WorldWideScience

Sample records for qualified forging vendor

  1. A framework for offshore vendor capability development

    Science.gov (United States)

    Yusuf Wibisono, Yogi; Govindaraju, Rajesri; Irianto, Dradjad; Sudirman, Iman

    2016-02-01

    Offshore outsourcing is a common practice conducted by companies, especially in developed countries, by relocating one or more their business processes to other companies abroad, especially in developing countries. This practice grows rapidly owing to the ease of accessing qualified vendors with a lower cost. Vendors in developing countries compete more intensely to acquire offshore projects. Indonesia is still below India, China, Malaysia as main global offshore destinations. Vendor capability is among other factors that contribute to the inability of Indonesian vendor in competing with other companies in the global market. Therefore, it is essential to study how to increase the vendor's capability in Indonesia, in the context of global offshore outsourcing. Previous studies on the vendor's capability mainly focus on capabilities without considering the dynamic of capabilities due to the environmental changes. In order to be able to compete with competitors and maintain the competitive advantage, it is necessary for vendors to develop their capabilities continuously. The purpose of this study is to develop a framework that describes offshore vendor capability development along the client-vendor relationship stages. The framework consists of three main components, i.e. the stages of client-vendor relationship, the success of each stage, and the capabilities of vendor at each stage.

  2. Performance Assessment Method for a Forged Fingerprint Detection Algorithm

    Science.gov (United States)

    Shin, Yong Nyuo; Jun, In-Kyung; Kim, Hyun; Shin, Woochang

    The threat of invasion of privacy and of the illegal appropriation of information both increase with the expansion of the biometrics service environment to open systems. However, while certificates or smart cards can easily be cancelled and reissued if found to be missing, there is no way to recover the unique biometric information of an individual following a security breach. With the recognition that this threat factor may disrupt the large-scale civil service operations approaching implementation, such as electronic ID cards and e-Government systems, many agencies and vendors around the world continue to develop forged fingerprint detection technology, but no objective performance assessment method has, to date, been reported. Therefore, in this paper, we propose a methodology designed to evaluate the objective performance of the forged fingerprint detection technology that is currently attracting a great deal of attention.

  3. Manufacturing of Precision Forgings by Radial Forging

    International Nuclear Information System (INIS)

    Wallner, S.; Harrer, O.; Buchmayr, B.; Hofer, F.

    2011-01-01

    Radial forging is a multi purpose incremental forging process using four tools on the same plane. It is widely used for the forming of tool steels, super alloys as well as titanium- and refractory metals. The range of application goes from reducing the diameters of shafts, tubes, stepped shafts and axels, as well as for creating internal profiles for tubes in Near-Net-Shape and Net-Shape quality. Based on actual development of a weight optimized transmission input shaft, the specific features of radial forging technology is demonstrated. Also a Finite Element Model for the simulation of the process is shown which leads to reduced pre-processing effort and reduced computing time compared to other published simulation methods for radial forging. The finite element model can be applied to quantify the effects of different forging strategies.

  4. Methods of forging steel

    OpenAIRE

    Pečoler, Primož

    2014-01-01

    The following work presents processes of steel forming, challenges when forging steel, forming machines suitable for forging and which choice of machine is most suitable for forging. We can separate steel forming to free forging and drop forging. Free forging can be divided to hand forging and machine forging. The correct choice of furnaces is also very important. We must reach correct temperature in the furnace for raw steel to melt with less scalings. In diploma I mentioned some machine...

  5. Initial results of strand produced in Phase 2 of the SSCL Vendor Qualification Program

    International Nuclear Information System (INIS)

    Erdmann, M.; Capone, D. II; Coleman, S.; Jones, B.; Seuntjens, J.

    1993-05-01

    In 1991, the Superconducting Super Collider Laboratory (SSCL) instituted a program to qualify specific superconductor manufacturers for production of cable acceptable for use in both Collider Dipole (CDM) and Quadrupole (CQM) magnets. The SSCL Vendor Qualification Program (VQP) was designed with two Phases. Phase 1 was divided into two additional phases, 1A and 1B, which ran concurrently. In Phase 1B, each vendor was directed to manufacture roughly 3000 kg of cable using a ''baseline'' process. The baseline process was agreed to by both the SSCL and the vendor at the beginning of the VQP. In this phase, process control was closely monitored with the use of statistical methods and each vendor was graded based on these results. Phase 1A, known as the R ampersand D phase, was developed to allow each vendor an opportunity to optimize and improve on their baseline process in terms of both cost and manufacturability. In this phase, multifilament billets were designed to explore several key variables such as alternate alloy sources, process modifications and improved billet designs. At the end of Phase 1, the results from both 1A and 1B were evaluated at a review between the SSCL and each vendor, and a final Phase 2 process was generated and fixed using the best results. In Phase 2, each vendor is required to manufacture roughly 6000 kg of superconducting cable under a firm fixed price contract which can then be used to create an accurate price estimate for competitive bidding on the full rate production CDM and CQM contracts. At the end of Phase 2, each vendor must meet the minimum requirements outlined in the contract to become a qualified superconducting cable supplier. For one requirement, critical process variables identified by the SSCL Conductor Department at the beginning of the VQP will be evaluated to determine the quality and uniformity of the material produced during Phase 2 of the program

  6. Comparison study of multistep forging and injection forging of automobile fasteners

    OpenAIRE

    Chen Senyong; Qin Yi

    2015-01-01

    In order to improve production efficiency, injection forging as a feasible approach was introduced to automobile fasteners production. In the study reported in this paper, two forging approaches, traditional multistep forging and injection forging, were analysed by using a finite element method. Using ABAQUS and DEFORM, some significant factors, namely, forging force, energy consumption, component accuracy and stress distribution in the die, were compared to explore the potential and challeng...

  7. Forging Long Shafts On Disks

    Science.gov (United States)

    Tilghman, Chris; Askey, William; Hopkins, Steven

    1989-01-01

    Isothermal-forging apparatus produces long shafts integral with disks. Equipment based on modification of conventional isothermal-forging equipment, required stroke cut by more than half. Enables forging of shafts as long as 48 in. (122 cm) on typical modified conventional forging press, otherwise limited to making shafts no longer than 18 in. (46cm). Removable punch, in which forged material cools after plastic deformation, essential novel feature of forging apparatus. Technology used to improve such products as components of gas turbines and turbopumps and of other shaft/disk parts for powerplants, drive trains, or static structures.

  8. Precision forging technology for aluminum alloy

    Science.gov (United States)

    Deng, Lei; Wang, Xinyun; Jin, Junsong; Xia, Juchen

    2018-03-01

    Aluminum alloy is a preferred metal material for lightweight part manufacturing in aerospace, automobile, and weapon industries due to its good physical properties, such as low density, high specific strength, and good corrosion resistance. However, during forging processes, underfilling, folding, broken streamline, crack, coarse grain, and other macro- or microdefects are easily generated because of the deformation characteristics of aluminum alloys, including narrow forgeable temperature region, fast heat dissipation to dies, strong adhesion, high strain rate sensitivity, and large flow resistance. Thus, it is seriously restricted for the forged part to obtain precision shape and enhanced property. In this paper, progresses in precision forging technologies of aluminum alloy parts were reviewed. Several advanced precision forging technologies have been developed, including closed die forging, isothermal die forging, local loading forging, metal flow forging with relief cavity, auxiliary force or vibration loading, casting-forging hybrid forming, and stamping-forging hybrid forming. High-precision aluminum alloy parts can be realized by controlling the forging processes and parameters or combining precision forging technologies with other forming technologies. The development of these technologies is beneficial to promote the application of aluminum alloys in manufacturing of lightweight parts.

  9. Properties of powder metallurgy steel forgings

    International Nuclear Information System (INIS)

    Crowson, A.; Anderson, F.E.

    1977-01-01

    The effects of processing variables on the mechanical properties of heat-treated powder metallurgy (P/M) steel forgings were determined. Prealloyed 4600 steel powder blended with graphite to yield 4640 was compacted into preforms and hot forged in a warm, closed die. Variables studied were preform density, method of lubrication, preform sintering (time, temperature and atmosphere), forging pressure (20 and 40 tsi) and temperature (1850 0 F, 2000 0 F and 2200 0 F), and forging ratio (0.75 and 0.95). Relationships between interconnected porosity and total porosity for the various preform densities were determined. High density compacts required higher sintering temperatures due to the restricted mobility of the reducing gases in the pores. Die wall lubrication was comparable to admixed lubrication, and it simplified powder mixing and preform sintering operations. Forgings with densities from 99 to 99.8 percent of theoretical density were attained with a forging pressure of 20 to 40 tsi and preform temperatures of 2000 0 F and above. At forging conditions which resulted in forgings with acceptable mechanical properties, complete die fill was accomplished at a forging ratio of 0.95, whereas incomplete die fill resulted at a forging ratio of 0.75. The response of P/M forgings to heat treatment was comparable to that for wrought materials, and the resultant tensile and yield strengths were equivalent to the strength values described for wrought 4640 steel in AMS specification 6317B. In addition, ductility and impact properties of P/M forgings with near theoretical density (99.5+ percent) were comparable to bar stock forgings

  10. Forging evaluaion of 304L stainless steel

    International Nuclear Information System (INIS)

    Packard, C.L.; Edstrom, C.M.

    1979-01-01

    The objective of this project was to evaluate and characterize the effects of various forging parameters on the metallographic structure and mechanical properties of 304L stainless steel forgings. Upset and die forgings were produced by hammer and Dynapak forging with forging temperatures ranging from 760 to 1145 0 C, upset reductions ranging from 20 to 60%, and annealing times ranging from 0 to 25 minutes at 843 0 C. The carbide precipitation behavior observed was found to be a function of forging temperature and annealing time. Higher forging temperatures were beneficial in avoiding continuous carbide precipitation and annealing at 843 0 C promoted increased carbide precipitation. The yield strength of the unannealed forgings decreased with increasing forging temperature and, with the exception of the 1145 0 C upset forgings, was significantly lowered by annealing

  11. Cross-vendor quality monitoring in a multi-vendor Internet of Things

    NARCIS (Netherlands)

    Holtman, K.J.G.

    2015-01-01

    This note discusses several problems and solutions in quality monitoring of Internet of Things, when multiple products (devices, apps,) from different vendors interact with each other. It presents a cross-vendor quality monitoring system, which helps each individual vendor discover problems and

  12. Library/vendor relationships

    CERN Document Server

    Brooks, Sam

    2014-01-01

    A view of the mutual dependence between libraries and vendorsAs technology advances, libraries are forced to reach beyond their own resources to find effective ways to maintain accuracy and superior service levels. Vendors provide databases and integrated library systems that perform those functions for profit. Library/Vendor Relationships examines the increasing cooperation in which libraries find they must participate in, and vice versa, with the vendors that provide system infrastructure and software. Expert contributors provide insights from all sides of this unique collaboration, offering

  13. Modelling of defects in ingot forging

    DEFF Research Database (Denmark)

    Christiansen, Peter

    The present report presents an investigation of the ingot forging process with special emphasis on modelling the influence of die geometry on the soundness of the ingot after hot forging. An investigation on how to model damage is also performed. The influence of the lower die angle is quantified...... angle of 130o-140o giving rise to the largest centreline porosity closure regardless of material hardening behaviour applied. Friction was found only to have minor influence on the optimum. Multi stroke forging operations have also been modelled since the ingot forging process consists of many forging...... damage. It is found that when evaluating damage only by relative density; feed size and lower die angle does not influence whether the hot forging process is successful or not. This is in disagreement with the general understanding of the ingot forging process. When evaluating ductile damage...

  14. Forging Industry Leadtimes: An Analysis of Causes for and Solutions to Long Leadtimes for Aerospace Forgings

    Science.gov (United States)

    1986-09-01

    Pamplet . Forging Industry Association, Cleveland-MT, uncatea. 20. Forging Industry Association, and American Society for Metals. Forging Handbook, edited... Pamplet . The Harris-Thomas Drop Forge Compnyayto--n R, undated. 43. Theeck, Michael F., TECH MOD Program Mana.er. Personal interview. Industrial Base... Brochure . Worcester MA, 3, . 125 "’ VITA Captain Stephen F. O’Neill was born on 19 June 1957 in Pittsfield, Massachusetts. He graduated from high school

  15. POLICY EVALUATION OF RESTRUCTURING STREET VENDORS IN SURAKARTA CITY (Study of Street Vendors in Monument Park Banjarsari and Street Vendors in Manahan Stadium

    Directory of Open Access Journals (Sweden)

    Frahlevi Prajasari

    2015-08-01

    Full Text Available This study examined the policy evaluation of restructuring street vendors in Surakarta city. Street vendors represent the economic actors in the informal sector of urban economic activity. The government of City/District usually removes these street vendors by disguising this activity behind the reason of structuring, . The study used descriptive research with a qualitative approach. The relocation of street vendors in Surakarta City is orderly and smooth without violence which may impact badly on physic and material because the government of Surakarta City, especially Surakarta Mayor, uses persuasive approach. Notoharjo Market is a relocation place for street vendors at Banjarsari Monument Park. In the beginning, Notoharjo Market is crowded with buyers but current days, street vendors who occupy Notoharjo Market complain about lack of buyers. The lack of buyers at Notoharjo Market is because the facilities previously provided by the government of Surakarta City are not well maintained. The government of Surakarta City must listening all complains of street vendors for the smoothness and orderliness of trading activity of street vendors. Not only listening, but the government of Surakarta City also gives appropriate and best solution to street vendors such that street vendors feel comfort in selling and their income is better than before.

  16. The influence of main parameters of the process of forging on the initial quality of forging for steel 35HM

    International Nuclear Information System (INIS)

    Banaszek, G.; Dyja, H.; Berski, S.

    2001-01-01

    The article discuss the effect of the main forging parameters and the selection of tools on improving the internal quality of forgings and closing up discontinuities of metallurgical origin during forging. As a result of investigations, the optimal values of the main technological parameters of forging have been determined and the application of an appropriate group of tools have been proposed for the flat die forging of forgings. (author)

  17. Microstructure Evolution and Surface Cracking Behavior of Superheavy Forgings during Hot Forging

    Directory of Open Access Journals (Sweden)

    Zhenhua Wang

    2018-01-01

    Full Text Available In recent years, superheavy forgings that are manufactured from 600 t grade ingots have been applied in the latest generation of nuclear power plants to provide good safety. However, component production is pushing the limits of the current free-forging industry. Large initial grain sizes and a low strain rate are the main factors that contribute to the deformation of superheavy forgings during forging. In this study, 18Mn18Cr0.6N steel with a coarse grain structure was selected as a model material. Hot compression and hot tension tests were conducted at a strain rate of 10−4·s−1. The essential nucleation mechanism of the dynamic recrystallization involved low-angle grain boundary formation and subgrain rotation, which was independent of the original high-angle grain boundary bulging and the presence of twins. Twins were formed during the growth of dynamic recrystallization grains. The grain refinement was not obvious at 1150°C. A lowering of the deformation temperature to 1050°C resulted in a fine grain structure; however, the stress increased significantly. Crack-propagation paths included high-angle grain boundaries, twin boundaries, and the insides of grains, in that order. For superheavy forging, the ingot should have a larger height and a smaller diameter.

  18. Microstructural and mechanical evolutions during the forging step of the COBAPRESS, a casting/forging process

    Science.gov (United States)

    Perrier, Frédéric; Desrayaud, Christophe; Bouvier, Véronique

    Aluminum casting/forging processes are used to produce parts for the automotive industry. In this study, we examined the influence of the forging step on the microstructure and the mechanical properties of an A356 aluminum alloy modified with strontium. Firstly, a design of samples which allows us to test mechanically the alloy before and after forging was created. A finite element analysis with the ABAQUS software predicts a maximum of strain in the core of the specimens. Observations with the EBSD technique confirm a more intense sub-structuration of the dendrite cells in this zone. Yield strength, ultimate tensile strength, elongation and fatigue lives were then improved for the casting/forging samples compared to the only cast specimens. The closure of the porosities and the improvement of the surface quality during the forging step enhance also the fatigue resistance of the samples.

  19. New Trends in Forging Technologies

    Science.gov (United States)

    Behrens, B.-A.; Hagen, T.; Knigge, J.; Elgaly, I.; Hadifi, T.; Bouguecha, A.

    2011-05-01

    Limited natural resources increase the demand on highly efficient machinery and transportation means. New energy-saving mobility concepts call for design optimisation through downsizing of components and choice of corrosion resistant materials possessing high strength to density ratios. Component downsizing can be performed either by constructive structural optimisation or by substituting heavy materials with lighter high-strength ones. In this context, forging plays an important role in manufacturing load-optimised structural components. At the Institute of Metal Forming and Metal-Forming Machines (IFUM) various innovative forging technologies have been developed. With regard to structural optimisation, different strategies for localised reinforcement of components were investigated. Locally induced strain hardening by means of cold forging under a superimposed hydrostatic pressure could be realised. In addition, controlled martensitic zones could be created through forming induced phase conversion in metastable austenitic steels. Other research focused on the replacement of heavy steel parts with high-strength nonferrous alloys or hybrid material compounds. Several forging processes of magnesium, aluminium and titanium alloys for different aeronautical and automotive applications were developed. The whole process chain from material characterisation via simulation-based process design to the production of the parts has been considered. The feasibility of forging complex shaped geometries using these alloys was confirmed. In spite of the difficulties encountered due to machine noise and high temperature, acoustic emission (AE) technique has been successfully applied for online monitoring of forging defects. New AE analysis algorithm has been developed, so that different signal patterns due to various events such as product/die cracking or die wear could be detected and classified. Further, the feasibility of the mentioned forging technologies was proven by means

  20. Safety of vendor-prepared foods: evaluation of 10 processing mobile food vendors in Manhattan.

    Science.gov (United States)

    Burt, Bryan M; Volel, Caroline; Finkel, Madelon

    2003-01-01

    Unsanitary food handling is a major public health hazard. There are over 4,100 mobile food vendors operating in New York City, and of these, approximately forty percent are processing vendors--mobile food units on which potentially hazardous food products are handled, prepared, or processed. This pilot study assesses the food handling practices of 10 processing mobile food vendors operating in a 38-block area of midtown Manhattan (New York City) from 43rd Street to 62nd Street between Madison and Sixth Avenues, and compares them to regulations stipulated in the New York City Health Code. Ten processing mobile food vendors located in midtown Manhattan were observed for a period of 20 minutes each. Unsanitary food handling practices, food storage at potentially unsafe temperatures, and food contamination with uncooked meat or poultry were recorded. Over half of all vendors (67%) were found to contact served foods with bare hands. Four vendors were observed vending with visibly dirty hands or gloves and no vendor once washed his or her hands or changed gloves in the 20-minute observation period. Seven vendors had previously cooked meat products stored at unsafe temperatures on non-heating or non-cooking portions of the vendor cart for the duration of the observation. Four vendors were observed to contaminate served foods with uncooked meat or poultry. Each of these actions violates the New York City Code of Health and potentially jeopardizes the safety of these vendor-prepared foods. More stringent adherence to food safety regulations should be promoted by the New York City Department of Health.

  1. Forging process design for risk reduction

    Science.gov (United States)

    Mao, Yongning

    In this dissertation, forging process design has been investigated with the primary concern on risk reduction. Different forged components have been studied, especially those ones that could cause catastrophic loss if failure occurs. As an effective modeling methodology, finite element analysis is applied extensively in this work. Three examples, titanium compressor disk, superalloy turbine disk, and titanium hip prosthesis, have been discussed to demonstrate this approach. Discrete defects such as hard alpha anomalies are known to cause disastrous failure if they are present in those stress critical components. In this research, hard-alpha inclusion movement during forging of titanium compressor disk is studied by finite element analysis. By combining the results from Finite Element Method (FEM), regression modeling and Monte Carlo simulation, it is shown that changing the forging path is able to mitigate the failure risk of the components during the service. The second example goes with a turbine disk made of superalloy IN 718. The effect of forging on microstructure is the main consideration in this study. Microstructure defines the as-forged disk properties. Considering specific forging conditions, preform has its own effect on the microstructure. Through a sensitivity study it is found that forging temperature and speed have significant influence on the microstructure. In order to choose the processing parameters to optimize the microstructure, the dependence of microstructure on die speed and temperature is thoroughly studied using design of numerical experiments. For various desired goals, optimal solutions are determined. The narrow processing window of titanium alloy makes the isothermal forging a preferred way to produce forged parts without forging defects. However, the cost of isothermal forging (dies at the same temperature as the workpiece) limits its wide application. In this research, it has been demonstrated that with proper process design, the die

  2. 29 CFR 1910.218 - Forging machines.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 5 2010-07-01 2010-07-01 false Forging machines. 1910.218 Section 1910.218 Labor... OCCUPATIONAL SAFETY AND HEALTH STANDARDS Machinery and Machine Guarding § 1910.218 Forging machines. (a... other identifier, for the forging machine which was inspected. (ii) Scheduling and recording the...

  3. The Library Automation Market: Why Do Vendors Fail? A History of Vendors and Their Characteristics.

    Science.gov (United States)

    Rush, James E.

    1988-01-01

    Documents the history of library automation from a business perspective, examining several topics relating to characteristics of vendors, the library automation marketplace, and the measurement of vendor performance and success. Tables list library automation system vendors and outline quantitative measures of vendor performance. (138 references)…

  4. Wear Analysis of Die Inserts in the Hot Forging Process of a Forked Type Forging Using Reverse Scanning Techniques

    Directory of Open Access Journals (Sweden)

    Łukasz Dworzak

    2017-12-01

    Full Text Available This article presents a wear analysis of die inserts used in the hot forging process of a forked forging (yoke, an element applied in steering systems of passenger vehicles. Studies involved the application of an original reverse scanning method intended for rapid and reliable wear analysis of forging tools (with complicated shape affording easy assessment without the need to dismount tools from the forging unit. The developed method involves analysis of progressive wear of forging tools based on measurements (scanning of forgings periodically collected from the process and constitutes a useful tool for measurement and testing. As the authors’ earlier works have demonstrated, the proposed new approach to analysis of tool wear with the application of reverse 3D scanning has proven successful in multiple instances in the case of axially symmetrical objects. The presented results of studies indicate that it is possible to utilize the expanded method to analyze the lifetime of forging tools, including tools with complex geometry. Application of the reverse scanning method allows for continuous and practical monitoring of the condition of forging tools over the course of the forging process and should have a positive impact on improving production output and reducing production costs.

  5. 48 CFR 225.7102 - Forgings.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Forgings. 225.7102 Section 225.7102 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF... Forgings. ...

  6. Reparation of damaged forging dies

    Directory of Open Access Journals (Sweden)

    Vukić Lazić

    2015-03-01

    Full Text Available The forging dies are in exploitation exposed to elevated temperatures and variable impact loads, both compressive and shear. Steels for manufacturing of these tools must endure those loads while maintaining mechanical properties and being resistant to wear and thermal fatigue. For those reasons, the alloyed steels are used for making the forging dies, though they have less weldability, because alloying increases proneness to hardening. Any reparatory hard facing (HF of the damaged dies would require the specially adjusted technology to the particular piece. In this paper reparatory hard facing of dies used for forging pieces in the automobile industry is considered. Prior to reparatory hard facing of the real tools, numerous experimental hard facings on models were performed. All the model hard facings were done on the same steels which were used for production of the real forging dies. To define the optimal hard facing technology one needs to derive the optimal combination of the adequate heat treatment(s, to select the proper filler metals and the welding procedure. The established optimal HF technology was applied to real forging dies whose service life was further monitored in conditions of exploitation

  7. Forging of Advanced Disk Alloy LSHR

    Science.gov (United States)

    Gabb, Timothy P.; Gayda, John; Falsey, John

    2005-01-01

    The powder metallurgy disk alloy LSHR was designed with a relatively low gamma precipitate solvus temperature and high refractory element content to allow versatile heat treatment processing combined with high tensile, creep and fatigue properties. Grain size can be chiefly controlled through proper selection of solution heat treatment temperatures relative to the gamma precipitate solvus temperature. However, forging process conditions can also significantly influence solution heat treatment-grain size response. Therefore, it is necessary to understand the relationships between forging process conditions and the eventual grain size of solution heat treated material. A series of forging experiments were performed with subsequent subsolvus and supersolvus heat treatments, in search of suitable forging conditions for producing uniform fine grain and coarse grain microstructures. Subsolvus, supersolvus, and combined subsolvus plus supersolvus heat treatments were then applied. Forging and subsequent heat treatment conditions were identified allowing uniform fine and coarse grain microstructures.

  8. Role of forgings in powder metallurgy industry

    International Nuclear Information System (INIS)

    Hayes, A.F.; DeRidder, A.J.

    1975-01-01

    Forging of powder metallurgy materials is discussed. Information and data are included on forging powder metallurgy W, Mo, In 100, Rene 95, Astroloy, Be, and Ti. It is noted that the combination of powder metallurgy and forging work provides the best product from standpoints of reproducibility, freedom from segregation, low scrap rate, and uniform mechanical properties. Experience is being used to develop contour forging from hot isostatic pressed billets or preforms. The quality of this product is under evaluation. Results show steady improvement and it is anticipated that continued effort will soon produce a reliable, less costly product. Forging can continue to be relied upon to correct subtle defects present in powder metallurgy material

  9. Forging loads, deformation modes and fracture in axi-symmetrric closed die cold forging of sintered aluminium powder compacts

    International Nuclear Information System (INIS)

    Butt, M.A.; Ali, L.

    2003-01-01

    An experimental investigation into closed-die cold forging of sintered aluminium powder rod- shaped compacts was carried out. Axi-symmetric components were forged from sintered powder preforms with different initial diameter to height ratios. Different compaction pressures, sintering and lubrication conditions were used as variables during the investigations. Detailed observations were made on green/sintered density, compaction defects, forging loads, deformation modes and on the onset of fracture during progressive forging of sintered powder compacts. Experimental results obtained during the investigations have been presented and discussed in detail. (author)

  10. Recent technological developments in forging; Recentes avancos tecnologicos no forjamento

    Energy Technology Data Exchange (ETDEWEB)

    Schaeffer, Lirio [Rio Grande do Sul Univ., Porto Alegre, RS (Brazil). Programa de Pos-graduacao em Engenharia Metalurgica e dos Materiais

    1987-12-31

    Recent advances in the area of open and closed die forging are summarized and discussed. The use of computer and alternatives such as incremental forging, sinter forging, liquid forging and precision forging are the main items reviewed 11 refs., 10 figs.

  11. Heavy forgings for reactor pressure vessels

    International Nuclear Information System (INIS)

    Cerjak, H.; Papouschek, F.

    1979-01-01

    The importance of forgings for an optimal design of nuclear components is described. Problems concerning the correlation of requirements, material behavior, fabrication and testing of forgings are discussed. (orig.) [de

  12. Allegheny County Tobacco Vendors

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — The tobacco vendor information provides the location of all tobacco vendors in Allegheny County in 2015. Data was compiled from administrative records managed by...

  13. Forging technology for large nuclear pressure vessel parts

    International Nuclear Information System (INIS)

    Kakimoto, Hideki; Ikegami, Tomonori

    2014-01-01

    The increasing output of nuclear power generation calls for larger vessels for next-generation nuclear power plants. A vessel with an increased diameter requires increased load for its forging, which can make it difficult to use a conventional solid die. In order to reduce the forging load, a rotary incremental forging method has been applied to hot forging. This method includes pressing and rotating a material in an incremental manner such that a target shape is obtained. This study aimed at improving the accuracy of numerical simulation for the rotary incremental forging to reduce the load when forging large vessels. This has enabled the temperature of the material and flow stress to be precisely predicted; an example of this is reported in the paper. Specifically, the heat transfer coefficient to be used for the numerical simulation had been determined experimentally from a small-scale hot-forging. The reduction of the flow stress associated with incremental forging, had been deduced from a compression test, and the value was applied to the numerical simulation. A preform was designed on the basis of the above simulation to perform a 1/1 size scale experiment. A precision of better than 5% has been confirmed for the shape prediction. (author)

  14. Development and production of nuclear valves. Forging and welding. Pt. 2

    International Nuclear Information System (INIS)

    Bernal Castro, J.B.; Perez, J.C.; Labonia, R.N.

    1987-01-01

    The first part of this work deals with the obtainment of the austenitic stainless steel DIN 1.4541 (AISI 321) stabilized titanium for Atucha II nuclear valves. The second part presented herein, continued with the development process and part of the production of the bodies' forging and valves leads. This development has been also carried out in the country and a detailed set up of the process with its corresponding Inspection and Assay Program was needed. The last part of this stage has been initiated at the welding process, so it was necessary to develop specific welding procedures to qualify them and use the equipment specially applied to this requirement. The set of assays and criteria certification for the qualifications is presented. (Author)

  15. Assessing mobile food vendors (a.k.a. street food vendors)--methods, challenges, and lessons learned for future food-environment research.

    Science.gov (United States)

    Lucan, S C; Varona, M; Maroko, A R; Bumol, J; Torrens, L; Wylie-Rosett, J

    2013-08-01

    Mobile food vendors (also known as street food vendors) may be important sources of food, particularly in minority and low-income communities. Unfortunately, there are no good data sources on where, when, or what vendors sell. The lack of a published assessment method may contribute to the relative exclusion of mobile food vendors from existing food-environment research. A goal of this study was to develop, pilot, and refine a method to assess mobile food vendors. Cross-sectional assessment of mobile food vendors through direct observations and brief interviews. Using printed maps, investigators canvassed all streets in Bronx County, NY (excluding highways but including entrance and exit ramps) in 2010, looking for mobile food vendors. For each vendor identified, researchers recorded a unique identifier, the vendor's location, and direct observations. Investigators also recorded vendors answers to where, when, and what they sold. Of 372 identified vendors, 38% did not answer brief-interview questions (19% were 'in transit', 15% refused; others were absent from their carts/trucks/stands or with customers). About 7% of vendors who ultimately answered questions were reluctant to engage with researchers. Some vendors expressed concerns about regulatory authority; only 34% of vendors had visible permits or licenses and many vendors had improvised illegitimate-appearing set-ups. The majority of vendors (75% of those responding) felt most comfortable speaking Spanish; 5% preferred other non-English languages. Nearly a third of vendors changed selling locations (streets, neighbourhoods, boroughs) day-to-day or even within a given day. There was considerable variability in times (hours, days, months) in which vendors reported doing business; for 86% of vendors, weather was a deciding factor. Mobile food vendors have a variable and fluid presence in an urban environment. Variability in hours and locations, having most comfort with languages other than English, and reluctance

  16. International cooperation in cold forging technology

    DEFF Research Database (Denmark)

    Bay, Niels; Lange, K

    1992-01-01

    International cooperation in the field of cold forging technology started in 1961 by formation of the OECD Group of Experts on Metal Forming. In 1967 this group was transformed into the International Cold Forging Group, ICFG, an independent body which has now been operative for 25 years. Members...... of the ICFG are personally elected by the Plenary as experts within the field, often representing national groups within cold forging. The main work within the ICFG is carried out in its subgroups which are established by the Plenary to collect, compile and evaluate data and eventually also produce data...... by cooperative activities or by instigating national research. These subgroups have produced 9 data sheets and 7 guidelines on subjects such as materials, tool design and construction, calculation methods for cold forging tools, manufacture of slugs, lubrication aspects and small quantity production. Plenary...

  17. Hot forging of roll-cast high aluminum content magnesium alloys

    Science.gov (United States)

    Kishi, Tomohiro; Watari, Hisaki; Suzuki, Mayumi; Haga, Toshio

    2017-10-01

    This paper reports on hot forging of high aluminum content magnesium alloy sheets manufactured using horizontal twin-roll casting. AZ111 and AZ131 were applied for twin-roll casting, and a hot-forging test was performed to manufacture high-strength magnesium alloy components economically. For twin-roll casting, the casting conditions of a thick sheet for hot forging were investigated. It was found that twin-roll casting of a 10mm-thick magnesium alloy sheet was possible at a roll speed of 2.5m/min. The grain size of the cast strip was 50 to 70µm. In the hot-forging test, blank material was obtained from as-cast strip. A servo press machine with a servo die cushion was used to investigate appropriate forging conditions (e.g., temperature, forging load, and back pressure) for twin-roll casts (TRCs) AZ111 and AZ131. It was determined that high aluminum content magnesium alloy sheets manufactured using twin-roll casting could be forged with a forging load of 150t and a back pressure of 3t at 420 to 430°C. Applying back pressure during hot forging effectively forged a pin-shaped product.

  18. Assessing mobile food vendors (a.k.a. street food vendors)—methods, challenges, and lessons learned for future food-environment research

    Science.gov (United States)

    Lucan, Sean C.; Varona, Monica; Maroko, Andrew R.; Bumol, Joel; Torrens, Luis; Wylie-Rosett, Judith

    2013-01-01

    OBJECTIVES Mobile food vendors (also known as street food vendors) may be important sources of food, particularly in minority and low-income communities. Unfortunately, there are no good data sources on where, when, or what vendors sell. The lack of a published assessment method may contribute to the relative exclusion of mobile food vendors from existing food-environment research. A goal of this study was to develop, pilot, and troubleshoot a method to assess mobile food vendors. STUDY DESIGN Cross-sectional assessment of mobile food vendors through direct observations and brief interviews. METHODS Using printed maps, investigators canvassed all streets in Bronx County, NY (excluding highways but including entrance and exit ramps) in 2010, looking for mobile food vendors. For each vendor identified, researchers recorded a unique identifier, the vendor’s location, and direct observations. Investigators also recorded vendors answers to where, when, and what they sold. RESULTS Of 372 identified vendors, 38% did not answer brief-interview questions (19% were “in transit”, 15% refused; others were absent from their carts/trucks/stands or with customers). About 7% of vendors who ultimately answered questions were reluctant to engage with researchers. Some vendors expressed concerns about regulatory authority; only 34% of vendors had visible permits or licenses and many vendors had improvised illegitimate-appearing set-ups. The majority of vendors (75% of those responding) felt most comfortable speaking Spanish; 5% preferred other non-English languages. Nearly a third of vendors changed selling locations (streets, neighborhoods, boroughs) day-to-day or even within a given day. There was considerable variability in times (hours, days, months) in which vendors reported doing business; for 86% of vendors, weather was a deciding factor. CONCLUSIONS Mobile food vendors have a variable and fluid presence in an urban environment. Variability in hours and locations, having

  19. Quick scan IMS vendors

    NARCIS (Netherlands)

    Norp, A.H.J.; Pals, H.; Walraven, F.A.

    2007-01-01

    IMS is gaining momentum in the market. First operators are deploying IMS, while other operators are considering buying IMS. Operators have two approaches for introducing IMS and building an IMS eco-system: • Buying IMS from a large vendor or system integrator. Vendors like Alcatel-Lucent, Ericsson

  20. Safety of vendor-prepared foods: evaluation of 10 processing mobile food vendors in Manhattan.

    OpenAIRE

    Burt, Bryan M.; Volel, Caroline; Finkel, Madelon

    2003-01-01

    OBJECTIVES: Unsanitary food handling is a major public health hazard. There are over 4,100 mobile food vendors operating in New York City, and of these, approximately forty percent are processing vendors--mobile food units on which potentially hazardous food products are handled, prepared, or processed. This pilot study assesses the food handling practices of 10 processing mobile food vendors operating in a 38-block area of midtown Manhattan (New York City) from 43rd Street to 62nd Street bet...

  1. Press forging and optical properties of lithium fluoride

    Science.gov (United States)

    Ready, J. F.; Vora, H.

    1980-07-01

    Lithium fluoride is an important candidate material for windows on high power, short-pulse ultraviolet and visible lasers. Lithium fluoride crystals were press forged in one step over the temperature range 300 to 600 C to obtain fine grained polycrystalline material with improved mechanical properties. The deformation that can be given to a lithium fluoride crystal during forging is limited by the formation of internal cloudiness (veiling) with the deformation limit increasing with increasing forging temperature from about 40 percent at 400 C to 65 percent at 600 C. To suppress veiling, lithium fluoride crystals were forged in two steps over the temperature range 300 to 600 C, to total deformations of 69 to 76 percent, with intermediate annealing at 700 C. This technique yields a material which has lower scattering with more homogeneous microstructure than that obtained in one step forging. The results of characterization of various optical and mechanical properties of single crystal and forged lithium fluoride, including scattering, optical homogeneity, residual absorption, damage thresholds, environmental stability, and thresholds for microyield are described.

  2. Press forging and optical properties of lithium fluoride

    International Nuclear Information System (INIS)

    Ready, J.F.; Vora, H.

    1979-01-01

    Lithium fluoride is an important candidate material for windows on high-power, short-pulse ultraviolet and visible lasers. Lithium fluoride crystals have been press forged in one step over the temperature range 300 to 600 0 c to obtain fine-grained polycrystalline material with improved mechanical properties. The deformation that can be given to a lithium fluoride crystal during forging is limited by the formation of internal cloudiness (veiling) with the deformation limit increasing with increasing forging temperature from about 40% at 400 0 C to 65% at 600 0 C. To suppress veiling, lithium fluoride crystals were forged in two steps over the temperature range 300 to 600 0 C, to total deformations of 69-76%, with intermediate annealing at 700 0 C. This technique yields a material which has lower scattering with more homogeneous microstructure than that obtained in one-step forging. The results of characterization of various optical and mechanical properties of single-crystal and forged lithium fluoride, including scattering, optical homogeneity, residual absorption, damage thresholds, environmental stability, and thresholds for microyield are described

  3. Vendor-managed inventory

    DEFF Research Database (Denmark)

    Govindan, Kannan

    2013-01-01

    Vendor-managed inventory (VMI) represents the methodology through which the upstream stage of a supply chain (vendor) takes responsibility for managing the inventories at the downstream stage (customer) based on previously agreed limits. VMI is another method by which supply chains can be managed...... review, we have identified six dimensions of VMI: namely, inventory, transportation, manufacturing, general benefits, coordination/collaboration, and information sharing. In addition, there are, three methodological classifications: modelling, simulation, and case studies. Finally, we will consider...

  4. Quality assurance for hammer forgings

    International Nuclear Information System (INIS)

    Potthast, E.

    1984-01-01

    The quality assurance program introduced by Arbed Saarstahl and laid down in a quality assurance manual is described. A particular attention is attached thereby both to quality practice proper and to a reliable flow of information amongst all the persons involved. The production and test sequence schedules of the hammer forging plant are illustrated by the example of a forged valve housing for nuclear power plants. These schedules specify not only the forging process in the individual production stages but also the workpiece contour after each working operation, the heat treatment, the furnace charging, and the inspection of finished parts. The formalization of the tests is designed both to promote the customer's trust towards the supplier and to prevent the formal operations involved from hindering further technical development. (orig.) [de

  5. Co-Operative Training in the Sheffield Forging Industry

    Science.gov (United States)

    Duncan, R.

    2008-01-01

    Purpose: The purpose of this paper is to give details of an operation carried out in Sheffield to increase the recruitment of young men into the steel forging industry. Design/methodology/approach: The Sheffield Forges Co-operative Training Scheme was designed to encourage boys to enter the forging industry and to provide them with training and…

  6. Development of integral type forgings for steam generator of nuclear power plant

    International Nuclear Information System (INIS)

    Suzuki, Komei; Sato, Ikuo; Murai, Etsuo

    1992-01-01

    The use of integral type steel forgings for the construction of pressure vessel enhances the structural integrity of components and makes the fabrication of components and the execution of in-service inspection (ISI) easier than those fabrication from plate and casting materials. Such steel forgings have been realized for steam generator (SG) for nuclear power plant as follows : (1) Forged shell ring : change from welding fabrication of formed plates to forging ; (2) Forged conical shell ring : ditto ; (3) Forged head integral with nozzles (s) : (i) Primary head : change from casting to forging ; (ii) Secondary head : change from welding fabrication of formed plates to forging. These steel forgings have been realized by recent development in manufacturing technologies, such as steel making, forging processes and heat treatment which are vital to the quality of steel forgings. Some examples of recent typical high quality steel forgings developed by the Japan Steel Works, Ltd. (JSW) are introduced, and the main points of the manufacturing technique and the quality attained are also described. (author)

  7. Phased Array Ultrasonic Inspection of Titanium Forgings

    International Nuclear Information System (INIS)

    Howard, P.; Klaassen, R.; Kurkcu, N.; Barshinger, J.; Chalek, C.; Nieters, E.; Sun, Zongqi; Fromont, F. de

    2007-01-01

    Aerospace forging inspections typically use multiple, subsurface-focused sound beams in combination with digital C-scan image acquisition and display. Traditionally, forging inspections have been implemented using multiple single element, fixed focused transducers. Recent advances in phased array technology have made it possible to perform an equivalent inspection using a single phased array transducer. General Electric has developed a system to perform titanium forging inspection based on medical phased array technology and advanced image processing techniques. The components of that system and system performance for titanium inspection will be discussed

  8. 22 CFR 121.10 - Forgings, castings and machined bodies.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Forgings, castings and machined bodies. 121.10... STATES MUNITIONS LIST Enumeration of Articles § 121.10 Forgings, castings and machined bodies. Articles on the U.S. Munitions List include articles in a partially completed state (such as forgings...

  9. Kinematics at the Main Mechanism of a Railbound Forging Manipulator

    Directory of Open Access Journals (Sweden)

    Florian Ion Tiberiu Petrescu

    2015-09-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Heavy payload forging manipulators are mainly characterized by large load output and large capacitive load input. The relationship between outputs and inputs will greatly influence the control and the reliability. Forging manipulators have become more prevalent in the industry today. They are used to manipulate objects to be forged. The most common forging manipulators are moving on a railway to have a greater precision and stability. They have been called the railbound forging manipulators. In this paper we analyze the general kinematics of the main mechanism from a such manipulator. Kinematic scheme shows a typical forging manipulator, with the basic motions in operation process: walking, motion of the tong and buffering. The lifting mechanism consists of several parts including linkages, hydraulic drives and motion pairs. The principle of type design from the viewpoints of the relationship between output characteristics and actuator inputs is discussed. An idea of establishing the incidence relationship between output characteristics and actuator inputs is proposed. These novel forging manipulators which satisfy certain functional requirements provide an effective help for the design of forging manipulators.

  10. Study on the isothermal forging process of MB26 magnesium alloy adaptor

    Directory of Open Access Journals (Sweden)

    Xu Wenchen

    2015-01-01

    Full Text Available The isothermal forging process is an effective method to manufacture complex-shaped components of hard-to-work materials, such as magnesium alloys. This study investigates the isothermal forging process of an MB26 magnesium alloy adaptor with three branches. The results show that two-step forging process is appropriate to form the adaptor forging, which not only improves the filling quality but also reduces the forging load compared with one-step forging process. Moreover, the flow line is distributed along the contour of the complex-shaped adaptor forging.

  11. Near-Net Forging Technology Demonstration Program

    Science.gov (United States)

    Hall, I. Keith

    1996-01-01

    Significant advantages in specific mechanical properties, when compared to conventional aluminum (Al) alloys, make aluminum-lithium (Al-Li) alloys attractive candidate materials for use in cryogenic propellant tanks and dry bay structures. However, the cost of Al-Li alloys is typically five times that of 2219 aluminum. If conventional fabrication processes are employed to fabricate launch vehicle structure, the material costs will restrict their utilization. In order to fully exploit the potential cost and performance benefits of Al-Li alloys, it is necessary that near-net manufacturing methods be developed to off-set or reduce raw material costs. Near-net forging is an advanced manufacturing method that uses elevated temperature metal movement (forging) to fabricate a single piece, near-net shape, structure. This process is termed 'near-net' because only a minimal amount of post-forge machining is required. The near-net forging process was developed to reduce the material scrap rate (buy-to-fly ratio) and fabrication costs associated with conventional manufacturing methods. The goal for the near-net forging process, when mature, is to achieve an overall cost reduction of approximately 50 percent compared with conventional manufacturing options for producing structures fabricated from Al-Li alloys. This NASA Marshall Space Flight Center (MSFC) sponsored program has been a part of a unique government / industry partnership, coordinated to develop and demonstrate near-net forging technology. The objective of this program was to demonstrate scale-up of the near-net forging process. This objective was successfully achieved by fabricating four integrally stiffened, 170- inch diameter by 20-inch tall, Al-Li alloy 2195, Y-ring adapters. Initially, two 2195 Al-Li ingots were converted and back extruded to produce four cylindrical blockers. Conventional ring rolling of the blockers was performed to produce ring preforms, which were then contour ring rolled to produce

  12. 27 CFR 447.22 - Forgings, castings, and machined bodies.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Forgings, castings, and... IMPLEMENTS OF WAR The U.S. Munitions Import List § 447.22 Forgings, castings, and machined bodies. Articles on the U.S. Munitions Import List include articles in a partially completed state (such as forgings...

  13. The State of the Art in Cold Forging Lubrication

    DEFF Research Database (Denmark)

    Bay, Niels

    1994-01-01

    The manufature of components in steel, aluminium and copper alloys by cold forging production has increased ever since the 1950's. Typical processes are forward rod extrusion and backward can extrusion, upsetting, ironing, tube extrusion and radial extrusion. The tribological conditions in cold...... forging are extremely severe due to large surface expansion and normal pressure in the tool/workpiece interface combined with elevated tool temperatures. Except for the more simple cold forging operations successful production therefore requires advanced lubrication systems. The present paper gives...... a detailed description of the state of art for lubricant systems for cold forging of C-steels and low alloy steels as well as aluminium alloys including all the basic operations such as cleaning of the slugs, application of eventual conversion coating and lubrication. As regards cold forging of steel...

  14. Vendor Managed Consignment Inventory (Vmci) Model For Single Vendor Multi Retailers Under Probabilistic

    OpenAIRE

    Rosyida, Erly Ekayanti; Pujawan, I Nyoman; Kurniati, Nani

    2015-01-01

    Vendor managed consignment inventory (VMCI) adalah suatu strategi kolaborasi yang terjalin diantara pihak-pihak yang terkait dalam supply chain, dimana vendor sebagai supplier mempunyai wewenang untuk memutuskan order quantity yang harus dikirimkan ke buyernya serta menjadi pemilik barang tersebut sampai barang tersebut terjual atau dipakai. Integrasi pada sistem supply chain ini terjadi karena adanya information sharing dan business process reengineering. Pada penelitian ini akan dilakukan a...

  15. Instant forgedUI starter

    CERN Document Server

    Luiz, Joseandro

    2013-01-01

    Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks.The book is a Starter guide to learning ForgedUI. This book will start by unfolding the installation and creating a simple application using Titanium and ForgedUI, followed by taking you through the features to model an engaging UI and generate multi-platform code with Titanium, while covering the best design practice for Apple and Android application development. Last but not least, you will also come across the available resources where you can

  16. An empirical model for friction in cold forging

    DEFF Research Database (Denmark)

    Bay, Niels; Eriksen, Morten; Tan, Xincai

    2002-01-01

    With a system of simulative tribology tests for cold forging the friction stress for aluminum, steel and stainless steel provided with typical lubricants for cold forging has been determined for varying normal pressure, surface expansion, sliding length and tool/work piece interface temperature...... of normal pressure and tool/work piece interface temperature. The model is verified by process testing measuring friction at varying reductions in cold forward rod extrusion. KEY WORDS: empirical friction model, cold forging, simulative friction tests....

  17. 40 CFR 467.40 - Applicability; description of the forging subcategory.

    Science.gov (United States)

    2010-07-01

    ... forging subcategory. 467.40 Section 467.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ALUMINUM FORMING POINT SOURCE CATEGORY Forging Subcategory § 467.40 Applicability; description of the forging subcategory. This subpart applies to discharges of...

  18. Die forging of the alloys Az80 and Zk60

    NARCIS (Netherlands)

    Kurz, G.; Clauw, B.; Sillekens, W.H.; Letzig, D.

    2009-01-01

    Overall goal of the MagForge project is to provide tailored and cost-effective technologies for the industrial manufacturing of magnesium forged components. Scientific and technological aspects are new alloys/feedstock materials with improved performance, forging process modeling and design tools

  19. Sintering and densification; new techniques: sinter forging

    International Nuclear Information System (INIS)

    Winnubst, A.J.A.

    1998-01-01

    In this chapter pressure assisted sintering methods will be described. Attention will mainly be paid to sinter forging as a die-wall free uniaxial pressure sintering technique, where large creep strains are possible. Sinter forging is an effective tool to reduce sintering temperature and time and to obtain a nearly theoretically dense ceramic. In this way grain size in tetragonal zirconia ceramics can be reduced down to 100 nm. Another important phenomenon is the reduction of the number density and size of cracks and flaws resulting in higher strength and improved reliability, which is of utmost importance for engineering ceramics. The creep deformation during sinter forging causes a rearrangement of the grains resulting in a reduction of interatomic spaces between grains, while grain boundary (glassy) phases can be removed. The toughness and in some cases the wear resistance is enhanced after sinter forging as a result of the grain-boundary-morphology improvement. (orig.)

  20. A-508 class 3 forgings for pressure vessels

    International Nuclear Information System (INIS)

    Comon, J.

    1977-01-01

    The manufacture of the forged parts of the first PWR nuclear pressure vessel installed in France started in the Creusot-Loire's Forge Plant in 1961. Since this date, more than 300 forgings of this type were delivered (flanges, rings, zones, and nozzles). The major part of these forgings were made of Mn, Ni, Mo steel (SA 508 class 3). They represent a population large and homogeneous enough to attempt a statistical analysis of chemical and mechanical test results. The aim of this analysis was double: (1) a better knowledge of the scattering of the results and a better estimate of what can be introduced or accepted in a specification, and (2) the setting up of correlations existing between these results, particularly between chemical analysis and mechanical test results. In addition to this statistical analysis concerning industrial results, several laboratory studies are presented, giving a more complete characterization of SA 508 class 3. All these results form a very complete documentation showing that SA 508 class 3 steel is suitable for the manufacture of large forged vessels requiring a high degree of reliability

  1. Secure vendor environment (SVE) for PACS

    Science.gov (United States)

    Honeyman-Buck, Janice; Frost, Meryll

    2005-04-01

    A Secure Vendor Environment (SVE) was created to protect radiology modalities from network intrusion, worms, viruses, and other forms of damaging attacks. Many vendors do not attempt any form of network security and if an institution demands a non-standard and secure installation, a future system upgrade could and frequently does eliminate any security measures installed during the initial installation. The SVE isolates the vendor equipment behind a virtual firewall on a private network that is invisible to the outside world. All interactions must go though a device containing two network interface cards called an Application Processor that acts as a store-and forward router, performs DICOM repair, proxies modality worklist, and isolates the vendor modalities. A small VPN appliance can open the device temporarily for remote access by vendor engineers. Prior to the routine installation of the SVE, vendor equipment was often attacked by hostile network intruders and viruses or worms, sometimes rendering the equipment unusable until the vendor could reload the system. The resulted in considerable clinical downtime and loss of revenue. Since the relatively low cost SVE solution has routinely been installed with all new equipment, no intrusions have occurred, although our network sniffers and intrusion detectors indicate that we are constantly being scanned for vulnerability. Purpose: To provide a secure network for vendor equipment in a PACS environment while allowing vendor access for upgrades and system repairs. Method: The network administrators at our university believe that network security should be implemented at the machine level rather than relying on a firewall. A firewall solution could conceivably block unwanted intrusion from outside the university network, but would still allow literally thousands of potential network users to get through to the PACS network. All the PACS archive, display and routing systems are individually protected from intrusion, but

  2. Responding to an RFP: A Vendor's Viewpoint.

    Science.gov (United States)

    Kington, Robert A.

    1987-01-01

    Outlines factors used by online vendors to decide whether to bid on RFPs (requests for proposals) for library automation systems, including specifications for software, hardware or performance requirements not met by the vendor; specifications based on competitors' systems; the size and complexity of the request itself; and vendors' time…

  3. Why I Love Vendors

    Energy Technology Data Exchange (ETDEWEB)

    Wiley, H. S.

    2010-02-01

    In December, I attended the annual meeting of the American Society for Cell Biology, as I have done regularly for the last several decades. It is always a good way to catch up with old friends and look for the latest trends in cell biology. I rarely attend the talks, having found that they more reflect the fashion of the moment (or the past) than the direction of the field. Poster sessions are more to my liking, since they provide a chance to talk to enthusiastic young scientists in the trenches. But my favorite stop has always been the vendor booths. When I tell my friends that I love visiting vendor booths, most of them seem to think I am kidding. At meetings, many scientists seem to feel that vendors are necessary evils. They provide free candy and cheap pens in exchange for bombarding us with ads and scanning our badges. Like popup ads in web browsers, we have learned to both ignore and accept them as part of the landscape. It is unfortunate that we have become so inured to their presence. Talks and posters capture exciting research from the last few years or months, but vendor booths capture the future, offering one of the clearest visions of where a field is going.

  4. Effect of Laser Preheating AISI 4140 Specimens for Micro-Forging

    Directory of Open Access Journals (Sweden)

    Jung C.

    2017-06-01

    Full Text Available Many high performance and permanent service parts require suitable material characteristics-high fatigue strength is one of the most important characteristics. For this reason, surface treatment processes are essential to increase the material performance and avoid the use of costly ineffective material. There exist various surface treatment processes for various applications. Each process has advantages and disadvantages and hybridization can solve various problems. The micro-forging process delivers a controlled and uniform surface hardness, but the depth of the forged surface is limited. On the other hand, laser heat treatment can increase the hardness drastically, but the surface may become brittle, which reduces the fatigue life. Laser-assisted micro-forging is a novel hybrid process of laser heat treatment and micro-forging that has the potential to increase the forging depth and relax the stress caused by the high temperature of the forging process.

  5. 48 CFR 252.225-7025 - Restriction on acquisition of forgings.

    Science.gov (United States)

    2010-10-01

    ... of forgings. 252.225-7025 Section 252.225-7025 Federal Acquisition Regulations System DEFENSE... CLAUSES Text of Provisions And Clauses 252.225-7025 Restriction on acquisition of forgings. As prescribed in 225.7102-4, use the following clause: Restriction on Acquisition of Forgings (DEC 2009) (a...

  6. Prevalence of oral lesions in pan vendor

    Directory of Open Access Journals (Sweden)

    Prakash Gadodia

    2011-01-01

    Full Text Available Background: Being a portal of entry to various smoking and smokeless tobacco products, oral cavity is prone to deleterious effects. Present study consist of epidemiological survey to elucidate oral lesions in pan vendors. Aims and objectives: To detect oral lesions in pan vendors and compare it with controls. To detect habit pattern and prevalence of OSMF and other lesions in pan vendors as compared to controls- To identify, recognize and evaluate the possible etiology for OSMF, encompassing various chewing and smoking habits. Materials and methods: Study population consist of 170 pan vendors with age ranging from 15 to 55 years and equal number of sex matched controls selected randomly. Results: Prevalence of oral lesions in pan vendors is statistically significantly higher as compared to controls. The habit of arecanut chewing in various forms was present in all cases. The habit of smoking and smokeless tobacco products was present in all cases. Conclusion: Pan vendors are at higher risk for oral lesions than controls. There is increase in relative risk with increase in duration and frequency of habit.

  7. Innovative Approach for IBS Vendor Selection Problem

    Directory of Open Access Journals (Sweden)

    Omar Mohd Faizal

    2016-01-01

    Full Text Available Supply chain management in Industrialised Building System (IBS construction management has significantly determined the successful of company and project performance. Due to the wide variety of criteria and vendor available, the vendor selection process for a specific project needs is becoming more difficult. The need of decision aid for vendor selection in other areas is widely discussed in previous research. However, study on vendor selection for IBS project is largely neglected. Decision Support System (DSS is proposed for this purpose. Yet, most of the DSS models are impractical since they are complicated and difficult for a layman such as project managers to use. Research indicates that the rapid development of ICT has highly potential towards simple and effective DSS. Thus, this paper highlights the importance and research approach for vendor selection in IBS project management. The study is based on Design Science Research Methodology with combination of case studies. It is anticipates that this study will yield an effective value-for-money decision making platform to manage vendor selection process.

  8. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1994-04-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organizations during the period form January 1994 through March 1994. A list of selected bulletins and information notices involving vendor issues and copies of pertinent correspondence involving vendor issues are also included in this periodical

  9. Analysis of reforming process of large distorted ring in final enlarging forging

    International Nuclear Information System (INIS)

    Miyazawa, Takeshi; Murai, Etsuo

    2002-01-01

    In the construction of reactors or pressure vessels for oil chemical plants and nuclear power stations, mono block open-die forging rings are often utilized. Generally, a large forged ring is manufactured by means of enlarging forging with reductions of the wall thickness. During the enlarging process the circular ring is often distorted and becomes an ellipse in shape. However the shape control of the ring is a complicated work. This phenomenon makes the matter still worse in forging of larger rings. In order to make precision forging of large rings, we have developed the forging method using a v-shape anvil. The v-shape anvil is geometrically adjusted to fit the distorted ring in the final circle and reform automatically the shape of the ring during enlarging forging. This paper has analyzed the reforming process of distorted ring by computer program based on F.E.M. and examined the effect on the precision of ring forging. (author)

  10. What Vendors Wished You Knew

    Science.gov (United States)

    Weinstein, Margery

    2010-01-01

    The vendor-learning professional relationship is a delicate one. In the rush to scour the marketplace for the best products and services for learners, and secure a deal favorable to one's company, the learning vendor can be one of the greatest allies. Among the first steps to making a satisfying learning technology purchase is ensuring one's…

  11. Vendor audits: A cooperative program

    International Nuclear Information System (INIS)

    White, S.C.

    1989-01-01

    The litany of recent problems with substandard, fraudulent, or counterfeit materials has led to much scrutiny regarding the adequacy and effectiveness of licensee-performed vendor audits. To address these problems in the audit process, most licensees have dedicated significant additional technical and qualitative resources. In response to the limited availability of sufficient resources and expertise to perform more comprehensive and effective vendor audits, many licensees have recognize the advantages of cooperative programs to perform joint audits with other licensees on a regional basis. The Nuclear Procurement Issues Council (NUPIC) provides such a program on a national level, which has proven to be of significant benefit not only to licensees but also to vendors of nuclear safety-related items and services

  12. Utility-vendor partnerships for refurbishment projects

    Energy Technology Data Exchange (ETDEWEB)

    Newman, G.; Hall, H. [Bruce Power, Tiverton, Ontario (Canada)

    2012-07-01

    Through the course of normal operation of the six (6) Bruce Power units, the quality of plant modifications has from time to time resulted in extensive rework, additional cost and significant unit generation schedule delays. This has impacted Bruce Power’s ability to successfully deliver our capital improvement program, generation plan and therefore our business plan. More recently, the restart of Units 1 and 2 have exhibited this same issue however in a more intensive manner due to the large number of Structures, Systems and Components (SSC) being brought into service. As such Bruce Power has and will continue to take steps to bolster its Quality Assurance and Control provisions as necessary to ensure that upgrades to our stations work first time and every time. Part of this enhanced focus involves the upfront Engineering Change Control (ECC) process and from this perspective it is imperative that these modifications meet and/or exceed the provisions within the Bruce Power ECC requirements, including the quality gates associated with the key milestones within this protocol. As such Bruce Power has and will continue to hold training sessions with our key Vendors to ensure that these requirements are clear since this shall determine the nature of our future working relationship. For Vendors who adhere to these requirements, support will continue to be requested and for cases where they do not, services will be suspended. By extension, services provided in support of field work will similarly be monitored and screened with the same objective, high quality installations must become the standard rather than the exception and special steps have identified and are being implemented to improve the performance in this area of our business. In aggregate the above theme is consistent with a continuous improvement perspective and in recognition that not all services provided by our current Vendor base are of equivalent quality. Bruce Power understands that we must work

  13. Utility-vendor partnerships for refurbishment projects

    International Nuclear Information System (INIS)

    Newman, G.; Hall, H.

    2012-01-01

    Through the course of normal operation of the six (6) Bruce Power units, the quality of plant modifications has from time to time resulted in extensive rework, additional cost and significant unit generation schedule delays. This has impacted Bruce Power’s ability to successfully deliver our capital improvement program, generation plan and therefore our business plan. More recently, the restart of Units 1 and 2 have exhibited this same issue however in a more intensive manner due to the large number of Structures, Systems and Components (SSC) being brought into service. As such Bruce Power has and will continue to take steps to bolster its Quality Assurance and Control provisions as necessary to ensure that upgrades to our stations work first time and every time. Part of this enhanced focus involves the upfront Engineering Change Control (ECC) process and from this perspective it is imperative that these modifications meet and/or exceed the provisions within the Bruce Power ECC requirements, including the quality gates associated with the key milestones within this protocol. As such Bruce Power has and will continue to hold training sessions with our key Vendors to ensure that these requirements are clear since this shall determine the nature of our future working relationship. For Vendors who adhere to these requirements, support will continue to be requested and for cases where they do not, services will be suspended. By extension, services provided in support of field work will similarly be monitored and screened with the same objective, high quality installations must become the standard rather than the exception and special steps have identified and are being implemented to improve the performance in this area of our business. In aggregate the above theme is consistent with a continuous improvement perspective and in recognition that not all services provided by our current Vendor base are of equivalent quality. Bruce Power understands that we must work

  14. Medium carbon vanadium steels for closed die forging

    International Nuclear Information System (INIS)

    Jeszensky, Gabor; Plaut, Ronald Lesley

    1993-01-01

    This work analyses the medium carbon micro alloyed vanadium potential for closed die forged production. The steels reach the mechanical resistance requests during cooling after forging, eliminating the subsequent thermal treatment. Those steels also present good fatigue resistance and machinability. The industrial scale experiments are also reported

  15. Gear hot forging process robust design based on finite element method

    International Nuclear Information System (INIS)

    Xuewen, Chen; Won, Jung Dong

    2008-01-01

    During the hot forging process, the shaping property and forging quality will fluctuate because of die wear, manufacturing tolerance, dimensional variation caused by temperature and the different friction conditions, etc. In order to control this variation in performance and to optimize the process parameters, a robust design method is proposed in this paper, based on the finite element method for the hot forging process. During the robust design process, the Taguchi method is the basic robust theory. The finite element analysis is incorporated in order to simulate the hot forging process. In addition, in order to calculate the objective function value, an orthogonal design method is selected to arrange experiments and collect sample points. The ANOVA method is employed to analyze the relationships of the design parameters and design objectives and to find the best parameters. Finally, a case study for the gear hot forging process is conducted. With the objective to reduce the forging force and its variation, the robust design mathematical model is established. The optimal design parameters obtained from this study indicate that the forging force has been reduced and its variation has been controlled

  16. Optimum design of forging process parameters and preform shape under uncertainties

    International Nuclear Information System (INIS)

    Repalle, Jalaja; Grandhi, Ramana V.

    2004-01-01

    Forging is a highly complex non-linear process that is vulnerable to various uncertainties, such as variations in billet geometry, die temperature, material properties, workpiece and forging equipment positional errors and process parameters. A combination of these uncertainties could induce heavy manufacturing losses through premature die failure, final part geometric distortion and production risk. Identifying the sources of uncertainties, quantifying and controlling them will reduce risk in the manufacturing environment, which will minimize the overall cost of production. In this paper, various uncertainties that affect forging tool life and preform design are identified, and their cumulative effect on the forging process is evaluated. Since the forging process simulation is computationally intensive, the response surface approach is used to reduce time by establishing a relationship between the system performance and the critical process design parameters. Variability in system performance due to randomness in the parameters is computed by applying Monte Carlo Simulations (MCS) on generated Response Surface Models (RSM). Finally, a Robust Methodology is developed to optimize forging process parameters and preform shape. The developed method is demonstrated by applying it to an axisymmetric H-cross section disk forging to improve the product quality and robustness

  17. First Results of Energy Saving at Process Redesign of Die Forging Al-Alloys

    International Nuclear Information System (INIS)

    Pepelnjak, Tomaz; Kuzman, Karl; Kokol, Anton

    2011-01-01

    The contribution deals with eco-friendly solutions for shortened production chains of forging light alloys. During the die forging operations a remarkable amount of material goes into the flash and later on into chips during finish machining. These low value side products are rich with embedded energy therefore recycling or reprocessing could be very energy saving procedure.In cooperation with a die forging company a shortened reprocessing cycle has been studied starting from re-melting the forging flash and without additional heating to cast preforms for subsequent die forging. As such preforms have not as good formability characteristics as those done from extruded billets the isothermal forging process has been adopted. First results showed that without cracks and other defects the formability is sufficient for a broad spectrum of forgings.To improve the formability a homogenization process of cast preforms has been implemented. As the process started immediately after casting, amount of additional energy for heating was minimized. To reduce voids forging process was redesigned in a way to assure greater hydrostatic pressures in parts during forging. First results were promising therefore research is going towards improving processes without adding significantly more energy as it is needed for casting with homogenization and die forging.

  18. Ultra-large size austenitic stainless steel forgings for fast breeder reactor 'Monju'

    International Nuclear Information System (INIS)

    Tsukada, Hisashi; Suzuki, Komei; Sato, Ikuo; Miura, Ritsu.

    1988-01-01

    The large SUS 304 austenitic stainless steel forgings for the reactor vessel of the prototype FBR 'Monju' of 280 MWe output were successfully manufactured. The reactor vessel contains the heart of the reactor and sodium coolant at 530 deg C, and its inside diameter is about 7 m, and height is about 18 m. It is composed of 12 large forgings, that is, very thick flanges and shalls made by ring forging and an end plate made by disk forging and hot forming, using a special press machine. The manufacture of these large forgings utilized the results of the basic test on the material properties in high temperature environment and the effect that the manufacturing factors exert on the material properties and the results of the development of manufacturing techniques for superlarge forgings. The problems were the manufacturing techniques for the large ingots of 250 t class of high purity, the hot working techniques for stainless steel of fine grain size, the forging techniques for superlarge rings and disks, and the machining techniques of high precision for particularly large diameter, thin wall rings. The manufacture of these large stainless steel forgings is reported. (Kako, I.)

  19. 77 FR 14445 - Application for a License To Export Steel Forging

    Science.gov (United States)

    2012-03-09

    ... NUCLEAR REGULATORY COMMISSION Application for a License To Export Steel Forging Pursuant to 10 CFR 110.70(b) ``Public Notice of Receipt of an Application,'' please take notice that the Nuclear... head steel February 7, 2012 forging. forging will be XR175 machined into the 11005983 finished vessel...

  20. Mannes of Forging and Perspectives of Knuckle Joint Presses Modernization

    Directory of Open Access Journals (Sweden)

    A. A. Antsifirov

    2014-01-01

    Full Text Available The article raises an issue to enhance technological forging capabilities on the known knuckle joint presses. It provides an illustrated overview of main design types of presses with crank-knuckle, toggle-knuckle, and knuckle joint mechanisms. The article also shows the advantages of the modernization way and improvement just of the active press equipment in terms of quality-to-price ratio, for example, as compared to the similar new foreign press equipment.It gives an overview of features, which provide forging processes owing to kinetic energy accumulated with the moving parts of the known designs of the knuckle joint presses depending on the drive actuating mechanism. Focused attention is drawn to forging on the knuckle joint presses for a time of contact with a work piece to be comparable with the duration of the work piece deformation process on hydraulic forging hammers. This allows us to forge thin-wall products with process automation compared to the forging hammers.Analysis of accumulating processes of kinetic energy by the moving parts of the knuckle joint presses has shown that presses driven by hydraulic cylinders or two screw hydraulic cylinder are the most optimal for technological operations as evidenced by references to domestic and foreign invention certificates and patents. The article presents disadvantages of forging on presses with hydraulic or pneumatic drive. It is a dependence of the deformation force, caused, mainly, by a force of the drive cylinder. The article gives linear movement rate quantities of press moving members depending on the drives of the actuating mechanism. Based on the above analysis of the features to manufacture work pieces on the knuckle joint presses, the article gives the rationale for the relevance of forging in a short period of time, provided that the moving parts of the press accumulate the required kinetic energy. This can be achieved only through modernization and improvement of forging

  1. Optical Forging of Graphene into Three-Dimensional Shapes.

    Science.gov (United States)

    Johansson, Andreas; Myllyperkiö, Pasi; Koskinen, Pekka; Aumanen, Jukka; Koivistoinen, Juha; Tsai, Hung-Chieh; Chen, Chia-Hao; Chang, Lo-Yueh; Hiltunen, Vesa-Matti; Manninen, Jyrki J; Woon, Wei Yen; Pettersson, Mika

    2017-10-11

    Atomically thin materials, such as graphene, are the ultimate building blocks for nanoscale devices. But although their synthesis and handling today are routine, all efforts thus far have been restricted to flat natural geometries, since the means to control their three-dimensional (3D) morphology has remained elusive. Here we show that, just as a blacksmith uses a hammer to forge a metal sheet into 3D shapes, a pulsed laser beam can forge a graphene sheet into controlled 3D shapes in the nanoscale. The forging mechanism is based on laser-induced local expansion of graphene, as confirmed by computer simulations using thin sheet elasticity theory.

  2. Development of high purity large forgings for nuclear power plants

    International Nuclear Information System (INIS)

    Tanaka, Yasuhiko; Sato, Ikuo

    2011-01-01

    The recent increase in the size of energy plants has been supported by the development of manufacturing technology for high purity large forgings for the key components of the plant. To assure the reliability and performance of the large forgings, refining technology to make high purity steels, casting technology for gigantic ingots, forging technology to homogenize the material and consolidate porosity are essential, together with the required heat treatment and machining technologies. To meet these needs, the double degassing method to reduce impurities, multi-pouring methods to cast the gigantic ingots, vacuum carbon deoxidization, the warm forging process and related technologies have been developed and further improved. Furthermore, melting facilities including vacuum induction melting and electro slag re-melting furnaces have been installed. By using these technologies and equipment, large forgings have been manufactured and shipped to customers. These technologies have also been applied to the manufacture of austenitic steel vessel components of the fast breeder reactors and components for fusion experiments.

  3. Development of high purity large forgings for nuclear power plants

    Science.gov (United States)

    Tanaka, Yasuhiko; Sato, Ikuo

    2011-10-01

    The recent increase in the size of energy plants has been supported by the development of manufacturing technology for high purity large forgings for the key components of the plant. To assure the reliability and performance of the large forgings, refining technology to make high purity steels, casting technology for gigantic ingots, forging technology to homogenize the material and consolidate porosity are essential, together with the required heat treatment and machining technologies. To meet these needs, the double degassing method to reduce impurities, multi-pouring methods to cast the gigantic ingots, vacuum carbon deoxidization, the warm forging process and related technologies have been developed and further improved. Furthermore, melting facilities including vacuum induction melting and electro slag re-melting furnaces have been installed. By using these technologies and equipment, large forgings have been manufactured and shipped to customers. These technologies have also been applied to the manufacture of austenitic steel vessel components of the fast breeder reactors and components for fusion experiments.

  4. Development of Oxide Dispersion Strengthened (ODS) Ferritic Steel Through Powder Forging

    Science.gov (United States)

    Kumar, Deepak; Prakash, Ujjwal; Dabhade, Vikram V.; Laha, K.; Sakthivel, T.

    2017-04-01

    Oxide dispersion strengthened (ODS) ferritic steels are candidates for cladding tubes in fast breeder nuclear reactors. In this study, an 18%Cr ODS ferritic steel was prepared through powder forging route. Elemental powders with a nominal composition of Fe-18Cr-2 W-0.2Ti (composition in wt.%) with 0 and 0.35% yttria were prepared by mechanical alloying in a Simoloyer attritor under argon atmosphere. The alloyed powders were heated in a mild steel can to 1473 K under flowing hydrogen atmosphere. The can was then hot forged. Steps of sealing, degassing and evacuation are eliminated by using powder forging. Heating ODS powder in hydrogen atmosphere ensures good bonding between alloy powders. A dense ODS alloy with an attractive combination of strength and ductility was obtained after re-forging. On testing at 973 K, a loss in ductility was observed in yttria-containing alloy. The strength and ductility increased with increase in strain rate at 973 K. Reasons for this are discussed. The ODS alloy exhibited a recrystallized microstructure which is difficult to achieve by extrusion. No prior particle boundaries were observed after forging. The forged compacts exhibited isotropic mechanical properties. It is suggested that powder forging may offer several advantages over the traditional extrusion/HIP routes for fabrication of ODS alloys.

  5. CVFA: Coal vendor financial advisor

    International Nuclear Information System (INIS)

    Goote, W.G.; Andersen, S.

    1992-01-01

    An expert system for determining coal vendor financial viability in fuel purchasing contracts at an electric utility is described. The system blends rules, data objects, and financial knowledge to provide a rational basis for accepting or rejecting coal contracts given the financial capability of the coal vendor. The discussion concludes with a critique of managerial issues in the development of the system and its use in decision making. 3 refs., 1 fig

  6. Medium carbon vanadium micro alloyed steels for drop forging

    International Nuclear Information System (INIS)

    Jeszensky, Gabor; Plaut, Ronald Lesley

    1992-01-01

    Growing competitiveness of alternative manufacturing routes requires cost minimization in the production of drop forged components. The authors analyse the potential of medium carbon, vanadium microalloyed steels for drop forging. Laboratory and industrial experiments have been carried out emphasizing deformation and temperature cycles, strain rates and dwell times showing a typical processing path, associated mechanical properties and corresponding microstructures. The steels the required levels of mechanical properties on cooling after forging, eliminating subsequent heat treatment. The machinability of V-microalloyed steels is also improved when compared with plain medium carbon steels. (author)

  7. Study on Manufacturing Process of Hollow Main Shaft by Open Die Forging

    International Nuclear Information System (INIS)

    Kwon, Yong Chul; Kang, Jong Hun; Kim, Sang Sik

    2016-01-01

    The main shaft is one of the key components connecting the rotor hub and gear box of a wind power generator. Typically, main shafts are manufactured by open die forging method. However, the main shaft for large MW class wind generators is designed to be hollow in order to reduce the weight. Additionally, the main shafts are manufactured by a casting process. This study aims to develop a manufacturing process for hollow main shafts by the open die forging method. The design of a forging process for a solid main shaft and hollow shaft was prepared by an open die forging process design scheme. Finite element analyses were performed to obtain the flow stress by a hot compression test at different temperature and strain rates. The control parameters of each forging process, such as temperature and effective strain, were obtained and compared to predict the suitability of the hollow main shaft forging process. Finally, high productivity reflecting material utilization ratio, internal quality, shape, and dimension was verified by the prototypes manufactured by the proposed forging process for hollow main shafts

  8. Study on Manufacturing Process of Hollow Main Shaft by Open Die Forging

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Yong Chul [Gyeongnam Technopark, Changwon (Korea, Republic of); Kang, Jong Hun [Jungwon Univ., Goisan (Korea, Republic of); Kim, Sang Sik [Gyeongsang Natiional Univ., Jinju (Korea, Republic of)

    2016-02-15

    The main shaft is one of the key components connecting the rotor hub and gear box of a wind power generator. Typically, main shafts are manufactured by open die forging method. However, the main shaft for large MW class wind generators is designed to be hollow in order to reduce the weight. Additionally, the main shafts are manufactured by a casting process. This study aims to develop a manufacturing process for hollow main shafts by the open die forging method. The design of a forging process for a solid main shaft and hollow shaft was prepared by an open die forging process design scheme. Finite element analyses were performed to obtain the flow stress by a hot compression test at different temperature and strain rates. The control parameters of each forging process, such as temperature and effective strain, were obtained and compared to predict the suitability of the hollow main shaft forging process. Finally, high productivity reflecting material utilization ratio, internal quality, shape, and dimension was verified by the prototypes manufactured by the proposed forging process for hollow main shafts.

  9. Involving vendors in continuous quality improvement efforts.

    Science.gov (United States)

    McDevitt, M C

    1995-03-01

    In the hospital environment, vendors supply a wide range of items, from surgical sutures to the latest in high-cost technological equipment. Also, many clinical and support services, such as respiratory therapy, transcription, and computer databanks are now outsourced to commercial vendors. Interaction with such vendors is often less than satisfactory, with prolonged timelines and disruption of an important process that is being computerized. Although hospitals deal with very few vendors in long-term relationships, such as those seen in manufacturing, this should not preclude the formation of a supplier-customer relationship that goes beyond management's interaction with the sales representative in response to a request for proposal. This is especially true when a process improvement team has studied an internal process and defined a key quality characteristic.

  10. DEVELOPING VENDOR IMPROVEMENT PROGRAM IN MALAYSIA AUTOMOTIVE COMPANY

    Directory of Open Access Journals (Sweden)

    SHUKRIAH ABDULLAH

    2016-04-01

    Full Text Available Improvement Program seek to do evaluation well, request to become sufficiently versed in evaluation or to integrate on improvement perspective in all phase of performance, from needs assessment to implementation and evaluation itself. The purpose of this program in the automotive company is to assist vendor as global manufacturer in preparation towards ASEAN Free Trade Agreement (AFTA 2015. This development vendor improvement program emphasize on the downtime reduction to below 200 minutes per month with the ultimate end of improving not only program or solutions but also the organizations and customer. A practical approach either planned or unplanned by the automotive company require policies and procedures that address the same consideration on the downtime identification. 20 top bottom rank vendor were determined based on the downtime performance, followed by classification into different group based on severity. To execute the vendor improvement program three among 20 top bottom rank vendors were selected due to willingness to participate and ease of data access in the program. Selected vendors have high ranking in terms of downtime. The case study method involved an interview and plant observation. The used of secondary data from the automotive company, and previous researcher are also utilised. This improvement program assists the automobile manufacturer to improve its supplier’s performance. The vendor improvement program is implemented through a whole supplier operation assessment.

  11. Licensee contractor and vendor and vendor inspection status report. Quarterly report, July 1995--September 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    This periodical covers the results of inspections performed by the NRC`s Special Inspection Branch, Vendor Inspection Section, that have been distributed to the inspected organizations during the period from July 1995 through September 1995. Vendors inspected include: (1) Continental Disc Corporation, (2) Divesco, (3) Eaton, (4) General Electric Nuclear Energy, (5) ITT Barton, (6) Liberty Technologies, (7) Mid-South Nuclear, (8) Power Distribution Services, (9) Rosemount, (10) Target-Rock, and (11) Westinghouse Electric.

  12. Licensee contractor and vendor and vendor inspection status report. Quarterly report, July 1995--September 1995

    International Nuclear Information System (INIS)

    1995-12-01

    This periodical covers the results of inspections performed by the NRC's Special Inspection Branch, Vendor Inspection Section, that have been distributed to the inspected organizations during the period from July 1995 through September 1995. Vendors inspected include: (1) Continental Disc Corporation, (2) Divesco, (3) Eaton, (4) General Electric Nuclear Energy, (5) ITT Barton, (6) Liberty Technologies, (7) Mid-South Nuclear, (8) Power Distribution Services, (9) Rosemount, (10) Target-Rock, and (11) Westinghouse Electric

  13. An Analysis of DOD Fraudulent Vendor Payments

    National Research Council Canada - National Science Library

    Jones-Oxendine, Shawn

    1999-01-01

    ...) known DoD fraudulent vendor cases in light of their management control weaknesses. A high risk of fraudulent vendor payments were present in the DoD, pre-DFAS finance and accounting systems and the current DFAS configuration...

  14. Optimising mechanical properties of hot forged nickel superalloy 625 components

    Science.gov (United States)

    Singo, Nthambe; Coles, John; Rosochowska, Malgorzata; Lalvani, Himanshu; Hernandez, Jose; Ion, William

    2018-05-01

    Hot forging and subsequent heat treatment were resulting in substandard mechanical properties of nickel superalloy, Alloy 625, components. The low strength was found to be due to inadequate deformation during forging, excessive grain growth and precipitation of carbides during subsequent heat treatment. Experimentation in a drop forging company and heat treatment facility led to the establishment of optimal parameters to minimise grain size and mitigate the adverse effects of carbide precipitation, leading to successful fulfilment of mechanical property specifications. This was achieved by reducing the number of operations, maximising the extent of deformation by changing the slug dimensions and its orientation in the die, and minimising the time of exposure to elevated temperatures in both the forging and subsequent heat treatment processes to avoid grain growth.

  15. Using of material-technological modelling for designing production of closed die forgings

    Science.gov (United States)

    Ibrahim, K.; Vorel, I.; Jeníček, Š.; Káňa, J.; Aišman, D.; Kotěšovec, V.

    2017-02-01

    Production of forgings is a complex and demanding process which consists of a number of forging operations and, in many cases, includes post-forge heat treatment. An optimized manufacturing line is a prerequisite for obtaining prime-quality products which in turn are essential to profitable operation of a forging company. Problems may, however, arise from modifications to the manufacturing route due to changing customer needs. As a result, the production may have to be suspended temporarily to enable changeover and optimization. Using material-technological modelling, the required modifications can be tested and optimized under laboratory conditions outside the plant without disrupting the production. Thanks to material-technological modelling, the process parameters can be varied rapidly in response to changes in market requirements. Outcomes of the modelling runs include optimum parameters for the forging part’s manufacturing route, values of mechanical properties, and results of microstructure analysis. This article describes the use of material-technological modelling for exploring the impact of the amount of deformation and the rate of cooling of a particular forged part from the finish-forging temperature on its microstructure and related mechanical properties.

  16. Study on isothermal precision forging process of rare earth intensifying magnesium alloy

    International Nuclear Information System (INIS)

    Shan, Debin; Xu, Wenchen; Han, Xiuzhu; Huang, Xiaolei

    2012-01-01

    A three dimensional rigid-plastic finite element model is established to simulate the isothermal precision forging process of the magnesium alloy bracket based on DEFORM 3D in order to analyze the material flow rule and determine the forging process scheme. Some problems such as underfilling and too large forging pressure are predicted and resolved through optimizing the shapes of the billet successfully. Compared to the initial microstructure, the isothermal-forged microstructure of the alloy refines obviously and amounts of secondary phases precipitate on the matrix during isothermal forging process. In subsequent ageing process, large quantities of secondary phases precipitate from α-Mg matrix with increasing ageing time. The optimal comprehensive mechanical properties of the alloy have been obtained after aged at 473 K, 63 h with the ultimate tensile strength, tensile yield strength and elongation 380 MPa, 243 MPa and 4.07% respectively, which shows good potential for application of isothermal forging process of rare earth intensifying magnesium alloy.

  17. Near net shape forging of titanium alloy turbine blade

    International Nuclear Information System (INIS)

    Morita, Akiyasu; Hattori, Shigeo; Tani, Kazuhito; Takemura, Atsushi; Ashida, Yoshio

    1991-01-01

    The isothermal forging process has been developed to produce turbine blades made of near β Ti-alloy Ti-10V-2Fe-3Al. It is important to set the preform at the optimum position of the die in order to get a high precision product. The deformation analysis by using FEM is effective to determine the optimum position. And also it is necessary to avoid buckling induced by the restriction of axial elongation of the material. As a result, Ti-10V-2Fe-3Al blades could be formed precisely by using only one stage of forging, and machining was needed only at the root. The thickness of the oxide layer induced on the surface of the forged blade was only 70μm. The mechanical properties of Ti-10V-2Fe-3Al blades after forging and annealing were superior to those of Ti-6Al-4V blades and were nearly uniform across the length of the blades. (author)

  18. Sensitivity analysis and optimization algorithms for 3D forging process design

    International Nuclear Information System (INIS)

    Do, T.T.; Fourment, L.; Laroussi, M.

    2004-01-01

    This paper presents several approaches for preform shape optimization in 3D forging. The process simulation is carried out using the FORGE3 registered finite element software, and the optimization problem regards the shape of initial axisymmetrical preforms. Several objective functions are considered, like the forging energy, the forging force or a surface defect criterion. Both deterministic and stochastic optimization algorithms are tested for 3D applications. The deterministic approach uses the sensitivity analysis that provides the gradient of the objective function. It is obtained by the adjoint-state method and semi-analytical differentiation. The study of stochastic approaches aims at comparing genetic algorithms and evolution strategies. Numerical results show the feasibility of such approaches, i.e. the achieving of satisfactory solutions within a limited number of 3D simulations, less than fifty. For a more industrial problem, the forging of a gear, encouraging optimization results are obtained

  19. Implant vendors and hospitals: competing influences over product choice by orthopedic surgeons.

    Science.gov (United States)

    Burns, Lawton R; Housman, Michael G; Booth, Robert E; Koenig, Aaron

    2009-01-01

    Vendors of hip and knee implants court orthopedic surgeons to adopt their products. Hospitals, which have to pay for these products, now court the same surgeons to help reduce the number of vendors and contain implant costs. This study measures the surgeon's perceived alignment of interests with both vendors and hospitals and gauges surgeons' exposure and receptivity to hospital cost-containment efforts. We surveyed all practicing orthopedists performing 12 or more implant procedures annually in Pennsylvania. The survey identified the surgeon's preferred vendor, tenure with that vendor, use of the vendor during residency training, receipt of financial payments from the vendor, alignment of interests with both vendor and hospital stakeholders, and exposure and receptivity to hospital cost-containment efforts. Surgeons have long-standing relationships with implant vendors, but only a small proportion receive financial payments. Surgeons align most closely with the vendor's sales representative and least closely with the hospital's purchasing manager. Paradoxically, surgeons support hospital efforts to limit the number of vendors but report that their own choice of vendor is not constrained. The major drivers of surgeons' alignment and stance toward cost containment are their tenure with and receipt of financial payments from the vendor. Hospitals face a competitive disadvantage in capturing the attention of orthopedists, compared with implant vendors. The vendors' advantage stems from historical, financial, and service benefits offered to surgeons. Hospital executives now seek to offer comparable benefits to surgeons.

  20. High yttria ferritic ODS steels through powder forging

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Deepak [Department of Metallurgical and Materials Engineering, I.I.T-Roorkee, Uttarakhand 247667 (India); Prakash, Ujjwal, E-mail: ujwalfmt@iitr.ac.in [Department of Metallurgical and Materials Engineering, I.I.T-Roorkee, Uttarakhand 247667 (India); Dabhade, Vikram V. [Department of Metallurgical and Materials Engineering, I.I.T-Roorkee, Uttarakhand 247667 (India); Laha, K.; Sakthivel, T. [Mechanical Metallurgy Group, IGCAR, Kalpakkam, Tamilnadu 603102 (India)

    2017-05-15

    Oxide dispersion strengthened (ODS) steels are being developed for future nuclear reactors. ODS Fe-18%Cr-2%W-0.2%Ti steels with 0, 0.35, 0.5, 1 and 1.5% Y{sub 2}O{sub 3} (all compositions in weight%) dispersion were fabricated by mechanical alloying of elemental powders. The powders were placed in a mild steel can and forged in a stream of hydrogen gas at 1473 K. The steels were forged again to final density. The strength of ODS steel increased with yttria content. Though this was accompanied by a decrease in tensile elongation, all the steels showed significant ductility. The ductility in high yttria alloys may be attributed to improved inter-particle bonding between milled powders due to reduction of surface oxides by hydrogen. This may permit development of ODS steels with yttria contents higher than the conventional limit of 0.5%. It is suggested that powder forging is a promising route to fabricate ODS steels with high yttria contents and improved ductility. - Highlights: •ODS steels with yttria contents beyond the conventional limit of 0.5 wt% were fabricated by powder forging in a hydrogen atmosphere. •All the alloys exhibited significant ductility. •This may be attributed to improved inter-particle bonding due to reduction of surface oxides by hydrogen. •Strength in excess of 300 MPa was obtained at 973 K for 0.5%, 1% and 1.5% yttria ODS alloys. •Powder forging is a promising route to fabricate ODS steels and permits development of compositions with up to 1.5% yttria.

  1. Close toleranoe forging of chromium steel blades for powerful steam turbines

    International Nuclear Information System (INIS)

    Shastin, Eh.G.; Kositskij, Yu.N.; Lyubchits, G.A.

    1989-01-01

    Work on simulating technological process on die-forging hammer was performed in order to reduce the preparation period bringing technology of close tolerance forging of turbine blades to a commercial level. A special attention was paid to development of accurate forming of forgings of 20Kh13Sh, 12Kh13 and 15Kh11MFSh steels on screw presses with nominal effort equal to 80 and 144 MN

  2. A case on vendor selection methodology: An integrated approach

    Directory of Open Access Journals (Sweden)

    Nikhil C. Shil

    2009-11-01

    Full Text Available Vendor selection methodology is a highly researched area in supply chain management l terature and a very significant decision taken by supply chain managers due to technological advances in the manufacturing process. Such research has two basic dimensions: one is related to the identification of variables affecting the performance of the vendors and the other deals with the methodology to be applied. Most of the research conducted in this area deal with the upfront selection of vendors. However, it is very common to have a list of dedicated vendors due to the development of sophisticated production technologies like just in time (JIT, a lean or agile manufacturing process where continuous flow of materials is a requirement. This paper addresses the issue of selecting the optimal vendor from the internal database of a company. Factor analysis, analytical hierarchy process and regression analysis is used in an integrated way to supplement the vendor selection process. The methodology presented here is simply a proposal where every possible room for adjustment is available.

  3. Management information systems and the role of the nurse vendor.

    Science.gov (United States)

    Lenkman, S

    1985-09-01

    Nurse vendors have the ability and motivation to respond to market imperatives faster than most health care institutions. Vendors can contribute important knowledge to nursing literature about the consultant-expert vendor-client relationship and the expectations of both.

  4. Integral forged pump casing for the primary coolant circuit of a nuclear reactor: Development in design, forging technology, and material

    International Nuclear Information System (INIS)

    Austel, W.; Korbe, H.

    1986-01-01

    Developments in the forging of large casings for primary circuit coolant pumps for light water reactors in Germany are demonstrated beginning with the multiple forging fabricated version and ending with the integral forged type. This version is the result of the joint efforts of the pump manufacturer and the forgemaster after a cost-gain evaluation and represents an optimum solution in view of its functional and economical performance and also considering the high requirements for mechanical-technological properties, including homogeneity of the material. The development from 22 NiMoCr 3 7/A 508 Class 2 to 20 MnMoNi 5 5/A 508 Class 3 and their optimization will be demonstrated. This development is based mainly on minimizing the sulfur content and on vacuum carbon deoxidation (VCD), which results in a reduction of the A-segregations, in improving fracture toughness and isotropy, and in the desired fine-grain structure

  5. Patent medicine vendors are major providers antimalaria treatment

    African Journals Online (AJOL)

    management of malaria by this informal sector of healthcare delivery is however ... Methods: Fifty-five patent medicine vendors selected through a multistage sampling ... training of the patent medicine vendors, the overall appropriate treatment ...

  6. Vendor neutral archive in PACS

    International Nuclear Information System (INIS)

    Agarwal, Tapesh Kumar; Sanjeev

    2012-01-01

    An archive is a location containing a collection of records, documents, or other materials of historical importance. An integral part of Picture Archiving and Communication System (PACS) is archiving. When a hospital needs to migrate a PACS vendor, the complete earlier data need to be migrated in the format of the newly procured PACS. It is both time and money consuming. To address this issue, the new concept of vendor neutral archive (VNA) has emerged. A VNA simply decouples the PACS and workstations at the archival layer. This is achieved by developing an application engine that receives, integrates, and transmits the data using the different syntax of a Digital Imaging and Communication in Medicine (DICOM) format. Transferring the data belonging to the old PACS to a new one is performed by a process called migration of data. In VNA, a number of different data migration techniques are available to facilitate transfer from the old PACS to the new one, the choice depending on the speed of migration and the importance of data. The techniques include simple DICOM migration, prefetch-based DICOM migration, medium migration, and the expensive non-DICOM migration. “Vendor neutral” may not be a suitable term, and “architecture neutral,” “PACS neutral,” “content neutral,” or “third-party neutral” are probably better and preferred terms. Notwithstanding this, the VNA acronym has come to stay in both the medical IT user terminology and in vendor nomenclature, and radiologists need to be aware of its impact in PACS across the globe

  7. Site Specific Vendor's License

    Data.gov (United States)

    Montgomery County of Maryland — This dataset contains information of a site-specific vendor's license which is required if an individual sells or offers to sell goods or services from a stationary...

  8. Do vendors benefit from promotions in a multi-vendor loyalty program?

    NARCIS (Netherlands)

    Dorotic, Matilda; Fok, Dennis; Verhoef, Peter C.; Bijmolt, Tammo H. A.

    The growing trend of networking in recent years has led to an increase in number of loyalty program partnerships, most notably multi-vendor loyalty programs (MVLP). In an MVLP (as in other types of LPs), cardholders frequently receive promotional mailings intended to increase sales at the

  9. Do vendors benefit from promotions in a multi-vendor loyalty program?

    NARCIS (Netherlands)

    M. Dorotic (Matilda); D. Fok (Dennis); P.C. Verhoef (Peter); T.H.A. Bijmolt (Tammo)

    2011-01-01

    textabstractThe growing trend of networking in recent years has led to an increase in number of loyalty program partnerships, most notably multi-vendor loyalty programs (MVLP). In an MVLP (as in other types of LPs), cardholders frequently receive promotional mailings intended to increase sales at

  10. Do vendors benefit from promotions in a multi-vendor loyalty program?

    NARCIS (Netherlands)

    Dorotic, Matilda; Fok, Dennis; Verhoef, Peter C.; Bijmolt, Tammo H. A.

    2011-01-01

    The growing trend of networking in recent years has led to an increase in number of loyalty program partnerships, most notably multi-vendor loyalty programs (MVLP). In an MVLP (as in other types of LPs), cardholders frequently receive promotional mailings intended to increase sales at the

  11. OPC model generation procedure for different reticle vendors

    Science.gov (United States)

    Jost, Andrew M.; Belova, Nadya; Callan, Neal P.

    2003-12-01

    The challenge of delivering acceptable semiconductor products to customers in timely fashion becomes more difficult as design complexity increases. The requirements of current generation designs tax OPC engineers greater than ever before since the readiness of high-quality OPC models can delay new process qualifications or lead to respins, which add to the upward-spiraling costs of new reticle sets, extend time-to-market, and disappoint customers. In their efforts to extend the printability of new designs, OPC engineers generally focus on the data-to-wafer path, ignoring data-to-mask effects almost entirely. However, it is unknown whether reticle makers' disparate processes truly yield comparable reticles, even with identical tools. This approach raises the question of whether a single OPC model is applicable to all reticle vendors. LSI Logic has developed a methodology for quantifying vendor-to-vendor reticle manufacturing differences and adapting OPC models for use at several reticle vendors. This approach allows LSI Logic to easily adapt existing OPC models for use with several reticle vendors and obviates the generation of unnecessary models, allowing OPC engineers to focus their efforts on the most critical layers.

  12. Application of CAD/CAE/CAM in forging process: a review

    International Nuclear Information System (INIS)

    Ahmad Baharuddin Abdullah; Hamouda, A.M.S.

    2005-01-01

    Forging can be described as the process in which metal is plastically deformed with application of huge pressure. The process not only changes the shape but also improves the properties of the forged parts due to grain size refinement. Conventionally, the empirical trial and error method has been applied, but recently there are various tools are employed to improved product quality and economic of the process. For example, Computer Aided Design (CAD) is widely used in modeling of the process, while Computer Aided Engineering (CAE) tools have been utilized in analyzing the process. To physically demonstrate the process, Computer Aided Manufacturing (CAM) such as CNC machine has been exploited. In order to improve forging process efficiency, an integrated system that combines all advantages of CAD, CAM and CAE need to be developed. This paper presents an overview of computer aided simulation such as CAD, CAE and CAM application in forging process. (Author)

  13. Examples on cold forged aluminium components in automotive industry

    DEFF Research Database (Denmark)

    Bay, Niels; Kolsgaard, A.

    2000-01-01

    The present paper describes the possibilites of applying cold forging for manufacturing of light weight components in aluminium. A short description of the basic cold forming processes forms the basis for describing the great variety in design of cold forged components. Examples are mainly taken ...... from automotive industry but in a few cases also from other industrial sectors to show the possibilities....

  14. Calculation of recovery plasticity in multistage hot forging under isothermal conditions.

    Science.gov (United States)

    Zhbankov, Iaroslav G; Perig, Alexander V; Aliieva, Leila I

    2016-01-01

    A widely used method for hot forming steels and alloys, especially heavy forging, is the process of multistage forging with pauses between stages. The well-known effect which accompanies multistage hot forging is metal plasticity recovery in comparison with monotonic deformation. A method which takes into consideration the recovery of plasticity in pauses between hot deformations of a billet under isothermal conditions is proposed. This method allows the prediction of billet forming limits as a function of deformation during the forging stage and the duration of the pause between the stages. This method takes into account the duration of pauses between deformations and the magnitude of subdivided deformations. A hot isothermal upsetting process with pauses was calculated by the proposed method. Results of the calculations have been confirmed with experimental data.

  15. Effect of Cold Forging on Microstructure and MechanicalProperties of Al/SiC Composites

    Science.gov (United States)

    Hanamantraygouda, M. B.; Shivakumar, B. P., Dr; Siddappa, P. N.; Sampathkumar, L.; Prashanth, L.

    2018-02-01

    The objective of this work was to investigate the effect of cold forging on mechanical properties and microstructural study of Al MMCs, at different wt% of SiC and forging cycle. The Al-SiC composite material was fabricated by stir casting method at different weight percentage of SiC such as 2.5, 5, 7.5 and 10%. Further, the deformation characteristics during open-die forging of Al-SiC composite at cold conditions was investigated. Cast and forged composite material was subjected to hardness test, tensile test and impact test. The grain size, microstructure behaviour was investigated using optical microscope. The results show that hardness and strength of Al-SiC composite increases and ductility decreases as compared to Al alloy in both as-cast and forged conditions. Optical microscope images showed that the distribution of SiC in Al matrix was more homogeneous in a forged composite as compared to cast one and reduction of porosity was found. Further, it showed that due to forging cycle the grain size was reduced by 30% to 35% from initial size.

  16. Finite element simulations and experimental investigations on ductile fracture in cold forging of aluminum alloy

    Science.gov (United States)

    Amiri, Amir; Nikpour, Amin; Saraeian, Payam

    2018-05-01

    Forging is one of the manufacturing processes of aluminium parts which has two major categories: called hot and cold forging. In the cold forging, the dimensional and geometrical accuracy of final part is high. However, fracture may occur in some aluminium alloys during the process because of less workability. Fracture in cold forging can be in the form of ductile, brittle or combination of both depending on the alloy type. There are several criteria for predicting fracture in cold forging. In this study, cold forging process of 6063 aluminium alloy for three different parts is simulated in order to predict fracture. The results of numerical simulations of Freudenthal criterion is in conformity with experimental tests.

  17. Influence of performance improvement of AP1000 nuclear island main equipment forging on manufacturing

    International Nuclear Information System (INIS)

    Liu Zhiying

    2013-01-01

    In order to comply with the 60-year design life of an AP1000 nuclear power station, higher strength and ductility requirements have been made on AP1000 nuclear island SG forgings than on CPR1000 nuclear island main equipment. In addition, bigger size of AP1000 nuclear island SG forgings increases the difficulty of manufacturing them. Insufficient recognition of these changes may cause unstable quality of forgings and possible quality problems in follow-up welding procedure. On the basis of comparison and analysis of AP1000 nuclear island SG forgings and CPR1000 nuclear island forgings, this thesis suggests clear directions for the actions we need to take. (author)

  18. Simulation and analysis of hot forging process for industrial locking gear elevators

    Science.gov (United States)

    Maarefdoust, M.; Kadkhodayan, M.

    2010-06-01

    In this paper hot forging process for industrial locking gear elevators is simulated and analyzed. An increase in demand of industrial locking gear elevators with better quality and lower price caused the machining process to be replaced by hot forging process. Production of industrial locking gear elevators by means of hot forging process is affected by many parameters such as billet temperature, geometry of die and geometry of pre-formatted billet. In this study the influences of billet temperature on effective plastic strain, radius of die corners on internal stress of billet and thickness of flash on required force of press are investigated by means of computer simulation. Three-dimensional modeling of initial material and die are performed by Solid Edge, while simulation and analysis of forging are performed by Super Forge. Based on the computer simulation the required dies are designed and the workpieces are formed. Comparison of simulation results with experimental data demonstrates great compatibility.

  19. Research into Oil-based Colloidal-Graphite Lubricants for Forging of Al-based Alloys

    International Nuclear Information System (INIS)

    Petrov, A.; Petrov, P.; Petrov, M.

    2011-01-01

    The presented paper describes the topical problem in metal forging production. It deals with the choice of an optimal lubricant for forging of Al-based alloys. Within the scope of the paper, the properties of several oil-based colloidal-graphite lubricants were investigated. The physicochemical and technological properties of these lubricants are presented. It was found that physicochemical properties of lubricant compositions have an influence on friction coefficient value and quality of forgings.The ring compression method was used to estimate the friction coefficient value. Hydraulic press was used for the test. The comparative analysis of the investigated lubricants was carried out. The forging quality was estimated on the basis of production test. The practical recommendations were given to choose an optimal oil-based colloidal-graphite lubricant for isothermal forging of Al-based alloy.

  20. Study on the microstructure of the different parts for new aluminum alloy forgings

    International Nuclear Information System (INIS)

    Gao Wei; Zheng Xiaojing; Wu Fu

    2014-01-01

    The mechanical properties of former aluminium alloy forgings cannot achieve technique demand. Because the component, dimension and preparation technology of new aluminum alloy have changed, the microstructure and mechanical properties of forgings are researched. It is concluded that the flowline of forgings has good continuity and uniformity, it does not have a prominent difference on microhardness of different parts. The results prove that the microstructure of forgings has good consistency. The matrix structure of forgings consists of fiber texture and equiaxed structure. The residual second phases, which are harmful to mechanical properties, are observed in the equiaxed structure. The center of equiaxed structure core zone, the edge of equiaxed structure transition zone and equiaxed structure edge zone should be focus on observing test, they are the sampling location of tensile property. (authors)

  1. 75 FR 70689 - Kaiser Aluminum Fabricated Products, LLC; Kaiser Aluminum-Greenwood Forge Division; Currently...

    Science.gov (United States)

    2010-11-18

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-70,376] Kaiser Aluminum Fabricated Products, LLC; Kaiser Aluminum- Greenwood Forge Division; Currently Known As Contech Forgings, LLC..., applicable to workers of Kaiser Aluminum Fabricated Products, LLC, Kaiser Aluminum-Greenwood Forge Division...

  2. 34 CFR 395.33 - Operation of cafeterias by blind vendors.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false Operation of cafeterias by blind vendors. 395.33... BLIND ON FEDERAL AND OTHER PROPERTY Federal Property Management § 395.33 Operation of cafeterias by blind vendors. (a) Priority in the operation of cafeterias by blind vendors on Federal property shall be...

  3. The sales and marketing practices of English-language internet alcohol vendors.

    Science.gov (United States)

    Williams, Rebecca S; Schmidt, Allison

    2014-03-01

    This study aimed to fill information gaps about the sales and marketing practices of internet alcohol vendors and their implications for addressing youth access and other legal violations. Further, it aimed to expand the limited scientific literature on internet alcohol sales using systematic survey methods to inform future efforts to regulate this industry and prevent sales to minors. The design was a cross-sectional website content analysis survey. [Not applicable]. A total of 105 internet alcohol vendor websites. Six key content analysis topics were explored: products offered, average prices and proportions of vendors using different promotions, policy statements and methods for age verification, payment and delivery. Websites sell and promote a variety of alcohol products, offered as cheaply as $1.93 for a 750-ml bottle. Vendors rely heavily upon age verification methods that are unlikely to prevent sales to minors. Many vendors advertise shipping of products via methods through which it is illegal or against delivery company policies to transport alcohol, and 99% of vendors accept credit cards. Limiting and enforcing delivery and payment options are types of policy interventions that have been used successfully with internet cigarette vendors that may be applicable to internet alcohol vendors as well. Internet alcohol vendor practices are insufficient to prevent sales to minors, and need further regulation and enforcement of existing policies. Their sales practices are similar to those of internet cigarette vendors prior to regulation, and similar regulatory approaches may be effective in reducing internet alcohol sales to minors. © 2013 Society for the Study of Addiction.

  4. Numerical modelling of damage evolution in ingot forging

    DEFF Research Database (Denmark)

    Christiansen, Peter; Martins, Paulo A.F.; Bay, Niels Oluf

    2015-01-01

    The ingot forging process is numerically simulated applying both the Shima-Oyane porous plasticity model as a coupled damage model and the uncoupled normalized Cockcroft & Latham criterion. Four different cases including two different lower die angles (120º and 180º) and two different sizes of feed...... (400mm and 800mm) are analysed. Comparison of the simulation results with recommendations in literature on ingot forging, indicates the normalized Cockcroft & Latham damage criterion to be the most realistic of the two....

  5. Manufacturing and material properties of ultralarge size forgings for advanced BWRPV

    International Nuclear Information System (INIS)

    Suzuki, Komei; Sato, Ikuo; Tsukada, Hisashi

    1994-01-01

    Ultralarge size forgings for the advanced boiling water reactor (ABWR) pressure vessel as represented by the bottom petal made from a 600ton ingot have been developed. The bottom petal is a larger wall thickness ring with 10 integrated nozzles inside and outside the ring. The outer diameter is 7.8m, the height is 1.8m and the wall thickness if 1.1m in the as-forged condition. A very high purity level of P≤qslant0.003% and S≤qslant0.003% can be obtained by the application of double-refining processes to all the molten steel. The forging shows a homogeneous chemical distribution, sound internal qualities and adequate impact properties.This paper summarizes the manufacturing technique and material properties of large size forgings such as the bottom petal, the shell with integrated skirt and the bottom dome. ((orig.))

  6. Investigation of the influence of hybrid layers on the life time of hot forging dies

    Directory of Open Access Journals (Sweden)

    S. Legutko

    2013-04-01

    Full Text Available The paper deals with the issues related in the process of drop forging with special attention paid to the durability of forging tools. It presents the results of industrial investigation of the influence of hybrid layers on hot forging dies. The effectiveness of hybrid layers type nitrided layer/PVD coating applied for extending the life of forging tools whose working surfaces are exposed to such complex exploitation conditions as, among others, cyclically varying high thermal and mechanical loads, as well as intensive abrasion at raised temperature. The examination has been performed on a set of forging tools made of Unimax steel and intended for forging steel rings of gear box synchronizer in the factory FAS in Swarzedz (Poland.

  7. Microstructure evolution and mechanical properties of a particulate reinforced magnesium matrix composites forged at elevated temperatures

    International Nuclear Information System (INIS)

    Deng, K.K.; Wu, K.; Wang, X.J.; Wu, Y.W.; Hu, X.S.; Zheng, M.Y.; Gan, W.M.; Brokmeier, H.G.

    2010-01-01

    SiCp/AZ91 magnesium matrix composite was fabricated by stir casting. The as-cast ingots were cut into cylindrical billets, and then forged at different temperatures (320, 370, 420, 470 and 520 deg. C) at a constant RAM speed of 15 mm/s with 50% reduction. The microstructure evolution of the composites during forging was investigated by optical microscope, scanning electron microscope, and transmission electron microscope. The texture of the forged composites was measured by neutron diffraction. Mechanical properties of the composite at different forging temperatures were tested by tensile tests at room temperature. It was found that a strong basal plane texture formed during forging, and the intensity of basal plane texture weakened as forging temperatures increased. The particle distribution in the composite was significantly improved by hot forging. Typical microstructures were obtained after forging at different temperatures and the composite with different microstructures offered different mechanical properties during tensile test.

  8. Analysis of Filling and Stresses in the Hot Forging Process Depending on Flange Die Shapes

    International Nuclear Information System (INIS)

    Kim, Jun Hyoung; Kim, Cheol

    2010-01-01

    Hot closed-forging process and the die used for forming an automotive flange were analyzed from the viewpoints of heat transfer, grain-flow lines, and stresses to obtain a forged product without defects such as surface cracks, laps, cold shots, and partial filling. The forging process including up-set, pre-forging, final forging and pressing forces was investigated using finite element analysis. The influence of the preform die and the ratio of the heights of the upper die to lower die on the forging process and die were investigated and a die shape (10 .deg. for the preform die, and 1.5:1 ratio for the final die) suitable to achieve successful forging was determined on the basis of a parametric study. All parametric design requirements such as strength, full filling, and a load limit of 13,000 KN were satisfied for this newly developed flange die. New dies and flanges were fabricated and investigated. Defects such as partial filling and surface cracks were not observed

  9. The changing refinery/vendor relationship: One tool for increased competitiveness

    International Nuclear Information System (INIS)

    Borowski, C.J.; Swett, G.H.

    1996-01-01

    The historic relationship between many petroleum refineries and vendors was adversarial. However, during the past 10 years, many industrial firms have found that working together with vendors is critical to reducing costs and improving quality--the two key elements required to maintain a competitive position. As refiners have begun working with their vendors more like partners, numerous benefits have accrued to the refining industry. This paper analyzes how the refiner-vendor relationship has changed. Specifically, the authors address the following issues: the competitive threat that has forced a different approach to contracting services and goods; how right-sizing and capacity creep have contributed to the need to re-examine historic practices; key elements in a successful refinery/vendor relationship; how does it work in real life; and implementing a partnering program

  10. Physical modeling and numerical simulation of V-die forging ingot with central void

    DEFF Research Database (Denmark)

    Christiansen, Peter; Hattel, Jesper Henri; Bay, Niels

    2014-01-01

    Numerical simulation and physical modeling performed on small-scale ingots made from pure lead, having a hole drilled through their centerline to mimic porosity, are utilized to characterize the deformation mechanics of a single open die forging compression stage and to identify the influence...... of the lower V-die angle on porosity closure and forging load requirements of large cast ingots. Results show that a lower V-die angle of 120 provides the best closure of centerline porosity without demanding the highest forging loads or developing unreasonably asymmetric shapes that may create difficulties...... in multi-stage open die forging procedures....

  11. High yttria ferritic ODS steels through powder forging

    Science.gov (United States)

    Kumar, Deepak; Prakash, Ujjwal; Dabhade, Vikram V.; Laha, K.; Sakthivel, T.

    2017-05-01

    Oxide dispersion strengthened (ODS) steels are being developed for future nuclear reactors. ODS Fe-18%Cr-2%W-0.2%Ti steels with 0, 0.35, 0.5, 1 and 1.5% Y2O3 (all compositions in weight%) dispersion were fabricated by mechanical alloying of elemental powders. The powders were placed in a mild steel can and forged in a stream of hydrogen gas at 1473 K. The steels were forged again to final density. The strength of ODS steel increased with yttria content. Though this was accompanied by a decrease in tensile elongation, all the steels showed significant ductility. The ductility in high yttria alloys may be attributed to improved inter-particle bonding between milled powders due to reduction of surface oxides by hydrogen. This may permit development of ODS steels with yttria contents higher than the conventional limit of 0.5%. It is suggested that powder forging is a promising route to fabricate ODS steels with high yttria contents and improved ductility.

  12. 76 FR 66996 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Forging...

    Science.gov (United States)

    2011-10-28

    ... for OMB Review; Comment Request; Forging Machines ACTION: Notice. SUMMARY: The Department of Labor... collection request (ICR) titled, ``Forging Machines,'' to the Office of Management and Budget (OMB) for....218, it is mandatory for covered employers to conduct and to document periodic inspections of forging...

  13. 34 CFR 395.14 - The State Committee of Blind Vendors.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false The State Committee of Blind Vendors. 395.14 Section... BLIND ON FEDERAL AND OTHER PROPERTY The State Licensing Agency § 395.14 The State Committee of Blind... Blind Vendors which, to the extent possible, shall be fully representative of all blind vendors in the...

  14. Design and Analysis of a Forging Die for Manufacturing of Multiple Connecting Rods

    Science.gov (United States)

    Megharaj, C. E.; Nagaraj, P. M.; Jeelan Pasha, K.

    2016-09-01

    This paper demonstrates to utilize the hammer capacity by modifying the die design such that forging hammer can manufacture more than one connecting rod in a given forging cycle time. To modify the die design study is carried out to understand the parameters that are required for forging die design. By considering these parameters, forging die is designed using design modelling tool solid edge. This new design now can produce two connecting rods in same capacity hammer. The new design is required to validate by verifying complete filing of metal in die cavities without any defects in it. To verify this, analysis tool DEFORM 3D is used in this project. Before start of validation process it is require to convert 3D generated models in to. STL file format to import the models into the analysis tool DEFORM 3D. After importing these designs they are analysed for material flow into the cavities and energy required to produce two connecting rods in new forging die design. It is found that the forging die design is proper without any defects and also energy graph shows that the forging energy required to produce two connecting rods is within the limit of that hammer capacity. Implementation of this project increases the production of connecting rods by 200% in less than previous cycle time.

  15. Development and efficiency assessment of process lubrication for hot forging

    Science.gov (United States)

    Kargin, S.; Artyukh, Viktor; Ignatovich, I.; Dikareva, Varvara

    2017-10-01

    The article considers innovative technologies in testing and production of process lubricants for hot bulk forging. There were developed new compositions of eco-friendly water-graphite process lubricants for hot extrusion and forging. New approaches to efficiency assessment of process lubricants are developed and described in the following article. Laboratory and field results are presented.

  16. Vendor-to-vendor education to improve malaria treatment by private drug outlets in Bungoma District, Kenya

    Directory of Open Access Journals (Sweden)

    Makama Sammy

    2003-05-01

    Full Text Available Abstract Background Private outlets are the main suppliers of uncomplicated malaria treatment in Africa. However, they are so numerous that they are difficult for governments to influence and regulate. This study's objective was to evaluate a low-cost outreach education (vendor-to-vendor programme to improve the private sector's compliance with malaria guidelines in Bungoma district, Kenya. The cornerstone of the programme was the district's training of 73 wholesalers who were equipped with customized job aids for distribution to small retailers. Methods Six months after training the wholesalers, the programme was evaluated using mystery shoppers. The shoppers posed as caretakers of sick children needing medication at 252 drug outlets. Afterwards, supervisors assessed the outlets' knowledge, drug stocks, and prices. Results The intervention seems to have had a significant impact on stocking patterns, malaria knowledge and prescribing practices of shops/kiosks, but not consistently on other types of outlets. About 32% of shops receiving job aids prescribed to mystery shoppers the approved first-line drug, sulfadoxine-pyremethamine, as compared to only 3% of the control shops. In the first six months, it is estimated that 500 outlets were reached, at a cost of about $8000. Conclusions Changing private sector knowledge and practices is widely acknowledged to be slow and difficult. The vendor-to-vendor programme seems a feasible district-level strategy for achieving significant improvements in knowledge and practices of shops/kiosks. However, alternate strategies will be needed to influence pharmacies and clinics. Overall, the impact will be only moderate unless national policies and programmes are also introduced.

  17. Comparison of Two Buyer-Vendor Coordination Models

    Science.gov (United States)

    Diar Astanti, Ririn; Ai, The Jin; Gong, Dah-Chuan; Luong, Hunyh Trung

    2018-03-01

    This paper develops and compares two mathematical models for describing situation in coordination of buyer and vendor. In this case the vendor which is an Original Equipment Manufacturers (OEMS) of automotive parts, are supplying different type of buyers, i.e. automotive industry, repair shop and automotive dealers. It is well known that automotive industries are operated in Just in Time (JIT) Production Environment, so that the demand behaviour from this buyer has different characteristics than the demand behaviour from other buyers. Two mathematical models are developed in order to depict two different manufacturing strategies as the vendor response dealing with different type of buyers. These strategies are dividing production lot size for each type of buyer and consolidating all buyer’s demand in to single production lot size.

  18. Structuring vendor-client relationships–a combinatorial approach

    DEFF Research Database (Denmark)

    Volani, Natalia; Herbert-Hansen, Zaza Nadja Lee

    a framework leading to a heuristically determined optimal solution for a company. Design/methodology/approach –Weighting Factor Comparison (WFC) and scale metrics are used in order to holistically determine a firm’s position regarding relationships with potential vendors. Each contributing factor is analyzed...... separately using different sub-frameworks, both qualitative and quantitative. Eventually a score is provided, which will be used as input for the holistic framework for the realization of the analysis. Data from a case study of a large multinational company and its relationship with three of its vendors has...... been used for validation purposes, whereas other factors have been compared to empirical data from literature research. Findings – The framework presented combines various approaches when handling vendor-client relationships and, therefore, minimizes subjectivity. The factors that have been proven...

  19. Deployment of vendor capabilities and competences throughout the outsourcing process

    DEFF Research Database (Denmark)

    Perunovic, Zoran; Christoffersen, Mads; Mefford, Robert N.

    2012-01-01

    Purpose - A vendor's capabilities are recognized as one of the most important factors for success in outsourcing. However, there is a lack of understanding of how vendors manage their capabilities throughout the outsourcing process. With an aim to contribute to filling this existing gap......, the purpose of this paper is to explore how vendors deploy their capabilities in order to win, run and renew the outsourcing contracts. Design/methodology/approach - The research question has been derived by integrating a resource-based view theory with a model of a vendor's process in outsourcing. A multiple......-case study of three contract electronic manufacturers has been employed to explore the research question. Findings - The results show that for achieving their outsourcing objectives, vendors use different capability mixes: the winning, the running, and the renewing. These mixes are created through...

  20. Development of strategies for saving energy by temperature reduction in warm forging processes

    Science.gov (United States)

    Varela, Sonia; Santos, Maite; Vadillo, Leire; Idoyaga, Zuriñe; Valbuena, Óscar

    2016-10-01

    This paper is associated to the European policy of increasing efficiency in raw material and energy usage. This policy becomes even more important in sectors consuming high amount of resources, like hot forging industry, where material costs sums up to 50% of component price and energy ones are continuously raising. The warm forging shows a clear potential of raw material reduction (near-net-shape components) and also of energy saving (forging temperature under 1000°C). However and due to the increment of the energy costs, new solutions are required by the forging sector in order to reduce the temperature below 900°C. The reported research is based on several approaches to reduce the forging temperature applied to a flanged shaft of the automotive sector as demonstration case. The developed investigations have included several aspects: raw material, process parameters, tools and dies behavior during forging process and also metallographic evaluation of the forged parts. This paper summarizes analysis of the ductility and the admissible forces of the flanged shaft material Ck45 in as-supplied state (as-rolled) and also in two additional heat treated states. Hot compression and tensile tests using a GLEEBLE 3800C Thermo mechanical simulator have been performed pursuing this target. In the same way, a coupled numerical model based on Finite Element Method (FEM) has been developed to predict the material flow, the forging loads and the stresses on the tools at lower temperature with the new heat treatments of the raw material. In order to validate the previous development, experimental trials at 850 °C and 750 °C were carried out in a mechanical press and the results were very promising.

  1. Analysis of the thermo-mechanical deformations in a hot forging tool by numerical simulation

    International Nuclear Information System (INIS)

    L-Cancelos, R.; Varas, F.; Viéitez, I.; Martín, E.

    2016-01-01

    Although programs have been developed for the design of tools for hot forging, its design is still largely based on the experience of the tool maker. This obliges to build some test matrices and correct their errors to minimize distortions in the forged piece. This phase prior to mass production consumes time and material resources, which makes the final product more expensive. The forging tools are usually constituted by various parts made of different grades of steel, which in turn have different mechanical properties and therefore suffer different degrees of strain. Furthermore, the tools used in the hot forging are exposed to a thermal field that also induces strain or stress based on the degree of confinement of the piece. Therefore, the mechanical behaviour of the assembly is determined by the contact between the different pieces. The numerical simulation allows to analyse different configurations and anticipate possible defects before tool making, thus, reducing the costs of this preliminary phase. In order to improve the dimensional quality of the manufactured parts, the work presented here focuses on the application of a numerical model to a hot forging manufacturing process in order to predict the areas of the forging die subjected to large deformations. The thermo-mechanical model developed and implemented with free software (Code-Aster) includes the strains of thermal origin, strains during forge impact and contact effects. The numerical results are validated with experimental measurements in a tooling set that produces forged crankshafts for the automotive industry. The numerical results show good agreement with the experimental tests. Thereby, a very useful tool for the design of tooling sets for hot forging is achieved. (paper)

  2. Analysis of the thermo-mechanical deformations in a hot forging tool by numerical simulation

    Science.gov (United States)

    L-Cancelos, R.; Varas, F.; Martín, E.; Viéitez, I.

    2016-03-01

    Although programs have been developed for the design of tools for hot forging, its design is still largely based on the experience of the tool maker. This obliges to build some test matrices and correct their errors to minimize distortions in the forged piece. This phase prior to mass production consumes time and material resources, which makes the final product more expensive. The forging tools are usually constituted by various parts made of different grades of steel, which in turn have different mechanical properties and therefore suffer different degrees of strain. Furthermore, the tools used in the hot forging are exposed to a thermal field that also induces strain or stress based on the degree of confinement of the piece. Therefore, the mechanical behaviour of the assembly is determined by the contact between the different pieces. The numerical simulation allows to analyse different configurations and anticipate possible defects before tool making, thus, reducing the costs of this preliminary phase. In order to improve the dimensional quality of the manufactured parts, the work presented here focuses on the application of a numerical model to a hot forging manufacturing process in order to predict the areas of the forging die subjected to large deformations. The thermo-mechanical model developed and implemented with free software (Code-Aster) includes the strains of thermal origin, strains during forge impact and contact effects. The numerical results are validated with experimental measurements in a tooling set that produces forged crankshafts for the automotive industry. The numerical results show good agreement with the experimental tests. Thereby, a very useful tool for the design of tooling sets for hot forging is achieved.

  3. The structural and phase state formed in construction titanium alloy by radial forging

    Energy Technology Data Exchange (ETDEWEB)

    Shlyakhova, Galina V.; Danilov, Vladimir I.; Orlova, Dina V.; Zuev, Lev B. [Institute of Strength Physics and Materials Science SB RAS, Tomsk (Russian Federation); Zavodchikov, Aleksandr S. [Perm State Technical University, Perm (Russian Federation)

    2011-07-01

    The feasibility of rod manufacture from construction titanium alloy using radial forging on a high duty machine SXK16 was investigated. The investigations were carried on for titanium rod samples using the methods of metallography, electron transmission microscophy and X-ray analysis. The results obtained are described herein. It is found that radial forging results in the formation of homogeneous fine-grained structure.Using radial forging process, high-quality items are produced. As-worked material has submicrocrystalline globular structure and an optimal α:β phase ratio. Besides, the technology is more cost-effective relative to conventional flow charts. Key words: forging, titanium alloy, fine-grain structure, substructure, pore size.

  4. Controlled austempering of hammer forgings aimed at pseudo normalized microstructure directly after deformation

    Directory of Open Access Journals (Sweden)

    P. Skubisz

    2017-01-01

    Full Text Available The study concerns cost-effective realization of controlled thermomechanical processing (CTMP of medium-carbon and HSLA steel aimed at producing microstructure and properties equivalent to normalized condition directly after forging. The results of theoretical and physical modeling of hot forging with subsequent heat treating adopted for industrial realization in continuous manner were verified in semi-industrial conditions of a forge plant.

  5. 29 CFR 99.210 - Subrecipient and vendor determinations.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Subrecipient and vendor determinations. 99.210 Section 99.210 Labor Office of the Secretary of Labor AUDITS OF STATES, LOCAL GOVERNMENTS, AND NON-PROFIT ORGANIZATIONS Audits § 99.210 Subrecipient and vendor determinations. (a) General. An auditee may be a recipient...

  6. Research on Energy-Saving Production Scheduling Based on a Clustering Algorithm for a Forging Enterprise

    Directory of Open Access Journals (Sweden)

    Yifei Tong

    2016-02-01

    Full Text Available Energy efficiency is a buzzword of the 21st century. With the ever growing need for energy efficient and low-carbon production, it is a big challenge for high energy-consumption enterprises to reduce their energy consumption. To this aim, a forging enterprise, DVR (the abbreviation of a forging enterprise, is researched. Firstly, an investigation into the production processes of DVR is given as well as an analysis of forging production. Then, the energy-saving forging scheduling is decomposed into two sub-problems. One is for cutting and machining scheduling, which is similar to traditional machining scheduling. The other one is for forging and heat treatment scheduling. Thirdly, former forging production scheduling is presented and solved based on an improved genetic algorithm. Fourthly, the latter is discussed in detail, followed by proposed dynamic clustering and stacking combination optimization. The proposed stacking optimization requires making the gross weight of forgings as close to the maximum batch capacity as possible. The above research can help reduce the heating times, and increase furnace utilization with high energy efficiency and low carbon emissions.

  7. Improvement of mechanical properties of zirconia-toughened alumina by sinter forging

    NARCIS (Netherlands)

    He, Y.; Winnubst, Aloysius J.A.; Verweij, H.; Burggraaf, Anthonie; Burggraaf, A.J.

    1994-01-01

    ZTA powder with a composition of 85 wt% alumina/15 wt% zirconia was prepared by a gel precipitation method. Sinter forging was performed with this powder to enhance the mechanical properties of ZTA materials. The influence of processing flaws on mechanical properties of sinter forged materials and

  8. Comparative Thermal Aging Effects on PM-HIP and Forged Inconel 690

    Science.gov (United States)

    Bullens, Alexander L.; Bautista, Esteban; Jaye, Elizabeth H.; Vas, Nathaniel L.; Cain, Nathan B.; Mao, Keyou; Gandy, David W.; Wharry, Janelle P.

    2018-03-01

    This study compares thermal aging effects in Inconel 690 (IN690) produced by forging and powder metallurgy with hot isostatic pressing (PM-HIP). Isothermal aging is carried out over 400-800°C for up to 1000 h and then metallography and nanoindentation are utilized to relate grain microstructure with hardness and yield strength. The PM-HIP IN690 maintains a constant grain size through all aging conditions, while the forged IN690 exhibits limited grain growth at the highest aging temperature and longest aging time. The PM-HIP IN690 exhibits comparable mechanical integrity as the forged material throughout aging: hardness and yield strength are unchanged with 100 h aging, but increase after 1000 h aging at all temperatures. In both the PM-HIP and forged IN690, the Hall-Petch relationship for Ni-based superalloys predicts yield strength for 0-100 h aged specimens, but underestimates yield strength in the 1000 h aged specimens because of thermally induced precipitation.

  9. Vendor Furnished Information (VFI); National Marine Standard VFI Guidelines

    Science.gov (United States)

    1999-02-28

    vendors have global marketing perspectives and are continuously monitoring and applying innovations in technology. They propose new opportunities from the...strategic impact on shipbuilding programs. These vendors have global marketing perspectives and are continuously monitoring and applying innovations in

  10. Manufacturing and properties of closure head forging integrated with flange for PWR reactor pressure vessel

    International Nuclear Information System (INIS)

    Tomoharu Sasaki; Iku Kurihara; Etsuo Murai; Yasuhiko Tanaka; Koumei Suzuki

    2003-01-01

    Closure head forging (SA508, Gr.3 Cl.1) integrated with flange for PWR reactor pressure vessel has been developed. This is intended to enhance structural integrity of closure head resulted in elimination of ISI, by eliminating weld joint between closure head and flange in the conventional design. Manufacturing procedures have been established so that homogeneity and isotropy of the material properties can be assured in the closure head forging integrated with flange. Acceptance tensile and impact test specimens are taken and tested regarding the closure head forging integrated with flange as very thick and complex forgings. This paper describes the manufacturing technologies and material properties of the closure head forging integrated with flange. (orig.)

  11. Selection of Vendor Based on Intuitionistic Fuzzy Analytical Hierarchy Process

    Directory of Open Access Journals (Sweden)

    Prabjot Kaur

    2014-01-01

    Full Text Available Business environment is characterized by greater domestic and international competitive position in the global market. Vendors play a key role in achieving the so-called corporate competition. It is not easy however to identify good vendors because evaluation is based on multiple criteria. In practice, for VSP most of the input information about the criteria is not known precisely. Intuitionistic fuzzy set is an extension of the classical fuzzy set theory (FST, which is a suitable way to deal with impreciseness. In other words, the application of intuitionistic fuzzy sets instead of fuzzy sets means the introduction of another degree of freedom called nonmembership function into the set description. In this paper, we proposed a triangular intuitionistic fuzzy number based approach for the vendor selection problem using analytical hierarchy process. The crisp data of the vendors is represented in the form of triangular intuitionistic fuzzy numbers. By applying AHP which involves decomposition, pairwise comparison, and deriving priorities for the various levels of the hierarchy, an overall crisp priority is obtained for ranking the best vendor. A numerical example illustrates our method. Lastly a sensitivity analysis is performed to find the most critical criterion on the basis of which vendor is selected.

  12. Assessing market competition and vendors' size and scope on AlphaBay.

    Science.gov (United States)

    Paquet-Clouston, Masarah; Décary-Hétu, David; Morselli, Carlo

    2018-04-01

    Since 2011, drug market participants have traded illegal drugs through cryptomarkets, a user-friendly infrastructure in which drug market participants can conduct business transactions. This study assesses market competition and the size and scope of drug vendors' activities on one of the largest cryptomarkets, AlphaBay, in order to better understand the challenges that drug vendors face when selling on this venue. Relying on data collected from AlphaBay, we calculate the degree of competition within the drug market using the Herfindhal-Hirshmann Index (HHI). We then follow a micro analytical approach and assess the size and scope of vendors' accounts. This is done by evaluating each vendor's market share over time using a group-based trajectory model (GBTM). Results from the GBTM are then used to assess vendors' exposure, diversity and experience based on their selling position in the market. The HHI scores demonstrate that cryptomarkets offer a highly competitive environment that fits in a top-heavy market structure. However, the distribution of vendors' market share trajectories shows that only a small portion of vendors (referred to as high-level vendors) succeed in generating regular sales, whereas the majority of vendors are relegated to being mere market spectators with almost zero sales. This inequality is exacerbated by the aggressive advertising of high-level vendors who post many listings. Overall, product diversity and experience is limited for all market participants regardless of their level of success. We interpret these results through Reuter's work on traditional illegal markets, e-commerce studies and the growing field of cryptomarket research. We conclude that, while offering a new venue for illegal drug transactions, in many ways, the economics of cryptomarkets for drug dealing are consistent with Reuter's classic assessment of illegal markets and the consequences of product illegality that underlie it. Cryptomarkets conflicting features, a

  13. Deployment of vendor innovation capability in contract electronic manufacturing

    DEFF Research Database (Denmark)

    Perunovic, Zoran; Mefford, Robert N.

    2012-01-01

    This paper explores deployment of innovation capability in outsourcing from the vendor perspective. Vendor’s innovation-related competences are used to capture vendor innovativeness. A multiple-case study was applied with two Contract Electronic Manufacturers. Based on the data analysis we propose...

  14. Portfolio allocation under the vendor managed inventory: A Markov ...

    African Journals Online (AJOL)

    Portfolio allocation under the vendor managed inventory: A Markov decision process. ... Journal of Applied Sciences and Environmental Management ... This study provides a review of Markov decision processes and investigates its suitability for solutions to portfolio allocation problems under vendor managed inventory in ...

  15. Fatigue in cold-forging dies: Tool life analysis

    DEFF Research Database (Denmark)

    Skov-Hansen, P.; Bay, Niels; Grønbæk, J.

    1999-01-01

    In the present investigation it is shown how the tool life of heavily loaded cold-forging dies can be predicted. Low-cycle fatigue and fatigue crack growth testing of the tool materials are used in combination with finite element modelling to obtain predictions of tool lives. In the models...... the number of forming cycles is calculated first to crack initiation and then during crack growth to fatal failure. An investigation of a critical die insert in an industrial cold-forging tool as regards the influence of notch radius, the amount and method of pre-stressing and the selected tool material...

  16. An integrated vendor-buyer model with stock-dependent demand

    DEFF Research Database (Denmark)

    Sajadieh, Mohsen S.; Thorstenson, Anders; Akbari Jokar, Mohammad R.

    in a display area. The end-customer demand is assumed to be positively dependent on the amount of items shown in the display area. With the proposed model we determine the buyer's optimal shipment quantity and number of shipments, as well as the vendor's optimal production batch. The objective is to maximize...... total supply chain profit. The numerical analysis shows that it is more profitable for the buyer and the vendor to cooperate in situations when the demand is more stock-dependent. The analysis also shows the effect of double marginalization in this integrated vendor-buyer model....

  17. An integrated vendor-buyer model with stock-dependent demand

    DEFF Research Database (Denmark)

    Sajadieh, Mohsen S.; Thorstenson, Anders; Akbari Jokar, Mohammad R.

    2010-01-01

    We develop an integrated vendor-buyer model for a two-stage supply chain. The vendor manufactures the product and delivers it in a number of equal-sized batches to the buyer. The items delivered are presented to the end customers in a display area. Demand is assumed to be positively dependent...... on the amount of items displayed. The objective is to maximize total supply chain profit. The numerical analysis shows that buyer-vendor coordination is more profitable in situations when demand is more stock dependent. It also shows that the effect of double marginalization provides a link between the non...

  18. An Integrated Vendor-Buyer Model with Stock-Dependent Demand

    DEFF Research Database (Denmark)

    Thorstenson, Anders; Sajadieh, Mohsen S.; Akbari Jokar, Mohammad R.

    2009-01-01

    in the buyer's warehouse. The demand is assumed to be positively dependent on the amount of items shown in the display area. The proposed model determines the buyer's optimal shipment quantity and number of shipments, as well as the vendor's optimal production batch. The objective is to maximize total supply......-chain profit. The numerical analysis shows that as long as the maximum display area is not used, it is more valuable for the buyer and the vendor to cooperate in situations when the demand is more stock- dependent. It also shows the effect of double marginalization in this integrated vendor-buyer model....

  19. Design and verification of thermomechanical parameters of P/M Ti6Al4V alloy forging

    Energy Technology Data Exchange (ETDEWEB)

    Wojtaszek, Marek, E-mail: mwojtasz@metal.agh.edu.pl; Śleboda, Tomasz

    2014-12-05

    Highlights: • Thermomechanical parameters of P/M Ti6Al4V alloy processing were determined. • The use of the mixture of elemental powders allows reducing manufacturing costs. • Numerical modelling allowed to elaborate favourable parameters of forging. • The industrial trials of hot forging of P/M Ti6Al4V alloy were successful. - Abstract: This work is focused on the design of technology of forging high-quality Ti6Al4V alloy by means of powder metallurgy methods. A mixture of elemental powders, with the chemical composition of that of Ti6Al4V alloy, was used as a starting material for the investigation. Powder mixtures were fully densified by hot compaction under precisely controlled conditions. The mechanical properties of the obtained compacts were examined. The mechanical behaviour of the investigated alloy powder compacts was evaluated by compression test under various thermomechanical conditions using Gleeble simulator. The microstructure of powder compacts as well as P/M alloy samples deformed in compression tests was examined. All data obtained from the experimental tests were applied as boundary conditions for numerical simulation of forging of selected forgings. Basing on the results of both plastometric tests and simulations, thermomechanical parameters of the investigated alloy forging were determined. Designed parameters of forging technology were verified by forging trials performed in industrial conditions. The quality of the obtained forgings was examined by means of computed tomography.

  20. Effect of forging process on microstructure, mechanical and corrosion properties of biodegradable Mg-1Ca alloy

    International Nuclear Information System (INIS)

    Harandi, Shervin Eslami; Hasbullah Idris, Mohd; Jafari, Hassan

    2011-01-01

    Research highlights: → Forging temperature demonstrates more pronounced effect compared to forging speed. → Precipitation of Mg 2 Ca phase at grain boundaries accelerates corrosion rate. → Forging process doesn't provide the corrosion resistance required for bone healing. -- Abstract: The performance of Mg-1Ca alloy, a biodegradable metallic material, may be improved by hot working in order that it may be of use in bone implant applications. In this study, Mg-1Ca cast alloy was preheated to different temperatures before undergoing forging process with various forging speeds. Macro- and microstructure of the samples were examined by stereo and scanning electron microscopes (SEM) equipped with energy dispersive X-ray spectroscopy (EDS), respectively. To determine the mechanical properties of the alloy, hardness value and plastic deformation ability of the samples were measured. To investigate the corrosion behaviour of the alloy, immersion and electrochemical tests were performed on the samples in simulated body fluid and the corrosion products were characterized by SEM/EDS. The results showed that increasing forging temperature decreased grain size led to improved hardness value and plastic deformation ability of the alloy, whereas no significant effect was observed by changing forging speed. Moreover, forging at higher temperatures led to an increase in the amount of Mg 2 Ca phase at grain boundaries resulted in higher corrosion rates. It can be concluded that although forging process improved the mechanical properties of the alloy, it does not satisfy the corrosion resistance criteria required for bone healing.

  1. Design and verification of thermomechanical parameters of P/M Ti6Al4V alloy forging

    International Nuclear Information System (INIS)

    Wojtaszek, Marek; Śleboda, Tomasz

    2014-01-01

    Highlights: • Thermomechanical parameters of P/M Ti6Al4V alloy processing were determined. • The use of the mixture of elemental powders allows reducing manufacturing costs. • Numerical modelling allowed to elaborate favourable parameters of forging. • The industrial trials of hot forging of P/M Ti6Al4V alloy were successful. - Abstract: This work is focused on the design of technology of forging high-quality Ti6Al4V alloy by means of powder metallurgy methods. A mixture of elemental powders, with the chemical composition of that of Ti6Al4V alloy, was used as a starting material for the investigation. Powder mixtures were fully densified by hot compaction under precisely controlled conditions. The mechanical properties of the obtained compacts were examined. The mechanical behaviour of the investigated alloy powder compacts was evaluated by compression test under various thermomechanical conditions using Gleeble simulator. The microstructure of powder compacts as well as P/M alloy samples deformed in compression tests was examined. All data obtained from the experimental tests were applied as boundary conditions for numerical simulation of forging of selected forgings. Basing on the results of both plastometric tests and simulations, thermomechanical parameters of the investigated alloy forging were determined. Designed parameters of forging technology were verified by forging trials performed in industrial conditions. The quality of the obtained forgings was examined by means of computed tomography

  2. Manufacturing of large and integral-type steel forgings for nuclear steam supply system components

    International Nuclear Information System (INIS)

    Kawaguchi, S.; Tsukada, H.; Suzuki, K.; Sato, I.; Onodera, S.

    1986-01-01

    Forgings for the reactor pressure vessel (RPV) of the pressurized heavy water reactor (PHWR) 700 MWe, which is composed of seven major parts and nozzles totaling about 965 tons, were successfully developed. These forgings are: 1. Flanges: an outside diameter of 8440 mm and a weight of 238 tons max, requiring an ingot of 570 tons. 2. Shells and torus: an outside diameter of about 8000 mm with large height. 3. Cover dome: a diameter of 6800 mm and a thickness of 460 mm, requiring a blank forging before forming of 8000 mm in diameter and 550 m thick. The material designation is 20Mn-Mo-Ni 5 5 (equivalent to SA508, Class 3). In this paper, the manufacturing of and the properties of such large and integral forgings are discussed, including an overview of manufacturing processes for ultralarge-sized forgings over the last two decades

  3. New design of process for cold forging to improve multi-stage gas fitting

    Directory of Open Access Journals (Sweden)

    Han-Sung Huang

    2016-04-01

    Full Text Available This work develops a process that solves the problem of the formation of cracks inside forged gas fittings in the cold forging process that arises from poor forging process design. DEFORM-3D forming software was utilized, and macroscopic experiments with optical microscopy and scanning electron microscopy were conducted to investigate the processed structures and the distribution therein of metal flow lines, and to find the internal micro-cracks to determine whether the cold forging process is reasonable. Analytical results herein demonstrate that the stress and strain inside the gas fitting can be elucidated using metal forming software. Together with experimental results, they demonstrate that a concentration of stress damages the workpiece in the forming process. Moreover, as metal flow lines become narrower, the workpiece becomes more easily damaged. Consequently, the improved cold forging process that is described in this work should be utilized to reduce the occurrence of fine cracks and defects. Planning for proper die design and production, increasing the quality of products, and reducing the number of defective products promote industrial competitiveness.

  4. Allegheny County WIC Vendor Locations

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset contains the locations of Women, Infants, and Children (WIC) program vendors. If viewing this description on the Western Pennsylvania Regional Data...

  5. Managing Tensions And Forging Creative Synergies Between ...

    African Journals Online (AJOL)

    Managing Tensions And Forging Creative Synergies Between Indigenous And Modern Settlement Planning Concepts And Practices: Lessons For The Design And Planning For Sustainable Settlements And Built-Forms In Southern Africa.

  6. Blastocystis hominis among food vendors in Xochimilco markets.

    Science.gov (United States)

    Cruz Licea, Verónica; Plancarte Crespo, Agustín; Morán Alvarez, Cristina; Valencia Rojas, Silvia; Rodríguez Sásnchez, Gustavo; Vega Franco, Leopoldo

    2003-01-01

    Blastocystis hominis is a pathogenic protozoon that lives in the human bowel and causes diarrhea: the mode of transmission is a passive one, through the ingestion of stool-contaminated water or foods that contain infective forms of the parasite. The purpose of this study is to report the prevalence of Blastocystis hominis among food vendors in the markets within the Xochimilco jurisdiction, Mexico City, Mexico. A cross-sectional study was conducted in which food vendors answered an epidemiological questionnaire and underwent a serial stool culture. The frequency of the intestinal parasitoses reported was estimated and an analysis was carried out associating the presence of Blastocystis hominis with socio-economic and hygienic factors using the odds ratio at a 95% confidence interval. The frequency of intestinal parasites and commensals was 50.4%; Blastocystis hominis was found in 48 (41.7%) food vendors. The risk analysis showed that Blastocystis hominis was associated with: male gender, poor personal hygiene habits, personal history of parasitosis, and family history of parasitosis. The prevalence reported is high when compared with other populations studied. The relevance of this report lies on the fact that food vendors handle foods and could transmit the infection to consumers.

  7. Business challenges in the vendor community. Panel Discussion

    International Nuclear Information System (INIS)

    Stamm, Steve; Sauger, John; Marano, Mark; Shave, Dana; Pierce, Robert; Smiarowski, Michael W.

    2001-01-01

    Full text of publication follows: The nuclear business community is undergoing immense changes and challenges due to consolidation of the power industry and plant owners, shifts in the needs of plant owners, addition of new competitors, loss of old competitors, aging of the workforce, loss of personnel to competing industries, and the advances in electronic communications. These changes have significantly perturbed existing business models and relationships in the nuclear industry as well as the broader power, engineering, construction, equipment, and commodities fields. Vendors have responded to these challenges in a number of different ways. The participants for this panel have been selected from a diverse set of vendor organization types so that a broad spectrum of evaluation and approaches will be discussed. The participants in this panel discussion will provide insights into their views of the challenges to a successful nuclear business. They will provide insights into the expectations and approaches by each party in the client vendor relationship. Also discussed will be an overview of the strategies that each panelist views as potential success paths to nurture and grow the client-vendor relationship today with their insights into the future. (authors)

  8. Strain-induced grain growth of cryomilled nanocrystalline Al in trimodal composites during forging

    International Nuclear Information System (INIS)

    Yao, B.; Simkin, B.; Majumdar, B.; Smith, C.; Bergh, M. van den; Cho, K.; Sohn, Y.H.

    2012-01-01

    Highlights: ► Grain growth of cryomilled nanocrystalline aluminum during hot forging. ► Use of hollow cone dark field imaging technique in TEM for grain size measurement. ► Grain growth model of strain, strain rate and temperature for forging optimization. - Abstract: Grain growth of nanocrystalline aluminum ( nc Al) in trimodal Al metal-matrix-composites (MMCs) during hot forging was investigated. The nc Al phase formed through cryomilling of inert gas-atomized powders in liquid nitrogen has an average grain size down to 21 nm, exhibits excellent thermal stability. However, substantial grain growth of nc Al up to 63 nm was observed when the Al MMCs were thermo-mechanically processed even at relatively low temperatures. Grain growth of the cryomilled nc Al phase in trimodal Al MMCs after hot forging was documented with respect to temperature ranging from 175 °C to 287 °C, true strain ranging from 0.4 to 1.35 and strain rate ranging from 0.1 to 0.5 s −1 . Hollow cone dark field imaging technique was employed to provide statistically confident measurements of nc Al grain size that ranged from 21 to 63 nm. An increase in forging temperature and an increase in true strain were correlated with an increase in grain size of nc Al. Results were correlated to devise a phenomenological grain growth model for forging that takes strain, strain rate and temperature into consideration. Activation energy for the grain growth during thermo-mechanical hot-forging was determined to be 35 kJ/mol, approximately a quarter of activation energy for bulk diffusion of Al and a half of activation energy for static recrystallization.

  9. 11 CFR 100.78 - Sale of food or beverages by vendor.

    Science.gov (United States)

    2010-01-01

    ... 11 Federal Elections 1 2010-01-01 2010-01-01 false Sale of food or beverages by vendor. 100.78...) Exceptions to Contributions § 100.78 Sale of food or beverages by vendor. The sale of any food or beverage by... contribution, provided that the charge is at least equal to the cost of such food or beverage to the vendor, to...

  10. Forged Signature Distinction Using Convolutional Neural Network for Feature Extraction

    Directory of Open Access Journals (Sweden)

    Seungsoo Nam

    2018-01-01

    Full Text Available This paper proposes a dynamic verification scheme for finger-drawn signatures in smartphones. As a dynamic feature, the movement of a smartphone is recorded with accelerometer sensors in the smartphone, in addition to the moving coordinates of the signature. To extract high-level longitudinal and topological features, the proposed scheme uses a convolution neural network (CNN for feature extraction, and not as a conventional classifier. We assume that a CNN trained with forged signatures can extract effective features (called S-vector, which are common in forging activities such as hesitation and delay before drawing the complicated part. The proposed scheme also exploits an autoencoder (AE as a classifier, and the S-vector is used as the input vector to the AE. An AE has high accuracy for the one-class distinction problem such as signature verification, and is also greatly dependent on the accuracy of input data. S-vector is valuable as the input of AE, and, consequently, could lead to improved verification accuracy especially for distinguishing forged signatures. Compared to the previous work, i.e., the MLP-based finger-drawn signature verification scheme, the proposed scheme decreases the equal error rate by 13.7%, specifically, from 18.1% to 4.4%, for discriminating forged signatures.

  11. IPAD: A computer vendor's perspective

    Science.gov (United States)

    Feldman, H. D.

    1980-01-01

    The current IPAD technology and the state-of-the-art in computer technology are compared from the point of view of a computer vendor. Issues of engineering data management, distributed architectures, and user interfaces are covered.

  12. Distribution of Microstructure and Vickers Hardness in Spur Bevel Gear Formed by Cold Rotary Forging

    Directory of Open Access Journals (Sweden)

    Wuhao Zhuang

    2014-11-01

    Full Text Available Cold rotary forging is a novel metal forming technology which is widely used to produce the high performance gears. Investigating the microstructure and mechanical property of cold rotary forged gears has a great significance in improving their service performance. In this study, the grain morphology in different regions of the spur bevel gear which is processed by cold rotary forging is presented. And the distribution regulars of the grain deformation and Vickers hardness in the transverse and axial sections of the gear tooth are studied experimentally. A three-dimensional rigid-plastic FE model is developed to simulate the cold rotary forging process of a spur bevel gear under the DEFORM-3D software environment. The variation of effective strain in the spur bevel gear has been investigated so as to explain the distribution regulars of the microstructure and Vickers hardness. The results of this research thoroughly reveal the inhomogeneous deformation mechanisms in cold rotary forging of spur bevel gears and provide valuable guidelines for improving the performance of cold rotary forged spur bevel gears.

  13. 76 FR 30200 - Forging Machines; Extension of the Office of Management and Budget's (OMB) Approval of...

    Science.gov (United States)

    2011-05-24

    ...] Forging Machines; Extension of the Office of Management and Budget's (OMB) Approval of Information... extend OMB approval of the information collection requirements contained in the Forging Machines Standard... to reduce employees' risk of death or serious injury by ensuring that forging machines used by them...

  14. Effect of Forging Allowance Value on the Power Consumption of Machining Process

    Directory of Open Access Journals (Sweden)

    L. D. Mal'kova

    2015-01-01

    Full Text Available The paper aim is to develop and study possible energy-efficiency measures for machined forgings drawing on analysis of the impact of the allowance for machining and its scatter.The most sophisticated option to take into consideration the effect of the cut depth is the work-piece machining in which the forging allowance value results from the blank production.Research of power consumption was conducted for turning the cylindrical surface of 144 mm length and  1,5 33 0,5   diameter on forgings of the work-pieces "screw of steering control" made from steel 60PP. A radial dimension allowance at said cylindrical surface at six points of the five sections was sized to assess the allowance value dispersion. The size of the sample measurements at the control points was n = 600. Statistic processing has shown normal law of distribution and sample homogeneity.To analyze the results of experiments was calculated a range of allowances for this workpiece. Calculated minimum and maximum allowance per one side for rough lathing were, respectively, 0.905 mm and 1.905mm. It was found that 77% points under control lie in calculated range of allowance values. And there are no points out of the range on lesser side that proves a lack of rejects; but there are points out of the range on the bigger side, that will require additional costs for machining the specified surface, including the cost of electricity.There were three power consumption calculations based on factory- recommended duty: for processing the entire sample of forgings with an average allowance, for machining forgings allowances of which are within the recommended design range of allowance, and for processing the entire sample of forgings with a minimum value of allowance.It was found that elimination of allowance values which are outside the recommended range enables to reduce the power consumption, at least, by 6%, and the overall power consumption for processing the measured forgings

  15. IT vendor selection model by using structural equation model & analytical hierarchy process

    Science.gov (United States)

    Maitra, Sarit; Dominic, P. D. D.

    2012-11-01

    Selecting and evaluating the right vendors is imperative for an organization's global marketplace competitiveness. Improper selection and evaluation of potential vendors can dwarf an organization's supply chain performance. Numerous studies have demonstrated that firms consider multiple criteria when selecting key vendors. This research intends to develop a new hybrid model for vendor selection process with better decision making. The new proposed model provides a suitable tool for assisting decision makers and managers to make the right decisions and select the most suitable vendor. This paper proposes a Hybrid model based on Structural Equation Model (SEM) and Analytical Hierarchy Process (AHP) for long-term strategic vendor selection problems. The five steps framework of the model has been designed after the thorough literature study. The proposed hybrid model will be applied using a real life case study to assess its effectiveness. In addition, What-if analysis technique will be used for model validation purpose.

  16. Space Livability of Street Vendors in Simpang Lima Public Space, Semarang

    Science.gov (United States)

    Widjajanti, R.; Wahyono, H.

    2018-02-01

    Street vendors in Semarang have been growing rapidly and uncontrolled. They always use public space such as public roads, sidewalks, parks and fields as trading locations. The street vendors’ activities in the public space are considered as the cause of declining on environmental quality and aesthetics of the city. All these years, the government often evicted the street vendors than organized and provides adequate space for them. As one of the actual urban activities, the street vendors’ activities should be accommodated by the government and the location for them is managed in the urban spatial plan. Street vendors need spaces which livable and suitable to their activities’ requirements, has a relationship with users (street vendors’ doers and consumers) and the activities of street vendors themselves. Research on the aspect of space for street vendors is still less in quantity, whereas space for them is an urgent matter for the government in managing their activities. This study aims to identify the livability of space based on the street vendors’ behavior in their location. This research used descriptive quantitative method with questionnaires and GIS as the mapping tool for street vendors’ location. The result of the research shows that the livability of street vendor space is based on the activity of street vendors (type of merchandise, trading places’ size, trade place assessment, space dimension, trading time, duration and period) and space conditions (access, natural elements, safety and parking space).

  17. Hygiene practices among street food vendors in Tamale Metropolis ...

    African Journals Online (AJOL)

    The study noted that street food business in the Tamale Metropolis was women dominated (76%). Majority of vendors (78%) were aged 20-39 years. Public toilets (pit latrines) were accessible to all vending sites. Though high number of street food vendors had some form of formal education (66%) and knowledge of food ...

  18. Computer Οptimization of Geometric Form of Tool and Preform for Closed-die Forging of Compressor Blade Simulator

    Directory of Open Access Journals (Sweden)

    A. V. Botkin

    2014-07-01

    Full Text Available Using the software package DEFORM 3D when developing technology of isothermal forging workpiece blades it is possible to reduce the pre-production time, to improve the quality of forgings and increase lifetime of forging dies. Computer modeling allows to predict the formation of such defects during forging as notches and wrinkles, underfilling of die impression, to estimate tool loads. Preform shape and angular position of the blade simulator were optimized in order to minimize the lateral forces generated during the forging operation.

  19. Manufacture of large monoblock LP rotor forgings and their quality

    International Nuclear Information System (INIS)

    Suzuki, Akira; Kinoshita, Shushi; Kohno, Masayoshi; Miyakawa, Mutsuhiro; Kikuchi, Hideo

    1986-01-01

    This paper describes the manufacturing and the quality of large monoblock low pressure rotors forged from 360 ton and 420 ton ingots. To obtain good and homogenous mechanical properties throughout a rotor, a computer was used to determine the heat treatment conditions. It was found that the technique was very effective at predicting mechanical properties of a monoblock rotor. Mechanical properties including the fracture toughness and fatigue crack propagation characteristics of monoblock rotor forgings proved satisfactory. (author)

  20. Expedited, uniform processing of multi-vendor gamma test data

    International Nuclear Information System (INIS)

    Zimmerman, R.E.

    2002-01-01

    Aim: Acceptance testing of gamma camera performance is time consuming. When data is collected from different vendors image format and methodology differences can result in disjointed and difficult to compare results. Even when performing NEMA specified tests consistent processing of data from multi-vendor cameras results in methodological inconsistencies. A more uniform and consistent method to process data collected from gamma cameras would be a boon to those involved in acquiring and processing such test data. Methods and Materials: Image J is an image processing program freely available on the Web at http://rsb.info.nih.gov/ij/. It can be run using a normal Web browser or installed on any computer. Since it is written in Java it is platform and operating system independent. Image J is very extensible, object based and has a large international user community in many imaging disciplines. Extensions to Image J are written using the Java programming language and the internal macro recording facility. Image J handles multiple image formats useful in nuclear medicine including DICOM, RAW, BMP, JPG, Interfile, AVI and QT. Extensions have been written to process and determine gamma camera intrinsic and extrinsic uniformity, COR errors, planar extrinsic resolution and reconstructed spatial resolution. The testing and processing adhere closely to NEMA specified procedures and result in quantitative measures of performance traceable to NEMA and manufacturers specifications. Results and Conclusions: Extensions to Image J written specifically to process gamma camera acceptance test data have resulted in considerable decrease in time to complete the analysis and allows a consistent, vendor independent, method to measure performance of cameras from multiple vendors. Quality control images from multiple camera vendors are also easily processed in a consistent fashion. The availability of this or similar platform and vendor independent software should lead to more complete

  1. Identification of forged Bank of England £20 banknotes using IR spectroscopy.

    Science.gov (United States)

    Sonnex, Emily; Almond, Matthew J; Baum, John V; Bond, John W

    2014-01-24

    Bank of England notes of £20 denomination have been studied using infrared spectroscopy in order to generate a method to identify forged notes. An aim of this work was to develop a non-destructive method so that a small, compact Fourier transform infrared spectrometer (FT-IR) instrument could be used by bank workers, police departments or others such as shop assistants to identify forged notes in a non-lab setting. The ease of use of the instrument is the key to this method, as well as the relatively low cost. The presence of a peak at 1400 cm(-1) arising from νasym (CO3(2-)) from the blank paper section of a forged note proved to be a successful indicator of the note's illegality for the notes that we studied. Moreover, differences between the spectra of forged and genuine £20 notes were observed in the ν(OH) (ca. 3500 cm(-1)), ν(C-H) (ca. 2900 cm(-1)) and ν(C=O) (ca. 1750 cm(-1)) regions of the IR spectrum recorded for the polymer film covering the holographic strip. In cases where these simple tests fail, we have shown how an infrared microscope can be used to further differentiate genuine and forged banknotes by producing infrared maps of selected areas of the note contrasting inks with background paper. Copyright © 2013 Elsevier B.V. All rights reserved.

  2. Identification of forged Bank of England £20 banknotes using IR spectroscopy

    Science.gov (United States)

    Sonnex, Emily; Almond, Matthew J.; Baum, John V.; Bond, John W.

    2014-01-01

    Bank of England notes of £20 denomination have been studied using infrared spectroscopy in order to generate a method to identify forged notes. An aim of this work was to develop a non-destructive method so that a small, compact Fourier transform infrared spectrometer (FT-IR) instrument could be used by bank workers, police departments or others such as shop assistants to identify forged notes in a non-lab setting. The ease of use of the instrument is the key to this method, as well as the relatively low cost. The presence of a peak at 1400 cm-1 arising from νasym (CO32-) from the blank paper section of a forged note proved to be a successful indicator of the note's illegality for the notes that we studied. Moreover, differences between the spectra of forged and genuine £20 notes were observed in the ν(OH) (ca. 3500 cm-1), ν(Csbnd H) (ca. 2900 cm-1) and ν(Cdbnd O) (ca. 1750 cm-1) regions of the IR spectrum recorded for the polymer film covering the holographic strip. In cases where these simple tests fail, we have shown how an infrared microscope can be used to further differentiate genuine and forged banknotes by producing infrared maps of selected areas of the note contrasting inks with background paper.

  3. Intersubjective decision-making for computer-aided forging technology design

    Science.gov (United States)

    Kanyukov, S. I.; Konovalov, A. V.; Muizemnek, O. Yu.

    2017-12-01

    We propose a concept of intersubjective decision-making for problems of open-die forging technology design. The intersubjective decisions are chosen from a set of feasible decisions using the fundamentals of the decision-making theory in fuzzy environment according to the Bellman-Zadeh scheme. We consider the formalization of subjective goals and the choice of membership functions for the decisions depending on subjective goals. We study the arrangement of these functions into an intersubjective membership function. The function is constructed for a resulting decision, which is chosen from a set of feasible decisions. The choice of the final intersubjective decision is discussed. All the issues are exemplified by a specific technological problem. The considered concept of solving technological problems under conditions of fuzzy goals allows one to choose the most efficient decisions from a set of feasible ones. These decisions correspond to the stated goals. The concept allows one to reduce human participation in automated design. This concept can be used to develop algorithms and design programs for forging numerous types of forged parts.

  4. A structural model of customer satisfaction and trust in vendors involved in mobile commerce

    Directory of Open Access Journals (Sweden)

    Suki, N.M.

    2011-01-01

    Full Text Available The purpose of this paper is to provide an explanation of factors influencing customer satisfaction and trust in vendors involved in mobile commerce (m-commerce. The study sample consists of 200 respondents. Data were analyzed by employing structural equation modelling (SEM supported by AMOS 5.0 with maximum likelihood estimation in order to test the proposed hypotheses. The proposed model was empirically tested and results confirmed that users’ satisfaction with vendors in m-commerce was not significantly influenced by two antecedents of the vendor’s website quality: interactivity and customisation, and also two antecedents of mobile technology quality: usefulness and ease-of-use. Meanwhile, users’ trust towards the vendor in m-commerce is affected by users’ satisfaction with the vendor. Interestingly, vendor quality dimensions such as responsiveness and brand image influence customer satisfaction with vendors in m-commerce. Based on the findings, vendors in m-commerce should focus on the factors which generate more satisfaction and trust among customers. For vendors in general, the results can help them to better develop customer trust in m-commerce. Vendors of m-commerce can provide a more satisfying experience for customers.

  5. The relationship between UT reported size and actual size of the defects in rotor forgings

    International Nuclear Information System (INIS)

    Seong, Un Hak; Kim, Jeong Tae; Park, Yun Sik

    2003-01-01

    In order to evaluate the reliability of rotor forgings, it is very important to know the actual size of the defects in the rotor forgings. The determination of the defect size requires the accurate non-destructive measurement. However, there may be some differences between the reported size with the ultrasonic non-destructive testing method and the actual size of defects. These differences may be a severe cause of errors in evaluation of rotor forgings. So, the calculated size with 'Master Curve' considering safety factor, which is usually larger than the reported size, has been used in evaluation of rotor forgings. The relation between the EFBH (Equivalent Flat Bottom Hole) size measured by non-destructive method and the actual size by destructive method in many rotors manufactured at Doosan was investigated. In this investigation 'Master Curve' compensating the differences between UT reported size and actual size of defects in our rotor forgings was obtainable. The applicability of this 'Master Curve' as a way of calculating the actual defect size was also investigated. For the evaluation of rotor forgings, it is expected that this 'Master Curve' may be used to determine the accurate actual size of defects.

  6. The relationship between UT reported size and actual size of the defects in rotor forgings

    International Nuclear Information System (INIS)

    Seong, Un Hak; Kim, Jeong Tae; Park, Yun Sik

    2003-01-01

    In order to evaluate the reliability of rotor forgings, it is very important to know the actual size of the defects in the rotor forgings. The determination of the defect size requires the accurate non-destructive measurement. However, there may be some difference between the reported size with ultrasonic non-destructive testing method and the actual size of defects. These differences may be a severe cause of errors in evaluation of rotor forgings. So, the calculated size with 'Master Curve' considering safety factor, which is usually larger than the reported size, has been used in evaluation of rotor forgings. The relation between the EFBH (Equivalent Flat Bottom Hole) size measured by non-destructive method and the actual size by destructive method in many rotors manufactured at Doosan was investigated. In this investigation, 'Master Curve' compensating the differences between UT reported size and actual size of defects in our rotor forgings was obtainable. The applicability of this 'Master Curve' as a way of calculating the actual defect size was also investigated. For the evaluation of rotor forgings, it is expected that this 'Master Curve' may be used to determine the accurate actual size of defects.

  7. Fabrication and properties of Y-Ba-Cu-O high Tc superconductor by upset-forging method

    International Nuclear Information System (INIS)

    Chang, Ho Jung; Kang, Kae Myung; Song, Jin Tae

    1990-01-01

    YBa 2 Cu 3 O 7-x oxide superconductors was fabricated by sintering process and upset-forging method, respectively, and microstructures and conduction properties were compared. There was no difference in crystal structure the (001) x-ray reflection presumably due to preferred crystal orientation of the YBa 2 Cu 3 O 7-x superconductor. Furthermore, the grain size of the 123-phase increased as the reduction ratio became larger during the upset-forging. The critical temperature for zero resistivity of both samples was almost the same, i.e., about 90K. These results have demonstrated the potential of producing YBa 2 Cu 3 O 7-x superconducting wire or tape effectively using a upset-forging method. The critical current density of the upset-forged sample, however, was lower than that of the sintered one, which fact might be ascribed to microcrack formation during fast upset-forging. (Author)

  8. An analysis of vendor innovation capability in the contract electronics manufacturing industry

    DEFF Research Database (Denmark)

    Perunovic, Zoran; Mefford, Robert; Christoffersen, Mads

    2016-01-01

    the contract, vendors can use different configurations of the competitive priorities of cost, quality, delivery and flexibility. The research aggregates the capabilities that influence the innovative capability of a vendor into the innovation-related capabilities (IRCs) of design, new product introduction......Limited academic research has been given to analysing the innovation capabilities of vendors in outsourcing contracts. This paper seeks to address this gap in the literature by enhancing our understanding of how the innovation capability of vendors is deployed to win, run and renew outsourcing...... contracts with their customers. Employing the resource-based view as a theoretical basis and undertaking in-depth case study analysis of three vendors in the electronic manufacturing services industry, the research shows that to achieve the outsourcing objectives of winning, running and renewing...

  9. Nickel-base alloy forgings for advanced high temperature power plants

    Energy Technology Data Exchange (ETDEWEB)

    Donth, B.; Diwo, A.; Blaes, N.; Bokelmann, D. [Saarschmiede GmbH Freiformschmiede, Voelklingen (Germany)

    2008-07-01

    The strong efforts to reduce the CO{sub 2} emissions lead to the demand for improved thermal efficiency of coal fired power plants. An increased thermal efficiency can be realised by higher steam temperatures and pressures in the boiler and the turbine. The European development aims for steam temperatures of 700 C which requires the development and use of new materials and also associated process technology for large components. Temperatures of 700 C and above are too high for the application of ferritic steels and therefore only Nickel-Base Alloys can fulfill the required material properties. In particular the Nickel-Base Alloy A617 is the most candidate alloy on which was focused the investigation and development in several German and European programs during the last 10 years. The goal is to verify and improve the attainable material properties and ultrasonic detectability of large Alloy 617 forgings for turbine rotors and boiler parts. For many years Saarschmiede has been manufacturing nickel and cobalt alloys and is participating the research programs by developing the manufacturing routes for large turbine rotor forgings up to a maximum diameter of 1000 mm as well as for forged tubes and valve parts for the boiler side. The experiences in manufacturing and testing of very large forgings made from nickel base alloys for 700 C steam power plants are reported. (orig.)

  10. Vendor compliance with Ontario's tobacco point of sale legislation.

    Science.gov (United States)

    Dubray, Jolene M; Schwartz, Robert M; Garcia, John M; Bondy, Susan J; Victor, J Charles

    2009-01-01

    On May 31, 2006, Ontario joined a small group of international jurisdictions to implement legislative restrictions on tobacco point of sale promotions. This study compares the presence of point of sale promotions in the retail tobacco environment from three surveys: one prior to and two following implementation of the legislation. Approximately 1,575 tobacco vendors were randomly selected for each survey. Each regionally-stratified sample included equal numbers of tobacco vendors categorized into four trade classes: chain convenience, independent convenience and discount, gas stations, and grocery. Data regarding the six restricted point of sale promotions were collected using standardized protocols and inspection forms. Weighted estimates and 95% confidence intervals were produced at the provincial, regional and vendor trade class level using the bootstrap method for estimating variance. At baseline, the proportion of tobacco vendors who did not engage in each of the six restricted point of sale promotions ranged from 41% to 88%. Within four months following implementation of the legislation, compliance with each of the six restricted point of sale promotions exceeded 95%. Similar levels of compliance were observed one year later. Grocery stores had the fewest point of sale promotions displayed at baseline. Compliance rates did not differ across vendor trade classes at either follow-up survey. Point of sale promotions did not differ across regions in any of the three surveys. Within a short period of time, a high level of compliance with six restricted point of sale promotions was achieved.

  11. A Database for Reviewing and Selecting Radioactive Waste Treatment Technologies and Vendors

    International Nuclear Information System (INIS)

    P. C. Marushia; W. E. Schwinkendorf

    1999-01-01

    Several attempts have been made in past years to collate and present waste management technologies and solutions to waste generators. These efforts have been manifested as reports, buyers' guides, and databases. While this information is helpful at the time it is assembled, the principal weakness is maintaining the timeliness and accuracy of the information over time. In many cases, updates have to be published or developed as soon as the product is disseminated. The recently developed National Low-Level Waste Management Program's Technologies Database is a vendor-updated Internet based database designed to overcome this problem. The National Low-Level Waste Management Program's Technologies Database contains information about waste types, treatment technologies, and vendor information. Information is presented about waste types, typical treatments, and the vendors who provide those treatment methods. The vendors who provide services update their own contact information, their treatment processes, and the types of wastes for which their treatment process is applicable. This information is queriable by a generator of low-level or mixed low-level radioactive waste who is seeking information on waste treatment methods and the vendors who provide them. Timeliness of the information in the database is assured using time clocks and automated messaging to remind featured vendors to keep their information current. Failure to keep the entries current results in a vendor being warned and then ultimately dropped from the database. This assures that the user is dealing with the most current information available and the vendors who are active in reaching and serving their market

  12. Fractography analysis of tool samples used for cold forging

    DEFF Research Database (Denmark)

    Dahl, K.V.

    2002-01-01

    Three fractured tool dies used for industrial cold forging have been investigated using light optical microscopy and scanning electron microscopy. Two of the specimens were produced using the traditional Böhler P/M steel grade s790, while the lastspecimen was a third generation P/M steel produced...... using new technology developed by Böhler. All three steels have the same nominal composition of alloying elements. The failure in both types of material occurs as a crack formation at a notch inside ofthe tool. Generally the cold forging dies constructed in third generation steels have a longer lifetime...

  13. Structural changes of radial forging die surface during service under thermo-mechanical fatigue

    International Nuclear Information System (INIS)

    Nematzadeh, Fardin; Akbarpour, Mohammad Reza; Kokabi, Amir Hosein; Sadrnezhaad, Seyed Khatiboleslam

    2009-01-01

    Radial forging is one of the modern open die forging techniques and has a wide application in producing machine parts. During operation at high temperatures, severe temperature change associated with mechanical loads and the resultant wearing of the die surface lead to intense variation in strain on the die surface. Therefore, under this operating condition, thermo-mechanical fatigue (TMF) occurs on the surface of the radial forging die. TMF decreases the life of the die severely. In the present research, different layers were deposited on a 1.2714 steel die by SMAW and GTAW, with a weld wire of UDIMET 520. The microstructure of the radial forging die surface was investigated during welding and service using an optical microscope and scanning electron microscope. The results revealed that, after welding, the structure of the radial forging die surface includes the γ matrix with a homogeneous distribution of fine semi-spherical carbides. The weld structure consisted mostly of columnar dendrites with low grain boundaries. Also, microstructural investigation of the die surface during operation showed that the weld structure of the die surface has remained without any considerable change. Only dendrites were deformed and broken. Moreover, grain boundaries of the dendrites were revealed during service.

  14. A socioeconomic survey of kidney vendors in Pakistan.

    Science.gov (United States)

    Naqvi, Syed Ali Anwar; Ali, Bux; Mazhar, Farida; Zafar, Mirza Naqi; Rizvi, Syed Adibul Hasan

    2007-11-01

    In recent years, Pakistan has emerged as one of the largest centres for commerce and tourism in renal transplantation. Kidney vendors belong to Punjab in eastern Pakistan, the agricultural heartland, where 34% people live below poverty line. We report results of a socioeconomic and health survey of 239 kidney vendors. The mean age was 33.6 +/- 7.2 years (M:F 3.5:1). Mean nephrectomy period was 4.8 +/- 2.3 years. Ninety per cent of the vendors were illiterate. Sixty-nine per cent were bonded labourers who were virtual slaves to landlords, labourers 12%, housewives 8.5% and unemployed 11%. Monthly income was $US15.4 +/- 8.9 with 2-11 dependents per family. Majority (93%), vended for debt repayment with mean debt of $1311.4 +/- 819. The mean agreed sale price was $1737 +/- 262. However, they received $1377 +/- 196 after deduction for hospital and travel expenses. Postvending 88% had no economic improvement in their lives and 98% reported deterioration in general health status. Future vending was encouraged by 35% to pay off debts and freedom from bondage. This study gives a snapshot of kidney vendors from Pakistan. These impoverished people, many in bondage, are examples of modern day slavery. They will remain exploited until law against bondage is implemented and new laws are introduced to ban commerce and transplant tourism in Pakistan.

  15. Identification of Forged Bank of England 20 Gbp Banknotes Using IR Spectroscopy

    Science.gov (United States)

    Sonnex, Emily

    2014-06-01

    Bank of England notes of 20 GBP denomination have been studied using infrared spectroscopy in order to generate a method to identify forged notes. A principal aim of this work was to develop a method so that a small, compact ATR FTIR instrument could be used by bank workers, police departments or others such as shop assistants to identify forged notes in a non-lab setting. The ease of use of the instrument is the key to this method, as well as the relatively low cost. The presence of a peak at 1400 wn from the blank paper section of a forged note proved to be a successful indicator of the note's illegality for the notes that we studied. Moreover, differences between the spectra of forged and genuine 20 GBP notes were observed in the ν(OH) (ca. 3500 wn), ν(C-H) (ca. 2900 wn) and ν(C=O) (ca. 1750 wn) regions of the IR spectrum recorded for the polymer film covering the holographic strip. In cases where these simple tests fail, we have shown how an infrared microscope can be used to further differentiate genuine and forged banknotes by producing infrared maps of selected areas of the note contrasting inks with background paper. Further to this, with an announcement by the Bank of England to produce polymer banknotes in the future, the work has been extended using Australian polymer banknotes to show that the method would be transferable.

  16. Physician preference items: what factors matter to surgeons? Does the vendor matter?

    Directory of Open Access Journals (Sweden)

    Burns LR

    2018-01-01

    Full Text Available Lawton R Burns,1 Michael G Housman,2 Robert E Booth,3 Aaron M Koenig4 1Department of Health Care Management, The Wharton School, University of Pennsylvania, Philadelphia, PA, 2Singularity University, Moffett Field, CA, 33B Orthopaedics, Langhorne, PA, 4Harvard Medical School, Massachusetts General Hospital, Wang Ambulatory Care Center, Boston, MA, USA Background: The USA devotes roughly $200 billion (6% of annual national health expenditures to medical devices. A substantial proportion of this spending occurs during orthopedic (eg, hip and knee arthroplasties – two high-volume hospital procedures. The implants used in these procedures are commonly known as physician preference items (PPIs, reflecting the physician’s choice of implant and vendor used. The foundations for this preference are not entirely clear. This study examines what implant and vendor characteristics, as evaluated by orthopedic surgeons, are associated with their preference. It also examines other factors (eg, financial relationships and vendor tenure that may contribute to implant preference. Methods: We surveyed all practicing orthopedic surgeons performing 12 or more implant procedures annually in the Commonwealth of Pennsylvania. The survey identified each surgeon’s preferred hip/knee vendor as well as the factors that surgeons state they use in selecting that primary vendor. We compared the surgeons’ evaluation of multiple characteristics of implants and vendors using analysis of variance techniques, controlling for surgeon characteristics, hospital characteristics, and surgeon–vendor ties that might influence these evaluations. Results: Physician’s preference is heavily influenced by technology/implant factors and sales/service factors. Other considerations such as vendor reputation, financial relationships with the vendor, and implant cost seem less important. These findings hold regardless of implant type (hip vs knee and specific vendor. Conclusion: Our

  17. Ordering E-Books From a Print Book Vendor

    OpenAIRE

    Culley, Jennifer R.; Human, Cindy

    2017-01-01

    The University of Southern Mississippi began ordering e-books through its primary print book vendor, Midwest Library Service, in 2016. The demand to purchase e-books has steadily increased, and when the opportunity arose to save valuable staff time searching over several vendor sites for e-books and print books by consolidating the search interface, a change was made. There were multiple steps to set up this program; however, the time invested was worth it. While there were challenges along t...

  18. Vendor-buyer ordering policy when demand is trapezoidal

    Directory of Open Access Journals (Sweden)

    Digeshkumar B. Shah

    2012-10-01

    Full Text Available A joint vendor-buyer strategy is analyzed which is beneficial to both the players in the supply chain. The demand is assumed to be trapezoidal. It is established numerically that the joint venture decreases the total cost of the supply chain when compared with the independent decision of the buyer. To entice the buyer to order more units, a permissible credit period is offered by the vendor to the buyer. A negotiation factor is incorporated to share the cost savings.

  19. Manufacturing of Nanostructured Rings from Previously ECAE-Processed AA5083 Alloy by Isothermal Forging

    Directory of Open Access Journals (Sweden)

    C. J. Luis

    2013-01-01

    Full Text Available The manufacturing of a functional hollow mechanical element or ring of the AA5083 alloy previously equal channel angular extrusion (ECAE processed, which presents a submicrometric microstructure, is dealt with. For this purpose, the design of two isothermal forging dies (preform and final shape is carried out using the design of experiments (DOE methodology. Moreover, after manufacturing the dies and carrying out tests so as to achieve real rings, the mechanical properties of these rings are analysed as well as their microstructure. Furthermore, a comparison between the different forged rings is made from ECAE-processed material subjected to different heat treatments, previous to the forging stage. On the other hand, the ring forging process is modelled through the use of finite element simulation in order to improve the die design and to study the force required for the isothermal forging, the damage value, and the strain the material predeformed by ECAE has undergone. With this present research work, it is intended to improve the knowledge about the mechanical properties of nanostructured material and the applicability of this material to industrial processes that allow the manufacturing of functional parts.

  20. 17 CFR 240.3b-8 - Definitions of “Qualified OTC Market Maker, Qualified Third Market Maker” and “Qualified Block...

    Science.gov (United States)

    2010-04-01

    ... Market Maker, Qualified Third Market Makerâ and âQualified Block Positionerâ. 240.3b-8 Section 240.3b-8... “Qualified Block Positioner”. For the purposes of Regulation U under the Act (12 CFR part 221): (a) The term... inventory turnover in such security. (c) The term Qualified Block Positioner means a dealer who (1) is a...

  1. Vendor-based restrictions on pesticide sales to prevent pesticide self-poisoning - a pilot study

    Directory of Open Access Journals (Sweden)

    Manjula Weerasinghe

    2018-02-01

    Full Text Available Abstract Background In South Asia, up to 20% of people ingesting pesticides for self-poisoning purchase the pesticide from a shop with the sole intention of self-harm. Individuals who are intoxicated with alcohol and/or non-farmers represent 72% of such high-risk individuals. We aimed to test the feasibility and acceptability of vendor-based restrictions on pesticide sales for such high-risk individuals. Methods We conducted a pilot study in 14 (rural = 7, urban = 7 pesticide shops in Anuradhapura District of Sri Lanka. A two-hour training program was delivered to 28 pesticide vendors; the aim of the training was to help vendors recognize and respond to customers at high risk of pesticide self-poisoning. Knowledge and attitudes of vendors towards preventing access to pesticides for self-poisoning at baseline and in a three month follow-up was evaluated by questionnaire. Vendors were interviewed to explore the practice skills taught in the training and their assessment of the program. Results The scores of knowledge and attitudes of the vendors significantly increased by 23% (95% CI 15%–32%, p < 0.001 and by 16% (95% CI 9%–23%, p < 0.001 respectively in the follow-up. Fifteen (60% vendors reported refusing sell pesticides to a high-risk person (non-farmer or intoxicated person in the follow-up compared to three (12% at baseline. Vendors reported that they were aware from community feedback that they had prevented at least seven suicide attempts. On four identified occasions, vendors in urban shops had been unable to recognize the self-harming intention of customers who then ingested the pesticide. Only 2 (8% vendors were dissatisfied with the training and 23 (92% said they would recommend it to other vendors. Conclusions Our study suggests that vendor-based sales restriction in regions with high rates of self-poisoning has the potential to reduce access to pesticides for self-poisoning. A large-scale study of the effectiveness

  2. 2016 Accomplishments. Tritium aging studies on stainless steel. Forging process effects on the fracture toughness properties of tritium-precharged stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, Michael J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-01-01

    Forged austenitic stainless steels are used as the materials of construction for pressure vessels designed to contain tritium at high pressure. These steels are highly resistant to tritium-assisted fracture but their resistance can depend on the details of the forging microstructure. During FY16, the effects of forging strain rate and deformation temperature on the fracture toughness properties of tritium-exposed-and-aged Type 304L stainless steel were studied. Forgings were produced from a single heat of steel using four types of production forging equipment – hydraulic press, mechanical press, screw press, and high-energy-rate forging (HERF). Each machine imparted a different nominal strain rate during the deformation. The objective of the study was to characterize the J-Integral fracture toughness properties as a function of the industrial strain rate and temperature. The second objective was to measure the effects of tritium and decay helium on toughness. Tritium and decay helium effects were measured by thermally precharging the as-forged specimens with tritium gas at 34.5 MPa and 350°C and aging for up to five years at -80°C to build-in decay helium prior to testing. The results of this study show that the fracture toughness properties of the as-forged steels vary with forging strain rate and forging temperature. The effect is largely due to yield strength as the higher-strength forgings had the lower toughness values. For non-charged specimens, fracture toughness properties were improved by forging at 871°C versus 816°C and Screw-Press forgings tended to have lower fracture toughness values than the other forgings. Tritium exposures reduced the fracture toughness values remarkably to fracture toughness values averaging 10-20% of as-forged values. However, forging strain rate and temperature had little or no effect on the fracture toughness after tritium precharging and aging. The result was confirmed by fractography which indicated that fracture modes

  3. Hygiene practices among street food vendors

    African Journals Online (AJOL)

    User

    giene regulations to keep street food save for consumers. Journal of Medical ... UDS Publishers Limited All Right Reserved 2026-6294 ... authorities to enforce food safety regulations, unlike .... (50%) school food vendors sampled in Konongo.

  4. [A method of temperature measurement for hot forging with surface oxide based on infrared spectroscopy].

    Science.gov (United States)

    Zhang, Yu-cun; Qi, Yan-de; Fu, Xian-bin

    2012-05-01

    High temperature large forging is covered with a thick oxide during forging. It leads to a big measurement data error. In this paper, a method of measuring temperature based on infrared spectroscopy is presented. It can effectively eliminate the influence of surface oxide on the measurement of temperature. The method can measure the surface temperature and emissivity of the oxide directly using the infrared spectrum. The infrared spectrum is radiated from surface oxide of forging. Then it can derive the real temperature of hot forging covered with the oxide using the heat exchange equation. In order to greatly restrain interference spectroscopy through included in the received infrared radiation spectrum, three interference filter system was proposed, and a group of optimal gap parameter values using spectral simulation were obtained. The precision of temperature measurement was improved. The experimental results show that the method can accurately measure the surface temperature of high temperature forging covered with oxide. It meets the requirements of measurement accuracy, and the temperature measurement method is feasible according to the experiment result.

  5. Responsible vendors, intelligent consumers: Silk Road, the online revolution in drug trading.

    Science.gov (United States)

    Van Hout, Marie Claire; Bingham, Tim

    2014-03-01

    Silk Road is located on the Deep Web and provides an anonymous transacting infrastructure for the retail of drugs and pharmaceuticals. Members are attracted to the site due to protection of identity by screen pseudonyms, variety and quality of product listings, selection of vendors based on reviews, reduced personal risks, stealth of product delivery, development of personal connections with vendors in stealth modes and forum activity. The study aimed to explore vendor accounts of Silk Road as retail infrastructure. A single and holistic case study with embedded units approach (Yin, 2003) was chosen to explore the accounts of vendor subunits situated within the Silk Road marketplace. Vendors (n=10) completed an online interview via the direct message facility and via Tor mail. Vendors described themselves as 'intelligent and responsible' consumers of drugs. Decisions to commence vending operations on the site centred on simplicity in setting up vendor accounts, and opportunity to operate within a low risk, high traffic, high mark-up, secure and anonymous Deep Web infrastructure. The embedded online culture of harm reduction ethos appealed to them in terms of the responsible vending and use of personally tested high quality products. The professional approach to running their Silk Road businesses and dedication to providing a quality service was characterised by professional advertising of quality products, professional communication and visibility on forum pages, speedy dispatch of slightly overweight products, competitive pricing, good stealth techniques and efforts to avoid customer disputes. Vendors appeared content with a fairly constant buyer demand and described a relatively competitive market between small and big time market players. Concerns were evident with regard to Bitcoin instability. The greatest threat to Silk Road and other sites operating on the Deep Web is not law enforcement or market dynamics, it is technology itself. Copyright © 2013 Elsevier

  6. Transmission electron microscopy of Ti-12Mo-13Nb Alloy aged after heat forging

    International Nuclear Information System (INIS)

    Oliveira, Nathalia Rodrigues; Baldan, Renato; Gabriel, Sinara Borborema

    2014-01-01

    Metastable β-Ti alloys possess mechanical properties, in particular a elastic modulus that depends not only on its composition but also the applied thermomechanical treatments. These alloys require high mechanical strength and a low Young’s modulus to avoid stress shielding. Preliminary studies on the development of Ti- 13Nb-12Mo alloy showed than the better properties were obtained at aged at 500 ° C / 24 h after cold forging , whose microstructure consisted of bimodal α phase in the β matrix. In this work, Ti-12Mo-13Nb alloy was heat forged and aged at 500 deg C for 24h and the microstructure was analyzed by employing X-ray diffraction and transmission electron microscopy. According to the results, while the cold forging resulted in bimodal α phase in the β matrix, hot forging resulted in a fine and homogeneous α phase in the β matrix. (author)

  7. Modelling and Testing of Friction in Forging

    DEFF Research Database (Denmark)

    Bay, Niels

    2007-01-01

    Knowledge about friction is still limited in forging. The theoretical models applied presently for process analysis are not satisfactory compared to the advanced and detailed studies possible to carry out by plastic FEM analyses and more refined models have to be based on experimental testing...

  8. Forging Inclusive Solutions: Experiential Earth Charter Education

    Science.gov (United States)

    Hill, Linda D.

    2010-01-01

    Forging Inclusive Solutions describes the aims, methodology and outcomes of Inclusive Leadership Adventures, an experiential education curriculum for exploring the Earth Charter. Experiential education builds meaningful relationships, skills, awareness and an inclusive community based on the Earth Charter principles. When we meet people where they…

  9. Poverty alleviation from the perspective of street vendors in Lesoth ...

    African Journals Online (AJOL)

    The aim of this paper was to examine from the perspective of street vendors how they are fighting poverty and the extent of winning this endemic cankerworm. The findings of this paper are informed by a study carried in 2007 on poverty and street vendors in Lesotho. Questionnaires and focus group discussions were used ...

  10. Finite element analysis for temperature distributions in a cold forging

    International Nuclear Information System (INIS)

    Kim, Dong Bum; Lee, In Hwan; Cho, Hae Yong; Kim, Sung Wook; Song, In Chul; Jeon, Byung Cheol

    2013-01-01

    In this research, the finite element method is utilized to predict the temperature distributions in a cold-forging process for a cambolt. The cambolt is mainly used as a part of a suspension system of a vehicle. The cambolt has an off-centered lobe that manipulates the vertical position of the knuckle and wheel to a slight degree. The cambolt requires certain mechanical properties, such as strength and endurance limits. Moreover, temperature is also an important factor to realize mass production and improve efficiency. However, direct measurement of temperature in a forging process is infeasible with existing technology; therefore, there is a critical need for a new technique. Accordingly, in this study, a thermo-coupled finite element method is developed for predicting the temperature distribution. The rate of energy conversion to heat for the workpiece material is determined, and the temperature distribution is analyzed throughout the forging process for a cambolt. The temperatures associated with different punch speeds are also studied, as well as the relationships between load, temperature, and punch speed. Experimental verification of the technique is presented.

  11. Finite element analysis for temperature distributions in a cold forging

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dong Bum; Lee, In Hwan; Cho, Hae Yong [Chungbuk National University, Cheongju (Korea, Republic of); Kim, Sung Wook [Yanbian National University, Yanbian (China); Song, In Chul; Jeon, Byung Cheol [Sunil dyfas, Jincheon (Korea, Republic of)

    2013-10-15

    In this research, the finite element method is utilized to predict the temperature distributions in a cold-forging process for a cambolt. The cambolt is mainly used as a part of a suspension system of a vehicle. The cambolt has an off-centered lobe that manipulates the vertical position of the knuckle and wheel to a slight degree. The cambolt requires certain mechanical properties, such as strength and endurance limits. Moreover, temperature is also an important factor to realize mass production and improve efficiency. However, direct measurement of temperature in a forging process is infeasible with existing technology; therefore, there is a critical need for a new technique. Accordingly, in this study, a thermo-coupled finite element method is developed for predicting the temperature distribution. The rate of energy conversion to heat for the workpiece material is determined, and the temperature distribution is analyzed throughout the forging process for a cambolt. The temperatures associated with different punch speeds are also studied, as well as the relationships between load, temperature, and punch speed. Experimental verification of the technique is presented.

  12. A material based approach to creating wear resistant surfaces for hot forging

    Science.gov (United States)

    Babu, Sailesh

    Tools and dies used in metal forming are characterized by extremely high temperatures at the interface, high local pressures and large metal to metal sliding. These harsh conditions result in accelerated wear of tooling. Lubrication of tools, done to improve metal flow drastically quenches the surface layers of the tools and compounds the tool failure problem. This phenomenon becomes a serious issue when parts forged at complex and are expected to meet tight tolerances. Unpredictable and hence uncontrolled wear and degradation of tooling result in poor part quality and premature tool failure that result in high scrap, shop downtime, poor efficiency and high cost. The objective of this dissertation is to develop a computer-based methodology for analyzing the requirements hot forging tooling to resist wear and plastic deformation and wear and predicting life cycle of forge tooling. Development of such is a system is complicated by the fact that wear and degradation of tooling is influenced by not only the die material used but also numerous process controls like lubricant, dilution ratio, forging temperature, equipment used, tool geometries among others. Phenomenological models available u1 the literature give us a good thumb rule to selecting materials but do not provide a way to evaluate pits performance in field. Once a material is chosen, there are no proven approaches to create surfaces out of these materials. Coating approaches like PVD and CVD cannot generate thick coatings necessary to withstand the conditions under hot forging. Welding cannot generate complex surfaces without several secondary operations like heat treating and machining. If careful procedures are not followed, welds crack and seldom survive forging loads. There is a strong need for an approach to selectively, reliably and precisely deposit material of choice reliably on an existing surface which exhibit not only good tribological properties but also good adhesion to the substrate

  13. Y2K - an oil and gas software vendor's perspective

    International Nuclear Information System (INIS)

    Stewart, L.D.

    1998-01-01

    Oil and gas companies have begun to deal with third party software vendors to increase their efficiency and to concentrate on their core business. When it comes to dealing with year 2000 (Y2K) problems, information technology (IT) departments will have to deal with complex heterogeneous systems and long lists of independent software vendors and suppliers. This paper highlighted some of the unique issues that should be considered when testing any heterogeneous oil and gas system for Y2K. Most petroleum companies and vendors have established Y2K compliance teams with plans involving three major phases: (1) testing and identification of problems, (2) correction and avoidance of problems, and (3) preparation for recovery from unidentified problems

  14. Effect of raw materials and hardening process on hardness of manually forged knife

    Science.gov (United States)

    Balkhaya, Suwarno

    2017-06-01

    Knives are normally made by forging process either using a machine or traditional method by means of hammering process. This present work was conducted to study the effects of steel raw materials and hardening process on the hardness of manually forged knives. The knife samples were made by traditional hammering (forging) process done by local blacksmith. Afterward, the samples were heat treated with two different hardening procedures, the first was based on the blacksmith procedure and the second was systematically done at the laboratory. The forging was done in the temperature ranged between 900-950°C, while the final temperature ranged between 650-675°C. The results showed that knives made of spring steel and heat treated in simulated condition at the laboratory obtained higher level of hardness, i.e. 62 HRC. In general, knives heat treated by local blacksmith had lower level of hardness that those obtained from simulated condition. Therefore, we concluded that the traditional knife quality in term of hardness can be improved by optimizing the heat treatment schedule.

  15. Fabrication Improvement of Cold Forging Hexagonal Nuts by Computational Analysis and Experiment Verification

    Directory of Open Access Journals (Sweden)

    Shao-Yi Hsia

    2015-01-01

    Full Text Available Cold forging has played a critical role in fasteners and has been applied to the automobile industry, construction industry, aerospace industry, and living products so that cold forging presents the opportunities for manufacturing more products. By using computer simulation, this study attempts to analyze the process of creating machine parts, such as hexagonal nuts. The DEFORM-3D forming software is applied to analyze the process at various stages in the computer simulation, and the compression test is also used for the flow stress equation in order to compare the differences between the experimental results and the equation that is built into the computer simulation software. At the same time, the metallography and hardness of experiments are utilized to understand the cold forging characteristics of hexagonal nuts. The research results would benefit machinery businesses to realize the forging load and forming conditions at various stages before the fastener formation. In addition to planning proper die design and production, the quality of the produced hexagonal nuts would be more stable to promote industrial competitiveness.

  16. Common QA/QM Criteria for Multinational Vendor Inspection

    International Nuclear Information System (INIS)

    2014-01-01

    This VICWG document provides the 'Common QA/QM Criteria' which will be used in Multinational Vendor Inspection. The 'Common QA/QM Criteria' provides the basic consideration when performing the Vendor Inspection. These criteria has been developed in conformity with International Codes and Standards such as IAEA, ISO and so on that MDEP member countries adopted. The purpose of the VICWG is to establish areas of co-operation in the Vendor Inspection practices among MDEP member countries as described in the MDEP issue-specific Terms of Reference (ToR). As part of this, from the beginning, a survey was performed to understand and to identify areas of commonality and differences between regulatory practices of member countries in the area of vendor inspection. The VICWG also collaborated by performing Witnessed Inspections and Joint Inspections. Through these activities, it was recognized that member countries commonly apply the IAEA safety standard (GS-R-3) to the vendor inspection criteria, and almost ail European member countries apply the ISO standard (ISO9001). In the US, the NRC regulatory requirement in 10 CFR, Part 50, Appendix B is used. South Korea uses the same criteria as in the US. As a result of the information obtained, a comparison table between codes and standards (IAEAGS-R-3, ISO 9001:2008.10CFR50 Appendix Band ASME NQA-1) has been developed in order to inform the development of 'Common QA/QM Criteria'. The result is documented in Table 1, 'MDEP CORE QA/QM Requirement and Comparison between Codes and Standards'. In addition, each country's criteria were compared with the US 10CFR50 Appendix B as a template. Table 2 shows VICWG Survey on Quality Assurance Program Requirements. Through these activities above, we considered that the core requirements should be consistent with both IAEA safety standard and ISO standard, and considered that the common requirements in the US 10CFR50 Appendix B used to the survey

  17. Influence of the Constitutive Flow Law in FEM Simulation of the Radial Forging Process

    Directory of Open Access Journals (Sweden)

    Olivier Pantalé

    2013-01-01

    Full Text Available Radial forging is a widely used forming process for manufacturing hollow products in transport industry. As the deformation of the workpiece, during the process, is a consequence of a large number of high-speed strokes, the Johnson-Cook constitutive law (taking into account the strain rate seems to be well adapted for representing the material behavior even if the process is performed under cold conditions. But numerous contributions concerning radial forging analysis, in the literature, are based on a simple elastic-plastic formulation. As far as we know, this assumption has yet not been validated for the radial forging process. Because of the importance of the flow law in the effectiveness of the model, our purpose in this paper is to analyze the influence of the use of an elastic-viscoplastic formulation instead of an elastic-plastic one for modeling the cold radial forging process. In this paper we have selected two different laws for the simulations: the Johnson-Cook and the Ludwik ones, and we have compared the results in terms of forging force, product's thickness, strains, stresses, and CPU time. For the presented study we use an AISI 4140 steel, and we denote a fairly good agreement between the results obtained using both laws.

  18. 19 CFR 24.34 - Vouchers; vendors' bills of sale; invoices.

    Science.gov (United States)

    2010-04-01

    ... that the above bill is correct and just and that payment has not been received. Vouchers, vendors... employee, in which case the voucher may be in the name of the officer or employee who made the payment. (c... 19 Customs Duties 1 2010-04-01 2010-04-01 false Vouchers; vendors' bills of sale; invoices. 24.34...

  19. A framework for evaluating electronic health record vendor user-centered design and usability testing processes.

    Science.gov (United States)

    Ratwani, Raj M; Zachary Hettinger, A; Kosydar, Allison; Fairbanks, Rollin J; Hodgkins, Michael L

    2017-04-01

    Currently, there are few resources for electronic health record (EHR) purchasers and end users to understand the usability processes employed by EHR vendors during product design and development. We developed a framework, based on human factors literature and industry standards, to systematically evaluate the user-centered design processes and usability testing methods used by EHR vendors. We reviewed current usability certification requirements and the human factors literature to develop a 15-point framework for evaluating EHR products. The framework is based on 3 dimensions: user-centered design process, summative testing methodology, and summative testing results. Two vendor usability reports were retrieved from the Office of the National Coordinator's Certified Health IT Product List and were evaluated using the framework. One vendor scored low on the framework (5 pts) while the other vendor scored high on the framework (15 pts). The 2 scored vendor reports demonstrate the framework's ability to discriminate between the variabilities in vendor processes and to determine which vendors are meeting best practices. The framework provides a method to more easily comprehend EHR vendors' usability processes and serves to highlight where EHR vendors may be falling short in terms of best practices. The framework provides a greater level of transparency for both purchasers and end users of EHRs. The framework highlights the need for clearer certification requirements and suggests that the authorized certification bodies that examine vendor usability reports may need to be provided with clearer guidance. © The Author 2016. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com

  20. An Improved Unsupervised Modeling Methodology For Detecting Fraud In Vendor Payment Transactions

    National Research Council Canada - National Science Library

    Rouillard, Gregory

    2003-01-01

    ...) vendor payment transactions through Unsupervised Modeling (cluster analysis) . Clementine Data Mining software is used to construct unsupervised models of vendor payment data using the K-Means, Two Step, and Kohonen algorithms...

  1. Transportation Costs and Carbon Emissions in a Vendor Managed Inventory Situation

    DEFF Research Database (Denmark)

    Turkensteen, Marcel; Larsen, Christian

    2014-01-01

    Recently, there has been much focus on carbon emissions and fuel consumption from road transport. In this paper, we consider a vendor deciding on the degree to which deliveries to geographically dispersed retailers should be consolidated. The vendor can consolidate shipments over time and deliver...

  2. Tailorable Burning Behavior of Ti14 Alloy by Controlling Semi-Solid Forging Temperature.

    Science.gov (United States)

    Chen, Yongnan; Yang, Wenqing; Zhan, Haifei; Zhang, Fengying; Huo, Yazhou; Zhao, Yongqing; Song, Xuding; Gu, Yuantong

    2016-08-16

    Semi-solid processing (SSP) is a popular near-net-shape forming technology for metals, while its application is still limited in titanium alloy mainly due to its low formability. Recent works showed that SSP could effectively enhance the formability and mechanical properties of titanium alloys. The processing parameters such as temperature and forging rate/ratio, are directly correlated with the microstructure, which endow the alloy with different chemical and physical properties. Specifically, as a key structural material for the advanced aero-engine, the burn resistant performance is a crucial requirement for the burn resistant titanium alloy. Thus, this work aims to assess the burning behavior of Ti14, a kind of burn resistant alloy, as forged at different semi-solid forging temperatures. The burning characteristics of the alloy are analyzed by a series of burning tests with different burning durations, velocities, and microstructures of burned sample. The results showed that the burning process is highly dependent on the forging temperature, due to the fact that higher temperatures would result in more Ti₂Cu precipitate within grain and along grain boundaries. Such a microstructure hinders the transport of oxygen in the stable burning stage through the formation of a kind of oxygen isolation Cu-enriched layer under the burn product zone. This work suggests that the burning resistance of the alloy can be effectively tuned by controlling the temperature during the semi-solid forging process.

  3. On the domestically-made heavy forging for reactor pressure vessels of PWR nuclear power plant

    International Nuclear Information System (INIS)

    Pan Xiren; Zhang Chen.

    1988-01-01

    The present situation of the foreign heavy forgings for nuclear reactor pressure vessels and the heavy forgings condition which is used for the Qinshan 300MWe nuclear power plant are described. Some opinions of domestic products is proposed

  4. [The nutritional and dietary intake among community-dwelling elderly female users of mobile vendor vehicles].

    Science.gov (United States)

    Yoshimura, Yukio; Ito, Hideki; Yoshimura, Hidenori; Kamada, Chiemi; Okumura, Ryota; Shinno, Yuki; Suzuki, Taro; Horie, Kazumi; Takaya, Koji; Omi, Hideaki

    2018-01-01

    We compared the nutritional and dietary intakes of users of mobile vendor vehicles and users of stores to clarify the problems in the nutritional intake of users of mobile vendor vehicles. We conducted a questionnaire about the food accessibility among 257 elderly women (age: ≥65 years) who used mobile vendor vehicles and/or stores to shop. The nutritional intake was assessed using the 24-hour recall method. We used an analysis of covariance (ANCOVA) to calculate the age-adjusted mean values for the total nutritional intake. The nutritional intake among users of mobile vendor vehicles included significantly lower intakes of energy (168 kcal), green vegetables, other vegetables, and meats. Furthermore, those who only shopped at mobile vendor vehicles consumed less energy and fewer nutrients than those who shopped at places other than mobile vendor vehicles. The comparison of the shopping frequency and nutritional intake of the subjects who used mobile vendor vehicles alone revealed that the energy and protein intakes of those who shopped once per week was significantly lower in comparison to those who shopped twice per week. Users of mobile vendor vehicles had lower intakes of macronutrients and various minerals and vitamins. Among the food groups, intakes of vegetables, meat, and dairy products were low. These findings suggest that the lack of means of shopping other than mobile vendor vehicles and shopping once per week may be associated with an inadequate dietary intake among users of mobile vendor vehicles. It would be desirable to develop the shopping environment is desirable.

  5. THE FORMING OF MAGNESIUM ALLOY FORGINGS FOR AIRCRAFT AND AUTOMOTIVE APPLICATIONS

    Directory of Open Access Journals (Sweden)

    Anna Dziubińska

    2016-09-01

    Full Text Available The paper presents the theoretical and technological aspects of forming magnesium alloy parts for aircraft and automotive applications. The main applications of magnesium alloys in the aircraft and automotive industries are discussed. In addition, the forging technology for magnesium alloys is generally described, with a particular emphasis on wrought alloys. A brief outline of the state of the art in the forging of magnesium alloys is given based on a survey of the specialist literature and the results of previous research by the authors.

  6. Adapted diffusion processes for effective forging dies

    Science.gov (United States)

    Paschke, H.; Nienhaus, A.; Brunotte, K.; Petersen, T.; Siegmund, M.; Lippold, L.; Weber, M.; Mejauschek, M.; Landgraf, P.; Braeuer, G.; Behrens, B.-A.; Lampke, T.

    2018-05-01

    Hot forging is an effective production method producing safety relevant parts with excellent mechanical properties. The economic efficiency directly depends on the occurring wear of the tools, which limits service lifetime. Several approaches of the presenting research group aim at minimizing the wear caused by interacting mechanical and thermal loads by using enhanced nitriding technology. Thus, by modifying the surface zone layer it is possible to create a resistance against thermal softening provoking plastic deformation and pronounced abrasive wear. As a disadvantage, intensely nitrided surfaces may possibly include the risk of increased crack sensitivity and therefore feature the chipping of material at the treated surface. Recent projects (evaluated in several industrial applications) show the high technological potential of adapted treatments: A first approach evaluated localized treatments by preventing areas from nitrogen diffusion with applied pastes or other coverages. Now, further ideas are to use this principle to structure the surface with differently designed patterns generating smaller ductile zones beneath nitrided ones. The selection of suitable designs is subject to certain geo-metrical requirements though. The intention of this approach is to prevent the formation and propagation of cracks under thermal shock conditions. Analytical characterization methods for crack sensitivity of surface zone layers and an accurate system of testing rigs for thermal shock conditions verified the treatment concepts. Additionally, serial forging tests using adapted testing geometries and finally, tests in the industrial production field were performed. Besides stabilizing the service lifetime and decreasing specific wear mechanisms caused by thermal influences, the crack behavior was influenced positively. This leads to a higher efficiency of the industrial production process and enables higher output in forging campaigns of industrial partners.

  7. Manufacturing and material properties of forgings for reactor pressure vessel of high temperature engineering test reactor

    International Nuclear Information System (INIS)

    Sato, I.; Suzuki, K.

    1994-01-01

    For the reactor pressure vessel (RPV) of high temperature engineering test reactor (HTTR) which has been developed by Japan Atomic Energy Research Institute (JAERI), 2 1/4Cr-1Mo steel is used first in the world. Material confirmation test has been carried out to demonstrate good applicability of forged low Si 2 1/4Cr-1Mo steel to the RPV of HTTR. Recently, JSW has succeeded in the manufacturing of large size ring forgings and large size forged cover dome integrated with nozzles for stand pipe for the RPV. This paper describes the results of the material confirmation test as well as the manufacturing and material properties of the large forged cover dome integrated with nozzles for stand pipe. (orig.)

  8. Licensee contractor and vendor inspection status report. Quarterly progress report, April 1996--June 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    The federal government and nuclear industry have established a system for the inspection of commercial nuclear facilities to provide for multiple levels of inspection and verification. The Vendor Inspection System (VIS) of the Special Inspection Branch reviews and inspects the quality and suitability of vendor products, licensee-vendor interface, environmental qualification of equipment, and review of equipment problems found during operation and their corrective action. This report contains copies of all vendor inspection reports issued during the calendar year for which it is published.

  9. Licensee contractor and vendor inspection status report. Quarterly progress report, April 1996--June 1996

    International Nuclear Information System (INIS)

    1996-08-01

    The federal government and nuclear industry have established a system for the inspection of commercial nuclear facilities to provide for multiple levels of inspection and verification. The Vendor Inspection System (VIS) of the Special Inspection Branch reviews and inspects the quality and suitability of vendor products, licensee-vendor interface, environmental qualification of equipment, and review of equipment problems found during operation and their corrective action. This report contains copies of all vendor inspection reports issued during the calendar year for which it is published

  10. Pengurangan Bullwhip Effect dengan Metode Vendor Managed Inventory

    Directory of Open Access Journals (Sweden)

    Fenny Rubbayanti Dewi

    2016-04-01

    Full Text Available Information distortion caused PT Multi Sarana Indotani got higher demand than the distributor. Demand variability in each echelon of the supply chain (bullwhip effect may occur due to lack of demand stability that the producer had difficulty in determining the amount of production. One of the collaboration methods that can be applied to overcome the information distortion as causes of the bullwhip effect is vendor managed inventory, where the needs of distributor and retailers monitored and controlled by the producer. In this case, vendor managed inventory applied to two echelons, producer, and distributor.

  11. High-Temperature Oxidation Behavior and Kinetics of Forged 12Cr-MoVW Steel

    Directory of Open Access Journals (Sweden)

    Kim Yong Hwan

    2017-06-01

    Full Text Available The oxidation kinetics of forged 12Cr-MoVW steel was investigated in an air (N2+O2 atmosphere at 873-1073 K (Δ50 K using thermogravimetric analysis. The oxidized samples were characterized using X-ray diffraction, and the surface and cross-sectional morphologies were examined using scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy. The forged 12Cr-MoVW steel samples exhibited parabolic behavior and a low oxidation rate compared with their as-cast counterparts. A protective oxide layer was uniformly formed at relatively low temperature (≤973 K for the forged samples, which thus exhibited better oxidation resistance than the as-cast ones. These oxides are considered solid-solution compounds such as (Fe, Cr2O3.

  12. Forging a unique nursing partnership with China.

    Science.gov (United States)

    Munn, Flavia

    2017-07-12

    When members of a London nursing faculty forged a learning partnership with a Chinese counterpart they likely did not expect to be discussing the benefits of using Florence Nightingale lamps to decorate hospital walls. But there is nothing ordinary about the collaboration between King's College London and Nanjing Health School.

  13. Licensee Contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1992-01-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organization during the period from October through December 1991

  14. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1993-08-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organizations during the period from April through June 1993

  15. Licensee contractor and Vendor Inspection status report

    International Nuclear Information System (INIS)

    1992-05-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organizations during the period from January through March 1992

  16. Strategic Repositioning for Convection Business Case Study: AR Vendor

    OpenAIRE

    Anindita, Pratisara Satwika; Toha, Mohamad

    2013-01-01

    The study aims to determine suitable position and strategy in order to reach superiority in convection business based on the company strengths and weaknesses. A study conducted in late 2012 at AR Vendor, a home-based convection company which focus on the t-shirt screen printing service. In response to the issue of the below average profit margin, the company has to rethink their position and strategy in handling the convection business environment. While AR Vendor business may growth in accor...

  17. Modelling of Damage During Hot Forging of Ingots

    DEFF Research Database (Denmark)

    Christiansen, Peter; Hattel, Jesper Henri; Bay, Niels

    2013-01-01

    Ductile damage modelling in the ingot forging process is discussed. Advantages and disadvantages of both coupled and uncoupled ductile damage models are presented. Some uncoupled damage models are examined in greater detail regarding their applicability to different processes, where hydrostatic...

  18. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1991-05-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organization during the period from January 1991 through March 1991

  19. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1991-02-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organizations during the period from October 1990 through December 1990

  20. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1993-05-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organizations during the period from January 1993 through March 1993

  1. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1991-09-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organization during the period from April 1991 through June 1991

  2. Licensee contractor and Vendor Inspection status report

    International Nuclear Information System (INIS)

    1993-01-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organizations during the period from October 1992 through December 1992

  3. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1989-12-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organizations during the period from July 1989 through September 1989

  4. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1990-07-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organization during the period from January 1990 through March 1990

  5. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1990-01-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organizations during the period from October 1989 through December 1989

  6. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1992-11-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organization during the period from July 1992 through September 1992

  7. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1991-10-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organization during the period from July 1991 through September 1991

  8. Licensee contractor and vendor inspection status report

    International Nuclear Information System (INIS)

    1990-11-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organization during the period from April 1990 through June 1990

  9. Forged hollows (alloy 617) for PNP-hot gas collectors

    International Nuclear Information System (INIS)

    Hofmann, F.

    1984-01-01

    When the partners in the PNP-Project decided to manufacture components, such as gas collectors, from material of type alloy 617, the problem arose that required semi-fabricated products, especially forged hollows weighing several tons each, were not available. As VDM (Vereinigte Deutsche Metallwerke AG) had already experience in production of other semi-fabricated products of this alloy, attempts were made based on this knowledge, to develop manufacturing methods for forged hollows. The aim was to produce hollows as long as possible, and to keep the welding cost minimum. Welded seams are always critical during fabrication, as well as during later inspection under actual operating conditions. The three stage plan used to perform the above task illustrates the development aims is described

  10. Results of Aging Tests of Vendor-Produced Blended Feed Simulant

    International Nuclear Information System (INIS)

    Russell, Renee L.; Buchmiller, William C.; Cantrell, Kirk J.; Peterson, Reid A.; Rinehart, Donald E.

    2009-01-01

    The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is procuring through Pacific Northwest National Laboratory (PNNL) a minimum of five 3,500 gallon batches of waste simulant for Phase 1 testing in the Pretreatment Engineering Platform (PEP). To make sure that the quality of the simulant is acceptable, the production method was scaled up starting from laboratory-prepared simulant through 15-gallon vendor prepared simulant and 250-gallon vendor prepared simulant before embarking on the production of the 3500-gallon simulant batch by the vendor. The 3500-gallon PEP simulant batches were packaged in 250-gallon high molecular weight polyethylene totes at NOAH Technologies. The simulant was stored in an environmentally controlled environment at NOAH Technologies within their warehouse before blending or shipping. For the 15-gallon, 250-gallon, and 3500-gallon batch 0, the simulant was shipped in ambient temperature trucks with shipment requiring nominally 3 days. The 3500-gallon batch 1 traveled in a 70-75 F temperature controlled truck. Typically the simulant was uploaded in a PEP receiving tank within 24-hours of receipt. The first uploading required longer with it stored outside. Physical and chemical characterization of the 250-gallon batch was necessary to determine the effect of aging on the simulant in transit from the vendor and in storage before its use in the PEP. Therefore, aging tests were conducted on the 250-gallon batch of the vendor-produced PEP blended feed simulant to identify and determine any changes to the physical characteristics of the simulant when in storage. The supernate was also chemically characterized. Four aging scenarios for the vendor-produced blended simulant were studied: (1) stored outside in a 250-gallon tote, (2) stored inside in a gallon plastic bottle, (3) stored inside in a well mixed 5-L tank, and (4) subject to extended temperature cycling under summer temperature conditions in a gallon plastic bottle. The following

  11. An intutionistic fuzzy optimization approach to vendor selection problem

    Directory of Open Access Journals (Sweden)

    Prabjot Kaur

    2016-09-01

    Full Text Available Selecting the right vendor is an important business decision made by any organization. The decision involves multiple criteria and if the objectives vary in preference and scope, then nature of decision becomes multiobjective. In this paper, a vendor selection problem has been formulated as an intutionistic fuzzy multiobjective optimization where appropriate number of vendors is to be selected and order allocated to them. The multiobjective problem includes three objectives: minimizing the net price, maximizing the quality, and maximizing the on time deliveries subject to supplier's constraints. The objection function and the demand are treated as intutionistic fuzzy sets. An intutionistic fuzzy set has its ability to handle uncertainty with additional degrees of freedom. The Intutionistic fuzzy optimization (IFO problem is converted into a crisp linear form and solved using optimization software Tora. The advantage of IFO is that they give better results than fuzzy/crisp optimization. The proposed approach is explained by a numerical example.

  12. Comparison of advanced reactors program of different international vendors

    International Nuclear Information System (INIS)

    Agnihotri, N.K.

    2001-01-01

    The full text follows. Proposal for presenting a paper on Advanced Reactor Program Given below is the abstract for Track 6 session on Advanced Reactor at the ninth International Conference on Nuclear Engineering being held in Nice, France from April 8. through 12. 2001. This paper will provide an update on Advanced Reactor Program of different vendors in the United States, Japan, and Europe. Specifically the paper will look at the history of different Advanced Reactor Programs, international experience, aspect of economy due to standardization, and the highlights of technical specifications. The paper will also review aspects of Economy due to standardization, public acceptance, required construction time, and the experience of different vendors. The objective of the presentation is to underscore the highlights of the Reactor Program of different vendors in order to keep the attendees of the conference up-to-date. The presentation will be an impartial overview from an outsider's (not part of the Nuclear Steam Supply System's staff). (author)

  13. Production of a 304 stainless steel nuclear reactor forging from a very large electroslag refined ingot

    International Nuclear Information System (INIS)

    Watkins, E.J.; Tihansky, E.L.

    1986-01-01

    A four-loop, upper barrel flange forging for a nuclear reactor was produced from what the authors believe to be the largest 304H grade stainless steel electroslag refined (ESR) ingot ever refined. The ingot was refined in a 1524-mm-diameter, ingot withdrawal-type ESR furnace using a lime-bearing slag, low-frequency a-c power, and dry air protection. Five electrodes were remelted in order to produce the desired ingot weight. The ingot was subsequently forged in a five-step operation on a 6800-metric-ton press to produce the desired barrel flange configuration. Testing of the finished machined forging revealed excellent tensile ductility, excellent ultrasonic penetrability, and good chemical uniformity with no macrosegregation. Overall quality was judged to be superior to previously produced, conventionally melted forgings

  14. Forging Oxide-Dispersion-Strengthened Superalloys

    Science.gov (United States)

    Harf, F. H.; Glasgow, T. K.; Moracz, D. J.; Austin, C. M.

    1986-01-01

    Cladding of mild steel prevents surface cracking when alloy contacts die. Continual need for improvements in properties of alloys capable of withstanding elevated temperatures. Accomplished by using oxide-dispersion-strengthed superalloys such as Inconel Alloy MA 6000. Elevated tensile properties of forged alloy equal those of hot-rolled MA 6000 bar. Stress-rupture properties somewhat lower than those of bar stock but, at 1,100 degrees C, exceed those of strongest commercial single crystal, directionally solidified and conventionally cast superalloys.

  15. Dynamics of vendor innovation capability: Evidence from the Electronics Manufacturing Services industry

    DEFF Research Database (Denmark)

    Perunovic, Zoran; Mefford, Robert; Christoffersen, Mads

    2012-01-01

    and innovation. The first is the realization that vendor capabilities have been recognized as one of the most important factors for the success of outsourcing. The second refers to the fact that, even though innovation capability is required, vendors are still being selected, and their performance evaluated......, by traditional manufacturing capabilities, such as cost, quality, delivery, and flexibility. Taking a vendor’s perspective in outsourcing, we develop and present a conceptual framework for studying vendor innovation capability. We propose to test this framework in the Electronic Manufacturing Services Industry....

  16. Highlight: Forging the new Indonesia-Canada partnership | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    15 avr. 2016 ... Canada's Centre for International Governance Innovation and Indonesia's Centre for Strategic and International Studies organized the Indonesia-Canada Bilateral Forum, Innovation and Change: Forging the New Indonesia-Canada Partnership. IDRC co-sponsored the meeting, held May 26-27, 2015.

  17. Manufacturing involving forging of multiple objects in contact

    DEFF Research Database (Denmark)

    Nielsen, Chris Valentin; Zhang, W.; Martins, P.A.F.

    and dissimilar materials. While being plastically deformed against each other under increasing forging load, the parts dynamically develop their mutual contact interfaces. Comparisons of the final geometry as well as force-displacement curves are evaluated. The potential of simulated applications are discussed...

  18. Respiratory symptoms of vendors in an open-air hawker center in brunei darussalam.

    Science.gov (United States)

    Nazurah Bt Abdul Wahid, Nurul Nor; Balalla, N B P; Koh, David

    2014-01-01

    We studied respiratory problems among vendors exposed to cooking fumes in an open-air hawker center. Exposure to cooking fumes from either the use of fossil fuels or liquefied petroleum gas (LPG) has been shown to be associated with adverse respiratory health effects. We conducted a cross-sectional study among 67 food vendors exposed to cooking fumes as well as 18 merchandise sellers at an open-air hawker center in Brunei Darussalam. Past medical and smoking history and exposure to cooking fumes were obtained. The validated American Thoracic Society Questionnaire with a translated Malay version was used to ask for respiratory symptoms. Compared to merchandise sellers (n = 18), cooking vendors (n = 67) had a higher self-reported respiratory symptoms (50.7% for those cooking and 33.3% for merchandise sellers). Cough (28.3%) was the main respiratory symptom experienced in cooking vendors and breathlessness (22.2%) among merchandise sellers. Half (50.0%) of cooking vendors who worked for more than 10 years had cough and 27.3% had phlegm. Those cooking with charcoal were two times more likely to have cough than those cooking with LPG. Cooking vendors with a job duration of more than 10 years were thrice more likely to have cough. Cooking vendors in the open-air hawker center exposed to cooking fumes had more respiratory symptoms compared to non-exposed merchandise sellers. The type of fuel used for cooking and duration of work was associated with increased prevalence of cough.

  19. Phased array inspection of large size forged steel parts

    Science.gov (United States)

    Dupont-Marillia, Frederic; Jahazi, Mohammad; Belanger, Pierre

    2018-04-01

    High strength forged steel requires uncompromising quality to warrant advance performance for numerous critical applications. Ultrasonic inspection is commonly used in nondestructive testing to detect cracks and other defects. In steel blocks of relatively small dimensions (at least two directions not exceeding a few centimetres), phased array inspection is a trusted method to generate images of the inside of the blocks and therefore identify and size defects. However, casting of large size forged ingots introduces changes of mechanical parameters such as grain size, the Young's modulus, the Poisson's ratio, and the chemical composition. These heterogeneities affect the wave propagation, and consequently, the reliability of ultrasonic inspection and the imaging capabilities for these blocks. In this context, a custom phased array transducer designed for a 40-ton bainitic forged ingot was investigated. Following a previous study that provided local mechanical parameters for a similar block, two-dimensional simulations were made to compute the optimal transducer parameters including the pitch, width and number of elements. It appeared that depending on the number of elements, backwall reconstruction can generate high amplitude artefacts. Indeed, the large dimensions of the simulated block introduce numerous constructive interferences from backwall reflections which may lead to important artefacts. To increase image quality, the reconstruction algorithm was adapted and promising results were observed and compared with the scattering cone filter method available in the CIVA software.

  20. Friction and wear in hot forging of steels

    International Nuclear Information System (INIS)

    Daouben, E.; Dubar, L.; Dubar, M.; Deltombe, R.; Dubois, A.; Truong-Dinh, N.; Lazzarotto, L.

    2007-01-01

    In the field of hot forging of steels, the mastering of wear phenomena enables to save cost production, especially concerning tools. Surfaces of tools are protected thanks to graphite. The existing lubrication processes are not very well known: amount and quality of lubricant, lubrication techniques have to be strongly optimized to delay wear phenomena occurrence. This optimization is linked with hot forging processes, the lubricant layers must be tested according to representative friction conditions. This paper presents the first part of a global study focused on wear phenomena encountered in hot forging of steels. The goal is the identification of reliable parameters, in order to bring knowledge and models of wear. A prototype testing stand developed in the authors' laboratory is involved in this experimental analysis. This test is called Warm and Hot Upsetting Sliding Test (WHUST). The stand is composed of a heating induction system and a servo-hydraulic system. Workpieces taken from production can be heated until 1200 deg. C. A nitrided contactor representing the tool is heated at 200 deg. C. The contactor is then coated with graphite and rubs against the workpiece, leaving a residual track on it. Friction coefficient and surface parameters on the contactor and the workpiece are the most representative test results. The surface parameters are mainly the sliding length before defects occurrence, and the amplitude of surface profile of the contactor. The developed methodology will be first presented followed by the different parts of the experimental prototype. The results of experiment show clearly different levels of performance according to different lubricants

  1. Superplastic forging nitride ceramics

    Science.gov (United States)

    Panda, P.C.; Seydel, E.R.; Raj, R.

    1988-03-22

    A process is disclosed for preparing silicon nitride ceramic parts which are relatively flaw free and which need little or no machining, said process comprising the steps of: (a) preparing a starting powder by wet or dry mixing ingredients comprising by weight from about 70% to about 99% silicon nitride, from about 1% to about 30% of liquid phase forming additive and from 1% to about 7% free silicon; (b) cold pressing to obtain a preform of green density ranging from about 30% to about 75% of theoretical density; (c) sintering at atmospheric pressure in a nitrogen atmosphere at a temperature ranging from about 1,400 C to about 2,200 C to obtain a density which ranges from about 50% to about 100% of theoretical density and which is higher than said preform green density, and (d) press forging workpiece resulting from step (c) by isothermally uniaxially pressing said workpiece in an open die without initial contact between said workpiece and die wall perpendicular to the direction of pressing and so that pressed workpiece does not contact die wall perpendicular to the direction of pressing, to substantially final shape in a nitrogen atmosphere utilizing a temperature within the range of from about 1,400 C to essentially 1,750 C and strain rate within the range of about 10[sup [minus]7] to about 10[sup [minus]1] seconds[sup [minus]1], the temperature and strain rate being such that surface cracks do not occur, said pressing being carried out to obtain a shear deformation greater than 30% whereby superplastic forging is effected.

  2. 11 CFR 100.138 - Sale of food and beverages by vendor.

    Science.gov (United States)

    2010-01-01

    ... 11 Federal Elections 1 2010-01-01 2010-01-01 false Sale of food and beverages by vendor. 100.138...) Exceptions to Expenditures § 100.138 Sale of food and beverages by vendor. The sale of any food or beverage..., is not an expenditure, provided that the charge is at least equal to the cost of such food or...

  3. Production of A356 aluminum alloy wheels by thixo-forging combined with a low superheat casting process

    Directory of Open Access Journals (Sweden)

    Wang Shuncheng

    2013-09-01

    Full Text Available The A356 aluminum alloy wheels were produced by thixo-forging combined with a low superheat casting process. The as-cast microstructure, microstructure evolution during reheating and the mechanical properties of thixo-forged wheels made from the A356 aluminum alloy were studied. The results show that the A356 aluminum alloy round billet with fine, uniform and non-dendritic grains can be obtained when the melt is cast at 635 篊. When the round billet is reheated at 600 篊 for 60 min, the non-dendritic grains are changed into spherical ones and the round billet can be easily thixo-forged into wheels. The tensile strength, yield strength and elongation of the thixo-forged wheels with T6 heat treatment are 327.6 MPa, 228.3 MPa and 7.8%, respectively, which are higher than those of a cast wheel. It is suggested that the thixo-forging combined with the low superheat casting process is an effective technique to produce aluminum alloy wheels with high mechanical properties.

  4. strength and ductility of forged 1200 aluminum alloy reinforced

    African Journals Online (AJOL)

    eobe

    duced cylindrical shape samples, which were homogenized at 420 ... and properties of deformed materials depend on other factors ... after the surfaces were ground with emery paper of ... Figure 2: Maximum elongation of forged and annealed.

  5. Current steel forgings and their properties for steam generator of nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Sasaki, Tomoharu; Murai, Etsuo; Sato, Ikuo [Japan Steel Works Ltd., Muroran, Hokkaido (Japan). Muroran Plant; Suzuki, Kimiaki; Kusuhashi, Mikio; Tsukada, Hisashi [Japan Steel Works Ltd., Tokyo (Japan)

    2001-06-01

    On the steel forging (SF) elements for steam generator (SG) of the pressurized water type light water reactor (PWR), from a viewpoint of upgrading in their improvements of design and materials, here were described on three materials such as integrated steel forgings, high strength steel forgings, and vacuum carbon deoxidisation (VCD) steel forgings. On production of SG, by using the integrated SF, not only structural soundness of SG is upgraded, but also inspections containing inspections under production and usage become easier, to bring minimization of maintenance inspection and reduction of exposure under operation. And, in order to reduce weight of SG and upgrade seismic resistance, SA508, a Cl.3a high strength SF (620 MPa class in tensile strength) is used for some nuclear plants. Here were introduced material properties of this SF and described its chemical components and heat treatment condition. And, as a method to reduce macro- and micro-segregation of materials and to upgrade homogeneity of material property, a method combined deoxidisation of steel due to carbon monoxide reaction with crystal grain minimization due to addition of aluminum was investigated. In addition, properties of a low Si-SA508 Cl.3 steel using this method was compared with that of usual SA508 Cl.3 steel. (G.K.)

  6. Qualitative Research of AZ31 Magnesium Alloy Aircraft Brackets Produced by a New Forging Method

    Directory of Open Access Journals (Sweden)

    Dziubińska A.

    2016-06-01

    Full Text Available The paper reports a selection of numerical and experimental results of a new closed-die forging method for producing AZ31 magnesium alloy aircraft brackets with one rib. The numerical modelling of the new forming process was performed by the finite element method.The distributions of stresses, strains, temperature and forces were examined. The numerical results confirmed that the forgings produced by the new forming method are correct. For this reason, the new forming process was verified experimentally. The experimental results showed good agreement with the numerical results. The produced forgings of AZ31 magnesium alloy aircraft brackets with one rib were then subjected to qualitative tests.

  7. Evaluation of intergranular corrosion rate and microstructure of forged 316L round bar

    International Nuclear Information System (INIS)

    Lim, H. K.; Kim, Y. S.

    2009-01-01

    When austenitic stainless steels are heat treated in the range of 500∼850 .deg. C, the alloys are sensitized due to the formation of chromium carbide at grain boundaries and then intergranular corrosion occurs. This paper aims to evaluate the intergranular corrosion rate and microstructural change of forged 316L stainless steel. To analyze the microstructure by forging conditions, ferrite phase, sigma phase, intergranular precipitation were observed. In order to evaluate the intergranular corrosion rate. Huey test was performed by ASTM A262. On the base of microstructural observation, ferrite and sigma phases were not detected, and also intergranular precipitation was not revealed in optical microscopic observation. By ASTM A262 Practice A, step structure was shown in all forging conditions. Intergranular corrosion rate gradually increased by Huey test periods but average corrosion rate was under 0.03 mm/month

  8. Evaluation of intergranular corrosion rate and microstructure of forged 316L round bar

    Energy Technology Data Exchange (ETDEWEB)

    Lim, H. K.; Kim, Y. S. [Andong National University, Andong (Korea, Republic of)

    2009-12-15

    When austenitic stainless steels are heat treated in the range of 500{approx}850 .deg. C, the alloys are sensitized due to the formation of chromium carbide at grain boundaries and then intergranular corrosion occurs. This paper aims to evaluate the intergranular corrosion rate and microstructural change of forged 316L stainless steel. To analyze the microstructure by forging conditions, ferrite phase, sigma phase, intergranular precipitation were observed. In order to evaluate the intergranular corrosion rate. Huey test was performed by ASTM A262. On the base of microstructural observation, ferrite and sigma phases were not detected, and also intergranular precipitation was not revealed in optical microscopic observation. By ASTM A262 Practice A, step structure was shown in all forging conditions. Intergranular corrosion rate gradually increased by Huey test periods but average corrosion rate was under 0.03 mm/month.

  9. Numerical simulation of the dynamic recrystallization behaviour in hot precision forging helical gears

    Directory of Open Access Journals (Sweden)

    Feng Wei

    2015-01-01

    Full Text Available In hot precision forging helical gears, the dynamic recrystallization phenomena will occur, which affect the microstructure of the formed part and in turn decide their mechanical properties. To investigate the effect of deformation temperature on the dynamic recrystallization in hot precision forging helical gears, a three dimensional (3D finite element (FE model was created by coupling the thermo-mechanical model with the microstructure evolution model developed based on the hot compressive experimental data of 20CrMnTiH steel. The hot precision forging process was simulated and the effect laws of the deformation temperature on the microstructure evolution the formed part were investigated. The results show that the dynamic recrystallization volume fraction and the average grain sizes increased with the increasing deformation temperature and the higher deformation temperature is beneficial to dynamic recrystallization and grain refinement.

  10. The effects of composition and thermal path on hot ductility of forging steels

    Science.gov (United States)

    Connolly, Brendan M.

    This work examines the effects of composition and thermal path on the hot ductility of several forging steels with varied aluminum and nitrogen content. The primary mechanisms and controlling factors related to hot ductility are identified with a focus on the role of precipitates and segregation. The unique thermal paths and solidification structures of large cross-section forging ingots are discussed. Hot ductility testing is performed in a manner that approximates industrial conditions experienced by large cross-section forging ingots. A computer model for precipitation of aluminum nitride and vanadium nitride in austenite is presented. Industrial material is examined for comparison to experimental findings. It is found that increased aluminum and nitrogen content coarsens the as-solidified structure. The combined effects of microsegregation and uphill diffusion during deformation allow for carbide precipitation at prior austenite grain boundaries which reduces the hot ductility.

  11. Numerical simulation and experimental verification of microstructure evolution in large forged pipe used for AP1000 nuclear power plants

    International Nuclear Information System (INIS)

    Wang, Shenglong; Yang, Bin; Zhang, Mingxian; Wu, Huanchun; Peng, Jintao; Gao, Yang

    2016-01-01

    Highlights: • Establish systematically the database of 316LN stainless steel for Deform-3D. • Simulate the microstructure evolution during forging of AP1000 primary coolant pipe. • Carry out full-scale forging experiment for verification in engineering practice. • Get desirable grain size in simulation and experiment. • The variation trends of grain sizes in simulation and experiment are consistent. - Abstract: AP1000 primary coolant pipe is a large special-shaped forged pipe made of 316LN stainless steel. Due to the non-uniform temperature and deformation during its forging, coarse and fine grains usually coexist in the forged pipe, resulting in the heterogeneous microstructure and anisotropic performance. To investigate the microstructure evolution during the entire forging process, in the present research, the database of the 316LN stainless steel was established and a numerical simulation was performed. The results indicate that the middle body section of the forged pipe has an extremely uniform average grain size with the value smaller than 30 μm. The grain sizes in the ends of body sections were ranged from 30 μm to 60 μm. Boss sections have relatively homogeneous microstructure with the average grain size 30 μm to 44 μm. Furthermore, a full-scale hot forging was carried out for verification. Comparison of theoretical and experimental results showed good agreement and hence demonstrated the capabilities of the numerical simulation presented here. It is noteworthy that all grains in the workpiece were confirmed less than 180 μm, which meets the designer’s demands.

  12. MDEP Protocol VICWG-01. MDEP Protocol: Witnessed, Joint, and Multinational Vendor Inspection Protocol

    International Nuclear Information System (INIS)

    2014-01-01

    The Multinational Design Evaluation Programme (MDEP) was launched in 2006 by the US Nuclear Regulatory Commission (NRC) and the French Nuclear Safety Authority (ASN) with the aim of developing innovative approaches to leverage the resources and knowledge of national regulatory authorities reviewing new reactor designs. MDEP full members are regulators from Canada, People's Republic of China, Finland, France, India, Japan, Republic of Korea, Russian Federation, South Africa, Sweden, the United Kingdom and the United States of America. The United Arab Emirates and Turkey are associate members. The OECD Nuclear Energy Agency (NEA) acts as the Technical Secretariat for the MDEP. The International Atomic Energy Agency (IAEA) participates in many of the MDEP activities, including harmonisation efforts. The Vendor Inspection Cooperation Working Group (VICWG) is one of the issue-specific working groups that the MDEP members are undertaking with one long term goal of the VICWG being to maximize the use of the results obtained from other regulator's efforts in inspecting vendors. To accomplish this goal, it is vital that the regulators learn about each other's procedures, processes, and regulations. To facilitate the learning process the VICWG is coordinating vendor inspections among the involved regulatory authorities with the purpose of enhancing the understanding of each other's vendor inspection procedures. This programme is administered by the NEA. Involvement in specific inspections provides a number of opportunities for member state regulators to witness other regulators' inspection methods, gain useful information on the quality systems and manufacturing arrangements of specific vendors and where appropriate, actively participate in the inspection. The purpose of this protocol is to provide guidance to regulators that wish to carry out vendor inspections or participate in or witness other regulators' vendor inspections. It also provides

  13. EXAMINING FACTORS IN FLUENCING CUSTOMER SATISFACTION AND TRUST TOWARDS VENDORS ON THE MOBILE INTERNET

    OpenAIRE

    Norazah Mohd Suki

    2012-01-01

    This study aims to examine factors influencing customer satisfaction and trust towards vendors on the mobile Internet. Data were analysed among 200 respondents who completed the questionnaire by employing multiple regression analysis. Results revealed that customer satisfaction towards the vendor was significantly influenced by ease-of-use, responsiveness, and brand image. Meanwhile, customer trust towards the vendor in m-commerce is affected by responsiveness, brand image and...

  14. Ultrasonic phased arrays for nondestructive inspection of forgings

    International Nuclear Information System (INIS)

    Wuestenberg, H.; Rotter, B.; Klanke, H.P.; Harbecke, D.

    1993-01-01

    Ultrasonic examinations on large forgings like rotor shafts for turbines or components for nuclear reactors are carried out at various manufacturing stages and during in-service inspections. During the manufacture, most of the inspections are carried out manually. Special in-service conditions, such as those at nuclear pressure vessels, have resulted in the development of mechanized scanning equipment. Ultrasonic probes have improved, and well-adapted sound fields and pulse shapes and based on special imaging procedures for the representation of the reportable reflectors have been applied. Since the geometry of many forgings requires the use of a multitude of angles for the inspections in-service and during manufacture, phased-array probes can be used successfully. The main advantages of the phased-array concept, e.g. the generation of a multitude of angles with the typical increase of redundancy in detection and quantitative evaluation and the possibility to produce pictures of defect situations, will be described in this contribution

  15. ALLOCATING VENDOR RISKS IN THE HANFORD WASTE CLEANUP

    International Nuclear Information System (INIS)

    Keisler, Jeff M.; Buehring, William A.; McLaughlin, Peter D.; Robershotte, Mark A.; Whitfield, Ronald G.

    2004-01-01

    Organizations may view outsourcing as a way to eliminate risk. This application uses a decision analytic approach to determine which risks can be shared or shifted to vendors and which ones should be borne by the buyer. In this case, we found that allocating risks incorrectly could increase costs dramatically. This approach was used to develop the Request for Proposals (RFP) for the U.S. Department of Energy's (DOE's) privatization initiative for the Hanford Tank Waste Remediation System (TWRS). We describe this application and/SUMmarize technical and organizational lessons learned in the years following. The model used an assessment protocol to predict how vendors would react to proposed risk allocations in terms of their actions and their pricing

  16. Building Relationships between Small Manufacturing Enterprises and Vendors: Findings from the TIDE Program

    National Research Council Canada - National Science Library

    Estrin, Len; Foreman, John

    2003-01-01

    .... Additionally, vendors and value-added resellers (VARs) are reluctant to target this market. For vendor/VAR-SME relationships to succeed, both parties must redefine many of the roles and rules that guide the sales process...

  17. Geologic setting of the proposed Fallon FORGE Site, Nevada: Suitability for EGS research and development

    Science.gov (United States)

    Faulds, James E.; Blankenship, Douglas; Hinz, Nicholas H.; Sabin, Andrew; Nordquist, Josh; Hickman, Stephen H.; Glen, Jonathan; Kennedy, Mack; Siler, Drew; Robinson-Tait, Ann; Williams, Colin F.; Drakos, Peter; Calvin, Wendy M.

    2015-01-01

    The proposed Fallon FORGE site lies within and adjacent to the Naval Air Station Fallon (NASF) directly southeast of the town of Fallon, Nevada, within the large basin of the Carson Sink in west-central Nevada. The site is located on two parcels that include land owned by the NASF and leased and owned by Ormat Nevada, Inc. The Carson Sink in the vicinity of the Fallon site is covered by Quaternary deposits, including alluvial fan, eolian, and lacustrine sediments. Four wells penetrate the entire Neogene section and bottom in Mesozoic basement. Late Miocene to Quaternary basin-fill sediments are 0.5 to >1 km thick and overlie Oligocene-Miocene volcanic and lesser sedimentary rocks. The volcanic section is 0.5 to 1.0 km thick and dominated by Miocene mafic lavas. The Neogene section rests nonconformably on heterogeneous Mesozoic basement, which consists of Triassic-Jurassic metamorphic rocks intruded by Cretaceous granitic plutons. The structural framework is dominated by a gently west-tilted half graben cut by moderately to steeply dipping N- to NNEstriking normal faults that dip both east and west. Quaternary faults have not been observed within the proposed FORGE site. Fallon was selected for a potential FORGE site due to its extensional tectonic setting, abundance of available data, existing infrastructure, and documented temperatures, permeability, and lithologic composition of potential reservoirs that fall within the ranges specified by DOE for FORGE. Since the early 1970s, more than 45 wells have been drilled for geothermal exploration within the area. Four exploration wells within the FORGE site are available for use in the project. Several additional wells are available for monitoring outside the central FORGE site within the NASF and Ormat lease area, including numerous temperature gradient holes. There is an existing, ten-station micro-seismic earthquake (MEQ) array that has been collecting data since 2001; the MEQ array can be expanded to encompass the

  18. Numerical modeling of axi-symmetrical cold forging process by ``Pseudo Inverse Approach''

    Science.gov (United States)

    Halouani, A.; Li, Y. M.; Abbes, B.; Guo, Y. Q.

    2011-05-01

    The incremental approach is widely used for the forging process modeling, it gives good strain and stress estimation, but it is time consuming. A fast Inverse Approach (IA) has been developed for the axi-symmetric cold forging modeling [1-2]. This approach exploits maximum the knowledge of the final part's shape and the assumptions of proportional loading and simplified tool actions make the IA simulation very fast. The IA is proved very useful for the tool design and optimization because of its rapidity and good strain estimation. However, the assumptions mentioned above cannot provide good stress estimation because of neglecting the loading history. A new approach called "Pseudo Inverse Approach" (PIA) was proposed by Batoz, Guo et al.. [3] for the sheet forming modeling, which keeps the IA's advantages but gives good stress estimation by taking into consideration the loading history. Our aim is to adapt the PIA for the cold forging modeling in this paper. The main developments in PIA are resumed as follows: A few intermediate configurations are generated for the given tools' positions to consider the deformation history; the strain increment is calculated by the inverse method between the previous and actual configurations. An incremental algorithm of the plastic integration is used in PIA instead of the total constitutive law used in the IA. An example is used to show the effectiveness and limitations of the PIA for the cold forging process modeling.

  19. Dissolution of FFTF vendor fuel

    International Nuclear Information System (INIS)

    Lerch, R.E.

    1979-08-01

    Dissolution experiments were performed on FFTF vendor fuel (both mechanically mixed and coprecipitated) during 1974, 1975, and 1976. A marked improvement was noted in the completeness of fuel dissolution from 1974 to 1976. The reason for this is unknown but may have been attributable to slight changes in fuel fabrication conditions. In general, the bulk of the fuel pellets tested dissolved to greater than 99.9% in nitric acid alone

  20. Dissolution of FFTF vendor fuel

    Energy Technology Data Exchange (ETDEWEB)

    Lerch, R.E.

    1979-08-01

    Dissolution experiments were performed on FFTF vendor fuel (both mechanically mixed and coprecipitated) during 1974, 1975, and 1976. A marked improvement was noted in the completeness of fuel dissolution from 1974 to 1976. The reason for this is unknown but may have been attributable to slight changes in fuel fabrication conditions. In general, the bulk of the fuel pellets tested dissolved to greater than 99.9% in nitric acid alone.

  1. Stainless steel forgings for nuclear chemical plants

    International Nuclear Information System (INIS)

    1982-02-01

    This Specification covers detailed requirements for the supply of austenitic stainless steel forgings used in radioactive and corrosive areas within the Nuclear Industry. With the exception of 316S51 the materials specified are all suitable for contact with nitric acid, 316S51 being included as suitable for use in contact with sodium and other alkali metals at elevated temperatures. (author)

  2. The Investigations of Friction under Die Surface Vibration in Cold Forging Process

    DEFF Research Database (Denmark)

    Jinming, Sha

    investigation, and the second stage is to design and manufacture a more practical tool system which can be used to forging some industrial components with larger capacity. The high performance and power piezoelectric actuator stack as the vibration source will be used for designing the vibration system in order...... to 50% with vibration being applied in forming process. Furthermore, by using finite element method, a series of the simulations of the cold forging process under die surface excitation have been implemented in order to further understand the influence of vibration on friction, especially the influence...

  3. Hanford Tank Farm Vapors Abatement Technology and Vendor Proposals Assessment

    International Nuclear Information System (INIS)

    Burns, H. H.; Farrar, M. E.; Fink, S. D.

    2016-01-01

    Suspected chemical vapor releases from the Hanford nuclear waste tank system pose concerns for worker exposure. Washington River Protection Solutions (WRPS) contracted the Savannah River National Laboratory (SRNL) to explore abatement technologies and strategies to remediate the vapors emitted through the ventilation system. In response, SRNL conducted an evaluation of technologies to abate, or reduce, vapor emissions to below 10% of the recognized occupational exposure limits (OELs). The evaluation included a review of published literature and a broadly communicated Request for Information to commercial vendors through a Federal Business Opportunities (Fed Biz Opps) web posting. In addition, SRNL conducted a workshop and post-workshop conference calls with interested suppliers (vendors) to assess proposals of relevant technologies. This report reviews applicable technologies and summarizes the approaches proposed by the vendors who participated in the workshop and teleconference interviews. In addition, the report evaluates the estimated performance of the individual technologies for the various classes of chemical compounds present in the Hanford Chemicals of Potential Concern (COPCs) list. Similarly, the report provides a relative evaluation of the vendor proposed approaches against criteria of: technical feasibility (and maturity), design features, operational considerations, secondary waste generation, safety/regulatory, and cost / schedule. These rough order-of-magnitude (ROM) cost estimates are intended to provide a comparison basis between technologies and are not intended to be actual project estimates.

  4. Hanford Tank Farm Vapors Abatement Technology and Vendor Proposals Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Burns, H. H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Farrar, M. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Fink, S. D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-09-20

    Suspected chemical vapor releases from the Hanford nuclear waste tank system pose concerns for worker exposure. Washington River Protection Solutions (WRPS) contracted the Savannah River National Laboratory (SRNL) to explore abatement technologies and strategies to remediate the vapors emitted through the ventilation system. In response, SRNL conducted an evaluation of technologies to abate, or reduce, vapor emissions to below 10% of the recognized occupational exposure limits (OELs). The evaluation included a review of published literature and a broadly communicated Request for Information to commercial vendors through a Federal Business Opportunities (Fed Biz Opps) web posting. In addition, SRNL conducted a workshop and post-workshop conference calls with interested suppliers (vendors) to assess proposals of relevant technologies. This report reviews applicable technologies and summarizes the approaches proposed by the vendors who participated in the workshop and teleconference interviews. In addition, the report evaluates the estimated performance of the individual technologies for the various classes of chemical compounds present in the Hanford Chemicals of Potential Concern (COPCs) list. Similarly, the report provides a relative evaluation of the vendor proposed approaches against criteria of: technical feasibility (and maturity), design features, operational considerations, secondary waste generation, safety/regulatory, and cost / schedule. These rough order-of-magnitude (ROM) cost estimates are intended to provide a comparison basis between technologies and are not intended to be actual project estimates.

  5. Plane strain forging of a niobium micro-alloyed steel

    International Nuclear Information System (INIS)

    Balancin, O.; Ferran L, G.; Rio de Janeiro Univ.

    1984-01-01

    Various termomechanical treatments were carried out on a niobium micro-alloyed steel and a low carbon steel as reference material, using an apparatus for hot phane strain forging. Control of processing variables and the presence of niobium strongly modify the austenite microstructure, which upon decomposition produces various phases such as polygonal and acicular ferrite and martensite, alone or together in variable proportions. Corresponding to this diversity of structures there is a wide variation in mechanical properties at room temperature: the initial yield point varies from 310 to 650 MPa and the reduction of area in uniaxial tension from 82 to 57% for the niobium steel. These results show that hot forging a niobium micro-alloyed steel may be a suitable manufacturing process for satisfying a wide range of specifications in a final product with low equivalent carbon. (Author) [pt

  6. Design of a forging processing route for a gas turbine compressor disc in IMI 834

    International Nuclear Information System (INIS)

    Clark, G.S.

    1993-01-01

    The microstructure in all parts of a modern gas turbine compressor disc must be carefully controlled to give the optimum balance for resistance to creep and fatigue. This is particularly true for advanced titanium alloys such as IMI834. Dynamic recrystallisation during high temperature deformation and static recrystallisation and grain growth during heat treatment, all have a profound effect on the grain structure of the disc. These processes are affected by temperature, rate of deformation and various microstructural features. These may include the size and volume fraction of primary alpha particles and current beta grain size. The construction of a computer model to simulate the forging process must therefore take all these factors into account to fully simulate the mechanical and microstructural behaviour of the material during processing. This requires a complete characterisation of the material to formulate mechanical and microstructural constitutive equations for use in a visco-plastic finite element forging model. Similarly the forging equipment must be fully characterised so that forging processes can be accurately simulated. (orig.)

  7. Near-liquidus forging, partial remelting and thixoforging of an AZ91D + Y magnesium alloy

    International Nuclear Information System (INIS)

    Zhao Zude; Chen Qiang; Hu Chuankai; Huang Shuhai; Wang Yuanqing

    2009-01-01

    A new route, near-liquidus forging plus partial remelting, has been developed for obtaining globular microstructures. Firstly, a material is formed by near-liquidus forging for obtaining a fine dendritic microstructure. Globular microstructure can be produced by reheating the material into the semi-solid temperature range for a period of time. In this paper, an AZ91D alloy with the addition of yttrium was prepared by near-liquidus forging. Microstructure evolution during partial remelting was studied at temperatures and for times. Tensile mechanical properties of thixoforged components were also determined. It is shown that the fine dendritic structure firstly evolves into a blocky structure during partial remelting. With prolonged holding time, the blocky structure disintegrates into polygonal solid particles. Prolonging time and increasing temperature promote a faster spheroidization. Good mechanical properties are obtained for the thixoforged AZ91D alloy with the addition of yttrium prepared by near-liquidus forging, with a yield strength of 160.9 MPa and a ultimate tensile strength of 301.7 MPa and a elongation to fracture of 9.734%.

  8. Current forgings and their properties for steam generator of nuclear plant

    International Nuclear Information System (INIS)

    Tsukada, Hisashi; Suzuki, Komei; Kusuhashi, Mikio; Sato, Ikuo

    1997-01-01

    Current steel forgings for steam generator (SG) of PWR plant are reviewed in the aspect of design and material improvement. The following three items are introduced. The use of integral type steel forgings for the fabrication of steam generator enhances the structural integrity and makes easier fabrication and inspection including in-service inspection. The following examples of current integral type forgings developed by the Japan Steel Works, Ltd. (JSW) are introduced: (1) primary head integrated with nozzles, manways and supports; (2) steam drum head integrated with nozzle and handhole; (3) conical shell integrated with cylindrical sections and handholes. In order to decrease the weight of steam generator, the high strength materials such as SA508, Cl.3a steel have been adopted in some cases. The properties of this steel are introduced and the chemistry and heat treatment condition are discussed. As one of the methods to minimize the macro- and micro-segregations, the use of vacuum carbon deoxidation (VCD), i.e. deoxidization of steel by gaseous CO reaction, with addition of Al for grain refining was investigated. The properties of SA508, Cl.3 steels with Low Si content are compared with those of conventional one

  9. Current forgings and their properties for steam generator of nuclear plant

    Energy Technology Data Exchange (ETDEWEB)

    Tsukada, Hisashi; Suzuki, Komei; Kusuhashi, Mikio; Sato, Ikuo [Japan Steel Works Ltd., Muroran (Japan)

    1997-12-31

    Current steel forgings for steam generator (SG) of PWR plant are reviewed in the aspect of design and material improvement. The following three items are introduced. The use of integral type steel forgings for the fabrication of steam generator enhances the structural integrity and makes easier fabrication and inspection including in-service inspection. The following examples of current integral type forgings developed by the Japan Steel Works, Ltd. (JSW) are introduced: (1) primary head integrated with nozzles, manways and supports; (2) steam drum head integrated with nozzle and handhole; (3) conical shell integrated with cylindrical sections and handholes. In order to decrease the weight of steam generator, the high strength materials such as SA508, Cl.3a steel have been adopted in some cases. The properties of this steel are introduced and the chemistry and heat treatment condition are discussed. As one of the methods to minimize the macro- and micro-segregations, the use of vacuum carbon deoxidation (VCD), i.e. deoxidization of steel by gaseous CO reaction, with addition of Al for grain refining was investigated. The properties of SA508, Cl.3 steels with Low Si content are compared with those of conventional one.

  10. Void consolidation during open-die forging for ultralarge rotor shafts. (1. Formulation of void-closing behavior)

    International Nuclear Information System (INIS)

    Ono, Shin-ichi; Minami, Katsuyuki; Ochiai, Tomoyuki; Iwadate, Tadao; Nakata, Shin-ichi.

    1995-01-01

    Open-die forging experiments using different die geometries under hot isothermal conditions and three-dimensional simulations using rigid-plastic finite-element method were performed to formulate a void-closing behavior using only two factors; the integral of hydrostatic stress and the equivalent strain. First, upsetting, side-upsetting and V-shape die cogging of several cylinders with a spherical void at the center are carried out and the information on the void volume reduction is obtained. Seconds, the same forgings, but without voids is treated numerically and the development of stress and strain at the location of voids is investigated. Then, by combining these results, and using regression analysis, it is found that the void volume reduction is expressed as a polynomial function of the two factors. When the polynomial function is used, various forging methods can be evaluated quantitatively in terms of void-closing behavior. Therefore it is beneficial to optimize the forging process for a large rotor shaft. (author)

  11. Effect of Forging Parameters on Low Cycle Fatigue Behaviour of Al/Basalt Short Fiber Metal Matrix Composites

    Directory of Open Access Journals (Sweden)

    R. Karthigeyan

    2013-01-01

    Full Text Available This paper deals with metal matrix composites (MMCs of Al 7075 alloy containing different weight percentage (2.5, 5, 7.5, and 10 basalt short fiber reinforcement and unreinforced matrix alloy. The samples were produced by the permanent stir casting technique. The casting ingots were cut into blanks to be forged in single stage and double stage, using MN press and graphite-based lubricant. The microstructures and fatigue properties of the matrix alloy and MMC samples were investigated in the as cast state and in the single and double stage forging operations. The microstructure results showed that the forged sample had a uniform distribution of the basalt short fiber throughout the specimens. Evaluation of the fatigue properties showed that the forged samples had higher values than those of the as cast counterparts. After forging, the enhancement of the fatigue strength of the matrix alloy was so significant and high in the case of 2.5 and 5.0 wt. percentage basalt short fiber reinforced MMC, and there was no enhancement in 7.5 and 10 weight percentages short fiber reinforced MMCs. The fracture damage was mainly due to decohesion at the matrix-fiber interface.

  12. Effect of forging parameters on low cycle fatigue behaviour of Al/basalt short fiber metal matrix composites.

    Science.gov (United States)

    Karthigeyan, R; Ranganath, G

    2013-01-01

    This paper deals with metal matrix composites (MMCs) of Al 7075 alloy containing different weight percentage (2.5, 5, 7.5, and 10) basalt short fiber reinforcement and unreinforced matrix alloy. The samples were produced by the permanent stir casting technique. The casting ingots were cut into blanks to be forged in single stage and double stage, using MN press and graphite-based lubricant. The microstructures and fatigue properties of the matrix alloy and MMC samples were investigated in the as cast state and in the single and double stage forging operations. The microstructure results showed that the forged sample had a uniform distribution of the basalt short fiber throughout the specimens. Evaluation of the fatigue properties showed that the forged samples had higher values than those of the as cast counterparts. After forging, the enhancement of the fatigue strength of the matrix alloy was so significant and high in the case of 2.5 and 5.0 wt. percentage basalt short fiber reinforced MMC, and there was no enhancement in 7.5 and 10 weight percentages short fiber reinforced MMCs. The fracture damage was mainly due to decohesion at the matrix-fiber interface.

  13. Evolution of A-Type Macrosegregation in Large Size Steel Ingot After Multistep Forging and Heat Treatment

    Science.gov (United States)

    Loucif, Abdelhalim; Ben Fredj, Emna; Harris, Nathan; Shahriari, Davood; Jahazi, Mohammad; Lapierre-Boire, Louis-Philippe

    2018-06-01

    A-type macrosegregation refers to the channel chemical heterogeneities that can be formed during solidification in large size steel ingots. In this research, a combination of experiment and simulation was used to study the influence of open die forging parameters on the evolution of A-type macrosegregation patterns during a multistep forging of a 40 metric ton (MT) cast, high-strength steel ingot. Macrosegregation patterns were determined experimentally by macroetch along the longitudinal axis of the forged and heat-treated ingot. Mass spectroscopy, on more than 900 samples, was used to determine the chemical composition map of the entire longitudinal sectioned surface. FORGE NxT 1.1 finite element modeling code was used to predict the effect of forging sequences on the morphology evolution of A-type macrosegregation patterns. For this purpose, grain flow variables were defined and implemented in a large scale finite element modeling code to describe oriented grains and A-type segregation patterns. Examination of the A-type macrosegregation showed four to five parallel continuous channels located nearly symmetrical to the axis of the forged ingot. In some regions, the A-type patterns became curved or obtained a wavy form in contrast to their straight shape in the as-cast state. Mass spectrometry analysis of the main alloying elements (C, Mn, Ni, Cr, Mo, Cu, P, and S) revealed that carbon, manganese, and chromium were the most segregated alloying elements in A-type macrosegregation patterns. The observed differences were analyzed using thermodynamic calculations, which indicated that changes in the chemical composition of the liquid metal can affect the primary solidification mode and the segregation intensity of the alloying elements. Finite element modeling simulation results showed very good agreement with the experimental observations, thereby allowing for the quantification of the influence of temperature and deformation on the evolution of the shape of the

  14. Analysis of hot rolling and hot forging effects on mechanical properties and microstructure of ZrNbMoGe alloy

    International Nuclear Information System (INIS)

    AH Ismoyo; Parikin; Bandriyana

    2014-01-01

    Research on formation technique by a combined method of rolling and forging has been carried out in order to improve the mechanical properties of ZrNbMoGe alloy to be used as fuel cladding in NPP (Nuclear Power Plant) application. The effects of rolling and forging were analyzed several tests. The tests were conducted for zirconium alloy specimen with a composition of (in % wt.) 97% Zr, 0,5% Mo, 2% Nb and 0,5% Ge, where the specimen was melted with an arc-furnace. The hot rolling and forging were conducted at 900 °C and 950 °C respectively. Hardness test was carried out by using a microhardness testing machine, while microstructure examination and crystal structure analysis were conducted with an optical microscope and an X-ray diffractometer. The results show that the hardness of the alloy increase from 141.21 HV (starting material) to 210.47 HV (hot rolled material) and 365.75 HV (hot forged material). Texturing phenomenon is clearly figured on the microstructure due to hot rolling and forging process. Analysis by diffractogram also indicates that the hot rolling and forging process has influence on the crystal orientation of dominant preferred direction in the reflection plane of (10ī1), recorded from the rise of intensity counting from about 2500 to 3000. In summary, hot forging and rolling process can change the mechanical properties (hardness and texture) and microstructure of materials. (author)

  15. Are all certified EHRs created equal? Assessing the relationship between EHR vendor and hospital meaningful use performance.

    Science.gov (United States)

    Holmgren, A Jay; Adler-Milstein, Julia; McCullough, Jeffrey

    2017-11-24

    The federal electronic health record (EHR) certification process was intended to ensure a baseline level of system quality and the ability to support meaningful use criteria. We sought to assess whether there was variation across EHR vendors in the degree to which hospitals using products from those vendors were able to achieve high levels of performance on meaningful use criteria. We created a cross-sectional national hospital sample from the Office of the National Coordinator for Health Information Technology EHR Products Used for Meaningful Use Attestation public use file and the Centers for Medicare & Medicaid Services Medicare EHR Incentive Program Eligible Hospitals public use file. We used regression models to assess the relationship between vendor and hospital performance on 6 Stage 2 Meaningful Use criteria, controlling for hospital characteristics. We also calculated how much variation in performance is explained by vendor choice. We found significant associations between specific vendor and level of hospital performance for all 6 meaningful use criteria. Epic was associated with significantly higher performance on 5 of the 6 criteria; relationships for other vendors were mixed, with some associated with significantly worse performance on multiple criteria. EHR vendor choice accounted for between 7% and 34% of performance variation across the 6 criteria. A nontrivial proportion of variation in hospital meaningful use performance is explained by vendor choice, and certain vendors are more often associated with better meaningful use performance than others. Our results suggest that policy-makers should improve the certification process by including more "real-world" scenario testing and provider feedback or ratings to reduce this variation. Hospitals can use these results to guide interactions with vendors. Vendor choice accounts for a meaningful proportion of variation in hospital meaningful use performance, and specific vendors are consistently associated

  16. The FORGE (Fate Of Repository Gases) pan European project

    International Nuclear Information System (INIS)

    Shaw, Richard

    2010-01-01

    Document available in extended abstract form only. Full text of publication follows: The multiple barrier concept is the cornerstone of all proposed schemes for underground disposal of radioactive wastes. The concept invokes a series of barriers, both engineered and natural, between the waste and the surface. Achieving this concept is the primary objective of all disposal programmes, from site appraisal and characterisation to repository design and construction. However, the performance of the repository as a whole (waste, buffer, engineering disturbed zone, host rock), and in particular its gas transport properties, are still poorly understood. Issues still to be adequately examined that relate to understanding basic processes include: dilational versus visco-capillary flow mechanisms; long-term integrity of seals, in particular gas flow along contacts; role of the EDZ as a conduit for preferential flow; laboratory to field up-scaling. Understanding gas generation and migration is thus vital in the quantitative assessment of repositories and is the focus of the research in this proposal for an integrated, multidisciplinary project. The FORGE project is a pan-European project with links to international radioactive waste management organisations, regulators and academia, specifically designed to tackle the key research issues associated with the generation and movement of repository gasses with partners from 24 organisations in 12 European countries. It is supported by funding under the European Commission FP7 Euratom programme and runs from 2009 to 2013. Of particular importance are the long-term performance of bentonite buffers, plastic clays, indurated mud-rocks and crystalline formations. Further experimental data are required to reduce uncertainty relating to the quantitative treatment of gas in performance assessment. FORGE will address these issues through a series of laboratory and field-scale experiments, including the development of new methods for up

  17. Cloud Challenges for an ERP Vendor

    DEFF Research Database (Denmark)

    Rebsdorf, Mads; Hedman, Jonas

    2014-01-01

    . In this paper, we present a case study of small and mid-sized Nordic ERP vendor. The case study describes company evolution and challenges when starting to compete strategically with SaaS offerings. We conclude by presenting a phased business model that deals with the old on-premises business as well...... as the companies’ new SaaS initiatives....

  18. 76 FR 52313 - Heavy Forged Hand Tools (i.e., Axes & Adzes, Bars & Wedges, Hammers & Sledges, and Picks...

    Science.gov (United States)

    2011-08-22

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-570-803] Heavy Forged Hand Tools (i.e... Administration, Department of Commerce. SUMMARY: As a result of the determinations by the Department of Commerce... on heavy forged hand tools (i.e., [[Page 52314

  19. Study of locations’characteristics for stabilization of street vendors in Surakarta City

    Science.gov (United States)

    Rahayu, M. J.; Buchori, I.; Widjajanti, R.

    2018-01-01

    Street vendors are usually centered around particular areas where they have made adaptations based on their activities, instead of scattered all over the city. These locations tend to be close to street vendors’ primary activities and consumers, occupy the public lands, and are productive and accessible. The Municipality of Surakarta has managed the street vendors in the form of stabilization and relocation. In Surakarta, there are 24 areas used for stabilization of street vendors varying in characteristics and quantities. This study uses a spatial analysis aiming to explain the characteristics of locations used for stabilization of street vendors and to identify their physical condition and arrangement. Furthermore, all of the research results will be used as the criteria in choosing the new locations that are suitable for the street vendors’ characteristics and consumers’ preference. The results show that the locations are on the roadsides of the neighborhood, local, and secondary collector roads. The traffic conditions in the stabilization areas are ranging from the very busy until relatively busy level since they are close to activities for trade, education, recreation, offices, and settlements.

  20. Shape optimization of metal forming and forging products using the stress equivalent static loads calculated from a virtual model

    International Nuclear Information System (INIS)

    Jang, Hwan Hak; Jeong, Seong Beom; Park, Gyung Jin

    2012-01-01

    A shape optimization is proposed to obtain the desired final shape of forming and forging products in the manufacturing process. The final shape of a forming product depends on the shape parameters of the initial blank shape. The final shape of a forging product depends on the shape parameters of the billet shape. Shape optimization can be used to determine the shape of the blank and billet to obtain the appropriate final forming and forging products. The equivalent static loads method for non linear static response structural optimization (ESLSO) is used to perform metal forming and forging optimization since nonlinear dynamic analysis is required. Stress equivalent static loads (stress ESLs) are newly defined using a virtual model by redefining the value of the material properties. The examples in this paper show that optimization using the stress ESLs is quite useful and the final shapes of a forming and forging products are identical to the desired shapes

  1. Food Safety Knowledge, Behavior, and Attitudes of Vendors of Poultry Products Sold at Pennsylvania Farmers' Markets

    Science.gov (United States)

    Scheinberg, Joshua; Radhakrishna, Rama; Cutter, Catherine N.

    2013-01-01

    A needs assessment survey was developed to assess the knowledge and attitudes of poultry vendors at farmers' markets in Pennsylvania, on food safety, regulation, and poultry production. Vendors were administered a 32-question paper survey, in person, during market hours. The results revealed critical vendor practices and identified important…

  2. Family Health and Financial Literacy--Forging the Connection

    Science.gov (United States)

    Braun, Bonnie; Kim, Jinhee; Anderson, Elaine A.

    2009-01-01

    Families are at-risk of or experiencing a diminished quality of living and life in current economic times and difficult decisions are required. Health and financial literacy are the basis for wise personal and public decision making. Family and consumer sciences (FCS) professionals can forge connections between health and financial literacy to…

  3. Forge, Arquillian, Swarm and Spring Boot: All play and no effort makes Simon a productive boy

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    During this live coding session, Simon will shine some light on a range productivity tools that make software development a pleasure rather than a chore. Simon will live code 2 applications; a Java EE application, with JBoss Forge which uses JPA, Bean Validation, REST and Angular. We’ll test this application using Arquillian from within JBoss Forge. We’ll also show how a Java EE microservice can be developed in Forge and run using JBoss Swarm. The second application will be developed on Spring Boot and using JRebel we’ll rapidly develop and run a Spring application. Attendees will learn how to write code productively using tools designed for developers.

  4. Optimization of the Hot Forging Processing Parameters for Powder Metallurgy Fe-Cu-C Connecting Rods Based on Finite Element Simulation

    Science.gov (United States)

    Li, Fengxian; Yi, Jianhong; Eckert, Jürgen

    2017-12-01

    Powder forged connecting rods have the problem of non-uniform density distributions because of their complex geometric shape. The densification behaviors of powder metallurgy (PM) connecting rod preforms during hot forging processes play a significant role in optimizing the connecting rod quality. The deformation behaviors of a connecting rod preform, a Fe-3Cu-0.5C (wt pct) alloy compacted and sintered by the powder metallurgy route (PM Fe-Cu-C), were investigated using the finite element method, while damage and friction behaviors of the material were considered in the complicated forging process. The calculated results agree well with the experimental results. The relationship between the processing parameters of hot forging and the relative density of the connecting rod was revealed. The results showed that the relative density of the hot forged connecting rod at the central shank changed significantly compared with the relative density at the big end and at the small end. Moreover, the relative density of the connecting rod was sensitive to the processing parameters such as the forging velocity and the initial density of the preform. The optimum forging processing parameters were determined and presented by using an orthogonal design method. This work suggests that the processing parameters can be optimized to prepare a connecting rod with uniform density distribution and can help to better meet the requirements of the connecting rod industry.

  5. Diverse basal and stress-related phenotypes of Sprague Dawley rats from three vendors

    NARCIS (Netherlands)

    Pecoraro, Norman; Ginsberg, Abigail B.; Warne, James P.; Gomez, Francisca; la Fleur, Susanne E.; Dallman, Mary F.

    2006-01-01

    Based on observed phenotypic differences in growth and ACTH responses to stress in Sprague Dawley rats obtained from different vendors, we ran head-to-head comparisons on rats obtained from three different vendors, Harlan, Charles River, and Simonsen, with respect to baseline phenotypic differences

  6. A two-step superplastic forging forming of semi-continuously cast AZ70 magnesium alloy

    Directory of Open Access Journals (Sweden)

    Pan Wang

    2015-03-01

    Full Text Available A two-step technology combined forging with superplastic forming has been developed to enhance the forgeability of semi-continuously cast AZ70 magnesium alloy and realize the application of the as-cast magnesium alloy in large deformation bullet shell. In the first step, fine-grained microstructure preforms that are suitable for superplastic forming were obtained by reasonably designing the size of the initial blanks with the specific height-to-diameter ratio, upsetting the blanks and subsequent annealing. In the second step, the heat treated preforms were forged into the end products at the superplastic conditions. The end products exhibit high quality surface and satisfied microstructure. Consequently, this forming technology that not only avoids complicating the material preparation but also utilizes higher strain rate superplastic provides a near net-shaped novel method on magnesium forging forming technology using as-cast billet.

  7. Management of Globally Distributed Software Development Projects in Multiple-Vendor Constellations

    Science.gov (United States)

    Schott, Katharina; Beck, Roman; Gregory, Robert Wayne

    Global information systems development outsourcing is an apparent trend that is expected to continue in the foreseeable future. Thereby, IS-related services are not only increasingly provided from different geographical sites simultaneously but beyond that from multiple service providers based in different countries. The purpose of this paper is to understand how the involvement of multiple service providers affects the management of the globally distributed information systems development projects. As research on this topic is scarce, we applied an exploratory in-depth single-case study design as research approach. The case we analyzed comprises a global software development outsourcing project initiated by a German bank together with several globally distributed vendors. For data collection and data analysis we have adopted techniques suggested by the grounded theory method. Whereas the extant literature points out the increased management overhead associated with multi-sourcing, the analysis of our case suggests that the required effort for managing global outsourcing projects with multiple vendors depends among other things on the maturation level of the cooperation within the vendor portfolio. Furthermore, our data indicate that this interplay maturity is positively impacted through knowledge about the client that has been derived based on already existing client-vendor relationships. The paper concludes by offering theoretical and practical implications.

  8. Forming of Hollow Shaft Forging From Titanium Alloy Ti6Al4V by Means of Rotary Compression

    Directory of Open Access Journals (Sweden)

    Tomczak J.

    2015-04-01

    Full Text Available This paper presents chosen results of theoretical-experimental works concerning forming of hollow shafts forgings from titanium alloys, which are applied in aviation industry. At the first stage of conducted analysis, the forging forming process was modeled by means of finite element method. Calculations were made using software Simufact Forming. On the basis of performed simulations optimal parameters of rotary compression process were determined. Next, experimental tests of forging forming in laboratory conditions were made. For the research needs, a forging aggregate, designed by the Authors, was used. Conducted research works confirmed the possibility of metal forming (by means of rotary compression of hollow shafts from hard workable titanium alloys. Numerous advantages of rotary compression process, make it attractive both for low series production (aircraft industry and for mass production (automotive industry.

  9. Development of forging technology for PWR primary piping

    International Nuclear Information System (INIS)

    Morin, F.; Badeau, J.P.; Lambs, R.

    1996-01-01

    The purpose of this presentation is to give information on the changes in the design and manufacture of Primary Piping for electronuclear boilers of the Pressurized Water Reactor type (PWR) which has resulted in the making of one-piece forged lines including stub pipes and arcs. The optimization of these items is aimed at improving the life of the new power stations as well as guaranteeing their safety, while reducing inspection and maintenance requirements in service. The demonstration of the manufacturing feasibility has just been completed. It has taken material form in the installation, on the CIVAUX 1 section, of the first one-piece cold leg in the world. It will shortly be followed by the installation on the CIVAUX 2 section of a complete loop of bent forged pipes. Therefore, this new know-how is going to be incorporated in the French Rules (RCC-M) and can be directly taken into consideration both in the next work to be done and in the design and definition of a future nuclear reactor

  10. Numerical optimization of die geometry in open die forging

    DEFF Research Database (Denmark)

    Christiansen, Peter; Hattel, Jesper Henri; Bay, Niels

    2013-01-01

    This paper deals with numerical optimization of open die forging of large metallic ingots made by casting implying risk of defects, e.g. central pores. Different material hardening properties and die geometries are combined in order to investigate, which geometry gives rise to maximum closure...

  11. The effect of strain distribution on microstructural developments during forging in a newly developed nickel base superalloy

    Energy Technology Data Exchange (ETDEWEB)

    Buckingham, R.C. [Institute of Structural Materials, Swansea University, Bay Campus, Fabian Way, Swansea SA1 8EN (United Kingdom); Argyrakis, C.; Hardy, M.C. [Rolls-Royce plc, PO Box 31, Derby DE24 8BJ (United Kingdom); Birosca, S., E-mail: 522042@swansea.ac.uk [Institute of Structural Materials, Swansea University, Bay Campus, Fabian Way, Swansea SA1 8EN (United Kingdom)

    2016-01-27

    In the current study, the effect of strain distribution in a simple forging geometry on the propensity for recrystallization, and its impact on mechanical properties has been investigated in a newly developed experimental nickel-based superalloy. The new alloy was produced via a Powder Metallurgy (PM) route and was subsequently Hot Isostatic Processed (HIP), isothermally forged, and heat treated to produce a coarse grain microstructure with average grain size of 23–32 μm. The alloy was examined by means of Electron Back-Scatter Diffraction (EBSD) to characterise the microstructural features such as grain orientation and morphology, grain boundary characteristics and the identification of potential Prior Particle Boundaries (PPBs) throughout each stage of the processing route. Results at the central region of the cross-section plane parallel to the loading direction showed significant microstructural differences across the forging depth. This microstructural variation was found to be highly dependent on the value of local strain imparted during forging such that areas of low effective strain showed partial recrystallisation and a necklace grain structure was observed following heat treatment. Meanwhile, a fully recrystallised microstructure with no PPBs was observed in the areas of high strain values, in the central region of the forging.

  12. Innovation in partnership sourcing from a vendor's pespective

    DEFF Research Database (Denmark)

    Barlach, Anders; Simonsen, Jesper

    2011-01-01

    -driven innovation at the IT vendor CSC Scandihealth A/S. CSC Scandihealth’s business strategy regarding effects-driven innovation is described and related to a partner sourcing model with a client, a hospital in the North Region of Denmark. The chapter analyses how innovation can be organized and the different......This chapter describes three generic categories of assets for technological innovation: 1) process innovative assets, 2) product innovative application assets, and 3) aesthetic design assets (Christensen, 1995). These different types of innovation are used as a framework for discussing effects...... stakeholders, contexts, and perspectives undertaken by the vendor and the client while engaging in partnership sourcing supported by effects-driven innovation. The experiences and challenges are discussed on the basis of a number of projects with the vendor’s clients....

  13. 77 FR 39997 - Heavy Forged Hand Tools, Finished or Unfinished, With or Without Handles From the People's...

    Science.gov (United States)

    2012-07-06

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-570-803] Heavy Forged Hand Tools...) (Diamond Sawblades), the Department is notifying the public that the final judgment in this case is not in... review on heavy forged hand tools, finished or unfinished, with or without handles from the People's...

  14. Standard specification for titanium and titanium alloy forgings

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    Standards are given for the purchase, manufacture, product testing and certification, packaging, and marketing of annealed Ti and Ti-alloy forgings. The specifications apply to the following Ti alloys: 6Al-Ti-4V, 5Al-Ti-2.5 Sn, and Ti + Pd. Acceptable values for the chemical requirements, product analysis limits, and tensile requirements are tabulated

  15. Coordinating vendor-buyer decisions for imperfect quality items considering trade credit and fully backlogged shortages

    Science.gov (United States)

    Khanna, Aditi; Gautam, Prerna; Jaggi, Chandra K.

    2016-03-01

    Supply chain management has become a critical issue for modern business environments. In today's world of cooperative decision-making, individual decisions in order to reduce inventory costs may not lead to an overall optimal solution. Coordination is necessary among participants of supply chain to achieve better performance. There are legitimate and important efforts from the vendor to enhance the relation with buyer; one such effort is offering trade credit which has been a driver of growth and development of business between them. The cost of financing is a core consideration in effective financial management, in general and in context of business. Also, due to imperfect production a vendor may produce defective items which results in shortages. Motivated with these aspects, an integrated vendor-buyer inventory model is developed for imperfect quality items with allowable shortages; in which the vendor offers credit period to the buyer for payment. The objective is to minimize the total joint annual costs incurred by the vendor and the buyer by using integrated decision making approach. The expected total annual integrated cost is derived and a solution procedure is provided to find the optimal solution. Numerical analysis shows that the integrated model gives an impressive cost reduction, in comparison to independent decision policies by the vendor and the buyer.

  16. Vendors: Gifts Are the Exception to the Rule.

    Science.gov (United States)

    Natale, Jo Anna

    1992-01-01

    Informal interviews with several people working in different industries reveal that, without exception, the vendors say companies do not routinely offer school officials gifts and entertainment to sway purchasing decisions, but that it does happen. (MLF)

  17. What history reveals about Forge River pollution on Long Island, New York's south shore.

    Science.gov (United States)

    Swanson, R Lawrence; Brownawell, B; Wilson, Robert E; O'Connell, Christine

    2010-06-01

    Fifty years ago, the Forge River and Moriches Bay, of Long Island's south shore lagoonal system, achieved notoriety when their polluted conditions were alluded to in a report of the US President's Science Advisory Committee (1965). The Woods Hole Oceanographic Institution investigated the bay throughout the 1950s, identifying duck farming as the cause of "objectionable", "highly contaminated" conditions of these waters. Much has changed: duck farming declined; the river was dredged to remove polluted sediments, improve navigation; and barrier island inlets stabilized. Yet, the river remains seasonally eutrophic. Why? This paper reviews what occurred in the Forge River watershed. While governments aggressively curtailed the impacts of duck pollution, they failed to manage development and sewage pollution. The Forge experience indicates that watershed management is a continuing governmental responsibility as development accelerates. Otherwise, we will always be looking for that instantaneous remediation that is usually not affordable and is socially contentious.

  18. Open die forging of large shafts with porosity defects – physical and numerical modelling

    DEFF Research Database (Denmark)

    Christiansen, Peter; Hattel, Jesper Henri; Bay, Niels

    2013-01-01

    The aim and scope of this paper is centered to analyze the influence of the geometry of V-shaped dies on the closure of internal centerline porosity defects in ingots during multistep open-die forging. The investigation is performed with small scale physical models made from lead using V-shaped d......The aim and scope of this paper is centered to analyze the influence of the geometry of V-shaped dies on the closure of internal centerline porosity defects in ingots during multistep open-die forging. The investigation is performed with small scale physical models made from lead using V......-shaped dies with 90o and 120o and a reference pair of flat parallel platens. Holes drilled through the center of these preforms are produced to mimic centerline porosity in full scale cast ingots and intermediate rotation of the preforms replicate a multi-stage forging sequence under laboratory testing...

  19. Multi-objective optimization of die geometry in ingot forging

    DEFF Research Database (Denmark)

    Christiansen, Peter; Martins, Paulo A.F.; Bay, Niels

    2014-01-01

    The soundness of an ingot after hot forging with different V-shaped lower dies is evaluated using finite element simulations.Two different modelling approaches that make use of uncoupled ductile damage and coupled ductile damage based on porousplasticity are employed. It is shown that the two...

  20. Skills development in the informal sector in India: The case of street food vendors

    Science.gov (United States)

    Pilz, Matthias; Uma, Gengaiah; Venkatram, Rengan

    2015-04-01

    The informal sector dominates India's economic life, so issues of skills development are particularly important. On the basis of a survey of 49 street food vendors in the Indian cities of New Delhi and Coimbatore, the authors of this article demonstrate that informal learning is a particularly significant form of vocational education and training. Vendors do not acquire skills in formal vocational education and training (VET) settings; for them, opportunities for learning on the job in family businesses or in informal employment are especially important. Unlike other studies, the authors' findings show that street food vendors have a wide range of specialist knowledge, skills and expertise required to conduct their business which they deploy profitably. These skills are not confined to preparing and selling food but also extend to areas such as price setting and marketing. All the street food vendors interviewed identified strongly with their occupation and expressed pride in it. Around half voiced a wish for further training. In this context, the authors suggest promoting non-formal learning settings geared explicitly to street food vendors' difficult working conditions. In line with a few other international innovative schemes, they term this a "non-formal apprenticeship" approach.

  1. Impact of information technology on vendor objectives, capabilities, and competences in contract electronic manufacturing

    DEFF Research Database (Denmark)

    Perunovic, Zoran; Mefford, Robert; Christoffersen, Mads

    2012-01-01

    IT impacts vendor capabilities. The research framework integrates four concepts/theories: the resource-based view (RBV), the concept of manufacturing strategy, the concept of business performance, and the concept of IT impact on business performance. Two case companies are studied, one with a high level...... proposed. The method gives valuable insights into how IT enables competences, enhances capabilities, and contributes to the fulfillment of vendor objectives. A model of how IT affects a vendor's competitiveness is proposed. In addition, two initiatives for optimizing the utilization of IT are suggested....

  2. Manufacturing of ultra-large diameter 20 MnMoNi 5 5 steel forgings for reactor pressure vessels and their properties

    International Nuclear Information System (INIS)

    Onodera, S.; Kawaguchi, S.; Tsukada, H.; Moritani, H.; Suzuki, K.; Sato, I.

    1985-01-01

    As the structural material for RPV typical of increased dimensions, as set of ultra-large diameter steel forgings for a PHWR RPV is presented as outlined below. (1) Material designation: 20 MnMoNi 5 5 (similar to SA508, Cl.3) (2) Size of the forgings: flanges, 8.440 mm OD, a weight of 238 tons for shell flange; shells and torus, 7,920 mm OD, with large height, cover dome, 6,800 mm OD in chord and 460 mm thick; blank before formed to dome is ca. 8,000 mm OD. (3) Chemical composition: particular effort was made for minimizing the tramp elements as P, S, As, Sn, Sb, Cu. (4) Manufacturing, key points: steel making - combined refining and degassing in ladle; ingot making - largest size ingots, including 570 ton and 500 ton ingots; forging - special ''outside-the-press'' forging and forming techniques; heat treatment - prevention of H 2 flaking in normalizing and tempering and handling of the extra-large forgings at water quenching. (5) Metallurgical properties: sufficiently uniform carbon distributions in the forgings; a lowest possible content of hydrogen, non-metallic inclusions and oxygen. Mechanical properties: uniformity in tensile and toughness properties; flaws - only limited number of spots of UT indications under 2 mm EFG (EFS). (orig.)

  3. Weldability and mechanical property characterization of weld clad alloy 800H tubesheet forging

    International Nuclear Information System (INIS)

    King, J.F.; McCoy, H.E.

    1984-09-01

    The weldability of an alloy 800H forging that simulates a steam generator tubesheet is studied. Weldability was of concern because a wide range of microstructures was present in this forging. The top and portions of the bottom were weld clad with ERNiC-3 weld metal to a thickness of 19 mm similar to that anticipated for HTGR steam generators. Examinations of the clad fusion line in various regions revealed no weldability problems except possibly on the bottom portion, which contained large grains and some as-cast structure. A few microfissures were evident in this region, but no excessive hot cracking tendency was observed. The tensile properties in all areas of the clad forging were reasonable and not influenced greatly by the microstructure. The elevated-temperature tests showed strong tendency for fracture in the heat-affected zone of the alloy 800H. Creep failure at 649 0 C consistently occurred in the heat-affected zone of the alloy 800H, but the creep strength exceeded the expected values for alloy 800H

  4. Material Behavior Based Hybrid Process for Sheet Draw-Forging Thin Walled Magnesium Alloys

    International Nuclear Information System (INIS)

    Sheng, Z.Q.; Shivpuri, R.

    2005-01-01

    Magnesium alloys are conventionally formed at the elevated temperatures. The thermally improved formability is sensitive to the temperature and strain rate. Due to limitations in forming speeds, tooling strength and narrow processing windows, complex thin walled parts cannot be made by traditional warm drawing or hot forging processes. A hybrid process, which is based on the deformation mechanism of magnesium alloys at the elevated temperature, is proposed that combines warm drawing and hot forging modes to produce an aggressive geometry at acceptable forming speed. The process parameters, such as temperatures, forming speeds etc. are determined by the FEM modeling and simulation. Sensitivity analysis under the constraint of forming limits of Mg alloy sheet material and strength of tooling material is carried out. The proposed approach is demonstrated on a conical geometry with thin walls and with bottom features. Results show that designed geometry can be formed in about 8 seconds, this cannot be formed by conventional forging while around 1000s is required for warm drawing. This process is being further investigated through controlled experiments

  5. Patent medicine vendors are major providers antimalaria treatment

    African Journals Online (AJOL)

    pre-intervention value (5.5% versus 3.6%; p>0.05) and significantly lower than the post training values. (p<0.001). ... Profit was the core factor underlying the negative practices among the patent medicine vendors. .... Give cheaper drugs.

  6. The effects of thermomechanical history on the microstructure of a nickel-base superalloy during forging

    Energy Technology Data Exchange (ETDEWEB)

    Gardner, S., E-mail: 485354@swansea.ac.uk [College of Engineering, Bay Campus, Swansea University, Swansea SA1 8EN (United Kingdom); Li, W. [Rolls-Royce plc, PO Box 31, Derby DE24 8BJ (United Kingdom); Coleman, M. [College of Engineering, Bay Campus, Swansea University, Swansea SA1 8EN (United Kingdom); Johnston, R., E-mail: r.johnston@swansea.ac.uk [College of Engineering, Bay Campus, Swansea University, Swansea SA1 8EN (United Kingdom)

    2016-06-21

    The effect of thermo-mechanical history on hot compression behaviour and resulting microstructures of a nickel base superalloy is presented. Hot compression tests were carried out on HAYNES® 282® specimens to varying strains from 0.1 to 0.8. Both single pass and multi-pass tests were completed. 60 min inter-pass times were utilized to accurately replicate industrial forging practices. The effect of dynamic, metadynamic and static recrystallization during inter-pass times on flow stress was investigated. The resulting microstructures were analysed using scanning electron, optical microscopy and EBSD to relate grain size and homogeneity with flow stress data. The study showed a negligible difference between multi-pass and single pass tests for strain increments above 0.2. Therefore, when modelling similar low strain and strain rate forging processes in HAYNES® 282®, previous forging steps can be ignored.

  7. 31 CFR 370.40 - Can I be held accountable if my negligence contributes to a forged signature?

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Can I be held accountable if my negligence contributes to a forged signature? 370.40 Section 370.40 Money and Finance: Treasury Regulations... if my negligence contributes to a forged signature? (a) General. If your failure to exercise ordinary...

  8. Gaining Leverage Over Vendor Lock to Improve Acquisition Performance and Cost Efficiencies

    Science.gov (United States)

    2014-04-30

    Virginia Wydler, MITRE Corporation Open Systems Architecture License Rights: A New Era for the Public– Private Market -Place Nickolas Guertin, DASN RDT...if only one vendor can replace or upgrade those key components, that de facto monopolist may be able to exert excess negotiating leverage over...instead of sole source subcontractor procurement. The Program Office should have the prime vendor to provide a full market research data in accordance

  9. Sensitivity Analysis of Oxide Scale Influence on General Carbon Steels during Hot Forging

    Directory of Open Access Journals (Sweden)

    Bernd-Arno Behrens

    2018-02-01

    Full Text Available Increasing product requirements have made numerical simulation into a vital tool for the time- and cost-efficient process design. In order to accurately model hot forging processes with finite, element-based numerical methods, reliable models are required, which take the material behaviour, surface phenomena of die and workpiece, and machine kinematics into account. In hot forging processes, the surface properties are strongly affected by the growth of oxide scale, which influences the material flow, friction, and product quality of the finished component. The influence of different carbon contents on material behaviour is investigated by considering three different steel grades (C15, C45, and C60. For a general description of the material behaviour, an empirical approach is used to implement mathematical functions for expressing the relationship between flow stress and dominant influence variables like alloying elements, initial microstructure, and reheating mode. The deformation behaviour of oxide scale is separately modelled for each component with parameterized flow curves. The main focus of this work lies in the consideration of different materials as well as the calculation and assignment of their material properties in dependence on current process parameters by application of subroutines. The validated model is used to carry out the influence of various oxide scale parameters, like the scale thickness and the composition, on the hot forging process. Therefore, selected parameters have been varied within a numerical sensitivity analysis. The results show a strong influence of oxide scale on the friction behaviour as well as on the material flow during hot forging.

  10. A new Friction and Lubrication Test for Cold Forging

    DEFF Research Database (Denmark)

    Bay, Niels; Wibom, Ole; Aalborg Nielsen, J

    1995-01-01

    This paper presents a new friction and lubrication test for cold forging. The test allows controlled variation of the surface expansion in the range 0-2000%, the tool temperature in the range 20-270°C and the sliding length between 0 and infinite. Friction is decreasing with increasing temperature...

  11. The relationship between hospital and ehr vendor market dynamics on health information organization presence and participation.

    Science.gov (United States)

    Lin, Sunny C; Adler-Milstein, Julia

    2018-05-08

    Health Information Organizations (HIOs) are third party organizations that facilitate electronic health information exchange (HIE) between providers in a geographic area. Despite benefits from HIE, HIOs have struggled to form and subsequently gain broad provider participation. We sought to assess whether market-level hospital and EHR vendor dynamics are associated with presence and level of hospital participation in HIOs. 2014 data on 4523 hospitals and their EHR vendors were aggregated to the market level. We used multivariate OLS regression to analyze the relationship between hospital and vendor dynamics and (1) probability of HIO presence and (2) percent of hospitals participating in an HIO. 298 of 469 markets (64%) had HIO presence, and in those markets, 47% of hospitals participated in an HIO on average. In multivariate analysis, four characteristics were associated with HIO presence. Markets with more hospitals, markets with more EHR vendors, and markets with an EHR vendor-led HIE approach were more likely to have an HIO. Compared to markets with low hospital competition, markets with high hospital competition had a 25 percentage point lower probability of HIO presence. Two characteristics were associated with level of hospital HIO participation. Markets with more hospitals as well as markets with high vendor competition (compared to low competition) had lower participation. Both hospital and EHR vendor dynamics are associated with whether a market has an HIO as well as the level of hospital participation in HIOs.

  12. Investigating the effect of variable gutter technique as a novel method on vertical flow of material in closed die forging processes

    Energy Technology Data Exchange (ETDEWEB)

    Pourbashiri, M.; Sedighi, M. [Iran University, Tehran (Iran, Islamic Republic of)

    2016-04-15

    Recently, Variable gutter technique has been introduced as a novel method in order to reduce waste materials in closed-die forging processes. In this paper, the capability of this method is investigated for a family of forged parts that the vertical flow of material is the last stage of forming process. As a case study, using the variable gutter technique, the amount of waste material is decreased about 50% for a sample forged part with a local rising. The results of FVM simulations and experiments confirmed the effectiveness of the variable gutter technique in such forging processes. The vertical flow of material in the die cavity (h parameter), as a criterion, for different gutter width and thickness dimensions was examined by FVM simulations. The results shown that the gutter thickness has more effect on vertical flow of material than the gutter width. By decreasing the gutter thickness and increasing the gutter width, the amount of vertical flow of material is increased about 120% and 29%, respectively. Finally, A/H ratio (A = Max width of sectional area of a forged part, H = Max height of a forged part) is proposed as shape complexity factor of a forged part. The results of FVM simulations are indicated that for the ratio of A/H > 2, the variable gutter thickness technique is more effective and can be successfully used to reduce the amount of waste materials.

  13. Application of directional solidification ingot (LSD) in forging of PWR reactor vessel heads

    International Nuclear Information System (INIS)

    Benhamou, C.; Poitrault, I.

    1985-09-01

    Creusot-Loire Industrie uses this type of ingot for manufacture of Framatome 1300 and 1450 MW 4-loop PWR reactor vessel heads. This type of ingot offers a number advantages: improved internal soundness; greater chemical, structural and mechanical homogeneity of the finished part; simplified forging process. After a brief description of the pouring and solidification processes, this paper presents an analysis of the results of examinations performed on the prototype forging, as well as review of results obtained during industrial fabrication of dished heads from LSD ingots. The advantages of the LSD ingot over conventional ingots are discussed in conclusion

  14. Electronic health record usability: analysis of the user-centered design processes of eleven electronic health record vendors.

    Science.gov (United States)

    Ratwani, Raj M; Fairbanks, Rollin J; Hettinger, A Zachary; Benda, Natalie C

    2015-11-01

    The usability of electronic health records (EHRs) continues to be a point of dissatisfaction for providers, despite certification requirements from the Office of the National Coordinator that require EHR vendors to employ a user-centered design (UCD) process. To better understand factors that contribute to poor usability, a research team visited 11 different EHR vendors in order to analyze their UCD processes and discover the specific challenges that vendors faced as they sought to integrate UCD with their EHR development. Our analysis demonstrates a diverse range of vendors' UCD practices that fall into 3 categories: well-developed UCD, basic UCD, and misconceptions of UCD. Specific challenges to practicing UCD include conducting contextually rich studies of clinical workflow, recruiting participants for usability studies, and having support from leadership within the vendor organization. The results of the study provide novel insights for how to improve usability practices of EHR vendors. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  15. Licensee contractor and vendor inspection status report. Quarterly report, January-March 1986. Volume 10, No. 1

    International Nuclear Information System (INIS)

    1986-05-01

    The NRC vendor inspection focus has been shifted to vendor activities associated with nuclear plant operation, maintenance, and modifications, more than firms designing nuclear steam supply systems, architect engineering firms designing nuclear plants, and major equipment vendors. Results of 16 inspections are reported, giving for each organization inspected, their activity, inspection bases and scope, and any violations, nonconformances, or unresolved items found. The status of previous inspection findings are also given

  16. Effect of nonmetallic inclusions on anisotropy of ductility in 35KhN3MFA steel forgings

    International Nuclear Information System (INIS)

    Shtremel', M.A.; Yavojskij, V.I.; Volkov, V.A.; Chursin, G.M.; Chukhlov, V.I.; Fetisov, G.I.; Mochalin, N.K.; Smol'yaninov, L.V.

    1980-01-01

    Characteristics of nonmetaltic inclusions and anizotropy of ductility and of impuct strength of forgings of the 35KhN3MFA steel are compared at different variants of melting and outer-furnace treatment. It is shown that method of melting rugulates anisotropy of ductility primarily through deformability of large inclusions during forging. Deformability of inclusions considerably changes due to introduction of silicocalcium in iron mold [ru

  17. Networking activities and perceptions of HIV risk among male migrant market vendors in China.

    Science.gov (United States)

    Wang, Wenqing; Muessig, Kathryn E; Li, Mingqiang; Zhang, Ying-Xia; Zhang, Yingxia

    2014-02-01

    HIV research among internal migrants in China has not fully explored the contexts and perceptions of "risk". In 2011, urban markets in Liuzhou, China were mapped, and sixty male vendors, age 22-56, were selected for in-depth interviews on migration, social and family life, and perceptions and practices of sexual risk behavior. Participants were evenly divided among higher income shop and small stall vendors. All men were sexually active. Only the shop vendors reported non-marital sexual partners, including concurrent partners (n = 15), commercial partners (n = 10), and other sexual relationships (n = 11). Shop vendors engaged in networking activities that facilitated commercial and non-commercial high-risk sex. Perceptions of HIV risk from commercial sex led some men to doubt the protective ability of condoms and rely on local (unproven) self-protection techniques. Networking activities played a role in high-risk sex and shaping migrants' risk perceptions and health practices. The networks created through these processes could also be used to facilitate health promotion activities.

  18. Development of production technology and investigation of quality for forged-welded turbine rotors of steel 25Kh2NVFA

    International Nuclear Information System (INIS)

    Borisov, I.A.; Merinov, G.N.; Slezkina, E.V.

    1997-01-01

    A study was made into mechanical properties and microstructure of turbine rotor components manufactured by forging and heat treated under various conditions. It is revealed that the optimal heat treatment of forgings must include double quenching with subsequent tempering at 630-640 deg C for 10-20 h. Forged and welded rotors should be tempered at 620-630 deg C for 50-100 h. Microscopic examination and mechanical tests showed that low alloy steel 25Kh2NMF can be successfully used for manufacturing rotors of high-, medium-and low-heat turbines

  19. Health information technology vendor selection strategies and total factor productivity.

    Science.gov (United States)

    Ford, Eric W; Huerta, Timothy R; Menachemi, Nir; Thompson, Mark A; Yu, Feliciano

    2013-01-01

    The aim of this study was to compare health information technology (HIT) adoption strategies' relative performance on hospital-level productivity measures. The American Hospital Association's Annual Survey and Healthcare Information and Management Systems Society Analytics for fiscal years 2002 through 2007 were used for this study. A two-stage approach is employed. First, a Malmquist model is specified to calculate hospital-level productivity measures. A logistic regression model is then estimated to compare the three HIT adoption strategies' relative performance on the newly constructed productivity measures. The HIT vendor selection strategy impacts the amount of technological change required of an organization but does not appear to have either a positive or adverse impact on technical efficiency or total factor productivity. The higher levels in technological change experienced by hospitals using the best of breed and best of suite HIT vendor selection strategies may have a more direct impact on the organization early on in the process. However, these gains did not appear to translate into either increased technical efficiency or total factor productivity during the period studied. Over a longer period, one HIT vendor selection strategy may yet prove to be more effective at improving efficiency and productivity.

  20. Internet cigarette vendor compliance with credit card payment and shipping bans.

    Science.gov (United States)

    Williams, Rebecca S; Ribisl, Kurt M

    2014-02-01

    Most Internet cigarette sales have violated taxation and youth access laws, leading to landmark 2005 agreements with credit card companies, PayPal, and private shippers (United Parcel Service, Federal Express, DHL) to cease participation in these transactions. Despite their promise at the time, loopholes allowed for check payment and U.S. Postal Service (USPS) shipping. This study assessed actual vendor compliance with the payment and shipping bans using a purchase survey. In late 2007 and early 2008, an adult buyer attempted to order cigarettes from the 97 most popular Internet cigarette vendors (ICVs) using banned payment and shipping methods. When banned payment or shipping methods were unavailable, purchases were attempted with alternate methods (e.g., checks, e-checks, USPS). Twenty-seven of 100 orders were placed with (banned) credit cards; 23 were successfully received. Seventy-one orders were placed with checks (60 successfully received). Four orders were delivered using banned shippers; 79 of 83 successfully received orders were delivered by the USPS. About a quarter of ICVs violated the payment ban, others adapted by accepting checks. Most vendors complied with the shipping ban, perhaps because USPS was an easy substitute shipping option. Better enforcement of the bans is needed; the 2009 Prevent All Cigarette Trafficking Act closed the USPS loophole by making cigarettes nonmailable material; evaluation of enforcement efforts and adaptations by vendors are needed. These sorts of bans are a promising approach to controlling the sale of restricted goods online.

  1. Development of SiC Nanoparticles and Second Phases Synergistically Reinforced Mg-Based Composites Processed by Multi-Pass Forging with Varying Temperatures

    Directory of Open Access Journals (Sweden)

    Kaibo Nie

    2018-01-01

    Full Text Available In this study, SiC nanoparticles were added into matrix alloy through a combination of semisolid stirring and ultrasonic vibration while dynamic precipitation of second phases was obtained through multi-pass forging with varying temperatures. During single-pass forging of the present composite, as the deformation temperature increased, the extent of recrystallization increased, and grains were refined due to the inhibition effect of the increasing amount of dispersed SiC nanoparticles. A small amount of twins within the SiC nanoparticle dense zone could be found while the precipitated phases of Mg17Al12 in long strips and deformation bands with high density dislocations were formed in the particle sparse zone after single-pass forging at 350 °C. This indicated that the particle sparse zone was mainly deformed by dislocation slip while the nanoparticle dense zone may have been deformed by twinning. The yield strength and ultimate tensile strength of the composites were gradually enhanced through increasing the single-pass forging temperature from 300 °C to 400 °C, which demonstrated that initial high forging temperature contributed to the improvement of the mechanical properties. During multi-pass forging with varying temperatures, the grain size of the composite was gradually decreased while the grain size distribution tended to be uniform with reducing the deformation temperature and extending the forging passes. In addition, the amount of precipitated second phases was significantly increased compared with that after multi-pass forging under a constant temperature. The improvement in the yield strength of the developed composite was related to grain refinement strengthening and Orowan strengthening resulting from synergistical effect of the externally applied SiC nanoparticles and internally precipitated second phases.

  2. 26 CFR 1.936-10 - Qualified investments.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 10 2010-04-01 2010-04-01 false Qualified investments. 1.936-10 Section 1.936... (CONTINUED) INCOME TAXES Possessions of the United States § 1.936-10 Qualified investments. (a) In general. [Reserved] (b) Qualified investments in Puerto Rico. [Reserved] (c) Qualified investment in certain...

  3. Modelling the void deformation and closure by hot forging of ingot castings

    DEFF Research Database (Denmark)

    Christiansen, Peter; Hattel, Jesper Henri; Kotas, Petr

    2012-01-01

    by mechanical deformation. The aim of this paper is to analyze numerically if and to what degree the voids areclosed by the forging. Using the commercial simulation software ABAQUS, both simplified model ingots and physically manufactured ingots containing prescribed void distributions are deformed and analyzed....... The analysis concernsboth the void density change and the location of the voids in the part after deformation. The latter can be important for the subsequent reliability of the parts, for instance regarding fatigue properties. The analysis incorporates the Gurson yield criterion for metals containing voids...... and focuses on how the voids deform depending on their size and distribution in the ingot as well ashow the forging forces are applied....

  4. Willingness of Herbal Medicine Practitioners and Herbs Vendors to ...

    African Journals Online (AJOL)

    Willingness of Herbal Medicine Practitioners and Herbs Vendors to Contribute Financially to Conservation of Medicinal Plants in Ibadan, ... PROMOTING ACCESS TO AFRICAN RESEARCH ... The earlier version of this paper had some errors.

  5. The Dynamic Environment of Crypto Markets: The Lifespan of New Psychoactive Substances (NPS and Vendors Selling NPS

    Directory of Open Access Journals (Sweden)

    Elle Wadsworth

    2018-03-01

    Full Text Available The Internet has played a major role in the distribution of New Psychoactive Substances (NPS, and crypto markets are increasingly used for the anonymous sale of drugs, including NPS. This study explores the availability of individual NPS and vendors on the crypto markets and considers whether crypto markets are a reliable platform for the sale of NPS. Data was collected from 22 crypto markets that were accessed through the hidden web using the Onion Router (Tor. Data collection took place bimonthly from October 2015 to October 2016 as part of the CASSANDRA (Computer Assisted Solutions for Studying the Availability aNd DistRibution of novel psychoActive substances project. In seven snapshots over 12 months, 808 unique vendors were found selling 256 unique NPS. The total number of individual NPS and vendors increased across the data collection period (increase of 93.6% and 71.6%, respectively. Only 24% (n = 61 of the total number of NPS and 4% (n = 31 of vendors appeared in every snapshot over the 12 months, whereas 21% (n = 54 of NPS and 45% (n = 365 of vendors only appeared once throughout the data collection. The individual NPS and vendors did not remain the same over the 12 months. However, the availability of NPS and vendors selling NPS grew. NPS consistently available on crypto markets could indicate popular substances.

  6. Choosing a Vendor: Where to Buy a Micro.

    Science.gov (United States)

    Mason, Robert M.

    1983-01-01

    Examines options for buying microcomputers (the manufacturer or his/her representative, computer stores, general retail stores, mail order, system integrators, traditional vendors, second-hand). Three major factors are considered: support before sale; price/cost; and support after sale. Advantages and disadvantages of each option and…

  7. CITY POLLUTION: THE CASE STUDY OF VENDORS AND ...

    African Journals Online (AJOL)

    User

    2017-12-15

    Dec 15, 2017 ... He noted that some beg holding a cup or plate in their hands ... Beggars and vendors have been accused of causing a number of conflicts in streets .... Since we sleep on street pavements, we empty bins in search of boxes, ...

  8. 7 CFR 4290.110 - Qualified management.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Qualified management. 4290.110 Section 4290.110... Qualifications for the RBIC Program Organizing A Rbic § 4290.110 Qualified management. An Applicant must show, to the satisfaction of the Secretary, that its current or proposed management team is qualified and has...

  9. Army Combat Medic Resilience: The Process of Forging Loyalty.

    Science.gov (United States)

    Abraham, Preetha A; Russell, Dale W; Huffman, Sarah; Deuster, Patricia; Gibbons, Susanne W

    2018-03-01

    This study presents a grounded theory analysis of in-depth interviews of United States Army Combat Medics (CMs) who had served in Iraq and/or Afghanistan. The study explores how 17 CMs nominated by their peers as resilient cope with military stressors in order to identify the factors that enable them to thrive amidst harsh conditions. Four distinct categories of characteristics unique to this group emerged: (1) social bonding, (2) readiness, (3) dual loyalty as performance, and (4) leader by example. Forging loyalty underpins these characteristics and represents the main process used by resilient CMs and comprised three behavior patterns: (1) commitment to the family, (2) commitment to the military mission, and (3) commitment to their guiding religious and spiritual beliefs. Prominent behavioral tendencies of forging loyalty likely developed during childhood and re-enforced by families, friends, and other role models. Based on the findings, new training and education efforts should focus on developing positive emotional, environmental, and social resources to enhance the health and well-being of service members and their families.

  10. Democratic Model of Public Policy Accountability. Case Study on Implementation of Street Vendors Empowerment Policy in Makassar City

    Directory of Open Access Journals (Sweden)

    Rulinawaty Kasmadsi

    2015-08-01

    Full Text Available Policy accountability is a form of manifestation of public officials responsible to the people. One form of policy accountability that is discussed here is street vendors policy accountability, because they are a group of citizens who have the economic activities in public spaces. The existence of this policy how-ever, the number of street vendors from year to year increase in Makassar City. Therefore, this study seeks to uncover and explain the democratic policy ac-countability through the street vendors’ responses and expectations to the implementation of street ven-dors empowerment policy in Makassar City; and to uncover and explain the democratic policy account-ability through the stakeholders’ responses and ex-pectations to the implementation of street vendors empowerment policy in Makassar City. To achieve these objectives, the study uses democracy theory, in which this theory focuses on togetherness in dis-cussing solutions to the various problems of street vendors and in the policy implementation as well.This study used a qualitative design and case studies strat-egy. Data collection techniques used was observa-tion, interview, and documentation. Data were ana-lyzed with case description its settings. The results of this study pointed out that the interests and needs of the street vendors are not met through the empow-erment policies vendors. This is caused by the ab-sence of accountability forum as a place of togeth-erness all of street vendors empowerment stakehold-ers’. Street vendors empowerment policy in Makassar City are designed base on a top-down approach, so they are considered as objects, which must accept all government programs aimed at them.

  11. Effects of boron additions and solutionizing treatments on microstructures and ductility of forged Ti–6Al–4V alloys

    International Nuclear Information System (INIS)

    Luan, J.H.; Jiao, Z.B.; Chen, G.; Liu, C.T.

    2015-01-01

    Highlights: • Proper boron additions and heat-treatments improve the ductility of Ti64 alloys. • Coarse TiB precipitates embrittle the Ti64 alloys causing ductility loss. • Modified Ti64 forged alloys with high strength and high ductility are developed. - Abstract: The effects of boron additions on the microstructure and mechanical properties of forged Ti–6Al–4V alloys in different heat-treatment conditions have been characterized by both experimental studies and thermodynamic calculations. The results indicate a combination of proper post-forging treatments and B additions are helpful for control of the prior-β grain size and the volume fraction of α phase, thereby tuning the ductility of the forged Ti–6Al–4V alloys. However, the B-containing alloys exhibit a significant drop in ductility if the solutionizing temperature is too high, and this embrittlement is mainly due to the coarsening of brittle TiB borides. The mechanism in this case is due to the cleavage fracture of TiB rather than its debonding with the matrix, as indicated by the observation of the aligned TiB borides on the matching areas of both halves of the fracture surfaces. Thus, the TiB size and orientation, the prior-β grain size, and the volume fraction of the α phase all play important roles in controlling the mechanical properties of the forged Ti–6Al–4V alloys. The current findings shed light on the composition–microstructure–ductility relationship in the forged Ti–6Al–4V alloys

  12. Effects of boron additions and solutionizing treatments on microstructures and ductility of forged Ti–6Al–4V alloys

    Energy Technology Data Exchange (ETDEWEB)

    Luan, J.H.; Jiao, Z.B. [Center for Advanced Structural Materials, Department of Mechanical and Biomedical Engineering, College of Science and Engineering, City University of Hong Kong, Hong Kong (China); Chen, G. [Engineering Research Center of Materials Behavior and Design, Ministry of Education, Nanjing University of Science and Technology, Nanjing 210094 (China); Liu, C.T., E-mail: chainliu@cityu.edu.hk [Center for Advanced Structural Materials, Department of Mechanical and Biomedical Engineering, College of Science and Engineering, City University of Hong Kong, Hong Kong (China)

    2015-03-05

    Highlights: • Proper boron additions and heat-treatments improve the ductility of Ti64 alloys. • Coarse TiB precipitates embrittle the Ti64 alloys causing ductility loss. • Modified Ti64 forged alloys with high strength and high ductility are developed. - Abstract: The effects of boron additions on the microstructure and mechanical properties of forged Ti–6Al–4V alloys in different heat-treatment conditions have been characterized by both experimental studies and thermodynamic calculations. The results indicate a combination of proper post-forging treatments and B additions are helpful for control of the prior-β grain size and the volume fraction of α phase, thereby tuning the ductility of the forged Ti–6Al–4V alloys. However, the B-containing alloys exhibit a significant drop in ductility if the solutionizing temperature is too high, and this embrittlement is mainly due to the coarsening of brittle TiB borides. The mechanism in this case is due to the cleavage fracture of TiB rather than its debonding with the matrix, as indicated by the observation of the aligned TiB borides on the matching areas of both halves of the fracture surfaces. Thus, the TiB size and orientation, the prior-β grain size, and the volume fraction of the α phase all play important roles in controlling the mechanical properties of the forged Ti–6Al–4V alloys. The current findings shed light on the composition–microstructure–ductility relationship in the forged Ti–6Al–4V alloys.

  13. The development of reactor vessel internal heavy forging for 1000 MW pressurized-water reactor nuclear power plant

    International Nuclear Information System (INIS)

    Zhang Zhifeng; Chen Yongbo; Ding Xiuping; Zhang Lingfang

    2012-01-01

    This Paper introduced the development of Reactor Vessel Internal (RVI) heavy forgings for 1000 MW Pressurized Water Reactor (PWR) nuclear power plant, analyzed the manufacture difficulties and technical countermeasures. The testing result of the product indicated that the performance of RVI heavy forgings manufactured by Shanghai Heavy Machinery Plant Ld. (SHMP) is outstanding and entirely satisfy the technical requirements for RVI product. (authors)

  14. Geographic and socioeconomic distribution of food vendors: a case study of a municipality in the Southern Brazil

    Directory of Open Access Journals (Sweden)

    Elizabeth Nappi Correa

    Full Text Available Abstract: The objective of this study was to identify the food vendor distribution profile of the city of Florianópolis, Santa Catarina State, Brazil, and investigate its association with the socioeconomic and demographic characteristics of different municipal regions. This descriptive, cross-sectional study obtained the location of food vendors from secondary data from different institutional sources. The density of different types of food vendors per 1,000 inhabitants in each municipal weighted area was calculated. The Kruskal-Wallis test compared the mean density of food vendors and the weighted income areas. The lowest-income regions had the lowest density of butchers, snack bars, supermarkets, bakeries/pastry shops, natural product stores, juice bars, and convenience stores. The identification of these areas may encourage the creation of public policies that facilitate healthy food startups and/or maintenance of healthy food vendors, especially in the lowest-income regions.

  15. Effect of technological parameters on formability of semi-solid rheological casting-forging 6061 alloy

    Directory of Open Access Journals (Sweden)

    Jianbo TAN

    2016-02-01

    Full Text Available The 6061 alloy cooling curve is determined by analysis software, and the 6061 semi-solid alloy is prepared by manual paddling process. The primary solid fraction is tested through prepared water quenched samples under different temperature. With H1F100 type servo press and cup type test mold, the forming of the 6061 semi-solid alloy rheological casting-forging is made. The influence of alloy temperature, forming pressure, upper mould temperature and holding time on the formability of 6061 alloy is researched. The results show that within the same set of mold completing casting and forging of the alloy is feasible. Along with the increase of the alloy temperature and the upper mould temperature, the formability of finished products becomes better. Under this experimentation, when the temperature of the semi-solid alloy is amongst 642 ℃ to 645 ℃ and the upper mould preheating temperature is amongst 200 ℃ to 300 ℃, casting defects such as cold insulation will form in the casting-forging sample of semi-solid 6061 alloy with the prolongation of holding time.

  16. Multipass forging of Inconel 718 in the delta-Supersolvus domain: assessing and modeling microstructure evolution

    Directory of Open Access Journals (Sweden)

    Zouari Meriem

    2014-01-01

    Full Text Available This work is focused on the evolution of the microstructure of Inconel 718 during multi-pass forging processes. During the forming process, the material is subjected to several physical phenomena such as work-hardening, recovery, recrystallization and grain growth. In this work, transformation kinetics are modeled in the δ-Supersolvus domain (T>Tsolvus where the alloy is single-phase, all the alloying elements being dissolved into the FCC matrix. Torsion tests were used to simulate the forging process and recrystallization kinetics was modeled using a discontinuous dynamic recrystallization (DDRX two-site mean field model. The microstructure evolution under hot forging conditions is predicted in both dynamic and post-dynamic regimes based on the initial distribution of grain size and the evolution of dislocation density distribution during each step of the process. The model predicts recrystallization kinetics, recrystallized grain size distribution and stress–strain curve for different thermo-mechanical conditions and makes the connection between dynamic and post-dynamic regimes.

  17. Effect of Friction on Barreling during cold Upset Forging of Aluminium 6082 Alloy Solid cylinders

    Science.gov (United States)

    Priyadarshini, Amrita; Kiran, C. P.; Suresh, K.

    2018-03-01

    Friction is one of the significant factors in forging operations since it affects metal flow in the die, forming load, strain distribution, tool and die life, surface quality of the product etc. In upset forging, the frictional forces at the die-workpiece interface oppose the outward flow of the material due to which the specimen develops a barrel shape. As a result, the deformation becomes non-uniform or inhomogeneous which is undesirable. Barreling can be reduced by applying effective lubricant on the surface of the platens. The objective of the present work is to study experimentally the effect of various frictional conditions (dry, grease, mineral oil) on barreling during upset forging of aluminum 6082 solid cylinders of different aspect ratio (length/diameter: 0.5, 0.75, 1). The friction coefficients are determined using the ring compression test. Curvature of barrel is determined based on the assumption that the curvature of the barrel follows the geometry of circular arc.

  18. Effects of HIP and forging on fracture behaviour in cast iron with spheroidal vanadium carbides dispersed within martensitic-matrix microstructure

    International Nuclear Information System (INIS)

    Uematsu, Y.; Tokaji, K.; Nishigaki, K.; Okajima, D.; Ogasawara, M.

    2010-01-01

    The cast iron with spheroidal vanadium carbides dispersed within martensitic-matrix microstructure was developed as a die material due to its high hardness. In order to achieve high performances of dies, not only the hardness but also the mechanical properties such as fracture toughness and fatigue crack propagation (FCP) resistance should be improved. In this paper, hot isostatic pressing (HIP) or forging was applied to the cast iron to improve mechanical properties, and the fracture behaviour, such as flexural strength, fracture toughness and FCP, was studied. The average flexural strength was reduced by forging because of the enhanced notch sensitivity due to the increase in the hardness. The fracture toughness was not affected by HIP nor forging while its scatter was significantly reduced by both post-treatments. The intrinsic FCP resistance taking account of crack closure was the same regardless of the application of HIP or forging, indicating that a slight change in the microstructure resulting from both treatments and the presence of casting defects exerted little influence on FCP behaviour. It could be concluded that both HIP and forging could improve the hardness of the material, while fracture toughness and FCP resistance were maintained.

  19. The Dynamic Environment of Crypto Markets: The Lifespan of New Psychoactive Substances (NPS) and Vendors Selling NPS.

    Science.gov (United States)

    Wadsworth, Elle; Drummond, Colin; Deluca, Paolo

    2018-03-16

    The Internet has played a major role in the distribution of New Psychoactive Substances (NPS), and crypto markets are increasingly used for the anonymous sale of drugs, including NPS. This study explores the availability of individual NPS and vendors on the crypto markets and considers whether crypto markets are a reliable platform for the sale of NPS. Data was collected from 22 crypto markets that were accessed through the hidden web using the Onion Router (Tor). Data collection took place bimonthly from October 2015 to October 2016 as part of the CASSANDRA ( C omputer A ssisted S olutions for S tudying the A vailability a N d D ist R ibution of novel psycho A ctive substances) project. In seven snapshots over 12 months, 808 unique vendors were found selling 256 unique NPS. The total number of individual NPS and vendors increased across the data collection period (increase of 93.6% and 71.6%, respectively). Only 24% ( n = 61) of the total number of NPS and 4% ( n = 31) of vendors appeared in every snapshot over the 12 months, whereas 21% ( n = 54) of NPS and 45% ( n = 365) of vendors only appeared once throughout the data collection. The individual NPS and vendors did not remain the same over the 12 months. However, the availability of NPS and vendors selling NPS grew. NPS consistently available on crypto markets could indicate popular substances.

  20. Outsourcing Maintenance Operations to Off-Shore Vendors: Some Lessons from the Field

    OpenAIRE

    Sam Ramanujan; Hal Lou

    1997-01-01

    Ever since Eastman Kodak announced that it was outsourcing its information systems (IS) function in 1988 to IBM, DEC and Businessland, large companies have found it acceptable to transfer their IS assets, leases and staff to third party vendors. In the recent past, there is a trend towards selective sourcing in which organizations opt to use third party vendors for certain IS functions which represent 20-60% of the IS budget while still retaining a substantial internal IS department. This pap...

  1. A multi-scale approach for high cycle anisotropic fatigue resistance: Application to forged components

    International Nuclear Information System (INIS)

    Milesi, M.; Chastel, Y.; Hachem, E.; Bernacki, M.; Loge, R.E.; Bouchard, P.O.

    2010-01-01

    Forged components exhibit good mechanical strength, particularly in terms of high cycle fatigue properties. This is due to the specific microstructure resulting from large plastic deformation as in a forging process. The goal of this study is to account for critical phenomena such as the anisotropy of the fatigue resistance in order to perform high cycle fatigue simulations on industrial forged components. Standard high cycle fatigue criteria usually give good results for isotropic behaviors but are not suitable for components with anisotropic features. The aim is to represent explicitly this anisotropy at a lower scale compared to the process scale and determined local coefficients needed to simulate a real case. We developed a multi-scale approach by considering the statistical morphology and mechanical characteristics of the microstructure to represent explicitly each element. From stochastic experimental data, realistic microstructures were reconstructed in order to perform high cycle fatigue simulations on it with different orientations. The meshing was improved by a local refinement of each interface and simulations were performed on each representative elementary volume. The local mechanical anisotropy is taken into account through the distribution of particles. Fatigue parameters identified at the microscale can then be used at the macroscale on the forged component. The linkage of these data and the process scale is the fiber vector and the deformation state, used to calculate global mechanical anisotropy. Numerical results reveal an expected behavior compared to experimental tendencies. We proved numerically the dependence of the anisotropy direction and the deformation state on the endurance limit evolution.

  2. Multi-vendor loyalty programs: influencing customer behavioral loyalty?

    Directory of Open Access Journals (Sweden)

    Teresa eVillacé-Molinero

    2016-02-01

    Full Text Available Loyalty programs are a consolidated marketing instrument whose adoption in many sectors has not been associated with appropriate comprehension of either their management elements or their effects. The purpose of this research is to contribute to knowledge about the effect of loyalty programs on repeat purchase behavior. More specifically, it seeks to see discover whether joining a program changes the buying behavior of its members, and, if so, to study the profile of those whose behavior changes most. The intention was also to provide new study variables pertaining to multi-vendor loyalty programs, such as where they are joined or purchases in associated outlets as a result of behavioral loyalty. Research was carried out using a sample of 1,200 individuals (31,746 purchases belonging to a multi-vendor loyalty program. The study period was 13 years, 4 months, and split into two phases: before and after the joining the program. Different methodological approaches, such as the use of transactional databases that included pre-program-enrollment data and of the same sampling units throughout the study, were incorporated into the research with the aim of advancing academic knowledge regarding multi-vendor loyalty programs. Moreover, a type of program and market hardly dealt with in the relevant literature was analyzed. The results showed while the loyalty program had managed to reduce the time between purchases, it had not affected purchase volume or average expenditure. They also demonstrated the existence of a differential profile of customers who had changed their buying behavior to a greater extent. Finally, recency was identified as being the decisive variable in behavioral change.

  3. Multi-Vendor Loyalty Programs: Influencing Customer Behavioral Loyalty?

    Science.gov (United States)

    Villacé-Molinero, Teresa; Reinares-Lara, Pedro; Reinares-Lara, Eva

    2016-01-01

    Loyalty programs are a consolidated marketing instrument whose adoption in many sectors has not been associated with appropriate comprehension of either their management elements or their effects. The purpose of this research is to contribute to knowledge about the effect of loyalty programs on repeat purchase behavior. More specifically, it seeks to discover whether joining a program changes the buying behavior of its members, and, if so, to study the profile of those whose behavior changes most. The intention was also to provide new study variables pertaining to multi-vendor loyalty programs, such as where they are joined or purchases in associated outlets as a result of behavioral loyalty. Research was carried out using a sample of 1200 individuals (31,746 purchases) belonging to a multi-vendor loyalty program. The study period was 13 years, 4 months, and split into two phases: before and after the joining the program. Different methodological approaches, such as the use of transactional databases that included pre-program-enrollment data and of the same sampling units throughout the study, were incorporated into the research with the aim of advancing academic knowledge regarding multi-vendor loyalty programs. Moreover, a type of program and market hardly dealt with in the relevant literature was analyzed. The results showed while the loyalty program had managed to reduce the time between purchases, it had not affected purchase volume or average expenditure. They also demonstrated the existence of a differential profile of customers who had changed their buying behavior to a greater extent. Finally, recency was identified as being the decisive variable in behavioral change.

  4. Multi-Vendor Loyalty Programs: Influencing Customer Behavioral Loyalty?

    Science.gov (United States)

    Villacé-Molinero, Teresa; Reinares-Lara, Pedro; Reinares-Lara, Eva

    2016-01-01

    Loyalty programs are a consolidated marketing instrument whose adoption in many sectors has not been associated with appropriate comprehension of either their management elements or their effects. The purpose of this research is to contribute to knowledge about the effect of loyalty programs on repeat purchase behavior. More specifically, it seeks to discover whether joining a program changes the buying behavior of its members, and, if so, to study the profile of those whose behavior changes most. The intention was also to provide new study variables pertaining to multi-vendor loyalty programs, such as where they are joined or purchases in associated outlets as a result of behavioral loyalty. Research was carried out using a sample of 1200 individuals (31,746 purchases) belonging to a multi-vendor loyalty program. The study period was 13 years, 4 months, and split into two phases: before and after the joining the program. Different methodological approaches, such as the use of transactional databases that included pre-program-enrollment data and of the same sampling units throughout the study, were incorporated into the research with the aim of advancing academic knowledge regarding multi-vendor loyalty programs. Moreover, a type of program and market hardly dealt with in the relevant literature was analyzed. The results showed while the loyalty program had managed to reduce the time between purchases, it had not affected purchase volume or average expenditure. They also demonstrated the existence of a differential profile of customers who had changed their buying behavior to a greater extent. Finally, recency was identified as being the decisive variable in behavioral change. PMID:26941677

  5. Environmentally Benign Lubricant Systems For Cold, Warm And Hot Forging

    DEFF Research Database (Denmark)

    Bay, Niels

    2010-01-01

    paper gives an overview of these efforts substituting environmentally hazardous lubricants in cold, warm and hot forging. The paper is an extract of the keynote paper [3] written by the author together with eight co-authors referring to collected papers and other information from more than 30 different...

  6. Tobacco Taxation, Smuggling, and Street Tobacco Vendors in Eritrea

    International Development Research Centre (IDRC) Digital Library (Canada)

    The bulk of the smuggled cigarettes are sold by street vendors, many of them women and children, ... and its implications for government revenue;; identify the reasons why people sell on the streets; and, ... Agent(e) responsable du CRDI.

  7. Tobacco Products Sold by Internet Vendors Following Restrictions on Flavors and Light Descriptors

    Science.gov (United States)

    Williams, Rebecca S.; Ribisl, Kurt M.

    2015-01-01

    Introduction: The 2009 Family Smoking Prevention and Tobacco Control Act bans characterizing flavors (e.g., grape, strawberry) in cigarettes, excluding tobacco and menthol, and prohibits companies from using misleading descriptors (e.g., light, low) that imply reduced health risks without submitting scientific data to support the claim and obtaining a marketing authorization from the U.S. Food and Drug Administration. This observational study examines tobacco products offered by Internet cigarette vendors (ICV) pre- and postimplementation of the ban on characterizing flavors in cigarettes and the restriction on misleading descriptors. Methods: Cross-sectional samples of the 200 most popular ICVs in 2009, 2010, and 2011 were identified. Data were analyzed in 2012 and 2013. Results: In 2011 the odds for selling cigarettes with banned flavors or misleading descriptors were 0.40 times that for selling the products in 2009 (95% confidence interval [CI] = 0.18, 0.88). However, 89% of vendors continued to sell the products, including 95.8% of international vendors. Following the ban on characterizing flavors, ICVs began selling potential alternative products. In 2010, the odds for selling flavored little cigars were 1.71 (95% CI = 1.09, 2.69) times that for selling the product in 2009 and, for clove cigars, were 5.50 (95% CI = 2.36, 12.80) times that for selling the product in 2009. Conclusions: Noncompliance with the ban on characterizing flavors and restriction on misleading descriptors has been high, especially among international vendors. Many vendors appear to be circumventing the intent of the flavors ban by selling unbanned flavored cigars, in some cases in lieu of flavored cigarettes. PMID:25173777

  8. Development of a forging technology for the production of high-pressure compressor blades from γ-titanium aluminide. Project C: production of primary wrought material for the forging of turbine blades from gamma-TiAl and their microstructural optimization. Final report

    International Nuclear Information System (INIS)

    Appel, F.; Oehring, M.; Lorenz, U.; Wagner, R.

    1999-01-01

    By the development of a new canning technique which resulted in an effective thermal isolation of can and billet the flow stress mismatch of can and billet material could be minimized, which allowed crack-free and uniform extrusion. Using this technique which has been applied for patent hot extrusion is an effective and matured working method for ingot material. It allows to produce fine-grained and almost fully recrystallized material with increased workability as has been found by the determination of the forging window as well as by the successful forging of more than 200 compressor blades by the project partner Thyssen Umformtechnik. By forging under suited conditions also a microstructural homogenization is achieved in comparison to extruded material. (orig.)

  9. Highly qualified in the Czech Republic

    Directory of Open Access Journals (Sweden)

    Renata Čuhlová

    2017-05-01

    Full Text Available The paper aims to analyse the current situation of the highly qualified in the Czech Republic applying the ISCO qualification. Previous studies suggest that educational attainment has an important impact on labour market performance and national competitiveness. Data analyses approved that highly qualified workforce positively influences economic situation of the EU–15 Member States they work in. However, this hypothesis was disapproved for the EU–10+3 Member States joining the EU after 2004. The difference can be explained by the various stage in convergence process since some New Member States are still in transformation period. We positively appraise the significant growth of fraction of the highly qualified in the Czech Republic since 2004, especially in the major group Professionals involving the most qualified workforce. The same trend happened also for the highly qualified foreigners in the Czech Republic, however their attracting still remains a challenge.

  10. A friction model for cold forging of aluminum, steel and stainless steel provided with conversion coating and solid film lubricant

    DEFF Research Database (Denmark)

    Bay, Niels; Eriksen, Morten; Tan, Xincai

    2011-01-01

    Adopting a simulative tribology test system for cold forging the friction stress for aluminum, steel and stainless steel provided with typical lubricants for cold forging has been determined for varying normal pressure, surface expansion, sliding length and tool/work piece interface temperature...

  11. Developments of New Lubricants for Cold Forging of Stainless Steel

    DEFF Research Database (Denmark)

    Steenberg, Thomas; Christensen, Erik; Olesen, P.

    1997-01-01

    Two new lubricant systems for cold forging of stainless steel have been developed. The main component of these systems are FeCl3 and ZnCa2(PO4)2, respectively. Both lubricant systems have been tested using a backward extrusion test. The results show excellent lubricating properties with respect...

  12. The optimal replenishment policy for time-varying stochastic demand under vendor managed inventory

    DEFF Research Database (Denmark)

    Govindan, Kannan

    2015-01-01

    A Vendor Managed Inventory (VMI) partnership places the responsibility on the vendor (rather than on buyers) to schedule purchase orders for inventory replenishment in the supply chain system. In this research, the supply chain network considers the Silver-Meal heuristic with an augmentation...... quantity replenishment policy between both traditional and VMI systems. We consider time-varying stochastic demand in two-echelon (one vendor, multiple retailers) supply chains. This paper seeks to find the supply chain that minimizes system cost through comparing performance between traditional and VMI...... systems. A mathematical model is developed, and total supply chain cost is used as the measure of comparison. The models are applied in both traditional and VMI supply chains based on pharmaceutical industry data, and we focus on total cost difference compared through the use of Adjusted Silver-Meal (ASM...

  13. Ageing of forged superaustenitic stainless steel: Precipitate phases and mechanical properties

    Energy Technology Data Exchange (ETDEWEB)

    Anburaj, J., E-mail: janburaj@gmail.com [Department of Metallurgical Engineering, PSG College of Technology, Coimbatore 641 004 (India); Nazirudeen, S.S. Mohamed; Narayanan, R.; Anandavel, B.; Chandrasekar, A. [Department of Metallurgical Engineering, PSG College of Technology, Coimbatore 641 004 (India)

    2012-02-15

    Highlights: Black-Right-Pointing-Pointer Solutionizing of 1250 Degree-Sign C and ageing of 500-1000 Degree-Sign C was done for hot forged SASS. Black-Right-Pointing-Pointer Strength and toughness increased by 25% on hot forged than the cast SASS. Black-Right-Pointing-Pointer Amounts of precipitates after ageing were evaluated by thermo-calc. Black-Right-Pointing-Pointer Sigma forms from chi at 900 Degree-Sign C and contains constant Cr and Mo contents, unlike chi. Black-Right-Pointing-Pointer Sigma is incoherent, contains high Mo and causes low toughness at 900 Degree-Sign C. - Abstract: Cast superaustenitic stainless steel (SASS), of composition 19 wt% Cr, 20 wt% Ni, 7.5 wt% Mo and 0.37 wt% N, is hot forged at 1200 Degree-Sign C. The forging was then solutionized at 1250 Degree-Sign C and aged for 1 h and 10 h at different temperatures in the range of 500-1000 Degree-Sign C. Effect of these treatments on (i) hardness and (ii) fracture toughness based on impact energy is reported. Chi is formed from low temperatures up to 800 Degree-Sign C, and sigma at temperatures above 900 Degree-Sign C. A model is proposed to illustrate the dissolution of chi and sigma in austenite at elevated temperatures. Compared with chi, sigma contains more Mo. Toughness decreased with increasing amounts of chi and sigma precipitates. However, in the temperature range of 850-950 Degree-Sign C, low toughness was observed for relatively a short ageing time, although virtually the volume of sigma phase is very low. This is attributed to the presence of incoherent sigma in austenite matrix. Fractographs of the impact-tested samples indicated an increased tendency for brittle fracture with increasing ageing temperatures (increase in sigma content). Thermodynamic calculations substantiated (i) EDS results of composition of secondary phases present in the aged SASS and (ii) the proposed model. From these studies it is concluded that sigma is enriched in Mo at 900 Degree-Sign C and can be as

  14. Tensile properties of a dual-axial forged Ti–Fe–Cu alloy containing boron

    Energy Technology Data Exchange (ETDEWEB)

    Zadorozhnyy, V.Yu., E-mail: zadorozhnyyvlad@gmail.com [National University of Science and Technology “MISIS”, Leninsky prospect, 4, Moscow 119049 (Russian Federation); Institute for Materials Research, Tohoku University, Katahira 2-1-1, Aoba-Ku, Sendai 980-8577 (Japan); Shchetinin, I.V.; Chirikov, N.V. [National University of Science and Technology “MISIS”, Leninsky prospect, 4, Moscow 119049 (Russian Federation); Louzguine-Luzgin, D.V. [WPI Advanced Institute for Materials Research, Tohoku University, Katahira 2-1-1, Aoba-Ku, Sendai 980-8577 (Japan)

    2014-09-22

    In the present work we introduce a micro/nano-structured α+β Ti-based low-alloy produced by the tilt-casting method and subjected to subsequent thermo-mechanical treatment. After hot dual-axial forging at 900 °C, subsequent heating at 700 °C and water quenching a Ti{sub 94}Fe{sub 3}Cu{sub 3}+1000 ppm of boron alloy, containing inexpensive alloying elements, showed an ultimate tensile strength value of about 950 MPa and percentage elongation of about 5.2%. It is shown that the intensive forging treatment and subsequent heat treatment are leading to significantly improved mechanical properties of such an alloy compared to the as-cast state.

  15. Buyer-vendor coordination for fixed lifetime product with quantity discount under finite production rate

    Science.gov (United States)

    Zhang, Qinghong; Luo, Jianwen; Duan, Yongrui

    2016-03-01

    Buyer-vendor coordination has been widely addressed; however, the fixed lifetime of the product is seldom considered. In this paper, we study the coordination of an integrated production-inventory system with quantity discount for a fixed lifetime product under finite production rate and deterministic demand. We first derive the buyer's ordering policy and the vendor's production batch size in decentralised and centralised systems. We then compare the two systems and show the non-coordination of the ordering policies and the production batch sizes. To improve the supply chain efficiency, we propose quantity discount contract and prove that the contract can coordinate the buyer-vendor supply chain. Finally, we present analytically tractable solutions and give a numerical example to illustrate the benefits of the proposed quantity discount strategy.

  16. 26 CFR 1.30-1 - Definition of qualified electric vehicle and recapture of credit for qualified electric vehicle.

    Science.gov (United States)

    2010-04-01

    ... qualified electric vehicle. A qualified electric vehicle is a motor vehicle that meets the requirements of section 30(c). Accordingly, a qualified electric vehicle does not include any motor vehicle that has ever been used (for either personal or business use) as a non-electric vehicle. (b) Recapture of credit for...

  17. Qualification of laser based additive production for manufacturing of forging Tools

    Directory of Open Access Journals (Sweden)

    Junker Daniel

    2015-01-01

    Full Text Available Mass customization leads to very short product life cycles, so the costs of a tool have to be amortized with a low number of workpieces. Especially for highly loaded tools, like those for forging, that leads to expensive products. Therefore more economical production processes for tool manufacturing have to be investigated. As laser additive manufacturing is already used for the production of moulds for injection moulding, this technology maybe could also improve the forging tool production. Within this paper laser metal deposition, which is industrially used for tool repair, will be investigated for the use in tool manufacturing. Therefore a mechanical characterization of parts built with different laser process parameters out of the hot work tool steel 1.2709 is made by upsetting tests and hardness measurements. So the influence of the additive manufacturing process on the hardness distribution is analysed.

  18. The coarsening effect of SA508-3 steel used as heavy forgings material

    Directory of Open Access Journals (Sweden)

    Dingqian Dong

    2015-01-01

    Full Text Available SA508Gr.3 steel is popularly used to produce core unit of nuclear power reactors due to its outstanding ability of anti-neutron irradiation and good fracture toughness. The forging process takes important role in manufacturing to refine the grain size and improve the material properties. But due to their huge size, heavy forgings cannot be cooled down quickly, and the refined grains usually have long time to grow in high temperature conditions. If the forging process is not adequately scheduled or implemented, very large grains up to millimetres in size may be found in this steel and cannot be eliminated in the subsequent heat treatment. To fix the condition which may causes the coarsening of the steel, hot upsetting experiments in the industrial production environment were performed under different working conditions and the corresponding grain sizes were measured and analysed. The observation showed that the grain will abnormally grow if the deformation is less than a critical value. The strain energy takes a critical role in the grain evolution. If dynamic recrystallization consumes the strain energy as much as possible, the normal grains will be obtained. While if not, the stored strain energy will promote abnormal growth of the grains.

  19. 11 CFR 9002.11 - Qualified campaign expense.

    Science.gov (United States)

    2010-01-01

    ... 11 Federal Elections 1 2010-01-01 2010-01-01 false Qualified campaign expense. 9002.11 Section 9002.11 Federal Elections FEDERAL ELECTION COMMISSION PRESIDENTIAL ELECTION CAMPAIGN FUND: GENERAL ELECTION FINANCING DEFINITIONS § 9002.11 Qualified campaign expense. (a) Qualified campaign expense means...

  20. 11 CFR 9032.9 - Qualified campaign expense.

    Science.gov (United States)

    2010-01-01

    ... 11 Federal Elections 1 2010-01-01 2010-01-01 false Qualified campaign expense. 9032.9 Section 9032.9 Federal Elections FEDERAL ELECTION COMMISSION PRESIDENTIAL ELECTION CAMPAIGN FUND: PRESIDENTIAL PRIMARY MATCHING FUND DEFINITIONS § 9032.9 Qualified campaign expense. (a) Qualified campaign expense...

  1. The Fabrication of Qualified Citizens

    DEFF Research Database (Denmark)

    Andrade-Molina, Melissa

    2017-01-01

    a rhizomatic analytical move, a historization of the present is deployed to map the fabrication of the desired qualified citizen in Chile. The analysis evidences the (re)production of dominant narratives about the “qualified citizen” are and have been entangled with the functioning of school geometry...

  2. What's in Your Techno-Future? Vendors Share Their Views.

    Science.gov (United States)

    Gerber, Carole

    1995-01-01

    Examines vendors' views on the future of CD-ROM technology. Topics include the library role, single point access, costs, tape backup, user-friendly library automation systems and databases, improved quality, the growth of Internet access, and perspectives on technology in schools. (AEF)

  3. Coordinated clinical and financial analysis as a powerful tool to influence vendor pricing.

    Science.gov (United States)

    Logan, Catherine A; Wu, Roger Y; Mulley, Debra; Smith, Paul C; Schwaitzberg, Steven D

    2010-01-01

    As costs continue to outpace reimbursements, hospital administrators and clinicians face increasing pressure to justify new capital purchases. Massachusetts Health Care Reform has added further economic challenges for Disproportionate Share Hospitals (DSH), as resources formerly available to treat the uninsured have been redirected. In this challenging climate, many hospitals still lack a standardized process for technology planning and/or vendor negotiation. : The purpose of this study was to determine whether a simple, coordinated clinical and financial analysis of a technology, Endoscopic Carpal Tunnel Release (ECTR), is sufficient to impact vendor pricing at Cambridge Health Alliance (CHA), a disproportionate share hospital (DSH) in Cambridge, Massachusetts. This case study addressed the topic of technology adoption, a complex decision-making process every hospital administration faces. Taking note of other hospitals approaches to instill a strategic management culture, CHA combined a literature review on clinical outcomes and financial analysis on profitability. Clinical effectiveness was evaluated through a literature review. The financial analysis was based on a retrospective inquiry of fixed and variable costs, reimbursement rates, actual payer mix, and profitability of adopting ECTR over open carpal tunnel release at CHA. This clinical and financial analysis was then shared with the vendor. A literature review revealed that although there are short-term benefits to ECTR, there is little to no difference in long-term outcomes to justify a calculated incremental loss of $91.49 in revenue per case. Sharing this analysis with the vendor resulted in a 30% price reduction. A revised cost analysis demonstrated a $53.51 incremental gain in revenue per case. CHA has since elected to offer ECTR to its patients. Smaller hospital systems often have modest leverage in vendor negotiations. Our results suggest that the development of adoption criteria and an evidence

  4. Repetitive forging (RF) using inclined punches as a new bulk severe plastic deformation method

    Energy Technology Data Exchange (ETDEWEB)

    Babaei, A. [Department of Mechanical Engineering, University College of Engineering, University of Tehran, Tehran 11155-4563 (Iran, Islamic Republic of); Faraji, G., E-mail: ghfaraji@ut.ac.ir [Department of Mechanical Engineering, University College of Engineering, University of Tehran, Tehran 11155-4563 (Iran, Islamic Republic of); Department of Engineering Design and Manufacture, University of Malaya, 50603 Kuala Lumpur (Malaysia); Mashhadi, M.M. [Department of Mechanical Engineering, University College of Engineering, University of Tehran, Tehran 11155-4563 (Iran, Islamic Republic of); Hamdi, M. [Department of Engineering Design and Manufacture, University of Malaya, 50603 Kuala Lumpur (Malaysia)

    2012-12-15

    A new bulk severe plastic deformation method based on repetitive forging (RF) using inclined punches is proposed. This process consists of two half cycles. In the first half cycle, a square cross section deforms to parallelogram by forging with two inclined punches, and the parallelogram cross section is forged back to square using two flat punches in the second half cycle. This method was applied to commercially pure copper and significant grain refinement was achieved after four passes of RF. The results showed that significant improvement in the mechanical properties was obtained. Notable increase of yield and ultimate strengths corresponding to 358 MPa and 381 MPa after four passes of RF from the initial values of 121 MPa and 230.5 MPa is detectable. Microhardness increases to about 100 Hv after four passes of RF from the initial value of 53 Hv. Finite element (FE) results illustrate that RF is able to impose extremely high plastic strains to the materials. In the RF process, the processed samples have the same dimensions and geometry as those of the initial sample without any waste material and there is no need for back pressure.

  5. Wear Improvement of Tools in the Cold Forging Process for Long Hex Flange Nuts.

    Science.gov (United States)

    Hsia, Shao-Yi; Shih, Po-Yueh

    2015-09-25

    Cold forging has played a critical role in fasteners and has been widely used in automotive production, manufacturing, aviation and 3C (Computer, Communication, and Consumer electronics). Despite its extensive use in fastener forming and die design, operator experience and trial and error make it subjective and unreliable owing to the difficulty of controlling the development schedule. This study used finite element analysis to establish and simulate wear in automotive repair fastener manufacturing dies based on actual process conditions. The places on a die that wore most quickly were forecast, with the stress levels obtained being substituted into the Archard equation to calculate die wear. A 19.87% improvement in wear optimization occurred by applying the Taguchi quality method to the new design. Additionally, a comparison of actual manufacturing data to simulations revealed a nut forging size error within 2%, thereby demonstrating the accuracy of this theoretical analysis. Finally, SEM micrographs of the worn surfaces on the upper punch indicate that the primary wear mechanism on the cold forging die for long hex flange nuts was adhesive wear. The results can simplify the development schedule, reduce the number of trials and further enhance production quality and die life.

  6. Anisotropy effects during dwell-fatigue caused by δ-phase orientation in forged Inconel 718

    Energy Technology Data Exchange (ETDEWEB)

    Saarimäki, Jonas, E-mail: jonas.saarimaki@liu.se [Division of Engineering Materials, Department of Management and Engineering, Linköping University, SE-58183 Linköping (Sweden); Colliander, Magnus Hörnqvist [Department of Applied Physics, Chalmers University of Technology, SE-41296 Göteborg (Sweden); GKN Aerospace Engine Systems, R& T Centre, SE-46181 Trollhättan (Sweden); Moverare, Johan J. [Division of Engineering Materials, Department of Management and Engineering, Linköping University, SE-58183 Linköping (Sweden)

    2017-04-24

    Inconel 718 is a commonly used superalloy for turbine discs in the gas turbine industry. Turbine discs are often subjected to dwell-fatigue as a result of long constant load cycles. The effect of anisotropy on dwell-fatigue cracking in forged turbine discs have not yet been thoroughly investigated. Crack propagation behaviour was characterised using compact tension (CT) samples cut in different orientations from a real turbine disc forging. Samples were also cut in two different thicknesses in order to investigate the influence of plane strain and plane stress condition on the crack propagation rates. The samples were subjected to dwell-fatigue tests at 550 °C with 90 s or 2160 s dwell-times at maximum load. Microstructure characterisation was done using scanning electron microscopy (SEM) techniques such as electron channelling contrast imaging (ECCI), electron backscatter diffraction (EBSD), and light optical microscopy (LOM). The forged alloy exhibits strong anisotropic behaviour caused by the non-random δ-phase orientation. When δ-phases were oriented perpendicular compared to parallel to the loading direction, the crack growth rates were approximately ten times faster. Crack growth occurred preferably in the interface between the γ-matrix and the δ-phase.

  7. 76 FR 8773 - Forged Stainless Steel Flanges From India and Taiwan

    Science.gov (United States)

    2011-02-15

    ... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 731-TA-639 and 640 (Third Review)] Forged Stainless Steel Flanges From India and Taiwan AGENCY: United States International Trade Commission. ACTION... Taiwan would be likely to lead to continuation or recurrence of material injury. On January 31, 2011, the...

  8. A Probabilistic Analysis of the Nxt Forging Algorithm

    Directory of Open Access Journals (Sweden)

    Serguei Popov

    2016-12-01

    Full Text Available We discuss the forging algorithm of Nxt from a probabilistic point of view, and obtain explicit formulas and estimates for several important quantities, such as the probability that an account generates a block, the length of the longest sequence of consecutive blocks generated by one account, and the probability that one concurrent blockchain wins over an- other one. Also, we discuss some attack vectors related to splitting an account into many smaller ones.

  9. Tobacco products sold by Internet vendors following restrictions on flavors and light descriptors.

    Science.gov (United States)

    Jo, Catherine L; Williams, Rebecca S; Ribisl, Kurt M

    2015-03-01

    The 2009 Family Smoking Prevention and Tobacco Control Act bans characterizing flavors (e.g., grape, strawberry) in cigarettes, excluding tobacco and menthol, and prohibits companies from using misleading descriptors (e.g., light, low) that imply reduced health risks without submitting scientific data to support the claim and obtaining a marketing authorization from the U.S. Food and Drug Administration. This observational study examines tobacco products offered by Internet cigarette vendors (ICV) pre- and postimplementation of the ban on characterizing flavors in cigarettes and the restriction on misleading descriptors. Cross-sectional samples of the 200 most popular ICVs in 2009, 2010, and 2011 were identified. Data were analyzed in 2012 and 2013. In 2011 the odds for selling cigarettes with banned flavors or misleading descriptors were 0.40 times that for selling the products in 2009 (95% confidence interval [CI] = 0.18, 0.88). However, 89% of vendors continued to sell the products, including 95.8% of international vendors. Following the ban on characterizing flavors, ICVs began selling potential alternative products. In 2010, the odds for selling flavored little cigars were 1.71 (95% CI = 1.09, 2.69) times that for selling the product in 2009 and, for clove cigars, were 5.50 (95% CI = 2.36, 12.80) times that for selling the product in 2009. Noncompliance with the ban on characterizing flavors and restriction on misleading descriptors has been high, especially among international vendors. Many vendors appear to be circumventing the intent of the flavors ban by selling unbanned flavored cigars, in some cases in lieu of flavored cigarettes. © The Author 2014. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  10. Forging of cast Mg-3Sn-2Ca-0.4Al-0.4Si magnesium alloy using processing map

    International Nuclear Information System (INIS)

    Rao, K. P.; Suresh, K.; Prasad, Y. V. R. K.; Hort, N.; Kainer, K. U.

    2016-01-01

    Mg-3Sn-2Ca (TX32) alloy has good creep resistance but limited workability. Minor amounts of Al and Si have been added to TX32 for improving its hot workability. The processing map for the TX32-0.4Al-0.4Si alloy exhibited two workability domains in the temperature and strain rate ranges: (1) 310-415.deg.C/0.0003-0.003 s-1 and (2) 430-500.deg.C/0.003-3 s-1. The alloy exhibited flow instability at temperatures < 350.deg.C at strain rates > 0.01 s-1. The alloy has been forged to produce a cup shape component to validate these findings of processing map. Finite-element (FE) simulation has been performed for obtaining the local variations of strain and strain rate within the forging. The microstructures of the forged components under the optimal domain conditions revealed dynamically recrystallized grains, and those forged in the flow instability regime have fractured and exhibited flow localization bands and cracks. The experimental load stroke curves correlated well with those obtained by FE simulation.

  11. Forging of cast Mg-3Sn-2Ca-0.4Al-0.4Si magnesium alloy using processing map

    Energy Technology Data Exchange (ETDEWEB)

    Rao, K. P.; Suresh, K.; Prasad, Y. V. R. K. [University of Hong Kong, Hong Kong (China); Hort, N.; Kainer, K. U. [Magnesium Innovation Centre, Geesthacht (Germany)

    2016-06-15

    Mg-3Sn-2Ca (TX32) alloy has good creep resistance but limited workability. Minor amounts of Al and Si have been added to TX32 for improving its hot workability. The processing map for the TX32-0.4Al-0.4Si alloy exhibited two workability domains in the temperature and strain rate ranges: (1) 310-415.deg.C/0.0003-0.003 s-1 and (2) 430-500.deg.C/0.003-3 s-1. The alloy exhibited flow instability at temperatures < 350.deg.C at strain rates > 0.01 s-1. The alloy has been forged to produce a cup shape component to validate these findings of processing map. Finite-element (FE) simulation has been performed for obtaining the local variations of strain and strain rate within the forging. The microstructures of the forged components under the optimal domain conditions revealed dynamically recrystallized grains, and those forged in the flow instability regime have fractured and exhibited flow localization bands and cracks. The experimental load stroke curves correlated well with those obtained by FE simulation.

  12. The Simulation and Analysis of the Closed Die Hot Forging Process by A Computer Simulation Method

    Directory of Open Access Journals (Sweden)

    Dipakkumar Gohil

    2012-06-01

    Full Text Available The objective of this research work is to study the variation of various parameters such as stress, strain, temperature, force, etc. during the closed die hot forging process. A computer simulation modeling approach has been adopted to transform the theoretical aspects in to a computer algorithm which would be used to simulate and analyze the closed die hot forging process. For the purpose of process study, the entire deformation process has been divided in to finite number of steps appropriately and then the output values have been computed at each deformation step. The results of simulation have been graphically represented and suitable corrective measures are also recommended, if the simulation results do not agree with the theoretical values. This computer simulation approach would significantly improve the productivity and reduce the energy consumption of the overall process for the components which are manufactured by the closed die forging process and contribute towards the efforts in reducing the global warming.

  13. Forging Consensus for Implementing Youth Socialization Policy in Northwest China

    Science.gov (United States)

    Fairbrother, Gregory P.

    2011-01-01

    The goal of this article is to examine how the provincial education media in China play a role of forging consensus among local actors responsible for the implementation of new centrally-promulgated youth socialization policy. In doing so, it also explores the tension among three of the Chinese state's claims to legitimacy: economic development,…

  14. Internet little cigar and cigarillo vendors: Surveillance of sales and marketing practices via website content analysis.

    Science.gov (United States)

    Williams, Rebecca S; Derrick, Jason C

    2018-04-01

    Cigar sales have nearly doubled as cigarette sales have dropped, and large cigars have been replaced by little cigars and cigarillos (LCCs). Many LCCs are flavored, are perceived as less harmful than cigarettes, and have become increasingly available from e-commerce sources. We conducted surveillance of the online retail environment in 2013 and 2014 for LCCs in order to describe characteristics of Internet tobacco vendors selling LCCs and their sales and marketing practices, youth access practices, and their practices in relation to cigarette and other tobacco product sales. In 2013, we identified and manually screened 32,446 websites, yielding 500 unique Internet LCC vendors. In 2014, we identified 511 vendors selling LCCs from a list of 31,239 manually screened websites. We then selected 249 in 2013 and 263 in 2014 for content analysis focusing on six domains including demographics, youth access, payment and delivery, products for sale, promotions and claims, and prices. Just over half of vendors in both years were located solely in the U.S. with 70.1% of those selling flavored LCCs in 2013 and 76.1% in 2014. Nearly half only used proven ineffective age verification strategies and another 10% made no attempts to verify age at all. Most vendors accepted credit cards and advertised using the United States Postal Service. Half of vendors featured a variety of health warnings and most featured promotions. Federal bans on flavored cigarettes and restrictions on age verification, payment, and shipping for Internet tobacco sales should be extended to include LCCs. Copyright © 2018 Elsevier Inc. All rights reserved.

  15. Large forging manufacturing process

    Science.gov (United States)

    Thamboo, Samuel V.; Yang, Ling

    2002-01-01

    A process for forging large components of Alloy 718 material so that the components do not exhibit abnormal grain growth includes the steps of: a) providing a billet with an average grain size between ASTM 0 and ASTM 3; b) heating the billet to a temperature of between 1750.degree. F. and 1800.degree. F.; c) upsetting the billet to obtain a component part with a minimum strain of 0.125 in at least selected areas of the part; d) reheating the component part to a temperature between 1750.degree. F. and 1800.degree. F.; e) upsetting the component part to a final configuration such that said selected areas receive no strains between 0.01 and 0.125; f) solution treating the component part at a temperature of between 1725.degree. F. and 1750.degree. F.; and g) aging the component part over predetermined times at different temperatures. A modified process achieves abnormal grain growth in selected areas of a component where desirable.

  16. Fatigue properties of high-strength materials used in cold-forging tools

    DEFF Research Database (Denmark)

    Brøndsted, P.; Skov-Hansen, P.

    1998-01-01

    In the present work classical analytical models are used to describe the static stress–strain curves, low-cycle fatigue properties and fatigue crack growth behaviour of high-strength materials for use in tools for metal-forming processes such as cold forging and extrusion. The paper describes the...

  17. Developments of steel fabrication processes for castings and ingots for forgings

    International Nuclear Information System (INIS)

    Fernandez, S.

    1980-01-01

    This chapter deals with a series of technological developments in the manufacture of steels which have occurred during the last years, in particular reporting the results obtained in Reinosa with some of these methods in the fabrication of castings as well as forgings and rolled products. (author)

  18. 75 FR 67110 - Forged Stainless Steel Flanges From India and Taiwan

    Science.gov (United States)

    2010-11-01

    ... Stainless Steel Flanges From India and Taiwan AGENCY: United States International Trade Commission. ACTION... India and Taiwan. SUMMARY: The Commission hereby gives notice that it has instituted reviews pursuant to... the antidumping duty orders on forged stainless steel flanges from India and Taiwan would be likely to...

  19. X-ray tomography studies on porosity and particle size distribution in cast in-situ Al-Cu-TiB{sub 2} semi-solid forged composites

    Energy Technology Data Exchange (ETDEWEB)

    Mathew, James; Mandal, Animesh [School of Minerals, Metallurgical and Materials Engineering, Indian Institute of Technology, Bhubaneswar (India); Warnett, Jason; Williams, Mark A. [WMG, University of Warwick, Coventry CV4 7AL (United Kingdom); Chakraborty, Madhusudan [Department of Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur (India); Srirangam, Prakash, E-mail: p.srirangam@warwick.ac.uk [WMG, University of Warwick, Coventry CV4 7AL (United Kingdom)

    2016-08-15

    X-ray computed tomography (XCT) was used to characterise the internal microstructure and clustering behaviour of TiB{sub 2} particles in in-situ processed Al-Cu metal matrix composites prepared by casting method. Forging was used in semi-solid state to reduce the porosity and to uniformly disperse TiB{sub 2} particles in the composite. Quantification of porosity and clustering of TiB{sub 2} particles was evaluated for different forging reductions (30% and 50% reductions) and compared with an as-cast sample using XCT. Results show that the porosity content was decreased by about 40% due to semi-solid forging as compared to the as-cast condition. Further, XCT results show that the 30% forging reduction resulted in greater uniformity in distribution of TiB{sub 2} particles within the composite compared to as-cast and the 50% forge reduction in semi-solid state. These results show that the application of forging in semi-solid state enhances particle distribution and reduces porosity formation in cast in-situ Al-Cu-TiB{sub 2} metal matrix composites. - Highlights: •XCT was used to visualise 3D internal structure of Al-Cu-TiB{sub 2} MMCs. •Al-Cu-TiB{sub 2} MMC was prepared by casting using flux assisted synthesis method. •TiB{sub 2} particles and porosity size distribution were evaluated. •Results show that forging in semi-solid condition decreases the porosity content and improve the particle dispersion in MMCs.

  20. Medium carbon vanadium steels for closed die forging; Acos de medio carbono microligados ao vanadio para forjaria em matriz fechada

    Energy Technology Data Exchange (ETDEWEB)

    Jeszensky, Gabor; Plaut, Ronald Lesley

    1994-12-31

    This work analyses the medium carbon micro alloyed vanadium potential for closed die forged production. The steels reach the mechanical resistance requests during cooling after forging, eliminating the subsequent thermal treatment. Those steels also present good fatigue resistance and machinability. The industrial scale experiments are also reported 16 refs., 21 figs.

  1. A coupled thermo-mechanical pseudo inverse approach for preform design in forging

    Science.gov (United States)

    Thomas, Anoop Ebey; Abbes, Boussad; Li, Yu Ming; Abbes, Fazilay; Guo, Ying-Qiao; Duval, Jean-Louis

    2017-10-01

    Hot forging is a process used to form difficult to form materials as well as to achieve complex geometries. This is possible due to the reduction of yield stress at high temperatures and a subsequent increase in formability. Numerical methods have been used to predict the material yield and the stress/strain states of the final product. Pseudo Inverse Approach (PIA) developed in the context of cold forming provides a quick estimate of the stress and strain fields in the final product for a given initial shape. In this paper, PIA is extended to include the thermal effects on the forging process. A Johnson-Cook thermo-viscoplastic material law is considered and a staggered scheme is employed for the coupling between the mechanical and thermal problems. The results are compared with available commercial codes to show the efficiency and the limitations of PIA.

  2. 21 CFR 516.141 - Qualified expert panels.

    Science.gov (United States)

    2010-04-01

    ... choose members for the qualified expert panel in accordance with selection criteria listed in paragraph... whether the proposed qualified expert panel meets the selection criteria prior to the panel beginning its... Committee Act, as amended, 5 U.S.C. App. (b) Criteria for the selection of a qualified expert panel. (1) A...

  3. The role of water vendors in water service delivery in developing countries: a case of Dala local government, Kano, Nigeria

    Science.gov (United States)

    Ahmad, Muhammad Tajuri

    2017-06-01

    In Nigeria, more than 60 million people are required to meet Millennium Development Goals (MDGs) target for improved water by 2015 and is unlikely to be achieved only by public supply. To cover these water availability gaps water vendors exist and ignoring their role is potentially deceptive. The aim of this paper is to assess the role of water vendors in meeting these peoples' need and elicit household's willingness-to-pay for improved supply. The research includes cross-sectional mixed method in which questionnaire survey was performed to 218 households; and interviews and focus group discussion were conducted with water vendors. Findings reveal that water vendors supplied most households irrespective of season. Retail vendors buy 25 l at ₦4.00 (0.013) from wholesale vendors and resale at ₦20.08 (0.07) during dry and at ₦14.02 (0.05) in wet season. The price is 28 and 40 times the cost of in-house connection from Kano State Water Board (KNSWB) during rainy and dry season, respectively. Vendors who buy from hand-dug wells pay ₦100.00 (0.33) per day and draw as much water within that day. Furthermore, willingness-to-pay for in-house connection was elicited as ₦367.00 (1.20), lower than monthly flat fixed tariff set by KNSWB. The study recommends recognizing vendors formally in form of public private partnership so that technical and financial support be given, thus their activities and charges be regulated. People's perception on water should be changed through education and enlightening. Further research should focus on estimating total volume of water supplied by water vendors.

  4. 48 CFR 804.1102 - Vendor Information Pages (VIP) Database.

    Science.gov (United States)

    2010-10-01

    ... (VIP) Database. 804.1102 Section 804.1102 Federal Acquisition Regulations System DEPARTMENT OF VETERANS AFFAIRS GENERAL ADMINISTRATIVE MATTERS Contract Execution 804.1102 Vendor Information Pages (VIP) Database. Prior to January 1, 2012, all VOSBs and SDVOSBs must be listed in the VIP database, available at http...

  5. A study of VHI scores and acoustic features in street vendors as occupational voice users.

    Science.gov (United States)

    Natour, Yaser S; Darawsheh, Wesam B; Bashiti, Sara; Wari, Majd; Taha, Juhayna; Odeh, Thair

    to investigate acoustic features of phonation and perception of voice handicap in street vendors. Eighty-eight participants (44 street vendors, 44 controls) were recruited. The mean age of the group was 38.9±16.0 years (range: 20-78 years). Scores of the Arabic version of the Voice Handicap Index (VHI-Arab) were used for analysis. Acoustic measures of fundamental frequency (F 0 ), jitter, shimmer, and signal-to-noise ratio (SNR) were also analyzed. Analysis showed a significant difference between street vendors and controls in the total score of the VHI-Arab (p<0.001) as well as scores of all three VHI-Arab subsections: functional (p<0.001), physical (p<0.001), and emotional (p=0.025). Weak correlations were found among all of the VHI scores and acoustic measures (-0.219≤ r≤0.355), except for SNR where a moderate negative correlations were found (r=-0.555; -0.4) between the VHI (physical and total) scores and SNR values. Significant differences also were found in F 0 , jitter, and SNR among specific subgroups of street vendors when stratified by weekly hours worked (p<0.05), and in jitter (p=0.39) when stratified by educational level. Perception of voice handicap and a possible effect on vocal quality in street vendors were noted. The effect of factors, namely work hours and educational level, on voice quality should be further studied. Copyright © 2017. Published by Elsevier Inc.

  6. Optimum back-pressure forging using servo die cushion

    OpenAIRE

    Kawamoto, Kiichiro; Yoneyama, Takeshi; Okada, Masato; Kitayama, Satoshi; Chikahisa, Junpei

    2014-01-01

    This study focused on utilizing a servo die cushion (in conjunction with a servo press) as a "back-pressure load generator," to determine its effect on shape accuracy of the formed part and total forming load in forward extrusion during cold forging. The effect of back-pressure load application was confirmed in experiments, and the optimum setting pattern of back-pressure load was considered to minimize both shape accuracy of the formed part and back-pressure energy, which was representative ...

  7. Fatigue behavior of rolled and forged tungsten at 25°, 280° and 480 °C

    International Nuclear Information System (INIS)

    Habainy, J.; Iyengar, S.; Lee, Y.; Dai, Y.

    2015-01-01

    Pure tungsten has been chosen as the target material at the European Spallation Source facility in Lund. Calculations show that the target temperature can reach 500 °C momentarily during the spallation process, leading to thermal fatigue. Target life estimations require fatigue data at different temperatures and this work focuses on generating such data for pure, unirradiated, rolled and forged tungsten in the range 25°–480 °C. For specimens oriented in the rolling direction, tensile tests at room temperature indicated Young's modulus values in the range 320–390 GPa, low levels of plasticity (<0.23%) and UTS values in the range 397 MPa (unpolished) and 705 MPa (Polished). UTS for forged specimens were around 500 MPa. Stress-controlled fatigue tests were conducted in the tensile regime, with a runout limit of 2 × 10"6 cycles. At 25 °C, unpolished specimens had fatigue limits of 150 MPa (rolling and transverse direction), and 175 MPa (forged). For polished specimens in the rolling direction, fatigue limits were higher at 237.5 MPa (25 °C) and 252.5 MPa (280 °C). The forged specimens showed slightly better fatigue properties and marginal cyclic hardening at 480 °C. - Highlights: • Stress & strain-controlled fatigue tests on pure tungsten at 25°, 280° & 480 °C. • Unirradiated, rolled and forged specimens in polished and unpolished condition. • Min. tensile strength (MPa): 397 (25 °C), 472 (280 °C) and 363 (480 °C). • Min. endurance limit (MPa): 137.5 (25 °C), 250 (280 °C) and 150 (480 °C). • Marginal cyclic hardening observed at 480 °C.

  8. Influence of segregations and hydrogen flakes on the mechanical properties of forged RPV steels

    International Nuclear Information System (INIS)

    Eiselt, C.C.; May, J.; Hein, H.

    2013-01-01

    In the frame of relevant 1970s/80s German research programs (e.g. FKS research program on component safety and others), many investigations on large forgings manufactured from Reactor Pressure Vessel (RPV) materials such as 20 MnMoNi 5 5 and 22 NiMoCr 3 7 have been performed. Lately, after ultrasonic testing hydrogen flakes in connection with segregation zones have been observed in a few RPV forgings. The earlier R and D programs contained a number of special heats, which covered a defined defect state (lower bound heats) with relevance to the recent observations of numerous UT indications in RPV forgings of two PWRs. Therefore, the results of these former research programs were now reviewed. The studies included an evaluation of the effects of macro/micro segregations as well as hydrogen flakes on the mechanical properties. As part of the mechanical technological experiments Charpy impact tests in different orientations (e.g. L-T, T-L and S-T) together with fracture mechanics and large scale tensile tests were carried out in segregated and non segregated material zones. In this context the letters L,T,S indicate the longitudinal, transversal and short transverse (thickness) direction with respect to rolling direction of the forging axis. The first letter indicates the direction of the principal stress, while the second letter stands for the crack propagation direction [1]. Furthermore the irradiation behavior of segregated material regions was analyzed and compared to non segregated material regions. Key results of these analyses indicate that in most cases upper shelf levels are lowered in segregated material parts compared to non segregated areas. In addition the segregations cause a larger scattering of impact energies. A high hydrogen content in combination with segregations has overall detrimental effects on the mechanical properties. However, there seems to be no specific segregation influence on the materials' irradiation reaction.

  9. Best possible heat treatment of steel SA 336 F22 for the production of forged shells with heavy walls

    International Nuclear Information System (INIS)

    Badeau, J.P.; Poitrault, I.S.; De Badereau, A.; Blondeau, R.P.

    1986-01-01

    The manufacturing of thick-wall components, such as shells, for petrochemical reactors normally requires the 2.25Cr-1Mo(SA 336 F22) steel. This paper deals with: 1. Experienced difficulties in producing thick-wall forgings up to a thickness of 500 mm with standard 2.25Cr-1Mo steel. 2. The solutions offered by Le Creusot Heavy Forge. The studies discussed are: (1) the effect of the structure; (2) the effect of the chemical composition on hardenability and temper embrittlement in steel making; and (3) the effect of austenitization conditions. Some examples concerning industrial forgings are presented, among them: 1. The manufacturing of shells for the petrochemical industry. 2. A thick-wall shell from a 146-metric ton hollow ingot

  10. Salmonellae carrier status of food vendors in Kumasi, Ghana | Feglo ...

    African Journals Online (AJOL)

    230 females of 28 males) healthy food vendors for Salmonella typhi, and S. paratyphi A, B, and C, using stool culture, the widal test, and standard microbiological identification methods. Main outcome measures: Prevalence of chronic typhoidal ...

  11. 33 CFR 155.1026 - Qualified individual and alternate qualified individual.

    Science.gov (United States)

    2010-07-01

    ... familiar with the implementation of the vessel response plan; and (4) Be trained in the responsibilities of... vessel may designate an organization to fulfill the role of the qualified individual and alternate...

  12. Hot Deformation Behavior and Pulse Current Auxiliary Isothermal Forging of Hot Pressing Sintering TiAl Based Alloys.

    Science.gov (United States)

    Shi, Chengcheng; Jiang, Shaosong; Zhang, Kaifeng

    2017-12-16

    This paper focuses on the fabrication of as-forged Ti46.5Al2Cr1.8Nb-(W, B) alloy via pulse current auxiliary isothermal forging (PCIF). The starting material composed of near gamma (NG) microstructure was fabricated by adopting pre-alloyed powders via hot pressing sintering (HPS) at 1300 °C. Isothermal compression tests were conducted at a strain rate range of 0.001-0.1 s -1 and a temperature range of 1125-1275 °C to establish the constitutive model and processing map. The optimal hot deformation parameters were successfully determined (in a strain rate range of 10 -3 -2.5 × 10 -3 s -1 and temperature range of 1130-1180 °C) based on the hot processing map and microstructure observation. Accordingly, an as-forged TiAl based alloy without cracks was successfully fabricated by PCIF processing at 1175 °C with a nominal strain rate of 10 -3 s -1 . Microstructure observation indicated that complete dynamic recrystallization (DRX) and phase transformation of γ→α₂ occurred during the PCIF process. The elongation of as-forged alloy was 136%, possessing a good secondary hot workability, while the sintered alloy was only 66% when tested at 900 °C with a strain rate of 2 × 10 -4 s -1 .

  13. Socio - demographic characteristics of child street vendors in Nnewi ...

    African Journals Online (AJOL)

    Background: Involvement of children in street trading is inimical, contrary to the Rights of the Child, and threatens holistic child development. Objective: To describe the sociodemographic characteristics of child street vendors in Nnewi. Method: A cross-sectional questionnaire survey of children selling wares on the streets of ...

  14. Evolution of the Ultrasonic Inspection of Heavy Rotor Forgings Over the Last Decades

    Science.gov (United States)

    Zimmer, A.; Vrana, J.; Meiser, J.; Maximini, W.; Blaes, N.

    2010-02-01

    All types of heavy forgings that are used in energy machine industry, rotor shafts as well as discs, retaining rings or tie bolts are subject to extensive nondestructive inspections before they are delivered to the customer. Due to the availability of the parts in simple shapes, these forgings are very well suited for full volmetric inspections using ultrasound. In the beginning, these inspections were carried out manually, using straight beam probes and analogue equipment. Higher requirements in reliability, efficiency, safety and power output in the machines have lead to higher requirements for the ultrasonic inspection in the form of more scanning directions, higher sensitivity demands and improved documentation means. This and the increasing use of high alloy materials for ever growing parts, increase the need for more and more sophisticated methods for testing the forgings. Angle scans and sizing technologies like DGS have been implemented, and for more than 15 years now, mechanized and automated inspections have gained importance since they allow better documentation as well as easier evaluation of the recorded data using different views (B- C- or D-Scans), projections or tomography views. The latest major development has been the availability of phased array probes to increase the flexibility of the inspection systems. Many results of the ongoing research in ultrasonic's have not been implemented yet. Today's availability of fast computers, large and fast data storages allows saving RF inspection data and applying sophisticated signal processing methods. For example linear diffraction tomography methods like SAFT offer tools for 3D reconstruction of inspection data, simplifying sizing and locating of defects as well as for improving signal to noise ratios. While such methods are already applied in medical ultrasonic's, they are still to be implemented in the steel industry. This paper describes the development of the ultrasonic inspection of heavy forgings

  15. What's Your Money Worth? Materials Budgets and the Selection and Evaluation of Book and Serial Vendors.

    Science.gov (United States)

    Barker, Joseph W.

    1992-01-01

    Discusses budgets for library materials and how to select and evaluate book and serial vendors. Trends in automation, publishing, and economics that affect both libraries and vendors are discussed; and examples from the University of California at Berkeley that include serials service charges and approval plan discounts are presented. (six…

  16. Shopping in Hospitality: Situational Constructions of Customer-Vendor Relationships among Shopping Tourists at a Bazaar on the German-Polish Border

    Science.gov (United States)

    Busch, Dominic

    2010-01-01

    This article presents an analysis of a short customer-vendor dialogue between a German couple and a Polish vendor at a food bazaar on the Polish border with Germany. In this situation, interactants have to negotiate and construct framings of hospitality abroad, customer-vendor relations, as well as intercultural relations. It is assumed that…

  17. Supply Inventory Management: Evaluation of the Defense Supply Center Columbus Qualified Products List and Qualified Manufacturers List Program

    National Research Council Canada - National Science Library

    2002-01-01

    ... was transitioned from the Military Departments. The Defense Supply Center Columbus currently has management responsibility for over 300 Qualified Products Lists and 4 Qualified Manufacturers Lists...

  18. Reflections on the newly qualified social worker's journey : From university training to qualified practice

    OpenAIRE

    Walker, Clare

    2014-01-01

    This qualitative research study explores the experience of graduating social workers making the transition from university training into work as qualified social work practitioners. Most studies in this area look at the practice readiness of the newly qualified professional. This study looks at the participants’ experience in the work place. How do participants experience this journey of transition? What skills, particularly reflective practice and supervision, learned in training, are import...

  19. 33 CFR 154.1026 - Qualified individual and alternate qualified individual.

    Science.gov (United States)

    2010-07-01

    ... alternate must: (1) Be located in the United States; (2) Speak fluent English; (3) Be familiar with the... facility may designate an organization to fulfill the role of the qualified individual and the alternate...

  20. Patent Medicine Vendors in Rural Areas of Lagos Nigeria ...

    African Journals Online (AJOL)

    Purpose: To determine the compliance of patent medicine vendors (PMVs) in rural areas of Lagos State, Nigeria with set guidelines to regulate their practice and its implications for malaria control. Methods: A baseline cross-sectional study was conducted as part of an intervention study in two rural local government areas ...

  1. Engine piston assembly and forged piston member therefor having a cooling recess

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, B.C.; Erickson, K.L.; Green, J.A.; Nyez, D.S.

    1989-09-19

    This patent describes a forged steel piston member for reciprocating movement in an engine. It comprises: an upper portion of substantially cylindrical shape and having a central axis, a top surface, a tubular wall depending from the top surface and having a peripheral groove adapted to receive a sealing ring, a lower end surface, and an inwardly facing wall surface extending upwardly from the lower end surface. The upper portion further includes an outwardly facing wall surface spaced radially inwardly from the inwardly facing wall surface and a downwardly facing transition portion blendingly associated with the inwardly and outwardly facing wall surfaces to collectively define an annular cooling recess, the transition portion being elevational spaced a relatively short distance from the top surface; and the inwardly facing wall surface being a machined surface of revolution about the central axis integral or one-piece forging.

  2. FE-simulation of hot forging with an integrated heat treatment with the objective of residual stress prediction

    Science.gov (United States)

    Behrens, Bernd-Arno; Chugreeva, Anna; Chugreev, Alexander

    2018-05-01

    Hot forming as a coupled thermo-mechanical process comprises numerous material phenomena with a corresponding impact on the material behavior during and after the forming process as well as on the final component performance. In this context, a realistic FE-simulation requires reliable mathematical models as well as detailed thermo-mechanical material data. This paper presents experimental and numerical results focused on the FE-based simulation of a hot forging process with a subsequent heat treatment step aiming at the prediction of the final mechanical properties and residual stress state in the forged component made of low alloy CrMo-steel DIN 42CrMo4. For this purpose, hot forging experiments of connecting rod geometry with a corresponding metallographic analysis and x-ray residual stress measurements have been carried out. For the coupled thermo-mechanical-metallurgical FE-simulations, a special user-defined material model based on the additive strain decomposition method and implemented in Simufact Forming via MSC.Marc solver features has been used.

  3. An evaluation of vendor managed inventory practices from small and medium indian enterprises

    DEFF Research Database (Denmark)

    Shen, Lixin; Govindan, Kannan; Borade, Atul B.

    2013-01-01

    Vendor managed inventory has proven to be an effective tool for improving the supply chain performance by decreasing inventory-related costs and increasing customer service. It is quite evident from the literature that vendor managed inventory (VMI) has been successfully implemented in small...... and medium enterprises (SMEs). However, studies related to the implementation of VMI in Indian SMEs are very limited. Therefore, this study presents an empirical investigation of VMI practices in Indian SMEs using survey methodology. The paper evaluates the benefits, barriers, and effects of adopting VMI...

  4. Study on antioxidant experiment on forged steel tube sheet and tube hole for steam generator

    International Nuclear Information System (INIS)

    Zong Hai; Wang Detai; Ding Yang

    2012-01-01

    Antioxidant experiment on forged steel tube sheet and tube hole for steam generator was studied and the influence of different simulated heat treatments on the antioxidant performance of tube sheet and tube hole was made. The influence of different antioxidant methods on the size of tube hole was drawn. Furthermore, the change of size and weight of 18MnD5 forged steel tube sheet on the condition of different simulated heat treatments was also studied. The analytical results have proved reference information for the use of 18MnD5 material and for key processes of processing tube hole and wearing and expanding U-style tube. (authors)

  5. Technical Evaluation Report 30: Vendor-Assisted Evaluation of a Learning Management System

    Directory of Open Access Journals (Sweden)

    Adrienne De Schutter

    2004-04-01

    Full Text Available A product evaluation was conducted of Desire2Learn, an online learning management system gaining popularity in educational institutions. Since an online trial version of the software was not available for evaluation, an inspection meeting with the vendor was arranged. This provided the evaluation team with an opportunity to examine the precautions necessary for ensuring the objectivity of a product evaluation based on vendor-supplied information. The report outlines the team’s use of evaluator-driven enquiry and a triangulated approach to information checking. The Desire2Learn product is assessed as a flexible and useful addition to the range of learning management system options.

  6. The role of private drug vendors as malaria treatment providers in selected malaria endemic areas of Sri Lanka

    DEFF Research Database (Denmark)

    Rajakaruna, R S; Weerasinghe, M; Alifrangis, M

    2006-01-01

    was applied taking all response variables as binary outcome. RESULTS: Vendors' knowledge on antimalarials was poor with 58% of the vendors being unaware of the government malaria drug policy in the country. Also, the advice provided to customers buying antimalarials was limited. However, the majority......BACKGROUND AND OBJECTIVES: The involvement of private drug vendors in malaria treatment is particularly high in developing countries and understanding their practices and knowledge about antimalarials and malaria treatment will aid in devising strategies to increase the correct use of antimalarials...... and improve adherence to the government's malaria drug policy. Results of a study on the knowledge and practices of the private drug vendors conducted in seven districts in Sri Lanka, mostly in malarious areas are presented. METHODS: Data on awareness of government's malaria drug policy, practice of issuing...

  7. Social Work and Engineering Collaboration: Forging Innovative Global Community Development Education

    Science.gov (United States)

    Gilbert, Dorie J.

    2014-01-01

    Interdisciplinary programs in schools of social work are growing in scope and number. This article reports on collaboration between a school of social work and a school of engineering, which is forging a new area of interdisciplinary education. The program engages social work students working alongside engineering students in a team approach to…

  8. Comparing image quality of print-on-demand books and photobooks from web-based vendors

    Science.gov (United States)

    Phillips, Jonathan; Bajorski, Peter; Burns, Peter; Fredericks, Erin; Rosen, Mitchell

    2010-01-01

    Because of the emergence of e-commerce and developments in print engines designed for economical output of very short runs, there are increased business opportunities and consumer options for print-on-demand books and photobooks. The current state of these printing modes allows for direct uploading of book files via the web, printing on nonoffset printers, and distributing by standard parcel or mail delivery services. The goal of this research is to assess the image quality of print-on-demand books and photobooks produced by various Web-based vendors and to identify correlations between psychophysical results and objective metrics. Six vendors were identified for one-off (single-copy) print-on-demand books, and seven vendors were identified for photobooks. Participants rank ordered overall quality of a subset of individual pages from each book, where the pages included text, photographs, or a combination of the two. Observers also reported overall quality ratings and price estimates for the bound books. Objective metrics of color gamut, color accuracy, accuracy of International Color Consortium profile usage, eye-weighted root mean square L*, and cascaded modulation transfer acutance were obtained and compared to the observer responses. We introduce some new methods for normalizing data as well as for strengthening the statistical significance of the results. Our approach includes the use of latent mixed-effect models. We found statistically significant correlation with overall image quality and some of the spatial metrics, but correlations between psychophysical results and other objective metrics were weak or nonexistent. Strong correlation was found between psychophysical results of overall quality assessment and estimated price associated with quality. The photobook set of vendors reached higher image-quality ratings than the set of print-on-demand vendors. However, the photobook set had higher image-quality variability.

  9. Forgings made of austenitic chromium-nickel steels for the low temperature range

    International Nuclear Information System (INIS)

    Gruendler, O.; Schwarz, W.; Koren, M.

    1981-01-01

    The authors discuss the low temperature application of austenitic chromium-nickel steels for energy production and process techniques. Material requirements are presented, and the behaviour, mechanical and physical properties of such steels are discussed. The manufacture of forgings is considered and test results presented. (Auth.)

  10. Forgings made of austenitic chromium-nickel steels for the low temperature range

    Energy Technology Data Exchange (ETDEWEB)

    Gruendler, O.; Schwarz, W.; Koren, M. (Vereinigte Edelstahlwerke A.G. (VEW), Kapfenberg (Austria))

    1981-09-01

    The authors discuss the low temperature application of austenitic chromium-nickel steels for energy production and process techniques. Material requirements are presented, and the behaviour, mechanical and physical properties of such steels are discussed. The manufacture of forgings is considered and test results presented.

  11. Fatigue and fracture behavior of low alloy ferritic forged steels

    International Nuclear Information System (INIS)

    Chaudhry, V.; Sharma, A.K.; Muktibodh, U.C.; Borwankar, Neeraj; Singh, D.K.; Srinivasan, K.N.; Kulkarni, R.G.

    2016-01-01

    Low alloy ferritic steels are widely used in nuclear industry for the construction of pressure vessels. Pressure vessel forged low alloy steels 20MnMoNi55 (modified) have been developed indigenously. Experiments have been carried out to study the Low Cycle Fatigue (LCF) and fracture behavior of these forged steels. Fully reversed strain controlled LCF testing at room temperature and at 350 °C has been carried out at a constant strain rate, and for different axial strain amplitude levels. LCF material behavior has been studied from cyclic stress-strain responses and the strain-life relationships. Fracture behavior of the steel has been studied based on tests carried out for crack growth rate and fracture toughness (J-R curve). Further, responses of fatigue crack growth rate tests have been compared with the rate evaluated from fatigue precracking carried out for fracture toughness (J-R) tests. Fractography of the samples have been carried out to reveal dominant damage mechanisms in crack propagation and fracture. The fatigue and fracture properties of indigenously developed low alloy steel 20MnMoNi55 (modified) steels are comparable with similar class of steels. (author)

  12. Effect of precipitates on microstructures and properties of forged Mg-10Gd-2Y-0.5Zn-0.3Zr alloy during ageing process

    International Nuclear Information System (INIS)

    Han, X.Z.; Xu, W.C.; Shan, D.B.

    2011-01-01

    Highlights: · The effect of forging process on microstructure evolution and mechanical properties of Magnesium alloy with rare earth was investigated. · The optimal mechanical properties of the alloy with high strength and enough elongation were obtained after forging and ageing process. · The strength improvement of the alloy after forging and ageing process mainly results from the precipitation of 14H-type LPSO phase. · Strengthening mechanism of the alloy is controlled by the precipitation of β' and 14H-type LPSO phases which can inhibit sliding of dislocations and growth of grain boundaries. - Abstract: The precipitate behavior during forging and ageing process of Mg-10Gd-2Y-0.5Zn-0.3Zr alloy has been investigated by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The mechanical properties of the alloy after forging and ageing process have been evaluated using Vickers hardness and room-temperature tensile tests. The results show that precipitation of 14H-type long period stacking order (LPSO) phase is the main strengthening phase in the as-forged alloy. The LPSO phase and refinement of grains contribute to the strength improvement of the alloy after forging process. The optimal mechanical properties of the alloy are obtained when it is aged at 200 deg. C for 60 h, which mainly owes to the precipitation of large amounts of β' and 14H-type LPSO phases on the α-Mg matrix. The growth of secondary phases, widening of soft precipitate free zones and coarsening of grains during subsequent ageing process at higher temperature lead to the decrease of mechanical properties of the alloy.

  13. Multi-objective optimization of swash plate forging process parameters for the die wear/service life improvement

    Science.gov (United States)

    Hu, X. F.; Wang, L. G.; Wu, H.; Liu, S. S.

    2017-12-01

    For the forging process of the swash plate, the author designed a kind of multi-index orthogonal experiment. Based on the Archard wear model, the influences of billet temperature, die temperature, forming speed, top die hardness and friction coefficient on forming load and die wear were numerically simulated by DEFORM software. Through the analysis of experimental results, the best forging process parameters were optimized and determined, which could effectively reduce the die wear and prolong the die service life. It is significant to increase the practical production of enterprise, especially to reduce the production cost and to promote enterprise profit.

  14. A Critical Examination of IT-21: Thinking Beyond Vendor-Based Standards

    National Research Council Canada - National Science Library

    Trupp, Travis

    1999-01-01

    .... This thesis takes a critical look at the IT-21 policy from an economic, security, availability, procurement, and practical level, and explores the role of vendor-based standards in the Navy computing architecture...

  15. MODEL PEMILIHAN VENDOR TRUCKING PRIORITAS DAN ALOKASI ORDER UNTUK DELIVERY PROJECT ACCOUNT PERFETTI VAN MELLE INDONESIA (CASE STUDY : PT DAMCO INDONESIA

    Directory of Open Access Journals (Sweden)

    Erna Mulyati

    2014-01-01

    Full Text Available Proses pemilihan vendor sangat penting untuk diperhatikan dan dilaksanakan sebaik mungkin dalam upaya memberikan dan meningkatkan pelayanan yang diberikan demi terciptanya kepuasan pelanggan secara maksimal. PT Damco Indonesia harus mampu menentukan dan memilih mitra kerja terbaik yang memiliki kualitas kinerja sesuai dengan standar yang telah ditetapkan perusahaan, khususnya dalam memilih vendor. Kesalahan memilih Vendor dapat menyebabkan kerugian bagi perusahaan. Fuzzy Synthetic Evaluation merupakan suatu metode yang digunakan untuk menilai kinerja vendor yang memberi fleksibilitas  untuk  menampung  ketidakpastian  akibat  samarnya  informasi  yang dimiliki  maupun  unsur  preferensi  yang  subjektif  yang  dapat  digunakan  dalam masalah  pengambilan  keputusan. Metode ini digunakan untuk mendapatkan  Third Party Logistic (3PL yang akan digunakan untuk mengalokasikan order ke pelanggan. Pengalokasi order dilakukan dengan mengaplikasikan algoritma transportasi. Penulis menggunakan dua buah metode dalam algoritma ini yaitu Vogell’s Aproximation Method (VAM untuk penentuan tabel awalnya dan Modified Distribution Method untuk melakukan pengujian terhadap tabel awal yang terbentuk untuk melihat keoptimalannya. Hasil urutan kriteria performansi berdasarkan kuesioner pembobotan yang telah ditentukan melalui tahapan wawancara dan studi lapangan di perusahaan yaitu harga/tarif, network coverage, office equipment, infratruktur  dan kualitas pelayanan, dimana terdapat sub kriteria untuk kualitas yang terdiri dari kualitas alat angkut beserta umur peralatan, asuransi, dan ability to provide Custome Delivery. Hasil perhitungan dengan Fuzzy Synthetic Evaluation diperoleh hasil vendor PT Adi Sarana Armada  dan Muna Jaya Expres sama-sama memiliki  nilai keanggotaan  terbesar  yaitu  0,22  di kategori “baik” yang  berarti  bahwa  kedua vendor tersebut  memiliki  kinerja  yang lebih baik dibandingkan dengan vendor

  16. VENDOR SELECTION AND DETERMINING PROCUREMENT QUOTAS IN CONDITIONS WHEN DISCOUNTS ARE OFFERED ON THE TOTAL VALUE OF THE CONTRACTED PROCUREMENT OF MANY DIFFERENT PRODUCTS

    Directory of Open Access Journals (Sweden)

    Zoran Babic

    2012-04-01

    Full Text Available Vendor selection is a very significant business problem for ensuring the competitiveness on the market. That is why companies pay great attention to this problem. To solve the vendor selection problems can be applied to a number of quantitative methods. Depending on the goals of the company the vendor selection can be a mono-criterion or multi-criterion programming problem. This paper deals with the problem of vendor selection and determining procurement quotas from selected vendors under conditions where vendors offer discounts to the total order value within a specified period where the buyer buys more products from the vendors. The total value of procurement costs in a given period is taken as an optimization criterion. In this paper the specific flour purchase problem is solved for a company that manufactures bakery products

  17. VENDOR SELECTION AND DETERMINING PROCUREMENT QUOTAS IN CONDITIONS WHEN DISCOUNTS ARE OFFERED ON THE TOTAL VALUE OF THE CONTRACTED PROCUREMENT OF MANY DIFFERENT PRODUCTS

    Directory of Open Access Journals (Sweden)

    Zoran Babić

    2012-04-01

    Full Text Available Vendor selection is a very significant business problem for ensuring the competitiveness on the market. That is why companies pay great attention to this problem. To solve the vendor selection problems can be applied to a number of quantitative methods. Depending on the goals of the company the vendor selection can be a mono-criterion or multi-criterion programming problem. This paper deals with the problem of vendor selection and determining procurement quotas from selected vendors under conditions where vendors offer discounts to the total order value within a specified period where the buyer buys more products from the vendors. The total value of procurement costs in a given period is taken as an optimization criterion. In this paper the specific flour purchase problem is solved for a company that manufactures bakery products.

  18. How often and under which circumstances do Mexican pharmacy vendors recommend misoprostol to induce an abortion?

    Science.gov (United States)

    Lara, Diana; García, Sandra G; Wilson, Kate S; Paz, Francisco

    2011-06-01

    Misoprostol was used by women across Mexico to induce abortion even before 2007, when first-trimester abortion was legalized in Mexico City. Pharmacy vendors' misoprostol recommendation practices across subregions of Mexico after abortion legalization warrant examination. Overall, 192 pharmacies in four regions of Mexico were randomly selected and visited by simulated clients presenting three scenarios (a young woman, an adult woman and a male partner). Bivariate and multivariate analyses were used to explore associations between pharmacy, vendor and client characteristics and drug access. In 558 encounters with simulated clients, 78% of vendors provided information about misoprostol-18% recommended it spontaneously and 60% recommended it only after the client asked specifically for the drug. Fifteen percent of vendors recommended a potentially effective misoprostol dosing regimen. Mexico City-based pharmacies and those in the Central region were significantly less likely than those in the North region to require a prescription to sell misoprostol (odds ratios, 0.2 and 0.3, respectively). Independent pharmacies and those from low-?income areas were significantly more likely to sell misoprostol by the pill than chain pharmacies and those in medium-income areas (3.2 and 2.7, respectively). Access to misoprostol is influenced by neighborhood socioeconomic level, pharmacy location and pharmacy type. The frequently inaccurate and incomplete information provided to clients about using misoprostol for abortion suggests the need to improve pharmacy vendor training in medication abortion options and to develop ways to directly inform women about misoprostol use.

  19. Forging C-C Bonds Through Decarbonylation of Aryl Ketones.

    Science.gov (United States)

    Somerville, Rosie J; Martin, Ruben

    2017-06-06

    The ability of nickel to cleave strong σ-bonds is again in the spotlight after a recent report that demonstrates the feasibility of using nickel complexes to promote decarbonylation of diaryl ketones. This transformation involves the cleavage of two strong C-C(O) bonds and avoids the use of noble metals, hence reinforcing the potential of decarbonylation as a technique for forging C-C bonds. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. 11 CFR 9004.4 - Use of payments; examples of qualified campaign expenses and non-qualified campaign expenses.

    Science.gov (United States)

    2010-01-01

    ... 11 Federal Elections 1 2010-01-01 2010-01-01 false Use of payments; examples of qualified campaign expenses and non-qualified campaign expenses. 9004.4 Section 9004.4 Federal Elections FEDERAL ELECTION COMMISSION PRESIDENTIAL ELECTION CAMPAIGN FUND: GENERAL ELECTION FINANCING ENTITLEMENT OF ELIGIBLE CANDIDATES...

  1. Performance outcomes and success factors of vendor managed inventory (VMI)

    NARCIS (Netherlands)

    Claassen, M.J.T.; Weele, van A.J.; Raaij, van E.M.

    2008-01-01

    Purpose – The purpose of this paper is to seek to investigate performance outcomes of vendor managed inventory (VMI) from a buyer's perspective and enablers for its successful application. Design/methodology/approach – Structural equation modelling through Partial Least Squares (PLS) is used to

  2. Process Control/SCADA system vendor security awareness and security posture.

    NARCIS (Netherlands)

    Luiijf, H.A.M.; Lüders, S.

    2009-01-01

    A starting point for the adequate security of process control/SCADA systems is the security awareness and security posture by the manufacturers, vendors, system integrators, and service organisations. The results of a short set of questions indicate that major security improvements are required in

  3. Nominal Group as Qualifier to "Someone"

    Science.gov (United States)

    Sujatna, Eva Tuckyta Sari; Wahyuni, Sri

    2017-01-01

    The paper titled "Nominal Group as Qualifier to 'Someone'" investigated types of qualifiers which are embedded to the head "someone" in a nominal group. This research was conducted in the light of Systemic Functional Linguistics analysis. The data was analyzed, classified then described using descriptive qualitative method.…

  4. 30 CFR 75.155 - Qualified hoisting engineer; qualifications.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Qualified hoisting engineer; qualifications. 75... Persons § 75.155 Qualified hoisting engineer; qualifications. (a)(1) A person is a qualified hoisting engineer within the provisions of subpart O of this part, for the purpose of operating a steam-driven hoist...

  5. Qualified Census Tracts

    Data.gov (United States)

    Department of Housing and Urban Development — A Qualified Census Tract (QCT) is any census tract (or equivalent geographic area defined by the Census Bureau) in which at least 50% of households have an income...

  6. Measuring Library Vendor Cyber Security: Seven Easy Questions Every Librarian Can Ask

    Directory of Open Access Journals (Sweden)

    Alex Caro

    2016-04-01

    Full Text Available This article is based on an independent cyber security risk management audit for a public library system completed by the authors in early 2015 and based on a research paper by the same group at Clark University in 2014. We stress that while cyber security must include raising public knowledge in regard to cyber security issues and resources, and libraries are indeed the perfect place to disseminate this knowledge, librarians are also in a unique position as the gatekeepers of information services provided to the public and should conduct internal audits to ensure our content partners and IT vendors take cyber security as seriously as the library and its staff. One way to do this is through periodic reviews of existing vendor relationships. To this end, the authors created a simple grading rubric you can adopt or modify to help take this first step towards securing your library data. It is intended to be used by both technical and non-technical staff as a simple measurement of what vendor agreements currently exist and how they rank, while at the same time providing a roadmap for which security features or policy statements the library can or should require moving forward.

  7. The Influence of Temperature on the Frictional Behavior of Duplex-Coated Die Steel Rubbing Against Forging Brass

    Science.gov (United States)

    Ebrahimzadeh, I.; Ashrafizadeh, F.

    2015-01-01

    Improvement of die life under hot forging of brass alloys is considered vital from both economical and technical points of view. One of the best methods for improving die life is duplex coatings. In this research, the influence of temperature on the tribological behavior of duplex-coated die steel rubbing against forging brass was investigated. The wear tests were performed on a pin-on-disk machine from room temperature to 700 °C; the pins were made in H13 hot work tool steel treated by plasma nitriding and by PVD coatings of TiN-TiAlN-CrAlN. The disks were machined from a two-phase brass alloy too. The results revealed that the friction coefficient of this tribosystem went through a maximum at 550 °C and decreased largely at 700 °C. Furthermore, the formation of Cr2O3 caused the reduction of friction coefficient at 700 °C. PVD coatings proved their wear resistance up to 550 °C, well above the working temperature of the brass forging dies.

  8. [Research on the temperature field detection method of hot forging based on long-wavelength infrared spectrum].

    Science.gov (United States)

    Zhang, Yu-Cun; Wei, Bin; Fu, Xian-Bin

    2014-02-01

    A temperature field detection method based on long-wavelength infrared spectrum for hot forging is proposed in the present paper. This method combines primary spectrum pyrometry and three-stage FP-cavity LCTF. By optimizing the solutions of three group nonlinear equations in the mathematical model of temperature detection, the errors are reduced, thus measuring results will be more objective and accurate. Then the system of three-stage FP-cavity LCTF was designed on the principle of crystal birefringence. The system realized rapid selection of any wavelength in a certain wavelength range. It makes the response of the temperature measuring system rapid and accurate. As a result, without the emissivity of hot forging, the method can acquire exact information of temperature field and effectively suppress the background light radiation around the hot forging and ambient light that impact the temperature detection accuracy. Finally, the results of MATLAB showed that the infrared spectroscopy through the three-stage FP-cavity LCTF could meet the requirements of design. And experiments verified the feasibility of temperature measuring method. Compared with traditional single-band thermal infrared imager, the accuracy of measuring result was improved.

  9. Microstructures and tensile properties of Mg–Gd–Y–Zr alloy during multidirectional forging at 773 K

    International Nuclear Information System (INIS)

    Tang, Liechong; Liu, Chuming; Chen, Zhiyong; Ji, Dawei; Xiao, Hongchao

    2013-01-01

    Highlights: • Rare earth (RE) containing Mg–Gd–Y–Zr alloy was successfully multidirectional forged for 8 passes without any cracks. • Initial coarse grains was refined due to a combination of discontinuous and continuous dynamic recrystallization. • The alloy MDFed after 6 passes exhibited an excellent balance of strength and ductility at room temperature. - Abstract: A homogenized Mg–10Gd–4.8Y–0.6Zr (wt.%) alloy was subjected to multidirectional forging (MDF) at 773 K. It was shown that the average grain size decreased with increasing cumulative strain till 6 passes. Uniform fine-grained structure with an average grain size of 9.3 μm was achieved after 6 passes, i.e., cumulative strain of 1.8. Results revealed that grain refinement was induced by a complicated combination of discontinuous dynamic recrystallization at low strain regions and continuous dynamic recrystallization or rotation recrystallization at medium-to-high strain regions. The alloy multi-directionally forged (MDFed) for 6 passes exhibited an excellent balance of strength and ductility at room temperature with ultimate tensile strength (UTS) of 336 MPa and elongation to fracture of 21.0%

  10. The analysis of forming and strain state of the hollow step forgings during the enlarging process

    Directory of Open Access Journals (Sweden)

    Олег Євгенійович Марков

    2017-12-01

    Full Text Available Improving safety, accelerating construction and extending the life of nuclear power plants is one of the main directions of the development of the energy industry. From this point of view, much attention is being paid to the production of forgings, which combine a few details today. This requires the use of new technologies with the use of non-standard tools. The purpose of the work is analyze of the shape and the deformation state of the conical stepped forging when rolling the stepped workpiece with the simultaneous deformation of the protuberance and the ledge. The simulation was performed using finite element method, which is consistent with experimental data. Experimental studies were carried out on lead models. Rolling of stepped workpiece with simultaneous deformation of the protrusion and ledge leads to the appearance of conical forging. Taper on the side of the ledge occurs at the initial stage of rolling and during the whole process increases. The emergence of a conical shape is explained by the fact that during slipping, with the same absolute deformation (stroke, the ledge gets more accumulated deformation through a more precise wall.

  11. 26 CFR 1.132-9 - Qualified transportation fringes.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 2 2010-04-01 2010-04-01 false Qualified transportation fringes. 1.132-9... Qualified transportation fringes. (a) Table of contents. This section contains a list of the questions and answers in § 1.132-9. (1) General rules. Q-1. What is a qualified transportation fringe? Q-2. What is...

  12. Exploratory survey of informal vendor-sold fast food in rural South ...

    African Journals Online (AJOL)

    2011-03-16

    Mar 16, 2011 ... transition, with increasing obesity prevalence mimicking that in urban areas. ... Understanding food availability within urban and rural contexts is important; of .... The reasons that vendors gave for the limited range of. Fast food ...

  13. What are the sales practices of internet cigar vendors in China?

    Science.gov (United States)

    Gao, Junling; Berg, Carla J; Huang, Lulu; Zheng, Pinpin; Fu, Hua

    2015-05-01

    To estimate the number of websites selling cigars in China and to examine their sales and marketing practices. Comprehensive searches were conducted using three keyword terms and two popular internet search engines. A total of 6000 sites were examined. Two raters examined the content of each site using a standardised coding instrument to assess geographic location, presence of warnings, products sold, and promotional strategies. We identified 106 internet cigar vendors, which were located in 16 cities, with most of them being located in developed cities (eg, Shanghai, Guangzhou, Hong Kong). Only 6.6% of internet cigar vendors featured health warnings, and 14.2% featured minimum age of sale warnings. More than 80% of sites sold large cigars, 34.9% sold small or mini cigars, 42.5% sold cigarettes, 28.3% sold tobacco leaves, and 73.6% sold cigar accessories. Third-party online payment was the most frequently accepted payment method. Scanned images of cigars or cigar boxes (92.5%), reduced prices (84.0%), and diffusion of cigar-related information (67.9%) were the most frequently used promotional strategies.+ Internet cigar vendors undermine tobacco control policies and pose many challenges for tobacco control advocates in China. New legislation and enforcement should address these issues. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  14. The Impact of Subsistence Prime Vendor on the Subsistence Supplier Base

    National Research Council Canada - National Science Library

    Sanders, David

    2000-01-01

    .... This research will focus on one of these innovations, the Subsistence Prime Vendor (SPV) Program. The SPV program was implemented to reduce the inventories and to improve the quality of food products purchased to support military dining facilities...

  15. The Forging of a White Gay Aesthetic at the Saint, 1980–84

    Directory of Open Access Journals (Sweden)

    Tim Lawrence

    2011-06-01

    Full Text Available Based on original interviews with key protagonists and documentary research, the article examines the way in which the DJs who worked at the Saint forged a white gay aesthetic across the first half of the 1980s. A private party located in the East Village, New York, the Saint attracted a privileged white male crowd, and this group's position within the emerging culture of neoliberalism, along with the deepening impact of the AIDS epidemic, encouraged its spinners to sever their ties with sounds that were associated with blackness. However, if Saint DJs rejected a high proportion of records that were being released by New York's independents, and also snubbed Chicago house when it broke in 1985, their forging of an aesthetic that emphasised seamless transitions, often between records that contained similar sonic qualities, preempted the style of mixing that would be popularised in house music culture.

  16. Qualified Empathy - Project Report 2015-16

    DEFF Research Database (Denmark)

    Austring, Bennye Düranc; Sørensen, Merete Cornet

    2016-01-01

    UCSJ-delen af den afsluttende rapport fra Nordplus-projektet "Qualified Empathy", der blev gennemført sammen med Metropolia, Helsinki, og NTNU, Trondheim, i 2015 og 15.......UCSJ-delen af den afsluttende rapport fra Nordplus-projektet "Qualified Empathy", der blev gennemført sammen med Metropolia, Helsinki, og NTNU, Trondheim, i 2015 og 15....

  17. The Street Vendors of Bangkok: Alternatives to Indoor Retailers at a Time of Economic Crisis

    OpenAIRE

    John Walsh

    2010-01-01

    Problem statement: During an economic crisis, consumers will use different techniques to make their money go as far as possible: More carefully comparing prices at point of sale locations, bringing out the coins they previously left unused in saving banks, switching to lower cost options and choosing to shop in less convenient locations in order to find discounts. One such option is to use street vendors rather than regular indoor retailers. Street vendors can provide cheaper goods because, i...

  18. Quality surveillance for steel forgings of SA508 Gr.3 used on the main NI equipment of AP1000 nuclear island

    International Nuclear Information System (INIS)

    Liu Lizhao

    2011-01-01

    Being a type of steel with ideal weldability, outstanding ability of anti-neutron irradiation embitterment and good property of fracture toughness and impact toughness, the steel of ASME SA508-3 was used widely for the nuclear island equipment of PWR Nuclear Power Plant. For the 3rd generation nuclear power plant AP1000, all large forgings and some critical components of the SG, RV and PRZ adopt this steel. Through analysis on the critical technical points during manufacturing of the SA508-3 forgings, this article try to identify the key points should be paid attention during the quality surveillance for this type of forgings, and to put forward the supervision method and focus during quality surveillance activities. (author)

  19. Investigating unlicensed retail drug vendors' preparedness and knowledge about malaria: An exploratory study in rural Uganda.

    Science.gov (United States)

    Liow, Eric; Kassam, Rosemin; Sekiwunga, Richard

    2017-10-01

    Despite major efforts to increase the uptake of preventive measures and timely use of the first line antimalarial treatment artemisinin-based combination therapies (ACT), Uganda continues to fall short of meeting its national malaria control targets. One of the challenges has been scaling up effective measures in rural and remote areas where the unlicensed private retail sector remains the first point of contact and a common source of treatment. The current paper discusses unlicensed vendors' (1) training related to malaria case management for children aged five and under, and (2) knowledge related to the cause of malaria, preventive measures, common signs, and symptoms, diagnostic procedures, and best treatment options. A qualitative study using semi-structured interviews was conducted in the rural district of Butaleja, Uganda in 2011. All 88 unlicensed drug outlets enumerated in the study area were visited by six locally recruited research assistants, with one vendor from each outlet invited to participate. The transcripts were analyzed using acceptable qualitative research protocols. About half of the 75 vendors interviewed had received some sort of formal training on malaria at a post-secondary institution, although only 6.7% had qualifications which met licensure requirements. The study found widespread misconceptions relating to the cause, as well as prevention and treatment of malaria. A large majority of the vendors relied primarily on non-specific symptoms and limited physical exams for diagnoses, with less than one-tenth of the vendors recognizing that rapid or microscopic blood testing was necessary to confirm a clinical diagnosis of malaria. While most recognized mosquitoes as the primary vector for malaria, over two-fifths of the vendors held misconceptions about the factors that could increase the risk of malaria, and nearly a third believed that malaria could not be prevented. With respect to acute case management, three-quarters viewed as the best

  20. Characterization of a Viking Blade Fabricated by Traditional Forging Techniques

    Science.gov (United States)

    Vo, H.; Frazer, D.; Bailey, N.; Traylor, R.; Austin, J.; Pringle, J.; Bickel, J.; Connick, R.; Connick, W.; Hosemann, P.

    2016-12-01

    A team of students from the University of California, Berkeley, participated in a blade-smithing competition hosted by the Minerals, Metals, and Materials Society at the TMS 2015 144th annual meeting and exhibition. Motivated by ancient forging methods, the UC Berkeley team chose to fabricate our blade from historical smithing techniques utilizing naturally-occurring deposits of iron ore. This approach resulted in receiving the "Best Example of a Traditional Blade Process/Ore Smelting Technique" award for our blade named "Berkelium." First, iron-enriched sand was collected from local beaches. Magnetite (Fe3O4) was then extracted from the sand and smelted into individual high- and low-carbon steel ingots. Layers of high- and low-carbon steels were forge-welded together, predominantly by hand, to form a composite material. Optical microscopy, energy dispersive spectroscopy, and Vickers hardness mechanical testing were conducted at different stages throughout the blade-making process to evaluate the microstructure and hardness evolution during formation. It was found that the pre-heat-treated blade microstructure was composed of ferrite and pearlite, and contained many nonmetallic inclusions. A final heat treatment was performed, which caused the average hardness of the blade edge to increase by more than a factor of two, indicating a martensitic transformation.

  1. 75 FR 71137 - Vendor Outreach Workshop for Women Owned Small Businesses in the National Capitol Region of the...

    Science.gov (United States)

    2010-11-22

    ... the Interior is hosting a Vendor Outreach Workshop for women owned small businesses in the National... meeting its business goals for small, small disadvantaged, 8(a), woman-owned, HUBZone, and service... DEPARTMENT OF THE INTERIOR Office of the Secretary Vendor Outreach Workshop for Women Owned Small...

  2. The role of private pesticide vendors in preventing access to pesticides for self-poisoning in rural Sri Lanka

    DEFF Research Database (Denmark)

    Weerasinghe, Manjula; Pearson, Melissa; Peiris, Ravi

    2014-01-01

    they did want to help to improve identification of such customers. The community did not blame vendors when pesticides used for self-poison were purchased from their shops. Vendors have already taken steps to restrict access, including selling low toxic products, counselling and asking customer to return...

  3. 75 FR 48986 - Vendor Outreach Workshop for Small Businesses in the National Capitol Region of the United States

    Science.gov (United States)

    2010-08-12

    ... DEPARTMENT OF THE INTERIOR Office of the Secretary Vendor Outreach Workshop for Small Businesses in the National Capitol Region of the United States AGENCY: Office of the Secretary, Interior. ACTION... Interior are hosting a Vendor Outreach Workshop for small businesses in the National Capitol region of the...

  4. Friction welding of a nickel free high nitrogen steel: influence of forge force on microstructure, mechanical properties and pitting corrosion resistance

    Directory of Open Access Journals (Sweden)

    Mrityunjoy Hazra

    2014-01-01

    Full Text Available In the present work, nickel free high nitrogen austenitic stainless steel specimens were joined by continuous drive friction welding process by varying the amount of forge (upsetting force and keeping other friction welding parameters such as friction force, burn-off, upset time and speed of rotation as constant at appropriate levels. The joint characterization studies include microstructural examination and evaluation of mechanical (micro-hardness, impact toughness and tensile and pitting corrosion behaviour. The integrity of the joint, as determined by the optical microscopy was very high and no crack and area of incomplete bonding were observed. Welds exhibited poor Charpy impact toughness than the parent material. Toughness for friction weld specimens decreased with increase in forge force. The tensile properties of all the welds were almost the same (irrespective of the value of the applied forge force and inferior to those of the parent material. The joints failed in the weld region for all the weld specimens. Weldments exhibited lower pitting corrosion resistance than the parent material and the corrosion resistance of the weld specimens was found to decrease with increase in forge force.

  5. 11 CFR 116.3 - Extensions of credit by commercial vendors.

    Science.gov (United States)

    2010-01-01

    ... of credit to nonpolitical debtors that are of similar risk and size of obligation. (b) Incorporated... similar to extensions of credit to nonpolitical debtors that are of similar risk and size of obligation... 11 Federal Elections 1 2010-01-01 2010-01-01 false Extensions of credit by commercial vendors. 116...

  6. Does food vendor density mediate the association between neighborhood deprivation and BMI?: a G-computation mediation analysis.

    Science.gov (United States)

    Zhang, Y Tara; Laraia, Barbara A; Mujahid, Mahasin S; Tamayo, Aracely; Blanchard, Samuel D; Warton, E Margaret; Kelly, N Maggi; Moffet, Howard H; Schillinger, Dean; Adler, Nancy; Karter, Andrew J

    2015-05-01

    In previous research, neighborhood deprivation was positively associated with body mass index (BMI) among adults with diabetes. We assessed whether the association between neighborhood deprivation and BMI is attributable, in part, to geographic variation in the availability of healthful and unhealthful food vendors. Subjects were 16,634 participants of the Diabetes Study of Northern California, a multiethnic cohort of adults living with diabetes. Neighborhood deprivation and healthful (supermarket and produce) and unhealthful (fast food outlets and convenience stores) food vendor kernel density were calculated at each participant's residential block centroid. We estimated the total effect, controlled direct effect, natural direct effect, and natural indirect effect of neighborhood deprivation on BMI. Mediation effects were estimated using G-computation, a maximum likelihood substitution estimator of the G-formula that allows for complex data relations such as multiple mediators and sequential causal pathways. We estimated that if neighborhood deprivation was reduced from the most deprived to the least deprived quartile, average BMI would change by -0.73 units (95% confidence interval: -1.05, -0.32); however, we did not detect evidence of mediation by food vendor density. In contrast to previous findings, a simulated reduction in neighborhood deprivation from the most deprived to the least deprived quartile was associated with dramatic declines in both healthful and unhealthful food vendor density. Availability of food vendors, both healthful and unhealthful, did not appear to explain the association between neighborhood deprivation and BMI in this population of adults with diabetes.

  7. FLANDES, Flange Design for He Circuits by Taylor-Forge Method

    International Nuclear Information System (INIS)

    Pitchford, B.E.

    1977-01-01

    1 - Nature of the physical problem solved: Flange design for helium circuits. 2 - Method of solution: This is a flange design programme based on the Taylor forge method with an additional calculation of flange rotation and bolt load change during the application of internal pressure. The method relates only to the integral hub type of flange, with or without a secondary O-ring seal but will deal also with the flange and cover plate case

  8. Exploring the organizational impact of software-as-a-Service on software vendors the role of organizational integration in software-as-a-Service development and operation

    CERN Document Server

    Stuckenberg, Sebastian

    2014-01-01

    Software-as-a-Service has gained momentum as a software delivery and pricing model within the software industry. Existing practices of software vendors are challenged by a potential paradigm shift. This book analyzes the implications of Software-as-a-Service on software vendors using a business model and value chain perspective. The analysis of qualitative data from software vendors highlights the role of organizational integration within software vendors. By providing insights regarding the impact of Software-as-a-Service on organizational structures and processes of software vendors, this st

  9. Vendor Managed Inventory:Retail Industry Perspective of Malaysia

    OpenAIRE

    Madjlesi Taklimi, Zahra

    2011-01-01

    The concept of Vendor Managed Inventory (VMI) radically changes a traditional inventory management. Under the typical business model, the buyer or retailer is in total control of the timing and volume of the order, in order placing and managing the inventory plan. Whereas VMI is a supply chain initiative where the supplier is responsible for all decisions regarding inventories at the retailers, i.e. under VMI program the supplier is authorized to manage inventories of agreed-upon stock-keepin...

  10. 26 CFR 1.42-6 - Buildings qualifying for carryover allocations.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 1 2010-04-01 2010-04-01 true Buildings qualifying for carryover allocations. 1... INCOME TAXES Credits Against Tax § 1.42-6 Buildings qualifying for carryover allocations. (a) Carryover... carryover allocation may only be made with respect to a qualified building. A qualified building is any...

  11. Design and Optimization of Die Preforming Process for Long Last-stage Blade of Nuclear Power

    Directory of Open Access Journals (Sweden)

    He Xiaomao

    2017-01-01

    Full Text Available The long last-stage blade is a key component of the steam turbine of nuclear conventional island. The die preforming process for a new technology that provides billets for near-net-shape roll-forging process was designed, the effects of the forging temperature, friction coefficient, flash land’s height and die’s outer fillet radius on the die forging force and forging energy were studied by using the orthogonal experiment method, the primary and secondary order of the four factors were analysed by using range analysis method, and the optimal combination of the factors was obtained. By means of numerical simulation and physical experiment, the die preforming process that can provide qualified billets for the subsequent roll-forging process was verified, and the PZS1120f electric screw press can meet the requirements of the die preforming process.

  12. eFORGE : A Tool for Identifying Cell Type-Specific Signal in Epigenomic Data

    NARCIS (Netherlands)

    Breeze, Charles E.; Paul, Dirk S.; van Dongen, Jenny; Butcher, Lee M.; Ambrose, John C.; Barrett, James E.; Lowe, Robert; Rakyan, Vardhman K.; Iotchkova, Valentina; Frontini, Mattia; Downes, Kate; Ouwehand, Willem H.; Laperle, Jonathan; Jacques, Pierre-ETienne; Bourque, Guillaume; Bergmann, Anke K.; Siebert, Reiner; Vellenga, Edo; Saeed, Sadia; Matarese, Filomena; Martens, Joost H. A.; Stunnenberg, Hendrik G.; Teschendorff, Andrew E.; Herrero, Javier; Birney, Ewan; Dunham, Ian; Beck, Stephan

    2016-01-01

    Epigenome-wide association studies (EWAS) provide an alternative approach for studying human disease through consideration of non-genetic variants such as altered DNA methylation. To advance the complex interpretation of EWAS, we developed eFORGE (http://eforge.cs.ucl.ac.uk/), a new stand-alone and

  13. Delayed hydride cracking behavior of Zr-2.5Nb alloy pressure tubes for PHWR700

    Energy Technology Data Exchange (ETDEWEB)

    Sunil, S.; Bind, A.K.; Khandelwal, H.K.; Singh, R.N., E-mail: rnsingh@barc.gov.in; Chakravartty, J.K.

    2015-11-15

    In order to attain improved in-reactor performance few prototypes pressure tubes of Zr-2.5Nb alloy were manufactured by employing forging to break the cast structure and to obtain more homogeneous microstructure. Both double forging and single forging were employed. The forged material was further processed by employing hot extrusion, cold pilgering and autoclaving. A detailed characterization in terms of mechanical properties and microstructure of the prototype tubes were carried for qualifying it for intended use as pressure tubes in PHWR700 reactors. In this work, Delayed Hydride Cracking (DHC) behavior of the forged Zr-2.5Nb pressure tube material characterized in terms of DHC velocity and threshold stress intensity factor associated with DHC (K{sub IH}) was compared with that of conventionally manufactured material in the temperature range of 200–283 °C. Activation energy associated with the DHC in this alloy was found to be ∼60 kJ/mol for the forged materials.

  14. Precipitation-hardening stainless steel bars, shapes, and forgings (ASME SA-564 with additional requirements)

    International Nuclear Information System (INIS)

    1975-05-01

    A standard prescribing requirements for precipitation-hardening stainless steel bars, shapes, and forgings (ASME SA-564 with additional requirements) for nuclear and associated applications is presented. This standard supersedes RDT M 7-6T, dated January 1974. (U.S.)

  15. Research on damage evolution and damage model of 316LN steel during forging

    Energy Technology Data Exchange (ETDEWEB)

    Duan, X.W., E-mail: dxwmike1998@sina.com; Liu, J.S.

    2013-12-20

    The tensile tests and unloading tensile experiments of 316LN steel were conducted. The damage evolution processes were investigated by optical microscope. The fracture was studied using a Scanning Electron Microscope (SEM) and optical microscope, of which, the chemical compositions were analyzed by Energy Dispersive Spectrometer (EDS). The results show that voids nucleate by decohesion of Al{sub 2}O{sub 3} inclusions–matrix interface and mainly along the grain boundary, especially, at triangular grain boundary junctions. The tensile processes were simulated by Deform2D under different deformation conditions. The critical damage values were obtained. The model between the critical damage value, temperature and strain rate was established by regression analysis. A combination of numerical simulation and upsetting experiments was applied for verifying the accuracy and reliability of critical damage value. These damage values can be used to predict the initiation of voids during 316LN steel hot forging. So, they have important instructional effects on designing forging technology of 316LN steel.

  16. Licensee contractor and vendor inspection status report. Quarterly report, October--December 1995

    International Nuclear Information System (INIS)

    1996-02-01

    This periodical covers the results of inspections performed by the NRC's Special Inspection Branch, Vendor Inspection Section, that have been distributed to the inspected organizations during the period from October 1995 through December 1995

  17. Licensee contractor and vendor inspection status report. Quarterly report, October--December 1996

    International Nuclear Information System (INIS)

    1997-03-01

    This periodical covers the results of inspections performed by the NRC's Special Inspection Branch, Vendor Inspection Section, that have been distributed to the inspected organizations during the period from October 1996 through December 1996

  18. Knowledge Attitude And Practice Of Street Food Vendors In Selected Schools Within Bo City Southern Sierra Leone

    Directory of Open Access Journals (Sweden)

    P.T. Lamin-Boima

    2017-12-01

    Full Text Available This paper attempts to investigate the lack of knowledge attitude and practices of street food vendors in Bo the Southern Province of Sierra Leone. A cross sectional study conducted among eighty-seven respondents vendors in forty-four in Bo City. Data was collected using a structured and semi structured questionnaire. The collected data is analysed using a simple descriptive statistics with the help Excel Microsoft ware. A statistical significance was found in relation to knowledge. Attitude towards food safety was negative self-reported practices by Street Food Vendors were statistically significant with low hygiene standards while predisposing factors showed relatively low personal hygiene poor environmental sanitation and low food safety practice. The realize consequences are utmost health risks of consuming street foods as food contamination has caused food borne diseases and outbreaks. It is recommended that standard training be provided for these vendors by the Bo City Council in collaboration with Njala University. It is essential that poor people in a developing country such as Sierra Leone be allowed to earn their livelihood by means of an easy-to-enter business such as street food vending when hygiene standards are sustained.

  19. 26 CFR 1.43-4 - Qualified enhanced oil recovery costs.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 1 2010-04-01 2010-04-01 true Qualified enhanced oil recovery costs. 1.43-4... TAXES Credits Against Tax § 1.43-4 Qualified enhanced oil recovery costs. (a) Qualifying costs—(1) In... “qualified enhanced oil recovery costs” if the amounts are paid or incurred with respect to an asset which is...

  20. Evaluating the Release, Delivery, and Deployment Processes of Eight Large Product Software Vendors applying the Customer Configuration Update Model

    NARCIS (Netherlands)

    Jansen, S.R.L.; Brinkkemper, S.

    2006-01-01

    For software vendors the processes of release, delivery, and deployment to customers are inherently complex. However, software vendors can greatly improve their product quality and quality of service by applying a model that focuses on customer interaction if such a model were available. This

  1. Selection of the optimal hard facing (HF technology of damaged forging dies based on cooling time t8/5

    Directory of Open Access Journals (Sweden)

    D. Arsić

    2016-01-01

    Full Text Available In exploitation, the forging dies are exposed to heating up to very high temperatures, variable loads: compressive, impact and shear. In this paper, the reparatory hard facing of the damaged forging dies is considered. The objective was to establish the optimal reparatory technology based on cooling time t8/5 . The verification of the adopted technology was done by investigation of the hard faced layers microstructure and measurements of hardness within the welded layers’ characteristic zones. Cooling time was determined theoretically, numerically and experimentally.

  2. Increasing of the lifetime of large forging dies by repairwelding

    Science.gov (United States)

    Duchek, M.; Koukolikova, M.; Kotous, J.; Majer, M.

    2018-02-01

    Repair welding is often used for rebuilding discarded or failed forging dies. It saves the cost of new tools. Increased useful life of repaired dies is another motivation for repair welding. This article focuses on the development of new filler materials for this purpose. The main goal was to prolong the life of tools of DIN 1.2714 material. Filler wires of two chemistries were made and several samples were experimentally welded. Metallographic and tribological analyses were carried out.

  3. Use of Gleeble MAXStrain unit for study of damage development in hot forging

    NARCIS (Netherlands)

    Geijselaers, Hubertus J.M.; Wang, Chao; Miroux, A.; Recina, V.; van den Boogaard, Antonius H.; Saanouni, K.

    2016-01-01

    The standard Gleeble MAXStrain unit has been modified to allow axial elongation. Analyses indicate that in this way both positive and negative hydrostatic stresses can be achieved during forging simulations, depending on the amount of strain per hit. This opens the way to the study of the effect of

  4. Reproducibility of quantitative susceptibility mapping in the brain at two field strengths from two vendors.

    Science.gov (United States)

    Deh, Kofi; Nguyen, Thanh D; Eskreis-Winkler, Sarah; Prince, Martin R; Spincemaille, Pascal; Gauthier, Susan; Kovanlikaya, Ilhami; Zhang, Yan; Wang, Yi

    2015-12-01

    To assess the reproducibility of brain quantitative susceptibility mapping (QSM) in healthy subjects and in patients with multiple sclerosis (MS) on 1.5 and 3T scanners from two vendors. Ten healthy volunteers and 10 patients were scanned twice on a 3T scanner from one vendor. The healthy volunteers were also scanned on a 1.5T scanner from the same vendor and on a 3T scanner from a second vendor. Similar imaging parameters were used for all scans. QSM images were reconstructed using a recently developed nonlinear morphology-enabled dipole inversion (MEDI) algorithm with L1 regularization. Region-of-interest (ROI) measurements were obtained for 20 major brain structures. Reproducibility was evaluated with voxel-wise and ROI-based Bland-Altman plots and linear correlation analysis. ROI-based QSM measurements showed excellent correlation between all repeated scans (correlation coefficient R ≥ 0.97), with a mean difference of less than 1.24 ppb (healthy subjects) and 4.15 ppb (patients), and 95% limits of agreements of within -25.5 to 25.0 ppb (healthy subjects) and -35.8 to 27.6 ppb (patients). Voxel-based QSM measurements had a good correlation (0.64 ≤ R ≤ 0.88) and limits of agreements of -60 to 60 ppb or less. Brain QSM measurements have good interscanner and same-scanner reproducibility for healthy and MS subjects, respectively, on the systems evaluated in this study. © 2015 Wiley Periodicals, Inc.

  5. Stress corrosion of low alloy steel forgings

    International Nuclear Information System (INIS)

    Thornton, D.V.; Mould, P.B.; Patrick, E.C.

    1976-01-01

    The catastrophic failure of a steam turbine rotor disc at Hinkley Point 'A' Power station was shown to have been caused by the growth of a stress corrosion crack to critical dimensions. This failure has promoted great interest in the stress corrosion susceptibility of medium strength low alloy steel forgings in steam environments. Consequently, initiation and growth of stress corrosion cracks of typical disc steels have been investigated in steam and also in water at 95 0 C. Cracking has been shown to occur, predominantly in an intergranular manner, with growth rates of between 10 -9 and 10 -7 mm sec. -1 . It is observed that corrosion pitting and oxide penetration prior to the establishment of a stress corrosion crack in the plain samples. (author)

  6. 12 CFR 621.4 - Audit by qualified public accountant.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Audit by qualified public accountant. 621.4... REQUIREMENTS General Rules § 621.4 Audit by qualified public accountant. (a) Each institution shall, at least annually, have its financial statements audited by a qualified public accountant in accordance with...

  7. Experimental and numerical research on forging with torsion

    Science.gov (United States)

    Petrov, Mikhail A.; Subich, Vadim N.; Petrov, Pavel A.

    2017-10-01

    Increasing the efficiency of the technological operations of blank production is closely related to the computer-aided technologies (CAx). On the one hand, the practical result represents reality exactly. On the other hand, the development procedure of new process development demands unrestricted resources, which are limited on the SMEs. The tools of CAx were successfully applied for development of new process of forging with torsion and result analysis as well. It was shown, that the theoretical calculations find the confirmation both in praxis and during numerical simulation. The mostly used constructional materials were under study. The torque angles were stated. The simulated results were evaluated by experimental procedure.

  8. 26 CFR 1.7704-3 - Qualifying income.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 13 2010-04-01 2010-04-01 false Qualifying income. 1.7704-3 Section 1.7704-3 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES General Actuarial Valuations § 1.7704-3 Qualifying income. (a) Certain investment income—(1...

  9. Scaling of an information system in a public healthcare market--infrastructuring from the vendor's perspective.

    Science.gov (United States)

    Johannessen, Liv Karen; Obstfelder, Aud; Lotherington, Ann Therese

    2013-05-01

    The purpose of this paper is to explore the making and scaling of information infrastructures, as well as how the conditions for scaling a component may change for the vendor. The first research question is how the making and scaling of a healthcare information infrastructure can be done and by whom. The second question is what scope for manoeuvre there might be for vendors aiming to expand their market. This case study is based on an interpretive approach, whereby data is gathered through participant observation and semi-structured interviews. A case study of the making and scaling of an electronic system for general practitioners ordering laboratory services from hospitals is described as comprising two distinct phases. The first may be characterized as an evolving phase, when development, integration and implementation were achieved in small steps, and the vendor, together with end users, had considerable freedom to create the solution according to the users' needs. The second phase was characterized by a large-scale procurement process over which regional healthcare authorities exercised much more control and the needs of groups other than the end users influenced the design. The making and scaling of healthcare information infrastructures is not simply a process of evolution, in which the end users use and change the technology. It also consists of large steps, during which different actors, including vendors and healthcare authorities, may make substantial contributions. This process requires work, negotiation and strategies. The conditions for the vendor may change dramatically, from considerable freedom and close relationships with users and customers in the small-scale development, to losing control of the product and being required to engage in more formal relations with customers in the wider public healthcare market. Onerous procurement processes may be one of the reasons why large-scale implementation of information projects in healthcare is difficult

  10. Magnetostriction of heavily deformed Fe–Co binary alloys prepared by forging and cold rolling

    International Nuclear Information System (INIS)

    Yamaura, Shin-ichi; Nakajima, Takashi; Satoh, Takenobu; Ebata, Takashi; Furuya, Yasubumi

    2015-01-01

    Highlights: • The as-forged Fe 25 Co 75 alloy shows the magnetostriction of 108 ppm. • The as-cold rolled Fe 25 Co 75 alloy shows the magnetostriction of 140 ppm. • Magnetostriction of Fe–Co alloy reached the maximum in a single bcc state. • Fcc phase is harmful to the increase in magnetostriction of Fe–Co alloy. • Fcc phase precipitation in Fe–Co alloy can be suppressed by cold rolling. - Abstract: Magnetostriction of Fe 1−x Co x (x = 50–90 at%) alloys prepared by forging and subsequent cold-rolling was studied as functions of alloy compositions and thermomechanical treatments. Magnetostriction of the as-forged Fe 25 Co 75 alloy was 108 ppm and that of the as-cold rolled Fe 25 Co 75 alloy measured parallel to the rolling direction (RD) was 128 ppm. The cold-rolled Fe 25 Co 75 alloy possessed a nearly {1 0 0}<0 1 1> texture, leading to the maximum magnetostriction of 140 ppm when measured at an angle of 45° to RD. Moreover, the fully annealed Fe 25 Co 75 and Fe 20 Co 80 alloys were gradually cold rolled and magnetostriction were measured. Results showed that the magnetostriction of those cold-rolled alloys drastically increased with increasing reduction rate. According to the XRD and TEM observations, intensity of the fcc peak gradually decreased with increasing reduction rate and that the alloys became to be in a bcc single state at a reduction rate higher than 90%, leading to a drastic increase in magnetostriction

  11. Design of the Driving and Clamp Rotation Hydraulic Control System for the Heavy Load Forging Manipulator

    Directory of Open Access Journals (Sweden)

    Li Geqiang

    2015-01-01

    Full Text Available The manipulator was equipped with full hydraulic drive. We designed the hydraulic systems for the driving and clamping rotation. We used a fuzzy PID control strategy to design the electro-hydraulic proportional control system. We built a united simulation model based on the co-simulation of MATLAB/Simulink and AMEsim. A mathematical model of the system was also established. We did separate simulations of the system’s dynamic characteristics for fast forging and normal forging working conditions. The parameters were optimized. The field test shows that the steady-state error of the hydraulic system is small and the system response is fast. The system’s rapid response speed, high precision, and stability under heavy load were realized.

  12. Forging Alliances in Interdisciplinary Rehabilitation Research (FAIRR): A Logic Model.

    Science.gov (United States)

    Gill, Simone V; Khetani, Mary A; Yinusa-Nyahkoon, Leanne; McManus, Beth; Gardiner, Paula M; Tickle-Degnen, Linda

    2017-07-01

    In a patient-centered care era, rehabilitation can benefit from researcher-clinician collaboration to effectively and efficiently produce the interdisciplinary science that is needed to improve patient-centered outcomes. The authors propose the use of the Forging Alliances in Interdisciplinary Rehabilitation Research (FAIRR) logic model to provide guidance to rehabilitation scientists and clinicians who are committed to growing their involvement in interdisciplinary rehabilitation research. We describe the importance and key characteristics of the FAIRR model for conducting interdisciplinary rehabilitation research.

  13. Electro sinter forging of titanium disks

    DEFF Research Database (Denmark)

    Cannella, Emanuele; Nielsen, Chris Valentin; Bay, Niels Oluf

    by measuring the electrical resistance during the sintering process [5], since low electrical resistance corresponds to high density. It is, however, necessary to be aware that increased temperature, on the other hand, increases the resistance. SEM micrographs and Computed Tomography (CT) are carried out......Electro sinter forging (ESF) is a new sintering process based on the principle of electrical Joule heating. In the present work, middle frequency direct current (MFDC) was flowing through the powder compact, which was under mechanical pressure. The main parameters are the high electrical current......, up to 10 kA, and the low voltage, 1-2 V, resulting in heat generation in the powder. Figure 1 shows the experimental setup. The punches were made of a conductive material; namely a copper alloy. The die, which has to be electrically insulating, was made of alumina. The ESF process takes 3-4s...

  14. Licensee contractor and vendor inspection status report: Quarterly report, January 1989--March 1989

    International Nuclear Information System (INIS)

    1989-04-01

    This periodical covers the results of inspection performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organization during the period from January 1989 through March 1989

  15. Licensee contractor and vendor inspection status report: Quarterly report, October 1988--December 1988

    International Nuclear Information System (INIS)

    1989-04-01

    This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organization during the period from October 1988 through December 1988

  16. Accident data study of concrete construction companies' similarities and differences between qualified and non-qualified workers in Spain.

    Science.gov (United States)

    López-Arquillos, Antonio; Rubio-Romero, Juan Carlos; Gibb, Alistair

    2015-01-01

    The aim of this paper is to discuss findings from an analysis of accidents in concrete construction companies in Spain and to compare the accident rates of qualified and non-qualified workers. A total of 125,021 accidents between 2003 and 2008 involving both blue-collar and white-collar workers were analysed, comparing the variables of occupation, age, company staff, length of service, location of the accident, together with the severity of the accidents. Results showed that lack of experience in the first month is more significant in non-qualified workers and experienced supervisors and that head injuries are more likely to lead to fatalities. The most remarkable similarity was that fatal accidents to and from the worksite are a problem common to both groups of workers.

  17. Xenophobic attacks on foreign shop owners and street vendors in Louis Trichardt Central Business District, Limpopo Province

    Directory of Open Access Journals (Sweden)

    Kholofelo Mothibi

    2015-12-01

    Full Text Available Xenophobic attacks in South Africa in 2008 and 2015 sent shockwaves through the country and the world. In these events, around 70 people were killed while thousands were displaced; and, property and products of street vendors and shop owners were destroyed. This phenomenological research project is confined to Louis Trichardt in Limpopo Province wherefrom a cohort of foreign street vendors and shop owners were interviewed. The lived experiences of being verbally and physically abused as well as of some acquaintances being killed, has clearly left them traumatised and living in fear. The article finds that contributory factors to xenophobic attacks experienced by foreign shop owners and street vendors range from competition over scarce resources, stereotypes and inter-group anxiety. Finally, it offers some recommendations about education for South Africans and measured police action.

  18. 26 CFR 52.4682-2 - Qualifying sales.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 17 2010-04-01 2010-04-01 false Qualifying sales. 52.4682-2 Section 52.4682-2... TAXES (CONTINUED) ENVIRONMENTAL TAXES § 52.4682-2 Qualifying sales. (a) In general—(1) Special rules applicable to certain sales. Special rules apply to sales of ODCs in the following cases: (i) Under section...

  19. Manufacturing of ultra-large diameter 20 MnMoNi 5 5 steel forgings for reactor pressure vessels and their properties

    International Nuclear Information System (INIS)

    Onodera, S.; Kawaguchi, S.; Tsukada, H.; Moritani, H.; Suzuki, K.; Sato, I.

    1983-01-01

    A set of component material for PHWR RPV, including the largest forgings ever manufacture so far such as flanges (8,440 mm O.D.), shells and torus (7,960 mm O.D.) and dome (6,800 mm dia. in chord, 460 mm thick), was presented in the outline of manufacturing and properties. Even with increased dimensions and weight than the current largest forgings, the manufacture and the qualities achieved were satisfactory. These results encourage us in further developing PWRs and PHWRs with increased capacity. (orig.)

  20. Licensee contractor and vendor inspection status report. Quarterly report, October 1997--December 1997

    International Nuclear Information System (INIS)

    1998-04-01

    The periodical covers the results of inspections performed between October 1997 and December 1997 by the NRC's Quality Assurance, Vendor Inspection and Maintenance Branch that have been distributed to the inspected organizations