WorldWideScience

Sample records for qualification range scoring

  1. Exploring a Source of Uneven Score Equity across the Test Score Range

    Science.gov (United States)

    Huggins-Manley, Anne Corinne; Qiu, Yuxi; Penfield, Randall D.

    2018-01-01

    Score equity assessment (SEA) refers to an examination of population invariance of equating across two or more subpopulations of test examinees. Previous SEA studies have shown that score equity may be present for examinees scoring at particular test score ranges but absent for examinees scoring at other score ranges. No studies to date have…

  2. Final qualification of an industrial wide range neutron instrumentation in the Osiris MTR reactor

    Energy Technology Data Exchange (ETDEWEB)

    Barbot, L.; Normand, S. [CEA, LIST, Laboratoire Capteur et Architectures Electroniques, F-91191 Gif Sur Yvette (France); Pasdeloup, P. [AREVA TA, Controle Commande and Mesures, F-13762 Les Milles (France); Lescop, B. [CEA, INSTN, UEIN, F-91191 Gif Sur Yvette (France)

    2009-07-01

    This work deals with the final qualification of the IRINA in-core neutron flux measurement system in the MTR Osiris reactor. A specific irradiation device has been set up to validate the last changes in the complete system (electronic, transmitting cable and monitor). Experimental results show the IRINA measurement system meet entirely the in-core reactor conditions requirements: a thermal neutron flux from 10{sup 7} n.cm{sup -2}.s{sup -1} up to 10{sup 14} n.cm{sup -2}.s{sup -1} and a temperature of 300 C degrees during a minimum operating time of 1000 hours. (authors)

  3. Qualification of a Plant Disease Simulation Model: Performance of the LATEBLIGHT Model Across a Broad Range of Environments.

    Science.gov (United States)

    Andrade-Piedra, Jorge L; Forbes, Gregory A; Shtienberg, Dani; Grünwald, Niklaus J; Chacón, María G; Taipe, Marco V; Hijmans, Robert J; Fry, William E

    2005-12-01

    ABSTRACT The concept of model qualification, i.e., discovering the domain over which a validated model may be properly used, was illustrated with LATEBLIGHT, a mathematical model that simulates the effect of weather, host growth and resistance, and fungicide use on asexual development and growth of Phytophthora infestans on potato foliage. Late blight epidemics from Ecuador, Mexico, Israel, and the United States involving 13 potato cultivars (32 epidemics in total) were compared with model predictions using graphical and statistical tests. Fungicides were not applied in any of the epidemics. For the simulations, a host resistance level was assigned to each cultivar based on general categories reported by local investigators. For eight cultivars, the model predictions fit the observed data. For four cultivars, the model predictions overestimated disease, likely due to inaccurate estimates of host resistance. Model predictions were inconsistent for one cultivar and for one location. It was concluded that the domain of applicability of LATEBLIGHT can be extended from the range of conditions in Peru for which it has been previously validated to those observed in this study. A sensitivity analysis showed that, within the range of values observed empirically, LATEBLIGHT is more sensitive to changes in variables related to initial inoculum and to weather than to changes in variables relating to host resistance.

  4. Relationship between Air Traffic Selection and Training (AT-SAT)) Battery Test Scores and Composite Scores in the Initial en Route Air Traffic Control Qualification Training Course at the Federal Aviation Administration (FAA) Academy

    Science.gov (United States)

    Kelley, Ronald Scott

    2012-01-01

    Scope and Method of Study: This study focused on the development and use of the AT-SAT test battery and the Initial En Route Qualification training course for the selection, training, and evaluation of air traffic controller candidates. The Pearson product moment correlation coefficient was used to measure the linear relationship between the…

  5. Hybrid Qualifications

    DEFF Research Database (Denmark)

    Against the background of increasing qualification needs there is a growing awareness of the challenge to widen participation in processes of skill formation and competence development. At the same time, the issue of permeability between vocational education and training (VET) and general education...... has turned out as a major focus of European education and training policies and certainly is a crucial principle underlying the European Qualifications Framework (EQF). In this context, «hybrid qualifications» (HQ) may be seen as an interesting approach to tackle these challenges as they serve «two...

  6. Establishing the cut-off score for remission and severity-ranges on the Psychotic Depression Assessment Scale (PDAS)

    DEFF Research Database (Denmark)

    Østergaard, Søren D; Rothschild, Anthony J; Flint, Alastair J

    2016-01-01

    BACKGROUND: The Psychotic Depression Assessment Scale (PDAS) is a rating scale dedicated to the measurement of severity in psychotic depression (PD). The aim of this study was to establish the PDAS cut-off for remission of PD as well as PDAS score-ranges for mild, moderate, and severe PD...... on the PDAS and the severity-ranges for mild, moderate, and severe PD were defined using the Clinical Global Impression - Severity scale (CGI-S) as reference by means of pair-wise receiver operating characteristic (ROC) analyses. Subsequently, it was tested whether remission on the PDAS could separate...... the effects of Olanzapine+Sertraline vs. Olanzapine+Placebo through an intention-to-treat, mixed-effects logistic regression of the data from STOP-PD. RESULTS: According to the ROC analyses, the ideal cut-off for remission of PD was a PDAS total score moderate...

  7. Free Dietary Choice and Free-Range Rearing Improve the Product Quality, Gait Score, and Microbial Richness of Chickens

    Directory of Open Access Journals (Sweden)

    Siyu Chen

    2018-06-01

    Full Text Available Poultry welfare has been extensively studied; however, there is a lack of rigorous scientific knowledge relating to the different aspects of welfare factors and how this may contribute to the production quantity and product quality as well as the welfare of chickens. Therefore, we conducted an integrated study to compare welfare factors in chickens by providing free dietary choice under cage rearing, and further comparing cage rearing with free-range rearing. One hundred chickens each were allocated to a cage rearing group with conventional feeding (CC, a cage rearing group with free dietary choice of mealworms (FDM, a cage rearing group with free dietary choice of mealworms and fresh grass (FDMG, and a free-range rearing system group with free dietary choice of mealworms and fresh grass (FRMG. Results showed that under cage rearing, free dietary choice contributed to better meat quality and gait score, higher values of blood platelets, and a richer gut microbial composition, but poorer egg production than CC chickens. As compared to FDMG, FRMG chickens showed better meat quality, gait score, and feather conditions, as well as a richer gut microbial composition; however, they had poorer egg production and a poorer foot pad and foot feather condition. We conclude that free dietary choice and free-range rearing systems improve the product quality, gait score, and microbial richness of chickens.

  8. Relationship between body condition score at calving and reproductive performance in young postpartum cows grazing native range.

    Science.gov (United States)

    Mulliniks, J T; Cox, S H; Kemp, M E; Endecott, R L; Waterman, R C; Vanleeuwen, D M; Petersen, M K

    2012-08-01

    Body condition score is used as a management tool to predict competency of reproduction in beef cows. Therefore, a retrospective study was performed to evaluate association of BCS at calving with subsequent pregnancy rate, days to first postpartum ovulation, nutrient status (assessed by blood metabolites), and calf BW change in 2- and 3-yr-old cows (n = 351) managed and selected to fit their environment of grazing native range over 6 yr at the Corona Range and Livestock Research Center, Corona, NM. Cows were managed similarly before calving, without manipulation of management, to achieve predetermined BCS at parturition. Palpable BCS (scale of 1 to 9) were determined by 2 experienced technicians before calving. Cows were classified to 1 of 3 BCS groups prior calving: BCS 4 (mean BCS = 4.3 ± 0.02), 5 (mean BCS = 5.0 ± 0.03), or 6 (mean BCS = 5.8 ± 0.06). Cows were weighed weekly after calving and serum was collected once weekly (1 yr) or twice weekly (5 yr) for progesterone analysis to estimate first postpartum ovulation beginning 35 d postpartum. Year effects also were evaluated, with years identified as either above or below average precipitation. Days to first postpartum ovulation did not differ among calving BCS groups (P = 0.93). Pregnancy rates were not influenced by calving BCS (P = 0.83; 92%, 91%, 90% for BCS 4, 5, and 6, respectively). Days to BW nadir was not influenced by BCS at calving (P = 0.95). Cow BW was different at all measuring points (P score did not influence overall pregnancy rates, indicating that young cows can have a reduced BCS and still be reproductively punctual. Therefore, these results indicate that reproductive performance of young cows with reduced BCS may not be affected when managed in extensive range conditions.

  9. Seismic qualification of equipment

    International Nuclear Information System (INIS)

    Heidebrecht, A.C.; Tso, W.K.

    1983-03-01

    This report describes the results of an investigation into the seismic qualification of equipment located in CANDU nuclear power plants. It is particularly concerned with the evaluation of current seismic qualification requirements, the development of a suitable methodology for the seismic qualification of safety systems, and the evaluation of seismic qualification analysis and testing procedures

  10. Relationship between body condition score at calving and reproductive performance in young postpartum cows grazing native range

    Science.gov (United States)

    Body condition score is used as a management tool to predict competency of reproduction in beef cows. Therefore, a retrospective study was performed to evaluate association of BCS at calving with subsequent pregnancy rate, days to first estrus, nutrient status (assessed by blood metabolites), and c...

  11. Nuclear energy electricity technical regulation on the qualification

    International Nuclear Information System (INIS)

    1995-01-01

    It tells the range of application purpose and of the qualification. It describes how to qualify of the class 1 E equipment, which are type test, operating experience, analysis and combined method. Next it deals with qualification procedure, which are specification requirement, requirement of qualification program, type testing, operating experience, analysis and combined qualification, acceptance criteria modification and extension with qualified life, simulated test profiles and document about type test data, operating experience data and extrapolation.

  12. Insulin response of the glucose and fatty acid metabolism in dry dairy cows across a range of body condition scores.

    Science.gov (United States)

    De Koster, J; Hostens, M; Van Eetvelde, M; Hermans, K; Moerman, S; Bogaert, H; Depreester, E; Van den Broeck, W; Opsomer, G

    2015-07-01

    The objective of the present research was to determine the insulin response of the glucose and fatty acid metabolism in dry dairy cows with a variable body condition score (BCS). Ten pregnant Holstein Friesian dairy cows (upcoming parity 2 to 5) were selected based on BCS at the beginning of the study (2mo before expected parturition date). During the study, animals were monitored weekly for BCS and backfat thickness and in the last 2wk, blood samples were taken for determination of serum nonesterified fatty acid (NEFA) concentration. Animals underwent a hyperinsulinemic euglycemic clamp test in the third week before the expected parturition date. The hyperinsulinemic euglycemic clamp test consisted of 4 consecutive insulin infusions with increasing insulin doses: 0.1, 0.5, 2, and 5mIU/kg per minute. For each insulin infusion period, a steady state was defined as a period of 30min where no or minor changes of the glucose infusion were necessary to keep the blood glucose concentration constant and near basal levels. During the steady state, the glucose infusion rate [steady state glucose infusion rate (SSGIR) in µmol/kg per minute] and NEFA concentration [steady state NEFA concentration (SSNEFA) in mmol/L] were determined and reflect the insulin response of the glucose and fatty acid metabolism. Dose response curves were created based on the insulin concentrations during the steady state and the SSGIR or SSNEFA. The shape of the dose response curves is determined by the concentration of insulin needed to elicit the half maximal effect (EC50) and the maximal SSGIR or the minimal SSNEFA for the glucose or fatty acid metabolism, respectively. The maximal SSGIR was negatively associated with variables reflecting adiposity of the cows (BCS, backfat thickness, NEFA concentration during the dry period, and absolute weight of the different adipose depots determined after euthanasia and dissection of the different depots), whereas the EC50 of the glucose metabolism was

  13. Electrical equipment qualification

    International Nuclear Information System (INIS)

    Farmer, W.S.

    1983-01-01

    Electrical equipment qualification research programs being carried out by CEA, JAERI, and Sandia Laboratories are discussed. Objectives of the program are: (1) assessment of accident simulation methods for electrical equipment qualification testing; lower coarse (2) evaluation of equipment aging and accelerated aging methods; (3) determine radiation dose spectrum to electrical equipment and assess simulation methods for qualification; (4) identify inadequacies in electrical equipment qualification procedures and standards and potential failure modes; and (5) provide data for verifying and improving standards, rules and regulatory guides

  14. Inspector qualification guidelines

    International Nuclear Information System (INIS)

    Batty, A.C.; Van Binnebeek, J.J.; Ericsson, P.O.; Fisher, J.C.; Geiger, P.; Grandame, M.; Grimes, B.K.; Joode, A. de; Kaufer, B.; Kinoshita, M.; Klonk, H.; Koizumi, H.; Maeda, N.; Maqua, M.; Perez del Moral, C.; Roselli, F.; Warren, T.; Zimmerman, R.

    1994-07-01

    The OECD Nuclear Energy Agency Committee on Nuclear Regulatory Activities (CNRA) has a Working Group on Inspection Practices (WGIP). The WGIP provides a forum for the exchange of Information and experience on the safety Inspection practices of regulatory authorities In the CNRA member countries. A consistent qualification process and well defined level of training for all Inspectors who participate In the safety Inspections are needed to provide consistent Inspections and reliable Inspection results. The WGIP organized in 1992 a workshop on the conduct of inspections, inspector qualification and training, and shutdown inspections at the Technical Training Center of the US NRC in Chattanooga, Tennessee. In the connection of workshop the WGIP identified a need to develop guidance for inspector qualification which could be used as a model by those who are developing their qualification practices. The inspector qualification journals of US NRC provided a good basis for the work. The following inspector qualification guideline has been developed for guidance of qualification of a new inspector recruited to the regulatory body. This guideline has been developed for helping the supervisors and training officers to give the initial training and familiarization to the duties of a new inspector in a controlled manner. US NRC inspector qualification journals have been used to define the areas of attention. This guideline provides large flexibility for application in different type organizations. Large organizations can develop separate qualification journals for each inspector positions. Small regulatory bodies can develop individual training programmes by defining the necessary training topics on case by case basis. E.g. the guideline can be used to define the qualifications of contracted inspectors used in some countries. The appropriate part would apply. Annex 1 gives two examples how this guideline could be applied

  15. Inspector qualification guidelines

    Energy Technology Data Exchange (ETDEWEB)

    Batty, A. C.; Van Binnebeek, J. J.; Ericsson, P. O.; Fisher, J. C.; Geiger, P.; Grandame, M.; Grimes, B. K.; Joode, A. de; Kaufer, B.; Kinoshita, M.; Klonk, H.; Koizumi, H.; Maeda, N.; Maqua, M.; Perez del Moral, C.; Roselli, F.; Warren, T.; Zimmerman, R.

    1994-07-15

    The OECD Nuclear Energy Agency Committee on Nuclear Regulatory Activities (CNRA) has a Working Group on Inspection Practices (WGIP). The WGIP provides a forum for the exchange of Information and experience on the safety Inspection practices of regulatory authorities In the CNRA member countries. A consistent qualification process and well defined level of training for all Inspectors who participate In the safety Inspections are needed to provide consistent Inspections and reliable Inspection results. The WGIP organized in 1992 a workshop on the conduct of inspections, inspector qualification and training, and shutdown inspections at the Technical Training Center of the US NRC in Chattanooga, Tennessee. In the connection of workshop the WGIP identified a need to develop guidance for inspector qualification which could be used as a model by those who are developing their qualification practices. The inspector qualification journals of US NRC provided a good basis for the work. The following inspector qualification guideline has been developed for guidance of qualification of a new inspector recruited to the regulatory body. This guideline has been developed for helping the supervisors and training officers to give the initial training and familiarization to the duties of a new inspector in a controlled manner. US NRC inspector qualification journals have been used to define the areas of attention. This guideline provides large flexibility for application in different type organizations. Large organizations can develop separate qualification journals for each inspector positions. Small regulatory bodies can develop individual training programmes by defining the necessary training topics on case by case basis. E.g. the guideline can be used to define the qualifications of contracted inspectors used in some countries. The appropriate part would apply. Annex 1 gives two examples how this guideline could be applied.

  16. An empirical study using range of motion and pain score as determinants for continuous passive motion: outcomes following total knee replacement surgery in an adult population.

    Science.gov (United States)

    Tabor, Danielle

    2013-01-01

    The continuous passive motion (CPM) machine is one means by which to rehabilitate the knee after total knee replacement surgery. This study sought to determine which total knee replacement patients, if any, benefit from the use of the CPM machine. For the study period, most patients received active physical therapy. Patients were placed in the CPM machine if, on postoperative day 1, they had a range of motion less than or equal to 45° and/or pain score of 8 or greater on a numeric rating scale of 0-10, 0 being no pain and 10 being the worst pain. Both groups of patients healed at similar rates. The incidence of adverse events, length of stay, and functional outcomes was comparable between groups. Given the demonstrated lack of relative benefit to the patient and the cost of the CPM, this study supported discontinuing the routine use of the CPM.

  17. Reaction Qualifications Revisited

    DEFF Research Database (Denmark)

    Lippert-Rasmussen, Kasper

    2009-01-01

      When, in a competitive sphere, people are selected on the basis of qualifications only, their chances of acquiring positions of advantage may seem to depend entirely upon their abilities, not discriminatory bias. However, if reaction qualifications - i.e. characteristics which contribute...... to a person's effectiveness by causing a favourable reaction in customers, co-workers etc. (for short: recipients) - are involved, this assumption is false. Building on work by Wertheimer, Mason, and Miller, this paper proposes an account of the reaction qualifications that count, from the point of view...... of merit. Specifically, it preserves symmetry between negative evaluations of antimeritocratic bases of selection and negative evaluations of qualifications rooted in comparable antimeritocratic reactions. So if employers should not select among applicants on the basis of their (the employers') racial...

  18. SAMe-TT2R2 Score in the Outpatient Anticoagulation Clinic to Predict Time in Therapeutic Range and Adverse Events.

    Science.gov (United States)

    Pivatto Junior, Fernando; Scheffel, Rafael Selbach; Ries, Lucas; Wolkind, Ricardo Roitman; Marobin, Roberta; Barkan, Sabrina Sigal; Amon, Luís Carlos; Biolo, Andréia

    2017-04-01

    The SAMe-TT2R2 score was developed to predict which patients on oral anticoagulation with vitamin K antagonists (VKAs) will reach an adequate time in therapeutic range (TTR) (> 65%-70%). Studies have reported a relationship between this score and the occurrence of adverse events. To describe the TTR according to the score, in addition to relating the score obtained with the occurrence of adverse events in patients with nonvalvular atrial fibrillation (AF) on oral anticoagulation with VKAs. Retrospective cohort study including patients with nonvalvular AF attending an outpatient anticoagulation clinic of a tertiary hospital. Visits to the outpatient clinic and emergency, as well as hospital admissions to the institution, during 2014 were evaluated. The TTR was calculated through the Rosendaal´s method. We analyzed 263 patients (median TTR, 62.5%). The low-risk group (score 0-1) had a better median TTR as compared with the high-risk group (score ≥ 2): 69.2% vs. 56.3%, p = 0.002. Similarly, the percentage of patients with TTR ≥ 60%, 65% or 70% was higher in the low-risk group (p vitamina K (AVKs) atingirão um tempo na faixa terapêutica (TFT) adequado (> 65%-70%) no seguimento. Estudos também o relacionaram com a ocorrência de eventos adversos. Descrever o TFT de acordo com o escore, além de relacionar a pontuação obtida com a ocorrência de eventos adversos adversos em pacientes com fibrilação atrial (FA) não valvar em anticoagulação oral com AVKs. Estudo de coorte retrospectivo incluindo pacientes com FA não valvar em acompanhamento em ambulatório de anticoagulação de um hospital terciário. Foi realizada uma avaliação retrospectiva de consultas ambulatoriais, visitas a emergência e internações hospitalares na instituição no período de janeiro-dezembro/2014. O TFT foi calculado aplicando-se o método de Rosendaal. Foram analisados 263 pacientes com TFT mediano de 62,5%. O grupo de baixo risco (0-1 ponto) obteve um TFT mediano maior em

  19. Approach to customer qualification of the BNFL Sellafield Mox Plant

    International Nuclear Information System (INIS)

    Sullivan, P.

    2003-01-01

    BNFL started plutonium commissioning of its Sellafield MOX Plant (SMP) in December 2001, with the first MOX pellets being produced in May 2002. SMP was designed to manufacture a range of both PWR and BWR fuel types for a number of different customers. During commissioning and early MOX fuel manufacturing BNFL has been demonstrating its ability to both automatically manufacture and inspect MOX fuel to meet the requirements of different customers' specifications and fuel types. The qualification project consisted of common and project specific qualification. Common qualification was carried out to demonstrate BNFL could meet several customers' requirements during the same qualification test. Project specific qualification was carried out for one customer only as the fabrication or inspection equipment was specific to their fuel type. An example is the fuel assembly process. The reasons for BNFL carrying out common qualification were: - Develop a common qualified process to meet different customer specifications. - Minimise future qualifications prior to starting future fuel campaigns. - Ensure BNFL understands and effectively manages different customer requirements in SMP. BNFL has approached qualification of SMP systematically. Firstly the inspection system was qualified, and once completed the inspection system was then used in the qualification of the manufacturing process. (orig.)

  20. Hybrid Qualifications Country report Denmark

    DEFF Research Database (Denmark)

    Jørgensen, Christian Helms

    2010-01-01

    The report explores the institutional and functional relations between the higher education (tertiary sector) and vocational education (higher secondary education) and the labour market. In the report are included descriptions of the history, funding, outcomes, institutional realisation and term ...... and range of hybrid qualifications in the national system. In addition some recommendations for constructive further developments are given.......The report explores the institutional and functional relations between the higher education (tertiary sector) and vocational education (higher secondary education) and the labour market. In the report are included descriptions of the history, funding, outcomes, institutional realisation and term...

  1. Appearance, discrimination, and reaction qualifications

    OpenAIRE

    Mason, Andrew

    2016-01-01

    When are selectors for advantaged social positions morally justified in giving weight to the appearance of the candidates? In order to address this issue adequately, we need to know when a person’s appearance can be a legitimate qualification for a position. Some of the hardest cases are jobs that involve interacting with clients or customers who prefer to deal with good-looking employees or who respond more favourably to them. But there is also a wide range of difficult cases in which an unc...

  2. Advanced qualification techniques

    International Nuclear Information System (INIS)

    Winokur, P.S.; Shaneyfelt, M.R.; Meisenheimer, T.L.; Fleetwood, D.M.

    1993-01-01

    This paper demonstrates use of the Qualified Manufacturers List (QML) methodology to qualify commercial and military microelectronics for use in space applications. QML ''builds in'' the hardness of product through statistical process control (SPC) of technology parameters relevant to the radiation response, test structure to integrated circuit (IC) correlations, and techniques for extrapolating laboratory test results to low-dose-rate space scenarios. Each of these elements is demonstrated and shown to be a cost-effective alternative to expensive end-of-line IC testing. Several examples of test structured-IC correlations are provided and recent work on complications arising from transistor scaling and geometry is discussed. The use of a 10-keV x-ray wafer-level test system to support SPC and establish ''process capability'' is illustrated and a comparison of 10-keV x-ray and Co 60 gamma irradiations is provided for a wide range of CMOS technologies. The x-ray tester is shown to be cost-effective and its use in lot acceptance/qualification is recommended. Finally, a comparison is provided between MIL-STD-883D, Test Method 1019.4, which governs the testing of packaged semiconductor microcircuits in the DoD, and ESA/SSC Basic Specification No. 22900, Europe's Total Dose Steady-State Irradiation Test Method. Test Method 1019.4 focuses on conservative estimates of MOS hardness for space and tactical applications, while Basic Specification 22900 focuses on improved simulation of low-dose-rate space environments

  3. Total qualification of class 1E electric equipment

    International Nuclear Information System (INIS)

    Chauvin, G.

    1982-09-01

    For nuclear power plant projects in France, Framatome and its partners Electricite de France (EDF) and the Commissariat a l'Energie Atomique (CEA) have responded to the present qualification context by implementing a wide-ranging qualification program to acquire significant organizational and practical experience. The following sections detail Framatome's approach to the activities of an organization mandated to provide a complete spectrum of qualification services. Thorough implementation of a Class 1E electric equipment qualification program by the competent organization or qualifier entails completion of three consecutive steps: 1) program preparation, 2) program implementation, and 3) analysis of test results and conclusion. The qualifier assumes extensive responsibility for each of these steps. The following sections present test facilities used in France to conduct a total qualification program for Class 1E electric equipment

  4. Qualification criteria for persons responsible for radiation protection

    International Nuclear Information System (INIS)

    Wehner, G

    1980-01-01

    A survey of the qualification criteria included in the German atomic law (Atomic Energy Act, Radiological Protection Ordinance and X-ray Protection Ordinance) for persons responsible for radiation protection is given. Especially the various activities for which a health physics officer is required, the range of qualification in each case and the way the qualification has to be proved, are pointed out. Also the different guides that are issued to complete the legal requirements are mentioned. The definitions of the term qualification for health physics given in the different guides are cited and it is shown, that the qualification of a healt physics officer has to be based on the three criteria (I) vocational training. (II) professional experience and (III) the necessary knowledge in radiation protection. (orig./HP) [de

  5. Software qualification in safety applications

    International Nuclear Information System (INIS)

    Lawrence, J.D.

    2000-01-01

    The developers of safety-critical instrumentation and control systems must qualify the design of the components used, including the software in the embedded computer systems, in order to ensure that the component can be trusted to perform its safety function under the full range of operating conditions. There are well known ways to qualify analog systems using the facts that: (1) they are built from standard modules with known properties; (2) design documents are available and described in a well understood language; (3) the performance of the component is constrained by physics; and (4) physics models exist to predict the performance. These properties are not generally available for qualifying software, and one must fall back on extensive testing and qualification of the design process. Neither of these is completely satisfactory. The research reported here is exploring an alternative approach that is intended to permit qualification for an important subset of instrumentation software. The research goal is to determine if a combination of static analysis and limited testing can be used to qualify a class of simple, but practical, computer-based instrumentation components for safety application. These components are of roughly the complexity of a motion detector alarm controller. This goal is accomplished by identifying design constraints that enable meaningful analysis and testing. Once such design constraints are identified, digital systems can be designed to allow for analysis and testing, or existing systems may be tested for conformance to the design constraints as a first step in a qualification process. This will considerably reduce the cost and monetary risk involved in qualifying commercial components for safety-critical service

  6. Reaction Qualifications Revisited

    DEFF Research Database (Denmark)

    Lippert-Rasmussen, Kasper

    2009-01-01

    to a person's effectiveness by causing a favourable reaction in customers, co-workers etc. (for short: recipients) - are involved, this assumption is false. Building on work by Wertheimer, Mason, and Miller, this paper proposes an account of the reaction qualifications that count, from the point of view...... preferences, recipients should not respond to the applicant actually hired on the basis of their (the recipients') racial preferences. My account decomposes the meritocratic ideal into four separate norms, one of which applies to recipients rather than to selectors. Finally, it defends the view that reaction...... qualifications based on antimeritocratic reactions, while not unproblematic, are not entirely irrelevant from the point of view of merit. Notably, selectors need not discount them when no one - including the targets of the objectionable preferences - is unfairly disadvantaged. Because not all problematic...

  7. Qualification of conditioning process

    International Nuclear Information System (INIS)

    Wolf, J.

    1989-01-01

    A conditioning process is qualified by the PTB if the execution of pre-treatment and conditioning occurs so that a safe and orderly final storage of the products and waste containers produced can be assumed. All the relevant operating conditions for the plant are laid down by the producer/conditioner of the waste in a handbook. The elements of product inspection by process qualification are shown in tabular form. (DG) [de

  8. REGULATION OF NATIONAL QUALIFICATIONS SYSTEMS

    Directory of Open Access Journals (Sweden)

    Anna A. Muravyeva

    2014-01-01

    Full Text Available The paper looks into the diverse aspects of qualifications system regulation, designed for balancing the supply and demand in the labor and educational service markets. Both the objects and mechanisms of such regulation are described. Special attention is given to institutions, involved in regulation of qualifications, and their jurisdiction. Another emphasis is on the industry-related regulation of qualifications which proved to be effective both on the national and European level. Such structures were first established on the national levels to regulate the qualifications and ensure their comparability and compatibility, given the economic globalization and growing labor and academic mobility. The author points out the role of the ministries of education and labor in maintaining a steady qualifications system, and outlines the positive experience of Great Britain using the industry councils for continuing development of qualifications system.

  9. Data Qualification guidelines

    International Nuclear Information System (INIS)

    Edwards, T.B.; Shine, E.P.

    1992-01-01

    Data Qualification (DQ) is a formal, technical process whose objective is to affirm that experimental data are suitable for their intended use. Although it is not possible to develop a fixed recipe for the DQ process to cover all test situations, these general guidelines have been developed for the Nuclear Engineering Section to establish a framework for qualifying data from steady-state processing. These guidelines outline the role of the DQ team providing insight into the planning and conducting of the DQ process

  10. Effects of Rating Training on Inter-Rater Consistency for Developing a Dental Hygiene Clinical Rater Qualification System

    Directory of Open Access Journals (Sweden)

    Jeong Ran Park

    2007-12-01

    Full Text Available We tried to develop itemized evaluation criteria and a clinical rater qualification system through rating training of inter-rater consistency for experienced clinical dental hygienists and dental hygiene clinical educators. A total of 15 clinical dental hygienists with 1-year careers participated as clinical examination candidates, while 5 dental hygienists with 3-year educations and clinical careers or longer participated as clinical raters. They all took the clinical examination as examinees. The results were compared, and the consistency of competence was measured. The comparison of clinical competence between candidates and clinical raters showed that the candidate group?占퐏 mean clinical competence ranged from 2.96 to 3.55 on a 5-point system in a total of 3 instruments (Probe, Explorer, Curet, while the clinical rater group?占퐏 mean clinical competence ranged from 4.05 to 4.29. There was a higher inter-rater consistency after education of raters in the following 4 items: Probe, Explorer, Curet, and insertion on distal surface. The mean score distribution of clinical raters ranged from 75% to 100%, which was more uniform in the competence to detect an artificial calculus than that of candidates (25% to 100%. According to the above results, there was a necessity in the operating clinical rater qualification system for comprehensive dental hygiene clinicians. Furthermore, in order to execute the clinical rater qualification system, it will be necessary to keep conducting a series of studies on educational content, time, frequency, and educator level.

  11. Environmental data qualification system

    International Nuclear Information System (INIS)

    Hester, O.V.; Groh, M.R.

    1989-01-01

    The Integrated Environmental Data Management System (IEDMS) is a PC-based system that can support environmental investigations from their design stage and throughout the duration of the study. The system integrates data originating from the Sampling and Analysis Plan, field data and analytical findings. The IEDMS automated features include sampling guidance forms, barcoded sample labels and tags, field and analytical forms reproduction, sample tracking, analytical data qualification, completeness reports, and results and QC data reporting. The IEDMS has extensive automated capabilities that support a systematic and comprehensive process for performing quality assessment of EPA-CLP chemical analyses data. One product of this process is a unique and extremely useful tabular presentation of the data. One table contains the complete set of results and QC data included on the CLP data forms while presenting the information consistent with the chronology in which the analysis was performed. 3 refs., 1 fig

  12. TOUGH2 software qualification

    International Nuclear Information System (INIS)

    Pruess, K.; Simmons, A.; Wu, Y.S.; Moridis, G.

    1996-02-01

    TOUGH2 is a numerical simulation code for multi-dimensional coupled fluid and heat flow of multiphase, multicomponent fluid mixtures in porous and fractured media. It belongs to the MULKOM (open-quotes MULti-KOMponentclose quotes) family of codes and is a more general version of the TOUGH simulator. The MULKOM family of codes was originally developed with a focus on geothermal reservoir simulation. They are suited to modeling systems which contain different fluid mixtures, with applications to flow problems arising in the context of high-level nuclear waste isolation, oil and gas recovery and storage, and groundwater resource protection. TOUGH2 is essentially a subset of MULKOM, consisting of a selection of the better tested and documented MULKOM program modules. The purpose of this package of reports is to provide all software baseline documents necessary for the software qualification of TOUGH2

  13. TOUGH2 software qualification

    Energy Technology Data Exchange (ETDEWEB)

    Pruess, K.; Simmons, A.; Wu, Y.S.; Moridis, G.

    1996-02-01

    TOUGH2 is a numerical simulation code for multi-dimensional coupled fluid and heat flow of multiphase, multicomponent fluid mixtures in porous and fractured media. It belongs to the MULKOM ({open_quotes}MULti-KOMponent{close_quotes}) family of codes and is a more general version of the TOUGH simulator. The MULKOM family of codes was originally developed with a focus on geothermal reservoir simulation. They are suited to modeling systems which contain different fluid mixtures, with applications to flow problems arising in the context of high-level nuclear waste isolation, oil and gas recovery and storage, and groundwater resource protection. TOUGH2 is essentially a subset of MULKOM, consisting of a selection of the better tested and documented MULKOM program modules. The purpose of this package of reports is to provide all software baseline documents necessary for the software qualification of TOUGH2.

  14. The french safety approach regarding equipment qualification

    International Nuclear Information System (INIS)

    Jalouneix, J.; Deletre, G.; Henry, J.Y.; Rousseau, L.

    1989-10-01

    The qualification of the equipment, used in France on nuclear reactors and reactor components, is discussed. The approach on safety involves the qualification of mechanical and electrical components, under operating and under seismic conditions. The principles of the qualification program and the list of the equipment concerned, are given. The conditions in which qualification tests are performed and the methods applied, are summarized. The actions for preserving the qualification procedures, are considered

  15. Maintenance and environmental qualification

    International Nuclear Information System (INIS)

    Martin, R.S.; Austin, D.G.

    1995-01-01

    The design of today's nuclear generating plants involves many detailed design considerations. This includes comprehensive look at aging effects on plant components over their expected lifetimes. This is important to ensuring that the plant operates safely throughout its life. The effects of aging are required to be documented in detail in today's designs. This documentation provides assurance that safe operating conditions are maintained throughout the station life cycle. This requirement is analogous to the longer standing requirement to ensure pressure boundary integrity. The pressure boundary integrity requirement has existed in the industry since its inception. The subject of plant aging effects and the maintenance of functionality is known as Environmental Qualification (EQ). This paper will attempt to explain the wisdom of EQ and the potential for optimizing maintenance activities (to move from reactive to proactive activities), within the context of the overall maintenance program. It is the author's intent to encourage the active involvement of maintenance professionals in the effective implementation of the ongoing EQ program so that the benefits are maximized

  16. Dynamic testing and qualification

    International Nuclear Information System (INIS)

    Kleine Tebbe, A.; Schmidt, G.; Theymann, W.

    1990-01-01

    The core structure of an HTR-plant consists of the side reflector, the bottom reflector, the top reflector and the pebble bed of spherical fuel elements. Dynamically this system is a many-body structure with non-linear force-deformation couplings. The integrity of the system under seismic loads is given by radially orientated spring packs. These spring packs must be stiff against earthquake loads, but must allow radial thermal movements. To verify the seismic safety of the system, scaled-down models were tested. The results of these tests were compared with those of analytical methods. The good-natured behaviour of the pebble-bed under seismic loads has been confirmed. Due to the granular structure of the non-regular packed pebble-bed, high damping occurs during seismic excitations. With increasing depth the damping ratio decreases because of restriction of movement. We are able to describe the seismic behaviour of the pebble-bed analytically. The one- and two-dimensional test configurations of the top reflector were used to analyse resonance and lumping effects. The experimental results were verified by the computer codes CRUNCH-1D AND CRUNCH-2D. The experimental investigations of the side reflector are underway. The results show a non-critical behaviour under horizontal excitations. Small rigid-body motions of single blocks are detected, but they do not cause any global ovalisations of the complete ring structure. Finite element calculations with contact and friction between the blocks show a close agreement with the experimental results. Seismic qualification of ground mounted electrical equipment is usually performed on the basis of codes like IEEE, IEC, KTA, etc. These standards give different possibilities of the excitation mode: sinusoidal excitation in every natural frequency (continuous or sine beat) or time history excitation which covers a prescribed required response spectrum. Recently performed tests are compared regarding the usefulness and severity

  17. Evolution of seismic shock test qualification of equipment

    International Nuclear Information System (INIS)

    Berriaud, C.

    1979-01-01

    From the first nuclear power plants a new industrial problem is appeared: the seismic test qualification of equipment. Nothing was existing in this range. Methods and test experiments were to be studied and perfected in order to obtain safe results. This paper presents the evolution of this question up to now [fr

  18. Developing, Approving and Maintaining Qualifications: Selected International Approaches. Research Report

    Science.gov (United States)

    Misko, Josie

    2015-01-01

    There are lessons for Australia in the key approaches to the development, approval, maintenance and quality assurance of qualifications adopted in countries overseas. This research takes into account a range of approaches used in selected European Union (EU) member states (Germany, Finland and Sweden), the United Kingdom (England, Northern Ireland…

  19. Europeans come together on qualification

    International Nuclear Information System (INIS)

    Whittle, J.

    1996-01-01

    Utilities operating nuclear power plants in Europe have formed the European Network for Inspection Qualification (ENIQ) to produce a common approach to demonstrating that non-destructive testing is capable providing the information to ensure the absence of significant defects in nuclear plants. Major developments over recent months have included the issue by ENIQ of a formal document defining the methodology for the conduct of qualification which sets out the principles that detailed systems, within an individual country context, should embody. A pilot study on pipe welds typical of those in BWR recirculation loops is being conducted to explore the issues involved in the practical application of the methodology. In parallel with ENIQ, the European Nuclear Regulators Working Group has set up a Task Force in an attempt to define a common regulatory position on non-destructive testing qualifications and has produced its own document which is wider in scope than that of ENIQ. (UK)

  20. Qualification of software and hardware

    International Nuclear Information System (INIS)

    Gossner, S.; Schueller, H.; Gloee, G.

    1987-01-01

    The qualification of on-line process control equipment is subdivided into three areas: 1) materials and structural elements; 2) on-line process-control components and devices; 3) electrical systems (reactor protection and confinement system). Microprocessor-aided process-control equipment are difficult to verify for failure-free function owing to the complexity of the functional structures of the hardware and to the variety of the software feasible for microprocessors. Hence, qualification will make great demands on the inspecting expert. (DG) [de

  1. 5 CFR 319.302 - Individual qualifications.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Individual qualifications. 319.302... Individual qualifications. Agency heads are delegated authority to approve the qualifications of individuals appointed to SL and ST positions. The agency head must determine that the individual meets the...

  2. Changing existing qualifications into outcomes-based qualifications ...

    African Journals Online (AJOL)

    Various workshops were facilitated to determine the outcomes of each level of our qualification, B Tech: Policing. This led to the formulation of a purpose statement, exit level outcomes and specific outcomes as well as assessment criteria and the critical outcomes embedded in each level identified. Using the specific ...

  3. Large Bore Powder Gun Qualification (U)

    Energy Technology Data Exchange (ETDEWEB)

    Rabern, Donald A. [Los Alamos National Laboratory; Valdiviez, Robert [Los Alamos National Laboratory

    2012-04-02

    A Large Bore Powder Gun (LBPG) is being designed to enable experimentalists to characterize material behavior outside the capabilities of the NNSS JASPER and LANL TA-55 PF-4 guns. The combination of these three guns will create a capability to conduct impact experiments over a wide range of pressures and shock profiles. The Large Bore Powder Gun will be fielded at the Nevada National Security Site (NNSS) U1a Complex. The Complex is nearly 1000 ft below ground with dedicated drifts for testing, instrumentation, and post-shot entombment. To ensure the reliability, safety, and performance of the LBPG, a qualification plan has been established and documented here. Requirements for the LBPG have been established and documented in WE-14-TR-0065 U A, Large Bore Powder Gun Customer Requirements. The document includes the requirements for the physics experiments, the gun and confinement systems, and operations at NNSS. A detailed description of the requirements is established in that document and is referred to and quoted throughout this document. Two Gun and Confinement Systems will be fielded. The Prototype Gun will be used primarily to characterize the gun and confinement performance and be the primary platform for qualification actions. This gun will also be used to investigate and qualify target and diagnostic modifications through the life of the program (U1a.104 Drift). An identical gun, the Physics Gun, will be fielded for confirmatory and Pu experiments (U1a.102D Drift). Both guns will be qualified for operation. The Gun and Confinement System design will be qualified through analysis, inspection, and testing using the Prototype Gun for the majority of process. The Physics Gun will be qualified through inspection and a limited number of qualification tests to ensure performance and behavior equivalent to the Prototype gun. Figure 1.1 shows the partial configuration of U1a and the locations of the Prototype and Physics Gun/Confinement Systems.

  4. Mutual Recogniton of Professional Qualifications

    DEFF Research Database (Denmark)

    Enemark, Stig; Plimmer, Francis

    The publication aims to review the concept of mutual recognition of qualifications within the world wide surveying community, and to develop a framework for the introduction of standards of global professional competence in this area. The publication also includes a number of case studies from...

  5. Helicopter-Ship Qualification Testing

    NARCIS (Netherlands)

    Hoencamp, A.

    2015-01-01

    The goal of this research project is to develop a novel test methodology which can be used for optimizing cost and time efficiency of helicopter-ship qualification testing without reducing safety. For this purpose, the so-called “SHOL-X” test methodology has been established, which includes the

  6. Personnel Officers: Judging Their Qualifications.

    Science.gov (United States)

    Webb, Gisela

    1988-01-01

    Discusses the backgrounds and qualifications appropriate for a library personnel administrator, including (1) a master's degree in library science; (2) library work experience; (3) additional training in administration, personnel management, organizational development, and psychology; and (4) personal attributes such as good communication skills,…

  7. 77 FR 59339 - Contractor Qualifications

    Science.gov (United States)

    2012-09-27

    ... DEPARTMENT OF DEFENSE Defense Acquisition Regulations System 48 CFR Part 209 Contractor Qualifications CFR Correction In Title 48 of the Code of Federal Regulations, Chapter 2 (Parts 201-299), revised as of October 1, 2011, on page 55, in section 209.104-70, paragraph (a) is amended by revising the...

  8. Seismic and dynamic qualification methods

    International Nuclear Information System (INIS)

    Lin, C.W.

    1985-01-01

    This book presents the papers given at a conference on seismic effects on nuclear power plants. Topics considered at the conference included seismic qualification of equipment, multifrequency test methodologies, damping in piping systems, the amplification factor, thermal insulation, welded joints, and response factors for seismic risk analysis of piping

  9. Hanford Tank Waste Treatment and Immobilization Plant (WTP) Waste Feed Qualification Program Development Approach - 13114

    Energy Technology Data Exchange (ETDEWEB)

    Markillie, Jeffrey R.; Arakali, Aruna V.; Benson, Peter A.; Halverson, Thomas G. [Hanford Tank Waste Treatment and Immobilization Plant Project, Richland, WA 99354 (United States); Adamson, Duane J.; Herman, Connie C.; Peeler, David K. [Savannah River National Laboratory, Aiken, SC 29808 (United States)

    2013-07-01

    The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is a nuclear waste treatment facility being designed and constructed for the U.S. Department of Energy by Bechtel National, Inc. and subcontractor URS Corporation (under contract DE-AC27-01RV14136 [1]) to process and vitrify radioactive waste that is currently stored in underground tanks at the Hanford Site. A wide range of planning is in progress to prepare for safe start-up, commissioning, and operation. The waste feed qualification program is being developed to protect the WTP design, safety basis, and technical basis by assuring acceptance requirements can be met before the transfer of waste. The WTP Project has partnered with Savannah River National Laboratory to develop the waste feed qualification program. The results of waste feed qualification activities will be implemented using a batch processing methodology, and will establish an acceptable range of operator controllable parameters needed to treat the staged waste. Waste feed qualification program development is being implemented in three separate phases. Phase 1 required identification of analytical methods and gaps. This activity has been completed, and provides the foundation for a technically defensible approach for waste feed qualification. Phase 2 of the program development is in progress. The activities in this phase include the closure of analytical methodology gaps identified during Phase 1, design and fabrication of laboratory-scale test apparatus, and determination of the waste feed qualification sample volume. Phase 3 will demonstrate waste feed qualification testing in support of Cold Commissioning. (authors)

  10. Qualification and certification in NDT

    International Nuclear Information System (INIS)

    Hassan Kavarodi Maracair

    2003-01-01

    Ruane-TATI Sdn Bhd was the first accredited training centre in Asia approved by The British Institute of Non Destructive Testing (BINDT) as per EN 473, ISO 9712 and EN 45013 requirements. Meanwhile, Ruane-TATI is also accredited by National Vocational Training Center ( MLVK ).This mean that Ruane-TATI is the first training and examination center that accredited by both international and national bodies in providing quality , qualification and certification for comprehensive training and examination in Inspection and Non Destructive Testing (NDT). There are several NDT examinations scheme available in Malaysia due to differences requirement from the industrials. This has put the difficulties to services company in upgrading their NDT technician qualifications. The intention of this paper is to discuss the basic different among the NDT examinations scheme used in Malaysia ( mostly offered by Ruane-TATI ) and the development of certain schemes in covering their schemes to more sectors and NDT methods. (Author)

  11. Radiation Safety (Qualifications) Regulations 1980

    International Nuclear Information System (INIS)

    1980-01-01

    These Regulations, promulgated pursuant to the provisions of the Radiation Safety Act, 1975-1979, require persons engaged in activities involving radiation to pass a radiation safety examination or to possess an approved qualification in radiation. The National Health and Medical Research Council is authorised to exempt persons from compliance with these requirements or, conversely, to impose such requirements on persons other than those designated. (NEA) [fr

  12. Pilot study approach and qualification dossier components

    International Nuclear Information System (INIS)

    Ammirato, F.; Ashwin, P.

    2000-01-01

    The aim of the Pilot Project is to evaluate the IAEA Guidelines and methodology for the benefit of IAEA Member States trough a simulation of qualification activities. The Project is based on a real component and available data - NPP Kozloduy unit 5, weld 3. The initial phase is limited to the Qualification dossier. The Project relies on the input from the team members and Member States. Team organization and responsibilities are presented. The components of the Qualification Dossier (technical specification, inspection procedure and preliminary review, qualification procedure) and their current status are also presented. A comparison is done with their qualification programs. The characteristics of performance demonstrations are discussed. The results show that the teamwork has been successful and the IAEA methodology covers all situations. It is expected that the End Project will become 'Benchmark's' for future qualification activities

  13. Environmental qualification program for new designs

    International Nuclear Information System (INIS)

    Doerffer, K.

    2007-01-01

    Qualification of nuclear power plant equipment and components important to safety (ITS) is an integral part of the design process. The qualification methodology differs based on the severity of service conditions (operational and ambient), to which the ITS equipment is exposed. In Canada, the licensing requirements for environmental qualification for new designs are governed by the Canadian Standard Association (CSA) standard, N290.13-2005 titled 'Environmental Qualification of Equipment for CANDU Nuclear Power Plants' and the pre-consultation draft, 'Requirements for Design of Nuclear Power Plants'(DRD), issued for trial use by the Canadian Nuclear Safety Commission (CNSC) in March 2005. This paper will describe AECL's current Environmental Qualification program developed to comply with the above licensing requirements as applied to new designs. The focus will be given to qualification of ITS systems structures and components (SSC) to harsh conditions occurring due to the Design Basis Accidents (DBA). (author)

  14. AGR-1 Data Qualification Report

    International Nuclear Information System (INIS)

    Abbott, Michael

    2010-01-01

    Projects for the very high temperature reactor (VHTR) Technology Development Office (TDO) program provide data in support of Nuclear Regulatory Commission licensing of the VHTR. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high temperature and high fluence environments. The VHTR program has established the NGNP Data Management and Analysis System (NDMAS) to ensure that VHTR data are (1) qualified for use, (2) stored in a readily accessible electronic form, and (3) analyzed to extract useful results. This document focuses on the first NDMAS objective. It describes the data streams associated with the first Advanced Gas Reactor experiment (AGR-1), the processing of these data within NDMAS, and reports the qualification status of the data. Data qualification activities within NDMAS for specific types of data are determined by the data qualification category assigned by the data generator. They include: (1) capture testing, to confirm that the data stored within NDMAS are identical to the raw data supplied, (2) accuracy testing, to confirm that the data are an accurate representation of the system or object being measured, and (3) documentation that the data were collected under an NQA-1 or equivalent quality assurance program. The NDMAS database processing and qualification status of the following five data streams is reported in this document: (1) Fuel fabrication data. All data have been processed into the NDMAS database and qualified (1,819 records). (2) Fuel irradiation data. Data from all 13 AGR-1 reactor cycles have been processed into the NDMAS database and tested. Of these, 85% have been qualified and 15% have failed NDMAS accuracy testing. (3) FPMS data. Reprocessed (January 2010) data from all 13 AGR-1 reactor cycles have been processed into the database and capture tested. Final qualification of these data will be recorded after QA approval of an Engineering Calculations and Analysis Report currently

  15. IEEE standard for design qualification of safety systems equipment used in nuclear power generating stations

    International Nuclear Information System (INIS)

    Anon.

    1980-01-01

    This standard is written to serve as a general standard for qualification of all types of safety systems equipment, mechanical and instrumentation as well as electrical. It also establishes principles and procedures to be followed in preparing specific safety systems equipment standards. Guidance for qualifying specific safety systems equipment may be found in various specific equipment qualification standards that are now available or are being prepared. It is required that safety systems equipment in nuclear power generating stations meet or exceed its performance requirements throughout its installed life. This is accomplished by a disciplined program of design qualification and quality assurance of design, production, installation, maintenance and surveillance. This standard is for the design qualification section of the program only. Design qualification is intended to demonstrate the capability of the equipment design to perform its safety function(s) over the expected range of normal, abnormal, design basis event, post design basis event, and in-service test conditions. Inherent to design qualification is the requirement for demonstration, within limitations afforded by established technical state-of-the-art, that in-service aging throughout the qualified life established for the equipment will not degrade safety systems equipment from its original design condition to the point where it cannot perform its required safety function(s), upon demand. The above requirement reflects the primary role of design qualification to provide reasonable assurance that design- and age-related common failure modes will not occur during performance of safety function(s) under postulated service conditions

  16. ENIQ: European Network for Inspection Qualification

    International Nuclear Information System (INIS)

    Champigny, F.; Crutzen, S.; Lemaitre, P.

    1995-01-01

    Many countries are currently considering their own approach to inspection qualification and are carefully assessing experience to date. ENIQ, which stands for European Network for Inspection Qualification, groups the major part of the utilities in Western Europe. The general objective of ENIQ is to coordinate and manage at European level expertise and resources for the assessment and qualification of NDE inspection techniques and procedures, primarily for nuclear components. Also non-nuclear heavy duty components will be considered. Within ENIQ there is a growing consensus of opinion on the general principles of a European approach towards inspection qualification. In this paper the main activities, organization and actual status of ENIQ will be discussed

  17. Australian Qualifications Framework Lower-Level Qualifications: Pathways to Where for Young People?

    Science.gov (United States)

    Stanwick, John

    2005-01-01

    This study investigates where certificate I and II qualifications lead young people aged 15-24 years in terms of employment and further study. A prime motivation for young people undertaking these qualifications is to facilitate transition into the labour market. These qualifications are aimed at developing basic vocational skills or preparatory…

  18. Rover Low Gain Antenna Qualification for Deep Space Thermal Environments

    Science.gov (United States)

    Ramesham, Rajeshuni; Amaro, Luis R.; Brown, Paula R.; Usiskin, Robert; Prater, Jack L.

    2013-01-01

    A method to qualify the Rover Low Gain Antenna (RLGA) for use during the Mars Science Laboratory (MSL) mission has been devised. The RLGA antenna must survive all ground operations, plus the nominal 670 Martian sol mission that includes the summer and winter seasons of the Mars thermal environment. This qualification effort was performed to verify that the RLGA design, its bonding, and packaging processes are adequate. The qualification test was designed to demonstrate a survival life of three times more than all expected ground testing, plus a nominal 670 Martian sol missions. Baseline RF tests and a visual inspection were performed on the RLGA hardware before the start of the qualification test. Functional intermittent RF tests were performed during thermal chamber breaks over the course of the complete qualification test. For the return loss measurements, the RLGA antenna was moved to a test area. A vector network analyzer was calibrated over the operational frequency range of the antenna. For the RLGA, a simple return loss measurement was performed. A total of 2,010 (3 670 or 3 times mission thermal cycles) thermal cycles was performed. Visual inspection of the RLGA hardware did not show any anomalies due to the thermal cycling. The return loss measurement results of the RLGA antenna after the PQV (Package Qualification and Verification) test did not show any anomalies. The antenna pattern data taken before and after the PQV test at the uplink and downlink frequencies were unchanged. Therefore, the developed design of RLGA is qualified for a long-duration MSL mission.

  19. Next Generation Qualification: Nanometrics T120PH Seismometer Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Merchant, Bion J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Slad, George William [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-10-01

    Sandia National Laboratories has tested and evaluated three seismometers, the Trillium 120PH, manufactured by Nanometrics. These seismometers measure broadband ground velocity using a UVW configuration with feedback control in a mechanically levelled borehole package. The purpose of the seismometer evaluation was to determine a measured sensitivity, response, self- noise, dynamic range, and self-calibration ability. The Nanometrics Trillium 120PH seismometers are being evaluated for the U.S. Air Force as part of their Next Generation Qualification effort.

  20. The qualification of reactor operators

    International Nuclear Information System (INIS)

    Lima, J.M. de; Soares, H.V.

    1981-01-01

    The qualification and performance of nuclear power personnel have an important influence on the availability and safety operation of these plants. This paper describes the Brazilian rules and norms established by the CNEN-Brazilian Atomic Energy Comission, as well as policy of other countries concerning training requirements and experiences of nuclear power reactor operators. Some coments are made about the im pact of the march 1979 Three Mile Island accident on upgrading the reactor training requirements in U.S.A. and its international implication. (Author) [pt

  1. Review of qualifications for fuel assembly fabrication

    International Nuclear Information System (INIS)

    Slabu, Dan; Zemek, Martin; Hellwig, Christian

    2013-01-01

    The required quality of nuclear fuel in industrial production can only be assured by applying processes in fabrication and inspection, which are well mastered and have been proven by an appropriate qualification. The present contribution shows the understanding and experiences of Axpo with respect to qualifications in the frame of nuclear fuel manufacturing and reflects some related expectations of the operator. (orig.)

  2. Qualification tests for a dosimetry system

    International Nuclear Information System (INIS)

    Anon.

    2005-01-01

    The report of qualification tests for personnel dosemeters is detailed. Qualification test for the energy response and the incidence angle is given. The procedure of test is resumed. Different coefficients of conversion used in these tests are given in tables. (N.C.)

  3. 48 CFR 1553.209 - Contractor qualifications.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Contractor qualifications. 1553.209 Section 1553.209 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION AGENCY CLAUSES AND FORMS FORMS Prescription of Forms 1553.209 Contractor qualifications. ...

  4. 48 CFR 253.209 - Contractor qualifications.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Contractor qualifications. 253.209 Section 253.209 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT OF DEFENSE CLAUSES AND FORMS FORMS Prescription of Forms 253.209 Contractor qualifications. ...

  5. 48 CFR 53.209 - Contractor qualifications.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Contractor qualifications. 53.209 Section 53.209 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION (CONTINUED) CLAUSES AND FORMS FORMS Prescription of Forms 53.209 Contractor qualifications. ...

  6. Methods Data Qualification Interim Report

    International Nuclear Information System (INIS)

    Alessi, R. Sam; Grimmett, Tami; Vang, Leng; McGrath, Dave

    2010-01-01

    The overall goal of the Next Generation Nuclear Plant (NGNP) Data Management and Analysis System (NDMAS) is to maintain data provenance for all NGNP data including the Methods component of NGNP data. Multiple means are available to access data stored in NDMAS. A web portal environment allows users to access data, view the results of qualification tests and view graphs and charts of various attributes of the data. NDMAS also has methods for the management of the data output from VHTR simulation models and data generated from experiments designed to verify and validate the simulation codes. These simulation models represent the outcome of mathematical representation of VHTR components and systems. The methods data management approaches described herein will handle data that arise from experiment, simulation, and external sources for the main purpose of facilitating parameter estimation and model verification and validation (V and V). A model integration environment entitled ModelCenter is used to automate the storing of data from simulation model runs to the NDMAS repository. This approach does not adversely change the why computational scientists conduct their work. The method is to be used mainly to store the results of model runs that need to be preserved for auditing purposes or for display to the NDMAS web portal. This interim report demonstrates the currently development of NDMAS for Methods data and discusses data and its qualification that is currently part of NDMAS.

  7. Commercial Parts Technology Qualification Processes

    Science.gov (United States)

    Cooper, Mark S.

    2013-01-01

    Many high-reliability systems, including space systems, use selected commercial parts (including Plastic Encapsulated Microelectronics or PEMs) for unique functionality, small size, low weight, high mechanical shock resistance, and other factors. Predominantly this usage is subjected to certain 100% tests (typically called screens) and certain destructive tests usually (but not always) performed on the flight lot (typically called qualification tests). Frequently used approaches include those documented in EEE-INST-002 and JPL DocID62212 (which are sometimes modified by the particular aerospace space systems manufacturer). In this study, approaches from these documents and several space systems manufacturers are compared to approaches from a launch systems manufacturer (SpaceX), an implantable medical electronics manufacturer (Medtronics), and a high-reliability transport system process (automotive systems). In the conclusions section, these processes are outlined for all of these cases and presented in tabular form. Then some simple comparisons are made. In this introduction section, the PEM technology qualification process is described, as documented in EEE-INST-002 (written by the Goddard Space Flight Center, GSFC), as well as the somewhat modified approach employed at the Jet Propulsion Laboratory (JPL). Approaches used at several major NASA contractors are also described

  8. Methods Data Qualification Interim Report

    Energy Technology Data Exchange (ETDEWEB)

    R. Sam Alessi; Tami Grimmett; Leng Vang; Dave McGrath

    2010-09-01

    The overall goal of the Next Generation Nuclear Plant (NGNP) Data Management and Analysis System (NDMAS) is to maintain data provenance for all NGNP data including the Methods component of NGNP data. Multiple means are available to access data stored in NDMAS. A web portal environment allows users to access data, view the results of qualification tests and view graphs and charts of various attributes of the data. NDMAS also has methods for the management of the data output from VHTR simulation models and data generated from experiments designed to verify and validate the simulation codes. These simulation models represent the outcome of mathematical representation of VHTR components and systems. The methods data management approaches described herein will handle data that arise from experiment, simulation, and external sources for the main purpose of facilitating parameter estimation and model verification and validation (V&V). A model integration environment entitled ModelCenter is used to automate the storing of data from simulation model runs to the NDMAS repository. This approach does not adversely change the why computational scientists conduct their work. The method is to be used mainly to store the results of model runs that need to be preserved for auditing purposes or for display to the NDMAS web portal. This interim report demonstrates the currently development of NDMAS for Methods data and discusses data and its qualification that is currently part of NDMAS.

  9. Advanced qualification methodology for actively cooled plasma facing components

    Science.gov (United States)

    Durocher, A.; Escourbiac, F.; Grosman, A.; Boscary, J.; Merola, M.; Cismondi, F.; Courtois, X.; Farjon, J. L.; Missirlian, M.; Schlosser, J.; Tivey, R.

    2007-12-01

    The use of high heat flux plasma facing components (PFCs) in steady state fusion devices requires high reliability. These components have to withstand heat fluxes in the range 10-20 MW m-2 involving a number of severe engineering constraints. Feedback from the experience of various industrial manufacturings showed that the bonding of the refractory armour material onto the metallic heat sink causes generic difficulties strongly depending on material qualities and specific design. As the heat exhaust capability and lifetime of PFCs during plasma operation are directly linked to the manufacturing quality, a set of qualification activities such as active infrared thermography, lock-in and acoustic measurements were performed during the component development phases following a qualification route. This paper describes the major improvements stemming from better measurement accuracy and refined data processing and analyses recent developments aimed at investigating the capability to qualify the component in situ during its lifetime.

  10. Advanced qualification methodology for actively cooled plasma facing components

    International Nuclear Information System (INIS)

    Durocher, A.; Escourbiac, F.; Grosman, A.; Boscary, J.; Merola, M.; Cismondi, F.; Courtois, X.; Farjon, J.L.; Missirlian, M.; Schlosser, J.; Tivey, R.

    2007-01-01

    The use of high heat flux plasma facing components (PFCs) in steady state fusion devices requires high reliability. These components have to withstand heat fluxes in the range 10-20 MW m -2 involving a number of severe engineering constraints. Feedback from the experience of various industrial manufacturings showed that the bonding of the refractory armour material onto the metallic heat sink causes generic difficulties strongly depending on material qualities and specific design. As the heat exhaust capability and lifetime of PFCs during plasma operation are directly linked to the manufacturing quality, a set of qualification activities such as active infrared thermography, lock-in and acoustic measurements were performed during the component development phases following a qualification route. This paper describes the major improvements stemming from better measurement accuracy and refined data processing and analyses recent developments aimed at investigating the capability to qualify the component in situ during its lifetime

  11. WTP Waste Feed Qualification: Glass Fabrication Unit Operation Testing Report

    Energy Technology Data Exchange (ETDEWEB)

    Stone, M. E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL). Hanford Missions Programs; Newell, J. D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL). Process Technology Programs; Johnson, F. C. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL). Engineering Process Development; Edwards, T. B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL). Engineering Process Development

    2016-07-14

    The waste feed qualification program is being developed to protect the Hanford Tank Waste Treatment and Immobilization Plant (WTP) design, safety basis, and technical basis by assuring waste acceptance requirements are met for each staged waste feed campaign prior to transfer from the Tank Operations Contractor to the feed receipt vessels inside the Pretreatment Facility. The Waste Feed Qualification Program Plan describes the three components of waste feed qualification: 1. Demonstrate compliance with the waste acceptance criteria 2. Determine waste processability 3. Test unit operations at laboratory scale. The glass fabrication unit operation is the final step in the process demonstration portion of the waste feed qualification process. This unit operation generally consists of combining each of the waste feed streams (high-level waste (HLW) and low-activity waste (LAW)) with Glass Forming Chemicals (GFCs), fabricating glass coupons, performing chemical composition analysis before and after glass fabrication, measuring hydrogen generation rate either before or after glass former addition, measuring rheological properties before and after glass former addition, and visual observation of the resulting glass coupons. Critical aspects of this unit operation are mixing and sampling of the waste and melter feeds to ensure representative samples are obtained as well as ensuring the fabrication process for the glass coupon is adequate. Testing was performed using a range of simulants (LAW and HLW simulants), and these simulants were mixed with high and low bounding amounts of GFCs to evaluate the mixing, sampling, and glass preparation steps in shielded cells using laboratory techniques. The tests were performed with off-the-shelf equipment at the Savannah River National Laboratory (SRNL) that is similar to equipment used in the SRNL work during qualification of waste feed for the Defense Waste Processing Facility (DWPF) and other waste treatment facilities at the

  12. Similarity principles for equipment qualification by experience

    International Nuclear Information System (INIS)

    Kana, D.D.; Pomerening, D.J.

    1988-07-01

    A methodology is developed for seismic qualification of nuclear plant equipment by applying similarity principles to existing experience data. Experience data are available from previous qualifications by analysis or testing, or from actual earthquake events. Similarity principles are defined in terms of excitation, equipment physical characteristics, and equipment response. Physical similarity is further defined in terms of a critical transfer function for response at a location on a primary structure, whose response can be assumed directly related to ultimate fragility of the item under elevated levels of excitation. Procedures are developed for combining experience data into composite specifications for qualification of equipment that can be shown to be physically similar to the reference equipment. Other procedures are developed for extending qualifications beyond the original specifications under certain conditions. Some examples for application of the procedures and verification of them are given for certain cases that can be approximated by a two degree of freedom simple primary/secondary system. Other examples are based on use of actual test data available from previous qualifications. Relationships of the developments with other previously-published methods are discussed. The developments are intended to elaborate on the rather broad revised guidelines developed by the IEEE 344 Standards Committee for equipment qualification in new nuclear plants. However, the results also contribute to filling a gap that exists between the IEEE 344 methodology and that previously developed by the Seismic Qualification Utilities Group. The relationship of the results to safety margin methodology is also discussed. (author)

  13. 5 CFR 302.403 - Qualifications for promotion.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Qualifications for promotion. 302.403... EMPLOYMENT IN THE EXCEPTED SERVICE Selection and Appointment; Reappointment; and Qualifications for Promotion § 302.403 Qualifications for promotion. In determining qualifications for promotion with respect to an...

  14. 49 CFR 180.507 - Qualification of tank cars.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Qualification of tank cars. 180.507 Section 180... QUALIFICATION AND MAINTENANCE OF PACKAGINGS Qualification and Maintenance of Tank Cars § 180.507 Qualification of tank cars. (a) Each tank car marked as meeting a “DOT” specification or any other tank car used...

  15. Training and qualification of inspectors

    International Nuclear Information System (INIS)

    Aro, I.; Anderson, R.; Ericsson, P.O.; Lee, I.

    1993-01-01

    A total of four workshop breakout sessions were conducted on this subject: one double session and three single sessions. The following discussion describes common points and difference among the countries in the areas of inspector training and qualifications. In most countries there are resident or non-resident site-specific inspectors who have general plant supervision duties. In addition, there are specialized inspectors who visit NPP when requested or according to the scheduled inspection program. Most countries try to recruit experienced personnel. Many countries prefer to have candidates who have extensive plant experience. Some countries do not recruit inspectors from utilities because of potential conflict of interest or credibility reasons. In many countries, the typical training time to become an independent inspector is one year. In some countries an inspector is formally certified after their training period and completion of an examination

  16. VHDL basics applied design by SIPAC qualification system

    International Nuclear Information System (INIS)

    Park, In Ha; Mun, Da Cheol; Lee, Gwang Yeob

    2005-12-01

    This book has six chapters, which are about Flowrian of SIPAC qualification system including internet CAD system and remote server service, logic circuit on design and qualification of device such as gate circuit, multiplex and decoder, order logic circuit with D type flip-flop design and qualification and Rom and RAM's design and qualification, finite state machine such as odd checker, sequence detector, test clock generator and traffic light controller, design and qualification about data path, design of application circuit. It has two appendixes on install and the way to use SIPAC qualification system and remote service for SIPAC qualification system.

  17. Equipment Qualification Data Base user manual

    International Nuclear Information System (INIS)

    Decker, Q.R.; Fackrell, L.J.; Fitch, L.R.; Meeky, O.B.

    1985-09-01

    This manual details the Equipment Qualification Data Base (EQDB), its usage, and contents. The EQDB consists of two files; the Plant Qualification File (PQF) and the Equipment Qualification File (EQF). The PQF contains plant specific environmental data and the EQF contains summaries of various test results. Two data management systems are used to manipulate the data and are discussed in this manual. SAS Institute System 2000 (S2K) is the management system for the PQF and Query Update (QU) is the operating system for the EQF. Each management system contains report writers. These writers and how to use them are discussed in detail in this manual

  18. Solar array qualification through qualified analysis

    Science.gov (United States)

    Zijdemans, J.; Cruijssen, H. J.; Wijker, J. J.

    1991-04-01

    To achieve qualification is in general a very expensive exercise. For solar arrays this is done by a dedicated test program through which final qualification is achieved. Due to severe competition on the solar array market, cheaper means are looked for to achieve a qualified product for the customers. One of the methods is to drastically limit the environmental test program and to qualify the solar-array structure against its environmental loads by analysis. Qualification by analysis is possible. The benefits are that a significant amount of development effort can be saved in case such a powerful tool is available. Extensive testing can be avoided thus saving time and money.

  19. Benefits of Digital Equipment Generic Qualification Activities

    International Nuclear Information System (INIS)

    Thomas, James E.; Steiman, Samuel C.

    2002-01-01

    As a result of nuclear power plant instrumentation and control obsolescence issues, there have been numerous activities during recent years relating to the qualification of digital equipment. Some of these activities have been 'generic' in nature in that the qualification was not limited to plant specific applications, but was intended to cover a broad base of potential applications of the digital equipment. These generic qualifications have been funded by equipment manufacturers and by utility groups and organizations. The generic activities sponsored by the Electric Power Research Institute (EPRI) have been pilot projects for an overall generic qualification approach. The primary benefit resulting from the generic qualification work to date is that a number of digital platforms and digital devices are now available for use in various nuclear safety-related applications. Many of the tests and evaluations necessary to support plant specific applications have been completed. The amount of data and documentation that each utility must develop on a case by case basis has been significantly reduced. There are also a number of additional benefits resulting from these industry efforts. The challenges and difficulties in qualifying digital equipment for safety-related applications are now more clearly understood. EPRI has published a lessons learned document (EPRI Report 1001452, Generic Qualification of Commercial Grade Digital Devices: Lessons Learned from Initial Pilots, which covers several different qualification areas, including device selection, project planning, vendor surveys and design reviews, and electromagnetic compatibility (EMC) qualification. Application of the experience and lessons learned from the EPRI pilot activities should help reduce the effort and cost required for future qualification work. Most generic qualification activities for commercial equipment have been conducted using the approach of EPRI TR-106439, Guideline on Evaluation and Acceptance

  20. QUALIFICATIONS FRAMEWORK DEVELOPMENT AND QUALIFICATIONS RATING IN THE LAND MANAGEMENT SPHERE

    Directory of Open Access Journals (Sweden)

    A. A. Myrasheva

    2014-01-01

    Full Text Available The aim of the research is to observe the existing approaches to qualifications framework development in the sphere of land management, cadastres and real estate management, as well as the qualifications framework adaptation to European system. The relevance of the issue is related to the specific professional and institutional problems facing Russian educational establishments engaged in personnel training in the given sphere. The authors demonstrate the qualifications framework development in the land management sector regarding it as a key mechanism of educational mobility and the router for knowledge acquisition and updates. The qualifications framework is referred to as a systematic and structured description of recognized qualifications. The accepted worldwide methodology of organizing the educational process and quality control system is given. The emphasis is on the need to comply the qualifications framework with the Russian State Educational Standards.

  1. Environmental/dynamic mechanical equipment qualification and dynamic electrical equipment qualification program (EDQP)

    International Nuclear Information System (INIS)

    Hunter, J.A.

    1984-01-01

    Equipment qualification research is being conducted to investigate acceptable criteria, requirements, and methodologies for the dynamic (including seismic) and environmental qualification of mechanical equipment and for the dynamic (including seismic) qualification of electrical equipment. The program is organized into three elements: (1) General Research, (2) Environmental Research, and (3) Dynamic Research. This paper presents the highlights of the results to date in these three elements of the program

  2. Qualification of γ-heating calculation in nuclear reactors

    International Nuclear Information System (INIS)

    Ravaux, Simon

    2013-01-01

    During the last few years, the γ-heating issue has gained in stature, mainly for the safety of the 3. generation reactors in which a stainless steel reflector is inserted. The purpose of this work is the qualification of the needed tools for calculation of the γ-heating in the nuclear reactors. In a nuclear reactor, all the photons are directly or indirectly produced by the neutron-matter interactions. Thus, the first phase of this work is a critical analysis of the photon production data in the standard nuclear data library. New evaluations have been proposed to the next version of the JEFF library after that some omissions have been found. They have partly been accepted for JEFF-3.2. Two particle-transport codes are currently developed in the CEA: the deterministic code APOLLO2 and the Monte Carlo code TRIPOLI4. The second part of this work is the qualification of both these codes by interpreting an integral experiment called PERLE. The experimental set-up is made by a LWR pin assembly surrounded by a stainless steel reflector in which the γ-heating is measured by Thermo-luminescent Detector (TLD). A calculation scheme has been proposed for both APOLLO2 and TRIPOLI4 in order to calculate the TLD's responses. Comparisons between calculations and measurements have shown that TRIPOLI4 gives a satisfactory estimation of the γ-heating in the reflector. These discrepancies are within the experimental 1 σ uncertainty. Before the qualification, APOLLO2 has been previously validated against TRIPOLI4 reference calculation. This validation gives an estimation of the bias due to the deterministic approximations of the transport equation resolution. The qualification has shown that the discrepancies between APOLLO2 predictions and TLD's measurements are in the same range as experimental uncertainties. (author) [fr

  3. Nuclear Criticality Safety Department Qualification Program

    International Nuclear Information System (INIS)

    Carroll, K.J.; Taylor, R.G.; Worley, C.A.

    1996-01-01

    The Nuclear Criticality Safety Department (NCSD) is committed to developing and maintaining a staff of highly qualified personnel to meet the current and anticipated needs in Nuclear Criticality Safety (NCS) at the Oak Ridge Y-12 Plant. This document defines the Qualification Program to address the NCSD technical and managerial qualification as required by the Y-1 2 Training Implementation Matrix (TIM). This Qualification Program is in compliance with DOE Order 5480.20A and applicable Lockheed Martin Energy Systems, Inc. (LMES) and Y-1 2 Plant procedures. It is implemented through a combination of WES plant-wide training courses and professional nuclear criticality safety training provided within the department. This document supersedes Y/DD-694, Revision 2, 2/27/96, Qualification Program, Nuclear Criticality Safety Department There are no backfit requirements associated with revisions to this document

  4. Visas and qualifications: Syrian refugees in Brazil

    Directory of Open Access Journals (Sweden)

    Gilberto M A Rodrigues

    2017-10-01

    Full Text Available Brazil’s humanitarian visa programme for Syrian refugees and its efforts to recognise their qualifications could offer lessons for refugee protection and integration across the region.

  5. Qualification of anticorrosive coatings in nuclear vessels

    International Nuclear Information System (INIS)

    Perez Flores, C.

    1985-01-01

    Test qualifications of the behavior of anticorrosive coating systems used in nuclear vessels in service and under the accident conditions of radiation decontamination, steam chemical resistance, thermal conductivity, weathering accelerated aging are presented and discussed. (author)

  6. Sport Management Interns--Selection Qualifications.

    Science.gov (United States)

    Cuneen, Jacquelyn; Sidwell, M. Joy

    1993-01-01

    Examines and rates the background qualifications and qualities, identified by sport management practitioners through an examination of paper credentials, that are desired in interviewees vying for selection into sport management internship positions. (GLR)

  7. Appointment, qualifications and responsibilities of ventilation officers

    International Nuclear Information System (INIS)

    1981-01-01

    The Code provides for the appointment of a ventilation officer when required by the appropriate authority. This guideline offers comment on the appointment, qualifications, training and responsibilities of that person

  8. Qualification and testing of CT systems

    DEFF Research Database (Denmark)

    Bartscher, Markus; Neuschaefer-Rube, Ulrich; Illemann, Jens

    2018-01-01

    This chapter focuses on system verification and conformance to specifications. System qualification is carried out to ensure that the system and itscomponents achieve the best performance—usually corresponding to the specificationsmade by the manufacturer. Acceptance and reverification testing ar...

  9. Emergency Management. Functional Area Qualification Standard

    National Research Council Canada - National Science Library

    2004-01-01

    .... In support of this goal, the competency requirements defined in the Technical Qualification Standards should be aligned with and integrated into the recruitment and staffing processes for technical positions...

  10. Materials qualification for nuclear power plants

    International Nuclear Information System (INIS)

    Braconi, F.

    1987-01-01

    The supply of materials to be used in the fabrication of components submitted to pressure destined to Atucha II nuclear power plant must fulfill the quality assurance requirements in accordance with the international standards. With the aim of promoting the national participation in CNA II, ENACE had the need to adapt these requirements to the national industry conditions and to the availability of official entities' qualification and inspection. As a uniform and normalized assessment for the qualification of materials did not exist in the country, ENACE had to develop a materials suppliers qualification system. This paper presents a suppliers qualification procedure, its application limits and the alternative procedures for the acceptance of individual stock and for the stock materials purchase. (Author)

  11. Qualification of organizations for independent technical supervision

    International Nuclear Information System (INIS)

    1981-04-01

    The requirements are established on trial for the qualification of an organization as an independent technical supervision organization in nuclear facilities, in activities related with quality assurance programs. (I.C.R.) [pt

  12. Establishment of nuclear equipment qualification system

    International Nuclear Information System (INIS)

    Joo, Po Kook; Lim, Nam Jin; Lee, Young Gun

    2003-04-01

    This study is carried out by KEARI(Korea Atomic Energy Research Institute) as the lead organization in cooperation with KIMM(Korea Institute of Machinery and Materials), KTL(Korea Testing Laboratory) and KRISS(Korea Research Institute of Standards and Science) to construct a basis of efficient management of nuclear equipment qualification business by expanding test equipment of each of participating organization, and developing qualification technologies. As for KIMM, control system of large scale shaker was replaced with advanced system, and LOCA(Loss of Coolant Accident) test facility was installed. KTL is now capable of conducting seismic tests of nuclear I and C as a result of installation of seismic test equipment during the first two project years. KRISS participated in the Project with a view to have large scale EMI test equipment and related technologies. In parallel with expansion of test equipment, a industrial-educational-research cooperation committee, as an intermediate step toward integrated equipment qualification system to maximize the usage of test equipment, was established and cooperation methods were investigated. As a result, Korea Nuclear Equipment Qualification Association, an corporate juridical person, was established. Research on development of thermal and radiation aging test technology of nuclear materials was carried out by Hanyang University and SECO(Saehan Engineering and Qualification Co., Ltd.). Integrated Equipment Qualification Database was developed which contains material test data, equipment qualification data and other EQ related informations. Standard qualification procedures were developed in order for test laboratories and manufacturers to establish design requirements and to efficiently perform tests

  13. Selection of equipment for equipment qualification

    International Nuclear Information System (INIS)

    Torr, K.G.

    1989-01-01

    This report describes the methodology applied in selecting equipment in the special safety systems for equipment qualification in the CANDU 600 MW nuclear generating stations at Gentilly 2 and Point Lepreau. Included is an explanation of the selection procedure adopted and the rationale behind the criteria used in identifying the equipment. The equipment items on the list have been grouped into three priority categories as a planning aid to AECB staff for a review of the qualification status of the special safety systems

  14. Qualification of safety-related valve actuators

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    This Standard describes the qualification of all types of power-driven valve actuators, including damper actuators, for safety-related functions in nuclear power generating stations. It may also be used to separately qualify actuator components. This Standard establishes the minimum requirements for, and guidance regarding, the methods and procedures for qualification of all safety-related functions of power-driven valve actuators

  15. Assessing mathematics within advanced school science qualifications

    OpenAIRE

    McAlinden, Mary; Noyes, Andrew

    2017-01-01

    Following sustained discussion regarding the relationship between advanced mathematics and science learning in England, the government has pursued a reform agenda in which mathematics is embedded in national, high stakes A-level science qualifications and their assessments for 18-year-olds. For example, A-level Chemistry must incorporate the assessment of relevant mathematics for at least 20% of the qualification. Other sciences have different mandated percentages. This embedding policy is ru...

  16. Ageing management and equipment qualification

    International Nuclear Information System (INIS)

    Stahl, Gunnar

    2014-01-01

    The knowledge of how the environment and load of organic material in general and especially polymers and lubricants, is affecting the degradation of important properties, have increased during the last decade. However the restrictions using established additives like some color pigments due to their poisonousness e.g. pigments based at cadmium, lead, mercury etc. have caused problems when replacing additives to polymers. The replacement additives have often been used in new design without going through the required material qualification procedure. There have also been observed that some non-qualified and non-approved materials have been installed in some power plants due to false documentation. There are also a lot of new manufacturers, of materials similar to the previously qualified materials, active at the market. This increases the difficulty to ensure that the required material quality is used. New materials, new additives and new manufacturers makes if more and more difficult to assure that the expected material is present. This causes more strict demands of how the new materials often used in equipment at type-testing and in replacement materials are analyzed and documented. By implementing new steps for chemical, mechanical and electrical analysis and increase the general quality assurance content this issue can be managed. (authors)

  17. Next Generation Qualification: Kinemetrics STS-5A Seismometer Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Merchant, Bion John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Slad, George William [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-10-01

    Sandia National Laboratories has tested and evaluated two seismometers, the STS-5A, manufactured by Kinemetrics. These seismometers measure three axes of broadband ground velocity using a UVW configuration with feedback control in a mechanically levelled borehole package. The purpose of the seismometer evaluation was to determine a measured sensitivity, response, self-noise, dynamic range, and self-calibration ability. The Kinemetrics STS-5A seismometers are being evaluated for the U.S. Air Force as part of their Next Generation Qualification effort.

  18. Radiological Control Technician: Standardized technician Qualification Standard

    International Nuclear Information System (INIS)

    1992-10-01

    The Qualification Standard states and defines the knowledge and skill requirements necessary for successful completion of the Radiological Control Technician Training Program. The standard is divided into three phases: Phase I concerns RCT Academic training. There are 13 lessons associated with the core academics program and 19 lessons associated with the site academics program. The staff member should sign the appropriate blocks upon successful completion of the examination for that lesson or group of lessons. In addition, facility specific lesson plans may be added to meet the knowledge requirements in the Job Performance Measures (JPM) of the practical program. Phase II concerns RCT core/site practical (JPMs) training. There are thirteen generic tasks associated with the core practical program. Both the trainer/evaluator and student should sign the appropriate block upon successful completion of the JPM. In addition, facility specific tasks may be added or generic tasks deleted based on the results of the facility job evaluation. Phase III concerns the oral examination board successful completion of the oral examination board is documented by the signature of the chairperson of the board. Upon completion of all of the standardized technician qualification requirements, final qualification is verified by the student and the manager of the Radiological Control Department and acknowledged by signatures on the qualification standard. The completed Qualification Standard shall be maintained as an official training record

  19. Unintended Consequences: How Qualification Constrains Innovation

    Science.gov (United States)

    Brice, Craig A.

    2011-01-01

    The development and implementation of new materials and manufacturing processes for aerospace application is often hindered by the high cost and long time span associated with current qualification procedures. The data requirements necessary for material and process qualification are extensive and often require millions of dollars and multiple years to complete. Furthermore, these qualification data can become obsolete for even minor changes to the processing route. This burden is a serious impediment to the pursuit of revolutionary new materials and more affordable processing methods for air vehicle structures. The application of integrated computational materials engineering methods to this problem can help to reduce the barriers to rapid insertion of new materials and processes. By establishing predictive capability for the development of microstructural features in relation to processing and relating this to critical property characteristics, a streamlined approach to qualification is possible. This paper critically examines the advantages and challenges to a modeling-assisted qualification approach for aerospace structural materials. An example of how this approach might apply towards the emerging field of additive manufacturing is discussed in detail.

  20. Equipment qualification testing - a practical approach

    International Nuclear Information System (INIS)

    Davies, G.A.; McDougall, R.I.; Poirier, M.P.

    1996-01-01

    When nuclear safety equipment is credited with a Required Safety Function it must properly perform that function to facilitate safe control and/or shutdown of the plant during a design basis accident. When such equipment is required to be environmentally (EQ) and/or seismically qualified (SQ) for safety related use in CANDU nuclear power plants, the preferred method of qualification is by type testing. The qualification testing process requires that the test specimen equipment be subjected to the aging stressors associated with the normal service conditions that it would experience during it's required qualified (or service) life. Following the aging process, the test specimen is in a condition representative of that in which it would be at the end of its service life in the plant. The test specimen is then subjected to a simulated accident during which it must satisfy performance requirements thereby demonstrating that it can perform its required safety function. The performance requirements specified for the qualification testing must be designed to ensure that satisfactory performance of the safety function is demonstrated during the qualification program. This paper provides descriptions of practical methods used in the deriving and satisfying of relevant performance requirements during the qualification testing of safety related equipment. (author)

  1. Effects of Student Characteristics, Principal Qualifications, and Organizational Constraints for Assessing Student Achievement: A School Public Relations and Human Resources Concern

    Science.gov (United States)

    Young, I. Phillip; Vang, Maiyoua; Young, Karen Holsey

    2008-01-01

    Standards-based student achievement scores are used to assess the effectiveness of public education and to have important implications regarding school public relations and human resource practices. Often overlooked is that these scores may be moderated by the characteristics of students, the qualifications of principals, and the restraints…

  2. On safety 1E qualification of electrical equipment for nuclear power stations

    International Nuclear Information System (INIS)

    Segarceanu, D.; Geambasu, C.; Avramescu, M.

    1995-01-01

    Electrical equipment and systems for the emergency shutdown of a nuclear reactor are qualified according to safety class 1E. Methods of qualification meeting the requirements should be used, either individually or in combination include, type-test qualification, qualification by operating experience, qualification by analysis, combined qualification. These methods qualification principles, procedures and documents are discussed. (N.T.). 1 fig

  3. SRS H1616 Hydride Transport Vessel Qualification Report

    International Nuclear Information System (INIS)

    Smith, A.C.

    1999-01-01

    This report serves as the design qualification basis for both transport and facility use. Headings identify report sections as containing qualification information for transport use, facility use, or both transport and facility use

  4. SRS H1616 Hydride Transport Vessel Qualification Report

    International Nuclear Information System (INIS)

    Van Alstine, M.N.

    1998-01-01

    This report serves as the design qualification basis for both transport and facility use. Headings identify report sections as containing qualification information for transport use, facility use, or both transport and facility use

  5. Global Trend In The Qualifications Of Medical Educators | Issa ...

    African Journals Online (AJOL)

    NPMCN) or its equivalents is the highest educational and professional qualification of clinical Medical Educators in Nigeria while PhD is the acceptable highest qualification for their basic medical sciences counterparts. This had been the status ...

  6. T25 Qualification of old containers

    International Nuclear Information System (INIS)

    Hoerning, T.; Kasparek, E.M.; Voelzke, H.

    2013-01-01

    Radioactive waste for final disposal in the repository Konrad has to be packaged in licensed containers. The qualification of containers is performed according the respective standards and BfS requirements. The latter ones differ for different container types with respect to accident resistance based on the release behavior of the waste. Usually qualification of container types is performed before series production. The qualification of already produced containers (''old containers'') is significantly more complicated. The differences of quality assurance and materials properties of the older containers have to be evaluated. A main tool for this evaluation is the numerical re-calculation of accident scenarios for estimation of the safety margins. The validation of appropriate finite element models is available. Based on these date it might be possible to abandon additional drop tests with the existing old containers to prove the structural integrity.

  7. Changing nature of equipment and parts qualification

    International Nuclear Information System (INIS)

    Bucci, R.M.

    1988-01-01

    Ideally, the original supplier of a piece of nuclear safety-related equipment has performed a qualification program and will continue to support that equipment throughout the lifetime of the nuclear power plants in which in equipment is installed. The supplier's nuclear quality assurance program will be maintained and he will continue to offer all necessary replacement parts. These parts will be identical to the original parts, certified to the original purchase order requirements, and the parts will be offered at competitive prices. Due to the changing nature of the nuclear plant equipment market, however, one or more of those ideal features are frequently unavailable when safety-related replacement equipment or parts are required. Thus, the process of equipment and parts qualification has had to adjust in order to ensure obtaining qualified replacements when needed. This paper presents some new directions taken in the qualification of replacement equipment and parts to meet changes in the marketplace

  8. LTP fibre injector qualification and status

    International Nuclear Information System (INIS)

    Bogenstahl, J; Cunningham, L; Fitzsimons, E D; Hough, J; Killow, C J; Perreur-Lloyd, M; Robertson, D; Rowan, S; Ward, H

    2009-01-01

    This paper presents the current state of the LISA Technology Package (LTP) fibre injector qualification project in terms of vibration and shock tests. The fibre injector is a custom built part and therefore must undergo a full space qualification process. The mounting structure and method for sinusoidal vibration and random vibration tests as well as shock tests will be presented. Furthermore a proposal will be presented to use the fibre injector pair qualification model to build an optical prototype bench. The optical prototype bench is a full-scale model of the flight model. It will be used for development and rehearsal of all the assembly stages of the flight model and will provide an on-ground simulator for investigation as an updated engineering model.

  9. Teacher qualification and the achievement gap in early primary grades.

    Directory of Open Access Journals (Sweden)

    Donald Easton-Brooks

    2009-08-01

    Full Text Available Title I of the No Child Left Behind Act (P.L. 107-110, 115 Stat. 1245, 2002 holds schools accountable for reducing the academic achievement gap between the different ethnic groups and requires elementary school teachers to have at least a bachelors degree and a state certification. The purpose of this study was to examine the relationship of the qualification requirement of NCLB to the goal of reducing the academic achievement gap. The study found that students with a certified teacher for most of their early school experience scored higher in reading than students who did not have a certified teacher. In addition, certification was associated with slightly narrowing the academic gap between African American and European American students across early elementary grades.

  10. Towards a systematic format for (seismic) equipment qualification standards

    International Nuclear Information System (INIS)

    Smith, P.D.

    1982-01-01

    As part of technical assistance to the US Nuclear Regulatory Commission (NRC, 1), a systematic format for seismic equipment qualification (EQ) was initiated. This format consists of thirty issues associated with seismic EQ. Each issue was considered as a Category of Possible Seismic EQ Requirements and Criteria. That is, seismic EQ standards might be (but presently are not formulated in terms of requirements and criteria that address each of the thirty issues. Each of the thirty issues was ranked and a minimum set identified. The current requirements in existing NRC and national standards were also evaluated against this common set of issues, and they were estimated to score 60 out of 100 overall. It is believed that the systematic format exhibited in this paper can be of assistance in obtaining a broader and more complete perspective on seismic EQ issues. This format (but especially the technique) may also be of interest in non-seismic EQ since many of the issues are common

  11. Integrated Information System for Higher Education Qualifications

    Directory of Open Access Journals (Sweden)

    Catalin Ionut SILVESTRU

    2012-10-01

    Full Text Available In the present article we aim to study thoroughly and detail aspects related to architectures specific for e-learning and management of human resources training interconnected to management of qualifications. In addition, we take into consideration combining e-learning architectures with software in an e-learning system interconnected with the National Registry of Qualifications of Higher Education, in view of developing and information system that correlates educational supply from higher education from Romania with labor market demands through qualifications. The scientific endeavor consists of original architectural solutions to integrate data, systems, processes, services from various sources and to use them in the proposed system. The practical result of the scientific endeavor is represented by design of architectures required for developing an e-learning system interconnected with the National Registry of Qualifications from Romania, which involve in first stage the qualifications provided by higher education. The proposed innovative solution consists in the fact that the proposed information system combines the advantages of content management system (CMS with learning content management system (LCMS and with reusable learning objects (RLO. Thus, the architecture proposed in the research ensures the integration of a content management system with a portal for information, guidance and support in making a professional project. The integration enables correlation of competences with content areas and specific items from various teaching subjects, thus evaluating the usefulness for this registry from learning/educational perspective. Using the proposed information system in enables correlation among qualifications, content of educational program and continuous self-evaluation opportunities, which facilitate monitoring of progress and adjustment of learning content.

  12. Safety review for seismic qualification on nuclear power plant equipment

    International Nuclear Information System (INIS)

    Fang Qingxian

    1995-01-01

    The standards and requirements for seismic qualification of nuclear power plant's component have been fully addressed, including the scope of seismic qualification, the approach and the method of common seismic qualification, the procedure of the seismic tests, and the criteria for the seismic qualification review. The problems discovered in the safety review and the solution for these problems and some other issues are also discussed

  13. Equipment qualification testing methodology research at Sandia Laboratories

    International Nuclear Information System (INIS)

    Jeppesen, D.

    1983-01-01

    The Equipment Qualification Research Testing (EQRT) program is an evolutionary outgrowth of the Qualification Testing Evaluation (QTE) program at Sandia. The primary emphasis of the program has been qualification methodology research. The EQRT program offers to the industry a research-oriented perspective on qualification-related component performance, as well as refinements to component testing standards which are based upon actual component testing research

  14. Qualification of nuclear power plant operations personnel

    International Nuclear Information System (INIS)

    1984-01-01

    With the ultimate aim of reducing the possibility of human error in nuclear power plant operations, the Guidebook discusses the organizational aspects, the staffing requirements, the educational systems and qualifications, the competence requirements, the ways to establish, preserve and verify competence, the specific aspects of personnel management and training for nuclear power plant operations, and finally the particular situations and difficulties to be overcome by utilities starting their first nuclear power plant. An important aspect presented in the Guidebook is the experience in training and qualification of nuclear power plant personnel in various countries: Argentina, Belgium, Canada, Czechoslovakia, France, Federal Republic of Germany, Spain, Sweden, United Kingdom and United States of America

  15. Qualification issues: the rest of the iceberg

    International Nuclear Information System (INIS)

    Bonzon, L.L.; Luna, R.E.

    1978-01-01

    Reactor safety has been a primary concern since the beginning of commercial power reactor development. But only since the IEEE became actively involved (circa-1970), through IEEE-323-1971 and its predecessor drafts, has the qualification of selected Class 1 equipment been formalized and intensified. Currently EPRI and the USNRC are funding significant qualification research programs. However, these current research topics address only a few of the issues and there are more to come. A review of recent achievements and a discussion of some issues still to be encountered are presented

  16. Minimum qualifications for nuclear criticality safety professionals

    International Nuclear Information System (INIS)

    Ketzlach, N.

    1990-01-01

    A Nuclear Criticality Technology and Safety Training Committee has been established within the U.S. Department of Energy (DOE) Nuclear Criticality Safety and Technology Project to review and, if necessary, develop standards for the training of personnel involved in nuclear criticality safety (NCS). The committee is exploring the need for developing a standard or other mechanism for establishing minimum qualifications for NCS professionals. The development of standards and regulatory guides for nuclear power plant personnel may serve as a guide in developing the minimum qualifications for NCS professionals

  17. 5 CFR 317.502 - Qualifications Review Board certification.

    Science.gov (United States)

    2010-01-01

    ... REGULATIONS EMPLOYMENT IN THE SENIOR EXECUTIVE SERVICE Career Appointments § 317.502 Qualifications Review Board certification. (a) A Qualification Review Board (QRB) convened by OPM must certify the executive... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Qualifications Review Board certification...

  18. 14 CFR 121.453 - Flight engineer qualifications.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Flight engineer qualifications. 121.453... REQUIREMENTS: DOMESTIC, FLAG, AND SUPPLEMENTAL OPERATIONS Crewmember Qualifications § 121.453 Flight engineer qualifications. (a) No certificate holder may use any person nor may any person serve as a flight engineer on an...

  19. 49 CFR 214.351 - Training and qualification of flagmen.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Training and qualification of flagmen. 214.351... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY Roadway Worker Protection § 214.351 Training and qualification of flagmen. (a) The training and qualification for roadway workers assigned the...

  20. Allegheny County Walk Scores

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Walk Score measures the walkability of any address using a patented system developed by the Walk Score company. For each 2010 Census Tract centroid, Walk Score...

  1. Qualification of the AUTOBUS Mod. 2 Code

    International Nuclear Information System (INIS)

    Ciarniello, U.; Peroni, P.

    1988-01-01

    The paper presents the qualification of AUTOBUS MOD.2 code. After a brief description of the code itself, all the critical experiments simulated by the code are illustrated to prove the accuracy of criticality calculation and power distribution. An interpretation of the results and a conclusion close this presentation

  2. Qualifications and Skills: The Organisational Perspective

    Science.gov (United States)

    Dafou, Efthimia

    2009-01-01

    This paper portrays the inferences that employers in Greece draw from particular aspects of study programmes, as recorded on educational qualifications. Based on semi-structured interviews with human resource managers in 37 industrial and service organisations and general directors of careers offices in eight higher education institutions, and…

  3. The Diploma Disease. Education, Qualification and Development.

    Science.gov (United States)

    Dore, Ronald

    The aims and motives of schooling are changing, and it is becoming more and more a ritualized process of qualification-earning. The underlying causes of this change are traced through the education histories of Britain, Japan, Sri Lanka, and Kenya. It is illustrated that the competitve scramble for scarce modern jobs has created a "backwash…

  4. Buried Waste Program (BWP) data qualification manual

    International Nuclear Information System (INIS)

    Casey, C.; Larson, R.A.; Harris, G.A.

    1989-06-01

    The Data Qualification Manual (DQM) has been developed to discuss the process required to qualify data generated for the Buried Waste Program (BWP). The data from the BWP tasks conducted at the Radioactive Waste Management Complex (RWMC) and elsewhere will lead to remedial decisions being made which are governed by federal regulations administered by the Environmental Protection Agency (EPA). Data qualification is the process of insuring that only data of planned and known qualities are used to make a decision or answer a question. Although it is the Data Integrity Review Committee's (DIRC) responsibility to insure that the quality of all BWP data is ultimately verified and validated, all personnel who participate in the data gathering process will affect the quality of the data and must be responsible for knowing what is required to produce data of the planned quality. Therefore this manual is addressed to all participants in a data-gathering task. This manual discusses requirements to support data qualification in several areas, including: the sampling and analysis plan; data quality objectives and PARCC goals; sample custody documentation; quality assurance; assembly of the data qualification package; and existing data. 23 refs., 4 figs., 6 tabs

  5. STEM Leadership Qualification: Tomorrow's Leaders Today

    Science.gov (United States)

    Williams, Chris

    2009-01-01

    This article features the Science, Technology, Engineering and Mathematics (STEM) Leadership Qualification programme, developed by the Centre for Science Education (CSE) at Sheffield Hallam University in collaboration with Edexcel, which sets out to develop leadership skills and capabilities through contexts in STEM. With six units to complete…

  6. Relationship Between Teachers\\' Qualification And Students ...

    African Journals Online (AJOL)

    It has been observed that students\\' performance in technical subjects is very poor. Coupled with this problem is that of lack of qualified technical teachers. This study determines the relationship between teachers\\' qualification and students\\' performance in technical subjects in selected schools in northern Nigeria.

  7. PR Faculty: What Are Their Qualifications?

    Science.gov (United States)

    Johnson, Thomas B.; Rabin, Kenneth

    1977-01-01

    Discusses a study designed to determine existing trends in the backgrounds and qualifications of public relations instructors and how these might affect public relations education. Available from: Public Relations Review, Ray Hiebert, Dean, College of Journalism, University of Maryland, College Park, MD 20742. (MH)

  8. 5 CFR 330.208 - Qualification requirements.

    Science.gov (United States)

    2010-01-01

    ... perform the duties and responsibilities of the position. (c) The sex of an individual may not be... qualified for a position if he or she: (1) Meets OPM-established or approved qualification standards and requirements for the position, including any minimum educational requirements, and any selection placement...

  9. 42 CFR 485.705 - Personnel qualifications.

    Science.gov (United States)

    2010-10-01

    ... Physical Therapy and Speech-Language Pathology Services § 485.705 Personnel qualifications. (a) General... involved in the furnishing of outpatient physical therapy, occupational therapy, and speech-language...) of the Act and the requirements in part 484 of this chapter. (2) For a speech-language pathologist...

  10. 15 CFR 40.2 - Qualifications.

    Science.gov (United States)

    2010-01-01

    ... Qualifications. (a) To be eligible for a training grant at the Bureau of the Census the applicant must be: (1) A... training programs. (2) Able to speak, read, write, and understand the English language. (3) Sponsored by his government either directly with the United States or through a public international agency. (4...

  11. PROBLEMS OF QUALIFICATION OF MEDIATHION IN BRIBERY

    Directory of Open Access Journals (Sweden)

    Alexander Uskin

    2015-12-01

    Full Text Available The article analysed the controversial issues of qualification of actions of the intermediary in bribery under article 291.1 of the Criminal code, are the kinds of mediation depending on the subject of bribes. On the basis of analysis of legislative construction is concluded decriminalize mediation in bribery if the bribe amount is less than 25 thousand rubles.

  12. AGC-2 Irradiation Data Qualification Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Laurence C. Hull

    2012-07-01

    The Graphite Technology Development Program will run a series of six experiments to quantify the effects of irradiation on nuclear grade graphite. The second Advanced Graphite Creep (AGC) experiment (AGC-2) began with Advanced Test Reactor (ATR) Cycle 149A on April 12, 2011, and ended with ATR Cycle 151B on May 5, 2012. The purpose of this report is to qualify AGC-2 irradiation monitoring data following INL Management and Control Procedure 2691, Data Qualification. Data that are Qualified meet the requirements for data collection and use as described in the experiment planning and quality assurance documents. Data that do not meet the requirements are Failed. Some data may not quite meet the requirements, but may still provide some useable information. These data are labeled as Trend. No Trend data were identified for the AGC-2 experiment. All thermocouples functioned throughout the AGC-2 experiment. There was one instance where spurious signals or instrument power interruption resulted in a recorded temperature value being well outside physical reality. This value was identified and labeled as Failed data. All other temperature data are Qualified. All helium and argon gas flow data are within expected ranges. Total gas flow was approximately 50 sccm through the capsule. Helium gas flow was briefly increased to 100 sccm during reactor shutdown. All gas flow data are Qualified. At the start of the experiment, moisture in the outflow gas line increased to 200 ppmv then declined to less than 10 ppmv over a period of 5 days. This increase in moisture coincides with the initial heating of the experiment and drying of the system. Moisture slightly exceeded 10 ppmv three other times during the experiment. While these moisture values exceed the 10 ppmv threshold value, the reported measurements are considered accurate and to reflect moisture conditions in the capsule. All moisture data are Qualified. Graphite creep specimens are subjected to one of three loads, 393 lbf

  13. AGR-2 Data Qualification Interim Report

    Energy Technology Data Exchange (ETDEWEB)

    Michael L. Abbott

    2010-09-01

    Projects for the very high temperature reactor (VHTR) Technology Development Office program provide data in support of Nuclear Regulatory Commission licensing of the VHTR. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high temperature and high fluence environments. The VHTR program established the NGNP Data Management and Analysis System (NDMAS) to manage and document VHTR data qualification, for storage of the data in a readily accessible electronic form, and to assist in the analysis and presentation of the data. This document gives the status of NDMAS processing and qualification of data associated with the initial reactor cycle (147A) of the second Advanced Gas Reactor (AGR-2) experiment which began on June 21, 2010. Because it is early in the AGR-2 experiment, data from only two AGR-2 data streams are reported on: Fuel Fabrication and Fuel Irradiation data. As of August 1, 2010, approximately 311,000 irradiation data records have been stored in NDMAS, and qualification tests are in progress. Preliminary information indicates that TC 2 in Capsule 2 failed prior to start of the experiment, and NDMAS testing has thus far identified only two invalid data values from the METSO data collection system Data from the Fission Product Monitoring System (FPMS) are not currently processed until after reactor cycle shutdown and have not yet been received. A description of the ATR operating conditions data associated with the AGR-2 experiment (e.g., power levels) are summarized in the AGR-1 data qualification report (INL/EXT-09-16460). Since ATR data are collected under ATR program data quality requirements (i.e., outside the VHTR program), the NGNP program and NDMAS do not take additional actions to qualify these data other than NDMAS capture testing. Data qualification of graphite characterization data collected under the Graphite Technology Development Project is reported in a separate status report (Hull 2010).

  14. AGR-2 Data Qualification Interim Report

    International Nuclear Information System (INIS)

    Abbott, Michael L.

    2010-01-01

    Projects for the very high temperature reactor (VHTR) Technology Development Office program provide data in support of Nuclear Regulatory Commission licensing of the VHTR. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high temperature and high fluence environments. The VHTR program established the NGNP Data Management and Analysis System (NDMAS) to manage and document VHTR data qualification, for storage of the data in a readily accessible electronic form, and to assist in the analysis and presentation of the data. This document gives the status of NDMAS processing and qualification of data associated with the initial reactor cycle (147A) of the second Advanced Gas Reactor (AGR-2) experiment which began on June 21, 2010. Because it is early in the AGR-2 experiment, data from only two AGR-2 data streams are reported on: Fuel Fabrication and Fuel Irradiation data. As of August 1, 2010, approximately 311,000 irradiation data records have been stored in NDMAS, and qualification tests are in progress. Preliminary information indicates that TC 2 in Capsule 2 failed prior to start of the experiment, and NDMAS testing has thus far identified only two invalid data values from the METSO data collection system Data from the Fission Product Monitoring System (FPMS) are not currently processed until after reactor cycle shutdown and have not yet been received. A description of the ATR operating conditions data associated with the AGR-2 experiment (e.g., power levels) are summarized in the AGR-1 data qualification report (INL/EXT-09-16460). Since ATR data are collected under ATR program data quality requirements (i.e., outside the VHTR program), the NGNP program and NDMAS do not take additional actions to qualify these data other than NDMAS capture testing. Data qualification of graphite characterization data collected under the Graphite Technology Development Project is reported in a separate status report (Hull 2010).

  15. AGR-1 Data Qualification Interim Report

    International Nuclear Information System (INIS)

    Abbott, Machael

    2009-01-01

    Projects for the very-high-temperature reactor (VHTR) program provide data in support of Nuclear Regulatory Commission licensing of the VHTR. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high temperature and high fluence environments. The VHTR Program has established the NGNP Data Management and Analysis System (NDMAS) to ensure that VHTR data are (1) qualified for use, (2) stored in a readily accessible electronic form, and (3) analyzed to extract useful results. This document focuses on the first NDMAS objective. It describes the data streams associated with the first Advanced Gas Reactor (AGR-1) experiment, the processing of these data within NDMAS, and reports the interim FY09 qualification status of the AGR-1 data to date. Data qualification activities within NDMAS for specific types of data are determined by the data qualification category, which is assigned by the data generator, and include: (1) capture testing, to confirm that the data stored within NDMAS are identical to the raw data supplied, (2) accuracy testing, to confirm that the data are an accurate representation of the system or object being measured, and (3) documentation that the data were collected under an NQA-1 or equivalent QA program. The interim qualification status of the following four data streams is reported in this document: (1) fuel fabrication data, (2) fuel irradiation data, (3) fission product monitoring system (FPMS) data, and (4) Advanced Test Reactor (ATR) operating conditions data. A final report giving the NDMAS qualification status of all AGR-1 data (including cycle 145A) is planned for February 2010

  16. Politics in food markets: alternative modes of qualification and engaging

    Directory of Open Access Journals (Sweden)

    Daniel Carvalho de Rezende

    2014-06-01

    Full Text Available Consumers are increasingly practicing an alternative model of politics when they make food choices influenced by civic concerns. The new markets that emerge in this context carry specific modes of qualification that makes food products valuable not only for their intrinsic properties, but also for features associated with their production and distribution. This paper aims to describe the different modes of political qualification and consumer engagement that operate in food markets based on secondary data collected in papers, books, certification norms, and websites. Three distinct "political food markets" are identified: a Fair Trade; b sustainable agriculture; and c vegetarian. Whilst the latter is based on a boycott of "bad" products, the other two focus on "good" alternatives. Different types of political engagement are associated to these markets, ranging from a delegation form in Fair Trade, empowered consumption in sustainable agriculture, to a lifestyle engagement regarding vegetarianism. Market devices such as certification play a major role in the growth of these markets, but also affect the type of engagement that is solicited from consumers.

  17. Seismic qualification of piping systems based on strain criteria

    International Nuclear Information System (INIS)

    Peters, K.; Rangette, A.

    1988-01-01

    Typical LMFBR piping is characterized by elevated temperature and low pressure levels. Taking into account operational conditions only these characteristics demand for and allow flexible piping design. The overestimation of the damage potential of seismic loading by e.g. improper failure criteria usually contradicts operational needs producing the known result of excessive ''snubberism'' and reduction of operational margins. As a matter of fact, due to its transiency seismic loading is essentially secondary provoking the natural design requirement ductility instead of stiffness and rigidity - i.e. exclusion of failure by strain control instead of stress control - and thus avoiding the LMFBR typical competition between operational needs and seismic qualification. The design requirement ductility needs judgement mechanisms, i.e. suitable load descriptions, allowed strain levels and strain evaluation tools. A simplified method for strain range estimation and the underlying basic ideas are roughly outlined. The status of verification and experience gained so far is described. The results achieved suggest that the qualification of piping based on ductility requirement controlled by strain criteria is not out of reach. (author)

  18. An Objective Fluctuation Score for Parkinson's Disease

    Science.gov (United States)

    Horne, Malcolm K.; McGregor, Sarah; Bergquist, Filip

    2015-01-01

    Introduction Establishing the presence and severity of fluctuations is important in managing Parkinson’s Disease yet there is no reliable, objective means of doing this. In this study we have evaluated a Fluctuation Score derived from variations in dyskinesia and bradykinesia scores produced by an accelerometry based system. Methods The Fluctuation Score was produced by summing the interquartile range of bradykinesia scores and dyskinesia scores produced every 2 minutes between 0900-1800 for at least 6 days by the accelerometry based system and expressing it as an algorithm. Results This Score could distinguish between fluctuating and non-fluctuating patients with high sensitivity and selectivity and was significant lower following activation of deep brain stimulators. The scores following deep brain stimulation lay in a band just above the score separating fluctuators from non-fluctuators, suggesting a range representing adequate motor control. When compared with control subjects the score of newly diagnosed patients show a loss of fluctuation with onset of PD. The score was calculated in subjects whose duration of disease was known and this showed that newly diagnosed patients soon develop higher scores which either fall under or within the range representing adequate motor control or instead go on to develop more severe fluctuations. Conclusion The Fluctuation Score described here promises to be a useful tool for identifying patients whose fluctuations are progressing and may require therapeutic changes. It also shows promise as a useful research tool. Further studies are required to more accurately identify therapeutic targets and ranges. PMID:25928634

  19. Development Of A Macro-Batch Qualification Strategy For The Hanford Tank Waste Treatment And Immobilization Plant

    International Nuclear Information System (INIS)

    Herman, Connie C.

    2013-01-01

    following: Collection and characterization of samples for relevant process analytes from the tanks to be blended during the staging process; Initiation of qualification activities earlier in the staging process to optimize the campaign composition through evaluation from both a processing and glass composition perspective; Definition of the parameters that are important for processing in the WTP facilities (unit operations) across the anticipated range of wastes and as they relate to qualification-scale equipment; Performance of limited testing with simulants ahead of the waste feed qualification sample demonstration as needed to determine the available processing window for that campaign; and Demonstration of sufficient mixing in the staging tank to show that the waste qualification sample chemical and physical properties are representative of the transfers to be made to WTP. Potential flowcharts for derivatives of the Hanford waste feed qualification process are also provided in this report. While these recommendations are an extension of the existing WTP waste qualification program, they are more in line with the processes currently performed for SRS. The implementation of these processes at SRS has been shown to offer flexibility for processing, having identified potential processing issues ahead of the qualification or facility processing, and having provided opportunity to optimize waste loading and throughput in the DWPF

  20. Novel qualification methodology for subsea processing

    Energy Technology Data Exchange (ETDEWEB)

    Nilsen, Paal Jahre; Bratfos, Hans A. [Det Norske Veritas, Oslo (Norway)

    2004-07-01

    The purpose of the Reliability Analysis is to quantify the overall reliability of the technology to confirm that the functional requirements and the target reliability laid down in the Qualification Basis are met. On this basis DNV may issue a Statement of Fitness for Service affirming that the technology is considered qualified. Although a technology may be convincingly proven fit for service without using reliability measures, a quantified reliability makes the technology more competitive in a business where profitability is directly related to the reliability of the technology. In this respect it should also be noted that a reliability analysis require specific input data that sometimes must be derived by testing. It is therefore important to take this into consideration already in the selection and planning of qualification methods. (author)

  1. Development of nuclear equipment qualification technology

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Heon O; Kim, Wu Hyun; Kim, Jin Wuk; Kim, Jeong Hyun; Lee, Jeong Kyu; Kim, Yong Han; Jeong, Hang Keun [Korea Institute of Machinery and Materials, Taejon (Korea)

    1999-03-01

    In order to enhance testing and evaluation technologies, which is one of the main works of the Chanwon branch of KIMM(Korea Institute of Machinery and Materials), in addition to the present work scope of the testing and evaluation in the industrial facilities such as petroleum and chemical, plants, the qualification technologies of the equipments important to safety used in the key industrial facilities such as nuclear power plants should be localized: Equipments for testing and evaluation is to be set up and the related technologies must be developed. In the first year of this study, of vibration aging qualification technologies of equipments important to safety used in nuclear power plants have been performed. (author). 27 refs., 81 figs., 17 tabs.

  2. Essential elements of an effective data qualification

    International Nuclear Information System (INIS)

    Jenkins, E.W.

    1994-01-01

    Before data is used in any statistical evaluation, it should be subjected to a thorough data qualification to ensure its integrity. Data Qualification efforts may vary in scope but should all contain certain basic elements. Outliers should be eliminated so that any estimates obtained from the data will not be overly biased. Plots may be generated to uncover potential outliers, and these observations can be confirmed as being anomalous through the use of statistical testing. Non-stationarity of the data (i.e., time trends) may also be initially identified through the use of plots and confirmed by the results of statistical analyses, e.g., the use of the Kendall's tau statistic. When the dataset has been qualified, replicates and duplicates should be averaged to create a pseudo-independence between data points. An algorithm based on the groundwater data from the Savannah River Site has been used by the Applied Statistics Group at Westinghouse Savannah River Company for this

  3. Equipment qualification research program: program plan

    International Nuclear Information System (INIS)

    Dong, R.G.; Smith, P.D.

    1982-01-01

    The Lawrence Livermore National Laboratory (LLNL) under the sponsorship of the US Nuclear Regulatory Commission (NRC) has developed this program plan for research in equipment qualification (EQA). In this report the research program which will be executed in accordance with this plan will be referred to as the Equipment Qualification Research Program (EQRP). Covered are electrical and mechanical equipment under the conditions described in the OBJECTIVE section of this report. The EQRP has two phases; Phase I is primarily to produce early results and to develop information for Phase II. Phase I will last 18 months and consists of six projects. The first project is program management. The second project is responsible for in-depth evaluation and review of EQ issues and EQ processes. The third project is responsible for detailed planning to initiate Phase II. The remaining three projects address specific equipment; i.e., valves, electrical equipment, and a pump

  4. High Temperature Materials Interim Data Qualification Report

    International Nuclear Information System (INIS)

    Lybeck, Nancy

    2010-01-01

    Projects for the very high temperature reactor (VHTR) Technology Development Office provide data in support of Nuclear Regulatory Commission licensing of the VHTR. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high temperature and high fluence environments. The VHTR program has established the NGNP Data Management and Analysis System (NDMAS) to ensure that VHTR data are qualified for use, stored in a readily accessible electronic form, and analyzed to extract useful results. This document focuses on the first NDMAS objective. It describes the High Temperature Materials characterization data stream, the processing of these data within NDMAS, and reports the interim FY2010 qualification status of the data. Data qualification activities within NDMAS for specific types of data are determined by the data qualification category assigned by the data generator. The High Temperature Materials data are being collected under NQA-1 guidelines, and will be qualified data. For NQA-1 qualified data, the qualification activities include: (1) capture testing, to confirm that the data stored within NDMAS are identical to the raw data supplied, (2) accuracy testing to confirm that the data are an accurate representation of the system or object being measured, and (3) documenting that the data were collected under an NQA-1 or equivalent Quality Assurance program. Currently, data from two test series within the High Temperature Materials data stream have been entered into the NDMAS vault: (1) Tensile Tests for Sm (i.e., Allowable Stress) Confirmatory Testing - 1,403,994 records have been inserted into the NDMAS database. Capture testing is in process. (2) Creep-Fatigue Testing to Support Determination of Creep-Fatigue Interaction Diagram - 918,854 records have been processed and inserted into the NDMAS database. Capture testing is in process.

  5. Qualification of contractor/consultant instructors

    International Nuclear Information System (INIS)

    Hanson, H.D.

    1985-01-01

    Following a brief discussion of the role of consultant instructors in Public Service Electric and Gas Company's training organization, the qualification process is presented. Consultant instructors are provided with information regarding supervision of the trainees and the instructional process and procedures required. Each individual must have his or her instructional capability, supervisory skills and technical competence verified and documented prior to conducting training independently. Concluding comments describe the overall satisfactory experience with this program

  6. The DWPF waste form qualification program

    International Nuclear Information System (INIS)

    Marra, S.L.; Plodinec, M.J.

    1994-01-01

    Prior to the introduction of radioactive feed into the Defense Waste Processing Facility for immobilization in borosilicate glass an extensive waste qualification program must be completed. The DWPF must demonstrate its ability to comply with the Waste Acceptance Product Specifications. This ability is being demonstrated through laboratory and pilot scale work and will be completed after the full operation of the DWPF using various simulated feeds

  7. Qualification standard for photovoltaic concentrator modules

    Energy Technology Data Exchange (ETDEWEB)

    McConnell, R.; Kurtz, S.; Bottenberg, W. R.; Hammond, R.; Jochums, S. W.; McDanal, A. J.; Roubideaux, D.; Whitaker, C.; Wohlgemuth, J.

    2000-05-05

    The paper describes a proposed qualification standard for photovoltaic concentrator modules. The standard's purpose is to provide stress tests and procedures to identify any component weakness in photovoltaic concentrator modules intended for power generation applications. If no weaknesses are identified during qualification, both the manufacturer and the customer can expect a more reliable product. The qualification test program for the standard includes thermal cycles, humidity-freeze cycles, water spray, off-axis beam damage, hail impact, hot-spot endurance, as well as electrical tests for performance, ground continuity, isolation, wet insulation resistance, and bypass diodes. Because concentrator module performance can not be verified using solar simulator and reference cell procedures suitable for flat-plate modules, the standard specifies an outdoor I-V test analysis allowing a performance comparison before and after a test procedure. Two options to this complex analysis are the use of a reference concentrator module for side-by-side outdoor comparison with modules undergoing various tests and a dark I-V performance check.

  8. Qualification of RETRAN for simulator applications

    International Nuclear Information System (INIS)

    Harrison, J.F.

    1988-01-01

    The use of full-scope control room replica simulators increased substantially following the accident at Three Mile Island Unit 2. The technical capability required to represent severe events has been included, in varying degrees, in most simulators purchased since the TMI-2 accident. The ability of the instructor to create a large variety of combinations of malfunctions has also greatly expanded. The nuclear industry has developed a standard which establishes the minimum functional requirements for full-scope nuclear control room simulators used for operator training. This standard, ANSI/ANS-3.5, was first issued in 1981 and was reissued in 1985. A method for performing simulator qualification with best estimate analytical data has been proposed in EPRI NP-4243, Analytic Simulator Qualification Methodology. The idea presented there is to choose a set of transients which drive the simulator into all the system conditions (dynamic states) likely to be encountered during operator training. The key observable parameters for each state are compared to analyses performed with the best estimate analytical model The closeness of the comparison determines the fidelity of the simulator. The approach described in EPRI NP-4243 has been adapted for evaluating RETRAN's capability for use in simulator qualification. RETRAN analyses which compare the RETRAN results to plant or test facility data are evaluated with respect to the simulator test matrix documented in EPRI NP-4243

  9. Environmental qualification program for Wolsong project

    International Nuclear Information System (INIS)

    Duggal, A.; Johal, H.; Yee, F.; Suh, S.K.

    1995-01-01

    The Wolsong EQ Program is a process that begins at the design concept stage and continues throughout the operating life of the station. As all components may not have a 30 year service life without periodic maintenance, the EQ Program becomes an important management tool for the owner of the plant. First, the environmental conditions are predicted for the postulated events. Next, suitably qualified equipment is specified and procured. Then the equipment is installed according to specific instructions. Finally, by means of ongoing maintenance and replacement of parts, the qualification of the equipment is maintained during the operating life of the plant. Proper documentation and traceability is required at all stages of the program. As defined in the Wolsong Project Environmental Qualification Design Guide a comprehensive Environmental Qualification (EQ) Program ensures that safety related equipment located in an area in which a harsh environment could occur, can function when required for the life of the station . This program was implemented at the beginning of the Wolsong project. Using this program, components/equipment are qualified prior to installation and a maintenance program is established to keep equipment 'qualified' throughout the station life

  10. Progress on EPRI electrical equipment qualification research

    International Nuclear Information System (INIS)

    Sliter, G.E.

    1983-01-01

    The objective of EPRI's electrical equipment qualification research program is to provide technical assistance to utilities in meeting nuclear plant safety requirements in a manner consistent with the state of the art. This paper reports progress on several research projects including: radiation effects studies, which compile data on degradation of organic materials in electrical equipment exposed to operational and accident radiation doses; the Equipment Qualification Data Bank, which is a remotely accessible computer system for disseminating qualification information on in-plant equipment, seismic data, and materials data; an aging/seismic correlation program, which is providing test data showing that, in many cases, age degradation has a negligibly small effect on the performance of electrical components under seismic excitation; a review of condition monitoring techniques, which has identified surveillance methods for measuring key performance parameters that have the potential for predicting remaining equipment life; and large-scale hydrogen burn equipment response tests, which are providing data to assess the ability of equipment to remain functional during and after hydrogen burning in postulated degraded core accidents

  11. Software qualification of selected TOUGH2 modules

    International Nuclear Information System (INIS)

    Wu, Y.S.; Ahlers, C.F.; Fraser, P.; Simmons, A.; Pruess, K.

    1996-10-01

    The purpose of this package of reports is to provide all software baseline documents necessary for the software qualification of the single-phase Gas (EOS1G), Effective Continuum Method (ECM), Saturated/Unsaturated Flow (EOS9), and Radionuclide Transport (T2R3D) modules of TOUGH2, a numerical simulation code for multi-dimensional coupled fluid and heat flow of multiphase, multicomponent fluid mixtures in porous and fractured media. This report contains the following sections: (1) Requirements Specification, (2) Design Description, (3) Software Validation Test Plan and Report, (4) Software User Documentation, and (5) Appendices. These sections comprise sequential parts of the Software Life Cycle, and are not intended to stand alone but should be used in conjunction with the TOUGH User's Guide (Pruess, 1987), TOUGH2--A General Purpose Numerical Simulator for Multiphase Fluid and Heat Flow (Pruess, 1991), and the above-referenced TOUGH2 software qualification document. The qualification package is complete with the attached Software Identification Form and executable source code for the single-phase Gas, Effective Continuum method, Saturated/Unsaturated Flow, and Radionuclide Transport modules of TOUGH2

  12. Logic qualification of FPGA-based safety-related I and C systems

    International Nuclear Information System (INIS)

    Hayashi, Toshifumi; Oda, Naotaka; Ito, Toshiaki; Miyazaki, Tadashi; Haren, Yasuhiko

    2009-01-01

    We established a logic qualification method for FPGA-Based I and C safety-related use in Nuclear Power Plants Systems. The FPGA is a programmable logic device and has advantages that the programming is rigorous, simple verifiable, and the technology is stable. However, logic qualification of FPGA had been an issue to be solved when it is used in the safety-related systems, because FPGA is relatively new technology for the nuclear power industry. We employed a software-life cycle approach, because its development process is similar to that of conventional computer-based systems. There are some differences between the FPGA-Based systems and the computer-based systems in the implementation and integration of logic. We examined the FPGA logic implementation and integration process to identify any FPGA-Based system specific hazards. The identified hazards are (1) small logic errors, (2) timing errors, (3) logic synthesis errors, (4) place and route errors, and (5) logic embedding errors. We took the appropriate countermeasures to mitigate these hazards, and employed this logic qualification method in the qualification of the Power Range Monitor System for BWR Power Plants. (author)

  13. The Zhongshan Score

    Science.gov (United States)

    Zhou, Lin; Guo, Jianming; Wang, Hang; Wang, Guomin

    2015-01-01

    Abstract In the zero ischemia era of nephron-sparing surgery (NSS), a new anatomic classification system (ACS) is needed to adjust to these new surgical techniques. We devised a novel and simple ACS, and compared it with the RENAL and PADUA scores to predict the risk of NSS outcomes. We retrospectively evaluated 789 patients who underwent NSS with available imaging between January 2007 and July 2014. Demographic and clinical data were assessed. The Zhongshan (ZS) score consisted of three parameters. RENAL, PADUA, and ZS scores are divided into three groups, that is, high, moderate, and low scores. For operative time (OT), significant differences were seen between any two groups of ZS score and PADUA score (all P RENAL showed no significant difference between moderate and high complexity in OT, WIT, estimated blood loss, and increase in SCr. Compared with patients with a low score of ZS, those with a high or moderate score had 8.1-fold or 3.3-fold higher risk of surgical complications, respectively (all P RENAL score, patients with a high or moderate score had 5.7-fold or 1.9-fold higher risk of surgical complications, respectively (all P RENAL and PADUA scores. ZS score could be used to reflect the surgical complexity and predict the risk of surgical complications in patients undergoing NSS. PMID:25654399

  14. Safety design guides for environmental qualification for CANDU 9

    International Nuclear Information System (INIS)

    Lee, Duk Su; Chang, Woo Hyun; Lee, Nam Young; A. C. D. Wright

    1996-03-01

    This safety design guide describes the safety philosophy and requirements for the environmental qualification of safety related systems and components for CANDU 9. The environmental qualification program identifies the equipments to be qualified and conditions to be used for qualification and provides comprehensive set of documentation to ensure that the qualification is complete and can be maintained for the life of the plant. A summary of the system, components and structures requiring environmental qualification is provided in the table for the guidance of the system design, and this table will be subject to change or confirmation by the environmental qualification program. Also, plant ares subject to harsh environment is provided in the figure. The change status of the regulatory requirements, code and standards should be traced and this safety design guide shall be updated accordingly. 1 tab., 5 figs. (Author) .new

  15. QUALIFICATIONS FRAMEWORKS FOR LIFELONG LEARNING CONQUERING THE WORLD?

    Directory of Open Access Journals (Sweden)

    Arjen Deij

    2014-01-01

    Full Text Available The paper reveals the international prospects of developing and spreading the qualifications frameworks across the globe. It introduces the key terms and concepts related to the given issue, and examines both the benefits and challenges of qualifications frameworks implementation. The author looks into the origins and causes of the worldwide interest in qualifications framework application, and gives the overview of related recent publications and their conclusions to reinforce the provided argumentation.

  16. On relaxing the Mangasarian-Fromovitz constraint qualification

    Czech Academy of Sciences Publication Activity Database

    Kruger, A.Y.; Minchenko, L.; Outrata, Jiří

    2014-01-01

    Roč. 18, č. 1 (2014), s. 171-189 ISSN 1385-1292 R&D Projects: GA ČR GAP402/12/1309 Institutional support: RVO:67985556 Keywords : Nonlinear programming * Regularity conditions * Constraint qualifications * Lagrange multipliers * Mangasarian–Fromovitz constraint qualification * Constant rank constraint qualification Subject RIV: BA - General Mathematics Impact factor: 0.679, year: 2014 http://library.utia.cas.cz/separaty/2014/MTR/outrata-0426110.pdf

  17. [Regarding Authorized Qualifications in Sonography].

    Science.gov (United States)

    Kaneko, Kazuhiko

    2015-04-01

    Today, I will talk about the profession "Ultrasound Technologist." The written examination to gain this license includes clinical questions (35 questions including those using photographs; 70 minutes to answer) and basic questions related to ultrasound for medical use (35 questions including those requiring calculation; 70 minutes to answer). The answer to each question is selected from 5 alternatives. The questions used in the examination are not officially disclosed. The minimum score needed to pass the examination is 60 points for both the test with clinical questions and that with basic questions. My practice to prepare for the basic questions related to ultrasound for medical use involved attempting to answer a collection of questions while understanding physical phenomena by watching animations on the related Internet homepage. I wrote down how to approach the questions (including those requiring calculation), together with comments and answers to each of them. Basic questions about ultrasound for medical use differ little from year to year because there are few questions reflecting highlights or specific topics prevailing in a given year. So, to prepare for basic questions, I think it is important to become familiar with the trends of questions and how to answer them through repeating mock tests many times. Preparing for clinical questions is very difficult. Although many collections of clinical questions are available at bookstores, I have the impression that most of the questions in these collections have already been used in past examinations, and there is now a tendency for more precise clinical questions targeting specific areas to be adopted for the examination. The questions adopted in the past are becoming outdated, while the techniques of ultrasonography are continuing to advance. So, clinical questions are being increasingly adopted that cover recent topics in this field. In any event, knowledge covering extensive areas is needed to prepare for the

  18. Impact of the draft DOE Training and Qualification Standard on an established training and qualification program

    International Nuclear Information System (INIS)

    Taylor, R.G.; Worley, C.A.

    1999-01-01

    One of the provisions of Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 97-2 was that the US Department of Energy (DOE) hor e llipsis Develop and institute ahor e llipsiscourse in criticality and criticality safety hor e llipsis to serve as the foundation for a program of formal qualification of criticality engineers. In response, a draft DOE standard establishing requirements for a formal qualification program for nuclear criticality safety (NCS) engineers has been prepared and is currently in review. The Oak Ridge Y-12 plant implemented a formal training and qualification program for NCS engineers in 1995. The program complies with existing DOE requirements. The program was developed using a performance-based systematic approach to training and is accomplished through structured mentoring where experienced personnel interact with candidates through various learning exercises. Self-study, exercises, and work under instruction are all utilized. The candidate's performance is evaluated by mentors and oral boards. Competency gained through experience at other sites can also be credited. Technical portions of the program are primarily contained in an initial Engineer-in-Training segment and in subsequent task-specific qualifications. The Engineer-in-Training segment exposes the candidate to fundamental NCS concepts through example problems; ensures the initial compliance training requirements are met; and includes readings from applicable procedures, technical documents, and standards. Upon completion of this initial training, candidates proceed to task qualifications. Tasks are defined NCS activities such as operational reviews, criticality safety evaluations, criticality safety computations, criticality accident alarm system (CAAS) evaluations, support for emergency management, etc. Qualification on a task basis serves to break up training into manageable pieces and expedites qualification of candidates to perform specific production activities. The

  19. Chapter No.8. Personnel qualification and training

    International Nuclear Information System (INIS)

    2002-01-01

    The overall training system and the development projects of training the staff of all categories from NPP V-1, NPP V-2 Bohunice, SE-VYZ and NPP Mochovce were the subject of UJD's attention. During 2001 following inspections were carried out on nuclear personnel training: - PP's Bohunice: an inspection focused on compliance with requirements for staff qualifications and compliance with the prescribed training of Bohunice plant staff; - Mochovce NPP: an inspection focused on compliance with the requirements for staff qualifications and compliance with the prescribed training of NPP Mochovce staff; - SE-VYZ: an inspection focused on compliance with the requirements for staff qualifications and compliance with the prescribed training of SE-VYZ staff. Training the staff of the NPP's Bohunice: - The fundamental and periodical theoretical training as sure as the fundamental and periodical simulator training is carried out by the VUJE Training centre in Trnava. - The fundamental practical training in the workplace and training for the change work- rank is carried at Bohunice plant. Training of the staff of the NPP Mochovce: - The fundamental and periodical theoretical training is carried out by the VUJE Training centre in Trnava. The fundamental practical training in the workplace and training for the change work- rank as well as the fundamental and periodical simulator training is carried at Mochovce plant. Based on a successful passing of examination before the examining committee, UJD issues a certificate on special professional skills of selected staff members of nuclear installations for specific activity for the given type of nuclear installation and for the following positions: 1. Scientific shift manager for start up with the right of manipulation; 2. Shift supervisor; 3. Unit supervisor; 4. Primary circuit operator; 5. Secondary circuit operator; 6. Reactor physicist; 7. Scientific shift manager for start up without the right of manipulation. Examinations of

  20. Qualification of ISI for Bulgarian NPP: UK support

    International Nuclear Information System (INIS)

    Booler, R.

    2000-01-01

    UK Regulator (NII) Phare project provides an assistance to the Bulgarian Regulator in setting up the technical infrastructure for inspection qualification consistent with IAEA Guidelines and western European practice. The Strategy Document defines the methodology for inspection qualification and general roles and responsibilities of the involved organizations. The Qualification Inputs Document describes the information required for the Technical Specifications (component details, inspection aims and limitations). It applies the idea of qualification level - level 1(lowest) to level 3 (highest). The Qualification Procedure Document provides a guidance to the utility ('Kozloduy' NPP) on the preparation of Qualification Procedures (QP). The appendix provides a specific guidance on the performance of the all aspects of qualification at different levels and recommendations for technical justification. QB Method Working Document provides guidance for the Qualification Body. Facilities and Resources Document defines the facilities and resources required for the Qualification Body to perform the tasks described in the Method Working Document. High level QA Document defines the principles of quality control. Other issues and progress report are also presented

  1. Seismic qualification testing at the National Engineering Laboratory

    International Nuclear Information System (INIS)

    Fairbairn, J.

    1984-01-01

    Servohydraulic shaker tables have been developed for the simulation of vibration environments including earthquakes. The use of these facilities for seismic qualification of nuclear equipment is described. (author)

  2. 77 FR 10607 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-02-22

    ...-2011-0367] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce. The...). [[Page 10608

  3. Seismic qualification of existing nuclear installations in India - a proposal

    International Nuclear Information System (INIS)

    Basu, P.C.

    2001-01-01

    In India, the work toward seismic qualification of existing nuclear facilities has been started. Preliminary work is being undertaken with respect to identifying the facilities which would be taken up for seismic qualification, approach and methodology for re-evaluation for seismic safety, acceptance criteria, etc. Work has also been started for framing up the criteria and methodology of the seismic qualification of these facilities. Present paper contains the proposal in this respect. This proposal is on similar lines of the present practice of seismic qualification of NPP, as summarized in the Appendix, but has been modified to suit the special requirements of Indian nuclear installations. (author)

  4. Actively cooled plasma facing components qualification, commissioning and health monitoring

    International Nuclear Information System (INIS)

    Escourbiac, F.; Durocher, A.; Grosman, A.; Courtois, X.; Farjon, J.-L.; Schlosser, J.; Merola, M.; Tivey, R.

    2006-01-01

    In modern steady state magnetic fusion devices, actively cooled plasma facing components (PFC) have to handle heat fluxes in the range of 10-20 MW/m 2 . This generates a number of engineering constraints: the armour materials must be refractory and compatible with plasma wall interaction requirements (low sputtering and/or low atomic number); the heat sink must offer high thermal conductivity, high mechanical resistance and sufficient ductility; the component cooling system -which is generally based on the circulation of pressurized water in the PFC's heat sink - must offer high thermal heat transfer efficiency. Furthermore, the assembling of the refractory armour material onto the metallic heat sink causes generic difficulties strongly depending on thermo-mechanical properties of materials and design requirements. Life time of the PFC during plasma operation are linked to their manufacturing quality, in particular they are reduced by the possible presence of flaw assembling. The fabrication of PFC in an industrial frame including their qualification and their commissioning - which consists in checking the manufacturing quality during and at the end of manufacture - is a real challenge. From experience gained at Tore Supra on carbon fibre composite flat tiles technology components, it was assessed that a set of qualifications activities must be operated during R(and)D and manufacturing phases. Dedicated Non Destructive Technique (NDT) based on advanced active infrared thermography was developed for this purpose, afterwards, correlations between NDT, high heat flux testing and thermomechanical modelling were performed to analyse damage detection and propagation, and define an acceptance criteria valuable for industrial application. Health monitoring using lock-in technique was also recently operated in-situ of the Tore Supra tokamak for detection of possible defect propagation during operations, presence of acoustic precursor for critical heat flux detection induced

  5. Questions of qualification exam for non-destructive testing and materials science - the first level

    International Nuclear Information System (INIS)

    Shaaban, H.I.; Addarwish, J.M.A.

    2013-01-01

    The book contains seven chapters: Questions of qualification for magnetic particles testing method - Questions of qualification for liquids penetrant testing method - Questions of qualification for the visual inspection testing method - Questions of qualification for the ultrasonic testing method - Questions of qualification for the eddy current testing method - Questions of rehabilitation for industrial radiographic testing method - Qualification questions about materials science and manufacturing defects of castings and welding and comparison between non-destructive testing methods.

  6. Implementation plans for the Korean certified tumor registrar qualification system.

    Science.gov (United States)

    Boo, Yoo-Kyung; Lim, Hyun-Sook; Won, Young-Joo

    2014-01-01

    Cancer registration data is used to understand the nation's cancer burden, and to provide significant baseline data for cancer control efforts, as well as, research on cancer incidence, mortality, survival, and prevalence. A system that approves, assesses, and manages the qualification of specialists, responsible for performing cancer registration, has not been developed in Korea. This study presents ways to implement a certification system designed for the qualification of tumor registrars in Korea. Requirements for implementing a certified tumor registrar qualification system were determined by reviewing the system for establishing qualifications in Korea and the American qualification system via the National Cancer Registrars Association (NCRA). Moreover, a survey was conducted on Korean medical records administrators, who had taken the U.S. Certified Tumor Registrar (CTR) examination, in order to review their opinions regarding these requirements. This study verified the feasibility of a qualification examination based on the opinions of CTR specialists by determining the following: items, and the associated ratings, of the qualifications necessary to register individuals as certified tumor registrars in a private qualification system; status of human resources required for the examination or training processes; plans regarding the organization needed for management, and operation of qualifications, examination standards, subject areas, examination methods, examination qualifications, or education and training programs. The implementation of a certified tumor registrar qualification system will lead to enhanced job competency for specialists and a qualitative improvement of cancer registration data. It will also reliably foster human resources that will lay the groundwork needed to establish scientific and reasonable national cancer management policies.

  7. Test report: Electron-proton spectrometer qualification test unit, qualification test

    Science.gov (United States)

    Vincent, D. L.

    1972-01-01

    Qualification tests of the electron-proton spectrometer test unit are presented. The tests conducted were: (1) functional, (2) thermal/vacuum, (3) electromagnetic interference, (4) acoustic, (5) shock, (6) vibration, and (7) humidity. Results of each type of test are presented in the form of data sheets.

  8. Chapter 9. Personnel qualification and training

    International Nuclear Information System (INIS)

    2001-01-01

    The overall training system and the development of projects for training of all categories of NPP V-1, NPP V-2 Bohunice, SE-VYZ and NPP Mochovce staff were the subject of Nuclear Regulatory Authority of the Slovak Republic (UJD) attention. During 2000, the following inspections were carried out on nuclear personnel training: (a) NPP Bohunice: an inspection focused on compliance with requirements for staff qualifications and compliance with the prescribed training of Bohunice plant staff ; (b) NPP Mochovce: an inspection focused on compliance with the requirements for staff qualifications and compliance with the prescribed training of NPP Mochovce staff; an inspection focused on verifying the simulator aided training; an inspection focused on checking the preparedness of NPP Mochovce operation and technical personnel for NPP Mochovce Unit 2 operation; (c) Technology for treatment and conditioning of radioactive waste Bohunice (BSC): an inspection focused on compliance with the requirements for staff qualifications and compliance with the prescribed training of SE-VYZ staff; VUJE Trnava: verification of technical equipment and professional skills of VUJE Trnava staff and tasks arising out of the 'Authorisation on nuclear installation staff training'. Examinations of selected personnel were scheduled according to the plan of examining committee meetings. For each examined person written tests are generated by the computer from the database of test questions at the Training Centre of VUJE Trnava for individual positions - categories of selected staff of NPP V-1 and NPP V-2 Bohunice and NPP Mochovce so that the examination questions both in written and oral part equally cover individual facilities and regimes of operation of NPP. The database is continuously updated, thereby containing new questions resulting from the recent changes carried out at NPPs. A part of the examination in case of promotion to a higher position is the practical part, which is conducted under

  9. On ISI effectiveness through inspection qualification

    International Nuclear Information System (INIS)

    Harutyunov, R.

    2000-01-01

    There are two units of WWER type in the ANPP. The results of the implementation of the IAEA qualification guidelines for the ANPP Primary Circuit for WWER are presented. The control methods according to the ISI Program are foreseen in the design and implemented during the preparation for the unit 2 restart. The result of control is plugging of more tubes than during the last operation period. During the next years in the presence of the blowdown water activity, the search on defective tubes was performed by Lumhydraulic methods and the tubes were plugged by welding plugs. In 1999 was performed the visual control on the Steam Generator 6 by WNIAES experts and by the ANPP experts from the Metal Laboratory. The result is confirmation of the irreversible process on erosive-corrosion destruction of feed waters distribution header; definition of the defects coordinates defined; detection of sediments within the SG vessel surfaces and in the head exchanged surface tubes. The purpose of the ISI effectiveness improvement is to discover the defects in the base metal and in the welds before developing into a problem at operating level or a safety problem. For the solution on the specific problems at the ANPP the project for technological co-operation with IAEA has been developed. It is necessary to organize training, certification, assessment methodology. The expected results after the project implementation are to establish the base for the equipment qualification body and staff certification; to upgrade the ANPP staff qualification; to prepare a group of experts, supported by ANRA, which to be also involved in the development of NDM national regulators

  10. The State of the Otolaryngology Match: A Review of Applicant Trends, "Impossible" Qualifications, and Implications.

    Science.gov (United States)

    Bowe, Sarah N; Schmalbach, Cecelia E; Laury, Adrienne M

    2017-06-01

    Objective This State of the Art Review aims (1) to define recent qualifications of otolaryngology resident applicants by focusing on United States Medical Licensing Examination (USMLE) scores, Alpha Omega Alpha (AOA) status, and research/publications and (2) to summarize the current literature regarding the relationship between these measures and performance in residency. Data Sources Electronic Residency Application Service, National Residency Matching Program, PubMed, Ovid, and GoogleScholar. Review Methods Electronic Residency Application Service and National Residency Matching Program data were analyzed to evaluate trends in applicant numbers and qualifications. Additionally, a literature search was performed with the aforementioned databases to identify relevant articles published in the past 5 years that examined USMLE Step 1 scores, AOA status, and research/publications. Conclusions Compared with other highly competitive fields over the past 3 years, the only specialty with decreasing applicant numbers is otolaryngology, with the rest remaining relatively stable or slightly increased. Additionally, USMLE Step 1 scores, AOA status, and research/publications do not reliably correlate with performance in residency. Implications for Practice The consistent decline in applications for otolaryngology residency is concerning and reflects a need for change in the current stereotype of the "ideal" otolaryngology applicant. This includes consideration of additional selection measures focusing on noncognitive and holistic qualities. Furthermore, otolaryngology faculty should counsel medical students that applying in otolaryngology is not "impossible" but rather a feasible and worthwhile endeavor.

  11. Environmental Qualification Program for NPP Krsko

    International Nuclear Information System (INIS)

    Cerjak, J.; Klenovsek, P.; Pavsek, J.; Spalj, S.; Colovic, G.

    1998-01-01

    The functionality the equipment important to safety is deteriorated during its service due to ageing and harsh environment conditions. Since the environment is a potential for common cause failures, the purpose of Environmental Qualification (EQ) is to demonstrate the capability of safety-related equipment to perform its safety function in aged conditions and under extreme conditions after design bases event (DBE). EQ is one of the steps in licensing process according to US regulatory documents and standards (10CFR50.49, RG 1.89, NUREG-0588, IEEE-323). This paper presents the efforts in establishing the EQ program in the Krsko nuclear power plant. (author)

  12. Qualification and training of quality assurance personnel

    International Nuclear Information System (INIS)

    Ribeiro da Costa, J.

    1980-01-01

    Introduction. Qualification and certification: definitions; approach of the problem. A first attempt for its solutions. The 'sample' course; results and conclusions. Planning a comprehensive program: results. Analysis and preliminary conclusions. Absorption of the know-how and planning further programs for training. Development and updating the general training course with the introduction of German experience - summary of results. General planning of a training course for quality and reliability are as for the next courses. Evaluation, grading and final results awarded to participants, as followed in QA-Training courses - certification. Future trends (tentative) - conclusions. (orig./RW)

  13. Qualification test and analysis report: solar collectors

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-01

    Test results show that the Owens-Illinois Sunpak/sup TM/ Model SEC 601 air-cooled collector meets the national standards and codes as defined in the Subsystem Performance Specification and Verification Plan of NASA/MSFC Contract NAS8-32259, dated October 28, 1976. The architectural and engineering firm of Smith, Hinchman and Grylls, Detroit, Michigan, acted in the capacity of the independent certification agency. The program calls for the development, fabrication, qualification and delivery of an air-liquid solar collector for solar heating, combined heating and cooling, and/or hot water systems.

  14. Inspection Qualification Centre in NPP 'Kozloduy'

    International Nuclear Information System (INIS)

    Mikhovski, M.

    2000-01-01

    In May 1999 according to the working plan of the IAEA project RER 4/020 and the decision of the NPP the Inspection Qualification Centre (IQC) has been established in order to provide examination services in the NPP. During year 1999 IVC (AEA Technology) in the framework of the DTI project provides consulting and technical assistance to the NPP, IQC, Bulgarian Academy of Sciences and Regulatory Authorities in setting up the IQC infrastructure. Now IQC work as an independent inspection body B type. The IQC activities for the period 1999-2000 are presented and further tasks are outlined

  15. Underwater Ranging

    OpenAIRE

    S. P. Gaba

    1984-01-01

    The paper deals with underwater laser ranging system, its principle of operation and maximum depth capability. The sources of external noise and methods to improve signal-to-noise ratio are also discussed.

  16. Sodium-glucose cotransporter 2 inhibitor use: A pharmaco-ergonomic qualification tool

    Directory of Open Access Journals (Sweden)

    Sanjay Kalra

    2017-01-01

    Full Text Available Pharmaco-ergonomics implies tailoring the drug therapy to an individual patient's requirement(s. The development of sodium-glucose cotransporter 2 inhibitor (SGLT2-i agents has impelled multiple clinical considerations, in the management of type-2 diabetes. This paper attempts to summarize the pharmaco-ergonomic considerations for these agents, in the form of an SGLT2-i qualification tool, based on a clinical score. This tool may serve as a simple and inexpensive practical guide, to optimize the risk-benefit considerations for SGLT2-i agents.

  17. 49 CFR 391.11 - General qualifications of drivers.

    Science.gov (United States)

    2010-10-01

    ... understand highway traffic signs and signals in the English language, to respond to official inquiries, and... QUALIFICATIONS OF DRIVERS AND LONGER COMBINATION VEHICLE (LCV) DRIVER INSTRUCTORS Qualification and... motor vehicle unless he/she is qualified to drive a commercial motor vehicle. Except as provided in...

  18. Qualification Paths of Adult Educators in Sweden and Denmark

    Science.gov (United States)

    Andersson, Per; Kopsen, Susanne; Larson, Anne; Milana, Marcella

    2013-01-01

    The qualification of adult educators is a central aspect of the quality of adult education. However, within current policy discourses and adult education research on the professional development of prospective adult educators, little attention is paid to teacher qualification when compared to other fields of education and training. In this study,…

  19. 42 CFR 21.47 - Examination; anticipation of meeting qualifications.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Examination; anticipation of meeting qualifications. 21.47 Section 21.47 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES PERSONNEL COMMISSIONED OFFICERS Appointment § 21.47 Examination; anticipation of meeting qualifications. A...

  20. 14 CFR 135.247 - Pilot qualifications: Recent experience.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Pilot qualifications: Recent experience... Flight Crewmember Requirements § 135.247 Pilot qualifications: Recent experience. (a) No certificate holder may use any person, nor may any person serve, as pilot in command of an aircraft carrying...

  1. 14 CFR 121.437 - Pilot qualification: Certificates required.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Pilot qualification: Certificates required... Pilot qualification: Certificates required. (a) No pilot may act as pilot in command of an aircraft (or... pilots) unless he holds an airline transport pilot certificate and an appropriate type rating for that...

  2. 14 CFR 121.439 - Pilot qualification: Recent experience.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Pilot qualification: Recent experience. 121... Pilot qualification: Recent experience. (a) No certificate holder may use any person nor may any person serve as a required pilot flight crewmember, unless within the preceding 90 days, that person has made...

  3. 14 CFR 125.285 - Pilot qualifications: Recent experience.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Pilot qualifications: Recent experience... Requirements § 125.285 Pilot qualifications: Recent experience. (a) No certificate holder may use any person, nor may any person serve, as a required pilot flight crewmember unless within the preceding 90...

  4. 12 CFR 563c.3 - Qualification of public accountant.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Qualification of public accountant. 563c.3... REQUIREMENTS Form and Content of Financial Statements § 563c.3 Qualification of public accountant. (See also 17 CFR 210.2-01.) The term “qualified public accountant” means a certified public accountant or licensed...

  5. 30 CFR 75.155 - Qualified hoisting engineer; qualifications.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Qualified hoisting engineer; qualifications. 75... Persons § 75.155 Qualified hoisting engineer; qualifications. (a)(1) A person is a qualified hoisting engineer within the provisions of subpart O of this part, for the purpose of operating a steam-driven hoist...

  6. Qualifications of Subject Teachers in Special Education Schools

    Science.gov (United States)

    Rasmussen, Meryem Uçar; Kis, Arzu

    2018-01-01

    Teacher qualifications are essential to be able to teach children with special needs efficiently. Therefore the aim of this study is to determine the qualifications of subject teachers in special education schools in Turkey. In the study 20 subject teachers within the field of music, art and sports who worked in special education schools in Turkey…

  7. AP-102/104 Retrieval control system qualification test procedure

    International Nuclear Information System (INIS)

    RIECK, C.A.

    1999-01-01

    This Qualification Test Procedure documents the results of the qualification testing that was performed on the Project W-211, ''Initial Tank Retrieval Systems,'' retrieval control system (RCS) for tanks 241-AP-102 and 241-AP-104. The results confirm that the RCS has been programmed correctly and that the two related hardware enclosures have been assembled in accordance with the design documents

  8. Selection, qualification and training of personnel for nuclear power plants

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    This standard provides criteria for the selection, qualification and training of personnel for stationary nuclear power plants. Qualifications, responsibilities, and training of personnel in operating and support organizations appropriate for the safe and efficient operation of nuclear power plants are addressed

  9. 48 CFR 1252.237-70 - Qualifications of contractor employees.

    Science.gov (United States)

    2010-10-01

    ... contractor employees. 1252.237-70 Section 1252.237-70 Federal Acquisition Regulations System DEPARTMENT OF....237-70 Qualifications of contractor employees. As prescribed in (TAR) 48 CFR 1237.110(a), insert the following clause: Qualifications of Contractor Employees (APR 2005) a. Definitions. As used in this clause...

  10. 48 CFR 1437.7001 - Contractor qualification requirements.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Contractor qualification requirements. 1437.7001 Section 1437.7001 Federal Acquisition Regulations System DEPARTMENT OF THE INTERIOR... Contractor qualification requirements. (a) Prior to award of a contract for real property appraisal services...

  11. 49 CFR 214.343 - Training and qualification, general.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Training and qualification, general. 214.343... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY Roadway Worker Protection § 214.343 Training and qualification, general. (a) No employer shall assign an employee to perform the duties of a...

  12. Qualifications Frameworks and Their Conflicting Social Imaginaries of Globalisation

    Science.gov (United States)

    Louise Sarauw, Laura

    2012-01-01

    Critics often see the European Bologna Process as a univocal standardisation of higher education. By exploring how different qualifications frameworks project different social imaginaries of globalisation, this article takes a different stance. The overarching qualifications framework of the Bologna Process rests on a socially constituted and…

  13. 32 CFR 935.139 - Motor vehicle operator qualifications.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Motor vehicle operator qualifications. 935.139... AND INSULAR REGULATIONS WAKE ISLAND CODE Motor Vehicle Code § 935.139 Motor vehicle operator qualifications. (a) No person may operate a privately owned motor vehicle on Wake Island unless he has an island...

  14. 29 CFR 1926.1076 - Qualifications of dive team.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Qualifications of dive team. 1926.1076 Section 1926.1076 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION... § 1926.1076 Qualifications of dive team. Note: The requirements applicable to construction work under...

  15. 29 CFR 1910.410 - Qualifications of dive team.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 5 2010-07-01 2010-07-01 false Qualifications of dive team. 1910.410 Section 1910.410... Requirements § 1910.410 Qualifications of dive team. (a) General. (1) Each dive team member shall have the experience or training necessary to perform assigned tasks in a safe and healthful manner. (2) Each dive team...

  16. Inspection qualification and implementation of ENIQ in Sweden

    International Nuclear Information System (INIS)

    Zettervall, Tommy

    2013-01-01

    Many countries are currently considering their approaches to inspection qualification and risk-informed in-service inspection (RI-ISI) and are carefully assessing experience data. In Europe most of the utilities operating nuclear power plants have joined together to form the European Network for Inspection Qualification ENIQ. In practice, qualification can be performed with varying degrees of complexity and cost, varying from capability statement based on existing evidence, through to an extensive qualification consisting of a detailed Technical Justification (TJ) together with open and blind trials on full-scale test blocks. An Inspection Qualification is an investigation and demonstration, which confirm that an inspection system has the ability to solve its specific tasks. The qualification is a Quality Assurance of an inspection system based on documents and practical trials. A reliable inspection system, based on a reliable qualification and correct prerequisites, will reduce total costs for Licensees and increase the credibility of the inspection result. To get such inspection system, which could be valid for many years, it's of necessity to fulfil all included parts in the process. It begins with the Technical Specification from Licensee, where input data and requirements about the actual component are specified. To get an inspection system that could live over time, the Technical Justification is of importance. Finally the test blocks and used simulation techniques play an important part of the final result, and these test blocks together with TJ form the basis for qualification body's decision. (author)

  17. 27 CFR 19.823 - Changes after original qualification.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Changes after original... Vaporizing Process Qualification Documents § 19.823 Changes after original qualification. When there is a change in the information recorded in the original approved application, the proprietor shall make a...

  18. 12 CFR 231.3 - Qualification as a financial institution.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Qualification as a financial institution. 231.3... RESERVE SYSTEM NETTING ELIGIBILITY FOR FINANCIAL INSTITUTION (REGULATION EE) § 231.3 Qualification as a financial institution. (a) A person qualifies as a financial institution for purposes of sections 401-407 of...

  19. Qualification Users' Perceptions and Experiences of Assessment Reliability

    Science.gov (United States)

    Chamberlain, Suzanne

    2013-01-01

    This paper presents the findings of a study designed to explore qualification users' perceptions and experiences of reliability in the context of national assessment outcomes in England. The study consisted of 17 focus groups conducted across six sectors of qualification users: students, teachers, trainee teachers, job-seekers, employers and…

  20. 14 CFR 121.909 - Approval of Advanced Qualification Program.

    Science.gov (United States)

    2010-01-01

    ... criteria. Each AQP must have separate curriculums for indoctrination, qualification, and continuing... the training and evaluation of CRM and technical skills and knowledge. An application for approval of... must meet all the requirements of this subpart. (2) Each indoctrination, qualification, and continuing...

  1. How to score questionnaires

    NARCIS (Netherlands)

    Hofstee, W.K.B.; Ten Berge, J.M.F.; Hendriks, A.A.J.

    The standard practice in scoring questionnaires consists of adding item scores and standardizing these sums. We present a set of alternative procedures, consisting of (a) correcting for the acquiescence variance that disturbs the structure of the questionnaire; (b) establishing item weights through

  2. SCORE - A DESCRIPTION.

    Science.gov (United States)

    SLACK, CHARLES W.

    REINFORCEMENT AND ROLE-REVERSAL TECHNIQUES ARE USED IN THE SCORE PROJECT, A LOW-COST PROGRAM OF DELINQUENCY PREVENTION FOR HARD-CORE TEENAGE STREET CORNER BOYS. COMMITTED TO THE BELIEF THAT THE BOYS HAVE THE POTENTIAL FOR ETHICAL BEHAVIOR, THE SCORE WORKER FOLLOWS B.F. SKINNER'S THEORY OF OPERANT CONDITIONING AND REINFORCES THE DELINQUENT'S GOOD…

  3. Developing competence based qualification system in the nuclear energy sector

    International Nuclear Information System (INIS)

    Ceclan, Mihail

    2016-01-01

    The Institute for Energy and Transport of the Joint Research Centre, European Commission, developed a strategy and road map for ECVET implementation. The JRC road map for European Credit System for Vocational Education and Training (ECVET) implementation has reached the stage of Competence-Based Qualification System development. The Competence-Based Qualification System can help bridge the gap between Human Resources demand and supply in the nuclear market by structuring qualifications in small independent parts. This very specific ECVET feature of a qualification, facilitates the process of competences accumulation and the lifelong learning, mobility and flexible learning pathways. New developments are presented about the Competence-Based Qualification System development for the nuclear energy sector.

  4. Developing competence based qualification system in the nuclear energy sector

    Energy Technology Data Exchange (ETDEWEB)

    Ceclan, Mihail [European Commission, Petten (Netherlands). Inst. for Energy and Transport

    2016-04-15

    The Institute for Energy and Transport of the Joint Research Centre, European Commission, developed a strategy and road map for ECVET implementation. The JRC road map for European Credit System for Vocational Education and Training (ECVET) implementation has reached the stage of Competence-Based Qualification System development. The Competence-Based Qualification System can help bridge the gap between Human Resources demand and supply in the nuclear market by structuring qualifications in small independent parts. This very specific ECVET feature of a qualification, facilitates the process of competences accumulation and the lifelong learning, mobility and flexible learning pathways. New developments are presented about the Competence-Based Qualification System development for the nuclear energy sector.

  5. Skill qualifications in pediatric minimally invasive surgery.

    Science.gov (United States)

    Iwanaka, Tadashi; Morikawa, Yasuhide; Yamataka, Atsuyuki; Nio, Masaki; Segawa, Osamu; Kawashima, Hiroshi; Sato, Masahito; Terakura, Hirotsugu; Take, Hiroshi; Hirose, Ryuichiro; Yagi, Makoto

    2011-07-01

    In 2006, The Japanese Society of Pediatric Endoscopic Surgeons devised a plan to develop a pediatric endoscopic surgical skill qualification (ESSQ) system. This system is controlled by The Japan Society for Endoscopic Surgery. The standard requirement for skills qualification is the ability of each applicant to complete common types of laparoscopic surgery. The main goal of the system is to decrease complications of laparoscopic surgery by evaluating the surgical skills of each applicant and subsequently certify surgeons with adequate skills to perform laparoscopic operations safely. A committee of pediatric ESSQ created a checklist to assess the applicant's laparoscopic surgical skills. Skills are assessed in a double-blinded fashion by evaluating an unedited video recording of a fundoplication for pediatric gastroesophageal reflux disease. The initial pediatric ESSQ system was started in 2008. In 2008 and 2009, respectively, 9 out of 17 (53%) and 6 out of 12 (50%) applicants were certified as expert pediatric laparoscopic surgeons. Our ultimate goal is to provide safe and appropriate pediatric minimally invasive procedures and to avoid severe complications. To prove the predictive validity of this system, a survey of the outcomes of operations performed by certified pediatric surgeons is required.

  6. MTR fuel plate qualification in OSIRIS reactor

    International Nuclear Information System (INIS)

    Sacristan, P.; Boulcourt, P.; Naury, S.; Marchard, L.; Carcreff, H.; Noirot, J.

    2005-01-01

    Qualification of new MTR fuel needs the irradiation in research reactors under representative neutronic, heat flux and thermohydraulic conditions. The experiments are performed in France in the OSIRIS reactor by irradiating MTR full size fuel plates in the IRIS device located in the reactor core. The fuel plates are easily removed from the device during the shutdown of the reactor for performing thickness measurements along the plates by means of a swelling measurement device. Beside the calculation capabilities, the experimental platform includes: the ISIS neutron mock-up for the measurement of neutron flux distribution along the plates; the γ spectrometry for the purpose of measuring the activities of the radionuclides representative of the power and the burnup and to compare with the neutronic calculation. Owing to the experience feedback, a good agreement is observed between calculation and measurement; destructive post irradiation examinations in the LECA facility (Cadarache). New irradiations with the IRIS device and at higher heat flux are under preparation for qualification of MTR fuels. (author)

  7. A system for personnel qualification of non-destructive testing procedures from testing and and qualification system in Sweden

    International Nuclear Information System (INIS)

    Kuna, M.; Kubis, S.; Plasek, J.

    1999-01-01

    The method for qualification of non-destructive testing personnel carrying out inspections by means of ultrasonic and eddy-current tests to inspect cladding in BWR reactor pressure vessel and core shroud lid. Development of procedures tests with real artificial cracks, blind tests. Evaluation of results by the Swedish Qualification Commission. Performance of the tests at Oskarshamn-1

  8. Qualification and Life Testing of Li-Ion Ves16 Batteries

    Directory of Open Access Journals (Sweden)

    Remy Stéphane

    2017-01-01

    Up to the present time, Saft batteries have been mainly utilizing for space applications high capacity cells, like the 45 Ah VES180 and the 35 Ah VES140 cells, targeting predominantly space missions in Geostationary Earth Orbit (GEO. However following the qualification and commercialization of the Saft 4.5 Ah VES16 cell in October 2011 [1] & [2], Saft has been developing and qualifying in the frame of this ESA GSTP 5.2 contract, VES 16 batteries for space missions, targeting both GEO and Low Earth Orbit (LEO satellite missions. The electrochemistry of the VES16 cells used for the battery modules under the ESA qualification program is not novel. For VES16 cells, the Saft knowhow from large capacity space cells used for space applications, since SMART 1 mission in 2003, has been tailored for a cell with smaller capacity in order to facilitate the modular philosophy that has been deployed in this battery range.

  9. The Bandim tuberculosis score

    DEFF Research Database (Denmark)

    Rudolf, Frauke; Joaquim, Luis Carlos; Vieira, Cesaltina

    2013-01-01

    Background: This study was carried out in Guinea-Bissau ’ s capital Bissau among inpatients and outpatients attending for tuberculosis (TB) treatment within the study area of the Bandim Health Project, a Health and Demographic Surveillance Site. Our aim was to assess the variability between 2...... physicians in performing the Bandim tuberculosis score (TBscore), a clinical severity score for pulmonary TB (PTB), and to compare it to the Karnofsky performance score (KPS). Method : From December 2008 to July 2009 we assessed the TBscore and the KPS of 100 PTB patients at inclusion in the TB cohort and...

  10. Application of operating experience in environmental qualification program

    International Nuclear Information System (INIS)

    Lee, S.Y.; Wise, R.

    2000-01-01

    Environmental qualification (EQ) of equipment related to nuclear safety has been carried out in the nuclear community since the 70's. It started with electrical equipment and then expanded to include mechanical equipment. During this evolutionary process, the methods used for EQ have gone through a long period of refinement and clarification. Prior to 1971, qualification for equipment in licensed nuclear power plants was based on the use of electrical components of commonly accepted high industrial quality without the benefit of specific environmental qualification standards. Between 1971 and 1974, most plants used the criteria of IEEE Standard 323-1971 as the basis for demonstrating qualification. Also during this period related 'daughter' standards, mainly by IEEE, became available which addressed qualification for specific equipment items. After July 1974, plants were required to meet the more comprehensive guidelines specified in IEEE Standard 323-1974 and the related 'daughter' standards. IEEE Standard 323-1974 later evolved into IEEE Standard 323-1983. For nuclear power plants built in Ontario during the 70's, i.e. Pickering B and Bruce B, has included the environmental qualification requirements in their respective nuclear safety design guides. It is now recognized that they are not up to the current EQ standards. Darlington, constructed during the 80's, implemented the environmental qualification program in its project. An Environmental Qualification (EQ) Program is now under way in Ontario Power Generation (OPG) to formally implement the Environmental Qualification for Bruce B, Pickering B, and Pickering A and to preserve the Qualification for Darlington G.S. This paper makes a thorough a review of the standard methods used in the past by utilities for environmental qualification. These methods include type testing, analysis, and operating experience. Both type testing and analysis have been clearly defined in standards listed in References [2] to [6] and

  11. Volleyball Scoring Systems.

    Science.gov (United States)

    Calhoun, William; Dargahi-Noubary, G. R.; Shi, Yixun

    2002-01-01

    The widespread interest in sports in our culture provides an excellent opportunity to catch students' attention in mathematics and statistics classes. One mathematically interesting aspect of volleyball, which can be used to motivate students, is the scoring system. (MM)

  12. Chapter 9. Personnel qualification and training

    International Nuclear Information System (INIS)

    2000-01-01

    In 1999 the Nuclear Regulatory Authority of the Slovak Republic (UJD) focused on the overall training system and on developing programmes for individual categories for NPP V-1 Bohunice, NPP V-2 Bohunice, NPP Mochovce and SE-VYZ. The fundamental theoretical and periodical training for both Bohunice and Mochovce NPPs personnel, simulator training for NPP Bohunice, and periodical simulator training for Bohunice personnel is carried out by the VUJE Training center in Trnava, whereas the simulator training and periodical training for NPP Mochovce is carried at Mochovce plant. Based on a successful passing of examination before the examining committee, UJD issues, a certificate on special professional skills of selected staff of nuclear installations for specific activity for the given type of nuclear installation and for the following positions: (a)Shift manager for scientific start up with the right of manipulation; (b) Shift supervisor; (c) Unit supervisor; (d) Primary circuit operator; (e) Secondary circuit operator; (f) Reactor physicist; (g) Shift manager for scientific start up without the right of manipulation. Examination of selected personnel is described. Last year the examining committee held twelve session for oral theoretical examination. The number of licenses issued in 1999 and the total number of valid licenses is given.Conclusions from inspections carried out by UJD and inspections and tests carried out by the NPP operators in 1999, as well as results from operation and start up of nuclear units confirm that the standard of professional skills of the staff at nuclear installations a high standard of operational safety is being achieved on a permanent basis. Increasing the qualification of UJD staff was done in a form of training and courses scheduled in the plan of training for the staff for 1999. These training, composed of specialized qualification study, functional study, as well as study aimed at maintaining qualification. Training courses organized

  13. Equality of employment opportunities for nurses at the point of qualification: an exploratory study.

    Science.gov (United States)

    Harris, Ruth; Ooms, Ann; Grant, Robert; Marshall-Lucette, Sylvie; Chu, Christine Sek Fun; Sayer, Jane; Burke, Linda

    2013-03-01

    Securing employment after qualification is of utmost importance to newly qualified nurses to consolidate knowledge and skills. The factors that influence success in gaining this first post are not known. The study aimed to describe the first post gained after qualification in terms of setting, nature of employment contract and geographical distribution and explore the relationship between a range of factors (including ethnicity) and employment at the point of qualification. An exploratory study using structured questionnaires and secondary analysis of data routinely collected by the universities about students and their progress during their course. The study was conducted in eight universities within a large, multicultural city in the UK as part of the 'Readiness for Work' research programme. Eight hundred and four newly qualified nurses who had successfully completed a diploma or degree from one of the universities; a response rate of 77% representing 49% of all graduating students in the study population. Data were collected by self-completed semi-structured questionnaires administered to students at the time of qualification and at three months post-qualification. Routinely collected data from the universities were also collected. Fifty two percent of participants had been offered a job at the point of qualification (85% of those who had applied and been interviewed). Of these, 99% had been offered a nursing post, 88% in the city studied, 67% in the healthcare setting where they had completed a course placement. 44% felt "confident" and 32% "very confident" about their employment prospects. Predictors of employment success included ethnicity, specialty of nursing and university attended. Predictors of confidence and preparedness for job seeking included ethnicity, nursing specialty, gender and grade of degree. Newly qualified nurses from non-White/British ethnic groups were less likely to get a job and feel confident about and prepared for job seeking. This

  14. Similarity principles for seismic qualification of equipment by experience data

    International Nuclear Information System (INIS)

    Kana, D.D.; Pomerening, D.J.

    1989-01-01

    A methodology is developed for seismic qualification of nuclear plant equipment by applying similarity principles to existing experience data. Experience data is that available from previous qualifications by analysis or testing, or from actual earthquake events. Similarity principles are defined in terms of excitation, equipment physical characteristics, and equipment response. Physical similarity is further defined in terms of a critical transfer function for response at a location on a primary structure, whose response can be assumed directly related to fragility of the item under elevated levels of excitation. Procedures are developed for combining experience data into composite specifications for qualification of equipment that can be shown to be physically similar to the reference equipment. Other procedures are developed for extending qualifications beyond the original specifications under certain conditions. Some examples for application and verification of the procedures are given for actual test data available from previous qualifications. The developments are intended to elaborate on the rather broad guidelines by the IEEE 344 Standards Committee for equipment qualification in new nuclear plants. The results also contribute to filling a gap that exists between the IEEE 344 methodology and that which was previously developed for equipment in existing plants by the Seismic Qualification Utilities Group. 10 refs., 9 figs., 1 tab

  15. Revision of the qualification framework at the Technical University of Denmark Part 2

    DEFF Research Database (Denmark)

    Henneberg, Kaj-Åge; Kuhn, Luise Theil; Jungersen, Gregers

    2017-01-01

    Using a revised Qualification Framework (QF) with four main categories: -to know, - to be, -to interact, and -to do, this paper demonstrates how to use the elements of the QF to construct Programme-Qualification Matrices. A general Programme- Qualification Matrix defines the qualifications and th...

  16. Instrumentation qualification. Seismic qualification of C-E instrumentation equipment. Part One

    International Nuclear Information System (INIS)

    1977-05-01

    A summary of the C-E seismic qualification program utilized to demonstrate the seismic design adequacy of the instrumentation and control equipment used in C-E supplied Nuclear Steam Supply Systems (NSSS) is presented. The report is divided into two parts. Part One includes the equipment seismic requirements and a description of the qualification methods. Part Two lists the specific equipment by nuclear station in which it is used and the equipment test results are summarized in a standard data sheet format to facilitate review. The seismic requirements are based on individual contract commitments with C-E customers and the NRC Standard Review Plan, Section 3.10 ''Seismic Qualification of Category I Instrumentation and Electrical Equipment.'' Equipment is qualified for use in a seismic environment where damage potential to the equipment is less than or equal to that simulated seismic environment to which it has been qualified. The anticipated Safe Shutdown Earthquake (SSE) environment at the inservice location of equipment should be confirmed by each applicant as not exceeding that to which it is qualified

  17. INDUSTRIAL RESTRUCTURING AND PROFESSIONAL QUALIFICATION REQUIREMENTS

    Directory of Open Access Journals (Sweden)

    João Amato Neto

    2014-09-01

    Full Text Available Among the most complex subjects that affect modern society in this early millennium, the problem of relationships between the educational patterns and the work organization seems to be one of the most important and full of uncertainties. Specially, this problem acquires greater relevance when one thinks of the impacts of the techno-scientific revolution in the work world, as well as in the educational system. In this sense, the present work researches some elements regarding the new educational patterns and qualification requirements in face of the new industrial paradigm and discusses the transformations accomplished by the techno-scientific revolution and its implications on the new lean and flexible production paradigm and on the (reorganization of work in the modern industry. The methodological approach is based on a bibliographic revision with a quantitative approach.

  18. Response Variability in Commercial MOSFET SEE Qualification

    International Nuclear Information System (INIS)

    George, J. S.; Clymer, D. A.; Turflinger, T. L.; Mason, L. W.; Stone, S.

    2016-01-01

    Single-event effects (SEE) evaluation of five different part types of next generation, commercial trench MOSFETs indicates large part-to-part variation in determining a safe operating area (SOA) for drain-source voltage (V_D_S) following a test campaign that exposed >50 samples per part type to heavy ions. These results suggest a determination of a SOA using small sample sizes may fail to capture the full extent of the part-to-part variability. An example method is discussed for establishing a Safe Operating Area using a one-sided statistical tolerance limit based on the number of test samples. Finally, burn-in is shown to be a critical factor in reducing part-to-part variation in part response. Implications for radiation qualification requirements are also explored.

  19. Environmental qualification program for Krsko NPP

    International Nuclear Information System (INIS)

    Cerjak, J.; Klenovsek, P.; Pavsek, J.; Freeland, K.R.; Spalj, S.

    1998-01-01

    NEK plant components, including those critical to safe plant operation, deteriorate and wear over service life due to the effects of aging and harsh environmental conditions. Since the plant environment is a source of common-cause failures, an Environmental Qualification (EQ) program is required to ensure and demonstrate the ability of safety-related equipment to perform its design safety function during a design-basis (DBE), even after aging over its service life in the plant. EQ is a requirement for plants licensed by the US NRC, in accordance with 10 CFR 50.49, Regulatory Guide 1.89, NUREG-0588, and IEEE-323. This paper presents the current EQ Program status at Krsko NPP.(author)

  20. The COPD Biomarker Qualification Consortium (CBQC)

    DEFF Research Database (Denmark)

    Casaburi, Richard; Celli, Bartolome; Crapo, James

    2013-01-01

    Abstract Knowledge about the pathogenesis and pathophysiology of chronic obstructive pulmonary disease (COPD) has advanced dramatically over the last 30 years. Unfortunately, this has had little impact in terms of new treatments. Over the same time frame, only one new class of medication for COPD......, and no interested party has been in a position to undertake such a process. In order to facilitate the development of novel tools to assess new treatments, the Food and Drug Administration, in collaboration with the COPD Foundation, the National Heart Lung and Blood Institute and scientists from the pharmaceutical...... industry and academia conducted a workshop to survey the available information that could contribute to new tools. Based on this, a collaborative project, the COPD Biomarkers Qualification Consortium, was initiated. The Consortium in now actively preparing integrated data sets from existing resources...

  1. Qualification of quality testing personnel, in particular the training offered

    International Nuclear Information System (INIS)

    Knoedler, D.

    1980-01-01

    Personnel qualification is one of the most important tasks of quality assurance. The qualification is reached by professional education, by experience made on the job and by additional external and company-internal training. A determination of qualification requirements should cover only the general principles. Especially this should be considered specifying the requirements for theoretical knowledge and for examinations since the factor of relevant experience is difficult to be estimated by third parties. Equal principles apply for the personnel of the manufacturer, of the main contractor, of the utility and of the auhtorized inspectors' organizations. The detailed guidelines should be part of the internal QA-systems of the organizations involved. (orig.) [de

  2. European methodology for qualification of NDT as developed by ENIQ

    International Nuclear Information System (INIS)

    Champigny, F.; Sandberg, U.; Engl, G.; Crutzen, S.; Lemaitre, P.

    1997-01-01

    The European Network for Inspection Qualification (ENIQ) groups the major part of the nuclear power plant operators in the European Union (and Switzerland). The main objective of ENIQ is to co-ordinate and manage at European level expertise and resources for the qualification of NDE inspection systems, primarily for nuclear components. In the framework of ENIQ the European methodology for qualification of NDT has been developed. In this paper the main principles of the European methodology are given besides the main activities and organisation of ENIQ. (orig.)

  3. Challenges of equipment qualification using today's standards with emphasis on a class 1E motor program

    International Nuclear Information System (INIS)

    Deaton, K.

    1995-01-01

    This paper describes qualification of new equipment for safety related service in the nuclear power industry in accordance with current industry standards. This topic is presented from the perspective of an original equipment manufacturer J(OEM). Equipment qualification is first discussed in a general way then an example is provided of an electric motor qualification. A review of alternative qualification methods including commercial dedication is included. Potential difficulties with alternative/expedited qualification methods are also discussed

  4. ITER ECRH Upper Launcher: Test plan for qualification of the Diamond Torus Window Prototype III

    Energy Technology Data Exchange (ETDEWEB)

    Schreck, Sabine, E-mail: sabine.schreck@kit.edu [Karlsruhe Institute of Technology, Institute for Applied Materials, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Aiello, Gaetano; Meier, Andreas; Strauss, Dirk [Karlsruhe Institute of Technology, Institute for Applied Materials, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Gagliardi, Mario; Saibene, Gabriella [F4E, Antennas and Plasma Engineering, Josep Pla 2, Torres Diagonal Litoral B3, 08019 Barcelona (Spain); Scherer, Theo [Karlsruhe Institute of Technology, Institute for Applied Materials, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany)

    2016-11-01

    Highlights: • A qualification program for the ITER diamond torus window is being developed. • The testing program for the qualification of the bare diamond disk is defined. • First qualification tests show a very good quality of the diamond disk prototypes. - Abstract: The diamond window is part of the electron cyclotron heating upper launcher system for ITER. Together with the isolation valve it constitutes the primary vacuum boundary and it also acts as first tritium barrier. Therefore the window is classified as Safety/Protection Important Component (SIC/PIC) with the nuclear safety function “confinement”. As the diamond window unit is not entirely covered by standard codes, an ad-hoc qualification program needs to be defined, including analysis, prototyping and testing. In the framework of a contract with F4E, the test program for a diamond window prototype is being developed with the aim to prove its operability for normal, accidental and incidental conditions as identified in the ITER load specifications. Tests range from dielectric loss measurements for the bare Chemical Vapour Deposition (CVD) diamond disk up to mechanical and vacuum tests for the complete window assembly. Finally mm-wave properties have to be characterized for the complete window. A clear definition of the testing requirements and of the acceptance criteria is necessary as well as a complete documentation of the process. This paper will present the development of the test plan for a window prototype, which is currently under manufacturing. First tests are directed to the characterization of the bare diamond disk with a focus on its dielectric properties.

  5. Meeting the latest qualification requirements for Class 1E protection system equipment: a practical approach

    International Nuclear Information System (INIS)

    Daigle, R.P.; Breen, R.J.

    1977-01-01

    The requirements for qualifying Class 1E equipment for Nuclear Power Generating Stations were significantly revised in 1974 and 1975. These new requirements reflect the desire of the industry to provide improved methods of determining the qualification of this vital equipment. The revised standards do, in fact, meet these industry goals in a generally acceptable manner. The Nuclear Regulatory Commission is presently requiring utilities to comply with these revised standards and regulatory guides in order to obtain the necessary permits. Manufacturers are developing and implementing programs to comply with the new requirements. One of the more difficult new requirements of qualification is aging to achieve advanced life condition. The objectives and methods described for aging are difficult for much of the equipment within the Protection System. The use of thermal and vibrational techniques to simulate aging is valid for some components (i.e., capacitors, transistors, cable and/or motor insulation) but may be neither valid nor practical for many items (e.g., complete instrument systems, etc.). A seemingly obvious approach, although rarely followed, in regarding new or revised standards is to refrain from making any type of commitment until the standards are thoroughly understood. Often too hasty a decision is made by a utility (concerned about licensing) or a manufacturer (concerned about being competitive) to commit to new requirements. Consequently, the broad range of interpretations that usually develops for a given set of requirements may result in difficult relations between organizations. This paper deals with solutions for qualification in a practical sense, with emphasis on the aging issue and does not elaborate on seismic qualification

  6. Instant MuseScore

    CERN Document Server

    Shinn, Maxwell

    2013-01-01

    Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. Instant MuseScore is written in an easy-to follow format, packed with illustrations that will help you get started with this music composition software.This book is for musicians who would like to learn how to notate music digitally with MuseScore. Readers should already have some knowledge about musical terminology; however, no prior experience with music notation software is necessary.

  7. Program plan for environmental qualification of mechanical and dynamic (including seismic) qualification of mechanical and electrical equipment program (EDQP)

    International Nuclear Information System (INIS)

    Weidenhamer, G.H.

    1986-06-01

    The equipment qualification program described in this plan is intended to provide the technical basis for resolving uncertainties in existing equipment qualification standards. In addition, research results are contributing to the resolution of safety issues GI-23, GI-87, USI-A44, titled, ''Reactor Coolant Pump Seal Failure,'' ''Failure of HPCI Steam Line Without Isolation,'' and ''Station Blackout,'' respectively. Also, research effort is being directed at providing information on the behavior of containment isolation valves under severe accident environments. Although the results of the latter research will not contribute to resolving uncertainties in qualification standards, it has proven cost effective to obtain this information under this program

  8. An investigation of individual functionality football referees qualifications

    Directory of Open Access Journals (Sweden)

    S.M. Berezka

    2014-12-01

    Full Text Available Purpose: determine the level of individual functionality referees qualifications. Objective of the study was to determine the physiological parameters characterizing the functionality of football referees qualifications. Material : mainly experiment involved 29 highly qualified referees aged 21-45 years. In the main experiment participated 29 referees and 40 assistant referees (n = 69 Ukrainian Premier League. Results: found that the means and methods that use Ukrainian football referee high qualification in the special physical training for a competition, are not effective enough. Consequence of poorly planned training process is to increase the number of wrong decisions of the referees during the match associated with poor motor activity. Conclusions: data obtained in the course of educational research confirmed our theory about the necessity of individualization process special physical training qualifications of referees, which would entail increasing the functional and motor abilities of the referees, and as a consequence of better and successful completion of the work.

  9. 75 FR 77947 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2010-12-14

    ... safety mandated by the statutes. Qualifications of Applicants Richard B. Angus Mr. Angus, age 55, has had... monitoring; has stable control of his diabetes using insulin; and is able to drive a CMV safely. Mr. Angus...

  10. 48 CFR 6301.2 - Qualifications of members.

    Science.gov (United States)

    2010-10-01

    ... contract law. ... CONTRACT APPEALS BOARD OF CONTRACT APPEALS 6301.2 Qualifications of members. Each member of the Board must... administrative law judges appointed pursuant to section 3105 of title 5 of the United States Code, with the...

  11. Inspection procedure and essential parameters in NDT qualification

    International Nuclear Information System (INIS)

    Sarkimo, M.

    2000-06-01

    The objective of the inspection qualification is to ensure that applied non-destructive methods (NDT) have the required performance. The approach of the qualification process is systematic and carefully documented and therefore some new requirements can be seen concerning the composition of the documentation. There are also new document types, that only application of the inspection qualification requires. The most important of these is the technical justification, that includes the documented evidences concerning the performance of the inspection system. This publication includes two reports: 'Compilation of the inspection procedure' and 'Essential/influential parameters in NDT qualification'. The former of these discusses the issues to be considered in an inspection procedure especially from the point of view of the mechanised ultrasonic testing. The later report explains the parameters formulated to analyse in the technical justification all aspects of the inspection application. (orig.)

  12. Virtual design and qualification of IC backend structures

    NARCIS (Netherlands)

    Silfhout, van R.B.R.; Sluis, van der O.; Driel, van W.D.; Janssen, J.H.J.; Zhang, G.Q.

    2006-01-01

    For Integrated Circuit (IC) wafer backend development, process developers have to design robust backend structures that guarantee both functionality and reliability during waferfab processes, packaging, qualification tests and lifetime. Figure 1 shows a simplified diagram for the design (and

  13. Navigating the National Qualifications Framework (NQF): The role of ...

    African Journals Online (AJOL)

    Navigating the National Qualifications Framework (NQF): The role of career guidance. ... opportunities (including, but not confined to, those within higher education). ... It argues that the time is ripe for a high-level national career development ...

  14. Guidelines for seismic qualification by experience in ALWRs

    International Nuclear Information System (INIS)

    Bandyopadhyay, K.K.

    1993-01-01

    The methodologies and acceptance criteria for seismic qualification of equipment are provided in IEEE Std. 344 endorsed by the Nuclear Regulatory Commission (NRC) in the Standard Review Plan. The IEEE Standard allows seismic qualification by use of the similarity analysis method. Data available from past earthquake events or vibration tests can be used in this regard. The nuclear industry has collected a vast amount of earthquake experience and test data in the last decade, and is planning to use it for seismic qualification of equipment in advanced light water reactor (ALWR) plants. This paper discusses the existing data bases including their limitations and describes the ways these data bases can be used for equipment qualification in ALWR plants

  15. Relating Teaching Qualifications and Basic Need Satisfaction in Medical Teaching

    NARCIS (Netherlands)

    Engbers, R.; Fluit, C.R.; Bolhuis, S.; Sluiter, R.; Stuyt, P.M.; Laan, R.F.; Wade, S.L.

    2017-01-01

    INTRODUCTION: Teaching Qualifications (TQs) have been implemented in University Medical Centers, but their relation to teachers’ motivation for medical teaching is unknown. Because teacher motivation influences important outcomes, it is crucial to study how TQs are related to promoting teacher

  16. Present stage evaluation of Furnas calculus methodology qualification

    International Nuclear Information System (INIS)

    1987-07-01

    This technical note is about the present stage evaluation of FURNAS Calculus Methodology Qualification related to reload licensing process and licensing support of operation questions of Angra 1 NPP concerning transient and Core ThermalHydraulic areas. (Author) [pt

  17. 78 FR 76399 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-12-17

    ...-2013-0185] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... its decision to exempt 37 individuals from its rule prohibiting persons with insulin-treated diabetes... receipt of Federal diabetes exemption applications from [[Page 76400

  18. 76 FR 9854 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2011-02-22

    ...-0011] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA). ACTION: Notice of applications for exemption from the diabetes mellitus... exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating...

  19. 78 FR 1923 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-01-09

    ...-0350] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA). ACTION: Notice of applications for exemption from the diabetes mellitus... exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating...

  20. 77 FR 3549 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-01-24

    ...-0368] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT. ACTION: Notice of applications for exemption from the diabetes... individuals for exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM...

  1. 77 FR 5873 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-02-06

    ...-2011-0326] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce. The... diabetes exemption applications from fifteen individuals and requested comments from the public (76 FR...

  2. 76 FR 9862 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2011-02-22

    ...-0025] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA). ACTION: Notice of applications for exemption from the diabetes mellitus... exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating...

  3. 78 FR 1927 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-01-09

    ...-0351] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA). ACTION: Notice of applications for exemption from the diabetes mellitus... exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating...

  4. 78 FR 63285 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-10-23

    ... Mr. Van Gog understands diabetes management and monitoring, has stable control of his diabetes using...-0185] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier... against persons with insulin- treated diabetes mellitus (ITDM) operating commercial motor vehicles (CMVs...

  5. Guidelines for seismic qualification by experience in ALWRs

    International Nuclear Information System (INIS)

    Bandyopadhyay, K.K.

    1994-01-01

    The methodologies and acceptance criteria for seismic qualification of equipment are provided in IEEE Std. 344 endorsed by the Nuclear Regulatory Commission (NRC) in the Standard Review Plan. The IEEE Standard allows seismic qualification by use of the similarity analysis method. Data available from past earthquake events or vibration tests can be used in this regard. The nuclear industry has collected a vast amount of earthquake experience and test data in the last decade, and is planning to use it for seismic qualification of equipment in advanced light water reactor (ALWR) plants. This paper discusses the existing data bases including their limitations and describes the ways these data bases can be used for equipment qualification in ALWR plants

  6. 76 FR 64165 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2011-10-17

    ...-0277] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA). ACTION: Notice of applications for exemption from the diabetes mellitus... individuals for exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM...

  7. 77 FR 533 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-01-05

    ...-0367] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA). ACTION: Notice of applications for exemption from the diabetes mellitus... for exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM...

  8. 78 FR 38439 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-06-26

    ...-0020] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA). ACTION: Notice of applications for exemption from the diabetes mellitus... exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating...

  9. 78 FR 14406 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-03-05

    ...-0013] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT. ACTION: Notice of applications for exemption from the diabetes... individuals for exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM...

  10. 76 FR 61140 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2011-10-03

    ...-0194] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT. ACTION: Notice of applications for exemption from the diabetes... individuals for exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM...

  11. 77 FR 40941 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-07-11

    ...-0163] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA). ACTION: Notice of applications for exemption from the diabetes mellitus... exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating...

  12. 77 FR 70530 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-11-26

    ...-0348] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT. ACTION: Notice of applications for exemption from the diabetes... revision must provide for individual assessment of drivers with diabetes mellitus, and be consistent with...

  13. 77 FR 46149 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-08-02

    ...-0164] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA). ACTION: Notice of applications for exemption from the diabetes mellitus... exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating...

  14. 77 FR 64181 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-10-18

    ...-0283] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA). ACTION: Notice of applications for exemption from the diabetes mellitus... exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating...

  15. 78 FR 26419 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-05-06

    ...-0018] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA). ACTION: Notice of applications for exemption from the diabetes mellitus... exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating...

  16. 77 FR 52384 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-08-29

    ...-0218] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier... from the diabetes mellitus requirement; request for comments. SUMMARY: FMCSA announces receipt of... diabetes mellitus (ITDM) operating commercial motor vehicles (CMVs) in interstate commerce. If granted, the...

  17. 77 FR 56258 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-09-12

    ...-0219] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA). ACTION: Notice of applications for exemption from the diabetes mellitus... exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating...

  18. 78 FR 38435 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-06-26

    ...-0181] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA). ACTION: Notice of applications for exemption from the diabetes mellitus... exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating...

  19. 76 FR 66120 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2011-10-25

    ...-0278] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA). ACTION: Notice of applications for exemption from the diabetes mellitus... exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating...

  20. 78 FR 20381 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-04-04

    ...-0015] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA). ACTION: Notice of applications for exemption from the diabetes mellitus... exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating...

  1. 77 FR 65931 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-10-31

    ...-0347] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier... diabetes mellitus requirement; request for comments. SUMMARY: FMCSA announces receipt of applications from 12 individuals for exemption from the prohibition against persons with insulin-treated diabetes...

  2. 77 FR 10612 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-02-22

    ...-0382] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA). ACTION: Notice of applications for exemption from the diabetes mellitus... exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating...

  3. 78 FR 79062 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-12-27

    ...-0193] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier Safety Administration (FMCSA). ACTION: Notice of applications for exemption from the diabetes mellitus... exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating...

  4. Development of the siriraj clinical asthma score.

    Science.gov (United States)

    Vichyanond, Pakit; Veskitkul, Jittima; Rienmanee, Nuanphong; Pacharn, Punchama; Jirapongsananuruk, Orathai; Visitsunthorn, Nualanong

    2013-09-01

    Acute asthmatic attack in children commonly occurs despite the introduction of effective controllers such as inhaled corticosteroids and leukotriene modifiers. Treatment of acute asthmatic attack requires proper evaluation of attack severity and appropriate selection of medical therapy. In children, measurement of lung function is difficult during acute attack and thus clinical asthma scoring may aid physician in making further decision regarding treatment and admission. We enrolled 70 children with acute asthmatic attack with age range from 1 to 12 years (mean ± SD = 51.5 ± 31.8 months) into the study. Twelve selected asthma severity items were assessed by 2 independent observers prior to administration of salbutamol nebulization (up to 3 doses at 20 minutes interval). Decision for further therapy and admission was made by emergency department physician. Three different scoring systems were constructed from items with best validity. Sensitivity, specificity and accuracy of these scores were assessed. Inter-rater reliability was assessed for each score. Review of previous scoring systems was also conducted and reported. Three severity items had poor validity, i.e., cyanosis, depressed cerebral function, and I:E ratio (p > 0.05). Three items had poor inter-rater reliability, i.e., breath sound quality, air entry, and I:E ratio. These items were omitted and three new clinical scores were constructed from the remaining items. Clinical scoring system comprised retractions, dyspnea, O2 saturation, respiratory rate and wheezing (rangeof score 0-10) gave the best accuracy and inter-rater variability and were chosen for clinical use-Siriraj Clinical Asthma Score (SCAS). A Clinical Asthma Score that is simple, relatively easy to administer and with good validity and variability is essential for treatment of acute asthma in children. Several good candidate scores have been introduced in the past. We described the development of the Siriraj Clinical Asthma Score (SCAS) in

  5. SRNL PHASE 1 Assessment Of The WTP Waste Qualification Program

    International Nuclear Information System (INIS)

    Peeler, D.; Hansen, E.; Herman, C.; Marra, S.; Wilmarth, B.

    2012-01-01

    The Hanford Tank Waste Treatment and Immobilization Plant (WTP) Project is currently transitioning its emphasis from an engineering design and construction phase toward facility completion, start-up and commissioning. With this transition, the WTP Project has initiated more detailed assessments of the requirements that must be met during the actual processing of the Hanford Site tank waste. One particular area of interest is the waste qualification program. In general, the waste qualification program involves testing and analysis to demonstrate compliance with waste acceptance criteria, determine waste processability, and demonstrate laboratory-scale unit operations to support WTP operations. The testing and analysis are driven by data quality objectives (DQO) requirements necessary for meeting waste acceptance criteria for transfer of high-level wastes from the tank farms to the WTP, and for ensuring waste processability including proper glass formulations during processing within the WTP complex. Given the successful implementation of similar waste qualification efforts at the Savannah River Site (SRS) which were based on critical technical support and guidance from the Savannah River National Laboratory (SRNL), WTP requested subject matter experts (SMEs) from SRNL to support a technology exchange with respect to waste qualification programs in which a critical review of the WTP program could be initiated and lessons learned could be shared. The technology exchange was held on July 18-20, 2011 in Richland, Washington, and was the initial step in a multi-phased approach to support development and implementation of a successful waste qualification program at the WTP. The 3-day workshop was hosted by WTP with representatives from the Tank Operations Contractor (TOC) and SRNL in attendance as well as representatives from the US DOE Office of River Protection (ORP) and the Defense Nuclear Facility Safety Board (DNFSB) Site Representative office. The purpose of the

  6. The lod score method.

    Science.gov (United States)

    Rice, J P; Saccone, N L; Corbett, J

    2001-01-01

    The lod score method originated in a seminal article by Newton Morton in 1955. The method is broadly concerned with issues of power and the posterior probability of linkage, ensuring that a reported linkage has a high probability of being a true linkage. In addition, the method is sequential, so that pedigrees or lod curves may be combined from published reports to pool data for analysis. This approach has been remarkably successful for 50 years in identifying disease genes for Mendelian disorders. After discussing these issues, we consider the situation for complex disorders, where the maximum lod score (MLS) statistic shares some of the advantages of the traditional lod score approach but is limited by unknown power and the lack of sharing of the primary data needed to optimally combine analytic results. We may still learn from the lod score method as we explore new methods in molecular biology and genetic analysis to utilize the complete human DNA sequence and the cataloging of all human genes.

  7. The Bayesian Score Statistic

    NARCIS (Netherlands)

    Kleibergen, F.R.; Kleijn, R.; Paap, R.

    2000-01-01

    We propose a novel Bayesian test under a (noninformative) Jeffreys'priorspecification. We check whether the fixed scalar value of the so-calledBayesian Score Statistic (BSS) under the null hypothesis is aplausiblerealization from its known and standardized distribution under thealternative. Unlike

  8. South African Scoring System

    African Journals Online (AJOL)

    2014-11-18

    Nov 18, 2014 ... for 80% (SASS score) and 75% (NOT) of the variation in the regression model. Consequently, SASS ... further investigation: spatial analyses of macroinvertebrate assemblages; and the use of structural and functional metrics. Keywords: .... conductivity levels was assessed using multiple linear regres- sion.

  9. Developing Scoring Algorithms

    Science.gov (United States)

    We developed scoring procedures to convert screener responses to estimates of individual dietary intake for fruits and vegetables, dairy, added sugars, whole grains, fiber, and calcium using the What We Eat in America 24-hour dietary recall data from the 2003-2006 NHANES.

  10. ENIQ: European Network for Inspection Qualification: Status report

    International Nuclear Information System (INIS)

    Champigny, F.; Sandberg, U.; Crutzen, S.; Lemaitre, P.

    1998-01-01

    The European Network for Inspection Qualification (ENIQ) groups the major part of the nuclear power plant operators in the European Union (and Switzerland). The main objective of ENIQ is to co-ordinate and manage at European level expertise and resources for the qualification of NDE inspection systems, primarily for nuclear components. In this paper the main activities, organisation and actual status of ENIQ are discussed. (author)

  11. French nuclear plant safeguard pump qualification testing: EPEC test loop

    International Nuclear Information System (INIS)

    Guesnon, H.

    1985-01-01

    This paper reviews the specifications to which nuclear power plant safeguard pumps must be qualified, and surveys the qualification methods and program used in France to verify operability of the pump assembly and major pump components. The EPEC test loop is described along with loop capabilities and acheivements up to now. This paper shows, through an example, the Medium Pressure Safety Injection Pump designed for service in 1300 MW nuclear power plants, and the interesting possibilities offered by qualification testing

  12. Technical evaluation of seismic qualification of safety-related equipment

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Yang Hui; Park, Heong Gee; Park, Yeong Seok [Univ. of Incheon, Incheon (Korea, Republic of)

    1994-04-15

    This study is purposed to evaluate the technical acceptability of the procedures and techniques of seismic qualifications which were performed for the YGN 3 and 4 safety-related equipment.This study is also targeted to suggest a systematized technical procedure guide for the effective performance and review of the seismic qualification, which reflects the most up-to-date licensing requirements and state-of the-art.

  13. Nuclear power plants. Electrical equipment of the safety system. Qualification

    International Nuclear Information System (INIS)

    2001-01-01

    This International Standard applies to electrical parts of safety systems employed at nuclear power plants, including components and equipment of any interface whose failure could affect unfavourably properties of the safety system. The standard also applies to non-electrical safety-related interfaces. Furthermore, the standard describes the generic process of qualification certification procedures and methods of qualification testing and related documentation. (P.A.)

  14. Qualification of a novel deepwater gas / liquid separator

    Energy Technology Data Exchange (ETDEWEB)

    Abrand, Stephanie

    2010-07-01

    The implementation of subsea boosting and processing systems is becoming a common development scheme for the development of deep and ultra-deep water fields. Those subsea processing systems shall address the mechanical and functional constraints that are imposed by the deepwater installation and operation along with the obvious reliability requirements. Saipem has developed a deepwater gas separation and liquid boosting system that encompasses a good flexibility in handling a wide range of steady and unsteady multiphase input streams and a relatively simple mechanical arrangement. The system is composed of an array of vertical pipes that contributes in providing the required separation and liquid hold up volumes. The reduced diameter and wall thickness of the vertical pipes, as compared with the equivalent single separation vessel, is particularly suited in deep and ultra-deep water applications and/or high pressure services. Furthermore, the system relies on the gravity separation whose efficiency is ensured by its ability to accommodate large variety of input flowrate and un-steady regimes. In the continuous effort of providing reliable and proven process solutions to the market, Saipem has undertaken a qualification program focused to characterise and demonstrate the system versatility and separation performances, that will involve model testing in multiphase conditions. (Author)

  15. Qualification tests for ITER TF conductors in SULTAN

    International Nuclear Information System (INIS)

    Bruzzone, P.; Stepanov, B.; Wesche, R.

    2009-01-01

    From February 2007 to May 2008, 18 short length conductor sections have been tested in SULTAN for design verification and manufacturer qualification of the ITER Toroidal Field (TF) conductor. The test program is focussed on the current sharing temperature, T cs , at the nominal operating conditions, 68 kA current and 11.15 T effective field, which can be fully reproduced in the SULTAN test facility. A broad range of results was observed, with over 2 K difference among the T cs of the conductors. In average, the results are poorer compared to the potential performance estimated from the strand scaling law. The key parameters to mitigate the degradation are not yet clearly identified. The experimental challenges to test conductors with performance degradation are highlighted, including enhanced instrumentation sets, the application of gas flow calorimetry to sense the current sharing power and the post-processing of voltage data to cancel the transverse potential across the cable. The updated schedule of the tests in SULTAN is presented with the short-term action plan for conductor test.

  16. CST receiver tube qualification, Phase 1, Investigation - Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Mack, I.; Rossy, J.-P.

    2010-05-15

    In this report the different application possibilities for concentrated solar thermal (CST) systems are studied. Further, the possible measuring methods for characterising and qualifying the receivers with their embedded absorber tubes are investigated. The investigations show that CST systems can be used as an environmentally friendly alternative to fossil fuels in many applications. The best known one is the generation of electrical power, but concentrated solar energy can also be used for desalination, industrial process heat, and for cooling of buildings. Industrial process heat is a large potential area with temperature in the range of 120 {sup o}C to over 400 {sup o}C. Heat below 400 {sup o}C can be provided by various parabolic trough and Fresnel systems, which are optimised for the temperature required. In order to further increase the usage of CST systems, it is of great importance to provide standards for the qualification and characterisation of the different components of the CST systems. Huge efforts are currently made to define a standard for evacuated receiver tubes. For the characterisation of the black absorber tubes the development is still at the beginning, although the need here is also given. (authors)

  17. Instructor qualification for radiation safety training at a national laboratory

    International Nuclear Information System (INIS)

    Trinoskey, P.A.

    1994-10-01

    Prior to 1993, Health Physics Training (HPT) was conducted by the Lawrence Livermore National Laboratory (LLNL) health physics group. The job requirements specified a Masters Degree and experience. In fact, the majority of Health Physicists in the group were certified by the American Board of Health Physics. Under those circumstances, it was assumed that individuals in the group were technically qualified and the HPT instructor qualification stated that. In late 1993, the Health Physics Group at the LLNL was restructured and the training function was assigned to the training group. Additional requirements for training were mandated by the Department of Energy (DOE), which would necessitate increasing the existing training staff. With the need to hire, and the policy of reassignment of employees during downsizing, it was imperative that formal qualification standards be developed for technical knowledge. Qualification standards were in place for instructional capability. In drafting the new training qualifications for instructors, the requirements of a Certified Health Physicists had to be modified due to supply and demand. Additionally, for many of the performance-based training courses, registration by the National Registry of Radiation Protection Technologists is more desirable. Flexibility in qualification requirements has been incorporated to meet the reality of ongoing training and the compensation for desirable skills of individuals who may not meet all the criteria. The qualification requirements for an instructor rely on entry-level requirements and emphasis on goals (preferred) and continuing development of technical and instructional capabilities

  18. On tungsten technologies and qualification for DEMO

    International Nuclear Information System (INIS)

    Laan, J. van der; Hegeman, H.; Wouters, O.; Luzginova, N.; Jonker, B.; Van der Marck, S.; Opschoor, J.; Wang, J.; Dowling, G.; Stuivenga, M.; Carton, E.

    2009-01-01

    Tungsten alloys are considered prime candidates for the in-vessel components directly facing the plasma. For example, in the HEMJ helium cooled divertor design tiles may be operated at temperatures up to 1700 deg. C, supported by a structure partially consisting of tungsten at temperatures from 600 to 1000 deg. C, and connected to a HT steel structure. The tungsten armoured primary wall is operated at 500-900 deg. C. Irradiation doses will be few tens dpa at minimum, but FPR requirements for plants availability will stretch these targets. Recently injection moulding technology was developed for pure tungsten and representative parts were manufactured for ITER monobloc divertors and DEMO HEMJ thimbles. The major advantages for this technology are the efficient use of material feedstock/resources and the intrinsic possibility to produce near-finished product, avoiding machining processes that are costly and may introduce surface defects deteriorating the component in service performance. It is well suited for mass-manufacturing of components as well known in e.g. lighting industries. To further qualify this material technology various specimen types were produced with processing parameters identical to the components, and tested successfully, showing the high potential for implementation in (fusion) devices. Furthermore, the engineering approach can clearly be tailored away from conventional design and manufacturing technologies based on bulk materials. The technology is suitable for shaping of new W-alloys and W-ODS variants as well. Basically this technology allows a particular qualification trajectory. There is no need to produce large batches of material during the material development and optimization stage. For the verification of irradiation behaviour in the specific neutron spectra, there is a further attractive feature to use e.g. isotope tailored powders to adjust to available irradiation facilities like MTR's. In addition the ingrowth of transmutation

  19. Qualification Practices in Nuclear Industry: Steam Generator Eddy Current Probe Qualification

    International Nuclear Information System (INIS)

    Vavrous, M.; Gracin, R.

    2010-01-01

    Through history of nuclear power plant operation, a large number of nuclear power plant forced outages related to tube failures occurred. It resulted with large amount of repair and outage costs, what initiated implementation of regulated practice of periodical tube examination and tube condition monitoring. Purpose of examinations is to detect existing or potential tube degradations that could affect tube integrity and therefore result in forced outages and unwanted costs related to emergency repair activities and loss of ability for electrical power production. With increased examination activities, additional information about steam generator tube condition became available and additional methods for ensuring tube integrity became available. As the number of examination solutions increased, need for validation and assessment of examination methods occurred. For that purpose, a large number of standards and guidelines with its requirements were implemented in nuclear industry regulatory requirements to ensure that adequately validated examinations are applied. With this purpose, qualification requirements for inspection activities were implemented with other requirements. With progress of technology, progress was also achieved in examination methods and more advanced examination methods and advanced inspection systems were developed. This advancement is accompanied by advancement in regulatory requirements regarding inspection and monitoring of tube integrity and condition. Ultimate goal of implementation of qualification processes and its requirements in all aspects of nuclear industry is to achieve minimal rate of forced outages, which would ensure maximum electrical power production capabilities and maximum optimization of operational costs while maintaining safe operation in accordance with environmental policies. This article will focus on qualification of steam generator eddy current bobbin probe.(author).

  20. Credit scoring methods

    Czech Academy of Sciences Publication Activity Database

    Vojtek, Martin; Kočenda, Evžen

    2006-01-01

    Roč. 56, 3-4 (2006), s. 152-167 ISSN 0015-1920 R&D Projects: GA ČR GA402/05/0931 Institutional research plan: CEZ:AV0Z70850503 Keywords : banking sector * credit scoring * discrimination analysis Subject RIV: AH - Economics Impact factor: 0.190, year: 2006 http://journal.fsv.cuni.cz/storage/1050_s_152_167.pdf

  1. Credit scoring for individuals

    Directory of Open Access Journals (Sweden)

    Maria DIMITRIU

    2010-12-01

    Full Text Available Lending money to different borrowers is profitable, but risky. The profits come from the interest rate and the fees earned on the loans. Banks do not want to make loans to borrowers who cannot repay them. Even if the banks do not intend to make bad loans, over time, some of them can become bad. For instance, as a result of the recent financial crisis, the capability of many borrowers to repay their loans were affected, many of them being on default. That’s why is important for the bank to monitor the loans. The purpose of this paper is to focus on credit scoring main issues. As a consequence of this, we presented in this paper the scoring model of an important Romanian Bank. Based on this credit scoring model and taking into account the last lending requirements of the National Bank of Romania, we developed an assessment tool, in Excel, for retail loans which is presented in the case study.

  2. Environmental qualification testing of TFE valve components

    International Nuclear Information System (INIS)

    Eyvindson, A.; Krasinski, W.; McCutcheon, R.

    1997-01-01

    Valves containing tetrafluoroethylene (TFE) components are being used in many CANDU Nuclear Generating Stations. However, some concerns remain about the performance of TFE after exposure to high levels of radiation. Stations must therefore ensure that such valves perform reliably after being exposed to postulated accident radiation dose levels. The current Ontario Hydro Environmental Qualification [EQ] program specifies much higher postulated radiation exposure than the original design, to account for conditions following a LOCA. Initial assessments indicated that Teflon components would require replacement. Proof of acceptable performance can remove the need for large scale replacement, avoiding a significant cost penalty and preserving benefits due to the superior performance of TFE-based seals. A test program was undertaken at Chalk River Laboratories (CRL) to investigate the performance of three valves after irradiation to 10 Mrad. Such valves are currently used at the Bruce B Nuclear Generating Station. Each contains TFE packing rings; one also has TFE seats. Two of the valves are used in the ECIS recovery system, while the third is used for instrumentation loop isolation or as drain valves. All are exposed to little or no radiation during normal use. Based on the results of the tests, all the valves tested will still meet functional and performance requirements after the TFE components have been exposed to 10 Mrad of irradiation. (author)

  3. Implications of NUREG-1150 for equipment qualification

    International Nuclear Information System (INIS)

    Siu, R.P.; Sarram, M.

    1988-01-01

    Current USNRC regulations in 10CFR50 requires that structures, systems and components important to safety in a nuclear power plant are to be designed to accommodate the effects of harsh environments associated with potential accidents. Detailed regulatory requirements are as discussed in Regulatory Guide 1.89. Some of these regulatory requirements have been based upon rather outdated understanding of the phenomenology of severe accidents -- e.g., the radiation source terms for equipment qualification can be traced to TID-14844 which was originally published in 1962. Furthermore, the definition of important-to-safety in these regulatory requirements is rather broad, usually resulting in a long Q-list of equipment to be qualified for the design-basis Large LOCA. In the past few years, extensive research/analysis on severe accidents have been conducted -- from the IREP/NREP activities, the IDCOR programs, to the NUREG-1150 efforts. This paper reports that as a result of all these PRA-related activities, a much-improved understanding of the phenomenology and environmental conditions associated with severe accidents has been gained

  4. Workshop on environmental qualification of electric equipment

    International Nuclear Information System (INIS)

    Lofaro, R.; Gunther, W.; Villaran, M.; Lee, B.S.; Taylor, J.

    1994-05-01

    Questions concerning the Environmental Qualification (EQ) of electrical equipment used in commercial nuclear power plants have recently become the subject of significant interest to the US Nuclear Regulatory Commission (NRC). Initial questions centered on whether compliance with the EQ requirements for older plants were adequate to support plant operation beyond 40 years. After subsequent investigation, the NRC Staff concluded that questions related to the differences in EQ requirements between older and newer plants constitute a potential generic issue which should be evaluated for backfit, independent of license renewal activities. EQ testing of electric cables was performed by Sandia National Laboratories (SNL) under contract to the NRC in support of license renewal activities. Results showed that some of the environmentally qualified cables either failed or exhibited marginal insulation resistance after a simulated plant life of 20 years during accident simulation. This indicated that the EQ process for some electric cables may be non-conservative. These results raised questions regarding the EQ process including the bases for conclusions about the qualified life of components based upon artificial aging prior to testing

  5. At site qualification of accelerating tube dynodes

    International Nuclear Information System (INIS)

    Rajan, Rehim N.; Dewangan, S.; Sharma, D.K.

    2015-01-01

    A dc electron beam accelerator rated for 3 MeV encountered numerous vacuum side discharges at terminal voltage levels of 1800 kV. The cumulative rating of the accelerating tube in the system is 3350 kV. Pulsed currents in the order of 50 mA has been observed at the beam collector during these events along with voltage dips in terminal voltage. As dynode to dynode arcing is suspected to be the primary cause of this behaviour, it is desired to test the voltage withstanding capacity of each pair of dynodes. The accelerating tubes are rated for 335 kV at 6 kg/cm 2 SF 6 environment. However working at these pressures and testing of individual pairs of dynodes are impractical for qualification of dynodes of the 10 sets of accelerating tubes mounted in the accelerator. This problem has been overcome by using atmospheric pressure SF 6 and solid dielectrics. Experience of at site testing of the accelerating tube dynodes are described in this paper. (author)

  6. Philosophy, qualifications and training in Canada

    International Nuclear Information System (INIS)

    Rheaume, R.

    1989-01-01

    The Canadian nuclear power industry record concerning radiation protection is commendable, with low doses and no over-exposures, and this despite the much higher risk in this sector compared with the other sectors studied. Various technical factors have contributed towards this achievement, of course, but the philosophy adopted and the high level of qualification of the radiation protection personnel have played a major role. A great deal of work has been put into training nuclear plant operatives up to the desired level, since many were not particularly well-educated. The solution has been to improve the teaching aspect of the training, and to clearly identify the workers' needs by analyzing the tasks which they are required to perform. Consequently, the creation of a systematic training programme for users of radiation sources in universities and hospitals would help to improve radiation protection, especially as the users in this sector are generally better educated than the maintenance workers in power stations. In the mining sector, training does not have such a significant role to play in dose reduction, but it will nevertheless have an indirect impact: once miners know more about radiation and its health implications, their demands, on issues such as ventilation, for example, will become more specific and have more substance

  7. Workshop on environmental qualification of electric equipment

    Energy Technology Data Exchange (ETDEWEB)

    Lofaro, R.; Gunther, W.; Villaran, M.; Lee, B.S.; Taylor, J. [comps.] [Brookhaven National Lab., Upton, NY (United States)

    1994-05-01

    Questions concerning the Environmental Qualification (EQ) of electrical equipment used in commercial nuclear power plants have recently become the subject of significant interest to the US Nuclear Regulatory Commission (NRC). Initial questions centered on whether compliance with the EQ requirements for older plants were adequate to support plant operation beyond 40 years. After subsequent investigation, the NRC Staff concluded that questions related to the differences in EQ requirements between older and newer plants constitute a potential generic issue which should be evaluated for backfit, independent of license renewal activities. EQ testing of electric cables was performed by Sandia National Laboratories (SNL) under contract to the NRC in support of license renewal activities. Results showed that some of the environmentally qualified cables either failed or exhibited marginal insulation resistance after a simulated plant life of 20 years during accident simulation. This indicated that the EQ process for some electric cables may be non-conservative. These results raised questions regarding the EQ process including the bases for conclusions about the qualified life of components based upon artificial aging prior to testing.

  8. Qualification of Acts in the Context of Insignificance: Theoretical and Practical Issues

    Directory of Open Access Journals (Sweden)

    Irina G. Ragozina

    2016-01-01

    Full Text Available The article deals with the qualification of insignificance of act problematic issues, the impact of judicial discretion in the formation of judicial practice on the assessment of insignificance is reflected. The basic signs of insignificance are described, the conditions for recognition insignificant acts are defined. The authors come to the conclusion to exclude part 2 of Art. 14 of the Criminal Code of the Russian Federation and amend it by the article "Exemption from the criminal liability in connection with acts of insignificance", limiting the range of categories of such acts only to minor offenses committed by first time.

  9. Economies of using seismic experience data qualification methods at Department of Energy facilities

    International Nuclear Information System (INIS)

    Loceff, F.; Antaki, G.; Goen, L.

    1995-01-01

    This paper summarizes the implementation of the seismic qualification of existing equipment using experience data techniques. The emphasis is on the economies of this approach compared with standard qualification methods of analysis and testing or replacement with qualified equipment. Seismic qualification of existing equipment using experience data is a technical necessity and is the most economically attractive of the options. Representative costs for seismic qualification at two facilities show costs are substantially lower than the costs for qualification using conventional methods. Because of the experience to date, the authors recommend that the Department of Energy continue to sponsor the Existing Facilities Program for applying qualification using experience data techniques at DOE facilities

  10. Long range trajectories

    Energy Technology Data Exchange (ETDEWEB)

    Allen, P. W.; Jessup, E. A.; White, R. E. [Air Resources Field Research Office, Las Vegas, Nevada (United States)

    1967-07-01

    A single air molecule can have a trajectory that can be described with a line, but most meteorologists use single lines to represent the trajectories of air parcels. A single line trajectory has the disadvantage that it is a categorical description of position. Like categorized forecasts it provides no qualification, and no provision for dispersion in case the parcel contains two or more molecules which may take vastly different paths. Diffusion technology has amply demonstrated that an initial aerosol cloud or volume of gas in the atmosphere not only grows larger, but sometimes divides into puffs, each having a different path or swath. Yet, the average meteorologist, faced with the problem of predicting the future motion of a cloud, usually falls back on the line trajectory approach with the explanation that he had no better tool for long range application. In his more rational moments, he may use some arbitrary device to spread his cloud with distance. One such technique has been to separate the trajectory into two or more trajectories, spaced about the endpoint of the original trajectory after a short period of travel, repeating this every so often like a chain reaction. This has the obvious disadvantage of involving a large amount of labor without much assurance of improved accuracy. Another approach is to draw a circle about the trajectory endpoint, to represent either diffusion or error. The problem then is to know what radius to give the circle and also whether to call it diffusion or error. Meteorologists at the Nevada Test Site (NTS) are asked frequently to provide advice which involves trajectory technology, such as prediction of an aerosol cloud path, reconstruction of the motion of a volume of air, indication of the dilution, and the possible trajectory prediction error over great distances. Therefore, we set out, nearly three years ago, to provide some statistical knowledge about the status of our trajectory technology. This report contains some of the

  11. College Math Assessment: SAT Scores vs. College Math Placement Scores

    Science.gov (United States)

    Foley-Peres, Kathleen; Poirier, Dawn

    2008-01-01

    Many colleges and university's use SAT math scores or math placement tests to place students in the appropriate math course. This study compares the use of math placement scores and SAT scores for 188 freshman students. The student's grades and faculty observations were analyzed to determine if the SAT scores and/or college math assessment scores…

  12. A Motor Drive Electronics Assembly for Mars Curiosity Rover: An Example of Assembly Qualification for Extreme Environments

    Science.gov (United States)

    Kolawa, Elizabeth; Chen, Yuan; Mojarradi, Mohammad M.; Tudryn Weber, Carissa

    2013-01-01

    In this paper, the technology development and infusion of the motor drive electronics assembly, along with the technology qualification and space qualification, is described and detailed. The process is an example of the qualification methodology for extreme environmen

  13. Estimating NHL Scoring Rates

    OpenAIRE

    Buttrey, Samuel E.; Washburn, Alan R.; Price, Wilson L.; Operations Research

    2011-01-01

    The article of record as published may be located at http://dx.doi.org/10.2202/1559-0410.1334 We propose a model to estimate the rates at which NHL teams score and yield goals. In the model, goals occur as if from a Poisson process whose rate depends on the two teams playing, the home-ice advantage, and the manpower (power-play, short-handed) situation. Data on all the games from the 2008-2009 season was downloaded and processed into a form suitable for the analysis. The model...

  14. Financial qualifications review of applicants for nuclear power plant construction permits

    International Nuclear Information System (INIS)

    Hendrickson, P.L.; Mullen, M.F.; Carr, D.B.

    1988-09-01

    The NRC and its predecessor the AEC have had a regulatory requirement since 1956 that utilities seeking a construction permit for a nuclear power plant be financially qualified to construct and operate the plant. Several amendments to the requirements were made over the years including an attempt in 1982 to drop financial qualification review for electric utilities. This attempt was subsequently found invalid by a federal court. Nevertheless, financial qualification reviews consume significant amounts of NRC staff time and time at Atomic Safety and Licensing Board hearings. The analysis reported in this study was conducted to determine whether there is any empirical evidence of a relationship between a utility's financial health at the time of its construction permits application and the subsequent safety performance of the operating plant. The principal financial measures used to test for this relationship were bond rating, interest coverage ratio, debt/asset ratio, debt/equity ratio, and rate of return on equity. The principal safety measure was the long-term average of the scores assigned the utility in four key areas by the NRC under the Systematic Assessment of Licensee Performance program. The results of the analysis showed no evidence of a relationship between financial health at the time of the construction permit and subsequent safety performance. 7 refs., 16 figs., 4 tabs

  15. Data Qualification Report For: Thermodynamic Data File, DATA0.YMP.R0 For Geochemical Code, EQ3/6?

    International Nuclear Information System (INIS)

    P.L. Cloke

    2000-09-01

    The objective of this work is to evaluate the adequacy of chemical thermodynamic data provided by Lawrence Livermore National Laboratory (LLNL) as DataO.ymp.ROA in response to an input request submitted under AP-3.14Q. This request specified that chemical thermodynamic data available in the file, Data0.com.R2, be updated, improved, and augmented for use in geochemical modeling used in Process Model Reports (PMRs) for Engineered Barrier Systems, Waste Form, Waste Package, Unsaturated Zone, and Near Field Environment, as well as for Performance Assessment. The data are qualified in the temperature range 0 to 100 C. Several Data Tracking Numbers (DTNs) associated with Analysis/Model Reports (AMR) addressing various aspects of the post-closure chemical behavior of the waste package and the Engineered Barrier System that rely on EQ316 outputs to which these data are used as input, are Principal Factor affecting. This qualification activity was accomplished in accordance with the AP-SIII.2Q using the Technical Assessment method. A development plan, TDP-EBS-MD-000044, was prepared in accordance with AP-2.13Q and approved by the Responsible Manager. In addition, a Process Control Evaluation was performed in accordance with AP-SV.1Q. The qualification method, selected in accordance with AP-SIII.2Q, was Technical Assessment. The rationale for this approach is that the data in File Data0.com.R2 are considered Handbook data and therefore do not themselves require qualification. Only changes to Data0.com.R2 required qualification. A new file has been produced which contains the database Data0.ymp.R0, which is recommended for qualification as a result of this action. Data0.ymp.R0 will supersede Data0.com.R2 for all Yucca Mountain Project (YMP) activities

  16. Background information for NDT qualification of Finnish disposal canisters of spent fuel

    Energy Technology Data Exchange (ETDEWEB)

    Sarkimo, M. [VTT Technical Research Centre of Finland, Espoo (Finland); Pitkaenen, J.

    2013-12-15

    This report presents a review to basic concepts, which are applied in the qualification of non-destructive testing (NDT) techniques. The qualification systems developed and used in some countries are briefly described in the beginning of the report. Anyway the report mainly discusses the qualification practices applied in the Finnish nuclear industry. The Finnish Radiation and Nuclear Safety Authority (STUK) in the YVL Guide 3.8 define the Finnish qualification approach applied for the in-service inspections. The principles presented in this document follow the views of the international organisations: Nuclear Regulator Working Group (NRWG) and European Network for Inspection and Qualification (ENIQ). For the practical qualification work a national guideline is established using so called SP-documents that include specific rules and instructions for execution of qualifications in accordance with YVL Guide 3.8 principles. Altogether the Finnish qualification system can be seen very well to follow the European (ENIQ) methodology. The report discusses several qualification terms and documents. Thus the normally necessary tasks and parts of a qualification are described. The qualification can be seen as a project that includes several tasks, which will be performed by different parties. Enough resources and time should be reserved for the planning and control of a qualification project to ensure its fluent progress. Some tasks are discussed in the report taking into account the situation in the qualification cases that are seen to be linked to the inspections of disposal canisters of spent fuel. (orig.)

  17. Background information for NDT qualification of Finnish disposal canisters of spent fuel

    International Nuclear Information System (INIS)

    Sarkimo, M.; Pitkaenen, J.

    2013-12-01

    This report presents a review to basic concepts, which are applied in the qualification of non-destructive testing (NDT) techniques. The qualification systems developed and used in some countries are briefly described in the beginning of the report. Anyway the report mainly discusses the qualification practices applied in the Finnish nuclear industry. The Finnish Radiation and Nuclear Safety Authority (STUK) in the YVL Guide 3.8 define the Finnish qualification approach applied for the in-service inspections. The principles presented in this document follow the views of the international organisations: Nuclear Regulator Working Group (NRWG) and European Network for Inspection and Qualification (ENIQ). For the practical qualification work a national guideline is established using so called SP-documents that include specific rules and instructions for execution of qualifications in accordance with YVL Guide 3.8 principles. Altogether the Finnish qualification system can be seen very well to follow the European (ENIQ) methodology. The report discusses several qualification terms and documents. Thus the normally necessary tasks and parts of a qualification are described. The qualification can be seen as a project that includes several tasks, which will be performed by different parties. Enough resources and time should be reserved for the planning and control of a qualification project to ensure its fluent progress. Some tasks are discussed in the report taking into account the situation in the qualification cases that are seen to be linked to the inspections of disposal canisters of spent fuel. (orig.)

  18. Towards harmonized qualifications for radiation exposed personnel

    International Nuclear Information System (INIS)

    Briso, Hugo A.

    2008-01-01

    requirements due to the universe of radiation exposed personnel diversifying their specialization by areas, i.e. medical, industrial and research, as much in normal operation as in emergency situations. It also seeks to allow common approaches to enable the educational institutions as well as to assess the qualifications of operator applicants. (author)

  19. Open-Source RTOS Space Qualification: An RTEMS Case Study

    Science.gov (United States)

    Zemerick, Scott

    2017-01-01

    NASA space-qualification of reusable off-the-shelf real-time operating systems (RTOSs) remains elusive due to several factors notably (1) The diverse nature of RTOSs utilized across NASA, (2) No single NASA space-qualification criteria, lack of verification and validation (V&V) analysis, or test beds, and (3) different RTOS heritages, specifically open-source RTOSs and closed vendor-provided RTOSs. As a leader in simulation test beds, the NASA IV&V Program is poised to help jump-start and lead the space-qualification effort of the open source Real-Time Executive for Multiprocessor Systems (RTEMS) RTOS. RTEMS, as a case-study, can be utilized as an example of how to qualify all RTOSs, particularly the reusable non-commercial (open-source) ones that are gaining usage and popularity across NASA. Qualification will improve the overall safety and mission assurance of RTOSs for NASA-agency wide usage. NASA's involvement in space-qualification of an open-source RTOS such as RTEMS will drive the RTOS industry toward a more qualified and mature open-source RTOS product.

  20. Qualification tests for PWR control element drive mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Kim, In Yong; Jin, Choon Eon; Choi Suhn [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1996-01-01

    It is necessary to perform the qualification test for the magnetic jack type CEDM to show the design compatibility because the CEDM is composed of many mechanical and electrical components complicatedly. ABB-CE performed various qualification tests during the development of the System80 CEDM to which Korea Standard Nuclear Plant (KSNP) CEDM referred. The qualification test for the CEDM is classified into the performance test and the dynamic test. The performance test is to verify operability of the CEDM, and the dynamic test is to find dynamic characteristics and to verify the structural integrity if the CEDM for the seismic accidents. Described in this report are the test requirements, the test facilities and the test methods for the performance and the dynamic qualification tests of the PWR magnetic jack type CEDM. The impacts of the design changes in the Korea Next Generation Reactor (KNGR) on the KSNP CEDM were analyzed to present the necessity for the tests. This report also proposes the facilities to perform the tests in KAERI including reasonable schedule for the tests. Attached to this report is the summary of qualification tests of System 80 CEDM performed by ABB-CE. 20 figs., 16 tabs., 21 refs. (Author) .new.

  1. Qualification tests for PWR control element drive mechanism

    International Nuclear Information System (INIS)

    Kim, In Yong; Jin, Choon Eon; Choi Suhn

    1996-01-01

    It is necessary to perform the qualification test for the magnetic jack type CEDM to show the design compatibility because the CEDM is composed of many mechanical and electrical components complicatedly. ABB-CE performed various qualification tests during the development of the System80 CEDM to which Korea Standard Nuclear Plant (KSNP) CEDM referred. The qualification test for the CEDM is classified into the performance test and the dynamic test. The performance test is to verify operability of the CEDM, and the dynamic test is to find dynamic characteristics and to verify the structural integrity if the CEDM for the seismic accidents. Described in this report are the test requirements, the test facilities and the test methods for the performance and the dynamic qualification tests of the PWR magnetic jack type CEDM. The impacts of the design changes in the Korea Next Generation Reactor (KNGR) on the KSNP CEDM were analyzed to present the necessity for the tests. This report also proposes the facilities to perform the tests in KAERI including reasonable schedule for the tests. Attached to this report is the summary of qualification tests of System 80 CEDM performed by ABB-CE. 20 figs., 16 tabs., 21 refs. (Author) .new

  2. Strategy for Qualification of the Plutonium Immobilized Form

    International Nuclear Information System (INIS)

    Marra, J.C.; Marra, S.L.; Bibler, N.E.; Strachan, D.M.; Shaw, H.F.

    1998-01-01

    In order to dispose of a radioactive waste form in a federal high- level waste repository, a waste form qualification strategy and program must be developed. The waste form qualification program must include the acceptance specifications for the product, show how compliance with these specifications will be met, and then demonstrate compliance. An important element of this program is developing a measure to demonstrate product consistency. For the can- in-canister option, waste form qualification is needed not only for the Pu immobilized form but also for the high-level waste glass canister containing the Pu waste form. The latter will require close interaction and coordination with the U.S. Department of Energy - Office of Environmental Management (DOE-EM) who, through their contractor at the Savannah River Site (SRS), is the producer of the high-level waste form at the Defense Waste Processing Facility (DWPF). In this paper a waste form qualification strategy for the plutonium ceramic form is described that utilizes, as much as possible, the qualification strategy successfully used for vitrified high-level waste

  3. Re-qualification of switchgear equipment following field modification

    International Nuclear Information System (INIS)

    Tulk, J.D.; El Bestawi, M.A.

    1984-01-01

    A set of 4.16 kV switchgear was seismically qualified by shaker table test for use in a nuclear power plant. Later, the equipment was modified by the addition of two extra switches and enclosures. This paper describes the methods used to extend the qualification achieved in the original proof test to the new configuration. Qualification of the modified switchgear depended on demonstrating that the intensity of the shaking that would be experienced by equipment mounted in the extended enclosure during a design basis earthquake (DBE) would be no stronger than the shaking that occurred during the original qualification testing. This was accomplished by a combination of analysis and experiment. Natural frequencies and mode-shapes of the original and extended enclosure structures were determined through in-situ modal tests on the equipment. Mathematical models based on the experimental results were then used for dynamic analyses which generated two sets of in-equipment response spectra: one set representing the original qualification test; and one set representing the response of the modified equipment to a hypothetical DBE. Qualification was confirmed by demonstrating that the test-based response spectra for the original configuration exceeded the response spectra developed for the extended structure subjected to DBE level excitation

  4. Measurement of Nonverbal IQ in Autism Spectrum Disorder: Scores in Young Adulthood Compared to Early Childhood

    Science.gov (United States)

    Bishop, Somer L.; Farmer, Cristan; Thurm, Audrey

    2015-01-01

    Nonverbal IQ (NVIQ) was examined in 84 individuals with autism spectrum disorder (ASD) followed from age 2 to 19. Most adults who scored in the range of intellectual disability also received scores below 70 as children, and the majority of adults with scores in the average range had scored in this range by age 3. However, within the lower ranges…

  5. The International Bleeding Risk Score

    DEFF Research Database (Denmark)

    Laursen, Stig Borbjerg; Laine, L.; Dalton, H.

    2017-01-01

    The International Bleeding Risk Score: A New Risk Score that can Accurately Predict Mortality in Patients with Upper GI-Bleeding.......The International Bleeding Risk Score: A New Risk Score that can Accurately Predict Mortality in Patients with Upper GI-Bleeding....

  6. Development and Qualification of ATV Propulsion Assemblies

    Science.gov (United States)

    Riehle, M.; Jost, R.

    2002-01-01

    In the frame of the development and operation of the International Space Station ISS, the European Space Agency ESA is not only contributing experiments and a laboratory module but also logistics capacity. This purpose of supplying the ISS shall be covered by an unmanned, Automated Transfer Vehicle (ATV) that will be launched for the first time in 2004 by Ariane 5. The development of the ATV is in close conjunction to the future Ariane 5 launch capacity of about 20 tons injected into low earth orbit. Thus this unmanned transporter will be a quite large space craft that is subjected to fulfil several mission objectives apart of only delivering cargo such as multiple automatic docking/de-docking, re-boost services and re-fuelling. For those reasons and due to its dimensions the propulsion sub-system is one of the most sophisticated in the field of space propulsion. Even safety issues of manned space flight have to be applied since the pressurised cargo section is part of the ISS when docked to the manned modules. This leads to by far the largest but also the most sophisticated propulsion system ever built in Europe. Astrium as one of the major partners of this european project is responsible for this major system that will be described in the paper. Focusing on the major core assemblies such as multi thruster platforms, pressure control system incl. safety and redundancy mechanisms as well as tanks and other components that completes a propulsion system. System Design and Qualification Starting from the basic criteria the paper will present the major performance requirements such as pressures, thrust levels and other parameters that led to the selection of major components of the system such as thrusters, valves, tanks, etc. Some of the component could be selected from off the shelve, whereas other core components such as the 200N Attitude Control and Braking Thrusters or Propellant Tanks had to be newly developed. The stepwise approach of development and careful

  7. Investigation on legislation necessity of qualification of quality assurance auditors for civilian nuclear components

    International Nuclear Information System (INIS)

    Zhu Hong

    2004-01-01

    The paper discusses the actual state and legislation necessity of administration for qualification of quality assurance auditors engaging in nuclear component activities in our country, and presents the tentative idea for establishing qualification system of quality assurance auditors. (author)

  8. Qualification of box HEPA filters for nuclear applications

    International Nuclear Information System (INIS)

    Bergman, W.; Larsen, G.; Wilson, K.; Rainer, F.

    1995-03-01

    We have successfully completed qualification tests on high efficiency particulate air (HEPA) filters that are encapsulated within a box and manufactured by American Air Filters. The qualification tests are required by the American Society of Mechanical Engineers Standard ASME N509 and the U.S. Military Standard MIL-F-51068 for HEPA filters to be used in nuclear applications. The qualification tests specify minimum filter efficiencies following exposure to heated air, overpressure, and rough handling. Prior to this study, no box HEPA filters from any manufacturer had been qualified despite their wide-spread use in Department of Energy (DOE) facilities. Box HEPA filters are not addressed in any of the existing HEPA standards and only briefly discussed in the Nuclear Air Cleaning Handbook

  9. Nuclear Criticality Safety Organization qualification program. Revision 4

    International Nuclear Information System (INIS)

    Carroll, K.J.; Taylor, R.G.; Worley, C.A.

    1997-01-01

    The Nuclear Criticality Safety Organization (NCSO) is committed to developing and maintaining a staff of highly qualified personnel to meet the current and anticipated needs in Nuclear Criticality Safety (NCS) at the Oak Ridge Y-12 Plant. This document defines the Qualification Program to address the NCSO technical and managerial qualification as required by the Y-12 Training Implementation Matrix (TIM). It is implemented through a combination of LMES plant-wide training courses and professional nuclear criticality safety training provided within the organization. This Qualification Program is applicable to technical and managerial NCSO personnel, including temporary personnel, sub-contractors and/or LMES employees on loan to the NCSO, who perform the NCS tasks or serve NCS-related positions as defined in sections 5 and 6 of this program

  10. Qualifications Frameworks and their conflicting social imaginaries of globalisation

    DEFF Research Database (Denmark)

    Sarauw, Laura Louise

    2013-01-01

    Critics of the European Bologna process often see it as a univocal standardization of higher education. By exploring how different qualifications frameworks currently project unlike imaginaries of and responses to globalisation, this article takes a different stance. As a key point, I argue...... that the well-known imaginary of globalisation as a change towards a more diverse and unforeseeable world, which calls for the development of flexible, lifelong learners with a broad knowledge base and strong democratic competencies that we find in the overarching qualifications framework of the Bologna process......, is a highly contested imaginary. In contrast, for example, the Danish qualifications framework of 2003 projects an imaginary of globalisation as a change towards a smaller and more predictable world, which enables a novel and more efficient alignment of the curriculum towards specific professional needs...

  11. The path from biomarker discovery to regulatory qualification

    CERN Document Server

    Goodsaid, Federico

    2013-01-01

    The Path from Biomarker Discovery to Regulatory Qualification is a unique guide that focuses on biomarker qualification, its history and current regulatory settings in both the US and abroad. This multi-contributed book provides a detailed look at the next step to developing biomarkers for clinical use and covers overall concepts, challenges, strategies and solutions based on the experiences of regulatory authorities and scientists. Members of the regulatory, pharmaceutical and biomarker development communities will benefit the most from using this book-it is a complete and practical guide to biomarker qualification, providing valuable insight to an ever-evolving and important area of regulatory science. For complimentary access to chapter 13, 'Classic' Biomarkers of Liver Injury, by John R. Senior, Associate Director for Science, Food and Drug Administration, Silver Spring, Maryland, USA, please visit the following site:  http://tinyurl.com/ClassicBiomarkers Contains a collection of experiences of different...

  12. Nuclear criticality safety specialist training and qualification programs

    International Nuclear Information System (INIS)

    Hopper, C.M.

    1993-01-01

    Since the beginning of the Nuclear Criticality Safety Division of the American Nuclear Society (ANS) in 1967, the nuclear criticality safety (NCS) community has sought to provide an exchange of information at a national level to facilitate the education and development of NCS specialists. In addition, individual criticality safety organizations within government contractor and licensed commercial nonreactor facilities have developed training and qualification programs for their NCS specialists. However, there has been substantial variability in the content and quality of these program requirements and personnel qualifications, at least as measured within the government contractor community. The purpose of this paper is to provide a brief, general history of staff training and to describe the current direction and focus of US DOE guidance for the content of training and qualification programs designed to develop NCS specialists

  13. Evaluation and qualification of novel control techniques with safety requirements

    International Nuclear Information System (INIS)

    Gossner, S.; Wach, D.

    1985-01-01

    The paper discusses the questions related to the assessment and qualification of new I and C-systems. The tasks of nuclear power plant I and Cs as well as the efficiency of the new techniques are reflected. Problems with application of new I and Cs and the state of application in Germany and abroad are addressed. Starting from the essential differencies between conventional and new I and C-systems it is evaluated, if and in which way existing safety requirements can be met and to what extent new requirements need to be formulated. An overall concept has to be developed comprising the definition of graded requirement profiles for design and qualification. Associated qualification procedures and tools have to be adapted, developed and tuned upon each other. (orig./HP) [de

  14. AGC-3 Experiment Irradiation Monitoring Data Qualification Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Laurence Hull

    2014-10-01

    The Graphite Technology Development Program will run a series of six experiments to quantify the effects of irradiation on nuclear grade graphite. The third experiment, Advanced Graphite Creep 3 (AGC 3), began with Advanced Test Reactor (ATR) Cycle 152B on November 27, 2012, and ended with ATR Cycle 155B on April 23, 2014. This report documents qualification of AGC 3 experiment irradiation monitoring data for use by the Very High Temperature Reactor (VHTR) Technology Development Office (TDO) Program for research and development activities required to design and license the first VHTR nuclear plant. Qualified data meet the requirements for data collection and use as described in the experiment planning and quality assurance documents. Failed data do not meet the requirements. Trend data may not meet the requirements, but may still provide some useable information. All thermocouples (TCs) functioned throughout the AGC 3 experiment. There was one interval between December 18, 2012, and December 20, 2012, where 10 NULL values were reported for various TCs. These NULL values were deleted from the Nuclear Data Management and Analysis System database. All temperature data are Qualified for use by the VHTR TDO Program. Argon, helium, and total gas flow data were within expected ranges and are Qualified for use by the VHTR TDO Program. Total gas flow was approximately 50 sccm through the AGC 3 experiment capsule. Helium gas flow was briefly increased to 100 sccm during ATR shutdowns. At the start of the AGC 3 experiment, moisture in the outflow gas line was stuck at a constant value of 335.6174 ppmv for the first cycle (Cycle 152B). When the AGC 3 experiment capsule was reinstalled in ATR for Cycle 154B, a new moisture filter was installed. Moisture data from Cycle 152B are Failed. All moisture data from the final three cycles (Cycles 154B, 155A, and 155B) are Qualified for use by the VHTR TDO Program.

  15. NPP Krsko full scope simulator verification and qualification

    International Nuclear Information System (INIS)

    Krajnc, B.; Glaser, B.; Novsak, M.; Spiler, J.

    1998-01-01

    NPP Krsko (NEK) will, as a part of the Modernization plan, obtain also Krsko Full Scope Simulator (KFSS). Contract has been awarded to CAE Electronics for the design, construction and integration. KFSS will support in real time, the training for the complete range of operation, which can be performed from the main control room and some selected plant areas (remote shutdown panels, etc). Based on the lessons learned on development of NPP Krsko Basic Principle Simulator we decided for active approach. That means that NPP Krsko personnel will be heavily involved into all phases of KFSS development and testing. Since NPP Krsko is going to replace the existing steam generators, raise the nominal power and perform necessary modifications to support the power uprate, it was decided that the development of the KFSS will be conducted in two steps: 1. Development of the models as well as all the hardware interface in the MCR for the existing plant Cycle 15 and then, 2. Models and hardware will be modified, added or replaced as needed to take into account the steam generator replacement and plant uprate projects. In spite of the fact that the simulator will be used for the training of the plant operators for the uprated conditions and with new steam generators, the upper described approach was selected since we want to be sure that the models will at the beginning adequately simulate the existing plant. For the existing conditions we have available reference data for different plant conditions, as well as data for different plant transients. By verifying that simulator will be able adequately simulate the existing conditions the level of confidence for the uprated simulator will be much higher. This is of special importance since it will support initial training for modernized plant conditions. In this paper the plan for verification and qualification of KFSS as well as the amount of the work needed on NPP Krsko side to develop the test acceptance criteria will be presented.(author)

  16. Qualification of NDT systems for in-service inspections of nuclear power plant pressure vessels

    International Nuclear Information System (INIS)

    Elfving, K.

    1998-11-01

    The goal of this study is to determine the requirements of the in-service inspection qualification in Europe, their feasibility in practice and to find out possible manufacture defects in test pieces used in practical trials. The literature study consists of qualification requirements set by European regulatory bodies and by the European nuclear power utilities. Also a brief summary of qualification requirements set by ASME Code, Section XI and comparison between ASME and European qualification requirements is included

  17. Establishment of an unrelated umbilical cord blood bank qualification program: ensuring quality while meeting Food and Drug Administration vendor qualification requirements.

    Science.gov (United States)

    Rabe, Fran; Kadidlo, Diane; Van Orsow, Lisa; McKenna, David

    2013-10-01

    Qualification of a cord blood bank (CBB) is a complex process that includes evaluation of multiple aspects of donor screening and testing, processing, accreditation and approval by professional cell therapy groups, and results of received cord blood units. The University of Minnesota Medical Center Cell Therapy Laboratory has established a CBB vendor qualification process to ensure the CBB meets established regulatory and quality requirements. The deployed qualification of CBBs is based on retrospective and prospective review of the CBB. Forty-one CBBs were evaluated retrospectively: seven CBBs were disqualified based on failed quality control (QC) results. Eight CBBs did not meet the criteria for retrospective qualification because fewer than 3 cord blood units were received and the CBB was not accredited. As of March 2012, three US and one non-US CBBs have been qualified prospectively. One CBB withdrew from the qualification process after successful completion of the comprehensive survey and subsequent failure of the provided QC unit to pass the minimum criteria. One CBB failed the prospective qualification process based on processing methods that were revealed during the paper portion of the evaluation. A CBB qualification process is necessary for a transplant center to manage the qualification of the large number of CBBs needed to support a umbilical cord blood transplantation program. A transplant center that has utilized cord blood for a number of years before implementation of a qualification process should use a retrospective qualification process along with a prospective process. © 2013 American Association of Blood Banks.

  18. IAEA activities on NPP personnel training and qualification

    International Nuclear Information System (INIS)

    Kossilov, A.

    1998-01-01

    Activities of IAEA concerning training and qualification of NPP personnel consider the availability of sufficient number of competent personnel which is one of the most critical requirements for safe and reliable NPP operation and maintenance. Competence of personnel is essential for reducing the frequency of events connected to human errors and equipment failures. The IAEA Guidebook on Nuclear Power Plant Personnel Training and its Evaluation incorporates the experience gained worldwide and provides recommendations on the use of SAT being the best practice for attaining and maintaining the qualification and competence of NPP personnel and for quality assurance of training

  19. Qualification Test for Korean Mockups of ITER Blanket First Wall

    International Nuclear Information System (INIS)

    Kim, S. K.; Lee, D. W.; Bae, Y. D.; Hong, B. G.; Jung, H. K.; Jung, Y. I.; Park, J. Y.; Jeong, Y. H.; Choi, B. K.; Kim, B. Y.

    2009-01-01

    ITER First Wall (FW) includes the beryllium armor tiles joined to CuCrZr heat sink with stainless steel cooling tubes. This first wall panels are one of the critical components in the ITER machine with the surface heat flux of 0.5 MW/m 2 or above. So qualification program needs to be performed with the goal to qualify the joining technologies required for the ITER First Wall. Based on the results of tests, the acceptance of the developed joining technologies will be established. The results of this qualification test will affect the final selection of the manufacturers for the ITER First Wall

  20. Hanford Waste Vitrification Plant Project Waste Form Qualification Program Plan

    International Nuclear Information System (INIS)

    Randklev, E.H.

    1993-06-01

    The US Department of Energy has created a waste acceptance process to help guide the overall program for the disposal of high-level nuclear waste in a federal repository. This Waste Form Qualification Program Plan describes the hierarchy of strategies used by the Hanford Waste Vitrification Plant Project to satisfy the waste form qualification obligations of that waste acceptance process. A description of the functional relationship of the participants contributing to completing this objective is provided. The major activities, products, providers, and associated scheduling for implementing the strategies also are presented

  1. Fatigue qualification of high thickness composite rotor components

    Science.gov (United States)

    Raggi, M.; Mariani, U.; Zaffaroni, G.

    Fatigue qualification aspects of composite rotor components are presented according with the safe life procedure usually applied by helicopter manufacturers. Test activities are identified at three levels of specimen complexity: coupon, structural element and full scale component. Particular attention is given to high thickness laminates qualification as far as environmental exposure is concerned. A practical approach for an accelerated conditioning procedure is described. The application to a main rotor tension link is presented showing the negligible effect of the moisture absorption on its fatigue strength.

  2. Qualification Procedures of the CMS Pixel Barrel Modules

    CERN Document Server

    Starodumov, A; Horisberger, R.; Kastli, H.Chr.; Kotlinski, D.; Langenegger, U.; Meier, B.; Rohe, T.; Trueb, P.

    2006-01-01

    The CMS pixel barrel system will consist of three layers built of about 800 modules. One module contains 66560 readout channels and the full pixel barrel system about 48 million channels. It is mandatory to test each channel for functionality, noise level, trimming mechanism, and bump bonding quality. Different methods to determine the bump bonding yield with electrical measurements have been developed. Measurements of several operational parameters are also included in the qualification procedure. Among them are pixel noise, gains and pedestals. Test and qualification procedures of the pixel barrel modules are described and some results are presented.

  3. AZ-101 Mixer Pump Test Qualification Test Procedures (QTP)

    International Nuclear Information System (INIS)

    THOMAS, W.K.

    2000-01-01

    Describes the Qualification test procedure for the AZ-101 Mixer Pump Data Acquisition System (DAS). The purpose of this Qualification Test Procedure (QTP) is to confirm that the AZ-101 Mixer Pump System has been properly programmed and hardware configured correctly. This QTP will test the software setpoints for the alarms and also check the wiring configuration from the SIMcart to the HMI. An Acceptance Test Procedure (ATP), similar to this QTP will be performed to test field devices and connections from the field

  4. The ASEAN economic community and medical qualification.

    Science.gov (United States)

    Kittrakulrat, Jathurong; Jongjatuporn, Witthawin; Jurjai, Ravipol; Jarupanich, Nicha; Pongpirul, Krit

    2014-01-01

    In the regional movement toward ASEAN Economic Community (AEC), medical professions including physicians can be qualified to practice medicine in another country. Ensuring comparable, excellent medical qualification systems is crucial but the availability and analysis of relevant information has been lacking. This study had the following aims: 1) to comparatively analyze information on Medical Licensing Examinations (MLE) across ASEAN countries and 2) to assess stakeholders' view on potential consequences of AEC on the medical profession from a Thai perspective. To search for relevant information on MLE, we started with each country's national body as the primary data source. In case of lack of available data, secondary data sources including official websites of medical universities, colleagues in international and national medical student organizations, and some other appropriate Internet sources were used. Feasibility and concerns about validity and reliability of these sources were discussed among investigators. Experts in the region invited through HealthSpace.Asia conducted the final data validation. For the second objective, in-depth interviews were conducted with 13 Thai stakeholders, purposely selected based on a maximum variation sampling technique to represent the points of view of the medical licensing authority, the medical profession, ethicists and economists. MLE systems exist in all ASEAN countries except Brunei, but vary greatly. Although the majority has a national MLE system, Singapore, Indonesia, and Vietnam accept results of MLE conducted at universities. Thailand adopted the USA's 3-step approach that aims to check pre-clinical knowledge, clinical knowledge, and clinical skills. Most countries, however, require only one step. A multiple choice question (MCQ) is the most commonly used method of assessment; a modified essay question (MEQ) is the next most common. Although both tests assess candidate's knowledge, the Objective Structured Clinical

  5. Global National Qualifications Framework Inventory: Country Cases from EU and ETF Partner Countries

    Science.gov (United States)

    Cedefop - European Centre for the Development of Vocational Training, 2013

    2013-01-01

    Certificates, diplomas and titles are commonly known as qualifications. Their purpose is to show employers, training providers, and individuals what the person holding the qualification has learned and can do. Every country issues many different qualifications, but for the European labor market to work as intended--that is for European citizens to…

  6. 78 FR 53025 - Pilot Certification and Qualification Requirements for Air Carrier Operations; Correction

    Science.gov (United States)

    2013-08-28

    ...-0100; Amdt. No. 141-17A] RIN 2120-AJ67 Pilot Certification and Qualification Requirements for Air... regulations to create new certification and qualification requirements for pilots in air carrier operations..., the FAA published a final rule entitled, ``Pilot Certification and Qualification Requirements for Air...

  7. 10 CFR 50.76 - Licensee's change of status; financial qualifications.

    Science.gov (United States)

    2010-01-01

    ... the financial qualifications information that would be required for obtaining an initial operating license as specified in § 50.33(f)(2). The financial qualifications information must address the first... 10 Energy 1 2010-01-01 2010-01-01 false Licensee's change of status; financial qualifications. 50...

  8. 5 CFR 531.212 - Superior qualifications and special needs pay-setting authority.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Superior qualifications and special needs... Appointment Or Position Changes § 531.212 Superior qualifications and special needs pay-setting authority. (a) Agency authority. (1) An agency may use the superior qualifications and special needs pay-setting...

  9. Lower-Level Qualifications as a Stepping Stone for Young People. Occasional Paper

    Science.gov (United States)

    Oliver, Damian

    2012-01-01

    Lower-level qualifications (certificate I and II programs) provide little or no immediate return to the individual in terms of increased wages. However, lower-level qualifications are intended to prepare students who would otherwise not be capable of enrolling in and completing a higher-level qualification or making a successful transition into…

  10. 25 CFR 117.26 - Expenses incurred pending qualification of an executor or administrator.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Expenses incurred pending qualification of an executor or... HAVE CERTIFICATES OF COMPETENCY § 117.26 Expenses incurred pending qualification of an executor or administrator. Pending the qualification of the executor or administrator of the estate of a deceased Indian of...

  11. 49 CFR 214.349 - Training and qualification of watchmen/lookouts.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Training and qualification of watchmen/lookouts...) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAILROAD WORKPLACE SAFETY Roadway Worker Protection § 214.349 Training and qualification of watchmen/lookouts. (a) The training and qualification for...

  12. Forced Attention to Specific Applicant Qualifications: Impact on Physical Attractiveness and Sex of Applicant Biases.

    Science.gov (United States)

    Cann, Arnie; And Others

    1981-01-01

    Undergraduates evaluated the qualifications of an attractive, average, or unattractive male or female applicant. Ratings of specific qualifications preceded or followed an overall and hiring decision rating. The order variable influenced ratings of specific qualifications but not the overall or hiring decision. Male and attractive applicants were…

  13. Qualification of a Method to Calculate the Irrecoverable Pressure Loss in High Reynolds Number Piping Systems

    Energy Technology Data Exchange (ETDEWEB)

    Sigg, K. C.; Coffield, R. D.

    2002-09-01

    High Reynolds number test data has recently been reported for both single and multiple piping elbow design configurations at earlier ASME Fluid Engineering Division conferences. The data of these studies ranged up to a Reynolds number of 42 x 10[sup]6 which is significantly greater than that used to establish design correlations before the data was available. Many of the accepted design correlations, based on the lower Reynolds number data, date back as much as fifty years. The new data shows that these earlier correlations are extremely conservative for high Reynolds number applications. Based on the recent high Reynolds number information a new recommended method has been developed for calculating irrecoverable pressure loses in piping systems for design considerations such as establishing pump sizing requirements. This paper describes the recommended design approach and additional testing that has been performed as part of the qualification of the method. This qualification testing determined the irrecoverable pressure loss of a piping configuration that would typify a limiting piping section in a complicated piping network, i.e., multiple, tightly coupled, out-of-plane elbows in series under high Reynolds number flow conditions. The overall pressure loss measurements were then compared to predictions, which used the new methodology to assure that conservative estimates for the pressure loss (of the type used for pump sizing) were obtained. The recommended design methodology, the qualification testing and the comparison between the predictions and the test data are presented. A major conclusion of this study is that the recommended method for calculating irrecoverable pressure loss in piping systems is conservative yet significantly lower than predicted by early design correlations that were based on the extrapolation of low Reynolds number test data.

  14. Do Test Scores Buy Happiness?

    Science.gov (United States)

    McCluskey, Neal

    2017-01-01

    Since at least the enactment of No Child Left Behind in 2002, standardized test scores have served as the primary measures of public school effectiveness. Yet, such scores fail to measure the ultimate goal of education: maximizing happiness. This exploratory analysis assesses nation level associations between test scores and happiness, controlling…

  15. Decant pump assembly and controls qualification testing - test report

    Energy Technology Data Exchange (ETDEWEB)

    Staehr, T.W., Westinghouse Hanford

    1996-05-02

    This report summarizes the results of the qualification testing of the supernate decant pump and controls system to be used for in-tank sludge washing in aging waste tank AZ-101. The test was successful and all components are qualified for installation and use in the tank.

  16. The Impact of Teacher Qualification and Subject Major in the ...

    African Journals Online (AJOL)

    The findings therefore suggest that the policies adopted by the Ministry of Education concerning qualifications and subject majors of teachers that are employed make important difference in the students academic achievement in mathematics in Lesotho. African Journal of Cross-Cultural psychology and sport facilitation ...

  17. 47 CFR 73.4101 - Financial qualifications, TV stations.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Financial qualifications, TV stations. 73.4101 Section 73.4101 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES..., TV stations. See Public Notice, FCC 79-299, dated May 11, 1979. 72 F.C.C. 2d 784; 44 FR 29160, May 18...

  18. The qualification of electrical components and instrumentations relevant to safety

    International Nuclear Information System (INIS)

    Zambardi, F.

    1989-03-01

    Systems and components relevant to safety of nuclear power plants must maintain their functional integrity in order to assure accident prevention and mitigation. Redundancy is utilized against random failures, nevertheless care must be taken to avoid common failures in redundant components. Main sources of degradation and common cause failures consist in the aging effects and in the changes of environmental conditions which occur during the plant life and the postulated accidents. These causes of degradation are expected to be especially significant for instrumentation and electrical equipment, which can have a primary role in safety systems. The qualification is the methodology by which component safety requirements can be met against the above mentioned causes of degradation. In this report the connection between the possible, plant conditions and the resulting degradation effects on components is preliminarily addressed. A general characterization of the qualification is then presented. Basis, methods and peculiar aspects are discussed and the qualification by testing is taken into special account. Technical and organizational aspects related to a plant qualification program are also focused. The report ends with a look to the most significant research and development activities. (author)

  19. 10 CFR 26.85 - Collector qualifications and responsibilities.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Collector qualifications and responsibilities. 26.85 Section 26.85 Energy NUCLEAR REGULATORY COMMISSION FITNESS FOR DUTY PROGRAMS Collecting Specimens for... reports, if any; results of tests to establish employee competency for the position he or she holds...

  20. 38 CFR 1.601 - Qualifications for access.

    Science.gov (United States)

    2010-07-01

    ...) An applicant for read-only access to VBA automated claims records from a location other than a VA... utilized to obtain access, as well as their location, must be approved in advance by VBA. (c) Each... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Qualifications for access...

  1. The IB Diploma and UK University Degree Qualifications

    Science.gov (United States)

    Frank-Gemmill, Gerda

    2013-01-01

    In recent years the International Baccalaureate (IB) Diploma has become widely accepted as a university-entry qualification in the UK, but there has been little quantitative research into the achievements of IB students at degree level. This study investigates IB students from one selective independent school who entered UK universities between…

  2. Teacher Qualification Guidelines, Ecological Literacy and Outdoor Education

    Science.gov (United States)

    Martin, Peter

    2008-01-01

    A key signpost to a profession is clarity of disciplinary knowledge. In this paper I describe the content and outcome of a process to refine the qualification guidelines for outdoor education teachers in Victorian, Australia. The guidelines, developed for the Victorian Institute of Teaching, include both practical skills and disciplinary…

  3. 78 FR 62935 - Qualification of Drivers; Exemption Applications; Vision

    Science.gov (United States)

    2013-10-22

    ..., his optometrist noted, ``Mr. Smith, despite having a prosthetic left eye, has fully functional vision...-0166] Qualification of Drivers; Exemption Applications; Vision AGENCY: Federal Motor Carrier Safety... announces receipt of applications from 26 individuals for exemption from the vision requirement in the...

  4. International Harmonization of Training and Qualification in the Manufacturing Industry

    Science.gov (United States)

    Quintino, L.; Fernandes, I.; Miranda, R. M.

    2011-01-01

    Purpose: The aim of this paper is to propose a model for international harmonization of the training and qualification of human resources for industrial professions. The outcome is a system based on training guidelines and a quality assurance methodology that is now in use in 42 countries around the world. Design/methodology/approach: The paper…

  5. Shaking table qualification tests of mechanical and electrical components

    International Nuclear Information System (INIS)

    Jurukovski, D.

    1993-01-01

    This presentation covers the experience of the Institute of Earthquake Engineering and Engineering Seismology, Skopje, Republic of Macedonia in seismic qualification of mechanical components by shaking table testing. The characteristics of the biaxial seismic and single component shaking tables used at the Institute are given. Some examples of the experience from performed test for reactor components are included

  6. 18 CFR 41.12 - Qualifications of accountants.

    Science.gov (United States)

    2010-04-01

    ... Regulations § 41.12 Qualifications of accountants. The Commission will not recognize any certified public accountant or public accountant through December 31, 1975, who is not in fact independent. Beginning January... accountants, or independent licensed public accountants who were licensed on or before December 31, 1970, who...

  7. 42 CFR 493.1469 - Standard: Cytology general supervisor qualifications.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Standard: Cytology general supervisor... Nonwaived Testing Laboratories Performing High Complexity Testing § 493.1469 Standard: Cytology general supervisor qualifications. The cytology general supervisor must be qualified to supervise cytology services...

  8. 48 CFR 53.301-330 - Architect-Engineer Qualifications.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Architect-Engineer Qualifications. 53.301-330 Section 53.301-330 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION (CONTINUED) CLAUSES AND FORMS FORMS Illustrations of Forms 53.301-330 Architect-Engineer...

  9. Impact of Qualification Framework in United Arab Emirates: A case ...

    African Journals Online (AJOL)

    2018-02-10

    Feb 10, 2018 ... education, Quality assurance, Competencies. This is an Open ... level, e.g., level 7 for a Bachelor's degree, level 9 for Master's, and level 10 for ... Master of Pharmacy (MPharm) curricula through several stages. .... with economic and social development .... 10] Available from: http://www.qualifications.ae/pdf/.

  10. Assessment Rocks? The Assessment of Group Composing for Qualification

    Science.gov (United States)

    Thorpe, Vicki

    2012-01-01

    Ensembles such as rock and pop bands are places of exciting creativity and intense, enjoyable music making for young people. A recent review of New Zealand's secondary school qualification, the National Certificates of Educational Achievement (NCEA), has resulted in a new composition assessment of individuals' achievement in groups. An analysis of…

  11. 21 CFR 111.12 - What personnel qualification requirements apply?

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false What personnel qualification requirements apply? 111.12 Section 111.12 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION CURRENT GOOD MANUFACTURING PRACTICE IN MANUFACTURING...

  12. Sustained qualification process for full scope nuclear power plant simulators

    International Nuclear Information System (INIS)

    Pirson, J.; Stubbe, E.; Vanhoenacker, L.

    1994-01-01

    In the past decade, simulator training for all nuclear power plant operators has evolved into a vital requirement. To assure a correct training, the simulator qualification process is an important issue not only for the initial validation but also following major simulator updates, which are necessary during the lifetime of the simulator. In order to avoid degradation of the simulator validated software, the modifications have to be introduced according to a rigorous methodology and a practical requalification process has to be applied. Such methodology has to be enforced at every phase of the simulator construction or updating process from plant data package constitution, over simulator software development to simulator response qualification. The initial qualification and requalification process is based on the 3 levels identified by the ANSI/ANS 3-5 standard for steady-state, operational transients and accident conditions. For the initial certification of the full scope simulators in Belgium, a practical qualification methodology has been applied, which has been adapted into a set of non regression tests for the requalification after major simulator updates. (orig.) (4 refs., 3 figs.)

  13. Biomarkers as drug development tools: discovery, validation, qualification and use.

    Science.gov (United States)

    Kraus, Virginia B

    2018-06-01

    The 21st Century Cures Act, approved in the USA in December 2016, has encouraged the establishment of the national Precision Medicine Initiative and the augmentation of efforts to address disease prevention, diagnosis and treatment on the basis of a molecular understanding of disease. The Act adopts into law the formal process, developed by the FDA, of qualification of drug development tools, including biomarkers and clinical outcome assessments, to increase the efficiency of clinical trials and encourage an era of molecular medicine. The FDA and European Medicines Agency (EMA) have developed similar processes for the qualification of biomarkers intended for use as companion diagnostics or for development and regulatory approval of a drug or therapeutic. Biomarkers that are used exclusively for the diagnosis, monitoring or stratification of patients in clinical trials are not subject to regulatory approval, although their qualification can facilitate the conduct of a trial. In this Review, the salient features of biomarker discovery, analytical validation, clinical qualification and utilization are described in order to provide an understanding of the process of biomarker development and, through this understanding, convey an appreciation of their potential advantages and limitations.

  14. Qualification tests of materials for spallation neutron sources

    International Nuclear Information System (INIS)

    Sommer, W.F.; Maloy, S.; Wechsler, M.S.

    1997-01-01

    Several laboratories will take part in an extensive materials qualification program that includes irradiation in the proton beam and neutron field available at the Los Alamos Spallation Radiation Damage Facility (LASREF). A number of candidate materials will be exposed to prototypic spallation producing particle radiation. Studies of corrosion-related phenomena and the mitigation of these effects will also be accomplished

  15. 75 FR 1449 - Qualification of Drivers; Exemption Applications; Diabetes

    Science.gov (United States)

    2010-01-11

    ...-2009-0289] Qualification of Drivers; Exemption Applications; Diabetes AGENCY: Federal Motor Carrier... decision to exempt forty-one individuals from its rule prohibiting persons with insulin-treated diabetes... notice of receipt of Federal diabetes exemption applications from forty-one individuals and requested...

  16. 49 CFR 398.3 - Qualifications of drivers or operators.

    Science.gov (United States)

    2010-10-01

    ... possesses the following minimum qualifications: (1) No loss of foot, leg, hand or arm, (2) No mental..., impairment of use of foot, leg, fingers, hand or arm, or other structural defect or limitation, likely to... CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS...

  17. Student Mobility, Qualifications and Academic Recognition in the EU

    Science.gov (United States)

    West, Anne; Barham, Eleanor

    2009-01-01

    This paper explores the relationship between student mobility, qualifications and academic recognition within Europe. It provides an outline of supranational legal instruments and policies in relation to academic recognition and student mobility. It then examines some of the difficulties associated with the different concepts underpinning the…

  18. 78 FR 65034 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-10-30

    ...-0190] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier... against persons with insulin- treated diabetes mellitus (ITDM) operating commercial motor vehicles (CMVs... individuals listed in this notice have recently requested such an exemption from the diabetes prohibition in...

  19. 78 FR 65031 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-10-30

    ...-2013-0182] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... its decision to exempt 19 individuals from its rule prohibiting persons with insulin-treated diabetes... receipt of Federal diabetes exemption applications from 19 individuals and requested comments from the...

  20. 78 FR 76398 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-12-17

    ...-2013-0188] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... its decision to exempt 29 individuals from its rule prohibiting persons with insulin-treated diabetes... receipt of Federal diabetes exemption applications from 29 individuals and requested comments from the...

  1. 78 FR 65754 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-11-01

    ...-2013-0183] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor...-treated diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce... a notice of receipt of Federal diabetes exemption applications from 23 individuals and requested...

  2. 78 FR 7855 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-02-04

    ...-2012-0349] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... its decision to exempt 12 individuals from its rule prohibiting persons with insulin-treated diabetes... receipt of Federal diabetes exemption applications from 12 individuals and requested comments from the...

  3. 78 FR 76400 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-12-17

    ...-2013-0189] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor...-treated diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce... a notice of receipt of Federal diabetes exemption applications from 15 individuals and requested...

  4. 78 FR 77784 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-12-24

    ...-2013-0184] [4910-EX-P] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY...-treated diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce... a notice of receipt of Federal diabetes exemption applications from 26 individuals and requested...

  5. 78 FR 56988 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-09-16

    ...-0186] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier... against persons with insulin-treated diabetes mellitus (ITDM) operating commercial motor vehicles (CMVs... individuals listed in this notice have recently requested such an exemption from the diabetes prohibition in...

  6. 78 FR 60014 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-09-30

    ...-2013-0020] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... its decision to exempt 16 individuals from its rule prohibiting persons with insulin-treated diabetes... of Federal diabetes exemption applications from 16 individuals and requested comments from the public...

  7. 78 FR 64267 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-10-28

    ...-0184] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier... against persons with insulin- treated diabetes mellitus (ITDM) operating commercial motor vehicles (CMVs... such an exemption from the diabetes prohibition in 49 CFR 391.41(b)(3), which applies to drivers of...

  8. 76 FR 9867 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2011-02-22

    ...-2010-0427] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce. The....pdf . Background On January 10, 2011, FMCSA published a notice of receipt of Federal diabetes...

  9. 78 FR 50140 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-08-16

    ...-2013-0019] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... its decision to exempt 24 individuals from its rule prohibiting persons with insulin-treated diabetes... of Federal diabetes exemption applications from 24 individuals and requested comments from the public...

  10. 78 FR 1926 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-01-09

    ...-2012-0347] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... its decision to exempt 12 individuals from its rule prohibiting persons with insulin-treated diabetes....pdf . Background On October 31, 2012, FMCSA published a notice of receipt of Federal diabetes...

  11. 78 FR 76397 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-12-17

    ...-2013-0187] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... its decision to exempt 16 individuals from its rule prohibiting persons with insulin-treated diabetes... receipt of Federal diabetes exemption applications from 16 individuals and requested comments from the...

  12. 78 FR 78479 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-12-26

    ...-0192] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier... insulin- treated diabetes mellitus (ITDM) operating commercial motor vehicles (CMVs) in interstate... diabetes prohibition in 49 CFR 391.41(b)(3), which applies to drivers of CMVs in interstate commerce...

  13. Teacher qualification and teaching techniques in nursery schools in ...

    African Journals Online (AJOL)

    The scarcity of qualified teachers in Early Childhood Education in Rwanda in general, and in Kicukiro District in particular, raised interest and curiosity to conduct this study. Its main purpose was to examine the relationship between the qualification of teachers and their teaching techniques in preschools in Kicukiro District.

  14. 75 FR 60862 - Qualification of Drivers; Exemption Renewals; Vision

    Science.gov (United States)

    2010-10-01

    ...-2006-24015; FMCA- 2008-0106; FMCSA-2008-0174] Qualification of Drivers; Exemption Renewals; Vision.... SUMMARY: FMCSA previously announced its decision to renew the exemptions from the vision requirement in... exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The...

  15. 78 FR 1919 - Qualification of Drivers; Exemption Applications; Vision

    Science.gov (United States)

    2013-01-09

    ...-0339] Qualification of Drivers; Exemption Applications; Vision AGENCY: Federal Motor Carrier Safety... announces receipt of applications from 14 individuals for exemption from the vision requirement in the Federal Motor Carrier Safety Regulations. They are unable to meet the vision requirement in one eye for...

  16. Expanding the Frontiers of National Qualifications Frameworks through Lifelong Learning

    Science.gov (United States)

    Owusu-Agyeman, Yaw

    2017-01-01

    The adoption of a national qualifications framework (NQF) by some governments in all world regions has shown some success in the area of formal learning. However, while NQFs continue to enhance "formal" learning in many countries, the same cannot be said for the recognition, validation and accreditation (RVA) of "non-formal"…

  17. 31 CFR 317.5 - Termination of qualification.

    Science.gov (United States)

    2010-07-01

    ... of the Treasury or a delegate may terminate the qualification of an issuing agent at any time, upon... accounting for the balance of savings bond stock for which it is charged, based on the records of the... remaining bonds included in its accountability. (b) At request of issuing agent. A designated Federal...

  18. 78 FR 41975 - Qualification of Drivers; Exemption Applications; Vision

    Science.gov (United States)

    2013-07-12

    .... Qualifications of Applicants Steven L. Albert Mr. Albert, age 46, has had aphakia in his right eye since 1991. The visual acuity in his right eye is 20/200, and in his left eye, 20/ 20. Following an examination in... shows two crashes for which he was cited and no additional convictions for moving violations in a CMV...

  19. 31 CFR 321.5 - Termination of qualification.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Termination of qualification. 321.5 Section 321.5 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL... of a paying agent upon its written request, provided the agent renders a final accounting for all...

  20. 76 FR 44650 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2011-07-26

    ...-2011-0143] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce. The... complying with the current regulation 49 CFR 391.41(b)(3). Diabetes Mellitus and Driving Experience of the...

  1. 76 FR 53707 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2011-08-29

    ...-2011-0145] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce. The... complying with the current regulation 49 CFR 391.41(b)(3). Diabetes Mellitus and Driving Experience of the...

  2. 77 FR 25227 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-04-27

    ...-2011-0383] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce. The... the current regulation 49 CFR 391.41(b)(3). Diabetes Mellitus and Driving Experience of the Applicants...

  3. 78 FR 50486 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-08-19

    ...-0182] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier... individuals for exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM... revision must provide for individual assessment of drivers with diabetes mellitus, and be consistent with...

  4. 76 FR 79756 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2011-12-22

    ...-0326] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier... individuals for exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM...).\\1\\ The revision must provide for individual assessment of drivers with diabetes mellitus, and be...

  5. 78 FR 37273 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-06-20

    ...-2013-0016] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... achieved by complying with the current regulation 49 CFR 391.41(b)(3). Diabetes Mellitus and Driving... mellitus currently requiring insulin for control'' (49 CFR 391.41(b)(3)). FMCSA established its diabetes...

  6. 77 FR 75493 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-12-20

    ...-2012-0282] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... complying with the current regulation 49 CFR 391.41(b)(3). Diabetes Mellitus and Driving Experience of the... person has no established medical history or clinical diagnosis of diabetes mellitus currently requiring...

  7. 77 FR 532 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-01-05

    ...-2011-0300] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce. The... included in this notice. Diabetes Mellitus and Driving Experience of the Applicants The Agency established...

  8. 78 FR 26422 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-05-06

    ...-2013-0012] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... achieved by complying with the current regulation 49 CFR 391.41(b)(3). Diabetes Mellitus and Driving... mellitus currently requiring insulin for control'' (49 CFR 391.41(b)(3)). FMCSA established its diabetes...

  9. 77 FR 65929 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-10-31

    ...-2012-0219] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... complying with the current regulation 49 CFR 391.41(b)(3). Diabetes Mellitus and Driving Experience of the... person has no established medical history or clinical diagnosis of diabetes mellitus currently requiring...

  10. 77 FR 48587 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-08-14

    ...-0217] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier... individuals for exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM... drivers with diabetes mellitus, and be consistent with the criteria described in section 4018 of the...

  11. 77 FR 70529 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-11-26

    ...-2012-0281] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... complying with the current regulation 49 CFR 391.41(b)(3). Diabetes Mellitus and Driving Experience of the... person has no established medical history or clinical diagnosis of diabetes mellitus currently requiring...

  12. 77 FR 75492 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-12-20

    ...-2012-0283] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... the current regulation 49 CFR 391.41(b)(3). Diabetes Mellitus and Driving Experience of the Applicants... person has no established medical history or clinical diagnosis of diabetes mellitus currently requiring...

  13. 77 FR 38383 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-06-27

    ...-2012-0107] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... current regulation 49 CFR 391.41(b)(3). Diabetes Mellitus and Driving Experience of the Applicants The... person has no established medical history or clinical diagnosis of diabetes mellitus currently requiring...

  14. 78 FR 35088 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-06-11

    ...-2013-0015] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... would be achieved by complying with the current regulation 49 CFR 391.41(b)(3). Diabetes Mellitus and... of diabetes mellitus currently requiring insulin for control'' (49 CFR 391.41(b)(3)). FMCSA...

  15. 77 FR 59447 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-09-27

    ...-0281] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier... individuals for exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM... drivers with diabetes mellitus, and be consistent with the criteria described in section 4018 of the...

  16. 77 FR 64585 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-10-22

    ...-2012-0218] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... current regulation 49 CFR 391.41(b)(3). Diabetes Mellitus and Driving Experience of the Applicants The... person has no established medical history or clinical diagnosis of diabetes mellitus currently requiring...

  17. 78 FR 50482 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-08-19

    ...-0183] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier... individuals for exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM... revision must provide for individual assessment of drivers with diabetes mellitus, and be consistent with...

  18. 77 FR 46791 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-08-06

    ...-2012-0162] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... complying with the current regulation 49 CFR 391.41(b)(3). Diabetes Mellitus and Driving Experience of the... person has no established medical history or clinical diagnosis of diabetes mellitus currently requiring...

  19. 78 FR 5559 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-01-25

    ...-2012-0348] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... complying with the current regulation 49 CFR 391.41(b)(3). Diabetes Mellitus and Driving Experience of the... person has no established medical history or clinical diagnosis of diabetes mellitus currently requiring...

  20. 78 FR 39825 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-07-02

    ...-2013-0018] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... diagnosis of diabetes mellitus currently requiring insulin for control'' [49 CFR 391.41(b)(3)]. FMCSA... Congress on the Feasibility of a Program to Qualify Individuals with Insulin-Treated Diabetes Mellitus to...

  1. 76 FR 79759 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2011-12-22

    ...-2011-0278] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce. The... complying with the current regulation 49 CFR 391.41(b)(3). Diabetes Mellitus and Driving Experience of the...

  2. 77 FR 18302 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-03-27

    ...-0043] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier... individuals for exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM... for individual assessment of drivers with diabetes mellitus, and be consistent with the criteria...

  3. 77 FR 33264 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-06-05

    ...-2012-0044] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... complying with the current regulation 49 CFR 391.41(b)(3). Diabetes Mellitus and Driving Experience of the... person has no established medical history or clinical diagnosis of diabetes mellitus currently requiring...

  4. 77 FR 59450 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-09-27

    ...-2012-0164] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... current regulation 49 CFR 391.41(b)(3). Diabetes Mellitus and Driving Experience of the Applicants The... person has no established medical history or clinical diagnosis of diabetes mellitus currently requiring...

  5. 77 FR 17111 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-03-23

    ...-0042] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor Carrier... individuals for exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM... revision must provide for individual assessment of drivers with diabetes mellitus, and be consistent with...

  6. 76 FR 61139 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2011-10-03

    ...-2011-0192] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce. The... complying with the current regulation 49 CFR 391.41(b)(3). Diabetes Mellitus and Driving Experience of the...

  7. 77 FR 29446 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-05-17

    ...-2012-0043] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... current regulation 49 CFR 391.41(b)(3). Diabetes Mellitus and Driving Experience of the Applicants The... vehicle if that person has no established medical history or clinical diagnosis of diabetes mellitus...

  8. 78 FR 37272 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-06-20

    ...-2013-0017] Qualification of Drivers; Exemption Applications; Diabetes Mellitus AGENCY: Federal Motor... achieved by complying with the current regulation 49 CFR 391.41(b)(3). Diabetes Mellitus and Driving... mellitus currently requiring insulin for control'' (49 CFR 391.41(b)(3)). FMCSA established its diabetes...

  9. 77 FR 63411 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2012-10-16

    ... safety mandated by the statutes. Qualifications of Applicants Darrell G. Brave Mr. Brave, age 61, has had... operator's license from Minnesota. Dennis R. Johnson Mr. Johnson, 58, has had ITDM since 2009. His... hypoglycemic episodes in the last 5 years. His endocrinologist certifies that Mr. Johnson understands diabetes...

  10. 11 CFR 7.27 - Hearing examiner designation and qualifications.

    Science.gov (United States)

    2010-01-01

    ... complaint. (2) The examiner shall be an attorney at the Assistant General Counsel level or higher. ... 11 Federal Elections 1 2010-01-01 2010-01-01 false Hearing examiner designation and qualifications. 7.27 Section 7.27 Federal Elections FEDERAL ELECTION COMMISSION STANDARDS OF CONDUCT Post Employment...

  11. 78 FR 29431 - Qualification of Drivers; Exemption Applications; Vision

    Science.gov (United States)

    2013-05-20

    ..., driving in congested urban areas exposes the driver to more pedestrian and vehicular traffic than exists... qualification file if he/she is self-employed. The driver must have a copy of the certification when driving... your comments, please include a self-addressed, stamped envelope or postcard or print the...

  12. 78 FR 37274 - Qualification of Drivers; Exemption Applications; Vision

    Science.gov (United States)

    2013-06-20

    ..., driving in congested urban areas exposes the driver to more pedestrian and vehicular traffic than exists... qualification file if he/she is self-employed. The driver must have a copy of the certification when driving... that we received your comments, please include a self-addressed, stamped envelope or postcard or print...

  13. 78 FR 34141 - Qualification of Drivers; Exemption Applications; Vision

    Science.gov (United States)

    2013-06-06

    .... Moreover, driving in congested urban areas exposes the driver to more pedestrian and vehicular traffic than... qualification file if he/she is self-employed. The driver must have a copy of the certification when driving... your comments, please include a self-addressed, stamped envelope or postcard or print the...

  14. 77 FR 31427 - Qualification of Drivers; Exemption Applications; Vision

    Science.gov (United States)

    2012-05-25

    .... Moreover, driving in congested urban areas exposes the driver to more pedestrian and vehicular traffic than... qualification file if he/she is self-employed. The driver must have a copy of the certification when driving... that we received your comments, please include a self-addressed, stamped envelope or postcard or print...

  15. 78 FR 41188 - Qualification of Drivers; Exemption Applications; Vision

    Science.gov (United States)

    2013-07-09

    ..., driving in congested urban areas exposes the driver to more pedestrian and vehicular traffic than exists... qualification file if he/she is self-employed. The driver must have a copy of the certification when driving... your comments, please include a self-addressed, stamped envelope or postcard or print the...

  16. 77 FR 71669 - Qualification of Drivers; Exemption Applications; Vision

    Science.gov (United States)

    2012-12-03

    .... Moreover, driving in congested urban areas exposes the driver to more pedestrian and vehicular traffic than... qualification file if he/she is self-employed. The driver must have a copy of the certification when driving... that we received your comments, please include a self-addressed, stamped envelope or postcard or print...

  17. 77 FR 44708 - Qualification of Drivers; Exemption Applications; Vision

    Science.gov (United States)

    2012-07-30

    .... Moreover, driving in congested urban areas exposes the driver to more pedestrian and vehicular traffic than... qualification file if he/she is self-employed. The driver must have a copy of the certification when driving... that we received your comments, please include a self-addressed, stamped envelope or postcard or print...

  18. 78 FR 56986 - Qualification of Drivers; Exemption Applications; Vision

    Science.gov (United States)

    2013-09-16

    .... Moreover, driving in congested urban areas exposes the driver to more pedestrian and vehicular traffic than... qualification file if he/she is self-employed. The driver must have a copy of the certification when driving... that we received your comments, please include a self-addressed, stamped envelope or postcard or print...

  19. 77 FR 10608 - Qualification of Drivers; Exemption Applications; Vision

    Science.gov (United States)

    2012-02-22

    .... Moreover, driving in congested urban areas exposes the driver to more pedestrian and vehicular traffic than... qualification file if he/she is self-employed. The driver must have a copy of the certification when driving... you want acknowledgement that we received your comments, please include a self-addressed, stamped...

  20. 77 FR 33558 - Qualification of Drivers; Exemption Applications; Vision

    Science.gov (United States)

    2012-06-06

    ..., driving in congested urban areas exposes the driver to more pedestrian and vehicular traffic than exists... qualification file if he/she is self-employed. The driver must have a copy of the certification when driving... that we received your comments, please include a self-addressed, stamped envelope or postcard or print...

  1. 78 FR 16758 - Qualification of Drivers; Exemption Applications; Diabetes Mellitus

    Science.gov (United States)

    2013-03-18

    ... comment, if submitted on behalf of an association, business, labor union, etc.). You may review DOT's... statutes. Qualifications of Applicants Mick E. Brand Mr. Brand, 48, has had ITDM since 2011. His... hypoglycemic episodes in the last 5 years. His endocrinologist certifies that Mr. Brand understands diabetes...

  2. Preschool Teacher Candidates' Research Qualifications and Anxiety Level towards Research

    Science.gov (United States)

    Konokman, Gamze Yavuz; Yelken, Tugba; Yokus, Gürol

    2015-01-01

    Problem Statement: Acquisition of research qualifications are one of the most demanded learning outcomes of education faculties. There is great emphasis on building a research identity by developing the skills of students in the department of education faculties. However, very few surveys analyze the current situation of university students in the…

  3. Predicting occupational personality test scores.

    Science.gov (United States)

    Furnham, A; Drakeley, R

    2000-01-01

    The relationship between students' actual test scores and their self-estimated scores on the Hogan Personality Inventory (HPI; R. Hogan & J. Hogan, 1992), an omnibus personality questionnaire, was examined. Despite being given descriptive statistics and explanations of each of the dimensions measured, the students tended to overestimate their scores; yet all correlations between actual and estimated scores were positive and significant. Correlations between self-estimates and actual test scores were highest for sociability, ambition, and adjustment (r = .62 to r = .67). The results are discussed in terms of employers' use and abuse of personality assessment for job recruitment.

  4. Qualification of flat welding of nuclear fuel bars

    International Nuclear Information System (INIS)

    Romero C, J.; Rivera M, H.

    2001-01-01

    The qualification of flat welding consists in the process (procedures (11), instructions (5), specifications (4) and programs (3)) and equipment (systems (4), equipment (6)) with the Personal Qualification (operators and supervisors) that was done in simultaneous form and supported with test and training programs with its respective technical reports, liberated by the Quality Assurance Office of ININ. Moreover, specific procedures of process and personal qualification are realized with the respective supervision by Quality Assurance Office. For the process, 20 welding were realized as follow: 5 welding with maximum contributing of heat, 10 welding with nominal contributing of heat, 5 welding with minimum contributing of heat. The heat contributing for the qualification was done maximum, of increasing the welding current, diminishing the helium flux and the revolutions per minute of the bar, at the moment of welding, with respect to nominal values. In the minimum contributing of heat it is diminished the welding current, increasing the helium flux and the revolutions per minute of the bar with respect to nominal values. With the qualification it has been finished the development of flat welding with results which define an own method of ININ. It was implemented a pneumatic system, for the elimination of micron cracks. It was required a control of turn velocity of the bar of hundredth of revolution. Moreover the main welding parameters each 40 μs are acquired. Also it was automated completely the process to avoid possible human mistakes. The standard deviations of the values of the realized inspections in the quality, are lower. Process, equipment and personnel with their respective Quality reports and registries are qualified, as well as the Quality certificates of two operators and one supervisor. (Author)

  5. Differences of wells scores accuracy, caprini scores and padua scores in deep vein thrombosis diagnosis

    Science.gov (United States)

    Gatot, D.; Mardia, A. I.

    2018-03-01

    Deep Vein Thrombosis (DVT) is the venous thrombus in lower limbs. Diagnosis is by using venography or ultrasound compression. However, these examinations are not available yet in some health facilities. Therefore many scoring systems are developed for the diagnosis of DVT. The scoring method is practical and safe to use in addition to efficacy, and effectiveness in terms of treatment and costs. The existing scoring systems are wells, caprini and padua score. There have been many studies comparing the accuracy of this score but not in Medan. Therefore, we are interested in comparative research of wells, capriniand padua score in Medan.An observational, analytical, case-control study was conducted to perform diagnostic tests on the wells, caprini and padua score to predict the risk of DVT. The study was at H. Adam Malik Hospital in Medan.From a total of 72 subjects, 39 people (54.2%) are men and the mean age are 53.14 years. Wells score, caprini score and padua score has a sensitivity of 80.6%; 61.1%, 50% respectively; specificity of 80.65; 66.7%; 75% respectively, and accuracy of 87.5%; 64.3%; 65.7% respectively.Wells score has better sensitivity, specificity and accuracy than caprini and padua score in diagnosing DVT.

  6. Effluent Management Facility Evaporator Bottom-Waste Streams Formulation and Waste Form Qualification Testing

    Energy Technology Data Exchange (ETDEWEB)

    Saslow, Sarah A.; Um, Wooyong; Russell, Renee L.

    2017-08-02

    This report describes the results from grout formulation and cementitious waste form qualification testing performed by Pacific Northwest National Laboratory (PNNL) for Washington River Protection Solutions, LLC (WRPS). These results are part of a screening test that investigates three grout formulations proposed for wide-range treatment of different waste stream compositions expected for the Hanford Effluent Management Facility (EMF) evaporator bottom waste. This work supports the technical development need for alternative disposition paths for the EMF evaporator bottom wastes and future direct feed low-activity waste (DFLAW) operations at the Hanford Site. High-priority activities included simulant production, grout formulation, and cementitious waste form qualification testing. The work contained within this report relates to waste form development and testing, and does not directly support the 2017 Integrated Disposal Facility (IDF) performance assessment (PA). However, this work contains valuable information for use in PA maintenance past FY 2017 and future waste form development efforts. The provided results and data should be used by (1) cementitious waste form scientists to further the understanding of cementitious leach behavior of contaminants of concern (COCs), (2) decision makers interested in off-site waste form disposal, and (3) the U.S. Department of Energy, their Hanford Site contractors and stakeholders as they assess the IDF PA program at the Hanford Site. The results reported help fill existing data gaps, support final selection of a cementitious waste form for the EMF evaporator bottom waste, and improve the technical defensibility of long-term waste form risk estimates.

  7. NFC based Inspection and Qualification Management (NIQM) System Preventing Counterfeit and Fraudulent Item

    International Nuclear Information System (INIS)

    Chang, Choong Koo; Kim, Young Joo

    2013-01-01

    Design, manufacturing, fabrication, transportation and installation of the devices and equipment for nuclear power plants shall be conducted under the thorough quality assurance program for the nuclear safety. However, from late in the 1980s, NRC began to issue a number of communications alerting licenses to issues involving counterfeit and fraudulent items. A number of incidents identified by the NRC in the 1980s and 1990s catalyzed the US nuclear industry to adopt standard precautions to guard against counterfeit items. The purpose of this paper is to develop the NFC (Near Field Communication) based Inspection and Qualification Management(NIQM) system preventing counterfeit and fraudulent items. NFC is one of the latest wireless communication technologies. As a short-range wireless connectivity technology, NFC offers safe-yet simple and intuitive-communication between electronic devices. As described above, NFC technology can be applied to the inspection and qualification management system very effectively to prevent counterfeit and fraudulent items. In addition, NIQM system can use existing data and information through the interface with legacy system

  8. NFC based Inspection and Qualification Management (NIQM) System Preventing Counterfeit and Fraudulent Item

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Choong Koo; Kim, Young Joo [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2013-10-15

    Design, manufacturing, fabrication, transportation and installation of the devices and equipment for nuclear power plants shall be conducted under the thorough quality assurance program for the nuclear safety. However, from late in the 1980s, NRC began to issue a number of communications alerting licenses to issues involving counterfeit and fraudulent items. A number of incidents identified by the NRC in the 1980s and 1990s catalyzed the US nuclear industry to adopt standard precautions to guard against counterfeit items. The purpose of this paper is to develop the NFC (Near Field Communication) based Inspection and Qualification Management(NIQM) system preventing counterfeit and fraudulent items. NFC is one of the latest wireless communication technologies. As a short-range wireless connectivity technology, NFC offers safe-yet simple and intuitive-communication between electronic devices. As described above, NFC technology can be applied to the inspection and qualification management system very effectively to prevent counterfeit and fraudulent items. In addition, NIQM system can use existing data and information through the interface with legacy system.

  9. First experiment on LMJ facility: pointing and synchronisation qualification, sequences qualification

    Science.gov (United States)

    Henry, Olivier; Bretheau, Dominique; Luttmann, Michel; Graillot, Herve; Ferri, Michel; Seguineau, Frederic; Bar, Emmanuel; Patissou, Loic; Canal, Phillipe; Sautarel, Françoise; Tranquille Marques, Yves; Raffestin, Didier

    2016-10-01

    The LMJ (Laser mega Joule) facility at the CESTA site (Aquitaine, France) is a tool designed to deliver up to 1.2 MJ at 351 nm for plasma experiments. The experiment system will include 11 diagnostics: UV and X energy balances, imagers (Streak and stripe camera, CCD), spectrometers, and a Visar/pyrometer. The facility must be able to deliver, within the hour following the shot, all the results of the plasma diagnostics, alignment images and laser diagnostic measurements. These results have to be guaranteed in terms of conformity to the request and quality of measurement. The end of 2014 was devoted to the qualification of system pointing on target and synchronization within and between beams. The shots made with one chain (divided in 2 quads - 8 laser beams) have achieved 50 µm of misalignment accuracy (chain and quad channel) and a synchronization accuracy in the order of 50 ps. The performances achieved for plasma diagnostic (in the order of less 100 µm of alignment and timing accuracy less than 150 ps) comply with expectations. At the same time the first automatic sequences were tested. They allowed a shot on target every 6h:30 and in some case twice a day by reducing preparation actions, leading to a sequence of 4h:00. These shooting sequences are managed by an operating team of 7 people helped by 3 people for security aspects.

  10. Challenges of equipment qualification using today`s standards with emphasis on a class 1E motor program

    Energy Technology Data Exchange (ETDEWEB)

    Deaton, K.

    1995-02-01

    This paper describes qualification of new equipment for safety related service in the nuclear power industry in accordance with current industry standards. This topic is presented from the perspective of an original equipment manufacturer J(OEM). Equipment qualification is first discussed in a general way then an example is provided of an electric motor qualification. A review of alternative qualification methods including commercial dedication is included. Potential difficulties with alternative/expedited qualification methods are also discussed.

  11. An ultrasound score for knee osteoarthritis

    DEFF Research Database (Denmark)

    Riecke, B F; Christensen, R.; Torp-Pedersen, S

    2014-01-01

    OBJECTIVE: To develop standardized musculoskeletal ultrasound (MUS) procedures and scoring for detecting knee osteoarthritis (OA) and test the MUS score's ability to discern various degrees of knee OA, in comparison with plain radiography and the 'Knee injury and Osteoarthritis Outcome Score' (KOOS......) domains as comparators. METHOD: A cross-sectional study of MUS examinations in 45 patients with knee OA. Validity, reliability, and reproducibility were evaluated. RESULTS: MUS examination for knee OA consists of five separate domains assessing (1) predominantly morphological changes in the medial...... coefficients ranging from 0.75 to 0.97 for the five domains. Construct validity was confirmed with statistically significant correlation coefficients (0.47-0.81, P knee OA. In comparison with standing radiographs...

  12. The power and robustness of maximum LOD score statistics.

    Science.gov (United States)

    Yoo, Y J; Mendell, N R

    2008-07-01

    The maximum LOD score statistic is extremely powerful for gene mapping when calculated using the correct genetic parameter value. When the mode of genetic transmission is unknown, the maximum of the LOD scores obtained using several genetic parameter values is reported. This latter statistic requires higher critical value than the maximum LOD score statistic calculated from a single genetic parameter value. In this paper, we compare the power of maximum LOD scores based on three fixed sets of genetic parameter values with the power of the LOD score obtained after maximizing over the entire range of genetic parameter values. We simulate family data under nine generating models. For generating models with non-zero phenocopy rates, LOD scores maximized over the entire range of genetic parameters yielded greater power than maximum LOD scores for fixed sets of parameter values with zero phenocopy rates. No maximum LOD score was consistently more powerful than the others for generating models with a zero phenocopy rate. The power loss of the LOD score maximized over the entire range of genetic parameters, relative to the maximum LOD score calculated using the correct genetic parameter value, appeared to be robust to the generating models.

  13. Qualification of code-Saturne for thermal-hydraulics single phase nuclear applications

    International Nuclear Information System (INIS)

    Archambeau, F.; Bechaud, C.; Gest, B.; Martin, A.; Sakiz, M.

    2003-01-01

    Code-Saturne is a general finite volume CFD (computational fluid dynamics) code developed by Electricite de France (EDF) under quality assurance for 2- and 3-dimensional simulations, laminar and turbulent flows, conjugate heat transfer (coupling with thermal code SYRTHES), including combustion modelling and a Lagrangian module. A very large range of meshes can be used. The solver relies on a finite volume method on arbitrary meshes (hybrid, with hanging nodes, any type of element). All variables are located at the cell centres. The solver is time marching, with a predictor-corrector scheme for Navier-Stokes equations. Standard Reynolds Average Navier-Stokes modelling (RANS) is included (k-epsilon, RSM). Code-Saturne is used by EDF in various industrial fields such as process engineering, aeraulics, combustion and nuclear applications. The present paper describes the qualification phase carried out during 2001 for single-phase nuclear applications. Indeed, once an industrial product has been released and validated, it is of major importance, especially in this particular field related to safety matters, to demonstrate the ability of the code to help engineers produce satisfactory conclusions to industrial problems. In coherence with analyses and best practice guidelines such as those published by the ERCOFTAC Special Interest Group, it seemed important to base the qualification phase on well defined and documented experimental facilities, sufficiently complex to be representative of industrial studies. Much attention has been devoted to evaluating sensitivity to numerical parameters such as grid refinement, time step... Moreover, the qualification studies have been carried out in real-life conditions, that is in limited time, with industrial limitations on the number of grid cells, and by the teams usually producing such studies, so as to integrate a real industrial process in the qualification phase. Two test cases chosen to assess certain types of flows in PWR

  14. [Propensity score matching in SPSS].

    Science.gov (United States)

    Huang, Fuqiang; DU, Chunlin; Sun, Menghui; Ning, Bing; Luo, Ying; An, Shengli

    2015-11-01

    To realize propensity score matching in PS Matching module of SPSS and interpret the analysis results. The R software and plug-in that could link with the corresponding versions of SPSS and propensity score matching package were installed. A PS matching module was added in the SPSS interface, and its use was demonstrated with test data. Score estimation and nearest neighbor matching was achieved with the PS matching module, and the results of qualitative and quantitative statistical description and evaluation were presented in the form of a graph matching. Propensity score matching can be accomplished conveniently using SPSS software.

  15. [Prognostic scores for pulmonary embolism].

    Science.gov (United States)

    Junod, Alain

    2016-03-23

    Nine prognostic scores for pulmonary embolism (PE), based on retrospective and prospective studies, published between 2000 and 2014, have been analyzed and compared. Most of them aim at identifying PE cases with a low risk to validate their ambulatory care. Important differences in the considered outcomes: global mortality, PE-specific mortality, other complications, sizes of low risk groups, exist between these scores. The most popular score appears to be the PESI and its simplified version. Few good quality studies have tested the applicability of these scores to PE outpatient care, although this approach tends to already generalize in the medical practice.

  16. Gambling scores for earthquake predictions and forecasts

    Science.gov (United States)

    Zhuang, Jiancang

    2010-04-01

    This paper presents a new method, namely the gambling score, for scoring the performance earthquake forecasts or predictions. Unlike most other scoring procedures that require a regular scheme of forecast and treat each earthquake equally, regardless their magnitude, this new scoring method compensates the risk that the forecaster has taken. Starting with a certain number of reputation points, once a forecaster makes a prediction or forecast, he is assumed to have betted some points of his reputation. The reference model, which plays the role of the house, determines how many reputation points the forecaster can gain if he succeeds, according to a fair rule, and also takes away the reputation points betted by the forecaster if he loses. This method is also extended to the continuous case of point process models, where the reputation points betted by the forecaster become a continuous mass on the space-time-magnitude range of interest. We also calculate the upper bound of the gambling score when the true model is a renewal process, the stress release model or the ETAS model and when the reference model is the Poisson model.

  17. Application of the FOUR Score in Intracerebral Hemorrhage Risk Analysis.

    Science.gov (United States)

    Braksick, Sherri A; Hemphill, J Claude; Mandrekar, Jay; Wijdicks, Eelco F M; Fugate, Jennifer E

    2018-06-01

    The Full Outline of Unresponsiveness (FOUR) Score is a validated scale describing the essentials of a coma examination, including motor response, eye opening and eye movements, brainstem reflexes, and respiratory pattern. We incorporated the FOUR Score into the existing ICH Score and evaluated its accuracy of risk assessment in spontaneous intracerebral hemorrhage (ICH). Consecutive patients admitted to our institution from 2009 to 2012 with spontaneous ICH were reviewed. The ICH Score was calculated using patient age, hemorrhage location, hemorrhage volume, evidence of intraventricular extension, and Glasgow Coma Scale (GCS). The FOUR Score was then incorporated into the ICH Score as a substitute for the GCS (ICH Score FS ). The ability of the 2 scores to predict mortality at 1 month was then compared. In total, 274 patients met the inclusion criteria. The median age was 73 years (interquartile range 60-82) and 138 (50.4%) were male. Overall mortality at 1 month was 28.8% (n = 79). The area under the receiver operating characteristic curve was .91 for the ICH Score and .89 for the ICH Score FS . For ICH Scores of 1, 2, 3, 4, and 5, 1-month mortality was 4.2%, 29.9%, 62.5%, 95.0%, and 100%. In the ICH Score FS model, mortality was 10.7%, 26.5%, 64.5%, 88.9%, and 100% for scores of 1, 2, 3, 4, and 5, respectively. The ICH Score and the ICH Score FS predict 1-month mortality with comparable accuracy. As the FOUR Score provides additional clinical information regarding patient status, it may be a reasonable substitute for the GCS into the ICH Score. Copyright © 2018 National Stroke Association. Published by Elsevier Inc. All rights reserved.

  18. Diagnostic accuracy of guys Hospital stroke score (allen score) in acute supratentorial thrombotic/haemorrhagic stroke

    International Nuclear Information System (INIS)

    Zulfiqar, A.; Toori, K. U.; Khan, S. S.; Hamza, M. I. M.; Zaman, S. U.

    2006-01-01

    A consecutive series of 103 patients, 58% male with mean age of 62 year (range 40-75 years), admitted with supratentorial stroke in our teaching hospital were studied. All patients had Computer Tomography scan brain done after clinical evaluation and application of Allen stroke score. Computer Tomography Scan confirmed thrombotic stroke in 55 (53%) patients and haemorrhagic stroke in 48 (47%) patients. Out of the 55 patients with definitive thrombotic stroke on Computer Tomography Scan, Allen stroke score suggested infarction in 67%, haemorrhage in 6% and remained inconclusive in 27% of cases. In 48 patients with definitive haemorrhagic stroke on Computer Tomography Scan, Allen stroke score suggested haemorrhage in 60%, infarction in 11% and remained inconclusive in 29% of cases. The overall accuracy of Allen stroke score was 66%. (author)

  19. Seismic qualification of equipment by means of probabilistic risk assessment

    International Nuclear Information System (INIS)

    Azarm, M.A.; Farahzad, P.; Boccio, J.L.

    1982-01-01

    Upon the sponsorship of the Equipment Qualification Branch (EQB) of NRC, Brookhaven National Laboratory (BNL) has utilized a risk-based approach for identifying, in a generic fashion, seismically risk-sensitive equipment. It is anticipated that the conclusions drawn therefrom and the methodology employed will, in part, reconcile some of the concerns dealing with the seismic qualification of equipment in operating plants. The approach taken augments an existing sensitivity analysis, based upon the WASH-1400 Reactor Safety Study (RSS), by accounting for seismicity and component fragility with the Kennedy model and by essentially including the requisite seismic data presented in the Zion Probabilistic Safety Study (ZPSS). Parametrically adjusting the seismic-related variables and ascertaining their effects on overall plant risk, core-melt probability, accident sequence probability, etc., allows one to identify those seismically risk-sensitive systems and equipment. This paper describes the approach taken and highlights the results obtained thus far for a hypothetical pressurized water reactor

  20. Accreditation of qualification testing organizations: the industry viewpoint

    International Nuclear Information System (INIS)

    Roby, A.

    1983-01-01

    This paper presents the industry viewpoint on the program for the Accreditation of Qualification Testing Organizations, which has been proposed for rulemaking by the Nuclear Regulatory Commission. The IEEE has agreed to establish the program content, and would administer its requirements in accordance with an agreement between the NRC and IEEE of September 30th, 1981. Presented in this paper is the industry perspective, developed and prepared through the AIF, identifying the serious concerns which the accreditation program has raised. Discussed are the disadvantages of the program and those present benefits which would be lost if the program was adopted. The value of greater emphasis on current regulation to improve the qualification process is presented and the paper details areas where the NRC proposals do not provide adequate justification for the accreditation program

  1. Qualification paths of adult educators in Sweden and Denmark

    DEFF Research Database (Denmark)

    Andersson, Per; Köpsén, Susanne; Larson, Anne

    2013-01-01

    fields of education and training. In this study, we analyse the qualification paths, or learning trajectories, of prospective adult educators in Sweden and Denmark. The analysis is based on narrative interviews with 29 students in training to become adult educators. The career paths of adult educators...... are often long and winding roads. Becoming an adult educator could be their primary desire, but it could also be their ‘Plan B’, a second choice. Individual motives and external demands interact in the professionalisation process. A shift in focus from teaching subject and methods to teaching context...... and the relation to the learners is part of the professional development. Finally, we argue that both academic studies and hands-on work in the adult education community are crucial parts of the adult educator’s qualification path....

  2. ITER tungsten divertor design development and qualification program

    Energy Technology Data Exchange (ETDEWEB)

    Hirai, T., E-mail: takeshi.hirai@iter.org [ITER Organization, Route de Vinon sur Verdon, F-13115 Saint Paul lez Durance (France); Escourbiac, F.; Carpentier-Chouchana, S.; Fedosov, A.; Ferrand, L.; Jokinen, T.; Komarov, V.; Kukushkin, A.; Merola, M.; Mitteau, R.; Pitts, R.A.; Shu, W.; Sugihara, M. [ITER Organization, Route de Vinon sur Verdon, F-13115 Saint Paul lez Durance (France); Riccardi, B. [F4E, c/ Josep Pla, n.2, Torres Diagonal Litoral, Edificio B3, E-08019 Barcelona (Spain); Suzuki, S. [JAEA, Fusion Research and Development Directorate JAEA, 801-1 Mukouyama, Naka, Ibaragi 311-0193 (Japan); Villari, R. [Associazione EURATOM-ENEA sulla Fusione, Via Enrico Fermi 45, I-00044 Frascati, Rome (Italy)

    2013-10-15

    Highlights: • Detailed design development plan for the ITER tungsten divertor. • Latest status of the ITER tungsten divertor design. • Brief overview of qualification program for the ITER tungsten divertor and status of R and D activity. -- Abstract: In November 2011, the ITER Council has endorsed the recommendation that a period of up to 2 years be set to develop a full-tungsten divertor design and accelerate technology qualification in view of a possible decision to start operation with a divertor having a full-tungsten plasma-facing surface. To ensure a solid foundation for such a decision, a full tungsten divertor design, together with a demonstration of the necessary high performance tungsten monoblock technology should be completed within the required timescale. The status of both the design and technology R and D activity is summarized in this paper.

  3. From qualification design to training design using ECVET principles

    International Nuclear Information System (INIS)

    Ceclan, Mihail; Wastin, Franck

    2017-01-01

    The Joint Research Centre of European Commission was designated in 2009 as Operating agent of European Human Resources Observatory - in Nuclear (EHRO@N). EHRO@N identified the nuclear sector's major challenges: to fill@in the 30 % gap between HR demand and supply in decommissioning and to adapt nuclear E and T system to comply more to the labour market demands. The process of nuclear training system adaptation to the labour market needs is based on the design of the flexible qualifications (unit based qualifications) using European Credit system for Vocational Education and Training (ECVET) principles. The process of ECVET implementation in the nuclear energy sector is ongoing since 2011 and is based on the strategy and road map developed by EHRO-N. The current paper presents the latest developments on the designing of training programs based on exit outcomes.

  4. From qualification design to training design using ECVET principles

    Energy Technology Data Exchange (ETDEWEB)

    Ceclan, Mihail; Wastin, Franck [European Commission Joint Research Centre, Petten (Netherlands). Directorate Nuclear Safety and Security

    2017-05-15

    The Joint Research Centre of European Commission was designated in 2009 as Operating agent of European Human Resources Observatory - in Nuclear (EHRO@N). EHRO@N identified the nuclear sector's major challenges: to fill@in the 30 % gap between HR demand and supply in decommissioning and to adapt nuclear E and T system to comply more to the labour market demands. The process of nuclear training system adaptation to the labour market needs is based on the design of the flexible qualifications (unit based qualifications) using European Credit system for Vocational Education and Training (ECVET) principles. The process of ECVET implementation in the nuclear energy sector is ongoing since 2011 and is based on the strategy and road map developed by EHRO-N. The current paper presents the latest developments on the designing of training programs based on exit outcomes.

  5. Initial qualifications of adult educators – a comparative view

    DEFF Research Database (Denmark)

    Milana, Marcella; Larson, Anne; Søgaard Lund, Lise

    General adult education, vocationally oriented adult education and liberal education often represent separated fields of public intervention. Each of these sectors is characterized by organizational features and a financial structure that support the pursuing of specific educational goals....... These distinctions are reflected not only in the provision of adult education opportunities but also in public policies on adult learning. Consequently, initial education and training of adult educators as well as the policy on qualification of adult education professionals differs both between countries and between......, the paper will critically review current public policies in the field and problematise the role of existing education and training opportunities in providing those willing to teach adults in general adult education, vocationally oriented adult education or liberal education with the qualifications required...

  6. Developments in mechanical ultrasonic inspection and qualification of NDE

    International Nuclear Information System (INIS)

    Kauppinen, P.; Pitkaenen, J.; Kuusinen, P.

    2001-01-01

    Reliability of non-destructive testing results has a direct influence on structural integrity assessment and safety of the inspected structures e.g. NPP primary circuit pressure boundaries. Advanced technology together with highly skilled and experienced personnel is required. One of the current trends is automation. Mechanised equipment can replace tedious manual work in positioning and moving of the transducers. Large areas can be scanned, analysed and numerically documented for direct comparison of eventual later repeated inspections. Another major trend is qualification, which aims to ensure that the inspection results are correct and fit the purpose. The suitability and proper operation of equipment, methods and personnel i.e. the whole chain shall be proven. This presentation summarises the advances in automation and qualification of non-destructive inspection during the second project year, Monitoring of material degradation was included in the studied topics and will also be shortly described. (author)

  7. Overview of nuclear power plant equipment qualification issues and practices

    International Nuclear Information System (INIS)

    Torr, K.G.

    1989-01-01

    This report presents a view of and commentary on the current status of equipment qualification (EQ) in nuclear industries of the major western nations. The introductory chapters discuss the concepts of EQ, the elements of EQ process and highlight some of the key issues in EQ. A brief review of industry practices and some of the prevalent industrial standards is presented, followed by an overview of current regulatory positions in the USA, France, Germany and Sweden. A summary and commentary on the latest research findings on issues relating to accident simulation, to aging simulation and some special topics related to EQ, has been contributed by Franklin Research Centre of Philadelphia. The last part of the report deals with equipment qualification in Canada and gives recommendations on EQ for new plants as well as currently operational CANDU nuclear power plants

  8. Environmental qualification test of electrical penetration for nuclear power stations

    International Nuclear Information System (INIS)

    Kooziro, Tetsuya; Nakagawa, Akitoshi; Toyoda, Shigeru; Uno, Shunpei

    1979-01-01

    Environmental qualification test was conducted according to IEEE Std. 323-1974 in order to evaluate the safety and reliability of electrical penetration of PWR type nuclear power station. Electrical penetration is the assemblies of electric cables attached to the containment vessel and penetrate through the vessel. Since it is a part of the vessel, it is deemed to be one of the primary safety equipments that are important for the safety and reliability of nuclear power stations. Environmental tests were conducted continuously as to heat cycle, vibration and LOCA with the full size specimens of bushing type, pigtail type and triaxial cable type and at the same time thermal life and irradiation tests were conducted on the insulation materials used, in order to obtain the comprehensive evaluation of their electrical and mechanical characteristics. As the result, they all satisfied the requirements for the circuits for actual use during and after various environmental qualification tests according to IEEE Std. 323. (author)

  9. THE PROFESSIONAL QUALIFICATION SOLIDARY EXTENSION PROJECT AT ELECTRONICS: TECHNICAL AUXILIAR

    Directory of Open Access Journals (Sweden)

    Glaucio Lopes Ramos

    2009-10-01

    Full Text Available This paper has the objective to present the extension course “professional qualification solidary extension project at electronics: technical auxiliar” in the Electrical Engineering course in the University Center of Belo Horizonte, as a professional qualification activity that make possible to young, adults and elderly people from poor communities the social inclusion and an opportunity to improve their access to the labor market. The course is part of extension program of Uni-BH, UniTrabalho e Renda, that is offered since 2006. The responsible for the course are professors and students of the Electrical Engineering course, and an electricity project is also offered. This paper presents the results of an evaluation that is made for the students at the beginning and at the end of the course and showed that the concepts had been assimilated by the students and the expectation of them related to the insertion at labor market is also improved.

  10. The qualification of electrical components and instrumentations relevant to safety

    CERN Document Server

    Zambardi, F

    1989-01-01

    Systems and components relevant to safety of nuclear power plants must maintain their functional integrity in order to assure accident prevention and mitigation. Redundancy is utilized against random failures, nevertheless care must be taken to avoid common failures in redundant components. Main sources of degradation and common cause failures consist in the aging effects and in the changes of environmental conditions which occur during the plant life and the postulated accidents. These causes of degradation are expected to be especially significant for instrumentation and electrical equipment, which can have a primary role in safety systems. The qualification is the methodology by which component safety requirements can be met against the above mentioned causes of degradation. In this report the connection between the possible, plant conditions and the resulting degradation effects on components is preliminarily addressed. A general characterization of the qualification is then presented. Basis, methods and ...

  11. U-Mo fuel qualification program in HANARO

    International Nuclear Information System (INIS)

    Lee, K.H.; Lee, C.S.; Kim, H.R.; Kuk, I.H.; Kim, C.K.

    2000-01-01

    Atomized U-Mo fuel has shown good performance from the results of previous out-of-pile tests and post-irradiation examinations. A qualification program of rod type U-Mo fuel is in progress and the fuel will be irradiated in HANARO. 6 gU/cm 3 U-7Mo, U-8Mo and U-9Mo are considered in this program. The laboratory test results of porosity, mechanical property, thermal conductivity, and thermal compatibility test are discussed in this paper. In parallel with this qualification program, the feasibility study on the core conversion from the present U 3 Si fuel to U-Mo in HANARO will be initiated to provide technical bases for the policy making. Several options of core conversion for HANARO are proposed and each option will be addressed briefly in terms of the operation policy, fuel management, and licensing of HANARO. (author)

  12. Qualification testing and electrical measurement experience: A manufacturer's view

    Science.gov (United States)

    Arnett, J. C.; Cooley, J. E.; Wingert, T. L.

    1983-11-01

    ARCO Solar's experiences as a participant in an industry-utility-government environmental qualification team examining photovoltaic devices are discussed. Included is an assessment of the applicability, completeness and appropriateness of the testing procedures and of the acceptance criteria for megawatt-sized procurements for utilities. Like the stand-alone users, the utility industry is interested in obtaining low costs, but additional concerns exist related to reliability and durability, safety, grounding and overall system criteria including performance prediction (related to output power acceptance testing), power quality and dispatchability. For purposes of this first major purchase of photovoltaic modules and panels by the utility industry, there was a carry-over of the JPL specifications. The need exists for futher development, assessement, and selection of qualification and testing standards and evaluation criteria specifically addressing these additional concerns for utility-connected PV power-plant applications.

  13. D-score: a search engine independent MD-score.

    Science.gov (United States)

    Vaudel, Marc; Breiter, Daniela; Beck, Florian; Rahnenführer, Jörg; Martens, Lennart; Zahedi, René P

    2013-03-01

    While peptides carrying PTMs are routinely identified in gel-free MS, the localization of the PTMs onto the peptide sequences remains challenging. Search engine scores of secondary peptide matches have been used in different approaches in order to infer the quality of site inference, by penalizing the localization whenever the search engine similarly scored two candidate peptides with different site assignments. In the present work, we show how the estimation of posterior error probabilities for peptide candidates allows the estimation of a PTM score called the D-score, for multiple search engine studies. We demonstrate the applicability of this score to three popular search engines: Mascot, OMSSA, and X!Tandem, and evaluate its performance using an already published high resolution data set of synthetic phosphopeptides. For those peptides with phosphorylation site inference uncertainty, the number of spectrum matches with correctly localized phosphorylation increased by up to 25.7% when compared to using Mascot alone, although the actual increase depended on the fragmentation method used. Since this method relies only on search engine scores, it can be readily applied to the scoring of the localization of virtually any modification at no additional experimental or in silico cost. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Trends in Classroom Observation Scores

    Science.gov (United States)

    Casabianca, Jodi M.; Lockwood, J. R.; McCaffrey, Daniel F.

    2015-01-01

    Observations and ratings of classroom teaching and interactions collected over time are susceptible to trends in both the quality of instruction and rater behavior. These trends have potential implications for inferences about teaching and for study design. We use scores on the Classroom Assessment Scoring System-Secondary (CLASS-S) protocol from…

  15. Quadratic prediction of factor scores

    NARCIS (Netherlands)

    Wansbeek, T

    1999-01-01

    Factor scores are naturally predicted by means of their conditional expectation given the indicators y. Under normality this expectation is linear in y but in general it is an unknown function of y. II is discussed that under nonnormality factor scores can be more precisely predicted by a quadratic

  16. The Machine Scoring of Writing

    Science.gov (United States)

    McCurry, Doug

    2010-01-01

    This article provides an introduction to the kind of computer software that is used to score student writing in some high stakes testing programs, and that is being promoted as a teaching and learning tool to schools. It sketches the state of play with machines for the scoring of writing, and describes how these machines work and what they do.…

  17. Matching score based face recognition

    NARCIS (Netherlands)

    Boom, B.J.; Beumer, G.M.; Spreeuwers, Lieuwe Jan; Veldhuis, Raymond N.J.

    2006-01-01

    Accurate face registration is of vital importance to the performance of a face recognition algorithm. We propose a new method: matching score based face registration, which searches for optimal alignment by maximizing the matching score output of a classifier as a function of the different

  18. Modelling sequentially scored item responses

    NARCIS (Netherlands)

    Akkermans, W.

    2000-01-01

    The sequential model can be used to describe the variable resulting from a sequential scoring process. In this paper two more item response models are investigated with respect to their suitability for sequential scoring: the partial credit model and the graded response model. The investigation is

  19. Excellence in fleet combat replacement squadrons: predicting carrier qualification success

    OpenAIRE

    Smith, Martin P.

    1988-01-01

    This thesis presents a two-part analysis of excellence criteria for fleet combat replacement squadrons. Part one focuses on the qualitative issues and management techniques identified in outstanding fleet combat replacement squadrons. Part two develops and presents a regression model for predicting a fleet replacement squadron pilot's carrier qualification grade. The model was derived using standard linear regression techniques and the SPSSx software package of the Naval Postgraduate School. ...

  20. Applicability of qualification testing of electric cable to life extension

    International Nuclear Information System (INIS)

    Reynolds, A.B.

    1988-01-01

    The methods for qualification testing of electric cable for nuclear power plants followed by U.S. cable manufacturers and endorsed by the U.S. Nuclear Regulatory Commission (NRC) involve irradiation aging at high dose rates at room temperature and accident aging in steam without the pressure of air. Testing is done sequentially. The research data which led to some concerns have been reviewed, and some conclusions regarding these concerns are suggested

  1. Analytical considerations in the code qualification of piping systems

    International Nuclear Information System (INIS)

    Antaki, G.A.

    1995-01-01

    The paper addresses several analytical topics in the design and qualification of piping systems which have a direct bearing on the prediction of stresses in the pipe and hence on the application of the equations of NB, NC and ND-3600 of the ASME Boiler and Pressure Vessel Code. For each of the analytical topics, the paper summarizes the current code requirements, if any, and the industry practice

  2. High Temperature Materials Interim Data Qualification Report FY 2011

    International Nuclear Information System (INIS)

    Lybeck, Nancy

    2011-01-01

    Projects for the very high temperature reactor (VHTR) Technology Development Office provide data in support of Nuclear Regulatory Commission licensing of the VHTR. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high temperature and high fluence environments. The VHTR program has established the Next Generation Nuclear Plant (NGNP) Data Management and Analysis System (NDMAS) to ensure that VHTR data are qualified for use, stored in a readily accessible electronic form, and analyzed to extract useful results. This document focuses on the first NDMAS objective. It describes the High Temperature Materials characterization data stream, the processing of these data within NDMAS, and reports the interim fiscal year (FY) 2011 qualification status of the data. Data qualification activities within NDMAS for specific types of data are determined by the data qualification category assigned by the data generator. The High Temperature Materials data are being collected under the Nuclear Quality Assurance (NQA)-1 guidelines and will be qualified data. For NQA-1 qualified data, the qualification activities include: (1) capture testing to confirm that the data stored within NDMAS are identical to the raw data supplied, (2) accuracy testing to confirm that the data are an accurate representation of the system or object being measured, and (3) documenting that the data were collected under an NQA-1 or equivalent Quality Assurance program. Currently, data from seven test series within the High Temperature Materials data stream have been entered into the NDMAS vault, including tensile tests, creep tests, and cyclic tests. Of the 5,603,682 records currently in the vault, 4,480,444 have been capture passed, and capture testing is in process for the remaining 1,123,238.

  3. Qualification and certification of nondestructive testing personnel. Vol. 1

    Energy Technology Data Exchange (ETDEWEB)

    Aly, E A [Quality Assurance Department, national Center for Nuclear Safety and Radiation Control, Atomic Energy Authority, Cairo, (Egypt)

    1996-03-01

    Nondestructive testing and inspection are functions in achieving the goals of quality and efficiency at an acceptable cost. All quality assurance systems necessitate that engineers, technicians and craftsmen are able to demonstrate that they have the required level of knowledge and skill. This applies particularly to nondestructive testing (NDT) and inspection. The paper presented highlights most important national and international standards and guidelines addressing training, qualification and certification of NDT personnel.

  4. Do Qualification, Experience and Age Matter for Principals Leadership Styles?

    OpenAIRE

    Muhammad Javed Sawati; Saeed Anwar; Muhammad Iqbal Majoka

    2013-01-01

    The main focus of present study was to find out the prevalent leadership styles of principals in government schools of Khyber Pakhtunkhwa and to find relationship of leadership styles with qualifications, age and experience of the principals. On the basis of analyzed data, four major leadership styles of the principals were identified as Eclectic, Democratic, Autocratic, and Free-rein. However, a small proportion of the principal had no dominant leadership style. This study shows that princip...

  5. Training and qualification of nuclear power plant operators (4)

    International Nuclear Information System (INIS)

    Ohsuga, Y.

    2009-01-01

    Training center using the simulators, instructor training, training upgrade, deployment of digital control panel and review of training were described with overseas practice. Recently, nuclear power plant on-site simulators were also used for respective operator training. Operator teamwork training, training team performance upgrade, reflection of operating experiences in nuclear power plant accidents, development of training support equipments and management of training records were needed to review and upgrade training and qualification programs. (T. Tanaka)

  6. Calculation qualification of gadolinium burnable poisons in water reactors

    International Nuclear Information System (INIS)

    Chaucheprat, P.

    1988-01-01

    The work presented in this thesis constitutes the qualification on the one end of Appolo-Neptune scheme for the gadolinium burnable poison in a pressurized water reactor, and on the other end of basis nuclear data on natural gadolinium. This study has permitted to reduce by a factor 3 the actual incertitude on the gadolinium poison comparatively at precisions cited in international benchmarks calculations [fr

  7. Development of Regulatory Requirements for Qualification Management of Railway Drivers

    Energy Technology Data Exchange (ETDEWEB)

    Byun, Seong Nam; Kim, Sa Kil; Kyung, Tae Won; Kim, Jung Ho; Heo, Eun Mee; Park, Hong Jun [Kyung Hee University, Seoul (Korea, Republic of)

    2008-03-15

    It has been estimated that up to 90% of all workplace accidents have human error as a cause. Human error has been widely recognized as a key factor in almost all the highly publicized accidents, including Daegu subway fire of February 18, 2003 killed 198 people and injured 147. Because most human behavior is {sup u}nintentional{sup ,} carried out automatically, uncontrolled qualifications of rail drivers as root causes of human error should be carefully investigated and regulated by a legal authority.

  8. Qualification and certification of nondestructive testing personnel. Vol. 1

    International Nuclear Information System (INIS)

    Aly, E.A.

    1996-01-01

    Nondestructive testing and inspection are functions in achieving the goals of quality and efficiency at an acceptable cost. All quality assurance systems necessitate that engineers, technicians and craftsmen are able to demonstrate that they have the required level of knowledge and skill. This applies particularly to nondestructive testing (NDT) and inspection. The paper presented highlights most important national and international standards and guidelines addressing training, qualification and certification of NDT personnel

  9. Qualifications and ethics education: the views of ICT professionals

    OpenAIRE

    Yeslam Al-Saggaf; Oliver K. Burmeister; Michael Schwartz

    2017-01-01

    Do information and communications technology (ICT) professionals who have ICT qualifications believe that the ethics education they received as part of their ICT degrees helped them recognise ethical problems in the workplace and address them? If they do, are they also influenced by their personal ethics? What else helps them recognise ethical problems in the workplace and address them? And what are their views in relation to the impact of ethics education on professionalism in the ICT workpl...

  10. Qualifications and ethics education: the views of ICT professionals

    Directory of Open Access Journals (Sweden)

    Yeslam Al-Saggaf

    2017-11-01

    Full Text Available Do information and communications technology (ICT professionals who have ICT qualifications believe that the ethics education they received as part of their ICT degrees helped them recognise ethical problems in the workplace and address them? If they do, are they also influenced by their personal ethics? What else helps them recognise ethical problems in the workplace and address them? And what are their views in relation to the impact of ethics education on professionalism in the ICT workplace? A quantitative survey of 2,315 Australian ICT professionals revealed that participants who reported having various levels of qualifications found ethics education or training, to a small degree, helpful for recognising ethical problems and addressing them; although it is those with Non-ICT qualifications, not those with ICT degrees, who were influenced more by ethics education or training. This suggests that educators need to consider how to better prepare ICT graduates for the workplace challenges and the types of situations they subsequently experience. The survey also found that participants who reported having various levels of qualifications were not influenced by their personal ethics or indeed any other factor making ethics education or training important for developing professionalism. The quantitative survey was followed by qualitative interviews with 43 Australian ICT professionals in six Australian capital cities. These interviews provided further empirical evidence that ethics education is crucial for enabling ICT professionals to recognise ethical problems and resolve them and that educators need to consider how to better prepare ICT graduates for the types of moral dilemmas that they are likely going to face in the workforce.

  11. Development of Regulatory Requirements for Qualification Management of Railway Drivers

    International Nuclear Information System (INIS)

    Byun, Seong Nam; Kim, Sa Kil; Kyung, Tae Won; Kim, Jung Ho; Heo, Eun Mee; Park, Hong Jun

    2008-03-01

    It has been estimated that up to 90% of all workplace accidents have human error as a cause. Human error has been widely recognized as a key factor in almost all the highly publicized accidents, including Daegu subway fire of February 18, 2003 killed 198 people and injured 147. Because most human behavior is u nintentional , carried out automatically, uncontrolled qualifications of rail drivers as root causes of human error should be carefully investigated and regulated by a legal authority

  12. Qualification testing of flat-plate photovoltaic modules

    Science.gov (United States)

    Hoffman, A. R.; Griffith, J. S.; Ross, R. G., Jr.

    1982-01-01

    The placement of photovoltaic modules in various applications, in climates and locations throughout the world, results in different degrees and combinations of environmental and electrical stress. Early detection of module reliability deficiencies via laboratory testing is necessary for achieving long, satisfactory field service. This overview paper describes qualification testing techniques being used in the US Department of Energy's flat-plate terrestrial photovoltaic development program in terms of their significance, rationale for specified levels and durations, and test results.

  13. AGC-4 Experiment Irradiation Monitoring Data Qualification Interim Report

    International Nuclear Information System (INIS)

    Hull, Laurence Charles

    2016-01-01

    The Graphite Technology Development Program is running a series of six experiments to quantify the effects of irradiation on nuclear grade graphite. The fourth experiment, Advanced Graphite Creep 4 (AGC 4), began with Advanced Test Reactor (ATR) cycle 157D on May 30, 2015, and has been irradiated for two cycles. The capsule was removed from the reactor after ATR cycle 158A, which ended on January 2, 2016, due to interference with another experiment. Irradiation will resume when the interfering experiment is removed from the reactor. This report documents qualification of AGC 4 experiment irradiation monitoring data for use by the Advanced Reactor Technologies (ART) Technology Development Office (TDO) Program for research and development activities required to design and license the first HTR nuclear plant. Qualified data meet the requirements for use as described in the experiment planning and quality assurance documents. Failed data do not meet the requirements and provide no useable information. Trend data may not meet all requirements, but still provide some useable information. Use of Trend data requires assessment of how any deficiencies affect a particular use of the data. All thermocouples (TCs) have functioned throughout the AGC-4 experiment. All temperature data are Qualified for use by the ART TDO Program. Argon, helium, and total gas flow data were within expected ranges and are Qualified for use by the ART TDO Program. Discharge gas line moisture values were consistently low during cycle 157D. At the start of cycle 158A, gas moisture briefly spiked to over 600 ppmv and then declined throughout the cycle. Moisture values are within the measurement range of the instrument and are Qualified for use by the ART TDO Program. Graphite creep specimens were subjected to one of three loads, 393, 491, or 589 lbf. For a brief period during cycle 157D between 12:19 on June 2, 2015 and 08:23 on June 11, 2015 the load cells were wired incorrectly resulting in missing

  14. AGC-4 Experiment Irradiation Monitoring Data Qualification Interim Report

    Energy Technology Data Exchange (ETDEWEB)

    Hull, Laurence Charles [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-08-01

    The Graphite Technology Development Program is running a series of six experiments to quantify the effects of irradiation on nuclear grade graphite. The fourth experiment, Advanced Graphite Creep 4 (AGC 4), began with Advanced Test Reactor (ATR) cycle 157D on May 30, 2015, and has been irradiated for two cycles. The capsule was removed from the reactor after ATR cycle 158A, which ended on January 2, 2016, due to interference with another experiment. Irradiation will resume when the interfering experiment is removed from the reactor. This report documents qualification of AGC 4 experiment irradiation monitoring data for use by the Advanced Reactor Technologies (ART) Technology Development Office (TDO) Program for research and development activities required to design and license the first HTR nuclear plant. Qualified data meet the requirements for use as described in the experiment planning and quality assurance documents. Failed data do not meet the requirements and provide no useable information. Trend data may not meet all requirements, but still provide some useable information. Use of Trend data requires assessment of how any deficiencies affect a particular use of the data. All thermocouples (TCs) have functioned throughout the AGC-4 experiment. All temperature data are Qualified for use by the ART TDO Program. Argon, helium, and total gas flow data were within expected ranges and are Qualified for use by the ART TDO Program. Discharge gas line moisture values were consistently low during cycle 157D. At the start of cycle 158A, gas moisture briefly spiked to over 600 ppmv and then declined throughout the cycle. Moisture values are within the measurement range of the instrument and are Qualified for use by the ART TDO Program. Graphite creep specimens were subjected to one of three loads, 393, 491, or 589 lbf. For a brief period during cycle 157D between 12:19 on June 2, 2015 and 08:23 on June 11, 2015 the load cells were wired incorrectly resulting in missing

  15. Qualification of C and I systems using new technology components

    International Nuclear Information System (INIS)

    Gossner, S.

    1986-01-01

    Whereas one may find an almost complete change-over to microprocessor based automation and supervision systems in numerous industrial fields, a similar development did not yet take place in C and I systems of West German nuclear power plants. Neglecting some unimportant exceptions C and I systems of West German nuclear power plants are fully conventional. This situation, however, will not last forever. There is a growing understanding that by means of microcomputer-based C and I equipment it will be possible: to solve many problems more exactly, e.g. calculations of reactor power, power distribution, water levels, DNBR; to reduce the number of detailed informations and alarms concentrated in control rooms and control stations and to condense these informations into easily to understand pictorial displays, e.g. surveillance or trend pictures on graphic CRT-display units; to reduce cabling amount by using sequential data transmission, e.g. by means of bus-systems. It's clear in the near future microprocessors will enter not only operational C and I equipment but C and I systems important to safety as well. Therefore it's high time to analyse existing design and qualification requirements, qualification methods and qualification procedures whether or not to be suitable and sufficient

  16. QUALIFICATIONS FRAMEWORKS LEADING TO REFORMS IN EAST EUROPEAN EDUCATION

    Directory of Open Access Journals (Sweden)

    Arjen Vos

    2014-01-01

    Full Text Available The paper examines the evolution of qualifications frameworks across Europe. Five years ago, it was not clear if the discussions on national qualification frameworks (NQF in Eastern Europe would lead to the new standards and qualifications development, or initiate the reforms in education and training. Now, there is evidence of more countries using the NQFs to promote a dialogue between the public and private sectors on the expected outcomes of educational process. In some countries, the private sector has even taken the lead in the NQF discussions, being increasingly involved in their implementation. This is a fundamentally new paradigm in education policies and a cornerstone of the demand driven education and training. Each country is following its own patterns while moving to the comparable results. However, this is just the initial stage of NQF implementation. The author regards learning by doing and the local expertise expansion as the key challenges of the coming years. Although the reforms take time, they increasingly tend to become a shared public and private responsibility.

  17. Environmental qualification program of electric equipment for Angra 1

    International Nuclear Information System (INIS)

    Muzitano, Grazielle F.; Justino, Marcelo C.; Silva, Marcos C.

    2017-01-01

    This paper describes the development of the environmental qualification program for important electrical equipment (EQPEE) used for safety in Angra 1 Nuclear Power Plant (NPP). The environmental qualification program started in United States of America by the Nuclear Regulatory Commission (NRC) after the Three Mile Island (TMI) Nuclear Power Plant Accident in 1979. In that event, some equipment installed inside the reactor containment of TMI failed due the harsh conditions that occurred after the accident. Because of this fact, the NRC issued the Regulation 50.49 'Environmental qualification of electric equipment important to safety for nuclear power plants'. The Brazilian regulatory commission CNEN also asked Angra 1 to follow this regulation and to implement an EQPEE similar to the programs adopted by American and other NPPs around the world. Due to the importance to maintain the critical equipment operating in normal and abnormal environment conditions, the program aims to assure that this equipment remains qualified to work under the harsh conditions found inside the reactor containment. The aging of these components are also analyzed in this program that is important in the process to extend the operating life of Angra 1 for more 20 years, which is normally referred as Long Term Operation (LTO). (author)

  18. Qualification criteria verification for aisi-4340 steel suspension lug

    International Nuclear Information System (INIS)

    Riaz, M.A.; Alam, M.

    2005-01-01

    All external loads carried underneath an aircraft are mounted onto it through mechanism generally known as suspension system. The externally mounted attachments like bombs, missiles and fuel tanks etc. experience enormous aerodynamic and inertial forces in the flights. These forces are transferred to the interface point of suspension system, known as 'Suspension Lug'. Thus lugs are considered critical component and have extremely stringent qualification criteria standards used in the aviation industry in USA, Europe, Russia, etc. Different standards prevail in different parts of the world about qualification and testing of these lugs. As Pakistan is entering into aviation industry, therefore there is a need to fulfill the requirements of these standards, to suit Pakistani environment. The suspension lug under study is 2000 Ibs. load class made from AISI-4340 Steel having good mechanical properties as per required standard. The manufacturing processes included forging, machining and vacuum heat treatment. The prototypes of suspension lugs were manufactured in the local industry and subjected to the required mechanical tests such as tensile testing at 5 to 35 degree angles. Impact testing at cryogenic temperatures of -50 to -70 degree C, and breaking load testing were performed. The acceptable results were obtained and mechanical testing for qualification of lugs was finalized and standardized. The options were compared with practical viability, utilization of product and cost effectiveness. (author)

  19. Qualification of NDE personnel in the nuclear industry

    International Nuclear Information System (INIS)

    Epps, T.N.

    1984-01-01

    There has been evidence of ineffective programs for certifying nondestructive examination (NDE) personnel who conduct periodic inservice examinations in nuclear power plants under ASME Section XI Code requirements. This was brought to the attention of a group from the electric utility industry, the Electric Power Research Institute (EPRI), some NDE consultants and representatives from the American Society of Mechanical Engineers (ASME) by the Nuclear Regulatory Commission (NRC) in a May, 1982 meeting in Bethesda, Maryland. One problem pointed out by the NRC was the lack of a clear definition of qualification requirements for certification of NDE personnel who conduct ASME Section XI Inservice Inspection work in nuclear power plants. The NRC requested that the nuclear industry resolve this problem by formulating definitive qualification requirements for personnel certification that could be made an industry requirement. In June, 1982 the EPRI NDE Subcommittee held a general meeting for utility representatives to discuss the results of the May, 1982 meeting to develop a plan for industry response to the issue. The consensus was that an Ad Hoc Committee of utility representatives be convened to develop a document outlining qualification requirements for vertification of NDE personnel. The Ad Hoc Committee was formally convened on September 29, 1982

  20. Environmental qualification program of electric equipment for Angra 1

    Energy Technology Data Exchange (ETDEWEB)

    Muzitano, Grazielle F.; Justino, Marcelo C.; Silva, Marcos C., E-mail: grazi@eletronuclear.gov.br, E-mail: justino@eletronuclear.gov.br, E-mail: candeia@eletronuclear.gov.br [Eletrobras Termonuclear S.A. (ELETRONUCLEAR), Rio de Janeiro, RJ (Brazil)

    2017-11-01

    This paper describes the development of the environmental qualification program for important electrical equipment (EQPEE) used for safety in Angra 1 Nuclear Power Plant (NPP). The environmental qualification program started in United States of America by the Nuclear Regulatory Commission (NRC) after the Three Mile Island (TMI) Nuclear Power Plant Accident in 1979. In that event, some equipment installed inside the reactor containment of TMI failed due the harsh conditions that occurred after the accident. Because of this fact, the NRC issued the Regulation 50.49 'Environmental qualification of electric equipment important to safety for nuclear power plants'. The Brazilian regulatory commission CNEN also asked Angra 1 to follow this regulation and to implement an EQPEE similar to the programs adopted by American and other NPPs around the world. Due to the importance to maintain the critical equipment operating in normal and abnormal environment conditions, the program aims to assure that this equipment remains qualified to work under the harsh conditions found inside the reactor containment. The aging of these components are also analyzed in this program that is important in the process to extend the operating life of Angra 1 for more 20 years, which is normally referred as Long Term Operation (LTO). (author)

  1. Preliminary Hanford Waste Vitrification Plan Waste Form Qualification Plan

    International Nuclear Information System (INIS)

    Nelson, J.L.

    1987-09-01

    This Waste Form Qualification Plan describes the waste form qualification activities that will be followed during the design and operation of the Hanford Waste Vitrification Plant to ensure that the vitrified Hanford defense high-level wastes will meet the acceptance requirements of the candidate geologic repositories for nuclear waste. This plan is based on the defense waste processing facility requirements. The content of this plan is based on the assumption that the Hanford Waste Vitrification Plant high-level waste form will be disposed of in one of the geologic repository projects. Proposed legislation currently under consideration by Congress may change or delay the repository site selection process. The impacts of this change will be assessed as details of the new legislation become available. The Plan describes activities, schedules, and programmatic interfaces. The Waste Form Qualification Plan is updated regularly to incorporate Hanford Waste Vitrification Plant-specific waste acceptance requirements and to serve as a controlled baseline plan from which changes in related programs can be incorporated. 10 refs., 5 figs., 5 tabs

  2. Manual on training, qualification and certification of quality assurance personnel

    International Nuclear Information System (INIS)

    1986-01-01

    The Manual is applicable to those participants in a nuclear power project who are associated with establishment and implementation of the various quality assurance (QA) programmes during the life cycle of the project. It provides examples of typical QA functions to be undertaken and the associated qualification requirements, training programmes, training techniques and methods of certification of personnel implementing these functions. The necessary qualification and training requirements and practices for QA personnel are dependent primarily on the functions or activities to be performed. The two main functions of the QA unit noted previously as (a) ensuring QA programme establishment and execution and (b) verifying that activities have been correctly performed have been found in practice to require different qualifications and training of personnel. Therefore, for the purpose of this Manual the QA personnel may be classified in two groups who perform: QA programmatic and evaluation functions; Inspection and test functions. These titles do not necessarily represent separate or individual organizational groups or units and may be composed of one or of several different organizations

  3. Overview of the IAEA's activity on ISI qualification

    International Nuclear Information System (INIS)

    Trampus, P.

    2000-01-01

    The IAEA Subprogram on Nuclear Power Planning, Implementation and Performance is presented. It's objective is to assist Member States in: planning nuclear power programmes in an integrated manner considering all necessary factors; systematically improving overall performance and competitiveness of NPPs trough entire service life with due regard to safety; applying technological/engineering best practices including QA/QM in all areas of nuclear power utilisation. International working group on life management of NPPs (IWG-LMNPP) has been established in 1975 with 26 Member States and 2 international organizations in order to provide the Director General with advice and opinions and the Member States with information, recommendations and support in life management issues.The technical co-operation program RER/4/020 'Advanced NDT of Primary Circuit Components' is presented.The pilot study is aimed to provide the participating Member States with practical advice how to apply the IAEA's qualification methodology. The target application is Technical Justification for UT of WWER-1000 RPV shell weld (unit 5 of 'Kozloduy NPP). The concept is to simulate the qualification process through assistance to establish qualification for a real NPP component, using real ISI, in a real regulatory environment. Interim results for Bulgaria are reported and further tasks are outlined

  4. Qualification of NEXUS/ANC Nuclear Design System for PWR Analyses

    International Nuclear Information System (INIS)

    Mayhue, Larry; Milanova, Radka; Huria, Harish; Zhang, Baocheng; Franceschini, Fausto; Ouisloumen, Mohamed; Mueller, Erwin; Forslun Guimaraes, Petri

    2008-01-01

    NEXUS is a new cross section and nuclear data generation system for core simulators developed by Westinghouse. This system generates once-through, full temperature range nuclear data for both PWRs and BWRs. The system has been implemented for PWRs in the NEXUS/ANC code system. A brief description of the methodology and the codes comprising this system is presented. The qualification for NEXUS/ANC has been completed and a summary of some of the results is presented for 10 plants and 45 cycles of operation. These results include startup data and at-power axial offset performance. Results for low temperature calculations are also presented. The NEXUS/ANC system includes new methodology to cover the operation of AP1000 plants including a new pin power recovery method and a method to capture the effects of control rod depletion. A brief summary of these methods is also presented. (authors)

  5. Status of the beryllium tile bonding qualification activities for the manufacturing of the ITER first wall

    International Nuclear Information System (INIS)

    Mitteau, Raphaël; Eaton, R.; Perez, G.; Zacchia, F.; Banetta, S.; Bellin, B.; Gervash, A.; Glazunov, D.; Chen, J.

    2015-01-01

    The preparation of the manufacturing of the ITER first wall involves a qualification stage. The qualification aims at demonstrating that manufacturers can deliver the needed reliability and quality for the beryllium to copper bond, before the manufacturing can commence. The qualification is done on semi-prototype, containing relevant features relative to the beryllium armour (about 1/6 of the panel size). The qualification is done by the participating parties, firstly by a manufacturing semi-prototype and then by testing it under heat flux. One semi-prototype is manufactured and is being tested, and further from other manufacturers are still to come. The qualification programme is accompanied by bond defect investigations, which aim at defining defect acceptance criteria. Qualification and defect acceptance programme are supported by thermal and stress analyses, with good agreement regarding the thermal results, and some insights about the governing factors to bond damage.

  6. Status of the beryllium tile bonding qualification activities for the manufacturing of the ITER first wall

    Energy Technology Data Exchange (ETDEWEB)

    Mitteau, Raphaël, E-mail: Raphael.mitteau@iter.org [ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex (France); Eaton, R.; Perez, G. [ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul Lez Durance Cedex (France); Zacchia, F.; Banetta, S.; Bellin, B. [Fusion for Energy, Josep Pla 2, Torres Diagonal Litoral B3, 08019 Barcelona (Spain); Gervash, A.; Glazunov, D. [Efremov Research Institute, 189631 St. Petersburg (Russian Federation); Chen, J. [Southwestern Institute of Physics, Huangjing Road, Chengdu 610225 (China)

    2015-10-15

    The preparation of the manufacturing of the ITER first wall involves a qualification stage. The qualification aims at demonstrating that manufacturers can deliver the needed reliability and quality for the beryllium to copper bond, before the manufacturing can commence. The qualification is done on semi-prototype, containing relevant features relative to the beryllium armour (about 1/6 of the panel size). The qualification is done by the participating parties, firstly by a manufacturing semi-prototype and then by testing it under heat flux. One semi-prototype is manufactured and is being tested, and further from other manufacturers are still to come. The qualification programme is accompanied by bond defect investigations, which aim at defining defect acceptance criteria. Qualification and defect acceptance programme are supported by thermal and stress analyses, with good agreement regarding the thermal results, and some insights about the governing factors to bond damage.

  7. Extension of the lod score: the mod score.

    Science.gov (United States)

    Clerget-Darpoux, F

    2001-01-01

    In 1955 Morton proposed the lod score method both for testing linkage between loci and for estimating the recombination fraction between them. If a disease is controlled by a gene at one of these loci, the lod score computation requires the prior specification of an underlying model that assigns the probabilities of genotypes from the observed phenotypes. To address the case of linkage studies for diseases with unknown mode of inheritance, we suggested (Clerget-Darpoux et al., 1986) extending the lod score function to a so-called mod score function. In this function, the variables are both the recombination fraction and the disease model parameters. Maximizing the mod score function over all these parameters amounts to maximizing the probability of marker data conditional on the disease status. Under the absence of linkage, the mod score conforms to a chi-square distribution, with extra degrees of freedom in comparison to the lod score function (MacLean et al., 1993). The mod score is asymptotically maximum for the true disease model (Clerget-Darpoux and Bonaïti-Pellié, 1992; Hodge and Elston, 1994). Consequently, the power to detect linkage through mod score will be highest when the space of models where the maximization is performed includes the true model. On the other hand, one must avoid overparametrization of the model space. For example, when the approach is applied to affected sibpairs, only two constrained disease model parameters should be used (Knapp et al., 1994) for the mod score maximization. It is also important to emphasize the existence of a strong correlation between the disease gene location and the disease model. Consequently, there is poor resolution of the location of the susceptibility locus when the disease model at this locus is unknown. Of course, this is true regardless of the statistics used. The mod score may also be applied in a candidate gene strategy to model the potential effect of this gene in the disease. Since, however, it

  8. Passive autocatalytic recombiner process features and new status of international qualification

    International Nuclear Information System (INIS)

    Eckardt, Bernd A.; Losch, Norbert

    2010-01-01

    New results of International PAR-Severe Accidents Qualification in frame of EC/IRSN Core Melt Program PHEBUS (with real molten core) are presented. Example Results: AREVA PAR Design: Best performance very fast start-up • highest efficiency absolutely constant hydrogen depletion rates. Others: Some industrial competitors failed. This enveloping real severe accident tests represents the new international PAR qualification standard and finalized the PAR qualification successfully. The design features supports PAR Dual function

  9. Non-destructive testing. The current state of standards and qualification and certification for leak testing

    International Nuclear Information System (INIS)

    Tamura, Yoshikazu

    2011-01-01

    Domestic standards of the leak testing are enacted as one of Japan Industrial Standards. The conformity is advanced between these domestic standards and ISO (International Organization for Standardization) standard. ISO9712 (Non-destructive testing-Qualification and certification of personnel) was revised to include the leak testing of qualification and certification in 2005. The preparation working group of qualification and certification for leak testing is planning start aiming at the system in one and a half years. (author)

  10. Qualification test on class 1E charger and inverter in nuclear power plant

    International Nuclear Information System (INIS)

    Li Mingcheng; Lin Jian; Fu Mingxing; Xu Benfu; Ma Peifeng

    2014-01-01

    The qualification approach for class lE electrical equipment was introduced, based on IEC, IEEE and RCC-E standards and technical documents. Combined with a lot of practical experience, the qualification scheme for class lE charger and inverter was developed. The component evaluation, performance and stress test, EMC test, seismic test and software qualification for the equipment were analyzed in detail. (authors)

  11. Qualification of uranium-molybdenum alloy fuel - conclusions of an international workshop

    International Nuclear Information System (INIS)

    Snelgrove, J.L.; Languille, A.

    2000-01-01

    Thirty-one participants representing 21 reactors, fuel developers, fuel fabricators, and fuel reprocessors in 11 countries discussed the requirements for qualification of U-Mo alloy fuel at a workshop held at Argonne National Laboratory on January 17-18, 2000. Consensus was reached that the qualification plans of the U.S. RERTR program and the French U-Mo fuel development program are valid. The items to be addressed during qualification are summarized in the paper. (author)

  12. The utilization of VUJE specialists non-destructive testing qualification at international cooperation with company TECNATOM

    International Nuclear Information System (INIS)

    Kuna, M.

    2006-01-01

    The utilization of VUJE specialists non-destructive testing qualification at cooperation with company TECNATOM. The obtain of QDA qualification for ET examination for possibility of qualified evaluation in the foreign NPP (USA, Brazil). The acquired practical experiences by evaluation of ET data from NPP Angra Brazil and Waltz Mill USA. The obtain of SNT-TC-1A and EPRI qualification for the UT evaluation of penetration tube welds measurements. The practical experience during the measurement on NPP Shearon Harris (Author)

  13. Understanding to requirements for educational level in qualification of reactor operators

    International Nuclear Information System (INIS)

    Zhang Chi; Yang Di; Zhou Limin

    2007-01-01

    Requirements for qualification of reactor operators in nuclear safety regulations were discussed in this paper. The new issue was described in the confirmation of education level of reactor operators. The understanding to the requirements for Educational Level in Qualification of Reactor Operators was provided according to Higher Education Law of the People's Republic of China. It was proposed to improve the confirmation of qualification of reactor operators as soon as possible. (authors)

  14. The implementing of the training, examination and qualification for QA auditor

    International Nuclear Information System (INIS)

    Ma Xiaozheng; Han Peicong; Zhang Zhongyuan; Zhu Guoliang

    2007-01-01

    China Power Investment Corporation has implemented the training, examination and qualification for QA auditor based on the related requirements of the nuclear safety documents. The bases, planning of the procedure, implementing procedure and suggestions for implementing the training, examination and qualification are described in this article. That can be used as the reference for implementing the training, examination and qualification for QA auditor, as well as for establishment of the related guide. (authors)

  15. Link Between RI-ISI and Inspection Qualification: Relationship between Defect Detection Rate and Margin of Detection

    International Nuclear Information System (INIS)

    Shepherd, Barrie; Goujon, Sophie; Whittle, John

    2007-01-01

    Quantitative risk-informed in-service inspection (RI-ISI) requires a quantitative measurement of inspection effectiveness if the risk change associated with an inspection is to be determined. Knowing the probability of detection (POD) as a function of defect depth (through wall dimension) would provide ideal information. However the main in-service inspection method for nuclear plant is ultrasonics, for which defect detection capability depends on a wide variety of parameters besides defect depth, such as defect orientation, roughness, location, shape etc. In recognition of this the European approach to inspection qualification is generally based on some combination of technical justification, and practical trials on a relatively limited number of defects. This inspection qualification process involves demonstrating that defects of concern will generate responses in excess of the specified recording level or noise, depending on the inspection. It is not currently designed to quantify the probability with which defects will be detected. The work described in this report has been performed in order to help address the problem of how the information generated during inspection qualification can be used as an input for RI-ISI. The approach adopted has been to recognise that as the defect response increases above the recording or noise level, the probability of detecting defects is likely to increase. The work therefore involved an investigation of the relationship between POD (strictly speaking defect detection rate) and margin of detection. It involved blind manual and automated ultrasonic trials on artificial defects in test plates designed to generate a range of signal responses. The detection rate for defects which provided signals at a particular level above noise or above a recording level was then measured. A relationship between defect detection rate and margin of detection has been established based on these trials. In addition to establishing a stronger link

  16. Calibration and flight qualification of FORTIS

    Science.gov (United States)

    Fleming, Brian T.; McCandliss, Stephan R.; Redwine, Keith; Kaiser, Mary Elizabeth; Kruk, Jeffery; Feldman, Paul D.; Kutyrev, Alexander S.; Li, Mary J.; Moseley, S. H.; Siegmund, Oswald; Vallerga, John; Martin, Adrian

    2013-09-01

    The Johns Hopkins University sounding rocket group has completed the assembly and calibration of the Far-ultraviolet Off Rowland-circle Telescope for Imaging and Spectroscopy (FORTIS); a sounding rocket borne multi-object spectro-telescope designed to provide spectral coverage of up to 43 separate targets in the 900 - 1800 Angstrom bandpass over a 30' x 30' field-of-view. FORTIS is capable of selecting the far-UV brightest regions of the target area by utilizing an autonomous targeting system. Medium resolution (R ~ 400) spectra are recorded in redundant dual-order spectroscopic channels with ~40 cm2 of effective area at 1216 Å. The maiden launch of FORTIS occurred on May 10, 2013 out of the White Sands Missile Range, targeting the extended spiral galaxy M61 and nearby companion NGC 4301. We report on the final flight calibrations of the instrument, as well as the flight results.

  17. Ranging behavior relates to welfare indicators pre- and post-range access in commercial free-range broilers.

    Science.gov (United States)

    Taylor, Peta S; Hemsworth, Paul H; Groves, Peter J; Gebhardt-Henrich, Sabine G; Rault, Jean-Loup

    2018-06-01

    Little is known about the effect of accessing an outdoor range on chicken welfare. We tracked individual ranging behavior of 538 mixed-sex Ross 308 chickens on a commercial farm across 4 flocks in winter and summer. Before range access, at 17 to 19 d of age, and post-range access, at 30 to 33 and 42 to 46 d of age in winter and summer flocks respectively, welfare indicators were measured on chickens (pre-range: winter N = 292; summer N = 280; post-range: winter N = 131; summer N = 140), including weight, gait score, dermatitis and plumage condition. Post-ranging autopsies were performed (winter: N = 170; summer: N = 60) to assess breast burn, leg health, and ascites. Fewer chickens accessed the range in winter flocks (32.5%) than summer flocks (82.1%). Few relationships between welfare and ranging were identified in winter, likely due to minimal ranging and the earlier age of post-ranging data collection compared to summer flocks. In summer flocks prior to range access, chickens that accessed the range weighed 4.9% less (P = 0.03) than chickens that did not access the range. Pre-ranging weight, gait score, and overall plumage cover predicted the amount of range use by ranging chickens in summer flocks (P ranging behavior. In summer flocks post-range access, ranging chickens weighed 12.8% less than non-ranging chickens (P range visits were associated with lower weight (P range was associated with lower weight (P range in summer is partly related to changes in broiler chicken welfare. Further investigations are required to determine causation.

  18. Experience on environmental qualification of safety-related components for Darlington Nuclear Generating Station

    International Nuclear Information System (INIS)

    Yu, A.S.; Kukreti, B.M.

    1987-01-01

    The proliferation of Nuclear Power Plant safety concerns has lead to increasing attention over the Environmental Qualification (EQ) of Nuclear Power Plant Safety-Related Components to provide the assurance that the safety related equipment will meet their intended functions during normal operation and postulated accident conditions. The environmental qualification of these components is also a Licensing requirement for Darlington Nuclear Generating Station. This paper provides an overview of EQ and the experience of a pilot project, in the qualification of the Main Moderator System safety-related functions for the Darlington Nuclear Generating Station currently under construction. It addresses the various phases of qualification from the identification of the EQ Safety-Related Components List, definition of location specific service conditions (normal, adbnormal and accident), safety-related functions, Environmental Qualification Assessments and finally, an EQ system summary report for the Main Moderator System. The results of the pilot project are discussed and the methodology reviewed. The paper concludes that the EQ Program developed for Darlington Nuclear Generating Station, as applied to the qualification of the Main Moderator System, contained all the elements necessary in the qualification of safety-related equipment. The approach taken in the qualification of the Moderator safety-related equipment proves to provide a sound framework for the qualification of other safety-related components in the station

  19. Examining the reliability of ADAS-Cog change scores.

    Science.gov (United States)

    Grochowalski, Joseph H; Liu, Ying; Siedlecki, Karen L

    2016-09-01

    The purpose of this study was to estimate and examine ways to improve the reliability of change scores on the Alzheimer's Disease Assessment Scale, Cognitive Subtest (ADAS-Cog). The sample, provided by the Alzheimer's Disease Neuroimaging Initiative, included individuals with Alzheimer's disease (AD) (n = 153) and individuals with mild cognitive impairment (MCI) (n = 352). All participants were administered the ADAS-Cog at baseline and 1 year, and change scores were calculated as the difference in scores over the 1-year period. Three types of change score reliabilities were estimated using multivariate generalizability. Two methods to increase change score reliability were evaluated: reweighting the subtests of the scale and adding more subtests. Reliability of ADAS-Cog change scores over 1 year was low for both the AD sample (ranging from .53 to .64) and the MCI sample (.39 to .61). Reweighting the change scores from the AD sample improved reliability (.68 to .76), but lengthening provided no useful improvement for either sample. The MCI change scores had low reliability, even with reweighting and adding additional subtests. The ADAS-Cog scores had low reliability for measuring change. Researchers using the ADAS-Cog should estimate and report reliability for their use of the change scores. The ADAS-Cog change scores are not recommended for assessment of meaningful clinical change.

  20. From Rasch scores to regression

    DEFF Research Database (Denmark)

    Christensen, Karl Bang

    2006-01-01

    Rasch models provide a framework for measurement and modelling latent variables. Having measured a latent variable in a population a comparison of groups will often be of interest. For this purpose the use of observed raw scores will often be inadequate because these lack interval scale propertie....... This paper compares two approaches to group comparison: linear regression models using estimated person locations as outcome variables and latent regression models based on the distribution of the score....