Morphology and composition of pyrotechnic residues formed at different levels of confinement

NARCIS (Netherlands)

Vermeij, E.; Duvalois, W.; Webb, R.; Koeberg, M.

2009-01-01

Post explosion residues (PER) are residues from pyrotechnic compositions or explosives that are generated during an explosion. In the recent past SEM/EDX was used several times to analyze PER from pyrotechnic compositions. The results from these studies suggest that there might be a difference in

78 FR 26690 - Hours of Service (HOS) of Drivers; Application for Renewal and Expansion of American Pyrotechnics...

Science.gov (United States)

2013-05-07

... Association (APA) Exemption From the 14-Hour Rule During Independence Day Celebrations AGENCY: Federal Motor... exemption; request for comments. SUMMARY: The American Pyrotechnics Association (APA) has requested a renewal of its exemption for 48 APA member-companies from FMCSA's regulation that drivers of commercial...

Illicit utilization of arsenic compounds in pyrotechnics? An analysis of the suspended particle emission during Vienna’s New Year fireworks

International Nuclear Information System (INIS)

Sterba, J.H.; Georg Steinhauser; Fritz Grass

2013-01-01

In the course of an investigation of an electrostatic precipitation technique as a sampling method for airborne dust particles, elevated concentrations of As were found in the data collected during New Years Eve celebrations in Vienna. The original study confirmed the applicability of the new sampling device as a useful sampling method, showing elevated values for the elements Na, Mg, Al, Si, S, K, Cu, As, Br, Rb, Sr, Sb, Te and Ba, all associated with the use of pyrotechnics. The measured values for As could not be explained as a impurity in some other substances used. Thus, several unburned pyrotechnic products were investigated to find the source of As in the dust collected. The results showed only one product with higher than expected As contents (1.4 μg g -1 ), leading to the assumption of intentional - but illicit - use of arsenic compounds in pyrotechnics as a colouring agent for the production of blue light. (author)

76 FR 37876 - Hours of Service (HOS) of Drivers; Renewal of American Pyrotechnics Association (APA) Exemption...

Science.gov (United States)

2011-06-28

...-28043] Hours of Service (HOS) of Drivers; Renewal of American Pyrotechnics Association (APA) Exemption... announces the renewal of the exemption of specified members of the American Pyrotechnics Association (APA... of this exemption in effect, designated APA-member motor carriers will maintain a level of safety...

77 FR 38378 - Hours of Service (HOS) of Drivers; Revision of Exemption; American Pyrotechnics Association (APA)

Science.gov (United States)

2012-06-27

...-28043] Hours of Service (HOS) of Drivers; Revision of Exemption; American Pyrotechnics Association (APA... Pyrotechnics Association (APA) that were granted an exemption from FMCSA's prohibition on driving commercial...-July 8, inclusive, in 2011 and 2012. The exemption covered renewal of 53 APA-member motor carriers and...

Towards decomposition of live chemical agents by pyrotechnic mixtures

NARCIS (Netherlands)

Bouma, R.H.B.; Noort, D.

2012-01-01

The aim of this study is to contribute to improved EOD neutralisation techniques against improvised explosive devices (IEDs) containing chemical agents. The decomposition of dimethyl methylphosphonate (DMMP) when exposed to a burning aluminum/potassium nitrate pyrotechnic mixture is studied

Supercritical water oxidation of colored smoke, dye, and pyrotechnic compositions. Final report: Pilot plant conceptual design

Energy Technology Data Exchange (ETDEWEB)

LaJeunesse, C.A.; Chan, Jennifer P.; Raber, T.N.; Macmillan, D.C.; Rice, S.F.; Tschritter, K.L.

1993-11-01

The existing demilitarization stockpile contains large quantities of colored smoke, spotting dye, and pyrotechnic munitions. For many years, these munitions have been stored in magazines at locations within the continental United States awaiting completion of the life-cycle. The open air burning of these munitions has been shown to produce toxic gases that are detrimental to human health and harmful to the environment. Prior efforts to incinerate these compositions have also produced toxic emissions and have been unsuccessful. Supercritical water oxidation (SCWO) is a rapidly developing hazardous waste treatment method that can be an alternative to incineration for many types of wastes. The primary advantage SCWO affords for the treatment of this selected set of obsolete munitions is that toxic gas and particulate emissions will not occur as part of the effluent stream. Sandia is currently designing a SCWO reactor for the US Army Armament Research, Development & Engineering Center (ARDEC) to destroy colored smoke, spotting dye, and pyrotechnic munitions. This report summarizes the design status of the ARDEC reactor. Process and equipment operation parameters, process flow equations or mass balances, and utility requirements for six wastes of interest are developed in this report. Two conceptual designs are also developed with all process and instrumentation detailed.

Ignition and combustion of pyrotechnics at low pressures and at temperature extremes

Directory of Open Access Journals (Sweden)

Clive Woodley

2017-06-01

Full Text Available Rapid and effective ignition of pyrotechnic countermeasure decoy flares is vitally important to the safety of expensive military platforms such as aircraft. QinetiQ is conducting experimental and theoretical research into pyrotechnic countermeasure decoy flares. A key part of this work is the development and application of improved models to increase the understanding of the ignition processes occurring for these flares. These models have been implemented in a two-dimensional computational model and details are described in this paper. Previous work has conducted experiments and validated the computational model at ambient temperature and pressure. More recently the computational model has been validated at pressures down to that equivalent to 40,000 feet but at ambient temperature (∼290 K. This paper describes further experimental work in which the ignition delays of the priming material in inert countermeasure decoy flares were determined for pressures down to 40,000 feet and at temperature extremes of −40 °C and 100 °C. Also included in this paper is a comparison of the measured and predicted ignition delays at low pressures and temperature extremes. The agreement between the predicted and measured ignition delays is acceptable.

Low hygroscopicity of ambient fresh carbonaceous aerosols from pyrotechnics smoke

Science.gov (United States)

Carrico, Christian M.; Gomez, Samantha L.; Dubey, Manvendra K.; Aiken, Allison C.

2018-04-01

Pyrotechnics (fireworks) displays are common for many cultures worldwide, with Independence Day celebrations occurring annually on July 4th as the most notable in the U.S. Given an episodic nature, fireworks aerosol properties are poorly characterized. Here we report observations of optical properties of fresh smoke emissions from Independence Day fireworks smoke sampled at Los Alamos National Laboratory, New Mexico U.S.A. on 4-5 July 2016. Aerosol optical properties were measured with a photoacoustic extinctiometer (PAX, DMT, Inc., Model 870 nm) at low RH laboratory testing with ground-level sparklers showed that pyrotechnics smoke can generate a strong hygroscopic response, however. As confirmed with chemical analysis, the chemistry of the fireworks was key to defining the hygroscopic response. Sparkler smoke was dominated by salt species such as hygroscopic potassium chloride while it lacked the black powder explosives in aerial fireworks that contribute organic and elemental carbon to its non-hygroscopic smoke.

Studies on the ageing of a magnesium-strontium nitrate pyrotechnic composition using isothermal microcalorimetry and thermal analysis techniques

International Nuclear Information System (INIS)

Tuukkanen, I.; Brown, S.D.; Charsley, E.L.; Goodall, S.J.; Rooney, J.J.; Griffiths, T.T.; Lemmetyinen, H.

2004-01-01

The ageing behaviour of a pyrotechnic composition containing equal parts by mass of magnesium and strontium nitrate has been followed by isothermal microcalorimetry. The measurements were carried out on the samples at 50 deg. C and 65% relative humidity in air using closed ampoules. The results have been compared to those obtained for magnesium powder under the same conditions. Following an initial induction period, the pyrotechnic compositions reacted at a much faster rate than magnesium powder alone. The main reaction products were found to be magnesium hydroxide and strontium nitrite; the amounts formed have been correlated with the cumulative heats of ageing. In addition, the influence of the ageing process on the pyrotechnic reaction has been studied by high temperature differential scanning calorimetry (DSC) and by modulated temperature DSC

Combustion of powdery tungsten in pyrotechnic mixtures

International Nuclear Information System (INIS)

Ivanov, G.V.; Reshetov, A.A.; Viktorenko, A.M.; Surkov, V.G.; Karmadonov, L.N.

1982-01-01

The basic regularities of tungsten burning (powder 2-5 μm) with oxidizers most typical for pyrotechnics: nitrates, lead and barium peroxides (powder, 2-8 μm) and potassium perchlorate (powder, 2-8 μm) are studied. Dependences of burning rate as a function of pressure and ratio of components are established. It is supposed that tungsten burning in mixtures with the mentioned nitrates is a complex and multistage process the rate of which is determined by tungsten dissolution in nitrate melts. Analysis of burning products using available methods is complex

Laser-generated shock wave attenuation aimed at microscale pyrotechnic device design

Directory of Open Access Journals (Sweden)

Hyeonju Yu

2016-05-01

Full Text Available To meet the rising demand for miniaturizing the pyrotechnic device that consists of donor/acceptor pair separated by a bulkhead or a thin gap, the shock initiation sensitivity in the microscale gap test configuration is investigated. For understanding the shock attenuation within a gap sample (304 stainless steel thickness of 10∼800 μm, the laser-generated shock wave in water confinement is adopted. The shock properties are obtained from the free surface velocity by making use of a velocity interferometer system for any reflector (VISAR. Analytical models for plasma generation in a confined geometry and for evolution and decay of shock waves during the propagation are considered. The shape and amplitude of the laser-driven initial pressure load and its attenuation pattern in the gap are effectively controlled for targeting the microscale propagation distance and subsequent triggering pressure for the acceptor charge. The reported results are important in the precise controlling of the shock strength during the laser initiation of microscale pyrotechnic devices.

Implications of Dynamic Pressure Transducer Mounting Variations on Measurements in Pyrotechnic Test Apparatus

Science.gov (United States)

Dibbern, Andreas; Crisafulli, Jeffrey; Hagopia, Michael; McDougle, Stephen H.; Saulsberry, Regor L.

2009-01-01

Accurate dynamic pressure measurements are often difficult to make within small pyrotechnic devices, and transducer mounting difficulties can cause data anomalies that lead to erroneous conclusions. Delayed initial pressure response followed by data ringing has been observed when using miniaturized pressure transducer mounting adapters required to interface transducers to small test chambers. This delayed pressure response and ringing, combined with a high data acquisition rate, has complicated data analysis. This paper compares the output signal characteristics from different pressure transducer mounting options, where the passage distance from the transducer face to the pyrotechnic chamber is varied in length and diameter. By analyzing the data and understating the associated system dynamics, a more realistic understanding of the actual dynamic pressure variations is achieved. Three pressure transducer mounting configurations (elongated, standard, and face/flush mount) were simultaneously tested using NASA standard initiators in closed volume pressure bombs. This paper also presents results of these pressure transducer mounting configurations as a result of a larger NASA Engineering and Safety Center pyrovalve test project. Results from these tests indicate the improved performance of using face/flush mounted pressure transducers in this application. This type of mounting improved initial pressure measurement response time by approximately 19 s over standard adapter mounting, eliminating most of the lag time; provided a near step-function type initial pressure increase; and greatly reduced data ringing in high data acquisition rate systems. The paper goes on to discuss other issues associated with the firing and instrumentation that are important for the tester to understand.

Influence of interface conditions on laser diode ignition of pyrotechnic mixtures: application to the design of an ignition device

Energy Technology Data Exchange (ETDEWEB)

Opdebeck, Frederic; Gillard, Philippe [Laboratoire Energetique Explosions et Structures de l' Universite d' Orleans, 63 boulevard de Lattre de Tassigny, 18020 cedex, Bourges (France); Radenac, D' Erwann [Laboratoire de combustion et de detonique, ENSMA, BP 109, 86960 cedex, Futuroscope (France)

2003-01-01

This paper treats of numerical modelling which simulates the laser ignition of pyrotechnic mixtures. The computation zone is divided into two fields. The first is used to take account of the heat loss with the outside. It can represent an optical fibre or a sapphire protective porthole. The second field represents the reactive tablet which absorbs the laser diode's beam. A specific feature of the model is that it incorporates a thermal contact resistance R{sub c} between the two computation fields. Through knowledge of the thermal, optical and kinetic properties, this code makes it possible to compute the ignition conditions. The latter are defined by the energy E{sub 50} and the time t{sub i} of ignition of any pyrotechnic mixture and for various ignition systems.This work was validated in the case of an ignition system consisting of a laser diode with an optical lens re-focussing system. The reactive tablet contains 62% by mass of iron and 38% by mass of KClO{sub 4}. Its porosity is 25.8%. After an evaluation of the laser's coefficient of absorption, the variations of the ignition parameters E{sub 50} and t{sub i} are studied as a function of the thermal contact resistance R{sub c}. Temperature profiles are obtained as a function of time and for various values of the thermal contact resistance R{sub c}. More fundamental observations are made concerning the position of the hot spot corresponding to priming. From this study, which concerns the heat exchange between the two media, several practical conclusions are given concerning the design of an ignition device. By evaluation of the thermal contact resistance R{sub c}, comparison with test results becomes possible and the results of the computations are in reasonable agreement with the test measurements. (authors)

Behaviour modelling of two aluminas in divergent spherical pyrotechnical experiments

International Nuclear Information System (INIS)

Malaise, F.; Tranchet, J.Y.; Collombet, F.

1997-01-01

Two pure aluminas of different characteristics have been subjected to the propagation of a longitudinal divergent spherical shock wave through pyrotechnical experiments. An approach combining a phenomenological analysis and numerical 1D-calculations is proposed to study the behaviour of these aluminas submitted to that type of wave loading. The modelling, proposed in a previous paper, is refined and gives satisfying experimentation-calculation correlations. An analysis of the influence exerted by the various encountered phenomena (plastic activity, pore closure, microcracking) is performed. The significant consequence of the activation of damage with an extension criterion is also underlined. (orig.)

Pyrotechnic countermeasures: II. Advanced aerial infrared countermeasures

Energy Technology Data Exchange (ETDEWEB)

Koch, Ernst-Christian [Diehl BGT Defence GmbH and Co. KG, Fischbachstrasse 16, D-90552 Roethenbach a. d. Pegnitz (Germany)

2006-02-15

This paper discusses the technology of advanced aerial infrared countermeasures and related work disclosed in the unclassified literature. Missile-seeker head counter-countermeasures include spectral discrimination, kinematical discrimination, rise-time discrimination, UV/VIS discrimination and area temperature matching. Advanced flare payloads designed to counter dual color seekers contain selectively emitting compositions based primarily on high carbon fuels and perchlorates. Other advanced payloads consist of low temperature emitters like pyrophoric metal foils and gasless pyrotechnic compositions like Fe/KClO{sub 4}. The optimization of black body flares, still considered essential to a successful countermeasure solution, make use of new fuels based on e.g. meta-stable alloys and nanometer-sized powders as well as high energetic oxidizers. Kinematic flares today use combined propellant and infrared grains. 116 references from the public domain are given. For part I see Propellants, Explos., Pyrotech. 2001, 26, 3. (Abstract Copyright [2006], Wiley Periodicals, Inc.)

The UNIX/XENIX Advantage: Applications in Libraries.

Science.gov (United States)

Gordon, Kelly L.

1988-01-01

Discusses the application of the UNIX/XENIX operating system to support administrative office automation functions--word processing, spreadsheets, database management systems, electronic mail, and communications--at the Central Michigan University Libraries. Advantages and disadvantages of the XENIX operating system and system configuration are…

Stochastic shock response spectrum decomposition method based on probabilistic definitions of temporal peak acceleration, spectral energy, and phase lag distributions of mechanical impact pyrotechnic shock test data

Science.gov (United States)

Hwang, James Ho-Jin; Duran, Adam

2016-08-01

Most of the times pyrotechnic shock design and test requirements for space systems are provided in Shock Response Spectrum (SRS) without the input time history. Since the SRS does not describe the input or the environment, a decomposition method is used to obtain the source time history. The main objective of this paper is to develop a decomposition method producing input time histories that can satisfy the SRS requirement based on the pyrotechnic shock test data measured from a mechanical impact test apparatus. At the heart of this decomposition method is the statistical representation of the pyrotechnic shock test data measured from the MIT Lincoln Laboratory (LL) designed Universal Pyrotechnic Shock Simulator (UPSS). Each pyrotechnic shock test data measured at the interface of a test unit has been analyzed to produce the temporal peak acceleration, Root Mean Square (RMS) acceleration, and the phase lag at each band center frequency. Maximum SRS of each filtered time history has been calculated to produce a relationship between the input and the response. Two new definitions are proposed as a result. The Peak Ratio (PR) is defined as the ratio between the maximum SRS and the temporal peak acceleration at each band center frequency. The ratio between the maximum SRS and the RMS acceleration is defined as the Energy Ratio (ER) at each band center frequency. Phase lag is estimated based on the time delay between the temporal peak acceleration at each band center frequency and the peak acceleration at the lowest band center frequency. This stochastic process has been applied to more than one hundred pyrotechnic shock test data to produce probabilistic definitions of the PR, ER, and the phase lag. The SRS is decomposed at each band center frequency using damped sinusoids with the PR and the decays obtained by matching the ER of the damped sinusoids to the ER of the test data. The final step in this stochastic SRS decomposition process is the Monte Carlo (MC

Optimized Analytical Method to Determine Gallic and Picric Acids in Pyrotechnic Samples by Using HPLC/UV (Reverse Phase)

International Nuclear Information System (INIS)

Garcia Alonso, S.; Perez Pastor, R. M.

2013-01-01

A study on the optimization and development of a chromatographic method for the determination of gallic and picric acids in pyrotechnic samples is presented. In order to achieve this, both analytical conditions by HPLC with diode detection and extraction step of a selected sample were studied. (Author)

Investigation of the thermal decomposition of magnesium–sodium nitrate pyrotechnic composition (SR-524 and the effect of accelerated aging

Directory of Open Access Journals (Sweden)

Zaheer-ud-din Babar

2017-03-01

Full Text Available The aging behavior of the pyrotechnics is influenced by the storage atmosphere and more specifically on the temperature and humidity levels. The investigated composition SR 524 is a military pyrotechnic composition that is used as a tracer. The accelerated aging of the SR 524 composition has been carried out at a temperature of 70 °C and relative humidity of 70 percent. The results indicate that there is significant change in the thermal behavior, kinetic parameters and the morphology of the aged composition. The decomposition temperature and the activation energy were found to be lowered in the aged composition. The activation energy of the aged composition decreased nearly 57 percent. SEM micrographs of the aged composition revealed the development of micro cracks as a result of accelerated aging. XRD spectra of the aged composition showed the presence of magnesium hydroxide indicating the reaction between magnesium and water vapors present in the highly humid atmosphere.

Using the Chemistry of Fireworks to Engage Students in Learning Basic Chemical Principles: A Lesson in Eco-Friendly Pyrotechnics

Science.gov (United States)

Steinhauser, Georg; Klapotke, Thomas M.

2010-01-01

Fascination with fireworks and pyrotechnics can be used for educational purposes. Several aspects of pyrochemistry such as redox reactions, flame colors, or the theory of combustion can be incorporated in the curriculum to illustrate some basic chemical principles, guaranteeing a lesson that will be engaging and memorable. Beyond classic…

Clinical applications of SPECT/CT: advantages and limitations

International Nuclear Information System (INIS)

Rigo, P.

2006-01-01

The application of hybrid SPECT cameras in Nuclear Medicine follows the revolutionary introduction of PET/CT. This review focuses on the advantages and limitations of SPECT/CT in its various clinical indications. It appears that SPECT/CT will be a clear factor of progress for Nuclear Medicine. (author)

Mass flow discharge and total temperature characterisation of a pyrotechnic gas generator formulation for airbag systems

Energy Technology Data Exchange (ETDEWEB)

Neutz, Jochen; Koenig, Andreas [Fraunhofer Institut fuer Chemische Technologie ICT, Pfinztal (Germany); Knauss, Helmut; Jordan, Sebastian; Roediger, Tim; Smorodsky, Boris [Universitaet Stuttgart (Germany). Institut fuer Aerodynamik und Gasdynamik; Bluemcke, Erich Walter [AUDI AG, Department I/EK-523, Ingolstadt (Germany)

2009-06-15

The mass flow characteristics of gas generators for airbag applications have to comply with a number of requirements for an optimal deployment of the airbag itself. Up to now, the mass flow was determined from pressure time histories of so-called can tests. This procedure suffers from the missing knowledge on the temperature of the generated gas entering the can. A new test setup described in this paper could overcome this problem by providing highly time resolved information on the gas's total temperature and the mass flow of the generator. The test setup consisted of a combustion chamber with a specially designed Laval nozzle in combination with a temperature sensor of high time resolution. The results showed a high time resolved temperature signal, which was disturbed by the formation of a slag layer on the sensor. Plausibility considerations with experimentally and thermodynamically determined combustion temperatures led to satisfying results for the overall temperature as characteristic parameter of airbag inflating gases flows from pyrotechnics. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

A case study :creating and sustaining competitive advantage through an information technology application in the lodging industry

OpenAIRE

Cho, Wonae

1996-01-01

The use of information technology (IT) is becoming an essential component within the commercial sector. While large number of companies have adopted IT applications to achieve competitive advantage, and number of studies have been done on competitive advantage through an IT application, it is not clear what the impact of an IT application on competitive advantage is. The purpose of this study was to examine the impact of an IT application on competitive advantage and how to cre...

The Theoretical Basis of the Concept of Using the Controlled Pyrotechnical Reaction Method as an Energy Source in Transportation from the Sea Bed

Directory of Open Access Journals (Sweden)

Wiktor Filipek

2017-12-01

Full Text Available In recent years we have observed the global growing interest in undersea exploitation of mineral deposits. Research on various concepts of operating systems on the seabed has been conducted, where different methods of transporting excavated material from the bottom to the surface are used. Great depths, where there are the most interesting resources (eg. IOM lot for the Clarion-Clipperton 4500 m set very high technical and technological demands which results in intensive search for solutions. The authors of the paper want to explain the concept of the use of pyrotechnic materials for transportation in the aquatic environment. The presented method is designed for the cyclic transport from great depths (less than 200 m from the seabed. The principle of operation of the relay unit is based on the change in the average density of the entire module which is inseparably connected with the force of buoyancy acting on the submerged body. Changing the density of the whole module to the given depth of immersion is strictly dependent on the amount of energy supplied to the system by a power source in the form of a controlled pyrotechnic reaction. However, during the ascent energy demand decreases. The problem of transport of spoil from depth not only boils down to such considerations as initiation of the process of ascent. One should also consider how to use the excess energy occurring during the movement of the object toward the surface. The authors of the paper present the concept of making the transport of cyclic depths (less than 200 m from the seabed taking into account the optimal use of energy from controlled pyrotechnic reaction.

Technical and cost advantages of silicon carbide telescopes for small-satellite imaging applications

Science.gov (United States)

Kasunic, Keith J.; Aikens, Dave; Szwabowski, Dean; Ragan, Chip; Tinker, Flemming

2017-09-01

Small satellites ("SmallSats") are a growing segment of the Earth imaging and remote sensing market. Designed to be relatively low cost and with performance tailored to specific end-use applications, they are driving changes in optical telescope assembly (OTA) requirements. OTAs implemented in silicon carbide (SiC) provide performance advantages for space applications but have been predominately limited to large programs. A new generation of lightweight and thermally-stable designs is becoming commercially available, expanding the application of SiC to small satellites. This paper reviews the cost and technical advantages of an OTA designed using SiC for small satellite platforms. Taking into account faceplate fabrication quilting and surface distortion after gravity release, an optimized open-back SiC design with a lightweighting of 70% for a 125-mm SmallSat-class primary mirror has an estimated mass area density of 2.8 kg/m2 and an aspect ratio of 40:1. In addition, the thermally-induced surface error of such optimized designs is estimated at λ/150 RMS per watt of absorbed power. Cost advantages of SiC include reductions in launch mass, thermal-management infrastructure, and manufacturing time based on allowable assembly tolerances.

Theoretical Energy Release of Thermites, Intermetallics, and Combustible Metals

Energy Technology Data Exchange (ETDEWEB)

Fischer, S.H.; Grubelich, M.C.

1999-05-14

Thermite mixtures, intermetallic reactants, and metal fuels have long been used in pyrotechnic applications. Advantages of these systems typically include high energy density, high combustion temperature, and a wide range of gas production. They generally exhibit high temperature stability and possess insensitive ignition properties. For the specific applications of humanitarian demining and disposal of unexploded ordnance, these pyrotechnic formulations offer additional benefits. The combination of high thermal input with low brisance can be used to neutralize the energetic materials in mines and other ordnance without the "explosive" high-blast-pressure events that can cause extensive collateral damage to personnel, facilities, and the environment. In this paper, we review the applications, benefits, and characteristics of thermite mixtures, intermetallic reactants, and metal fuels. Calculated values for reactant density, heat of reaction (per unit mass and per unit volume), and reaction temperature (without and with consideration of phase changes and the variation of specific heat values) are tabulated. These data are ranked in several ways, according to density, heat of reaction, reaction temperature, and gas production.

Preparation and Characterization of Pyrotechnics Binder-Coated Nano-Aluminum Composite Particles

Science.gov (United States)

Ye, Mingquan; Zhang, Shuting; Liu, Songsong; Han, Aijun; Chen, Xin

2017-07-01

The aim of this article is to protect the activity of nano-aluminum (Al) particles in solid rocket propellants and pyrotechnics. The morphology, structure, active aluminum content, and thermal and catalytic properties of the coated samples were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetry-differential scanning calorimetry (TG-DSC), and oxidation-reduction titration methods. The results indicated that nano-Al particles could be effectively coated with phenolic resin (PF), fluororubber (Viton B), and shellac through a solvent/nonsolvent method. The energetic composite particles have core-shell structures and the thickness of the coating film is about 5-15 nm. Analysis of the active Al content revealed that Viton B coating had a much better protective effect. The TG-DSC results showed that the energy amount and energy release rate of PF-, Viton B-, and shellac-coated Al particles were larger than those of the raw nano-Al particles. The catalytic effects of coated Al particles on the thermal decomposition of ammonium perchlorate (AP) were better than those of raw nano-Al particles, and the effect of shellac-coated Al particles was significantly better than that of Viton B-coated Al particles.

Mixed methods research in pedagogy: Characteristics, advantages and difficulties in application

Directory of Open Access Journals (Sweden)

Matović Nataša

2015-01-01

Full Text Available The mixed methods research, as a new type of research, is discussed in the context of re-examining the relation between the two approaches, i.e. the possibility of not opposing, but connecting, combining and integrating them within research. The possibility to use such grounding in research as well could be quite important for pedagogy since the nature of the examined phenomena in this field is such that the majority has both quantitative and qualitative aspects. In order to explain the essence of a mixed methods research, the paper analyses its characteristics, first of all, what elements are combined, what is the nature of the relation between the combined elements and why they are combined, as well as its advantages and difficulties in application. The essential thing in a mixed methods research is the fact that combining refers to the research process as a whole, including the ontological and epistemological assumptions it is based on, which implies that the elements that are combined are understood rather broadly. The advantages and difficulties in application are considered in the context of the discussion of the possibility to combine all research elements, neutralise the limitations of quantitative and qualitative research methodology, implement the complex combining procedures etc. [Projekat Ministarstva nauke Republike Srbije, br. 179060: Modeli procenjivanja i strategije unapređivanja kvaliteta obrazovanja

Customer Knowledge Management Application in Gaining Organization's Competitive Advantage in Electronic Commerce

OpenAIRE

Aghamirian, Bahman; Dorri, Behrouz; Aghamirian, Babak

2015-01-01

In modern organizations, knowledge is the fundamental basis of competition. In the new context, two major factors determine the future survival or success of organizations: electronic commerce and the knowledge from customers. Thus, the goals of the research were figured out, and investigating the relationship and application of customer's knowledge management in gaining competitive advantages of organizations in E-commerce and also the 8 followings factors were investigated: knowledge from c...

Surgery planning and navigation by laser lithography plastic replica. Features, clinical applications, and advantages

International Nuclear Information System (INIS)

Kihara, Tomohiko; Tanaka, Yuuko; Furuhata, Kentaro

1995-01-01

The use of three-dimensional replicas created using laserlithography has recently become popular for surgical planning and intraoperative navigation in plastic surgery and oral maxillofacial surgery. In this study, we investigated many clinical applications that we have been involved in regarding the production of three-dimensional replicas. We have also analyzed the features, application classes, and advantages of this method. As a result, clinical applications are categorized into three classes, which are 'three-dimensional shape recognition', 'simulated surgery', and 'template'. The distinct features of three-dimensional replicas are 'direct recognition', 'fast manipulation', and 'free availability'. Meeting the requirements of surgical planning and intraoperative navigation, they have produced satisfactory results in clinical applications. (author)

New Classes of Applications in the Cloud. Evaluating Advantages and Disadvantages of Cloud Computing for Telemetry Applications

Directory of Open Access Journals (Sweden)

Anca APOSTU

2014-05-01

Full Text Available Nowadays companies are moving some parts of their businesses to the cloud. Industry predictions are that this trend will continue to grow and develop even further in the coming few years. While Cloud computing is undoubtedly beneficial for mid-size to large companies, it is not without its downsides, especially for smaller businesses. This paper's aim is to deliver an analysis based on advantages and disadvantages of Cloud computing technology, in order to help organizations fully understand and adopt this new computing technology. Finally, to prove the advantages that Cloud technology can have for this domain, we are presenting a cloud application for telemetry, with a focus on monitoring hydro-energy. We consider that the way to attain the benefits of Cloud technology is to understand its strengths and weaknesses and adapt to them accordingly.

Advantage of resonant power conversion in aerospace applications

Science.gov (United States)

Hansen, I. G.

1983-01-01

An ultrasonic, sinusoidal aerospace power distribution system is shown to have many advantages over other candidate power systems. These advantages include light weight, ease of fault clearing, versatility in handling many loads including motors, and the capability of production within the limits of present technology. References are cited that demonstrate the state of resonant converter technology and support these conclusions.

[Advantages and Application Prospects of Deep Learning in Image Recognition and Bone Age Assessment].

Science.gov (United States)

Hu, T H; Wan, L; Liu, T A; Wang, M W; Chen, T; Wang, Y H

2017-12-01

Deep learning and neural network models have been new research directions and hot issues in the fields of machine learning and artificial intelligence in recent years. Deep learning has made a breakthrough in the applications of image and speech recognitions, and also has been extensively used in the fields of face recognition and information retrieval because of its special superiority. Bone X-ray images express different variations in black-white-gray gradations, which have image features of black and white contrasts and level differences. Based on these advantages of deep learning in image recognition, we combine it with the research of bone age assessment to provide basic datum for constructing a forensic automatic system of bone age assessment. This paper reviews the basic concept and network architectures of deep learning, and describes its recent research progress on image recognition in different research fields at home and abroad, and explores its advantages and application prospects in bone age assessment. Copyright© by the Editorial Department of Journal of Forensic Medicine.

Proceedings of the second national conference on nanotechnology - applications and its advantages in natural science: souvenir

International Nuclear Information System (INIS)

2011-01-01

The second national conference on nanotechnology - applications and its advantages in natural science was held during February 4-5, 2011. The most relevant topics discussed in the conference were: characterisation of nanoparticles, synthesis of nanostructures, electro-catalytic oxidation, rare earth oxides etc. Papers relevant to INIS are indexed separately

Thermal plasma spraying for SOFCs: Applications, potential advantages, and challenges

Energy Technology Data Exchange (ETDEWEB)

Hui, Rob; Wang, Zhenwei; Jankovic, Jasna; Yick, Sing; Maric, Radenka; Ghosh, Dave [National Research Council Institute for Fuel Cell Innovation, 4250 Wesbrook Mall, Vancouver, BC V6T 1W5 (Canada); Kesler, Olivera [National Research Council Institute for Fuel Cell Innovation, 4250 Wesbrook Mall, Vancouver, BC V6T 1W5 (Canada); Department of Mechanical Engineering, University of British Columbia, 2054-6250 Applied Science Lane, Vancouver, BC V6T 1Z4 (Canada); Rose, Lars [National Research Council Institute for Fuel Cell Innovation, 4250 Wesbrook Mall, Vancouver, BC V6T 1W5 (Canada); Department of Materials Engineering, University of British Columbia, 309-6350 Stores Road, Vancouver, BC V6T 1Z4 (Canada)

2007-07-10

In this article, the applications, potential advantages, and challenges of thermal plasma spray (PS) processing for nanopowder production and cell fabrication of solid oxide fuel cells (SOFCs) are reviewed. PS processing creates sufficiently high temperatures to melt all materials fed into the plasma. The heated material can either be quenched into oxide powders or deposited as coatings. This technique has been applied to directly deposit functional layers as well as nanopowder for SOFCs application. In particularly, low melting point and highly active electrodes can be directly fabricated on zirconia-based electrolytes. This is a simple processing technique that does not require the use of organic solvents, offering the opportunity for flexible adjustment of process parameters, and significant time saving in production of the cell and cost reduction compared with tape casting, screen printing and sintering processing steps. Most importantly, PS processing shows strong potential to enable the deposition of metal-supported SOFCs through the integrated fabrication of membrane-electrode assemblies (MEA) on porous metallic substrates with consecutive deposition steps. On the other hand, the application of PS processing to produce SOFCs faces some challenges, such as insufficient porosity of the electrodes, the difficulty of obtaining a thin (<10 {mu}m) and dense electrolyte layer. Fed with H{sub 2} as the fuel gas and oxygen as the oxidant gas, the plasma sprayed cell reached high power densities of 770 mW cm{sup -2} at 900 C and 430 mW cm{sup -2} at 800 C at a cell voltage of 0.7 V. (author)

Competitive Advantage through Innovation

DEFF Research Database (Denmark)

Brem, Alexander; Maier, Maximilian; Wimschneider, Christine

2016-01-01

Purpose The purpose of this paper is to describe how Nespresso achieved competitive advantage through innovation by changing the rules of the game in its industry. Design/methodology/approach Nespresso was analyzed based on public available secondary data, in combination with related academic...... concepts on innovation and competitive advantage. Findings The company succeeded by the thorough application of a strategy that, through perfect alignment, allowed the company to reach a unique market position. However, as described in the case, it took a relatively long time and the company came close...... as a source for competitive advantage. Research limitations/implications Especially given the current market situation, the case offers different starting points for discussion about innovation and long-term company success. Practical implications Especially before the current market situation, the case...

Assessment of potential advantages of high Tc-superconductors for technical application of superconductivity

International Nuclear Information System (INIS)

Schauer, F.; Juengst, K.P.; Komarek, P.; Maurer, W.

1987-09-01

A first assessment of the technical and economical consequences of liquid nitrogen cooling of new superconductors is given. For the investigation the applications of superconductivity are classified in two categories: First, systems where superconductors are practically indispensable for achieving the system's objectives; second, superconductor applications in competition with highly developed conventional technologies. Further development of those superconducting systems in the first category for which the cost of cryogenic equipment is a smaller fraction of the total system cost (e.g. fusion reactor or MHD generator) will hardly be affected. However, for systems like particle accelerators, research magnets, and NMR spectroscopy and imaging systems, the cryogenic equipment expenditures are significant and LN 2 cooling leads here to a reduction of investment and operating costs, to simplified handling and maintenance, to better reliability and availability, and will thereby improve the acceptance and further spread of these systems. In the second category each application of superconductivity has to be compared with its conventional counterpart, separately. Here, electonic components, power switches, resistive current limiters, and especially the power transmission cables are those applications which look most promising. For magnet applications the main advantageous arguments are less the cost saving aspect but more the higher reliability, simplicity, N 2 -availability, and ease of handling. (orig.) [de

Practical advantages of evolutionary computation

Science.gov (United States)

Fogel, David B.

1997-10-01

Evolutionary computation is becoming a common technique for solving difficult, real-world problems in industry, medicine, and defense. This paper reviews some of the practical advantages to using evolutionary algorithms as compared with classic methods of optimization or artificial intelligence. Specific advantages include the flexibility of the procedures, as well as their ability to self-adapt the search for optimum solutions on the fly. As desktop computers increase in speed, the application of evolutionary algorithms will become routine.

Advergaming: Application of Knowledge in the Process of the Competitive Advantage Improvement

Directory of Open Access Journals (Sweden)

Pavel Mráček

2013-11-01

Full Text Available Purpose of the article: The paper is involved in the utilization of the knowledge in the process of the competitive advantage improvement by means of the perspective marketing tool - advergaming. The objective of the article is the informing on the possibilities of the use of the knowledge in the field of the advergaming as the possible tool in the marketing communication, leading to the improvement of the competitive advantage of the companies. Scientific aim: Research objective was to identify how knowledge management is used in the Czech companies with respect to their size. Specific aspect of our research was an influence of knowledge management on a decision making process. On the base of results we have identified the requirement of usage of knowledge management in the area of advertgaming. We argue that this is a possible approach improving competitiveness of companies. Methodology/methods: Data for this paper are the data from the research carried out in the Czech companies. This survey focuses on the share of the application of the knowledge management in surveyed companies. 265 companies from the whole Czech Republic, various segments and industries, starting with the tourism, building industry, hotel industry, transport and ending with the manufacturing and distribution of the detergents and the distribution of the medical materials, were involved in the research. The companies were selected randomly. The necessary data were collected from the total number of 265 companies by means of the questionnaire research, and in certain cases the structured interview was used. The synthesis from the individual parts was made, on the basis of which the following conclusions were based. Findings: The paper identifies the method of the use of the knowledge in the advergaming as a possible starting point for the potential model of the utilization of the knowledge in the marketing communication. Conclusions: (limits, implications

Optimized Analytical Method to Determine Gallic and Picric Acids in Pyrotechnic Samples by Using HPLC/UV (Reverse Phase); Optimizacion del Metodo Analitico mediante HPLC/UV Operando en Fase Inversa para la Determinacion de Acido Galico y Acido Picrico en Muestras de Origen Pirotecnico

Energy Technology Data Exchange (ETDEWEB)

Garcia Alonso, S.; Perez Pastor, R. M.

2013-10-01

A study on the optimization and development of a chromatographic method for the determination of gallic and picric acids in pyrotechnic samples is presented. In order to achieve this, both analytical conditions by HPLC with diode detection and extraction step of a selected sample were studied. (Author)

A Conceptual Mapping Resource Advantage Theory, Competitive Advantage Theory, and Transient Competitive Advantage

OpenAIRE

Jasanta PERANGINANGIN

2015-01-01

Competitive advantage is the main purposed of the business entity focusing on market base view. Resource advantage theorists put their concern to empowering resources development with resources based view, in the other side needs to redefining competitive advantage. All the competitive advantage are transient, concluded the end of competitive advantage. Redefining competitive advantage by selling migration and shrewdness outward. This research to emphasize innovation capability rarely appears...

Theoretical energy release of thermites, intermetallics, and combustible metals

Energy Technology Data Exchange (ETDEWEB)

Fischer, S.H.; Grubelich, M.C.

1998-06-01

Thermite (metal oxide) mixtures, intermetallic reactants, and metal fuels have long been used in pyrotechnic applications. Advantages of these systems typically include high energy density, impact insensitivity, high combustion temperature, and a wide range of gas production. They generally exhibit high temperature stability, and possess insensitive ignition properties. In this paper, the authors review the applications, benefits, and characteristics of thermite mixtures, intermetallic reactants, and metal fuels. Calculated values for reactant density, heat of reaction (per unit mass and per unit volume), and reaction temperature (without and with consideration of phase changes and the variation of specific heat values) are tabulated. These data are ranked in several ways, according to density, heat of reaction, reaction temperature, and gas production.

Understanding pyrotechnic shock dynamics and response attenuation over distance

Science.gov (United States)

Ott, Richard J.

Pyrotechnic shock events used during stage separation on rocket vehicles produce high amplitude short duration structural response that can lead to malfunction or degradation of electronic components, cracks and fractures in brittle materials, local plastic deformation, and can cause materials to experience accelerated fatigue life. These transient loads propagate as waves through the structural media losing energy as they travel outward from the source. This work assessed available test data in an effort to better understand attenuation characteristics associated with wave propagation and attempted to update a historical standard defined by the Martin Marietta Corporation in the late 1960's using out of date data acquisition systems. Two data sets were available for consideration. The first data set came from a test that used a flight like cylinder used in NASA's Ares I-X program, and the second from a test conducted with a flat plate. Both data sets suggested that the historical standard was not a conservative estimate of shock attenuation with distance, however, the variation in the test data did not lend to recommending an update to the standard. Beyond considering attenuation with distance an effort was made to model the flat plate configuration using finite element analysis. The available flat plate data consisted of three groups of tests, each with a unique charge density linear shape charge (LSC) used to cut an aluminum plate. The model was tuned to a representative test using the lowest charge density LSC as input. The correlated model was then used to predict the other two cases by linearly scaling the input load based on the relative difference in charge density. The resulting model predictions were then compared with available empirical data. Aside from differences in amplitude due to nonlinearities associated with scaling the charge density of the LSC, the model predictions matched the available test data reasonably well. Finally, modeling best

Advantages of Real-Time Spectrum Analyzers in High-Energy Physics Applications

International Nuclear Information System (INIS)

Parker, Louis

2004-01-01

Typically, particles are injected into the ring at low energy levels and then 'ramped up' to higher levels. During ramping, it is important that the horizontal and vertical tune frequencies do not shift, lest they hit upon a resonant combination that causes beam instability or sudden total loss of ring beam current (beam blow up). Beam instabilities can be caused by a number of factors. Non-linearities and/or different response times of independent controls such as beam position monitor (BPM) cables and circuits, magnets for guidance and focusing of the beam, Klystrons or Tetrodes (which provide power to RF cavities that transmit energy to the beam), and vacuum pumps and monitors can all cause beam instabilities. Vibrations and lack of proper shielding are other factors. The challenge for operators and researchers is to correctly identify the factors causing beam instabilities and blow up so that costly accelerator time is not interrupted and experimental results are not compromised. The instrument often used to identify problems in particle accelerator applications is the spectrum analyzer. This paper will discuss the advantages of real time spectrum analyzers (RSA) versus swept frequency spectrum analyzers in HEP applications. The main focus will be on monitoring beam position and stability, especially during ramp-up. Also covered will be use of RSA for chromaticity measurements, Phase Locked Loop (PLL) diagnostics, and vibration analysis

Institutional advantage

NARCIS (Netherlands)

Martin, Xavier

Is there such a thing as institutional advantage—and what does it mean for the study of corporate competitive advantage? In this article, I develop the concept of institutional competitive advantage, as distinct from plain competitive advantage and from comparative institutional advantage. I first

Insurer Provide Rating Software and Competitive Advantage: An Evaluation Based on BOP Insurance Applications at Wisconsin Agencies

OpenAIRE

Thomas A. Aiuppa; William E. Wehrs

1993-01-01

This research examines whether a competitive advantage exists for insurers which provide independent agencies with rating software to generate price quotes. Data relative to the Business Owners line of insurance were collected from several Wisconsin agencies which represent several BOP insurers, some of which provide software for rating BOP applications. The results indicate that providing rating software did not increase insurers’ business volumes, but may decrease their underwriting costs. ...

New Generation Power System for Space Applications

Science.gov (United States)

Jones, Loren; Carr, Greg; Deligiannis, Frank; Lam, Barbara; Nelson, Ron; Pantaleon, Jose; Ruiz, Ian; Treicler, John; Wester, Gene; Sauers, Jim;

2D and 3D impellers of centrifugal compressors - advantages, shortcomings and fields of application

Science.gov (United States)

Galerkin, Y.; Reksrin, A.; Drozdov, A.

2017-08-01

The simplified equations are presented for calculation of inlet dimensions and velocity values for impellers with three-dimensional blades located in axial and radial part of an impeller (3D impeller) and with two-dimensional blades in radial part (2D). Considerations concerning loss coefficients of 3D and 2D impellers at different design flow rate coefficients are given. The tendency of reduction of potential advantages of 3D impellers at medium and small design flow rate coefficients is shown. The data on high-efficiency compressors and stages with 2D impellers coefficients designed by the authors are presented. The reached efficiency level of 88 - 90% makes further increase of efficiency by the application of 3D impellers doubtful. CFD-analysis of stage candidates with medium flow rate coefficient with 3D and 2D impellers revealed specific problems. In some cases the constructive advantage of a 2D impeller is smaller hub ratio. It makes possible the reaching of higher efficiency. From other side, there is a positive tendency of gas turbine drive RPM increase. 3D impellers have no alternative for stages with high flow rate coefficients matching high-speed drive.

Opportunity of interventional radiology: advantages and application of interventional technique in biological target therapy

International Nuclear Information System (INIS)

Teng Gaojun; Lu Qin

2007-01-01

Interventional techniques not only provide opportunity of treatment for many diseases, but also alter the traditional therapeutic pattern. With the new century of wide application of biological therapies, interventional technique also shows extensive roles. The current biological therapy, including gene therapy, cell transplantation therapy, immunobiologic molecule therapy containing cell factors, tumor antibody or vaccine, recombined proteins, radioactive-particles and targeting materials therapy, can be locally administrated by interventional techniques. The combination of targeting biological therapies and high-targeted interventional technique holds advantages of minimal invasion, accurate delivery, vigorous local effect, and less systemic adverse reactions. Authors believe that the biological therapy may arise a great opportunity for interventional radiology, therefore interventional colleagues should grasp firmly and promptly for the development and extension in this field. (authors)

Normally-Closed Zero-Leak Valve with Magnetostrictive Actuator

Science.gov (United States)

Ramspacher, Daniel J. (Inventor); Richard, James A. (Inventor)

2017-01-01

A non-pyrotechnic, normally-closed, zero-leak valve is a replacement for the pyrovalve used for both in-space and launch vehicle applications. The valve utilizes a magnetostrictive alloy for actuation, rather than pyrotechnic charges. The alloy, such as Terfenol-D, experiences magnetostriction, i.e. a gross elongation, when exposed to a magnetic field. This elongation fractures a parent metal seal, allowing fluid flow through the valve. The required magnetic field is generated by redundant coils that are isolated from the working fluid.

Application of Activity-Based Costing Management System by Key Success Paths to Promote the Competitive Advantages and Operation Performance

OpenAIRE

Mei-Fang Wu; Shu-Li Wang; Feng-Tsung Cheng

2015-01-01

Highly developed technology and highly competitive global market highlight the important role of competitive advantages and operation performances in sustainable company operation. Activity-Based Costing (ABC) provides accurate operation cost and operation performance information. Rich literatures provide relevant research with cases study on Activity-Based Costing application, but the research on cause relationship between key success factors and its specific outcome, su...

Hydrothermal Synthesis of VO2 Polymorphs: Advantages, Challenges and Prospects for the Application of Energy Efficient Smart Windows.

Science.gov (United States)

Li, Ming; Magdassi, Shlomo; Gao, Yanfeng; Long, Yi

2017-09-01

Vanadium dioxide (VO 2 ) is a widely studied inorganic phase change material, which has a reversible phase transition from semiconducting monoclinic to metallic rutile phase at a critical temperature of τ c ≈ 68 °C. The abrupt decrease of infrared transmittance in the metallic phase makes VO 2 a potential candidate for thermochromic energy efficient windows to cut down building energy consumption. However, there are three long-standing issues that hindered its application in energy efficient windows: high τ c , low luminous transmittance (T lum ), and undesirable solar modulation ability (ΔT sol ). Many approaches, including nano-thermochromism, porous films, biomimetic surface reconstruction, gridded structures, antireflective overcoatings, etc, have been proposed to tackle these issues. The first approach-nano-thermochromism-which is to integrate VO 2 nanoparticles in a transparent matrix, outperforms the rest; while the thermochromic performance is determined by particle size, stoichiometry, and crystallinity. A hydrothermal method is the most common method to fabricate high-quality VO 2 nanoparticles, and has its own advantages of large-scale synthesis and precise phase control of VO 2 . This Review focuses on hydrothermal synthesis, physical properties of VO 2 polymorphs, and their transformation to thermochromic VO 2 (M), and discusses the advantages, challenges, and prospects of VO 2 (M) in energy-efficient smart windows application. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Application and advantages of the connector "and possibly" in bipolar queries on Gefred model

Directory of Open Access Journals (Sweden)

Fabián Castiblanco R.

2016-06-01

Full Text Available Fuzzy databases have been implemented in corporate and organizational level as an efficient and effective tool to carry out searches with values that can be vague, unknown, incomplete or null. In the same way, developments about bipolarity have allowed user to raise more flexible queries in terms of their proximity to natural language. The aim of this paper is to implement the fuzzy operator “and possibly” proposed by the theory of bipolar queries, in the Generalized Model of Fuzzy Relational Databases (Gefred. With this aim in mind, in the first part it is addressed the theoretical aspects about bipolarity and the Gefred model that allow to think about an integration between both theories. Then, through an application, it is proposed the needed procedures and the emerging advantages of use of fuzzy operator.

The VISTA spacecraft: Advantages of ICF [Inertial Confinement Fusion] for interplanetary fusion propulsion applications

International Nuclear Information System (INIS)

Orth, C.D.; Klein, G.; Sercel, J.; Hoffman, N.; Murray, K.; Chang-Diaz, F.

1987-01-01

Inertial Confinement Fusion (ICF) is an attractive engine power source for interplanetary manned spacecraft, especially for near-term missions requiring minimum flight duration, because ICF has inherent high power-to-mass ratios and high specific impulses. We have developed a new vehicle concept called VISTA that uses ICF and is capable of round-trip manned missions to Mars in 100 days using A.D. 2020 technology. We describe VISTA's engine operation, discuss associated plasma issues, and describe the advantages of DT fuel for near-term applications. Although ICF is potentially superior to non-fusion technologies for near-term interplanetary transport, the performance capabilities of VISTA cannot be meaningfully compared with those of magnetic-fusion systems because of the lack of a comparable study of the magnetic-fusion systems. We urge that such a study be conducted

Building Information Model: advantages, tools and adoption efficiency

Science.gov (United States)

Abakumov, R. G.; Naumov, A. E.

2018-03-01

The paper expands definition and essence of Building Information Modeling. It describes content and effects from application of Information Modeling at different stages of a real property item. Analysis of long-term and short-term advantages is given. The authors included an analytical review of Revit software package in comparison with Autodesk with respect to: features, advantages and disadvantages, cost and pay cutoff. A prognostic calculation is given for efficiency of adoption of the Building Information Modeling technology, with examples of its successful adoption in Russia and worldwide.

Direct diode lasers and their advantages for materials processing and other applications

Science.gov (United States)

Fritsche, Haro; Ferrario, Fabio; Koch, Ralf; Kruschke, Bastian; Pahl, Ulrich; Pflueger, Silke; Grohe, Andreas; Gries, Wolfgang; Eibl, Florian; Kohl, Stefanie; Dobler, Michael

2015-03-01

The brightness of diode lasers is improving continuously and has recently started to approach the level of some solid state lasers. The main technology drivers over the last decade were improvements of the diode laser output power and divergence, enhanced optical stacking techniques and system design, and most recently dense spectral combining. Power densities at the work piece exceed 1 MW/cm2 with commercially available industrial focus optics. These power densities are sufficient for cutting and welding as well as ablation. Single emitter based diode laser systems further offer the advantage of fast current modulation due their lower drive current compared to diode bars. Direct diode lasers may not be able to compete with other technologies as fiber or CO2-lasers in terms of maximum power or beam quality. But diode lasers offer a range of features that are not possible to implement in a classical laser. We present an overview of those features that will make the direct diode laser a very valuable addition in the near future, especially for the materials processing market. As the brightness of diode lasers is constantly improving, BPP of less than 5mm*mrad have been reported with multikW output power. Especially single emitter-based diode lasers further offer the advantage of very fast current modulation due to their low drive current and therefore low drive voltage. State of the art diode drivers are already demonstrated with pulse durations of direct current control allows pulses of several microseconds with hundreds of watts average power. Spot sizes of less than 100 μm are obtained at the work piece. Such a diode system allows materials processing with a pulse parameter range that is hardly addressed by any other laser system. High productivity material ablation with cost effective lasers is enabled. The wide variety of wavelengths, high brightness, fast power modulation and high efficiency of diode lasers results in a strong pull of existing markets, but

Technology Survey Assistance Tool Focusing on Their Advantages

Science.gov (United States)

Nishiyama, Risa; Takeuchi, Hironori; Watanabe, Hideo; Nasukawa, Tetsuya

It is important for R&D managers, consultants, and other people seeking broad knowledge in technology fields to survey technical literature such as research papers, white papers, and technology news articles. One of the important kinds of information for those people regards the effectiveness of new technologies in their own businesses. General search engines are good at selecting documents revealing the details of a specific technology or a technology field, but it is hard to obtain useful information about how a technology will apply to individual business cases from such search results. There is a need for a technology survey assistance tool that helps users find technologies with suitable capabilities. In this paper, two technical tasks were tackled to develop the prototype of this assistance tool: Extraction of advantage phrases and scoring for the advantage phrases to find novel applications in the target technology field. We describe a new method to identify advantage phrases in technical documents and our scoring function that gives higher scores to novel applications of the technology. The results of evaluations showed our phrase identification method with only a few phrasal patterns performs almost as well as human annotators, and the proposed scoring conforms better to the decisions made by professionals than random sort.

Energy Scaling Advantages of Resistive Memory Crossbar Based Computation and its Application to Sparse Coding

Directory of Open Access Journals (Sweden)

Sapan eAgarwal

2016-01-01

Full Text Available The exponential increase in data over the last decade presents a significant challenge to analytics efforts that seek to process and interpret such data for various applications. Neural-inspired computing approaches are being developed in order to leverage the computational advantages of the analog, low-power data processing observed in biological systems. Analog resistive memory crossbars can perform a parallel read or a vector-matrix multiplication as well as a parallel write or a rank-1 update with high computational efficiency. For an NxN crossbar, these two kernels are at a minimum O(N more energy efficient than a digital memory-based architecture. If the read operation is noise limited, the energy to read a column can be independent of the crossbar size (O(1. These two kernels form the basis of many neuromorphic algorithms such as image, text, and speech recognition. For instance, these kernels can be applied to a neural sparse coding algorithm to give an O(N reduction in energy for the entire algorithm. Sparse coding is a rich problem with a host of applications including computer vision, object tracking, and more generally unsupervised learning.

Business Intelligence Solutions for Gaining Competitive Advantage

Directory of Open Access Journals (Sweden)

2007-01-01

Full Text Available Business Intelligence is the process for increasing the competitive advantage of a company by intelligent use of available data in decision-making. Only a revolutionary Business Intelligence solution, like the proposed portal-based, can solve the complex issues faced when evaluating decision support applications and ensures the availability of any business-critical information.

Advantages of computer cameras over video cameras/frame grabbers for high-speed vision applications

Science.gov (United States)

Olson, Gaylord G.; Walker, Jo N.

1997-09-01

Cameras designed to work specifically with computers can have certain advantages in comparison to the use of cameras loosely defined as 'video' cameras. In recent years the camera type distinctions have become somewhat blurred, with a great presence of 'digital cameras' aimed more at the home markets. This latter category is not considered here. The term 'computer camera' herein is intended to mean one which has low level computer (and software) control of the CCD clocking. These can often be used to satisfy some of the more demanding machine vision tasks, and in some cases with a higher rate of measurements than video cameras. Several of these specific applications are described here, including some which use recently designed CCDs which offer good combinations of parameters such as noise, speed, and resolution. Among the considerations for the choice of camera type in any given application would be such effects as 'pixel jitter,' and 'anti-aliasing.' Some of these effects may only be relevant if there is a mismatch between the number of pixels per line in the camera CCD and the number of analog to digital (A/D) sampling points along a video scan line. For the computer camera case these numbers are guaranteed to match, which alleviates some measurement inaccuracies and leads to higher effective resolution.

Absolute advantage

NARCIS (Netherlands)

J.G.M. van Marrewijk (Charles)

2008-01-01

textabstractA country is said to have an absolute advantage over another country in the production of a good or service if it can produce that good or service using fewer real resources. Equivalently, using the same inputs, the country can produce more output. The concept of absolute advantage can

Competitive versus comparative advantage

OpenAIRE

Neary, J. Peter

2002-01-01

I explore the interactions between comparative, competitive and absolute advantage in a two-country model of oligopoly in general equilibrium. Comparative advantage always determines the direction of trade, but both competitive and absolute advantage affect resource allocation, trade patterns and trade volumes. Competitive advantage in the sense of more home firms drives foreign firms out of marginal sectors but also makes some marginal home sectors uncompetitive. Absolute advantage in the se...

Advantages of the in-situ LTP distortion profile test on high-heat-load mirrors and applications

International Nuclear Information System (INIS)

Qian, S.; Jark, W.; Sostero, G.; Gambitta, A.; Mazzolini, F.; Savoia, A.

1996-01-01

The first in-situ distortion profile measurement of a high heat load mirror by use of the penta-prism LTP is presented. A maximum height distortion of 0.47 micron in tangential direction over a length of 180 mm was measured for an internally water-cooled mirror of a undulator beam line at ELETTRA while exposed to a total emitted power of 600 W (undulator gap 30 mm and current 180 mA). The experiment has an accuracy and repeatability of 0.04 micron. The test schematic and the test equipment are presented. Two measuring methods to scan a penta-prism being installed either outside or inside the vacuum chamber are introduced. Advantages and some possible applications of adopting the penta-prism LTP to make the in-situ profile test are explained

Radio controlled detonators and sequential real time blast applications

Energy Technology Data Exchange (ETDEWEB)

Bernard, T.; Laboz, J.M. [Delta Caps International, Nice (France)

1995-12-31

Among the numerous technical evolutions in the blasting environment the authors are going to describe below the concept of electronic detonator sequenced by radio waves, and also its numerous applications. Three major technologies are used in the initiation environment: fused-initiated detonators; electric detonators; and non-electric detonators. The last two technologies were made available under multiple variants. Two major innovations are going to substantially change the way traditional detonators operate: pyrotechnic delays are replaced by electronic delays (greater accuracy); and triggering orders, passing through a cable, is now replaced by radio-waves transmission (possibility to do real time delay pattern). Such a new product provided all the features offered by current detonators, but also allows mastering specific cases that were difficult to control with the current technology, such as: vibration control; underground blast; and building demolition.

Strategic investment, multimarket interaction and competitive advantage: An application to the natural gas industry

OpenAIRE

Ritz, R. A.

2016-01-01

This paper presents a game-theoretic analysis of multimarket competition with strategic capacity investments, motivated by recent developments in international natural gas markets. It studies the competitive implications of heterogeneity in firm structure arising from asset specificity. A single-market focus confers advantage even in the absence of superior value or cost. Lower costs and a sharper organizational focus are self-enforcing in generating competitive advantage. This establishes a ...

Self-ignition of explosive substance. Comparison between analytical and numerical calculations in order to optimize safety in a pyrotechnic context; Auto-inflammation de substances explosives. Comparaison entre calcul analytique et numerique en vue d`une optimisation dans le domaine de la pyrotechnie

Energy Technology Data Exchange (ETDEWEB)

Gillard, Ph. [Centre National de la Recherche Scientifique (CNRS), 86 - Poitiers (France)

1998-04-01

Self-ignition of energetic material was investigated in order to optimize safety in the field of pyrotechnic applications. Two approaches were used; the first one is relative to Frank-Kamenetskii stationary thermal explosion theory. The second approach consists of a choice of some numerical solutions of heat conduction equations in a non-stationary state. Comparison between these results was carried out in order to find the numerical scheme which is the most compatible with Frank-Kamenetskii stationary thermal explosion theory. Numerical data were used for three explosive substances. One of them was studied by the author. In all cases, the numerical stationary state is in agreement with the Frank-Kamenetskii stationary thermal explosion theory, more or less accurately. From this comparison, it may be concluded that it is preferable, for this kind of problem, to use an implicit scheme with linearization of the heat source term. Explicit numerical methods, with or without the addition of the heat term with the Zinn and Mader scheme are revealed to be less accurate and to need a greater optimization of spatial and temporal meshing. (author) 7 refs.

Diplomatic advantages and threats in global health program selection, design, delivery and implementation: development and application of the Kevany Riposte.

Science.gov (United States)

Kevany, Sebastian

2015-05-27

, (3) intervention-related environmental concerns, and (4) a lack of prima facie consideration of intervention diplomatic and foreign policy consequences. Global health interventions stand to generate significant diplomatic advantages for donor and recipient countries and organizations when appropriately selected, designed, targeted, and delivered. Conversely, in the absence of the application of standards such as those developed under the Kevany Riposte, threats to diplomacy and international relations may occur. With the application of related systems to other global health programmes and settings, comparative results on the relative worth of alternate approaches from the diplomatic perspective may be generated to better inform political, strategic, and global health policy and programmatic decisions.

Scandinavian Cooperative Advantage

DEFF Research Database (Denmark)

Strand, Robert; Freeman, R. Edward

2015-01-01

. We conclude by endorsing the expression “Scandinavian cooperative advantage” in an effort to draw attention to the Scandinavian context and encourage the field of strategic management to shift its focus from achieving a competitive advantage toward achieving a cooperative advantage....

Accessing offshoring advantages

DEFF Research Database (Denmark)

Mykhaylenko, Alona; Motika, Agnes; Wæhrens, Brian Vejrum

2015-01-01

. Assuming that different levels of synergy may exist between particular offshoring strategic decisions (choosing offshore outsourcing or captive offshoring and the type of function) and different offshoring advantages, this work advocates that the actual fact of realization of certain offshoring advantages...

Peran Strategic Entrepreneurship dalam Membangun Sustainable Competitive Advantage

Directory of Open Access Journals (Sweden)

Agustinus Dedy Handrimurtjahjo

2014-11-01

Full Text Available Strategic entrepreneurship has emerged as a new concept in examining convergence in entrepreneurship studies (opportunity-seeking behavior and strategic management (advantage-seeking behavior. Studies in the area of strategic management have gradually exposed the relationship betweenstrategic management and entrepreneurship: entrepreneurial strategy making; intrapreneurship; entrepreneurial strategic posture within organizations; entrepreneurial orientation; strategic managementintegration as a context for entrepreneurial actions; and entrepreneurship theory with strategic management and the resource-based view (RBV. A conceptual model of SE that has been developed by Ireland et al.suggested that a firm which linearly and sequentially: employs an entrepreneurial mindset to identify opportunities; manages resources strategically to tackle the opportunity; applies creativity and innovation; andgenerates a competitive advantage is strategic and entrepreneurship operation. Managers must maximize the pursuit of new business opportunities while simultaneously maximize the generation and application of temporary competitive advantages to sustainably create organizational value. This paper develops a conceptual framework that demonstrate the role of strategic entrepreneurship in building sustainable competitiveadvantage.

COMPETITIVE PRODUCT ADVANTAGES

Directory of Open Access Journals (Sweden)

Adrian MICU

2006-01-01

Full Text Available Cost advantages may be either internal or external. Internal economics of scope, scale, or experience, and external economies of focus or logistical integration, enable a company to produce some products at a lower cost than the competition. The coordination of pricing with suppliers, although not actually economizing resources, can improve the efficiency of pricing by avoiding the incrementalization of a supplier's nonincremental fixed costs and profit. Any of these strategies can generate cost advantages that are, at least in the short run, sustainable. Even cost advantages that are not sustainable, however, can generate temporary savings that are often the key to building more sustainable cost or product advantages later.. Even when a product's physical attributes are not readily differentiable, opportunities to develop product advantages remain. The augmented product that customers buy is more than the particular product or service exchanged. It includes all sorts of ancillary services and intangible relationships that make buying thesame product from one company less difficult, less risky, or more pleasant than buying from a competitor. Superior augmentation of the same basic product can add substantial value in the eyes of consumers, leading them to pay willingly what are often considerable price premiums.

ADVANTAGES OF DIFFRACTIVE OPTICAL ELEMENTS APPLICATION IN SIMPLE OPTICAL IMAGING SYSTEMS

Directory of Open Access Journals (Sweden)

N. D. Zoric

2015-01-01

Full Text Available The paper deals with the influence of diffractive optical elements on the optical aberrations. The correction of optical aberrations was investigated in the simple optical systems with one and two lenses (singlet and doublet. The advantages of diffractive optical elements are their ability to generate arbitrary complex wave fronts from a piece of optical material that is essentially flat. The optical systems consisting of the standard surfaces were designed and optimized by using the same starting points. Further, the diffractive and aspheric surfaces were introduced into the developed systems. The resulting hybrid systems were optimized. To compare the complicity of the development of narrow field systems and wide field optical systems, the optimization has been done separately for these two types of the instruments. The optical systems were designed by using special Optical Design Software. Тhe characteristics of designed diffractive surfaces were controlled in Software DIFSYS 2.30. Due to the application of diffractive optical elements the longitudinal chromatic aberration was 5 times reduced for the narrow field systems. The absolute value of Seidel coefficient related to the spherical aberration was reduced in the range of 0.03. Considering that diffractive optical elements have the known disadvantages, like possible parasitic diffraction orders and probable decrease of the transmission, we also developed and analyzed the optical systems with combined aspheric and diffractive surfaces. A combination of the aspheric and diffractive surfaces in the optical disk system of the disk reading lens, gave cutting down of the longitudinal color aberrations almost 15 times on-axis, comparing to the lens consisting of the aspherical and standard surfaces. All of the designed diffractive optical elements possess the parameters within the fabrication limits.

ERDA with an external helium ion micro-beam: Advantages and potential applications

International Nuclear Information System (INIS)

Calligaro, T.; Castaing, J.; Dran, J.-C.; Moignard, B.; Pivin, J.-C.; Prasad, G.V.R.; Salomon, J.; Walter, P.

2001-01-01

Preliminary ERDA experiments at atmospheric pressure have been performed with our external microprobe set-up currently used for the analysis of museum objects by PIXE, RBS and NRA. The objective was to check the feasibility of hydrogen (and deuterium) profiling with an external beam of 3-MeV helium ions. The standard scattering geometry (incident beam at 15 deg. with respect to sample surface and emerging protons or deuterons at 15 deg. in the forward direction) was kept, but the thin foil absorber was replaced by helium gas filling the space between the beam spot and the detector over a distance of about 84 mm. Several standards prepared by ion implantation, with well known H or D depth profiles, were first analysed, which indicated that the analytical capability was as good as under vacuum. A striking feature is the much lower surface peak than under vacuum, a fact that enhances the sensitivity for H analysis near the surface. The same type of measurement was then performed on different materials to show the usefulness of the technique. As a first example, we have checked that the incorporation of H or D into sapphire crystals during mechanical polishing is below the detection limit. Another example is the measurement of the H content in emeralds which can be used as an additional compositional criterion for determining the provenance of emeralds set in museum jewels. The advantages and limitations of our set-up are discussed and several possible applications in the field of cultural heritage are described

New Models for Value Creation and Competitive Advantage in the Petroleum Industry

OpenAIRE

Stabell, Charles

2001-01-01

This research project has applied, tested and further developed a set of new models for the analysis of value creation and competitive advantage in the context of the global petroleum industry. The basic idea behind the project was that Porter’s value chain model (1985) for the analysis of firm-level competitive advantage was basically only applicable to manufacturing. Building on Thompson’s (1967) distinction between long-linked, intensive and mediating value creation technologies, we propos...

MJERENJE SILE UDARNOG VALA INDIREKTNIM METODAMA

OpenAIRE

Dobrilović, Mario; Ester, Zvonimir; Kujundžić, Trpimir

2005-01-01

Tests have been conducted at the “Laboratory for testing of civil explosives, detonators, electrical detonators and pyrotechnical materials”, Department for mining and geotechnics of the Faculty of mining, geology and petroleum engineering, University of Zagreb with the purpose of designing a detonator that would unite advantages of a non-electric system and the precision in regulation of time delay in electronic initiation system. Sum of energy released by the wave force in shock tube is a p...

Chemistry of high-energy materials. 2. ed.

Energy Technology Data Exchange (ETDEWEB)

Klapoetke, Thomas M. [Munich Univ. (Germany). Chair of Inorganic Chemistry; Maryland Univ., College Park, MD (United States). Center of Energetic Concepts Development (CECD)

2012-07-01

This graduate-level textbook treats the basic chemistry of high energy materials - primary and secondary explosives, propellants, rocket fuel and pyrotechnics - and provides a review of new research developments. Applications in both military and civil fields are discussed. The book also offers new insights into ''green'' chemistry requirements and strategies for military applications.

Competitive advantage with e-business : a survey of large American and Swedish firms

OpenAIRE

Beheshti, Hooshang; Salehi-Sangari, Esmail; Engström, Anne

2006-01-01

Advances in information and communications technology have allowed for a wide range of electronic business models and applications. These applications are providing a competitive advantage for organizations by creating efficiencies and cost reductions. Electronic business should be part of the overall corporate strategy and be integrated into core business processes. This study provides interesting insights into electronic business applications in large corporations and discusses similarities...

Machine learning in manufacturing: advantages, challenges, and applications

Directory of Open Access Journals (Sweden)

Thorsten Wuest

2016-01-01

Full Text Available The nature of manufacturing systems faces ever more complex, dynamic and at times even chaotic behaviors. In order to being able to satisfy the demand for high-quality products in an efficient manner, it is essential to utilize all means available. One area, which saw fast pace developments in terms of not only promising results but also usability, is machine learning. Promising an answer to many of the old and new challenges of manufacturing, machine learning is widely discussed by researchers and practitioners alike. However, the field is very broad and even confusing which presents a challenge and a barrier hindering wide application. Here, this paper contributes in presenting an overview of available machine learning techniques and structuring this rather complicated area. A special focus is laid on the potential benefit, and examples of successful applications in a manufacturing environment.

User costs as one of main advantages of precast concrete application in highway construction

Science.gov (United States)

Tomek, Radan

2017-09-01

Road user cost primarily refer to the monetized components of road (re)construction impacts, such as the user delay costs, vehicle operating costs, crash costs and emission costs. Objective of this paper is to analyze and appraise the advantages and benefits of the innovative prefabrication approach in contrast to traditional cast-in-place construction method. The goal is to reduce these additional costs borne by motorists and the community at-large as a result of road construction activity to their minimum through application of the prefabrication. Assessing two basic possible approaches to highway infrastructure construction - casting the road pavements and structures either in place or precast off the site - it can be concluded that the initial capital investment costs do not vary much. Substantial differences can be recognized when comparing their life-cycle costs and an extent to which their construction process affects the public, environment and the local economy. Prefabrication of any structure component off-site offers major construction time and user cost savings in comparison with the traditional cast-in-place methods of construction. Precast prestressed road pavements’ technology and precasting bridges’ parts and elements offers dramatic increase in durability, while it also substantially decreases construction time and resulting user costs.

Brokers and Competitive Advantage

OpenAIRE

Michael D. Ryall; Olav Sorenson

2007-01-01

The broker profits by intermediating between two (or more) parties. Using a biform game, we examine whether such a position can confer a competitive advantage, as well as whether any such advantage could persist if actors formed relations strategically. Our analysis reveals that, if one considers exogenous the relations between actors, brokers can enjoy an advantage but only if (1) they do not face substitutes either for the connections they offer or the value they can create, (2) they interm...

Generic Advantages

Indian Academy of Sciences (India)

First page Back Continue Last page Overview Graphics. Generic Advantages. Scalability an incremental coverage. Standardization. Business Plan Flexibility. Lifecycle Flexibility. Reliability. Service Interoperability. Changed Industry dynamics.

Advantage of irradiation in food industry, technical and economical constraints

International Nuclear Information System (INIS)

Dupuy, P.

1986-01-01

Irradiation is an effective method to extend the conservation and to increase the hygienic security of food. Nevertheless the use of irradiation remains limited in food industry. The prospects of different applications are evaluated, referring to the other alternative technologies. The advantage of adequate irradiation facilities incorporated or not into the plants are compared [fr

Home advantage in professional tennis

NARCIS (Netherlands)

Koning, Ruud H.

2011-01-01

Home advantage is a pervasive phenomenon in sport. It has been established in team sports such as basketball, baseball, American football, and European soccer. Attention to home advantage in individual sports has so far been limited. The aim of this study was to examine home advantage in

Integration of optical fibers in radiative environments: Advantages and limitations

International Nuclear Information System (INIS)

Girard, S.; Ouerdane, Y.; Boukenter, A.; Marcandella, C.; Bisutti, J.; Baggio, J.; Meunier, J. P.

2011-01-01

We review the advantages and limitations for the integration of optical fibers in radiative environments. Optical fibers present numerous advantages for applications in harsh environments such as their electromagnetic immunity. This explains the increasing interest of the radiation effects community to evaluate their vulnerability for future facilities. However, it is also well-known that optical fibers suffer from a degradation of their macroscopic properties under irradiation. We illustrate the major mechanisms and parameters that govern the degradation mechanism, mainly the radiation-induced attenuation phenomena. We focus on the fiber transient radiation responses when exposed to the pulsed and mixed environment associated with the Megajoule class lasers devoted to the fusion by inertial confinement study. (authors)

Competitive advantage and corporate communications

Directory of Open Access Journals (Sweden)

Mitić Sanja

2013-01-01

Full Text Available Strategic importance of corporate communications and its role in the development of competitive advantage has attracted interest of numerous researchers in the fields of organization, management, marketing and public relations. Recent studies particularly emphasise the growing importance of soft factors, such as reputation in the development of competitive advantage. Concept of reputation is strongly connected with stakeholder theory, which stresses the importance of corporate communications for competitive advantage of firms. The paper focuses on competitive advantage and the link among strategy, reputation and corporate communications.

Bio-sensing applications of cerium oxide nanoparticles: Advantages and disadvantages.

Science.gov (United States)

Charbgoo, Fahimeh; Ramezani, Mohammad; Darroudi, Majid

2017-10-15

Cerium oxide nanoparticles (CNPs) contain several properties such as catalytic activity, fluorescent quencher and electrochemical, high surface area, and oxygen transfer ability, which have attracted considerable attention in developing high-sensitive biosensors. CNPs can be used as a whole sensor or a part of recognition or transducer element. However, reports have shown that applying these nanoparticles in sensor design could remarkably enhance detection sensitivity. CNP's outstanding properties in biosensors which go from high catalytic activity and surface area to oxygen transfer and fluorescent quenching capabilities are also highlighted. Herein, we discuss the advantages and disadvantages of CNPs-based biosensors that function through various detection modes including colorimetric, electrochemistry, and chemoluminescent regarding the detection of small organic chemicals, metal ions and biomarkers. Copyright © 2017 Elsevier B.V. All rights reserved.

An intriguing oscillating combustion phenomenon

NARCIS (Netherlands)

Corbel, J.M.L.; Lingen, J.N.J.; Zevenbergen, J.F.; Gijzeman, O.L.J.; Meijerink, A.

2012-01-01

Strobes are pyrotechnic compositions that emit bright flashes of white or colored light at regular time intervals. The strobe effect has applications in various fields, most notably in the fireworks industry and in the military area (signaling – missile decoys – crowd control). However, the chemical

Investment in intellectual capital and achievement of the competitive advantage in hotel sector

Directory of Open Access Journals (Sweden)

Qasim Mohammed Dahash

2018-07-01

Full Text Available The primary objective of the research paper is to provide some insights on the concepts of intellec-tual capital and its important dimensions alongside to investigate the possible association between intellectual capital and attainment of competitive advantage. This study focuses on Iraqi hotel industry which is an under-research area in the context of intellectual capital and its relationship with competitive advantage. An adapted questionnaire was utilized to collect the responses from top and middle level managers of four and five-star hotels in Iraq. The reliability and validity of data collec-tion instrument were measured through Cronbach’s alpha, Composite Reliability and Average Var-iance Extracted respectively. The competitive advantage was then regressed against Human, Rela-tional and Structural capital by application of Partial Least Square methodology. Results of the study showed a positive and strong connotation among intellectual capital and attainment of competitive advantage. The human capital had the highest contribution for competitive advantage in hotel sector of Iraq. The top management of hotels should take interest to develop, maintain and retain human capital to attain competitive advantage over competitors.

Gaining Relational Competitive Advantages

DEFF Research Database (Denmark)

Hu, Yimei; Zhang, Si; Li, Jizhen

2015-01-01

Establishing strategic technological partnerships (STPs) with foreign partners is an increasingly studied topic within the innovation management literature. Partnering firms can jointly create sources of relational competitive advantage. Chinese firms often lack research and development (R......&D) capabilities but are increasingly becoming preferred technological partners for transnational corporations. We investigate an STP between a Scandinavian and a Chinese firm and try to explore how to gain relational competitive advantage by focusing on its two essential stages: relational rent generation...... and appropriation. Based on an explorative case study, we develop a conceptual framework that consists of process, organizational alliance factors, and coordination modes that we propose lead to relational competitive advantage....

Taking advantage of Google's Web-based applications and services.

Science.gov (United States)

Brigham, Tara J

2014-01-01

Google is a company that is constantly expanding and growing its services and products. While most librarians possess a "love/hate" relationship with Google, there are a number of reasons you should consider exploring some of the tools Google has created and made freely available. Applications and services such as Google Docs, Slides, and Google+ are functional and dynamic without the cost of comparable products. This column will address some of the issues users should be aware of before signing up to use Google's tools, and a description of some of Google's Web applications and services, plus how they can be useful to librarians in health care.

COMPETITIVE ADVANTAGE IN THE ENTERPRISE PERFORMANCE

Directory of Open Access Journals (Sweden)

PRUNEA Ana Daniela

2014-07-01

Full Text Available Rapid changes in market characteristics and the technological innovations are common and faster challenges, resulting in products, processes and technologies. The competitive advantage is volatile, difficult to obtain and more difficult to maintain and strengthened with consumers who through their individual choices polarization confirms the recognition performance and award competitive advantages, thus causing the competitive ranking of companies present in a particular market. The competitive advantage lies in the focus of the performance of companies in competitive markets and innovation is a source for obtaining and consolidating it. Companies will need to demonstrate the capacity to adapt to changes in the business environment so as to maintain the helded positions. This paper treats this aspect behavior that companies should adopt to get on the account of innovation a sustainable competitive advantage. I started of the work in the elaboration from the theory of developed by Michael Porter in his book "Competitive Advantage: Creating and Sustaining Superior Performance" we applied methods listed thus trying to point out possible ways of creating competitive advantage by companies. We have presented the sources of competitive advantage and the factors on which depends its creation. Walking theoretical research revealed how lack of competitive advantage leads to a lack of competitiveness of companies and the benefits that arise with the creation of this type of asset. Among the most important benefits is to increase performances. Once the competitive advantage is achieved, it must be maintained and updated market conditions and the methods that can be created a sustainable competitive advantage represent the answers to many of the companies questions are fighting for survival in an environment of fierce competition. The implementation of methods for obtaining competitive advantages, but also exist dangers, that every company should know them

Ventil

OpenAIRE

Schmidt, U.; Schuetz, H.G.; Meinel, M.; Buehling, H.

1998-01-01

The valve, especially as an overload safety valve for a mechanical press, has a mechanical lock on the valve piston (1) in the pressure medium flow path between an entry (7) and outlet (9) opening. The lock is a screw which is broken by a pyrotechnic or explosive action. The valve piston (1) has the structure of a step piston, where it is under loading from the pressure medium. USE - The safety valve is for protection of a mechanical press from damage through overloading. ADVANTAGE - The stru...

Advantages and applicability of commonly used homogenisation methods for climate data

Science.gov (United States)

Ribeiro, Sara; Caineta, Júlio; Henriques, Roberto; Soares, Amílcar; Costa, Ana Cristina

2014-05-01

provided for each method. Their advantages and applicability are discussed based on literature review and on the results of the HOME project. Acknowledgements: The authors gratefully acknowledge the financial support of "Fundação para a Ciência e Tecnologia" (FCT), Portugal, through the research project PTDC/GEO-MET/4026/2012 ("GSIMCLI - Geostatistical simulation with local distributions for the homogenization and interpolation of climate data").

Comparative Advantage

DEFF Research Database (Denmark)

Zhang, Jie; Jensen, Camilla

2007-01-01

that are typically explained from the supply-side variables, the comparative advantage of the exporting countries. A simple model is proposed and tested. The results render strong support for the relevance of supply-side factors such as natural endowments, technology, and infrastructure in explaining international...

Operational advantages of using Cyber Electronic Warfare (CEW) in the battlefield

Science.gov (United States)

Yasar, Nurgul; Yasar, Fatih M.; Topcu, Yucel

2012-06-01

While cyberspace is emerging as a new battlefield, conventional Electronic Warfare (EW) methods and applications are likely to change. Cyber Electronic Warfare (CEW) concept which merges cyberspace capabilities with traditional EW methods, is a new and enhanced form of the electronic attack. In this study, cyberspace domain of the battlefield is emphazised and the feasibility of integrating Cyber Warfare (CW) concept into EW measures is researched. The SWOT (Strengths, Weaknesses, Opportunities and Threats) analysis method is used to state the operational advantages of using CEW concept in the battlefield. The operational advantages of CEW are assessed by means of its effects on adversary air defense systems, communication networks and information systems. Outstanding technological and operational difficulties are pointed out as well. As a result, a comparison of CEW concept and conventional EW applications is presented. It is concluded that, utilization of CEW concept is feasible at the battlefield and it may yield important operational advantages. Even though the computers of developed military systems are less complex than normal computers, they are not subjected to cyber threats since they are closed systems. This concept intends to show that these closed systems are also open to the cyber threats. As a result of the SWOT analysis, CEW concept provides Air Forces to be used in cyber operations effectively. On the other hand, since its Collateral Damage Criteria (CDC) is low, the usage of cyber electronic attack systems seems to grow up.

Advantages of floating covers with LLDPE Liners

International Nuclear Information System (INIS)

Munoz Gomez, J. M.

2014-01-01

Using floating covers in irrigation pounds and waste dam gives many advantages. It is a very interesting investment for those place with a high evaporation ratio. this is an easy system which improves several aspects in irrigation or drinkable water reservoirs, mainly it saves water and it saves clean-works (time and cost). It is also used in waste dam to deodorization. Time ago this application was developed with PVC liners and TPO liners, now the innovation is LLDPE liners which improve mechanical properties, durability and an easier installation. This paper develops the state of art of this design technology, and the back ground of our experience. (Author)

Advantages, properties and types of coatings on non-oriented electrical steels

Energy Technology Data Exchange (ETDEWEB)

Lindenmo, M.; Coombs, A.; Snell, D

2000-06-02

Electrical steels used for motor, transformer and generator applications are usually coated with an insulation coating in order to improve the performance of the material in terms of reduced power loss, punching and welding characteristics and corrosion resistance. The advantages, properties and types of insulation coatings available at European Electrical Steels are discussed in this paper.

77 FR 52636 - Hazardous Materials: Revision to Fireworks Regulations (RRR)

Science.gov (United States)

2012-08-30

....4G consumer fireworks complies with the American Pyrotechnics Association's (APA) Standard 87-1 (IBR... processing of consumer fireworks applications, resulting in faster time to market for each firework device... industry, 50 percent of records will be stored in paper format and 50 percent of records will be stored in...

Advantaged Bidders in Franchise Auctions

OpenAIRE

van den Berg, V.A.C.

2012-01-01

Consider a government that auctions a franchise for, e.g., an airport, telecommunication network, or utility. Consider an 'incumbent bidder' that owns a complement or substitute. With an auction on the transfer (i.e. payment) to the government, the incumbent is advantaged.If the government regulates the market with an auction on the price asked to consumers, it depends who is advantaged. With complements, the incumbent is advantaged: it can set a lower price on the new franchise, as this inc...

New Classes of Applications in the Cloud. Evaluating Advantages and Disadvantages of Cloud Computing for Telemetry Applications

OpenAIRE

Anca APOSTU; Florina PUICAN; Geanina ULARU; George SUCIU; Gyorgy TODORAN

2014-01-01

Nowadays companies are moving some parts of their businesses to the cloud. Industry predictions are that this trend will continue to grow and develop even further in the coming few years. While Cloud computing is undoubtedly beneficial for mid-size to large companies, it is not without its downsides, especially for smaller businesses. This paper's aim is to deliver an analysis based on advantages and disadvantages of Cloud computing technology, in order to help organizations fully understand ...

Advantages and Applications of CAR-Expressing Natural Killer Cells

Directory of Open Access Journals (Sweden)

Wolfgang eGlienke

2015-02-01

Full Text Available In contrast to donor T cells, natural killer (NK cells are known to mediate anti-cancer effects without the risk of inducing graft-versus-host disease (GvHD. In order to improve cytotoxicity against resistant cancer cells, auspicious efforts have been made with chimeric antigen receptor (CAR expressing T- and NK cells. These CAR-modified cells express antigen receptors against tumor-associated surface antigens, thus redirecting the effector cells and enhancing tumor-specific immunosurveillance. However, many cancer antigens are also expressed on healthy tissues, potentially leading to off tumor/ on target toxicity by CAR-engineered cells. In order to control such potentially severe side effects, the insertion of suicide genes into CAR-modified effectors can provide a means for efficient depletion of these cells. While CAR-expressing T cells have entered successfully clinical trials, experience with CAR-engineered NK cells is mainly restricted to pre-clinical investigations and predominantly to NK cell lines. In this review we summarize the data on CAR expressing NK cells focusing on the possible advantage using these short-lived effector cells and discuss the necessity of suicide switches. Furthermore, we address the compliance of such modified NK cells with regulatory requirements as a new field in cellular immunotherapy.

Green synthesis of nanoparticles: Their advantages and disadvantages

Science.gov (United States)

Parveen, Khadeeja; Banse, Viktoria; Ledwani, Lalita

2016-04-01

The nanotechnology and biomedical sciences opens the possibility for a wide variety of biological research topics and medical uses at the molecular and cellular level. The biosynthesis of nanoparticles has been proposed as a cost-effective and environmentally friendly alternative to chemical and physical methods. Plant-mediated synthesis of nanoparticles is a green chemistry approach that connects nanotechnology with plants. Novel methods of ideally synthesizing NPs are thus thought that are formed at ambient temperatures, neutral pH, low costs and environmentally friendly fashion. Keeping these goals in view nanomaterials have been synthesized using various routes. Among the biological alternatives, plants and plant extracts seem to be the best option. Plants are nature's "chemical factories". They are cost efficient and require low maintenance. The advantages and disadvantages of nanotechnology can be easily enumerated. This study attempts to review the diversity of the field, starting with the history of nanotechnology, the properties of the nanoparticle, various strategies of synthesis, the many advantages and disadvantages of different methods and its application.

Biological Treatment of Drinking Water: Applications, Advantages and Disadvantages

Science.gov (United States)

The fundamentals of biological treatment are presented to an audience of state drinking water regulators. The presentation covers definitions, applications, the basics of bacterial metabolism, a discussion of treatment options, and the impact that implementation of these options...

Mechanistic Basis of Cocrystal Dissolution Advantage.

Science.gov (United States)

Cao, Fengjuan; Amidon, Gordon L; Rodríguez-Hornedo, Naír; Amidon, Gregory E

2018-01-01

Current interest in cocrystal development resides in the advantages that the cocrystal may have in solubility and dissolution compared with the parent drug. This work provides a mechanistic analysis and comparison of the dissolution behavior of carbamazepine (CBZ) and its 2 cocrystals, carbamazepine-saccharin (CBZ-SAC) and carbamazepine-salicylic acid (CBZ-SLC) under the influence of pH and micellar solubilization. A simple mathematical equation is derived based on the mass transport analyses to describe the dissolution advantage of cocrystals. The dissolution advantage is the ratio of the cocrystal flux to drug flux and is defined as the solubility advantage (cocrystal to drug solubility ratio) times the diffusivity advantage (cocrystal to drug diffusivity ratio). In this work, the effective diffusivity of CBZ in the presence of surfactant was determined to be different and less than those of the cocrystals. The higher effective diffusivity of drug from the dissolved cocrystals, the diffusivity advantage, can impart a dissolution advantage to cocrystals with lower solubility than the parent drug while still maintaining thermodynamic stability. Dissolution conditions where cocrystals can display both thermodynamic stability and a dissolution advantage can be obtained from the mass transport models, and this information is useful for both cocrystal selection and formulation development. Copyright © 2018 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Advantages of semiconductor CZT for medical imaging

Science.gov (United States)

Wagenaar, Douglas J.; Parnham, Kevin; Sundal, Bjorn; Maehlum, Gunnar; Chowdhury, Samir; Meier, Dirk; Vandehei, Thor; Szawlowski, Marek; Patt, Bradley E.

2007-09-01

Cadmium zinc telluride (CdZnTe, or CZT) is a room-temperature semiconductor radiation detector that has been developed in recent years for a variety of applications. CZT has been investigated for many potential uses in medical imaging, especially in the field of single photon emission computed tomography (SPECT). CZT can also be used in positron emission tomography (PET) as well as photon-counting and integration-mode x-ray radiography and computed tomography (CT). The principal advantages of CZT are 1) direct conversion of x-ray or gamma-ray energy into electron-hole pairs; 2) energy resolution; 3) high spatial resolution and hence high space-bandwidth product; 4) room temperature operation, stable performance, high density, and small volume; 5) depth-of-interaction (DOI) available through signal processing. These advantages will be described in detail with examples from our own CZT systems. The ability to operate at room temperature, combined with DOI and very small pixels, make the use of multiple, stationary CZT "mini-gamma cameras" a realistic alternative to today's large Anger-type cameras that require motion to obtain tomographic sampling. The compatibility of CZT with Magnetic Resonance Imaging (MRI)-fields is demonstrated for a new type of multi-modality medical imaging, namely SPECT/MRI. For pre-clinical (i.e., laboratory animal) imaging, the advantages of CZT lie in spatial and energy resolution, small volume, automated quality control, and the potential for DOI for parallax removal in pinhole imaging. For clinical imaging, the imaging of radiographically dense breasts with CZT enables scatter rejection and hence improved contrast. Examples of clinical breast images with a dual-head CZT system are shown.

Compositional Advantage and Strategy

DEFF Research Database (Denmark)

Li, Xin

advantage is redefined as the attractiveness of the composition of the producer’s offering in terms of scope and perceived value/price ratio. I identify five ways or basic compositional strategies to improve the value/price ratio. A firm may have an overall compositional strategy that is composed of some......In this paper, I first critique the composition-based view of Yadong Luo and John Child for understanding how resource-poor firms survive and thrive. To remedy the deficiencies in their perspective, I then propose a dynamic theory of compositional advantage and strategy. Here, the compositional...... or all of the five basic compositional strategies. I argue there are three indispensable key success factors for a composition-based competition, i.e., aspiration (ambition-position asymmetry), attitude (being ALERT), and action (turning asymmetry into advantage). I also discuss the particular relevance...

Integration of optical fibers in mega-joule class laser environments: advantages and limitations

International Nuclear Information System (INIS)

Girard, S.; Marcandella, C.; Bisutti, J.; Ouerdane, Y.; Boukenter, A.; Meunier, J.P.; Baggio, J.

2012-01-01

We review the advantages and limitations for the integration of optical fibers in the radiative environment associated with Megajoule class lasers as Laser Megajoule (LMJ) in France or National Ignition Facility (NIF) in the USA. Optical fibers present numerous advantages, like their electromagnetic immunity, for integration in these facilities devoted to the fusion by inertial confinement studies. Despite these advantages, it is also well-known that optical fibers suffer from a degradation of their macroscopic properties under irradiation, limiting their transmission capability. We studied the major mechanisms governing the amplitude of this degradation, focusing our discussion on the transient radiation-induced attenuation (RIA) phenomena that is often the limiting factor for LMJ applications. The amplitude and growth and decay kinetics of RIA are affected by different parameters related to the fibers themselves but also depend on the application and irradiation characteristics. We particularly investigated the fiber transient radiation responses when the optical links have to operate during the pulsed and mixed environment associated with ignition shots. Our study shows that, if the same parameters affect the fiber sensitivity for steady state and transient irradiations, the radiation tolerances of the different classes of waveguides strongly differ, implying dedicated experiments for LMJ facility needs. (authors)

Application of Knowledge in Advergaming as a Possible Source of Competitive Advantage

Directory of Open Access Journals (Sweden)

Mráček Pavel

2011-09-01

Full Text Available The article focuses on the question of the utilization of knowledge in advergaming (an original tool of the marketing communication as a possible source of competitive advantage. Related terms are briefly described and the research was conducted within a group of young people in the Czech Republic. The research confirms that, just advergaming might have the potential for acquiring “consumers of the advertising message” and, consequently, the possible broadening of the knowledge of the company. The output then becomes the scheme for displaying the links and the utilization of the knowledge in the advergame itself.

Advantages of robotics in benign gynecologic surgery.

Science.gov (United States)

Truong, Mireille; Kim, Jin Hee; Scheib, Stacey; Patzkowsky, Kristin

2016-08-01

The purpose of this article is to review the literature and discuss the advantages of robotics in benign gynecologic surgery. Minimally invasive surgery has become the preferred route over abdominal surgery. The laparoscopic or robotic approach is recommended when vaginal surgery is not feasible. Thus far, robotic gynecologic surgery data have demonstrated feasibility, safety, and equivalent clinical outcomes in comparison with laparoscopy and better clinical outcomes compared with laparotomy. Robotics was developed to overcome challenges of laparoscopy and has led to technological advantages such as improved ergonomics, visualization with three-dimensional capabilities, dexterity and range of motion with instrument articulation, and tremor filtration. To date, applications of robotics in benign gynecology include hysterectomy, myomectomy, endometriosis surgery, sacrocolpopexy, adnexal surgery, tubal reanastomosis, and cerclage. Though further data are needed, robotics may provide additional benefits over other approaches in the obese patient population and in higher complexity cases. Challenges that arose in the earlier adoption stage such as the steep learning curve, costs, and operative times are becoming more optimized with greater experience, with implementation of robotics in high-volume centers and with improved training of surgeons and robotic teams. Robotic laparoendoscopic single-site surgery, albeit still in its infancy where technical advantages compared with laparoscopic single-site surgery are still unclear, may provide a cost-reducing option compared with multiport robotics. The cost may even approach that of laparoscopy while still conferring similar perioperative outcomes. Advances in robotic technology such as the single-site platform and telesurgery, have the potential to revolutionize the field of minimally invasive gynecologic surgery. Higher quality evidence is needed to determine the advantages and disadvantages of robotic surgery in benign

PERSPECTIVE: Fireworks and radioactivity

Science.gov (United States)

Breitenecker, Katharina

2009-09-01

Katharina Breitenecker Fireworks, the one and only amongst all other pyrotechnic applications, have pleased the hearts and minds of billions of people all over the world for almost 1000 years. Even though pyrotechnics were originally developed in order to fulfil the needs of military purposes, fireworks began to form a unique part of the cultural heritage of many countries, presumably starting in ancient China during the Song Dynasty (960-1280 AD). Festivities like New Year's Eve, national holidays or activities like music festivals and parish fairs are crowned by a firework display. Fireworks have traditionally been associated with Independence Day celebrations, like 4 July in the United States, Guy Fawkes' Night (5 November) in Britain, or Bastille Day (14 July) in France. Much of Chinese culture is associated with the use of firecrackers to celebrate the New Year and other important occasions. The fascination of fireworks and firecrackers is due to the brilliant colours and booming noises, which have a universal appeal to our basic senses [1]. The basic components of any traditional civil firework is black powder, a mixture of about 75% potassium nitrate, 15% charcoal, and about 10% sulfur [2]. Without the addition of a colouring agent, the fuel would provide an almost white light. Therefore, several metal salts can be added to cause colourful luminescence upon combustion. In general barium is used to obtain a green coloured flame, strontium for red, copper for blue and sodium for yellow [2, 3]. The use of pyrotechnics has raised issues pertaining to health concerns. The health aspects are not only restricted to injuries by accidental ignition of certain devices. Moreover, several recent works identified fireworks and pyrotechnics as causing environmental pollution, which might result in a potential hazard concerning health aspects. The fundamental problem in this respect is that all chemicals used are dispersed in the environment by combustion. This includes

Processing with kW fibre lasers: advantages and limits

Science.gov (United States)

Kratky, A.; Schuöcker, D.; Liedl, G.

2008-10-01

Up-to-date fibre lasers produce multi-kw radiation with an excellent beam quality. Compared to CO2-lasers, fibre lasers have relatively low operational costs and offer a very high flexibility in production due to the beam delivery with process fibres. As a consequence, fibre lasers have attracted more and more attention. On the other hand, their use in industrial applications especially in the automotive industry is still limited to a certain extent and fibre lasers haven't replaced all other laser sources till now as it could be expected. In laser cutting, the small kerf width produced by fibre lasers should be advantageous since the heated volume is smaller compared to CO2-lasers. In fact, cutting velocities are usually much higher which is also caused by the higher absorption coefficient of most metals at the wavelength emitted by fibre lasers. Nevertheless, cutting with fibre lasers of some metals - e.g. stainless steels - is restricted to a small thicknesses of approx. 5mm. The reason for this is that the surface roughness of the edges increases dramatically with the thickness of the work piece. Applications of fibre lasers include e.g. remote welding or even remote cutting of a large variety of materials with usually excellent results. Due to the excellent beam quality the aspect ratio of the weld seam in relation to the penetration depth is quite good. In the case of thin sheet metal welding such a small beam waist is beneficial - but with thicker sheet metals it is very often disadvantageous since the preparation of samples is more complicated, costs increase and requirements on clamping devices rise. In this paper, advantages and disadvantages of fibre lasers are discussed briefly. Applications of a 1.5 kW fibre laser are presented and compared to classical laser systems.

Data-driven battery product development: Turn battery performance into a competitive advantage.

Energy Technology Data Exchange (ETDEWEB)

Sholklapper, Tal [Voltaiq, Inc.

2016-04-19

Poor battery performance is a primary source of user dissatisfaction across a broad range of applications, and is a key bottleneck hindering the growth of mobile technology, wearables, electric vehicles, and grid energy storage. Engineering battery systems is difficult, requiring extensive testing for vendor selection, BMS programming, and application-specific lifetime testing. This work also generates huge quantities of data. This presentation will explain how to leverage this data to help ship quality products faster using fewer resources while ensuring safety and reliability in the field, ultimately turning battery performance into a competitive advantage.

Development of an FPGA-based multipoint laser pyroshock measurement system for explosive bolts

International Nuclear Information System (INIS)

Abbas, Syed Haider; Lee, Jung-Ryul; Jang, Jae-Kyeong; Kim, Zaeill

2016-01-01

Pyroshock can cause failure to the objective of an aerospace structure by damaging its sensitive electronic equipment, which is responsible for performing decisive operations. A pyroshock is the high intensity shock wave that is generated when a pyrotechnic device is explosively triggered to separate, release, or activate structural subsystems of an aerospace architecture. Pyroshock measurement plays an important role in experimental simulations to understand the characteristics of pyroshock on the host structure. This paper presents a technology to measure a pyroshock wave at multiple points using laser Doppler vibrometers (LDVs). These LDVs detect the pyroshock wave generated due to an explosive-based pyrotechnical event. Field programmable gate array (FPGA) based data acquisition is used in the study to acquire pyroshock signals simultaneously from multiple channels. This paper describes the complete system design for multipoint pyroshock measurement. The firmware architecture for the implementation of multichannel data acquisition on an FPGA-based development board is also discussed. An experiment using explosive bolts was configured to test the reliability of the system. Pyroshock was generated using explosive excitation on a 22-mm-thick steel plate. Three LDVs were deployed to capture the pyroshock wave at different points. The pyroshocks captured were displayed as acceleration plots. The results showed that our system effectively captured the pyroshock wave with a peak-to-peak magnitude of 303 741 g. The contribution of this paper is a specialized architecture of firmware design programmed in FPGA for data acquisition of large amount of multichannel pyroshock data. The advantages of the developed system are the near-field, multipoint, non-contact, and remote measurement of a pyroshock wave, which is dangerous and expensive to produce in aerospace pyrotechnic tests.

Development of an FPGA-based multipoint laser pyroshock measurement system for explosive bolts

Energy Technology Data Exchange (ETDEWEB)

Abbas, Syed Haider; Lee, Jung-Ryul [Department of Aerospace Engineering, Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Jang, Jae-Kyeong [The Engineering Institute-Korea, Chonbuk National University, Jeonju (Korea, Republic of); Kim, Zaeill [The 4th R& D Institute-1st directorate, Agency for Defense Development, Daejeon (Korea, Republic of)

2016-07-15

Pyroshock can cause failure to the objective of an aerospace structure by damaging its sensitive electronic equipment, which is responsible for performing decisive operations. A pyroshock is the high intensity shock wave that is generated when a pyrotechnic device is explosively triggered to separate, release, or activate structural subsystems of an aerospace architecture. Pyroshock measurement plays an important role in experimental simulations to understand the characteristics of pyroshock on the host structure. This paper presents a technology to measure a pyroshock wave at multiple points using laser Doppler vibrometers (LDVs). These LDVs detect the pyroshock wave generated due to an explosive-based pyrotechnical event. Field programmable gate array (FPGA) based data acquisition is used in the study to acquire pyroshock signals simultaneously from multiple channels. This paper describes the complete system design for multipoint pyroshock measurement. The firmware architecture for the implementation of multichannel data acquisition on an FPGA-based development board is also discussed. An experiment using explosive bolts was configured to test the reliability of the system. Pyroshock was generated using explosive excitation on a 22-mm-thick steel plate. Three LDVs were deployed to capture the pyroshock wave at different points. The pyroshocks captured were displayed as acceleration plots. The results showed that our system effectively captured the pyroshock wave with a peak-to-peak magnitude of 303 741 g. The contribution of this paper is a specialized architecture of firmware design programmed in FPGA for data acquisition of large amount of multichannel pyroshock data. The advantages of the developed system are the near-field, multipoint, non-contact, and remote measurement of a pyroshock wave, which is dangerous and expensive to produce in aerospace pyrotechnic tests.

Non-Foster Circuits for High Performance Antennas: Advantages and Practical Limitations

Science.gov (United States)

Jacob, Minu Mariam

The demand for miniaturized, broadband communication systems has created a need for electrically small, broadband antennas. However, all passive electrically small antennas have a fundamental gain-bandwidth limitation related to their electrical size, as first described by Wheeler and Chu. This limitation can be overcome using active non-Foster circuits (negative inductors and/or negative capacitors), which can deliver a broadband input match with active matching techniques, or can help reduce phase dispersion using negative delay effects. This thesis will illustrate the advantages of non-Foster circuits in obtaining broadband small antennas, in addition to examining their practical limitations due to noise in receive applications, and nonlinearity in transmit applications.

Methodological approach for the assessment of acute inhalation toxicity of smoke ammunitions by in silico, in vitro and in vivo modelling

NARCIS (Netherlands)

Pradines, E.; Glacial, F.; Medus, D.; Stiee, E.; Fedou, F.; Hulst, M. van; Klerk, W.P.C. de

2015-01-01

Assessing the toxicity of military pyrotechnic products is a growing challenge in the current context of Human and Environment protection. The Allied Ordnance Publication (AOP) 45 and the Standard NATO Agreement (STANAG) 4588 “Guidelines for toxicity testing of smokes, obscurants and pyrotechnics

[Advantages and disadvantages of femtosecond laser assisted LASIK and SMILE].

Science.gov (United States)

Zhang, F J; Sun, M S

2018-01-11

With the development of excimer laser and femtosecond laser equipment, application of diversified and customized surgical decision in modern corneal refractive surgery has been an inevitable trend. However, how to make a personalized decision with an accurate surgical design to achieve better visual quality becomes the main focus in clinical applications. Small-incision lenticule extraction (SMILE) and femtosecond assisted laser in situ keratomileusis (FS-LASIK) have been commonly acknowledged as the mainstream of corneal refractive surgery for ametropia correction nowadays. Both methods have been verified by clinical practice for many years. This article compares and elaborates the different characteristics with advantages and disadvantages of the two methods so as to provide some reasonable treatment options for refractive surgery. (Chin J Ophthalmol, 2018, 54: 7-10) .

Structuring the competitive advantage of printing company

OpenAIRE

Kukharuk A. D.

2013-01-01

The nature of the concept of "competitive advantage of the company" if analyzed. The concept of "structuring a competitive advantage" is suggested. The model of structuring of printing company’s competitive advantage based on fundamentals of stakeholder theory is developed.

76 FR 56262 - Community Advantage Pilot Program

Science.gov (United States)

2011-09-12

... SMALL BUSINESS ADMINISTRATION [Docket No. SBA 2011-0003] Community Advantage Pilot Program AGENCY: U.S. Small Business Administration (SBA). ACTION: Notice of change to Community Advantage Pilot... Community Advantage Pilot Program. In that notice, SBA modified or waived as appropriate certain regulations...

Management Methods and Concepts for Building Competitive Advantage in Hospitality Companies

Directory of Open Access Journals (Sweden)

Gierczak Beata

2014-09-01

Full Text Available Introduction. Competitive advantage determines the success of modern enterprises, such as hospitality companies, on the market. In turn, competitive advantage is gained as the result of skillful management, taking into account the factors that characterize the company environment. In the management process, methods and concepts that, when properly applied, facilitate the company's innovative activities play the key role, thus contributing to building competitive advantage. The purpose of this paper is to specify and characterize the methods and management concepts most commonly used by hospitality companies in the process of building competitive advantage. The core benefit of these considerations is that they serve to identify those activities of hospitality companies in which the analyzed methods and concepts found practical application. The final part of the article is devoted to an attempt to identify barriers and problems that significantly limit the use of these methods and concepts. Material and methods. In order to achieve this objective, a survey and interviews were carried out in all three- and four-star hotels in the Rzeszów area in the first quarter of 2012. Results. The results revealed that the concept most commonly used by hoteliers was knowledge-based organization (knowledge management, followed by outsourcing, benchmarking and internal competition, respectively. Conclusions. The study also demonstrated that the managers of these hospitality companies significantly lacked substantive knowledge of emerging “market” management methods and concepts.

Possibilities, advantages and disadvantages of application FEM in nuclear technology

International Nuclear Information System (INIS)

Jankovic, D.

1997-01-01

Possibilities of applying the finite element method in nuclear technology are shown in this paper. It has an example of application numerical procedure in fluid mechanics and description of its basic principles. (author)

Competitive advantage and corporate communications

OpenAIRE

Mitić Sanja; Ognjanov Galjina

2013-01-01

Strategic importance of corporate communications and its role in the development of competitive advantage has attracted interest of numerous researchers in the fields of organization, management, marketing and public relations. Recent studies particularly emphasise the growing importance of soft factors, such as reputation in the development of competitive advantage. Concept of reputation is strongly connected with stakeholder theory, which stresses the importance of corporate communications ...

Advantages and Limitations of BiRadstm System Application in Clinical Practice

International Nuclear Information System (INIS)

Torres Tabanera, M.; Acebal Blanco, M. M.

2004-01-01

The BiRads ' T m system (Breast-Imaging Report and Database System) was created by the American College of Radiology in 1992 with the participation of other American scientific societies. It is a quality assurance tool designed to standardize mammographic reports, reduce confusion in the interpretation of breast images and facilitate the monitoring of results. It consists of five sections: breast Imaging Lexicon, Reporting System, Follow-up and Outcome Monitoring, National Mammography Database and Appendices. It was designed in order to create a common lexicon, universally accepted by breast pathology specialists, which would standardize both content and format of mammographic reports, as well as constitute a tool for continuing quality improvement. However, these promising objectives give rise to some serious controversies when sufficient experience is gained in a daily clinical use of the system. In this study, the advantages and contributions of Bi-Rads TM system use is reviewed. Drawbacks are also cited, based on then years experience, with regard to lexicon, categories and recommendations. (Author)

Competitive advantage by customer integration. Empirical investigation by the example of German manufacturers of baggage handling systems.

OpenAIRE

Schindler, Uwe

2017-01-01

Achieving strong and unique competitive advantages is a goal in the strategic management of customer relations. Sustainable successful relationships to customers to secure profitable business in the face of growing competition are among the most important challenges for firms. In order to remain competitive in the future, German manufacturers have to force the application of innovative state- of-the-art methods to develop competitive advantages to attract and bind customers and to differentia...

Perceived versus Actual Competitive Advantage

OpenAIRE

Langemeier, Michael R.; Yeager, Elizabeth

2014-01-01

This paper examined the relationship between farm characteristics and perceived sources of competitive advantage, and cost-based and revenue-based efficiency indices. Gross farm income and the percentage of labor devoted to crop production were significant and positively correlated with cost and revenue efficiency while the perception of the cowherd being the most important part of the operation was negatively correlated with efficiency. In general, perceived sources of competitive advantage ...

Corporate Finance and Comparative Advantage

OpenAIRE

Peter Egger; Christian Keuschnigg

2009-01-01

Since innovative firms are often financially constrained, access to external funds is important for the expansion of innovative industries. This paper reports four important results. First, comparative advantage is shaped by factor endowments as well as fundamental determinants of corporate finance. In particular, a larger equity ratio of firms and tough governance standards relax finance constraints and create a comparative advantage in innovative industries. Second, factor price equalizatio...

Advantages and applications of moving bed technology in urban and industrial waste waters; Ventajas y aplicaciones de la tecnologia de lecho movil en aguas residuales urbanas e industriales

Energy Technology Data Exchange (ETDEWEB)

Larrea Urcola, A.; Zalakain Bengoa, G.; Larrea Ucola, L.; Abad Alba, A.

2004-07-01

Moving bed technology is a new biological treatment by activated sludge where the biomass grows attached to a inert media (plastic) that moves free along the reactor. The main advantages of this technology are the reduction of the reactor volume, simplicity of operation and the easiest way for the upgrading of plants. Results of different industrial applications are shown together with the latest researches lines that combine organic matter and nitrogen removal. (Author) 12 refs.

Clinical advantages of 3.0 T MRI over 1.5 T

International Nuclear Information System (INIS)

Willinek, Winfried A.; Schild, Hans H.

2008-01-01

Since approval by the FDA in 2000, human MR imaging (MRI) at 3.0 T has been increasingly used in clinical practice. In spite of the potential technical challenges, a number of clinical advantages of 3.0 T MRI over 1.5 T have been identified in the recent years. This article reviews the benefits and the current knowledge of 3.0 T whole-body MRI from an evidence-based perspective and summarizes its clinical applications

Clinical advantages of 3.0 T MRI over 1.5 T

Energy Technology Data Exchange (ETDEWEB)

Willinek, Winfried A. [Department of Radiology, University of Bonn, Sigmund-Freud-Strasse 25, D-53105 Bonn (Germany)], E-mail: winfried.willinek@ukb.uni-bonn.de; Schild, Hans H. [Department of Radiology, University of Bonn, Sigmund-Freud-Strasse 25, D-53105 Bonn (Germany)

2008-01-15

Since approval by the FDA in 2000, human MR imaging (MRI) at 3.0 T has been increasingly used in clinical practice. In spite of the potential technical challenges, a number of clinical advantages of 3.0 T MRI over 1.5 T have been identified in the recent years. This article reviews the benefits and the current knowledge of 3.0 T whole-body MRI from an evidence-based perspective and summarizes its clinical applications.

Exploring the advantages of using social network sites (SNSs) in dental medicine organisations.

Science.gov (United States)

Franco, Mário; Pais, Leonor

2017-05-08

Purpose The purpose of this paper is to deepen and contribute to knowledge of the use of social network sites (SNSs) in organisations, and more precisely, identify the advantages. Design/methodology/approach To reach this objective, a cross-section study was adopted based on application of a questionnaire, the final sample consisting of 78 dental medicine organisations in Portugal. Findings The results obtained lead to the conclusion that a great number of the organisations studied are connected to SNSs, particularly Facebook. The advantages associated with marketing tools and breaking down barriers between the organisation and the world are those highlighted most in this study. Practical implications According to the empirical evidence obtained, organisations are found to use these sites for other purposes, such as communicating with clients/patients and receiving feedback on the service provided to increase satisfaction and improve the quality of services. Originality/value The study contributes to advancing theory in the field of internet research strategic. More precisely, this study is associated with the creation of a theoretical framework that shows the advantages of using SNSs in an innovative context: dental medicine organisations. A categorisation of these advantages and some implications for theory and practice are also some contributions of this study.

Compositional Advantage and Strategy

DEFF Research Database (Denmark)

Li, Xin

In this paper, I first critique the composition-based view of Yadong Luo and John Child for understanding how resource-poor firms survive and thrive. To remedy the deficiencies in their perspective, I then propose a dynamic theory of compositional advantage and strategy. Here, the compositional...... advantage is redefined as the attractiveness of the composition of the producer’s offering in terms of scope and perceived value/price ratio. I identify five ways or basic compositional strategies to improve the value/price ratio. A firm may have an overall compositional strategy that is composed of some...... of the present theory to understanding Chinese firms. I conclude with managerial implications and suggestions for future research....

Innovation strategies and competitive advantage

OpenAIRE

Gërguri, Shqipe; Rexhepi, Gadaf; Ramadani, Veland

2013-01-01

Companies today operate in a very dynamic, uncertain and competitive environment. They compete in "nicety" that are so small but so important. Companies are trying to achieve competitive advantage in order to help them obtain a better and a stable position in the marketplace. The best way for companies to achieve a competitive advantage is through innovation. This paper addresses the meaning of innovation what does innovation present, types of innovation specifically discussing the right way ...

STRATEGIES FOR ACHIEVING COMPETITIVE ADVANTAGE

OpenAIRE

Jusuf ZEKIRI; Alexandru NEDELEA

2011-01-01

This paper is organized in three parts. A brief overview of the importance of strategies within companies, as well as literature review is presented along with traditional approaches on strategies for achieving competitive advantage, and new approaches for gaining a competitive advantage. The main objective of the paper is to outline and discuss the relevant issues and challenges from a theoretical viewpoint related with the possible strategy formulation of companies in order to achieve a com...

Advantage of Sesame and Cowpea Intercrops in Different Fertilizer Application Systems

Directory of Open Access Journals (Sweden)

Jasem Aminifar

2017-04-01

Full Text Available To investigate the effects of different fertilizer applications and sesame/cowpea intercropping systems on soil fertility, a split plot experiment based on randomized complete block design was conducted in Fasa, Fars province, during 2014. The main plots were five fertilizer levels consisted of: using chemical fertilizers nitrogen+phosphorous (F1, organic fertilizers (F2, biofertilizers (F3, 50% chemical fertilizer + 50% organic fertilizer (F4 and 50% chemical fertilizer + 50% biofertilizer (F5, and sub plots consisted of: sole cropping of sesame (M1, sole cropping of cowpea (M2, 50:50 sesame-cowpea intercropping (M3, 75:25 sesame-cowpea intercropping (M4 and 25:75 sesame-cowpea intercropping (M5. The results showed that soil fertility and cropping systems affected the yield and yield components of sesame and cowpea significantly. The highest yield of sesame (1292.6 kg.ha-1, and cowpea (3772.4 kg.ha-1 were obtained from their sole croppings. Among the applications of fertilizer, the highest yield of sesame (950.49 kg.ha-1 and cowpea (2582.50 kg.ha-1 belonged to bioorganic and biofertilizer treatments, respectively. In spite of these results, the highest land equivalent ratio (LER belonged to F4 (1.24 and M3 (1.03 treatments. In general, according to the results, it seems that 50:50 sesame-cowpea intercropping (M3 and application of 30 kg.ha-1 N + 50 kg.ha-1 P + 150 kg.ha-1 bio-organic fertilizer (F4, may reduce application of chemical fertilizers and be beneficial to sesame-cowpea intercropping system.

Transumbilical single-site laparoscopy takes the advantage of ultraminilaparotomy in managing an extremely large ovarian cyst

Directory of Open Access Journals (Sweden)

Hsuan Su

2012-11-01

Conclusion: This application not only provides both advantages of ultraminilaparotomy and laparoscopy but it also overcomes the limitations of both approaches. Therefore, it is the surgical approach of choice for a patient bearing an extremely large ovarian cystic tumor.

Using IT-CMF to build Competitive Advantage

OpenAIRE

McLaughlin, Stephen

2012-01-01

Developing a competitive advantage, for any organization, is a key business imperative. Without some form of competitive advantage it is very difficult to compete within today’s highly dynamic market place. In order to develop competitive advantages organizations must focus on identifying and building their core capabilities. As technology’s influence is now pervasive throughout every aspect of organizational life organizations must consider the role their IT based ...

Drivers of Collaborative Advantage

DEFF Research Database (Denmark)

Weihe, Gudrid

processes and behavioural dimensions is practically non-existent. This article tries to remedy the current gap in the literature by reviewing research findings on interfirm collaboration (alliances). On that basis a conceptual framework for analyzing partnership processes is developed. Finally......, the antecedents of collaborative advantage are theoretically examined, and the organizational competences contributing to collaborative success are identified. The conclusion is that operational processes and social dynamics are vital drivers of collaborative advantage. Another significant conclusion...... is that public management research can benefit from drawing upon existing alliance research. Alliance scholars have during the past couple of decades accumulated an impressive amount of knowledge on different aspects of inter-firm cooperation, and therefore the learning potential for public management scholars...

46 CFR 160.066-12 - Operational tests.

Science.gov (United States)

2010-10-01

... provided by a sealed plastic bag or other waterproof packaging, submersion under 25 mm (1 in.) of water for... operating instructions. The following data as observed must be recorded for each signal: (1) Burning time of the pyrotechnic candle; (2) Color; (3) Whether the pyrotechnic candle burns out above, at, or below...

Advantages and disadvantages of nuclear magnetic resonance spectroscopy as a hyphenated technique

International Nuclear Information System (INIS)

Silva Elipe, Maria Victoria

2003-01-01

A general overview of the advancements and applications of nuclear magnetic resonance (NMR) hyphenated with other analytical techniques is given from a practical point of view. Details on the advantages and disadvantages of the hyphenation of NMR with liquid chromatography as LC-NMR and also with mass spectrometry as LC-MS-NMR are demonstrated with two examples. Current developments of NMR with other analytical separation techniques, especially with capillary liquid chromatography (capLC) are discussed

Advantages and pitfalls of South Africa-Angola strategic alliances

Directory of Open Access Journals (Sweden)

A. J. Vogel

2010-12-01

Full Text Available Purpose: Owing to a shortage of South African research focusing on international strategic alliances, this study aimed to determine whether the advantages and pitfalls of international strategic alliances referred to in international business publications are also applicable to South African international strategic alliances. Design/Methodology/Approach: This was a formal, empirical study that targeted the 163 South African enterprises which were members of the South African-Angolan Chamber of Commerce in 2005 and 2006. Findings: The results identified joint ventures as the most prominent mode of entry when expanding into developing countries and, with few exceptions, the findings support the advantages and pitfalls of international strategic alliances identified in other international publications. Value of the research: A great deal of international management research over the years has been focused on the importance of strategic alliances as a mode of entry, as well as on the pitfalls experienced by alliance partners, particularly in developed countries. However, the lack of such research in Africa in general and South Africa in particular means that South African enterprises must base their entry mode selection on non-South African research findings, and although this sample size was small, the lack of other Africa-specific research makes this research significant. Implications: With South Africa being the largest source of FDI into the rest of Africa, the findings of this paper show that South African enterprises can attain the advantages associated with international strategic alliances when using this mode of entry into Africa. In terms of pitfalls, the findings highlight the need for multinational enterprises to pay specific attention to the role of governments when forming strategic alliances.

Home advantage in the Winter Olympics (1908-1998).

Science.gov (United States)

Balmer, N J; Nevill, A M; Williams, A M

2001-02-01

We obtained indices of home advantage, based on the medals won by competing nations, for each event held at the Winter Olympics from 1908 to 1998. These indices were designed to assess home advantage while controlling for nation strength, changes in the number of medals on offer and the performance of 'non-hosting' nations. Some evidence of home advantage was found in figure skating, freestyle skiing, ski jumping, alpine skiing and short track speed skating. In contrast, little or no home advantage was observed in ice hockey, Nordic combined, Nordic skiing, bobsled, luge, biathlon or speed skating. When all events were combined, a significant home advantage was observed (P = 0.029), although no significant differences in the extent of home advantage were found between events (P > 0.05). When events were grouped according to whether they were subjectively assessed by judges, significantly greater home advantage was observed in the subjectively assessed events (P = 0.037). This was a reflection of better home performances, suggesting that judges were scoring home competitors disproportionately higher than away competitors. Familiarity with local conditions was shown to have some effect, particularly in alpine skiing, although the bobsled and luge showed little or no advantage over other events. Regression analysis showed that the number of time zones and direction of travel produced no discernible trends or differences in performance.

Advantages of utilizing DMD based rapid manufacturing systems in mass customization applications

Science.gov (United States)

El-Siblani, A.

2010-02-01

The Use of DMD based Rapid Manufacturing Systems has proven to be very advantageous in the production of highly accurate plastic based components for use in mass customization market such as hearing aids, and dental markets. The voxelization process currently afforded with the DLP technology eliminates any layering effect associated with all existing additive Rapid Manufacturing technologies. The smooth accurate surfaces produced in an additive process utilizing DLP technology, through the voxelization approach, allow for the production of custom finished products. The implementation of DLP technology in rapid prototyping and rapid manufacturing systems allow for the usage of highly viscous photopolymer based liquid and paste composites for rapid manufacturing that could not be used in any other additive process prior to implementation of DLP technology in RP and RM systems. It also allowed for the greater throughput in production without sacrificing quality and accuracy.

Constructing Regional advantage

DEFF Research Database (Denmark)

Asheim, Bjørn T.; Boschma, Ron; Cooke, Phil

2011-01-01

This paper presents a regional innovation policy model based on the idea of constructing regional advantage. This policy model brings together concepts like related variety, knowledge bases and policy platforms. Related variety attaches importance to knowledge spillovers across complementary...... economic development within and between regions in action lines appropriate to incorporate the basic principles behind related variety and differentiated knowledge bases....

Advantages and disadvantages of high power ultrasound application in the dairy industry

Directory of Open Access Journals (Sweden)

Mislav Muža

2009-12-01

Full Text Available Preservation of food with thermal sterilisation is usually the most common way nowadays. Besides the positive aim of preservation regarding microorganisms’ reduction, elevated temperature in processing simultaneously causes serious changes in nutritive and organoleptical properties of food. Loss of food quality is related to structure and texture deformations, modification of macromolecules and creation of new compounds coming from reactions that are catalised with temperature. One of the new non-thermal processes that can in large scale improve different processes in food industry is ultrasound. In the last five years, new applications of high power ultrasound (HPU include inactivation of enzymes and microorganisms, assistance in membrane processes, improvement of dairy product texture, improvement of functional properties of proteins etc. High power ultrasound application is used in emulsification and milk homogenization, but in these processes the most important thing is to monitor possible negative effect like oxidation of fats, inactivation of valuable enzymes and denaturation of proteins. Controled and optimized application of ultrasound demands application of specific ultrasound frequency and optimal treatment time. Treatments should be performed at lower temperatures to avoid negative side effects on treated materials.

Digital linear accelerator: The advantages for radiotherapy

International Nuclear Information System (INIS)

Andric, S.; Maksimovic, M.; Dekic, M.; Clark, T.

1998-01-01

Technical performances of Digital Linear Accelerator were presented to point out its advantages for clinical radiotherapy treatment. The accelerator installation is earned out at Military Medical Academy, Radiotherapy Department, by Medes and Elekta companies. The unit offers many technical advantages with possibility of introduction new conformal treatment techniques as stereotactic radiosurgery, total body and total skin irradiation. In the paper are underlined advantages in relation to running conventional accelerator units at Yugoslav radiotherapy departments, both from technical and medical point of view. (author)

Europa Lander Material Selection Considerations

Energy Technology Data Exchange (ETDEWEB)

Tappan, Alexander S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Heller, Mellisa [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-01-10

Energetic materials (EMs, explosives, pyrotechnics, propellants) provide high-power output of high temperature reaction products. These products can be solid, liquid, or gaseous during reaction or after the products have equilibrated with the surroundings. For example, high explosives typically consist of carbon, hydrogen, nitrogen, and oxygen bonded within a single molecule, and produce almost exclusively gaseous products. Conversely, intermetallics consist of physical mixtures of metals and metalloids, and produce almost exclusively condensed products. Other materials such as pyrotechnics and propellants have intermediate behavior. All energetic materials react in a self-propagating manner that after ignition, does not necessarily require energy input from the surroundings. The range of reaction velocities can range from mm/s for intermetallics, to km/s for high explosives. Energetic material selection depends on numerous requirements specific to the needs of a system. High explosives are used for applications where high pressure gases are necessary for pushing or fracturing materials (e.g., rock, metal) or creating shock waves or air blast. Propellants are used to produce moderate-pressure, high-temperature products without a shock wave. Pyrotechnics are used to produce numerous effects including: high-temperature products, gases, light, smoke, sound, and others. Thermites are used to produce heat, high-temperature products, materials, and other effects that require condensed products. Intermetallics are used to produce high-temperature condensed products and materials, with very little gas production. Numerous categories of energetic materials exist with overlapping definitions, effects, and properties.

Exploring the sequential lineup advantage using WITNESS.

Science.gov (United States)

Goodsell, Charles A; Gronlund, Scott D; Carlson, Curt A

2010-12-01

Advocates claim that the sequential lineup is an improvement over simultaneous lineup procedures, but no formal (quantitatively specified) explanation exists for why it is better. The computational model WITNESS (Clark, Appl Cogn Psychol 17:629-654, 2003) was used to develop theoretical explanations for the sequential lineup advantage. In its current form, WITNESS produced a sequential advantage only by pairing conservative sequential choosing with liberal simultaneous choosing. However, this combination failed to approximate four extant experiments that exhibited large sequential advantages. Two of these experiments became the focus of our efforts because the data were uncontaminated by likely suspect position effects. Decision-based and memory-based modifications to WITNESS approximated the data and produced a sequential advantage. The next step is to evaluate the proposed explanations and modify public policy recommendations accordingly.

Features of formation of competitive advantages: a strategic dimension

OpenAIRE

O.Р. Pashchenko

2015-01-01

The article examines the features of formation of competitive advantages, the depth of theoretical and methodological basis for the formation of competitive advantages at an enterprise. The author has reviewed the approaches to the formation of stable and long-term competitive advantages. The author has also overviewed the requirements which are to be met by competitive advantages of a company and the factors that affect the possibility of competitive advantages. The author develops her ow...

Interests and Advantages of the Private Sector in the State-Private Partnership

OpenAIRE

Brailovskiy Ilya A.

2013-01-01

The article is devoted to analysis of interests that stimulate a private partner to joint activity with the state and advantages they obtain from realisation of projects of the state-private partnership (SPP). It marks out main features and fields of application of the state-private partnership. It underlines that an important prerequisite for motivation of the private sector to enter into partnership relations with the state is observance of clear law competent formal rules in the institutio...

The Temporal Limits of Technological Advantage

Science.gov (United States)

2017-06-01

technologically advanced capabilities. “ Technology , in fact, is one of the keys to understanding relations between Hitler’s regime and the German business ...strategy sought to “leverage US advantages in technologies 2 like big data, stealth, advanced manufacturing (e.g. 3-D printing), robotics, and... history has had different parameters and different results, examining historical situations in which a technological advantage has been achieved

COMPETITIVE ADVANTAGE IN THE ENTERPRISE PERFORMANCE

OpenAIRE

PRUNEA Ana Daniela

2014-01-01

Rapid changes in market characteristics and the technological innovations are common and faster challenges, resulting in products, processes and technologies. The competitive advantage is volatile, difficult to obtain and more difficult to maintain and strengthened with consumers who through their individual choices polarization confirms the recognition performance and award competitive advantages, thus causing the competitive ranking of companies present in a particular market. The competiti...

MOLDOVA: MISSED ADVANTAGES OF EURASIAN INTEGRATION

Directory of Open Access Journals (Sweden)

Ludmila Vasiljevna Fokina

2015-01-01

Full Text Available The article is devoted to potentially missed advantages of Eurasian integration (EAEU for Moldova. Special attention is given to the branches in which the country could get evident advantages including agriculture, power engineering, external trade ties with the EAEU countries. Possible positive effects of Eurasian integration in solution of the Transnistrian problem, in the sphere of labour migration and other fields are also shown.

Logistics potentials in business competitive advantage creation

Directory of Open Access Journals (Sweden)

Rafał Matwiejczuk

2013-12-01

Full Text Available Background: Companies constantly search for ways to achieve and sustain long-term competitive advantage. Among the factors influencing the competitive advantage creation there are so called logistics potentials, which constitute a component part of a business strategic potentials. Logistics resources, logistics capabilities and logistics competences are the main components of the logistics potentials structure and hierarchy. Methods: In order to recognize the logistics potentials which determine the competitive advantage creation one may use the assumptions and elements of contemporary management concepts, including strategic management. In particular the article deals with Resource-Based View (RBV, Dynamic Capabilities Concept (DCC and - first of all - Competence-Based Management (CBM. Results and conclusions: Several significant research projects have presented a wide scope and a large number of possibilities of logistics potentials (and logistics competences in particular influence on business competitive advantage creation. The article briefly presents the research results conducted by: (1 Michigan State University (USA, (2 European Logistics Association (ELA in cooperation with A.T. Kearney, (3 Computer Sciences Corporation and (4 Capgemini. The research results have pointed out to differentiated but at the same distinctive symptoms of logistics competences influence on competitive advantage creation. The article also refers to the results of the research carried out by the Chair of Logistics & Marketing at Opole University (Poland in companies operating in Poland. The research has been mainly dealing with the significance of logistics competences in competitive advantage creation.

Competitive advantage, what does it really mean?

NARCIS (Netherlands)

dr. Haijing de Haan; Hongjue Yan

2013-01-01

Competitive advantage is probably the most popular business concept today (Mooney, 2007). This article aims to investigate critically the discourse on competitive advantage, as expressed by business literature, by locating its meanings in the public higher education sector. This research reveals

Strategic Positioning for Sustainable Competitive Advantage: An ...

African Journals Online (AJOL)

Organizational learning is increasingly being considered as one of the fundamental sources of competitive advantage within the context of strategic management. However, most literature has not clearly linked organizational learning with sustainable competitive advantage. This paper, therefore, explores and discusses the ...

Analysis of yield advantage in mixed cropping

NARCIS (Netherlands)

Ranganathan, R.

1993-01-01

It has long been recognized that mixed cropping can give yield advantages over sole cropping, but methods that can identify such yield benefits are still being developed. This thesis presents a method that combines physiological and economic principles in the evaluation of yield advantage.

Advantages and risks in service standardization

Directory of Open Access Journals (Sweden)

Veres Zoltán

2004-01-01

Full Text Available Comparing the advantages and risks in standardizing services, there can be no clear-cut answer concerning the strategy to be followed. Exploiting advantages in the long run is only worth it for a provider of a service that is able to build up a powerful brand image. However, the more successful a service concept, the stronger the temptation to imitation. The success of imitators will sooner or later bring about multibrand loyalty.

THE EFFECT OF COMPETITIVE ADVANTAGE AND HUMAN ADVANTAGE ON INDUSTRIAL COMPETITIVE STRATEGY (Case Study: SMIs in Gorontalo Province

Directory of Open Access Journals (Sweden)

Trifandi Lasalewo

2016-09-01

Full Text Available Small and Medium Industries (SMIs have a strategic role in the Indonesian economy, as they earn 61.9 percent of the foreign exchange which goes to make up the nation’s Gross Domestic Product, and nationally they are able to absorb 97 percent of the workforce. The Global Competitiveness Report also notes that SMIs serve as the business units that affect every nation’s competitiveness. Considering this strategic role, the selection of a competitive strategy for these SMIs is absolutely necessary. Through an in-depth literature review, this study aims to explore what variables influence the competitive strategy of industries, particularly the SMIs. By using a Systematic Literature Review (SLR with a total of 31 main literature (articles, papers and books, this study has found two dominant factors that influence industrial competitive strategy: Competitive advantage and human advantage, which are subsequently developed into six independent variables (construct variables, i.e. cost, delivery, product quality, product variety, know-how and innovativeness, with a total of 44 indicators. The results of measurements of the sample of SMIs in Gorontalo Province, using Structural Equation Modeling, found that both competitive advantage and human advantage jointly influence 40.2 percent of the industrial competitive strategies. These results indicate that competitive strategies, such as creating products with unique features, on-time delivery, flexibility in production, and employee involvement in the innovations, are indispensable to SMIs in order for them to produce quality products and be able to maintain their advantage.

Is bilingualism losing its advantage? A bibliometric approach.

Science.gov (United States)

Sanchez-Azanza, Victor A; López-Penadés, Raúl; Buil-Legaz, Lucía; Aguilar-Mediavilla, Eva; Adrover-Roig, Daniel

2017-01-01

This study uses several bibliometric indices to explore the temporal course of publication trends regarding the bilingual advantage in executive control over a ten-year window. These indices include the number of published papers, numbers of citations, and the journal impact factor. According to the information available in their abstracts, studies were classified into one of four categories: supporting, ambiguous towards, not mentioning, or challenging the bilingual advantage. Results show that the number of papers challenging the bilingual advantage increased notably in 2014 and 2015. Both the average impact factor and the accumulated citations as of June 2016 were equivalent between categories. However, of the studies published in 2014, those that challenge the bilingual advantage accumulated more citations in June 2016 than those supporting it. Our findings offer evidence-based bibliometric information about the current state of the literature and suggest a change in publication trends regarding the literature on the bilingual advantage.

Features of formation of competitive advantages: a strategic dimension

Directory of Open Access Journals (Sweden)

O.Р. Pashchenko

2015-09-01

Full Text Available The article examines the features of formation of competitive advantages, the depth of theoretical and methodological basis for the formation of competitive advantages at an enterprise. The author has reviewed the approaches to the formation of stable and long-term competitive advantages. The author has also overviewed the requirements which are to be met by competitive advantages of a company and the factors that affect the possibility of competitive advantages. The author develops her own approach to the definition of «competitive enterprise strategy», suggests to understand the concept as the perspective of company development, the way of achieving the goals a company sets for itself guided by its policy, using internal and external competitive advantages. The author implements the model of strategic management of enterprise development based on competitive advantage creating. The suggested model will take into account the maximum possible factors that impact on the development and implementation of strategies. Due to the model risks will also be reduced. The paper determines that the important stage of enterprise development strategic management based on competitive advantage creating is the management of changes and the management of resistance to changes caused by the influence of factors of external and internal environment.

The greenhouse advantage of natural gas appliances

International Nuclear Information System (INIS)

Coombe, N.

2000-01-01

The life cycle report prepared recently by Energetics for the AGA, Assessment of Greenhouse Gas Emissions from Natural Gas, demonstrates clearly the greenhouse advantage natural gas has over coal in generating electricity. This study also goes one step further in applying this life cycle approach to the use of space and water heating within the home. The study shows the significant green-house advantage that natural gas appliances have over electric appliances. Findings from other studies also support this claim. The natural gas suppliers are encouraged to take advantage of the marketing opportunity that these studies provide, offering the householders the fuel that will significantly reduce their contribution to greenhouse emission

What is the difference in the hybrid imaging techniques - SPECT/CT and PET-CT and is there any advantage of their application?

International Nuclear Information System (INIS)

Kostadinova, I.

2012-01-01

The hybrid imaging methods - Single Photon Emission Tomography-Computer Tomography /SPECT-CT / and Positron Emission Tomography-Computer Tomography / PET-CT/ allow receiving of combined image of two different techniques. In such a way it is possible to superimpose detailed anatomical image of the multislice spiral computer tomography with specific and sensitive molecular images of the SPECT and PET in a single study, allowing utilization of the full possibilities of the both techniques. They have advantages and disadvantages, which basically stem from the differences in the used radiopharmaceuticals and their physical properties. In PET- CT - positron emitters are applied, most often 18F and 11C, while in SPECT-CT - single photon emitters, most often 99m Tc and 131 I. A disadvantage of PET is a high cost, which is produced in cyclotron and its logistics is complicated. The great advantage of PET is its better spatial resolution, compared to SPECT, because of the possibility for simultaneous detection of pared photons and better registration. These techniques, especially PET-CT are nowadays the most increasing imaging methods in the world in making diagnosis, staging and following the effect of treatment in patients with oncological, neurological, cardiological, orthopedic diseases and infections. Recently, they are applied for the purposes of radiotherapy planning on the basis of the metabolically active tumor. As a final result, compared to the conventional techniques - roentgenography, CT and MRI, it is possible in many cases to make an early and more precise diagnosis, saving patients' time and using most appropriate treatment. As a conclusion it is clear, that the hybrid imaging has future and its application will increase. (author)

Home advantage in the Winter Paralympic Games 1976-2014.

Science.gov (United States)

Wilson, Darryl; Ramchandani, Girish

2017-01-01

There is a limited amount of home advantage research concerned with winter sports. There is also a distinct lack of studies that investigate home advantage in the context of para sport events. This paper addresses this gap in the knowledge by examining home advantage in the Winter Paralympic Games. Using a standardised measure of success, we compared the performances of host nations at home with their own performances away from home between 1976 and 2014. Both country level and individual sport level analysis is conducted for this time period. Comparisons are also drawn with the Winter Olympic Games since 1992, the point from which both the Winter Olympic Games and the Winter Paralympic Games have been hosted by the same nations and in the same years. Clear evidence of a home advantage effect in the Winter Paralympic Games was found at country level. When examining individual sports, only alpine skiing and cross country skiing returned a significant home advantage effect. When comparing home advantage in the Winter Paralympic Games with the Winter Olympic Games for the last seven host nations (1992-2014), we found that home advantage was generally more pronounced (although not a statistically significant difference) in the case of the former. The causes of home advantage in the Winter Paralympic Games are unclear and should be investigated further.

Competitive Advantage in Tourism of Southeast Asian Countries

OpenAIRE

Akarapong Untong

2013-01-01

The competitive advantage in tourism of the countries in Southeast Asia was assessed by using coverage ratio and revealed comparative advantage (RCA). Static and dynamic analyses were applied to the data of tourism services export during 2002-2010. The results show that Cambodia, Laos PDR, Malaysia, Thailand, and Vietnam had competitive advantages, i.e. these countries gain the surpluses more than that of the region’s. Thailand had the highest specialization in Southeast Asia but declining. M...

Advantages of magnification radiography

International Nuclear Information System (INIS)

Doi, K.

1976-01-01

Geometric arrangements and exposure conditions used in different magnification techniques are described and the following advantages of radiographic magnification technique are discussed: sharpness effect; noise effect; air gap effect; and visual effect. The magnification technique can be used in various diagnostic procedures as a means of improving the image quality of radiographs

Analisis Dampak Servant Leadership Terhadap Competitive Advantage

OpenAIRE

Oktavia, Pek Nike

2014-01-01

Penelitian ini bertujuan untuk mengetahui apakah terdapat dampak antara Servant Leadership terhadap Competitve Advantage, Employee Empowerment dan Organizational Learning. Variabel Servant Leadership diukur dari lima indikator, yaitu altruistic calling, emotional healing, wisdom, persuasive mapping, dan organizational stewardship. Variabel Competitive Advantage diukur dari lima indikator, yaitu price/cost, quality, delivery dependability, time to market, dan product innovation. Variabel Emplo...

The Selective Advantage of Synonymous Codon Usage Bias in Salmonella.

Directory of Open Access Journals (Sweden)

Gerrit Brandis

2016-03-01

Full Text Available The genetic code in mRNA is redundant, with 61 sense codons translated into 20 different amino acids. Individual amino acids are encoded by up to six different codons but within codon families some are used more frequently than others. This phenomenon is referred to as synonymous codon usage bias. The genomes of free-living unicellular organisms such as bacteria have an extreme codon usage bias and the degree of bias differs between genes within the same genome. The strong positive correlation between codon usage bias and gene expression levels in many microorganisms is attributed to selection for translational efficiency. However, this putative selective advantage has never been measured in bacteria and theoretical estimates vary widely. By systematically exchanging optimal codons for synonymous codons in the tuf genes we quantified the selective advantage of biased codon usage in highly expressed genes to be in the range 0.2-4.2 x 10-4 per codon per generation. These data quantify for the first time the potential for selection on synonymous codon choice to drive genome-wide sequence evolution in bacteria, and in particular to optimize the sequences of highly expressed genes. This quantification may have predictive applications in the design of synthetic genes and for heterologous gene expression in biotechnology.

Novel techniques in stress echocardiography: a focus on the advantages and disadvantages.

Science.gov (United States)

Vamvakidou, Anastasia; Gurunathan, Sothinathan; Senior, Roxy

2016-01-01

Stress echocardiography (SE) is an established tool not only for the assessment of coronary artery disease (CAD), but also for the evaluation of valvular disease and cardiomyopathy. New techniques, namely contrast echocardiography for function and perfusion including assessment of coronary flow reserve, strain imaging, 3-dimensional echocardiography, Doppler-derived coronary flow reserve and multimodality echocardiography, have been incorporated into stress protocols for improving assessment of cardiac disease. In this review, the advantages and disadvantages of these novel SE techniques are examined in terms of feasibility, accuracy, reproducibility and applications.

Advantages and disadvantages of application of inductively coupled plasma mass spectrometry for analysis of trace elements

International Nuclear Information System (INIS)

Kovacs, Bela; Borbely, Maria

2011-01-01

In this paper the advantages and disadvantages are detailed, moreover special interference effects of the examined elements are evaluated. The detection limits of different ICP-MS instruments are compared. As a result of our research work various solutions are proposed for multielement analysis (e.g. Se, I, Co, As, Te, Cd, Pb and Cr) of the above various samples to reach more accurate and more precise results using ICP-MS instrument

Generating Relational Competitive Advantage from Strategic Technological Partnership

DEFF Research Database (Denmark)

Hu, Yimei; Zhang, Si; Li, Jizhen

2012-01-01

Collaborating with external partners on strategic technological partnerships (STPs) have been popular phenomena for long, which leads new development in existing theories on competitive advantage. Under the relational view, the competitive advantage is jointly generated by alliance firms. Though...... the relational view of competitive advantage has been proposed for more than a decade, few in-depth empirical researches are down within this field, especially case study on R&D strategic alliance from this perspective. Based on these considerations, we investigate an STP between a Danish transnational...... corporation and a Chinese private firm aiming to understand how to generate relational competitive from an STP? Based on the explorative case study, we find that there are three key processes related to relational competitive advantage: partner selection, relational rents generation and relational rents...

Competitive Intelligence in Perspective to be a Source of Competitive Advantage and Strategic Contributions

Directory of Open Access Journals (Sweden)

Felipe Gama Buzzerio

2014-12-01

Full Text Available This article examines the prospect of Competitive Intelligence (CI constitute a source of competitive advantage in light of the Resource Based View and its contribution to the strategic management of the company. Relies on exploratory and descriptive research using the qualitative method. Six managers responsible for CI activities institutionalized in large different business companies were interviewed. Data were processed and analyzed with the application of content analysis. It was concluded that the CI is unable to be a source of competitive advantage but rather as an effective support to decision making process in the surveyed companies. Apparently CI products meet the specific needs of internal customers, facilitate the integration of CI with marketing and operations, help in the identification of risks through the analysis of strategic information, which is a differentiator compared to other types of intelligences.

Implement the medical group revenue function. Create competitive advantage.

Science.gov (United States)

Colucci, C

1998-01-01

This article shows medical groups how they can employ new financial management and information technology techniques to safeguard their revenue and income streams. These managerial techniques stem from the application of the medical group revenue function, which is defined herein. This article also describes how the medical group revenue function can be used to create value by employing a database and a decision support system. Finally, the article describes how the decision support system can be used to create competitive advantage. Through the wise use of internally generated information, medical groups can negotiate better contract terms, improve their operations, cut their costs, embark on capital investment programs and improve market share. As medical groups gain market power by improving in these areas, they will be more attractive to potential strategic allies, payers and investment bankers.

The Relational View of Interorganizational Competitive Advantage

DEFF Research Database (Denmark)

Hu, Yimei; Zhang, Si; Li, Jizhen

Collaborating with external partners on R&D and forming strategic partnership for R&D have been popular phenomena for long, which leads new development in existing theories. Though the relational view of competitive advantage has been proposed for more than a decade, few in-depth empirical...... they generate relational rents (interorganizational competitive advantage) from this alliance? Based on this case study, we will propose some implications for the R&D collaboration between Chinese and Scandinavian countries. Also, the case will help us to test and enrich the existing theories...... on interorganizational competitive advantage. At the end of the paper, based on existing theories and the case study result, we will propose our conceptual framework on researching R&D strategic alliance between Scandinavian and Chinese firms....

Achieving competitive advantage through the integration of disabled architects in architectural design firms in Egypt

Directory of Open Access Journals (Sweden)

Ezzat Othman Ayman Ahmed

2017-01-01

Full Text Available The 2030 strategy of sustainable development in Egypt is based on integrated goals, including Human Resource Development. Egypt has ~9,540 disabled architects, who can play an important role in achieving competitive advantage through their integration in Architectural Design Firms (ADFs. By neglecting the benefits of integrating disabled architects, ADFs encounter the risk of losing unique skills and competent personnel. This article investigates the integration of disabled architects in ADFs as an approach for achieving competitive advantage. To achieve this aim, a research methodology consisting of literature review, case studies, and survey questionnaire has been adopted, and it is designed to achieve five objectives. First, literature review is used to investigate the concepts of disabilities and competitive advantage, as well as the relation between integrating disabled architects and the achievement of competitiveness in ADFs. Second, six case studies are presented and analyzed to investigate the role and process of achieving competitive advantage in ADFs through employing disabled architects. Third, the results of a survey questionnaire are analyzed to examine the perception regarding and application of employing disabled architects as an approach for achieving competitive advantage in ADFs in Egypt. Fourth, a framework is developed to facilitate the integration of disabled architects in ADFs with the goal of achieving competitive advantage. Finally, the research findings are summarized and recommendations are put forth. The value of this research stems from the need to address the issue of lack of employment of disabled architects in ADFs and the benefits of making better use of their unique capabilities and skills toward achieving competitiveness. In addition, this research covers a controversial topic that receives scant attention in construction literature, especially in Egypt.

THE RESOURCE POTENTIAL AND THE DEVELOPMENT STRATEGY OF COMPETITIVE ADVANTAGES IN BUSINESS STRUCTURE

Directory of Open Access Journals (Sweden)

Okolnishnikova Irina Yurievna

2013-02-01

Full Text Available The aim of the research is the development of theoretical approaches to the study of the essence and structure of the resource potential of entrepreneurship in the context of the development strategy of the competitive advantages in business structure. As the research methodology the complex of principles and tools of system and axiological approaches is used. According to the results of the conducted research, possessing the scientific novelty, the conceptual apparatus is clarified and the author's definition of the resource potential of the enterprise is given, a model of the resource potential structure in commercial organization is analyzed and the mechanism of strategy formation for sustainable competitive advantages provision of the organization on the basis of the effective use of its resource potential is identified. Area of application of the research results is the control of competitiveness in general and resource potential of entrepreneurial structures, in particular at all levels of the socio-economic system of society.

Project safety as a sustainable competitive advantage.

Science.gov (United States)

Rechenthin, David

2004-01-01

To be consistently profitable, a construction company must complete projects in scope, on schedule, and on budget. At the same time, the nature of the often high-risk work performed by construction companies can result in high accident rates. Clients and other stakeholders are placing increasing pressure on companies to decrease those accident rates. Clients routinely demand copies of safety plans and evidence of past results at the "pre-qualification" or "request for proposal" stages of the procurement process. Are high accident rates and the associated costs just a part of business? Companies that deliver on scope, schedule, and budget have a competitive advantage. Is it possible for projects with low accident rates to use it as a competitive advantage? Is the value added by safety just a temporary or parity issue, or does a successful safety program offer significant advantage to the company and the client? This article concludes that in the case of a high-risk industry, such as the construction industry, an organization with a successful safety program can promote safety performance as a sustainable competitive advantage. It is a choice the company can make.

Abnormal uterine bleeding: advantages of formal classification to patients, clinicians and researchers.

Science.gov (United States)

Madhra, Mayank; Fraser, Ian S; Munro, Malcolm G; Critchley, Hilary O D

2014-07-01

To highlight the advantages of formal classification of causes of abnormal uterine bleeding from a clinical and scientific perspective. Review and recommendations for local implementation. In the past, research in the field of menstrual disorders has not been funded adequately with respect to the impact of symptoms on individuals, healthcare systems and society. This was confounded by a diverse terminology, which lead to confusion between clinical and scientific groups, ultimately harming the underlying evidence base. To address this, a formal classification system (PALM-COEIN) for the causes of abnormal uterine bleeding has been published for worldwide use by FIGO (International Federation of Gynecology and Obstetrics). This commentary explains problems created by the prior absence of such a system, the potential advantages stemming from its use, and practical suggestions for local implementation. The PALM-COEIN classification is applicable globally and, as momentum gathers, will ameliorate recurrence of historic problems, and harmonise reporting of clinical and scientific research to facilitate future progress in women's health. © 2014 Nordic Federation of Societies of Obstetrics and Gynecology.

Internal microdosimetry of inhaled radon progeny in bronchial airways: advantages and limitations

International Nuclear Information System (INIS)

Hofmann, Werner; Fakir, Hatim; Pihet, Pascal

2007-01-01

The objective of the present study was to identify advantages and limitations of the application of microdosimetric concepts for inhaled radon progeny activities in the lungs. The methods employed for this analysis were a recently developed Monte- Carlo microdosimetry code for the calculation of energy deposition in bronchial target cells and the Probability Per Unit Track Length (PPUTL) model, which relates these microdosimetric parameters to cellular radiation effects. The major advantages of internal microdosimetry of radon progeny in bronchial airways are: (i) quantitative characterisation of non-uniform dose distributions and identification of target sites with enhanced carcinogenic potential, (ii) quantification of low doses of alpha particles by the number of cells hit and the dose received by those cells, (iii) illustration of the random variations of cellular doses by specific energy distributions and (iv) establishment of a direct link to cellular radiobiological effects. At present, a major limitation of microdosimetry is the extrapolation of the response of individual cells to the resulting tissue response, which is still not fully explored. (authors)

ENTERPRISE IRELAND: Design for Competitive Advantage Conference

OpenAIRE

Dee, Peter

2003-01-01

A stimulating conference bringing together world leading experts on design to address the importance of brand development strategies to achieve competitive advantage. Peter Dee - Strategic Design and Marketing Consultant, specialised in the creation of brand development strategies for Enterprise Ireland’s Design Unit. Peter was responsible for the design and development of the the brand identity for the Enterprise Ireland Design for Competitive Advantage Conference in Dublin.

Advantages of a Dynamic RGGG Method in Qualitative and Quantitative Analysis

International Nuclear Information System (INIS)

Shin, Seung Ki; Seong, Poong Hyun

2009-01-01

Various researches have been conducted in order to analyze dynamic interactions among components and process variables in nuclear power plants which cannot be handled by static reliability analysis methods such as conventional fault tree and event tree techniques. A dynamic reliability graph with general gates (RGGG) method was proposed for an intuitive modeling of dynamic systems and it enables one to easily analyze huge and complex systems. In this paper, advantages of the dynamic RGGG method are assessed through two stages: system modeling and quantitative analysis. And then a software tool for dynamic RGGG method is introduced and an application to a real dynamic system is accompanied

[Understanding the advantages and disadvantages of femtosecond laser comprehensive applications in ophthalmology].

Science.gov (United States)

Xie, Li-xin; Gao, Hua

2013-04-01

The femtosecond (FS) laser is a novel laser technology, and is approved clinical application by FDA in 2000. FS laser initially mainly used in corneal refractive surgery to replace the mechanical microkeratome. Since the accuracy and controllability of the FS laser is very high, it shows superiority in the field of corneal refractive surgery. And with the development of the relative hard and software, FS laser is began to used in other fields of ophthalmology, such as corneal transplants, cataract surgery, as well as assisted diagnosis et al., although still have some limitations, the preliminary clinical results have been shown a very good prospects in the ophthalmology fields. Therefore, we reviewed the alternative applications, challenges and limitations, research direction in the future of FS laser, so that provide a reference and revelations for the peers.

Organizational Learning and Sustainable Competitive Advantages (SCA): The Nigerian Experience

OpenAIRE

Omotayo Oyeniyi

2011-01-01

The purpose of this paper is to test for core competencies of organizations in achieving sustainable competitive advantage within the service organizations in a developing economy like Nigeria. The paper specifically deals with the importance of organizational learning on sustainable competitive advantage and how it can be used to achieve sustainable advantage. Despite the wide spread importance attached to building sustainable competitive advantage, the relationship between organizational le...

Metal Nitrides for Plasmonic Applications

DEFF Research Database (Denmark)

Naik, Gururaj V.; Schroeder, Jeremy; Guler, Urcan

2012-01-01

Metal nitrides as alternatives to metals such as gold could offer many advantages when used as plasmonic material. We show that transition metal nitrides can replace metals providing equally good optical performance for many plasmonic applications.......Metal nitrides as alternatives to metals such as gold could offer many advantages when used as plasmonic material. We show that transition metal nitrides can replace metals providing equally good optical performance for many plasmonic applications....

MEASUREMENTS OF SHOCK WAVE FORCE IN SHOCK TUBE WITH INDIRECT METHODS

Directory of Open Access Journals (Sweden)

Mario Dobrilović

2005-12-01

Full Text Available Tests have been conducted at the “Laboratory for testing of civil explosives, detonators, electrical detonators and pyrotechnical materials”, Department for mining and geotechnics of the Faculty of mining, geology and petroleum engineering, University of Zagreb with the purpose of designing a detonator that would unite advantages of a non-electric system and the precision in regulation of time delay in electronic initiation system. Sum of energy released by the wave force in shock tube is a pre-condition for operation of the new detonator, and measurement of wave force is the first step in determining the sum of energy. The sum of energy is measured indirectly, based on two principles: movement sensors and strain.

Gas pipeline internal painting: an economical advantage; Uso da pintura interna em gasodutos: uma vantagem economica

Energy Technology Data Exchange (ETDEWEB)

Silva, Christian E.; Santos, Paulo T. [Soco-Ril do Brasil S.A., Pindamonhangaba, SP (Brazil)]|[Faculdade de Engenharia Quimica de Lorena (FAENQUIL), SP (Brazil). Programa de Pos-graduacao em Engenharia Mecanica; Oliveira, Luiz C. [Confab Industrial S.A., Pindamonhangaba, SP (Brazil)]|[Faculdade de Engenharia Quimica de Lorena (FAENQUIL), SP (Brazil). Programa de Pos-graduacao em Engenharia Mecanica; Campos, Paulo H. [Confab Industrial S.A., Pindamonhangaba, SP (Brazil)

2003-07-01

Focusing the fabulous financial losses due to the corrosion problems, it had been necessary increase the range of new technologies and developments regarding material protection. The application of internal painting systems have become the most employed protection technical, showing a lot of benefits: improved flow characteristics of gas, reduced energy consumption of pumping, reduced pressure drops, easily application, inspection and maintenance, faster commissioning, reduced deposition of condensate and microorganism, excellent preventing corrosion during storage and operation, and others. The present paper describe the advantages and the technical and financial benefits of liquid epoxy internal coating. (author)

Creating corporate advantage.

Science.gov (United States)

Collis, D J; Montgomery, C A

1998-01-01

What differentiates truly great corporate strategies from the merely adequate? How can executives at the corporate level create tangible advantage for their businesses that makes the whole more than the sum of the parts? This article presents a comprehensive framework for value creation in the multibusiness company. It addresses the most fundamental questions of corporate strategy: What businesses should a company be in? How should it coordinate activities across businesses? What role should the corporate office play? How should the corporation measure and control performance? Through detailed case studies of Tyco International, Sharp, the Newell Company, and Saatchi and Saatchi, the authors demonstrate that the answers to all those questions are driven largely by the nature of a company's special resources--its assets, skills, and capabilities. These range along a continuum from the highly specialized at one end to the very general at the other. A corporation's location on the continuum constrains the set of businesses it should compete in and limits its choices about the design of its organization. Applying the framework, the authors point out the common mistakes that result from misaligned corporate strategies. Companies mistakenly enter businesses based on similarities in products rather than the resources that contribute to competitive advantage in each business. Instead of tailoring organizational structures and systems to the needs of a particular strategy, they create plain-vanilla corporate offices and infrastructures. The company examples demonstrate that one size does not fit all. One can find great corporate strategies all along the continuum.

Competitive Intelligence and Social Advantage.

Science.gov (United States)

Davenport, Elisabeth; Cronin, Blaise

1994-01-01

Presents an overview of issues concerning civilian competitive intelligence (CI). Topics discussed include competitive advantage in academic and research environments; public domain information and libraries; covert and overt competitive intelligence; data diversity; use of the Internet; cooperative intelligence; and implications for library and…

Estimation of the thermal characteristics of a bridgewire environment by an electrothermal response test

International Nuclear Information System (INIS)

Donaldson, A.B.; Strasburg, A.C.

1976-01-01

The electrothermal response of an electroexplosive device is determined by applying a subcritical square wave current pulse to the bridgewire and monitoring the resultant temperature excursion. The temperature profile, thus obtained, can be utilized with a mathematical model called the ''Probe Method'' for approximating thermal properties. It is possible to estimate the thermal conductivity and specific heat of the pyrotechnic and the thermal contact conductance at the bridgewire/pyrotechnic interface by this technique

A model for the advantage of early electron cyclotron current drive in the suppression of neoclassical tearing modes

International Nuclear Information System (INIS)

Lazaros, Avrilios; Maraschek, Marc; Zohm, Hartmut

2007-01-01

An analytic model for the advantage of the early application of electron cyclotron current drive (ECCD) in the suppression of neoclassical tearing modes (NTMs) is presented. The improved performance of early ECCD is attributed to the second (smaller) saturation island width, which appears for sufficiently small (relative to the ECCD deposition width) critical island widths, in the strongly nonlinear growth rate profile. The operational range for the advantage of early ECCD is obtained, and it is shown that it is favored by broad deposition profiles. The preliminary experimental results in ASDEX Upgrade [H. Zohm et al., Nucl. Fusion 41, 197 (2001)] are consistent with the present model

Theoretical aspects of competitive advantage and competition

OpenAIRE

Hudakova, Ivana

2009-01-01

The concept of competitive advantage is well-known for many of us and a number of literary resources focused on entrepreneurship and functioning of economies deal with it, either directly or indirectly. The understanding of the term competitive advantage though sometimes varies. One can only perceive it when looking at it as a whole, a live organism that is constantly developing in a complex dynamic entrepreneurial environment, the individual parts of which do not function when separated from...

IMPACT OF FARM SIZE AND TYPE ON COMPETITIVE ADVANTAGE

OpenAIRE

Morgan, Jeffery D.; Langemeier, Michael R.

2003-01-01

This study examined sustained competitive advantage for a sample of Kansas farms. Whole-farm data for 224 farms with continuous data from 1982-2001 were used. Overall efficiency was computed for each farm and year. Sixty farms exhibited a sustained competitive advantage. Seventy-six farms exhibited a sustained competitive disadvantage. Farms with a competitive advantage were relatively larger, received more of their gross farm income from dairy and swine production, had significantly lower ex...

THE CONCEPT OF COMPETITIVE ADVANTAGES. LOGIC, SOURCES AND DURABILITY

OpenAIRE

Cegliński, Paweł

2017-01-01

Purpose: The main purpose of this article is to present theoretical assumptions of the concept of competitive advantages and main problems connected with the same. Most of all, the article outlines issues, which are presently discussed in the field of management sciences, including sources of competitive advantages, causal ambiguity and character of durability of competitive advantages in the contemporary turbulent business environment. In the author’s opinion, the issues have a great signifi...

A Kantian argument against comparatively advantageous genetic modification.

Science.gov (United States)

Jensen, David

2011-08-01

The genetic modification of children is becoming a more likely possibility given our rapid progress in medical technologies. I argue, from a broadly Kantian point of view, that at least one kind of such modification-modification by a parent for the sake of a child's comparative advantage-is not rationally justified. To argue this, I first characterize a necessary condition on reasons and rational justification: what is a reason for an agent to do an action in one set of circumstances must be a reason for any in those circumstances to do the action. I then show that comparatively advantageous genetic modification violates this principle since a child's "getting ahead" through genetic modification cannot be rationally justified unless other children also could receive the modification, thus rendering the advantage useless. Finally, I consider the major objection to this it seems to disallow all cases of a parent's helping a child get ahead, something that parents normally engage in with their children. I argue that typical practices of developing a comparative advantage in a child, as well as practices of societal competition in general, do not conflict because they involve circumstances that mitigate the universal character of reasons. Many ordinary cases of competitive advantage that we think of as unjust, in fact, can be explained by my argument.

Advantages and Disadvantages in Image Processing with Free Software in Radiology.

Science.gov (United States)

Mujika, Katrin Muradas; Méndez, Juan Antonio Juanes; de Miguel, Andrés Framiñan

2018-01-15

Currently, there are sophisticated applications that make it possible to visualize medical images and even to manipulate them. These software applications are of great interest, both from a teaching and a radiological perspective. In addition, some of these applications are known as Free Open Source Software because they are free and the source code is freely available, and therefore it can be easily obtained even on personal computers. Two examples of free open source software are Osirix Lite® and 3D Slicer®. However, this last group of free applications have limitations in its use. For the radiological field, manipulating and post-processing images is increasingly important. Consequently, sophisticated computing tools that combine software and hardware to process medical images are needed. In radiology, graphic workstations allow their users to process, review, analyse, communicate and exchange multidimensional digital images acquired with different image-capturing radiological devices. These radiological devices are basically CT (Computerised Tomography), MRI (Magnetic Resonance Imaging), PET (Positron Emission Tomography), etc. Nevertheless, the programs included in these workstations have a high cost which always depends on the software provider and is always subject to its norms and requirements. With this study, we aim to present the advantages and disadvantages of these radiological image visualization systems in the advanced management of radiological studies. We will compare the features of the VITREA2® and AW VolumeShare 5® radiology workstation with free open source software applications like OsiriX® and 3D Slicer®, with examples from specific studies.

Potential advantages of a cesium fluoride scintillator for a time-of-flight positron camera

International Nuclear Information System (INIS)

Allemand, R.; Gresset, C.; Vacher, J.

1980-01-01

In order to improve the quality of positron tomographic imaging, a time-of-flight technique combined with a classical reconstruction method has been investigated. The decay time of NaI(Tl) and bismuth germanate (BGO) scintillators is too long for this application, and efficiency of the plastic scintillators is too low. Cesium fluoride appears to be a very promising detector material. This paper presents preliminary results obtained with a time-of-flight technique using CsF scintillators. The expected advantages were realized

Twinkling artifact on color Doppler ultrasound: an advantage or a pitfall?

Science.gov (United States)

Ozan, Ebru; Atac, Gokce Kaan; Gundogdu, Sadi

2016-07-01

The twinkling artifact (TA) or color comet-tail artifact is characterized by a rapidly changing mixture of red and blue color Doppler signals. Even though many diseases and clinical conditions have been shown to produce this artifact, its source is not clearly understood yet. The TA may provide additional information to gray-scale ultrasound findings in several clinical situations. However, there may be pitfalls to keep in mind. We must first be aware of the TA to benefit from the advantages and avoid the pitfalls. In this review, we aim to give practicing radiologists an overview of the mechanisms and clinical applications of the TA by illustrating sample cases we have encountered.

Energy Advantages for Green Schools

Science.gov (United States)

Griffin, J. Tim

2012-01-01

Because of many advantages associated with central utility systems, school campuses, from large universities to elementary schools, have used district energy for decades. District energy facilities enable thermal and electric utilities to be generated with greater efficiency and higher system reliability, while requiring fewer maintenance and…

Competitive Advantage and its Sources in an Evolving Market

Science.gov (United States)

Zaridis, Apostolos D.

2009-08-01

In a continuously altered and evolving Market, as is the food manufacturing market, the main and long-lasting objective of firm that is the maximization of its wealth and consequently the continuous remaining in profit regions, appears that it is possible to be achieved via the obtainment and maintenance of diachronically long-term competitive advantage, which it will render the firm unique or leader force in a inexorable competition that is continuously extended in a globalized market. Various definitions and different regards are developed in regard to the competitive advantage and the way with which a firm it is possible, acquiring it, to star in the market in which it is activated. As result of sustainable competitive advantage in a firm comes the above the average performance. Abundance of resources and competences that are proposed as sources of competitive advantage in the resource-based view literature exists, while they are added continuously new based on empiric studies. In any case, it appears to suffer hierarchy of sources of competitive advantage, with regard to sustainability of these.

Knowledge And Knowledge Management As A Competitive Advantage

Directory of Open Access Journals (Sweden)

Diana Bratić

2009-01-01

Full Text Available In the modern business environment with high turbulence and complexity, an organization’s force to create and sustain competitive advantage lies in what it knows not what it owns. Establishment of a knowledge management in organization will ensure sustainable competitive advantage because the intellectual capital has become the primary bases of core competencies and the key to superior performance. The transition from industrial to knowledge society, effective use of knowledge is one of the deciding factors in the struggle for competitiveness because it will ensure the rationality, efficiency and flexibility in operations, and only through the realization of those graphics company can gain a competitive advantage on the market.

Explaining Asian Americans’ academic advantage over whites

Science.gov (United States)

Hsin, Amy; Xie, Yu

2014-01-01

The superior academic achievement of Asian Americans is a well-documented phenomenon that lacks a widely accepted explanation. Asian Americans’ advantage in this respect has been attributed to three groups of factors: (i) socio-demographic characteristics, (ii) cognitive ability, and (iii) academic effort as measured by characteristics such as attentiveness and work ethic. We combine data from two nationally representative cohort longitudinal surveys to compare Asian-American and white students in their educational trajectories from kindergarten through high school. We find that the Asian-American educational advantage is attributable mainly to Asian students exerting greater academic effort and not to advantages in tested cognitive abilities or socio-demographics. We test explanations for the Asian–white gap in academic effort and find that the gap can be further attributed to (i) cultural differences in beliefs regarding the connection between effort and achievement and (ii) immigration status. Finally, we highlight the potential psychological and social costs associated with Asian-American achievement success. PMID:24799702

Explaining Asian Americans' academic advantage over whites.

Science.gov (United States)

Hsin, Amy; Xie, Yu

2014-06-10

The superior academic achievement of Asian Americans is a well-documented phenomenon that lacks a widely accepted explanation. Asian Americans' advantage in this respect has been attributed to three groups of factors: (i) socio-demographic characteristics, (ii) cognitive ability, and (iii) academic effort as measured by characteristics such as attentiveness and work ethic. We combine data from two nationally representative cohort longitudinal surveys to compare Asian-American and white students in their educational trajectories from kindergarten through high school. We find that the Asian-American educational advantage is attributable mainly to Asian students exerting greater academic effort and not to advantages in tested cognitive abilities or socio-demographics. We test explanations for the Asian-white gap in academic effort and find that the gap can be further attributed to (i) cultural differences in beliefs regarding the connection between effort and achievement and (ii) immigration status. Finally, we highlight the potential psychological and social costs associated with Asian-American achievement success.

THE RESOURCE POTENTIAL AND THE DEVELOPMENT STRATEGY OF COMPETITIVE ADVANTAGES IN BUSINESS STRUCTURE

Directory of Open Access Journals (Sweden)

Ирина Юрьевна Окольнишникова

2013-04-01

Full Text Available The aim of the research is the development of theoretical approaches to the study of the essence and structure of the resource potential of entrepreneurship in the context of the development strategy of the competitive advantages in business structure.As the research methodology the complex of principles and tools of system and axiological approaches is used.According to the results of the conducted research, possessing the scientific novelty, the conceptual apparatus is clarified and the author's definition of the resource potential of the enterprise is given, a model of the resource potential structure in commercial organization is analyzed and the mechanism of strategy formation for sustainable competitive advantages provision of the organization on the basis of the effective use of its resource potential is identified.Area of application of the research results is the control of competitiveness in general and resource potential of entrepreneurial structures, in particular at all levels of the socio-economic system of society.DOI: http://dx.doi.org/10.12731/2218-7405-2013-2-39

Demonstration of Plasma Arc Environmental Technology Applications for the Demilitarization of DOD Stockpiles

Science.gov (United States)

Smith, Ed; Zaghloul, Hany; Filius, Krag; Rivers, Tim

2000-01-01

Since 1989 the U.S. Army Construction Engineering Research Laboratories (USACERL) have been active participants in the research and development toward establishing Plasma Arc Technology (PAT) as an efficient, economical, and safe hazardous waste immobilization tool. A plasma torch capable of generating high temperatures makes this technology a viable and powerful tool for the thermal destruction of various military industrial waste streams into an innocuous ceramic material no longer requiring hazardous waste landfill (Class 1) disposal. The emerging pl asma environmental thermal treatment process, has been used to safely and efficiently meet the waste disposal needs for various demilitarized components disposal needs, such as: pyrotechnic smoke assemblies, thermal batteries, proximity fuses, cartridge actuated devices (CAD's), and propellant actuated devices (PAD's). MSE Technology Applications, Inc., (MSE) has proposed and fabricated a Mobile Plasma Treatment System to be a technology demonstrator for pilot-scale mobile plasma waste processing. The system is capable of providing small-scale waste remediation services, and conducting waste stream applicability demonstrations. The Mobile Plasma Treatment System's innovative concept provides the flexibility to treat waste streams at numerous sites and sites with only a limited quantity of waste, yet too hazardous to transport to a regional fixed facility. The system was designed to be operated as skid mounted modules; consisting of a furnace module, controls module, offgas module, and ancillary systems module. All system components have been integrated to be operated from a single control station with both semi-continuous feeding and batch slag-pouring capability.

Demonstration of Plasma Arc Environmental Technology Applications for the Demilitrization of DOD Stockpiles

Science.gov (United States)

Smith, Ed; Dee, P. E.; Zaghloul, Hany; Filius, Krag; Rivers, Tim

2000-01-01

Since 1989 the US Army Construction Engineering Research Laboratories (USACERL) have been active participants in the research and development towards establishing Plasma Arc Technology (PAT) as an efficient, economical, and safe hazardous waste immobilization tool. A plasma torch capable of generating high temperatures makes this technology a viable and powerful tool for the thermal destruction of various military industrial waste streams into an innocuous ceramic material no longer requiring hazardous waste landfill disposal. The emerging plasma environmental thermal treatment process has been used to safely and efficiently meet the waste disposal needs for various demilitarized components disposal needs, such as: (1) pyrotechnic smoke assemblies, (2) thermal batteries, (3) proximity fuses, (4) cartridge actuated devices (CADs), and (5) propellant actuated devices (PADs). MSE Technology Applications, Inc., (MSE) has proposed and fabricated a Mobile Plasma Treatment System to be a technology demonstrator for pilotscale mobile plasma waste processing. The system is capable of providing small-scale waste remediation services, and conducting waste stream applicability demonstrations. The Mobile Plasma Treatment System's innovative concept provides the flexibility to treat waste streams at numerous sites and sites with only a limited quantity of waste, yet too hazardous to transport to a regional fixed facility. The system was designed to be operated as skid mounted modules; consisting of a furnace module, controls module, offgas module, and ancillary systems module. All system components have been integrated to be operated from a single control station with both semi-continuous feeding and batch slag-pouring capability.

Commit to Building on New England's "Employability" Advantage!

Science.gov (United States)

Gittell, Ross

2017-01-01

Higher education has provided New England with an economic advantage, as the region without strong natural resource advantages has relied on its higher education institutions (HEIs) and brainpower. A higher education-based economic advantage has enabled the region to develop strong well-paying technology and knowledge-based industries tied to New…

Polyploidy in haloarchaea: advantages for growth and survival

Directory of Open Access Journals (Sweden)

Karolin eZerulla

2014-06-01

Full Text Available The investigated haloarchaeal species, Halobacterium salinarum, Haloferax mediterranii, and H. volcanii, have all been shown to be polyploid. They contain several replicons that have independent copy number regulation, and most have a higher copy number during exponential growth phase than stationary phase. The possible evolutionary advantages of polyploidy for haloarchaea, most of which have experimental support for at least one species, are discussed. These advantages include a low mutation rate and high resistance towards X-ray irradiation and desiccation, which depend on homologous recombination. For H. volcanii, it has been shown that gene conversion operates in the absence of selection, which leads to the equalization of genome copies. On the other hand, selective forces might lead to heterozygous cells, which have been verified in the laboratory. Additional advantages of polyploidy are survival over geological times in halite deposits as well as at extreme conditions on earth and at simulated Mars conditions. Recently, it was found that H. volcanii uses genomic DNA as genetic material and as a storage polymer for phosphate. In the absence of phosphate, H. volcanii dramatically decreases its genome copy number, thereby enabling cell multiplication, but diminishing the genetic advantages of polyploidy. Stable storage of phosphate is proposed as an alternative driving force for the emergence of DNA in early evolution. Several additional potential advantages of polyploidy are discussed that have not been addressed experimentally for haloarchaea. An outlook summarizes selected current trends and possible future developments.

Publication misrepresentation among anesthesiology residency applicants.

Science.gov (United States)

Neuman, Stephanie A; Long, Timothy R; Rose, Steven H

2011-03-01

Publication misrepresentation has been documented among applicants for residency positions in several specialties. However, these data are not available for anesthesiology applicants. Our purpose in this study was to document the prevalence of publication misrepresentation among applicants to a single anesthesiology residency, to compare anesthesiology publication misrepresentation data with similar data in other specialties, and to determine how often publication misrepresentation leads to an unfair competitive advantage in the application process. Applications to the Mayo School of Graduate Medical Education anesthesiology core residency in Rochester, Minnesota, were reviewed for publication misrepresentations using Medline and PubMed databases, Mayo Clinic library databases, and/or review by a qualified medical librarian. Misrepresented publications underwent further review to identify fraudulent publications and/or citation errors that provide an unfair competitive advantage. The authors found that 2.4% of the applications (13 of 532) included fraudulent publications, 6.6% of the applications with at least 1 publication (13 of 197) included ≥1 that was fraudulent, and 2.9% of all cited publications (15 of 522) were fraudulent. In addition, 0.9% of the applications (5 of 532) contained a citation error that, although not grossly fraudulent, could have favorably affected the applicant's competitiveness for a residency position. Misrepresented publications were fairly common among anesthesiology residency applicants. However, only a small percentage of applicants listed misrepresented publications that were clearly fraudulent or contained a citation error that conferred a competitive advantage. Identification of fraudulent publications on Electronic Residency Application Service applications is important to maintain the integrity of the application process.

THE RELATIONSHIP BETWEEN ORGANISATIONAL RESOURCES, CAPABILITIES, SYSTEMS AND COMPETITIVE ADVANTAGE

Directory of Open Access Journals (Sweden)

Raduan Che Rose

2012-01-01

Full Text Available The main objective that business organisations in particular should strive to attain is achieving a competitive advantage position relative to their competitors.. This research empirically examined the importance of and emphasis placed on organisational resources, capabilities and systems in their relationships with competitive advantage. The overall findings indicated significant, positive effects of organisational resources, capabilities and systems collectively on competitive advantage, providing support and corroboration to the resource-based view (RBV. The total variance in competitive advantage accounted for by the multiple linear regression (MLR model was 56.2%. In short, the findings from this study have not only contributed to the literature on the issue of the relationship between organisational resources, capabilities, systems and competitive advantage, but also provided vital information to both practitioners and policy makers on the subject matter.

COMPETITIVE ADVANTAGES ENTERPRISES IN KOOPERATION RELATIONS

Directory of Open Access Journals (Sweden)

O. Mikitiuk

2013-09-01

Full Text Available Formation of new approaches to the definition of competitive advantage requires different ways to implement them according to market conditions. These paths can be cooperative relations entities that are implemented in the competitive advantage of enterprises in the new stage of development of a competitive society. The result of the interaction of small businesses with industrial and economic structures is the formation and development of such forms of cooperation entities as subcontracting, franchising, leasing, venture finance. The content of these forms is to integrate (interlacing of the functional areas of business including production of functional form is subcontracting relationships, forms of supply – franchising, industrial and financial shape – leasing as a form of innovative functional integration relations is venture financing.

ELECTRONIC BANKING ADVANTAGES FOR FINANCIAL SERVICES DELIVERY

Directory of Open Access Journals (Sweden)

Paun Dragos

2010-12-01

Full Text Available E-banking is a fully automatic service for traditionally banking customers products based on information technology platforms. E-banking services provide customer access to accounts, the ability to move their money between different accounts or making payments via e-channels. The advantages generated by this services have determined an accelerate developing of this industry over the entire world. This paper examines some of the advantages of electronic banking products together with the characteristic management issues generated by the implementation of this new channel for financial services delivery.

The role of Entrepreneurial Universities in interfacing Competitive Advantages: The Case of Beira Interior region (Portugal)

OpenAIRE

Ferreira, Joao; Leitão, João; Raposo, Mario

2006-01-01

This paper reveals the importance of a local entrepreneurial university in interfacing competitive advantages, by assuming the condition of most influent and dynamic engine of regional development. The strategic diagnosis provides the identification of a dominant quadrant in the TOWS matrix application to the Beira Interior region, which is dominated by Mini-Maxi strategies. For improving the competitive positioning of that region, the transition from the dominant quadrant (Mini-Maxi) t...

Plant circadian clocks increase photosynthesis, growth, survival, and competitive advantage.

Science.gov (United States)

Dodd, Antony N; Salathia, Neeraj; Hall, Anthony; Kévei, Eva; Tóth, Réka; Nagy, Ferenc; Hibberd, Julian M; Millar, Andrew J; Webb, Alex A R

2005-07-22

Circadian clocks are believed to confer an advantage to plants, but the nature of that advantage has been unknown. We show that a substantial photosynthetic advantage is conferred by correct matching of the circadian clock period with that of the external light-dark cycle. In wild type and in long- and short-circadian period mutants of Arabidopsis thaliana, plants with a clock period matched to the environment contain more chlorophyll, fix more carbon, grow faster, and survive better than plants with circadian periods differing from their environment. This explains why plants gain advantage from circadian control.

Trust, Commitment and Competitive Advantage in SMEs Export Performance

Directory of Open Access Journals (Sweden)

Md Daud Ismail

2017-04-01

Full Text Available The entry of small businesses into international markets has intensified. However, despite the growing presence of small businesses in international markets, studies into their international behavior, particularly regarding the effect of international relationships on international outcomes, remain limited. This study investigates the cross-border relationships of Small and Medium Enterprises (SMEs by examining the effects of the dimensions of the key relationship on the competitive advantage and performance of SMEs in export markets. These dimensions include trust and commitment. Results indicate that trust is significantly related to commitment and export performance. Commitment is positively related to competitive advantage but not to export performance. Trust affects competitive advantage through commitment. The effect of commitment on export performance is mediated by competitive advantage. The methodology and results are presented. The conclusion, implications, and limitations of this study are also discussed.

Mission and System Advantages of Iodine Hall Thrusters

Science.gov (United States)

Dankanich, John W.; Szabo, James; Pote, Bruce; Oleson, Steve; Kamhawi, Hani

2014-01-01

The exploration of alternative propellants for Hall thrusters continues to be of interest to the community. Investments have been made and continue for the maturation of iodine based Hall thrusters. Iodine testing has shown comparable performance to xenon. However, iodine has a higher storage density and resulting higher ?V capability for volume constrained systems. Iodine's vapor pressure is low enough to permit low-pressure storage, but high enough to minimize potential adverse spacecraft-thruster interactions. The low vapor pressure also means that iodine does not condense inside the thruster at ordinary operating temperatures. Iodine is safe, it stores at sub-atmospheric pressure, and can be stored unregulated for years on end; whether on the ground or on orbit. Iodine fills a niche for both low power (10kW) electric propulsion regimes. A range of missions have been evaluated for direct comparison of Iodine and Xenon options. The results show advantages of iodine Hall systems for both small and microsatellite application and for very large exploration class missions.

Indonesian Comparative Advantage Entering the ASEAN Economic Community

Directory of Open Access Journals (Sweden)

Riandi .

2017-03-01

Full Text Available The purpose of this study is to examine the comparative advantage of Indonesian commodities in order to enter the ASEAN Economic Community (AEC. This study uses the export data during the period of 2003-2013 among five ASEAN countries participating in the AEC, including Indonesia, Malaysia, The Philippines, Singapore, and Thailand. All data obtained from the UN Comtrade database following the Harmonized System (HS at the two-digit classification level. This study applies dynamic revealed comparative advantage (DRCA index developed by Edwards and Schoer (2001 which is the development of revealed comparative advantage (RCA index by Balassa (1965. The results show that Indonesia is ready to enter the AEC. From this research, there are several Indonesian main commodities which have comparative advantage in ASEAN, including fish, crustaceans, molluscs, aquatic invertebrates ones (HS-03, edible fruit, nuts, peel of citrus fruit, melons (HS-08, oil seed, oleagic fruits, grain, seed, fruit, etc, nes (HS-12, lac, gums, resins, vegetable saps and extracts nes (HS-13, rubber and articles thereof (HS-40, paper & paperboard, articles of pulp, paper and board (HS-48, special woven or tufted fabric, lace, tapestry etc (HS-58, articles apparel, accessories, not knit or crochet (HS-62, and vehicles other than railway, tramway (HS-87. Those commodities are in line with Indonesian government export's strategy direction which mainly focuses on several sectors, including fishery, vegetable products, rubber, wood and wood products, textiles, and transportation. Therefore, Indonesian government should focus to improve those commodities in AEC. Keywords: Indonesian Comparative Advantage, Main Export Commodities, Export Strategy Direction, ASEAN Economic Community

Water hydraulic applications in hazardous environments

International Nuclear Information System (INIS)

Siuko, M.; Koskinen, K.T.; Vilenius, M.J.

1996-01-01

Water hydraulic technology provides several advantages for devices operating in critical environment. Though water hydraulics has traditionally been used in very rough applications, gives recent strong development of components possibility to build more sophisticated applications and devices with similar capacity and control properties than those of oil hydraulics without the disadvantages of oil hydraulic systems. In this paper, the basic principles, possibilities and advantages of water hydraulics are highlighted, some of the most important design considerations are presented and recent developments of water hydraulic technology are presented. Also one interesting application area, ITER fusion reactor remote handling devices, are discussed. (Author)

Hidden Advantages and Disadvantages of Social Class.

Science.gov (United States)

Goudeau, Sébastien; Croizet, Jean-Claude

2017-02-01

Three studies conducted among fifth and sixth graders examined how school contexts disrupt the achievement of working-class students by staging unfair comparison with their advantaged middle-class peers. In regular classrooms, differences in performance among students are usually showcased in a way that does not acknowledge the advantage (i.e., higher cultural capital) experienced by middle-class students, whose upbringing affords them more familiarity with the academic culture than their working-class peers have. Results of Study 1 revealed that rendering differences in performance visible in the classroom by having students raise their hands was enough to undermine the achievement of working-class students. In Studies 2 and 3, we manipulated students' familiarity with an arbitrary standard as a proxy for social class. Our results suggest that classroom settings that make differences in performance visible undermine the achievement of the students who are less familiar with academic culture. In Study 3, we showed that being aware of the advantage in familiarity with a task restores the performance of the students who have less familiarity with the task.

Contextual Advantage for State Discrimination

Science.gov (United States)

Schmid, David; Spekkens, Robert W.

2018-02-01

Finding quantitative aspects of quantum phenomena which cannot be explained by any classical model has foundational importance for understanding the boundary between classical and quantum theory. It also has practical significance for identifying information processing tasks for which those phenomena provide a quantum advantage. Using the framework of generalized noncontextuality as our notion of classicality, we find one such nonclassical feature within the phenomenology of quantum minimum-error state discrimination. Namely, we identify quantitative limits on the success probability for minimum-error state discrimination in any experiment described by a noncontextual ontological model. These constraints constitute noncontextuality inequalities that are violated by quantum theory, and this violation implies a quantum advantage for state discrimination relative to noncontextual models. Furthermore, our noncontextuality inequalities are robust to noise and are operationally formulated, so that any experimental violation of the inequalities is a witness of contextuality, independently of the validity of quantum theory. Along the way, we introduce new methods for analyzing noncontextuality scenarios and demonstrate a tight connection between our minimum-error state discrimination scenario and a Bell scenario.

Contextual Advantage for State Discrimination

Directory of Open Access Journals (Sweden)

David Schmid

2018-02-01

Full Text Available Finding quantitative aspects of quantum phenomena which cannot be explained by any classical model has foundational importance for understanding the boundary between classical and quantum theory. It also has practical significance for identifying information processing tasks for which those phenomena provide a quantum advantage. Using the framework of generalized noncontextuality as our notion of classicality, we find one such nonclassical feature within the phenomenology of quantum minimum-error state discrimination. Namely, we identify quantitative limits on the success probability for minimum-error state discrimination in any experiment described by a noncontextual ontological model. These constraints constitute noncontextuality inequalities that are violated by quantum theory, and this violation implies a quantum advantage for state discrimination relative to noncontextual models. Furthermore, our noncontextuality inequalities are robust to noise and are operationally formulated, so that any experimental violation of the inequalities is a witness of contextuality, independently of the validity of quantum theory. Along the way, we introduce new methods for analyzing noncontextuality scenarios and demonstrate a tight connection between our minimum-error state discrimination scenario and a Bell scenario.

Cognitive advantage in bilingualism: an example of publication bias?

Science.gov (United States)

de Bruin, Angela; Treccani, Barbara; Della Sala, Sergio

2015-01-01

It is a widely held belief that bilinguals have an advantage over monolinguals in executive-control tasks, but is this what all studies actually demonstrate? The idea of a bilingual advantage may result from a publication bias favoring studies with positive results over studies with null or negative effects. To test this hypothesis, we looked at conference abstracts from 1999 to 2012 on the topic of bilingualism and executive control. We then determined which of the studies they reported were subsequently published. Studies with results fully supporting the bilingual-advantage theory were most likely to be published, followed by studies with mixed results. Studies challenging the bilingual advantage were published the least. This discrepancy was not due to differences in sample size, tests used, or statistical power. A test for funnel-plot asymmetry provided further evidence for the existence of a publication bias. © The Author(s) 2014.

[Internet research methods: advantages and challenges].

Science.gov (United States)

Liu, Yi; Tien, Yueh-Hsuan

2009-12-01

Compared to traditional research methods, using the Internet to conduct research offers a number of advantages to the researcher, which include increased access to sensitive issues and vulnerable / hidden populations; decreased data entry time requirements; and enhanced data accuracy. However, Internet research also presents certain challenges to the researcher. In this article, the advantages and challenges of Internet research methods are discussed in four principle issue areas: (a) recruitment, (b) data quality, (c) practicality, and (d) ethics. Nursing researchers can overcome problems related to sampling bias and data truthfulness using creative methods; resolve technical problems through collaboration with other disciplines; and protect participant's privacy, confidentiality and data security by maintaining a high level of vigilance. Once such issues have been satisfactorily addressed, the Internet should open a new window for Taiwan nursing research.

The second leg home advantage: evidence from European football cup competitions.

Science.gov (United States)

Page, Lionel; Page, Katie

2007-12-01

The home advantage is a widely acknowledged sporting phenomenon, especially in association football. Here, we examine the second leg home advantage, an effect that is discussed in the public domain but which has received very little scientific attention. The second leg home advantage effect occurs when on average teams are more likely to win a two-stage knock-out competition when they play at home in the second leg. That is, both teams have a home advantage but this advantage is significantly greater for the team that plays at home second. Examining data from three different European Cup football competitions spanning 51 years, we show that the second leg home advantage is a real phenomenon. The second leg home team has more than a 50% probability to qualify for the next round in the competition even after controlling for extra time and team ability as possible alternative explanations. The second leg home advantage appears, however, to have decreased significantly over the past decade. Possible reasons for its existence and subsequent decline are presented.

Is there any advantage from the hybrid imaging diagnostic?

International Nuclear Information System (INIS)

Kostadinova, I.

2012-01-01

The hybrid imaging methods- Single Photon Emission Tomography-Computer Tomography / SPECT-CT / and Positron Emission Tomography-Computer Tomography / PET-CT/ allow receiving of combined image of two different techniques. In such a way it is possible to superimpose detailed anatomical image of the multislice spiral computer tomography with specific and sensitive molecular images of the SPECT and PET in a single study, allowing utilization of the full possibilities of the both techniques. They have advantages and disadvantages, which basically stem from the differences in the used radiopharmaceuticals and their physical properties. In PET-CT-positron emitters are applied, most often 18F and 11C, while-in SPECT-CT - single photon emitters, most often 99mTc and 131I. A disadvantage of PET is a high cost, which is produced in cyclotron and its logistics is complicated. The great advantage of PET is its better spatial resolution, compared to SPECT, because of the possibility to for simultaneous detection of pared photons and better registration. These techniques, especially PET-CT are nowadays the most increasing imaging methods in the world in making diagnosis, staging and following the effect of treatment in patients with oncological, neurological, cardiological, orthopedic diseases and infections. Recently, they are applied for the purposes of radiotherapy planning on the basis of the metabolically active tumour. As a final result, compared to the conventional techniques- roentgenography, computer tomography and magnetic resonance imaging, it is possible in many cases to make an early and more precise diagnosis and to safe time for the patient for adequate treatment. As a conclusion it is clear, that the hybrid imaging has future and its application will increase in future

AquAdvantage Salmon Genetically modified organism

OpenAIRE

Núñez Saurí, Ester; Universitat Autònoma de Barcelona. Facultat de Veterinària

2014-01-01

Póster AquAdvantage Salmon is a genetically modified organism developed by AquBounty Technologies. The objective of this transgenic organism is to increase the growth rate to obtain the same of conventional salmon faster.

Home advantage in speed skating : Evidence from individual data

NARCIS (Netherlands)

Koning, RH

Home advantage is a well-documented phenomenon in many sports. Home advantage has been shown to exist for team sports (soccer, hockey, football, baseball, basketball) and for countries organizing sports tournaments like the Olympics and World Cup Soccer. There is also some evidence for home

Thoracoscopic versus robotic approaches: advantages and disadvantages.

Science.gov (United States)

Wei, Benjamin; D'Amico, Thomas A

2014-05-01

The overall advantages of thoracoscopy over thoracotomy in terms of patient recovery have been fairly well established. The use of robotics, however, is a newer and less proven modality in the realm of thoracic surgery. Robotics offers distinct advantages and disadvantages in comparison with video-assisted thoracoscopic surgery. Robotic technology is now used for a variety of complex cardiac, urologic, and gynecologic procedures including mitral valve repair and microsurgical treatment of male infertility. This article addresses the potential benefits and limitations of using the robotic platform for the performance of a variety of thoracic operations. Copyright © 2014 Elsevier Inc. All rights reserved.

CREATING A CORPORATE ENTREPRENEURSHIP STRATEGY FOR COMPETITIVE ADVANTAGE

OpenAIRE

ENGİNOĞLU, Didem; ARIKAN, Cenk Laçin

2016-01-01

Current competitive environment is rapidly changing. In today’s business environment, organizations are having an increasingly difficult time in creating competitive advantages. The main reason for this is the ease in contemporary business life for organizations to reach the same or very similar resources. Firms need innovation to create and sustain success and effectiveness. In such a highly competitive business life, the importance of creating competitive advantages for organizations based ...

Modern Paradigm of Ensuring Competitive Advantages of an Enterprise

Directory of Open Access Journals (Sweden)

Klymchuk Alyona O.

2014-01-01

Full Text Available The article considers evolution of development of the paradigm of ensuring competitive advantages of an enterprise. Foreign and domestic scientists focus on individual directions of development of competitive advantages and pay insufficient attention to new management concepts – development of the information society, knowledge economy and dynamism of integration processes. The goal of the study is formation of the modern paradigm of ensuring competitive advantages of an enterprise with consideration of tendencies of development of the knowledge economy, information society and integration processes. Enterprise competitiveness is a synergetic characteristic, which reflects enterprise capability of dynamic response to changes of the market situation with the aim of keeping predominance over other economic subjects. Management of the future, on the basis of the management 2.0 concept, should take into account interests not only of top management and shareholders but also employees, local communities and territories and meet requirements of the society in general, individual groups of consumers and tendencies of development of managerial and information technologies. The paradigm of the modern theory of ensuring competitive advantages should include models of keeping competitive advantages in the existing markets and models of development of future markets; strategy of development of enterprise competitiveness, human capital development and efficient enterprise management.

Tanzania's Revealed Comparative Advantage and Structural ...

African Journals Online (AJOL)

example, the contribution from vegetable products fell by 7%, and that from textiles .... 43 -‐ Furskins and artificial fur, manufactures thereof ... example, while Tanzania has comparative advantage in raw hides and skins (see Figure 6), it.

Blood Transfusion In Surgical Children: The Advantages And Hazards

African Journals Online (AJOL)

The increasing opposition to blood transfusion makes the management of surgical children who require blood very challenging. This retrospective study reviews records of blood transfusion so as to determine the advantages and hazards in surgical children. The advantages and hazards of blood transfusion in surgical ...

Home advantage in speed skating : evidence from individual data

NARCIS (Netherlands)

Koning, Ruud H.

2003-01-01

Home advantage is a well documented phenomena in many types of sports. Home advantage has been shown to exist for team sports (soccer, hockey, football, baseball, basketball) and for countries organizing sports tournaments like the Olympics and World Cup Soccer. There is also some evidence for home

The Real Transformation: Building and Maintaining Long-Term Competitive Advantage

Science.gov (United States)

2003-01-01

TERM COMPETITIVE ADVANTAGE LTC EDWARD C. CARDON, USA A TRANFORMATION PAPER FOR THE CHAIRMAN OF THE JOINT CHIEFS OF STAFF SEMINAR...SUBTITLE The Real Transformation: Building and Maintaining Long-Term Competitive Advantage 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT...long-term military competitive advantage in comparison to the rest of the world.4 This approach suggests a model that places competition as the

B2B oriented on-line applications generator

OpenAIRE

Vintilă Bogdan-Cătălin

2008-01-01

B2B applications are presented. Quality characteristics of B2B applications are defined. B2B application structure is defined. The application for contracts is developed. The advantages are identified.

78 FR 2960 - Request for Comments on Preparation of Patent Applications

Science.gov (United States)

2013-01-15

... seeking public comment on advantages and disadvantages of applicants employing the following practices... comments on advantages and disadvantages of applicants employing the following practices when preparing... the specification and/or claims, particularly for inventions related to certain technologies, such as...

The Survival Advantage: Underlying Mechanisms and Extant Limitations

Directory of Open Access Journals (Sweden)

Stephanie A. Kazanas

2015-04-01

Full Text Available Recently, researchers have begun to investigate the function of memory in our evolutionary history. According to Nairne and colleagues (e.g., Nairne, Pandeirada, and Thompson, 2008; Nairne, Thompson, and Pandeirada, 2007, the best mnemonic strategy for learning lists of unrelated words may be one that addresses the same problems that our Pleistocene ancestors faced: fitness-relevant problems including securing food and water, as well as protecting themselves from predators. Survival processing has been shown to promote better recall and recognition memory than many well-known mnemonic strategies (e.g., pleasantness ratings, imagery, generation, etc.. However, the survival advantage does not extend to all types of stimuli and tasks. The current review presents research that has replicated Nairne et al.'s (2007 original findings, in addition to the research designs that fail to replicate the survival advantage. In other words, there are specific manipulations in which survival processing does not appear to benefit memory any more than other strategies. Potential mechanisms for the survival advantage are described, with an emphasis on those that are the most plausible. These proximate mechanisms outline the memory processes that may contribute to the advantage, although the ultimate mechanism may be the congruity between the survival scenario and Pleistocene problem-solving.

Structural and mechanical design challenges of space shuttle solid rocket boosters separation and recovery subsystems

Science.gov (United States)

Woodis, W. R.; Runkle, R. E.

1985-01-01

The design of the space shuttle solid rocket booster (SRB) subsystems for reuse posed some unique and challenging design considerations. The separation of the SRBs from the cluster (orbiter and external tank) at 150,000 ft when the orbiter engines are running at full thrust meant the two SRBs had to have positive separation forces pushing them away. At the same instant, the large attachments that had reacted launch loads of 7.5 million pounds thrust had to be servered. These design considerations dictated the design requirements for the pyrotechnics and separation rocket motors. The recovery and reuse of the two SRBs meant they had to be safely lowered to the ocean, remain afloat, and be owed back to shore. In general, both the pyrotechnic and recovery subsystems have met or exceeded design requirements. In twelve vehicles, there has only been one instance where the pyrotechnic system has failed to function properly.

The Home-based Advantages and a Hierarchy of Location Advantages: Foreign and British-owned Firms in the London Wholesale Insurance Market

OpenAIRE

Lilach Nachum

2003-01-01

This study seeks to explain why, in some cases, locationally advantageous countries attract foreign firms, who develop dominant competitive positions in the market, rather than facilitate the development of internationally competitive national firms, as theory suggests. Comparative analyses of samples of foreign and British-owned insurance firms in the London wholesale insurance market are used to establish a hierarchy of location advantages in terms of their competitive importance. It is sho...

First-dollar cost-sharing for skilled nursing facility care in medicare advantage plans.

Science.gov (United States)

Keohane, Laura M; Grebla, Regina C; Rahman, Momotazur; Mukamel, Dana B; Lee, Yoojin; Mor, Vincent; Trivedi, Amal

2017-08-29

The initial days of a Medicare-covered skilled nursing facility (SNF) stay may have no cost-sharing or daily copayments depending on beneficiaries' enrollment in traditional Medicare or Medicare Advantage. Some policymakers have advocated imposing first-dollar cost-sharing to reduce post-acute expenditures. We examined the relationship between first-dollar cost-sharing for a SNF stay and use of inpatient and SNF services. We identified seven Medicare Advantage plans that introduced daily SNF copayments of $25-$150 in 2009 or 2010. Copays began on the first day of a SNF admission. We matched these plans to seven matched control plans that did not introduce first-dollar cost-sharing. In a difference-in-differences analysis, we compared changes in SNF and inpatient utilization for the 172,958 members of intervention and control plans. In intervention plans the mean annual number of SNF days per 100 continuously enrolled inpatients decreased from 768.3 to 750.6 days when cost-sharing changes took effect. Control plans experienced a concurrent increase: 721.7 to 808.1 SNF days per 100 inpatients (adjusted difference-in-differences: -87.0 days [95% CI (-112.1,-61.9)]). In intervention plans, we observed no significant changes in the probability of any SNF service use or the number of inpatient days per hospitalized member relative to concurrent trends among control plans. Among several strategies Medicare Advantage plans can employ to moderate SNF use, first-dollar SNF cost-sharing may be one influential factor. Not applicable.

An investigation of home advantage in the Summer Paralympic Games.

Science.gov (United States)

Wilson, Darryl; Ramchandani, Girish

2017-01-01

There is a paucity of home advantage research set in the context of para-sport events. It is this gap in the knowledge that this paper addresses by investigating the prevalence and size of home advantage in the Summer Paralympic Games. Using a standardised measure of success, we compared the performances of nations when competing at home with their own performances away from home in the competition between 1960 and 2016. Both country-level and individual sport-level analyses were conducted for this time frame. A Wilcoxon signed rank test was used to determine whether there was a genuine difference in nations' performance under host and non-host conditions. Spearman's rank-order correlation was run to assess the relationship between nation quality and home advantage. Strong evidence of a home advantage effect in the Summer Paralympic Games was found at country level ( p   0.10). While our results confirm that home advantage is prevalent in the Summer Paralympic Games at an overall country level and within specific sports, they do not explain fully why such an effect does exist. Future studies should investigate the causes of home advantage in the competition and also draw comparisons with the Summer Olympic Games to explore any differences between para-sport events and able-bodied events.

Undermatched? School-Based Linguistic Status, College Going, and the Immigrant Advantage

Science.gov (United States)

Callahan, Rebecca M.; Humphries, Melissa H.

2016-01-01

Considerable research investigates the immigrant advantage--the academic benefit first- and second-generation students experience relative to native-born peers. However, little work examines how school-based linguistic status may influence this advantage. Contradictory patterns exist: Research identifies both an immigrant advantage and a language…

Stimulus-dependent effects on right ear advantage in schizophrenia

Directory of Open Access Journals (Sweden)

Smucny J

2012-09-01

Full Text Available Jason Smucny,1,3 Korey Wylie,3 Jason Tregellas1–31Neuroscience Program, University of Colorado Anschutz Medical Campus, 2Research Science, Denver VA Medical, Center, 3Department of Psychiatry, University of Colorado Anschutz Medical Campus, Aurora, CO, USABackground: When presented with different sounds in each ear (dichotic listening, healthy subjects typically show a preference for stimuli heard in the right ear, an effect termed "right ear advantage". Previous studies examining right ear advantage in schizophrenia have been inconsistent, showing either decreased or increased advantage relative to comparison subjects. Given evidence for enhanced semantic processing in schizophrenia, some of this inconsistency may be due to the type of stimuli presented (words or syllables. The present study examined right ear advantage in patients and controls using both words and syllables as stimuli.Methods: Right ear advantage was compared between 20 patients with schizophrenia and 17 healthy controls. Two versions of the task were used, ie, a consonant-vowel pairing task and a fused rhymed words task.Results: A significant group × task interaction was observed. Relative to healthy controls, patients showed a greater difference on the syllable-based task compared with the word-based task. The number of distractors marked during the syllable-based task was inversely correlated with score on the Global Assessment of Function Scale.Conclusion: The findings are consistent with a left hemisphere dysfunction in schizophrenia, but also suggest that differences may be stimulus-specific, with a relative sparing of the deficit in the context of word stimuli. Performance may be related to measures of social, occupational, and psychological function.Keywords: schizophrenia, right ear advantage, dichotic, distraction

Seeking the competitive advantage: it's more than cost reduction.

Science.gov (United States)

South, S F

1999-01-01

Most organizations focus considerable time and energy on reducing operating costs as a way to attain marketplace advantage. This strategy was not inappropriate in the past. To be competitive in the future, however, focus must be placed on other issues, not just cost reduction. The near future will be dominated by service industries, knowledge management, and virtual partnerships, with production optimization and flexibility, innovation, and strong partnerships defining those organizations that attain competitive advantage. Competitive advantage will reside in clarifying the vision and strategic plan, reviewing and redesigning work processes to optimize resources and value-added work, and creating change-ready environments and empowered workforces.

THE TAX ADVANTAGES OF INCOME TAX PAYERS

Directory of Open Access Journals (Sweden)

SUCIU GHEORGHE

2015-04-01

Full Text Available The paper analyzes the cost of financing through financial and operational leasing due to the deductibility of depreciation and interest. The shareholders of any company aim to obtain profit and to increase their ownership equity. In order for this to happen, the company must have profit, for which a corporate tax must be paid. A good management translates into choosing the most advantageous means of financing, which will lead to paying a lower corporate tax. Leasing and the non-taxation of reinvested profits are two means through which companies can obtain significant fiscal advantages, by increasing the deductible expenses, or by paying lower taxes.

Advantages of Intelligent SDH/SONET Networks

Indian Academy of Sciences (India)

First page Back Continue Last page Overview Graphics. Advantages of Intelligent SDH/SONET Networks. GMPLS simplifies network management, thus reducing operating expenses (“staff”) and minimizing errors. Same benefits as computerization of banking, accounts, etc. Auto-discovery simplifies equipment installation ...

The advantages of deep ocean water for the development of functional fermentation food.

Science.gov (United States)

Lee, Chun-Lin

2015-03-01

Deep ocean water (DOW) is obtained from 600 m below the sea surface. In recent years, DOW has been applied in the development of fermentation biotechnologies and functional foods. DOW is rich in trace minerals, comprises multiple physiological and health functions, and is able to promote microbe growth; therefore, the application of DOW directly benefits the development of the fermentation industry and functional foods. This study integrated the current health functions and applications of DOW with the latest results from studies related to fermentation biotechnology. Subsequently, the influence of applying DOW in fermented functional food development and the effects in health function improvements were summarized. According to the previous studies, the main reasons for the increased effect of fermented functional foods through the application of DOW are increased generation of functional metabolite contents in the microbes, intrinsic health functions of DOW, and the microbial use of mechanisms of converting the absorbed inorganic ions into highly bioavailable organic ions for the human body. These combined advantages not only enhance the health functions of fermentation products but also provide fermentation products with the intrinsic health functions of DOW.

Implementation of marketing strategy: Factor of competitive advantage

OpenAIRE

Krstić Ivan; Becić Sonja

2011-01-01

Primary objective of the company is to reach the business success. Competitors have the same objective. Only the companies that really meet the consumer's needs and demands survive in the competitive struggle. The company who succeeds in it, has the possibility to achieve the competitive advantage as well. The company has to have the adequate marketing strategy in order to fulfill the marketing objectives and achieve the competitive advantage. The marketing strategy should be flexible and pro...

A longitudinal study of memory advantages in bilinguals.

Directory of Open Access Journals (Sweden)

Jessica K Ljungberg

Full Text Available Typically, studies of cognitive advantages in bilinguals have been conducted previously by using executive and inhibitory tasks (e.g. Simon task and applying cross-sectional designs. This study longitudinally investigated bilingual advantages on episodic memory recall, verbal letter and categorical fluency during the trajectory of life. Monolingual and bilingual participants (n=178 between 35-70 years at baseline were drawn from the Betula Prospective Cohort Study of aging, memory, and health. Results showed that bilinguals outperformed monolinguals at the first testing session and across time both in episodic memory recall and in letter fluency. No interaction with age was found indicating that the rate of change across ages was similar for bilinguals and monolinguals. As predicted and in line with studies applying cross-sectional designs, no advantages associated with bilingualism were found in the categorical fluency task. The results are discussed in the light of successful aging.

Electrophysiological explorations of the bilingual advantage: evidence from a Stroop task.

Science.gov (United States)

Coderre, Emily L; van Heuven, Walter J B

2014-01-01

Bilinguals have been shown to exhibit a performance advantage on executive control tasks, outperforming their monolingual counterparts. Although a wealth of research has investigated this 'bilingual advantage' behaviourally, electrophysiological correlates are lacking. Using EEG with a Stroop task that manipulated the stimulus onset asynchrony (SOA) of word and colour presentation, the current study addressed two facets of the bilingual advantage. The possibility that bilinguals experience superior conflict processing relative to monolinguals (a 'conflict-specific advantage') was investigated by comparing behavioural interference effects as well as the amplitude of the Ninc, a conflict-related ERP component occurring from approximately 300-500 ms after the onset of conflict. In contrast, the hypothesis that bilinguals experience domain-general, conflict-independent enhancements in executive processing (a 'non-conflict-specific advantage') was evaluated by comparing the control condition (symbol strings) between groups. There was some significant, but inconsistent, evidence for a conflict-specific bilingual advantage. In contrast, strong evidence emerged for a non-conflict-specific advantage, with bilinguals demonstrating faster RTs and reduced ERP amplitudes on control trials compared to monolinguals. Importantly, when the control stimulus was presented before the colour, ERPs to control trials revealed group differences before the onset of conflict, suggesting differences in the ability to ignore or suppress distracting irrelevant information. This indicates that bilinguals experience superior executive processing even in the absence of conflict and semantic salience, and suggests that the advantage extends to more efficient proactive management of the environment.

Electrophysiological explorations of the bilingual advantage: evidence from a Stroop task.

Directory of Open Access Journals (Sweden)

Emily L Coderre

Full Text Available Bilinguals have been shown to exhibit a performance advantage on executive control tasks, outperforming their monolingual counterparts. Although a wealth of research has investigated this 'bilingual advantage' behaviourally, electrophysiological correlates are lacking. Using EEG with a Stroop task that manipulated the stimulus onset asynchrony (SOA of word and colour presentation, the current study addressed two facets of the bilingual advantage. The possibility that bilinguals experience superior conflict processing relative to monolinguals (a 'conflict-specific advantage' was investigated by comparing behavioural interference effects as well as the amplitude of the Ninc, a conflict-related ERP component occurring from approximately 300-500 ms after the onset of conflict. In contrast, the hypothesis that bilinguals experience domain-general, conflict-independent enhancements in executive processing (a 'non-conflict-specific advantage' was evaluated by comparing the control condition (symbol strings between groups. There was some significant, but inconsistent, evidence for a conflict-specific bilingual advantage. In contrast, strong evidence emerged for a non-conflict-specific advantage, with bilinguals demonstrating faster RTs and reduced ERP amplitudes on control trials compared to monolinguals. Importantly, when the control stimulus was presented before the colour, ERPs to control trials revealed group differences before the onset of conflict, suggesting differences in the ability to ignore or suppress distracting irrelevant information. This indicates that bilinguals experience superior executive processing even in the absence of conflict and semantic salience, and suggests that the advantage extends to more efficient proactive management of the environment.

Islamic Banking in Nigeria: Perception of its Relative Advantage by ...

African Journals Online (AJOL)

Islamic Banking in Nigeria: Perception of its Relative Advantage by Consumer Segments in Anambra State. ... perceived relative advantage of Islamic banking concept by those consumer groups in. Awka ... AJOL African Journals Online.

An Assessment of "Sustainable Competitive Advantage" for Artex Limited, within the UK DIY Multiple Market Sector

OpenAIRE

Chambers, Craig Stephen

2007-01-01

Synopsis This dissertation critically examines the business of Artex Limited and the industry that it operates within, in the context of serving the UK DIY multiple market, a sector that the company is highly reliant on from a turnover and profit perspective. Through the practical application of a number of strategic assessment frameworks, and in conjunction with a study of the relevant literature, the principle objective is to test for empirical evidence of competitive advantage within ...

The contribution of human resources management systems in achieving competitive advantage

Directory of Open Access Journals (Sweden)

Anuta Porutiu

2010-12-01

Full Text Available Competition has become a current and difficult problem for any organization. This raises the need for the companies to obtain competitive advantages. One way to do this is making use of appropriate information technology, which is the task of information systems for top management. Computer technology and data communication technology alter the parameters within which competition unfolds in all fields. Whereas in the past information technology was oriented to data storage, in the modern world it must provide a dynamic vision on the organization, facilitating adaptation to changes in business environment and thus ensuring competitiveness. In this way, information technology becomes a competitive weapon which is extremely effective in achieving the objectives of the organization. In addition, it is applicable in any field of activity regardless of the organization’s size.

Perspectives and advantages of the use of excimer laser annealing for MOS technology

International Nuclear Information System (INIS)

Privitera, V.; Alippi, P.; Camalleri, M.

2006-01-01

The integration of excimer laser annealing (ELA) into the MOS device technology has been studied and evaluated within the frame of the IST project FLASH (Fundamentals and applications of laser processing for highly innovative MOS technology), funded by the European Commission. The final aim of the project was to demonstrate that ELA can be applied as a reliable, effective and advantageous process in the context of semiconductor device fabrication. Some of the results of this activity are summarised, relative to the experimental characterization and theoretical modelling. The electrical characterization of the transistor fabricated by ELA is also presented, showing a device yield of 90% on wafer

Interest alignment and competitive advantage

OpenAIRE

Gottschalg, Oliver; Zollo, Mauricio

2006-01-01

This paper articulates a theory of the conditions under which the alignment between individual and collective interests generates sustainable competitive advantage. The theory is based on the influence of tacitness, context-specificity and casual ambiguity in the determinants of different types of motivation (extrinsic, normative intrinsic and hedonic intrinsic), under varying conditions of environmental dynamism. The analysis indicates the need to consider mitivational processes as a complem...

Canadian competitive advantage

International Nuclear Information System (INIS)

Wills, J.

1997-01-01

The evolution of the Canadian petrochemical industry was outlined, emphasizing the proximity to feedstocks as the principal advantage enjoyed by the industry over its international competitors. Annual sales statistics for 1995 were provided. Key players in the Canadian petrochemical industry (Nova, Dow, DuPont, Methanex, Esso, Union Carbide, Shell and Celanese), their share of the market and key products were noted. Manufacturing facilities are located primarily in Alberta, southern Ontario and Quebec. The feedstock supply infrastructure, historical and alternative ethane pricing in Canada and the US, the North American market for petrochemicals, the competitiveness of the industry, tax competitiveness among Canadian provinces and the US, the Canada - US unit labour cost ratio, ethylene facility construction costs in Canada relative to the US Gulf Coast, and projected 1997 financial requirements were reviewed. 19 figs

Toward Multi-scale Modeling and simulation of conduction in heterogeneous materials

Energy Technology Data Exchange (ETDEWEB)

Lechman, Jeremy B. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Battaile, Corbett Chandler. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Bolintineanu, Dan [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Cooper, Marcia A. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Erikson, William W. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Foiles, Stephen M. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Kay, Jeffrey J [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Phinney, Leslie M. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Piekos, Edward S. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Specht, Paul Elliott [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Wixom, Ryan R. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Yarrington, Cole [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

2015-01-01

This report summarizes a project in which the authors sought to develop and deploy: (i) experimental techniques to elucidate the complex, multiscale nature of thermal transport in particle-based materials; and (ii) modeling approaches to address current challenges in predicting performance variability of materials (e.g., identifying and characterizing physical- chemical processes and their couplings across multiple length and time scales, modeling information transfer between scales, and statically and dynamically resolving material structure and its evolution during manufacturing and device performance). Experimentally, several capabilities were successfully advanced. As discussed in Chapter 2 a flash diffusivity capability for measuring homogeneous thermal conductivity of pyrotechnic powders (and beyond) was advanced; leading to enhanced characterization of pyrotechnic materials and properties impacting component development. Chapter 4 describes success for the first time, although preliminary, in resolving thermal fields at speeds and spatial scales relevant to energetic components. Chapter 7 summarizes the first ever (as far as the authors know) application of TDTR to actual pyrotechnic materials. This is the first attempt to actually characterize these materials at the interfacial scale. On the modeling side, new capabilities in image processing of experimental microstructures and direct numerical simulation on complicated structures were advanced (see Chapters 3 and 5). In addition, modeling work described in Chapter 8 led to improved prediction of interface thermal conductance from first principles calculations. Toward the second point, for a model system of packed particles, significant headway was made in implementing numerical algorithms and collecting data to justify the approach in terms of highlighting the phenomena at play and pointing the way forward in developing and informing the kind of modeling approach originally envisioned (see Chapter 6). In

Relation between competence and competitive advantages of the firm

OpenAIRE

Lavrova, Natalia

2014-01-01

Research paper was considered an aspect of competence as source of uniqueness organization and its competition advantages. It emphasizes the importance internal factors for get success of business. The article is divided into two parts: theoretical framework and case study, which suggests as the competence of the influence on the competitive advantages of firms in theory and practice.

The half-truth of first-mover advantage.

Science.gov (United States)

Suarez, Fernando; Lanzolla, Gianvito

2005-04-01

Many executives take for granted that the first company in a new product category gets an unbeatable head start and reaps long-lasting benefits. But that doesn't always happen. The authors of this article discovered that much depends on the pace at which the category's technology is changing and the speed at which the market is evolving. By analyzing these two factors, companies can improve their odds of succeeding as first movers with the resources they possess. Gradual evolution in both the technology and the market provides a first mover with the best conditions for creating a dominant position that is long lasting (Hoover in the vacuum cleaner industry is a good example). In such calm waters, a company can defend its advantages even without exceptional skills or extensive financial resources. When the market is changing rapidly and the product isn't, a first entrant with extensive resources can obtain a long-lasting advantage (as Sony did with its Walkman personal stereo); a company with only limited resources probably must settle for a short-term benefit. When the market is static but the product is changing constantly, first-mover advantages of either kind--durable or short-lived--are unlikely. Only companies with very deep pockets can survive (think of Sony and the digital cameras it pioneered). Rapid churn in both the technology and the market creates the worst conditions. But if companies have an acute sense of when to exit-as Netscape demonstrated when it agreed to be acquired by AOL-a worthwhile short-term gain is possible. Before venturing into a newly forming market, you need to analyze the environment, assess your resources, then determine which type offirst-mover advantage is most achievable. Once you've gone into the water, you have no choice but to swim.

Thermodynamic advantages of nuclear desalination through reverse osmosis

International Nuclear Information System (INIS)

Bhattacharyya, K.P.; Prabhakar, S.; Tewari, P.K.

2009-01-01

Seawater Reverse Osmosis (SWRO) integrated with nuclear power station has significant thermodynamic advantages since it can utilize the waste heat available in the condenser cooling circuit and electrical power from the nuclear power plant with provision for using grid power in case of exigencies and shared infrastructure. Coupling of RO plants to the reactor is simple and straightforward and power loss due to RO unit, resulting in the loss of load, does not impact reactor turbine. Product water contamination probability is also very less since it has in-built mechanical barrier. Preheat reverse osmosis desalination has many thermodynamic advantages and studies have indicated improved performance characteristics thereby leading to savings in operational cost. The significant advantages include the operational flexibility of the desalination systems even while power plant is non-operational and non-requirement of safety systems for resource utilization. This paper brings out a comprehensive assessment of reverse osmosis process as a stand-alone nuclear desalination system. (author)

Elasticity and mechanical advantage in cables and ropes

International Nuclear Information System (INIS)

O'Shea, M J

2007-01-01

The conditions under which one can gain mechanical advantage by pulling with a force F perpendicular to a cable (or rope) that is fixed at both ends are examined. While this is a commonly discussed example in introductory physics classes, its solution in terms of fundamental properties of the cable requires one to model the elasticity of the cable. This solution has several complex and interesting features, e.g. a large increase in the tension in the cable may occur upon application of F if (i) F lies in a certain range and (ii) the initial tension T 1 in the cable (before F is applied) satisfies T 1 < 0.0340 κ. Here, κ is the spring constant of a unit length of the cable. For steel cables and cables composed of other materials such as carbon nanorods where the elasticity is low, significant increases in tension are possible. Examples involving walking a tightrope and attempting to increase the tension in a rope hauling a load are considered. Two programs to solve the equations of this work are available in the electronic version of this journal

[The precautionary principle: advantages and risks].

Science.gov (United States)

Tubiana, M

2001-04-01

innovation, highly restrictive administrative procedures, and a waste of funds on the search for the utopian goal of zero risk. Other drawbacks are more insidious. The precautionary principle could contribute to a general feeling of anxiety and unease in the population. It could be used by campaigns to manipulate public opinion in favor of a particular commercial interest or ideology. Furthermore, practitioners and public policy makers could be led to make choices not dictated by a search for the optimal solution but rather a solution that would protect them from future accusations (the so-called umbrella phenomenon). On the international level, the precautionary principle must not be used to mask protectionism. Nevertheless, a clear advantage of the precautionary principle is that it requires decision-makers to explain the rationale behind their decisions, to quantify the risks, and to provide objective information. However, the physician must not be tempted to make patients sign documents certifying that they have been given all relevant information on his or her diagnosis and treatment. This example underlines the role of legal texts and jurisprudence in the application of the precautionary principle. Finally, the precautionary principle implies new obligations for the State. In the field of health and healthcare, the State must undertake actions based on fully open and undisguised decision-making and provide complete information to the public. A pplication of the precautionary principle requires much discernment because the final outcome can be beneficial or harmful, depending on the way it is implemented. The precautionary principle, and its applications, must be precise and detailed within a well-defined framework.

Demonstration of quantum advantage in machine learning

Science.gov (United States)

Ristè, Diego; da Silva, Marcus P.; Ryan, Colm A.; Cross, Andrew W.; Córcoles, Antonio D.; Smolin, John A.; Gambetta, Jay M.; Chow, Jerry M.; Johnson, Blake R.

2017-04-01

The main promise of quantum computing is to efficiently solve certain problems that are prohibitively expensive for a classical computer. Most problems with a proven quantum advantage involve the repeated use of a black box, or oracle, whose structure encodes the solution. One measure of the algorithmic performance is the query complexity, i.e., the scaling of the number of oracle calls needed to find the solution with a given probability. Few-qubit demonstrations of quantum algorithms, such as Deutsch-Jozsa and Grover, have been implemented across diverse physical systems such as nuclear magnetic resonance, trapped ions, optical systems, and superconducting circuits. However, at the small scale, these problems can already be solved classically with a few oracle queries, limiting the obtained advantage. Here we solve an oracle-based problem, known as learning parity with noise, on a five-qubit superconducting processor. Executing classical and quantum algorithms using the same oracle, we observe a large gap in query count in favor of quantum processing. We find that this gap grows by orders of magnitude as a function of the error rates and the problem size. This result demonstrates that, while complex fault-tolerant architectures will be required for universal quantum computing, a significant quantum advantage already emerges in existing noisy systems.

On the measurement of comparative advantage

NARCIS (Netherlands)

Hoen, A.R.; Oosterhaven, J.

This paper shows-that the standard measure of revealed comparative advantage (RCA), ranging from 0 to infinity, has problematic properties. Due to its multiplicative specification, it has a moving mean larger than its expected value of 1, while its distribution strongly depends on the number of

On the measurement of comparative advantage

NARCIS (Netherlands)

Hoen, Alex R.

2001-01-01

This article shows that the distribution of the standard measure of revealed comparative advantage (RCA), which runs from 0 to 8, has problematic properties. Due to its multiplicative specification, it has a moving mean without a useful interpretation, while its distribution depends on the number of

Bioremediation techniques-classification based on site of application: principles, advantages, limitations and prospects.

Science.gov (United States)

Azubuike, Christopher Chibueze; Chikere, Chioma Blaise; Okpokwasili, Gideon Chijioke

2016-11-01

Environmental pollution has been on the rise in the past few decades owing to increased human activities on energy reservoirs, unsafe agricultural practices and rapid industrialization. Amongst the pollutants that are of environmental and public health concerns due to their toxicities are: heavy metals, nuclear wastes, pesticides, green house gases, and hydrocarbons. Remediation of polluted sites using microbial process (bioremediation) has proven effective and reliable due to its eco-friendly features. Bioremediation can either be carried out ex situ or in situ, depending on several factors, which include but not limited to cost, site characteristics, type and concentration of pollutants. Generally, ex situ techniques apparently are more expensive compared to in situ techniques as a result of additional cost attributable to excavation. However, cost of on-site installation of equipment, and inability to effectively visualize and control the subsurface of polluted sites are of major concerns when carrying out in situ bioremediation. Therefore, choosing appropriate bioremediation technique, which will effectively reduce pollutant concentrations to an innocuous state, is crucial for a successful bioremediation project. Furthermore, the two major approaches to enhance bioremediation are biostimulation and bioaugmentation provided that environmental factors, which determine the success of bioremediation, are maintained at optimal range. This review provides more insight into the two major bioremediation techniques, their principles, advantages, limitations and prospects.

Achieving Competitive Advantage through Using an Integrated Multi-selling Model. The Case from Romanian Linjerie Producer: Jolidon

OpenAIRE

CUC Sunhilde

2011-01-01

Information and communication technologies applications and services have greatly influenced the behavior of both retailers andconsumers. In order to win new markets, to increase the sales and gain competitive advantages, e-commerce has been widely adopted in the fashion industry, particularly in the lingerie sector. The purposes of the paper were to examine the retailing formats in relation to e-business, to determine which were significantfactors affecting e-commerce and the distinctive asp...

Safety and environmental advantages of breeding blanketless fusion reactors

International Nuclear Information System (INIS)

Zucchetti, M.; Merola, M.; Matera, R.

1994-01-01

Next-step reactors will use DT cycle. However, environmental advantage will be the main chance for fusion to compete with other energy sources. The environmental problems of DT cycle due to tritium and neutron activation, are examined. Fusion commercial reactors could be based on alternative fuel cycles like D-He3. Advantages and disadvantages of this fuel cycle are outlined. All the technologies related with the self-breeding of tritium and the concept of breeding blanket itself may be not reactor relevant. In the frame of the Next-step studies, the potential advantages of intermediate DT devices without breeding blanket are discussed. Simplified design, lower cost, higher safety are the main ones. The problem of the source of tritium is examined. (author)

Competitive advantage for differentiation of Pereira International Free Trade Zone

Directory of Open Access Journals (Sweden)

Paola Andrea Echeverri Gutiérrez

2014-01-01

Full Text Available The best way to know if a company is at the heart of success is by determining its competitive advantage. For Pereira International Free Trade Zone, foreign trade platform and recent project implementation, it is important to identify its competitive advantage, so it can develop strategies for entering and staying in the market. In this research, an analysis of the five forces industry free zones was performed, the value chain of the Pereira International Free Trade Zone was defined, finally the factors that influence their competitive advantage was determined.

Changing Patterns of Publication Productivity: Accumulative Advantage or Institutional Isomorphism?

Science.gov (United States)

Dey, Eric L.; Milem, Jeffrey F.; Berger, Joseph B.

1997-01-01

Investigates two competing perspectives, accumulated advantage and institutional isomorphism, on the relationship between publication productivity and institutional hierarchy. Accumulated advantage refers to the continuing attraction of students, faculty, and research dollars to prestige universities. Institutional isomorphism denotes the tendency…

Quantum communication complexity advantage implies violation of a Bell inequality

NARCIS (Netherlands)

H. Buhrman (Harry); L. Czekaj (Lłukasz); A. Grudka (Andrzej); M. Horodecki (Michalł); P. Horodecki (Pawelł); M. Markiewicz (Marcin); F. Speelman (Florian); S. Strelchuk (Sergii)

2015-01-01

htmlabstractWe obtain a general connection between a quantum advantage in communication complexity and non-locality. We show that given any protocol offering a (sufficiently large) quantum advantage in communication complexity, there exists a way of obtaining measurement statistics which violate

Application of Glass Fiber Reinforced Cement in Exhibition Decoration Project

Science.gov (United States)

Wang, Yao

2018-02-01

Through the study of GRC material and its application field, the aesthetic characteristics and functional characteristics of GRC materials are demonstrated. The decorative application and technology of GRC material in an art exhibition center are highlighted. The design, application and construction technology of GRC curtain wall and ceiling board in the interior and exterior decoration of art exhibition hall are discussed in detail. The unique advantages of GRC materials in exhibition engineering decoration are fully reflected. In practical design application, the application principle and method are summarized, and an application procedure is formed. The research proves that GRC materials in the art of building decoration engineering has an underrated advantage.

Lineup composition, suspect position, and the sequential lineup advantage.

Science.gov (United States)

Carlson, Curt A; Gronlund, Scott D; Clark, Steven E

2008-06-01

N. M. Steblay, J. Dysart, S. Fulero, and R. C. L. Lindsay (2001) argued that sequential lineups reduce the likelihood of mistaken eyewitness identification. Experiment 1 replicated the design of R. C. L. Lindsay and G. L. Wells (1985), the first study to show the sequential lineup advantage. However, the innocent suspect was chosen at a lower rate in the simultaneous lineup, and no sequential lineup advantage was found. This led the authors to hypothesize that protection from a sequential lineup might emerge only when an innocent suspect stands out from the other lineup members. In Experiment 2, participants viewed a simultaneous or sequential lineup with either the guilty suspect or 1 of 3 innocent suspects. Lineup fairness was varied to influence the degree to which a suspect stood out. A sequential lineup advantage was found only for the unfair lineups. Additional analyses of suspect position in the sequential lineups showed an increase in the diagnosticity of suspect identifications as the suspect was placed later in the sequential lineup. These results suggest that the sequential lineup advantage is dependent on lineup composition and suspect position. (c) 2008 APA, all rights reserved

The textile and clothing industry in the Danube region countries: Comparative advantages

Directory of Open Access Journals (Sweden)

Ignjatijević Svetlana

2016-01-01

Full Text Available The subject of this study is the analysis of comparative advantages of international export in the TC (textile and clothing industry of the Danube region countries with a special focus on Serbia. The aim of this study is to analyze the comparative advantage and suggest possible economic and legal measures to strengthen export. This study observed export per capita and participation of TC industry export, and measured the comparative advantage and specialization of the Danube region countries in the period between 2005 and 2013. In the course of research, we used the Balassa (RCA and Lafay (LFI indexes of comparative advantage, and the GL index and RUV index of horizontal and vertical specialization in intra-industry exchange. The research has revealed positive comparative advantage in the export of the textile industry in the Czech Republic, Germany and Slovenia. In the clothing industry export, positive comparative advantage was revealed in the cases of: Bulgaria, Hungary, Moldova, Romania, Slovakia and Serbia. The research has shown a positive comparative advantage of the TC industry sector in Serbia. The results of our research into the TC industry reveal the existence of correlation between comparative advantage and intra-industry specialization in international trade.

THE COMPETITIVE ADVANTAGE OF NATIONS AND THE PARTICULARITIES OF ROMANIAN COMPANIES

Directory of Open Access Journals (Sweden)

Alina HAGIU

2013-12-01

Full Text Available The theory of competitive advantage of Michael Porter stated that national competitive advantage is a reflection of a "diamond" which is running properly and efficiently. But if a developing country like Romania does not have the right conditions for effective functioning of the "diamond", what happens? This is the question to which we try to give an answer within this paper. In this respect, the paper aims to analyze the theory of competitive advantage of Michael Porter, followed by an identification of the advantages and criticisms of this theory over time. Finally we make a customization of this theory in the context of the competitive environment in Romania.

The Source of Competitive Advantage and Entrepreneurial Judgment in the RBV

DEFF Research Database (Denmark)

Ishikawa, Ibuki

The purpose of this paper is to identify the source of competitive advantage in the resource based view of strategic management literature. In particular, it is argued that the source of competitive advantage is rooted in entrepreneur judgment. In this argument, this paper consists largely of three...... on Lachmann (1947,1956), Mises (1946) and Knight (1921) to improve the RBV framework; thirdly, to apply the Austrian perspective to the RBV and demonstrate that the source of competitive advantage is derived from entrepreneurial judgment per se, not the resource per se, and to discuss some possible future...... the source of competitive advantage.Jel Code: B25, D21, D81, M13...

Introducing the religio-centric positional advantage to Indonesian small businesses

Directory of Open Access Journals (Sweden)

Hendar Hendar

2017-03-01

Full Text Available With a focus on small religion-based businesses in Indonesia, this research examines whether marketing innovativeness, customers responsiveness and competitors′ responsiveness can improve marketing performance. A conceptual model on the correlation of these three variables with religio-centric positional advantage and marketing performance is examined by using structural equation model. For this purpose 335 small businesses of Islamic Fashion had been studied using purposive sampling from 11 regencies/cities in Central Java (Indonesia. The results showed that (1 small companies in these market segments based on religion is likely to have better marketing performance when they have the Religio-centric positional advantage, (2 The increase in marketing innovativeness, CuR and CoR is required to improve and maintain religio-centric positional advantage, and (3 religio-centric positional advantage is definitely a mediator in the correlation of marketing innovativeness, customer responsiveness and competitors responsiveness with marketing performance.

Advertising Dynamics and Competitive Advantage

OpenAIRE

Ulrich Doraszelski; Sarit Markovich

2004-01-01

Can advertising lead to a sustainable competitive advantage? To answer this question, we propose a dynamic model of advertising competition where firms repeatedly advertise, compete in the product market, and make entry as well as exit decisions. Within this dynamic framework, we study two different models of advertising: In the first model, advertising influences the goodwill consumers extend towards a firm ("goodwill advertising"), whereas in the second model it influences the share of cons...

Advantages of new micro-jet welding technology on weld microstructure control

Directory of Open Access Journals (Sweden)

Jan PIWNIK

2013-01-01

Full Text Available An innovative apparatus to welding process with micro-jet cooling of the weld made it possible to carry out technological tests, which have proved theoretical considerations about this problem. This project gives real opportunities for professional development in the field of welding with controlling the parameters of weld structure. These tests have proved that the new micro-jet technology has the potential for growth. It may be great achievement of welding technology in order to increase weld metal strength. The new technology with micro-jet cooling may have many practical applications in many fields, for example such as in the transport industry or to repair damaged metal elements. The advantages of the new device over the traditional system are the ability to control the structure of the weld, the weld mechanical performance increases and improve the quality of welded joints.

Robustness of the Sequential Lineup Advantage

Science.gov (United States)

Gronlund, Scott D.; Carlson, Curt A.; Dailey, Sarah B.; Goodsell, Charles A.

2009-01-01

A growing movement in the United States and around the world involves promoting the advantages of conducting an eyewitness lineup in a sequential manner. We conducted a large study (N = 2,529) that included 24 comparisons of sequential versus simultaneous lineups. A liberal statistical criterion revealed only 2 significant sequential lineup…

Opto-electronic DNA chip-based integrated card for clinical diagnostics.

Science.gov (United States)

Marchand, Gilles; Broyer, Patrick; Lanet, Véronique; Delattre, Cyril; Foucault, Frédéric; Menou, Lionel; Calvas, Bernard; Roller, Denis; Ginot, Frédéric; Campagnolo, Raymond; Mallard, Frédéric

2008-02-01

Clinical diagnostics is one of the most promising applications for microfluidic lab-on-a-chip or lab-on-card systems. DNA chips, which provide multiparametric data, are privileged tools for genomic analysis. However, automation of molecular biology protocol and use of these DNA chips in fully integrated systems remains a great challenge. Simplicity of chip and/or card/instrument interfaces is amongst the most critical issues to be addressed. Indeed, current detection systems for DNA chip reading are often complex, expensive, bulky and even limited in terms of sensitivity or accuracy. Furthermore, for liquid handling in the lab-on-cards, many devices use complex and bulky systems, either to directly manipulate fluids, or to ensure pneumatic or mechanical control of integrated valves. All these drawbacks prevent or limit the use of DNA-chip-based integrated systems, for point-of-care testing or as a routine diagnostics tool. We present here a DNA-chip-based protocol integration on a plastic card for clinical diagnostics applications including: (1) an opto-electronic DNA-chip, (2) fluid handling using electrically activated embedded pyrotechnic microvalves with closing/opening functions. We demonstrate both fluidic and electric packaging of the optoelectronic DNA chip without major alteration of its electronical and biological functionalities, and fluid control using novel electrically activable pyrotechnic microvalves. Finally, we suggest a complete design of a card dedicated to automation of a complex biological protocol with a fully electrical fluid handling and DNA chip reading.

Rapidly Degradable Pyrotechnic System

Science.gov (United States)

2009-02-01

material system (structural polymer and degradation agent ) for producing a high strength, non-corroding, highly inert, environmentally safe, extended...polymer sites in the active enzyme center differs dramatically between alkyl and aromatic polyesters. More specifically, as the degree of backbone...capped and centrifuged at 3,000 g. This procedure was repeated twice. To the remaining biomass pellet 15 mL of 1 mg/mL solution of N-ethyl-N- nitrosourea

Places and faces: Geographic environment influences the ingroup memory advantage.

Science.gov (United States)

Rule, Nicholas O; Garrett, James V; Ambady, Nalini

2010-03-01

The preferential allocation of attention and memory to the ingroup (the ingroup memory advantage) is one of the most replicated effects in the psychological literature. But little is known about what factors may influence such effects. Here the authors investigated a potential influence: category salience as determined by the perceiver's geographic environment. They did so by studying the ingroup memory advantage in perceptually ambiguous groups for whom perceptual cues do not make group membership immediately salient. Individuals in an environment in which a particular group membership was salient (Mormon and non-Mormon men and women living in Salt Lake City, Utah) showed better memory for faces belonging to their ingroup in an incidental encoding paradigm. Majority group participants in an environment where this group membership was not salient (non-Mormon men and women in the northeastern United States), however, showed no ingroup memory advantage whereas minority group participants (Mormons) in the same environment did. But in the same environment, when differences in group membership were made accessible via an unobtrusive priming task, non-Mormons did show an ingroup memory advantage and Mormons' memory for ingroup members increased. Environmental context cues therefore influence the ingroup memory advantage for categories that are not intrinsically salient.

Strategic objectives and the usage possibility of competitive advantages of the grain crops complex of Chelyabinsk region

Directory of Open Access Journals (Sweden)

Ol'ga Dmitrievna Rubaeva

2011-12-01

Full Text Available This paper reviews the logical scheme of strategy of the grain complex competitive advantages usage. The results of evaluation of financial and economic situation of agricultural enterprises engaged into production of grain are presented. Determination of the level of competitiveness of the agro-grain industry was established on the basis of obtaining an integral point-weighting factor of competitiveness. Evaluation and confirmation of this technique allowed identifying key factors of competitiveness of agricultural enterprises in the grain corns industry. The main conclusion of the study is the following: the use of resource-saving technologies for the cultivation of crops greatly influences the development of competitive advantages. Calculations showed that the application of resource-saving technology increases productivity, reduces labour requirements and the cost of equipment maintenance and repair, fuel costs, improves basic economic indicators of activity: gross revenues from sales is increasing.

Transnasal endoscopy: Technical considerations, advantages and limitations.

Science.gov (United States)

Atar, Mustafa; Kadayifci, Abdurrahman

2014-02-16

Transnasal endoscopy (TNE) is an upper endoscopy method which is performed by the nasal route using a thin endoscope less than 6 mm in diameter. The primary goal of this method is to improve patient tolerance and convenience of the procedure. TNE can be performed without sedation and thus eliminates the risks associated with general anesthesia. In this way, TNE decreases the cost and total duration of endoscopic procedures, while maintaining the image quality of standard caliber endoscopes, providing good results for diagnostic purposes. However, the small working channel of the ultra-thin endoscope used for TNE makes it difficult to use for therapeutic procedures except in certain conditions which require a thinner endoscope. Biopsy is possible with special forceps less than 2 mm in diameter. Recently, TNE has been used for screening endoscopy in Far East Asia, including Japan. In most controlled studies, TNE was found to have better patient tolerance when compared to unsedated endoscopy. Nasal pain is the most significant symptom associated with endoscopic procedures but can be reduced with nasal pretreatment. Despite the potential advantage of TNE, it is not common in Western countries, usually due to a lack of training in the technique and a lack of awareness of its potential advantages. This paper briefly reviews the technical considerations as well as the potential advantages and limitations of TNE with ultra-thin scopes.

Transnasal endoscopy: Technical considerations, advantages and limitations

Science.gov (United States)

Atar, Mustafa; Kadayifci, Abdurrahman

2014-01-01

Transnasal endoscopy (TNE) is an upper endoscopy method which is performed by the nasal route using a thin endoscope less than 6 mm in diameter. The primary goal of this method is to improve patient tolerance and convenience of the procedure. TNE can be performed without sedation and thus eliminates the risks associated with general anesthesia. In this way, TNE decreases the cost and total duration of endoscopic procedures, while maintaining the image quality of standard caliber endoscopes, providing good results for diagnostic purposes. However, the small working channel of the ultra-thin endoscope used for TNE makes it difficult to use for therapeutic procedures except in certain conditions which require a thinner endoscope. Biopsy is possible with special forceps less than 2 mm in diameter. Recently, TNE has been used for screening endoscopy in Far East Asia, including Japan. In most controlled studies, TNE was found to have better patient tolerance when compared to unsedated endoscopy. Nasal pain is the most significant symptom associated with endoscopic procedures but can be reduced with nasal pretreatment. Despite the potential advantage of TNE, it is not common in Western countries, usually due to a lack of training in the technique and a lack of awareness of its potential advantages. This paper briefly reviews the technical considerations as well as the potential advantages and limitations of TNE with ultra-thin scopes. PMID:24567791

Leveraging marketing capabilities into competitive advantage and export performance.

OpenAIRE

Tan, Q.; Sousa, C. M. P.

2015-01-01

Purpose – By using the dynamic capabilities (DC) theory and the theory of competitive advantage, the purpose of this paper is to develop a framework to investigate the role of marketing capabilities on the firm’s export performance. Specifically, this framework depicts the consequences of marketing capabilities and focuses on the relationships among marketing capabilities, competitive advantage, and export performance. Design/methodology/approach – The authors conduct a meta-analysis of ...

Creating Collaborative Advantages Through Coordination of Regional Development Activities

OpenAIRE

Sumpor, Marijana

2006-01-01

Through the increasing importance of networking and use of participatory strategic planning approaches in the regional development practice, it seems that local and regional development theory moves from the concept of competitive advantages towards collaborative advantages. This conceptual move implies a redefinition of inter- and intra-institutional relations of the public and private sector, and therefore, calls for defining new forms of governance. The exploration of the concept of collab...

Measuring Coding Intensity in Medicare Advantage - SUPP.

Data.gov (United States)

U.S. Department of Health & Human Services — In 2004, Medicare implemented a risk-adjustment system that pays Medicare Advantage (MA) plans based on diagnoses reported for their enrollees, giving the plans an...

home advantage in the commonwealth games

African Journals Online (AJOL)

The occurrence of home advantage in sport is generally well doc- umented and has been shown to exist in a ... there are 53 Commonwealth nations, there are at present 71. Commonwealth Games Associations ... market share values for each host nation were analysed relative to the distance travelled by them (in terms of ...

Competitive advantage: an analytical framework based on entrepreneurship

Institute of Scientific and Technical Information of China (English)

LIU Zhibiao

2006-01-01

This article observes and studies the role and effect of entrepreneurship within the theoretical framework of resource-based view(RBV).It advances competitive advantage theory based on entrepreneurship by proving the distinctiveness of entrepreneurship. Distinctive cognition competence of entrepreneurs provides them with personal specific assets,which determines both the competence to explore new business opportunities and the competence to integrate resources for risk activities.The characteristics of such intangible resource as entrepreneurship,such as its distinctiveness,limitedness of competition,and incomplete mobility of factors,are the most important sources of competitive advantage of enterprises in the strategic management theory of RBV.

Non-Pyrotechnic Latch and Release System for Aerospace and Other Applications, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — American remote Vision Company (ARVC) will continue to research and develop a new non-pryotechnic latch and release sytem for use in servicing and flight release...

Magnesium motorcycle applications

International Nuclear Information System (INIS)

Jianyong Cao; Zonghe Zhang; Dongxia Xiang; Jun Wang

2005-01-01

Magnesium, the lightest engineering structural metal, has been comprehensively used in castings of aviation and aerospace, communication and transportation, and IT components. This paper introduced the history, advantages and difficulties of magnesium castings for motorcycle application as well as its application state in China. It also indicated the production situation of magnesium motorcycle components in CQMST and difficulties need to overcome for further development. (orig.)

UO2/sodium thermal interaction experiments at AWRE foulness since January 1972

International Nuclear Information System (INIS)

Darby, K.I.; Pottinger, R.C.; Turner, R.G.; Rees, N.J.M.

With an interaction rig described in an earlier report a number of performance tests were carried out. The unwanted gas content of the pyrotechnic charge has been identified as adsorbed water vapor. Calorimetric firings have confirmed the total theoretical energy release and chemical analyses of the debris showed that the pyrotechnic reaction had burnt to completion: experiments to correlate rate of charge burning with the pressure rise are proceeding. Charges with UO 2 diluent instead of the previously used Al 2 O 3 have been fired under sodium and water producing identical effects. One tries to separate debris from sodium by distillation. Pyrotechnic charges diluted with aluminium or silver were fired in a viewing cell, the design of which is described. A very high gas blanket pressure probably due to vapor pressure effects from the charge were observed. One frictional plate has been used with a negligible effect on measured gas blanket pressure. As a means to limit the first bubble excursion same firings were made with an increased gas blanket pressure

Advantages and Disadvantages of Using MATLAB/ode45 for Solving Differential Equations in Engineering Applications

OpenAIRE

Waleed K. Ahmed

2013-01-01

The present paper demonstrates the route used for solving differential equations for the engineering applications at UAEU. Usually students at the Engineering Requirements Unit (ERU) stage of the Faculty of Engineering at the UAEU must enroll in a course of Differential Equations and Engineering Applications (MATH 2210) as a prerequisite for the subsequent stages of their study. Mainly, one of the objectives of this course is that the students practice MATLAB software package during the cours...

Establishing knowledge management for competitive advantage in an enterprise

OpenAIRE

2012-01-01

M.Inf. Enterprises are becoming more dependent on people than ever before and in the twenty first century, an enterprise's survival and success will highly depend on the ability to manage knowledge as a source for competitive advantage. This study is concerned with the establishment of a knowledge management program that will ensure sustainable competitive advantage within the enterprise. The main problem under investigation is to assess the importance of knowledge management within an ent...

Usage of Human Mesenchymal Stem Cells in Cell-based Therapy: Advantages and Disadvantages.

Science.gov (United States)

Kim, Hee Jung; Park, Jeong-Soo

2017-03-01

The use of human mesenchymal stem cells (hMSCs) in cell-based therapy has attracted extensive interest in the field of regenerative medicine, and it shows applications to numerous incurable diseases. hMSCs show several superior properties for therapeutic use compared to other types of stem cells. Different cell types are discussed in terms of their advantages and disadvantages, with focus on the characteristics of hMSCs. hMSCs can proliferate readily and produce differentiated cells that can substitute for the targeted affected tissue. To maximize the therapeutic effects of hMSCs, a substantial number of these cells are essential, requiring extensive ex vivo cell expansion. However, hMSCs have a limited lifespan in an in vitro culture condition. The senescence of hMSCs is a double-edged sword from the viewpoint of clinical applications. Although their limited cell proliferation potency protects them from malignant transformation after transplantation, senescence can alter various cell functions including proliferation, differentiation, and migration, that are essential for their therapeutic efficacy. Numerous trials to overcome the limited lifespan of mesenchymal stem cells are discussed.

Consumer Insight as Competitive Advantage Using Big Data and Analytics

Directory of Open Access Journals (Sweden)

Adnan Veysel Ertemel

2015-12-01

Full Text Available Digital revolution serves as a competitive advantage to businesses that are able to analyze consumer behavior in order to gain insights for their strategic advantage. After the advent of Internet, the past two decades witnessed generation of vast amount of business data. The amount of data is so huge that traditional database management system approaches falls short of managing and analyzing this data. This paper explores the characteristics of this phenomenon called Big Data together with Analytics as a tool for marketers to gain insights about consumer behavior and hence provide competitive advantage to the businesses. It also discusses some best practices as case studies.

Digital radiography in NDT applications

International Nuclear Information System (INIS)

Deprins, E.

2004-01-01

A lot of film radiography could be replaced by today's technologies in the field of digital radiography. Only few of these applications have indeed replaced film. The choice to go digital depends on cost, quality requirement, workflow and throughput. Digital images offer a lot of advantages in terms of image manipulation and workflow. But despite the many advantages, a lot of considerations are needed before someone can decide to convert his organization from conventional to digital radiography. This paper gives an overview of all different modalities that can be used in digital radiography with today's technologies, together with the experiences of the pioneers of digital radiography. Film Scanning, Computed Radiography and Digital Radiography by using of different kinds of flat panel detectors all have their specific application fields and customers. What is the status of the technology today, which advantages brings digital radiography, and which are the limitations radiographers have to consider when replacing film by digital systems. (author)

ORGANISATIONAL CAPABILITIES, COMPETITIVE ADVANTAGE AND PERFORMANCE IN SUPPORTING INDUSTRIES IN VIETNAM

Directory of Open Access Journals (Sweden)

Nham Phong Tuan

2010-01-01

Full Text Available This paper focuses on applying the resource-based view (RBV of firms to explain performance in supporting industries in Vietnam. Specifically, we based our research on the comprehensive framework of RBV and reviewed previous empirical researches before deciding on adopting a dynamic capabilities approach to test relationships among organisational capabilities, competitive advantage and performance. A multivariate analysis of survey responses of 102 firms belonging to supporting industries in Vietnam indicates that the organisational capabilities are related to the competitive advantage, that the competitive advantage is related to performance, and that the competitive advantage mediates the relationship between organizational capabilities and performance. These findings have considerable implications for academics as well as practitioners. Finally, this study also provides directions for future research.

A Visual Short-Term Memory Advantage for Objects of Expertise

Science.gov (United States)

Curby, Kim M.; Glazek, Kuba; Gauthier, Isabel

2009-01-01

Visual short-term memory (VSTM) is limited, especially for complex objects. Its capacity, however, is greater for faces than for other objects; this advantage may stem from the holistic nature of face processing. If the holistic processing explains this advantage, object expertise--which also relies on holistic processing--should endow experts…

THE COMPETITIVE ADVANTAGE OF NATIONS AND THE PARTICULARITIES OF ROMANIAN COMPANIES

OpenAIRE

Alina HAGIU; Marinela BĂRBULESCU

2013-01-01

The theory of competitive advantage of Michael Porter stated that national competitive advantage is a reflection of a "diamond" which is running properly and efficiently. But if a developing country like Romania does not have the right conditions for effective functioning of the "diamond", what happens? This is the question to which we try to give an answer within this paper. In this respect, the paper aims to analyze the theory of competitive advantage of Michael Porter, followed by...

Distance learning: its advantages and disadvantages

OpenAIRE

KEGEYAN SVETLANA ERIHOVNA

2016-01-01

Distance learning has become popular in higher institutions because of its flexibility and availability to learners and teachers at anytime, regardless of geographic location. With so many definitions and phases of distance education, this paper only focuses on the delivery mode of distance education (the use of information technology), background, and its disadvantages and advantages for today’s learners.

BUSINESS COMPETITORS AND COMPETITIVE ADVANTAGE

Directory of Open Access Journals (Sweden)

SUCIU TITUS

2013-08-01

Full Text Available The paper presents the concept of competition, both from the perspective of the economic sector –where it is characteristic for pure monopole, oligopoly, monopole competition and pure competition, as well asfrom the market’s point of view – where it determines the strategies, objectives, advantages and weaknesses of acompany. The main point of the paper is the criticism of the pure and perfect competition theory. Concluding,the author insists on innovation, especially on the model of open innovation.

Advantages and Challenges of Radiative Liquid Lithium Divertor

Science.gov (United States)

Ono, Masayuki

2017-10-01

Steady-state fusion power plant designs present major divertor technology challenges, including high divertor heat flux both in steady-state and during transients. In addition to these concerns, there are the unresolved technology issues of long term dust accumulation and associated tritium inventory and safety issues. The application of lithium (Li) in NSTX resulted in improved H-mode confinement, H-mode power threshold reduction, and reduction in the divertor peak heat flux while maintaining essentially Li-free core plasma operation even during H-modes. These promising results in NSTX and related modeling calculations motivated the radiative liquid Li divertor (RLLD) concept and its variant, the active liquid Li divertor concept (ARLLD), taking advantage of the enhanced Li radiation in relatively poorly confined divertor plasmas. It has been suggested that radiation-based liquid lithium (LL) divertor concepts with a modest Li-loop could provide a possible solution for the outstanding fusion reactor technology issues such as divertor heat flux mitigation and real time dust removal, while potentially improving the reactor plasma performance. Laboratory tests are also planned to investigate the Li-T recover efficiency and other relevant research topics of the RLLD. This work supported by DoE Contract No. DE-AC02-09CH11466.

RECONSIDERING COMPETITIVE ADVANTAGES

Directory of Open Access Journals (Sweden)

Valentina Zaharia

2011-12-01

Full Text Available Development of the competitive advantage involves a considerable effort from any organization. In particular, those organizations involved in a strong competitive market require the development of strategies to allocate long-term strategic marketing resources, efficiently and with easily quantifiable results. Faced with a multitude of phenomena and processes sometimes contradictory on different markets of consumption, contemporarily marketing has the mission to develop as creative as possible the business strategy of the organizations, their capacity of interacting with customers and other categories of audience. Such concepts as strategic positioning, relational marketing, management of the relationship with the consumer, marketing integrated research, a.s.o. are only a few of the tools with the help of which the marketing managers will implement successful operational strategies. All these developments are creating a real new paradigm of Marketing aimed to better explain the new types of complex market relationship in which the 21st Century organization is .

The relation between proactive environmental strategies and competitive advantage

Science.gov (United States)

Butnariu, A.; Avasilcăi, S.

2015-11-01

There are two distinct orientations of the environmental management that companies may adopt: the model of compliance and the strategic model. The strategic model treats environmental expenses as investments that will lead to competitive advantage for the company. Nevertheless, there are few scientific works that prove the relation between corporate environmental investments and competitive advantage. Thereby, in order to bring clarifications about the profound implications of environmental investments, in the first stage of our research we have proposed the hypothesis that the environmental investments would probably lead to competitive advantage by creating capabilities that are mediators of this relation. In the second stage we have tested this hypothesis, using the research method of survey. A questionnaire was sent to managers in textile Romanian industry, and 109 answers were received. The data was analysed using the linear multiple regression method and the results confirm our hypothesis.

Industrial applications of nuclear techniques in Poland

International Nuclear Information System (INIS)

Michalik, J.St.

1981-01-01

Application of radioisotope techniques in a number of Polish industries was reviewed. Studies on the usage of radiotracer as an evaluation method for technological processes were carried out and the advantages of such application were discussed

ADVANTAGES AND DISADVANTAGES OF THE SONICFILL™ METHOD FOR LATERAL FILLINGS

Directory of Open Access Journals (Sweden)

Nicolae BARANOV

2017-06-01

Full Text Available The aim of the study was to evaluate the advantages and disadvantages of bulk-fill type fillings realized with SONICFill™ over an 18 month interval, on a batch of patients with different ages and occupations. Materials and methods: the study was performed on a batch of 73 patients who addressed the Clinical of OdontologyEndodontics within the Platform of Practical Training (PIP of the Faculty of Dental Medicine of the ”Apollonia” University of Iaşi, between Octomber 1, 2014 - May 1, 2016, subjected to 91 bulk-fill fillings with SonicFill™ on the posterior teeth. Results and discussion: out of the total number of 73 patients, 56 came from the urban environment, and 17 - from the rural medium, the highest ratio being represented by the 21-30 year age group (45%, closely followed by the 31-40 year one (40%. As for gender distribution within the batch, nearly two-thirds are women, the rest being men. The education level influenced patients’ decision – that of accepting a new method of filling application. As to the types of teeth to which restorations were applied, the highest ratio is represented by lower molars (41%, followed by upper molars (23% and mandibular premolars (20%, the lowest number of restorations being applied to maxillary premolars. Out of the total number of 91 bulk-fill restorations, 28 were applied over a base filling while, in 63 restorations, the basic filling was absent. Conclusions: The SonicFill ™ system for bulk-fill posterior restorations has a number of advantages, such as: high photopolymerization depth, significant reduction of setting contraction, better composite adaptation to the cavity walls, long-term predictable clinical results.

Home Field Advantage Calculation for Physical Education and Sport Students

Science.gov (United States)

Inan, Tugbay

2018-01-01

It is a well-established fact that playing at home field is an advantageous condition for professional sport teams. For this reason, the home field advantage in team sports is an important issue to be explored. It is also one of the different topics that physical education and sports students can use when they want to perform performance analysis…

Shared, competitive, and comparative advantages: a competence-based view of industrial-district competitiveness

OpenAIRE

César Camisón

2004-01-01

The author's aim is to construct and validate empirically a theoretical model that allows performance and competitiveness in firms located in industrial districts to be explained. From the strategic perspective adopted, economic revenues are explained by three types of advantage: shared advantages, competitive advantages, and comparative advantages. Neither integration in the district, nor its attraction due to the shared competences within it, are significant predictors of performance. Empir...

[Overdenture supported by natural teeth: analysis of clinical advantages].

Science.gov (United States)

Scotti, R; Melilli, D; Pizzo, G

2003-05-01

Hybrid prosthesis supported by natural teeth (overdenture) is widely used in clinical practice and should be executed whenever the clinical conditions suggest it. Through a critical review of the literature, the anatomical, functional, psychological and clinical advantages are emphasized. Among the first ones, the prophylaxis of residual anatomical components, due to the limitation of bone resorption, and the preservation of sensorial proprioception are relevant. Important advantages are also represented by a better crown-root ratio of residual teeth supporting overdenture, with the consequent improvement of the longitudinal prognosis of such teeth. The greater retention and stability of overdenture in comparison with complete denture greatly improve the masticatory efficacy. The psychological advantages resulting from the dental anchorage, which allows the patient to be more confident in social life, are also relevant. Finally, when the dental support is lost, converting overdenture into complete denture is simple and quick, and makes easier the longitudinal clinical maintenance of the denture.

REST based mobile applications

Science.gov (United States)

Rambow, Mark; Preuss, Thomas; Berdux, Jörg; Conrad, Marc

2008-02-01

Simplicity is the major advantage of REST based webservices. Whereas SOAP is widespread in complex, security sensitive business-to-business aplications, REST is widely used for mashups and end-user centric applicatons. In that context we give an overview of REST and compare it to SOAP. Furthermore we apply the GeoDrawing application as an example for REST based mobile applications and emphasize on pros and cons for the use of REST in mobile application scenarios.

Creating Competitive Advantage through Effective Management Education.

Science.gov (United States)

Longenecker, Clinton O.; Ariss, Sonny S.

2002-01-01

Managers trained in executive education programs (n=203) identified ways in which management education can increase an organization's competitive advantage: exposure to new ideas and practices, skill development, and motivation. Characteristics of effective management education included experience-based learning orientation, credible instructors,…

GLOBAL COMPETITION AND ROMANIA’S NATIONAL COMPETITIVE ADVANTAGE

Directory of Open Access Journals (Sweden)

Pop Nicolae Alexandru

2013-07-01

Full Text Available Analyzing products and services around us it is clear that most of them are the result of production factors, labor and capital becoming more international and increasingly less and less national. We are witnessing the globalization of markets and production, to a large global integration and interdependence, increase personalization of production and services as a result of new communication systems interaction and flexible production processes. Markets will continue to homogenize and diversify at the same time, so it is important that as a global marketer one addresses a market segment defined by income, age, and consumption habits and not by membership of a nation. The most visible and polarized is the premium segment fighting for high income clients where brand value plays an important role. Instead identification of large segments of customers offers the advantages of scale economy in production and marketing for global enterprises. Consumer profile is the dominant global consumer requesting and accepting global products and services easily. In fact, what can force an economic alignment to achieve the best performance, rather than the global consumer. The research methodology used includes literature review, comparative analysis, synthesis of data based on bibliographic resources and official documents.The aim of the paper is to highlight current models that underlie the competitive advantage of nations and assess the competitive advantage of Romania in the context of the global market. A case study is used to offer an overview of competitive advantage of Antibiotice Iasi SA, a competitive player, in a global pharmaceutical market with strong global competition. Countries moderate companies’ achievements of global efficiency objectives due to the countries’ rivalry. Romania has to understand that it is in competition with other countries in order to fulfill economic, political and social objectives. The scope in the end is the well

Revealed Comparative Advantage of Services in Cariforum Countries

Directory of Open Access Journals (Sweden)

Marie Freckleton

2014-09-01

Full Text Available A pesar de la importancia de las exportaciones de servicios a los países del CARIFORUM no hay muchos estudios sobre de la competitividad de las exportaciones. Este artículo examina la ventaja comparativa revelada de las exportaciones de servicios de los países del CARIFORUM. El análisis muestra que la mayoría de los países del CARIFORUM han puesto de manifiesto las ventajas comparativas en el turismo, pero también hay casos de ventaja comparativa revelada en otros servicios como transporte, seguros y servicios empresariales, servicios personales, culturales y recreativos. Los resultados sugieren que existe un potencial de CARIFORUM para diversificar las exportaciones de servicios con el fin de pro-mover el crecimiento económico y reducir la vulnerabilidad. Sin embargo, en la medida en que los países del CARIFORUM pueden tomar ventaja de las oportunidades existentes de acceso al Mercado de los servicios depende de su capacidad de mejorar la capacidad de oferta de servicios y promover la competitividad de los servicios. English: Despite the importance of services ex-ports to CARIFORUM countries there is limited research on the competitiveness of such exports. This article examines the revealed comparative advantage of services exports in CARIFORUM countries. The analysis shows that most CARIFORUM countries have revealed comparative advantage in tourism but there are also cases of revealed comparative advantage in other services including transport, insurance, business services and personal, cultural and recreational services. The results suggest that there is potential for CARIFORUM to diversify exports of services in order to promote economic growth and reduce vulnerability. However, the extent to which CARIFORUM countries can take advantage of existing market access opportunities for services depends on their ability to improve the capacity to supply services and to promote the competitiveness of services.

Sustainable competitive advantage for accountable care organizations.

Science.gov (United States)

Macfarlane, Michael Alex

2014-01-01

In the current period of health industry reform, accountable care organizations (ACOs) have emerged as a new model for the delivery of high-quality and cost-effective healthcare. However, few ACOs operate in direct competition with one another, and the accountable care business model has yet to present a means of continually developing new marginal value for patients and network partners. With value-based purchasing and patient consumerism strengthening as market forces, ACOs must build organizational sustainability and competitive advantage to meet the value demands set by customers and competitors. This essay proposes a strategy, adapted from the disciplines of agile software development and Lean product development, through which ACOs can engage internal and external customers in the development of new products that will provide sustainability and competitive advantage to the organization by decreasing waste in development, promoting specialized knowledge, and closely targeting customer value.

Excimer laser applications

International Nuclear Information System (INIS)

Fantoni, R.

1988-01-01

This lecture deals with laser induced material photoprocessing, especially concerning those processes which are initiated by u.v. lasers (mostly excimer laser). Advantages of using the u.v. radiation emitted by excimer lasers, both in photophysical and photochemical processes of different materials, are discussed in detail. Applications concerning microelectronics are stressed with respect to other applications in different fields (organic chemistry, medicine). As further applications of excimer lasers, main spectroscopic techniques for ''on line'' diagnostics which employ excimer pumped dye lasers, emitting tunable radiation in the visible and near u.v. are reviewed

Advantages of neutron scattering for biological structure analysis

International Nuclear Information System (INIS)

Schoenborn, B.P.

1975-01-01

The advantages and disadvantages of neutron scattering for protein crystallography, scattering from oriented systems, and solution scattering are summarized. Techniques for minimizing the disadvantages are indicated

Bayesian inference for psychology. Part I : Theoretical advantages and practical ramifications

NARCIS (Netherlands)

Wagenmakers, E.-J.; Marsman, M.; Jamil, T.; Ly, A.; Verhagen, J.; Love, J.; Selker, R.; Gronau, Q.F.; Šmíra, M.; Epskamp, S.; Matzke, D.; Rouder, J.N.; Morey, R.D.

2018-01-01

Bayesian parameter estimation and Bayesian hypothesis testing present attractive alternatives to classical inference using confidence intervals and p values. In part I of this series we outline ten prominent advantages of the Bayesian approach. Many of these advantages translate to concrete

Advantages of super-light structures

DEFF Research Database (Denmark)

Hertz, Kristian Dahl

2009-01-01

Super-light structures with pearl-chain reinforcement is a new revolutionary technology that opens possibilities of building load-bearing structures much cheaper and with several other advantages compared to traditional constructions of concrete and steel. Some benefits are: 1 Half price or less. 2...... Architectural expressions never seen before. 3 Material savings of more than 50 %. 4 Energy and CO2 savings of more than 50 %. 5 No Scaffolding and cheaper moulds. 6 Improved durability. 7 Extreme thermal insulation. 8 Better indoor-climate. 9 User friendly operation and maintenance. 10 Increased safety...

Advantages of polarization experiments at RHIC

International Nuclear Information System (INIS)

Underwood, D.G.

1991-01-01

We point out various spin experiments that could be done if the polarized beam option is pursued at RHIC. The advantages of RHIC for investigating several current and future physics problems are discussed. In particular, the gluon spin dependent structure function of the nucleon could be measured cleanly and systematically. Relevant experience developed in conjunction with the Fermilab Polarized Beam program is also presented

Advantages of the production contractor concept

Energy Technology Data Exchange (ETDEWEB)

Gisvold, K.M. [Golar-Nor Offshore, Trondheim (Norway)

1994-12-31

This paper presents some thoughts on the Production Contractor concept. It starts with an attempt to define the prerequisites for such contractorship to exist and develop, going on to examine the considerations that the oil company and the contractor respectively have to go through, and finally trying to summarize what emerges as the advantages of production contracting. Examples are given to emphasize particular points

Advantages of the production contractor concept

International Nuclear Information System (INIS)

Gisvold, K.M.

1994-01-01

This paper presents some thoughts on the Production Contractor concept. It starts with an attempt to define the prerequisites for such contractorship to exist and develop, going on to examine the considerations that the oil company and the contractor respectively have to go through, and finally trying to summarize what emerges as the advantages of production contracting. Examples are given to emphasize particular points

Finance, Comparative Advantage, and Resource Allocation

OpenAIRE

Jaud, Melise; Kukenova, Madina; Strieborny, Martin

2013-01-01

The authors show that exported products exit the US market sooner if they violate the Heckscher-Ohlin notion of comparative advantage. Crucially, this pattern is stronger when exporting country has a well-developed banking system, measured by a high ratio of bank credit over the GDP. Banks thus push firms away from exports that are facing an uphill battle on a competitive foreign market du...

Interest alignment rents and competitive advantage

OpenAIRE

M. ZOLLO; O. GOTTSCHALG

2007-01-01

This paper articulates a theory of the conditions under which the alignment between individual and collective interests generates sustainable competitive advantage. The theory is based on the influence of tacitness, context specificity, and causal ambiguity in the determinants of different types of motivation (extrinsic, normative intrinsic, and hedonic instinsic) under varying conditions of environmental dynamism. The analysis indicates the need to consider motivational processes as a comple...

Implementation of marketing strategy: Factor of competitive advantage

Directory of Open Access Journals (Sweden)

Krstić Ivan

2011-01-01

Full Text Available Primary objective of the company is to reach the business success. Competitors have the same objective. Only the companies that really meet the consumer's needs and demands survive in the competitive struggle. The company who succeeds in it, has the possibility to achieve the competitive advantage as well. The company has to have the adequate marketing strategy in order to fulfill the marketing objectives and achieve the competitive advantage. The marketing strategy should be flexible and properly implemented to fulfill the expected results. The best solution is developing the credible strategies. Researching of the strategic marketing literature, the authors have noted down that the greater attention is given to the formulation than the implementation of the marketing strategy. In this text, focus is on the research of the marketing strategy implementation as a significant factor of the competitive advantage. The traditional concept of the marketing strategy implementation is taken into consideration first, as well as the risks the enterprise is facing with in that case. Thereafter, the testing and developing of the credible marketing strategy is represented, as well as the problems the enterprise is facing with in the implementation. Finally, the executive skills and control are analyzed as important factors of the successful implementation of the marketing strategy. .

Operational-safety advantages of LMFBR's: the EBR-II experience and testing program

International Nuclear Information System (INIS)

Sackett, J.I.; Lindsay, R.W.; Golden, G.H.

1982-01-01

LMFBR's contain many inherent characteristics that simplify control and improve operating safety and reliability. The EBR-II design is such that good advantage was taken of these characteristics, resulting in a vary favorable operating history and allowing for a program of off-normal testing to further demonstrate the safe response of LMFBR's to upsets. The experience already gained, and that expected from the future testing program, will contribute to further development of design and safety criteria for LMFBR's. Inherently safe characteristics are emphasized and include natural convective flow for decay heat removal, minimal need for emergency power and a large negative reactivity feedback coefficient. These characteristics at EBR-II allow for ready application of computer diagnosis and control to demonstrate their effectiveness in response to simulated plant accidents. This latter testing objective is an important part in improvements in the man-machine interface

THE MANAGEMENT OF PERFORMANCE IN THE EVALUATION OF THE DIDACTIC STAFF: ADVANTAGES AND RISKS

Directory of Open Access Journals (Sweden)

Victoria GHEORGHE

2015-11-01

Full Text Available The legitimacy of stating certain performance standards regarding the didactic profession has found its pros and cons among teachers. This article points out a part of the risks of paying the teachers according to their results. Its purpose is actually that of debating the advantages and risks that the application of such measure presupposes as well as that of pleading for the recognition of the subjective, human, unstandardized component of the didactic expertise. The paying of the teachers according to their performance results should not only be regarded as an economical problem of allothing investments but also as a political issue of real importance for the education of youth.

A microbial model of economic trading and comparative advantage.

Science.gov (United States)

Enyeart, Peter J; Simpson, Zachary B; Ellington, Andrew D

2015-01-07

The economic theory of comparative advantage postulates that beneficial trading relationships can be arrived at by two self-interested entities producing the same goods as long as they have opposing relative efficiencies in producing those goods. The theory predicts that upon entering trade, in order to maximize consumption both entities will specialize in producing the good they can produce at higher efficiency, that the weaker entity will specialize more completely than the stronger entity, and that both will be able to consume more goods as a result of trade than either would be able to alone. We extend this theory to the realm of unicellular organisms by developing mathematical models of genetic circuits that allow trading of a common good (specifically, signaling molecules) required for growth in bacteria in order to demonstrate comparative advantage interactions. In Conception 1, the experimenter controls production rates via exogenous inducers, allowing exploration of the parameter space of specialization. In Conception 2, the circuits self-regulate via feedback mechanisms. Our models indicate that these genetic circuits can demonstrate comparative advantage, and that cooperation in such a manner is particularly favored under stringent external conditions and when the cost of production is not overly high. Further work could involve implementing the models in living bacteria and searching for naturally occurring cooperative relationships between bacteria that conform to the principles of comparative advantage. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Platelet Function Tests: Preanalytical Variables, Clinical Utility, Advantages, and Disadvantages.

Science.gov (United States)

Hvas, Anne-Mette; Grove, Erik Lerkevang

2017-01-01

Platelet function tests are mainly used in the diagnostic work-up of platelet disorders. During the last decade, the additional use of platelet function tests to evaluate the effect of antiplatelet therapy has also emerged in an attempt to identify patients with an increased risk of arterial thrombosis. Furthermore, platelet function tests are increasingly used to measure residual effect of antiplatelet therapy prior to surgery with the aim of reducing the risk of bleeding. To a limited extend, platelet function tests are also used to evaluate hyperaggregability as a potential marker of a prothrombotic state outside the setting of antiplatelet therapy. This multifaceted use of platelet function tests and the development of simpler point-of-care tests with narrower application have increased the use of platelet function testing and also facilitated the use of platelet function tests outside the highly specialized laboratories. The present chapter describes the preanalytical variables, which should be taken into account when planning platelet function testing. Also, the most widely used platelet function tests are introduced, and their clinical utility and their relative advantages and disadvantages are discussed.

Advantages of the non-stationary approach: test on eddy current signals

International Nuclear Information System (INIS)

Brunel, P.

1993-12-01

Conventional signal processing is often unsuitable for the interpretation of intrinsically non-stationary signals, such as surveillance or non destructive testing signals. In these cases, ''advanced'' methods are required. This report presents two applications of non-stationary signal processing methods to the complex signals obtained in eddy current non destructive testing of steam generator tubes. The first application consists in segmenting the absolute channel, which can be likened to a piecewise constant signal. The Page-Hinkley cumulative sum algorithm is used, enabling detection of unknown mean amplitude jumps in a piecewise constant signal disturbed by a white noise. Results are comparable to those obtained with the empirical method currently in use. As easy to implement as the latter, the Page-Hinkley algorithm has the added advantage of being well formalized and of identifying whether the jumps in mean are positive or negative. The second application concerns assistance in detecting characteristic fault transients in the differential channels, using the continuous wavelet transform. The useful signal and noise spectra are fairly close, but not strictly identical. With the continuous wavelet transform, these frequency differences can be turned to account. The method was tested on synthetic signals obtained by summing noise and real defect signals. Using the continuous wavelet transform reduces the minimum signal-to-noise ratio by 5 dB for detection of a transient as compared with direct detection on the original signal. Finally, a summary of non-stationary methods using our data is presented. The two investigations described confirm that non-stationary methods may be considered as interesting signal and image analysis tools, as an efficient complement to conventional methods. (author). 24 figs., 13 refs

Applications of electron linacs to ADS: one potential path forward

International Nuclear Information System (INIS)

Wells, D.P.; Harmon, J.F.

2011-01-01

The application of electron linac accelerators to ADS systems offers a number of advantages for ADS applications. We propose a path forward with electron linac-driven ADS that takes advantage of those important ADS applications that are most easily achieved at relatively low cost, and then building on those successes to enable the more difficult applications with larger impact. We argue that the applications that are most easily achieved are medical isotope production, materials irradiation and environmental applications. The accelerator and target demands for each of these applications are essentially the same as for the ADS needs in energy production and the transmutation of waste. The successful demonstration of these important and highly-visible applications will, in turn, lead to greater visibility and funding to further major advances of ADS systems in energy production, nuclear waste transmutation, and applications to the thorium fuel cycle. (author)

Which competitive advantages can firms really obtain from ISO14001 certification?

Directory of Open Access Journals (Sweden)

Josefina Lucia Murillo-Luna

2008-12-01

Full Text Available Ten years after the introduction of ISO14001, in this paper we present empirical evidence about the competitive advantages that managers associate to this environmental practice, from a sample of industrial firms located in Spain. The results indicate that the potential competitive advantages are: improvement of the internal efficiency, differentiation advantages, attention to the stakeholders’ requirements, enhancement of the competitive position in the sector and financial savings. Nevertheless managers’ expectations of improving internal efficiency might be the real reason that encourages firms to make the voluntary decision of investing in ISO14001 certification.

Overview of research in the ADVANTAGE project

DEFF Research Database (Denmark)

Angjelichinoski, Marko; Cosovic, Mirsad; Kalalas, Charalampos

2016-01-01

The European Marie Curie Project ADVANTAGE (Advanced Communications and Information processing in smart grid systems) was launched in 2014. It represents a major inter-disciplinary research project into the topic of Smart Grid technology. A key aspect of the project is to bring together and train...

Advantages and disadvantages by using safety culture

DEFF Research Database (Denmark)

Dyhrberg, Mette Bang

2003-01-01

Safety culture is a major issue in accident research. A recently finished ph.d.-study has evaluated the symbolic safety culture approach and found four advantages and two disadvantages. These are presented and discussed in this contribution. It is concluded that the approach can be useful...

Canonical Correlation Analysis Between Supply Chain Quality Management And Competitive Advantages

Directory of Open Access Journals (Sweden)

Chaghooshi Ahmad Jafarnejad

2015-06-01

Full Text Available Competitive environment of today’s organizations, more than ever, is extensive, and the major concern for managers is to preserve and promote the sustainable competitive advantage. Companies have an obligation to improve their product quality and have extensive and close cooperation with other companies involved in the supply chain of products. Supply chain quality management (SCQM is a systematic approach to improve the performance that integrates supply chain partners and uses the opportunity in the best way, establish linkages between upstream and downstream flows, and investigate on creating value and satisfaction of intermediaries and final customers. Furthermore, achieving competitive advantages enables an organization to create a remarkable position in market and differentiate itself from competitors. This paper aims to understand the relationships between SCQM and competitive advantage. Sixty-eight experts of 25 companies in Sahami Alyaf (SA supply chain has been participated in this research. The research method used for this article is descriptive correlation. To assess the relationships between the criteria, canonical correlation analysis was used. The result shows that the SCQM and competitive advantages have a meaningful relationship. It also shows that most important variable in the linear combination of SCQM and competitive advantages are “customer focus and quality,” respectively.

Advantages of digital imaging for radiological diagnostic

International Nuclear Information System (INIS)

Trapero, M. A.; Gonzalez, S.; Albillos, J. C.; Martel, J.; Rebollo, M.

2006-01-01

The advantages and limitations of radiological digital images in comparison with analogic ones are analyzed. We discuss three main topics: acquisition, post-procedure manipulation, and visualization, archive and communication. Digital acquisition with computed radiology systems present a global sensitivity very close to conventional film for diagnostic purposes. However, flat panel digital systems seems to achieve some advantages in particular clinical situations. A critical issue is the radiation dose-reduction that can be accomplished without reducing image quality nor diagnostic exactitude. The post-procedure manipulation allows, particularly in multiplanar modalities like CT or MR, to extract all implicit diagnostic information in the images: Main procedures are multiplanar and three-dimensional reformations, dynamic acquisitions, functional studies and image fusion. The use of PACS for visualization, archive and communication of images, improves the effectiveness and the efficiency of the workflow, allows a more comfortable diagnosis for the radiologist and gives way to improvements in the communication of images, allowing tele consulting and the tele radiology. (Author) 6 refs

Advantages for EDF of using and updating PSAs for the probabilistic analysis of accident scenarios in nuclear power plants

International Nuclear Information System (INIS)

Feuillade, Gilles

2000-01-01

This paper shows the advantages for EDF of using and updating PSA models of PWR units for the probabilistic assessment of accident scenarios. These advantages may be classified in various categories: The construction of PSA models makes it possible to aggregate knowledge in a variety of fields: thermohydraulics, the behavior of equipment and systems, organization, plant operation, etc. The updating of PSA models makes it possible to monitor the state of progress of PWR unit safety levels and also allows a variety of applications to be used throughout the service life of the unit. The results obtained are directly applicable to the units as the 'reference PSA models' developed by EDF conform to the units in service. The use of PSA for the examination of incident or accident scenarios makes it possible to verify the adequacy of the resources both in terms of 'systems' and 'plant operation'. These two notions are to be taken in the broadest sense, as they cover the aspects of system design, reliability and availability of equipment, organization of plant operation, comprehensiveness of operating procedures, human redundancy, etc. The use of PSA models through the different applications (analyses of predominant sequences, analyses of main equipment failures, analyses main operator actions, analyses according to the power units, etc) is becoming an indispensable supplement to conventional deterministic analyses of the envisaged accident scenarios. Within the scope of accident prevention, it constitutes a tool to assist the decision-maker, especially when evaluating the pertinence of the General Operating Rules (operating procedures, operating technical specifications, periodic testing, etc). (S.Y.)

FORMATION OF COMPETITIVE ADVANTAGES OF ENTERPRISES IN TERMS OF GLOBALIZATION: COMPETITIVE DYNAMICS AND AN INTELLECTUAL COMPONENT

Directory of Open Access Journals (Sweden)

Oleg Tarasenko

2017-12-01

Full Text Available The purpose of the article is to investigate the current state of scientific thought in relation to the formation of intellectual capital of an enterprise in the innovation process, achievement by the enterprise of corresponding competitive advantages and their protection. Methodology. The methodological basis of the article is the systematic approach, which provided a comprehensive definition of the scope of this research – intellectual property and its protection as a complex economic and legal category. This made it possible to systematically define the purpose, level of abstraction, hierarchy, forms of manifestation, and key attributes of the subject of research. Application of principles of modelling of business processes also allowed studying the influence of factors of the external environment on the sequence of information flows in the process of forming competitive advantages on the basis of intellectual property. In addition, having determined the scientific basis, the collective and local monographic studies of leading scientists concerning the specificity of the formation of competitive advantages of innovative enterprises, including on the basis of intellectual capital, were also taken into account. Results. The article studies, describes and, correspondingly, formalizes modern processes of formation of competitive advantages in the conditions of Smart Economy: knowledge management, their patenting, modern significance, and the influence of patenting on the role of intellectual property in the investigated phenomena, as well as management of relevant information flows. Practical implications. The research demonstrates ways of forming competitive advantages in the modern economy, and the results of the analysis of relevant statistics explain patterns of economic and legal processes in the field of relevant practical activities. This allows assessing the actual state of the subject of the research, determining the development

The Advantages and Disadvantages of Outsourcing

Institute of Scientific and Technical Information of China (English)

无

2007-01-01

Nowadays, the increasing globalization and internationalization bring huge changes to business environment, which has been changed from a lot of dispersed local markets to a single economic market. These changes make businessmen have to think about their international business strategies, such as outsourcing. This article will analyze the advantages and disadvantages of outsourcing in the context of global manufacturing strategy in order to help managers handle it more effectively.

Advantages of polarization experiments at RHIC

International Nuclear Information System (INIS)

Underwood, D.G.

1990-01-01

We point out various spin experiments that could be done if the polarized beam option is pursued at RHIC. The advantages of RHIC for investigating several current and future physics problems are discussed. In particular, the gluon spin dependent structure function of the nucleon could be measured cleanly and systematically. Relevant experience developed in conjunction with the Fermilab Polarized Beam program is also presented. 8 refs., 2 tabs

Economic Development and "National Competitive Advantage"

OpenAIRE

J.T., Goode

2002-01-01

Despite the preponderance of economic theory and research which argues to the contrary, the notion that national economies stand in a fundamentally competitive relationship with one another remains surprisingly widespread. In recent years, some of the most influential impetus for this misperception has come from Michael Porter's conceptualization of "the competitive advantage of nations" in relation to economic development and date theory. It is argued that Porter neither proposes nor demonst...

Dissociation between recognition and detection advantage for facial expressions: a meta-analysis.

Science.gov (United States)

Nummenmaa, Lauri; Calvo, Manuel G

2015-04-01

Happy facial expressions are recognized faster and more accurately than other expressions in categorization tasks, whereas detection in visual search tasks is widely believed to be faster for angry than happy faces. We used meta-analytic techniques for resolving this categorization versus detection advantage discrepancy for positive versus negative facial expressions. Effect sizes were computed on the basis of the r statistic for a total of 34 recognition studies with 3,561 participants and 37 visual search studies with 2,455 participants, yielding a total of 41 effect sizes for recognition accuracy, 25 for recognition speed, and 125 for visual search speed. Random effects meta-analysis was conducted to estimate effect sizes at population level. For recognition tasks, an advantage in recognition accuracy and speed for happy expressions was found for all stimulus types. In contrast, for visual search tasks, moderator analysis revealed that a happy face detection advantage was restricted to photographic faces, whereas a clear angry face advantage was found for schematic and "smiley" faces. Robust detection advantage for nonhappy faces was observed even when stimulus emotionality was distorted by inversion or rearrangement of the facial features, suggesting that visual features primarily drive the search. We conclude that the recognition advantage for happy faces is a genuine phenomenon related to processing of facial expression category and affective valence. In contrast, detection advantages toward either happy (photographic stimuli) or nonhappy (schematic) faces is contingent on visual stimulus features rather than facial expression, and may not involve categorical or affective processing. (c) 2015 APA, all rights reserved).

Applications of soft x-ray lasers

International Nuclear Information System (INIS)

Skinner, C.H.

1993-01-01

The high brightness and short pulse duration of soft x-ray lasers provide unique advantages for novel applications. Imaging of biological specimens using x-ray lasers has been demonstrated by several groups. Other applications to fields such as chemistry, material science, plasma diagnostics, and lithography are beginning to emerge. We review the current status of soft x-ray lasers from the perspective of applications, and present an overview of the applications currently being developed

Targeted deletion of hepatocyte Ikkβ confers growth advantages

International Nuclear Information System (INIS)

Koch, Katherine S.; Maeda, Shin; He, Guobin; Karin, Michael; Leffert, Hyam L.

2009-01-01

Mice lacking hepatocyte IKKβ (Ikkβ Δhep ) are defective in TNFα-activation of hepatocellular transcription factor NF-κB, and highly susceptible to hepatotoxicity. Following diethylnitrosamine (DEN) exposure, Ikkβ Δhep mice develop more hepatocellular carcinoma (HCC) than control mice due partly to enhanced DEN-induced hepatocyte death. Here we show that Ikkβ Δhep hepatocytes display growth advantages over normal hepatocytes consisting of precocious PCNA and cyclin D1 expression during liver regeneration (shortened hepatocyte G 0 → G 1 transitions), and enhanced recovery efficiency, cyclin D1 expression and cell proliferation after plating. Ex vivo deletion of Ikkβ also accelerates hepatocyte growth. Ikkβ Δhep hepatocyte proliferative responses show heightened sensitivity to TGFα and TNFα, and heightened expression of fibronectin, collagens I/III, nidogen, β-actin and integrin β1 mRNAs. These findings suggest that altered mitogen signaling and expression of extracellular matrix and its associated components underlie growth advantages. Increased HCC development in Ikkβ Δhep mice may also be caused by growth advantages of surviving Ikkβ-deleted hepatocytes.

Advantages and disadvantages of franchising as a form of business

OpenAIRE

Kolesova, A. A.

2015-01-01

The article describes the features of the development of franchising in Russia. Franchising has a number of advantages and it is a perspective form of interaction between small and large businesses. However, in taking a decision to contract with the franchise network, in addition to understanding the forms of doing business, the advantages of the system, you should also take into account that the franchise system is associated with some risks.

Explaining foreign ownership by comparative and competitive advantage. Empirical evidence.

OpenAIRE

Bellak, Christian

1999-01-01

This paper provides empirical evidence on the determinants of foreign ownership in manufacturing industries. Foreign ownership, according to the theory of international production, is the result of the combination of comparative and competitive advantage. An adequate examination of the ownership structure of an industry requires the ability to establish empirically the extent to which international competitiveness of firms rests on comparative and competitive advantage. Analysis is based on a...

77 FR 67433 - Community Advantage Pilot Program

Science.gov (United States)

2012-11-09

... comments. SUMMARY: The Community Advantage (``CA'') Pilot Program is a pilot program to increase SBA... small businesses and entrepreneurs in underserved markets, SBA is issuing this Notice to extend the term... Pilot Program was introduced to increase the number of SBA-guaranteed loans made to small businesses in...

生物可吸收支架的利弊之争%Advantages and disadvantages of bioresorbabel scaffold

Institute of Scientific and Technical Information of China (English)

沈雳; 葛均波

2017-01-01

近期，由于美国FDA批准了首个完全生物可降解支架及TCT2016会议上公布了ABSORB II3年的随访结果，关于生物可吸收支架的利弊之争已成为介入心脏病界讨论的热点。本文主要从生物可吸收支架的优势及不足之处进行总结。%Recently,FDA has approved the first bioresorbable scaffold for treatment of coronary artery disease .The leading in-vestigator has also presented the 3-year follow-up results of ABSORB II application at TCT 2016.It has become the hottest topic in in-terventional cardiology about advantages and disadvantages of bioresorbable stent .This article summarizes the advantages and disadvan-tages of the stent .

Envirobiosens. New trends in bio-sensing for environmental applications

Energy Technology Data Exchange (ETDEWEB)

Alcock, S. [Cranfield Biothechnology Centre, Cranfield University (United Kingdom); Cosnier, S. [Universite Joseph-Fourier, Grenoble I, Lab. d' Electrochimie Organique et de Photochimie Redox, UMR CNRS 5630, 38 (France); Magner, E. [Limerick University, Dept. of Chemical and Environmental Sciences (Ireland)] [and others

2000-07-01

The development of useful sensor systems to monitor multiple pollutants is needed for many environmental applications like the pollution monitoring and processing. The advantages of chemical sensors, bio-sensors and bio-mimetic systems should be exploited to fill specific niche applications in environmental engineering. Sensors offer particular advantages as they can be used for rapid field assessment of pollution risks, including the effects of pollutant mixtures. This conference reviews the current state of the art for bio-sensors operating in the environment and in environmental processes to develop bio-sensors practical applications in the environmental technology. The papers are presented in three parts: enzymatic sensors for environmental monitoring; affinity sensors for environmental application; cell and tissue sensors for environmental analysis, future prospects. (A.L.B.)

Advantages of the Implementation of IPSAS in Brazilian Public Accounting: Analysis of the perception of the members of GTCON

Directory of Open Access Journals (Sweden)

Josedilton Alves Diniz

2015-09-01

Full Text Available The study objective was to assess how the members of the Technical Group for the Standardization of Accounting Procedures (GTCON assess the advantages of the implementation of the International Public Sector Accounting Standards in Brazil. Therefore, a questionnaire was used, elaborated based on five theoretical approaches. The research universe corresponded to the participants in GTCON. The sample resulted in 108 respondents, totaling 27% of the population. The reliability of the tool was tested using the model defined by Cronbach (1951. As each theoretical dimension addressed consists of multiple variables, their dimensionality was reduced using Main Components Analysis (MCA. In addition, multiple linear regression was used, based on the main components of each theoretical construct. The perception of the standards, the interpretation of the standards, the cost-benefit of the implementation and the educational responsibility were submitted to analysis as independent variables, and the advantages of the implementation of the Ipsas were submitted as the dependent variable. The main results evidenced that the research participants agreed that the implementation of the Ipsas is a feasible target. As to the cost-benefit analysis of the implementation, according to the GTCON, the result of the application of the Ipsas exceeds the investments made. It was also observed that interviewees did not agree that the training and application of the Ipsas should be guaranteed through personal efforts, but through the government, i.e. the more the public sector takes responsibility for qualifying the standards, the greater the advantages that will result. Finally, regarding the interpretation of the standards, according to GTCON, it has not been well defined yet how and who will actually be responsible for the interpretation, the international entities or the local institutions involved in the process.

Ecology. The advantages of togetherness.

Science.gov (United States)

Cox, E; Bonner, J

2001-04-20

What would be the advantage of unicellular organisms becoming multicellular? For organisms that feed on organic food (heterotrophs), the most efficient way to produce energy is to metabolize the food by aerobic respiration, but the fastest way is to metabolize it by fermentation. In their Perspective, Cox and Bonner discuss a mathematical model (Pfeiffer et al.), which shows that when these two kinds of organisms (respirators and fermenters) compete for a limited food source, the respirators manage best when they are grouped in clusters rather than remaining as separate cells. In this way, multicellularity could have originated.

Advantages of computed tomographic guidance

International Nuclear Information System (INIS)

Casola, G.; Vansonnenberg, E.

1987-01-01

Both ultrasound and CT are successfully used to guide interventional procedures throughout the body. There are advantages and disadvantages to each modality and choosing one over the other will vary from case to case. Major factors influencing choice are discussed in this paper. As a general rule CT guidance is usually required for lesions in the thorax, the adrenals, the pancreas, lymph nodes, and for percutaneous abscess drainage. The authors feel that a complimentary use of ultrasound and CT is essential to optimize success and cost-effectiveness; therefore, the interventional radiologist should be familiar with both imaging modalities

Medicare Advantage-Part D Contract and Enrollment Data

Data.gov (United States)

U.S. Department of Health & Human Services — The Medicare Advantage (MA) - Part D Contract and Enrollment Data section serves as a centralized repository for publicly available data on contracts and plans,...

Comparing models of the combined-stimulation advantage for speech recognition.

Science.gov (United States)

Micheyl, Christophe; Oxenham, Andrew J

2012-05-01

The "combined-stimulation advantage" refers to an improvement in speech recognition when cochlear-implant or vocoded stimulation is supplemented by low-frequency acoustic information. Previous studies have been interpreted as evidence for "super-additive" or "synergistic" effects in the combination of low-frequency and electric or vocoded speech information by human listeners. However, this conclusion was based on predictions of performance obtained using a suboptimal high-threshold model of information combination. The present study shows that a different model, based on Gaussian signal detection theory, can predict surprisingly large combined-stimulation advantages, even when performance with either information source alone is close to chance, without involving any synergistic interaction. A reanalysis of published data using this model reveals that previous results, which have been interpreted as evidence for super-additive effects in perception of combined speech stimuli, are actually consistent with a more parsimonious explanation, according to which the combined-stimulation advantage reflects an optimal combination of two independent sources of information. The present results do not rule out the possible existence of synergistic effects in combined stimulation; however, they emphasize the possibility that the combined-stimulation advantages observed in some studies can be explained simply by non-interactive combination of two information sources.

Widening Life Expectancy Advantage of Hispanics in the United States: 1990-2010.

Science.gov (United States)

Fenelon, Andrew; Blue, Laura

2015-08-01

We examine trends in the Hispanic longevity advantage between 1990 and 2010, focusing on the contribution of cigarette smoking. We calculate life expectancy at age 50 for Hispanics and non-Hispanic whites between 1990 and 2010. We use an indirect method to calculate the contribution of smoking to changes over time in life expectancy. Among women, the Hispanic advantage in life expectancy grows from 2.14 years in 1990 (95 % CI 1.99-2.30 years) to 3.53 years in 2010 (3.42-3.64 years). More than 40 % of this increase reflects widening differences in smoking-attributable mortality. The advantage for Hispanic men increases from 2.27 years (2.14-2.41 years) to 2.91 years (2.81-3.01 years), although smoking makes only a small contribution. Despite persistent disadvantage, US Hispanics have increased their longevity advantage over non-Hispanic whites since 1990, much of which reflects the continuing importance of cigarette smoking to the Hispanic advantage.

Designing and Programming CICS Applications

CERN Document Server

Horswill, John

2011-01-01

CICS is an application server that delivers industrial-strength, online transaction management for critical enterprise applications. Proven in the market for over 30 years with many of the world's leading businesses, CICS enables today's customers to modernize and extend their applications to take advantage of the opportunities provided by e-business while maximizing the benefits of their existing investments. Designing and Programming CICS Applications will benefit a diverse audience. It introduces new users of IBM's mainframe (OS/390) to CICS features. It shows experienced users how t

Measuring Coding Intensity in the Medicare Advantage Program

Data.gov (United States)

U.S. Department of Health & Human Services — In 2004, Medicare implemented a risk-adjustment system that pays Medicare Advantage (MA) plans based on diagnoses reported for their enrollees, giving the plans an...

Managing Multiple Sources of Competitive Advantage in a Complex Competitive Environment

Directory of Open Access Journals (Sweden)

Alexandre Howard Henry Lapersonne

2013-12-01

Full Text Available The aim of this article is to review the literature on the topic of sustained and temporary competitive advantage creation, specifically in dynamic markets, and to propose further research possibilities. After having analyzed the main trends and scholars’ works on the subject, it was concluded that a firm which has been experiencing erosion of its core sources of economic rent generation, should have diversified its strategy portfolio in a search for new sources of competitive advantage, ones that could compensate for the decline of profits provoked by intensive competitive environments. This review concludes with the hypothesis that firms, who have decided to enter and manage multiple competitive environments, should have developed a multiple strategies framework approach. The management of this source of competitive advantage portfolio should have allowed persistence of a firm’s superior economic performance through the management of diverse temporary advantages lifecycle and through a resilient effect, where a very successful source of competitive advantage compensates the ones that have been eroded. Additionally, the review indicates that economies of emerging countries, such as the ones from the BRIC block, should present a more complex competitive environment due to their historical nature of cultural diversity, social contrasts and frequent economic disruption, and also because of recent institutional normalization that has turned the market into hypercompetition. Consequently, the study of complex competition should be appropriate in such environments.

Provable quantum advantage in randomness processing

OpenAIRE

Dale, H; Jennings, D; Rudolph, T

2015-01-01

Quantum advantage is notoriously hard to find and even harder to prove. For example the class of functions computable with classical physics actually exactly coincides with the class computable quantum-mechanically. It is strongly believed, but not proven, that quantum computing provides exponential speed-up for a range of problems, such as factoring. Here we address a computational scenario of "randomness processing" in which quantum theory provably yields, not only resource reduction over c...

The "Private School Advantage" in Argentina

OpenAIRE

Gustavo E. Fischman

2001-01-01

Local actors' perceptions of curricular and management changes in two private schools and one neighboring public secondary school in the city of Buenos Aires, Argentina, are analyzed. An exploration was conducted of how, within an ideologically and politically pro-reform context and a widespread acceptance of the "private school advantage," principals, teachers, and students in these schools evaluated the changes (or lack of them) in management, teaching, and curriculum orientations of the se...

Application of fuzzy logic operation and control to BWRs

International Nuclear Information System (INIS)

Junichi Tanji; Mitsuo Kinoshita; Takaharu Fukuzaki; Yasuhiro Kobayashi

1993-01-01

Fuzzy logic control schemes employing linguistic decision rules for flexible operator control strategies have undergone application tests in dynamic systems. The advantages claimed for fuzzy logic control are its abilities: (a) to facilitate direct use of skillful operator know-how for automatic operation and control of the systems and (b) to provide robust multivariable control for complex plants. The authors have also studied applications of fuzzy logic control to automatic startup operations and load-following control in boiling water reactors, pursuing these same advantages

Advantages and application of forward osmosis

Science.gov (United States)

This month's Processing column explores the use of forward osmosis to dewater and concentrate. Forward osmosis is performed with specially designed membranes and requires very little energy. Where thermal evaporation and reverse osmosis may damage or alter products, forward osmosis preserves the s...

Structural capital management creates sustainable competitiveness and prolonged first-mover advantage

Directory of Open Access Journals (Sweden)

C. R. Van Zyl

2005-12-01

Full Text Available Structural (SC capital is part of the intellectual capital that is owned by an organisation and its efficient and dedicated management is essential for the creation of shareholder value, sustainable competitive advantage, and prolonged first-mover advantage. SC consists of three types of capital, namely: innovation, organisational and process capital. Organisational capital consists of organisational culture, management philosophies etc. and has received a large amount of management attention. However, organisational capital is not as valuable towards the creation of sustainable competitiveness and first-mover advantage as innovation and process capital are. It is the purpose of this article to demonstrate how a thorough understanding and the efficient management of innovation and process capital enables organisations to achieve the afore-mentioned benefits. Innovation capital management consists primarily of patent and brand management, which are particularly important as patent management forms a high-margin justification for the implementation of organisation-wide intellectual property management, and the management of high-equity brands secures a loyal customer base and associative sustainable competitiveness and first-mover advantage benefits. Although not as obviously valuable as innovation capital, the article also explores the value that the efficient management of unique organisational processes and methodologies contribute towards the achievement of prolonged first-mover advantage and the provision of protection against competitor actions. This exploration involved an examination of contemporary literature, theories and business cases and subsequently revealed that SCM is a vital discipline/philosophy that must be implemented by any organisation wishing to achieve greater sustainable competitiveness. Innovation and process capital are of particular importance as these assets can be made tangible, leveraged and integrated into existing

Consumer Insight as Competitive Advantage Using Big Data and Analytics

OpenAIRE

Adnan Veysel Ertemel

2015-01-01

Digital revolution serves as a competitive advantage to businesses that are able to analyze consumer behavior in order to gain insights for their strategic advantage. After the advent of Internet, the past two decades witnessed generation of vast amount of business data. The amount of data is so huge that traditional database management system approaches falls short of managing and analyzing this data. This paper explores the characteristics of this phenomenon called Big Data together with An...

Irrelevance of competitive advantage for the benefits of international trade

OpenAIRE

Siggel, Eckhard

2012-01-01

International competitiveness is often regarded as crucial for the attainment of gains from trade, which may lead policy makers to subsidize exports. This view is based on confusion between the concepts of competitive and comparative advantage. The paper argues that when comparative advantage is defined and measured appropriately, not limiting it to the Ricardian and Heckscher-Ohlin models, it becomes a necessary condition for the attainment of gains from trade and it applies to all forms of ...

Interconnected firms’ relationships as a source of a competitive advantage

OpenAIRE

Iga Rudawska

2010-01-01

The mainstream economy poses the opinion that a competitive advantage lies in resources, and, consequently - in competences as well - being a share of a single company and remaining under its sole control. Recently, some researchers (e.g. Castaldo, 2007; Lavie, 2006) have revised that approach and tend to emphasise the role of other sources of competitive advantage in business strategy, which embrace new, intangible assets. Such assets are being born and developed only within the inter-firm r...

Review on use of neutron radiography at Saclay Nuclear Research Centre

Energy Technology Data Exchange (ETDEWEB)

Bayon, G [Saclay Nuclear Research Centre DRE/SRO, Gif-sur-Yvette (France)

1996-11-01

The Commissariat a l`Energie Atomique (CEA) operates three research reactors at Saclay. Each of them is equipped with a Neutron Radiology facility. Osiris is involved in studies of nuclear fuel rod behaviour during accidental events. The underwater NR facility allows to obtain images of the rods before and after power ramp. The Orphee installation is devoted to industrial application of NR including non destructive testing and real time imaging. The main activity concerns the examination of the pyrotechnic devices of the Ariane launcher programmes. Other areas of interest are also described. (author) 2 figs., 1 tab., 5 refs.

Review on use of neutron radiography at Saclay Nuclear Research Centre

International Nuclear Information System (INIS)

Bayon, G.

1996-01-01

The Commissariat a l'Energie Atomique (CEA) operates three research reactors at Saclay. Each of them is equipped with a Neutron Radiology facility. Osiris is involved in studies of nuclear fuel rod behaviour during accidental events. The underwater NR facility allows to obtain images of the rods before and after power ramp. The Orphee installation is devoted to industrial application of NR including non destructive testing and real time imaging. The main activity concerns the examination of the pyrotechnic devices of the Ariane launcher programmes. Other areas of interest are also described. (author) 2 figs., 1 tab., 5 refs

Leveraging the geospatial advantage

Science.gov (United States)

Ben Butler; Andrew Bailey

2013-01-01

The Wildland Fire Decision Support System (WFDSS) web-based application leverages geospatial data to inform strategic decisions on wildland fires. A specialized data team, working within the Wildland Fire Management Research Development and Application group (WFM RD&A), assembles authoritative national-level data sets defining values to be protected. The use of...

Advantages of Oscillatory Hydraulic Tomography

Science.gov (United States)

Kitanidis, P. K.; Bakhos, T.; Cardiff, M. A.; Barrash, W.

2012-12-01

Characterizing the subsurface is significant for most hydrogeologic studies, such as those involving site remediation and groundwater resource explo¬ration. A variety of hydraulic and geophysical methods have been developed to estimate hydraulic conductivity and specific storage. Hydraulic methods based on the analysis of conventional pumping tests allow the estimation of conductivity and storage without need for approximate petrophysical relations, which is an advantage over most geophysical methods that first estimate other properties and then infer values of hydraulic parameters. However, hydraulic methods have the disadvantage that the head-change signal decays with distance from the pumping well and thus becomes difficult to separate from noise except in close proximity to the source. Oscillatory hydraulic tomography (OHT) is an emerging technology to im¬age the subsurface. This method utilizes the idea of imposing sinusoidally varying pressure or discharge signals at several points, collecting head observations at several other points, and then processing these data in a tomographic fashion to estimate conductivity and storage coefficients. After an overview of the methodology, including a description of the most important potential advantages and challenges associated with this approach, two key promising features of the approach will be discussed. First, the signal at an observation point is orthogonal to and thus can be separated from nuisance inputs like head fluctuation from production wells, evapotranspiration, irrigation, and changes in the level of adjacent streams. Second, although the signal amplitude may be weak, one can extract the phase and amplitude of the os¬cillatory signal by collecting measurements over a longer time, thus compensating for the effect of large distance through longer sampling period.

Revealed Comparative Advantage and the Alternatives as Measures of International Specialization

DEFF Research Database (Denmark)

Laursen, Keld

2015-01-01

This paper provides an analysis of Balassa's 'revealed comparative advantage' (RCA). It shows that when using RCA, it should be adjusted such that it becomes symmetric around its neutral value. The proposed adjusted index is called 'revealed symmetric comparative advantage' (RSCA). The theoretica...... Balance, Chi Square, and Bowen's Net Trade Index. The result of the analysis is that RSCA-on balance-is the best measure of comparative advantage....... discussion focuses on the properties of RSCA and empirical evidence, based on the Jarque-Bera test for normality of the regression error terms, using both the RCA and RSCA indices. We compare RSCA to other measures of international trade specialization including the Michaely index, the Contribution to Trade...

Does cultural integration explain a mental health advantage for adolescents?

Science.gov (United States)

Bhui, Kamaldeep S; Lenguerrand, Erik; Maynard, Maria J; Stansfeld, Stephen A; Harding, Seeromanie

2012-06-01

A mental health advantage has been observed among adolescents in urban areas. This prospective study tests whether cultural integration measured by cross-cultural friendships explains a mental health advantage for adolescents. A prospective cohort of adolescents was recruited from 51 secondary schools in 10 London boroughs. Cultural identity was assessed by friendship choices within and across ethnic groups. Cultural integration is one of four categories of cultural identity. Using gender-specific linear-mixed models we tested whether cultural integration explained a mental health advantage, and whether gender and age were influential. Demographic and other relevant factors, such as ethnic group, socio-economic status, family structure, parenting styles and perceived racism were also measured and entered into the models. Mental health was measured by the Strengths and Difficulties Questionnaire as a 'total difficulties score' and by classification as a 'probable clinical case'. A total of 6643 pupils in first and second years of secondary school (ages 11-13 years) took part in the baseline survey (2003/04) and 4785 took part in the follow-up survey in 2005-06. Overall mental health improved with age, more so in male rather than female students. Cultural integration (friendships with own and other ethnic groups) was associated with the lowest levels of mental health problems especially among male students. This effect was sustained irrespective of age, ethnicity and other potential explanatory variables. There was a mental health advantage among specific ethnic groups: Black Caribbean and Black African male students (Nigerian/Ghanaian origin) and female Indian students. This was not fully explained by cultural integration, although cultural integration was independently associated with better mental health. Cultural integration was associated with better mental health, independent of the mental health advantage found among specific ethnic groups: Black Caribbean and

Does cultural integration explain a mental health advantage for adolescents?

Science.gov (United States)

Bhui, Kamaldeep S; Lenguerrand, Erik; Maynard, Maria J; Stansfeld, Stephen A; Harding, Seeromanie

2012-01-01

Background A mental health advantage has been observed among adolescents in urban areas. This prospective study tests whether cultural integration measured by cross-cultural friendships explains a mental health advantage for adolescents. Methods A prospective cohort of adolescents was recruited from 51 secondary schools in 10 London boroughs. Cultural identity was assessed by friendship choices within and across ethnic groups. Cultural integration is one of four categories of cultural identity. Using gender-specific linear-mixed models we tested whether cultural integration explained a mental health advantage, and whether gender and age were influential. Demographic and other relevant factors, such as ethnic group, socio-economic status, family structure, parenting styles and perceived racism were also measured and entered into the models. Mental health was measured by the Strengths and Difficulties Questionnaire as a ‘total difficulties score’ and by classification as a ‘probable clinical case’. Results A total of 6643 pupils in first and second years of secondary school (ages 11–13 years) took part in the baseline survey (2003/04) and 4785 took part in the follow-up survey in 2005–06. Overall mental health improved with age, more so in male rather than female students. Cultural integration (friendships with own and other ethnic groups) was associated with the lowest levels of mental health problems especially among male students. This effect was sustained irrespective of age, ethnicity and other potential explanatory variables. There was a mental health advantage among specific ethnic groups: Black Caribbean and Black African male students (Nigerian/Ghanaian origin) and female Indian students. This was not fully explained by cultural integration, although cultural integration was independently associated with better mental health. Conclusions Cultural integration was associated with better mental health, independent of the mental health advantage

The Competitive Advantages of Retail Enterprises: the Factor and the Result of Competitive Relations

Directory of Open Access Journals (Sweden)

Chorna Maryna V.

2018-03-01

Full Text Available The article is aimed at systematization and development of a conceptual-categorical apparatus of the essence of competitive advantages. The approaches to their interpretation have been allocated. The essential characteristics and stages of the life cycle of competitive advantages are considered. As active stages it is suggested to consider the following: formation, implementation, and development. The basic properties of competitive advantages such as dual character have been substantiated and supplemented. Both the factor and the effective nature of competitive advantages are characterized. On the basis of the mentioned approaches together with the identified features, a definition of the concept of «competitive advantages» as economic category has been proposed. Its use as a base along with taking into consideration the functional specificity of trade enterprises has allowed: clarifying the essence of competitive advantages of retail enterprises; suggesting their definition as a factor and as a result of competitive relations. The identification of dual character will increase the possibilities to assess competitive advantages. Prospects for further researches in this direction are connected with allocating of peculiarities and kinds of competitive advantages of retail trade enterprises with the purpose of increasing the of validity of decisions on their formation, implementation, and development.

Some applications of industrial neutrongraphy

International Nuclear Information System (INIS)

Joode, A.S.; Mury, A.G.O.S.

1987-01-01

The techniques used and main applications of neutrongraphy as non destructive inspection are presented. The advantages of this technique in relation to radiography and gamagraphy for using in industries are shown. (E.G.) [pt

Online Shopping: Advantages over the Offline Alternative

OpenAIRE

Dr Joshua Chang

2003-01-01

The advent of the Internet as a shopping medium has enabled shoppers to gain shopping benefits such as convenience and time-saving, better information, and price savings. This paper aims to provide a better understanding of the benefits of Internet shopping by identifying and discussing the advantages of Internet shopping over traditional storefront shopping.

The "Private School Advantage" in Argentina

Directory of Open Access Journals (Sweden)

Gustavo E. Fischman

2001-08-01

Full Text Available Local actors' perceptions of curricular and management changes in two private schools and one neighboring public secondary school in the city of Buenos Aires, Argentina, are analyzed. An exploration was conducted of how, within an ideologically and politically pro-reform context and a widespread acceptance of the "private school advantage," principals, teachers, and students in these schools evaluated the changes (or lack of them in management, teaching, and curriculum orientations of the secondary education sector.

Cooperative resources lead to sustainable competitive advantage

Directory of Open Access Journals (Sweden)

Fernando Vieira

2016-11-01

Full Text Available The objective of this research is to analyze how organizational resources contribute to cooperatives achieving a sustainable competitive advantage. The theoretical approach of this study is the Resource Based View and VRIO model advocated by Barney and Hesterly (2007. The research was characterized as descriptive and quantitative, through data collection from secondary sources and a survey. The data collection tool was a questionnaire devised by Peacock, Sehnem and Hoffmann (2011. Data collection took place between the months of September 2014 and March 2015. The study sample was composed of a total of 215 cooperatives from across the country, divided into 13 segments. Secondary data was subjected to content analysis. The primary data was analyzed using statistical inference, namely: descriptive statistics, mean, Pearson correlation, Varimax rotation and the Kruskal-Wallis test. The main results showed that human resources are seen as important to achieving a sustainable competitive advantage. This research contributed to and enables new studies concerning the growth of cooperatives taking into account the use of internal resources.

Advantages of GPU technology in DFT calculations of intercalated graphene

Science.gov (United States)

Pešić, J.; Gajić, R.

2014-09-01

Over the past few years, the expansion of general-purpose graphic-processing unit (GPGPU) technology has had a great impact on computational science. GPGPU is the utilization of a graphics-processing unit (GPU) to perform calculations in applications usually handled by the central processing unit (CPU). Use of GPGPUs as a way to increase computational power in the material sciences has significantly decreased computational costs in already highly demanding calculations. A level of the acceleration and parallelization depends on the problem itself. Some problems can benefit from GPU acceleration and parallelization, such as the finite-difference time-domain algorithm (FTDT) and density-functional theory (DFT), while others cannot take advantage of these modern technologies. A number of GPU-supported applications had emerged in the past several years (www.nvidia.com/object/gpu-applications.html). Quantum Espresso (QE) is reported as an integrated suite of open source computer codes for electronic-structure calculations and materials modeling at the nano-scale. It is based on DFT, the use of a plane-waves basis and a pseudopotential approach. Since the QE 5.0 version, it has been implemented as a plug-in component for standard QE packages that allows exploiting the capabilities of Nvidia GPU graphic cards (www.qe-forge.org/gf/proj). In this study, we have examined the impact of the usage of GPU acceleration and parallelization on the numerical performance of DFT calculations. Graphene has been attracting attention worldwide and has already shown some remarkable properties. We have studied an intercalated graphene, using the QE package PHonon, which employs GPU. The term ‘intercalation’ refers to a process whereby foreign adatoms are inserted onto a graphene lattice. In addition, by intercalating different atoms between graphene layers, it is possible to tune their physical properties. Our experiments have shown there are benefits from using GPUs, and we reached an

Advantages of GPU technology in DFT calculations of intercalated graphene

International Nuclear Information System (INIS)

Pešić, J; Gajić, R

2014-01-01

Over the past few years, the expansion of general-purpose graphic-processing unit (GPGPU) technology has had a great impact on computational science. GPGPU is the utilization of a graphics-processing unit (GPU) to perform calculations in applications usually handled by the central processing unit (CPU). Use of GPGPUs as a way to increase computational power in the material sciences has significantly decreased computational costs in already highly demanding calculations. A level of the acceleration and parallelization depends on the problem itself. Some problems can benefit from GPU acceleration and parallelization, such as the finite-difference time-domain algorithm (FTDT) and density-functional theory (DFT), while others cannot take advantage of these modern technologies. A number of GPU-supported applications had emerged in the past several years (www.nvidia.com/object/gpu-applications.html). Quantum Espresso (QE) is reported as an integrated suite of open source computer codes for electronic-structure calculations and materials modeling at the nano-scale. It is based on DFT, the use of a plane-waves basis and a pseudopotential approach. Since the QE 5.0 version, it has been implemented as a plug-in component for standard QE packages that allows exploiting the capabilities of Nvidia GPU graphic cards (www.qe-forge.org/gf/proj). In this study, we have examined the impact of the usage of GPU acceleration and parallelization on the numerical performance of DFT calculations. Graphene has been attracting attention worldwide and has already shown some remarkable properties. We have studied an intercalated graphene, using the QE package PHonon, which employs GPU. The term ‘intercalation’ refers to a process whereby foreign adatoms are inserted onto a graphene lattice. In addition, by intercalating different atoms between graphene layers, it is possible to tune their physical properties. Our experiments have shown there are benefits from using GPUs, and we reached an

A Note on Evolutionary Algorithms and Its Applications

Science.gov (United States)

Bhargava, Shifali

2013-01-01

This paper introduces evolutionary algorithms with its applications in multi-objective optimization. Here elitist and non-elitist multiobjective evolutionary algorithms are discussed with their advantages and disadvantages. We also discuss constrained multiobjective evolutionary algorithms and their applications in various areas.

HOW CAN THE STATE SUPPORT THE INNOVATIONS TO BUILD SUSTAINABLE COMPETITIVE ADVANTAGE OF THE COUNTRY

Directory of Open Access Journals (Sweden)

Anna Zaušková

2013-11-01

Full Text Available As the crisis gets longer and deeper, growth disparities between some European regions are increasing, there is an even stronger need to accelerate innovation support and deepen it in the areas crucial to innovation, such as higher education, innovation-based entrepreneurship and demand-side measures. Europe needs fresh dynamism in its economy. Existing industries and the countries, too, need to develop new applications and new business models in order to grow and maintain their competitive advantage. This calls for an innovation-driven structural change, attracting top talent and reward innovative entrepreneurs, offering them much better opportunities to start and grow new businesses. Several studies were done exploring the innovations and their importance for the companies to achieve a sustainable competitive advantage. The article describes basic approaches and the model of relationship between key factors and their influence on the construct success of the company. As an outcome from this model it is clear that innovation orientation of the management and ability to launch innovations onto the market are central aspects of the success. The article deals with current status of innovations in Slovakia, identifying what are the preconditions for future development of the environment that is supporting innovations and how are they fulfilled in Slovakia.

Competitive Advantages from Horizontal Relationships in Productive Agglomerations: perceptions of local agents

Directory of Open Access Journals (Sweden)

Leonardo Pinheiro Deboçã

2015-11-01

Full Text Available Objective – This paper aims to assess to what extent relational view assumptions can explain competitive advantages perceived in the industrial agglomeration contexts of small businesses. Design/methodology/approach – We used qualitative research; two furniture centers, Misassol (SP and Ubá (MG, were examined through comparative data analysis. Data was collected through interviews with executives from 40 companies and 13 supporting organizations. The relational view and its assumptions point to factors that generate competitive advantage resulting from collaborative relationships between companies. Moreover, agglomerations provide intense relationships and are encouraged by governance entities. Findings – No competitive advantages clearly established due to relational gains were identified. The behavior of entrepreneurs in both centers tends strongly towards individualism. What agents identify as competitive advantages corresponds to situational or contextual factors in these centers and do not result from the realization of relational view assumptions, escaping from this paradigm. Relational gains can result only from subgroups that are formed through affinity, with no intervention from governance. Practical implications – Despite an agglomeration tendency within companies belonging to the furniture sector, a strong inclination towards individualism creates barriers to obtaining additional advantages resulting from relational gains, whether due to market regionalization, access of sales representatives, or logistics and tax costs, among other issues. However, actions in small groups are an important governance mechanism for that context. Contributions – Evaluate the assumptions of relational view and its explanatory power for competitive advantages in agglomerations of Brazilian furniture companies.

EXISTS A RELATIONSHIP BETWEEN STRATEGIC HUMAN RESOURCES MANAGEMENT, INNOVATION AND COMPETITIVE ADVANTAGE?

Directory of Open Access Journals (Sweden)

ANCA-IOANA MUNTEANU

2015-02-01

Full Text Available This paper is purely theoretical, having as starting points both existing information in the literature and their correlations. The text does not have a generalized, but represent personal opinions and conclusions. Critically analyzing the definitions given in the literature the term "strategic human resource management ", we found that most of them referred to the involvement he has it in obtaining competitive advantage of an organization. Also, starting from the study of different approaches to strategic management of human resources, we can see that besides the role that obtain competitive advantage, it supports innovative activity of a company. So we can talk about a link between strategic management of human resources, innovation and achieving competitive advantage. By presenting how strategic human resource management can be implemented in an organization, its high performance practices for human resources, it demonstrates that they support employee creativity through free expression of ideas, involvement in decision making, resulting in the way to innovation and thus to obtain competitive advantage. This work, theoretical, was completed by a presentation that show the interdependencies that exist between the three think elements: strategic human resources management, innovation, competitive advantage.

Competitive Advantage in Intercollegiate Athletics: Role of Intangible Resources.

Science.gov (United States)

Won, Doyeon; Chelladurai, Packianathan

2016-01-01

The present research explored the dynamics of competitive advantages in intercollegiate athletics by investigating the contribution of intangible resources (i.e., athletic and academic reputations) on the generation of more tangible resources (i.e., human and financial resources), which in turn influence the athletic performance (i.e., winning record) and academic performance (i.e., graduation rates), and gender equity. The research was based entirely on archival data of 324 NCAA Division I member institutions. The results of the SEM supported the study's basic arguments that tangible resources are the sources of competitive advantages in Division I intercollegiate athletics, and that intangible resources contribute to the generation of tangible resources.

What's your number? The effects of trial order on the one-target advantage.

Science.gov (United States)

Bested, Stephen R; Khan, Michael A; Lawrence, Gavin P; Tremblay, Luc

2018-05-01

When moving our upper-limb towards a single target, movement times are typically shorter than when movement to a second target is required. This is known as the one-target advantage. Most studies that have demonstrated the one-target advantage have employed separate trial blocks for the one- and two-segment movements. To test if the presence of the one-target advantage depends on advance knowledge of the number of segments, the present study investigated whether the one-target advantage would emerge under different trial orders/sequences. One- and two-segment responses were organized in blocked (i.e., 1-1-1, 2-2-2), alternating (i.e., 1-2-1-2-1-2), and random (i.e., 1-1-2-1-2-2) trial sequences. Similar to previous studies, where only blocked schedules have typically been utilized, the one-target advantage emerged during the blocked and alternate conditions, but not in the random condition. This finding indicates that the one-target advantage is contingent on participants knowing the number of movement segments prior to stimulus onset. Copyright © 2018 Elsevier B.V. All rights reserved.

Industrial application of radiation curing

Energy Technology Data Exchange (ETDEWEB)

Sasaki, Takashi [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

1994-12-31

The contents are advantages of radiation processes - a solvent-free system, less energy consumative, higher production rate, processability at ambient temperature; electron beams vs. ultraviolet curing; applications -broad spectrum of markets use radiation curable materials.

Industrial application of radiation curing

International Nuclear Information System (INIS)

Takashi Sasaki

1993-01-01

The contents are advantages of radiation processes - a solvent-free system, less energy consumative, higher production rate, processability at ambient temperature; electron beams vs. ultraviolet curing; applications -broad spectrum of markets use radiation curable materials

Immediately sequential bilateral cataract surgery: advantages and disadvantages.

Science.gov (United States)

Singh, Ranjodh; Dohlman, Thomas H; Sun, Grace

2017-01-01

The number of cataract surgeries performed globally will continue to rise to meet the needs of an aging population. This increased demand will require healthcare systems and providers to find new surgical efficiencies while maintaining excellent surgical outcomes. Immediately sequential bilateral cataract surgery (ISBCS) has been proposed as a solution and is increasingly being performed worldwide. The purpose of this review is to discuss the advantages and disadvantages of ISBCS. When appropriate patient selection occurs and guidelines are followed, ISBCS is comparable with delayed sequential bilateral cataract surgery in long-term patient satisfaction, visual acuity and complication rates. In addition, the risk of bilateral postoperative endophthalmitis and concerns of poorer refractive outcomes have not been supported by the literature. ISBCS is cost-effective for the patient, healthcare payors and society, but current reimbursement models in many countries create significant financial barriers for facilities and surgeons. As demand for cataract surgery rises worldwide, ISBCS will become increasingly important as an alternative to delayed sequential bilateral cataract surgery. Advantages include potentially decreased wait times for surgery, patient convenience and cost savings for healthcare payors. Although they are comparable in visual acuity and complication rates, hurdles that prevent wide adoption include liability concerns as ISBCS is not an established standard of care, economic constraints for facilities and surgeons and inability to fine-tune intraocular lens selection in the second eye. Given these considerations, an open discussion regarding the advantages and disadvantages of ISBCS is important for appropriate patient selection.

Advantages and disadvantages of developing nuclear power

International Nuclear Information System (INIS)

Wang Zhixin

1987-01-01

To solve the problem of the shortage of electricity in China, an objective assessment of the advantages and disadvantages of generating electricity from different energy sources is necessary. Nuclear power is evaluated against hydro-, oil-, gas- and coal-power. It is proposed to develop nuclear power in a planned way as a sensible long term strategy

Accelerator-driven thermal fission systems may provide energy supply advantages

International Nuclear Information System (INIS)

Linford, R.K.

1992-01-01

This presentation discusses the energy supply advantages of using accelerator-driven thermal fission systems. Energy supply issues as related to cost, fuel supply stability, environmental impact, and safety are reviewed. It is concluded that the Los Alamos Accelerator Transmutation of Waste (ATW) concept, discussed here, has the following advantages: improved safety in the form of low inventory and subcriticality; reduced high-level radioactive waste management timescales for both fission products and actinides; and a very long-term fuel supply requiring no enrichment

Competing through operations and supply: The role of classic and extended resource-based advantage

OpenAIRE

Lewis, Michael; Brandon-Jones, Alistair; Slack, Nigel; Howard, Mickey

2010-01-01

Purpose: The paper seeks to analyze the evolution of competitive advantage using both "classic" and "extended" resource-based theory (RBT). The aim is to examine the different ways in which "classic" and "extended" resource-based advantage develops and how they might combine to create long-term advantage. Design/methodology/approach: A single case study method is used to examine the process by which competitive advantage has accumulated over a 50-year period at Food Services Group Inc., a hig...

First Mover Advantages in Central and Eastern Europe

DEFF Research Database (Denmark)

Jakobsen, Kristian

2007-01-01

Businesses entering early into new markets are believed to attain crucial competitive advantages over later entrants. However, this contention receives only mixed support in the empirical literature, in part because performance is measured in different ways. We reexamine the performance difference...... between early movers and followers entering new geographical markets based on a sample of foreign entrants in Poland, Hungary and Lithuania. We contrast market share with two other measures of firm performance that are based on the managers' perception of their own performance relative to their own prior...... expectations and relative to industry standards. We find that market share is strongly related to order of entry, but we did not find a positive relationship between order of entry and perceived performance. We found general support for early mover advantages in Hungary and Poland but a strongly negative...

Micro-optics for microfluidic analytical applications.

Science.gov (United States)

Yang, Hui; Gijs, Martin A M

2018-02-19

This critical review summarizes the developments in the integration of micro-optical elements with microfluidic platforms for facilitating detection and automation of bio-analytical applications. Micro-optical elements, made by a variety of microfabrication techniques, advantageously contribute to the performance of an analytical system, especially when the latter has microfluidic features. Indeed the easy integration of optical control and detection modules with microfluidic technology helps to bridge the gap between the macroscopic world and chip-based analysis, paving the way for automated and high-throughput applications. In our review, we start the discussion with an introduction of microfluidic systems and micro-optical components, as well as aspects of their integration. We continue with a detailed description of different microfluidic and micro-optics technologies and their applications, with an emphasis on the realization of optical waveguides and microlenses. The review continues with specific sections highlighting the advantages of integrated micro-optical components in microfluidic systems for tackling a variety of analytical problems, like cytometry, nucleic acid and protein detection, cell biology, and chemical analysis applications.

Nattokinase: production and application.

Science.gov (United States)

Dabbagh, Fatemeh; Negahdaripour, Manica; Berenjian, Aydin; Behfar, Abdolazim; Mohammadi, Fatemeh; Zamani, Mozhdeh; Irajie, Cambyz; Ghasemi, Younes

2014-11-01

Nattokinase (NK, also known as subtilisin NAT) (EC 3.4.21.62) is one of the most considerable extracellular enzymes produced by Bacillus subtilis natto. The main interest about this enzyme is due to its direct fibrinolytic activity. Being stable enough in the gastrointestinal tract makes this enzyme a useful agent for the oral thrombolytic therapy. Thus, NK is regarded as a valuable dietary supplement or nutraceutical. Proven safety and ease of mass production are other advantages of this enzyme. In addition to these valuable advantages, there are other applications attributed to NK including treatment of hypertension, Alzheimer's disease, and vitreoretinal disorders. This review tends to bring a brief description about this valuable enzyme and summarizes the various biotechnological approaches used in its production, recovery, and purification. Some of the most important applications of NK, as well as its future prospects, are also discussed.

Integer programming theory, applications, and computations

CERN Document Server

Taha, Hamdy A

1975-01-01

Integer Programming: Theory, Applications, and Computations provides information pertinent to the theory, applications, and computations of integer programming. This book presents the computational advantages of the various techniques of integer programming.Organized into eight chapters, this book begins with an overview of the general categorization of integer applications and explains the three fundamental techniques of integer programming. This text then explores the concept of implicit enumeration, which is general in a sense that it is applicable to any well-defined binary program. Other

An analysis of home advantage in Iranian football super league

Directory of Open Access Journals (Sweden)

Rasool Hemayat TALAB

2016-12-01

Full Text Available Aim: The purpose of this study was to investigate home advantage in Iranian Football Super League. Methods: The information regarding wins, losses, goals for, goals against, yellow cards, red cards and gained points in matches at home and away of Super League teams of Iran was obtained using the internet website www.Soccerway.com and was analyzed. Results: The results showed that the mean of wins, goals for and points gained from matches in the home have been more than matches away, but in matches away, the mean of losses, yellow cards, red cards and goals against have been higher. Also, the percentage of home advantage in Iranian Football Super League was close to international norms.  Conclusion: According to the results, sport psychologist, coaches and people who are involved in football are recommended to pay more attention to this advantage and make short and long term plans to do psychological readiness and competitive performance.

The Topical Factors of Development of the National Competitive Advantages

Directory of Open Access Journals (Sweden)

Kolomiets Ganna M.

2017-01-01

Full Text Available The article considers the qualitative changes of the national competitive advantages as derivatives of the evolution of technological modes in the global business environment; the role of both the formal and the informal institutions in their development and implementation has been analyzed. With this in mind, topical in the development of competitive advantages will be improving the formal institutions in conjunction with the informal: recognition and use of the positive potential of the national values and attitudes. High adaptatibility towards turbulence of the economic environment, desire and capability to master new knowledge, technologies, fulfill one’s own abilities in the native country, should define the focus and content of transformations of the formal institutions. Results of the analysis show that nowadays a value shift is going on, attitudes are being changed, which suggests that there’s a necessity to understand that disposition of power institutions, mistrust to authorities can significantly slow down transformations in the direction of «competitive advantages – competitiveness»

Advantages and disadvantages of digital education

OpenAIRE

Mąkosa, Paweł

2013-01-01

The digitization of education in Poland is spreading into more and more areas. Therefore, it becomes necessary to analyse all its aspects, both advantages and disadvantages. In the performed reflection, an attempt to present the current state of the access to computers, the Internet and e-course books in Polish schools has been made. On the basis of the secondary analysis of various recent studies as well as own research performed, it has been determined that the level of digitization of educ...

How to Achieve a Competitive Advantage

OpenAIRE

Adina Musetescu

2013-01-01

In order to succeed in any market a company has to decide which strategy is more appropriate to use, which means identifying the sources of a potential competitive advantage such as skills or resources. Superior skills in creating a special product can represent the element that is setting the company apart from its competitors. That is easily translated into a very good quality of the products. The resources of the company refer to the great number of retailers (a good distribution chain tha...

Advantages of floating covers with LLDPE Liners; Ventajas del uso de geomembranas LLDPE en cubiertas flotantes

Energy Technology Data Exchange (ETDEWEB)

Munoz Gomez, J. M.

2014-02-01

Using floating covers in irrigation pounds and waste dam gives many advantages. It is a very interesting investment for those place with a high evaporation ratio. this is an easy system which improves several aspects in irrigation or drinkable water reservoirs, mainly it saves water and it saves clean-works (time and cost). It is also used in waste dam to deodorization. Time ago this application was developed with PVC liners and TPO liners, now the innovation is LLDPE liners which improve mechanical properties, durability and an easier installation. This paper develops the state of art of this design technology, and the back ground of our experience. (Author)

Collegiate Licensing in Canada and the Statutory Advantage.

Science.gov (United States)

Burshtein, Sheldon

1985-01-01

Discusses a specific provision in a Canadian statute enabling universities and other educational institutions to obtain protection and financial gain in a collegiate licensing program, an advantage not held in other countries or by other trademark licensers in Canada. (MSE)

KNOWLEDGE MANAGEMENT AND LEADERSHIP - THEIR IMPACT ON CREATING SUSTAINABLE COMPETITIVE ADVANTAGE

Directory of Open Access Journals (Sweden)

Ljiljana Stošić Mihajlović

2014-10-01

Full Text Available Modern economy, less oriented to natural resources, and more on the intellectual aspects of asset, based on the fact that the competitive advantage of any company is the knowledge that she possesses. Terms of economic theory terms, it is necessary to build a strategy that will produce super profits, ie. strategy that will enable the efficient exploitation of knowledge companies to win competitive advantage. It is assumed that knowledge in its explicit or implicit manifestations can be managed. The question is how to develop a knowledge management strategy that would exploit this valuable resource and protect its value. Possibility of knowledge management is becoming increasingly important in today's so-called. knowledge economy (knowledge economy. The creation and dissemination of knowledge within modern organizations is becoming increasingly crucial factor in achieving and maintaining its competitive advantage. In fact, the only sustainable competitive advantage of modern organizations derives from what the company knows, how efficiently used what you know and how quickly acquire and use new knowledge. Modern organizations in the era of knowledge is one who learns, remembers and acts on the basis of the information and knowledge available in the best possible way.

Advantages and implications of U233 fueled thermionic space power energy conversion

International Nuclear Information System (INIS)

Terrell, C.W.

1992-01-01

In this paper two recent analyses are reported which demonstrate advantages of a U233 fueled thermionic fuel element (TFE) compared to 93 w/o U235, and that application (mission) has broad latitude in how space power reactor systems could or should be optimized. A reference thermionic reactor system was selected to provide the basis for the fuel comparisons. Both oxide and metal fuel forms were compared. Of special interest was to estimate the efficiencies of the four fuel forms to produce electrical power. A figure of merit (FOM) was defined which is directly proportional to the electrical average electrical power produced is proportional to the electrical power produced per unit uranium mass. In a TFE the average electrical power produced is proportional to the emitter surface area (Esa), hence the ratio Esa/Mu was selected as the FOM. Results indicate that the choice of fuel type and form leads to wide variations in critical and system masses FOM values, and system total power

Application of nanotechnology in biology and promising application in radiobiology

International Nuclear Information System (INIS)

Zhao Sanhu; Ni Jin; Cai Jianming

2011-01-01

As one of the 21-Century high and new technologies, nanotechnology (NT) has been widely applied in all aspects of biology. From now on, it has been used for detecting substance, carrying drug, antibacterial and tumour therapy by its photometric characteristics, mechanics characteristics, thermal property and other characteristics. Because of the unique advantages of nanoparticles, nanotechnology has great potential in radioprotection. In this article, we introduced the application of nanotechnology in modern biology and the primal problems. Meantime, we explain the prospect of its application in radioprotection. (authors)

QUALITY IMPROVEMENT MODEL OF NURSING EDUCATION IN MUHAMMADIYAH UNIVERSITIES TOWARD COMPETITIVE ADVANTAGE

Directory of Open Access Journals (Sweden)

Abdul Aziz Alimul Hidayat

2017-06-01

Full Text Available Introduction: Most of (90,6% nursing education quality in East Java was still low (BAN-PT, 2012. It was because the quality improvement process in nursing education generally was conducted partially (random performance improvement. The solution which might be done was through identifying proper quality improvement model in Nursing Education toward competitive advantage. Method: This research used survey to gain the data. The research sample was 16 Muhammadiyah Universities chosen using simple random sampling. The data were collected with questionnaires of 174 questions and documentation study. Data analysis used was Partial Least Square (PLS analysis technique. Result: Nursing education department profile in Muhammadiyah Universities in Indonesia showed of 10 years establishment, accredited B and the competition level in one city/regency was averagely more than three Universities becoming the competitors. Based on the quality improvement model analysis of nursing education toward competitive advantage on Muhammadiyah Universities, it was directly affected by the focus of learning and operasional process through human resources management improvement, on the other hand information system also directly affected on quality improvement, also affected quality process components; leadership, human resources, focus of learning and operational process. In improving human resources would be directly influenced with proper strategic planning. Strategic planning was directly influenced with leadership. Thus, in improving quality of nursing education, the leadership role of department, proper information system, and thehuman resources management improvement must be implemented.  Conclusion: Quality improvement model in nursing education was directly determined with learning and operational process through human resources management along with information system, strategic planning factors, and leadership. The research finding could be developed in quality

On the issue of methodology of estimating the regional competitive advantages by types of activity

Directory of Open Access Journals (Sweden)

Azat Rashitovich Safiullin

2015-06-01

Full Text Available Objective to develop the research methodology of the competitive position of territories by types of economic activities to define the relevant types of economic activities and to diagnose their competitive advantages. Methods a differentiated approach to the analysis of competitiveness based on matrix models of competitive positioning which allows to identify the relevant types of economic activities of the territory. This approach determined the choice of specific research methods dialectics abstraction systematic logical structural comparative and statistical. The application of the above methods helped to ensure the validity of the analysis results theoretical and practical conclusions. Results in the study were used the experience and knowledge gained during an earlier undertaken series of projects relating to the assessment of economy efficiency of Tatarstan Republic in 20052011.Previous reports dealt with the change of the selected industries positions of the Republic the structure and dynamics of the competitive position of these industries compared to the leading Russian regions. A distinctive feature of the research results presented in this article is a comparative analysis of competitive advantages of economic activities of Tatarstan Republic based on the matrix model of competitive positioning. Scientific novelty for the first time the matrix model of diagnostics of competitive advantages of the territory by the type of economic activity was proposed which allows to identify the priority industrial portfolio and provide targeted management actions to enhance its investment attractiveness. Practical value the main provisions and conclusions of the article can be used by legislative and executive authorities of the Russian Federation business community research institutions and organizations to develop strategies and programs of socioeconomic development and territorial planning schemes priority directions of industrial and investment

Achieving a competitive advantage in managed care.

Science.gov (United States)

Stahl, D A

1998-02-01

When building a competitive advantage to thrive in the managed care arena, subacute care providers are urged to be revolutionary rather than reactionary, proactive rather than passive, optimistic rather than pessimistic and growth-oriented rather than cost-reduction oriented. Weaknesses must be addressed aggressively. To achieve a competitive edge, assess the facility's strengths, understand the marketplace and comprehend key payment methods.

[The advantage of multidisciplinary treatment of presbycusis].

Science.gov (United States)

Bouccara, Didier; Madjlessi, Arach; Mosnier, Isabelle

2010-01-01

Attributable to the ageing of the hearing system, presbycusis presents a wide variability in the general population. Early detection is necessary in order to be able to provide the patient with a suitable hearing aid. Collaboration between otolaryngologists and geriatricians proves to be advantageous as a consultation for a memory complaint may be the opportunity to detect presbycusis and vice versa.

Hydraulic Apparatus for Mechanical Testing of Nuts

Science.gov (United States)

Hinkel, Todd J.; Dean, Richard J.; Hacker, Scott C.; Harrington, Douglas W.; Salazar, Frank

2004-01-01

The figure depicts an apparatus for mechanical testing of nuts. In the original application for which the apparatus was developed, the nuts are of a frangible type designed for use with pyrotechnic devices in spacecraft applications in which there are requirements for rapid, one-time separations of structures that are bolted together. The apparatus can also be used to test nonfrangible nuts engaged without pyrotechnic devices. This apparatus was developed to replace prior testing systems that were extremely heavy and immobile and characterized by long setup times (of the order of an hour for each nut to be tested). This apparatus is mobile, and the setup for each test can now be completed in about five minutes. The apparatus can load a nut under test with a static axial force of as much as 6.8 x 10(exp 5) lb (3.0 MN) and a static moment of as much as 8.5 x 10(exp 4) lb in. (9.6 x 10(exp 3) N(raised dot)m) for a predetermined amount of time. In the case of a test of a frangible nut, the pyrotechnic devices can be exploded to break the nut while the load is applied, in which case the breakage of the nut relieves the load. The apparatus can be operated remotely for safety during an explosive test. The load-generating portion of the apparatus is driven by low-pressure compressed air; the remainder of the apparatus is driven by 110-Vac electricity. From its source, the compressed air is fed to the apparatus through a regulator and a manually operated valve. The regulated compressed air is fed to a pneumatically driven hydraulic pump, which pressurizes oil in a hydraulic cylinder, thereby causing a load to be applied via a hydraulic nut (not to be confused with the nut under test). During operation, the hydraulic pressure is correlated with the applied axial load, which is verified by use of a load cell. Prior to operation, one end of a test stud (which could be an ordinary threaded rod or bolt) is installed in the hydraulic nut. The other end of the test stud passes

Assessment of protection and comparative advantage in rice ...

African Journals Online (AJOL)

The main analytical framework used was the Policy Analysis Matrix (PAM). The policy distortions were measured through Nominal Protection Coefficient (NPC) and Effective Protection Coefficient (EPC). Private Profitability Coefficient (PPC) was used to measure the comparative advantage a processor has in producing ...

Parenting Advantage in the MNC

DEFF Research Database (Denmark)

Nell, Phillip C.; Ambos, Björn

2013-01-01

subsidiaries located in Europe. Our results indicate that the external embeddedness of the MNC is an antecedent to headquarters' value creation. We find that headquarters' investments into their own relationships with the subsidiaries' contexts are positively related to the value added by headquarters....... Furthermore, this relationship is stronger when the subsidiary itself is strongly embedded. We discuss implications for the MNC literature, embeddedness research, and the literature on parenting and headquarters' roles......What determines the value an MNC's headquarters adds to its own affiliates? In this paper, we shed light on this question by linking the embeddedness view of the multinational corporation to the literature on parenting advantage. We test our hypotheses on an original dataset of 124 manufacturing...

Informal leadership support: an often overlooked competitive advantage.

Science.gov (United States)

Peters, L H; O'Connor, E J

2001-01-01

As environmental pressures mount, the advantage of using the same strategies and tactics employed by competitors continues to shrink. An alternative is adapting and applying answers successfully employed in other industries to health care organizations. Working with informal influence leaders to share your change management efforts represents one such example. Informal influence leaders offer an often-overlooked source of competitive advantage--they have already earned credibility and respect from others, who regularly look to them for guidance. When sharing their views, they significantly influence the acceptance or rejection of new initiatives. Influence leaders reach into every conversation, every meeting, and every decision made in an organization. The important question is whether they will exert their leadership in support or in opposition to changes you propose. By identifying influence leaders and inviting them to join a group to discuss change initiatives, physician executives can create a positive force for change.

Applicability of compton imaging in nuclear decommissioning activities

International Nuclear Information System (INIS)

Ljubenov, V.Lj.; Marinkovic, P.M.

2002-01-01

During the decommissioning of nuclear facilities significant part of the activities is related to the radiological characterization, waste classification and management. For these purposes a relatively new imaging technique, based on information from the gamma radiation that undergoes Compton scattering, is applicable. Compton imaging systems have a number of advantages for nuclear waste characterization, such as identifying hot spots in mixed waste in order to reduce the volume of high-level waste requiring extensive treatment or long-term storage, imaging large contaminated areas and objects etc. Compton imaging also has potential applications for monitoring of production, transport and storage of nuclear materials and components. This paper discusses some system design requirements and performance specifications for these applications. The advantages of Compton imaging are compared to competing imaging techniques. (author)

[Anterior lumbar interbody fusion. Indications, technique, advantages and disadvantages].

Science.gov (United States)

Richter, M; Weidenfeld, M; Uckmann, F P

2015-02-01

Anterior lumbar interbody fusion (ALIF) for lumbar interbody fusion from L2 to the sacrum has been an established technique for decades. The advantages and disadvantages of ALIF compared to posterior interbody fusion techniques are discussed. The operative technique is described in detail. Complications and avoidance strategies are discussed. This article is based on a selective literature search using PubMed and the experience of the authors in this medical field. The advantages of ALIF compared to posterior fusion techniques are the free approach to the anterior disc space without opening of the spinal canal or the neural foramina. This gives the possibility of an extensive anterior release and placement of the largest possible cages without the risk of neural structure damage. The disadvantages of ALIF are the additional anterior approach and the related complications. The most frequent complication is due to damage of vessels. The rate of complications is significantly increased in revision surgery. The ALIF technique meaningfully expands the repertoire of the spinal surgeon especially for the treatment of non-union after interbody fusion, in patients with epidural scar tissue at the index level and spinal infections. Advantages and disadvantages should be considered when evaluating the indications for ALIF.

Big fish in small banking ponds? Cost advantage and foreign affiliate presence

NARCIS (Netherlands)

Galema, R.J.

We distinguish cost advantage at home from cost advantage vis-à-vis incumbent banks in destination markets to explain the probability of foreign bank affiliate lending. We combine detailed affiliate lending data of all German banks with public bank micro data from 59 destination markets. The

Quantum communication complexity advantage implies violation of a Bell inequality

Science.gov (United States)

Buhrman, Harry; Czekaj, Łukasz; Grudka, Andrzej; Horodecki, Michał; Horodecki, Paweł; Markiewicz, Marcin; Speelman, Florian; Strelchuk, Sergii

2016-01-01

We obtain a general connection between a large quantum advantage in communication complexity and Bell nonlocality. We show that given any protocol offering a sufficiently large quantum advantage in communication complexity, there exists a way of obtaining measurement statistics that violate some Bell inequality. Our main tool is port-based teleportation. If the gap between quantum and classical communication complexity can grow arbitrarily large, the ratio of the quantum value to the classical value of the Bell quantity becomes unbounded with the increase in the number of inputs and outputs. PMID:26957600

Is Financial Development Another Source of Comparative Advantage? Evidence from China

Institute of Scientific and Technical Information of China (English)

Qun Bao; Jiayu Yang

2009-01-01

Using panel data for 29 provinces in China during 1990-2004, the present paper attempts to explore a possible link between financial development and China' s foreign trade. Three measures of comparative advantage in manufactured goods have been applied in our study, including Balassa's revealed coraparative advantage, the net manufactured export index, and the Michaely index. We also use four indicators of financial development to identify the different fimctions of regional financial development, and to determine both size and efficiency features of financial institutions. The estimation results suggest that besides factor endowments, foreign firms and infrastructure, financial development has a quantitatively large and robust effect on China' s manufactured goods trade. Therefore, further reform of China' s financial system should be encouraged to fully exploit the comparative advantage of China's foreign trade.

Ferrite nanoparticles: Synthesis, characterisation and applications in electronic device

Energy Technology Data Exchange (ETDEWEB)

Kefeni, Kebede K., E-mail: kkefeni@gmail.com; Msagati, Titus A.M.; Mamba, Bhekie B.

2017-01-15

Highlights: • Available synthesis methods of ferrite nanoparticles (FNPs) are briefly reviewed. • Summary of the advantage and limitation of FNPs synthesis techniques are presented. • The existing most common FNPs characterisation techniques are briefly reviewed. • Major application areas of FNPs in electronic materials are reviewed. - Abstract: Ferrite nanoparticles (FNPs) have attracted a great interest due to their wide applications in several areas such as biomedical, wastewater treatment, catalyst and electronic device. This review focuses on the synthesis, characterisation and application of FNPs in electronic device with more emphasis on the recently published works. The most commonly used synthesis techniques along with their advantages and limitations are discussed. The available characterisation techniques and their application in electronic materials such as sensors and biosensors, energy storage, microwave device, electromagnetic interference shielding and high-density recording media are briefly reviewed.

Launching a medicare advantage plan: smart planning saves headaches.

Science.gov (United States)

Abrams, Robert J; Mullaney, Teri L

2007-11-01

If you're considering setting up a Medicare Advantage plan, the following are important considerations: Financial analysis. Payment rates. Medical costs. Marketing and operational costs. Technology infrastructure. Staffing.

Advantages of going modular in HTRs

International Nuclear Information System (INIS)

Reutler, H.; Lohnert, G.H.

1984-01-01

A multitude of problems that are encountered in large HTR power plans, constructively as well as concerning plant safety, can be related to the mere physical size of a large reactor core. In limiting the thermal power of an HTR-module to approximately 200 MW an inherent limitation of the fuel element temperature below critical values can be guaranteed for all possible core heat up accidents. Consequently, a significant failure rate of coated particles can be excluded and, hence, out of physical reasons, no intolerable fission product release from the core will ever have to be considered. The HTR-module is so qualified and very well suited for all possible plant sides which have to be taken into consideration for medium sized plants for the production of process steam and electricity. The cost investigations show considerable cost advantages for modular HTRs. For German conditions it was found that even a four-modular plant (800 MW/thermal) is competitive with a fossile-fueled plant of the same size, the specific plant costs were evaluated to be DM 4700/kW (electric). Moreover the investigations show that the increase of the power of the modular unit yields only small cost advantages, therefore in a modularized power plant it even would be possible to reduce the power of a modular unit below 200 MW without having to cope with severe economic penalties, if the distance from technological or safety limits is felt to be too small. (orig.)

Applications of Electrical Impedance Tomography (EIT): A Short Review

Science.gov (United States)

Kanti Bera, Tushar

2018-03-01

Electrical Impedance Tomography (EIT) is a tomographic imaging method which solves an ill posed inverse problem using the boundary voltage-current data collected from the surface of the object under test. Though the spatial resolution is comparatively low compared to conventional tomographic imaging modalities, due to several advantages EIT has been studied for a number of applications such as medical imaging, material engineering, civil engineering, biotechnology, chemical engineering, MEMS and other fields of engineering and applied sciences. In this paper, the applications of EIT have been reviewed and presented as a short summary. The working principal, instrumentation and advantages are briefly discussed followed by a detail discussion on the applications of EIT technology in different areas of engineering, technology and applied sciences.

Peaceful applications of nuclear explosions

International Nuclear Information System (INIS)

Wallin, L.B.

1975-12-01

The intension of this report is to give a survey of the field of peaceful applications of nuclear explosions. As an introduction some examples of possibilities of application are given together with a simple description of nuclear explosions under ground. After a summary of what has been done and will be done in this field nationally and internationally, a short discussion of advantages and problems with peaceful application of nuclear explosions follows. The risks of spreading nuclear weapons due to this applications are also touched before the report is finished with an attempt to judge the future development in this field. (M.S.)

Adversarial Advantage Actor-Critic Model for Task-Completion Dialogue Policy Learning

OpenAIRE

Peng, Baolin; Li, Xiujun; Gao, Jianfeng; Liu, Jingjing; Chen, Yun-Nung; Wong, Kam-Fai

2017-01-01

This paper presents a new method --- adversarial advantage actor-critic (Adversarial A2C), which significantly improves the efficiency of dialogue policy learning in task-completion dialogue systems. Inspired by generative adversarial networks (GAN), we train a discriminator to differentiate responses/actions generated by dialogue agents from responses/actions by experts. Then, we incorporate the discriminator as another critic into the advantage actor-critic (A2C) framework, to encourage the...

Taking Advantage of Student Engagement Results in Student Affairs

Science.gov (United States)

Kinzie, Jillian; Hurtado, Sarah S.

2017-01-01

This chapter urges student affairs professionals committed to enhancing student success through data-informed decision making to take full advantage of opportunities to apply and use student engagement results.

Long-life mission reliability for outer planet atmospheric entry probes

Science.gov (United States)

Mccall, M. T.; Rouch, L.; Maycock, J. N.

1976-01-01

The results of a literature analysis on the effects of prolonged exposure to deep space environment on the properties of outer planet atmospheric entry probe components are presented. Materials considered included elastomers and plastics, pyrotechnic devices, thermal control components, metal springs and electronic components. The rates of degradation of each component were determined and extrapolation techniques were used to predict the effects of exposure for up to eight years to deep space. Pyrotechnic devices were aged under accelerated conditions to an equivalent of eight years in space and functionally tested. Results of the literature analysis of the selected components and testing of the devices indicated that no severe degradation should be expected during an eight year space mission.

Knowledge management as a means of developing a firm’s competitive advantage

Directory of Open Access Journals (Sweden)

Tomaž Čater

2001-01-01

Full Text Available Knowledge management is one of the most popular themes of modern scientific literature. However, in spite of all the published research on the importance of knowledge management, there is little said about knowledge as a direct source of a firm’s competitive advantage. In the past decades, three main hypotheses on the sources of a firm’s competitive advantage were developed; namely, the industrial organization, the resource-based and the capability-based hypotheses. In this paper, we argue that the knowledge-based hypothesis can and should be considered as the fourth tantamount hypothesis on how the sources of the competitive advantage of a firm can be explained.

Branding Strategies for Competitive Advantage: A Study of the Malaysian Banking Sector

OpenAIRE

Yoon, Alice Chee Mun

2007-01-01

“The objective of strategy is a sustainable competitive advantage, which may come from any part of the organisation's operation. The market is the judge of this advantage. Brand strategy is the process whereby the offer is postioned in the consumer's mind to produce a preception of advantage” (Arnold, 1992)

Advantages of using 192Ir γ-ray flaw detector for some products

International Nuclear Information System (INIS)

Qin Xiqi

1989-01-01

This paper describes the advantages of 192 Ir γ-ray flaw detector made in China in welding seam testings. The authors made a comparison between 192 Ir γ-ray and X-ray machine. 192 Ir γ-ray machine showed many advantages, such as shorter working hours and less labour intensity

Building Competitive Advantage in Academic Programmes in Open ...

African Journals Online (AJOL)

The paper however, suggests that greatest competitive advantage for ODL-HLIs such as OUT‟s is hidden in its postgraduate programmes. The paper stresses that improved quality and completion rates of research and postgraduate students in business, law, economics, and education and applied natural sciences should ...

Comparative Advantages of Spin-off Firms: An Evolutionary Perspective

Directory of Open Access Journals (Sweden)

Bilgehan Uzunca

2011-11-01

Full Text Available As predicted by evolutionary economics, historical antecedents matter when it comes to the relationship between survival of entrants and organizational capabilities. Spinoff firms provide an exemplary case of such relationship where the founders’ pre-entry capabilities that are inherited from the parent firm increases their survival chances. Looking closer and deeper to the evolutionary spinoff success mechanisms, I examine three specific genetic features which make spinoff firms more advantageous compared to other entrants; namely 1 Genotype: Transfer of blueprint, 2 Phenotype: Organizational learning, and 3 Memes: Informal relations and social capital. A detailed theoretical analysis of each mechanism prevails how they function and provide sustainable competitive advantage to spinoff firms. Testable hypotheses are provided about each mechanism.

Does being female provide a neuroprotective advantage following spinal cord injury?

Directory of Open Access Journals (Sweden)

Jeffrey P Datto

2015-01-01

Full Text Available It has been controversial whether gender has any effect on recovery following spinal cord injury (SCI. Past experimental and clinical research aimed at addressing this subject has led to constrasting findings on whether females hold any advantage in locomotor recovery. Additionally, for studies supporting the notion of a female gender related advantage, a definite cause has not been explained. In a recent study, using large sample sizes for comparative male and female spinal cord injury cohorts, we reported that a significant gender advantage favoring females existed in both tissue preservation and functional recovery after taking into consideration discrepancies in age and weight of the animals across sexes. Prior animal research frequently used sample sizes that were too small to determine significance with certainty and also did not account for two other factors that influence locomotor performance: age and weight. Our finding is important in light of controversy surrounding the effect of gender on outcome and the fact that SCI affects more than ten thousand new individuals annually, a population that is disproportionately male. By deepening our understanding of why a gender advantage exists, potential new therapeutics can be designed to improve recovery for the male population following the initial trauma or putatively augment the neuroprotective privilege in females for enhanced outcomes.

Invitation to View Method with Advantages and Disadvantages

Directory of Open Access Journals (Sweden)

Selçuk BUYRUKOĞLU

2018-01-01

Full Text Available Taxpayers and tax administrators sometimes may experience tax dispute. These disputes may arise from the taxpayers as well as from the tax administrators. In resolving tax disputes, tax administrators and tax payers are the first, usually administratively, solution. Because while the tax revenues of the state are possible entered into the state treasury, the taxpayers will benefit from the advantages of administrative solutions. The state and taxpayer herein will be the winner. Invitation to view is one of the administrative remedies for tax disputes. With this practice taxpayers who have caused tax evasion penalty are invited by tax administrators to make a declaration on the condition that the tax examination of the tax disputes is not started and the dispatch process has not been done to the discretion comission. In this study, advantages and disadvantages will be addressed after the definition, legal support, purpose, scope and mechanism of Invitation to view.

Complexity, Competitive Intelligence and the "First Mover" Advantage

Science.gov (United States)

Fellman, Philip Vos; Post, Jonathan Vos

In the following paper we explore some of the ways in which competitive intelligence and game theory can be employed to assist firms in deciding whether or not to undertake international market diversification and whether or not there is an advantage to being a market leader or a market follower overseas. In attempting to answer these questions, we take a somewhat unconventional approach. We first examine how some of the most recent advances in the physical and biological sciences can contribute to the ways in which we understand how firms behave. Subsequently, we propose a formal methodology for competitive intelligence. While space considerations here do not allow for a complete game-theoretic treatment of competitive intelligence and its use with respect to understanding first and second mover advantage in firm internationalization, that treatment can be found in its entirety in the on-line proceedings of the 6th International Conference on Complex Systems at http://knowledgetoday.org/wiki/indec.php/ICCS06/89

The application of cryogenics to high Reynolds number testing in wind tunnels. I - Evolution, theory, and advantages

Science.gov (United States)

Kilgore, R. A.; Dress, D. A.

1984-01-01

During the time which has passed since the construction of the first wind tunnel in 1870, wind tunnels have been developed to a high degree of sophistication. However, their development has consistently failed to keep pace with the demands placed on them. One of the more serious problems to be found with existing transonic wind tunnels is their inability to test subscale aircraft models at Reynolds numbers sufficiently near full-scale values to ensure the validity of using the wind tunnel data to predict flight characteristics. The Reynolds number capability of a wind tunnel may be increased by a number of different approaches. However, the best solution in terms of model, balance, and model support loads, as well as in terms of capital and operating cost appears to be related to the reduction of the temperature of the test gas to cryogenic temperatures. The present paper has the objective to review the evolution of the cryogenic wind tunnel concept and to describe its more important advantages.

Risk Characterization for Future Training Scenarios at the Massachusetts Military Reservation (MMR)

National Research Council Canada - National Science Library

Zakikhani, Mansour

2004-01-01

This study was conducted to evaluate potential human and ecological health risks associated with emission of pyrotechnic compounds during future training exercises at the Massachusetts Military Reservation...

Risk Characterization for Future Training Scenarios at the Massachusetts Military Reservation (MMR), Final Results

National Research Council Canada - National Science Library

Zakikhani, Mansour; Dortch, Mark S; Gerald, Jeffrey A; Hawkins, Melanie S

2005-01-01

This study was conducted to evaluate potential human and ecological health risks associated with emission of pyrotechnic compounds during future training exercises at the Massachusetts Military Reservation...

Advantages and disadvantages of stiffness instructions when studying postural control.

Science.gov (United States)

Bonnet, Cédrick T

2016-05-01

To understand the maintenance of upright stance, researchers try to discover the fundamental mechanisms and attentional resources devoted to postural control and eventually to the performance of other tasks (e.g., counting in the head). During their studies, some researchers require participants to stand as steady as possible and other simply ask participants to stand naturally. Surprisingly, a clear and direct explanation of the usefulness of the steadiness requirement seems to be lacking, both in experimental and methodological discussions. Hence, the objective of the present note was to provide advantages and disadvantages of this steadiness requirement in studies of postural control. The advantages may be to study fundamental postural control, to eliminate useless postural variability, to control spurious body motions and to control the participants' thoughts. As disadvantages, this steadiness requirement only leads to study postural control in unnatural upright stance, it changes the focus of attention (internal vs. external) and the nature of postural control (unconscious vs. conscious), it increases the difficulty of a supposedly easy control task and it eliminates or reduces the opportunity to record exploratory behaviors. When looking carefully at the four advantages of the steadiness requirement, one can believe that they are, in fact, more disadvantageous than advantageous. Overall therefore, this requirement seems illegitimate and it is proposed that researchers should not use it in the study of postural control. They may use this requirement only if they search to know the limit until which participants can consciously reduce their postural sway. Copyright © 2015 Elsevier B.V. All rights reserved.

Business Applications of WAP.

Science.gov (United States)

van Steenderen, Margaret

2002-01-01

Explains the development of WAP (wireless application protocol), how it works, and what the major advantages and disadvantages are, especially when applied to the use of information. Topics include standardization; mobile communications; the effect of WAP on business tools, electronic commerce, and information services; consumers; corporate users;…

Islamic Banking in Nigeria: Perceived Relative Advantage among ...

African Journals Online (AJOL)

We studied Islamic banking customers' segment using the religious groups in Awka, Anambra state, Nigeria to determine if there are significant differences in their mean perception of the relative advantage of Islamic banking concept. Crosstab was used to study the relationship between the demographic factors that made ...

The Employment Advantages of Skilled Urban Areas

OpenAIRE

Diaz Escobar, Ana Maria

2011-01-01

This paper explores whether the agglomeration of human capital leads to social employment advantages in urban labor markets of a developing country: Colombia. I estimate the social effects of human capital agglomeration by comparing employment opportunities of individuals located in urban areas in which the level of education differs. Results show that employment opportunities are higher on average in skilled urban areas. Three explanations have been offered: human capital externalities, prod...

COMPETITORS ACCOUNTING AS A COMPETITIVE ADVANTAGE TOOL

OpenAIRE

YÜCENURŞEN, Mehmet; DUMAN, Haluk; APAK, İbrahim; KALAV, Ömer

2016-01-01

In recent years, it seems that businesses adopt customer-oriented marketing strategies. According to the adopted strategies to keep customer satisfaction at the highest level, businesses have been focused to developt new product, to find new customers, to improve distribution and promotion activity etc. Besides, businesses have recognized that they should analize their competitor’s activity and movement to make high profit and growth. Porter's competitive advantage that it is possib...

Influence of innovation in the customer-supplier re lationship on competitive advantage

Directory of Open Access Journals (Sweden)

Božidar Lenarčič

2012-10-01

Full Text Available RQ: The excellence of a company is also the result of the relationship to the supplier. A good relationship is shown on the results in developing innovative ideas. In this study we were interested in the relations between the buyer and the supplier and how this effects their innovation development, which is later expressed as a competitive advantage, and if this relation effectson the creation of innovation ideas.Purpose: The purpose is to explore the relationship between suppliers and customers, their common innovative activity and the impact of joint innovation ideas in competitive advantage.Method: A literature review and a quantitative analysis with an opinion questionnaire was used in this study. Data analysis was carried out with frequency statistics and χ2-test.Results: The result shows that the relationship between buyers and suppliers has a greater impact on competitive advantage than the number of innovations.Organization: The research study impacts the customer-supplier relationship, mutual expectations and common creation of innovative ideas to increase competitive advantage. The results will be informative in adapting decisions and measures in strengthening the relationship for the creation of an innovative environment withininterpersonal relationships.Society: Society is aware of the importance of customer-supplier relations. Society will be able to obtain information on the degree of the customer-supplier mutual relationship in collaborating and developing innovative ideas, the level of awareness in the importance of innovation in the mutual relation of creating a competitive advantage.Originality: The originality of the research is to learn aboutthe impact of customer-supplier relations and on innovation as one of an organization’s competitive advantages.Limitations: The research is limited to one company and a smaller sample-size of suppliers in an organization.

50 CFR 86.112 - What are the advantages of doing a survey?

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false What are the advantages of doing a survey... INFRASTRUCTURE GRANT (BIG) PROGRAM How States Will Complete Access Needs Surveys § 86.112 What are the advantages of doing a survey? Surveys provide the information necessary to fully understand the needs of boaters...

LOOKING BEYOND COST LEADERSHIP AND DIFFERENTIATION IN THE QUEST FOR COMPETITIVE ADVANTAGES

Directory of Open Access Journals (Sweden)

Cristian – Liviu Vele

2012-01-01

Full Text Available The current business environment, shaped by significant changes in the consumers’ behavior and, also, by a decrease in the demand for products and services, has influenced the way in which the companies are organized and managed, making the quest for sustainable competitive advantages top priority. The companies that will be able to provide customers with superior products and services will have the highest chances of survival. While it is true that times of economic crises causes a large number of companies to exit the market, it is also true that those who manage to adapt and gain sustainable competitive advantages will not only survive, but will be able to fill in the gaps left by their competitors and thus to increase their business. This article wishes to provide a theoretical perspective on the possible sources of sustainable competitive advantages, besides Michael Porter’s cost leadership and differentiation strategies. Following this, we will show how technological innovation, time, efficient use of the resources and designing the best organizational structure can be used as sources to gain sustainable competitive advantages.

Medical applications of cyclotrons

International Nuclear Information System (INIS)

Jean, R.; Fauchet, M.

1978-01-01

Isochronous cyclotrons used to accelerate different charged particles (protons, deuterons, alphas...) at variable energies, have important medical applications, for neutron teletherapy, in vivo or in vitro activation analysis or production of short-lived radioisotopes for nuclear medicine. The characteristics of the cyclotron presently available are described for these three applications (low energy 'compact' cyclotrons, cyclotrons of intermediate and high energies), and their advantages are discussed from the points of view of the medical requirements, the financial investments and the results obtained. (orig.) [de

Energetic Materials - Technology, Manufacturing and Processing, 27th International Annual Conference of ICT June 25 - June 28, 1996 Karisruhe, Federal Republic of Germany

National Research Council Canada - National Science Library

1997-01-01

.... The 27th International ICT Annual Conference centers at the discussion of the art in research and development of modern rocket propellants, explosives, gun propellants and pyrotechnics emphasizing...

Pioneering advantage in new service development: a multi-country study of managerial perceptions

NARCIS (Netherlands)

Song, X.M.; Benedetto, Di A.C.; Song, L.

2000-01-01

Pioneering advantage in manufacturing firms has received much attention in the management and marketing literature. Few research studies, however, have been conducted to investigate the pioneering advantages and disadvantages involved in new service development, especially across several geographic

The advantages of a small European Monetary Union

OpenAIRE

Menkhoff, Lukas; Sell, Friedrich L.

1991-01-01

The question whether European Monetary Union should include all the EC countries from the start or should initially be limited to a few core countries is again being discussed more intensely. What advantages would a small EMU have from an economic point of view? Which countries should be its founder members?

Advantages and disadvantages of 3-dimensional printing in surgery: A systematic review.

Science.gov (United States)

Martelli, Nicolas; Serrano, Carole; van den Brink, Hélène; Pineau, Judith; Prognon, Patrice; Borget, Isabelle; El Batti, Salma

2016-06-01

Three-dimensional (3D) printing is becoming increasingly important in medicine and especially in surgery. The aim of the present work was to identify the advantages and disadvantages of 3D printing applied in surgery. We conducted a systematic review of articles on 3D printing applications in surgery published between 2005 and 2015 and identified using a PubMed and EMBASE search. Studies dealing with bioprinting, dentistry, and limb prosthesis or those not conducted in a hospital setting were excluded. A total of 158 studies met the inclusion criteria. Three-dimensional printing was used to produce anatomic models (n = 113, 71.5%), surgical guides and templates (n = 40, 25.3%), implants (n = 15, 9.5%) and molds (n = 10, 6.3%), and primarily in maxillofacial (n = 79, 50.0%) and orthopedic (n = 39, 24.7%) operations. The main advantages reported were the possibilities for preoperative planning (n = 77, 48.7%), the accuracy of the process used (n = 53, 33.5%), and the time saved in the operating room (n = 52, 32.9%); 34 studies (21.5%) stressed that the accuracy was not satisfactory. The time needed to prepare the object (n = 31, 19.6%) and the additional costs (n = 30, 19.0%) were also seen as important limitations for routine use of 3D printing. The additional cost and the time needed to produce devices by current 3D technology still limit its widespread use in hospitals. The development of guidelines to improve the reporting of experience with 3D printing in surgery is highly desirable. Copyright © 2016 Elsevier Inc. All rights reserved.

An analysis of Central America and Eastern Europe Revealed Comparative Advantages

Directory of Open Access Journals (Sweden)

Mauricio Garita Gutierrez

2014-03-01

Full Text Available Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0pt 5.4pt 0pt 5.4pt; mso-para-margin:0pt; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The present study applies the revealed comparative advantages through the Balassa Index to determine the comparative advantages, disadvantages, and intra-product commerce tendencies between Central America and Eastern Europe with the purpose of determining the possibility of a free trade agreement for Central America. The approach of the study is through the connection between the European Economic Union and the Central American Common market, which shares a common background and relates them to research of Bela Balassa (1965 to determine how commerce between Central America and Eastern Europe has performed and the possibilities of growth that this commerce has through a free trade agreement. The study demonstrates the importance of analyzing competitive advantages. This paper presents the difference in competitive advantage between Eastern Europe and Central American establishing the benefits when negotiating a free trade agreement between both economic blocks. Therefore, analyzing and negotiating between products of competitive advantages may lead to a more sustainable economic growth.

The advantages of digital radiography in department of radiology

International Nuclear Information System (INIS)

Mao Lijuan; Luo Xiaomei; Wu Tengfang

2009-01-01

Objective: To investigate the advantages of digital radiography in department of radiology by comparing digital radiography with common radiography. Methods: Test card was used for testing the spatial resolution of DR and common radiography. 1000 films of chest by DR and 1000 films of chest by common radiography were compared in image quality, dose of radiation, the rate of waste film, and the advantages of DR was analyzed. Results: Compared to common radiography, DR had a high sensitivity, high DQE (quantum detection efficiency), high spatial resolution and density resolution. The speed of acquisition and X-ray conversion efficiency were fast. The function of post-processing was strong and the rate of disease detection was high. Conclusion: DR is better than common radiography in all respects, it will be widely applied. (authors)

Product Market Integration, Comparative Advantages and Labour Market Performance

DEFF Research Database (Denmark)

Andersen, Torben M.; Rose Skaksen, Jan

2003-01-01

Product Market Integration, Comparative Advantages andLabour Market Performance@*In a two-country model with trade driven by comparative advantages, it is considered howimperfectly competitive labour markets are affected by lower frictions in international goodstrade. Easier goods trading...... is equivalent to increased mobility of employment acrosscountries and thus a change in the trade-off between wages and employment faced by wagesetters. While the effects of product market integration on the trade-off between wages andemployment in general is ambiguous, it is shown that product market...... integration works like ageneral improvement in productivity via the specialization it allows through trade.Unambiguously, real wages and employment and welfare improve upon reductions in tradefrictions, and therefore workers are better off irrespective of whether the market power ofunions is enhanced or muted...

Constructing regional advantage: platform policies based on related variety and differentiated knowledge bases.

NARCIS (Netherlands)

Asheim, B.T.; Boschma, R.A.; Cooke, P.

2011-01-01

Constructing regional advantage: platform policies based on related variety and differentiated knowledge bases, Regional Studies. This paper presents a regional innovation policy model based on the idea of constructing regional advantage. This policy model brings together concepts like related

The convention on supplementary compensation for nuclear damage and asian states: the advantages and disadvantages of Korea's adherence to the convention

International Nuclear Information System (INIS)

Park, K.G.

2000-01-01

This paper intends to make some assessments of the advantages and disadvantages which would result from Korea's ratification of the Convention on Supplementary Compensation for Nuclear Damage (CSC), opened for signature on 29 September 1997 in Vienna, Austria. I have presented elsewhere a view on the creation of an Asian regional regime in the event of a transboundary nuclear accident, but here I will focus on the applicability of a global regime especially to Asian States. (author)

Bio optofluidics cell sorter: cell-BOCS concept and applications

Science.gov (United States)

Roth, Tue; Glückstad, Jesper

2012-03-01

The cell-BOCS is a novel microfluidics based cell-sorting instrument utilizing next generation optical trapping technology developed at the Technical University of Denmark. It is targeted emerging bio-medical research and diagnostics markets where it for certain applications offers a number of advantages over conventional fluorescence activated cell-sorting (FACSTM) technology. Advantages include gentle handling of cells, sterile sorting, easy operation, small footprint and lower cost allowing out-of-core-facility use. Application examples are found within sorting of fragile transfected cells, high value samples and primary cell lines, where traditional FACS technology has limited application due to it's droplet-based approach to cell-sorting. In the diagnostics field, in particular applying the cell-BOCS for isolating pure populations of circulating tumor cells is an area that has generated a lot of interest.

Safety and Security Decisions in times of Economic Crisis : Establishing a Competitive Advantage

NARCIS (Netherlands)

Reniers, G.L.L.M.E.

2014-01-01

The paper argues that organisations who invest intelligently in safety and security, regardless the macroeconomic situation, will have a competitive advantage over their competitors not doing so. Establishing and maintaining a competitive advantage is all about excellence. Excellent results actually

Quantifying the advantages and disadvantages of pre-placement genetic screening.

Science.gov (United States)

Palmer, K T; Poole, J; Rawbone, R G; Coggon, D

2004-05-01

Tests of genotype may enable workers at unusual risk of future ill-health to be identified. Using them to select for employment, however, entails gains and losses to employers and employees. Ensuring a fair balance between the rights and obligations of each group requires a value judgement, but the advantages and disadvantages to interested parties must first be quantified in a meaningful way. The purposes of pre-employment screening are reviewed, and several simple measures relevant to the separate interests of employers and job applicants proposed-number screened to prevent a single adverse outcome; number excluded to prevent a case; expected incidence of the adverse outcome in those excluded; and preventable fraction. The derivation of these measures is illustrated, and the factors that influence them (the prevalence of the prognostic trait, the relative risk that it carries for an adverse outcome, and the overall incidence of disease) are related algebraically and graphically, to aid judgement on the utility of screening under different circumstances. In sensitive areas such as genetic testing the onus should be on the employer to justify plans for pre-placement screening. Several quantitative measures can be used to inform the ethical and economic debate about screening and to evaluate alternative strategies for prevention.

Advantages and challenges of dissimilar materials in automotive lightweight construction

Science.gov (United States)

Weberpals, Jan-Philipp; Schmidt, Philipp A.; Böhm, Daniel; Müller, Steffen

2015-03-01

The core of future automotive lightweight materials is the joining technology of various material mixes. The type of joining will be essential, particularly in electrified propulsion systems, especially as an improved electrical energy transmission leads to a higher total efficiency of the vehicle. The most evident parts to start the optimization process are the traction battery, the electrical performance modules and the engines. Consequently aluminum plays a very central role for lightweight construction applications. However, the physical-technical requirements of components often require the combination with other materials. Thus the joining of mixed material connections is an essential key technology for many of the current developments, for example in the areas E-Mobility, solar energy and lightweight construction. Due to these advantages mixed material joints are already established in the automotive industry and laser beam remote welding is now a focus technology for mixed material connections. The secret of the laser welding process with mixed materials lies within the different areas of the melting phase diagram depending on the mixing ratio and the cooling down rate. According to that areas with unwanted, prim, intermetallic phases arise in the fusion zone. Therefore, laser welding of mixed material connections can currently only be used with additional filler in the automotive industry.

Application of biotechnology for the domestication of Dacryodes edulis

African Journals Online (AJOL)

Biotechnology applications give a scope for rapid improvement and also facilitate the breeding program. Advantages of biotechnology application using molecular markers in breeding programs includes: study of genetic diversity, DNA fingerprinting of individuals, easy identification of specific traits or genes of interest, rapid ...

Selected environmental applications of neutron activation analysis

International Nuclear Information System (INIS)

Kucera, J.

2001-01-01

NAA is very useful for the determination of trace and minor elements in many environmental applications. While instrumental NAA (INAA) has a number of valid applications in this field, radiochemical NAA (RNAA) prior to, or post irradiation provides some significant advantages. One of the major focus points for environmental applications of NAA is to assess the magnitude of various pollutants. This paper discusses doing this via two methods, namely air monitoring and biological monitoring. (author)

Applications of selfshielded electron processors in industry 1987

International Nuclear Information System (INIS)

Nablo, S.V.

1988-01-01

Many new applications of the selfshielded electron processor have emerged over the past 5 years which continue to demonstrate the advantages and practical problems associated with these efficient, compact energy sources. Many of these, such as for the curing of: binders for abrasive products, binders for magnetic media, binders for textile flocking, silicone coatings for release papers, etc., offer good prospects for growth but are thusfar in limited use. With this ever broadening base of process technology, the prospects remain 'bullish' for the expanded industrial use of these new energy sources. With their unrivalled process off-licences and high throughputs, improved appreciation of their advantageous economics assures expanded application in an increasingly energy/environmentally concerned world economy(author)

Application of plasma technology to nuclear engineering fields

International Nuclear Information System (INIS)

Suzuki, Masaaki; Akatsuka, Hiroshi

1996-01-01

In order to discuss about the application of the plasma technology to nuclear engineering fields, we mention two subjects, the oxygenation of metal chloride waste by oxygen plasma and the characterization of fine particles generated in the plasma process. Through the experimental results of two subjects, both of the advantage and the disadvantage of the plasma technology and their characteristics are shown and discussed. The following conclusions are obtained. The reactive plasma is effective to oxygenate the chloride wastes. The particle generation which is one of the disadvantages must not be specialized and its characteristics can be estimated. Consequently, the plasma technology should be applicable to nuclear engineering fields adopting its advantage and overcoming its disadvantage. (author)

Competitive Advantages of Indonesian Plywood Industry: A Perspective from Porter???s Five Forces Model

OpenAIRE

Makkarennu

2015-01-01

The Understanding industry structure is of great concern to industry strategic since depending against the competitive forces and shaping them in a company???s favor area essential to strategy. Competitive advantages provide the framework for assessing strategy and understanding the source of competitive advantage. This paper applies Porter Five Forces Model to identify the positioning of competitive advantages of plywood industry in South Sulawesi, Indonesia. Qualitative research was carried...

Adaptation to the International Business Environment: A Resource Advantage Perspective

Directory of Open Access Journals (Sweden)

Manuel Portugal Ferreira

2008-01-01

Full Text Available This paper discusses the importance of the adaptation of the firm to the International Business Environment. Using concepts from the literature on resource advantage, we posit that the firms' adaptation capability to different International Business Environments is a valuable, difficult to imitate, non-tradeable, rare butnot scarce and path dependent resource. We further suggest that adaptation to International Business Environment is a non-substitutable core source of competitive advantage for the multinational enterprises, developed over time through the firms experiences and built into their routines. In line with this argument, some propositions are formulated. We conclude with a broad discussion and suggesting some avenues for future research\\.

ADVANTAGES/DISADVANTAGES FOR ISCO METHODS IN-SITU FENTON OXIDATION IN-SITU PERMANGANATE OXIDATION

Science.gov (United States)

The advantages and disadvantages of in-situ Fenton oxidation and in-situ permanganate oxidation will be presented. This presentation will provide a brief overview of each technology and a detailed analysis of the advantages and disadvantages of each technology. Included in the ...

Physical Methods for Seed Invigoration: Advantages and Challenges in Seed Technology.

Science.gov (United States)

Araújo, Susana de Sousa; Paparella, Stefania; Dondi, Daniele; Bentivoglio, Antonio; Carbonera, Daniela; Balestrazzi, Alma

2016-01-01

In the context of seed technology, the use of physical methods for increasing plant production offers advantages over conventional treatments based on chemical substances. The effects of physical invigoration treatments in seeds can be now addressed at multiple levels, ranging from morpho-structural aspects to changes in gene expression and protein or metabolite accumulation. Among the physical methods available, "magneto-priming" and irradiation with microwaves (MWs) or ionizing radiations (IRs) are the most promising pre-sowing seed treatments. "Magneto-priming" is based on the application of magnetic fields and described as an eco-friendly, cheap, non-invasive technique with proved beneficial effects on seed germination, vigor and crop yield. IRs, as γ-rays and X-rays, have been widely regarded as a powerful tool in agricultural sciences and food technology. Gamma-rays delivered at low dose have showed to enhance germination percentage and seedling establishment, acting as an actual 'priming' treatment. Different biological effects have been observed in seeds subjected to MWs and X-rays but knowledge about their impact as seed invigoration agent or stimulatory effects on germination need to be further extended. Ultraviolet (UV) radiations, namely UV-A and UV-C have shown to stimulate positive impacts on seed health, germination, and seedling vigor. For all mentioned physical treatments, extensive fundamental and applied research is still needed to define the optimal dose, exposition time, genotype- and environment-dependent irradiation conditions. Electron paramagnetic resonance has an enormous potential in seed technology not fully explored to monitor seed invigoration treatments and/or identifying the best suitable irradiation dose or time-point to stop the treatment. The present manuscript describes the use of physical methods for seed invigoration, while providing a critical discussion on the constraints and advantages. The future perspectives related to

Physical Methods for Seed Invigoration: Advantages and Challenges in Seed Technology

Science.gov (United States)

Araújo, Susana de Sousa; Paparella, Stefania; Dondi, Daniele; Bentivoglio, Antonio; Carbonera, Daniela; Balestrazzi, Alma

2016-01-01

In the context of seed technology, the use of physical methods for increasing plant production offers advantages over conventional treatments based on chemical substances. The effects of physical invigoration treatments in seeds can be now addressed at multiple levels, ranging from morpho-structural aspects to changes in gene expression and protein or metabolite accumulation. Among the physical methods available, “magneto-priming” and irradiation with microwaves (MWs) or ionizing radiations (IRs) are the most promising pre-sowing seed treatments. “Magneto-priming” is based on the application of magnetic fields and described as an eco-friendly, cheap, non-invasive technique with proved beneficial effects on seed germination, vigor and crop yield. IRs, as γ-rays and X-rays, have been widely regarded as a powerful tool in agricultural sciences and food technology. Gamma-rays delivered at low dose have showed to enhance germination percentage and seedling establishment, acting as an actual ‘priming’ treatment. Different biological effects have been observed in seeds subjected to MWs and X-rays but knowledge about their impact as seed invigoration agent or stimulatory effects on germination need to be further extended. Ultraviolet (UV) radiations, namely UV-A and UV-C have shown to stimulate positive impacts on seed health, germination, and seedling vigor. For all mentioned physical treatments, extensive fundamental and applied research is still needed to define the optimal dose, exposition time, genotype- and environment-dependent irradiation conditions. Electron paramagnetic resonance has an enormous potential in seed technology not fully explored to monitor seed invigoration treatments and/or identifying the best suitable irradiation dose or time-point to stop the treatment. The present manuscript describes the use of physical methods for seed invigoration, while providing a critical discussion on the constraints and advantages. The future perspectives

Physical methods for seed vigourization: advantages and challenges in seed technology

Directory of Open Access Journals (Sweden)

Susana eAraújo

2016-05-01

Full Text Available In the context of seed technology, the use of physical methods for increasing plant production offers advantages over conventional treatments based on chemical substances. The effects of physical vigourization treatments in seeds can be now addressed at multiple levels, ranging from morpho-structural aspects to changes in gene expression and protein or metabolite accumulation. Among the physical methods available, magneto-priming and irradiation with microwaves or ionizing radiations are the most promissory pre-sowing seed treatments. Magneto-priming is based on the application of magnetic fields and described as an eco-friendly, cheap, non-invasive technique with proved beneficial effects on seed germination, vigour and crop yield. Ionizing radiations, as gamma-rays and X-rays, have been widely regarded as a powerful tool in agricultural sciences and food technology. Gamma-rays delivered at low dose have showed to enhance germination percentage and seedling establishment, acting as an actual ‘priming’ treatment. Different biological effects have been observed in seeds subjected to microwaves and X-rays but knowledge about their impact as seed vigourization agent or stimulatory effects on germination need to be further extended. Ultraviolet (UV radiations, namely UV-A and UV-C have shown to stimulate positive impacts on seed health, germination and seedling vigour. For all mentioned physical treatments, extensive fundamental and applied research is still needed to define the optimal dose, exposition time, genotype- and environment-dependent irradiation conditions. Electron paramagnetic resonance (EPR has an enormous potential in seed technology not fully explored to monitor seed vigourization treatments and/or identifying the best suitable irradiation dose or time-point to stop the treatment. The present manuscript describes the use of physical methods for seed vigourization, while providing a critical discussion on the constraints and

Smart City as Framework for Creating Competitive Advantages in International Business Management

Directory of Open Access Journals (Sweden)

Adam Sofronijević

2014-07-01

Full Text Available The paper presents the essence of the Smart City concept and opportunities for the creation of competitive advantages arising in the framework generated by this concept. Various elements of a Smart City are analysed and related to different options for economic growth and business innovation improvement. Possibilities arising from networking and clustering in Creative Cities are listed along with some details of advantages provided by a symbiosis of information and communication technologies and creativity to companies operating in such environments. Managerial aspects of the Internet of Things are presented and identified as a basis for the Smart City outlook, but also as a major prospect to develop certain business opportunities leading to competitive advantages for companies operating out of smart cities.

Characteristics of semiconductor bridge (SCB) plasma generated in a micro-electro-mechanical system (MEMS)

International Nuclear Information System (INIS)

Kim, Jong-Uk; Park, Chong-Ook; Park, Myung-Il; Kim, Sun-Hwan; Lee, Jung-Bok

2002-01-01

Plasma ignition method has been applied in various fields particularly to the rocket propulsion, pyrotechnics, explosives, and to the automotive air-bag system. Ignition method for those applications should be safe and also operate reliably in hostile environments such as; electromagnetic noise, drift voltage, electrostatic background and so on. In the present Letter, a semiconductor bridge (SCB) plasma ignition device was fabricated and its plasma characteristics including the propagation speed of the plasma, plasma size, and plasma temperature were investigated with the aid of the visualization of micro scale plasma (i.e., ≤350 μm), which generated from a micro-electro-mechanical poly-silicon semiconductor bridge (SCB)

Selection application for platforms and security protocols suitable for wireless sensor networks

International Nuclear Information System (INIS)

Moeller, S; Newe, T; Lochmann, S

2009-01-01

There is a great number of platforms and security protocols which can be used for wireless sensor networks (WSN). All these platforms and protocols have different properties with certain advantages and disadvantages. For a good choice of platform and an associated protocol, these advantages and disadvantages should be compared and the best for the appropriate WSN chosen. To select a Security protocol and a wireless platform suitable for a specific application a software tool will be developed. That tool will enable wireless network deployment engineers to easily select a suitable wireless platform for their application based on their network needs and application security requirements.

Human Resources as a Competitive Advantage of Travel Agencies in Montenegro

Directory of Open Access Journals (Sweden)

Aleksa Vučetić

2012-04-01

Full Text Available Human resources in travel agencies represent an especially valuable resource, which possesses the multidisciplinary and highly specialized knowledge and skills in the field of selective tourism. Human resources enable the agencies to create the services and products of superior value for the consumers within market niches, and thereby significantly contribute to increase in profitability of agencies, thereby becoming an important factor in competitive advantage of the agencies. Research results enable identification of the relation between human resources and servicing of travel agencies market niches. The paper presents an analysis of travel agencies’ human resources from the aspect of competitive advantage, with a special overview of their role in the domain of offer development and servicing of consumers in various types of selective tourism. The goal of the research is to prove, on a scientific basis, that the human resources represent a very important factor of competitive advantage of travel agencies.

Peran Strategic Entrepreneurship Dalam Membangun Sustainable Competitive Advantage

OpenAIRE

Handrimurtjahjo, Agustinus Dedy

2014-01-01

Strategic entrepreneurship has emerged as a new concept in examining convergence in entrepreneurship studies (opportunity-seeking behavior) and strategic management (advantage-seeking behavior). Studies in the area of strategic management have gradually exposed the relationship betweenstrategic management and entrepreneurship: entrepreneurial strategy making; intrapreneurship; entrepreneurial strategic posture within organizations; entrepreneurial orientation; strategic managementintegration ...

Application of expert systems

Energy Technology Data Exchange (ETDEWEB)

Basden, A

1983-11-01

This article seeks to bring together a number of issues relevant to the application of expert systems by discussing their advantages and limitations, their roles and benefits, and the influence that real-life applications might have on the design of expert systems software. Part of the expert systems strategy of one major chemical company is outlined. Because it was in constructing one particular expert system that many of these issues became important this system is described briefly at the start of the paper and used to illustrate much of the later discussion. It is of the plausible-inference type and has application in the field of materials engineering. 22 references.

Extreme Quantum Memory Advantage for Rare-Event Sampling

Science.gov (United States)

Aghamohammadi, Cina; Loomis, Samuel P.; Mahoney, John R.; Crutchfield, James P.

2018-02-01

We introduce a quantum algorithm for memory-efficient biased sampling of rare events generated by classical memoryful stochastic processes. Two efficiency metrics are used to compare quantum and classical resources for rare-event sampling. For a fixed stochastic process, the first is the classical-to-quantum ratio of required memory. We show for two example processes that there exists an infinite number of rare-event classes for which the memory ratio for sampling is larger than r , for any large real number r . Then, for a sequence of processes each labeled by an integer size N , we compare how the classical and quantum required memories scale with N . In this setting, since both memories can diverge as N →∞ , the efficiency metric tracks how fast they diverge. An extreme quantum memory advantage exists when the classical memory diverges in the limit N →∞ , but the quantum memory has a finite bound. We then show that finite-state Markov processes and spin chains exhibit memory advantage for sampling of almost all of their rare-event classes.

Extreme Quantum Memory Advantage for Rare-Event Sampling

Directory of Open Access Journals (Sweden)

Cina Aghamohammadi

2018-02-01

Full Text Available We introduce a quantum algorithm for memory-efficient biased sampling of rare events generated by classical memoryful stochastic processes. Two efficiency metrics are used to compare quantum and classical resources for rare-event sampling. For a fixed stochastic process, the first is the classical-to-quantum ratio of required memory. We show for two example processes that there exists an infinite number of rare-event classes for which the memory ratio for sampling is larger than r, for any large real number r. Then, for a sequence of processes each labeled by an integer size N, we compare how the classical and quantum required memories scale with N. In this setting, since both memories can diverge as N→∞, the efficiency metric tracks how fast they diverge. An extreme quantum memory advantage exists when the classical memory diverges in the limit N→∞, but the quantum memory has a finite bound. We then show that finite-state Markov processes and spin chains exhibit memory advantage for sampling of almost all of their rare-event classes.

Systems neuroscience in Drosophila: Conceptual and technical advantages.

Science.gov (United States)

Kazama, H

2015-06-18

The fruit fly Drosophila melanogaster is ideally suited for investigating the neural circuit basis of behavior. Due to the simplicity and genetic tractability of the fly brain, neurons and circuits are identifiable across animals. Additionally, a large set of transgenic lines has been developed with the aim of specifically labeling small subsets of neurons and manipulating them in sophisticated ways. Electrophysiology and imaging can be applied in behaving individuals to examine the computations performed by each neuron, and even the entire population of relevant neurons in a particular region, because of the small size of the brain. Moreover, a rich repertoire of behaviors that can be studied is expanding to include those requiring cognitive abilities. Thus, the fly brain is an attractive system in which to explore both computations and mechanisms underlying behavior at levels spanning from genes through neurons to circuits. This review summarizes the advantages Drosophila offers in achieving this objective. A recent neurophysiology study on olfactory behavior is also introduced to demonstrate the effectiveness of these advantages. Copyright © 2014 IBRO. Published by Elsevier Ltd. All rights reserved.