electromagnetic motor, and the vibrations were measured using an accelerometer sensor. The measurement results were displayed in the form of curve, indicating the vibration level on some parts of the tested material. Some measurement results can be applied to determine the good material to attenuate vibration disturbance on the instruments of the payload.

Investment alternative: the status quo or PACS?

Science.gov (United States)

Vanden Brink, John A.; Cywinski, Jozef K.

1990-08-01

While the cost of Picture Archiving and Communication Systems (PACS) can be substantial, the cost of continuing with present manual methods may become prohibitive in growing departments as the need for additional space and personnel (both technical and professional) to meet the increasing requirements for all image management activities continues to grow. This will occur simultaneously with increasing pressures on problems of the present system, i.e., lost films, lost revenues, delayed reporting and longer diagnostic cycle times. Present methods of image archiving communication and management i.e. the relationship of procedure volume to VFE requirements for professional and technical personnel, costs of film, film storage space, and other performance factors are analyzed based on the database created by the Technology Marketing Group (TMG) computerized cost analysis model applied to over 50 US hospitals. Also, the model is used to provide the projected cost of present methods of film management for an average US 400 +bed hospital based on ten year growth rate assumptions. TMG PACS Tracking data provides confirmation of staffmg pattern correlation to procedure volume. The data presented in the paper provides a basis for comparing the investment in maintaining the status quo to an investment in PACS.

Quo vadis: Hydrologic inverse analyses using high-performance computing and a D-Wave quantum annealer

Science.gov (United States)

O'Malley, D.; Vesselinov, V. V.

2017-12-01

Classical microprocessors have had a dramatic impact on hydrology for decades, due largely to the exponential growth in computing power predicted by Moore's law. However, this growth is not expected to continue indefinitely and has already begun to slow. Quantum computing is an emerging alternative to classical microprocessors. Here, we demonstrated cutting edge inverse model analyses utilizing some of the best available resources in both worlds: high-performance classical computing and a D-Wave quantum annealer. The classical high-performance computing resources are utilized to build an advanced numerical model that assimilates data from O(10^5) observations, including water levels, drawdowns, and contaminant concentrations. The developed model accurately reproduces the hydrologic conditions at a Los Alamos National Laboratory contamination site, and can be leveraged to inform decision-making about site remediation. We demonstrate the use of a D-Wave 2X quantum annealer to solve hydrologic inverse problems. This work can be seen as an early step in quantum-computational hydrology. We compare and contrast our results with an early inverse approach in classical-computational hydrology that is comparable to the approach we use with quantum annealing. Our results show that quantum annealing can be useful for identifying regions of high and low permeability within an aquifer. While the problems we consider are small-scale compared to the problems that can be solved with modern classical computers, they are large compared to the problems that could be solved with early classical CPUs. Further, the binary nature of the high/low permeability problem makes it well-suited to quantum annealing, but challenging for classical computers.

Quo Vadis Benchmark Simulation Models? 8th IWA Symposium on Systems Analysis and Integrated Assessment

DEFF Research Database (Denmark)

Jeppsson, U.; Alex, J.; Batstone, D,

2011-01-01

As the work of the IWA Task Group on Benchmarking of Control Strategies for WWTPs is coming towards an end, it is essential to disseminate the knowledge gained. For this reason, all authors of the IWA Scientific and Technical Report on benchmarking have come together to provide their insights, hi...

WAAVP/Pfizer award for excellence in teaching veterinary parasitology: teaching of veterinary parasitology--quo vadis?

Science.gov (United States)

Eckert, J

2000-02-29

Some thoughts on training and recruitment of academic teachers and future trends in teaching veterinary parasitology are presented with emphasis on the European situation. It is underlined that research is an indispensable basis for academic teaching. Besides a broad scientific background of the teacher, motivation and teaching methods are also important. Many academic teachers do not receive formal training in teaching methods. In order to improve future education, training of staff members in teaching methods should be promoted. Quality control of teaching and research, already established in many schools, should generally be introduced. Teaching is mostly underestimated in relation to research. Therefore, more weight should be placed on the former both in selecting scientists for the career as academic teachers and in evaluating and ranking departments for their academic activities. In the future veterinary medicine will have to cope with profound changes in the society and the veterinary profession, and the progressing European unification will enhance trends for internationalizing teaching curricula. Therefore, veterinary medicine has to reconsider the teaching subjects and methods and to lay more emphasis on flexibility, skills of problem-solving and self-learning and on training for life-long learning. At present there is an ongoing discussion on the question how to teach veterinary medicine, including veterinary parasitology. There are various options, and some of them are discussed, namely, the disciplinary and the problem-based/organ-focussed approaches. It is concluded that for teaching of veterinary parasitology and related disciplines a combined disciplinary and problem-based approach offers the best chances for fulfilling the requirements of teaching for the future. In the curriculum of undergraduate teaching of veterinary medicine at least 70-90 h should be dedicated to veterinary parasitology using a disciplinary and taxonomic approach. Additional hours are required for instructions on clinical cases in approaches focussed on animal species and/or organ diseases. As there is a need for discussing teaching issues, post-graduate specialization, and continuing education in parasitology and related disciplines on national and international levels, it is recommended to WAAVP to include regular workshops on teaching in the programmes of the biannual conferences, and to establish a permanent committee which should collect information and submit proposals for improvement of teaching veterinary parasitology.

[Swiss surgery: quo vadis? Reader and market analysis for strategic positioning of a specialty journal].

Science.gov (United States)

Freiermuth, O; Todorov, A; Bolli, M; Heberer, M

2003-01-01

Scientific journals currently face challenges including cost pressures caused by economic constraints, increasing rivalry among competitors, limited market potential of non-english speaking journals, increasing medical specialization with resulting market fragmentation, and internet-based competition. We therefore analyzed strategic opportunities of the journal Swiss Surgery on the basis of customer surveys and of a market analysis. Swiss surgeons expressed their interest in the continuation of the journal but also indicated their support for changes in its concept and for an increased use of electronic media. An international market analysis points-out the difficulties of national, non-english speaking journals in gaining impact points and in attracting authors and readers of scientific medical articles. Therefore, a journal such as Swiss Surgery should identify and use publication niches. The demand for a concept addressing surgical training including continuous postgraduate education was confirmed by the customers of Swiss Surgery. A corresponding offer does not presently exist in the area and could become the new focus of the journal. This change of concept may have a number of consequences: A journal focusing on surgical training and education should use the results of readers' surveys rather than impact point assignment to evaluate quality. The journal should increasingly use electronic services including data bases, pictures, videos and closed user groups to supplement the print version. At short term, however, the printed version should be continued and not be substituted by the electronic version in order to maintain the established brand "Swiss Surgery".

Pu and MA Management in Thermal HTR, QUO VADIS? Insights from the Euratom PUMA project

International Nuclear Information System (INIS)

Kuijper, J.C.

2013-01-01

The results of this study demonstrate the excellent plutonium and minor actinide burning capabilities of the high temperature reactor. The largest degree of incineration is attained in the case of an HTR fuelled by pure plutonium fuel as it remains critical at very deep burn-up of the discharged pebbles. Addition of minor actinides to the fuel leads to decrease of the achievable discharge burn-up and therefore smaller fraction of actinides incinerated during reactor operation. The inert-matrix fuel design improves the transmutation performance of the reactor, while the “wallpaper” fuel does not have advantage over the standard fuel design in this respect

Life sciences payload definition and integration study. Volume 1: Management summary

Science.gov (United States)

1972-01-01

The objectives of a study program to determine the life sciences payloads required for conducting biomedical experiments during space missions are presented. The objectives are defined as: (1) to identify the research functions which must be performed aboard life sciences spacecraft laboratories and the equipment needed to support these functions and (2) to develop layouts and preliminary conceptual designs of several potential baseline payloads for the accomplishment of life research in space. Payload configurations and subsystems are described and illustrated. Tables of data are included to identify the material requirements for the space missions.

Solar X-ray Spectrometer (SOXS) Mission – Low Energy Payload

Indian Academy of Sciences (India)

2016-01-27

Jan 27, 2016 ... We present the first results from the 'Low Energy Detector' payload of 'Solar X-ray Spectrometer (SOXS)' mission, which was launched onboard GSAT-2 Indian spacecraft on 08 May 2003 by GSLV-D2 rocket to study the solar flares. The SOXS Low Energy Detector (SLD) payload was designed, developed ...

The Athena Science Payload for the 2003 Mars Exploration Rovers

Science.gov (United States)

Squyres, S. W.; Arvidson, R. E.; Bell, J. F., III; Carr, M.; Christensen, P.; DesMarais, D.; Economou, T.; Gorevan, S.; Haskin, L.; Herkenhoff, K.

2001-01-01

The Athena Mars rover payload is a suite of scientific instruments and tools for geologic exploration of the martian surface. It is designed to: (1) Provide color stereo imaging of martian surface environments, and remotely-sensed point discrimination of mineralogical composition. (2) Determine the elemental and mineralogical composition of martian surface materials, including soils, rock surfaces, and rock interiors. (3) Determine the fine-scale textural properties of these materials. Two identical copies of the Athena payload will be flown in 2003 on the two Mars Exploration Rovers. The payload is at a high state of maturity, and first copies of several of the instruments have already been built and tested for flight.

Robotic-Movement Payload Lifter and Manipulator

Science.gov (United States)

Doggett, William R. (Inventor); King, Bruce D. (Inventor); Collins, Timothy J. (Inventor); Dorsey, John T. (Inventor)

2011-01-01

A payload lifter/manipulator module includes a rotatable joint supporting spreader arms angularly spaced with respect to one another. A rigid arm is fixedly coupled to the joint and extends out therefrom to a tip. A tension arm has a first end and a second end with the first end being fixedly coupled to the tip of the rigid arm. The tension arm incorporates pivots along the length thereof. Each pivot can be engaged by or disengaged from the outboard end of a spreader arm based on a position of the spreader arm. A hoist, positioned remotely with respect to the module and coupled to the second end of the tension arm, controls the position of the spreader arms to thereby control the position of the rigid arm's tip. Payload lifter/manipulator assemblies can be constructed with one or more of the modules.

Dual keel Space Station payload pointing system design and analysis feasibility study

Science.gov (United States)

Smagala, Tom; Class, Brian F.; Bauer, Frank H.; Lebair, Deborah A.

1988-01-01

A Space Station attached Payload Pointing System (PPS) has been designed and analyzed. The PPS is responsible for maintaining fixed payload pointing in the presence of disturbance applied to the Space Station. The payload considered in this analysis is the Solar Optical Telescope. System performance is evaluated via digital time simulations by applying various disturbance forces to the Space Station. The PPS meets the Space Station articulated pointing requirement for all disturbances except Shuttle docking and some centrifuge cases.

Design and Implementation of Hitl Simulator Coupleing Communications Payload and Software Spacecraft Bus

Directory of Open Access Journals (Sweden)

In-Jun Kim

2003-12-01

Full Text Available Engineering qualification model payload for a communications and broadcasting satellite(CBS was developed by ETRI from May, 2000 to April, 2003. For the purpose of functional test and verification of the payload, a real-time hardware-in-the-loop(HITL CBS simulator(CBSSIM was also developed. We assumed that the spacecraft platform for the CBSSIM is a geostationary communication satellite using momentum bias three-axis stabilization control technique based on Koreasat. The payload hardware is combined with CBSSIM via Power, Command and Telemetry System(PCTS of Electrical Ground Support Equipment(EGSE. CBSSIM is connected with PCTS by TCP/IP and the payload is combined with PCTS by MIL-STD-1553B protocol and DC harness. This simulator runs under the PC-based simulation environment with Windows 2000 operating system. The satellite commands from the operators are transferred to the payload or bus subsystem models through the real-time process block in the simulator. Design requirements of the CBSSIM are to operate in real-time and generate telemetry. CBSSIM provides various graphic monitoring interfaces and control functions and supports both pre-launch and after-launch of a communication satellite system. In this paper, the HITL simulator system including CBSSIM, communications payload and PCTS as the medium of interface between CBSSIM and communications payload will be described in aspects of the system architecture, spacecraft models, and simulator operation environment.

Life science payloads planning study. [for space shuttle orbiters and spacelab

Science.gov (United States)

Nelson, W. G.; Wells, G. W.

1977-01-01

Preferred approaches and procedures were defined for integrating the space shuttle life sciences payload from experiment solicitation through final data dissemination at mission completion. The payloads operations plan was refined and expended to include current information. The NASA-JSC facility accommodations were assessed, and modifications recommended to improve payload processing capability. Standard format worksheets were developed to permit rapid location of experiment requirements and a Spacelab mission handbook was developed to assist potential life sciences investigators at academic, industrial, health research, and NASA centers. Practical, cost effective methods were determined for accommodating various categories of live specimens during all mission phases.

High resolution metric imaging payload

Science.gov (United States)

Delclaud, Y.

2017-11-01

Alcatel Space Industries has become Europe's leader in the field of high and very high resolution optical payloads, in the frame work of earth observation system able to provide military government with metric images from space. This leadership allowed ALCATEL to propose for the export market, within a French collaboration frame, a complete space based system for metric observation.

End of the nuclear energy era? From Fukushima to the energy policy turnaround; Ende des Atomzeitalters? Von Fukushima in die Energiewende

Energy Technology Data Exchange (ETDEWEB)

Piepenbrink, Johannes (comp.)

2012-07-01

Due to a violent earthquake and the resulting tsunami, a core melt down resulted at the nuclear power plant Fukushima Daiichi in Japan. Thus, at 30th June, 2011, the Federal Government decided to complete the utilization of the nuclear power in Germany. Is this the end of the atomic age? Under this aspect, the booklet under consideration consists of the following nine contributions: (1) Why is the ''energy policy turnaround'' a social question? (Harald Welzer); (2) Tsunami in the living room: Catastrophes facilitated by the media (Joerg R. Bergmann); (3) Learning from the catastrophe (Manfred Buerger); (4) Perspectives of the nuclear power in Europe and globally (Lutz Mez); (5) Outsider or leader? The 'model Germany' and the European energy policy (Severin Fischer); (6) 'Energy policy turnaround': Quo vadis? (Hardo Bruhns); (7) Energy policy turnarounds in Germany: Motifs and impacts for the European electricity market (Hans-Jochen Luhmann); (8) A short story of the German anti-nuclear movement (Joachim Radkau); (9) Popularity of the apocalypse: Reflections on the cultural history of the fear against nuclear accidents since 1945 (Philipp Gassert).

Robot companions and ethics a pragmatic approach of ethical design.

Science.gov (United States)

Cornet, Gérard

2013-12-01

From his experience as ethical expert for two Robot Companion prototype projects aiming at empowering older MCI persons to remain at home and to support their family carers, Gerard Cornet, Gerontologist, review the ethical rules, principles and pragmatic approaches in different cultures. The ethical process of these two funded projects, one European, Companionable (FP7 e-inclusion call1), the other French, Quo vadis (ANR tecsan) are described from the inclusion of the targeted end users in the process, to the assessment and ranking of their main needs and whishes to design the specifications, test the performance expected. Obstacles to turn round and limits for risks evaluation (directs or implicit), acceptability, utility, respect of intimacy and dignity, and balance with freedom and security and frontiers to artificial intelligence are discussed As quoted in the discussion with the French and Japanese experts attending the Toulouse Robotics and medicine symposium (March 26th 2011), the need of a new ethical approach, going further the present ethical rules is needed for the design and social status of ethical robots, having capacity cas factor of progress and global quality of innovation design in an ageing society.

The Atmosphere-Space Interactions Monitor (ASIM) Payload Facility on the ISS

DEFF Research Database (Denmark)

Reibaldi, Giuseppe; Nasca, Rosario; Neubert, Torsten

ASIM is a payload facility to be mounted on a Columbus external platform on the International Space Station (ISS). ASIM will study the coupling of thunderstorm processes to the upper atmosphere, ionosphere and radiation belts. ASIM is the most complex Earth Observation payload facility planned fo...

On-Line, Self-Learning, Predictive Tool for Determining Payload Thermal Response

Science.gov (United States)

Jen, Chian-Li; Tilwick, Leon

2000-01-01

This paper will present the results of a joint ManTech / Goddard R&D effort, currently under way, to develop and test a computer based, on-line, predictive simulation model for use by facility operators to predict the thermal response of a payload during thermal vacuum testing. Thermal response was identified as an area that could benefit from the algorithms developed by Dr. Jeri for complex computer simulations. Most thermal vacuum test setups are unique since no two payloads have the same thermal properties. This requires that the operators depend on their past experiences to conduct the test which requires time for them to learn how the payload responds while at the same time limiting any risk of exceeding hot or cold temperature limits. The predictive tool being developed is intended to be used with the new Thermal Vacuum Data System (TVDS) developed at Goddard for the Thermal Vacuum Test Operations group. This model can learn the thermal response of the payload by reading a few data points from the TVDS, accepting the payload's current temperature as the initial condition for prediction. The model can then be used as a predictive tool to estimate the future payload temperatures according to a predetermined shroud temperature profile. If the error of prediction is too big, the model can be asked to re-learn the new situation on-line in real-time and give a new prediction. Based on some preliminary tests, we feel this predictive model can forecast the payload temperature of the entire test cycle within 5 degrees Celsius after it has learned 3 times during the beginning of the test. The tool will allow the operator to play "what-if' experiments to decide what is his best shroud temperature set-point control strategy. This tool will save money by minimizing guess work and optimizing transitions as well as making the testing process safer and easier to conduct.

Multi-Parameter Wireless Monitoring and Telecommand of a Rocket Payload: Design and Implementation

Science.gov (United States)

Pamungkas, Arga C.; Putra, Alma A.; Puspitaningayu, Pradini; Fransisca, Yulia; Widodo, Arif

2018-04-01

A rocket system generally consists of two parts, the rocket motor and the payload. The payload system is built of several sensors such as accelerometer, gyroscope, magnetometer, and also a surveillance camera. These sensors are used to monitor the rocket in a three-dimensional axis which determine its attitude. Additionally, the payload must be able to perform image capturing in a certain distance using telecommand. This article is intended to describe the design and also the implementation of a rocket payload which has attitude monitoring and telecommand ability from the ground control station using a long-range wireless module Digi XBee Pro 900 HP.

STORED-AND-FORWARD PACKET COMMUNICATION PAYLOAD OF KITSAT 1/2 MICROSATELLITES

Directory of Open Access Journals (Sweden)

Young-Ro Lee

1996-06-01

Full Text Available In this paper, we describe the architecture and protocol of stored-and-forward packet communication payload of KITSAT 1/2 microsatellites and then analyze this payload in terms of the probabilities of login success and login refusal, and maximum throughput as quality of service parameters.

Good, now keep going: challenging the status quo in STEM pipeline and access programs

Science.gov (United States)

Wiseman, Dawn; Herrmann, Randy

2018-03-01

This contribution engages in conversation with McMahon, Griese, and Kenyon (this issue) to consider how the SURE program they describe represents a pragmatic approach to addressing the issue of underrepresentation of Indigenous people in STEM post-secondary programs. We explore how such programs are generally positioned and how they might be positioned differently to challenge the status quo within Western post-secondary institutions. The challenge arises from moving beyond the immediate pragmatics of addressing an identifiable issue framed as a problem to considering how post-secondary institutions and people developing access recruitment programs might begin unlearning colonialism.

Physical punishment of children: can we continue to accept the status quo?

Science.gov (United States)

Oates, Kim

2011-08-01

All children require discipline, although physical punishment is just one form of discipline. Parental use of physical punishment is inter-generational. There is now evidence that physical punishment of children is not only less effective than other forms of discipline but can also lead to aggressive behaviour in childhood and adult life. Twenty-nine countries, including New Zealand, have laws against physical punishment in the home. Australian attitudes are slowly changing in favour of less use of physical punishment, but there is a long way to go. As advocates for children, paediatricians should not be content to accept the status quo. © 2011 The Author. Journal of Paediatrics and Child Health © 2011 Paediatrics and Child Health Division (Royal Australasian College of Physicians).

Quid pro quo: tobacco companies and the black press.

Science.gov (United States)

McCandless, Phyra M; Yerger, Valerie B; Malone, Ruth E

2012-04-01

We explored the relationship between tobacco companies and the Black press, which plays an important role in conveying information and opinions to Black communities. In this archival case study, we analyzed data from internal tobacco industry documents and archives of the National Newspaper Publishers Association (NNPA), the trade association of the Black press. In exchange for advertising dollars and other support, the tobacco industry expected and received support from Black newspapers for tobacco industry policy positions. Beginning in the 1990s, resistance from within the Black community and reduced advertising budgets created counterpressures. The tobacco industry, however, continued to sustain NNPA support. The quid pro quo between tobacco companies and the Black press violated journalistic standards and represented an unequal trade. Although numerous factors explain today's tobacco-related health disparities, the Black press's service to tobacco companies is problematic because of the trust that the community placed in such media. Understanding the relationship between the tobacco industry and the NNPA provides insight into strategies that the tobacco industry may use in other communities and countries.

ISS External Payload Platform - a new opportunity for research in the space environment

Science.gov (United States)

Steimle, Christian; Pape, Uwe

The International Space Station (ISS) is a widely accepted platform for research activities in low Earth orbit. To a wide extent these activities are conducted in the pressurised laboratories of the station and less in the outside environment. Suitable locations outside the ISS are rare, existing facilities fully booked for the coming years. To overcome this limitation, an external payload platform accessible for small size payloads on a commercial basis will be launched to the ISS and installed on the Japanese Experiment Module External Facility (JEM-EF) in the third quarter of 2014 and will be ready to be used by the scientific community on a fully commercial basis. The new External Payload Platform (EPP) and its opportunities and constraints assessed regarding future research activities on-board the ISS. The small size platform is realised in a cooperation between the companies NanoRacks, Astrium North America in the United States, and Airbus Defence and Space in Germany. The hardware allows the fully robotic installation and operation of payloads. In the nominal mission scenario payload items are installed not later than one year after the signature of the contract, stay in operation for 15 weeks, and can be returned to the scientist thereafter. Payload items are transported among the pressurised cargo usually delivered to the station with various supply vehicles. Due to the high frequency of flights and the flexibility of the vehicle manifests the risk of a delay in the payload readiness can be mitigated by delaying to the next flight opportunity which on average is available not more than two months later. The mission is extra-ordinarily fast and of low cost in comparison to traditional research conducted on-board the ISS and can fit into short-term funding cycles available on national and multi-national levels. The size of the payload items is limited by handling constraints on-board the ISS. Therefore, the standard experiment payload size is a multiple of a

Payload specialist Ronald Parise using SAREX

Science.gov (United States)

1995-01-01

ASTRO-2 payload specialist Ronald A. Parise reminisces on his inspace amateur radio experience of five years ago in the ASTRO-1 mission. Using the Shuttle Amateur Radio Experiment (SAREX), Parise talks to students on Earth from the flight deck of the Earth orbiting Space Shuttle Endeavour.

Vibration isolation and dual-stage actuation pointing system for space precision payloads

Science.gov (United States)

Kong, Yongfang; Huang, Hai

2018-02-01

Pointing and stability requirements for future space missions are becoming more and more stringent. This work follows the pointing control method which consists of a traditional spacecraft attitude control system and a payload active pointing loop, further proposing a vibration isolation and dual-stage actuation pointing system for space precision payloads based on a soft Stewart platform. Central to the concept is using the dual-stage actuator instead of the traditional voice coil motor single-stage actuator to improve the payload active pointing capability. Based on a specified payload, the corresponding platform was designed to be installed between the spacecraft bus and the payload. The performance of the proposed system is demonstrated by preliminary closed-loop control investigations in simulations. With the ordinary spacecraft bus, the line-of-sight pointing accuracy can be controlled to below a few milliarcseconds in tip and tilt. Meanwhile, utilizing the voice coil motor with the softening spring in parallel, which is a portion of the dual-stage actuator, the system effectively achieves low-frequency motion transmission and high-frequency vibration isolation along the other four degree-of-freedom directions.

Parachute-Payload System Flight Dynamics and Trajectory Simulation

Directory of Open Access Journals (Sweden)

Giorgio Guglieri

2012-01-01

Full Text Available The work traces a general procedure for the design of a flight simulation tool still representative of the major flight physics of a parachute-payload system along decelerated trajectories. An example of limited complexity simulation models for a payload decelerated by one or more parachutes is given, including details and implementation features usually omitted as the focus of the research in this field is typically on the investigation of mission design issues, rather than addressing general implementation guidelines for the development of a reconfigurable simulation tool. The dynamics of the system are modeled through a simple multibody model that represents the expected behavior of an entry vehicle during the terminal deceleration phase. The simulators are designed according to a comprehensive vision that enforces the simplification of the coupling mechanism between the payload and the parachute, with an adequate level of physical insight still available. The results presented for a realistic case study define the sensitivity of the simulation outputs to the functional complexity of the mathematical model. Far from being an absolute address for the software designer, this paper tries to contribute to the area of interest with some technical considerations and clarifications.

Mathematical Modeling of a Moving Planar Payload Pendulum on Flexible Portal Framework

Directory of Open Access Journals (Sweden)

Edwar Yazid

2012-03-01

Full Text Available Mathematical modeling of a moving planar payload pendulum on elastic portal framework is presented in this paper. The equations of motion of such a system are obtained by modeling the portal frame using finite element in conjunction with moving finite element method and moving planar payload pendulum by using Lagrange’s equations. The generated equations indicate the presence of nonlinear coupling between dynamics of portal framework and the payload pendulum. The combinational direct numerical integration technique, namely Newmarkand fourth-order Runge-Kutta method, is then proposed to solve the coupled equations of motion. Several numerical simulations are performed and the results are verified with several benchmarks. The results indicate that the amplitude and frequency of the payload pendulum swing angle are greatly affected by flexibility of structure and the cable in term of carriage speed. 

ISS Payload Racks Automated Flow Control Calibration Method

Science.gov (United States)

Simmonds, Boris G.

2003-01-01

Payload Racks utilize MTL and/or LTL station water for cooling of payloads and avionics. Flow control range from valves of fully closed, to up to 300 Ibmhr. Instrument accuracies are as high as f 7.5 Ibm/hr for flow sensors and f 3 Ibm/hr for valve controller, for a total system accuracy of f 10.5 Ibm/hr. Improved methodology was developed, tested and proven that reduces accuracy of the commanded flows to less than f 1 Ibmhr. Uethodology could be packed in a "calibration kit" for on- orbit flow sensor checkout and recalibration, extending the rack operations before return to earth. -

A Modular, Reusable Latch and Decking System for Securing Payloads During Launch and Planetary Surface Transport

Science.gov (United States)

Doggett, William R.; Dorsey, John T.; Jones, Thomas C.; King, Bruce D.; Mikulas, Martin M.

2011-01-01

Efficient handling of payloads destined for a planetary surface, such as the moon or mars, requires robust systems to secure the payloads during transport on the ground, in space and on the planetary surface. In addition, mechanisms to release the payloads need to be reliable to ensure successful transfer from one vehicle to another. An efficient payload handling strategy must also consider the devices available to support payload handling. Cranes used for overhead lifting are common to all phases of payload handling on Earth. Similarly, both recent and past studies have demonstrated that devices with comparable functionality will be needed to support lunar outpost operations. A first generation test-bed of a new high performance device that provides the capabilities of both a crane and a robotic manipulator, the Lunar Surface Manipulation System (LSMS), has been designed, built and field tested and is available for use in evaluating a system to secure payloads to transportation vehicles. A payload handling approach must address all phases of payload management including: ground transportation, launch, planetary transfer and installation in the final system. In addition, storage may be required during any phase of operations. Each of these phases requires the payload to be lifted and secured to a vehicle, transported, released and lifted in preparation for the next transportation or storage phase. A critical component of a successful payload handling approach is a latch and associated carrier system. The latch and carrier system should minimize requirements on the: payload, carrier support structure and payload handling devices as well as be able to accommodate a wide range of payload sizes. In addition, the latch should; be small and lightweight, support a method to apply preload, be reusable, integrate into a minimal set of hard-points and have manual interfaces to actuate the latch should a problem occur. A latching system which meets these requirements has been

The VLF Wave and Particle Precipitation Mapper (VPM) Cubesat Payload Suite

Science.gov (United States)

Inan, U.; Linscott, I.; Marshall, R. A.; Lauben, D.; Starks, M. J.; Doolittle, J. H.

2012-12-01

The VLF Wave and Particle Precipitation Mapper (VPM) payload is under development at Stanford University for a Cubesat mission that is planned to fly in low-earth-orbit in 2015. The VPM payload suite includes a 2-meter electric-field dipole antenna; a single-axis magnetic search coil; and a two-channel relativistic electron detector, measuring both trapped and loss-cone electrons. VPM will measure waves and relativistic electrons with the following primary goals: i) develop an improved climatology of plasmaspheric hiss in the L-shell range 1 < L < 3 at all local times; ii) detect VLF waves launched by space-based VLF transmitters, as well as energetic electrons scattered by those in-situ injected waves; iii) develop an improved climatology of lightning-generated whistlers and lightning-induced electron precipitation; iv)measure waves and electron precipitation produced by ground-based VLF transmitters; and v) validate propagation and wave-particle interaction models. In this paper we outline these science objectives of the VPM payload instrument suite, and describe the payload instruments and data products that will meet these science goals.

Nano Entry System for CubeSat-Class Payloads Project (Nano-ADEPT)

Science.gov (United States)

Smith, Brandon Patrick

2014-01-01

This project is developing a mechanically deployed system through a mission application study, deployment/ejection testing, and wind tunnel testing. Adaptable Deployable Entry and Placement Technology (ADEPT) has been under development at NASA since 2011. Nano-ADEPT is the application of this revolutionary entry technology for small spacecraft. The unique capability of ADEPT for small science payloads comes from its ability to stow within a slender volume and deploy passively to achieve a mass-efficient drag surface with a high heat rate capability. Near-term applications for this technology include return of small science payloads or CubeSat technology from Low Earth Orbit (LEO) and delivery of secondary payloads to the surface of Mars.

Automatic maintenance payload on board of a Mexican LEO microsatellite

Science.gov (United States)

Vicente-Vivas, Esaú; García-Nocetti, Fabián; Mendieta-Jiménez, Francisco

2006-02-01

Few research institutions from Mexico work together to finalize the integration of a technological demonstration microsatellite called Satex, aiming the launching of the first ever fully designed and manufactured domestic space vehicle. The project is based on technical knowledge gained in previous space experiences, particularly in developing GASCAN automatic experiments for NASA's space shuttle, and in some support obtained from the local team which assembled the México-OSCAR-30 microsatellites. Satex includes three autonomous payloads and a power subsystem, each one with a local microcomputer to provide intelligent and dedicated control. It also contains a flight computer (FC) with a pair of full redundancies. This enables the remote maintenance of processing boards from the ground station. A fourth communications payload depends on the flight computer for control purposes. A fifth payload was decided to be developed for the satellite. It adds value to the available on-board computers and extends the opportunity for a developing country to learn and to generate domestic space technology. Its aim is to provide automatic maintenance capabilities for the most critical on-board computer in order to achieve continuous satellite operations. This paper presents the virtual computer architecture specially developed to provide maintenance capabilities to the flight computer. The architecture is periodically implemented by software with a small amount of physical processors (FC processors) and virtual redundancies (payload processors) to emulate a hybrid redundancy computer. Communications among processors are accomplished over a fault-tolerant LAN. This allows a versatile operating behavior in terms of data communication as well as in terms of distributed fault tolerance. Obtained results, payload validation and reliability results are also presented.

CETF Space Station payload pointing system design and analysis feasibility study. [Critical Evaluation Task Force

Science.gov (United States)

Smagala, Tom; Mcglew, Dave

1988-01-01

The expected pointing performance of an attached payload coupled to the Critical Evaluation Task Force Space Station via a payload pointing system (PPS) is determined. The PPS is a 3-axis gimbal which provides the capability for maintaining inertial pointing of a payload in the presence of disturbances associated with the Space Station environment. A system where the axes of rotation were offset from the payload center of mass (CM) by 10 in. in the Z axis was studied as well as a system having the payload CM offset by only 1 inch. There is a significant improvement in pointing performance when going from the 10 in. to the 1 in. gimbal offset.

Intuitive Tools for the Design and Analysis of Communication Payloads for Satellites

Science.gov (United States)

Culver, Michael R.; Soong, Christine; Warner, Joseph D.

2014-01-01

In an effort to make future communications satellite payload design more efficient and accessible, two tools were created with intuitive graphical user interfaces (GUIs). The first tool allows payload designers to graphically design their payload by using simple drag and drop of payload components onto a design area within the program. Information about each picked component is pulled from a database of common space-qualified communication components sold by commerical companies. Once a design is completed, various reports can be generated, such as the Master Equipment List. The second tool is a link budget calculator designed specifically for ease of use. Other features of this tool include being able to access a database of NASA ground based apertures for near Earth and Deep Space communication, the Tracking and Data Relay Satellite System (TDRSS) base apertures, and information about the solar system relevant to link budget calculations. The link budget tool allows for over 50 different combinations of user inputs, eliminating the need for multiple spreadsheets and the user errors associated with using them. Both of the aforementioned tools increase the productivity of space communication systems designers, and have the colloquial latitude to allow non-communication experts to design preliminary communication payloads.

A NASA Strategy for Leveraging Emerging Launch Vehicles for Routine, Small Payload Missions

Science.gov (United States)

Underwood, Bruce E.

2005-01-01

Orbital flight opportunities for small payloads have always been few and far between, and then on February 1, 2002, the situation got worse. In the wake of the loss of the Columbia during STS- 107, changing NASA missions and priorities led to the termination of the Shuttle Small Payloads Projects, including Get-Away Special, Hitcbker, and Space Experiment Module. In spite of the limited opportunities, long queue, and restrictions associated with flying experiments on a man-rated transportation system; the carriers provided a sustained, high quality experiment services for education, science, and technology payloads, and was one of the few games in town. Attempts to establish routine opportunities aboard existing ELVs have been unsuccessful, as the cost-per-pound on small ELVs and conflicts with primary spacecraft on larger vehicles have proven prohibitive. Ths has led to a backlog of existing NASA-sponsored payloads and no prospects or plans for fbture opportunities within the NASA community. The prospects for breaking out of this paradigm appear promising as a result of NASA s partnership with DARPA in pursuit of low-cost, responsive small ELVs under the Falcon Program. Through this partnership several new small ELVs, providing 1000 lbs. to LEO will be demonstrated in less than two years that promise costs that are reasonable enough that NASA, DoD, and other sponsors can once again invest in small payload opportunities. Within NASA, planning has already begun. NASA will be populating one or more of the Falcon demonstration flights with small payloads that are already under development. To accommodate these experiments, Goddard s Wallops Flight Facility has been tasked to develop a multi-payload ejector (MPE) to accommodate the needs of these payloads. The MPE capabilities and design is described in detail in a separately submitted abstract. Beyond use of the demonstration flights however, Goddard has already begun developing strategies to leverage these new ELVs

Mission-Aware Payloads for Unmanned Platforms, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Sentix and Brigham Young University propose the research and development of embedded payload intelligence for inflight optimization of surveillance, reconnaissance,...

Live From Space Station Outreach Payload, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The Live from Space Station? Outreach Payload (LFSSOP) is a technologically challenging, exciting opportunity for university students to conduct significant research...

Feature reduction and payload location with WAM steganalysis

Science.gov (United States)

Ker, Andrew D.; Lubenko, Ivans

2009-02-01

WAM steganalysis is a feature-based classifier for detecting LSB matching steganography, presented in 2006 by Goljan et al. and demonstrated to be sensitive even to small payloads. This paper makes three contributions to the development of the WAM method. First, we benchmark some variants of WAM in a number of sets of cover images, and we are able to quantify the significance of differences in results between different machine learning algorithms based on WAM features. It turns out that, like many of its competitors, WAM is not effective in certain types of cover, and furthermore it is hard to predict which types of cover are suitable for WAM steganalysis. Second, we demonstrate that only a few the features used in WAM steganalysis do almost all of the work, so that a simplified WAM steganalyser can be constructed in exchange for a little less detection power. Finally, we demonstrate how the WAM method can be extended to provide forensic tools to identify the location (and potentially content) of LSB matching payload, given a number of stego images with payload placed in the same locations. Although easily evaded, this is a plausible situation if the same stego key is mistakenly re-used for embedding in multiple images.

Osmotic pressure-dependent release profiles of payloads from nanocontainers by co-encapsulation of simple salts

Science.gov (United States)

Behzadi, Shahed; Rosenauer, Christine; Kappl, Michael; Mohr, Kristin; Landfester, Katharina; Crespy, Daniel

2016-06-01

The encapsulation of payloads in micro- to nano-scale capsules allows protection of the payload from the surrounding environment and control of its release profile. Herein, we program the release of hydrophilic payloads from nanocontainers by co-encapsulating simple inorganic salts for adjusting the osmotic pressure. The latter either leads to a burst release at high concentrations of co-encapsulated salts or a sustained release at lower concentrations. Osmotic pressure causes swelling of the nanocapsule's shell and therefore sustained release profiles can be adjusted by crosslinking it. The approach presented allows for programing the release of payloads by co-encapsulating inexpensive salts inside nanocontainers without the help of stimuli-responsive materials.The encapsulation of payloads in micro- to nano-scale capsules allows protection of the payload from the surrounding environment and control of its release profile. Herein, we program the release of hydrophilic payloads from nanocontainers by co-encapsulating simple inorganic salts for adjusting the osmotic pressure. The latter either leads to a burst release at high concentrations of co-encapsulated salts or a sustained release at lower concentrations. Osmotic pressure causes swelling of the nanocapsule's shell and therefore sustained release profiles can be adjusted by crosslinking it. The approach presented allows for programing the release of payloads by co-encapsulating inexpensive salts inside nanocontainers without the help of stimuli-responsive materials. Electronic supplementary information (ESI) available. See DOI: 10.1039/c6nr01882c

Acoustic Noise Prediction of the Amine Swingbed ISS ExPRESS Rack Payload

Science.gov (United States)

Welsh, David; Smith, Holly; Wang, Shuo

2010-01-01

Acoustics plays a vital role in maintaining the health, safety, and comfort of crew members aboard the International Space Station (ISS). In order to maintain this livable and workable environment, acoustic requirements have been established to ensure that ISS hardware and payload developers account for the acoustic emissions of their equipment and develop acoustic mitigations as necessary. These requirements are verified by an acoustic emissions test of the integrated hardware. The Amine Swingbed ExPRESS (Expedite the PRocessing of ExperimentS to Space) rack payload creates a unique challenge to the developers in that the payload hardware is transported to the ISS in phases, making an acoustic emissions test on the integrated flight hardware impossible. In addition, the payload incorporates a high back pressure fan and a diaphragm vacuum pump, which are recognized as significant and complex noise sources. In order to accurately predict the acoustic emissions of the integrated payload, the individual acoustic noise sources and paths are first characterized. These characterizations are conducted though a series of acoustic emissions tests on the individual payload components. Secondly, the individual acoustic noise sources and paths are incorporated into a virtual model of the integrated hardware. The virtual model is constructed with the use of hybrid method utilizing the Finite Element Acoustic (FEA) and Statistical Energy Analysis (SEA) techniques, which predict the overall acoustic emissions. Finally, the acoustic model is validated though an acoustic characterization test performed on an acoustically similar mock-up of the flight unit. The results of the validated acoustic model are then used to assess the acoustic emissions of the flight unit and define further acoustic mitigation efforts.

HOST payload for STS-95 being moved into SSPF

Science.gov (United States)

1998-01-01

The Hubble Space Telescope Orbiting Systems Test (HOST) is checked out by technicians in the Space Shuttle Processing Facility. One of the payloads on the STS-95 mission, the HOST platform is carrying four experiments to validate components planned for installation during the third Hubble Space Telescope servicing mission and to evaluate new technologies in an earth orbiting environment. The STS-95 mission is scheduled to launch Oct. 29. It will carry three other payloads: the Spartan solar- observing deployable spacecraft, the International Extreme Ultraviolet Hitchhiker, and the SPACEHAB single module with experiments on space flight and the aging process.

Expanding the Allowable TRUPACT-II Payload

International Nuclear Information System (INIS)

St Michel, W.; Lott, S.

2002-01-01

The partnership between the Carlsbad Field Office (CBFO) and the TRU and Mixed Waste Focus Area (TMFA) was rewarded when several long-term projects came to fruition. The Nuclear Regulatory Commission (NRC) removed some of the conservatism in the TRUPACT-II Safety Analysis Report for Packaging (SARP) with their approval of Revision 19. The SARP strictly limits the payload constituents to ensure that hydrogen gas and other flammable volatile organic compounds (VOCs) don't build up to flammable/explosive levels while the transuranic (TRU) waste is sealed in the container during shipment. The CBFO/TMFA development program was based on laboratory experiments with surrogate waste materials, real waste experiments, and theoretical modeling that were used to justify payload expansion. Future work to expand the shipping envelope of the TRUPACT-II focuses on increasing the throughput through the waste certification process and reducing the waste operations costs by removing the need for a repack aging and/or treatment capability or reducing the size of the needed repackaging/treatment capability

Payload Configurations for Efficient Image Acquisition - Indian Perspective

Science.gov (United States)

Samudraiah, D. R. M.; Saxena, M.; Paul, S.; Narayanababu, P.; Kuriakose, S.; Kiran Kumar, A. S.

2014-11-01

sounder for providing vertical profile of water vapour, temperature, etc. The same system has data relay transponders for acquiring data from weather stations. The payload configurations have gone through significant changes over the years to increase data rate per kilogram of payload. Future Indian remote sensing systems are planned with very high efficient ways of image acquisition. This paper analyses the strides taken by ISRO (Indian Space research Organisation) in achieving high efficiency in remote sensing image data acquisition. Parameters related to efficiency of image data acquisition are defined and a methodology is worked out to compute the same. Some of the Indian payloads are analysed with respect to some of the system/ subsystem parameters that decide the configuration of payload. Based on the analysis, possible configuration approaches that can provide high efficiency are identified. A case study is carried out with improved configuration and the results of efficiency improvements are reported. This methodology may be used for assessing other electro-optical payloads or missions and can be extended to other types of payloads and missions.

Optimal design and experimental analyses of a new micro-vibration control payload-platform

Science.gov (United States)

Sun, Xiaoqing; Yang, Bintang; Zhao, Long; Sun, Xiaofen

2016-07-01

This paper presents a new payload-platform, for precision devices, which possesses the capability of isolating the complex space micro-vibration in low frequency range below 5 Hz. The novel payload-platform equipped with smart material actuators is investigated and designed through optimization strategy based on the minimum energy loss rate, for the aim of achieving high drive efficiency and reducing the effect of the magnetic circuit nonlinearity. Then, the dynamic model of the driving element is established by using the Lagrange method and the performance of the designed payload-platform is further discussed through the combination of the controlled auto regressive moving average (CARMA) model with modified generalized prediction control (MGPC) algorithm. Finally, an experimental prototype is developed and tested. The experimental results demonstrate that the payload-platform has an impressive potential of micro-vibration isolation.

CSR communication: Quo vadis? A systematic review of the literature and introduction to the special issue

NARCIS (Netherlands)

Golob, U.; Elving, W.; Thomsen, C.; Podnar, K.; Nielsen, A.; Schultz, F.

2013-01-01

This paper aims to introduce the special issue on CSR communication attached to the First International CSR Communication Conference held in Amsterdam in October 2011. The aim of the introduction is also to review CSR communication papers published in scholarly journals in order to make a summary of

Genetically Engineered Islets and Alternative Sources of Insulin-Producing Cells for Treating Autoimmune Diabetes: Quo Vadis?

Directory of Open Access Journals (Sweden)

Feng-Cheng Chou

2012-01-01

Full Text Available Islet transplantation is a promising therapy for patients with type 1 diabetes that can provide moment-to-moment metabolic control of glucose and allow them to achieve insulin independence. However, two major problems need to be overcome: (1 detrimental immune responses, including inflammation induced by the islet isolation/transplantation procedure, recurrence autoimmunity, and allorejection, can cause graft loss and (2 inadequate numbers of organ donors. Several gene therapy approaches and pharmaceutical treatments have been demonstrated to prolong the survival of pancreatic islet grafts in animal models; however, the clinical applications need to be investigated further. In addition, for an alternative source of pancreatic β-cell replacement therapy, the ex vivo generation of insulin-secreting cells from diverse origins of stem/progenitor cells has become an attractive option in regenerative medicine. This paper focuses on the genetic manipulation of islets during transplantation therapy and summarizes current strategies to obtain functional insulin-secreting cells from stem/progenitor cells.

The future of high-strength copper base conductor materials; Hochfeste Leitermaterialien auf Kupfer-Basis: quo vadis?

Energy Technology Data Exchange (ETDEWEB)

Freudenberger, J.; Botcharova, E.; Gaganov, A.; Lyubimova, J.; Schultz, L. [Institut fuer Festkoerper- und Werkstofforschung Dresden e.V. (Germany). Inst. fuer Metallische Werkstoffe; Witte, H.; Jones, H. [Oxford Univ. (United Kingdom). Dept. of Physics; Hermannsdoerfer, T.; Zherlitsyn, S.; Wosnitza, J. [Forschungszentrum Rossendorf e.V. (FZR), Dresden (Germany). Hochfeld-Magnetlabor; Givord, D. [Institut Neel, Grenoble (France); Barthem, V.M.T.S. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Inst. de Fisica; Boettcher, R.D.; Hannemann, K. [DLR Deutsches Zentrum fuer Luft- und Raumfahrt e.V., Goettingen (Germany). Inst. fuer Aerodynamik und Stroemungstechnik

2008-07-01

Conductor materials with specific mechanical properties are required in many fields of science and industry. They are optimised selectively to achieve certain properties and optimum functionality, which often makes them a key component of the system in which they are used. This contribution describes current and future applications of the copper base high-strength conductor materials developed at IFW Dresden. (orig.)

Online payload estimation for the control of underactuated mechanical systems

International Nuclear Information System (INIS)

Lu, Yu Sheng; Chiu, Hua Hsu

2014-01-01

This paper presents a payload estimation scheme for underactuated robotic manipulators with passive joints that are not driven by actuators. In the proposed scheme, only the payload, which can be quite uncertain when a robot performs various tasks, is estimated, because the manipulator's electrical and other mechanical parameters are generally known in advance. In comparison to other adaptive schemes for underactuated robotic manipulators, the proposed scheme produces satisfactory transient performance and also reduces the computational burden in real-time implementation. The proposed estimation law is also based on the theory of Variable Structure Systems. In contrast to existing adaptation laws that have an integral form, the proposed law estimates uncertain payload using lowpass filtering of a switching signal that is always bounded, which avoids the parameter-drifting problem that is often encountered when using the previous integral laws. Real-time experiments are conducted using an inverted pendulum and the experimental results demonstrate the feasibility and effectiveness of the proposed scheme.

Three-Axis Gasless Sounding Rocket Payload Attitude Control

Data.gov (United States)

National Aeronautics and Space Administration — Gas released by current sounding rocket payload attitude control systems (ACS) has the potential to interfere with some types of science instruments. A single-axis...

TRU waste certification and TRUPACT-2 payload verification

International Nuclear Information System (INIS)

Hunter, E.K.; Johnson, J.E.

1990-01-01

The Waste Isolation Pilot Plant (WIPP) established a policy that requires each waste shipper to verify that all waste shipments meet the requirements of the Waste Acceptance Criteria (WAC) prior to being shipped. This verification provides assurance that transuranic (TRU) wastes meet the criteria while still retained in a facility where discrepancies can be immediately corrected. Each Department of Energy (DOE) TRU waste facility planning to ship waste to the Waste Isolation Pilot Plant (WIPP) is required to develop and implement a specific program including Quality Assurance (QA) provisions to verify that waste is in full compliance with WIPP's WAC. This program is audited by a composite DOE and contractor audit team prior to granting the facility permission to certify waste. During interaction with the Nuclear Regulatory Commission (NRC) on payload verification for shipping in TRUPACT-II, a similar system was established by DOE. The TRUPACT-II Safety Analysis Report (SAR) contains the technical requirements and physical and chemical limits that payloads must meet (like the WAC). All shippers must plan and implement a payload control program including independent QA provisions. A similar composite audit team will conduct preshipment audits, frequent subsequent audits, and operations inspections to verify that all TRU waste shipments in TRUPACT-II meet the requirements of the Certificate of Compliance issued by the NRC which invokes the SAR requirements. 1 fig

The first Spacelab payload - A joint NASA/ESA venture

Science.gov (United States)

Kennedy, R.; Pace, R.; Collet, J.; Sanfourche, J. P.

1977-01-01

Planning for the 1980 qualification flight of Spacelab, which will involve a long module and one pallet, is discussed. The mission will employ two payload specialists, one sponsored by NASA and the other by ESA. Management of the Spacelab mission functions, including definition and execution of the on-board experiments, development of the experimental hardware and training of the payload specialists, is considered; studies proposed in the areas of atmospheric physics, space plasma physics, solar physics, earth observations, astronomy, astrophysics, life sciences and material sciences are reviewed. Analyses of the Spacelab environment and the Spacelab-to-orbiter and Spacelab-to-experiment interactions are also planned.

Smart and intelligent sensor payload project

Science.gov (United States)

2009-01-01

Engineers working on the smart and intelligent sensor payload project include (l to r): Ed Conley (NASA), Mark Mitchell (Jacobs Technology), Luke Richards (NASA), Robert Drackett (Jacobs Technology), Mark Turowski (Jacobs Technology) , Richard Franzl (seated, Jacobs Technology), Greg McVay (Jacobs Technology), Brianne Guillot (Jacobs Technology), Jon Morris (Jacobs Technology), Stephen Rawls (NASA), John Schmalzel (NASA) and Andrew Bracey (NASA).

Secondary charging effects due to icy dust particle impacts on rocket payloads

Directory of Open Access Journals (Sweden)

M. Kassa

2012-03-01

Full Text Available We report measurements of dust currents obtained with a small probe and a larger probe during the flight of the ECOMA-4 rocket through the summer polar mesosphere. The payload included two small dust probes behind a larger dust probe located centrally at the front. For certain phases of the payload rotation, the current registered by one of the small dust probes was up to 2 times the current measured with the larger probe, even though the effective collection area of the larger probe was 4 times that of the small one. We analyze the phase dependence of the currents and their difference with a model based on the assumption that the small probe was hit by charged dust fragments produced in collisions of mesospheric dust with the payload body. Our results confirm earlier findings that secondary charge production in the collision of a noctilucent cloud/Polar Summer Mesospheric Echo (NLC/PMSE dust particle with the payload body must be several orders of magnitude larger than might be expected from laboratory studies of collisions of pure ice particles with a variety of clean surfaces. An important consequence is that for some payload configurations, one should not assume that the current measured with a detector used to study mesospheric dust is simply proportional to the number density of ambient dust particles. The higher secondary charge production may be due to the NLC/PMSE particles containing multiple meteoric smoke particles.

Design decisions from the history of the EUVE science payload

Science.gov (United States)

Marchant, W.

1993-01-01

Some of the design issues that arose during the development of the EUVE science payload and solutions to the problems involved are examined. In particular, attention is given to the use of parallel and serial busses, the selection of the the ROM approach for software storage and execution, implementation of memory error detection and correction, and the selection of command structures. The early design decisions paid off in the timely delivery of the scientific payload and in the successful completion of the survey phase of the EUVE science mission.

Operations planning simulation model extension study. Volume 1: Long duration exposure facility ST-01-A automated payload

Science.gov (United States)

Marks, D. A.; Gendiellee, R. E.; Kelly, T. M.; Giovannello, M. A.

1974-01-01

Ground processing and operation activities for selected automated and sortie payloads are evaluated. Functional flow activities are expanded to identify payload launch site facility and support requirements. Payload definitions are analyzed from the launch site ground processing viewpoint and then processed through the expanded functional flow activities. The requirements generated from the evaluation are compared with those contained in the data sheets. The following payloads were included in the evaluation: Long Duration Exposure Facility; Life Sciences Shuttle Laboratory; Biomedical Experiments Scientific Satellite; Dedicated Solar Sortie Mission; Magnetic Spectrometer; and Mariner Jupiter Orbiter. The expanded functional flow activities and descriptions for the automated and sortie payloads at the launch site are presented.

Change and status quo in decisions with defaults: The effect of incidental emotions depends on the type of default

OpenAIRE

Shevchenko, Yury; von Helversen, Bettina; Scheibehenne, Benjamin

2014-01-01

Affective states can change how people react to measures aimed at influencing their decisions such as providing a default option. Previous research has shown that when defaults maintain the status quo positive mood increases reliance on the default and negative mood decreases it. Similarly, it has been demonstrated that positive mood enhances the preference for inaction. We extend this research by investigating how mood states influence reliance on the default if the defa...

Regenerative Payload for GSAT-3 & Advanced Communication ...

Indian Academy of Sciences (India)

First page Back Continue Last page Overview Graphics. Regenerative Payload for GSAT-3 & Advanced Communication Series Satellite. GSAT-4. 8 Ka -Band Spot Beams; 8 Narrow Band (64Kbps) Channels/ Beam; 1 Wide Band (2Mbps) Channel/ Beam;; 64 Kbps Signaling Channel; On-Board Switch Matrix; 8 Channel ...

Hosting the first EDRS payload

Science.gov (United States)

Poncet, D.; Glynn, S.; Heine, F.

2017-11-01

The European Data Relay System (EDRS) will provide optical and microwave data relay services between Low Earth Orbit (LEO) satellites at altitudes up to 2000 km and the ground through geostationary (GEO) satellite nodes. Currently, two such nodes have been procured as part of a Public Private Partnership (PPP) between Astrium (now Airbus Defence and Space) and ESA. The first node (EDRS-A) is a hosted payload embarked upon the Eutelsat 9B satellite and scheduled for launch in early 2015.

Life sciences payload definition and integration study, task C and D. Volume 2: Payload definition, integration, and planning studies

Science.gov (United States)

1973-01-01

The Life Sciences Payload Definition and Integration Study was composed of four major tasks. Tasks A and B, the laboratory definition phase, were the subject of prior NASA study. The laboratory definition phase included the establishment of research functions, equipment definitions, and conceptual baseline laboratory designs. These baseline laboratories were designated as Maxi-Nom, Mini-30, and Mini-7. The outputs of Tasks A and B were used by the NASA Life Sciences Payload Integration Team to establish guidelines for Tasks C and D, the laboratory integration phase of the study. A brief review of Tasks A and B is presented provide background continuity. The tasks C and D effort is the subject of this report. The Task C effort stressed the integration of the NASA selected laboratory designs with the shuttle sortie module. The Task D effort updated and developed costs that could be used by NASA for preliminary program planning.

A Review Of The United States Government’s Status Quo North Korean Foreign Policy Approach And Reasons For Change

Science.gov (United States)

2016-02-16

AIR WAR COLLEGE AIR UNIVERSITY A REVIEW OF THE UNITED STATES GOVERNMENT’S STATUS QUO NORTH KOREAN FOREIGN POLICY APPROACH AND REASONS FOR...administration DPRK policy review . Initially the Obama administration also sought negotiations through Six-party offering official US aid. In his... movies and sports, as well as being educated in Switzerland. Mr. Kim invited Dennis Rodman to visit his country, who has made several trips.44 Former

An embedded acceleration measurement capability for EXPRESS Rack Payloads

International Nuclear Information System (INIS)

Foster, William M. II; Sutliff, Thomas J.

2000-01-01

The International Space Station provides a microgravity environment allowing long duration studies to be made on phenomena masked by the presence of earth's gravitational effects. Studies are also enabled in areas requiring a substantial decrease in steady-state and vibratory acceleration environments. In anticipation microgravity science experiments being targeted for EXPRESS (EXpedite the PRocessing of Experiments to Space Station) Racks, a capability has been provided to simplify and conduct a consistent measurement of the microgravity environment for payloads. The Space Acceleration Measurement System-II (SAMS-II) project has collaborated with the EXPRESS Rack Project to embed an electronics unit within the four EXPRESS Racks equipped with Active Rack Isolation Systems (ARIS). Each SAMS-II unit provides a standardized means for payload acceleration measurements to be acquired. Access to this capability is via front panel connections similar to those of power, data and water cooling provided for EXPRESS payloads. Furthermore, an International Subrack Interface Standard (ISIS) drawer configuration has been developed to provide measurement capability to the non-ARIS equipped EXPRESS Racks, as well as to other ISIS-configured racks, for non-isolated experimental measurement needs. This paper describes the SAMS-II acceleration measurement capabilities provided to ISS users and, in particular, to the EXPRESS Rack community

STS-102 Onboard Photograph-The Payload Equipment Restraint System

Science.gov (United States)

2001-01-01

In this Space Shuttle STS-102 mission image, the Payload Equipment Restraint System H-Strap is shown at the left side of the U.S. Laboratory hatch and behind Astronaut James D. Weatherbee, mission specialist. PERS is an integrated modular system of components designed to assist the crew of the International Space Station (ISS) in restraining and carrying necessary payload equipment and tools in a microgravity environment. The Operations Development Group, Flight Projects Directorate at the Marshall Space Flight Center (MSFC), while providing operation support to the ISS Materials Science Research Facility (MSRF), recognized the need for an on-orbit restraint system to facilitate control of lose objects, payloads, and tools. The PERS is the offspring of that need and it helps the ISS crew manage tools and rack components that would otherwise float away in the near-zero gravity environment aboard the Space Station. The system combines Kevlar straps, mesh pockets, Velcro and a variety of cornecting devices into a portable, adjustable system. The system includes the Single Strap, the H-Strap, the Belly Pack, the Laptop Restraint Belt, and the Tool Page Case. The Single Strap and the H-Strap were flown on this mission. The PERS concept was developed by industrial design students at Auburn University and the MSFC Flight Projects Directorate.

Determining the status quo of infection prevention and control standards in the hospitals of iran: a case study in 23 hospitals.

Science.gov (United States)

Shojaee, Jalil; Moosazadeh, Mahmood

2014-02-01

Applying Prevention and Control of Infection (PCI) standards in hospitals reduces probable risks to patients, staff and visitors; it also increases efficiency, and ultimately improves productivity of hospitals. The current study aimed to determine the status quo of international standards of PCI in hospitals located in the north of Iran. This cross-sectional study was conducted in 23 hospitals. Data collection tool was a questionnaire with confirmed validity and reliability. . In this regard, 260 managers, section supervisors and infection control nurses participated in the study according to census basis. SPSS software version 16 was employed to analyze the data through descriptive and analytical statistics. Among the studied hospitals, 18 hospitals were public. Hospitals enjoyed 77.2% of leadership and programming, 80.8% of focus of programs, 67.4% of isolating methods, 88.2% of hand health and protection techniques, 78.8% of improving patient's safety and quality, 90.3% of training personnel, and 78.7% of the average status quo of PCI standards. This study revealed that PCI standards were significantly observed in the studied hospitals and that there were necessary conditions for full deployment of nosocomial infection surveillance.

An integrated Ka/Ku-band payload for personal, mobile and private business communications

Science.gov (United States)

Hayes, Edward J.; Keelty, J. Malcolm

1991-01-01

The Canadian Department of Communications has been studying options for a government-sponsored demonstration payload to be launched before the end of the century. A summary of the proposed system concepts and network architectures for providing an advanced private business network service at Ku-band and personal and mobile communications at Ka-band is presented. The system aspects addressed include coverage patterns, traffic capacity, and grade of service, multiple access options as well as special problems, such as Doppler in mobile applications. Earth terminal types and the advanced payload concept proposed in a feasibility study for the demonstration mission are described. This concept is a combined Ka-band/Ku-band payload which incorporates a number of advanced satellite technologies including a group demodulator to convert single-channel-per-carrier frequency division multiple access uplink signals to a time division multiplex downlink, on-board signal regeneration, and baseband switching to support packet switched data operation. The on-board processing capability of the payload provides a hubless VSAT architecture which permits single-hop full mesh interconnectivity. The Ka-band and Ku-band portions of the payload are fully integrated through an on-board switch, thereby providing the capability for fully integrated services, such as using the Ku-band VSAT terminals as gateway stations for the Ka-band personal and mobile communications services.

[Instruments of management accounting in german hospitals - potentials for competitive advantage and status quo].

Science.gov (United States)

Berens, W; Lachmann, M; Wömpener, A

2011-03-01

The aim of this study is to provide an analysis of the status quo for the usage of instruments of management accounting in German hospitals. 600 managing directors of German hospitals were asked to answer a questionnaire about the usage of management accounting instruments in their hospitals. We obtained 121 usable datasets, which are evaluated in this study. A significant increase in the usage of management accounting instruments can be observed over time. The respondents have an overall positive perception of the usage of these instruments. Cost accounting and information systems are among the most widely used instruments, while widely discussed concepts like the balanced scorecard or clinical pathways show surprisingly low usage rates. © Georg Thieme Verlag KG Stuttgart · New York.

Numerical Estimation of Sound Transmission Loss in Launch Vehicle Payload Fairing

Science.gov (United States)

Chandana, Pawan Kumar; Tiwari, Shashi Bhushan; Vukkadala, Kishore Nath

2017-08-01

Coupled acoustic-structural analysis of a typical launch vehicle composite payload faring is carried out, and results are validated with experimental data. Depending on the frequency range of interest, prediction of vibro-acoustic behavior of a structure is usually done using the finite element method, boundary element method or through statistical energy analysis. The present study focuses on low frequency dynamic behavior of a composite payload fairing structure using both coupled and uncoupled vibro-acoustic finite element models up to 710 Hz. A vibro-acoustic model, characterizing the interaction between the fairing structure, air cavity, and satellite, is developed. The external sound pressure levels specified for the payload fairing's acoustic test are considered as external loads for the analysis. Analysis methodology is validated by comparing the interior noise levels with those obtained from full scale Acoustic tests conducted in a reverberation chamber. The present approach has application in the design and optimization of acoustic control mechanisms at lower frequencies.

Fuzzy crane control with sensorless payload deflection feedback for vibration reduction

Science.gov (United States)

Smoczek, Jaroslaw

2014-05-01

Different types of cranes are widely used for shifting cargoes in building sites, shipping yards, container terminals and many manufacturing segments where the problem of fast and precise transferring a payload suspended on the ropes with oscillations reduction is frequently important to enhance the productivity, efficiency and safety. The paper presents the fuzzy logic-based robust feedback anti-sway control system which can be applicable either with or without a sensor of sway angle of a payload. The discrete-time control approach is based on the fuzzy interpolation of the controllers and crane dynamic model's parameters with respect to the varying rope length and mass of a payload. The iterative procedure combining a pole placement method and interval analysis of closed-loop characteristic polynomial coefficients is proposed to design the robust control scheme. The sensorless anti-sway control application developed with using PAC system with RX3i controller was verified on the laboratory scaled overhead crane.

Using Pre-melted Phase Change Material to Keep Payload Warm without Power for Hours in Space

Science.gov (United States)

Choi, Michael K.

2012-01-01

During a payload transition from the transport vehicle to its worksite on the International Space Station (ISS), the payload is unpowered for up to 6 hours. Its radiator(s) will continue to radiate heat to space. It is necessary to make up the heat loss to maintain the payload temperature above the cold survival limit. Typically an interplanetary Probe has no power generation system. It relies on its battery to provide limited power for the Communication and Data Handling (C&DH) subsystem during cruise, and heater power is unavailable. It is necessary to maintain the C&DH temperature above the minimum operating limit. This paper presents a novel thermal design concept that utilizes phase change material (PCM) to store thermal energy by melting it before the payload or interplanetary Probe is unpowered. For the ISS, the PCM is melted by heaters just prior to the payload transition from the transport vehicle to its worksite. For an interplanetary Probe, the PCM is melted by heaters just prior to separation from the orbiter. The PCM releases thermal energy to keep the payload warm for several hours after power is cut off.

The Science Payload of the LOFT Mission

DEFF Research Database (Denmark)

Feroci, Marco; den Herder, J.; van der Klis, M.

The scientific payload onboard the Large Observatory For x-ray Timing mission (LOFT, see presentation by P. Ray et al. at this meeting) is composed of two instruments, the Large Area Detector (LAD, 10 m2 effective area in the primary energy range 2-30 keV, 1-deg collimated field of view) and the ...

Cost prediction model for various payloads and instruments for the Space Shuttle Orbiter

Science.gov (United States)

Hoffman, F. E.

1984-01-01

The following cost parameters of the space shuttle were undertaken: (1) to develop a cost prediction model for various payload classes of instruments and experiments for the Space Shuttle Orbiter; and (2) to show the implications of various payload classes on the cost of: reliability analysis, quality assurance, environmental design requirements, documentation, parts selection, and other reliability enhancing activities.

Payload characterization for CubeSat demonstration of MEMS deformable mirrors

Science.gov (United States)

Marinan, Anne; Cahoy, Kerri; Webber, Matthew; Belikov, Ruslan; Bendek, Eduardo

2014-08-01

Coronagraphic space telescopes require wavefront control systems for high-contrast imaging applications such as exoplanet direct imaging. High-actuator-count MEMS deformable mirrors (DM) are a key element of these wavefront control systems yet have not been flown in space long enough to characterize their on-orbit performance. The MEMS Deformable Mirror CubeSat Testbed is a conceptual nanosatellite demonstration of MEMS DM and wavefront sensing technology. The testbed platform is a 3U CubeSat bus. Of the 10 x 10 x 34.05 cm (3U) available volume, a 10 x 10 x 15 cm space is reserved for the optical payload. The main purpose of the payload is to characterize and calibrate the onorbit performance of a MEMS deformable mirror over an extended period of time (months). Its design incorporates both a Shack Hartmann wavefront sensor (internal laser illumination), and a focal plane sensor (used with an external aperture to image bright stars). We baseline a 32-actuator Boston Micromachines Mini deformable mirror for this mission, though the design is flexible and can be applied to mirrors from other vendors. We present the mission design and payload architecture and discuss experiment design, requirements, and performance simulations.

Vertical dynamics of a single-span beam subjected to moving mass-suspended payload system with variable speeds

Science.gov (United States)

He, Wei

2018-03-01

This paper presents the vertical dynamics of a simply supported Euler-Bernoulli beam subjected to a moving mass-suspended payload system of variable velocities. A planar theoretical model of the moving mass-suspended payload system of variable speeds is developed based on several assumptions: the rope is massless and rigid, and its length keeps constant; the stiffness of the gantry beam is much greater than the supporting beam, and the gantry beam can be treated as a mass particle traveling along the supporting beam; the supporting beam is assumed as a simply supported Bernoulli-Euler beam. The model can be degenerated to consider two classical cases-the moving mass case and the moving payload case. The proposed model is verified using both numerical and experimental methods. To further investigate the effect of possible influential factors, numerical examples are conducted covering a range of parameters, such as variable speeds (acceleration or deceleration), mass ratios of the payload to the total moving load, and the pendulum lengths. The effect of beam flexibility on swing response of the payload is also investigated. It is shown that the effect of a variable speed is significant for the deflections of the beam. The accelerating movement tends to induce larger beam deflections, while the decelerating movement smaller ones. For accelerating or decelerating movements, the moving mass model may underestimate the deflections of the beam compared with the presented model; while for uniform motion, both the moving mass model and the moving mass-payload model lead to same beam responses. Furthermore, it is observed that the swing response of the payload is not sensitive to the stiffness of the beam for operational cases of a moving crane, thus a simple moving payload model can be employed in the swing control of the payload.

Payload charging events in the mesosphere and their impact on Langmuir type electric probes

Directory of Open Access Journals (Sweden)

T. A. Bekkeng

2013-02-01

Full Text Available Three sounding rockets were launched from Andøya Rocket Range in the ECOMA campaign in December 2010. The aim was to study the evolution of meteoric smoke particles during a major meteor shower. Of the various instruments onboard the rocket payload, this paper presents the data from a multi-Needle Langmuir Probe (m-NLP and a charged dust detector. The payload floating potential, as observed using the m-NLP instrument, shows charging events on two of the three flights. These charging events cannot be explained using a simple charging model, and have implications towards the use of fixed bias Langmuir probes on sounding rockets investigating mesospheric altitudes. We show that for a reliable use of a single fixed bias Langmuir probe as a high spatial resolution relative density measurement, each payload should also carry an additional instrument to measure payload floating potential, and an instrument that is immune to spacecraft charging and measures absolute plasma density.

STS-47 MS Davis trains at Payload Crew Training Complex at Marshall SFC

Science.gov (United States)

1992-01-01

STS-47 Endeavour, Orbiter Vehicle (OV) 105, Mission Specialist (MS) N. Jan Davis, wearing the Autogenic Feedback Training System 2 suit and lightweight headset, reviews a Payload Systems Handbook in the Spacelab Japan (SLJ) mockup during training at the Payload Crew Training Complex at Marshall Space Flight Center (MSFC) in Huntsville, Alabama. View provided with alternate number 92P-137.

Highly integrated Pluto payload system (HIPPS): a sciencecraft instrument for the Pluto mission

Science.gov (United States)

Stern, S. Alan; Slater, David C.; Gibson, William; Reitsema, Harold J.; Delamere, W. Alan; Jennings, Donald E.; Reuter, D. C.; Clarke, John T.; Porco, Carolyn C.; Shoemaker, Eugene M.; Spencer, John R.

1995-09-01

We describe the design concept for the highly integrated Pluto payload system (HIPPS): a highly integrated, low-cost, light-weight, low-power instrument payload designed to fly aboard the proposed NASA Pluto flyby spacecraft destined for the Pluto/Charon system. The HIPPS payload is designed to accomplish all of the Pluto flyby prime (IA) science objectives, except radio science, set forth by NASA's Outer Planets Science Working Group (OPSWG) and the Pluto Express Science Definition Team (SDT). HIPPS contains a complement of three instrument components within one common infrastructure; these are: (1) a visible/near UV CCD imaging camera; (2) an infrared spectrograph; and (3) an ultraviolet spectrograph. A detailed description of each instrument is presented along with how they will meet the IA science requirements.

UV Stellar Distribution Model for the Derivation of Payload

Directory of Open Access Journals (Sweden)

Young-Jun Choi

1999-12-01

Full Text Available We present the results of a model calculation of the stellar distribution in a UV and centered at 2175Å corresponding to the well-known bump in the interstellar extinction curve. The stellar distribution model used here is based on the Bahcall-Soneira galaxy model (1980. The source code for model calculation was designed by Brosch (1991 and modified to investigate various designing factors for UV satellite payload. The model predicts UV stellar densities in different sky directions, and its results are compared with the TD-1 star counts for a number of sky regions. From this study, we can determine the field of view, size of optics, angular resolution, and number of stars in one orbit. There will provide the basic constrains in designing a satellite payload for UV observations.

STS-35 payload specialists perform balancing act on OV-102's middeck

Science.gov (United States)

1990-01-01

Aided by the microgravity environment aboard Columbia, Orbiter Vehicle (OV) 102, STS-35 Payload Specialist Ronald A. Parise balances Payload Specialist Samuel T. Durrance on his index finger in front of the middeck starboard wall. Durrance is wearing a blood pressure cuff and is holding a beverage container and food package during the microgravity performance. The waste management compartment (WMC), side hatch, and orbiter galley are seen behind the two crewmembers. Durrance's feet are at the forward lockers.

Operational plans for life science payloads - From experiment selection through postflight reporting

Science.gov (United States)

Mccollum, G. W.; Nelson, W. G.; Wells, G. W.

1976-01-01

Key features of operational plans developed in a study of the Space Shuttle era life science payloads program are presented. The data describes the overall acquisition, staging, and integration of payload elements, as well as program implementation methods and mission support requirements. Five configurations were selected as representative payloads: (a) carry-on laboratories - medical emphasis experiments, (b) mini-laboratories - medical/biology experiments, (c) seven-day dedicated laboratories - medical/biology experiments, (d) 30-day dedicated laboratories - Regenerative Life Support Evaluation (RLSE) with selected life science experiments, and (e) Biomedical Experiments Scientific Satellite (BESS) - extended duration primate (Type I) and small vertebrate (Type II) missions. The recommended operational methods described in the paper are compared to the fundamental data which has been developed in the life science Spacelab Mission Simulation (SMS) test series. Areas assessed include crew training, experiment development and integration, testing, data-dissemination, organization interfaces, and principal investigator working relationships.

International Cooperation in the Field of International Space Station (ISS) Payload Safety

Science.gov (United States)

Grayson, C.; Sgobba, T.; Larsen, A.; Rose, S.; Heimann, T.; Ciancone, M.; Mulhern, V.

2005-12-01

In the frame of the International Space Station (ISS) Program cooperation, in 1998 the European Space Agency (ESA) approached the National Aeronautics and Space Administration (NASA) with the unique concept of a Payload Safety Review Panel (PSRP) "franchise" based at the European Space Technology Center (ESTEC), where the panel would be capable of autonomously reviewing flight hardware for safety. This paper will recount the course of an ambitious idea as it progressed into a fully functional reality. It will show how a panel initially conceived at NASA to serve a national programme has evolved into an international safety cooperation asset. The PSRP established at NASA began reviewing ISS payloads approximately in late 1994 or early 1995 as an expansion of the pre- existing Shuttle Program PSRP. This paper briefly describes the fundamental Shuttle safety process and the establishment of the safety requirements for payloads intending to use the Space Transportation System and ISS. The paper will also offer some historical statistics about the experiments that completed the payload safety process for Shuttle and ISS. The paper then presents the background of ISS agreements and international treaties that had to be considered when establishing the ESA PSRP. The paper will expound upon the detailed franchising model, followed by an outline of the cooperation charter approved by the NASA Associate Administrator, Office of Space Flight, and ESA Director of Manned Spaceflight and Microgravity. The paper will then address the resulting ESA PSRP implementation and its success statistics to date. Additionally, the paper presents ongoing developments with the Japan Aerospace Exploration Agency (JAXA). The discussion will conclude with ideas for future developments, such to achieve a fully integrated international system of payload safety panels for ISS.

International Cooperation in the Field of International Space Station (ISS) Payload Safety

Science.gov (United States)

Heimann, Timothy; Larsen, Axel M.; Rose, Summer; Sgobba, Tommaso

2005-01-01

In the frame of the International Space Station (ISS) Program cooperation, in 1998, the European Space Agency (ESA) approached the National Aeronautics and Space Administration (NASA) with the unique concept of a Payload Safety Review Panel (PSRP) "franchise" based at the European Space Technology Center (ESTEC), where the panel would be capable of autonomously reviewing flight hardware for safety. This paper will recount the course of an ambitious idea as it progressed into a fully functional reality. It will show how a panel initially conceived at NASA to serve a national programme has evolved into an international safety cooperation asset. The PSRP established at NASA began reviewing ISS payloads approximately in late 1994 or early 1995 as an expansion of the pre-existing Shuttle Program PSRP. This paper briefly describes the fundamental Shuttle safety process and the establishment of the safety requirements for payloads intending to use the Space Transportation System and International Space Station (ISS). The paper will also offer some historical statistics about the experiments that completed the payload safety process for Shuttle and ISS. The paper 1 then presents the background of ISS agreements and international treaties that had to be taken into account when establishing the ESA PSRP. The detailed franchising model will be expounded upon, followed by an outline of the cooperation charter approved by the NASA Associate Administrator, Office of Space Flight, and ESA Director of Manned Spaceflight and Microgravity. The resulting ESA PSRP implementation and its success statistics to date will then be addressed. Additionally the paper presents the ongoing developments with the Japan Aerospace Exploration Agency. The discussion will conclude with ideas for future developments, such to achieve a fully integrated international system of payload safety panels for ISS.

Quo Vadis: Aberrations in the Development of Dendritic Cells in the Autoimmunity-Prone Non-Obese Diabetic Mouse

NARCIS (Netherlands)

T. Nikolic (Tatjana)

2004-01-01

textabstractImmune system protects us from harmful microbes and tumor development. At the same time, the immune system makes sure that the unnecessary immune reaction against harmless foreign substances (known as antigens) or self-originating structures (self-antigens) either does not occur or is

TRU waste certification and TRUPACT-II payload verification

International Nuclear Information System (INIS)

Hunter, E.K.; Johnson, J.E.

1990-01-01

The Waste Isolation Pilot Plant (WIPP) established a policy (subsequently confirmed and required by DOE Order 5820.2A, Radioactive Waste Management, September 1988) that requires each waste shipper to verify that all waste shipments meet the requirements of the Waste Acceptance Criteria (WAC) prior to being shipped. This verification provides assurance that transuranic (TRU) wastes meet the criteria while still retained in a facility where discrepancies can be immediately corrected. In this manner, problems that would arise if WAC violations were discovered at the receiver, where corrective facilities are not available, are avoided. Each Department of Energy (DOE) TRU waste facility planning to ship waste to the Waste Isolation Pilot Plant (WIPP) is required to develop and implement a specific program including Quality Assurance (QA) provisions to verify that waste is in full compliance with WIPP's WAC. This program is audited by a composite DOE and contractor audit team prior to granting the facility permission to certify waste. During interaction with the Nuclear Regulatory Commission (NRC) on payload verification for shipping in TRUPACT-II, a similar system was established by DOE. The TRUPACT-II Safety Analysis Report (SAR) contains the technical requirements and physical and chemical limits that payloads must meet (like the WAC). All shippers must plan and implement a payload control program including independent QA provisions. A similar composite audit team will conduct preshipment audits, frequent subsequent audits, and operations inspections to verify that all TRU waste shipments in TRUPACT-II meet the requirements of the Certificate of Compliance (C of C) issued by the NRC which invokes the SAR requirements. 1 fig

The Living With a Star Space Environment Testbed Payload

Science.gov (United States)

Xapsos, Mike

2015-01-01

This presentation outlines a brief description of the Living With a Star (LWS) Program missions and detailed information about the Space Environment Testbed (SET) payload consisting of a space weather monitor and carrier containing 4 board experiments.

[Rationalization and rationing at the bedside. A normative and empirical status quo analysis].

Science.gov (United States)

Strech, D

2014-02-01

The topic of bedside rationing is increasingly discussed in Germany. Further need for clarification exists for the question how bedside rationing (e.g., in the area of overcare) can be justified despite coexistent inefficiencies. This paper outlines and analyses the relationship of waste avoidance and rationing from an ethical perspective. Empirical findings regarding the status quo of bedside rationing and rationalization are presented. These normative and empirical explorations will then be further specified regarding opportunities for future physician-driven activities to tackle overuse. The self-government partners in Germany should communicate more explicitly within their communities and to the public how and with which benchmarks they aim to reduce inefficient health care (overuse) in an appropriate manner. Physician-driven activities such as the "Choosing Wisely®" initiative in the USA could provide a first step to raise the awareness for overuse among physicians as well as in the public.

Quality assurance guidance for TRUPACT-II [Transuranic Package Transporter-II] payload control

International Nuclear Information System (INIS)

1989-10-01

The Transuranic Package Transporter-II (TRUPACT-II) Safety Analysis Report for Packaging (SARP) approved by the Nuclear Regulatory Commission (NRC), discusses authorized methods for payload control in Appendix 1.3.7 and the Quality Assurance (QA) requirements in Section 9.3. Subsection 9.3.2.1 covers maintenance and use of the TRUPACT-II and the specific QA requirements are given in DOE/WIPP 89-012. Subsection 9.3.2.2 covers payload compliance, for which this document was written. 6 refs

Review of concentrating solar thermal power industry in China: Status quo, problems, trend and countermeasures

Science.gov (United States)

Zou, Jiajun

2018-01-01

Concentrating solar thermal power (CSP) industry is a strategic emerging industry in China. Its further development is of great significance for promoting the energy revolution, achieving energy saving and emission reduction. In this paper, China’s CSP industry is systematically analysed. First of all, the status quo is elaborated from the perspectives of relevant policies and regulations, market and generation technology development. Secondly, the problems and the underlying reasons of China’s CSP industry are deeply studied. On this basis, the future trends of CSP are expounded on the three levels of policy, market and power generation technology. Finally, a series of feasible countermeasures are put forward, designed to promote the development of CSP industry and the transformation of energy structure.

Determining the Status Quo of Infection Prevention and Control Standards in the Hospitals of Iran: A Case Study in 23 Hospitals

OpenAIRE

Shojaee, Jalil; Moosazadeh, Mahmood

2014-01-01

Background: Applying Prevention and Control of Infection (PCI) standards in hospitals reduces probable risks to patients, staff and visitors; it also increases efficiency, and ultimately improves productivity of hospitals. Objective: The current study aimed to determine the status quo of international standards of PCI in hospitals located in the north of Iran. Materials and Methods: This cross-sectional study was conducted in 23 hospitals. Data collection tool was a questionnaire with confirm...

STS-95 Payload Specialist Glenn participates in a media briefing before returning to JSC

Science.gov (United States)

1998-01-01

STS-95 Payload Specialist John H. Glenn Jr., a senator from Ohio and one of the original seven Project Mercury astronauts, participates in a media briefing at the Kennedy Space Center Press Site Auditorium before returning to the Johnson Space Center in Houston, Texas. The STS-95 mission ended with landing at Kennedy Space Center's Shuttle Landing Facility at 12:04 p.m. EST on Nov. 7. Also participating in the briefing were the other STS-95 crew members: Mission Commander Curtis L. Brown Jr.; Pilot Steven W. Lindsey; Mission Specialist and Payload Commander Stephen K. Robinson; Mission Specialist Scott E. Parazynski; Mission Specialist Pedro Duque, with the European Space Agency (ESA); and Payload Specialist Chiaki Mukai, with the National Space Development Agency of Japan (NASDA). The mission included research payloads such as the Spartan-201 solar-observing deployable spacecraft, the Hubble Space Telescope Orbital Systems Test Platform, the International Extreme Ultraviolet Hitchhiker, as well as a SPACEHAB single module with experiments on space flight and the aging process.

Thermal Control Subsystem Design for the Avionics of a Space Station Payload

Science.gov (United States)

Moran, Matthew E.

1996-01-01

A case study of the thermal control subsystem development for a space based payload is presented from the concept stage through preliminary design. This payload, the Space Acceleration Measurement System 2 (SAMS-2), will measure the acceleration environment at select locations within the International Space Station. Its thermal control subsystem must maintain component temperatures within an acceptable range over a 10 year life span, while restricting accessible surfaces to touch temperature limits and insuring fail safe conditions in the event of loss of cooling. In addition to these primary design objectives, system level requirements and constraints are imposed on the payload, many of which are driven by multidisciplinary issues. Blending these issues into the overall system design required concurrent design sessions with the project team, iterative conceptual design layouts, thermal analysis and modeling, and hardware testing. Multiple tradeoff studies were also performed to investigate the many options which surfaced during the development cycle.

Astronaut training in view of the future: A Columbus payload instructor perspective

Science.gov (United States)

Aguzzi, Manuela; Bosca, Riccardo; Müllerschkowski, Uwe

2010-02-01

In early 2008 the Columbus module was successfully attached to the ISS. Columbus is the main European contribution to the on-board scientific activity, and is the result of the interdisciplinary effort of European professionals involved from the concept to the utilisation of the laboratory. Astronauts from different Space Agencies have been trained to operate the scientific payloads aboard Columbus, in order to return fundamental data to the scientific community. The aim of this paper is to describe the current activity of the Columbus Payload Training Team (as part of the European Astronaut Centre of ESA) and from this experience derive lessons learned for the future training development, in view of long-term missions. The general structure of the training is described. The Columbus Payload Training Team activity is outlined and the process of the lesson development (Instructional System Design) is briefly described. Finally the features of the training process that can become critical in future scenario are highlighted.

Exploring Mars: The Ares Payload Service (APS)

Science.gov (United States)

Bowen, Justin; Lusignan, Bruce

1999-08-01

In last year's Mars Society convention we introduced the results of five years of studies of space launch capability for the second millennium. We concluded that Single Stage to Orbit (SSTO) vehicles such as the Delta Clipper X33, and X34 cannot make it to orbit from the Earth's surface. Whether taking off vertically or horizontally or landing vertically or horizontally, the rocket equations, the performance of available fuels, and the realities of the weight and strength of materials leave no margin for payload. The promised savings from SSTO systems are illusory. However, a configuration that is able to deliver useful payload to orbit is the Single step to Orbit, SsTO, a rocket plane that is released fully fueled, from 35,000 to 40,000 feet altitude. Three approaches have been proposed. The Hot'l and Molnya Corporation designs carry the fueled rocket plane to altitude on the back of a carrier aircraft. In this design the carrier aircraft is Russia's Antonov 225 the world's largest cargo plane. The rocket plane is a modified version of the Buran, Russia's own space shuttle. Another configuration is Kelly Aviation's concept in which the fully fueled rocket plane is towed to altitude by the cargo plane and then released. A third approach is based on the early "X" planes, which were dropped from the belly of the carrier plane. While the rocket equations indicate that these three concepts can deliver useful payloads, the Stanford review found significant advantages to the approach of Pioneer Rocket, in which the rocket plane flies up to the carrier plane with conventional jet engines, docks, and then loads on the oxidizer for the flight to orbit. This architecture has more reasonable abort modes in case of system failure in either aircraft and can deliver a larger final payload to orbit for a given sized carrier. The Stanford recommendation is that the carrier aircraft be the Antonov 225. A design based on this was presented in a report last year. Refinements to the

Exploring Mars: the Ares Payload Service (APS)

Science.gov (United States)

Bowen, Justin; Lusignan, Bruce

1999-01-01

In last year's Mars Society convention we introduced the results of five years of studies of space launch capability for the second millennium. We concluded that Single Stage to Orbit (SSTO) vehicles such as the Delta Clipper X33, and X34 cannot make it to orbit from the Earth's surface. Whether taking off vertically or horizontally or landing vertically or horizontally, the rocket equations, the performance of available fuels, and the realities of the weight and strength of materials leave no margin for payload. The promised savings from SSTO systems are illusory. However, a configuration that is able to deliver useful payload to orbit is the Single step to Orbit, SsTO, a rocket plane that is released fully fueled, from 35,000 to 40,000 feet altitude. Three approaches have been proposed. The Hot'l and Molnya Corporation designs carry the fueled rocket plane to altitude on the back of a carrier aircraft. In this design the carrier aircraft is Russia's Antonov 225 the world's largest cargo plane. The rocket plane is a modified version of the Buran, Russia's own space shuttle. Another configuration is Kelly Aviation's concept in which the fully fueled rocket plane is towed to altitude by the cargo plane and then released. A third approach is based on the early "X" planes, which were dropped from the belly of the carrier plane. While the rocket equations indicate that these three concepts can deliver useful payloads, the Stanford review found significant advantages to the approach of Pioneer Rocket, in which the rocket plane flies up to the carrier plane with conventional jet engines, docks, and then loads on the oxidizer for the flight to orbit. This architecture has more reasonable abort modes in case of system failure in either aircraft and can deliver a larger final payload to orbit for a given sized carrier. The Stanford recommendation is that the carrier aircraft be the Antonov 225. A design based on this was presented in a report last year. Refinements to the

Measurements on an autonomous wireless payload at 635 km distance using a sensitive radio telescope

NARCIS (Netherlands)

Bentum, Marinus Jan; Leijtens, Johan; Verhoeven, Chris; van der Marel, Hans

2011-01-01

The Delfi-C3 spacecraft carries the first autonomous wireless payload in space. This payload is a wireless sun sensor developed by TNO in the Netherlands. The data captured by the sensor is wirelessly transported to the central computer system inside the spacecraft. Since no additional power supply

Integrated payload and mission planning, phase 3. Volume 3: Ground real-time mission operations

Science.gov (United States)

White, W. J.

1977-01-01

The payloads tentatively planned to fly on the first two Spacelab missions were analyzed to examine the cost relationships of providing mission operations support from onboard vs the ground-based Payload Operations Control Center (POCC). The quantitative results indicate that use of a POCC, with data processing capability, to support real-time mission operations is the most cost effective case.

AltiKa: a Ka-band Altimetry Payload and System for Operational Altimetry during the GMES Period

Directory of Open Access Journals (Sweden)

Jacques Verron

2006-03-01

Full Text Available This paper describes the Ka-band altimetry payload and system that has beenstudied for several years by CNES, ALCATEL SPACE and some science laboratories.Altimetry is one of the major elements of the ocean observing system to be madesustainable through the GEOSS (Global Earth Observation System of Systems and GMES(Global Monitoring of the Environment and Security programs. A short review of somemission objectives to be fulfilled in terms of mesoscale oceanography in the frame of theGEOSS and GMES programs is performed. To answer the corresponding requirements, theapproach consisting in a constellation of nadir altimeter is discussed. A coupled Ka-bandaltimeter-radiometer payload is then described; technical items are detailed to explain howthis payload shall meet the science and operational requirements, and expectedperformances are displayed. The current status of the payload development and flightperspectives are given.

Android Malware Clustering through Malicious Payload Mining

OpenAIRE

Li, Yuping; Jang, Jiyong; Hu, Xin; Ou, Xinming

2017-01-01

Clustering has been well studied for desktop malware analysis as an effective triage method. Conventional similarity-based clustering techniques, however, cannot be immediately applied to Android malware analysis due to the excessive use of third-party libraries in Android application development and the widespread use of repackaging in malware development. We design and implement an Android malware clustering system through iterative mining of malicious payload and checking whether malware s...

Plastic Melt Waste Compactor Flight Demonstrator Payload (PFDP), Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The PMWC Flight Demonstrator Payload is a trash dewatering and volume reduction system that uses heat melt compaction to remove nearly 100% of water from trash while...

View of OMS burn from the payload bay

Science.gov (United States)

1982-01-01

View of Orbital Maneuvering System (OMS) burn from the payload bay. The closed cradles which held the communication satellites Columbia deployed are visible in the center of the frame. Parts of the spacecraft's wings can be seen on both the port and starboard sides can be seen. The vertical stabilizer is flanked by the twin OMS pods.

Trans Atlantic Infrasound Payload (TAIP) Operation Plan.

Energy Technology Data Exchange (ETDEWEB)

Bowman, Daniel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lees, Jonathan M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2018-01-01

The Carolina Infrasound package, added as a piggyback to the 2016 ULDB ight, recorded unique acoustic signals such as the ocean microbarom and a large meteor. These data both yielded unique insights into the acoustic energy transfer from the lower to the upper atmosphere as well as highlighted the vast array of signals whose origins remain unknown. Now, the opportunity to y a payload across the north Atlantic offers an opportunity to sample one of the most active ocean microbarom sources on Earth. Improvements in payload capabilities should result in characterization of the higher frequency range of the stratospheric infrasound spectrum as well. Finally, numerous large mining and munitions disposal explosions in the region may provide \\ground truth" events for assessing the detection capability of infrasound microphones in the stratosphere. The flight will include three different types of infrasound sensors. One type is a pair of polarity reversed InfraBSU microphones (standard for high altitude flights since 2016), another is a highly sensitive Chaparral 60 modified for a very low corner period, and the final sensor is a lightweight, low power Gem infrasound package. By evaluating these configurations against each other on the same flight, we will be able to optimize future campaigns with different sensitivity and mass constraints.

Resource planning and scheduling of payload for satellite with particle swarm optimization

Science.gov (United States)

Li, Jian; Wang, Cheng

2007-11-01

The resource planning and scheduling technology of payload is a key technology to realize an automated control for earth observing satellite with limited resources on satellite, which is implemented to arrange the works states of various payloads to carry out missions by optimizing the scheme of the resources. The scheduling task is a difficult constraint optimization problem with various and mutative requests and constraints. Based on the analysis of the satellite's functions and the payload's resource constraints, a proactive planning and scheduling strategy based on the availability of consumable and replenishable resources in time-order is introduced along with dividing the planning and scheduling period to several pieces. A particle swarm optimization algorithm is proposed to address the problem with an adaptive mutation operator selection, where the swarm is divided into groups with different probabilities to employ various mutation operators viz., differential evolution, Gaussian and random mutation operators. The probabilities are adjusted adaptively by comparing the effectiveness of the groups to select a proper operator. The simulation results have shown the feasibility and effectiveness of the method.

Re-Engineering the ISS Payload Operations Control Center During Increased Utilization and Critical Onboard Events

Science.gov (United States)

Dudley, Stephanie R. B.; Marsh, Angela L.

2014-01-01

With an increase in utilization and hours of payload operations being executed onboard the International Space Station (ISS), upgrading the NASA Marshall Space Flight Center (MSFC) Huntsville Operations Support Center (HOSC) ISS Payload Control Area (PCA) was essential to gaining efficiencies and assurance of current and future payload health and science return. PCA houses the Payload Operations Integration Center (POIC) responsible for the execution of all NASA payloads onboard the ISS. POIC Flight Controllers are responsible for the operation of voice, stowage, command, telemetry, video, power, thermal, and environmental control in support of ISS science experiments. The methodologies and execution of the PCA refurbishment were planned and performed within a four-month period in order to assure uninterrupted operation of ISS payloads and minimal impacts to payload operations teams. To vacate the PCA, three additional HOSC control rooms were reconfigured to handle ISS real-time operations, Backup Control Center (BCC) to Mission Control in Houston, simulations, and testing functions. This involved coordination and cooperation from teams of ISS operations controllers, multiple engineering and design disciplines, management, and construction companies performing an array of activities simultaneously and in sync delivering a final product with no issues that impacted the schedule. For each console operator discipline, studies of Information Technology (IT) tools and equipment layouts, ergonomics, and lines of sight were performed. Infusing some of the latest IT into the project was an essential goal in ensuring future growth and success of the ISS payload science returns. Engineering evaluations led to a state of the art Video Wall implementation and more efficient ethernet cabling distribution providing the latest products and the best solution for the POIC. These engineering innovations led to cost savings for the project. Constraints involved in the management of

The American Satellite Company (ASC) satellite deployed from payload bay

Science.gov (United States)

1985-01-01

The American Satellite Company (ASC) communications satellite is deployed from the payload bay of the Shuttle Discovery. A portion of the cloudy surface of the earth can be seen to the left of the frame.

El acuerdo de comercio preferencial entre la Unión Europea, Colombia y Perú. Contenido y cambios al Status quo

OpenAIRE

Dieter Wolfram

2011-01-01

El acuerdo de comercio preferencial negociado y suscrito entre la Unión Europea, Colombia y Perú en mayo de 2010 aspira a profundizar y vivificar las relaciones comerciales entre las partes sin causar conflictos con convenciones internacionales multilaterales como el GATT, el GATS, el ADPIC, y la Convención sobre la Biodiversidad. . Un análisis de los cambios jurídicos impulsados por el acuerdo muestra pocas modificaciones o cambios sustanciales del status quo. Para los comerciantes andinos, ...

Coil-free active stabilisation of extended payloads with optical inertial sensors

Science.gov (United States)

Watchi, J.; Ding, B.; Tshilumba, D.; Artoos, K.; Collette, C.

2018-05-01

This paper presents a new active isolation strategy and system which is dedicated to extended payloads, and compatible with the particle accelerator environment. In comparison to the current isolation systems used in this environment, the system proposed does not contain any coil or elastomer, and the supporting frame is dedicated to isolating long payloads from seismic motion. The concept proposed has been tested numerically on 3 and 6 degrees of freedom (DOF) models, and validated experimentally on a 1-DOF scaled test set-up. An attenuation of 40 dB at 1 Hz has been reached with the stage built. The complete description of performance and a noise budgeting are included in this paper.

The “New Doctorate” in Austria: Progress toward a Professional Model or Status Quo?

Directory of Open Access Journals (Sweden)

Hans Pechar

2012-01-01

Full Text Available Until recently, both policy direction and public awareness of the Bologna Process has been focused almost unilaterally on the introduction of the Bachelor’s degree to European universities. This is understandable, as for most European countries, the Bachelor is a new academic degree. However, commencing with the Berlin Ministerial Conference (Realising the European Higher Education Area, 2003, reform of doctoral studies has been highlighted as a second equal pillar in the Bologna reform process. In this paper, we begin by providing an overview of the general policy background and the rationales that underlie the attempts to restructure doctoral studies in Europe. Next, we focus on the specific situation in Austria, where peculiarities of the status quo collide with uniquely Austrian approaches to reforming doctoral education. Finally, through two case studies, we examine initial attempts – and related challenges – to implement the “New Doctorate” in Austria.

High-Rate Communications Outage Recorder Operations for Optimal Payload and Science Telemetry Management Onboard the International Space Station

Science.gov (United States)

Shell, Michael T.; McElyea, Richard M. (Technical Monitor)

2002-01-01

All International Space Station (ISS) Ku-band telemetry transmits through the High-Rate Communications Outage Recorder (HCOR). The HCOR provides the recording and playback capability for all payload, science, and International Partner data streams transmitting through NASA's Ku-band antenna system. The HCOR is a solid-state memory recorder that provides recording capability to record all eight ISS high-rate data during ISS Loss-of-Signal periods. NASA payloads in the Destiny module are prime users of the HCOR; however, NASDA and ESA will also utilize the HCOR for data capture and playback of their high data rate links from the Kibo and Columbus modules. Marshall Space Flight Center's Payload Operations Integration Center manages the HCOR for nominal functions, including system configurations and playback operations. The purpose of this paper is to present the nominal operations plan for the HCOR and the plans for handling contingency operations affecting payload operations. In addition, the paper will address HCOR operation limitations and the expected effects on payload operations. The HCOR is manifested for ISS delivery on flight 9A with the HCOR backup manifested on flight 11A. The HCOR replaces the Medium-Rate Communications Outage Recorder (MCOR), which has supported payloads since flight 5A.1.

Design and analysis of truck body for increasing the payload capacity

Science.gov (United States)

Vamshi Krishna, K.; Yugandhar Reddy, K.; Venugopal, K.; Ravi, K.

2017-11-01

Truck industry is a major source of transportation in India. With an average truck travelling about 300 kilometers per day [1], every kilogram of truck weight is of concern to the industry in order to get the best out of the truck. The main objective of this project is to increase the payload capacity of automotive truck body. Every kilogram of increased vehicle weight will decrease the vehicle payload capacity in turn increasing the manufacturing cost and reducing the fuel economy by increase the fuel consumption. With the intension of weight reduction, standard truck body has been designed and analyzed in ANSYS software. C-cross section beams were used instead of conventional rectangular box sections to reduce the weight of the body. Light-weight Aluminum alloy Al 6061 T6 is used to increase the payload capacity. The strength of the Truck platform is monitored in terms of deformation and stress concentration. These parameters will be obtained in structural analysis test condition environment. For reducing the stress concentration the concept of beams of uniform strength is used. Accordingly necessary modifications are done so that the optimized model has a better stress distribution and much lesser weight compared to the conventional model. The results obtained by analyzing the modified model are compared with the standard model.

Fiber optical sensor system for shape and haptics for flexible instruments in minimally invasive surgery: overview and status quo

Science.gov (United States)

Ledermann, Christoph; Pauer, Hendrikje; Woern, Heinz

2014-05-01

In minimally invasive surgery, exible mechatronic instruments promise to improve the overall performance of surgical interventions. However, those instruments require highly developed sensors in order to provide haptic feedback to the surgeon or to enable (semi-)autonomous tasks. Precisely, haptic sensors and a shape sensor are required. In this paper, we present our ber optical sensor system of Fiber Bragg Gratings, which consists of a shape sensor, a kinesthetic sensor and a tactile sensor. The status quo of each of the three sensors is described, as well as the concept to integrate them into one ber optical sensor system.

Advanced transportation system study: Manned launch vehicle concepts for two way transportation system payloads to LEO

Science.gov (United States)

Duffy, James B.

1993-01-01

The purpose of the Advanced Transportation System Study (ATSS) task area 1 study effort is to examine manned launch vehicle booster concepts and two-way cargo transfer and return vehicle concepts to determine which of the many proposed concepts best meets NASA's needs for two-way transportation to low earth orbit. The study identified specific configurations of the normally unmanned, expendable launch vehicles (such as the National Launch System family) necessary to fly manned payloads. These launch vehicle configurations were then analyzed to determine the integrated booster/spacecraft performance, operations, reliability, and cost characteristics for the payload delivery and return mission. Design impacts to the expendable launch vehicles which would be required to perform the manned payload delivery mission were also identified. These impacts included the implications of applying NASA's man-rating requirements, as well as any mission or payload unique impacts. The booster concepts evaluated included the National Launch System (NLS) family of expendable vehicles and several variations of the NLS reference configurations to deliver larger manned payload concepts (such as the crew logistics vehicle (CLV) proposed by NASA JSC). Advanced, clean sheet concepts such as an F-1A engine derived liquid rocket booster (LRB), the single stage to orbit rocket, and a NASP-derived aerospace plane were also included in the study effort. Existing expendable launch vehicles such as the Titan 4, Ariane 5, Energia, and Proton were also examined. Although several manned payload concepts were considered in the analyses, the reference manned payload was the NASA Langley Research Center's HL-20 version of the personnel launch system (PLS). A scaled up version of the PLS for combined crew/cargo delivery capability, the HL-42 configuration, was also included in the analyses of cargo transfer and return vehicle (CTRV) booster concepts. In addition to strictly manned payloads, two-way cargo

The Athena Mars Rover Science Payload

Science.gov (United States)

Squyes, S. W.; Arvidson, R.; Bell, J. F., III; Carr, M.; Christensen, P.; DesMarais, D.; Economou, T.; Gorevan, S.; Klingelhoefer, G.; Haskin, L.

1998-01-01

The Mars Surveyor missions that will be launched in April of 2001 will include a highly capable rover that is a successor to the Mars Pathfinder mission's Sojourner rover. The design goals for this rover are a total traverse distance of at least 10 km and a total lifetime of at least one Earth year. The rover's job will be to explore a site in Mars' ancient terrain, searching for materials likely to preserve a record of ancient martian water, climate, and possibly biology. The rover will collect rock and soil samples, and will store them for return to Earth by a subsequent Mars Surveyor mission in 2005. The Athena Mars rover science payload is the suite of scientific instruments and sample collection tools that will be used to perform this job. The specific science objectives that NASA has identified for the '01 rover payload are to: (1) Provide color stereo imaging of martian surface environments, and remotely-sensed point discrimination of mineralogical composition. (2) Determine the elemental and mineralogical composition of martian surface materials. (3) Determine the fine-scale textural properties of these materials. (4) Collect and store samples. The Athena payload has been designed to meet these objectives. The focus of the design is on field operations: making sure the rover can locate, characterize, and collect scientifically important samples in a dusty, dirty, real-world environment. The topography, morphology, and mineralogy of the scene around the rover will be revealed by Pancam/Mini-TES, an integrated imager and IR spectrometer. Pancam views the surface around the rover in stereo and color. It uses two high-resolution cameras that are identical in most respects to the rover's navigation cameras. The detectors are low-power, low-mass active pixel sensors with on-chip 12-bit analog-to-digital conversion. Filters provide 8-12 color spectral bandpasses over the spectral region from 0.4 to 1.1 micron Narrow-angle optics provide an angular resolution of 0

Low Cost Variable Conductance Heat Pipe for Balloon Payload, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — While continuously increasing in complexity, the payloads of terrestrial high altitude balloons need a thermal management system to reject their waste heat and to...

Solar X-ray Spectrometer (SOXS) Mission – Low Energy Payload ...

Indian Academy of Sciences (India)

Solar X-ray Spectrometer (SOXS)' mission, which was launched onboard GSAT-2 Indian spacecraft on 08 May 2003 by GSLV-D2 rocket to study the solar flares. The SOXS Low Energy Detector (SLD) payload was designed, developed and ...

STS-47 Payload Specialist Mohri tosses an apple during SLJ demonstration

Science.gov (United States)

1992-01-01

STS-47 Payload Specialist Mamoru Mohri tosses an apple in the weightless environment of the Spacelab Japan (SLJ) science module aboard the Earth-orbitng Endeavour, Orbiter Vehicle (OV) 105. Mohri was handling the space end of a space-to-Earth youth Conference with students in his home country (Japan) in which he gave a brief demonstration on the specifics of his mission as well as general information on space travel and space physics. Mohri conducts his demonstration in front of the NASDA Material Sciences Rack 10. In the background is the SLJ end cone with Detailed Test Objective (DTO), Foot restraint evaluation, base plate, a banner from Auburn University, and portraits of the backup payload specialists. Mohri represents Japan's National Space Development Agency (NASDA).

Simultaneous observations of E- and B-ULF waves aboard a sounding rocket payload

International Nuclear Information System (INIS)

Kloecker, N.; Luehr, H.; Grabowski, R.

1980-01-01

Magnetic and electric field variations in the frequency range of 0.5 to 4 Hz were made on a payload flown within the IMS sounding rocket campaign 'Substormphenomena'. The payload was launched into an auroral break-up. The waves show amplitudes up to 100 nT in B and 100 mV/m in E. Mutual correlation of B and E as well as correlation with electron precipitation are observed. The energy flux of the waves and the particles are equally directed and of the same order of magnitude. (Auth.)

Highly reusable space transportation: Approaches for reducing ETO launch costs to $100 - $200 per pound of payload

Science.gov (United States)

Olds, John R.

1995-01-01

The Commercial Space Transportation Study (CSTS) suggests that considerable market expansion in earth-to-orbit transportation would take place if current launch prices could be reduced to around $400 per pound of payload. If these low prices can be achieved, annual payload delivered to low earth orbit (LEO) is predicted to reach 6.7 million pounds. The primary market growth will occur in communications, government missions, and civil transportation. By establishing a cost target of $100-$200 per pound of payload for a new launch system, the Highly Reusable Space Transportation (HRST) program has clearly set its sights on removing the current restriction on market growth imposed by today's high launch costs. In particular, achieving the goal of $100-$200 per pound of payload will require significant coordinated efforts in (1) marketing strategy development, (2) business planning, (3) system operational strategy, (4) vehicle technical design, and (5) vehicle maintenance strategy.

A Robust Oil-in-Oil Emulsion for the Nonaqueous Encapsulation of Hydrophilic Payloads.

Science.gov (United States)

Lu, Xiaocun; Katz, Joshua S; Schmitt, Adam K; Moore, Jeffrey S

2018-03-14

Compartmentalized structures widely exist in cellular systems (organelles) and perform essential functions in smart composite materials (microcapsules, vasculatures, and micelles) to provide localized functionality and enhance materials' compatibility. An entirely water-free compartmentalization system is of significant value to the materials community as nonaqueous conditions are critical to packaging microcapsules with water-free hydrophilic payloads while avoiding energy-intensive drying steps. Few nonaqueous encapsulation techniques are known, especially when considering just the scalable processes that operate in batch mode. Herein, we report a robust oil-in-oil Pickering emulsion system that is compatible with nonaqueous interfacial reactions as required for encapsulation of hydrophilic payloads. A major conceptual advance of this work is the notion of the partitioning inhibitor-a chemical agent that greatly reduces the payload's distribution between the emulsion's two phases, thus providing appropriate conditions for emulsion-templated interfacial polymerization. As a specific example, an immiscible hydrocarbon-amine pair of liquids is emulsified by the incorporation of guanidinium chloride (GuHCl) as a partitioning inhibitor into the dispersed phase. Polyisobutylene (PIB) is added into the continuous phase as a viscosity modifier for suitable modification of interfacial polymerization kinetics. The combination of GuHCl and PIB is necessary to yield a robust emulsion with stable morphology for 3 weeks. Shell wall formation was accomplished by interfacial polymerization of isocyanates delivered through the continuous phase and polyamines from the droplet core. Diethylenetriamine (DETA)-loaded microcapsules were isolated in good yield, exhibiting high thermal and chemical stabilities with extended shelf-lives even when dispersed into a reactive epoxy resin. The polyamine phase is compatible with a variety of basic and hydrophilic actives, suggesting that this

Zero Emission Buildings in Korea—History, Status Quo, and Future Prospects

Directory of Open Access Journals (Sweden)

Thorsten Schuetze

2015-03-01

Full Text Available This paper discusses the history, status quo, and future prospects of Zero Emission Buildings (ZEBs in the Republic of Korea. The advantages of, and requirements for ZEBs are described, concerning the factors of energy, water, nutrients, and biomass. ZEBs are characterized by net zero energy consumption through the minimization of the energy demand, as well as the onsite production and use of renewable energy. The direct water footprint is reduced by up to 100% through on-site water supply and wastewater management according to the principles of Sustainable Sanitation. The fresh water demand is reduced by using water saving technologies and by recycling of wastewater. Rainwater harvesting, utilization, and infiltration facilitates for onsite drinking water production. Nutrients and biomass from sanitation systems are recycled for local soil application. While traditional Korean buildings can be generally regarded as ZEBs, traditional know-how has been overlooked in the process of modernization and implementation of centralized infrastructure systems in the 20th century. However, the growing interest in sustainability issues in Korea since the beginning of the 21st century is reflected in a growing number of research and development activities, including the design, construction, and operation of ZEBs. The widespread implementation of ZEBs would significantly contribute to sustainable development in the Republic of Korea.

The Status Quo and Developing Trend Analysis of Global Carbon Finance

Institute of Scientific and Technical Information of China (English)

Liu Qian; Wang Yao

2011-01-01

This paper gives a systematic view of the new trends of global carbon finance innovation under the challenge of global climate change and in the process of transition to achieve economic growth from ＂high carbon＂ to ＇low carbon＇, covering the following aspects： the structure, status quo and developing trend of global carbon market. The paper discusses the innovation in financial organization and service systems and governments＇ overall guidance and policy support, and draws the conclusion that the world is undergoing massive changes with governments actively responding to carbon finance to embrace the tremendous opportunities for clean energy and climate change in financial industry. To seize the opportunity, a complete and overall carbon finance system of China should be put in the top of the agenda. Given the current tasks of energy conservation and pollution reduction and the growing demand for capital input, China needs to construct an clear of policy guidance, a diversified financia service system, and a multi-approach carbon finance system to intensify and widen the participation of financial industry, to expand financing channels for sustainable economy and spread risks, and finally, work out an inexpensive solution to the realization of China＇s low carbon target.

Plastic surgery: quo vadis? Current trends and future projections of aesthetic plastic surgical procedures in the United States.

Science.gov (United States)

Broer, P Niclas; Levine, Steven M; Juran, Sabrina

2014-03-01

The objective of this article was to evaluate past and current trends regarding aesthetic operations in the United States and to project future changes regarding such procedures. Cosmetic surgery statistics from the American Society for Aesthetic Plastic Surgery from 1997 to 2012 were analyzed by sex, age, and ethnic group. Then, using population projections from the U.S. Census Bureau based on the 2010 census, two projection scenarios of the expected number of aesthetic plastic surgery procedures were generated. The scenarios included the presumed occurrence and nonoccurrence of a recession like that which occurred in 2007. Aesthetic procedures are expected to grow from 1,688,694 in 2012 to 3,847,929 by 2030, representing an average annual growth rate of 7.1 percent. Should another recession of similar degree to the one in 2007 occur, procedures would increase to only 2,086,994, displaying an average annual growth percentage rate of 1.3 percent. Because the age distribution of the patient population will change, preferences for specific procedures according to age influence-and thus are reflected in-future demand for those procedures. Furthermore, the ethnic profile of patients will change significantly, with 32 percent of all procedures being performed on patients other than Caucasians by 2030. Demand for aesthetic plastic surgical procedures is expected to continue to grow, while depending on the economic performance at the macro level and changing demographic dynamics of the U.S. population. Considering all investigated factors and trends among all patients, the most commonly requested procedures by 2030 are likely to be (1) breast augmentations, (2) lipoplasties, and (3) blepharoplasties.

The future of discovery chemistry: quo vadis? Academic to industrial--the maturation of medicinal chemistry to chemical biology.

Science.gov (United States)

Hoffmann, Torsten; Bishop, Cheryl

2010-04-01

At Roche, we set out to think about the future role of medicinal chemistry in drug discovery in a project involving both Roche internal stakeholders and external experts in drug discovery chemistry. To derive a coherent strategy, selected scientists were asked to take extreme positions and to derive two orthogonal strategic options: chemistry as the traditional mainstream science and chemistry as the central entrepreneurial science. We believe today's role of medicinal chemistry in industry has remained too narrow. To provide the innovation that industry requires, medicinal chemistry must play its part and diversify at pace with our increasing understanding of chemical biology and network pharmacology. 2010 Elsevier Ltd. All rights reserved.

DIFFUSIVE-Magnetoresistance(DMR) Proton(PMR)/Hydrogen-ion WATER: PRE-``Fert''/``Grunberg'' GMR[and CMR]: Quo-Vadis ``Honesty''???: PLAGIARISM!!!

Science.gov (United States)

Fart, Albart; Gruntbug, Peter; Siegel, Edward

2011-03-01

Proton/Hydrogen-ion Diffusive-Magnetoresistance(DMR) of Siegel[APS March-Mtgs.(70s)] based upon Siegel[Int'l. Conf. Mag.-Alloys and Oxides("ICMAO"), The Technion(77); J. Mag. Mag. Mtls. 7, 312(78)] FIRST experimental-discovery of GMR and FIRST theoretical prediction of CMR[ibid. 7, 338 (78)], facilitates NEW water production in global-warming exacerbated dry arid/semi-arid regions: Only HYDROGEN is/can be "FLYING-WATER"!!! (aka "chemical-rain-in-pipelines"). EMET/TRUTH-in-the-``SEANCES'', would-be "Sciences": C. Perelman-Corredoira [Against the Tide(07)] featuring Martin-Bradshaw ["Healing the SHAME That BINDS You"(80s)] systemic sociological-dysfunctionality(S-D), and Grigory Perelman's HEROIC ETHICS (refusal of both pure-maths Poincare-conjecture proof 2007 Fields-medal and 2010 Clay-Institute so-called/media-hyped/P.Red/spin-doctored millennium-prize million-dollar would-be award, militates as well in the current "SEANCE" of physics/maths politics/media-hype/P.R /spin-doctoring VS. Siegel FIRST experimental GMR a never-acknowledged full decade PRE-"Fert"(88) /"Grunberg(89)" ``Phales-GroPE''/Thompson-CSF/ KFZ-JEWlich 2007 physics Wolf/Japan/Nobel-prizes!!!

Optical tools and techniques for aligning solar payloads with the SPARCS control system. [Solar Pointing Aerobee Rocket Control System

Science.gov (United States)

Thomas, N. L.; Chisel, D. M.

1976-01-01

The success of a rocket-borne experiment depends not only on the pointing of the attitude control system, but on the alignment of the attitude control system to the payload. To ensure proper alignment, special optical tools and alignment techniques are required. Those that were used in the SPARCS program are described and discussed herein. These tools include theodolites, autocollimators, a 38-cm diameter solar simulator, a high-performance 1-m heliostat to provide a stable solar source during the integration of the rocket payload, a portable 75-cm sun tracker for use at the launch site, and an innovation called the Solar Alignment Prism. Using the real sun as the primary reference under field conditions, the Solar Alignment Prism facilitates the coalignment of the attitude sun sensor with the payload. The alignment techniques were developed to ensure the precise alignment of the solar payloads to the SPARCS attitude sensors during payload integration and to verify the required alignment under field conditions just prior to launch.

Insect juvenile hormone: from "status quo" to high society

Directory of Open Access Journals (Sweden)

K. Hartfelder

2000-02-01

Full Text Available Juvenile hormone (JH exerts pleiotropic functions during insect life cycles. The regulation of JH biosynthesis by neuropeptides and biogenic amines, as well as the transport of JH by specific binding proteins is now well understood. In contrast, comprehending its mode of action on target organs is still hampered by the difficulties in isolating specific receptors. In concert with ecdysteroids, JH orchestrates molting and metamorphosis, and its modulatory function in molting processes has gained it the attribute "status quo" hormone. Whereas the metamorphic role of JH appears to have been widely conserved, its role in reproduction has been subject to many modifications. In many species, JH stimulates vitellogenin synthesis and uptake. In mosquitoes, however, this function has been transferred to ecdysteroids, and JH primes the ecdysteroid response of developing follicles. As reproduction includes a variety of specific behaviors, including migration and diapause, JH has come to function as a master regulator in insect reproduction. The peak of pleiotropy was definitely reached in insects exhibiting facultative polymorphisms. In wing-dimorphic crickets, differential activation of JH esterase determines wing length. The evolution of sociality in Isoptera and Hymenoptera has also extensively relied on JH. In primitively social wasps and bumble bees, JH integrates dominance position with reproductive status. In highly social insects, such as the honey bee, JH has lost its gonadotropic role and now regulates division of labor in the worker caste. Its metamorphic role has been extensively explored in the morphological differentiation of queens and workers, and in the generation of worker polymorphism, such as observed in ants.

Life sciences payload definition and integration study, task C and D. Volume 1: Management summary

Science.gov (United States)

1973-01-01

The findings of a study to define the required payloads for conducting life science experiments in space are presented. The primary objectives of the study are: (1) identify research functions to be performed aboard life sciences spacecraft laboratories and necessary equipment, (2) develop conceptual designs of potential payloads, (3) integrate selected laboratory designs with space shuttle configurations, and (4) establish cost analysis of preliminary program planning.

Packet Payload Monitoring for Internet Worm Content Detection Using Deterministic Finite Automaton with Delayed Dictionary Compression

Directory of Open Access Journals (Sweden)

Divya Selvaraj

2014-01-01

Full Text Available Packet content scanning is one of the crucial threats to network security and network monitoring applications. In monitoring applications, payload of packets in a network is matched against the set of patterns in order to detect attacks like worms, viruses, and protocol definitions. During network transfer, incoming and outgoing packets are monitored in depth to inspect the packet payload. In this paper, the regular expressions that are basically string patterns are analyzed for packet payloads in detecting worms. Then the grouping scheme for regular expression matching is rewritten using Deterministic Finite Automaton (DFA. DFA achieves better processing speed during regular expression matching. DFA requires more memory space for each state. In order to reduce memory utilization, decompression technique is used. Delayed Dictionary Compression (DDC is applied for achieving better speeds in the communication links. DDC achieves decoding latency during compression of payload packets in the network. Experimental results show that the proposed approach provides better time consumption and memory utilization during detection of Internet worm attacks.

Probabilistic Sensitivity Analysis for Launch Vehicles with Varying Payloads and Adapters for Structural Dynamics and Loads

Science.gov (United States)

McGhee, David S.; Peck, Jeff A.; McDonald, Emmett J.

2012-01-01

This paper examines Probabilistic Sensitivity Analysis (PSA) methods and tools in an effort to understand their utility in vehicle loads and dynamic analysis. Specifically, this study addresses how these methods may be used to establish limits on payload mass and cg location and requirements on adaptor stiffnesses while maintaining vehicle loads and frequencies within established bounds. To this end, PSA methods and tools are applied to a realistic, but manageable, integrated launch vehicle analysis where payload and payload adaptor parameters are modeled as random variables. This analysis is used to study both Regional Response PSA (RRPSA) and Global Response PSA (GRPSA) methods, with a primary focus on sampling based techniques. For contrast, some MPP based approaches are also examined.

Mission studies on constellation of LEO satellites with remote-sensing and communication payloads

Science.gov (United States)

Chen, Chia-Ray; Hwang, Feng-Tai; Hsueh, Chuang-Wei

2017-09-01

Revisiting time and global coverage are two major requirements for most of the remote sensing satellites. Constellation of satellites can get the benefit of short revisit time and global coverage. Typically, remote sensing satellites prefer to choose Sun Synchronous Orbit (SSO) because of fixed revisiting time and Sun beta angle. The system design and mission operation will be simple and straightforward. However, if we focus on providing remote sensing and store-and-forward communication services for low latitude countries, Sun Synchronous Orbit will not be the best choice because we need more satellites to cover the communication service gap in low latitude region. Sometimes the design drivers for remote sensing payloads are conflicted with the communication payloads. For example, lower orbit altitude is better for remote sensing payload performance, but the communication service zone will be smaller and we need more satellites to provide all time communication service. The current studies focus on how to provide remote sensing and communication services for low latitude countries. A cost effective approach for the mission, i.e. constellation of microsatellites, will be evaluated in this paper.

Heavy ion beam-ionosphere interactions: Charging and neutralizing the payload

International Nuclear Information System (INIS)

Kaufmann, R.L.; Arnoldy, R.L.; Walker, D.N.; Holmes, J.C.; Pollock, C.J.; Cahill, L.J. Jr.; Kintner, P.M.

1989-01-01

The argon release controlled studies (ARCS 1-3) rocket flights carried ion generators to altitudes of 400-500 km in the nighttime auroral ionosphere. Three distinct electrical charging and neutralization processes were seen on the payloads during gun operation: steady or dc vehicle charging, brief charging at gun turn-on, and extended oscillatory sequences. Many of the unexpected consequences of gun firings are attributed to these payload charging and neutralization processes. Electrical charging is regulated by the rate at which low-energy electrons escape from the generator, which in turn is dependent on magnetic field geometry. Each ion generator produced a dipolar magnetic field which merged with the Earth's field near the rocket. The resulting local magnetic field guided electrons back to the rocket for certain gun orientations, thereby inhibiting neutralization. Transient charging was attributed to the formation of an electron cloud around at least some vehicles, while dc charging altered the rocket's surroundings until the electron escape rate balanced the ion beam flux. The authors concluded that during oscillatory events the entire environment of a payload could alternate between hot electron and cold electron configurations at very high rates, possibly exceeding 10 kHz. These changes in the plasma environment did not produce substantial electric field perturbations at the dc or ac high impedance electric field sensors, so were not seen in data from typical wave detectors. However, changes in plasma density and temperature produced dramatic effects on low impedance electric current sensors such as Langmuir probes

IMIS desktop & smartphone software solutions for monitoring spacecrafts' payload from anywhere

Science.gov (United States)

Baroukh, J.; Queyrut, O.; Airaud, J.

In the past years, the demand for satellite remote operations has increased guided by on one hand, the will to reduce operations cost (on-call operators out of business hours), and on the other hand, the development of cooperation space missions resulting in a world wide distribution of engineers and science team members. Only a few off-the-shelf solutions exist to fulfill the need of remote payload monitoring, and they mainly use proprietary devices. The recent advent of mobile technologies (laptops, smartphones and tablets) as well as the worldwide deployment of broadband networks (3G, Wi-Fi hotspots), has opened up a technical window that brings new options. As part of the Mars Science Laboratory (MSL) mission, the Centre National D'Etudes Spatiales (CNES, the French space agency) has developed a new software solution for monitoring spacecraft payloads. The Instrument Monitoring Interactive Software (IMIS) offers state-of-the-art operational features for payload monitoring, and can be accessed remotely. It was conceived as a generic tool that can be used for heterogeneous payloads and missions. IMIS was designed as a classical client/server architecture. The server is hosted at CNES and acts as a data provider while two different kinds of clients are available depending on the level of mobility required. The first one is a rich client application, built on Eclipse framework, which can be installed on usual operating systems and communicates with the server through the Internet. The second one is a smartphone application for any Android platform, connected to the server thanks to the mobile broadband network or a Wi-Fi connection. This second client is mainly devoted to on-call operations and thus only contains a subset of the IMIS functionalities. This paper describes the operational context, including security aspects, that led IMIS development, presents the selected software architecture and details the various features of both clients: the desktop and the sm

Potential of balloon payloads for in flight validation of direct and nulling interferometry concepts

Science.gov (United States)

Demangeon, Olivier; Ollivier, Marc; Le Duigou, Jean-Michel; Cassaing, Frédéric; Coudé du Foresto, Vincent; Mourard, Denis; Kern, Pierre; Lam Trong, Tien; Evrard, Jean; Absil, Olivier; Defrere, Denis; Lopez, Bruno

2010-07-01

While the question of low cost / low science precursors is raised to validate the concepts of direct and nulling interferometry space missions, balloon payloads offer a real opportunity thanks to their relatively low cost and reduced development plan. Taking into account the flight capabilities of various balloon types, we propose in this paper, several concepts of payloads associated to their flight plan. We also discuss the pros and cons of each concepts in terms of technological and science demonstration power.

STS-98 U.S. Lab Destiny is moved out of Atlantis' payload bay

Science.gov (United States)

2001-01-01

KENNEDY SPACE CENTER, Fla. -- Workers in the Payload Changeout Room check the U.S. Lab Destiny as its moves from Atlantis''' payload bay into the PCR. Destiny will remain in the PCR while Atlantis rolls back to the Vehicle Assembly Building to allow workers to conduct inspections, continuity checks and X-ray analysis on the 36 solid rocket booster cables located inside each booster'''s system tunnel. An extensive evaluation of NASA'''s SRB cable inventory revealed conductor damage in four (of about 200) cables on the shelf. Shuttle managers decided to prove the integrity of the system tunnel cables already on Atlantis.

STS-47 MS Jemison trains in SLJ module at MSFC Payload Crew Training Complex

Science.gov (United States)

1992-01-01

STS-47 Endeavour, Orbiter Vehicle (OV) 105, Mission Specialist (MS) Mae C. Jemison, wearing Autogenic Feedback Training System 2 suit, works with the Frog Embryology Experiment in a General Purpose Workstation (GPWS) in the Spacelab Japan (SLJ) module mockup at the Payload Crew Training Complex. The experiment will study the effects of weightlessness on the development of frog eggs fertilized in space. The Payload Crew Training Complex is located at the Marshall Space Flight Center (MSFC) in Huntsville, Alabama. View provided with alternate number 92P-139.

Expert System Software Assistant for Payload Operations

Science.gov (United States)

Rogers, Mark N.

1997-01-01

The broad objective of this expert system software based application was to demonstrate the enhancements and cost savings that can be achieved through expert system software utilization in a spacecraft ground control center. Spacelab provided a valuable proving ground for this advanced software technology; a technology that will be exploited and expanded for future ISS operations. Our specific focus was on demonstrating payload cadre command and control efficiency improvements through the use of "smart" software which monitors flight telemetry, provides enhanced schematic-based data visualization, and performs advanced engineering data analysis.

Reusable launch vehicles, enabling technology for the development of advanced upper stages and payloads

International Nuclear Information System (INIS)

Metzger, John D.

1998-01-01

In the near future there will be classes of upper stages and payloads that will require initial operation at a high-earth orbit to reduce the probability of an inadvertent reentry that could result in a detrimental impact on humans and the biosphere. A nuclear propulsion system, such as was being developed under the Space Nuclear Thermal Propulsion (SNTP) Program, is an example of such a potential payload. This paper uses the results of a reusable launch vehicle (RLV) study to demonstrate the potential importance of a Reusable Launch Vehicle (RLV) to test and implement an advanced upper stage (AUS) or payload in a safe orbit and in a cost effective and reliable manner. The RLV is a horizontal takeoff and horizontal landing (HTHL), two-stage-to-orbit (TSTO) vehicle. The results of the study shows that an HTHL is cost effective because it implements airplane-like operation, infrastructure, and flight operations. The first stage of the TSTO is powered by Rocket-Based-Combined-Cycle (RBCC) engines, the second stage is powered by a LOX/LH rocket engine. The TSTO is used since it most effectively utilizes the capability of the RBCC engine. The analysis uses the NASA code POST (Program to Optimize Simulated Trajectories) to determine trajectories and weight in high-earth orbit for AUS/advanced payloads. Cost and reliability of an RLV versus current generation expandable launch vehicles are presented

Atmospheric, Magnetospheric, and Plasmas in Space (AMPS) spacelab payload definition study, appendixes

Science.gov (United States)

Keeley, J. T.

1976-01-01

An equipment list, instrument baseline data, engineering drawings, mass properties computer printouts, electrical energy management, and control and display functional analysis pertinent to the AMPS (Satellite Payload) are presented.

Real-Time Payload Control and Monitoring on the World Wide Web

Science.gov (United States)

Sun, Charles; Windrem, May; Givens, John J. (Technical Monitor)

1998-01-01

World Wide Web (W3) technologies such as the Hypertext Transfer Protocol (HTTP) and the Java object-oriented programming environment offer a powerful, yet relatively inexpensive, framework for distributed application software development. This paper describes the design of a real-time payload control and monitoring system that was developed with W3 technologies at NASA Ames Research Center. Based on Java Development Toolkit (JDK) 1.1, the system uses an event-driven "publish and subscribe" approach to inter-process communication and graphical user-interface construction. A C Language Integrated Production System (CLIPS) compatible inference engine provides the back-end intelligent data processing capability, while Oracle Relational Database Management System (RDBMS) provides the data management function. Preliminary evaluation shows acceptable performance for some classes of payloads, with Java's portability and multimedia support identified as the most significant benefit.

Albumin–Polymer–Drug Conjugates: Long Circulating, High Payload Drug Delivery Vehicles

DEFF Research Database (Denmark)

Smith, Anton Allen Abbotsford; Zuwala, Kaja; Pilgram, Oliver

2016-01-01

Albumin is an exquisite tool of nature used in biomedicine to achieve long blood residence time for drugs, but the payload it can carry is typically limited to one molecule per protein. In contrast, synthetic macromolecular prodrugs contain multiple copies of drugs per polymer chain but offer only...... a marginal increase in the circulation lifetime of the drugs. We combine the benefits of the two platforms and at the same time overcome their respective limitations. Specifically, we develop the synthesis of albumin–polymer–drug conjugates to obtain long circulating, high payload drug delivery vehicles....... In vivo data validate that albumin endows the conjugate with a blood residence time similar to that of the protein and well exceeding that of the polymer. Therapeutic activity of the conjugates is validated using prodrugs of panobinostat, an HIV latency reversal agent, in which case the conjugates matched...

The space shuttle payload planning working groups: Volume 9: Materials processing and space manufacturing

Science.gov (United States)

1973-01-01

The findings and recommendations of the Materials Processing and Space Manufacturing group of the space shuttle payload planning activity are presented. The effects of weightlessness on the levitation processes, mixture stability, and control over heat and mass transport in fluids are considered for investigation. The research and development projects include: (1) metallurgical processes, (2) electronic materials, (3) biological applications, and (4)nonmetallic materials and processes. Additional recommendations are provided concerning the allocation of payload space, acceptance of experiments for flight, flight qualification, and private use of the space shuttle.

Regional Reproducibility of BOLD Calibration Parameter M, OEF and Resting-State CMRO2 Measurements with QUO2 MRI.

Directory of Open Access Journals (Sweden)

Isabelle Lajoie

Full Text Available The current generation of calibrated MRI methods goes beyond simple localization of task-related responses to allow the mapping of resting-state cerebral metabolic rate of oxygen (CMRO2 in micromolar units and estimation of oxygen extraction fraction (OEF. Prior to the adoption of such techniques in neuroscience research applications, knowledge about the precision and accuracy of absolute estimates of CMRO2 and OEF is crucial and remains unexplored to this day. In this study, we addressed the question of methodological precision by assessing the regional inter-subject variance and intra-subject reproducibility of the BOLD calibration parameter M, OEF, O2 delivery and absolute CMRO2 estimates derived from a state-of-the-art calibrated BOLD technique, the QUantitative O2 (QUO2 approach. We acquired simultaneous measurements of CBF and R2* at rest and during periods of hypercapnia (HC and hyperoxia (HO on two separate scan sessions within 24 hours using a clinical 3 T MRI scanner. Maps of M, OEF, oxygen delivery and CMRO2, were estimated from the measured end-tidal O2, CBF0, CBFHC/HO and R2*HC/HO. Variability was assessed by computing the between-subject coefficients of variation (bwCV and within-subject CV (wsCV in seven ROIs. All tests GM-averaged values of CBF0, M, OEF, O2 delivery and CMRO2 were: 49.5 ± 6.4 mL/100 g/min, 4.69 ± 0.91%, 0.37 ± 0.06, 377 ± 51 μmol/100 g/min and 143 ± 34 μmol/100 g/min respectively. The variability of parameter estimates was found to be the lowest when averaged throughout all GM, with general trends toward higher CVs when averaged over smaller regions. Among the MRI measurements, the most reproducible across scans was R2*0 (wsCVGM = 0.33% along with CBF0 (wsCVGM = 3.88% and R2*HC (wsCVGM = 6.7%. CBFHC and R2*HO were found to have a higher intra-subject variability (wsCVGM = 22.4% and wsCVGM = 16% respectively, which is likely due to propagation of random measurement errors, especially for CBFHC due to the

ISS Microgravity Research Payload Training Methodology

Science.gov (United States)

Schlagheck, Ronald; Geveden, Rex (Technical Monitor)

2001-01-01

The NASA Microgravity Research Discipline has multiple categories of science payloads that are being planned and currently under development to operate on various ISS on-orbit increments. The current program includes six subdisciplines; Materials Science, Fluids Physics, Combustion Science, Fundamental Physics, Cellular Biology and Macromolecular Biotechnology. All of these experiment payloads will require the astronaut various degrees of crew interaction and science observation. With the current programs planning to build various facility class science racks, the crew will need to be trained on basic core operations as well as science background. In addition, many disciplines will use the Express Rack and the Microgravity Science Glovebox (MSG) to utilize the accommodations provided by these facilities for smaller and less complex type hardware. The Microgravity disciplines will be responsible to have a training program designed to maximize the experiment and hardware throughput as well as being prepared for various contingencies both with anomalies as well as unexpected experiment observations. The crewmembers will need various levels of training from simple tasks as power on and activate to extensive training on hardware mode change out to observing the cell growth of various types of tissue cultures. Sample replacement will be required for furnaces and combustion type modules. The Fundamental Physics program will need crew EVA support to provide module change out of experiment. Training will take place various research centers and hardware development locations. It is expected that onboard training through various methods and video/digital technology as well as limited telecommunication interaction. Since hardware will be designed to operate from a few weeks to multiple research increments, flexibility must be planned in the training approach and procedure skills to optimize the output as well as the equipment maintainability. Early increment lessons learned

Pay-load Estimation of a 2 DOF Flexible Link Robot

DEFF Research Database (Denmark)

Poulsen, Niels Kjølstad; Ravn, Ole

2005-01-01

. Although the applied principle might be general in nature, the pa-per is applied to the well-known problem of identifying a pay-load of a moving flexible robot. This problem is almost impossible to solve by measurements, so an estimation technique must be applied. The presented method benefits from...

O/OREOS Nanosatellite: A Multi-Payload Technology Demonstration

OpenAIRE

Minelli, Giovanni; Ricco, Antonio; Beasley, Christopher; Hines, John; Agasid, Elwood; Yost, Bruce; Squires, David; Friedericks, Charlie; Piccini, Matthew; Defouw, Greg; McIntyre, Mike; Ricks, Robert; Parra, Macarena; Diaz-Aguado, Millan; Timucin, Linda

2010-01-01

The Organism/Organic Exposure to Orbital Stresses (O/OREOS) nanosatellite follows in the footsteps of the successful GeneSat-1 and PharmaSat missions to validate key technologies developed to conduct compelling science experiments in space for a small price tag. Developed by the Small Spacecraft Division at NASA Ames Research Center, the 5.5-kg 3U satellite contains two completely independent payloads and a novel drag-enhancing device which shortens the spacecraft’s orbital lifetime, thereby ...

RTP/I Payload Type Definition for Chat Tools

OpenAIRE

Vogel, Jürgen

2001-01-01

This document specifies an application-level protocol (i.e., payload type) for chat tools using the Real Time Protocol for Distributed Interactive Media (RTP/I). RTP/I defines a standardized framing for the transmission of application data and provides protocol mechanisms that are universally needed for the class of distributed interactive media. A chat tool provides an instant messaging service among an arbitrary number of users. This documents specifies how to employ a chat tool with RTP/I ...

Sirje ja Harald. Sült ja sõleke / Pille-Riin Purje

Index Scriptorium Estoniae

Purje, Pille-Riin, 1963-

2009-01-01

Kahest Endla teatri lavastusest: Raimonds Paulsi muusikal põhinevast muusikalavastustusest "Raimonds", lavastaja Tiit Palu, esietendus 7. märtsil. Urmas Vadi pseudoajaloolisest põnevusloost "Ballettmeister", lavastaja Andres Noormets, esietendus 30. aprillil

Concept Design of the Payload Handling Manipulator System. [space shuttle orbiters

Science.gov (United States)

1975-01-01

The design, requirements, and interface definition of a remote manipulator system developed to handle orbiter payloads are presented. End effector design, control system concepts, and man-machine engineering are considered along with crew station requirements and closed circuit television system performance requirements.

Freeform Optics for Optical Payloads with Reduced Size and Weight, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Future optical systems for NASA's low-cost missions such as CubeSat and other small-scale payloads are constrained by the traditional spherical form of optics. As...

Nähtamatu õnnelik lõpp? / Pille-Riin Purje

Index Scriptorium Estoniae

Purje, Pille-Riin, 1963-

2004-01-01

Jim Jacobsi ja Warren Casey muusikal "Grease" Eesti Riikliku Nukuteatri esituses Tallinna Linnahallis, A. Ayckbourni "Mänguplaan" Vanalinnastuudios, R. Topori "Talv laua all" Rakvere Teatris ja U. Vadi "Kohtume trompetis" VAT Teatris

STS-95 Payload Specialist Glenn and his wife pose before their return flight to JSC

Science.gov (United States)

1998-01-01

At the Skid Strip at Cape Canaveral Air Station, STS-95 Payload Specialist John H. Glenn Jr., a senator from Ohio and one of the original seven Project Mercury astronauts, poses with his wife Annie before their return flight to the Johnson Space Center in Houston, Texas. The STS-95 mission ended with landing at Kennedy Space Center's Shuttle Landing Facility at 12:04 p.m. EST on Nov. 7. The STS-95 crew also includes Mission Commander Curtis L. Brown Jr.; Pilot Steven W. Lindsey; Mission Specialist Scott E. Parazynski; Mission Specialist Stephen K. Robinson; Mission Specialist Pedro Duque, with the European Space Agency (ESA); and Payload Specialist Chiaki Mukai, with the National Space Development Agency of Japan (NASDA). The mission included research payloads such as the Spartan-201 solar-observing deployable spacecraft, the Hubble Space Telescope Orbital Systems Test Platform, the International Extreme Ultraviolet Hitchhiker, as well as a SPACEHAB single module with experiments on space flight and the aging process.

Adaptive output-based command shaping for sway control of a 3D overhead crane with payload hoisting and wind disturbance

Science.gov (United States)

Abdullahi, Auwalu M.; Mohamed, Z.; Selamat, H.; Pota, Hemanshu R.; Zainal Abidin, M. S.; Ismail, F. S.; Haruna, A.

2018-01-01

Payload hoisting and wind disturbance during crane operations are among the challenging factors that affect a payload sway and thus, affect the crane's performance. This paper proposes a new online adaptive output-based command shaping (AOCS) technique for an effective payload sway reduction of an overhead crane under the influence of those effects. This technique enhances the previously developed output-based command shaping (OCS) which was effective only for a fixed system and without external disturbances. Unlike the conventional input shaping design technique which requires the system's natural frequency and damping ratio, the proposed technique is designed by using the output signal and thus, an online adaptive algorithm can be formulated. To test the effectiveness of the AOCS, experiments are carried out using a laboratory overhead crane with a payload hoisting in the presence of wind, and with different payloads. The superiority of the method is confirmed by 82% and 29% reductions in the overall sway and the maximum transient sway respectively, when compared to the OCS, and two robust input shapers namely Zero Vibration Derivative-Derivative and Extra-Insensitive shapers. Furthermore, the method demonstrates a uniform crane's performance under all conditions. It is envisaged that the proposed method can be very useful in designing an effective controller for a crane system with an unknown payload and under the influence of external disturbances.

An advanced material science payload for GAS

Science.gov (United States)

Joensson, R.; Wallin, S.; Loeth, K.

1986-01-01

The aim of the experiment is to study solidification of different compositions of lead-tin. The weight of the material is quite high: 8 kilograms. Nearly 10% of the payload is sample weight. The dendritic growth and the effect of the absence of natural convection are of particular interest. The results from the flight processed samples will be compared with results from Earth processed samples in order to investigate the influence of the natural convection on the solidification process. The power systems, heat storage and rejection, and mechanical support are discussed in relationship to the scientific requirements.

Entering 'A NEW REALM' of KIBO Payload Operations - Continuous efforts for microgravity experiment environment and lessons learned from real time experiment operations in KIBO -

International Nuclear Information System (INIS)

Sakagami, K; Goto, M; Matsumoto, S; Ohkuma, H

2011-01-01

On January 22nd, 2011(JST), KOUNOTORI2 (H-II Transfer Vehicle: HTV2) was successfully launched from Tanegashima Space Center toward the International Space Station (ISS) and two new JAXA payload racks, Kobairo rack and MSPR (Multi-purpose Small Payload Rack) were transferred to ISS/KIBO (Japanese Experiment Module: JEM). In addition to Saibo rack and Ryutai rack which are already in operation in KIBO, in total 4 Japanese experiment payload racks start operations in KIBO. Then KIBO payload operations embark on a new realm, full utilization phase. While the number and variety of microgravity experiments become increasing, simultaneous operation constraints should be considered to achieve multitask payload operations in ISS/KIBO and ever more complicated cooperative operations between crewmember and flight control team/science team are required. Especially for g-jitter improvement in ISS/KIBO, we have greatly advanced cooperative operations with crewmember in the recent increment based on the microgravity data analysis results. In this paper, newly operating Japanese experiment payloads characteristics and some methods to improve g-jitter environment are introduced from the front line of KIBO payload operations.

STS-55 MS1/PLC Ross monitors Payload Specialist Walter's Anthrorack activity

Science.gov (United States)

1993-01-01

STS-55 German Payload Specialist 1 Ulrich Walter breathes into Rack 9 Anthrorack (AR) (Human Physiology Laboratory) device for Pulmonary Perfusion and Ventilation During Rest and Exercise experiment while working inside the Spacelab Deutsche 2 (SL-D2) science module aboard the Earth-orbiting Columbia, Orbiter Vehicle (OV) 102. Seated on the bicycle ergometer, Walter utilizes the respiratory monitoring system, part of a broad battery of experiments designed to investigate human physiology under microgravity conditions. In the background, Mission Specialist 1 (MS1) and Payload Commander (PLC) Jerry L. Ross monitors Walter's activity. Walter represents the German Aerospace Research Establishment (DLR) on the 10-day SL-D2 mission. Visible on the aft end cone are a fire extinguisher and the Crew Telesupport Experiment (CTE) Macintosh portable computer mounted on an adjustable work platform.

STS-9 payload specialist Merbold and backup Ockels in training session

Science.gov (United States)

1983-01-01

STS-9 payload specialist Ulf Merbold, right, a West German physicist and backup Wubbo Ockels, a Dutch scientist, are pictured in a training session in JSC's Shuttle mockup and integration laboratory. In this view Ockels appears to be showing Merbold how to operate a camera.

Ares V: Enabling Unprecedented Payloads for Space in the 21st Century

Science.gov (United States)

Creech, Steve

2010-01-01

Numerous technical and programmatic studies since the U.S. space program began in the 1960s has emphasized the need for a heavy lift capability for exploration beyond low Earth orbit (LEO). The Saturn V once embodied that capability until it was retired. Now the Ares V cargo launch vehicle (CaLV) promises to restore and improve on that capability, providing unprecedented opportunities for human and robotic exploration, science, national security and commercial uses. This paper provides an overview of the capabilities of Ares V, both as an opportunity for payloads of increased mass and/or volume, and as a means of reducing risk in the payload design process. The Ares V is part of NASA s Constellation Program, which also includes the Ares I crew launch vehicle (CLV), Orion crew exploration vehicle (CEV), and Altair lunar lander. This architecture is designed to carry out the national space policy goals of completing the International Space Station (ISS), retiring the Space Shuttle fleet, and expanding human exploration beyond LEO. The Ares V is designed to loft upper stages and/or cargo, such as the Altair lander, into LEO. The Ares I is designed to put Orion into LEO with a crew of up to four for rendezvous with the ISS or with the Ares V Earth departure stage for journeys to the Moon. While retaining the goals of heritage hardware and commonality, the Ares V configuration continues to be refined through a series of internal trades. The current reference configuration was recommended by the Ares Projects and approved by the Constellation Program during the Lunar Capabilities Concept Review (LCCR) June 2008. The reference configuration defines the Ares V as 381 feet (116m) tall with a gross lift-off mass (GLOM) of 8.1 million pounds (3,704.5 mT). Its first stage will generate 11 million pounds of sea-level liftoff thrust. It will be capable of launching 413,800 pounds (187.7 mT) to LEO, 138,500 pounds (63 mT) direct to the Moon or 156,700 pounds (71.1 mT) in its dual

Cryo-braking using penetrators for enhanced capabilities for the potential landing of payloads on icy solar system objects

Science.gov (United States)

Winglee, R. M.; Robinson, T.; Danner, M.; Koch, J.

2018-03-01

The icy moons of Jupiter and Saturn are important astrobiology targets. Access to the surface of these worlds is made difficult by the high ΔV requirements which is typically in the hypervelocity range. Passive braking systems cannot be used due to the lack of an atmosphere, and active braking by rockets significantly adds to the missions costs. This paper demonstrates that a two-stage landing system can overcome these problems and provide significant improvements in the payload fraction that can be landed The first stage involves a hypervelocity impactor which is designed to penetrate to a depth of a few tens of meters. This interaction is the cryo-breaking component and is examined through laboratory experiments, empirical relations and modeling. The resultant ice-particle cloud creates a transient artificial atmosphere that can be used to enable passive braking of the second stage payload dd, with a substantially higher mass payload fraction than possible with a rocket landing system. It is shown that a hollow cylinder design for the impactor can more efficiently eject the material upwards in a solid cone of ice particles relative to solid impactors such as spheres or spikes. The ejected mass is shown to be of the order of 103 to 104 times the mass of the impactor. The modeling indicates that a 10 kg payload with a braking system of 3 m2 (i.e. an areal density of 0.3 kg/m2) is sufficient to allow the landing of the payload with the deceleration limited to less than 2000 g's. Modern electronics can withstand this deceleration and as such the system provides an important alternative to landing payloads on icy solar system objects.

Micromotors Spontaneously Neutralize Gastric Acid for pH-Responsive Payload Release.

Science.gov (United States)

Li, Jinxing; Angsantikul, Pavimol; Liu, Wenjuan; Esteban-Fernández de Ávila, Berta; Thamphiwatana, Soracha; Xu, Mingli; Sandraz, Elodie; Wang, Xiaolei; Delezuk, Jorge; Gao, Weiwei; Zhang, Liangfang; Wang, Joseph

2017-02-13

The highly acidic gastric environment creates a physiological barrier for using therapeutic drugs in the stomach. While proton pump inhibitors have been widely used for blocking acid-producing enzymes, this approach can cause various adverse effects. Reported herein is a new microdevice, consisting of magnesium-based micromotors which can autonomously and temporally neutralize gastric acid through efficient chemical propulsion in the gastric fluid by rapidly depleting the localized protons. Coating these micromotors with a cargo-containing pH-responsive polymer layer leads to autonomous release of the encapsulated payload upon gastric-acid neutralization by the motors. Testing in a mouse model demonstrate that these motors can safely and rapidly neutralize gastric acid and simultaneously release payload without causing noticeable acute toxicity or affecting the stomach function, and the normal stomach pH is restored within 24 h post motor administration. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Onboard Autonomy and Ground Operations Automation for the Intelligent Payload Experiment (IPEX) CubeSat Mission

Science.gov (United States)

Chien, Steve; Doubleday, Joshua; Ortega, Kevin; Tran, Daniel; Bellardo, John; Williams, Austin; Piug-Suari, Jordi; Crum, Gary; Flatley, Thomas

2012-01-01

The Intelligent Payload Experiment (IPEX) is a cubesat manifested for launch in October 2013 that will flight validate autonomous operations for onboard instrument processing and product generation for the Intelligent Payload Module (IPM) of the Hyperspectral Infra-red Imager (HyspIRI) mission concept. We first describe the ground and flight operations concept for HyspIRI IPM operations. We then describe the ground and flight operations concept for the IPEX mission and how that will validate HyspIRI IPM operations. We then detail the current status of the mission and outline the schedule for future development.

Dobson space telescope: development of an optical payload of the next generation

Science.gov (United States)

Segert, Tom; Danziger, Björn; Gork, Daniel; Lieder, Matthias

2017-11-01

The Dobson Space Telescope (DST) is a research project of the Department of Astronautics at the TUBerlin. For Development and commercialisation there is a close cooperation with the network of the Berlin Space Industry (RIBB). Major Partner is the Astro- und Feinwerktechnik Adlershof GmbH a specialist for space structures and head of the industry consortia which built the DLR BIRD micro satellite. The aim of the project is to develop a new type of deployable telescope that can overcome the mass and volume limitations of small satellites. With the DST payload micro satellites of the 100kg class will be able to carry 50cm main mirror diameter optics (→ 1m GSD). Basis of this technology is the fact that a telescope is mainly empty space between the optical elements. To fold down the telescope during launch and to undfold it after the satellite reached its orbit can save 70% of payload volume and 50% of payload mass. Since these advantages continue along the value added chain DST is of highest priority for the next generation of commercial EO micro satellites. Since 2002 the key technologies for DST have been developed in test benches in Labs of TU-Berlin and were tested on board a ESA parabolic flight campaign in 2005. The development team at TU-Berlin currently prepares the foundation of a start-up company for further development and commercialisation of DST.

Status quo of management of the human tissue banks in Taiwan.

Science.gov (United States)

Chou, Ching-Pang; Chou, Szu-Cheng; Chen, Ying-Hua; Chen, Yu-Hsuan; Lee, Ming-Shin

2017-03-01

As the technologies associated with transplantation and biological tissue engineering continue to advance, human cells and tissues form an integral part to the practice of regenerative medicine. The patient's use of tissues entails the risk of introducing, transmitting and spreading communicable diseases. To prevent such risk and to ensure that the human organs, tissues and cells remain intact and functional after being handled and processed, the transplanted tissues must be subject to good management standards through all stages of collection, screening, processing, storage and distribution as the safety of the users is of the utmost importance. On February 2009, the government of Taiwan promulgated the Regulations for Administration on Human Organ Bank that requires all human tissues banks to adhere to the Good Tissue Practice for Human Organ, Tissue and Cell in terms of establishment and operation in order to cope with the international management trend and the development and management need of the domestic industry. Six years have passed since the law became effective. This article seeks to introduce the current management mechanism and status quo of management of human tissue banks in Taiwan. We also conducted statistical analysis of the data relating to the tissue banks to identify potential risks and the room for improvement. The study concludes that human tissue banks in Taiwan are on the right track with their management practice, leading to a state of steady development and progress.

Lung surfactant microbubbles increase lipophilic drug payload for ultrasound-targeted delivery.

Science.gov (United States)

Sirsi, Shashank R; Fung, Chinpong; Garg, Sumit; Tianning, Mary Y; Mountford, Paul A; Borden, Mark A

2013-01-01

The cavitation response of circulating microbubbles to targeted ultrasound can be used for noninvasive, site-specific delivery of shell-loaded materials. One challenge for microbubble-mediated delivery of lipophilic compounds is the limitation of drug loading into the microbubble shell, which is commonly a single phospholipid monolayer. In this study, we investigated the use of natural lung surfactant extract (Survanta(®), Abbott Nutrition) as a microbubble shell material in order to improve drug payload and delivery. Pulmonary surfactant extracts such as Survanta contain hydrophobic surfactant proteins (SP-B and SP-C) that facilitate lipid folding and retention on lipid monolayers. Here, we show that Survanta-based microbubbles exhibit wrinkles in bright-field microscopy and increased lipid retention on the microbubble surface in the form of surface-associated aggregates observed with fluorescence microscopy. The payload of a model lipophilic drug (DiO), measured by flow cytometry, increased by over 2-fold compared to lipid-coated microbubbles lacking SP-B and SP-C. Lung surfactant microbubbles were highly echogenic to contrast enhanced ultrasound imaging at low acoustic intensities. At higher ultrasound intensity, excess lipid was observed to be acoustically cleaved for localized release. To demonstrate targeting, a biotinylated lipopolymer was incorporated into the shell, and the microbubbles were subjected to a sequence of radiation force and fragmentation pulses as they passed through an avidinated hollow fiber. Lung surfactant microbubbles showed a 3-fold increase in targeted deposition of the model fluorescent drug compared to lipid-only microbubbles. Our results demonstrate that lung surfactant microbubbles maintain the acoustic responsiveness of lipid-coated microbubbles with the added benefit of increased lipophilic drug payload.

Kirjanduslik orgia?! Tänan, ei! / Raul Sulbi

Index Scriptorium Estoniae

Sulbi, Raul

2002-01-01

Arkaadia järjejutt (juuni - august 2002, autorid Wimberg, Veiko Märka, Urmas Vadi, Jürgen Rooste, Aapo Ilves, Aarne Ruben, Matt Barker, Hedda Maurer, Ivar Sild, Karen Orlau, Indrek Hargla, Jan Kaus, Mehis Heinsaar)

Computational Fluid Dynamics (CFD) Analysis Of Optical Payload For Lasercomm Science (OPALS) sealed enclosure module

Science.gov (United States)

Anderson, Kevin R.; Zayas, Daniel; Turner, Daniel

2012-01-01

Computational Fluid Dynamics (CFD) using the commercial CFD package CFDesign has been performed at NASA Jet Propulsion Laboratory (JPL) California Institute of Technology (Caltech) in support of the Phaeton Early Career Hire Program's Optical Payload for Lasercomm Science (OPALS) mission. The OPALS project is one which involves an International Space Station payload that will be using forced convection cooling in a hermetically sealed enclosure at 1 atm of air to cool "off-the-shelf" vendor electronics. The CFD analysis was used to characterize the thermal and fluid flow environment within a complicated labyrinth of electronics boards, fans, instrumentation, harnessing, ductwork and heat exchanger fins. The paradigm of iteratively using CAD/CAE tools and CFD was followed in order to determine the optimum flow geometry and heat sink configuration to yield operational convective film coefficients and temperature survivability limits for the electronics payload. Results from this current CFD analysis and correlation of the CFD model against thermal test data will be presented. Lessons learned and coupled thermal / flow modeling strategies will be shared in this paper.

WP 2 Report: Integrated Status Quo and Trends Assessment in Wuxi. Overview of WP 2 Results

Energy Technology Data Exchange (ETDEWEB)

Dienst, Carmen; Hoeller, Samuel; Saurat, Mathieu; Schneider, Clemens; Xia-Bauer, Chun (Wuppertal Institute (Germany)); Oberheitmann, Andreas (China Environmental Research (China)); Fischer, Tom; Gemmer, Marco; Jiang Tong (China Meteorological Administration, National Climate Centre (China)); Wang Can; Wang Haoping (Tsinghua University, Research Centre for International Environmental Policy (China)); Ren Hongyan; Sui Xinying (Wuxi Low Carbon Development Research Centre (China))

2013-04-01

The overall project will scientifically explore the Low Carbon Future City (LCFC) concept in two case studies: the German region of Dusseldorf and the Chinese city of Wuxi, Jiangsu Province. The Wuppertal Institute together with a consortium of Chinese scientific institutes is developing integrated low carbon city strategies for the two pilot regions. The project is funded by the German Stiftung Mercator. Provided in this report, as part of the scientific analysis of the Chinese pilot region, is a comprehensive status quo and trends assessment of greenhouse gas emissions, climate change and resource use in Wuxi. It includes a GHG inventory, a business-as-usual scenario for GHG emissions, scenarios for future climate change and its impacts as well as an analysis of future resource use in the energy and buildings sector of Wuxi. Based on this assessment, the authors have selected key sectors for which low carbon scenarios as well as policy strategies will be finalised.

Vikergallup : eesti kirjandus 2002 : vastused Vikerkaare küsimustele / Lauri Eesmaa, Indrek Hargla, Tõnu Kaalep... [jt.

Index Scriptorium Estoniae

2003-01-01

2002. a. parima uudisraamatu tiitlit jagasid Vaino Vahingu "Mängud ja kõnelused", Anton Nigovi "Harjutused", Heiti Kenderi "Lend", Urmas Vadi "Unetute ralli" ja Emil Tode "Raadio"; parimaks esikraamatuks valiti Priit Kruusi "Ring ümber teiste"

When Corporate Social Responsibility (CSR) Meets Organizational Psychology: New Frontiers in Micro-CSR Research, and Fulfilling a Quid Pro Quo through Multilevel Insights.

Science.gov (United States)

Jones, David A; Willness, Chelsea R; Glavas, Ante

2017-01-01

Researchers, corporate leaders, and other stakeholders have shown increasing interest in Corporate Social Responsibility (CSR)-a company's discretionary actions and policies that appear to advance societal well-being beyond its immediate financial interests and legal requirements. Spanning decades of research activity, the scholarly literature on CSR has been dominated by meso- and macro-level perspectives, such as studies within corporate strategy that examine relationships between firm-level indicators of social/environmental performance and corporate financial performance. In recent years, however, there has been an explosion of micro-oriented CSR research conducted at the individual level of analysis, especially with respect to studies on how and why job seekers and employees perceive and react to CSR practices. This micro-level focus is reflected in 12 articles published as a Research Topic collection in Frontiers in Psychology (Organizational Psychology Specialty Section) titled "CSR and organizational psychology: Quid pro quo." In the present article, the authors summarize and integrate findings from these Research Topic articles. After describing some of the "new frontiers" these articles explore and create, the authors strive to fulfill a "quid pro quo" with some of the meso- and macro-oriented CSR literatures that paved the way for micro-CSR research. Specifically, the authors draw on insights from the Research Topic articles to inform a multilevel model that offers multiple illustrations of how micro-level processes among individual stakeholders can explain variability in meso (firm)-level relationships between CSR practices and corporate performance. The authors also explore an important implication of these multilevel processes for macro-level societal impact.

Post-harvest technologies for various crops of pakistan: status quo, employment generation and prospects

International Nuclear Information System (INIS)

Ahmad, M.

2005-01-01

The climatic conditions of Pakistan vary from tropical to temperate, allow 40 different kinds of vegetables, 21 type of fruit, and 5 major crops (wheat, cotton, rice, sugarcane, and maize) to grow. During the peak harvest-season, a great proportion of fresh agricultural/horticultural produce is lost, due to unavailability of suitable post-harvest technologies. An effort was made to present the status quo, constraints, Government policies and possible post-harvest technologies that can be developed/adopted in the country to generate employment in the rural areas. Secondary processing-industry (flour mills, sugar mills, oil mills etc.) is fairly developed in the country. However. primary processing of agricultural produce is poorly developed in the country. The higher cost of the processed products, consumers habits of eating fresh commodities, seasonability of fresh fruit and vegetables, and low quality of the processed products are the key-constraints for the slow growth of post-harvest processing industry. By removing these constraints, and by developing/adopting various technologies, identified in this paper, we may help to establish post-harvest processing industry on sound footings. Consequently, the employment-opportunities will increase in the rural areas of the country. (author)

COBALT: A GN&C Payload for Testing ALHAT Capabilities in Closed-Loop Terrestrial Rocket Flights

Science.gov (United States)

Carson, John M., III; Amzajerdian, Farzin; Hines, Glenn D.; O'Neal, Travis V.; Robertson, Edward A.; Seubert, Carl; Trawny, Nikolas

2016-01-01

The COBALT (CoOperative Blending of Autonomous Landing Technology) payload is being developed within NASA as a risk reduction activity to mature, integrate and test ALHAT (Autonomous precision Landing and Hazard Avoidance Technology) systems targeted for infusion into near-term robotic and future human space flight missions. The initial COBALT payload instantiation is integrating the third-generation ALHAT Navigation Doppler Lidar (NDL) sensor, for ultra high-precision velocity plus range measurements, with the passive-optical Lander Vision System (LVS) that provides Terrain Relative Navigation (TRN) global-position estimates. The COBALT payload will be integrated onboard a rocket-propulsive terrestrial testbed and will provide precise navigation estimates and guidance planning during two flight test campaigns in 2017 (one open-loop and closed- loop). The NDL is targeting performance capabilities desired for future Mars and Moon Entry, Descent and Landing (EDL). The LVS is already baselined for TRN on the Mars 2020 robotic lander mission. The COBALT platform will provide NASA with a new risk-reduction capability to test integrated EDL Guidance, Navigation and Control (GN&C) components in closed-loop flight demonstrations prior to the actual mission EDL.

STS-95 Payload Specialist Duque arrives at KSC to participate in a SPACEHAB familiarization exercise

Science.gov (United States)

1998-01-01

STS-95 Payload Specialist Pedro Duque of Spain, who represents the European Space Agency (ESA), waves after arriving in a T-38 jet aircraft at the Shuttle Landing Facility at KSC. He is joining other STS-95 crew members in a familiarization tour of the SPACEHAB module and the equipment that will fly with them on the Space Shuttle Discovery scheduled to launch Oct. 29, 1998. The mission includes research payloads such as the Spartan solar- observing deployable spacecraft, the Hubble Space Telescope Orbital Systems Test Platform, the International Extreme Ultraviolet Hitchhiker, as well as the SPACEHAB single module with experiments on space flight and the aging process.

Separable and Error-Free Reversible Data Hiding in Encrypted Image with High Payload

Directory of Open Access Journals (Sweden)

Zhaoxia Yin

2014-01-01

Full Text Available This paper proposes a separable reversible data-hiding scheme in encrypted image which offers high payload and error-free data extraction. The cover image is partitioned into nonoverlapping blocks and multigranularity encryption is applied to obtain the encrypted image. The data hider preprocesses the encrypted image and randomly selects two basic pixels in each block to estimate the block smoothness and indicate peak points. Additional data are embedded into blocks in the sorted order of block smoothness by using local histogram shifting under the guidance of the peak points. At the receiver side, image decryption and data extraction are separable and can be free to choose. Compared to previous approaches, the proposed method is simpler in calculation while offering better performance: larger payload, better embedding quality, and error-free data extraction, as well as image recovery.

TLÜ auhinnad Vadile, Rauale ja Grigorjevale

Index Scriptorium Estoniae

2013-01-01

Tallinna ülikooli kirjandusauhinna võitis algupärandite kategoorias Urmas Vadi "Tagasi Eestisse", tõlke kategoorias Rein Raua tõlge Dante Alighieri teosest "Vita Nova" ja ajakirjanduses ilmunud lühipublikatsioonide kategoorias Sveta Grigorjeva Vikerkaares ilmunud luuletuste eest

Kanepikasvatajate unine suvi / Jüri Ehlvest

Index Scriptorium Estoniae

Ehlvest, Jüri, 1967-2006

2002-01-01

Arkaadia järjejutust, ilmus juuni - august 2002 Eesti Päevalehes, autorid: Wimberg, Veiko Märka, Urmas Vadi, Jürgen Rooste, Aapo Ilves, Aarne Ruben, Matt Barker, Hedda Maurer, Ivar Sild, Karen Orlau, Indrek Hargla, Jan Kaus, Mehis Heinsaar

Space transportation system flight 2 OSTA-1 scientific payload data management plan: Addendum

Science.gov (United States)

1982-01-01

Flight events for the OSTA-1 scientific payload on the second flight of the Space Shuttle, STS-2 are described. Data acquisition is summarized. A discussion of problems encountered and a preliminary evaluation of data quality is also provided.

Dynamics and Embedded Internet of Things Input Shaping Control for Overhead Cranes Transporting Multibody Payloads

Directory of Open Access Journals (Sweden)

Gerardo Peláez

2018-06-01

Full Text Available Input shaping is an Optimal Control feedforward strategy whose ability to define how and when a flexible dynamical system defined by Ordinary Differential Equations (ODEs and computer controlled would move into its operative space, without command induced unwanted dynamics, has been exhaustively demonstrated. This work examines the issue of Embedded Internet of Things (IoT Input Shaping with regard to real time control of multibody oscillatory systems whose dynamics are better described by differential algebraic equations (DAEs. An overhead crane hanging a double link multibody payload has been appointed as a benchmark case; it is a multibody, multimode system. This might be worst scenario to implement Input Shaping. The reasons can be found in the wide array of constraints that arise. Firstly, the reliability of the multibody model was tested on a Functional Mock-Up Interface (FMI with the two link payload suspended from the trolley by comparing the experimental video tapping signals in time domain faced with the signals extracted from the multibody model. The FFTs of the simulated and the experimental signal contain the same frequency harmonics only with somewhat different power due to the real world light damping in the joints. The application of this approach may be extended to other cases i.e., the usefulness of mobile hydraulic cranes is limited because the payload is supported by an overhead cable under tension that allows oscillation to occur during crane motion. If the payload size is not negligible small when compared with the cable length may introduce an additional oscillatory mode that creates a multibody double pendulum. To give the insight into the double pendulum dynamics by Lagrangian methods two slender rods as payloads are analyzed dealing with the overhead crane and a composite revolute-revolute joint is proposed to model the cable of the hydraulic crane, both assumptions facilitates an affordable analysis. This allows

Dynamics and Embedded Internet of Things Input Shaping Control for Overhead Cranes Transporting Multibody Payloads.

Science.gov (United States)

Peláez, Gerardo; Vaugan, Joshua; Izquierdo, Pablo; Rubio, Higinio; García-Prada, Juan Carlos

2018-06-04

Input shaping is an Optimal Control feedforward strategy whose ability to define how and when a flexible dynamical system defined by Ordinary Differential Equations (ODEs) and computer controlled would move into its operative space, without command induced unwanted dynamics, has been exhaustively demonstrated. This work examines the issue of Embedded Internet of Things (IoT) Input Shaping with regard to real time control of multibody oscillatory systems whose dynamics are better described by differential algebraic equations (DAEs). An overhead crane hanging a double link multibody payload has been appointed as a benchmark case; it is a multibody, multimode system. This might be worst scenario to implement Input Shaping. The reasons can be found in the wide array of constraints that arise. Firstly, the reliability of the multibody model was tested on a Functional Mock-Up Interface (FMI) with the two link payload suspended from the trolley by comparing the experimental video tapping signals in time domain faced with the signals extracted from the multibody model. The FFTs of the simulated and the experimental signal contain the same frequency harmonics only with somewhat different power due to the real world light damping in the joints. The application of this approach may be extended to other cases i.e., the usefulness of mobile hydraulic cranes is limited because the payload is supported by an overhead cable under tension that allows oscillation to occur during crane motion. If the payload size is not negligible small when compared with the cable length may introduce an additional oscillatory mode that creates a multibody double pendulum. To give the insight into the double pendulum dynamics by Lagrangian methods two slender rods as payloads are analyzed dealing with the overhead crane and a composite revolute-revolute joint is proposed to model the cable of the hydraulic crane, both assumptions facilitates an affordable analysis. This allows developing a general

Structural Optimisation Of Payload Fairings

Science.gov (United States)

Santschi, Y.; Eaton, N.; Verheyden, S.; Michaud, V.

2012-07-01

RUAG Space are developing materials and processing technologies for manufacture of the Next Generation Launcher (NGL) payload fairing, together with the Laboratory of Polymer and Composite Technology at the EPFL, in a project running under the ESA Future Launchers Preparatory Program (FLPP). In this paper the general aims and scope of the project are described, details of the results obtained shall be presented at a later stage. RUAG Space design, develop and manufacture fairings for the European launch vehicles Ariane 5 and VEGA using well proven composite materials and production methods which provide adequate cost/performance ratio for these applications. However, the NGL shall make full use of innovations in materials and process technologies to achieve a gain in performance at a much reduced overall manufacturing cost. NGL is scheduled to become operational in 2025, with actual development beginning in 2014. In this current project the basic technology is being developed and validated, in readiness for application in the NGL. For this new application, an entirely new approach to the fairing manufacture is evaluated.

STS-55 MS1/PLC Ross and Payload Specialist Walter work in SL-D2 module

Science.gov (United States)

1993-01-01

STS-55 Mission Specialist 1 (MS1) and Payload Commander (PLC) Jerry L. Ross floats near cycle ergometer and Rack 9 Anthrorack (AR) (Human Physiology Laboratory) as German Payload Specialist 1 Ulrich Walter reviews a checklist in front of Rack 11 Experiment Rack. These experiment stations and the crewmembers are in the shirt-sleeve environment of the Spacelab Deutsche 2 (SL-D2) science module onboard the Earth-orbiting Columbia, Orbiter Vehicle (OV) 102. In the background is the SL-D2 aft end cone. Behind Ross and Walter is Rack 12 Experiment Rack with Baroreflex (BA).

Using Paraffin with -10 deg C to 10 deg C Melting Point for Payload Thermal Energy Storage in SpaceX Dragon Trunk

Science.gov (United States)

Choi, Michael K.

2013-01-01

A concept of using paraffin wax phase change material (PCM) with a melting point between -10 deg C and 10 deg C for payload thermal energy storage in a Space Exploration Technologies (SpaceX) Dragon trunk is presented. It overcomes the problem of limited heater power available to a payload with significant radiators when the Dragon is berthed to the International Space Station (ISS). It stores adequate thermal energy to keep a payload warm without power for 6 hours during the transfer from the Dragon to an ExPRESS logistics carrier (ELC) on the ISS.

Draamaviisik anno 2004 / Piret Kruuspere

Index Scriptorium Estoniae

Kruuspere, Piret, 1961-

2005-01-01

2004. a. pärjatuks peetavate eelvalikusse on jõudnud viie mehe - U. Lennuki, U. Vadi, M. Kivastiku, M. Muti ja M. Kõivu näidendid : "Boob teab", "Kohtume trompetis", "Külmetava kunstniku portree", "Kõik roosid ma kingiksin" ja "Finis nihili"

Vaheta vanaema suvepiiga vastu - üllatushinnad! / Tiia Penjam

Index Scriptorium Estoniae

Penjam, Tiia, 1955-

2009-01-01

Vastukaja artiklile: Laisk, Mart. Dehumaniseeritud koolisüsteem. Postimees, 27.05.2009. Samas ka kultuuritusest ja lahmivast halvustamisest omakasupüüdlikel ajenditel TEA kirjastuse koduleheküljel. Samas ka Urmas Vadi luuletus "Vahetus", mis ilmus 28. mai "EE Areenis"

Navigation and Remote Sensing Payloads and Methods of the Sarvant Unmanned Aerial System

Science.gov (United States)

Molina, P.; Fortuny, P.; Colomina, I.; Remy, M.; Macedo, K. A. C.; Zúnigo, Y. R. C.; Vaz, E.; Luebeck, D.; Moreira, J.; Blázquez, M.

2013-08-01

In a large number of scenarios and missions, the technical, operational and economical advantages of UAS-based photogrammetry and remote sensing over traditional airborne and satellite platforms are apparent. Airborne Synthetic Aperture Radar (SAR) or combined optical/SAR operation in remote areas might be a case of a typical "dull, dirty, dangerous" mission suitable for unmanned operation - in harsh environments such as for example rain forest areas in Brazil, topographic mapping of small to medium sparsely inhabited remote areas with UAS-based photogrammetry and remote sensing seems to be a reasonable paradigm. An example of such a system is the SARVANT platform, a fixed-wing aerial vehicle with a six-meter wingspan and a maximumtake- of-weight of 140 kilograms, able to carry a fifty-kilogram payload. SARVANT includes a multi-band (X and P) interferometric SAR payload, as the P-band enables the topographic mapping of densely tree-covered areas, providing terrain profile information. Moreover, the combination of X- and P-band measurements can be used to extract biomass estimations. Finally, long-term plan entails to incorporate surveying capabilities also at optical bands and deliver real-time imagery to a control station. This paper focuses on the remote-sensing concept in SARVANT, composed by the aforementioned SAR sensor and envisioning a double optical camera configuration to cover the visible and the near-infrared spectrum. The flexibility on the optical payload election, ranging from professional, medium-format cameras to mass-market, small-format cameras, is discussed as a driver in the SARVANT development. The paper also focuses on the navigation and orientation payloads, including the sensors (IMU and GNSS), the measurement acquisition system and the proposed navigation and orientation methods. The latter includes the Fast AT procedure, which performs close to traditional Integrated Sensor Orientation (ISO) and better than Direct Sensor Orientation (Di

MALAYSIA'S POST-9/11 SECURITY STRATEGY: WINNING "HEARTS AND MINDS" OR LEGITIMISING THE POLITICAL STATUS QUO?

Directory of Open Access Journals (Sweden)

Andrew Humphreys

2010-01-01

Full Text Available Since the Emergency, the Malaysian government has maintained a security policy which somewhat paradoxically combines the use ofcoercive, repressive legislation with a "hearts and minds" ideology.Following 9/11, I argue that the government has adapted this "heartsand minds" approach to the so-called War on Terror. The BarisanNasional governments of Mahathir Mohamad and Abdullah Badawi bothformulated ideological strategies designed to undermine the ideological strength of al-Qaeda and establish Malaysia as a leader of the Muslim world. Mahathir and Abdullah hinged their ideological approach on a state-constructed form of Islam and sought to portray Malaysia as a tolerant and moderate Muslim country. However, it will be shown that the use of ideology in Malaysia is often calibrated to ensure regime security rather than national security. The Malaysian government has used its ideology to promote elite interests and limit the discursive space for alternative and opposing viewpoints. Significantly, ideology has been used to justify crackdowns against genuine political opponents and to legitimise the political status quo.

STS-76 Payload Cmdr Ronald Sega suits up

Science.gov (United States)

1996-01-01

STS-76 Payload Commander Ronald M. Sega is donning his launch/entry suit in the Operations and Checkout Building with assistance from a suit technician. The third docking between the Russian Space Station Mir and the U.S. Space Shuttle marks the second trip into space for Sega, who recently served a five-month assignment in Russia as operations director for NASA activities there. Once suitup activities are completed the six-member STS-76 flight crew will depart for Launch Pad 39B, where the Space Shuttle Atlantis is undergoing final preparations for liftoff during an approximately seven-minute launch window opening around 3:13 a.m. EST, March 22.

The astronomy spacelab payloads study: executive volume. Interim report

International Nuclear Information System (INIS)

1975-07-01

The progress of the Astronomy Spacelab Payloads Project at the Goddard Space Flight Center is reported. Astronomical research in space, using the Spacelab in conjunction with the Space Shuttle, is described. The various fields of solar astronomy or solar physics, ultraviolet and optical astronomy, and high energy astrophysics are among the topics discussed. These fields include scientific studies of the Sun and its dynamical processes, of the stars in wavelength regions not accessible to ground based observations, and the exciting new fields of X-ray, gamma ray, and particle astronomy

Quo vadis GRI? A (critical) assessment of GRI 3.1 A+ non-financial reports and implications for credibility and standardization

OpenAIRE

Knebel Sebastian; Seele Peter

2015-01-01

Purpose – The purpose of this paper is to examine the status of non financial reporting according to the Global Reporting Initiative (GRI) 3.1 A+ standard. By examining the comprehensiveness of the GRI performance in corporate non financial reports classified as A+ the authors challenge the external assurance system imposed by GRI 3.1 A+ and discuss future directions for the application of GRI 4.0 particularly with regard to the standardized corporate reporting software language XBRL. Des...

Quo vadis Banco Mundial?. El Estado y el desarrollo en la agenda y discursos del organismo desde la mirada latinoamericana

Directory of Open Access Journals (Sweden)

Víctor Ramiro Fernández

2006-01-01

Full Text Available El artículo analiza el papel asignado por el Banco Mundial al Estado en la motorización de los procesos de desarrollo en la última década y media. Para ello estructuramos el trabajo en cuatro partes: en la primera, y siguiendo los documentos del BM de inicios de la primera mitad “larga” de la década del 90 (1990/97, exploramos cómo se construyó y cuáles fueron las características de la plataforma conceptual que dio inicio a las reformas mercantilizadoras y al tratamiento marginalizador del Estado en la motorización del desarrollo. Exploramos luego, en la segunda parte, el aparente “giro estatista” del BM (1997, tratando de dar cuenta de cómo la recuperación del Estado – que hace el organismo – y la insistencia en sus capacidades como instrumento de desarrollo no parecen revertir sino, funcionalizar la plataforma – neoliberal – consolidada desde inicios de la década. En la tercera parte, y como constitutivo de un segundo período que alcanza la última parte de la década del 90 y continúa hasta nuestros días, analizamos el más reciente ingreso dentro de la agenda del BM de un cuerpo teórico institucionalista que, sosteniendo las “reformas de segunda generación” impulsadas por el mismo BM, ha colocado al Estado como una institución más, anulando su especificidad estratégica como actor motorizador del desarrollo. En la cuarta parte concluimos con una revisión y articulación de los aspectos antes indicados, destacando cómo el difuso y zigzagueante recorrido dado por el BM al Estado manifiesta una clara continuidad centrada en la defensa de los postulados neoliberales defendidos a inicios de la década y – producto de ello – un permanente desplazamiento del Estado de las áreas productivo industriales. Resaltamos la manera en que esto último incomoda al organismo frente a los resultados históricos mostrados por los países que no siguieron sus recomendaciones ni programas, así como ante las demandas crecientes – claramente visualizables en América latina – de contar con un Estado activo y motorizador del desarrollo económico, capaz de compatibilizar el crecimiento interno y la cohesión social con la inserción en el mercado internacional. Se argumenta, finalmente, acerca del desafío que pesa sobre las sociedades latinoamericanas para enfrentar un camino de desarrollo autónomo que – más allá de los planteos de los organismos financieros, como el BM, y atendiendo a las limitaciones que parecen pesar sobre éstos para desarrollar una redefinición estructural de su agenda – se cimiente sobre una estatidad altamente enraizada y cualificada para dar respuestas a las demandas antes mencionadas.

Uljas ja uudishimulik 20-aastane / Madli Pesti

Index Scriptorium Estoniae

Pesti, Madli, 1980-

2007-01-01

VAT Teatri lavastustest - Amélie Nothombi romaani järgi "Vaenlase kosmeetika" (lav. Peeter Raudsepp), Kristof Magnussoni "Meeste varjupaik" (lav. Christian Römer), Hans Christian Anderseni järgi "Merineitsi" (lav. Aare Toikka) ja Urmas Vadi "Elvis oli kapis" (lav. Aare Toikka)

In-band 16-QAM and multi-carrier SCM modulation to label DPSK payload signals for IP packet routing.

Science.gov (United States)

Tafur Monroy, Idelfonso; Vegas Olmos, Juan; Garcia Larrode, Maria; Koonen, Ton; Díaz Jiménez, Cristina

2006-02-06

We present an experimental demonstration of the feasibility of in-band subcarrier multiplexing (SCM) for labeling of differential phase shift keying (DPSK) payload signals. We show that by proper selection of the value of the subcarrier frequency the effect of the superimposed SCM label on the performance of the DPSK signal is minimized. Furthermore, we show experimentally the advantages of using alternative modulation formats such as 16-QAM and multi-carrier SCM for optical labeling of a 10 Gb/s DPSK payload signal.

Exomars 2018 Rover Pasteur Payload Sample Analysis

Science.gov (United States)

Debus, Andre; Bacher, M.; Ball, A.; Barcos, O.; Bethge, B.; Gaubert, F.; Haldemann, A.; Kminek, G.; Lindner, R.; Pacros, A.; Rohr, T.; Trautner, R.; Vago, J.

The ExoMars programme is a joint ESA-NASA program having exobiology as one of the key science objectives. It is divided into 2 missions: the first mission is ESA-led with an ESA orbiter and an ESA Entry, Descent and Landing (EDL) demonstrator, launched in 2016 by NASA, and the second mission is NASA-led, launched in 2018 by NASA including an ESA rover and a NASA rover both deployed by a single NASA EDL system. For ESA, the ExoMars programme will demonstrate key flight and in situ enabling technologies in support of the European ambitions for future exploration missions, as outlined in the Aurora Declaration. The ExoMars 2018 ESA Rover will carry a comprehensive and coherent suite of analytical instruments dedicated to exobiology and geology research: the Pasteur Payload (PPL). This payload includes a selection of complementary instruments, having the following goals: to search for signs of past and present life on Mars and to investigate the water/geochemical environment as a function of depth in the shallow subsurface. The ExoMars Rover will travel several kilometres searching for sites warranting further investigation. The Rover includes a drill and a Sample Preparation and Distribution System which will be used to collect and analyse samples from within outcrops and from the subsurface. The Rover systems and instruments, in particular those located inside the Analytical Laboratory Drawer must meet many stringent requirements to be compatible with exobiologic investigations: the samples must be maintained in a cold and uncontaminated environment, requiring sterile and ultraclean preparation of the instruments, to preserve volatile materials and to avoid false positive results. The value of the coordinated observations suggests that a significant return on investment is to be expected from this complex development. We will present the challenges facing the ExoMars PPL, and the plans for sending a robust exobiology laboratory to Mars in 2018.

Nonprofit, payload process improvement through lean management

Science.gov (United States)

Sampson, Melissa

Organizations that are successful and competitive long-term have learned to efficiently utilize their resources, such as money, people, facilities, and time. Over the last half-century, there have been a variety of theories and techniques put forth on how to do this. One recent theory applied in the aerospace industry is Lean Management (LM), which emphasizes a customer focus and a rigorous elimination of activities that do not add value from the customer's perspective. LM has not, until now, been evaluated for small, nonprofit, one-off production organizations (NOPOs). Previous research on LM focused on for-profit companies and large-scale production organizations, producing relatively similar products repetitively (e.g. automobiles, commercial satellites, aircraft, and launch vehicles). One-off production organizations typically create one-of-a-kind products. The purpose of this research is to examine the applicability of LM to a NOPO. LM will improve resource utilization and thereby competitiveness, as well as exploring a new area of knowledge and research. The research methodology consists of conducting case studies, formal and informal interviews, observation and analysis in order to assess whether and how LM may be beneficial. The research focuses on one particular NOPO, BioServe Space Technologies (BST): a nonprofit, payload development organization. Additional NOPOs were interviewed in order to draw more generalized conclusions about LM benefits. The research demonstrates that LM is applicable to NOPOs, thus providing a tool to improve efficiency and competitiveness. Results from this research are guidelines for payload development organizations to implement LM, and highlighting potential LM weaknesses. A major conclusion is that LM needs some minor modifications to be applicable and useful to NOPOs, particularly in terms of value stream mapping. The LM implementation roadmap developed for NOPOs introduces customized metrics, as well as including standard

STS-40 Spacelab Life Science 1 (SLS-1) module in OV-102's payload bay (PLB)

Science.gov (United States)

1991-01-01

STS-40 Spacelab Life Science 1 (SLS-1) module is documented in the payload bay (PLB) of Columbia, Orbiter Vehicle (OV) 102. Included in the view are: the spacelab (SL) transfer tunnel joggle section and support struts; SLS-1 module forward end cone with the European Space Agency (ESA) SL insignia, SLS-1 payload insignia, and the upper feed through plate (center); the orbiter maneuvering system (OMS) pods; and the vertical stabilizer with the Detailed Test Objective (DTO) 901 Shuttle Infrared Leeside Temperature Sensing (SILTS) at the top 24 inches. The vertical stabilizer points to the Earth's limb and the cloud-covered surface of the Earth below.

Smartphone qualification & linux-based tools for CubeSat computing payloads

Science.gov (United States)

Bridges, C. P.; Yeomans, B.; Iacopino, C.; Frame, T. E.; Schofield, A.; Kenyon, S.; Sweeting, M. N.

Modern computers are now far in advance of satellite systems and leveraging of these technologies for space applications could lead to cheaper and more capable spacecraft. Together with NASA AMES's PhoneSat, the STRaND-1 nanosatellite team has been developing and designing new ways to include smart-phone technologies to the popular CubeSat platform whilst mitigating numerous risks. Surrey Space Centre (SSC) and Surrey Satellite Technology Ltd. (SSTL) have led in qualifying state-of-the-art COTS technologies and capabilities - contributing to numerous low-cost satellite missions. The focus of this paper is to answer if 1) modern smart-phone software is compatible for fast and low-cost development as required by CubeSats, and 2) if the components utilised are robust to the space environment. The STRaND-1 smart-phone payload software explored in this paper is united using various open-source Linux tools and generic interfaces found in terrestrial systems. A major result from our developments is that many existing software and hardware processes are more than sufficient to provide autonomous and operational payload object-to-object and file-based management solutions. The paper will provide methodologies on the software chains and tools used for the STRaND-1 smartphone computing platform, the hardware built with space qualification results (thermal, thermal vacuum, and TID radiation), and how they can be implemented in future missions.

Mental Workload and Performance Experiment (MWPE) Team in the Spacelab Payload Operations Control

Science.gov (United States)

1992-01-01

The primary payload for Space Shuttle Mission STS-42, launched January 22, 1992, was the International Microgravity Laboratory-1 (IML-1), a pressurized manned Spacelab module. The goal of IML-1 was to explore in depth the complex effects of weightlessness of living organisms and materials processing. Around-the-clock research was performed on the human nervous system's adaptation to low gravity and effects of microgravity on other life forms such as shrimp eggs, lentil seedlings, fruit fly eggs, and bacteria. Materials processing experiments were also conducted, including crystal growth from a variety of substances such as enzymes, mercury iodide, and a virus. The Huntsville Operations Support Center (HOSC) Spacelab Payload Operations Control Center (SL POCC) at the Marshall Space Flight Center (MSFC) was the air/ground communication channel used between the astronauts and ground control teams during the Spacelab missions. Featured is the Mental Workload and Performance Experiment (MWPE) team in the SL POCC) during STS-42, IML-1 mission.

Building on the Past - Looking to the Future: A Focus on Payload Safety

Science.gov (United States)

Nash, Sally K.; Rehm, Raymond B.; Samtoagp. Darren M.; Wong, Teresa K.; Wolf, Scott L.

2008-01-01

The history of the space industry stretches far and above lunar landings to the construction of the International Space Station. For years, humans have sought to understand the nature of the universe. As society grows in knowledge and curiosity of space, the focus of maintaining the safety of the crew and vehicle habitability is of utmost importance to the National Aeronautics and Space Administration (NASA) community. Through the years, Payload Safety has developed not only as a Panel, but also as part of the NASA community, striving to enhance the efficiency and understanding of how business should be conducted as more International Partners become involved. This is the first in a series of papers and presentations in what is hoped to be an annual update that provides continuous challenges and lessons learned in the areas of communication, safety requirements and processes and other areas which have been vital to the Payload Safety Review Panel (PSRP).

On-board Payload Data Processing from Earth to Space Segment

Science.gov (United States)

Tragni, M.; Abbattista, C.; Amoruso, L.; Cinquepalmi, L.; Bgongiari, F.; Errico, W.

2013-09-01

Matching the users application requirements with the more and more huge data streaming of the satellite missions is becoming very complex. But we need both of them. To face both the data management (memory availability) and their transmission (band availability) many recent R&D activities are studying the right way to move the data processing from the ground segment to the space segment by the development of the so-called On-board Payload Data Processing (OPDP). The space designer are trying to find new strategies to increase the on board computation capacity and its viability to overcome such limitations, memory and band, focusing the transmission of remote sensing information (not only data) towards their final use. Some typical applications which can benefit of the on board payload data processing include the automatic control of a satellites constellation which can modify its scheduled acquisitions directly on-board and according to the information extracted from the just acquired data, increasing, for example, the capability of monitoring a specific objective (such as oil spills, illegal traffic) with a greater versatility than a traditional ground segment workflow. The authors and their companies can count on a sound experience in design and development of open, modular and compact on-board processing systems. Actually they are involved in a program, the Space Payload Data Processing (SpacePDP) whose main objective is to develop an hardware and a software framework able to perform both the space mission standard tasks (sensors control, mass storage devices management, uplink and downlink) and the specific tasks required by each mission. SpacePDP is an Open and modular Payload Data Processing system, composed of Hardware and Software modules included a SDK. The whole system is characterised by flexible and customizable building blocks that form the system architectures and by a very easy way to be integrated in the missions by the SDK (a development

A new orthogonal labeling scheme based on a 40-Gb/s DPSK payload and a 2.5-Gb/s PolSK label

DEFF Research Database (Denmark)

Xu, Lin; Chi, Nan; Oxenløwe, Leif Katsuo

2005-01-01

In this letter, we propose and experimentally demonstrate a new orthogonal labeling scheme based on a 40-Gb/s differential phase-shift keying payload and a 2.5-Gb/s polarization-shift keying label, which entirely eliminates the modulation crosstalk between the payload and label and shows negligible...

Monument protection and energy conservation. Status quo five years after the EnEV 2007; Denkmalschutz und Energieeinsparung. Stand der Dinge fuenf Jahre nach der EnEV 2007

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-11-01

The meeting ''Monument conservation and energy conservation'' at 9th February 2012 in Wiesbaden (Federal Republic of Germany) focuses on the status quo five years after the revised version of the Energy Saving Ordinance (EnEV) in the year 2007. Within this meeting the following lectures were held: (1) Monument conservation and energy conservation - Status Quo five years after the EnEV 2007 (Roswitha Kaiser); (2) Interior insulation with exterior hydrophic treatment - material appropriate and monument appropriate? (Anatol Worch, Michael Auras); (3) Hints regarding to planning, execution and quality assurance of a subsequent core insulation (Heinrich Wigger, Kerstin Stoelken, Britta Schreiber); (4) Comparison of different interior insulation materials (Rudolf Platte); (5) Urban structural energy study Winterthur (Reto Bieli); (6) Remodelling of an industrial plant protected as a historical monument - Historical window systems, exposed masonry and modern installations (Andr Kramm, Marcel Kremer); (7) Model project - Facade insulation with VIP panels at a Ernst-May building protected as a historical building in Frankfurt (Main) (Juergen Werner); (8) The former tax office Wiesbaden - Energetic strengthening (Klaus Daniels); (9) House of the Evangelical Church in Wiesbaden - Energetic strengthening of the facades (Dominik Loh); (10) Conservation versus comfort and energy demand - Potentials of optimization by means of a targeting controlled operation of plant-technical systems in a historical monument (Harald Garrecht); (11) Energy efficient construction - Compound insulation materials as a disposal problem for dismantling and renovation (Ulrich Langer, Thomas Egloffstein).

International Cooperation in the Field of International Space Station Payload Safety: Overcoming Differences and Working for Future

Science.gov (United States)

Nakamura, Yasuhiro; Ozawa, Masayuki; Takeyasu, Yoshioka; Griffith, Gerald; Goto, Katsuhito; Mitsui, Masami

2010-09-01

The importance of international cooperation among the International Space Station(ISS) Program participants is ever increasing as the ISS nears assembly complete. In the field of payload safety assurance, NASA and JAXA have enhanced their cooperation level. The authors describe the evolution of cooperation between the two agencies and the challenges encountered and overcame. NASA and JAXA have been working toward development of a NASA Payload Safety Review Panel(PSRP) franchise panel at JAXA for several years. When the JAXA Safety Review Panel(SRP) becomes a fully franchised panel of the NASA PSRP, the JAXA SRP will have the authority review and approve all JAXA ISS payloads operated on USOS and JEM, although NASA and JAXA joint reviews may be conducted as necessary. A NASA PSRP franchised panel at JAXA will streamline the conventional review process. Japanese payload organizations will not have to go through both JAXA and NASA payload safety reviews, while NASA will be relieved of a certain amount of review activities. The persistent efforts have recently born fruit. For the past two years, NASA and JAXA have increased emphasis on efforts to develop a NASA PSRP Franchised Panel at JAXA with concrete results. In 2009, NASA and JAXA signed Charter and Joint Development Plan. At the end of 2009, NASA PSRP transferred some review responsibility to the JAXA SRP under the franchising charter. Although JAXA had long history of reviewing payloads by their own panel prior to NASA PSRP reviews, it took several years for JAXA to receive NASA PSRP approval for delegation of franchised review authority to JAXA. This paper discusses challenges JAXA and NAXA faced. Considerations were required in developing a franchise at JAXA for history and experiences of the JAXA SRP as well as language and cultural differences. The JAXA panel, not only had its own well-established processes and supporting organizational structures which had some differences from its NASA PSRP counterparts

Quantitative bioanalysis of antibody-conjugated payload in monkey plasma using a hybrid immuno-capture LC-MS/MS approach: Assay development, validation, and a case study.

Science.gov (United States)

Liu, Ang; Kozhich, Alexander; Passmore, David; Gu, Huidong; Wong, Richard; Zambito, Frank; Rangan, Vangipuram S; Myler, Heather; Aubry, Anne-Françoise; Arnold, Mark E; Wang, Jian

2015-10-01

Antibody drug conjugates (ADCs) are complex molecules composed of two pharmacologically distinct components, the cytotoxic payload and the antibody. The measurement of the payload molecules that are attached to the antibody in vivo is important for the evaluation of the safety and efficacy of ADCs, and can also provide distinct information compared to the antibody-related analytes. However, analyzing the antibody-conjugated payload is challenging and in some cases may not be feasible. The in vivo change in drug antibody ratio (DAR), due to deconjugation, biotransformation or other clearance phenomena, generates unique and additional challenges for ADC analysis in biological samples. Here, we report a novel hybrid approach with immuno-capture of the ADC, payload cleavage by specific enzyme, and LC-MS/MS of the cleaved payload to quantitatively measure the concentration of payload molecules still attached to the antibody via linker in plasma. The ADC reference material used for the calibration curve is not likely to be identical to the ADC measured in study samples due to the change in DAR distribution over the PK time course. The assay clearly demonstrated that there was no bias in the measurement of antibody-conjugated payload for ADC with varying DAR, which thus allowed accurate quantification even when the DAR distribution dynamically changes in vivo. This hybrid assay was fully validated based on a combination of requirements for both chromatographic and ligand binding methods, and was successfully applied to support a GLP safety study in monkeys. Copyright © 2015 Elsevier B.V. All rights reserved.

A 3D CZT hard x-ray polarimeter for a balloon-borne payload

DEFF Research Database (Denmark)

Caroli, E.; Alvarez, J. M.; Auricchio, N.

2012-01-01

be optimized also for this type of measurement. In this framework, we present the concept of a small high-performance spectrometer designed for polarimetry between 100 and 1000 keV suitable as a stratospheric balloon-borne payload dedicated to perform an accurate and reliable measurement of the polarization...

Transitioning to Intel-based Linux Servers in the Payload Operations Integration Center

Science.gov (United States)

Guillebeau, P. L.

2004-01-01

The MSFC Payload Operations Integration Center (POIC) is the focal point for International Space Station (ISS) payload operations. The POIC contains the facilities, hardware, software and communication interface necessary to support payload operations. ISS ground system support for processing and display of real-time spacecraft and telemetry and command data has been operational for several years. The hardware components were reaching end of life and vendor costs were increasing while ISS budgets were becoming severely constrained. Therefore it has been necessary to migrate the Unix portions of our ground systems to commodity priced Intel-based Linux servers. hardware architecture including networks, data storage, and highly available resources. This paper will concentrate on the Linux migration implementation for the software portion of our ground system. The migration began with 3.5 million lines of code running on Unix platforms with separate servers for telemetry, command, Payload information management systems, web, system control, remote server interface and databases. The Intel-based system is scheduled to be available for initial operational use by August 2004 The overall migration to Intel-based Linux servers in the control center involves changes to the This paper will address the Linux migration study approach including the proof of concept, criticality of customer buy-in and importance of beginning with POSlX compliant code. It will focus on the development approach explaining the software lifecycle. Other aspects of development will be covered including phased implementation, interim milestones and metrics measurements and reporting mechanisms. This paper will also address the testing approach covering all levels of testing including development, development integration, IV&V, user beta testing and acceptance testing. Test results including performance numbers compared with Unix servers will be included. need for a smooth transition while maintaining

Mapping the space radiation environment in LEO orbit by the SATRAM Timepix payload on board the Proba-V satellite

Energy Technology Data Exchange (ETDEWEB)

Granja, Carlos, E-mail: carlos.granja@utef.cvut.cz; Polansky, Stepan

2016-07-07

Detailed spatial- and time-correlated maps of the space radiation environment in Low Earth Orbit (LEO) are produced by the spacecraft payload SATRAM operating in open space on board the Proba-V satellite from the European Space Agency (ESA). Equipped with the hybrid semiconductor pixel detector Timepix, the compact radiation monitor payload provides the composition and spectral characterization of the mixed radiation field with quantum-counting and imaging dosimetry sensitivity, energetic charged particle tracking, directionality and energy loss response in wide dynamic range in terms of particle types, dose rates and particle fluxes. With a polar orbit (sun synchronous, 98° inclination) at the altitude of 820 km the payload samples the space radiation field at LEO covering basically the whole planet. First results of long-period data evaluation in the form of time-and spatially-correlated maps of total dose rate (all particles) are given.

STS payloads mission control study. Volume 2-A, Task 1: Joint products and functions for preflight planning of flight operations, training and simulations

Science.gov (United States)

1976-01-01

Specific products and functions, and associated facility availability, applicable to preflight planning of flight operations were studied. Training and simulation activities involving joint participation of STS and payload operations organizations, are defined. The prelaunch activities required to prepare for the payload flight operations are emphasized.

Parameter design and experimental study of a bifunctional isolator for optical payload protection and stabilization

Science.gov (United States)

Wang, Guang-yuan; Guan, Xin; Cao, Dong-jing; Tang, Shao-fan; Chen, Xiang; Liang, Lu; Zheng, Gang-tie

2017-11-01

With the raise of resolution, optical payloads are becoming increasingly sensitive to satellite jitter. An approach where the entire spacecraft is pointed with great accuracy requires sophisticated and expensive bus design. In an effort to lower the overall cost of space missions that require highly stable line-of-sight pointing, a method of separating the bus and the payload with low frequency isolators is proposed. This isolation system can block the transmission of disturbance and allow relatively large bus motion. However, if the isolator is linear then there is a trade-off between isolation and static deflection as the launch and the on-orbit stage have difference requirements on the isolation frequency. Otherwise, an extra locking system should be appended to protect the payload before getting into orbit, as the STABLE isolation system[1] and the MIM isolation system[2] did. To overcome this limitation, an alternative approach is to design a nonlinear isolator with high-static stiffness during launch and low dynamic stiffness on orbit. Several specially designed nonlinear isolators have achieved low dynamic stiffness with large static load capacity. Virgin[3] considered a structure made from a highly deformed elastic element to achieve a softening spring. Platus[4] exploited the buckling of beams under axial load in a specific configuration to achieve a negative stiffness in combination with a positive stiffness, and hence low-dynamic stiffness. Others have achieved the same by connecting linear springs with positive stiffness in parallel with elements of negative stiffness[5] [7]. In the present study, a bifunctional isolator has been developed for optical payloads. The isolator have good performance both during launch and on orbit because of its specially designed nonlinear stiffness and damping. The isolator works in a linear part with low stiffness and small damping ratio under the micro-vibration and microgravity on orbit. The transmissibility

Studies of the system-environment interaction by electron-beam emission from a sounding rocket payload in the ionosphere

International Nuclear Information System (INIS)

Myers, N.B.

1989-01-01

The CHARGE-2 sounding rocket payload was designed to measure the transient and steady-state electrical charging of a space vehicle a low-Earth-orbit altitudes during the emission of a low-power electron beam from the vehicle. In addition to the electron gun, the payload contained several diagnostics to monitor plasma and waves resulting from the beam/space/vehicle interaction. The payload was separated into two sections, the larger section carried a 1-keV electron gun and was referred to as the mother vehicle. The smaller section, referred to as the daughter, was connected to the mother by an insulated, conducting tether and was deployed to a distance of up to 426 m across the geomagnetic field. Payload stabilization was obtained using thrusters that released cold nitrogen gas. In addition to performing electron beam experiments, the mother vehicle contained a high-voltage power supply capable of applying up to +450 V and 28 mA to the daughter through the tether. The 1-keV electron beam was generated at beam currents of 1 mA to 48 mA, measured at the exit aperture of the electron gun. Steady-state potentials of up to 560 V were measured for the mother vehicle. The daughter attained potentials of up to 1,000 V relative to the background ionosphere and collected currents up to 6.5 mA. Thruster firings increased the current collection to the vehicle firing the thrusters and resulted in neutralization of the payload. The CHARGE-2 experiment was unique in that for the first time a comparison was made of the current collection between an electron beam-emitting vehicle and a non-emitting vehicle at high potential (400 V to 1,000 V). The daughter current collection agreed well with the Parker-Murphy model, while the mother current collection always exceeded the Parker-Murphy limit and even exceeded the Langmuir-Blodgett predicted current below 240 km

Using Paraffin PCM to Make Optical Communication Type of Payloads Thermally Self-Sufficient for Operation in Orion Crew Module

Science.gov (United States)

Choi, Michael K.

2016-01-01

An innovative concept of using paraffin phase change material with a melting point of 28 C to make Optical Communication type of payload thermally self-sufficient for operation in the Orion Crew Module is presented. It stores the waste heat of the payload and permits it to operate for about one hour by maintaining its temperature within the maximum operating limit. It overcomes the problem of relying on the availability of cold plate heat sink in the Orion Crew Module.

Design, Simulation, Software Development, and Testing of a Compact Aircraft Tracking Payload for the CanX-7 Nanosatellite Mission

Science.gov (United States)

Bennett, Ian Graham

Automatic Dependent Surveillance-Broadcast (ADS-B) is quickly becoming the new standard for more efficient air traffic control, but as a satellite/ground-based hybrid system it faces limitations on its usefulness over oceans and remote areas. Tracking of aircraft from space presents many challenges that if overcome will greatly increase the safety and efficiency of commercial air travel in these areas. This thesis presents work performed to develop a flight-ready ADS-B receiver payload for the CanX-7 technology demonstration satellite. Work presented includes a simulation of payload performance and coverage area, the design and testing of a single-feed circularly polarized L-band antenna, the design of software to control the payload and manage its data, and verification of the performance of the hardware prior to integration with the satellite and launch. Also included is a short overview of results from the seven-month aircraft tracking campaign conducted with the spacecraft.

Creative thinking in prospective teachers: the status quo and the impact of contextual factors

Directory of Open Access Journals (Sweden)

Hannetjie Meintjes

2010-01-01

Full Text Available To create unique and appropriate learning opportunities and environments and to nurture the development of creative thinking abilities among learners are some of the demands for creative thinking currently expected of teachers globally and also in South Africa. Creative thinking in academic context assumes, among other things, the ability to generate a variety of original ideas, to see different viewpoints and elaborate on ideas. We report on the findings of a quantitative pilot investigation by means of experimental research utilizing an ex post facto design to determine the status quo regarding the creative thinking abilities of a hetrogeneous group of 207 pre-service teachers studying at a South African university, using the Abbreviated Torrance Test for Adults (ATTA and a Partial Least Squares (PLS exploration into the relationship between contextual factors and the students' creative thinking abilities. Strong correlations were found among a variety of contextual factors such as the type of school model and culture and creative thinking abilities and also between specific contextual factors such as the choice of role model and socio economic and acculturation factors and certain creative thinking abilities. This research explores a largely unknown field, namely, the creative thinking abilities of a group of South African pre-service teachers of different cultural groups and creates an awareness of the need for the development of creative thinking abilities among these prospective teachers.

Packaging related properties of commercially available biopolymers – An overview of the status quo

Directory of Open Access Journals (Sweden)

V. Jost

2018-05-01

Full Text Available Several commercially available thermoplastic biopolymers were processed in a continuous extrusion line. The molecular weight, crystallinity, and mechanical and permeation properties of the cast films were determined in order to evaluate the status quo of biopolymers currently commercially available. The biopolymers that were evaluated were polylactic acid (PLA, several polyhydroxyalkanoates (PHAs (Poly(3-hydroxybutyrate (PHB, poly(3-hydroxybutyrate-co-4-hydroxybutyrate (PHBHB, poly(3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV, thermoplastic starch (TPS, polybutylene adipate terephthalate (PBAT, polybutylene succinate (PBS, polycaprolactone (PCL and biobased polyethylene (BioPE. Due to its potential for biobased production, thermoplastic polyurethane elastomer (TPU was also analysed. Mechanical analysis showed the PLA and PHA films had high strength and extremely low elongation at break. These were also the materials with the highest molecular weights. Films made of TPU, PCL, TPS, PBAT and BioPE had a significantly lower Young’s modulus and significantly higher elongation at break; these films had comparatively low molecular weights. Permeation measurements showed that PHA films, and particularly PHBV, had the lowest oxygen and water vapour permeability of the biopolymers that were analysed. The biopolymers BioPE, TPS, PCL, TPU and PBAT were highly permeable to oxygen, and had comparatively low molecular weight. The biopolymers TPU, PBS, PBAT, PCL and TPS were highly permeable to water vapour.

Space Launch System Spacecraft and Payload Elements: Progress Toward Crewed Launch and Beyond

Science.gov (United States)

Schorr, Andrew A.; Smith, David Alan; Holcomb, Shawn; Hitt, David

2017-01-01

While significant and substantial progress continues to be accomplished toward readying the Space Launch System (SLS) rocket for its first test flight, work is already underway on preparations for the second flight - using an upgraded version of the vehicle - and beyond. Designed to support human missions into deep space, SLS is the most powerful human-rated launch vehicle the United States has ever undertaken, and is one of three programs being managed by the National Aeronautics and Space Administration's (NASA's) Exploration Systems Development division. The Orion spacecraft program is developing a new crew vehicle that will support human missions beyond low Earth orbit (LEO), and the Ground Systems Development and Operations (GSDO) program is transforming Kennedy Space Center (KSC) into a next-generation spaceport capable of supporting not only SLS but also multiple commercial users. Together, these systems will support human exploration missions into the proving ground of cislunar space and ultimately to Mars. For its first flight, SLS will deliver a near-term heavy-lift capability for the nation with its 70-metric-ton (t) Block 1 configuration. Each element of the vehicle now has flight hardware in production in support of the initial flight of the SLS, which will propel Orion around the moon and back. Encompassing hardware qualification, structural testing to validate hardware compliance and analytical modeling, progress is on track to meet the initial targeted launch date. In Utah and Mississippi, booster and engine testing are verifying upgrades made to proven shuttle hardware. At Michoud Assembly Facility (MAF) in Louisiana, the world's largest spacecraft welding tool is producing tanks for the SLS core stage. Providing the Orion crew capsule/launch vehicle interface and in-space propulsion via a cryogenic upper stage, the Spacecraft/Payload Integration and Evolution (SPIE) element serves a key role in achieving SLS goals and objectives. The SPIE element

From LPF to eLISA: new approach in payload software

Science.gov (United States)

Gesa, Ll.; Martin, V.; Conchillo, A.; Ortega, J. A.; Mateos, I.; Torrents, A.; Lopez-Zaragoza, J. P.; Rivas, F.; Lloro, I.; Nofrarias, M.; Sopuerta, CF.

2017-05-01

eLISA will be the first observatory in space to explore the Gravitational Universe. It will gather revolutionary information about the dark universe. This implies a robust and reliable embedded control software and hardware working together. With the lessons learnt with the LISA Pathfinder payload software as baseline, we will introduce in this short article the key concepts and new approaches that our group is working on in terms of software: multiprocessor, self-modifying-code strategies, 100% hardware and software monitoring, embedded scripting, Time and Space Partition among others.

An Undergraduate Student Instrumentation Project (USIP) to Develop New Instrument Technology to Study the Auroral Ionosphere and Stratospheric Ozone Layer Using Ultralight Balloon Payloads

Science.gov (United States)

Nowling, M.; Ahmad, H.; Gamblin, R.; Guala, D.; Hermosillo, D.; Pina, M.; Marrero, E.; Canales, D. R. J.; Cao, J.; Ehteshami, A.; Bering, E. A., III; Lefer, B. L.; Dunbar, B.; Bias, C.; Shahid, S.

2015-12-01

This project is currently engaging twelve undergraduate students in the process of developing new technology and instrumentation for use in balloon borne geospace investigations in the auroral zone. Motivation stems from advances in microelectronics and consumer electronic technology. Given the technological innovations over the past 20 years it now possible to develop new instrumentation to study the auroral ionosphere and stratospheric ozone layer using ultralight balloon payloads for less than 6lbs and $3K per payload. The University of Houston Undergraduate Student Instrumentation Project (USIP) team has built ten such payloads for launch using 1500 gm latex weather balloons deployed in Houston, TX, Fairbanks, AK, and as well as zero pressure balloons launched from northern Sweden. The latex balloon project will collect vertical profiles of wind velocity, temperature, electrical conductivity, ozone, and odd nitrogen. This instrument payload will also produce profiles of pressure, electric field, and air-earth electric current. The zero pressure balloons will obtain a suite of geophysical measurements including: DC electric field, electric field and magnetic flux, optical imaging, total electron content of ionosphere via dual-channel GPS, X-ray detection, and infrared/UV spectroscopy. Students flew payloads with different combinations of these instruments to determine which packages are successful. Data collected by these instruments will be useful in understanding the nature of electrodynamic coupling in the upper atmosphere and how the global earth system is changing. Twelve out of the launched fifteen payloads were successfully launched and recovered. Results and best practices learned from lab tests and initial Houston test flights will be discussed.

Space Situational Awareness of Large Numbers of Payloads From a Single Deployment

Science.gov (United States)

Segerman, A.; Byers, J.; Emmert, J.; Nicholas, A.

2014-09-01

The nearly simultaneous deployment of a large number of payloads from a single vehicle presents a new challenge for space object catalog maintenance and space situational awareness (SSA). Following two cubesat deployments last November, it took five weeks to catalog the resulting 64 orbits. The upcoming Kicksat mission will present an even greater SSA challenge, with its deployment of 128 chip-sized picosats. Although all of these deployments are in short-lived orbits, future deployments will inevitably occur at higher altitudes, with a longer term threat of collision with active spacecraft. With such deployments, individual scientific payload operators require rapid precise knowledge of their satellites' locations. Following the first November launch, the cataloguing did not initially associate a payload with each orbit, leaving this to the satellite operators. For short duration missions, the time required to identify an experiment's specific orbit may easily be a large fraction of the spacecraft's lifetime. For a Kicksat-type deployment, present tracking cannot collect enough observations to catalog each small object. The current approach is to treat the chip cloud as a single catalog object. However, the cloud dissipates into multiple subclouds and, ultimately, tiny groups of untrackable chips. One response to this challenge may be to mandate installation of a transponder on each spacecraft. Directional transponder transmission detections could be used as angle observations for orbit cataloguing. Of course, such an approach would only be employable with cooperative spacecraft. In other cases, a probabilistic association approach may be useful, with the goal being to establish the probability of an element being at a given point in space. This would permit more reliable assessment of the probability of collision of active spacecraft with any cloud element. This paper surveys the cataloguing challenges presented by large scale deployments of small spacecraft

Application of World Wide Web (W3) Technologies in Payload Operations

Science.gov (United States)

Sun, Charles; Windrem, May; Picinich, Lou

1996-01-01

World Wide Web (W3) technologies are considered in relation to their application to space missions. It is considered that such technologies, including the hypertext transfer protocol and the Java object-oriented language, offer a powerful and relatively inexpensive framework for distributed application software development. The suitability of these technologies for payload monitoring systems development is discussed, and the experience gained from the development of an insect habitat monitoring system based on W3 technologies is reported.

An estimate of the outgassing of space payloads, their internal pressures, contaminations and gaseous influences on the environment

Science.gov (United States)

Scialdone, J. J.

1985-01-01

Experimentally measured outgassing as a function of time is presented for 14 space systems including several spacecraft instruments, spacecraft, the shuttle bay, and a spent solid fuel motor. The weights, volumes, and some of the scientific functions of the instruments involved are indicated. The methods used to obtain the data are briefly described. General indications on how to use the data to obtain the internal pressure versus time for a payload, its self-contamination, the gaseous flow in its vicinity, the column densities in its field of view, and other environmental parameters which are dependent on the outgassing of a payload are provided.

EELV Secondary Payload Adapter (ESPA)

Science.gov (United States)

Haskett, Scott A.; Weis, Steven C.; Doggrell, Leslie J.; Sciulli, Dino; Meink, Troy E.; Ganley, Jeff T.; Maly, Joseph R.; Jurisson, Karl

2000-11-01

Despite growing international interest in small satellites, high dedicated expendable launch vehicle costs and the lack of secondary launch opportunities continue to hinder the full exploitation of small satellite technology. In the United States, the Department of Defense (DoD), NASA, other government agencies, commercial companies, and many universities use small satellites to perform space experiments, demonstrate new technology, and test operational prototype hardware. In addition, the DoD continues to study the role of small satellites in fulfilling operational mission requirements. However, the US lacks sufficient small satellite launch capacity. Furthermore, US government agencies are restricted to the use of US launch vehicles, which eliminates many affordable launch opportunities. In an effort to increase the number of space experiments that can be flown with a small, fixed budget, the DoD Space Test Program (STP) has teamed with the Air Force Research Laboratory Space Vehicles Directorate (AFRL/VS) to develop a low-cost solution for the small satellite launch program. Our solution, which can be implemented on both Boeing and Lockheed-Martin Evolved Expendable Launch Vehicle-Medium (EELV-M) boosters, is called the EELV Secondary Payload Adaptor (ESPA). ESPA will increase the number of launch opportunities for 180kg-class (or smaller) satellites at prices highly competitive with other secondary launch services worldwide.

Technology Disruptions in Future Communication Payloads (Technologies de rupture pour futures charges utiles de telecommunications)

National Research Council Canada - National Science Library

Gayrard, Jean-Didier

2005-01-01

...: gigantism, adaptation, or modularity. Any of these ways will require satellite payloads to evolve from present levels of complexity that are mainly suited for TV broadcasting and telephone trunking in the Ku and C bands, to a new...

Gravity Plant Physiology Facility (GPPF) Team in the Spacelab Payload Operations Control Center (SL

Science.gov (United States)

1992-01-01

The primary payload for Space Shuttle Mission STS-42, launched January 22, 1992, was the International Microgravity Laboratory-1 (IML-1), a pressurized manned Spacelab module. The goal of IML-1 was to explore in depth the complex effects of weightlessness of living organisms and materials processing. Around-the-clock research was performed on the human nervous system's adaptation to low gravity and effects of microgravity on other life forms such as shrimp eggs, lentil seedlings, fruit fly eggs, and bacteria. Materials processing experiments were also conducted, including crystal growth from a variety of substances such as enzymes, mercury iodide, and a virus. The Huntsville Operations Support Center (HOSC) Spacelab Payload Operations Control Center (SL POCC) at the Marshall Space Flight Center (MSFC) was the air/ground communication channel used between the astronauts and ground control teams during the Spacelab missions. Featured is the Gravity Plant Physiology Facility (GPPF) team in the SL POCC during the IML-1 mission.

Critical Point Facility (CPE) Group in the Spacelab Payload Operations Control Center (SL POCC)

Science.gov (United States)

1992-01-01

The primary payload for Space Shuttle Mission STS-42, launched January 22, 1992, was the International Microgravity Laboratory-1 (IML-1), a pressurized manned Spacelab module. The goal of IML-1 was to explore in depth the complex effects of weightlessness of living organisms and materials processing. Around-the-clock research was performed on the human nervous system's adaptation to low gravity and effects of microgravity on other life forms such as shrimp eggs, lentil seedlings, fruit fly eggs, and bacteria. Materials processing experiments were also conducted, including crystal growth from a variety of substances such as enzymes, mercury iodide, and a virus. The Huntsville Operations Support Center (HOSC) Spacelab Payload Operations Control Center (SL POCC) at the Marshall Space Flight Center (MSFC) was the air/ground communication channel used between the astronauts and ground control teams during the Spacelab missions. Featured is the Critical Point Facility (CPE) group in the SL POCC during STS-42, IML-1 mission.

Earth cloud, aerosol, and radiation explorer optical payload development status

Science.gov (United States)

Hélière, A.; Wallace, K.; Pereira do Carmo, J.; Lefebvre, A.

2017-09-01

The European Space Agency (ESA) and the Japan Aerospace Exploration Agency (JAXA) are co-operating to develop as part of ESA's Living Planet Programme, the third Earth Explorer Core Mission, EarthCARE, with the ojective of improving the understanding of the processes involving clouds, aerosols and radiation in the Earth's atmosphere. EarthCARE payload consists of two active and two passive instruments: an ATmospheric LIDar (ATLID), a Cloud Profiling Radar (CPR), a Multi-Spectral Imager (MSI) and a Broad-Band Radiometer (BBR). The four instruments data are processed individually and in a synergetic manner to produce a large range of products, which include vertical profiles of aerosols, liquid water and ice, observations of cloud distribution and vertical motion within clouds, and will allow the retrieval of profiles of atmospheric radiative heating and cooling. MSI is a compact instrument with a 150 km swath providing 500 m pixel data in seven channels, whose retrieved data will give context to the active instrument measurements, as well as providing cloud and aerosol information. BBR measures reflected solar and emitted thermal radiation from the scene. Operating in the UV range at 355 nm, ATLID provides atmospheric echoes from ground to an altitude of 40 km. Thanks to a high spectral resolution filtering, the lidar is able to separate the relative contribution of aerosol and molecular scattering, which gives access to aerosol optical depth. Co-polarised and cross-polarised components of the Mie scattering contribution are measured on dedicated channels. This paper will provide a description of the optical payload implementation, the design and characterisation of the instruments.

Using Pre-Melted Phase Change Material to Keep Payloads in Space Warm for Hours without Power

Science.gov (United States)

Choi, Michael

2013-01-01

Adding phase change material (PCM) to a mission payload can maintain its temperature above the cold survival limit, without power, for several hours in space. For the International Space Station, PCM is melted by heaters just prior to the payload translation to the worksite when power is available. When power is cut off during the six-hour translation, the PCM releases its latent heat to make up the heat loss from the radiator(s) to space. For the interplanetary Probe, PCM is melted by heaters just prior to separation from the orbiter when power is available from the orbiter power system. After the Probe separates from the orbiter, the PCM releases its latent heat to make up the heat loss from the Probe exterior to space. Paraffin wax is a good PCM candidate.

Behavioural sleep treatments and night time crying in infants: challenging the status quo.

Science.gov (United States)

Blunden, Sarah L; Thompson, Kirrilly R; Dawson, Drew

2011-10-01

In Australia, as in many Westernised industrialised nations, the majority of families encourage infants to sleep alone or 'solo' from an early age. Sleeping solo can increase night time crying, which in turn disrupts sleep for both parent and infant. Night time waking and crying are frequently culturally constructed as behavioural sleep 'problems'. The pursuit of solo sleeping is thus achieved through 'behavioural sleep treatments' that teach an infant to sleep alone. Some behavioural extinction treatments necessitate a parent leaving an infant to cry for extended periods unattended, a practice reportedly difficult for parents. Despite parent's anxieties, and the potential (though little studied) stress to the infant, the pursuit of those behavioural sleep treatments are advocated by many psychologists and clinicians as acceptable and necessary interventions. This paper questions this necessity and critically reviews and debates these methods from biological, anthropological and cultural perspectives. Specifically, it considers Foucaultian, Leidloffian, attachment and behavioural perspectives. The central debate in this paper is if and why an infant's nocturnal cries should be ignored. It challenges the aetiology and acceptance of the status quo in the hope of revisiting the underlying belief that these methods are necessary. In doing so, the paper theorises the ways in which current sleep training techniques do or do not satisfy the needs of infants and their parents and questions the extent to which they can be reconciled. The paper posits an agenda for further research in the area that may facilitate the reconciliation of the needs of parents and those of their infants. Copyright © 2010 Elsevier Ltd. All rights reserved.

Moments on a Coning M864 by a Liquid Payload: The Candlestick Problem and Porous Media

National Research Council Canada - National Science Library

Cooper, Gene R

2006-01-01

.... Eigen frequencies and their impact on liquid moments are discussed concerning the flight stability of the projectile for a wide range of payload configurations and porosities when the projectile is subjected to various coning frequencies.

Ultra-Precision Manufacturing Technology for Miniature & Complex-Form Integrated Opto-Mechanical Structures for Sensors Payloads, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — We propose to demonstrate ultra precision manufacturing of components for NASA payloads, specifically for electro-optical and infrared sensors that are used in...

Nigerian Veterinary Journal :A retrospective study was conducted to ...

African Journals Online (AJOL)

jeju n ico li t is and immunity in primates: epidemiology of natural infestation, p. 148-156. In:Nachamkin, M.J. Blaser, and L.S.. Tompkins (ed.), Campylobacter: Current status and future trends. American Society for Microbiology,. Washington, DC. SHARMA, A.K., NAYAK,\\>VADI, S.,. CHANDRATRE, G.A., Saini, M, Das,.

Parimad näidendid 2003 Unduskilt ja Lennukilt / Neeme Korv

Index Scriptorium Estoniae

Korv, Neeme, 1974-

2003-01-01

I preemia: Urmas Lennuk "Boob teab", Jaan Undusk "Quevedo"; II preemia: Anu Allas "Lendav rõdu ehk Nagu nad tahtsid", Raivo Kütt "Papa (Sõtse ja venna)"; III preemia Jakob Karu "Asjade seis", Hans Nordberg "aaron : juuni"; ergutuspreemia: Urmas Lennuk "Kadunud kindapood", Urmas Vadi "Kadunud kosmoses", Jaan Võõramaa "Mamma";

STS-95 Payload Specialist Mukai participates in a parade in Cocoa Beach

Science.gov (United States)

1998-01-01

STS-95 Payload Specialist Chiaki Mukai is perched on the back of a red 1999 C-5 Corvette convertible during a parade down State Road A1A in nearby Cocoa Beach. Organizers of the parade include the Cocoa Beach Area Chamber of Commerce, the Brevard County Tourist Development Council, and the cities of Cape Canaveral and Cocoa Beach. The parade is reminiscent of those held after missions during the Mercury Program.

A Novel Quantum Video Steganography Protocol with Large Payload Based on MCQI Quantum Video

Science.gov (United States)

Qu, Zhiguo; Chen, Siyi; Ji, Sai

2017-11-01

As one of important multimedia forms in quantum network, quantum video attracts more and more attention of experts and scholars in the world. A secure quantum video steganography protocol with large payload based on the video strip encoding method called as MCQI (Multi-Channel Quantum Images) is proposed in this paper. The new protocol randomly embeds the secret information with the form of quantum video into quantum carrier video on the basis of unique features of video frames. It exploits to embed quantum video as secret information for covert communication. As a result, its capacity are greatly expanded compared with the previous quantum steganography achievements. Meanwhile, the new protocol also achieves good security and imperceptibility by virtue of the randomization of embedding positions and efficient use of redundant frames. Furthermore, the receiver enables to extract secret information from stego video without retaining the original carrier video, and restore the original quantum video as a follow. The simulation and experiment results prove that the algorithm not only has good imperceptibility, high security, but also has large payload.

Validation and Training at the Erasmus-USOC Using Payload Simulators

Science.gov (United States)

Cornelissen, F.; Wormgoor, P.

2008-08-01

With the launch of Columbus this year, Europeans will have for the first time their own scientific lab in orbit, making it possible to actually start the real exploitation of the scientific lab. Since Columbus is build with a European effort, the scientific return of the Columbus exploitation has been organized in a combined European collaboration as well. Many research stations located in nearly all corners of Europe will benefit from the capability to perform scientific experiments in microgravity aboard the pressurized research module. This is the direct result of the geographically dispersion of the responsibility for gaining scientific benefits. The monitoring and control of Columbus and its payloads in the different operations centers throughout Europe is bound technically in the so-called Columbus Decentralized Monitoring and Control System (CD- MCS). With a growing set of (scientific) capabilities onboard the International Space Station whilst having a stable crew-size onboard, the crew-time per payload is diminishing. However, being able to perform scientific monitoring from the ground segment will secure and optimize the scientific return. This requires proper training of operators on ground as well as the validation of scientific operations controlled from ground. After all, erroneous operations will negatively impact scientific return, even more with limited flight crew time. Both training and validation benefit greatly from the use of simulation. In this paper we will put forward that the use of modular simulators has been of great benefit in supporting the Erasmus-USOC in the exploitation of the European Drawer Rack (EDR) and the European Technology Exposure Facility (EuTEF) of the Columbus science lab.

Software engineering and data management for automated payload experiment tool

Science.gov (United States)

Maddux, Gary A.; Provancha, Anna; Chattam, David

1994-01-01

The Microgravity Projects Office identified a need to develop a software package that will lead experiment developers through the development planning process, obtain necessary information, establish an electronic data exchange avenue, and allow easier manipulation/reformatting of the collected information. An MS-DOS compatible software package called the Automated Payload Experiment Tool (APET) has been developed and delivered. The objective of this task is to expand on the results of the APET work previously performed by University of Alabama in Huntsville (UAH) and provide versions of the software in a Macintosh and Windows compatible format. Appendix 1 science requirements document (SRD) Users Manual is attached.

A monograph of the National Space Transportation System Office (NSTSO) integration activities conducted at the NASA Lyndon B. Johnson Space Center for the EASE/ACCESS payload flown on STS 61-B

Science.gov (United States)

Chassay, Charles

1987-01-01

The integration process of activities conducted at the NASA Lyndon B. Johnson Space Center (JSC) for the Experimental Assembly of Structures in Extravehicular activity (EASE)/Assembly Concept for Construction of Erectable Space Structures (ACCESS) payload is provided as a subset to the standard payload integration process used by the NASA Space Transportation System (STS) to fly payloads on the Space Shuttle. The EASE/ACCESS payload integration activities are chronologically reviewed beginning with the initiation of the flight manifesting and integration process. The development and documentation of the EASE/ACCESS integration requirements are also discussed along with the implementation of the mission integration activities and the engineering assessments supporting the flight integration process. In addition, the STS management support organizations, the payload safety process leading to the STS 61-B flight certification, and the overall EASE/ACCESS integration schedule are presented.

Analysis of payload bay magnetic fields due to dc power multipoint and single point ground configurations

Science.gov (United States)

Lawton, R. M.

1976-01-01

An analysis of magnetic fields in the Orbiter Payload Bay resulting from the present grounding configuration (structure return) was presented and the amount of improvement that would result from installing wire returns for the three dc power buses was determined. Ac and dc magnetic fields at five points in a cross-section of the bay are calculated for both grounding configurations. Y and Z components of the field at each point are derived in terms of a constant coefficient and the current amplitude of each bus. The dc loads assumed are 100 Amperes for each bus. The ac noise current used is a spectrum 6 db higher than the Orbiter equipment limit for narrowband conducted emissions. It was concluded that installing return wiring to provide a single point ground for the dc Buses in the Payload Bay would reduce the ac and dc magnetic field intensity by approximately 30 db.

STS-95 Payload Specialist Glenn participates in a parade in Cocoa Beach

Science.gov (United States)

1998-01-01

STS-95 Payload Specialist John H. Glenn Jr. waves to a dense crowd of well-wishers from the back of a silver 1999 C-5 Corvette convertible during a parade down State Road A1A in nearby Cocoa Beach. Organizers of the parade include the Cocoa Beach Area Chamber of Commerce, the Brevard County Tourist Development Council, and the cities of Cape Canaveral and Cocoa Beach. The parade is reminiscent of those held after missions during the Mercury Program.

Millest nad kirjutavad ehk Näidendivõistluse tänavusügisene saak / Triin Sinissaar

Index Scriptorium Estoniae

Sinissaar, Triin

2003-01-01

I preemia: Urmas Lennuk, "Boob teab"ja Jaan Undusk, "Quevedo"; II preemia: Anu Allas, "Lendav rõdu ehk Nagu nad tahtsid" ja Raivo Kütt, "Papa" ("Sõtse ja venna"); III preemia Jakob Karu, "Asjade seis" ja Hans Nordberg, "aaron : juuni"; ergutuspreemia: Urmas Lennuk, "Kadunud kindapood", Urmas Vadi, "Kadunud kosmoses" ja Jaan Võõramaa, "Mamma"

Selgusid näidendivõistluse võitjad

Index Scriptorium Estoniae

2003-01-01

I preemia: Urmas Lennuk "Boob teab"ja Jaan Undusk "Quevedo"; II preemia: Anu Allas "Lendav rõdu ehk Nagu nad tahtsid" ja Raivo Kütt "Papa (Sõtse ja venna)"; III preemia Jakob Karu "Asjade seis" ja Hans Nordberg "aaron : juuni"; ergutuspreemia: Urmas Lennuk "Kadunud kindapood", Urmas Vadi "Kadunud kosmoses" ja Jaan Võõramaa "Mamma"

Short outlines of books by Estonian authors / Brita Melts and Rutt Hinrikus

Index Scriptorium Estoniae

Melts, Brita

2011-01-01

Arvustus: Vadi, Urmas. Kirjad tädi Annele. Pärnu : Jumalikud Ilmutused, 2010 ; Sommer, Lauri. Kolm yksiklast. Tallinn : Menu Kirjastus, 2010 ; Hargla, Indrek. Apteeker Melchior ja Oleviste mõistatus. Tallinn : Varrak, 2010 ; Hargla, Indrek. Apteeker Melchior ja Rataskaevu viirastus. Tallinn : Varrak, 2010 ; Pihelgas, Carolina. Metsas algavad hääled. Tallinn : Eesti Keele Sihtasutus, 2010

Soomes ilmusid eesti raamatud

Index Scriptorium Estoniae

2004-01-01

Mehis Heinsaare "Härra Pauli kroonikad" ("Herra Paulin aikakirja"), tõlkinud Mika Keränen ; "Tallinnasta pois", eesti groteskse novelli antoloogia, autorid Olavi Ruitlane, Jüri Ehlvest, Aapo Ilves, Andrus Kivirähk, Kerttu Rakke, Peeter Sauter, Mehis Heinsaar, Matt Barker, Eeva Park, Kaur Kender, Veiko Märka, Urmas Vadi ja Ervin Õunapuu

Space Station Integrated Kinetic Launcher for Orbital Payload Systems (SSIKLOPS) - Cyclops

Science.gov (United States)

Smith, James P.; Lamb, Craig R.; Ballard, Perry G.

2013-01-01

Access to space for satellites in the 50-100 kg class is a challenge for the small satellite community. Rideshare opportunities are limited and costly, and the small sat must adhere to the primary payloads schedule and launch needs. Launching as an auxiliary payload on an Expendable Launch Vehicle presents many technical, environmental, and logistical challenges to the small satellite community. To assist the community in mitigating these challenges and in order to provide the community with greater access to space for 50-100 kg satellites, the NASA International Space Station (ISS) and Engineering communities in collaboration with the Department of Defense (DOD) Space Test Program (STP) is developing a dedicated 50-100 kg class ISS small satellite deployment system. The system, known as Cyclops, will utilize NASA's ISS resupply vehicles to launch small sats to the ISS in a controlled pressurized environment in soft stow bags. The satellites will then be processed through the ISS pressurized environment by the astronaut crew allowing satellite system diagnostics prior to orbit insertion. Orbit insertion is achieved through use of the Japan Aerospace Exploration Agency's Experiment Module Robotic Airlock (JEM Airlock) and one of the ISS Robotic Arms. Cyclops' initial satellite deployment demonstration of DOD STP's SpinSat and UT/TAMU's Lonestar satellites will be toward the end of 2013 or beginning of 2014. Cyclops will be housed on-board the ISS and used throughout its lifetime. The anatomy of Cyclops, its concept of operations for satellite deployment, and its satellite interfaces and requirements will be addressed further in this paper.

Healthcare professionals' use of health clouds: Integrating technology acceptance and status quo bias perspectives.

Science.gov (United States)

Hsieh, Pi-Jung

2015-07-01

Cloud computing technology has recently been seen as an important milestone in medical informatics development. Despite its great potential, there are gaps in our understanding of how users evaluate change in relation to the health cloud and how they decide to resist it. Integrating technology acceptance and status quo bias perspectives, this study develops an integrated model to explain healthcare professionals' intention to use the health cloud service and their intention to resist it. A field survey was conducted in Taiwan to collect data from healthcare professionals; a structural equation model was used to examine the data. A valid sample of 209 healthcare professionals was collected for data analysis. The results show that healthcare professionals' resistance to the use of the health cloud is the result of regret avoidance, inertia, perceived value, switching costs, and perceived threat. Attitude, subjective norm, and perceived behavior control are shown to have positive and direct effects on healthcare professionals' intention to use the health cloud. The results also indicate a significant negative effect in the relationship between healthcare professionals' intention and resistance to using the health cloud. Our study illustrates the importance of incorporating user resistance in technology acceptance studies in general and in health technology usage studies in particular. This study also identifies key factors for practitioners and hospitals to make adoption decisions in relation to the health cloud. Further, the study provides a useful reference for future studies in this subject field. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

A variable geometry truss manipulator for positioning large payloads

International Nuclear Information System (INIS)

Stoughton, R.S.; Tucker, J.C.; Horner, C.G.

1995-02-01

A major thrust within the Department of Energy's (DOE) Decontamination and Dismantling (D ampersand D) Robotics program is the development of a Selective Equipment Removal System (SERS). SERS will consist of a mobile vehicle, a Dual-Arm Work Module (DAWM), and a deployment manipulator capable of extending the DAWM up to 6.096m (20) from the vehicle. The DAWM, built by RedZone Robotics, includes two Schilling Titan II manipulators, a unique five degree-of-freedom (DOF) module for positioning/orienting the two Schilling arms, and a massive steel backplane to maintain structural rigidity. Together with its payload, the DAWM weighs about 975 kg (2150 pounds). In order to accurately position the DAWM, the Pacific Northwest Laboratory (PNL) together with the National Aeronautics and Space Administration's Langley Research Center (NASA LARC) are developing a deployment manipulator, which includes two double-octahedral Variable Geometry Truss (VGT) modules connected with a static truss section. The entire SERS system (Figure 1) will include the mobile vehicle, a 2-DOF base actuation system (waist rotate and pitch) with an output link approximately 2.134m (7) in length, the VGT system and the DAWM. The VGT system (Figure 2) consists of a 1.067m (42) diameter (∼1.346m (53) long) base VGT, which mounts to the end of the output link of the base actuation system, a 1.524m (60) long static truss section which tapers from 1.067m (42) diameter at its base to 0.8128m (32) diameter at the end, and a 0.8128m (32) diameter (∼1.0922m (43) long) tip VGT to which the DAWM is mounted. The stiffness of the VGT system is such that with the base VGT mounted to a rigid base and the VGT system oriented horizontally (worst case), the static deflection of the DAWM together with full payload will be less than 0.0254m

Application Possibility of Smartphone as Payload for Photogrammetric Uav System

Science.gov (United States)

Yun, M. H.; Kim, J.; Seo, D.; Lee, J.; Choi, C.

2012-07-01

Smartphone can not only be operated under 3G network environment anytime and anyplace but also cost less than the existing photogrammetric UAV since it provides high-resolution image, 3D location and attitude data on a real-time basis from a variety of built-in sensors. This study is aimed to assess the possibility of smartphone as a payload for photogrammetric UAV system. Prior to such assessment, a smartphone-based photogrammetric UAV system application was developed, through which real-time image, location and attitude data was obtained using smartphone under both static and dynamic conditions. Subsequently the accuracy assessment on the location and attitude data obtained and sent by this system was conducted. The smartphone images were converted into ortho-images through image triangulation. The image triangulation was conducted in accordance with presence or absence of consideration of the interior orientation (IO) parameters determined by camera calibration. In case IO parameters were taken into account in the static experiment, the results from triangulation for any smartphone type were within 1.5 pixel (RMSE), which was improved at least by 35% compared to when IO parameters were not taken into account. On the contrary, the improvement effect of considering IO parameters on accuracy in triangulation for smartphone images in dynamic experiment was not significant compared to the static experiment. It was due to the significant impact of vibration and sudden attitude change of UAV on the actuator for automatic focus control within the camera built in smartphone under the dynamic condition. This cause appears to have a negative impact on the image-based DEM generation. Considering these study findings, it is suggested that smartphone is very feasible as a payload for UAV system. It is also expected that smartphone may be loaded onto existing UAV playing direct or indirect roles significantly.

STS-98 U.S. Lab Destiny rests in Atlantis' payload bay

Science.gov (United States)

2001-01-01

KENNEDY SPACE CENTER, Fla. -- The U.S. Lab Destiny rests in the payload bay of Space Shuttle Atlantis. A key element in the construction of the International Space Station, Destiny is 28 feet long and weighs 16 tons. This research and command-and-control center is the most sophisticated and versatile space laboratory ever built. It will ultimately house a total of 23 experiment racks for crew support and scientific research. Destiny will fly on STS-98, the seventh construction flight to the ISS. Launch of STS-98 is scheduled for Jan. 19 at 2:11 a.m. EST.

An integrated payload design for the Exoplanet Characterisation Observatory (EChO)

DEFF Research Database (Denmark)

Swinyard, Bruce; Tinetti, Giovanna; Tennyson, Jonathan

2012-01-01

by ESA in the context of a medium class mission within the Cosmic Vision programme for launch post 2020. The payload suite is required to provide simultaneous coverage from the visible to the mid-infrared and must be highly stable and effectively operate as a single instrument. In this paper we describe......The Exoplanet Characterisation Observatory (EChO) is a space mission dedicated to undertaking spectroscopy of transiting exoplanets over the widest wavelength range possible. It is based around a highly stable space platform with a 1.2 m class telescope. The mission is currently being studied...

Sandwich Structure Risk Reduction in Support of the Payload Adapter Fitting

Science.gov (United States)

Nettles, A. T.; Jackson, J. R.; Guin, W. E.

2018-01-01

Reducing risk for utilizing honeycomb sandwich structure for the Space Launch System payload adapter fitting includes determining what parameters need to be tested for damage tolerance to ensure a safe structure. Specimen size and boundary conditions are the most practical parameters to use in damage tolerance inspection. The effect of impact over core splices and foreign object debris between the facesheet and core is assessed. Effects of enhanced damage tolerance by applying an outer layer of carbon fiber woven cloth is examined. A simple repair technique for barely visible impact damage that restores all compression strength is presented.

Ground processing of the McDonnell Douglas Payload Assist Module (PAM)

Science.gov (United States)

Bryan, C. E.; Maclean, D. A.

1985-01-01

The payload assist module (PAM) ground processing operations which have evolved since they were started in 1982 are described. The objective of the changes was to reduce the prelaunch testing of the airborne support equipment to increase the throughput of PAM systems while not compromising the reliability of the system when functioned on-orbit. The changes that resulted from the initial cargo element ground processing, the on-orbit performance of the systems, plus the postflight refurbishment and recertification of the airborne support equipment resulted in significant reductions in labor expenditures and work shifts required to prepare a PAM system for flight.

UFFO/ Lomonosov: The Payload for the Observation of Early Photons from Gamma Ray Bursts

Science.gov (United States)

Park, I. H.; Panasyuk, M. I.; Reglero, V.; Chen, P.; Castro-Tirado, A. J.; Jeong, S.; Bogomolov, V.; Brandt, S.; Budtz-Jørgensen, C.; Chang, S.-H.; Chang, Y. Y.; Chen, C.-R.; Chen, C.-W.; Choi, H. S.; Connell, P.; Eyles, C.; Gaikov, G.; Garipov, G.; Huang, J.-J.; Huang, M.-H. A.; Jeong, H. M.; Kim, J. E.; Kim, M. B.; Kim, S.-W.; Lee, H. K.; Lee, J.; Lim, H.; Lin, C.-Y.; Liu, T.-C.; Nam, J. W.; Petrov, V.; Ripa, J.; Rodrigo, J. M.; Svertilov, S.; Wang, M.-Z.; Yashin, I.

2018-02-01

The payload of the UFFO (Ultra-Fast Flash Observatory)-pathfinder now onboard the Lomonosov spacecraft (hereafter UFFO/ Lomonosov) is a dedicated instrument for the observation of GRBs. Its primary aim is to capture the rise phase of the optical light curve, one of the least known aspects of GRBs. Fast response measurements of the optical emission of GRB will be made by a Slewing Mirror Telescope (SMT), a key instrument of the payload, which will open a new frontier in transient studies by probing the early optical rise of GRBs with a response time in seconds for the first time. The SMT employs a rapidly slewing mirror to redirect the optical axis of the telescope to a GRB position prior determined by the UFFO Burst Alert Telescope (UBAT), the other onboard instrument, for the observation and imaging of X-rays. UFFO/Lomonosov was launched successfully from Vostochny, Russia on April 28, 2016, and will begin GRB observations after completion of functional checks of the Lomonosov spacecraft. The concept of early GRB photon measurements with UFFO was reported in 2012. In this article, we will report in detail the first mission, UFFO/Lomonosov, for the rapid response to GRB observations.

Acoustic Test Results of Melamine Foam with Application to Payload Fairing Acoustic Attenuation Systems

Science.gov (United States)

Hughes, William O.; McNelis, Anne M.

2014-01-01

A spacecraft at launch is subjected to a harsh acoustic and vibration environment resulting from the passage of acoustic energy, created during the liftoff of a launch vehicle, through the vehicle's payload fairing. In order to ensure the mission success of the spacecraft it is often necessary to reduce the resulting internal acoustic sound pressure levels through the usage of acoustic attenuation systems. Melamine foam, lining the interior walls of the payload fairing, is often utilized as the main component of such a system. In order to better understand the acoustic properties of melamine foam, with the goal of developing improved acoustic attenuation systems, NASA has recently performed panel level testing on numerous configurations of melamine foam acoustic treatments at the Riverbank Acoustical Laboratory. Parameters assessed included the foam's thickness and density, as well as the effects of a top outer cover sheet material and mass barriers embedded within the foam. This testing followed the ASTM C423 standard for absorption and the ASTM E90 standard for transmission loss. The acoustic test data obtained and subsequent conclusions are the subjects of this paper.

Hardware Testing for the Optical PAyload for Lasercomm Science (OPALS)

Science.gov (United States)

Slagle, Amanda

2011-01-01

Hardware for several subsystems of the proposed Optical PAyload for Lasercomm Science (OPALS), including the gimbal and avionics, was tested. Microswitches installed on the gimbal were evaluated to verify that their point of actuation would remain within the acceptable range even if the switches themselves move slightly during launch. An inspection of the power board was conducted to ensure that all power and ground signals were isolated, that polarized components were correctly oriented, and that all components were intact and securely soldered. Initial testing on the power board revealed several minor problems, but once they were fixed the power board was shown to function correctly. All tests and inspections were documented for future use in verifying launch requirements.

Crème de la crème / Joel Sang

Index Scriptorium Estoniae

Sang, Joel, 1950-

2011-01-01

Auhinnažürii esimees iseloomustab Eesti Kultuurkapitali kirjandusauhindade laureaate: Indrek Koff (luule), Maarja Kangro (proosa), Urmas Vadi (näitekirjandus), Toomas Haug (esseistika), Lauri Sommer (vabaauhind), Amar Annus (ilukirjanduslik tõlge võõrkeelest eesti keelde), Ilmar Lehtpere (ilukirjanduslik tõlge eesti keelest võõrkeelde), Kristiina Kass (lastekirjandus), Sergei Issakov (venekeelse autori kirjandusauhind) ja Mart Velsker (artikliauhind)

STS-55 MS3 Harris draws blood sample from Payload Specialist Schlegel

Science.gov (United States)

1993-01-01

STS-55 German Payload Specialist 2 Hans Schlegel (left) serves as a test subject inside the Spacelab Deutsche 2 (SL-D2) science module onboard the Earth-orbiting Columbia, Orbiter Vehicle (OV) 102. Mission Specialist 3 (MS3) Bernard A. Harris, Jr, a physician, performs one of many blood draws designed to help investigate human physiology under microgravity conditions. The two crewmembers use intravehicular activity (IVA) foot restraints (foot loops) in front of Rack 10, a stowage rack, to steady themselves during the procedure. Schlegel represents the German Aerospace Research Establishment (DLR).

Magnetothermal release of payload from iron oxide/silica drug delivery agents

Energy Technology Data Exchange (ETDEWEB)

Luong, T.T., E-mail: thientai.luong@chem.kuleuven.be [KU Leuven, Department of Chemistry, Celestijnenlaan 200D, Heverlee 3001 (Belgium); Hanoi National University of Education, Faculty of Chemistry, Xuan Thuy 136, Cau Giay, Hanoi (Viet Nam); Knoppe, S.; Bloemen, M.; Brullot, W.; Strobbe, R. [KU Leuven, Department of Chemistry, Celestijnenlaan 200D, Heverlee 3001 (Belgium); Locquet, J.-P. [KU Leuven, Department of Physics, Celestijnenlaan 200D, Heverlee 3001 (Belgium); Verbiest, T. [KU Leuven, Department of Chemistry, Celestijnenlaan 200D, Heverlee 3001 (Belgium)

2016-10-15

The release of covalently bound Rhodamine B from iron oxide/mesoporous silica core/shell nanoparticles under magnetically induced heating was studied. The system acts as a model to study drug delivery and payload release under magnetothermal heating. - Graphical abstract: The release of covalently bound Rhodamine B from iron oxide/mesoporous silica core/shell nanoparticles under magnetically induced heating was studied. - Highlights: • Iron oxide/mesoporous-SiO{sub 2} core-shell NPs were synthesized. • The dye was covalently bound to SiO{sub 2} shells. • The release of dye under magnetothermal heating was studied. • The results are relevant for controlled drug release.

Preliminary analysis of an integrated logistics system for OSSA payloads. Volume 2: OSSA integrated logistics support strategy

Science.gov (United States)

Palguta, T.; Bradley, W.; Stockton, T.

1988-01-01

The purpose is to outline an Office of Space Science and Applications (OSSA) integrated logistics support strategy that will ensure effective logistics support of OSSA payloads at an affordable life-cycle cost. Program objectives, organizational relationships, and implementation of the logistics strategy are discussed.

Analysis of launch site processing effectiveness for the Space Shuttle 26R payload

Science.gov (United States)

Flores, Carlos A.; Heuser, Robert E.; Pepper, Richard E., Jr.; Smith, Anthony M.

1991-01-01

A trend analysis study has been performed on problem reports recorded during the Space Shuttle 26R payload's processing cycle at NASA-Kennedy, using the defect-flow analysis (DFA) methodology; DFA gives attention to the characteristics of the problem-report 'population' as a whole. It is established that the problem reports contain data which distract from pressing problems, and that fully 60 percent of such reports were caused during processing at NASA-Kennedy. The second major cause of problem reports was design defects.

Maximizing allowable cask payloads using zone-loading and cooling table specifications

International Nuclear Information System (INIS)

Hopf, J.E.; Lloyd, T.

2004-01-01

The newer dual-purpose canister designs generally have a higher fuel assembly capacity than earlier designs. Due to the resulting increases in thermal and radiological source terms from the assembly payload, this will generally result in higher cask system temperatures and cask external dose rates, making it more difficult to meet 10CFR71 and 10CFR72 thermal and radiological requirements. One approach to addressing this issue would be to employ advanced, and potentially expensive, engineering features to enhance cask shielding and heat removal capabilities. Another approach involves the strategic loading of fuel assemblies in specific locations within the dual-purpose canister, along with a more rigorous analysis of the specific assembly payload configuration inside the canister. This second approach, which does not involve difficult engineering design and fabrication, and which does not add to the cost of the canister or cask, is the subject of this paper. Traditional cask licensing analyses simply model a uniform assembly payload over the entire canister interior. One, or perhaps a few ''design-basis'' combinations of burnup, enrichment, and cooling time are analyzed and qualified. All loaded assemblies must be completely bounded by one or more of the analyzed sets of design basis assembly parameters. Effectively, the ''hottest'' possible assembly is modeled in all loading slots. This paper discusses two techniques that could greatly increase the number of spent fuel pool assemblies that qualify for storage or transportation, especially when taken together. The first technique, referred to as ''zone loading'' involves loading relatively ''cold'' assemblies in the locations around the edge of the canister. The outer assemblies will almost entirely shield the neutron and gamma fluxes from the interior assemblies, reducing their contribution to cask external dose rate to very low levels. This allows much ''hotter'' possible assembly is modeled in all loading slots

Health disparities, politics, and the maintenance of the status quo: A new theory of inequality.

Science.gov (United States)

Rodriguez, Javier M

2018-03-01

Individuals participate in politics to influence the politicians that prescribe the policies and programs that distribute the public goods and services that shape the social determinants of health. But the opportunity to participate in politics is conditional on survival, and in the U.S., the haves enjoy a significant survival advantage over the have-nots. This process can be detected looking at the relationship between age and participation: It is inflated by the fact that, as time progresses, a higher proportion of low-SES, low-level participation individuals die and are therefore excluded from the available pool of participants faster than high-SES, high-level participation individuals. We analyze this mechanism applying propensity scores matching and multivariate regressions on data from MIDUS I (Midlife in the United States: A National Study of Health and Well-being) and its 10-year mortality follow-up. Results show that health differences between 10-year survivors and non-survivors explain 56% of their differences in socio-political participation. Survivors participate at higher levels than non-survivors across all age groups and SES levels; without detrimental differences in health, individuals would participate 28% more as they age. The same disadvantaged individuals whose increased participation would pressure for redistributive policies are those who die off from the available pool of participants at much higher rates than socioeconomically advantaged individuals. The proposed conceptual model helps to explain how, through the early disappearance of the poor, continuing socio-political participation of high-SES survivors helps to perpetuate inequality in the status quo. Copyright © 2018 Elsevier Ltd. All rights reserved.

Kilometer-Scale Transient Atmospheres for Kinetic Payload Deposition on Icy Bodies

Science.gov (United States)

Koch, James

Entry, descent, and landing technologies for space exploration missions to atmospheric bodies traditionally exploit the body's ambient atmosphere as a medium through which a spacecraft or probe can interact to transfer momentum and energy for a soft landing. For bodies with no appreciable atmosphere, a significant engineering challenge exists to overcome the lack of passive methods to decelerate a spacecraft or probe. Proposed is a novel means for the creation of a transient atmosphere for airless icy bodies through the use of a two stage payload-penetrator probe. The first stage is a hyper-velocity penetrator that impacts the icy body. The second stage is an aero-braking-capable probe directed to pass through the ejecta plume from the hyper-velocity impact. Both experimental and computational studies show that a controlled high-energy impact can direct and transfer energy and momentum to a probe via a collimated ejecta plume. In an effort to provide clarity to this unexplored class of missions, a modeling-based engineering approach is taken to provide a first-order estimation of some of the involved physical phenomena. Three sub-studies are presented: an examination and characterization of ice plumes, modeling plume-probe interaction, and the extension of plume modeling as the basis for conceptual mission design. The modeling efforts are centered about two modeling formulations: smoothed particle hydrodynamics (SPH) and the arbitrary Largrangian-Eulerian (ALE) set of techniques. A database of fully-developed hypervelocity impacts and their associated plumes is created and used as inputs to a 1-D mathematical model for the interaction of a continuum-based plume and probe. A parametric study based on the hyper-velocity impact and staging of the probe-penetrator system is presented and discussed. Shown is that a tuned penetrator-probe mission has the potential to increase spacecraft payload mass fraction over conventional soft landing schemes.

Italy's contribution, from a medical standpoint, to the space safety of payload scientists, and perspectives for the future

Science.gov (United States)

Rotondo, G.; Ramacci, G. A.; Meineri, G.; Modugno, G. C.; Monesi, F.

In Italy, the selection of the Italian payload scientists has been performed according to the Spacelab Program of ESA. Twenty-four subjects underwent a screening performed by the Health Service of Italian Air Force. They were requested to pass an exercise test on treadmill and another ten-minute test on centrifuge, subject to the effect of + 3 G z. The authors briefly describe the results of the test. Noteworthy is the determination of Central Flicker Fusion Frequency. This parameter makes it possible to assess the endurance level of the subject, much earlier than other techniques (e.g. EKG). The importance of an accurate preliminary screening is emphasized as well as of successive training periods. Future studies will be undertaken to compare evoked cortical potentials with behaviour parameters of space safety, with a view to setting up a subtle tool of evaluation for both future candidates and payload scientists.

Optical distribution of local oscillators in future telecommunication satellite payloads

Science.gov (United States)

Benazet, Benoît; Sotom, Michel; Maignan, Michel; Berthon, Jacques

2017-11-01

The distribution of high spectral purity reference signals over optical fibre in future telecommunication satellite payloads is presented. Several types of applications are considered, including the distribution of a reference frequency at 10 MHz (Ultra-Stable Reference Oscillator) as well as the distribution of a radiofrequency oscillator around 800 MHz (Master Local Oscillator). The results of both experimental and theoretical studies are reported. In order to meet phase noise requirements for the USRO distribution, the use of an optimised receiver circuit based on an optically synchronised oscillator is investigated. Finally, the optical distribution of microwave local oscillators at frequencies exceeding 20 GHz is described. Such a scheme paves the way to more advanced sub-systems involving optical frequency-mixing and optical transmission of microwave signals, with applications to multiple-beam active antennas.

Correlation Of Terrestrial gamma flashes, Electric fields, and Lightning strikes (COTEL) in thunderstorms using networked balloon payloads developed by university and community college students

Science.gov (United States)

Landry, B. J.; Blair, D.; Causey, J.; Collins, J.; Davis, A.; Fernandez-Kim, V.; Kennedy, J.; Pate, N.; Kearney, C.; Schayer, C.; Turk, E.; Cherry, M. L.; Fava, C.; Granger, D.; Stewart, M.; Guzik, T. G.

2017-12-01

High energy gamma ray flashes from terrestrial sources have been observed by satellites for decades, but the actual mechanism, assumed to be thunderstorm lightning, has yet to be fully characterized. The goal of COTEL, funded by NASA through the University Student Instrument Project (USIP) program, is to correlate in time TGF events, lightning strikes, and electric fields inside of thunderstorms. This will be accomplished using a small network of balloon-borne payloads suspended in and around thunderstorm environments. The payloads will detect and timestamp gamma radiation bursts, lightning strikes, and the intensity of localized electric fields. While in flight, data collected by the payloads will be transmitted to a ground station in real-time and will be analyzed post-flight to investigate potential correlations between lightning, TGFs, and electric fields. The COTEL student team is in its second year of effort having spent the first year developing the basic balloon payloads and ground tracking system. Currently the team is focusing on prototype electric field and gamma radiation detectors. Testing and development of these systems will continue into 2018, and flight operations will take place during the spring 2018 Louisiana thunderstorm season. The presentation, led by undergraduate Physics student Brad Landry, will cover the student team effort in developing the COTEL system, an overview of the system architecture, balloon flight tests conducted to date, preliminary results from prototype detectors, lessons learned for student-led science projects, and future plans.

Novel Payload Architectures for LISA

Science.gov (United States)

Johann, Ulrich A.; Gath, Peter F.; Holota, Wolfgang; Schulte, Hans Reiner; Weise, Dennis

2006-11-01

As part of the current LISA Mission Formulation Study, and based on prior internal investigations, Astrium Germany has defined and preliminary assessed novel payload architectures, potentially reducing overall complexity and improving budgets and costs. A promising concept is characterized by a single active inertial sensor attached to a single optical bench and serving both adjacent interferometer arms via two rigidly connected off-axis telescopes. The in-plane triangular constellation ``breathing angle'' compensation is accomplished by common telescope in-field of view pointing actuation of the transmit/received beams line of sight. A dedicated actuation mechanism located on the optical bench is required in addition to the on bench actuators for differential pointing of the transmit and receive direction perpendicular to the constellation plane. Both actuators operate in a sinusoidal yearly period. A technical challenge is the actuation mechanism pointing jitter and the monitoring and calibration of the laser phase walk which occurs while changing the optical path inside the optical assembly during re-pointing. Calibration or monitoring of instrument internal phase effects e.g. by a laser metrology truss derived from the existing interferometry is required. The architecture exploits in full the two-step interferometry (strap down) concept, separating functionally inter spacecraft and intra-spacecraft interferometry (reference mass laser metrology degrees of freedom sensing). The single test mass is maintained as cubic, but in free-fall in the lateral degrees of freedom within the constellation plane. Also the option of a completely free spherical test mass with full laser interferometer readout has been conceptually investigated. The spherical test mass would rotate slowly, and would be allowed to tumble. Imperfections in roundness and density would be calibrated from differential wave front sensing in a tetrahedral arrangement, supported by added attitude

In-band 16-QAM and multi-carrier SCM modulation to label DPSK payload signals for IP packet routing

NARCIS (Netherlands)

Tafur Monroy, I.; Vegas Olmos, J.J.; Garcia Larrode, M.; Koonen, A.M.J.; Diaz Jimenez, C.

2006-01-01

We present an experimental demonstration of the feasibility of in-band subcarrier multiplexing (SCM) for labeling of differential phase shift keying (DPSK) payload signals. We show that by proper selection of the value of the subcarrier frequency the effect of the superimposed SCM label on the

La crisis económica y el movimiento independentista catalán

Directory of Open Access Journals (Sweden)

Aura Daniela Guzman Ramirez

2013-11-01

Full Text Available La crisis económica ha tenido una fuerte repercusión en Europa, pero en España, al estar organizada como un régimen de autonomías y reconocer la existencia de tres nacionalidades históricas, tiene una expresión particular. En el caso específico de una de ellas, Cataluña, la crisis se está expresando en un creciente fortalecimiento del movimiento independentista. En vista de la actualidad de la problemática y de las últimas manifestaciones masivas por la independencia catalana, este artículo ha hecho un seguimiento –a través de la prensa cotidiana– a la crisis en Cataluña y su relación con el movimiento independentista, y a la creciente polarización política entre el gobierno central español y el gobierno catalán en los últimos meses. Expresión concreta del pulso independentista es el llamado desde el partido de gobierno catalán (CiU y su “socio” en el gobierno (ERC, pero también a través de manifestaciones de la población, a un referendo para el 9 de noviembre de 2014 con dos preguntas centrales: “¿Quiere que Cataluña se convierta en un Estado? En caso afirmativo, ¿quiere que Cataluña sea un Estado independiente?” Empero, esta dinámica tiene su significado político más neurálgico en el cuestionamiento al régimen de transición instaurado durante el proceso democratizador en la década de los setenta. ¿Quo vadis España?

Muzikologija – zapoznela znanstvena disciplina?

Directory of Open Access Journals (Sweden)

Katarina Bedina

2003-12-01

Full Text Available Prispevek obravnava mesto muzikologije in njeno družbeno vlogo na pragu združene Evrope ob velikih političnih spremembah, ki se zrcalijo v vseh humanističnih znanostih in vnašajo precej negotovosti, za katere nihče ne vé, kako bodo učinkovale na stroko (posebno pri narodih s komaj rojeno državno suverenostjo, zato sodijo na konico širšega zanimanja. Prispevek navezuje na znano nemško polemiko (Musik-wissenschaft – quo vadis?, ki jo je sprožilo ob koncu osemdesetih let splošno nezadovoljstvo nad premalo učinkovitim vplivom muzikologije na javno življenje in (spodletele poskuse za obnovo humanističnih načel. Pod drobnogled so postavili tedanje muzikološke stolice na univerzah z očitki o vsebinsko in idejno zgrešenem izobraževanju muzikologov. Aktualnost tega vprašanja je vsesplošna, ker je muzikologija povsod nacionalna veda in nanjo pade pretežni del odgovornosti za glasbeno ozaveščenost naroda. Slovenska muzikološka dediščina se žal ne more postavljati s priviligirano politično podporo. Odvisna je od lastnih moči, ne glede na to, da ji je urojena maloštevilnost; obilica raziskovalnega gradiva daleč presega obstoječe (po številu samo pomlajajoče se delovne moči. Zato je tem bolj odvisna od učinkovitosti koncepta, v katerem sta nadarjenost za stroko in osebnostna kreativnost poglavitni gibali. To postaja z novimi časi vse bolj problem slovenske muzikologije, ne meni pa se za prislovično »slovensko trdoživost«.

Modernization of NASA's Johnson Space Center Chamber: A Payload Transport Rail System to Support Cryogenic Vacuum Optical Testing of the James Webb Space Telescope (JWST)

Science.gov (United States)

Garcia, Sam; Homan, Jonathan; Speed, John

2016-01-01

NASA is the mission lead for the James Webb Space Telescope (JWST), the next of the "Great Observatories", scheduled for launch in 2018. It is directly responsible for the integration and test (I&T) program that will culminate in an end-to-end cryo vacuum optical test of the flight telescope and instrument module in Chamber A at NASA Johnson Space Center. Historic Chamber A is the largest thermal vacuum chamber at Johnson Space Center and one of the largest space simulation chambers in the world. Chamber A has undergone a major modernization effort to support the deep cryogenic, vacuum and cleanliness requirements for testing the JWST. This paper describe the challenges of developing, integrating and modifying new payload rails capable of transporting payloads within the thermal vacuum chamber up to 65,000 pounds. Ambient and Cryogenic Operations required to configure for testing will be explained. Lastly review historical payload configurations stretching from the Apollo program era to current James Webb Space Telescope testing.

Web: A Wireless Experiment Box for the Dextre Pointing Package ELC Payload

Science.gov (United States)

Bleier, Leor Z.; Marrero-Fontanez, Victor J.; Sparacino, Pietro A.; Moreau, Michael C.; Mitchell, Jason W.

2012-01-01

The Wireless Experiment Box (WEB) was proposed to work with the International Space Station (ISS) External Wireless Communication (EWC) system to support high-definition video from the Dextre Pointing Package (DPP). DPP/WEB was a NASA GSFC proposed ExPRESS Logistics Carrier (ELC) payload designed to flight test an integrated suite of Autonomous Rendezvous and Docking (AR&D) technologies to enable a wide spectrum of future missions across NASA and other US Government agencies. The ISS EWC uses COTS Wireless Access Points (WAPs) to provide high-rate bi-directional communications to ISS. In this paper, we discuss WEB s packaging, operation, antenna development, and performance testing.

WEB - A Wireless Experiment Box for the Dextre Pointing Package ELC Payload

Science.gov (United States)

Bleier, Leor Z.; Marrero-Fontanez, Victor J.; Sparacino, Pietro A.; Moreau, Michael C.; Mitchell, Jason William

2012-01-01

The Wireless Experiment Box (WEB) was proposed to work with the International Space Station (ISS) External Wireless Communication (EWC) system to support high-definition video from the Dextre Pointing Package (DPP). DPP/WEB was a NASA GSFC proposed ExPRESS Logistics Carrier (ELC) payload designed to flight test an integrated suite of Autonomous Rendezvous and Docking (AR&D) technologies to enable a wide spectrum of future missions across NASA and other US Government agencies. The ISS EWC uses COTS Wireless Access Points (WAPs) to provide high-rate bi-directional communications to ISS. In this paper, we discuss WEB s packaging, operation, antenna development, and performance testing.

Cost-effective alternative to nano-encapsulation: Amorphous curcumin-chitosan nanoparticle complex exhibiting high payload and supersaturation generation.

Science.gov (United States)

Nguyen, Minh Hiep; Yu, Hong; Kiew, Tie Yi; Hadinoto, Kunn

2015-10-01

While the wide-ranging therapeutic activities of curcumin have been well established, its successful delivery to realize its true therapeutic potentials faces a major challenge due to its low oral bioavailability. Even though nano-encapsulation has been widely demonstrated to be effective in enhancing the bioavailability of curcumin, it is not without drawbacks (i.e. low payload and costly preparation). Herein we present a cost-effective bioavailability enhancement strategy of curcumin in the form of amorphous curcumin-chitosan nanoparticle complex (or curcumin nanoplex in short) exhibiting a high payload (>80%). The curcumin nanoplex was prepared by a simple yet highly efficient drug-polysaccharide complexation method that required only mixing of the curcumin and chitosan solutions under ambient condition. The effects of (1) pH and (2) charge ratio of chitosan to curcumin on the (i) physical characteristics of the nanoplex (i.e. size, colloidal stability and payload), (ii) complexation efficiency, and (iii) production yield were investigated from which the optimal preparation condition was determined. The nanoplex formation was found to favor low acidic pH and charge ratio below unity. At the optimal condition (i.e. pH 4.4. and charge ratio=0.8), stable curcumin nanoplex (≈260nm) was prepared at >90% complexation efficiency and ≈50% production yield. The amorphous state stability, colloidal stability, and in vitro non-cytotoxicity of the nanoplex were successfully established. The curcumin nanoplex produced prolonged supersaturation (3h) in the presence of hydroxypropyl methylcellulose (HPMC) at five times of the saturation solubility of curcumin. In addition, curcumin released from the nanoplex exhibited improved chemical stability owed to the presence of chitosan. Both results (i.e. high supersaturation and improved chemical stability) bode well for the ability of the curcumin nanoplex to enhance the bioavailability of curcumin clinically. Copyright © 2015

Short outlines of books by Estonian authors / Brita Melts, Rutt Hinrikus and Janika Kronberg

Index Scriptorium Estoniae

Melts, Brita

2015-01-01

Arvustus: Afanasjev, Vahur. Tünsamäe tigu. Tartu Tartu NAK, 2015 ; Vadi, Urmas. Kuidas me kõik reas niimoodi läheme. Tallinn : Tuum, 2014 ; Traat, Mats. Kolm Solveigi. Tartu : Ilmamaa, 2015 ; Saat, Mari. Matused ja laulupeod. Tartu : Petrone Print, 2015 ; Kivisilla, Veronika. Cantus firmus. Tallinn : Näo Kirik, 2015 ; Kolk, Jüri. Suur võidujooks. Tallinn : Tuum, 2015 ; Mudlum. Tõsine inimene. Tallinn : ZA/UM, 2014

Performance analysis of two-degree of freedom fractional order PID controllers for robotic manipulator with payload.

Science.gov (United States)

Sharma, Richa; Gaur, Prerna; Mittal, A P

2015-09-01

The robotic manipulators are multi-input multi-output (MIMO), coupled and highly nonlinear systems. The presence of external disturbances and time-varying parameters adversely affects the performance of these systems. Therefore, the controller designed for these systems should effectively deal with such complexities, and it is an intriguing task for control engineers. This paper presents two-degree of freedom fractional order proportional-integral-derivative (2-DOF FOPID) controller scheme for a two-link planar rigid robotic manipulator with payload for trajectory tracking task. The tuning of all controller parameters is done using cuckoo search algorithm (CSA). The performance of proposed 2-DOF FOPID controllers is compared with those of their integer order designs, i.e., 2-DOF PID controllers, and with the traditional PID controllers. In order to show effectiveness of proposed scheme, the robustness testing is carried out for model uncertainties, payload variations with time, external disturbance and random noise. Numerical simulation results indicate that the 2-DOF FOPID controllers are superior to their integer order counterparts and the traditional PID controllers. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.