WorldWideScience

Sample records for pyrroles

  1. pyrroles

    Indian Academy of Sciences (India)

    and various aldehydes to afford 4H-pyrano[3,2-b]pyrrole derivatives in moderate to good yield using ferric .... (pyran C5), 122.8, 122.4, 128.9, 132.7, 133.0, 141.6. (Ar-C), 179.0 (pyran C2). 2.2f ..... After Michael-type addition of malononitrile.

  2. Radiation Induced Polymerization of Pyrrole

    International Nuclear Information System (INIS)

    Sarada Idris; Ratnam, C.T.; Ahmad Ashrif Abu Bakar

    2016-01-01

    We demonstrate the polymerization of pyrrole by gamma irradiation. The pyrrole films were exposed to gamma ray from cobalt 60 source at doses ranging from 0 to 150 kGy. The films were subjected to structural and morphological analyses by using FTIR, SEM and AFM techniques. Similar studies were also made on pristine pyrrole film which serve as control. Results revealed that pyrrole has been successfully polymerized through irradiation induced reactions. The SEM images depicted the formation of cauliflower shape upon gamma irradiation. The structural changes of pyrrole also evidenced by FTIR spectra. Surface topography and roughness of pyrrole before and after gamma irradiation found to show significant differences. (author)

  3. Syntheses of Calix[4]Pyrroles by Amberlyst-15 Catalyzed Cyclocondensations of Pyrrole with Selected Ketones

    Directory of Open Access Journals (Sweden)

    Tanuja Bisht

    2007-11-01

    Full Text Available A facile and efficient protocol is reported for the synthesis of calix[4]pyrrolesand N-confused calix[4]pyrroles in moderate to excellent yields by reaction of dialkyl orcycloalkyl ketones with pyrrole catalyzed by reusable AmberlystTM-15 under eco-friendlyconditions.

  4. GRINDING SOLVENT-FREE PAAL-KNORR PYRROLE SYNTHESIS ...

    African Journals Online (AJOL)

    Paal-Knorr pyrrole synthesis on smectites as recyclable and green catalysts. Bull. Chem. Soc. .... 1-Propyl-2,5-dimethyl-1H-pyrrole (8a). Oil (reported as oil .... of pyrroles catalyzed by zirconium chloride under solvent-free conditions . Ultrason.

  5. The nonadiabatic deactivation paths of pyrrole

    International Nuclear Information System (INIS)

    Barbatti, Mario; Vazdar, Mario; Aquino, Adelia J. A.; Eckert-Maksic, Mirjana; Lischka, Hans

    2006-01-01

    Multireference configuration interaction (MRCI) calculations have been performed for pyrrole with the aim of providing an explanation for the experimentally observed photochemical deactivation processes. Potential energy curves and minima on the crossing seam were determined using the analytic MRCI gradient and nonadiabatic coupling features of the COLUMBUS program system. A new deactivation mechanism based on an out-of-plane ring deformation is presented. This mechanism directly couples the charge transfer 1 ππ* and ground states. It may be responsible for more than 50% of the observed photofragments of ππ*-excited pyrrole. The ring deformation mechanism should act complementary to the previously proposed NH-stretching mechanism, thus offering a more complete interpretation of the pyrrole photodynamics

  6. Oxidative coupling and polymerization of pyrroles

    International Nuclear Information System (INIS)

    Hansen, Gregers Hendrik; Henriksen, Rikke Morck; Kamounah, Fadhil S.; Lund, Torben; Hammerich, Ole

    2005-01-01

    The electrochemical oxidation of 2,4-dimethyl-3-ethylpyrrole in acetonitrile has been studied using cyclic voltammetry, constant current coulometry, preparative electrolyses and ab initio calculations. The product analysis after the preparative electrolyses was carried out by HPLC combined with UV-vis and electrospray ionization MS detection. The aim of the work was to address some of the unresolved problems in the oxidative oligomerization and polymerization of alkylpyrroles. The title compound was chosen as a model for studies of pyrroles that are more basic than the solvent-supporting electrolyte system and for that reason are forced to serve as the base accepting the protons released during the coupling steps. The voltammograms obtained by cyclic voltammetry at a substrate concentration of 2 mM and voltage scan rates between 0.02 and 2 V s -1 showed a characteristic trace-crossing phenomenon that could be demonstrated by digital simulation to be related to that fact that the deprotonations of the initially formed dimer dication are slow with second order rate constants in the range 10 3 -10 4 M -1 s -1 . The relative stability of the different tautomers of the protonated pyrrole monomer and the corresponding 2,2'-dimer was determined by ab initio calculations at the RHF 6-31G(d) level. The studies also included investigations of the effects resulting from addition of a non-nucleophilic base, 2,6-di-tert-butylpyridine, to the voltammetry solutions. The major product observed after preparative electrolyses was a trimer the structure of which is proposed to include a central 2H-pyrrole unit. Since 2H-pyrroles are stronger bases than the corresponding 1H-pyrroles, the trimer is effectively protected against further oxidation by protonation. Two other trimers were observed as minor or trace products as well as a 1H,2H-dimer and several tetramers, also in trace amounts. In addition to the dimer, the trimers and the tetramers, a number of other minor products could be

  7. Flexible supercapacitor based on electrochemically synthesized pyrrole formyl pyrrole copolymer coated on carbon microfibers

    International Nuclear Information System (INIS)

    Gholami, Mehrdad; Moozarm Nia, Pooria; Narimani, Leila; Sokhakian, Mehran; Alias, Yatimah

    2016-01-01

    Highlights: • A Flexible supercapacitor prepared by carbon microfibers coated with P(Py-co-FPy). • The variation of capacitance with different mole ratio of monomers is investigated. • The capacitance measured by different electrochemical methods. • This flexible supercapacitor can be discharged in higher currents for longer time. - Abstract: The main objective of this work is to prepare a flexible supercapacitor using electrochemically synthesized pyrrole formyl pyrrole copolymer P(Py-co-FPy) coated on the carbon microfibers. Due to difficulties of working with carbon microfibers, glassy carbon was used to find out optimized conditions by varying mole ratio of pyrrole and formyl pyrrole monomers on the capacitance value. The prepared electrodes were characterized using Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscope (FESEM), Brunauer–Emmett–Teller (BET) analysis, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Then the X-ray photoelectron spectroscopy (XPS) was used to characterize the optimized electrode. The specific capacitance is calculated using cyclic voltammetry, charge/discharge method, and impedance spectroscopy. The charge/discharge study reveals that the best specific capacitance is estimated to be 220.3 mF cm"−"2 for equal mole fraction of pyrrole and formyl pyrrole Py (0.1)-FP (0.1) at discharge current of 3 × 10"−"4 A. This optimized electrode keeps about 92% of its capacitance value in high current of discharging. The specific capacitances calculated by all the mentioned methods are in agreement with each other. Finally, the found optimized conditions were successfully applied to produce a flexible supercapacitor on the surface of carbon microfibers.

  8. Flexible supercapacitor based on electrochemically synthesized pyrrole formyl pyrrole copolymer coated on carbon microfibers

    Energy Technology Data Exchange (ETDEWEB)

    Gholami, Mehrdad, E-mail: mehrdad897@um.edu.my [University of Malaya center for ionic liquids, Department of Chemistry, Faculty of Science, University of Malaya, 50603 Kuala Lumpur (Malaysia); Department of Chemistry, Faculty of Science, University of Malaya, 50603 Kuala Lumpur (Malaysia); Department of Chemistry, Marvdasht Branch, Islamic Azad University, P.O. Box 465, Marvdasht (Iran, Islamic Republic of); Moozarm Nia, Pooria, E-mail: pooriamn@yahoo.com [University of Malaya center for ionic liquids, Department of Chemistry, Faculty of Science, University of Malaya, 50603 Kuala Lumpur (Malaysia); Narimani, Leila, E-mail: Narimani.leila@gmail.com [University of Malaya center for ionic liquids, Department of Chemistry, Faculty of Science, University of Malaya, 50603 Kuala Lumpur (Malaysia); Sokhakian, Mehran, E-mail: m.sokhakian@gmail.com [University of Malaya center for ionic liquids, Department of Chemistry, Faculty of Science, University of Malaya, 50603 Kuala Lumpur (Malaysia); Alias, Yatimah, E-mail: yatimah70@um.edu.my [University of Malaya center for ionic liquids, Department of Chemistry, Faculty of Science, University of Malaya, 50603 Kuala Lumpur (Malaysia); Department of Chemistry, Faculty of Science, University of Malaya, 50603 Kuala Lumpur (Malaysia)

    2016-08-15

    Highlights: • A Flexible supercapacitor prepared by carbon microfibers coated with P(Py-co-FPy). • The variation of capacitance with different mole ratio of monomers is investigated. • The capacitance measured by different electrochemical methods. • This flexible supercapacitor can be discharged in higher currents for longer time. - Abstract: The main objective of this work is to prepare a flexible supercapacitor using electrochemically synthesized pyrrole formyl pyrrole copolymer P(Py-co-FPy) coated on the carbon microfibers. Due to difficulties of working with carbon microfibers, glassy carbon was used to find out optimized conditions by varying mole ratio of pyrrole and formyl pyrrole monomers on the capacitance value. The prepared electrodes were characterized using Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscope (FESEM), Brunauer–Emmett–Teller (BET) analysis, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Then the X-ray photoelectron spectroscopy (XPS) was used to characterize the optimized electrode. The specific capacitance is calculated using cyclic voltammetry, charge/discharge method, and impedance spectroscopy. The charge/discharge study reveals that the best specific capacitance is estimated to be 220.3 mF cm{sup −2} for equal mole fraction of pyrrole and formyl pyrrole Py (0.1)-FP (0.1) at discharge current of 3 × 10{sup −4} A. This optimized electrode keeps about 92% of its capacitance value in high current of discharging. The specific capacitances calculated by all the mentioned methods are in agreement with each other. Finally, the found optimized conditions were successfully applied to produce a flexible supercapacitor on the surface of carbon microfibers.

  9. Preparation of conductive membranes using poly pyrrole

    International Nuclear Information System (INIS)

    Madaeni, S.; Khavaran, B.

    2003-01-01

    Conductive membranes show many benefits including fouling reduction for feeds containing ionic species. These membranes may be prepared either by conductive polymers or coating of the surfaces of non-conductive membranes with conductive polymer. In this research, the commercial micro filtration GVHP membrane manufactured from PVDF was coated with poly pyrrole using two different techniques. The conductivity of the prepared membranes was measured. In this paper, effects of various factors including concentration of the solutions, oxidizing agents, time for leaving the support in the solutions, support type and temperature on membrane conductivity were investigated

  10. Macrophage activating activity of pyrrole alkaloids from Morus alba fruits.

    Science.gov (United States)

    Kim, Seon Beom; Chang, Bo Yoon; Jo, Yang Hee; Lee, Sang Hoon; Han, Sang-Bae; Hwang, Bang Yeon; Kim, Sung Yeon; Lee, Mi Kyeong

    2013-01-09

    The fruits of Morus alba have been traditionally used as a tonic to enhance immune responses. The macrophage activating constituents of Morus alba fruits were purified using various column chromatography techniques. The structures of isolated compounds were determined on the basis of spectroscopic data interpretation such as 1D and 2D NMR analysis. The macrophage activating activities of isolated compounds were evaluated by measuring the production of nitric oxide, TNF-α and IL-12 in RAW 264.7 cells. The phagocytic activity was also evaluated. Five pyrrole alkaloids, 5-(hydroxymethyl)-1H-pyrrole-2-carboxaldehyde (1), 2-formyl-1H-pyrrole-1-butanoic acid (2), 2-formyl-5-(hydroxymethyl)-1H-pyrrole-1-butanoic acid (3), 2-formyl-5-(methoxymethyl)-1H-pyrrole-1-butanoic acid (4) and Morrole A (5) were isolated from the fruits of Morus alba. Morrole A (5) is first reported in nature and other pyrrole alkaloids (1-4) are first reported from Morus species. Among the isolated compounds, compounds 3 and 4 significantly activated macrophage activity by the enhancement of nitric oxide, TNF-α and IL-12 production, and the stimulation of phagocytic activity in RAW 264.7 cells. Pyrrole alkaloids, including a new compound, were isolated from Morus alba fruits. These compounds activated macrophage activity in RAW 264.7 cells. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

  11. Adsorption characteristics and polymerization of pyrrole on Y-zeolites

    Energy Technology Data Exchange (ETDEWEB)

    Matsumoto, Akihiko; Kitajima, Tsutomu; Tsutsumi, Kazuo

    1999-10-26

    Conductive polymers have attracted considerable interest from the viewpoint of their electrochemical aspects and have been investigated for application in novel devices such as solid electrolyte cells and molecular electronic devices. Adsorption characteristics and polymerization of pyrrole on Y-zeolites of different cation types (NaY, HY, and CuY) have been investigated in connection with adsorption behavior, in situ IR spectroscopy, and EPR spectroscopy. Adsorption of pyrrole on NaY is physisorption giving no significant changes in IR and EPR spectra. In the adsorption on HY and CuY, the formation of pyrrole oligomers or polymers is observed. Pyrrole oligomer formed on HY is a nonconjugated one, which gives no EPR signal. In the case of CuY, EPR signal assigned to polaron of polypyrrole was observed at g = 2.008 by the pyrrole adsorption. The relationship between the amount of the spin of g = 2.008 and the adsorbed amount of pyrrole was linear even at the number of pyrrole exceeding that of Cu{sub 2+}, which suggests that the polymerization giving conjugated polypyrrole would take place on Cu{sup 2+} sites and the polypyrrole of aromatic form would be oxidized to quinoid form to give polaron on CuY surface.

  12. Hydrolytic study of the copolymer Poly pyrrole/ Polyethyleneglycol and Poly pyrrole synthesized by plasma

    International Nuclear Information System (INIS)

    Colin, E.; Enriquez, M.A.; Olayo, M.G.; Cruz, G.J.; Carapia, L.; Romero, M.; Morales, J.; Olayo, R.

    2006-01-01

    In this work the study about the hydrolytic compatibility of semiconductor polymers, copolymer Poly pyrrole/ Polyethyleneglycol (PPy/PEG) and Poly pyrrole (PPy) for their possible use as biomaterials. The polymers were synthesized by plasma between 10 and 100 W, with discharges of splendor RF to 13.5 MHz with resistive coupling. The hydrolytic affinity was evaluated calculating the contact angle with solutions of NaCl, NaCl-MgSO 4 and Krebs-Ringer. The results show a hydrophilicity increment due to the increase of the surface ruggedness with the synthesis energy. On the contrary, the crystallinity diminishes when increasing the power in PPy and it stays approximately constant in PPy/PEG. The electric conductivity presents a growth from 2 to 4 magnitude orders in function of the water content in the polymers. (Author)

  13. Pyrrole-Pyridine and Pyrrole-Naphthyridine Hosts for Anion Recognition

    Directory of Open Access Journals (Sweden)

    M. Angeles García

    2015-05-01

    Full Text Available The association constants of the complexes formed by two hosts containing pyrrole, amide and azine (pyridine and 1,8-naphthyridine groups and six guests, all monoanions (Cl−, CH3CO2−, NO3−, H2PO4−, BF4−, PF6−, have been determined using NMR titrations. The X-ray crystal structure of the host N2,N5-bis(6-methylpyridin-2-yl-3,4-diphenyl-1H-pyrrole- 2,5-dicarboxamide (1 has been solved (P21/c monoclinic space group. B3LYP/6-31G(d,p and calculations were carried out in an attempt to rationalize the trends observed in the experimental association constants.

  14. Pyrrole alkaloids from the fruits of Morus alba.

    Science.gov (United States)

    Kim, Seon Beom; Chang, Bo Yoon; Hwang, Bang Yeon; Kim, Sung Yeon; Lee, Mi Kyeong

    2014-12-15

    Phytochemical investigation of the fruits of Morus alba afforded seventeen pyrrole alkaloids including five new compounds. The structures of five new pyrrole alkaloids, named morroles B-F (4, 5, 7, 16 and 17), were determined on the basis of spectroscopic interpretations. 4-[Formyl-5-(hydroxymethyl)-1H-pyrrol-1-yl]butanoate (2) was synthesized by chemical reaction but first isolated from nature. Among isolated compounds, compounds 6 and 14 significantly inhibited pancreatic lipase activity. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. Hydroquinone–pyrrole dyads with varied linkers

    Directory of Open Access Journals (Sweden)

    Hao Huang

    2016-01-01

    Full Text Available A series of pyrroles functionalized in the 3-position with p-dimethoxybenzene via various linkers (CH2, CH2CH2, CH=CH, C≡C has been synthesized. Their electronic properties have been deduced from 1H NMR, 13C NMR, and UV–vis spectra to detect possible interactions between the two aromatic subunits. The extent of conjugation between the subunits is largely controlled by the nature of the linker, with the largest conjugation found with the trans-ethene linker and the weakest with the aliphatic linkers. DFT calculations revealed substantial changes in the HOMO–LUMO gap that correlated with the extent of conjugation found experimentally. The results of this work are expected to open up for use of the investigated compounds as components of redox-active materials in sustainable, organic electrical energy storage devices.

  16. Computational study on the functionalization of BNNC with pyrrole molecule

    Science.gov (United States)

    Payvand, Akram; Tavangar, Zahra

    2018-05-01

    The functionalization of the boron nitride nanocone (BNNC) by pyrrole molecule was studied using B3LYP/6-311+G(d) level of theory. The reaction was studied in three methods in different layers of the nanocone: Diels-Alder cycloaddition, quartet cycloaddition and the reaction of the nitrogen atom of the pyrrole molecule with the boron or nitrogen atom of the BNNC. Thermodynamic quantities, Chemical hardness and potential and electrophilicity index of the functionalized BNNC were studied. The results show that the tip of nanocone has a higher tendency for participation in the reaction and the most favorable product of the reaction between BNNC and pyrrole molecule is produced from the reaction of N atom of pyrrole with the B atom of BNNC. The reaction decreases the energy gap value which leads to increasing the reactivity and conductivity of functionalized nanocone. The calculated NICS values confirm the aromaticity in the pristine nanocone as well as in the functionalized nanocone.

  17. STUDY OF ELECTROPOLIMERIZATION PROCESSES OF PYRROLE BY CYCLIC VOLTAMMETRIC TECHNIQUE

    Directory of Open Access Journals (Sweden)

    Adhitasari Suratman

    2010-06-01

    Full Text Available Electropolymerization processes and electrochemical properties of polypyrrole as electroactive polymer have been studied by cyclic voltammetric technique. Pyrrole was electropolymerized to form polypyrrole in water-based solvent containing sodium perchlorate as supporting electrolyte in several pH values. The pH of the solutions were varied by using Britton Robinson buffer. The results showed that oxidation potential limit of electropolymerization processes of pyrrole was 1220 mV vs Ag/AgCl reference electrode. It can be seen that cyclic voltammetric respon of polypyrrole membrane that was prepared by electropolymerization processes of pyrrole at the scanning rate of 100 mV/s was stable. While the processes of pyrrole electropolymerization carried out at the variation of pH showed that the best condition was at the pH range of 2 - 6.   Keywords: polypyrolle, electropolymer, voltammetric technique

  18. Simple two-step synthesis of 2,4-disubstituted pyrroles and 3,5-disubstituted pyrrole-2-carbonitriles from enones

    Directory of Open Access Journals (Sweden)

    Murat Kucukdisli

    2014-02-01

    Full Text Available The cyclocondensation of enones with aminoacetonitrile furnishes 3,4-dihydro-2H-pyrrole-2-carbonitriles which can be readily converted to 2,4-disubstituted pyrroles by microwave-induced dehydrocyanation. Alternatively, oxidation of the intermediates produces 3,5-disubstituted pyrrole-2-carbonitriles.

  19. Synthesis, autoxidation and photooxidation of hindered pyrrole derivatives. Hindered pyrrolic nitroxide radicals; Synthese, autoxydation et photoxidation de pyrroles encombres radicaux nitroxydes pyrroliques encombres

    Energy Technology Data Exchange (ETDEWEB)

    Ramasseul, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1969-07-01

    2,5-di-t-butyl and 2,3,5-tri-t-butyl pyrrole are prepared from pinacoline and their structure is confirmed by comparison with 2,5-di-t-butyl furan and thiophene (I.R., U.V. and N.M.R. {sup 13}C satellites observation giving J{sub 13{sub C-H}} and J{sub H{sub 3}-H{sub 4}}). The sensitized photooxidation of these hindered pyrroles gives corresponding hydroperoxides which most likely structure is determined using physical and chemical methods. Oxidation of 2,5-di-t-butyl and 2,3,5-tri-t-butyl pyrrole by hydrogen peroxide in presence of inorganic per-acid of by p-nitro-perbenzoic acid does not give the pyrrolic nitroxides in contrast with secondary amines. Some N-hydroxypyrroles are then prepared from pinacoline and ethyl pivaloyl-acetate. Their oxidation by lead dioxide gives the corresponding pyrrolic nitroxides. 2,5-di-t-butyl 3,4-di-ethoxycarbonyl pyrryl 1-oxy is isolated and studied spectroscopically (visible and U.V., E.P.R.). In marked contrast with ordinary nitroxides it does not show solvent effect. It can be compared with 2,4-di-t-butyl cyclopentadienone, a carbon analog. For both, the long wave length transition does not show the usual n - {pi}* behaviour; that is confirmed by E.P.R. Using Huckel method for pyrrolic nitroxide skeleton, it is possible to have a good interpretation of experimental data. (author) [French] Les di-t-butyl 2,5 et tri-t-butyl-2,3,5 pyrrole sont synthetises a partir de la pinacoline et leur structure confirmee par comparaison avec les di-t-butyl-2,5 furanne et thiophene (I.R., U.V. et R.M.N.: observation des satellites {sup 13}C conduisant a la mesure des J{sub 13{sub C-H}} et J{sub H{sub 3}{sub -H{sub 4}}). La photoxydation sensibilisee de ces pyrroles encombres conduit aux hydroperoxydes correspondants dont la structure la plus probable est determinee par les methodes physicochimiques. L'oxydation des di-t-butyl-2,5 et tri-t-butyl-2,3,5 pyrrole par l'eau oxygenee en presence de peracide mineral ou par l'acide p

  20. Synthesis of 14C analogue of 1,2-diaryl-[2-14C]-pyrroles

    International Nuclear Information System (INIS)

    Saemian, N.; Shirvani, G.; Matloubi, H.

    2007-01-01

    Three 1,2-diaryl pyrroles selective COX-2 inhibitors, 2-(4-fluorophenyl)-5-methyl-1-(4-methylsulfonyl-phenyl)-1H pyrrole, 2-(4-fluorophenyl)-1- [4-(methylsulfonyl) phenyl]-1H-pyrrole and 4-[2-(4-fluorophenyl)-1H-pyrrol-1-yl]benzenesulfon-amide, all three labeled with 14 C in the 2-position were prepared from para-fluoro-benzaldehyde-[carbonyl- 14 C]. (author)

  1. Polycondensation of pyrrole and benzaldehyde catalyzed by Maghnite–H+

    Directory of Open Access Journals (Sweden)

    2007-07-01

    Full Text Available Rapid synthesis of poly[(pyrrole-2,5-diyl-co-(benzylidene] was achieved under microwave irradiation via the condensation of pyrrole and benzaldehyde in 1,2-dichloroethane using acid exchanged montmorillonite clay called Maghnite–H+ (Mag–H+ as an efficient catalyst. The effect of the amount of catalyst and of time on the polymerization yield and on the viscosity of the polymers was studied. Compared with conventional static interfacial polymerization, the microwave-radiation polymerization reaction proceeded rapidly and was completed within 35 s. The conjugated polymer was characterized by means of 1H-NMR, X-ray diffraction, FT-IR spectroscopy and AFM. The X-ray data showed the presence of a backbone form of the [(pyrrole-2,5-diyl-co-(benzylidene] formed.

  2. Versatile functionalization of nanoelectrodes by oligonucleotides via pyrrole electrochemistry.

    Science.gov (United States)

    Descamps, Emeline; Nguyen, Khoa; Bouchain-Gautier, Christelle; Filoramo, Arianna; Goux-Capes, Laurence; Goffman, Marcello; Bourgoin, Jean-Philippe; Mailley, Pascal; Livache, Thierry

    2010-11-15

    Surface modification at the nanometer scale is a challenge for the future of molecular electronics. In particular, the precise anchoring and electrical addressing of biological scaffolds such as complex DNA nanonetworks is of importance for generating bio-directed assemblies of nano-objects for nanocircuit purposes. Herein, we consider the individual modification of nanoelectrodes with different oligonucleotide sequences by an electrochemically driven co-polymerization process of pyrrole and modified oligonucleotide sequences bearing pyrrole monomers. We demonstrate that this one-step technique presents the advantages of simplicity, localization of surface modification, mechanical, biological and chemical stability of the coatings, and high lateral resolution.

  3. Imidazopyridine/Pyrrole and hydroxybenzimidazole/pyrrole pairs for DNA minor groove recognition.

    Science.gov (United States)

    Renneberg, Dorte; Dervan, Peter B

    2003-05-14

    The DNA binding properties of fused heterocycles imidazo[4,5-b]pyridine (Ip) and hydroxybenzimidazole (Hz) paired with pyrrole (Py) in eight-ring hairpin polyamides are reported. The recognition profile of Ip/Py and Hz/Py pairs were compared to the five-membered ring pairs Im/Py and Hp/Py on a DNA restriction fragment at four 6-base pair recognition sites which vary at a single position 5'-TGTNTA-3', where N = G, C, T, A. The Ip/Py pair distinguishes G.C from C.G, T.A, and A.T, and the Hz/Py pair distinguishes T.A from A.T, G.C, and C.G, affording a new set of heterocycle pairs to target the four Watson-Crick base pairs in the minor groove of DNA.

  4. Influence of gamma irradiation on polymerization of pyrrole and glucose oxidase immobilization onto poly (pyrrole)/poly (vinyl alcohol) matrix

    Science.gov (United States)

    Idris, Sarada; A. Bakar, Ahmad Ashrif; Thevy Ratnam, Chantara; Kamaruddin, Nur Hasiba; Shaari, Sahbudin

    2017-04-01

    This paper describes the immobilization of glucose oxidase, GOx onto polymer matrix comprising of poly(pyrrole), PPy and poly(vinyl alcohol), PVA using gamma irradiation technique. Py/PVA-GOx film was prepared by spreading PVA:GOx, 1:1 solution onto dried pyrrole film and exposed to gamma irradiation from cobalt 60 source at doses ranging from 0 to 60 kGy. The films were subjected to structural and morphological analyses by using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), Scanning electron microscope (SEM), Field emission scanning electron microscope (FESEM) and Atomic-force microscopy (AFM) techniques. Similar studies were also made on pristine pyrrole film which served as control. The SEM and FTIR spectra of Py/PVA-GOx film revealed that pyrrole has been successfully polymerized through irradiation-induced reactions. The results on the morphological properties of the samples characterize using FESEM, SEM and AFM further confirmed the occurrence of radiation-induced modification of Py/PVA-GOx film. The FTIR spectra showed the existence of intermolecular interaction between polymer matrix and GOx indicating that GOx had been successfully immobilized onto Ppy/PVA matrix by radiation-induced reactions. Results revealed that radiation induced reactions such as polymerization of pyrrole, crosslinking of PVA, grafting between the adjacent PVA and pyrrole molecules as well as immobilization of GOx onto Ppy/PVA matrix occurred simultaneously upon gamma irradiation. The optimum dose for GOx immobilization in the polymer matrix found to be 40 kGy. Therefore it is clear that this irradiation technique offered a simple single process to produce Py/PVA-GOx film without additional crosslinking and polymerization agents.

  5. A colorimetric tetrathiafulvalene-calix 4 pyrrole anion sensor

    DEFF Research Database (Denmark)

    Nielsen, K. A.

    2012-01-01

    The interaction and colorimetric sensing properties of a tetrathiafulvalene substituted calix[4]pyrrole sensor with anions were investigated using H-1 NMR and absorption spectroscopic techniques. Visual color changes were observed upon addition of different anions (Cl-, Br-, CN-, and Ac......O-) to a solution of the sensor. (C) 2012 Elsevier Ltd. All rights reserved....

  6. Interesting reactivity of diketones with pyrrole under acidic condition

    Indian Academy of Sciences (India)

    e-mail: pkpsc@uohyd.ernet.in; pradeepta.panda@gmail.com. MS received 18 October 2010; revised 7 June 2011; accepted 13 June 2011. Abstract. The acid catalysed condensation of diketones with pyrrole did not result in the formation of expected divergent bisdipyrromethane always; instead the product depends on the ...

  7. Influence of gamma irradiation on polymerization of pyrrole and glucose oxidase immobilization onto poly (pyrrole)/poly (vinyl alcohol) matrix

    Energy Technology Data Exchange (ETDEWEB)

    Idris, Sarada, E-mail: sarada@nuclearmalaysia.gov.my [Department of Radiation Technology, Malaysian Nuclear Agency, 43000, Bangi, Selangor (Malaysia); Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia, Bangi, 43600 (Malaysia); Bakar, Ahmad Ashrif A., E-mail: ashrif@ukm.edu.my [Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia, Bangi, 43600 (Malaysia); Thevy Ratnam, Chantara [Department of Radiation Technology, Malaysian Nuclear Agency, 43000, Bangi, Selangor (Malaysia); Kamaruddin, Nur Hasiba [Department of Electrical, Electronic and Systems Engineering, Faculty of Engineering & Built Environment, Universiti Kebangsaan Malaysia, Bangi, 43600 (Malaysia); Shaari, Sahbudin [Institute of Microengineering and Nanoelectronics, Universiti Kebangsaan Malaysia, Bangi, 43600 (Malaysia)

    2017-04-01

    Graphical abstract: The illustration of pyrrole polymerization, PVA crosslinking and immobilization of GOx onto polymer matrix. - Highlights: • Immobilization of glucose oxidase onto polymer matrices by gamma irradiation is proposed. • Crosslinking and grafting of polymers implies the immobilization reaction. • The mechanisms relies on gamma irradiation doses. • A simple single step process of polymerization, cross linking and immobilization by mean of gamma irradiation as was shown in Graphical abstract. - Abstract: This paper describes the immobilization of glucose oxidase, GOx onto polymer matrix comprising of poly(pyrrole), PPy and poly(vinyl alcohol), PVA using gamma irradiation technique. Py/PVA-GOx film was prepared by spreading PVA:GOx, 1:1 solution onto dried pyrrole film and exposed to gamma irradiation from cobalt 60 source at doses ranging from 0 to 60 kGy. The films were subjected to structural and morphological analyses by using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), Scanning electron microscope (SEM), Field emission scanning electron microscope (FESEM) and Atomic-force microscopy (AFM) techniques. Similar studies were also made on pristine pyrrole film which served as control. The SEM and FTIR spectra of Py/PVA-GOx film revealed that pyrrole has been successfully polymerized through irradiation-induced reactions. The results on the morphological properties of the samples characterize using FESEM, SEM and AFM further confirmed the occurrence of radiation-induced modification of Py/PVA-GOx film. The FTIR spectra showed the existence of intermolecular interaction between polymer matrix and GOx indicating that GOx had been successfully immobilized onto Ppy/PVA matrix by radiation-induced reactions. Results revealed that radiation induced reactions such as polymerization of pyrrole, crosslinking of PVA, grafting between the adjacent PVA and pyrrole molecules as well as immobilization of GOx onto Ppy

  8. Influence of gamma irradiation on polymerization of pyrrole and glucose oxidase immobilization onto poly (pyrrole)/poly (vinyl alcohol) matrix

    International Nuclear Information System (INIS)

    Idris, Sarada; Bakar, Ahmad Ashrif A.; Thevy Ratnam, Chantara; Kamaruddin, Nur Hasiba; Shaari, Sahbudin

    2017-01-01

    Graphical abstract: The illustration of pyrrole polymerization, PVA crosslinking and immobilization of GOx onto polymer matrix. - Highlights: • Immobilization of glucose oxidase onto polymer matrices by gamma irradiation is proposed. • Crosslinking and grafting of polymers implies the immobilization reaction. • The mechanisms relies on gamma irradiation doses. • A simple single step process of polymerization, cross linking and immobilization by mean of gamma irradiation as was shown in Graphical abstract. - Abstract: This paper describes the immobilization of glucose oxidase, GOx onto polymer matrix comprising of poly(pyrrole), PPy and poly(vinyl alcohol), PVA using gamma irradiation technique. Py/PVA-GOx film was prepared by spreading PVA:GOx, 1:1 solution onto dried pyrrole film and exposed to gamma irradiation from cobalt 60 source at doses ranging from 0 to 60 kGy. The films were subjected to structural and morphological analyses by using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), Scanning electron microscope (SEM), Field emission scanning electron microscope (FESEM) and Atomic-force microscopy (AFM) techniques. Similar studies were also made on pristine pyrrole film which served as control. The SEM and FTIR spectra of Py/PVA-GOx film revealed that pyrrole has been successfully polymerized through irradiation-induced reactions. The results on the morphological properties of the samples characterize using FESEM, SEM and AFM further confirmed the occurrence of radiation-induced modification of Py/PVA-GOx film. The FTIR spectra showed the existence of intermolecular interaction between polymer matrix and GOx indicating that GOx had been successfully immobilized onto Ppy/PVA matrix by radiation-induced reactions. Results revealed that radiation induced reactions such as polymerization of pyrrole, crosslinking of PVA, grafting between the adjacent PVA and pyrrole molecules as well as immobilization of GOx onto Ppy

  9. Numerical Analysis Of Hooke Jeeves-Runge Kutta To Determine Reaction Rate Equation In Pyrrole Polymerization

    International Nuclear Information System (INIS)

    Gunawan, Indra; Sulistyo, Harry; Rochmad

    2001-01-01

    The numerical analysis of Hooke Jeeves Methods combined with Runge Kutta Methods is used to determine the exact model of reaction rate equation of pyrrole polymerization. Chemical polymerization of pyrrole was conducted with FeCI 3 / pyrrole solution at concentration ratio of 1.62 mole / mole and 2.18 mole / mole with varrying temperature of 28, 40, 50, and 60 o C. FeCl 3 acts as an oxidation agent to form pyrrole cation that will polymerize. The numerical analysis was done to examine the exact model of reaction rate equation which is derived from reaction equation of initiation, propagation, and termination. From its numerical analysis, it is found that the pyrrole polymerization follows third order of pyrrole cation concentration

  10. Oxoanion Recognition by Benzene-based Tripodal Pyrrolic Receptors

    Energy Technology Data Exchange (ETDEWEB)

    Bill, Nathan [University of Texas at Austin; Kim, Dae-Sik [University of Texas at Austin; Kim, Sung Kuk [University of Texas at Austin; Park, Jung Su [University of Texas at Austin; Lynch, Vincent M. [University of Texas at Austin; Young, Neil J [ORNL; Hay, Benjamin [ORNL; Yang, Youjun [University of Texas at Austin; Anslyn, Eric [University of Texas at Austin; Sessler, Jonathan L. [University of Texas

    2012-01-01

    Two new tripodal receptors based on pyrrole- and dipyrromethane-functionalised derivatives of a sterically geared precursor, 1,3,5-tris(aminomethyl)-2,4,6-triethylbenzene, are reported; these systems, compounds 1 and 2, display high affinity and selectivity for tetrahedral anionic guests, in particular dihydrogen phosphate, pyrophosphate and hydrogen sulphate, in acetonitrile as inferred from isothermal titration calorimetry measurements. Support for the anion-binding ability of these systems comes from theoretical calculations and a single-crystal X-ray diffraction structure of the 2:2 (host:guest) dihydrogen phosphate complex is obtained in the case of the pyrrole-based receptor system, 1. Keywords anion receptors, dihydrogen phosphate, hydrogen sulphate, X-ray structure, theoretical calculations.

  11. Studies of pyrrole black electrodes as possible battery positive electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Mengoli, G.; Musiani, M.M.; Fleischmann, M.; Pletcher, D.

    1984-05-01

    It is shown that a polypyrrole, pyrrole black, may be formed anodically in several aqueous acids. The polypyrrole film shows a redox couple at less positive potentials than that required to form the film and the charge associated with these reduction and oxidation processes together with their stabilty to cycling varies with the anion in solution and the potential where the polypyrrole is formed; over-oxidation of the film caused by taking its potential too positive has a particularly disadvantageous affect. In the acids HBr and HI, the polypyrrole films can act as a storage medium for Br/sub 2/ or I/sub 2/ so that they may be used as a substrate for a X/sub 2//X/sup -/ electrode. Such electrodes may be charge/discharge cycled and the pyrrole/Br/sub 2/ electrode shows promise as a battery positive electrode.

  12. Crystal structures of unsymmetrically mixed β-pyrrole substituted ...

    Indian Academy of Sciences (India)

    NiTPP(Ph)3(CN)5, 3 complex was synthesized and its solvated structure was examined by crystallography. ... sive interactions among the peripheral substituents.28,29 ... 1H NMR spectra of porphyrins were. 1047 ... Single crystals of MTPP(Ph)3Cl5 (M = 2H and Ni(II)) .... by ∼0.3–0.6ppm but β-pyrrole phenyls do not show.

  13. Asymmetrically substituted calix[4]pyrrole with chiral substituents

    Czech Academy of Sciences Publication Activity Database

    Štěpánek, P.; Šimák, Ondřej; Nováková, Z.; Wimmer, Zdeněk; Drašar, P.

    2011-01-01

    Roč. 9, č. 3 (2011), s. 682-683 ISSN 1477-0520 R&D Projects: GA MŠk 2B06024 Grant - others:NATO(XE) CBP.EAP.CLG.982972 Institutional research plan: CEZ:AV0Z40550506; CEZ:AV0Z50380511 Keywords : porphyrin derivatives * anion-binding * aggregation * pyrrole * ketones Subject RIV: CC - Organic Chemistry Impact factor: 3.696, year: 2011

  14. Synthesis and characterisation of new Schiff base monomers containing N-(alkyl and phenyl) pyrrole moieties

    Science.gov (United States)

    Amer, Ahcene Ait; Ilikti, Hocine; Maschke, Ulrich

    2017-11-01

    This article deals with the synthesis and characterisation of seven new functional Schiff base monomers, such as: M1: 1-(3-Pyrrole-1-yl-propylimino-methyl)-naphtalen-2-ol; M2: 2-(3-Pyrrole-1-yl-phenylimino-methyl)-phenol; M3: 1-(3-Pyrrole-1-yl-phenylimino-methyl)-naphtalen-2-ol; M4: N-(pyridin-2-yl-methylene)-2-(pyrrol-1-yl)-benzenamine; M5: N-(pyridin-2-yl-methylene)-3-(pyrrol-1-yl)-propan-1-amine; M6: 2-(3-pyrrol-1-yl-propylimino-methyl)-quinolin-8-ol; M7: 2-(3-pyrrol-1-yl-phenylimino-methyl)-quinolin-8-ol. Two series of compounds emerged from this study, N-propyl pyrrole derivatives (M1, M5, M6) and N-phenyl pyrrole compounds (M2, M3, M4, M7). All monomers were elaborated by condensation reactions between appropriate amines and aldehydes, and their molecular structures were confirmed by spectroscopic analysis methods like FT-IR, 1H NMR, 13C NMR, and GC-MS.

  15. Preparation of ultrathin pyrrolic conductor films as backings of radioactive sources

    International Nuclear Information System (INIS)

    Rodriguez, L.; Los Arcos, J.M.

    1993-01-01

    A procedure for electropolymerization of pyrrole has been set up in order to produce thin (> 15 μ g/cm 2 ) homogeneous (thickness variation 2 . The experimental equipment, reagent and procedure utilized is described as well as the characterization pyrrolic films produced

  16. Self-association and infrared spectres of some heterocyclic compounds based on pyrrol in solid state

    International Nuclear Information System (INIS)

    Mulloev, N.; Nurulloev, M.; Narziev, B.N.

    1993-01-01

    Present article is devoted to self-association and infrared spectres of some heterocyclic compounds based on pyrrol in solid state. The study results of self-association specified by molecular hydrogen bonds of some heterocyclic compounds based on pyrrol on spectres of infrared absorption of stretching vibrations of N-H group were considered.

  17. 2,5-Dimethyl-1-phenylsulfonyl-1H-pyrrole-3,4-dicarbaldehyde

    Directory of Open Access Journals (Sweden)

    2009-03-01

    Full Text Available In the title compound, C14H13NO4S, the mean planes of the pyrrole and phenyl rings form a dihedral angle of 88.7 (1°. The aldehyde groups are slightly twisted from the pyrrole plane. In the crystal structure, molecules are linked into a three-dimensional framework by C—H...O hydrogen bonds.

  18. Spectroscopic and theoretical studies on the aromaticity of pyrrol-2-yl-carbonyl conformers

    Science.gov (United States)

    Dubis, Alina T.; Wojtulewski, Sławomir; Filipkowski, Karol

    2013-06-01

    The aromaticity of s-cis and s-trans pyrrol-2-yl carbonyl conformers was studied by FT-IR, 1H NMR spectroscopy and DFT calculations at the B3LYP/6-311++G(d,p) level of theory. The Harmonic Oscillator Model of Aromaticity (HOMA) and Nucleus Independent Chemical Shift (NICS) indices were calculated to estimate π-electron delocalization in the pyrrole ring. The usefulness of infrared spectroscopy in the evaluation of the aromaticity of the homogeneous set of pyrroles is discussed. The influence of 2-substitution on different aspects of aromaticity and stability of the pyrrol-2-yl carbonyl conformers is also discussed. It is concluded that the substitution effect of the title pyrrole derivatives can be explained on the basis of theoretical and experimental measurements of π-electron delocalization, including IR data.

  19. Biofunctionalization of multiwalled carbon nanotubes by electropolymerized poly(pyrrole-concanavalin A) films.

    Science.gov (United States)

    Papper, Vladislav; Elouarzaki, Kamal; Gorgy, Karine; Sukharaharja, Ayrine; Cosnier, Serge; Marks, Robert S

    2014-10-13

    The synthesis and electropolymerization of a pyrrolic concanavalin A derivative (pyrrole-Con A) onto a multiwalled carbon nanotube (MWCNT) deposit is reported. Glucose oxidase was then immobilized onto the MWCNT-poly(pyrrole-Con A) coating by affinity carbohydrate interactions with the polymerized Con A protein. The resulting enzyme electrode was applied to the amperometric detection of glucose exhibiting a high sensitivity of 36 mA cm(-2) mol(-1) L and a maximum current density of 350 μA cm(-2) . © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. A Submarine Journey: The Pyrrole-Imidazole Alkaloids

    Directory of Open Access Journals (Sweden)

    Alessandra Scolaro

    2009-11-01

    Full Text Available In his most celebrated tale “The Picture of Dorian Gray”, Oscar Wilde stated that “those who go beneath the surface do so at their peril”. This sentence could be a prophetical warning for the practitioner who voluntarily challenges himself with trying to synthesize marine sponge-deriving pyrrole-imidazole alkaloids. This now nearly triple-digit membered community has been growing exponentially in the last 20 years, both in terms of new representatives and topological complexity − from simple, achiral oroidin to the breathtaking 12-ring stylissadines A and B, each possessing 16 stereocenters. While the biosynthesis and the role in the sponge economy of most of these alkaloids still lies in the realm of speculations, significant biological activities for some of them have clearly emerged. This review will account for the progress in achieving the total synthesis of the more biologically enticing members of this class of natural products.

  1. Grinding solvent-free Paal-Knorr pyrrole synthesis on smectites as ...

    African Journals Online (AJOL)

    Journal Home > Vol 32, No 1 (2018) > ... An environmentally benign method for the synthesis of N-substituted pyrroles from one-pot solvent-free ... conditions make this protocol practical, environmentally friendly and economically attractive.

  2. Theoretical study of structure and electronic properties of cyano-substituted pyrroles

    International Nuclear Information System (INIS)

    Rimarcik, Jan; Lukes, Vladimir; Klein, Erik; Griesser, Markus; Kelterer, Anne-Marie

    2008-01-01

    DFT and ab initio MP2 calculations of optimal geometries, dipole moments, polarizabilities, excitation energies and enthalpies of hydrogen or proton transfer from N-H group for cyano derivatives of pyrrole are presented. CN groups in α and β positions have distinct effects on electron spectra absorption bands. CN in α position causes larger bathochromic shift in comparison to β position. N-H bond dissociation enthalpies (BDE) of substituted pyrroles are higher by 7 kJ mol -1 than pyrrole BDE. Number and position of CN groups do not affect BDEs. Proton affinities of pyrrolyl anions and enthalpies of electron transfer from these anions are proportional to the number of CN groups in molecule. Each CN group causes decrease in proton affinity by 72 kJ mol -1 and 73 kJ mol -1 rise in electron transfer enthalpy. For several studied pyrroles, BDEs, proton affinities and electron transfer enthalpies in water and benzene were computed

  3. Five gene products are required for assembly of the central pyrrole moiety of coumermycin A1

    Czech Academy of Sciences Publication Activity Database

    Novotná, J.; Gust, B.; Kulik, A.; Spížek, Jaroslav; Heide, L.

    2013-01-01

    Roč. 40, č. 8 (2013), s. 915-925 ISSN 1367-5435 Institutional support: RVO:61388971 Keywords : Streptomyces * Coumermycin * Pyrrole Subject RIV: EE - Microbiology, Virology Impact factor: 2.505, year: 2013

  4. Biosynthesis, asymmetric synthesis, and pharmacology, including cellular targets, of the pyrrole-2-aminoimidazole marine alkaloids

    Digital Repository Service at National Institute of Oceanography (India)

    Al-Mourabit, A.; Zancanella, M.A.; Tilvi, S.; Romo, D.

    The pyrrole-2-aminoimidazole (P-2-AI) alkaloids are a growing family of marine alkaloids, now numbering well over 150 members, with high topographical and biological information content. Their intriguing structural complexity, rich and compact...

  5. Interaction of derived polymers from pyrrole with biocompatible solutions

    International Nuclear Information System (INIS)

    Lopez G, O. G.

    2010-01-01

    This work presents a study about the synthesis by plasma, the electric properties and superficial interaction of polymers derived from pyrrole doped with Iodine with potential use as bio material. Poly-pyrrole is a semiconductor and biocompatible polymer with potential application in the development of artificial muscles and implants where the electric interaction between cells and material is an important variable. The syntheses were made at 13.5 MHz in a glass tubular reactor of 1500 cm 3 with electrodes of 6.5 cm diameter and stainless steel flanges. An electrode was connected to the RF terminal of the power supply that is combined with a matching coupling resistance. The monomer and dopant used in this work were pyrrole and Iodine respectively, in closed containers. They were vaporized and injected separately into the reactor at room temperature and 0.1 mbar. The vapors of the reagents mixed freely in the reactor. The synthesis time was 240 min at 40, 60, 80 and 100 W. The polymers were obtained as thin films adhered to the reactor walls. The films were washed and swollen with distilled water and removed from the reactor walls with a small spatula. The polymers were irradiated with gamma rays at 18 and 22 KGy. Due to the fact that the doses are cumulative, the final dose applied was 40 KGy. The polymers characterization was carried out by Fourier Transform Infrared Spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy, contact angle, electrical conductivity and X-ray diffraction. The analyses indicates that the polymers have very similar structure in almost the entire power range, showing C-O, C=C, C-H, O-H, N-H bonds with a predominantly amorphous structure. The TGA analyses showed that the material has 4 or 5 loses of material. The first one starts after that 115 C except for the material irradiated at 40 KGy, this one begins in 87 C, the second one is in the interval of 196 and 295 C, the third one between 311 and 500 C, and the last

  6. An Efficient and Short Route for the Synthesis of Reverse Pyrrole Ribonucleosides

    Directory of Open Access Journals (Sweden)

    Pereira Letícia O. R.

    2002-01-01

    Full Text Available The synthesis of reverse pyrrole ribonucleosides methyl 5-C-(4-acetyl-5-methyl-pyrrol-1-yl-2,3-O-isopropylidene-5-deoxy- beta-D-ribofuranoside (10, methyl 5-C-(4-ethoxycarbonyl-5-methyl-pyrrol-1-yl-2,3-O-isopropylidene-5-deoxy- beta-D-ribofuranoside (11, methyl 5-C-(4-acetyl-5-methyl-pyrrol-1-yl-5-deoxy-beta-D-ribofuranoside (12, methyl 5-C-(4-ethoxycarbonyl-5-methyl-pyrrol-1-yl-5-deoxy- beta-D-ribofuranoside (13, methyl 5-deoxy-5-C-(3'-formyl-4'-hydroxypropyl-pyrrol-1'-yl-2,3-O-isopropylidene- beta-D-ribofuranoside (16 and methyl 5-deoxy-5-C-(3'-formyl-pyrrol-1'-yl-2,3-O-isopropylidene- beta-D-ribofuranoside (18 are described starting from readily available methyl 5-amino-5-deoxy-2,3-O-isopropylidene-beta-D-ribofuranoside (9. The synthetic strategy for the construction of the heterocyclic ring was based on the nucleophilic attack of (9 to 4-acetyl-2-n-butoxy-5-methyl-4,5-dihydrofuran (4, 4-carbetoxy-2-n-butoxy-5-methyl-4,5-dihydrofuran (5, 4-formyl-2-n-butoxy-4,5-dihydrofuran (6 and 4-formyl-1-methyl dioxabyciclo[3.3.0]oct-3-en (8, in situ. The later compounds were obtained from reaction between 3-diazo-2,4-pentadione (1, ethyl 2-diazoacetoacetate (2 or diazomalonaldehyde (3 and enol ethers using dirhodium tetraacetate as a catalyst.

  7. Photophysical properties of fullerenes prepared in an atmosphere of pyrrole

    Energy Technology Data Exchange (ETDEWEB)

    Glenis, S.; Cooke, S.; Chen, X.; Labes, M.M. (Temple Univ., Philadelphia, PA (United States))

    1994-10-01

    Samples of C[sub 60] and C[sub 70] containing a variety of nitrogen-doped species were prepared by arc vaporization of graphite in the presence of pyrrole. Cage-doped fractions were isolated by column chromatography and characterized by mass spectroscopy, optical absorption, and fluorescence measurements. Mass spectra were consistent with the substitution of an even number of carbon atoms of the C[sub 60] and C[sub 70] cages by nitrogen atoms. Carbonaceous clusters including fragmented fullerenes containing hydrogen atoms were also formed. UV-visible spectral analysis indicated that there is an influence of the molecular weight on the fundamental [pi]-[pi]* electronic transition. Fluorescence spectra showed a broad band containing vibrational fine structure that is attributed to photoseparated charges in the fragmented fullerenes and a shoulder on the low-energy side that is related to intrinsic excitation in the nitrogen-doped species. Fluorescence results imply a bandgap of 2.36 eV for the N doped fullerenes and the existence of intermediate excitonic transitions below the optical bandgap. Although it has not yet been possible to isolate a pure cage-doped material, the photophysical studies add credence to their existence and the importance of further attempts at their isolation. 17 refs., 4 figs., 1 tab.

  8. Characterization of poly pyrrole/montmorillonite electro polymerised onto Pt

    International Nuclear Information System (INIS)

    Castagno, K.R.L.; Azambuja, D.S.; Dalmoro, V.; Mauller, R.S.

    2010-01-01

    In this study films of polypyrrole/montmorillonite (PPy/MT) were electropolymerized on platinum in order to evaluate the performance of this technique in the preparation of nanocomposite materials and to determine the thermal properties and conductivity of the composites. The films were synthesized from a solution containing pyrrole, dodecylbenzene sulfonate, acid and two types of clays: montmorillonite-Na + (MT-Na) and montmorillonite-30B (MT-M). The characterization of the films we have used FT-IR, TEM, XRD, TGA, DSC and resistivity measurement by the four-point van der Pauw method. The study showed that the adopted method of exfoliation and the electropolymerization method used, allows obtaining nanocomposite materials. Analyses of FT-IR, TEM and XRD show that the clays are exfoliated in the polymer matrix. Thermal analysis of the films indicates that the addition of clay reflects an enhancement in the thermal properties of the matrix of PPy, but decreases the conductivity of the same. (author)

  9. Knorr-Rabe partial reduction of pyrroles: Application to the synthesis of indolizidine alkaloids

    Directory of Open Access Journals (Sweden)

    Ryan John H

    2008-01-01

    Full Text Available Abstract Background The Birch reduction of electron rich pyrroles does not occur readily. However, dissolving metal reduction with zinc under acidic conditions gives 3-pyrrolines (2,5-dihydropyrroles in reasonable yield. This dissolving metal reduction was first reported by Knorr and Rabe in 1901 but since then has only been reported for the reduction of electron rich pyrroles. Results The partial reduction of bicyclic α-ketopyrrole derivatives has been performed under dissolving metal conditions with zinc and hydrochloric acid to give excellent yields of hexahydroindolizidines. This reduction method has been utilised for the diastereoselective synthesis of 5-alkylindolizidines and the stereoselectivity obtained is opposite to that of catalytic hydrogenation. Conclusion An efficient stereoselective synthesis of indolizidine alkaloids has been developed from α-ketopyrrole intermediates using a modified version of Knorr and Rabe's pyrrole reduction.

  10. Conducting polymers of decanedioic acid bis-(4-pyrrol-1-yl-phenyl) ester

    International Nuclear Information System (INIS)

    Cirpan, A.; Guner, Y.; Toppare, L.

    2004-01-01

    A dipyrrolyl monomer was synthesized via the reaction between 4-pyrrol-1-yl phenol and decanedioyl dichloride. The electrochemical behavior of this monomer was studied. Polymerization of decanedioic acid bis-(4-pyrrol-1-yl-phenyl) ester (DAPE) was achieved by chemical and constant current electrolyses methods. Copolymerization of DAPE with thiophene was performed by constant potential electrolysis in acetonitrile-tetrabutylammonium tetrafluoroborate (TBAFB), dichloromethane-TBAFB, solvent-electrolyte couples. The chemical structures and properties were investigated by Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy, differential scanning calorimetry and thermal gravimetry analysis. The conductivities of the samples were measured by a four-probe technique

  11. Conducting polymers of decanedioic acid bis-(4-pyrrol-1-yl-phenyl) ester

    Energy Technology Data Exchange (ETDEWEB)

    Cirpan, A.; Guner, Y.; Toppare, L

    2004-05-15

    A dipyrrolyl monomer was synthesized via the reaction between 4-pyrrol-1-yl phenol and decanedioyl dichloride. The electrochemical behavior of this monomer was studied. Polymerization of decanedioic acid bis-(4-pyrrol-1-yl-phenyl) ester (DAPE) was achieved by chemical and constant current electrolyses methods. Copolymerization of DAPE with thiophene was performed by constant potential electrolysis in acetonitrile-tetrabutylammonium tetrafluoroborate (TBAFB), dichloromethane-TBAFB, solvent-electrolyte couples. The chemical structures and properties were investigated by Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy, differential scanning calorimetry and thermal gravimetry analysis. The conductivities of the samples were measured by a four-probe technique.

  12. Self-Aggregation in Pyrrole:  Matrix Isolation, Solid State Infrared Spectroscopy, and DFT Study

    OpenAIRE

    Gómez-Zavaglia, Andrea; Fausto, Rui

    2004-01-01

    Pyrrole (C4H5N) was embedded in low-temperature solid inert matrixes (argon, xenon; T = 9 K) and both the monomer and low-order aggregates characterized by FTIR spectroscopy. The spectroscopic studies were complemented by extensive theoretical [DFT(B3LYP)/6-311++G(d,p)] structural and vibrational studies carried out for the monomer and their self-aggregates (up to four units). The calculated spectrum for monomeric pyrrole fits well those obtained immediately after deposition (at 9 K) of dilut...

  13. Metallation of N-allenylpyrroles by superbase reagents. Synthesis of new N-substituted pyrroles

    International Nuclear Information System (INIS)

    Tarasova, O.A.; Brandsma, L.; Verkrajsse, Kh.D.; Mal'kina, A.G.; Trofimov, B.A.

    1996-01-01

    Metallation of N-allenylpyrrole by BuLi-Et 2 O (THP), BuLi-t-BuOK-THP superbases and reactions of carbanions formed with different electrophilic agents have been studied. Fundamental data on mutual influence of allene group and pyrrole ring have been obtained. Alpha-proton features the highest acidity and it is the first one to be replaced by metal. In BuLi excess (more than 3-fold) in ether or in BuLi-t-BuOK-THP system a through metallation of allene group occurs. New pyrroles functionally substituted in allene chain have been prepared. 19 refs.; 3 tabs

  14. 5-Imino-3,4-diphenyl-1H-pyrrol-2-one

    Science.gov (United States)

    Bulatov, Evgeny; Chulkova, Tatiana; Haukka, Matti

    2014-01-01

    The title compound, C16H12N2O, exists in the crystalline state as the 5-imino-3,4-di­phenyl­-1H-pyrrol-2-one tautomer. The dihedral angles between the pyrrole and phenyl rings are 35.3 (2) and 55.3 (2)°. In the crystal, inversion dimers linked by pairs of N—H⋯N hydrogen bonds generate a graph-set motif of R 2 2(8) via N—H⋯N hydrogen bonds. PMID:24764881

  15. 5-Imino-3,4-diphenyl-1H-pyrrol-2-one

    Directory of Open Access Journals (Sweden)

    Evgeny Bulatov

    2014-02-01

    Full Text Available The title compound, C16H12N2O, exists in the crystalline state as the 5-imino-3,4-diphenyl-1H-pyrrol-2-one tautomer. The dihedral angles between the pyrrole and phenyl rings are 35.3 (2 and 55.3 (2°. In the crystal, inversion dimers linked by pairs of N—H...N hydrogen bonds generate a graph-set motif of R22(8 via N—H...N hydrogen bonds.

  16. Self-Assembly of Dimeric Tetrathiafulvalene-Calix 4 pyrrole: Receptor for 1,375-Trinitrobenzene

    DEFF Research Database (Denmark)

    Nielsen, K. A.; Stein, P. C.

    2011-01-01

    The synthesis and binding properties of a tetrathiafulvalene (TTF)-calix[4]pyrrole receptor 2 appended with one 3,5-dinitrobenzoate guest moiety are reported. The preliminary studies revealed that the receptor is self-compiexing into a dimer receptor 2 center dot 2. The self-complexation of the r......The synthesis and binding properties of a tetrathiafulvalene (TTF)-calix[4]pyrrole receptor 2 appended with one 3,5-dinitrobenzoate guest moiety are reported. The preliminary studies revealed that the receptor is self-compiexing into a dimer receptor 2 center dot 2. The self...

  17. Strapped Calix[4]pyrroles Bearing an 1,3-Indanedione at a β-Pyrrolic Position: Chemodosimeters for the Cyanide Anion

    Science.gov (United States)

    Kim, Sook-Hee; Hong, Seong-Jin; Yoo, Jaeduk; Kim, Sung Kuk; Sessler, Janathan L.; Lee, Chang-Hee

    2014-01-01

    A strapped calix[4]pyrrole bearing an 1,3-indanedione group at a β-pyrrolic position has been synthesized and studied as a ratiometric cyanide selective chemosensor. A concentration-dependent bleaching of the initial yellow color was observed upon addition of the cyanide anion. The bleaching, which was observed exclusively with the cyanide anion, occurred even in the presence of other anions. Spectroscopic studies provides support for a mechanistic interpretation wherein the cyanide anion forms a complex with the receptor (K = 2.78 × 104 M-1) through a fast equilibrium, which is followed by slow nucleophilic addition to the β-position of the 1,3-indanedione group. A minimum inhibitory effect from other anions was observed, a feature that could be beneficial in the selective sensing of the cyanide anion. PMID:19639968

  18. Hydrolytic study of the copolymer Poly pyrrole/ Polyethyleneglycol and Poly pyrrole synthesized by plasma; Estudio hidrolitico del copolimero polipirrol/polietilenglicol y polipirrol sintetizado por plasma

    Energy Technology Data Exchange (ETDEWEB)

    Colin, E.; Enriquez, M.A.; Olayo, M.G.; Cruz, G.J.; Carapia, L.; Romero, M. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico); Morales, J.; Olayo, R. [UAM-I, A.P. 55-534 Iztapalapa, Mexico D.F. (Mexico)

    2006-07-01

    In this work the study about the hydrolytic compatibility of semiconductor polymers, copolymer Poly pyrrole/ Polyethyleneglycol (PPy/PEG) and Poly pyrrole (PPy) for their possible use as biomaterials. The polymers were synthesized by plasma between 10 and 100 W, with discharges of splendor RF to 13.5 MHz with resistive coupling. The hydrolytic affinity was evaluated calculating the contact angle with solutions of NaCl, NaCl-MgSO{sub 4} and Krebs-Ringer. The results show a hydrophilicity increment due to the increase of the surface ruggedness with the synthesis energy. On the contrary, the crystallinity diminishes when increasing the power in PPy and it stays approximately constant in PPy/PEG. The electric conductivity presents a growth from 2 to 4 magnitude orders in function of the water content in the polymers. (Author)

  19. Effect of alkali metal ions on the pyrrole and pyridine π-electron systems in pyrrole-2-carboxylate and pyridine-2-carboxylate molecules: FT-IR, FT-Raman, NMR and theoretical studies

    Science.gov (United States)

    Świderski, G.; Wojtulewski, S.; Kalinowska, M.; Świsłocka, R.; Lewandowski, W.

    2011-05-01

    The FT-IR, FT-Raman and 1H and 13C NMR spectra of pyrrole-2-carboxylic acid (PCA) and lithium, sodium, potassium, rubidium and caesium pyrrole-2-carboxylates were recorded, assigned and compared in the Li → Na → K → Rb → Cs salt series. The effect of alkali metal ions on the electronic system of ligands was discussed. The obtained results were compared with previously reported ones for pyridine-2-carboxylic acid and alkali metal pyridine-2-carboxylates. Calculations for pyrrole-2-carboxylic acid and Li, Na, K pyrrole-2-carboxylates in B3LYP/6-311++G ** level and Møller-Plesset method in MP2/6-311++G ** level were made. Bond lengths, angles and dipole moments as well as aromaticity indices (HOMA, EN, GEO, I 6) for the optimized structures of pyrrole-2-carboxylic acid (PCA) and lithium, sodium, potassium pyrrole-2-carboxylates were also calculated. The degree of perturbation of the aromatic system of ligand under the influence of metals in the Li → Cs series was investigated with the use of statistical methods (linear correlation), calculated aromaticity indices and Mulliken, NBO and ChelpG population analysis method. Additionally, the Bader theory (AIM) was applied to setting the characteristic of the bond critical points what confirmed the influence of alkali metals on the pyrrole ring.

  20. One-pot Synthesis of Substituted Pyrroles with N,N,N',N'

    African Journals Online (AJOL)

    In this research, N,N,N'N'-tetrachlorobenzene-1,3-disulphonamide as novel catalytic reagent and N,N'-diiodo-N,N'-1,2-ethanediylbis(p-toluenesulphonamide) as new catalyst were used for the synthesis of N-substituted pyrroles in good to excellent yields under mild conditions. These reusable reagents were compared with ...

  1. Copper-promoted oxidative coupling of enamides and alkynes for the synthesis of substituted pyrroles.

    Science.gov (United States)

    Zhao, Mi-Na; Ren, Zhi-Hui; Wang, Yao-Yu; Guan, Zheng-Hui

    2014-02-10

    An efficient copper-promoted oxidative coupling of enamides with alkynes has been developed for the synthesis of substituted pyrroles. The reaction proceeded through C-H and N-H bond functionalization of enamides under mild conditions. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Synthesis and characterization of N-t-BOC protected pyrrole-sulfur oligomers and polymers

    NARCIS (Netherlands)

    Groenendaal, L.; Pieterse, K.; Vekemans, J.A.J.M.; Meijer, E.W.

    1997-01-01

    The synthesis and characterization of a new class of pyrrole-sulfur compounds is described. These compounds are designed to be precursors for an organic analogue of poly(sulfur nitride). Poly(N-t-BOC-2.5-pyrrolyl sulfide) was prepared from N-t-BOC-2,5-dibromopyrrole by first lithiating this compound

  3. A Bis-Calix[4]pyrrole Enzyme Mimic that Constrains Two Oxoanions in Close Proximity

    DEFF Research Database (Denmark)

    He, Qing; Kelliher, Michael; Bähring, Steffen

    2017-01-01

    Herein we describe a large capsule-like bis-calix[4]pyrrole 1 , that is able to host concurrently two dihydrogen phosphate anions within a relatively large internal cavity. Evidence for the concurrent, dual recognition of the encapsulated anions came from 1H NMR and UV-vis spectroscopies and ITC ...

  4. Interaction of cesium ions with calix[2]furan[4]pyrrole and its fluoride complex

    Czech Academy of Sciences Publication Activity Database

    Kříž, Jaroslav; Dybal, Jiří; Makrlík, E.; Kohnke, F. H.

    2012-01-01

    Roč. 541, 10 July (2012), s. 27-31 ISSN 0009-2614 Institutional research plan: CEZ:AV0Z40500505 Institutional support: RVO:61389013 Keywords : calix[2]furan[4]pyrrole * Cs complex * NMR Subject RIV: CD - Macromolecular Chemistry Impact factor: 2.145, year: 2012

  5. Structure and Oxidation of Pyrrole Adducts Formed between Aflatoxin B2a and Biological Amines.

    Science.gov (United States)

    Rushing, Blake R; Selim, Mustafa I

    2017-06-19

    Aflatoxin B 2a has been shown to bind to proteins through a dialdehyde intermediate under physiological conditions. The proposed structure of this adduct has been published showing a Schiff base interaction, but adequate verification using structural elucidation instrumental techniques has not been performed. In this work, we synthesized the aflatoxin B 2a amino acid adduct under alkaline conditions, and the formation of a new product was determined using high performance liquid chromatography-time-of-flight mass spectrometry. The resulting accurate mass was used to generate a novel proposed chemical structure of the adduct in which the dialdehyde forms a pyrrole ring with primary amines rather than the previously proposed Schiff base interaction. The pyrrole structure was confirmed using 1 H, 13 C, correlation spectroscopy, heteronuclear single quantum correlation, and heteronuclear multiple bond correlation NMR and tandem mass spectrometry. Reaction kinetics show that the reaction is overall second order and that the rate increases as pH increases. Additionally, this study shows for the first time that aflatoxin B 2a dialdehyde forms adducts with phosphatidylethanolamines and does so through pyrrole ring formation, which makes it the first aflatoxin-lipid adduct to be structurally identified. Furthermore, oxidation of the pyrrole adduct produced a product that was 16 m/z heavier. When the aflatoxin B 2a -lysine (ε) adduct was oxidized, it gave a product with an accurate mass, mass fragmentation pattern, and 1 H NMR spectrum that match aflatoxin B 1 -lysine, which suggest the transformation of the pyrrole ring to a pyrrolin-2-one ring. These data give new insight into the fate and chemical properties of biological adducts formed from aflatoxin B 2a as well as possible interferences with known aflatoxin B 1 exposure biomarkers.

  6. Use of Graphite Oxide and Graphene Oxide as Catalysts in the Synthesis of Dipyrromethane and Calix[4]pyrrole

    Directory of Open Access Journals (Sweden)

    Sweta Mishra

    2011-08-01

    Full Text Available Graphite oxide and graphene oxides have been used as solid catalysts for the synthesis of 5,5-dialkyldipyrromethanes and calix[4]pyrroles in organic and aqueous solutions at room temperature.

  7. Efficient assembly of polysubstituted pyrroles via a (3 + 2) cycloaddition/skeletal rearrangement/redox isomerization cascade reaction.

    Science.gov (United States)

    Yu, Yuanyuan; Wang, Chunyu; He, Xinze; Yao, Xiaotong; Zu, Liansuo

    2014-07-03

    An unprecedented cascade strategy, used in conjunction with a redox isomerization, for the synthesis of 3-allyl pyrroles is reported. In a single step, readily accessible simple starting materials are transformed into highly substituted pyrroles with high efficiency. The products obtained contain allyl substituents, which can be readily elaborated to other useful functional groups. The reaction proceeds through an unusual (3 + 2) cycloaddition/skeletal rearrangement/redox isomerization pathway.

  8. Graphene/Poly(aniline-co-pyrrole) Nanocomposite: Potential Candidate for Supercapacitor and Microwave Absorbing Applications.

    Science.gov (United States)

    Sahoo, Sumanta; Bhattacharya, Pallab; Dhibar, Saptarshi; Hatui, Goutam; Das, Tanya; Das, Chapal Kumar

    2015-09-01

    A simple and cost-effective in-situ chemical route to prepare the nanocomposites based on graphene and Poly(aniline-co-pyrrole) [PPP] has been proposed. Introduction of graphene changes the morphology of copolymer from spherical to fiber like. Graphene/Poly(aniline-co-pyrrole) [GPPP] nanocomposite achieved highest specific capacitance of 351 F/g and energy density of 124.8 Wh/Kg at 10 mV/s scan rate. The composite also obtained moderate specific capacitance retention of 66% after 500 cycles, which establish its potentiality as supercapacitor electrode materials. The composite also exhibited high electrical conductivity and superior microwave absorbing properties (maximum reflection loss is -29.97 dB). The absorption range corresponding to ≥ 90% absorption (or -10 dB) is 2.72 GHz which is excellent for the microwave absorbing applications.

  9. Biofunctionalization of multiwalled carbon nanotubes by irradiation of electropolymerized poly(pyrrole-diazirine) films.

    Science.gov (United States)

    Papper, Vladislav; Gorgy, Karine; Elouarzaki, Kamal; Sukharaharja, Ayrine; Cosnier, Serge; Marks, Robert S

    2013-07-15

    A photoactivatable poly(pyrrole-diazirine) film was synthesized and electropolymerized as a versatile tool for covalent binding of laccase and glucose oxidase on multiwalled carbon nanotube coatings and Pt, respectively. Irradiation of the functionalized nanotubes allowed photochemical grafting of laccase and its subsequent direct electrical wiring, as illustrated by the electrocatalytic reduction of oxygen. Moreover, covalent binding of glucose oxidase as model enzyme, achieved by UV activation of electropolymerized pyrrole-diazirine, allowed a glucose biosensor to be realized. This original method to graft biomolecules combines electrochemical and photochemical techniques. The simplicity of this new method allows it to be extended easily to other biological systems. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. A C{sub 2}-symmetric ratiometric fluorescence and colorimetric anion sensor based on pyrrole derivative

    Energy Technology Data Exchange (ETDEWEB)

    Liu Ge [Department of Chemistry, Chifeng University, Chifeng 024000 (China); Shao Jie, E-mail: njshao@live.c [Department of Chemistry and Materials Science, Nanjing Forestry University, Nanjing 210037 (China)

    2011-07-15

    A C{sub 2}-symmetric fluorescence and colorimetric anion sensor (1) based on pyrrole derivative was designed and synthesized according to binding site-signaling subunit approach. The compound 1 was easily prepared by reaction of pyrrole-2,5-dicarboxaldehyde with 4-nitrophenylhydrazine in ethanol (yield=78%). In DMSO, the sensor 1 exhibited a visible color change from red to brown upon exposure to anions such as AcO{sup -} and F{sup -}; however, no obvious color changes were observed when the other tested anions (e. g. H{sub 2}PO{sub 4}{sup -}, Cl{sup -}, Br{sup -} and I{sup -}) were added. There was a significant redshift ({Delta}{lambda}{sub max}=160 nm) in UV-vis spectrum during UV-vis spectral titrations. In particular, the sensor 1 showed ratiometric fluorescence responses to anions. - Highlights: {yields} C{sub 2}-symmetric fluorescence and colorimetric anion sensor based on pyrrole derivative was designed and synthesized according to binding site-signaling subunit approach. {yields} The sensor was easily prepared by reaction of pyrrole-2,5-dicarboxaldehyde with 4-nitrophenylhydrazine in ethanol (yield=78%). {yields} In DMSO, the sensor exhibited a visible color change from red to brown upon exposure to anions such as AcO{sup -} and F{sup -}, however, no obvious color changes were observed when the other anions tested (e. g. H{sub 2}PO{sub 4}{sup -}, Cl{sup -}, Br{sup -} and I{sup -}) were added. {yields} The sensor showed ratiometric fluorescence responses to anions.

  11. Towards physical interpretation of substituent effects: the case of N- and C3-substituted pyrrole derivatives

    Czech Academy of Sciences Publication Activity Database

    Zborowski, K. K.; Szatylowicz, H.; Stasyuk, Olga A.; Krygowski, T. M.

    2017-01-01

    Roč. 28, č. 4 (2017), s. 1223-1227 ISSN 1040-0400 Institutional support: RVO:61388963 Keywords : substituent effect * pyrrole derivatives * Hammett equation * charges of the substituent active region Subject RIV: CF - Physical ; Theoretical Chemistry OBOR OECD: Physical chemistry Impact factor: 1.582, year: 2016 https://link.springer.com/article/10.1007%2Fs11224-017-0938-7

  12. Very Strong Binding for a Neutral Calix[4]pyrrole Receptor Displaying Positive Allosteric Binding

    DEFF Research Database (Denmark)

    Duedal, Troels; Nielsen, Kent; Olsen, Gunnar

    2017-01-01

    . The tetrathiafulvalene (TTF) subunits in the tetraTTF-calix[4]pyrrole receptor 1 present a nearly perfect shape and electronic complementarity to the NTCDA guest, which was confirmed by X-ray crystal structure analysis, DFT calculations, and electron density surface mapping. The complexation results in formation...... of a charge transfer complex (22⊆1), that is visualized as a color change from yellow to brown....

  13. Morphology and electrical properties of electrochemically synthesized pyrrole–formyl pyrrole copolymer

    Energy Technology Data Exchange (ETDEWEB)

    Gholami, Mehrdad, E-mail: mehrdad897@um.edu.my [Department of Chemistry, University of Malaya, Kuala Lumpur 50603 (Malaysia); Department of Chemistry, Marvdasht Branch, Islamic Azad University, P.O. Box 465, Marvdasht (Iran, Islamic Republic of); Nia, Pooria Moozarm, E-mail: pooriamn@yahoo.com [Department of Chemistry, University of Malaya, Kuala Lumpur 50603 (Malaysia); Alias, Yatimah, E-mail: yatimah70@um.edu.my [Department of Chemistry, University of Malaya, Kuala Lumpur 50603 (Malaysia)

    2015-12-01

    Graphical abstract: - Highlights: • The (Py–co-FPy) copolymer was synthesized electrochemically. • This copolymer has 1.6 times higher surface coverage compared to polypyrrole. • This copolymer showed 2.5 times lower resistance compared to polypyrrole. • The conjugated structure between Py and FPy causes enhancement of conductivity. • This conducting copolymer has a strong potential to be used in various applications. - Abstract: A direct electrochemical copolymerization of pyrrole–formyl pyrrole (Py–co-FPy) was carried out by oxidative copolymerization of formyl pyrrole and pyrrole in LiClO{sub 4} aqueous solution through galvanostatic method. The (Py–co-FPy) copolymer was characterized using Fourier-transform infrared spectroscopy (FT-IR), field emission scanning electron microscope (FESEM), energy-filtering transmission electron microscope (EFTEM), thermal gravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The FESEM images showed that the synthesized copolymer had a hollow whelk-like helixes structure, which justifies the enhancement of charge transportation through the copolymer film. Cyclic voltammetry studies revealed that the electrocatalytic activity of synthesized copolymer has improved and the surface coverage in copolymer enhanced 1.6 times compared to polypyrrole alone. Besides, (Py–co-FPy) copolymer showed 2.5 times lower electrochemical charge transfer resistance (R{sub ct}) value in impedance spectroscopy. Therefore, this copolymer has a strong potential to be used in several applications such as sensor applications.

  14. Electrochemical synthesis of poly(pyrrole-co-o-anisidine)/chitosan composite films

    Science.gov (United States)

    Yalçınkaya, Süleyman; Çakmak, Didem

    2017-05-01

    In this study, poly(pyrrole-co-o-anisidine)/chitosan composite films were electrochemically synthesized in various monomers feed ratio (pyrrole: o-anisidine; 9:1, 7:3, 1:1, 3:7 and 1:9) of pyrrole and o-anisidine on the platinum electrode. Electrochemical synthesis of the composite films was carried out via cyclic voltammetry technique. They were characterized by FT-IR, cyclic voltammetry, SEM micrographs, digital images, TGA and DSC techniques. The SEM results indicated that the particle size of the composite decreased with increasing o-anisidine ratio and the films became more likely to be smooth morphology. The TGA results proved that the film of the composite with 1:1 ratio showed highest final degradation temperature and lowest weight loss (83%) compared to copolymer and 9:1 1:9 composite films. The 1:1 composite film had higher thermal stability than copolymer and the other composite films (9:1 1:9). Meanwhile, electrochemical studies exhibited that the 1/9 composite film had good electrochemical stability as well.

  15. The electrochemical synthesis of poly(pyrrole-co-o-anisidine) on 3102 aluminum alloy and its corrosion protection properties

    International Nuclear Information System (INIS)

    Mert, B. Dogru; Yazici, B.

    2011-01-01

    Research highlights: → The electrochemical synthesis of strongly adherent, uniform polypyrrole (PPy) and poly(pyrrole-co-o-anisidine) coatings were successfully achieved on 3102 aluminum alloy from 0.1 M monomer (pyrrole and pyrrole:o-anisidine, 8:2) containing oxalic acid by means of the cyclic voltammetry technique. → The results were showed that the water permeation of copolymer coating is lower than PPy. → This study was showed that copolymer is suitable coating for protection of 3102 Al alloy against corrosion. - Abstract: The electrochemical syntheses of polypyrrole (PPy) and poly(pyrrole-co-o-anisidine) were achieved on 3102 aluminum alloy (Al) from 0.1 M monomer (pyrrole:o-anisidine, 8:2) containing 0.4 M oxalic acid solution using the cyclic voltammetry technique. The synthesized films were characterized by FT-IR spectroscopy. The thermal stability of films was determined by thermogravimetric analysis (TGA) technique. Surface morphologies were characterized by scanning electron microscope (SEM) images. The potential of zero charge (pzc) of Al was determined using electrochemical impedance spectroscopy (EIS). The corrosion behavior of samples was investigated with open circuit potential (E ocp )-time, EIS, and anodic polarization techniques. It was found that copolymer coated Al provides better barrier property against of corrosion in 3.5% NaCl solution.

  16. Role of the ribose-specific marker furfuryl-amine in the formation of aroma active 1-(furan-2-ylmethyl)-1H-pyrrole (or furfuryl-pyrrole) derivatives.

    Science.gov (United States)

    Nikolov, Plamen Y; Yaylayan, Varoujan A

    2012-10-10

    Furfuryl-pyrroles possess a diverse range of organoleptic properties described as roasted, chocolaty, green, horseradish-like, and mushroom-like and are detected in various foods such as coffee, chocolate, popcorn, and roasted chicken. Although their origin in food was attributed to furfuryl-amine, the latter has not been detected so far in Maillard model systems or in foods. In this study, furfuryl-amine was shown to be formed specifically from ribose through nitrogen atom transfer from the α-amino group of any amino acid. Such a transfer can be achieved through decarboxylation of the Schiff base adduct and isomerization followed by hydrolysis. Through the use of (15)Nα-lysine it was revealed that only the (15)Nα nitrogen atom was incorporated into its structure, indicating a specific role for the carboxylate moiety in the mechanism of its formation. Furthermore, isotope labeling studies have indicated that furfuryl-pyrrole derivatives can be formed by the interaction of 2 mol of furfuryl-amine with 3-deoxyribosone followed by dehydration and cyclization to form 1-(furan-2-yl)-N-{[1-(furan-2-ylmethyl)-1H-pyrrol-2-yl]methylidene}methanamine. After hydrolysis, this intermediate can generate furfuryl-formyl-pyrrole, furfuryl-pyrrole carboxylic acid, and furfuryl-pyrrole. In this study, the furfuryl-amine derivatives were also detected in different coffee beans after pyrolysis and analysis by GC-MS. The potential of these compounds to form in aqueous model systems at a temperature of 120 °C was also demonstrated.

  17. Lipid-Lowering Effects of Ethyl 2-Phenacyl-3-aryl-1H-pyrrole- 4-carboxylates in Rodents

    Directory of Open Access Journals (Sweden)

    Bruce S. Burnham

    2004-02-01

    Full Text Available A series of substituted 2-phenacyl-3-phenyl-1H-pyrrole-4-carboxylates were prepared from substituted acetophenones in 6 steps. The final condensations between a chloroenal and an aminoketone were carried out under neutral conditions in parallel to yield the series listed below. Selected pyrrole derivatives proved to be potent hypolipidemic agents lowering serum triglyceride concentrations in CF-1 male mice after 14 days of I.P. administration. One agent orally lowered serum cholesterol in Sprague-Dawley male rats at 2mg/kg/day after 14 days. The agents demonstrated a lowering of mouse serum LDL- cholesterol levels and selected compounds showed an elevation of serum HDL-cholesterol levels. The cholesterol concentrations in the liver were raised while the cholesterol and triglyceride contents of the aorta were significantly lowered by the selected trisubstituted pyrrole.

  18. Blood Pyrrole-Protein Adducts--A Biomarker of Pyrrolizidine Alkaloid-Induced Liver Injury in Humans.

    Science.gov (United States)

    Ruan, Jianqing; Gao, Hong; Li, Na; Xue, Junyi; Chen, Jie; Ke, Changqiang; Ye, Yang; Fu, Peter Pi-Cheng; Zheng, Jiang; Wang, Jiyao; Lin, Ge

    2015-01-01

    Pyrrolizidine alkaloids (PAs) induce liver injury (PA-ILI) and is very likely to contribute significantly to drug-induced liver injury (DILI). In this study we used a newly developed ultra-high performance liquid chromatography-triple quadrupole-mass spectrometry (UHPLC-MS)-based method to detect and quantitate blood pyrrole-protein adducts in DILI patients. Among the 46 suspected DILI patients, 15 were identified as PA-ILI by the identification of PA-containing herbs exposed. Blood pyrrole-protein adducts were detected in all PA-ILI patients (100%). These results confirm that PA-ILI is one of the major causes of DILI and that blood pyrrole-protein adducts quantitated by the newly developed UHPLC-MS method can serve as a specific biomarker of PA-ILI.

  19. Electrochemical polymerization of pyrrole over AZ31 Mg alloy for biomedical applications

    International Nuclear Information System (INIS)

    Srinivasan, A.; Ranjani, P.; Rajendran, N.

    2013-01-01

    Highlights: ► Polymerization of pyrrole over AZ31 Mg was carried out using cyclic voltammetry. ► Pyrrole concentration was optimized to accomplish the adherent and uniform coating. ► Effect of monomer concentration on the surface morphology was discussed. ► Corrosion resistance of AZ31 Mg in SBF was studied as a function of Py concentration. ► PPy coated AZ31 Mg alloy exhibited enhanced corrosion resistance at 0.25 M of Py. -- Abstract: Electrochemical polymerization of pyrrole (Py) from aqueous salicylate solution over AZ31 Mg alloy was carried out using cyclic voltammetry (CV). The effect of monomer concentration on the surface and electrochemical corrosion in simulated body fluid (SBF) were analysed. Attenuated total reflection-infrared (ATR-IR) spectra showed the characteristic ring stretching peaks for polypyrrole (PPy). Scanning electron microscopy (SEM) and atomic force microscopy (AFM) studies exhibited typical cauliflower morphology with rough surface for PPy coated AZ31 Mg alloy. Open circuit potential measurement and potentiodynamic polarization studies revealed that the coating prepared using 0.25 M of Py had positive shift of about 120 mV in corrosion potential and lower corrosion current density (0.03 mA/cm 2 ) compared to other concentrations and uncoated AZ31 Mg alloy (0.25 mA/cm 2 ). Electrochemical impedance spectroscopic (EIS) studies of uncoated and PPy coated Mg alloy in SBF revealed three-time constants behaviour with about one order of increment in impedance value for 0.25 M of Py

  20. Tumor Repression of VCaP Xenografts by a Pyrrole-Imidazole Polyamide

    OpenAIRE

    Hargrove, Amanda E.; Martinez, Thomas F.; Hare, Alissa A.; Kurmis, Alexis A.; Phillips, John W.; Sud, Sudha; Pienta, Kenneth J; Dervan, Peter B.

    2015-01-01

    Pyrrole-imidazole (Py-Im) polyamides are high affinity DNA-binding small molecules that can inhibit protein-DNA interactions. In VCaP cells, a human prostate cancer cell line overexpressing both AR and the TMPRSS2-ERG gene fusion, an androgen response element (ARE)-targeted Py-Im polyamide significantly downregulates AR driven gene expression. Polyamide exposure to VCaP cells reduced proliferation without causing DNA damage. Py-Im polyamide treatment also reduced tumor growth in a VCaP mouse ...

  1. Synthesis and spectroscopic characterization of a fluorescent pyrrole derivative containing electron acceptor and donor groups

    Science.gov (United States)

    Almeida, A. K. A.; Monteiro, M. P.; Dias, J. M. M.; Omena, L.; da Silva, A. J. C.; Tonholo, J.; Mortimer, R. J.; Navarro, M.; Jacinto, C.; Ribeiro, A. S.; de Oliveira, I. N.

    2014-07-01

    The synthesis and fluorescence characterization of a new pyrrole derivative (PyPDG) containing the electron donor-acceptor dansyl substituent is reported. The effects of temperature and solvent polarity on the steady-state fluorescence of this compound are investigated. Our results show that PyPDG exhibits desirable fluorescent properties which makes it a promising candidate to be used as the photoactive material in optical thermometry and thermography applications. Further, the electrochemical and emission properties of polymeric films obtained from the oxidation polymerization of PyPDG are also analyzed.

  2. Kinetics of tritium isotope exchange between liquid pyrrole and gaseous hydrogen

    International Nuclear Information System (INIS)

    Stolarz, A.

    1994-01-01

    The kinetics of tritium isotope exchange between liquid pyrrole and gaseous hydrogen has been studied over the temperature range of 290-303 K. The reaction was carried out in the presence of platinum black but in spite of that, it appeared to be relatively slow. The kinetics of the exchange reaction studied could be described by the simple McKay equation. The results obtained suggest that diffusion is the rate-determining step. A mechanism of exchange is proposed. (author) 10 refs.; 2 figs.; 1 tab

  3. Synthesis and Physical Characterization of Carbon Nano tubes Coated by Conducting Poly pyrrole

    International Nuclear Information System (INIS)

    Talib, A.B.Z.A.; Wan Mahmood Mat Yunus; Kasar Behzad; Nayereh Soltani

    2011-01-01

    This study describes the preparation of poly pyrrole multi walled carbon nano tube (PPy/ MWNT) composites by in situ chemical oxidative polymerization. Various ratios of functionalized MWNTs are dispersed in the water, and PPy are then synthesized via in-situ chemical oxidative polymerization on the surface of the carbon nano tubes. The morphology of the resulting complex nano tubes (MWNT-PPY) was characterized by scanning electron microscopy (SEM). The conductivity of each composite showed a maximum in the temperature scale of 120- 160 degree Celsius and then decreased dramatically with the increase of temperature. (author)

  4. Ultrasound-assisted green synthesis of pyrroles and pyridazines in water via three-component condensation reactions of arylglyoxals

    Directory of Open Access Journals (Sweden)

    Bagher Eftekhari-Sis

    2013-04-01

    Full Text Available A green and efficient method for the preparation of 5-aryl-4-hydroxy-2-methyl-1H-pyrrole-3-carboxylic acid esters and 6-aryl-3-methylpyridazine-4-carboxylic acid esters via three-component reaction of arylglyoxal hydrates with β-dicarbonyl compounds in the presence of ammonium acetate and hydrazine hydrate using water as solvent under ultrasonic irradiation was reported. The reactions proceeded rapidly and afforded the corresponding pyrroles and pyridazines in good to high yields in very short reaction time.

  5. Poly(1-(2-carboxyethyl)pyrrole)/polypyrrole composite nanowires for glucose biosensor

    International Nuclear Information System (INIS)

    Jiang Hairong; Zhang Aifeng; Sun Yanan; Ru Xiaoning; Ge Dongtao; Shi Wei

    2012-01-01

    A novel glucose biosensor based on poly(1-(2-carboxyethyl)pyrrole) (PPyCOOH)/polypyrrole (PPy) composite nanowires was developed by immobilizing glucose oxidase (GOD) on the nanowires via covalent linkages. The PPyCOOH/PPy composite nanowires were fabricated by a facile two-step electrochemical synthesis route. First, PPy nanowires were synthesized in phosphate buffer solution using organic sulfonic acid, p-toluenesulfonate acid, as soft-template. Then, PPyCOOH/PPy composite nanowires were obtained by polymerizing 1-(2-carboxyethyl)pyrrole onto PPy nanowires via electrochemical method. Scanning electron microscopic, FT-IR spectra, X-ray photoelectron spectroscopy and cyclic voltammograms were used to characterize the structural and electrical behaviors of the composite nanowires. The PPyCOOH/PPy composite nanowires exhibited uniform diameter, high reactive site (-COOH), large specific surface, excellent electroactivity and good adhesion to electrode. The glucose biosensor was constructed by covalently coupling GOD to the composite nanowires. The biosensor response was rapid (5 s), highly sensitive (33.6 μA mM −1 cm −2 ) with a wide linear range (up to 10.0 mM) and low detection limit (0.63 μM); it also exhibited high stability and specificity to glucose. The attractive electrochemical and structural properties of PPyCOOH/PPy composite nanowires suggested potential application for electrocatalysis and biosensor.

  6. Influencing the electronic interaction in diferrocenyl-1-phenyl-1H-pyrroles.

    Science.gov (United States)

    Hildebrandt, Alexander; Lang, Heinrich

    2011-11-28

    Functionalised diferrocenyl-1-phenyl-1H-pyrroles were synthesised using Negishi C,C cross-coupling reactions. The influence of different substituents at the phenyl moiety on the electronic interaction was studied using electrochemistry (cyclic and square-wave voltammetry) and spectro-electrochemistry (in situ UV/Vis-NIR spectroscopy). The ferrocenyl moieties gave rise to two sequential, reversible redox processes in each of the diferrocenyl-1-phenyl-1H-pyrroles. The observed ΔE(1/2) values (ΔE(1/2) = difference between first and second oxidation) range between 420 and 480 mV. A linear relationship between the Hammett constants σ of the substituents and the separation of the redox potentials exists. The NIR measurements confirm electronic communication between the iron centers as intervalence charge transfer (IVCT) absorptions were observed in the corresponding mixed-valent monocationic species. All compounds were classified as class II systems according to Robin and Day (M. B. Robin and P. Day, Adv. Inorg. Chem., 1967, 10, 247-423). The oscillator strength of the charge transfer transition highly depends on the electron donating or electron withdrawing character of the phenyl substituents. This enables direct tuning of the intermetallic communication by simple modification of the molecule's functional group. Hence, this series of molecules may be regarded as model compounds for single molecule transistors.

  7. Heterogeneous hydrogenation using stable and reusable calix[4]pyrrole fenced Pt nanoparticles and its mechanistic insight

    Science.gov (United States)

    Kongor, Anita; Panchal, Manthan; Athar, Mohd; Mehta, Viren; Bhatt, Keyur; Jha, P. C.; Jain, Vinod

    2018-04-01

    Novel calix[4]pyrrole encapsulated platinum nanoparticles (PtNPs) have been prepared in the aqueous medium using meso-tetra(methoxy) meso-tetra (4-phenoxy acetohydrazide) calix[4]pyrrole (MCPTH) as both reducing as well as the capping agent. The developed MCPTH-PtNPs nano-assembly has been characterized by HRTEM, XRD, XPS, TGA and FTIR methods. Grafting capability of MCPTH on PtNPs was envisaged by molecular dynamics simulations that renders towards the complemented role of ligand in capping the surface via metal-acceptor interactions. These nanoparticles have been exploited for chemoselective hydrogenation of nitroarenes using molecular hydrogen at room temperature. Supplemented computational and experimental apprehension clearly corroborates that hydrazide group remains in close contact with the surface and provides adequate coordination sites for the adsorption of nitrenes; required for hydrogenation. This catalytic approach can be conceived as an important tool for determining the electronic and structural influence on the catalytic activity which may open new vistas pertaining to the use of calix functionalized nanocatalyst.

  8. Acids and alkali resistant sticky superhydrophobic surfaces by one-pot electropolymerization of perfluoroalkyl alkyl pyrrole.

    Science.gov (United States)

    Nicolas, Mael

    2010-03-15

    Over the past few years, electropolymerization of semifluorinated monomers like thiophene or pyrrole has been used as a gentle and effective method to generate, in one step, stable superhydrophobic surfaces. The synthetic route mostly involves the coupling reaction between a carboxylic acid and an alcohol, using a carboxy group-activated reagent and a catalyst. As a consequence, the electroformed surfaces present high liquid repellency due to the concomitant effect of roughness and low surface energy. Nevertheless, the ester connector can be cleaved under acidic and basic conditions, preventing its use under a range of environmental conditions. To overcome this drawback, a new perfluoroalkyl alkyl pyrrole has been synthesized, the fluorinated segment being connected to the electropolymerizable part via an alkyl chain, and electropolymerized, leading to surfaces that exhibit a static contact angle with water superior to 150 degrees and no sliding angle, over a wide pH range and with a long lifetime. This represents the first example of a pure conducting polymer surface with sticky superhydrophobicity not only in pure water but also in corrosive solutions such as acids and bases, giving rise to new prospects in practical applications. 2009 Elsevier Inc. All rights reserved.

  9. Sustainable Pathways to Pyrroles through Iron-Catalyzed N-Heterocyclization from Unsaturated Diols and Primary Amines

    NARCIS (Netherlands)

    Yan, Tao; Barta, Katalin

    2016-01-01

    Pyrroles are prominent scaffolds in pharmaceutically active compounds and play an important role in medicinal chemistry. Therefore, the development of new, atom-economic, and sustainable catalytic strategies to obtain these moieties is highly desired. Direct catalytic pathways that utilize readily

  10. Cation-pi interaction of the univalent silver cation with meso-octamethylcalix[4]pyrrole: Experimental and theoretical study

    Czech Academy of Sciences Publication Activity Database

    Polášek, Miroslav; Kvíčala, J.; Makrlík, E.; Křížová, Věra; Vaňura, P.

    2017-01-01

    Roč. 1130, FEB 2017 (2017), s. 408-413 ISSN 0022-2860 Grant - others:GA MŠk(CZ) 20/2015; GA MŠk(CZ) LM2010005 Institutional support: RVO:61388955 Keywords : silver cation * meso-octamethylcalix[4]pyrrole * complexation Subject RIV: CF - Physical ; Theoretical Chemistry OBOR OECD: Physical chemistry Impact factor: 1.753, year: 2016

  11. Synthesis of novel synthetic intermediates from the reaction of benzimidazole and triazole carbenes with ketenimines and their application in the construction of spiro-pyrroles.

    Science.gov (United States)

    Mo, Jun-Ming; Ma, Yang-Guang; Cheng, Ying

    2009-12-07

    2-(2-Alkoxycarbonyl-1-arylamino-1-propenyl)benzimidazolium and 5-(2-alkoxycarbonyl-1-arylamino-1-propenyl)triazolium salts were synthesized in good yields from the reaction of benzimidazole and triazole carbenes with ketenimines. Upon treatment with a base, both salts were converted into novel 1,3-dipoles which underwent [3+2] cycloaddition reactions with electron-deficient alkynes and allenes to produce benzimidazole-spiro-pyrroles or triazole-spiro-pyrroles. This work provides novel synthons for the construction of multifunctional spiro-pyrrole derivatives that are not easy accessible by other synthetic methods and are potentially amenable to further transformations.

  12. Novel composite materials synthesized by the high-temperature interaction of pyrrole with layered oxide matrices

    Science.gov (United States)

    Pavel, Alexandru Cezar

    The initial goal of the research presented herein was to develop the very first synthetic metal---high-temperature superconductor ceramic composite material, in the specific form of a polypyrrole---Bi2Sr2CaCu 2O8+delta nanocomposite. In the course of scientific investigation, this scope was broadened to encompass structurally and compositionally similar layered bismuthates and simpler layered oxides. The latter substrates were prepared through novel experimental procedures that enhanced the chance of yielding nanostructured morphologies. The designed novel synthesis approaches yielded a harvest of interesting results that may be further developed upon their dissemination in the scientific community. High-temperature interaction of pyrrole with molybdenum trioxide substrates with different crystalline phases and morphologies led to the formation of the first members of a new class of heterogeneous microcomposites characterized by incomplete occupancy by the metal oxide core of the volume encapsulated by the rigid, amorphous permeable polymeric membrane that reproduces the volume of the initial grain of precursor substrate. The method may be applied for various heterogeneous catalyst substrates for the precise determination of the catalytically active crystallographic planes. In a different project, room-temperature, templateless impregnation of molybdenum trioxide substrates with different crystalline phases and morphologies by a large excess of silver (I) cations led to the formation of 1-D nanostructured novel Ag-Mo-O ternary phase in what may be the simplest experimental procedure available to date that has yielded a 1-D nanostructure, regardless the nature of the constituent material. Interaction of this novel ternary phase with pyrrole vapors at high reaction temperatures led to heterogeneous nanostructured composites that exhibited a silver nanorod core. Nanoscrolls of vanadium pentoxide xerogel were synthesized through a novel, facile reflux-based method that

  13. Tumor Repression of VCaP Xenografts by a Pyrrole-Imidazole Polyamide.

    Directory of Open Access Journals (Sweden)

    Amanda E Hargrove

    Full Text Available Pyrrole-imidazole (Py-Im polyamides are high affinity DNA-binding small molecules that can inhibit protein-DNA interactions. In VCaP cells, a human prostate cancer cell line overexpressing both AR and the TMPRSS2-ERG gene fusion, an androgen response element (ARE-targeted Py-Im polyamide significantly downregulates AR driven gene expression. Polyamide exposure to VCaP cells reduced proliferation without causing DNA damage. Py-Im polyamide treatment also reduced tumor growth in a VCaP mouse xenograft model. In addition to the effects on AR regulated transcription, RNA-seq analysis revealed inhibition of topoisomerase-DNA binding as a potential mechanism that contributes to the antitumor effects of polyamides in cell culture and in xenografts. These studies support the therapeutic potential of Py-Im polyamides to target multiple aspects of transcriptional regulation in prostate cancers without genotoxic stress.

  14. Emission and absorption of light in poly pyrrole synthesized by plasma

    International Nuclear Information System (INIS)

    Enriquez, M.A.; Colin, E.; Olayo, M.G.; Cruz, G.J.; Ordonez, E.; Benavides, R.; Morales, J.; Olayo, R.

    2007-01-01

    The poly pyrrole structure (PPy) consists of heterocyclic rings with conjugation that it depends on the intensity of the electric field applied during the synthesis, and its luminescence is related with the π-π * transitions of that conjugation. To irradiate with light of different wavelengths, the results indicate that the polymer absorbs in the interval from 290 to 700 nm and it emits between 450 and 470 nm. The basal conductivity of the polymers, without electromagnetic excitation, it was measured in 10 -15 S/cm, however, to interact with visible light it is increased approximately 10 times and when excite with UV light it is increased up to 3 magnitude orders. (Author)

  15. Lack of effect of deferoxamine, dimethyl sulfoxide, and catalase on monocrotaline pyrrole pulmonary injury

    Energy Technology Data Exchange (ETDEWEB)

    Bruner, L.H.; Johnson, K.; Carpenter, L.J.; Roth, R.A.

    1987-01-01

    Monocrotaline pyrrole (MCTP) is a reactive metabolite of the pyrrolizidine alkaloid monocrotaline. MCTP given intravenously to rats causes pulmonary hypertension and right ventricular hypertrophy. Lesions in lungs after MCTP treatment contain macrophages and neutrophils, which may contribute to the damage by generation of reactive oxygen metabolites. Rats were treated with MCTP and agents known to protect against oxygen radical-mediated damage in acute models of neutrophil-dependent lung injury. Rats received MCTP and deferoxamine mesylate (DF), dimethyl sulfoxide (DMSO), or polyethylene glycol-coupled catalase (PEG-CAT). MCTP/vehicle-treated controls developed lung injury manifested as increased lung weight, release of lactate dehydrogenase into the airway, and sequestration of SVI-labeled bovine serum albumin in the lungs. Cotreatment of rats with DF, DMSO, or PEG-CAT did not protect against the injury due to MCTP. These results suggest that toxic oxygen metabolites do not play an important role in the pathogenesis of MCTP-induced pulmonary injury.

  16. Gamma irradiation effect on polymers derived of pyrrole synthesized by plasma

    International Nuclear Information System (INIS)

    Lopez G, O. G.

    2013-01-01

    This work studies the effect of gamma irradiation at doses of 50, 100, 200, 400 and 800 kGy on polymers obtained from pyrrole synthesized by plasma. The evolution of the structure was studied by Fourier transform infrared spectroscopy (Ftir) and X-ray photoelectron spectroscopy (XPS). The Ftir spectra show that poly pyrroles have N-H, C-H, C=O, triple and consecutive double bonds in their structure. The irradiated polymers show the same chemical groups in their structure without significant changes. Nevertheless, a more detailed analysis by XPS allows the identification of superficial chemical states, such as: C=CH-C, C=CC-C, C-NH-C, C-NC-C, etc., and shows that most of these states are present in all polymers but with different participation. One possible mechanism indicates that as the irradiation dose increases, dehydrogenation processes are performed increasing fragmentation, crosslinking and formation of multiple bonds. The fragmentation and thermal degradation were studied by thermogravimetric analysis, indicating that the loss of moisture and light compounds formed during gamma irradiation occurs in the firsts 100 grades C. The main degradation of all polymers occurs from 150 to 700 grades C, suggesting that the thermal stability is independent of the irradiation dose in the interval studied. Morphology was studied using scanning electron microscopy techniques. Before irradiation, the polymer presented a uniform and practically smooth surface, however, after gamma irradiation, the applied energy increased roughness and macro fragmentation. The roughness and functional groups on the surface reduced the contact angle with water as the irradiation dose increased. However, the polymers are hydrophilic, because for all doses that contact angle is smaller than 90 grades C. Electrical conductivity was calculated respect to temperature in the interval from 25 to 100 grades C. Conductivity increases with temperature and is slightly greater in the irradiated polymers

  17. Catalytic formal [2+2+1] synthesis of pyrroles from alkynes and diazenes via Ti(II)/Ti(IV) redox catalysis.

    Science.gov (United States)

    Gilbert, Zachary W; Hue, Ryan J; Tonks, Ian A

    2016-01-01

    Pyrroles are structurally important heterocycles. However, the synthesis of polysubstituted pyrroles is often challenging. Here, we report a multicomponent, Ti-catalysed formal [2+2+1] reaction of alkynes and diazenes for the oxidative synthesis of penta- and trisubstituted pyrroles: a nitrenoid analogue to classical Pauson-Khand-type syntheses of cyclopentenones. Given the scarcity of early transition-metal redox catalysis, preliminary mechanistic studies are presented. Initial stoichiometric and kinetic studies indicate that the mechanism of this reaction proceeds through a formally Ti(II)/Ti(IV) redox catalytic cycle, in which an azatitanacyclobutene intermediate, resulting from [2+2] alkyne + Ti imido coupling, undergoes a second alkyne insertion followed by reductive elimination to yield pyrrole and a Ti(II) species. The key component for catalytic turnover is the reoxidation of the Ti(II) species to a Ti(IV) imido via the disproportionation of an η(2)-diazene-Ti(II) complex.

  18. SPECTROSCOPIC STUDY OF EFFECTS OF TETRAALKYLAMMONIUM CATIONS ON F--SENSING PROPERTIES OF CALIX[4]PYRROLE BORADIAZAINDACENE DYE

    Directory of Open Access Journals (Sweden)

    Yongjun Lv

    Full Text Available A novel meso-tetracyclohexylcalix[4]pyrrole-based boradiazaindacene dye 3 was synthesized and characterized. F--binding properties of the dye in the presence of tetrabutylammonium (TBA+, tetraethylammonium (TEA+, and tetramethylammonium (TMA+ counter ions were investigated by UV-Vis, fluorescence, and NMR spectroscopies. Dye 3 displayed various degrees of absorption red shift, fluorescence quenching, and downfield shifts of NH signals for the three fluoride salts. The association constants of these salts mainly depend on cation size effects and ion-pairing effects and were in the order KTMA+ > KTEA+ > KTBA+. Thus, we speculate that both F- and tetraalkylammonium cations are concomitantly located above and below a bowl-shaped calix[4]pyrrole cup in an ion-paired complex, respectively.

  19. Ethyl 5-cyano-4-[2-(2,4-dichlorophenoxyacetamido]-1-phenyl-1H-pyrrole-3-carboxylate

    Directory of Open Access Journals (Sweden)

    Jing Xu

    2009-08-01

    Full Text Available In the title compound, C22H17Cl2N3O4, the pyrrole ring and the 2,4-dichlorophenyl group form a dihedral angle of 8.14 (13°; the phenyl ring is twisted with respect to the pyrrole ring, forming a dihedral angle of 60.77 (14°. The C=O bond length is 1.213 (3 Å, indicating that the molecule is in the keto form, associated with a –CONH– group, and the amide group adopts the usual trans conformation. The molecule is stabilized by an intramolecular N—H...O hydrogen-bonding interaction. In the crystal, the stacked molecules exhibit intermolecular C—H...O and C—H...N hydrogen-bonding interactions.

  20. Preparation and enhanced electrochemical properties of nano-sulfur/poly(pyrrole-co-aniline) cathode material for lithium/sulfur batteries

    International Nuclear Information System (INIS)

    Qiu Linlin; Zhang Shichao; Zhang Lan; Sun, Mingming; Wang Weikun

    2010-01-01

    Poly(pyrrole-co-aniline) (PPyA) copolymer nanofibers were prepared by chemical oxidation method with cetyltrimethyl ammonium chloride (CTAC) as template, and the nano-sulfur/poly(pyrrole-co-aniline) (S/PPyA) composite material in lithium batteries was achieved via co-heating the mixture of PPyA and sublimed sulfur at 160 deg. C for 24 h. The component and structure of the materials were characterized by FTIR, Raman, XRD, and SEM. PPyA with nanofiber network structure was employed as a conductive matrix, adsorbing agent and firm reaction chamber for the sulfur cathode materials. The nano-dispersed composite exhibited a specific capacity up to 1285 mAh g -1 in the initial cycle and remained 866 mAh g -1 after 40 cycles.

  1. Regioselective C2 Oxidative Olefination of Indoles and Pyrroles through Cationic Rhodium(III)-Catalyzed C-H Bond Activation.

    Science.gov (United States)

    Li, Bin; Ma, Jianfeng; Xie, Weijia; Song, Haibin; Xu, Shansheng; Wang, Baiquan

    2013-09-02

    Be economic with your atoms! An efficient Rh-catalyzed oxidative olefination of indoles and pyrroles with broad substrate scope and tolerance is reported. The catalytic reaction proceeds with excellent regio- and stereoselectivity. The directing group N,N-dimethylcarbamoyl was crucial for the reaction and could be removed easily. Copyright © 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Direct detection of pyridine formation by the reaction of CH (CD) with pyrrole: a ring expansion reaction

    Energy Technology Data Exchange (ETDEWEB)

    Soorkia, Satchin; Taatjes, Craig A.; Osborn, David L.; Selby, Talitha M.; Trevitt, Adam J.; Wilson, Kevin R.; Leone, Stephen R.

    2010-03-16

    The reaction of the ground state methylidyne radical CH (X2Pi) with pyrrole (C4H5N) has been studied in a slow flow tube reactor using Multiplexed Photoionization Mass Spectrometry coupled to quasi-continuous tunable VUV synchrotron radiation at room temperature (295 K) and 90 oC (363 K), at 4 Torr (533 Pa). Laser photolysis of bromoform (CHBr3) at 248 nm (KrF excimer laser) is used to produce CH radicals that are free to react with pyrrole molecules in the gaseous mixture. A signal at m/z = 79 (C5H5N) is identified as the product of the reaction and resolved from 79Br atoms, and the result is consistent with CH addition to pyrrole followed by Helimination. The Photoionization Efficiency curve unambiguously identifies m/z = 79 as pyridine. With deuterated methylidyne radicals (CD), the product mass peak is shifted by +1 mass unit, consistent with the formation of C5H4DN and identified as deuterated pyridine (dpyridine). Within detection limits, there is no evidence that the addition intermediate complex undergoes hydrogen scrambling. The results are consistent with a reaction mechanism that proceeds via the direct CH (CD) cycloaddition or insertion into the five-member pyrrole ring, giving rise to ring expansion, followed by H atom elimination from the nitrogen atom in the intermediate to form the resonance stabilized pyridine (d-pyridine) molecule. Implications to interstellar chemistry and planetary atmospheres, in particular Titan, as well as in gas-phase combustion processes, are discussed.

  3. Pyrrole PMOs, incorporating new N-heterocyclic compounds on an ethene-PMO through Diels–Alder reactions

    Energy Technology Data Exchange (ETDEWEB)

    Esquivel, Dolores; De Canck, Els [Center for Ordered Materials, Organometallics and Catalysis, Department of Inorganic and Physical Chemistry, Ghent University, Krijgslaan 281-S3, 9000 Ghent (Belgium); Jiménez-Sanchidrián, César [Department of Organic Chemistry, Nanochemistry and Fine Chemistry Research Institute (IUIQFN), Faculty of Sciences, University of Córdoba, Campus de Rabanales, Marie Curie Building, Ctra. Nnal. IV, km 396, 14071 Córdoba (Spain); Romero-Salguero, Francisco J., E-mail: qo2rosaf@uco.es [Department of Organic Chemistry, Nanochemistry and Fine Chemistry Research Institute (IUIQFN), Faculty of Sciences, University of Córdoba, Campus de Rabanales, Marie Curie Building, Ctra. Nnal. IV, km 396, 14071 Córdoba (Spain); Van Der Voort, Pascal, E-mail: pascal.vandervoort@ugent.be [Center for Ordered Materials, Organometallics and Catalysis, Department of Inorganic and Physical Chemistry, Ghent University, Krijgslaan 281-S3, 9000 Ghent (Belgium)

    2014-11-14

    The ethenylene bridges on the walls of an ethenylene-bridged periodic mesoporous organosilica were successfully modified with a variety of pyrrole derivatives – pyrrole, methylpyrrole, dimethylpyrrole, trimethylpyrrole and 1-phenylpyrrole – through Diels–Alder reactions. X-ray diffraction measurements and N{sub 2} adsorption–desorption analysis confirmed the preservation of the ordering and mesoporosity of the parent material as well as the decoration of the pores with the surface Diels–Alder adducts. Moreover, other techniques such as DRIFT, {sup 13}C and {sup 29}Si nuclear magnetic resonances revealed the formation of the surface N-heterocyclic compounds at the parent ethenylene sites. - Highlights: • Chemical modification of the double bonds on an ethene-PMO through the Diels–Alder reaction. • A family of pyrrole derivatives act as dienes in the Diels–Alder reaction. • Well-ordering and mesoporosity are retained after the post-functionalization. • N-containing compounds on the surface of ethene-PMO are present after the Diels–Alder reaction.

  4. Pyrrole PMOs, incorporating new N-heterocyclic compounds on an ethene-PMO through Diels–Alder reactions

    International Nuclear Information System (INIS)

    Esquivel, Dolores; De Canck, Els; Jiménez-Sanchidrián, César; Romero-Salguero, Francisco J.; Van Der Voort, Pascal

    2014-01-01

    The ethenylene bridges on the walls of an ethenylene-bridged periodic mesoporous organosilica were successfully modified with a variety of pyrrole derivatives – pyrrole, methylpyrrole, dimethylpyrrole, trimethylpyrrole and 1-phenylpyrrole – through Diels–Alder reactions. X-ray diffraction measurements and N 2 adsorption–desorption analysis confirmed the preservation of the ordering and mesoporosity of the parent material as well as the decoration of the pores with the surface Diels–Alder adducts. Moreover, other techniques such as DRIFT, 13 C and 29 Si nuclear magnetic resonances revealed the formation of the surface N-heterocyclic compounds at the parent ethenylene sites. - Highlights: • Chemical modification of the double bonds on an ethene-PMO through the Diels–Alder reaction. • A family of pyrrole derivatives act as dienes in the Diels–Alder reaction. • Well-ordering and mesoporosity are retained after the post-functionalization. • N-containing compounds on the surface of ethene-PMO are present after the Diels–Alder reaction

  5. Fabrication of calix[4]pyrrole nanofilms at the glassy carbon surface and their characterization by spectroscopic, optic and electrochemical methods

    International Nuclear Information System (INIS)

    Taner, Bilge; Ozcan, Emine; Ustuendag, Zafer; Keskin, Selda; Solak, Ali Osman; Eksi, Haslet

    2010-01-01

    meso-Octamethylcalix[4]pyrrole (CP) and meso-heptaethylcalix[4]pyrrole-meso-4-aminophenyl (4APCP) modified glassy carbon (GC) electrodes were prepared by the electrochemical oxidation in acetonitrile solution. Binding of the calix[4]pyrroles with the glassy carbon surface was investigated that it is through the etheric linkage revealed from the reflection-absorption infrared spectroscopy (RAIRS). Surface films of CP and 4APCP were investigated by cyclic voltammetry (CV), ellipsometry, X-ray photoelectron spectroscopy, RAIRS and the contact angle measurements. The thicknesses of the films were determined by ellipsometry which confirmed that the film was multilayer and homogeneous over the surface. Ellipsometric measurements also provided that the CP and 4APCP film thicknesses were 2.49 nm and 4.58 nm for 6 CV cycle modification, corresponding to 66 μF/cm 2 and 106 μF/cm 2 capacitances obtained by CV. The wetting behavior was examined by contact angle measurements and found that the hydrophobicity of the GC-4APCP surface was higher than that of GC-CP, probably due to the aromatic meso substituent present in the former.

  6. Fabrication of calix[4]pyrrole nanofilms at the glassy carbon surface and their characterization by spectroscopic, optic and electrochemical methods

    Energy Technology Data Exchange (ETDEWEB)

    Taner, Bilge; Ozcan, Emine [Selcuk University, Faculty of Science, Dept. of Chemistry, Konya (Turkey); Ustuendag, Zafer [Dumlupinar University, Faculty of Arts and Sciences, Dept. of Chemistry, Kuetahya (Turkey); Keskin, Selda [Middle East Technical University, Central Research Laboratory, Ankara (Turkey); Solak, Ali Osman, E-mail: osolak@science.ankara.edu.t [Ankara University, Faculty of Science, Department of Chemistry, Ankara (Turkey); Eksi, Haslet [Ankara University, Faculty of Science, Department of Chemistry, Ankara (Turkey)

    2010-10-29

    meso-Octamethylcalix[4]pyrrole (CP) and meso-heptaethylcalix[4]pyrrole-meso-4-aminophenyl (4APCP) modified glassy carbon (GC) electrodes were prepared by the electrochemical oxidation in acetonitrile solution. Binding of the calix[4]pyrroles with the glassy carbon surface was investigated that it is through the etheric linkage revealed from the reflection-absorption infrared spectroscopy (RAIRS). Surface films of CP and 4APCP were investigated by cyclic voltammetry (CV), ellipsometry, X-ray photoelectron spectroscopy, RAIRS and the contact angle measurements. The thicknesses of the films were determined by ellipsometry which confirmed that the film was multilayer and homogeneous over the surface. Ellipsometric measurements also provided that the CP and 4APCP film thicknesses were 2.49 nm and 4.58 nm for 6 CV cycle modification, corresponding to 66 {mu}F/cm{sup 2} and 106 {mu}F/cm{sup 2} capacitances obtained by CV. The wetting behavior was examined by contact angle measurements and found that the hydrophobicity of the GC-4APCP surface was higher than that of GC-CP, probably due to the aromatic meso substituent present in the former.

  7. Characterization of electrogenerated polypyrrole-benzophenone films coated on poly(pyrrole-methyl metacrylate) optic-conductive fibers.

    Science.gov (United States)

    Abu-Rabeah, Khalil; Atias, Danit; Herrmann, Sebastien; Frenkel, Julia; Tavor, Dorith; Cosnier, Serge; Marks, Robert S

    2009-09-01

    A conductive surface was created for the development of a biosensing platform via chemical polymerization of pyrrole onto the surface of poly(methyl methacrylate) (PMMA) fibers, with a subsequent electrogeneration of a photoactive linker pyrrole-benzophenone (PyBz) monomer on the fiber surface. Irradiation of the benzophenone groups embedded in the polypyrrole (Ppy) films by UV (350 nm) formed active radicals, allowing covalent attachment of the desired biomaterials. Characterization and optimization of this platform were carried out, with the platform showing conductive, stable, thin, controllable, and light-transmissible film features. Various parameters such as time deposition, process temperature, and activator plus pyrrole monomer concentrations were examined in the study. The morphology and permeability of the optic-fiber PMMA fibers were investigated to examine mass transfer ability. Cyclic voltammetry and amperometry techniques were applied to characterize the electrical features of the surface and charge transfer. The platform potential was then demonstrated by the construction of both amperometric and optical biosensors.

  8. Pyrrole Alkaloids with Potential Cancer Chemopreventive Activity Isolated from a Goji Berry-Contaminated Commercial Sample of African Mango

    Science.gov (United States)

    2015-01-01

    Bioassay-guided fractionation of a commercial sample of African mango (Irvingia gabonensis) that was later shown to be contaminated with goji berry (Lycium sp.) led to the isolation of a new pyrrole alkaloid, methyl 2-[2-formyl-5-(hydroxymethyl)-1H-pyrrol-1-yl]propanoate, 1, along with seven known compounds, 2–8. The structures of the isolated compounds were established by analysis of their spectroscopic data. The new compound 1g showed hydroxyl radical-scavenging activity with an ED50 value of 16.7 μM, whereas 4-[formyl-5-(methoxymethyl)-1H-pyrrol-1-yl]butanoic acid (2) was active in both the hydroxyl radical-scavenging (ED50 11.9 μM) and quinone reductase-induction [CD (concentration required to double QR activity) 2.4 μM)] assays used. The isolated compounds were shown to be absent in a taxonomically authenticated African mango sample but present in three separate authentic samples of goji berry (Lycium barbarum) using LC-MS and 1H NMR fingerprinting analysis, including one sample that previously showed inhibitory activity in vivo in a rat esophageal cancer model induced with N-nitrosomethylbenzylamine. Additionally, microscopic features characteristic of goji berry were observed in the commercial African mango sample. PMID:24792835

  9. A New Series of Pyrrole-Based Chalcones: Synthesis and Evaluation of Antimicrobial Activity, Cytotoxicity, and Genotoxicity

    Directory of Open Access Journals (Sweden)

    Ahmet Özdemir

    2017-11-01

    Full Text Available In an effort to develop new potent antimicrobial and anticancer agents, new pyrrole-based chalcones were designed and synthesized via the base-catalyzed Claisen-Schmidt condensation of 2-acetyl-1-methylpyrrole with 5-(arylfurfural derivatives. The compounds were evaluated for their in vitro antimicrobial effects on pathogenic bacteria and Candida species using microdilution and ATP luminescence microbial cell viability assays. MTT assay was performed to determine the cytotoxic effects of the compounds on A549 human lung adenocarcinoma, HepG2 human hepatocellular carcinoma, C6 rat glioma, and NIH/3T3 mouse embryonic fibroblast cell lines. 1-(1-Methyl-1H-pyrrol-2-yl-3-(5-(4-chlorophenylfuran-2-ylprop-2-en-1-one (7 and 1-(1-methyl-1H-pyrrol-2-yl-3-(5-(2,5-dichlorophenylfuran-2-ylprop-2-en-1-one (9 were found to be the most potent antifungal agents against Candida krusei and therefore these compounds were chosen for flow cytometry analysis and Ames MPF assay. ATP bioluminescence assay indicated that the antifungal activity of compounds 7 and 9 against C. krusei was significantly higher than that of other compounds and the reference drug (ketoconazole, whereas flow cytometry analysis revealed that the percentage of dead cells treated with compound 7 was more than that treated with compound 9 and ketoconazole. According to Ames MPF assay, compounds 7 and 9 were found to be non-genotoxic against TA98 and TA100 with/without metabolic activation. MTT assay indicated that 1-(1-methyl-1H-pyrrol-2-yl-3-(5-(2-nitrophenylfuran-2-ylprop-2-en-1-one (3 showed more selective anticancer activity than cisplatin against the HepG2 cell line. On the other hand, 1-(1-methyl-1H-pyrrol-2-yl-3-(5-(4-nitrophenylfuran-2-ylprop-2-en-1-one (1 was found to be more effective and selective on the A549 cell line than cisplatin.

  10. New 1H-pyrrole-2,5-dione derivatives as efficient organic inhibitors of carbon steel corrosion in hydrochloric acid medium: Electrochemical, XPS and DFT studies

    International Nuclear Information System (INIS)

    Zarrouk, A.; Hammouti, B.; Lakhlifi, T.; Traisnel, M.; Vezin, H.; Bentiss, F.

    2015-01-01

    Highlights: • 1H-pyrrole derivatives act as good corrosion inhibitors for carbon steel in 1 M HCl. • Adsorption of the inhibitors on carbon steel surface obeys Langmuir’s isotherm. • XPS showed that the inhibitors are chemisorbed on the metal surface. • Quantum chemical parameters were correlated with experimental results. - Abstract: New 1H-pyrrole-2,5-dione derivatives, namely 1-phenyl-1H-pyrrole-2,5-dione (PPD) and 1-(4-methylphenyl)-1H-pyrrole-2,5-dione (MPPD) were synthesised and their inhibitive action against the corrosion of carbon steel in 1 M HCl solution were investigated at 308 K by weight loss, potentiodynamic polarization curves, and electrochemical impedance spectroscopy (EIS) methods. The results showed that the investigated 1H-pyrrole-2,5-dione derivatives are good corrosion inhibitors for carbon steel in 1 M HCl medium, their inhibition efficiency increased with inhibitor concentration, and MPPD is slightly more effective than PPD. Potentiostatic polarization study showed that PPD and MPPD are mixed-type inhibitors in 1 M HCl. Impedance experimental data revealed a frequency distribution of the capacitance, simulated as constant phase element. The results obtained from electrochemical and weight loss studies were in reasonable agreement. The adsorption of MPPD and PPD on steel surface obeyed Langmuir’s adsorption isotherm. Thermodynamic data and XPS analysis clearly indicated that the adsorption mechanism of 1H-pyrrole-2,5-dione derivatives on carbon steel surface in 1 M HCl solution is mainly controlled by a chemisorption process. Quantum chemical calculations using the Density Functional Theory (DFT) were performed on 1H-pyrrole-2,5-dione derivatives to determine the relationship between molecular structures and their inhibition efficiencies

  11. Calix[2]pyreno[2]pyrrole as a Fluorescence Chemical Probe for Polynitroaromatics

    International Nuclear Information System (INIS)

    Park, Kyung Hwa; Yoo, Jae Duk; Lee, Chang Hee; Ka, Jae Won

    2012-01-01

    We have demonstrated that the new, readily synthesized and well characterized calix pyreno pyrrole fluorescence molecular probe can detect polynitroaromatic compounds with high affinity. In addition, this highly fluorescent neutral molecular receptor also exhibits enhanced binding affinity towards TNT which is associated with the formation of a pi-complex. The dynamic nature of the current system may enable it to serve as an excellent scaffold for electron-deficient guest molecular binding. Studies for other neutral molecules including metal ions are under in active progress. The elevated selectivity and sensitivity for specific analytes are the core requirements for an ideal chemical probes. A signal induced by guest binding must be sensitive enough so that accurate real time monitoring could be satisfactorily achieved. Introduction of signaling units at suitable places in which they can directly interact with the recognition events is critical in designing chemosensors. Among various signaling events, fluorescence changes are often applied for the sensitive detection of various analytes. An easy modulation of the photochemical properties of the signaling units is an additional advantage in compatibility and applications. Chemosensors for the detection of explosives becomes important due to their immediate applications in remedation of explosive manufacturing sites, homeland security or forensic sciences. With that in mind, numerous methods for the explosive detection have been reported in recent years. Nevertheless, some detection methods sometimes require sophisticated instrumentation which is not easy for on-site testing

  12. Lack of effect of deferoxamine, dimethyl sulfoxide, and catalase on monocrotaline pyrrole pulmonary injury

    International Nuclear Information System (INIS)

    Bruner, L.H.; Johnson, K.; Carpenter, L.J.; Roth, R.A.

    1987-01-01

    Monocrotaline pyrrole (MCTP) is a reactive metabolite of the pyrrolizidine alkaloid monocrotaline. MCTP given intravenously to rats causes pulmonary hypertension and right ventricular hypertrophy. Lesions in lungs after MCTP treatment contain macrophages and neutrophils, which may contribute to the damage by generation of reactive oxygen metabolites. Rats were treated with MCTP and agents known to protect against oxygen radical-mediated damage in acute models of neutrophil-dependent lung injury. Rats received MCTP and deferoxamine mesylate (DF), dimethyl sulfoxide (DMSO), or polyethylene glycol-coupled catalase (PEG-CAT). MCTP/vehicle-treated controls developed lung injury manifested as increased lung weight, release of lactate dehydrogenase into the airway, and sequestration of 125 I-labeled bovine serum albumin in the lungs. Cotreatment of rats with DF, DMSO, or PEG-CAT did not protect against the injury due to MCTP. These results suggest that toxic oxygen metabolites do not play an important role in the pathogenesis of MCTP-induced pulmonary injury

  13. Formation process of silver-polypyrrole coaxial nanocables synthesized by redox reaction between AgNO3 and pyrrole in the presence of poly(vinylpyrrolidone).

    Science.gov (United States)

    Chen, Aihua; Kamata, Kaori; Nakagawa, Masaru; Iyoda, Tomokazu; Haiqiao Wang, Haiqiao; Li, Xiaoyu

    2005-10-06

    We have recently demonstrated a one-step process to fabricate silver-polypyrrole (PPy) coaxial nanocables (Chen, A.; Wang, H.; Li, X. Chem. Commun. 2005, 14, 1863). The formation process of silver-PPy coaxial nanocables is discussed in this article. It was found from the results of TEM and SEM images that large numbers of silver atoms were formed when AgNO3 was added to a pyrrole solution. Then silver atoms transform to silver-PPy nanosheets with regular morphology, which will connect together to be more stable. Silver-PPy nanocables will be able to grow at the expense of the silver-PPy nanosheets. Poly(vinylpyrrolidone) (PVP) plays crucial roles in this process: as a capping agent to form silver nanowires, and as a dispersant of pyrrole monomers, which can influence the site at which pyrrole monomer exists. On the basis of experimental analysis, the possible mechanism was proposed. Because of the effect of PVP, silver ions and pyrrole monomers are apt to be adsorbed at the [111] and [100] facets of silver nanosheets, respectively. Obvious polymerization will take place on the boundary of the [111] and [100] facets. The PPy layer stays stable on the [100] facets. Meanwhile, newly formed silver atoms and silver nanosheets will further ripen and grow on the [111] facets. In a word, the morphology of final products and the formation process are determined by the reaction site between AgNO3 and the pyrrole monomer, which is influenced by PVP.

  14. Zinc hexacyanoferrate film as an effective protecting layer in two-step and one-step electropolymerization of pyrrole on zinc substrate

    International Nuclear Information System (INIS)

    Pournaghi-Azar, M.H.; Nahalparvari, H.

    2005-01-01

    The two-step and one-step electrosynthesis processes of polypyrrole (PPy) films on the zinc substrate are described. The two-step process includes (i) the zinc surface pretreatment with hexacyanoferrate ion in the aqueous medium in order to form a zinc hexacyanoferrate (ZnHCF) film non-blocking passive layer on the surface and with the view to prevent its reactivity and (ii) electropolymerization of pyrrole on the ZnHCF vertical bar Zn-modified electrode in aqueous pyrrole solution. In this context, both the non-electrolytic and electrolytic procedures were adapted, and the effect of some experimental conditions such as supporting electrolyte, pH and temperature of the solution at the zinc surface pretreatment step as well as pyrrole concentration and electrochemical techniques at the polymerization step was investigated. By optimizing the experimental conditions in both steps, we have obtained a homogeneous and strongly adherent PPy films on the zinc substrate. The one-step process is based on the use of an aqueous medium containing Fe(CN) 6 4- and pyrrole. The ferrocyanide ion passivates the substrate by formation of ZnHCF film during the electropolymerization process of pyrrole and therefore makes it possible to obtain strongly adherent PPy films, with controlled thickness, either by cyclic voltammetry or by electrolysis at constant current or constant potential without any previously treatment of the zinc electrode surface. The polypyrrole films deposited on the zinc electrode were characterized by cyclic voltammetry and scanning electron microscopic (SEM) measurement

  15. Construction of a monoanionic S,N,S-pincer ligand with a pyrrole core by sequential [1,2] phospho-Fries rearrangement. Characterization of palladium and silver coordination complexes

    NARCIS (Netherlands)

    Fraix, A.; Lutz, M.; Spek, A.L.; Klein Gebbink, R.J.M.; van Koten, G.; Salaun, J. -Y; Jaffrès, P. -A

    2010-01-01

    The synthesis of an S,NH,S-pincer ligand possessing a pyrrole core and two O,O-diethylthiophosphonyl groups to design PS lateral coordination sites is reported. The synthetic procedure to produce this ligand makes use of the nitrogen atom of the pyrrole heterocycle to successively functionalize the

  16. Electrografting of in situ generated pyrrole derivative diazonium salt for the surface modification of nickel

    International Nuclear Information System (INIS)

    Jacques, A.; Devillers, S.; Delhalle, J.; Mekhalif, Z.

    2013-01-01

    Highlights: • Electrografting of in situ generated 4-pyrrolylphenyldiazonium (Py-PD) on Ni. • Generation of Py-PD from 4-pyrrolylaniline in 3 acidic conditions followed by UV. • XPS and SEM confirm efficiency, reproducibility and homogeneity of the grafting. • Electrografting process assessed by CV. • Barrier properties of the grafted film evidenced by CV. -- Abstract: This work reports for the first time on the modification of nickel surfaces by cathodic electrografting of in situ generated diazonium. An original diazonium salt (the 4-pyrrolylphenyldiazonium called Py-PD hereafter) was electrografted on nickel after its generation from 4-(1H-pyrrol-1-yl)aniline (Py-A) in presence of three acidic conditions (1, 2 and 10 equiv. of HClO 4 /Py-A) has been investigated by UV–vis spectroscopy. Results show that the potentiostatic electrografting of Py-PD is concomitant with nickel and proton reduction. This electrografting leads to the formation of multilayered films in each of the studied in situ generation conditions. The use of 1 equiv. of HClO 4 /Py-A for the in situ generation results in the formation of inhomogeneous and irreproducible coatings while 2 and 10 equiv. lead to the formation of highly covering, homogeneous and reproducible films. These films present good electrochemical barrier properties toward the ferri/ferrocyanide couple. The use of gentle stoichiometric acidic conditions for in situ diazonium generation widens the application field of this one-step procedure to the surface modification of oxidizable materials presenting an unstable oxide layer

  17. Excess L-arginine restores endothelium-dependent relaxation impaired by monocrotaline pyrrole

    International Nuclear Information System (INIS)

    Cheng Wei; Oike, Masahiro; Hirakawa, Masakazu; Ohnaka, Keizo; Koyama, Tetsuya; Ito, Yushi

    2005-01-01

    The pyrrolizidine alkaloid plant toxin monocrotaline pyrrole (MCTP) causes pulmonary hypertension in experimental animals. The present study aimed to examine the effects of MCTP on the endothelium-dependent relaxation. We constructed an in vitro disease model of pulmonary hypertension by overlaying MCTP-treated bovine pulmonary artery endothelial cells (CPAEs) onto pulmonary artery smooth muscle cell-embedded collagen gel lattice. Acetylcholine (Ach) induced a relaxation of the control CPAEs-overlaid gels that were pre-contracted with noradrenaline, and the relaxation was inhibited by L-NAME, an inhibitor of NO synthase (NOS). In contrast, when MCTP-treated CPAEs were overlaid, the pre-contracted gels did not show a relaxation in response to Ach in the presence of 0.5 mM L-arginine. Expression of endothelial NOS protein, Ach-induced Ca 2+ transients and cellular uptake of L-[ 3 H]arginine were significantly smaller in MCTP-treated CPAEs than in control cells, indicating that these changes were responsible for the impaired NO production in MCTP-treated CPAEs. Since cellular uptake of L-[ 3 H]arginine linearly increased according to its extracellular concentration, we hypothesized that the excess concentration of extracellular L-arginine might restore NO production in MCTP-treated CPAEs. As expected, in the presence of 10 mM L-arginine, Ach showed a relaxation of the MCTP-treated CPAEs-overlaid gels. These results indicate that the impaired NO production in damaged endothelial cells can be reversed by supplying excess L-arginine

  18. Transition metal doped poly(aniline-co-pyrrole)/multi-walled carbon nanotubes nanocomposite for high performance supercapacitor electrode materials

    International Nuclear Information System (INIS)

    Dhibar, Saptarshi; Bhattacharya, Pallab; Hatui, Goutam; Das, C.K.

    2015-01-01

    Highlights: • The CuCl 2 doped copolymer (PANI and PPy)/MWCNTs nanocomposite was prepared. • The nanocomposite achieved highest specific capacitance of 383 F/g at a 0.5 A/g. • Nanocomposite exhibits better energy density as well as power density. • The nanocomposite also showed better electrical conductivity at room temperature. • The nanocomposite can be used as promising electrode materials for supercapacitor. - Abstract: In this present communication, copolymer of polyaniline (PANI) and polypyrrole (PPy) that is poly(aniline-co-pyrrole) [poly(An-co-Py)], copper chloride (CuCl 2 ) doped poly(aniline-co-pyrrole) [poly(An-co-Py) Cu], and CuCl 2 doped poly(aniline-co-pyrrole)/multi walled carbon nanotubes (MWCNTs) [poly(An-co-Py) Cu CNT] nanocomposite have been prepared by a simple and inexpensive in-situ chemical oxidative polymerization method, using ammonium persulfate (APS) as oxidant and hydrochloric acid (HCl) as dopant and investigated as high performance supercapacitor electrode materials. The possible interaction between CuCl 2 with copolymers and MWCNTs was investigated by Fourier transform infrared spectroscopy (FTIR) and UV–visible spectroscopy analysis. The morphological characteristic of all the electrode materials were analyzed by Field emission scanning electron microscopy (FESEM) and Transmission electron microscopy (TEM) study. The electrochemical characterizations of all the electrode materials were carried out by three electrode probe method where, standard calomel electrode and platinum were used as reference and counter electrodes, respectively. Among all the electrode materials, poly(An-co-Py) Cu CNT nanocomposite achieved highest specific capacitance value of 383 F/g at 0.5 A/g scan rate. The nanocomposite showed better electrical conductivity at room temperature and also attained nonlinear current–voltage characteristic. Based on the superior electrochemical as well as other properties the as prepared nanocomposite can be used

  19. Transition metal doped poly(aniline-co-pyrrole)/multi-walled carbon nanotubes nanocomposite for high performance supercapacitor electrode materials

    Energy Technology Data Exchange (ETDEWEB)

    Dhibar, Saptarshi; Bhattacharya, Pallab; Hatui, Goutam; Das, C.K., E-mail: chapal12@yahoo.co.in

    2015-03-15

    Highlights: • The CuCl{sub 2} doped copolymer (PANI and PPy)/MWCNTs nanocomposite was prepared. • The nanocomposite achieved highest specific capacitance of 383 F/g at a 0.5 A/g. • Nanocomposite exhibits better energy density as well as power density. • The nanocomposite also showed better electrical conductivity at room temperature. • The nanocomposite can be used as promising electrode materials for supercapacitor. - Abstract: In this present communication, copolymer of polyaniline (PANI) and polypyrrole (PPy) that is poly(aniline-co-pyrrole) [poly(An-co-Py)], copper chloride (CuCl{sub 2}) doped poly(aniline-co-pyrrole) [poly(An-co-Py) Cu], and CuCl{sub 2} doped poly(aniline-co-pyrrole)/multi walled carbon nanotubes (MWCNTs) [poly(An-co-Py) Cu CNT] nanocomposite have been prepared by a simple and inexpensive in-situ chemical oxidative polymerization method, using ammonium persulfate (APS) as oxidant and hydrochloric acid (HCl) as dopant and investigated as high performance supercapacitor electrode materials. The possible interaction between CuCl{sub 2} with copolymers and MWCNTs was investigated by Fourier transform infrared spectroscopy (FTIR) and UV–visible spectroscopy analysis. The morphological characteristic of all the electrode materials were analyzed by Field emission scanning electron microscopy (FESEM) and Transmission electron microscopy (TEM) study. The electrochemical characterizations of all the electrode materials were carried out by three electrode probe method where, standard calomel electrode and platinum were used as reference and counter electrodes, respectively. Among all the electrode materials, poly(An-co-Py) Cu CNT nanocomposite achieved highest specific capacitance value of 383 F/g at 0.5 A/g scan rate. The nanocomposite showed better electrical conductivity at room temperature and also attained nonlinear current–voltage characteristic. Based on the superior electrochemical as well as other properties the as prepared

  20. Synthesis and electrochemical properties of novel, donor–acceptor pyrrole derivatives with 1,8-naphthalimide units and their polymers

    International Nuclear Information System (INIS)

    Ledwon, Przemyslaw; Brzeczek, Alina; Pluczyk, Sandra; Jarosz, Tomasz; Kuznik, Wojciech; Walczak, Krzysztof; Lapkowski, Mieczyslaw

    2014-01-01

    A new class of bipolar monomers with pyrrole or thiophene–pyrrole–thiophene as electron donor and 1,8-naphthalimide as electron acceptor unit is reported. Donor–acceptor conjugated polymers were generated electrochemically. The synthesis of monomers, optical, electrochemical and spectroelectrochemical properties supported by theoretical calculations are presented. 1,8-naphthalimide units were attached directly to pyrrole in compounds 1a and 2a or by different bridges in the case of 1b and 2b. Intra-molecular donor–acceptor interactions of the monomers and its polymers were investigated using cyclic voltammetry, in-situ UV–Vis-NIR, electron spin resonance (ESR) spectroelectrochemistry and fluorescence spectroscopy. Studied compounds present large discrepancy (up to 1.31 eV for 2a) between energy gap values determined through electrochemical and optical measurements. The Time-dependent density functional theory (TDDFT) calculations help to explain this discrepancy. This is caused by weak HOMO to LUMO transition, 2000 times weaker than HOMO −2 to LUMO or HOMO to LUMO +1 transition. Altering the structure of monomers yields different stability and properties of obtained polymers. The p- and n-doping processes are separated. Anions are localized mainly on 1,8-naphthalimide units. Cations are localized mainly on pyrrole or thiophene–pyrrole–thiophene moiety and their polymer chains. Attachment of the additional thiophene units decreases the oxidation potential of the monomer and reduces the influence of the steric hindrance between 1,8-naphthalimide moiety and polymer/oligomers chain. This new class of model compounds is promising for use as a material with enhanced charge separation for wide range of optoelectronic, electrochromic and photovoltaic applications

  1. Control of charge transfer by conformational and electronic effects: Donor-donor and donor-acceptor phenyl pyrroles

    International Nuclear Information System (INIS)

    Neubauer, Antje; Bendig, Juergen; Rettig, Wolfgang

    2009-01-01

    Derivatives of N-pyrrolobenzene with a para-donor and a para-acceptor substituent on the benzene ring are compared. It is shown that by a suitable increase of the donor strength of the pyrrolo group, CT fluorescence can be achieved even for donor-donor-substituted benzenes. The ICT emission for sterically hindered compounds is more forbidden than that of unhindered phenyl pyrroles. This suggests conformational effects which induce a narrower twist angle distribution around a perpendicular minimum in the excited state.

  2. Fragmentation dynamics of size selected pyrrole clusters prepared by electron impact ionization: Forming a solvated dimer ion core

    Czech Academy of Sciences Publication Activity Database

    Profant, V.; Poterya, Viktoriya; Fárník, Michal; Slavíček, P.; Buck, U.

    2007-01-01

    Roč. 111, č. 49 (2007), s. 12477-12486 ISSN 1089-5639 R&D Projects: GA AV ČR KAN400400651; GA ČR GA203/06/1290 Grant - others:GA ČR GP203/07/P449; University Grant(CZ) 8113-10/257852 Institutional research plan: CEZ:AV0Z40400503 Source of funding: V - iné verejné zdroje Keywords : pyrrole cluster s * structure * dynamics Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.918, year: 2007

  3. Rhodium enalcarbenoids: direct synthesis of indoles by rhodium(II)-catalyzed [4+2] benzannulation of pyrroles.

    Science.gov (United States)

    Dawande, Sudam Ganpat; Kanchupalli, Vinaykumar; Kalepu, Jagadeesh; Chennamsetti, Haribabu; Lad, Bapurao Sudam; Katukojvala, Sreenivas

    2014-04-14

    Disclosed herein is the design of an unprecedented electrophilic rhodium enalcarbenoid which results from rhodium(II)-catalyzed decomposition of a new class of enaldiazo compounds. The synthetic utility of these enalcarbenoids has been successfully demonstrated in the first transition-metal-catalyzed [4+2] benzannulation of pyrroles, thus leading to substituted indoles. The new benzannulation has been applied to the efficient synthesis of the natural product leiocarpone as well as a potent adipocyte fatty-acid binding protein inhibitor. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Quadrupolar, emission-tunable pi-expanded 1,4-dihydropyrrolo 3,2-b pyrroles - synthesis and optical properties

    DEFF Research Database (Denmark)

    Janiga, A.; Bednarska, D.; Thorsted, B.

    2014-01-01

    elucidated by comparison with simpler tetraaryl-analogues. The strong charge-transfer characteristic of these functional dyes can be illustrated by large Stokes shifts (4100-7100 cm(-1)) for A-D-A architectures. The replacement of phenyl rings at positions 2 and 5 with the arylethynylaryl substituents......The synthesis and optical characterization of six novel heteroaromatic-based chromophores is described. The new dyes present mostly an A-D-A general framework, where A is an electron-deficient aromatic ring and D is an electron-rich pyrrolo[3,2-b] pyrrole moiety, linked via triple bonds...

  5. Ruthenium(II)-catalyzed synthesis of pyrrole- and indole-fused isocoumarins by C-H bond activation in DMF and water

    Digital Repository Service at National Institute of Oceanography (India)

    Singh, K.S.; Sawant, S.G.; Dixneuf, P.H.

    stream_size 26907 stream_content_type text/plain stream_name ChemCatChem_8_1046a.pdf.txt stream_source_info ChemCatChem_8_1046a.pdf.txt Content-Encoding UTF-8 Content-Type text/plain; charset=UTF-8 Author version...: ChemCatChem, vol.8(6); 2016; 1046-1050 Ruthenium(II) catalysed synthesis of pyrrole and indole fused isocoumarins via C-H bond activation in DMF and water† Keisham S. Singh*,a Sneha G. Sawanta, Pierre H. Dixneuf*,b Abstract: Pyrrole and indole...

  6. Synthesis of 2-[4-(10H-Substituted Phenothiazine-3-yl-6-Pyrimidin-2-Phenylthiol/ol/amine/thiol] Pyrroles

    Directory of Open Access Journals (Sweden)

    Meghasham Narule

    2007-01-01

    Full Text Available 2-[4-Hydroxy benz-1(propene-1-one]Pyrrole II on treatment with phenyl thiourea, guanidine carbonate, urea and thiourea in alcoholic KOH yielded compounds III, IV, V, VI which on treatment with different aryl anilines gave compounds VII, VIII, IX, X which under goes cyclisation with sulphur and iodine to give 2-[4-(10H-substituted phenothiazine-3-yl-6-pyrimidin-2-phenylthiol/-ol/-amine/-thiol] pyrrole XI(a-j, XII(a-j, XIII(a-j and XIV(a-j respectively. The structural products were characterized by elemental analysis and spectral data.

  7. meso-Octamethylcalix[4]pyrrole as an effective macrocyclic receptor for the univalent thallium cation in the gas phase: Experimental and theoretical study

    Science.gov (United States)

    Polášek, Miroslav; Makrlík, Emanuel; Kvíčala, Jaroslav; Křížová, Věra; Vaňura, Petr

    2018-02-01

    By using electrospray ionization mass spectrometry (ESI-MS), it was proven experimentally that the univalent thallium cation (Tl+) forms with meso-octamethylcalix[4]pyrrole (1) the cationic complex species 1 Tl+. When this kinetically stable cation-π complex 1 Tl+ is collisionally activated, it decomposes by elimination of the whole ligand 1 or small meso-octamethylcalix[4]pyrrole fragments. Further, applying quantum chemical DFT calculations, four different conformations of the resulting complex 1 Tl+ were derived. It means that under the present experimental conditions, this ligand 1 can be considered as a very effective macrocyclic receptor for the thallium cation.

  8. Pyrrole-phenylboronic acid: a novel monomer for dopamine recognition and detection based on imprinted electrochemical sensor.

    Science.gov (United States)

    Zhong, Min; Teng, Ying; Pang, Shufen; Yan, Liqin; Kan, Xianwen

    2015-02-15

    A molecular imprinting polymer (MIP) based electrochemical sensor was successfully prepared for dopamine (DA) recognition and detection using pyrrole-phenylboronic acid (py-PBA) as a novel electropolymerized monomer. py-PBA could form cyclic boronic ester bond with DA, thus endowing a double recognition capacity of the sensor to DA in the combination of the imprinted effect of MIP. Compared with the sensor prepared using pyrrole or phenylboronic acid as electropolymerized monomer, the present sensor exhibited a remarkable high imprinted factor to DA. The influence factors including pH value, the mole ratio between monomer and template molecule, electropolymerization scan rate, and scan cycles of electropolymerization process were investigated and optimized. Under the optimal conditions, the sensor could recognize DA from its analogs and monosaccharides. A linear ranging from 5.0 × 10(-8) to 1.0 × 10(-5) mol/L for the detection of DA was obtained with a detection limit of 3.3 × 10(-8) mol/L (S/N = 3). The sensor has been applied to analyze DA in injection samples with satisfactory results. Copyright © 2014 Elsevier B.V. All rights reserved.

  9. A role of nanotube dangling pyrrole and oxygen functions in the electrochemical synthesis of polypyrrole/MWCNTs hybrid materials

    International Nuclear Information System (INIS)

    Krukiewicz, Katarzyna; Herman, Artur P.; Turczyn, Roman; Szymańska, Katarzyna; Koziol, Krzysztof K.K.; Boncel, Sławomir; Zak, Jerzy K.

    2014-01-01

    Highlights: • The effect of MWCNT functionalization on properties of PPy composites was explained. • The behavior of pristine, pyrrole-modified and oxidized MWCNT was explained. • Functionalization of MWCNT improved their dispersibility and processability. • Different mechanisms of (f-)MWCNT incorporation into PPy composites were explained. • Orientation of growing PPy chains was tailored through the addition of (f-)MWCNT. - Abstract: The effect of the functionalization of multi-walled carbon nanotubes (MWCNTs) on the process of electrochemical co-deposition of MWCNTs and polypyrrole (PPy), as well as the morphology of obtained composites have been demonstrated. As the nanotube components of the hybrids, three types of MWCNT were used, namely c-CVD derived (pristine) MWCNTs, their oxidized counterparts MWCNT-Ox and pyrrole-modified MWCNT-Py. The stability of pristine and functionalized MWCNTs (f-MWCNT) dispersions in tetrahydrofuran and water was studied together with the description of the process of formation PPy/(f-)MWCNT hybrid materials via electrochemical co-deposition. The structural and morphological properties of the hybrids were characterized by Raman spectroscopy, scanning electron microscopy and atomic force microscopy revealing substantial differences among hybrid materials in their surface morphology and the influence of MWCNT functionalization on the orientation of growing PPy chains

  10. A role of nanotube dangling pyrrole and oxygen functions in the electrochemical synthesis of polypyrrole/MWCNTs hybrid materials

    Energy Technology Data Exchange (ETDEWEB)

    Krukiewicz, Katarzyna, E-mail: katarzyna.krukiewicz@polsl.pl [Department of Physical Chemistry and Technology of Polymers, Silesian University of Technology, Strzody 9, 44-100 Gliwice (Poland); Herman, Artur P., E-mail: artur.herman@polsl.pl [Department of Organic Chemistry, Bioorganic Chemistry and Biotechnology, Silesian University of Technology, Krzywoustego 4, Gliwice 44-100 (Poland); Turczyn, Roman, E-mail: roman.turczyn@polsl.pl [Department of Physical Chemistry and Technology of Polymers, Silesian University of Technology, Strzody 9, 44-100 Gliwice (Poland); Szymańska, Katarzyna, E-mail: katarzyna.szymanska@polsl.pl [Department of Chemical and Process Engineering, Silesian University of Technology, Strzody 7, 44-100 Gliwice (Poland); Koziol, Krzysztof K.K., E-mail: kk292@cam.ac.uk [Department of Materials Science and Metallurgy, University of Cambridge, 27 Charles Babbage Road, Cambridge CB3 0FS (United Kingdom); Boncel, Sławomir, E-mail: slawomir.boncel@polsl.pl [Department of Organic Chemistry, Bioorganic Chemistry and Biotechnology, Silesian University of Technology, Krzywoustego 4, Gliwice 44-100 (Poland); Zak, Jerzy K., E-mail: jerzy.zak@polsl.pl [Department of Physical Chemistry and Technology of Polymers, Silesian University of Technology, Strzody 9, 44-100 Gliwice (Poland)

    2014-10-30

    Highlights: • The effect of MWCNT functionalization on properties of PPy composites was explained. • The behavior of pristine, pyrrole-modified and oxidized MWCNT was explained. • Functionalization of MWCNT improved their dispersibility and processability. • Different mechanisms of (f-)MWCNT incorporation into PPy composites were explained. • Orientation of growing PPy chains was tailored through the addition of (f-)MWCNT. - Abstract: The effect of the functionalization of multi-walled carbon nanotubes (MWCNTs) on the process of electrochemical co-deposition of MWCNTs and polypyrrole (PPy), as well as the morphology of obtained composites have been demonstrated. As the nanotube components of the hybrids, three types of MWCNT were used, namely c-CVD derived (pristine) MWCNTs, their oxidized counterparts MWCNT-Ox and pyrrole-modified MWCNT-Py. The stability of pristine and functionalized MWCNTs (f-MWCNT) dispersions in tetrahydrofuran and water was studied together with the description of the process of formation PPy/(f-)MWCNT hybrid materials via electrochemical co-deposition. The structural and morphological properties of the hybrids were characterized by Raman spectroscopy, scanning electron microscopy and atomic force microscopy revealing substantial differences among hybrid materials in their surface morphology and the influence of MWCNT functionalization on the orientation of growing PPy chains.

  11. Electrical and dielectric investigation of intercalated polypyrrole montmorillonite nanocomposite prepared by spontaneous polymerization of pyrrole into Fe(III)-montmorillonite

    Energy Technology Data Exchange (ETDEWEB)

    Zidi, Rabii, E-mail: rabiizidi@gmail.com [Physical Chemistry Laboratory for Mineral Materials and their Applications, National Center for Research in Materials Sciences (CNRSM), B.P.73, 8020 Soliman (Tunisia); Bekri-Abbes, Imene; Sdiri, Nasr [Physical Chemistry Laboratory for Mineral Materials and their Applications, National Center for Research in Materials Sciences (CNRSM), B.P.73, 8020 Soliman (Tunisia); Vimalanandan, Ashokanand; Rohwerder, Michael [Max-Planck-Institut für Eisenforschung GmbH, Düsseldorf (Germany); Srasra, Ezzeddine [Physical Chemistry Laboratory for Mineral Materials and their Applications, National Center for Research in Materials Sciences (CNRSM), B.P.73, 8020 Soliman (Tunisia)

    2016-10-15

    Highlights: • We have prepared and characterized a Fe-MMT/PPy nanocomposites. • Investigate electrical conductivity and dielectric properties of the nanocomposite. • Investigate the temperature and frequency dependencies of alternating current conductivity of nanocomposites. - Abstract: Pyrrole was introduced into Fe(III)-exchanged montmorillonite to spontaneously polymerize within the interlayer resulting in the formation of intercalated polypyrrole-montmorillonite nanocomposite. The molar proportion of pyrrole to interlayer Fe{sup 3+} (R) has been varied from 0.5 to 5. The nanocomposite has been characterized by X-ray diffraction, Scanning Electronic Microscope, FTIR spectroscopy and impedance spectroscopy. It has been shown that intercalated polypyrrole montmorillonite nanocomposite was obtained. The results showed that the dc conductivity and dielectric properties of polypyrrole depend on R. The alternating current (ac) conductivity of the polymer obeys the power law, i.e., σ{sub ac}(ω) = Aω{sup s}. The alternating conductivity of nanocomposite was controlled by the correlated barrier hopping model. The activation energy for alternating current mechanism decreases with increasing frequency which confirms the hopping conduction to the dominant mechanism as compared with the dc activation energy. The dielectric relaxation mechanism was explained on the basis of complex dielectric modulus.

  12. (4-Nitrophenylmethyl 2,3-dihydro-1H-pyrrole-1-carboxylate: crystal structure and Hirshfeld analysis

    Directory of Open Access Journals (Sweden)

    Julio Zukerman-Schpector

    2018-03-01

    Full Text Available In the title compound, C12H12N2O4, the dihydropyrrole ring is almost planar (r.m.s. deviation = 0.0049 Å and is nearly coplanar with the adjacent C2O2 residue [dihedral angle = 4.56 (9°], which links to the 4-nitrobenzene substituent [dihedral angle = 4.58 (8°]. The molecule is concave, with the outer rings lying to the same side of the central C2O2 residue and being inclined to each other [dihedral angle = 8.30 (7°]. In the crystal, supramolecular layers parallel to (10-5 are sustained by nitrobenzene-C—H...O(carbonyl and pyrrole-C—H...O(nitro interactions. The layers are connected into a three-dimensional architecture by π(pyrrole–π(nitrobenzene stacking [inter-centroid separation = 3.7414 (10 Å] and nitro-O...π(pyrrole interactions.

  13. Thieno[3,4-c]Pyrrole-4,6-Dione-Based Polymer Acceptors for High Open-Circuit Voltage All-Polymer Solar Cells

    KAUST Repository

    Liu, Shengjian; Song, Xin; Thomas, Simil; Kan, Zhipeng; Cruciani, Federico; Laquai, Fré dé ric; Bredas, Jean-Luc; Beaujuge, Pierre

    2017-01-01

    limits the perspectives to meet the 10% efficiency threshold in all-polymer solar cells. This report examines two polymer acceptor analogs composed of thieno[3,4-c]pyrrole-4,6-dione (TPD) and 3,4-difluorothiophene ([2F]T) motifs, and their BHJ solar cell

  14. Thieno[3,4-c]pyrrole-4,6-dione-3,4-difluorothiophene Polymer Acceptors for Efficient All-Polymer Bulk Heterojunction Solar Cells

    KAUST Repository

    Liu, Shengjian

    2016-09-16

    Branched-alkyl-substituted poly(thieno[3,4-c]pyrrole-4,6-dione-alt-3,4-difluorothiophene) (PTPD[2F]T) can be used as a polymer acceptor in bulk heterojunction (BHJ) solar cells with a low-band-gap polymer donor (PCE10) commonly used with fullerenes. The

  15. In-situ optical spectroscopy and electronic properties of pyrrole sub-monolayers on Ga-rich GaAs(001)

    International Nuclear Information System (INIS)

    Bruhn, Thomas; Ewald, Marcel; Fimland, Bjørn-Ove; Kneissl, Michael; Esser, Norbert; Vogt, Patrick

    2011-01-01

    We report on the characterization of sub-monolayers of pyrrole adsorbed on Ga-rich GaAs(001) surfaces. The interfaces were characterized by scanning tunneling microscopy (STM), scanning tunneling spectroscopy (STS) and reflectance anisotropy spectroscopy (RAS) in a spectral range between 1.5 and 8 eV. The adsorption of pyrrole on Ga-rich GaAs(001) modifies the RAS spectrum of the clean GaAs surface significantly at the surface transitions at 2.2 and 3.5 eV indicating a chemisorption of the molecules. By the help of transients at these surface transitions during the adsorption process, we were able to prepare different molecular coverages from a sub-monolayer up to a complete molecular layer. The different coverages of pyrrole were imaged by STM and electronically characterized by STS. The measurements reveal that the adsorbed molecules electronically insulate the surface and indicate the formation of new interface states around −3.5 and +4.2 eV. The RAS measurements in the UV region show new anisotropies in the spectral range of the optical transitions of the adsorbed pyrrole molecules. Our measurements demonstrate the potential of optical and electronic spectroscopy methods for the characterization of atomically thin molecular layers on semiconductor surfaces allowing a direct access to the properties of single adsorbed molecules.

  16. Preparation of deuterated heterocyclic five-membered ring compounds (furan, thiophene, pyrrole, and derivatives) by base-catalyzed hydrogen isotope exchange with deuterium oxide

    International Nuclear Information System (INIS)

    Heinrich, K.H.; Herrmann, M.; Moebius, G.; Sprinz, H.

    1984-01-01

    Several deuterated heterocyclic compounds of the type of furan,thiophene and pyrrole were prepared by base-catalyzed proton exchange with deuterium oxide at temperatures above 423 K in a closed system. The determination of deuterium and its distribution within the molecules was carried out by mass spectrometry and 1 H nmr spectrometry. (author)

  17. Ion vs. ion pair receptor: NMR and DFT study of the interaction of Thallium and Cesium ions and ion pairs with meso-octamethylcalix[4]pyrrole

    Czech Academy of Sciences Publication Activity Database

    Kříž, Jaroslav; Dybal, Jiří; Makrlík, E.; Sedláková, Zdeňka

    2012-01-01

    Roč. 400, 25 May (2012), s. 19-28 ISSN 0301-0104 R&D Projects: GA ČR GA203/09/1478 Institutional research plan: CEZ:AV0Z40500505 Keywords : calix[4]pyrrole * cesium receptor * fluoride receptor Subject RIV: CD - Macromolecular Chemistry Impact factor: 1.957, year: 2012

  18. The Synthesis of Novel 3-Substituted Poly(pyrroles) Bearing Crown-ether Moieties and a Study of their Electrochemical Properties

    DEFF Research Database (Denmark)

    Guernion, Nicolas J.L.; Blencowe, A.; Hayes, Wayne

    2006-01-01

    A series of fourteen novel pyrrole monomers substituted at the 3-position with aliphatic and aromatic crown-ether moieties have been synthesised in good yield and characterised extensively. Several of those compounds were electropolymerised successfully in acetonitrile, using both potentiostatic ...

  19. Zinc hexacyanoferrate film as an effective protecting layer in two-step and one-step electropolymerization of pyrrole on zinc substrate

    Energy Technology Data Exchange (ETDEWEB)

    Pournaghi-Azar, M.H. [Electroanalytical Chemistry Laboratory, Faculty of Chemistry, University of Tabriz, Tabriz (Iran, Islamic Republic of)]. E-mail: pournaghiazar@tabrizu.ac.ir; Nahalparvari, H. [Electroanalytical Chemistry Laboratory, Faculty of Chemistry, University of Tabriz, Tabriz (Iran, Islamic Republic of)

    2005-03-15

    The two-step and one-step electrosynthesis processes of polypyrrole (PPy) films on the zinc substrate are described. The two-step process includes (i) the zinc surface pretreatment with hexacyanoferrate ion in the aqueous medium in order to form a zinc hexacyanoferrate (ZnHCF) film non-blocking passive layer on the surface and with the view to prevent its reactivity and (ii) electropolymerization of pyrrole on the ZnHCF vertical bar Zn-modified electrode in aqueous pyrrole solution. In this context, both the non-electrolytic and electrolytic procedures were adapted, and the effect of some experimental conditions such as supporting electrolyte, pH and temperature of the solution at the zinc surface pretreatment step as well as pyrrole concentration and electrochemical techniques at the polymerization step was investigated. By optimizing the experimental conditions in both steps, we have obtained a homogeneous and strongly adherent PPy films on the zinc substrate. The one-step process is based on the use of an aqueous medium containing Fe(CN){sub 6}{sup 4-} and pyrrole. The ferrocyanide ion passivates the substrate by formation of ZnHCF film during the electropolymerization process of pyrrole and therefore makes it possible to obtain strongly adherent PPy films, with controlled thickness, either by cyclic voltammetry or by electrolysis at constant current or constant potential without any previously treatment of the zinc electrode surface. The polypyrrole films deposited on the zinc electrode were characterized by cyclic voltammetry and scanning electron microscopic (SEM) measurement.

  20. [18F]fluoromethylated phenyl-pyrroles and 7-azaindole analog as potential dopamine D4 receptor imaging agents

    International Nuclear Information System (INIS)

    Ji, D. Y.; Oh, S. Z.; Choi, Y. S.; Lee, K. C.; Kim, S. E.; Choi, Y.; Lee, K. H.; Kim, B. T.

    1997-01-01

    An association between the dopamine D 4 receptor and schizophrenia was recently suggested and the D 4 receptor antagonists may thus have potential in elucidating the role of the receptor in schizophrenic patients. The purpose of this study was to develop some of these antagonists as potential dopamine D 4 receptor imaging agents for PET. We have prepared 1-(3-[ 18 F]fluoromethylphenyl)-3-([4-(pyridin-2-yl)piperazin-1-yl)methyl) pyrrole (1), 1-(3-[ 18 F]fluoromethylphenyl)-3-([4-(pyridin-2-yl)piperazin-1-yl)methyl) pyrrole (2), and 3-([4-(4-[ 18 F]fluoro methylbenzyl)piperazin-1-yl)methyl)-1H-pyrrolo(2,3,-b)pyridine (3) as potential imaging agents for the dopamine D 4 receptor for PET. The compounds [ 18 F]1 and [ 18 F]2 were prepared by coupling of (3-[ 18 F]fluoromethylphenyl)-pyrrol-1- yl-3-aldehyde and the piperazine moiety in the presence of NaBH 3 CN. The [ 18 F]fluorinated aldehyde was obtained in 60-85% yield by the displacement of the corresponding mesylate with F-18-(THF, 90 .deg. C, 5 min). HPLC purification (Alltech Econosil C-18 columm, 250 x 10 mm, 35: 65 = 0.1M NH 4 CI 2 H : CH 3 OH, 4 ml/min, t R =26.6 min) gave the [ 18 F]1 and [ 18 F]2 in 7-12% yield. In the case of azaindole 3, a methlene link was inserted between the piperazinyl and a fluoromethyl phenyl group. Radiochemical synthesis of the [ 18 F]3 was carried out by coupling of the piperazne moiety and [ 18 F]fluoromethylbenzyl mesylate in the presence of NEt 3 (3:1-CH 3 CN: DMF, 120 .deg. C, 30 min). Purification was carried out by HPLC using a C-18 column (Alltech Econosil, 50 x 10 mm, 100% 0.1M NH 4 CO 2 H for 5 min followed by 40:60=0.1 M NH 4 CO 2 H : MeOH, 4 ml/min t R =28.7 min). The time of synthesis including HPLC purification was 100 min. The overall yield of [ 18 F]3 was 10-15% with a radiochemical purity better than 97% and a specific activity greater than 1000 ci/mmol

  1. Nano-silver mediated polymerization of pyrrole: synthesis and gas sensing properties of polypyrrole (PPy)/Ag nano-composite.

    Science.gov (United States)

    Kate, Kunal H; Damkale, Shubhangi R; Khanna, P K; Jain, G H

    2011-09-01

    Thermal polymerization of pyrrole was performed using silver nitrate as source of silver ions followed by its conversion to Polypyrrole (PPy)/Ag nano-comoposites without using any external oxidizing agent or solvent. The formation of PPy was monitored by UV-Visible absorption spectroscopy showing a band at approximately 464 nm. XRD measurement confirmed characteristic peaks for face centered cubic (fcc) silver and presence of PPy at 2 theta of approximately 23 degrees suggesting the formation of PPy/Ag nanocomposite. Transmission electron microscopy (TEM) images showed non-aggregated spherical Ag nano-particles of about 5-10 nm. PPy/Ag thick film acts as a NH3 sensor at 100 degrees C, a H2S sensor at 250 degrees C and CO2 sensor at 350 degrees C. The thick films showed capability to recognize various gases at different operating temperature.

  2. Design and modelling of enzyme/poly-pyrrole modified electrodes for bio-catalyzed electro-synthesis processes

    International Nuclear Information System (INIS)

    Gros, Pierre

    1996-01-01

    This research thesis reports a study which aims at developing, analyzing and integrating an electrode-enzyme interface within an electro-enzymatic reactor to develop electrochemical biosensors. The adopted method comprises a confinement of the enzyme at the electrode surface by means of an electro-formed poly-pyrrole film. The author reports an experimental and theoretical study of the coupling between electrochemical reaction, enzymatic reaction and matter transfer in the polymer in order to better understand the operation of so-modified electrodes. Different parameters have an influence on the reaction rate. A numerical model (validated by experiments) allows the identification of the reaction limiting stages. A new elaboration protocol allows the polymer permeability to be increased. The interface is first applied to the reduction of the NAD coenzyme, and the process is also applied to the production of gluconic acid [fr

  3. Hemispherand-Strapped Calix[4]pyrrole: An Ion-pair Receptor for the Recognition and Extraction of Lithium Nitrite.

    Science.gov (United States)

    He, Qing; Zhang, Zhan; Brewster, James T; Lynch, Vincent M; Kim, Sung Kuk; Sessler, Jonathan L

    2016-08-10

    The hemispherand-strapped calix[4]pyrrole (1) acts as an ion pair receptor that exhibits selectivity for lithium salts. In organic media (CD2Cl2 and CD3OD, v/v, 9:1), receptor 1 binds LiCl with high preference relative to NaCl, KCl, and RbCl. DFT calculations provided support for the observed selectivity. Single crystal structures of five different lithium ion-pair complexes of 1 were obtained. In the case of LiCl, a single bridging water molecule between the lithium cation and chloride anion was observed, while tight contact ion pairs were observed in the case of the LiBr, LiI, LiNO3, and LiNO2 salts. Receptor 1 proved effective as an extractant for LiNO2 under both model solid-liquid and liquid-liquid extraction conditions.

  4. Modular synthesis and in vitro and in vivo antimalarial assessment of C-10 pyrrole mannich base derivatives of artemisinin.

    Science.gov (United States)

    Pacorel, Bénédicte; Leung, Suet C; Stachulski, Andrew V; Davies, Jill; Vivas, Livia; Lander, Hollie; Ward, Stephen A; Kaiser, Marcel; Brun, Reto; O'Neill, Paul M

    2010-01-28

    In two steps from dihydroartemisinin, a small array of 16 semisynthetic C-10 pyrrole Mannich artemisinin derivatives (7a-p) have been prepared in moderate to excellent yield. In vitro analysis against both chloroquine sensitive and resistant strains has demonstrated that these analogues have nanomolar antimalarial activity, with several compounds being more than 3 times more potent than the natural product artemisinin. In addition to a potent antimalarial profile, these molecules also have very high in vitro therapeutic indices. Analysis of the optimal Mannich side chain substitution for in vitro and in vivo activity reveals that the morpholine and N-methylpiperazine Mannich side chains provide analogues with the best activity profiles, both in vitro and in vivo in the Peter's 4 day test.

  5. Pyrrole-regulated precipitation of titania nanorods on polymer fabrics for photocatalytic degradation of trace toluene in air

    Science.gov (United States)

    Gu, Yi-Jie; Wen, Wei; Xu, Yang; Wu, Jin-Ming

    2018-03-01

    When compared with nanoparticulate counterparts, TiO2 thin films with vertically aligned one-dimensional (1D) nanostructures exhibit enhanced photocatalytic activity because of the highly accessible surface area. The perpendicular of the 1D nanostructure reduces the charge migration path and hence the carrier recombination rate, which also contributes to the photocatalytic activity. Furthermore, TiO2 thin films on flexible substrates are more suitable to degrade pollutants in either water or air because of its easy recovery and free-bending shape. In this study, flexible polyethylene fabrics were firstly coated with a sol-gel nanoparticulate TiO2 seed layer. Quasi-aligned TiO2 nanorods were then precipitated homogeneously under an atmospheric pressure and a low temperature not exceeding 80 °C, using a peroxy-titanium complex precursor with the additive of pyrrole. It is found that the density of TiO2 nanorods increased with the increasing amount of pyrrole monomers. The resultant TiO2 film on polyethylene fabrics exhibited a much reduced band gap of ca. 2.86 eV, which can be attributed to the surface oxygen deficiencies. When utilized to assist photocatalytic degradation of trace toluene in air under the UV light illumination, the TiO2 film exhibited a gradually increased photocatalytic activity upon the increasing cycles for up to six, because of the gradual removal of trace organics on the TiO2 surface. The highest photocatalytic efficiency is recorded to be 5 times that of TiO2 nanotube arrays, which are regarded as an excellent photocatalyst for air cleaning.

  6. 2-[2-(Aziridin-1-ylethyl]-5,5-dimethyl-2,5-dihydro-4H-benzo [e]isoindol-4-one (Cytotoxic Oxonaphthalene-Pyrroles, Part IV

    Directory of Open Access Journals (Sweden)

    Helmut Spreitzer

    2012-10-01

    Full Text Available An aziridine-containing side chain is attached to an oxonaphthalene-annelated pyrrole in expectation of DNA alkylating properties. The cytotoxicity is evaluated against two cell lines, KB-31 and KB-8511, respectively.

  7. Post Hartree–Fock and DFT Studies on Pyrrole···Nitrogen and Pyrrole···Carbon Monoxide Molecules

    Directory of Open Access Journals (Sweden)

    P. Kolandaivel

    2002-07-01

    Full Text Available Abstract: The hydrogen bonded and van der Waals isomers of pyrrole···nitrogen and pyrrole···carbon monoxide have been studied using ab initio and density functional theory methods. Complex geometries and total energies of the isomers have been determined at HF, MP2, B3LYP and B3PW91 levels of theory employing 6-31G* basis set. For pyrrole···nitrogen complex, only two isomers have stable structure and the more stable one is found to be the hydrogen bonded isomer. Among the five isomers of pyrrole···carbon monoxide complex, the hydrogen bonded isomer is found to be the most stable form. The interaction energy for all these isomers have been calculated after eliminating the basis set superposition errors by using the full counterpoise correction method. Chemical hardness, chemical potential have been calculated and are used to study the stability of the molecules.

  8. Ferrocene-Functionalized 4-(2,5-Di(thiophen-2-yl-1H-pyrrol-1-ylaniline: A Novel Design in Conducting Polymer-Based Electrochemical Biosensors

    Directory of Open Access Journals (Sweden)

    Rukiye Ayranci

    2015-01-01

    Full Text Available Herein, we report a novel ferrocenyldithiophosphonate functional conducting polymer and its use as an immobilization matrix in amperometric biosensor applications. Initially, 4-(2,5-di(thiophen-2-yl-1H-pyrrol-1-ylamidoferrocenyldithiophosphonate was synthesized and copolymerized with 4-(2,5-di(thiophen-2-yl-1H-pyrrol-1-ylbenzenamine at graphite electrodes. The amino groups on the polymer were utilized for covalent attachment of the enzyme glucose oxidase. Besides, ferrocene on the backbone was used as a redox mediator during the electrochemical measurements. Prior to the analytical characterization, optimization studies were carried out. The changes in current signals at +0.45 V were proportional to glucose concentration from 0.5 to 5.0 mM. Finally, the resulting biosensor was applied for glucose analysis in real samples and the data were compared with the spectrophotometric Trinder method.

  9. 3-(Dicyanomethylidene)indan-1-one-Functionalized Calix[4]arene-Calix[4]pyrrole Hybrid: An Ion-Pair Sensor for Cesium Salts.

    Science.gov (United States)

    Yeon, Yerim; Leem, Soojung; Wagen, Corin; Lynch, Vincent M; Kim, Sung Kuk; Sessler, Jonathan L

    2016-09-02

    A chromogenic calix[4]arene-calix[4]pyrrole hybrid ion pair receptor bearing an indane substituent at a β-pyrrolic position has been prepared. On the basis of solution-phase UV-vis spectroscopic analysis and (1)H NMR spectroscopic studies carried out in 10% methanol in chloroform, receptor 1 is able to bind only cesium ion pairs (e.g., CsF, CsCl, and CsNO3) but not the constituent cesium cation (as its perchlorate salt) or the F(-), Cl(-), or NO3(-) anions (as the tetrabutylammonium salts). It thus displays rudimentary AND logic gate behavior. Receptor 1 shows a colorimetric response to cesium ion pairs under conditions of solid-liquid (nitrobenzene) and liquid-liquid (D2O-nitrobenzene-d5) extraction.

  10. Silica sulfuric acid: a reusable solid catalyst for one pot synthesis of densely substituted pyrrole-fused isocoumarins under solvent-free conditions

    Directory of Open Access Journals (Sweden)

    Sudipta Pathak

    2013-11-01

    Full Text Available A convenient and efficient methodology for the synthesis of densely substituted pyrrole-fused isocoumarins, which employs solid-supported silica sulfuric acid (SSA as catalyst, has been developed. When the mixture of ninhydrin adducts of acetylacetone/ethyl acetoacetate and primary amines was heated on the solid surface of SSA under solvent-free conditions, the pyrrole-fused isocoumarins were formed in good yields. This synthetic method has several advantages such as the employment of solvent-free reaction conditions without the use of any toxic reagents and metal catalysts, the ease of product isolation, the use of a recyclable catalyst, the low cost, the easy availability of the starting materials, and the excellent yields of products.

  11. Grafting of palladium nanoparticles onto mesoporous molecular sieve MCM-41: Heterogeneous catalysts for the formation of an N-substituted pyrrol

    Czech Academy of Sciences Publication Activity Database

    Demel, Jan; Čejka, Jiří; Bakardjieva, Snejana; Štěpnička, P.

    2007-01-01

    Roč. 263, 1-2 (2007), s. 259-265 ISSN 1381-1169 R&D Projects: GA ČR GA104/05/0192; GA MŠk(CZ) LC06070 Institutional research plan: CEZ:AV0Z40400503; CEZ:AV0Z40320502 Keywords : palladium * nanoparticles * MCM-41 * pyrrol * catalysis Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.707, year: 2007

  12. Electrochromic properties of multicolored novel polymer synthesized via combination of benzotriazole and N-functionalized 2,5-di(2-thienyl)-1H-pyrrole units

    International Nuclear Information System (INIS)

    Rende, Eda; Kilic, Cihan E.; Udum, Yasemin Arslan; Toffoli, Daniele; Toppare, Levent

    2014-01-01

    Synthesis of new conducting polymers is desired since their electrochemical and optical properties enable them to be used as active layers in many device applications. Benzotriazole and N-functionalized 2,5-di(2-thienyl)-1H-pyrrole (SNS Series) containing polymers showed very promising results as electrochromic materials. In order to observe the effect of the combination of these two units, three new monomers; 2-(6-(2,5-bis(5-methylthiophen-2-yl)-1H-pyrrol-1-yl)hexyl)-4,7-di (thiophen-2-yl)-2H benzo[d][1,2,3]triazole (M1), 2-(6-(2,5-di(thiophen-2-yl)-1H-pyrrol-1-yl)hexyl)-4,7-di(thiophen-2-yl) -2H-benzo[d][1,2,3]triazole (M2) and 2-(6-(2,5-di(thiophen-2-yl)-1H-pyrrol-1-yl)hexyl)-4,7-bis (5-methylthiophen-2-yl)-2H-benzo[d][1,2,3]triazole (M3) were synthesized. To better characterize the electronic and spectroscopic properties of the monomers, density functional theory (DFT) and its time-dependent generalization (TD-DFT) were used to calculate their vertical ionization potentials, vertical electron affinity and to simulate and interpret their infrared and UV-vis spectra. The monomers were electrochemically polymerized and the resultant polymers were characterized with cyclic voltammetry and UV-vis-NIR spectroscopy techniques. An electrochromic device was constructed with electrochemical polymer of M2. The device switched between red and blue colors and showed exceptional optical memory

  13. meso-Octamethylcalix[4]pyrrole as an effective macrocyclic receptor for the univalent thallium cation in the gas phase: Experimental and theoretical study

    Czech Academy of Sciences Publication Activity Database

    Polášek, Miroslav; Makrlík, E.; Kvíčala, J.; Křížová, Věra; Vaňura, P.

    Roč. 1153 ( 2018 ), s. 78-84 ISSN 0022-2860 R&D Projects: GA MŠk CZ.1.05/3.2.00/08.0144 Grant - others:GA MŠk(CZ) 20/2015; GA MŠk(CZ) LM2010005 Institutional support: RVO:61388955 Keywords : Thallium cation * meso-Octamethylcalix[4]pyrrole * Complexation * DFT calculations * Structures Subject RIV: CF - Physical ; Theoretical Chemistry OBOR OECD: Physical chemistry Impact factor: 1.753, year: 2016

  14. Autoassemblage de macromolécules biologiques via des poly(pyrroles) et/ou des nanotubes de carbone fonctionnalisés

    OpenAIRE

    Baur , Jessica

    2010-01-01

    This work is dedicated to the development of hybrid assemblies based on polymers and biomolecules with or without carbon nanotubes with the aim to show their applications in different areas such as biosensors or bio-fuel cells. Firstly, poly(pyrrole-NTA)/Cu2+ was used for the elaboration of DNA or enzymatic biosensors. So, it was able to be used with its affinity partner, histidine, for the reversible immobilization of oligonucleotide probes tagged with histidines. Thanks to a detection witho...

  15. Antitumor Activity of a 5-Hydroxy-1H-Pyrrol-2-(5H-One-Based Synthetic Small Molecule In Vitro and In Vivo.

    Directory of Open Access Journals (Sweden)

    Yunyun Geng

    Full Text Available Alternative chemo-reagents are in great demand because chemotherapy resistance is one of the major challenges in current cancer treatment. 5-hydoxy-1H-pyrrol-2-(5H-one is an important N-heterocyclic scaffold that is present in natural products and medicinal chemistry. However, its antitumor activity has not been systematically explored. In this study, we screened a panel of 5-hydoxy-1H-pyrrol-2-(5H-one derivatives and identified compound 1d as possessing strong anti-proliferative activity in multiple cancer cell lines. Cell cycle analysis revealed that 1d can induce S-phase cell cycle arrest and that HCT116 was sensitive to 1d-induced apoptosis. Further analysis indicated that 1d preferentially induced DNA damage and p53 activation in HCT116 cells and that 1d-induced apoptosis is partly dependent on p53. Furthermore, we showed that 1d significantly suppressed tumor growth in xenograft tumor models in vivo. Taken together, our results suggest that 5-hydoxy-1H-pyrrol-2-(5H-one derivatives bear potential antitumor activity and that 1d is an effective agent for cancer treatment.

  16. Interaction of derived polymers from pyrrole with biocompatible solutions; Interaccion de polimeros derivados de pirrol con soluciones biocompatibles

    Energy Technology Data Exchange (ETDEWEB)

    Lopez G, O. G.

    2010-07-01

    This work presents a study about the synthesis by plasma, the electric properties and superficial interaction of polymers derived from pyrrole doped with Iodine with potential use as bio material. Poly-pyrrole is a semiconductor and biocompatible polymer with potential application in the development of artificial muscles and implants where the electric interaction between cells and material is an important variable. The syntheses were made at 13.5 MHz in a glass tubular reactor of 1500 cm{sup 3} with electrodes of 6.5 cm diameter and stainless steel flanges. An electrode was connected to the RF terminal of the power supply that is combined with a matching coupling resistance. The monomer and dopant used in this work were pyrrole and Iodine respectively, in closed containers. They were vaporized and injected separately into the reactor at room temperature and 0.1 mbar. The vapors of the reagents mixed freely in the reactor. The synthesis time was 240 min at 40, 60, 80 and 100 W. The polymers were obtained as thin films adhered to the reactor walls. The films were washed and swollen with distilled water and removed from the reactor walls with a small spatula. The polymers were irradiated with gamma rays at 18 and 22 KGy. Due to the fact that the doses are cumulative, the final dose applied was 40 KGy. The polymers characterization was carried out by Fourier Transform Infrared Spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy, contact angle, electrical conductivity and X-ray diffraction. The analyses indicates that the polymers have very similar structure in almost the entire power range, showing C-O, C=C, C-H, O-H, N-H bonds with a predominantly amorphous structure. The TGA analyses showed that the material has 4 or 5 loses of material. The first one starts after that 115 C except for the material irradiated at 40 KGy, this one begins in 87 C, the second one is in the interval of 196 and 295 C, the third one between 311 and 500 C, and the

  17. Ferricyanide confined into the integrative system of pyrrolic surfactant and SWCNTs: The enhanced electrochemial sensing of paracetamol

    International Nuclear Information System (INIS)

    Wu, Xiao-Yan; Niu, Wen-Jun; Cosnier, Serge; Deng, Sheng-Yuan; Zhang, Xue-Ji; Shan, Dan

    2015-01-01

    Highlights: • Amphiphilic surfactant derived from pyrrole was used to construct a special microheterogeneous system incorporated with SWCNTs by electropolymerization. • Common redox probe, Fe(CN) 6 3−/4− , was captured into this microheterogeneous system due to the cooperation interactions of electrostatic and π-π stacking. • A dramatically negative shift in the half wave potential compared to Fe(CN) 6 3−/4− in aqueous solution can be obtained due to the unusual Fe(CN) 6 3−/4− partitioning. • The entrapped Fe(CN) 6 3−/4− was applied in the construction of the enhanced electrochemical sensor to paracetamol. - Abstract: An enhanced paracetamol sensor was developed based on the integrative system of single walled carbon nanotubes (SWCNTs) and the pyrrolic surfactant, (11-pyrrolyl-1-yl-undecyl)triethylammonium tetrafluoroborate (A 2 ), in which confined the redox probe, Fe(CN) 6 3−/4− . A well-defined redox peaks of the firmly confined Fe(CN) 6 3−/4− with dramatically negative shift in the half-wave potential compared to Fe(CN) 6 3−/4− in aqueous solution was observed at GCE/polyA 2 -Fe(CN) 6 3−/4− /SWCNTs. To understand the unusual Fe(CN) 6 3−/4− partitioning in this microheterogeneous system, the responses of the Fe(CN) 6 3−/4− at the electrodes modified by SWCNTs, polyA 2 , SWCNTs/polyA 2 , and polyA 2 /SWCNTs were investigated, respectively. The results of cyclic voltammetry (CV) and differential pulse voltammetry (DPV) indicated that the proposed electrode exhibiting efficient electrocatalytic capability towards the paracetamol oxidation. Thereafter, an amperometric assay for paracetamol at GCE/polyA 2 -Fe(CN) 6 3−/4− /SWCNTs was developed at 0.4 V with an enhanced linear range from 3.4×10 −7 ∼7.98 × 10 −4 M.

  18. Biofabrication Using Pyrrole Electropolymerization for the Immobilization of Glucose Oxidase and Lactate Oxidase on Implanted Microfabricated Biotransducers

    Directory of Open Access Journals (Sweden)

    Christian N. Kotanen

    2014-03-01

    Full Text Available The dual responsive Electrochemical Cell-on-a-Chip Microdisc Electrode Array (ECC MDEA 5037 is a recently developed electrochemical transducer for use in a wireless, implantable biosensor system for the continuous measurement of interstitial glucose and lactate. Fabrication of the biorecognition membrane via pyrrole electropolymerization and both in vitro and in vivo characterization of the resulting biotransducer is described. The influence of EDC-NHS covalent conjugation of glucose oxidase with 4-(3-pyrrolyl butyric acid (monomerization and with 4-sulfobenzoic acid (sulfonization on biosensor performance was examined. As the extent of enzyme conjugation was increased sensitivity decreased for monomerized enzymes but increased for sulfonized enzymes. Implanted biotransducers were examined in a Sprague-Dawley rat hemorrhage model. Resection after 4 h and subsequent in vitro re-characterization showed a decreased sensitivity from 0.68 (±0.40 to 0.22 (±0.17 µA·cm−2·mM−1, an increase in the limit of detection from 0.05 (±0.03 to 0.27 (±0.27 mM and a six-fold increase in the response time from 41 (±18 to 244 (±193 s. This evidence reconfirms the importance of biofouling at the bio-abio interface and the need for mitigation strategies to address the foreign body response.

  19. Effect of non-electroactive additives on the early stage pyrrole electropolymerization on indium tin oxide electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Castro-Beltran, A. [Facultad de Ingeniería Mecánica y Eléctrica, Universidad Autónoma de Nuevo León, Ave. Pedro de Alba s/n, Ciudad Universitaria, C.P. 66451 San Nicolás de los Garza, N.L. (Mexico); Centro de Innovación Investigación y Desarrollo en Ingeniería y Tecnología (CIIDIT), Universidad Autónoma de Nuevo León, PIIT-Monterrey C.P. 66600 Apodaca, N.L. (Mexico); Dominguez, C.; Bahena-Uribe, D. [Centro Investigación en Ingeniería y Ciencias Aplicadas (CIICAp), Universidad Autónoma del Estado de Morelos, Av. Universidad 1001, Col. Chamilpa, C.P. 62209 Cuernavaca, Mor. (Mexico); Sepulveda-Guzman, S., E-mail: selene.sepulvedagz@uanl.edu.mx [Facultad de Ingeniería Mecánica y Eléctrica, Universidad Autónoma de Nuevo León, Ave. Pedro de Alba s/n, Ciudad Universitaria, C.P. 66451 San Nicolás de los Garza, N.L. (Mexico); Centro de Innovación Investigación y Desarrollo en Ingeniería y Tecnología (CIIDIT), Universidad Autónoma de Nuevo León, PIIT-Monterrey C.P. 66600 Apodaca, N.L. (Mexico); Cruz-Silva, R. [Research Center for Exotic NanoCarbon, Shinshu University, 4-17-1 Wakasato, Nagano 380-8553 (Japan)

    2014-09-01

    The use of non-electroactive additives during electrodeposition of conducting polymers has long been used to modify the properties of deposited films. These additives can improve the adhesion, and not only change the morphology and deposition rate but also modify the chemical composition of the electrodeposited polymer. Several compounds have been used to modify deposition of polypyrrole; however, there is no systematic study of these compounds. In this work, we comparatively studied several water soluble chemical compounds, a cationic polymer, an anionic polymer, a cationic surfactant, and an anionic surfactant during potentiostatic electrodeposition of polypyrrole. In order to study the effect of these compounds on the interface, where the electrochemical polymerization takes place, we used electrochemical impedance spectroscopy. The morphology during the initial stage of growth was studied by atomic force microscopy, whereas the resulting polypyrrole films were observed by scanning electron microscopy. - Highlights: • Early-stage polymerization polypyrrole particles on indium tin oxide (ITO). • Anionic additives promote pyrrole oxidation and polypyrrole film growth on ITO. • Cationic polyelectrolyte promotes adhesion between ITO and polypyrrole film. • Non-electroactive additives strongly influence polypyrrole nucleation on ITO.

  20. Quantitation of Pyrrole-Imidazole Polyamide in Rat Plasma by High-Performance Liquid Chromatography Coupled with UV Detection

    Directory of Open Access Journals (Sweden)

    Tomonori Kamei

    2012-01-01

    Full Text Available A simple and robust method using high-performance liquid chromatography with UV detection was developed and validated for the determination of six pyrrole-imidazole (PI polyamides (HN.49, TGF-β1f, TGF-β1t, HN.50f, HN.50t, and LOX-1 in rat plasma. After the plasma proteins were precipitated with methanol containing phenacetin as an internal standard, the analytes were separated on a Luna C18 (2 (5 μm, 4.6×150 mm. Calibration curves were linear over the range of 0.5 to 200 μg/mL for HN.49, 0.25 to 200 μg/mL for TGF-β1f, TGF-β1t, HN.50t, and LOX-1, 1 to 200 μg/mL for HN.50f in rat plasma. The inter- and intraday precision were below 15%, and the accuracy was within 15% at the quality controls. The validated method was successfully applied to sample analysis for the pharmacokinetic study.

  1. Characterization of electro-conductive fabrics prepared by in situ chemical and electrochemical polymerization of pyrrole onto polyester fabric

    Energy Technology Data Exchange (ETDEWEB)

    Maiti, Syamal; Das, Dipayan; Sen, Kushal, E-mail: kushal@textile.iitd.ernet.in

    2014-09-15

    Highlights: • Surface resistivity of the fabrics decreased rapidly with an increase in add-on. • Add-on and resistivity were not correlated below a resistivity value of about 200 Ω. • Higher add-on but lower surface roughness resulted in lower surface resistivity. • The voltage–current and voltage–temperature behaviours were found to be non-linear. • Electro-conductive fabric exhibited 98% electromagnetic shielding efficiency. - Abstract: This paper reports a study on electro-conductive fabrics prepared by a combined in situ chemical and electrochemical polymerization of pyrrole. Specific observations are made to establish the roles of add-on and surface roughness on the surface resistivity of the electro-conductive fabrics. The performance characteristics of the fabrics are reported in terms of electrical conductivity, voltage–current and voltage–temperature characteristics and electromagnetic interference (EMI) shielding capability. The surface resistivity of the fabric was found to be as low as 11.79 Ω. The voltage–current profile of the fabric is observed to be non-ohmic as well as the voltage–temperature curve is found to be exponential. The EMI shielding efficiency of the fabric was found to be about 98%.

  2. Electropolymerization of pyrrole on oxidizable metal under high frequency ultrasound irradiation. Application of focused beam to a selective masking technique

    Energy Technology Data Exchange (ETDEWEB)

    Et Taouil, A. [Institut UTINAM, UMR 6213 CNRS, Universite de Franche-Comte, 30 Avenue de l' observatoire, 25009 Besancon Cedex (France); Lallemand, F., E-mail: fabrice.lallemand@univ-fcomte.f [Institut UTINAM, UMR 6213 CNRS, Universite de Franche-Comte, 30 Avenue de l' observatoire, 25009 Besancon Cedex (France); Hallez, L.; Hihn, J-Y. [Institut UTINAM, UMR 6213 CNRS, Universite de Franche-Comte, 30 Avenue de l' observatoire, 25009 Besancon Cedex (France)

    2010-12-01

    A novel masking technique against polymer deposition based on High Intensity Focused Ultrasound (HIFU) irradiation was developed for the first time. With this in mind, a variety of background salts were tested. Sodium salicylate was found to be the most effective electrolytic medium for pyrrole sonoelectropolymerization on copper as it leads to a very efficient passivating oxide layer preventing copper dissolution while enabling polymer formation independently from sonication. In such a medium, high frequency ultrasound greatly refines surface structure, and a slight increase in doping level is observed. Finally, it was proved that focused ultrasound increases copper dissolution in sodium oxalate electrolyte while preventing polypyrrole deposition. A selected zone on the copper substrate was thus irradiated by the focused ultrasound beam to protect it from polymerization. In a second stage, a self-assembled monolayer was deposited on this polymer-free area to create a surface biphased substrate. This type of masking technique can be proposed as an interesting alternative to lithography as it is easier to carry out and allows chemical waste reduction.

  3. Characterization of poly pyrrole/montmorillonite electro polymerised onto Pt; Caracterizacao de filmes PPy/montmorilonita eletropolimerizados sobre Pt

    Energy Technology Data Exchange (ETDEWEB)

    Castagno, K.R.L., E-mail: katiarlc@pelotas.ifsul.edu.b [Instituto Federal Sul-rio-grandense (IFSul), RS (Brazil). Dept. de Quimica; Azambuja, D.S.; Dalmoro, V.; Mauller, R.S. [Universidade Federal do Rio Grande do Sul (UFRGS), Pelotas, RS (Brazil). Inst. de Quimica

    2010-07-01

    In this study films of polypyrrole/montmorillonite (PPy/MT) were electropolymerized on platinum in order to evaluate the performance of this technique in the preparation of nanocomposite materials and to determine the thermal properties and conductivity of the composites. The films were synthesized from a solution containing pyrrole, dodecylbenzene sulfonate, acid and two types of clays: montmorillonite-Na + (MT-Na) and montmorillonite-30B (MT-M). The characterization of the films we have used FT-IR, TEM, XRD, TGA, DSC and resistivity measurement by the four-point van der Pauw method. The study showed that the adopted method of exfoliation and the electropolymerization method used, allows obtaining nanocomposite materials. Analyses of FT-IR, TEM and XRD show that the clays are exfoliated in the polymer matrix. Thermal analysis of the films indicates that the addition of clay reflects an enhancement in the thermal properties of the matrix of PPy, but decreases the conductivity of the same. (author)

  4. Synthesis of Poly pyrrole Inverse Opal in [bmim] Containing Acetonitrile and the Application of the Inverse Opal in Cell Prototype

    International Nuclear Information System (INIS)

    Yan, W.; Dong, Q.Q.; Sun, L.N.; Deng, W.; Wu, Sh.

    2013-01-01

    Most primary cells use Zn or Li as the anode, a metallic oxide as the cathode, and an acidic or alkaline solution or moist past as the electrolytic solution. In this paper, highly ordered poly pyrrole (PPy) inverse opals have been successfully synthesized in the acetonitrile solution containing [bmim]PF 6 . PPy films were prepared under the same experimental conditions. Cyclic voltammograms of the PPy film and the PPy inverse opal in neutral phosphate buffer solution (PBS) were recorded. X-ray photoelectron spectroscopy technique was used to investigate the structural surface of the PPy films and the PPy inverse opals. It is found that the PF 6 - anions kept de doping from the PPy films during the potential scanning process, resulting in the electrochemical inactivity. Although PF 6 - anions also kept de doping from the PPy inverse opals, the PO 4 3- anions from PBS could dope into the inverse opal, explaining why the PPy inverse opals kept their electrochemical activity. An environmental friendly cell prototype was constructed, using the PPy inverse opal as the anode. The electrolytes in both the cathodic and anodic half-cells were neutral PBSs. The open-circuit potential of the cell prototype reached 0.487 V and showed a stable output over several hundred hours

  5. Sub-10 nm Platinum Nanocrystals with Size and Shape Control: Catalytic Study for Ethylene and Pyrrole Hydrogenation

    Energy Technology Data Exchange (ETDEWEB)

    Tsung, Chia-Kuang; Kuhn, John N.; Huang, Wenyu; Aliaga, Cesar; Hung, Ling-I; Somorjai, Gabor A.; Yang, Peidong

    2009-03-02

    Platinum nanocubes and nanopolyhedra with tunable size from 5 to 9 nm were synthesized by controlling the reducing rate of metal precursor ions in a one-pot polyol synthesis. A two-stage process is proposed for the simultaneous control of size and shape. In the first stage, the oxidation state of the metal ion precursors determined the nucleation rate and consequently the number of nuclei. The reaction temperature controlled the shape in the second stage by regulation of the growth kinetics. These well-defined nanocrystals were loaded into MCF-17 mesoporous silica for examination of catalytic properties. Pt loadings and dispersions of the supported catalysts were determined by elemental analysis (ICP-MS) and H2 chemisorption isotherms, respectively. Ethylene hydrogenation rates over the Pt nanocrystals were independent of both size and shape and comparable to Pt single crystals. For pyrrole hydrogenation, the nanocubes enhanced ring-opening ability and thus showed a higher selectivity to n-butylamine as compared to nanopolyhedra.

  6. Synthesis of 1-((4-methoxyphenyl-3-alkynes-1H-pyrrole-2,5-diones and functionalization to tria

    Directory of Open Access Journals (Sweden)

    Bakhat Ali

    2017-05-01

    Full Text Available A series of alkynyl maleimides were prepared via one-step cross-coupling reaction using bromomaleimide and acetylenes under the Sonogashira conditions, affording 1-((4-methoxyphenyl-3-alkynes-1H-pyrrole-2,5-diones in good to high yields. These products were subsequently converted in the corresponding 1,2,3-triazole using conventional click chemistry approach. The alkynyl maleimide compound (8g crystallized in the triclinic space group P1 with unit cell parameters a = 5.3692(6, b = 9.2513(10, c = 10.3070(11 Å, α = 85.349(4, β = 86.892(4, γ = 86.892(4°, V = 507.31(10 Å3, and Z = 1. In the crystal the molecules are stacked parallel to the c axis and held together through a C–H⋯π and a C–H⋯O interaction.

  7. Electrochemical characteristics of coated steel with poly(N-methyl pyrrole) synthesized in presence of ZnO nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Mahmoudian, M.R., E-mail: M_R_mahmoudian@yahoo.com [Department of Chemistry, University of Malaya, Kuala Lumpur 50603 (Malaysia); Department of Chemistry, Masjed-Soleiman Branch, Islamic Azad University, Masjed-Soleiman (Iran, Islamic Republic of); Basirun, W.J.; Alias, Y. [Department of Chemistry, University of Malaya, Kuala Lumpur 50603 (Malaysia); Khorsand Zak, A. [Low Dimensional Materials Research Center, Department of Physics, University of Malaya, 50603 Kuala Lumpur (Malaysia)

    2011-10-31

    Poly(N-methyl pyrrole) (PMPy) coating was electrodeposited on steel substrates in mixed electrolytes of dodecyl benzene sulphonic acid with oxalic acid in the absence and the presence of ZnO nanoparticles (NPs). The morphology and compositions were characterized by Field Emission Scanning Electron Microscopy (FESEM), Fourier Transform Infrared Spectroscopy and Energy-dispersive X-ray spectroscopy. Electrode/coating/electrolyte system was studied by Electrochemical Impedance Spectroscopy. The comparison between the pore resistance (R{sub po}) of synthesized PMPy in the absence and presence of ZnO NPs indicated that the existence of ZnO increased the R{sub po} of the coating. The FESEM micrographs indicated that the size of micro-spherical grains in the morphology of PMPy is significantly reduced and the surface area of PMPy is increased with the presence of ZnO NPs. The increase of the ability to interact with the ions liberated during the corrosion reaction of steel and the increase of the rate probability for the occurrence of cathodic reduction of oxygen on the PMPy with the increase of the surface area can be considered as reasons for improvement of protective properties of synthesized PMPy in the presence of ZnO NPs.

  8. Characterization of electro-conductive fabrics prepared by in situ chemical and electrochemical polymerization of pyrrole onto polyester fabric

    International Nuclear Information System (INIS)

    Maiti, Syamal; Das, Dipayan; Sen, Kushal

    2014-01-01

    Highlights: • Surface resistivity of the fabrics decreased rapidly with an increase in add-on. • Add-on and resistivity were not correlated below a resistivity value of about 200 Ω. • Higher add-on but lower surface roughness resulted in lower surface resistivity. • The voltage–current and voltage–temperature behaviours were found to be non-linear. • Electro-conductive fabric exhibited 98% electromagnetic shielding efficiency. - Abstract: This paper reports a study on electro-conductive fabrics prepared by a combined in situ chemical and electrochemical polymerization of pyrrole. Specific observations are made to establish the roles of add-on and surface roughness on the surface resistivity of the electro-conductive fabrics. The performance characteristics of the fabrics are reported in terms of electrical conductivity, voltage–current and voltage–temperature characteristics and electromagnetic interference (EMI) shielding capability. The surface resistivity of the fabric was found to be as low as 11.79 Ω. The voltage–current profile of the fabric is observed to be non-ohmic as well as the voltage–temperature curve is found to be exponential. The EMI shielding efficiency of the fabric was found to be about 98%

  9. An alternative laser driven photodissociation mechanism of pyrrole via πσ*1∕S0 conical intersection.

    Science.gov (United States)

    Nandipati, K R; Lan, Z; Singh, H; Mahapatra, S

    2017-06-07

    A first principles quantum dynamics study of N-H photodissociation of pyrrole on the S 0 - 1 πσ * (A21) coupled electronic states is carried out with the aid of an optimally designed UV-laser pulse. A new photodissociation path, as compared to the conventional barrier crossing on the πσ*1 state, opens up upon electronic transitions under the influence of pump-dump laser pulses, which efficiently populate both the dissociation channels. The interplay of electronic transitions due both to vibronic coupling and the laser pulse is observed in the control mechanism and discussed in detail. The proposed control mechanism seems to be robust, and not discussed in the literature so far, and is expected to trigger future experiments on the πσ*1 photochemistry of molecules of chemical and biological importance. The design of the optimal pulses and their application to enhance the overall dissociation probability is carried out within the framework of optimal control theory. The quantum dynamics of the system in the presence of pulse is treated by solving the time-dependent Schrödinger equation in the semi-classical dipole approximation.

  10. An alternative laser driven photodissociation mechanism of pyrrole via π*1σ/S0 conical intersection

    Science.gov (United States)

    Nandipati, K. R.; Lan, Z.; Singh, H.; Mahapatra, S.

    2017-06-01

    A first principles quantum dynamics study of N-H photodissociation of pyrrole on the S0-1π σ*(A12) coupled electronic states is carried out with the aid of an optimally designed UV-laser pulse. A new photodissociation path, as compared to the conventional barrier crossing on the π*1σ state, opens up upon electronic transitions under the influence of pump-dump laser pulses, which efficiently populate both the dissociation channels. The interplay of electronic transitions due both to vibronic coupling and the laser pulse is observed in the control mechanism and discussed in detail. The proposed control mechanism seems to be robust, and not discussed in the literature so far, and is expected to trigger future experiments on the π*1σ photochemistry of molecules of chemical and biological importance. The design of the optimal pulses and their application to enhance the overall dissociation probability is carried out within the framework of optimal control theory. The quantum dynamics of the system in the presence of pulse is treated by solving the time-dependent Schrödinger equation in the semi-classical dipole approximation.

  11. Preparation of thin α-particle sources using poly-pyrrole films functionalized by a chelating agent

    International Nuclear Information System (INIS)

    Mariet, C.

    2000-01-01

    This work takes place in the scope of analysis of the α-particle emitting elements U, Pu and Am present in compound environmental matrix like sols and sediments. The samples diversity and above all the α-ray characteristics require the analyst to implement a sequence of chemical steps in which the more restricting is the actinides concentration in a uniform and thin layer en allowing an accurately measure of alpha activity. On this account, we studied a new technique for radioactive sources preparation based on tow steps: preparation of a thin film as source support; incorporation of radioactive elements by a chelating extraction mechanism. The thin films were obtained through electro-polymerization of pyrrole monomer functionalized by an chelating ligand able to extract actinides from concentrated acidic solutions. Polymerization conditions of this monomer were perfected, then obtained films were characterized from a physico-chemical point of view. We point out their extracting properties were comparable to (retention capacity, distribution coefficient) to those of usual ion-exchange resins. The underscore of uranyl and americium nitrate complexes formed in the thin layer allowed to calculate the extraction constants in case acid extraction is negligible. Thanks to this results, the values of the coefficients distribution D U and D Am could be provided for all nitric solutions in which acid extraction is negligible. Optimal actinides retention conditions in the polymer were defined and used to settle a protocol for plutonium analysis in environmental samples. (author)

  12. Fe{sub 2}O{sub 3}-Poly-pyrrole hybrid nano-composite materials for super-capacitors

    Energy Technology Data Exchange (ETDEWEB)

    Mallouki, M.; Tran-Van, F.; Sarrazin, C.; Chevrot, C. [Cergy-Pontoise Univ., Lab. de Physicochimie des Polymeres et des Interfaces (LPPI), EA 2528 95 (France); Fauvarque, J.F. [CNAM, Lab. d' Electrochimie Industrielle, 75 - Paris (France); Simon, P. [Universite Paul Sabatier, CIRIMAT-LCMIE, UMR 5085, 31 - Toulouse (France); De, A. [Saha Institute of Nuclear Physics, Calcutta (India)

    2004-07-01

    Fe{sub 2}O{sub 3}-Poly-pyrrole hybrid nano-composite materials chemically synthesized from colloid particles of iron oxide in aqueous solution have been processed to realize electrode materials for super-capacitor applications. The performances have been evaluated by cyclic voltammetry and galvano-static techniques in a three-electrode cell. The capacitance of Fe{sub 2}O{sub 3}-PPy hybrid nano-composite doped with para-toluene-sulfonate reaches 47 mAh/g in PC/NEt{sub 4}BF{sub 4} with a good stability during cycling (loss of 3% after 1000 cycles). Transmission Electronic Microscopy indicates a porous nano-structure with spherical particles in a range of 400-500 nm which ensures a good accessibility of the electrolyte in the bulk of the electro-active hybrid material. Preliminary studies with room temperature ionic liquid show promising results since the specific capacitance reaches 427 F/g in 1- ethyl-3-methyl-imidazolium bis((tri-fluoro-methyl)sulfonyl)amide (EMITFSI). (authors)

  13. Sequence-selective single-molecule alkylation with a pyrrole-imidazole polyamide visualized in a DNA nanoscaffold.

    Science.gov (United States)

    Yoshidome, Tomofumi; Endo, Masayuki; Kashiwazaki, Gengo; Hidaka, Kumi; Bando, Toshikazu; Sugiyama, Hiroshi

    2012-03-14

    We demonstrate a novel strategy for visualizing sequence-selective alkylation of target double-stranded DNA (dsDNA) using a synthetic pyrrole-imidazole (PI) polyamide in a designed DNA origami scaffold. Doubly functionalized PI polyamide was designed by introduction of an alkylating agent 1-(chloromethyl)-5-hydroxy-1,2-dihydro-3H-benz[e]indole (seco-CBI) and biotin for sequence-selective alkylation at the target sequence and subsequent streptavidin labeling, respectively. Selective alkylation of the target site in the substrate DNA was observed by analysis using sequencing gel electrophoresis. For the single-molecule observation of the alkylation by functionalized PI polyamide using atomic force microscopy (AFM), the target position in the dsDNA (∼200 base pairs) was alkylated and then visualized by labeling with streptavidin. Newly designed DNA origami scaffold named "five-well DNA frame" carrying five different dsDNA sequences in its cavities was used for the detailed analysis of the sequence-selectivity and alkylation. The 64-mer dsDNAs were introduced to five individual wells, in which target sequence AGTXCCA/TGGYACT (XY = AT, TA, GC, CG) was employed as fully matched (X = G) and one-base mismatched (X = A, T, C) sequences. The fully matched sequence was alkylated with 88% selectivity over other mismatched sequences. In addition, the PI polyamide failed to attach to the target sequence lacking the alkylation site after washing and streptavidin treatment. Therefore, the PI polyamide discriminated the one mismatched nucleotide at the single-molecule level, and alkylation anchored the PI polyamide to the target dsDNA.

  14. A Role for 2-Methyl Pyrrole in the Browning of 4-Oxopentanal and Limonene Secondary Organic Aerosol

    Energy Technology Data Exchange (ETDEWEB)

    Aiona, Paige K. [Department; Lee, Hyun Ji [Department; Lin, Peng [Department; Heller, Forrest [Environmental; Laskin, Alexander [Department; Laskin, Julia [Department; Nizkorodov, Sergey A. [Department

    2017-09-15

    “Brown Carbon” (BrC) is a type of organic particulate matter that absorbs visible and near ultraviolet radiation. Reactions of carbonyls in secondary organic aerosol (SOA) produced from limonene with ammonia (NH3) or ammonium sulfate (AS) are known to produce BrC with a distinctive absorption band at 500 nm. Although the general mechanism for this process has been proposed in previous studies, the specific molecular structures of the light-absorbing species remain unclear. This study examined the browning processes occurring in aqueous solutions of AS and 4-oxopentanal (4-OPA), which has a 1,4-dicarbonyl structural motif present in many limonene SOA compounds. The reaction of 4-OPA with AS in a bulk aqueous solution produces a 2-methyl pyrrole (2-MP) intermediate, which is not a strong light absorber by itself, but can react further with carbonyl compounds leading to the eventual formation of BrC chromophores. The direct involvement of 2-MP in the browning process was demonstrated by reacting 2-MP with 4-OPA and with limonene SOA, both of which produced BrC chromophores with distinctive absorption bands at visible wavelengths. The formation of BrC in reaction of 4-OPA with AS and ammonium nitrate (AN) was found to be accelerated by evaporation of the solution suggesting an important role of the dehydration processes in BrC formation from 1,4- dicarbonyls. 4-OPA was also found to produce BrC in aqueous reactions with a broad spectrum of amino acids and amines. The results suggest that 4-OPA may be the smallest atmospherically relevant compound capable of browning by the same mechanism as limonene SOA.

  15. Effects of altered platelet number on pulmonary hypertension and platelet sequestration in monocrotaline pyrrole-treated rats

    International Nuclear Information System (INIS)

    White, S.M.; Wagner, J.G.; Roth, R.A.

    1989-01-01

    To study the role of platelets in monocrotaline pyrrole (MCTP)-induced pulmonary hypertension, pulmonary sequestration of 111In-labeled platelets in rats treated with MCTP and anti-rat platelet serum (PAS) was examined. Lung injury from a single, intravenous injection of MCTP (3.5 mg/kg) at Day 8 was evident as elevated lung weight and lavage fluid protein and lactate dehydrogenase activity. Additionally, right ventricular hypertrophy and elevated pulmonary arterial pressures (PAP) occurred. Treatment with PAS on Days 6-8 did not affect the lung injury but resulted in an attenuation of the pulmonary hypertensive response. Pulmonary platelet sequestration was also decreased in PAS-treated rats, yet the sequestration in the lungs of MCTP-treated rats that received PAS was significantly higher than that in the lungs of N,N-dimethylformamide (DMF) controls. MCTP-treated rats receiving control serum (CS) tended to sequester more 111In-labeled platelets than respective DMF controls, but this was not statistically significant. Blood platelet half-life was unaltered in rats receiving CS. When rats were treated similarly with MCTP and PAS and were killed at 18 days, the attenuation of the pulmonary hypertensive response previously described was not observed, and lung injury was more extensive than when CS was given. Apparently, platelet depletion delayed the development of the pulmonary hypertensive response. Supranormal platelet numbers produced by splenectomy did not affect MCTP-induced lung injury or the elevation in PAP. These results support the hypothesis that the development of MCTP-induced pulmonary hypertension is mediated in part by platelets

  16. PTCA (1H-pyrrole-2,3,5-tricarboxylic acid) as a marker for oxidative hair treatment.

    Science.gov (United States)

    Petzel-Witt, Silvana; Meier, Sylvia I; Schubert-Zsilavecz, Manfred; Toennes, Stefan W

    2018-04-01

    Hair analysis for the assessment of alcohol or drug abstinence has become a routine procedure in forensic toxicology. Hair coloration leading to loss of incorporated xenobiotics and to false negative results has turned out to be a major problem. Currently only colored extracts provide hints of manipulations but not bleaching. A liquid chromatographic-tandem mass spectrometric (LC-MS/MS) method was developed and validated to determine 1H-pyrrole-2,3,5-tricarboxylic acid (PTCA), a major oxidation product of melanin. PTCA was determined in natural hair samples (n = 21) after treatment with 3% hydrogen peroxide (H 2 O 2 ) for 30 or 40 minutes with concentrations up to 12% for 40 minutes. In another series, 12 natural hair samples were submitted to different coloration procedures (henna, tinting, semi-permanent and permanent dyeing, bleaching) and the changes in PTCA content were determined. A significant increase in the PTCA content was found for both incubation times and increasing H 2 O 2 concentrations. Coloration with henna or tinting had no influence on PTCA levels detected, but a significant increase was observed after semi-permanent and permanent dyeing and bleaching. As PTCA concentrations in natural hair were found to be in a range of <2.1-16.4 ng/mg (8.4 ± 3.8 ng/mg, mean ± SD, n = 33), a cut-off of 20 ng/mg is recommended for the distinction between natural vs. excessively oxidized hair. In case of naturally low melanin content (light-blond or white hair), no marked increase in PTCA may occur. The present study demonstrated that PTCA is formed during oxidative treatment of melanin in hair, which can be used to detect previous hair coloration including oxidation. Copyright © 2017 John Wiley & Sons, Ltd.

  17. Poly (pyrrole-co-aniline) hollow nanosphere supported Pd nanoflowers as high-performance catalyst for methanol electrooxidation in alkaline media

    International Nuclear Information System (INIS)

    Fard, Leyla Abolghasemi; Ojani, Reza; Raoof, Jahan Bakhsh; Zare, Ehsan Nazarzadeh; Lakouraj, Moslem Mansour

    2017-01-01

    In this work, first poly (pyrrole-co-aniline) (PPCA) hollow nanosphere (HN) as a catalyst support material is fabricated through in-situ emulsion polymerization. Then we reported a one-step and template-free approach to fabricate Pd NFs on a PPCA HN coated glassy carbon electrode by a facile electrochemical approach. Several techniques such as FTIR (Fourier transform infrared spectroscopy), SEM (scanning electron microscopy) and EDS (energy dispersive spectroscopy) were utilized for the characterization of the synthesized materials. The catalytic performance of Pd NFs/PPCA HN catalyst is evaluated by cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy toward methanol oxidation as a model reaction in alkaline media. The comparison of specific activities for Pd NFs/PPCA HN (1.79 mA cm"−"2), Pd NFs/PPy (1.28 mA cm"−"2), Pd NFs/PANI (0.93 mA cm"−"2) and Pd NFs (0.78 mA cm"−"2) shows that the PPCA supported Pd NFs with high surface area exhibits the excellent electrocatalytic activity than other electrodes for the electro-oxidation reaction in alkaline media. This might be due to the easier charge transfer at conductive copolymer interfaces, higher electrochemically accessible surface areas and electronic conductivity. This strategy provides a promising platform for direct methanol fuel cells. - Highlights: • Pd nanoflowers supported on poly (pyrrole-co-aniline) hollow nanosphere is prepared by a facile electrochemical approach. • The as-prepared nanocatalyst displays the enhanced electrocatalytic activity and stability for methanol oxidation. • The high performance is attributed to facile electron transfer on poly (pyrrole-co-aniline) hollow nanosphere substrate.

  18. Diethyl 2,2′-({[1,4-phenylenebis(azanediyl]bis(methylene}bis(1H-pyrrole-2,1-diyldiacetate

    Directory of Open Access Journals (Sweden)

    Jasim Alshawi

    2016-01-01

    Full Text Available The complete molecule of the title compound, C24H30N4O4, is generated by crystallographic inversion symmetry. The molecule is S-shaped and the pyrrole groups have an anti or trans confirmation with respect to the central benzene ring, to which they are inclined by 76.38 (9°. In the crystal, molecules are linked via C—H...O hydrogen bonds, forming layers parallel to the ac plane. Within the layers there are C—H...π interactions present. There are, however, no significant interactions between the layers.

  19. Structure and spectroscopic properties of N,S-coordinating 2-methyl-sulfanyl-N-[(1H-pyrrol-2-yl)methyl-idene]aniline methanol monosolvate.

    Science.gov (United States)

    Richards, D Douglas; Ang, M Trisha C; McDonald, Robert; Bierenstiel, Matthias

    2015-10-01

    The reaction of pyrrole-2-carboxaldehyde and 2-(methyl-sulfan-yl)aniline in refluxing methanol gave an olive-green residue in which yellow crystals of the title compound, C12H12N2S·CH3OH, were grown from slow evaporation of methanol at 263 K. In the crystal, hydrogen-bonding inter-actions link the aniline mol-ecule and a nearby methanol solvent mol-ecule. These units are linked by a pair of weak C-H⋯Omethanol interactions, forming inversion dimers consisting of two main molecules and two solvent molecules.

  20. Rhodium/Silver-Cocatalyzed Transannulation of N-Sulfonyl-1,2,3-triazoles with Vinyl Azides: Divergent Synthesis of Pyrroles and 2 H-Pyrazines.

    Science.gov (United States)

    Zhang, Lin; Sun, Ge; Bi, Xihe

    2016-11-07

    The first cyclization reaction between vinyl azides and N-sulfonyl-1,2,3-triazoles is reported. A Rh/Ag binary metal catalyst system proved to be necessary for the successful cyclization. By varying the structure of vinyl azides, such reaction allows the divergent synthesis of pyrroles and 2H-pyrazines. The cyclization reactions feature a broad substrate scope, good functional group tolerance, high reaction efficiency, and good to high product yields. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Structure and spectroscopic properties of N,S-coordinating 2-methylsulfanyl-N-[(1H-pyrrol-2-ylmethylidene]aniline methanol monosolvate

    Directory of Open Access Journals (Sweden)

    D. Douglas Richards

    2015-10-01

    Full Text Available The reaction of pyrrole-2-carboxaldehyde and 2-(methylsulfanylaniline in refluxing methanol gave an olive-green residue in which yellow crystals of the title compound, C12H12N2S·CH3OH, were grown from slow evaporation of methanol at 263 K. In the crystal, hydrogen-bonding interactions link the aniline molecule and a nearby methanol solvent molecule. These units are linked by a pair of weak C—H...Omethanol interactions, forming inversion dimers consisting of two main molecules and two solvent molecules.

  2. Conjugated and fluorescent polymer based on dansyl-substituted pyrrole prepared by electrochemical polymerization in acetonitrile containing boron trifluoride diethyl etherate

    International Nuclear Information System (INIS)

    Almeida, Andresa K.A.; Dias, Jéssica M.M.; Silva, Ana Julia C.; Santos, Diego P.; Navarro, Marcelo; Tonholo, Josealdo; Goulart, Marília O.F.; Ribeiro, Adriana S.

    2014-01-01

    Graphical abstract: - Highlights: • A fluorescent pyrrole derivative bearing a dansyl substituent (PyPDG) was synthesized. • PyPDG was electropolymerized onto ITO in (C 4 H 9 ) 4 NBF 4 /CH 3 CN/BFEE mixed electrolyte. • The resulting polymer (PPyPDG) films displayed electrochromic behavior. • PPyPDG is a good green light emitter material. - Abstract: A fluorescent pyrrole derivative bearing a dansyl substituent was prepared by a simple synthetic route and electropolymerized onto Indium Tin Oxide (ITO) electrodes. The presence of the dansyl group in the monomer precursor prevents the electropolymerization in usual systems, such as (C 4 H 9 ) 4 NBF 4 in acetonitrile (CH 3 CN). For this reason, it was added 20% boron trifluoride diethyl etherate (BFEE) to this system, to achieve electropolymerization. The resulting poly[3-(N-pyrrolyl)propyl dansylglycinate] (PPyPDG) films displayed electrochromic behavior. Their color varied from greenish-yellow, in the neutral state, to greyish-green, in the oxidized state; moreover PPyPDG is a good green light emitter material. Therefore, PPyPDG films might be potentially applicable in displays and optoelectronic devices

  3. Applicability of new spin trap agent, 2-diphenylphosphinoyl-2-methyl-3,4-dihydro-2H-pyrrole N-oxide, in biological system

    International Nuclear Information System (INIS)

    Karakawa, Tomohiro; Sato, Keizo; Muramoto, Yosuke; Mitani, Yoshihiro; Kitamado, Masataka; Iwanaga, Tatsuya; Nabeshima, Tetsuji; Maruyama, Kumiko; Nakagawa, Kazuko; Ishida, Kazuhiko; Sasamoto, Kazumi

    2008-01-01

    Electron spin resonance using spin-trapping is a useful technique for detecting direct reactive oxygen species, such as superoxide (O 2 .- ). However, the widely used spin trap 2,2-dimethyl-3,4-dihydro-2H-pyrrole N-oxide (DMPO) has several fundamental limitations in terms of half-life and stability. Recently, the new spin trap 2-diphenylphosphinoyl-2-methyl-3,4-dihydro-2H-pyrrole N-oxide (DPhPMPO) was developed by us. We evaluated the biological applicability of DPhPMPO to analyze O 2 .- in both cell-free and cellular systems. DPhPMPO had a larger rate constant for O 2 .- and formed more stable spin adducts for O 2 .- than DMPO in the xanthine/xanthine oxidase (X/XO) system. In the phorbol myristate acetate-activated neutrophil system, the detection potential of DPhPMPO for O 2 .- was significantly higher than that of DMPO (k DMPO = 13.95 M -1 s -1 , k DPhPMPO = 42.4 M -1 s -1 ). These results indicated that DPhPMPO is a potentially good candidate for trapping O 2 .- in a biological system

  4. New pyrrole inhibitors of monoamine oxidase: synthesis, biological evaluation, and structural determinants of MAO-A and MAO-B selectivity.

    Science.gov (United States)

    La Regina, Giuseppe; Silvestri, Romano; Artico, Marino; Lavecchia, Antonio; Novellino, Ettore; Befani, Olivia; Turini, Paola; Agostinelli, Enzo

    2007-03-08

    A series of new pyrrole derivatives have been synthesized and evaluated for their monoamine oxidase (MAO) A and B inhibitory activity and selectivity. N-Methyl,N-(benzyl),N-(pyrrol-2-ylmethyl)amine (7) and N-(2-benzyl),N-(1-methylpyrrol-2-ylmethyl)amine (18) were the most selective MAO-B (7, SI = 0.0057) and MAO-A (18, SI = 12500) inhibitors, respectively. Docking and molecular dynamics simulations gave structural insights into the MAO-A and MAO-B selectivity. Compound 18 forms an H-bond with Gln215 through its protonated amino group into the MAO-A binding site. This H-bond is absent in the 7/MAO-A complex. In contrast, compound 7 places its phenyl ring into an aromatic cage of the MAO-B binding pocket, where it forms charge-transfer interactions. The slightly different binding pose of 18 into the MAO-B active site seems to be forced by a bulkier Tyr residue, which replaces a smaller Ile residue present in MAO-A.

  5. High content of pyridinic- and pyrrolic-nitrogen-modified carbon nanotubes derived from blood biomass for the electrocatalysis of oxygen reduction reaction in alkaline medium

    International Nuclear Information System (INIS)

    Zheng, Jie; Guo, Chaozhong; Chen, Chunyan; Fan, Mingzhi; Gong, Jianping; Zhang, Yanfang; Zhao, Tianxin; Sun, Yuelin; Xu, Xiaofan; Li, Mengmeng; Wang, Ran; Luo, Zhongli; Chen, Changguo

    2015-01-01

    Graphical abstract: Display Omitted -- Highlights: •An ORR electrocatalyst was fabricated from blood biomass and carbon nanotube. •The N-CNT catalyst exhibits good ORR activity, methanol resistance and stability. •The pyrolysis process produces high contents of pyridinic and pyrrolic N species. •The pyridinic-N group may play more important role in the active sites for ORR. -- Abstract: Here we present a facile synthetic route to design nitrogen-doped nanostructured carbon-based electrocatalyst for oxygen reduction reaction (ORR) by the copyrolysis of blood biomass from pig and carbon nanotubes (CNTs) at high temperatures. The nitrogen-doped CNTs obtained at 800 °C not only results in excellent ORR activity with four-electron transfer selectivity in alkaline medium, but also exhibits superior methanol-tolerant property and long-term stability. It is confirmed that high-temperature pyrolysis processes can facilitate to produce higher contents of pyridinic- and pyrrolic-N binding groups in electrocatalysts, contributing to the enhancement of ORR performance in terms of onset potential, half-wave potential, and limited current density. We also propose that the planar-N configuration may be the active site that is responsible for the improved ORR electrocatalytic performance. The straight-forward and cheap synthesis of the active and stable electrocatalyst makes it a promising candidate for electrochemical power sources such as fuel cells or metal-air batteries

  6. Influence of electron delocalization in heterocyclic core systems on the electrochemical communication in 2,5-di- and 2,3,4,5-tetraferrocenyl thiophenes, furans, and pyrroles.

    Science.gov (United States)

    Hildebrandt, Alexander; Schaarschmidt, Dieter; Claus, Ron; Lang, Heinrich

    2011-11-07

    A series of 2,5-di- and 2,3,4,5-tetraferrocenyl-substituted thiophenes, furans, and pyrroles were synthesized using the Negishi C,C cross-coupling protocol. The electronic and electrochemical properties of these compounds were investigated by cyclic voltammetry (CV), square wave voltammetry (SWV), and in situ UV-vis/NIR spectroscopy. The molecular structures of 2,5-diferrocenyl furan and 2,3,4,5-tetraferrocenyl-1-methyl-1H-pyrrole in the solid state are discussed. The ferrocenyls could sequentially be oxidized giving two or four reversible responses for the appropriate di- or tetraferrocenyl-substituted heterocyclic molecules. The observed ΔE°' values range between 186 and 450 mV. The NIR measurements confirm electronic communication as intervalence charge transfer (IVCT) absorptions were found in the corresponding mono- and in case of the tetraferrocenyl compounds also in the dicationic species. All compounds, except tetraferrocenyl thiophene (a class I system), were classified as class II systems according to Robin and Day. They show a linear relationship between ΔE°' and the IVCT oscillator strength f which could be shown for the first time in organometallic chemistry. This was possible because the series of molecules exhibit analogous geometries and hence, similar electrostatic properties. This correlation was confirmed by electro- and spectro-electrochemical measurements. Within these studies a new approach for the estimation of the effective electron transfer distances r(ab) is discussed. © 2011 American Chemical Society

  7. Sulfur-containing constituents and one 1H-pyrrole-2-carboxylic acid derivative from pineapple [Ananas comosus (L.) Merr.] fruit.

    Science.gov (United States)

    Zheng, Zong-Ping; Ma, Jinyu; Cheng, Ka-Wing; Chao, Jianfei; Zhu, Qin; Chang, Raymond Chuen-Chung; Zhao, Ming; Lin, Zhi-Xiu; Wang, Mingfu

    2010-12-01

    Two sulfur-containing compounds, (S)-2-amino-5-((R)-1-carboxy-2-((E)-3-(4-hydroxy-3-methoxyphenyl)allylthio)ethyl-amino)-5-oxopentanoic acid (1) and (S)-2-amino-5-((R)-1-(carboxymethylamino)-3-((E)-3-(4-hydroxyphenyl)allylthio)-1-oxopropan-2-ylamino)-5-oxopentanoic acid (2), and one 1H-pyrrole-2-carboxylic acid derivative, 6-(3-(1H-pyrrole-2-carbonyloxy)-2-hydroxypropoxy)-3,4,5-trihydroxy-tetrahydro-2H-pyran-2-carboxylic acid (3), together with eighteen known phenolic compounds, were isolated from the fruits of pineapple. Their structures were elucidated by a combination of spectroscopic analyses. Some of these compounds showed inhibitory activities against tyrosinase. The half maximal inhibitory concentration values of compounds 1, 4, 5, 6, 7 are lower than 1 mM. These compounds may contribute to the well-known anti-browning effect of pineapple juice and be potential skin whitening agents in cosmetic applications. Copyright © 2010 Elsevier Ltd. All rights reserved.

  8. Pyrrolic-N-doped graphene oxide/Fe2O3 mesocrystal nanocomposite: Efficient charge transfer and enhanced photo-Fenton catalytic activity

    Science.gov (United States)

    Liu, Bing; Tian, Lihong; Wang, Ran; Yang, Jinfeng; Guan, Rong; Chen, Xiaobo

    2017-11-01

    Though α-Fe2O3 has attracted much attention in photocatalytic or Fenton-catalytic degradation of organic contaminants, its performance is still unsatisfactory due to fast recombination of electrons and holes in photocatalytic process and the difficult conversion of Fe(II) and Fe(III) in Fenton reaction. Herein, a pyrrolic N-doped graphene oxide/Fe2O3 mesocrystal (NG-Fe2O3) nanocomposite with good distribution is synthesized by a simple solvothermal method and adjusting the oxygen-containing groups on graphene oxide. The morphology of NG-Fe2O3 contributes to a relatively large BET surface area and an intimate contact between NG and Fe2O3. These two important factors along with the excellent electro-conductivity of pyrrolic-N doped GO result in the efficient separation of electron-hole pairs and fast conversion of Fe(II)and Fe(III) in photo-Fenton synergistic reaction. Thus, a remarkably improved photo-Fenton catalytic activity of NG-Fe2O3 is obtained. The degrading rate on methyl blue increases by 1.5 times and the conversion rate of glyphosate increases by 2.3 times under visible light irradiation, compared to pristine α-Fe2O3 mesocrystals.

  9. Preparation and microwave absorbing properties of nickel-coated graphite nanosheet with pyrrole via in situ polymerization

    International Nuclear Information System (INIS)

    Yang Yongqing; Qi Shuhua; Wang Jianning

    2012-01-01

    Highlights: ► NanoG was prepared and chemically coated by nano-Ni. ► PPy/NanoG and PPy/Ni/NanoG were prepared via in situ polymerization. ► The samples were characterized by SEM, XRD, EDS and FTIR. ► PPy/NanoG and PPy/Ni/NanoG exhibit good electromagnetic properties. - Abstract: Nanocomposites PPy/NanoG and PPy/Ni/NanoG were prepared via in situ polymerization of pyrrole in the presence of NanoG and nickel-coated graphite nanosheet (Ni/NanoG), respectively. The morphologies and nanostructures of NanoG, Ni/NanoG, PPy, PPy/NanoG and PPy/Ni/NanoG were characterized by scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), Fourier transmission infrared (FTIR) and X-ray diffraction analysis (XRD). Results show that most of PPy chains disperse on NanoG and Ni/NanoG's surfaces for the high aspect ratio (300–500) of NanoG and Ni/NanoG. From the thermogravimetric analysis (TG) it can be seen that the introduction of Ni and NanoG leads the composites PPy/NanoG and PPy/Ni/NanoG to exhibit a better thermal stability than pure PPy. According to the four-point-probe test, the conductivities of the final PPy/NanoG and PPy/Ni/NanoG composites are dramatically increased compared to pure PPy. Measurement of electromagnetic parameters shows that the reflection loss (R) of PPy/Ni/NanoG is below −19 dB at the X band (8.2–12.4 GHz) and the minimum loss value is −23.46 dB at 9.88 GHz. The reflection loss of PPy/NanoG is below −10 dB at 8.2–12.4 GHz and the minimum loss value is −13.44 dB at 10.28 GHz. The microwave absorbing properties of PPy/NanoG and PPy/Ni/NanoG are superior to those of PPy.

  10. Green Synthesis of Ag and Pd Nanospheres, Nanowires, and Nanorods Using Vitamin B2: Catalytic Polymerisation of Aniline and Pyrrole

    Directory of Open Access Journals (Sweden)

    Mallikarjuna N. Nadagouda

    2008-01-01

    Full Text Available For the first time, we report green chemistry approach using vitamin B2 in the synthesis of silver (Ag and palladium (Pd, nanospheres, nanowires, and nanorods at room temperature without using any harmful reducing agents, such as sodium borohydride (NaBH4 or hydroxylamine hydrochloride and any special capping or dispersing agent. Vitamin B2 was used as reducing agent as well as capping agent due to its high-water solubility, biodegradability, and low-toxicity compared with other reducing agents. The average particle size of nanoprticle was found to be Ag (average size 6.1±0.1 nm and Pd (average size 4.1±0.1 nm nanoparticles in ethylene glycol and Ag (average size 5.9±0.1 nm, and average size 6.1±0.1 nanoparticles in acetic acid and NMP, respectively. The formation of noble multiple shape nanostructures and their self assembly were dependent on the solvent employed for the preparation. When water was used as solvent media, Ag and Pd nanoparticles started to self-assemble into rod-like structures and in isopropanol Ag and Pd nanoparticles yielded wire-like structures with a thickness in the range of 10 to 20 nm and several hundred microns in length. In acetone and acetonitrile medium, the Ag and Pd nanoparticles are self-assembled into a regular pattern making nanorod structures with thicknesses ranging from 100 to 200 nm and lengths of a few microns. The so-synthesized nanostructures were characterized using scanning electron microscopy (SEM, transmission electron microscopy (TEM, energy dispersive X-ray (EDX analysis, and UV spectroscopy. The ensuing Ag and Pd nanoparticles catalyzed the reactions of aniline and pyrrole to generate polyaniline and polypyrrole nanofibers and may find various technological and biological applications. This single-step greener approach is general and can be extended to other noble metals and transition metal oxides.

  11. Blood pyrrole-protein adducts as a diagnostic and prognostic index in pyrrolizidine alkaloid-hepatic sinusoidal obstruction syndrome.

    Science.gov (United States)

    Gao, Hong; Ruan, Jianqing Q; Chen, Jie; Li, Na; Ke, Changqiang Q; Ye, Yang; Lin, Ge; Wang, Jiyao Y

    2015-01-01

    The diagnosis of hepatic sinusoidal obstruction syndrome (HSOS) induced by pyrrolizidine alkaloids is mainly based on clinical investigation. There is currently no prognostic index. This study evaluated the quantitative measurement of blood pyrrole-protein adducts (PPAs) as a diagnostic and prognostic index for pyrrolizidine alkaloid-induced HSOS. Suspected drug-induced liver injury patients were prospectively recruited. Blood PPAs were quantitatively measured using ultra-performance liquid chromatography-tandem mass spectrometry. Patients' age, sex, biochemistry test results, and a detailed drug history were recorded. The patients were divided into two groups, ie, those with HSOS induced by pyrrolizidine alkaloid-containing drugs and those with liver injury induced by drugs without pyrrolizidine alkaloids. The relationship between herb administration, clinical outcomes, blood sampling time, and blood PPA concentration in pyrrolizidine alkaloid-associated HSOS patients was analyzed using multiple linear regression analysis. Forty patients met the entry criteria, among whom 23 had pyrrolizidine alkaloid-associated HSOS and 17 had liver injury caused by drugs without pyrrolizidine alkaloids. Among the 23 patients with pyrrolizidine alkaloid-associated HSOS, ten recovered, four developed chronic disease, eight died, and one underwent liver transplantation within 6 months after onset. Blood PPAs were detectable in 24 of 40 patients with concentrations from 0.05 to 74.4 nM. Sensitivity and specificity of the test for diagnosis of pyrrolizidine alkaloid-associated HSOS were 100% (23/23) and 94.1% (23/24), respectively. The positive predictive value was 95.8% and the negative predictive value was 100%, whereas the positive likelihood ratio was 23.81. The level of blood PPAs in the severe group (died or received liver transplantation) was significantly higher than that in the recovery/chronicity group (P=0.004). Blood PPAs measured by ultra-performance liquid

  12. Ordering effects in benzo[1,2-b:4,5-b']difuran-thieno[3,4-c]pyrrole-4,6- dione polymers with >7% solar cell efficiency

    KAUST Repository

    Warnan, Julien; Cabanetos, Clement; El Labban, Abdulrahman; Hansen, Michael Ryan; Tassone, Christopher J.; Toney, Michael F.; Beaujuge, Pierre

    2014-01-01

    Benzo[1,2-b:4,5-b']difuran-thieno[3,4-c]pyrrole-4,6-dione (PBDFTPD) polymers prepared by microwave-assisted synthesis can achieve power conversion efficiencies (PCEs) >7% in bulk-heterojunction solar cells with phenyl-C61/71-butyric acid methyl

  13. Electron-deficient N-alkyloyl derivatives of thieno[3,4-c]pyrrole-4,6-dione yield efficient polymer solar cells with open-circuit voltages > 1 v

    KAUST Repository

    Warnan, Julien; Cabanetos, Clement; Bude, Romain; El Labban, Abdulrahman; LI, LIANG; Beaujuge, Pierre

    2014-01-01

    Poly(benzo[1,2-b:4,5-b′]dithiophene-thieno[3,4-c]pyrrole-4,6-dione) (PBDTTPD) polymer donors yield some of the highest open-circuit voltages (V OC, ca. 0.9 V) and fill factors (FF, ca. 70%) in conventional bulk-heterojunction (BHJ) solar cells

  14. Linear side chains in benzo[1,2-b:4,5-b′]dithiophene-thieno[3,4-c] pyrrole-4,6-dione polymers direct self-assembly and solar cell performance

    KAUST Repository

    Cabanetos, Clement; El Labban, Abdulrahman; Bartelt, Jonathan A.; Douglas, Jessica D.; Mateker, William R.; Frechet, Jean; McGehee, Michael D.; Beaujuge, Pierre

    2013-01-01

    role that linear side-chain substituents play in poly(benzo[1,2-b:4,5-b′]dithiophene-thieno[3,4-c]pyrrole-4,6-dione) (PBDTTPD) polymers for bulk heterojunction (BHJ) solar cell applications. We show that replacing branched side chains by linear ones

  15. Blood pyrrole-protein adducts as a diagnostic and prognostic index in pyrrolizidine alkaloid-hepatic sinusoidal obstruction syndrome

    Directory of Open Access Journals (Sweden)

    Gao H

    2015-08-01

    Full Text Available Hong Gao,1,* Jianqing Q Ruan,2,* Jie Chen,1 Na Li,2 Changqiang Q Ke,3 Yang Ye,3–5 Ge Lin,2,4,5 Jiyao Y Wang1,61Department of Gastroenterology, Zhongshan Hospital, Fudan University, Shanghai, People’s Republic of China; 2School of Biomedical Sciences, Chinese University of Hong Kong, Hong Kong; 3Shanghai Institute of Materia Medica, Shanghai, People’s Republic of China; 4Joint Research Laboratory for Promoting Globalization of Traditional Chinese Medicines, Shanghai Institute of Materia Medica, 5Chinese University of Hong Kong, Hong Kong; 6Center of Evidence-Based Medicine Fudan University, Shanghai, People’s Republic of China*These authors contributed equally to this work and share first authorship Background: The diagnosis of hepatic sinusoidal obstruction syndrome (HSOS induced by pyrrolizidine alkaloids is mainly based on clinical investigation. There is currently no prognostic index. This study evaluated the quantitative measurement of blood pyrrole-protein adducts (PPAs as a diagnostic and prognostic index for pyrrolizidine alkaloid-induced HSOS.Methods: Suspected drug-induced liver injury patients were prospectively recruited. Blood PPAs were quantitatively measured using ultra-performance liquid chromatography-tandem mass spectrometry. Patients’ age, sex, biochemistry test results, and a detailed drug history were recorded. The patients were divided into two groups, ie, those with HSOS induced by pyrrolizidine alkaloid-containing drugs and those with liver injury induced by drugs without pyrrolizidine alkaloids. The relationship between herb administration, clinical outcomes, blood sampling time, and blood PPA concentration in pyrrolizidine alkaloid-associated HSOS patients was analyzed using multiple linear regression analysis.Results: Forty patients met the entry criteria, among whom 23 had pyrrolizidine alkaloid-associated HSOS and 17 had liver injury caused by drugs without pyrrolizidine alkaloids. Among the 23

  16. Cation Recognition: Novel Potentiometric PVC-Membrane Sensor based on Meso-octamethylcalix[4]pyrrole for the Determination of Trace Amounts of Titanium (III) Ions

    International Nuclear Information System (INIS)

    Saeid Ahmadzadeh; Anuar Kassim Majid Rezayi

    2011-01-01

    The present work deals with developing a novel high selective membrane electrode based on meso-octamethylcalix[4]pyrrole for accurate determination of trace amount of titanium (III) ions in real sample solutions. The amounts of ionophore (4 mg), PVC (33 mg), dioctyl phthalate (DOP) as plasticizer (62.8 mg) and sodium tetrakis [3,5-bis (trifluoromethyl) phenyl] borate (NaTFPB) as an ionic additive (0.2 mg) were optimized in the preparation of the membrane. The electrode exhibited a linear response with a near Nernstian slope of 29.49±0.16 (mV per decade of activity) over the pH range from 1 to 3 with a satisfactory concentration range of 1.0 x 10 -6 to 1.0 x x10 -2 M. The developed sensor exhibited good reproducibility over a period of about 3 months with a fast response time of 15 seconds. (author)

  17. Emission and absorption of light in poly pyrrole synthesized by plasma; Emision y absorcion de luz en polipirrol sintetizado por plasma

    Energy Technology Data Exchange (ETDEWEB)

    Enriquez, M.A.; Colin, E.; Olayo, M.G.; Cruz, G.J.; Ordonez, E. [ININ, A.P. 18-1027, 11801 Mexico D.F. (Mexico); Benavides, R. [Departamento de Procesos de Transformacion, CIQA, Blvd. Enrique Reyna 140, Saltillo, Coahuila (Mexico); Morales, J.; Olayo, R. [UAM-I, Apdo. Postal 55-534, Iztapalapa, D.F. (Mexico)]. e-mail: gcc@nuclear.inin.mx

    2007-07-01

    The poly pyrrole structure (PPy) consists of heterocyclic rings with conjugation that it depends on the intensity of the electric field applied during the synthesis, and its luminescence is related with the {pi}-{pi}{sup *} transitions of that conjugation. To irradiate with light of different wavelengths, the results indicate that the polymer absorbs in the interval from 290 to 700 nm and it emits between 450 and 470 nm. The basal conductivity of the polymers, without electromagnetic excitation, it was measured in 10{sup -15} S/cm, however, to interact with visible light it is increased approximately 10 times and when excite with UV light it is increased up to 3 magnitude orders. (Author)

  18. Ferrocene-functionalized 4-(2,5-Di(thiophen-2-yl)-1H-pyrrol-1-yl)aniline: a novel design in conducting polymer-based electrochemical biosensors.

    Science.gov (United States)

    Ayranci, Rukiye; Demirkol, Dilek Odaci; Ak, Metin; Timur, Suna

    2015-01-13

    Herein, we report a novel ferrocenyldithiophosphonate functional conducting polymer and its use as an immobilization matrix in amperometric biosensor applications. Initially, 4-(2,5-di(thiophen-2-yl)-1H-pyrrol-1-yl)amidoferrocenyldithiophosphonate was synthesized and copolymerized with 4-(2,5-di(thiophen-2-yl)-1H-pyrrol-1-yl)benzenamine at graphite electrodes. The amino groups on the polymer were utilized for covalent attachment of the enzyme glucose oxidase. Besides, ferrocene on the backbone was used as a redox mediator during the electrochemical measurements. Prior to the analytical characterization, optimization studies were carried out. The changes in current signals at +0.45 V were proportional to glucose concentration from 0.5 to 5.0 mM. Finally, the resulting biosensor was applied for glucose analysis in real samples and the data were compared with the spectrophotometric Trinder method.

  19. Biocatalytic ammonolysis of (5S)-4,5-dihydro-1H-pyrrole-1,5-dicarboxylic acid, 1-(1,1-dimethylethyl)-5-ethyl ester: preparation of an intermediate to the dipeptidyl peptidase IV inhibitor Saxagliptin.

    Science.gov (United States)

    Gill, Iqbal; Patel, Ramesh

    2006-02-01

    An efficient biocatalytic method has been developed for the conversion of (5S)-4,5-dihydro-1H-pyrrole-1,5-dicarboxylic acid, 1-(1,1-dimethylethyl)-5-ethyl ester (1) into the corresponding amide (5S)-5-aminocarbonyl-4,5-dihydro-1H-pyrrole-1-carboxylic acid, 1-(1,1-dimethylethyl)ester (2), which is a critical intermediate in the synthesis of the dipeptidyl peptidase IV (DPP4) inhibitor Saxagliptin (3). Candida antartica lipase B mediates ammonolysis of the ester with ammonium carbamate as ammonia donor to yield up to 71% of the amide. The inclusion of Ascarite and calcium chloride as adsorbents for carbon dioxide and ethanol byproducts, respectively, increases the yield to 98%, thereby offering an efficient and practical alternative to chemical routes which yield 57-64%.

  20. Rhodium(III)-catalyzed [3+2] annulation of 5-aryl-2,3-dihydro-1H-pyrroles with internal alkynes through C(sp²)-H/alkene functionalization.

    Science.gov (United States)

    Zhou, Ming-Bo; Pi, Rui; Hu, Ming; Yang, Yuan; Song, Ren-Jie; Xia, Yuanzhi; Li, Jin-Heng

    2014-10-13

    This study describes a new rhodium(III)-catalyzed [3+2] annulation of 5-aryl-2,3-dihydro-1H-pyrroles with internal alkynes using a Cu(OAc)2 oxidant for building a spirocyclic ring system, which includes the functionalization of an aryl C(sp(2))-H bond and addition/protonolysis of an alkene C=C bond. This method is applicable to a wide range of 5-aryl-2,3-dihydro-1H-pyrroles and internal alkynes, and results in the assembly of the spiro[indene-1,2'-pyrrolidine] architectures in good yields with excellent regioselectivities. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Vinyl ethers, containing isothiocyanate group. 12. Reaction of 2-vinyloxyethylisothiocyanate with metallated ethoxyethene, methoxyalline and 2-alkynes: 2,3-disubstituted N-(2-vinyloxyethyl) pyrroles and 6-(vinyloxymethyl)-5,6-dihydropyridines

    International Nuclear Information System (INIS)

    Nedolya, N.A.; Brandsma, L.; Zinov'eva, V.P.; Trofimov, B.A.

    1997-01-01

    New route of synthesis of 1,2,3-trisubstituted pyrroles and 2,3,6-trisubstituted 5,6-dyhydropyridines by the reaction of lithiated alkoxyallenes and 2-alkynes with 2-vinyloxyethylisothiocyanate is found. It is shown that key intermediates are 1,3,4-azatrienes. Reaction of metallized ethoxyethene with 2-vinyloxyethyisothiocyanate (after intermediate alkylation) results in 1-(2-vinyloxyethyl)-1,3-azadiene

  2. The effect of β-saturated pyrrolic rings on the electronic structures and aromaticity of magnesium porphyrin derivatives: a density functional study.

    Science.gov (United States)

    Wan, Liang; Qi, Dongdong; Zhang, Yuexing

    2011-09-01

    Density functional theory (DFT) calculation on the molecular structures, molecular orbitals, electronic absorption spectra, and magnetic properties of magnesium porphyrin (MgPor) and a series of five hydrogenated magnesium porphyrin complexes with different number of β-saturated pyrrolic rings, namely MgPor-β-1Hy, MgPor-β-opp-2Hy, MgPor-β-adj-2Hy, MgPor-β-3Hy, and MgPor-β-4Hy, clarifies the red-shift of the lowest energy absorption band from chlorophyll a to bacteriochlorophyll and reveals the strong chemical stability for both of them. The energy levels of highest occupied molecular orbitals (HOMO) and HOMO-1 for MgPor are reversed upon hydrogenation at β-positions (2 and 3, 7 and 8, 12 and 13, and 17 and 18) of porphyrin ring. Along with the increase of β-saturated pyrrolic rings from 1, 2, 3, to 4, the HOMO energy increases from -4.78 eV to -3.10 eV in a regular manner. In contrast, the lowest unoccupied molecular orbitals (LUMO) energy levels of MgPor, MgPor-β-1Hy, and MgPor-β-opp-2Hy are very similar with each other. As a result, the lowest energy absorption band involving main transition from HOMO to LUMO is red-shifted from MgPor-β-1Hy to MgPor-β-opp-2Hy which is representative of chlorophyll a and bacteriochlorophyll, respectively. Natural hydroporphyrins represented by MgPor, MgPor-β-1Hy, and MgPor-β-opp-2Hy have turned out to be aromatic and stable enough, in good accordance with the ubiquity of their derivatives in the nature. In contrast, MgPor-β-adj-2Hy, MgPor-β-3Hy, and MgPor-β-4Hy with relatively weak aromaticity seem to be unstable and therefore were not found in nature. Copyright © 2011 Elsevier Inc. All rights reserved.

  3. Pyrrole and 2,5-heptanedione in the urine of rats and 2,5-heptanedione in the urine of man: analytical determination of excretion upon exposure to n-heptane; Pyrrole und 2,5-Heptandion im Urin der Ratte und 2,5-Heptandion im Urin des Menschen: Analytische Bestimmung der Ausscheidung nach Exposition gegn n-Heptan

    Energy Technology Data Exchange (ETDEWEB)

    Stoermer, A.G.C.

    1997-09-01

    A method for quantifying levels of the neurotoxic metabolite 2,5-heptanedione in rats and man after experimental exposure to n-heptane was developed. It consisted in determining the quantity of 2,5-heptanedione excreted in urine and the relevant excretion kinetics. Moreover, the excretion of pyrrole in the urine of rats was measured. In the urine of non-exposed rats and man, a basic excretion of 2,5-heptanedione was measured, with the rates of excretion being 0.11 and 4.5 nmol per hour, respectively. This basic excretion of 2,5-heptanedione is assumed to have an endogenous cause. The quantitive investigation of the dose dependence of the excretion of 2,5-heptanedione and pyrrole in the urine of rats and of 2,5-heptanedione in the urine of man is a prerequisite for assessing the risk posed by n-heptane with a view to peripheral neuropathies. (orig./MG) [Deutsch] Ziel dieser Arbeit war die Entwicklung einer Methode zur Quantifizierung der Belastung von Ratte und Mensch mit dem neurotoxischen Metaboliten 2,5-Heptandion nach experimentellen Expositionen gegen n-Heptan. Dazu sollte jeweils die ausgeschiedene Menge und die zugehoerige Ausscheidungskinetik von 2,5-Heptandion im Urin bestimmt werden. Darueber hinaus sollte die Ausscheidung von Pyrrolen im Urin von Ratten gemessen werden. Im Urin von nicht exponierten Ratten und Menschen wurde eine Grundausscheidung von 2,5-Heptandion gefunden, wobei die Ausscheidungsraten jeweils 0,11 bzw. 4,5 nmol/h betrugen. Fuer die Grundausscheidung von 2,5-Heptandion wird ein endogener Ursprung angenommen. Die quantitativen Untersuchungen zur Dosisabhaengigkeit der Ausscheidung im Urin von 2,5-Heptandion und Pyrrolen bei der Ratte und von 2,5-Heptandion beim Menschen sind eine Grundvoraussetzung fuer eine Abschaetzung des Risikos von n-Heptan fuer periphere Neuropathien. (orig./MG)

  4. Photocatalytic Degradation of Eosin Yellow Using Poly(pyrrole-co-aniline-Coated TiO2/Nanocellulose Composite under Solar Light Irradiation

    Directory of Open Access Journals (Sweden)

    T. S. Anirudhan

    2015-01-01

    Full Text Available The present study describes the feasibility of a novel adsorbent cum photocatalyst, poly(pyrrole-co-aniline-coated TiO2/nanocellulose composite (P(Py-co-An-TiO2/NCC, to remove eosin yellow (EY from aqueous solutions. The removal of EY was investigated by batch adsorption followed by photocatalysis. The effect of various adsorption parameters like adsorbent dose, pH, contact time, initial concentration, and ionic strength has been optimized for treating effluents from the dye industry. Adsorption of EY reached maximum at pH 4.5 and complete removal of dye was achieved using 3.5 g/L of P(Py-co-An-TiO2/NCC. Adsorption equilibrium data were fitted with Langmuir and Fritz-Schlunder isotherm models and the kinetics of adsorption follows a second-order mechanism. The adsorption capacity of P(Py-co-An-TiO2/NCC was found to be 3.39 × 10−5 mol/g and reached equilibrium within 90 min. The photocatalytic degradation of adsorbed dye under sunlight was possible and about 92.3% of dye was degraded within 90 min. The reusability of P(Py-co-An-TiO2/NCC was also investigated. The results indicate that P(Py-co-An-TiO2/NCC is the best material for the wiping out of EY from aqueous solutions.

  5. Facile Syntheses and Molecular-Docking of Novel Substituted 3,4-Dimethyl-1H-pyrrole-2-carboxamide/carbohydrazide Analogues with Antimicrobial and Antifungal Properties

    Directory of Open Access Journals (Sweden)

    Jitendra D. Bhosale

    2018-04-01

    Full Text Available The article describes the use of facile one-pot, high-yielding reactions to synthesize substituted 3,4-dimethyl-1H-pyrrole-2-carboxamides 3a–m and carbohydrazide analogues 5a–l as potential antifungal and antimicrobial agents. The structural identity and purity of the synthesized compounds were assigned based on appropriate spectroscopic techniques. Synthesized compounds were assessed in vitro for antifungal and antibacterial activity. The compounds 5h, 5i and 5j were found to be the most potent against Aspergillus fumigatus, with MIC values of 0.039 mg/mL. The compound 5f bearing a 2, 6-dichloro group on the phenyl ring was found to be the most active broad spectrum antibacterial agent with a MIC value of 0.039 mg/mL. The mode of action of the most promising antifungal compounds (one representative from each series; 3j and 5h was established by their molecular docking with the active site of sterol 14α-demethylase. Molecular docking studies revealed a highly spontaneous binding ability of the tested compounds in the access channel away from catalytic heme iron of the enzyme, which suggested that the tested compounds inhibit this enzyme and would avoid heme iron-related deleterious side effects observed with many existing antifungal compounds.

  6. Development of a new analytical tool for assessing the mutagen 2-methyl-1,4-dinitro-pyrrole in meat products by LC-ESI-MS/MS.

    Science.gov (United States)

    Molognoni, Luciano; Daguer, Heitor; de Sá Ploêncio, Leandro Antunes; Yotsuyanagi, Suzana Eri; da Silva Correa Lemos, Ana Lucia; Joussef, Antonio Carlos; De Dea Lindner, Juliano

    2018-08-01

    The use of sorbate and nitrite in meat processing may lead to the formation of 2-methyl-1,4-dinitro-pyrrole (DNMP), a mutagenic compound. This work was aimed at developing and validating an analytical method for the quantitation of DNMP by liquid chromatography-tandem mass spectrometry. Full validation was performed in accordance to Commission Decision 2002/657/EC and method applicability was checked in several samples of meat products. A simple procedure, with low temperature partitioning solid-liquid extraction, was developed. The nitrosation during the extraction was monitored by the N-nitroso-DL-pipecolic acid content. Chromatographic separation was achieved in 8 min with di-isopropyl-3-aminopropyl silane bound to hydroxylated silica as stationary phase. Samples of bacon and cooked sausage yielded the highest concentrations of DNMP (68 ± 3 and 50 ± 3 μg kg -1 , respectively). The developed method proved to be a reliable, selective, and sensitive tool for DNMP measurements in meat products. Copyright © 2018 Elsevier B.V. All rights reserved.

  7. Electrochemical immunosensor for the determination of insulin-like growth factor-1 using electrodes modified with carbon nanotubes-poly(pyrrole propionic acid) hybrids.

    Science.gov (United States)

    Serafín, V; Agüí, L; Yáñez-Sedeño, P; Pingarrón, J M

    2014-02-15

    An amperometric immunosensor for the determination of the hormone insulin-like growth factor 1 (IGF1) is reported for the first time in this work. As electrochemical transducer, a multiwalled carbon nanotubes-modified glassy carbon electrode on which poly(pyrrole propionic acid) was electropolymerized was prepared. This approach provided a high content of surface confined carboxyl groups suitable for direct covalent binding of anti-IGF1 monoclonal antibody. A sandwich-type immunoassay using a polyclonal antibody labeled with peroxidase, hydrogen peroxide as the enzyme substrate and catechol as redox mediator was employed to monitor the affinity reaction. All the variables involved in the preparation of the modified electrode were optimized and the electrodes were characterized by electrochemical impedance spectroscopy and cyclic voltammetry. Moreover, the different experimental variables affecting the amperometric response of the immunosensor were also optimized. The calibration graph for IGF1 showed a range of linearity extending from 0.5 to 1000 pg/mL, with a detection limit, 0.25 pg/mL, more than 100 times lower than the lowest values reported for the ELISA immunoassays available for IGF1 (30 pg/mL, approximately). Excellent reproducibility for the measurements carried out with different immunosensors and selectivity against other hormones were also evidenced. A commercial human serum spiked with IGF1 at different levels between 0.01 and 10.0 ng/mL was analyzed with good results. © 2013 Elsevier B.V. All rights reserved.

  8. Electrochromic properties of poly (1-(phenyl)-2,5-di(2-thienyl)-1H-pyrrole-co-3,4-ethylenedioxy thiophene) and its application in electrochromic devices

    Science.gov (United States)

    Tarkuc, S.; Sahmetlioglu, E.; Tanyeli, C.; Akhmedov, I. M.; Toppare, L.

    2008-06-01

    Electrochemical copolymerization of 1-(phenyl)-2,5-di(2-thienyl)-1H-pyrrole (PTP) with 3,4-ethylenedioxy thiophene (EDOT) was carried out in acetonitrile (AN)/NaClO4/LiClO4 (0.1 M) solvent-electrolyte couple via potentiodynamic electrolysis. Characterizations of the resulting copolymer were performed via cyclic voltammetry (CV), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and spectroelectrochemical analysis. Spectroelectrochemical analyses show that the copolymer of PTP with EDOT has an electronic band gap (due to π to π∗ transition) of 1.9 eV at 480 nm, with a claret red in the fully reduced form and a blue color in the fully oxidized form. Via kinetic studies, the optical contrast (ΔT %) was found to be 8% for P(PTP-co-EDOT). Results showed that the time required to reach 95% of the ultimate transmittance was 1.7 s for the copolymer. The P(PTP-co-EDOT) film was used to construct a dual type polymer electrochromic device (ECDs) with poly(3,4-ethylenedioxy thiophene) (PEDOT). Spectroelectrochemistry, electrochromic switching and open circuit memory of the device were investigated.

  9. Performance limitations in thieno[3,4-c]pyrrole-4,6-dione-based polymer:ITIC solar cells

    KAUST Repository

    Yang, Fan

    2017-08-15

    We report a systematic study of the efficiency limitations of non-fullerene organic solar cells that exhibit a small energy loss (Eloss) between the polymer donor and the non-fullerene acceptor. To clarify the impact of Eloss on the performance of the solar cells, three thieno[3,4-c]pyrrole-4,6-dione-based conjugated polymers (PTPD3T, PTPD2T, and PTPDBDT) are employed as the electron donor, which all have complementary absorption spectra compared with the ITIC acceptor. The corresponding photovoltaic devices show that low Eloss (0.54 eV) in PTPDBDT:ITIC leads to a high open-circuit voltage (Voc) of 1.05 V, but also to a small quantum efficiency, and in turn photocurrent. The high Voc or small energy loss in the PTPDBDT-based solar cells is a consequence of less non-radiative recombination, whereas the low quantum efficiency is attributed to the unfavorable micro-phase separation, as confirmed by the steady-state and time-resolved photoluminescence experiments, grazing-incidence wide-angle X-ray scattering, and resonant soft X-ray scattering (R-SoXS) measurements. We conclude that to achieve high performance non-fullerene solar cells, it is essential to realize a large Voc with small Eloss while simultaneously maintaining a high quantum efficiency by manipulating the molecular interaction in the bulk-heterojunction.

  10. Small Molecules Derived from Thieno[3,4-c]pyrrole-4,6-dione (TPD) and Their Use in Solution Processed Organic Solar Cells.

    Science.gov (United States)

    Garcias-Morales, Cesar; Romero-Borja, Daniel; Maldonado, José-Luis; Roa, Arián E; Rodríguez, Mario; García-Merinos, J Pablo; Ariza-Castolo, Armando

    2017-09-30

    In this work, microwave synthesis, chemical, optical and electrochemical characterization of three small organic molecules, TPA-TPD , TPA-PT-TPD and TPA-TT-TPD with donor-acceptor structure and their use in organic photovoltaic cells are reported. For the synthesis, 5-(2-ethylhexyl)-4 H -thieno[3,4- c ]pyrrole-4,6(5 H )-dione was used as electron withdrawing fragment while the triphenylamine was used as electron donating fragment. Molecular electronic geometry and electronic distribution density were established by density functional theory (DFT) calculations and confirmed by optical and chemical characterization. These molecules were employed as electron-donors in the active layer for manufacturing bulk heterojunction organic solar cells, where [6,6]-phenyl C71 butyric acid methyl ester (PC71BM) was used as electron-acceptor. As cathode, Field's metal (FM), an eutectic alloy (Bi/In/Sn: 32.5%, 51%, and 16.5%, respectively) with a melting point above 62 °C, was easily deposited by drop casting under vacuum-free process and at air atmosphere. Prepared devices based on TPA-TPD :PC71BM (1:4 w / w ratio) presented a large V OC = 0.97 V, with J SC = 7.9 mA/cm², a FF = 0.34, then, a power conversion efficiency (PCE) of 2.6%.

  11. Non-Covalent Functionalisation of C30 Fullerene by Pyrrole-n-Carboxylic Acid (n=2, 3): Density Functional Theory Studies

    Science.gov (United States)

    Harismah, Kun; Mirzaei, Mahmoud; Ghasemi, Nahid; Nejati, Mohammad

    2017-12-01

    For functionalisation of a representative C30 fullerene nanostructure by pyrrole-n-carboxylic acid (PnCA; n=2, 3) their stabilities and properties were investigated based on density functional theory calculations. Parallel calculations were also done for C60 fullerene as evidence for comparing the results. Non-covalent interactions are considered to make the functionalised structures. In contrast with the spherical shape of C60, the shape of C30 fullerene is elliptical; therefore, the functionalisation processes were done for both axial and equatorial elliptical positions (AC30 and EC30). The results indicated that both the positions of C30 have almost equivalent chances to be functionalised by PnCA; but functionalisation by P2CA is slightly more favourable than P3CA, either for C60. The illustrated molecular orbitals' distributions indicated that the direction of charge transfer could be considered from PnCA counterparts to fullerene counterparts. The molecular properties indicated more reactivity for C30 than for C60 fullerene. Finally, the atomic scale quadrupole coupling constants indicated different roles for N and O atoms of PnCA in the functionalised models.

  12. Non-covalent functionalisation of C{sub 30} fullerene by pyrrole-n-carboxylic acid (n=2, 3). Density functional theory studies

    Energy Technology Data Exchange (ETDEWEB)

    Harismah, Kun [Univ. Muhammadiyah Surakarta (Indonesia). Dept. of Chemical Engineering; Mirzaei, Mahmoud [Isfahan Univ. of Medical Sciences (Iran, Islamic Republic of). Bioinformatics Research Center; Ghasemi, Nahid [Islamic Azad Univ., Arak (Iran, Islamic Republic of). Dept. of Chemistry; Nejati, Mohammad [Islamic Azad Univ., Tehran (Iran, Islamic Republic of). Dept. of Chemistry

    2018-04-01

    For functionalisation of a representative C{sub 30} fullerene nanostructure by pyrrole-n-carboxylic acid (PnCA; n=2, 3) their stabilities and properties were investigated based on density functional theory calculations. Parallel calculations were also done for C{sub 60} fullerene as evidence for comparing the results. Non-covalent interactions are considered to make the functionalised structures. In contrast with the spherical shape of C{sub 60}, the shape of C{sub 30} fullerene is elliptical; therefore, the functionalisation processes were done for both axial and equatorial elliptical positions (AC{sub 30} and EC{sub 30}). The results indicated that both the positions of C{sub 30} have almost equivalent chances to be functionalised by PnCA; but functionalisation by P2CA is slightly more favourable than P3CA, either for C{sub 60}. The illustrated molecular orbitals' distributions indicated that the direction of charge transfer could be considered from PnCA counterparts to fullerene counterparts. The molecular properties indicated more reactivity for C{sub 30} than for C{sub 60} fullerene. Finally, the atomic scale quadrupole coupling constants indicated different roles for N and O atoms of PnCA in the functionalised models.

  13. Selective Determination of Serotonin on Poly(3,4-ethylenedioxy pyrrole)-single-walled Carbon Nanotube-Modified Glassy Carbon Electrodes

    International Nuclear Information System (INIS)

    Kim, Seul Ki; Bae, Si Ra; Ahmed, Mohammad Shamsuddin; You, Jung Min; Jeon, Seung Won

    2011-01-01

    An electrochemically-modified electrode [P(EDOP-SWNTs)/GCE] was prepared by electropolymerization of 3,4-ethylenedioxy pyrrole (EDOP) single-walled carbon nanotubes (SWNTs) on the surface of a glassy carbon electrode (GCE) and characterized by SEM, CV, and DPV. This modified electrode was employed as an electrochemical biosensor for the selective determination of serotonin concentrations at pH 7.4 and exhibited a typical enhanced effect on the current response of serotonin with a lower oxidation overpotential. The linear response was in the range of 1.0 x 10"-"7 to 1.0 x 10"-"5 M, with a correlation coefficient of 0.998 on the anodic current. The lower detection limit was calculated as 5.0 nM. Due to the relatively low currents and difference of potentials in the electrochemical responses of uric acid (UA), ascorbic acid (AA), and dopamine (DA), the modified electrode was a useful and effective sensing device for the selective and sensitive serotonin determination in the presence of UA, AA, and DA

  14. Selective Determination of Serotonin on Poly(3,4-ethylenedioxy pyrrole)-single-walled Carbon Nanotube-Modified Glassy Carbon Electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Seul Ki; Bae, Si Ra; Ahmed, Mohammad Shamsuddin; You, Jung Min; Jeon, Seung Won [Chonnam National University, Gwangju (Korea, Republic of)

    2011-04-15

    An electrochemically-modified electrode [P(EDOP-SWNTs)/GCE] was prepared by electropolymerization of 3,4-ethylenedioxy pyrrole (EDOP) single-walled carbon nanotubes (SWNTs) on the surface of a glassy carbon electrode (GCE) and characterized by SEM, CV, and DPV. This modified electrode was employed as an electrochemical biosensor for the selective determination of serotonin concentrations at pH 7.4 and exhibited a typical enhanced effect on the current response of serotonin with a lower oxidation overpotential. The linear response was in the range of 1.0 x 10{sup -7} to 1.0 x 10{sup -5} M, with a correlation coefficient of 0.998 on the anodic current. The lower detection limit was calculated as 5.0 nM. Due to the relatively low currents and difference of potentials in the electrochemical responses of uric acid (UA), ascorbic acid (AA), and dopamine (DA), the modified electrode was a useful and effective sensing device for the selective and sensitive serotonin determination in the presence of UA, AA, and DA.

  15. Fe nanoparticle tailored poly(N-methyl pyrrole) nanowire matrix: a CHEMFET study from the perspective of discrimination among electron donating analytes

    International Nuclear Information System (INIS)

    Datta, K; Rushi, A; Shirsat, M; Mulchandani, A; Ghosh, P

    2015-01-01

    Back-gated chemically sensitive field effect transistor (CHEMFET) platforms have been developed with electrochemically synthesized poly(N-methyl pyrrole) nanowires by a templateless route. The nanowire matrix has been tailored with Fe nanoparticles to probe their effect in enhancing the sensing capabilities of the nanowire platform, and further to see if the inculcation of Fe nanoparticles is helpful to enhance the screening capability of the sensor among electron donating analytes. A noticeable difference in the sensing behaviour of the CHEMFET sensor was observed when it was exposed to three different analytes—ammonia, phosphine and carbon monoxide. FET transfer characteristics were instrumental in the corroboration of the experimental validations. The observations have been rationalized considering the simultaneous modulation of the work functions of Fe and polymeric material. The real time behaviour of the sensor shows that the sensor platform is readily capable of sensing the validated analytes at a ppb level of concentration with good response and recovery behaviour. The best response could be observed for ammonia with an Fe nanoparticle tailored polymeric matrix, with a sensitivity of ∼31.58% and excellent linearity (R 2 = 0.985) in a concentration window of 0.05 ppm to 1 ppm. (paper)

  16. Performance limitations in thieno[3,4-c]pyrrole-4,6-dione-based polymer:ITIC solar cells

    KAUST Repository

    Yang, Fan; Qian, Deping; Balawi, Ahmed Hesham; Wu, Yang; Ma, Wei; Laquai, Fré dé ric; Tang, Zheng; Zhang, Fengling; Li, Weiwei

    2017-01-01

    We report a systematic study of the efficiency limitations of non-fullerene organic solar cells that exhibit a small energy loss (Eloss) between the polymer donor and the non-fullerene acceptor. To clarify the impact of Eloss on the performance of the solar cells, three thieno[3,4-c]pyrrole-4,6-dione-based conjugated polymers (PTPD3T, PTPD2T, and PTPDBDT) are employed as the electron donor, which all have complementary absorption spectra compared with the ITIC acceptor. The corresponding photovoltaic devices show that low Eloss (0.54 eV) in PTPDBDT:ITIC leads to a high open-circuit voltage (Voc) of 1.05 V, but also to a small quantum efficiency, and in turn photocurrent. The high Voc or small energy loss in the PTPDBDT-based solar cells is a consequence of less non-radiative recombination, whereas the low quantum efficiency is attributed to the unfavorable micro-phase separation, as confirmed by the steady-state and time-resolved photoluminescence experiments, grazing-incidence wide-angle X-ray scattering, and resonant soft X-ray scattering (R-SoXS) measurements. We conclude that to achieve high performance non-fullerene solar cells, it is essential to realize a large Voc with small Eloss while simultaneously maintaining a high quantum efficiency by manipulating the molecular interaction in the bulk-heterojunction.

  17. Radiosynthesis and in vivo evaluation of [{sup 11}C]-labelled pyrrole-2-carboxamide derivates as novel radioligands for PET imaging of monoamine oxidase A

    Energy Technology Data Exchange (ETDEWEB)

    De Bruyne, Sylvie [Laboratory for Radiopharmacy, Ghent University, 9000 Ghent (Belgium); La Regina, Giuseppe [Istituto Pasteur, Fondazione Cenci Bolognetti, Dipartimento di Chimica e Tecnologie del Farmaco, Sapienza Universita di Roma, I-00185 Rome (Italy); Staelens, Steven [IBITECH-Medisip, Ghent University-IBBT, 9000 Ghent (Belgium); Wyffels, Leonie [Laboratory for Radiopharmacy, Ghent University, 9000 Ghent (Belgium); Deleye, Steven [IBITECH-Medisip, Ghent University-IBBT, 9000 Ghent (Belgium); Silvestri, Romano [Istituto Pasteur, Fondazione Cenci Bolognetti, Dipartimento di Chimica e Tecnologie del Farmaco, Sapienza Universita di Roma, I-00185 Rome (Italy); De Vos, Filip [Laboratory for Radiopharmacy, Ghent University, 9000 Ghent (Belgium)], E-mail: filipx.devos@ugent.be

    2010-05-15

    Introduction: Since MAO-A is an enzyme involved in the metabolism of neurotransmitters, fluctuations in MAO-A functionality are associated with psychiatric and neurological disorders as well as with tobacco addiction and behaviour. This study reports the radiolabelling of two [{sup 11}C]-labelled pyrrole-2-carboxamide derivates, RS 2315 and RS 2360, along with the characterization of their in vivo properties. Methods: The radiolabelling of [{sup 11}C]-RS 2315 and [{sup 11}C]-RS 2360 was accomplished by alkylation of their amide precursors with [{sup 11}C]CH{sub 3}I. Biodistribution, blocking and metabolite studies of both tracers were performed in NMRI mice. Finally, a PET study in Sprague-Dawley rats was performed for [{sup 11}C]-RS 2360. Results: Both tracers were obtained in a radiochemical yield of approximately 30% with radiochemical purity of >98%. Biodistribution studies showed high brain uptake followed by rapid brain clearance for both radiotracers. In the brain, [{sup 11}C]-RS 2360 was more stable than [{sup 11}C]-RS 2315. Blocking studies in mice could not demonstrate specificity of [{sup 11}C]-RS 2315 towards MAO-A or MAO-B. The blocking and imaging study with [{sup 11}C]-RS 2360 on the other hand indicated specific binding in MAO-A at the earliest time points. Conclusions: [{sup 11}C]-RS 2315 displayed a high nonspecific binding and is therefore not suitable for visualization of MAO-A in vivo. [{sup 11}C]-RS 2360 on the other hand has potential for mapping MAO-A since specific binding is demonstrated.

  18. Radiosynthesis and in vivo evaluation of [11C]-labelled pyrrole-2-carboxamide derivates as novel radioligands for PET imaging of monoamine oxidase A

    International Nuclear Information System (INIS)

    De Bruyne, Sylvie; La Regina, Giuseppe; Staelens, Steven; Wyffels, Leonie; Deleye, Steven; Silvestri, Romano; De Vos, Filip

    2010-01-01

    Introduction: Since MAO-A is an enzyme involved in the metabolism of neurotransmitters, fluctuations in MAO-A functionality are associated with psychiatric and neurological disorders as well as with tobacco addiction and behaviour. This study reports the radiolabelling of two [ 11 C]-labelled pyrrole-2-carboxamide derivates, RS 2315 and RS 2360, along with the characterization of their in vivo properties. Methods: The radiolabelling of [ 11 C]-RS 2315 and [ 11 C]-RS 2360 was accomplished by alkylation of their amide precursors with [ 11 C]CH 3 I. Biodistribution, blocking and metabolite studies of both tracers were performed in NMRI mice. Finally, a PET study in Sprague-Dawley rats was performed for [ 11 C]-RS 2360. Results: Both tracers were obtained in a radiochemical yield of approximately 30% with radiochemical purity of >98%. Biodistribution studies showed high brain uptake followed by rapid brain clearance for both radiotracers. In the brain, [ 11 C]-RS 2360 was more stable than [ 11 C]-RS 2315. Blocking studies in mice could not demonstrate specificity of [ 11 C]-RS 2315 towards MAO-A or MAO-B. The blocking and imaging study with [ 11 C]-RS 2360 on the other hand indicated specific binding in MAO-A at the earliest time points. Conclusions: [ 11 C]-RS 2315 displayed a high nonspecific binding and is therefore not suitable for visualization of MAO-A in vivo. [ 11 C]-RS 2360 on the other hand has potential for mapping MAO-A since specific binding is demonstrated.

  19. Thieno[3,4-c]Pyrrole-4,6-Dione-Based Polymer Acceptors for High Open-Circuit Voltage All-Polymer Solar Cells

    KAUST Repository

    Liu, Shengjian

    2017-04-20

    While polymer acceptors are promising fullerene alternatives in the fabrication of efficient bulk heterojunction (BHJ) solar cells, the range of efficient material systems relevant to the “all-polymer” BHJ concept remains narrow, and currently limits the perspectives to meet the 10% efficiency threshold in all-polymer solar cells. This report examines two polymer acceptor analogs composed of thieno[3,4-c]pyrrole-4,6-dione (TPD) and 3,4-difluorothiophene ([2F]T) motifs, and their BHJ solar cell performance pattern with a low-bandgap polymer donor commonly used with fullerenes (PBDT-TS1; taken as a model system). In this material set, the introduction of a third electron-deficient motif, namely 2,1,3-benzothiadiazole (BT), is shown to (i) significantly narrow the optical gap (Eopt) of the corresponding polymer (by ≈0.2 eV) and (ii) improve the electron mobility of the polymer by over two orders of magnitude in BHJ solar cells. In turn, the narrow-gap P2TPDBT[2F]T analog (Eopt = 1.7 eV) used as fullerene alternative yields high open-circuit voltages (VOC) of ≈1.0 V, notable short-circuit current values (JSC) of ≈11.0 mA cm−2, and power conversion efficiencies (PCEs) nearing 5% in all-polymer BHJ solar cells. P2TPDBT[2F]T paves the way to a new, promising class of polymer acceptor candidates.

  20. Morphological and physicochemical properties of dip-coated poly {(2,5-diyl pyrrole) [4-nitrobenzylidène]} (PPNB) thin films: towards photovoltaic applications

    Science.gov (United States)

    Mouchaal, Younes; Gherrass, Hamou; Bendoukha Reguig, Abdelkarim; Hachemaoui, Aïcha; Yahiaoui, Ahmed; Makha, Mohamed; Khelil, Abdelbacet; Bernede, Jean-Christian

    2015-02-01

    A new material: conjugated poly {(2,5-diyl pyrrole) [4-nitrobenzylidène]}, that we called (PPNB), has been synthesized and characterized. The cyclic voltammetry has been used in order to estimate first oxidation (Ep) and reduction (En) potentials of our polymer. These values have been assigned, respectively, to the position of the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) and determination of the energy band gap which have been estimated to be 6.16, 3.89 and 2.27 eV respectively. Energy levels values of the HOMO and LUMO of the PPNB polymeric donor material were evaluated and the results are compatible with an electron transfer to C60 within an eventual junction, such values show that PPNB could be probed for applications in organic solar cells as donor material. PPNB Thin films have been deposited by dip-coating technique from Dichloromethane solvent with different polymer concentrations, and a dipping speed of 3.0 cm/min. For morphological characterization of the films scanning electron microscopy (SEM) was carried out. The samples, when observed by SEM, reveals that the films deposited are less dense, uniform. Cross-sectional SEM micrographs PPNB films show that thickness of the layers is homogeneous and has value of 35-40 nm. Optical characteristics of the polymer thin films were studied using UV-vis spectroscopy; absorption of wide range of wavelengths from 350 to 700 nm was observed. The optical band gap energy ranges between 1.9 eV and 1.94 eV. Based on these analyzes we realized heterojunction organic solar cells with the structure: ITO/Au/PPNB/C60/BCP/Al, the cells had a photovoltaique effect after J-V measuring, however the efficiency of photo generation under AM1.5 illumination was weak (about 0.02%) and needs to be improved.

  1. Gold nanoparticle/nickel oxide/poly(pyrrole-N-propionic acid hybrid multilayer film: Electrochemical study and its application in biosensing

    Directory of Open Access Journals (Sweden)

    T. Karazehir

    2017-06-01

    Full Text Available The present study describes the fabrication of Indium Tin Oxide /gold nanoparticles/nickel oxide/poly(Pyrrole-N-propionic acid (ITO/GNPs/NiO/poly(PPA multilayered film, and its modification with Tyrosinase (Ty. The ITO/GNPs/NiO/poly(PPA electrode was fabricated by sequential electrochemical assembly onto ITO substrate which electrochemical deposition provides a facile, inexpensive technique for synthesis of multilayered film within the adherent morphology with controllable film thickness. Cyclic voltammetry (CV, Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR, scanning electron microcopy (SEM, and atomic force microcopy (AFM were used to characterize the film assembly processes. The properties of a semiconductor/electrolyte interface were investigated based on the Mott–Schottky (M-S approach for the modified electrodes, with the flat band potential (EFB according to the potential intercept and the carrier density (ND according to the linear slopes. The ND and EFB of ITO/GNPs/NiO/poly(PPA were obtained as 2.48·1021 cm–3 and 0.26 V, respectively. Tyrosinase was immobilized using carbodiimide coupling reaction. The bioelectrode was characterized by FTIR-ATR, SEM, AFM, electrochemical impedance spectroscopy (EIS. A Randles equivalent circuit was introduced for modeling the performance of impedimetric biosensing for the detection of the dopamine (DP and the interface of bioelectrode/electrolyte. The EIS of the ITO/GNPs/NiO/poly(PPA-Ty exhibited significant changes in the charge transfer resistance (RCT value toward the detection of dopamine over a linear range of 80 µM to 0.2 mM with a limit of detection (LOD of 5.46 µM.

  2. Marked Consequences of Systematic Oligothiophene Catenation in Thieno[3,4-c]pyrrole-4,6-dione and Bithiopheneimide Photovoltaic Copolymers

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Nanjia; Guo, Xugang; Ponce Ortiz, Rocio; Harschneck, Tobias; Manley, Eric F.; Lou, Sylvia J.; Hartnett, Patrick E.; Yu, Xinge; Horwitz, Noah E.; Mayorga Burrezo, Paula; Aldrich, Thomas J.; Lopez Navarrete, Juan T.; Wasielewski, Michael R.; Chen, Lin X.; Chang, Robert P. H.; Facchetti, Antonio; Marks, Tobin J.

    2015-10-07

    As effective building blocks for high-mobility transistor polymers, oligothiophenes are receiving attention for polymer solar cells (PSCs) because the resulting polymers can effectively suppress charge recombination. Here we investigate two series of in-chain donor-acceptor copolymers, PTPDnT and PBTInT, based on thieno[3,4-c]pyrrole-4,6-dione (TPD) or bithiopheneimide (BTI) as electron acceptor units, respectively, and oligothiophenes (nTs) as donor counits, for high-performance PSCs. Intramolecular S···O interaction leads to more planar TPD polymer backbones, however backbone torsion yields greater open-circuit voltages for BTI polymers. Thiophene addition progressively raises polymer HOMOs but marginally affects their band gaps. FT-Raman spectra indicate that PTPDnT and PBTInT conjugation lengths scale with nT catenation up to n = 3 and then saturate for longer oligomer. Furthermore, the effects of oligothiophene alkylation position are explored, revealing that the alkylation pattern greatly affects film morphology and PSC performance. The 3T with “outward” alkylation in PTPD3T and PBTI3T affords optimal π-conjugation, close stacking, long-range order, and high hole mobilities (0.1 cm2/(V s)). These characteristics contribute to the exceptional ~80% fill factors for PTPD3T-based PSCs with PCE = 7.7%. The results demonstrate that 3T is the optimal donor unit among nTs (n = 1-4) for photovoltaic polymers. Grazing incidence wide-angle X-ray scattering, transmission electron microscopy, and time-resolved microwave conductivity measurements reveal that the terthiophene-based PTPD3T blend maintains high crystallinity with appreciable local mobility and long charge carrier lifetime. These results provide fundamental materials structure-device performance correlations and suggest guidelines for designing oligothiophene-based polymers with optimal thiophene catenation and appropriate alkylation pattern to maximize PSC performance.

  3. Synthesis and Characterization of BaFe12O19/Poly(aniline, pyrrole, ethylene terephthalate) Composites Coatings as Radar Absorbing Material (RAM)

    Science.gov (United States)

    Sasria, Nia; Ardhyananta, H.; Fajarin, R.; Widyastuti

    2017-07-01

    This research shows the processing and design of radar absorbing material (RAM) based on barium hexaferrite (BaM) and poly(aniline, pyrrole, ethylene terephthalate) (PAni,PPy,PET). BaM was prepared by sol gel method with Ni-Zn doping at mole fraction of 0. 4 to obtain soft magnetic material. BaM/(PAni,PPy) composites were synthesized by in-situ polymerization method at ˜0 °C. (BaM/PET) composite was prepared by melt compounding at 220°C. The composites were coated on A-grade AH36 steel using Dallenbach Layer, Salisbury Screen and Jaumann Layer methods with thickness of 2, 4, and 6 mm. The composites were evaluated using XRD, SEM, FTIR, VSM, LCM-meter and VNA. Results showed that doped BaM showed BaNixZnxFe12-2xO19 structure. BaM/(PAni,PPy,PET) composites possessed globular morphology with M-O and C-H bonds. BaNixZnxFe12-2xO19 exhibited the value of Ms and Hc, 56.6 emu/g and 60 Oe respectively. High electrical conductivity of 1.77744 × 10-5 S/cm was achieved of BaM/PAni composite. The maximum reflection loss (RL) was reached at - 48.720 dB and 8.1 GHz for BaM/PAni composite coating with 6 mm thickness at Jaumann Layer. These results indicated that BaM/PAni composite was a soft magnetic material with a high RL value that is suitable for RAM, which used in stealth technology on naval vessels.

  4. Monocrotaline pyrrole-induced megalocytosis of lung and breast epithelial cells: Disruption of plasma membrane and Golgi dynamics and an enhanced unfolded protein response

    International Nuclear Information System (INIS)

    Mukhopadhyay, Somshuvra; Shah, Mehul; Patel, Kirit; Sehgal, Pravin B.

    2006-01-01

    The pyrrolizidine alkaloid monocrotaline (MCT) initiates pulmonary hypertension by inducing a 'megalocytosis' phenotype in target pulmonary arterial endothelial, smooth muscle and Type II alveolar epithelial cells. In cultured endothelial cells, a single exposure to the pyrrolic derivative of monocrotaline (MCTP) results in large cells with enlarged endoplasmic reticulum (ER) and Golgi and increased vacuoles. However, these cells fail to enter mitosis. Largely based upon data from endothelial cells, we proposed earlier that a disruption of the trafficking and mitosis-sensor functions of the Golgi (the 'Golgi blockade' hypothesis) may represent the subcellular mechanism leading to MCTP-induced megalocytosis. In the present study, we investigated the applicability of the Golgi blockade hypothesis to epithelial cells. MCTP induced marked megalocytosis in cultures of lung A549 and breast MCF-7 cells. This was associated with a change in the distribution of the cis-Golgi scaffolding protein GM130 from a discrete juxtanuclear localization to a circumnuclear distribution consistent with an anterograde block of GM130 trafficking to/through the Golgi. There was also a loss of plasma membrane caveolin-1 and E-cadherin, cortical actin together with a circumnuclear accumulation of clathrin heavy chain (CHC) and α-tubulin. Flotation analyses revealed losses/alterations in the association of caveolin-1, E-cadherin and CHC with raft microdomains. Moreover, megalocytosis was accompanied by an enhanced unfolded protein response (UPR) as evidenced by nuclear translocation of Ire1α and glucose regulated protein 58 (GRP58/ER-60/ERp57) and a circumnuclear accumulation of PERK kinase and protein disulfide isomerase (PDI). These data further support the hypothesis that an MCTP-induced Golgi blockade and enhanced UPR may represent the subcellular mechanism leading to enlargement of ER and Golgi and subsequent megalocytosis

  5. An approach towards azafuranomycin analogs by gold-catalyzed cycloisomerization of allenes: synthesis of (αS,2R-(2,5-dihydro-1H-pyrrol-2-ylglycine

    Directory of Open Access Journals (Sweden)

    Jörg Erdsack

    2013-09-01

    Full Text Available The synthesis of (αS,2R-(2,5-dihydro-1H-pyrrol-2-ylglycine (22, normethylazafuranomycin by the gold-catalyzed cycloisomerization of α-aminoallene 17 is described. The target molecule was synthesized in 13 linear steps from Cbz-protected Garner aldehyde (R-2 in an overall yield of 2.4%. The approach was first examined in model studies, which afforded the alkylated azafuranomycin derivative 13a in 2.9% yield over 12 steps.

  6. Property-based design and synthesis of new chloroquine hybrids via simple incorporation of 2-imino-thiazolidine-4-one or 1h-pyrrol-2, 5-dione fragments on the 4-amino-7-chloroquinoline side chain

    International Nuclear Information System (INIS)

    Rojas, Fernando A.; Kouznetsov, Vladimir V.

    2011-01-01

    In the present work, the syntheses of new 4-amino-7-chloroquinoline N-derivatives were performed by selective modification of the side chain amino group of N-(7-chloroquinoline-4-yl) alkyldiamines, basis framework of chloroquine (CQ) drug through the incorporation of heterocyclic 2-imino-thiazolidine-4-one and 1 H-pyrrol-2,5-dione systems. These potential activity modulators were selected thanks to their characteristic properties, and evaluated by virtual screening employing the OSIRIS and Molinspirations platforms. Designed and synthesized quinolinic derivatives could increase the antimalarial activity of CQ analogues without affecting the lipophilicity as described in literature, suggesting them as candidates for further biological assessments. (author)

  7. Property-based design and synthesis of new chloroquine hybrids via simple incorporation of 2-imino-thiazolidine-4-one or 1h-pyrrol-2, 5-dione fragments on the 4-amino-7-chloroquinoline side chain

    Energy Technology Data Exchange (ETDEWEB)

    Rojas, Fernando A; Kouznetsov, Vladimir V., E-mail: kouznet@uis.edu.co [Laboratorio de Quimica Organica y Biomolecular, Escuela de Quimica, Universidad Industrial de Santander, Bucaramanga (Colombia)

    2011-09-15

    In the present work, the syntheses of new 4-amino-7-chloroquinoline N-derivatives were performed by selective modification of the side chain amino group of N-(7-chloroquinoline-4-yl) alkyldiamines, basis framework of chloroquine (CQ) drug through the incorporation of heterocyclic 2-imino-thiazolidine-4-one and {sup 1}H-pyrrol-2,5-dione systems. These potential activity modulators were selected thanks to their characteristic properties, and evaluated by virtual screening employing the OSIRIS and Molinspirations platforms. Designed and synthesized quinolinic derivatives could increase the antimalarial activity of CQ analogues without affecting the lipophilicity as described in literature, suggesting them as candidates for further biological assessments. (author)

  8. Ordering effects in benzo[1,2-b:4,5-b']difuran-thieno[3,4-c]pyrrole-4,6- dione polymers with >7% solar cell efficiency

    KAUST Repository

    Warnan, Julien

    2014-05-15

    Benzo[1,2-b:4,5-b\\']difuran-thieno[3,4-c]pyrrole-4,6-dione (PBDFTPD) polymers prepared by microwave-assisted synthesis can achieve power conversion efficiencies (PCEs) >7% in bulk-heterojunction solar cells with phenyl-C61/71-butyric acid methyl ester (PCBM). In "as-cast" PBDFTPD-based devices solution-processed without a small-molecule additive, high PCEs can be obtained in spite of the weak propensity of the polymers to self-assemble and form π-aggregates in thin films. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Complete dechlorination of 2,4-dichlorophenol in aqueous solution on palladium/polymeric pyrrole-cetyl trimethyl ammonium bromide/foam-nickel composite electrode

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Zhirong, E-mail: zrsun@bjut.edu.cn [College of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100124 (China); Wei, Xuefeng; Han, Yanbo; Tong, Shan [College of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100124 (China); Hu, Xiang, E-mail: huxiang99@163.com [College of Chemical Engineering, Beijing University of Chemical Technology, Beijing 100029 (China)

    2013-01-15

    Highlights: ► Pd/PPy-CTAB/foam-Ni electrode with high surface area and low Pd content was prepared. ► The composite electrode was applied to dechlorination of 2,4-DCP in aqueous solution. ► Complete dechlorination of 2,4-DCP was achieved with higher current efficiency. ► Removal efficiency kept 100% after 10 times dechlorination on the stable electrode. ► The electrochemically reductive activation energy was 25.8 kJ mol{sup −1} in this system. -- Abstract: The electrochemically reductive dechlorination of 2,4-dichlorophenol (2,4-DCP) in aqueous solution on palladium/polymeric pyrrole-cetyl trimethyl ammonium bromide/foam-nickel electrode (Pd/PPy-CTAB/foam-Ni electrode) was investigated in this paper. Pd/PPy-CTAB/foam-Ni electrode was prepared and characterized by cyclic voltammetry (CV), scanning electron microscope (SEM), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) adsorption and inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The influences of some experimental factors such as the dechlorination current, dechlorination time and the initial pH on the removal efficiency and the current efficiency of 2,4-DCP dechlorination on Pd/PPy-CTAB/foam-Ni electrode were studied. Complete removal of 2,4-DCP was achieved and the current efficiency of 47.4% could be obtained under the conditions of the initial pH of 2.2, the dechlorination current of 5 mA and the dechlorination time of 50 min when the initial 2,4-DCP concentration was 100 mg L{sup −1}. The analysis of high performance liquid chromatography (HPLC) identified that the intermediate products were 2-chlorophenol (2-CP) and 4-chlorophenol (4-CP). The final products were mainly phenol. Its further reduction product cyclohexanone was also detected. The electrocatalytic dechlorination pathways of 2,4-DCP on Pd/PPy-CTAB/foam-Ni electrode were discussed. The stability of the electrode was favorable that it could keep dechlorination efficiency at 100% after having been reused

  10. Synthesis and phototoxicity of isomeric 7,9-diglutathione pyrrole adducts: Formation of reactive oxygen species and induction of lipid peroxidation

    Directory of Open Access Journals (Sweden)

    Liang Ma

    2015-09-01

    Full Text Available Pyrrolizidine alkaloids (PAs are hepatotoxic, genotoxic, and carcinogenic in experimental animals. Because of their widespread distribution in the world, PA-containing plants are probably the most common poisonous plants affecting livestock, wildlife, and humans. Upon metabolism, PAs generate reactive dehydro-PAs and other pyrrolic metabolites that lead to toxicity. Dehydro-PAs are known to react with glutathione (GSH to form 7-GSH-(+/−-6,7-dihydro-7-hydroxy-1-hydroxymethyl-5H-pyrrolizine (7-GS-DHP in vivo and in vitro and 7,9-diGS-DHP in vitro. To date, the phototoxicity of GS-DHP adducts has not been well studied. In this study, we synthesized 7-GS-DHP, a tentatively assigned 9-GS-DHP, and two enantiomeric 7,9-diGS-DHP adducts by reaction of dehydromonocrotaline with GSH. The two 7,9-diGS-DHPs were separated by high performance liquid chromatography (HPLC and their structures were characterized by 1H nuclear magnetic resonance (NMR and 1H–1H correlation spectroscopy (COSY NMR spectral analysis. Photoirradiation of 7-GS-DHP, 9-GS-DHP, and the two 7,9-diGS-DHPs as well as dehydromonocrotaline, dehydroheliotrine, and the 7-R enantiomer of DHP (DHR, by UVA light at 0 J/cm2, 14 J/cm2, and 35 J/cm2 in the presence of a lipid, methyl linoleate, all resulted in lipid peroxidation in a light dose-responsive manner. The levels of lipid peroxidation induced by the two isomeric 7,9-diGS-DHPs were significantly higher than that by 7-GS-DHP and 9-GS-DHP. When 7,9-diGS-DHP was irradiated in the presence of sodium azide (NaN3, the level of lipid peroxidation decreased; lipid peroxidation was enhanced when methanol was replaced by deuterated methanol. These results suggest that singlet oxygen is a product induced by the irradiation of 7,9-diGS-DHP. When irradiated in the presence of superoxide dismutase (SOD, the level of lipid peroxidation decreased, indicating that lipid peroxidation is also mediated by superoxide. These results indicate that lipid

  11. The activity of the pyrrole insecticide chlorfenapyr in mosquito bioassay: towards a more rational testing and screening of non-neurotoxic insecticides for malaria vector control.

    Science.gov (United States)

    Oxborough, Richard M; N'Guessan, Raphael; Jones, Rebecca; Kitau, Jovin; Ngufor, Corine; Malone, David; Mosha, Franklin W; Rowland, Mark W

    2015-03-24

    The rapid selection of pyrethroid resistance throughout sub-Saharan Africa is a serious threat to malaria vector control. Chlorfenapyr is a pyrrole insecticide which shows no cross resistance to insecticide classes normally used for vector control and is effective on mosquito nets under experimental hut conditions. Unlike neurotoxic insecticides, chlorfenapyr owes its toxicity to disruption of metabolic pathways in mitochondria that enable cellular respiration. A series of experiments explored whether standard World Health Organization (WHO) guidelines for evaluation of long-lasting insecticidal nets, developed through testing of pyrethroid insecticides, are suitable for evaluation of non-neurotoxic insecticides. The efficacy of WHO recommended cone, cylinder and tunnel tests was compared for pyrethroids and chlorfenapyr. To establish bioassay exposure times predictive of insecticide-treated net (ITN) efficacy in experimental hut trials, standard three-minute bioassays of pyrethroid and chlorfenapyr ITNs were compared with longer exposures. Mosquito behaviour and response to chlorfenapyr ITN in bioassays conducted at night were compared to day and across a range of temperatures representative of highland and lowland transmission. Standard three-minute bioassay of chlorfenapyr produced extremely low levels of mortality compared to pyrethroids. Thirty-minute day-time bioassay produced mortality closer to hut efficacy of chlorfenapyr ITN but still fell short of the WHO threshold. Overnight tunnel test with chlorfenapyr produced 100% mortality and exceeded the WHO threshold of 80%. The endogenous circadian activity rhythm of anophelines results in inactivity by day and raised metabolism and flight activity by night. A model which explains improved toxicity of chlorfenapyr ITN when tested at night, and during the day at higher ambient temperature, is that activation of chlorfenapyr and disruption of respiratory pathways is enhanced when the insect is more metabolically

  12. (3′R-3′-Benzyl-2′,3′-dihydro-1H-spiro[indole-3,1′-naphtho[2,3-c]pyrrole]-2,4′,9′-trione

    Directory of Open Access Journals (Sweden)

    Garima Sharma

    2012-09-01

    Full Text Available In the title compound, C26H18N2O3, the maximum deviations from planarity for the tetrahydro-1H-naphtho[2,3-c]pyrrole and indoline rings systems are 0.091 (1 and 0.012 (2 Å, respectively. These ring systems make a dihedral angle of 89.95 (6° with each other and they make dihedral angles of 73.42 (8 and 71.28 (9°, respectively, with the benzene ring. In the crystal, inversion dimers linked by pairs of N—H...O hydrogen bonds generate R22(8 loops and C—H...O interactions connect the dimers into corrugated sheets lying parallel to the bc plane.

  13. Observation of the Strong Electronic Coupling in Near-Infrared-Absorbing Tetraferrocene aza-Dipyrromethene and aza-BODIPY with Direct Ferrocene-α- and Ferrocene-β-Pyrrole Bonds: Toward Molecular Machinery with Four-Bit Information Storage Capacity.

    Science.gov (United States)

    Zatsikha, Yuriy V; Holstrom, Cole D; Chanawanno, Kullapa; Osinski, Allen J; Ziegler, Christopher J; Nemykin, Victor N

    2017-01-17

    The 1,3,7,9-tetraferrocenylazadipyrromethene (3) and the corresponding 1,3,5,7-tetraferrocene aza-BODIPY (4) were prepared via three and four synthetic steps, respectively, starting from ferrocenecarbaldehyde using the chalcone-type synthetic methodology. The novel tetra-iron compounds have ferrocene groups directly attached to both the α- and the β-pyrrolic positions, and the shortest Fe-Fe distance determined by X-ray crystallography for 3 was found to be ∼6.98 Å. These new compounds were characterized by UV-vis, nuclear magnetic resonance, and high-resolution electrospray ionization mass spectrometry methods, while metal-metal couplings in these systems were probed by electro- and spectroelectrochemistry, chemical oxidations, and Mössbauer spectroscopy. Electrochemical data are suggestive of the well-separated stepwise oxidations of all four ferrocene groups in 3 and 4, while spectroelectrochemical and chemical oxidation experiments allowed for characterization of the mixed-valence forms in the target compounds. Intervalence charge-transfer band analyses indicate that the mixed-valence [3] + and [4] + complexes belong to the weakly coupled class II systems in the Robin-Day classification. This interpretation was further supported by Mössbauer spectroscopy in which two individual doublets for Fe(II) and Fe(III) centers were observed in room-temperature experiments for the mixed-valence [3] n+ and [4] n+ species (n = 1-3). The electronic structure, redox properties, and UV-vis spectra of new systems were correlated with Density Functional Theory (DFT) and time-dependent DFT calculations (TDDFT), which are suggestive of a ferrocene-centered highest occupied molecular orbital and chromophore-centered lowest unoccupied molecular orbital in 3 and 4 as well as predominant spin localization at the ferrocene fragment attached to the α-pyrrolic positions in [3] + and [4] + .

  14. Promoter scanning of the human COX-2 gene with 8-ring polyamides: unexpected weakening of polyamide-DNA binding and selectivity by replacing an internal N-Me-pyrrole with β-alanine.

    Science.gov (United States)

    Bashkin, James K; Aston, Karl; Ramos, Joseph P; Koeller, Kevin J; Nanjunda, Rupesh; He, Gaofei; Dupureur, Cynthia M; David Wilson, W

    2013-02-01

    Rules for polyamide-DNA recognition have proved invaluable for the design of sequence-selective DNA binding agents in cell-free systems. However, these rules are not fully transferrable to predicting activity in cells, tissues or animals, and additional refinements to our understanding of DNA recognition would help biomedical studies. Similar complexities are encountered when using internal β-alanines as polyamide building blocks in place of N-methylpyrrole; β-alanines were introduced in polyamide designs to maintain good hydrogen bonding registry with the target DNA, especially for long polyamides or those with several GC bp (P.B. Dervan, A.R. Urbach, Essays Contemp. Chem. (2001) 327-339). Thus, to clarify important subtleties of molecular recognition, we studied the effects of replacing a single pyrrole with β-alanine in 8-ring polyamides designed against the Ets-1 transcription factor. Replacement of a single internal N-methylpyrrole with β-alanine to generate a β/Im pairing in two 8-ring polyamides causes a decrease in DNA binding affinity by two orders of magnitude and decreases DNA binding selectivity, contrary to expectations based on the literature. Measurements were made by fluorescence spectroscopy, quantitative DNA footprinting and surface plasmon resonance, with these vastly different techniques showing excellent agreement. Furthermore, results were validated for a range of DNA substrates from small hairpins to long dsDNA sequences. Docking studies helped show that β-alanine does not make efficient hydrophobic contacts with the rest of the polyamide or nearby DNA, in contrast to pyrrole. These results help refine design principles and expectations for polyamide-DNA recognition. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

  15. Preparation of thin {alpha}-particle sources using poly-pyrrole films functionalized by a chelating agent; Preparation de sources minces d'emetteurs alpha a l'aide de films de polypyrrole fonctionnalises par un ligand chelatant

    Energy Technology Data Exchange (ETDEWEB)

    Mariet, C. [CEA Saclay, INSTN, Institut National des Sciences et Techniques Nucleaires, 91 - Gif-sur-Yvette (France); Universite Pierre et Marie Curie, 75 - Paris (France)

    2000-07-01

    This work takes place in the scope of analysis of the {alpha}-particle emitting elements U, Pu and Am present in compound environmental matrix like sols and sediments. The samples diversity and above all the {alpha}-ray characteristics require the analyst to implement a sequence of chemical steps in which the more restricting is the actinides concentration in a uniform and thin layer en allowing an accurately measure of alpha activity. On this account, we studied a new technique for radioactive sources preparation based on tow steps: preparation of a thin film as source support; incorporation of radioactive elements by a chelating extraction mechanism. The thin films were obtained through electro-polymerization of pyrrole monomer functionalized by an chelating ligand able to extract actinides from concentrated acidic solutions. Polymerization conditions of this monomer were perfected, then obtained films were characterized from a physico-chemical point of view. We point out their extracting properties were comparable to (retention capacity, distribution coefficient) to those of usual ion-exchange resins. The underscore of uranyl and americium nitrate complexes formed in the thin layer allowed to calculate the extraction constants in case acid extraction is negligible. Thanks to this results, the values of the coefficients distribution D{sub U} and D{sub Am} could be provided for all nitric solutions in which acid extraction is negligible. Optimal actinides retention conditions in the polymer were defined and used to settle a protocol for plutonium analysis in environmental samples. (author)

  16. Electron-deficient N-alkyloyl derivatives of thieno[3,4-c]pyrrole-4,6-dione yield efficient polymer solar cells with open-circuit voltages > 1 v

    KAUST Repository

    Warnan, Julien

    2014-05-13

    Poly(benzo[1,2-b:4,5-b′]dithiophene-thieno[3,4-c]pyrrole-4,6-dione) (PBDTTPD) polymer donors yield some of the highest open-circuit voltages (V OC, ca. 0.9 V) and fill factors (FF, ca. 70%) in conventional bulk-heterojunction (BHJ) solar cells with PCBM acceptors. Recent work has shown that the incorporation of ring substituents into the side chains of the BDT motifs in PBDTTPD can induce subtle variations in material properties, resulting in an increase of the BHJ device VOC to ∼1 V. In this contribution, we report on the synthesis of N-alkyloyl-substituted TPD motifs (TPD(CO)) and show that the electron-deficient motifs can further lower both the polymer LUMO and HOMO levels, yielding device VOC > 1 V (up to ca. 1.1 V) in BHJ solar cells with PCBM. Despite the high VOC achieved (i.e., low polymer HOMO), BHJ devices cast from TPD(CO)-based polymer donors can reach power conversion efficiencies (PCEs) of up to 6.7%, making these promising systems for use in the high-band-gap cell of tandem solar cells. © 2014 American Chemical Society.

  17. Linear side chains in benzo[1,2-b:4,5-b′]dithiophene-thieno[3,4-c] pyrrole-4,6-dione polymers direct self-assembly and solar cell performance

    KAUST Repository

    Cabanetos, Clement

    2013-03-27

    While varying the size and branching of solubilizing side chains in π-conjugated polymers impacts their self-assembling properties in thin-film devices, these structural changes remain difficult to anticipate. This report emphasizes the determining role that linear side-chain substituents play in poly(benzo[1,2-b:4,5-b′]dithiophene-thieno[3,4-c]pyrrole-4,6-dione) (PBDTTPD) polymers for bulk heterojunction (BHJ) solar cell applications. We show that replacing branched side chains by linear ones in the BDT motifs induces a critical change in polymer self-assembly and backbone orientation in thin films that correlates with a dramatic drop in solar cell efficiency. In contrast, we show that for polymers with branched alkyl-substituted BDT motifs, controlling the number of aliphatic carbons in the linear N-alkyl-substituted TPD motifs is a major contributor to improved material performance. With this approach, PBDTTPD polymers were found to reach power conversion efficiencies of 8.5% and open-circuit voltages of 0.97 V in BHJ devices with PC71BM, making PBDTTPD one of the best polymer donors for use in the high-band-gap cell of tandem solar cells. © 2013 American Chemical Society.

  18. Synthesis, vapor growth, polymerization, and characterization of thin films of novel diacetylene derivatives of pyrrole. The use of computer modeling to predict chemical and optical properties of these diacetylenes and poly(diacetylenes)

    Science.gov (United States)

    Paley, M. S.; Frazier, D. O.; Abeledeyem, H.; Mcmanus, S. P.; Zutaut, S. E.

    1992-01-01

    In the present work two diacetylene derivatives of pyrrole which are predicted by semiempirical AM1 calculations to have very different properties, are synthesized; the polymerizability of these diacetylenes in the solid state is determined, and the results are compared to the computer predictions. Diacetylene 1 is novel in that the monomer is a liquid at room temperature; this may allow for the possibility of polymerization in the liquid state as well as the solid state. Thin poly(diacetylene) films are obtained from compound 1 by growing films of the monomer using vapor deposition and polymerizing with UV light; these films are then characterized. Interestingly, while the poly(diacetylene) from 1 does not possess good nonlinear optical properties, the monomer exhibits very good third-order effects (phase conjugation) in solution. Dilute acetone solutions of the monomer 1 give intensity-dependent refractive indices on the order of 10 exp -6 esu; these are 10 exp 6 times better than for CS2.

  19. Crystal structure of the catalytic domain of PigE: a transaminase involved in the biosynthesis of 2-methyl-3-n-amyl-pyrrole (MAP) from Serratia sp. FS14.

    Science.gov (United States)

    Lou, Xiangdi; Ran, Tingting; Han, Ning; Gao, Yanyan; He, Jianhua; Tang, Lin; Xu, Dongqing; Wang, Weiwu

    2014-04-25

    Prodigiosin, a tripyrrole red pigment synthesized by Serratia and some other microbes through a bifurcated biosynthesis pathway, MBC (4-methoxy-2,2'-bipyrrole-5-carbaldehyde) and MAP (2-methyl-3-n-amyl-pyrrole) are synthesized separately and then condensed by PigC to form prodigiosin. MAP is synthesized sequentially by PigD, PigE and PigB. PigE catalyzes the transamination of an amino group to the aldehyde group of 3-acetyloctanal, resulting in an aminoketone, which spontaneously cyclizes to form H2MAP. Here we report the crystal structure of the catalytic domain of PigE which involved in the biosynthesis of prodigiosin precursor MAP for the first time to a resolution of 2.3Å with a homodimer in the asymmetric unit. The monomer of PigE catalytic domain is composed of three domains with PLP as cofactor: a small N-terminal domain connecting the catalytic domain with the front part of PigE, a large PLP-binding domain and a C-terminal domain. The residues from both monomers build the PLP binding site at the interface of the dimer which resembles the other PLP-dependent enzymes. Structural comparison of PigE with Thermus thermophilus AcOAT showed a higher hydrophobic and smaller active site of PigE, these differences may be the reason for substrate specificity. Copyright © 2014 Elsevier Inc. All rights reserved.

  20. Catalytic mechanisms of direct pyrrole synthesis via dehydrogenative coupling mediated by PNP-Ir or PNN-Ru pincer complexes: Crucial role of proton-transfer shuttles in the PNP-Ir system

    KAUST Repository

    Qu, Shuanglin

    2014-04-02

    Kempe et al. and Milstein et al. have recently advanced the dehydrogenative coupling methodology to synthesize pyrroles from secondary alcohols (e.g., 3) and β-amino alcohols (e.g., 4), using PNP-Ir (1) and PNN-Ru (2) pincer complexes, respectively. We herein present a DFT study to characterize the catalytic mechanism of these reactions. After precatalyst activation to give active 1A/2A, the transformation proceeds via four stages: 1A/2A-catalyzed alcohol (3) dehydrogenation to give ketone (11), base-facilitated C-N coupling of 11 and 4 to form an imine-alcohol intermediate (18), base-promoted cyclization of 18, and catalyst regeneration via H2 release from 1R/2R. For alcohol dehydrogenations, the bifunctional double hydrogen-transfer pathway is more favorable than that via β-hydride elimination. Generally, proton-transfer (H-transfer) shuttles facilitate various H-transfer processes in both systems. Notwithstanding, H-transfer shuttles play a much more crucial role in the PNP-Ir system than in the PNN-Ru system. Without H-transfer shuttles, the key barriers up to 45.9 kcal/mol in PNP-Ir system are too high to be accessible, while the corresponding barriers (<32.0 kcal/mol) in PNN-Ru system are not unreachable. Another significant difference between the two systems is that the addition of alcohol to 1A giving an alkoxo complex is endergonic by 8.1 kcal/mol, whereas the addition to 2A is exergonic by 8.9 kcal/mol. The thermodynamic difference could be the main reason for PNP-Ir system requiring lower catalyst loading than the PNN-Ru system. We discuss how the differences are resulted in terms of electronic and geometric structures of the catalysts and how to use the features in catalyst development. © 2014 American Chemical Society.

  1. Photodissociation dynamics in the first absorption band of pyrrole. I. Molecular Hamiltonian and the Herzberg-Teller absorption spectrum for the A12(π σ* ) ←X˜ 1 A1(π π ) transition

    Science.gov (United States)

    Picconi, David; Grebenshchikov, Sergy Yu.

    2018-03-01

    This paper opens a series in which the photochemistry of the two lowest πσ* states of pyrrole and their interaction with each other and with the ground electronic state X ˜ are studied using ab initio quantum mechanics. New 24-dimensional potential energy surfaces for the photodissociation of the N-H bond and the formation of the pyrrolyl radical are calculated using the multiconfigurational perturbation theory (CASPT2) for the electronic states X ˜ (π π ) , 11A2(πσ*), and 11B1(πσ*) and locally diabatized. In this paper, the ab initio calculations are described and the photodissociation in the state 11A2(πσ*) is analyzed. The excitation 11 A2←X ˜ is mediated by the coordinate dependent transition dipole moment functions constructed using the Herzberg-Teller expansion. Nuclear dynamics, including 6, 11, and 15 active degrees of freedom, are studied using the multi-configurational time-dependent Hartree method. The focus is on the frequency resolved absorption spectrum as well as on the dissociation time scales and the resonance lifetimes. Calculations are compared with available experimental data. An approximate convolution method is developed and validated, with which absorption spectra can be calculated and assigned in terms of vibrational quantum numbers. The method represents the total absorption spectrum as a convolution of the diffuse spectrum of the detaching H-atom and the Franck-Condon spectrum of the heteroaromatic ring. Convolution calculation requires a minimal quantum chemical input and is a promising tool for studying the πσ* photodissociation in model biochromophores.

  2. The formation of [M-H]+ ions in N-alkyl-substituted thieno[3,4-c]-pyrrole-4,6-dione derivatives during atmospheric pressure photoionization mass spectrometry

    KAUST Repository

    Sioud, Salim

    2014-10-09

    RESULTS [M-H]+ ions were observed under APPI conditions. The type of dopant and the length of the alkyl chain affected the formation of these ions. MS/MS fragmentation of [M-H]+ and [M + H]+ ions exhibited completely different patterns. Theoretical calculations revealed that the loss of hydrogen molecules from the [M + H]+ ions is the most favourable condition under which to form [M-H]+ ions.CONCLUSIONS [M-H]+ ions were detected in all the TPD derivatives studied here under the special experimental conditions during APPI, using a halogenated benzene dopant, and TPD containing substituted N-alkyl side chains with a minimum of four carbon atoms. Density functional theory calculations showed that for [M-H]+ ions to be formed under these conditions, the loss of hydrogen molecules from the [M + H]+ ions is proposed to be necessary.RATIONALE The formation of ions during atmospheric pressure photoionization (APPI) mass spectrometry in the positive mode usually provides radical cations and/or protonated species. Intriguingly, during the analysis of some N-alkyl-substituted thieno[3,4-c]pyrrole-4,6-dione (TPD) derivatives synthesized in our laboratory, unusual [M-H]+ ion peaks were observed. In this work we investigate the formation of [M-H]+ ions observed under APPI conditions.METHODS Multiple experimental parameters, including the type of ionization source, the composition of the solvent, the type of dopant, the infusion flow rate, and the length of the alkyl side chain were investigated to determine their effects on the formation of [M-H]+ ions. In addition, a comparison study of the gas-phase tandem mass spectrometric (MS/MS) fragmentation of [M + H]+ vs [M-H]+ ions and computational approaches were used.

  3. Sensitive and selective electrochemical determination of quinoxaline-2-carboxylic acid based on bilayer of novel poly(pyrrole) functional composite using one-step electro-polymerization and molecularly imprinted poly(o-phenylenediamine)

    International Nuclear Information System (INIS)

    Yang, Yukun; Fang, Guozhen; Wang, Xiaomin; Pan, Mingfei; Qian, Hailong; Liu, Huilin; Wang, Shuo

    2014-01-01

    Graphical abstract: -- Highlights: •PPY-GO-BiCoPc composite was formed using a simple electrochemical method for the first time. •A novel PoPD-MIP sensor based on PPY-GO-BiCoPc composite had been fabricated. •The PPY-GO-BiCoPc functional composite was introduced to improve performance of the sensor. •Highly sensitive, selective and stable sensor had been achieved. •The established MIP sensor could be promising in food safety analysis. -- Abstract: A facile and efficient molecularly imprinted polymer (MIP) recognition element of electrochemical sensor was fabricated by directly electro-polymerizing monomer o-phenylenediamine (oPD) in the presence of template quinoxaline-2-carboxylic acid (QCA), based on one-step controllable electrochemical modification of poly(pyrrole)-graphene oxide-binuclear phthalocyanine cobalt (II) sulphonate (PPY-GO-BiCoPc) functional composite on glassy carbon electrode (GCE). The MIP film coated on PPY-GO-BiCoPc functional composite decorated GCE (MIP/PPY-GO-BiCoPc/GCE) was presented for the first time. The synergistic effect and electro-catalytic activity toward QCA redox of PPY-GO-BiCoPc functional composite were discussed using various contrast tests. Also, the effect of experimental variables on the current response such as, electro-polymerization cycles, template/monomer ratio, elution condition for template removal, pH of the supporting electrolyte and accumulation time, were investigated in detail. Under the optimized conditions, the proposed MIP sensor possessed a fast rebinding dynamics and an excellent recognition capacity to QCA, while the anodic current response of square wave voltammetry (SWV) was well-proportional to the concentration of QCA in the range of 1.0 × 10 −8 –1.0 × 10 −4 and 1.0 × 10 −4 –5.0 × 10 −4 mol L −1 with a low detection limit of 2.1 nmol L −1 . The established sensor was applied successfully to determine QCA in commercial pork and chicken muscle samples with acceptable

  4. Electronic, Spectral, and Electrochemical Properties of (TPPBr(x)())Zn Where TPPBr(x)() Is the Dianion of beta-Brominated-Pyrrole Tetraphenylporphyrin and x Varies from 0 to 8.

    Science.gov (United States)

    D'Souza, Francis; Zandler, Melvin E.; Tagliatesta, Pietro; Ou, Zhongping; Shao, Jianguo; Van Caemelbecke, Eric; Kadish, Karl M.

    1998-09-07

    The electronic, spectral, and electrochemical characterization of (meso-tetraphenylporphyrinato)zinc(II) complexes bearing between 0 and 8 bromo substituents at the beta-pyrrole positions is reported. The investigated compounds are represented as (TPPBr(x)())Zn where TPPBr(x)() is the dianion of brominated 5,10,15,20-tetraphenylporphyrin and x varies between 0 and 8. Each porphyrin undergoes four well-defined one-electron transfer reactions to yield porphyrin pi-cation radicals and dications upon oxidation and porphyrin pi-anion radicals and dianions upon reduction. Half-wave potentials for the first reduction of (TPPBr(x)())Zn can be described by a single linear free energy relationship, and plots of E(1/2) versus the number of Br groups on the complex show a linear correlation with a positive slope of 63 mV per Br group. This is not the case for the other three electron transfer processes of the compounds where plots of E(1/2) versus the number of Br groups show distinctly different linear correlations for derivatives with 0-4 Br groups and those with 4-8 Br groups. The effect of increasing number of Br groups on the spectral and electrochemical properties of the neutral complexes was examined over the whole series of compounds, and these experimental results are compared to results of theoretical calculations by semiempirical molecular orbital AM1 methods using configurational interactions (CI) over the four Gouterman frontier pi-orbitals. The dihedral angle containing the four porphyrin macrocycle ring nitrogens is proposed as a measure of porphyrin ring nonplanarity, and this value increases with increasing number of Br substituents on (TPPBr(x)())Zn. Results of the AM1-CI = 4 calculations indicate that the spectrally determined HOMO-LUMO gap, i.e., the energy corresponding to the low-energy absorption band, varies in a nonlinear fashion with increasing number of Br substituents on the macrocycle and this is due to both the electronic effect of the

  5. Sensitive and selective electrochemical determination of quinoxaline-2-carboxylic acid based on bilayer of novel poly(pyrrole) functional composite using one-step electro-polymerization and molecularly imprinted poly(o-phenylenediamine)

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Yukun; Fang, Guozhen; Wang, Xiaomin; Pan, Mingfei; Qian, Hailong; Liu, Huilin; Wang, Shuo, E-mail: s.wang@tust.edu.cn

    2014-01-02

    Graphical abstract: -- Highlights: •PPY-GO-BiCoPc composite was formed using a simple electrochemical method for the first time. •A novel PoPD-MIP sensor based on PPY-GO-BiCoPc composite had been fabricated. •The PPY-GO-BiCoPc functional composite was introduced to improve performance of the sensor. •Highly sensitive, selective and stable sensor had been achieved. •The established MIP sensor could be promising in food safety analysis. -- Abstract: A facile and efficient molecularly imprinted polymer (MIP) recognition element of electrochemical sensor was fabricated by directly electro-polymerizing monomer o-phenylenediamine (oPD) in the presence of template quinoxaline-2-carboxylic acid (QCA), based on one-step controllable electrochemical modification of poly(pyrrole)-graphene oxide-binuclear phthalocyanine cobalt (II) sulphonate (PPY-GO-BiCoPc) functional composite on glassy carbon electrode (GCE). The MIP film coated on PPY-GO-BiCoPc functional composite decorated GCE (MIP/PPY-GO-BiCoPc/GCE) was presented for the first time. The synergistic effect and electro-catalytic activity toward QCA redox of PPY-GO-BiCoPc functional composite were discussed using various contrast tests. Also, the effect of experimental variables on the current response such as, electro-polymerization cycles, template/monomer ratio, elution condition for template removal, pH of the supporting electrolyte and accumulation time, were investigated in detail. Under the optimized conditions, the proposed MIP sensor possessed a fast rebinding dynamics and an excellent recognition capacity to QCA, while the anodic current response of square wave voltammetry (SWV) was well-proportional to the concentration of QCA in the range of 1.0 × 10{sup −8}–1.0 × 10{sup −4} and 1.0 × 10{sup −4}–5.0 × 10{sup −4} mol L{sup −1} with a low detection limit of 2.1 nmol L{sup −1}. The established sensor was applied successfully to determine QCA in commercial pork and chicken muscle

  6. Palladium complexes of pyrrole-2-aldehyde thiosemicarbazone ...

    Indian Academy of Sciences (India)

    Chem. Rev. 253 1384; (j) Lobana T S, Sharma. R, Bawa G and Khanna S 2009 Coord. Chem. Rev. 253. 977; (k) Quiroga A G and Ranninger C N 2004 Coord. Chem. Rev. 248 119; (l) Dilworth J R, Arnold P, Morales. D, Wong Y L and Zheng Y 2002 Modern Coord. Chem. 217; (m) West D X, Liberta A E, Padhye S B, Chikate.

  7. Microwave assisted highly efficient one-pot multi-component synthesis of novel 2-(tetrasubstituted-1H-pyrrol-3-yl-4H-chroman-4-ones catalyzed by heterogeneous reusable silica gel supported polyphosphoric acid (PPA/SiO2

    Directory of Open Access Journals (Sweden)

    Sumit Kumar

    2018-02-01

    Full Text Available A solvent-free, eco-friendly and facile approach for the synthesis of highly functionalized tetrasubstituted pyrroles has been reported through one-pot four-component reaction of aldehyde, amine, nitroalkane and 1,3-diketone using silica gel supported polyphosphoric acid (PPA–SiO2 under microwave condition. The reaction occured through the in situ formation of β-keto enamine and nitrostyrene analog following Michael addition and finally intramolecular annulation affording the products in good yields. The key features of the present method include clean reaction, mild conditions, low catalyst loading, straightforward, high to excellent yields, short reaction time, avoiding use of harmful metal catalyst and organic solvent, environmentally friendly compared to the existing methods, recovery and reusability of catalyst and easy workup procedure.

  8. Metabolism and disposition of a novel antineoplastic JS-38 (Benzamide, N-[4-(2,4-dimethoxyphenyl)-4,5-dihydro-5-oxo-1,2-dithiolo[4,3-b]pyrrol-6-yl]-3,5-bis (trifluoromethyl)-(9Cl)) in rats.

    Science.gov (United States)

    Zhang, Hong; Liu, Quanhai; Fan, Tingting; Fang, Yu; Li, Ying; Wang, Guoping

    2012-03-01

    The metabolism and catabolism of a novel antineoplastic (ID code JS-38),Benzamide, N-[4-(2,4-dimethoxyphenyl)-4,5-dihydro-5-oxo-1,2-dithiolo[4,3-b]pyrrol-6-yl]-3,5-bis (trifluoromethyl)-(9Cl), were investigated in Wistar rats (3 female, 3 male). LC/UV, LC/MS, LC/MS/MS, NMR and acid hydrolysis methods showed that the metabolic process of JS-38 consists of a series of acetylation and glucoronation that form a metabolic product with a unique pharmacologic property of accelerating bone-marrow cell formation, and also showed a novel metabolic pathway of being acetylated and glucuronated in series.

  9. EFSA CEF Panel (EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids), 2014. Scientific Opinion on Flavouring Group Evaluation 77, Revision 1 (FGE.77Rev1): Consideration of Pyridine, Pyrrole and Quinoline Derivatives evaluated by JECFA (63rd meeting)

    DEFF Research Database (Denmark)

    Beltoft, Vibe Meister; Binderup, Mona-Lise; Frandsen, Henrik Lauritz

    for isoquinoline [FL-no: 14.001], pyrrole [FL-no: 14.041] and 2-acetylpyrrole [FL-no: 14.047]. The toxicity data on 2-acetylpyrrole should also cover 2-propionylpyrrole [FL-no: 14.068]. Further, additional genotoxicity data on 6-methylquinoline [FL-no: 14.042] have become available. The Panel concluded that for 6......-methylquinoline [FL-no: 14.042], the new genotoxicity data did not clear the concern with respect to genotoxicity in vitro and accordingly the substance is not evaluated through the Procedure. For 18 substances [FL-no: 14.001, 14.004, 14.007, 14.030, 14.038, 14.039, 14.041, 14.047, 14.058, 14.059, 14.060, 14...

  10. In-vitro investigations of the speed of pyrrole formation of 2,5-hexanedione and 2,5-heptanedione with N{alpha}-acetyl-L-lysine as a precondition for a comparative assessment of the neurotoxic potentials of the two {gamma}-diketones; In-vitro-Untersuchungen zur Pyrrolbildungsgeschwindigkeit von 2,5-Hexandion und 2,5-Heptandion mit N{alpha}-Acetyl-L-lysin als Voraussetzung fuer eine vergleichende Abschaetzung der neurotoxischen Potentiale beider {gamma}-Diketone

    Energy Technology Data Exchange (ETDEWEB)

    Richter, M.F.

    1997-09-01

    N-hexane and n-heptane are important solvents. Chronic exposure to n-hexane causes polyneuropathies, which are attributed to the metabolite 2,5-hexanedione, a {gamma} diketone. As a basis for a comparative assessment of the neurotoxic potentials of 2,5-hexanedione and 2,5-heptanedione, an in-vitro test was developed and used to investigate the speed of pyrrole formation of the two {gamma} diketones in reacting with the {epsilon} amino group of N{alpha}-acetyl L-lysine. The speed of the formation of pyrrole was always directly proportional to the respective reactant concentration. It consequently is subject to a second-order kinetics. As a further result, the pyrrole formation speed of 2,5-heptanedione was found to be only half that of 2,5-hexanedione. The results lead to the conclusion that 2,5-heptanedione poses a smaller risk of developing peripheral neuropathy than 2,5-hexanedione. (orig./MG) [Deutsch] n-Hexan und n-Heptan sind wichtige Loesungsmittel. Chronische Exposition gegenueber n-Hexan ruft Polyneuropathien hervor, die auf den Metaboliten 2,5-Hexandion, ein {gamma}-Diketon, zurueckgefuehrt werden. Als Grundlage fuer eine vergleichende Abschaetzung der neurotoxischen Potentiale von 2,5-Hexandion und 2,5-Heptandion wurde in der vorliegenden Arbeit ein In-vitro-Test entwickelt, mit dem die Pyrrolbildungsgeschwindigkeiten der beiden {gamma}-Diketone mit der {epsilon}-Aminogruppe von N{alpha}-Acetyl-L-Iysin untersucht wurden. Die Pyrrolbildungsgeschwindigkeit war stets direkt proportional zur jeweiligen Reaktantenkonzentration. Somit unterliegt sie einer Kinetik 2. Ordnung. Weiterhin wurde gezeigt, dass die Pyrrolbildungsgeschwindigkeit fuer 2,5-Heptandion nur etwa halb so gross ist wie fuer 2,5-Hexandion. Aus den Ergebnissen wird gefolgert, dass das von 2,5-Heptandion ausgehende Risiko an peripheren Neuropathien zu erkranken geringer ist, als das von 2,5-Hexandion ausgehende. (orig./MG)

  11. 7-Glutathione-pyrrole and 7-cysteine-pyrrole are potential carcinogenic metabolites of pyrrolizidine alkaloids.

    Science.gov (United States)

    He, Xiaobo; Xia, Qingsu; Fu, Peter P

    2017-04-03

    Many pyrrolizidine alkaloids (PAs) are hepatotoxic, genotoxic, and carcinogenic phytochemicals. Metabolism of PAs in vivo generates four (±)-6,7-dihydro-7-hydroxy-1-hydroxymethyl-5H-pyrrolizine (DHP)-DNA adducts that have been proposed to be responsible for PA-induced liver tumor formation in rats. In this present study, we determined that the same set of DHP-DNA adducts was formed upon the incubation of 7-glutathione-DHP and 7-cysteine-DHP with cultured human hepatocarcinoma HepG2 cells. These results suggest that 7-glutathione-DHP and 7-cysteine-DHP are reactive metabolites of PAs that can bind to cellular DNA to form DHP-DNA adducts in HepG2 cells, and can potentially initiate liver tumor formation.

  12. Fluorescent materials for pH sensing and imaging based on novel 1,4-diketopyrrolo-[3,4-c]pyrrole dyes†Electronic supplementary information (ESI) available: NMR and MS spectra, further sensor characteristics and sensor long-time performance. See DOI: 10.1039/c3tc31130aClick here for additional data file.

    Science.gov (United States)

    Aigner, Daniel; Ungerböck, Birgit; Mayr, Torsten; Saf, Robert; Klimant, Ingo; Borisov, Sergey M

    2013-09-28

    New optical pH-sensors relying on 1,4-diketopyrrolo-[3,4- c ]pyrroles (DPPs) as fluorescent pH-indicators are presented. Different polymer hydrogels are useful as immobilization matrices, achieving excellent sensitivity and good brightness in the resulting sensor. The operational pH can be tuned over a wide range (pH 5-12) by selecting the fine structure of the indicator and the matrix. A ratiometric sensor in the form of nanoparticles is also presented. It is suitable for RGB camera readout, and its practical applicability for fluorescence imaging in microfluidic systems is demonstrated. The indicators are synthesized starting from the commercially available DPP pigments by a straightforward concept employing chlorosulfonation and subsequent reaction with amines. Their sensitivity derives from two distinct mechanisms. At high pH (>9), they exhibit a remarkable alteration of both absorption and fluorescence spectra due to deprotonation of the lactam nitrogen atoms. If a phenolic group is introduced, highly effective fluorescence quenching at near-neutral pH occurs due to photoinduced electron transfer (PET) involving the phenolate form.

  13. 聚吡咯-酰基吡唑啉酮复合膜修饰玻碳电极测定酚磺乙胺的研究%Electrochemical Behavior and Determination of Ethamsylate on Poly-pyrrole/HPMαFP Complex Film Coated Glassy Carbon Electrode

    Institute of Scientific and Technical Information of China (English)

    韩慧; 李锦州; 孙仁霞

    2012-01-01

    报道了一种新型聚吡咯-酰基吡唑啉酮复合膜修饰玻碳电极(Ppy/HPMαFP/GCE)对酚磺乙胺(ETH)电化学性质及其反应机理的研究.酚磺乙胺的电化学性质检测运用循环伏安法和脉冲伏安法.实验表明,与裸GCE和Ppy/GCE相比,Ppy/HPM α FP/GCE修饰电极对酚磺乙胺有良好的催化作用.聚吡咯与酰基吡唑啉酮产生了协同增效作用.在pH=5.5的磷酸盐(PBS)缓冲溶液中,该修饰电极测试ETH的CV曲线于0.35V和0.4V出现一对灵敏的氧化还原峰,峰电位差△Ep较裸玻碳电极降低510mV,比Ppy修饰电极降低100mV,峰电流显著增加.在最佳条件下,氧化峰电流与ETH浓度于2.0×10-6~1.0×10-4mol·L-1范围内呈现良好的线性关系,检出限为6.0×10-7mol·L-1.%In this paper, a novel voltammetric method using poly-pyrrole and acyl-pyrazolone composite film modified glassy carton electrode (Ppy /HPMaFP /CCE) was developed for studying the electrochemical behavior and reaction mechanism of ethamsylate. The electrochemical parameters of ethamsylate were investigated by cyclic voltammetry and differential pulse voltammetry. Compared to the bare GCE and Ppy /GCE, the Ppy/HP-MaFP /CCE showed an excellent electro-catalytical effect on the oxidation of ethamsylate with significant increase in the peak current. The above results indicated that a synergistic effect was existed between poly-pyrrole and HPMaFP. According to the experiment, In PBS buffer solution with a pH of 5.5, a pair of sensitive redox peaks with Epa=0.40V, Epc=0.35V(vs.SCE) was obtained on the PPyHPMaFP modified electrode. The difference of peak potentials(△ Ep) was 510mV which was lower than on bare glassy carbon electrode, and about 100mV lower than on Ppy modified electrode. Meanwhile, the peak current markedly increased. Under the optimum conditions, linear calibration curve was obtained in the concentration range of2.0×10-6 ~1.0×10-4 mol·L-1. The detection limit was 6.0×10-7 mol·L-1.

  14. Column solid phase extraction and flame atomic absorption spectrometric determination of manganese(II) and iron(III) ions in water, food and biological samples using 3-(1-methyl-1H-pyrrol-2-yl)-1H-pyrazole-5-carboxylic acid on synthesized graphene oxide

    International Nuclear Information System (INIS)

    Pourjavid, Mohammad Reza; Sehat, Ali Akbari; Arabieh, Masoud; Yousefi, Seyed Reza; Hosseini, Majid Haji; Rezaee, Mohammad

    2014-01-01

    A modified, selective, highly sensitive and accurate procedure for the determination of trace amounts of manganese and iron ions is established in the presented work. 3-(1-Methyl-1H-pyrrol-2-yl)-1H-pyrazole-5-carboxylic acid (MPPC) and graphene oxide (GO) were used in a glass column as chelating reagent and as adsorbent respectively prior to their determination by flame atomic absorption spectrometry. The adsorption mechanism of titled metals complexes on GO was investigated by using computational chemistry approach based on PM6 semi-empirical potential energy surface (PES). The effect of some parameters including pH, flow rate and volume of sample and type, volume and concentration of eluent, as well as the adsorption capacity of matrix ions on the recovery of Mn(II) and Fe(III) was investigated. The limit of detection was 145 and 162 ng L −1 for Mn(II) and Fe(III), respectively. Calibration was linear over the range of 0.31–355 μg L −1 for Mn(II) and 0.34–380 μg L −1 for Fe(III) ions. The method was successfully applied for the determination of understudied ions in water, food and biological samples. - Highlights: • We use synthesized graphene oxide as adsorbent for SPE of Mn(II) and Fe(III) ions. • Adsorption mechanism was investigated by PM6 semi-empirical potential energy surface. • Detection limits were 145 and 162 ng L −1 for Mn and Fe, respectively. • The preconcentration factor was 325 and sample flow rate is 8 mL min −1 . • It was successfully applied to the determination of Mn and Fe ions in real samples

  15. Column solid phase extraction and flame atomic absorption spectrometric determination of manganese(II) and iron(III) ions in water, food and biological samples using 3-(1-methyl-1H-pyrrol-2-yl)-1H-pyrazole-5-carboxylic acid on synthesized graphene oxide

    Energy Technology Data Exchange (ETDEWEB)

    Pourjavid, Mohammad Reza, E-mail: pourjavid@gmail.com [NFCRS, Nuclear Science and Technology Research Institute, P.O. Box 11365-8486, Tehran (Iran, Islamic Republic of); Sehat, Ali Akbari [Department of Analytical Chemistry, Faculty of Chemistry, University College of Science, University of Tehran, P.O. Box 14155-6455, Tehran (Iran, Islamic Republic of); Arabieh, Masoud; Yousefi, Seyed Reza; Hosseini, Majid Haji; Rezaee, Mohammad [NFCRS, Nuclear Science and Technology Research Institute, P.O. Box 11365-8486, Tehran (Iran, Islamic Republic of)

    2014-02-01

    A modified, selective, highly sensitive and accurate procedure for the determination of trace amounts of manganese and iron ions is established in the presented work. 3-(1-Methyl-1H-pyrrol-2-yl)-1H-pyrazole-5-carboxylic acid (MPPC) and graphene oxide (GO) were used in a glass column as chelating reagent and as adsorbent respectively prior to their determination by flame atomic absorption spectrometry. The adsorption mechanism of titled metals complexes on GO was investigated by using computational chemistry approach based on PM6 semi-empirical potential energy surface (PES). The effect of some parameters including pH, flow rate and volume of sample and type, volume and concentration of eluent, as well as the adsorption capacity of matrix ions on the recovery of Mn(II) and Fe(III) was investigated. The limit of detection was 145 and 162 ng L{sup −1} for Mn(II) and Fe(III), respectively. Calibration was linear over the range of 0.31–355 μg L{sup −1} for Mn(II) and 0.34–380 μg L{sup −1} for Fe(III) ions. The method was successfully applied for the determination of understudied ions in water, food and biological samples. - Highlights: • We use synthesized graphene oxide as adsorbent for SPE of Mn(II) and Fe(III) ions. • Adsorption mechanism was investigated by PM6 semi-empirical potential energy surface. • Detection limits were 145 and 162 ng L{sup −1} for Mn and Fe, respectively. • The preconcentration factor was 325 and sample flow rate is 8 mL min{sup −1}. • It was successfully applied to the determination of Mn and Fe ions in real samples.

  16. Enzymatic Reductive Dehalogenation Controls the Biosynthesis of Marine Bacterial Pyrroles.

    Science.gov (United States)

    El Gamal, Abrahim; Agarwal, Vinayak; Rahman, Imran; Moore, Bradley S

    2016-10-12

    Enzymes capable of performing dehalogenating reactions have attracted tremendous contemporary attention due to their potential application in the bioremediation of anthropogenic polyhalogenated persistent organic pollutants. Nature, in particular the marine environment, is also a prolific source of polyhalogenated organic natural products. The study of the biosynthesis of these natural products has furnished a diverse array of halogenation biocatalysts, but thus far no examples of dehalogenating enzymes have been reported from a secondary metabolic pathway. Here we show that the penultimate step in the biosynthesis of the highly brominated marine bacterial product pentabromopseudilin is catalyzed by an unusual debrominase Bmp8 that utilizes a redox thiol mechanism to remove the C-2 bromine atom of 2,3,4,5-tetrabromopyrrole to facilitate oxidative coupling to 2,4-dibromophenol. To the best of our knowledge, Bmp8 is first example of a dehalogenating enzyme from the established genetic and biochemical context of a natural product biosynthetic pathway.

  17. Use of pyrrole black in zinc-halogen batteries

    Energy Technology Data Exchange (ETDEWEB)

    Mengoli, G.; Musiani, M.M.; Tomat, R.; Valcher, S.; Pletcher, D.

    1985-09-01

    The storage of Br/sub 2//Br/sup -/ and I/sub 2//I/sup -/ couples in a conducting polymer matrix, polypyrrole coated on a reticulated vitreous carbon disc, is described and the application of these positive electrodes in zinc-halogen model batteries is discussed. The cell based on the polypyrrole bromine adduct shows the higher open circuit voltage which, however, depends on the state of charge. Such cells self discharge thus limiting their usefulness. In the case of the iodine cell the self discharge is due to loss of iodine from the polymer to the bulk solution, but with the bromine cell the cause is oxidative bromination and depolymerization of the polypyrrole. 22 references, 6 figures, 2 tables.

  18. Physicochemical and morphological properties of poly(aniline-co-pyrrole)

    CSIR Research Space (South Africa)

    Mavundla, SE

    2010-01-01

    Full Text Available ) showed disordered structures of spherical agglomerates. The copolymers showed improved UV–Vis absorption with the broad peak from 450 to 850 nm. The copolymers exhibited a lower conductivity compared to the homopolymers due to the unsuccessful complex...

  19. Novel deep cavity calix[4]pyrroles derived from steroidal ketones

    Czech Academy of Sciences Publication Activity Database

    Dukh, Mykhaylo; Drašar, Pavel; Černý, Ivan; Pouzar, Vladimír; Shriver, J. A.; Král, V.; Sessler, J. L.

    2002-01-01

    Roč. 14, 2-3 (2002), s. 237-244 ISSN 1061-0278 R&D Projects: GA MŠk OC D12.20 Grant - others:NIH(US) GM58907 Institutional research plan: CEZ:AV0Z4055905 Keywords : ketones * steroid Subject RIV: CC - Organic Chemistry Impact factor: 1.820, year: 2002

  20. 5-(4-Methylphenylsulfonyl-1,3-dithiolo[4,5-c]pyrrole-2-thione

    Directory of Open Access Journals (Sweden)

    Ning-Juan Zheng

    2012-04-01

    Full Text Available The asymmetric unit of the title compound, C12H9NO2S4, contains one half-molecule with the N, two S amd four C atoms lying on a mirror plane. The molecule exhibits a V-shaped conformation, with a dihedral angle of 87.00 (7° between the benzene and dithiolopyrrole rings. The methyl group was treated as rotationally disordered between two orientations in a 1:1 ratio. In the crystal, weak C—H...O hydrogen bonds link the molecules into chains in [010].

  1. Some actinide complexes of pyridin-, pyrrol-, furan- and thiophen-aldazine Schiff bases

    International Nuclear Information System (INIS)

    Dawod, M.M.; Khalili, F.I.; Seyam, A.M.

    1990-01-01

    Actinide chloride complexes with pyridinaldazine (PAA), pyrrolaldazine(PyAA-H 2 ), furanaldazine (FAA), and thiophenaldazine (TAA): An(L)Cl n ·m-H 2 O, where An = Th, UO 2 ; L PAA, PyAA-H 2 , FAA, TAA; n = 2,4; m = 0, 2, 3, 5 (also, mononuclear with 2L, dinuclear and trinuclear complexes) have been prepared by the reaction of ThCl 4 , UO 2 Cl 2 or UO 2 (Ac) 2 ·2H 2 O with PAA, PyAA-H 2 , FAA or TAA and characterized by spectral data, electrical conductance, thermal and elemental analysis. (author)

  2. An interior needle electropolymerized pyrrole-based coating for headspace solid-phase dynamic extraction

    Energy Technology Data Exchange (ETDEWEB)

    Bagheri, Habib [Department of Chemistry, Sharif University of Technology, Azadi Av., P.O. Box 11365-9516, Tehran (Iran, Islamic Republic of)], E-mail: bagheri@sharif.edu; Babanezhad, Esmaeil; Khalilian, Faezeh [Department of Chemistry, Sharif University of Technology, Azadi Av., P.O. Box 11365-9516, Tehran (Iran, Islamic Republic of)

    2009-02-23

    A headspace solid-phase dynamic extraction (HS-SPDE) technique was developed by the use of polypyrrole (PPy) sorbent, electropolymerized inside the surface of a needle, as a possible alternative to solid-phase microextraction (SPME). Thermal desorption was subsequently, employed to transfer the extracted analytes into the injection port of a gas chromatography-mass spectrometry (GC-MS). The PPy sorbent including polypyrrole-dodecyl sulfate (PPy-DS) was deposited on the interior surface of a stainless steel needle from the corresponding aqueous electrolyte by applying a constant deposition potential. The homogeneity and the porous surface structure of the coating were examined using the scanning electron microscopy (SEM). The developed method was applied to the trace level extraction of some polycyclic aromatic hydrocarbons (PAHs) from aqueous sample. In order to enhance the extraction efficiency and increase the partition coefficient of analytes, the stainless steel needle was cooled at 5 deg. C, while the sample solution was kept at 80 deg. C. Optimization of influential experimental conditions including the voltage of power supply, the time of PPy electrodeposition, the extraction temperature, the ionic strength and the extraction time were also investigated. The detection limits of the method under optimized conditions were in the range of 0.002-0.01 ng mL{sup -1}. The relative standard deviations (R.S.D.) at a concentration level of 0.1 ng mL{sup -1} were obtained between 7.54 and 11.4% (n = 6). The calibration curves of PAHs showed linearity in the range of 0.01-10 ng mL{sup -1}. The proposed method was successfully applied to the extraction of some selected PAHs from real-life water samples and the relative recoveries were higher than 90% for all the analytes.

  3. 1,5-Bis(2,5-dimethyl-1H-pyrrol-1-ylnaphthalene

    Directory of Open Access Journals (Sweden)

    A. C. Santos

    2009-11-01

    Full Text Available In the title compound, C22H22N2, the asymmetric unit contains one half-molecule. A crystallographic inversion centre is located at the mid-point of the bond common to both rings, in the central naphthalene unit. Quantum-mechanical ab initio calculations on the isolated molecule showed that the minimum energy configuration occurs when the naphthalene ring system and the pyrrolyl groups deviate only slightly from perpendicularity. In the crystal, due to the effects of crystal packing, the molecule deviates by approximately 4° from the a priori expected ideal value of 90° [C—C—N—C torsion angle = 86.11 (15°].

  4. Ruthenium(II)-catalyzed direct addition of indole/pyrrole C2-H bonds to alkynes.

    Science.gov (United States)

    Liang, Libo; Fu, Shaomin; Lin, Dongen; Zhang, Xiao-Qi; Deng, Yuanfu; Jiang, Huanfeng; Zeng, Wei

    2014-10-17

    A ruthenium-catalyzed C2-hydroindolation of alkynes has been achieved. This protocol provides a rapid and concise access to kinds of 2-alkenyl-substituted N-(2-pyridyl)indoles in which the pyridyl moiety can be easily removed to afford free (N-H) indoles under mild conditions. Various arenes and alkynes, including electron-deficient and electron-rich internal alkynes and terminal alkynes, allow for this transformation.

  5. The Influence of Preparation Conditions on the Electrical Conductivity of Poly N-Methyl-pyrrole Films

    DEFF Research Database (Denmark)

    Vidanapathirana, K.; Careem, M.A.; Skaarup, Steen

    1999-01-01

    on the electrical conductivity has been investigated. The conductivity was measured by the in situ method using a specially prepared two-band microelectrode. The current density used during the polymerization has a considerable influence on the conductivity, as earlier observed for polypyrrole in non......Electro-active poly-N-methylpyrrole (PNMP) films have been galvanostatically polymerized under a range of conditions. The influence of the conditions used in electropolymerization, such as electrolyte concentration, current density, type of doping anion. and temperature during polymerization......-aqueous electrolytes. The conductivity changes with the size of the anion and the concentration of the electrolyte as well as on the temperature at which the polymerization was carried out. Polymer films formed at relatively higher temperatures had lower conductivities and were not able to insert as many counterions...

  6. An iterative nonribosomal peptide synthetase assembles the pyrrole-amide antibiotic congocidine in Streptomyces ambofaciens

    Czech Academy of Sciences Publication Activity Database

    Juguet, M.; Lautru, S.; Francou, F.-X.; Nezbedová, Šárka; Leblond, P.; Gondry, M.; Pernodet, J. L.

    2009-01-01

    Roč. 16, č. 4 (2009), s. 421-431 ISSN 1074-5521 Institutional research plan: CEZ:AV0Z50200510 Keywords : ADENYLATION DOMAINS * ESCHERICHIA-COLI * FUNCTIONAL-ANALYSIS Subject RIV: CE - Biochemistry Impact factor: 6.523, year: 2009

  7. Study of the Pyrrol/Diphenylamine Copolymer by FT-IR spectroscopy and conductivity

    Directory of Open Access Journals (Sweden)

    Carlos Alberto Perez

    2004-01-01

    Full Text Available The main goal of this study was to analyze the physical properties of the copolymer formed by the electrochemical deposition of the polydiphenylamine (PDPA on polypyrrole (Ppy and Ppy on PDPA, in different conditions, through the characterization of the materials formed by the resonant Raman, FT-IR and conductivity techniques. The interactions among the species which are present in the new copolymer structure and the changes in electronic conductivity, were verified. The copolymer was also synthesized electrochemically in the presence of iodide species and the material was characterized by FT-IR spectroscopy and conductivity. The role of the dopant was studied in the process of charge transfer between the copolymer-dopant, acting in the stabilization of the species in the polymer backbone and the increase of the electronic conductivity.

  8. Synthesis, characterization and anticancer studies of new steroidal oxadiazole, pyrrole and pyrazole derivatives

    Directory of Open Access Journals (Sweden)

    Shamsuzzaman

    2015-07-01

    Full Text Available In the present study steroidal derivatives, 3β-[5′-mercapto-1′,3′,4′-oxadiazole-2-yl]methoxy cholest-5-ene 2, 3β-[2′,5′-dimethylpyrrole-1-yl]aminocarbonylmethoxycholest-5-ene 3 and 3β-[3′,5′-dimethyl pyrazole-1-yl]carbonylmethoxycholest-5-ene 4 have been synthesized from cholest-5-en-3β-O-acetyl hydrazide 1 using CS2/KOH, acetonyl acetone and acetyl acetone, respectively as reagents and are characterized by IR, 1H NMR,13C NMR, MS and elemental analysis. Compounds 2–4 were also evaluated for anticancer activity against human leukemia cell line (HL-60 by MTT assay and compound 4 displayed the promising behavior by showing better anticancer activity.

  9. 3-/3,5-Pyrrole-substituted BODIPY derivatives and their ...

    Indian Academy of Sciences (India)

    ence of transition metal catalysts and recently without using metal ... of 100–200 mesh size. The 1H and .... one or two equivalents of N-bromosuccinimide at low temperature (− ... Further, on increasing the reaction temperature in a step of 10.

  10. Interaction of the cesium cation with meso-octamethylcalix[4]pyrrole: Experimental and theoretical study

    Czech Academy of Sciences Publication Activity Database

    Polášek, Miroslav; Makrlík, E.; Kvíčala, J.; Křížová, Věra; Vaňura, P.

    2017-01-01

    Roč. 670, FEB 2017 (2017), s. 22-26 ISSN 0009-2614 Grant - others:GA MŠk(CZ) 20/2015; GA MŠk(CZ) LM2010005 Institutional support: RVO:61388955 Keywords : Aromatic compounds * Cesium * Electrospray ionization Subject RIV: CF - Physical ; Theoretical Chemistry OBOR OECD: Physical chemistry Impact factor: 1.815, year: 2016

  11. 7-N-Acetylcysteine-pyrrole conjugate-A potent DNA reactive metabolite of pyrrolizidine alkaloids.

    Science.gov (United States)

    He, Xiaobo; Ma, Liang; Xia, Qingsu; Fu, Peter P

    2016-10-01

    Plants containing pyrrolizidine alkaloids (PAs) are widespread throughout the world and are the most common poisonous plants affecting livestock, wildlife, and humans. PAs require metabolic activation to form reactive dehydropyrrolizidine alkaloids (dehydro-PAs) that are capable of alkylating cellular DNA and proteins, form (±)-6,7-dihydro-7-hydroxy-1-hydroxymethyl-5H-pyrrolizine (DHP)-DNA and DHP-protein adducts, and lead to cytotoxicity, genotoxicity, and tumorigenicity. In this study, we determined that the metabolism of riddelliine and monocrotaline by human and rat liver microsomes in the presence of N-acetylcysteine both produced 7-N-acetylcysteine-DHP (7-NAC-DHP) and DHP. Reactions of 7-NAC-DHP with 2'-deoxyguanosine (dG), 2'-deoxyadenosine (dA), and calf thymus DNA in aqueous solution followed by enzymatic hydrolysis yielded DHP-dG and/or DHP-dA adducts. These results indicate that 7-NAC-DHP is a reactive metabolite that can lead to DNA adduct formation. Copyright © 2016. Published by Elsevier B.V.

  12. 7-cysteine-pyrrole conjugate: A new potential DNA reactive metabolite of pyrrolizidine alkaloids.

    Science.gov (United States)

    He, Xiaobo; Xia, Qingsu; Ma, Liang; Fu, Peter P

    2016-01-01

    Pyrrolizidine alkaloids (PAs) require metabolic activation to exert cytotoxicity, genotoxicity, and tumorigenicity. We previously reported that (±)-6,7-dihydro-7-hydroxy-1-hydroxymethyl-5H-pyrrolizine (DHP)-derived DNA adducts are responsible for PA-induced liver tumor formation in rats. In this study, we determined that metabolism of riddelliine and monocrotaline by human or rat liver microsomes produced 7-cysteine-DHP and DHP. The metabolism of 7-glutathionyl-DHP by human and rat liver microsomes also generated 7-cysteine-DHP. Further, reaction of 7-cysteine-DHP with calf thymus DNA in aqueous solution yielded the described DHP-derived DNA adducts. This study represents the first report that 7-cysteine-DHP is a new PA metabolite that can lead to DNA adduct formation.

  13. 7-N-Acetylcysteine-pyrrole conjugate—A potent DNA reactive metabolite of pyrrolizidine alkaloids

    Directory of Open Access Journals (Sweden)

    Xiaobo He

    2016-10-01

    Full Text Available Plants containing pyrrolizidine alkaloids (PAs are widespread throughout the world and are the most common poisonous plants affecting livestock, wildlife, and humans. PAs require metabolic activation to form reactive dehydropyrrolizidine alkaloids (dehydro-PAs that are capable of alkylating cellular DNA and proteins, form (±-6,7-dihydro-7-hydroxy-1-hydroxymethyl-5H-pyrrolizine (DHP-DNA and DHP-protein adducts, and lead to cytotoxicity, genotoxicity, and tumorigenicity. In this study, we determined that the metabolism of riddelliine and monocrotaline by human and rat liver microsomes in the presence of N-acetylcysteine both produced 7-N-acetylcysteine-DHP (7-NAC-DHP and DHP. Reactions of 7-NAC-DHP with 2′-deoxyguanosine (dG, 2′-deoxyadenosine (dA, and calf thymus DNA in aqueous solution followed by enzymatic hydrolysis yielded DHP-dG and/or DHP-dA adducts. These results indicate that 7-NAC-DHP is a reactive metabolite that can lead to DNA adduct formation.

  14. Enrichment of Pyrrolic Nitrogen by Hole Defects in Nitrogen and Sulfur Co-Doped Graphene Hydrogel for Flexible Supercapacitors.

    Science.gov (United States)

    Tran, Ngoc Quang; Kang, Bong Kyun; Woo, Moo Hyun; Yoon, Dae Ho

    2016-08-23

    The effect of the doping configuration and concentration of nitrogen (N) and sulfur (S) on the electrochemical performance of 3 D N and S co-doped hole defect graphene hydrogel (NS-HGH) electrodes is investigated. Surprisingly, by introducing a hole defect on the graphene surface, the difference in the doping concentrations of N and S can be used to effectively modulate the electrochemical behavior of the NS-HGH. The hole defects provide a rapid ion diffusion path. Finally, we showed that the intriguing specific capacitance (536 F g(-1) ) of the NS-HGH could enhance the overall performance of the pseudocapacitance and electric double layer capacitance. The rational design of the NS-HGH-based flexible solid state supercapacitor results in not only outstanding electrochemical performance with a maximum energy density of 14.8 Wh kg(-1) and power density of 5.2 KW kg(-1) but also in extraordinary mechanical flexibility and excellent cycle stability. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Radiation losses in microwave K_u region by conducting pyrrole/barium titanate and barium hexaferrite based nanocomposites

    International Nuclear Information System (INIS)

    Kaur, Talwinder; Kumar, Sachin; Narang, S.B.; Srivastava, A.K.

    2016-01-01

    Nanocomposites of substituted barium hexaferrite and barium titanate embedded in a polymer were synthesized via emulsion polymerization. The study was performed by using X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, electron spin resonance spectroscopy, a vibrating sample magnetometer and a vector network analyzer. It is found that maximum radiation loss occur at 16.09 GHz (−14.23 dB) frequency owing to the combined effect of conducting polymer, suitable dielectric and magnetic material. This suggests that prepared material is suitable for radiation losses. Micro structural study reveals the presence of all the phases of the compounds comprises composite. Benzene ring absorption band (at 1183 cm"−"1) in FT-IR spectra illustrates the presence of polymer. Surface morphology reveals the presence of array of particles encapsulated by the polymer. - Highlights: • Composites having polymer, barium titanate and hexaferrite have been successfully prepared. • Effective radiation absorption and losses have been achieved. • Magnetic properties have made an impact on shielding effectiveness.

  16. Radiation losses in microwave K{sub u} region by conducting pyrrole/barium titanate and barium hexaferrite based nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Kaur, Talwinder [Department of Physics, Lovely Professional University, Phagwara 144411 (India); Kumar, Sachin [Department of Chemistry, Guru Nanak Dev University, Amritsar 143005 (India); Narang, S.B. [Department of Electronics Technology, Guru Nanak Dev University, Amritsar 143005 (India); Srivastava, A.K., E-mail: srivastava_phy@yahoo.co.in [Department of Physics, Lovely Professional University, Phagwara 144411 (India)

    2016-12-15

    Nanocomposites of substituted barium hexaferrite and barium titanate embedded in a polymer were synthesized via emulsion polymerization. The study was performed by using X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, electron spin resonance spectroscopy, a vibrating sample magnetometer and a vector network analyzer. It is found that maximum radiation loss occur at 16.09 GHz (−14.23 dB) frequency owing to the combined effect of conducting polymer, suitable dielectric and magnetic material. This suggests that prepared material is suitable for radiation losses. Micro structural study reveals the presence of all the phases of the compounds comprises composite. Benzene ring absorption band (at 1183 cm{sup −1}) in FT-IR spectra illustrates the presence of polymer. Surface morphology reveals the presence of array of particles encapsulated by the polymer. - Highlights: • Composites having polymer, barium titanate and hexaferrite have been successfully prepared. • Effective radiation absorption and losses have been achieved. • Magnetic properties have made an impact on shielding effectiveness.

  17. Ion-Regulated Allosteric Binding of Fullerenes (C-60 and C-70) by Tetrathiafulvalene-Calix[4]pyrroles

    DEFF Research Database (Denmark)

    Davis, C. M.; Lim, J. M.; Larsen, K. R.

    2014-01-01

    of the C4P in a ball-and-socket binding mode. The interactions between the TTF-C4P receptors and the fullerene guests are highly influenced by both the nature of halide anions and their counter tetraalkylammonium cations. Three halides (F-, Cl-, and Br-) were studied. All three potentiate the binding...

  18. Crystal structure of 2-tert-butyl-2,3-dihydro-1H-benzo[c]pyrrol-1-one

    Czech Academy of Sciences Publication Activity Database

    Donkeng Dazie, Joel; Ludvík, Jiří; Fábry, Jan; Eigner, Václav

    2017-01-01

    Roč. 73, č. 8 (2017), s. 1184-1188 ISSN 2056-9890 R&D Projects: GA ČR GA13-21704S; GA MŠk(CZ) LO1603 EU Projects: European Commission(CZ) CZ.2.16/3.1.00/24510 Institutional support: RVO:61388955 ; RVO:68378271 Keywords : crystal structure * aromaticity * heterocyclic compounds Subject RIV: CF - Physical ; Theoretical Chemistry; BM - Solid Matter Physics ; Magnetism (FZU-D) OBOR OECD: Physical chemistry; Condensed matter physics (including formerly solid state physics, supercond.) (FZU-D)

  19. DNA damage due to perfluorooctane sulfonate based on nano-gold embedded in nano-porous poly-pyrrole film

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Liping, E-mail: lipinglu@bjut.edu.cn; Xu, Laihui; Kang, Tianfang; Cheng, Shuiyuan

    2013-11-01

    DNA damage induced from perfluorooctane sulfonate (PFOS) was further developed on a nano-porous bionic interface. The interface was formed by assembling DNA on nano-gold particles which were embedded in a nano-porous overoxidized polypyrrole film (OPPy). Atomic force microscopy, scanning electron microscope and electrochemical investigations indicate that OPPy can be treated to form nano-pore structures. DNA damage due to PFOS was proved using electrochemistry and X-ray photoelectron spectroscopy (XPS) and was investigated by detecting differential pulse voltammetry (DPV) response of methylene blue (MB) which was used as electro-active indicator in the system. The current of MB attenuates obviously after incubation of DNA in PFOS. Moreover, electrochemical impedance spectroscopy (EIS) demonstrates that PFOS weakens DNA charge transport. The tentative binding ratio of PFOS: DNA base pair was obtained by analyzing XPS data of this system.

  20. Sequence-specific DNA alkylation targeting for Kras codon 13 mutation by pyrrole-imidazole polyamide seco-CBI conjugates.

    Science.gov (United States)

    Taylor, Rhys Dylan; Asamitsu, Sefan; Takenaka, Tomohiro; Yamamoto, Makoto; Hashiya, Kaori; Kawamoto, Yusuke; Bando, Toshikazu; Nagase, Hiroki; Sugiyama, Hiroshi

    2014-01-27

    Hairpin N-methylpyrrole-N-methylimidazole polyamide seco-CBI conjugates 2-6 were designed for synthesis by Fmoc solid-phase synthesis, and their DNA-alkylating activities against the Kras codon 13 mutation were compared by high-resolution denaturing gel electrophoresis with 225 base pair (bp) DNA fragments. Conjugate 5 had high reactivity towards the Kras codon 13 mutation site, with alkylation occurring at the A of the sequence 5'-ACGTCACCA-3' (site 2), including minor 1 bp-mismatch alkylation against wild type 5'-ACGCCACCA-3' (site 3). Conjugate 6, which differs from conjugate 5 by exchanging one Py unit with a β unit, showed high selectivity but only weakly alkylated the A of 5'-ACGTCACCA-3' (site 2). The hairpin polyamide seco-CBI conjugate 5 thus alkylates according to Dervan's pairing rule with the pairing recognition which β/β pair targets T-A and A-T pairs. SPR and a computer-minimized model suggest that 5 binds to the target sequence with high affinity in a hairpin conformation, allowing for efficient DNA alkylation. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Preparation and characterization of poly-pyrrole thin films functionalized by ion exchanger groups. Application to preparation of alpha sources

    International Nuclear Information System (INIS)

    Stephan, Olivier

    1995-01-01

    After having outlined that dosing methods still present problems related to chemical separations techniques used before radioactivity measurements, and to spectrometric methods, this research thesis proposes the study of a new method of fabrication of a radioactive source. This method comprises the fabrication of a chemically reactive thin film by electro-polymerization, and the incorporation of actinides in the deposit by ion exchange. In this case, the deposit thickness could be controlled and the material transfer chemical mechanisms could be predicted and controlled [fr

  2. Thiophene-free diphenyl-amino-stilbene-diketo-pyrrolo-pyrrole derivatives as donors for organic bulk heterojunction solar cell

    Czech Academy of Sciences Publication Activity Database

    Honová, J.; Luňák, S.; Vala, M.; Stříteský, S.; Fekete, Ladislav; Weiter, M.; Kovalenko, A.

    2016-01-01

    Roč. 70, č. 10 (2016), s. 1416-1424 ISSN 0366-6352 R&D Projects: GA MŠk LO1409; GA ČR(CZ) GA15-05095S; GA MŠk LM2015088 Institutional support: RVO:68378271 Keywords : organic solar cell * thiophene-free * diphenyl-amino-stilbene * hole mobility * molecular structure Subject RIV: BM - Solid Matter Physics ; Magnetism OBOR OECD: Condensed matter physics (including formerly solid state physics, supercond.) Impact factor: 1.258, year: 2016

  3. Tetraaryl-, Pentaaryl-, and Hexaaryl-1,4-dihydropyrrolo 3,2-b pyrroles: Synthesis and Optical Properties

    DEFF Research Database (Denmark)

    Krzeszewski, M.; Thorsted, B.; Brewer, J.

    2014-01-01

    . Strategic placement of electron-withdrawing substituents at the 2-, 3-, 5-, and 6-positions produced an acceptor donor acceptor type fluorophore. The resulting multiply substituted heteropentalenes displayed intriguing optical properties. The relationship between the structure and photophysical properties...

  4. Novel copper doped Halloysite Nano Tube/silver-poly(pyrrole-co-3,4-ethylenedioxythiophene dual layer coatings on low nickel stainless steel for anti-corrosion applications

    Directory of Open Access Journals (Sweden)

    Palanisamy Karthikeyan

    2018-03-01

    Full Text Available The increase of the diverse and complicated applications of stainless steel in all fields of industry production and various research activities have induced immense efforts in research and fabrication to increase its efficiency and sophisticated to minimize its corrosion by using among others conducting polymer coatings. The present work discusses the corrosion resistant behavior of stainless steel with copolymer and composite dual layer coatings. The coated samples were analyzed by various analytical studies and the results are discussed. The dual layer composite coating Ag-p(Py-co-EDOT thus obtained was uniform in nature and highly adherent to the stainless steel surface, when compared to the monolayer coatings. An antibacterial effect of coating and the coatings against marine and pathogenic bacteria have also been studied. Keywords: Dual layer coatings, Electrochemical studies, Surface analysis, Antibacterial activity, Ion leachout test

  5. Crystal structure of 3-methyl-1-phenyl-5-(1H-pyrrol-1-yl-1H-pyrazole-4-carbaldehyde

    Directory of Open Access Journals (Sweden)

    Joel T. Mague

    2014-10-01

    Full Text Available In the title compound, C15H13N3O, the pyrrolyl and phenyl rings make dihedral angles of 58.99 (5 and 34.95 (5°, respectively, with the central pyrazole ring. In the crystal, weak, pairwise C—H...O interactions across centers of symmetry form dimers, which are further associated into corrugated sheets running approximately parallel to (100 via weak C—H...N interactions.

  6. Structure-based lead optimization to improve antiviral potency and ADMET properties of phenyl-1H-pyrrole-carboxamide entry inhibitors targeted to HIV-1 gp120.

    Science.gov (United States)

    Curreli, Francesca; Belov, Dmitry S; Kwon, Young Do; Ramesh, Ranjith; Furimsky, Anna M; O'Loughlin, Kathleen; Byrge, Patricia C; Iyer, Lalitha V; Mirsalis, Jon C; Kurkin, Alexander V; Altieri, Andrea; Debnath, Asim K

    2018-05-12

    We are continuing our concerted effort to optimize our first lead entry antagonist, NBD-11021, which targets the Phe43 cavity of the HIV-1 envelope glycoprotein gp120, to improve antiviral potency and ADMET properties. In this report, we present a structure-based approach that helped us to generate working hypotheses to modify further a recently reported advanced lead entry antagonist, NBD-14107, which showed significant improvement in antiviral potency when tested in a single-cycle assay against a large panel of Env-pseudotyped viruses. We report here the synthesis of twenty-nine new compounds and evaluation of their antiviral activity in a single-cycle and multi-cycle assay to derive a comprehensive structure-activity relationship (SAR). We have selected three inhibitors with the high selectivity index for testing against a large panel of 55 Env-pseudotyped viruses representing a diverse set of clinical isolates of different subtypes. The antiviral activity of one of these potent inhibitors, 55 (NBD-14189), against some clinical isolates was as low as 63 nM. We determined the sensitivity of CD4-binding site mutated-pseudoviruses to these inhibitors to confirm that they target HIV-1 gp120. Furthermore, we assessed their ADMET properties and compared them to the clinical candidate attachment inhibitor, BMS-626529. The ADMET data indicate that some of these new inhibitors have comparable ADMET properties to BMS-626529 and can be optimized further to potential clinical candidates. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

  7. Crystal structure of bis[4-(1H-pyrrol-1-ylphenyl] ferrocene-1,1′-dicarboxylate: a potential chemotherapeutic drug

    Directory of Open Access Journals (Sweden)

    Wanda I. Pérez

    2015-05-01

    Full Text Available The title iron(II complex, [Fe(C16H12NO22], crystallizes in the orthorhombic space group Pbca with the Fe2+ cation positioned on an inversion center. The cyclopentadienyl (Cp rings adopt an anti conformation in contrast with other substituted ferrocenes in which the Cp rings appear in a nearly eclipsed conformation. The Cp and the aromatic rings are positioned out of the plane, with a twist angle of 70.20 (12°, and the C(Cp—C(CO bond length is shorter than a typical C—C single bond, which suggests a partial double-bond character and delocalization with the Cp π system. The structure of the complex is compared to other functionalized ferrocenes synthesized in our laboratory.

  8. Crystal structure of trans-dichloridobis[N-(5,5-dimethyl-4,5-dihydro-3H-pyrrol-2-yl-κNacetamide]palladium(II dihydrate

    Directory of Open Access Journals (Sweden)

    Jamal Lasri

    2017-04-01

    Full Text Available The title complex, [PdCl2(C8H14N2O2]·2H2O, was obtained by N–O bond cleavage of the oxadiazoline rings of the trans-[dichlorido-bis(2,5,5-trimethyl-5,6,7,7a-tetrahydropyrrolo[1,2-b][1,2,4]oxadiazole-N1]palladium(II complex. The palladium(II atom exhibits an almost square-planar coordination provided by two trans-arranged chloride anions and a nitrogen atom from each of the two neutral organic ligands. In the crystal, N—H...O, O—H...O and O—H...Cl hydrogen bonds link complex molecules into double layers parallel to the bc plane.

  9. CCDC 1404072: Experimental Crystal Structure Determination : difluoro(2-((pentafluorophenyl)(5-(triphenylvinyl)-2H-pyrrol-2-ylidene)methyl)-5-(triphenylvinyl)-1H-pyrrolato)borate

    KAUST Repository

    Chua, Ming Hui; Huang, Kuo-Wei; Xu, Jianwei; Wu, Jishan

    2015-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

  10. 2,3-Di­phenyl­male­imide 1-methyl­pyrrol­idin-2-one monosolvate

    Science.gov (United States)

    Bulatov, Evgeny; Boyarskaya, Dina; Chulkova, Tatiana; Haukka, Matti

    2014-01-01

    In the title compound, C16H11NO2·C5H9NO, the dihedral angles between the male­imide and phenyl rings are 34.7 (2) and 64.8 (2)°. In the crystal, the 2,3-di­phenyl­male­imide and 1-methyl­pyrrolidin-2-one mol­ecules form centrosymmetrical dimers via pairs of strong N—H⋯O hydrogen bonds and π–π stacking inter­actions between the two neighboring male­imide rings [centroid–centroid distance = 3.495 (2) Å]. The dimers are further linked by weak C—H⋯O and C—H⋯π hydrogen bonds into a three-dimensional framework. PMID:24764976

  11. A novel, three-component reaction to the synthesis of 3-amino-4-cyano-5-aryl-1H-pyrrole-2-carboxamides

    Czech Academy of Sciences Publication Activity Database

    Mohammadi, B.; Khorrami, B.R.; Ghorbani, M.; Dušek, Michal

    2017-01-01

    Roč. 73, č. 52 (2017), s. 7291-7294 ISSN 0040-4020 Institutional support: RVO:68378271 Keywords : amidopyrrole * multi-component reaction * water * malononitrile * hydroxylamine hydrochloride Subject RIV: BM - Solid Matter Physics ; Magnetism OBOR OECD: Condensed matter physics (including formerly solid state physics, supercond.) Impact factor: 2.651, year: 2016

  12. Planarity of substituted pyrrole and furan rings in (3R*, 1'S*, 3'R*)-3-(1'-tert-butylamino-1'H, 3'H-benzo[c] furan-3'- yl)-2-tert-butyl-2,3-dihydro-1H-benzo[c] pyrrol-1-one

    Czech Academy of Sciences Publication Activity Database

    Donkeng Dazie, Joel; Liška, Alan; Ludvík, Jiří; Fábry, Jan; Dušek, Michal; Eigner, Václav

    2017-01-01

    Roč. 232, č. 6 (2017), s. 441-452 ISSN 2194-4946 R&D Projects: GA ČR GA13-21704S; GA MŠk(CZ) LO1603 EU Projects: European Commission(CZ) CZ.2.16/3.1.00/24510 Institutional support: RVO:61388955 ; RVO:68378271 Keywords : crystal structure analysis * isobenzofuran * isoindolinone Subject RIV: CF - Physical ; Theoretical Chemistry; BM - Solid Matter Physics ; Magnetism (FZU-D) OBOR OECD: Physical chemistry; Condensed matter physics (including formerly solid state physics, supercond.) (FZU-D) Impact factor: 3.179, year: 2016

  13. Synthesis of 3-[(coumarinyl)carbonyl]-3a,8b-dihyroindeno[1,2-b]pyrrole-4(1H)-ones and their conversion to coumarin bearing spiro [isobenzofuran-1,2’-pyrrole] moiety compounds via oxidative cleavage reaction.

    Czech Academy of Sciences Publication Activity Database

    Alizadeh, A.; Ghanbaripour, R.; Feizabadi, M.; Zhu, L.G.; Dušek, Michal

    2015-01-01

    Roč. 5, č. 98 (2015), s. 80518-80525 ISSN 2046-2069 Institutional support: RVO:68378271 Keywords : coumarin * spirocyclic frameworks * oxidative cleavage Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.289, year: 2015

  14. EFSA CEF Panel (EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids), 2015. Scientific Opinion on Flavouring Group Evaluation 77, Revision 2 (FGE.77Rev2): Consideration of Pyridine, Pyrrole and Quinoline Derivatives evaluated by JECFA (63rd meeting) structurally related to Pyridine, Pyrrole, Indole and Quinoline Derivatives evaluated by EFSA in FGE.24Rev2 (2013)

    DEFF Research Database (Denmark)

    Beltoft, Vibe Meister; Nørby, Karin Kristiane

    the concern with respect to genotoxicity in vitro and accordingly the substance is not evaluated through the Procedure. For 21 substances [FL-no: 13.134, 14.001, 14.004, 14.007, 14.030, 14.038, 14.039, 14.041, 14.045, 14.046, 14.047, 14.058, 14.059, 14.060, 14.061, 14.065, 14.066, 14.068, 14.071, 14...

  15. CCDC 1422462: Experimental Crystal Structure Determination : difluoro(2-(phenyl(5-(1,2,2-triphenylethyl)-2H-pyrrol-2-ylidene)methyl)-5-(triphenylvinyl)-1H-pyrrolato)borate

    KAUST Repository

    Chua, Ming Hui

    2015-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

  16. Antifungal agents. 10. New derivatives of 1-[(aryl)[4-aryl-1H-pyrrol-3-yl]methyl]-1H-imidazole, synthesis, anti-candida activity, and quantitative structure-analysis relationship studies.

    Science.gov (United States)

    Tafi, Andrea; Costi, Roberta; Botta, Maurizio; Di Santo, Roberto; Corelli, Federico; Massa, Silvio; Ciacci, Andrea; Manetti, Fabrizio; Artico, Marino

    2002-06-20

    The synthesis, anti-Candida activity, and quantitative structure-activity relationship (QSAR) studies of a series of 2,4-dichlorobenzylimidazole derivatives having a phenylpyrrole moiety (related to the antibiotic pyrrolnitrin) in the alpha-position are reported. A number of substituents on the phenyl ring, ranging from hydrophobic (tert-butyl, phenyl, or 1-pyrrolyl moiety) to basic (NH(2)), polar (CF(3), CN, SCH(3), NO(2)), or hydrogen bond donors and acceptor (OH) groups, were chosen to better understand the interaction of these compounds with cytochrome P450 14-alpha-lanosterol demethylase (P450(14DM)). Finally, the triazole counterpart of one of the imidazole compounds was synthesized and tested to investigate influence of the heterocyclic ring on biological activity. The in vitro antifungal activities of the newly synthesized azoles 10p-v,x-c' were tested against Candida albicans and Candida spp. at pH 7.2 and pH 5.6. A CoMFA model, previously derived for a series of antifungal agents belonging to chemically diverse families related to bifonazole, was applied to the new products. Because the results produced by this approach were not encouraging, Catalyst software was chosen to perform a new 3D-QSAR study. Catalyst was preferred this time because of the possibility of considering each compound as a collection of energetically reasonable conformations and of considering alternative stereoisomers. The pharmacophore model developed by Catalyst, named HYPO1, showed good performances in predicting the biological activity data, although it did not exhibit an unequivocal preference for one enantiomeric series of inhibitors relative to the other. One aromatic nitrogen with a lone pair in the ring plane (mapped by all of the considered compounds) and three aromatic ring features were recognized to have pharmacophoric relevance, whereas neither hydrogen bond acceptor nor hydrophobic features were found. These findings confirmed that the key interaction of azole antifungals with the demethylase enzyme is the coordination bond to the iron ion of the porphyrin system, while interactions with amino acids localized in proximity of heme could modulate the biological activity of diverse antifungal agents. In conclusion, HYPO1 conveys important information in an intuitive manner and can provide predictive capability for evaluating new compounds.

  17. CCDC 910697: Experimental Crystal Structure Determination : Tricarbonyl-(eta^5^-2-[(4-methylphenyl)sulfonyl]-5-oxido-4,6-bis(trimethylsilyl)-1,2,3,4-tetrahydrocyclopenta[c]pyrrol-4-yl)-iron

    KAUST Repository

    Dentel, H.; Moulin, S.; Pagnoux-Ozherelyeva, A.; Gaillard, S.; Poater, A.; Cavallo, Luigi; Lohier, J.-F.; Renaud, J.-L.

    2014-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from

  18. CCDC 910700: Experimental Crystal Structure Determination : Tricarbonyl-(eta^5^-2-[(4-methylphenyl)sulfonyl]-5-oxido-4,6-diphenyl-1,2,3,4-tetrahydrocyclopenta[c]pyrrol-4-yl)-iron dichloromethane solvate

    KAUST Repository

    Dentel, H.; Moulin, S.; Pagnoux-Ozherelyeva, A.; Gaillard, S.; Poater, A.; Cavallo, Luigi; Lohier, J.-F.; Renaud, J.-L.

    2014-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from

  19. CCDC 831594: Experimental Crystal Structure Determination : 2,5-bis(2-octyldodecyl)-3,6-bis(5-(pyren-2-yl)-2-thienyl)-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione

    KAUST Repository

    Lee, O.P.; Yiu, A.T.; Beaujuge, Pierre; Woo, C.H.; Holcombe, T.W.; Millstone, J.E.; Douglas, J.D.; Chen, M.S.; Frechet, Jean

    2012-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

  20. Catalytic mechanisms of direct pyrrole synthesis via dehydrogenative coupling mediated by PNP-Ir or PNN-Ru pincer complexes: Crucial role of proton-transfer shuttles in the PNP-Ir system

    KAUST Repository

    Qu, Shuanglin; Dang, Yanfeng; Song, Chunyu; Wen, Mingwei; Huang, Kuo-Wei; Wang, Zhixiang

    2014-01-01

    lower catalyst loading than the PNN-Ru system. We discuss how the differences are resulted in terms of electronic and geometric structures of the catalysts and how to use the features in catalyst development. © 2014 American Chemical Society.

  1. CCDC 836212: Experimental Crystal Structure Determination : (2R,3S)-t-Butyl 3-(4-chlorophenyl)-5-phenyl-3,4-dihydro-2H-pyrrole-2-carboxylate

    KAUST Repository

    Ma, Ting; Fu, Xiao; Kee, Choon Wee; Zong, Lili; Pan, Yuanhang; Huang, Kuo-Wei; Tan, Choon-Hong

    2011-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

  2. CCDC 1404073: Experimental Crystal Structure Determination : difluoro(2-((pentafluorophenyl)(5-(1,2,2-triphenylethyl)-2H-pyrrol-2-ylidene)methyl)-5-(triphenylvinyl)-1H-pyrrolato)borate

    KAUST Repository

    Chua, Ming Hui; Huang, Kuo-Wei; Xu, Jianwei; Wu, Jishan

    2015-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

  3. CCDC 910700: Experimental Crystal Structure Determination : Tricarbonyl-(eta^5^-2-[(4-methylphenyl)sulfonyl]-5-oxido-4,6-diphenyl-1,2,3,4-tetrahydrocyclopenta[c]pyrrol-4-yl)-iron dichloromethane solvate

    KAUST Repository

    Dentel, H.

    2014-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

  4. CCDC 910697: Experimental Crystal Structure Determination : Tricarbonyl-(eta^5^-2-[(4-methylphenyl)sulfonyl]-5-oxido-4,6-bis(trimethylsilyl)-1,2,3,4-tetrahydrocyclopenta[c]pyrrol-4-yl)-iron

    KAUST Repository

    Dentel, H.

    2014-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

  5. 6-(1-Benzyl-1H-pyrrol-2-yl)-2,4-dioxo-5-hexenoic acids as dual inhibitors of recombinant HIV-1 integrase and ribonuclease H, synthesized by a parallel synthesis approach.

    Science.gov (United States)

    Costi, Roberta; Métifiot, Mathieu; Esposito, Francesca; Cuzzucoli Crucitti, Giuliana; Pescatori, Luca; Messore, Antonella; Scipione, Luigi; Tortorella, Silvano; Zinzula, Luca; Novellino, Ettore; Pommier, Yves; Tramontano, Enzo; Marchand, Christophe; Di Santo, Roberto

    2013-11-14

    The increasing efficiency of HAART has helped to transform HIV/AIDS into a chronic disease. Still, resistance and drug-drug interactions warrant the development of new anti-HIV agents. We previously discovered hit 6, active against HIV-1 replication and targeting RNase H in vitro. Because of its diketo-acid moiety, we speculated that this chemotype could serve to develop dual inhibitors of both RNase H and integrase. Here, we describe a new series of 1-benzyl-pyrrolyl diketohexenoic derivatives, 7a-y and 8a-y, synthesized following a parallel solution-phase approach. Those 50 analogues have been tested on recombinant enzymes (RNase H and integrase) and in cell-based assays. Approximately half (22) exibited inhibition of HIV replication. Compounds 7b, 7u, and 8g were the most active against the RNase H activity of reverse-transcriptase, with IC50 values of 3, 3, and 2.5 μM, respectively. Compound 8g was also the most potent integrase inhibitor with an IC50 value of 26 nM.

  6. The formation of [M-H]+ ions in N-alkyl-substituted thieno[3,4-c]-pyrrole-4,6-dione derivatives during atmospheric pressure photoionization mass spectrometry

    KAUST Repository

    Sioud, Salim; Kharbatia, Najeh M.; Amad, Maan H.; Zhu, Zhiyong; Cabanetos, Clement; Lesimple, Alain; Beaujuge, Pierre

    2014-01-01

    under APPI conditions.METHODS Multiple experimental parameters, including the type of ionization source, the composition of the solvent, the type of dopant, the infusion flow rate, and the length of the alkyl side chain were investigated to determine

  7. CCDC 1422462: Experimental Crystal Structure Determination : difluoro(2-(phenyl(5-(1,2,2-triphenylethyl)-2H-pyrrol-2-ylidene)methyl)-5-(triphenylvinyl)-1H-pyrrolato)borate

    KAUST Repository

    Chua, Ming Hui; Huang, Kuo-Wei; Xu, Jianwei; Wu, Jishan

    2015-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from

  8. Crystal structure of trans-di-chloridobis-[N-(5,5-di-methyl-4,5-di-hydro-3H-pyrrol-2-yl-κN)acetamide]palladium(II) dihydrate.

    Science.gov (United States)

    Lasri, Jamal; Eltayeb, Naser Eltaher; Haukka, Matti; Babgi, Bandar A

    2017-04-01

    The title complex, [PdCl 2 (C 8 H 14 N 2 O) 2 ]·2H 2 O, was obtained by N-O bond cleavage of the oxa-diazo-line rings of the trans -[di-chlorido-bis-(2,5,5-trimethyl-5,6,7,7a-tetra-hydro-pyrrolo-[1,2- b ][1,2,4]oxa-diazole- N 1 )]palladium(II) complex. The palladium(II) atom exhibits an almost square-planar coordination provided by two trans -arranged chloride anions and a nitro-gen atom from each of the two neutral organic ligands. In the crystal, N-H⋯O, O-H⋯O and O-H⋯Cl hydrogen bonds link complex mol-ecules into double layers parallel to the bc plane.

  9. Computational study of An-X bonding (An = Th, U; X = p-block-based ligands) in pyrrolic macrocycle-supported complexes from the quantum theory of atoms in molecules and bond energy decomposition analysis.

    Science.gov (United States)

    O'Brien, Kieran T P; Kaltsoyannis, Nikolas

    2017-01-17

    A systematic computational study of organoactinide complexes of the form [LAnX] n+ has been carried out using density functional theory, the quantum theory of atoms in molecules (QTAIM) and Ziegler-Rauk energy decomposition analysis (EDA) methods. The systems studied feature L = trans-calix[2]benzene[2]pyrrolide, An = Th(iv), Th(iii), U(iii) and X = BH 4 , BO 2 C 2 H 4 , Me, N(SiH 3 ) 2 , OPh, CH 3 , NH 2 , OH, F, SiH 3 , PH 2 , SH, Cl, CH 2 Ph, NHPh, OPh, SiH 2 Ph, PHPh 2 , SPh, CPh 3 , NPh 2 , OPh, SiPh 3 PPh 2 , SPh. The PBE0 hybrid functional proved most suitable for geometry optimisations based on comparisons with available experimental data. An-X bond critical point electron densities, energy densities and An-X delocalisation indices, calculated with the PBE functional at the PBE0 geometries, are correlated with An-X bond energies, enthalpies and with the terms in the EDA. Good correlations are found between energies and QTAIM metrics, particularly for the orbital interaction term, provided the X ligand is part of an isoelectronic series and the number of open shell electrons is low (i.e. for the present Th(iv) and Th(iii) systems).

  10. CCDC 1029500: Experimental Crystal Structure Determination : 1,3-Dibromo-5-butyryl-4H-thieno[3,4-c]pyrrole-4,6(5H)-dione

    KAUST Repository

    Warnan, Julien; Cabanetos, Clement; Bude, Romain; El Labban, Abdulrahman; LI, LIANG; Beaujuge, Pierre

    2014-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

  11. 12-Benzoyl-2-methylnaphtho[2,3-b]indolizine-6,11-dione

    Directory of Open Access Journals (Sweden)

    Yun Liu

    2011-06-01

    Full Text Available In the title compound, C24H15NO3, the fused naphthaquinone–pyrrole unit is approximately planar, the naphthaquinone ring system making a dihedral angle of 2.91 (10° with the pyrrole ring. The plane of the pyrrole ring makes a dihedral angle 61.64 (14° with that of the benzene ring of the benzoylmethylene group. The crystal structure is stablized by intramolecular C—H...O interactions.

  12. Hybride magnetic nanostructure based on amino acids functionalized polypyrrole

    Energy Technology Data Exchange (ETDEWEB)

    Nan, Alexandrina, E-mail: alexandrina.nan@itim-cj.ro; Bunge, Alexander; Turcu, Rodica [National Institute for Research and Development of Isotopic and Molecular Technologies, 67-103 Donat, 400293 Cluj-Napoca (Romania)

    2015-12-23

    Conducting polypyrrole is especially promising for many commercial applications because of its unique optical, electric, thermal and mechanical properties. We report the synthesis and characterization of novel pyrrole functionalized monomers and core-shell hybrid nanostructures, consisting of a conjugated polymer layer (amino acids functionalized pyrrole copolymers) and a magnetic nanoparticle core. For functionalization of the pyrrole monomer we used several amino acids: tryptophan, leucine, phenylalanine, serine and tyrosine. These amino acids were linked via different types of hydrophobic linkers to the nitrogen atom of the pyrrole monomer. The magnetic core-shell hybrid nanostructures are characterized by various methods such as FTIR spectroscopy, transmission electron microscopy (TEM) and magnetic measurements.

  13. Stepwise π-extension of meso-alkylidenyl porphyrins through sequential 1,3-dipolar cycloaddition and redox reactions.

    Science.gov (United States)

    Park, Dowoo; Jeong, Seung Doo; Ishida, Masatoshi; Lee, Chang-Hee

    2014-08-25

    Several regioselectively π-extended, pyrrole fused porphyrinoids have been synthesized by the 1,3-dipolar cycloaddition of meso-alkylidene-(benzi)porphyrins. Pd(II) complexes gave oxidation resistant, bis-pyrrole fused adducts. The repeated 1,3-dipolar cycloaddition followed by oxidation-reduction of pentaphyrin analogs afforded π-extended porphyrin analogs.

  14. An unexpected trimethylstannylpyrrole from a stannylated derivative of tosylmethyl isocyanide (TosMIC) and chalcone

    NARCIS (Netherlands)

    Meetsma, A.; Dijkstra, H.P.; ten Have, Ronald; vanLeusen, A.M.

    1996-01-01

    The structure of the title compound, tert-butyl 3-benzoyl-4-phenyl-2- (trimethylstannyl)pyrrole-N-carboxylate, [Sn(CH3)(3)(C22H20NO3)], is one of the first in which the stannyl group is attached to a C atom of the pyrrole ring, There appears to be an intramolecular interaction between the Sn atom

  15. Rh-catalyzed Transannulation of N-Tosyl-1,2,3-Triazoles with Terminal Alkynes

    Science.gov (United States)

    Chattopadhyay, Buddhadeb; Gevorgyan, Vladimir

    2011-01-01

    The first transannulation of 1,2,3-triazoles with terminal alkynes into pyrroles is reported. The reaction proceeds in the presence of Rh2(oct)4/AgOCOCF3 binary catalyst system providing a straightforward approach to 1,2,4-trisubstituted pyrroles in good to excellent yields. PMID:21692488

  16. Journal of Chemical Sciences | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Rhodium and iridium complexes of N-(2'-hydroxyphenyl)pyrrole-2-aldimine: Synthesis, structure, and spectral and electrochemical properties · Semanti Basu Indrani Pal Ray J Butcher Georgina Rosair Samaresh Bhattacharya · More Details Abstract Fulltext PDF. Reaction of N-(2'-hydroxyphenyl)pyrrole-2-aldimine (H2L) ...

  17. Biosynthesis of two dihydropyrrole-polyketides from a marine-derived Penicillium citrinum

    Energy Technology Data Exchange (ETDEWEB)

    Romminger, Stelamar; Pimenta, Eli F.; Berlinck, Roberto G.S., E-mail: rgsberlinck@iqsc.usp.br [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil). Inst. de Quimica; Nascimento, Eduardo S.; Ferreira, Antonio G. [Universidade Federal de Sao Carlos (UFSCAR), SP (Brazil). Dept. de Quimica

    2012-10-15

    Feeding experiments with {sup 13}C-labeled precursors were performed in order to establish the biosynthesis of two N-acylated dihydro pyrroles, (8E)-1-(2,3-dihydro-1H-pyrrol-1-yl)-2-methyldec- 8-ene-1,3-dione (1) and 1-(2,3-dihydro-1H-pyrrol-1-yl)-2-methyldecane-1,3-dione (2), isolated from the cultures of a marine-derived Penicillium citrinum. The biosynthesis of both, 1 and 2, involves the incorporation of acetate, methionine and ornithine. (author)

  18. Biosynthesis of two dihydropyrrole-polyketides from a marine-derived Penicillium citrinum

    International Nuclear Information System (INIS)

    Romminger, Stelamar; Pimenta, Eli F.; Berlinck, Roberto G.S.; Nascimento, Eduardo S.; Ferreira, Antonio G.

    2012-01-01

    Feeding experiments with 13 C-labeled precursors were performed in order to establish the biosynthesis of two N-acylated dihydro pyrroles, (8E)-1-(2,3-dihydro-1H-pyrrol-1-yl)-2-methyldec- 8-ene-1,3-dione (1) and 1-(2,3-dihydro-1H-pyrrol-1-yl)-2-methyldecane-1,3-dione (2), isolated from the cultures of a marine-derived Penicillium citrinum. The biosynthesis of both, 1 and 2, involves the incorporation of acetate, methionine and ornithine. (author)

  19. Immunoassay approach for diagnosis of exposure to pyrrolizidine alkaloids.

    Science.gov (United States)

    Li, Na; Zhang, Fan; Lian, Wei; Wang, Huali; Zheng, Jiang; Lin, Ge

    2017-07-03

    Numerous pyrrolizidine alkaloid (PA) poisoning cases have been documented worldwide. Protein covalent binding with reactive metabolites generated from metabolic activation of PAs to form pyrrole-protein adducts is suggested to be a primary mechanism of PA-induced toxicities. The present study aimed to develop antibodies for diagnosis of PA exposure. Polyclonal antibodies were raised in rabbits and proven to specifically recognize pyrrole-protein adducts regardless of amino acid residues modified by the reactive metabolites of PAs. The developed antibodies were successfully applied to detect pyrrole-protein adducts in blood samples obtained from PA-treated rats and exhibited a potential for the clinical diagnosis of PA exposure.

  20. Synthesis of new pyrrole–pyridine-based ligands using an in situ Suzuki coupling method

    Directory of Open Access Journals (Sweden)

    Matthias Böttger

    2012-07-01

    Full Text Available The compounds 6-(pyrrol-2-yl-2,2‘-bipyridine, 2-(pyrrol-2-yl-1,10-phenanthroline and 2-(2-(N-methylbenz[d,e]imidazole-6-(pyrrol-2-yl-pyridine were synthesized by using an in situ generated boronic acid for the Suzuki coupling. Crystals of the products could be grown and exhibited interesting structures by X-ray analysis, one of them showing a chain-like network with the adjacent molecules linked to each other via intermolecular N–H…N hydrogen bonds.

  1. Fullerene-Free Organic Solar Cells with an Efficiency of 10.2% and an Energy Loss of 0.59 eV Based on a Thieno[3,4-c]Pyrrole-4,6-dione-Containing Wide Band Gap Polymer Donor.

    Science.gov (United States)

    Hadmojo, Wisnu Tantyo; Wibowo, Febrian Tri Adhi; Ryu, Du Yeol; Jung, In Hwan; Jang, Sung-Yeon

    2017-09-27

    Although the combination of wide band gap polymer donors and narrow band gap small-molecule acceptors achieved state-of-the-art performance as bulk heterojunction (BHJ) active layers for organic solar cells, there have been only several of the wide band gap polymers that actually realized high-efficiency devices over >10%. Herein, we developed high-efficiency, low-energy-loss fullerene-free organic solar cells using a weakly crystalline wide band gap polymer donor, PBDTTPD-HT, and a nonfullerene small-molecule acceptor, ITIC. The excessive intermolecular stacking of ITIC is efficiently suppressed by the miscibility with PBDTTPD-HT, which led to a well-balanced nanomorphology in the PBDTTPD-HT/ITIC BHJ active films. The favorable optical, electronic, and energetic properties of PBDTTPD-HT with respect to ITIC achieved panchromatic photon-to-current conversion with a remarkably low energy loss (0.59 eV).

  2. CCDC 910699: Experimental Crystal Structure Determination : Tricarbonyl-(eta^5^-2-[(4-methylphenyl)sulfonyl]-5-oxido-4,6-bis[tri(propan-2-yl)silyl]-1,2,3,4-tetrahydrocyclopenta[c]pyrrol-4-yl)-iron

    KAUST Repository

    Dentel, H.; Moulin, S.; Pagnoux-Ozherelyeva, A.; Gaillard, S.; Poater, A.; Cavallo, Luigi; Lohier, J.-F.; Renaud, J.-L.

    2014-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from

  3. CCDC 910698: Experimental Crystal Structure Determination : Tricarbonyl-(eta^5^-4,6-bis(t-butyl[di(propan-2-yl)]silyl)-2-[(4-methylphenyl)sulfonyl]-5-oxido-1,2,3,4-tetrahydrocyclopenta[c]pyrrol-4-yl)-iron

    KAUST Repository

    Dentel, H.; Moulin, S.; Pagnoux-Ozherelyeva, A.; Gaillard, S.; Poater, A.; Cavallo, Luigi; Lohier, J.-F.; Renaud, J.-L.

    2014-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from

  4. CCDC 910699: Experimental Crystal Structure Determination : Tricarbonyl-(eta^5^-2-[(4-methylphenyl)sulfonyl]-5-oxido-4,6-bis[tri(propan-2-yl)silyl]-1,2,3,4-tetrahydrocyclopenta[c]pyrrol-4-yl)-iron

    KAUST Repository

    Dentel, H.

    2014-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

  5. CCDC 910698: Experimental Crystal Structure Determination : Tricarbonyl-(eta^5^-4,6-bis(t-butyl[di(propan-2-yl)]silyl)-2-[(4-methylphenyl)sulfonyl]-5-oxido-1,2,3,4-tetrahydrocyclopenta[c]pyrrol-4-yl)-iron

    KAUST Repository

    Dentel, H.

    2014-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

  6. CCDC 874217: Experimental Crystal Structure Determination : Methyl 3-(4-bromophenyl)-5-((1-(4-bromophenyl)-4-methyl-2,5-dioxo-2,5-dihydro-1H-pyrrol-3-yl)(phenyl)methyl)-4,5-dihydro-1,2-oxazole-5-carboxylate

    KAUST Repository

    Yang, W.; Tan, Davin; Li, L.; Han, Z.; Yan, L.; Huang, Kuo-Wei; Tan, C-H.; Jiang, Z.

    2013-01-01

    An entry from the Cambridge Structural Database, the world’s repository for small molecule crystal structures. The entry contains experimental data from a crystal diffraction study. The deposited dataset for this entry is freely available from the CCDC and typically includes 3D coordinates, cell parameters, space group, experimental conditions and quality measures.

  7. Alkaloids from sponge, scaffolds for the inhibition of human immunodeficiency virus (hiv)

    KAUST Repository

    O'Rourke, Aubrie; Kremb, Stephan; Voolstra, Christian R.

    2016-01-01

    Anti-viral compounds with low cytotoxicity are identified from screening of products found in Red Sea sponges, including the sponge Stylissa carteri. The identified compounds can be brominated pyrrole-2- aminoimidazole alkaloids and derivatives

  8. Fulltext PDF

    Indian Academy of Sciences (India)

    dinitroamino pyrrole derivatives were studied at the B3LYP/6-311G** level of density functional theory (DFT). The isodesmic reactions were employed to calculate the heats of formation (HOFs) for these compounds. The detonation velocity (D) and.

  9. Fulltext PDF

    Indian Academy of Sciences (India)

    School of Chemistry, University of Hyderabad, Central University (PO), Hyderabad ... Scheme 1. Synthesis of di(diindolylmethyl)carbazoles. Table 1. Synthesis of .... Chem. 47 87 142. 8. Jones R A 1992 Pyrroles, Part II (New York: Wiley). 9.

  10. Synthesis of pyrrolo(2,3-b)quinolines by palladium-catalyzed heteroannulation

    International Nuclear Information System (INIS)

    Gee, Moon Bae; Lee, Won Jung; Yum, Eul Kgun

    2003-01-01

    Palladium-catalyzed heteroannulation of 2-amino-3-iodoquinoline derivatives and 1-trimethylsilyl internal alkynes provided highly regioselective pyrrolo(2,3-b)quinolines with trimethylsilyl group next to the nitrogen atom in the pyrrole ring

  11. Componentes voláteis do café torrado. Parte I: compostos heterocíclicos Volatile components in roasted coffee. Part I: heterocyclic compounds

    Directory of Open Access Journals (Sweden)

    Carlos Alberto Bastos De Maria

    1999-04-01

    Full Text Available A review of heterocyclic compounds in roasted coffee is presented. The contents, precursors and sensorial properties of furans, pyrroles, oxazoles, thiazoles, thiophenes, pyrazines and pyridines are discussed. The impact heterocyclic compounds of coffee aroma are described.

  12. Research of coal flash hydropyrolysis. I. Chemical type analysis of nitrogen in coal and semi-coke

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, H.; Ni, Y.; Tang, L.; Zheng, Z.; Zhu, Z. [East China University of Science and Technology, Shanghai (China)

    2001-04-01

    Using XPS analyses the chemical types of nitrogen of ten different types of Chinese coals and their semi-cokes from flash hydropyrolysis (FHP) are studied. The results shows that XPS can effectively determined the chemical types of nitrogen in coal and semi-coke. Peak of XPS located in 398.8 ({plus_minus}0.1) eV and 400.2 ({plus_minus}0.1) eV, which corresponds to pyrrole and pyridine. The nitrogen types are different in coals but mainly are pyrrole and pyridine, and often the pyrrole is more than pyridine. The nitrogen type in coals from FHP is the same as in coal. In FHP, the relative content of pyrrole increases and pyridine reduces. Therefore, it was put forward that flash hydropyrolysis is a new important clean-coal technique and has notable effect of denitrogenation.

  13. Exfoliated polypyrrole-organically modified montmorillonite clay nanocomposite as a potential adsorbent for Cr (VI) removal

    CSIR Research Space (South Africa)

    Setshedi, KZ

    2013-01-01

    Full Text Available Exfoliated polypyrrole-organically modified montmorillonite clay nanocomposite (PPy OMMT NC), was prepared as a potential adsorbent, via in situ polymerization of pyrrole monomer for adsorption of toxic Cr(VI) from aqueous solution. The WAXD...

  14. Synthesis, characterization and photoluminescence properties of ...

    Indian Academy of Sciences (India)

    G Prabhavathi

    carbon nanomaterials reported to date contain only unsubstituted ... 2.1 Materials and characterization. Pyrrole ... trum (FTIR) was taken using the KBr pellet method on a Thermo ..... and quantum yield measurement procedure are available at.

  15. INFLUENCE OF ELECTROPOLYMERIZATION METHOD ON MORPHOLOGIES AND CAPACITIVE PROPERTIES OF POLYPYRROLE FILMS GROWING ON SILICON

    OpenAIRE

    IMENE CHIKOUCHE; ALI SAHARI; AHMED ZOUAOUI

    2014-01-01

    Two methods of Pyrrole electropolymerization were investigated to prepare polypyrrole films growing onto n-doped silicon n-Si (111): Polypyrrole films prepared by galvanostatic method exhibits toroidal morphology for thin films, and mixture of toroidal and globular morphologies for thick films. Polypyrrole films obtained from this method were characterized by lower surface roughness. Electropolymerization of pyrrole by potentiodynamic method provided Polypyrrole films with beans-like structur...

  16. Biomarkers for ragwort poisoning in horses: identification of protein targets

    Directory of Open Access Journals (Sweden)

    Beynon Robert J

    2008-08-01

    Full Text Available Abstract Background Ingestion of the poisonous weed ragwort (Senecio jacobea by horses leads to irreversible liver damage. The principal toxins of ragwort are the pyrrolizidine alkaloids that are rapidly metabolised to highly reactive and cytotoxic pyrroles, which can escape into the circulation and bind to proteins. In this study a non-invasive in vitro model system has been developed to investigate whether pyrrole toxins induce specific modifications of equine blood proteins that are detectable by proteomic methods. Results One dimensional gel electrophoresis revealed a significant alteration in the equine plasma protein profile following pyrrole exposure and the formation of a high molecular weight protein aggregate. Using mass spectrometry and confirmation by western blotting the major components of this aggregate were identified as fibrinogen, serum albumin and transferrin. Conclusion These findings demonstrate that pyrrolic metabolites can modify equine plasma proteins. The high molecular weight aggregate may result from extensive inter- and intra-molecular cross-linking of fibrinogen with the pyrrole. This model has the potential to form the basis of a novel proteomic strategy aimed at identifying surrogate protein biomarkers of ragwort exposure in horses and other livestock.

  17. An unprecedented chemospecific and stereoselective tandem nucleophilic addition/cycloaddition reaction of nucleophilic carbenes with ketenimines.

    Science.gov (United States)

    Cheng, Ying; Ma, Yang-Guang; Wang, Xiao-Rong; Mo, Jun-Ming

    2009-01-16

    The first study of the reaction between nucleophilic carbenes and ketenimines is reported. The interaction of thiazole and benzothiazole carbenes with ketenimines proceeded in a chemospecific and stereoselective manner to produce thiazole- and benzothiazole-spiro-pyrrole derivatives generally in good yields. The reaction was proposed to proceed via a tandem nucleophilic addition of carbene to the C=N bond of ketenimine followed by a stepwise [3+2] cycloaddition of the 1,3-dipolar intermediate with the C=C bond of ketenimine. This reaction provides a powerful protocol for the construction of novel polyfunctional thiazole-spiro-pyrrole or benzothiazole-spiro-pyrrole compounds that are not readily accessible by other methods.

  18. A new approach to alkaloid-like systems: synthesis and crystal structure of 1-(2-acetyl-11-methoxy-5,6-dihydro[1,3]dioxolo[4,5-g]pyrrolo[2,1-a]isoquinolin-1-ylpropan-2-one

    Directory of Open Access Journals (Sweden)

    Le Tuan Anh

    2017-11-01

    Full Text Available The title compound, C19H19NO5, (I, is the product of a domino reaction between cotarnine chloride and acetylacetylene catalysed by copper(I iodide. The molecule of (I comprises a fused tetracyclic system containing two terminal five-membered rings (pyrrole and 1,3-dioxole and two central six-membered rings (dihydropyridine and benzene. The five-membered 1,3-dioxole ring has an envelope conformation and the central six-membered dihydropyridine ring adopts a twist-boat conformation. The acyl substituent is almost coplanar with the pyrrole ring, whereas the methoxy substituent is twisted by 27.93 (16° relative to the benzene ring. The 2-oxopropan-1-yl substituent is roughly perpendicular to the pyrrole ring. In the crystal, molecules are stacked along the a-axis direction; the stacks are linked by weak C—H...O hydrogen bonds into puckered layers lying parallel to (001.

  19. Impact of primary amine group from aminophospholipids and amino acids on marine phospholipids stability: Non-enzymatic browning and lipid oxidation

    DEFF Research Database (Denmark)

    Lu, Henna Fung Sieng; Nielsen, Nina Skall; Baron, Caroline P.

    2013-01-01

    The main objective of this study was to investigate the oxidative stability and non-enzymatic browning reactions of marine PL in the presence or in the absence of primary amine group from aminophospholipids and amino acids. Marine phospholipids liposomal dispersions were prepared from two authentic......) Strecker derived volatiles, (ii) yellowness index (YI), (iii) hydrophobic and (iv) hydrophilic pyrroles content. The oxidative stability of the samples was assessed through measurement of secondary lipid derived volatile oxidation products. The result showed that the presence of PE and amino acids caused...... the formation of pyrroles, generated Strecker derived volatiles, decreased the YI development and lowered lipid oxidation. The lower degree of lipid oxidation in liposomal dispersions containing amino acids might be attributed to antioxidative properties of pyrroles or amino acids....

  20. An isoindigo containing donor-acceptor polymer: synthesis and photovoltaic properties of all-solution-processed ITO- and vacuum-free large area roll-coated single junction and tandem solar cells

    DEFF Research Database (Denmark)

    Brandt, Rasmus Guldbæk; Yue, Wei; Andersen, Thomas Rieks

    2015-01-01

    In this work, the design, synthesis, and characterization of a donor-acceptor polymer from dithieno[3,2-b:2',3'-d]pyrrole and isoindigo (i-ID) are presented. The synthesized polymer has been applied in large area ITO-free organic photovoltaics, both as spin coated and roll coated devices; the lat......In this work, the design, synthesis, and characterization of a donor-acceptor polymer from dithieno[3,2-b:2',3'-d]pyrrole and isoindigo (i-ID) are presented. The synthesized polymer has been applied in large area ITO-free organic photovoltaics, both as spin coated and roll coated devices...

  1. Metallopolymer capacitor in "one pot" by self-directed UV-assisted process.

    Science.gov (United States)

    Ijeri, Vijaykumar S; Nair, Jijeesh R; Gerbaldi, Claudio; Bongiovanni, Roberta M; Penazzi, Nerino

    2010-11-01

    Silver metalized methacrylate films are prepared by single-step UV curing process with good conductivity on both sides. The major component of the composite is Bisphenol A ethoxylate dimethacrylate, which can be photopolymerized by a photoreactive initiator under UV light. Under the same conditions of UV irradiation, silver ions are deposited as metal nanoparticles while the pyrrole is oxidized to polypyrrole. The migration of silver ions and pyrrole toward both surfaces during polymerization leads to the formation of a metallo-polymer capacitor. The composite films are characterized by SEM-EDX and electrical measurements for possible applications as capacitors in flexible and/or nonplanar electronics.

  2. Heteroaromatic-based electrolytes for lithium and lithium-ion batteries

    Science.gov (United States)

    Cheng, Gang; Abraham, Daniel P.

    2017-04-18

    The present invention provides an electrolyte for lithium and/or lithium-ion batteries comprising a lithium salt in a liquid carrier comprising heteroaromatic compound including a five-membered or six-membered heteroaromatic ring moiety selected from the group consisting of a furan, a pyrazine, a triazine, a pyrrole, and a thiophene, the heteroaromatic ring moiety bearing least one carboxylic ester or carboxylic anhydride substituent bound to at least one carbon atom of the heteroaromatic ring. Preferred heteroaromatic ring moieties include pyridine compounds, pyrazine compounds, pyrrole compounds, furan compounds, and thiophene compounds.

  3. Mild one-pot Horner-Wadsworth-Emmons olefination and intramolecular N-arylation for the syntheses of indoles, all regio-isomeric azaindoles, and thienopyrroles.

    Science.gov (United States)

    Choi, Ji Hye; Lim, Hwan Jung

    2015-05-14

    The syntheses of various N-protected aromatic-ring fused pyrrole-2-carboxylate derivatives have been accomplished using mild one-pot Horner-Wadsworth-Emmons olefination and Cu-catalyzed intramolecular N-arylation reactions. The optimized mild one-pot reaction conditions of various 2-bromo arylcarboxaldehydes with commercially available N-protected phosphonoglycine trimethylesters gave the desired aromatic-ring fused pyrrole-2-carboxylates, such as substituted indole-, all regio-isomeric azaindole-, and thienopyrrole-2-carboxylates, in good to excellent yields. These conditions showed broad substrate compatibility, without the loss of the protecting group.

  4. Water-soluble self-doped 3-substituted polypyrroles

    NARCIS (Netherlands)

    Havinga, E.E.; Hoeve, ten W.; Meijer, E.W.; Wynberg, H.

    1989-01-01

    The prepn. of Na 3-pyrrole(Cn-alkanesulfonates) (I; n = 3, 4, 6) and their electrochem. polymn. was described. The low oxidn. potential of the monomers permitted a direct oxidative electrochem. polymn., without addnl. conduction salts. The exptl. conditions provided, for the first time, solid

  5. Phase Behaviour of 1-Ethyl-3-methylimidazolium Thiocyanate Ionic Liquid with Catalytic Deactivated Compounds and Water at Several Temperatures: Experiments and Theoretical Predictions

    Directory of Open Access Journals (Sweden)

    Ramalingam Anantharaj

    2011-01-01

    Full Text Available Density, surface tension and refractive index were determined for the binary mixture of catalytic deactivated compounds with 1-ethyl-3-methylimidazolium thiocyanate {[EMIM][SCN]} at temperature of (298.15 to 323.15 K. For all the compounds with ILs, the densities varied linearly in the entire mole fraction with increasing temperature. From the obtained data, the excess molar volume and deviation of surface tension and refractive index have been calculated. A strong interaction was found between similar (cation-thiophene or cation-pyrrole compounds. The interaction of IL with dissimilar compounds such as indoline and quinoline and other multiple ring compounds was found to strongly depend on the composition of IL at any temperatures. For the mixtures, the surface tension decreases in the order of: thiophene > quinoline > pyridine > indoline > pyrrole > water. In general from the excess volume studies, the IL-sulphur/nitrogen mixture has stronger interaction as compared to IL-IL, thiophene-thiophene or pyrrole-pyrrole interaction. The deviation of surface tension was found to be inversely proportional to deviation of refractive index. The quantum chemical based COSMO-RS was used to predict the non-ideal liquid phase activity coefficient for all mixtures. It indicated an inverse relation between activity coefficient and excess molar volumes.

  6. Development of a Novel Therapeutic Paradigm Utilizing a Mammary Gland-Targeted, Bin1-Knockout Mouse Model

    Science.gov (United States)

    2008-07-01

    genes in higher organisms— Homo sapiens gene INDO, encoding indole- amine-pyrrole 2,3 dioxygenase. Available from http://www.ncbi.nlm.nih.gov/IEB...Farnesyltransferase inhibitors alter the prenylation and growth-stimulating function of RhoB. J Biol Chem 1997; 272:15591–4. 25. Routhier EL , Donover PS

  7. Redox and catalytic properties of new polypyrrole modified electrodes functionalized by [Ru(bpea)(bpy)H{sub 2}O]{sup 2+} complexes; bpea=N,N'-bis(2-pyridylmethyl)ethylamine, bpy=2,2'-bipyridine

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez, Montserrat; Romero, Isabel; Sens, Cristina; Llobet, Antoni; Deronzier, Alain

    2003-04-05

    New ruthenium(II) complexes containing one or two pyrrole-functionalized polypyridylic ligands have been prepared in order to study their electrochemical behaviour in heterogeneous phase, after anodic polymerization from CH{sub 2}Cl{sub 2} solution on an electrode surface. Complexes containing one pyrrole unit have general formula [Ru(bpea-pyr)(bpy)(L)]{sup 2+} (bpea-pyr=N-[3-bis(2-pyridylmethyl)aminopropyl]pyrrole, bpy=2,2'-bipyridine, L=Cl, complex 3, or L=H{sub 2}O, complex 1), whereas compounds having two pyrrole units correspond to [Ru(bpea-pyr)(bpy-pyr)(L)]{sup 2+} (bpy-pyr=4-methyl-4'-pyrrolylbutyl-2,2'-bipyridine, L=Cl, complex 4, or L=H{sub 2}O, complex 2). Upon oxidative polymerization, all complexes form highly stable polypyrrolic films on a graphite disk electrode surface. An electrode modified with complex 2 polypyrrole coating film, C/poly-2, has been tested as heterogeneous catalyst for the oxidation of benzyl alcohol, showing a remarkably high efficiency and notably improving the results obtained with analogous complexes in homogeneous phase.

  8. Enzyme mediated synthesis of polypyrrole in the presence of chondroitin sulfate and redox mediators of natural origin

    International Nuclear Information System (INIS)

    Grijalva-Bustamante, G.A.; Evans-Villegas, A.G.; Castillo-Castro, T. del; Castillo-Ortega, M.M.; Cruz-Silva, R.; Huerta, F.; Morallón, E.

    2016-01-01

    Polypyrrole (PPy) was synthesized by enzyme mediated oxidation of pyrrole using naturally occurring compounds as redox mediators. The catalytic mechanism is an enzymatic cascade reaction in which hydrogen peroxide is the oxidizer and soybean peroxidase, in the presence of acetosyringone, syringaldehyde or vanillin, acts as a natural catalysts. The effect of the initial reaction composition on the polymerization yield and electrical conductivity of PPy was analyzed. Morphology of the PPy particles was studied by scanning electron microscopy and transmission electron microscopy whereas the chemical structure was studied by X-ray photoelectron and Fourier transformed infrared spectroscopic techniques. The redox mediators increased the polymerization yield without a significant modification of the electronic structure of PPy. The highest conductivity of PPy was reached when chondroitin sulfate was used simultaneously as dopant and template during pyrrole polymerization. Electroactive properties of PPy obtained from natural precursors were successfully used in the amperometric quantification of uric acid concentrations. PPy increases the amperometric sensitivity of carbon nanotube screen-printed electrodes toward uric acid detection. - Highlights: • A new method of pyrrole polymerization using naturally occurring redox mediators and doping agents was studied. • The catalytic efficiency of different redox mediators toward pyrrole oxidation was evaluated. • Two different naturally occurring polymers were studied as bifunctional steric stabilizer/doping agents. • Polypyrrole improves the amperometric response of carbon nanotube screen printed electrodes toward uric acid sensing.

  9. The Determination of Rate-Limiting Steps during Soot Formation

    Science.gov (United States)

    1990-06-08

    and a CH3N precursor of acetonitrile such as 2H-aziridine although other intermediates of lower energy such as ketenimine have been identified on the...precursor of acetonitrile such as 2H-aziridine or ketenimine . Experimentally it was found that the overall rate of disappearance of pyrrole is first order

  10. Functionalized Calixpyrroles

    DEFF Research Database (Denmark)

    Vargas-Zúñiga, Gabriela; Sessler, Jonathan; Bähring, Steffen

    2016-01-01

    This chapter covers advances in the development of anion and ion pair recognition systems based on calix[4]pyrrole. The intention of this manuscript is to provide of an overview of promising systems for the sensing of relevant analytes, such as the toxic fluoride anion, phosphate anions, as well...

  11. Mass and Charge Transport in Electronically Conductive Polymers

    Science.gov (United States)

    1990-08-02

    This method is based on coating an electrode surface with an insulating nitrile butadiene rubber ( NBR ). The electrolyte for polymerization (LiCIO4...in acetonitrile) etches channels through the NBR ; pyrrole is then polymerized in these channels. After polymerization the NBR is extracted away with

  12. Kompatibilisierung von Elastomerverschnitten durch Kautschukadditive mit maßgeschneiderten Oberflächeneigenschaften

    NARCIS (Netherlands)

    Tiwari, M.; Datta, Rabin; Guo, R.; Talma, Auke; van Ooij, W.J.; Dierkes, Wilma K.; Noordermeer, Jacobus W.M.

    2014-01-01

    Gummi ist ein herausforderndes Material, dessen Funktionalität stark von der Affinität seiner unterschiedlichen Bestand­teile und seiner Morphologie abhängt. Ein Weg, Polarität und Chemie der Füllstoffoberfläche maßzuschneidern, ist die Plasmabeschichtung. Werden Acetylen, Thiophen oder Pyrrol als

  13. Overcoming incompatibility in elastomer blends by rubber additives with tailored surface properties

    NARCIS (Netherlands)

    Tiwari, M.; Datta, Rabin; Guo, R.; Talma, Auke; van Ooij, W.J.; Dierkes, Wilma K.; Noordermeer, Jacobus W.M.

    2014-01-01

    Rubber is a challenging composite material, whose functionality strongly depends on the affinity of the different materials in the composite, and its morphology. One way to tailor polarity and chemistry of the filler surface is plasma coating. When using acetylene, thiophene, or pyrrole as monomers,

  14. Overcoming Incompatibility Problems in Elastomer Blends by Tailored Surface Properties of Rubber Additives

    NARCIS (Netherlands)

    Dierkes, Wilma K.; Tiwari, M.; Guo, R.; Datta, Rabin; Talma, Auke; Noordermeer, Jacobus W.M.; van Ooij, W.J.

    2013-01-01

    Rubber is a challenging composite material, whose functionality strongly depends on the affinity of the different materials in the composite and its morphology. One way to tailor polarity and chemistry of the filler surface is plasma coating. When using acetylene, thiophene, or pyrrole as monomers,

  15. Amides and an alkaloid from Portulaca oleracea.

    Science.gov (United States)

    Kokubun, Tetsuo; Kite, Geoffrey C; Veitch, Nigel C; Simmonds, Monique S J

    2012-08-01

    A total of 16 phenolic compounds, including one new and five known N-cinnamoyl phenylethylamides, one new pyrrole alkaloid named portulacaldehyde, five phenylpropanoid acids and amides, and derivatives of benzaldehyde and benzoic acid, were isolated and identified from a polar fraction of an extract of Portulaca oleracea. Their structures were determined through spectroscopic analyses.

  16. Low frequency ac conduction and dielectric relaxation in poly(N ...

    Indian Academy of Sciences (India)

    The ac conductivity and dielectric constant of poly(N-methyl pyrrole) thin films have been investigated in the temperature range 77–350 K and in the frequency range 102–106 Hz. The well defined loss peaks have been observed in the temperature region where measured ac conductivity approaches dc conductivity.

  17. Biosynthesis of the red antibiotic, prodigiosin, in Serratia

    DEFF Research Database (Denmark)

    Williamson, Neil R; Simonsen, Henrik Toft; Ahmed, Raef A A

    2005-01-01

    The biosynthetic pathway of the red-pigmented antibiotic, prodigiosin, produced by Serratia sp. is known to involve separate pathways for the production of the monopyrrole, 2-methyl-3-n-amyl-pyrrole (MAP) and the bipyrrole, 4-methoxy-2,2'-bipyrrole-5-carbaldehyde (MBC) which are then coupled...

  18. Oxidative degradation and non-enzymatic browning due to the interaction between oxidised lipids and primary amine groups in different marine PL emulsions

    DEFF Research Database (Denmark)

    Lu, Henna Fung Sieng; Nielsen, Nina Skall; Baron, Caroline P.

    2012-01-01

    investigated through the measurement of secondary volatile compounds by solid-phase microextraction (SPME) and dynamic headspace (DHS) connected to gas chromatography (GC–MS). Non-enzymatic browning reactions were investigated through the measurement of Strecker derived volatiles, colour changes and pyrrole...

  19. Nitrogen-tuned bonding mechanism of Li and Ti adatom embedded graphene

    International Nuclear Information System (INIS)

    Lee, Sangho; Chung, Yong-Chae

    2013-01-01

    The effects of nitrogen defects on the bonding mechanism and resultant binding energy between the metal and graphene layer were investigated using density functional theory (DFT) calculations. For the graphitic N-doped graphene, Li adatom exhibited ionic bonding character, while Ti adatom showed features of covalent bonding similar to that of pristine graphene. However, in the cases of pyridinic and pyrrolic structures, partially covalent bonding characteristic occurred around N atoms in the process of binding with metals, and this particular bond formation enhanced the bond strength of metal on the graphene layer as much as it exceeded the cohesive energy of the metal bulk. Thus, Li and Ti metals are expected to be dispersed with atomic accuracy on the pyridinic and pyrrolic N-doped graphene layers. These results demonstrate that the bonding mechanism of metal–graphene complex can change according to the type of N defect, and this also affects the binding results. - Graphical abstract: Display Omitted - Highlights: • Nitrogen defects changed the bonding mechanism between metal and graphene. • Bonding character and binding results were investigated using DFT calculations. • Covalent bonding character occurred around pyridinic and pyrrolic N-doped graphene. • Pyridinic and pyrrolic N atoms are effective for metal dispersion on the graphene

  20. Journal of Chemical Sciences | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    We have designed and synthesized donor-acceptor conjugates having donor pyrene at the pyrrole- position of either free-base porphyrin or Zn(II) porphyrin using vinylene spacer. Both the dyads have been completely characterized by elemental analysis,MALDI-MS, UV-Vis., and fluorescence (steady state and ...

  1. Novel, soluble diphenyl-diketo-pyrrolopyrroles: Experimental and theoretical study

    Czech Academy of Sciences Publication Activity Database

    Vala, M.; Vyňuchal, J.; Toman, Petr; Weiter, M.; Luňák, S.

    2010-01-01

    Roč. 84, č. 2 (2010), s. 176-182 ISSN 0143-7208 R&D Projects: GA MPO FT-TA3/048; GA AV ČR IAA401770601 Institutional research plan: CEZ:AV0Z40500505 Keywords : diketo-pyrorrolo-pyrrole * DPP * photoluminescence Subject RIV: CD - Macromolecular Chemistry Impact factor: 2.635, year: 2010

  2. One-pot in situ redox synthesis of hexacyanoferrate/conductive polymer hybrids as lithium-ion battery cathodes.

    Science.gov (United States)

    Wong, Min Hao; Zhang, Zixuan; Yang, Xianfeng; Chen, Xiaojun; Ying, Jackie Y

    2015-09-14

    An efficient and adaptable method is demonstrated for the synthesis of lithium hexacyanoferrate/conductive polymer hybrids for Li-ion battery cathodes. The hybrids were synthesized via a one-pot method, involving a redox-coupled reaction between pyrrole monomers and the Li3Fe(CN)6 precursor. The hybrids showed much better cyclability relative to reported Prussian Blue (PB) analogs.

  3. Supercapacitance of Single-Walled Carbon Nanotubes-Polypyrrole Composites

    Directory of Open Access Journals (Sweden)

    Matei Raicopol

    2013-01-01

    Full Text Available The composites based on carbon nanotubes (CNTs and conducting polymers (CPs are promising materials for supercapacitor devices due to their unique nanostructure that combines the large pseudocapacitance of the CPs with the fast charging/discharging double-layer capacitance and excellent mechanical properties of the CNTs. Here, we report a new electrochemical method to obtain polypyrrole (PPY/single-walled carbon nanotube (SWCNT composites. In the first step, the SWCNTs are covalently functionalized with monomeric units of pyrrole by esterification of acyl chloride functionalized SWCNTs and N-(6-hydroxyhexylpyrrole. In the second step, the PPY/SWCNTs composites are obtained by copolymerizing the pyrrole monomer with the pyrrole units grafted on SWCNTs surface using controlled potential electrolysis. The composites were further characterized by cyclic voltammetry and electrochemical impedance spectroscopy. The results showed good electrochemical charge storage properties for the synthesized composites based on PPY and SWCNTs covalently functionalized with pyrrole units making them promising electrode materials for high power supercapacitors.

  4. Determination of Substitution Sites in Monosubstituted Five-Membered Aromatic Heterocycles

    Czech Academy of Sciences Publication Activity Database

    Schraml, Jan; Kubec, R.; Kučerová, P.

    2011-01-01

    Roč. 49, č. 3 (2011), s. 147-150 ISSN 0749-1581 R&D Projects: GA AV ČR IAA400720706 Institutional research plan: CEZ:AV0Z40720504 Keywords : pyrrole * 13c nmr * inadequate Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 1.437, year: 2011

  5. Icorporation of chiral natural compounds into heterocyclic receptors

    Czech Academy of Sciences Publication Activity Database

    Drašar, Pavel; Dukh, Mykhaylo; Král, V.; Černý, Ivan; Pouzar, Vladimír; Huong, N. T. T.

    2003-01-01

    Roč. 97, č. 8 (2003), s. 741 ISSN 0009-2770. [Zjazd chemických společností /55./. 08.09.2003-12.09.2003, Košice] Institutional research plan: CEZ:AV0Z4055905 Keywords : phenantroline * calix[4]pyrroles * sugars Subject RIV: CC - Organic Chemistry

  6. George et al (2)

    African Journals Online (AJOL)

    Timothy Ademakinwa

    INTRODUCTION. A Porphyrin is a heterocyclic compound consisting of four pyrrole rings joined together by the methylene bridges. It has 22 ð electrons of which only 18 are delocalized and obey the. Huckel's theory of aromaticity. Phthalocyanines belong to the porphyrin family having the meso carbons of porphyrins ...

  7. Low-bandgap polymer photovoltaic cells

    NARCIS (Netherlands)

    Duren, van J.K.J.; Dhanabalan, A.; Hal, van P.A.; Janssen, R.A.J.

    2001-01-01

    A-novel low-bandgap conjugated polymer (PTPTB, Eg = ~1.6 eV), consisting of alternating electron-rich N-dodecyl-2,5-bis(2'-thienyl)pyrrole (TPT) and electron-deficient 2,1,3-benzothiadiazole (B) units, as a donor material is studied together with a soluble fullerene derivative (PCBM) as acceptor to

  8. High efficient removal of chromium (VI) using glycine doped polypyrrole adsorbent from aqueous solution

    CSIR Research Space (South Africa)

    Ballav, N

    2012-08-01

    Full Text Available Glycine doped polypyrrole (PPy-gly) adsorbent was prepared via in situ polymerization of pyrrole (Py) monomer in the presence of glycine (gly) for the removal of Cr(VI). Formation of PPy homopolymer and inclusion of gly in the PPy matrix were...

  9. Polypyrrole-coated halloysite nanotube clay nanocomposite: synthesis, characterization and Cr(VI) adsorption behaviour

    CSIR Research Space (South Africa)

    Ballav, N

    2014-12-01

    Full Text Available A polypyrrole-coated halloysite nanotube nanocomposite (PPy-HNTs NC) was prepared via in situ polymerization of pyrrole (Py) in the dispersion of HNTs and assessed for the removal of toxic Cr(VI) from aqueous solutions. ATR-FTIR and XRD results...

  10. Contribution to the electromagnetic study of conducting polymers and chiral structures

    International Nuclear Information System (INIS)

    Lafosse, Xavier

    1994-01-01

    In this work, an electromagnetic characterisation of organic absorptive materials partially made of conductive polymer is presented. Poly-pyrrole-Teflon alloys containing from 0 to 20 pc (in volume) poly-pyrrole were prepared and characterised from dc to 6 GHz. The complex permittivity shows that these materials are absorptive; the dielectric properties strongly depend on the composition and are correctly modelled by a percolation law. A dielectric relaxation was observed for the conductive alloys and this phenomenon is interpreted as the result of an electronic conduction process insured by a charged carriers hopping. A model was developed; it is in good agreement with these results. The difference between the low and high frequency behaviour is also underlined. Microwave chiral structures were manufactured. A cholesteric arrangement of uniaxial slabs was measured in transmission between 4 and 6 GHz; the experimental results are correctly modelled by cascading quadrupolar scattering matrices. New chiral materials were prepared by mixing millimetric helices made of poly-pyrrole with an insulating matrix. These materials exhibit a rotatory power and a good absorption of electromagnetic waves which is connected to the poly-pyrrole concentration. The interest in using conductive polymers to design absorptive chiral materials in the microwave domain is put in evidence and the experimental results are in good agreement with a numerical model; nevertheless, the optimisation of these materials remains difficult. (author) [fr

  11. A New Natural Lactone from Dimocarpus longan Lour. Seeds

    Directory of Open Access Journals (Sweden)

    Zhongjun Li

    2012-08-01

    Full Text Available A new natural product named longanlactone was isolated from Dimocarpus longan Lour. seeds. Its structure was determined as 3-(2-acetyl-1H-pyrrol-1-yl-5-(prop-2-yn-1-yldihydrofuran-2(3H-one by spectroscopic methods and HRESIMS.

  12. Distribution of adsorbed molecules in electronic nose sensors

    DEFF Research Database (Denmark)

    Swann, M.J.; Glidle, A.; Gadegaard, Nikolaj

    2000-01-01

    Neutron reflectivity measurements of thin films of electropolymerised poly(pyrrole) show that swelling of these insoluble polymers does occur following vapour adsorption. The variation in swelling found for different vapours is correlated with corresponding changes in polymer conductivity and mass...

  13. Gyroid nanoporous scaffold for conductive polymers

    DEFF Research Database (Denmark)

    Guo, Fengxiao; Schulte, Lars; Zhang, Weimin

    2011-01-01

    Conductive nanoporous polymers with interconnected large surface area have been prepared by depositing polypyrrole onto nanocavity walls of nanoporous 1,2-polybutadiene films with gyroid morphology. Vapor phase polymerization of pyrrole was used to generate ultrathin films and prevent pore blocking...

  14. P Phytoch the hemica leaf ex al scre xtract o eening of Enta and a ...

    African Journals Online (AJOL)

    SAM

    Antibiotic sensitivity testing. Report of. International Collaborative Study, Acct. Pathol. Microbiol. 217B: Supplementary 1-9. Geissman TA (1963). Flavonoid Compounds, tannins, ligninsand related Compounds. In: M Florkin and E.H Stotz (Ed) Pyrrol Pigments. Isoprenoid Compounds and Phenolic Plant Constituents: Vol. 9.

  15. Use of solvent to regulate the degree of polymerisation in weakly associated supramolecular oligomers

    DEFF Research Database (Denmark)

    Bähring, Steffen; Kim, D. S.; Duedal, T.

    2014-01-01

    Using a tetrathiafulvalene functionalised calix[4] pyrrole (TTF-C[4]P; 1) and alkyl diester-linked bis-dinitrophenols (2-4), it was found that the solvent polarity and linker length have an effect on the molecular aggregation behaviour. 2D H-1 NOESY, DOSY NMR and UV-vis-NIR spectroscopic studies...

  16. Technical and Associated R&D Laboratory/Project Support to AFRL/RXQL Airbase Sciences Branch

    Science.gov (United States)

    2011-10-01

    40 Figure 37. [3-(Trimethoxysilyl) propyl ]octadecyldimethylammonium Chloride (Quat) ...........44 Figure 38. 2-(3-Triethoxysilylpropyl)-5,5...82 Figure 70. Synthesis of Polypyrrole from Pyrrole by Ferric Chloride ...solubilize FS Aliquat 336 Not water miscible Quat ([3-(trimethoxysilyl) propyl ]octadecyldimethylammonium chloride ) Did not solubilize FS

  17. Pyrroloaryls and pyrroloheteroaryls: Inhibitors of the HIV fusion/attachment, reverse transcriptase and integrase

    Czech Academy of Sciences Publication Activity Database

    Patel, Rahul V.; Park, S.W.

    2015-01-01

    Roč. 23, č. 17 (2015), s. 5247-5263 ISSN 0968-0896 R&D Projects: GA MŠk(CZ) LO1204 Institutional support: RVO:61389030 Keywords : Pyrrole * Arylthiopyrrole * Triciribine Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 2.923, year: 2015

  18. 27 CFR 21.98 - Bone oil (Dipple's oil).

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bone oil (Dipple's oil....98 Bone oil (Dipple's oil). (a) Color. The color shall be a deep brown. (b) Distillation range. When... below 90 °C. (c) Pyrrol reaction. Prepare a 1.0 percent solution of bone oil in 95 percent alcohol...

  19. 40 CFR 180.513 - Chlorfenapyr; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ...)-1H-pyrrole-3-carbonitrile] in or on the following raw agricultural commodities: Commodity Parts per... only be undertaken when the facility is not in operation, and provided exposed food has been covered... assure safe use, the label and labeling shall conform to that registered by the U.S. Environmental...

  20. ROOM TEMPERATURE BULK SYNTHESIS OF SILVER NANOCABLES WRAPPED WITH POLYPYRROLE

    Science.gov (United States)

    Wet chemical synthesis of silver cables wrapped with polypyrrole is reported in aqueous media without use of any surfactant/capping agent and/or template. The method employs direct polymerization of pyrrole of an aqueous solution with AgNO3 as an oxidizing agent. The four probe c...

  1. Interplay Between Side Chain Pattern, Polymer Aggregation, and Charge Carrier Dynamics in PBDTTPD:PCBM Bulk-Heterojunction Solar Cells

    KAUST Repository

    Dyer-Smith, Clare; Howard, Ian A.; Cabanetos, Clement; El Labban, Abdulrahman; Beaujuge, Pierre; Laquai, Fré dé ric

    2015-01-01

    Poly(benzo[1,2-b:4,5-b′]dithiophene–alt–thieno[3,4-c]pyrrole-4,6-dione) (PBDTTPD) polymer donors with linear side-chains yield bulk-heterojunction (BHJ) solar cell power conversion efficiencies (PCEs) of about 4% with phenyl-C71-butyric acid methyl

  2. Fulltext PDF

    Indian Academy of Sciences (India)

    2018-03-30

    Mar 30, 2018 ... Our theoretical studies provide that judiciously designed BODIPY core-derived dyes show certain unique spectroscopic and electronic .... The vinyl pyrrole moiety as a π-bridge is intro- ... as a simple test of the electronic properties around the fun- ..... quence, it is expected that to have a longer life span, the.

  3. Enzyme mediated synthesis of polypyrrole in the presence of chondroitin sulfate and redox mediators of natural origin

    Energy Technology Data Exchange (ETDEWEB)

    Grijalva-Bustamante, G.A. [Departamento de Investigación en Polímeros y Materiales, Universidad de Sonora, CP 83000 Hermosillo, Sonora (Mexico); Evans-Villegas, A.G. [Departamento de Ciencias Químico Biológicas, Universidad de Sonora, CP 83000 Hermosillo, Sonora (Mexico); Castillo-Castro, T. del, E-mail: terecat@polimeros.uson.mx [Departamento de Investigación en Polímeros y Materiales, Universidad de Sonora, CP 83000 Hermosillo, Sonora (Mexico); Castillo-Ortega, M.M. [Departamento de Investigación en Polímeros y Materiales, Universidad de Sonora, CP 83000 Hermosillo, Sonora (Mexico); Cruz-Silva, R. [Research Center for Exotic Nanocarbons, Shinshu University, 4-17-1 Wakasato, 380-8553, Nagano (Japan); Huerta, F. [Departamento Ingeniería Textil y Papelera, Universitat Politecnica de Valencia, Plaza Ferrandiz y Carbonell, 1, E-03801 Alcoy (Spain); Morallón, E. [Departamento Química Física e Instituto Universitario de Materiales, Universidad de Alicante, Ap. 99, E-03080 Alicante (Spain)

    2016-06-01

    Polypyrrole (PPy) was synthesized by enzyme mediated oxidation of pyrrole using naturally occurring compounds as redox mediators. The catalytic mechanism is an enzymatic cascade reaction in which hydrogen peroxide is the oxidizer and soybean peroxidase, in the presence of acetosyringone, syringaldehyde or vanillin, acts as a natural catalysts. The effect of the initial reaction composition on the polymerization yield and electrical conductivity of PPy was analyzed. Morphology of the PPy particles was studied by scanning electron microscopy and transmission electron microscopy whereas the chemical structure was studied by X-ray photoelectron and Fourier transformed infrared spectroscopic techniques. The redox mediators increased the polymerization yield without a significant modification of the electronic structure of PPy. The highest conductivity of PPy was reached when chondroitin sulfate was used simultaneously as dopant and template during pyrrole polymerization. Electroactive properties of PPy obtained from natural precursors were successfully used in the amperometric quantification of uric acid concentrations. PPy increases the amperometric sensitivity of carbon nanotube screen-printed electrodes toward uric acid detection. - Highlights: • A new method of pyrrole polymerization using naturally occurring redox mediators and doping agents was studied. • The catalytic efficiency of different redox mediators toward pyrrole oxidation was evaluated. • Two different naturally occurring polymers were studied as bifunctional steric stabilizer/doping agents. • Polypyrrole improves the amperometric response of carbon nanotube screen printed electrodes toward uric acid sensing.

  4. Polypyrrole: FeOx·ZnO nanoparticle solar cells with breakthrough open-circuit voltage prepared from relatively stable liquid dispersions

    KAUST Repository

    Zong, Baoyu; Ho, Pin; Zhang, Zhiguo; Ng, Gingmeng; Yao, Kui; Guo, Zaibing

    2014-01-01

    in open air from relatively stable liquid dark-color polypyrrole-based dispersions, which were synthesized using appropriate surfactants during the in situ polymerization of pyrrole with FeCl3 or both H2O2 and FeCl3 as the oxidizers. The performance

  5. An efficient solvent-free synthesis of meso-substituted dipyrromethanes using SnCl2•2H2O catalysis

    Directory of Open Access Journals (Sweden)

    Kabeer Ahmed Shaikh

    2012-07-01

    Full Text Available Highly rapid and simple methodology has been developed for the quantitative synthesis of meso-substituted dipyrromethanes from lowest pyrrole/aldehyde ratio. The method was carried out by using SnCl2•2H2O as a catalyst under solvent free condition. The method is environmentally friendly, easy to workup, and gives excellent yield of the products.

  6. Synthesis and in vitro antimicrobial evaluation of 5-amino-7-aryl-6 ...

    African Journals Online (AJOL)

    pyrrole derivatives from the reaction of 3-hydroxypyrrole, malononitrile, and various aromatic aldehydes using ZrOCl2·8H2O, an environmentally friendly catalyst under a thermal solvent-free green procedure is described. This simple protocol ...

  7. Sanjeev Pran Mahanta

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences. Sanjeev Pran Mahanta. Articles written in Journal of Chemical Sciences. Volume 123 Issue 5 September 2011 pp 593-599. Interesting reactivity of diketones with pyrrole under acidic condition · Sanjeev Pran Mahanta Pradeepta Kumar Panda · More Details Abstract Fulltext ...

  8. Fulltext PDF

    Indian Academy of Sciences (India)

    Administrator

    pyrrole (2-Th-Py) to investigate the quantum absorbance efficiency at this inorganic/organic interface (IOI). Our study shows ... the organic monomer such as ionization potential (IP), electron affinity (EA) and energy bandgap (Eg), and the barrier height at ... 1000A was used to produce scanning electron micro- graphs of the ...

  9. Untitled

    African Journals Online (AJOL)

    degradation of polyanine at positive potentials (ca 0.70 V) vs SCE in the absence of aniline monomer is totally suppressed when the electrochemical process is carried in sodium chloride solution and acetic acid-sodium acetate mixture. INTRODUCTION. Research on conducting polymers i.e., poly-(aniline, pyrrole, ...

  10. Journal of Chemical Sciences | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 117; Issue 2. Rhodium and iridium complexes of N-(2'-hydroxyphenyl)pyrrole-2-aldimine: Synthesis, structure, and spectral and electrochemical properties. Semanti Basu Indrani Pal Ray J Butcher Georgina Rosair Samaresh Bhattacharya. Volume 117 Issue 2 March ...

  11. Chemically designed Pt/PPy nano-composite for effective LPG gas sensor.

    Science.gov (United States)

    Gaikwad, Namrata; Bhanoth, Sreenu; More, Priyesh V; Jain, G H; Khanna, P K

    2014-03-07

    Simultaneous in situ reduction of hexachloroplatinic acid by the amine group in the pyrrole monomer and oxidation of pyrrole to form polypyrrole (PPy) was examined. The reactions were performed at various temperatures to understand the degree of reduction of platinum precursor as well as doping of polypyrrole with Pt(II) chloro-complex. Spectroscopic images revealed different morphologies for the Pt/PPy nano-composite prepared at various temperatures. The as-prepared Pt/PPy nano-composite samples were tested for their ability to sense liquefied petroleum gas (LPG) which resulted in excellent sensing at relatively low temperature. The porous nature and ohmic contact between the PPy and platinum nanoparticles makes the as-prepared Pt/PPy nano-composite highly useful for sensors as well as electronic applications.

  12. Synthesis and photovoltaic properties from inverted geometry cells and roll-to-roll coated large area cells from dithienopyrrole-based donor-acceptor polymers

    DEFF Research Database (Denmark)

    Yue, Wei; Larsen-Olsen, Thue Trofod; Hu, Xiaolian

    2013-01-01

    A series of donor-acceptor low band gap polymers composed of alternating dithienopyrrole or its derivative as donors and phthalimide or thieno[3,4-c]pyrrole-4,6-dione as acceptors (P1-P4) are synthesized by Stille coupling polymerization. All polymers show strong absorption in the visible region......, for P2 and P4 possessing thieno[3,4-c]pyrrole-4,6-dione as an acceptor, their film absorption covers the region of 500-800 nm and 500-750 nm respectively, which makes them attractive as low band gap polymer solar cell (PSC) materials. With the incorporation of thiophene bridges, P3 and P4 have 0...

  13. Electromagnetic properties of conducting polymers encapsulated in an insulating matrix

    International Nuclear Information System (INIS)

    Esnouf, Stephane

    1995-01-01

    The aim of this work is to study the electronic properties of conducting polymers encapsulated in zeolite. We studied two kinds of polymers: intrinsic conducting polymers (poly-pyrrole) and pyrolyzed polymers (polyacrylonitrile and poly-furfuryl alcohol). These systems were characterized by electron paramagnetic resonance and microwave conductivity measurements. In the first part, we present the preparation and the characterization of encapsulated poly-pyrrole. Conductivity measurements show that the encapsulated material is insulating, certainly because a strong interaction with the zeolite traps the charge carriers. In the second part, we focus on pyrolyzed encapsulated polyacrylonitrile. This system has a metal-like susceptibility at room temperature and a relatively high microwave conductivity. These results demonstrate the formation during the pyrolysis of extended aromatic clusters. Finally, we study pyrolyzed encapsulated poly-furfuryl alcohol. We show that the only effect of the pyrolysis is to fragment the polymers. We also discuss the spin relaxation and the EPR line broadening. (author) [fr

  14. Methyl (9aR*,10S*,11R*,13aS*,13bS*-9-oxo-6,7,9,9a,10,11-hexahydro-5H,13bH-11,13a-epoxypyrrolo[2′,1′:3,4][1,4]diazepino[2,1-a]isoindole-10-carboxylate

    Directory of Open Access Journals (Sweden)

    Flavien A. A. Toze

    2011-11-01

    Full Text Available The title compound, C17H18N2O4, is the methyl ester of the adduct of intramolecular Diels–Alder reaction between maleic anhydride and 1-(2-furyl-2,3,4,5-tetrahydro-1H-pyrrolo[1,2-a][1,4]diazepine. The molecule comprises a fused pentacyclic system containing four five-membered rings (viz. pyrrole, 2-pyrrolidinone, tetrahydrofuran and dihydrofuran and one seven-membered ring (1,4-diazepane. The pyrrole ring is approximately planar (r.m.s. deviation = 0.003 Å while the 2-pyrrolidinone, tetrahydrofuran and dihydrofuran five-membered rings have the usual envelope conformations. The central seven-membered diazepane ring adopts a boat conformation. In the crystal, molecules are bound by weak intermolecular C—H...O hydrogen-bonding interactions into zigzag chains propagating in [010]. In the crystal packing, the chains are stacked along the a axis.

  15. A facile method to synthesize polypyrrole nanoparticles in the presence of natural organic phosphate

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Chao; Mo, Haodao [State Key Laboratory Breeding Base of Nonferrous Metals and Specific Materials Processing, College of Material Science and Engineering, Guilin University of Technology, Guilin 541004 (China); Zang, Limin, E-mail: D14S004@akita-pu.ac.jp [Department of Machine Intelligence and Systems Engineering, Faculty of Systems Engineering, Akita Prefectural University, Yurihonjo City, Akita 015-0055 (Japan); Qiu, Jianhui; Sakai, Eiichi; Wu, Xueli [Department of Machine Intelligence and Systems Engineering, Faculty of Systems Engineering, Akita Prefectural University, Yurihonjo City, Akita 015-0055 (Japan)

    2014-09-15

    The conductive polymers with unique nanostructures have attracted intense interest due to their potential application. Here the well-defined polypyrrole nanoparticles were facile fabricated via the facile chemical oxidative polymerization of pyrrole with high feeding ratio of phytic acid. Phytic acid is a renewable resource and a natural carbohydrate compound with a vast number of phosphate groups from plant which was used as the template and dopant for the nanostructured conductive polymer for the first time. The samples exhibit the well-defined nanoparticles observed by scanning electron microscope (SEM) and atomic force microscope (AFM). The PPy nanoparticles were achieved and outstanding electrical conductivity as high as 5263 S m{sup −1} was obtained with the feeding mass ratio of phytic acid: pyrrole=3:7. Furthermore, the polypyrrole nanoparticles were characterized with Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), and electrical conductivity techniques.

  16. Preparation of biosensors by immobilization of polyphenol oxidase in conducting copolymers and their use in determination of phenolic compounds in red wine.

    Science.gov (United States)

    Böyükbayram, A Elif; Kiralp, Senem; Toppare, Levent; Yağci, Yusuf

    2006-10-01

    Electrochemically produced graft copolymers of thiophene capped polytetrahydofuran (TPTHF1 and TPTHF2) and pyrrole were achieved by constant potential electrolysis using sodium dodecylsulfate (SDS) as the supporting electrolyte. Characterizations were based on Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Electrical conductivities were measured by the four-probe technique. Novel biosensors for phenolic compounds were constructed by immobilizing polyphenol oxidase (PPO) into conducting copolymers prepared by electropolymerization of pyrrole with thiophene capped polytetrahydrofuran. Kinetic parameters, maximum reaction rate (V(max)) and Michaelis-Menten constant (K(m)) and optimum conditions regarding temperature and pH were determined for the immobilized enzyme. Operational stability and shelf-life of the enzyme electrodes were investigated. Enzyme electrodes of polyphenol oxidase were used to determine the amount of phenolic compounds in two brands of Turkish red wines and found very useful owing to their high kinetic parameters and wide pH working range.

  17. Corrosion properties of the Mg alloy coated with polypyrrole films

    International Nuclear Information System (INIS)

    Grubač, Zoran; Rončević, Ivana Škugor; Metikoš-Huković, Mirjana

    2016-01-01

    Highlights: • Electropolymerization of pyrrole on Mg-alloy surface in presence of salicylate. • Salicylate dual role in PPy deposition: passivation and electron transfer mediation. • Redox potential of salicylate corresponds to potential of PPy nucleation. • EIS and polarization corrosion studies of PPy coated Mg-alloy in Hanks’ solution. • Polypyrrole significantly slowdown Mg alloy corrosion in Hanks’ solution. - Abstract: In the present study the reactive surface of Mg alloy was coated with the nontoxic biocompatible polypyrrole (PPy) film synthesized by electrochemical oxidation from an aqueous salicylate solution. Salicylate ions prevent Mg dissolution and act as an electron transfer mediator during the PPy film nucleation, formation and growth on the alloy surface. Kinetics of the pyrrole polymerization as well as corrosion resistance of the PPy coated Mg alloy in the Hanks’ solution were investigated using dc electrochemical methods and electrochemical impedance spectroscopy (EIS). Characterization of the surface film was performed by optical and Fourier transform infrared spectroscopy (FTIR).

  18. Synthesis of Hollow Conductive Polypyrrole Balls by the Functionalized Polystyrene as Template

    Directory of Open Access Journals (Sweden)

    Choo Hwan Chang

    2010-01-01

    Full Text Available We report the preparation of hollow spherical polypyrrole balls (HSPBs by two different approaches. In the first approach, core-shell conductive balls, CSCBs, were prepared with poly(styrene as core and polypyrrole (PPy as shell by in situ polymerization of pyrrole in the presence of polystyrene (PS latex particles. In the other approach, CSCBs were obtained by in situ copolymerization of pyrrole in the presence of PS(F with hydrophilic groups like anhydride, boronic acid, carboxylic acid, or sulfonic acid, and then HSPBs were obtained by the removal of PS or PS(F core from CSCBs. TEM images reveal the spherical morphology for HSPBs prepared from PS(F. The conductivity of CSCBs and HSPBs was in the range of 0.20–0.90 S/cm2.

  19. Immunosuppressive compounds from a deep water marine sponge, Agelas flabelliformis.

    Science.gov (United States)

    Gunasekera, S P; Cranick, S; Longley, R E

    1989-01-01

    Two immunosuppressive compounds, 4 alpha-methyl-5 alpha-cholest-8-en-3 beta-ol and 4,5-dibromo-2-pyrrolic acid were isolated from a deep water marine sponge, Agelas flabelliformis. Their structures were determined by comparison of their spectral data with those of samples isolated from other organisms. Both compounds were highly active in suppression of the response of murine splenocytes in the two-way mixed lymphocyte reaction (MLR) with little to no demonstrable cytotoxicity at lower doses. In addition, 4,5-dibromo-2-pyrrolic acid suppressed the proliferative response of splenocytes to suboptimal concentrations of the mitogen, concanavalin A (Con A). These results describe for the first time compounds isolated from the marine sponge A. flabelliformis that possess potent in vitro immunosuppressive activity.

  20. Control of work function of graphene by plasma assisted nitrogen doping

    International Nuclear Information System (INIS)

    Akada, Keishi; Terasawa, Tomo-o; Imamura, Gaku; Obata, Seiji; Saiki, Koichiro

    2014-01-01

    Nitrogen doping is expected to provide several intriguing properties to graphene. Nitrogen plasma treatment to defect-free and defective highly oriented pyrolytic graphite (HOPG) samples causes doping of nitrogen atom into the graphene layer. Nitrogen atoms are initially doped at a graphitic site (inside the graphene) for the defect-free HOPG, while doping to a pyridinic or a pyrrolic site (edge of the graphene) is dominant for the defective HOPG. The work function of graphene correlates strongly with the site and amount of doped nitrogen. Nitrogen atoms doped at a graphitic site lower the work function, while nitrogen atoms at a pyridinic or a pyrrolic site increase the work function. Control of plasma treatment time and the amount of initial defect could change the work function of graphite from 4.3 eV to 5.4 eV, which would open a way to tailor the nature of graphene for various industrial applications

  1. N-aryl pyrrolo-tetrathiafulvalene based ligands: synthesis and metal coordination.

    Science.gov (United States)

    Balandier, Jean-Yves; Chas, Marcos; Dron, Paul I; Goeb, Sébastien; Canevet, David; Belyasmine, Ahmed; Allain, Magali; Sallé, Marc

    2010-03-05

    A straightforward general synthetic access to N-aryl-1,3-dithiolo[4,5-c]pyrrole-2-thione derivatives 6 from acetylenedicarbaldehyde monoacetal is depicted. In addition to their potentiality as precursors to dithioalkyl-pyrrole derivatives, thiones 6 are key building blocks to N-aryl monopyrrolo-tetrathiafulvalene (MPTTF) derivatives 10. X-ray structures of four of these thiones intermediates, reminiscent of the corresponding MPTTF derivatives, are provided. When the aryl group is a binding pyridyl unit, the MPTTF derivative 10a can coordinate M(II) salts (M = Pt, Pd). The first examples of metal-directed orthogonal MPTTF-based dimers 11-14, obtained through coordination of 10a to cis-blocked square planar Pt or Pd complexes are described. Studies on the parameters influencing the dimer construction are presented, as well as first recognition properties of the resulting electron-rich clip for C(60).

  2. Epibisdehydroneotuberostemonine J

    Directory of Open Access Journals (Sweden)

    Lu Jin

    2013-09-01

    Full Text Available The title compound, C22H29NO4, a stemona alkaloid, is composed of two lactone rings (A and E, a six-membered ring (B, a pyrrole ring (C and a seven-membered ring (D. The five-membered rings A and E exhibit envelope conformations (C atoms as flaps while ring C is planar. Ring B exhibits a twist-chair conformation due to fusion with pyrrole ring C while ring D adopts a chair conformation. The junction between rings A and B is cis. In the crystal, weak C—H...O interactions involving the two carbonyl groups, a methylene and a methyl group give rise to a three-dimensional network.

  3. The Comparative Study on Vapor-Polymerization and Pressure-dependent Conductance Behavior in Polypyrrole-hybridized Membranes

    Energy Technology Data Exchange (ETDEWEB)

    Hanif, Zahid; Lee, Seyeong; Arsalani, Nasir; Geckeler, Kurt E.; Hong, Sukwon; Yoon, Myung-Han [Gwangju Institute of Science and Technology, Gwangju (Korea, Republic of)

    2016-02-15

    In this study, commercially available cellulose membranes were hybridized with conjugated polymer via vapor-phase polymerization using pyrrole and iron chloride as a monomer and oxidant, respectively. The iron (III) chloride layer dip-coated on the hydrophilic cell ulose surface oxidized the vaporized pyrrole monomer leading to the polypyrrole-cellulose hybrid membrane. The conductivity of hybrid membrane was optimized by varying the oxidant concentration and the monomer vapor exposure time. The various surface characterizations of polypyrrole-cellulose hybrid membrane show that the conductive polypyrrole layer was uniformly deposited onto the surface of cellulose fibrous networks unlike the polypyrrole-nylonhybrid membrane prepared in the similar way. The polypyrrole-incorporated cellulose networks exhibits steeper electrical conductance increase over the vertical pressure than its nylon counterpart. Our result suggests that the polypyrrole-cellulose hybrid membrane can be applicable for a disposable high-load pressure sensor.

  4. Size-controllable polypyrrole nanospheres synthesized in the presence of phosphorylated chitosan and their size effect in different applications

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jing; Cao, Yi; Lu, Yun, E-mail: yunlu@nju.edu.cn [Nanjing University, Department of Polymer Science and Engineering, State Key Laboratory of Coordination Chemistry, Key Laboratory of High Performance Polymer Materials and Technology of Ministry of Education, School of Chemistry and Chemical Engineering (China)

    2015-05-15

    The size-controllable polypyrrole (PPy) nanospheres are successfully synthesized by oxidative polymerization of pyrrole using N-methylene phosphonic chitosan (NMPC) as a structure-directing agent. By simply changing the amount of NMPC, the size of the PPy nanospheres can be adjusted from 190 to 50 nm in diameter. The spectrometric results suggest that the electrostatic interactions of phosphate groups in NMPC molecule with pyrrole ring might be a driving force for formation of the uniform and size-controllable PPy nanospheres. The PPy nanospheres with the diameter of 100 nm exhibit the largest capacity and a good cycling stability as electrode materials of supercapacitors. The as-prepared PPy nanospheres also can be combined with carbon dots to form composite nanospheres presenting enhanced fluorescence intensity, which show potential application in fluorescence detection.

  5. Changes of the electronic structure of the atoms of nitrogen in nitrogen-doped multiwalled carbon nanotubes under the influence of pulsed ion radiation

    Energy Technology Data Exchange (ETDEWEB)

    Korusenko, P.M., E-mail: korusenko@obisp.oscsbras.ru [Omsk Scientific Centre, Siberian Branch, Russian Academy of Sciences, Karl Marx Avenue, 15, Omsk 644024 (Russian Federation); Bolotov, V.V.; Nesov, S.N.; Povoroznyuk, S.N. [Omsk Scientific Centre, Siberian Branch, Russian Academy of Sciences, Karl Marx Avenue, 15, Omsk 644024 (Russian Federation); Khailov, I.P. [Tomsk Polytechnic University, Lenin Ave. 2a, Tomsk 634028 (Russian Federation)

    2015-09-01

    With the use of X-ray photoelectron spectroscopy (XPS) there have been investigated the changes of the chemical state of nitrogen atoms in the structure of nitrogen-doped multiwalled carbon nanotubes (CN{sub x}-MWCNTs) resulting from the impact of pulsed ion beam at various parameters of the beam (energy density, number of pulses). It has been established that irradiation with the pulsed ion beam leads to a reduction of the total amount of nitrogen in CN{sub x} nanotubes. It has been shown that a single pulse irradiation of ion beam at the energy densities of 0.5, 1, 1.5 J/cm{sup 2} leads to restructuring of the nitrogen from pyridinic and pyrrolic configuration to graphitic state. Complete removal of nitrogen (pyridinic, pyrrolic, graphitic) embedded in the structure of the walls of CN{sub x} nanotubes occurs at ten pulses and 1.5 J/cm{sup 2}.

  6. Abiotic synthesis of porphyrins and other oligopyrroles on the early Earth and Earth-like planets

    Science.gov (United States)

    Fox, S.; Strasdeit, H.

    2013-09-01

    It is generally accepted that abiotically formed amino acids existed on Earth in the late Hadean and early Archean (four billion years ago). They were mainly dissolved in a salty primordial ocean. At that time, volcanic islands were much more abundant than today. It is therefore reasonable to assume that, at hot volcanic coasts, amino acids could have been thermally transformed into other organic molecules. Based on this scenario, we conducted laboratory experiments that simulated the interaction between amino acid-containing sea water and hot lava. In these experiments, a large number of different volatile products were formed, among them pyrroles. It was also possible to obtain porphyrins and other oligopyrroles from pyrroles under simulated conditions of primordial volcanic islands. All experiments were conducted under plausible prebiotic conditions. Our results reveal an abiotic pathway to possible precursors of oligopyrrole-type biomolecules, such as heme and chlorophylls.

  7. Synthesis of Pt-Ru PSB-Py catalysis by {gamma}-irradiation and their electrocatalytic efficiency for methanol oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Jung Ah; Sim, Kwang Sik; Choi, Seong Ho [Hannam University, Daejeon (Korea, Republic of); Jung, Sung Hee [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2009-09-15

    We report here that deposition of Pt-Ru catalysis on the surface of core-shell conductive balls by radiation-chemical reduction of Pt and Ru ions, in order to use as catalysis in a fuel cell. The poly(styrene-co-4-vinylphenylboronic acid)-pyrrole (PSB-Py) with core-shell structure was obtained by in situ polymerization of pyrrole in the presence of the poly(styrene-co-4-vinylphenylboronic acid) (PSB). Subsequently, Pt-Ru catalysis were deposited onto PSB-Py ball by {gamma}-irradiation, in the presence/absence of poly(vinypyrolidone) (PVP) to prepare electrocatalysis for a fuel cell. The catalytic efficiency of Pt-Ru PSB-Py catalyst was examined for carbon monoxide (CO) stripping and methanol oxidation.

  8. Synthesis of Pt-Ru PSB-Py catalysis by γ-irradiation and their electrocatalytic efficiency for methanol oxidation

    International Nuclear Information System (INIS)

    Yoon, Jung Ah; Sim, Kwang Sik; Choi, Seong Ho; Jung, Sung Hee

    2009-01-01

    We report here that deposition of Pt-Ru catalysis on the surface of core-shell conductive balls by radiation-chemical reduction of Pt and Ru ions, in order to use as catalysis in a fuel cell. The poly(styrene-co-4-vinylphenylboronic acid)-pyrrole (PSB-Py) with core-shell structure was obtained by in situ polymerization of pyrrole in the presence of the poly(styrene-co-4-vinylphenylboronic acid) (PSB). Subsequently, Pt-Ru catalysis were deposited onto PSB-Py ball by γ-irradiation, in the presence/absence of poly(vinypyrolidone) (PVP) to prepare electrocatalysis for a fuel cell. The catalytic efficiency of Pt-Ru PSB-Py catalyst was examined for carbon monoxide (CO) stripping and methanol oxidation

  9. Anionic chromogenic chemosensors highly selective for fluoride or cyanide based on 4-(4-Nitrobenzylideneamine)phenol

    International Nuclear Information System (INIS)

    Nicoleti, Celso R.; Marini, Vanderleia G.; Zimmermann, Lizandra M.; Machado, Vanderlei G.

    2012-01-01

    4-(4-Nitrobenzylideneamine)phenol was used in two strategies allowing the highly selective detection of F - and CN - . Firstly, the compound in acetonitrile acts as a chromogenic chemosensor based on the idea that more basic anions cause its deprotonation (colorless solution), generating a colored solution containing phenolate. The discrimination of CN - over F - was obtained by adding 1.4% water to acetonitrile: water preferentially solvates F - , leaving the CN - free to deprotonate the compound. Another strategy involved an assay comprised of the competition between phenolate dye and the analyte for calyx[4]pyrrole in acetonitrile, a receptor highly selective for F - . Phenolate and calyx[4]pyrrole form a hydrogen-bonded complex, which changes the color of the medium. On the addition of various anions, only F - was able to restore the original color corresponding to phenolate in solution due to the fact that the anion dislodges phenolate from the complexation site. (author)

  10. Preparation of polymer composite nanomembranes with a conductivity asymmetry

    International Nuclear Information System (INIS)

    Kravets, L.I.; Dmitriev, S.N.; Satulu, B.; Mitu, B.; Dinescu, G.

    2009-01-01

    The structure and charge transport properties of the poly(ethylene terephthalate) track membrane modified by a pyrrole plasma have been studied. It was found that polymer deposition on the surface of a track membrane via the plasma polymerization of pyrrole results in the creation of a composite nanomembrane that, in the case of the formation of a semipermeable layer covering the pores, possesses conductivity asymmetry in electrolyte solutions - a rectification effect similar to that of a p-n junction in semiconductors. It is caused by presence in the membrane of two layers with different functional groups and also by the pore geometry. Such a type of membranes can be used for creation of chemical and biochemical sensors

  11. Amination of activated carbon for enhancing phenol adsorption: Effect of nitrogen-containing functional groups

    International Nuclear Information System (INIS)

    Yang, Guo; Chen, Honglin; Qin, Hangdao; Feng, Yujun

    2014-01-01

    To study the contribution of different nitrogen-containing functional groups to enhancement of phenol adsorption, the aminated activated carbons (AC) were characterized by N2 adsorption/desorption, XPS, Boehm titration, and pH drift method and tested for adsorption behaviors of phenol. Adsorption isotherm fitting revealed that the Langmuir model was preferred for the aminated ACs. The adsorption capacity per unit surface area (q m /SSA BET ) was linearly correlated with the amount of pyridinic and pyrrolic N, which suggested that these two functional groups played a critical role in phenol adsorption. The enhancement of adsorption capacity was attributed to the strengthened π–π dispersion between phenol and basal plane of AC by pyridinic, pyrrolic N. The adsorption kinetics was found to follow the pseudo-second-order kinetic model, and intraparticle diffusion was one of the rate-controlling steps in the adsorption process.

  12. The Comparative Study on Vapor-Polymerization and Pressure-dependent Conductance Behavior in Polypyrrole-hybridized Membranes

    International Nuclear Information System (INIS)

    Hanif, Zahid; Lee, Seyeong; Arsalani, Nasir; Geckeler, Kurt E.; Hong, Sukwon; Yoon, Myung-Han

    2016-01-01

    In this study, commercially available cellulose membranes were hybridized with conjugated polymer via vapor-phase polymerization using pyrrole and iron chloride as a monomer and oxidant, respectively. The iron (III) chloride layer dip-coated on the hydrophilic cell ulose surface oxidized the vaporized pyrrole monomer leading to the polypyrrole-cellulose hybrid membrane. The conductivity of hybrid membrane was optimized by varying the oxidant concentration and the monomer vapor exposure time. The various surface characterizations of polypyrrole-cellulose hybrid membrane show that the conductive polypyrrole layer was uniformly deposited onto the surface of cellulose fibrous networks unlike the polypyrrole-nylonhybrid membrane prepared in the similar way. The polypyrrole-incorporated cellulose networks exhibits steeper electrical conductance increase over the vertical pressure than its nylon counterpart. Our result suggests that the polypyrrole-cellulose hybrid membrane can be applicable for a disposable high-load pressure sensor.

  13. Ethyl 1-oxo-1,2,3,4-tetrahydro-9H-carbazole-3-carboxylate

    Directory of Open Access Journals (Sweden)

    Tuncer Hökelek

    2009-07-01

    Full Text Available The title compound, C15H15NO3, contains a carbazole skeleton with an ethoxycarbonyl group at the 3 position. In the indole ring system, the benzene and pyrrole rings are nearly coplanar, forming a dihedral angle of 1.95 (8°. The cyclohexenone ring has an envelope conformation. In the crystal structure, pairs of strong N—H...O hydrogen bonds link the molecules into centrosymmetric dimers with R22(10 ring motifs. π–π contacts between parallel pyrrole rings [centroid–centroid distance = 3.776 (2 Å] may further stabilize the structure. A weak C—H...π interaction is also observed.

  14. 2?Diazo?1?phenyl?2?((trifluoromethyl)sulfonyl)ethan?1?one: Another Utility for Electrophilic Trifluoromethylthiolation Reactions

    OpenAIRE

    Huang, Zhongyan; Okuyama, Kenta; Wang, Chen; Tokunaga, Etsuko; Li, Xiaorui; Shibata, Norio

    2016-01-01

    Abstract 2?Diazo?1?phenyl?2?((trifluoromethyl)sulfonyl)ethan?1?one (diazo?triflone) (2) is not only a building block but also a reagent. In this study, diazo?triflone, which was originally used for the synthesis of ??lactam triflones as a trifluoromethanesulfonyl (SO2CF3) building block under catalyst?free thermal conditions, is redisclosed as an effective electrophilic trifluoromethylthiolation reagent under copper catalysis. A broad set of enamines, indoles, ??keto esters, pyrroles, and ani...

  15. Novel Electrochemical Synthesis of Polypyrrole/Ag Nanocomposite and Its Electrocatalytic Performance towards Hydrogen Peroxide Reduction

    OpenAIRE

    Ruma Gupta; Kavitha Jayachandran; J. S. Gamare; B. Rajeshwari; Santosh K. Gupta; J. V. Kamat

    2015-01-01

    A simple electrochemical method of synthesis of polypyrrole/silver (PPy/Ag) nanocomposite is presented. The method is based on potentiodynamic polymerization of pyrrole followed by electrodeposition of silver employing a single potentiostatic pulse. The synthesized PPy film has embedded Ag nanocubes. The morphology and structure of the resulting nanocomposite were characterized by field emission scanning electron microscopy and X-ray diffraction. Electron paramagnetic resonance studies showed...

  16. Polypyrrole-silver Nanocomposite: Synthesis and Characterization

    OpenAIRE

    D. M. Nerkar; S. V. Panse; S. P. Patil; S. E. Jaware; G. G. Padhye

    2016-01-01

    Polypyrrole-Silver (PPy-Ag) nanocomposite has been successfully synthesized by the chemical oxidative polymerization of pyrrole with iron (III) chloride as an oxidant, in the presence of a colloidal suspension of silver nanoparticles. Turkevich method (Citrate reduction method) was used for the synthesis of silver nanoparticles (Ag NPs). The silver nanoparticles were characterized by UV-Visible spectroscopy which showed an absorption band at 423 nm confirming the formation of nanoparticles. P...

  17. Shape-controlled synthesis of polypyrrole/Ag nanostructures in the presence of chitosan.

    Science.gov (United States)

    Feng, Xiaomiao; Huang, Haiping; Xu, Lin; Zhu, Jun-Jie; Hou, Wenhua

    2008-01-01

    Polypyrrole (PPy)-coated Ag nanoparticles and nanowires were fabricated through the redox reaction between pyrrole monomer and silver nitrate in the presence of chitosan. The morphologies, compositions, and electrochemical activities of PPy/Ag composites were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, thermogravimetric analysis, Fourier transform infrared spectroscopy, and Cyclic voltammetry. The synthetic route employed here is simple and inexpensive and can be extended to prepare other conducting polymer/inorganic nanocomposites.

  18. Trapping of microwave radiation in hollow polypyrrole microsphere through enhanced internal reflection: A novel approach

    OpenAIRE

    Ritwik Panigrahi; Suneel K. Srivastava

    2015-01-01

    In present work, spherical core (polystyrene, PS)/shell (polypyrrole, PPy) has been synthesized via in situ chemical oxidative copolymerization of pyrrole (Py) on the surface of sulfonated PS microsphere followed by the formation of hollow polypyrrole (HPPy) shell by dissolving PS inner core in THF. Thereafter, we first time established that such fabricated novel art of morphology acts as a conducting trap in absorbing electromagnetic (EM) wave by internal reflection. Further studies have bee...

  19. Visible-light-promoted redox neutral C-H amidation of heteroarenes with hydroxylamine derivatives.

    Science.gov (United States)

    Qin, Qixue; Yu, Shouyun

    2014-07-03

    A room temperature redox neutral direct C-H amidation of heteroarenes has been achieved. Hydroxylamine derivatives, which are easily accessed, have been employed as tunable nitrogen sources. These reactions were enabled by a visible-light-promoted single-electron transfer pathway without a directing group. A variety of heteroarenes, such as indoles, pyrroles, and furans, could go through this amidation with high yields (up to 98%). These reactions are highly regioselective, and all the products were isolated as a single regioisomer.

  20. Polypyrrole electrodeposited on copper from an aqueous phosphate solution: Corrosion protection properties

    OpenAIRE

    Redondo, Clara; Breslin, Carmel B.

    2007-01-01

    Highly adherent and homogenous polypyrrole films were electrodeposited at copper from a dihydrogen phosphate solution. The polypyrrole films were electrosynthesized in the overoxidized state by cycling the copper electrode from –0.4 to 1.8 V (SCE) in a pyrrole-containing phosphate solution. The growth of the polypyrrole films was facilitated by the initial oxidation of the copper electrode in the phosphate solution to generate a mixed copper–phosphate, copper oxide or hydroxide layer. This la...

  1. NiCrxFe2− xO4 ferrite nanoparticles and their composites with ...

    Indian Academy of Sciences (India)

    Half of the samples have been sintered at 620°C and the other at 1175°C. Then polypyrrole (PPy)–NiCrFe2-O4 composites have been synthesized by polymerization of pyrrole monomer in the presence of NiCrFe2-O4 nanoparticles. The structure, morphology and magnetic properties of the samples have been ...

  2. The total synthesis of calcium atorvastatin.

    Science.gov (United States)

    Dias, Luiz C; Vieira, Adriano S; Barreiro, Eliezer J

    2016-02-21

    A practical and convergent asymmetric route to calcium atorvastatin (1) is reported. The synthesis of calcium atorvastatin (1) was performed using the remote 1,5-anti asymmetric induction in the boron-mediated aldol reaction of β-alkoxy methylketone (4) with pyrrolic aldehyde (3) as a key step. Calcium atorvastatin was obtained from aldehyde (3) after 6 steps, with a 41% overall yield.

  3. Thin, Conductive, Pyrrolyc film production for radioactive sources backings

    International Nuclear Information System (INIS)

    Rodriguez, L.; Arcos, J.M. los

    1993-01-01

    A procedure for electro polymerization of pyrrole has been set up in order to produce thin, (> 15 μg/cm2) homogeneous (thickness variation < 2%) films, with no need for additional metallization to be used as backings of radioactive sources, having 10-0,4 Kfl/sample, for 35-70 μg/cm . The experimental equipment, reagent and procedure utilized is described as well as the characterization of Pyrrolyc films produced. (Author) 28 refs

  4. Thin, Conductive, Pyrrolyc film production for radioactive sources backings; Preparacion de peliculas pirrolicas conductoras ultrafinas para soporte de fuentes radiactivas

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez, L; Arcos, J.M. los

    1993-07-01

    A procedure for electro polymerization of pyrrole has been set up in order to produce thin, (> 15 {mu}g/cm2) homogeneous (thickness variation < 2%) films, with no need for additional metallization to be used as backings of radioactive sources, having 10-0,4 Kfl/sample, for 35-70 {mu}g/cm . The experimental equipment, reagent and procedure utilized is described as well as the characterization of Pyrrolyc films produced. (Author) 28 refs.

  5. Active sites of the cytochrome p450cam (CYP101) F87W and F87A mutants. Evidence for significant structural reorganization without alteration of catalytic regiospecificity.

    Science.gov (United States)

    Tuck, S F; Graham-Lorence, S; Peterson, J A; Ortiz de Montellano, P R

    1993-01-05

    Ferricyanide oxidation of the aryl-iron complexes formed by the reaction of cytochrome P450 enzymes with arylhydrazines causes in situ migration of the aryl group from the iron to the porphyrin nitrogen atoms. The regiochemistry of this migration, defined by the ratio of the four possible N-arylprotoporphyrin IX isomers, provides a method for mapping the topologies of cytochrome P450 active sites. The method has been validated by using it to examine the active site of cytochrome P450cam (CYP101), for which a crystal structure is available. In agreement with the crystal structure, reaction with phenylhydrazine gives a 5:25:70 ratio of the NA:NC:ND (subscript indicates pyrrole ring) N-phenylprotoporphyrin IX isomers. Naphthylhydrazine, however, yields exclusively the NC regioisomer and 4-(phenyl)phenylhydrazine the NA:NC:ND isomers in a 14:40:46 ratio. These isomer ratio differences are readily explained by topological differences between the upper and lower reaches of the active site. Having validated the aryl-iron shift as a topological probe, we used it to investigate the structural changes caused by mutation of Phe-87, a residue that provides the ceiling over pyrrole ring D in the crystal structure of cytochrome P450cam. Mutation of Phe-87 to a tryptophan causes no detectable change in the regiochemistry of camphor hydroxylation and only minor changes in the N-aryl isomer ratios. However, mutation of Phe-87 to an alanine, which was expected to open up the region above pyrrole ring D, severely decreased the proportion of the ND in favor of the NA isomer. Less rather than more space is therefore available over pyrrole ring D in the F87A mutant despite the fact that the regiochemistry of camphor hydroxylation remains unchanged. These results provide evidence for significant structural reorganization in the upper regions of the substrate binding site without alteration of the camphor hydroxylation regiospecificity in the F87A mutant.

  6. Structure-Activity Relationships for Some Diamine, Triamine and Schiff Base Derivatives and Their Copper(II) Complexes

    OpenAIRE

    Bolos, C. A.; Nikolov, G. St.; Ekateriniadou, L.; Kortsaris, A.; Kyriakidis, D. A.

    1998-01-01

    Ethylenediamine (en), putrescine (pu), diethylenetriamine (dien), dipropylenetriamine (dpta), spermidine (spmd) and their CuII compounds as well as the Schiff bases with 2-furaldehyde (dienOO), 2- thiophenecarboxaldehyde (dienSS) and pyrrole-2-carboxaldehyde (dienNN) of dien and that of dpta with 2- thiophenecarboxaldehyde (dptaSS), were prepared and characterised. They were tested against Bacillus substilis, Bacillus cereus, Staphylococcus aureus, Escherichia coli, Proteus vulgaris and Xanth...

  7. Ruthenium-catalyzed direct C3 alkylation of indoles with α,β-unsaturated ketones.

    Science.gov (United States)

    Li, Shuai-Shuai; Lin, Hui; Zhang, Xiao-Mei; Dong, Lin

    2015-01-28

    In this paper, a simple and highly efficient ruthenium-catalyzed direct C3 alkylation of indoles with various α,β-unsaturated ketones without chelation assistance has been developed. This novel C-H activation methodology exhibits a broad substrate scope such as different substituted indoles, pyrroles, and other azoles. Further synthetic applications of the alkylation products can lead to more attractive 3,4-fused tricyclic indoles.

  8. Development of Novel Methodologies for the Electrodeposition of Polypyrrole-based Films in Controlled Morphologies with Potential Application in Nitrate Sensing.

    OpenAIRE

    McCarthy, Conor P.

    2013-01-01

    In this thesis the novel electrochemical deposition of poly[N-(2-cyanoethyl)pyrrole] (PPyEtCN) into nanowire and microtube morphologies is reported. Cyclic and pulsed electrochemical techniques were employed to electrodeposit copper micro and nano particles at PPyEtCN and polypyrrole (PPy) surfaces. A PPy nanowire/copper modified electrode was investigated for its effectiveness as an electrochemical sensor for the detection of the nitrate ion. To produce PPyEtCN in a nanowir...

  9. POLYPYRROLE COATED CELLULOSIC SUBSTRATE MODIFIED BY COPPER OXIDE AS ELECTRODE FOR NITRATE ELECTROREDUCTION

    OpenAIRE

    A. HAMAM; D. OUKIL; A. DIB; H. HAMMACHE; L. MAKHLOUFI; B. SAIDANI

    2015-01-01

    The aim of this work is to synthesize polypyrrole (PPy) films on nonconducting cellulosic substrate and modified by copper oxide particles for use in the nitrate electroreduction process. Firstly, the chemical polymerization of polypyrrole onto cellulosic substrate is conducted by using FeCl3 as an oxidant and pyrrole as monomer. The thickness and topography of the different PPy films obtained were estimated using a profilometer apparatus. The electrochemical reactivity of the obtained electr...

  10. Electrodeposition and Capacitive Behavior of Films for Electrodes of Electrochemical Supercapacitors

    OpenAIRE

    Shi C; Zhitomirsky I

    2010-01-01

    Abstract Polypyrrole films were deposited by anodic electropolymerization on stainless steel substrates from aqueous pyrrole solutions containing sodium salicylate and tiron additives. The deposition yield was studied under galvanostatic conditions. The amount of the deposited material was varied by the variation of deposition time at a constant current density. SEM studies showed the formation of porous films with thicknesses in the range of 0–3 μm. Cyclic voltammetry data for the...

  11. High-capacitance supercapacitors using nitrogen-decorated porous carbon derived from novolac resin containing peptide linkage

    OpenAIRE

    Kim, Yong Jung; Jang, In Young; Park, Ki Chul; Jung, Yong Chae; Oka, Takuyuki; Iinou, Satoshi; Komori, Yasuhiro; Kozutsumi, Toshihiko; Hashiba, Takashi; Kim, Yoong Ahm; Endo, Morinobu

    2010-01-01

    We fabricated nitrogen-decorated porous carbon exhibiting high capacitance per unit volume and unit weight via chemical activation of novolac resin containing peptide linkage. The porosity and the amount of nitrogen atoms were controlled by changing the molecular weight of novolac resin, the added amount of potassium hydroxide, or both. After chemical activation, positively charged nitrogen atoms (i.e., pyridine/pyrrole) at 400.3 eV in photoemission spectra contributed to both a shift in the ...

  12. Virtual libraries of tetrapyrrole macrocycles. Combinatorics, isomers, product distributions, and data mining.

    Science.gov (United States)

    Taniguchi, Masahiko; Du, Hai; Lindsey, Jonathan S

    2011-09-26

    A software program (PorphyrinViLiGe) has been developed to enumerate the type and relative amounts of substituted tetrapyrrole macrocycles in a virtual library formed by one of four different classes of reactions. The classes include (1) 4-fold reaction of n disubstituted heterocycles (e.g., pyrroles or diiminoisoindolines) to form β-substituted porphyrins, β-substituted tetraazaporphyrins, or α- or β-substituted phthalocyanines; (2) combination of m aminoketones and n diones to form m × n pyrroles, which upon 4-fold reaction give β-substituted porphyrins; (3) derivatization of an 8-point tetrapyrrole scaffold with n reagents, and (4) 4-fold reaction of n aldehydes and pyrrole to form meso-substituted porphyrins. The program accommodates variable ratios of reactants, reversible or irreversible reaction (reaction classes 1 and 2), and degenerate modes of formation. Pólya's theorem (for enumeration of cyclic entities) has also been implemented and provides validation for reaction classes 3 and 4. The output includes the number and identity of distinct reaction-accessible substituent combinations, the number and identity of isomers thereof, and the theoretical mass spectrum. Provisions for data mining enable assessment of the number of products having a chosen pattern of substituents. Examples include derivatization of an octa-substituted phthalocyanine with eight reagents to afford a library of 2,099,728 members (yet only 6435 distinct substituent combinations) and reversible reaction of six distinct disubstituted pyrroles to afford 2649 members (yet only 126 distinct substituent combinations). In general, libraries of substituted tetrapyrrole macrocycles occupy a synthetically accessible region of chemical space that is rich in isomers (>99% or 95% for the two examples, respectively).

  13. Synthesis and evaluation of sequence-specific DNA alkylating agents: effect of alkylation subunits.

    Science.gov (United States)

    Shimizu, Tatsuhiko; Sasaki, Shunta; Minoshima, Masafumi; Shinohara, Ken-ichi; Bando, Toshikazu; Sugiyama, Hiroshi

    2006-01-01

    We have demonstrated that hairpin pyrrole (Py)- imidazole (Im) polyamide-CBI conjugates selectively alkylate predetermined sequences. In this study, we investigated the effect of alkylation subunits, for example conjugates 1-4 with three types of DNA alkylating units, and Py-Im polyamides with indole linker. Conjugate 3 and 4 selectively alkylated the predetermined sequences as described previously, while conjugates 1 and 2 alkylate at mismatched sites.

  14. Synthetic Approaches to the Lamellarins—A Comprehensive Review

    Directory of Open Access Journals (Sweden)

    Dennis Imbri

    2014-12-01

    Full Text Available The present review discusses the known synthetic routes to the lamellarin alkaloids published until 2014. It begins with syntheses of the structurally simpler type-II lamellarins and then focuses on the larger class of the 5,6-saturated and -unsaturated type-I lamellarins. The syntheses are grouped by the strategy employed for the assembly of the central pyrrole ring.

  15. Electrochemical synthesis of polypyrrole on ferrous and non-ferrous metals from sweet aqueous electrolytic medium

    International Nuclear Information System (INIS)

    Bazzaoui, M.; Martins, J.I.; Reis, T.C.; Bazzaoui, E.A.; Nunes, M.C.; Martins, L.

    2005-01-01

    The electrodeposition of polypyrrole (PPy) on oxidizable metals such as aluminum and iron has been achieved in aqueous medium of saccharin and pyrrole. Scanning electron microscopy and X-ray photoelectron spectroscopy analysis reveal a good homogeneity of the obtained PPy film. The electrochemical synthesis of PPy coating has been achieved successfully under potentiodynamic, galvanostatic and potentiostatic techniques. The corrosion experiments performed in HCl show that the PPy coating increases the corrosion potential and decreases the corrosion current density

  16. Ammonia-treated porous carbon derived from ZIF-8 for enhanced CO{sub 2} adsorption

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Xiancheng [School of Energy Science and Engineering, Central South University, Changsha 410083, Hunan (China); Li, Liqing, E-mail: liqingli@hotmail.com [School of Energy Science and Engineering, Central South University, Changsha 410083, Hunan (China); Wang, Shaobin [Department of Chemical Engineering, Curtin University, GPO Box U1987, Perth 6845, WA (Australia); Lu, Mingming [Department of Civil and Environmental Engineering, University of Cincinnati, Cincinnati, OH 45221 (United States); Li, Hailong; Ma, Weiwu [School of Energy Science and Engineering, Central South University, Changsha 410083, Hunan (China); Keener, Tim C. [Department of Civil and Environmental Engineering, University of Cincinnati, Cincinnati, OH 45221 (United States)

    2016-04-30

    Graphical abstract: The role of nitrogen species in increasing CO{sub 2} adsorption capacity has been explained with the mechanisms of base–acid interaction, as well as hydrogen bonds interaction. - Highlights: • A porous carbon (ZC) was prepared at 900 °C using ZIF-8 as a solid template for CO{sub 2} adsorption. • The ZC was further treated by ammonia functionalization to improve CO{sub 2} uptake. • The detailed interaction mechanism between N-containing groups and CO{sub 2} molecules is elucidated. - Abstract: A porous carbon (ZC) was prepared at 900 °C using zeolitic imidazolate framework-8 (ZIF-8) as a solid template for CO{sub 2} adsorption. The ZC was further treated by ammonia functionalization to improve CO{sub 2} uptake. The textural and surface characteristics of ZC samples were determined by X-ray diffraction (XRD), N{sub 2} adsorption, Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). It was revealed that ammonia treatment at 600 °C considerably enhanced the specific surface area and N-content of ZC. However, the pyrrolic-N group was decreased, yet the pyridinic-N group was increased with an increased temperature. The pyrrolic-N significantly enhanced CO{sub 2} adsorption. The ammonia treatment, on the one hand, increases the alkalinity of ZC sample and the base–acid interaction between N-containing functional groups with CO{sub 2}. On the other hand, the ammonia treatment increased pyrrolic-N group (NH) into carbon surface facilitating the hydrogen-bonding interactions between proton of pyrrolic-N and CO{sub 2} molecules.

  17. Isotopic labelling studies for a gold-catalysed skeletal rearrangement of alkynyl aziridines

    Directory of Open Access Journals (Sweden)

    Neil Spencer

    2011-06-01

    Full Text Available Isotopic labelling studies were performed to probe a proposed 1,2-aryl shift in the gold-catalysed cycloisomerisation of alkynyl aziridines into 2,4-disubstituted pyrroles. Two isotopomers of the expected skeletal rearrangement product were identified using 13C-labelling and led to a revised mechanism featuring two distinct skeletal rearrangements. The mechanistic proposal has been rationalised against the reaction of a range of 13C- and deuterium-labelled substrates.

  18. Photocatalytic and microwave absorbing properties of polypyrrole/Fe-doped TiO2 composite by in situ polymerization method

    International Nuclear Information System (INIS)

    Li Qiaoling; Zhang Cunrui; Li Jianqiang

    2011-01-01

    Research highlights: → Polypyrrole/Fe-doped TiO 2 composite is prepared by in situ polymerization of pyrrole on the Fe-doped TiO 2 template. → The Fe-doped TiO 2 microbelts are prepared by sol-gel method using the absorbent cotton template for the first time. → Then the Fe-doped TiO 2 microbelts are used as template for the preparation of polypyrrole/Fe-doped TiO 2 composites. → The structure, morphology and properties of the composites are characterized with scanning electron microscope (SEM), IR, Net-work Analyzer. → A possible formation mechanism of Fe-doped TiO 2 microbelts and polypyrrole/Fe-doped TiO 2 composites has been proposed. → The effect of the mol ratio of pyrrole/Fe-doped TiO 2 on the photocatalysis properties and microwave loss properties of the composites is investigated. - Abstract: The Fe-doped TiO 2 microbelts were prepared by sol-gel method using the absorbent cotton template for the first time. Then the Fe-doped TiO 2 microbelts were used as templates for the preparation of polypyrrole/Fe-doped TiO 2 composites. Polypyrrole/Fe-doped TiO 2 composites were prepared by in situ polymerization of pyrrole on the Fe-doped TiO 2 template. The structure, morphology and properties of the composites were characterized with scanning electron microscope (SEM), FTIR, Net-work Analyzer. The possible formation mechanisms of Fe-doped TiO 2 microbelts and polypyrrole/Fe-doped TiO 2 composites have been proposed. The effect of the molar ratio of pyrrole/Fe-doped TiO 2 on the photocatalytic properties and microwave loss properties of the composites was investigated.

  19. Crystal structure of (2R*,3aR*-2-phenylsulfonyl-2,3,3a,4,5,6-hexahydropyrrolo[1,2-b]isoxazole

    Directory of Open Access Journals (Sweden)

    Yaiza Hernández

    2017-01-01

    Full Text Available The title compound, C12H15NO3S, was prepared by 1,3-dipolar cycloaddition of 3,4-dihydro-2H-pyrrole 1-oxide and phenyl vinyl sulfone. In the molecule, both fused five-membered rings display a twisted conformation. In the crystal, C—H...O hydrogen bonds link neighbouring molecules, forming chains running parallel to the b axis.

  20. Preparation and Surface Analysis of PPY/SDBS Films on Aluminum Substrates

    Directory of Open Access Journals (Sweden)

    Lisete C. Scienza

    2001-09-01

    Full Text Available Polypyrrole films were generated on high purity aluminum substrates under anodic polarization from aqueous electrolytes comprised of pyrrole and sodium dodecylbenzene sulfonate. The methods employed to characterize the polymer films included scanning electron microscopy, Fourier-transform infrared and X-photoelectron spectroscopy and X-ray diffraction. PPY/SDBS films revealed nodular morphology with occasional appearing of "dendrites", high level of protonation, excess of counter-anions ([S]/[N] > [N+]/[N] and high degrees of disorder.

  1. Facile one-pot synthesis of porphyrin based porous polymer networks (PPNs) as biomimetic catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Zou, LF; Feng, DW; Liu, TF; Chen, YP; Fordham, S; Yuan, S; Tian, J; Zhou, HC

    2015-01-01

    Stable porphyrin based porous polymer networks, PPN-23 and PPN-24, have been synthesized through a facile one-pot approach by the aromatic substitution reactions of pyrrole and aldehydes. PPN-24(Fe) shows high catalytic efficiency as a biomimetic catalyst in the oxidation reaction of 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) in the presence of H2O2.

  2. Preparation and characterization of sodium dodecyl sulfate doped polypyrrole solid phase micro extraction fiber and its application to endocrine disruptor pesticide analysis

    OpenAIRE

    Korba, Korcan; Pelit, Levent; Okçu Pelit, Füsun; Özdokur, K. Volkan; Ertaş, Hasan; Eroğlu, Ahmet E.; Ertaş, Fatma Nil

    2013-01-01

    A robust in house solid-phase micro extraction (SPME) surface has been developed for the headspace (HS)-SPME determination of endocrine disruptor pesticides, namely, Chlorpyrifos, Penconazole, Procymidone, Bromopropylate and Lambda-Cyhalothrin in wine sample by using sodium dodecylsulfate doped polypyrrole SPME fiber. Pyrrole monomer was electrochemically polymerized on a stainless steel wire in laboratory conditions in virtue of diminishing the cost and enhancing the analyte retention on its...

  3. Metallated DNA Aptamers for Prostate Cancer Treatment

    Science.gov (United States)

    2013-03-01

    backbone, and the deleting the thymidine methyl group and replacement with fluorine. In keeping with our previous work (Ghosh et al. 2011), every...minor groove while the new 320 nm maxima reflect the binding of N- methyl pyrrole moieties of netropsin in the minor groove of 3’FdU.(Zimmer, Marck...malignancies. PSMA is an exopeptidase 2 with folate hydrolase and NAALDase activities. PSMA also associates with anaphase promoting complex and its

  4. Charge separation dynamics in a narrow band gap polymer-PbS nanocrystal blend for efficient hybrid solar cells

    NARCIS (Netherlands)

    Piliego, Claudia; Manca, Marianna; Kroon, Renee; Yarema, Maksym; Szendrei, Krisztina; Andersson, Mats R.; Heiss, Wolfgang; Loi, Maria A.

    2012-01-01

    We have demonstrated efficient hybrid solar cells based on lead sulfide (PbS) nanocrystals and a narrow band gap polymer, poly[{2,5-bis(2-hexyldecyl)-2,3,5,6-tetrahydro-3,6-dioxopyrrolo[3,4-c]pyrrole-1,4-diyl}-alt-{[2,2'-(1,4-phenylene)bis-thiophene]-5,5'-diyl}], (PDPPTPT). An opportune mixing of

  5. The synthesis of Ag/polypyrrole coaxial nanocables via ion adsorption method using different oxidants

    Science.gov (United States)

    Qiu, Teng; Xie, Huxiao; Zhang, Jiangru; Zahoor, Amad; Li, Xiaoyu

    2011-03-01

    Ag/polypyrrole (PPy) coaxial nanocables (NCs) were synthesized by an ion adsorption method. In this method, the pre-made Ag nanowires (NWs) were dispersed in the aqueous solution of copper acetate (Cu(Ac)2), and the Cu2+ ions adsorbed onto the surface of Ag NWs can oxidize pyrrole monomers to polymerize into uniform PPy sheath outside Ag NWs after the Cu(Ac)2-treated Ag NWs were re-dispersed in the aqueous solution of pyrrole. The morphology of NCs was characterized by transmission electron microscope (TEM) and scanning electron microscope (SEM). The relationship between the thickness of polymer sheath and the concentration of Cu(Ac)2 was established. As Cu(Ac)2 which served as the oxidant can also be replaced by AgNO3 in this synthesis, the differences on the structure of polymer sheath caused by different oxidants were studied by surface-enhanced Raman scattering (SERS), high-resolution transmission electron microscope (HR-TEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS). Comparing with the characterization results of Ag/PPy NCs synthesized using AgNO3 as the oxidant which indicates the random arrangement of PPy chains at the interface between polymer sheath and Ag NWs, PPy chain oxidized by Cu2+ tends to show a relatively ordered conformation at the interface with the pyrrole rings identically taking the plane vertical to the surface of Ag NWs. In addition, although the main part of the polymer sheath was composed of PPy whatever kind of oxidant was used, the sheath of the NCs oxidized by Cu2+ is typical for the existence of Cu(I)-pyrrole coordinate structures with strong Cu(I)-N bond signal shown in XPS characterization.

  6. The synthesis of Ag/polypyrrole coaxial nanocables via ion adsorption method using different oxidants

    International Nuclear Information System (INIS)

    Qiu Teng; Xie Huxiao; Zhang Jiangru; Zahoor, Amad; Li Xiaoyu

    2011-01-01

    Ag/polypyrrole (PPy) coaxial nanocables (NCs) were synthesized by an ion adsorption method. In this method, the pre-made Ag nanowires (NWs) were dispersed in the aqueous solution of copper acetate (Cu(Ac) 2 ), and the Cu 2+ ions adsorbed onto the surface of Ag NWs can oxidize pyrrole monomers to polymerize into uniform PPy sheath outside Ag NWs after the Cu(Ac) 2 -treated Ag NWs were re-dispersed in the aqueous solution of pyrrole. The morphology of NCs was characterized by transmission electron microscope (TEM) and scanning electron microscope (SEM). The relationship between the thickness of polymer sheath and the concentration of Cu(Ac) 2 was established. As Cu(Ac) 2 which served as the oxidant can also be replaced by AgNO 3 in this synthesis, the differences on the structure of polymer sheath caused by different oxidants were studied by surface-enhanced Raman scattering (SERS), high-resolution transmission electron microscope (HR-TEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS). Comparing with the characterization results of Ag/PPy NCs synthesized using AgNO 3 as the oxidant which indicates the random arrangement of PPy chains at the interface between polymer sheath and Ag NWs, PPy chain oxidized by Cu 2+ tends to show a relatively ordered conformation at the interface with the pyrrole rings identically taking the plane vertical to the surface of Ag NWs. In addition, although the main part of the polymer sheath was composed of PPy whatever kind of oxidant was used, the sheath of the NCs oxidized by Cu 2+ is typical for the existence of Cu(I)–pyrrole coordinate structures with strong Cu(I)–N bond signal shown in XPS characterization.

  7. Cytotoxicity of pyrrolizidine alkaloid in human hepatic parenchymal and sinusoidal endothelial cells: Firm evidence for the reactive metabolites mediated pyrrolizidine alkaloid-induced hepatotoxicity.

    Science.gov (United States)

    Yang, Mengbi; Ruan, Jianqing; Fu, Peter P; Lin, Ge

    2016-01-05

    Pyrrolizidine alkaloids (PAs) widely distribute in plants and can cause hepatic sinusoidal obstruction syndrome (HSOS), which typically presents as a primary sinusoidal endothelial cell damage. It is well-recognized that after ingestion, PAs undergo hepatic cytochromes P450 (CYPs)-mediated metabolic activation to generate dehydropyrrolizidine alkaloids (DHPAs), which are hydrolyzed to dehydroretronecine (DHR). DHPAs and DHR are reactive metabolites having same core pyrrole moiety, and can bind proteins to form pyrrole-protein adducts, which are believed as the primary cause for PA-induced HSOS. However, to date, the direct evidences supporting the toxicity of DHPAs and DHR in the liver, in particular in the sinusoidal endothelial cells, are lacking. Using human hepatic sinusoidal endothelial cells (HSEC) and HepG2 (representing hepatic parenchymal cells), cells that lack CYPs activity, this study determined the direct cytotoxicity of dehydromonocrotaline, a representative DHPA, and DHR, but no cytotoxicity of the intact PA (monocrotaline) in both cell lines, confirming that reactive metabolites mediate PA intoxication. Comparing with HepG2, HSEC had significantly lower basal glutathione (GSH) level, and was significantly more susceptible to the reactive metabolites with severer GSH depletion and pyrrole-protein adducts formation. The toxic potency of two reactive metabolites was also compared. DHPA was more reactive than DHR, leading to severer toxicity. In conclusion, our results unambiguously provided the first direct evidence for the critical role of DHPA and DHR in the reactive metabolites-mediated PA-induced hepatotoxicity, which occurs predominantly in HSEC due to severe GSH depletion and the significant formation of pyrrole-protein adducts in HSEC. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  8. Metabolic activation of pyrrolizidine alkaloids: insights into the structural and enzymatic basis.

    Science.gov (United States)

    Ruan, Jianqing; Yang, Mengbi; Fu, Peter; Ye, Yang; Lin, Ge

    2014-06-16

    Pyrrolizidine alkaloids (PAs) are natural toxins widely distributed in plants. The toxic potencies of different PAs vary significantly. PAs are mono- or diesters of necine acids with a necine base. On the basis of the necine bases, PAs are classified into three types: retronecine-type, otonecine-type, and platynecine-type. Hepatotoxic PAs contain an unsaturated necine base. PAs exert hepatotoxicity through metabolic activation by hepatic cytochromes P450s (CYPs) to generate reactive intermediates which form pyrrole-protein adducts. These adducts provide a mechanism-based biomarker to assess PA toxicity. In the present study, metabolic activation of 12 PAs from three structural types was investigated first in mice to demonstrate significant variations in hepatic metabolic activation of different PAs. Subsequently, the structural and enzymatic factors affecting metabolic activation of these PAs were further investigated by using human liver microsomes and recombinant human CYPs. Pyrrole-protein adducts were detected in the liver and blood of mice and the in vitro systems treated with toxic retronecine-type and otonecine-type PAs having unsaturated necine bases but not with a platynecine-type PA containing a saturated necine base. Retronecine-type PAs produced more pyrrole-protein adducts than otonecine-type PAs with similar necine acids, demonstrating that the structure of necine base affected PA toxic potency. Among retronecine-type PAs, open-ring diesters generated the highest amount of pyrrole-protein adducts, followed by macrocyclic diesters, while monoesters produced the least. Only CYP3A4 and CYP3A5 activated otonecine-type PAs, while all 10 CYPs studied showed the ability to activate retronecine-type PAs. Moreover, the contribution of major CYPs involved also varied significantly among retronecine-type PAs. In conclusion, our findings provide a scientific basis for predicting the toxicities of individual PAs in biological systems based on PA structural

  9. Structures of the NH tautomers of tetraethylporphyrin and its isocyclic derivative

    International Nuclear Information System (INIS)

    Shul'ga, A.M.; Gladkov, L.L.; Stanishevskii, I.V.; Starukhin, A.S.

    1987-01-01

    Vibronic spectra with detailed structure have been recorded in the fluorescence of the NH tautomers of 2,3,12,13-tetraethylporphyrin (TEP), 13',15'-cyclo-13'-methyl-2,3,12-triethylporphyrin (TEPC), and derivatives of these deuterated at the center, which has involved the use of selective laser excitation at 4.2 K. The degrees of polarization have been measured for the individual phonon-free lines. The vibrational structures and 1 H NMR data (two independent methods) have given the structures of the NH tautomers. The short-wave (main) tautomer of TEP has the imine protons on the pyrrole rings containing ethyl substituents, while the long-wave one has them on the pyrrole rings containing protons in the β positions. The intensities of the lines relating mainly to vibrations of the ethyl groups are sensitive to the positions of the central protons. A difference from the tetraalkylporphyrins is that the main TEPC tautomer has the central protons positioned on opposite pyrrole rings not linked to the isocycle as being more favored by energy considerations

  10. One pot synthesis of polypyrrole silver nanocomposite on cotton fabrics for multifunctional property.

    Science.gov (United States)

    Firoz Babu, K; Dhandapani, P; Maruthamuthu, S; Anbu Kulandainathan, M

    2012-11-06

    Polymer-silver nanocomposites modified cotton fabrics were prepared by in situ chemical oxidative polymerization using pyrrole and silver nitrate. In a redox reaction between pyrrole and silver nitrate, silver ions oxidize the pyrrole monomer and get reduced. This reduced silver as nanoparticles deposited on/into the polypyrrole/cotton matrix layer and the interaction between silver and polypyrrole was by adsorption or electrostatic interaction. The structure and composite formation on cotton fiber was investigated using SEM, FT-IR, XPS and XRD. The results showed that a strong interaction existing between silver nanoparticles with polypyrrole/cotton matrix. FT-IR studies clearly indicated that the interaction between polypyrrole (-N-H) and cellulose (>C-OH) was by hydrogen bonding. It is observed that the conductivity of the composite coated fabrics has been increased by the incorporation of silver nanoparticles. In the synthesized composites, silver content plays an important role in the conductivity and antimicrobial activity rate of the fabrics against gram positive Staphylococcus aureus and gram negative Escherichia coli bacteria. Copyright © 2012 Elsevier Ltd. All rights reserved.

  11. Selective recognition by novel calix system: ICT based chemosensor for metal ions

    International Nuclear Information System (INIS)

    Bhatt, Keyur D.; Makwana, Bharat A.; Vyas, Disha J.; Mishra, Divya R.; Jain, Vinod K.

    2014-01-01

    A new calix[4]pyrrole derivative bearing four dansyl groups through hydroxyl groups has been synthesized and duly characterized by FT-IR, NMR and ESI-MS. Tetra dansylated calix[4]pyrrole (TDCP) shows selective behavior for U(VI), Th(IV) and Fe(III) ions among all other metal ions, e.g. Li(I), Na(I), K(I), Ca(II), Ni(II), Cd(II), Cu(II), Zn(II), Pb(II), Hg(II) and Ag(I), in the absorption spectra as well as in the emission spectra. The absorption spectra show a bathochromic shift while the emission spectra along with red-shift exhibit quenching for U(VI), Th(IV) and Fe(III) ions. The binding constants, stoichiometry and quantum yields have been determined. The mechanism of quenching by Stern–Vohmer equation has also been discussed. -- highlights: • A new selective turn-off fluorescent sensor i.e. tetra dansylated calix[4]pyrrole (TDCP) was synthesized and characterized. • The sensor shows selective behavior for U(VI), Th(IV) and Fe(III) ions among various other metal ions. • The absorption spectra show a bathochromic shift while the emission spectra along with red-shift exhibit quenching for U(VI), Th(IV) and Fe(III) ions. • The sensor binds metal ions in 1:1 stoichiometry with good binding constant

  12. Shuttle inhibition by chemical adsorption of lithium polysulfides in B and N co-doped graphene for Li-S batteries.

    Science.gov (United States)

    Li, Fen; Su, Yan; Zhao, Jijun

    2016-09-14

    The advance of lithium sulfur batteries is now greatly restricted by the fast capacity fading induced by shuttle effect. Using first-principles calculations, various vacancies, N doping, and B,N co-doping in graphene sheets have been systematically explored for lithium polysufides entrapped in Li-S batteries. The LiS, LiC, LiN and SB bonds and Hirshfeld charges in the Li 2 S 6 adsorbed defective graphene systems have been analyzed to understand the intrinsic mechanism of retaining lithium polysulfides in these systems. Total and local densities of states analyses elucidate the strongest adsorption sites among the N and B-N co-doped graphene systems. The overall electrochemical performance of Li-S batteries varies with the types of defects in graphene. Among the defective graphene systems, only the reconstructed pyrrole-like vacancy is effective for retaining lithium polysulfides. N doping induces a strong LiN interaction in the defective graphene systems, in which the pyrrolic N rather than the pyridinic N plays a dominant role in trapping of lithium polysulfides. The shuttle effect can be further depressed via pyrrolic B,N co-doped defective graphene materials, especially the G-B-N-hex system with extremely strong adsorption of lithium polysulfides (4-5 eV), and simultaneous contribution from the strong LiN and SB interactions.

  13. A Phosphine-mediated Synthesis of 2,3,4,5-tetra-substituted N-hydroxypyrroles from α-oximino Ketones and Dialkyl Acetylenedicarboxylates Under Ionic Liquid Green-media.

    Science.gov (United States)

    Shahvelayati, Ashraf S; Ghazvini, Maryam; Yadollahzadeh, Khadijeh; Delbari, Akram S

    2018-01-01

    The development of multicomponent reactions (MCRs) in the presence of task-specific ionic liquids (ILs), used not only as environmentally benign reaction media, but also as catalysts, is a new approach that meet with the requirements of sustainable chemistry. In recent years, the use of ionic liquids as a green media for organic synthesis has become a chief study area. This is due to their unique properties such as non-volatility, non-flammability, chemical and thermal stability, immiscibility with both organic compounds and water and recyclability. Ionic liquids are used as environmentally friendly solvents instead of hazardous organic solvents. We report the condensation reaction between α-oximinoketone and dialkyl acetylene dicarboxylate in the presence of triphenylphosphine to afford substituted pyrroles under ionic liquid conditions in good yields. Densely functionalized pyrroles was easily prepared from reaction of α-oximinoketones, dialkyl acetylene dicarboxylate in the presence of triphenylphosphine in a quantitative yield under ionic liquid conditions at room temperature. In conclusion, ionic liquids are indicated as a useful and novel reaction medium for the selective synthesis of functionalized pyrroles. This reaction medium can replace the use of hazardous organic solvents. Easy work-up, synthesis of polyfunctional compounds, decreased reaction time, having easily available-recyclable ionic liquids, and good to high yields are advantages of present method. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  14. DNA cross-linking by dehydromonocrotaline lacks apparent base sequence preference.

    Science.gov (United States)

    Rieben, W Kurt; Coulombe, Roger A

    2004-12-01

    Pyrrolizidine alkaloids (PAs) are ubiquitous plant toxins, many of which, upon oxidation by hepatic mixed-function oxidases, become reactive bifunctional pyrrolic electrophiles that form DNA-DNA and DNA-protein cross-links. The anti-mitotic, toxic, and carcinogenic action of PAs is thought to be caused, at least in part, by these cross-links. We wished to determine whether the activated PA pyrrole dehydromonocrotaline (DHMO) exhibits base sequence preferences when cross-linked to a set of model duplex poly A-T 14-mer oligonucleotides with varying internal and/or end 5'-d(CG), 5'-d(GC), 5'-d(TA), 5'-d(CGCG), or 5'-d(GCGC) sequences. DHMO-DNA cross-links were assessed by electrophoretic mobility shift assay (EMSA) of 32P endlabeled oligonucleotides and by HPLC analysis of cross-linked DNAs enzymatically digested to their constituent deoxynucleosides. The degree of DNA cross-links depended upon the concentration of the pyrrole, but not on the base sequence of the oligonucleotide target. Likewise, HPLC chromatograms of cross-linked and digested DNAs showed no discernible sequence preference for any nucleotide. Added glutathione, tyrosine, cysteine, and aspartic acid, but not phenylalanine, threonine, serine, lysine, or methionine competed with DNA as alternate nucleophiles for cross-linking by DHMO. From these data it appears that DHMO exhibits no strong base preference when forming cross-links with DNA, and that some cellular nucleophiles can inhibit DNA cross-link formation.

  15. Formation of nitrogen compounds from nitrogen-containing rings during oxidative regeneration of spent hydroprocessing catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Furimsky, E.; Nielsen, M.; Jurasek, P. [CANMET, Ottawa, ON (Canada). Energy Research Laboratories

    1995-05-01

    Commercial CoMo and NiMo catalysts in an oxidic and sulfided form and a {gamma}-alumina were deposited with pyrrole, pyridine, and quinoline. The deposited catalysts and two spent hydroprocessing catalysts were pyrolyzed and oxidized under conditions typical of regeneration of hydroprocessing catalysts. The formation of NH{sub 3} and HCN, as well as selected cases of N{sub 2}O and NO, was monitored during the experiments. NH{sub 3} and HCN were formed during pyrolysis of pyrrole-deposited catalysts whereas only NH{sub 3} was formed during that of pyridine-and quinoline-deposited catalysts. For all deposited catalysts, both NH{sub 3} and HCN were formed during temperature programmed oxidation in 2% O{sub 2}. For spent catalysts, a small amount of N{sub 2}O was formed in 2 and 4% O{sub 2}. For pyrrole-deposited catalysts, large yields of N{sub 2}O were formed in 4% O{sub 2}. Under the same conditions, N{sub 2}O yields for pyridine- and quinoline-deposited catalysts were very small. 13 refs., 12 figs., 6 tabs.

  16. Conducting polymers and hybrid nano-materials for electrochemical storage; Polymeres conducteurs electroniques et nanomateriaux hybrides pour le stockage de l'energie

    Energy Technology Data Exchange (ETDEWEB)

    Mallouki, M.

    2006-02-15

    In this work, we report first on the preparation of nano-structures based on poly-pyrrole and iron oxide nano-particles by oxidative polymerisation of pyrrole in colloidal solution of Fe{sub 2}O{sub 3}. The conductivity and the morphology of nano-composites were studied and related to the doping agent role and the weight ratio (Fe{sub 2}O{sub 3}/PPy). The specific capacity measurement on the composite electrode (based on the nano-composite, acetylene black and binders) indicate a significant enhancement of charge storage for nano-composites compared to pure poly-pyrrole. Then, we investigated the synthesis and characterisation of composite electrode based on poly 3-methyl-thiophene (PMeT), which depend on different methods of preparation, electrolyte and doping potential. Finally, a room temperature ionic liquid (RTIL) such as imidazolium tri-fluoro-methane-sulfonimide (EMITFSI), was used and seem to be a promising electrolyte since it increases further the capacity with a high stability during charge-discharge processes. (author)

  17. Hybrid conducting polymer materials incorporating poly-oxo-metalates for extraction of actinides; Materiaux polymeres conducteurs hybrides incorporant des polyoxometallates pour l'extraction d'actinides

    Energy Technology Data Exchange (ETDEWEB)

    Racimor, D

    2003-09-15

    The preparation and characterization of hybrid conducting polymers incorporating poly-oxo-metalates for extracting actinides is discussed. A study of the coordination of various lanthanide cations (Ce(III), Ce(IV), Nd(III)) by the mono-vacant poly-oxo-metalate {alpha}{sub 2}-[P{sub 2}W{sub 17}O{sub 61}]{sup 10-} showed significant differences according to the cation.. Various {alpha}-A-[PW{sub 9}O{sub 34}(RPO){sub 2}]{sup 5-} hybrids were synthesized and their affinity for actinides or lanthanides was demonstrated through complexation. The first hybrid poly-oxo-metallic lanthanide complexes were then synthesized, as was the first hybrid functionalized with a pyrrole group. The electro-polymerization conditions of this pyrrole remain still to be optimized. Poly-pyrrole materials incorporating {alpha}{sub 2}-[P{sub 2}W{sub 17}O{sub 61}]{sup 10-} or its neodymium or cerium complexes as doping agents proved to be the first conducting polymer incorporating poly-oxo-metalates capable of extracting plutonium from nitric acid. (author)

  18. Different Effect of the Additional Electron-Withdrawing Cyano Group in Different Conjugation Bridge: The Adjusted Molecular Energy Levels and Largely Improved Photovoltaic Performance.

    Science.gov (United States)

    Li, Huiyang; Fang, Manman; Hou, Yingqin; Tang, Runli; Yang, Yizhou; Zhong, Cheng; Li, Qianqian; Li, Zhen

    2016-05-18

    Four organic sensitizers (LI-68-LI-71) bearing various conjugated bridges were designed and synthesized, in which the only difference between LI-68 and LI-69 (or LI-70 and LI-71) was the absence/presence of the CN group as the auxiliary electron acceptor. Interestingly, compared to the reference dye of LI-68, LI-69 bearing the additional CN group exhibited the bad performance with the decreased Jsc and Voc values. However, once one thiophene moiety near the anchor group was replaced by pyrrole with the electron-rich property, the resultant LI-71 exhibited a photoelectric conversion efficiency increase by about 3 folds from 2.75% (LI-69) to 7.95% (LI-71), displaying the synergistic effect of the two moieties (CN and pyrrole). Computational analysis disclosed that pyrrole as the auxiliary electron donor (D') in the conjugated bridge can compensate for the lower negative charge in the electron acceptor, which was caused by the CN group as the electron trap, leading to the more efficient electron injection and better photovoltaic performance.

  19. Midrange affinity fluorescent Zn(II) sensors of the Zinpyr family: syntheses, characterization, and biological imaging applications.

    Science.gov (United States)

    Nolan, Elizabeth M; Jaworski, Jacek; Racine, Maryann E; Sheng, Morgan; Lippard, Stephen J

    2006-11-27

    The syntheses and photophysical characterization of ZP9, 2-{2-chloro-6-hydroxy-3-oxo-5-[(2-{[pyridin-2-ylmethyl-(1H-pyrrol-2-ylmethyl)amino]methyl}phenylamino)methyl]-3H-xanthen-9-yl}benzoic acid, and ZP10, 2-{2-chloro-6-hydroxy-5-[(2-{[(1-methyl-1H-pyrrol-2-ylmethyl)pyridin-2-ylmethylamino]methyl}phenylamino)methyl]-3-oxo-3H-xanthen-9-yl}benzoic acid, two asymmetrically derivatized fluorescein-based dyes, are described. These sensors each contain an aniline-based ligand moiety functionalized with a pyridyl-amine-pyrrole group and have dissociation constants for Zn(II) in the sub-micromolar (ZP9) and low-micromolar (ZP10) range, which we define as "midrange". They give approximately 12- (ZP9) and approximately 7-fold (ZP10) fluorescence turn-on immediately following Zn(II) addition at neutral pH and exhibit improved selectivity for Zn(II) compared to the di-(2-picolyl)amine-based Zinpyr (ZP) sensors. Confocal microscopy studies indicate that such asymmetrical fluorescein-based probes are cell permeable and Zn(II) responsive in vivo.

  20. Selective recognition by novel calix system: ICT based chemosensor for metal ions

    Energy Technology Data Exchange (ETDEWEB)

    Bhatt, Keyur D.; Makwana, Bharat A.; Vyas, Disha J.; Mishra, Divya R.; Jain, Vinod K., E-mail: drvkjain@hotmail.com

    2014-02-15

    A new calix[4]pyrrole derivative bearing four dansyl groups through hydroxyl groups has been synthesized and duly characterized by FT-IR, NMR and ESI-MS. Tetra dansylated calix[4]pyrrole (TDCP) shows selective behavior for U(VI), Th(IV) and Fe(III) ions among all other metal ions, e.g. Li(I), Na(I), K(I), Ca(II), Ni(II), Cd(II), Cu(II), Zn(II), Pb(II), Hg(II) and Ag(I), in the absorption spectra as well as in the emission spectra. The absorption spectra show a bathochromic shift while the emission spectra along with red-shift exhibit quenching for U(VI), Th(IV) and Fe(III) ions. The binding constants, stoichiometry and quantum yields have been determined. The mechanism of quenching by Stern–Vohmer equation has also been discussed. -- highlights: • A new selective turn-off fluorescent sensor i.e. tetra dansylated calix[4]pyrrole (TDCP) was synthesized and characterized. • The sensor shows selective behavior for U(VI), Th(IV) and Fe(III) ions among various other metal ions. • The absorption spectra show a bathochromic shift while the emission spectra along with red-shift exhibit quenching for U(VI), Th(IV) and Fe(III) ions. • The sensor binds metal ions in 1:1 stoichiometry with good binding constant.

  1. Doping optimization of polypyrrole with toluenesulfonic acid using Box-Behnken design

    International Nuclear Information System (INIS)

    Syed Draman, Sarifah Fauziah; Daik, Rusli; El-Sheikh, Said M.; Latif, Famiza Abdul

    2013-01-01

    A three-level Box-Behnken design was employed in doping optimization of polypyrrole with toluenesulfonic acid (TSA-doped PPy). The material was synthesized via chemical oxidative polymerization using pyrrole, toluenesulfonic acid (TSA) and ammonium persulfate (APS) as monomer, dopant and oxidant, respectively. The critical factors selected for this study were concentration of dopant, molar ratio between dopant to monomer (pyrrole) and concentration of oxidant. Obtaining adequate doping level of TSA-doped PPy is crucial because it affects the charge carriers for doped PPy and usually be responsible for electronic mobility along polymeric chain. Furthermore, the doping level also affects other properties such as electrical and thermal conductivity. Doping level was calculated using elemental analysis. SEM images shows that the prepared TSA-doped PPy particles are spherical in shape with the diameters of about. The range of nanoparticles size is around 80-100 nm. The statistical analysis based on a Box–Behnken design showed that 0.01 mol of TSA, 1:1 mole ratio TSA to pyrrole and 0.25 M APS were the optimum conditions for sufficient doping level

  2. Nature of nitrogen specie in coke and their role in NOx formation during FCC catalyst regeneration

    International Nuclear Information System (INIS)

    Babich, I.V.; Seshan, K.; Lefferts, L.

    2005-01-01

    NO x emission during the regeneration of coked fluid catalytic cracking (FCC) catalysts is an environmental problem. In order to follow the route to NO x formation and try to find ways to suppress it, a coked industrial FCC catalyst has been prepared using model N-containing compounds, e.g., pyridine, pyrrole, aniline and hexadecane-pyridine mixture. Nitrogen present in the FCC feed is incorporated as polyaromatic compounds in the coke deposited on the catalyst during cracking. Its functionality has been characterized using XPS. Nitrogen specie of different types, namely, pyridine, pyrrolic or quaternary-nitrogen (Q-N) have been discriminated. Decomposition of the coke during the catalyst regeneration (temperature programmed oxidation (TPO) and isothermal oxidation) has been monitored by GC and MS measurements of the gaseous products formed. The pyrrolic- and pyridinic-type N specie, present more in the outer coke layers, are oxidized under conditions when still large amount of C or CO is available from coke to reduced NO x formed to N 2 . ''Q-N'' type species are present in the inner layer, strongly adsorbed on the acid sites on the catalyst. They are combusted last during regeneration. As most of the coke is already combusted at this point, lack of reductants (C, CO, etc.) results in the presence of NO x in the tail gas

  3. Advancement in conductive cotton fabrics through in situ polymerization of polypyrrole-nanocellulose composites.

    Science.gov (United States)

    Hebeish, A; Farag, S; Sharaf, S; Shaheen, Th I

    2016-10-20

    Current research was undertaking with a view to innovate a new approach for development of conductive - coated textile materials through coating cotton fabrics with nanocellulose/polypyrrole composites. The study was designed in order to have a clear understanding of the role of nanocellulose as well as modified composite thereof under investigation. It is anticipated that incorporation of nanocellulose in the pyrrole/cotton fabrics/FeCl3/H2O system would form an integral part of the composites with mechanical, electrical or both properties. Three different nanocellulosic substrates are involved in the oxidation polymerization reaction of polypyrrole (Ppy) in presence of cotton fabrics. Polymerization was subsequently carried out by admixing at various ratios of FeCl3 and pyrrole viz. Ppy1, Ppy2 and pp3. The conductive, mechanical and thermal properties of cotton fabrics coated independently with different nanocellulose/polypyrrole were investigated. FTIR, TGA, XRD, SEM and EDX were also used for further characterization. Results signify that, the conductivity of cotton fabrics increases exponentially with increasing the dose of pyrrole and oxidant irrespective of nanocellulose substrate used. While, the mechanical properties of cotton fabrics are not significantly affected by the oxidant treatment. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. Synthesis, FT–IR characterization and crystal structure of aqua(5,10,15,20-tetraphenylporphyrinato-κ4Nmanganese(III trifluoromethanesulfonate

    Directory of Open Access Journals (Sweden)

    Wafa Harhouri

    2016-05-01

    Full Text Available In the title salt, [Mn(C44H28N4(H2O](CF3SO3 or [MnIII(TPP(H2O](CF3SO3 (where TPP is the dianion of 5,10,15,20-tetraphenylporphyrin, the MnIII cation is chelated by the four pyrrole N atoms of the porphyrinate anion and additionally coordinated by an aqua ligand in an apical site, completing the distorted square-pyramidal coordination environment. The average Mn—N(pyrrole bond length is 1.998 (9 Å and the Mn—O(aqua bond length is 2.1057 (15 Å. The central MnIII ion is displaced by 0.1575 (5 Å from the N4C20 mean plane of the porphyrinate anion towards the apical aqua ligand. The porphyrinate macrocycle exhibits a moderate ruffling and strong saddle deformations. In the crystal lattice, the [MnIII(TPP(H2O]+ cation and the trifluoromethanesulfonate counter-ions are arranged in alternating planes packed along [001]. The components are linked together through O—H...O hydrogen bonds and much weaker C—H...O and C—H...F interactions. The crystal packing is further stabilized by weak C—H...π interactions involving the pyrrole and phenyl rings of the porphyrin moieties.

  5. USE OF WOOD DERIVATIVES AS DOPING / DISPERSING AGENTS IN THE PREPARATION OF POLYPYRROLE AQUEOUS DISPERSIONS

    Directory of Open Access Journals (Sweden)

    Claudia Sasso

    2008-11-01

    Full Text Available Polystyrene sulfonic acid (PSS, lignosulfonic acid (LS sodium salts, and carboxymethylcellulose (CMC were used as doping/dispersing agents in the chemical polymerization of polypyrrole (Ppy. Conductivity measure-ments performed on dry Ppy pellets showed a sharp increase in conductivity when adding the anionic polymers to the polymerization liquor. For a polyanion/pyrrole weight ratio ranging between 0.1 and 0.6, the highest conductivity was given by PpyCMC (82 S/m and PpyPSS (80 S/m, followed by PpyLS (6 S/m. On the other hand, for a polyanion/pyrrole ratio higher than 0.6, the conductivity of PpyPSS systems sharply decreased, and for polyanion/pyrrole ratios higher than 1, the highest conductivity was given by PpyCMC (~10 S/m, followed by PpyLS (~7 S/m and PpyPSS (~5 S/m. Zeta-potential measurements showed that the surface charge of Ppy was strongly affected by the polyanion type and amount. Cationic Ppy particles were obtained in the presence of the two polymers bearing strongly acidic moieties (PSS and LS. Anionic PpyPSS colloids were obtained at the highest PSS/Py ratio, after the degradation of the conducting properties. When using a weakly acidic dopant (CMC, PpyCMC colloids had a negative charge for all of the tested conditions.

  6. Conducting polymers and hybrid nano-materials for electrochemical storage; Polymeres conducteurs electroniques et nanomateriaux hybrides pour le stockage de l'energie

    Energy Technology Data Exchange (ETDEWEB)

    Mallouki, M

    2006-02-15

    In this work, we report first on the preparation of nano-structures based on poly-pyrrole and iron oxide nano-particles by oxidative polymerisation of pyrrole in colloidal solution of Fe{sub 2}O{sub 3}. The conductivity and the morphology of nano-composites were studied and related to the doping agent role and the weight ratio (Fe{sub 2}O{sub 3}/PPy). The specific capacity measurement on the composite electrode (based on the nano-composite, acetylene black and binders) indicate a significant enhancement of charge storage for nano-composites compared to pure poly-pyrrole. Then, we investigated the synthesis and characterisation of composite electrode based on poly 3-methyl-thiophene (PMeT), which depend on different methods of preparation, electrolyte and doping potential. Finally, a room temperature ionic liquid (RTIL) such as imidazolium tri-fluoro-methane-sulfonimide (EMITFSI), was used and seem to be a promising electrolyte since it increases further the capacity with a high stability during charge-discharge processes. (author)

  7. Effect of composition on the stability and inhibitor response of jet fuels

    Energy Technology Data Exchange (ETDEWEB)

    Nixon, A C; Thorpe, R E

    1956-08-01

    The gas oil portion of jet fuels (that part boiling above 177/sup 0/C (350/sup 0/F)) was separated into compound type fractions by distillation followed by chromatography on silica gel and alumina. The separated fractions were analyzed chemically, by ultraviolet and infrared spectroscopy, and by mass spectrometry. The storage stability of the fractions were determined by aging them at 43/sup 0/C, 70/sup 0/C, or 100/sup 0/C, followed by measurement of the soluble and insoluble gum. The stability of each fraction was then related to the composition of that fraction. The saturate fractions were very stable and did not form gum. The aromatics fractions were fairly stable. Olefins, particularly conjugated diolefins, gave high soluble gum values but formed relatively little insoluble gum. Aromatic olefins were very reactive and produced large amounts of both soluble and insoluble gum. Thiophenes were very unstable toward formation of both soluble and insoluble gum. Nitrogen compounds isolated from the cracked gas oils were mainly nitrogen bases and pyrroles. When the nitrogen bases were blended with a saturate fraction, they had no effect on the stability of the saturates. However, pyrroles were very unstable; addition of pyrroles to a saturate fraction caused formation of large quantities of soluble and insoluble gum.

  8. Doping optimization of polypyrrole with toluenesulfonic acid using Box-Behnken design

    Energy Technology Data Exchange (ETDEWEB)

    Syed Draman, Sarifah Fauziah; Daik, Rusli [School of Chemical Sciences and Food Technology, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor (Malaysia); El-Sheikh, Said M. [Nanostructured Materials and Nanotechnology Division, Central Metallurgical Research and Development Institute,11421 Cairo (Egypt); Latif, Famiza Abdul [Faculty of Applied Sciences, Universiti Teknologi MARA Malaysia 40450 Shah Alam, Selangor (Malaysia)

    2013-11-27

    A three-level Box-Behnken design was employed in doping optimization of polypyrrole with toluenesulfonic acid (TSA-doped PPy). The material was synthesized via chemical oxidative polymerization using pyrrole, toluenesulfonic acid (TSA) and ammonium persulfate (APS) as monomer, dopant and oxidant, respectively. The critical factors selected for this study were concentration of dopant, molar ratio between dopant to monomer (pyrrole) and concentration of oxidant. Obtaining adequate doping level of TSA-doped PPy is crucial because it affects the charge carriers for doped PPy and usually be responsible for electronic mobility along polymeric chain. Furthermore, the doping level also affects other properties such as electrical and thermal conductivity. Doping level was calculated using elemental analysis. SEM images shows that the prepared TSA-doped PPy particles are spherical in shape with the diameters of about. The range of nanoparticles size is around 80-100 nm. The statistical analysis based on a Box–Behnken design showed that 0.01 mol of TSA, 1:1 mole ratio TSA to pyrrole and 0.25 M APS were the optimum conditions for sufficient doping level.

  9. Pyrrolizidine Alkaloid-Protein Adducts: Potential Non-invasive Biomarkers of Pyrrolizidine Alkaloid-Induced Liver Toxicity and Exposure.

    Science.gov (United States)

    Xia, Qingsu; Zhao, Yuewei; Lin, Ge; Beland, Frederick A; Cai, Lining; Fu, Peter P

    2016-08-15

    Pyrrolizidine alkaloids (PAs) are phytochemicals present in hundreds of plant species from different families widely distributed in many geographical regions around the world. PA-containing plants are probably the most common type of poisonous plants affecting livestock, wildlife, and humans. There have been many large-scale human poisonings caused by the consumption of food contaminated with toxic PAs. PAs require metabolic activation to generate pyrrolic metabolites to exert their toxicity. In this study, we developed a novel method to quantify pyrrole-protein adducts present in the blood. This method involves the use of AgNO3 in acidic ethanol to cleave the thiol linkage of pyrrole-protein (DHP-protein) adducts, and the resulting 7,9-di-C2H5O-DHP is quantified by HPLC-ES-MS/MS multiple reaction monitoring analysis in the presence of a known quantity of isotopically labeled 7,9-di-C2D5O-DHP internal standard. Using this method, we determined that diester-type PAs administered to rats produced higher levels of DHP-protein adducts than other types of PAs. The results suggest that DHP-protein adducts can potentially serve as minimally invasive biomarkers of PA exposure.

  10. Synthesis and characterization of DNA minor groove binding alkylating agents.

    Science.gov (United States)

    Iyer, Prema; Srinivasan, Ajay; Singh, Sreelekha K; Mascara, Gerard P; Zayitova, Sevara; Sidone, Brian; Fouquerel, Elise; Svilar, David; Sobol, Robert W; Bobola, Michael S; Silber, John R; Gold, Barry

    2013-01-18

    Derivatives of methyl 3-(1-methyl-5-(1-methyl-5-(propylcarbamoyl)-1H-pyrrol-3-ylcarbamoyl)-1H-pyrrol-3-ylamino)-3-oxopropane-1-sulfonate (1), a peptide-based DNA minor groove binding methylating agent, were synthesized and characterized. In all cases, the N-terminus was appended with an O-methyl sulfonate ester, while the C-terminus group was varied with nonpolar and polar side chains. In addition, the number of pyrrole rings was varied from 2 (dipeptide) to 3 (tripeptide). The ability of the different analogues to efficiently generate N3-methyladenine was demonstrated as was their selectivity for minor groove (N3-methyladenine) versus major groove (N7-methylguanine) methylation. Induced circular dichroism studies were used to measure the DNA equilibrium binding properties of the stable sulfone analogues; the tripeptide binds with affinity that is >10-fold higher than that of the dipeptide. The toxicities of the compounds were evaluated in alkA/tag glycosylase mutant E. coli and in human WT glioma cells and in cells overexpressing and under-expressing N-methylpurine-DNA glycosylase, which excises N3-methyladenine from DNA. The results show that equilibrium binding correlates with the levels of N3-methyladenine produced and cellular toxicity. The toxicity of 1 was inversely related to the expression of MPG in both the bacterial and mammalian cell lines. The enhanced toxicity parallels the reduced activation of PARP and the diminished rate of formation of aldehyde reactive sites observed in the MPG knockdown cells. It is proposed that unrepaired N3-methyladenine is toxic due to its ability to directly block DNA polymerization.

  11. Tracking the conversion of nitrogen during pyrolysis of antibiotic mycelial fermentation residues using XPS and TG-FTIR-MS technology.

    Science.gov (United States)

    Zhu, Xiangdong; Yang, Shijun; Wang, Liang; Liu, Yuchen; Qian, Feng; Yao, Wenqing; Zhang, Shicheng; Chen, Jianmin

    2016-04-01

    Antibiotic mycelial fermentation residues (AMFRs), which are emerging solid pollutants, have been recognized as hazardous waste in China since 2008. Nitrogen (N), which is an environmental sensitivity element, is largely retained in AMFR samples derived from fermentation substrates. Pyrolysis is a promising technology for the treatment of solid waste. However, the outcomes of N element during the pyrolysis of AMFRs are still unknown. In this study, the conversion of N element during the pyrolysis of AMFRs was tracked using XPS (X-ray photoelectron spectroscopy) and online TG-FTIR-MS (Thermogravimetry-Fourier transform infrared-Mass spectrometry) technology. In the AMFR sample, organic amine-N, pyrrolic-N, protein-N, pyridinic-N, was the main N-containing species. XPS results indicated that pyrrolic-N and pyridinic-N were retained in the AMFR-derived pyrolysis char. More stable species, such as N-oxide and quaternary-N, were also produced in the char. TG-FTIR-MS results indicated that NH3 and HCN were the main gaseous species, and their contents were closely related to the contents of amine-N and protein-N, and pyrrolic-N and pyridinic-N of AMFRs, respectively. Increases in heating rate enhanced the amounts of NH3 and HCN, but had less of an effect on the degradation degree of AMFRs. N-containing organic compounds, including amine-N, nitrile-N and heterocyclic-N, were discerned from the AMFR pyrolysis process. Their release range was extended with increasing of heating rate and carbon content of AMFR sample. This work will help to take appropriate measure to reduce secondary pollution from the treatment of AMFRs. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. The Porphobilinogen Conundrum in Prebiotic Routes to Tetrapyrrole Macrocycles

    Science.gov (United States)

    Taniguchi, Masahiko; Ptaszek, Marcin; Chandrashaker, Vanampally; Lindsey, Jonathan S.

    2017-03-01

    Attempts to develop a credible prebiotic route to tetrapyrroles have relied on enzyme-free recapitulation of the extant biosynthesis, but this process has foundered from the inability to form the pyrrole porphobilinogen ( PBG) in good yield by self-condensation of the precursor δ-aminolevulinic acid ( ALA). PBG undergoes robust oligomerization in aqueous solution to give uroporphyrinogen (4 isomers) in good yield. ALA, PBG, and uroporphyrinogen III are universal precursors to all known tetrapyrrole macrocycles. The enzymic formation of PBG entails carbon-carbon bond formation between the less stable enolate/enamine of one ALA molecule (3-position) and the carbonyl/imine (4-position) of the second ALA molecule; without enzymes, the first ALA reacts at the more stable enolate/enamine (5-position) and gives the pyrrole pseudo-PBG. pseudo-PBG cannot self-condense, yet has one open α-pyrrole position and is proposed to be a terminator of oligopyrromethane chain-growth from PBG. Here, 23 analogues of ALA have been subjected to density functional theoretical (DFT) calculations, but no motif has been identified that directs reaction at the 3-position. Deuteriation experiments suggested 5-(phosphonooxy)levulinic acid would react preferentially at the 3- versus 5-position, but a hybrid condensation with ALA gave no observable uroporphyrin. The results suggest efforts toward a biomimetic, enzyme-free route to tetrapyrroles from ALA should turn away from structure-directed reactions and focus on catalysts that orient the two aminoketones to form PBG in a kinetically controlled process, thereby avoiding formation of pseudo-PBG.

  13. Effects of Crystal Morphology on Singlet Exciton Fission in Diketopyrrolopyrrole Thin Films.

    Science.gov (United States)

    Hartnett, Patrick E; Margulies, Eric A; Mauck, Catherine M; Miller, Stephen A; Wu, Yilei; Wu, Yi-Lin; Marks, Tobin J; Wasielewski, Michael R

    2016-02-25

    Singlet exciton fission (SF) is a promising strategy for increasing photovoltaic efficiency, but in order for SF to be useful in solar cells, it should take place in a chromophore that is air-stable, highly absorptive, solution processable, and inexpensive. Unlike many SF chromophores, diketopyrrolopyrrole (DPP) conforms to these criteria, and here we investigate SF in DPP for the first time. SF yields in thin films of DPP derivatives, which are widely used in organic electronics and photovoltaics, are shown to depend critically on crystal morphology. Time-resolved spectroscopy of three DPP derivatives with phenyl (3,6-diphenylpyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione, PhDPP), thienyl (3,6-di(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione, TDPP), and phenylthienyl (3,6-di(5-phenylthiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione, PhTDPP) aromatic substituents in 100-200 nm thin films reveals that efficient SF occurs only in TDPP and PhTDPP (τSF = 220 ± 20 ps), despite the fact that SF is most exoergic in PhDPP. This result correlates well with the greater degree of π-overlap and closer π-stacking in TDPP (3.50 Å) and PhTDPP (3.59 Å) relative to PhDPP (3.90 Å) and demonstrates that SF in DPP is highly sensitive to the electronic coupling between adjacent chromophores. The triplet yield in PhTDPP films is determined to be 210 ± 35% by the singlet depletion method and 165 ± 30% by the energy transfer method, showing that SF is nearly quantitative in these films and that DPP derivatives are a promising class of SF chromophores for enhancing photovoltaic performance.

  14. Structural evidence for the partially oxidized dipyrromethene and dipyrromethanone forms of the cofactor of porphobilinogen deaminase: structures of the Bacillus megaterium enzyme at near-atomic resolution

    International Nuclear Information System (INIS)

    Azim, N.; Deery, E.; Warren, M. J.; Wolfenden, B. A. A.; Erskine, P.; Cooper, J. B.; Coker, A.; Wood, S. P.; Akhtar, M.

    2014-01-01

    The enzyme porphobilinogen deaminase (PBGD; hydroxymethylbilane synthase; EC 2.5.1.61) catalyses a key early step in the biosynthesis of tetrapyrroles in which four molecules of the monopyrrole porphobilinogen are condensed to form a linear tetrapyrrole. Two near-atomic resolution structures of PBGD from B. megaterium are reported that demonstrate the time-dependent accumulation of partially oxidized forms of the cofactor, including one that possesses a tetrahedral C atom in the terminal pyrrole ring. The enzyme porphobilinogen deaminase (PBGD; hydroxymethylbilane synthase; EC 2.5.1.61) catalyses an early step of the tetrapyrrole-biosynthesis pathway in which four molecules of the monopyrrole porphobilinogen are condensed to form a linear tetrapyrrole. The enzyme possesses a dipyrromethane cofactor, which is covalently linked by a thioether bridge to an invariant cysteine residue (Cys241 in the Bacillus megaterium enzyme). The cofactor is extended during the reaction by the sequential addition of the four substrate molecules, which are released as a linear tetrapyrrole product. Expression in Escherichia coli of a His-tagged form of B. megaterium PBGD has permitted the X-ray analysis of the enzyme from this species at high resolution, showing that the cofactor becomes progressively oxidized to the dipyrromethene and dipyrromethanone forms. In previously solved PBGD structures, the oxidized cofactor is in the dipyromethenone form, in which both pyrrole rings are approximately coplanar. In contrast, the oxidized cofactor in the B. megaterium enzyme appears to be in the dipyrromethanone form, in which the C atom at the bridging α-position of the outer pyrrole ring is very clearly in a tetrahedral configuration. It is suggested that the pink colour of the freshly purified protein is owing to the presence of the dipyrromethene form of the cofactor which, in the structure reported here, adopts the same conformation as the fully reduced dipyrromethane form

  15. A DFT study of volatile organic compounds adsorption on transition metal deposited graphene

    International Nuclear Information System (INIS)

    Kunaseth, Manaschai; Poldorn, Preeyaporn; Junkeaw, Anchalee; Meeprasert, Jittima; Rungnim, Chompoonut; Namuangruk, Supawadee; Kungwan, Nawee; Inntam, Chan; Jungsuttiwong, Siriporn

    2017-01-01

    Highlights: • VOCs removal via modified carbon-based adsorbent using density functional theory. • The single-vacancy defective graphene (SDG) with metal-deposited significantly increase the adsorption efficiency. • TM-doped SDG is a suitable adsorbent material for VOC removal. • Electron in hybridized sp"2-orbitals of heteroatoms has an effect on mode of adsorption. - Abstract: Recently, elevated global emission of volatile organic compounds (VOCs) was associated to the acceleration and increasing severity of climate change worldwide. In this work, we investigated the performance of VOCs removal via modified carbon-based adsorbent using density functional theory. Here, four transition metals (TMs) including Pd, Pt, Ag, and Au were deposited onto single-vacancy defective graphene (SDG) surface to increase the adsorption efficiency. Five prototypical VOCs including benzene, furan, pyrrole, pyridine, and thiophene were used to study the adsorption capability of metal-deposited graphene adsorbent. Calculation results revealed that Pd, Pt, Au, and Ag atoms and nanoclusters bind strongly onto the SDG surface. In this study, benzene, furan and pyrrole bind in the π-interaction mode using delocalized π-electron in aromatic ring, while pyridine and thiophene favor X- interaction mode, donating lone pair electron from heteroatom. In terms of adsorption, pyridine VOC adsorption strengths to the TM-cluster doped SDG surfaces are Pt_4 (−2.11 eV) > Pd_4 (−2.05 eV) > Ag_4 (−1.53 eV) > Au_4 (−1.87 eV). Our findings indicate that TM-doped SDG is a suitable adsorbent material for VOC removal. In addition, partial density of states analysis suggests that benzene, furan, and pyrrole interactions with TM cluster are based on p-orbitals of carbon atoms, while pyridine and thiophene interactions are facilitated by hybridized sp"2-orbitals of heteroatoms. This work provides a key insight into the fundamentals of VOCs adsorption on carbon-based adsorbent.

  16. Conductometry and Size Characterization of Polypyrrole Nanoparticles Produced by Ball Milling

    OpenAIRE

    Abbasi, Abdul Malik Rehan; Marsalkova, Miroslava; Militky, Jiri

    2013-01-01

    Polypyrrole (PPy), one of the most extensively investigated conducting polymers, has attracted a great deal of interest because of its good electrical conductivity, environmental stability, and easy synthesis. PPy films were produced by polymerization of pyrrole and tosylate (TsO−) as dopants in the presence of oxidant FeCl3 and polyethylene glycol (Mw 8000) at −5°C for 48 h. High energy milling was carried out at 850 rpm in the dry media with the balls of 10 mm. Particles were then character...

  17. A new reactivity mode for the diazo group: diastereoselective 1,3-aminoalkylation reaction of β-amino-α-diazoesters to give triazolines.

    Science.gov (United States)

    Kuznetsov, Alexey; Gulevich, Anton V; Wink, Donald J; Gevorgyan, Vladimir

    2014-08-18

    A novel mode of reactivity for the diazo group, the 1,3-addition of a nucleophile and an electrophile to the diazo group, has been realized in the intramolecular aminoalkylation of β-amino-α-diazoesters to form tetrasubstituted 1,2,3-triazolines. The reaction exhibited a broad scope, good functional group tolerance, and excellent diastereoselectivity. In addition, a new Au-catalyzed intramolecular transannulation reaction of the obtained propargyl triazolines to give pyrroles has been discovered. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Iodine-catalyzed diazo activation to access radical reactivity.

    Science.gov (United States)

    Li, Pan; Zhao, Jingjing; Shi, Lijun; Wang, Jin; Shi, Xiaodong; Li, Fuwei

    2018-05-17

    Transition-metal-catalyzed diazo activation is a classical way to generate metal carbene, which are valuable intermediates in synthetic organic chemistry. An alternative iodine-catalyzed diazo activation is disclosed herein under either photo-initiated or thermal-initiated conditions, which represents an approach to enable carbene radical reactivity. This metal-free diazo activation strategy were successfully applied into olefin cyclopropanation and epoxidation, and applying this method to pyrrole synthesis under thermal-initiated conditions further demonstrates the unique reactivity using this method over typical metal-catalyzed conditions.

  19. Synthesis and properties of novel TEMPO-contained polypyrrole derivatives as the cathode material of organic radical battery

    International Nuclear Information System (INIS)

    Xu, Lihuan; Yang, Fang; Su, Chang; Ji, Lvlv; Zhang, Cheng

    2014-01-01

    Two 2,2,6,6-tetramethylpiperidinyl-N-oxy (TEMPO) contained polypyrrole (PPy) derivatives with the different side-chain length were synthesized by esterification of 4-hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl free radial with pyrrole butyric acid and pyrrole caproic acid. Then the homopolymers of 4-(3-(Pyrrol-1-yl)butyryloxy)-2,2,6,6-tetramethylpiperidin-1-yloxy (PPy-B-TEMPO) and 4-(3-(Pyrrol-1-yl)hexanoyloxy)-2,2,6,6-tetramethylpiperidin-1-yloxy (PPy-C-TEMPO) were prepared by chemical oxidative polymerization. The structure, morphology, electrochemical properties of prepared polymers were characterized by fourier transform infrared spectroscopy (FTIR), ultraviolet visible spectroscopy (UV-vis), scanning electron microscopy (SEM), cyclic voltammograms (CV) and electrochemical impedance spectra (EIS), respectively. Also, the charge-discharge properties of the prepared polymers were studied by galvanostatic charge-discharge testing. The results demonstrated that the as-synthesized nitroxide radical polymers showed a reversible two-electron redox reaction process in the potential limits of 2.5–3.0 V and 3.4–3.8 V vs Li/Li + , respectively. Under our experimental conditions, PPy only presented the discharge capacity of 16.5 mAh·g −1 at 20 mA·g −1 between 2.5 and 4.2 V, while PPy-B-TEMPO with the short side-chain linked to TEMPO groups exhibited an initial discharge capacity of up to 86.5 mAh·g −1 with two well-defined plateaus. Furthermore, the PPy-C-TEMPO with the longer linking side-chain even displayed a discharge capacity of 115 mAh·g −1 . These superior electrochemical performances were ascribed to the flexible linking side-chain and the introduction of stable conductive PPy main chain, which benefits the improvement of charge carrier transportation in the aggregated polymer bulk

  20. Biodegradation of NSO-compounds under different redox-conditions

    DEFF Research Database (Denmark)

    Dyreborg, S.; Arvin, E.; Broholm, K.

    1997-01-01

    Laboratory experiments were carried out to investigate the potential of groundwater microorganisms to degrade selected heterocyclic aromatic compounds containing nitrogen, sulphur, or oxygen (NSO-compounds) under four redox-conditions over a period of 846 days. Eight compounds (pyrrole, 1...... anaerobic conditions, even though the microorganisms present in the anaerobic microcosms were active throughout the incubation period. A high variability in the lag period among the NSO-compounds was observed under aerobic conditions. While quinoline, indole, and carbazole were degraded with a lag period...

  1. Imagenology of the bio integration of polymers synthesized by plasma in pith tissue

    International Nuclear Information System (INIS)

    Morales, J.; Olayo, R.; Escalona, A.; Morales, A.; Mondragon, R.; Diaz, A.; Rios, C.; Salgado, H.; Cruz, G.; Olayo, M.G.

    2007-01-01

    The general characteristics of the bio integration of pyrrole derived polymers in spinal marrows with traumatic lesions are evaluated by visual mediums. Histological images of spinal marrow tinted by the Eosin/Hematoxyline technique are used and images obtained by computerized axial tomography and nuclear magnetic resonance with those that are carried out some three-dimensional reconstructions of the injured area. It intends an algorithm that relates the area of the bottom-tissue relationship with the sum of the tissue areas and of the implanted polymer. Some computational procedures for segmentation of spinal marrow on the integration of the polymer to the tissue of the injured marrow are presented. (Author)

  2. Uniform silver/polypyrrole core-shell nanoparticles synthesized by hydrothermal reaction

    Energy Technology Data Exchange (ETDEWEB)

    Wang Shibin [Department of Chemistry, Tsinghua University, Beijing 100084 (China); Shi Gaoquan [Department of Chemistry, Tsinghua University, Beijing 100084 (China)]. E-mail: gshi@tsinghua.edu.cn

    2007-04-15

    Uniformly sized silver/polypyrrole (Ag/PPy) core-shell nanoparticles were synthesized by one-step hydrothermal reaction of pyrrole and silver nitrate in the presence of polyvinyl pyrrolidone (PVP) as protection agent. The morphology and structures of the nanoparticles have been studied by scanning and transmission electronic microscopes, X-ray diffractometer and Raman spectroscopy. The experimental results indicated that the particles had 120 nm silver cores with 20 nm polypyrrole (PPy) coatings. The reaction conditions have strong effects on the morphology of the nanoparticles.

  3. Uniform silver/polypyrrole core-shell nanoparticles synthesized by hydrothermal reaction

    International Nuclear Information System (INIS)

    Wang Shibin; Shi Gaoquan

    2007-01-01

    Uniformly sized silver/polypyrrole (Ag/PPy) core-shell nanoparticles were synthesized by one-step hydrothermal reaction of pyrrole and silver nitrate in the presence of polyvinyl pyrrolidone (PVP) as protection agent. The morphology and structures of the nanoparticles have been studied by scanning and transmission electronic microscopes, X-ray diffractometer and Raman spectroscopy. The experimental results indicated that the particles had 120 nm silver cores with 20 nm polypyrrole (PPy) coatings. The reaction conditions have strong effects on the morphology of the nanoparticles

  4. Electrochemical fabrication of nanoporous polypyrrole thin films

    International Nuclear Information System (INIS)

    Li Mei; Yuan Jinying; Shi Gaoquan

    2008-01-01

    Polypyrrole thin films with pores in nanometer scale were synthesized by direct electrochemical oxidation of pyrrole in a mixed electrolyte of isopropyl alcohol, boron trifluoride diethyl etherate, sodium dodecylsulfonate and poly(ethylene glycol) using well-aligned ZnO nanowires arrays as templates. The thin films exhibit high conductivity of ca. σ rt ∼ 20.5 s/cm and can be driven to bend during redox processes in 1.0 M lithium perchlorate aqueous solution. The movement rate of an actuator based on this nanoporous film was measured to be over 90 o /s at a driving potential of 0.8 V (vs. Ag/AgCl)

  5. A novel ZnO@Ag@Polypyrrole hybrid composite evaluated as anode material for zinc-based secondary cell

    OpenAIRE

    Jianhang Huang; Zhanhong Yang; Zhaobin Feng; Xiaoe Xie; Xing Wen

    2016-01-01

    A novel ZnO@Ag@Polypyrrole nano-hybrid composite has been synthesized with a one-step approach, in which silver-ammonia complex ion serves as oxidant to polymerize the pyrrole monomer. X-ray diffraction (XRD) and infrared spectroscopy (IR) show the existence of metallic silver and polypyrrole. The structure of nano-hybrid composites are characterized by scanning electron microscope (SEM) and transmission electron microscope (TEM), which demonstrates that the surface of ZnO is decorated with n...

  6. Imagenology of the bio integration of polymers synthesized by plasma in pith tissue; Imagenologia de la biointegracion de polimeros sintetizados por plasma en tejido de medula espinal

    Energy Technology Data Exchange (ETDEWEB)

    Morales, J.; Olayo, R. [Departamento de Fisica, Universidad Autonoma Metropolitana Iztapalapa. 09340 Mexico D.F. (Mexico); Escalona, A.; Morales, A.; Mondragon, R. [Departamento de Ingeniera Electrica, Universidad Autonoma Metropolitana Iztapalapa. 09340 Mexico D.F. (Mexico); Diaz, A.; Rios, C. [Departamento de Neuroquimica, Instituto Nacional de Neurologia y Neurocirugia Manuel Velasco Suarez S.S.A., Mexico D.F. (Mexico); Salgado, H. [Unidad de Investigacion Medica en Enfermedades Neurologicas, Hospital de Especialidades, Centro Medico Nacional Siglo XXI, Mexico D.F. (Mexico); Cruz, G.; Olayo, M.G. [ININ, 52750 La Marquesa, Estado de Mexico (Mexico)]. e-mail: jmor@xanum.uam.mx

    2007-07-01

    The general characteristics of the bio integration of pyrrole derived polymers in spinal marrows with traumatic lesions are evaluated by visual mediums. Histological images of spinal marrow tinted by the Eosin/Hematoxyline technique are used and images obtained by computerized axial tomography and nuclear magnetic resonance with those that are carried out some three-dimensional reconstructions of the injured area. It intends an algorithm that relates the area of the bottom-tissue relationship with the sum of the tissue areas and of the implanted polymer. Some computational procedures for segmentation of spinal marrow on the integration of the polymer to the tissue of the injured marrow are presented. (Author)

  7. Automatic Determination of the Size of Elliptical Nanoparticles from AFM Images

    Czech Academy of Sciences Publication Activity Database

    Sedlář, Jiří; Zitová, Barbara; Kopeček, Jaromír; Flusser, Jan; Todorcius, T.; Kratochvílová, Irena

    2013-01-01

    Roč. 15, č. 8 (2013), s. 1-10 ISSN 1388-0764 R&D Projects: GA ČR GAP103/11/1552; GA ČR(CZ) GAP304/10/1951; GA TA ČR TA01011165 Institutional support: RVO:67985556 ; RVO:68378271 Keywords : Atomic force microscopy * Image moments * Pyrrole derivatives * Size determination * Watershed segmentation Subject RIV: JD - Computer Applications, Robotics; BM - Solid Matter Physics ; Magnetism (FZU-D) Impact factor: 2.278, year: 2013 http://library.utia.cas.cz/separaty/2013/ZOI/sedlar-0394390.pdf

  8. Properties of polypyrrole doped with alkylbenzene sulfonates

    DEFF Research Database (Denmark)

    Bay, Lasse; Skaarup, Steen; West, Keld

    2001-01-01

    -standing 10 mu m thick film is prepared electrochemically at a constant current from an aqueous solution of pyrrole and sodium alkylbenzene sulfonate. The mechanical properties of the film (tensile strength and Young's modulus) and the reversible linear elongation between the oxidised and reduced states...... are measured. Alkylbenzene sulfonates with alkyl chain lengths between 1 and 22 carbon atoms are used as dopant anion. The films made with the different anions have highly different properties and are here compared to outline the influence of the size of the anion. A maximum in linear elongation is found for p......-(n-octyl)benzene sulfonate and in conductivity for p-(n-butyl)benzene sulfonate....

  9. Thermally switchable dielectrics

    Science.gov (United States)

    Dirk, Shawn M.; Johnson, Ross S.

    2013-04-30

    Precursor polymers to conjugated polymers, such as poly(phenylene vinylene), poly(poly(thiophene vinylene), poly(aniline vinylene), and poly(pyrrole vinylene), can be used as thermally switchable capacitor dielectrics that fail at a specific temperature due to the non-conjugated precursor polymer irreversibly switching from an insulator to the conjugated polymer, which serves as a bleed resistor. The precursor polymer is a good dielectric until it reaches a specific temperature determined by the stability of the leaving groups. Conjugation of the polymer backbone at high temperature effectively disables the capacitor, providing a `built-in` safety mechanism for electronic devices.

  10. Lewis acid catalyzed [3 + 2] annulation of ketenimines with donor-acceptor cyclopropanes: an approach to 2-alkylidenepyrrolidine derivatives.

    Science.gov (United States)

    Alajarin, Mateo; Egea, Adrian; Orenes, Raul-Angel; Vidal, Angel

    2016-11-02

    The [3 + 2] annulation reaction of C,C,N-trisubstituted ketenimines with donor-acceptor cyclopropanes bearing aryl, styryl and vinyl substituents at the C2 position, triggered by the Lewis acid Sc(OTf) 3 , supplies highly substituted pyrrolidines. Activated cyclopropanes fused to naphthalene and [1]benzopyrane nuclei are also suitable substrates in similar transformations, yielding partially saturated benz[g]indoles and [1]benzopyran[4,3-b]pyrroles. An intramolecular version of this ketenimine/cyclopropane [3 + 2] annulation has also been developed leading to the pyrrolo[2,1-a]isoindole framework.

  11. Monitoring of blood oxygenation in brain by resonance Raman spectroscopy

    DEFF Research Database (Denmark)

    Brazhe, Nadezda A; Thomsen, Kirsten; Lønstrup, Micael

    2018-01-01

    Blood oxygenation in cerebral vessels is an essential parameter to evaluate brain function and to investigate the coupling between local blood flow and neuronal activity. We apply resonance Raman spectroscopy in vivo to study hemoglobin oxygenation in cortex vessels of anesthetized ventilated mice....... We demonstrate that the pairs of Raman peaks at 1355 and1375 cm-1(symmetric vibrations of pyrrol half-rings in the heme molecule), 1552 and 1585 cm-1and 1602 and 1638 cm-1(vibrations of methine bridges in heme molecule) are reliable markers for quantitative estimation of the relative amount...

  12. Surface characterization of adsorbed asphaltene on a stainless steel surface

    International Nuclear Information System (INIS)

    Abdallah, W.A.; Taylor, S.D.

    2007-01-01

    X-ray photoelectron spectroscopy was used to characterize a single layer of adsorbed asphaltene on a metallic surface. The deposits were created by immersing a stainless steel disc into a dilute asphaltene solution with either toluene or dichloromethane as the solvent, although the toluene solution allowed for better control of the adsorbed asphaltene layer and less atmospheric oxygen contamination. The analyses for C 1s, S 2p 3/2 , N 1s and O 1s photoemission peaks indicated that different functional groups are present in the asphaltene layer including carboxylic, pyrrolic, pyridininc, thiophenic and sulfite, with slight differences in their binding energies

  13. Partial dissociative emission cross sections and product state distributions of the resulting photofragments

    Energy Technology Data Exchange (ETDEWEB)

    Picconi, David; Grebenshchikov, Sergy Yu., E-mail: Sergy.Grebenshchikov@ch.tum.de

    2016-12-20

    This paper relates the partial cross section of a continuous optical emission into a given scattering channel of the lower electronic state to the photofragment population. This allows one to infer partial emission cross sections ‘non-optically’ from product state distributions; in computations, explicit construction of exact scattering states is therefore avoided. Applications to the emission spectra of NaI, CO{sub 2}, and pyrrole are given. It is also demonstrated that a similar relationship holds between partial cross sections of dissociative photoionization and distributions of ionic fragments over final product channels.

  14. Time-dependent density functional theory description of total photoabsorption cross sections

    Science.gov (United States)

    Tenorio, Bruno Nunes Cabral; Nascimento, Marco Antonio Chaer; Rocha, Alexandre Braga

    2018-02-01

    The time-dependent version of the density functional theory (TDDFT) has been used to calculate the total photoabsorption cross section of a number of molecules, namely, benzene, pyridine, furan, pyrrole, thiophene, phenol, naphthalene, and anthracene. The discrete electronic pseudo-spectra, obtained in a L2 basis set calculation were used in an analytic continuation procedure to obtain the photoabsorption cross sections. The ammonia molecule was chosen as a model system to compare the results obtained with TDDFT to those obtained with the linear response coupled cluster approach in order to make a link with our previous work and establish benchmarks.

  15. New strategy and easy fabrication of solid-state supercapacitor based on polypyrrole and nitrile rubber.

    Science.gov (United States)

    Lee, Sangyool; Lee, Youngkwan; Cho, Mi-Suk; Nam, Jae-Do

    2008-09-01

    Solid state redox supercapacitors were fabricated using a solid polymer electrolyte, nitrile butadiene rubber (NBR)-KCI and chemically deposited polypyrrole (PPy) as the conducting polymer electrodes on both surfaces of a NBR film. The optimal conditions for the preparation of the PPy/NBR electrode were confirmed as functions of the uptake of pyrrole monomer into the NBR matrix as well as the immersion time in an oxidant solution. The morphology of the PPy-NBR-KCI capacitor was observed using scanning electron microscopy. The performance of the capacitors was characterized using a galvanostatic charge-discharge technique.

  16. Multifaceted Strategy for the Synthesis of Diverse 2,2'-Bithiophene Derivatives

    Directory of Open Access Journals (Sweden)

    Stanisław Krompiec

    2015-03-01

    Full Text Available New catalytically or high pressure activated reactions and routes, including coupling, double bond migration in allylic systems, and various types of cycloaddition and dihydroamination have been used for the synthesis of novel bithiophene derivatives. Thanks to the abovementioned reactions and routes combined with non-catalytic ones, new acetylene, butadiyne, isoxazole, 1,2,3-triazole, pyrrole, benzene, and fluoranthene derivatives with one, two or six bithiophenyl moieties have been obtained. Basic sources of crucial substrates which include bithiophene motif for catalytic reactions were 2,2'-bithiophene, gaseous acetylene and 1,3-butadiyne.

  17. Unusual Intramolecular Hydrogen Transfer in 3,5-Di(triphenylethylenyl) BODIPY Synthesis and 1,2-Migratory Shift in Subsequent Scholl Type Reaction

    KAUST Repository

    Chua, Ming Hui; Huang, Kuo-Wei; Xu, Jianwei; Wu, Jishan

    2015-01-01

    The straightforward synthesis of 3,5-di(triphenylethylenyl) BODIPYs 1–3 from the condensation of 2-(triphenylethylenyl) pyrrole with aryl aldehydes are surprisingly found to produce side products that are hydrogenated at one of the two triphenylethylene substituents. It was also observed that the subsequent Scholl type reaction of 1 resulted in a “1,2-migratory shift” of one triphenylethylene substituent in addition to a ring closing reaction. Preliminary investigations, including DFT calculations and isolation of intermediates, were conducted to study these unusual observations on BODIPY chemistry.

  18. Incorporating catechol into electroactive polypyrrole nanowires on titanium to promote hydroxyapatite formation

    Directory of Open Access Journals (Sweden)

    Zhengao Wang

    2018-03-01

    Full Text Available To improve the osteointegration property of biomedical titanium, nano-architectured electroactive coating was synthesized through the electrochemical polymerization of dopamine and pyrrole. The highly binding affinity of Ca2+ to the catechol moiety of doped dopamine enabled efficient interaction between polypyrrole/polydopamine nanowires and mineral ions. The results indicate that the PPy/PDA nanowires preserved its efficient electro-activity and accelerated the hydroxyapatite deposition in a simulated body fluid. The PPy/PDA nanowires coating could be applied to promote the osteointegration of titanium implant.

  19. Alkaloids from sponge, scaffolds for the inhibition of human immunodeficiency virus (hiv)

    KAUST Repository

    O'Rourke, Aubrie

    2016-05-06

    Anti-viral compounds with low cytotoxicity are identified from screening of products found in Red Sea sponges, including the sponge Stylissa carteri. The identified compounds can be brominated pyrrole-2- aminoimidazole alkaloids and derivatives thereof. Specific examples of identified compounds include oroidin, hymenialdisine, and debromohymenialdisine, as well as derivatives thereof. The compounds also can be useful scaffolds or pharmacores for further chemical modification and derivatization. Selected compounds, particularly oroidin, show selective anti-viral HIV-1 activity coupled with reduced cytotoxicity. The compounds can function as HIV reverse-transcriptase inhibitors, and molecular modeling can be used to confirm inhibition.

  20. Solid state supramolecular structure of diketopyrrolopyrrole chromophores: correlating stacking geometry with visible light absorption

    OpenAIRE

    Pop, Flavia; Lewis, William; Amabilino, David B.

    2016-01-01

    Mono- and di-alkylated 1,4-diketo-3,6-dithiophenylpyrrolo[3-4-c]pyrrole derivatives (TDPPs) have been synthesised and their solid state packing and absorption properties have been correlated. In this library of compounds the bulkier substituents distort the geometry of the chromophores and shift the lowest energy absorption band as a consequence of reduced π–π stacking and inter-chromophore overlap. Longitudinal displacement of the conjugated core is affected by donor–acceptor intermolecular ...