Criteria for waste-related risks to be below regulatory concern

International Nuclear Information System (INIS)

Trubatch, S.L.

1986-01-01

This paper describes and analyzes the criteria recently established by the US Court of Appeals for the District of Columbia Circuit for determining that a risk is de minimis, i.e., below regulatory concern (BRC), for the purpose of the Atomic Energy Act of 1954, as amended, 42 USC 2011 et seq. The court established these BRC criteria incidentally during its review of intervenors' challenge to the US Nuclear Regulatory Commission's (NRC's) issuance of an operating license for the Diablo Canyon Nuclear Power Plant. In the course of that licensing proceeding, the NRC had determined that its regulations did not require it to consider the complicating effects of earthquakes on emergency planning. Although the legal standard and its quantitation arose in the context of emergency planning, these criteria are equally applicable to waste-related risks cognizable under the Atomic Energy Act. These criteria imply that the NRC, when licensing a waste repository, need not consider the risk of a catastrophic accident having a frequency of occurrence of less than one chance in one hundred thousand per year

Development and implementation of attractiveness Level E criteria and the plutonium disposition methodology

International Nuclear Information System (INIS)

Christensen, D.C.; Robinson, M.A.

1998-03-01

Historically, the Department of Energy used the Economic Discard Limits (EDLs), those Special Nuclear Material (SNM) concentrations in residue matrices below which production of new SNM was more economic than SNM recovery, as a basis for discard decisions. In 1994, a joint team from DOE Defense Programs (DP) and Environmental Management (EM) determined that the EDLs were no longer a valid discriminator and directed that SNM disposition consider instead 12 specific criteria, foremost of which are waste minimization, environmental impacts, safety, proliferation concerns, and cost. In response, the Los Alamos National Laboratory developed a technical basis for determining SNM bearing materials unattractive for proliferation purposes and a quantitative method for predicting materials disposition consequences as a basis for decision making called the plutonium disposition methodology. The objective of attractiveness Level E criteria is to insure that waste is unattractive for proliferation or terrorist purposes. Level E criteria is about 0.17 kg Pu per 208 liter drum (requiring diversion of a minimum of 54 drums, assuming 100% recovery efficiency)

Development of iPad application "Postima" for quantitative analysis of the effects of manual therapy

Science.gov (United States)

Sugiyama, Naruhisa; Shirakawa, Tomohiro

2017-07-01

The technical difficulty of diagnosing joint misalignment and/or dysfunction by quantitative evaluation is commonly acknowledged among manual therapists. Usually, manual therapists make a diagnosis based on a combination of observing patient symptoms and performing physical examinations, both of which rely on subjective criteria and thus contain some uncertainty. We thus sought to investigate the correlations among posture, skeletal misalignment, and pain severity over the course of manual therapy treatment, and to explore the possibility of establishing objective criteria for diagnosis. For this purpose, we developed an iPad application that realizes the measurement of patients' postures and analyzes them quantitatively. We also discuss the results and effectiveness of the measurement and analysis.

Criteria for definition of regional functional improvement on quantitative post-stress gated myocardial SPET after bypass surgery in patients with ischaemic cardiomyopathy

International Nuclear Information System (INIS)

Lee, Dong Soo; Cheon, Gi Jeong; Paeng, Jin Chul; Chung, June-Key; Lee, Myung Chul; Kim, Ki Bong

2002-01-01

Myocardial viability can be defined as functional improvement of dysfunctional myocardium after revascularization. The purpose of this study was to define the optimal criteria for definition of regional functional improvement after coronary artery bypass graft (CABG) surgery on quantitative gated single-photon emission tomography (SPET). Thirty-two patients (26 men, 6 women; age 56±13 years) with coronary artery disease (three-vessel disease, 17; two-vessel disease, 15; previous history of myocardial infarction, 9) and severe left ventricular dysfunction (LVEF≤35%) underwent CABG. Rest thallium-201/dipyridamole stress technetium-99m methoxyisobutylisonitrile gated myocardial SPET was performed before and 3 months after CABG. Global LV functional improvement was defined as either an improvement in LVEF of 10% (n=15) or an improvement in LVEF of 5% combined with a decrease in end-systolic volume of 10 ml (n=2) after CABG on quantitative gated SPET. Postoperative regional wall thickening improvement (ΔRWT), regional wall motion improvement (ΔRWM) and regional resting (ΔRP) and stress perfusion improvement (ΔRstrP) were used to determine global functional improvement by ROC curve analysis, and the optimal criteria for definition of viable regional dysfunctional myocardium were defined on the ROC curves. Correlations were verified by determining the number of improved myocardial regions and LVEF improvement. LVEF was improved from 25%±6% to 34%±11% after CABG. A total of 229 segments were dysfunctional (wall motion ≤2 mm, thickening ≤20%) before CABG. On ROC curve analysis using global functional improvement as an indicator of viability, the areas under the ROC curves (AUCs) of ΔRWT and ΔRWM were 0.717 and 0.620, respectively. The AUC of ΔRWT was significantly larger than that of ΔRWM (P=0.009) and the optimal cut-off value of ΔRWT was 15%. The AUCs of ΔRP and ΔRstrP were not significant. The correlation coefficients between summed ΔRWT and �

Waste-acceptance criteria for greater confinement disposal

International Nuclear Information System (INIS)

Gilbert, T.L.; Meshkov, N.K.

1987-01-01

A methodology for establishing waste-acceptance criteria based on quantitative performance factors that characterize the confinement capabilities of a waste disposal site and facility has been developed. The methodology starts from the basic objective of protecting public health and safety by providing assurance that disposal of the waste will not result in a radiation dose to any member of the general public, in either the short or long term, in excess of an established basic dose limit. The method is based on an explicit, straight-forward, and quantitative relationship among individual risk, confinement capabilities, and waste characteristics. A key aspect of the methodology is introduction of a confinement factor that characterizes the overall confinement capability of a particular facility and can be used for quantitative assessments of the performance of different disposal sites and facilities, as well as for establishing site-specific waste acceptance criteria. Confinement factors are derived by means of site-specific pathway analyses. They make possible a direct and simple conversion of a basic dose limit into waste-acceptance criteria, specified as concentration limits on radionuclides in the waste streams and expressed in quantitative form as a function of parameters that characterize the site, facility design, waste containers, and waste form. Waste acceptance criteria can be represented visually as activity/time plots for various waste streams. These plots show the concentrations of radionuclides in a waste stream as a function of time and permit a visual, quantitative assessment of long-term performance, relative risks from different radionuclides in the waste stream, and contributions from ingrowth. 13 references, 7 figures

Waste-acceptance criteria for greater-confinement disposal

International Nuclear Information System (INIS)

Gilbert, T.L.; Meshkov, N.K.

1986-01-01

A methodology for establishing waste-acceptance criteria based on quantitative performance factors that characterize the confinement capabilities of a waste-disposal site and facility has been developed. The methodology starts from the basic objective of protecting public health and safety by providing assurance that dispsoal of the waste will not result in a radiation dose to any member of the general public, in either the short or long term, in excess of an established basic dose limit. The method is based on an explicit, straightforward, and quantitative relationship among individual risk, confinement capabilities, and waste characteristics. A key aspect of the methodology is the introduction of a confinement factor that characterizes the overall confinement capability of a particular facility and can be used for quantitative assessments of the performance of different disposal sites and facilities, as well as for establishing site-specific waste-acceptance criteria. Confinement factors are derived by means of site-specific pathway analyses. They make possible a direct and simple conversion of a basic dose limit into waste-acceptance criteria, specified as concentration limits on radionuclides in the waste streams and expressed in quantitative form as a function of parameters that characterize the site, facility design, waste containers, and waste form. Waste-acceptance criteria can be represented visually as activity/time plots for various waste streams. These plots show the concentrations of radionuclides in a waste stream as a function of time and permit a visual, quantitative assessment of long-term performance, relative risks from different radionuclides in the waste stream, and contributions from ingrowth. 13 refs

Developing 2 C-compatible investment criteria

Energy Technology Data Exchange (ETDEWEB)

Roeser, Frauke [NewClimate - Institute for Climate Policy and Global Sustainability gGmbH, Bonn (Germany); Weischer, Lutz [Germanwatch e.V., Koeln (Germany); Thomae, Jakob [2degrees Investing Initiative, New York, NY (United States); Hoehne, Niklas; Hagemann, Markus; El Alaoui, Alexander; Bals, Christoph; Eckstein, David; Kreft, Soenke; Rosse, Morten

2015-11-30

This report studies the development of criteria for assessing the compatibility of financial investments with the international goal to limit global temperature increase to below 2 C above pre-industrial levels. The findings are intended as a starting point and a key input for a longer term process to develop consensus-based 2 C investing criteria. The focus here is placed on investments in projects and physical assets, in particular of development and climate finance organisations. In order to limit global temperature increase to 2 C, global greenhouse gas (GHG) emissions will have to be reduced significantly, eventually to zero, during the course of this century. This requires shifting capital from high to low carbon investments as well as significant capital mobilisation for investments in 2 C-compatible infrastructure. Given the long lifetime of physical assets, and the urgency of decarbonisation over the coming decades, this needs to begin today. Public financial institutions can play a prominent role in contributing to aligning investment flows with the 2 C limit, as well as in closing the current infrastructure investment gap, responding to their explicit or implicit climate mandates and leadership role in the finance sector. The majority of international financial institutions integrate climate considerations into their finance decisions to some degree, and are familiar with different types of criteria, including positive and negative lists, qualitative and quantitative benchmarks, and the use of shadow carbon pricing. However, current approaches do not link to the 2 C limit. 2 C investment criteria are therefore needed to guide investors in this regard. Such criteria may also support other purposes, including an understanding of climate risks and improved reporting and accountability.

Developing 2 C-compatible investment criteria

International Nuclear Information System (INIS)

Roeser, Frauke; Weischer, Lutz; Thomae, Jakob; Hoehne, Niklas; Hagemann, Markus; El Alaoui, Alexander; Bals, Christoph; Eckstein, David; Kreft, Soenke; Rosse, Morten

2015-01-01

This report studies the development of criteria for assessing the compatibility of financial investments with the international goal to limit global temperature increase to below 2 C above pre-industrial levels. The findings are intended as a starting point and a key input for a longer term process to develop consensus-based 2 C investing criteria. The focus here is placed on investments in projects and physical assets, in particular of development and climate finance organisations. In order to limit global temperature increase to 2 C, global greenhouse gas (GHG) emissions will have to be reduced significantly, eventually to zero, during the course of this century. This requires shifting capital from high to low carbon investments as well as significant capital mobilisation for investments in 2 C-compatible infrastructure. Given the long lifetime of physical assets, and the urgency of decarbonisation over the coming decades, this needs to begin today. Public financial institutions can play a prominent role in contributing to aligning investment flows with the 2 C limit, as well as in closing the current infrastructure investment gap, responding to their explicit or implicit climate mandates and leadership role in the finance sector. The majority of international financial institutions integrate climate considerations into their finance decisions to some degree, and are familiar with different types of criteria, including positive and negative lists, qualitative and quantitative benchmarks, and the use of shadow carbon pricing. However, current approaches do not link to the 2 C limit. 2 C investment criteria are therefore needed to guide investors in this regard. Such criteria may also support other purposes, including an understanding of climate risks and improved reporting and accountability.

Nine Criteria for a Measure of Scientific Output

Science.gov (United States)

Kreiman, Gabriel; Maunsell, John H. R.

2011-01-01

Scientific research produces new knowledge, technologies, and clinical treatments that can lead to enormous returns. Often, the path from basic research to new paradigms and direct impact on society takes time. Precise quantification of scientific output in the short-term is not an easy task but is critical for evaluating scientists, laboratories, departments, and institutions. While there have been attempts to quantifying scientific output, we argue that current methods are not ideal and suffer from solvable difficulties. Here we propose criteria that a metric should have to be considered a good index of scientific output. Specifically, we argue that such an index should be quantitative, based on robust data, rapidly updated and retrospective, presented with confidence intervals, normalized by number of contributors, career stage and discipline, impractical to manipulate, and focused on quality over quantity. Such an index should be validated through empirical testing. The purpose of quantitatively evaluating scientific output is not to replace careful, rigorous review by experts but rather to complement those efforts. Because it has the potential to greatly influence the efficiency of scientific research, we have a duty to reflect upon and implement novel and rigorous ways of evaluating scientific output. The criteria proposed here provide initial steps toward the systematic development and validation of a metric to evaluate scientific output. PMID:22102840

Quantitative criteria in the application of the principle of precaution

International Nuclear Information System (INIS)

Touzet, Rodolfo; Ferrari, Jorge

2008-01-01

Full text: The Principle of Precaution establishes that 'when an activity represents a threat or damage for the human health or the environment, it is necessary to take measurements of precaution even when it could not have demonstrated the cause-effect relationship in a scientific and conclusive form'. This declaration implies acting even in presence of uncertainty, deriving the responsibility and the safety to who creates the risk, to analyze the possible alternatives and to use participate methods to take decisions. This presents practically two dilemmas: 1) How to perform a cost-benefit analysis when the relation cause-effect is not even established for the health of the exposed persons? (In case of ionizing radiations a factor α is in use, that represents the economic cost of the dose received by a person); 2) Which criterion must to be used in case of ionizing radiation act synergically with non ionizing radiation? How to integrate the quantitative optimization criterion with a qualitative criterion of precaution?. It will have to appear some temporary hypotheses in order to be able to perform the quantitative corresponding evaluations. In case of the low frequencies the situation was exactly the same in the past; but the epidemiological studies as well as the experiments in vivo and in vitro demonstrated that the exposure can increase the risk of leukaemia in children and induce other problems of health in children and adults. A temporary possible hypothesis for radio frequency is to assume that the effects are similar in magnitude to the ones caused for the fields of low frequency. In this case it is possible to demonstrate that if this was really like that the statistics would not allow to demonstrate it even due to the persons' quantity and the times used in the studied populations and the times of latency of the leukaemia. The use of some hypothesis of work to perform the cost - benefit studies allow us to establish different alternatives for the

About quantitative criteria of radiation pathomorphism in concentrated preoperative irradiation of rectum cancer

International Nuclear Information System (INIS)

Kanaev, S.V.; Saveleva, O.P.; Serov, S.F.; Melnikov, R.A.; Frolova, Z.V.; Neushtadt, A.L.; Korkhov, V.V.; Ovanesyan, T.L.

1983-01-01

Two groups of patients were involved in the study. In the first group (22 observations) radiation treatment was applied 4 times every other day with a single focal dose of 6 Gy (the total tumor dose 24 to 30 Gy, 1400 to 1600 NSD units, 70 to 85 TDF units). The interval between the beginning of irradiation and surgery was usually 15 to 20 days. In the second group (12 observations) radiation was applied 4 times with a daily single dose of 5 Gy (total tumor dose 20 Gy, 1140 NSD units, 20 TDF units). Surgery was performed 24 to 48 hours after the completion of radiation treatment. The so-called tumor damage index M+-m was 36%+-4.8% in the first group, and 21%+-4.4% in the second group. The mitotic index decreased twice in the first group, and in the second group it dropped to zero. The obtained data demonstrate that in different schemes of radiation dose fractionation, morphological changes observed in irradiated rectal adenocarcinomas are far from being similar. For an objective evaluation of the changes different quantitative morphological criteria are needed. (author)

Can qualitative and quantitative methods serve complementary purposes for policy research?

OpenAIRE

Maxwell, Daniel G.

1998-01-01

Qualitative and quantitative methods in social science research have long been separate spheres with little overlap. However, recent innovations have highlighted the complementarity of qualitative and quantitative approaches. The Accra Food and Nutrition Security Study was designed to incorporate the participation of a variety of constituencies in the research, and to rely on a variety of approaches — both qualitative and quantitative — to data collection and analysis. This paper reviews the ...

Fine mapping quantitative trait loci under selective phenotyping strategies based on linkage and linkage disequilibrium criteria

DEFF Research Database (Denmark)

Ansari-Mahyari, S; Berg, P; Lund, M S

2009-01-01

disequilibrium-based sampling criteria (LDC) for selecting individuals to phenotype are compared to random phenotyping in a quantitative trait loci (QTL) verification experiment using stochastic simulation. Several strategies based on LAC and LDC for selecting the most informative 30%, 40% or 50% of individuals...... for phenotyping to extract maximum power and precision in a QTL fine mapping experiment were developed and assessed. Linkage analyses for the mapping was performed for individuals sampled on LAC within families and combined linkage disequilibrium and linkage analyses was performed for individuals sampled across...... the whole population based on LDC. The results showed that selecting individuals with similar haplotypes to the paternal haplotypes (minimum recombination criterion) using LAC compared to random phenotyping gave at least the same power to detect a QTL but decreased the accuracy of the QTL position. However...

Validation criteria of an internal dosimetry laboratory in vivo

International Nuclear Information System (INIS)

Alfaro L, M. de las M.

2014-10-01

People working with radioactive materials, under certain circumstances (e.g. not using the proper protective equipment, an incident not covered, etc.) could be incorporated into the body. The radiation protection programs include direct measurement methods -in vivo- or indirect -in vitro- or both, to know that radioactive material is incorporated into the body. The monitoring measurements of internal contamination or (Radio-bioassay) are carried out with the purpose of determining the amount of radioactive material incorporated in the body; estimate the effective dose and committed dose; management administration of radiation protection; appropriate medical management; and to provide the data necessary for the legal requirements and the preservation of records. The measurement methods used in the monitoring of internal contamination must be validated by the combination of the following processes: calibration, using standards reference materials and/or simulators; execute systematic research, using control samples; and intercomparison between laboratories and performance tests. In this paper the validation criteria of an internal dosimetry laboratory in vivo are presented following the information provided by the standard ANSI N13-30-1996 and ISO/TEC 17025-2005 as are the criteria of facilities, staff training, interpretation of measurements, performance criteria for monitoring of internal contamination in vivo, results reporting and records retention. Thereby we achieve standardized quantitative performance criteria of truthfulness, accuracy and detection limit and a consensus on statistical definitions to establish the validation plan of a monitoring laboratory of internal contamination in vivo. (Author)

IMRT QA: Selecting gamma criteria based on error detection sensitivity

Energy Technology Data Exchange (ETDEWEB)

Steers, Jennifer M. [Department of Radiation Oncology, Cedars-Sinai Medical Center, Los Angeles, California 90048 and Physics and Biology in Medicine IDP, David Geffen School of Medicine, University of California, Los Angeles, Los Angeles, California 90095 (United States); Fraass, Benedick A., E-mail: benedick.fraass@cshs.org [Department of Radiation Oncology, Cedars-Sinai Medical Center, Los Angeles, California 90048 (United States)

2016-04-15

Purpose: The gamma comparison is widely used to evaluate the agreement between measurements and treatment planning system calculations in patient-specific intensity modulated radiation therapy (IMRT) quality assurance (QA). However, recent publications have raised concerns about the lack of sensitivity when employing commonly used gamma criteria. Understanding the actual sensitivity of a wide range of different gamma criteria may allow the definition of more meaningful gamma criteria and tolerance limits in IMRT QA. We present a method that allows the quantitative determination of gamma criteria sensitivity to induced errors which can be applied to any unique combination of device, delivery technique, and software utilized in a specific clinic. Methods: A total of 21 DMLC IMRT QA measurements (ArcCHECK®, Sun Nuclear) were compared to QA plan calculations with induced errors. Three scenarios were studied: MU errors, multi-leaf collimator (MLC) errors, and the sensitivity of the gamma comparison to changes in penumbra width. Gamma comparisons were performed between measurements and error-induced calculations using a wide range of gamma criteria, resulting in a total of over 20 000 gamma comparisons. Gamma passing rates for each error class and case were graphed against error magnitude to create error curves in order to represent the range of missed errors in routine IMRT QA using 36 different gamma criteria. Results: This study demonstrates that systematic errors and case-specific errors can be detected by the error curve analysis. Depending on the location of the error curve peak (e.g., not centered about zero), 3%/3 mm threshold = 10% at 90% pixels passing may miss errors as large as 15% MU errors and ±1 cm random MLC errors for some cases. As the dose threshold parameter was increased for a given %Diff/distance-to-agreement (DTA) setting, error sensitivity was increased by up to a factor of two for select cases. This increased sensitivity with increasing dose

23 CFR 1313.2 - Purpose.

Science.gov (United States)

2010-04-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION INCENTIVE GRANT CRITERIA FOR ALCOHOL-IMPAIRED DRIVING PREVENTION PROGRAMS § 1313.2 Purpose. The purpose of this part is to encourage States to adopt and implement effective programs to reduce traffic safety problems resulting from individuals driving motor...

An evaluation of the predictive value of mid-treatment 18F-FDG-PET/CT scans in pediatric lymphomas and undefined criteria of abnormality in quantitative analysis.

Science.gov (United States)

Zhu, Hongyun J; Halkar, Raghuveer; Alavi, Abass; Goris, Michael L

2013-01-01

Our purpose was to evaluate quantitative mid-treatment fluorine-18-fluorodeoxyglucose (18F-FDG) PET/CT scans in predicting the quantitative result of the end of treatment 18F-FDG PET/CT scan. With approval of Emory's Institutional Review Board, data were extracted from 273 existing 18F-FDG PET/CT scans of 143 pediatric patients performed for evaluation of lymphoma. The inclusion criteria were the availability of an initial staging scan (D0) and a mid-treatment scan after 1 to 3 cycles of chemotherapy (D1) and a post-treatment scan (D2). Absolute and relative changed of D1 compared to D0 were measured and their values in predicting D3 values were determined. Analysis was performed on a lesion basis (N=78) in 18 patients with an average of 4.3 lesions per patients. Results showed that the predictive value depended on the value selected as significant for the predictors (D1 SUV and D1 %SUV), and on the limit between negative and positive selected for the predicted value D2 SUV. If the maximum SUV3.0, the positive predictive value of D1>4 was 100%. In that way outcome was predictable with absolute certainty in as many as 71% of the lesions with a single limit for D1 and D2. In conclusion, in this limited retrospective study the positive predictive value of the mid-treatment scan, was high for the post-treatment result for patient and lesion response seen on D2.

Screening Criteria and Considerations of Offshore Enhanced Oil Recovery

Directory of Open Access Journals (Sweden)

Pan-Sang Kang

2016-01-01

Full Text Available The application of enhanced oil recovery (EOR in offshore oil fields has received significant attention due to the potentially enormous amount of recoverable oil. However, EOR application offshore is in its very early stage due to conditions that are more complex than onshore oil fields, owing to the unique parameters present offshore. Therefore, successful EOR applications in offshore oil fields require different screening criteria than those for conventional onshore applications. A comprehensive database for onshore applications of EOR processes together with a limited offshore EOR application database are analyzed in this paper, and the important parameters for successful offshore application are incorporated into the new EOR screening criteria. In this paper, screening criteria to determine acceptable EOR processes for offshore fields, including hydrocarbon gas miscible, CO2 miscible, and polymer processes, are presented. Suggested screening criteria for these EOR processes comprise quantitative boundaries and qualitative considerations. Quantitative screening criteria are predominantly based on quantifiable data, such as oil and reservoir properties. Qualitative screening considerations mainly focus on the operational issues present offshore, including platform space constraints, limited disposal options, injectant availability, and flow assurance matters (including hydrate formation and difficulties in emulsion separation.

33 CFR 155.1010 - Purpose.

Science.gov (United States)

2010-07-01

... OIL OR HAZARDOUS MATERIAL POLLUTION PREVENTION REGULATIONS FOR VESSELS Tank Vessel Response Plans for Oil § 155.1010 Purpose. The purpose of this subpart is to establish requirements for oil spill response plans for certain vessels. The planning criteria in this subpart are intended for use in response...

The validity of world class business criteria across developed and developing countries

Directory of Open Access Journals (Sweden)

Andre J. Parker

2010-11-01

Research purpose: To assess the validity of the general assumption in the literature that world class criteria are equally applicable worldwide. Motivation for research: The possibility exists that developing countries require an adjusted mix of world class criteria and practices to become globally competitive. Research design, approach and method: A quantitative field survey research approach was adopted. A web-enabled questionnaire was designed, covering 35 world class practices grouped under 7 world class criteria. A cross-section of the senior management from 14 developing and 20 developed country’s organisations partook in the study. Main findings: It was empirically confirmed that the majority of world class practices posited in the literature are used by participating organisations; that world class criteria do not apply equally across developed and developing countries; and that more important than country location, is the deliberate choice by an organisation’s leadership to become world class. An empirically based model of ascending to world class was proposed. Practical/managerial implications: Regardless of country location, the leadership of an organisation can make their organisation world class by applying the proposed world class model. Contribution/value add: A reliable web enabled instrument was designed that can be used to assess an organisation’s world class standing; the assumption that world class criteria are equally valid across developing and developed countries was proven partially incorrect; since becoming or being world class is also a leadership choice regardless of location.

Quantitative analytical hierarchy process to marketing store location selection

Directory of Open Access Journals (Sweden)

Harwati

2018-01-01

Full Text Available The selection of Store to market the product is belong to Multi Criteria Decision Making problem. The criteria used have conflict of interest with each other to produce an optimal location. This research uses four important criteria to select new location of marketing store appropriate with the references: distance to location, competition level with competitor, number of potential customer, and location rent cost. Quantitative data is used to determine the optimum location with AHP method. Quantitative data are preferred to avoid inconsistency when using expert opinion. The AHP result optimum location among three alternatives places.

Pressure vessel inspection criteria based on fitness-for-purpose assessment

International Nuclear Information System (INIS)

Grover, J.L.; Cipolla, R.C.

1985-01-01

The paper on pressure vessel inspection investigates the methodology required to establish an inspection strategy consistent with fracture mechanics analysis, i.e. to define allowable flaw sizes based on location within the vessel. The methodology is demonstrated using a sample problem for a typical pressurised water reactor pressure vessel, and shows the impact of certain assumptions on the inspection strategy. The results indicate that the flaw size varies with the shape of the assumed residual stress field and the through-thickness location. Also in general, the fracture mechanics evaluation allows flaws much larger than are allowed by the inspection acceptance criteria. (UK)

THE EMERGING ECONOMIES CLASSIFICATION IN TERMS OF THEIR DEFINING, GROUPING CRITERIA AND ACRONYMS USED FOR THIS PURPOSE

Directory of Open Access Journals (Sweden)

Daniela-Neonila, Mardiros

2014-11-01

Full Text Available The starting point of this paper is represented by an evolutionary approach of the terminology used to define the term of emerging economy, of the review of the acronyms used for the purpose to group some of these economies in relation to certain criteria. The approach of the emerging economies is followed by the presentation and the systematization of some of the definitions that, during the time, was given by certain personalities, groups and international organizations to this concept. Talking about economies, some of the important indicators in the award of the emerging economy status are those who take into consideration the income and the economic growth rate illustrated in this paper by GDP. Subsequently of the screening realized for the mentioned characteristics set was taken into consideration the mode how they are manifested in a number of emerging economies of Europe.

Derivation of quantitative acceptance criteria for disposal of radioactive waste to near surface facilities: Development and implementation of an approach for the post-closure phase

International Nuclear Information System (INIS)

Torres, C.

2000-01-01

The International Atomic Energy Agency has established a project to develop and illustrate, through practical examples, an approach that allows the derivation of quantitative waste acceptance criteria for near surface disposal of radioactive waste. The first phase focussed on the derivation of example post-closure safety waste acceptance criteria through the use of a safety assessment approach that allows for the derivation of values in a clear and well documented manner. The approach consists of five steps: the specification of the assessment context; the description of the disposal system; the development and justification of scenarios; the formulation and implementation of models; and the calculation and derivation of example values. The approach has been successfully used to derive activity values for the disposal of radioactive waste to illustrative near surface facilities. (author)

Diagnostic performance of semi-quantitative and quantitative stress CMR perfusion analysis: a meta-analysis.

Science.gov (United States)

van Dijk, R; van Assen, M; Vliegenthart, R; de Bock, G H; van der Harst, P; Oudkerk, M

2017-11-27

Stress cardiovascular magnetic resonance (CMR) perfusion imaging is a promising modality for the evaluation of coronary artery disease (CAD) due to high spatial resolution and absence of radiation. Semi-quantitative and quantitative analysis of CMR perfusion are based on signal-intensity curves produced during the first-pass of gadolinium contrast. Multiple semi-quantitative and quantitative parameters have been introduced. Diagnostic performance of these parameters varies extensively among studies and standardized protocols are lacking. This study aims to determine the diagnostic accuracy of semi- quantitative and quantitative CMR perfusion parameters, compared to multiple reference standards. Pubmed, WebOfScience, and Embase were systematically searched using predefined criteria (3272 articles). A check for duplicates was performed (1967 articles). Eligibility and relevance of the articles was determined by two reviewers using pre-defined criteria. The primary data extraction was performed independently by two researchers with the use of a predefined template. Differences in extracted data were resolved by discussion between the two researchers. The quality of the included studies was assessed using the 'Quality Assessment of Diagnostic Accuracy Studies Tool' (QUADAS-2). True positives, false positives, true negatives, and false negatives were subtracted/calculated from the articles. The principal summary measures used to assess diagnostic accuracy were sensitivity, specificity, andarea under the receiver operating curve (AUC). Data was pooled according to analysis territory, reference standard and perfusion parameter. Twenty-two articles were eligible based on the predefined study eligibility criteria. The pooled diagnostic accuracy for segment-, territory- and patient-based analyses showed good diagnostic performance with sensitivity of 0.88, 0.82, and 0.83, specificity of 0.72, 0.83, and 0.76 and AUC of 0.90, 0.84, and 0.87, respectively. In per territory

Predicting criteria continuous concentrations of 34 metals or metalloids by use of quantitative ion character-activity relationships-species sensitivity distributions (QICAR-SSD) model.

Science.gov (United States)

Mu, Yunsong; Wu, Fengchang; Chen, Cheng; Liu, Yuedan; Zhao, Xiaoli; Haiqing Liao; Giesy, John P

2014-05-01

Criteria continuous concentrations (CCCs) are useful for describing chronic exposure to pollutants and setting water quality standards to protect aquatic life. However, because of financial, practical, or ethical restrictions on toxicity testing, few data are available to derive CCCs. In this study, CCCs for 34 metals or metalloids were derived using quantitative ion character-activity relationships-species sensitivity distributions (QICAR-SSD) and the final acute-chronic ratio (FACR) method. The results showed that chronic toxic potencies were correlated with several physico-chemical properties among eight species chosen, where the softness index was the most predictive characteristic. Predicted CCCs for most of the metals, except for Lead and Iron, were within a range of 10-fold of values recommended by the U.S. EPA. The QICAR-SSD model was superior to the FACR method for prediction of data-poor metals. This would have significance for predicting toxic potencies and criteria thresholds of more metals or metalloids. Copyright © 2014 Elsevier Ltd. All rights reserved.

48 CFR 9904.409-20 - Purpose.

Science.gov (United States)

2010-10-01

... Section 9904.409-20 Federal Acquisition Regulations System COST ACCOUNTING STANDARDS BOARD, OFFICE OF FEDERAL PROCUREMENT POLICY, OFFICE OF MANAGEMENT AND BUDGET PROCUREMENT PRACTICES AND COST ACCOUNTING STANDARDS COST ACCOUNTING STANDARDS 9904.409-20 Purpose. The purpose of this Standard is to provide criteria...

Predicting criteria continuous concentrations of 34 metals or metalloids by use of quantitative ion character-activity relationships–species sensitivity distributions (QICAR–SSD) model

International Nuclear Information System (INIS)

Mu, Yunsong; Wu, Fengchang; Chen, Cheng; Liu, Yuedan; Zhao, Xiaoli; Haiqing Liao; Giesy, John P.

2014-01-01

Criteria continuous concentrations (CCCs) are useful for describing chronic exposure to pollutants and setting water quality standards to protect aquatic life. However, because of financial, practical, or ethical restrictions on toxicity testing, few data are available to derive CCCs. In this study, CCCs for 34 metals or metalloids were derived using quantitative ion character-activity relationships–species sensitivity distributions (QICAR–SSD) and the final acute-chronic ratio (FACR) method. The results showed that chronic toxic potencies were correlated with several physico-chemical properties among eight species chosen, where the softness index was the most predictive characteristic. Predicted CCCs for most of the metals, except for Lead and Iron, were within a range of 10-fold of values recommended by the U.S. EPA. The QICAR–SSD model was superior to the FACR method for prediction of data-poor metals. This would have significance for predicting toxic potencies and criteria thresholds of more metals or metalloids. - Highlights: • We investigate relationships between σp and log-NOEC in eight species. • The QICAR–SSD model, FACR, and CMC/CCC were used to predict CCCs. • They are as a supplement to screening for toxicities, criteria and standards. - CCCs for 34 metals/metalloids were predicted by use of QICAR–SSD model and FACR method

32 CFR 845.1 - Purpose.

Science.gov (United States)

2010-07-01

... EXPENSES IN FOREIGN TRIBUNALS § 845.1 Purpose. This part establishes criteria and assigns responsibility... the Armed Forces, civilian personnel and dependents. Payment of fines is not authorized hereunder. ...

ST segment/heart rate slope as a predictor of coronary artery disease: comparison with quantitative thallium imaging and conventional ST segment criteria

International Nuclear Information System (INIS)

Finkelhor, R.S.; Newhouse, K.E.; Vrobel, T.R.; Miron, S.D.; Bahler, R.C.

1986-01-01

The ST segment shift relative to exercise-induced increments in heart rate, the ST/heart rate slope (ST/HR slope), has been proposed as a more accurate ECG criterion for diagnosing significant coronary artery disease (CAD). Its clinical utility, with the use of a standard treadmill protocol, was compared with quantitative stress thallium (TI) and standard treadmill criteria in 64 unselected patients who underwent coronary angiography. The overall diagnostic accuracy of the ST/HR slope was an improvement over TI and conventional ST criteria (81%, 67%, and 69%). For patients failing to reach 85% of their age-predicted maximal heart rate, its diagnostic accuracy was comparable with TI (77% and 74%). Its sensitivity in patients without prior myocardial infarctions was equivalent to that of thallium (91% and 95%). The ST/HR slope was directly related to the angiographic severity (Gensini score) of CAD in patients without a prior infarction (r = 0.61, p less than 0.001). The ST/HR slope was an improved ECG criterion for diagnosing CAD and compared favorably with TI imaging

[Application and Integration of Qualitative and Quantitative Research Methods in Intervention Studies in Rehabilitation Research].

Science.gov (United States)

Wirtz, M A; Strohmer, J

2016-06-01

In order to develop and evaluate interventions in rehabilitation research a wide range of empirical research methods may be adopted. Qualitative research methods emphasize the relevance of an open research focus and a natural proximity to research objects. Accordingly, using qualitative methods special benefits may arise if researchers strive to identify and organize unknown information aspects (inductive purpose). Particularly, quantitative research methods require a high degree of standardization and transparency of the research process. Furthermore, a clear definition of efficacy and effectiveness exists (deductive purpose). These paradigmatic approaches are characterized by almost opposite key characteristics, application standards, purposes and quality criteria. Hence, specific aspects have to be regarded if researchers aim to select or combine those approaches in order to ensure an optimal gain in knowledge. © Georg Thieme Verlag KG Stuttgart · New York.

LEARNING MATERIALS SELECTION FOR DIFFERENTIATED INSTRUCTION OF ENGLISH FOR SPECIFIC PURPOSES OF FUTURE PROFESSIONALS IN THE FIELD OF INFORMATION TECHNOLOGY

Directory of Open Access Journals (Sweden)

Oksana Synekop

2017-09-01

Full Text Available In conditions of differentiation the learning materials selection will optimize the training English for Specific Purposes of the future professionals in the field of information technology at university level. The purpose of the article is to define the basic unit of learning material, the factors of influence on the learning material selection, principles, criteria and the procedure of learning material selection in this paper. Reviewing the scientific achievements in the learning material selection in teaching English has become a basis for defining the factors of influence, principles and criteria in the research. The basic unit of learning material (learning English text for professional purposes is outlined. The factors of influence and principles (correspondence of learning materials to professional interests and needs of information technology students; necessary ability and accessibility; regarding the linguistic and stylistic necessity and sufficiency; availability of Internet sources information of the learning material selection are defined. Also, the qualitative criteria (authenticity; professional significance, relevance and informativeness; conformity of foreign language level and intellectual development of students; variety of genres and forms of speech, their sufficient filling by linguistic material; coherence, integrity, consistency, semantic completeness; topic conformity; situation conformity; unlimited access, reliability and exemplarity of Internet sources and the quantitative criteria (the amount of material of the learning material selection are highlighted. The process of English for Specific Purposes material selection (defining the disciplines of different cycles; defining spheres and related topics; outlining situations, communicative roles and intentions of professional communication; specifying the sources of selection; evaluating the texts; analysis of the knowledge, skills and sub-skills required for the

Toward criteria for pragmatic measurement in implementation research and practice: a stakeholder-driven approach using concept mapping.

Science.gov (United States)

Powell, Byron J; Stanick, Cameo F; Halko, Heather M; Dorsey, Caitlin N; Weiner, Bryan J; Barwick, Melanie A; Damschroder, Laura J; Wensing, Michel; Wolfenden, Luke; Lewis, Cara C

2017-10-03

Advancing implementation research and practice requires valid and reliable measures of implementation determinants, mechanisms, processes, strategies, and outcomes. However, researchers and implementation stakeholders are unlikely to use measures if they are not also pragmatic. The purpose of this study was to establish a stakeholder-driven conceptualization of the domains that comprise the pragmatic measure construct. It built upon a systematic review of the literature and semi-structured stakeholder interviews that generated 47 criteria for pragmatic measures, and aimed to further refine that set of criteria by identifying conceptually distinct categories of the pragmatic measure construct and providing quantitative ratings of the criteria's clarity and importance. Twenty-four stakeholders with expertise in implementation practice completed a concept mapping activity wherein they organized the initial list of 47 criteria into conceptually distinct categories and rated their clarity and importance. Multidimensional scaling, hierarchical cluster analysis, and descriptive statistics were used to analyze the data. The 47 criteria were meaningfully grouped into four distinct categories: (1) acceptable, (2) compatible, (3) easy, and (4) useful. Average ratings of clarity and importance at the category and individual criteria level will be presented. This study advances the field of implementation science and practice by providing clear and conceptually distinct domains of the pragmatic measure construct. Next steps will include a Delphi process to develop consensus on the most important criteria and the development of quantifiable pragmatic rating criteria that can be used to assess measures.

20 CFR 606.21 - Criteria for cap.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Criteria for cap. 606.21 Section 606.21 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR TAX CREDITS UNDER THE... Reduction § 606.21 Criteria for cap. (a) Reduction in unemployment tax effort. (1) For purposes of paragraph...

[A comparison of convenience sampling and purposive sampling].

Science.gov (United States)

Suen, Lee-Jen Wu; Huang, Hui-Man; Lee, Hao-Hsien

2014-06-01

Convenience sampling and purposive sampling are two different sampling methods. This article first explains sampling terms such as target population, accessible population, simple random sampling, intended sample, actual sample, and statistical power analysis. These terms are then used to explain the difference between "convenience sampling" and purposive sampling." Convenience sampling is a non-probabilistic sampling technique applicable to qualitative or quantitative studies, although it is most frequently used in quantitative studies. In convenience samples, subjects more readily accessible to the researcher are more likely to be included. Thus, in quantitative studies, opportunity to participate is not equal for all qualified individuals in the target population and study results are not necessarily generalizable to this population. As in all quantitative studies, increasing the sample size increases the statistical power of the convenience sample. In contrast, purposive sampling is typically used in qualitative studies. Researchers who use this technique carefully select subjects based on study purpose with the expectation that each participant will provide unique and rich information of value to the study. As a result, members of the accessible population are not interchangeable and sample size is determined by data saturation not by statistical power analysis.

Use of fitness-for-purpose criteria for transport infrastructure products

CSIR Research Space (South Africa)

Steyn, WJVDM

2006-09-01

Full Text Available certification of non-standard products to assess their fitness for- purpose. Therefore, this paper provides background to the Agrément concept, discusses the current evaluation systems being available through Agrément for road infrastructure and reflects...

Social Advertising Quality: Assessment Criteria

Directory of Open Access Journals (Sweden)

S. B. Kalmykov

2017-01-01

Full Text Available Purpose: the The purpose of the publication is development of existing criterial assessment in social advertising sphere. The next objectives are provided for its achievement: to establish research methodology, to develop the author’s version of necessary notional apparatus and conceptual generalization, to determine the elements of social advertising quality, to establish the factors of its quality, to conduct the systematization of existing criteria and measuring instruments of quality assessment, to form new criteria of social advertising quality, to apply received results for development of criterial assessment to determine the further research perspectives. Methods: the methodology of research of management of social advertising interaction with target audience, which has dynamic procedural character with use of sociological knowledge multivariate paradigmatic status, has been proposed. Results: the primary received results: the multivariate paradigmatic research basis with use of works of famous domestic and foreign scientists in sociology, qualimetry and management spheres; the definitions of social advertising, its quality, sociological quality provision system, target audience behavior model during social advertising interaction are offered; the quality factors with three groups by level of effect on consumer are established; the systematization of existing quality and its measure instruments assessment criteria by detected social advertising quality elements are conducted; the two new criteria and its management quality assessment measuring instruments in social advertising sphere are developed; the one of the common groups of production quality criteria – adaptability with considering of new management quality criteria and conducted systematization of existing social advertising creative quality assessment criteria development; the perspective of further perfection of quality criterial assessment based on social advertising

Quantitative Appearance Inspection for Film Coated Tablets.

Science.gov (United States)

Yoshino, Hiroyuki; Yamashita, Kazunari; Iwao, Yasunori; Noguchi, Shuji; Itai, Shigeru

2016-01-01

The decision criteria for the physical appearance of pharmaceutical products are subjective and qualitative means of evaluation that are based entirely on human interpretation. In this study, we have developed a comprehensive method for the quantitative analysis of the physical appearance of film coated tablets. Three different kinds of film coated tablets with considerable differences in their physical appearances were manufactured as models, and their surface roughness, contact angle, color measurements and physicochemical properties were investigated as potential characteristics for the quantitative analysis of their physical appearance. All of these characteristics were useful for the quantitative evaluation of the physical appearances of the tablets, and could potentially be used to establish decision criteria to assess the quality of tablets. In particular, the analysis of the surface roughness and film coating properties of the tablets by terahertz spectroscopy allowed for an effective evaluation of the tablets' properties. These results indicated the possibility of inspecting the appearance of tablets during the film coating process.

32 CFR 101.1 - Reissuance and purpose.

Science.gov (United States)

2010-07-01

... PARTICIPATION IN RESERVE TRAINING PROGRAMS § 101.1 Reissuance and purpose. This part establishes: (a) The criteria and training requirements for satisfactory participation by members of the Reserve components of... 32 National Defense 1 2010-07-01 2010-07-01 false Reissuance and purpose. 101.1 Section 101.1...

Testing decision rules for categorizing species' extinction risk to help develop quantitative listing criteria for the U.S. Endangered Species Act.

Science.gov (United States)

Regan, Tracey J; Taylor, Barbara L; Thompson, Grant G; Cochrane, Jean Fitts; Ralls, Katherine; Runge, Michael C; Merrick, Richard

2013-08-01

Lack of guidance for interpreting the definitions of endangered and threatened in the U.S. Endangered Species Act (ESA) has resulted in case-by-case decision making leaving the process vulnerable to being considered arbitrary or capricious. Adopting quantitative decision rules would remedy this but requires the agency to specify the relative urgency concerning extinction events over time, cutoff risk values corresponding to different levels of protection, and the importance given to different types of listing errors. We tested the performance of 3 sets of decision rules that use alternative functions for weighting the relative urgency of future extinction events: a threshold rule set, which uses a decision rule of x% probability of extinction over y years; a concave rule set, where the relative importance of future extinction events declines exponentially over time; and a shoulder rule set that uses a sigmoid shape function, where relative importance declines slowly at first and then more rapidly. We obtained decision cutoffs by interviewing several biologists and then emulated the listing process with simulations that covered a range of extinction risks typical of ESA listing decisions. We evaluated performance of the decision rules under different data quantities and qualities on the basis of the relative importance of misclassification errors. Although there was little difference between the performance of alternative decision rules for correct listings, the distribution of misclassifications differed depending on the function used. Misclassifications for the threshold and concave listing criteria resulted in more overprotection errors, particularly as uncertainty increased, whereas errors for the shoulder listing criteria were more symmetrical. We developed and tested the framework for quantitative decision rules for listing species under the U.S. ESA. If policy values can be agreed on, use of this framework would improve the implementation of the ESA by

Improving the monitoring of quantitative conditions of peacetime fuel stocks at pumping stations

Directory of Open Access Journals (Sweden)

Slaviša M. Ilić

2011-04-01

human resources. Optimization of quantitative monitoring of peacetime supplies of fuel at gas stations should aim at reducing the impact of the human factor, introducing automated quantitative monitoring of fuel condition with modern equipment for handling as well as applying technology for fast reading and dissemination of information and reports. Civilian pumping stations have been modernized gradually with new digital pump machines, systems for automated production and automated systems for measuring the fuel level in buried tanks. The objectives and criteria of the optimization of model monitoring In order to solve the problem of multi-criteria nature, the methods of operational research have been applied and the formalization of problem solving has been carried out. Models have been identified, criteria and subcriteria have been defined as well as respective criteria values, sub-criteria and weight coefficients for chosen variants in order to rank the alternatives - models. On the basis of the defined objectives and optimization approaches, the task of optimization to be solved is to choose one optimal model of monitoring the quantitative condition of peacetime stocks of fuels at gas stations, out of three variations or alternative models. Application of expert assessment and methods of analytical hierarchy process The problem was solved first 'manually', by using MS Excell, and after that by using the Expert Choice software package. The Expert Choice software package is based on the application of the method of analytical hierarchy process and combines the benefits that this method offers with the speed and visibility of computerized calculations and their result display. The purpose of the AHP method is to rank alternative decisions by their importance and to select the most acceptable alternative on the basis of a defined set of criteria and alternatives. The problem of determining the weight of criteria has been determined by applying the method of expert

Critiquing bachelor candidates' theses: are the criteria useful?

Science.gov (United States)

Kapborg, I; Berterö, C

2002-06-01

Nursing education programmes should be at an academic level and connected to research. In Sweden, empirical studies are generally required in order to obtain a Bachelor's degree; hence, in some cases, these studies are replaced by a literature review. A study was conducted using 11 criteria. Thirteen theses produced in a department of nursing science were examined, elaborated and reproduced by reviewing international and national literature. Thereafter, the criteria themselves were scrutinized. Principal findings when critiquing the theses were that in eight theses the purpose was dearly identified and well defined in relation to the study accomplished; in three theses the purpose was indistinct and vague; and in two the definitions and research questions were lacking. The topic was relevant for the area of nursing in all theses. General problems identified were poor spelling and grammar, and unsatisfactory thesis structure. This article discusses whether criteria are useful when examining the Bachelor candidates' theses. The authors report that the criteria seemed to be useful, giving some guidance for scrutinizing theses and facilitating correspondence. Criteria could be appropriate guidelines for using to increase the quality of the theses as well as the quality of nursing.

Establishing Quantitative Standards for Residual Alkaline Phosphatase in Pasteurized Milk.

Science.gov (United States)

Kim, Dong-Hyeon; Chon, Jung-Whan; Lim, Jong-Soo; Kim, Hong-Seok; Kang, Il-Byeong; Jeong, Dana; Song, Kwang-Young; Kim, Hyunsook; Kim, Kwang-Yup; Seo, Kun-Ho

2016-01-01

The alkaline phosphatase (ALP) assay is a rapid and convenient method for verifying milk pasteurization. Since colorimetric ALP assays rely on subjective visual assessments, their results are especially unreliable near the detection limits. In this study, we attempted to establish quantitative criteria for residual ALP in milk by using a more objective method based on spectrophotometric measurements. Raw milk was heat-treated for 0, 10, 20, 30, and 40 min and then subjected to ALP assays. The quantitative criteria for residual ALP in the milk was determined as 2 μg phenol/mL of milk, which is just above the ALP value of milk samples heat-treated for 30 min. These newly proposed methodology and criteria could facilitate the microbiological quality control of milk.

32 CFR 249.1 - Purpose.

Science.gov (United States)

2010-07-01

... OF DoD-RELATED SCIENTIFIC AND TECHNICAL PAPERS AT MEETINGS § 249.1 Purpose. This part amplifies... scientific and technical papers; provides guidance for reviewing and presenting papers containing export... scientific and technical papers; and provides criteria for identifying fundamental research activities...

Safety-related operator actions: methodology for developing criteria

International Nuclear Information System (INIS)

Kozinsky, E.J.; Gray, L.H.; Beare, A.N.; Barks, D.B.; Gomer, F.E.

1984-03-01

This report presents a methodology for developing criteria for design evaluation of safety-related actions by nuclear power plant reactor operators, and identifies a supporting data base. It is the eleventh and final NUREG/CR Report on the Safety-Related Operator Actions Program, conducted by Oak Ridge National Laboratory for the US Nuclear Regulatory Commission. The operator performance data were developed from training simulator experiments involving operator responses to simulated scenarios of plant disturbances; from field data on events with similar scenarios; and from task analytic data. A conceptual model to integrate the data was developed and a computer simulation of the model was run, using the SAINT modeling language. Proposed is a quantitative predictive model of operator performance, the Operator Personnel Performance Simulation (OPPS) Model, driven by task requirements, information presentation, and system dynamics. The model output, a probability distribution of predicted time to correctly complete safety-related operator actions, provides data for objective evaluation of quantitative design criteria

Structural acceptance criteria Remote Handling Building Tritium Extraction Facility

Energy Technology Data Exchange (ETDEWEB)

Mertz, G.

1999-12-16

This structural acceptance criteria contains the requirements for the structural analysis and design of the Remote Handling Building (RHB) in the Tritium Extraction Facility (TEF). The purpose of this acceptance criteria is to identify the specific criteria and methods that will ensure a structurally robust building that will safely perform its intended function and comply with the applicable Department of Energy (DOE) structural requirements.

Structural acceptance criteria Remote Handling Building Tritium Extraction Facility

International Nuclear Information System (INIS)

Mertz, G.

1999-01-01

This structural acceptance criteria contains the requirements for the structural analysis and design of the Remote Handling Building (RHB) in the Tritium Extraction Facility (TEF). The purpose of this acceptance criteria is to identify the specific criteria and methods that will ensure a structurally robust building that will safely perform its intended function and comply with the applicable Department of Energy (DOE) structural requirements

CT quantitative diagnosis in fatty liver: a clinical study

International Nuclear Information System (INIS)

He Wen; Qian Linxue; Zhao Jixue; Ma Daqing; Feng Jie; Hu Zhihai

2001-01-01

Objective: To establish the CT criteria of quantitative diagnosis for liver steatosis by means of studying the CT features of fatty liver cases proven histologically. Methods: Twenty-eight cases of fatty liver were underwent non-enhanced CT scan, and the attenuation of liver parenchyma was measured. To differentiate the degree of fatty liver, the mean CT value and the relative density of hepatic vessels were observed. The quantitative diagnosis was made according to the CT number threshold and the criteria of relative density of hepatic vessels, respectively. Results: Among the 28 cases, there were 17 cases of mild steatosis with mean CT number of 46 HU (32-65 HU), 7 cases of middle degree fatty liver with mean CT number of 28 HU (15-38 HU), and 4 cases of sever fatty liver with mean CT number of 0.2 HU (-7-11 HU). For the relative density of hepatic vessels, 16 of the 17 cases of mild fatty liver had a appearance of hepatic vessels immersion and 1 mild case had reverse hepatic vessels display, 6 of 7 middle degree cases had reverse hepatic vessels display with 1 case having the appearance of hepatic vessels immersion, and all the 4 case of sever steatosis had the appearance of reverse hepatic vessels display with sharp contrast between vessels and the liver parenchyma. The accuracy of quantitative diagnosis was 65.9% and 93.1% by means of criteria of CT number threshold and relative density of hepatic vessels, respectively (x 2 = 7.153, P < 0.01). Conclusion: The criteria of relative density of hepatic vessels is more reliable than that of CT number threshold in quantitative diagnosis of fatty liver

Waste management project’s alternatives: A risk-based multi-criteria assessment (RBMCA) approach

International Nuclear Information System (INIS)

Karmperis, Athanasios C.; Sotirchos, Anastasios; Aravossis, Konstantinos; Tatsiopoulos, Ilias P.

2012-01-01

Highlights: ► We examine the evaluation of a waste management project’s alternatives. ► We present a novel risk-based multi-criteria assessment (RBMCA) approach. ► In the RBMCA the evaluation criteria are based on the quantitative risk analysis of the project’s alternatives. ► Correlation between the criteria weight values and the decision makers’ risk preferences is examined. ► Preference to the multi-criteria against the one-criterion evaluation process is discussed. - Abstract: This paper examines the evaluation of a waste management project’s alternatives through a quantitative risk analysis. Cost benefit analysis is a widely used method, in which the investments are mainly assessed through the calculation of their evaluation indicators, namely benefit/cost (B/C) ratios, as well as the quantification of their financial, technical, environmental and social risks. Herein, a novel approach in the form of risk-based multi-criteria assessment (RBMCA) is introduced, which can be used by decision makers, in order to select the optimum alternative of a waste management project. Specifically, decision makers use multiple criteria, which are based on the cumulative probability distribution functions of the alternatives’ B/C ratios. The RBMCA system is used for the evaluation of a waste incineration project’s alternatives, where the correlation between the criteria weight values and the decision makers’ risk preferences is analyzed and useful conclusions are discussed.

15 CFR 290.1 - Purpose.

Science.gov (United States)

2010-01-01

... Technology, as well as criteria for the evaluation of the Centers, throughout the lifecycle of financial... AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE TRANSFER OF MANUFACTURING TECHNOLOGY § 290.1 Purpose. This rule provides policy for a program to establish Regional Centers...

10 CFR 455.90 - Purpose.

Science.gov (United States)

2010-01-01

... Marketing § 455.90 Purpose. This subpart describes what constitutes a State program for technical assistance, program assistance, and marketing that may receive financial assistance under this part and sets forth the eligibility criteria for States to receive grants for technical assistance, program assistance, and marketing. ...

Quantitative analytical hierarchy process to marketing store location selection

OpenAIRE

Harwati; Utami Intan

2018-01-01

The selection of Store to market the product is belong to Multi Criteria Decision Making problem. The criteria used have conflict of interest with each other to produce an optimal location. This research uses four important criteria to select new location of marketing store appropriate with the references: distance to location, competition level with competitor, number of potential customer, and location rent cost. Quantitative data is used to determine the optimum location with AHP method. Q...

Diagnostic Performance of Three Phase Bone Scan for Complex Regional Pain Syndrome Type 1 with Optimally Modified Image Criteria

Energy Technology Data Exchange (ETDEWEB)

Kwon, Hyun Woo; Paeng, Jin Chul; Nahm, Francins Sahngun; Kim, Seog Gyun; Zehra, Tanzeel; Oh, So Won; Lee, Hyo Sang; Kang, Keon Wook; Chung, June Key; Lee, Myung Chul; Lee, Dong Soo [Seoul National Univ. College of Medicine, Seoul (Korea, Republic of)

2011-12-15

Although the three phase bone scan (TBPS) is one of the widely used imaging studies for diagnosing complex regional pain syndrome type 1 (CRPS 1), there is some controversy regarding the TPBS image criteria for CRPS 1. In this study, we modified the image criteria using image pattern and quantitative analysis in the patients diagnosed using the most recent consensus clinical diagnostic criteria. The study included 140 patients with suspected CRPS 1 (CRPS 1, n=79; non CRPS, n=61; mean age 39{+-}15 years) who underwent TPBS. The clinical diagnostic criteria for CRPS 1 revised by the Budapest consensus group were used for confirmative diagnosis. Patients were classified according to flow/pool and delayed uptake (DU) image patterns, and the time interval between the initiating event and TPBS (TI{sup eventscan)}. Quantitative analysis for lesion to contralateral ratio (LCR) was performed. Modified TPBS image criteria were created and evaluated for optimal diagnostic performance. Both increased and decreased periarticular DU were significant image findings for CRPS 1 (CRPS 1 positive rate=73% in the increased DU group, 75% in the decreased DU group). The TI{sup eventscand}id not differ significantly between the different image pattern groups. Quantitative analysis revealed an LCR of 1.43 was the optimal cutoff value for CRPS 1 and diagnostic performance was significantly improved in the increased DU group (area under the curve=0.732). Given the modified image criteria, the sensitivity and specificity of TPBS for diagnosing CRPS 1 were 80% and 72%, respectively. Optimally modified TPBS image criteria for CRPS 1 were suggested using image pattern and quantitative analysis. With the criteria, TPBS is an effective imaging study for CRPS 1 even with the most recent consensus clinical diagnostic criteria.

Diagnostic Performance of Three Phase Bone Scan for Complex Regional Pain Syndrome Type 1 with Optimally Modified Image Criteria

International Nuclear Information System (INIS)

Kwon, Hyun Woo; Paeng, Jin Chul; Nahm, Francins Sahngun; Kim, Seog Gyun; Zehra, Tanzeel; Oh, So Won; Lee, Hyo Sang; Kang, Keon Wook; Chung, June Key; Lee, Myung Chul; Lee, Dong Soo

2011-01-01

Although the three phase bone scan (TBPS) is one of the widely used imaging studies for diagnosing complex regional pain syndrome type 1 (CRPS 1), there is some controversy regarding the TPBS image criteria for CRPS 1. In this study, we modified the image criteria using image pattern and quantitative analysis in the patients diagnosed using the most recent consensus clinical diagnostic criteria. The study included 140 patients with suspected CRPS 1 (CRPS 1, n=79; non CRPS, n=61; mean age 39±15 years) who underwent TPBS. The clinical diagnostic criteria for CRPS 1 revised by the Budapest consensus group were used for confirmative diagnosis. Patients were classified according to flow/pool and delayed uptake (DU) image patterns, and the time interval between the initiating event and TPBS (TI eventscan) . Quantitative analysis for lesion to contralateral ratio (LCR) was performed. Modified TPBS image criteria were created and evaluated for optimal diagnostic performance. Both increased and decreased periarticular DU were significant image findings for CRPS 1 (CRPS 1 positive rate=73% in the increased DU group, 75% in the decreased DU group). The TI eventscand id not differ significantly between the different image pattern groups. Quantitative analysis revealed an LCR of 1.43 was the optimal cutoff value for CRPS 1 and diagnostic performance was significantly improved in the increased DU group (area under the curve=0.732). Given the modified image criteria, the sensitivity and specificity of TPBS for diagnosing CRPS 1 were 80% and 72%, respectively. Optimally modified TPBS image criteria for CRPS 1 were suggested using image pattern and quantitative analysis. With the criteria, TPBS is an effective imaging study for CRPS 1 even with the most recent consensus clinical diagnostic criteria.

Study of Validity Criteria for Radionuclide-Analysis of Low- and Intermediate-Level Radioactive Waste

Energy Technology Data Exchange (ETDEWEB)

Kim, Ji Uk; Baek, Hyun Suk; Jeong, Sung Yeop [Sungwoo E and T Co., Hanam (Korea, Republic of); Shin, Seung Kyu [Korea Radioactive waste Management Corporation, Gyeongju (Korea, Republic of)

2013-05-15

Literature survey on the deviation of the measuring equipment and statistical analysis on the measured data of domestic LILW were performed in order to set evaluation criteria quantitatively when comparing the result of each test and inspections. This study provided opportunity to increase credibility and re-assure validity of Waste Acceptance Criteria (WAC). Through the statistical analysis for deviation of measurement by comparing repository inspection with generator self-test, the quantitative acceptance criteria were set depending on specific activity of Co-60 and Cs-137. The acceptance criteria is a relative bias of KRMC result to generator result and set from low 50 % to high 150 % for Co-60, from low 30 % to 250 % for Cs-137. In this study, because the statistical analysis results of the waste drum assay are not enough representing whole range specified at WAC, an additional research that include characteristic analysis of LILW generated other birthplace should be done.

36 CFR 62.1 - Purpose

Science.gov (United States)

2010-07-01

... Landmarks Program focuses attention on areas of exceptional natural value to the nation as a whole rather... United States, enhances the scientific and educational values of preserved areas, strengthens public... LANDMARKS PROGRAM § 62.1 Purpose The procedures in this part set forth the processes and criteria for the...

Structured methodology review identified seven (RETREAT) criteria for selecting qualitative evidence synthesis approaches.

Science.gov (United States)

Booth, Andrew; Noyes, Jane; Flemming, Kate; Gerhardus, Ansgar; Wahlster, Philip; van der Wilt, Gert Jan; Mozygemba, Kati; Refolo, Pietro; Sacchini, Dario; Tummers, Marcia; Rehfuess, Eva

2018-07-01

To compare and contrast different methods of qualitative evidence synthesis (QES) against criteria identified from the literature and to map their attributes to inform selection of the most appropriate QES method to answer research questions addressed by qualitative research. Electronic databases, citation searching, and a study register were used to identify studies reporting QES methods. Attributes compiled from 26 methodological papers (2001-2014) were used as a framework for data extraction. Data were extracted into summary tables by one reviewer and then considered within the author team. We identified seven considerations determining choice of methods from the methodological literature, encapsulated within the mnemonic Review question-Epistemology-Time/Timescale-Resources-Expertise-Audience and purpose-Type of data. We mapped 15 different published QES methods against these seven criteria. The final framework focuses on stand-alone QES methods but may also hold potential when integrating quantitative and qualitative data. These findings offer a contemporary perspective as a conceptual basis for future empirical investigation of the advantages and disadvantages of different methods of QES. It is hoped that this will inform appropriate selection of QES approaches. Copyright © 2018 Elsevier Inc. All rights reserved.

A multi-criteria evaluation method for climate change mitigation policy instruments

International Nuclear Information System (INIS)

Konidari, Popi; Mavrakis, Dimitrios

2007-01-01

This paper presents an integrated multi-criteria analysis method for the quantitative evaluation of climate change mitigation policy instruments. The method consists of: (i) a set of criteria supported by sub-criteria, all of which describe the complex framework under which these instruments are selected by policy makers and implemented, (ii) an Analytical Hierarchy Process (AHP) process for defining weight coefficients for criteria and sub-criteria according to the preferences of three stakeholders groups and (iii) a Multi-Attribute Theory (MAUT)/Simple Multi-Attribute Ranking Technique (SMART) process for assigning grades to each instrument that is evaluated for its performance under a specific sub-criterion. Arguments for the selected combination of these standard methods and definitions for criteria/sub-criteria are quoted. Consistency and robustness tests are performed. The functionality of the proposed method is tested by assessing the aggregate performances of the EU emission trading scheme at Denmark, Germany, Greece, Italy, Netherlands, Portugal, Sweden and United Kingdom. Conclusions are discussed

Sustainable Urban Forestry Potential Based Quantitative And Qualitative Measurement Using Geospatial Technique

International Nuclear Information System (INIS)

Rosli, A Z; Reba, M N M; Roslan, N; Room, M H M

2014-01-01

In order to maintain the stability of natural ecosystems around urban areas, urban forestry will be the best initiative to maintain and control green space in our country. Integration between remote sensing (RS) and geospatial information system (GIS) serves as an effective tool for monitoring environmental changes and planning, managing and developing a sustainable urbanization. This paper aims to assess capability of the integration of RS and GIS to provide information for urban forest potential sites based on qualitative and quantitative by using priority parameter ranking in the new township of Nusajaya. SPOT image was used to provide high spatial accuracy while map of topography, landuse, soils group, hydrology, Digital Elevation Model (DEM) and soil series data were applied to enhance the satellite image in detecting and locating present attributes and features on the ground. Multi-Criteria Decision Making (MCDM) technique provides structural and pair wise quantification and comparison elements and criteria for priority ranking for urban forestry purpose. Slope, soil texture, drainage, spatial area, availability of natural resource, and vicinity of urban area are criteria considered in this study. This study highlighted the priority ranking MCDM is cost effective tool for decision-making in urban forestry planning and landscaping

Sustainable Urban Forestry Potential Based Quantitative And Qualitative Measurement Using Geospatial Technique

Science.gov (United States)

Rosli, A. Z.; Reba, M. N. M.; Roslan, N.; Room, M. H. M.

2014-02-01

In order to maintain the stability of natural ecosystems around urban areas, urban forestry will be the best initiative to maintain and control green space in our country. Integration between remote sensing (RS) and geospatial information system (GIS) serves as an effective tool for monitoring environmental changes and planning, managing and developing a sustainable urbanization. This paper aims to assess capability of the integration of RS and GIS to provide information for urban forest potential sites based on qualitative and quantitative by using priority parameter ranking in the new township of Nusajaya. SPOT image was used to provide high spatial accuracy while map of topography, landuse, soils group, hydrology, Digital Elevation Model (DEM) and soil series data were applied to enhance the satellite image in detecting and locating present attributes and features on the ground. Multi-Criteria Decision Making (MCDM) technique provides structural and pair wise quantification and comparison elements and criteria for priority ranking for urban forestry purpose. Slope, soil texture, drainage, spatial area, availability of natural resource, and vicinity of urban area are criteria considered in this study. This study highlighted the priority ranking MCDM is cost effective tool for decision-making in urban forestry planning and landscaping.

Selection of disposal contractor by multi criteria decision making methods

Directory of Open Access Journals (Sweden)

Cenker Korkmazer

2016-08-01

Full Text Available Hazardous waste is substance that threaten people and environment in case of improper storage, disposal and transport due to its concentration, physical and chemical properties. Companies producing hazardous waste as a result of several activities mostly do not have any own disposal facilities. In addition, they do not pay attention enough to determine the right contractor as a disposal facility. On the other hand, there are various qualitative and quantitative criteria affecting the selection of the contractor and conflicting with each other. The aim of the performed study is to assist one of these companies producing hazardous waste in the selection of the best contractor that eliminates hazardous waste economic and harmless way. In the study, contractor weights in percentage is calculated by using Analytic Network Process (ANP as one of the multi-criteria decision making (MCDM methods and widely used in the literature which considers both qualitative and quantitative criteria. In the next step, by the help of the mathematical model, contractors that will be given which type of hazardous waste are identified. This integrated approach can be used as a guide for similar firms.

Surgical criteria for femoroacetabular impingement syndrome

DEFF Research Database (Denmark)

Peters, Scott; Laing, Alisha; Emerson, Courtney

2017-01-01

BACKGROUND: The purpose of this review was to analyse and report criteria used for open and arthroscopic surgical treatment of femoroacetabular impingement syndrome (FAIS). METHODS: A librarian-assisted computer search of Medline, CINAHL and Embase for studies related to criterion for FAIS surgery...

DOE natural phenomenal hazards design and evaluation criteria

International Nuclear Information System (INIS)

Murray, R.C.; Nelson, T.A.; Short, S.A.; Kennedy, R.P.; Chander, H.; Hill, J.R.; Kimball, J.K.

1994-10-01

It is the policy of the Department of Energy (DOE) to design, construct, and operate DOE facilities so that workers, the general public, and the environment are protected from the impacts of natural phenomena hazards (NPH). Furthermore, DOE has established explicit goals of acceptable risk for NPH performance. As a result, natural phenomena hazard (earthquake, extreme wind, and flood) design and evaluation criteria for DOE facilities have been developed based on target probabilistic performance goals. These criteria include selection of design/evaluation NPH input from probabilistic hazard curves combined with commonly practiced deterministic response evaluation methods and acceptance criteria with controlled levels of conservatism. For earthquake considerations, conservatism is intentionally introduced in specification of material strengths and capacities, in the allowance of limited inelastic behavior, and by a seismic scale factor. Criteria have been developed following a graded approach for several performance goals ranging from that appropriate for normal-use facilities to that appropriate for facilities involving hazardous or critical operations. Performance goals are comprised of qualitative expressions of acceptable behavior and of target quantitative probabilities that acceptable limits of behavior are maintained. The criteria are simple procedures but have a rigorous basis. This paper addresses DOE seismic design and evaluation criteria

Do green building assessment criteria meet sustainability imperatives: a critical analysis

CSIR Research Space (South Africa)

Van Wyk, Llewellyn V

2008-07-01

Full Text Available The purpose of this paper is to determine whether green building assessment criteria meet the imperatives of sustainable development. The paper finds that green building assessment criteria fail to meet the sustainable development imperatives...

ACL Return to Sport Guidelines and Criteria.

Science.gov (United States)

Davies, George J; McCarty, Eric; Provencher, Matthew; Manske, Robert C

2017-09-01

Because of the epidemiological incidence of anterior cruciate ligament (ACL) injuries, the high reinjury rates that occur when returning back to sports, the actual number of patients that return to the same premorbid level of competition, the high incidence of osteoarthritis at 5-10-year follow-ups, and the effects on the long-term health of the knee and the quality of life for the patient, individualizing the return to sports after ACL reconstruction (ACL-R) is critical. However, one of the challenging but unsolved dilemmas is what criteria and clinical decision making should be used to return an athlete back to sports following an ACL-R. This article describes an example of a functional testing algorithm (FTA) as one method for clinical decision making based on quantitative and qualitative testing and assessment utilized to make informed decisions to return an athlete to their sports safely and without compromised performance. The methods were a review of the best current evidence to support a FTA. In order to evaluate all the complicated domains of the clinical decision making for individualizing the return to sports after ACL-R, numerous assessments need to be performed including the biopsychosocial concepts, impairment testing, strength and power testing, functional testing, and patient-reported outcomes (PROs). The optimum criteria to use for individualizing the return to sports after ACL-R remain elusive. However, since this decision needs to be made on a regular basis with the safety and performance factors of the patient involved, this FTA provides one method of quantitatively and qualitatively making the decisions. Admittedly, there is no predictive validity of this system, but it does provide practical guidelines to facilitate the clinical decision making process for return to sports. The clinical decision to return an athlete back into competition has significant implications ranging from the safety of the athlete, to performance factors and actual

5 CFR 430.404 - Certification criteria.

Science.gov (United States)

2010-01-01

... MANAGEMENT Performance Appraisal Certification for Pay Purposes § 430.404 Certification criteria. (a) To be... system(s) must provide for the following: (1) Alignment, so that the performance expectations for... that the performance expectations for senior employees meet the requirements of 5 CFR part 430...

Packaging design criteria for the MCO cask

International Nuclear Information System (INIS)

Clements, M.D.

1996-01-01

Approximately 2,100 metric tons of unprocessed, irradiated nuclear fuel elements are presently stored in the K Basins. To permit cleanup of the K Basins and fuel conditioning, the fuel will be transported from the K Basins to a Canister Storage Building in the 200 East Area. The purpose of this packaging design criteria is to provide criteria for the design, fabrication, and use of a packaging system to transport the large quantities of irradiated nuclear fuel elements positioned within Multiple Canister Overpacks

Quantitative analysis of Tl-201 myocardial perfusion image with special reference to circumferential profile method

Energy Technology Data Exchange (ETDEWEB)

Miyanaga, Hajime [Kyoto Prefectural Univ. of Medicine (Japan)

1982-08-01

A quantitative analysis of thallium-201 myocardial perfusion image (MPI) was attempted by using circumferential profile method (CPM) and the first purpose of this study is to assess the clinical utility of this method for the detection of myocardial ischemia. In patients with coronary artery disease, CPM analysis to exercise T1-MPI showed high sensitivity (9/12, 75%) and specificity (9/9, 100%), whereas exercise ECG showed high sensitivity (9/12, 75%), but relatively low specificity (7/9, 78%). In patients with myocardial infarction, CPM also showed high sensitivity (34/38, 89%) for the detection of myocardial necrosis, compared with visual interpretation (31/38, 81%) and with ECG (31/38, 81%). Defect score was correlated well with the number of abnormal Q waves. In exercise study, CPM was also sensitive to the change of perfusion defect in T1-MPI produced by exercise. So the results indicate that CPM is a good method not only quantitatively but also objectively to analyze T1-MPI. Although ECG is the most commonly used diagnostic tool for ischemic heart disease, several exercise induced ischemic changes in ECG have been still on discussion as criteria. So the second purpose of this study is to evaluate these ischemic ECG changes by exercise T1-MPI analized quantitatively. ST depression (ischemic 1 mm and junctional 2 mm or more), ST elevation (1 mm or more), and coronary T wave reversion in exercise ECG were though to be ischemic changes.

Field Verification of Undercut Criteria and Alternatives for Subgrade Stabilization-Coastal Plain

Science.gov (United States)

2012-06-01

The North Carolina Department of Transportation (NCDOT) is progressing toward developing quantitative and systematic : criteria that address the implementation of undercutting as a subgrade stabilization measure. As part of this effort, a : laborator...

16 CFR 1031.9 - Purpose and scope.

Science.gov (United States)

2010-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL COMMISSION PARTICIPATION AND COMMISSION EMPLOYEE INVOLVEMENT IN VOLUNTARY STANDARDS ACTIVITIES Employee Involvement § 1031.9 Purpose and scope. (a) This subpart sets forth the Consumer Product Safety Commission's criteria and requirements governing...

Design Criteria for Process Wastewater Pretreatment Facilities

Science.gov (United States)

1988-05-01

Stripping Column H13 ’Re Purpose: The purpose of this report, is to provide design criteria for pretreatment needs for ’ I. INTRODUCTION ’". discharge of...which a portion of the vessel is filled with packing. Packing materials vary from corrugated steel to bundles of fibers (Langdon et al., 1972) to beds...concentration(s) using Table 20. Wastewater treatability studies should be considered as a process-screening tool for all wastewater streams for

A quantitative analysis of Tl-201 myocardial perfusion image with special reference to circumferential profile method

International Nuclear Information System (INIS)

Miyanaga, Hajime

1982-01-01

A quantitative analysis of thallium-201 myocardial perfusion image (MPI) was attempted by using circumferential profile method (CPM) and the first purpose of this study is to assess the clinical utility of this method for the detection of myocardial ischemia. In patients with coronary artery disease, CPM analysis to exercise T1-MPI showed high sensitivity (9/12, 75%) and specificity (9/9, 100%), whereas exercise ECG showed high sensitivity (9/12, 75%), but relatively low specificity (7/9, 78%). In patients with myocardial infarction, CPM also showed high sensitivity (34/38, 89%) for the detection of myocardial necrosis, compared with visual interpretation (31/38, 81%) and with ECG (31/38, 81%). Defect score was correlated well with the number of abnormal Q waves. In exercise study, CPM was also sensitive to the change of perfusion defect in T1-MPI produced by exercise. So the results indicate that CPM is a good method not only quantitatively but also objectively to analyze T1-MPI. Although ECG is the most commonly used diagnostic tool for ischemic heart disease, several exercise induced ischemic changes in ECG have been still on discussion as criteria. So the second purpose of this study is to evaluate these ischemic ECG changes by exercise T1-MPI analized quantitatively. ST depression (ischemic 1 mm and junctional 2 mm or more), ST elevation (1 mm or more), and coronary T wave reversion in exercise ECG were though to be ischemic changes. (J.P.N.)

The Renewable Energy Directive: biofuels, biomass and sustainable development criteria. How to check in France the compliance of marketed biofuels with sustainability criteria defined by the Directive on renewable energies? (Phase 1: biofuels and bio-liquids)

International Nuclear Information System (INIS)

2009-06-01

After having recalled and commented the main principles of the European directive which sets objectives in terms of renewable energy promotion and consumption, this report analyses the quantitative and qualitative sustainability criteria which must be applied particularly to biofuels and bio-liquids produced from agricultural activities, and their application perspectives. It gives recommendations to assess these criteria. It also comments the modalities used to control the compliance of biofuels with these criteria

The leak before break criteria, requirements and implications

International Nuclear Information System (INIS)

Martinez M, E.

1992-05-01

Inside this work a general balance is made on the Leak before break approach (LBB), like they are the history and licensing, those limitations, the acceptance criteria of the LBB, the current state of the regulatory development and the current state of it application in countries like E.U.A, Germany, Canada, Italy and France. Everything it with the purpose of evaluating the opportunities that offers the LBB criteria for it possible application in Mexico. (Author)

Setting water quality criteria for agricultural water reuse purposes

Directory of Open Access Journals (Sweden)

K. Müller

2017-06-01

Full Text Available The use of reclaimed water for agricultural irrigation is practiced worldwide and will increase in the future. The definition of water quality limits is a useful instrument for the assessment of water quality regarding its suitability for irrigation purposes and the performance of wastewater treatment steps. This study elaborates water quality objectives for a water reuse project in a setting where national guidelines do not exist. Internationally established guidelines are therefore applied to the local context. Additional limits for turbidity, total suspended solids, biochemical and chemical oxygen demand, total phosphorus and potassium are suggested to meet the requirements of water reuse projects. Emphasis is put on water quality requirements prior to UV disinfection and nutrient requirements of cultivated crops. The presented values can be of assistance when monitoring reclaimed water quality. To facilitate the realization of water reuse projects, comprehensive and more detailed information, in particular on water quality requirements prior to disinfection steps, should be provided as well as regarding the protection of the irrigation infrastructure.

Application of quantitative and qualitative methods for determination ...

African Journals Online (AJOL)

This article covers the issues of integration of qualitative and quantitative methods applied when justifying management decision-making in companies implementing lean manufacturing. The authors defined goals and subgoals and justified the evaluation criteria which lead to the increased company value if achieved.

Set of rules SOR 2 reactor site criteria

International Nuclear Information System (INIS)

1976-06-01

The purpose of this set of rules is to describe criteria which guide the Director in his evaluation of the suitability of proposed sites for stationary power and testing reactors subject to SOR 2. (B.G.)

Idaho CERCLA Disposal Facility Complex Waste Acceptance Criteria

Energy Technology Data Exchange (ETDEWEB)

W. Mahlon Heileson

2006-10-01

The Idaho Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Disposal Facility (ICDF) has been designed to accept CERCLA waste generated within the Idaho National Laboratory. Hazardous, mixed, low-level, and Toxic Substance Control Act waste will be accepted for disposal at the ICDF. The purpose of this document is to provide criteria for the quantities of radioactive and/or hazardous constituents allowable in waste streams designated for disposal at ICDF. This ICDF Complex Waste Acceptance Criteria is divided into four section: (1) ICDF Complex; (2) Landfill; (3) Evaporation Pond: and (4) Staging, Storage, Sizing, and Treatment Facility (SSSTF). The ICDF Complex section contains the compliance details, which are the same for all areas of the ICDF. Corresponding sections contain details specific to the landfill, evaporation pond, and the SSSTF. This document specifies chemical and radiological constituent acceptance criteria for waste that will be disposed of at ICDF. Compliance with the requirements of this document ensures protection of human health and the environment, including the Snake River Plain Aquifer. Waste placed in the ICDF landfill and evaporation pond must not cause groundwater in the Snake River Plain Aquifer to exceed maximum contaminant levels, a hazard index of 1, or 10-4 cumulative risk levels. The defined waste acceptance criteria concentrations are compared to the design inventory concentrations. The purpose of this comparison is to show that there is an acceptable uncertainty margin based on the actual constituent concentrations anticipated for disposal at the ICDF. Implementation of this Waste Acceptance Criteria document will ensure compliance with the Final Report of Decision for the Idaho Nuclear Technology and Engineering Center, Operable Unit 3-13. For waste to be received, it must meet the waste acceptance criteria for the specific disposal/treatment unit (on-Site or off-Site) for which it is destined.

Evaluation criteria for communications-related corrective action plans

International Nuclear Information System (INIS)

1997-02-01

This document provides guidance and criteria for US Nuclear Regulatory Commission (NRC) personnel to use in evaluating corrective action plans for nuclear power plant communications. The document begins by describing the purpose, scope, and applicability of the evaluation criteria. Next, it presents background information concerning the communication process, root causes of communication errors, and development and implementation of corrective actions. The document then defines specific criteria for evaluating the effectiveness of the corrective action plan, interview protocols, and an observation protocol related to communication processes. This document is intended only as guidance. It is not intended to have the effect of a regulation, and it does not establish any binding requirements or interpretations of NRC regulations

Automated Transportation Management System (ATMS) V2.0 logistics module PBI acceptance criteria

International Nuclear Information System (INIS)

Weidert, R.S.

1995-01-01

This document defines the acceptance criteria for the Automated Transportation Management System V2.0 Logistics Module Performance Based Incentive (PBI). This acceptance criteria will be the primary basis for the generation of acceptance test procedures. The purpose of this document is to define the minimum criteria that must be fulfilled to guarantee acceptance of the Logistics Module

Criteria of diversity evaluation for intelligent diagnosis of nuclear power plants

International Nuclear Information System (INIS)

Washio, Takashi; Sakuma, Masatake; Furukawa, Hiroshi; Kitamura, Masaharu.

1995-01-01

One of important problems of a current operation support system for a nuclear power plant is that the credibility of its resultant suggestions is not always high sufficiently. The authors have proposed an efficient remedy called 'Diversity Criteria' for this issue in the previous works. It employs a variety of information resources and reasoning mechanisms for the system to enhance its entire credibility. Within this framework, a complementary combination of the resources and mechanisms is desired. The work presented here proposes systematic and quantitative measures determining the appropriate combinations. First, concrete and systematic guidelines are proposed for the detailed criteria of 'Information Diversity' and 'Methodology Diversity'. Next, two concepts of 'Orthogonality of Identified Result' and 'Orthogonality of Utilized Symptom' are presented together with their quantitative measures. These guidelines and measures have been applied to an example of failure diagnosis of a nuclear power plant, and their efficiency has been clearly confirmed. (author)

Comparison of capability of dynamic O2-enhanced MRI and quantitative thin-section MDCT to assess COPD in smokers

International Nuclear Information System (INIS)

Ohno, Yoshiharu; Koyama, Hisanobu; Yoshikawa, Takeshi; Matsumoto, Keiko; Aoyama, Nobukazu; Onishi, Yumiko; Takenaka, Daisuke; Matsumoto, Sumiaki; Nishimura, Yoshihiro; Sugimura, Kazuro

2012-01-01

Purpose: The purpose of this study was to directly and prospectively compare the capability of dynamic O 2 -enhanced MRI and quantitatively assessed thin-section MDCT to assess smokers’ COPD in a large prospective cohort. Materials and methods: The GOLD criteria for smokers were used to classify 187 smokers into four clinical stage groups as follows: smokers without COPD (n = 56) and with mild (n = 54), moderate (n = 52) and severe or very severe COPD (n = 24). All smokers underwent dynamic O 2 -enhanced MRI, MDCT and pulmonary function tests. Mean relative enhancement ratio and mean wash-in time on MRI and CT-based functional lung volume (CT-based FLV) as well as the ratio of airway wall area to total airway area on MDCT were computationally calculated. Then, all indexes were significantly correlated with functional parameters. To determine the efficacy of all indexes for clinical stage classification, the indexes for the four clinical groups were statistically compared by using Tukey's honestly significant difference multiple comparison test. Results: All indexes had significant correlations with functional parameters (p 2 -enhanced MRI for assessment of COPD in smokers is potentially as efficacious as quantitatively assessed thin-section MDCT.

16 CFR 316.3 - Primary purpose.

Science.gov (United States)

2010-01-01

....3 Primary purpose. (a) In applying the term “commercial electronic mail message” defined in the CAN-SPAM Act, 15 U.S.C. 7702(2), the “primary purpose” of an electronic mail message shall be deemed to be... does not intend for these criteria to treat as a “commercial electronic mail message” anything that is...

Environmental Restoration Disposal Facility Waste Acceptance Criteria

International Nuclear Information System (INIS)

Dronen, V.R.

1998-06-01

The Hanford Site is operated by the U. S. Department of Energy (DOE) with a primary mission of environmental cleanup and restoration. The Environmental Restoration Disposal Facility (ERDF) is an integral part of the DOE environmental restoration effort at the Hanford Site. The purpose of this document is to establish the ERDF waste acceptance criteria for disposal of materials resulting from Hanford Site cleanup activities. Definition of and compliance with the requirements of this document will enable implementation of appropriate measures to protect human health and the environment, ensure the integrity of the ERDF liner system, facilitate efficient use of the available space in the ERDF, and comply with applicable environmental regulations and DOE orders. To serve this purpose, the document defines responsibilities, identifies the waste acceptance process, and provides the primary acceptance criteria and regulatory citations to guide ERDF users. The information contained in this document is not intended to repeat or summarize the contents of all applicable regulations

The Ideal Criteria of Supplier Selection for SMEs Food Processing Industry

Directory of Open Access Journals (Sweden)

Ramlan Rohaizan

2016-01-01

Full Text Available Selection of good supplier is important to determine the performance and profitability of SMEs food processing industry. The lack of managerial capability on supplier selection in SMEs food processing industry affects the competitiveness of SMEs food processing industry. This research aims to determine the ideal criteria of supplier for food processing industry using Analytical Hierarchy Process (AHP. The research was carried out in a quantitative method by distributing questionnaires to 50 SMEs food processing industries. The collected data analysed using Expert Choice software to rank the supplier selection criteria. The result shows that criteria for supplier selection are ranked by cost, quality, service, delivery and management and organisation while purchase cost, audit result, defect analysis, transportation cost and fast responsiveness are the first five sub-criteria. The result of this research intends to improve managerial capabilities of SMEs food processing industry in supplier selection.

A framework for developing objective and measurable recovery criteria for threatened and endangered species.

Science.gov (United States)

Himes Boor, Gina K

2014-02-01

For species listed under the U.S. Endangered Species Act (ESA), the U.S. Fish and Wildlife Service and National Marine Fisheries Service are tasked with writing recovery plans that include "objective, measurable criteria" that define when a species is no longer at risk of extinction, but neither the act itself nor agency guidelines provide an explicit definition of objective, measurable criteria. Past reviews of recovery plans, including one published in 2012, show that many criteria lack quantitative metrics with clear biological rationale and are not meeting the measureable and objective mandate. I reviewed how objective, measureable criteria have been defined implicitly and explicitly in peer-reviewed literature, the ESA, other U.S. statutes, and legal decisions. Based on a synthesis of these sources, I propose the following 6 standards be used as minimum requirements for objective, measurable criteria: contain a quantitative threshold with calculable units, stipulate a timeframe over which they must be met, explicitly define the spatial extent or population to which they apply, specify a sampling procedure that includes sample size, specify a statistical significance level, and include justification by providing scientific evidence that the criteria define a species whose extinction risk has been reduced to the desired level. To meet these 6 standards, I suggest that recovery plans be explicitly guided by and organized around a population viability modeling framework even if data or agency resources are too limited to complete a viability model. When data and resources are available, recovery criteria can be developed from the population viability model results, but when data and resources are insufficient for model implementation, extinction risk thresholds can be used as criteria. A recovery-planning approach centered on viability modeling will also yield appropriately focused data-acquisition and monitoring plans and will facilitate a seamless transition

The Hunt for "Indigenous Criteria" in Assessing Communication in the Physiotherapy Workplace

Science.gov (United States)

Elder, Catherine; McNamara, Tim

2016-01-01

Gaining insights from domain experts into how they view communication in real world settings is recognized as an important authenticity consideration in the development of criteria to assess language proficiency for specific academic or occupational purposes. These "indigenous" criteria represent an articulation of the test construct and…

New facility shield design criteria

International Nuclear Information System (INIS)

Howell, W.P.

1981-07-01

The purpose of the criteria presented here is to provide standard guidance for the design of nuclear radiation shields thoughout new facilities. These criteria are required to assure a consistent and integrated design that can be operated safely and economically within the DOE standards. The scope of this report is confined to the consideration of radiation shielding for contained sources. The whole body dose limit established by the DOE applies to all doses which are generally distributed throughout the trunk of the body. Therefore, where the whole body is the critical organ for an internally deposited radionuclide, the whole body dose limit applies to the sum of doses received must assure control of the concentration of radionuclides in the building atmosphere and thereby limit the dose from internal sources

Human factors engineering design review acceptance criteria for the safety parameter display

International Nuclear Information System (INIS)

McGevna, V.; Peterson, L.R.

1981-01-01

This report contains human factors engineering design review acceptance criteria developed by the Human Factors Engineering Branch (HFEB) of the Nuclear Regulatory Commission (NRC) to use in evaluating designs of the Safety Parameter Display System (SPDS). These criteria were developed in response to the functional design criteria for the SPDS defined in NUREG-0696, Functional Criteria for Emergency Response Facilities. The purpose of this report is to identify design review acceptance criteria for the SPDS installed in the control room of a nuclear power plant. Use of computer driven cathode ray tube (CRT) displays is anticipated. General acceptance criteria for displays of plant safety status information by the SPDS are developed. In addition, specific SPDS review criteria corresponding to the SPDS functional criteria specified in NUREG-0696 are established

Evaluation of Coronary Artery Stenosis by Quantitative Flow Ratio During Invasive Coronary Angiography

DEFF Research Database (Denmark)

Westra, Jelmer; Tu, Shengxian; Winther, Simon

2018-01-01

BACKGROUND: Quantitative flow ratio (QFR) is a novel diagnostic modality for functional testing of coronary artery stenosis without the use of pressure wires and induction of hyperemia. QFR is based on computation of standard invasive coronary angiographic imaging. The purpose of WIFI II (Wire...... patients with suspected coronary artery disease on coronary computed tomographic angiography for diagnostic invasive coronary angiography. Fractional flow reserve (FFR) was measured in all segments with 30% to 90% diameter stenosis. Blinded observers calculated QFR (Medis Medical Imaging bv......, The Netherlands) for comparison with FFR. FFR was measured in 292 lesions from 191 patients. Ten (5%) and 9 patients (5%) were excluded because of FFR and angiographic core laboratory criteria, respectively. QFR was successfully computed in 240 out of 255 lesions (94%) with a mean diameter stenosis of 50...

Utility of DWI with quantitative ADC values in ovarian tumors: a meta-analysis of diagnostic test performance.

Science.gov (United States)

Pi, Shan; Cao, Rong; Qiang, Jin Wei; Guo, Yan Hui

2018-01-01

Background Diffusion-weighted imaging (DWI) and quantitative apparent diffusion coefficient (ADC) values are widely used in the differential diagnosis of ovarian tumors. Purpose To assess the diagnostic performance of quantitative ADC values in ovarian tumors. Material and Methods PubMed, Embase, the Cochrane Library, and local databases were searched for studies assessing ovarian tumors using quantitative ADC values. We quantitatively analyzed the diagnostic performances for two clinical problems: benign vs. malignant tumors and borderline vs. malignant tumors. We evaluated diagnostic performances by the pooled sensitivity and specificity values and by summary receiver operating characteristic (SROC) curves. Subgroup analyses were used to analyze study heterogeneity. Results From the 742 studies identified in the search results, 16 studies met our inclusion criteria. A total of ten studies evaluated malignant vs. benign ovarian tumors and six studies assessed malignant vs. borderline ovarian tumors. Regarding the diagnostic accuracy of quantitative ADC values for distinguishing between malignant and benign ovarian tumors, the pooled sensitivity and specificity values were 0.91 and 0.91, respectively. The area under the SROC curve (AUC) was 0.96. For differentiating borderline from malignant tumors, the pooled sensitivity and specificity values were 0.89 and 0.79, and the AUC was 0.91. The methodological quality of the included studies was moderate. Conclusion Quantitative ADC values could serve as useful preoperative markers for predicting the nature of ovarian tumors. Nevertheless, prospective trials focused on standardized imaging parameters are needed to evaluate the clinical value of quantitative ADC values in ovarian tumors.

Using Marking Criteria to Improve Learning: An Evaluation of Student Perceptions

Directory of Open Access Journals (Sweden)

Swapna Koshy

2009-02-01

Full Text Available This paper is an exploratory study on the use of Marking Criteria in the offshore campus of an Australian University in the Middle East. The purpose of the study is to analyse student attitudes to the use of Marking Criteria with a view to maximizing its use. Most educators agree that assessment plays a key role in education and the use of Marking Criteria helps to streamline assessment. The study notes that most students were aware of the benefits of reviewing criteria before they worked on an assessment but few actually used it. The paper offers ways to help students internalise criteria to make learning effective. It also proposes the use of Marking Criteria as a tool that aids teachers in giving feedback in large classes.

Qualitative and quantitative methods in health research

OpenAIRE

V?zquez Navarrete, M. Luisa

2009-01-01

Introduction Research in the area of health has been traditionally dominated by quantitative research. However, the complexity of ill-health, which is socially constructed by individuals, health personnel and health authorities have motivated the search for other forms to approach knowledge. Aim To discuss the complementarities of qualitative and quantitative research methods in the generation of knowledge. Contents The purpose of quantitative research is to measure the magnitude of an event,...

Boys' boarding school management: understanding the choice criteria of parents

Directory of Open Access Journals (Sweden)

Debbie Vigar-Ellis

2013-01-01

Full Text Available The South African secondary boarding school sector has become more competitive as schools attempt to attract and retain pupils. Management of such schools must not only address the educational and boarding needs of pupils, but also apply appropriate management and marketing principles to compete effectively with boarding schools throughout the country and beyond. Customers base their choices ofproducts and services on their perceptions of various offerings available, evaluated according to selection criteria they deem to be important. Marketing theory uses the term "positioning" to describe the process ofconstructing the place that a product occupies in the customer's mind relative to competing products. For schools in this sector to position themselves appropriately, they first need to determine the criteria parents use to evaluate one school against another. This study set out to determine these criteria. A sample of 169 parents and old boys, chosen using the database of a particular boys' boarding school in KwaZulu-Natal (KZN, South Africa, were sent questionnaires. Quantitative analysis was conducted to determine the most important criteria. The top two criteria were found to be a safe environment and competent staff.

QUANTITY DISCOUNTS IN SUPPLIER SELECTION PROBLEM BY USE OF FUZZY MULTI-CRITERIA PROGRAMMING

Directory of Open Access Journals (Sweden)

Tunjo Perić

2011-02-01

Full Text Available Supplier selection in supply chain is a multi-criteria problem that involves a number of quantitative and qualitative factors. This paper deals with a concrete problem of flour purchase by a company that manufactures bakery products and the purchasing price of flour depends on the quantity ordered. The criteria for supplier selection and quantities supplied by individual suppliers are: purchase costs, product quality and reliability of suppliers. The problem is solved using a model that combines revised weighting method and fuzzy multi-criteria linear programming (FMCLP. The paper highlights the efficiency of the proposed methodology in conditions when purchasing prices depend on order quantities.

Tomographic thallium-201 myocardial perfusion scintigrams after maximal coronary artery vasodilation with intravenous dipyridamole: comparison of qualitative and quantitative approaches

International Nuclear Information System (INIS)

Francisco, D.A.; Collins, S.M.; Go, R.T.; Ehrhardt, J.C.; Van Kirk, O.C.; Marcus, M.L.

1982-01-01

Eighty-six patients had thallium-201 ( 201 Tl) myocardial perfusion scintigrams after intense coronary artery dilation with i.v. dipyridamole. Tomographic and planar 201 Tl scintigrams were obtained in each patient. Tomographic scintigrams were interpreted using quantitative or visual criteria; planar scintigrams were assessed using visual criteria only. When visual criteria were used, interobserver variability was 40% for tomographic scintigrams and 44% for planar scintigrams. In the 24 patients with normal or nonsignificant CAD, quantitative analysis of the tomograms (range approach) indicated that one of 24 (4%) had a positive image (specificity 96%%); in contrast, when visual criteria were used to interpret the tomographic or planar 201 Tl scintigrams, eight of 24 (33%) had positive scintigrams (specificity 67%). In the 51 abnormal patients, the sensitivity of detecting CAD was 46 of 51 (90%) for tomographic scintigrams interpreted quantitatively, 39 of 51 (76%) for tomographic scintigrams interpreted visually and 41 of 51 (80%) for planar scintigrams assessed visually. The tomographic imaging procedure (quantitative interpretation) also demonstrated a high sensitivity (89%) and specificity (100%) in 28 patients (10 normal and 18 CAD), with a clinical diagnosis of unstable angina pectoris. Overall, the predictive accuracy of an abnormal scintigram with quantitative tomographic imaging (98%) was significantly better (p<0.05) than either qualitative planar or pinhole imaging

HWVP compliance with the Hanford site solid waste acceptance criteria

International Nuclear Information System (INIS)

Bromm, R.; Ornelas, J.; Fundingsland, S.; Shah, K.

1993-01-01

In order to ensure that the Hanford Waste Vitrification Project (HWVP) will meet solid waste acceptance criteria, a review of the criteria was performed. The primary purpose of the study was to evaluate the modifications that will be required to bring the HWVP into compliance for secondary waste which will be generated during normal operations of the facility. To accomplish this objective, the current HWVP design was evaluated based on the criteria established. Once the non-compliance areas and potentially non-compliance areas were identified, alternative plant design modifications were proposed. This paper summarizes the results and recommendations of that study

MDS clinical diagnostic criteria for Parkinson's disease in China.

Science.gov (United States)

Li, Jun; Jin, Miao; Wang, Li; Qin, Bin; Wang, Kang

2017-03-01

The Movement Disorder Society Clinical Diagnostic Criteria for Parkinson's disease (MDS-PD Criteria) was introduced by the Movement Disorder Society in 2015 for research purposes. However, its use for clinical diagnosis of Parkinson disease still needs further revision. This study compares the UK-Criteria versus MDS-PD Criteria in the clinical diagnosis of Parkinson disease referred to the China-Japan Friendship Hospital of Beijing, China. To compare the MDS-PD Criteria with the UK-Criteria and discuss the feasibility of the clinical application of MDS-PD Criteria as a general guide to clinical diagnosis of PD in Chinese PD patients. 150 patients of neurology clinic of China-Japan Friendship Hospital of Beijing were recruited in our research. They were divided into three groups: UK-Criteria group, MDS-PD Criteria group and a combined group of UK and MDS-PD Criteria. Clinical history was collected while physical and auxiliary examinations were done by a trained neurologist according to the corresponding criteria. An interrater reliability analysis using the Kappa statistic claimed substantial agreement (κ = 0.626) between the MDS-PD Criteria and the UK-Criteria. The differences between the diagnostic results of these two criteria were statistically significant by paired Chi-square test (p = 0.000). It was found that levodopa-induced dyskinesia had a good positive predictive value, while early bulbar impairment and inspiratory dysfunction presented a negative predictive value. The MDS-PD Criteria emphasize the importance of non-motor symptoms, keeping the motor symptoms as the core for the clinical diagnosis of PD, and establish categories of diagnosis features and levels of certainty which are more complete and organized to be used and replicated by non specialized physicians to evaluated patients with Parkinsonism. The higher sensitivity of MDS-PD Criteria compared with UK-Criteria is worth being widely used in clinical work.

Applying quantitative benefit-risk analysis to aid regulatory decision making in diagnostic imaging: methods, challenges, and opportunities.

Science.gov (United States)

Agapova, Maria; Devine, Emily Beth; Bresnahan, Brian W; Higashi, Mitchell K; Garrison, Louis P

2014-09-01

Health agencies making regulatory marketing-authorization decisions use qualitative and quantitative approaches to assess expected benefits and expected risks associated with medical interventions. There is, however, no universal standard approach that regulatory agencies consistently use to conduct benefit-risk assessment (BRA) for pharmaceuticals or medical devices, including for imaging technologies. Economics, health services research, and health outcomes research use quantitative approaches to elicit preferences of stakeholders, identify priorities, and model health conditions and health intervention effects. Challenges to BRA in medical devices are outlined, highlighting additional barriers in radiology. Three quantitative methods--multi-criteria decision analysis, health outcomes modeling and stated-choice survey--are assessed using criteria that are important in balancing benefits and risks of medical devices and imaging technologies. To be useful in regulatory BRA, quantitative methods need to: aggregate multiple benefits and risks, incorporate qualitative considerations, account for uncertainty, and make clear whose preferences/priorities are being used. Each quantitative method performs differently across these criteria and little is known about how BRA estimates and conclusions vary by approach. While no specific quantitative method is likely to be the strongest in all of the important areas, quantitative methods may have a place in BRA of medical devices and radiology. Quantitative BRA approaches have been more widely applied in medicines, with fewer BRAs in devices. Despite substantial differences in characteristics of pharmaceuticals and devices, BRA methods may be as applicable to medical devices and imaging technologies as they are to pharmaceuticals. Further research to guide the development and selection of quantitative BRA methods for medical devices and imaging technologies is needed. Copyright © 2014 AUR. Published by Elsevier Inc. All rights

Detection capabilities and accuracy requirements of concentrations of radioactive material in air for radiation protection purposes

International Nuclear Information System (INIS)

Brodsky, A.

1987-01-01

Recent developments in the formulation of detection capability and accuracy criteria for bioassay measurements will be interpreted and adapted to provide similar criteria for the measurement of air concentrations of radioactive material for radiation protection purposes. Considerations of accuracy will be related to the known variability of measurement processes, as well as the uncertainties in the calculated limits of intake that serve as the basis of regulatory and voluntary standards of practice. Formulations and criteria will be presented for minimum detection amounts (MDA) and precision and bias of measurements for radiation protection purposes. 17 references

Analysis association of milk fat and protein percent in quantitative ...

African Journals Online (AJOL)

Analysis association of milk fat and protein percent in quantitative trait locus ... African Journal of Biotechnology ... Protein and fat percent as content of milk are high-priority criteria for financial aims and selection of programs in dairy cattle.

Inelastic analysis acceptance criteria for radioactive material transportation containers

International Nuclear Information System (INIS)

Ammerman, D.J.; Ludwigsen, J.S.

1993-01-01

The design criteria currently used in the design of radioactive material (RAM) transportation containers are taken from the ASME Boiler and Pressure Vessel Code (ASME, 1992). These load-based criteria are ideally suited for pressure vessels where the loading is quasistatic and all stresses are in equilibrium with externally applied loads. For impact events, the use of load-based criteria is less supportable. Impact events tend to be energy controlled, and thus, energy-based acceptance criteria would appear to be more appropriate. Determination of an ideal design criteria depends on what behavior is desired. Currently there is not a design criteria for inelastic analysis for RAM nation packages that is accepted by the regulatory agencies. This lack of acceptance criteria is one of the major factors in limiting the use of inelastic analysis. In this paper inelastic analysis acceptance criteria based on stress and strain-energy density will be compared for two stainless steel test units subjected to impacts onto an unyielding target. Two different material models are considered for the inelastic analysis, a bilinear fit of the stress-strain curve and a power law hardening model that very closely follows the stress-strain curve. It is the purpose of this paper to stimulate discussion and research into the area of strain-energy density based inelastic analysis acceptance criteria

Application of a Framework to Assess the Usefulness of Alternative Sepsis Criteria.

Science.gov (United States)

Seymour, Christopher W; Coopersmith, Craig M; Deutschman, Clifford S; Gesten, Foster; Klompas, Michael; Levy, Mitchell; Martin, Gregory S; Osborn, Tiffany M; Rhee, Chanu; Warren, David K; Watson, R Scott; Angus, Derek C

2016-03-01

The current definition of sepsis is life-threatening, acute organ dysfunction secondary to a dysregulated host response to infection. Criteria to operationalize this definition can be judged by six domains of usefulness (reliability, content, construct and criterion validity, measurement burden, and timeliness). The relative importance of these six domains depends on the intended purpose for the criteria (clinical care, basic and clinical research, surveillance, or quality improvement [QI] and audit). For example, criteria for clinical care should have high content and construct validity, timeliness, and low measurement burden to facilitate prompt care. Criteria for surveillance or QI/audit place greater emphasis on reliability across individuals and sites and lower emphasis on timeliness. Criteria for clinical trials require timeliness to ensure prompt enrollment and reasonable reliability but can tolerate high measurement burden. Basic research also tolerates high measurement burden and may not need stability over time. In an illustrative case study, we compared examples of criteria designed for clinical care, surveillance and QI/audit among 396,241 patients admitted to 12 academic and community hospitals in an integrated health system. Case rates differed four-fold and mortality three-fold. Predictably, clinical care criteria, which emphasized timeliness and low burden and therefore used vital signs and routine laboratory tests, had the greater case identification with lowest mortality. QI/audit criteria, which emphasized reliability and criterion validity, used discharge information and had the lowest case identification with highest mortality. Using this framework to identify the purpose and apply domains of usefulness can help with the evaluation of existing sepsis diagnostic criteria and provide a roadmap for future work.

A scoring system for appraising mixed methods research, and concomitantly appraising qualitative, quantitative and mixed methods primary studies in Mixed Studies Reviews.

Science.gov (United States)

Pluye, Pierre; Gagnon, Marie-Pierre; Griffiths, Frances; Johnson-Lafleur, Janique

2009-04-01

A new form of literature review has emerged, Mixed Studies Review (MSR). These reviews include qualitative, quantitative and mixed methods studies. In the present paper, we examine MSRs in health sciences, and provide guidance on processes that should be included and reported. However, there are no valid and usable criteria for concomitantly appraising the methodological quality of the qualitative, quantitative and mixed methods studies. To propose criteria for concomitantly appraising the methodological quality of qualitative, quantitative and mixed methods studies or study components. A three-step critical review was conducted. 2322 references were identified in MEDLINE, and their titles and abstracts were screened; 149 potentially relevant references were selected and the full-text papers were examined; 59 MSRs were retained and scrutinized using a deductive-inductive qualitative thematic data analysis. This revealed three types of MSR: convenience, reproducible, and systematic. Guided by a proposal, we conducted a qualitative thematic data analysis of the quality appraisal procedures used in the 17 systematic MSRs (SMSRs). Of 17 SMSRs, 12 showed clear quality appraisal procedures with explicit criteria but no SMSR used valid checklists to concomitantly appraise qualitative, quantitative and mixed methods studies. In two SMSRs, criteria were developed following a specific procedure. Checklists usually contained more criteria than needed. In four SMSRs, a reliability assessment was described or mentioned. While criteria for quality appraisal were usually based on descriptors that require specific methodological expertise (e.g., appropriateness), no SMSR described the fit between reviewers' expertise and appraised studies. Quality appraisal usually resulted in studies being ranked by methodological quality. A scoring system is proposed for concomitantly appraising the methodological quality of qualitative, quantitative and mixed methods studies for SMSRs. This

An analysis of project selection and assignment criteria of danish tenders in europe

DEFF Research Database (Denmark)

Larsen, Jesper Kranker; Ussing, Lene Faber; Brunø, Thomas Ditlev

2013-01-01

, and 3/ any significant difference between the use of selection and assignment criteria in Danish public construction projects. The study uses a quantitative research approach where 157 Danish public tender cases were selected from the European Tenders Electronic Daily database between the period...

A Framework for the Development and Interpretation of Different Sepsis Definitions and Clinical Criteria.

Science.gov (United States)

Angus, Derek C; Seymour, Christopher W; Coopersmith, Craig M; Deutschman, Clifford S; Klompas, Michael; Levy, Mitchell M; Martin, Gregory S; Osborn, Tiffany M; Rhee, Chanu; Watson, R Scott

2016-03-01

Although sepsis was described more than 2,000 years ago, and clinicians still struggle to define it, there is no "gold standard," and multiple competing approaches and terms exist. Challenges include the ever-changing knowledge base that informs our understanding of sepsis, competing views on which aspects of any potential definition are most important, and the tendency of most potential criteria to be distributed in at-risk populations in such a way as to hinder separation into discrete sets of patients. We propose that the development and evaluation of any definition or diagnostic criteria should follow four steps: 1) define the epistemologic underpinning, 2) agree on all relevant terms used to frame the exercise, 3) state the intended purpose for any proposed set of criteria, and 4) adopt a scientific approach to inform on their usefulness with regard to the intended purpose. Usefulness can be measured across six domains: 1) reliability (stability of criteria during retesting, between raters, over time, and across settings), 2) content validity (similar to face validity), 3) construct validity (whether criteria measure what they purport to measure), 4) criterion validity (how new criteria fare compared to standards), 5) measurement burden (cost, safety, and complexity), and 6) timeliness (whether criteria are available concurrent with care decisions). The relative importance of these domains of usefulness depends on the intended purpose, of which there are four broad categories: 1) clinical care, 2) research, 3) surveillance, and 4) quality improvement and audit. This proposed methodologic framework is intended to aid understanding of the strengths and weaknesses of different approaches, provide a mechanism for explaining differences in epidemiologic estimates generated by different approaches, and guide the development of future definitions and diagnostic criteria.

Position paper: Seismic design criteria

International Nuclear Information System (INIS)

Farnworth, S.K.

1995-01-01

The purpose of this paper is to document the seismic design criteria to be used on the Title 11 design of the underground double-shell waste storage tanks and appurtenant facilities of the Multi-Function Waste Tank Facility (MWTF) project, and to provide the history and methodologies for determining the recommended Design Basis Earthquake (DBE) Peak Ground Acceleration (PGA) anchors for site-specific seismic response spectra curves. Response spectra curves for use in design are provided in Appendix A

Qualitative acceptance criteria for radioactive wastes to be disposed of in deep geological formations

International Nuclear Information System (INIS)

1990-05-01

The present Safety Guide has to be seen as a companion document to the IAEA Safety Series No. 99. It is concerned with the waste form which is an important component of the overall disposal system. Because of the broad range of waste types and conditioned forms and variations in the sites, designs and constructional approaches being considered for deep geological repositories, this report necessarily approaches the waste acceptance criteria in a general way, recognizing that the assignment of quantitative limits to these criteria has to be the responsibility of national authorities. The main objective of this Safety Guide is to set out qualitative waste acceptance criteria as a basis for specifying quantitative limits for the waste forms and packages which are intended to be disposed of in deep geological repositories. It should serve as guidance for assigning such parameter values which would fully comply with the safety assessment and performance of a waste disposal system as a whole. This document is intended to serve both national authorities and regulatory bodies involved in the development of deep underground disposal systems. The qualitative waste acceptance criteria dealt with in the present Safety Guide are primarily concerned with the disposal of high level, intermediate level and long-lived alpha bearing wastes in deep geological repositories. Although some criteria are also applicable in other waste disposal concepts, it has to be borne in mind that the set of criteria presented here shall ensure the isolation capability of a waste disposal system for periods of time much longer than for other waste streams with shorter lifetimes. 51 refs, 1 tab

Topic Variability and Criteria in Interpretational History Teaching

Science.gov (United States)

Wansink, Bjorn; Akkerman, Sanne; Wubbels, Theo

2017-01-01

This paper studies the teacher perceived applicability of historical topics for interpretational history teaching and the criteria teachers use to evaluate this applicability. For this study, 15 expert history teachers in the Netherlands striving for interpretational history teaching were purposefully selected. Teachers were asked to mention…

Analysis association of milk fat and protein percent in quantitative ...

African Journals Online (AJOL)

SAM

2014-05-14

May 14, 2014 ... African Journal of Biotechnology. Full Length ... quantitative trait locus (QTLs) on chromosomes 1, 6, 7 and 20 in ... Protein and fat percent as content of milk are high-priority criteria for financial aims and selection of programs ...

Sustainable transport project evaluation and decision support: indicators and planning criteria for sustainable development

DEFF Research Database (Denmark)

Salling, Kim Bang; Pryn, Marie Ridley

2015-01-01

is adopted. The SUSTAIN-DSS model rests upon multi-criteria decision analysis and planning workshops in order to combine the use of qualitative and quantitative assessments. This article stresses the necessity of revising current planning paradigms such as cost-benefit analysis (CBA) but also to make clear......This article will expose the necessity for a sustainable planning and decision support framework for transport infrastructure assessment. This will be operationalized through a set of planning criteria and scenario alternatives, which is assessed in the SUSTAIN decision support system (SUSTAIN......-DSS) model. A part of the decision support framework will be tested in a case study in Denmark, concerning the problem of congestion on the current bridge crossing Roskilde Fjord in the city of Frederikssund. This article suggests including in a combination both reference class forecasting and quantitative...

A comparative study between subjective assessment and quantitative evaluation of CT findings with cerebral palsy

International Nuclear Information System (INIS)

Sugie, Yoko; Sugie, Hideo; Kitai, Akiko; Maruyama, Hiroshi; Fukuyama, Yukio

1982-01-01

Computed tomography (CT) was performed on 200 children with children palsy with Hitachi CT-H250. The CT scans of 136 cases revealed cerebral atrophy with ventricular and/or subarachnoid space enlargement. The lateral ventricles, the third ventricle and the two parts of subarachnoid space on the CT picture were subjectively evaluated and divided into five grades ranging from no enlargement to marked enlargement. In addition, the size of the ventricles and the subarachnoid spaces were quantitatively determined; the transverse diameter of brain (b), the largest width of the anterior horns of the lateral ventricles (c), the bicaudate nuclear distance (d), the greatest width of the third ventricle, the longitudinal cerebral fissure and sylvian fissures as described by Miyao et al. (1978). Comparison of these quantitative techniques confirmed the initial subjective evaluation. However, in some cases, amendment of the subjective evaluation was needed. As mentioned before (Miyao et al.), the cerebral longitudinal fissure was relatively wide in normal infants. Accordingly, it was often difficult to find out abnormal widening only by subjective evaluation. The purpose of this paper was to establish the criteria of quantitative measuring and assessing of the lateral and third ventricles, the cerebral longitudinal fissurem, and the sylvian fissures enlargement. Interpretation of some problem cases associated with measuring was also discussed. The quantitative CT evaluation may be a good reference in assessing cerebral atrophy in cerebral palsy and other neurological diseases. (author)

Multi-Criterion Two-Sided Matching of Public–Private Partnership Infrastructure Projects: Criteria and Methods

Directory of Open Access Journals (Sweden)

Ru Liang

2018-04-01

Full Text Available Two kinds of evaluative criteria are associated with Public–Private Partnership (PPP infrastructure projects, i.e., private evaluative criteria and public evaluative criteria. These evaluative criteria are inversely related, that is, the higher the public benefits; the lower the private surplus. To balance evaluative criteria in the Two-Sided Matching (TSM decision, this paper develops a quantitative matching decision model to select an optimal matching scheme for PPP infrastructure projects based on the Hesitant Fuzzy Set (HFS under unknown evaluative criterion weights. In the model, HFS is introduced to describe values of the evaluative criteria and multi-criterion information is fully considered given by groups. The optimal model is built and solved by maximizing the whole deviation of each criterion so that the evaluative criterion weights are determined objectively. Then, the match-degree of the two sides is calculated and a multi-objective optimization model is introduced to select an optimal matching scheme via a min-max approach. The results provide new insights and implications of the influence on evaluative criteria in the TSM decision.

Quantitative reactive modeling and verification.

Science.gov (United States)

Henzinger, Thomas A

Formal verification aims to improve the quality of software by detecting errors before they do harm. At the basis of formal verification is the logical notion of correctness , which purports to capture whether or not a program behaves as desired. We suggest that the boolean partition of software into correct and incorrect programs falls short of the practical need to assess the behavior of software in a more nuanced fashion against multiple criteria. We therefore propose to introduce quantitative fitness measures for programs, specifically for measuring the function, performance, and robustness of reactive programs such as concurrent processes. This article describes the goals of the ERC Advanced Investigator Project QUAREM. The project aims to build and evaluate a theory of quantitative fitness measures for reactive models. Such a theory must strive to obtain quantitative generalizations of the paradigms that have been success stories in qualitative reactive modeling, such as compositionality, property-preserving abstraction and abstraction refinement, model checking, and synthesis. The theory will be evaluated not only in the context of software and hardware engineering, but also in the context of systems biology. In particular, we will use the quantitative reactive models and fitness measures developed in this project for testing hypotheses about the mechanisms behind data from biological experiments.

Evaluation Criteria for Interactive E-Books for Open and Distance Learning

Science.gov (United States)

Bozkurt, Aras; Bozkaya, Mujgan

2015-01-01

The aim of this mixed method study is to identify evaluation criteria for interactive e-books. To find answers for the research questions of the study, both quantitative and qualitative data were collected through a four-round Delphi study with a panel consisting of 30 experts. After that, a total of 20 interactive e-books were examined with…

Reflexive criteria of sociological research

Directory of Open Access Journals (Sweden)

R T Ubaydullaeva

2014-12-01

Full Text Available The article is devoted to the sociological criteria of explaining the way of thinking and actions of subjects, their spiritual and moral positions and intellectual forces that form the laws of social life. The author seeks to adapt such categories as ‘meaning of life’, ‘human dignity’, ‘rationality’ etc. for the purposes of sociological analysis by methodological construction of some real life dichotomies such as ‘subjective meaning and social function’, ‘the real and the ideal’, ‘the demanded and the excluded’. Thus, the author studies economic, political and technical processes in terms of both positivity and negativity of social interaction and states that given the increasing differentiation of the society and the contradictory trends of social development the reflexive criteria that take into account the socio-cultural nature of the man help to find one’s own model of development.

The study on safety facility criteria for radioactive waste repository

International Nuclear Information System (INIS)

Lee, S. H.; Choi, M. H.; Han, S. H. and others

1992-12-01

The radioactive waste repository are necessary to install the engineered safety systems to secure the safety for operation of the repository in the event of fire and earthquake. Since the development of safety facility criteria requires a thorough understanding about the characteristics of the engineered safety systems, we should investigate by means of literature survey and visit SKB. In particular, definition, composition of the systems, functional requirement of the systems, engineered safety systems of foreign countries, system design, operation and maintenance requirement should be investigated : fire protection system, ventilation system, drainage system, I and C system, electric system, radiation monitoring system. This proposed criteria consist of purpose, scope of application, ventilation system, fire protection system, drainage system, electric system and this proposed criteria can be applied as a basic reference for the final criteria

The quantitative modelling of human spatial habitability

Science.gov (United States)

Wise, J. A.

1985-01-01

A model for the quantitative assessment of human spatial habitability is presented in the space station context. The visual aspect assesses how interior spaces appear to the inhabitants. This aspect concerns criteria such as sensed spaciousness and the affective (emotional) connotations of settings' appearances. The kinesthetic aspect evaluates the available space in terms of its suitability to accommodate human movement patterns, as well as the postural and anthrometric changes due to microgravity. Finally, social logic concerns how the volume and geometry of available space either affirms or contravenes established social and organizational expectations for spatial arrangements. Here, the criteria include privacy, status, social power, and proxemics (the uses of space as a medium of social communication).

The use of information technology security assessment criteria to protect specialized computer systems

International Nuclear Information System (INIS)

Lykov, V.A.; Shein, A.V.; Piskarev, A.S.; Devaney, D.M.; Melton, R.B.; Hunteman, W.J.; Prommel, J.M.; Rothfuss, J.S.

1997-01-01

The purpose of this paper is to discuss the information security assessment criteria used in Russia and compare it with that used in the United States. The computer system security assessment criteria utilized by the State Technical Commission of Russia and similar criteria utilized by the US Department of Defense (TCSEC) are intended for the development and implementation of proven methods for achieving a required level of information security. These criteria are utilized, first and foremost, when conducting certification assessments of general purpose systems. The Russian Federation is creating specialized systems for nuclear material control and accountancy (MC and A) within the framework of the international laboratory-to-laboratory collaboration. Depending on the conditions in which the MC and A system is intended to operate, some of the criteria and the attendant certification requirements may exceed those established or may overlap the requirements established for attestation of such systems. In this regard it is possible to modify the certification and attestation requirements depending on the conditions in which a system will operate in order to achieve the ultimate goal--implementation of the systems in the industry

Criteria: waste tank isolation and stabilization

Energy Technology Data Exchange (ETDEWEB)

Metz, W.P.; Ogren, W.E.

1976-09-01

The crystallized Hanford high-level wastes stored in single-shell underground tanks consist of sludges and salt cakes covered with supernatural liquor. Purpose of stabilization and isolation is to reduce the releases and losses as a result of a loss of tank integrity. The tanks will be modified so that no inadvertent liquid additions can be made. Criteria for the isolation and stabilization are given and discussed briefly. (DLC)

Criteria: waste tank isolation and stabilization

International Nuclear Information System (INIS)

Metz, W.P.; Ogren, W.E.

1976-09-01

The crystallized Hanford high-level wastes stored in single-shell underground tanks consist of sludges and salt cakes covered with supernatural liquor. Purpose of stabilization and isolation is to reduce the releases and losses as a result of a loss of tank integrity. The tanks will be modified so that no inadvertent liquid additions can be made. Criteria for the isolation and stabilization are given and discussed briefly

Risk based microbiological criteria for Campylobacter in broiler meat in the European Union

DEFF Research Database (Denmark)

Nauta, Maarten; Sanaa, Moez; Havelaar, Arie H.

2012-01-01

Quantitative microbiological risk assessment (QMRA) allows evaluating the public health impact of food safety targets to support the control of foodborne pathogens. We estimate the risk reduction of setting microbiological criteria (MCs) for Campylobacter on broiler meat in 25 European countries......, applying quantitative data from the 2008 EU baseline survey. We demonstrate that risk based MCs can be derived without explicit consideration of Food Safety Objectives or Performance Objectives. Published QMRA models for the consumer phase and dose response provide a relation between Campylobacter...

Validation criteria of an internal dosimetry laboratory in vivo; Criterios para la validacion de un laboratorio de dosimetria interna in vivo

Energy Technology Data Exchange (ETDEWEB)

Alfaro L, M. de las M., E-mail: mercedes.alfaro@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

2014-10-15

People working with radioactive materials, under certain circumstances (e.g. not using the proper protective equipment, an incident not covered, etc.) could be incorporated into the body. The radiation protection programs include direct measurement methods -in vivo- or indirect -in vitro- or both, to know that radioactive material is incorporated into the body. The monitoring measurements of internal contamination or (Radio-bioassay) are carried out with the purpose of determining the amount of radioactive material incorporated in the body; estimate the effective dose and committed dose; management administration of radiation protection; appropriate medical management; and to provide the data necessary for the legal requirements and the preservation of records. The measurement methods used in the monitoring of internal contamination must be validated by the combination of the following processes: calibration, using standards reference materials and/or simulators; execute systematic research, using control samples; and intercomparison between laboratories and performance tests. In this paper the validation criteria of an internal dosimetry laboratory in vivo are presented following the information provided by the standard ANSI N13-30-1996 and ISO/TEC 17025-2005 as are the criteria of facilities, staff training, interpretation of measurements, performance criteria for monitoring of internal contamination in vivo, results reporting and records retention. Thereby we achieve standardized quantitative performance criteria of truthfulness, accuracy and detection limit and a consensus on statistical definitions to establish the validation plan of a monitoring laboratory of internal contamination in vivo. (Author)

Derivative criteria of plasticity anddurability of metal materials

Directory of Open Access Journals (Sweden)

Gustov Yuriy Ivanovich

Full Text Available Criteria of plasticity and durability derivative of standard indicators of plasticity (δ, ψ and durability (σ , σ are offered. Criteria К and К follow from the equation of relative indicators of durability and plasticity. The purpose of the researches is the establishment of interrelation of derivative criteria with the Page indicator. The values of derivative criteria were defined for steels 50X and 50XH after processing by cold, and also for steels 50G2 and 38HGN after sorbitizing. It was established that the sum of the offered derivative criteria of plasticity and durability С considered for the steels is almost equal to unit and corresponds to a square root of relative durability and plasticity criterion C . Both criteria testify to two-unity opposite processes of deformation and resistance to deformation. By means of the equations for S and С it is possible to calculate an indicator of uniform plastic deformation of σ and through it to estimate synergetic criteria - true tension and specific energy of deformation and destruction of metal materials. On the basis of the received results the expressions for assessing the uniform and concentrated components of plastic deformation are established. The preference of the dependence of uniform relative lengthening from a cubic root of criterion К , and also to work of the criteria of relative lengthening and relative durability is given. The advantage of the formulas consists in simplicity and efficiency of calculation, in ensuring necessary accuracy of calculation of the size δ for the subsequent calculation of structural and power (synergetic criteria of reliability of metals.

Quantitative Phase Determination by Using a Michelson Interferometer

Science.gov (United States)

Pomarico, Juan A.; Molina, Pablo F.; D'Angelo, Cristian

2007-01-01

The Michelson interferometer is one of the best established tools for quantitative interferometric measurements. It has been, and is still successfully used, not only for scientific purposes, but it is also introduced in undergraduate courses for qualitative demonstrations as well as for quantitative determination of several properties such as…

Development of a quantitative risk standard

International Nuclear Information System (INIS)

Temme, M.I.

1982-01-01

IEEE Working Group SC-5.4 is developing a quantitative risk standard for LWR plant design and operation. The paper describes the Working Group's conclusions on significant issues, including the scope of the standard, the need to define the process (i.e., PRA calculation) for meeting risk criteria, the need for PRA quality requirements and the importance of distinguishing standards from goals. The paper also describes the Working Group's approach to writing this standard

A generic approach for containment success criteria under severe accident loads

International Nuclear Information System (INIS)

Sammataro, R.F.; Solonick, W.R.; Edwards, N.W.

1992-01-01

The U.S. Department of Energy (DOE), Office of New Production Reactors (NP), has identified safety as the foremost design criterion for the Heavy Water New Production Reactor (NPR-HWR). The DOE-NP has issued the Deterministic Severe Accident Criteria (DSACs) to guide the design of the NPR-HWR containment for resistance to severe accidents. The DSAC concept provides for a generic approach for success criteria to predict the threshold of containment failure under severe accident loads. This concept consists of two parts: (1) Problem Statements that are qualitative and quantitative bases for calculating associated loadings and containment response to those loadings, and (2) Success Criteria that specify acceptable containment response measures and limits for each problem statement. This paper is limited to a discussion of a generic approach for containment success criteria. The main elements of these success criteria are expressed in terms of elastic stresses and inelastic strains. Containment performance is based on the best estimate of failure as predicted by either stress or strain, buckling, displacements, or ability to withstand missile perforation. Since these limits are best estimates of failure, no conservatism exists in these success criteria. Rather, conservatism is to be provided in the problem statements, i.e., the quantified severe accident loads. These success criteria are presented on a multi-tiered basis for static pressure and temperature loadings, dynamic loadings, and missiles. Within the static pressure and temperature loadings and the dynamic loadings, the criteria are separated into elastic analysis success criteria and inelastic analysis success criteria. Each of these areas, in turn, defines limits on either the stress or strain measures as well as on measures for buckling and displacements

State-of-the-Art Prescriptive Criteria Weight Elicitation

Directory of Open Access Journals (Sweden)

Mona Riabacke

2012-01-01

Full Text Available Comparatively few of the vast amounts of decision analytical methods suggested have been widely spread in actual practice. Some approaches have nevertheless been more successful in this respect than others. Quantitative decision making has moved from the study of decision theory founded on a single criterion towards decision support for more realistic decision-making situations with multiple, often conflicting, criteria. Furthermore, the identified gap between normative and descriptive theories seems to suggest a shift to more prescriptive approaches. However, when decision analysis applications are used to aid prescriptive decision-making processes, additional demands are put on these applications to adapt to the users and the context. In particular, the issue of weight elicitation is crucial. There are several techniques for deriving criteria weights from preference statements. This is a cognitively demanding task, subject to different biases, and the elicited values can be heavily dependent on the method of assessment. There have been a number of methods suggested for assessing criteria weights, but these methods have properties which impact their applicability in practice. This paper provides a survey of state-of-the-art weight elicitation methods in a prescriptive setting.

Progress towards the specification of embodied energy performance criteria for New Zealand buildings

Energy Technology Data Exchange (ETDEWEB)

Baird, G.; Alcorn, A.; Wood, P.; Storey, J. B. [Victoria Univ., Wellington (New Zealand). School of Architecture; Jaques, R. [Building Research Association of New Zealand, Inc. (New Zealand)

1998-11-01

Incorporation of embodied energy performance criteria into New Zealand`s recently adopted performance-based building code is discussed. The paper also describes the concept of the Building Code and its energy related clauses and standards, work done to date to update the building materials` energy coefficients, and the progress made in using an embodied energy database. The purpose, desirability and likely pitfalls of such criteria, ways of specifying minimum performance, and relationships with operating energy criteria are also reviewed.

Investment Portfolio Formation Using Multi-criteria evaluation Method MULTIMOORA

Directory of Open Access Journals (Sweden)

Vilius Vaišvilas

2017-06-01

Full Text Available Information that has to be analyzed by investors is complicated and can be interpreted differently by different people, which is why choosing what should be added to the investment portfolio is complicated task. Complexity grows substantially when there are more alternatives to choose from. Multi – criteria evaluation method can be used to choose the best alternatives. Multi–criteria evaluation method MULTIMOORA is not subjective because there is no need to decide ratio of any given variable that is evaluated. MULTIMOORA consists of: formation of ratio system, application of multi – criteria evaluation method as well as investment evaluation and ranking. Purpose of this article is to apply multi – criteria evaluation method MULTIMOORA for the formation and management of investment portfolio from stocks of the Baltic stock market companies. Methods used in the analysis for the article: analysis of scientific literature, statistical analysis, organization and comparison of data, idealization, calculations of MULTIMOORA.

12 CFR 202.8 - Special purpose credit programs.

Science.gov (United States)

2010-01-01

... requirements of paragraph (a) of this section, a creditor may request and consider information regarding the... the case of financial need. If financial need is one of the criteria under a special purpose credit.... Subject to the provisions of paragraph (b) of this section, the Act and this regulation permit a creditor...

Multi-criteria objective based climate change impact assessment for multi-purpose multi-reservoir systems

Science.gov (United States)

Müller, Ruben; Schütze, Niels

2014-05-01

Water resources systems with reservoirs are expected to be sensitive to climate change. Assessment studies that analyze the impact of climate change on the performance of reservoirs can be divided in two groups: (1) Studies that simulate the operation under projected inflows with the current set of operational rules. Due to non adapted operational rules the future performance of these reservoirs can be underestimated and the impact overestimated. (2) Studies that optimize the operational rules for best adaption of the system to the projected conditions before the assessment of the impact. The latter allows for estimating more realistically future performance and adaption strategies based on new operation rules are available if required. Multi-purpose reservoirs serve various, often conflicting functions. If all functions cannot be served simultaneously at a maximum level, an effective compromise between multiple objectives of the reservoir operation has to be provided. Yet under climate change the historically preferenced compromise may no longer be the most suitable compromise in the future. Therefore a multi-objective based climate change impact assessment approach for multi-purpose multi-reservoir systems is proposed in the study. Projected inflows are provided in a first step using a physically based rainfall-runoff model. In a second step, a time series model is applied to generate long-term inflow time series. Finally, the long-term inflow series are used as driving variables for a simulation-based multi-objective optimization of the reservoir system in order to derive optimal operation rules. As a result, the adapted Pareto-optimal set of diverse best compromise solutions can be presented to the decision maker in order to assist him in assessing climate change adaption measures with respect to the future performance of the multi-purpose reservoir system. The approach is tested on a multi-purpose multi-reservoir system in a mountainous catchment in Germany. A

Quality, merit, aesthetics and purpose: an inquiry into EU copyright law's eschewal of other criteria than originality

NARCIS (Netherlands)

van Gompel, S.; Lavik, E.

2013-01-01

This article examines the rule that no other criteria than originality shall be applied to determine the eligibility for protection of works, as contained in a few EU Directives on copyright (i.e. the Computer Programs Directive, the Term Directive and the Database Directive). While aimed to

A Quantitative Study Identifying Political Strategies Used by Principals of Dual Language Programs

Science.gov (United States)

Girard, Guadalupe

2017-01-01

Purpose. The purpose of this quantitative study was to identify the external and internal political strategies used by principals that allow them to successfully navigate the political environment surrounding dual language programs. Methodology. This quantitative study used descriptive research to collect, analyze, and report data that identified…

Roentgenological criteria od assessment of stages of hydronephrosis in children

International Nuclear Information System (INIS)

Pavlova, M.K.

1988-01-01

A new parenchymatous index was proposed in order to raise the resolving power of excretory urography, and 3 stages of hydronephrosis were defined on the basis of quantitative indices. X-ray criteria were defined to prevent surgery in a group of children with the initial stage of disease. A group of patients with the terminal stage of hydronephrosis was subdivided into 2 groups: 1) sparing operation, 2) nephrectomy

Objectivity applied to embodied subjects in health care and social security medicine: definition of a comprehensive concept of cognitive objectivity and criteria for its application.

Science.gov (United States)

Solli, Hans Magnus; Barbosa da Silva, António

2018-03-02

The article defines a comprehensive concept of cognitive objectivity (CCCO) applied to embodied subjects in health care. The aims of this study were: (1) to specify some necessary conditions for the definition of a CCCO that will allow objective descriptions and assessments in health care, (2) to formulate criteria for application of such a CCCO, and (3) to investigate the usefulness of the criteria in work disability assessments in medical certificates from health care provided for social security purposes. The study design was based on a philosophical conceptual analysis of objectivity and subjectivity, the phenomenological notions 'embodied subject', 'life-world', 'phenomenological object' and 'empathy', and an interpretation of certificates as texts. The study material consisted of 18 disability assessments from a total collection of 86 medical certificates provided for social security purposes, written in a Norwegian hospital-based mental health clinic. Four necessary conditions identified for defining a CCCO were: (A) acknowledging the patient's social context and life-world, (B) perceiving patients as cognitive objects providing a variety of meaningful data (clinical, psychometric, and behavioural data - i.e. activities and actions, meaningful expressions and self-reflection), (C) interpreting data in context, and (D) using general epistemological principles. The criteria corresponding to these conditions were: (a) describing the patient's social context and recognizing the patient's perspective, (b) taking into consideration a variety of quantitative and qualitative data drawn from the clinician's perceptions of the patient as embodied subject, (c) being aware of the need to interpret the data in context, and (d) applying epistemological principles (professional expertise, dialogical intersubjectivity, impartiality, accuracy and correctness). Genuine communication is presupposed. These criteria were tested in the work disability assessments of medical

Resources on Quantitative/Statistical Research for Applied Linguists

Science.gov (United States)

Brown, James Dean

2004-01-01

The purpose of this review article is to survey and evaluate existing books on quantitative/statistical research in applied linguistics. The article begins by explaining the types of texts that will not be reviewed, then it briefly describes nine books that address how to do quantitative/statistical applied linguistics research. The review then…

Clinical and laboratory criteria for type 2 diabetes mellitus in children

OpenAIRE

T.V. Sorokman; O.V. Makarova; V.G. Ostapchuk

2018-01-01

The purpose of this review was the analysis of literature data on clinical and laboratory criteria for type 2 diabetes mellitus in children. A review of scientific literature was conducted using Pubmed as the search engine by the keywords: diabetes mellitus, type 2 diabetes mellitus, clinical picture, laboratory criteria, risk factors, taking into consideration studies conducted in the last 10 years, citation review of relevant primary and review articles, conference abstracts, personal files...

An analysis of project selection and assignment criteria of Danish tenders in Europe

Directory of Open Access Journals (Sweden)

Jasper Kranker Larsen

2013-12-01

Full Text Available Public construction agencies are one of the largest developers within the Danish construction industry, where such agencies own and develop new public construction projects. Most of these projects are put out in European tender. This study analyses the selection and assignment criteria employed by these agencies in different types of public sector projects. Some of the objectives pursued by the study include the determination of 1/ the selection and assignment criteria mostly used in Danish public tenders 2/ how different types of projects use selection and assignment criteria in the bidding process, and 3/ any significant difference between the use of selection and assignment criteria in Danish public construction projects. The study uses a quantitative research approach where 157 Danish public tender cases were selected from the European Tenders Electronic Daily database between the period: January 2010 to March 2013. Fisher's Exact Test was conducted to determine if there was any significant use of some selection and assignment criteria. The findings of the study showed that invited tenders with pre-qualification and lowest price in 69.8% of the tenders are the most used selection and assignment criteria, with little regard to project type.

Proposals for new standardized general diagnostic criteria for the secondary headaches

DEFF Research Database (Denmark)

Olesen, J; Steiner, T; Bousser, M-G

2009-01-01

headache and chronic migraine. These changes made apparent a further need for broader revisions to the standard formulation of diagnostic criteria for the secondary headaches. Currently, the fourth criterion makes impossible the definitive diagnosis of a secondary headache until the underlying cause has...... propose maintaining a standard approach to the secondary headaches using a set of four criteria A, B, C and D, but we construct these so that the requirement for resolution or successful treatment is removed. The proposal for general diagnostic criteria for the secondary headaches will be entered...... classification are then foreseen for the next 10 years. Until the printing of ICHD-IIR, the printed ICHD-II criteria remain in place for all other purposes. We issue a plea to the headache community to use and study these proposed general criteria for the secondary headaches in order to provide more evidence...

Criteria for cesium capsules to be shipped as special form radioactive material

International Nuclear Information System (INIS)

Lundeen, J.E.

1994-01-01

The purpose of this report is to compile all the documentation which defines the criteria for Waste Encapsulation and Storage Facility (WESF) cesium capsules at the IOTECH facility and Applied Radiant Energy Corporation (ARECO) to be shipped as special form radioactive material in the Beneficial Uses Shipping System (BUSS) Cask. The capsules were originally approved as special form in 1975, but in 1988 the integrity of the capsules came into question. WHC developed the Pre-shipment Acceptance Test Criteria for capsules to meet in order to be shipped as special form material. The Department of Energy approved the criteria and directed WHC to ship the capsules at IOTECH and ARECO meeting this criteria to WHC as special form material

Selection of Forklift Unit for Warehouse Operation by Applying Multi-Criteria Analysis

Directory of Open Access Journals (Sweden)

Predrag Atanasković

2013-07-01

Full Text Available This paper presents research related to the choice of the criteria that can be used to perform an optimal selection of the forklift unit for warehouse operation. The analysis has been done with the aim of exploring the requirements and defining relevant criteria that are important when investment decision is made for forklift procurement, and based on the conducted research by applying multi-criteria analysis, to determine the appropriate parameters and their relative weights that form the input data and database for selection of the optimal handling unit. This paper presents an example of choosing the optimal forklift based on the selected criteria for the purpose of making the relevant investment decision.

Sleep apnea diagnosis varies with the hypopnea criteria applied

DEFF Research Database (Denmark)

Ponsaing, Laura B; Iversen, Helle K; Jennum, Poul

2016-01-01

PURPOSE: We aimed to evaluate the three hypopnea criteria, A and B from 2007 and the revised from 2012, proposed by the American Academy of Sleep Medicine (AASM) for scoring sleep-related breathing disorders (SRBDs) in patients with acute stroke or transient ischemic attack (TIA). METHODS...

Developing Multi-Dimensional Evaluation Criteria for English Learning Websites with University Students and Professors

Science.gov (United States)

Liu, Gi-Zen; Liu, Zih-Hui; Hwang, Gwo-Jen

2011-01-01

Many English learning websites have been developed worldwide, but little research has been conducted concerning the development of comprehensive evaluation criteria. The main purpose of this study is thus to construct a multi-dimensional set of criteria to help learners and teachers evaluate the quality of English learning websites. These…

A comparison of international criteria for the ultimate storage of radioactive wastes

International Nuclear Information System (INIS)

Mielke, H.

1985-01-01

In countries other than the Federal Republic of Germany and internationally there are no comprehensive codes referring to criteria and safety requirements except those of the IAEA and USA. In other countries there exist safety goals for the ultimate storage or for purely geological criteria. The degree of detailing regulations differs widely abroad and internationally. Safety goals abroad and internationally as well as measures for their realisation in the ultimate storage of radioactive wastes in deep geological formations are in line with the German safety goals. The IAEA refers to general aspects of geological, waste technology and ultimate storage technology criteria. In the USA, ultimate storage technology criteria have been quantified in part. The quantitative geological criteria existing in Great Britain and in the Netherlands are only relevant in as much as safety analyses must be performed for a specific site to provide evidence for the safety of this site. The comparison shows that most requirements pronounced abroad are also made for the Federal Republic of Germany. Some requirements are more specified in the Federal Republic of Germany, some are more detailed abroad. (orig./HP) [de

Qualitative versus quantitative methods in psychiatric research.

Science.gov (United States)

Razafsha, Mahdi; Behforuzi, Hura; Azari, Hassan; Zhang, Zhiqun; Wang, Kevin K; Kobeissy, Firas H; Gold, Mark S

2012-01-01

Qualitative studies are gaining their credibility after a period of being misinterpreted as "not being quantitative." Qualitative method is a broad umbrella term for research methodologies that describe and explain individuals' experiences, behaviors, interactions, and social contexts. In-depth interview, focus groups, and participant observation are among the qualitative methods of inquiry commonly used in psychiatry. Researchers measure the frequency of occurring events using quantitative methods; however, qualitative methods provide a broader understanding and a more thorough reasoning behind the event. Hence, it is considered to be of special importance in psychiatry. Besides hypothesis generation in earlier phases of the research, qualitative methods can be employed in questionnaire design, diagnostic criteria establishment, feasibility studies, as well as studies of attitude and beliefs. Animal models are another area that qualitative methods can be employed, especially when naturalistic observation of animal behavior is important. However, since qualitative results can be researcher's own view, they need to be statistically confirmed, quantitative methods. The tendency to combine both qualitative and quantitative methods as complementary methods has emerged over recent years. By applying both methods of research, scientists can take advantage of interpretative characteristics of qualitative methods as well as experimental dimensions of quantitative methods.

Patient specific quality assurance of IMRT: quantitative approach using film dosimetry and optimization

International Nuclear Information System (INIS)

Shin, Kyung Hwan; Park, Sung Yong; Park, Dong Hyun

2005-01-01

Film dosimetry an a part of patient specific intensity modulated radiation therapy quality assurance (IMRT QA) was performed to develop a new optimization method of film isocenter offset and to then suggest new quantitative criteria for film dosimetry. Film dosimetry was performed on 14 IMRT patients with head and neck cancers. An optimization method for obtaining the local minimum was developed to adjust for the error in the film isocenter offset, which is the largest part of the systemic errors. The adjust value of the film isocenter offset under optimization was 1 mm in 12 patients, while only two patients showed 2 mm translation. The means of absolute average dose difference before and after optimization were 2.36 and 1.56%, respectively, and the mean radios over a 5% tolerance were 9.67 and 2.88%. After optimization, the differences in the dose decreased dramatically. A low dose range cutoff (L-Cutoff) had been suggested for clinical application. New quantitative criteria of a ratio of over a 5%, but less than 10% tolerance, and for an absolute average dose difference less than 3% have been suggested for the verification of film dosimetry. The new optimization method was effective in adjusting for the film dosimetry error, and the newly quantitative criteria suggested in this research are believed to be sufficiently accurate and clinically useful

A thermodynamic approach to the quantitative evaluation of the metallic melts glass-forming ability

International Nuclear Information System (INIS)

Zajtsev, A.I.

2004-01-01

The outlook for development of quantitative criteria of the tendency of metallic melt to render amorphous is shown with taking into account specific features of chemical interaction between components. With the use of statistical physics methods and thermodynamics as well as concepts of association the techniques are devised for quantitative separation of contributions to liquid alloy thermodynamic functions conditioned by various types of chemical interaction between components. The results Knudsen mass-spectroscopic comprehensive thermodynamic study of a wide range of systems with various tendency to vitrification are summarized. It is shown that excessive (configurational) entropy and specific heat of the liquid are key features predetermining thermodynamic and kinetic stimuli of amorphization. Their values are completely determined by a covalent constituent of chemical interaction on entropic term of association reaction. The possibility of construction of quantitative amorphization criteria on the basis of this feature and the outlook for the use of the approach proposed to predict physicochemical and mechanical properties of solid amorphous materials are illustrated [ru

Research into care quality criteria for long-term care institutions.

Science.gov (United States)

Wang, Wen-Liang; Chang, Hong-Jer; Liu, An-Chi; Chen, Yu-Wen

2007-12-01

The purpose of this paper was to determine the criteria that reflect the quality of care provided by long-term care institutions. Research was conducted using a two-step procedure that first utilized the SERVQUAL model with Fuzzy Delphi Method to establish the proper criteria by which service quality could be measured. A total of 200 questionnaires were mailed to expert respondents, of which 89 were returned and 77 deemed valid for use in this study. We then applied the Multi-Criteria Decision Making Process to determine the degree of importance of each criterion to long-term care institution service quality planning work. Secondly, 200 questionnaires were distributed and 74 valid responses were returned. Based on the 5 SERVQUAL model constructs, this study found 17 of the 28 criteria, to be pertinent to nursing care quality, with those in the Responsiveness and Empathy domains being the ones most critical.

Examination of Students' Selection Criteria for International Education

Science.gov (United States)

Ahmad, Syed Zamberi; Buchanan, F. Robert; Ahmad, Norita

2016-01-01

Purpose: Motivations for study abroad in tourism and hospitality were examined as to the influence of a variety of personal criteria in the individual decision process of adult learners to select a host country and host institution of study. The paper aims to discuss this issue. Design/methodology/approach: Push-pull factors (Mazzarol and Soutar,…

A multi-criteria decision-making approach to rank supplier selection criteria for hospital waste management: A case from Pakistan.

Science.gov (United States)

Ishtiaq, Palvisha; Khan, Sharfuddin Ahmed; Haq, Moiz-Ul

2018-04-01

To address environmental issues and cost effectiveness, waste management is necessary for healthcare facilities. Most importantly, segregation of hazardous and non-hazardous waste must be done as in many developing countries; disposal of both types of healthcare waste is done together, which is an unsafe practice. Waste generated in hospitals needs proper management to minimise hazards for patient and healthcare workers. At the same time, it is quite difficult for hospitals to find a systematic way to select appropriate suppliers for hospital waste management. Therefore, the purpose of this article is to identify, validate, and rank criteria that are essential for hospital waste management suppliers' selection. The analytical hierarchal process approach has been used and a survey from Pakistan's largest city (Karachi) has been considered to rank the most appropriate criteria that is necessary to select the supplier, especially in a developing country like Pakistan. Results show that waste management cost (45.5%) and suppliers' details (31.5%) are the top two main criteria for supplier selection; and storage cost (15.7%), waste handling cost (14.7%), and qualification of the suppliers (10.9%) are the top three most important overall sub-criteria for supplier selection for hospital waste management.

The impact of multi-criteria performance measurement on business performance improvement

OpenAIRE

Kasie, Fentahun Moges; Belay, Alemu Moges

2013-01-01

Purpose: The purpose of this paper is to investigate the relationship between multi-criteria performance measurement (MCPM) practice and business performance improvement using the raw data collected from 33 selected manufacturing companies. In addition, it proposes modified MCPM model as an effective approach to improve business performance of manufacturing companies. Design/methodology/approach:Research paper. Primary and secondary data were collected using questionnaire survey, interview an...

Method for Determining Appropriate Clustering Criteria of Location-Sensing Data

Directory of Open Access Journals (Sweden)

Youngmin Lee

2016-08-01

Full Text Available Large quantities of location-sensing data are generated from location-based social network services. These data are provided as point properties with location coordinates acquired from a global positioning system or Wi-Fi signal. To show the point data on multi-scale map services, the data should be represented by clusters following a grid-based clustering method, in which an appropriate grid size should be determined. Currently, there are no criteria for determining the proper grid size, and the modifiable areal unit problem has been formulated for the purpose of addressing this issue. The method proposed in this paper is applies a hexagonal grid to geotagged Twitter point data, considering the grid size in terms of both quantity and quality to minimize the limitations associated with the modifiable areal unit problem. Quantitatively, we reduced the original Twitter point data by an appropriate amount using Töpfer’s radical law. Qualitatively, we maintained the original distribution characteristics using Moran’s I. Finally, we determined the appropriate sizes of clusters from zoom levels 9–13 by analyzing the distribution of data on the graphs. Based on the visualized clustering results, we confirm that the original distribution pattern is effectively maintained using the proposed method.

Quantitative Preparation in Doctoral Education Programs: A Mixed-Methods Study of Doctoral Student Perspectives on their Quantitative Training

Directory of Open Access Journals (Sweden)

Sarah L Ferguson

2017-07-01

Full Text Available Aim/Purpose: The purpose of the current study is to explore student perceptions of their own doctoral-level education and quantitative proficiency. Background: The challenges of preparing doctoral students in education have been discussed in the literature, but largely from the perspective of university faculty and program administrators. The current study directly explores the student voice on this issue. Methodology: Utilizing a sequential explanatory mixed-methods research design, the present study seeks to better understand doctoral-level education students’ perceptions of their quantitative methods training at a large public university in the southwestern United States. Findings: Results from both phases present the need for more application and consistency in doctoral-level quantitative courses. Additionally, there was a consistent theme of internal motivation in the responses, suggesting students perceive their quantitative training to be valuable beyond their personal interest in the topic. Recommendations for Practitioners: Quantitative methods instructors should emphasize practice in their quantitative courses and consider providing additional support for students through the inclusion of lab sections, tutoring, and/or differentiation. Pre-testing statistical ability at the start of a course is also suggested to better meet student needs. Impact on Society: The ultimate goal of quantitative methods in doctoral education is to produce high-quality educational researchers who are prepared to apply their knowledge to problems and research in education. Results of the present study can inform faculty and administrator decisions in doctoral education to best support this goal. Future Research: Using the student perspectives presented in the present study, future researchers should continue to explore effective instructional strategies and curriculum design within education doctoral programs. The inclusion of student voice can strengthen

Effect of combined loading on pipe flaw evaluation criteria

International Nuclear Information System (INIS)

Miura, Naoki; Chung Yeonki

1999-01-01

Considering a rational maintenance rule of Light Water Reactor piping, reliable flaw evaluation criteria are essential to determine how a detected flaw is detrimental to continuous plant operation. Ductile fracture is one of the dominant failure modes to be considered for carbon steel piping, and can be analyzed by the elastic-plastic fracture mechanics. Currently the analytical results are provided as flaw evaluation criteria using load correction factors such like the Z-factor in ASME Code Section 6. The present correction factors were conventionally determined taken a conservatism and a simplicity into account, however, the effect of internal pressure which would be an important factor under an actual plant condition was not adequately considered. Recently, a J-estimation scheme, 'LBB.ENGC' for ductile fracture analysis of circumferentially through-wall-cracked pipes subjected to combined loading was newly developed to have a better prediction with more realistic manner. This method is explicitly incorporated the contribution of both bending and tension due to internal pressure by means of the scheme compatible with an arbitrary combined loading history. In this paper, the effect of internal pressure on the flaw evaluation criteria was investigated using the new J-estimation scheme. A correction factor based on the new J-estimation scheme was compared with the present correction factors, and the predictability of the current flaw evaluation criteria was quantitatively evaluated in consideration of internal pressure. (author)

Ecotoxicological criteria for final storage quality: Possibilities and limits

Science.gov (United States)

Zeyer, Josef; Meyer, Joseph

Landfills are complex chemical and biological reactors whose internal processes are often beyond the immediate control of process engineers. Therefore, the concept of a "Final Storage Landfill" may be deceptive. Furthermore, traditional approaches to establishing discharge criteria and treatment requirements for industrial effluents may not work well for landfill emissions. Factories can often be treated as steady-state processes whose inputs and outputs are predictable; however, landfills are batch reactors whose contents and emissions may be unknown and will vary temporally and spatially. If the contents of a landfill are known, the sequence of chemical reactions can be predicted qualitatively. Even if that sequence is predictable, though, quantitative ecotoxicological criteria will be difficult to establish, and risk assessments based on chemical "laundry lists" will be questionable. The situation is not hopeless, though. New approaches can be developed to monitor and predict landfill emissions. We believe these will include (1) testing (biological and chemical) of internal components of landfills as well as emissions; (2) development of laboratory and/or field methods in which the chemical and biological evolution of landfills can be studied at accelerated rates, thus allowing better prediction of future emissions; and (3) flexible ecotoxicological criteria that are adaptable to the evolving nature of landfill emissions. These criteria should be based on complementary chemical analyses and biological tests that fit into a hierarchical (decision-tree) hazard assessment strategy.

Quality criteria and indicators for research in Theology: What to do with quantitative measures?

Energy Technology Data Exchange (ETDEWEB)

Martens, S.; Schatz, W.

2016-07-01

In the work in progress report we would like to present preliminary results of our research project “Resource-based instrument for describing and evaluating research in the humanities and the social sciences as exemplified by theology”. Using a bottom-up approach that strongly involves the researchers we have worked to define criteria that are fit to adequately describe research (mapping of research activities, description of characteristics of the discipline) and evaluate research quality in theology. (Author)

12 CFR 228.25 - Community development test for wholesale or limited purpose banks.

Science.gov (United States)

2010-01-01

... Performance § 228.25 Community development test for wholesale or limited purpose banks. (a) Scope of test. The... performance of a wholesale or limited purpose bank pursuant to the following criteria: (1) The number and... performance rating. The Board rates a bank's community development performance as provided in appendix A of...

Methodological quality of quantitative lesbian, gay, bisexual, and transgender nursing research from 2000 to 2010.

Science.gov (United States)

Johnson, Michael; Smyer, Tish; Yucha, Carolyn

2012-01-01

The purpose of this study was to evaluate the methodological quality of quantitative lesbian, gay, bisexual, and transgender nursing research from 2000 to 2010. Using a key word search in Cumulative Index to Nursing and Allied Health Literature, 188 studies were identified and 40 met the criteria, which included descriptive, experimental, quasi-experimental, or observational (case control, cohort, and cross-sectional) design. The methodological quality of these studies was similar to that reported for medical and nursing educational research. The foci of these lesbian, gay, bisexual, and transgender studies were biased toward human immunodeficiency virus, acquired immunodeficiency syndrome, and sexually transmitted diseases, and 58.5% of the funded research was related to human immunodeficiency virus or acquired immunodeficiency syndrome. To provide evidence-based health care to these populations, an understanding of the current state of research is crucial.

Criteria for endocrine disrupters: report from the Danish centre on Endocrine Disrupters (CEHOS)

DEFF Research Database (Denmark)

Holbech, Henrik; Bjerregaard, Poul; Hass, Ulla

health and the environment. A number of issues relevant for the development of criteria for EDs were considered such as definition, potency, lead effects, specificity and relevance for humans and the environment. The proposed criteria divide substances into three categories dependent on the available...... and the main purpose of the Centre is to build and gather new knowledge on endocrine disrupters (EDs) with focus on information needed for the preventive work of the regulatory authorities. The aim of the report was to propose scientific criteria for the identification of ED substances of concern for human...

Soil physical criteria for evaluating irrigation suitability of Okija ...

African Journals Online (AJOL)

Suitability of upland soils of Anigbo Okija for irrigation was assessed using soil physical criteria of texture, depth, pore type, slope percent colour and soil structure for the purpose of estimating season farming and rainy season drought. Soils were classified using Soil Taxonomy and FAO/UNESCO legend. Mapping was ...

Quantitative Approaches to Group Research: Suggestions for Best Practices

Science.gov (United States)

McCarthy, Christopher J.; Whittaker, Tiffany A.; Boyle, Lauren H.; Eyal, Maytal

2017-01-01

Rigorous scholarship is essential to the continued growth of group work, yet the unique nature of this counseling specialty poses challenges for quantitative researchers. The purpose of this proposal is to overview unique challenges to quantitative research with groups in the counseling field, including difficulty in obtaining large sample sizes…

Elastography as a hybrid imaging technique : coupling with photoacoustics and quantitative imaging

International Nuclear Information System (INIS)

Widlak, T.G.

2015-01-01

While classical imaging methods, such as ultrasound, computed tomography or magnetic resonance imaging, are well-known and mathematically understood, a host of physiological parameters relevant for diagnostic purposes cannot be obtained by them. This gap is recently being closed by the introduction of hybrid, or coupled-physics imaging methods. They connect more then one physical modality, and aim to provide quantitative information on optical, electrical or mechanical parameters with high resolution. Central to this thesis is the mechanical contrast of elastic tissue, especially Young’s modulus or the shear modulus. Different methods of qualitative elastography provide interior information of the mechanical displacement field. From this interior data the nonlinear inverse problem of quantitative elastography aims to reconstruct the shear modulus. In this thesis, the elastography problem is seen from a hybrid imaging perspective; methods from coupled-physics inspired literature and regularization theory have been employed to recover displacement and shear modulus information. The overdetermined systems approach by G. Bal is applied to the quantitative problem, and ellipticity criteria are deduced, for one and several measurements, as well as injectivity results. Together with the geometric theory of G. Chavent, the results are used for analyzing convergence of Tikhonov regularization. Also, a convergence analysis for the Levenberg Marquardt method is provided. As a second mainstream project in this thesis, elastography imaging is developed for extracting displacements from photoacoustic images. A novel method is provided for texturizing the images, and the optical flow problem for motion estimation is shown to be regularized with this texture generation. The results are tested in cooperation with the Medical University Vienna, and the methods for quantitative determination of the shear modulus evaluated in first experiments. In summary, the overdetermined systems

STOPP/START criteria for potentially inappropriate prescribing in older people: version 2.

Science.gov (United States)

O'Mahony, Denis; O'Sullivan, David; Byrne, Stephen; O'Connor, Marie Noelle; Ryan, Cristin; Gallagher, Paul

2015-03-01

Screening tool of older people's prescriptions (STOPP) and screening tool to alert to right treatment (START) criteria were first published in 2008. Due to an expanding therapeutics evidence base, updating of the criteria was required. We reviewed the 2008 STOPP/START criteria to add new evidence-based criteria and remove any obsolete criteria. A thorough literature review was performed to reassess the evidence base of the 2008 criteria and the proposed new criteria. Nineteen experts from 13 European countries reviewed a new draft of STOPP & START criteria including proposed new criteria. These experts were also asked to propose additional criteria they considered important to include in the revised STOPP & START criteria and to highlight any criteria from the 2008 list they considered less important or lacking an evidence base. The revised list of criteria was then validated using the Delphi consensus methodology. The expert panel agreed a final list of 114 criteria after two Delphi validation rounds, i.e. 80 STOPP criteria and 34 START criteria. This represents an overall 31% increase in STOPP/START criteria compared with version 1. Several new STOPP categories were created in version 2, namely antiplatelet/anticoagulant drugs, drugs affecting, or affected by, renal function and drugs that increase anticholinergic burden; new START categories include urogenital system drugs, analgesics and vaccines. STOPP/START version 2 criteria have been expanded and updated for the purpose of minimizing inappropriate prescribing in older people. These criteria are based on an up-to-date literature review and consensus validation among a European panel of experts. © The Author 2014. Published by Oxford University Press on behalf of the British Geriatrics Society.

The Derivation of Evaluation Criteria of Nuclear Fuel Cycle

International Nuclear Information System (INIS)

Kim, S. K.; Ko, W. I.

2013-01-01

This study suggests the evaluation criteria and evaluation indicators derived using a factor analysis. As a result of a factor analysis, 5 evaluation criteria (safety (technological feature), environmental impact, economic feasibility, sociality, institution) and 24 evaluation indicators were selected. Particularly, the level of legislation for the management of radioactive waste, the level of establishment of safety standards of the country, and the level of application of international safety standards were analyzed to be qualitative evaluation indicators that should be considered in the aspect of the institution. The purpose of an analysis on diverse nuclear fuel cycles is to select the optimum nuclear fuel cycle suitable for the environment of one's own country. Accordingly, diverse evaluation criteria and evaluation indicators are necessary. In addition, individual evaluation criteria can be explained with various evaluation indicators. For example, the evaluation criteria for economic feasibility can be explained with evaluation indicators such as the unit cost or total cost. However, if too many evaluation indicators are included in one evaluation criterion, the evaluation is not easy, and if too few evaluation indicators are established, the evaluation criteria cannot be explained sufficiently, and thus the evaluation can be distorted. Accordingly, not only should the evaluation indicators be composed of an appropriate number of units, but they should also not be overlapped, and ambiguous evaluation indicators should be dropped out and necessary evaluation indicators must be included

Resources on quantitative/statistical research for applied linguists

OpenAIRE

Brown , James Dean

2004-01-01

Abstract The purpose of this review article is to survey and evaluate existing books on quantitative/statistical research in applied linguistics. The article begins by explaining the types of texts that will not be reviewed, then it briefly describes nine books that address how to do quantitative/statistical applied linguistics research. The review then compares (in prose and tables) the general characteris...

Power Distribution System Planning Evaluation by a Fuzzy Multi-Criteria Group Decision Support System

Directory of Open Access Journals (Sweden)

Tiefeng Zhang

2010-10-01

Full Text Available The evaluation of solutions is an important phase in power distribution system planning (PDSP which allows issues such as quality of supply, cost, social service and environmental implications to be considered and usually involves the judgments of a group of experts. The planning problem is thus suitable for the multi-criteria group decision-making (MCGDM method. The evaluation process and evaluation criteria often involve uncertainties incorporated in quantitative analysis with crisp values and qualitative judgments with linguistic terms; therefore, fuzzy sets techniques are applied in this study. This paper proposes a fuzzy multi-criteria group decision-making (FMCGDM method for PDSP evaluation and applies a fuzzy multi-criteria group decision support system (FMCGDSS to support the evaluation task. We introduce a PDSP evaluation model, which has evaluation criteria within three levels, based on the characteristics of a power distribution system. A case-based example is performed on a test distribution network and demonstrates how all the problems in a PDSP evaluation are addressed using FMCGDSS. The results are acceptable to expert evaluators.

The Ideal Criteria of Supplier Selection for SMEs Food Processing Industry

OpenAIRE

Ramlan Rohaizan; Engku Abu Bakar Engku Muhammad Nazri; Mahmud Fatimah; Ng Hooi Keng

2016-01-01

Selection of good supplier is important to determine the performance and profitability of SMEs food processing industry. The lack of managerial capability on supplier selection in SMEs food processing industry affects the competitiveness of SMEs food processing industry. This research aims to determine the ideal criteria of supplier for food processing industry using Analytical Hierarchy Process (AHP). The research was carried out in a quantitative method by distributing questionnaires to 50 ...

Review of issues relevant to acceptable risk criteria for nuclear waste management

International Nuclear Information System (INIS)

Cohen, J.J.

1978-01-01

Development of acceptable risk criteria for nuclear waste management requires the translation of publicly determined goals and objectives into definitive issues which, in turn, require resolution. Since these issues are largely of a subjective nature, they cannot be resolved by technological methods. Development of acceptable risk criteria might best be accomplished by application of a systematic methodology for the optimal implementation of subjective values. Multi-attribute decision analysis is well suited for this purpose

Fuzzy portfolio optimization advances in hybrid multi-criteria methodologies

CERN Document Server

Gupta, Pankaj; Inuiguchi, Masahiro; Chandra, Suresh

2014-01-01

This monograph presents a comprehensive study of portfolio optimization, an important area of quantitative finance. Considering that the information available in financial markets is incomplete and that the markets are affected by vagueness and ambiguity, the monograph deals with fuzzy portfolio optimization models. At first, the book makes the reader familiar with basic concepts, including the classical mean–variance portfolio analysis. Then, it introduces advanced optimization techniques and applies them for the development of various multi-criteria portfolio optimization models in an uncertain environment. The models are developed considering both the financial and non-financial criteria of investment decision making, and the inputs from the investment experts. The utility of these models in practice is then demonstrated using numerical illustrations based on real-world data, which were collected from one of the premier stock exchanges in India. The book addresses both academics and professionals pursuin...

Safety analysis, risk assessment, and risk acceptance criteria

International Nuclear Information System (INIS)

Jamali, K.

1997-01-01

This paper discusses a number of topics that relate safety analysis as documented in the Department of Energy (DOE) safety analysis reports (SARs), probabilistic risk assessments (PRA) as characterized primarily in the context of the techniques that have assumed some level of formality in commercial nuclear power plant applications, and risk acceptance criteria as an outgrowth of PRA applications. DOE SARs of interest are those that are prepared for DOE facilities under DOE Order 5480.23 and the implementing guidance in DOE STD-3009-94. It must be noted that the primary area of application for DOE STD-3009 is existing DOE facilities and that certain modifications of the STD-3009 approach are necessary in SARs for new facilities. Moreover, it is the hazard analysis (HA) and accident analysis (AA) portions of these SARs that are relevant to the present discussions. Although PRAs can be qualitative in nature, PRA as used in this paper refers more generally to all quantitative risk assessments and their underlying methods. HA as used in this paper refers more generally to all qualitative risk assessments and their underlying methods that have been in use in hazardous facilities other than nuclear power plants. This discussion includes both quantitative and qualitative risk assessment methods. PRA has been used, improved, developed, and refined since the Reactor Safety Study (WASH-1400) was published in 1975 by the Nuclear Regulatory Commission (NRC). Much debate has ensued since WASH-1400 on exactly what the role of PRA should be in plant design, reactor licensing, 'ensuring' plant and process safety, and a large number of other decisions that must be made for potentially hazardous activities. Of particular interest in this area is whether the risks quantified using PRA should be compared with numerical risk acceptance criteria (RACs) to determine whether a facility is 'safe.' Use of RACs requires quantitative estimates of consequence frequency and magnitude

Ventilator-Associated Pneumonia in Trauma Patients: Different Criteria, Different Rates.

Science.gov (United States)

Leonard, Kenji L; Borst, Gregory M; Davies, Stephen W; Coogan, Michael; Waibel, Brett H; Poulin, Nathaniel R; Bard, Michael R; Goettler, Claudia E; Rinehart, Shane M; Toschlog, Eric A

2016-06-01

No consensus exists regarding the definition of ventilator-associated pneumonia (VAP). Even within a single institution, inconsistent diagnostic criteria result in conflicting rates of VAP. As a Level 1 trauma center participating in the Trauma Quality Improvement Project (TQIP) and the National Healthcare Safety Network (NHSN), our institution showed inconsistencies in VAP rates depending on which criteria was applied. The purpose of this study was to compare VAP definitions, defined by culture-based criteria, National Trauma Data Bank (NTDB) and NHSN, using incidence in trauma patients. A retrospective chart review of consecutive trauma patients who were diagnosed with VAP and met pre-determined inclusion and exclusion criteria admitted to our rural, 861-bed, Level 1 trauma and tertiary care center between January 2008 and December 2011 was performed. These patients were identified from the National Trauma Registry of the American College of Surgeons (NTRACS) database and an in-house infection control database. Ventilator-associated pneumonia diagnosis criteria defined by the U.S. Center for Disease Control and Prevention (used by the NHSN), the NTDB, and our institutional, culture-based criteria gold standard were compared among patients. Two hundred seventy-nine patients were diagnosed with VAP (25.4% met NHSN criteria, 88.2% met NTDB, and 76.3% met culture-based criteria). Only 58 (20.1%) patients met all three criteria. When NHSN criteria were compared with culture-based criteria, NHSN showed a high specificity (92.5%) and low sensitivity (28.2%). The positive predictive value (PPV) was 84.5%, but the negative predictive value (NPV) was 47.1%. The agreement between the NHSN and the culture-based criteria was poor (κ = 0.18). Conversely, the NTDB showed a lower specificity (57.8%), but greater sensitivity (86.4%) compared with culture-based criteria. The PPV and NPV were both 74% and the two criteria showed fair agreement (κ = 0.41). The lack of

Data Acceptance Criteria for Standardized Human-Associated Fecal Source Identification Quantitative Real-Time PCR Methods

Science.gov (United States)

There is a growing interest in the application of human-associated fecal sourceidentification quantitative real-time PCR (qPCR) technologies for water quality management. The transition from a research tool to a standardized protocol requires a high degree of confidence in data q...

Determination of effective criteria on development of RTA Furniture Industry in Iran

Directory of Open Access Journals (Sweden)

hosein omidi

2016-06-01

Full Text Available Ready to assemble furniture industry in Iran has not been considered by practitioners and investors as it is known in the other countries. While, it is possible to achive the many competitive advantage, if this industry develop in Iran. With regard to this issue, the goal of this study is to introduce the potential market for ready to assemble furniture and determination and prioritize of the effective criteria on development of Iran ready to assemble furniture industry. For this purpose, after preliminary investigation and interview with some of the furniture producers and relevant experts, the identified criteria were divided into five major groups as Economic, Management, Marketing & Sales, Technical-Technological and Infrastructure and as well as 42 sub-criteria. The hierarchy of these criteria was designed and then the weighting values of criteria and sub-criteria were determined using Analytical Hierarchy Process (AHP by expert choice software. The results indicated that the management and marketing & sales criteria have the highest weighting values at the first level. In addition, among the effective sub-criteria, the criteria as marketing innovation, design innovation, operations management, logistics management, raw materials innovation and product promotion, have the highest priorities for development of ready to assemble furniture industry in Iran.

Determination of Effective Criteria for Location Selection of Kiln Wood Drying Plants by AHP Technique

Directory of Open Access Journals (Sweden)

Rahim Mohebbi

2011-12-01

Full Text Available This study was aimed at determining the effective criteria for location selection of wood drying plants in Iran. For this purpose, after review and field visit of the industries, 35 key indicators were identified. These criteria were divided into five major groups as: materials, infrastructure, technical, economical and instructional indices. The priority rates of these criteria and sub-criteria were evaluated by AHP technique. The results indicated that among 35 effective sub-criteria in location selection of the plants, the sub-criteria of quality of raw materials(0.152, purchasing raw materials, land cost, profitability, reliability of supply, and sales had the highest priorities, which were rated as 0.118, 0.105, 0.067, 0.061 and 0.057, respectively

On-farm welfare assessment for regulatory purposes: Issues and possible solutions

DEFF Research Database (Denmark)

Sørensen, Jan Tind; Fraser, David

2010-01-01

On-farm welfare assessment has been used mainly for non-regulatory purposes such as producer education or to qualify for voluntary welfare-assurance programs. The application of on-farm assessments in regulatory programs would require four issues to be addressed: (1) selecting criteria...... solution. Issues 3 and 4 (fairness and efficiency) require scientific data on the precision, repeatability, independence, and cost-of-scoring for the various candidate criteria. A process is also needed to bring the scientific information into the deliberative process, either as formal recommendations and...

An Investigation Into Design Criteria for Affordable Housing Supply

Directory of Open Access Journals (Sweden)

Olanrewaju Abdul Lateef

2017-01-01

Full Text Available Affordable housing provision constitutes a very large scheme in any countries due to income distribution and national development. The supply of housing depends on many activities and processes. The purpose of the houses is to meet the requirement of the householders therefore design criteria must address the users’ requirements. The establishment of the design criteria constitutes an important activity at the initial phase of the housing development. The design criteria are prepared by the design team in collaboration with many stakeholders especially the householders. Housinsg design criteria are the requirements that must be considered prior to construction of the housing. Lack of adequate information on the design criteria would lead to poor householders’ satisfactions, increase in maintenance cost, abandonments and completed but not occupy housing. In Malaysia, many of these consequences are prevalent. However, while information on the house owners’ requirements is inconclusive, this current research set out to investigate the design criteria of affordable housing. The increase in the affordable housing gap in Malaysia can be reduced if the designers have a comprehensive understanding of users’ requirements and the design criteria. Through a cross sectional survey questionnaire, comprising 25 criteria, 7 criteria were found to be extremely critical. The Kaiser-Meyer-Olkin measure of sampling adequacy indicated that the strength of the relationships among variables was strong (KMO =0.716. Bartlett’s test of sphericity, which tests the overall significance of all the correlations within the correlation matrix, was significant χ2 (325 = 1825.075, p<0.001, indicating the data were drawn from the same population and that the criteria were related.Sustainability considerations are now being considered by the providers of affordable housing. Deductively, the results lead to the conclusion that a major factor responsible for the poor

SPECT and 3D display quantitative evaluation in renal DMSA scintigraphy

Energy Technology Data Exchange (ETDEWEB)

Lyra, M; Skouroliakou, K; Emmanouilides, I; Stratis, I [Univerisity of Athens, Department of Radiology and Department of Mathematics, Athens (Greece)

1999-12-31

The evaluation of cortical damage to the kidneys, especially in children, is currently performed by means of Tc99m-DMSA renal scan. The routine involves the acquisition of planar images and their qualitative and quantitative evaluation. Many studies have dealt with the possible advantage that SPECT could possess on qualitative criteria. This study attempts to quantitatively deal with the issue by the calculation of an index. The results exhibit a clear advantage of tomographic and 3D reconstructed images over the conventional planar ones. (authors) 14 refs., 3 figs., 1 tabs.

Quantitative Theoretical and Conceptual Framework Use in Agricultural Education Research

Science.gov (United States)

Kitchel, Tracy; Ball, Anna L.

2014-01-01

The purpose of this philosophical paper was to articulate the disciplinary tenets for consideration when using theory in agricultural education quantitative research. The paper clarified terminology around the concept of theory in social sciences and introduced inaccuracies of theory use in agricultural education quantitative research. Finally,…

Packaging design criteria for the MCO cask

International Nuclear Information System (INIS)

Edwards, W.S.

1996-01-01

Approximately 2,100 metric tons of unprocessed, irradiated nuclear fuel elements are presently stored in the K Basins (including possibly 700 additional elements from PUREX, N Reactor, and 327 Laboratory). The basin water, particularly in the K East Basin, contains significant quantities of dissolved nuclear isotopes and radioactive fuel corrosion particles. To permit cleanup of the K Basins and fuel conditioning, the fuel will be transported from the 100 K Area to a Canister Storage Building (CSB) in the 200 East area. In order to initiate K Basin cleanup on schedule, the two-year fuel-shipping campaign must begin by December 1997. The purpose of this packaging design criteria is to provide criteria for the design, fabrication, and use of a packaging system to transport the large quantities of irradiated nuclear fuel elements positioned within Multiple Canister Overpacks

Packaging Design Criteria for the MCO Cask

International Nuclear Information System (INIS)

FLANAGAN, B.D.

2000-01-01

Approximately 2,100 metric tons of unprocessed, irradiated, nuclear fuel elements are presently stored in the K Basins (including approximately 700 additional elements from the Plutonium-Uranium Extraction Plant, N Reactor, and 327 Laboratory). To permit cleanup of the K Basins and fuel conditioning, the fuel will be transported from the 100 K Area to a Canister Storage Building (CSB) in the 200 East Area. The purpose of this packaging design criteria is to provide criteria for the design, fabrication, and use of a packaging system to transport the large quantities of irradiated nuclear fuel elements positioned within Multi-canister Overpacks. Concurrent with the K Basin cleanup, 72 Shippingport Pressurized Water Reactor Core 2 fuel assemblies will be transported from T Plant to the CSB to provide space at T Plant for K Basin sludge canisters

Multi-criteria framework as an innovative tradeoff approach to determine the shelf-life of high pressure-treated poultry.

Science.gov (United States)

Guillou, S; Lerasle, M; Simonin, H; Anthoine, V; Chéret, R; Federighi, M; Membré, J-M

2016-09-16

A multi-criteria framework combining safety, hygiene and sensorial quality was developed to investigate the possibility of extending the shelf-life and/or removing lactate by applying High Hydrostatic Pressure (HHP) in a ready-to-cook (RTC) poultry product. For this purpose, Salmonella and Listeria monocytogenes were considered as safety indicators and Escherichia coli as hygienic indicator. Predictive modeling was used to determine the influence of HHP and lactate concentration on microbial growth and survival of these indicators. To that end, probabilistic assessment exposure models developed in a previous study (Lerasle, M., Guillou, S., Simonin, H., Anthoine, V., Chéret, R., Federighi, M., Membré, J.M. 2014. Assessment of Salmonella and L. monocytogenes level in ready-to-cook poultry meat: Effect of various high pressure treatments and potassium lactate concentrations. International Journal of Food Microbiology 186, 74-83) were used for L. monocytogenes and Salmonella. Besides, for E. coli, an exposure assessment model was built by modeling data from challenge-test experiments. Finally, sensory tests and color measurements were performed to evaluate the effect of HHP on the organoleptic quality of an RTC product. Quantitative rules of decision based on safety, hygienic and organoleptic criteria were set. Hygienic and safety criteria were associated with probability to exceed maximum contamination levels of L. monocytogenes, Salmonella and E. coli at the end of the shelf-life whereas organoleptic criteria corresponded to absence of statistical difference between pressurized and unpressurized products. A tradeoff between safety and hygienic risk, color and taste, was then applied to define process and formulation enabling shelf-life extension. In the resulting operating window, one condition was experimentally assayed on naturally contaminated RTC products to validate the multi-criteria approach. As a conclusion, the framework was validated; it was possible to

Evaluation of ECG criteria for left ventricular hypertrophy before and after aortic valve replacement using magnetic resonance Imaging

NARCIS (Netherlands)

Beyerbacht, Hugo P.; Bax, Jeroen J.; Lamb, Hildo J.; van der Laarse, Arnoud; Vliegen, Hubert W.; de Roos, Albert; Zwinderman, Aeilko H.; van der Wall, Ernst E.

2003-01-01

PURPOSE: Evaluation of different electrocardiographic criteria for left ventricular hypertrophy (ECG-LVH criteria) using left ventricular mass index (LVMI) determined by magnetic resonance imaging (MRI). In addition, the relation between LVMI regression after aortic valve replacement and

Radwaste characteristics and Disposal Facility Waste Acceptance Criteria

International Nuclear Information System (INIS)

Sung, Suk Hyun; Jeong, Yi Yeong; Kim, Ki Hong

2008-01-01

The purpose of Radioactive Waste Acceptance Criteria (WAC) is to verify a radioactive waste compliance with radioactive disposal facility requirements in order to maintain a disposal facility's performance objectives and to ensure its safety. To develop WAC which is conformable with domestic disposal site conditions, we furthermore analysed the WAC of foreign disposal sites similar to the Kyung-Ju disposal site and the characteristics of various wastes which are being generated from Korea nuclear facilities. Radioactive WAC was developed in the technical cooperation with the Korea Atomic Energy Research Institute in consideration of characteristics of the wastes which are being generated from various facilities, waste generators' opinions and other conditions. The established criteria was also discussed and verified at an advisory committee which was comprised of some experts from universities, institutes and the industry. So radioactive WAC was developed to accept all wastes which are being generated from various nuclear facilities as much as possible, ensuring the safety of a disposal facility. But this developed waste acceptance criteria is not a criteria to accept all the present wastes generated from various nuclear facilities, so waste generators must seek an alternative treatment method for wastes which were not worth disposing of, and then they must treat the wastes more to be acceptable at a disposal site. The radioactive disposal facility WAC will continuously complement certain criteria related to a disposal concentration limit for individual radionuclide in order to ensure a long-term safety.

Exploring the Possibility of Peak Individualism, Humanity's Existential Crisis, and an Emerging Age of Purpose.

Science.gov (United States)

Grant, Gabriel B

2017-01-01

There is an emerging cultural narrative in the United States that we are entering an age of purpose-that millennials, more than any other generation, are searching for purpose and purposeful work (Sheahan, 2005) and that we are entering an era or economy of purpose (Hurst, 2014). For profit, non-profit, and educational institutions are perceiving and adapting to serve millennials' demand for purpose in life, specifically within the workplace (Klein et al., 2015). Yet, longitudinal studies of purpose do not exist, and millennials are also referred to as GenMe. Existing quantitative research suggests they (we) are increasingly individualistic, materialistic, and narcissistic (Greenfield, 2013). Google's digitization of millions of books and the Ngram Viewer allow for quantified analysis of culture over the past two centuries. This tool was used to quantitatively test the popular notion that there is a rise in demand for purpose. Analysis reveals a growing interest in purpose-in-life and a shift toward collectivistic values emerging over the lifespan of the millennial generation.

Packaging design criteria, transfer and disposal of 102-AP mixer pump

International Nuclear Information System (INIS)

Carlstrom, R.F.

1994-01-01

A mixer pump installed in storage tank 241-AP-102 (102-AP) has failed. This pump is referred to as the 102-AP mixer pump (APMP). The APMP will be removed from 102-AP 1 and a new pump will be installed. The main purpose of the Packaging Design Criteria (PDC) is to establish criteria necessary to design and fabricate a shipping container for the transfer and storage of the APMP from 102-AP. The PDC will be used as a guide to develop a Safety Evaluation for Packaging (SEP)

Design of mobile shelters for communication purposes

Science.gov (United States)

Lotens, W. A.; Leebeek, H. J.

1982-03-01

A general design for a future generation of shelters, to be used as mobile work places, is presented. Design criteria involve ergonomics, functional suitability, and air conditioning. Electronics, power supply, and personnel get their own compartments. Work space is provided for two people with room for two more. Center of mass and cable connections are considered. Air conditioning requirements are calculated with a computer program. The result is an integrated design, applicable to shelters for several purposes.

The Development of E-Portfolio Evaluation Criteria and Application to the Blackboard LMS E-Portfolio

Science.gov (United States)

McKenna, Gary F.; Stansfield, Mark H.

2012-01-01

The purpose of this paper is to develop e-portfolio evaluation criteria which will be used to review the Blackboard LMS e-portfolio being used at one Higher Education (HE) institution in the UK as evaluation criteria for reviewing e-portfolio provision does not exist in the literature. The approach taken was to initiate a wide literature search…

A Hybrid Network Model to Extract Key Criteria and Its Application for Brand Equity Evaluation

Directory of Open Access Journals (Sweden)

Chin-Yi Chen

2012-01-01

Full Text Available Making a decision implies that there are alternative choices to be considered, and a major challenge of decision-making is to identify the adequate criteria for program planning or problem evaluation. The decision-makers’ criteria consists of the characteristics or requirements each alternative must possess and the alternatives are rated on how well they possess each criterion. We often use criteria developed and used by different researchers and institutions, and these criteria have similar means and can be substituted for one another. Choosing from existing criteria offers a practical method to engineers hoping to derive a set of criteria for evaluating objects or programs. We have developed a hybrid model for extracting evaluation criteria which considers substitutions between the criteria. The model is developed based on Social Network Analysis and Maximum Mean De-Entropy algorithms. In this paper, the introduced methodology will also be applied to analyze the criteria for assessing brand equity as an application example. The proposed model demonstrates that it is useful in planning feasibility criteria and has applications in other evaluation-planning purposes.

Mass spectrometry as a quantitative tool in plant metabolomics

Science.gov (United States)

Jorge, Tiago F.; Mata, Ana T.

2016-01-01

Metabolomics is a research field used to acquire comprehensive information on the composition of a metabolite pool to provide a functional screen of the cellular state. Studies of the plant metabolome include the analysis of a wide range of chemical species with very diverse physico-chemical properties, and therefore powerful analytical tools are required for the separation, characterization and quantification of this vast compound diversity present in plant matrices. In this review, challenges in the use of mass spectrometry (MS) as a quantitative tool in plant metabolomics experiments are discussed, and important criteria for the development and validation of MS-based analytical methods provided. This article is part of the themed issue ‘Quantitative mass spectrometry’. PMID:27644967

Robust design requirements specification: a quantitative method for requirements development using quality loss functions

DEFF Research Database (Denmark)

Pedersen, Søren Nygaard; Christensen, Martin Ebro; Howard, Thomas J.

2016-01-01

Product requirements serve many purposes in the product development process. Most importantly, they are meant to capture and facilitate product goals and acceptance criteria, as defined by stakeholders. Accurately communicating stakeholder goals and acceptance criteria can be challenging and more...

LMFBR safety criteria: cost-benefit considerations under the constraint of an a priori risk criterion

International Nuclear Information System (INIS)

Hartung, J.

1979-01-01

The role of cost-benefit considerations and a priori risk criteria as determinants of Core Disruptive Accident (CDA)-related safety criteria for large LMFBR's is explored with the aid of quantitative risk and probabilistic analysis methods. A methodology is described which allows a large number of design and siting alternatives to be traded off against each other with the goal of minimizing energy generation costs subject to the constraint of both an a priori risk criterion and a cost-benefit criterion. Application of this methodology to a specific LMFBR design project is described and the results are discussed. 5 refs

Annual Earnings Announcements and Market Reaction: The Influence of Screening Criteria for Thin Trading

DEFF Research Database (Denmark)

Møller, Peder Fredslund; Thinggaard, Frank; Lønroth, Helle L.

2001-01-01

This paper presents the findings of an event study of the Danish stock market price reactions to annual earnings announcements in the period 1993-1997, with a dual purpose. The primary purpose is to find out how market reactions vary with different screening criteria for thin trading. Our findings...... on this point suggest that the Danish stock market, although small, seems to have different segments of shares in relation to earnings announcements. Applying different screening criteria we find differences both in terms of how quickly the market reacts to earnings announcements and the relative quality...... purpose of our study is briefly to compare our findings with those of a similar study for the period 1971-1981. The aim is to find indications of developments in the Danish market's reactions to earnings announcements since that study. We find distinct indications that the Danish stock market in some...

To what extent do science ESP learning materials fit the purpose for ...

African Journals Online (AJOL)

To what extent do science ESP learning materials fit the purpose for which they have been devised? An evaluation in terms of Cronje's (1993) criteria. ... Journal for Language Teaching. Journal Home · ABOUT THIS JOURNAL · Advanced ...

Exploring the Possibility of Peak Individualism, Humanity's Existential Crisis, and an Emerging Age of Purpose

Science.gov (United States)

Grant, Gabriel B.

2017-01-01

There is an emerging cultural narrative in the United States that we are entering an age of purpose—that millennials, more than any other generation, are searching for purpose and purposeful work (Sheahan, 2005) and that we are entering an era or economy of purpose (Hurst, 2014). For profit, non-profit, and educational institutions are perceiving and adapting to serve millennials' demand for purpose in life, specifically within the workplace (Klein et al., 2015). Yet, longitudinal studies of purpose do not exist, and millennials are also referred to as GenMe. Existing quantitative research suggests they (we) are increasingly individualistic, materialistic, and narcissistic (Greenfield, 2013). Google's digitization of millions of books and the Ngram Viewer allow for quantified analysis of culture over the past two centuries. This tool was used to quantitatively test the popular notion that there is a rise in demand for purpose. Analysis reveals a growing interest in purpose-in-life and a shift toward collectivistic values emerging over the lifespan of the millennial generation. PMID:28928689

Exploring the Possibility of Peak Individualism, Humanity's Existential Crisis, and an Emerging Age of Purpose

Directory of Open Access Journals (Sweden)

Gabriel B. Grant

2017-09-01

Full Text Available There is an emerging cultural narrative in the United States that we are entering an age of purpose—that millennials, more than any other generation, are searching for purpose and purposeful work (Sheahan, 2005 and that we are entering an era or economy of purpose (Hurst, 2014. For profit, non-profit, and educational institutions are perceiving and adapting to serve millennials' demand for purpose in life, specifically within the workplace (Klein et al., 2015. Yet, longitudinal studies of purpose do not exist, and millennials are also referred to as GenMe. Existing quantitative research suggests they (we are increasingly individualistic, materialistic, and narcissistic (Greenfield, 2013. Google's digitization of millions of books and the Ngram Viewer allow for quantified analysis of culture over the past two centuries. This tool was used to quantitatively test the popular notion that there is a rise in demand for purpose. Analysis reveals a growing interest in purpose-in-life and a shift toward collectivistic values emerging over the lifespan of the millennial generation.

Quantitative Statements in Standards of Three Accrediting Bodies: APA, CACREP, and CSWE.

Science.gov (United States)

Peterson, Marla P.; Turner, Janet

The accreditation manual of the Council for Accrediation of Counseling and Related Education Programs (CACREP) contains a statement that, whenever possible, criteria for assessing standards should be qualitative rather than quantitative. The study reported in this paper was conducted to gather baseline data on the extent to which accrediting…

Osteosarcoma subtypes: Magnetic resonance and quantitative diffusion weighted imaging criteria.

Science.gov (United States)

Zeitoun, Rania; Shokry, Ahmed M; Ahmed Khaleel, Sahar; Mogahed, Shaimaa M

2018-03-01

Osteosarcoma (OS) is a primary bone malignancy, characterized by spindle cells producing osteoid. The objective of this study is to describe the magnetic resonance imaging (MRI) features of different OS subtypes, record their attenuation diffusion coefficient (ADC) values and to point to the relation of their pathologic base and their corresponding ADC value. We performed a retrospective observational lesion-based analysis for 31 pathologically proven osteosarcoma subtypes: osteoblastic (n = 9), fibroblastic (n = 8), chondroblastic (n = 6), para-osteal (n = 3), periosteal (n = 1), telangiectatic (n = 2), small cell (n = 1) and extra-skeletal (n = 1). On conventional images we recorded: bone of origin, epicenter, intra-articular extension, and invasion of articulating bones, skip lesions, distant metastases, pathological fractures, ossified matrix, hemorrhage and necrosis. We measured the mean ADC value for each lesion. Among the included OS lesions, 51.6% originated at the femur, 29% showed intra-articular extension, 16% invaded neighboring bone, 9% were associated with pathological fracture and 25.8% were associated with distant metastases. On MRI, all lesions showed ossified matrix, 35.5% showed hemorrhage and 58% showed necrosis. The mean ADC values for OS lesions ranged from 0.74 × 10 -3  mm 2 /s (recorded for conventional osteoblastic OS) to 1.50 × 10 -3  mm 2 /s (recorded for telangiectatic OS) with an average value of 1.16 ± 0.18 × 10 -3  mm 2 /s. Conventional chondroblastic OS recorded higher values compared to the other two conventional subtypes. Osteosarcoma has different pathologic subtypes which correspondingly vary in their imaging criteria and their ADC values. Copyright © 2018. Production and hosting by Elsevier B.V.

Quantitative analysis of exercise 201Tl myocardial emission CT in patients with coronary artery disease

International Nuclear Information System (INIS)

Okada, Mitsuhiro; Kawai, Naoki; Yamamoto, Shuhei

1984-01-01

The clinical usefulness of quantitative analysis of exercise thallium-201 myocardial emission computed tomography (ECT) was evaluated in coronary artery disease (CAD). The subjects consisted of 20 CAD patients and five normal controls. All CAD patients underwent coronary angiography. Tomographic thallium-201 myocardial imaging was performed with a rotating gamma camera, and long-axial and short-axial myocardial images of the left ventricle were reconstructed. The tomographic images were interpreted quantitatively using circumferential profile analysis. Based on features of regional myocardial thallium-201 kinetics, two types of abnormalities were studied: (1) diminished initial distribution (stress defect) and (2) slow washout of thallium-201, as evidenced by patients' initial thallium-201 uptake and 3-hour washout rate profiles which fell below the normal limits, respectively. Two diagnostic criteria including the stress defect and a combination of the stress defect and slow washout were used to detect coronary artery lesions of significance (>=75 % luminal narrowing). The ischemic volumes were also evaluated by quantitative analysis using thallium-201 ECT. The diagnostic accuracy of the stress defect criterion was 95 % for left anterior descending, 90 % for right, and 70 % for left circumflex coronary artery lesions. The combined criteria of the stress defect and slow washout increased detection sensitivity with a moderate loss of specificity for identifying individual coronary artery lesion. A relatively high diagnostic accuracy was obtained using the stress defect criterion for multiple vessel disease (75 %). Ischemic myocardial volume was significantly larger in triple vessel than in single vessel disease (p < 0.05) using the combined criteria. It was concluded that quantitative analysis of exercise thallium-201 myocardial ECT images proves useful for evaluating coronary artery lesions. (author)

Articulating Material Criteria

DEFF Research Database (Denmark)

Hasling, Karen Marie

2013-01-01

This paper discusses the experiences and potentials with materials teaching at the Institute for Product Design at Kolding School of Design, using materials teaching as experiments in my PhD project. The project intents to create a stronger material awareness among product design students...... with emphasis on sustainability. The experiments aim to develop an understanding of, how product design students include materials in their design practice and how tools can be developed that further enhance this. Hence experiments are essential for the progress of the PhD project as they help to observe....... Furthermore the purpose is to initiate a discussion on, how to create educational tools for material awareness creation in the design education e.g. by applying objective and quantitative methods in an otherwise often subjective design process....

Noise Maps for Quantitative and Clinical Severity Towards Long-Term ECG Monitoring.

Science.gov (United States)

Everss-Villalba, Estrella; Melgarejo-Meseguer, Francisco Manuel; Blanco-Velasco, Manuel; Gimeno-Blanes, Francisco Javier; Sala-Pla, Salvador; Rojo-Álvarez, José Luis; García-Alberola, Arcadi

2017-10-25

Noise and artifacts are inherent contaminating components and are particularly present in Holter electrocardiogram (ECG) monitoring. The presence of noise is even more significant in long-term monitoring (LTM) recordings, as these are collected for several days in patients following their daily activities; hence, strong artifact components can temporarily impair the clinical measurements from the LTM recordings. Traditionally, the noise presence has been dealt with as a problem of non-desirable component removal by means of several quantitative signal metrics such as the signal-to-noise ratio (SNR), but current systems do not provide any information about the true impact of noise on the ECG clinical evaluation. As a first step towards an alternative to classical approaches, this work assesses the ECG quality under the assumption that an ECG has good quality when it is clinically interpretable. Therefore, our hypotheses are that it is possible (a) to create a clinical severity score for the effect of the noise on the ECG, (b) to characterize its consistency in terms of its temporal and statistical distribution, and (c) to use it for signal quality evaluation in LTM scenarios. For this purpose, a database of external event recorder (EER) signals is assembled and labeled from a clinical point of view for its use as the gold standard of noise severity categorization. These devices are assumed to capture those signal segments more prone to be corrupted with noise during long-term periods. Then, the ECG noise is characterized through the comparison of these clinical severity criteria with conventional quantitative metrics taken from traditional noise-removal approaches, and noise maps are proposed as a novel representation tool to achieve this comparison. Our results showed that neither of the benchmarked quantitative noise measurement criteria represent an accurate enough estimation of the clinical severity of the noise. A case study of long-term ECG is reported

Comparison of quantitative methods on FDG PET/CT for treatment response evaluation of metastatic colorectal cancer

Energy Technology Data Exchange (ETDEWEB)

Bang, Ji In; Paeng, Jin Chul; Park, So Hyun [Dept. of Nuclear Medicine, Seoul National University Hospital, Seoul (Korea, Republic of); and others

2017-06-15

FDG PET is effective in treatment response evaluation of cancer. However, there is no standard method for quantitative evaluation of FDG PET, particularly regarding cytostatic drugs. We compared various FDG PET quantitative methods in terms of response determination. A total of 39 refractory metastatic colorectal cancer patients who received a multikinase inhibitor treatment were included. Baseline and posttreatment FDG PET/CT scans were performed before and two cycles after treatment. Standardized uptake value (SUV) and total lesion glycolysis (TLG) values using various margin thresholds (30–70 % of maximum SUV with increment 10 %, twice mean SUV of blood pool, SUV 3.0, and SUV 4.0) were measured, with measurement target of the hottest lesion or a maximum of five hottest lesions. Treatment response by the PERCIST criteria was also determined. Predictive values of the PET indexes were evaluated in terms of the treatment response determined by the RECIST 1.1 criteria. The agreement rate was 38 % between response determined by the PERCIST and the RECIST criteria (κ = 0.381). When patients were classified into disease control group (PR, SD) and non-control group (PD) by the RECIST criteria, percent changes of TLG with various margin thresholds (particularly, 30–50 % of maximum SUV) exhibited significant differences between the two groups, and high diagnostic power for the response by the RECIST criteria. TLG-based criteria, which used a margin threshold of 50 % of maximum SUV, exhibited a high agreement with the RECIST criteria compared with the PERCIST criteria (κ = 0.606). In metastatic colorectal cancer, FDG PET/CT could be effective for treatment response evaluation by using TLG measured by margin thresholds of 30–50 % of maximum SUV. Further studies are warranted regarding the optimal cutoff values for this method.

Parametric biomedical imaging - what defines the quality of quantitative radiological approaches?

International Nuclear Information System (INIS)

Glueer, C.C.; Barkmann, R.; Bolte, H.; Heller, M.; Hahn, H.K.; Dicken, V.; Majumdar, S.; Eckstein, F.; Nickelsen, T.N.

2006-01-01

Quantitative parametric imaging approaches provide new perspectives for radiological imaging. These include quantitative 2D, 3D, and 4D visualization options along with the parametric depiction of biological tissue properties and tissue function. This allows the interpretation of radiological data from a biochemical, biomechanical, or physiological perspective. Quantification permits the detection of small changes that are not yet visually apparent, thus allowing application in early disease diagnosis and monitoring therapy with enhanced sensitivity. This review outlines the potential of quantitative parametric imaging methods and demonstrates this on the basis of a few exemplary applications. One field of particular interest, the use of these methods for investigational new drug application studies, is presented. Assessment criteria for judging the quality of quantitative imaging approaches are discussed in the context of the potential and the limitations of these methods. While quantitative parametric imaging methods do not replace but rather supplement established visual interpretation methods in radiology, they do open up new perspectives for diagnosis and prognosis and in particular for monitoring disease progression and therapy. (orig.)

MHA admission criteria and program performance: do they predict career performance?

Science.gov (United States)

Porter, J; Galfano, V J

1987-01-01

The purpose of this study was to determine to what extent admission criteria predict graduate school and career performance. The study also analyzed which objective and subjective criteria served as the best predictors. MHA graduates of the University of Minnesota from 1974 to 1977 were surveyed to assess career performance. Student files served as the data base on admission criteria and program performance. Career performance was measured by four variables: total compensation, satisfaction, fiscal responsibility, and level of authority. High levels of MHA program performance were associated with women who had high undergraduate GPAs from highly selective undergraduate colleges, were undergraduate business majors, and participated in extracurricular activities. High levels of compensation were associated with relatively low undergraduate GPAs, high levels of participation in undergraduate extracurricular activities, and being single at admission to graduate school. Admission to MHA programs should be based upon both objective and subjective criteria. Emphasis should be placed upon the selection process for MHA students since admission criteria are shown to explain 30 percent of the variability in graduate program performance, and as much as 65 percent of the variance in level of position authority.

Applied exposure modeling for residual radioactivity and release criteria

International Nuclear Information System (INIS)

Lee, D.W.

1989-01-01

The protection of public health and the environment from the release of materials with residual radioactivity for recycle or disposal as wastes without radioactive contents of concern presents a formidable challenge. Existing regulatory criteria are based on technical judgment concerning detectability and simple modeling. Recently, exposure modeling methodologies have been developed to provide a more consistent level of health protection. Release criteria derived from the application of exposure modeling methodologies share the same basic elements of analysis but are developed to serve a variety of purposes. Models for the support of regulations for all applications rely on conservative interpretations of generalized conditions while models developed to show compliance incorporate specific conditions not likely to be duplicated at other sites. Research models represent yet another type of modeling which strives to simulate the actual behavior of released material. In spite of these differing purposes, exposure modeling permits the application of sound and reasoned principles of radiation protection to the release of materials with residual levels of radioactivity. Examples of the similarities and differences of these models are presented and an application to the disposal of materials with residual levels of uranium contamination is discussed. 5 refs., 2 tabs

Applicability and agreement of different diagnostic criteria for sarcopenia estimation in the elderly.

Science.gov (United States)

Pagotto, Valéria; Silveira, Erika Aparecida

2014-01-01

The purpose of this study cross-sectional study comprising 132 community dwelling elderly (≥ 60 years) was to identify sarcopenia prevalence in the Brazilian elderly, utilizing different diagnostic criteria and analyze agreement between criteria. Sarcopenia was assessed by nine muscle mass diagnostic criteria, by two muscle strength criteria and also by the combination of criteria. Prevalence was analyzed for each method, along with differences by gender and age group through calculation of the prevalence ratio (PR) and confidence interval (CI) 95%. The Kappa coefficient was used to analyze the level of agreement between all criteria. Sarcopenia prevalence varied between 60.6% and 8.3% with the application of muscle mass criteria, and between 54.2% and 48.8% with the application of strength criteria. The combination muscle mass+strength resulted in a decrease of prevalence in all criteria, varying between 36.6% and 6.1%. There was an increase in prevalence according to age groups for all methods. Prevalence was higher for men according to three muscle mass criteria, and higher in women for strength criteria and by two combined mass+strength criteria. The best level of agreement was obtained for two methods that utilized dual energy X-ray absorptiometry (DXA). The prevalence of sarcopenia differs by gender and age and definition criteria. The low agreement levels obtained between methods and the different prevalence values encountered indicate the necessities of an operational definition for the estimation of sarcopenia in different population. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Revision of the European Ecolabel Criteria for Personal, Notebook and Tablet Computers TECHNICAL REPORT Summary of the final criteria proposals

OpenAIRE

DODD NICHOLAS; VIDAL ABARCA GARRIDO CANDELA; WOLF Oliver; GRAULICH Kathrin; BUNKE Dirk; GROSS Rita; LIU Ran; MANHART Andreas; PRAKASH Siddharth

2015-01-01

This technical report provide the background information for the revision of the EU Ecolabel criteria for Personal and Notebook Computers. The study has been carried out by the Joint Research Centre with technical support from the Oeko-Institut. The work has been developed for the European Commission's Directorate General for the Environment. The main purpose of this report is to provide a summary of the technical background and rationale for each criterion proposal. This document is compl...

Reptiles traded in markets for medicinal purposes in contemporary Morocco

NARCIS (Netherlands)

Nijman, V.; Bergin, D.

2017-01-01

Reptiles are traded globally for medicinal purposes. Historic qualitative accounts of reptiles used as medicine in Morocco are numerous, but contemporary quantitative data are rare. In 2013-2014, we surveyed 49 wildlife markets in 20 towns throughout Morocco, plus the Spanish exclaves of Ceuta and

A Study on the Basic Criteria for Selecting Heterogeneity Parameters of F18-FDG PET Images.

Directory of Open Access Journals (Sweden)

Attila Forgacs

Full Text Available Textural analysis might give new insights into the quantitative characterization of metabolically active tumors. More than thirty textural parameters have been investigated in former F18-FDG studies already. The purpose of the paper is to declare basic requirements as a selection strategy to identify the most appropriate heterogeneity parameters to measure textural features. Our predefined requirements were: a reliable heterogeneity parameter has to be volume independent, reproducible, and suitable for expressing quantitatively the degree of heterogeneity. Based on this criteria, we compared various suggested measures of homogeneity. A homogeneous cylindrical phantom was measured on three different PET/CT scanners using the commonly used protocol. In addition, a custom-made inhomogeneous tumor insert placed into the NEMA image quality phantom was imaged with a set of acquisition times and several different reconstruction protocols. PET data of 65 patients with proven lung lesions were retrospectively analyzed as well. Four heterogeneity parameters out of 27 were found as the most attractive ones to characterize the textural properties of metabolically active tumors in FDG PET images. These four parameters included Entropy, Contrast, Correlation, and Coefficient of Variation. These parameters were independent of delineated tumor volume (bigger than 25-30 ml, provided reproducible values (relative standard deviation< 10%, and showed high sensitivity to changes in heterogeneity. Phantom measurements are a viable way to test the reliability of heterogeneity parameters that would be of interest to nuclear imaging clinicians.

A Study on the Basic Criteria for Selecting Heterogeneity Parameters of F18-FDG PET Images

Science.gov (United States)

Forgacs, Attila; Pall Jonsson, Hermann; Dahlbom, Magnus; Daver, Freddie; D. DiFranco, Matthew; Opposits, Gabor; K. Krizsan, Aron; Garai, Ildiko; Czernin, Johannes; Varga, Jozsef; Tron, Lajos; Balkay, Laszlo

2016-01-01

Textural analysis might give new insights into the quantitative characterization of metabolically active tumors. More than thirty textural parameters have been investigated in former F18-FDG studies already. The purpose of the paper is to declare basic requirements as a selection strategy to identify the most appropriate heterogeneity parameters to measure textural features. Our predefined requirements were: a reliable heterogeneity parameter has to be volume independent, reproducible, and suitable for expressing quantitatively the degree of heterogeneity. Based on this criteria, we compared various suggested measures of homogeneity. A homogeneous cylindrical phantom was measured on three different PET/CT scanners using the commonly used protocol. In addition, a custom-made inhomogeneous tumor insert placed into the NEMA image quality phantom was imaged with a set of acquisition times and several different reconstruction protocols. PET data of 65 patients with proven lung lesions were retrospectively analyzed as well. Four heterogeneity parameters out of 27 were found as the most attractive ones to characterize the textural properties of metabolically active tumors in FDG PET images. These four parameters included Entropy, Contrast, Correlation, and Coefficient of Variation. These parameters were independent of delineated tumor volume (bigger than 25–30 ml), provided reproducible values (relative standard deviation< 10%), and showed high sensitivity to changes in heterogeneity. Phantom measurements are a viable way to test the reliability of heterogeneity parameters that would be of interest to nuclear imaging clinicians. PMID:27736888

Combining the IADPSG criteria with the WHO diagnostic criteria for ...

African Journals Online (AJOL)

Macrosomia or at least one adverse outcome were more likely in GDM patients who met the diagnostic criteria by both the IADPSG and WHO criteria (P = 0.001). Conclusion: A diagnosis of GDM that meets both the WHO and IADPSG criteria provides stronger prediction for adverse pregnancy outcome than a diagnosis that ...

Common QA/QM Criteria for Multinational Vendor Inspection

International Nuclear Information System (INIS)

2014-01-01

This VICWG document provides the 'Common QA/QM Criteria' which will be used in Multinational Vendor Inspection. The 'Common QA/QM Criteria' provides the basic consideration when performing the Vendor Inspection. These criteria has been developed in conformity with International Codes and Standards such as IAEA, ISO and so on that MDEP member countries adopted. The purpose of the VICWG is to establish areas of co-operation in the Vendor Inspection practices among MDEP member countries as described in the MDEP issue-specific Terms of Reference (ToR). As part of this, from the beginning, a survey was performed to understand and to identify areas of commonality and differences between regulatory practices of member countries in the area of vendor inspection. The VICWG also collaborated by performing Witnessed Inspections and Joint Inspections. Through these activities, it was recognized that member countries commonly apply the IAEA safety standard (GS-R-3) to the vendor inspection criteria, and almost ail European member countries apply the ISO standard (ISO9001). In the US, the NRC regulatory requirement in 10 CFR, Part 50, Appendix B is used. South Korea uses the same criteria as in the US. As a result of the information obtained, a comparison table between codes and standards (IAEAGS-R-3, ISO 9001:2008.10CFR50 Appendix Band ASME NQA-1) has been developed in order to inform the development of 'Common QA/QM Criteria'. The result is documented in Table 1, 'MDEP CORE QA/QM Requirement and Comparison between Codes and Standards'. In addition, each country's criteria were compared with the US 10CFR50 Appendix B as a template. Table 2 shows VICWG Survey on Quality Assurance Program Requirements. Through these activities above, we considered that the core requirements should be consistent with both IAEA safety standard and ISO standard, and considered that the common requirements in the US 10CFR50 Appendix B used to the survey

Quantitative evaluation of fluctuation error in X-ray diffraction profiles with fractal analysis

International Nuclear Information System (INIS)

Kurose, Masashi; Hirose, Yukio; Sasaki, Toshihiko; Yoshioka, Yasuo.

1995-01-01

A method of the fractal analysis was applied to the diffraction profiles for its quantitative evaluation. The fractal dimension was analyzed according to both Box counting method and FFT method. The relationship between the fractal dimension and the measurement criteria in X-ray diffraction analysis was discussed with diffraction data obtained under various conditions of the measurement. It was concluded that the fractal analysis is effective for the quantitative evaluation of diffraction data. Box counting method is suitable for evaluation of a whole profile, and FFT method is for that of a fundamental profile. The range of desirable condition of measurement is 1.0≤D≤1.2, where D is a fractal dimension. The appropriate range of measurement becomes 0.01≤Sw/HVB≤0.03, where Sw is the step width and the HVB is the half-value breadth. Stresses with higher precision were obtained from measurements under this new criteria. (author)

HOSPITAL SITE SELECTION USING TWO-STAGE FUZZY MULTI-CRITERIA DECISION MAKING PROCESS

Directory of Open Access Journals (Sweden)

Ali Soltani

2011-06-01

Full Text Available Site selection for sitting of urban activities/facilities is one of the crucial policy-related decisions taken by urban planners and policy makers. The process of site selection is inherently complicated. A careless site imposes exorbitant costs on city budget and damages the environment inevitably. Nowadays, multi-attributes decision making approaches are suggested to use to improve precision of decision making and reduce surplus side effects. Two well-known techniques, analytical hierarchal process and analytical network process are among multi-criteria decision making systems which can easily be consistent with both quantitative and qualitative criteria. These are also developed to be fuzzy analytical hierarchal process and fuzzy analytical network process systems which are capable of accommodating inherent uncertainty and vagueness in multi-criteria decision-making. This paper reports the process and results of a hospital site selection within the Region 5 of Shiraz metropolitan area, Iran using integrated fuzzy analytical network process systems with Geographic Information System (GIS. The weights of the alternatives were calculated using fuzzy analytical network process. Then a sensitivity analysis was conducted to measure the elasticity of a decision in regards to different criteria. This study contributes to planning practice by suggesting a more comprehensive decision making tool for site selection.

HOSPITAL SITE SELECTION USING TWO-STAGE FUZZY MULTI-CRITERIA DECISION MAKING PROCESS

Directory of Open Access Journals (Sweden)

Ali Soltani

2011-01-01

Full Text Available Site selection for sitting of urban activities/facilities is one of the crucial policy-related decisions taken by urban planners and policy makers. The process of site selection is inherently complicated. A careless site imposes exorbitant costs on city budget and damages the environment inevitably. Nowadays, multi-attributes decision making approaches are suggested to use to improve precision of decision making and reduce surplus side effects. Two well-known techniques, analytical hierarchal process and analytical network process are among multi-criteria decision making systems which can easily be consistent with both quantitative and qualitative criteria. These are also developed to be fuzzy analytical hierarchal process and fuzzy analytical network process systems which are capable of accommodating inherent uncertainty and vagueness in multi-criteria decision-making. This paper reports the process and results of a hospital site selection within the Region 5 of Shiraz metropolitan area, Iran using integrated fuzzy analytical network process systems with Geographic Information System (GIS. The weights of the alternatives were calculated using fuzzy analytical network process. Then a sensitivity analysis was conducted to measure the elasticity of a decision in regards to different criteria. This study contributes to planning practice by suggesting a more comprehensive decision making tool for site selection.

Determination of scutellarin in breviscapine preparations using quantitative proton nuclear magnetic resonance spectroscopy

Directory of Open Access Journals (Sweden)

Zhenzuo Jiang

2016-04-01

Full Text Available The objective of the present study was to develop the selection criteria of proton signals for the determination of scutellarin using quantitative nuclear magnetic resonance (qNMR, which is the main bioactive compound in breviscapine preparations for the treatment of cerebrovascular disease. The methyl singlet signal of 3-(trimethylsilylpropionic-2,2,3,3-d4 acid sodium salt was selected as the internal standard for quantification. The molar concentration of scutellarin was determined by employing different proton signals. To obtain optimum proton signals for the quantification, different combinations of proton signals were investigated according to two selection criteria: the recovery rate of qNMR method and quantitative results compared with those obtained with ultra-performance liquid chromatography. As a result, the chemical shift of H-2′ and H-6′ at δ 7.88 was demonstrated as the most suitable signal with excellent linearity range, precision, and recovery for determining scutellarin in breviscapine preparations from different manufacturers, batch numbers, and dosage forms. Hierarchical cluster analysis was employed to evaluate the determination results. The results demonstrated that the selection criteria of proton signals established in this work were reliable for the qNMR study of scutellarin in breviscapine preparations.

Validation of proposed diagnostic criteria (the "Budapest Criteria") for Complex Regional Pain Syndrome.

Science.gov (United States)

Harden, R Norman; Bruehl, Stephen; Perez, Roberto S G M; Birklein, Frank; Marinus, Johan; Maihofner, Christian; Lubenow, Timothy; Buvanendran, Asokumar; Mackey, Sean; Graciosa, Joseph; Mogilevski, Mila; Ramsden, Christopher; Chont, Melissa; Vatine, Jean-Jacques

2010-08-01

Current IASP diagnostic criteria for CRPS have low specificity, potentially leading to overdiagnosis. This validation study compared current IASP diagnostic criteria for CRPS to proposed new diagnostic criteria (the "Budapest Criteria") regarding diagnostic accuracy. Structured evaluations of CRPS-related signs and symptoms were conducted in 113 CRPS-I and 47 non-CRPS neuropathic pain patients. Discriminating between diagnostic groups based on presence of signs or symptoms meeting IASP criteria showed high diagnostic sensitivity (1.00), but poor specificity (0.41), replicating prior work. In comparison, the Budapest clinical criteria retained the exceptional sensitivity of the IASP criteria (0.99), but greatly improved upon the specificity (0.68). As designed, the Budapest research criteria resulted in the highest specificity (0.79), again replicating prior work. Analyses indicated that inclusion of four distinct CRPS components in the Budapest Criteria contributed to enhanced specificity. Overall, results corroborate the validity of the Budapest Criteria and suggest they improve upon existing IASP diagnostic criteria for CRPS. Copyright (c) 2010 International Association for the Study of Pain. Published by Elsevier B.V. All rights reserved.

High level waste repository site suitability criteria. Environmental impact statement methodology

International Nuclear Information System (INIS)

1977-06-01

The approach (methodology) which has been developed for the preparation of the environmental impact statement (EIS) is described. A suggested outline is presented for the High Level Waste Repository Site Suitability Criteria EIS together with a detailed description of the approach to be used in preparing the EIS. In addition, a methodology is presented by which the necessary cost/benefit/risk comparisons of alternative sets of site suitability criteria can be made. The TERA environmental research data bank, a computerized data bank which contained information on current and historical licensing activities for power plants was modified to include information on generic or programmatic EIS related issues. The content of the modified data bank was utilized to develop the EIS outline presented in this report. The report recommends that a modified matrix evaluation approach be used to make the cost/benefit/risk comparisons. The suggested matrix is designed to facilitate between criteria comparative analyses of economic, environmental, sociological and radiological risk factors. The quantitative compositing of dollar cost and benefits, environmental and sociological impacts, and radiological risks is to be performed using a semi-analytical, semi-visual procedure based on the concept of ''decision surfaces.''

Risk prediction, safety analysis and quantitative probability methods - a caveat

International Nuclear Information System (INIS)

Critchley, O.H.

1976-01-01

Views are expressed on the use of quantitative techniques for the determination of value judgements in nuclear safety assessments, hazard evaluation, and risk prediction. Caution is urged when attempts are made to quantify value judgements in the field of nuclear safety. Criteria are given the meaningful application of reliability methods but doubts are expressed about their application to safety analysis, risk prediction and design guidances for experimental or prototype plant. Doubts are also expressed about some concomitant methods of population dose evaluation. The complexities of new designs of nuclear power plants make the problem of safety assessment more difficult but some possible approaches are suggested as alternatives to the quantitative techniques criticized. (U.K.)

Admission Criteria for MBA Programs

Directory of Open Access Journals (Sweden)

Silvana Dakduk

2016-11-01

Full Text Available This paper reports a review of studies on admission criteria for MBA programs. The method consisted in a literary review based on a systematic search in international databases (Emerald, ABI/INFORM Global, ProQuest Education Journals, ProQuest European Business, ProQuest Science Journal, ProQuest Research Library, ProQuest Psychology Journals, ProQuest Social Science Journals and Business Source Complete of studies published from January 1990 to December 2013, which explore the academic performance of students or graduates of MBA programs. A quantitative review was performed. Results show that most researchers studied relations between GMAT (Graduate Management Admission Test and UGPA (Undergraduate Grade Point Average as predictors of GGPA (Graduate Grade Point Average. On the other hand, work experience and personal traits (such as personality, motivation, learning strategies, self-efficacy beliefs and achievement expectations and their relation with GGPA had been less studied, and results are not consistent enough to consider them valid predictors of student performance at this time.

Criteria Considerations for Establishment of Hems Operations

Directory of Open Access Journals (Sweden)

Borivoj Galović

2007-05-01

Full Text Available The importance of the "golden hour"; for optimal efficiencyof helicopter operations in emergency medical service (HEMSto meet the "golden hour" requirement the unconditional requirementis to establish a net of operational units to cover theentire area of the Republic of Croatia, capable to operate withinwide integrated area (international services. It is additionalback-up, not a competition to road and sea EMS vehicles. Therequired standards; HEMS operation, following complementarytraffic policy, i. e. complementary policy in line of trafficsystem integration within wider region, with reference to standards,must entirely comply with globally accepted standards.Republic of Croatia 's obvious objectives are traffic integrationinto EU (European Union traffic system. Cost analyses; It isstressed that coherent traffic policy can by certain instrumentsreduce traffic assigned external cost in national budget. Significanttraffic external cost includes cost of traffic accidents, environmentimpacts and traffic jams, and could be reduced byestablishmentof multi-purpose helicopter operations. SWOTanalyses should be made as for any other strategy or project.Technical-technological criteria and other considerations;Considering technical-technological criteria for relief of criticalsituations in traffic, it is obvious that one helicopter type cannotcomply to all multi-purpose requirements that traffic sets beforeus - EMS on open roads, sea, mountains and urban trafficcongested area, and search and rescue operations. However,common factor for all types is compliance to global standardsand regulations. In the paper, some examples of HEMS operationsin the EU States are mentioned.

Structural analysis of ITER multi-purpose deployer

International Nuclear Information System (INIS)

Manuelraj, Manoah Stephen; Dutta, Pramit; Gotewal, Krishan Kumar; Rastogi, Naveen; Tesini, Alessandro; Choi, Chang-Hwan

2016-01-01

Highlights: • System modelling for structural analysis of the Multi-Purpose Deployer (MPD). • Finite element modeling of the Multi-Purpose Deployer (MPD). • Static, modal and seismic response analysis of the Multi-Purpose Deployer (MPD). • Iterative structural analysis and design update to satisfy the structural criteria. • Modal analysis for various kinematic configurations. • Reaction force calculations on the interfacing systems. - Abstract: The Multi-Purpose Deployer (MPD) is a general purpose ITER in-vessel remote handling (RH) system. The main handling equipment, known as the MPD Transporter, consists of a series of linked bodies, which provide anchoring to the vacuum vessel port and an articulated multi-degree of freedom motion to perform various in-vessel maintenance tasks. During the in-vessel operations, the structural integrity of the system should be guaranteed against various operational and seismic loads. This paper presents the structural analysis results of the concept design of the MPD Transporter considering the seismic events. Static structural, modal and frequency response spectrum analyses have been performed to verify the structural integrity of the system, and to provide reaction forces to the interfacing systems such as vacuum vessel and cask. Iterative analyses and design updates are carried out based on the reference design of the system to improve the structural behavior of the system. The frequency responses of the system in various kinematics and payloads are assessed.

NWTS program criteria for mined geologic disposal of nuclear wasite: site performance criteria

International Nuclear Information System (INIS)

1981-02-01

This report states ten criteria governing the suitability of sites for mined geologic disposal of high-level radioactive waste. The Department of Energy will use these criteria in its search for sites and will reevaluate their use when the Nuclear Regulatory Commission issues radioactive waste repository rules. These criteria encompass site geometry, geohydrology, geochemistry, geologic characteristics, tectonic environment, human intrusion, surface characteristics, environment, and potential socioeconomic impacts. The contents of this document include background discussion, site performance criteria, and appendices. The background section describes the waste disposal system, the application of the site criteria, and applicable criteria from NWTS-33(1) - Program Objectives, Functional Requirements and System Performance Criteria. Appendix A, entitled Comparison with Other Siting Criteria compares the NWTS criteria with those recommended by other agencies. Appendix B contains DOE responses to public comments received on the January 1980 draft of this document. Appendix C is a glossary

Taking the U.S. Patent Office Criteria Seriously: A Quantitative Three-Criterion Creativity Definition and Its Implications

Science.gov (United States)

Simonton, Dean Keith

2012-01-01

Although creativity has recently attracted considerable theoretical and empirical research, researchers have yet to reach a consensus on how best to define the phenomenon. To help establish a consensus, a definition is proposed that is based on the three criteria used by the United States Patent Office to evaluate applications for patent…

Quantitative phase determination by using a Michelson interferometer

International Nuclear Information System (INIS)

Pomarico, Juan A; Molina, Pablo F; Angelo, Cristian D'

2007-01-01

The Michelson interferometer is one of the best established tools for quantitative interferometric measurements. It has been, and is still successfully used, not only for scientific purposes, but it is also introduced in undergraduate courses for qualitative demonstrations as well as for quantitative determination of several properties such as refractive index, wavelength, optical thickness, etc. Generally speaking, most of the measurements are carried out by determining phase distortions through the changes in the location and/or shape of the interference fringes. However, the extreme sensitivity of this tool, for which minimum deviations of the conditions of its branches can cause very large modifications in the fringe pattern, makes phase changes difficult to follow and measure. The purpose of this communication is to show that, under certain conditions, the sensitivity of the Michelson interferometer can be 'turned down' allowing the quantitative measurement of phase changes with relative ease. As an example we present how the angle (or, optionally, the refractive index) of a transparent standard optical wedge can be determined. Experimental results are shown and compared with the data provided by the manufacturer showing very good agreement

Quantitative Reasoning Learning Progressions for Environmental Science: Developing a Framework

Directory of Open Access Journals (Sweden)

Robert L. Mayes

2013-01-01

Full Text Available Quantitative reasoning is a complex concept with many definitions and a diverse account in the literature. The purpose of this article is to establish a working definition of quantitative reasoning within the context of science, construct a quantitative reasoning framework, and summarize research on key components in that framework. Context underlies all quantitative reasoning; for this review, environmental science serves as the context.In the framework, we identify four components of quantitative reasoning: the quantification act, quantitative literacy, quantitative interpretation of a model, and quantitative modeling. Within each of these components, the framework provides elements that comprise the four components. The quantification act includes the elements of variable identification, communication, context, and variation. Quantitative literacy includes the elements of numeracy, measurement, proportional reasoning, and basic probability/statistics. Quantitative interpretation includes the elements of representations, science diagrams, statistics and probability, and logarithmic scales. Quantitative modeling includes the elements of logic, problem solving, modeling, and inference. A brief comparison of the quantitative reasoning framework with the AAC&U Quantitative Literacy VALUE rubric is presented, demonstrating a mapping of the components and illustrating differences in structure. The framework serves as a precursor for a quantitative reasoning learning progression which is currently under development.

Phase-based vascular input function: Improved quantitative DCE-MRI of atherosclerotic plaques

NARCIS (Netherlands)

van Hoof, R. H. M.; Hermeling, E.; Truijman, M. T. B.; van Oostenbrugge, R. J.; Daemen, J. W. H.; van der Geest, R. J.; van Orshoven, N. P.; Schreuder, A. H.; Backes, W. H.; Daemen, M. J. A. P.; Wildberger, J. E.; Kooi, M. E.

2015-01-01

Purpose: Quantitative pharmacokinetic modeling of dynamic contrast-enhanced (DCE)-MRI can be used to assess atherosclerotic plaque microvasculature, which is an important marker of plaque vulnerability. Purpose of the present study was (1) to compare magnitude-versus phase-based vascular input

A stakeholder-informed approach to the identification of criteria for the prioritization of zoonoses in Canada.

Directory of Open Access Journals (Sweden)

Victoria Ng

Full Text Available Zoonotic diseases account for over 60% of all communicable diseases causing illness in humans and 75% of recently emerging infectious diseases. As limited resources are available for the control and prevention of zoonotic diseases, it is necessary to prioritize diseases in order to direct resources into those with the greatest needs. The selection of criteria for prioritization has traditionally been on the basis of expert opinion; however, details of the methods used to identify criteria from expert opinion often are not published and a full range of criteria may not be captured by expert opinion.This study used six focus groups to identify criteria for the prioritization of zoonotic diseases in Canada. Focus groups included people from the public, animal health professionals and human health professionals. A total of 59 criteria were identified for prioritizing zoonotic diseases. Human-related criteria accounted for the highest proportion of criteria identified (55%, followed by animal-related criteria (26% then pathogen/disease-related criteria (19%. Similarities and differences were observed in the identification and scoring of criteria for disease prioritization between groups; the public groups were strongly influenced by the individual-level of disease burden, the responsibility of the scientific community in disease prioritization and the experiences of recent events while the professional groups were influenced by the societal- and population-level of disease burden and political and public pressure.This was the first study to describe a mixed semi-quantitative and qualitative approach to deriving criteria for disease prioritization. This was also the first study to involve the opinion of the general public regarding disease prioritization. The number of criteria identified highlights the difficulty in prioritizing zoonotic diseases. The method presented in this paper has formulated a comprehensive list of criteria that can be used to

Normal values for quantitative muscle ultrasonography in adults.

NARCIS (Netherlands)

Arts, I.M.P.; Pillen, S.; Schelhaas, H.J.; Overeem, S.; Zwarts, M.J.

2010-01-01

Ultrasonography can detect structural muscle changes caused by neuromuscular disease. Quantitative analysis is the preferred method to determine if ultrasound findings are within normal limits, but normative data are incomplete. The purpose of this study was to provide normative muscle

Surgical criteria for femoroacetabular impingement syndrome: a scoping review.

Science.gov (United States)

Peters, Scott; Laing, Alisha; Emerson, Courtney; Mutchler, Kelsey; Joyce, Thomas; Thorborg, Kristian; Hölmich, Per; Reiman, Michael

2017-11-01

The purpose of this review was to analyse and report criteria used for open and arthroscopic surgical treatment of femoroacetabular impingement syndrome (FAIS). A librarian-assisted computer search of Medline, CINAHL and Embase for studies related to criterion for FAIS surgery was used in this study. Inclusion criteria included studies with the primary purpose of surgery or surgical outcomes for treatment of FAIS with and without labral tear, and reporting criteria for FAIS surgery. Diagnostic imaging was a criterion for surgery in 92% of the included studies, with alpha angle the most frequently reported (68% of studies) criterion. Reporting of symptoms was a criterion for surgery in 75%, and special tests a criterion in 70% of studies. Range-of-motion limitations were only a required criterion in 30%, only 12% of studies required intra-articular injection and 44% of studies described previously failed treatment (non-surgical or physiotherapist-led rehabilitation) as a criterion for surgery. Only 56% of included studies utilised the combination of symptoms, clinical signs and diagnostic imaging combined for diagnosis of FAIS as suggested by the Warwick Agreement on FAIS meeting. Diagnostic imaging evidence of FAIS was the most commonly reported criterion for surgery. Only 56% of included studies utilised the combination of symptoms, clinical signs and diagnostic imaging for diagnosis of FAIS as suggested by the Warwick Agreement on FAIS meeting, and only 44% of studies had failed non-surgical treatment (and 18% a failed trial of physiotherapy) as a criterion for surgery. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Development and applications of quantitative NMR spectroscopy

International Nuclear Information System (INIS)

Yamazaki, Taichi

2016-01-01

Recently, quantitative NMR spectroscopy has attracted attention as an analytical method which can easily secure traceability to SI unit system, and discussions about its accuracy and inaccuracy are also started. This paper focuses on the literatures on the advancement of quantitative NMR spectroscopy reported between 2009 and 2016, and introduces both NMR measurement conditions and actual analysis cases in quantitative NMR. The quantitative NMR spectroscopy using an internal reference method enables accurate quantitative analysis with a quick and versatile way in general, and it is possible to obtain the precision sufficiently applicable to the evaluation of pure substances and standard solutions. Since the external reference method can easily prevent contamination to samples and the collection of samples, there are many reported cases related to the quantitative analysis of biologically related samples and highly scarce natural products in which NMR spectra are complicated. In the precision of quantitative NMR spectroscopy, the internal reference method is superior. As the quantitative NMR spectroscopy widely spreads, discussions are also progressing on how to utilize this analytical method as the official methods in various countries around the world. In Japan, this method is listed in the Pharmacopoeia and Japanese Standard of Food Additives, and it is also used as the official method for purity evaluation. In the future, this method will be expected to spread as the general-purpose analysis method that can ensure traceability to SI unit system. (A.O.)

Quantitative information in medical imaging

International Nuclear Information System (INIS)

Deconinck, F.

1985-01-01

When developing new imaging or image processing techniques, one constantly has in mind that the new technique should provide a better, or more optimal answer to medical tasks than existing techniques do 'Better' or 'more optimal' imply some kind of standard by which one can measure imaging or image processing performance. The choice of a particular imaging modality to answer a diagnostic task, such as the detection of coronary artery stenosis is also based on an implicit optimalisation of performance criteria. Performance is measured by the ability to provide information about an object (patient) to the person (referring doctor) who ordered a particular task. In medical imaging the task is generally to find quantitative information on bodily function (biochemistry, physiology) and structure (histology, anatomy). In medical imaging, a wide range of techniques is available. Each technique has it's own characteristics. The techniques discussed in this paper are: nuclear magnetic resonance, X-ray fluorescence, scintigraphy, positron emission tomography, applied potential tomography, computerized tomography, and compton tomography. This paper provides a framework for the comparison of imaging performance, based on the way the quantitative information flow is altered by the characteristics of the modality

A Systematic Review of Quantitative Resilience Measures for Water Infrastructure Systems

Directory of Open Access Journals (Sweden)

Sangmin Shin

2018-02-01

Full Text Available Over the past few decades, the concept of resilience has emerged as an important consideration in the planning and management of water infrastructure systems. Accordingly, various resilience measures have been developed for the quantitative evaluation and decision-making of systems. There are, however, numerous considerations and no clear choice of which measure, if any, provides the most appropriate representation of resilience for a given application. This study provides a critical review of quantitative approaches to measure the resilience of water infrastructure systems, with a focus on water resources and distribution systems. A compilation of 11 criteria evaluating 21 selected resilience measures addressing major features of resilience is developed using the Axiomatic Design process. Existing gaps of resilience measures are identified based on the review criteria. The results show that resilience measures have generally paid less attention to cascading damage to interrelated systems, rapid identification of failure, physical damage of system components, and time variation of resilience. Concluding the paper, improvements to resilience measures are recommended. The findings contribute to our understanding of gaps and provide information to help further improve resilience measures of water infrastructure systems.

Gout Classification Criteria: Update and Implications

Science.gov (United States)

Vargas-Santos, Ana Beatriz; Taylor, William J.

2016-01-01

Gout is the most common inflammatory arthritis, with a rising prevalence and incidence worldwide. There has been a resurgence in gout research, fueled, in part, by a number of advances in pharmacologic therapy for gout. The conduct of clinical trials and other observational research in gout requires a standardized and validated means of assembling well-defined groups of patients with gout for such research purposes. Recently, an international collaborative effort that involved a data-driven process with state-of-the art methodology supported by the American College of Rheumatology and the European League Against Rheumatism led to publication of new gout classification criteria. PMID:27342957

Plutonium storage criteria

Energy Technology Data Exchange (ETDEWEB)

Chung, D. [Scientech, Inc., Germantown, MD (United States); Ascanio, X. [Dept. of Energy, Germantown, MD (United States)

1996-05-01

The Department of Energy has issued a technical standard for long-term (>50 years) storage and will soon issue a criteria document for interim (<20 years) storage of plutonium materials. The long-term technical standard, {open_quotes}Criteria for Safe Storage of Plutonium Metals and Oxides,{close_quotes} addresses the requirements for storing metals and oxides with greater than 50 wt % plutonium. It calls for a standardized package that meets both off-site transportation requirements, as well as remote handling requirements from future storage facilities. The interim criteria document, {open_quotes}Criteria for Interim Safe Storage of Plutonium-Bearing Solid Materials{close_quotes}, addresses requirements for storing materials with less than 50 wt% plutonium. The interim criteria document assumes the materials will be stored on existing sites, and existing facilities and equipment will be used for repackaging to improve the margin of safety.

Sex-specific criteria for interpretation of thallium-201 myocardial uptake and washout studies

International Nuclear Information System (INIS)

Rabinovitch, M.; Suissa, S.; Elstein, J.

1986-01-01

A study was undertaken to determine the effect of gender on criteria for the quantitative analysis of exercise-redistribution 201 Tl myocardial scintigraphy. The studies of 26 normal females and 23 normal males were subjected to bilinear interpolative background subtraction and horizontal profile analysis. Significant sexual differences were found in both regional uptake ratios and washout rates. These differences primarily reflected a proportionately decreased anterior and upper septal uptake in females, and faster washout in females. Faster myocardial 201 Tl washout rates in females could not be clearly ascribed to either a physiological or artifactual explanation. It is concluded that since important differences exist between males and females in the detected pattern of 201 Tl myocardial uptake and washout, sex-specific criteria may enhance the predictive accuracy of exercise-redistribution 201 Tl myocardial scintigraphy

A F o cus on Far Eastern Tourists – Tour Operator Selection Criteria

Directory of Open Access Journals (Sweden)

Ayşe Çelik

2014-03-01

Full Text Available Tour operators are becoming more important in the long haul destination market. Identifying tour operator selection criteria is crucial to orientate marketing strategies. The aim of the study was to determine the tour operation selection criteria of a package holiday maker visiting Turkey from the Far East according to the nationality. Data was drawn up and analyzed from tourists who came from three of these countries namely: Japan, South Korea, and China between February and April 2013 in Cappadocia. Quantitative methodology employing One-way ANOVA analysis was used. Deduction was made by analysing the tour operator selection criteria data that nationality was not a meaningful differentiation for a tourist in their assessment of the “Service Quality’” and “Opportunity to interact with other people’” items referred to in the survey questionnaire. Other items from the resulting data gave meaningful differences in cross - cultural behaviour. Results from the study provide important cues for tour operator managers to consider developing different promotional strategy initiatives to engage and attract more Japanese, South Korean, and Chinese tourists to Turkey.

A Monte-Carlo game theoretic approach for Multi-Criteria Decision Making under uncertainty

Science.gov (United States)

Madani, Kaveh; Lund, Jay R.

2011-05-01

Game theory provides a useful framework for studying Multi-Criteria Decision Making problems. This paper suggests modeling Multi-Criteria Decision Making problems as strategic games and solving them using non-cooperative game theory concepts. The suggested method can be used to prescribe non-dominated solutions and also can be used as a method to predict the outcome of a decision making problem. Non-cooperative stability definitions for solving the games allow consideration of non-cooperative behaviors, often neglected by other methods which assume perfect cooperation among decision makers. To deal with the uncertainty in input variables a Monte-Carlo Game Theory (MCGT) approach is suggested which maps the stochastic problem into many deterministic strategic games. The games are solved using non-cooperative stability definitions and the results include possible effects of uncertainty in input variables on outcomes. The method can handle multi-criteria multi-decision-maker problems with uncertainty. The suggested method does not require criteria weighting, developing a compound decision objective, and accurate quantitative (cardinal) information as it simplifies the decision analysis by solving problems based on qualitative (ordinal) information, reducing the computational burden substantially. The MCGT method is applied to analyze California's Sacramento-San Joaquin Delta problem. The suggested method provides insights, identifies non-dominated alternatives, and predicts likely decision outcomes.

Nuclear waste disposal: two social criteria

International Nuclear Information System (INIS)

Rochlin, G.I.

1977-01-01

Two criteria--technical irreversibility and site multiplicity--have been suggested for use in establishing standards for the disposal of nuclear wastes. They have been constructed specifically to address the reduction of future risk in the face of inherent uncertainty concerning the social and political developments that might occur over the required periods of waste isolation, to provide for safe disposal without the requirement of a guaranteed future ability to recognize, detect, or repair errors and failures. Decisions as to how to apply or weigh these criteria in conjunction with other waste management goals must be made by societies and their governments. The purpose of this paper was not to preempt this process, but to construct a framework that facilitates consideration of the ethical and normative components of the problem of nuclear waste disposal. The minimum ethical obligation of a waste disposal plan is to examine most thoroughly the potential consequences of present actions, to acknowledge them openly, and to minimize the potential for irremediable harm. An ethically sound waste management policy must reflect not only our knowledge and skills, but our limitations as well

Surrogate Endpoint Evaluation: Principal Stratification Criteria and the Prentice Definition.

Science.gov (United States)

Gilbert, Peter B; Gabriel, Erin E; Huang, Ying; Chan, Ivan S F

2015-09-01

A common problem of interest within a randomized clinical trial is the evaluation of an inexpensive response endpoint as a valid surrogate endpoint for a clinical endpoint, where a chief purpose of a valid surrogate is to provide a way to make correct inferences on clinical treatment effects in future studies without needing to collect the clinical endpoint data. Within the principal stratification framework for addressing this problem based on data from a single randomized clinical efficacy trial, a variety of definitions and criteria for a good surrogate endpoint have been proposed, all based on or closely related to the "principal effects" or "causal effect predictiveness (CEP)" surface. We discuss CEP-based criteria for a useful surrogate endpoint, including (1) the meaning and relative importance of proposed criteria including average causal necessity (ACN), average causal sufficiency (ACS), and large clinical effect modification; (2) the relationship between these criteria and the Prentice definition of a valid surrogate endpoint; and (3) the relationship between these criteria and the consistency criterion (i.e., assurance against the "surrogate paradox"). This includes the result that ACN plus a strong version of ACS generally do not imply the Prentice definition nor the consistency criterion, but they do have these implications in special cases. Moreover, the converse does not hold except in a special case with a binary candidate surrogate. The results highlight that assumptions about the treatment effect on the clinical endpoint before the candidate surrogate is measured are influential for the ability to draw conclusions about the Prentice definition or consistency. In addition, we emphasize that in some scenarios that occur commonly in practice, the principal strata sub-populations for inference are identifiable from the observable data, in which cases the principal stratification framework has relatively high utility for the purpose of effect

Surrogate Endpoint Evaluation: Principal Stratification Criteria and the Prentice Definition

Science.gov (United States)

Gilbert, Peter B.; Gabriel, Erin E.; Huang, Ying; Chan, Ivan S.F.

2015-01-01

A common problem of interest within a randomized clinical trial is the evaluation of an inexpensive response endpoint as a valid surrogate endpoint for a clinical endpoint, where a chief purpose of a valid surrogate is to provide a way to make correct inferences on clinical treatment effects in future studies without needing to collect the clinical endpoint data. Within the principal stratification framework for addressing this problem based on data from a single randomized clinical efficacy trial, a variety of definitions and criteria for a good surrogate endpoint have been proposed, all based on or closely related to the “principal effects” or “causal effect predictiveness (CEP)” surface. We discuss CEP-based criteria for a useful surrogate endpoint, including (1) the meaning and relative importance of proposed criteria including average causal necessity (ACN), average causal sufficiency (ACS), and large clinical effect modification; (2) the relationship between these criteria and the Prentice definition of a valid surrogate endpoint; and (3) the relationship between these criteria and the consistency criterion (i.e., assurance against the “surrogate paradox”). This includes the result that ACN plus a strong version of ACS generally do not imply the Prentice definition nor the consistency criterion, but they do have these implications in special cases. Moreover, the converse does not hold except in a special case with a binary candidate surrogate. The results highlight that assumptions about the treatment effect on the clinical endpoint before the candidate surrogate is measured are influential for the ability to draw conclusions about the Prentice definition or consistency. In addition, we emphasize that in some scenarios that occur commonly in practice, the principal strata sub-populations for inference are identifiable from the observable data, in which cases the principal stratification framework has relatively high utility for the purpose of

Study on dilatation of multi-criteria evaluation method (II)

International Nuclear Information System (INIS)

Tabaru, Yasuhiko; Tomizawa, Masao; Sasaki, Shigeo

2003-01-01

In the study on FBR-cycle practical application strategy conducted by JNC, as part of development of evaluation system aiming at comparative evaluation of promising concept for FBR-cycle system, they grade the value of the concepts under the criteria evaluation such as economical efficiency and environmental load. In order that this system functions effectively in selecting promising concepts, we believe that it is important to extend the range of criteria evaluation and improve objectivity and persuasiveness of it. This is why since the last fiscal year we have been studying on evaluation methodology of and investigation examples on external economical efficiency (effects on the environment and human health, safety, energy security, nuclear non-proliferation, etc.) relevant to introduction of FBR, which had not been included in the conventional evaluation of economical efficiency. In this work, we have especially focused on the external economical efficiency relevant to energy security which is peculiar to FBR-cycle and studied on its evaluation methodology and investigation examples. Firstly, we summarized up on the concept and current situation of energy security and the position of nuclear energy in energy security. Then we identified the necessity of clarifying the importance of energy security with the middle-term point of view allowing for deficiency of fossil or uranium resources, and also the importance of the role of FBR as an improvement action for it. Secondly, we studied on the current energy economic model and examined the possibility of applying energy security for quantitative evaluation. As a result, we have concluded that the general equilibrium GTAP (Global Trade Analysis Project) in which fossil resource market around the world is modeled should be effective for quantitative evaluation of long term energy security. Finally, assuming that we will conduct the quantitative evaluation of long term energy security using GTAP model in the future, we

QUANTITATIVE EVALUATION METHOD OF ELEMENTS PRIORITY OF CARTOGRAPHIC GENERALIZATION BASED ON TAXI TRAJECTORY DATA

Directory of Open Access Journals (Sweden)

Z. Long

2017-09-01

Full Text Available Considering the lack of quantitative criteria for the selection of elements in cartographic generalization, this study divided the hotspot areas of passengers into parts at three levels, gave them different weights, and then classified the elements from the different hotspots. On this basis, a method was proposed to quantify the priority of elements selection. Subsequently, the quantitative priority of different cartographic elements was summarized based on this method. In cartographic generalization, the method can be preferred to select the significant elements and discard those that are relatively non-significant.

Preparing Tomorrow's Administrators: A Quantitative Correlation Study of the Relationship between Emotional Intelligence and Effective Leadership Practices

Science.gov (United States)

May-Vollmar, Kelly

2017-01-01

Purpose: The purpose of this quantitative correlation study was to identify whether there is a relationship between emotional intelligence and effective leadership practices, specifically with school administrators in Southern California K-12 public schools. Methods: This study was conducted using a quantitative descriptive design, correlation…

MULTIPLE CRITERIA DECISION MAKING IN STRATEGIC PLANNING OF TABLE EGG PRODUCTION

Directory of Open Access Journals (Sweden)

Ana Crnčan

2016-06-01

Full Text Available The main research objective was to analyze and evaluate different systems of table egg production by using the multiple criteria analysis, the method of Analytic Hierarchy Process (AHP in decision making within strategic planning of production. The survey involved 79 producers of table eggs registered in the Records on laying hens’ farms in the Republic of Croatia. In the first stage, the research defined the criteria and sub-criteria for system evaluation which were compared in pairs in order to determine the weight or importance for each of them. Alternatives were evaluation based on definition of priorities of examinees and the extent to which they meet each of the defined criteria and sub-criteria. Intensity of examinees’ preferences were entered into the Expert Choice software in order to evaluate ranking results of egg production systems. Defined model consisted of a quantitative criterion of economic indicators, and the other two referred to qualitative criteria, market indicators and technical-technological factors. Each criterion had its corresponding sub-criteria that were evenly distributed in numerical order. Based on individual assessments of the examinees, overall cumulative evaluation was obtained for the table egg production systems. Accordingly, the most acceptable alternative to egg production is the indoor keeping system (priority 0.301. It is followed by the free-range system of keeping laying hens (priority 0.253. The third-ranked alternative is egg production by hens kept in conventional cages (priority 0.226, while the fourth-ranked least acceptable alternative, as of the total evaluation, is the ecological system of egg production (priority 0.220. Taking into account the obtained results of multiple criteria evaluation as well as EU and world trends in changing consumers’ habits including food safety and quality as well as customers’ preferences towards local market and local products, it is recommended that eggs

Quantitative and Qualitative Evaluations of the Enhanced Logo-autobiography Program for Korean-American Women.

Science.gov (United States)

Sung, Kyung Mi; Bernstein, Kunsook

2017-12-01

This study extends Bernstein et al.'s (2016) investigation of the effects of the Enhanced Logo-autobiography Program on Korean-American women's depressive symptoms, coping strategies, purpose in life, and posttraumatic growth by analyzing quantitative and qualitative data. This study's participants significantly improved on quantitative measures of depression, coping strategies, purpose in life, and post-traumatic growth at eight weeks post-intervention and follow-up. The qualitative content analysis revealed 17 themes with five essential themes. The program's activity to promote purpose in life through posttraumatic growth facilitated participants' recovery from traumatic experiences. Standardized guidelines are needed to conduct this program in Korean community centers.

Preliminary selection criteria for the Yucca Mountain Project waste package container material

International Nuclear Information System (INIS)

Halsey, W.G.

1991-01-01

The Department of Energy's Yucca Mountain Project (YMP) is evaluating a site at Yucca Mountain in Nevada for construction of a geologic repository for the storage of high-level nuclear waste. Lawrence Livermore National Laboratory's (LLNL) Nuclear Waste Management Project (NWMP) has the responsibility for design, testing, and performance analysis of the waste packages. The design is performed in an iterative manner in three sequential phases (conceptual design, advanced conceptual design, and license application design). An important input to the start of the advanced conceptual design is the selection of the material for the waste containers. The container material is referred to as the 'metal barrier' portion of the waste package, and is the responsibility of the Metal Barrier Selection and Testing task at LLNL. The selection will consist of several steps. First, preliminary, material-independent selection criteria will be established based on the performance goals for the container. Second, a variety of engineering materials will be evaluated against these criteria in a screening process to identify candidate materials. Third, information will be obtained on the performance of the candidate materials, and final selection criteria and quantitative weighting factors will be established based on the waste package design requirements. Finally, the candidate materials will be ranked against these criteria to determine whether they meet the mandated performance requirements, and to provide a comparative score to choose the material for advanced conceptual design activities. This document sets forth the preliminary container material selection criteria to be used in screening candidate materials. 5 refs

Air Conditioner Selection with TOPSIS and VIKOR Methods In Multi Criteria Decision Making

Directory of Open Access Journals (Sweden)

İrfan ERTUĞRUL

2014-06-01

Full Text Available Technological and global changes nowadays enable air conditioning sector to gain a higher importance. Short and long term risks for comsumers, the use of air conditioningtechnology with cost minimization, the increase of product charesteristics and firms, and the variability of product features have led to the need for multi-criteria decision. Therefore, caring the multiple criteria and the alternatives, the multi-criteria decision making techniques are taken to the scope of application. The purpose of the study is to determine the factors which affect the decision of air conditioning choice and to present the preference ranking suggestion. Having the nearly have got the approximately equivalent heating and cooling capacity, air conditionings in A+ class are included in the scope of related research. In application, when choosing air conditioning products, Topsis and Vikor that are multi-criteria decision-making methods are used and the results are compared and evaluated. When choosing air conditioning products, preference plansa re presented in the application.

The rise of quantitative methods in Psychology

Directory of Open Access Journals (Sweden)

Denis Cousineau

2005-09-01

Full Text Available Quantitative methods have a long history in some scientific fields. Indeed, no one today would consider a qualitative data set in physics or a qualitative theory in chemistry. Quantitative methods are so central in these fields that they are often labelled “hard sciences”. Here, we examine the question whether psychology is ready to enter the “hard science club” like biology did in the forties. The facts that a over half of the statistical techniques used in psychology are less than 40 years old and that b the number of simulations in empirical papers has followed an exponential growth since the eighties, both suggests that the answer is yes. The purpose of Tutorials in Quantitative Methods for Psychology is to provide a concise and easy access to the currents methods.

DISPOSABLE CANISTER WASTE ACCEPTANCE CRITERIA

Energy Technology Data Exchange (ETDEWEB)

R.J. Garrett

2001-07-30

The purpose of this calculation is to provide the bases for defining the preclosure limits on radioactive material releases from radioactive waste forms to be received in disposable canisters at the Monitored Geologic Repository (MGR) at Yucca Mountain. Specifically, this calculation will provide the basis for criteria to be included in a forthcoming revision of the Waste Acceptance System Requirements Document (WASRD) that limits releases in terms of non-isotope-specific canister release dose-equivalent source terms. These criteria will be developed for the Department of Energy spent nuclear fuel (DSNF) standard canister, the Multicanister Overpack (MCO), the naval spent fuel canister, the High-Level Waste (HLW) canister, the plutonium can-in-canister, and the large Multipurpose Canister (MPC). The shippers of such canisters will be required to demonstrate that they meet these criteria before the canisters are accepted at the MGR. The Quality Assurance program is applicable to this calculation. The work reported in this document is part of the analysis of DSNF and is performed using procedure AP-3.124, Calculations. The work done for this analysis was evaluated according to procedure QAP-2-0, Control of Activities, which has been superseded by AP-2.21Q, Quality Determinations and Planning for Scientific, Engineering, and Regulatory Compliance Activities. This evaluation determined that such activities are subject to the requirements of DOE/RW/0333P, Quality Assurance Requirements and Description (DOE 2000). This work is also prepared in accordance with the development plan titled Design Basis Event Analyses on DOE SNF and Plutonium Can-In-Canister Waste Forms (CRWMS M&O 1999a) and Technical Work Plan For: Department of Energy Spent Nuclear Fuel Work Packages (CRWMS M&O 2000d). This calculation contains no electronic data applicable to any electronic data management system.

Technical criteria for the prevention of criticality

Energy Technology Data Exchange (ETDEWEB)

Tomlinson, R E

1971-04-15

Atlantic Richfield Hanford Company (ARHCO) Policy Guide 1.6.6, 'Criticality Prevention' and Operating Instruction 1.6.6.2, 'Criticality Prevention in Process Facilities', present the policy of the Chemical Processing Division with respect to the control of criticality hazards, and delegate the responsibility for specifying safe limits for the design and operation of process facilities to the Manager, Research and Development Department. The purpose of this document is to define the technical criteria to be used in developing the limits within which CPD facilities are to be designed and operated. These criteria are based on the operating experience accumulated from the processing of fissile materials since the year 1944. The mere existence of a fissile material in quantities greater than a minimum critical mass creates some finite risk that criticality will occur. This risk of criticality can be held to a very low value by imposing restrictions on the manner in which the fissile material is stored or handled. Such controls are to be imposed as needed.

Technical criteria for the prevention of criticality

International Nuclear Information System (INIS)

Tomlinson, R.E.

1971-01-01

Atlantic Richfield Hanford Company (ARHCO) Policy Guide 1.6.6, 'Criticality Prevention' and Operating Instruction 1.6.6.2, 'Criticality Prevention in Process Facilities', present the policy of the Chemical Processing Division with respect to the control of criticality hazards, and delegate the responsibility for specifying safe limits for the design and operation of process facilities to the Manager, Research and Development Department. The purpose of this document is to define the technical criteria to be used in developing the limits within which CPD facilities are to be designed and operated. These criteria are based on the operating experience accumulated from the processing of fissile materials since the year 1944. The mere existence of a fissile material in quantities greater than a minimum critical mass creates some finite risk that criticality will occur. This risk of criticality can be held to a very low value by imposing restrictions on the manner in which the fissile material is stored or handled. Such controls are to be imposed as needed

Spectral Domain Optical Coherence Tomography in Glaucoma: Qualitative and Quantitative Analysis of the Optic Nerve Head and Retinal Nerve Fiber Layer (An AOS Thesis)

Science.gov (United States)

Chen, Teresa C.

2009-01-01

Purpose: To demonstrate that video-rate spectral domain optical coherence tomography (SDOCT) can qualitatively and quantitatively evaluate optic nerve head (ONH) and retinal nerve fiber layer (RNFL) glaucomatous structural changes. To correlate quantitative SDOCT parameters with disc photography and visual fields. Methods: SDOCT images from 4 glaucoma eyes (4 patients) with varying stages of open-angle glaucoma (ie, early, moderate, late) were qualitatively contrasted with 2 age-matched normal eyes (2 patients). Of 61 other consecutive patients recruited in an institutional setting, 53 eyes (33 patients) met inclusion/exclusion criteria for quantitative studies. Images were obtained using two experimental SDOCT systems, one utilizing a superluminescent diode and the other a titanium:sapphire laser source, with axial resolutions of about 6 μm and 3 μm, respectively. Results: Classic glaucomatous ONH and RNFL structural changes were seen in SDOCT images. An SDOCT reference plane 139 μm above the retinal pigment epithelium yielded cup-disc ratios that best correlated with masked physician disc photography cup-disc ratio assessments. The minimum distance band, a novel SDOCT neuroretinal rim parameter, showed good correlation with physician cup-disc ratio assessments, visual field mean deviation, and pattern standard deviation (P values range, .0003–.024). RNFL and retinal thickness maps correlated well with disc photography and visual field testing. Conclusions: To our knowledge, this thesis presents the first comprehensive qualitative and quantitative evaluation of SDOCT images of the ONH and RNFL in glaucoma. This pilot study provides basis for developing more automated quantitative SDOCT-specific glaucoma algorithms needed for future prospective multicenter national trials. PMID:20126502

Determination of Effective Criteria for location Selection of WPC Plants from agricultural residues in Iran by AHP Technique

Directory of Open Access Journals (Sweden)

hasan alizadeh

2017-02-01

Full Text Available This study was aimed at determining the effective criteria for location selection of WPC Plants from agricultural residues in Iran. For this purpose, after review and studies papers and books, Six criteria" products and materials, regulations, technical and human, economic, infrastructure and environmental and also 30 sub-criteria were identified. The priority rates of these criteria and sub-criteria were evaluated by AHP technique. The results indicated that among 30 effective sub-criteria in location selection of the WPC plants from agricultural residues, amount of wastes supply (0.087, continuity of wastes supply, cost of wastes supply, amount of sales and export, granted facilities and less Hazards for the environment and forest had the highest priorities, which were rated as 0.071, 0.067, 0.065, 0.064 and 0.062 respectively.

Functional design criteria for an exploratory shaft facility in salt: Technical report

International Nuclear Information System (INIS)

1986-11-01

The purpose of the Functional Criteria for Design is to provide technical direction for the development of detailed design criteria for the exploratory shaft facility. This will assure that the exploratory shaft facility will be designed in accordance with the current Mission Plan as well as the Nuclear Waste Policy Act and 10 CFR Part 60, which will facilitate the licensing process. The functional criteria for design are not intended to limit or constrain the designer's flexibility. The following philosophies will be incorporated in the designs: (1) The exploratory shaft will be designed to fulfill its intended purpose which is to characterize the salt site by subsurface testing; (2) the design will minimize any adverse impact which the facility may cause to the environment and any damage to the site if it should be found suitable for a repository; (3) the health and safety of the public and of the workers will be an essential factor in the design; (4) sound engineering principles and practices will be consistently employed in the design process; (5) the exploratory shaft and related surface and subsurface facilities will be designed to be economical and reliable in construction, operation, and maintenance; and (6) the exploratory shaft facility will be designed in accordance with applicable federal, state, and local regulations, as well as all applicable national consensus codes and standards

Early Site Permit Demonstration Program: Regulatory criteria evaluation report

Energy Technology Data Exchange (ETDEWEB)

1993-03-01

The primary objective of the ESPDP is to demonstrate successfully the use of 10CFR52 to obtain ESPs for one or more US sites for one (or more) ALWR nuclear power plants. It is anticipated that preparation of the ESP application and interaction with NRC during the application review process will result not only in an ESP for the applicant(s) but also in the development of criteria and definition of processes, setting the precedent that facilitates ESPs for subsequent ESP applications. Because siting regulatory processes and acceptance criteria are contained in over 100 separate documents, comprehensive licensing and technical reviews were performed to establish whether the requirements and documentation are self-consistent, whether the acceptance criteria are sufficiently well-defined and clear, and whether the licensing process leading to the issuance of an ESP is unambiguously specified. The results of the technical and licensing evaluations are presented in this report. The purpose, background, and organization of the ESPDP is delineated in Section 1. Section 11 contains flowcharts defining siting application requirements, environmental report requirements, and emergency planning/preparedness requirements for ALWRS. The licensing and technical review results are presented in Section III.

Early Site Permit Demonstration Program: Regulatory criteria evaluation report

International Nuclear Information System (INIS)

1993-03-01

The primary objective of the ESPDP is to demonstrate successfully the use of 10CFR52 to obtain ESPs for one or more US sites for one (or more) ALWR nuclear power plants. It is anticipated that preparation of the ESP application and interaction with NRC during the application review process will result not only in an ESP for the applicant(s) but also in the development of criteria and definition of processes, setting the precedent that facilitates ESPs for subsequent ESP applications. Because siting regulatory processes and acceptance criteria are contained in over 100 separate documents, comprehensive licensing and technical reviews were performed to establish whether the requirements and documentation are self-consistent, whether the acceptance criteria are sufficiently well-defined and clear, and whether the licensing process leading to the issuance of an ESP is unambiguously specified. The results of the technical and licensing evaluations are presented in this report. The purpose, background, and organization of the ESPDP is delineated in Section 1. Section 11 contains flowcharts defining siting application requirements, environmental report requirements, and emergency planning/preparedness requirements for ALWRS. The licensing and technical review results are presented in Section III

Endorsement of DSM-IV dependence criteria among caffeine users.

Science.gov (United States)

Hughes, J R; Oliveto, A H; Liguori, A; Carpenter, J; Howard, T

1998-10-01

The purpose of this article is to determine whether some caffeine users endorse clinical indicators of dependence and abuse. We asked 162 randomly-selected caffeine users generic DSM-IV criteria for dependence, abuse, intoxication and withdrawal pertaining to their caffeine use in the last year via a structured telephone interview. The prevalence of endorsement of dependence items was 56% for strong desire or unsuccessful attempt to stop use, 50% for spending a great deal of time with the drug, 28% for using more than intended, 18% for withdrawal, 14% for using despite knowledge of harm, 8% for tolerance and 1% for foregoing activities to use. Seven percent of users met DSM-IV criteria for caffeine intoxication and, among those who had tried to stop caffeine permanently, 24% met DSM-IV research criteria for caffeine withdrawal. Test-retest interviews for dependency agreed in 29/30 cases (97%). Eight expert substance abuse clinicians agreed with self-endorsed caffeine dependence 91% of the time. Our results replicate earlier work and suggest that a substantial proportion of caffeine users exhibit dependence-like behaviors. Further studies are needed to determine whether such users exhibit a clinically significant syndrome of drug dependence.

Quantitative aspects of crystalline lactose in milk products

NARCIS (Netherlands)

Roetman, K.

1982-01-01

The occurrence of crystalline lactose in milk products and its influence on their physical properties are briefly reviewed. The importance of the quantitive determination of crystalline lactose for scientific and industrial purposes is indicated, and a summary is given of our earlier work. This

Application of Multi-Criteria Decision Making (MCDM) Technique for Gradation of Jute Fibres

Science.gov (United States)

Choudhuri, P. K.

2014-12-01

Multi-Criteria Decision Making is a branch of Operation Research (OR) having a comparatively short history of about 40 years. It is being popularly used in the field of engineering, banking, fixing policy matters etc. It can also be applied for taking decisions in daily life like selecting a car to purchase, selecting bride or groom and many others. Various MCDM methods namely Weighted Sum Model (WSM), Weighted Product Model (WPM), Analytic Hierarchy Process (AHP), Technique for Order Preference by Similarity to Ideal Solutions (TOPSIS) and Elimination and Choice Translating Reality (ELECTRE) are there to solve many decision making problems, each having its own limitations. However it is very difficult to decide which MCDM method is the best. MCDM methods are prospective quantitative approaches for solving decision problems involving finite number of alternatives and criteria. Very few research works in textiles have been carried out with the help of this technique particularly where decision taking among several alternatives becomes the major problem based on some criteria which are conflicting in nature. Gradation of jute fibres on the basis of the criteria like strength, root content, defects, colour, density, fineness etc. is an important task to perform. The MCDM technique provides enough scope to be applied for the gradation of jute fibres or ranking among several varieties keeping in view a particular object and on the basis of some selection criteria and their relative weightage. The present paper is an attempt to explore the scope of applying the multiplicative AHP method of multi-criteria decision making technique to determine the quality values of selected jute fibres on the basis of some above stated important criteria and ranking them accordingly. A good agreement in ranking is observed between the existing Bureau of Indian Standards (BIS) grading and proposed method.

Repository operational criteria analysis

International Nuclear Information System (INIS)

Hageman, J.P.; Chowdhury, A.H.

1992-08-01

The objective of the ''Repository Operational Criteria (ROC) Feasibility Studies'' (or ROC task) was to conduct comprehensive and integrated analyses of repository design, construction, and operations criteria in 10 CFR Part 60 regulations, considering the interfaces and impacts of any potential changes to those regulations. The study addresses regulatory criteria related to the preclosure aspects of the geologic repository. The study task developed regulatory concepts or potential repository operational criteria (PROC) based on analysis of a repository's safety functions and other regulations for similar facilities. These regulatory concepts or PROC were used as a basis to assess the sufficiency and adequacy of the current criteria in 10 CFR Part 60. Where the regulatory concepts were same as current operational criteria, these criteria were referenced. The operations criteria referenced or the PROC developed are given in this report. Detailed analyses used to develop the regulatory concepts and any necessary PROC for those regulations that may require a minor change are also presented. The results of the ROC task showed a need for further analysis and possible major rule change related to the design bases of a geologic repository operations area, siting, and radiological emergency planning

Qualitative versus quantitative assessment of cerebrovascular reserve capacity

International Nuclear Information System (INIS)

Okuguchi, Taku

2000-01-01

Quantitative studies of cerebral blood flow (CBF) combined with a acetazolamide (ACZ) challenge have defined a subgroup of patients with symptomatic carotid or middle cerebral artery (MCA) occlusive diseases who are at an increased risk for stroke. Recent reports suggest that qualitative CBF techniques could also define the same high-risk subgroup. To evaluate the accuracy of the qualitative method, we compared qualitative ratios with quantitative CBF data, obtained using iodine-123-N-isopropyl-p-iodoamphetamine (IMP) single-photon emission computed tomography (SPECT). We analyzed qualitative and quantitative IMP SPECT images for 50 patients with symptomatic carotid or middle cerebral artery occlusive diseases. Quantitative CBF data were measured by the autoradiographic technique. One region-of-interest within each hemisphere was within the MCA territory. Relative cerebrovascular reserve capacity (CVRC) obtained using qualitative images before and after the intravenous administration of 1 g of ACZ was defined as follows: ( ACZ C occl / ACZ C non )/( baseline C occl / baseline C non ). The threshold for abnormal relative CVRC was defined as less than 1.0. Quantitative CBF was considered abnormal when the response to ACZ (percent change) on the symptomatic side (absolute CVRC) was a decrease of more than 10%. Of 39 patients whose relative CVRC were considered abnormal, 29 (74%) were normal in absolute CVRC (i.e., false positive). Two of 12 (17%) who were not considered compromised by qualitative criteria had abnormal absolute CVRC (i.e., false negative). This study demonstrates that this important subgroup cannot be accurately defined with qualitative methodology. (author)

Qualitative versus quantitative assessment of cerebrovascular reserve capacity

Energy Technology Data Exchange (ETDEWEB)

Okuguchi, Taku [Iwate Medical Univ., Morioka (Japan). School of Medicine

2000-06-01

Quantitative studies of cerebral blood flow (CBF) combined with a acetazolamide (ACZ) challenge have defined a subgroup of patients with symptomatic carotid or middle cerebral artery (MCA) occlusive diseases who are at an increased risk for stroke. Recent reports suggest that qualitative CBF techniques could also define the same high-risk subgroup. To evaluate the accuracy of the qualitative method, we compared qualitative ratios with quantitative CBF data, obtained using iodine-123-N-isopropyl-p-iodoamphetamine (IMP) single-photon emission computed tomography (SPECT). We analyzed qualitative and quantitative IMP SPECT images for 50 patients with symptomatic carotid or middle cerebral artery occlusive diseases. Quantitative CBF data were measured by the autoradiographic technique. One region-of-interest within each hemisphere was within the MCA territory. Relative cerebrovascular reserve capacity (CVRC) obtained using qualitative images before and after the intravenous administration of 1 g of ACZ was defined as follows: ({sub ACZ}C{sub occl}/{sub ACZ}C{sub non})/({sub baseline}C{sub occl}/{sub baseline}C{sub n}= {sub on}). The threshold for abnormal relative CVRC was defined as less than 1.0. Quantitative CBF was considered abnormal when the response to ACZ (percent change) on the symptomatic side (absolute CVRC) was a decrease of more than 10%. Of 39 patients whose relative CVRC were considered abnormal, 29 (74%) were normal in absolute CVRC (i.e., false positive). Two of 12 (17%) who were not considered compromised by qualitative criteria had abnormal absolute CVRC (i.e., false negative). This study demonstrates that this important subgroup cannot be accurately defined with qualitative methodology. (author)

Assessment of hydrogen fuel cell applications using fuzzy multiple-criteria decision making method

International Nuclear Information System (INIS)

Chang, Pao-Long; Hsu, Chiung-Wen; Lin, Chiu-Yue

2012-01-01

Highlights: ► This study uses the fuzzy MCDM method to assess hydrogen fuel cell applications. ► We evaluate seven different hydrogen fuel cell applications based on 14 criteria. ► Results show that fuel cell backup power systems should be chosen for development in Taiwan. -- Abstract: Assessment is an essential process in framing government policy. It is critical to select the appropriate targets to meet the needs of national development. This study aimed to develop an assessment model for evaluating hydrogen fuel cell applications and thus provide a screening tool for decision makers. This model operates by selecting evaluation criteria, determining criteria weights, and assessing the performance of hydrogen fuel cell applications for each criterion. The fuzzy multiple-criteria decision making method was used to select the criteria and the preferred hydrogen fuel cell products based on information collected from a group of experts. Survey questionnaires were distributed to collect opinions from experts in different fields. After the survey, the criteria weights and a ranking of alternatives were obtained. The study first defined the evaluation criteria in terms of the stakeholders, so that comprehensive influence criteria could be identified. These criteria were then classified as environmental, technological, economic, or social to indicate the purpose of each criterion in the assessment process. The selected criteria included 14 indicators, such as energy efficiency and CO 2 emissions, as well as seven hydrogen fuel cell applications, such as forklifts and backup power systems. The results show that fuel cell backup power systems rank the highest, followed by household fuel cell electric-heat composite systems. The model provides a screening tool for decision makers to select hydrogen-related applications.

Home blood pressure monitoring and self-titration of antihypertensive medications: Proposed patient selection criteria.

Science.gov (United States)

Hill, James R

2016-05-01

Recent studies have demonstrated that home blood pressure monitoring (HBPM), coupled with self-titration of medications is a viable intervention to control hypertension. There are currently no established criteria to evaluate patients for inclusion in such a program. The purpose of this discussion is to propose criteria for determining if a patient is appropriate to participate in a program of HBPM and self-titration. Inclusion criteria for two self-titration trials were examined, and additional factors in clinical practice were identified and discussed. Additional selection criteria were proposed to support the decision to enroll a patient in an antihypertensive self-titration program. Inclusion criteria from self-titration trials provide a reasonable starting point for choosing appropriate patients in clinical practice, but additional research is necessary. Adaptation of these criteria and consideration of the identified factors can be used to develop decision support instruments. Such instruments should be evaluated for effectiveness and reliability prior to use in clinical practice. HBPM combined with self-titration is an effective patient-centered approach for hypertension management. Decision support instruments to determine appropriate patients are necessary for safe and effective use in clinical practice. ©2015 American Association of Nurse Practitioners.

Multi-criteria assessment tool for sustainability appraisal of remediation alternatives for a contaminated site

DEFF Research Database (Denmark)

Søndergaard, Gitte Lemming; Binning, Philip John; Bondgård, Morten

2017-01-01

Purpose: In order to improve and support decision-making for the selection of remedial techniques for contaminated sites, a multi-criteria assessment (MCA) method has been developed. The MCA framework is structured in a decision process actively involving stakeholders, and compares...

QUALITATIVE AND QUANTITATIVE METHODS OF SUICIDE RESEARCH IN OLD AGE

OpenAIRE

Ojagbemi, A.

2017-01-01

This paper examines the merits of the qualitative and quantitative methods of suicide research in the elderly using two studies identified through a free search of the Pubmed database for articles that might have direct bearing on suicidality in the elderly. The studies have been purposively selected for critical appraisal because they meaningfully reflect the quantitative and qualitative divide as well as the social, economic, and cultural boundaries between the elderly living in sub-Saharan...

Phase analysis in duplex stainless steel: comparison of EBSD and quantitative metallography methods

International Nuclear Information System (INIS)

Michalska, J; Chmiela, B

2014-01-01

The purpose of the research was to work out the qualitative and quantitative analysis of phases in DSS in as-received state and after thermal aging. For quantitative purposes, SEM observations, EDS analyses and electron backscattered diffraction (EBSD) methods were employed. Qualitative analysis of phases was performed by two methods: EBSD and classical quantitative metallography. A juxtaposition of different etchants for the revealing of microstructure and brief review of sample preparation methods for EBSD studies were presented. Different ways of sample preparation were tested and based on these results a detailed methodology of DSS phase analysis was developed including: surface finishing, selective etching methods and image acquisition. The advantages and disadvantages of applied methods were pointed out and compared the accuracy of the analysis phase performed by both methods

UK quantitative WB-DWI technical workgroup: consensus meeting recommendations on optimisation, quality control, processing and analysis of quantitative whole-body diffusion-weighted imaging for cancer.

Science.gov (United States)

Barnes, Anna; Alonzi, Roberto; Blackledge, Matthew; Charles-Edwards, Geoff; Collins, David J; Cook, Gary; Coutts, Glynn; Goh, Vicky; Graves, Martin; Kelly, Charles; Koh, Dow-Mu; McCallum, Hazel; Miquel, Marc E; O'Connor, James; Padhani, Anwar; Pearson, Rachel; Priest, Andrew; Rockall, Andrea; Stirling, James; Taylor, Stuart; Tunariu, Nina; van der Meulen, Jan; Walls, Darren; Winfield, Jessica; Punwani, Shonit

2018-01-01

Application of whole body diffusion-weighted MRI (WB-DWI) for oncology are rapidly increasing within both research and routine clinical domains. However, WB-DWI as a quantitative imaging biomarker (QIB) has significantly slower adoption. To date, challenges relating to accuracy and reproducibility, essential criteria for a good QIB, have limited widespread clinical translation. In recognition, a UK workgroup was established in 2016 to provide technical consensus guidelines (to maximise accuracy and reproducibility of WB-MRI QIBs) and accelerate the clinical translation of quantitative WB-DWI applications for oncology. A panel of experts convened from cancer centres around the UK with subspecialty expertise in quantitative imaging and/or the use of WB-MRI with DWI. A formal consensus method was used to obtain consensus agreement regarding best practice. Questions were asked about the appropriateness or otherwise on scanner hardware and software, sequence optimisation, acquisition protocols, reporting, and ongoing quality control programs to monitor precision and accuracy and agreement on quality control. The consensus panel was able to reach consensus on 73% (255/351) items and based on consensus areas made recommendations to maximise accuracy and reproducibly of quantitative WB-DWI studies performed at 1.5T. The panel were unable to reach consensus on the majority of items related to quantitative WB-DWI performed at 3T. This UK Quantitative WB-DWI Technical Workgroup consensus provides guidance on maximising accuracy and reproducibly of quantitative WB-DWI for oncology. The consensus guidance can be used by researchers and clinicians to harmonise WB-DWI protocols which will accelerate clinical translation of WB-DWI-derived QIBs.

Measurement parameter selection for quantitative isotope dilution gas chromatography/mass spectrometry

International Nuclear Information System (INIS)

Colby, B.N.; Rosecrance, A.E.; Colby, M.E.

1981-01-01

By use of the two-isotope model of isotope dilution, selection criteria were developed for identifying optimum m/z's for quantitation of compounds by gas chromatography/mass spectrometry. In addition, it was possible to predict the optimum ratio of naturally abundant to labeled compound and to identify appropriate data reduction methods. The validity of these predictions was confirmed by using experimental GC/MS data for several organic compounds

Multi-criteria model for sustainable development using goal programming applied to the United Arab Emirates

International Nuclear Information System (INIS)

Jayaraman, Raja; Colapinto, Cinzia; Torre, Davide La; Malik, Tufail

2015-01-01

Sustainable development requires implementing suitable policies integrating several competing objectives on economic, environmental, energy and social criteria. Multi-Criteria Decision Analysis (MCDA) using goal programming is a popular and widely used technique to study decision problems in the face of multiple conflicting objectives. MCDA assists policy makers by providing clarity in choosing between alternatives for strategic planning and investments. In this paper, we propose a weighted goal programming model that integrates efficient allocation of resources to simultaneously achieve sustainability related goals on GDP growth, electricity consumption and GHG emissions. We validate the model with application to key economic sectors of the United Arab Emirates to achieve sustainable development goals by the year 2030. The model solution provides a quantitative justification and a basis for comparison in planning future energy requirements and an indispensable requirement to include renewable sources to satisfy long-term energy requirements. - Highlights: • Multi-criteria model for achieving sustainability goals by year 2030. • Integrates criteria on electricity, GDP, GHG emissions for optimal labor allocation. • Future electricity demand requires contribution from renewable sources • Enables planning for long term investments towards energy sustainability.

Criteria of benchmark selection for efficient flexible multibody system formalisms

Directory of Open Access Journals (Sweden)

Valášek M.

2007-10-01

Full Text Available The paper deals with the selection process of benchmarks for testing and comparing efficient flexible multibody formalisms. The existing benchmarks are briefly summarized. The purposes for benchmark selection are investigated. The result of this analysis is the formulation of the criteria of benchmark selection for flexible multibody formalisms. Based on them the initial set of suitable benchmarks is described. Besides that the evaluation measures are revised and extended.

Criteria for onset of firestorms

International Nuclear Information System (INIS)

Carrier, G.F.; Fendell, F.E.; Feldman, P.S.

1983-01-01

Quantitative criteria are evolved for onset of firestorms, severe stationary (nonpropagating) holocausts arising via merger of fires from multiple simultaneous ignitions in a heavily fuel-laden urban environment. Within an hour, surface-level radial inflow from all directions sustains a large-diameter convective column that eventually reaches altitude of about 10 km (e.g., Hamburg, Dresden, Hiroshima). As the firestorm achieves peak intensity (2 to 3 hours after the ignitions), inflow speeds are inferred to attain 25 to 50 m/s; typically 12 km 2 are reduced to ashes, before winds relax to ambient levels in six-to-nine hours. Here the firestorm is interpreted to be a mesocyclone (rotating severe local storm). Even with exceedingly large heat release sustained over a concentrated area, in the presence of a very nearly autoconvectively unstable atmospheric stratification, onset of vigorous swirling on the scale of two hours requires more than concentration of circulation associated with the rotation of the earth; rather, a preexisting, if weak, circulation appears necessary for firestorm cyclogenesis

Lean Information Management: Criteria For Selecting Key Performance Indicators At Shop Floor

Science.gov (United States)

Iuga, Maria Virginia; Kifor, Claudiu Vasile; Rosca, Liviu-Ion

2015-07-01

Most successful organizations worldwide use key performance indicators as an important part of their corporate strategy in order to forecast, measure and plan their businesses. Performance metrics vary in their purpose, definition and content. Therefore, the way organizations select what they think are the optimal indicators for their businesses varies from company to company, sometimes even from department to department. This study aims to answer the question of what is the most suitable way to define and select key performance indicators. More than that, it identifies the right criteria to select key performance indicators at shop floor level. This paper contributes to prior research by analysing and comparing previously researched selection criteria and proposes an original six-criteria-model, which caters towards choosing the most adequate KPIs. Furthermore, the authors take the research a step further by further steps to closed research gaps within this field of study.

Siting a municipal solid waste disposal facility, part II: the effects of external criteria on the final decision.

Science.gov (United States)

Korucu, M Kemal; Karademir, Aykan

2014-02-01

The procedure of a multi-criteria decision analysis supported by the geographic information systems was applied to the site selection process of a planning municipal solid waste management practice based on twelve different scenarios. The scenarios included two different decision tree modes and two different weighting models for three different area requirements. The suitability rankings of the suitable sites obtained from the application of the decision procedure for the scenarios were assessed by a factorial experimental design concerning the effect of some external criteria on the final decision of the site selection process. The external criteria used in the factorial experimental design were defined as "Risk perception and approval of stakeholders" and "Visibility". The effects of the presence of these criteria in the decision trees were evaluated in detail. For a quantitative expression of the differentiations observed in the suitability rankings, the ranking data were subjected to ANOVA test after a normalization process. Then the results of these tests were evaluated by Tukey test to measure the effects of external criteria on the final decision. The results of Tukey tests indicated that the involvement of the external criteria into the decision trees produced statistically meaningful differentiations in the suitability rankings. Since the external criteria could cause considerable external costs during the operation of the disposal facilities, the presence of these criteria in the decision tree in addition to the other criteria related to environmental and legislative requisites could prevent subsequent external costs in the first place.

Quantitative studies of antimicrobial peptide-lipid membrane interactions

DEFF Research Database (Denmark)

Kristensen, Kasper

antimicrobial peptides interact with phospholipid membranes. Motivated by that fact, the scope of this thesis is to study these antimicrobial peptide-lipid membrane interactions. In particular, we attempt to study these interactions with a quantitative approach. For that purpose, we consider the three...... a significant problem for quantitative studies of antimicrobial peptide-lipid membrane interactions; namely that antimicrobial peptides adsorb to surfaces of glass and plastic. Specifically, we demonstrate that under standard experimental conditions, this effect is significant for mastoparan X, melittin...... lead to inaccurate conclusions, or even completely wrong conclusions, when interpreting the FCS data. We show that, if all of the pitfalls are avoided, then FCS is a technique with a large potential for quantitative studies of antimicrobial peptide-induced leakage of fluorescent markers from large...

Purposeful Sampling for Qualitative Data Collection and Analysis in Mixed Method Implementation Research.

Science.gov (United States)

Palinkas, Lawrence A; Horwitz, Sarah M; Green, Carla A; Wisdom, Jennifer P; Duan, Naihua; Hoagwood, Kimberly

2015-09-01

Purposeful sampling is widely used in qualitative research for the identification and selection of information-rich cases related to the phenomenon of interest. Although there are several different purposeful sampling strategies, criterion sampling appears to be used most commonly in implementation research. However, combining sampling strategies may be more appropriate to the aims of implementation research and more consistent with recent developments in quantitative methods. This paper reviews the principles and practice of purposeful sampling in implementation research, summarizes types and categories of purposeful sampling strategies and provides a set of recommendations for use of single strategy or multistage strategy designs, particularly for state implementation research.

Purposeful sampling for qualitative data collection and analysis in mixed method implementation research

Science.gov (United States)

Palinkas, Lawrence A.; Horwitz, Sarah M.; Green, Carla A.; Wisdom, Jennifer P.; Duan, Naihua; Hoagwood, Kimberly

2013-01-01

Purposeful sampling is widely used in qualitative research for the identification and selection of information-rich cases related to the phenomenon of interest. Although there are several different purposeful sampling strategies, criterion sampling appears to be used most commonly in implementation research. However, combining sampling strategies may be more appropriate to the aims of implementation research and more consistent with recent developments in quantitative methods. This paper reviews the principles and practice of purposeful sampling in implementation research, summarizes types and categories of purposeful sampling strategies and provides a set of recommendations for use of single strategy or multistage strategy designs, particularly for state implementation research. PMID:24193818

Optimum size determination of nuclear dual-purpose desalination plants

International Nuclear Information System (INIS)

Gaussens, J.

1966-01-01

The economics of dual-purpose desalination plants is presented from a general standpoint. The concept of demand curves for water and electricity is introduced, which leads to a rational sharing of production costs between both commodities within the framework of a market. The purpose of the study, which is based upon the principles of classical economics, is to develop objective criteria for the design of desalination plants and to derive from these a normative method for pricing both joint products, water and electricity, following as much as possible the structure of the demand. Such criteria are in particular either the maximization of benefit for the operator or the maximum welfare for the community. They involve either equality between marginal costs and revenues, or equality between marginal costs and marginal satisfactions (theory of surplus). As the size of the plant is often the predominant factor in selecting the process to be used, it follows from the above considerations that this selection is closely related to: (a) The shape of the demand curve for water; (b) The economic criterion selected and the relevant constraints (public or private ownership, limitation of the investments, etc). This makes market surveys and a rather refined economic analysis indispensable before any decision is taken on the desalination technique to be adopted. (author). Abstract only

A quantitative method for evaluating alternatives. [aid to decision making

Science.gov (United States)

Forthofer, M. J.

1981-01-01

When faced with choosing between alternatives, people tend to use a number of criteria (often subjective, rather than objective) to decide which is the best alternative for them given their unique situation. The subjectivity inherent in the decision-making process can be reduced by the definition and use of a quantitative method for evaluating alternatives. This type of method can help decision makers achieve degree of uniformity and completeness in the evaluation process, as well as an increased sensitivity to the factors involved. Additional side-effects are better documentation and visibility of the rationale behind the resulting decisions. General guidelines for defining a quantitative method are presented and a particular method (called 'hierarchical weighted average') is defined and applied to the evaluation of design alternatives for a hypothetical computer system capability.

A method for normalizing pathology images to improve feature extraction for quantitative pathology

International Nuclear Information System (INIS)

Tam, Allison; Barker, Jocelyn; Rubin, Daniel

2016-01-01

Purpose: With the advent of digital slide scanning technologies and the potential proliferation of large repositories of digital pathology images, many research studies can leverage these data for biomedical discovery and to develop clinical applications. However, quantitative analysis of digital pathology images is impeded by batch effects generated by varied staining protocols and staining conditions of pathological slides. Methods: To overcome this problem, this paper proposes a novel, fully automated stain normalization method to reduce batch effects and thus aid research in digital pathology applications. Their method, intensity centering and histogram equalization (ICHE), normalizes a diverse set of pathology images by first scaling the centroids of the intensity histograms to a common point and then applying a modified version of contrast-limited adaptive histogram equalization. Normalization was performed on two datasets of digitized hematoxylin and eosin (H&E) slides of different tissue slices from the same lung tumor, and one immunohistochemistry dataset of digitized slides created by restaining one of the H&E datasets. Results: The ICHE method was evaluated based on image intensity values, quantitative features, and the effect on downstream applications, such as a computer aided diagnosis. For comparison, three methods from the literature were reimplemented and evaluated using the same criteria. The authors found that ICHE not only improved performance compared with un-normalized images, but in most cases showed improvement compared with previous methods for correcting batch effects in the literature. Conclusions: ICHE may be a useful preprocessing step a digital pathology image processing pipeline

A method for normalizing pathology images to improve feature extraction for quantitative pathology

Energy Technology Data Exchange (ETDEWEB)

Tam, Allison [Stanford Institutes of Medical Research Program, Stanford University School of Medicine, Stanford, California 94305 (United States); Barker, Jocelyn [Department of Radiology, Stanford University School of Medicine, Stanford, California 94305 (United States); Rubin, Daniel [Department of Radiology, Stanford University School of Medicine, Stanford, California 94305 and Department of Medicine (Biomedical Informatics Research), Stanford University School of Medicine, Stanford, California 94305 (United States)

2016-01-15

Purpose: With the advent of digital slide scanning technologies and the potential proliferation of large repositories of digital pathology images, many research studies can leverage these data for biomedical discovery and to develop clinical applications. However, quantitative analysis of digital pathology images is impeded by batch effects generated by varied staining protocols and staining conditions of pathological slides. Methods: To overcome this problem, this paper proposes a novel, fully automated stain normalization method to reduce batch effects and thus aid research in digital pathology applications. Their method, intensity centering and histogram equalization (ICHE), normalizes a diverse set of pathology images by first scaling the centroids of the intensity histograms to a common point and then applying a modified version of contrast-limited adaptive histogram equalization. Normalization was performed on two datasets of digitized hematoxylin and eosin (H&E) slides of different tissue slices from the same lung tumor, and one immunohistochemistry dataset of digitized slides created by restaining one of the H&E datasets. Results: The ICHE method was evaluated based on image intensity values, quantitative features, and the effect on downstream applications, such as a computer aided diagnosis. For comparison, three methods from the literature were reimplemented and evaluated using the same criteria. The authors found that ICHE not only improved performance compared with un-normalized images, but in most cases showed improvement compared with previous methods for correcting batch effects in the literature. Conclusions: ICHE may be a useful preprocessing step a digital pathology image processing pipeline.

Cytoarchitectonic and quantitative Golgi study of the hedgehog supraoptic nucleus.

OpenAIRE

Caminero, A A; Machín, C; Sanchez-Toscano, F

1992-01-01

A cytoarchitectural study was made of the supraoptic nucleus (SON) of the hedgehog with special attention to the quantitative comparison of its main neuronal types. The main purposes were (1) to relate the characteristics of this nucleus in the hedgehog (a primitive mammalian insectivorous brain) with those in the SONs of more evolutionarily advanced species; (2) to identify quantitatively the dendritic fields of the main neuronal types in the hedgehog SON and to study their synaptic connecti...

Assessment of Different Metal Screw Joint Parameters by Using Multiple Criteria Analysis Methods

Directory of Open Access Journals (Sweden)

Audrius Čereška

2018-05-01

Full Text Available This study compares screw joints made of different materials, including screws of different diameters. For that purpose, 8, 10, 12, 14, 16 mm diameter steel screws and various parts made of aluminum (Al, steel (Stl, bronze (Brz, cast iron (CI, copper (Cu and brass (Br are considered. Multiple criteria decision making (MCDM methods such as evaluation based on distance from average solution (EDAS, simple additive weighting (SAW, technique for order of preference by similarity to ideal solution (TOPSIS and complex proportional assessment (COPRAS are utilized to assess reliability of screw joints also considering cost issues. The entropy, criterion impact loss (CILOS and integrated determination of objective criteria weights (IDOCRIW methods are utilized to assess weights of decision criteria and find the best design alternative. Numerical results confirm the validity of the proposed approach.

The design in the quali-quantitative research in the production engineering – epistemological issues

Directory of Open Access Journals (Sweden)

Leonardo Ensslin

2008-07-01

Full Text Available The present paper intends to present a proposition of design for qualitative research applied to production engineering which contemplates material and formal elements in the investigative process, concentrating the discussion on the epistemological basis of the scientific development in the internal and external criteria of validity of the qualitative research and in the formation of the researcher as a primary and strategic element of the production process of critical and valid knowledge in this area of knowledge. Firstly the controversy between Popper and Kuhn in relation to the scientism and scientific method is presented and then later presenting the construct of the authors about this. Then the qualitative and quantitative methods are characterized, justifying the need of the predominance of the qualitative approach in some areas of production engineering. The third section is about the research project, its characteristics, its formal and material elements, and the use of internal and external validation criteria in a disciplined way, the use of the qualitative research and the formation of the researcher. Key-words: Soft Operational Research; Quali-quantitative Research, Epistemology.

Criteria CSR

OpenAIRE

Vovk, V.; Zateyshikova, O.

2014-01-01

In the article the theoretical aspects regarding criteria for assessing CSR proposed by A. Carroll, including: economic, legal, ethical, philanthropic. Based on this, it is proposed to characterize these criteria with respect to the interested parties (stakeholders), including: investors, shareholders suppliers, customers, employees, society and the state. This will make a qualitative assessment of the presence and depth using social responsibility in the company, as well as determine the ext...

Quantitative map interpretation in regional planning surveys. | J.A. ...

African Journals Online (AJOL)

A procedure followed for the quantitative interpretation of maps compiled for regional planning purposes of the Upper Orange catchment-basin is presented. The analyses provided useful figures concerning the distribution of dominant vegetation components and their association with relevant habitat factors. Keywords: ...

Can quantitative sensory testing predict responses to analgesic treatment?

Science.gov (United States)

Grosen, K; Fischer, I W D; Olesen, A E; Drewes, A M

2013-10-01

The role of quantitative sensory testing (QST) in prediction of analgesic effect in humans is scarcely investigated. This updated review assesses the effectiveness in predicting analgesic effects in healthy volunteers, surgical patients and patients with chronic pain. A systematic review of English written, peer-reviewed articles was conducted using PubMed and Embase (1980-2013). Additional studies were identified by chain searching. Search terms included 'quantitative sensory testing', 'sensory testing' and 'analgesics'. Studies on the relationship between QST and response to analgesic treatment in human adults were included. Appraisal of the methodological quality of the included studies was based on evaluative criteria for prognostic studies. Fourteen studies (including 720 individuals) met the inclusion criteria. Significant correlations were observed between responses to analgesics and several QST parameters including (1) heat pain threshold in experimental human pain, (2) electrical and heat pain thresholds, pressure pain tolerance and suprathreshold heat pain in surgical patients, and (3) electrical and heat pain threshold and conditioned pain modulation in patients with chronic pain. Heterogeneity among studies was observed especially with regard to application of QST and type and use of analgesics. Although promising, the current evidence is not sufficiently robust to recommend the use of any specific QST parameter in predicting analgesic response. Future studies should focus on a range of different experimental pain modalities rather than a single static pain stimulation paradigm. © 2013 European Federation of International Association for the Study of Pain Chapters.

Quantitative analysis of untreated bio-samples

International Nuclear Information System (INIS)

Sera, K.; Futatsugawa, S.; Matsuda, K.

1999-01-01

A standard-free method of quantitative analysis for untreated samples has been developed. For hair samples, measurements were performed by irradiating with a proton beam a few hairs as they are, and quantitative analysis was carried out by means of a standard-free method developed by ourselves. First, quantitative values of concentration of zinc were derived, then concentration of other elements was obtained by regarding zinc as an internal standard. As the result, values of concentration of sulphur for 40 samples agree well with the average value for a typical Japanese and also with each other within 20%, and validity of the present method could be confirmed. Accuracy was confirmed by comparing the results with those obtained by the usual internal standard method, too. For the purpose of a surface analysis of a bone sample, a very small incidence angle of the proton beam was used, so that both energy loss of the projectile and self-absorption of X-rays become negligible. As the result, consistent values of concentration for many elements were obtained by the standard-free method

Green Supplier Selection Criteria

DEFF Research Database (Denmark)

Nielsen, Izabela Ewa; Banaeian, Narges; Golinska, Paulina

2014-01-01

Green supplier selection (GSS) criteria arise from an organization inclination to respond to any existing trends in environmental issues related to business management and processes, so GSS is integrating environmental thinking into conventional supplier selection. This research is designed...... to determine prevalent general and environmental supplier selection criteria and develop a framework which can help decision makers to determine and prioritize suitable green supplier selection criteria (general and environmental). In this research we considered several parameters (evaluation objectives......) to establish suitable criteria for GSS such as their production type, requirements, policy and objectives instead of applying common criteria. At first a comprehensive and deep review on prevalent and green supplier selection literatures performed. Then several evaluation objectives defined to assess the green...

Meeting report: knowledge and gaps in developing microbial criteria for inland recreational waters

Science.gov (United States)

Dorevitch, Samuel; Ashbolt, Nicholas J.; Ferguson, Christobel M.; Fujioka, Roger; McGee, Charles D.; Soller, Jeffrey A.; Whitman, Richard L.

2010-01-01

The U.S. Environmental Protection Agency (EPA) has committed to issuing in 2012 new or revised criteria designed to protect the health of those who use surface waters for recreation. For this purpose, the U.S. EPA has been conducting epidemiologic studies to establish relationships between microbial measures of water quality and adverse health outcomes among swimmers. New methods for testing water quality that would provide same-day results will likely be elements of the new criteria. Although the epidemiologic studies upon which the criteria will be based were conducted at Great Lakes and marine beaches, the new water quality criteria may be extended to inland waters (IWs). Similarities and important differences between coastal waters (CWs) and IWs that should be considered when developing criteria for IWs were the focus of an expert workshop. Here, we summarize the state of knowledge and research needed to base IWs microbial criteria on sound science. Two key differences between CWs and IWs are the sources of indicator bacteria, which may modify the relationship between indicator microbes and health risk, and the relationship between indicators and pathogens, which also may vary within IWs. Monitoring using rapid molecular methods will require the standardization and simplification of analytical methods, as well as greater clarity about their interpretation. Research needs for the short term and longer term are described.

Quantitative Measurement of Physical Activity in Acute Ischemic Stroke and Transient Ischemic Attack

DEFF Research Database (Denmark)

Strømmen, Anna Maria; Christensen, Thomas; Jensen, Kai

2014-01-01

BACKGROUND AND PURPOSE: The purpose of this study was to quantitatively measure and describe the amount and pattern of physical activity in patients within the first week after acute ischemic stroke and transient ischemic attack using accelerometers. METHODS: A total of 100 patients with acute is...

A GIS-based extended fuzzy multi-criteria evaluation for landslide susceptibility mapping.

Science.gov (United States)

Feizizadeh, Bakhtiar; Shadman Roodposhti, Majid; Jankowski, Piotr; Blaschke, Thomas

2014-12-01

Landslide susceptibility mapping (LSM) is making increasing use of GIS-based spatial analysis in combination with multi-criteria evaluation (MCE) methods. We have developed a new multi-criteria decision analysis (MCDA) method for LSM and applied it to the Izeh River basin in south-western Iran. Our method is based on fuzzy membership functions (FMFs) derived from GIS analysis. It makes use of nine causal landslide factors identified by local landslide experts. Fuzzy set theory was first integrated with an analytical hierarchy process (AHP) in order to use pairwise comparisons to compare LSM criteria for ranking purposes. FMFs were then applied in order to determine the criteria weights to be used in the development of a landslide susceptibility map. Finally, a landslide inventory database was used to validate the LSM map by comparing it with known landslides within the study area. Results indicated that the integration of fuzzy set theory with AHP produced significantly improved accuracies and a high level of reliability in the resulting landslide susceptibility map. Approximately 53% of known landslides within our study area fell within zones classified as having "very high susceptibility", with the further 31% falling into zones classified as having "high susceptibility".

Application of harmonic analysis in quantitative heart scintigraphy

International Nuclear Information System (INIS)

Fischer, P.; Knopp, R.; Breuel, H.P.

1979-01-01

Quantitative scintigraphy of the heart after equilibrium distribution of a radioactive tracer permits the measurement of time activity curves in the left ventricle during a representative heart cycle with great statistical accuracy. By application of Fourier's analysis, criteria are to be attained in addition for evaluation of the volume curve as a whole. Thus the entire information contained in the volume curve is completely described in a Fourier spectrum. Resynthesis after Fourier transformation seems to be an ideal method of smoothing because of its convergence in the minimum quadratic error for the type of function concerned. (orig./MG) [de

APPLICATION OF AHP METHOD IN THE IDENTIFICATION AND CLASSIFICATION OF PROJECT SELECTION CRITERIA: AN ENERGY SECTOR CASE STUDY

Directory of Open Access Journals (Sweden)

Silvério, Adriano Augusto

2015-07-01

Full Text Available Choosing from several alternative investment projects in hydropower to build a portfolio of projects is a complex matter. The most commonly used selection model for building the portfolio is the financial method, however it constraints options investments to the economic and financial parameters, which are limiting in nature. Alternatively, this paper proposes the use of multicriterial method Analytic Hierarchy Process – AHP, which incorporates measures to evaluate both quantitative and qualitative data. This method is based on criteria or parameters of operational processes that hinder or facilitate the execution of projects. In order to get the definition of the set of criteria, the Delphi technique was applied to a group of seven experts in managing hydropower projects. Main results show that essential criteria for selection of project investment portfolio, are not limited to financial aspects, but it involves criteria of bureaucratic, organizational, and political environment and technological characters. The conclusion is that the financial potential of hydropower projects are not the only determinants for investments on hydropower projects and, at large, these project are conditioned to other criteria such as, those of bureaucratic and technological nature.

Combining the IADPSG criteria with the WHO diagnostic criteria for ...

African Journals Online (AJOL)

The International Association of Diabetes in Pregnancy Study Group (IADPSG) and World Health ... Macrosomia or at least one adverse outcome were more likely in GDM patients who ... criteria for GDM in the ADA's more recent position statement.[18] .... at risk for postpartum type 2 DM;[27] the IADPSG criteria on the other ...

Reporting and evaluation criteria as means towards a transparent use of ecotoxicity data for environmental risk assessment of pharmaceuticals

International Nuclear Information System (INIS)

Agerstrand, M.; Kuester, A.; Bachmann, J.; Breitholtz, M.; Ebert, I.; Rechenberg, B.; Ruden, C.

2011-01-01

Ecotoxicity data with high reliability and relevance are needed to guarantee the scientific quality of environmental risk assessments of pharmaceuticals. The main advantages of a more structured approach to data evaluation include increased transparency and predictability of the risk assessment process, and the possibility to use non-standard data. In this collaboration, between the research project MistraPharma and the German Federal Environment Agency, a new set of reporting and evaluation criteria is presented and discussed. The new criteria are based on the approaches in the literature and the OECD reporting requirements, and have been further developed to include both reliability and relevance of test data. Intended users are risk assessors and researchers performing ecotoxicological experiments, but the criteria can also be used for education purposes and in the peer-review process for scientific papers. This approach intends to bridge the gap between the regulator and the scientist's needs and way of work. - Highlights: → A structured approach to data evaluation increases the transparency and predictability of the risk assessment process. → A structured approach to data reporting opens up for use of data from the open scientific literature in risk assessments. → Both relevance and reliability aspects are included in the reporting and evaluation criteria. → The criteria can be used by risk assessors, by researchers, for education purposes and in the peer-review process. - The need for reporting and evaluation criteria towards a transparent and reliable use of ecotoxicity data.

Comparison of multiple-criteria decision-making methods - results of simulation study

Directory of Open Access Journals (Sweden)

Michał Adamczak

2016-12-01

Full Text Available Background: Today, both researchers and practitioners have many methods for supporting the decision-making process. Due to the conditions in which supply chains function, the most interesting are multi-criteria methods. The use of sophisticated methods for supporting decisions requires the parameterization and execution of calculations that are often complex. So is it efficient to use sophisticated methods? Methods: The authors of the publication compared two popular multi-criteria decision-making methods: the  Weighted Sum Model (WSM and the Analytic Hierarchy Process (AHP. A simulation study reflects these two decision-making methods. Input data for this study was a set of criteria weights and the value of each in terms of each criterion. Results: The iGrafx Process for Six Sigma simulation software recreated how both multiple-criteria decision-making methods (WSM and AHP function. The result of the simulation was a numerical value defining the preference of each of the alternatives according to the WSM and AHP methods. The alternative producing a result of higher numerical value  was considered preferred, according to the selected method. In the analysis of the results, the relationship between the values of the parameters and the difference in the results presented by both methods was investigated. Statistical methods, including hypothesis testing, were used for this purpose. Conclusions: The simulation study findings prove that the results obtained with the use of two multiple-criteria decision-making methods are very similar. Differences occurred more frequently in lower-value parameters from the "value of each alternative" group and higher-value parameters from the "weight of criteria" group.

Guidance for the definition and application of probabilistic safety criteria

International Nuclear Information System (INIS)

Holmberg, J.-E.; Knochenhauer, M.

2011-05-01

The project 'The Validity of Safety Goals' has been financed jointly by NKS (Nordic Nuclear Safety Research), SSM (Swedish Radiation Safety Authority) and the Swedish and Finnish nuclear utilities. The national financing went through NPSAG, the Nordic PSA Group (Swedish contributions) and SAFIR2010, the Finnish research programme on NPP safety (Finnish contributions). The project has been performed in four phases during 2006-2010. This guidance document aims at describing, on the basis of the work performed throughout the project, issues to consider when defining, applying and interpreting probabilistic safety criteria. Thus, the basic aim of the document is to serve as a checklist and toolbox for the definition and application of probabilistic safety criteria. The document describes the terminology and concepts involved, the levels of criteria and relations between these, how to define a probabilistic safety criterion, how to apply a probabilistic safety criterion, on what to apply the probabilistic safety criterion, and how to interpret the result of the application. The document specifically deals with what makes up a probabilistic safety criterion, i.e., the risk metric, the frequency criterion, the PSA used for assessing compliance and the application procedure for the criterion. It also discusses the concept of subsidiary criteria, i.e., different levels of safety goals. The results from the project can be used as a platform for discussions at the utilities on how to define and use quantitative safety goals. The results can also be used by safety authorities as a reference for risk-informed regulation. The outcome can have an impact on the requirements on PSA, e.g., regarding quality, scope, level of detail, and documentation. Finally, the results can be expected to support on-going activities concerning risk-informed applications. (Author)

Guidance for the definition and application of probabilistic safety criteria

Energy Technology Data Exchange (ETDEWEB)

Holmberg, J.-E. (VTT Technical Research Centre of Finland (Finland)); Knochenhauer, M. (Scandpower AB (Sweden))

2011-05-15

The project 'The Validity of Safety Goals' has been financed jointly by NKS (Nordic Nuclear Safety Research), SSM (Swedish Radiation Safety Authority) and the Swedish and Finnish nuclear utilities. The national financing went through NPSAG, the Nordic PSA Group (Swedish contributions) and SAFIR2010, the Finnish research programme on NPP safety (Finnish contributions). The project has been performed in four phases during 2006-2010. This guidance document aims at describing, on the basis of the work performed throughout the project, issues to consider when defining, applying and interpreting probabilistic safety criteria. Thus, the basic aim of the document is to serve as a checklist and toolbox for the definition and application of probabilistic safety criteria. The document describes the terminology and concepts involved, the levels of criteria and relations between these, how to define a probabilistic safety criterion, how to apply a probabilistic safety criterion, on what to apply the probabilistic safety criterion, and how to interpret the result of the application. The document specifically deals with what makes up a probabilistic safety criterion, i.e., the risk metric, the frequency criterion, the PSA used for assessing compliance and the application procedure for the criterion. It also discusses the concept of subsidiary criteria, i.e., different levels of safety goals. The results from the project can be used as a platform for discussions at the utilities on how to define and use quantitative safety goals. The results can also be used by safety authorities as a reference for risk-informed regulation. The outcome can have an impact on the requirements on PSA, e.g., regarding quality, scope, level of detail, and documentation. Finally, the results can be expected to support on-going activities concerning risk-informed applications. (Author)

Criteria for applicability of the impulse approach to collisions

International Nuclear Information System (INIS)

Sharma, R.D.; Bakshi, P.M.; Sindoni, J.M.

1990-01-01

Using an exact formulation of impulse approach (IA) to atom-diatom collisions, we assess its internal consistency. By comparing the cross sections in the forward and reverse directions for the vibrational-rotational inelastic processes, using the half-on-the-shell (post and prior) models of the two-body t matrix, we show that in both cases the IA leads to a violation of the semidetailed balance (SDB) condition for small scattering angles. An off-shell model for the two-body t matrix, which preserves SDB, is shown to have other serious shortcomings. The cross sections are studied quantitatively as a function of the relative translational energy and the mass of the incident particle, and criteria discussed for the applicability of IA

Site suitability criteria for solidified high level waste repositories

International Nuclear Information System (INIS)

Heckman, R.A.; Holdsworth, T.; Isherwood, D.; Towse, D.F.; Dayem, N.L.

1979-01-01

The NRC is developing a framework of regulations, criteria, and standards. Lawrence Livermore Laboratory provides broad technical support to the NRC for developing this regulatory framework, part of which involves site suitability criteria for solidified high-level wastes (SHLW). Both the regulatory framework and the technical base on which it rests have evolved in time. This document is the second report of the technical support project. It was issued as a draft working paper for a programmatic review held at LLL from August 16 to 18, 1977. It was printed and distributed solely as a briefing document on preliminary methodology and initial findings for the purpose of critical review by those in attendance. These briefing documents are being reprinted now in their original formats as UCID-series reports for the sake of the historical record. Analysis results have evolved as both the models and data base have changed. As a result, the methodology, models, and data base in this document are severely outmoded

Quantitative determination of fatty acids in marine fish and shellfish from warm water of Straits of Malacca for nutraceutical purposes.

Science.gov (United States)

Abd Aziz, Nurnadia; Azlan, Azrina; Ismail, Amin; Mohd Alinafiah, Suryati; Razman, Muhammad Rizal

2013-01-01

This study was conducted to quantitatively determine the fatty acid contents of 20 species of marine fish and four species of shellfish from Straits of Malacca. Most samples contained fairly high amounts of polyunsaturated fatty acids (PUFAs), especially alpha-linolenic acid (ALA, C18:3 n3), eicosapentaenoic acid (EPA, C20:5 n3), and docosahexaenoic acid (DHA, C22:6 n3). Longtail shad, yellowstripe scad, and moonfish contained significantly higher (P < 0.05) amounts of eicosapentaenoic acid (EPA), docosahexaenoic acid (DHA), and alpha-linolenic acid (ALA), respectively. Meanwhile, fringescale sardinella, malabar red snapper, black pomfret, Japanese threadfin bream, giant seaperch, and sixbar grouper showed considerably high content (537.2-944.1 mg/100 g wet sample) of desirable omega-3 fatty acids. The polyunsaturated-fatty-acids/saturated-fatty-acids (P/S) ratios for most samples were higher than that of Menhaden oil (P/S = 0.58), a recommended PUFA supplement which may help to lower blood pressure. Yellowstripe scad (highest DHA, ω - 3/ω - 6 = 6.4, P/S = 1.7), moonfish (highest ALA, ω - 3/ω - 6 = 1.9, P/S = 1.0), and longtail shad (highest EPA, ω - 3/ω - 6 = 0.8, P/S = 0.4) were the samples with an outstandingly desirable overall composition of fatty acids. Overall, the marine fish and shellfish from the area contained good composition of fatty acids which offer health benefits and may be used for nutraceutical purposes in the future.

Guidelines for the structural design of experimental multi-purpose VHTR at the elevated temperature services

International Nuclear Information System (INIS)

Nomura, Sueo; Uga, Takeo; Miyamoto, Yoshiaki; Muto, Yasushi; Ikushima, Takeshi

1976-02-01

The guidelines are presented for structural design of the experimental multi-purpose VHTR(Very High Temperature Reactor) at the elevated temperature services. Covered are features of the VHTR structural design, specifications, safety design, seismic design, failure modes to be considered, stress criteria for various load combinations and the mechanical properties of the materials. The guidelines were prepared by referring to safety criteria of high-temperature gas cooled reactors, ASME Boiler and Pressure Vessel code, Section III, case 1592 and the domestic seismic design guide of nuclear power facilities. (auth.)

Development of a comprehensive list of criteria for evaluating consumer education materials on colorectal cancer screening.

Science.gov (United States)

Dreier, Maren; Borutta, Birgit; Seidel, Gabriele; Kreusel, Inga; Töppich, Jürgen; Bitzer, Eva M; Dierks, Marie-Luise; Walter, Ulla

2013-09-13

Appropriate patient information materials may support the consumer's decision to attend or not to attend colorectal cancer (CRC) screening tests (fecal occult blood test and screening colonoscopy). The aim of this study was to develop a list of criteria to assess whether written health information materials on CRC screening provide balanced, unbiased, quantified, understandable, and evidence-based health information (EBHI) about CRC and CRC screening. The list of criteria was developed based on recommendations and assessment tools for health information in the following steps: (1) Systematic literature search in 13 electronic databases (search period: 2000-2010) and completed by an Internet search (2) Extraction of identified criteria (3) Grouping of criteria into categories and domains (4) Compilation of a manual of adequate answers derived from systematic reviews and S3 guidelines (5) Review by external experts (6) Modification (7) Final discussion with external experts. Thirty-one publications on health information tools and recommendations were identified. The final list of criteria includes a total of 230 single criteria in three generic domains (formal issues, presentation and understandability, and neutrality and balance) and one CRC-specific domain. A multi-dimensional rating approach was used whenever appropriate (e.g., rating for the presence, correctness, presentation and level of evidence of information). Free text input was allowed to ensure the transparency of assessment. The answer manual proved to be essential to the rating process. Quantitative analyses can be made depending on the level and dimensions of criteria. This comprehensive list of criteria clearly has a wider range of evaluation than previous assessment tools. It is not intended as a final quality assessment tool, but as a first step toward thorough evaluation of specific information materials for their adherence to EBHI requirements. This criteria list may also be used to revise

Selection criteria for container materials at the proposed Yucca Mountain high level nuclear waste repository

International Nuclear Information System (INIS)

Halsey, W.G.

1989-11-01

A geological repository has been proposed for the permanent disposal of the nation's high level nuclear waste at Yucca Mountain in the Nevada desert. The containers for this waste must remain intact for the unprecedented service lifetime of 1000 years. A combination of engineering, regulatory, and licensing requirements complicate the container material selection. In parallel to gathering information regarding the Yucca Mountain service environment and material performance data, a set of selection criteria have been established which compare candidate materials to the performance requirements, and allow a quantitative comparison of candidates. These criteria assign relative weighting to varied topic areas such as mechanical properties, corrosion resistance, fabricability, and cost. Considering the long service life of the waste containers, it is not surprising that the corrosion behavior of the material is a dominant factor. 7 refs

SU-G-TeP1-04: Deriving Spot Shape Criteria for Proton Pencil Beam Scanning

International Nuclear Information System (INIS)

Wulff, J; Huggins, A

2016-01-01

Purpose: The shape of a single beam in proton PBS influences the resulting dose distribution. Spot profiles are modelled as two-dimensional Gaussian (single/ double) distributions in treatment planning systems (TPS). Impact of slight deviations from an ideal Gaussian on resulting dose distributions is typically assumed to be small due to alleviation by multiple Coulomb scattering (MCS) in tissue and superposition of many spots. Quantitative limits are however not clear per se. Methods: A set of 1250 deliberately deformed profiles with sigma=4 mm for a Gaussian fit were constructed. Profiles and fit were normalized to the same area, resembling output calibration in the TPS. Depth-dependent MCS was considered. The deviation between deformed and ideal profiles was characterized by root-mean-squared deviation (RMSD), skewness/ kurtosis (SK) and full-width at different percentage of maximum (FWxM). The profiles were convolved with different fluence patterns (regular/ random) resulting in hypothetical dose distributions. The resulting deviations were analyzed by applying a gamma-test. Results were compared to measured spot profiles. Results: A clear correlation between pass-rate and profile metrics could be determined. The largest impact occurred for a regular fluence-pattern with increasing distance between single spots, followed by a random distribution of spot weights. The results are strongly dependent on gamma-analysis dose and distance levels. Pass-rates of >95% at 2%/2 mm and 40 mm depth (=70 MeV) could only be achieved for RMSD<10%, deviation in FWxM at 20% and root of quadratic sum of SK <0.8. As expected the results improve for larger depths. The trends were well resembled for measured spot profiles. Conclusion: All measured profiles from ProBeam sites passed the criteria. Given the fact, that beam-line tuning can result shape distortions, the derived criteria represent a useful QA tool for commissioning and design of future beam-line optics.

Decision criteria in PSA applications

International Nuclear Information System (INIS)

Holmberg, J.E.; Pulkkinen, U.; Rosqvist, T.; Simola, K.

2001-11-01

Along with the adoption of risk informed decision making principles, the need for formal probabilistic decision rule or criteria has been risen. However, there are many practical and theoretical problems in the application of probabilistic criteria. One has to think what is the proper way to apply probabilistic rules together with deterministic ones and how the criteria are weighted with respect to each other. In this report, we approach the above questions from the decision theoretic point of view. We give a short review of the most well known probabilistic criteria, and discuss examples of their use. We present a decision analytic framework for evaluating the criteria, and we analyse how the different criteria behave under incompleteness or uncertainty of the PSA model. As the conclusion of our analysis we give recommendations on the application of the criteria in different decision situations. (au)

Laser Safety Inspection Criteria

International Nuclear Information System (INIS)

Barat, K.

2005-01-01

A responsibility of the Laser Safety Officer (LSO) is to perform laser audits. The American National Standard Z136.1 Safe Use of Lasers references this requirement through several sections. One such reference is Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''. The composition, frequency and rigor of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms It is common for audit findings from one inspector or inspection to the next to vary even when reviewing the same material. How often has one heard a comment, ''well this area has been inspected several times over the years and no one ever said this or that was a problem before''. A great number of audit items, and therefore findings, are subjective because they are based on the experience and interest of the auditor to particular items on the checklist. Beam block usage, to one set of eyes might be completely adequate, while to another, inadequate. In order to provide consistency, the Laser Safety Office of the National Ignition Facility Directorate has established criteria for a number of items found on the typical laser safety audit form. The criteria are distributed to laser users. It serves two broad purposes; first, it gives the user an expectation of what will be reviewed by an auditor. Second, it is an opportunity to explain audit items to the laser user and thus the reasons for some of these items, such as labelling of beam blocks

Site selection criteria for the shallow land burial of low-level radioactive waste

International Nuclear Information System (INIS)

Falconer, K.L.; Hull, L.C.; Mizell, S.A.

The shallow land burial of low-level waste must be accomplished in a manner that ensures the public and biosphere are protected from harmful amounts of radiation. This can be attained by selecting, designing, operating and closing sites such that contaminants never leave the site boundary in levels above regulatory limits. Site design, operation and closure are all functions of the characteristics of the site selected. As a result, the site selection process offers the most effective means for optimizing safe, efficient and economical low-level waste burial practices. The purpose of this document is to set forth criteria for the selection of shallow land burial sites. Criteria are standard rules, by which the ability of a site to meet waste management goals can be judged. They are comprehensive, universal, and qualitative and are applicable in any geologic environment. Site selection criteria provide the framework for the siting process

Multi criteria evaluation for universal soil loss equation based on geographic information system

Science.gov (United States)

Purwaamijaya, I. M.

2018-05-01

The purpose of this research were to produce(l) a conceptual, functional model designed and implementation for universal soil loss equation (usle), (2) standard operational procedure for multi criteria evaluation of universal soil loss equation (usle) using geographic information system, (3) overlay land cover, slope, soil and rain fall layers to gain universal soil loss equation (usle) using multi criteria evaluation, (4) thematic map of universal soil loss equation (usle) in watershed, (5) attribute table of universal soil loss equation (usle) in watershed. Descriptive and formal correlation methods are used for this research. Cikapundung Watershed, Bandung, West Java, Indonesia was study location. This research was conducted on January 2016 to May 2016. A spatial analysis is used to superimposed land cover, slope, soil and rain layers become universal soil loss equation (usle). Multi criteria evaluation for universal soil loss equation (usle) using geographic information system could be used for conservation program.

Absolute quantitative total-body small-animal SPECT with focusing pinholes

NARCIS (Netherlands)

Wu, C.; Van der Have, F.; Vastenhouw, B.; Dierckx, R.A.J.O.; Paans, A.M.J.; Beekman, F.J.

2010-01-01

Purpose: In pinhole SPECT, attenuation of the photon flux on trajectories between source and pinholes affects quantitative accuracy of reconstructed images. Previously we introduced iterative methods that compensate for image degrading effects of detector and pinhole blurring, pinhole sensitivity

EVALUATION OF SERVICE SUPPLY CHAIN PERFORMANCE CRITERIA WITH DANP METHOD

OpenAIRE

ÖZVERİ, Onur; GÜÇLÜ, Pembe; AYCİN, Ejder

2018-01-01

Despite the service industry composes large part of the world economy, the academic studies and applications on supply chain are mainly about production industry. Because of the different structure of services, the service supply chain and also performance criteria-metrics differ from the product supply chain. The aim of this paper is to evaluate the supply chain performance metrics for restaurant sector. For this purpose in the first and second part of the paper the service supply chain conc...

Criteria and tools for scientific software quality measurements

Energy Technology Data Exchange (ETDEWEB)

Tseng, M Y [Previse Inc., Willowdale ON (Canada)

1995-12-01

Not all software used in the nuclear industry needs the rigorous formal verification, reliability testing and quality assessment that are being applied to safety critical software. Recently, however, there is increasing recognition that systematic and objective quality assessment of the scientific software used in design and safety analyses of nuclear facilities is necessary to support safety and licensing decisions. Because of the complexity and large size of these programs and the resource constraints faced by the AECB reviewer, it is desirable that appropriate automated tools are used wherever practical. To objectively assess the quality of software, a set of attributes of a software product by which its quality is described and evaluated must be established. These attributes must be relevant to the application domain of software under evaluation. To effectively assess the quality of software, metrics defining quantitative scale and method appropriate to determine the value of attributes need to be applied. To cost-effectively perform the evaluation, use of suitable automated tools is desirable. In this project, criteria for evaluating the quality of scientific software are presented; metrics for which those criteria can be evaluated are identified; a survey of automated tools to measure those metrics was conducted and the most appropriate tool (QA Fortran) was acquired; and the tool usage was demonstrated on three sample programs. (author) 5 refs.

Criteria and tools for scientific software quality measurements

International Nuclear Information System (INIS)

Tseng, M.Y.

1995-12-01

Not all software used in the nuclear industry needs the rigorous formal verification, reliability testing and quality assessment that are being applied to safety critical software. Recently, however, there is increasing recognition that systematic and objective quality assessment of the scientific software used in design and safety analyses of nuclear facilities is necessary to support safety and licensing decisions. Because of the complexity and large size of these programs and the resource constraints faced by the AECB reviewer, it is desirable that appropriate automated tools are used wherever practical. To objectively assess the quality of software, a set of attributes of a software product by which its quality is described and evaluated must be established. These attributes must be relevant to the application domain of software under evaluation. To effectively assess the quality of software, metrics defining quantitative scale and method appropriate to determine the value of attributes need to be applied. To cost-effectively perform the evaluation, use of suitable automated tools is desirable. In this project, criteria for evaluating the quality of scientific software are presented; metrics for which those criteria can be evaluated are identified; a survey of automated tools to measure those metrics was conducted and the most appropriate tool (QA Fortran) was acquired; and the tool usage was demonstrated on three sample programs. (author) 5 refs

DEVELOPMENT OF RISK-BASED AND TECHNOLOGY-INDEPENDENT SAFETY CRITERIA FOR GENERATION IV SYSTEMS

Energy Technology Data Exchange (ETDEWEB)

William E. Kastenberg; Edward Blandford; Lance Kim

2009-03-31

This project has developed quantitative safety goals for Generation IV (Gen IV) nuclear energy systems. These safety goals are risk based and technology independent. The foundations for a new approach to risk analysis has been developed, along with a new operational definition of risk. This project has furthered the current state-of-the-art by developing quantitative safety goals for both Gen IV reactors and for the overall Gen IV nuclear fuel cycle. The risk analysis approach developed will quantify performance measures, characterize uncertainty, and address a more comprehensive view of safety as it relates to the overall system. Appropriate safety criteria are necessary to manage risk in a prudent and cost-effective manner. This study is also important for government agencies responsible for managing, reviewing, and for approving advanced reactor systems because they are charged with assuring the health and safety of the public.

DEVELOPMENT OF RISK-BASED AND TECHNOLOGY-INDEPENDENT SAFETY CRITERIA FOR GENERATION IV SYSTEMS

International Nuclear Information System (INIS)

Kastenberg, William E.; Blandford, Edward; Kim, Lance

2009-01-01

This project has developed quantitative safety goals for Generation IV (Gen IV) nuclear energy systems. These safety goals are risk based and technology independent. The foundations for a new approach to risk analysis has been developed, along with a new operational definition of risk. This project has furthered the current state-of-the-art by developing quantitative safety goals for both Gen IV reactors and for the overall Gen IV nuclear fuel cycle. The risk analysis approach developed will quantify performance measures, characterize uncertainty, and address a more comprehensive view of safety as it relates to the overall system. Appropriate safety criteria are necessary to manage risk in a prudent and cost-effective manner. This study is also important for government agencies responsible for managing, reviewing, and for approving advanced reactor systems because they are charged with assuring the health and safety of the public

The strategic selecting criteria and performance by using the multiple criteria method

Directory of Open Access Journals (Sweden)

Lisa Y. Chen

2008-02-01

Full Text Available As the increasing competitive intensity in the current service market, organizational capabilities have been recognized as the importance of sustaining competitive advantage. The profitable growth for the firms has been fueled a need to systematically assess and renew the organization. The purpose of this study is to analyze the financial performance of the firms to create an effective evaluating structure for the Taiwan's service industry. This study utilized TOPSIS (technique for order preference by similarity to ideal solution method to evaluate the operating performance of 12 companies. TOPSIS is a multiple criteria decision making method to identify solutions from a finite set of alternatives based upon simultaneous minimization of distance from an ideal point and maximization of distance from a nadir point. By using this approach, this study measures the financial performance of firms through two aspects and ten indicators. The result indicated e-life had outstanding performance among the 12 retailers. The findings of this study provided managers to better understand their market position, competition, and profitability for future strategic planning and operational management.

Alternative microbial methods: An overview and selection criteria.

Science.gov (United States)

Jasson, Vicky; Jacxsens, Liesbeth; Luning, Pieternel; Rajkovic, Andreja; Uyttendaele, Mieke

2010-09-01

This study provides an overview and criteria for the selection of a method, other than the reference method, for microbial analysis of foods. In a first part an overview of the general characteristics of rapid methods available, both for enumeration and detection, is given with reference to relevant bibliography. Perspectives on future development and the potential of the rapid method for routine application in food diagnostics are discussed. As various alternative "rapid" methods in different formats are available on the market, it can be very difficult for a food business operator or for a control authority to select the most appropriate method which fits its purpose. Validation of a method by a third party, according to international accepted protocol based upon ISO 16140, may increase the confidence in the performance of a method. A list of at the moment validated methods for enumeration of both utility indicators (aerobic plate count) and hygiene indicators (Enterobacteriaceae, Escherichia coli, coagulase positive Staphylococcus) as well as for detection of the four major pathogens (Salmonella spp., Listeria monocytogenes, E. coli O157 and Campylobacter spp.) is included with reference to relevant websites to check for updates. In a second part of this study, selection criteria are introduced to underpin the choice of the appropriate method(s) for a defined application. The selection criteria link the definition of the context in which the user of the method functions - and thus the prospective use of the microbial test results - with the technical information on the method and its operational requirements and sustainability. The selection criteria can help the end user of the method to obtain a systematic insight into all relevant factors to be taken into account for selection of a method for microbial analysis. Copyright 2010 Elsevier Ltd. All rights reserved.

Supply capability creation process: Key milestone criteria and activities

Directory of Open Access Journals (Sweden)

Jordan Verrollot

2017-09-01

Full Text Available Purpose: The article focuses on supply capability creation (SCC within the new product development (NPD. The purpose is to establish an SCC process describing the main SCC activities and milestone criteria in preparing the supply process for new products Design/methodology/approach: The article analyses the earlier research, carries out current state analysis of six case companies regarding the SCC areas, and proposes a SCC process. Findings: The developed SCC process aims at preparing the operational supply capability for a developed new product based on the preferred, qualified and contracted suppliers and materials along the NPD process, and ultimately at the product ramp-up. Originality/value: This paper introduces a SCC process that has not been presented earlier in the literature, highlighting the important role of the SCC for successful product ramp-ups.

Clinical and laboratory criteria for type 2 diabetes mellitus in children

Directory of Open Access Journals (Sweden)

T.V. Sorokman

2018-02-01

Full Text Available The purpose of this review was the analysis of literature data on clinical and laboratory criteria for type 2 diabetes mellitus in children. A review of scientific literature was conducted using Pubmed as the search engine by the keywords: diabetes mellitus, type 2 diabetes mellitus, clinical picture, laboratory criteria, risk factors, taking into consideration studies conducted in the last 10 years, citation review of relevant primary and review articles, conference abstracts, personal files, and contact with expert informants. The criterion for the selection of articles for the study was based on their close relevance to the topic, thus, out of 213 analyzed articles, the findings of the researchers covered in 21 articles were crucial. Type 2 mellitus is a multifactorial di­sease with hereditary predisposition. The majority of patients with type 2 diabetes mellitus indicate the presence of such a disease in the immediate family; in the presence of type 2 diabetes in one of the parents, the risk of its development during the life of the descendant is 40 %. In most cases, severe clinical manifestations are absent, and the diagnosis is established at a routine determination of glycemia level. The disease usually starts at the age of 10 years, with the overwhelming majority of patients having obesity and other components of the metabolic syndrome. Criteria for the diagnosis of type 2 diabetes are proposed by the International Society for Pediatric and Adolescent Diabetes. With a purpose of differential diagnosis of type 1 and type 2 diabetes in the onset of the disease, the level of insulin and C-peptide in the blood is determined both fasting, and during an oral glucose tolerance test.

Monitoring programmes for internal exposure: designing criteria

International Nuclear Information System (INIS)

Rojo, Ana M.; Gomez Parada, Ines.

2007-01-01

The purpose of this document is to offer guidance for the decision whether a monitoring programme is required and how it should be designed. It can be also used as a tool for making the standing programmes consistent with the most recent publications on internal dosimetry, such as ISO 20553 'Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material', specific publications of the IAEA and ICRP, and including the conclusions of the OMINEX Project ('Optimisation of Monitoring for Internal Exposures') and IDEAS Project. It is established that the general purpose of the monitoring is verify that each worker is protected adequately against risks from radionuclide intakes and document that the protection complies with legal requirements. The criteria for a particular monitoring programme designing is based on the magnitude of the probable intake and the possibility of detecting a significant event when it occurs. So, the risk assessment for each work process must be evaluated and each worker is classified accordingly. This classification implies the acceptance of reference effective dose values (1 y 6 mSv/y ). (author) [es

The concept of incomplete fibromyalgia syndrome: comparison of incomplete fibromyalgia syndrome with fibromyalgia syndrome by 1990 ACR classification criteria and its implications for newer criteria and clinical practice.

Science.gov (United States)

Yunus, Muhammad B; Aldag, Jean C

2012-03-01

The 1990 American College of Rheumatology (ACR) classification criteria for fibromyalgia/fibromyalgia syndrome (FMS) has 2 components: (a) widespread pain (WSP) and (b) presence of 11 or more tender points (TP) among possible 18 sites. Some clinic patients fulfill 1 component but not the other. We have considered these patients to have incomplete FMS (IFMS). The purpose of this study was to examine the clinical and psychological differences between IFMS and FMS (by 1990 ACR criteria) because such comparison may be helpful to diagnose patients in the clinic. Six hundred consecutive patients referred to our rheumatology clinic with a diagnosis of FMS were examined by a standard protocol to determine whether they fulfilled the 1990 criteria for FMS. Both IFMS and FMS groups were compared in demographic, clinical, and psychological variables using appropriate statistical methods. One hundred twelve (18.7%) patients did not satisfy the 1990 ACR criteria and were classified as IFMS. Symptoms in IFMS and FMS were similar, generally with less frequent and less severe symptoms in the IFMS group. In IFMS, no significant difference was found among the WSP and TP component subgroups. Both TP and WSP were correlated with important features of FMS. Fulfillment of the ACR 1990 criteria is not necessary for a diagnosis of FMS in the clinic. For diagnosis and management of FMS in the clinical setting, IFMS patients, along with consideration of the total clinical picture, may be considered to have FMS, albeit generally mild.

Probabilistic risk criteria and their application to nuclear chemical plant design

International Nuclear Information System (INIS)

Arthur, T.; Barnes, D.S.; Brown, M.L.; Taig, A.R.; Johnston, B.D.; Hayns, M.

1989-01-01

A nuclear chemical plant safety strategy is presented. The use of risk criteria in design is demonstrated by reference to a particular area of the plant. This involves the application of Probabilistic Risk Assessment (PRA) techniques. Computer programs developed by the UK Atomic Energy Authority (UKAEA) at its Safety and Reliability Directorate (SRD) are used toe valuate and analyze the resultant fault trees. the magnitude of releases are estimated and individual and societal risks determined. The paper concludes that the application of PRA to a nuclear chemical plant can be structured in such a way as to allow a designer to work to quantitative risk targets

Integrating Quantitative and Qualitative Research in Development Projects

OpenAIRE

Bamberger, Michael

2000-01-01

"Much of the early work on poverty was highly quantitative:... It became increasingly clear, however, that while numbers are essential for policy and monitoring purposes, it is also important to understand people's perception of poverty and their mechanisms for coping with poverty and other situations of extreme economic and social stress." Researchers have recognized over the past few yea...

Quantitative risk in radiation protection standards

International Nuclear Information System (INIS)

Bond, V.P.

1979-01-01

Although the overall aim of radiobiology is to understand the biological effects of radiation, it also has the implied practical purpose of developing rational measures for the control of radiation exposure in man. The emphasis in this presentation is to show that the enormous effort expended over the years to develop quantitative dose-effect relationships in biochemical and cellular systems, animals, and human beings now seems to be paying off. The pieces appear to be falling into place, and a framework is evolving to utilize these data. Specifically, quantitative risk assessments will be discussed in terms of the cellular, animal, and human data on which they are based; their use in the development of radiation protection standards; and their present and potential impact and meaning in relation to the quantity dose equivalent and its special unit, the rem

A grey DEMATEL approach to develop third-party logistics provider selection criteria

DEFF Research Database (Denmark)

Govindan, Kannan; Khodaverdi, Roohollah; Vafadarnikjoo, Amin

2016-01-01

- The paper's results help managers of automotive industries, particularly in developing countries, to outsource logistics activities to 3PL providers effectively and to create a significant competitive advantage. Originality/value - The main contributions of this paper are twofold. First, this paper proposes...... an integrated grey DEMATEL method to consider interdependent relationships among the 3PL provider selection criteria. Second, this study is one of the first studies to consider 3PL provider selection in a developing country like Iran....... identifies important criteria for 3PL provider selection and evaluation, and the purpose of this paper is to select 3PL providers from the viewpoint of firms which were already outsourcing their logistics services. Design/methodology/approach - This study utilized the grey decision-making trial...

Clinicians' perspective of the current diagnostic criteria for myofascial pain syndrome.

Science.gov (United States)

Grosman-Rimon, Liza; Clarke, Hance; Chan, Aaron K; Mills, Patricia Branco; Rathbone, Alasdair Timothy Llewelyn; Kumbhare, Dinesh

2017-01-01

Myofascial pain syndrome (MPS) is one of the most common chronic musculoskeletal pain disorders. However, MPS is often under-diagnosed. The purpose of this study was to characterize practicing clinicians' perspectives of the current diagnostic criteria for MPS. A cross-sectional study design was used with a self-administered questionnaire. The questionnaire evaluated clinicians' perspective of the current diagnostic criteria for MPS. The sample population (n= 119) consisted of 40% family physicians, 31% physical medicine (PM) and rehabilitation specialists, 11% rheumatologists, 10% emergency room (ER) physicians, and 8% anesthesiologists specializing in chronic pain. Our findings demonstrated that participating clinicians agree that ``point tenderness'' and ``pain reproduction'' are criteria for MPS. In contrast, the clinicians do not consider ``autonomic symptoms'' as an important criterion for MPS. The anesthesiologists view ``restricted range of motion'' as a criterion for MPS more than the other groups, and they tend to consider ``referred pain'' and ``pain reproduction'' as criteria. Physical medicine and rehabilitation specialists and anesthesiologists tend to view ``local twitch response'' more as a criterion for MPS compared with the other groups. Most groups of clinicians consider ``weakness without atrophy'' as an important MPS criterion except for family physicians. It is important to note that ``poor sleep'', ``daytime fatigue'' and ``cognitive symptoms'', which are not considered as MPS symptoms, are often mistaken for MPS among practicing clinicians. Our findings suggest that the diagnostic criteria are not well known, highlighting the need for an expert consensus to determine the importance of each criterion for MPS diagnosis.

Comparing the effects of rise time and inspiratory cycling criteria on 6 different mechanical ventilators.

Science.gov (United States)

Gonzales, Joshua F; Russian, Christopher J; Gregg Marshall, S; Collins, Kevin P

2013-03-01

Inspiratory rise time and cycling criteria are important settings in pressure support ventilation. The purpose of this study was to investigate the impact of minimum and maximum rise time and inspiratory cycling criteria settings on 6 new generation ventilators. Our hypothesis was there would be a difference in the exhaled tidal volume, inspiratory time, and peak flow among 6 different ventilators, based, on change in rise time and cycling criteria. The research utilized a breathing simulator and 4 different ventilator models. All mechanical ventilators were set to a spontaneous mode of ventilation with settings of pressure support 8 cm H2O and PEEP of 5 cm H2O. A minimum and maximum setting for rise time and cycling criteria were examined. Exhaled tidal volume, inspiratory time, and peak flow measurements were recorded for each simulation. Significant (P ventilator. Significant differences in exhaled tidal volume, inspiratory time, and peak flow were observed by adjusting rise time and cycling criteria. This research demonstrates that during pressure support ventilation strategy, adjustments in rise time and/or cycling criteria can produce changes in inspiratory parameters. Obviously, this finding has important implications for practitioners who utilize a similar pressure support strategy when conducting a ventilator wean. Additionally, this study outlines major differences among ventilator manufacturers when considering inspiratory rise time and cycling criteria.

Continuity between DSM-5 Categorical Criteria and Traits Criteria for Borderline Personality Disorder.

Science.gov (United States)

Bach, Bo; Sellbom, Martin

2016-08-01

Borderline personality disorder (BPD) includes a heterogeneous constellation of symptoms operationalized with 9 categorical criteria. As the field of personality disorder (PD) research moves to emphasize dimensional traits in its operationalization, it is important to delineate continuity between the 9 DSM-IV/Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5) categorical criteria for BPD and the trait dimensions in DSM-5 Section III. To date, no study has attempted such validation. We examined the associations between the 9 categorical DSM-IV/DSM-5 criteria for BPD and the trait dimensions of the alternative DSM-5 model for PDs in consecutively recruited psychiatric outpatients (N = 142; 68% female; age: mean 29.02, SD 8.38). This was investigated by means of bivariate correlations, followed by multiple logistic regression analysis. The categorical BPD criteria were associated with conceptually related DSM-5 Section III traits (P > 0.001), except for the criterion of chronic feelings of emptiness. Consistent with the proposed traits criteria for BPD in DSM-5 Section III, we found Emotional lability, Anxiousness, Separation insecurity, Depressivity, Impulsivity, Risk taking, and Hostility to capture conceptually coherent BPD categorical criteria, while Suspiciousness was also strongly associated with BPD criteria. At the domain level, this applied to Negative affectivity, Disinhibition, and Psychoticism. Notably, Emotional lability, Impulsivity, and Suspiciousness emerged as unique predictors of BPD (P > 0.05). In addition to the proposed BPD traits criteria, Suspiciousness and features of Psychoticism also augment BPD features. Provided that these findings are replicated in forthcoming research, a modified traits operationalization of BPD is warranted. © The Author(s) 2016.

Alternative risk-based criteria for transportation of radioactive materials on the United States Department of Energy Hanford Site

International Nuclear Information System (INIS)

Mercado, J.E.; Field, J.G.; Smith, R.J.; Wang, O.S.

1993-01-01

This paper presents the development of an alternative method to evaluate packaging safety for radioactive material transported solely within the boundaries of a restricted site; the method uses risk-based criteria to assess and document packaging safety. These criteria offer a standard against which the results of a risk assessment are compared to evaluate the safety of a transportation operation. Numerous payloads are transported entirely within the U.S. Department of Energy's Hanford Site boundaries. The U.S. Department of Energy requires that the safety of onsite transportation be equivalent to the safety provided for transporting radioactive materials in commerce as regulated by the U.S. Department of Transportation and the U.S. Nuclear Regulatory Commission. Some onsite packaging configurations do not meet the performance criteria that form the basis of these regulations, necessitating the establishment of alternative criteria to evaluate safety. Quantitatively defined criteria have been derived from the U.S. Department of Transportation limits for package radiation levels, curie content, activity release, and external contamination levels. Recommendations of the International Committee on Radiation Protection may further restrict the criteria. The proposed method documents packaging safety in a transportation risk assessment. The assessment estimates accident frequencies, conservatively evaluates the dose consequences of these accidents, and compares the results to the established risk acceptance criteria. Specific Hanford Site onsite packaging and transportation issues illustrate the alternative method. The paper compares the solutions resulting from the application of risk-based criteria to those resulting from strict compliance with commercial transportation regulations. (author)

Accuracy of Carotid Duplex Criteria in Diagnosis of Significant Carotid Stenosis in Asian Patients.

Science.gov (United States)

Dharmasaroja, Pornpatr A; Uransilp, Nattaphol; Watcharakorn, Arvemas; Piyabhan, Pritsana

2018-03-01

Extracranial carotid stenosis can be diagnosed by velocity criteria of carotid duplex. Whether they are accurately applied to define severity of internal carotid artery (ICA) stenosis in Asian patients needs to be proved. The purpose of this study was to evaluate the accuracy of 2 carotid duplex velocity criteria in defining significant carotid stenosis. Carotid duplex studies and magnetic resonance angiography were reviewed. Criteria 1 was recommended by the Society of Radiologists in Ultrasound; moderate stenosis (50%-69%): peak systolic velocity (PSV) 125-230 cm/s, diastolic velocity (DV) 40-100 cm/s; severe stenosis (>70%): PSV greater than 230 cm/s, DV greater than 100 cm/s. Criteria 2 used PSV greater than 140 cm/s, DV less than 110 cm/s to define moderate stenosis (50%-75%) and PSV greater than 140 cm/s, DV greater than 110 cm/s for severe stenosis (76%-95%). A total of 854 ICA segments were reviewed. There was moderate stenosis in 72 ICAs, severe stenosis in 50 ICAs, and occlusion in 78 ICAs. Criteria 2 had slightly lower sensitivity, whereas higher specificity and accuracy than criteria 1 were observed in detecting moderate stenosis (criteria 1: sensitivity 95%, specificity 83%, accuracy 84%; criteria 2: sensitivity 92%, specificity 92%, and accuracy 92%). However, in detection of severe ICA stenosis, no significant difference in sensitivity, specificity, and accuracy was found (criteria 1: sensitivity 82%, specificity 99.57%, accuracy 98%; criteria 2: sensitivity 86%, specificity 99.68%, and accuracy 99%). In the subgroup of moderate stenosis, the criteria using ICA PSV greater than 140 cm/s had higher specificity and accuracy than the criteria using ICA PSV 125-230 cm/s. However, there was no significant difference in detection of severe stenosis or occlusion of ICA. Copyright © 2018 National Stroke Association. Published by Elsevier Inc. All rights reserved.

APPROACHES TO LENIENCY REDUCTION IN MULTI-CRITERIA DECISION MAKING WITH INTERVAL-VALUED FUZZY SETS AND AN EXPERIMENTAL ANALYSIS

OpenAIRE

TING-YU CHEN

2012-01-01

The purpose of this paper is to present a useful method for estimating the importance of criteria and reducing the leniency bias in multiple criteria decision analysis based on interval-valued fuzzy sets. Several types of net predispositions are defined to represent an aggregated effect of interval-valued fuzzy evaluations. The suitability function for measuring the overall evaluation of each alternative is then determined based on simple additive weighting (SAW) methods. Because positive or ...

International comparison of safety criteria applied to radwaste repositories. Safety aspects of the post-operational phase

International Nuclear Information System (INIS)

Baltes, B.

1994-01-01

There is a generally accepted system of framework safety conditions governing the construction, operation, and post-operational monitoring of radwaste repositories. Although the development of these framework conditions may vary from country to country, the resulting criteria are based on the commonly accepted system of priciples and purposes established for ultimate radioactive waste disposal. The experience accumulated by GRS in the course of the plan approval procedure for the Konrad mine site and the safety-relevant studies performed for the planned Morsleben repository clearly show demand for further development of the safety criteria. In Germany, it is especially the safety criteria and detailed requirements filling the framework safety conditions that need revision and in-depth definition, as well as comparison and harmonisation with internationally applied criteria. These activities will particularly consider the international convention on radioactive waste management currently in preparation under the auspieces of the IAEA. (orig.) [de

CisLunar Habitat Internal Architecture Design Criteria

Science.gov (United States)

Jones, R.; Kennedy, K.; Howard, R.; Whitmore, M.; Martin, C.; Garate, J.

2017-01-01

Lunar Habitat Internal Architecture Study is to become a forcing function to establish a common understanding of CisLunar Phase-1 Habitation Internal Architecture design criteria, processes, and tools. The scope of the CisLunar Habitat Internal Architecture study is to design, develop, demonstrate, and evaluate a Phase-1 CisLunar Habitat common module internal architecture based on design criteria agreed to by NASA, the International Partners, and Commercial Exploration teams. This task is to define the CisLunar Phase-1 Internal Architecture Government Reference Design, assist NASA in becoming a "smart buyer" for Phase-1 Habitat Concepts, and ultimately to derive standards and requirements from the Internal Architecture Design Process. The first step was to define a Habitat Internal Architecture Design Criteria and create a structured philosophy to be used by design teams as a filter by which critical aspects of consideration would be identified for the purpose of organizing and utilizing interior spaces. With design criteria in place, the team will develop a series of iterative internal architecture concept designs which will be assessed by means of an evaluation criteria and process. These assessments will successively drive and refine the design, leading to the combination and down-selection of design concepts. A single refined reference design configuration will be developed into in a medium-to-high fidelity mockup. A multi-day human-in-the-loop mission test will fully evaluate the reference design and validate its configuration. Lessons learned from the design and evaluation will enable the team to identify appropriate standards for Phase-1 CisLunar Habitat Internal Architecture and will enable NASA to develop derived requirements in support of maturing CisLunar Habitation capabilities. This paper will describe the criteria definition process, workshop event, and resulting CisLunar Phase-1 Habitat Internal Architecture Design Criteria.

A GIS-based extended fuzzy multi-criteria evaluation for landslide susceptibility mapping

Science.gov (United States)

Feizizadeh, Bakhtiar; Shadman Roodposhti, Majid; Jankowski, Piotr; Blaschke, Thomas

2014-01-01

Landslide susceptibility mapping (LSM) is making increasing use of GIS-based spatial analysis in combination with multi-criteria evaluation (MCE) methods. We have developed a new multi-criteria decision analysis (MCDA) method for LSM and applied it to the Izeh River basin in south-western Iran. Our method is based on fuzzy membership functions (FMFs) derived from GIS analysis. It makes use of nine causal landslide factors identified by local landslide experts. Fuzzy set theory was first integrated with an analytical hierarchy process (AHP) in order to use pairwise comparisons to compare LSM criteria for ranking purposes. FMFs were then applied in order to determine the criteria weights to be used in the development of a landslide susceptibility map. Finally, a landslide inventory database was used to validate the LSM map by comparing it with known landslides within the study area. Results indicated that the integration of fuzzy set theory with AHP produced significantly improved accuracies and a high level of reliability in the resulting landslide susceptibility map. Approximately 53% of known landslides within our study area fell within zones classified as having “very high susceptibility”, with the further 31% falling into zones classified as having “high susceptibility”. PMID:26089577

Determining an appropriate method for the purpose of land allocation for ecotourism development (case study: Taleghan County, Iran).

Science.gov (United States)

Aliani, H; Kafaky, S Babaie; Saffari, A; Monavari, S M

2016-11-01

Appropriate management and planning of suitable areas for the development of ecotourism activities can play an important role in ensuring proper use of the environment. Due to the complexity of nature, applying different tools and models-particularly multi-criteria methods-can be useful in order to achieve these goals. In this study, to indicate suitable areas (land allocation) for ecotourism activities in Taleghan county, weighted linear combination (WLC) using geographical information system (GIS), fuzzy logic, and analytical network process (ANP) were used. To compare the applicability of each of these methods in achieving the goal, the results were compared with the previous model presented by Makhdoum. The results showed that the WLC and ANP methods are more efficient than the Makhdoum model in allocating lands for recreational areas and ecotourism purposes since concomitant use of fuzzy logic and ANP for ranking and weighing the criteria provides us with more flexible and logical conditions. Furthermore, the mentioned method makes it possible to involve ecological, economic, and social criteria simultaneously in the evaluation process in order to allocate land for ecotourism purposes.

Termination Criteria for Computerized Classification Testing

Directory of Open Access Journals (Sweden)

Nathan A. Thompson

2011-02-01

Full Text Available Computerized classification testing (CCT is an approach to designing tests with intelligent algorithms, similar to adaptive testing, but specifically designed for the purpose of classifying examinees into categories such as - pass- and - fail.- Like adaptive testing for point estimation of ability, the key component is the termination criterion, namely the algorithm that decides whether to classify the examinee and end the test or to continue and administer another item. This paper applies a newly suggested termination criterion, the generalized likelihood ratio (GLR, to CCT. It also explores the role of the indifference region in the specification of likelihood-ratio based termination criteria, comparing the GLR to the sequential probability ratio test. Results from simulation studies suggest that the GLR is always at least as efficient as existing methods.

PECULIAR FEATURES OF CRITERIA PERTAINING TO SMALL AND MEDIUM BUSINESS AND THEIR DIFFERENCE IN BELARUS, RUSSIA AND POLAND

Directory of Open Access Journals (Sweden)

K. P. Kozel

2009-01-01

Full Text Available There are definite criteria that help to classify individual entrepreneurs and organizations as small and medium business categories. Definition of an economic management subject as a small enterprise and an individual entrepreneur provides possibilities to obtain tax privileges and other preferences in some countries.The paper considers peculiar features of criteria that allow to define an economic management subject as a small and medium business in Belarus, Russia and Poland. Comparison has been carried out according to such criteria as average manpower, type of economic activity, annual turnover, purpose of the activity and founder staff.The comparative analysis has made it possible to reveal similar features and significant differences between criteria used for definition of small entrepreneurship in the above-mentioned countries. Corresponding conclusions in respect of Belarus are made in the paper. The paper also contains evaluation of application of some criteria in our country.

Rating of environmental criteria

Energy Technology Data Exchange (ETDEWEB)

Glueck, K; Krasser, G

1980-01-01

After a general theoretical discussion on the question of rating within a framework of cost-benefit studies, first trials as to the quantification and standardisation of twelve selected environmental criteria by means of an indicator system are worked out and compiled. The selection includes the criteria exhaust gas, dust, micro climate, water pollution, water regime, land requirement, vibrations, traffic noise, landscape scene, urban scene, effect of separation and safety risks. An insight is given of the rating practice using an evaluation of the available literature, of a household interview and of an interview of experts. The interviewing of 156 experts as to their rating conception of ten criteria in the second round has provided contributions to the general problem of the evaluation estimate based on multi criteria analysis as well as differentiation of the twelve or ten environmental criteria. The following criteria ratings given by the experts and which are averaged and smoothed are: traffic noise 20,0% +- 8,5; air pollution 15,0% +- 7,0; safety risk 13,0% +- 7,0; soil and water pollution 8,5% +- 5,0; landscape scene 8,0% +- 4,5; urban scene 8,0% +- 4,5; water regime 6,5% +- 3,5 and vibrations 4,5% +- 2,5.

Small Business Conformity with Quality Website Design Criteria in a Marketing Communication Context

Directory of Open Access Journals (Sweden)

Martine Robinson Beachboard

2017-10-01

Full Text Available Aim/Purpose: Professional companies selling persuasive-communication services via the World Wide Web need to be exemplars of effective informing practices. Their credibility is at risk if their websites do not excel in marketing message and use of medium. Their unique brands need to be expressed through website technology and content, or they cannot compete successfully. Background: Compares marketing communication consultants’ websites with expert criteria. Methodology: Content analysis of 40 advertising agency websites. Contribution: Links an evaluation of advertising agency compliance with expert website criteria to established branding constructs. Findings: Most small advertising agencies could improve their brand reputations through better compliance with experts’ recommended website design and content criteria. Recommendations for Practitioners: A hierarchy of recommendations for practitioners is offered, addressing ease and importance. Impact on Society: Clarity and credibility of message and medium improve our ability to practice effective informing. Future Research: Explore online communications of specialized populations such as digital marketing experts.

The criteria of fracture in the case of the leak of pressure vessels

Energy Technology Data Exchange (ETDEWEB)

Habil; Ziliukas, A.

1997-04-01

In order to forecast the break of the high pressure vessels and the network of pipes in a nuclear reactor, according to the concept of leak before break of pressure vessels, it is necessary to analyze the conditions of project, production, and mounting quality as well as of exploitation. It is also necessary to evaluate the process of break by the help of the fracture criteria. In the Ignalina Nuclear Power Plant of, in Lithuania, the most important objects of investigation are: the highest pressure pipes, made of Japanese steel 19MN5 and having an anticorrosive austenitic: coal inside, the pipes of distribution, which arc made of 08X1810T steel. The steel of the network of pipes has a quality of plasticity: therefore the only criteria of fragile is impossible to apply to. The process of break would be best described by the universal criteria of elastic - plastic fracture. For this purpose the author offers the criterion of the double parameter.

Rehabilitation after labral repair and femoroacetabular decompression: criteria-based progression through the return to sport phase.

Science.gov (United States)

Wahoff, Michael; Dischiavi, Steve; Hodge, Jenna; Pharez, Joseph D

2014-11-01

Rehabilitation following hip arthroscopy for femoroacetabular impingement (FAI) and labral-chondral dysfunction has evolved rapidly over the past 15 years. There have been multiple commentaries published on rehabilitation following hip arthroscopy without any published standardized objective criteria to address the advancement of the athlete through the phases of rehabilitation. The purpose of this clinical commentary is to describe a criteria driven algorithm for safe integration and return to sport rehabilitation following hip arthroscopy. The criteria based program allows for individuality of the athlete while providing guidance from early post-operative phases through late return to sport phases of rehabilitation. Emphasis is placed on the minimum criteria to advance including healing restraints, patient reported outcomes, range of motion, core and hip stability, postural control, symmetry with functional tasks and gait, strength, power, endurance, agility, and sport-specific tasks. Evidence to support the criteria will be offered as available. Despite limitations, this clinical commentary will offer a guideline for safe return to sport for the athlete while identifying areas for further investigation. 5.

Fit-for-purpose: species distribution model performance depends on evaluation criteria -Dutch hoverflies as a case study

NARCIS (Netherlands)

Aguirre-Gutiérrez, J.; Carvalheiro, L.G.; Polce, C.; van Loon, E.E.; Raes, N.; Reemer, M.; Biesmeijer, J.C.

2013-01-01

Understanding species distributions and the factors limiting them is an important topic in ecology and conservation, including in nature reserve selection and predicting climate change impacts. While Species Distribution Models (SDM) are the main tool used for these purposes, choosing the best SDM

Analysing and Comparing Encodability Criteria

Directory of Open Access Journals (Sweden)

Kirstin Peters

2015-08-01

Full Text Available Encodings or the proof of their absence are the main way to compare process calculi. To analyse the quality of encodings and to rule out trivial or meaningless encodings, they are augmented with quality criteria. There exists a bunch of different criteria and different variants of criteria in order to reason in different settings. This leads to incomparable results. Moreover it is not always clear whether the criteria used to obtain a result in a particular setting do indeed fit to this setting. We show how to formally reason about and compare encodability criteria by mapping them on requirements on a relation between source and target terms that is induced by the encoding function. In particular we analyse the common criteria full abstraction, operational correspondence, divergence reflection, success sensitiveness, and respect of barbs; e.g. we analyse the exact nature of the simulation relation (coupled simulation versus bisimulation that is induced by different variants of operational correspondence. This way we reduce the problem of analysing or comparing encodability criteria to the better understood problem of comparing relations on processes.

A Hybrid Approach Using ISM For Leveling Agile Criteria And Fuzzy AHP To Determine The Relative Weights Of Evaluation Criteria And Fuzzy TOPSIS To Rank The Alternatives

Directory of Open Access Journals (Sweden)

Mahdi Karbasian1

2012-02-01

Full Text Available In today’s organizations, performance measurement comes more to the foreground with the advancement in the high technology. Supplier selection is an important issue in supply chain management. In recent years, determining the best supplier in the supply chain has become a key strategic consideration. However, these decisions usually involve several objectives or criteria, and it is often necessary to compromise among possibly conflicting factors. Thus, the multiple criteria decision making (MCDM becomes a useful approach to solve this kind of problem. In order to use the conceptual framework for measuring performance supplier, a methodology that takes into account both quantitative and qualitative factors and the interrelations between them should be utilized. for leveling an integrated approach of analytic hierarchy process AHP and fuzzy TOPSIS method is proposed to obtain final ranking. The interactions among the criteria are also analyzed before arriving at a decision for the selection of supplier from among six alternatives. Linguistic values are used to assess the ratings and weights for criterion. These linguistic ratings can be expressed in triangular fuzzy numbers. Then, a hierarchy multiple criteria decision-making (MCDM model based on fuzzy-sets theory including FAHP and FTOPSIS are applied. There are two approaches for aggregating values including relative importance of evaluation criteria with respect to the overall objective and rating of alternatives with respect to each criterion in fuzzy group TOPSIS: First aggregation and Last aggregation. In first aggregation approach weight of each criterion and rating of alternatives with respect to each criterion gained from decision makers are aggregated at first and TOPSIS method then apply to these aggregate values. In last aggregation approach weight of each criterion and rating of alternatives with respect to each criterion gained from decision makers are used in TOPSIS method

Diagnostic Criteria for Pediatric MS

Directory of Open Access Journals (Sweden)

J Gordon Millichap

2013-06-01

Full Text Available Investigators at Northwestern University Feinberg School of Medicine and Ann & Robert H. Lurie Children’s Hospital of Chicago review the diagnostic criteria for pediatric multiple sclerosis, the differential diagnosis, the 2010 McDonald criteria, and Callen criteria.

Multi-Canister Overpack (MCO) Combustible Gas Management Leak Test Acceptance Criteria (OCRWM)

International Nuclear Information System (INIS)

SHERRELL, D.L.

2000-01-01

The purpose of this document is to support the Spent Nuclear Fuel Project's combustible gas management strategy while avoiding the need to impose any requirements for oxygen free atmospheres within storage tubes that contain multi-canister overpacks (MCO). In order to avoid inerting requirements it is necessary to establish and confirm leak test acceptance criteria for mechanically sealed and weld sealed MCOs that are adequte to ensure that, in the unlikely event the leak test results for any MCO were to approach either of those criteria, it could still be handled and stored in stagnant air without compromising the SNF Project's overall strategy to prevent accumulation of combustible gas mixtures within MCOs or within their surroundings. To support that strategy, this document: (1) establishes combustible gas management functions and minimum functional requirements for the MCO's mechanical seals and closure weld(s); (2) establishes a maximum practical value for the minimum required initial MCO inert backfill gas pressure; and (3) based on items 1 and 2, establishes and confirms leak test acceptance criteria for the MCO's mechanical seal and final closure weld(s)

Quantitative Determination of Fatty Acids in Marine Fish and Shellfish from Warm Water of Straits of Malacca for Nutraceutical Purposes

Directory of Open Access Journals (Sweden)

Nurnadia Abd Aziz

2013-01-01

Full Text Available This study was conducted to quantitatively determine the fatty acid contents of 20 species of marine fish and four species of shellfish from Straits of Malacca. Most samples contained fairly high amounts of polyunsaturated fatty acids (PUFAs, especially alpha-linolenic acid (ALA, C18:3 n3, eicosapentaenoic acid (EPA, C20:5 n3, and docosahexaenoic acid (DHA, C22:6 n3. Longtail shad, yellowstripe scad, and moonfish contained significantly higher (P<0.05 amounts of eicosapentaenoic acid (EPA, docosahexaenoic acid (DHA, and alpha-linolenic acid (ALA, respectively. Meanwhile, fringescale sardinella, malabar red snapper, black pomfret, Japanese threadfin bream, giant seaperch, and sixbar grouper showed considerably high content (537.2–944.1 mg/100g wet sample of desirable omega-3 fatty acids. The polyunsaturated-fatty-acids/saturated-fatty-acids (P/S ratios for most samples were higher than that of Menhaden oil (P/S=0.58, a recommended PUFA supplement which may help to lower blood pressure. Yellowstripe scad (highest DHA, ω-3/ω-6=6.4, P/S=1.7, moonfish (highest ALA, ω-3/ω-6=1.9, P/S=1.0, and longtail shad (highest EPA, ω-3/ω-6=0.8, P/S=0.4 were the samples with an outstandingly desirable overall composition of fatty acids. Overall, the marine fish and shellfish from the area contained good composition of fatty acids which offer health benefits and may be used for nutraceutical purposes in the future.

On the use of risk acceptance criteria in the offshore oil and gas industry

International Nuclear Information System (INIS)

Aven, Terje; Vinnem, Jan Erik

2005-01-01

Risk acceptance criteria, as upper limits of acceptable risks, have been used for offshore activities on the Norwegian Continental Shelf for more than 20 years. The common thinking has been that risk analyses and assessments cannot be conducted in a meaningful way without the use of such criteria. The ALARP principle also applies, but the risk acceptance criteria have played a more active role in the assessment processes than seen for example in the UK. Recently there has, however, been a discussion about the suitability of risk acceptance criteria to assess and control risks. The purpose of this paper is to contribute to this discussion by presenting and discussing a risk analysis regime that is not based on the use of risk acceptance criteria at all. We believe that we can do better if cost-effectiveness (in a wide sense) is the ruling thinking rather than adoption of pre-defined risk acceptance limits. This means a closer resemblance with the ALARP principle as adopted in the UK and other countries, but is not a direct application of this practice. Also the building blocks of the common way of applying the ALARP principle are reviewed. The Norwegian offshore oil and gas industry is the starting point, but the discussion is to large extent general

Proposed Diagnostic Criteria for Smartphone Addiction.

Science.gov (United States)

Lin, Yu-Hsuan; Chiang, Chih-Lin; Lin, Po-Hsien; Chang, Li-Ren; Ko, Chih-Hung; Lee, Yang-Han; Lin, Sheng-Hsuan

2016-01-01

Global smartphone penetration has led to unprecedented addictive behaviors. The aims of this study are to develop diagnostic criteria of smartphone addiction and to examine the discriminative ability and the validity of the diagnostic criteria. We developed twelve candidate criteria for characteristic symptoms of smartphone addiction and four criteria for functional impairment caused by excessive smartphone use. The participants consisted of 281 college students. Each participant was systematically assessed for smartphone-using behaviors by psychiatrist's structured diagnostic interview. The sensitivity, specificity, and diagnostic accuracy of the candidate symptom criteria were analyzed with reference to the psychiatrists' clinical global impression. The optimal model selection with its cutoff point of the diagnostic criteria differentiating the smartphone addicted subjects from non-addicted subjects was then determined by the best diagnostic accuracy. Six symptom criteria model with optimal cutoff point were determined based on the maximal diagnostic accuracy. The proposed smartphone addiction diagnostic criteria consisted of (1) six symptom criteria, (2) four functional impairment criteria and (3) exclusion criteria. Setting three symptom criteria as the cutoff point resulted in the highest diagnostic accuracy (84.3%), while the sensitivity and specificity were 79.4% and 87.5%, respectively. We suggested determining the functional impairment by two or more of the four domains considering the high accessibility and penetration of smartphone use. The diagnostic criteria of smartphone addiction demonstrated the core symptoms "impaired control" paralleled with substance related and addictive disorders. The functional impairment involved multiple domains provide a strict standard for clinical assessment.

Proposed Diagnostic Criteria for Smartphone Addiction.

Directory of Open Access Journals (Sweden)

Yu-Hsuan Lin

Full Text Available Global smartphone penetration has led to unprecedented addictive behaviors. The aims of this study are to develop diagnostic criteria of smartphone addiction and to examine the discriminative ability and the validity of the diagnostic criteria.We developed twelve candidate criteria for characteristic symptoms of smartphone addiction and four criteria for functional impairment caused by excessive smartphone use. The participants consisted of 281 college students. Each participant was systematically assessed for smartphone-using behaviors by psychiatrist's structured diagnostic interview. The sensitivity, specificity, and diagnostic accuracy of the candidate symptom criteria were analyzed with reference to the psychiatrists' clinical global impression. The optimal model selection with its cutoff point of the diagnostic criteria differentiating the smartphone addicted subjects from non-addicted subjects was then determined by the best diagnostic accuracy.Six symptom criteria model with optimal cutoff point were determined based on the maximal diagnostic accuracy. The proposed smartphone addiction diagnostic criteria consisted of (1 six symptom criteria, (2 four functional impairment criteria and (3 exclusion criteria. Setting three symptom criteria as the cutoff point resulted in the highest diagnostic accuracy (84.3%, while the sensitivity and specificity were 79.4% and 87.5%, respectively. We suggested determining the functional impairment by two or more of the four domains considering the high accessibility and penetration of smartphone use.The diagnostic criteria of smartphone addiction demonstrated the core symptoms "impaired control" paralleled with substance related and addictive disorders. The functional impairment involved multiple domains provide a strict standard for clinical assessment.

HERMES docking/berthing system pilot study. Quantitative assessment

International Nuclear Information System (INIS)

Munoz Blasco, J.; Goicoechea Sanchez, F.J.

1993-01-01

This study falls within the framework of the incorporation of quantitative risk assessment to the activities planned for the ESA-HERMES project (ESA/ CNES). The main objective behind the study was the analysis and evaluation of the potential contribution of so-called probabilistic or quantitative safety analysis to the optimization of the safety development process for the systems carrying out the safety functions required by the new and complex HERMES Space Vehicle. For this purpose, a pilot study was considered a good start in quantitative safety assessments (QSA), as this approach has been frequently used in the past to establish a solid base in large-scale QSA application programs while avoiding considerable economic risks. It was finally decided to select the HERMES docking/berthing system with Man Tender Free Flyer as the case-study. This report describes the different steps followed in the study, along with the main insights obtained and the general conclusions drawn from the study results. (author)

Comparison of two approaches for establishing performance criteria related to Maintenance Rule

International Nuclear Information System (INIS)

Jerng, Dong-Wook; Kim, Man Cheol

2015-01-01

Probabilistic safety assessment (PSA) serves as a tool for systemically analyzing the safety of nuclear power plants. This paper explains and compares two approaches for the establishment of performance criteria related to the Maintenance Rule: (1) the individual reliability-based approach, and (2) the PSA importance measure-based approach. Different characteristics of the two approaches were compared in a qualitative manner, while a quantitative comparison was performed through application of the two approaches to a nuclear power plant. It was observed that the individual reliability-based approach resulted in more conservative performance criteria, compared to the PSA importance measure-based approach. It is thus expected that the PSA importance measure-based approach will allow for more flexible maintenance policy under conditions of limited resources, while providing for a macroscopic view of overall plant safety. Based on insights derived through this analysis, we emphasize the importance of a balance between reliability and safety significance, and propose a balance measure accordingly. The conclusions of this analysis are likely to be applicable to other types of nuclear power plants. (author)

Separability criteria and method of measurement for entanglement

Science.gov (United States)

Mohd, Siti Munirah; Idrus, Bahari; Mukhtar, Muriati

2014-06-01

Quantum computers have the potentials to solve certain problems faster than classical computers. In quantum computer, entanglement is one of the elements beside superposition. Recently, with the advent of quantum information theory, entanglement has become an important resource for Quantum Information and Computation. The purpose of this paper is to discuss the separability criteria and method of measurement for entanglement. This paper is aimed at viewing the method that has been proposed in previous works in bipartite and multipartite entanglement. The outcome of this paper is to classify the different method that used to measure entanglement for bipartite and multipartite cases including the advantage and disadvantage of each method.

Separability criteria and method of measurement for entanglement

Energy Technology Data Exchange (ETDEWEB)

Mohd, Siti Munirah; Idrus, Bahari; Mukhtar, Muriati [Industrial Computing Research Group, Faculty of Information Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor (Malaysia)

2014-06-19

Quantum computers have the potentials to solve certain problems faster than classical computers. In quantum computer, entanglement is one of the elements beside superposition. Recently, with the advent of quantum information theory, entanglement has become an important resource for Quantum Information and Computation. The purpose of this paper is to discuss the separability criteria and method of measurement for entanglement. This paper is aimed at viewing the method that has been proposed in previous works in bipartite and multipartite entanglement. The outcome of this paper is to classify the different method that used to measure entanglement for bipartite and multipartite cases including the advantage and disadvantage of each method.

Separability criteria and method of measurement for entanglement

International Nuclear Information System (INIS)

Mohd, Siti Munirah; Idrus, Bahari; Mukhtar, Muriati

2014-01-01

Quantum computers have the potentials to solve certain problems faster than classical computers. In quantum computer, entanglement is one of the elements beside superposition. Recently, with the advent of quantum information theory, entanglement has become an important resource for Quantum Information and Computation. The purpose of this paper is to discuss the separability criteria and method of measurement for entanglement. This paper is aimed at viewing the method that has been proposed in previous works in bipartite and multipartite entanglement. The outcome of this paper is to classify the different method that used to measure entanglement for bipartite and multipartite cases including the advantage and disadvantage of each method

The leak before break criteria, requirements and implications; El criterio de fuga antes de ruptura, requerimientos e implicaciones

Energy Technology Data Exchange (ETDEWEB)

Martinez M, E

1992-05-15

Inside this work a general balance is made on the Leak before break approach (LBB), like they are the history and licensing, those limitations, the acceptance criteria of the LBB, the current state of the regulatory development and the current state of it application in countries like E.U.A, Germany, Canada, Italy and France. Everything it with the purpose of evaluating the opportunities that offers the LBB criteria for it possible application in Mexico. (Author)

Visual and quantitative assessment of lateral lumbar spinal canal stenosis with magnetic resonance imaging

International Nuclear Information System (INIS)

Sipola, Petri; Vanninen, Ritva; Manninen, Hannu; Leinonen, Ville; Niemelaeinen, Riikka; Aalto, Timo; Airaksinen, Olavi; Battie, Michele C.

2011-01-01

Background. Lateral lumbar spinal canal stenosis is a common etiology of lumbar radicular symptoms. Quantitative measurements have commonly demonstrated better repeatability than visual assessments. We are not aware of any studies examining the repeatability of quantitative assessment of the lateral canal. Purpose. To evaluate the repeatability of visual assessments and newly developed quantitative measurements of lateral lumbar spinal canal stenosis using magnetic resonance imaging (MRI). Material and Methods. Twenty-eight patients with lateral lumbar spinal canal stenosis or prior spinal surgery with recurrent symptoms were imaged with MRI. A radiologist, a neurosurgeon and a spine research trainee graded visually and quantitatively subarticular (n = 188) and foraminal zones (n = 260) of the lateral spinal canal. Quantitative measurements included the minimal subarticular width and the cross-sectional area of the foramen. Results. The repeatability of visual assessment at the subarticular zone and foraminal zones between raters varied from 0.45-0.59 and 0.42-0.53, respectively. Similarly, the intraclass correlation coefficients for the quantitative measurements varied from 0.67-0.71 and 0.66-0.76, respectively. The intra-rater repeatability for the visual assessments of the subarticular and foraminal zones was 0.70 and 0.62, respectively, while the corresponding intraclass correlation coefficients for quantitative measurements were 0.83 and 0.81, respectively. Conclusion. Inter-rater repeatability of visual assessments of lateral stenosis is moderate, whereas quantitative measurements of both subarticular width and the cross-sectional area of the foramen have substantial reproducibility and may be particularly useful for longitudinal studies and research purposes. The clinical value of these parameters requires further study

Visual and quantitative assessment of lateral lumbar spinal canal stenosis with magnetic resonance imaging

Energy Technology Data Exchange (ETDEWEB)

Sipola, Petri; Vanninen, Ritva; Manninen, Hannu (Univ. of Eastern Finland, Faculty of Health Sciences, School of Medicine, Inst. of Clinical Medicine, Dept. of Clinical Radiology, Kuopio (Finland); Kuopio Univ. Hospital, Clinical Imaging Centre, Dept. of Clinical Radiology, Kuopio (Finland)), email: petri.sipola@kuh.fi; Leinonen, Ville (Kuopio Univ. Hospital, Dept. of Neurosurgery, Kuopio (Finland)); Niemelaeinen, Riikka (Kuopio Univ. Hospital, Clinical Imaging Centre, Dept. of Clinical Radiology, Kuopio (Finland); Faculty of Rehabilitation Medicine, Univ. of Alberta, Edmonton, Alberta (Canada)); Aalto, Timo (Kyyhkylae Rehabilitation Center and Hospital, Mikkeli (Finland)); Airaksinen, Olavi (Kuopio Univ. Hospital, Dept. of Physical and Rehabilitation Medicine and Univ. of Eastern Finland, Faculty of Health Sciences, School of Medicine, Inst. of Clinical Medicine, Kuopio (Finland)); Battie, Michele C. (Faculty of Rehabilitation Medicine, Univ. of Alberta, Edmonton, Alberta (Canada))

2011-11-15

Background. Lateral lumbar spinal canal stenosis is a common etiology of lumbar radicular symptoms. Quantitative measurements have commonly demonstrated better repeatability than visual assessments. We are not aware of any studies examining the repeatability of quantitative assessment of the lateral canal. Purpose. To evaluate the repeatability of visual assessments and newly developed quantitative measurements of lateral lumbar spinal canal stenosis using magnetic resonance imaging (MRI). Material and Methods. Twenty-eight patients with lateral lumbar spinal canal stenosis or prior spinal surgery with recurrent symptoms were imaged with MRI. A radiologist, a neurosurgeon and a spine research trainee graded visually and quantitatively subarticular (n = 188) and foraminal zones (n = 260) of the lateral spinal canal. Quantitative measurements included the minimal subarticular width and the cross-sectional area of the foramen. Results. The repeatability of visual assessment at the subarticular zone and foraminal zones between raters varied from 0.45-0.59 and 0.42-0.53, respectively. Similarly, the intraclass correlation coefficients for the quantitative measurements varied from 0.67-0.71 and 0.66-0.76, respectively. The intra-rater repeatability for the visual assessments of the subarticular and foraminal zones was 0.70 and 0.62, respectively, while the corresponding intraclass correlation coefficients for quantitative measurements were 0.83 and 0.81, respectively. Conclusion. Inter-rater repeatability of visual assessments of lateral stenosis is moderate, whereas quantitative measurements of both subarticular width and the cross-sectional area of the foramen have substantial reproducibility and may be particularly useful for longitudinal studies and research purposes. The clinical value of these parameters requires further study

Exploring the perspectives and preferences for HTA across German healthcare stakeholders using a multi-criteria assessment of a pulmonary heart sensor as a case study.

Science.gov (United States)

Wahlster, Philip; Goetghebeur, Mireille; Schaller, Sandra; Kriza, Christine; Kolominsky-Rabas, Peter

2015-04-28

Health technology assessment and healthcare decision-making are based on multiple criteria and evidence, and heterogeneous opinions of participating stakeholders. Multi-criteria decision analysis (MCDA) offers a potential framework to systematize this process and take different perspectives into account. The objectives of this study were to explore perspectives and preferences across German stakeholders when appraising healthcare interventions, using multi-criteria assessment of a heart pulmonary sensor as a case study. An online survey of 100 German healthcare stakeholders was conducted using a comprehensive MCDA framework (EVIDEM V2.2). Participants were asked to provide i) relative weights for each criterion of the framework; ii) performance scores for a health pulmonary sensor, based on available data synthesized for each criterion; and iii) qualitative feedback on the consideration of contextual criteria. Normalized weights and scores were combined using a linear model to calculate a value estimate across different stakeholders. Differences across types of stakeholders were explored. The survey was completed by 54 participants. The most important criteria were efficacy, patient reported outcomes, disease severity, safety, and quality of evidence (relative weight >0.075 each). Compared to all participants, policymakers gave more weight to budget impact and quality of evidence. The quantitative appraisal of a pulmonary heart sensor revealed differences in scoring performance of this intervention at the criteria level between stakeholder groups. The highest value estimate of the sensor reached 0.68 (on a scale of 0 to 1, 1 representing maximum value) for industry representatives and the lowest value of 0.40 was reported for policymakers, compared to 0.48 for all participants. Participants indicated that most qualitative criteria should be considered and their impact on the quantitative appraisal was captured transparently. The study identified important

The Renewable Energy Directive: biofuels, biomass and sustainable development criteria. How to check in France the compliance of marketed biofuels with sustainability criteria defined by the Directive on renewable energies? (Phase 1: biofuels and bio-liquids); Directive Energies Renouvelables: Biocarburants, biomasse et criteres de developpement durable. Comment verifier, en France, la conformite des biocarburants mis sur le marche aux criteres de durabilite prevus par la Directive sur les energies renouvelables? (Phase 1: biocarburants et bioliquides)

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-06-15

After having recalled and commented the main principles of the European directive which sets objectives in terms of renewable energy promotion and consumption, this report analyses the quantitative and qualitative sustainability criteria which must be applied particularly to biofuels and bio-liquids produced from agricultural activities, and their application perspectives. It gives recommendations to assess these criteria. It also comments the modalities used to control the compliance of biofuels with these criteria

A Quantitative Method for Localizing User Interface Problems: The D-TEO Method

Directory of Open Access Journals (Sweden)

Juha Lamminen

2009-01-01

Full Text Available A large array of evaluation methods have been proposed to identify Website usability problems. In log-based evaluation, information about the performance of users is collected and stored into log files, and used to find problems and deficiencies in Web page designs. Most methods require the programming and modeling of large task models, which are cumbersome processes for evaluators. Also, because much statistical data is collected onto log files, recognizing which Web pages require deeper usability analysis is difficult. This paper suggests a novel quantitative method, called the D-TEO, for locating problematic Web pages. This semiautomated method explores the decomposition of interaction tasks of directed information search into elementary operations, deploying two quantitative usability criteria, search success and search time, to reveal how a user navigates within a web of hypertext.

Integrating Green Building Criteria Into Housing Design Processes Case Study: Tropical Apartment At Kebon Melati, Jakarta

Science.gov (United States)

Farid, V. L.; Wonorahardjo, S.

2018-05-01

The implementation of Green Building criteria is relatively new in architectural practice, especially in Indonesia. Consequently, the integration of these criteria into design process has the potential to change the design process itself. The implementation of the green building criteria into the conventional design process will be discussed in this paper. The concept of this project is to design a residential unit with a natural air-conditioning system. To achieve this purpose, the Green Building criteria has been implemented since the beginning of the design process until the detailing process on the end of the project. Several studies was performed throughout the design process, such as: (1) Conceptual review, where several professionally proved theories related to Tropical Architecture and passive design are used for a reference, and (2) Computer simulations, such as Computational Fluid Dynamics (CFD) and wind tunnel simulation, used to represent the dynamic response of the surrounding environment towards the building. Hopefully this paper may become a reference for designing a green residential building.

Complex pedigree analysis to detect quantitative trait loci in dairy cattle

NARCIS (Netherlands)

Bink, M.C.A.M.

1998-01-01

In dairy cattle, many quantitative traits of economic importance show phenotypic variation. For breeding purposes the analysis of this phenotypic variation and uncovering the contribution of genetic factors is very important. Usually, the individual gene effects contributing to the

Evaluating a multi-criteria model for hazard assessment in urban design. The Porto Marghera case study

International Nuclear Information System (INIS)

Luria, Paolo; Aspinall, Peter A.

2003-01-01

The aim of this paper is to describe a new approach to major industrial hazard assessment, which has been recently studied by the authors in conjunction with the Italian Environmental Protection Agency ('ARPAV'). The real opportunity for developing a different approach arose from the need of the Italian EPA to provide the Venice Port Authority with an appropriate estimation of major industrial hazards in Porto Marghera, an industrial estate near Venice (Italy). However, the standard model, the quantitative risk analysis (QRA), only provided a list of individual quantitative risk values, related to single locations. The experimental model is based on a multi-criteria approach--the Analytic Hierarchy Process--which introduces the use of expert opinions, complementary skills and expertise from different disciplines in conjunction with quantitative traditional analysis. This permitted the generation of quantitative data on risk assessment from a series of qualitative assessments, on the present situation and on three other future scenarios, and use of this information as indirect quantitative measures, which could be aggregated for obtaining the global risk rate. This approach is in line with the main concepts proposed by the last European directive on Major Hazard Accidents, which recommends increasing the participation of operators, taking the other players into account and, moreover, paying more attention to the concepts of 'urban control', 'subjective risk' (risk perception) and intangible factors (factors not directly quantifiable)

Total and isoform-specific quantitative assessment of circulating Fibulin-1 using selected reaction monitoring mass spectrometry and time-resolved immunofluorometry

DEFF Research Database (Denmark)

Overgaard, Martin; Cangemi, Claudia; Jensen, Martin L

2015-01-01

biomarker fibulin-1 and its circulating isoforms in human plasma. EXPERIMENTAL DESIGN:: We used bioinformatics analysis to predict total and isoform-specific tryptic peptides for absolute quantitation using SRM-MS. Fibulin-1 was quantitated in plasma by nanoflow-LC-SRM-MS in undepleted plasma and time......PURPOSE:: Targeted proteomics using SRM-MS combined with stable isotope dilution has emerged as a promising quantitative technique for the study of circulating protein biomarkers. The purpose of this study was to develop and characterize robust quantitative assays for the emerging cardiovascular......-resolved immunofluorometric assay (TRIFMA). Both methods were validated and compared to a commercial ELISA (CircuLex). Molecular size determination was performed under native conditions by SEC analysis coupled to SRM-MS and TRIFMA. RESULTS:: Absolute quantitation of total fibulin-1, isoforms -1C and -1D was performed by SRM...

Developing metapopulation connectivity criteria from genetic and habitat data to recover the endangered Mexican wolf.

Science.gov (United States)

Carroll, Carlos; Fredrickson, Richard J; Lacy, Robert C

2014-02-01

Restoring connectivity between fragmented populations is an important tool for alleviating genetic threats to endangered species. Yet recovery plans typically lack quantitative criteria for ensuring such population connectivity. We demonstrate how models that integrate habitat, genetic, and demographic data can be used to develop connectivity criteria for the endangered Mexican wolf (Canis lupus baileyi), which is currently being restored to the wild from a captive population descended from 7 founders. We used population viability analysis that incorporated pedigree data to evaluate the relation between connectivity and persistence for a restored Mexican wolf metapopulation of 3 populations of equal size. Decreasing dispersal rates greatly increased extinction risk for small populations (0.5 genetically effective migrants per generation may be achievable via natural dispersal under current landscape conditions. When sufficient data are available, these methods allow planners to move beyond general aspirational connectivity goals or rules of thumb to develop objective and measurable connectivity criteria that more effectively support species recovery. The shift from simple connectivity rules of thumb to species-specific analyses parallels the previous shift from general minimum-viable-population thresholds to detailed viability modeling in endangered species recovery planning. © 2013 Society for Conservation Biology.

American College of Rheumatology provisional criteria for defining clinical inactive disease in select categories of juvenile idiopathic arthritis.

Science.gov (United States)

Wallace, Carol A; Giannini, Edward H; Huang, Bin; Itert, Lukasz; Ruperto, Nicolino

2011-07-01

To prospectively validate the preliminary criteria for clinical inactive disease (CID) in patients with select categories of juvenile idiopathic arthritis (JIA). We used the process for development of classification and response criteria recommended by the American College of Rheumatology Quality of Care Committee. Patient-visit profiles were extracted from the phase III randomized controlled trial of infliximab in polyarticular-course JIA (i.e., patients considered to resemble those with select categories of JIA) and sent to an international group of expert physician raters. Using the physician ratings as the gold standard, the sensitivity and specificity were calculated using the preliminary criteria. Modifications to the criteria were made, and these were sent to a larger group of pediatric rheumatologists to determine quantitative, face, and content validity. Variables weighted heaviest by physicians when making their judgment were the number of joints with active arthritis, erythrocyte sedimentation rate (ESR), physician's global assessment, and duration of morning stiffness. Three modifications were made: the definition of uveitis, the definition of abnormal ESR, and the addition of morning stiffness. These changes did not alter the accuracy of the preliminary set. The modified criteria, termed the "criteria for CID in select categories of JIA," have excellent feasibility and face, content, criterion, and discriminant validity to detect CID in select categories of JIA. The small changes made to the preliminary criteria set did not alter the area under the receiver operating characteristic curve (0.954) or accuracy (91%), but have increased face and content validity. Copyright © 2011 by the American College of Rheumatology.

Evaluation of early imaging response criteria in glioblastoma multiforme

International Nuclear Information System (INIS)

Gladwish, Adam; Koh, Eng-Siew; Hoisak, Jeremy; Lockwood, Gina; Millar, Barbara-Ann; Mason, Warren; Yu, Eugene; Laperriere, Normand J; Ménard, Cynthia

2011-01-01

Early and accurate prediction of response to cancer treatment through imaging criteria is particularly important in rapidly progressive malignancies such as Glioblastoma Multiforme (GBM). We sought to assess the predictive value of structural imaging response criteria one month after concurrent chemotherapy and radiotherapy (RT) in patients with GBM. Thirty patients were enrolled from 2005 to 2007 (median follow-up 22 months). Tumor volumes were delineated at the boundary of abnormal contrast enhancement on T1-weighted images prior to and 1 month after RT. Clinical Progression [CP] occurred when clinical and/or radiological events led to a change in chemotherapy management. Early Radiologic Progression [ERP] was defined as the qualitative interpretation of radiological progression one month post-RT. Patients with ERP were determined pseudoprogressors if clinically stable for ≥6 months. Receiver-operator characteristics were calculated for RECIST and MacDonald criteria, along with alternative thresholds against 1 year CP-free survival and 2 year overall survival (OS). 13 patients (52%) were found to have ERP, of whom 5 (38.5%) were pseudoprogressors. Patients with ERP had a lower median OS (11.2 mo) than those without (not reached) (p < 0.001). True progressors fared worse than pseudoprogressors (median survival 7.2 mo vs. 19.0 mo, p < 0.001). Volume thresholds performed slightly better compared to area and diameter thresholds in ROC analysis. Responses of > 25% in volume or > 15% in area were most predictive of OS. We show that while a subjective interpretation of early radiological progression from baseline is generally associated with poor outcome, true progressors cannot be distinguished from pseudoprogressors. In contrast, the magnitude of early imaging volumetric response may be a predictive and quantitative metric of favorable outcome

Operation Iraqi Freedom 04 - 06: Opportunities to Apply Quantitative Methods to Intelligence Analysis

National Research Council Canada - National Science Library

Hansen, Eric C

2005-01-01

The purpose of this presentation is to illustrate the need for a quantitative analytical capability within organizations and staffs that provide intelligence analysis to Army, Joint, and Coalition Force headquarters...

Benchmarking criteria for evaluating third-party logistics providers in South Africa

Directory of Open Access Journals (Sweden)

Claudia Karrapan

2017-07-01

Full Text Available Background: In South Africa, deemed the ‘gateway to Africa’, there is limited evidence of the existence of a survey ranking third-party logistics providers (3PLs. This lack of comparative information of the major 3PLs based on key outsourcing and ranking criteria complicates the selection process for companies that intend to contract 3PLs. Objective: The purpose of this article was to determine the critical selection and ranking criteria for the creation of an index to evaluate 3PLs in South Africa for developing a 3PL benchmarking index. Method: Survey data were collected from 103 of the Top 500 Companies in Africa that use 3PLs and operate within the sectors that mostly outsource logistics services in South Africa. A factor analysis method was employed. Results: Three factors for 3PLs selection converged: service quality, information management and compliance, and collaboration. The top three ranked categories for 3PLs selection are cost and price structure, service delivery and the relationship with the 3PL provider. Most respondents (90% confirmed a need for a 3PLs index in South Africa. Conclusion: The results help managers with the strategic selection of 3PLs as these critical logistics outsourcing selection criteria can be used to evaluate and rank 3PLs prior to contracting. Based on the selection criteria for logistics outsourcing identified and ranked in this article, a ranking index for 3PLs in South Africa can be developed.

Cost of implementing AECB interim criteria for the closeout of uranium tailings sites

International Nuclear Information System (INIS)

1981-04-01

The main purpose of this study was to arrive at a gross approximation of the costs to the Canadian uranium mining industry of meeting the proposed closeout criteria established by the Atomic Energy Control Board for tailings deposits. Two options have been investigated: on-land disposal and underlake disposal. Given the budget allocated to the study, the estimates must be understood as approximations. Overall cost figures for the Canadian uranium mining industry are linear extensions from a hypothetical base case. The results of a conference held in Ottawa on February 25 and 26 to discuss the proposed AECB interim criteria for the closeout of uranium tailings sites are also included. Representatives from mining firms, provincial regulatory authorities, universities and the Atomic Energy Control board attended the conference

Development of diagnostic criteria for serious non-AIDS events in HIV clinical trials

DEFF Research Database (Denmark)

Lifson, Alan R; Belloso, Waldo H; Davey, Richard T

2010-01-01

PURPOSE: Serious non-AIDS (SNA) diseases are important causes of morbidity and mortality in the HAART era. We describe development of standard criteria for 12 SNA events for Endpoint Review Committee (ERC) use in START, a multicenter international HIV clinical trial. METHODS: SNA definitions were...... was reached. CONCLUSION: HIV clinical trials that include SNA diseases as clinical outcomes should have standardized SNA definitions to optimize event reporting and validation and should have review by an experienced ERC with opportunities for adjudication......., peripheral arterial disease, pulmonary embolism, and stroke. Of 563 potential SNA events reported in ESPRIT and reviewed by an ERC, 72% met "confirmed" and 13% "probable" criteria. Twenty-eight percent of cases initially reviewed by the ERC required follow-up discussion (adjudication) before a final decision...

Simulation and the Development of Clinical Judgment: A Quantitative Study

Science.gov (United States)

Holland, Susan

2015-01-01

The purpose of this quantitative pretest posttest quasi-experimental research study was to explore the effect of the NESD on clinical judgment in associate degree nursing students and compare the differences between groups when the Nursing Education Simulation Design (NESD) guided simulation in order to identify educational strategies promoting…

Influence of local regulations on TN dual purpose BWR casks

International Nuclear Information System (INIS)

Samson, P.; Neider, T.

1999-01-01

Transnucleaire (Paris, France) and Transnuclear, Inc. (Hawthorne, New York, United Sates) have both developed Pressurized Water Reactor (PWR) spent fuel casks for storage and transport purposes. The products are supplied in Europe by Transnucleaire and in the United States by Transnuclear, Inc. Now the TN Group is working on a design for Boiling Water Reactor (BWR) spent fuel assemblies: the TN 52 L cask is designed for transport and storage is Switzerland, the TN 68 cask is designed for transport and storage in the United States. For storage purpose, national regulatory requirements have to be met: each country has specific demands and criteria. As a consequence, differences between the TN 52 L design and the TN 68 design for rather similar contents appear in several fields: the design work, the licensing process, the manufacturing and the operational life. (author)

Dual Criteria Decisions

DEFF Research Database (Denmark)

Andersen, Steffen; Harrison, Glenn W.; Lau, Morten Igel

2014-01-01

The most popular models of decision making use a single criterion to evaluate projects or lotteries. However, decision makers may actually consider multiple criteria when evaluating projects. We consider a dual criteria model from psychology. This model integrates the familiar tradeoffs between...... to the clear role that income thresholds play in such decision making, but does not rule out a role for tradeoffs between risk and utility or probability weighting....

Quantitative and statistical approaches to geography a practical manual

CERN Document Server

Matthews, John A

2013-01-01

Quantitative and Statistical Approaches to Geography: A Practical Manual is a practical introduction to some quantitative and statistical techniques of use to geographers and related scientists. This book is composed of 15 chapters, each begins with an outline of the purpose and necessary mechanics of a technique or group of techniques and is concluded with exercises and the particular approach adopted. These exercises aim to enhance student's ability to use the techniques as part of the process by which sound judgments are made according to scientific standards while tackling complex problems. After a brief introduction to the principles of quantitative and statistical geography, this book goes on dealing with the topics of measures of central tendency; probability statements and maps; the problem of time-dependence, time-series analysis, non-normality, and data transformations; and the elements of sampling methodology. Other chapters cover the confidence intervals and estimation from samples, statistical hy...

Standardizing the evaluation criteria on treatment outcomes of mandibular implant overdentures: a systematic review

Science.gov (United States)

Kim, Ha-Young; Shin, Sang-Wan

2014-01-01

PURPOSE The aim of this review was to analyze the evaluation criteria on mandibular implant overdentures through a systematic review and suggest standardized evaluation criteria. MATERIALS AND METHODS A systematic literature search was conducted by PubMed search strategy and hand-searching of relevant journals from included studies considering inclusion and exclusion criteria. Randomized clinical trials (RCT) and clinical trial studies comparing attachment systems on mandibular implant overdentures until December, 2011 were selected. Twenty nine studies were finally selected and the data about evaluation methods were collected. RESULTS Evaluation criteria could be classified into 4 groups (implant survival, peri-implant tissue evaluation, prosthetic evaluation, and patient satisfaction). Among 29 studies, 21 studies presented implant survival rate, while any studies reporting implant failure did not present cumulative implant survival rate. Seventeen studies evaluating peri-implant tissue status presented following items as evaluation criteria; marginal bone level (14), plaque Index (13), probing depth (8), bleeding index (8), attachment gingiva level (8), gingival index (6), amount of keratinized gingiva (1). Eighteen studies evaluating prosthetic maintenance and complication also presented following items as evaluation criteria; loose matrix (17), female detachment (15), denture fracture (15), denture relining (14), abutment fracture (14), abutment screw loosening (11), and occlusal adjustment (9). Atypical questionnaire (9), Visual analog scales (VAS) (4), and Oral Health Impact Profile (OHIP) (1) were used as the format of criteria to evaluate patients satisfaction in 14 studies. CONCLUSION For evaluation of implant overdenture, it is necessary to include cumulative survival rate for implant evaluation. It is suggested that peri-implant tissue evaluation criteria include marginal bone level, plaque index, bleeding index, probing depth, and attached gingiva

Method for the quantitation of steroids in umbilical cord plasma

International Nuclear Information System (INIS)

Schindler, A.E.; Sparke, H.

1975-01-01

A method for simultaneous quantitation of nine steroids in cord plasma is described which consisted of Amberlite XAD-2 column chromatography at constant temperature of 45 degC, enzyme hydrolysis with β-glucoronidase/aryl sulfatase, addition of five radioactive internal standards, ethyl acetate extraction, thin-layer chromatography and quantitation by gas-liquid chromatography after trimethylsilyl ether derivative formation. Reliability criteria were established and the following steroid concentrations found: progesterone, 132.1+-102.5 μg/100 ml; pregnenolone, 57.3+-45.7 μg/100 ml; dehydroepiandrosterone, 46.5+-29.4 μg/100 ml; pregnanediol, 67.5+-46.6 μg/100 ml; 16-ketoandrostenediol, 19.8+-13.7 μg/100 ml; 16 α-hydroxydehydroepiandrosterone, 126.3+-86.9 μg/100 ml; 16 α-hydroxypregnenolone, 78.2+-56.5 μg/100 ml; androstenetriol, 22.2+-17.5 μg/100 ml and oestriol, 127.7+-116.9 μg/100 ml. (author)

Failure Criteria for Reinforced Materials

DEFF Research Database (Denmark)

Rathkjen, Arne

Failure of materials is often characterized as ductile yielding, brittle fracture, creep rupture, etc., and different criteria given in terms of different parameters have been used to describe different types of failure. Only criteria expressing failure in terms of stress are considered in what...... place until the matrix, the continuous component of the composite, fails. When an isotropic matrix is reinforced as described above, the result is an anisotropic composite material. Even if the material is anisotropic, it usually exhibits a rather high degree of symmetry and such symmetries place...... certain restrictions on the form of the failure criteria for anisotropic materials. In section 2, some failure criteria for homogenous materials are reviewed. Both isotropic and anisotropic materials are described, and in particular the constraints imposed on the criteria from the symmetries orthotropy...

Validation of revised Epstein's criteria for insignificant prostate cancer prediction in a Greek subpopulation.

Science.gov (United States)

Chondros, Κ; Karpathakis, Ν; Heretis, Ι; Mavromanolakis, Ε; Chondros, N; Sofras, F; Mamoulakis, C

2015-01-01

Different treatment options for patients with prostate cancer (PCa) are applicable after stratifying patients according to various classification criteria. The purpose of our study is to evaluate the revised Epstein's criteria for insignificant PCa prediction in a Greek subpopulation. During a 4-year-period, 172 Cretan patients were submitted to radical retropubic prostatectomy in our institution. 23 out of them met the revised Epstein's criteria for the presence of clinically insignificant PCa (clinical stage T1c, prostate specific antigen density < 0.15 ng/ml/g, absence of Gleason pattern 4-5, <3 positive biopsy cores, presence of <50% tumor per core) during pre-treatment evaluation and were retrospectively included in the study. Post-surgery outcomes were evaluated including pathological stage, surgical margins and Gleason score upgrade. Organ confined disease and insignificant PCa were predicted with a 74% and 31% accuracy, respectively. These figures are remarkably lower than those derived from similar studies worldwide. Due to the high variation in the revised Epstein's criteria prediction accuracy observed worldwide, the development and implementation of novel tools/nomograms with a greater predictive accuracy is still warranted. Hippokratia 2015, 19 (1): 30-33.

Criteria adopted by dentists to indicate the extraction of periodontally involved teeth

Directory of Open Access Journals (Sweden)

Carlos Heitor Cunha Moreira

2007-10-01

Full Text Available When dealing with patients with periodontal disease of variable severities, dentists must often choose between treating and restoring the involved tooth or indicating its extraction. Different criteria have been adopted in this decision-making process. The purpose of this study was to evaluate the criteria adopted by dentists to indicate the extraction of teeth with periodontitis. Dentists were interviewed at their private practices in three cities of the state of Rio Grande do Sul, Brazil. The evaluated criteria included severity of attachment loss, tooth mobility, furcation involvement, prosthetic planning, periodontal-endodontic lesion, possible systemic involvement due to the presence of periodontitis, referral to a periodontist for evaluation, radiographic bone loss greater than 50%, presence of extensive caries, socio-economic and cultural status of the patient, among others. The most often adopted criteria to indicate the extraction of periodontally affected teeth were the presence of mobility (37.5%, severity of attachment loss (24.3% and radiographic bone loss greater than 50% (21.2%. The results of the present study demonstrated the difficulties faced by dentists to indicate the extraction of teeth with severe attachment loss, in addition to the establishment of an adequate prognosis. Aspects associated with the past disease were still the most often reported to indicate the extraction of teeth for periodontal reasons.

Defining criteria related to wastes for use in multi-criteria decision tool for nuclear accidents

Energy Technology Data Exchange (ETDEWEB)

Silva, Diogo N.G.; Guimaraes, Jean R.D., E-mail: dneves@biof.ufrj.br, E-mail: jeanrdg@biof.ufrj.br [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Instituto de Biofisica Carlos Chagas Filho; Rochedo, Elaine R.R.; De Luca, Christiano, E-mail: elainerochedo@gmail.com, E-mail: christiano_luca@hotmail.com [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear; Rochedo, Pedro R.R., E-mail: rochedopedro@gmail.com [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Instituto Alberto Luiz Coimbra de Pos-Graduacao e Pesquisa de Engenharia

2013-07-01

The selection of protective measures and strategies for remediation of contaminated areas after a nuclear accident must be based on previously established criteria in order to prevent stress of the population and the unnecessary exposure of workers. After a nuclear accident resulting in environmental contamination, decisions on remediation of areas is complex due to the large numbers of factors involved in decontamination processes. This work is part of a project which aims to develop a multi-criteria tool to support a decision-making process in cases of a radiological or a nuclear accident in Brazil. First, a database of remediation strategies for contaminated areas was created. In this process, the most relevant aspects for the implementation of these strategies were considered, including technical criteria regarding aspects related to the generation of wastes in a reference urban area, which are discussed in this paper. The specific objective of this study is to define criteria for the aspects of radioactive wastes, resulted by the implementation of some urban measures, in order to be incorporated in a multi-criteria decision tool. Main aspects considered were the type, the amount and the type of treatment necessary for each procedure. The decontamination procedures are then classified according to the selected criteria in order to feed the multi-criteria decision tool. This paper describes the steps for the establishment of these criteria and evaluates the potential for future applications in order to improve predictions and to support the decisions to be made. (author)

Defining criteria related to wastes for use in multi-criteria decision tool for nuclear accidents

International Nuclear Information System (INIS)

Silva, Diogo N.G.; Guimaraes, Jean R.D.; Rochedo, Elaine R.R.; De Luca, Christiano; Rochedo, Pedro R.R.

2013-01-01

The selection of protective measures and strategies for remediation of contaminated areas after a nuclear accident must be based on previously established criteria in order to prevent stress of the population and the unnecessary exposure of workers. After a nuclear accident resulting in environmental contamination, decisions on remediation of areas is complex due to the large numbers of factors involved in decontamination processes. This work is part of a project which aims to develop a multi-criteria tool to support a decision-making process in cases of a radiological or a nuclear accident in Brazil. First, a database of remediation strategies for contaminated areas was created. In this process, the most relevant aspects for the implementation of these strategies were considered, including technical criteria regarding aspects related to the generation of wastes in a reference urban area, which are discussed in this paper. The specific objective of this study is to define criteria for the aspects of radioactive wastes, resulted by the implementation of some urban measures, in order to be incorporated in a multi-criteria decision tool. Main aspects considered were the type, the amount and the type of treatment necessary for each procedure. The decontamination procedures are then classified according to the selected criteria in order to feed the multi-criteria decision tool. This paper describes the steps for the establishment of these criteria and evaluates the potential for future applications in order to improve predictions and to support the decisions to be made. (author)

Definitions and validation criteria for biomarkers and surrogate endpoints: development and testing of a quantitative hierarchical levels of evidence schema

DEFF Research Database (Denmark)

Lassere, Marissa N; Johnson, Kent R; Boers, Maarten

2007-01-01

endpoints, and leading indicators, a quantitative surrogate validation schema was developed and subsequently evaluated at a stakeholder workshop. RESULTS: The search identified several classification schema and definitions. Components of these were incorporated into a new quantitative surrogate validation...... level of evidence schema that evaluates biomarkers along 4 domains: Target, Study Design, Statistical Strength, and Penalties. Scores derived from 3 domains the Target that the marker is being substituted for, the Design of the (best) evidence, and the Statistical strength are additive. Penalties...... of the National Institutes of Health definitions of biomarker, surrogate endpoint, and clinical endpoint was useful. CONCLUSION: Further development and application of this schema provides incentives and guidance for effective biomarker and surrogate endpoint research, and more efficient drug discovery...

Comparing new diagnostic criteria of 2010 ACR/EULAR with 1987 ACR criteria in rheumatoid arthritis

Directory of Open Access Journals (Sweden)

Fatemeh Shirani

2017-01-01

Full Text Available Background: Rheumatoid Arthritis (RA is a chronic inflammatory disease presenting with inflammation, tenderness and destruction of the synovial joints, resulting in severe disability and early death due to complication of disease. Previous diagnostic criteria are not useful for identifying patients who need early treatment. Thus, new diagnostic criteria for faster diagnosis of disease are introduced in 2010. The aim of this study was to compared 1987 ACR (American College of Rheumatology criteria and 2010 ACR/EULAR (European League Against Rheumatism classification criteria for diagnosis of rheumatoid arthritis. Methods: In this Cohort prospective study, patients with early arthritis were evaluated   according to the old and new diagnostic criteria and followed-up every two monthly for one year (2012-2013 in Hazrat-e Rasool University Hospital, Tehran. Inclusion criteria of this study were age more than 18 year and indefinite diagnosis of arthritis. For all of patients physical examination by expert rheumatologist was done and lab data include erythrocyte sedimentation rate (ESR, C-reactive protein (CRP, anti-cyclic citrullinated peptide (Anti-CCP and rheumatoid factor was requested. The sensitivity, specificity, positive and negative predictive values were then determined for each diagnostic criteria. Results: In this study 104 patients including 28 males (26.9% and 76 females (73.1% with the mean age of 44.2±13.7 years were included. At the end of one year follow-up, 82 were diagnosed to have RA while other 22 patients were not categorized as RA. Sensitivity for ESR, CRP, Anti-CCP and rheumatoid factor in 2010 ACR/EULAR criteria was 52%, 19%, 48%, 28% and specificity for them was 45%, 71%, 27%, 79% respectively. Number of small and large joint arthritis were more in patients with Rheumatoid Arthritis (RA rather than other arthritis (P=0.0001. Sensitivity and specificity for small joints involvement was 87% and 54% and for large joints

Evaluation of different sampling methods and criteria for diagnosing canine urinary tract infection by quantitative bacterial culture

DEFF Research Database (Denmark)

Sørensen, Tina Møller; Jensen, A.B.; Damborg, Peter Panduro

2016-01-01

)/mL. Voided specimens were compared to cystocentesis using: (1) the veterinary cut-off of ≥100,000 CFU/mL; and (2) various cut-offs depending on qualitative criteria (sex, clinical signs and complicating factors), adapted from human guidelines. Ninety-four dogs with suspected urinary tract infection (UTI...... and specificity of 97% (95% CI 0.86, 1.00) and 86% (95% CI 0.77, 0.92), respectively. The veterinary cut-off value of ≥100,000 CFU/mL for voided urine is appropriate for determining significant bacteriuria in the majority of dogs with suspected UTI if specimens are refrigerated and cultured on the day...

Multi-criteria decision analysis: Limitations, pitfalls, and practical difficulties

Energy Technology Data Exchange (ETDEWEB)

Kujawski, Edouard

2003-02-01

The 2002 Winter Olympics women's figure skating competition is used as a case study to illustrate some of the limitations, pitfalls, and practical difficulties of Multi-Criteria Decision Analysis (MCDA). The paper compares several widely used models for synthesizing the multiple attributes into a single aggregate value. The various MCDA models can provide conflicting rankings of the alternatives for a common set of information even under states of certainty. Analysts involved in MCDA need to deal with the following challenging tasks: (1) selecting an appropriate analysis method, and (2) properly interpreting the results. An additional trap is the availability of software tools that implement specific MCDA models that can beguile the user with quantitative scores. These conclusions are independent of the decision domain and they should help foster better MCDA practices in many fields including systems engineering trade studies.

The ecological impacts of primary education facilities based on a child-friendly neighborhood unit criteria in Surakarta

Science.gov (United States)

Rini, E. F.; Putri, R. A.; Mulyanto; Handayani, N.

2018-03-01

A city should accommodate the citizen needs, especially for children. The absence of elementary school in a neighborhood unit (NU) will increase the use of transportation by children in the NU, every day at the same time. This activity will produce large quantities of - carbon dioxide (CO2) that can trigger climate change. This article aims at discovering the ecological impacts of CO2 emitted from the transportation used by children when commuting to their school, based on the conformity of each NU to the criteria of the a child-friendly city. Quantitative and spatial analysis techniques were employed in these four stages: (1) dividing the NU; (2) constructing the NU’s typology based on a child-friendly criteria; (3) identifying the characteristic of children movements in each NU when accessing their elementary school; and (4) analyzing the ecological impacts (in CO2 form). The result shows that 88.14% of CO2 emissions in Surakarta can be reduced by interventions through the fulfillment of all NU’s child-friendly criterias.

General-purpose chemical analyzer for on-line analyses of radioactive solutions

International Nuclear Information System (INIS)

Spencer, W.A.; Kronberg, J.W.

1983-01-01

An automated analyzer is being developed to perform analytical measurements on radioactive solutions on-line in a hostile environment. This General Purpose Chemical Analyzer (GPCA) samples a process stream, adds reagents, measures solution absorbances or electrode potentials, and automatically calculates the results. The use of modular components, under microprocessor control, permits a single analyzer design to carry out many types of analyses. This paper discusses the more important design criteria for the GPCA, and describes the equipment being tested in a prototype unit

Development of a multi-criteria assessment model for ranking of renewable and non-renewable transportation fuel vehicles

International Nuclear Information System (INIS)

Safaei Mohamadabadi, H.; Tichkowsky, G.; Kumar, A.

2009-01-01

Several factors, including economical, environmental, and social factors, are involved in selection of the best fuel-based vehicles for road transportation. This leads to a multi-criteria selection problem for multi-alternatives. In this study, a multi-criteria assessment model was developed to rank different road transportation fuel-based vehicles (both renewable and non-renewable) using a method called Preference Ranking Organization Method for Enrichment and Evaluations (PROMETHEE). This method combines qualitative and quantitative criteria to rank various alternatives. In this study, vehicles based on gasoline, gasoline-electric (hybrid), E85 ethanol, diesel, B100 biodiesel, and compressed natural gas (CNG) were considered as alternatives. These alternatives were ranked based on five criteria: vehicle cost, fuel cost, distance between refueling stations, number of vehicle options available to the consumer, and greenhouse gas (GHG) emissions per unit distance traveled. In addition, sensitivity analyses were performed to study the impact of changes in various parameters on final ranking. Two base cases and several alternative scenarios were evaluated. In the base case scenario with higher weight on economical parameters, gasoline-based vehicle was ranked higher than other vehicles. In the base case scenario with higher weight on environmental parameters, hybrid vehicle was ranked first followed by biodiesel-based vehicle

Development of a multi-criteria assessment model for ranking of renewable and non-renewable transportation fuel vehicles

Energy Technology Data Exchange (ETDEWEB)

Safaei Mohamadabadi, H.; Tichkowsky, G.; Kumar, A. [Department of Mechanical Engineering, University of Alberta, Edmonton, Alberta (Canada)

2009-01-15

Several factors, including economical, environmental, and social factors, are involved in selection of the best fuel-based vehicles for road transportation. This leads to a multi-criteria selection problem for multi-alternatives. In this study, a multi-criteria assessment model was developed to rank different road transportation fuel-based vehicles (both renewable and non-renewable) using a method called Preference Ranking Organization Method for Enrichment and Evaluations (PROMETHEE). This method combines qualitative and quantitative criteria to rank various alternatives. In this study, vehicles based on gasoline, gasoline-electric (hybrid), E85 ethanol, diesel, B100 biodiesel, and compressed natural gas (CNG) were considered as alternatives. These alternatives were ranked based on five criteria: vehicle cost, fuel cost, distance between refueling stations, number of vehicle options available to the consumer, and greenhouse gas (GHG) emissions per unit distance traveled. In addition, sensitivity analyses were performed to study the impact of changes in various parameters on final ranking. Two base cases and several alternative scenarios were evaluated. In the base case scenario with higher weight on economical parameters, gasoline-based vehicle was ranked higher than other vehicles. In the base case scenario with higher weight on environmental parameters, hybrid vehicle was ranked first followed by biodiesel-based vehicle. (author)

Evaluation of viscoplastic fracture criteria and analysis methods

International Nuclear Information System (INIS)

Bass, B.R.; Pugh, C.E.; Keeney-Walker, J.; Dexter, R.J.; O'Donoghue, P.E.; Schwartz, C.W.

1988-01-01

The role of nonlinear rate-dependent effects in the interpretation of crack run-arrest events in ductile materials is being investigated by the Heavy-Section Steel Technology (HSST) program through development and applications of viscoplastic-dynamic finite element analysis techniques. This paper describes a portion of these studies wherein various viscoplastic constitutive models and several proposed nonlinear fracture criteria are being installed in general purpose (ADINA) and special purpose (VISCRK) finite element computer programs. The formulations of the Bodner-Partom, the Perzyna, and the Robinson constitutive models installed in the HSST computer programs are summarized. This is followed by a description of three integral functions that are candidate fracture parameters. The capabilities of these nonlinear techniques re compared and evaluated through applications to one of the HSST wide-plate crack-arrest tests. Results are presented from benchmark viscoplastic-dynamic wide-plate analyses performed using the ADINA and VISCRK computer programs. Finally, plans are summarized for additional computational and experimental studies to assess the utility of viscoplastic analysis techniques in constructing a transferable inelastic fracture mechanics model for ductile steels. (author)

Improved Criteria on Delay-Dependent Stability for Discrete-Time Neural Networks with Interval Time-Varying Delays

Directory of Open Access Journals (Sweden)

O. M. Kwon

2012-01-01

Full Text Available The purpose of this paper is to investigate the delay-dependent stability analysis for discrete-time neural networks with interval time-varying delays. Based on Lyapunov method, improved delay-dependent criteria for the stability of the networks are derived in terms of linear matrix inequalities (LMIs by constructing a suitable Lyapunov-Krasovskii functional and utilizing reciprocally convex approach. Also, a new activation condition which has not been considered in the literature is proposed and utilized for derivation of stability criteria. Two numerical examples are given to illustrate the effectiveness of the proposed method.

Proposed quantitative approach to safety for nuclear power plants in Canada

International Nuclear Information System (INIS)

1995-07-01

A set of quantitative risk and frequency limits plus required processes is proposed to help ensure that a nuclear power plant in Canada meets the qualitative safety objectives defined in ACNS-2 and in IAEA 75-INSAG-3. As emphasized in this report, risks and hence doses are to be reduced below the limits using ALARA (As Low as Reasonably Achievable, economic and social factors being taken into account) or VIA (value-impact analysis) processes unless, in general, calculated risks and hence doses are below recommended de minimis levels. An updated version of ACNS-4, which will be issued as ACNS-21, will incorporate a statement of these limits and objectives as well as assessment criteria and procedures that will facilitate their application. The quantitative approach proposed here is consistent with a growing consensus on the need for, and the elements of, a quantitative approach to risk management of all major activities in an advanced industrial society. The ACNS recommends that the Atomic Energy Control Board adopt the proposed approach as a rational and coherent basis for nuclear power plant safety policy and requirements in Canada. (author). 68 refs., 4 tabs., 1 fig

Proposed quantitative approach to safety for nuclear power plants in Canada

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-07-01

A set of quantitative risk and frequency limits plus required processes is proposed to help ensure that a nuclear power plant in Canada meets the qualitative safety objectives defined in ACNS-2 and in IAEA 75-INSAG-3. As emphasized in this report, risks and hence doses are to be reduced below the limits using ALARA (As Low as Reasonably Achievable, economic and social factors being taken into account) or VIA (value-impact analysis) processes unless, in general, calculated risks and hence doses are below recommended de minimis levels. An updated version of ACNS-4, which will be issued as ACNS-21, will incorporate a statement of these limits and objectives as well as assessment criteria and procedures that will facilitate their application. The quantitative approach proposed here is consistent with a growing consensus on the need for, and the elements of, a quantitative approach to risk management of all major activities in an advanced industrial society. The ACNS recommends that the Atomic Energy Control Board adopt the proposed approach as a rational and coherent basis for nuclear power plant safety policy and requirements in Canada. (author). 68 refs., 4 tabs., 1 fig.

A Bayesian approach to the evaluation of risk-based microbiological criteria for Campylobacter in broiler meat

DEFF Research Database (Denmark)

Ranta, Jukka; Lindqvist, Roland; Hansson, Ingrid

2015-01-01

Shifting from traditional hazard-based food safety management toward risk-based management requires statistical methods for evaluating intermediate targets in food production, such as microbiological criteria (MC), in terms of their effects on human risk of illness. A fully risk-based evaluation...... of MC involves several uncertainties that are related to both the underlying Quantitative Microbiological Risk Assessment (QMRA) model and the production-specific sample data on the prevalence and concentrations of microbes in production batches. We used Bayesian modeling for statistical inference...

On the usability of quantitative modelling in operations strategy decission making

NARCIS (Netherlands)

Akkermans, H.A.; Bertrand, J.W.M.

1997-01-01

Quantitative modelling seems admirably suited to help managers in their strategic decision making on operations management issues, but in practice models are rarely used for this purpose. Investigates the reasons why, based on a detailed cross-case analysis of six cases of modelling-supported

Quantitative assessment of isolated rapid eye movement (REM) sleep without atonia without clinical REM sleep behavior disorder: clinical and research implications.

Science.gov (United States)

Sasai-Sakuma, Taeko; Frauscher, Birgit; Mitterling, Thomas; Ehrmann, Laura; Gabelia, David; Brandauer, Elisabeth; Inoue, Yuichi; Poewe, Werner; Högl, Birgit

2014-09-01

Rapid eye movement (REM) sleep without atonia (RWA) is observed in some patients without a clinical history of REM sleep behavior disorder (RBD). It remains unknown whether these patients meet the refined quantitative electromyographic (EMG) criteria supporting a clinical RBD diagnosis. We quantitatively evaluated EMG activity and investigated its overnight distribution in patients with isolated qualitative RWA. Fifty participants with an incidental polysomnographic finding of RWA (isolated qualitative RWA) were included. Tonic, phasic, and 'any' EMG activity during REM sleep on PSG were quantified retrospectively. Referring to the quantitative cut-off values for a polysomnographic diagnosis of RBD, 7/50 (14%) and 6/50 (12%) of the patients showed phasic and 'any' EMG activity in the mentalis muscle above the respective cut-off values. No patient was above the cut-off value for tonic EMG activity or phasic EMG activity in the anterior tibialis muscles. Patients with RWA above the cut-off value showed higher amounts of RWA during later REM sleep periods. This is the first study showing that some subjects with incidental RWA meet the refined quantitative EMG criteria for a diagnosis of RBD. Future longitudinal studies must investigate whether this subgroup with isolated qualitative RWA is at an increased risk of developing fully expressed RBD and/or neurodegenerative disease. Copyright © 2014 Elsevier B.V. All rights reserved.

Improved Prioritization Criteria for Road Infrastructure Projects

Directory of Open Access Journals (Sweden)

Ionescu Heroiu Marcel

2016-12-01

Full Text Available This report’s main aim is to propose a methodology for assessing state-budget-funded projects based on a rigorous selection model, including clear and effective prioritization criteria. This report first argues that project prioritization and selection should be optimized against four dimensions: absorption, impact, legitimacy, and capacity. Second, it provides a diagnostic of the National Program for Local Development (PNDL, managed by the Ministry of Regional Development and Public Administration (MRDPA, as the most significant source of state-budget funding for local infrastructure projects. The PNDL’s current design and implementation leaves room for improvement, as reflected by the lack of strategic direction in allocating funds and the continued rise in the number of projects that get started without a feasible timeline for their completion. Further, this report makes recommendations for improvement of project evaluation and selection procedures for local infrastructure development projects, with a special focus on prioritization criteria and viable funding sources for each type of investment. The practical purpose is to enhance the efficiency and effectiveness of proposed investments, maximizing impact in the context of inherently limited available financial resources. A complementary focus is on opportunities for harmonizing and better coordinating investments across various sources of funding, in the context of nearly EUR 40 billion available to Romania from the EU for the 2014-2020 programming period.

Definitions and validation criteria for biomarkers and surrogate endpoints: development and testing of a quantitative hierarchical levels of evidence schema

DEFF Research Database (Denmark)

Lassere, Marissa N; Johnson, Kent R; Boers, Maarten

2007-01-01

endpoints, and leading indicators, a quantitative surrogate validation schema was developed and subsequently evaluated at a stakeholder workshop. RESULTS: The search identified several classification schema and definitions. Components of these were incorporated into a new quantitative surrogate validation...... of the National Institutes of Health definitions of biomarker, surrogate endpoint, and clinical endpoint was useful. CONCLUSION: Further development and application of this schema provides incentives and guidance for effective biomarker and surrogate endpoint research, and more efficient drug discovery...... are then applied if there is serious counterevidence. A total score (0 to 15) determines the level of evidence, with Level 1 the strongest and Level 5 the weakest. It was proposed that the term "surrogate" be restricted to markers attaining Levels 1 or 2 only. Most stakeholders agreed that this operationalization...

Criteria to Extract High-Quality Protein Data Bank Subsets for Structure Users.

Science.gov (United States)

Carugo, Oliviero; Djinović-Carugo, Kristina

2016-01-01

It is often necessary to build subsets of the Protein Data Bank to extract structural trends and average values. For this purpose it is mandatory that the subsets are non-redundant and of high quality. The first problem can be solved relatively easily at the sequence level or at the structural level. The second, on the contrary, needs special attention. It is not sufficient, in fact, to consider the crystallographic resolution and other feature must be taken into account: the absence of strings of residues from the electron density maps and from the files deposited in the Protein Data Bank; the B-factor values; the appropriate validation of the structural models; the quality of the electron density maps, which is not uniform; and the temperature of the diffraction experiments. More stringent criteria produce smaller subsets, which can be enlarged with more tolerant selection criteria. The incessant growth of the Protein Data Bank and especially of the number of high-resolution structures is allowing the use of more stringent selection criteria, with a consequent improvement of the quality of the subsets of the Protein Data Bank.

Fuzzy Multi-actor Multi-criteria Decision Making for Sustainability Assessment of biomass-based technologies for hydrogen production

DEFF Research Database (Denmark)

Ren, Jingzheng; Fedele, Andrea; Mason, Marco

2013-01-01

The purpose of this paper is to develop a sustainability assessment method to rank the prior sequence of biomass-based technologies for hydrogen production. A novel fuzzy Multi-actor Multi-criteria Decision Making method which allows multiple groups of decision-makers to use linguistic variables...

Interobserver agreement of Centers for Disease Control and Prevention criteria for classifying infections in critically ill patients

NARCIS (Netherlands)

Klein Klouwenberg, Peter M. C.; Ong, David S. Y.; Bos, Lieuwe D. J.; de Beer, Friso M.; van Hooijdonk, Roosmarijn T. M.; Huson, Mischa A.; Straat, Marleen; van Vught, Lonneke A.; Wieske, Luuk; Horn, Janneke; Schultz, Marcus J.; van der Poll, Tom; Bonten, Marc J. M.; Cremer, Olaf L.

2013-01-01

Correct classification of the source of infection is important in observational and interventional studies of sepsis. Centers for Disease Control and Prevention criteria are most commonly used for this purpose, but the robustness of these definitions in critically ill patients is not known. We

Toxic chemical risk acceptance criteria

International Nuclear Information System (INIS)

Craig, D.K.; Davis, J.; Lee, L.; Lein, P.; Omberg, S.

1992-01-01

This paper presents recommendations of a subcommittee of the Westinghouse M ampersand 0 Nuclear Facility Safety Committee concerning toxic chemical risk acceptance criteria. Two sets of criteria have been developed, one for use in the hazard classification of facilities, and the second for use in comparing risks in DOE non-reactor nuclear facility Safety Analysis Reports. The Emergency Response Planning Guideline (ERPG) values are intended to provide estimates of concentration ranges for specific chemicals above which exposure would be expected to lead to adverse heath effects of increasing severity for ERPG-1, -2, and -3s. The subcommittee recommends that criteria for hazard class or risk range be based on ERPGs for all chemicals. Probability-based Incremental Cancer Risk (ICR) criteria are recommended for additional analyses of risks from all known or suspected human carcinogens. Criteria are given for both on-site and off-site exposure. The subcommittee also recommends that the 5-minute peak concentration be compared with the relevant criterion with no adjustment for exposure time. Since ERPGs are available for only a limited number of chemicals, the subcommittee has developed a proposed hierarchy of concentration limit parameters for the different criteria

Dynamic criteria for partitioning and transmutation

International Nuclear Information System (INIS)

Lu, A.H.

1991-11-01

This paper addresses dynamic criteria intended to optimize partitioning and transmutation (P-T) concept development supporting improved nuclear waste management. Six criteria are proposed initially and the rationale for each is briefly explained. Each criterion is used as a measure (or dimension) on which the developed concepts can be evaluated. The criteria allow the P-T concepts to be evaluated in an integral system including long-term energy needs, fuel cycle, and waste management. New criteria will be identified along with the P-T concept development, and each criterion will be realistically weighted so that it is comparable in an overall criteria evaluation. The weights are subject to change as a result of technical advancements and public perception on various issues. Incomplete criteria will result in a poor choice because important factors may not be considered when the decision is made. A successful decision on the optimal P-T system depends on the completeness of criteria (dimensions) as well as realistic weights assigned to each criterion

Photovoltaic system criteria documents. Volume 3: Environmental issues and evaluation criteria for photovoltaic applications

Science.gov (United States)

Koenig, John C.; Billitti, Joseph W.; Tallon, John M.

1979-01-01

The environmental issues and evaluation criteria relating to the suitability of sites proposed for photovoltaic (PV) system deployment are identified. The important issues are defined, briefly discussed and then developed into evaluation criteria. System designers are provided with information on the environmental sensitivity of PV systems in realistic applications, background material which indicates the applicability of the siting issues identified, and evaluation criteria are defined to facilitate the selection of sites that maximize PV system operation.

A Quantitative Study Examining Teacher Stress, Burnout, and Self-Efficacy

Science.gov (United States)

Stephenson, Timar D.

2012-01-01

The purpose of this quantitative, correlational study was to examine the relationships between stress, burnout, and self-efficacy in public school teachers in the Turks and Caicos Islands. The Teacher Stress Inventory was used to collect data on teacher stress, the Maslach Burnout Inventory Educators Survey was used to obtain data on teacher…

Similarities and differences in vapor explosion criteria

International Nuclear Information System (INIS)

Cronenberg, A.W.

1978-01-01

An overview of recent ideas pertaining to vapor explosion criteria indicates that in general sense, a consensus of opinion is emerging on the conditions applicable to explosive vaporization. Experimental and theoretical work has lead a number of investigators to the formulation of such conditions which are quite similar in many respects, although the quantitative details of the model formulation of such conditions are somewhat different. All model concepts are consistent in that an initial period of stable film boiling, separating molten fuel from coolant, is considered necessary (at least for large-scale interactions and efficient intermixing), with subsequent breakdown of film boiling due to pressure and/or thermal effects, followed by intimate fuel-coolant contact and a rapid vaporization process which is sufficient to cause shock pressurization. Although differences arise as to the conditions for and the energetics associated with film boiling destabilization and the mode and energetics of fragmentation and intermixing. However, the principal area of difference seems to be the question of what constitutes the requisite condition(s) for rapid vapor production to cause shock pressurization

Influence of radiographic contrast agents on quantitative coronary angiography

International Nuclear Information System (INIS)

Jost, Stefan; Hausmann, Dirk; Lippolt, Peter; Gerhardt, Uwe; Lichtlen, Paul R.

1997-01-01

Purpose. Quantitative angiographic studies on the vasomotility of epicardial coronary arteries are gaining increasing relevance. We investigated whether radiographic contrast agents might influence coronary vasomotor tone and thereby the results of such studies. Methods. Coronary angiograms were taken in 12 patients with coronary artery disease at intervals of 5, 3, 2, and 1 min with the low-osmolar, nonionic contrast agent iopamidol 300, and were repeated at identical intervals with the high-osmolar, ionic agent diatrizoate 76%. Results. Quantitative cine film analysis demonstrated no significant diameter changes in angiographically normal and stenotic coronary arteries with iopamidol. With diatrizoate, however, normal segments were dilated 2%±2% (p<0.01) after 2 min and 10%±3% after the 1 min interval (p<0.001). Stenoses showed no uniform responses to diatrizoate. Conclusion. Low-osmolar, nonionic contrast agents should be preferred for quantitative angiographic studies on epicardial coronary vasomotility. When using ionic contrast agents, injection intervals of at least 3 min are required

The QUANTEC criteria for parotid gland dose and their efficacy to prevent moderate to severe patient-rated xerostomia.

Science.gov (United States)

Beetz, Ivo; Steenbakkers, Roel J H M; Chouvalova, Olga; Leemans, Charles R; Doornaert, Patricia; van der Laan, Bernard F A M; Christianen, Miranda E M C; Vissink, Arjan; Bijl, Henk P; van Luijk, Peter; Langendijk, Johannes A

2014-05-01

Recently, the Quantitative Analysis of Normal Tissue Effect in the Clinic (QUANTEC) Group defined dose-volume constraints for the parotid glands to avoid severe xerostomia. The aim of this study was to determine if application of these QUANTEC criteria also protected against moderate-to-severe patient-rated xerostomia. The study population consisted of 307 head and neck cancer patients treated with primary (chemo)radiotherapy, either with 3D-CRT (56%) or with IMRT (44%). All patients participated in a standard follow-up program in which radiation-induced toxicity and quality of life were prospectively assessed. Patients who met the QUANTEC criteria were classified as low risk and otherwise as high risk. In total, 41% of the patients (treated with 3D-CRT and IMRT) were classified as low risk patients. In the group treated with 3D-CRT and IMRT, it was possible to meet the QUANTEC criteria in 47% and 32% of the patients, respectively. Sparing the parotid glands with IMRT was considerably more difficult in patients with lymph node metastases and in patients with nasopharyngeal and oropharyngeal tumours. Low risk patients reported significantly less moderate-to-severe xerostomia than high risk patients. However, the predicted risk of elderly patients and patients with pre-existing minor patient-rated xerostomia at baseline was > 20%, even when the QUANTEC criteria were met. Significantly lower rates of radiation-induced patient-rated xerostomia were found among low risk patients treated according to the QUANTEC criteria, but these criteria do not completely protect against xerostomia. Particularly in elderly patients and patients already suffering from minor xerostomia at baseline, the QUANTEC criteria do not sufficiently protect against persistent, moderate-to-severe patient-rated xerostomia.

Radiological design criteria

International Nuclear Information System (INIS)

Selby, J.M.; Andersen, B.V.; Carter, L.A.; Waite, D.A.

1977-01-01

Many new nuclear facilities are unsatisfactory from a radiation protection point of view, particularly when striving to maintain occupational exposure as low as practicable 'ALAP'. Radiation protection is achieved through physical protective features supplemented by administrative controls. Adequate physical protective feature should be achieved during construction so that supplemental administrative controls may be kept simple and workable. Many nuclear facilities fall short of adequate physical protective features, thus, remedial and sometimes awkward administrative procedures are required to safely conduct work. In reviewing the various handbooks, reports and regulations which deal with radiation protection, it may be noted that there is minimal radiological design guidance for application to nuclear facilities. A set of criteria or codes covering functional areas rather than specific nuclear facility types is badly needed. The following are suggested as functional areas to be considered: characterization of the Facility; siting and access; design exposure limits; layout (people and materials flow); ventilation and effluent control; radiation protection facilities and systems. The application of such radiological design criteria early in the design process would provide some assurance that nuclear facilities will be safe, flexible, and efficient with a minimum of costly retrofitting or administrative restrictions. Criteria which we have found helpful in these functional areas is discussed together with justification for adoption of such criteria and identification of problems which still require solution

Quantitative research versus quality assurance, quality improvement, total quality management, and continuous quality improvement.

Science.gov (United States)

Vogelsang, J

1999-04-01

The purpose of this report is to provide a review of the scientific method used in the quantitative research studies for consumers, evaluators, and applied nurse researchers. The fundamental characteristics of the problem-solving/ performance-improvement processes of quality assurance, quality improvement, total quality management, and continuous quality improvement are described. Research is compared with these processes, and is followed by a discussion about the publication of quantitative research findings.

Effect of combined loading due to bending and internal pressure on pipe flaw evaluation criteria

International Nuclear Information System (INIS)

Miura, Naoki; Sakai, Shinsuke

2006-01-01

Considering a rational maintenance rule of Light Water Reactor piping, reliable flaw evaluation criteria are essential to determine how a detected flaw is detrimental to continuous plant operation. Ductile fracture is one of the dominant failure modes to be considered for carbon steel piping, and can be analyzed by the elastic-plastic fracture mechanics. Some analytical efforts have been provided as flaw evaluation criteria using load correction factors such like the Z-factors in the JSME codes on fitness-for-service for nuclear power plants or the ASME boiler and pressure vessel code section XI. The present correction factors were conventionally determined taken conservatism and simplicity into account, however, the effect of internal pressure which would be an important factor under an actual plant condition was not adequately considered. Recently, a J-estimation scheme, 'LBB. ENGC' for ductile fracture analysis of circumferentially through-wall-cracked pipes subjected combined loading was newly developed to have a better prediction with more realistic manner. This method is explicitly incorporated the contribution of both bending and tension due to internal pressure by means of the scheme compatible with an arbitrary combined loading history. In this paper, the effect of internal pressure on the flaw evaluation criteria was investigated using the new J-estimation scheme. A correction factor based on the new J-estimation scheme was compared with the present correction factors, and the predictability of the current flaw evaluation criteria was quantitatively evaluated in consideration of internal pressure. (author)

Sediment quality criteria: A review with recommendations for developing criteria for the Hanford Site

Energy Technology Data Exchange (ETDEWEB)

Driver, C.J.

1994-05-01

Criteria for determining the quality of liver sediment are necessary to ensure that concentrations of contaminants in aquatic systems are within acceptable limits for the protection of aquatic and human life. Such criteria should facilitate decision-making about remediation, handling, and disposal of contaminants. Several approaches to the development of sediment quality criteria (SQC) have been described and include both descriptive and numerical methods. However, no single method measures all impacts at all times to all organisms (U.S. EPA 1992b). The U.S. EPA`s interest is primarily in establishing chemically based, numerical SQC that are applicable nation-wide (Shea 1988). Of the approaches proposed for SQC development, only three are being considered for numerical SQC on a national level. These approaches include an Equilibrium Partitioning Approach, a site-specific method using bioassays (the Apparent Effects Threshold Approach), and an approach similar to EPA`s water quality criteria (Pavlou and Weston 1984). Although national (or even regional) criteria address a number of political, litigative, and engineering needs, some researchers feel that protection of benthic communities require site-specific, biologically based criteria (Baudo et al. 1990). This is particularly true for areas where complex mixtures of contaminants are present in sediments. Other scientifically valid and accepted procedures for freshwater SQC include a background concentration approach, methods using field or spiked bioassays, a screening level concentration approach, the Apparent Effects Threshold Approach, the Sediment Quality Triad, the International Joint Commission Sediment Assessment Strategy, and the National Status and Trends Program Approach. The various sediment assessment approaches are evaluated for application to the Hanford Reach and recommendations for Hanford Site sediment quality criteria are discussed.

Criteria for a Sustainable Exploitation of Groundwater. 1. Well Hydraulics and the Regional Simulation of Aquifers; Criterios para una explotacion sustentable del agua subterranea

Energy Technology Data Exchange (ETDEWEB)

Perez Monteagudo, Fernando [Instituto Superior Politecnico Jose A. Echeverrria (Cuba)

2002-12-01

Compared to surface water, groundwater has several disadvantages: its renewal is slow, its potential is more difficult to estimate, and its exploitation often requires more energy. However, it has the advantage of a higher quality. The long-tem storage effect of aquifers guarantees its continuous availability even in regions with wide temporal variations in precipitation. Although at a global scale groundwater use seems small compared with surface water, the order of importance is reversed if only drinking water is considered. Due to its quality, limited vulnerability, and relatively continuous availability, groundwater is a resource of strategic importance. That is why its exploitation must by ruled by sustainability criteria. This work intends to describe in a general framework the basic criteria that must regulate the sustainable management of groundwater. These criteria can be classified as quantitative and qualitative. Both criteria should be integrated to define groundwater resource management strategies. In the first part of this work, the quantitative aspects are emphasized. Among these criteria that rule the limitation of groundwater, drawdowns are of fundamental importance. New, recently developed tools for this purpose are described, which also establish the links between well hydraulics and the regional simulation of aquifers, such as non-Darcy flow, the interference of wells with non-Darcy flow, and the local optimisation approach, among others. The international trends in this field are also discussed. [Spanish] Comparada con el agua superficial, el agua subterranea tiene la siguientes desventajas: una lenta renovacion, un potencial mas dificil de estimar y que con frecuencia se requiere de mas energia para explotarla. Sin embargo, posee una mayor calidad, ademas de que la capacidad de almacenamiento a largo plazo de los acuiferos garantiza la continuidad de su disponibilidad, incluso en regiones con fuertes variaciones temporales de precipitaciones

Highly Quantitative Electrochemical Characterization of Non-Aqueous Electrolytes & Solid Electrolyte Interphases

Energy Technology Data Exchange (ETDEWEB)

Sergiy V. Sazhin; Kevin L. Gering; Mason K. Harrup; Harry W. Rollins

2012-10-01

The methods to measure solid electrolyte interphase (SEI) electrochemical properties and SEI formation capability of non-aqueous electrolyte solutions are not adequately addressed in the literature. And yet, there is a strong demand in new electrolyte generations that promote stabilized SEIs and have an influence to resolve safety, calendar life and other limitations of Li-ion batteries. To fill this gap, in situ electrochemical approach with new descriptive criteria for highly quantitative characterization of SEI and electrolytes is proposed. These criteria are: SEI formation capacity, SEI corrosion rate, SEI maintenance rate, and SEI kinetic stability. These criteria are associated with battery parameters like irreversible capacity, self-discharge, shelf-life, power, etc. Therefore, they are especially useful for electrolyte development and standard fast screening, allowing a skillful approach to narrow down the search for the best electrolyte. The characterization protocol also allows retrieving information on interfacial resistance for SEI layers and the electrochemical window of electrolytes, the other important metrics of characterization. The method validation was done on electrolyte blends containing phosphazenes, developed at Idaho National Laboratory, as 1.2M LiPF6 [80 % EC-MEC (2:8) (v/v) + 20% Phosphazene variety] (v/v), which were targeted for safer electrolyte variations.

Undergraduate Students’Evaluation Criteria When Using Web Resources for Class Papers

Directory of Open Access Journals (Sweden)

Tsai-Youn Hung

2004-09-01

Full Text Available The growth in popularity of the World Wide Web has dramatically changed the way undergraduate students conduct information searches. The purpose of this study is to investigate what core quality criteria undergraduate students use to evaluate Web resources for their class papers and to what extent they evaluate the Web resources. This study reports on five Web page evaluations and a questionnaire survey of thirty five undergraduate students in the Information Technology and Informatics Program at Rutgers University. Results show that undergraduate students have become increasingly sophisticated about using Web resources, but not yet sophisticated about searching them. Undergraduate students only used one or two surface quality criteria to evaluate Web resources. They made immediate judgments about the surface features of Web pages and ignored the content of the documents themselves. This research suggests that undergraduate instructors should take the responsibility for instructing students on basic Web use knowledge or work with librarians to develop undergraduate students information literacy skills.

Criteria for performance evaluation

Directory of Open Access Journals (Sweden)

David J. Weiss

2009-03-01

Full Text Available Using a cognitive task (mental calculation and a perceptual-motor task (stylized golf putting, we examined differential proficiency using the CWS index and several other quantitative measures of performance. The CWS index (Weiss and Shanteau, 2003 is a coherence criterion that looks only at internal properties of the data without incorporating an external standard. In Experiment 1, college students (n = 20 carried out 2- and 3-digit addition and multiplication problems under time pressure. In Experiment 2, experienced golfers (n = 12, also college students, putted toward a target from nine different locations. Within each experiment, we analyzed the same responses using different methods. For the arithmetic tasks, accuracy information (mean absolute deviation from the correct answer, MAD using a coherence criterion was available; for golf, accuracy information using a correspondence criterion (mean deviation from the target, also MAD was available. We ranked the performances of the participants according to each measure, then compared the orders using Spearman's rextsubscript{s}. For mental calculation, the CWS order correlated moderately (rextsubscript{s} =.46 with that of MAD. However, a different coherence criterion, degree of model fit, did not correlate with either CWS or accuracy. For putting, the ranking generated by CWS correlated .68 with that generated by MAD. Consensual answers were also available for both experiments, and the rankings they generated correlated highly with those of MAD. The coherence vs. correspondence distinction did not map well onto criteria for performance evaluation.

Histopathology of valves in infective endocarditis, diagnostic criteria and treatment considerations.

Science.gov (United States)

Brandão, Tatiana J D; Januario-da-Silva, Carolina A; Correia, Marcelo G; Zappa, Monica; Abrantes, Jaime A; Dantas, Angela M R; Golebiovski, Wilma; Barbosa, Giovanna Ianini F; Weksler, Clara; Lamas, Cristiane C

2017-04-01

Infective endocarditis (IE) is a severe disease. Pathogen isolation is fundamental so as to treat effectively and reduce morbidity and mortality. Blood and valve culture and histopathology (HP) are routinely employed for this purpose. Valve HP is the gold standard for diagnosis. To determine the sensitivity and specificity of clinical criteria for IE (the modified Duke and the St Thomas' minor modifications, STH) of blood and valve culture compared to valve HP, and to evaluate antibiotic treatment duration. Prospective case series of patients, from 2006 to 2014 with surgically treated IE. Statistical analysis was done by the R software. There were 136 clinically definite episodes of IE in 133 patients. Mean age ± SD was 43 ± 15.6 years and IE was left sided in 81.6 %. HP was definite in 96 valves examined, which were used as gold standard. Sensitivity of blood culture was 61 % (CI 0.51, 0.71) and of valve culture 15 % (CI 0.07, 0.26). The modified Duke criteria were 65 % (CI 0.55, 0.75) sensitive and 33 % specific, while the STH's sensitivity was 72 % (CI 0.61, 0.80) with similar specificity. In multivariate analysis and logistic regression, the only variable with statistical significance was duration of antibiotic therapy postoperatively. Valve HP had high sensitivity and valve culture low sensitivity in the diagnosis of IE. The STH's criteria were more sensitive than the modified Duke criteria. Valve HP should guide duration of postoperative antibiotic treatment.

Criteria for Authorship in Bioethics

OpenAIRE

Resnik, David B.; Master, Zubin

2011-01-01

Multiple authorship is becoming increasingly common in bioethics research. There are well-established criteria for authorship in empirical bioethics research but not for conceptual research. It is important to develop criteria for authorship in conceptual publications to prevent undeserved authorship and uphold standards of fairness and accountability. This article explores the issue of multiple authorship in bioethics and develops criteria for determining who should be an author on a concept...

MRI with DWI for the Detection of Posttreatment Head and Neck Squamous Cell Carcinoma: Why Morphologic MRI Criteria Matter.

Science.gov (United States)

Ailianou, A; Mundada, P; De Perrot, T; Pusztaszieri, M; Poletti, P-A; Becker, M

2018-04-01

Although diffusion-weighted imaging combined with morphologic MRI (DWIMRI) is used to detect posttreatment recurrent and second primary head and neck squamous cell carcinoma, the diagnostic criteria used so far have not been clarified. We hypothesized that precise MRI criteria based on signal intensity patterns on T2 and contrast-enhanced T1 complement DWI and therefore improve the diagnostic performance of DWIMRI. We analyzed 1.5T MRI examinations of 100 consecutive patients treated with radiation therapy with or without additional surgery for head and neck squamous cell carcinoma. MRI examinations included morphologic sequences and DWI ( b =0 and b =1000 s/mm 2 ). Histology and follow-up served as the standard of reference. Two experienced readers, blinded to clinical/histologic/follow-up data, evaluated images according to clearly defined criteria for the diagnosis of recurrent head and neck squamous cell carcinoma/second primary head and neck squamous cell carcinoma occurring after treatment, post-radiation therapy inflammatory edema, and late fibrosis. DWI analysis included qualitative (visual) and quantitative evaluation with an ADC threshold. Recurrent head and neck squamous cell carcinoma/second primary head and neck squamous cell carcinoma occurring after treatment was present in 36 patients, whereas 64 patients had post-radiation therapy lesions only. The Cohen κ for differentiating tumor from post-radiation therapy lesions with MRI and qualitative DWIMRI was 0.822 and 0.881, respectively. Mean ADCmean in recurrent head and neck squamous cell carcinoma/second primary head and neck squamous cell carcinoma occurring after treatment (1.097 ± 0.295 × 10 -3 mm 2 /s) was significantly lower ( P .05). Although ADCs were similar in tumors and late fibrosis, morphologic MRI criteria facilitated distinction between the 2 conditions. The sensitivity, specificity, positive and negative predictive values, and positive and negative likelihood ratios (95% CI) of

78 FR 7994 - Criteria Used To Order Administrative Detention of Food for Human or Animal Consumption

Science.gov (United States)

2013-02-05

... different comments. The number assigned to each comment is purely for organizational purposes and does not... Agency also is aware that the new criteria provide FDA with more flexibility in its use of administrative..., Executive Order 13563, the Regulatory Flexibility Act (5 U.S.C. 601-612), and the Unfunded Mandates Reform...

EVALUATION OF SERVICE QUALITY OF AIRWAY COMPANIES GIVING DOMESTIC SERVICES IN TURKEY WITH FUZZY SET APPROACH

Directory of Open Access Journals (Sweden)

H. Handan DEMIR

2013-01-01

Full Text Available Today, service quality has become a major phenomenon with the requirement of meeting consumer demands in the best way brought along with the rising competition between companies. Airway transportation is preferred more and more during the recent years. Many qualitative and quantitative criteria are considered while evaluating service criteria in airway transportation. In this context, evaluation of service quality is a decisionmaking problem with many criteria. The purpose of this study is to evaluate service quality of domestic airway companies in Turkey. In this study; fuzzy TOPSIS method which is one of the most preferred fuzzy MCDM methods, extension of multi criteria decision making methods in fuzzy environments, considering qualitative and quantitative criteria together and giving opportunity to make group decisions in fuzzy environments. As a result, evaluation was made based on service quality criteria for the most preferred airways companies in Turkey and these companies were ranked according to their levels of service quality.

U.S. recreational water quality criteria: a vision for the future

Science.gov (United States)

Fujioka, Roger S.; Solo-Gabriele, Helena M.; Byappanahalli, Muruleedhara N.; Kirs, Marek

2015-01-01

This manuscript evaluates the U.S. Recreational Water Quality Criteria (RWQC) of 2012, based upon discussions during a conference held 11–13 March 2013, in Honolulu, Hawaii. The RWQC of 2012 did not meet expectations among the research community because key recommended studies were not completed, new data to assess risks to bathers exposed to non-point sources of fecal indicator bacteria (FIB) were not developed, and the 2012 RWQC did not show marked improvements in strategies for assessing health risks for bathers using all types of recreational waters. The development of the 2012 RWQC was limited in scope because the epidemiologic studies at beach sites were restricted to beaches with point sources of pollution and water samples were monitored for only enterococci. The vision for the future is development of effective RWQC guidelines based on epidemiologic and quantitative microbial risk assessment (QMRA) studies for sewage specific markers, as well as human enteric pathogens so that health risks for bathers at all recreational waters can be determined. The 2012 RWQC introduced a program for states and tribes to develop site-specific water quality criteria, and in theory this approach can be used to address the limitations associated with the measurements of the traditional FIB.

Contribution and perspectives of quantitative genetics to plant breeding in Brazil

Directory of Open Access Journals (Sweden)

Fernando Henrique Ribeiro Barrozo Toledo

2012-12-01

Full Text Available The purpose of this article is to show how quantitative genetics has contributed to the huge genetic progress obtained inplant breeding in Brazil in the last forty years. The information obtained through quantitative genetics has given Brazilian breedersthe possibility of responding to innumerable questions in their work in a much more informative way, such as the use or not of hybridcultivars, which segregating population to use, which breeding method to employ, alternatives for improving the efficiency of selectionprograms, and how to handle the data of progeny and/or cultivars evaluations to identify the most stable ones and thus improverecommendations.

Renal geology (quantitative renal stone analysis) by 'Fourier transform infrared spectroscopy'.

Science.gov (United States)

Singh, Iqbal

2008-01-01

To prospectively determine the precise stone composition (quantitative analysis) by using infrared spectroscopy in patients with urinary stone disease presenting to our clinic. To determine an ideal method for stone analysis suitable for use in a clinical setting. After routine and a detailed metabolic workup of all patients of urolithiasis, stone samples of 50 patients of urolithiasis satisfying the entry criteria were subjected to the Fourier transform infrared spectroscopic analysis after adequate sample homogenization at a single testing center. Calcium oxalate monohydrate and dihydrate stone mixture was most commonly encountered in 35 (71%) followed by calcium phosphate, carbonate apatite, magnesium ammonium hexahydrate and xanthine stones. Fourier transform infrared spectroscopy allows an accurate, reliable quantitative method of stone analysis. It also helps in maintaining a computerized large reference library. Knowledge of precise stone composition may allow the institution of appropriate prophylactic therapy despite the absence of any detectable metabolic abnormalities. This may prevent and or delay stone recurrence.

A systematic review of quantitative burn wound microbiology in the management of burns patients.

Science.gov (United States)

Halstead, Fenella D; Lee, Kwang Chear; Kwei, Johnny; Dretzke, Janine; Oppenheim, Beryl A; Moiemen, Naiem S

2018-02-01

The early diagnosis of infection or sepsis in burns are important for patient care. Globally, a large number of burn centres advocate quantitative cultures of wound biopsies for patient management, since there is assumed to be a direct link between the bioburden of a burn wound and the risk of microbial invasion. Given the conflicting study findings in this area, a systematic review was warranted. Bibliographic databases were searched with no language restrictions to August 2015. Study selection, data extraction and risk of bias assessment were performed in duplicate using pre-defined criteria. Substantial heterogeneity precluded quantitative synthesis, and findings were described narratively, sub-grouped by clinical question. Twenty six laboratory and/or clinical studies were included. Substantial heterogeneity hampered comparisons across studies and interpretation of findings. Limited evidence suggests that (i) more than one quantitative microbiology sample is required to obtain reliable estimates of bacterial load; (ii) biopsies are more sensitive than swabs in diagnosing or predicting sepsis; (iii) high bacterial loads may predict worse clinical outcomes, and (iv) both quantitative and semi-quantitative culture reports need to be interpreted with caution and in the context of other clinical risk factors. The evidence base for the utility and reliability of quantitative microbiology for diagnosing or predicting clinical outcomes in burns patients is limited and often poorly reported. Consequently future research is warranted. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

Multi-criteria decision aid approach for the selection of the best compromise management scheme for ELVs: the case of Cyprus.

Science.gov (United States)

Mergias, I; Moustakas, K; Papadopoulos, A; Loizidou, M

2007-08-25

Each alternative scheme for treating a vehicle at its end of life has its own consequences from a social, environmental, economic and technical point of view. Furthermore, the criteria used to determine these consequences are often contradictory and not equally important. In the presence of multiple conflicting criteria, an optimal alternative scheme never exists. A multiple-criteria decision aid (MCDA) method to aid the Decision Maker (DM) in selecting the best compromise scheme for the management of End-of-Life Vehicles (ELVs) is presented in this paper. The constitution of a set of alternatives schemes, the selection of a list of relevant criteria to evaluate these alternative schemes and the choice of an appropriate management system are also analyzed in this framework. The proposed procedure relies on the PROMETHEE method which belongs to the well-known family of multiple criteria outranking methods. For this purpose, level, linear and Gaussian functions are used as preference functions.

National Recommended Water Quality Criteria

Data.gov (United States)

U.S. Environmental Protection Agency — The National Recommended Water Quality Criteria is a compilation of national recommended water quality criteria for the protection of aquatic life and human health...

Quantitative lymphography

International Nuclear Information System (INIS)

Mostbeck, A.; Lofferer, O.; Kahn, P.; Partsch, H.; Koehn, H.; Bialonczyk, Ch.; Koenig, B.

1984-01-01

Labelled colloids and macromolecules are removed lymphatically. The uptake of tracer in the regional lymphnodes is a parameter of lymphatic flow. Due to great variations in patient shape - obesity, cachexia - and accompanying variations in counting efficiencies quantitative measurements with reasonable accuracy have not been reported to date. A new approach to regional absorption correction is based on the combination of transmission and emission scans for each patient. The transmission scan is used for calculation of an absorption correction matrix. Accurate superposition of the correction matrix and the emission scan is achieved by computing the centers of gravity of point sources and - in the case of aligning opposite views - by cross correlation of binary images. In phantom studies the recovery was high (98.3%) and the coefficient of variation of repeated measurement below 1%. In patient studies a standardized stress is a prerequisite for reliable and comparable results. Discrimination between normals (14.3 +- 4.2D%) and patients with lymphedema (2.05 +- 2.5D%) was highly significant using praefascial lymphography and sc injection. Clearence curve analysis of the activities at the injection site, however, gave no reliable data for this purpose. In normals, the uptake in lymphnodes after im injection is by one order of magnitude lower then the uptake after sc injection. The discrimination between normals and patients with postthromboic syndrome was significant. Lymphography after ic injection was in the normal range in 2/3 of the patients with lymphedema and is therefore of no diagnostic value. The difference in uptake after ic and sc injection demonstrated for the first time by our quantitative method provides new insights into the pathophysiology of lymphedema and needs further investigation. (Author)

Prevalence of overweight and obesity in Asian American students using Asian specific criteria to determine weight classification

Science.gov (United States)

Individuals of Asian descent have been found to be at greater risk of developing conditions associated with obesity at lower BMI levels compared to other ethnic groups. As a result, new criteria have been developed to identify overweight and obesity in Asian populations. The purpose of the current s...

Water quality criteria for lead

Energy Technology Data Exchange (ETDEWEB)

Nagpal, N.K.

1987-01-01

This report is one in a series that establishes water quality criteria for British Columbia. The report sets criteria for lead to protect a number of water uses, including drinking water, freshwater and marine aquatic life, wildlife, livestock, irrigation, and recreation. The criteria are set as either maximum concentrations of total lead that should not be exceeded at any time, or average concentrations that should not be exceeded over a 30-day period. Actual values are summarized.

46 CFR 385.51 - Criteria: Projects.

Science.gov (United States)

2010-10-01

... results; (iii) The extent of the problems treated and whether the objectives sought by the undertaking are... MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MISCELLANEOUS RESEARCH AND DEVELOPMENT GRANT AND COOPERATIVE AGREEMENTS REGULATIONS Criteria for Award § 385.51 Criteria: Projects. The criteria to be used by...

Failure Models and Criteria for FRP Under In-Plane or Three-Dimensional Stress States Including Shear Non-Linearity

Science.gov (United States)

Pinho, Silvestre T.; Davila, C. G.; Camanho, P. P.; Iannucci, L.; Robinson, P.

2005-01-01

A set of three-dimensional failure criteria for laminated fiber-reinforced composites, denoted LaRC04, is proposed. The criteria are based on physical models for each failure mode and take into consideration non-linear matrix shear behaviour. The model for matrix compressive failure is based on the Mohr-Coulomb criterion and it predicts the fracture angle. Fiber kinking is triggered by an initial fiber misalignment angle and by the rotation of the fibers during compressive loading. The plane of fiber kinking is predicted by the model. LaRC04 consists of 6 expressions that can be used directly for design purposes. Several applications involving a broad range of load combinations are presented and compared to experimental data and other existing criteria. Predictions using LaRC04 correlate well with the experimental data, arguably better than most existing criteria. The good correlation seems to be attributable to the physical soundness of the underlying failure models.

A Review on influencing criteria for selecting supplier of information technology services in the hospital

Science.gov (United States)

Ajami, Sima; Rajabzadeh, Ahmad; Ketabi, Saeedeh

2014-01-01

Organizations try to outsource their activities as much as possible in order to prevent the problems and use organizational capabilities in Information Technology (IT) field. The purpose of this paper was first, to express the effective criteria for selecting suppliers of IT services, second, to explain the advantages and disadvantages of outsourcing IT in hospitals. This study was narrative review, which search was conducted with the help of libraries, books, conference proceedings, and databases of Science Direct, PubMed, Proquest, Springer, and SID (Scientific Information Database). In our searches, we employed the following keywords and their combinations: Outsourcing, information technology, hospital, decision making, and criteria. The preliminary search resulted in 120 articles, which were published between 2000 and 2013 during July 2013. After a careful analysis of the content of each paper, a total of 46 papers were selected based on their relevancy. The criteria and sub-criteria influencing outsourcing decisions in Iranian hospitals were identified in six major categories including administrative issues, issues related to the service/product, technology factors, environmental factors, risks, and economic factors associated with 15 sub-criteria containing business integration, dependence on suppliers, human resources, focus on core competencies, facilities and physical capital, innovation, quality, speed of service delivery, flexibility, market capabilities, geographical location, security, management control, cost, and financial capability. Identify the advantages and disadvantages of outsourcing and effective criteria in IT services supplier selection causes the managers be able to take the most appropriate decision to select supplier of IT services. This is a general review on influencing criteria for electing of supplier of information technology services in hospitals. PMID:25540781

A Review on influencing criteria for selecting supplier of information technology services in the hospital.

Science.gov (United States)

Ajami, Sima; Rajabzadeh, Ahmad; Ketabi, Saeedeh

2014-01-01

Organizations try to outsource their activities as much as possible in order to prevent the problems and use organizational capabilities in Information Technology (IT) field. The purpose of this paper was first, to express the effective criteria for selecting suppliers of IT services, second, to explain the advantages and disadvantages of outsourcing IT in hospitals. This study was narrative review, which search was conducted with the help of libraries, books, conference proceedings, and databases of Science Direct, PubMed, Proquest, Springer, and SID (Scientific Information Database). In our searches, we employed the following keywords and their combinations: Outsourcing, information technology, hospital, decision making, and criteria. The preliminary search resulted in 120 articles, which were published between 2000 and 2013 during July 2013. After a careful analysis of the content of each paper, a total of 46 papers were selected based on their relevancy. The criteria and sub-criteria influencing outsourcing decisions in Iranian hospitals were identified in six major categories including administrative issues, issues related to the service/product, technology factors, environmental factors, risks, and economic factors associated with 15 sub-criteria containing business integration, dependence on suppliers, human resources, focus on core competencies, facilities and physical capital, innovation, quality, speed of service delivery, flexibility, market capabilities, geographical location, security, management control, cost, and financial capability. Identify the advantages and disadvantages of outsourcing and effective criteria in IT services supplier selection causes the managers be able to take the most appropriate decision to select supplier of IT services. This is a general review on influencing criteria for electing of supplier of information technology services in hospitals.

Acceptance-criteria for the bedrock for deep geologic disposal of spent nuclear fuel. Proceedings from a seminar at Gothenburg University

International Nuclear Information System (INIS)

1995-11-01

The seminar was directed to Nordic participants, and discussed disposal in the Nordic crystalline bedrock. Criteria for the bedrock should include: It should give durable mechanical protection for the engineered barriers; give a stable and favorable chemical environment for these barriers; have a low turnover of ground water in the near field; be easy to characterize; give favorable recipient-conditions; not have valuable minerals in workable quantities. These general criteria raise several questions coupled to the safety analysis: e.g. the need for geological, hydrological and geochemical parameters. Which data are missing, which are most difficult to find? What should the site characterization program look like to focus on factors that are of the highest importance according to the safety analysis. The demands on the conditions at a site need to be translated into quantitative criteria, which should be expressed as values that can be measured at the site or deduced from such measurements. These questions were discussed at the seminar, and 21 contributions from Finnish, Norwegian and Swedish participants are reported in these proceedings under the chapters: Coupling to the safety analysis; Methodology and criteria for site selection in a regional geoscientific perspective; Rock as a building material - prognosis and result; Geoscientific criteria for the bedrock at the repository - Mechanical protection; Geoscientific criteria for the bedrock at the repository - Low ground water turnover, chemically favorable and stable environment in the near field; Geoscientific criteria for the bedrock at the repository - Demands on the bedrock concerning the migration of radionuclides

Criteria for saturated magnetization loop

International Nuclear Information System (INIS)

Harres, A.; Mikhov, M.; Skumryev, V.; Andrade, A.M.H. de; Schmidt, J.E.; Geshev, J.

2016-01-01

Proper estimation of magnetization curve parameters is vital in studying magnetic systems. In the present article, criteria for discrimination non-saturated (minor) from saturated (major) hysteresis loops are proposed. These employ the analysis of (i) derivatives of both ascending and descending branches of the loop, (ii) remanent magnetization curves, and (iii) thermomagnetic curves. Computational simulations are used in order to demonstrate their validity. Examples illustrating the applicability of these criteria to well-known real systems, namely Fe_3O_4 and Ni fine particles, are provided. We demonstrate that the anisotropy-field value estimated from a visual examination of an only apparently major hysteresis loop could be more than two times lower than the real one. - Highlights: • Proper estimation of hysteresis-loop parameters is vital in magnetic studies. • We propose criteria for discrimination minor from major hysteresis loops. • The criteria analyze magnetization, remanence and ZFC/FC curves and/or their derivatives. • Examples of their application on real nanoparticles systems are given. • Using the criteria could avoid twofold or bigger saturation-field underestimation errors.

Criteria for saturated magnetization loop

Energy Technology Data Exchange (ETDEWEB)

Harres, A. [Departamento de Física, UFSM, Santa Maria, 97105-900 Rio Grande do Sul (Brazil); Mikhov, M. [Faculty of Physics, University of Sofia, 1164 Sofia (Bulgaria); Skumryev, V. [Institució Catalana de Recerca i Estudis Avançats, 08010 Barcelona (Spain); Departament de Física, Universitat Autònoma de Barcelona, 08193 Barcelona (Spain); Andrade, A.M.H. de; Schmidt, J.E. [Instituto de Física, UFRGS, Porto Alegre, 91501-970 Rio Grande do Sul (Brazil); Geshev, J., E-mail: julian@if.ufrgs.br [Departament de Física, Universitat Autònoma de Barcelona, 08193 Barcelona (Spain); Instituto de Física, UFRGS, Porto Alegre, 91501-970 Rio Grande do Sul (Brazil)

2016-03-15

Proper estimation of magnetization curve parameters is vital in studying magnetic systems. In the present article, criteria for discrimination non-saturated (minor) from saturated (major) hysteresis loops are proposed. These employ the analysis of (i) derivatives of both ascending and descending branches of the loop, (ii) remanent magnetization curves, and (iii) thermomagnetic curves. Computational simulations are used in order to demonstrate their validity. Examples illustrating the applicability of these criteria to well-known real systems, namely Fe{sub 3}O{sub 4} and Ni fine particles, are provided. We demonstrate that the anisotropy-field value estimated from a visual examination of an only apparently major hysteresis loop could be more than two times lower than the real one. - Highlights: • Proper estimation of hysteresis-loop parameters is vital in magnetic studies. • We propose criteria for discrimination minor from major hysteresis loops. • The criteria analyze magnetization, remanence and ZFC/FC curves and/or their derivatives. • Examples of their application on real nanoparticles systems are given. • Using the criteria could avoid twofold or bigger saturation-field underestimation errors.

Design criteria for the light duty utility arm system end effectors

International Nuclear Information System (INIS)

Pardini, A.F.; Kiebel, G.R.

1995-12-01

The purpose of this document is to provide criteria for the design of end effectors that will be used as part of the Light Duty Utility Arm (LDUA) System. Actual component design, fabrication, testing, and inspection will be performed by various DOE laboratories, industry, and academia. This document augments WHC-SD-TD-FRD-003, 'Functions and Requirements for the Light Duty Utility Arm Integrated System' (F). All requirements dictated in the F shall also be applicable in this document. Whenever conflicts arise between this document and the F, this document shall take precedence

45 CFR 1176.3 - Criteria.

Science.gov (United States)

2010-10-01

... ENDOWMENT FOR THE HUMANITIES PART-TIME CAREER EMPLOYMENT § 1176.3 Criteria. Positions becoming vacant... to part-time. Among the criteria which may be used when conducting this review are: (a) Mission...

Reference design (MK-I and MK-II) for experimental multi-purpose VHTR

International Nuclear Information System (INIS)

Miyamoto, Yoshiaki; Suzuki, Kunihiko; Sato, Sadao

1975-10-01

This report summarizes the results of a study on thermal and mechanical performances of the core, which are obtained in course of reference design (Mk-I and Mk-II) for the experimental multi-purpose VHTR: (1) Design criteria, design methods and design data. These bases are also discussed in order to refer in the case of proceeding a next design work. (2) The results of performance analysis such as the initial core and its prediction for the irradiated core. (auth.)

7 CFR 14.6 - Criteria for determining the pri- mary purpose of payments with respect to potential exclusion...

Science.gov (United States)

2010-01-01

... conservation includes actions that, for a given level of water supply, reduce the demand for or use of water by... reuse of water, thereby making existing supplies available for other current or future uses; or (iv) Improving land management practices for the purpose of reducing water use, loss, waste, increasing the...

10 CFR 905.36 - Marketing criteria.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Marketing criteria. 905.36 Section 905.36 Energy DEPARTMENT OF ENERGY ENERGY PLANNING AND MANAGEMENT PROGRAM Power Marketing Initiative § 905.36 Marketing criteria. Western shall retain applicable provisions of existing marketing criteria for projects where...

The quantitative analysis of data for magnetization of ferromagnet. Extended thermodynamic approach

International Nuclear Information System (INIS)

Bodryakov, V.Yu.; Bashkatov, A.N.

2005-01-01

A quantitative analysis of M(H,T) data on magnetization of a gadolinium single crystal in the vicinity of Curie point is accomplished within the frameworks of extended thermodynamic approach. It is established that actually observed behavior of temperature dependences of thermodynamic coefficients for gadolinium even near Curie point is sharply different from that in Landau theory. A discrepancy revealed leads to conclusion that traditional concepts should be revised. The solution of extended equation of a ferromagnet magnetic state is found and criteria of its stability are shown [ru

User-Centric Multi-Criteria Information Retrieval

Science.gov (United States)

Wolfe, Shawn R.; Zhang, Yi

2009-01-01

Information retrieval models usually represent content only, and not other considerations, such as authority, cost, and recency. How could multiple criteria be utilized in information retrieval, and how would it affect the results? In our experiments, using multiple user-centric criteria always produced better results than a single criteria.

Criteria for Radionuclide Activity Concentrations for Food and Drinking Water

International Nuclear Information System (INIS)

2016-04-01

Requirements for the protection of people from the harmful consequences of exposure to ionizing radiation, for the safety of radiation sources and for the protection of the environment are established in IAEA Safety Standards Series No. GSR Part 3, Radiation Protection and Safety of Radiation Sources: International Basic Safety Standards. GSR Part 3 requires that the regulatory body or other relevant authority establish specific reference levels for exposure due to radionuclides in commodities, including food and drinking water. The reference level is based on an annual effective dose to the representative person that generally does not exceed a value of about 1 mSv. International standards have been developed by the Food and Agriculture Organization of the United Nations/World Health Organization (FAO/WHO) Codex Alimentarius Commission for levels of radionuclides contained in food traded internationally that contains, or could potentially contain, radioactive substances as a consequence of a nuclear or radiological emergency. International standards have also been developed by the WHO for radionuclides contained in drinking water, other than in a nuclear or radiological emergency. These international standards provide guidance and criteria in terms of levels of individual radiation dose, levels of activity concentration of specific radionuclides, or both. The criteria derived in terms of levels of activity concentration in the various international standards differ owing to a number of factors and assumptions underlying the common objective of protecting public health in different circumstances. This publication considers the various international standards to be applied at the national level for the assessment of levels of radionuclides in food and in drinking water in different circumstances for the purposes of control, other than in a nuclear or radiological emergency. It collates and provides an overview of the different criteria used in assessing and

Plugging criteria for steam generator tubes with axial cracks near tube support plates

International Nuclear Information System (INIS)

Mattar Neto, Miguel

2000-01-01

Stress corrosion cracking with intergranular attack occurs on the secondary side of steam generator (SG) tubes where impurities concentrate due to boiling under restricted flow conditions. In the most of cases, it can be called ODSCC (Outer Diameter Stress Corrosion Cracking). The typical locations are areas near support plates, in sludge piles and at top of tubesheet crevices. Though it can also occur on free spans under the relatively thin deposits that build up on the tube surfaces. ODSCC near tube plate supports have been the cause of plugging of many tubes. Thus, studies on SG tubes plugging criteria related to this degradation mechanism are presented in this paper. Th purpose is to avoid unnecessary tube plugging from either safety or reliability standpoint. Based on these studies some conclusions on the plugging criteria and on the difficulties to apply them are addressed. (author)

Role of image analysis in quantitative characterisation of nuclear fuel materials

International Nuclear Information System (INIS)

Dubey, J.N.; Rao, T.S.; Pandey, V.D.; Majumdar, S.

2005-01-01

Image analysis is one of the important techniques, widely used for materials characterization. It provides the quantitative estimation of the microstructural features present in the material. This information is very much valuable for finding out the criteria for taking up the fuel for high burn up. Radiometallurgy Division has been carrying out development and fabrication of plutonium related fuels for different type of reactors viz. Purnima, Fast Breeder Test Reactor (FBTR), Prototype Fast Breeder Reactor (PFBR), Boiling Water Reactor (BWR), Advanced Heavy Water Reactor (AHWR), Pressurised Heavy Water Reactor (PHWR) and KAMINI Reactor. Image analysis has been carried out on microstructures of PHWR, AHWR, FBTR and KAMINI fuels. Samples were prepared as per standard ASTM metallographic procedure. Digital images of the microstructure of these specimens were obtained using CCD camera, attached to the optical microscope. These images are stores on computer and used for detection and analysis of features of interest with image analysis software. Quantitative image analysis technique has been standardised and used for finding put type of the porosity, its size, shape and distribution in the above sintered oxide and carbide fuels. This technique has also been used for quantitative estimation of different phases present in KAMINI fuel. Image analysis results have been summarised and presented in this paper. (author)

Criteria for operator review of workplace changes

International Nuclear Information System (INIS)

Davey, E.

2000-01-01

A set of criteria for reviewing workplace changes has been developed for use by plant Operations staff. The criteria were developed to provide Operations staff with a practical framework for structuring assessments and subsequent review comments with regard to control room modifications and innovations that impact their work environment. The criteria were assembled from design, operations and human factors engineering principles, and system review experiences with plant Operations staff over the past ten years. Operations staff at several CANDU stations helped shape the emphasis for initial criteria definition and have assisted with criteria refinement through trial applications. Use of the criteria is expected to lead to more effective and task relevant equipment evaluations by Operations staff, and ultimately lead to system modifications and innovations that better serve plant operation needs. The paper begins with a discussion of the rationale for criteria development and the attributes of 'good' design. The balance of the paper outlines the project objectives, describes the approach applied in assembling, structuring, and refining the review criteria, and illustrates the application of the criteria in the review of a proposed control room innovation. (author)

A Method to Improve the Software Acceptance Criteria for Nuclear Power Plants

International Nuclear Information System (INIS)

Suh, Yong Suk; Park, Heui Youn; Son, Ki Sung; Lee, Ki Hyun; Kim, Hyeon Soo

2005-01-01

The license is a mandatory process required by a governmental authority and the certification is a voluntary process administrated by a professional community. A software certification is a result of an assessment that the certified software conforms to required criteria or standards. The certification is used as a committed promise to produce a high quality software, so software acquirers are requiring it from their suppliers. For example, US DoD (Department of Defense) requires an achievement of CMMI-SW (Capability Maturity Model Integration-Software) certification for participating in a major military software project. It is commonly said that the purpose of achieving a certification is to improve the product quality. In the nuclear area, a software certification has been rarely concerned with or required for the software used in a safety function of NPPs (Nuclear Power Plants). The safety critical software for NPPs is accepted by the nuclear regulators when the following three criteria are met: acceptable plans should be prepared to control the software development activities, the plans should be followed in an acceptable software life cycle, and the process should produce acceptable design outputs. The acceptance criteria are so abstractive that the nuclear regulators may assess the software development plans, activities, outputs based on their subjective engineering judgments. This is inevitable because a software has invisible or intangible characteristics. It is hard to assess the totality of a software prior to running it. These have caused the judgments to be biased. The regulators may want some objectiveness in assessing how much capability for software development the supplier possesses. In that case, the software certification can assist them for such an assessment. This paper proposes a method to improve the software acceptance criteria by applying the software certification to the criteria. This will assist the regulators to assess the supplier

Quality criteria for chest X-ray image

International Nuclear Information System (INIS)

Krieg, R.

1985-01-01

A distinction has to be made between invariable and variable criteria in the determination of chest X-ray picture quality criteria. The invariable criteria are defined by the properties of the object and the psychophysiological laws of perception and cognition, and the variable criteria are determined by the prevailing state of the art of technology. An agreement on these criteria is based on the knowledge of the nature and the technical conditions of X-ray picture production and reproduction. The slogan 'the best picture at the lowest dose' dominates, too, the discussion centering around the X-ray picture of the chest, its quality and criteria. (orig./MG) [de