SU-F-J-49: IGRT Credentialing in NCTN Trials

International Nuclear Information System (INIS)

Lowenstein, J; Molineu, A; Followill, D; Al-Hallaq, H; Matuszak, M; Craig, T; Ulin, K; Xiao, Y; Yin, F

2016-01-01

Purpose: To make Image Guided Radiation Therapy (IGRT) credentialing a more unified, consistent and efficient process across the entire National Clinical Trial Network (NCTN). Methods: IGRT plays a role in several advanced NCTN trials. Previously an institution had to be IGRT credentialed for each protocol. When institutions were allowed to use previous credentials for new protocols it was limited to the same disease site as the original credentialing. The credentialing was analyzed by the physics PI of the protocol. We consulted with several of these physicists to determine what is important to consider when reviewing submissions and to learn ways to apply credentialing more broadly. Results: For trials open in 2016, IGRT credentialing can be simplified to cover either boney anatomy or soft tissue. This revised credentialing will cover all disease sites based on the type of anatomy, unless otherwise stated within the protocol. Institutions will submit will complete an online questionnaire about their IGRT procedures. Boney anatomy requirements will include submission of data from 2 sequential fraction of both a patient aligned with boney anatomy and pelvic patient. Soft tissue will require similar submissions for a patient aligned using soft tissue and a pelvic patient. Institutions will only be required to submit the pelvic patient once. Data should be in DICOM format and includes planning CT set, RT structure set, RT plan file, RT dose file, localization images and spatial registration file (if available). Reviews will be done by IROC-Houston staff who will continue to provide feedback to the sites. Conclusion: This revised IGRT credentialing process will bring consistency, a savings in time and effort for both the IROC Houston QA office and to those institutions wanting to be credentialed to participate in NCTN Trials. Sponsored by NIH/NCI CA10953

SU-F-J-49: IGRT Credentialing in NCTN Trials

Energy Technology Data Exchange (ETDEWEB)

Lowenstein, J; Molineu, A; Followill, D [UT MD Anderson Cancer Center, Houston, TX (United States); Al-Hallaq, H [The University of Chicago, Chicago, IL (United States); Matuszak, M [University of Michigan, Ann Arbor, MI (United States); Craig, T [The Princess Margaret Cancer Centre - UHN, Toronto, ON (Canada); Ulin, K [UMass Medical Center, Lincoln, RI (United States); Xiao, Y [University of Pennsylvania, Philadelphia, PA (United States); Yin, F [Duke University Medical Center, Durham, NC (United States)

2016-06-15

Purpose: To make Image Guided Radiation Therapy (IGRT) credentialing a more unified, consistent and efficient process across the entire National Clinical Trial Network (NCTN). Methods: IGRT plays a role in several advanced NCTN trials. Previously an institution had to be IGRT credentialed for each protocol. When institutions were allowed to use previous credentials for new protocols it was limited to the same disease site as the original credentialing. The credentialing was analyzed by the physics PI of the protocol. We consulted with several of these physicists to determine what is important to consider when reviewing submissions and to learn ways to apply credentialing more broadly. Results: For trials open in 2016, IGRT credentialing can be simplified to cover either boney anatomy or soft tissue. This revised credentialing will cover all disease sites based on the type of anatomy, unless otherwise stated within the protocol. Institutions will submit will complete an online questionnaire about their IGRT procedures. Boney anatomy requirements will include submission of data from 2 sequential fraction of both a patient aligned with boney anatomy and pelvic patient. Soft tissue will require similar submissions for a patient aligned using soft tissue and a pelvic patient. Institutions will only be required to submit the pelvic patient once. Data should be in DICOM format and includes planning CT set, RT structure set, RT plan file, RT dose file, localization images and spatial registration file (if available). Reviews will be done by IROC-Houston staff who will continue to provide feedback to the sites. Conclusion: This revised IGRT credentialing process will bring consistency, a savings in time and effort for both the IROC Houston QA office and to those institutions wanting to be credentialed to participate in NCTN Trials. Sponsored by NIH/NCI CA10953.

Functional Credentials

Directory of Open Access Journals (Sweden)

Deuber Dominic

2018-04-01

Full Text Available A functional credential allows a user to anonymously prove possession of a set of attributes that fulfills a certain policy. The policies are arbitrary polynomially computable predicates that are evaluated over arbitrary attributes. The key feature of this primitive is the delegation of verification to third parties, called designated verifiers. The delegation protects the privacy of the policy: A designated verifier can verify that a user satisfies a certain policy without learning anything about the policy itself. We illustrate the usefulness of this property in different applications, including outsourced databases with access control. We present a new framework to construct functional credentials that does not require (non-interactive zero-knowledge proofs. This is important in settings where the statements are complex and thus the resulting zero-knowledge proofs are not efficient. Our construction is based on any predicate encryption scheme and the security relies on standard assumptions. A complexity analysis and an experimental evaluation confirm the practicality of our approach.

Expecting the Unexpected: Towards Robust Credential Infrastructure

Science.gov (United States)

Xu, Shouhuai; Yung, Moti

Cryptographic credential infrastructures, such as Public key infrastructure (PKI), allow the building of trust relationships in electronic society and electronic commerce. At the center of credential infrastructures is the methodology of digital signatures. However, methods that assure that credentials and signed messages possess trustworthiness and longevity are not well understood, nor are they adequately addressed in both literature and practice. We believe that, as a basic engineering principle, these properties have to be built into the credential infrastructure rather than be treated as an after-thought since they are crucial to the long term success of this notion. In this paper we present a step in the direction of dealing with these issues. Specifically, we present the basic engineering reasoning as well as a model that helps understand (somewhat formally) the trustworthiness and longevity of digital signatures, and then we give basic mechanisms that help improve these notions.

Credentialing of practitioners of botanical medicine.

Science.gov (United States)

Yarnell, Eric; Abascal, Kathy; Greenfield, Russell Howard; Romm, Aviva; Sudberg, Sidney

2002-01-01

This article discusses how practitioners, regardless of other professional licenses they may hold, could be credentialed in botanical medicine. The article reviews the field of clinical botanical medicine and the history and modern status of botanical medicine, as well as organizations currently involved in botanical medicine credentialing. Many different types of professionals prescribe botanical medicines, and the potential for collaboration among them is great. The current trend treats botanical medicine as a narrow subdivision of allopathic medicine and does not acknowledge the breadth, depth, and diversity of botanical medicine and ultimately will not provide maximum benefits for patients. An alternative approach that instead credentials practitioners skilled in the use of a wide variety of botanical medicines in a responsible, scientific fashion is presented.

Credential Application Awaiting Information

Data.gov (United States)

Department of Homeland Security — When a Credential application or required documentation is incomplete, an Awaiting Information letter is issued. The application process cannot continue until all...

Setting Course: The Case for the Credentialing of Forensic Interviewers

Science.gov (United States)

Haney, Mike; Vieth, Victor I.; Campos, Hector M.

2010-01-01

The article provides a history of efforts to develop a credentialing or certification process for forensic interviewers and reviews the multitiered credentialing process offered by the National Association of Certified Child Forensic Interviewers. The authors argue the benefits of a credentialing process for forensic interviewers and respond to…

Keystroke Dynamics-Based Credential Hardening Systems

Science.gov (United States)

Bartlow, Nick; Cukic, Bojan

abstract Keystroke dynamics are becoming a well-known method for strengthening username- and password-based credential sets. The familiarity and ease of use of these traditional authentication schemes combined with the increased trustworthiness associated with biometrics makes them prime candidates for application in many web-based scenarios. Our keystroke dynamics system uses Breiman’s random forests algorithm to classify keystroke input sequences as genuine or imposter. The system is capable of operating at various points on a traditional ROC curve depending on application-specific security needs. As a username/password authentication scheme, our approach decreases the system penetration rate associated with compromised passwords up to 99.15%. Beyond presenting results demonstrating the credential hardening effect of our scheme, we look into the notion that a user’s familiarity to components of a credential set can non-trivially impact error rates.

The Need for National Credentialing Standards for Addiction Counselors

Science.gov (United States)

Miller, Geri; Scarborough, Jim; Clark, Catherine; Leonard, Justin C.; Keziah, Tyler B.

2010-01-01

The authors review the current state of credentialing for addiction counselors in the United States and provide recommendations to the addiction counseling field regarding national standards for credentialing.

SU-E-P-02: Imaging and Radiation Oncology Core (IROC) Houston QA Center (RPC) Credentialing

International Nuclear Information System (INIS)

Amador, C; Keith, T; Nguyen, T; Molineu, A; Followill, D

2014-01-01

Purpose: To provide information pertaining to IROC Houston QA Center's (RPC) credentialing process for institutions participating in NCI-sponsored clinical trials. Methods: IROC Houston issues credentials for NCI sponsored study groups. Requirements for credentialing might include any combination of questionnaires, knowledge assessment forms, benchmarks, or phantom irradiations. Credentialing requirements for specific protocols can be found on IROC Houston's website (irochouston.mdanderson.org). The website also houses the credentialing status inquiry (CSI) form. Once an institution has reviewed the protocol's credentialing requirements, a CSI form should be completed and submitted to IROC Houston. This form is used both to request whether requirements have been met as well as to notify IROC Houston that the institution requests credentialing for a specific protocol. IROC Houston will contact the institution to discuss any delinquent requirements. Once the institution has met all requirements IROC Houston issues a credentialing letter to the institution and will inform study groups and other IROC offices of the credentials. Institutions can all phone the IROC Houston office to initiate credentialing or ask any credentialing related questions. Results: Since 2010 IROC has received 1313 credentialing status inquiry forms. We received 317 in 2010, 266 in 2011, 324 in 2012, and 406 in 2013. On average we receive 35 phone calls per week with multiple types of credentialing questions. Decisions regarding credentialing status are based on the protocol specifications and previous completed credentialing by the institution. In some cases, such as for general IMRT credentialing, up to 5 sites may be credentialed based on the credentialing of one main center. Each of these situations is handled individually. Conclusion: IROC Houston will issue radiation therapy credentials for the NCI trials in the National Clinical Trials Network. Credentialing requirements and the CSI form

SU-E-P-02: Imaging and Radiation Oncology Core (IROC) Houston QA Center (RPC) Credentialing

Energy Technology Data Exchange (ETDEWEB)

Amador, C; Keith, T; Nguyen, T; Molineu, A; Followill, D [UT MD Anderson Cancer Center, Houston, TX (United States)

2014-06-01

Purpose: To provide information pertaining to IROC Houston QA Center's (RPC) credentialing process for institutions participating in NCI-sponsored clinical trials. Methods: IROC Houston issues credentials for NCI sponsored study groups. Requirements for credentialing might include any combination of questionnaires, knowledge assessment forms, benchmarks, or phantom irradiations. Credentialing requirements for specific protocols can be found on IROC Houston's website (irochouston.mdanderson.org). The website also houses the credentialing status inquiry (CSI) form. Once an institution has reviewed the protocol's credentialing requirements, a CSI form should be completed and submitted to IROC Houston. This form is used both to request whether requirements have been met as well as to notify IROC Houston that the institution requests credentialing for a specific protocol. IROC Houston will contact the institution to discuss any delinquent requirements. Once the institution has met all requirements IROC Houston issues a credentialing letter to the institution and will inform study groups and other IROC offices of the credentials. Institutions can all phone the IROC Houston office to initiate credentialing or ask any credentialing related questions. Results: Since 2010 IROC has received 1313 credentialing status inquiry forms. We received 317 in 2010, 266 in 2011, 324 in 2012, and 406 in 2013. On average we receive 35 phone calls per week with multiple types of credentialing questions. Decisions regarding credentialing status are based on the protocol specifications and previous completed credentialing by the institution. In some cases, such as for general IMRT credentialing, up to 5 sites may be credentialed based on the credentialing of one main center. Each of these situations is handled individually. Conclusion: IROC Houston will issue radiation therapy credentials for the NCI trials in the National Clinical Trials Network. Credentialing requirements

Credentialism among Graduate Students.

Science.gov (United States)

Stodt, Martha McGinty; Thielens, Wagner, Jr.

1985-01-01

An exploratory study of students entering four elite fields found that most sought both credentials and competence. Stiff competition within chosen occupations led the majority of students to seek every advantage that graduate education could provide. (Author/MLW)

Moral Credentialing and the Rationalization of Misconduct

Science.gov (United States)

Brown, Ryan P.; Tamborski, Michael; Wang, Xiaoqian; Barnes, Collin D.; Mumford, Michael D.; Connelly, Shane; Devenport, Lynn D.

2010-01-01

Recent studies lead to the paradoxical conclusion that the act of affirming one’s egalitarian or pro-social values and virtues might subsequently facilitate prejudiced or self-serving behavior, an effect previously referred to as “moral credentialing.” The present study extends this paradox to the domain of academic misconduct and investigates the hypothesis that such an effect might be limited by the extent to which misbehavior is rationalizable. Using a paradigm designed to investigate deliberative and rationalized forms of cheating (von Hippel, Lakin, & Shakarchi, 2005), we found that when participants had credentialed themselves (versus a non-close acquaintance) via a set of hypothetical moral dilemmas, they were more likely to cheat on a subsequent math task, but only if cheating was highly rationalizable. When cheating was difficult to rationalize, moral credentialing had almost no impact on cheating. PMID:21503267

Credentials of delegates to the 6. regular session. (b) Report of the Credentials Committee

International Nuclear Information System (INIS)

1962-01-01

Argentina Philippines Australia Iraq Bulgaria Union of Soviet Socialist Republics El Salvador United States of America Lebanon 2. The Credentials Committee held a meeting on 24 September 1962 at which russia

A multi-national report on methods for institutional credentialing for spine radiosurgery

International Nuclear Information System (INIS)

Gerszten, Peter C; Shin, John H; Winey, Brian; Oh, Kevin; Sweeney, Reinhart A; Guckenberger, Matthias; Sahgal, Arjun; Sheehan, Jason P; Kersh, Ronald; Chen, Stephanie; Flickinger, John C; Quader, Mubina; Fahim, Daniel; Grills, Inga

2013-01-01

Stereotactic body radiotherapy and radiosurgery are rapidly emerging treatment options for both malignant and benign spine tumors. Proper institutional credentialing by physicians and medical physicists as well as other personnel is important for the safe and effective adoption of spine radiosurgery. This article describes the methods for institutional credentialing for spine radiosurgery at seven highly experienced international institutions. All institutions (n = 7) are members of the Elekta Spine Radiosurgery Research Consortium and have a dedicated research and clinical focus on image-guided spine radiosurgery. A questionnaire consisting of 24 items covering various aspects of institutional credentialing for spine radiosurgery was completed by all seven institutions. Close agreement was observed in most aspects of spine radiosurgery credentialing at each institution. A formal credentialing process was believed to be important for the implementation of a new spine radiosurgery program, for patient safety and clinical outcomes. One institution has a written policy specific for spine radiosurgery credentialing, but all have an undocumented credentialing system in place. All institutions rely upon an in-house proctoring system for the training of both physicians and medical physicists. Four institutions require physicians and medical physicists to attend corporate sponsored training. Two of these 4 institutions also require attendance at a non-corporate sponsored academic society radiosurgery course. Corporate as well as non-corporate sponsored training were believed to be complimentary and both important for training. In 5 centers, all cases must be reviewed at a multidisciplinary conference prior to radiosurgery treatment. At 3 centers, neurosurgeons are not required to be involved in all cases if there is no evidence for instability or spinal cord compression. Backup physicians and physicists are required at only 1 institution, but all institutions have more

CERN, AFS and PLUS credentials converge into one single credential pair

CERN Multimedia

IT Department

2008-01-01

Over the past few years the IT department has been streamlining CERN users’ access to all central computing services. For each user, the long term goal is to converge on a single CERN Account with a unique credential pair (username and password). This strategy will make IT services more coherent and thus easier for users to understand. It will also simplify account maintenance and give a central point of control where security measures can be applied. As the next step of this process, on the 1st July 2008 your CERN, PLUS and AFS accounts will converge into one single CERN Account. From then on the Account names will already be unique and universal. The passwords will become unique and universal after the first password change, which users are encouraged to do at their earliest convenience. Until then the existing passwords will remain valid on each individual service, but afterwards the new credentials will become truly common to all 3 services. Thus, starting on 1st July 2008, changing the password for PL...

CERN, AFS and PLUS credentials converge into a single credential pair

CERN Multimedia

IT Department

2008-01-01

Over the past few years the IT Department has been streamlining CERN users’ access to all central computing services. For each user, the long-term goal is to converge on a single CERN account with a unique credential pair (username and password). This strategy will make IT services more coherent and thus easier for users to understand. It will also simplify account maintenance and provide a central point of control where security measures can be applied. As the next step of this process, on 1st July 2008 your CERN, PLUS and AFS accounts will converge into a single CERN Account. From then on the account names will be unique and universal. The passwords will become unique and universal after the first password change, which users are encouraged to make at their earliest convenience. Until then the existing passwords will remain valid on each individual service, but afterwards the new credentials will become truly common to all 3 services. Thus, starting on 1st July 2008, changing the password for PLUS or AFS...

14 CFR 121.548 - Aviation safety inspector's credentials: Admission to pilot's compartment.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Aviation safety inspector's credentials... Operations § 121.548 Aviation safety inspector's credentials: Admission to pilot's compartment. Whenever, in... presents form FAA 110A, “Aviation Safety Inspector's Credential,” to the pilot in command of an aircraft...

Microprocessor-controlled tester for evaluation of the Self-Energized Credential System (SECS)

International Nuclear Information System (INIS)

Corlis, N.E.

1980-03-01

The Self-Energized Credential System (SECS) was developed for use in the Plutonium Protection System (PPS) installed at Hanford, Washington. Evaluation and development of the SECS system was enhanced by the use of a microprocessor-controlled portal tester. This tester used infrared (ir) beam sensors to provide information on the direction of travel of the credential wearer and to detect inoperative credentials. A printed record of the portal number, actual code read, time, and direction of the credential passage provided information essential to an assessment of the operability of the SECS

Secondary school teachers' attitudes towards and beliefs about ability grouping.

Science.gov (United States)

Hallam, Susan; Ireson, Judith

2003-09-01

Internationally and historically considerable research has been undertaken regarding the attitudes of secondary school teachers towards different types of ability grouping. There has been no recent research taking account of the changing educational context in the UK. This paper aims to explore secondary school teachers' attitudes and beliefs about ability grouping taking account of school type, gender, experience and qualifications. The sample comprised over 1,500 teachers from 45 schools divided into three groups based on their ability grouping practices in years 7-9 (the students were aged 11-14). The sample included all the lower school teachers of mathematics, science and English and a random sample of teachers from other subjects in each school. Teachers responded to a questionnaire which explored their attitudes towards ability grouping through the use of rating scales and open-ended questions. The findings showed that the teachers' beliefs broadly reflected research findings on the actual effects of ability grouping, although there were significant differences relating to the type of school they taught in and the subject that they taught. Separate analysis of school types showed that length of time teaching, individual school differences and teacher qualifications were also significant predictors of attitudes. Teachers' beliefs about ability grouping are influenced by the type of groupings adopted in the school where they work, the subject that they teach, their experience and qualifications. As pedagogical practices are known to be influenced by beliefs these findings have important implications for teacher training.

WE-AB-BRA-07: Quantitative Evaluation of 2D-2D and 2D-3D Image Guided Radiation Therapy for Clinical Trial Credentialing, NRG Oncology/RTOG

Energy Technology Data Exchange (ETDEWEB)

Giaddui, T; Yu, J; Xiao, Y [Thomas Jefferson University, Philadelphia, PA (United States); Jacobs, P [MIM Software, Inc, Cleavland, Ohio (United States); Manfredi, D; Linnemann, N [IROC Philadelphia, RTQA Center, Philadelphia, PA (United States)

2015-06-15

Purpose: 2D-2D kV image guided radiation therapy (IGRT) credentialing evaluation for clinical trial qualification was historically qualitative through submitting screen captures of the fusion process. However, as quantitative DICOM 2D-2D and 2D-3D image registration tools are implemented in clinical practice for better precision, especially in centers that treat patients with protons, better IGRT credentialing techniques are needed. The aim of this work is to establish methodologies for quantitatively reviewing IGRT submissions based on DICOM 2D-2D and 2D-3D image registration and to test the methodologies in reviewing 2D-2D and 2D-3D IGRT submissions for RTOG/NRG Oncology clinical trials qualifications. Methods: DICOM 2D-2D and 2D-3D automated and manual image registration have been tested using the Harmony tool in MIM software. 2D kV orthogonal portal images are fused with the reference digital reconstructed radiographs (DRR) in the 2D-2D registration while the 2D portal images are fused with DICOM planning CT image in the 2D-3D registration. The Harmony tool allows alignment of the two images used in the registration process and also calculates the required shifts. Shifts calculated using MIM are compared with those submitted by institutions for IGRT credentialing. Reported shifts are considered to be acceptable if differences are less than 3mm. Results: Several tests have been performed on the 2D-2D and 2D-3D registration. The results indicated good agreement between submitted and calculated shifts. A workflow for reviewing these IGRT submissions has been developed and will eventually be used to review IGRT submissions. Conclusion: The IROC Philadelphia RTQA center has developed and tested a new workflow for reviewing DICOM 2D-2D and 2D-3D IGRT credentialing submissions made by different cancer clinical centers, especially proton centers. NRG Center for Innovation in Radiation Oncology (CIRO) and IROC RTQA center continue their collaborative efforts to enhance

WE-AB-BRA-07: Quantitative Evaluation of 2D-2D and 2D-3D Image Guided Radiation Therapy for Clinical Trial Credentialing, NRG Oncology/RTOG

International Nuclear Information System (INIS)

Giaddui, T; Yu, J; Xiao, Y; Jacobs, P; Manfredi, D; Linnemann, N

2015-01-01

Purpose: 2D-2D kV image guided radiation therapy (IGRT) credentialing evaluation for clinical trial qualification was historically qualitative through submitting screen captures of the fusion process. However, as quantitative DICOM 2D-2D and 2D-3D image registration tools are implemented in clinical practice for better precision, especially in centers that treat patients with protons, better IGRT credentialing techniques are needed. The aim of this work is to establish methodologies for quantitatively reviewing IGRT submissions based on DICOM 2D-2D and 2D-3D image registration and to test the methodologies in reviewing 2D-2D and 2D-3D IGRT submissions for RTOG/NRG Oncology clinical trials qualifications. Methods: DICOM 2D-2D and 2D-3D automated and manual image registration have been tested using the Harmony tool in MIM software. 2D kV orthogonal portal images are fused with the reference digital reconstructed radiographs (DRR) in the 2D-2D registration while the 2D portal images are fused with DICOM planning CT image in the 2D-3D registration. The Harmony tool allows alignment of the two images used in the registration process and also calculates the required shifts. Shifts calculated using MIM are compared with those submitted by institutions for IGRT credentialing. Reported shifts are considered to be acceptable if differences are less than 3mm. Results: Several tests have been performed on the 2D-2D and 2D-3D registration. The results indicated good agreement between submitted and calculated shifts. A workflow for reviewing these IGRT submissions has been developed and will eventually be used to review IGRT submissions. Conclusion: The IROC Philadelphia RTQA center has developed and tested a new workflow for reviewing DICOM 2D-2D and 2D-3D IGRT credentialing submissions made by different cancer clinical centers, especially proton centers. NRG Center for Innovation in Radiation Oncology (CIRO) and IROC RTQA center continue their collaborative efforts to enhance

Credentialing for participation in clinical trials

International Nuclear Information System (INIS)

Followill, David S.; Urie, Marcia; Galvin, James M.; Ulin, Kenneth; Xiao, Ying; FitzGerald, Thomas J.

2012-01-01

The National Cancer Institute (NCI) clinical cooperative groups have been instrumental over the past 50 years in developing clinical trials and evidence-based clinical trial processes for improvements in patient care. The cooperative groups are undergoing a transformation process to launch, conduct, and publish clinical trials more rapidly. Institutional participation in clinical trials can be made more efficient and include the expansion of relationships with international partners. This paper reviews the current processes that are in use in radiation therapy trials and the importance of maintaining effective credentialing strategies to assure the quality of the outcomes of clinical trials. The paper offers strategies to streamline and harmonize credentialing tools and processes moving forward as the NCI undergoes transformative change in the conduct of clinical trials.

Credentialing for participation in clinical trials

Energy Technology Data Exchange (ETDEWEB)

Followill, David S. [Radiological Physics Center, Department of Radiation Physics, University of Texas MD Anderson Cancer Center, Houston, TX (United States); Urie, Marcia [Quality Assurance Review Center, Department of Radiation Oncology, University of Massachusetts Medical School, Lincoln, RI (United States); Galvin, James M. [Department of Radiation Oncology, Jefferson Medical College, Thomas Jefferson University, Philadelphia, PA (United States); Radiation Therapy Oncology Group, Philadelphia, PA (United States); Ulin, Kenneth [Quality Assurance Review Center, Department of Radiation Oncology, University of Massachusetts Medical School, Lincoln, RI (United States); Department of Radiation Oncology, University of Massachusetts Medical School, Worcester, MA (United States); Xiao, Ying [Department of Radiation Oncology, Jefferson Medical College, Thomas Jefferson University, Philadelphia, PA (United States); Radiation Therapy Oncology Group, Philadelphia, PA (United States); FitzGerald, Thomas J., E-mail: dfollowi@mdanderson.org [Quality Assurance Review Center, Department of Radiation Oncology, University of Massachusetts Medical School, Lincoln, RI (United States); Department of Radiation Oncology, University of Massachusetts Medical School, Worcester, MA (United States)

2012-12-26

The National Cancer Institute (NCI) clinical cooperative groups have been instrumental over the past 50 years in developing clinical trials and evidence-based clinical trial processes for improvements in patient care. The cooperative groups are undergoing a transformation process to launch, conduct, and publish clinical trials more rapidly. Institutional participation in clinical trials can be made more efficient and include the expansion of relationships with international partners. This paper reviews the current processes that are in use in radiation therapy trials and the importance of maintaining effective credentialing strategies to assure the quality of the outcomes of clinical trials. The paper offers strategies to streamline and harmonize credentialing tools and processes moving forward as the NCI undergoes transformative change in the conduct of clinical trials.

IVOA Credential Delegation Protocol Version 1.0

Science.gov (United States)

Plante, Raymond; Graham, Matthew; Rixon, Guy; Taffoni, Giuliano; Plante, Raymond; Graham, Matthew

2010-02-01

The credential delegation protocol allows a client program to delegate a user's credentials to a service such that that service may make requests of other services in the name of that user. The protocol defines a REST service that works alongside other IVO services to enable such a delegation in a secure manner. In addition to defining the specifics of the service protocol, this document describes how a delegation service is registered in an IVOA registry along with the services it supports. The specification also explains how one can determine from a service registration that it requires the use of a supporting delegation service.

Validation of non-formal and informal learning from a European perspective – linking validation arrangements with national qualifications frameworks

Directory of Open Access Journals (Sweden)

Borut Mikulec

2015-12-01

Full Text Available The paper analyses European policy on the validation of non-formal and informal learning, which is presented as a “salvation narrative” that can improve the functioning of the labour market, provide a way out from unemployment and strengthen the competitiveness of the economy. Taking as our starting point recent findings in adult education theory on the validation of non-formal and informal learning, we aim to prove the thesis that what European validation policy promotes is above all economic purpose and that it establishes a “Credential/Credit-exchange” model of validation of non-formal and informal learning. We proceed to ecxamine the effect of European VNIL policy in selected European countries where validation arrangements are linked to the qualifications framework. We find that the “Credential/ Credit-exchange” validation model was first established in a few individual European countries and then transferred, as a “successful” model, to the level of common European VNIL policy.

Credentialism in Our Ignorant Society.

Science.gov (United States)

Marien, Michael

All societies have procedures for selecting who will occupy important positions. The use of credentials characterizes our system of social selection, and our worship of them has created the following problems: an artificial demand for education, artificial restraints to learning, the overlooking of obsolescence, generational inversion (wherein the…

WE-E-304-01: SBRT Credentialing: Understanding the Process From Inquiry to Approval

International Nuclear Information System (INIS)

Followill, D.

2015-01-01

SBRT is having a dramatic impact on radiation therapy of early-stage, locally advanced cancers. A number of national protocols have been and are being developed to assess the clinical efficacy of SBRT for various anatomical sites, such as lung and spine. Physics credentialing for participating and implementation of trial protocols involve a broad spectrum of requirements from image guidance, motion management, to planning technology and dosimetric constrains. For radiation facilities that do not have extensive experiences in SBRT treatment and protocol credentialing, these complex processes of credentialing and implementation could be very challenging and, sometimes, may lead to ineffective even unsuccessful execution of these processes. In this proposal, we will provide comprehensive review of some current SBRT protocols, explain the requirements and their underline rationales, illustrate representative failed and successful experiences, related to SBRT credentialing, and discuss strategies for effective SBRT credentialing and implementation. Learning Objectives: Understand requirements and challenges of SBRT credentailing and implentation Discuss processes and strategies of effective SBRT credentailing Discuss practical considerations, potential pitfalls and solutions of SBRT implentation

WE-E-304-01: SBRT Credentialing: Understanding the Process From Inquiry to Approval

Energy Technology Data Exchange (ETDEWEB)

Followill, D. [UT MD Anderson Cancer Center (United States)

2015-06-15

SBRT is having a dramatic impact on radiation therapy of early-stage, locally advanced cancers. A number of national protocols have been and are being developed to assess the clinical efficacy of SBRT for various anatomical sites, such as lung and spine. Physics credentialing for participating and implementation of trial protocols involve a broad spectrum of requirements from image guidance, motion management, to planning technology and dosimetric constrains. For radiation facilities that do not have extensive experiences in SBRT treatment and protocol credentialing, these complex processes of credentialing and implementation could be very challenging and, sometimes, may lead to ineffective even unsuccessful execution of these processes. In this proposal, we will provide comprehensive review of some current SBRT protocols, explain the requirements and their underline rationales, illustrate representative failed and successful experiences, related to SBRT credentialing, and discuss strategies for effective SBRT credentialing and implementation. Learning Objectives: Understand requirements and challenges of SBRT credentailing and implentation Discuss processes and strategies of effective SBRT credentailing Discuss practical considerations, potential pitfalls and solutions of SBRT implentation.

Patient credentialing as a population health management strategy: a diabetes case study.

Science.gov (United States)

Watson, Lindsay L; Bluml, Benjamin M; Skoufalos, Alexandria

2015-06-01

When given the opportunity to become actively involved in the decision-making process, patients can positively impact their health outcomes. Understanding how to empower patients to become informed consumers of health care services is an important strategy for addressing disparities and variability in care. Patient credentialing identifies people who have a certain diagnosis and have achieved certain levels of competency in understanding and managing their disease. Patient credentialing was developed to meet 3 core purposes: (1) enhance patient engagement by increasing personal accountability for health outcomes, (2) create a mass customization strategy for providers to deliver high-quality, patient-centered collaborative care, and (3) provide payers with a foundation for properly aligning health benefit incentives. The Patient Self-Management Credential for Diabetes, a first-of-its-kind, psychometrically validated tool, has been deployed within 3 practice-based research initiatives as a component of innovative diabetes care. Results from these projects show improved clinical outcomes, reduced health care costs, and a relationship between credential achievement levels and clinical markers of diabetes. Implementing patient credentialing as part of collaborative care delivered within various settings across the health care system may be an effective way to reduce disparities, improve access to care and appropriate treatments, incentivize patient engagement in managing their health, and expend time and resources in a customized way to meet individual needs.

Redefining commercial vehicle permitting and credentialing violations.

Science.gov (United States)

2015-08-01

The objective of this study was to analyze enforcement and adjudication of common commercial vehicle tax, credentialing, and safety offenses. This study examined violations of the International Fuel Tax Agreement and the Kentucky Intrastate Tax, Kent...

Discovering Authentication Credentials in Volatile Memory of Android Mobile Devices

OpenAIRE

Apostolopoulos , Dimitris; Marinakis , Giannis; Ntantogian , Christoforos; Xenakis , Christos

2013-01-01

Part 5: Adoption Issues in e/m-Services; International audience; This paper investigates whether authentication credentials in the volatile memory of Android mobile devices can be discovered using freely available tools. The experiments that we carried out for each application included two different sets: In the first set, our goal was to check if we could recover our own submitted credentials from the memory dump of the mobile device. In the second set of experiments, the goal was to find pa...

Impact of Nuclear Laboratory Personnel Credentials & Continuing Education on Nuclear Cardiology Laboratory Quality Operations.

Science.gov (United States)

Malhotra, Saurabh; Sobieraj, Diana M; Mann, April; Parker, Matthew W

2017-12-22

Background/Objectives: The specific credentials and continuing education (CME/CE) of nuclear cardiology laboratory medical and technical staff are important factors in the delivery of quality imaging services that have not been systematically evaluated. Methods: Nuclear cardiology accreditation application data from the Intersocietal Accreditation Commission (IAC) was used to characterize facilities performing myocardial perfusion imaging by setting, size, previous accreditation and credentials of the medical and technical staff. Credentials and CME/CE were compared against initial accreditation decisions (grant or delay) using multivariable logistic regression. Results: Complete data were available for 1913 nuclear cardiology laboratories from 2011-2014. Laboratories with initial positive accreditation decisions had a greater prevalence of Certification Board in Nuclear Cardiology (CBNC) certified medical directors and specialty credentialed technical directors. Certification and credentials of the medical and technical directors, respectively, staff CME/CE compliance, and assistance of a consultant with the application were positively associated with accreditation decisions. Conclusion: Nuclear cardiology laboratories directed by CBNC-certified physicians and NCT- or PET-credentialed technologists were less likely to receive delay decisions for MPI. CME/CE compliance of both the medical and technical directors was associated with accreditation decision. Medical and technical directors' years of experience were not associated with accreditation decision. Copyright © 2017 by the Society of Nuclear Medicine and Molecular Imaging, Inc.

Credentialism: Why We Have Diploma Mills.

Science.gov (United States)

Arnstein, George

1982-01-01

The demand for credentials and college degrees in the United States has spawned the establishment of many degree-granting institutions that are nothing more than diploma mills. Despite some indicators of institutional quality, such as accreditation and state licensing, the identification of substandard colleges is not always an easy task. (WD)

The Impact of Consumer Credentialism on Employee and Entrepreneur Returns to Higher Education.

Science.gov (United States)

Tucker, Irvin B., III

1987-01-01

Examines the relative importance of education credentials in consumer perceptions of self-employed business people. Using 1980 national cross-sectional data on goods- and service-producing occupations, the regression analysis shows that highly educated entrepreneurs are not influenced by consumer credentialism. Includes 17 references. (MLH)

Improving patient safety and physician accountability using the hospital credentialing process

OpenAIRE

Forster, Alan J; Turnbull, Jeff; McGuire, Shaun; Ho, Michael L; Worthington, JR

2011-01-01

Abstract The lack of systematic oversight of physician performance has led to some serious cases related to physician competence and behaviour. We are currently implementing a hospital-wide approach to improve physician oversight by incorporating it into the hospital credentialing process. Our proposed credentialing method involves four systems: (1) a system for monitoring and reporting clinical performance; (2) a system for evaluating physician behaviour; (3) a complaints management system; ...

Military Personnel: Performance Measures Needed to Determine How Well DOD’s Credentialing Program Helps Servicemembers

Science.gov (United States)

2016-10-01

MILITARY PERSONNEL Performance Measures Needed to Determine How Well DOD’s Credentialing Program Helps Servicemembers...Measures Needed to Determine How Well DOD’s Credentialing Program Helps Servicemembers What GAO Found The Department of Defense (DOD) has taken steps to...establish the statutorily required credentialing program, but it has not developed performance measures to gauge the program’s effectiveness

Rising returns to schooling in Argentina, 1992-2002 : productivity or credentialism?

OpenAIRE

Savanti, Maria Paula; Patrinos, Harry Anthony

2005-01-01

There has not been much change in the premium to primary education, while the returns to secondary education increased, but by less than the premium to university. The returns to incomplete university also increased significantly. There is a signal that there might be credentialism at the tertiary level, but 15 years of schooling also represents a significant threshold. The returns to schooling are higher in the private sector. There is little evidence of screening or credentialism driving th...

The Australian Skills Agenda: Productivity versus Credentialism?

Science.gov (United States)

Ashenden, Dean

1992-01-01

Discusses the rise of the concept of improved skills recognition in Australian industry. Highlights include the role of industrial relations; the Australian vocational education and training system; recognition, industrial relations, and workplace change; career and training paths; credentials; and future prospects. (10 references) (LRW)

UN: new Permanent Representative of Monaco presents credentials

CERN Multimedia

2003-01-01

"Michel Borghini, the new Permanent Representative of Monaco to the United Nations, presented his credentials to Secretary-General Kofi Annan today. He worked as a researcher at CERN from 1965 to 1969" (1/3 page).

Credentialism: Partners for Business Education. Working Papers of Planning and Development Research 90-6.

Science.gov (United States)

Protz, Maria

This study examined the current value of credentialism, extending the findings of an earlier report, "Business Training: Content, Enrollment and Delivery." The study acknowledged the distinction between various types of credentials, but focused primarily on professional business certification and investigated the potential for TVOntario…

Credentialing in Out-of-School Time Programs: A Discussion Paper. Making the MOST of Out-of-School Time.

Science.gov (United States)

Morgan, Gwen G.

This discussion paper provides background information on credentialing, raises issues in the area of credentialing for out-of-school time programs, and suggests the important decisions that need to evolve in the out-of-school time field. The first part of the paper defines credentials, describes traditional and changing concepts of credentialing…

Credentialing Public Health Nurses: Current Issues and Next Steps Forward.

Science.gov (United States)

Vandenhouten, Christine L; DeVance-Wilson, Crystal L; Little, Barbara Battin

2015-01-01

The purpose of this descriptive, cross-sectional study was to identify Public Health Nurses' (PHN) perceived motivators and barriers to seeking PHN board certification. In collaboration with the Quad Council of Public Health Nursing Organizations, PHNs from across the United States were invited to complete the PHN Certification Survey, a 14-item online questionnaire. A total of 912 surveys were completed. PHNs were motivated to seek PHN board certification by three overarching categories: professional competence, personal satisfaction, and financial incentives. Frequently cited barriers to certification were lack of knowledge of certification opportunities, being unaware of eligibility criteria, cost, perceived lack of value/reward by employer, and preparation time. Demonstrating a highly educated, competent, and reliable PHN workforce can only be achieved through ongoing professional development and credentialing. PH stakeholders (i.e., PHN organizations, employers, PHNs, etc.) need a strategic approach to address the main barriers to certification identified in this study (a) awareness of certification and eligibility criteria, and (b) recognition of the credential by employers. In addition, research on the relationship between PHN credentialing and population health outcomes is essential. © 2015 Wiley Periodicals, Inc.

21 CFR 1311.110 - Requirements for obtaining an authentication credential-Individual practitioners eligible to use...

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Requirements for obtaining an authentication... Prescriptions § 1311.110 Requirements for obtaining an authentication credential—Individual practitioners... credentialing office) may conduct identity proofing and authorize the issuance of the authentication credential...

SU-E-CAMPUS-J-04: Image Guided Radiation Therapy (IGRT): Review of Technical Standards and Credentialing in Radiotherapy Clinical Trials

International Nuclear Information System (INIS)

Giaddui, T; Chen, W; Yu, J; Gong, Y; Galvin, J; Xiao, Y; Cui, Y; Yin, F; Craig, T; Dawson, L; Al-Hallaq, H; Chmura, S

2014-01-01

Purpose: To review IGRT credentialing experience and unexpected technical issues encountered in connection with advanced radiotherapy technologies as implemented in RTOG clinical trials. To update IGRT credentialing procedures with the aim of improving the quality of the process, and to increase the proportion of IGRT credentialing compliance. To develop a living disease site-specific IGRT encyclopedia. Methods: Numerous technical issues were encountered during the IGRT credentialing process. The criteria used for credentialing review were based on: image quality; anatomy included in fused data sets and shift results. Credentialing requirements have been updated according to the AAPM task group reports for IGRT to ensure that all required technical items are included in the quality review process. Implementation instructions have been updated and expanded for recent protocols. Results: Technical issues observed during the credentialing review process include, but are not limited to: poor quality images; inadequate image acquisition region; poor data quality; shifts larger than acceptable; no soft tissue surrogate. The updated IGRT credentialing process will address these issues and will also include the technical items required from AAPM: TG 104; TG 142 and TG 179 reports. An instruction manual has been developed describing a remote credentialing method for reviewers. Submission requirements are updated, including images/documents as well as facility questionnaire. The review report now includes summary of the review process and the parameters that reviewers check. We have reached consensus on the minimum IGRT technical requirement for a number of disease sites. RTOG 1311(NRG-BR002A Phase 1 Study of Stereotactic Body Radiotherapy (SBRT) for the Treatment of Multiple Metastases) is an example, here; the protocol specified the minimum requirement for each anatomical sites (with/without fiducials). Conclusion: Technical issues are identified and reported. IGRT

SU-E-CAMPUS-J-04: Image Guided Radiation Therapy (IGRT): Review of Technical Standards and Credentialing in Radiotherapy Clinical Trials

Energy Technology Data Exchange (ETDEWEB)

Giaddui, T; Chen, W; Yu, J; Gong, Y; Galvin, J; Xiao, Y [Thomas Jefferson University, Philadelphia, PA (United States); Cui, Y; Yin, F [Duke University Medical Center, Durham, NC (United States); Craig, T; Dawson, L [The Princess Margaret Cancer Centre - UHN, Toronto, ON (Canada); Al-Hallaq, H; Chmura, S [The University of Chicago, Chicago, IL. (United States)

2014-06-15

Purpose: To review IGRT credentialing experience and unexpected technical issues encountered in connection with advanced radiotherapy technologies as implemented in RTOG clinical trials. To update IGRT credentialing procedures with the aim of improving the quality of the process, and to increase the proportion of IGRT credentialing compliance. To develop a living disease site-specific IGRT encyclopedia. Methods: Numerous technical issues were encountered during the IGRT credentialing process. The criteria used for credentialing review were based on: image quality; anatomy included in fused data sets and shift results. Credentialing requirements have been updated according to the AAPM task group reports for IGRT to ensure that all required technical items are included in the quality review process. Implementation instructions have been updated and expanded for recent protocols. Results: Technical issues observed during the credentialing review process include, but are not limited to: poor quality images; inadequate image acquisition region; poor data quality; shifts larger than acceptable; no soft tissue surrogate. The updated IGRT credentialing process will address these issues and will also include the technical items required from AAPM: TG 104; TG 142 and TG 179 reports. An instruction manual has been developed describing a remote credentialing method for reviewers. Submission requirements are updated, including images/documents as well as facility questionnaire. The review report now includes summary of the review process and the parameters that reviewers check. We have reached consensus on the minimum IGRT technical requirement for a number of disease sites. RTOG 1311(NRG-BR002A Phase 1 Study of Stereotactic Body Radiotherapy (SBRT) for the Treatment of Multiple Metastases) is an example, here; the protocol specified the minimum requirement for each anatomical sites (with/without fiducials). Conclusion: Technical issues are identified and reported. IGRT

Complexity and Control: The Organisational Background of Credentialism.

Science.gov (United States)

Tyler, William

1982-01-01

Examines the role of organizational processes in generating the demand for qualified personnel. Neo-Weberian theorists point to the importance of contextual features of organizations such as size and national prominence as predictors of educational demand. Neo-Marxist historians examine the role played by credentials. (AM)

Who believes us when we try to conceal our prejudices? The effectiveness of moral credentials with in-groups versus out-groups.

Science.gov (United States)

Krumm, Angela J; Corning, Alexandra F

2008-12-01

Moral credentials are pieces of evidence accrued by individuals that can later be presented, intentionally or unintentionally, as a record of their lack of prejudice (B. Monin & D. T. Miller, 2001). For example, attending a gay pride march or being an openly gay person ostensibly credentials an individual to tell gay jokes free of concern that he or she will be labeled prejudiced. The authors tested whether displays of moral credentials actually work to insulate individuals from attributions of prejudice by others. Results indicated that displays of moral credentials generally discourage attributions of discrimination but unevenly so, depending on who makes the judgment. Consistent with predictions from social identity theory (H. Tajfel & J. C. Turner, 1979), participants most swayed by displays of moral credentials were those who shared an in-group status with the person displaying the moral credentials.

Purpose-restricted Anonymous Mobile Communications Using Anonymous Signatures in Online Credential Systems

DEFF Research Database (Denmark)

Fathi, Hanane; Shin, SeongHan; Kobara, Kazukuni

2010-01-01

To avoid the risk of long-term storage of secrets on a portable device, an online credential system supports the roaming user in retrieving securely at various locations his private key and other material to generate anonymous signatures. The protocol proposed here allows a roaming mobile user...... to access anonymously services such as whistle blowing and net-counselling. Our approach: (1) allows a mobile user, remembering a short password, to anonymously and securely retrieve the credentials necessary for his anonymous communication without assuming a pre-established anonymous channel...

Audited credential delegation: a usable security solution for the virtual physiological human toolkit

Science.gov (United States)

Haidar, Ali N.; Zasada, Stefan J.; Coveney, Peter V.; Abdallah, Ali E.; Beckles, Bruce; Jones, Mike A. S.

2011-01-01

We present applications of audited credential delegation (ACD), a usable security solution for authentication, authorization and auditing in distributed virtual physiological human (VPH) project environments that removes the use of digital certificates from end-users' experience. Current security solutions are based on public key infrastructure (PKI). While PKI offers strong security for VPH projects, it suffers from serious usability shortcomings in terms of end-user acquisition and management of credentials which deter scientists from exploiting distributed VPH environments. By contrast, ACD supports the use of local credentials. Currently, a local ACD username–password combination can be used to access grid-based resources while Shibboleth support is underway. Moreover, ACD provides seamless and secure access to shared patient data, tools and infrastructure, thus supporting the provision of personalized medicine for patients, scientists and clinicians participating in e-health projects from a local to the widest international scale. PMID:22670214

Audited credential delegation: a usable security solution for the virtual physiological human toolkit.

Science.gov (United States)

Haidar, Ali N; Zasada, Stefan J; Coveney, Peter V; Abdallah, Ali E; Beckles, Bruce; Jones, Mike A S

2011-06-06

We present applications of audited credential delegation (ACD), a usable security solution for authentication, authorization and auditing in distributed virtual physiological human (VPH) project environments that removes the use of digital certificates from end-users' experience. Current security solutions are based on public key infrastructure (PKI). While PKI offers strong security for VPH projects, it suffers from serious usability shortcomings in terms of end-user acquisition and management of credentials which deter scientists from exploiting distributed VPH environments. By contrast, ACD supports the use of local credentials. Currently, a local ACD username-password combination can be used to access grid-based resources while Shibboleth support is underway. Moreover, ACD provides seamless and secure access to shared patient data, tools and infrastructure, thus supporting the provision of personalized medicine for patients, scientists and clinicians participating in e-health projects from a local to the widest international scale.

General Education Development (GED®) Credential Attainment, Externalizing Disorders, and Substance Use Disorders in Disconnected Emerging Adults

Science.gov (United States)

Bergman, Andrea; Kong, Grace; Pope, Alice

2014-01-01

There are many benefits for emerging adults, both financial and personal, in obtaining a General Education Development (GED®) credential (Ou, 2008). However, little is known about the correlates of GED® credential attainment in "disconnected" emerging adults attending GED® programs. Our goal was to examine whether externalizing…

[The process of professional qualification for the critical care nurse].

Science.gov (United States)

Santana, Neuranides; Fernandes, Josicélia Dumêt

2008-01-01

Study of qualitative approach based on the dialectic historical materialism, that aimed at analizing the conformation of professional credentialing process of the critical care nurse of a hospital in Salvador, BA, Brazil. The subjects were 29 nurses. The analysis was based on the Analysis of Content, with the technique of Thematic Analysis, directed by the dialectic method. Three categories correlated to credentialing were generated: technological sophistication; individual and the collective organizational and as product and instrument of the work process. The results demonstrated that the institution estimulates the credentialing process; however the administrative politicies make it difficult the effectuation of the process of credentialing of the nurses.

The MFA in Creative Writing: The Uses of a “Useless” Credential

Directory of Open Access Journals (Sweden)

Clayton Childress

2015-08-01

Full Text Available Over half of today’s Masters of Fine Arts programs in creative writing in the United States were founded after the year 2000. Has the MFA-CW become a necessary credential for novelists? Relying on participant observation field research in the American literary field and interviews with authors, publishers, MFA graduates, and instructors, this work focuses on a paradox: Despite widespread agreement that the credential doesn’t “teach” enrollees to be a good writers or open up a pathway to a professional writing career, many involved in the literary field hold an MFA-CW. In this paper, we look at the uses of the MFA-CW, finding that although the degree serves little if any jurisdictional or closure-related functions it is made useful in a variety of ways: for students as a symbolic resource for artistic identity, for working writers as a source of income and community, and for editors in publishing houses as a signal for possible marketing and publicity potential.Keywords: Credentialism, Professions, Literature, Books, Publishing, MFA  

Pedagogical Techniques of Improvisation Instructors without Academic Credentials

Science.gov (United States)

Salonen, Richard Wayne

2010-01-01

The importance of music improvisation can be seen in its inclusion in the National Standards for Music Education and the accreditation standards for the National Association of Schools of Music. The purpose of this study was to examine the pedagogical techniques and materials of improvisation instructors who do not hold academic credentials. The…

CRC Credential Attainment by State Vocational Rehabilitation Counselors

Science.gov (United States)

Harpster, Anna M.; Byers, Katherine L.; Harris, LaKeisha L.

2011-01-01

This study examines 137 state vocational rehabilitation (VR) counselors' perceptions of the value of having the Certified Rehabilitation Counselor (CRC) credential. While almost 53% of this sample included persons who were certified, the majority who were not indicated that the two major reasons for not currently having this designation were: (a)…

Maintaining Professional Commitment as a Newly Credentialed Athletic Trainer in the Secondary School Setting.

Science.gov (United States)

Mazerolle, Stephanie M; Myers, Sarah L; Walker, Stacy E; Kirby, Jessica

2018-03-01

  Professional commitment, or one's affinity and loyalty to a career, has become a topic of interest in athletic training. The expanding research on the topic, however, has omitted newly credentialed athletic trainers (ATs). For an impressionable group of practitioners, transitioning to clinical practice can be stressful.   To explore the professional commitment of newly credentialed ATs in the secondary school setting.   Secondary school.   Qualitative study.   A total of 31 newly credentialed ATs (6 men, 25 women; mean age = 24 ± 3 years) participated. Of these, 17 ATs (4 men, 13 women; mean age = 25 ± 4 years) were employed full time in the secondary school setting, and 14 ATs (2 men, 12 women; mean age = 23.0 ± 2.0 years) were graduate assistant students in the secondary school setting.   All participants completed semistructured interviews, which focused on their experiences in the secondary school setting and transitioning into the role and setting. Transcripts were analyzed using the phenomenologic approach. Creditability was established by peer review, member checks, and researcher triangulation.   Four main findings related to the professional commitment of newly credentialed ATs in the secondary school setting were identified. Work-life balance, professional relationships formed with the student-athletes, enjoyment gained from working in the secondary school setting, and professional responsibility emerged as factors facilitating commitment.   Affective commitment is a primary facilitator of professional commitment. Newly credentialed ATs who enjoy their jobs and have time to engage in nonwork roles are able to maintain a positive professional commitment. Our findings align with the previous literature and help strengthen our understanding that rejuvenation and passion are important to professional commitment.

Educational Credentials in Australia: Average Positional Value in Decline. Centre for the Study of Higher Education Research Working Papers, 93.4.

Science.gov (United States)

Marginson, Simon

Since the 1960s there has been a major expansion in the number of people in Australia holding post school educational credentials and the proportion of the full time work force with those credentials. The penalties of not holding credentials, in terms of the incidence and duration of unemployment, are increasingly severe. At the same time, there…

Qualification of stainless steel for OTEC heat exchanger tubes

Energy Technology Data Exchange (ETDEWEB)

LaQue, F.L.

1979-01-01

The history of the AL-6X alloy is reviewed and its credentials as a candidate for use as tubing in Ocean Thermal Energy Conversion Heat Exchangers are examined. Qualification is based on results of accelerated tests using ferric chloride for resistance to crevice corrosion and pitting, long-time crevice corrosion and pitting tests in natural sea water and anticipated resistance to attack by ammonia and mixtures of ammonia and sea water. Since the alloy has no natural resistance to fouling by marine organisms, it must be able to accomodate action to prevent fouling by chlorination or to remove it by mechanical cleaning techniques or appropriate chemical cleaning methods. The satisfactory behavior indicated by the various accelerated and long-time corrosion tests has been confirmed by excellent performance of several million feet of tubing in condensers in coastal power plants. Early evaluation tests demonstrated the need for proper heat treatment to avoid the presence of a sigma phase, which promoted severe pitting of some, but not all, specimens in tests in natural sea water. The available data qualify the AL-6X alloy as being a satisfactory alternate to titanium for tubes in OTEC heat exchangers.

QUALIFICATIONS FRAMEWORK DEVELOPMENT AND QUALIFICATIONS RATING IN THE LAND MANAGEMENT SPHERE

Directory of Open Access Journals (Sweden)

A. A. Myrasheva

2014-01-01

Full Text Available The aim of the research is to observe the existing approaches to qualifications framework development in the sphere of land management, cadastres and real estate management, as well as the qualifications framework adaptation to European system. The relevance of the issue is related to the specific professional and institutional problems facing Russian educational establishments engaged in personnel training in the given sphere. The authors demonstrate the qualifications framework development in the land management sector regarding it as a key mechanism of educational mobility and the router for knowledge acquisition and updates. The qualifications framework is referred to as a systematic and structured description of recognized qualifications. The accepted worldwide methodology of organizing the educational process and quality control system is given. The emphasis is on the need to comply the qualifications framework with the Russian State Educational Standards.

Inspector qualification guidelines

International Nuclear Information System (INIS)

Batty, A.C.; Van Binnebeek, J.J.; Ericsson, P.O.; Fisher, J.C.; Geiger, P.; Grandame, M.; Grimes, B.K.; Joode, A. de; Kaufer, B.; Kinoshita, M.; Klonk, H.; Koizumi, H.; Maeda, N.; Maqua, M.; Perez del Moral, C.; Roselli, F.; Warren, T.; Zimmerman, R.

1994-07-01

The OECD Nuclear Energy Agency Committee on Nuclear Regulatory Activities (CNRA) has a Working Group on Inspection Practices (WGIP). The WGIP provides a forum for the exchange of Information and experience on the safety Inspection practices of regulatory authorities In the CNRA member countries. A consistent qualification process and well defined level of training for all Inspectors who participate In the safety Inspections are needed to provide consistent Inspections and reliable Inspection results. The WGIP organized in 1992 a workshop on the conduct of inspections, inspector qualification and training, and shutdown inspections at the Technical Training Center of the US NRC in Chattanooga, Tennessee. In the connection of workshop the WGIP identified a need to develop guidance for inspector qualification which could be used as a model by those who are developing their qualification practices. The inspector qualification journals of US NRC provided a good basis for the work. The following inspector qualification guideline has been developed for guidance of qualification of a new inspector recruited to the regulatory body. This guideline has been developed for helping the supervisors and training officers to give the initial training and familiarization to the duties of a new inspector in a controlled manner. US NRC inspector qualification journals have been used to define the areas of attention. This guideline provides large flexibility for application in different type organizations. Large organizations can develop separate qualification journals for each inspector positions. Small regulatory bodies can develop individual training programmes by defining the necessary training topics on case by case basis. E.g. the guideline can be used to define the qualifications of contracted inspectors used in some countries. The appropriate part would apply. Annex 1 gives two examples how this guideline could be applied

Inspector qualification guidelines

Energy Technology Data Exchange (ETDEWEB)

Batty, A. C.; Van Binnebeek, J. J.; Ericsson, P. O.; Fisher, J. C.; Geiger, P.; Grandame, M.; Grimes, B. K.; Joode, A. de; Kaufer, B.; Kinoshita, M.; Klonk, H.; Koizumi, H.; Maeda, N.; Maqua, M.; Perez del Moral, C.; Roselli, F.; Warren, T.; Zimmerman, R.

1994-07-15

The OECD Nuclear Energy Agency Committee on Nuclear Regulatory Activities (CNRA) has a Working Group on Inspection Practices (WGIP). The WGIP provides a forum for the exchange of Information and experience on the safety Inspection practices of regulatory authorities In the CNRA member countries. A consistent qualification process and well defined level of training for all Inspectors who participate In the safety Inspections are needed to provide consistent Inspections and reliable Inspection results. The WGIP organized in 1992 a workshop on the conduct of inspections, inspector qualification and training, and shutdown inspections at the Technical Training Center of the US NRC in Chattanooga, Tennessee. In the connection of workshop the WGIP identified a need to develop guidance for inspector qualification which could be used as a model by those who are developing their qualification practices. The inspector qualification journals of US NRC provided a good basis for the work. The following inspector qualification guideline has been developed for guidance of qualification of a new inspector recruited to the regulatory body. This guideline has been developed for helping the supervisors and training officers to give the initial training and familiarization to the duties of a new inspector in a controlled manner. US NRC inspector qualification journals have been used to define the areas of attention. This guideline provides large flexibility for application in different type organizations. Large organizations can develop separate qualification journals for each inspector positions. Small regulatory bodies can develop individual training programmes by defining the necessary training topics on case by case basis. E.g. the guideline can be used to define the qualifications of contracted inspectors used in some countries. The appropriate part would apply. Annex 1 gives two examples how this guideline could be applied.

Portfolio Evaluation for Professional Competence: Credentialing in Genetics for Nurses.

Science.gov (United States)

Cook, Sarah Sheets; Kase, Ron; Middelton, Lindsay; Monsen, Rita Black

2003-01-01

Describes the process used by the Credentialing Committee of the International Society of Nurses in Genetics to validate evaluation criteria for nursing portfolios using neural network programs. Illustrates how standards are translated into measurable competencies and provides a scoring guide. (SK)

The Study and Comparison of Irrational Beliefs in Addicted and Normal People

Directory of Open Access Journals (Sweden)

Hasan Aminpoor

2011-05-01

Full Text Available Introduction: Irrational beliefs have some destructive and serious effects on individuals’ behavior at home, work environment, and in social environment also implicate emotional deep effects (depression, grief, self teasing, self reproaching, and contrition. The main aim of present study was the comparison of irrational beliefs in addicted and normal people. Method: the research method was causal comparative research and taking into account the subject importance and its role in individuals tendency toward addiction a sample of 120 persons (60 addicted people and 60 normal ones was selected based on available samplingand similar in order of age and the Joens irrational beliefs questionnaire was administered among selected sample. In order to analyze data, independent samples t test, and ANOVA were run. Results: There was significant difference between the mean score of irrational beliefs with consideration of group (addicted and normal group, also, in addicted people there was significant difference between the mean score of irrational beliefs with consideration of education level, and economical status. Conclusion: The mean score of irrational beliefs in addicted people is more than normal ones. Taking into consideration that individuals can change their behaviors and feelings through changing their beliefs, so one must replace irrational beliefs with rational ones based on educational qualifications.

Virtual EPID standard phantom audit (VESPA) for remote IMRT and VMAT credentialing

Science.gov (United States)

Miri, Narges; Lehmann, Joerg; Legge, Kimberley; Vial, Philip; Greer, Peter B.

2017-06-01

A virtual EPID standard phantom audit (VESPA) has been implemented for remote auditing in support of facility credentialing for clinical trials using IMRT and VMAT. VESPA is based on published methods and a clinically established IMRT QA procedure, here extended to multi-vendor equipment. Facilities are provided with comprehensive instructions and CT datasets to create treatment plans. They deliver the treatment directly to their EPID without any phantom or couch in the beam. In addition, they deliver a set of simple calibration fields per instructions. Collected EPID images are uploaded electronically. In the analysis, the dose is projected back into a virtual cylindrical phantom. 3D gamma analysis is performed. 2D dose planes and linear dose profiles are provided and can be considered when needed for clarification. In addition, using a virtual flat-phantom, 2D field-by-field or arc-by-arc gamma analyses are performed. Pilot facilities covering a range of planning and delivery systems have performed data acquisition and upload successfully. Advantages of VESPA are (1) fast turnaround mainly driven by the facility’s capability of providing the requested EPID images, (2) the possibility for facilities performing the audit in parallel, as there is no need to wait for a phantom, (3) simple and efficient credentialing for international facilities, (4) a large set of data points, and (5) a reduced impact on resources and environment as there is no need to transport heavy phantoms or audit staff. Limitations of the current implementation of VESPA for trials credentialing are that it does not provide absolute dosimetry, therefore a Level I audit is still required, and that it relies on correctly delivered open calibration fields, which are used for system calibration. The implemented EPID based IMRT and VMAT audit system promises to dramatically improve credentialing efficiency for clinical trials and wider applications.

Electrical equipment qualification

International Nuclear Information System (INIS)

Farmer, W.S.

1983-01-01

Electrical equipment qualification research programs being carried out by CEA, JAERI, and Sandia Laboratories are discussed. Objectives of the program are: (1) assessment of accident simulation methods for electrical equipment qualification testing; lower coarse (2) evaluation of equipment aging and accelerated aging methods; (3) determine radiation dose spectrum to electrical equipment and assess simulation methods for qualification; (4) identify inadequacies in electrical equipment qualification procedures and standards and potential failure modes; and (5) provide data for verifying and improving standards, rules and regulatory guides

Seismic qualification of equipment

International Nuclear Information System (INIS)

Heidebrecht, A.C.; Tso, W.K.

1983-03-01

This report describes the results of an investigation into the seismic qualification of equipment located in CANDU nuclear power plants. It is particularly concerned with the evaluation of current seismic qualification requirements, the development of a suitable methodology for the seismic qualification of safety systems, and the evaluation of seismic qualification analysis and testing procedures

Hybrid Qualifications

DEFF Research Database (Denmark)

Against the background of increasing qualification needs there is a growing awareness of the challenge to widen participation in processes of skill formation and competence development. At the same time, the issue of permeability between vocational education and training (VET) and general education...... has turned out as a major focus of European education and training policies and certainly is a crucial principle underlying the European Qualifications Framework (EQF). In this context, «hybrid qualifications» (HQ) may be seen as an interesting approach to tackle these challenges as they serve «two...

21 CFR 1311.105 - Requirements for obtaining an authentication credential-Individual practitioners.

Science.gov (United States)

2010-04-01

... Office of Technology Strategy/Division of Identity Management to conduct identity proofing that meets the... assurance level or above. (b) The practitioner must submit identity proofing information to the credential...

Spanish nurses' credentialing in the 20th century.

Science.gov (United States)

Hernández Conesa, J M; Cayuela Fuentes, P S; Beneit Montesinos, J V; González Jurado, M

2012-06-01

Nurses credentialing as healthcare professionals commenced in Western Europe and in the USA by the end of the 19th and the beginning of the 20th century, boosted by the protestant reform movement. In Spain, it started in 1915, during the kingdom of Alfonso XIII (1902-1931). This historical period was marked by great political instability and big flaws in the healthcare delivery system. To describe the regulatory pathway that gave rise to the nursing profession in Spain, through official credentialing and regulation during the first third of the 20th century. Documental, historical and regulatory documental research describing and analysing the national legislative sources used to regulate the professional development, as well as the education, training and competencies of the nursing practice in Spain, as compared with the developments in the European and American context. Professional development of the nursing profession in Western Europe and in the USA is consolidated during the 20th century as resulting in educational and training enhancement and the establishment of national and international professional bodies. In Spain, the regulatory and legal recognition of the nursing profession come into being in 1915 in response to a request from a female religious congregation. © 2012 The Authors. International Nursing Review © 2012 International Council of Nurses.

The Decline in the Standing of Educational Credentials in Australia.

Science.gov (United States)

Marginson, Simon

1995-01-01

An analysis of the economic returns of education in Australia finds a rising need for education at a time of diminishing apparent returns. It is proposed that the notions of credentialism and education as a positional good provide a better explanation for this phenomenon than does the human capital approach. (MSE)

Australian Qualifications Framework Lower-Level Qualifications: Pathways to Where for Young People?

Science.gov (United States)

Stanwick, John

2005-01-01

This study investigates where certificate I and II qualifications lead young people aged 15-24 years in terms of employment and further study. A prime motivation for young people undertaking these qualifications is to facilitate transition into the labour market. These qualifications are aimed at developing basic vocational skills or preparatory…

Preschool Teachers' Attitudes and Beliefs Toward Science

Science.gov (United States)

Lloyd, Sharon Henry

In the United States, a current initiative, Advancing Active STEM Education for Our Youngest Learners, aims to advance science, technology, engineering, and math (STEM) education in early childhood. The purpose of this study was to understand preschool teachers' proficiency with science and address the problem of whether or not science learning opportunities are provided to young children based on teachers' attitudes and beliefs. A theoretical framework for establishing teachers' attitudes toward science developed by van Aalderen-Smeets, van der Molen, and Asma, along with Bandura's theory of self-efficacy were the foundations for this research. Research questions explored preschool teachers' attitudes and beliefs toward science in general and how they differed based on education level and years of preschool teaching experience. Descriptive comparative data were collected from 48 preschool teacher participants using an online format with a self-reported measure and were analyzed using nonparametric tests to describe differences between groups based on identified factors of teacher comfort, child benefit, and challenges. Results indicated that the participants believed that early childhood science is developmentally appropriate and that young children benefit from science instruction through improved school-readiness skills. Preschool teachers with a state credential or an associate's degree and more teaching experience had more teacher comfort toward science based on attitudes and beliefs surveyed. The data indicated participating preschool teachers experienced few challenges in teaching science. The study may support positive social change through increased awareness of strengths and weaknesses of preschool teachers for the development of effective science professional development. Science is a crucial component of school-readiness skills, laying a foundation for success in later grades.

Job Satisfaction in Health Education and the Value of Added Credentialing.

Science.gov (United States)

Prelip, Michael L.

2001-01-01

Surveyed 267 health educators to measure job satisfaction in the profession and investigate whether individual credentialing affected overall job satisfaction and satisfaction with work, pay, opportunity for promotion, coworkers, and supervision. Results indicated satisfaction with coworkers, work, supervision, and pay, but dissatisfaction with…

The SACE Review Panel's Final Report: Significant Flaws in the Analysis of Statistical Data

Science.gov (United States)

Gregory, Kelvin

2006-01-01

The South Australian Certificate of Education (SACE) is a credential and formal qualification within the Australian Qualifications Framework. A recent review of the SACE outlined a number of recommendations for significant changes to this certificate. These recommendations were the result of a process that began with the review panel…

Training, Degrees, and Credentials in the Hiring of School Psychologists

Science.gov (United States)

O'donnell, Patrick S.; Dunlap, Linda L.

2014-01-01

A national sample of 246 Directors of Pupil Personnel Services and Directors of Special Education were surveyed to assess the importance they place on training, degrees, and credentials in the hiring of school psychologists. High, but varying, levels of importance were found for the content knowledge and skill areas in the National Association of…

Perceptions of Interior Design Program Chairs Regarding Credentials for Faculty

Science.gov (United States)

Miller, Beth R.

2017-01-01

The purpose of this study was to determine whether program chairs in interior design have a preferred degree credential for candidates seeking a full-time, tenure-track position or other full-time position at their institution and to determine if there is a correlation between this preference and the program chair's university's demographics,…

The Perceived Influence of Industry-Sponsored Credentials on the Recruitment Process in the Information Technology Industry: Employer and Employee Perspectives

Science.gov (United States)

Bartlett, Kenneth R.; Horwitz, Sujin K.; Ipe, Minu; Liu, Yuwen

2005-01-01

The increase in the number of industry-sponsored credential programs raises many questions for career and technical education. This study investigated the perceived influence of industry-sponsored credentials on the recruitment process in the information technology (IT) field. Influence is examined from the perspective of Human Resource (HR)…

Post-GED-Credential College Prospects for Adults with Special Needs

Science.gov (United States)

Patterson, Margaret Becker

2014-01-01

Many adults with special needs, who did not finish high school, complete a GED® credential to go to college. As they prepare to transition, they may encounter barriers and likely require supports to succeed in college. The purpose of this qualitative research paper is to describe the college prospects of transitioning adults with a GED credential…

Reaction Qualifications Revisited

DEFF Research Database (Denmark)

Lippert-Rasmussen, Kasper

2009-01-01

  When, in a competitive sphere, people are selected on the basis of qualifications only, their chances of acquiring positions of advantage may seem to depend entirely upon their abilities, not discriminatory bias. However, if reaction qualifications - i.e. characteristics which contribute...... to a person's effectiveness by causing a favourable reaction in customers, co-workers etc. (for short: recipients) - are involved, this assumption is false. Building on work by Wertheimer, Mason, and Miller, this paper proposes an account of the reaction qualifications that count, from the point of view...... of merit. Specifically, it preserves symmetry between negative evaluations of antimeritocratic bases of selection and negative evaluations of qualifications rooted in comparable antimeritocratic reactions. So if employers should not select among applicants on the basis of their (the employers') racial...

A Critique of the SACE Review Panel's Report on Community Views

Science.gov (United States)

Gregory, Kelvin

2006-01-01

The South Australian Certificate of Education (SACE), introduced in 1992-93, is a credential and formal qualification within the Australian Qualifications Framework (AQF). SACE was recently subjected to a review that led to a series of significant recommendations. These recommendations came out of a process that began with the Review Panel…

Trans-Local Academic Credentials and the (Re)production of Financial Elites

Science.gov (United States)

Hall, Sarah; Appleyard, Lindsey

2011-01-01

This paper examines the ways in which credentials from a range of education providers are used to (re)produce transnational financial elites in London's international financial district. Extant research has examined the long-standing relationship between educational background and entry into these financial labour markets. Far less attention has…

Environmental/dynamic mechanical equipment qualification and dynamic electrical equipment qualification program (EDQP)

International Nuclear Information System (INIS)

Hunter, J.A.

1984-01-01

Equipment qualification research is being conducted to investigate acceptable criteria, requirements, and methodologies for the dynamic (including seismic) and environmental qualification of mechanical equipment and for the dynamic (including seismic) qualification of electrical equipment. The program is organized into three elements: (1) General Research, (2) Environmental Research, and (3) Dynamic Research. This paper presents the highlights of the results to date in these three elements of the program

Back to Beginnings: Credentialism, Productivity, and Adam Smith's Division of Labour.

Science.gov (United States)

Davis, Denis J.

1981-01-01

The foundation of factional pressures for upgrading educational credentials in the labor market is examined through a review of human capital and screening theories. The writings of Adam Smith are referenced to show that the claims of the beneficial effects of educational upgrading have been questioned for 200 years. (Author/MLW)

"A Degree Is a Part of the Puzzle, but Only a Piece." Understanding How Employers Determine the Value of Academic Credentials

Science.gov (United States)

Kaspari, Brenda Anderson

2017-01-01

With the skyrocketing costs of higher education and the increased scrutiny of how educational institutions prepare graduates for the workplace, this dissertation explored how the "outsiders," or employers, view and determine the value of academic credentials. Using the premise of credentialism, this grounded theory, qualitative study…

REGULATION OF NATIONAL QUALIFICATIONS SYSTEMS

Directory of Open Access Journals (Sweden)

Anna A. Muravyeva

2014-01-01

Full Text Available The paper looks into the diverse aspects of qualifications system regulation, designed for balancing the supply and demand in the labor and educational service markets. Both the objects and mechanisms of such regulation are described. Special attention is given to institutions, involved in regulation of qualifications, and their jurisdiction. Another emphasis is on the industry-related regulation of qualifications which proved to be effective both on the national and European level. Such structures were first established on the national levels to regulate the qualifications and ensure their comparability and compatibility, given the economic globalization and growing labor and academic mobility. The author points out the role of the ministries of education and labor in maintaining a steady qualifications system, and outlines the positive experience of Great Britain using the industry councils for continuing development of qualifications system.

Does Higher Education Expansion Reduce Credentialism and Gender Discrimination in Education?

Science.gov (United States)

Lin, Ching-Yuan; Lin, Chun-Hung A.

2012-01-01

This paper investigates the effects of higher education expansion on the phenomena of credentialism and gender discrimination in education. Using the survey data of Family Income and Expenditure by DGBAS, Taiwan from 1980 to 2009, we examine the time path of the effect of higher education expansion on household expenditures for children's…

The Social Sources of Educational Credentialism: Status Cultures, Labor Markets, and Organizations.

Science.gov (United States)

Brown, David K.

2001-01-01

Discusses expansion of access to higher education. Reviews contested development and promise of the Weberian theory of educational credentialism. Examines the relationship of educational expansion to economic growth, relative importance of technical skills versus occupational status-group cultures in degrees and recruitment, significance of degree…

Digital Badges for Staff Training: Motivate Employees to Learn with Micro-Credentials

Science.gov (United States)

Copenhaver, Kimberly; Pritchard, Liz

2017-01-01

Integrating micro-credentialing into employee training programs offers libraries an innovative and individualized way to recognize and certify learning and achievement. Digital badges provide a low-cost initiative to support learning benefiting both the individual and institution, offering evidence of skill development that transcends the library…

What Is a Bilingual School Psychologist? A National Survey of the Credentialing Bodies of School Psychologists: Implications for the Assessment of Bilinguals

Science.gov (United States)

Sotelo-Dynega, Marlene

2015-01-01

The present study explored the credentialing practices for bilingual school psychologists in the United States. Credentialing agencies of school psychologists, mostly State Departments of Education, across the 50 states and the District of Columbia were contacted via telephone by trained graduate student research assistants. Only two of the…

TH-B-12A-01: TG124 “A Guide for Establishing a Credentialing and Privileging Program for Users of Fluoroscopic Equipment in Healthcare Organizations”

Energy Technology Data Exchange (ETDEWEB)

Moore, M [Philadelphia VA Medical Ctr., Philadelphia, PA (United States)

2014-06-15

Fluoroscopy credentialing and privileging programs are being instituted because of recorded patient injuries and the widespread growth in fluoroscopy use by operators whose medical education did not include formal fluoroscopy training. This lack of training is recognized as a patient safety deficiency, and medical physicists and health physicists are finding themselves responsible for helping to establish fluoroscopy credentialing programs. While physicians are very knowledgeable about clinical credentials review and the privileging process, medical physicists and health physicists are not as familiar with the process and associated requirements. To assist the qualified medical physicist (QMP) and the radiation safety officer (RSO) with these new responsibilities, TG 124 provides an overview of the credentialing process, guidance for policy development and incorporating trained fluoroscopy users into a facility's established process, as well as recommendations for developing and maintaining a risk-based fluoroscopy safety training program. This lecture will review the major topics addressed in TG124 and relate them to practical situations. Learning Objectives: Understand the difference between credentialing and privileging. Understand the responsibilities, interaction and coordination among key individuals and committees. Understand options for integrating the QMP and/or RSO and Radiation Safety Committee into the credentialing and privileging process. Understand issues related to implementing the fluoroscopy safety training recommendations and with verifying and documenting successful completion.

TH-B-12A-01: TG124 “A Guide for Establishing a Credentialing and Privileging Program for Users of Fluoroscopic Equipment in Healthcare Organizations”

International Nuclear Information System (INIS)

Moore, M

2014-01-01

Fluoroscopy credentialing and privileging programs are being instituted because of recorded patient injuries and the widespread growth in fluoroscopy use by operators whose medical education did not include formal fluoroscopy training. This lack of training is recognized as a patient safety deficiency, and medical physicists and health physicists are finding themselves responsible for helping to establish fluoroscopy credentialing programs. While physicians are very knowledgeable about clinical credentials review and the privileging process, medical physicists and health physicists are not as familiar with the process and associated requirements. To assist the qualified medical physicist (QMP) and the radiation safety officer (RSO) with these new responsibilities, TG 124 provides an overview of the credentialing process, guidance for policy development and incorporating trained fluoroscopy users into a facility's established process, as well as recommendations for developing and maintaining a risk-based fluoroscopy safety training program. This lecture will review the major topics addressed in TG124 and relate them to practical situations. Learning Objectives: Understand the difference between credentialing and privileging. Understand the responsibilities, interaction and coordination among key individuals and committees. Understand options for integrating the QMP and/or RSO and Radiation Safety Committee into the credentialing and privileging process. Understand issues related to implementing the fluoroscopy safety training recommendations and with verifying and documenting successful completion

Learn More about EPA’s Plans to Establish Voluntary Criteria for Radon Credentialing Organizations

Science.gov (United States)

This page will provide the public with information on a Federal Register Notice of Intent to Establish Voluntary Criteria for Radon Credentialing Organizations.Topics covered include background and information on how to review and provide comments.

Security credentials management system (SCMS) design and analysis for the connected vehicle system : draft.

Science.gov (United States)

2013-12-27

This report presents an analysis by Booz Allen Hamilton (Booz Allen) of the technical design for the Security Credentials Management System (SCMS) intended to support communications security for the connected vehicle system. The SCMS technical design...

Educational Transitions in Israel: A Test of the Industrialization and Credentialism Hypotheses.

Science.gov (United States)

Shavit, Yossi; Kraus, Vered

1990-01-01

Explores the industrialization and credentialism hypotheses and predictions of educational attainment levels. Finds the effects of the father's education and occupation were stable for those attending school in the 1940s, 1950s, and 1960s. Notes that the effects of ethnicity declined in the transition from primary to secondary school. (NL)

5 CFR 302.403 - Qualifications for promotion.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Qualifications for promotion. 302.403... EMPLOYMENT IN THE EXCEPTED SERVICE Selection and Appointment; Reappointment; and Qualifications for Promotion § 302.403 Qualifications for promotion. In determining qualifications for promotion with respect to an...

The french safety approach regarding equipment qualification

International Nuclear Information System (INIS)

Jalouneix, J.; Deletre, G.; Henry, J.Y.; Rousseau, L.

1989-10-01

The qualification of the equipment, used in France on nuclear reactors and reactor components, is discussed. The approach on safety involves the qualification of mechanical and electrical components, under operating and under seismic conditions. The principles of the qualification program and the list of the equipment concerned, are given. The conditions in which qualification tests are performed and the methods applied, are summarized. The actions for preserving the qualification procedures, are considered

Environmental qualification program for new designs

International Nuclear Information System (INIS)

Doerffer, K.

2007-01-01

Qualification of nuclear power plant equipment and components important to safety (ITS) is an integral part of the design process. The qualification methodology differs based on the severity of service conditions (operational and ambient), to which the ITS equipment is exposed. In Canada, the licensing requirements for environmental qualification for new designs are governed by the Canadian Standard Association (CSA) standard, N290.13-2005 titled 'Environmental Qualification of Equipment for CANDU Nuclear Power Plants' and the pre-consultation draft, 'Requirements for Design of Nuclear Power Plants'(DRD), issued for trial use by the Canadian Nuclear Safety Commission (CNSC) in March 2005. This paper will describe AECL's current Environmental Qualification program developed to comply with the above licensing requirements as applied to new designs. The focus will be given to qualification of ITS systems structures and components (SSC) to harsh conditions occurring due to the Design Basis Accidents (DBA). (author)

Generating solutions : summary of the Electricity Sector Council's review of foreign credential recognition

International Nuclear Information System (INIS)

2008-03-01

The Electricity Sector Council has recognized the increasing requirement to recruit and retain internationally trained workers to offset the anticipated retirement of up to 40 per cent of skilled workers in this sector by 2014. This document provided a brief summary of the review of foreign credential recognition in Canada's Electricity Council which was prepared in February 2008. The purpose of the study was to capture a perceptive picture of Canada's electricity labour force and to assist the Electricity Sector Council in the potential development and implementation of strategies to facilitate the integration of internationally trained workers into Canada's electricity sector. This synopsis report presented the analysis of the study including a discussion of immigration trends; foreign credential recognition in Canada's electricity sector; immigration profiles by region; case study profiles; and recommendations. It was recommended that resources be researched, developed and provided in order to help stakeholders attract, recruit, retain and integrate internationally trained workers. 2 refs

5 CFR 319.302 - Individual qualifications.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Individual qualifications. 319.302... Individual qualifications. Agency heads are delegated authority to approve the qualifications of individuals appointed to SL and ST positions. The agency head must determine that the individual meets the...

Credentialing of radiotherapy centres for a clinical trial of adaptive radiotherapy for bladder cancer (TROG 10.01)

International Nuclear Information System (INIS)

Kron, Tomas; Pham, Daniel; Roxby, Paul; Rolfo, Aldo; Foroudi, Farshad

2012-01-01

Background: Daily variations in bladder filling make conformal treatment of bladder cancer challenging. On-line adaptive radiotherapy with a choice of plans has been demonstrated to reduce small bowel irradiation in single institution trials. In order to support a multicentre feasibility clinical trial on adaptive radiotherapy for bladder cancer (TROG 10.01) a credentialing programme was developed for centres wishing to participate. Methods: The credentialing programme entails three components: a facility questionnaire; a planning exercise which tests the ability of centres to create three adaptive plans based on a planning and five cone beam CTs; and a site visit during which image quality, imaging dose and image guidance procedures are assessed. Image quality and decision making were tested using customised inserts for a Perspex phantom (Modus QUASAR) that mimic different bladder sizes. Dose was assessed in the same phantom using thermoluminescence dosimetry (TLD). Results: All 12 centres participating in the full credentialing programme were able to generate appropriate target volumes in the planning exercise and identify the correct target volume and position the bladder phantom in the phantom within 3 mm accuracy. None of the imaging doses exceeded the limit of 5 cGy with a CT on rails system having the lowest overall dose. Conclusion: A phantom mimicking the decision making process for adaptive radiotherapy was found to be well suited during site visits for credentialing of centres participating in a clinical trial of adaptive radiotherapy for bladder cancer. Combined with a planning exercise the site visit allowed testing the ability of centres to create adaptive treatment plans and make appropriate decisions based on the volumetric images acquired at treatment.

VHDL basics applied design by SIPAC qualification system

International Nuclear Information System (INIS)

Park, In Ha; Mun, Da Cheol; Lee, Gwang Yeob

2005-12-01

This book has six chapters, which are about Flowrian of SIPAC qualification system including internet CAD system and remote server service, logic circuit on design and qualification of device such as gate circuit, multiplex and decoder, order logic circuit with D type flip-flop design and qualification and Rom and RAM's design and qualification, finite state machine such as odd checker, sequence detector, test clock generator and traffic light controller, design and qualification about data path, design of application circuit. It has two appendixes on install and the way to use SIPAC qualification system and remote service for SIPAC qualification system.

Status of Credentialing Structures Related to Secondary Transition: A State-Level Policy Analysis

Science.gov (United States)

Simonsen, Monica L.; Novak, Jeanne A.; Mazzotti, Valerie L.

2018-01-01

To understand the current status of transition-related credentialing systems in driving personnel preparation, it is necessary to identify which state education and rehabilitation services agencies are currently providing certification and licensure in the area of secondary transition. The purpose of this study was to examine the current state of…

FAQ about Recreational Therapy (RT)

Science.gov (United States)

... Recreation &Community Activities WHAT ARE A RECREATIONAL THERAPIST'S EDUCATION, QUALIFICATIONS, & CREDENTIALS? A qualified recreational therapist is someone who is nationally certified as a Certified Therapeutic Recreation Specialist (CTRS), usually referred to as Recreational ...

The Relationship Between Postsecondary Education and Skill: Comparing Credentialism with Human Capital Theory

Science.gov (United States)

Walters, David

2004-01-01

This paper assesses the importance of the credential requirements used by employers to attract graduates who will use their education on the job. The framework of this study is embedded within the theoretical debates between proponents of the credentialist and human capital theories of education. Past research related to these debates has focused…

Establishment of nuclear equipment qualification system

International Nuclear Information System (INIS)

Joo, Po Kook; Lim, Nam Jin; Lee, Young Gun

2003-04-01

This study is carried out by KEARI(Korea Atomic Energy Research Institute) as the lead organization in cooperation with KIMM(Korea Institute of Machinery and Materials), KTL(Korea Testing Laboratory) and KRISS(Korea Research Institute of Standards and Science) to construct a basis of efficient management of nuclear equipment qualification business by expanding test equipment of each of participating organization, and developing qualification technologies. As for KIMM, control system of large scale shaker was replaced with advanced system, and LOCA(Loss of Coolant Accident) test facility was installed. KTL is now capable of conducting seismic tests of nuclear I and C as a result of installation of seismic test equipment during the first two project years. KRISS participated in the Project with a view to have large scale EMI test equipment and related technologies. In parallel with expansion of test equipment, a industrial-educational-research cooperation committee, as an intermediate step toward integrated equipment qualification system to maximize the usage of test equipment, was established and cooperation methods were investigated. As a result, Korea Nuclear Equipment Qualification Association, an corporate juridical person, was established. Research on development of thermal and radiation aging test technology of nuclear materials was carried out by Hanyang University and SECO(Saehan Engineering and Qualification Co., Ltd.). Integrated Equipment Qualification Database was developed which contains material test data, equipment qualification data and other EQ related informations. Standard qualification procedures were developed in order for test laboratories and manufacturers to establish design requirements and to efficiently perform tests

Qualification of ISI for Bulgarian NPP: UK support

International Nuclear Information System (INIS)

Booler, R.

2000-01-01

UK Regulator (NII) Phare project provides an assistance to the Bulgarian Regulator in setting up the technical infrastructure for inspection qualification consistent with IAEA Guidelines and western European practice. The Strategy Document defines the methodology for inspection qualification and general roles and responsibilities of the involved organizations. The Qualification Inputs Document describes the information required for the Technical Specifications (component details, inspection aims and limitations). It applies the idea of qualification level - level 1(lowest) to level 3 (highest). The Qualification Procedure Document provides a guidance to the utility ('Kozloduy' NPP) on the preparation of Qualification Procedures (QP). The appendix provides a specific guidance on the performance of the all aspects of qualification at different levels and recommendations for technical justification. QB Method Working Document provides guidance for the Qualification Body. Facilities and Resources Document defines the facilities and resources required for the Qualification Body to perform the tasks described in the Method Working Document. High level QA Document defines the principles of quality control. Other issues and progress report are also presented

Assessing CPR training: The willingness of teaching credential candidates to provide CPR in a school setting.

Science.gov (United States)

Winkelman, Jack L; Fischbach, Ronald; Spinello, Elio F

2009-12-01

The study explores the anticipated willingness of teacher credential candidates at one California public university in the U.S. to perform cardiopulmonary resuscitation (CPR) or foreign body airway obstruction (FBAO) skills in a school setting. Objectives included (1) identifying reasons that credential candidates would elect or decline to perform CPR, (2) assisting schools to remediate cardiac/respiratory emergency preparedness, and (3) assessing CPR training courses to determine how they may influence teachers' willingness to perform CPR. Participants included 582 teacher credential candidates, who were 95.2% of those surveyed after completion of a health science course and CPR certification. Participants described their attitudes regarding the importance of CPR, the CPR training course, and their willingness to perform CPR in a school environment. Based upon chi-square analysis, an association was found between the willingness to perform CPR and the presence of any one concern regarding training, with 68.6% of those expressing concerns willing to perform CPR compared to 81.9% of those expressing no concerns (pteachers (76.9% vs. 43.5%, pteachers' willingness to perform CPR. Recommendations based on these findings include pedagogical changes to CPR curricula, focusing on the importance of CPR as a teacher skill and additional time for hands-on practice. Future research should include U.S. and international participants from a broader geographic area and assessment of both learning and affective outcomes.

Toward the Development of a Model to Estimate the Readability of Credentialing-Examination Materials

Science.gov (United States)

Badgett, Barbara A.

2010-01-01

The purpose of this study was to develop a set of procedures to establish readability, including an equation, that accommodates the multiple-choice item format and occupational-specific language related to credentialing examinations. The procedures and equation should be appropriate for learning materials, examination materials, and occupational…

The Relationship between Teacher Candidates' Attitudes towards Teacher Credentialing Courses and Instructor Behavior

Science.gov (United States)

Gül, Ibrahim

2017-01-01

The aim of this research is to examine the relationship between the attitudes of prospective teachers towards teaching profession courses and teaching staff behaviors. The research is a quantitative study. The study's study group is composed of 537 education faculty student. "Attitude Scale towards Credentialing Courses" and…

Pilot study approach and qualification dossier components

International Nuclear Information System (INIS)

Ammirato, F.; Ashwin, P.

2000-01-01

The aim of the Pilot Project is to evaluate the IAEA Guidelines and methodology for the benefit of IAEA Member States trough a simulation of qualification activities. The Project is based on a real component and available data - NPP Kozloduy unit 5, weld 3. The initial phase is limited to the Qualification dossier. The Project relies on the input from the team members and Member States. Team organization and responsibilities are presented. The components of the Qualification Dossier (technical specification, inspection procedure and preliminary review, qualification procedure) and their current status are also presented. A comparison is done with their qualification programs. The characteristics of performance demonstrations are discussed. The results show that the teamwork has been successful and the IAEA methodology covers all situations. It is expected that the End Project will become 'Benchmark's' for future qualification activities

Safe introduction of new procedures and emerging technologies in surgery: education, credentialing, and privileging.

Science.gov (United States)

Sachdeva, Ajit K; Russell, Thomas R

2007-08-01

Ongoing horizon scanning is needed to identify new procedures and emerging technologies that should be evaluated for introduction into surgical practice. Following evidence-based evaluation, if a new modality is found ready for adoption in practice, surgeons need education in the safe and effective use of the new modality. The educational experience should include structured teaching and learning, verification of new knowledge and skills, preceptoring or proctoring, and monitoring of outcomes. Credentialing and privileging to perform a new procedure or use an emerging technology should be based on evaluation of knowledge and skills and outcomes of surgical care, and not merely on the numbers of procedures performed. Education of the surgical team is also essential. The entire process involving education, verification of knowledge and skills, credentialing, and privileging must be transparent. Patients need to play a central role in making informed decisions regarding their care that involves use of a new procedure or an emerging technology, and they should participate actively in their perioperative care.

Paranormal belief and errors of probabilistic reasoning: The role of constituent conditional relatedness in believers' susceptibility to the conjunction fallacy.

Science.gov (United States)

Rogers, Paul; Fisk, John E; Lowrie, Emma

2017-11-01

The present study examines the extent to which stronger belief in either extrasensory perception, psychokinesis or life-after-death is associated with a proneness to making conjunction errors (CEs). One hundred and sixty members of the UK public read eight hypothetical scenarios and for each estimated the likelihood that two constituent events alone plus their conjunction would occur. The impact of paranormal belief plus constituents' conditional relatedness type, estimates of the subjectively less likely and more likely constituents plus relevant interaction terms tested via three Generalized Linear Mixed Models. General qualification levels were controlled for. As expected, stronger PK beliefs and depiction of a positively conditionally related (verses conditionally unrelated) constituent pairs predicted higher CE generation. ESP and LAD beliefs had no impact with, surprisingly, higher estimates of the less likely constituent predicting fewer - not more - CEs. Theoretical implications, methodological issues and ideas for future research are discussed. Copyright © 2017 Elsevier Inc. All rights reserved.

Online Systems for Oversize and Overweight Freight Permitting and Motor Carrier Credentialing : Transportation Research Synthesis.

Science.gov (United States)

2017-09-01

MnDOT uses two online systems implemented in the 1990s to issue and manage permits for oversize/overweight (OS/OW) freight and motor carrier credentials: - RouteBuilder, an OS/OW permitting system with a routing component. - Motor Carrier Information...

Veterans’ Health Care: Improved Oversight of Community Care Physicians Credentials Needed

Science.gov (United States)

2016-09-01

five of the most common types of care— obstetrics and gynecology, ophthalmology, primary care, psychiatry, and surgery—across each of the four census...Bank for verifying malpractice history .16 The standards also call for documentation of credentials verification activities, such that there is...Health Net and TriWest verify licenses, education and training, and malpractice history for each PC3 physician, and conduct reverification at least

Benefits of Digital Equipment Generic Qualification Activities

International Nuclear Information System (INIS)

Thomas, James E.; Steiman, Samuel C.

2002-01-01

As a result of nuclear power plant instrumentation and control obsolescence issues, there have been numerous activities during recent years relating to the qualification of digital equipment. Some of these activities have been 'generic' in nature in that the qualification was not limited to plant specific applications, but was intended to cover a broad base of potential applications of the digital equipment. These generic qualifications have been funded by equipment manufacturers and by utility groups and organizations. The generic activities sponsored by the Electric Power Research Institute (EPRI) have been pilot projects for an overall generic qualification approach. The primary benefit resulting from the generic qualification work to date is that a number of digital platforms and digital devices are now available for use in various nuclear safety-related applications. Many of the tests and evaluations necessary to support plant specific applications have been completed. The amount of data and documentation that each utility must develop on a case by case basis has been significantly reduced. There are also a number of additional benefits resulting from these industry efforts. The challenges and difficulties in qualifying digital equipment for safety-related applications are now more clearly understood. EPRI has published a lessons learned document (EPRI Report 1001452, Generic Qualification of Commercial Grade Digital Devices: Lessons Learned from Initial Pilots, which covers several different qualification areas, including device selection, project planning, vendor surveys and design reviews, and electromagnetic compatibility (EMC) qualification. Application of the experience and lessons learned from the EPRI pilot activities should help reduce the effort and cost required for future qualification work. Most generic qualification activities for commercial equipment have been conducted using the approach of EPRI TR-106439, Guideline on Evaluation and Acceptance

Stackable Credentials and Career/college Pathways in Culinary Arts at Kingsborough Community College, CUNY

Science.gov (United States)

Audant, Anne Babette

2016-01-01

Discussions of workforce development emphasize stackable training, and assume linear advancement and alignment, through college and career paths. Stackable credentials have become a best practice for community colleges across the United States as they struggle to advance the college completion agenda and ensure that students graduate with the…

49 CFR 180.507 - Qualification of tank cars.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Qualification of tank cars. 180.507 Section 180... QUALIFICATION AND MAINTENANCE OF PACKAGINGS Qualification and Maintenance of Tank Cars § 180.507 Qualification of tank cars. (a) Each tank car marked as meeting a “DOT” specification or any other tank car used...

Educational Credentialism and Elite Formation in Japan: A Long-term Perspective

OpenAIRE

Daiji Kawaguchi; Hiroshi Ono

2013-01-01

In spite of the significant restructuring of the university system in the postwar period, national universities continue to occupy the top end of the prestige hierarchy of universities in Japan. In this paper, we examine long-term trends in the educational credentials of Japanese corporate executives. We use high-quality data from the directory of corporate executives to assess whether the mechanisms of elite production has changed over time. We find that the fraction of corporate executives ...

ENIQ: European Network for Inspection Qualification

International Nuclear Information System (INIS)

Champigny, F.; Crutzen, S.; Lemaitre, P.

1995-01-01

Many countries are currently considering their own approach to inspection qualification and are carefully assessing experience to date. ENIQ, which stands for European Network for Inspection Qualification, groups the major part of the utilities in Western Europe. The general objective of ENIQ is to coordinate and manage at European level expertise and resources for the assessment and qualification of NDE inspection techniques and procedures, primarily for nuclear components. Also non-nuclear heavy duty components will be considered. Within ENIQ there is a growing consensus of opinion on the general principles of a European approach towards inspection qualification. In this paper the main activities, organization and actual status of ENIQ will be discussed

MO-D-213-08: Remote Dosimetric Credentialing for Clinical Trials with the Virtual EPID Standard Phantom Audit (VESPA)

International Nuclear Information System (INIS)

Lehmann, J; Miri, N; Vial, P; Hatton, J; Zwan, B; Sloan, K; Craig, A; Beenstock, V; Molloy, T; Greer, P

2015-01-01

Purpose: Report on implementation of a Virtual EPID Standard Phantom Audit (VESPA) for IMRT to support credentialing of facilities for clinical trials. Data is acquired by local facility staff and transferred electronically. Analysis is performed centrally. Methods: VESPA is based on published methods and a clinically established IMRT QA procedure, here extended to multi-vendor equipment. Facilities, provided with web-based comprehensive instructions and CT datasets, create IMRT treatment plans. They deliver the treatments directly to their EPID without phantom or couch in the beam. They also deliver a set of simple calibration fields. Collected EPID images are uploaded electronically. In the analysis, the dose is projected back into a virtual phantom and 3D gamma analysis is performed. 2D dose planes and linear dose profiles can be analysed when needed for clarification. Results: Pilot facilities covering a range of planning and delivery systems have performed data acquisition and upload successfully. Analysis showed agreement comparable to local experience with the method. Advantages of VESPA are (1) fast turnaround mainly driven by the facility’s capability to provide the requested EPID images, (2) the possibility for facilities performing the audit in parallel, as there is no need to wait for a phantom, (3) simple and efficient credentialing for international facilities, (4) a large set of data points, and (5) a reduced impact on resources and environment as there is no need to transport heavy phantoms or audit staff. Limitations of the current implementation of VESPA for trials credentialing are that it does not provide absolute dosimetry, therefore a Level 1 audit still required, and that it relies on correctly delivered open calibration fields, which are used for system calibration. Conclusion: The implemented EPID based IMRT audit system promises to dramatically improve credentialing efficiency for clinical trials and wider applications. VESPA for VMAT

MO-D-213-08: Remote Dosimetric Credentialing for Clinical Trials with the Virtual EPID Standard Phantom Audit (VESPA)

Energy Technology Data Exchange (ETDEWEB)

Lehmann, J [Calvary Mater Newcastle, Newcastle, NSW (Australia); University of Sydney, Sydney, NSW (Australia); Miri, N [University of Newcastle, Newcastle, NSW (Australia); Vial, P [Liverpool Hospital, Liverpool, NSW (Australia); Hatton, J [Trans Tasman Radiation Oncology Group (TROG), Newcastle, NSW (Australia); Zwan, B; Sloan, K [Gosford Hospital, Gosford, NSW (Australia); Craig, A; Beenstock, V [Canterbury Regional Cancer and Haematology Service, Christchurch (New Zealand); Molloy, T [Orange Hospital, Orange, NSW (Australia); Greer, P [Calvary Mater Newcastle, Newcastle, NSW (Australia); University of Newcastle, Newcastle, NSW (Australia)

2015-06-15

Purpose: Report on implementation of a Virtual EPID Standard Phantom Audit (VESPA) for IMRT to support credentialing of facilities for clinical trials. Data is acquired by local facility staff and transferred electronically. Analysis is performed centrally. Methods: VESPA is based on published methods and a clinically established IMRT QA procedure, here extended to multi-vendor equipment. Facilities, provided with web-based comprehensive instructions and CT datasets, create IMRT treatment plans. They deliver the treatments directly to their EPID without phantom or couch in the beam. They also deliver a set of simple calibration fields. Collected EPID images are uploaded electronically. In the analysis, the dose is projected back into a virtual phantom and 3D gamma analysis is performed. 2D dose planes and linear dose profiles can be analysed when needed for clarification. Results: Pilot facilities covering a range of planning and delivery systems have performed data acquisition and upload successfully. Analysis showed agreement comparable to local experience with the method. Advantages of VESPA are (1) fast turnaround mainly driven by the facility’s capability to provide the requested EPID images, (2) the possibility for facilities performing the audit in parallel, as there is no need to wait for a phantom, (3) simple and efficient credentialing for international facilities, (4) a large set of data points, and (5) a reduced impact on resources and environment as there is no need to transport heavy phantoms or audit staff. Limitations of the current implementation of VESPA for trials credentialing are that it does not provide absolute dosimetry, therefore a Level 1 audit still required, and that it relies on correctly delivered open calibration fields, which are used for system calibration. Conclusion: The implemented EPID based IMRT audit system promises to dramatically improve credentialing efficiency for clinical trials and wider applications. VESPA for VMAT

Impact of the draft DOE Training and Qualification Standard on an established training and qualification program

International Nuclear Information System (INIS)

Taylor, R.G.; Worley, C.A.

1999-01-01

One of the provisions of Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 97-2 was that the US Department of Energy (DOE) hor e llipsis Develop and institute ahor e llipsiscourse in criticality and criticality safety hor e llipsis to serve as the foundation for a program of formal qualification of criticality engineers. In response, a draft DOE standard establishing requirements for a formal qualification program for nuclear criticality safety (NCS) engineers has been prepared and is currently in review. The Oak Ridge Y-12 plant implemented a formal training and qualification program for NCS engineers in 1995. The program complies with existing DOE requirements. The program was developed using a performance-based systematic approach to training and is accomplished through structured mentoring where experienced personnel interact with candidates through various learning exercises. Self-study, exercises, and work under instruction are all utilized. The candidate's performance is evaluated by mentors and oral boards. Competency gained through experience at other sites can also be credited. Technical portions of the program are primarily contained in an initial Engineer-in-Training segment and in subsequent task-specific qualifications. The Engineer-in-Training segment exposes the candidate to fundamental NCS concepts through example problems; ensures the initial compliance training requirements are met; and includes readings from applicable procedures, technical documents, and standards. Upon completion of this initial training, candidates proceed to task qualifications. Tasks are defined NCS activities such as operational reviews, criticality safety evaluations, criticality safety computations, criticality accident alarm system (CAAS) evaluations, support for emergency management, etc. Qualification on a task basis serves to break up training into manageable pieces and expedites qualification of candidates to perform specific production activities. The

One-to-One Laptop Teacher Education: Does Involvement Affect Candidate Technology Skills and Dispositions?

Science.gov (United States)

Donovan, Loretta; Green, Tim; Hansen, Laurie E.

2012-01-01

This study compares teacher candidates' initial and changed beliefs, dispositions, and uses of technology in two credential program models: a one-to-one laptop program with ubiquitous technology use and a traditional credential program in which students are expected to have specific technology experiences and requirements in each course (a model…

Equipment qualification testing methodology research at Sandia Laboratories

International Nuclear Information System (INIS)

Jeppesen, D.

1983-01-01

The Equipment Qualification Research Testing (EQRT) program is an evolutionary outgrowth of the Qualification Testing Evaluation (QTE) program at Sandia. The primary emphasis of the program has been qualification methodology research. The EQRT program offers to the industry a research-oriented perspective on qualification-related component performance, as well as refinements to component testing standards which are based upon actual component testing research

14 CFR 121.453 - Flight engineer qualifications.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Flight engineer qualifications. 121.453... REQUIREMENTS: DOMESTIC, FLAG, AND SUPPLEMENTAL OPERATIONS Crewmember Qualifications § 121.453 Flight engineer qualifications. (a) No certificate holder may use any person nor may any person serve as a flight engineer on an...

Title VII and the Masters of Reality: Eliminating Credentialism in the American Labor Market.

Science.gov (United States)

White, David M.; Francis, Richard L.

1976-01-01

Examines effects of a Supreme Court decision (Gribbs vs Duke Power Co., 1971) stating that job applicants need neither pass an intelligence test nor possess particular educational credentials unless they are directly related to the requirements of the job. Journal available from Georgetown University Law Center, 600 New Jersey Ave., NW,…

Materials qualification for nuclear power plants

International Nuclear Information System (INIS)

Braconi, F.

1987-01-01

The supply of materials to be used in the fabrication of components submitted to pressure destined to Atucha II nuclear power plant must fulfill the quality assurance requirements in accordance with the international standards. With the aim of promoting the national participation in CNA II, ENACE had the need to adapt these requirements to the national industry conditions and to the availability of official entities' qualification and inspection. As a uniform and normalized assessment for the qualification of materials did not exist in the country, ENACE had to develop a materials suppliers qualification system. This paper presents a suppliers qualification procedure, its application limits and the alternative procedures for the acceptance of individual stock and for the stock materials purchase. (Author)

Entrepreneurship Education

DEFF Research Database (Denmark)

Robinson, Sarah; Shumar, Wesley

2015-01-01

A deep concern about how higher education worldwide has become more narrowly focused on the economy, on qualification and credentialing brings the focus in this paper to Entrepreneurship Education (EE) as an opportunity for purposeful education. We suggest that the present climate has produced...... a kind of legitimacy crisis in that the only knowledge that is socially valued is knowledge that is already seen to have economic value. These arguments have already been developed in literature on the commodification of the university (Shumar 1997), the market mantra of neoliberalism on education (Blum...... education is supposed to be for the good of the economy, and in addition, the individual and society may benefit. We question whether this approach to higher education under neoliberal reform is likely to stimulate individuals. From the standpoint of the individual, pursuing qualifications for credentials...

Unintended Consequences: How Qualification Constrains Innovation

Science.gov (United States)

Brice, Craig A.

2011-01-01

The development and implementation of new materials and manufacturing processes for aerospace application is often hindered by the high cost and long time span associated with current qualification procedures. The data requirements necessary for material and process qualification are extensive and often require millions of dollars and multiple years to complete. Furthermore, these qualification data can become obsolete for even minor changes to the processing route. This burden is a serious impediment to the pursuit of revolutionary new materials and more affordable processing methods for air vehicle structures. The application of integrated computational materials engineering methods to this problem can help to reduce the barriers to rapid insertion of new materials and processes. By establishing predictive capability for the development of microstructural features in relation to processing and relating this to critical property characteristics, a streamlined approach to qualification is possible. This paper critically examines the advantages and challenges to a modeling-assisted qualification approach for aerospace structural materials. An example of how this approach might apply towards the emerging field of additive manufacturing is discussed in detail.

Establishment of an unrelated umbilical cord blood bank qualification program: ensuring quality while meeting Food and Drug Administration vendor qualification requirements.

Science.gov (United States)

Rabe, Fran; Kadidlo, Diane; Van Orsow, Lisa; McKenna, David

2013-10-01

Qualification of a cord blood bank (CBB) is a complex process that includes evaluation of multiple aspects of donor screening and testing, processing, accreditation and approval by professional cell therapy groups, and results of received cord blood units. The University of Minnesota Medical Center Cell Therapy Laboratory has established a CBB vendor qualification process to ensure the CBB meets established regulatory and quality requirements. The deployed qualification of CBBs is based on retrospective and prospective review of the CBB. Forty-one CBBs were evaluated retrospectively: seven CBBs were disqualified based on failed quality control (QC) results. Eight CBBs did not meet the criteria for retrospective qualification because fewer than 3 cord blood units were received and the CBB was not accredited. As of March 2012, three US and one non-US CBBs have been qualified prospectively. One CBB withdrew from the qualification process after successful completion of the comprehensive survey and subsequent failure of the provided QC unit to pass the minimum criteria. One CBB failed the prospective qualification process based on processing methods that were revealed during the paper portion of the evaluation. A CBB qualification process is necessary for a transplant center to manage the qualification of the large number of CBBs needed to support a umbilical cord blood transplantation program. A transplant center that has utilized cord blood for a number of years before implementation of a qualification process should use a retrospective qualification process along with a prospective process. © 2013 American Association of Blood Banks.

Generating solutions : summary of the Electricity Sector Council's review of foreign credential recognition

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-03-15

The Electricity Sector Council has recognized the increasing requirement to recruit and retain internationally trained workers to offset the anticipated retirement of up to 40 per cent of skilled workers in this sector by 2014. This document provided a brief summary of the review of foreign credential recognition in Canada's Electricity Council which was prepared in February 2008. The purpose of the study was to capture a perceptive picture of Canada's electricity labour force and to assist the Electricity Sector Council in the potential development and implementation of strategies to facilitate the integration of internationally trained workers into Canada's electricity sector. This synopsis report presented the analysis of the study including a discussion of immigration trends; foreign credential recognition in Canada's electricity sector; immigration profiles by region; case study profiles; and recommendations. It was recommended that resources be researched, developed and provided in order to help stakeholders attract, recruit, retain and integrate internationally trained workers. 2 refs.

Instrumentation qualification. Seismic qualification of C-E instrumentation equipment. Part One

International Nuclear Information System (INIS)

1977-05-01

A summary of the C-E seismic qualification program utilized to demonstrate the seismic design adequacy of the instrumentation and control equipment used in C-E supplied Nuclear Steam Supply Systems (NSSS) is presented. The report is divided into two parts. Part One includes the equipment seismic requirements and a description of the qualification methods. Part Two lists the specific equipment by nuclear station in which it is used and the equipment test results are summarized in a standard data sheet format to facilitate review. The seismic requirements are based on individual contract commitments with C-E customers and the NRC Standard Review Plan, Section 3.10 ''Seismic Qualification of Category I Instrumentation and Electrical Equipment.'' Equipment is qualified for use in a seismic environment where damage potential to the equipment is less than or equal to that simulated seismic environment to which it has been qualified. The anticipated Safe Shutdown Earthquake (SSE) environment at the inservice location of equipment should be confirmed by each applicant as not exceeding that to which it is qualified

Robotics in otolaryngology and head and neck surgery: Recommendations for training and credentialing

Science.gov (United States)

Gross, Neil D.; Holsinger, F. Christopher; Magnuson, J. Scott; Duvvuri, Umamaheswar; Genden, Eric M.; Ghanem, Tamer AH.; Yaremchuk, Kathleen L.; Goldenberg, David; Miller, Matthew C.; Moore, Eric J.; Morris, Luc GT.; Netterville, James; Weinstein, Gregory S.; Richmon, Jeremy

2016-01-01

Training and credentialing for robotic surgery in otolaryngology - head and neck surgery is currently not standardized, but rather relies heavily on industry guidance. This manuscript represents a comprehensive review of this increasingly important topic and outlines clear recommendations to better standardize the practice. The recommendations provided can be used as a reference by individuals and institutions alike, and are expected to evolve over time. PMID:26950771

Nuclear energy electricity technical regulation on the qualification

International Nuclear Information System (INIS)

1995-01-01

It tells the range of application purpose and of the qualification. It describes how to qualify of the class 1 E equipment, which are type test, operating experience, analysis and combined method. Next it deals with qualification procedure, which are specification requirement, requirement of qualification program, type testing, operating experience, analysis and combined qualification, acceptance criteria modification and extension with qualified life, simulated test profiles and document about type test data, operating experience data and extrapolation.

Changing existing qualifications into outcomes-based qualifications ...

African Journals Online (AJOL)

Various workshops were facilitated to determine the outcomes of each level of our qualification, B Tech: Policing. This led to the formulation of a purpose statement, exit level outcomes and specific outcomes as well as assessment criteria and the critical outcomes embedded in each level identified. Using the specific ...

Networks for Success: Preparing Mexican American AVID College Students for Credentials, Completion, and the Workforce

Science.gov (United States)

Kirk, Richard; Watt, Karen M.

2018-01-01

This qualitative study examines how Mexican American students participating in an AVID for Higher Education course perceived their preparation for the workforce and efficacy of completing a college credential. A focus group approach was used to explore how social and cultural networks (networks for success) contribute to college completion. The…

48 CFR 1553.209 - Contractor qualifications.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Contractor qualifications. 1553.209 Section 1553.209 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION AGENCY CLAUSES AND FORMS FORMS Prescription of Forms 1553.209 Contractor qualifications. ...

On relaxing the Mangasarian-Fromovitz constraint qualification

Czech Academy of Sciences Publication Activity Database

Kruger, A.Y.; Minchenko, L.; Outrata, Jiří

2014-01-01

Roč. 18, č. 1 (2014), s. 171-189 ISSN 1385-1292 R&D Projects: GA ČR GAP402/12/1309 Institutional support: RVO:67985556 Keywords : Nonlinear programming * Regularity conditions * Constraint qualifications * Lagrange multipliers * Mangasarian–Fromovitz constraint qualification * Constant rank constraint qualification Subject RIV: BA - General Mathematics Impact factor: 0.679, year: 2014 http://library.utia.cas.cz/separaty/2014/MTR/outrata-0426110.pdf

5 CFR 317.502 - Qualifications Review Board certification.

Science.gov (United States)

2010-01-01

... REGULATIONS EMPLOYMENT IN THE SENIOR EXECUTIVE SERVICE Career Appointments § 317.502 Qualifications Review Board certification. (a) A Qualification Review Board (QRB) convened by OPM must certify the executive... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Qualifications Review Board certification...

Nuclear Criticality Safety Department Qualification Program

International Nuclear Information System (INIS)

Carroll, K.J.; Taylor, R.G.; Worley, C.A.

1996-01-01

The Nuclear Criticality Safety Department (NCSD) is committed to developing and maintaining a staff of highly qualified personnel to meet the current and anticipated needs in Nuclear Criticality Safety (NCS) at the Oak Ridge Y-12 Plant. This document defines the Qualification Program to address the NCSD technical and managerial qualification as required by the Y-1 2 Training Implementation Matrix (TIM). This Qualification Program is in compliance with DOE Order 5480.20A and applicable Lockheed Martin Energy Systems, Inc. (LMES) and Y-1 2 Plant procedures. It is implemented through a combination of WES plant-wide training courses and professional nuclear criticality safety training provided within the department. This document supersedes Y/DD-694, Revision 2, 2/27/96, Qualification Program, Nuclear Criticality Safety Department There are no backfit requirements associated with revisions to this document

48 CFR 53.209 - Contractor qualifications.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Contractor qualifications. 53.209 Section 53.209 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION (CONTINUED) CLAUSES AND FORMS FORMS Prescription of Forms 53.209 Contractor qualifications. ...

78 FR 17917 - Medical Waivers for Merchant Mariner Credential Applicants With a History of Seizure Disorders

Science.gov (United States)

2013-03-25

... be considered for a waiver. (1) Mariners with a history of epilepsy or seizure disorder may be... Waivers for Merchant Mariner Credential Applicants With a History of Seizure Disorders AGENCY: Coast Guard... of seizure disorders. Coast Guard regulations provide that convulsive disorders (also known as...

Perspectives on Terminology and Conceptual and Professional Issues in Health Education and Health Promotion Credentialing

Science.gov (United States)

Taub, Alyson; Allegrante, John P.; Barry, Margaret M.; Sakagami, Keiko

2009-01-01

This article was prepared to inform the deliberations of the Galway Consensus Conference by providing a common and global reference point for the discussion of terminology and key conceptual and professional issues in the credentialing of health education and health promotion specialists. The article provides a review of the terminology that is…

Assessment-Oriented Learning and Adult Work--An International Study.

Science.gov (United States)

Higher Education in Europe, 1984

1984-01-01

A recently begun longitudinal study of a trend toward credentialism or qualifications-orientation among adult students in six countries (India, Japan, Malaysia, Nigeria, Sri Lanka, and England) is described. The development of measures of student learning orientations for different cultures is discussed. (MSE)

Vocational training and career employment precariousness in Great Britain, the Netherlands and Sweden

NARCIS (Netherlands)

Korpi, T.; Graaf, de P.; Hendrickx, J.; Layte, R.

2003-01-01

The skills, qualifications and credentials generated by educational systems are strongly related to labour market attainment. The centrality of the educational system for the structuring of individuals' life chances has generated a long-lived and intense debate around the proper design of

Vocational Training and Career Employment Precariousness in Great Britain, the Netherlands and Sweden

NARCIS (Netherlands)

Korpi, Tomas; Graaf, Paul de; Hendrickx, John; Layte, Richard

2003-01-01

The skills, qualifications and credentials generated by educational systems are strongly related to labour market attainment. The centrality of the educational system for the structuring of individuals’ life chances has generated a long-lived and intense debate around the proper design of

Application of operating experience in environmental qualification program

International Nuclear Information System (INIS)

Lee, S.Y.; Wise, R.

2000-01-01

Environmental qualification (EQ) of equipment related to nuclear safety has been carried out in the nuclear community since the 70's. It started with electrical equipment and then expanded to include mechanical equipment. During this evolutionary process, the methods used for EQ have gone through a long period of refinement and clarification. Prior to 1971, qualification for equipment in licensed nuclear power plants was based on the use of electrical components of commonly accepted high industrial quality without the benefit of specific environmental qualification standards. Between 1971 and 1974, most plants used the criteria of IEEE Standard 323-1971 as the basis for demonstrating qualification. Also during this period related 'daughter' standards, mainly by IEEE, became available which addressed qualification for specific equipment items. After July 1974, plants were required to meet the more comprehensive guidelines specified in IEEE Standard 323-1974 and the related 'daughter' standards. IEEE Standard 323-1974 later evolved into IEEE Standard 323-1983. For nuclear power plants built in Ontario during the 70's, i.e. Pickering B and Bruce B, has included the environmental qualification requirements in their respective nuclear safety design guides. It is now recognized that they are not up to the current EQ standards. Darlington, constructed during the 80's, implemented the environmental qualification program in its project. An Environmental Qualification (EQ) Program is now under way in Ontario Power Generation (OPG) to formally implement the Environmental Qualification for Bruce B, Pickering B, and Pickering A and to preserve the Qualification for Darlington G.S. This paper makes a thorough a review of the standard methods used in the past by utilities for environmental qualification. These methods include type testing, analysis, and operating experience. Both type testing and analysis have been clearly defined in standards listed in References [2] to [6] and

Qualification tests for a dosimetry system

International Nuclear Information System (INIS)

Anon.

2005-01-01

The report of qualification tests for personnel dosemeters is detailed. Qualification test for the energy response and the incidence angle is given. The procedure of test is resumed. Different coefficients of conversion used in these tests are given in tables. (N.C.)

48 CFR 253.209 - Contractor qualifications.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Contractor qualifications. 253.209 Section 253.209 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CLAUSES AND FORMS FORMS Prescription of Forms 253.209 Contractor qualifications. ...

Inspection qualification and implementation of ENIQ in Sweden

International Nuclear Information System (INIS)

Zettervall, Tommy

2013-01-01

Many countries are currently considering their approaches to inspection qualification and risk-informed in-service inspection (RI-ISI) and are carefully assessing experience data. In Europe most of the utilities operating nuclear power plants have joined together to form the European Network for Inspection Qualification ENIQ. In practice, qualification can be performed with varying degrees of complexity and cost, varying from capability statement based on existing evidence, through to an extensive qualification consisting of a detailed Technical Justification (TJ) together with open and blind trials on full-scale test blocks. An Inspection Qualification is an investigation and demonstration, which confirm that an inspection system has the ability to solve its specific tasks. The qualification is a Quality Assurance of an inspection system based on documents and practical trials. A reliable inspection system, based on a reliable qualification and correct prerequisites, will reduce total costs for Licensees and increase the credibility of the inspection result. To get such inspection system, which could be valid for many years, it's of necessity to fulfil all included parts in the process. It begins with the Technical Specification from Licensee, where input data and requirements about the actual component are specified. To get an inspection system that could live over time, the Technical Justification is of importance. Finally the test blocks and used simulation techniques play an important part of the final result, and these test blocks together with TJ form the basis for qualification body's decision. (author)

Similarity principles for equipment qualification by experience

International Nuclear Information System (INIS)

Kana, D.D.; Pomerening, D.J.

1988-07-01

A methodology is developed for seismic qualification of nuclear plant equipment by applying similarity principles to existing experience data. Experience data are available from previous qualifications by analysis or testing, or from actual earthquake events. Similarity principles are defined in terms of excitation, equipment physical characteristics, and equipment response. Physical similarity is further defined in terms of a critical transfer function for response at a location on a primary structure, whose response can be assumed directly related to ultimate fragility of the item under elevated levels of excitation. Procedures are developed for combining experience data into composite specifications for qualification of equipment that can be shown to be physically similar to the reference equipment. Other procedures are developed for extending qualifications beyond the original specifications under certain conditions. Some examples for application of the procedures and verification of them are given for certain cases that can be approximated by a two degree of freedom simple primary/secondary system. Other examples are based on use of actual test data available from previous qualifications. Relationships of the developments with other previously-published methods are discussed. The developments are intended to elaborate on the rather broad revised guidelines developed by the IEEE 344 Standards Committee for equipment qualification in new nuclear plants. However, the results also contribute to filling a gap that exists between the IEEE 344 methodology and that previously developed by the Seismic Qualification Utilities Group. The relationship of the results to safety margin methodology is also discussed. (author)

Equipment qualification testing - a practical approach

International Nuclear Information System (INIS)

Davies, G.A.; McDougall, R.I.; Poirier, M.P.

1996-01-01

When nuclear safety equipment is credited with a Required Safety Function it must properly perform that function to facilitate safe control and/or shutdown of the plant during a design basis accident. When such equipment is required to be environmentally (EQ) and/or seismically qualified (SQ) for safety related use in CANDU nuclear power plants, the preferred method of qualification is by type testing. The qualification testing process requires that the test specimen equipment be subjected to the aging stressors associated with the normal service conditions that it would experience during it's required qualified (or service) life. Following the aging process, the test specimen is in a condition representative of that in which it would be at the end of its service life in the plant. The test specimen is then subjected to a simulated accident during which it must satisfy performance requirements thereby demonstrating that it can perform its required safety function. The performance requirements specified for the qualification testing must be designed to ensure that satisfactory performance of the safety function is demonstrated during the qualification program. This paper provides descriptions of practical methods used in the deriving and satisfying of relevant performance requirements during the qualification testing of safety related equipment. (author)

Total qualification of class 1E electric equipment

International Nuclear Information System (INIS)

Chauvin, G.

1982-09-01

For nuclear power plant projects in France, Framatome and its partners Electricite de France (EDF) and the Commissariat a l'Energie Atomique (CEA) have responded to the present qualification context by implementing a wide-ranging qualification program to acquire significant organizational and practical experience. The following sections detail Framatome's approach to the activities of an organization mandated to provide a complete spectrum of qualification services. Thorough implementation of a Class 1E electric equipment qualification program by the competent organization or qualifier entails completion of three consecutive steps: 1) program preparation, 2) program implementation, and 3) analysis of test results and conclusion. The qualifier assumes extensive responsibility for each of these steps. The following sections present test facilities used in France to conduct a total qualification program for Class 1E electric equipment

Qualification criteria for persons responsible for radiation protection

International Nuclear Information System (INIS)

Wehner, G

1980-01-01

A survey of the qualification criteria included in the German atomic law (Atomic Energy Act, Radiological Protection Ordinance and X-ray Protection Ordinance) for persons responsible for radiation protection is given. Especially the various activities for which a health physics officer is required, the range of qualification in each case and the way the qualification has to be proved, are pointed out. Also the different guides that are issued to complete the legal requirements are mentioned. The definitions of the term qualification for health physics given in the different guides are cited and it is shown, that the qualification of a healt physics officer has to be based on the three criteria (I) vocational training. (II) professional experience and (III) the necessary knowledge in radiation protection. (orig./HP) [de

USAR Credentialing Process Effect on Provider Participation in Medical Readiness Training Exercises and Deployments

Science.gov (United States)

2016-06-10

APMC, the individual? 4. How are providers notified of delinquencies in their credentialing packet? i.e. something expired or there is a pending...interviews, web site, and doctrine comparisons, very little variance in those areas provide minimal impact on the participation rate of providers in...are points of frustration for practitioners however, the impact that they have is mitigated by the redundancies and good communication between all

Safety design guides for environmental qualification for CANDU 9

International Nuclear Information System (INIS)

Lee, Duk Su; Chang, Woo Hyun; Lee, Nam Young; A. C. D. Wright

1996-03-01

This safety design guide describes the safety philosophy and requirements for the environmental qualification of safety related systems and components for CANDU 9. The environmental qualification program identifies the equipments to be qualified and conditions to be used for qualification and provides comprehensive set of documentation to ensure that the qualification is complete and can be maintained for the life of the plant. A summary of the system, components and structures requiring environmental qualification is provided in the table for the guidance of the system design, and this table will be subject to change or confirmation by the environmental qualification program. Also, plant ares subject to harsh environment is provided in the figure. The change status of the regulatory requirements, code and standards should be traced and this safety design guide shall be updated accordingly. 1 tab., 5 figs. (Author) .new

Equipment Qualification Data Base user manual

International Nuclear Information System (INIS)

Decker, Q.R.; Fackrell, L.J.; Fitch, L.R.; Meeky, O.B.

1985-09-01

This manual details the Equipment Qualification Data Base (EQDB), its usage, and contents. The EQDB consists of two files; the Plant Qualification File (PQF) and the Equipment Qualification File (EQF). The PQF contains plant specific environmental data and the EQF contains summaries of various test results. Two data management systems are used to manipulate the data and are discussed in this manual. SAS Institute System 2000 (S2K) is the management system for the PQF and Query Update (QU) is the operating system for the EQF. Each management system contains report writers. These writers and how to use them are discussed in detail in this manual

Solar array qualification through qualified analysis

Science.gov (United States)

Zijdemans, J.; Cruijssen, H. J.; Wijker, J. J.

1991-04-01

To achieve qualification is in general a very expensive exercise. For solar arrays this is done by a dedicated test program through which final qualification is achieved. Due to severe competition on the solar array market, cheaper means are looked for to achieve a qualified product for the customers. One of the methods is to drastically limit the environmental test program and to qualify the solar-array structure against its environmental loads by analysis. Qualification by analysis is possible. The benefits are that a significant amount of development effort can be saved in case such a powerful tool is available. Extensive testing can be avoided thus saving time and money.

Implementation plans for the Korean certified tumor registrar qualification system.

Science.gov (United States)

Boo, Yoo-Kyung; Lim, Hyun-Sook; Won, Young-Joo

2014-01-01

Cancer registration data is used to understand the nation's cancer burden, and to provide significant baseline data for cancer control efforts, as well as, research on cancer incidence, mortality, survival, and prevalence. A system that approves, assesses, and manages the qualification of specialists, responsible for performing cancer registration, has not been developed in Korea. This study presents ways to implement a certification system designed for the qualification of tumor registrars in Korea. Requirements for implementing a certified tumor registrar qualification system were determined by reviewing the system for establishing qualifications in Korea and the American qualification system via the National Cancer Registrars Association (NCRA). Moreover, a survey was conducted on Korean medical records administrators, who had taken the U.S. Certified Tumor Registrar (CTR) examination, in order to review their opinions regarding these requirements. This study verified the feasibility of a qualification examination based on the opinions of CTR specialists by determining the following: items, and the associated ratings, of the qualifications necessary to register individuals as certified tumor registrars in a private qualification system; status of human resources required for the examination or training processes; plans regarding the organization needed for management, and operation of qualifications, examination standards, subject areas, examination methods, examination qualifications, or education and training programs. The implementation of a certified tumor registrar qualification system will lead to enhanced job competency for specialists and a qualitative improvement of cancer registration data. It will also reliably foster human resources that will lay the groundwork needed to establish scientific and reasonable national cancer management policies.

Approach to customer qualification of the BNFL Sellafield Mox Plant

International Nuclear Information System (INIS)

Sullivan, P.

2003-01-01

BNFL started plutonium commissioning of its Sellafield MOX Plant (SMP) in December 2001, with the first MOX pellets being produced in May 2002. SMP was designed to manufacture a range of both PWR and BWR fuel types for a number of different customers. During commissioning and early MOX fuel manufacturing BNFL has been demonstrating its ability to both automatically manufacture and inspect MOX fuel to meet the requirements of different customers' specifications and fuel types. The qualification project consisted of common and project specific qualification. Common qualification was carried out to demonstrate BNFL could meet several customers' requirements during the same qualification test. Project specific qualification was carried out for one customer only as the fabrication or inspection equipment was specific to their fuel type. An example is the fuel assembly process. The reasons for BNFL carrying out common qualification were: - Develop a common qualified process to meet different customer specifications. - Minimise future qualifications prior to starting future fuel campaigns. - Ensure BNFL understands and effectively manages different customer requirements in SMP. BNFL has approached qualification of SMP systematically. Firstly the inspection system was qualified, and once completed the inspection system was then used in the qualification of the manufacturing process. (orig.)

49 CFR 214.351 - Training and qualification of flagmen.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Training and qualification of flagmen. 214.351... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY Roadway Worker Protection § 214.351 Training and qualification of flagmen. (a) The training and qualification for roadway workers assigned the...

On safety 1E qualification of electrical equipment for nuclear power stations

International Nuclear Information System (INIS)

Segarceanu, D.; Geambasu, C.; Avramescu, M.

1995-01-01

Electrical equipment and systems for the emergency shutdown of a nuclear reactor are qualified according to safety class 1E. Methods of qualification meeting the requirements should be used, either individually or in combination include, type-test qualification, qualification by operating experience, qualification by analysis, combined qualification. These methods qualification principles, procedures and documents are discussed. (N.T.). 1 fig

The use of psychometrists in clinical neuropsychology: history, current status, and future directions.

Science.gov (United States)

Malek-Ahmadi, Michael; Erickson, Tom; Puente, Antonio E; Pliskin, Neil; Rock, Rachel

2012-01-01

In recent years, the National Academy of Neuropsychology and other professional neuropsychological organizations have published a number of articles and position papers regarding the use, education, and training of psychometrists ("technicians"). Although these documents provide guidelines for the suggested qualifications and training procedures of psychometrists, none make any mention of the need for a standardized credentialing process, which is commonly required of technicians in similar fields, especially in medical settings. Given the recent changes in current procedural Terminology codes used to bill for neuropsychological services and the interpretation of legislation disallowing the use of psychometrists in New York, the need for a standard credential for psychometrists is apparent. This article will review the history and current use of psychometrists in clinical neuropsychology and highlight the need and rationale for the credentialing of psychometrists.

Guidelines for seismic qualification by experience in ALWRs

International Nuclear Information System (INIS)

Bandyopadhyay, K.K.

1994-01-01

The methodologies and acceptance criteria for seismic qualification of equipment are provided in IEEE Std. 344 endorsed by the Nuclear Regulatory Commission (NRC) in the Standard Review Plan. The IEEE Standard allows seismic qualification by use of the similarity analysis method. Data available from past earthquake events or vibration tests can be used in this regard. The nuclear industry has collected a vast amount of earthquake experience and test data in the last decade, and is planning to use it for seismic qualification of equipment in advanced light water reactor (ALWR) plants. This paper discusses the existing data bases including their limitations and describes the ways these data bases can be used for equipment qualification in ALWR plants

Guidelines for seismic qualification by experience in ALWRs

International Nuclear Information System (INIS)

Bandyopadhyay, K.K.

1993-01-01

The methodologies and acceptance criteria for seismic qualification of equipment are provided in IEEE Std. 344 endorsed by the Nuclear Regulatory Commission (NRC) in the Standard Review Plan. The IEEE Standard allows seismic qualification by use of the similarity analysis method. Data available from past earthquake events or vibration tests can be used in this regard. The nuclear industry has collected a vast amount of earthquake experience and test data in the last decade, and is planning to use it for seismic qualification of equipment in advanced light water reactor (ALWR) plants. This paper discusses the existing data bases including their limitations and describes the ways these data bases can be used for equipment qualification in ALWR plants

Safety review for seismic qualification on nuclear power plant equipment

International Nuclear Information System (INIS)

Fang Qingxian

1995-01-01

The standards and requirements for seismic qualification of nuclear power plant's component have been fully addressed, including the scope of seismic qualification, the approach and the method of common seismic qualification, the procedure of the seismic tests, and the criteria for the seismic qualification review. The problems discovered in the safety review and the solution for these problems and some other issues are also discussed

Labor Market Returns to Sub-Baccalaureate Credentials: How Much Does a Community College Degree or Certificate Pay?

Science.gov (United States)

Dadgar, Mina; Trimble, Madeline Joy

2015-01-01

This study provides one of the first estimates of the returns to different types of community college credentials--short-term certificates, long-term certificates, and associate degrees--across different fields of study. We exploit a rich data set that includes matched, longitudinal college transcripts and Unemployment Insurance records for…

Cognitive biases explain religious belief, paranormal belief, and belief in life's purpose.

Science.gov (United States)

Willard, Aiyana K; Norenzayan, Ara

2013-11-01

Cognitive theories of religion have postulated several cognitive biases that predispose human minds towards religious belief. However, to date, these hypotheses have not been tested simultaneously and in relation to each other, using an individual difference approach. We used a path model to assess the extent to which several interacting cognitive tendencies, namely mentalizing, mind body dualism, teleological thinking, and anthropomorphism, as well as cultural exposure to religion, predict belief in God, paranormal beliefs and belief in life's purpose. Our model, based on two independent samples (N=492 and N=920) found that the previously known relationship between mentalizing and belief is mediated by individual differences in dualism, and to a lesser extent by teleological thinking. Anthropomorphism was unrelated to religious belief, but was related to paranormal belief. Cultural exposure to religion (mostly Christianity) was negatively related to anthropomorphism, and was unrelated to any of the other cognitive tendencies. These patterns were robust for both men and women, and across at least two ethnic identifications. The data were most consistent with a path model suggesting that mentalizing comes first, which leads to dualism and teleology, which in turn lead to religious, paranormal, and life's-purpose beliefs. Alternative theoretical models were tested but did not find empirical support. Copyright © 2013 Elsevier B.V. All rights reserved.

Reaction Qualifications Revisited

DEFF Research Database (Denmark)

Lippert-Rasmussen, Kasper

2009-01-01

to a person's effectiveness by causing a favourable reaction in customers, co-workers etc. (for short: recipients) - are involved, this assumption is false. Building on work by Wertheimer, Mason, and Miller, this paper proposes an account of the reaction qualifications that count, from the point of view...... preferences, recipients should not respond to the applicant actually hired on the basis of their (the recipients') racial preferences. My account decomposes the meritocratic ideal into four separate norms, one of which applies to recipients rather than to selectors. Finally, it defends the view that reaction...... qualifications based on antimeritocratic reactions, while not unproblematic, are not entirely irrelevant from the point of view of merit. Notably, selectors need not discount them when no one - including the targets of the objectionable preferences - is unfairly disadvantaged. Because not all problematic...

QUALIFICATIONS FRAMEWORKS FOR LIFELONG LEARNING CONQUERING THE WORLD?

Directory of Open Access Journals (Sweden)

Arjen Deij

2014-01-01

Full Text Available The paper reveals the international prospects of developing and spreading the qualifications frameworks across the globe. It introduces the key terms and concepts related to the given issue, and examines both the benefits and challenges of qualifications frameworks implementation. The author looks into the origins and causes of the worldwide interest in qualifications framework application, and gives the overview of related recent publications and their conclusions to reinforce the provided argumentation.

Qualification of safety-related valve actuators

International Nuclear Information System (INIS)

Anon.

1981-01-01

This Standard describes the qualification of all types of power-driven valve actuators, including damper actuators, for safety-related functions in nuclear power generating stations. It may also be used to separately qualify actuator components. This Standard establishes the minimum requirements for, and guidance regarding, the methods and procedures for qualification of all safety-related functions of power-driven valve actuators

LTP fibre injector qualification and status

International Nuclear Information System (INIS)

Bogenstahl, J; Cunningham, L; Fitzsimons, E D; Hough, J; Killow, C J; Perreur-Lloyd, M; Robertson, D; Rowan, S; Ward, H

2009-01-01

This paper presents the current state of the LISA Technology Package (LTP) fibre injector qualification project in terms of vibration and shock tests. The fibre injector is a custom built part and therefore must undergo a full space qualification process. The mounting structure and method for sinusoidal vibration and random vibration tests as well as shock tests will be presented. Furthermore a proposal will be presented to use the fibre injector pair qualification model to build an optical prototype bench. The optical prototype bench is a full-scale model of the flight model. It will be used for development and rehearsal of all the assembly stages of the flight model and will provide an on-ground simulator for investigation as an updated engineering model.

Qualification of software and hardware

International Nuclear Information System (INIS)

Gossner, S.; Schueller, H.; Gloee, G.

1987-01-01

The qualification of on-line process control equipment is subdivided into three areas: 1) materials and structural elements; 2) on-line process-control components and devices; 3) electrical systems (reactor protection and confinement system). Microprocessor-aided process-control equipment are difficult to verify for failure-free function owing to the complexity of the functional structures of the hardware and to the variety of the software feasible for microprocessors. Hence, qualification will make great demands on the inspecting expert. (DG) [de

Background information for NDT qualification of Finnish disposal canisters of spent fuel

International Nuclear Information System (INIS)

Sarkimo, M.; Pitkaenen, J.

2013-12-01

This report presents a review to basic concepts, which are applied in the qualification of non-destructive testing (NDT) techniques. The qualification systems developed and used in some countries are briefly described in the beginning of the report. Anyway the report mainly discusses the qualification practices applied in the Finnish nuclear industry. The Finnish Radiation and Nuclear Safety Authority (STUK) in the YVL Guide 3.8 define the Finnish qualification approach applied for the in-service inspections. The principles presented in this document follow the views of the international organisations: Nuclear Regulator Working Group (NRWG) and European Network for Inspection and Qualification (ENIQ). For the practical qualification work a national guideline is established using so called SP-documents that include specific rules and instructions for execution of qualifications in accordance with YVL Guide 3.8 principles. Altogether the Finnish qualification system can be seen very well to follow the European (ENIQ) methodology. The report discusses several qualification terms and documents. Thus the normally necessary tasks and parts of a qualification are described. The qualification can be seen as a project that includes several tasks, which will be performed by different parties. Enough resources and time should be reserved for the planning and control of a qualification project to ensure its fluent progress. Some tasks are discussed in the report taking into account the situation in the qualification cases that are seen to be linked to the inspections of disposal canisters of spent fuel. (orig.)

Background information for NDT qualification of Finnish disposal canisters of spent fuel

Energy Technology Data Exchange (ETDEWEB)

Sarkimo, M. [VTT Technical Research Centre of Finland, Espoo (Finland); Pitkaenen, J.

2013-12-15

This report presents a review to basic concepts, which are applied in the qualification of non-destructive testing (NDT) techniques. The qualification systems developed and used in some countries are briefly described in the beginning of the report. Anyway the report mainly discusses the qualification practices applied in the Finnish nuclear industry. The Finnish Radiation and Nuclear Safety Authority (STUK) in the YVL Guide 3.8 define the Finnish qualification approach applied for the in-service inspections. The principles presented in this document follow the views of the international organisations: Nuclear Regulator Working Group (NRWG) and European Network for Inspection and Qualification (ENIQ). For the practical qualification work a national guideline is established using so called SP-documents that include specific rules and instructions for execution of qualifications in accordance with YVL Guide 3.8 principles. Altogether the Finnish qualification system can be seen very well to follow the European (ENIQ) methodology. The report discusses several qualification terms and documents. Thus the normally necessary tasks and parts of a qualification are described. The qualification can be seen as a project that includes several tasks, which will be performed by different parties. Enough resources and time should be reserved for the planning and control of a qualification project to ensure its fluent progress. Some tasks are discussed in the report taking into account the situation in the qualification cases that are seen to be linked to the inspections of disposal canisters of spent fuel. (orig.)

48 CFR 1437.7001 - Contractor qualification requirements.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Contractor qualification requirements. 1437.7001 Section 1437.7001 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR... Contractor qualification requirements. (a) Prior to award of a contract for real property appraisal services...

Europeans come together on qualification

International Nuclear Information System (INIS)

Whittle, J.

1996-01-01

Utilities operating nuclear power plants in Europe have formed the European Network for Inspection Qualification (ENIQ) to produce a common approach to demonstrating that non-destructive testing is capable providing the information to ensure the absence of significant defects in nuclear plants. Major developments over recent months have included the issue by ENIQ of a formal document defining the methodology for the conduct of qualification which sets out the principles that detailed systems, within an individual country context, should embody. A pilot study on pipe welds typical of those in BWR recirculation loops is being conducted to explore the issues involved in the practical application of the methodology. In parallel with ENIQ, the European Nuclear Regulators Working Group has set up a Task Force in an attempt to define a common regulatory position on non-destructive testing qualifications and has produced its own document which is wider in scope than that of ENIQ. (UK)

Strategy for Qualification of the Plutonium Immobilized Form

International Nuclear Information System (INIS)

Marra, J.C.; Marra, S.L.; Bibler, N.E.; Strachan, D.M.; Shaw, H.F.

1998-01-01

In order to dispose of a radioactive waste form in a federal high- level waste repository, a waste form qualification strategy and program must be developed. The waste form qualification program must include the acceptance specifications for the product, show how compliance with these specifications will be met, and then demonstrate compliance. An important element of this program is developing a measure to demonstrate product consistency. For the can- in-canister option, waste form qualification is needed not only for the Pu immobilized form but also for the high-level waste glass canister containing the Pu waste form. The latter will require close interaction and coordination with the U.S. Department of Energy - Office of Environmental Management (DOE-EM) who, through their contractor at the Savannah River Site (SRS), is the producer of the high-level waste form at the Defense Waste Processing Facility (DWPF). In this paper a waste form qualification strategy for the plutonium ceramic form is described that utilizes, as much as possible, the qualification strategy successfully used for vitrified high-level waste

49 CFR 214.349 - Training and qualification of watchmen/lookouts.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Training and qualification of watchmen/lookouts...) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY Roadway Worker Protection § 214.349 Training and qualification of watchmen/lookouts. (a) The training and qualification for...

SRS H1616 Hydride Transport Vessel Qualification Report

International Nuclear Information System (INIS)

Smith, A.C.

1999-01-01

This report serves as the design qualification basis for both transport and facility use. Headings identify report sections as containing qualification information for transport use, facility use, or both transport and facility use

SRS H1616 Hydride Transport Vessel Qualification Report

International Nuclear Information System (INIS)

Van Alstine, M.N.

1998-01-01

This report serves as the design qualification basis for both transport and facility use. Headings identify report sections as containing qualification information for transport use, facility use, or both transport and facility use

Credentialing and retention of visa trainees in post-graduate medical education programs in Canada.

Science.gov (United States)

Mathews, Maria; Kandar, Rima; Slade, Steve; Yi, Yanqing; Beardall, Sue; Bourgeault, Ivy; Buske, Lynda

2017-06-12

Visa trainees are international medical graduates (IMG) who come to Canada to train in a post-graduate medical education (PGME) program under a student or employment visa and are expected to return to their country of origin after training. We examined the credentialing and retention of visa trainees who entered PGME programs between 2005 and 2011. Using the Canadian Post-MD Education Registry's National IMG Database linked to Scott's Medical Database, we examined four outcomes: (1) passing the Medical Council of Canada Qualifying Examination Part 2 (MCCQE2), (2) obtaining a specialty designation (CCFP, FRCPC/SC), and (3) working in Canada after training and (4) in 2015. The National IMG Database is the most comprehensive source of information on IMG in Canada; data were provided by physician training and credentialing organizations. Scott's Medical Database provides data on physician locations in Canada. There were 233 visa trainees in the study; 39.5% passed the MCCQE2, 45.9% obtained a specialty designation, 24.0% worked in Canada after their training, and 53.6% worked in Canada in 2015. Family medicine trainees (OR = 8.33; 95% CI = 1.69-33.33) and residents (OR = 3.45; 95% CI = 1.96-6.25) were more likely than other specialist and fellow trainees, respectively, to pass the MCCQE2. Residents (OR = 7.69; 95% CI = 4.35-14.29) were more likely to obtain a specialty credential than fellows. Visa trainees eligible for a full license were more likely than those not eligible for a full license to work in Canada following training (OR = 3.41; 95% CI = 1.80-6.43) and in 2015 (OR = 3.34; 95% CI = 1.78-6.27). Visa training programs represent another route for IMG to qualify for and enter the physician workforce in Canada. The growth in the number of visa trainees and the high retention of these physicians warrant further consideration of the oversight and coordination of visa trainee programs in provincial and in pan

Integrated Information System for Higher Education Qualifications

Directory of Open Access Journals (Sweden)

Catalin Ionut SILVESTRU

2012-10-01

Full Text Available In the present article we aim to study thoroughly and detail aspects related to architectures specific for e-learning and management of human resources training interconnected to management of qualifications. In addition, we take into consideration combining e-learning architectures with software in an e-learning system interconnected with the National Registry of Qualifications of Higher Education, in view of developing and information system that correlates educational supply from higher education from Romania with labor market demands through qualifications. The scientific endeavor consists of original architectural solutions to integrate data, systems, processes, services from various sources and to use them in the proposed system. The practical result of the scientific endeavor is represented by design of architectures required for developing an e-learning system interconnected with the National Registry of Qualifications from Romania, which involve in first stage the qualifications provided by higher education. The proposed innovative solution consists in the fact that the proposed information system combines the advantages of content management system (CMS with learning content management system (LCMS and with reusable learning objects (RLO. Thus, the architecture proposed in the research ensures the integration of a content management system with a portal for information, guidance and support in making a professional project. The integration enables correlation of competences with content areas and specific items from various teaching subjects, thus evaluating the usefulness for this registry from learning/educational perspective. Using the proposed information system in enables correlation among qualifications, content of educational program and continuous self-evaluation opportunities, which facilitate monitoring of progress and adjustment of learning content.

Integration of Bilingual Emphasis Program into University Curriculum. Multiple Subjects Credential Program: Hupa, Yurok, Karuk, or Tolowa Emphasis.

Science.gov (United States)

Bennett, Ruth

A description of the American Indian Bilingual Teacher Credential Program offered by Humboldt State University (California) provides background information on the linguistic groups served by the program. Accompanying the program descriptions are lists of lower and upper division requirements, descriptions of competency exam, program schedule,…

Developing competence based qualification system in the nuclear energy sector

International Nuclear Information System (INIS)

Ceclan, Mihail

2016-01-01

The Institute for Energy and Transport of the Joint Research Centre, European Commission, developed a strategy and road map for ECVET implementation. The JRC road map for European Credit System for Vocational Education and Training (ECVET) implementation has reached the stage of Competence-Based Qualification System development. The Competence-Based Qualification System can help bridge the gap between Human Resources demand and supply in the nuclear market by structuring qualifications in small independent parts. This very specific ECVET feature of a qualification, facilitates the process of competences accumulation and the lifelong learning, mobility and flexible learning pathways. New developments are presented about the Competence-Based Qualification System development for the nuclear energy sector.

Developing competence based qualification system in the nuclear energy sector

Energy Technology Data Exchange (ETDEWEB)

Ceclan, Mihail [European Commission, Petten (Netherlands). Inst. for Energy and Transport

2016-04-15

The Institute for Energy and Transport of the Joint Research Centre, European Commission, developed a strategy and road map for ECVET implementation. The JRC road map for European Credit System for Vocational Education and Training (ECVET) implementation has reached the stage of Competence-Based Qualification System development. The Competence-Based Qualification System can help bridge the gap between Human Resources demand and supply in the nuclear market by structuring qualifications in small independent parts. This very specific ECVET feature of a qualification, facilitates the process of competences accumulation and the lifelong learning, mobility and flexible learning pathways. New developments are presented about the Competence-Based Qualification System development for the nuclear energy sector.

A system for personnel qualification of non-destructive testing procedures from testing and and qualification system in Sweden

International Nuclear Information System (INIS)

Kuna, M.; Kubis, S.; Plasek, J.

1999-01-01

The method for qualification of non-destructive testing personnel carrying out inspections by means of ultrasonic and eddy-current tests to inspect cladding in BWR reactor pressure vessel and core shroud lid. Development of procedures tests with real artificial cracks, blind tests. Evaluation of results by the Swedish Qualification Commission. Performance of the tests at Oskarshamn-1

Radiological Control Technician: Standardized technician Qualification Standard

International Nuclear Information System (INIS)

1992-10-01

The Qualification Standard states and defines the knowledge and skill requirements necessary for successful completion of the Radiological Control Technician Training Program. The standard is divided into three phases: Phase I concerns RCT Academic training. There are 13 lessons associated with the core academics program and 19 lessons associated with the site academics program. The staff member should sign the appropriate blocks upon successful completion of the examination for that lesson or group of lessons. In addition, facility specific lesson plans may be added to meet the knowledge requirements in the Job Performance Measures (JPM) of the practical program. Phase II concerns RCT core/site practical (JPMs) training. There are thirteen generic tasks associated with the core practical program. Both the trainer/evaluator and student should sign the appropriate block upon successful completion of the JPM. In addition, facility specific tasks may be added or generic tasks deleted based on the results of the facility job evaluation. Phase III concerns the oral examination board successful completion of the oral examination board is documented by the signature of the chairperson of the board. Upon completion of all of the standardized technician qualification requirements, final qualification is verified by the student and the manager of the Radiological Control Department and acknowledged by signatures on the qualification standard. The completed Qualification Standard shall be maintained as an official training record

10 CFR 50.76 - Licensee's change of status; financial qualifications.

Science.gov (United States)

2010-01-01

... the financial qualifications information that would be required for obtaining an initial operating license as specified in § 50.33(f)(2). The financial qualifications information must address the first... 10 Energy 1 2010-01-01 2010-01-01 false Licensee's change of status; financial qualifications. 50...

Test report: Electron-proton spectrometer qualification test unit, qualification test

Science.gov (United States)

Vincent, D. L.

1972-01-01

Qualification tests of the electron-proton spectrometer test unit are presented. The tests conducted were: (1) functional, (2) thermal/vacuum, (3) electromagnetic interference, (4) acoustic, (5) shock, (6) vibration, and (7) humidity. Results of each type of test are presented in the form of data sheets.

Program plan for environmental qualification of mechanical and dynamic (including seismic) qualification of mechanical and electrical equipment program (EDQP)

International Nuclear Information System (INIS)

Weidenhamer, G.H.

1986-06-01

The equipment qualification program described in this plan is intended to provide the technical basis for resolving uncertainties in existing equipment qualification standards. In addition, research results are contributing to the resolution of safety issues GI-23, GI-87, USI-A44, titled, ''Reactor Coolant Pump Seal Failure,'' ''Failure of HPCI Steam Line Without Isolation,'' and ''Station Blackout,'' respectively. Also, research effort is being directed at providing information on the behavior of containment isolation valves under severe accident environments. Although the results of the latter research will not contribute to resolving uncertainties in qualification standards, it has proven cost effective to obtain this information under this program

The ABC of ABC : An analysis of attribute-based credentials in the light of data protection, privacy and identity.

NARCIS (Netherlands)

Korenhof, P.E.I.; Koning, Merel; Alpár, Gergely; Hoepman, J.H.; Padullés, Joan Balcells; i Martínez, Agustí Cerrillo; Poch, Miquel Peguera; López, Ismael Peña; de Moner, María José Pifarré; Solana, Mònica Vilasau

2014-01-01

Our networked society increasingly needs secure identity sys- tems. The Attribute-based credential (ABC) technology is designed to be privacy-friendlier than contemporary authentication methods, which often suffer from information leakage. So far, however, some of the wider implications of ABC have

AGR-1 Data Qualification Interim Report

International Nuclear Information System (INIS)

Abbott, Machael

2009-01-01

Projects for the very-high-temperature reactor (VHTR) program provide data in support of Nuclear Regulatory Commission licensing of the VHTR. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high temperature and high fluence environments. The VHTR Program has established the NGNP Data Management and Analysis System (NDMAS) to ensure that VHTR data are (1) qualified for use, (2) stored in a readily accessible electronic form, and (3) analyzed to extract useful results. This document focuses on the first NDMAS objective. It describes the data streams associated with the first Advanced Gas Reactor (AGR-1) experiment, the processing of these data within NDMAS, and reports the interim FY09 qualification status of the AGR-1 data to date. Data qualification activities within NDMAS for specific types of data are determined by the data qualification category, which is assigned by the data generator, and include: (1) capture testing, to confirm that the data stored within NDMAS are identical to the raw data supplied, (2) accuracy testing, to confirm that the data are an accurate representation of the system or object being measured, and (3) documentation that the data were collected under an NQA-1 or equivalent QA program. The interim qualification status of the following four data streams is reported in this document: (1) fuel fabrication data, (2) fuel irradiation data, (3) fission product monitoring system (FPMS) data, and (4) Advanced Test Reactor (ATR) operating conditions data. A final report giving the NDMAS qualification status of all AGR-1 data (including cycle 145A) is planned for February 2010

Authentication in insecure environments using visual cryptography and non-transferable credentials in practise

CERN Document Server

Pape, Sebastian

2014-01-01

Sebastian Pape discusses two different scenarios for authentication. On the one hand, users cannot trust their devices and nevertheless want to be able to do secure authentication. On the other hand, users may not want to be tracked while their service provider does not want them to share their credentials. Many users may not be able to determine whether their device is trustworthy, i.e. it might contain malware. One solution is to use visual cryptography for authentication. The author generalizes this concept to human decipherable encryption schemes and establishes a relationship to CAPTCHAS.

T25 Qualification of old containers

International Nuclear Information System (INIS)

Hoerning, T.; Kasparek, E.M.; Voelzke, H.

2013-01-01

Radioactive waste for final disposal in the repository Konrad has to be packaged in licensed containers. The qualification of containers is performed according the respective standards and BfS requirements. The latter ones differ for different container types with respect to accident resistance based on the release behavior of the waste. Usually qualification of container types is performed before series production. The qualification of already produced containers (''old containers'') is significantly more complicated. The differences of quality assurance and materials properties of the older containers have to be evaluated. A main tool for this evaluation is the numerical re-calculation of accident scenarios for estimation of the safety margins. The validation of appropriate finite element models is available. Based on these date it might be possible to abandon additional drop tests with the existing old containers to prove the structural integrity.

Inspection procedure and essential parameters in NDT qualification

International Nuclear Information System (INIS)

Sarkimo, M.

2000-06-01

The objective of the inspection qualification is to ensure that applied non-destructive methods (NDT) have the required performance. The approach of the qualification process is systematic and carefully documented and therefore some new requirements can be seen concerning the composition of the documentation. There are also new document types, that only application of the inspection qualification requires. The most important of these is the technical justification, that includes the documented evidences concerning the performance of the inspection system. This publication includes two reports: 'Compilation of the inspection procedure' and 'Essential/influential parameters in NDT qualification'. The former of these discusses the issues to be considered in an inspection procedure especially from the point of view of the mechanised ultrasonic testing. The later report explains the parameters formulated to analyse in the technical justification all aspects of the inspection application. (orig.)

Health Manpower Credentialing: Legal Implications of Institutional Licensure. Health Manpower Policy Discussion Paper Series No.: C3.

Science.gov (United States)

Crane, Stephen

The objective of this analysis is to outline in broad fashion the current trends and issues in the licensure of health manpower and to contrast two proposed alternative systems of credentialing that focus on licensure of health care institutions instead of individual health care providers. The argument of the analysis is that the current system of…

Similarity principles for seismic qualification of equipment by experience data

International Nuclear Information System (INIS)

Kana, D.D.; Pomerening, D.J.

1989-01-01

A methodology is developed for seismic qualification of nuclear plant equipment by applying similarity principles to existing experience data. Experience data is that available from previous qualifications by analysis or testing, or from actual earthquake events. Similarity principles are defined in terms of excitation, equipment physical characteristics, and equipment response. Physical similarity is further defined in terms of a critical transfer function for response at a location on a primary structure, whose response can be assumed directly related to fragility of the item under elevated levels of excitation. Procedures are developed for combining experience data into composite specifications for qualification of equipment that can be shown to be physically similar to the reference equipment. Other procedures are developed for extending qualifications beyond the original specifications under certain conditions. Some examples for application and verification of the procedures are given for actual test data available from previous qualifications. The developments are intended to elaborate on the rather broad guidelines by the IEEE 344 Standards Committee for equipment qualification in new nuclear plants. The results also contribute to filling a gap that exists between the IEEE 344 methodology and that which was previously developed for equipment in existing plants by the Seismic Qualification Utilities Group. 10 refs., 9 figs., 1 tab

Stayers, Leavers, Lovers, and Dreamers: Why People Teach and Why They Stay. 2004 Barbara Biber Lecture. Occasional Paper Series 16

Science.gov (United States)

Cochran-Smith, Marilyn

2006-01-01

Teacher shortages, like the one schools face today, are not new. Periodically over the last 50 years there were fewer teachers available than were needed, and the response was primarily to step up recruitment efforts and issue temporary teaching credentials to those without qualifications. Three things are new however: (1) The requirement that…

Qualification Practices in Nuclear Industry: Steam Generator Eddy Current Probe Qualification

International Nuclear Information System (INIS)

Vavrous, M.; Gracin, R.

2010-01-01

Through history of nuclear power plant operation, a large number of nuclear power plant forced outages related to tube failures occurred. It resulted with large amount of repair and outage costs, what initiated implementation of regulated practice of periodical tube examination and tube condition monitoring. Purpose of examinations is to detect existing or potential tube degradations that could affect tube integrity and therefore result in forced outages and unwanted costs related to emergency repair activities and loss of ability for electrical power production. With increased examination activities, additional information about steam generator tube condition became available and additional methods for ensuring tube integrity became available. As the number of examination solutions increased, need for validation and assessment of examination methods occurred. For that purpose, a large number of standards and guidelines with its requirements were implemented in nuclear industry regulatory requirements to ensure that adequately validated examinations are applied. With this purpose, qualification requirements for inspection activities were implemented with other requirements. With progress of technology, progress was also achieved in examination methods and more advanced examination methods and advanced inspection systems were developed. This advancement is accompanied by advancement in regulatory requirements regarding inspection and monitoring of tube integrity and condition. Ultimate goal of implementation of qualification processes and its requirements in all aspects of nuclear industry is to achieve minimal rate of forced outages, which would ensure maximum electrical power production capabilities and maximum optimization of operational costs while maintaining safe operation in accordance with environmental policies. This article will focus on qualification of steam generator eddy current bobbin probe.(author).

Transnational Geographies of Academic Distinction: The Role of Social Capital in the Recognition and Evaluation of "Overseas" Credentials

Science.gov (United States)

Waters, Johanna L.

2009-01-01

This paper examines the role of specific and place-based social capital in the recognition and evaluation of international credentials. Whilst research on labour market segmentation has contributed towards an understanding of the spatial variability of the value of human capital, very little attention has been paid to the ways in which the…

49 CFR 391.11 - General qualifications of drivers.

Science.gov (United States)

2010-10-01

... understand highway traffic signs and signals in the English language, to respond to official inquiries, and... QUALIFICATIONS OF DRIVERS AND LONGER COMBINATION VEHICLE (LCV) DRIVER INSTRUCTORS Qualification and... motor vehicle unless he/she is qualified to drive a commercial motor vehicle. Except as provided in...

29 CFR 1926.1076 - Qualifications of dive team.

Science.gov (United States)

2010-07-01

... 29 Labor 8 2010-07-01 2010-07-01 false Qualifications of dive team. 1926.1076 Section 1926.1076 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... § 1926.1076 Qualifications of dive team. Note: The requirements applicable to construction work under...

Review of qualifications for fuel assembly fabrication

International Nuclear Information System (INIS)

Slabu, Dan; Zemek, Martin; Hellwig, Christian

2013-01-01

The required quality of nuclear fuel in industrial production can only be assured by applying processes in fabrication and inspection, which are well mastered and have been proven by an appropriate qualification. The present contribution shows the understanding and experiences of Axpo with respect to qualifications in the frame of nuclear fuel manufacturing and reflects some related expectations of the operator. (orig.)

Qualification tests for PWR control element drive mechanism

Energy Technology Data Exchange (ETDEWEB)

Kim, In Yong; Jin, Choon Eon; Choi Suhn [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1996-01-01

It is necessary to perform the qualification test for the magnetic jack type CEDM to show the design compatibility because the CEDM is composed of many mechanical and electrical components complicatedly. ABB-CE performed various qualification tests during the development of the System80 CEDM to which Korea Standard Nuclear Plant (KSNP) CEDM referred. The qualification test for the CEDM is classified into the performance test and the dynamic test. The performance test is to verify operability of the CEDM, and the dynamic test is to find dynamic characteristics and to verify the structural integrity if the CEDM for the seismic accidents. Described in this report are the test requirements, the test facilities and the test methods for the performance and the dynamic qualification tests of the PWR magnetic jack type CEDM. The impacts of the design changes in the Korea Next Generation Reactor (KNGR) on the KSNP CEDM were analyzed to present the necessity for the tests. This report also proposes the facilities to perform the tests in KAERI including reasonable schedule for the tests. Attached to this report is the summary of qualification tests of System 80 CEDM performed by ABB-CE. 20 figs., 16 tabs., 21 refs. (Author) .new.

Qualification tests for PWR control element drive mechanism

International Nuclear Information System (INIS)

Kim, In Yong; Jin, Choon Eon; Choi Suhn

1996-01-01

It is necessary to perform the qualification test for the magnetic jack type CEDM to show the design compatibility because the CEDM is composed of many mechanical and electrical components complicatedly. ABB-CE performed various qualification tests during the development of the System80 CEDM to which Korea Standard Nuclear Plant (KSNP) CEDM referred. The qualification test for the CEDM is classified into the performance test and the dynamic test. The performance test is to verify operability of the CEDM, and the dynamic test is to find dynamic characteristics and to verify the structural integrity if the CEDM for the seismic accidents. Described in this report are the test requirements, the test facilities and the test methods for the performance and the dynamic qualification tests of the PWR magnetic jack type CEDM. The impacts of the design changes in the Korea Next Generation Reactor (KNGR) on the KSNP CEDM were analyzed to present the necessity for the tests. This report also proposes the facilities to perform the tests in KAERI including reasonable schedule for the tests. Attached to this report is the summary of qualification tests of System 80 CEDM performed by ABB-CE. 20 figs., 16 tabs., 21 refs. (Author) .new

Re-qualification of switchgear equipment following field modification

International Nuclear Information System (INIS)

Tulk, J.D.; El Bestawi, M.A.

1984-01-01

A set of 4.16 kV switchgear was seismically qualified by shaker table test for use in a nuclear power plant. Later, the equipment was modified by the addition of two extra switches and enclosures. This paper describes the methods used to extend the qualification achieved in the original proof test to the new configuration. Qualification of the modified switchgear depended on demonstrating that the intensity of the shaking that would be experienced by equipment mounted in the extended enclosure during a design basis earthquake (DBE) would be no stronger than the shaking that occurred during the original qualification testing. This was accomplished by a combination of analysis and experiment. Natural frequencies and mode-shapes of the original and extended enclosure structures were determined through in-situ modal tests on the equipment. Mathematical models based on the experimental results were then used for dynamic analyses which generated two sets of in-equipment response spectra: one set representing the original qualification test; and one set representing the response of the modified equipment to a hypothetical DBE. Qualification was confirmed by demonstrating that the test-based response spectra for the original configuration exceeded the response spectra developed for the extended structure subjected to DBE level excitation

Open-Source RTOS Space Qualification: An RTEMS Case Study

Science.gov (United States)

Zemerick, Scott

2017-01-01

NASA space-qualification of reusable off-the-shelf real-time operating systems (RTOSs) remains elusive due to several factors notably (1) The diverse nature of RTOSs utilized across NASA, (2) No single NASA space-qualification criteria, lack of verification and validation (V&V) analysis, or test beds, and (3) different RTOS heritages, specifically open-source RTOSs and closed vendor-provided RTOSs. As a leader in simulation test beds, the NASA IV&V Program is poised to help jump-start and lead the space-qualification effort of the open source Real-Time Executive for Multiprocessor Systems (RTEMS) RTOS. RTEMS, as a case-study, can be utilized as an example of how to qualify all RTOSs, particularly the reusable non-commercial (open-source) ones that are gaining usage and popularity across NASA. Qualification will improve the overall safety and mission assurance of RTOSs for NASA-agency wide usage. NASA's involvement in space-qualification of an open-source RTOS such as RTEMS will drive the RTOS industry toward a more qualified and mature open-source RTOS product.

14 CFR 135.247 - Pilot qualifications: Recent experience.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Pilot qualifications: Recent experience... Flight Crewmember Requirements § 135.247 Pilot qualifications: Recent experience. (a) No certificate holder may use any person, nor may any person serve, as pilot in command of an aircraft carrying...

49 CFR 214.343 - Training and qualification, general.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Training and qualification, general. 214.343... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY Roadway Worker Protection § 214.343 Training and qualification, general. (a) No employer shall assign an employee to perform the duties of a...

27 CFR 19.823 - Changes after original qualification.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Changes after original... Vaporizing Process Qualification Documents § 19.823 Changes after original qualification. When there is a change in the information recorded in the original approved application, the proprietor shall make a...

Selection of equipment for equipment qualification

International Nuclear Information System (INIS)

Torr, K.G.

1989-01-01

This report describes the methodology applied in selecting equipment in the special safety systems for equipment qualification in the CANDU 600 MW nuclear generating stations at Gentilly 2 and Point Lepreau. Included is an explanation of the selection procedure adopted and the rationale behind the criteria used in identifying the equipment. The equipment items on the list have been grouped into three priority categories as a planning aid to AECB staff for a review of the qualification status of the special safety systems

An investigation of individual functionality football referees qualifications

Directory of Open Access Journals (Sweden)

S.M. Berezka

2014-12-01

Full Text Available Purpose: determine the level of individual functionality referees qualifications. Objective of the study was to determine the physiological parameters characterizing the functionality of football referees qualifications. Material : mainly experiment involved 29 highly qualified referees aged 21-45 years. In the main experiment participated 29 referees and 40 assistant referees (n = 69 Ukrainian Premier League. Results: found that the means and methods that use Ukrainian football referee high qualification in the special physical training for a competition, are not effective enough. Consequence of poorly planned training process is to increase the number of wrong decisions of the referees during the match associated with poor motor activity. Conclusions: data obtained in the course of educational research confirmed our theory about the necessity of individualization process special physical training qualifications of referees, which would entail increasing the functional and motor abilities of the referees, and as a consequence of better and successful completion of the work.

Buried Waste Program (BWP) data qualification manual

International Nuclear Information System (INIS)

Casey, C.; Larson, R.A.; Harris, G.A.

1989-06-01

The Data Qualification Manual (DQM) has been developed to discuss the process required to qualify data generated for the Buried Waste Program (BWP). The data from the BWP tasks conducted at the Radioactive Waste Management Complex (RWMC) and elsewhere will lead to remedial decisions being made which are governed by federal regulations administered by the Environmental Protection Agency (EPA). Data qualification is the process of insuring that only data of planned and known qualities are used to make a decision or answer a question. Although it is the Data Integrity Review Committee's (DIRC) responsibility to insure that the quality of all BWP data is ultimately verified and validated, all personnel who participate in the data gathering process will affect the quality of the data and must be responsible for knowing what is required to produce data of the planned quality. Therefore this manual is addressed to all participants in a data-gathering task. This manual discusses requirements to support data qualification in several areas, including: the sampling and analysis plan; data quality objectives and PARCC goals; sample custody documentation; quality assurance; assembly of the data qualification package; and existing data. 23 refs., 4 figs., 6 tabs

AGR-1 Data Qualification Report

International Nuclear Information System (INIS)

Abbott, Michael

2010-01-01

Projects for the very high temperature reactor (VHTR) Technology Development Office (TDO) program provide data in support of Nuclear Regulatory Commission licensing of the VHTR. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high temperature and high fluence environments. The VHTR program has established the NGNP Data Management and Analysis System (NDMAS) to ensure that VHTR data are (1) qualified for use, (2) stored in a readily accessible electronic form, and (3) analyzed to extract useful results. This document focuses on the first NDMAS objective. It describes the data streams associated with the first Advanced Gas Reactor experiment (AGR-1), the processing of these data within NDMAS, and reports the qualification status of the data. Data qualification activities within NDMAS for specific types of data are determined by the data qualification category assigned by the data generator. They include: (1) capture testing, to confirm that the data stored within NDMAS are identical to the raw data supplied, (2) accuracy testing, to confirm that the data are an accurate representation of the system or object being measured, and (3) documentation that the data were collected under an NQA-1 or equivalent quality assurance program. The NDMAS database processing and qualification status of the following five data streams is reported in this document: (1) Fuel fabrication data. All data have been processed into the NDMAS database and qualified (1,819 records). (2) Fuel irradiation data. Data from all 13 AGR-1 reactor cycles have been processed into the NDMAS database and tested. Of these, 85% have been qualified and 15% have failed NDMAS accuracy testing. (3) FPMS data. Reprocessed (January 2010) data from all 13 AGR-1 reactor cycles have been processed into the database and capture tested. Final qualification of these data will be recorded after QA approval of an Engineering Calculations and Analysis Report currently

Ontological confusions but not mentalizing abilities predict religious belief, paranormal belief, and belief in supernatural purpose.

Science.gov (United States)

Lindeman, Marjaana; Svedholm-Häkkinen, Annika M; Lipsanen, Jari

2015-01-01

The current research tested the hypothesis that the abilities for understanding other people's minds give rise to the cognitive biases that underlie supernatural beliefs. We used structural equation modeling (N=2789) to determine the roles of various mentalizing tendencies, namely self-reported affective and cognitive empathy (i.e., mind reading), actual cognitive and affective empathic abilities, hyper-empathizing, and two cognitive biases (core ontological confusions and promiscuous teleology) in giving rise to supernatural beliefs. Support for a path from mentalizing abilities through cognitive biases to supernatural beliefs was weak. The relationships of mentalizing abilities with supernatural beliefs were also weak, and these relationships were not substantially mediated by cognitive biases. Core ontological confusions emerged as the best predictor, while promiscuous teleology predicted only a small proportion of variance. The results were similar for religious beliefs, paranormal beliefs, and for belief in supernatural purpose. Copyright © 2014 Elsevier B.V. All rights reserved.

Guidelines for the training, credentialing, use, and supervision of speech-language pathology assistants. Task Force on Support Personnel.

Science.gov (United States)

1996-01-01

These guidelines are an official statement of the American Speech-Language-Hearing Association. They provide guidance on the training, credentialing, use, and supervision of one category of support personnel in speech-language pathology: speech-language pathology assistants. Guidelines are not official standards of the Association. They were developed by the Task Force on Support Personnel: Dennis J. Arnst, Kenneth D. Barker, Ann Olsen Bird, Sheila Bridges, Linda S. DeYoung, Katherine Formichella, Nena M. Germany, Gilbert C. Hanke, Ann M. Horton, DeAnne M. Owre, Sidney L. Ramsey, Cathy A. Runnels, Brenda Terrell, Gerry W. Werven, Denise West, Patricia A. Mercaitis (consultant), Lisa C. O'Connor (consultant), Frederick T. Spahr (coordinator), Diane Paul-Brown (associate coordinator), Ann L. Carey (Executive Board liaison). The 1994 guidelines supersede the 1981 guidelines entitled, "Guidelines for the Employment and Utilization of Supportive Personnel" (Asha, March 1981, 165-169). Refer to the 1995 position statement on the "Training, Credentialing, Use, and Supervision of Support Personnel in Speech-Language Pathology" (Asha, 37 [Suppl. 14], 21).

Qualification standard for photovoltaic concentrator modules

Energy Technology Data Exchange (ETDEWEB)

McConnell, R.; Kurtz, S.; Bottenberg, W. R.; Hammond, R.; Jochums, S. W.; McDanal, A. J.; Roubideaux, D.; Whitaker, C.; Wohlgemuth, J.

2000-05-05

The paper describes a proposed qualification standard for photovoltaic concentrator modules. The standard's purpose is to provide stress tests and procedures to identify any component weakness in photovoltaic concentrator modules intended for power generation applications. If no weaknesses are identified during qualification, both the manufacturer and the customer can expect a more reliable product. The qualification test program for the standard includes thermal cycles, humidity-freeze cycles, water spray, off-axis beam damage, hail impact, hot-spot endurance, as well as electrical tests for performance, ground continuity, isolation, wet insulation resistance, and bypass diodes. Because concentrator module performance can not be verified using solar simulator and reference cell procedures suitable for flat-plate modules, the standard specifies an outdoor I-V test analysis allowing a performance comparison before and after a test procedure. Two options to this complex analysis are the use of a reference concentrator module for side-by-side outdoor comparison with modules undergoing various tests and a dark I-V performance check.

14 CFR 121.437 - Pilot qualification: Certificates required.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Pilot qualification: Certificates required... Pilot qualification: Certificates required. (a) No pilot may act as pilot in command of an aircraft (or... pilots) unless he holds an airline transport pilot certificate and an appropriate type rating for that...

14 CFR 125.285 - Pilot qualifications: Recent experience.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Pilot qualifications: Recent experience... Requirements § 125.285 Pilot qualifications: Recent experience. (a) No certificate holder may use any person, nor may any person serve, as a required pilot flight crewmember unless within the preceding 90...

Qualification Users' Perceptions and Experiences of Assessment Reliability

Science.gov (United States)

Chamberlain, Suzanne

2013-01-01

This paper presents the findings of a study designed to explore qualification users' perceptions and experiences of reliability in the context of national assessment outcomes in England. The study consisted of 17 focus groups conducted across six sectors of qualification users: students, teachers, trainee teachers, job-seekers, employers and…

Revision of the qualification framework at the Technical University of Denmark Part 2

DEFF Research Database (Denmark)

Henneberg, Kaj-Åge; Kuhn, Luise Theil; Jungersen, Gregers

2017-01-01

Using a revised Qualification Framework (QF) with four main categories: -to know, - to be, -to interact, and -to do, this paper demonstrates how to use the elements of the QF to construct Programme-Qualification Matrices. A general Programme- Qualification Matrix defines the qualifications and th...

Questions of qualification exam for non-destructive testing and materials science - the first level

International Nuclear Information System (INIS)

Shaaban, H.I.; Addarwish, J.M.A.

2013-01-01

The book contains seven chapters: Questions of qualification for magnetic particles testing method - Questions of qualification for liquids penetrant testing method - Questions of qualification for the visual inspection testing method - Questions of qualification for the ultrasonic testing method - Questions of qualification for the eddy current testing method - Questions of rehabilitation for industrial radiographic testing method - Qualification questions about materials science and manufacturing defects of castings and welding and comparison between non-destructive testing methods.

Seismic qualification of existing nuclear installations in India - a proposal

International Nuclear Information System (INIS)

Basu, P.C.

2001-01-01

In India, the work toward seismic qualification of existing nuclear facilities has been started. Preliminary work is being undertaken with respect to identifying the facilities which would be taken up for seismic qualification, approach and methodology for re-evaluation for seismic safety, acceptance criteria, etc. Work has also been started for framing up the criteria and methodology of the seismic qualification of these facilities. Present paper contains the proposal in this respect. This proposal is on similar lines of the present practice of seismic qualification of NPP, as summarized in the Appendix, but has been modified to suit the special requirements of Indian nuclear installations. (author)

14 CFR 121.439 - Pilot qualification: Recent experience.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Pilot qualification: Recent experience. 121... Pilot qualification: Recent experience. (a) No certificate holder may use any person nor may any person serve as a required pilot flight crewmember, unless within the preceding 90 days, that person has made...

30 CFR 75.155 - Qualified hoisting engineer; qualifications.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Qualified hoisting engineer; qualifications. 75... Persons § 75.155 Qualified hoisting engineer; qualifications. (a)(1) A person is a qualified hoisting engineer within the provisions of subpart O of this part, for the purpose of operating a steam-driven hoist...

32 CFR 935.139 - Motor vehicle operator qualifications.

Science.gov (United States)

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Motor vehicle operator qualifications. 935.139... AND INSULAR REGULATIONS WAKE ISLAND CODE Motor Vehicle Code § 935.139 Motor vehicle operator qualifications. (a) No person may operate a privately owned motor vehicle on Wake Island unless he has an island...

Global Trend In The Qualifications Of Medical Educators | Issa ...

African Journals Online (AJOL)

NPMCN) or its equivalents is the highest educational and professional qualification of clinical Medical Educators in Nigeria while PhD is the acceptable highest qualification for their basic medical sciences counterparts. This had been the status ...

The Relationship among Pre-Service EFL Teachers' Beliefs about Language Learning, Pedagogical Beliefs, and Beliefs about ICT Integration

Science.gov (United States)

Inayati, Dian; Emaliana, Ive

2017-01-01

This paper elucidates the relationship among pre-service teachers' beliefs about language learning, pedagogical beliefs, and beliefs about ICT Integration through survey methodology. This study employed a quantitative approach, particularly a correlational relationship to investigate the relationships among beliefs about language learning,…

Assessing mathematics within advanced school science qualifications

OpenAIRE

McAlinden, Mary; Noyes, Andrew

2017-01-01

Following sustained discussion regarding the relationship between advanced mathematics and science learning in England, the government has pursued a reform agenda in which mathematics is embedded in national, high stakes A-level science qualifications and their assessments for 18-year-olds. For example, A-level Chemistry must incorporate the assessment of relevant mathematics for at least 20% of the qualification. Other sciences have different mandated percentages. This embedding policy is ru...

SRNL PHASE 1 Assessment Of The WTP Waste Qualification Program

International Nuclear Information System (INIS)

Peeler, D.; Hansen, E.; Herman, C.; Marra, S.; Wilmarth, B.

2012-01-01

The Hanford Tank Waste Treatment and Immobilization Plant (WTP) Project is currently transitioning its emphasis from an engineering design and construction phase toward facility completion, start-up and commissioning. With this transition, the WTP Project has initiated more detailed assessments of the requirements that must be met during the actual processing of the Hanford Site tank waste. One particular area of interest is the waste qualification program. In general, the waste qualification program involves testing and analysis to demonstrate compliance with waste acceptance criteria, determine waste processability, and demonstrate laboratory-scale unit operations to support WTP operations. The testing and analysis are driven by data quality objectives (DQO) requirements necessary for meeting waste acceptance criteria for transfer of high-level wastes from the tank farms to the WTP, and for ensuring waste processability including proper glass formulations during processing within the WTP complex. Given the successful implementation of similar waste qualification efforts at the Savannah River Site (SRS) which were based on critical technical support and guidance from the Savannah River National Laboratory (SRNL), WTP requested subject matter experts (SMEs) from SRNL to support a technology exchange with respect to waste qualification programs in which a critical review of the WTP program could be initiated and lessons learned could be shared. The technology exchange was held on July 18-20, 2011 in Richland, Washington, and was the initial step in a multi-phased approach to support development and implementation of a successful waste qualification program at the WTP. The 3-day workshop was hosted by WTP with representatives from the Tank Operations Contractor (TOC) and SRNL in attendance as well as representatives from the US DOE Office of River Protection (ORP) and the Defense Nuclear Facility Safety Board (DNFSB) Site Representative office. The purpose of the

Suppressed Belief

Directory of Open Access Journals (Sweden)

Komarine Romdenh-Romluc

2009-12-01

Full Text Available Moran’s revised conception of conscious belief requires us to reconceptualise suppressed belief. The work of Merleau-Ponty offers a way to do this. His account of motor-skills allows us to understand suppressed beliefs as pre-reflective ways of dealing with the world.

29 CFR 1910.410 - Qualifications of dive team.

Science.gov (United States)

2010-07-01

... 29 Labor 5 2010-07-01 2010-07-01 false Qualifications of dive team. 1910.410 Section 1910.410... Requirements § 1910.410 Qualifications of dive team. (a) General. (1) Each dive team member shall have the experience or training necessary to perform assigned tasks in a safe and healthful manner. (2) Each dive team...

AGR-2 Data Qualification Interim Report

International Nuclear Information System (INIS)

Abbott, Michael L.

2010-01-01

Projects for the very high temperature reactor (VHTR) Technology Development Office program provide data in support of Nuclear Regulatory Commission licensing of the VHTR. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high temperature and high fluence environments. The VHTR program established the NGNP Data Management and Analysis System (NDMAS) to manage and document VHTR data qualification, for storage of the data in a readily accessible electronic form, and to assist in the analysis and presentation of the data. This document gives the status of NDMAS processing and qualification of data associated with the initial reactor cycle (147A) of the second Advanced Gas Reactor (AGR-2) experiment which began on June 21, 2010. Because it is early in the AGR-2 experiment, data from only two AGR-2 data streams are reported on: Fuel Fabrication and Fuel Irradiation data. As of August 1, 2010, approximately 311,000 irradiation data records have been stored in NDMAS, and qualification tests are in progress. Preliminary information indicates that TC 2 in Capsule 2 failed prior to start of the experiment, and NDMAS testing has thus far identified only two invalid data values from the METSO data collection system Data from the Fission Product Monitoring System (FPMS) are not currently processed until after reactor cycle shutdown and have not yet been received. A description of the ATR operating conditions data associated with the AGR-2 experiment (e.g., power levels) are summarized in the AGR-1 data qualification report (INL/EXT-09-16460). Since ATR data are collected under ATR program data quality requirements (i.e., outside the VHTR program), the NGNP program and NDMAS do not take additional actions to qualify these data other than NDMAS capture testing. Data qualification of graphite characterization data collected under the Graphite Technology Development Project is reported in a separate status report (Hull 2010).

AGR-2 Data Qualification Interim Report

Energy Technology Data Exchange (ETDEWEB)

Michael L. Abbott

2010-09-01

Projects for the very high temperature reactor (VHTR) Technology Development Office program provide data in support of Nuclear Regulatory Commission licensing of the VHTR. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high temperature and high fluence environments. The VHTR program established the NGNP Data Management and Analysis System (NDMAS) to manage and document VHTR data qualification, for storage of the data in a readily accessible electronic form, and to assist in the analysis and presentation of the data. This document gives the status of NDMAS processing and qualification of data associated with the initial reactor cycle (147A) of the second Advanced Gas Reactor (AGR-2) experiment which began on June 21, 2010. Because it is early in the AGR-2 experiment, data from only two AGR-2 data streams are reported on: Fuel Fabrication and Fuel Irradiation data. As of August 1, 2010, approximately 311,000 irradiation data records have been stored in NDMAS, and qualification tests are in progress. Preliminary information indicates that TC 2 in Capsule 2 failed prior to start of the experiment, and NDMAS testing has thus far identified only two invalid data values from the METSO data collection system Data from the Fission Product Monitoring System (FPMS) are not currently processed until after reactor cycle shutdown and have not yet been received. A description of the ATR operating conditions data associated with the AGR-2 experiment (e.g., power levels) are summarized in the AGR-1 data qualification report (INL/EXT-09-16460). Since ATR data are collected under ATR program data quality requirements (i.e., outside the VHTR program), the NGNP program and NDMAS do not take additional actions to qualify these data other than NDMAS capture testing. Data qualification of graphite characterization data collected under the Graphite Technology Development Project is reported in a separate status report (Hull 2010).

Qualification of Electrical Components in Nuclear Power Plants. Management of Ageing

Energy Technology Data Exchange (ETDEWEB)

Spaang, Kjell [Ingemansson Technology AB, Goeteborg (Sweden); Staahl, Gunnar [Westinghouse Atom, Vaesteraas (Sweden)

2002-05-01

This report reviews R and D results and experiences forming the bases for the preparation of a report on management of ageing. It includes basic information and descriptions of value for persons who work with the questions and some data from investigations of the ageing characteristics of various materials: limit levels, dose-rate effects, activation energies, methods for condition monitoring, etc. This report is restricted to safety related components containing ageing sensitive parts, mainly organic materials (polymers). For components located in the containment, the possibilities of continuous supervision are limited. The accessibility for regular inspections is also limited in many cases. Therefore, the main part of this report deals with the qualification of such components. In addition, some material is given on qualification located outside containment with better possibilities for frequent inspection and supervision. A survey is made of activities, programs and tools for ageing qualification in connection with initial environmental qualification (type testing) as well as after installation (condition monitoring, extension of qualified life through on-going qualification). Tools are also given for supplementary ageing qualification of already installed components.

Qualification of Electrical Components in Nuclear Power Plants. Management of Ageing

International Nuclear Information System (INIS)

Spaang, Kjell; Staahl, Gunnar

2002-05-01

This report reviews R and D results and experiences forming the bases for the preparation of a report on management of ageing. It includes basic information and descriptions of value for persons who work with the questions and some data from investigations of the ageing characteristics of various materials: limit levels, dose-rate effects, activation energies, methods for condition monitoring, etc. This report is restricted to safety related components containing ageing sensitive parts, mainly organic materials (polymers). For components located in the containment, the possibilities of continuous supervision are limited. The accessibility for regular inspections is also limited in many cases. Therefore, the main part of this report deals with the qualification of such components. In addition, some material is given on qualification located outside containment with better possibilities for frequent inspection and supervision. A survey is made of activities, programs and tools for ageing qualification in connection with initial environmental qualification (type testing) as well as after installation (condition monitoring, extension of qualified life through on-going qualification). Tools are also given for supplementary ageing qualification of already installed components

Economies of using seismic experience data qualification methods at Department of Energy facilities

International Nuclear Information System (INIS)

Loceff, F.; Antaki, G.; Goen, L.

1995-01-01

This paper summarizes the implementation of the seismic qualification of existing equipment using experience data techniques. The emphasis is on the economies of this approach compared with standard qualification methods of analysis and testing or replacement with qualified equipment. Seismic qualification of existing equipment using experience data is a technical necessity and is the most economically attractive of the options. Representative costs for seismic qualification at two facilities show costs are substantially lower than the costs for qualification using conventional methods. Because of the experience to date, the authors recommend that the Department of Energy continue to sponsor the Existing Facilities Program for applying qualification using experience data techniques at DOE facilities

Qualifications of Subject Teachers in Special Education Schools

Science.gov (United States)

Rasmussen, Meryem Uçar; Kis, Arzu

2018-01-01

Teacher qualifications are essential to be able to teach children with special needs efficiently. Therefore the aim of this study is to determine the qualifications of subject teachers in special education schools in Turkey. In the study 20 subject teachers within the field of music, art and sports who worked in special education schools in Turkey…

14 CFR 121.909 - Approval of Advanced Qualification Program.

Science.gov (United States)

2010-01-01

... criteria. Each AQP must have separate curriculums for indoctrination, qualification, and continuing... the training and evaluation of CRM and technical skills and knowledge. An application for approval of... must meet all the requirements of this subpart. (2) Each indoctrination, qualification, and continuing...

42 CFR 21.47 - Examination; anticipation of meeting qualifications.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Examination; anticipation of meeting qualifications. 21.47 Section 21.47 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES PERSONNEL COMMISSIONED OFFICERS Appointment § 21.47 Examination; anticipation of meeting qualifications. A...

5 CFR 531.212 - Superior qualifications and special needs pay-setting authority.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Superior qualifications and special needs... Appointment Or Position Changes § 531.212 Superior qualifications and special needs pay-setting authority. (a) Agency authority. (1) An agency may use the superior qualifications and special needs pay-setting...

Qualification of box HEPA filters for nuclear applications

International Nuclear Information System (INIS)

Bergman, W.; Larsen, G.; Wilson, K.; Rainer, F.

1995-03-01

We have successfully completed qualification tests on high efficiency particulate air (HEPA) filters that are encapsulated within a box and manufactured by American Air Filters. The qualification tests are required by the American Society of Mechanical Engineers Standard ASME N509 and the U.S. Military Standard MIL-F-51068 for HEPA filters to be used in nuclear applications. The qualification tests specify minimum filter efficiencies following exposure to heated air, overpressure, and rough handling. Prior to this study, no box HEPA filters from any manufacturer had been qualified despite their wide-spread use in Department of Energy (DOE) facilities. Box HEPA filters are not addressed in any of the existing HEPA standards and only briefly discussed in the Nuclear Air Cleaning Handbook

Qualifications manual for Inspection and Enforcement personnel. Volume I. Detailed data sheets

International Nuclear Information System (INIS)

Bartley, H.J.; Heyer, F.H.K.; Schwartz, E.G.; Harrison, O.J.; Krass, I.W.; Welsh, D.M.

1978-06-01

This document is the General Research Corporation (GRC) final report on Task I Job/Position Qualifications Statements for the Headquarters and regional position of NRC/IE. It reflects the results of upgrading, expanding, and reformating the preliminary Task I report. To accomplish this, GRC made a thorough examination of all data developed during Task I, Task II (Career Fields), Task III (Training Evaluation), and Task IV (Hiring Qualifications), to include NRC/IE comments and management decisions received. The reformated Job/Position Qualifications Statements resulting from this effort (Appendix A) identify three job qualifications categories for each position--performance, attributes, and knowledge. Two formats are provided: a summarized one for manpower management in Volume I and a detailed one for career and training management in Volume II. In addition to recommending approval of the job/position qualifications, GRC proposes their use in conjunction with the hiring qualifications in the Task IV report to update NRC/IE job descriptions

Experience on environmental qualification of safety-related components for Darlington Nuclear Generating Station

International Nuclear Information System (INIS)

Yu, A.S.; Kukreti, B.M.

1987-01-01

The proliferation of Nuclear Power Plant safety concerns has lead to increasing attention over the Environmental Qualification (EQ) of Nuclear Power Plant Safety-Related Components to provide the assurance that the safety related equipment will meet their intended functions during normal operation and postulated accident conditions. The environmental qualification of these components is also a Licensing requirement for Darlington Nuclear Generating Station. This paper provides an overview of EQ and the experience of a pilot project, in the qualification of the Main Moderator System safety-related functions for the Darlington Nuclear Generating Station currently under construction. It addresses the various phases of qualification from the identification of the EQ Safety-Related Components List, definition of location specific service conditions (normal, adbnormal and accident), safety-related functions, Environmental Qualification Assessments and finally, an EQ system summary report for the Main Moderator System. The results of the pilot project are discussed and the methodology reviewed. The paper concludes that the EQ Program developed for Darlington Nuclear Generating Station, as applied to the qualification of the Main Moderator System, contained all the elements necessary in the qualification of safety-related equipment. The approach taken in the qualification of the Moderator safety-related equipment proves to provide a sound framework for the qualification of other safety-related components in the station

Qualifications Frameworks and Their Conflicting Social Imaginaries of Globalisation

Science.gov (United States)

Louise Sarauw, Laura

2012-01-01

Critics often see the European Bologna Process as a univocal standardisation of higher education. By exploring how different qualifications frameworks project different social imaginaries of globalisation, this article takes a different stance. The overarching qualifications framework of the Bologna Process rests on a socially constituted and…

48 CFR 1252.237-70 - Qualifications of contractor employees.

Science.gov (United States)

2010-10-01

... contractor employees. 1252.237-70 Section 1252.237-70 Federal Acquisition Regulations System DEPARTMENT OF....237-70 Qualifications of contractor employees. As prescribed in (TAR) 48 CFR 1237.110(a), insert the following clause: Qualifications of Contractor Employees (APR 2005) a. Definitions. As used in this clause...

Qualification of electrical equipment. A United States nuclear system supplier perspective

International Nuclear Information System (INIS)

Jordan, W.G.

1978-01-01

At Westinghouse Pressurized Water Reactor Systems Division (PWR-SD) qualification. of safety related electrical equipment can be segregated into three distinct generations: (1) the initial seismic and environmental qualification programs for electrical equipment (1969-1972); (2) the supplemental sismic and environmental qualification programs (1975-1977); and (3) the seismic and environmental qualification programs to meet IEEE-323-1974, IEEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations''(1975). The latter two programs (in a licensing framework), as they are most current, with emphasis on electrical equipment (e.g. transmitters, rack mounted equipment) as opposed to electro-mechanical equipment (valve operators, pump motors) are reviewed. (author)

The Origins of Belief Representation: Monkeys Fail to Automatically Represent Others’ Beliefs

Science.gov (United States)

Martin, Alia; Santos, Laurie R.

2014-01-01

Young infants’ successful performance on false belief tasks has led several researchers to argue that there may be a core knowledge system for representing the beliefs of other agents, emerging early in human development and constraining automatic belief processing into adulthood. One way to investigate this purported core belief representation system is to examine whether non-human primates share such a system. Although non-human primates have historically performed poorly on false belief tasks that require executive function capacities, little work has explored how primates perform on more automatic measures of belief processing. To get at this issue, we modified Kovács et al. (2010)’s test of automatic belief representation to examine whether one non-human primate species—the rhesus macaque (Macaca mulatta)—is automatically influenced by another agent’s beliefs when tracking an object’s location. Monkeys saw an event in which a human agent watched an apple move back and forth between two boxes and an outcome in which one box was revealed to be empty. By occluding segments of the apple’s movement from either the monkey or the agent, we manipulated both the monkeys’ belief (true or false) and agent’s belief (true or false) about the final location of the apple. We found that monkeys looked longer at events that violated their own beliefs than at events that were consistent with their beliefs. In contrast to human infants, however, monkeys’ expectations were not influenced by another agent’s beliefs, suggesting that belief representation may be an aspect of core knowledge unique to humans. PMID:24374209

Credentialed Chefs as Certified Wellness Coaches: Call for Action.

Science.gov (United States)

Polak, Rani; Sforzo, Gary A; Dill, Diana; Phillips, Edward M; Moore, Margaret

2015-12-01

Beneficial relationships exist between food preparation skills and improved dietary quality, and between times spent preparing food and mortality. Food shopping, meal planning, preparation and cooking skills are valuable in supporting good health. Thus experts are proposing nutritional counseling be expanded to include these beneficial behavioral skills. Educational programs delivered by chefs have recently emerged as a way to improve engagement with nutritional guidelines. It is reasonable to assume that a chef with behavior change knowledge and skills, such as coaching, may be more effective in facilitating behavior change. We encourage chefs who wish to be involved in promoting health-related behavior change to consider continuing education in coaching knowledge and skills. We also recommend culinary schools to consider offering these courses, to aspiring chefs. Such programming will not only benefit future clients but also offers a career- enriching professional opportunity to chefs. Credentialed chefs can make a positive health impact and should be included as professionals who are eligible for the impending national certification of health and wellness coaches. Copyright © 2015. Published by Elsevier Ltd.

IMRT credentialing for prospective trials using institutional virtual phantoms: results of a joint European Organization for the Research and Treatment of Cancer and Radiological Physics Center project

International Nuclear Information System (INIS)

Weber, Damien C; Vallet, Veronique; Molineu, Andrea; Melidis, Christos; Teglas, Vanda; Naudy, Suzanne; Moeckli, Raphael; Followill, David S; Hurkmans, Coen W

2014-01-01

Intensity-modulated radiotherapy (IMRT) credentialing for a EORTC study was performed using an anthropomorphic head phantom from the Radiological Physics Center (RPC; RPC PH ). Institutions were retrospectively requested to irradiate their institutional phantom (INST PH ) using the same treatment plan in the framework of a Virtual Phantom Project (VPP) for IMRT credentialing. CT data set of the institutional phantom and measured 2D dose matrices were requested from centers and sent to a dedicated secure EORTC uploader. Data from the RPC PH and INST PH were thereafter centrally analyzed and inter-compared by the QA team using commercially available software (RIT; ver.5.2; Colorado Springs, USA). Eighteen institutions participated to the VPP. The measurements of 6 (33%) institutions could not be analyzed centrally. All other centers passed both the VPP and the RPC ±7%/4 mm credentialing criteria. At the 5%/5 mm gamma criteria (90% of pixels passing), 11(92%) as compared to 12 (100%) centers pass the credentialing process with RPC PH and INST PH (p = 0.29), respectively. The corresponding pass rate for the 3%/3 mm gamma criteria (90% of pixels passing) was 2 (17%) and 9 (75%; p = 0.01), respectively. IMRT dosimetry gamma evaluations in a single plane for a H&N prospective trial using the INST PH measurements showed agreement at the gamma index criteria of ±5%/5 mm (90% of pixels passing) for a small number of VPP measurements. Using more stringent, criteria, the RPC PH and INST PH comparison showed disagreement. More data is warranted and urgently required within the framework of prospective studies

ENIQ: European Network for Inspection Qualification: Status report

International Nuclear Information System (INIS)

Champigny, F.; Sandberg, U.; Crutzen, S.; Lemaitre, P.

1998-01-01

The European Network for Inspection Qualification (ENIQ) groups the major part of the nuclear power plant operators in the European Union (and Switzerland). The main objective of ENIQ is to co-ordinate and manage at European level expertise and resources for the qualification of NDE inspection systems, primarily for nuclear components. In this paper the main activities, organisation and actual status of ENIQ are discussed. (author)

European methodology for qualification of NDT as developed by ENIQ

International Nuclear Information System (INIS)

Champigny, F.; Sandberg, U.; Engl, G.; Crutzen, S.; Lemaitre, P.

1997-01-01

The European Network for Inspection Qualification (ENIQ) groups the major part of the nuclear power plant operators in the European Union (and Switzerland). The main objective of ENIQ is to co-ordinate and manage at European level expertise and resources for the qualification of NDE inspection systems, primarily for nuclear components. In the framework of ENIQ the European methodology for qualification of NDT has been developed. In this paper the main principles of the European methodology are given besides the main activities and organisation of ENIQ. (orig.)

Changing nature of equipment and parts qualification

International Nuclear Information System (INIS)

Bucci, R.M.

1988-01-01

Ideally, the original supplier of a piece of nuclear safety-related equipment has performed a qualification program and will continue to support that equipment throughout the lifetime of the nuclear power plants in which in equipment is installed. The supplier's nuclear quality assurance program will be maintained and he will continue to offer all necessary replacement parts. These parts will be identical to the original parts, certified to the original purchase order requirements, and the parts will be offered at competitive prices. Due to the changing nature of the nuclear plant equipment market, however, one or more of those ideal features are frequently unavailable when safety-related replacement equipment or parts are required. Thus, the process of equipment and parts qualification has had to adjust in order to ensure obtaining qualified replacements when needed. This paper presents some new directions taken in the qualification of replacement equipment and parts to meet changes in the marketplace

12 CFR 231.3 - Qualification as a financial institution.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Qualification as a financial institution. 231.3... RESERVE SYSTEM NETTING ELIGIBILITY FOR FINANCIAL INSTITUTION (REGULATION EE) § 231.3 Qualification as a financial institution. (a) A person qualifies as a financial institution for purposes of sections 401-407 of...

Lower-Level Qualifications as a Stepping Stone for Young People. Occasional Paper

Science.gov (United States)

Oliver, Damian

2012-01-01

Lower-level qualifications (certificate I and II programs) provide little or no immediate return to the individual in terms of increased wages. However, lower-level qualifications are intended to prepare students who would otherwise not be capable of enrolling in and completing a higher-level qualification or making a successful transition into…

Nuclear Criticality Safety Organization qualification program. Revision 4

International Nuclear Information System (INIS)

Carroll, K.J.; Taylor, R.G.; Worley, C.A.

1997-01-01

The Nuclear Criticality Safety Organization (NCSO) is committed to developing and maintaining a staff of highly qualified personnel to meet the current and anticipated needs in Nuclear Criticality Safety (NCS) at the Oak Ridge Y-12 Plant. This document defines the Qualification Program to address the NCSO technical and managerial qualification as required by the Y-12 Training Implementation Matrix (TIM). It is implemented through a combination of LMES plant-wide training courses and professional nuclear criticality safety training provided within the organization. This Qualification Program is applicable to technical and managerial NCSO personnel, including temporary personnel, sub-contractors and/or LMES employees on loan to the NCSO, who perform the NCS tasks or serve NCS-related positions as defined in sections 5 and 6 of this program

Nuclear criticality safety specialist training and qualification programs

International Nuclear Information System (INIS)

Hopper, C.M.

1993-01-01

Since the beginning of the Nuclear Criticality Safety Division of the American Nuclear Society (ANS) in 1967, the nuclear criticality safety (NCS) community has sought to provide an exchange of information at a national level to facilitate the education and development of NCS specialists. In addition, individual criticality safety organizations within government contractor and licensed commercial nonreactor facilities have developed training and qualification programs for their NCS specialists. However, there has been substantial variability in the content and quality of these program requirements and personnel qualifications, at least as measured within the government contractor community. The purpose of this paper is to provide a brief, general history of staff training and to describe the current direction and focus of US DOE guidance for the content of training and qualification programs designed to develop NCS specialists

Instructor qualification for radiation safety training at a national laboratory

International Nuclear Information System (INIS)

Trinoskey, P.A.

1994-10-01

Prior to 1993, Health Physics Training (HPT) was conducted by the Lawrence Livermore National Laboratory (LLNL) health physics group. The job requirements specified a Masters Degree and experience. In fact, the majority of Health Physicists in the group were certified by the American Board of Health Physics. Under those circumstances, it was assumed that individuals in the group were technically qualified and the HPT instructor qualification stated that. In late 1993, the Health Physics Group at the LLNL was restructured and the training function was assigned to the training group. Additional requirements for training were mandated by the Department of Energy (DOE), which would necessitate increasing the existing training staff. With the need to hire, and the policy of reassignment of employees during downsizing, it was imperative that formal qualification standards be developed for technical knowledge. Qualification standards were in place for instructional capability. In drafting the new training qualifications for instructors, the requirements of a Certified Health Physicists had to be modified due to supply and demand. Additionally, for many of the performance-based training courses, registration by the National Registry of Radiation Protection Technologists is more desirable. Flexibility in qualification requirements has been incorporated to meet the reality of ongoing training and the compensation for desirable skills of individuals who may not meet all the criteria. The qualification requirements for an instructor rely on entry-level requirements and emphasis on goals (preferred) and continuing development of technical and instructional capabilities

Environmental qualification program for Wolsong project

International Nuclear Information System (INIS)

Duggal, A.; Johal, H.; Yee, F.; Suh, S.K.

1995-01-01

The Wolsong EQ Program is a process that begins at the design concept stage and continues throughout the operating life of the station. As all components may not have a 30 year service life without periodic maintenance, the EQ Program becomes an important management tool for the owner of the plant. First, the environmental conditions are predicted for the postulated events. Next, suitably qualified equipment is specified and procured. Then the equipment is installed according to specific instructions. Finally, by means of ongoing maintenance and replacement of parts, the qualification of the equipment is maintained during the operating life of the plant. Proper documentation and traceability is required at all stages of the program. As defined in the Wolsong Project Environmental Qualification Design Guide a comprehensive Environmental Qualification (EQ) Program ensures that safety related equipment located in an area in which a harsh environment could occur, can function when required for the life of the station . This program was implemented at the beginning of the Wolsong project. Using this program, components/equipment are qualified prior to installation and a maintenance program is established to keep equipment 'qualified' throughout the station life

Qualification Paths of Adult Educators in Sweden and Denmark

Science.gov (United States)

Andersson, Per; Kopsen, Susanne; Larson, Anne; Milana, Marcella

2013-01-01

The qualification of adult educators is a central aspect of the quality of adult education. However, within current policy discourses and adult education research on the professional development of prospective adult educators, little attention is paid to teacher qualification when compared to other fields of education and training. In this study,…

Conscious Belief

Directory of Open Access Journals (Sweden)

David Pitt

2016-04-01

Full Text Available Tim Crane maintains that beliefs cannot be conscious because they persist in the absence of consciousness. Conscious judgments can share their contents with beliefs, and their occurrence can be evidence for what one believes; but they cannot be beliefs, because they don’t persist. I challenge Crane’s premise that belief attributions to the temporarily unconscious are literally true. To say of an unconscious agent that she believes that p is like saying that she sings well. To say she sings well is to say that when she sings, her singing is good. To say that she believes that p is (roughly to say that when she consciously considers the content that p she consciously affirms (believes it. I also argue that the phenomenal view of intentional content Crane appears to endorse prima facie commits him to the view, at least controversial, perhaps incoherent, that there is unconscious phenomenology (the intentional contents of unconscious beliefs.

Selection, qualification and training of personnel for nuclear power plants

International Nuclear Information System (INIS)

Anon.

1981-01-01

This standard provides criteria for the selection, qualification and training of personnel for stationary nuclear power plants. Qualifications, responsibilities, and training of personnel in operating and support organizations appropriate for the safe and efficient operation of nuclear power plants are addressed

Passive autocatalytic recombiner process features and new status of international qualification

International Nuclear Information System (INIS)

Eckardt, Bernd A.; Losch, Norbert

2010-01-01

New results of International PAR-Severe Accidents Qualification in frame of EC/IRSN Core Melt Program PHEBUS (with real molten core) are presented. Example Results: AREVA PAR Design: Best performance very fast start-up • highest efficiency absolutely constant hydrogen depletion rates. Others: Some industrial competitors failed. This enveloping real severe accident tests represents the new international PAR qualification standard and finalized the PAR qualification successfully. The design features supports PAR Dual function

Qualification of uranium-molybdenum alloy fuel - conclusions of an international workshop

International Nuclear Information System (INIS)

Snelgrove, J.L.; Languille, A.

2000-01-01

Thirty-one participants representing 21 reactors, fuel developers, fuel fabricators, and fuel reprocessors in 11 countries discussed the requirements for qualification of U-Mo alloy fuel at a workshop held at Argonne National Laboratory on January 17-18, 2000. Consensus was reached that the qualification plans of the U.S. RERTR program and the French U-Mo fuel development program are valid. The items to be addressed during qualification are summarized in the paper. (author)

The implementing of the training, examination and qualification for QA auditor

International Nuclear Information System (INIS)

Ma Xiaozheng; Han Peicong; Zhang Zhongyuan; Zhu Guoliang

2007-01-01

China Power Investment Corporation has implemented the training, examination and qualification for QA auditor based on the related requirements of the nuclear safety documents. The bases, planning of the procedure, implementing procedure and suggestions for implementing the training, examination and qualification are described in this article. That can be used as the reference for implementing the training, examination and qualification for QA auditor, as well as for establishment of the related guide. (authors)

Understanding to requirements for educational level in qualification of reactor operators

International Nuclear Information System (INIS)

Zhang Chi; Yang Di; Zhou Limin

2007-01-01

Requirements for qualification of reactor operators in nuclear safety regulations were discussed in this paper. The new issue was described in the confirmation of education level of reactor operators. The understanding to the requirements for Educational Level in Qualification of Reactor Operators was provided according to Higher Education Law of the People's Republic of China. It was proposed to improve the confirmation of qualification of reactor operators as soon as possible. (authors)

Helicopter-Ship Qualification Testing

NARCIS (Netherlands)

Hoencamp, A.

2015-01-01

The goal of this research project is to develop a novel test methodology which can be used for optimizing cost and time efficiency of helicopter-ship qualification testing without reducing safety. For this purpose, the so-called “SHOL-X” test methodology has been established, which includes the

12 CFR 563c.3 - Qualification of public accountant.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Qualification of public accountant. 563c.3... REQUIREMENTS Form and Content of Financial Statements § 563c.3 Qualification of public accountant. (See also 17 CFR 210.2-01.) The term “qualified public accountant” means a certified public accountant or licensed...

Unresolved Safety Issue A-46 - seismic qualification of equipment in operating plants

International Nuclear Information System (INIS)

Anderson, N.

1985-01-01

Seismic Qualification of Equipment in Operating Plants was designated as an Unresolved Safety Issue (USI) in December, 1980. The USI A-46 program was developed in early 1981 to investigate the adequacy of mechanical and electrical equipment in operating plants to withstand a safe shutdown earthquake. The approach taken was to develop viable, cost effective alternatives to current seismic qualification licensing requirements which could be applied to operating nuclear power plants. The tasks investigated include: (1) identification of seismic sensitive systems and equipment; (2) assessment of adequacy of existing seismic qualification methods; (3) development and assessment of in-situ test procedures to assist in qualification of equipment; (4) seismic qualification of equipment using seismic experience data; and (5) development of methods to generate generic floor response spectra. Progress to date and plans for completion of resolution are reported

Strategic Belief Management

DEFF Research Database (Denmark)

Foss, Nicolai Juul

While (managerial) beliefs are central to many aspects of strategic organization, interactive beliefs are almost entirely neglected, save for some game theory treatments. In an increasingly connected and networked economy, firms confront coordination problems that arise because of network effects....... The capability to manage beliefs will increasingly be a strategic one, a key source of wealth creation, and a key research area for strategic organization scholars.......While (managerial) beliefs are central to many aspects of strategic organization, interactive beliefs are almost entirely neglected, save for some game theory treatments. In an increasingly connected and networked economy, firms confront coordination problems that arise because of network effects...

78 FR 53025 - Pilot Certification and Qualification Requirements for Air Carrier Operations; Correction

Science.gov (United States)

2013-08-28

...-0100; Amdt. No. 141-17A] RIN 2120-AJ67 Pilot Certification and Qualification Requirements for Air... regulations to create new certification and qualification requirements for pilots in air carrier operations..., the FAA published a final rule entitled, ``Pilot Certification and Qualification Requirements for Air...

Qualification issues: the rest of the iceberg

International Nuclear Information System (INIS)

Bonzon, L.L.; Luna, R.E.

1978-01-01

Reactor safety has been a primary concern since the beginning of commercial power reactor development. But only since the IEEE became actively involved (circa-1970), through IEEE-323-1971 and its predecessor drafts, has the qualification of selected Class 1 equipment been formalized and intensified. Currently EPRI and the USNRC are funding significant qualification research programs. However, these current research topics address only a few of the issues and there are more to come. A review of recent achievements and a discussion of some issues still to be encountered are presented

Minimum qualifications for nuclear criticality safety professionals

International Nuclear Information System (INIS)

Ketzlach, N.

1990-01-01

A Nuclear Criticality Technology and Safety Training Committee has been established within the U.S. Department of Energy (DOE) Nuclear Criticality Safety and Technology Project to review and, if necessary, develop standards for the training of personnel involved in nuclear criticality safety (NCS). The committee is exploring the need for developing a standard or other mechanism for establishing minimum qualifications for NCS professionals. The development of standards and regulatory guides for nuclear power plant personnel may serve as a guide in developing the minimum qualifications for NCS professionals

Introducing the modified paranormal belief scale: distinguishing between classic paranormal beliefs, religious paranormal beliefs and conventional religiosity among undergraduates in Northern Ireland and Wales

OpenAIRE

Williams, Emyr; Francis, Leslie J.; Lewis, Christopher Alan

2009-01-01

Previous empirical studies concerned with the association between paranormal beliefs and conventional religiosity have produced conflicting evidence. Drawing on Rice's (2003) distinction between classic paranormal beliefs and religious paranormal beliefs, the present study proposed a modified form of the Tobacyk Revised Paranormal Belief Scale to produce separate scores for these two forms of paranormal belief, styled 'religious paranormal beliefs' and 'classic paranormal beliefs'. Data provi...

The Relationships among Chinese Practicing Teachers' Epistemic Beliefs, Pedagogical Beliefs and Their Beliefs about the Use of ICT

Science.gov (United States)

Deng, Feng; Chai, Ching Sing; Tsai, Chin-Chung; Lee, Min-Hsien

2014-01-01

This study aimed to investigate the relationships among practicing teachers' epistemic beliefs, pedagogical beliefs and their beliefs about the use of ICT through survey methodology. Participants were 396 high school practicing teachers from mainland China. The path analysis results analyzed via structural equation modelling technique indicated…

Recursive belief manipulation and second-order false-beliefs

DEFF Research Database (Denmark)

Braüner, Torben; Blackburn, Patrick Rowan; Polyanskaya, Irina

2016-01-01

it indicate that a more fundamental *conceptual change* has taken place? In this paper we extend Braüner's hybrid-logical analysis of first-order false-belief tasks to the second-order case, and argue that our analysis supports a version of the conceptual change position.......The literature on first-order false-belief is extensive, but less is known about the second-order case. The ability to handle second-order false-beliefs correctly seems to mark a cognitively significant step, but what is its status? Is it an example of *complexity only* development, or does...

Generic test procedure for the qualification of a nuclear emergency generator

International Nuclear Information System (INIS)

Simonis, J.C.; Bowman, S.W.

1985-01-01

This paper describes the proposed analytical and experimental procedures for the qualification of the standby generators and exciters used in the Emergency Diesel Generator Systems in a nuclear power plant. The components which require qualification are identified through a failure mode analysis of the systems conducted using engineering drawings updated to include all field changes. The qualification of each component includes the margins given in IEEE Std. 323-1974, ''Qualifying Class 1E Equipment for Nuclear Power Generating Stations.'' These margins are combined with the plant specific data to define an enveloping set of environmental parameters. This set of enveloping parameters, plus margin, form the bases for the analysis or test qualification tasks. Proposed qualification of the composite electrical insulation systems used in the generator and exciter on the form or random wound coils is by traceable testing. However, before testing the thermal and radiation degradation data used in the design of the generator and exciter are evaluated to identify if these data are sufficiently traceable to eliminate the need for additional insulation tests. The required tests are guided by applicable standards

Qualification of non-destructive examination for belgian nuclear reactor pressure vessel inspection

International Nuclear Information System (INIS)

Couplet, D.; Francoise, T.

2001-01-01

In Service Inspection (ISI) participates to the assessment of Nuclear Reactor Pressure Vessel Integrity. The performance of Non Destructive Examination (NDE) techniques must be demonstrated according to predefined objectives. The qualification process is essential to trust the reliability of the information provided by NDE. In Belgian Nuclear Power Plants, the qualification was conducted through a collaboration between the vendor and a technical group from the Electricity Utility. The important facts of this qualification will be presented: - the detailed definition of the inspection and qualifications objectives, based on a combination of the ASME code and the European Methodology for Qualification; - the systematic verification of the NDE performance and limitations, for each ISI objective, through an adequate combination of tests on blocks and technical justification; - the continuous improvement of the NDE procedure; - the feedback and the lessons learnt from site experience; - the necessary multi-disciplinary approach (NDE, degradation mechanisms, structural integrity)

Impact of pre-conditioning on the qualification of safety-related equipment

International Nuclear Information System (INIS)

Isgro, J.R.

1982-01-01

This paper shares some recent experiences on the effects of preconditioning on the qualification of safety-related equipment not located in a harsh environment. Environmental and seismic qualification testing programs were conducted following the guidelines of IEEE 323-1974, IEEE 344-1975 and appropriate IEEE daughter standards, where available. The examples that follow will illustrate the degree of pre-conditioning of safety-related equipment qualified to the requirements of IEEE-323-1974, and its effect on the outcome of the qualification program

Progress on EPRI electrical equipment qualification research

International Nuclear Information System (INIS)

Sliter, G.E.

1983-01-01

The objective of EPRI's electrical equipment qualification research program is to provide technical assistance to utilities in meeting nuclear plant safety requirements in a manner consistent with the state of the art. This paper reports progress on several research projects including: radiation effects studies, which compile data on degradation of organic materials in electrical equipment exposed to operational and accident radiation doses; the Equipment Qualification Data Bank, which is a remotely accessible computer system for disseminating qualification information on in-plant equipment, seismic data, and materials data; an aging/seismic correlation program, which is providing test data showing that, in many cases, age degradation has a negligibly small effect on the performance of electrical components under seismic excitation; a review of condition monitoring techniques, which has identified surveillance methods for measuring key performance parameters that have the potential for predicting remaining equipment life; and large-scale hydrogen burn equipment response tests, which are providing data to assess the ability of equipment to remain functional during and after hydrogen burning in postulated degraded core accidents

Software qualification of selected TOUGH2 modules

International Nuclear Information System (INIS)

Wu, Y.S.; Ahlers, C.F.; Fraser, P.; Simmons, A.; Pruess, K.

1996-10-01

The purpose of this package of reports is to provide all software baseline documents necessary for the software qualification of the single-phase Gas (EOS1G), Effective Continuum Method (ECM), Saturated/Unsaturated Flow (EOS9), and Radionuclide Transport (T2R3D) modules of TOUGH2, a numerical simulation code for multi-dimensional coupled fluid and heat flow of multiphase, multicomponent fluid mixtures in porous and fractured media. This report contains the following sections: (1) Requirements Specification, (2) Design Description, (3) Software Validation Test Plan and Report, (4) Software User Documentation, and (5) Appendices. These sections comprise sequential parts of the Software Life Cycle, and are not intended to stand alone but should be used in conjunction with the TOUGH User's Guide (Pruess, 1987), TOUGH2--A General Purpose Numerical Simulator for Multiphase Fluid and Heat Flow (Pruess, 1991), and the above-referenced TOUGH2 software qualification document. The qualification package is complete with the attached Software Identification Form and executable source code for the single-phase Gas, Effective Continuum method, Saturated/Unsaturated Flow, and Radionuclide Transport modules of TOUGH2

46 CFR 2.75-70 - Welding procedure and performance qualifications.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Welding procedure and performance qualifications. 2.75... for Construction Personnel § 2.75-70 Welding procedure and performance qualifications. (a) Welding... requirements for the welding of pressure piping, boilers, pressure vessels, and nonpressure vessel type tanks...

Return of IEEE Std 627 and its Value to Equipment Qualification Programs

International Nuclear Information System (INIS)

Horvath, D.A.

2012-01-01

IEEE Std 627 ''Design Qualification of Safety Systems Equipment Used in Nuclear Power Generating Stations'' was issued to more generically establish qualification requirements in the form of a high level umbrella document. Efforts on this standard began in late 1975 at the request of the IEEE Nuclear Standards Management Board. In 1977 a joint ASME/IEEE agreement established responsibility for qualification and quality assurance standards preparation. ASME accepted responsibility for Quality Assurance and IEEE for qualification. In accordance with that agreement, IEEE completed the generic qualification standard in 1980. This document provided high level approaches, criteria, guidance, and principles for qualification of both electrical and mechanical equipment that at that time appeared in no other industry standard. IEEE Std 627-1980 was later reaffirmed in 1996. In 1986, ASME's Board on Nuclear Codes and Standards directed its Committee on Qualification of Mechanical Equipment (QME) to develop a standard for qualifying mechanical equipment. This task was completed in several parts during the time frame from 1992 to 1994. Partly in response to this activity, IEEE Std 627 was withdrawn in 2002. Later although withdrawn, it was found that IEEE Std 627 was continuing to be used and referenced by many entities both in the US and other countries including in ASME's QME-1-2002 ''Qualification of Active Mechanical Equipment Used in Nuclear Power Plants'', US NRC's NUREG-0800 Standard Review Plan Section 3.11, at least one reactor vendor's Design Certification Document (DCD), several international licensing documents, and elsewhere. As a result, in 2007, the IEEE Standards Board authorized Working Group 2.10 of Subcommittee 2 (Qualification) of the Power and Energy Society's Nuclear Power Engineering Committee to resurrect and update IEEE Std 627-1980 (Reaff 1996). The result was the culmination IEEE Std 627 in 2010. This paper will report on the eight improvements made

25 CFR 117.26 - Expenses incurred pending qualification of an executor or administrator.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Expenses incurred pending qualification of an executor or... HAVE CERTIFICATES OF COMPETENCY § 117.26 Expenses incurred pending qualification of an executor or administrator. Pending the qualification of the executor or administrator of the estate of a deceased Indian of...

AP-102/104 Retrieval control system qualification test procedure

International Nuclear Information System (INIS)

RIECK, C.A.

1999-01-01

This Qualification Test Procedure documents the results of the qualification testing that was performed on the Project W-211, ''Initial Tank Retrieval Systems,'' retrieval control system (RCS) for tanks 241-AP-102 and 241-AP-104. The results confirm that the RCS has been programmed correctly and that the two related hardware enclosures have been assembled in accordance with the design documents

The path from biomarker discovery to regulatory qualification

CERN Document Server

Goodsaid, Federico

2013-01-01

The Path from Biomarker Discovery to Regulatory Qualification is a unique guide that focuses on biomarker qualification, its history and current regulatory settings in both the US and abroad. This multi-contributed book provides a detailed look at the next step to developing biomarkers for clinical use and covers overall concepts, challenges, strategies and solutions based on the experiences of regulatory authorities and scientists. Members of the regulatory, pharmaceutical and biomarker development communities will benefit the most from using this book-it is a complete and practical guide to biomarker qualification, providing valuable insight to an ever-evolving and important area of regulatory science. For complimentary access to chapter 13, 'Classic' Biomarkers of Liver Injury, by John R. Senior, Associate Director for Science, Food and Drug Administration, Silver Spring, Maryland, USA, please visit the following site:  http://tinyurl.com/ClassicBiomarkers Contains a collection of experiences of different...

Qualification of flat welding of nuclear fuel bars

International Nuclear Information System (INIS)

Romero C, J.; Rivera M, H.

2001-01-01

The qualification of flat welding consists in the process (procedures (11), instructions (5), specifications (4) and programs (3)) and equipment (systems (4), equipment (6)) with the Personal Qualification (operators and supervisors) that was done in simultaneous form and supported with test and training programs with its respective technical reports, liberated by the Quality Assurance Office of ININ. Moreover, specific procedures of process and personal qualification are realized with the respective supervision by Quality Assurance Office. For the process, 20 welding were realized as follow: 5 welding with maximum contributing of heat, 10 welding with nominal contributing of heat, 5 welding with minimum contributing of heat. The heat contributing for the qualification was done maximum, of increasing the welding current, diminishing the helium flux and the revolutions per minute of the bar, at the moment of welding, with respect to nominal values. In the minimum contributing of heat it is diminished the welding current, increasing the helium flux and the revolutions per minute of the bar with respect to nominal values. With the qualification it has been finished the development of flat welding with results which define an own method of ININ. It was implemented a pneumatic system, for the elimination of micron cracks. It was required a control of turn velocity of the bar of hundredth of revolution. Moreover the main welding parameters each 40 μs are acquired. Also it was automated completely the process to avoid possible human mistakes. The standard deviations of the values of the realized inspections in the quality, are lower. Process, equipment and personnel with their respective Quality reports and registries are qualified, as well as the Quality certificates of two operators and one supervisor. (Author)

The Humanitarian Action Qualifications Framework: a quality assurance tool for the Humanitarian Sector

Directory of Open Access Journals (Sweden)

Bastiaan L. Aardema

2014-07-01

Full Text Available The article presents the European Universities on Professionalisation on Humanitarian Action (EUPRHA Project as an initiative that seeks to contribute to the professionalisation and quality assurance of the humanitarian sector. Its purpose is to explain the approach and the process leading to the development of the Humanitarian Action Qualifications Framework as an example of good practice for other sectors aiming at improving the recognition of qualifications as a precondition of academic and professional mobility. With this aim, it introduces the educational and humanitarian trends that led to this project: the move from transnational qualifications frameworks of which the European Qualifications Framework for Lifelong Learning (EQF is the best example to sectoral qualifications frameworks and the increasing demand from the sector seeking to determine the competencies and required skills of a professional humanitarian aid worker. Based on the EQF and the Tuning methodology the framework will act as a translating device to make national and sectoral qualifications more readable and promote humanitarian workers’ and learners’ mobility between countries and organisations. It will facilitate inter-system transparency and recognition of (non-formal and informal learning by linking occupations, skills, competences, and qualifications, thus benefiting the Humanitarian Sector as a whole.

Reliability of iris recognition as a means of identity verification and future impact on transportation worker identification credential

OpenAIRE

McLaren, Simon R.

2008-01-01

The Department of Homeland Security is deploying the Transportation Worker Identification Credential (TWIC) to U.S. ports to help ensure only authorized individuals having undergone background checks have access to secure areas. Congress mandated the TWIC have a biometric authenticator; DHS chose fingerprints. This thesis argues iris scanning is a better choice because of the nature of the maritime environment and because iris scanning is a more accurate biometric. This thesis also argues th...

Global National Qualifications Framework Inventory: Country Cases from EU and ETF Partner Countries

Science.gov (United States)

Cedefop - European Centre for the Development of Vocational Training, 2013

2013-01-01

Certificates, diplomas and titles are commonly known as qualifications. Their purpose is to show employers, training providers, and individuals what the person holding the qualification has learned and can do. Every country issues many different qualifications, but for the European labor market to work as intended--that is for European citizens to…

Religious beliefs are factual beliefs: Content does not correlate with context sensitivity.

Science.gov (United States)

Levy, Neil

2017-04-01

Neil Van Leeuwen argues that religious beliefs are not factual beliefs: typically, at least, they are attitudes of a different type. He argues that they exhibit much more sensitivity to context than factual beliefs: outside of contexts in which they are salient, they do not govern behaviour or inference, or provide background assumptions for cognition. This article surveys a large range of data to show that the kind of context sensitivity that Van Leeuwen thinks is the province of religious beliefs does not correlate with belief content. Beliefs about matters of fact beyond the theological realm exhibit this kind of sensitivity too. Conversely, theological and supernatural beliefs often guide behaviour across contexts. It is the intuitiveness of representations across contexts that predicts context (in)sensitivity, and intuitiveness is powerfully influenced by processing fluency. Fluency, in turn, is sensitive to cues that vary across contexts. Copyright © 2017 Elsevier B.V. All rights reserved.

Re-qualification of MTR-type fuel plates fabrication process

International Nuclear Information System (INIS)

Elseaidy, I.M.; Ghoneim, M.M.

2010-01-01

The fabricability issues with increased uranium loading due to use low enrichment of uranium (LEU), i.e. less than 20 % of U 235 , increase the problems which occur during compact manufacturing, roll bonding of the fuel plates, potential difficulty in forming during rolling process, mechanical integrity of the core during fabrication, potential difficulty in meat homogeneity, and the ability to fabricate plates with thicker core as a means of increasing total uranium loading. To produce MTR- type fuel plates with high uranium loading (HUL) and keep the required quality of these plates, many of qualification process must be done in the commissioning step of fuel fabrication plant. After that any changing of the fabrication parameters, for example changing of any of the raw materials, devises, operators, and etc., a re- qualification process should be done in order to keep the quality of produced plates. Objective of the present work is the general description of the activities to be accomplished for re-qualification of manufacturing MTR- type nuclear fuel plates. For each process to be re-qualified, a detailed of re-qualification process were established. (author)

Evolution of Religious Beliefs

CERN Multimedia

CERN. Geneva

2009-01-01

Humans may be distinguished from all other animals in having beliefs about the causal interaction of physical objects. Causal beliefs are a developmental primitive in human children; animals, by contrast, have very few causal beliefs. The origin of human causal beliefs comes from the evolutionary advantage it gave in relation to complex tool making and use. Causal beliefs gave rise religion and mystical thinking as our ancestors wanted to know the causes of events that affected their lives.

Emergency Management. Functional Area Qualification Standard

National Research Council Canada - National Science Library

2004-01-01

.... In support of this goal, the competency requirements defined in the Technical Qualification Standards should be aligned with and integrated into the recruitment and staffing processes for technical positions...

Motivated reasoning during recruitment.

Science.gov (United States)

Kappes, Heather Barry; Balcetis, Emily; De Cremer, David

2018-03-01

This research shows how job postings can lead job candidates to see themselves as particularly deserving of hiring and high salary. We propose that these entitlement beliefs entail both personal motivations to see oneself as deserving and the ability to justify those motivated judgments. Accordingly, we predict that people feel more deserving when qualifications for a job are vague and thus amenable to motivated reasoning, whereby people use information selectively to reach a desired conclusion. We tested this hypothesis with a 2-phase experiment (N = 892) using materials drawn from real online job postings. In the first phase of the experiment, participants believed themselves to be more deserving of hiring and deserving of higher pay after reading postings composed of vaguer types of qualifications. In the second phase, yoked observers believed that participants were less entitled overall, but did not selectively discount endorsement of vaguer qualifications, suggesting they were unaware of this effect. A follow-up preregistered experiment (N = 905) using postings with mixed qualification types replicated the effect of including more vague qualifications on participants' entitlement beliefs. Entitlement beliefs are widely seen as problematic for recruitment and retention, and these results suggest that reducing the inclusion of vague qualifications in job postings would dampen the emergence of these beliefs in applicants, albeit at the cost of decreasing application rates and lowering applicants' confidence. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Qualification of quality testing personnel, in particular the training offered

International Nuclear Information System (INIS)

Knoedler, D.

1980-01-01

Personnel qualification is one of the most important tasks of quality assurance. The qualification is reached by professional education, by experience made on the job and by additional external and company-internal training. A determination of qualification requirements should cover only the general principles. Especially this should be considered specifying the requirements for theoretical knowledge and for examinations since the factor of relevant experience is difficult to be estimated by third parties. Equal principles apply for the personnel of the manufacturer, of the main contractor, of the utility and of the auhtorized inspectors' organizations. The detailed guidelines should be part of the internal QA-systems of the organizations involved. (orig.) [de

The moderating role of rational beliefs in the relationship between irrational beliefs and posttraumatic stress symptomology.

Science.gov (United States)

Hyland, Philip; Shevlin, Mark; Adamson, Gary; Boduszek, Daniel

2014-05-01

Rational Emotive Behaviour Therapy (REBT) assumes that rational beliefs act as cognitive protective factors against the development of psychopathology; however little empirical evidence exists regarding the nature of the possible protective effects that they offer. The current study investigates whether rational beliefs moderate the impact of irrational beliefs on posttraumatic stress symptomology (PTS). Three hundred and thirteen active law enforcement, military, and related emergency service personnel took part in the current study. Sequential moderated multiple regression analysis was employed to investigate: (i) the direct impact of irrational beliefs on PTS; (ii) the direct impact of rational beliefs on PTS; (iii) the moderating effects of rational beliefs in the relationship between irrational beliefs and PTS. The irrational beliefs predicted by REBT theory emerged as critical predictors of PTS symptomology, in particular Depreciation beliefs. Rational beliefs (Preferences, and Acceptance beliefs) had a direct, negative impact on levels of PTS, and Acceptance beliefs moderated the impact of Catastrophizing beliefs on PTS. Irrational beliefs are important cognitive vulnerability factors in symptoms of PTS, while rational beliefs (Acceptance) appear to have a protective role in the emergence of PTS symptoms, both directly and by moderating the impact of Catastrophizing beliefs.

Technical evaluation of seismic qualification of safety-related equipment

Energy Technology Data Exchange (ETDEWEB)

Cho, Yang Hui; Park, Heong Gee; Park, Yeong Seok [Univ. of Incheon, Incheon (Korea, Republic of)

1994-04-15

This study is purposed to evaluate the technical acceptability of the procedures and techniques of seismic qualifications which were performed for the YGN 3 and 4 safety-related equipment.This study is also targeted to suggest a systematized technical procedure guide for the effective performance and review of the seismic qualification, which reflects the most up-to-date licensing requirements and state-of the-art.

Space qualification of an experimental two-phase flow thermal management system

International Nuclear Information System (INIS)

Koonmen, J.P.; Carswell, L.C.; Kvansnak, M.A.

1991-01-01

The Weapons Laboratory will launch a space experiment in March 1991 to investigate the effects of extended microgravity on two-phase (liquid/vapor) flow. The qualification process for the experimental flight system hardware differs significantly from the process used for complex, high cost, long life space systems. Some development, qualification, and acceptance tests normally included in the test program of an operational space system were omitted because of the low program cost and low consequence of experiment failure. Key environment and functional qualification tests were performed, however, in an effort to reduce the risk of failure inherent in any space mission. The environmental qualification program included short duration vacuum chamber tests, reduced gravity missions onboard a National Aeronautics and Space Administration (NASA) test aircraft, and a complete series of shock and vibration tests. The functional qualification program centered on thermal-hydraulic system performance tests and a complete check-out of the unique telemetry system used to retrieve the experimental data from the payload. The test program also contains a number of acceptance and prelaunch validation tests to be performed as final verification of payloads readiness for spaceflight

Belief in complementary and alternative medicine is related to age and paranormal beliefs in adults.

Science.gov (United States)

Van den Bulck, Jan; Custers, Kathleen

2010-04-01

The use of complementary and alternative medicine (CAM) is widespread, even among people who use conventional medicine. Positive beliefs about CAM are common among physicians and medical students. Little is known about the beliefs regarding CAM among the general public. Among science students, belief in CAM was predicted by belief in the paranormal. In a cross-sectional study, 712 randomly selected adults (>18 years old) responded to the CAM Health Belief Questionnaire (CHBQ) and a paranormal beliefs scale. CAM beliefs were very prevalent in this sample of adult Flemish men and women. Zero-order correlations indicated that belief in CAM was associated with age (r = 0.173 P paranormal belief (r = 0.365 P paranormal. Paranormal beliefs accounted for 14% of the variance of the CAM beliefs (regression coefficient: 0.376; 95%: CI 0.30-0.44). The level of education (regression coefficient: 0.06; 95% CI: -0.014-0.129) and social desirability (regression coefficient: -0.023; 95% CI: -0.048-0.026) did not make a significant contribution to the explained variance (paranormal beliefs.

Qualification of NDT systems for in-service inspections of nuclear power plant pressure vessels

International Nuclear Information System (INIS)

Elfving, K.

1998-11-01

The goal of this study is to determine the requirements of the in-service inspection qualification in Europe, their feasibility in practice and to find out possible manufacture defects in test pieces used in practical trials. The literature study consists of qualification requirements set by European regulatory bodies and by the European nuclear power utilities. Also a brief summary of qualification requirements set by ASME Code, Section XI and comparison between ASME and European qualification requirements is included

Development of nuclear equipment qualification technology

Energy Technology Data Exchange (ETDEWEB)

Choi, Heon O; Kim, Wu Hyun; Kim, Jin Wuk; Kim, Jeong Hyun; Lee, Jeong Kyu; Kim, Yong Han; Jeong, Hang Keun [Korea Institute of Machinery and Materials, Taejon (Korea)

1999-03-01

In order to enhance testing and evaluation technologies, which is one of the main works of the Chanwon branch of KIMM(Korea Institute of Machinery and Materials), in addition to the present work scope of the testing and evaluation in the industrial facilities such as petroleum and chemical, plants, the qualification technologies of the equipments important to safety used in the key industrial facilities such as nuclear power plants should be localized: Equipments for testing and evaluation is to be set up and the related technologies must be developed. In the first year of this study, of vibration aging qualification technologies of equipments important to safety used in nuclear power plants have been performed. (author). 27 refs., 81 figs., 17 tabs.

Qualifications Frameworks and their conflicting social imaginaries of globalisation

DEFF Research Database (Denmark)

Sarauw, Laura Louise

2013-01-01

Critics of the European Bologna process often see it as a univocal standardization of higher education. By exploring how different qualifications frameworks currently project unlike imaginaries of and responses to globalisation, this article takes a different stance. As a key point, I argue...... that the well-known imaginary of globalisation as a change towards a more diverse and unforeseeable world, which calls for the development of flexible, lifelong learners with a broad knowledge base and strong democratic competencies that we find in the overarching qualifications framework of the Bologna process......, is a highly contested imaginary. In contrast, for example, the Danish qualifications framework of 2003 projects an imaginary of globalisation as a change towards a smaller and more predictable world, which enables a novel and more efficient alignment of the curriculum towards specific professional needs...

Belief Elicitation in Experiments

DEFF Research Database (Denmark)

Blanco, Mariana; Engelmann, Dirk; Koch, Alexander

Belief elicitation in economics experiments usually relies on paying subjects according to the accuracy of stated beliefs in addition to payments for other decisions. Such incentives, however, allow risk-averse subjects to hedge with their stated beliefs against adverse outcomes of other decisions......-belief elicitation treatment using a financial investment frame, where hedging arguably would be most natural....

The Incompatibility of Science and Religion: An Argument for Atheism

NARCIS (Netherlands)

Philipse, H.

2001-01-01

When science was in its infancy, it occasionally occurred that its claims were rejected from a religious point of view. Nowadays the credentials of science as a superior and dynamic method for the fixation of belief are beyond reasonable doubt.

47 CFR 25.140 - Qualifications of fixed-satellite space station licensees.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Qualifications of fixed-satellite space station licensees. 25.140 Section 25.140 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES SATELLITE COMMUNICATIONS Applications and Licenses Space Stations § 25.140 Qualifications...

Students' qualification in environmental and sustainability education—epistemic gaps or composites of critical thinking?

Science.gov (United States)

Hasslöf, Helen; Lundegård, Iann; Malmberg, Claes

2016-01-01

In an 'age of measurement' where students' qualification is a hot topic on the political agenda, it is of interest to ask what the function of qualification might implicate in relation to a complex issue as Education for Sustainable Development (ESD) and what function environmental and sustainability issues serve in science education. This paper deals with how secondary and upper secondary teachers in discussions with colleagues articulate qualification in relation to educational aims of ESD. With inspiration from discourse theory, the teachers' articulations of qualification are analysed and put in relation to other functions of education (qualification, socialisation and subjectification). The results of this study show three discourses of qualification: scientific reasoning, awareness of complexity and to be critical. The discourse of 'qualification as to be critical' is articulated as a composite of differing epistemological views. In this discourse, the teachers undulate between rationalistic epistemological views and postmodern views, in a pragmatic way, to articulate a discourse of critical thinking which serves as a reflecting tool to bring about different ways of valuing issues of sustainability, which reformulates 'matter of facts' towards 'matter of concerns'

Challenges of equipment qualification using today's standards with emphasis on a class 1E motor program

International Nuclear Information System (INIS)

Deaton, K.

1995-01-01

This paper describes qualification of new equipment for safety related service in the nuclear power industry in accordance with current industry standards. This topic is presented from the perspective of an original equipment manufacturer J(OEM). Equipment qualification is first discussed in a general way then an example is provided of an electric motor qualification. A review of alternative qualification methods including commercial dedication is included. Potential difficulties with alternative/expedited qualification methods are also discussed

Personnel Officers: Judging Their Qualifications.

Science.gov (United States)

Webb, Gisela

1988-01-01

Discusses the backgrounds and qualifications appropriate for a library personnel administrator, including (1) a master's degree in library science; (2) library work experience; (3) additional training in administration, personnel management, organizational development, and psychology; and (4) personal attributes such as good communication skills,…

Mutual Recogniton of Professional Qualifications

DEFF Research Database (Denmark)

Enemark, Stig; Plimmer, Francis

The publication aims to review the concept of mutual recognition of qualifications within the world wide surveying community, and to develop a framework for the introduction of standards of global professional competence in this area. The publication also includes a number of case studies from...

Qualification test on class 1E charger and inverter in nuclear power plant

International Nuclear Information System (INIS)

Li Mingcheng; Lin Jian; Fu Mingxing; Xu Benfu; Ma Peifeng

2014-01-01

The qualification approach for class lE electrical equipment was introduced, based on IEC, IEEE and RCC-E standards and technical documents. Combined with a lot of practical experience, the qualification scheme for class lE charger and inverter was developed. The component evaluation, performance and stress test, EMC test, seismic test and software qualification for the equipment were analyzed in detail. (authors)

Fatigue qualification of high thickness composite rotor components

Science.gov (United States)

Raggi, M.; Mariani, U.; Zaffaroni, G.

Fatigue qualification aspects of composite rotor components are presented according with the safe life procedure usually applied by helicopter manufacturers. Test activities are identified at three levels of specimen complexity: coupon, structural element and full scale component. Particular attention is given to high thickness laminates qualification as far as environmental exposure is concerned. A practical approach for an accelerated conditioning procedure is described. The application to a main rotor tension link is presented showing the negligible effect of the moisture absorption on its fatigue strength.

Earthquake experience and seismic qualification by indirect methods in nuclear installations

International Nuclear Information System (INIS)

2003-01-01

In recent years, many operational nuclear power plants around the world have conducted seismic re-evaluation programmes either as part of a review of seismic hazards or to comply with best international nuclear safety practices. In this connection, Member States have called on the IAEA to carry out several seismic review missions at their plants, primarily those of WWER and RBMK design. One of the critical safety issues that arose during these missions was that of seismic qualification (determination of fitness for service) of already installed plant distribution systems, equipment and components. The qualification of new components, equipment and distribution systems cannot be replicated for equipment that is already installed and operational in plants, as this process is neither feasible nor appropriate. For this reason, seismic safety experts have developed new procedures for the qualification of installed equipment: these procedures seek to demonstrate that installed equipment, through a process of comparison with new equipment, is apt for service. However, these procedures require large sets of criteria and qualification databases and call for the use of engineering judgement and experience, all of which open the door to wide margins of interpretation. In order to guarantee a sound technical basis for the qualification of in-plant equipment, currently applied to 70% to 80% of all plant equipment, the regulatory review of this type of qualification process calls for a detailed assessment of the technical procedures applied. Such an assessment is the first step towards eliminating the risk of large differences in qualification results between different plants, operators and countries, and guaranteeing the reliability of seismic re-evaluation programmes. Bearing this in mind, in 1999, the IAEA convened a seminar and technical meeting on seismic qualification under the auspices of the IAEA Technical Co-operation programme. Altogether 66 senior experts attended the

Sustained qualification process for full scope nuclear power plant simulators

International Nuclear Information System (INIS)

Pirson, J.; Stubbe, E.; Vanhoenacker, L.

1994-01-01

In the past decade, simulator training for all nuclear power plant operators has evolved into a vital requirement. To assure a correct training, the simulator qualification process is an important issue not only for the initial validation but also following major simulator updates, which are necessary during the lifetime of the simulator. In order to avoid degradation of the simulator validated software, the modifications have to be introduced according to a rigorous methodology and a practical requalification process has to be applied. Such methodology has to be enforced at every phase of the simulator construction or updating process from plant data package constitution, over simulator software development to simulator response qualification. The initial qualification and requalification process is based on the 3 levels identified by the ANSI/ANS 3-5 standard for steady-state, operational transients and accident conditions. For the initial certification of the full scope simulators in Belgium, a practical qualification methodology has been applied, which has been adapted into a set of non regression tests for the requalification after major simulator updates. (orig.) (4 refs., 3 figs.)

Qualification of RETRAN for simulator applications

International Nuclear Information System (INIS)

Harrison, J.F.

1988-01-01

The use of full-scope control room replica simulators increased substantially following the accident at Three Mile Island Unit 2. The technical capability required to represent severe events has been included, in varying degrees, in most simulators purchased since the TMI-2 accident. The ability of the instructor to create a large variety of combinations of malfunctions has also greatly expanded. The nuclear industry has developed a standard which establishes the minimum functional requirements for full-scope nuclear control room simulators used for operator training. This standard, ANSI/ANS-3.5, was first issued in 1981 and was reissued in 1985. A method for performing simulator qualification with best estimate analytical data has been proposed in EPRI NP-4243, Analytic Simulator Qualification Methodology. The idea presented there is to choose a set of transients which drive the simulator into all the system conditions (dynamic states) likely to be encountered during operator training. The key observable parameters for each state are compared to analyses performed with the best estimate analytical model The closeness of the comparison determines the fidelity of the simulator. The approach described in EPRI NP-4243 has been adapted for evaluating RETRAN's capability for use in simulator qualification. RETRAN analyses which compare the RETRAN results to plant or test facility data are evaluated with respect to the simulator test matrix documented in EPRI NP-4243

The status of temporomandibular and cervical spine education in credentialed orthopedic manual physical therapy fellowship programs: a comparison of didactic and clinical education exposure.

Science.gov (United States)

Shaffer, Stephen M; Brismée, Jean-Michel; Courtney, Carol A; Sizer, Phillip S

2015-02-01

The purpose of this investigation was to establish a baseline of physical therapist education on temporomandibular disorders (TMD)-related topics during credentialed orthopedic manual physical therapy fellowship training and compare it to cervical spine disorders education. An online survey was distributed electronically to each fellowship program credentialed by the American Physical Therapy Association (APTA) and recognized by the Academy of Orthopedic Manual Physical Therapists (AAOMPT). Data were analyzed to compare overall exposure to TMD educational content, including a direct comparison of TMD and cervical spine disorders education. The response rate was 79%. Thirteen programs (87%) reported providing both didactic and clinical training on both TMD and cervical spine disorders. Didactic education for cervical spine disorders ranged from 16-20 hours to over 25 hours, whereas TMD hours ranged from 0 to 6-10 hours. Clinical education for cervical spine disorders ranged from 11-15 hours to over 25 hours, whereas TMD hours ranged from 0 to 6-10 hours. The number of hours of exposure during didactic training and the number of patients exposed to during clinical training were significantly different when comparing TMD to cervical spine disorders exposure (P<0.0001). The data indicate a lack of uniformity between credentialed fellowship programs in orthopedic manual physical therapy with respect to the extent to which programs expose trainees to evaluation and management of TMD. There is consistency in that all programs provided more training on cervical spine disorders than TMD. Despite a high level of clinical specialization, fellows-in-training receive minimal TMD education.

The Changing Distribution of Teacher Qualifications Across Schools: A Statewide Perspective Post-NCLB

Directory of Open Access Journals (Sweden)

Karen J. DeAngelis

2010-11-01

Full Text Available A number of recent policy initiatives, including NCLB's highly qualified teacher provisions, have sought to improve the qualifications of teachers and their distribution across schools. Little is known, however, about the impact of these policies. In this study, we use population data on teachers and schools in Illinois to examine changes in the level and distribution of teacher qualifications from 2001 to 2006. We find that schools in Chicago, especially those serving the highest percentages of low-income and minority students, experienced the greatest improvements in teacher qualifications during the period. In addition, high-poverty schools in most other locales in the state registered small to moderate improvements, which narrowed the gap in teacher qualifications between high- and low-poverty schools across Illinois. Improvements in the certification status of experienced teachers and the recruitment of new teachers with stronger academic qualifications both contributed to these gains. The results reveal a tradeoff for disadvantaged schools seeking to improve both teacher qualifications and teacher experience levels, thereby calling into question the near-term feasibility of NCLB provisions that aim to simultaneously eliminate inequities across schools in both.       

7 CFR 4290.360 - Initial review of Applicant's management team's qualifications.

Science.gov (United States)

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false Initial review of Applicant's management team's...'s management team's qualifications. The Secretary will review the information submitted by the Applicant concerning the qualifications of the Applicant's management team to determine in his or her sole...

Qualification criteria to certify a package for air transport of plutonium

International Nuclear Information System (INIS)

1977-12-01

The document describes qualification criteria developed by the U.S. Nuclear Regulatory Commission to certify a package for air transport of plutonium. Included in the document is a discussion of aircraft accident conditions and a summary of the technical basis for the qualification criteria. The criteria require prototype packages to be subjected to various individual and sequential tests that simulate the conditions produced in severe aircraft accidents. Specific post-test acceptance standards are prescribed for each of the three safety functions of a package. The qualification criteria also prescribe certain operational controls to be exercised during transport

Extreme Overvalued Beliefs: How Violent Extremist Beliefs Become "Normalized".

Science.gov (United States)

Rahman, Tahir

2018-01-12

Extreme overvalued beliefs (EOB) are rigidly held, non-deusional beliefs that are the motive behind most acts of terrorism and mass shootings. EOBs are differentiated from delusions and obsessions. The concept of an overvalued idea was first described by Wernicke and later applied to terrorism by McHugh. Our group of forensic psychiatrists (Rahman, Resnick, Harry) refined the definition as an aid in the differential diagnosis seen in acts of violence. The form and content of EOBs is discussed as well as group effects, conformity, and obedience to authority. Religious cults such as The People's Temple, Heaven's Gate, Aum Shinrikyo, and Islamic State (ISIS) and conspiracy beliefs such as assassinations, moon-hoax, and vaccine-induced autism beliefs are discussed using this construct. Finally, some concluding thoughts on countering violent extremism, including its online presence is discussed utilizing information learned from online eating disorders and consumer experience.

Qualification and certification in NDT

International Nuclear Information System (INIS)

Hassan Kavarodi Maracair

2003-01-01

Ruane-TATI Sdn Bhd was the first accredited training centre in Asia approved by The British Institute of Non Destructive Testing (BINDT) as per EN 473, ISO 9712 and EN 45013 requirements. Meanwhile, Ruane-TATI is also accredited by National Vocational Training Center ( MLVK ).This mean that Ruane-TATI is the first training and examination center that accredited by both international and national bodies in providing quality , qualification and certification for comprehensive training and examination in Inspection and Non Destructive Testing (NDT). There are several NDT examinations scheme available in Malaysia due to differences requirement from the industrials. This has put the difficulties to services company in upgrading their NDT technician qualifications. The intention of this paper is to discuss the basic different among the NDT examinations scheme used in Malaysia ( mostly offered by Ruane-TATI ) and the development of certain schemes in covering their schemes to more sectors and NDT methods. (Author)

Novel qualification methodology for subsea processing

Energy Technology Data Exchange (ETDEWEB)

Nilsen, Paal Jahre; Bratfos, Hans A. [Det Norske Veritas, Oslo (Norway)

2004-07-01

The purpose of the Reliability Analysis is to quantify the overall reliability of the technology to confirm that the functional requirements and the target reliability laid down in the Qualification Basis are met. On this basis DNV may issue a Statement of Fitness for Service affirming that the technology is considered qualified. Although a technology may be convincingly proven fit for service without using reliability measures, a quantified reliability makes the technology more competitive in a business where profitability is directly related to the reliability of the technology. In this respect it should also be noted that a reliability analysis require specific input data that sometimes must be derived by testing. It is therefore important to take this into consideration already in the selection and planning of qualification methods. (author)

Chapter 9. Personnel qualification and training

International Nuclear Information System (INIS)

2001-01-01

The overall training system and the development of projects for training of all categories of NPP V-1, NPP V-2 Bohunice, SE-VYZ and NPP Mochovce staff were the subject of Nuclear Regulatory Authority of the Slovak Republic (UJD) attention. During 2000, the following inspections were carried out on nuclear personnel training: (a) NPP Bohunice: an inspection focused on compliance with requirements for staff qualifications and compliance with the prescribed training of Bohunice plant staff ; (b) NPP Mochovce: an inspection focused on compliance with the requirements for staff qualifications and compliance with the prescribed training of NPP Mochovce staff; an inspection focused on verifying the simulator aided training; an inspection focused on checking the preparedness of NPP Mochovce operation and technical personnel for NPP Mochovce Unit 2 operation; (c) Technology for treatment and conditioning of radioactive waste Bohunice (BSC): an inspection focused on compliance with the requirements for staff qualifications and compliance with the prescribed training of SE-VYZ staff; VUJE Trnava: verification of technical equipment and professional skills of VUJE Trnava staff and tasks arising out of the 'Authorisation on nuclear installation staff training'. Examinations of selected personnel were scheduled according to the plan of examining committee meetings. For each examined person written tests are generated by the computer from the database of test questions at the Training Centre of VUJE Trnava for individual positions - categories of selected staff of NPP V-1 and NPP V-2 Bohunice and NPP Mochovce so that the examination questions both in written and oral part equally cover individual facilities and regimes of operation of NPP. The database is continuously updated, thereby containing new questions resulting from the recent changes carried out at NPPs. A part of the examination in case of promotion to a higher position is the practical part, which is conducted under

Data Qualification guidelines

International Nuclear Information System (INIS)

Edwards, T.B.; Shine, E.P.

1992-01-01

Data Qualification (DQ) is a formal, technical process whose objective is to affirm that experimental data are suitable for their intended use. Although it is not possible to develop a fixed recipe for the DQ process to cover all test situations, these general guidelines have been developed for the Nuclear Engineering Section to establish a framework for qualifying data from steady-state processing. These guidelines outline the role of the DQ team providing insight into the planning and conducting of the DQ process

Nuclear power reactor security personnel training and qualification plan reviewer workbook

International Nuclear Information System (INIS)

1979-06-01

The Training and Qualification Plan Reviewer Workbook has been developed to provide the information required for evaluating the adequacy of the Training and Qualification (T and Q) Plans developed to meet the requirements of 10 CFR 73.55(b)(4) and 10 CFR 73, Appendix B

Recent developments in methodology for dynamic qualification of nuclear plant equipment

International Nuclear Information System (INIS)

Kana, D.D.; Pomerening, D.J.

1984-01-01

Dynamic qualification of nuclear plant electrical and mechanical equipment is performed basically under guidelines given in IEEE Standards 323 and 344, and a variety of NRC regulatory guides. Over the last fifteen years qualification methodology prescribed by these documents has changed significantly as interpretations, equipment capability, and imagination of the qualification engineers have progressed. This progress has been sparked by concurrent NRC and industry sponsored research programs that have identified anomalies and developed new methodologies for resolving them. Revisions of the standards have only resulted after a lengthy debate of all such new information and subsequent judgment of its validity. The purpose of this paper is to review a variety of procedural improvements and developments in qualification methodology that are under current consideration as revisions to the standards. Many of the improvements and developments have resulted from recent research programs. All are very likely to appear in one type of standard or another in the near future

Seismic and dynamic qualification methods

International Nuclear Information System (INIS)

Lin, C.W.

1985-01-01

This book presents the papers given at a conference on seismic effects on nuclear power plants. Topics considered at the conference included seismic qualification of equipment, multifrequency test methodologies, damping in piping systems, the amplification factor, thermal insulation, welded joints, and response factors for seismic risk analysis of piping

Posttraumatic Maladaptive Beliefs Scale: Evolution of the Personal Beliefs and Reactions Scale

Science.gov (United States)

Vogt, Dawne S.; Shipherd, Jillian C.; Resick, Patricia A.

2012-01-01

The Posttraumatic Maladaptive Beliefs Scale (PMBS) was developed to measure maladaptive beliefs about current life circumstances that may occur following trauma exposure. This scale assesses maladaptive beliefs within three domains: (a) Threat of Harm, (b) Self-Worth and Judgment, and (c) Reliability and Trustworthiness of Others. Items for the…

Conditional Belief Types

Science.gov (United States)

2016-04-19

Rationality of a player is determined by comparing her actual expected payoff to her expected payoff when her strategy is changed , while her beliefs —and...reduced strategies, and it is possible that under such conditions, beliefs about other players’ reduced strategies change as well. Thus, independence...assumptions, whether they concern observability of moves or subjective beliefs of any other kind, can be all accommodated by changing the informational

Nuclear power plants. Electrical equipment of the safety system. Qualification

International Nuclear Information System (INIS)

2001-01-01

This International Standard applies to electrical parts of safety systems employed at nuclear power plants, including components and equipment of any interface whose failure could affect unfavourably properties of the safety system. The standard also applies to non-electrical safety-related interfaces. Furthermore, the standard describes the generic process of qualification certification procedures and methods of qualification testing and related documentation. (P.A.)

46 CFR 68.7 - Qualification as an 883-1 corporation.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Qualification as an 883-1 corporation. 68.7 Section 68.7... Trade § 68.7 Qualification as an 883-1 corporation. (a) To be formally qualified as an 883-1 corporation for all purposes under the Act, a corporation which meets the requirements of § 68.5 must file with...

Current activities and challenges of the European network for inspection and qualification (ENIQ)

Energy Technology Data Exchange (ETDEWEB)

Martin, Oliver [European Commission, Joint Research Centre (JRC), Petten (Netherlands). Institute for Energy and Transport (IET); Martin, Etienne [EDF, St Denis (France). Direction Production Ingenierie; Booler, Russ [AMEC Clean Energy Europe, Warrington (United Kingdom); Zetterwall, Tommy [Swedish Qualification Centre, Taeby (Sweden); Walker, Tony [Rolls-Royce Submarines, Derby (United Kingdom)

2014-10-15

This article describes the development of the European Network for Inspection and Qualification (ENIQ) since the previous presentation of the network in the 2011 April/May edition of this journal, covering mainly the new technical challenges facing the network and resulting projects as well as the establishment of the new Task Group for Inspection Qualification Bodies. ENIQ is a utility-driven network dealing with the reliability and effectiveness of non-destructive testing (NDT) for nuclear power plants (NPP). ENIQ is recognised as one of the main contributors to today's global qualification codes and guidelines for in-service inspection (ISI) and has published nearly 50 documents. Among them are the 'European Methodology for Qualification of Non-Destructive Testing', the first qualification methodology based on technical justifications, the 'European Framework Document for Risk-Informed In-Service Inspection (RI-ISI)', and various recommend practices. In addition ENIQ has carried out two pilot studies and a number of surveys. In 2012, ENIQ joined the European based R and D association on Gen II and III reactors, NUGENIA, making ENIQ its 8{sup th} technical area. Following the entry into NUGENIA, ENIQ members have updated the ENIQ roadmap and included a number of new technical challenges facing its members in the near future. Also ENIQ established a third task group in 2013, the Task Group for Inspection Qualification Bodies (TGIQB), which should serve as an exchange forum for inspection qualification bodies. ENIQ is currently preparing or performing new projects and studies to tackle these challenges and new recommended practices and reports are likely to evolve from these projects, which will enable ENIQ to maintain its role as one of the main contributors to today's global qualification codes and guidelines for ISI.

Current activities and challenges of the European network for inspection and qualification (ENIQ)

International Nuclear Information System (INIS)

Martin, Oliver; Martin, Etienne; Zetterwall, Tommy; Walker, Tony

2014-01-01

This article describes the development of the European Network for Inspection and Qualification (ENIQ) since the previous presentation of the network in the 2011 April/May edition of this journal, covering mainly the new technical challenges facing the network and resulting projects as well as the establishment of the new Task Group for Inspection Qualification Bodies. ENIQ is a utility-driven network dealing with the reliability and effectiveness of non-destructive testing (NDT) for nuclear power plants (NPP). ENIQ is recognised as one of the main contributors to today's global qualification codes and guidelines for in-service inspection (ISI) and has published nearly 50 documents. Among them are the 'European Methodology for Qualification of Non-Destructive Testing', the first qualification methodology based on technical justifications, the 'European Framework Document for Risk-Informed In-Service Inspection (RI-ISI)', and various recommend practices. In addition ENIQ has carried out two pilot studies and a number of surveys. In 2012, ENIQ joined the European based R and D association on Gen II and III reactors, NUGENIA, making ENIQ its 8 th technical area. Following the entry into NUGENIA, ENIQ members have updated the ENIQ roadmap and included a number of new technical challenges facing its members in the near future. Also ENIQ established a third task group in 2013, the Task Group for Inspection Qualification Bodies (TGIQB), which should serve as an exchange forum for inspection qualification bodies. ENIQ is currently preparing or performing new projects and studies to tackle these challenges and new recommended practices and reports are likely to evolve from these projects, which will enable ENIQ to maintain its role as one of the main contributors to today's global qualification codes and guidelines for ISI.

Software qualification in safety applications

International Nuclear Information System (INIS)

Lawrence, J.D.

2000-01-01

The developers of safety-critical instrumentation and control systems must qualify the design of the components used, including the software in the embedded computer systems, in order to ensure that the component can be trusted to perform its safety function under the full range of operating conditions. There are well known ways to qualify analog systems using the facts that: (1) they are built from standard modules with known properties; (2) design documents are available and described in a well understood language; (3) the performance of the component is constrained by physics; and (4) physics models exist to predict the performance. These properties are not generally available for qualifying software, and one must fall back on extensive testing and qualification of the design process. Neither of these is completely satisfactory. The research reported here is exploring an alternative approach that is intended to permit qualification for an important subset of instrumentation software. The research goal is to determine if a combination of static analysis and limited testing can be used to qualify a class of simple, but practical, computer-based instrumentation components for safety application. These components are of roughly the complexity of a motion detector alarm controller. This goal is accomplished by identifying design constraints that enable meaningful analysis and testing. Once such design constraints are identified, digital systems can be designed to allow for analysis and testing, or existing systems may be tested for conformance to the design constraints as a first step in a qualification process. This will considerably reduce the cost and monetary risk involved in qualifying commercial components for safety-critical service

High Temperature Materials Interim Data Qualification Report

International Nuclear Information System (INIS)

Lybeck, Nancy

2010-01-01

Projects for the very high temperature reactor (VHTR) Technology Development Office provide data in support of Nuclear Regulatory Commission licensing of the VHTR. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high temperature and high fluence environments. The VHTR program has established the NGNP Data Management and Analysis System (NDMAS) to ensure that VHTR data are qualified for use, stored in a readily accessible electronic form, and analyzed to extract useful results. This document focuses on the first NDMAS objective. It describes the High Temperature Materials characterization data stream, the processing of these data within NDMAS, and reports the interim FY2010 qualification status of the data. Data qualification activities within NDMAS for specific types of data are determined by the data qualification category assigned by the data generator. The High Temperature Materials data are being collected under NQA-1 guidelines, and will be qualified data. For NQA-1 qualified data, the qualification activities include: (1) capture testing, to confirm that the data stored within NDMAS are identical to the raw data supplied, (2) accuracy testing to confirm that the data are an accurate representation of the system or object being measured, and (3) documenting that the data were collected under an NQA-1 or equivalent Quality Assurance program. Currently, data from two test series within the High Temperature Materials data stream have been entered into the NDMAS vault: (1) Tensile Tests for Sm (i.e., Allowable Stress) Confirmatory Testing - 1,403,994 records have been inserted into the NDMAS database. Capture testing is in process. (2) Creep-Fatigue Testing to Support Determination of Creep-Fatigue Interaction Diagram - 918,854 records have been processed and inserted into the NDMAS database. Capture testing is in process.

Chapter No.8. Personnel qualification and training

International Nuclear Information System (INIS)

2002-01-01

The overall training system and the development projects of training the staff of all categories from NPP V-1, NPP V-2 Bohunice, SE-VYZ and NPP Mochovce were the subject of UJD's attention. During 2001 following inspections were carried out on nuclear personnel training: - PP's Bohunice: an inspection focused on compliance with requirements for staff qualifications and compliance with the prescribed training of Bohunice plant staff; - Mochovce NPP: an inspection focused on compliance with the requirements for staff qualifications and compliance with the prescribed training of NPP Mochovce staff; - SE-VYZ: an inspection focused on compliance with the requirements for staff qualifications and compliance with the prescribed training of SE-VYZ staff. Training the staff of the NPP's Bohunice: - The fundamental and periodical theoretical training as sure as the fundamental and periodical simulator training is carried out by the VUJE Training centre in Trnava. - The fundamental practical training in the workplace and training for the change work- rank is carried at Bohunice plant. Training of the staff of the NPP Mochovce: - The fundamental and periodical theoretical training is carried out by the VUJE Training centre in Trnava. The fundamental practical training in the workplace and training for the change work- rank as well as the fundamental and periodical simulator training is carried at Mochovce plant. Based on a successful passing of examination before the examining committee, UJD issues a certificate on special professional skills of selected staff members of nuclear installations for specific activity for the given type of nuclear installation and for the following positions: 1. Scientific shift manager for start up with the right of manipulation; 2. Shift supervisor; 3. Unit supervisor; 4. Primary circuit operator; 5. Secondary circuit operator; 6. Reactor physicist; 7. Scientific shift manager for start up without the right of manipulation. Examinations of

Qualification of nuclear power plant operations personnel

International Nuclear Information System (INIS)

1984-01-01

With the ultimate aim of reducing the possibility of human error in nuclear power plant operations, the Guidebook discusses the organizational aspects, the staffing requirements, the educational systems and qualifications, the competence requirements, the ways to establish, preserve and verify competence, the specific aspects of personnel management and training for nuclear power plant operations, and finally the particular situations and difficulties to be overcome by utilities starting their first nuclear power plant. An important aspect presented in the Guidebook is the experience in training and qualification of nuclear power plant personnel in various countries: Argentina, Belgium, Canada, Czechoslovakia, France, Federal Republic of Germany, Spain, Sweden, United Kingdom and United States of America

An analysis of the qualification criteria for small radioactive material shipping packages

International Nuclear Information System (INIS)

McClure, J.D.

1983-05-01

The RAM package design certification process has two important elements, testing and acceptance. These terms sound very similar but they have specific meanings. Qualification testing in the context of this study is the imposition of simulated accident test conditions upon the candidate package design. (Normal transportation environments may also be included.) Following qualification testing, the acceptance criteria provide the performance levels which, if demonstrated, indicate the ability of the RAM package to sustain the severity of the qualification testing sequence and yet maintain specified levels of package integrity. This study has used Severities of Transportation Accidents as a data base to examine the regulatory test criteria which are required to be met by small packages containing Type B quantities of radioactive material (RAM). The basic findings indicate that the present regulatory test standards provide significantly higher levels of protection for the surface transportation modes (truck, rail) than for RAM packages shipped by aircraft. It should also be noted that various risk assessment studies have shown that the risk to the public due to severe transport accidents by surface and air transport modes is very low. A key element in this study was the quantification of the severity of the transportation accident environment and the severity of the present qualification test standards (called qualification test standards in this document) so that a direct comparison could be made between them to assess the effectiveness of the existing qualification test standards. The manner in which this was accomplished is described

An analysis of the qualification criteria for small radioactive material shipping packages

Energy Technology Data Exchange (ETDEWEB)

McClure, J.D.

1983-05-01

The RAM package design certification process has two important elements, testing and acceptance. These terms sound very similar but they have specific meanings. Qualification testing in the context of this study is the imposition of simulated accident test conditions upon the candidate package design. (Normal transportation environments may also be included.) Following qualification testing, the acceptance criteria provide the performance levels which, if demonstrated, indicate the ability of the RAM package to sustain the severity of the qualification testing sequence and yet maintain specified levels of package integrity. This study has used Severities of Transportation Accidents as a data base to examine the regulatory test criteria which are required to be met by small packages containing Type B quantities of radioactive material (RAM). The basic findings indicate that the present regulatory test standards provide significantly higher levels of protection for the surface transportation modes (truck, rail) than for RAM packages shipped by aircraft. It should also be noted that various risk assessment studies have shown that the risk to the public due to severe transport accidents by surface and air transport modes is very low. A key element in this study was the quantification of the severity of the transportation accident environment and the severity of the present qualification test standards (called qualification test standards in this document) so that a direct comparison could be made between them to assess the effectiveness of the existing qualification test standards. The manner in which this was accomplished is described.

77 FR 59339 - Contractor Qualifications

Science.gov (United States)

2012-09-27

... DEPARTMENT OF DEFENSE Defense Acquisition Regulations System 48 CFR Part 209 Contractor Qualifications CFR Correction In Title 48 of the Code of Federal Regulations, Chapter 2 (Parts 201-299), revised as of October 1, 2011, on page 55, in section 209.104-70, paragraph (a) is amended by revising the...

The qualification of electrical components and instrumentations relevant to safety

International Nuclear Information System (INIS)

Zambardi, F.

1989-03-01

Systems and components relevant to safety of nuclear power plants must maintain their functional integrity in order to assure accident prevention and mitigation. Redundancy is utilized against random failures, nevertheless care must be taken to avoid common failures in redundant components. Main sources of degradation and common cause failures consist in the aging effects and in the changes of environmental conditions which occur during the plant life and the postulated accidents. These causes of degradation are expected to be especially significant for instrumentation and electrical equipment, which can have a primary role in safety systems. The qualification is the methodology by which component safety requirements can be met against the above mentioned causes of degradation. In this report the connection between the possible, plant conditions and the resulting degradation effects on components is preliminarily addressed. A general characterization of the qualification is then presented. Basis, methods and peculiar aspects are discussed and the qualification by testing is taken into special account. Technical and organizational aspects related to a plant qualification program are also focused. The report ends with a look to the most significant research and development activities. (author)

Biomarkers as drug development tools: discovery, validation, qualification and use.

Science.gov (United States)

Kraus, Virginia B

2018-06-01

The 21st Century Cures Act, approved in the USA in December 2016, has encouraged the establishment of the national Precision Medicine Initiative and the augmentation of efforts to address disease prevention, diagnosis and treatment on the basis of a molecular understanding of disease. The Act adopts into law the formal process, developed by the FDA, of qualification of drug development tools, including biomarkers and clinical outcome assessments, to increase the efficiency of clinical trials and encourage an era of molecular medicine. The FDA and European Medicines Agency (EMA) have developed similar processes for the qualification of biomarkers intended for use as companion diagnostics or for development and regulatory approval of a drug or therapeutic. Biomarkers that are used exclusively for the diagnosis, monitoring or stratification of patients in clinical trials are not subject to regulatory approval, although their qualification can facilitate the conduct of a trial. In this Review, the salient features of biomarker discovery, analytical validation, clinical qualification and utilization are described in order to provide an understanding of the process of biomarker development and, through this understanding, convey an appreciation of their potential advantages and limitations.

Challenges of equipment qualification using today`s standards with emphasis on a class 1E motor program

Energy Technology Data Exchange (ETDEWEB)

Deaton, K.

1995-02-01

This paper describes qualification of new equipment for safety related service in the nuclear power industry in accordance with current industry standards. This topic is presented from the perspective of an original equipment manufacturer J(OEM). Equipment qualification is first discussed in a general way then an example is provided of an electric motor qualification. A review of alternative qualification methods including commercial dedication is included. Potential difficulties with alternative/expedited qualification methods are also discussed.

The new lattice code Paragon and its qualification for PWR core applications

International Nuclear Information System (INIS)

Ouisloumen, M.; Huria, H.C.; Mayhue, L.T.; Smith, R.M.; Kichty, M.J.; Matsumoto, H.; Tahara, Y.

2003-01-01

Paragon is a new two-dimensional transport code based on collision probability with interface current method and written entirely in Fortran 90/95. The qualification of Paragon has been completed and the results are very good. This qualification included a number of critical experiments. Comparisons to the Monte Carlo code MCNP for a wide variety of PWR assembly lattice types were also performed. In addition, Paragon-based core simulator models have been compared against PWR plant startup and operational data for a large number of plants. Some results of these calculations and also comparisons against models developed with a licensed Westinghouse lattice code, Phoenix-P, are presented. The qualification described in this paper provided the basis for the qualification of Paragon both as a validated transport code and as the nuclear data source for core simulator codes

1E Qualification of Electrical Equipment - Requirement for Safety Nuclear Power Plants

International Nuclear Information System (INIS)

Geambasu, C.; Segarceanu, D.; Albu, J.

2002-01-01

The paper presents the qualification methods of the safety related equipment according to the safety class 1E. There are presented the qualification principles, procedure and documents, emphasis being laid on the qualification approach by type tests. This approach assumes the equipment test under both normal and accident conditions (design basis events) simulating the operational conditions and covers the largest part of electrical equipment from a nuclear power plant.The safety related equipment is to be qualified is subjected to a sequential test that will be detailed in the paper. (author)

Rover Low Gain Antenna Qualification for Deep Space Thermal Environments

Science.gov (United States)

Ramesham, Rajeshuni; Amaro, Luis R.; Brown, Paula R.; Usiskin, Robert; Prater, Jack L.

2013-01-01

A method to qualify the Rover Low Gain Antenna (RLGA) for use during the Mars Science Laboratory (MSL) mission has been devised. The RLGA antenna must survive all ground operations, plus the nominal 670 Martian sol mission that includes the summer and winter seasons of the Mars thermal environment. This qualification effort was performed to verify that the RLGA design, its bonding, and packaging processes are adequate. The qualification test was designed to demonstrate a survival life of three times more than all expected ground testing, plus a nominal 670 Martian sol missions. Baseline RF tests and a visual inspection were performed on the RLGA hardware before the start of the qualification test. Functional intermittent RF tests were performed during thermal chamber breaks over the course of the complete qualification test. For the return loss measurements, the RLGA antenna was moved to a test area. A vector network analyzer was calibrated over the operational frequency range of the antenna. For the RLGA, a simple return loss measurement was performed. A total of 2,010 (3 670 or 3 times mission thermal cycles) thermal cycles was performed. Visual inspection of the RLGA hardware did not show any anomalies due to the thermal cycling. The return loss measurement results of the RLGA antenna after the PQV (Package Qualification and Verification) test did not show any anomalies. The antenna pattern data taken before and after the PQV test at the uplink and downlink frequencies were unchanged. Therefore, the developed design of RLGA is qualified for a long-duration MSL mission.

Leaving school without qualifications and mental health problems to age 30.

Science.gov (United States)

Fergusson, David M; McLeod, Geraldine F H; Horwood, L John

2015-03-01

To examine the associations between leaving school without qualifications and subsequent mental health to age 30, using data gathered over the course of a 30-year longitudinal study. Data were gathered over the course of a 30-year study (Christchurch Health and Development Study) of a birth cohort of 1265 children, born in Christchurch in 1977. This cohort has been studied on 22 occasions from birth to age 30. As part of this study, information was gathered on: (a) school leaving qualifications, (b) mental health problems from 18 to 30; and (c) prospectively assessed childhood and adolescent factors including: child and family background; family violence and child abuse; and adolescent mental health problems. Leaving school without qualifications was associated with increased risks of subsequent: major depression (OR = 1.37 at 95 % CI 1.05-1.78, p = 0.019); anxiety disorder (OR = 1.99 at 95 % CI 1.55-2.57, p mental health problems) reduced these associations substantially and to the point of statistical non-significance. The findings of this study suggest that there was no direct causal association between leaving school without qualifications and subsequent mental health problems. Associations were explained by the linkages between leaving school without qualifications and: child and family social background; and mental health around the point of school leaving.

Forced Attention to Specific Applicant Qualifications: Impact on Physical Attractiveness and Sex of Applicant Biases.

Science.gov (United States)

Cann, Arnie; And Others

1981-01-01

Undergraduates evaluated the qualifications of an attractive, average, or unattractive male or female applicant. Ratings of specific qualifications preceded or followed an overall and hiring decision rating. The order variable influenced ratings of specific qualifications but not the overall or hiring decision. Male and attractive applicants were…

IAEA activities on NPP personnel training and qualification

International Nuclear Information System (INIS)

Kossilov, A.

1998-01-01

Activities of IAEA concerning training and qualification of NPP personnel consider the availability of sufficient number of competent personnel which is one of the most critical requirements for safe and reliable NPP operation and maintenance. Competence of personnel is essential for reducing the frequency of events connected to human errors and equipment failures. The IAEA Guidebook on Nuclear Power Plant Personnel Training and its Evaluation incorporates the experience gained worldwide and provides recommendations on the use of SAT being the best practice for attaining and maintaining the qualification and competence of NPP personnel and for quality assurance of training

Qualification Procedures of the CMS Pixel Barrel Modules

CERN Document Server

Starodumov, A; Horisberger, R.; Kastli, H.Chr.; Kotlinski, D.; Langenegger, U.; Meier, B.; Rohe, T.; Trueb, P.

2006-01-01

The CMS pixel barrel system will consist of three layers built of about 800 modules. One module contains 66560 readout channels and the full pixel barrel system about 48 million channels. It is mandatory to test each channel for functionality, noise level, trimming mechanism, and bump bonding quality. Different methods to determine the bump bonding yield with electrical measurements have been developed. Measurements of several operational parameters are also included in the qualification procedure. Among them are pixel noise, gains and pedestals. Test and qualification procedures of the pixel barrel modules are described and some results are presented.

Qualification and testing of CT systems

DEFF Research Database (Denmark)

Bartscher, Markus; Neuschaefer-Rube, Ulrich; Illemann, Jens

2018-01-01

This chapter focuses on system verification and conformance to specifications. System qualification is carried out to ensure that the system and itscomponents achieve the best performance—usually corresponding to the specificationsmade by the manufacturer. Acceptance and reverification testing ar...

15 CFR 40.2 - Qualifications.

Science.gov (United States)

2010-01-01

... Qualifications. (a) To be eligible for a training grant at the Bureau of the Census the applicant must be: (1) A... training programs. (2) Able to speak, read, write, and understand the English language. (3) Sponsored by his government either directly with the United States or through a public international agency. (4...

Evaluation and qualification of novel control techniques with safety requirements

International Nuclear Information System (INIS)

Gossner, S.; Wach, D.

1985-01-01

The paper discusses the questions related to the assessment and qualification of new I and C-systems. The tasks of nuclear power plant I and Cs as well as the efficiency of the new techniques are reflected. Problems with application of new I and Cs and the state of application in Germany and abroad are addressed. Starting from the essential differencies between conventional and new I and C-systems it is evaluated, if and in which way existing safety requirements can be met and to what extent new requirements need to be formulated. An overall concept has to be developed comprising the definition of graded requirement profiles for design and qualification. Associated qualification procedures and tools have to be adapted, developed and tuned upon each other. (orig./HP) [de

Qualification of conditioning process

International Nuclear Information System (INIS)

Wolf, J.

1989-01-01

A conditioning process is qualified by the PTB if the execution of pre-treatment and conditioning occurs so that a safe and orderly final storage of the products and waste containers produced can be assumed. All the relevant operating conditions for the plant are laid down by the producer/conditioner of the waste in a handbook. The elements of product inspection by process qualification are shown in tabular form. (DG) [de

Belief Change in Reasoning Agents

OpenAIRE

Jin, Yi

2007-01-01

The capability of changing beliefs upon new information in a rational and efficient way is crucial for an intelligent agent. Belief change therefore is one of the central research fields in Artificial Intelligence (AI) for over two decades. In the AI literature, two different kinds of belief change operations have been intensively investigated: belief update, which deal with situations where the new information describes changes of the world; and belief revision, which assumes the world is st...

Visas and qualifications: Syrian refugees in Brazil

Directory of Open Access Journals (Sweden)

Gilberto M A Rodrigues

2017-10-01

Full Text Available Brazil’s humanitarian visa programme for Syrian refugees and its efforts to recognise their qualifications could offer lessons for refugee protection and integration across the region.

Technical basis for environmental qualification of computer-based safety systems in nuclear power plants

International Nuclear Information System (INIS)

Korsah, K.; Wood, R.T.; Tanaka, T.J.; Antonescu, C.E.

1997-01-01

This paper summarizes the results of research sponsored by the US Nuclear Regulatory Commission (NRC) to provide the technical basis for environmental qualification of computer-based safety equipment in nuclear power plants. This research was conducted by the Oak Ridge National Laboratory (ORNL) and Sandia National Laboratories (SNL). ORNL investigated potential failure modes and vulnerabilities of microprocessor-based technologies to environmental stressors, including electromagnetic/radio-frequency interference, temperature, humidity, and smoke exposure. An experimental digital safety channel (EDSC) was constructed for the tests. SNL performed smoke exposure tests on digital components and circuit boards to determine failure mechanisms and the effect of different packaging techniques on smoke susceptibility. These studies are expected to provide recommendations for environmental qualification of digital safety systems by addressing the following: (1) adequacy of the present preferred test methods for qualification of digital I and C systems; (2) preferred standards; (3) recommended stressors to be included in the qualification process during type testing; (4) resolution of need for accelerated aging in qualification testing for equipment that is to be located in mild environments; and (5) determination of an appropriate approach to address smoke in a qualification program

Illness causal beliefs in Turkish immigrants

Directory of Open Access Journals (Sweden)

Klimidis Steven

2007-07-01

Full Text Available Abstract Background People hold a wide variety of beliefs concerning the causes of illness. Such beliefs vary across cultures and, among immigrants, may be influenced by many factors, including level of acculturation, gender, level of education, and experience of illness and treatment. This study examines illness causal beliefs in Turkish-immigrants in Australia. Methods Causal beliefs about somatic and mental illness were examined in a sample of 444 members of the Turkish population of Melbourne. The socio-demographic characteristics of the sample were broadly similar to those of the Melbourne Turkish community. Five issues were examined: the structure of causal beliefs; the relative frequency of natural, supernatural and metaphysical beliefs; ascription of somatic, mental, or both somatic and mental conditions to the various causes; the correlations of belief types with socio-demographic, modernizing and acculturation variables; and the relationship between causal beliefs and current illness. Results Principal components analysis revealed two broad factors, accounting for 58 percent of the variation in scores on illness belief scales, distinctly interpretable as natural and supernatural beliefs. Second, beliefs in natural causes were more frequent than beliefs in supernatural causes. Third, some causal beliefs were commonly linked to both somatic and mental conditions while others were regarded as more specific to either somatic or mental disorders. Last, there was a range of correlations between endorsement of belief types and factors defining heterogeneity within the community, including with demographic factors, indicators of modernizing and acculturative processes, and the current presence of illness. Conclusion Results supported the classification of causal beliefs proposed by Murdock, Wilson & Frederick, with a division into natural and supernatural causes. While belief in natural causes is more common, belief in supernatural causes

Illness causal beliefs in Turkish immigrants.

Science.gov (United States)

Minas, Harry; Klimidis, Steven; Tuncer, Can

2007-07-24

People hold a wide variety of beliefs concerning the causes of illness. Such beliefs vary across cultures and, among immigrants, may be influenced by many factors, including level of acculturation, gender, level of education, and experience of illness and treatment. This study examines illness causal beliefs in Turkish-immigrants in Australia. Causal beliefs about somatic and mental illness were examined in a sample of 444 members of the Turkish population of Melbourne. The socio-demographic characteristics of the sample were broadly similar to those of the Melbourne Turkish community. Five issues were examined: the structure of causal beliefs; the relative frequency of natural, supernatural and metaphysical beliefs; ascription of somatic, mental, or both somatic and mental conditions to the various causes; the correlations of belief types with socio-demographic, modernizing and acculturation variables; and the relationship between causal beliefs and current illness. Principal components analysis revealed two broad factors, accounting for 58 percent of the variation in scores on illness belief scales, distinctly interpretable as natural and supernatural beliefs. Second, beliefs in natural causes were more frequent than beliefs in supernatural causes. Third, some causal beliefs were commonly linked to both somatic and mental conditions while others were regarded as more specific to either somatic or mental disorders. Last, there was a range of correlations between endorsement of belief types and factors defining heterogeneity within the community, including with demographic factors, indicators of modernizing and acculturative processes, and the current presence of illness. Results supported the classification of causal beliefs proposed by Murdock, Wilson & Frederick, with a division into natural and supernatural causes. While belief in natural causes is more common, belief in supernatural causes persists despite modernizing and acculturative influences. Different

14 CFR 91.1089 - Qualifications: Check pilots (aircraft) and check pilots (simulator).

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Qualifications: Check pilots (aircraft) and check pilots (simulator). 91.1089 Section 91.1089 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... RULES Fractional Ownership Operations Program Management § 91.1089 Qualifications: Check pilots...

Round table discussion " Development of qualification framework in meteorology (TEMPUS QUALIMET)"

Science.gov (United States)

Bashmakova, I.; Belotserkovsky, A.; Karlin, L.; Petrosyan, A.; Serditova, N.; Zilitinkevich, S.

2010-09-01

The international consortium has started implementing a project aimed at the development of unified framework of qualifications in meteorology (QualiMet), setting a system of recognition and award of qualifications up to Doctoral level based on standards of knowledge, skill and competence acquired by learners is underway. The QualiMet has the following specific objectives: 1. To develop standards of knowledge, skills and competence for all qualifications up to Doctoral level needed in all possible occupations meteorology learner can undertake, by July 2011 2. To develop reciprocally recognized rubrics, criteria, methods and tools for assessing the compliance with the developed standards (quality assurance), by July 2012 3. To set the network of Centers of Excellence as the primary designer of sample education programs and learning experiences, both in brick-and-mortar and distant setting of delivery, leading to achievement of the developed standards, by December 2012 4. To set a system of mutual international recognition and award of qualifications in meteorology based on the developed procedures and establishment of self-regulatory public organization, by December 2012 The main beneficiaries of the project are: 1. Meteorology learners from the consortium countries. They will be able to make informed decisions about available qualification choices and progression options and provided an opportunity for students and graduates to participate in the system of international continuous education. 2. Meteorology employers from the consortium countries, They will be able to specify the level of knowledge, skill and competence required for occupational roles, evaluate qualifications presented, connect training and development with business needs. 3. Students and academic staff of all the consortium members, who will gain the increased mobility and exchange the fluxes of culturally and institutionally diversified lecturers and qualified specialists

What Happens When a Teacher's Science Belief Structure Is in Disequilibrium? Entangled Nature of Beliefs and Practice

Science.gov (United States)

Martin, Anita; Park, Soonhye; Hand, Brian

2017-08-01

This qualitative case study examined the process of change in an experienced elementary teacher's belief structure during implementation of an inquiry-based science program. Difficulties generally associated with ascertaining beliefs were minimized by using Leatham's (Journal of Mathematics Teacher Education, 9, 91-102 (2006) Sensible System Framework, enabling researchers to obtain rich descriptions of the teacher's belief structure by focusing on words (professed beliefs), intentions (intended beliefs), and actions (enacted beliefs). Models were constructed of the teacher's belief structure before and after implementation of the Science Writing Heuristic (SWH) approach (Hand et al. International Journal of Science Education, 26(2), 131-149, 2004), an inquiry-based approach to teaching science. Key beliefs for this teacher were related to how students learn, goals for teaching science, focus of instruction, and roles of teacher and student. Ultimately, the teacher shifted her professed, intended, and enacted beliefs resulting in a shift from a teacher-centered to a student-centered classroom. Findings support Thagard's Coherence Theory of Justification (2002), positing that change in one belief creates a state of disequilibrium that must be alleviated by changing/realigning other beliefs in order to re-establish coherence in the overall belief structure. This research focus is distinct from the general trend in teacher beliefs research in important ways. Most significant is that this study was not focused on the traditional two lists—those beliefs that were consistent with practice and those that were inconsistent with practice—but instead focused on the entwined nature of beliefs and practice and have shown that a teacher's practice can be viewed as their enacted beliefs, an integral part of the teacher's overall belief structure.

Do Humans Have Two Systems to Track Beliefs and Belief-Like States?

Science.gov (United States)

Apperly, Ian A.; Butterfill, Stephen A.

2009-01-01

The lack of consensus on how to characterize humans' capacity for belief reasoning has been brought into sharp focus by recent research. Children fail critical tests of belief reasoning before 3 to 4 years of age (H. Wellman, D. Cross, & J. Watson, 2001; H. Wimmer & J. Perner, 1983), yet infants apparently pass false-belief tasks at 13 or 15…

Extreme Overvalued Beliefs: How Violent Extremist Beliefs Become “Normalized”

Directory of Open Access Journals (Sweden)

Tahir Rahman

2018-01-01

Full Text Available Extreme overvalued beliefs (EOB are rigidly held, non-deusional beliefs that are the motive behind most acts of terrorism and mass shootings. EOBs are differentiated from delusions and obsessions. The concept of an overvalued idea was first described by Wernicke and later applied to terrorism by McHugh. Our group of forensic psychiatrists (Rahman, Resnick, Harry refined the definition as an aid in the differential diagnosis seen in acts of violence. The form and content of EOBs is discussed as well as group effects, conformity, and obedience to authority. Religious cults such as The People’s Temple, Heaven’s Gate, Aum Shinrikyo, and Islamic State (ISIS and conspiracy beliefs such as assassinations, moon-hoax, and vaccine-induced autism beliefs are discussed using this construct. Finally, some concluding thoughts on countering violent extremism, including its online presence is discussed utilizing information learned from online eating disorders and consumer experience.

Extreme Overvalued Beliefs: How Violent Extremist Beliefs Become “Normalized”

Science.gov (United States)

Rahman, Tahir

2018-01-01

Extreme overvalued beliefs (EOB) are rigidly held, non-deusional beliefs that are the motive behind most acts of terrorism and mass shootings. EOBs are differentiated from delusions and obsessions. The concept of an overvalued idea was first described by Wernicke and later applied to terrorism by McHugh. Our group of forensic psychiatrists (Rahman, Resnick, Harry) refined the definition as an aid in the differential diagnosis seen in acts of violence. The form and content of EOBs is discussed as well as group effects, conformity, and obedience to authority. Religious cults such as The People’s Temple, Heaven’s Gate, Aum Shinrikyo, and Islamic State (ISIS) and conspiracy beliefs such as assassinations, moon-hoax, and vaccine-induced autism beliefs are discussed using this construct. Finally, some concluding thoughts on countering violent extremism, including its online presence is discussed utilizing information learned from online eating disorders and consumer experience. PMID:29329259

Appointment, qualifications and responsibilities of ventilation officers

International Nuclear Information System (INIS)

1981-01-01

The Code provides for the appointment of a ventilation officer when required by the appropriate authority. This guideline offers comment on the appointment, qualifications, training and responsibilities of that person

Who Can Be President of the United States?: Candidate Hillary Clinton and the Problem of Statutory Qualifications

Directory of Open Access Journals (Sweden)

Tillman Seth Barrett

2016-04-01

Full Text Available Qualifications for public office restrict democratic choice, but such restrictions have a long pedigree in many jurisdictions. For example, the U.S. Constitution sets out qualifications for elected federal officials: i.e., Representative, Senator, President, and Vice President. Qualifications for those positions include provisions relating to age, citizenship, and residence. It has been long debated whether these textual qualifications are exclusive (i.e., floors and ceilings or whether they are merely floors, which can be supplemented by additional qualifications imposed by Congress or by the States.

AZ-101 Mixer Pump Test Qualification Test Procedures (QTP)

International Nuclear Information System (INIS)

THOMAS, W.K.

2000-01-01

Describes the Qualification test procedure for the AZ-101 Mixer Pump Data Acquisition System (DAS). The purpose of this Qualification Test Procedure (QTP) is to confirm that the AZ-101 Mixer Pump System has been properly programmed and hardware configured correctly. This QTP will test the software setpoints for the alarms and also check the wiring configuration from the SIMcart to the HMI. An Acceptance Test Procedure (ATP), similar to this QTP will be performed to test field devices and connections from the field

Development Of A Macro-Batch Qualification Strategy For The Hanford Tank Waste Treatment And Immobilization Plant

International Nuclear Information System (INIS)

Herman, Connie C.

2013-01-01

The Savannah River National Laboratory (SRNL) has evaluated the existing waste feed qualification strategy for the Hanford Tank Waste Treatment and Immobilization Plant (WTP) based on experience from the Savannah River Site (SRS) Defense Waste Processing Facility (DWPF) waste qualification program. The current waste qualification programs for each of the sites are discussed in the report to provide a baseline for comparison. Recommendations on strategies are then provided that could be implemented at Hanford based on the successful Macrobatch qualification strategy utilized at SRS to reduce the risk of processing upsets or the production of a staged waste campaign that does not meet the processing requirements of the WTP. Considerations included the baseline WTP process, as well as options involving Direct High Level Waste (HLW) and Low Activity Waste (LAW) processing, and the potential use of a Tank Waste Characterization and Staging Facility (TWCSF). The main objectives of the Hanford waste feed qualification program are to demonstrate compliance with the Waste Acceptance Criteria (WAC), determine waste processability, and demonstrate unit operations at a laboratory scale. Risks to acceptability and successful implementation of this program, as compared to the DWPF Macro-Batch qualification strategy, include: Limitations of mixing/blending capability of the Hanford Tank Farm; The complexity of unit operations (i.e., multiple chemical and mechanical separations processes) involved in the WTP pretreatment qualification process; The need to account for effects of blending of LAW and HLW streams, as well as a recycle stream, within the PT unit operations; and The reliance on only a single set of unit operations demonstrations with the radioactive qualification sample. This later limitation is further complicated because of the 180-day completion requirement for all of the necessary waste feed qualification steps. The primary recommendations/changes include the

URGENT AND LAG PSYCHOPHYSIOLOGICAL EFFECTS NEUROFEEDBACK IN SPORTSMEN OF HIGH QUALIFICATION

Directory of Open Access Journals (Sweden)

O. V. Kaigorodtseva

2013-01-01

Full Text Available The article provides a comparative analysis of the psychophysiological state of sportsmen of high qualification within one year after the course neurofeedback. These data demonstrated that high qualification sportsmen physiological effects of training persist throughout the year and depend on the ability to arbitrarily increase the power of the alpha rhythm of the brain.

NFC based Equipment Qualification Management (NEQM) system preventing counterfeit and fraudulent item

Energy Technology Data Exchange (ETDEWEB)

Chang, C.K., E-mail: ckchang@kings.ac.kr [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of); Lee, K.J., E-mail: klee@khu.ac.kr [Kyung Hee Univ., Seoul (Korea, Republic of)

2014-07-01

Qualification of equipment essential to safety in nuclear power plants (NPPs) ensures its capability to perform designated safety functions on demand under postulated service conditions. However, a number of incidents identified by the NRC since 1980s catalysed the US nuclear industry to adopt standard precautions to guard against counterfeit items. The purpose of this paper is to suggest the NFC (Near Field Communication) based equipment qualification management system preventing counterfeit and fraudulent items. The NEQM (NFC based Equipment Qualification Management) system work with the support of legacy systems such as PMS (Procurement Management System) and FMS (Facility management System). (author)

NFC based Equipment Qualification Management (NEQM) system preventing counterfeit and fraudulent item

International Nuclear Information System (INIS)

Chang, C.K.; Lee, K.J.

2014-01-01

Qualification of equipment essential to safety in nuclear power plants (NPPs) ensures its capability to perform designated safety functions on demand under postulated service conditions. However, a number of incidents identified by the NRC since 1980s catalysed the US nuclear industry to adopt standard precautions to guard against counterfeit items. The purpose of this paper is to suggest the NFC (Near Field Communication) based equipment qualification management system preventing counterfeit and fraudulent items. The NEQM (NFC based Equipment Qualification Management) system work with the support of legacy systems such as PMS (Procurement Management System) and FMS (Facility management System). (author)

Free will and paranormal beliefs.

Science.gov (United States)

Mogi, Ken

2014-01-01

Free will is one of the fundamental aspects of human cognition. In the context of cognitive neuroscience, various experiments on time perception, sensorimotor coordination, and agency suggest the possibility that it is a robust illusion (a feeling independent of actual causal relationship with actions) constructed by neural mechanisms. Humans are known to suffer from various cognitive biases and failures, and the sense of free will might be one of them. Here I report a positive correlation between the belief in free will and paranormal beliefs (UFO, reincarnation, astrology, and psi). Web questionnaires involving 2076 subjects (978 males, 1087 females, and 11 other genders) were conducted, which revealed significant positive correlations between belief in free will (theory and practice) and paranormal beliefs. There was no significant correlation between belief in free will and knowledge in paranormal phenomena. Paranormal belief scores for females were significantly higher than those for males, with corresponding significant (albeit weaker) difference in belief in free will. These results are consistent with the view that free will is an illusion which shares common cognitive elements with paranormal beliefs.

Free will and paranormal beliefs

Directory of Open Access Journals (Sweden)

Ken eMogi

2014-04-01

Full Text Available Free will is one of the fundamental aspects of human cognition. In the context of cognitive neuroscience, various experiments on time perception, sensorimotor coordination, and agency suggest the possibility that it is a robust illusion (a feeling independent of actual causal relationship with actions constructed by neural mechanisms. Humans are known to suffer from various cognitive biases and failures, and the sense of free will might be one of them. Here I report a positive correlation between the belief in free will and paranormal beliefs (UFO, reincarnation, astrology, and psi. Web questionnaires involving 2076 subjects (978 males, 1087 females, and 11 other genders were conducted, which revealed significant positive correlations between belief in free will (theory and practice and paranormal beliefs. There was no significant correlation between belief in free will and knowledge in paranormal phenomena. Paranormal belief scores for females were significantly higher than those for males, with corresponding significant (albeit weaker difference in belief in free will. These results are consistent with the view that free will is an illusion which shares common cognitive elements with paranormal beliefs.

Free will and paranormal beliefs

Science.gov (United States)

Mogi, Ken

2014-01-01

Free will is one of the fundamental aspects of human cognition. In the context of cognitive neuroscience, various experiments on time perception, sensorimotor coordination, and agency suggest the possibility that it is a robust illusion (a feeling independent of actual causal relationship with actions) constructed by neural mechanisms. Humans are known to suffer from various cognitive biases and failures, and the sense of free will might be one of them. Here I report a positive correlation between the belief in free will and paranormal beliefs (UFO, reincarnation, astrology, and psi). Web questionnaires involving 2076 subjects (978 males, 1087 females, and 11 other genders) were conducted, which revealed significant positive correlations between belief in free will (theory and practice) and paranormal beliefs. There was no significant correlation between belief in free will and knowledge in paranormal phenomena. Paranormal belief scores for females were significantly higher than those for males, with corresponding significant (albeit weaker) difference in belief in free will. These results are consistent with the view that free will is an illusion which shares common cognitive elements with paranormal beliefs. PMID:24765084

Equipment qualification research program: program plan

International Nuclear Information System (INIS)

Dong, R.G.; Smith, P.D.

1982-01-01

The Lawrence Livermore National Laboratory (LLNL) under the sponsorship of the US Nuclear Regulatory Commission (NRC) has developed this program plan for research in equipment qualification (EQA). In this report the research program which will be executed in accordance with this plan will be referred to as the Equipment Qualification Research Program (EQRP). Covered are electrical and mechanical equipment under the conditions described in the OBJECTIVE section of this report. The EQRP has two phases; Phase I is primarily to produce early results and to develop information for Phase II. Phase I will last 18 months and consists of six projects. The first project is program management. The second project is responsible for in-depth evaluation and review of EQ issues and EQ processes. The third project is responsible for detailed planning to initiate Phase II. The remaining three projects address specific equipment; i.e., valves, electrical equipment, and a pump

Status of the beryllium tile bonding qualification activities for the manufacturing of the ITER first wall

International Nuclear Information System (INIS)

Mitteau, Raphaël; Eaton, R.; Perez, G.; Zacchia, F.; Banetta, S.; Bellin, B.; Gervash, A.; Glazunov, D.; Chen, J.

2015-01-01

The preparation of the manufacturing of the ITER first wall involves a qualification stage. The qualification aims at demonstrating that manufacturers can deliver the needed reliability and quality for the beryllium to copper bond, before the manufacturing can commence. The qualification is done on semi-prototype, containing relevant features relative to the beryllium armour (about 1/6 of the panel size). The qualification is done by the participating parties, firstly by a manufacturing semi-prototype and then by testing it under heat flux. One semi-prototype is manufactured and is being tested, and further from other manufacturers are still to come. The qualification programme is accompanied by bond defect investigations, which aim at defining defect acceptance criteria. Qualification and defect acceptance programme are supported by thermal and stress analyses, with good agreement regarding the thermal results, and some insights about the governing factors to bond damage.

Status of the beryllium tile bonding qualification activities for the manufacturing of the ITER first wall

Energy Technology Data Exchange (ETDEWEB)

Mitteau, Raphaël, E-mail: Raphael.mitteau@iter.org [ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex (France); Eaton, R.; Perez, G. [ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex (France); Zacchia, F.; Banetta, S.; Bellin, B. [Fusion for Energy, Josep Pla 2, Torres Diagonal Litoral B3, 08019 Barcelona (Spain); Gervash, A.; Glazunov, D. [Efremov Research Institute, 189631 St. Petersburg (Russian Federation); Chen, J. [Southwestern Institute of Physics, Huangjing Road, Chengdu 610225 (China)

2015-10-15

The preparation of the manufacturing of the ITER first wall involves a qualification stage. The qualification aims at demonstrating that manufacturers can deliver the needed reliability and quality for the beryllium to copper bond, before the manufacturing can commence. The qualification is done on semi-prototype, containing relevant features relative to the beryllium armour (about 1/6 of the panel size). The qualification is done by the participating parties, firstly by a manufacturing semi-prototype and then by testing it under heat flux. One semi-prototype is manufactured and is being tested, and further from other manufacturers are still to come. The qualification programme is accompanied by bond defect investigations, which aim at defining defect acceptance criteria. Qualification and defect acceptance programme are supported by thermal and stress analyses, with good agreement regarding the thermal results, and some insights about the governing factors to bond damage.

Aircraft impact qualification of RBMK systems and components. Technical report. Rev. 00, May 1999

International Nuclear Information System (INIS)

1999-01-01

In the present report, the problem of qualification procedures of electrical equipment with respect to the dynamic excitation subsequent to an aircraft impact (ACC) on a Nuclear Power Plant (NPP) is approached, within the context of IAEA Benchmark on vulnerability of equipment and structures of RBMK-type NPP against the aircraft impact. After a short description of the main objectives of the work and the relevant area of concern (Chapter 1), the safety related equipment more commonly installed in a NPP are grouped in few classes, according to widely accepted classification criteria and the relevant failure modes are described (Chapter 2). Taking as reference a deeply studied RBMK reactor (Ignalina NPP), an overview of its main characteristics and of the equipment ensemble housed in is given in Chapter 3. An overview of the worldwide most used qualification standards for safety related equipment for NPPs is reported in Chapter 4, and a comparison of the practices used in Europe for the qualification of safety related electrical and I and C equipment is described with special attention to seismic and impact qualification (Chapter 5). In the hypothesis that the equipment to qualify against impact excitation has been already qualified against seismic excitation, the problems relevant to the different nature of earthquake and shock phenomena are listed, together with the main criteria to implement a procedure which, based on standardized shock pulses, could be applied for ACC qualification purposes (Chapter 6). Consequently, a possible ACC qualification procedure is outlined (Chapter 7) and the interface data (data coming from numerical analysis and seismic qualification, to be used for ACC qualification purposes) are listed (Chapter 8). Finally, the main conclusions of the work are described (Chapter 9). The main references are listed in Chapter 10. (author)

Design requirements, criteria and methods for seismic qualification of CANDU power plants

International Nuclear Information System (INIS)

Singh, N.; Duff, C.G.

1979-10-01

This report describes the requirements and criteria for the seismic design and qualification of systems and equipment in CANDU nuclear power plants. Acceptable methods and techniques for seismic qualification of CANDU nuclear power plants to mitigate the effects or the consequences of earthquakes are also described. (auth)

Qualification of organizations for independent technical supervision

International Nuclear Information System (INIS)

1981-04-01

The requirements are established on trial for the qualification of an organization as an independent technical supervision organization in nuclear facilities, in activities related with quality assurance programs. (I.C.R.) [pt

The HTR modular power reactor system. Qualification of fuel elements and materials

International Nuclear Information System (INIS)

Heidenreich, U.; Breitling, H.; Nieder, R.; Ohly, W.; Mittenkuehler, A.; Ragoss, H.; Seehafer, H.J.; Wirtz, K.; Serafin, N.

1989-01-01

For further development of the HTR modular power reactor system (HTR-M-KW), the project activities for 'Qualification of fuel elements and materials' reported here cover the work for specifying the qualifications to be met by metallic and ceramic materials, taking into account the design-based requirements and the engineered safety requirements. The fission product retention data determined for the HTR modular reactor fuel elements could be better confirmed by evaluation of the experiments, and have been verified by various calculation methods for different operating conditions. The qualification of components was verified by strength analyses including a benchmark calculation for specified normal operation and emergencies; the results show a convenient behaviour of the components and their materials. In addition, a fuel element burnup measuring system was designed that applies Cs-137 gamma spectroscopy; its feasibility was checked by appropriate analyses, and qualification work is in progress. The installation of a prototype measurement system is the task for project No. 03 IAT 211. (orig.) [de

Paranormal beliefs and religiosity: Chinese version of the Revised Paranormal Belief Scale.

Science.gov (United States)

Shiah, Yung-Jong; Tam, Wai-Cheong Carl; Wu, Ming-Hsun; Chang, Frances

2010-10-01

This paper reports an initial study investigating the relations of paranormal beliefs with religiosity in a Chinese sample, as well as the development of a Chinese version of the Revised Paranormal Belief Scale and a test of its psychometric properties with 310 college students (5.5% Christians, 21.3% Buddhists, 61% believers in traditional Chinese religions, and 12% atheists). The reliability and validity of the Chinese version were satisfactory. In general, traditional Chinese religious believers had higher scores on paranormal belief than did Christians and atheists, and the mean total score of the Chinese participants was higher than previously reported in a Western sample. It was concluded that the greater involvement of practitioners of traditional Chinese religions in activities emphasizing paranormal experiences might contribute to their greater paranormal belief, especially as compared to the minority Christian group. The results are consistent with the idea that Christianity may offer the least support for paranormal belief.

PR Faculty: What Are Their Qualifications?

Science.gov (United States)

Johnson, Thomas B.; Rabin, Kenneth

1977-01-01

Discusses a study designed to determine existing trends in the backgrounds and qualifications of public relations instructors and how these might affect public relations education. Available from: Public Relations Review, Ray Hiebert, Dean, College of Journalism, University of Maryland, College Park, MD 20742. (MH)

Relationship Between Teachers\\' Qualification And Students ...

African Journals Online (AJOL)

It has been observed that students\\' performance in technical subjects is very poor. Coupled with this problem is that of lack of qualified technical teachers. This study determines the relationship between teachers\\' qualification and students\\' performance in technical subjects in selected schools in northern Nigeria.

42 CFR 485.705 - Personnel qualifications.

Science.gov (United States)

2010-10-01

... Physical Therapy and Speech-Language Pathology Services § 485.705 Personnel qualifications. (a) General... involved in the furnishing of outpatient physical therapy, occupational therapy, and speech-language...) of the Act and the requirements in part 484 of this chapter. (2) For a speech-language pathologist...

A strategy for implementation of experience based seismic equipment qualification in IEEE and ASME industry standards

International Nuclear Information System (INIS)

Adams, T.M.

1996-01-01

In the past 20 years, extensive data on the performance of mechanical and electric equipment during actual strong motion earthquakes and seismic qualification tests has been accumulated. Recognizing that an experience based approach provides a technically sound and cost effective method for the seismic qualification of some or certain equipment, the IEEE Nuclear Power Engineering Committee and the ASME Committee on Qualification of Mechanical Equipment established a Special Working Group to investigate the incorporation of experienced based methods into the industry consensus codes and standards currently used in the seismic qualification of Seismic Category Nuclear Power Plant equipment. This paper presents the strategy (course of action) which was developed by the Special Working Group for meeting this objective of incorporation of experience based seismic qualification standards used in the design and seismic qualification of seismic category nuclear power plant equipment. This strategy was recommended to both chartering organizations, the IEEE Nuclear Power Engineering Committee and the ASME Committee on Qualification of Mechanical Equipment for their consideration and implementation. The status of the review and implementation of the Special Working Group's recommended strategy by the sponsoring organization is also discussed

Professional Exam as a Tool for Forming the Trajectory of Improving the Qualification of an Employee

Directory of Open Access Journals (Sweden)

Egorov I.

2017-11-01

Full Text Available The results of the study of the provisions of the Federal Law "On Independent Qualification Assessment", of an explanatory note to the draft of the Federal Law "On Independent Qualification Assessment", of a number of other normative legal acts regarding the objectives and procedure for the implementation of an independent assessment of qualifications, including a professional exam, the use of its results, are described. On the basis of the analysis of a number of research works on the improvement of the qualifications of employees and the development of the system of continuous education, conclusions were drawn on an objective assessment by the legislator of a permanent increase in the requirements for the qualification of workers and the consequent need for continuous improvement of their qualifications, including the development of a continuous education system. Proposals have been formulated to introduce amendments to the legislation of the Russian Federation aimed at forming a recommendation for an employee to select existing resources for the self-alignment of an individual set of competences with a personalized offer of support options from the educational and professional structures - the trajectory of improving the qualification of an employee..

Scandinavian belief in fate

Directory of Open Access Journals (Sweden)

Åke Ström

1967-02-01

Full Text Available In point of principle, Christianity does not give room for any belief in fate. Astrology, horoscopes, divination, etc., are strictly rejected. Belief in fate never disappeared in Christian countries, nor did it in Scandinavia in Christian times. Especially in folklore we can find it at any period: People believed in an implacable fate. All folklore is filled up with this belief in destiny. Nobody can escape his fate. The future lies in the hands of fate, and the time to come takes its form according to inscrutable laws. The pre-Christian period in Scandinavia, dominated by pagan Norse religion, and the secularized epoch of the 20th century, however, show more distinctive and more widespread beliefs in fate than does the Christian period. The present paper makes a comparison between these forms of belief.

Moral Beliefs and Cognitive Homogeneity

Directory of Open Access Journals (Sweden)

Nevia Dolcini

2018-04-01

Full Text Available The Emotional Perception Model of moral judgment intends to account for experientialism about morality and moral reasoning. In explaining how moral beliefs are formed and applied in practical reasoning, the model attempts to overcome the mismatch between reason and action/desire: morality isn’t about reason for actions, yet moral beliefs, if caused by desires, may play a motivational role in (moral agency. The account allows for two kinds of moral beliefs: genuine moral beliefs, which enjoy a relation to desire, and motivationally inert moral beliefs acquired in ways other than experience. Such etiology-based dichotomy of concepts, I will argue, leads to the undesirable view of cognition as a non-homogeneous phenomenon. Moreover, the distinction between moral beliefs and moral beliefs would entail a further dichotomy encompassing the domain of moral agency: one and the same action might possibly be either genuine moral, or not moral, if acted by individuals lacking the capacity for moral feelings, such as psychopaths.

Belief attribution despite verbal interference.

Science.gov (United States)

Forgeot d'Arc, Baudouin; Ramus, Franck

2011-05-01

False-belief (FB) tasks have been widely used to study the ability of individuals to represent the content of their conspecifics' mental states (theory of mind). However, the cognitive processes involved are still poorly understood, and it remains particularly debated whether language and inner speech are necessary for the attribution of beliefs to other agents. We present a completely nonverbal paradigm consisting of silent animated cartoons in five closely related conditions, systematically teasing apart different aspects of scene analysis and allowing the assessment of the attribution of beliefs, goals, and physical causation. In order to test the role of language in belief attribution, we used verbal shadowing as a dual task to inhibit inner speech. Data on 58 healthy adults indicate that verbal interference decreases overall performance, but has no specific effect on belief attribution. Participants remained able to attribute beliefs despite heavy concurrent demands on their verbal abilities. Our results are most consistent with the hypothesis that belief attribution is independent from inner speech.

"EU-on-Demand": Developing National Qualifications Frameworks in a Multi-Level Context

Science.gov (United States)

Elken, Mari

2016-01-01

The development of comprehensive national qualifications frameworks (NQFs) across Europe has been sparked by the introduction of the European Qualifications Framework (EQF) in 2008. Taking an institutional perspective, this article examines the development of NQFs in three countries, in light of developments that have taken place at the European…

When fast logic meets slow belief: Evidence for a parallel-processing model of belief bias.

Science.gov (United States)

Trippas, Dries; Thompson, Valerie A; Handley, Simon J

2017-05-01

Two experiments pitted the default-interventionist account of belief bias against a parallel-processing model. According to the former, belief bias occurs because a fast, belief-based evaluation of the conclusion pre-empts a working-memory demanding logical analysis. In contrast, according to the latter both belief-based and logic-based responding occur in parallel. Participants were given deductive reasoning problems of variable complexity and instructed to decide whether the conclusion was valid on half the trials or to decide whether the conclusion was believable on the other half. When belief and logic conflict, the default-interventionist view predicts that it should take less time to respond on the basis of belief than logic, and that the believability of a conclusion should interfere with judgments of validity, but not the reverse. The parallel-processing view predicts that beliefs should interfere with logic judgments only if the processing required to evaluate the logical structure exceeds that required to evaluate the knowledge necessary to make a belief-based judgment, and vice versa otherwise. Consistent with this latter view, for the simplest reasoning problems (modus ponens), judgments of belief resulted in lower accuracy than judgments of validity, and believability interfered more with judgments of validity than the converse. For problems of moderate complexity (modus tollens and single-model syllogisms), the interference was symmetrical, in that validity interfered with belief judgments to the same degree that believability interfered with validity judgments. For the most complex (three-term multiple-model syllogisms), conclusion believability interfered more with judgments of validity than vice versa, in spite of the significant interference from conclusion validity on judgments of belief.

Performing accountability: Making environmental credentials visible in housing design

International Nuclear Information System (INIS)

Shaw, Isabel; Ozaki, Ritsuko

2015-01-01

Making housing developments ‘environmentally sustainable’ requires housing developers to be accountable for their ‘green’ credentials. Accountability is promoted by both the UK government's environmental policy for housing design – the Code for Sustainable Homes – and local councils in their planning criteria. These accountability practices are key to how relationships between housing professionals and local planning authorities influence practices and outcomes of environmental sustainability. In this article, we examine how accountability is performed in housing design and development. We argue that accountability practices involve the management of making environmental sustainability visible through demonstrating the utilization of sustainable technologies. We contend that these ‘visibility’ practices are carried out to the detriment of an appreciation of how energy is both provided and consumed. We contend that using the installation phase of sustainable technologies as a point of adequate assessment of the environmental effectiveness of a building is short-sighted. Policy needs to look beyond this, and consult with professionals who develop and sell houses to understand better their working priorities and contexts that shape the provision of renewable energy in the planning phase and post-build. - Highlights: • Accountability practices shape environmental sustainability practices and outcomes. • Making sustainability ‘visible’ involves the use of sustainable technologies. • Policy should consider how it affects professionals work and energy provision. • Visibility practices influence energy provision and potential consumption.

WTP Waste Feed Qualification: Glass Fabrication Unit Operation Testing Report

Energy Technology Data Exchange (ETDEWEB)

Stone, M. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL). Hanford Missions Programs; Newell, J. D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL). Process Technology Programs; Johnson, F. C. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL). Engineering Process Development; Edwards, T. B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL). Engineering Process Development

2016-07-14

The waste feed qualification program is being developed to protect the Hanford Tank Waste Treatment and Immobilization Plant (WTP) design, safety basis, and technical basis by assuring waste acceptance requirements are met for each staged waste feed campaign prior to transfer from the Tank Operations Contractor to the feed receipt vessels inside the Pretreatment Facility. The Waste Feed Qualification Program Plan describes the three components of waste feed qualification: 1. Demonstrate compliance with the waste acceptance criteria 2. Determine waste processability 3. Test unit operations at laboratory scale. The glass fabrication unit operation is the final step in the process demonstration portion of the waste feed qualification process. This unit operation generally consists of combining each of the waste feed streams (high-level waste (HLW) and low-activity waste (LAW)) with Glass Forming Chemicals (GFCs), fabricating glass coupons, performing chemical composition analysis before and after glass fabrication, measuring hydrogen generation rate either before or after glass former addition, measuring rheological properties before and after glass former addition, and visual observation of the resulting glass coupons. Critical aspects of this unit operation are mixing and sampling of the waste and melter feeds to ensure representative samples are obtained as well as ensuring the fabrication process for the glass coupon is adequate. Testing was performed using a range of simulants (LAW and HLW simulants), and these simulants were mixed with high and low bounding amounts of GFCs to evaluate the mixing, sampling, and glass preparation steps in shielded cells using laboratory techniques. The tests were performed with off-the-shelf equipment at the Savannah River National Laboratory (SRNL) that is similar to equipment used in the SRNL work during qualification of waste feed for the Defense Waste Processing Facility (DWPF) and other waste treatment facilities at the

STATED VS. ENACTED BELIEFS: LOOKING AT PRE-SERVICE TEACHERS' PEDAGOGICAL BELIEFS THROUGH CLASSROOM INTERACTION

Directory of Open Access Journals (Sweden)

Alberto Fajardo

2013-08-01

Full Text Available This article explores the relationship between pedagogical beliefs and classroom practice. Two Colombian pre-service primary school language teachers in the final stage of their five-year training programme were the research participants. Interview and classroom observation were the methods used, and content analysis was the analytical approach. It is argued in this study that by comparing the stated beliefs (as articulated in interviews and enacted beliefs (as manifested in classroom interaction, it is possible to gain a fine-grained understanding of the relationship between beliefs and teaching practice. The findings suggested that while there were significant cases of coherence between beliefs and classroom action, there was also evidence of some incongruent relationships.

STEM Leadership Qualification: Tomorrow's Leaders Today

Science.gov (United States)

Williams, Chris

2009-01-01

This article features the Science, Technology, Engineering and Mathematics (STEM) Leadership Qualification programme, developed by the Centre for Science Education (CSE) at Sheffield Hallam University in collaboration with Edexcel, which sets out to develop leadership skills and capabilities through contexts in STEM. With six units to complete…

5 CFR 330.208 - Qualification requirements.

Science.gov (United States)

2010-01-01

... perform the duties and responsibilities of the position. (c) The sex of an individual may not be... qualified for a position if he or she: (1) Meets OPM-established or approved qualification standards and requirements for the position, including any minimum educational requirements, and any selection placement...

Quality Assurance and Qualifications Frameworks: Exchanging Good Practice. ENQA Workshop Report 21

Science.gov (United States)

Blomqvist, Carita; Donohoe, Tony; Kelo, Maria; Linde, Karin Jarplid; Llavori, Rafael; Maguire, Bryan; Metz, David; Sanchez, Teresa

2012-01-01

The theme of qualifications frameworks and their relation to quality assurance is gaining urgency in the European scene as more and more countries are completing their national qualifications frameworks and quality assurance agencies need to take important decisions on how to implement them. Some of the key features of the qualifications…

10 CFR 50.120 - Training and qualification of nuclear power plant personnel.

Science.gov (United States)

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Training and qualification of nuclear power plant... Training and qualification of nuclear power plant personnel. (a) Applicability. The requirements of this... each holder of a combined license issued under part 52 of this chapter for a nuclear power plant of the...

Logic qualification of FPGA-based safety-related I and C systems

International Nuclear Information System (INIS)

Hayashi, Toshifumi; Oda, Naotaka; Ito, Toshiaki; Miyazaki, Tadashi; Haren, Yasuhiko

2009-01-01

We established a logic qualification method for FPGA-Based I and C safety-related use in Nuclear Power Plants Systems. The FPGA is a programmable logic device and has advantages that the programming is rigorous, simple verifiable, and the technology is stable. However, logic qualification of FPGA had been an issue to be solved when it is used in the safety-related systems, because FPGA is relatively new technology for the nuclear power industry. We employed a software-life cycle approach, because its development process is similar to that of conventional computer-based systems. There are some differences between the FPGA-Based systems and the computer-based systems in the implementation and integration of logic. We examined the FPGA logic implementation and integration process to identify any FPGA-Based system specific hazards. The identified hazards are (1) small logic errors, (2) timing errors, (3) logic synthesis errors, (4) place and route errors, and (5) logic embedding errors. We took the appropriate countermeasures to mitigate these hazards, and employed this logic qualification method in the qualification of the Power Range Monitor System for BWR Power Plants. (author)

The birth beliefs scale - a new measure to assess basic beliefs about birth.

Science.gov (United States)

Preis, Heidi; Benyamini, Yael

2017-03-01

Basic beliefs about birth as a natural and safe or a medical and risky process are central in the decisions on where and how to birth. Despite their importance, they have not been studied separately from other childbirth-related constructs. Our aim was to develop a measure to assess these beliefs. Pregnant Israeli women (N = 850, gestational week ≥14) were recruited in women's health centers, in online natural birth forums, and through home midwives. Participants filled in questionnaires including sociodemographic and obstetric background, the Birth Beliefs Scale (BBS), dispositional desire for control (DC) and planned mode of delivery. Factor analyses revealed that the BBS is composed of two factors: beliefs about birth as a natural process and beliefs about birth as a medical process. Both subscales showed good internal and test-retest reliability. They had good construct validity, predicted birth choices, and were weakly correlated with DC. Women's medical obstetric history was associated with the BBS, further supporting the validity of the scale. Beliefs about birth may be the building blocks that make up perceptions of birth and drive women's preferences. The new scale provides an easy way to distinctly assess them so they can be used to further understand planned birth behaviors. Additional studies are needed to comprehend how these beliefs form in different cultural contexts and how they evolve over time.

DATA QUALIFICATION REPORT: DATA QUALIFICATION REPORT FOR 1991 1:1200 TOPOGRAPHIC MAPS FOR USE ON THE YUCCA MOUNTAIN PROJECT

International Nuclear Information System (INIS)

Knop, M.F.; Grant, T.A.; Bonisolli, R.W.

2005-01-01

This Data Qualification Report (DQR) is prepared in accordance with the provisions of AP-SIII.2Q, Rev. 0, ICN 3, Qualification of Unqualified Data and the Documentation of Rationale for Accepted Data and Data Qualification Plan for 1991 Topographic Maps 1:1200 Scale for use on the Yucca Mountain Project, DQP-WHS-CI-000001, Rev. 00 (BSC 2002a). This DQR presents an evaluation of a set of 90 topographic sheets at 1:1200 scale (and an associated electronic file) that covers an approximate 18 square mile area surrounding the proposed Yucca Mountain Project repository surface facilities location in Midway Valley, Nevada. These maps, that require qualification, are now being used to determine the physical characteristics of watershed sub-areas, interconnecting channels, and drainage channel cross-sections for hydrologic engineering studies of the north portal pad and vicinity. The result of this effort is to qualify one data tracking number (DTN) containing the electronic version of the mapping data. This DTN is: M09906COV98462.000. Coverage: TOP02FTS. The underlying quality assurance (QA) issue associated with these topographic maps is that the maps were originally designated as not for use in the design of items important to safety, waste isolation, and/or of programmatic importance. The maps were therefore generated outside the U.S. Department of Energy Office of Civilian Radioactive Waste Management (OCRWM) QA program. Based on a comparison with corroborating information, this report concludes that the topographic maps are qualified. The comparison found that the mapping was reasonably accurate when compared with other mapping and survey data within the coverage area of the maps. Relative map accuracy was found to be very good and suitable for the hydrologic engineering studies being considered. Absolute accuracy is good but could not be demonstrated to comply with national map accuracy standards. Point locations that require high absolute accuracy should be

78 FR 25488 - Qualification Tests for Safety-Related Actuators in Nuclear Power Plants

Science.gov (United States)

2013-05-01

... Nuclear Power Plants AGENCY: Nuclear Regulatory Commission. ACTION: Draft regulatory guide; request for... regulatory guide (DG), DG-1235, ``Qualification Tests for Safety-Related Actuators in Nuclear Power Plants... entitled ``Qualification Tests for Safety-Related Actuators in Nuclear Power Plants'' is temporarily...

A Motor Drive Electronics Assembly for Mars Curiosity Rover: An Example of Assembly Qualification for Extreme Environments

Science.gov (United States)

Kolawa, Elizabeth; Chen, Yuan; Mojarradi, Mohammad M.; Tudryn Weber, Carissa

2013-01-01

In this paper, the technology development and infusion of the motor drive electronics assembly, along with the technology qualification and space qualification, is described and detailed. The process is an example of the qualification methodology for extreme environmen

Lucky Belief in Science Education - Gettier Cases and the Value of Reliable Belief-Forming Processes

Science.gov (United States)

Brock, Richard

2018-05-01

The conceptualisation of knowledge as justified true belief has been shown to be, at the very least, an incomplete account. One challenge to the justified true belief model arises from the proposition of situations in which a person possesses a belief that is both justified and true which some philosophers intuit should not be classified as knowledge. Though situations of this type have been imagined by a number of writers, they have come to be labelled Gettier cases. Gettier cases arise when a fallible justification happens to lead to a true belief in one context, a case of `lucky belief'. In this article, it is argued that students studying science may make claims that resemble Gettier cases. In some contexts, a student may make a claim that is both justified and true but which arises from an alternative conception of a scientific concept. A number of instances of lucky belief in topics in science education are considered leading to an examination of the criteria teachers use to assess students' claims in different contexts. The possibility of lucky belief leads to the proposal that, in addition to the acquisition of justified true beliefs, the development of reliable belief-forming processes is a significant goal of science education. The pedagogic value of various kinds of claims is considered and, it is argued, the criteria used to judge claims may be adjusted to suit the context of assessment. It is suggested that teachers should be alert to instances of lucky belief that mask alternative conceptions.

QUALIFICATIONS FRAMEWORKS LEADING TO REFORMS IN EAST EUROPEAN EDUCATION

Directory of Open Access Journals (Sweden)

Arjen Vos

2014-01-01

Full Text Available The paper examines the evolution of qualifications frameworks across Europe. Five years ago, it was not clear if the discussions on national qualification frameworks (NQF in Eastern Europe would lead to the new standards and qualifications development, or initiate the reforms in education and training. Now, there is evidence of more countries using the NQFs to promote a dialogue between the public and private sectors on the expected outcomes of educational process. In some countries, the private sector has even taken the lead in the NQF discussions, being increasingly involved in their implementation. This is a fundamentally new paradigm in education policies and a cornerstone of the demand driven education and training. Each country is following its own patterns while moving to the comparable results. However, this is just the initial stage of NQF implementation. The author regards learning by doing and the local expertise expansion as the key challenges of the coming years. Although the reforms take time, they increasingly tend to become a shared public and private responsibility.

Preliminary Hanford Waste Vitrification Plan Waste Form Qualification Plan

International Nuclear Information System (INIS)

Nelson, J.L.

1987-09-01

This Waste Form Qualification Plan describes the waste form qualification activities that will be followed during the design and operation of the Hanford Waste Vitrification Plant to ensure that the vitrified Hanford defense high-level wastes will meet the acceptance requirements of the candidate geologic repositories for nuclear waste. This plan is based on the defense waste processing facility requirements. The content of this plan is based on the assumption that the Hanford Waste Vitrification Plant high-level waste form will be disposed of in one of the geologic repository projects. Proposed legislation currently under consideration by Congress may change or delay the repository site selection process. The impacts of this change will be assessed as details of the new legislation become available. The Plan describes activities, schedules, and programmatic interfaces. The Waste Form Qualification Plan is updated regularly to incorporate Hanford Waste Vitrification Plant-specific waste acceptance requirements and to serve as a controlled baseline plan from which changes in related programs can be incorporated. 10 refs., 5 figs., 5 tabs

A primer on standards setting as it applies to surgical education and credentialing.

Science.gov (United States)

Cendan, Juan; Wier, Daryl; Behrns, Kevin

2013-07-01

Surgical technological advances in the past three decades have led to dramatic reductions in the morbidity associated with abdominal procedures and permanently altered the surgical practice landscape. Significant changes continue apace including surgical robotics, natural orifice-based surgery, and single-incision approaches. These disruptive technologies have on occasion been injurious to patients, and high-stakes assessment before adoption of new technologies would be reasonable. We reviewed the drivers for well-established psychometric techniques available for the standards-setting process. We present a series of examples that are relevant in the surgical domain including standards setting for knowledge and skills assessments. Defensible standards for knowledge and procedural skills will likely become part of surgical clinical practice. Understanding the methodology for determining standards should position the surgical community to assist in the process and lead within their clinical settings as standards are considered that may affect patient safety and physician credentialing.

French Secondary School Students' Perceptions of the Education-Labor Market Link

Science.gov (United States)

Sanquirgo, Nathalie; Turton, Richard; Killeen, John; Diamond, Wayne; Wach, Monique

2004-01-01

A survey was conducted to examine the strength of beliefs among French school pupils in three perceptions of the education-labor market link traditionally studied in the economy of human capital: "productivity", "screening" and "credentialism." Male and female French students aged between 14 and 24 years responded to…

Graduate Employability: A Conceptual Framework for Understanding Employers' Perceptions

Science.gov (United States)

Cai, Yuzhuo

2013-01-01

This study provides a conceptual framework for understanding what employers think about the value of graduates with similar educational credentials in the workplace (their employability), using insights from the new institutionalism. In this framework, the development of employers' beliefs about graduates' employability is broken into a number of…

Qualification of the flight-critical AFTI/F-16 digital flight control system. [Advanced Fighter Technology Integration

Science.gov (United States)

Mackall, D. A.; Ishmael, S. D.; Regenie, V. A.

1983-01-01

Qualification considerations for assuring the safety of a life-critical digital flight control system include four major areas: systems interactions, verification, validation, and configuration control. The AFTI/F-16 design, development, and qualification illustrate these considerations. In this paper, qualification concepts, procedures, and methodologies are discussed and illustrated through specific examples.

Qualification of γ-heating calculation in nuclear reactors

International Nuclear Information System (INIS)

Ravaux, Simon

2013-01-01

During the last few years, the γ-heating issue has gained in stature, mainly for the safety of the 3. generation reactors in which a stainless steel reflector is inserted. The purpose of this work is the qualification of the needed tools for calculation of the γ-heating in the nuclear reactors. In a nuclear reactor, all the photons are directly or indirectly produced by the neutron-matter interactions. Thus, the first phase of this work is a critical analysis of the photon production data in the standard nuclear data library. New evaluations have been proposed to the next version of the JEFF library after that some omissions have been found. They have partly been accepted for JEFF-3.2. Two particle-transport codes are currently developed in the CEA: the deterministic code APOLLO2 and the Monte Carlo code TRIPOLI4. The second part of this work is the qualification of both these codes by interpreting an integral experiment called PERLE. The experimental set-up is made by a LWR pin assembly surrounded by a stainless steel reflector in which the γ-heating is measured by Thermo-luminescent Detector (TLD). A calculation scheme has been proposed for both APOLLO2 and TRIPOLI4 in order to calculate the TLD's responses. Comparisons between calculations and measurements have shown that TRIPOLI4 gives a satisfactory estimation of the γ-heating in the reflector. These discrepancies are within the experimental 1 σ uncertainty. Before the qualification, APOLLO2 has been previously validated against TRIPOLI4 reference calculation. This validation gives an estimation of the bias due to the deterministic approximations of the transport equation resolution. The qualification has shown that the discrepancies between APOLLO2 predictions and TLD's measurements are in the same range as experimental uncertainties. (author) [fr

Index of Submarine Medical Officer’s Qualification Theses 1944-1974

Science.gov (United States)

1976-04-01

USING HYPOTHERMIA AND HYPERBARIC CXYGENATI 1972-3011 0 A CASE REPO+ HYPOBARIC HYPOXIA ABOARD A SUBMERGED SUBMARINE 1972-0014 THE EFFECTS OF ACUTE HYPOXIA...G009 LEVEL. VENTILATORY DYNAMICS UNDER HYPERBARIC STATES.= SUBMARINE MEDICAL QUALIFICATION THESES U. So NAVAL SJBMARINE MEDICAL CENTER SUBMARINE BASE...CONNECTICUT. 23 OCT 62 StJRL ____________ 1962-0019 WOO3D W.- - ____ VENTILATORY DYNAMICS UNDER HYPERBARIC STATES.= SUBMARINE MEDICAL QUALIFICATION THESES

Development of equipment qualification requirements for NPP instrumentation and control systems

International Nuclear Information System (INIS)

Siora, A. A.; Reshetitskij, S. V.; Harybin, A. V.

2012-01-01

The main stages of equipment qualification are presented. The aim of the work is to ensure compatibility between Ukrainian and international requirements. A comparison with US NRC requirements has been done. The approach in equipment qualification is presented for the resistance to: irradiation; dust; seismic motion, vibrations and mechanical impact; environmental impact (temperature, humidity, pressure); power supply parameters etc., as well as the technological testing

14 CFR 121.411 - Qualifications: Check airmen (airplane) and check airmen (simulator).

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Qualifications: Check airmen (airplane) and... § 121.411 Qualifications: Check airmen (airplane) and check airmen (simulator). (a) For the purposes of this section and § 121.413: (1) A check airman (airplane) is a person who is qualified, and permitted...

Qualification of anticorrosive coatings in nuclear vessels

International Nuclear Information System (INIS)

Perez Flores, C.

1985-01-01

Test qualifications of the behavior of anticorrosive coating systems used in nuclear vessels in service and under the accident conditions of radiation decontamination, steam chemical resistance, thermal conductivity, weathering accelerated aging are presented and discussed. (author)

Qualifications and Skills: The Organisational Perspective

Science.gov (United States)

Dafou, Efthimia

2009-01-01

This paper portrays the inferences that employers in Greece draw from particular aspects of study programmes, as recorded on educational qualifications. Based on semi-structured interviews with human resource managers in 37 industrial and service organisations and general directors of careers offices in eight higher education institutions, and…

Application of Microprocessor-Based Equipment in Nuclear Power Plants - Technical Basis for a Qualification Methodology

International Nuclear Information System (INIS)

Korsah, K.

2001-01-01

This document (1) summarizes the most significant findings of the ''Qualification of Advanced Instrumentation and Control (I and C) Systems'' program initiated by the Nuclear Regulatory Commission (NRC); (2) documents a comparative analysis of U.S. and European qualification standards; and (3) provides recommendations for enhancing regulatory guidance for environmental qualification of microprocessor-based safety-related systems. Safety-related I and C system upgrades of present-day nuclear power plants, as well as I and C systems of Advanced Light-Water Reactors (ALWRs), are expected to make increasing use of microprocessor-based technology. The Nuclear Regulatory Commission (NRC) recognized that the use of such technology may pose environmental qualification challenges different from current, analog-based I and C systems. Hence, it initiated the ''Qualification of Advanced Instrumentation and Control Systems'' program. The objectives of this confirmatory research project are to (1) identify any unique environmental-stress-related failure modes posed by digital technologies and their potential impact on the safety systems and (2) develop the technical basis for regulatory guidance using these findings. Previous findings from this study have been documented in several technical reports. This final report in the series documents a comparative analysis of two environmental qualification standards--Institute of Electrical and Electronics Engineers (IEEE) Std 323-1983 and International Electrotechnical Commission (IEC) 60780 (1998)--and provides recommendations for environmental qualification of microprocessor-based systems based on this analysis as well as on the findings documented in the previous reports. The two standards were chosen for this analysis because IEEE 323 is the standard used in the U.S. for the qualification of safety-related equipment in nuclear power plants, and IEC 60780 is its European counterpart. In addition, the IEC document was published in

A growth analysis of teacher qualifications and students' global self-esteem

DEFF Research Database (Denmark)

Kristensen, Rune Müller

2017-01-01

, educational degree and employment status have a minor but significant effect on students’ GSE. Some of these effects differ between boys and girls, showing that boys react positively to teachers with high levels of content knowledge, while girls react positively to teachers with a higher degree of pedagogical...... teacher qualifications in terms of certification, educational degree and employment status affect students’ development in GSE. Effects of teacher qualifications influence on students’ development in GSE over time is modelled using growth curve analysis. Results show that elements in teacher certification......There is an increased focus on students’ non-academic outcomes of schooling and its long-term impact on the adolescents’ later life. Teachers are viewed as the most significant factor in schools for improving student learning and development. Little is known on effects of teacher qualifications...

Seismic and environmental qualification of class IE equipment manufactured in Spain

International Nuclear Information System (INIS)

Gerini, P.; Lumbreras, A.; Naredo, F.

1978-01-01

Nuclear power plant instrumentation and control design is affected by several factors such as various plant operating conditions, transient response capability, safety requirements and changes in IEEE standards. Recent upgraded IEEE standards that call for Qualification of all Safety related I anc C equipment, namely IEEE 323 (Qualifying Class IE Electric Equipment for nuclear power generating stations) and its daughter Standard IEEE 344 (Recommended Practices for Seismic Qualification of Class IE Equipment for nuclear power generating stations) have been endorsed by the United States Nuclear Regulatory Commission through the issuance of corresponding Regulatory Guides. The author describes the Qualification requirements applicable to the Class IE I and C Components made in Spain for the different vintages of plants, and the programs implemented or plans established by Westinghouse to fulfill those requirements. (author)

On ISI effectiveness through inspection qualification

International Nuclear Information System (INIS)

Harutyunov, R.

2000-01-01

There are two units of WWER type in the ANPP. The results of the implementation of the IAEA qualification guidelines for the ANPP Primary Circuit for WWER are presented. The control methods according to the ISI Program are foreseen in the design and implemented during the preparation for the unit 2 restart. The result of control is plugging of more tubes than during the last operation period. During the next years in the presence of the blowdown water activity, the search on defective tubes was performed by Lumhydraulic methods and the tubes were plugged by welding plugs. In 1999 was performed the visual control on the Steam Generator 6 by WNIAES experts and by the ANPP experts from the Metal Laboratory. The result is confirmation of the irreversible process on erosive-corrosion destruction of feed waters distribution header; definition of the defects coordinates defined; detection of sediments within the SG vessel surfaces and in the head exchanged surface tubes. The purpose of the ISI effectiveness improvement is to discover the defects in the base metal and in the welds before developing into a problem at operating level or a safety problem. For the solution on the specific problems at the ANPP the project for technological co-operation with IAEA has been developed. It is necessary to organize training, certification, assessment methodology. The expected results after the project implementation are to establish the base for the equipment qualification body and staff certification; to upgrade the ANPP staff qualification; to prepare a group of experts, supported by ANRA, which to be also involved in the development of NDM national regulators

Commercial Parts Technology Qualification Processes

Science.gov (United States)

Cooper, Mark S.

2013-01-01

Many high-reliability systems, including space systems, use selected commercial parts (including Plastic Encapsulated Microelectronics or PEMs) for unique functionality, small size, low weight, high mechanical shock resistance, and other factors. Predominantly this usage is subjected to certain 100% tests (typically called screens) and certain destructive tests usually (but not always) performed on the flight lot (typically called qualification tests). Frequently used approaches include those documented in EEE-INST-002 and JPL DocID62212 (which are sometimes modified by the particular aerospace space systems manufacturer). In this study, approaches from these documents and several space systems manufacturers are compared to approaches from a launch systems manufacturer (SpaceX), an implantable medical electronics manufacturer (Medtronics), and a high-reliability transport system process (automotive systems). In the conclusions section, these processes are outlined for all of these cases and presented in tabular form. Then some simple comparisons are made. In this introduction section, the PEM technology qualification process is described, as documented in EEE-INST-002 (written by the Goddard Space Flight Center, GSFC), as well as the somewhat modified approach employed at the Jet Propulsion Laboratory (JPL). Approaches used at several major NASA contractors are also described

48 CFR 6301.2 - Qualifications of members.

Science.gov (United States)

2010-10-01

... contract law. ... CONTRACT APPEALS BOARD OF CONTRACT APPEALS 6301.2 Qualifications of members. Each member of the Board must... administrative law judges appointed pursuant to section 3105 of title 5 of the United States Code, with the...

French nuclear plant safeguard pump qualification testing: EPEC test loop

International Nuclear Information System (INIS)

Guesnon, H.

1985-01-01

This paper reviews the specifications to which nuclear power plant safeguard pumps must be qualified, and surveys the qualification methods and program used in France to verify operability of the pump assembly and major pump components. The EPEC test loop is described along with loop capabilities and acheivements up to now. This paper shows, through an example, the Medium Pressure Safety Injection Pump designed for service in 1300 MW nuclear power plants, and the interesting possibilities offered by qualification testing

Intention and Normative Belief

OpenAIRE

Chislenko, Eugene

2016-01-01

I defend the view that we act “under the guise of the good.” More specifically, I argue that an intention to do something is a belief that one ought to do it. I show how conflicts in intention and belief, as well as more complex impairments in these states, account for the central problem cases: akrasia in belief and intention, apparently unintelligible choices, and lack of motivation or accidie.

Qualification of NDE personnel in the nuclear industry

International Nuclear Information System (INIS)

Epps, T.N.

1984-01-01

There has been evidence of ineffective programs for certifying nondestructive examination (NDE) personnel who conduct periodic inservice examinations in nuclear power plants under ASME Section XI Code requirements. This was brought to the attention of a group from the electric utility industry, the Electric Power Research Institute (EPRI), some NDE consultants and representatives from the American Society of Mechanical Engineers (ASME) by the Nuclear Regulatory Commission (NRC) in a May, 1982 meeting in Bethesda, Maryland. One problem pointed out by the NRC was the lack of a clear definition of qualification requirements for certification of NDE personnel who conduct ASME Section XI Inservice Inspection work in nuclear power plants. The NRC requested that the nuclear industry resolve this problem by formulating definitive qualification requirements for personnel certification that could be made an industry requirement. In June, 1982 the EPRI NDE Subcommittee held a general meeting for utility representatives to discuss the results of the May, 1982 meeting to develop a plan for industry response to the issue. The consensus was that an Ad Hoc Committee of utility representatives be convened to develop a document outlining qualification requirements for vertification of NDE personnel. The Ad Hoc Committee was formally convened on September 29, 1982

Overview of the IAEA's activity on ISI qualification

International Nuclear Information System (INIS)

Trampus, P.

2000-01-01

The IAEA Subprogram on Nuclear Power Planning, Implementation and Performance is presented. It's objective is to assist Member States in: planning nuclear power programmes in an integrated manner considering all necessary factors; systematically improving overall performance and competitiveness of NPPs trough entire service life with due regard to safety; applying technological/engineering best practices including QA/QM in all areas of nuclear power utilisation. International working group on life management of NPPs (IWG-LMNPP) has been established in 1975 with 26 Member States and 2 international organizations in order to provide the Director General with advice and opinions and the Member States with information, recommendations and support in life management issues.The technical co-operation program RER/4/020 'Advanced NDT of Primary Circuit Components' is presented.The pilot study is aimed to provide the participating Member States with practical advice how to apply the IAEA's qualification methodology. The target application is Technical Justification for UT of WWER-1000 RPV shell weld (unit 5 of 'Kozloduy NPP). The concept is to simulate the qualification process through assistance to establish qualification for a real NPP component, using real ISI, in a real regulatory environment. Interim results for Bulgaria are reported and further tasks are outlined

When fast logic meets slow belief: Evidence for a parallel-processing model of belief bias

OpenAIRE

Trippas, Dries; Thompson, Valerie A.; Handley, Simon J.

2016-01-01

Two experiments pitted the default-interventionist account of belief bias against a parallel-processing model. According to the former, belief bias occurs because a fast, belief-based evaluation of the conclusion pre-empts a working-memory demanding logical analysis. In contrast, according to the latter both belief-based and logic-based responding occur in parallel. Participants were given deductive reasoning problems of variable complexity and instructed to decide whether the conclusion was ...

Experience with the implementation of a risk-based ISI program and inspection qualification

International Nuclear Information System (INIS)

Chapman, O.J.V.

1996-01-01

Rolls Royce and Associates (RRA) are the Design Authority (DA) for Nuclear Steam Raising Plant (NSRP) used for the Royal Naval Nuclear Fleet. Over the past seven years RRA, with support from the Ministry of Defense, has developed and implemented a risk based in-service inspection (RBISI) strategy for the NSRP. Having used risk as a means of optimizing where to inspect, an inspection qualification (IQ) process has now been put in place to ensure that proposed inspections deliver the expected gains assumed. This qualification process follows very closely that currently being put forward by the European Network on Inspection Qualification (ENIQ)

Mock-up qualification and prototype manufacture for ITER current leads

Energy Technology Data Exchange (ETDEWEB)

Zhou, Tingzhi, E-mail: tingszhou@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); Lu, Kun; Ran, Qingxiang; Ding, Kaizhong; Feng, Hansheng; Wu, Huan; Liu, Chenglian; Song, Yuntao [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); Niu, Erwu [CNDA, Ministry of Science and Technology, Beijing (China); Bauer, Pierre; Devred, Arnaud [Magnet Division, ITER Organization, Cadarache (France)

2015-10-15

Highlights: • Vacuum brazing and electron beam welding qualification. • Machine and assembly strategy of fin type heat exchanger. • Soldering and joint resistance test of superconducting joint. • Pre-preg technology with vacuum bag on insulation. - Abstract: Three types of high temperature superconducting current leads (HTSCL) are designed to carry 68 kA, 55 kA or 10 kA to the ITER magnets. Before the supply of the HTS current lead series, the design and manufacturing process is qualified through mock-ups and prototypes. Seven mock-ups, representing the critical technologies of the current leads, were built and tested successfully in the Institute of Plasma Physics of the Chinese Academy of Sciences (ASIPP) in 2013. After the qualification some design features of the HTS leads were updated. This paper summarizes the qualification through mock-ups. In 2014 ASIPP started the manufacture of the prototypes. The preparation and manufacturing process are also described.

Technical basis for environmental qualification of microprocessor-based safety-related equipment in nuclear power plants

International Nuclear Information System (INIS)

Korsah, K.; Wood, R.T.; Hassan, M.; Tanaka, T.J.

1998-01-01

This document presents the results of studies sponsored by the Nuclear Regulatory Commission (NRC) to provide the technical basis for environmental qualification of computer-based safety equipment in nuclear power plants. The studies were conducted by Oak Ridge National Laboratory (ORNL), Sandia National Laboratories (SNL), and Brookhaven National Laboratory (BNL). The studies address the following: (1) adequacy of the present test methods for qualification of digital I and C systems; (2) preferred (i.e., Regulatory Guide-endorsed) standards; (3) recommended stressors to be included in the qualification process during type testing; (4) resolution of need for accelerated aging for equipment to be located in a benign environment; and (5) determination of an appropriate approach for addressing the impact of smoke in digital equipment qualification programs. Significant findings from the studies form the technical basis for a recommended approach to the environmental qualification of microprocessor-based safety-related equipment in nuclear power plants

Technical basis for environmental qualification of microprocessor-based safety-related equipment in nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Korsah, K.; Wood, R.T. [Oak Ridge National Lab., TN (United States); Hassan, M. [Brookhaven National Lab., Upton, NY (United States); Tanaka, T.J. [Sandia National Labs., Albuquerque, NM (United States)

1998-01-01

This document presents the results of studies sponsored by the Nuclear Regulatory Commission (NRC) to provide the technical basis for environmental qualification of computer-based safety equipment in nuclear power plants. The studies were conducted by Oak Ridge National Laboratory (ORNL), Sandia National Laboratories (SNL), and Brookhaven National Laboratory (BNL). The studies address the following: (1) adequacy of the present test methods for qualification of digital I and C systems; (2) preferred (i.e., Regulatory Guide-endorsed) standards; (3) recommended stressors to be included in the qualification process during type testing; (4) resolution of need for accelerated aging for equipment to be located in a benign environment; and (5) determination of an appropriate approach for addressing the impact of smoke in digital equipment qualification programs. Significant findings from the studies form the technical basis for a recommended approach to the environmental qualification of microprocessor-based safety-related equipment in nuclear power plants.

Seismic qualification testing at the National Engineering Laboratory

International Nuclear Information System (INIS)

Fairbairn, J.

1984-01-01

Servohydraulic shaker tables have been developed for the simulation of vibration environments including earthquakes. The use of these facilities for seismic qualification of nuclear equipment is described. (author)

Research program for seismic qualification of nuclear plant electrical and mechanical equipment. Task 3. Recommendations for improvement of equipment qualification methodology and criteria. Volume 3

International Nuclear Information System (INIS)

Kana, D.D.; Pomerening, D.J.

1984-08-01

The Research Program for Seismic Qualification of Nuclear Plant Electrical and Mechanical Equipment has spanned a period of three years and resulted in seven technical summary reports, each of which covered in detail the findings of different tasks and subtasks, and have been combined into five NUREG/CR volumes. Volume 3 presents recommendations for improvement of equipment qualification methodology and procedural clarification/modification. The fifth category identifies issues where adequate information does not exist to allow a recommendation to be made

Radiation Safety (Qualifications) Regulations 1980

International Nuclear Information System (INIS)

1980-01-01

These Regulations, promulgated pursuant to the provisions of the Radiation Safety Act, 1975-1979, require persons engaged in activities involving radiation to pass a radiation safety examination or to possess an approved qualification in radiation. The National Health and Medical Research Council is authorised to exempt persons from compliance with these requirements or, conversely, to impose such requirements on persons other than those designated. (NEA) [fr

Against Motivational Efficacy of Beliefs

Directory of Open Access Journals (Sweden)

Seungbae Park

2015-07-01

Full Text Available Danielle Bromwich (2010 argues that a belief is motivationally efficacious in that, other things being equal, it disposes an agent to answer a question in accordance with that belief. I reply that what we are disposed to do is largely determined by our genes, whereas what we believe is largely determined by stimuli from the environment. We have a standing and default disposition to answer questions honestly, ceteris paribus, even before we are exposed to environmental stimuli. Since this standing and default disposition is innate, and our beliefs have their source in environmental stimuli, our beliefs cannot be the source of the disposition. Moreover, a recent finding in neuroscience suggests that motivation is extrinsic to belief.

Underestimating belief in climate change

Science.gov (United States)

Jost, John T.

2018-03-01

People are influenced by second-order beliefs — beliefs about the beliefs of others. New research finds that citizens in the US and China systematically underestimate popular support for taking action to curb climate change. Fortunately, they seem willing and able to correct their misperceptions.

Narcissism and belief in the paranormal.

Science.gov (United States)

Roe, Chris A; Morgan, Claire L

2002-04-01

The present study was designed to assess whether the relationship between narcissistic personality and paranormal belief identified by Tobacyk and Mitchell earlier could be replicated with a general population and to see whether the effect could be found with a narrower definition of paranormal beliefs that focuses only on belief in psychic phenomena. 75 participants completed the Narcissistic Personality Inventory and two measures of paranormal belief, the Paranormal Belief Scale and the Australian Sheep-Goat Scale. There was no correlation between narcissism and Paranormal Belief Scale scores, but narcissism and Australian Sheep-Goat Scale scores were significantly positively correlated. Of the three subscales to the Australian Sheep-Goat measure, scores for narcissism correlated with belief in ESP and PK but not in Life after death. These relationships were interpreted in terms of need for control.

78 FR 44873 - Pilot Certification and Qualification Requirements for Air Carrier Operations; Correction

Science.gov (United States)

2013-07-25

...-0100; Amdt. Nos. 61-130A] RIN 2120-AJ67 Pilot Certification and Qualification Requirements for Air... to create new certification and qualification requirements for pilots in air carrier operations. This... . SUPPLEMENTARY INFORMATION: Background On July 15, 2013, the FAA published a final rule entitled, ``Pilot...

Assessment of Electro-Mechanic Technician Qualifications in the Context of European Transparency Tools

Science.gov (United States)

Ozcan, Mustafa; Vuranok, Turan Tolga; Ball, Claudia

2017-01-01

Purpose: This study explores the applicability and transferability of tools developed for the realization of comparability and transparency of qualifications across Europe. It relates to the implementation of the European Credit System for Vocational Education and Training (ECVET) and the European Qualifications Framework (EQF) in the automotive…

Developing a Qualifications Structure for the Finance Services Industry in Malaysia and Beyond

Science.gov (United States)

Manshor, Amat Taap; Chong, Siong Choy; Cameron, Roslyn

2014-01-01

The development of qualifications systems and frameworks assists in promoting lifelong learning and work-based recognition systems. Several nations in the Asian Pacific region have established national qualifications frameworks across their respective educational sectors (e.g., Australia, New Zealand, Hong Kong, Malaysia and the Philippines),…

Attitudes and beliefs as verbal behavior

OpenAIRE

Guerin, Bernard

1994-01-01

Attitudes and beliefs are analyzed as verbal behavior. It is argued that shaping by a verbal community is an essential part of the formation and maintenance of both attitudes and beliefs, and it is suggested that verbal communities mediate the important shift in control from events in the environment (attitudes and beliefs as tacts) to control by other words (attitudes and beliefs as intraverbals). It appears that both attitudes and beliefs are constantly being socially negotiated through aut...

Survey of NDT techniques, services, qualifications and certification of NDT personnel-preliminary results

International Nuclear Information System (INIS)

Aleta, C.R.; Kinilitan, V.E.; Lailo, R.M.

1987-01-01

This paper presented the results of a survey conducted to determine the profile of the NDT industry including its problems. A questionnaire designed in three parts 1) present practices on qualification and certification, 2) NDT equipment and 3) services and problems in NDT. Of the 36 firms contacted only 20 responded. Results indicated the following: a) most firms are engaged in four (4) main techniques, RT, UT, MT and PT. Only 2 indicated capability of ET. b) level III personnel are relatively few in number, c) most firms allow the ASNT recommendation as a basis for their qualifications and certification and are in favor of standardization of the qualification and certification process and supportive of a national center for training of NDT personnel and d) most firms perceived the lack of adequate repair/maintenance skills/facilities, followed by high cost of equipment and the lack of national standard for qualification and certification. (ELC)

Requirements for qualification of manufacture of the ITER Central Solenoid and Correction Coils

Energy Technology Data Exchange (ETDEWEB)

Libeyre, Paul, E-mail: paul.libeyre@iter.org [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul lez Durance (France); Li, Hongwei [ITER China, 15B Fuxing Road, Beijing 100862 (China); Reiersen, Wayne [US ITER Project Office, 1055 Commerce Park Dr., Oak Ridge, TN 37831 (United States); Dolgetta, Nello; Jong, Cornelis; Lyraud, Charles; Mitchell, Neil; Laurenti, Adamo [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul lez Durance (France); Sgobba, Stefano [CERN, CH-1211 Genève 23 (Switzerland); Turck, Bernard [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul lez Durance (France); Martovetsky, Nicolai; Everitt, David; Freudenberg, K.; Litherland, Steve; Rosenblad, Peter [US ITER Project Office, 1055 Commerce Park Dr., Oak Ridge, TN 37831 (United States); Smith, John; Spitzer, Jeff [General Atomics, P.O. Box 85608, San Diego, CA 92186-5608 (United States); Wei, Jing; Dong, Xiaoyu; Fang, Chao [ASIPP, Shushan Hu Road 350, Hefei, Anhui 230031 (China); and others

2015-10-15

Highlights: • A manufacturing line is installed for the ITER Correction Coils. • A manufacturing line is under installation for the ITER Central Solenoid. • Qualification of the manufacturing procedures has started for both manufacturing lines and acceptance criteria set. • Winding procedure of Correction Coils is qualified. - Abstract: The manufacturing line of the ITER Correction Coils (CC) at ASIPP in Hefei (China) was completed in 2013 and the manufacturing line of the ITER Central Solenoid (CS) modules is under installation at General Atomic premises in Poway (USA). In both cases, before starting production of the first coils, qualification of the manufacturing procedures is achieved by the construction of a set of mock-ups and prototypes to demonstrate that design requirements defined by the ITER Organization are effectively met. For each qualification item, the corresponding mock-ups are presented with the tests to be performed and the related acceptance criteria. The first qualification results are discussed.

The recertification of the professional accounting qualification in Estonia: the requirements and quality of CPD

Directory of Open Access Journals (Sweden)

Kaidi Kallaste

2017-09-01

Full Text Available The recertification of the professional accounting qualification in Estonia: the requirements and quality of CPD As the purpose of a professional qualification should be to ensure quality to employers/customers, appro-priate requirements for professional training should not be too low. On the other hand, too high require-ments for the amount of training would lead to the situation where maintaining the level is expensive and if the labour market does not consider having a professional certificate necessary, recertification will be discarded. The purpose of the research was to identify the factors that influence an accountant’s decision whether to recertify his/her professional qualification or not. The conditions of recertification were ana-lysed and compared to other countries as were the requirements set up for auditors. The results of the survey revealed that in Estonia the decision not to recertify one’s professional qualification was mainly due to not having fulfilled the required number of qualification hours or not having certificates proving one’s participation in qualification training sessions. At the same time, compared to other countries, the requirements in Estonia are very low. So that the increase in the amount of training would not hinder recertification, alternative solutions for Estonia are proposed in the article.

Perceived parental beliefs about the causes of success in sport: relationship to athletes' achievement goals and personal beliefs.

Science.gov (United States)

White, Sally A; Kavussanu, Maria; Tank, Kari M; Wingate, Jason M

2004-02-01

This study examined the relationship between perceived parental beliefs and young athletes' achievement goal orientations and personal beliefs about the causes of success in sport. Participants were 183 male and female athletes, 11-18 years old, involved in team sports. Athletes completed the Task and Ego Orientation in Sport Questionnaire, the Beliefs about the Causes of Sport Success Questionnaire, and two modified versions of the latter inventory to assess their perceptions of their parents' beliefs. Canonical correlation analysis revealed that perceived parental beliefs were related to goal orientations and personal beliefs in a conceptually coherent fashion. Thus, the perceived parental belief that effort leads to success in sport was related to athletes' task orientation and personal belief that effort causes sport success. In contrast, the perceived parental beliefs that superior ability, external factors, and using deceptive tactics are precursors to success in sport corresponded to athletes' ego orientation and the same personal beliefs. The findings are discussed in terms of their implications for understanding the socialization experiences of young athletes.

Nuclear EQ sourcebook: A compilation of documents for nuclear equipment qualification

International Nuclear Information System (INIS)

Anon.

1992-01-01

In the nuclear power industry, environmental and seismic qualification of safety-related electrical and instrumentation equipment is collectively known as Equipment Qualification (EQ). Related technology, as well as regulatory requirements, have evolved rapidly during the last 15 years. For environmental qualification, what began in 1971 with one trial-use guide (IEEE Std 323-1971), now stands as a full complement of Nuclear Regulatory Commission (NRC) rules, guides and industry standards. In addition to the Institute of Electrical and Electronics Engineers (IEEE), the American Society of Mechanical Engineers (ASME) has also undertaken development of its own set of standards for use in qualifying safety-related mechanical equipment. To ensure that the original design and qualification is preserved, engineers need to select and use the correct set of NRC regulations, regulatory guides, industry standards, and generic correspondence. Given that the total number of these documents exceed 200, this task becomes resource intensive. This compilation is the first known publication available to serve the user-community need for a complete and exhaustive single source. Approximately 180 items (Bulletins, Federal Rules, Generic Letters, Notices, Regulatory Guides, IEEE Standards, IEEE Recommended Practices, and IEEE Guides) have been processed separately for inclusion on the data base

Security of social network credentials for accessing course portal: Users' experience

Science.gov (United States)

Katuk, Norliza; Fong, Choo Sok; Chun, Koo Lee

2015-12-01

Social login (SL) has recently emerged as a solution for single sign-on (SSO) within the web and mobile environments. It allows users to use their existing social network credentials (SNC) to login to third party web applications without the need to create a new identity in the intended applications' database. Although it has been used by many web application providers, its' applicability in accessing learning materials is not yet fully investigated. Hence, this research aims to explore users' (i.e., instructors' and students') perception and experience on the security of SL for accessing learning contents. A course portal was developed for students at a higher learning institution and it provides two types of user authentications (i) traditional user authentication, and (ii) SL facility. Users comprised instructors and students evaluated the login facility of the course portal through a controlled lab experimental study following the within-subject design. The participants provided their feedback in terms of the security of SL for accessing learning contents. The study revealed that users preferred to use SL over the traditional authentication, however, they concerned on the security of SL and their privacy.

The Making of Paranormal Belief: History, Discourse Analysis and the Object of Belief

OpenAIRE

White, Lewis

2013-01-01

The present study comprises a discursive analysis of a cognitive phenomenon, paranormal beliefs. A discursive psychological approach to belief highlights that an important component of the cognitivist work has been how the object of paranormal belief has been defined in formal study. Using discourse analysis, as developed as a method in the history of psychology, this problem is explored through analysis of published scales. The findings highlight three rhetorical themes that are deployed in ...

Hanford Tank Waste Treatment and Immobilization Plant (WTP) Waste Feed Qualification Program Development Approach - 13114

Energy Technology Data Exchange (ETDEWEB)

Markillie, Jeffrey R.; Arakali, Aruna V.; Benson, Peter A.; Halverson, Thomas G. [Hanford Tank Waste Treatment and Immobilization Plant Project, Richland, WA 99354 (United States); Adamson, Duane J.; Herman, Connie C.; Peeler, David K. [Savannah River National Laboratory, Aiken, SC 29808 (United States)

2013-07-01

The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is a nuclear waste treatment facility being designed and constructed for the U.S. Department of Energy by Bechtel National, Inc. and subcontractor URS Corporation (under contract DE-AC27-01RV14136 [1]) to process and vitrify radioactive waste that is currently stored in underground tanks at the Hanford Site. A wide range of planning is in progress to prepare for safe start-up, commissioning, and operation. The waste feed qualification program is being developed to protect the WTP design, safety basis, and technical basis by assuring acceptance requirements can be met before the transfer of waste. The WTP Project has partnered with Savannah River National Laboratory to develop the waste feed qualification program. The results of waste feed qualification activities will be implemented using a batch processing methodology, and will establish an acceptable range of operator controllable parameters needed to treat the staged waste. Waste feed qualification program development is being implemented in three separate phases. Phase 1 required identification of analytical methods and gaps. This activity has been completed, and provides the foundation for a technically defensible approach for waste feed qualification. Phase 2 of the program development is in progress. The activities in this phase include the closure of analytical methodology gaps identified during Phase 1, design and fabrication of laboratory-scale test apparatus, and determination of the waste feed qualification sample volume. Phase 3 will demonstrate waste feed qualification testing in support of Cold Commissioning. (authors)

IEEE standard for design qualification of safety systems equipment used in nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1980-01-01

This standard is written to serve as a general standard for qualification of all types of safety systems equipment, mechanical and instrumentation as well as electrical. It also establishes principles and procedures to be followed in preparing specific safety systems equipment standards. Guidance for qualifying specific safety systems equipment may be found in various specific equipment qualification standards that are now available or are being prepared. It is required that safety systems equipment in nuclear power generating stations meet or exceed its performance requirements throughout its installed life. This is accomplished by a disciplined program of design qualification and quality assurance of design, production, installation, maintenance and surveillance. This standard is for the design qualification section of the program only. Design qualification is intended to demonstrate the capability of the equipment design to perform its safety function(s) over the expected range of normal, abnormal, design basis event, post design basis event, and in-service test conditions. Inherent to design qualification is the requirement for demonstration, within limitations afforded by established technical state-of-the-art, that in-service aging throughout the qualified life established for the equipment will not degrade safety systems equipment from its original design condition to the point where it cannot perform its required safety function(s), upon demand. The above requirement reflects the primary role of design qualification to provide reasonable assurance that design- and age-related common failure modes will not occur during performance of safety function(s) under postulated service conditions

Erosion of belief and disbelief: effects of religiosity and negative affect on beliefs in the paranormal and supernatural.

Science.gov (United States)

Beck, R; Miller, J P

2001-04-01

The authors investigated the effects of religiosity and negative affect on beliefs in the paranormal and supernatural among 94 undergraduate students enrolled in psychology classes at a small, private U.S. university. They hypothesized that religiosity would predict differential beliefs in the supernatural versus the paranormal but that negative affect would attenuate these beliefs. In addition, the authors predicted that belief in the supernatural and negative affect would interact to predict belief in the paranormal. Overall, the results were consistent with predictions. The religious participants were skeptical of paranormal phenomena but were accepting of supernatural phenomena. In addition, increased reports of negative affect over the preceding year appeared to attenuate belief in the supernatural for the religious participants. By contrast, for the nonreligious participants, increased belief in both the supernatural and paranormal was predicted when reports of negative affect were high. Finally, the interaction of supernatural belief and negative affect significantly predicted belief in the paranormal.

Qualifications and ethics education: the views of ICT professionals

Directory of Open Access Journals (Sweden)

Yeslam Al-Saggaf

2017-11-01

Full Text Available Do information and communications technology (ICT professionals who have ICT qualifications believe that the ethics education they received as part of their ICT degrees helped them recognise ethical problems in the workplace and address them? If they do, are they also influenced by their personal ethics? What else helps them recognise ethical problems in the workplace and address them? And what are their views in relation to the impact of ethics education on professionalism in the ICT workplace? A quantitative survey of 2,315 Australian ICT professionals revealed that participants who reported having various levels of qualifications found ethics education or training, to a small degree, helpful for recognising ethical problems and addressing them; although it is those with Non-ICT qualifications, not those with ICT degrees, who were influenced more by ethics education or training. This suggests that educators need to consider how to better prepare ICT graduates for the workplace challenges and the types of situations they subsequently experience. The survey also found that participants who reported having various levels of qualifications were not influenced by their personal ethics or indeed any other factor making ethics education or training important for developing professionalism. The quantitative survey was followed by qualitative interviews with 43 Australian ICT professionals in six Australian capital cities. These interviews provided further empirical evidence that ethics education is crucial for enabling ICT professionals to recognise ethical problems and resolve them and that educators need to consider how to better prepare ICT graduates for the types of moral dilemmas that they are likely going to face in the workforce.

Methodology for LOCA analysis and its qualification procedures for PWR reload licensing

International Nuclear Information System (INIS)

Serrano, M.A.B.

1986-01-01

The methodology for LOCA analysis developed by FURNAS and its qualification procedure for PWR reload licensing are presented. Digital computer codes developed by NRC and published collectively as the WREM package were modified to get versions that comply to each requirement of Brazilian Licensing Criteria. This metodology is applied to Angra-1 basic case to conclude the qualification process. (Author) [pt

Code qualification of structural materials for AFCI advanced recycling reactors.

Energy Technology Data Exchange (ETDEWEB)

Natesan, K.; Li, M.; Majumdar, S.; Nanstad, R.K.; Sham, T.-L. (Nuclear Engineering Division); (ORNL)

2012-05-31

This report summarizes the further findings from the assessments of current status and future needs in code qualification and licensing of reference structural materials and new advanced alloys for advanced recycling reactors (ARRs) in support of Advanced Fuel Cycle Initiative (AFCI). The work is a combined effort between Argonne National Laboratory (ANL) and Oak Ridge National Laboratory (ORNL) with ANL as the technical lead, as part of Advanced Structural Materials Program for AFCI Reactor Campaign. The report is the second deliverable in FY08 (M505011401) under the work package 'Advanced Materials Code Qualification'. The overall objective of the Advanced Materials Code Qualification project is to evaluate key requirements for the ASME Code qualification and the Nuclear Regulatory Commission (NRC) approval of structural materials in support of the design and licensing of the ARR. Advanced materials are a critical element in the development of sodium reactor technologies. Enhanced materials performance not only improves safety margins and provides design flexibility, but also is essential for the economics of future advanced sodium reactors. Code qualification and licensing of advanced materials are prominent needs for developing and implementing advanced sodium reactor technologies. Nuclear structural component design in the U.S. must comply with the ASME Boiler and Pressure Vessel Code Section III (Rules for Construction of Nuclear Facility Components) and the NRC grants the operational license. As the ARR will operate at higher temperatures than the current light water reactors (LWRs), the design of elevated-temperature components must comply with ASME Subsection NH (Class 1 Components in Elevated Temperature Service). However, the NRC has not approved the use of Subsection NH for reactor components, and this puts additional burdens on materials qualification of the ARR. In the past licensing review for the Clinch River Breeder Reactor Project (CRBRP

Investigation on legislation necessity of qualification of quality assurance auditors for civilian nuclear components

International Nuclear Information System (INIS)

Zhu Hong

2004-01-01

The paper discusses the actual state and legislation necessity of administration for qualification of quality assurance auditors engaging in nuclear component activities in our country, and presents the tentative idea for establishing qualification system of quality assurance auditors. (author)

Homo economicus belief inhibits trust.

Directory of Open Access Journals (Sweden)

Ziqiang Xin

Full Text Available As a foundational concept in economics, the homo economicus assumption regards humans as rational and self-interested actors. In contrast, trust requires individuals to believe partners' benevolence and unselfishness. Thus, the homo economicus belief may inhibit trust. The present three experiments demonstrated that the direct exposure to homo economicus belief can weaken trust. And economic situations like profit calculation can also activate individuals' homo economicus belief and inhibit their trust. It seems that people's increasing homo economicus belief may serve as one cause of the worldwide decline of trust.

Homo Economicus Belief Inhibits Trust

Science.gov (United States)

Xin, Ziqiang; Liu, Guofang

2013-01-01

As a foundational concept in economics, the homo economicus assumption regards humans as rational and self-interested actors. In contrast, trust requires individuals to believe partners’ benevolence and unselfishness. Thus, the homo economicus belief may inhibit trust. The present three experiments demonstrated that the direct exposure to homo economicus belief can weaken trust. And economic situations like profit calculation can also activate individuals’ homo economicus belief and inhibit their trust. It seems that people’s increasing homo economicus belief may serve as one cause of the worldwide decline of trust. PMID:24146907

Hanford Waste Vitrification Plant Project Waste Form Qualification Program Plan

International Nuclear Information System (INIS)

Randklev, E.H.

1993-06-01

The US Department of Energy has created a waste acceptance process to help guide the overall program for the disposal of high-level nuclear waste in a federal repository. This Waste Form Qualification Program Plan describes the hierarchy of strategies used by the Hanford Waste Vitrification Plant Project to satisfy the waste form qualification obligations of that waste acceptance process. A description of the functional relationship of the participants contributing to completing this objective is provided. The major activities, products, providers, and associated scheduling for implementing the strategies also are presented

Paranormal beliefs of Latvian college students: a Latvian version of the revised paranormal belief scale.

Science.gov (United States)

Utinans, A; Ancane, G; Tobacyk, J J; Boyraz, G; Livingston, M M; Tobacyk, J S

2015-02-01

A Latvian version of the Revised Paranormal Belief Scale (RPBS) was completed by 229 Latvian university students. Exploratory and confirmatory factor analyses revealed six relatively independent factors labeled Magical Abilities, Psychokinesis, Traditional Religious Belief, Superstition, Spirit Travel, and Extraordinary Life Forms. Based on the motivational-control model, it was hypothesized that the societal stressors affecting Latvian society during the last 50 yr. have led to a reduced sense of personal control which, in turn, has resulted in increased endorsement of paranormal beliefs to re-establish a sense of control. The motivational-control hypothesis was not supported. Results indicated that (except for Traditional Religious Belief in women), the majority of these students were disbelievers in paranormal phenomena. As hypothesized, Latvian women reported significantly greater paranormal belief than men.

Teacher Beliefs and Technology Integration

Science.gov (United States)

Kim, ChanMin; Kim, Min Kyu; Lee, Chiajung; Spector, J. Michael; DeMeester, Karen

2013-01-01

The purpose of this exploratory mixed methods study was to investigate how teacher beliefs were related to technology integration practices. We were interested in how and to what extent teachers' (a) beliefs about the nature of knowledge and learning, (b) beliefs about effective ways of teaching, and (c) technology integration practices were…

U-Mo fuel qualification program in HANARO

International Nuclear Information System (INIS)

Lee, K.H.; Lee, C.S.; Kim, H.R.; Kuk, I.H.; Kim, C.K.

2000-01-01

Atomized U-Mo fuel has shown good performance from the results of previous out-of-pile tests and post-irradiation examinations. A qualification program of rod type U-Mo fuel is in progress and the fuel will be irradiated in HANARO. 6 gU/cm 3 U-7Mo, U-8Mo and U-9Mo are considered in this program. The laboratory test results of porosity, mechanical property, thermal conductivity, and thermal compatibility test are discussed in this paper. In parallel with this qualification program, the feasibility study on the core conversion from the present U 3 Si fuel to U-Mo in HANARO will be initiated to provide technical bases for the policy making. Several options of core conversion for HANARO are proposed and each option will be addressed briefly in terms of the operation policy, fuel management, and licensing of HANARO. (author)

Non-destructive testing. The current state of standards and qualification and certification for leak testing

International Nuclear Information System (INIS)

Tamura, Yoshikazu

2011-01-01

Domestic standards of the leak testing are enacted as one of Japan Industrial Standards. The conformity is advanced between these domestic standards and ISO (International Organization for Standardization) standard. ISO9712 (Non-destructive testing-Qualification and certification of personnel) was revised to include the leak testing of qualification and certification in 2005. The preparation working group of qualification and certification for leak testing is planning start aiming at the system in one and a half years. (author)

26 CFR 20.6036-2 - Notice of qualification as executor of estate of decedent dying after 1970.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 14 2010-04-01 2010-04-01 false Notice of qualification as executor of estate... AUGUST 16, 1954 Procedure and Administration § 20.6036-2 Notice of qualification as executor of estate of... special notice of qualification as executor of an estate is required to be filed. The requirement of...

Qualification test for ITER HCCR-TBS mockups with high heat flux test facility

Energy Technology Data Exchange (ETDEWEB)

Kim, Suk-Kwon, E-mail: skkim93@kaeri.re.kr [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Park, Seong Dae; Jin, Hyung Gon; Lee, Eo Hwak; Yoon, Jae-Sung; Lee, Dong Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Cho, Seungyon [National Fusion Research Institute, Daejeon (Korea, Republic of)

2016-11-01

Highlights: • The test mockups for ITER HCCR (Helium Cooled Ceramic Reflector) TBS (Test Blanket System) in Korea were designed and fabricated. • A thermo-hydraulic analysis was performed using a high heat flux test facility by using electron beam. • The plan for qualification tests was developed to evaluate the thermo-hydraulic efficiency in accordance with the requirements of the ITER Organization. - Abstract: The test mockups for ITER HCCR (Helium Cooled Ceramic Reflector) TBS (Test Blanket System) in Korea were designed and fabricated, and an integrity and thermo-hydraulic performance test should be completed under the same or similar operation conditions of ITER. The test plan for a thermo-hydraulic analysis was developed by using a high heat flux test facility, called the Korean heat load test facility by using electron beam (KoHLT-EB). This facility is utilized for a qualification test of the plasma facing component (PFC) for the ITER first wall and DEMO divertor, and for the thermo-hydraulic experiments. In this work, KoHLT-EB will be used for the plan of the performance qualification test of the ITER HCCR-TBS mockups. This qualification tests should be performed to evaluate the thermo-hydraulic efficiency in accordance with the requirements of the ITER Organization (IO), which describe the specifications and qualifications of the heat flux test facility and test procedure for ITER PFC.

Entrance Qualifications Affect the Performance of Nutrition Students at University: A Pilot Study

Science.gov (United States)

Owusu-Apenten, Richard; Xu, Wen Li

2012-01-01

This study assessed the effect of admissions qualifications on the subsequent academic performances of BSc nutrition students at a UK university. Entrance qualifications for three groups (Grp01, Grp02, Grp03) reading for a BSc(Hons) degree in, Dietetics, Food & Nutrition or Human Nutrition (n = 105) were determined from their UCAS…

[Additional qualification in health economics--a pre-condition for ENT leadership positions?].

Science.gov (United States)

Lehnerdt, G; Schöffski, O; Mattheis, S; Hoffmann, T K; Lang, S

2013-11-01

The increasing medical-technical progress as well as the dramatic demographic changes cause problems with regard to rapid enlargement of medical service offers, allocation of resources and a financing shortfall in the German public health system. The economization in the German Health System can also be perceived in ENT departments. After performing an internet search about the rapidly growing market for qualifications measures in health economics, we hence conducted an anonymous survey for ENT senior doctors and directors of the 34 German University Departments to evaluate their attitude towards, as well as their expectation of such an add-on qualification. Since the German government finalized the health care reform in the year 2000 such qualification measures rapidly developed: amongst others, 26 postgraduate, extra-occupational master programs have been inaugurated. The anonymous survey was answered by 105 ENT doctors (63 senior doctors, 27 vice professors and 15 directors). 63% out of these 105 colleagues considered such an add-on qualification to be mandatory. 41% of the colleagues were already "add-on qualified" in that field, only 10 of them by means of a study program. 71 of 105 colleagues (68%) considered the add-on qualification to be advantageous for their future personal career. With regard to the designated contents of the study program, "Staff Management" was even prioritized to "Hospital Financing" and "Cost Accounting". Aspects of management and a (health-) economical basic knowledge became an integral part of the daily routine for "first-line management doctors" also in (University) ENT-departments. © Georg Thieme Verlag KG Stuttgart · New York.

76 FR 9376 - Proposed Extension of Existing Information Collection on Qualification/Certification Program and...

Science.gov (United States)

2011-02-17

... Extension of Existing Information Collection on Qualification/Certification Program and Man Hoist Operators... 77.107-1 on Qualification/Certification Program and Man Hoist Operators Physical Fitness. DATES: All... Labor or Secretary of Health and Human Services must make frequent inspections and investigations in...

Are essentialist beliefs associated with prejudice?

Science.gov (United States)

Haslam, Nick; Rothschild, Louis; Ernst, Donald

2002-03-01

Gordon Allport (1954) proposed that belief in group essences is one aspect of the prejudiced personality, alongside a rigid, dichotomous and ambiguity-intolerant cognitive style. We examined whether essentialist beliefs-beliefs that a social category has a fixed, inherent, identity-defining nature-are indeed associated in this fashion with prejudice towards black people, women and gay men. Allport's claim, which is mirrored by many contemporary social theorists, received partial support but had to be qualified in important respects. Essence-related beliefs were associated strongly with anti-gay attitudes but only weakly with sexism and racism, and they did not reflect a cognitive style that was consistent across stigmatized categories. When associations with prejudice were obtained, only a few specific beliefs were involved, and some anti-essentialist beliefs were associated with anti-gay attitudes. Nevertheless, the powerful association that essence-related beliefs had with anti-gay attitudes was independent of established prejudice-related traits, indicating that they have a significant role to play in the psychology of prejudice.

How psychotic-like are paranormal beliefs?

Science.gov (United States)

Cella, Matteo; Vellante, Marcello; Preti, Antonio

2012-09-01

Paranormal beliefs and Psychotic-like Experiences (PLE) are phenotypically similar and can occur in individuals with psychosis but also in the general population; however the relationship of these experiences for psychosis risk is largely unclear. This study investigates the association of PLE and paranormal beliefs with psychological distress. Five hundred and three young adults completed measures of paranormal beliefs (Beliefs in the Paranormal Scale), psychological distress (General Health Questionnaire), delusion (Peters et al. Delusions Inventory), and hallucination (Launay-Slade Hallucination Scale) proneness. The frequency and intensity of PLE was higher in believers in the paranormal compared to non-believers, however psychological distress levels were comparable. Regression findings confirmed that paranormal beliefs were predicted by delusion and hallucination-proneness but not psychological distress. The use of a cross-sectional design in a specific young adult population makes the findings exploratory and in need of replication with longitudinal studies. The predictive value of paranormal beliefs and experiences for psychosis may be limited; appraisal or the belief emotional salience rather than the belief per se may be more relevant risk factors to predict psychotic risk. Copyright © 2012 Elsevier Ltd. All rights reserved.

The utilization of VUJE specialists non-destructive testing qualification at international cooperation with company TECNATOM

International Nuclear Information System (INIS)

Kuna, M.

2006-01-01

The utilization of VUJE specialists non-destructive testing qualification at cooperation with company TECNATOM. The obtain of QDA qualification for ET examination for possibility of qualified evaluation in the foreign NPP (USA, Brazil). The acquired practical experiences by evaluation of ET data from NPP Angra Brazil and Waltz Mill USA. The obtain of SNT-TC-1A and EPRI qualification for the UT evaluation of penetration tube welds measurements. The practical experience during the measurement on NPP Shearon Harris (Author)

Manual on training, qualification and certification of quality assurance personnel

International Nuclear Information System (INIS)

1986-01-01

The Manual is applicable to those participants in a nuclear power project who are associated with establishment and implementation of the various quality assurance (QA) programmes during the life cycle of the project. It provides examples of typical QA functions to be undertaken and the associated qualification requirements, training programmes, training techniques and methods of certification of personnel implementing these functions. The necessary qualification and training requirements and practices for QA personnel are dependent primarily on the functions or activities to be performed. The two main functions of the QA unit noted previously as (a) ensuring QA programme establishment and execution and (b) verifying that activities have been correctly performed have been found in practice to require different qualifications and training of personnel. Therefore, for the purpose of this Manual the QA personnel may be classified in two groups who perform: QA programmatic and evaluation functions; Inspection and test functions. These titles do not necessarily represent separate or individual organizational groups or units and may be composed of one or of several different organizations

Agency Beliefs Over Time and Across Cultures: Free Will Beliefs Predict Higher Job Satisfaction

Science.gov (United States)

Feldman, Gilad; Farh, Jiing-Lih; Wong, Kin Fai Ellick

2017-01-01

In three studies, we examined the relationship between free will beliefs and job satisfaction over time and across cultures. Study 1 examined 252 Taiwanese real-estate agents over a 3-months period. Study 2 examined job satisfaction for 137 American workers on an online labor market over a 6-months period. Study 3 extended to a large sample of 14,062 employees from 16 countries and examined country-level moderators. We found a consistent positive relationship between the belief in free will and job satisfaction. The relationship was above and beyond other agency constructs (Study 2), mediated by perceived autonomy (Studies 2-3), and stronger in countries with a higher national endorsement of the belief in free will (Study 3). We conclude that free-will beliefs predict outcomes over time and across cultures beyond other agency constructs. We call for more cross-cultural and longitudinal studies examining free-will beliefs as predictors of real-life outcomes. PMID:29191084

Belief, hope and faith.

Science.gov (United States)

Figueiredo, Luis Claudio

2004-12-01

A case of hysteria is presented in order to create a frame of reference for the author's approach to the concepts of hope, belief and faith. A difference between hope as a 'sad passion' (which is here called regressive hope) and hope as a principle of mental functioning is established. The concept of hope will at first always be based on beliefs--either beliefs organised in the paranoid-schizoid position (called here fragmented and delusional beliefs)--or those organised from the depressive position (complex systems of beliefs, which end up being dogmatic); the latter typically occur in neurotics. It is suggested here that there is another possibility for hope, which is based on faith. The meaning of faith is considered here externally to the religious sense. The solid establishment of hope as a principle--based on faith--can be viewed as responsible for the opening up of creative potentials and as one of the main aims of analysis. Such an aim, however requires the establishment of a deep relationship, both in theory and in clinical practice, between the Kleinian question of the depressive position and the Freudian question of the Oedipus complex.

[Authorized Qualifications of Staff Conducting Examinations in the Field of Clinical Microbiology].

Science.gov (United States)

Nishiyama, Hiroyuki

2015-04-01

Because of the increase in healthcare-associated infections, appearance of highly resistant bacteria, and that of emerging/re-emerging infectious diseases, it is necessary for the skills of clinical microbiological technologists and the associated technology to be improved. Technologist in Microbiology (4,717 certified) and Specialist in Microbiology (58 certified) are authorized qualifications in the field of examination for clinical microbiology, with a history of 60 years, and Clinical Microbiological Technologist (670 certified) and Infection Control Microbiological Technologist (ICMT) (528 certified) are necessary qualifications to become a member of an infection control team. As problems to be resolved, clarifying the relationships among the authorized qualifications, reconsidering the fairness of evaluating written examinations, and further consideration of the administration method for an increasing number of examinees need to be tackled.

Effects of Epistemological Beliefs and Topic-Specific Beliefs on Undergraduates' Cognitive and Strategic Processing of Dual-Positional Text.

Science.gov (United States)

Kardash, CarolAnne M.; Howell, Karen L.

2000-01-01

Investigates effects of epistemological beliefs and topic-specific beliefs on undergraduates' (N=40) cognitive and strategic processing of a dual-positional text. Findings reveal that epistemological beliefs about the speed of learning affected the overall number of cognitive processes exhibited, whereas topic-specific beliefs interacted with the…

Accreditation of qualification testing organizations: the industry viewpoint

International Nuclear Information System (INIS)

Roby, A.

1983-01-01

This paper presents the industry viewpoint on the program for the Accreditation of Qualification Testing Organizations, which has been proposed for rulemaking by the Nuclear Regulatory Commission. The IEEE has agreed to establish the program content, and would administer its requirements in accordance with an agreement between the NRC and IEEE of September 30th, 1981. Presented in this paper is the industry perspective, developed and prepared through the AIF, identifying the serious concerns which the accreditation program has raised. Discussed are the disadvantages of the program and those present benefits which would be lost if the program was adopted. The value of greater emphasis on current regulation to improve the qualification process is presented and the paper details areas where the NRC proposals do not provide adequate justification for the accreditation program