WorldWideScience

Sample records for purasiv s process

  1. s-process chronometers

    International Nuclear Information System (INIS)

    Beer, H.

    1983-01-01

    The radionuclei 40 K, 81 Kr, 87 Rb, 93 Zr, 107 Pd, 147 Sm, 176 Lu and 205 Pb are built up totally or partially by the s-process. Due to their long half life they are potential chronometers for the age and the development of the s-process. The usefulness of the various nuclei is discussed. For the determination of the mean age of the s-process synthesis and with it the age of the galaxy, 176 Lu is best suited. It is demonstrated that this age can be calculated solely from measured cross section and abundance ratios. Various effects which can limit the usefulness of 176 Lu as a clock are discussed. (orig.) [de

  2. Radiation processing in the U.S.S.R.

    Science.gov (United States)

    Pikaev, A. K.

    The present paper is a short review of the modern status of radiation processing in the U.S.S.R. Data on ionizing radiation sources used in radiation processing are reported. The main directions of the development of this field of technology: radiation modification of materials, radiation curing of coatings, radiation-chemical methods of synthesis, radiation sterilization of medical products, radiation treatment of food, application of ionizing radiation for the solution of ecological problems etc. -are considered.

  3. Asynchronous stream processing with S-Net

    NARCIS (Netherlands)

    Grelck, C.; Scholz, S.-B.; Shafarenko, A.

    2010-01-01

    We present the rationale and design of S-Net, a coordination language for asynchronous stream processing. The language achieves a near-complete separation between the application code, written in any conventional programming language, and the coordination/communication code written in S-Net. Our

  4. Fabricating an S&OP Process

    DEFF Research Database (Denmark)

    Lichen, Alex Yu

    , constituents of the S&OP process are dispersed in diverse local times and spaces rather than being coordinated in a single time and space by the group demand chain. Accounting is a set of matters of concern. The S&OP process and its purpose of integration come from an “absolute nothingness” – its minimal......Inspired by Latour’s (2005a) notion of matters of concern and M.C. Escher’s Circle Limit III as a representation of the Poincaré Disk, this study follows how an S&OP process was fabricated in a large Swedish manufacturing company. The study claims that when actors are fabricating the S&OP process......, local actors create emergent, ongoing and multiple matters of concern around it. The group demand chain, the actor who is responsible for guiding the implementation of the process, delegates the attempts to close these matters of concern to local actors located in separate times and spaces. As a result...

  5. Bistatic sAR data processing algorithms

    CERN Document Server

    Qiu, Xiaolan; Hu, Donghui

    2013-01-01

    Synthetic Aperture Radar (SAR) is critical for remote sensing. It works day and night, in good weather or bad. Bistatic SAR is a new kind of SAR system, where the transmitter and receiver are placed on two separate platforms. Bistatic SAR is one of the most important trends in SAR development, as the technology renders SAR more flexible and safer when used in military environments. Imaging is one of the most difficult and important aspects of bistatic SAR data processing. Although traditional SAR signal processing is fully developed, bistatic SAR has a more complex system structure, so sign

  6. Inflammatory Process in Alzheimer’s Disease

    Directory of Open Access Journals (Sweden)

    MARCO ANTONIO eMERAZ RIOS

    2013-08-01

    Full Text Available Alzheimer Disease (AD is a neurodegenerative disorder and the most common form of dementia. Histopathologically is characterized by the presence of two major hallmarks, the intracellular neurofibrillary tangles (NFTs and extracellular neuritic plaques (NPs surrounded by activated astrocytes and microglia. NFTs consist of paired helical filaments of truncated tau protein that is abnormally hyperphosphorylated. The main component in the NP is the amyloid-β peptide (Aβ, a small fragment of 40-42 amino acids with a molecular weight of 4kD. It has been proposed that the amyloid aggregates and microglia activation are able to favor the neurodegenerative process observed in AD patients. However, the role of inflammation in AD is controversial, because in early stages the inflammation could have a beneficial role in the pathology, since it has been thought that the microglia and astrocytes activated could be involved in Aβ clearance. Nevertheless the chronic activation of the microglia has been related with an increase of Aβ and possibly with tau phosphorylation. Studies in AD brains have shown an upregulation of complement molecules, pro-inflammatory cytokines, acute phase reactants and other inflammatory mediators that could contribute with the neurodegenerative process. Clinical trials and animal models with nonsteroidal anti-inflammatory drugs (NSAIDs indicate that these drugs may decrease the risk of developing AD and apparently reduce Aβ deposition. Finally, further studies are needed to determine whether treatment with anti-inflammatory strategies, may decrease the neurodegenerative process that affects these patients.

  7. S-process studies using single and pulsed neutron exposures

    Science.gov (United States)

    Beer, H.

    The formation of heavy elements by slow neutron capture (s-process) is investigated. A pulsed neutron irradiation leading to an exponential exposure distribution is dominant for nuclei from A = 90 to 200. For the isotopes from iron to zirconium an additional 'weak' s-process component must be superimposed. Calculations using a single or another pulsed neutron exposure for this component have been carried out in order to reproduce the abundance pattern of the s-only and s-process dominant isotopes. For the adjustment of these calculations to the empirical values, the inclusion of new capture cross section data on Se76 and Y89 and the consideration of the branchings at Ni63, Se79, and Kr85 was important. The combination of an s-process with a single and a pulsed neutron exposure yielded a better representation of empirical abundances than a two component pulsed s-process.

  8. S-process studies using single and pulsed neutron exposures

    International Nuclear Information System (INIS)

    Beer, H.

    1986-01-01

    The formation of heavy elements by slow neutron capture (s-process) is investigated. A pulsed neutron irradiation leading to an exponential exposure distribution is dominant for nuclei from A=90 to 200. For the isotopes from iron to zirconium an additional ''weak'' s-process component must be superimposed. Calculations using a single or another pulsed neutron exposure for this component have been carried out in order to reproduce the abundance pattern of the s-only and s-process dominant isotopes. For the adjustment of these calculations to the empirical values, including new capture cross section data on Se76 and Y89 and the consideration of the branchings at Ni63, Se79, and Kr85 was important. The combination of a s-process with a single and a pulsed neutron exposure yielded a better representation of empirical abundances than a two component pulsed s-process

  9. Stellar neutron capture rates and the s process

    Directory of Open Access Journals (Sweden)

    Käppeler F.

    2012-02-01

    Full Text Available Neutron reactions are responsible for the formation of the elements heavier than iron. The corresponding scenarios relate to helium burning in Red Giant stars (s process and to supernova explosions (r and p processes. The s process, which operates in or near the valley of β-stability, has produced about half of the elemental abundances between Fe and Bi. Accurate (n, γ cross sections are the essential input for s process studies, because they determine the abundances produced by that process. Following a brief summary of the neutron capture processes, the focus will be set on the s process in massive stars, where the role of reliable cross section information is particularly important. Eventually, the intriguing aspects of the origin of 60Fe will be addressed. Attempts to determine the stellar cross section of that isotope are pushing experimental possibilities to their limits and present a pertinent challenge for future facilities.

  10. Test processing integrated system (S.I.D.E.X.)

    International Nuclear Information System (INIS)

    Sabas, M.; Oules, H.; Badel, D.

    1969-01-01

    The Test Processing Integrated System is mostly composed of a CAE 9080 (equiv. S. D. S. 9300) computer which is equipped of a 100 000 samples/sec acquisition system. The System is designed for high speed data acquisition and data processing on environment tests, and also calculation of structural models. Such a digital appliance on data processing has many advantages compared to the conventional methods based on analog instruments. (author) [fr

  11. Kinetics and mechanism of synthetic CoS oxidation process

    Directory of Open Access Journals (Sweden)

    Štrbac N.

    2006-01-01

    Full Text Available The results of investigation of kinetics and mechanism for synthetic a-CoS oxidation process are presented in this paper. Based on experimental data obtained using DTA and XRD analysis and constructed PSD diagrams for Co-S-O system, mechanism of synthetic a-CoS oxidation process is suggested. Characteristic kinetic parameters were obtained for experimental isothermal investigations of desulfurization degree using Sharp method.

  12. Dy163-Ho163 branching: an s-process barometer

    International Nuclear Information System (INIS)

    Beer, H.; Walter, G.; Macklin, R.L.

    1984-01-01

    The neutron capture cross sections of Dy163 and Er164 have been measured to analyze the s-process branching at Dy163-Ho163. The reproduction of the s-process abundance of Er164 via this branching is sensitive to temperature kT, neutron density, and electron density n/sub e/. The calculations using information from other branchings on kT and the neutron density n/sub n/ give constraints for n/sub e/ at the site of the s-process

  13. Origin of the solar system s-process abundances

    International Nuclear Information System (INIS)

    Malaney, R.A.; Boothroyd, A.I.

    1987-01-01

    In the search for the origin of the solar system s-process abundances much attention has been focused on the intershell zones of thermally pulsing asymptotic giant branch (AGB) stars. It has recently been suggested that, relative to the poor fits obtained from intermediate-mass AGB models, low-mass AGB models may result in much better fits to the observed solar system abundances. This suggestion was motivated by the high intershell base temperatures indicated by recent low-mass AGB calculations. Using new data, presented for the peak intershell base temperature in such stars, the s-process enhancements occurring in the intershell zones of low-mass AGB stars are calculated. A nonsolar distribution of s-process abundances is reported for all realistic AGB models studied. Other possible astrophysical sites for the origin of the solar system s-process abundances are discussed. 35 references

  14. Nuclear information needs for the astrophysical s-process

    Energy Technology Data Exchange (ETDEWEB)

    Mathews, G.J.; Howard, W.M.; Takahashi, K.; Ward, R.A.

    1986-01-01

    The astrophysical s-process is a sequence of neutron-capture and beta-decay reactions on a slow time scale compared to beta-decay lifetimes near the line of stability. This detailed sequence of neutron capture, continuum and bound-state beta decay, positron decay, and electron-capture reactions that comprise the s-process has been studied for a broad range of astrophysical environments. The results are then compared with the solar-system abundancies of heavy elements to determine the range of physical conditions responsible for their nucleosynthesis. The nuclear data needs are extensive but have begun to be precise enough to allow for a consistent interpretation of the astrophysical site for the s-process.

  15. Nuclear information needs for the astrophysical s-process

    Energy Technology Data Exchange (ETDEWEB)

    Mathews, G.J.; Howard, W.M.; Takahashi, K.; Ward, R.A.

    1985-05-01

    The astrophysical s-process is a sequence of neutron-capture and beta-decay reactions on a slow time scale compared to beta-decay lifetimes near the line of stability. We systematically study this detailed sequence of neutron capture, continuum and bound-state beta decay, positron decay, and electron-capture reactions that comprise the s-process for a broad range of astrophysical environments. Our results are then compared with the solar-system abundances of heavy elements to determine the range of physical conditions responsible for their nucleosynthesis. The nuclear data needs are extensive but have begun to be precise enough to allow for a consistent interpretation of the astrophysical site for the s-process.

  16. Gyarmati’s Variational Principle of Dissipative Processes

    Directory of Open Access Journals (Sweden)

    József Verhás

    2014-04-01

    Full Text Available Like in mechanics and electrodynamics, the fundamental laws of the thermodynamics of dissipative processes can be compressed into Gyarmati’s variational principle. This variational principle both in its differential (local and in integral (global forms was formulated by Gyarmati in 1965. The consistent application of both the local and the global forms of Gyarmati’s principle provides all the advantages throughout explicating the theory of irreversible thermodynamics that are provided in the study of mechanics and electrodynamics by the corresponding classical variational principles, e.g., Gauss’ differential principle of least constraint or Hamilton’s integral principle.

  17. Assessing the Army’s Software Patch Management Process

    Science.gov (United States)

    2016-03-04

    software maker or to antivirus vendors (Zetter, 2014). Fixing such a vulnerability within the zero-day period requires teamwork across multiple...Assessing the Army’s Software Patch Management Process Benjamin Alan Pryor March 4, 2016 PUBLISHED...19 Commercial-Off-the-Shelf Software

  18. High pressure processing reaches the U.S. market

    International Nuclear Information System (INIS)

    Mermelstein, N.H.

    1997-01-01

    The first food product commercially produced by a U.S. company using high-pressure processing has had successful test market results. High-pressure processing permits food to be preserved by subjecting it to pressures in the range of 60,000-100,000 psi for a short time instead of exposing the food to heat, freezing, chemicals, or irradiation. To produce Classic Guacamole, Avomex of Keller, Texas, uses a batch isostatic press to deactivate the enzymes in the avocado and to kill bacteria, obtaining a refrigerated shelf life of over 30 days. The guacamole is then vacuum packed and processed again. The product undergoes no heat treatment and does not contain preservatives, and the high pressure does not affect its texture, color, or taste. Meanwhile, a continuous system for high-pressure processing of pumpable foods is currently being developed by Flow International of Kent, Washington, and will be used for testing and applications work at Oregon State University

  19. Teacher’s leadership in learning processes at kindergartens

    Directory of Open Access Journals (Sweden)

    Maria Dominika Niron

    2017-09-01

    Full Text Available The aim of this study was to find out the effective kindergarten teacher’s behaviour in influencing, mobilizing, and developing students in teaching learning process. This research was phenomenological qualitative research. The main instruments of this research were the researcher and observation manual. The focus of this research was the way teachers teach in the learning process in group A of Indriyasana Kindergarten, Indriarini Kindergarten, and ABA Pokoh Kindergarten. The data validity of this research was tested by using repeated observation, resource triangulation, and technique triangulation. The componential data was analyzed by employing inductive technique from Spradley’s qualitative model and Miles and Huberman analysis model. The result of the research showed that teacher’s effective ways to influence, mobilize, and develop students in teaching learning process are as follows: 1. Reciting yell, clap yell, and asking students to sing. The content of yell, clap yell, and song was appropriate with values which were developed based on vision, mission, and the goal of Kindergarten institution. Yells, clap yell, and song were democratic and they were the form of the value of learning leadership. 2. In some situations, there was a tendency where the teacher used more autocratic way to influence, mobilize, and develop students in learning process such as the verbal way in which teacher call students’ name and non-verbal way in which teacher put his index finger on his lip as a sign to ask students to be quiet. The other non-verbal ways were: shaking head as a sign of disagreement, raising thumb as a sign of reinforcement, and nodding as a sign of agreement. Sometimes, teachers also used laissez-fair methods such as neglecting students/letting students behave as they want. Keywords: leadership, teacher’s leadership behaviour, learning process in Kindergarten

  20. U.S. licensing process and ABWR certification

    International Nuclear Information System (INIS)

    Quirk, J.F.; Williams, W.A.

    1996-01-01

    Part 50 of Title 10 of the Code of Federal Regulation (CFR) establishes a two-step licensing process by which the U.S. Nuclear Regulatory Committee (NRC) authorizes nuclear reactor plant construction through issuance of a construction permit and authorizes operation by issuance of an operating license. At each stage, the NRC Staff conducts technical reviews and there is potential for public hearings. In 1989, the NRC issued a new, simplified licensing process: Part 52. The purpose of the Part 52 licensing process is to provide a regulatory framework that brings about earlier resolution of licensing issues. Because issues are not resolved early in the Part 50 licensing process, approval of an operating license is not assured until after a significant investment has been made in the plant. Part 52 increases the stability and certainty of the licensing process by providing for the early resolution of safety and environmental issues. The Part 52 licensing process features (1) early site permits, (2) design certification, and (3) combined construction permit and operating licenses. As part of the U.S. Advanced Light Water Reactor (ALWR) Program to revitalize the nuclear option through the integration of government/utility/industry efforts, GE undertook the role of applying for certification for its latest product line, the Advanced Boiling Water Reactor (ABWR), under the U.S. ABWR certification program. The ABWR design is an essentially complete plant. Initial application for design certification was in 1987 under Part 50. GE reapplied in late 1991 under the newly promulgated Part 52. Following seven years of intensive interactions with the NRC and ACRS, GE was awarded the first Final Design Approval (FDA) under Part 52. The Commission initiated rulemaking by publishing the proposed ABWR Certification Rule in the Federal Register in early 1995. Certification is anticipated mid-1996. (J.P.N.)

  1. Farmer’s Motivation in Aren Sugar Processing Business

    Science.gov (United States)

    Abdullah, W. G.; Rianse, U.; Muhidin; Widayati, W.; Mihrad, E. S.; Taridala, S. A. A.; Rianse, I. S.; Baka, W. K.

    2018-02-01

    The objectives of the research were to analyze socio-economic characteristics and motivation of farmers in aren sugar processing business in Kolaka District, Southeast Sulawesi, Indonesia. The analysis used in this research was quantitative descriptive analysis. The results showed that average state of socio-economic characteristics of aren sugar farmer that were in the category of productive age, which was 46.12 years old, has fulfil basic education category (9 years education), low category of dependents as many as three people, the Average experience of aren sugar processing business during 18 years, and the average aren trees were tapped as much as seven trees, every day, (b) farmer’s motivation in aren sugar processing business in low category, with the indicator is the motive of imitation, economic, security, affiliations, awards, and self-actualization.

  2. Decolorization of Diazo Dye Ponceau S by Fenton Process

    Directory of Open Access Journals (Sweden)

    Muhammad Muslim

    2013-12-01

    Full Text Available An attempt has been taken to decolorize and mineralize Ponceau S (PS, a diazo dye, in aqueous solution by Fenton process. Effects of solution pH, concentrations of H2O2, Fe(II and PS on the decolorization of PS have also been studied through batch experiments. About 90% decolorization was found under the optimal conditions [PS]: [H2O2]: [Fe(II] = 1:12:2 and [H2O2]/[Fe(II] = 6 at pH 2.85 in 40 minutes. The overall results revealed that mineralization was rather slower as compared with the decolorization.

  3. Trapping processes in CaS:Eu2+,Tm3+

    International Nuclear Information System (INIS)

    Jia, Dongdong; Jia, Weiyi; Evans, D. R.; Dennis, W. M.; Liu, Huimin; Zhu, Jing; Yen, W. M.

    2000-01-01

    CaS:Eu 2+ ,Tm 3+ is a persistent red phosphor. Thermoluminescence was measured under different excitation and thermal treatment conditions. The results reveal that the charge defects, created by substituting Tm 3+ for Ca 2+ , serve as hole traps for the afterglow at room temperature. Tm 3+ plays the role of deep electron trapping centers, capturing electrons either through the conduction band or directly from the excited Eu 2+ ions. These two processes, in which two different sites of Tm 3+ are involved, correspond to two traps with different depths. (c) 2000 American Institute of Physics

  4. The AdS/QCD Correspondence and Exclusive Processes

    International Nuclear Information System (INIS)

    Brodsky, Stanley

    2010-01-01

    The AdS/CFT correspondence between theories in AdS space and conformal field theories in physical space-time provides an analytic, semi-classical, color-confining model for strongly-coupled QCD. The soft-wall AdS/QCD model modified by a positive-sign dilaton metric leads to a remarkable one-parameter description of nonperturbative hadron dynamics at zero quark mass, including a zero-mass pion and a Regge spectrum of linear trajectories with the same slope in orbital angular momentum L and radial quantum number n for both mesons and baryons. One also predicts the form of the non-perturbative effective coupling α s AdS (q) and its β-function which agrees with the effective coupling α ga extracted from the Bjorken sum rule. Light-front holography, which connects the fifth-dimensional coordinate of AdS space z to an invariant impact separation variable ζ, allows one to compute the analytic form of the frame-independent light-front wavefunctions, the fundamental entities which encode hadron properties as well as decay constants, form factors, deeply virtual Compton scattering, exclusive heavy hadron decays and other exclusive scattering amplitudes. One thus obtains a relativistic description of hadrons in QCD at the amplitude level with dimensional counting for hard exclusive reactions at high momentum transfer. As specific examples we discuss the behavior of the pion and nucleon form factors in the space-like and time-like regions. We also review the phenomenology of exclusive processes including some anomalous empirical results.

  5. The S-Process Branching-Point at 205PB

    Science.gov (United States)

    Tonchev, Anton; Tsoneva, N.; Bhatia, C.; Arnold, C. W.; Goriely, S.; Hammond, S. L.; Kelley, J. H.; Kwan, E.; Lenske, H.; Piekarewicz, J.; Raut, R.; Rusev, G.; Shizuma, T.; Tornow, W.

    2017-09-01

    Accurate neutron-capture cross sections for radioactive nuclei near the line of beta stability are crucial for understanding s-process nucleosynthesis. However, neutron-capture cross sections for short-lived radionuclides are difficult to measure due to the fact that the measurements require both highly radioactive samples and intense neutron sources. We consider photon scattering using monoenergetic and 100% linearly polarized photon beams to obtain the photoabsorption cross section on 206Pb below the neutron separation energy. This observable becomes an essential ingredient in the Hauser-Feshbach statistical model for calculations of capture cross sections on 205Pb. The newly obtained photoabsorption information is also used to estimate the Maxwellian-averaged radiative cross section of 205Pb(n,g)206Pb at 30 keV. The astrophysical impact of this measurement on s-process nucleosynthesis will be discussed. This work was performed under the auspices of US DOE by LLNL under Contract DE-AC52-07NA27344.

  6. Heap leaching of Cu contaminated soil with [S,S]-EDDS in a closed process loop

    International Nuclear Information System (INIS)

    Finzgar, Neza; Zumer, Alenka; Lestan, Domen

    2006-01-01

    Heap leaching of Cu contaminated soil (412 ± 11 mg kg -1 ) with 5 mmol kg -1 ethylenediamine disuccinate [S,S]-EDDS as a chelator was tested in a laboratory-scale soil column study. The washing solution was recycled in a closed process loop after microbial (using a microbially active permeable bed, composed of substrate and absorbent) and oxidative chemical (using combined ozonation and UV irradiation) degradation of metal-[S,S]-EDDS complexes and retention of released Cu on a commercial absorbent Slovakite. Heap leaching using the permeable bed removed 25.5 ± 3.6% of initial total Cu from the soil. Ozone/UV treatment of the [S,S]-EDDS washing solution removed much more, 47.5 ± 7.4%, of Cu. Both methods yielded a clear and colorless final (waste) washing solution, with 7.0 ± 10.0 and 2.6 ± 0.7 mg L -1 Cu (permeable bed and ozone/UV method, respectively). The results of our study indicate that chemical treatment of chelator washing solution with ozone/UV in a closed process loop could lead to the development of a new, efficient and environmentally safe remediation method with controllable Cu emissions

  7. Stellar neutron sources and s-process in massive stars

    Science.gov (United States)

    Talwar, Rashi

    The s-process or the slow neutron capture process is a nucleosynthesis process taking place at relatively low neutron densities in stars. It runs along the valley of beta stability since the neutron capture rate is much slower compared to the beta decay rate. The s-process occurs mainly during core helium burning and shell carbon burning phase in massive stars and during thermally pulsing helium burning phase in asymptotic giant-branch stars. The potential stellar neutron source for the s-process is associated with alpha-capture reactions on light nuclei. The capture-reaction rates provide the reaction flow for the build-up of22Ne neutron source during the heliumburning phase in these stars. The low energy 26Mg resonances at stellar energies below 800 keV are predicted to have a critical influence on the alpha-capture rates on 22Ne. Some of these resonances may also correspond to pronounced alpha cluster structure near the alpha-threshold. However, these resonances have remained elusive during direct alpha capture measurements owing to the high Coulomb barrier and background from cosmic rays and beam induced reactions. Hence, in the present work, alpha-inelastic scattering and alpha- transfer measurements have been performed to probe the level structure of 26Mg nucleus in order to determine the 22Ne+alpha-capture rates. Both experiments have been performed using the high-resolution Grand Raiden Spectrometer at the Research Center for Nuclear Physics (RCNP), Osaka, Japan. For the alpha-inelastic scattering measurement, a self-supporting solid 26Mg target was used and for the alpha-transfer study via the (6Li,d) reaction, 22Ne gas enclosed in a gas cell with Aramid windows was used. The reaction products were momentum analysed by the spectrometer and detected at the focal plane equipped with two multi-wire drift chambers and two plastic-scintillation detectors. The focal plane detection system provided information on the position, the angle, the time of flight and

  8. Communication activities for NUMO's site selection process

    International Nuclear Information System (INIS)

    Takeuchi, Mitsuo; Okuyama, Shigeru; Kitayama, Kazumi; Kuba, Michiyoshi

    2004-01-01

    A siting program for geological disposal of high-level radioactive waste (HLW) in Japan has just started and is moving into a new stage of communication with the public. A final repository site will be selected via a stepwise process, as stipulated in the Specified Radioactive Waste Final Disposal Act promulgated in June 2000. Based on the Act, the site selection process of the Nuclear Waste Management Organization of Japan (NUMO, established in October 2000) will be carried out in the three steps: selection of Preliminary Investigation Areas (PIAs), selection of Detailed Investigation Areas (DIAs) and selection of the Repository Site. The Act also defines NUMO's responsibilities in terms of implementing the HLW disposal program in an open and transparent manner. NUMO fully understands the importance of public participation in its activities and is aiming to promote public involvement in the process of site selection based on a fundamental policy, which consists of 'adopting a stepwise approach', 'respecting the initiative of municipalities' and 'ensuring transparency in information disclosure'. This policy is clearly reflected in the adoption of an open solicitation approach for volunteer municipalities for Preliminary Investigation Areas (PIAs). NUMO made the official announcement of the start of its open solicitation program on 19 December 2002. This paper outlines how NUMO's activities are currently carried out with a view to encouraging municipalities to volunteer as PIAs and how public awareness of the safety of the HLW disposal is evaluated at this stage

  9. New experimental developments for s- and p-process research

    Science.gov (United States)

    Reifarth, R.; Ershova, O.; Glorius, J.; Göbel, K.; Langer, C.; Meusel, O.; Plag, R.; Schmidt, S.; Sonnabend, K.; Heil, M.

    2012-12-01

    Almost all of the heavy elements are produced via neutron-induced processes in a multitude of stellar production sites. The remaining minor part is produced via photon- and proton-induced reactions. The predictive power of the underlying stellar models is currently limited because they contain poorly constrained physics components such as convection, rotation or magnetic fields. An important tool to determine such components is the comparison of observed with modeled abundance distributions based on improved nuclear physics input. The FRANZ facility at the Goethe University Frankfurt, which is currently under construction will provide unprecedented neutron fluxes and proton currents available for nuclear astrophysics. It will be possible to investigate important branchpoint nuclei of the s-process nucleosynthesis path and proton-induced reactions important for p-process modeling. At the GSI close to Darmstadt radioactive isotopes can be investigated in inverse kinematics. This allows experiments such as proton-induced cross section measurements using a heavy-ion storage ring or measurements of gamma-induced reactions using the Coulomb dissociation method. The future FAIR facility will allow similar experiments on very exotic nuclei, since orders of magnitude higher radioactive ions beams will be possible.

  10. Positively Biased Processing of Mother’s Emotions Predicts Children’s Social and Emotional Functioning

    Science.gov (United States)

    Donohue, Meghan Rose; Goodman, Sherryl H.; Tully, Erin C.

    2016-01-01

    Risk for internalizing problems and social skills deficits likely emerges in early childhood when emotion processing and social competencies are developing. Positively biased processing of social information is typical during early childhood and may be protective against poorer psychosocial outcomes. We tested the hypothesis that young children with relatively less positively biased attention to, interpretations of, and attributions for their mother’s emotions would exhibit poorer prosocial skills and more internalizing problems. A sample of 4- to 6-year-old children (N=82) observed their mothers express happiness, sadness and anger during a simulated emotional phone conversation. Children’s attention to their mother when she expressed each emotion was rated from video. Immediately following the phone conversation, children were asked questions about the conversation to assess their interpretations of the intensity of mother’s emotions and misattributions of personal responsibility for her emotions. Children’s prosocial skills and internalizing problems were assessed using mother-report rating scales. Interpretations of mother’s positive emotions as relatively less intense than her negative emotions, misattributions of personal responsibility for her negative emotions, and lack of misattributions of personal responsibility for her positive emotions were associated with poorer prosocial skills. Children who attended relatively less to mother’s positive than her negative emotions had higher levels of internalizing problems. These findings suggest that children’s attention to, interpretations of, and attributions for their mother’s emotions may be important targets of early interventions for preventing prosocial skills deficits and internalizing problems. PMID:28348456

  11. Decolorization of Diazo Dye Ponceau S by Fenton Process

    International Nuclear Information System (INIS)

    Muslim, M.; Habib, M.A.; Islam, T.S.A.; Mahmood, A.J.; Ismail, I.M.I.

    2013-01-01

    An attempt has been taken to decolorize and mineralize Ponceau S (PS), a diazo dye, in aqueous solution by Fenton process. Effects of solution pH, concentrations of H/sub 2/O/sub 2/, Fe(II) and PS on the decolorization of PS have also been studied through batch experiments. About 90percentage decolorization was found under the optimal conditions (PS): (H/sub 2/O/sub 2/): (Fe(II)) = 1:12:2 and (H/sub 2/O/sub 2/)/(Fe(II)) = 6 at pH 2.85 in 40 minutes. The overall results revealed that mineralization was rather slower as compared with the decolorization. (author)

  12. CITIZEN’S PARTICIPATION IN THE PROCESS OF PUBLIC ADMINISTRATION

    Directory of Open Access Journals (Sweden)

    FOTESCU VASILE

    2015-09-01

    Full Text Available The author reveals, in the article, the importance of transparency in the process of public administration. In the centre of attention is the citizen, who has the right to access information, the right to make his opinion known, and the right to take part in the decisional process. The citizen’s participation supposes the realization of four requirements: transparency of administra­tion, passing on the information, reception of information and the involvement of the citizen in the decisional act. Further is analysed the normative act: «The Law regarding transparency in the decisionalprocess» no 239-XV approved on 13.11.2008. The author suggests ways of improving it. There are revealed some of the recommendations mentioned in « The white Book of Good Governing» elaborated by the European Commission, where are discussed the basic principles, which should be respected by the public authorities, as well as the procedures of public consultation within the European Union. In conclusion the author considers that the Government of the Republic of Moldova has undertaken a series of complex activities regarding institutional transparency, but we cannot yet speak about a productive dialogue between the public autho­rities and citizens.

  13. An 80 Mbytes/s data transfer and processing system

    International Nuclear Information System (INIS)

    Belusevic, R.; Nixon, G.; Shaw, D.

    1990-05-01

    We describe hardware and software aspects of a very fast and versatile, yet conceptually simple, data transfer and processing system for use with future accelerators. It consists of a transputer-based crate controller (CC), which includes an Intel i860 microcomputer, and of a set of readout cards (RC), each containing a digital signal processor (DSP) for fast data parametrisation and compaction. The reduced data is written into a dual port memory (DPM), where it can be accessed concurrently by the transputer and transferred to a common DPM on the CC card. A crateful of data thus assembled at one place can further be processed by the powerful i860 microcomputer. Address generators (simple binary counters) are included on the crate controller and each readout card to enable direct memory access (DMA) operations, resulting in a considerable increase in data transfer speed (maximum 80 Mbytes/s). The use of a transputer as the sole controller processor, in conjunction with DPMs, renders bus arbitration unnecessary leading to very simple interfacing logic and operating software. The four high speed serial links of the transputer greatly facilitate downloading of programs and intercrate communications. An Intel i960CA processor, situated on the CC card, is used for fast data transfer between crates by means of its 32-bit wide DMA channel. The operating software is written in the Occam language, which was specially developed for programming concurrent systems based on transputers. (author)

  14. An 80 Mbytes/s data transfer and processing system

    International Nuclear Information System (INIS)

    Belusevic, R.; Nixon, G.; Shaw, D.

    1990-01-01

    We describe hardware and software aspects of a very fast and versatile, yet conceptually simple, data transfer and processing system for use with future accelerators. It consists of a transputer-based crate controller (CC), which includes an Intel i860 microcomputer, and of a set of readout cards (RC), each containing a digital signal processor (DSP) for fast data parametrisation and compaction. The reduced data is written into a dual port memory (DPM), where it can be accessed concurrently by the transputer and transferred to a common DPM on the CC card. A crateful of data thus assembled at one place can further be processed by the powerful i860 microcomputer. Address generators (simple binary counters) are included on the crate controller and each readout card to enable direct memory access (DMA) operations, resulting in a considerable increase in data transfer speed (maximum 80 Mbytes/s). The use of a transputer as the sole controlling processor, in conjunction with DPMs, renders bus arbitration unnecessary, leading to very simple interfacing logic and operating software. The four high-speed serial links of the transputer greatly facilitate downloading of programs and intercrate communications. An Intel i960CA processor, situated on the CC card, is used for fast data transfer between crates by means of its 32-bit wide DMA channel. The operating software is written in the Occam language, which was specially developed for programming concurrent systems based on transputers. (orig.)

  15. Welding thermal cycle-triggered precipitation processes in steel S700MC subjected to the thermo-mechanical control processing

    OpenAIRE

    Górka J.

    2017-01-01

    This study presents tests concerned with welding thermal process-induced precipitation processes taking place in 10 mm thick steel S700MC subjected to the Thermo-Mechanical Control Process (TMCP) with accelerated cooling. The thermomechanical processing of steel S700MC leads to its refinement, structural defects and solutioning with hardening constituents. Tests of thin foils performed using a transmission electron microscope revealed that the hardening of steel S700MC was primarily caused by...

  16. 512-S Facility, Actinide Removal Process Radiological Design Summary Report

    International Nuclear Information System (INIS)

    Nathan, S.J.

    2004-01-01

    This report contains top-level requirements for the various areas of radiological protection for workers. Detailed quotations of the requirements for applicable regulatory documents can be found in the Radiological Design Summary Report Implementation Guide. For the purposes of demonstrating compliance with these requirements, per Engineering Standard 01064, ''shall consider / shall evaluate'' indicates that the designer must examine the requirement for the design and either incorporate or provide a technical justification as to why the requirement is not incorporated. This report describes how the Building 512-S, Actinide Removal Process meets the required radiological design criteria and requirements based on 10CFR835, DOE Order 420.1A, WSRC Manual 5Q and various other DOE guides and handbooks. The analyses supporting this Radiological Design Summary Report initially used a source term of 10.6 Ci/gallon of Cs-137 as the basis for bulk shielding calculations. As the project evolved, the source term was reduced to 1.1 Ci/gallon of Cs-137. This latter source term forms the basis for later dose rate evaluations

  17. The Role(s) of Process Models in Design Practice

    DEFF Research Database (Denmark)

    Iversen, Søren; Jensen, Mads Kunø Nyegaard; Vistisen, Peter

    2018-01-01

    This paper investigates how design process models are implemented and used in design-driven organisations. The archetypical theoretical framing of process models, describe their primary role as guiding the design process, and assign roles and deliverables throughout the process. We hypothesise...... that the process models also take more communicative roles in practice, both in terms of creating an internal design rationale, as well as demystifying the black box of design thinking to external stakeholders. We investigate this hypothesis through an interview study of four major danish design......-driven organisations, and analyse the different roles their archetypical process models take in their organisations. The main contribution is the identification of three, often overlapping roles, which design process models showed to assume in design-driven organisations: process guidance, adding transparency...

  18. S.H.A.S.T. and Tele-bio-sphere: Investigative Processes as Artistic Practices

    Directory of Open Access Journals (Sweden)

    Maria Luiza Fragoso

    2016-02-01

    Full Text Available The subjects herein addressed make part of a series of lectures and workshops developed by me along with the team of the New Organisms Art Nucleus (NANO during the last two years (2013-2015. So, examples of methodological processes applied in the various activities we have developed with undergraduate and graduate students will be presented. The importance I attach to these issues is directly related to the academic practice as well as to the artistic production derived from creation processes, aiming at systematizing and expanding knowledge in the realm of arts and technology, being all of it addressed from a cross-cultural approach. Thus I intend to bring some viewpoints that may feed the discussion between arts and sciences, from an experimental and trans-disciplinary approach, proposing the concepts of hybridity and bio-telematics, so as to illustrate the methodological procedures applied in the artistic projects S.H.A.S.T. and Tele-bio-sphere. http://nano.eba.ufrj.br

  19. U.S. Trade and Investment Policy Making Process

    Science.gov (United States)

    Overall, EPA’s trade and environment policy organization is designed to create a flexible and collaborative mechanism so that EPA can participate fully and effectively in the development and implementation of U.S. trade and environment policy.

  20. Acceleration Processes in the Earth’s Magnetosphere.

    Science.gov (United States)

    1985-05-17

    Hada, T. and T. Terasawa, Nonlinear evolution of low frequency waves in the foreshock region of earth’s bow shock, American Geophysical Union...low-frequency waves in the earth’s foreshock , American Geophysical Union, San Francisco, December 1984. 14) Ogino, T., R.J. Walker and M. Ashour

  1. Process evaluation of the method sCOOLsport.

    NARCIS (Netherlands)

    Ooms, L.; Veenhof, C.

    2012-01-01

    Introduction: Childhood obesity has increased rapidly worldwide. Primary schools could play a major role in prevention of childhood obesity. sCOOLsport is a method that primary schools can use to implement health policy and interventions promoting a healthy lifestyle. sCOOLsport focuses on four main

  2. R and D thermochemical I-S process at JAERI

    International Nuclear Information System (INIS)

    Onuki, K.; Kubo, S.; Nakajima, H.; Higashi, S.; Kasahara, S.; Ishiyama, S.; Okuda, H.

    2004-01-01

    The Japan Atomic Energy Research Institute (JAERI) has conducted a study on the thermochemical water-splitting process of the iodine-sulfur family (IS process). In the IS process, water will react with iodine and sulfur dioxide to produce hydrogen iodide and sulfuric acid, which are then decomposed thermally to produce hydrogen and oxygen. High temperature nuclear heat, mainly supplied by a High Temperature Gas-cooled Reactor (HTGR), is used to drive the endothermic decomposition of sulfuric acid. JAERI has demonstrated the feasibility of the water-splitting hydrogen production process by carrying out laboratory-scale experiments in which combined operation of fundamental reactions and separations using the IS process was performed continuously. At present, the hydrogen production test is continuing, using a scaled-up glass apparatus. Corrosion-resistant materials for constructing a large-scale plant and process improvements by introducing advanced separation techniques, such as membrane separation, are under study. Future R and D items are discussed based on the present activities. (author)

  3. Knowledge and process in Whitehead’s philosophy of organism

    Directory of Open Access Journals (Sweden)

    Alfonso Gómez Fernández

    2014-11-01

    Full Text Available The aim of this article is to expound the whiteheadian conception of knowledge as a process. It requires explaining previously the core of his metaphysics, known as the «speculative scheme». All knowledge is essentially a process, not only in a subjective but also in an objective sense, for the British philosopher. Process has to be part of the known object, because sense, relevance and therefore understanding only appear in the process, in creative advance. In accordance with the speculative scheme structure (eternal objects» presupposes a process. The traditional classification of knowledge (sensuous and intellectual ignores the root of all kinds of knowledge: the paradoxical concept of a «non-sensuous perception». This concept emphasizes the «biological» constituent of all act of knowledge, and connects consciousness to reality. Finally I explain the culmination of this gnoseology, known as Reformed Subjectivist Principle. This principle leads to a peculiar realism, far from both Greek and medieval realism and from modern subjectivism likewise.

  4. Environmental review process: The U.S. experience

    International Nuclear Information System (INIS)

    Russo, T.N.

    1993-01-01

    The environmental review process used by the United States Federal Energy Regulatory Commission was discussed. The process has enabled the Commission to assess proposed small hydropower projects, but in the view of the author the Commission has done so at considerable cost and time to developers. Principal reasons for the delays and additional costs were examined, and ways were suggested that developers, agencies, regulators and other stakeholders could facilitate the siting of small hydropower projects without sacrificing the quality of the environmental review process. The highly duplicative nature of the environmental review process for hydropower projects was highlighted. The Commissions's power to regulate hydropower was claimed to have become severely eroded and the Energy Policy Act of 1992 did not significantly improve the process. Conflicts between developers, federal and state agencies, and the Commission over jurisdiction and interpretation of statutes continue to cause siting delays, which could render many projects financially infeasible. A more proactive Federal Energy Regulatory Commission was suggested to work with developers, agencies, Indian tribes and non-government organizations to resolve disputes. 1 tab

  5. A situated approach to student’s reflection processes

    DEFF Research Database (Denmark)

    Wegener, Charlotte

    2011-01-01

    This paper connects with the conference themes “Vocational Education, Labour Markets and Learning”. In Denmark the social and health care education is part of the Vocational Education System, which combines school attendance and trainee service in the social and health care sector. Throughout...... the education, the students are required to reflect upon their own learning processes, and how to combine theoretical knowledge and practical skills. The students are required to document their reflection processes in two formats: 1) log writing and 2) self-evaluation according to a list of endpoint work skills....... The log and the list of work skills play a central role as entry point in the teachers’ and supervisors’ formal learning dialogues with the students. Based upon an ethnographic field study at a social and health care college, and at the workplaces where students work as trainees, I have observed that some...

  6. Parkinson’s disease motor disorganization and temporal processing

    OpenAIRE

    Florio, Tiziana M.

    2017-01-01

    Motor control is essential for everyday life and highly contributes to the development and organisation of higher cognitive functions. Embodied cognition endemically approaches cognitive activities, grounding on sensory-motor processes and the ability to switch from each other in response to specific context and situations. In this view, it is possible to deliberate higher functions such as “expertise” and “decision making” as the ability to reactivate, deconstruct and reconstruct different m...

  7. A situated approach to student’s reflection processes

    OpenAIRE

    Wegener, Charlotte

    2011-01-01

    This paper connects with the conference themes “Vocational Education, LabourMarkets and Learning”. In Denmark the social and health care education is part of the Vocational Education System, which combines school attendance and trainee service in the social and health care sector. Throughout the education, the students are required to reflect upon their own learning processes, and how to combine theoretical knowledge and practical skills. The students are required to document their reflection...

  8. Characterization of 16S rRNA Processing with Pre-30S Subunit Assembly Intermediates from E. coli.

    Science.gov (United States)

    Smith, Brian A; Gupta, Neha; Denny, Kevin; Culver, Gloria M

    2018-06-08

    Ribosomal RNA (rRNA) is a major component of ribosomes and is fundamental to the process of translation. In bacteria, 16S rRNA is a component of the small ribosomal subunit and plays a critical role in mRNA decoding. rRNA maturation entails the removal of intervening spacer sequences contained within the pre-rRNA transcript by nucleolytic enzymes. Enzymatic activities involved in maturation of the 5'-end of 16S rRNA have been identified, but those involved in 3'-end maturation of 16S rRNA are more enigmatic. Here, we investigate molecular details of 16S rRNA maturation using purified in vivo-formed small subunit (SSU) assembly intermediates (pre-SSUs) from wild-type Escherichia coli that contain precursor 16S rRNA (17S rRNA). Upon incubation of pre-SSUs with E. coli S100 cell extracts or purified enzymes implicated in 16S rRNA processing, the 17S rRNA is processed into additional intermediates and mature 16S rRNA. These results illustrate that exonucleases RNase R, RNase II, PNPase, and RNase PH can process the 3'-end of pre-SSUs in vitro. However, the endonuclease YbeY did not exhibit nucleolytic activity with pre-SSUs under these conditions. Furthermore, these data demonstrate that multiple pathways facilitate 16S rRNA maturation with pre-SSUs in vitro, with the dominant pathways entailing complete processing of the 5'-end of 17S rRNA prior to 3'-end maturation or partial processing of the 5'-end with concomitant processing of the 3'-end. These results reveal the multifaceted nature of SSU biogenesis and suggest that E. coli may be able to escape inactivation of any one enzyme by using an existing complementary pathway. Copyright © 2018 Elsevier Ltd. All rights reserved.

  9. S4-3: Spatial Processing of Visual Motion

    Directory of Open Access Journals (Sweden)

    Shin'ya Nishida

    2012-10-01

    Full Text Available Local motion signals are extracted in parallel by a bank of motion detectors, and their spatiotemporal interactions are processed in subsequent stages. In this talk, I will review our recent studies on spatial interactions in visual motion processing. First, we found two types of spatial pooling of local motion signals. Directionally ambiguous 1D local motion signals are pooled across orientation and space for solution of the aperture problem, while 2D local motion signals are pooled for estimation of global vector average (e.g., Amano et al., 2009 Journal of Vision 9(3:4 1–25. Second, when stimulus presentation is brief, coherent motion detection of dynamic random-dot kinematogram is not efficient. Nevertheless, it is significantly improved by transient and synchronous presentation of a stationary surround pattern. This suggests that centre-surround spatial interaction may help rapid perception of motion (Linares et al., submitted. Third, to know how the visual system encodes pairwise relationships between remote motion signals, we measured the temporal rate limit for perceiving the relationship of two motion directions presented at the same time at different spatial locations. Compared with similar tasks with luminance or orientation signals, motion comparison was more rapid and hence efficient. This high performance was affected little by inter-element separation even when it was increased up to 100 deg. These findings indicate the existence of specialized processes to encode long-range relationships between motion signals for quick appreciation of global dynamic scene structure (Maruya et al., in preparation.

  10. Manufacturing Process Selection of Composite Bicycle’s Crank Arm using Analytical Hierarchy Process (AHP)

    Science.gov (United States)

    Luqman, M.; Rosli, M. U.; Khor, C. Y.; Zambree, Shayfull; Jahidi, H.

    2018-03-01

    Crank arm is one of the important parts in a bicycle that is an expensive product due to the high cost of material and production process. This research is aimed to investigate the potential type of manufacturing process to fabricate composite bicycle crank arm and to describe an approach based on analytical hierarchy process (AHP) that assists decision makers or manufacturing engineers in determining the most suitable process to be employed in manufacturing of composite bicycle crank arm at the early stage of the product development process to reduce the production cost. There are four types of processes were considered, namely resin transfer molding (RTM), compression molding (CM), vacuum bag molding and filament winding (FW). The analysis ranks these four types of process for its suitability in the manufacturing of bicycle crank arm based on five main selection factors and 10 sub factors. Determining the right manufacturing process was performed based on AHP process steps. Consistency test was performed to make sure the judgements are consistent during the comparison. The results indicated that the compression molding was the most appropriate manufacturing process because it has the highest value (33.6%) among the other manufacturing processes.

  11. Parallel Attack and the Enemy’s Decision Making Process

    Science.gov (United States)

    1998-04-01

    Theory Coursebook , Vol 2, Sept 1997, p 365 8 Joint Publication 3-0, Doctrine for Joint Operations, 1 Feb 1995, p III-11 9 Gorrell, LtCol Edgar S., “The...Behavioral Strategies,” Journal of the American Statistical Association, Vol 90, Issue 432, December, 1995, p1137 3 Joint Publication 5-0, Doctrine for...Strategies,” Journal of the American Statistical Association, Vol 90, Issue 432, December, 1995, p1137 Allison, Graham T., “Conceptual Models and the Cuban

  12. Peirce’s Scientific and Spiritual Process Metaphysics

    DEFF Research Database (Denmark)

    Brier, Søren

    Peirce saw as his primary task to develop a comprehensive metaphysical and epistemological system in which a new theory of categories, developed after Kant and Hegel, was defined in a completely new way. His triadic category theory was connected to a dynamic triadic web of semiotics viewed...... as the dynamics of objective mind. Peirce’s pragmaticist semiotics attempts to bridge the gap between natural sciences and humanities by combining a phenomenological approach with an evolutionary and realistic understanding of nature and society meaning and logic....

  13. The civilizing process in London’s Old Bailey

    Science.gov (United States)

    Klingenstein, Sara; Hitchcock, Tim; DeDeo, Simon

    2014-01-01

    The jury trial is a critical point where the state and its citizens come together to define the limits of acceptable behavior. Here we present a large-scale quantitative analysis of trial transcripts from the Old Bailey that reveal a major transition in the nature of this defining moment. By coarse-graining the spoken word testimony into synonym sets and dividing the trials based on indictment, we demonstrate the emergence of semantically distinct violent and nonviolent trial genres. We show that although in the late 18th century the semantic content of trials for violent offenses is functionally indistinguishable from that for nonviolent ones, a long-term, secular trend drives the system toward increasingly clear distinctions between violent and nonviolent acts. We separate this process into the shifting patterns that drive it, determine the relative effects of bureaucratic change and broader cultural shifts, and identify the synonym sets most responsible for the eventual genre distinguishability. This work provides a new window onto the cultural and institutional changes that accompany the monopolization of violence by the state, described in qualitative historical analysis as the civilizing process. PMID:24979792

  14. Report on the Fermilab pilot N ampersand S closure process

    International Nuclear Information System (INIS)

    Coulson, L.

    1995-01-01

    This document outlines the plans and protocols for conducting a pilot of the Department of Energy's Necessary ampersand Sufficient Closure Process (Attachment A) at Fermilab National Accelerator Laboratory (FNAL) in Batavia, Illinois. The result of this pilot will be a set of standards which will serve as the agreed upon basis for providing FNAL with adequate Environment, Safety and Health Protection at the lowest possible cost. This pilot will seek out and emulate compatible industry practices which have been proven successful both in terms of safety performance and cost-effectiveness. This charter has been developed as a partnership effort by the parties to this agreement (see ''Responsibilities'' below), and is considered to be a living document

  15. Serbia’s EU integration process: The momentum of 2008

    Directory of Open Access Journals (Sweden)

    Ristić Irena

    2009-01-01

    Full Text Available After four years of ambivalence, the relationship between the European Union and Serbia is again gaining a new opportunity to flourish. The new Serbian government is formed by parties which are strongly committed to Serbia’s EU integration and hence ready to carry out reforms and fully cooperate with the International Crime Tribunal for the former Yugoslavia. This paper presents the current relationship between Brussels and Belgrade and its main obstacles. It emphasizes both internal and external problems of this relationship and their interdependency. In this regard the author argues that only by a mutual commitment of both Serbia and the EU lasting peace will be achieved in the Western Balkans and the region stabilized.

  16. Politics of the U.S. Federal budget process.

    Science.gov (United States)

    Elwood, Thomas W

    U.S. Congress members are influenced in three ways: 1) through the acquisition of money to finance political campaigns; 2) by acquiring enough votes to enable them to be reelected; and 3) obtaining expert information on topics of personal interest. Federal spending patterns have a strong impact on the first two items. The ability to funnel money into a congressional district or state provides an excellent opportunity for a legislator to remain in office. Congress often appears to be highly irrational but individual legislators find it in their rational self-interest to behave in ways that are detrimental to the collective interest of Congress as an institution and to the collective good of society. Every year, leaders of both parties begin a legislative session with the intention of producing both a concurrent budget resolution and a set of spending bills according to schedule. Usually, they fail dismally. This article discusses the reasons why such failures tend to occur regularly.

  17. Integrated HLW Conceptual Process Flowsheet(s) for the Crystalline Silicotitanate Process SRDF-98-04

    International Nuclear Information System (INIS)

    Jacobs, R.A.

    1998-01-01

    The Strategic Research and Development Fund (SRDF) provided funds to develop integrated conceptual flowsheets and material balances for a CST process as a potential replacement for, or second generation to, the ITP process. This task directly supports another SRDF task: Glass Form for HLW Sludge with CST, SRDF-98-01, by M. K. Andrews which seeks to further develop sludge/CST glasses that could be used if the ITP process were replaced by CST ion exchange. The objective of the proposal was to provide flowsheet support for development and evaluation of a High Level Waste Division process to replace ITP. The flowsheets would provide a conceptual integrated material balance showing the impact on the HLW division. The evaluation would incorporate information to be developed by Andrews and Harbour on CST/DWPF glass formulations and provide the bases for evaluating the economic impact of the proposed replacement process. Coincident with this study, the Salt Disposition Team began its evaluation of alternatives for disposition of the HLW salts in the SRS waste tanks. During that time, the CST IX process was selected as one of four alternatives (of eighteen Phase II alternatives) for further evaluation during Phase III

  18. Methodology and findings of the NRC`s materials licensing process redesign

    Energy Technology Data Exchange (ETDEWEB)

    Rathbun, P.A.; Brown, K.D.; Madera, J.R.; Moriarty, M.; Pelchat, J.M.; Usilton, W.K.; Whitten, J.E.; Vacca, P.C.

    1996-04-01

    This report describes the work and vision of the team chartered to redesign the process for licensing users of nuclear materials. The Business Process Redesign team was chartered to improve the speed of the existing licensing process while maintaining or improving public safety and to achieve required resource levels. The report describes the team`s methods for acquiring and analyzing information about the existing materials licensing process and the steps necessary to radically change this process to the envisioned future process.

  19. A note on optimal (s,S) and (R,nQ) policies under a stuttering Poisson demand process

    DEFF Research Database (Denmark)

    Larsen, Christian

    2015-01-01

    In this note, a new efficient algorithm is proposed to find an optimal (s, S) replenishment policy for inventory systems with continuous reviews and where the demand follows a stuttering Poisson process (the compound element is geometrically distributed). We also derive three upper bounds...

  20. Impact and Process Evaluation of the U.S. Department of Energy's Wind Powering America Initiative

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-05-01

    This report presents an evaluation of the impacts and processes of the former Wind Powering America(WPA) initiative sponsored by the U.S. Department of Energy (DOE). WPA has an underlying goal of dramatically increasing the use of wind energy in the U.S.

  1. Sales and operations planning : design and implementation of S&OP process in a multinational company

    OpenAIRE

    Lima, Gonçalo Maria Eva Ferreira Neves

    2013-01-01

    The company under scrutiny in this thesis is Aker Solutions Process Systems. As a part of the Aker Solutions group, Process Systems is a leading global supplier of processing equipment for oil, water and gas, operating worldwide. The company´s operational objective when implementing this process was to optimize the utilization of resources in it´s five different Business Units. The actions undertaken by the company to develop and implement a Sales and Operations Planning proces...

  2. China’s Comprehensive Approach: Refining the U.S. Targeting Process to Inform U.S. Strategy

    Science.gov (United States)

    2018-04-20

    engagement of key PRC leaders with other world leaders and multinational organizations. The bottom-up approach relies upon the vast Chinese population...internal affairs, equality and mutual benefit for all parties, and a peaceful coexistence.33 Much like Chinese leaders that preceded him, Xi Jinping’s... autocratic structure. For example, Xi Jinping’s ability to control the buildup of China’s military capabilities and economic expansions designed to benefit

  3. The s-process in massive stars: the Shell C-burning contribution

    Science.gov (United States)

    Pignatari, Marco; Gallino, R.; Baldovin, C.; Wiescher, M.; Herwig, F.; Heger, A.; Heil, M.; Käppeler, F.

    In massive stars the s¡ process (slow neutron capture process) is activated at different tempera- tures, during He¡ burning and during convective shell C¡ burning. At solar metallicity, the neu- tron capture process in the convective C¡ shell adds a substantial contribution to the s¡ process yields made by the previous core He¡ burning, and the final results carry the signature of both processes. With decreasing metallicity, the contribution of the C¡ burning shell to the weak s¡ process rapidly decreases, because of the effect of the primary neutron poisons. On the other hand, also the s¡ process efficiency in the He core decreases with metallicity.

  4. Turkey’s Role in Somalia’s Peace and Development Process

    Directory of Open Access Journals (Sweden)

    Oktay Bingöl

    2013-12-01

    Full Text Available Somalia, as one of the poorest countries in Africa has been on the top list of the failed states, and tried to meet the challenges such as armed conflicts, poverty and mass migration since 1991. The attempts by the international community to ensure the peace and stability in Somalia have not produced the desired results by 2011. With the famine crisis in the 2011 summer, Turkey has initiated an opening towards Somalia. Turkey’s intervention and aids are soon welcomed by the people of Somalia and the expectations for the provision of the peace and stability have increased. Yet some critiques have arisen about Turkey’s policy toward Somalia. The critiques are focused on Turkey’s work in isolation from the international community, unawareness of Somali’s realities, the lack of institutional capacity and a long term strategy. The historical backdrop, social context and multi dimensional causes of the Somalia crisis indicate that the peace and stability can only be achieved by a long term and comprehensive work coordinated with all actors. In this context, Turkey should review the current Somalia policy and develop a comprehensive strategy

  5. Effects of a new 3-alpha reaction on the s-process in massive stars

    International Nuclear Information System (INIS)

    Kikuch, Yukihiro; Ono, Masaomi; Matsuo, Yasuhide; Hashimoto, Masa-aki; Fujimoto, Shin-ichiro

    2012-01-01

    Effect of a new 3-alpha reaction rate on the s-process during the evolution of a massive star of 25 solar mass is investigated for the first time, because the s-process in massive stars have been believed to be established with only minor change. We find that the s-process with use of the new rate during the core helium burning is very inefficient compared to the case with the previous 3-alpha rate. However, the difference of the overproduction is found to be largely compensated by the subsequent carbon burning. Since the s-process in massive stars has been attributed so far to the neutron irradiation during core helium burning, our finding reveals for the first time the importance of the carbon burning for the s-process during the evolution of massive stars.

  6. TRADE AND FOREIGN DIRECT INVESTMENT MANAGEMENT STRATEGIES FOR U.S. PROCESSED FOOD FIRMS IN CHINA

    OpenAIRE

    Marchant, Mary A.; Saghaian, Sayed H.; Vickner, Steven S.

    1999-01-01

    This research examines the relationship between U.S. foreign direct investment (FDI) and exports of processed foods to China and identifies management strategies to enhance U.S. competitiveness. Two-stage least-squares empirical econometric results from a simultaneous equation system indicate that there exists a strong complementary relationship between U.S exports and FDI into China. Therefore, the appropriate managerial strategy to access Chinese processed foods markets is to increase overa...

  7. RF processing of an S-band high gradient accelerator unit

    International Nuclear Information System (INIS)

    Morita, S.

    1994-01-01

    A 3m-long S-band accelerating structure is used in 1.54 GeV Linac of Accelerator Test Facility. The accelerating structure should be processed up to 200 MW which produce 52 MV/m accelerating gradient. The process of RF processing is described. (author)

  8. Understanding Craftsman’s Creativity in a Framework of Person, Process, Product and Press (4Ps)

    DEFF Research Database (Denmark)

    Zhang, Hui; Zhou, Chunfang; Tanggaard, Lene

    2016-01-01

    , Process, Product, and Press (4Ps) This research question drives to develop a theoretical study bridging two areas of creativity and craftsman’s work. This will further indicate craftsman’s working practice is full of complexity that stimulates creative behavior and that also requires a systematic view...... to understand craftsman’s creativity as involving interaction between 4Ps....

  9. Optical signal processing up to 1.28 Tbits/s

    DEFF Research Database (Denmark)

    Mulvad, Hans Christian Hansen; Oxenløwe, Leif Katsuo; Galili, Michael

    2009-01-01

    Techniques for 640 Gbit/s optical signal processing are described, including demultiplexing, clock recovery, transmission, wavelength conversion, add-drop multiplexing, and timing-jitter tolerance. Demultiplexing at 1.28 Tbit/s is presented, with preliminary results for 1.28 Tbit/s transmission....

  10. H/sub 2/S-removal processes for low-Btu coal gas

    Energy Technology Data Exchange (ETDEWEB)

    Edwards, M. S.

    1979-01-01

    Process descriptions are provided for seven methods of removing H/sub 2/S from a low-Btu coal-derived gas. The processes include MDEA, Benfield, Selexol, Sulfinol, Stretford, MERC Iron Oxide, and Molecular Sieve. Each of these processes was selected as representing a particular category of gas treating (e.g., physical solvent systems). The open literature contains over 50 processes for H/sub 2/S removal, of which 35 were briefly characterized in the literature survey. Using a technical evaluation of these 35 processes, 21 were eliminated as unsuitable for the required application. The remaining 14 processes represent six categories of gas treating. A seventh category, low-temperature solid sorption, was subsequently added. The processes were qualitatively compared within their respective categories to select a representative process in each of the seven categories.

  11. C/S data processing system and its application on DECnet

    International Nuclear Information System (INIS)

    Jin Zhigang; Shu Yantai

    1997-01-01

    Because of the rapid development of PC and LAN, C/S data processing paradigm became the main stream of distributed processing. For the family of VAX which running VMS operating system, in order to implement a C/S system, the authors must solve some problems and take efforts to implement inter-process communication between VAX and PC. The authors introduce how to construct a C/S system in the VAX-PC heterogeneous environment. The authors also describe the practical method by an example of the data processing system for fusion experiment. At last, the result of performance evaluation and comparison of the centralized processing and C/S system confirmed that the latter has some advantages

  12. S-process krypton of variable isotopic composition in the Murchison meteorite

    Science.gov (United States)

    Ott, Urlich; Begemann, Friedrich; Yang, Yongmann; Epstein, Samuel

    1988-01-01

    Data are reported which, for the first time, permit the derivation of the full isotopic spectrum of s-process krypton with reasonable precision. It is shown that this s-Kr in a residue from the Murchison meteorite did not originate in one single s-process but rather is a mixture of contributions from stellar environments where the density of free neutrons was not the same. The astrophysical conditions under which this krypton was produced were distinct from those that have been invoked to explain the solar system s-process abundance. Similar to the C-13-rich carbon component in an aliquot of the same residue, the s-process Kr from different astrophysical sites has retained its identity during the accumulation and subsequent history of the meteorite.

  13. S-process krypton of variable isotopic composition in the Murchison meteorite

    International Nuclear Information System (INIS)

    Ott, U.; Begemann, F.; Yang, J.; Epstein, S.

    1988-01-01

    We report data that allow us to derive with reasonable precision the full isotopic spectrum of s-process krypton. We show that this s-Kr in a residue from Murchison meteorite did not originate in one single s-process but rather is a mixture of contributions from stellar environments where the density of free neutrons was not the same. The astrophysical conditions under which this krypton has been produced were distinct from those that have been invoked to explain the Solar System s-process abundance. Similar to the 13 C-rich carbon component in an aliquot of the same residue, the s-process Kr from different astrophysical sites has retained its identify during the accumulation and subsequent history of the meteorite. (author)

  14. A sensitivity study of s-process: the impact of uncertainties from nuclear reaction rates

    Science.gov (United States)

    Vinyoles, N.; Serenelli, A.

    2016-01-01

    The slow neutron capture process (s-process) is responsible for the production of about half the elements beyond the Fe-peak. The production sites and the conditions under which the different components of s-process occur are relatively well established. A detailed quantitative understanding of s-process nucleosynthesis may yield light in physical processes, e.g. convection and mixing, taking place in the production sites. For this, it is important that the impact of uncertainties in the nuclear physics is well understood. In this work we perform a study of the sensitivity of s-process nucleosynthesis, with particular emphasis in the main component, on the nuclear reaction rates. Our aims are: to quantify the current uncertainties in the production factors of s-process elements originating from nuclear physics and, to identify key nuclear reactions that require more precise experimental determinations. In this work we studied two different production sites in which s-process occurs with very different neutron exposures: 1) a low-mass extremely metal-poor star during the He-core flash (nn reaching up to values of ∼ 1014cm-3); 2) the TP-AGB phase of a M⊙, Z=0.01 model, the typical site of the main s-process component (nn up to 108 — 109cm-3). In the first case, the main variation in the production of s-process elements comes from the neutron poisons and with relative variations around 30%-50%. In the second, the neutron poison are not as important because of the higher metallicity of the star that actually acts as a seed and therefore, the final error of the abundances are much lower around 10%-25%.

  15. An experimental approach to estimate operator’s information processing capacity for diagnosing tasks in NPPs

    International Nuclear Information System (INIS)

    Kim, Ji Tae; Shin, Seung Ki; Kim, Jong Hyun; Seong, Poong Hyun

    2013-01-01

    Highlights: • Main control room operator’s information processing capacity is determined. • The relationship between the information processing capacity and human factors is described. • The information processing capacity results from the subjective and physiological measures are nearly identical. - Abstract: The objectives of this research are: (1) to determine information processing capacity of an operator in a main control room and (2) to describe the relationship between the information processing capacity and human factors. This research centers on the relationship, as experimentally determined, between an operator’s mental workload and information flow during accident diagnosis tasks at nuclear power plants. Based on this relationship, the operator’s information processing capacity is established. In this paper, the information processing capacity is defined as the operator’s ability to manage the amount of bits in a second when diagnosing tasks or accidents. If the operator’s performance decreases rapidly as the information flow rate (bit/s) increases, it is possible to determine the operator’s information processing capacity. The cognitive information of a diagnosis task can be quantified using an information flow model and the operator’s mental workload is measured by subjective and physiological measures. NASA-TLX (Task Load indeX) is selected as the subjective method and an eye tracking system is used as the physiological measure for the workload. In addition, the information processing capacity related to human factors is investigated. Once the information processing capacity of operators is known, then it will be possible to apply it to predict the operators’ performance, design diagnosis tasks, and design human–machine interface

  16. The s-process enrichment of the globular clusters M4 and M22

    Energy Technology Data Exchange (ETDEWEB)

    Shingles, Luke J.; Karakas, Amanda I.; Fishlock, Cherie K.; Yong, David; Da Costa, Gary S.; Marino, Anna F. [Research School of Astronomy and Astrophysics, Australian National University, Canberra, ACT 2611 (Australia); Hirschi, Raphael, E-mail: luke.shingles@anu.edu.au [Institute for the Physics and Mathematics of the Universe (WPI), University of Tokyo, 5-1-5 Kashiwanoha, 277-8583 Kashiwa (Japan)

    2014-11-01

    We investigate the enrichment in elements produced by the slow neutron-capture process (s-process) in the globular clusters M4 (NGC 6121) and M22 (NGC 6656). Stars in M4 have homogeneous abundances of Fe and neutron-capture elements, but the entire cluster is enhanced in s-process elements (Sr, Y, Ba, Pb) relative to other clusters with a similar metallicity. In M22, two stellar groups exhibit different abundances of Fe and s-process elements. By subtracting the mean abundances of s-poor from s-rich stars, we derive s-process residuals or empirical s-process distributions for M4 and M22. We find that the s-process distribution in M22 is more weighted toward the heavy s-peak (Ba, La, Ce) and Pb than M4, which has been enriched mostly with light s-peak elements (Sr, Y, Zr). We construct simple chemical evolution models using yields from massive star models that include rotation, which dramatically increases s-process production at low metallicity. We show that our massive star models with rotation rates of up to 50% of the critical (break-up) velocity and changes to the preferred {sup 17}O(α, γ){sup 21}Ne rate produce insufficient heavy s-elements and Pb to match the empirical distributions. For models that incorporate asymptotic giant branch yields, we find that intermediate-mass yields (with a {sup 22}Ne neutron source) alone do not reproduce the light-to-heavy s-element ratios for M4 and M22, and that a small contribution from models with a {sup 13}C pocket is required. With our assumption that {sup 13}C pockets form for initial masses below a transition range between 3.0 and 3.5 M {sub ☉}, we match the light-to-heavy s-element ratio in the s-process residual of M22 and predict a minimum enrichment timescale of between 240 and 360 Myr. Our predicted value is consistent with the 300 Myr upper limit age difference between the two groups derived from isochrone fitting.

  17. (n,{gamma}) and (p,{gamma}) rates for s- and p-process nucleosynthesis

    Energy Technology Data Exchange (ETDEWEB)

    Kaeppeler, F [Forschungszentrum Karlsruhe, Karlsruhe (Germany)

    1998-06-01

    The late stages of stellar evolution are characterized by a series of nucleosynthesis events. With respect to the heavy elements, these are the s process associated with the helium burning layers in Red Giant stars as well as the r and p processes which occur in supernova explosions. In contrast to the explosive scenarios, the nuclear physics data for s-process studies can be determined in laboratory experiments as illustrated at few recent examples. The application of these techniques to measurements of relevance for the p process are also discussed. (orig.)

  18. (n,γ) and (p,γ) rates for s- and p-process nucleosynthesis

    International Nuclear Information System (INIS)

    Kaeppeler, F.

    1998-01-01

    The late stages of stellar evolution are characterized by a series of nucleosynthesis events. With respect to the heavy elements, these are the s process associated with the helium burning layers in Red Giant stars as well as the r and p processes which occur in supernova explosions. In contrast to the explosive scenarios, the nuclear physics data for s-process studies can be determined in laboratory experiments as illustrated at few recent examples. The application of these techniques to measurements of relevance for the p process are also discussed. (orig.)

  19. Nuclear criticality safety analysis summary report: The S-area defense waste processing facility

    International Nuclear Information System (INIS)

    Ha, B.C.

    1994-01-01

    The S-Area Defense Waste Processing Facility (DWPF) can process all of the high level radioactive wastes currently stored at the Savannah River Site with negligible risk of nuclear criticality. The characteristics which make the DWPF critically safe are: (1) abundance of neutron absorbers in the waste feeds; (2) and low concentration of fissionable material. This report documents the criticality safety arguments for the S-Area DWPF process as required by DOE orders to characterize and to justify the low potential for criticality. It documents that the nature of the waste feeds and the nature of the DWPF process chemistry preclude criticality

  20. R- and s-process nuclei in the early history of the galaxy: HD 122563

    International Nuclear Information System (INIS)

    Sneden, C.; Parthasarathy, M.

    1983-01-01

    New high-resolution, high signal-to-noise spectra in the blue and ultraviolet spectral regions have been obtained for the extremely metal-poor giant star HD 122563. A complete model atmosphere, spectrum synthesis analysis of this star has been performed, employing a large number of weak iron-peak species lines and laboratory oscillator strengths. Spectral features of many rare earth elements have been detected in the ultraviolet. The large overdeficiency of nearly a factor of 10 for the s-process element barium is confirmed and is shown to extend to the other s-process elements La, Ce, Pr, Nd, and Sm. The r-process elements Eu, Gd, Dy, and possibly Er and Yb are less deficient than the s-process elements but do exhibit lower ratios with respect to iron-peak elements than in the Sun. A supplementary differential analysis of HD 122563 with respect to the Sun shows that the heavy-element abundances are not very model-atmosphere dependent. The heavy-element abundances can be understood with nucleosynthesis models in which the progenitors of this star produce mainly r-process isotopes. A small contribution of the s-process to the creation of the elements Sr, Y, Zr, and possibly Ba is not ruled out, but such traditional s-process elements as La, Pr, and Nd appear to have been made in the r-process in stellar generations prior to the formation of HD 122563

  1. Energy-Intensive Processes Portfolio: Addressing Key Energy Challenges Across U.S. Industry

    Energy Technology Data Exchange (ETDEWEB)

    None

    2011-03-07

    AMO is developing advanced technologies that cut energy use and carbon emissions in some of the most energy-intensive processes within U.S. manufacturing. The brochure describes the AMO R&D projects that address these challenges.

  2. Adapting Nielsen’s Design Heuristics to Dual Processing for Clinical Decision Support

    Science.gov (United States)

    Taft, Teresa; Staes, Catherine; Slager, Stacey; Weir, Charlene

    2016-01-01

    The study objective was to improve the applicability of Nielson’s standard design heuristics for evaluating electronic health record (EHR) alerts and linked ordering support by integrating them with Dual Process theory. Through initial heuristic evaluation and a user study of 7 physicians, usability problems were identified. Through independent mapping of specific usability criteria to support for each of the Dual Cognitive processes (S1 and S2) and deliberation, agreement was reached on mapping criteria. Finally, usability errors from the heuristic and user study were mapped to S1 and S2. Adding a dual process perspective to specific heuristic analysis increases the applicability and relevance of computerized health information design evaluations. This mapping enables designers to measure that their systems are tailored to support attention allocation. System 1 will be supported by improving pattern recognition and saliency, and system 2 through efficiency and control of information access. PMID:28269915

  3. Uncertainties in s-process nucleosynthesis in massive stars determined by Monte Carlo variations

    Science.gov (United States)

    Nishimura, N.; Hirschi, R.; Rauscher, T.; St. J. Murphy, A.; Cescutti, G.

    2017-08-01

    The s-process in massive stars produces the weak component of the s-process (nuclei up to A ˜ 90), in amounts that match solar abundances. For heavier isotopes, such as barium, production through neutron capture is significantly enhanced in very metal-poor stars with fast rotation. However, detailed theoretical predictions for the resulting final s-process abundances have important uncertainties caused both by the underlying uncertainties in the nuclear physics (principally neutron-capture reaction and β-decay rates) as well as by the stellar evolution modelling. In this work, we investigated the impact of nuclear-physics uncertainties relevant to the s-process in massive stars. Using a Monte Carlo based approach, we performed extensive nuclear reaction network calculations that include newly evaluated upper and lower limits for the individual temperature-dependent reaction rates. We found that most of the uncertainty in the final abundances is caused by uncertainties in the neutron-capture rates, while β-decay rate uncertainties affect only a few nuclei near s-process branchings. The s-process in rotating metal-poor stars shows quantitatively different uncertainties and key reactions, although the qualitative characteristics are similar. We confirmed that our results do not significantly change at different metallicities for fast rotating massive stars in the very low metallicity regime. We highlight which of the identified key reactions are realistic candidates for improved measurement by future experiments.

  4. Antigenicity of Anisakis simplex s.s. L3 in parasitized fish after heating conditions used in the canning processing.

    Science.gov (United States)

    Tejada, Margarita; Olivares, Fabiola; de las Heras, Cristina; Careche, Mercedes; Solas, María Teresa; García, María Luisa; Fernandez, Agustín; Mendizábal, Angel; Navas, Alfonso; Rodríguez-Mahillo, Ana Isabel; González-Muñoz, Miguel

    2015-03-30

    Some technological and food processing treatments applied to parasitized fish kill the Anisakis larvae and prevent infection and sensitization of consumers. However, residual allergenic activity of parasite allergens has been shown. The aim here was to study the effect of different heat treatments used in the fish canning processing industry on the antigen recognition of Anisakis L3. Bigeye tuna (Thunnus obesus) and yellowfin tuna (Thunnus albacares) were experimentally infected with live L3 Anisakis. After 48 h at 5 ± 1 °C, brine was added to the muscle, which was then canned raw (live larvae) or heated (90 °C, 30 min) (dead larvae) and treated at 113 °C for 60 min or at 115 °C for 90 min. Anisakis antigens and Ani s 4 were detected with anti-crude extract and anti-Ani s 4 antisera respectively. Ani s 4 decreased in all lots, but the muscle retained part of the allergenicity irrespective of the canning method, as observed by immunohistochemistry. Dot blot analysis showed a high loss of Ani s 4 recognition after canning, but residual antigenicity was present. The results indicate that heat treatment for sterilization under the conditions studied produces a decrease in Ani s 4 and suggest a potential exposure risk for Anisakis-sensitized patients. © 2014 Society of Chemical Industry.

  5. Can Rural Employment Benefit from Changing Labor Skills in U.S. Processed Food Trade?

    Science.gov (United States)

    Schluter, Gerald; Lee, Chinkook

    2002-01-01

    The 1990s saw a gain in rural food-processing employment, particularly meat packing and poultry processing, as the industry's demand for low-skilled workers increased. Analysis links the change in worker skills to international trade. While increased rural employment may seem beneficial, the jobs often do not appeal to rural domestic workers, and…

  6. Stacker’s Crane Position Fixing Based on Real Time Image Processing and Analysis

    Directory of Open Access Journals (Sweden)

    Kmeid Saad

    2015-06-01

    Full Text Available This study illustrates the usage of stacker cranes and image processing in automated warehouse systems. The aim is to use real time image processing and analysis for a stacker’s crane position fixing in order to use it as a pick-up and delivery system (P/D, to be controlled by a programmable logic controller unit (PLC.

  7. Foam generation during G.S. [Girdler sulphide] process and its prevention

    International Nuclear Information System (INIS)

    Lammirato, Alberto; Rojo, Enrique.

    1989-01-01

    Available literature, from both foreign and local sources, regarding foam generation during Girdler Sulphide (G.S.) process operation, was compiled. Assembly and operation of a loop for hydraulic process conditions simulation, of which further tests are to be expected, is reported. (Author) [es

  8. Small enterprises' importance to the U.S. secondary wood processing industry

    Science.gov (United States)

    Urs Buehlmann; Omar Espinoza; Matthew Bumgardner; Michael. Sperber

    2013-01-01

    The past decades have seen numerous U.S. secondary wood processing companies shift their production to overseas locations, mainly in Southeast Asia. The remaining companies have been hit hard by the downturn in housing markets and the following recession. Thus, many large customers of the U.S. hardwood lumber industry have reduced or stopped the purchase of products,...

  9. On the (R,s,Q) Inventory Model when Demand is Modelled as a Compound Process

    NARCIS (Netherlands)

    Janssen, F.B.S.L.P.; Heuts, R.M.J.; de Kok, T.

    1996-01-01

    In this paper we present an approximation method to compute the reorder point s in a (R; s; Q) inventory model with a service level restriction, where demand is modelled as a compound Bernoulli process, that is, with a xed probability there is positive demand during a time unit, otherwise demand is

  10. A Systematic Process for Developing High Quality SaaS Cloud Services

    Science.gov (United States)

    La, Hyun Jung; Kim, Soo Dong

    Software-as-a-Service (SaaS) is a type of cloud service which provides software functionality through Internet. Its benefits are well received in academia and industry. To fully utilize the benefits, there should be effective methodologies to support the development of SaaS services which provide high reusability and applicability. Conventional approaches such as object-oriented methods do not effectively support SaaS-specific engineering activities such as modeling common features, variability, and designing quality services. In this paper, we present a systematic process for developing high quality SaaS and highlight the essentiality of commonality and variability (C&V) modeling to maximize the reusability. We first define criteria for designing the process model and provide a theoretical foundation for SaaS; its meta-model and C&V model. We clarify the notion of commonality and variability in SaaS, and propose a SaaS development process which is accompanied with engineering instructions. Using the proposed process, SaaS services with high quality can be effectively developed.

  11. Charge Carrier Trapping Processes in RE2O2S (RE = La, Gd, Y, and Lu)

    NARCIS (Netherlands)

    Luo, H.; Bos, A.J.J.; Dorenbos, P.

    2017-01-01

    Two different charge carrier trapping processes have been investigated in RE2O2S:Ln3+ (RE = La, Gd, Y, and Lu; Ln = Ce, Pr, and Tb) and RE2O2S:M (M = Ti4+ and Eu3+). Cerium, praseodymium and terbium act as recombination centers and hole trapping centers while host intrinsic defects provide the

  12. All-Optical Signal Processing for 640 Gbit/s Applications

    DEFF Research Database (Denmark)

    Mulvad, Hans Christian Hansen

    2008-01-01

    This thesis concerns all-optical signal processing technologies for ultra-high serial data rates up to 640 Gbit/s. Firstly, time-division add-drop multiplexing at 640 Gbit/s is demonstrated for the first time using two different fibre-based switching techniques. Secondly, a novel principle for po...

  13. Does Joshua Greene’s Dual Process Theory of Moral Judgment Commit the Naturalistic Fallacy?

    OpenAIRE

    Javier Gracia Calandín

    2017-01-01

    In this article I analyse whether Joshua Greene’s dual process theory of moral judgment commits the naturalistic fallacy. Firstly, and against current authors such as Patricia S. Churchland, I uphold the validity of the naturalistic fallacy denounced by Moore for more than a century. Secondly, I highlight and question Greene’s naturalized way of understanding Deontologism. Thirdly, I assert the distinction between "neural basis" and "moral foundation" as the key to avoid committing the natura...

  14. Recovery process of the mineral sphalerite of Chaabet El Hamra’s deposit (Algeria

    Directory of Open Access Journals (Sweden)

    Djeghlal M.

    2012-06-01

    Full Text Available The present study rests on the treatment’s process optimization by flotation of the Chaabet El Hamra’s zinc ore (Algeria, for the optimization parameters relating to the production. The choice of parameter to optimize for flotation, and the arrangements and the scheme’s initial flotation, while considering the studies already undertaken, all this has enabled us to better focus our work, while minimizing the consumption of reagents in different tests, This has resulted in successful outcomes.

  15. MANAGEMENT OF A COMPANY’S ECONOMIC SUSTAINABILITY IN THE PROCESS OF INNOVATIVE PROJECTS IMPLEMENTATION

    Directory of Open Access Journals (Sweden)

    Juliana M. Sulejmanova

    2013-01-01

    Full Text Available The article is devoted to management of a company’s sustainability in the process of innovative projects implementation. The author suggests using dynamic index named aggregated index of a company’s economic stability. Criteria of choosing innovative projects to be implemented are worked out. These criteria add traditional estimation and take into account changing company’s economic stability at every stage of project lifecycle.

  16. Shell-model calculations of beta-decay rates for s- and r-process nucleosyntheses

    International Nuclear Information System (INIS)

    Takahashi, K.; Mathews, G.J.; Bloom, S.D.

    1985-01-01

    Examples of large-basis shell-model calculations of Gamow-Teller β-decay properties of specific interest in the astrophysical s- and r- processes are presented. Numerical results are given for: (1) the GT-matrix elements for the excited state decays of the unstable s-process nucleus 99 Tc; and (2) the GT-strength function for the neutron-rich nucleus 130 Cd, which lies on the r-process path. The results are discussed in conjunction with the astrophysics problems. 23 refs., 3 figs

  17. System and process for capture of H.sub.2S from gaseous process streams and process for regeneration of the capture agent

    Science.gov (United States)

    Heldenbrant, David J; Koech, Phillip K; Rainbolt, James E; Bearden, Mark D; Zheng, Feng

    2014-02-18

    A system and process are disclosed for selective removal and recovery of H.sub.2S from a gaseous volume, e.g., from natural gas. Anhydrous organic, sorbents chemically capture H.sub.2S gas to form hydrosulfide salts. Regeneration of the capture solvent involves addition of an anti-solvent that releases the captured H.sub.2S gas from the capture sorbent. The capture sorbent and anti-solvent are reactivated for reuse, e.g., by simple distillation.

  18. Broca’s area processes the hierarchical organization of observed action

    Directory of Open Access Journals (Sweden)

    Masumi eWakita

    2014-01-01

    Full Text Available Broca’s area has been suggested as the area responsible for the domain-general hierarchical processing of language and music. Although meaningful action shares a common hierarchical structure with language and music, the role of Broca’s area in this domain remains controversial. To address the involvement of Broca’s area in the processing action hierarchy, the activation of Broca’s area was measured using near-infrared spectroscopy. Measurements were taken while participants watched silent movies that featured hand movements playing familiar and unfamiliar melodies. The unfamiliar melodies were reversed versions of the familiar melodies. Additionally, to investigate the effect of a motor experience on the activation of Broca’s area, the participants were divided into well-trained and less-trained groups. The results showed that Broca’s area in the well-trained participants demonstrated a significantly larger activation in response to the hand motion when an unfamiliar melody was played than when a familiar melody was played. However, Broca’s area in the less-trained participants did not show a contrast between conditions despite identical abilities of the two participant groups to identify the melodies by watching key pressing actions. These results are consistent with previous findings that Broca’s area exhibits increased activation in response to grammatically violated sentences and musically deviated chord progressions as well as the finding that this region does not represent the processing of grammatical structure in less-proficient foreign language speakers. Thus, the current study suggests that Broca’s area represents action hierarchy and that sufficiently long motor training is necessary for it to become sensitive to motor syntax. Therefore, the notion that hierarchical processing in Broca’s area is a common function shared between language and music may help to explain the role of Broca’s area in action perception.

  19. The importance of $^{22}$Ne($\\alpha$, n)$^{25}$Mg as s-process neutron source and the s-process thermometer $^{151}$Sm

    CERN Multimedia

    Leal, L C; Kitis, G; Guber, K H; Cox, J; Quaranta, A; Koehler, P E

    2002-01-01

    Neutron capture nucleosynthesis provides a sensitive tool for testing He burning scenarios in massive stars as well as in low mass AGB stars. During this phase of stellar evolution nuclei in the mass region between Fe and Bi are producted by the slow neutron capture process ($\\emph{s}$-process). Because of the relatively low neutron densities, neutron capture times are long compared to typical $\\beta$-half-lives. This implies that the reaction path follows the stability valley and that the resulting abundances are essentially determined by the respective neutron capture cross sections. Hence, these data represent the most important nuclear physics input for $\\emph{s}$-process studies. In general, laboratory measurements are required in the energy range 0.1 < E$_{n}$ < 300 keV in order to obtain reliable averages over the stellar Maxwell-Boltzmann distribution for thermal energies between kT=5 keV and 30 keV. The extremely high neutron flux, the energy resolution and the excellent duty factor make the nT...

  20. CuGaS2 and CuGaS2–ZnS Porous Layers from Solution-Processed Nanocrystals

    Science.gov (United States)

    Guardia, Pablo; Estradé, Sònia; Peiró, Francesca; Cabot, Andreu

    2018-01-01

    The manufacturing of semiconducting films using solution-based approaches is considered a low cost alternative to vacuum-based thin film deposition strategies. An additional advantage of solution processing methods is the possibility to control the layer nano/microstructure. Here, we detail the production of mesoporous CuGaS2 (CGS) and ZnS layers from spin-coating and subsequent cross-linking through chalcogen-chalcogen bonds of properly functionalized nanocrystals (NCs). We further produce NC-based porous CGS/ZnS bilayers and NC-based CGS–ZnS composite layers using the same strategy. Photoelectrochemical measurements are used to demonstrate the efficacy of porous layers, and particularly the CGS/ZnS bilayers, for improved current densities and photoresponses relative to denser films deposited from as-produced NCs. PMID:29621198

  1. CuGaS2 and CuGaS2–ZnS Porous Layers from Solution-Processed Nanocrystals

    Directory of Open Access Journals (Sweden)

    Taisiia Berestok

    2018-04-01

    Full Text Available The manufacturing of semiconducting films using solution-based approaches is considered a low cost alternative to vacuum-based thin film deposition strategies. An additional advantage of solution processing methods is the possibility to control the layer nano/microstructure. Here, we detail the production of mesoporous CuGaS2 (CGS and ZnS layers from spin-coating and subsequent cross-linking through chalcogen-chalcogen bonds of properly functionalized nanocrystals (NCs. We further produce NC-based porous CGS/ZnS bilayers and NC-based CGS–ZnS composite layers using the same strategy. Photoelectrochemical measurements are used to demonstrate the efficacy of porous layers, and particularly the CGS/ZnS bilayers, for improved current densities and photoresponses relative to denser films deposited from as-produced NCs.

  2. PECULIARITIES OF THE NURSING PROCESS IN INFANTS WITH DOWN’S SYNDROME

    Directory of Open Access Journals (Sweden)

    N. B. Merzlova

    2012-01-01

    Full Text Available Nursing process arrangement for infants with Down’s syndrome requires nonroutine solutions when nurse’s professional capacity criterion is her psychological and pedagogical preparation, personality traits favoring the real communication with children and parents, vision of the future and a desire to find a way out of the impasse. Nursing process for infants with Down’s syndrome is put into effect in an extreme stress situation with a time limit on making a decision about whether to take a child in a family or to give it up, while it is also important that the nursing process as a method of consequent systematic professional nursing in corpore. A description of all stages of the nursing process for infants with Down’s syndrome is given, a map of each nursing process stage is made, a typology of psychological adaptation of mothers having given birth to children with perinatal pathology is given, recommendations on psychological aid for mothers of the infants with Down’s syndrome on the basis of the 4 aforementioned types of adaptation to an existing situation are structured.

  3. Stellar neutron capture rates – key data for the s process

    Directory of Open Access Journals (Sweden)

    Käppeler F.

    2013-12-01

    Full Text Available Neutron reactions are responsible for the formation of the elements heavier than iron. The corresponding scenarios relate to the He- and C- burning phases of stellar evolution (s process and to supernova explosions (r and p processes. The s process, which is characterized by low neutron densities, operates in or near the valley of β stability and has produced about half of the elemental abundances between Fe and Bi in the solar system and in the Universe. Because the s abundances are essentially determined by the (n, γ cross sections along the reaction path, accurate neutron data constitute the key input for s process studies. Important constraints for the physical conditions at the stellar sites can be inferred by comparison of the abundance patterns from current s-process models with solar system material or presolar grains. The experimental methods for the determination of stellar (n, γ rates are outlined at the example of recent cross section measurements and remaining quests will be discussed with respect to existing laboratory neutron sources and new developments.

  4. Does Joshua Greene’s Dual Process Theory of Moral Judgment Commit the Naturalistic Fallacy?

    Directory of Open Access Journals (Sweden)

    Javier Gracia Calandín

    2017-02-01

    Full Text Available In this article I analyse whether Joshua Greene’s dual process theory of moral judgment commits the naturalistic fallacy. Firstly, and against current authors such as Patricia S. Churchland, I uphold the validity of the naturalistic fallacy denounced by Moore for more than a century. Secondly, I highlight and question Greene’s naturalized way of understanding Deontologism. Thirdly, I assert the distinction between "neural basis" and "moral foundation" as the key to avoid committing the naturalistic fallacy. Finally and according to that key distinction I assess Greene’s neuroethical approach and I analyse some of its most critical aspects related to normative issues.

  5. EVELOPMENT OF EDUCATIONAL SPECIALIST’S CREATIVITY IN THE PROCESS OF CONFLICT RESOLUTION

    Directory of Open Access Journals (Sweden)

    Darya N. Sergeeva

    2016-01-01

    Full Text Available The aim of the article is to present creativity in the process of pedagogical conflict resolution. The results of psychological research conducted among secondary school teachers are given. The article summarizes the results of the study of personality and creativity highlighted its main components. Methods. The methods involve theoretical analysis of the problem and the subject of investigation, philosophical, psychological, pedagogical, sociological literature research; empirical methods (school teacher’s psychological testing by means of hand-picked procedures; methods stimulating educational specialists to take initiative in the process of conflict situations› constructive resolution (training methods group discussion, role-playing and business games, specific situations analysis; quantitative and qualitative analysis of empirical results (computer data processing, data design in the form of tables, schemes, illustrations, diagrams, bar charts, methods of mathematical statistics (The Spearman's Rank Correlation Coefficient, φ-Fisher. Data processing procedure is actualized by means of MS Excel package and statistical manipulation program «Statistica 8.0». Results and scientific novelty. The scientific belief of the following concepts content is concretized: «educational specialist’s creativity in the process of conflict resolution», «pedagogical conflict»; psycho-pedagogical conditions of creativity development in the process of conflict resolution are determined. Personal and behavioral features of various creativity level pedagogues are elicited. The correlation of educational specialist’s creativity with peculiarities of their behavior in conflict situations is revealed. It is stated that creativity appears to be one of the determinant of individual’s action, which is oriented on constructive conflict resolution. The program schemed by us promoted the extension of the teachers creative potential, which, in return

  6. Upside to downsizing : Acceleware's graphic processor technology propels seismic data processing revolution

    Energy Technology Data Exchange (ETDEWEB)

    Smith, M.

    2009-11-15

    Accelware has developed a graphic processor technology (GPU) that is transforming the petroleum industry. The benefits of the technology are its small-footprint, low-wattage, and high speed. The software brings supercomputing speed to the desktop by leveraging the massive parallel processing capacity to the very latest in GPU technology. This article discussed the GPU technology and its emergence as a powerful supercomputing tool. Accelware's partnering with California-based NVIDIA was also outlined. The advantages of the technology were also discussed including its smaller footprint. Accelware's hardware takes up a fraction of the space and uses up to 70 per cent less power than a traditional central processing unit. By combining Accelware's core knowledge in making complex algorithms run in parallel with an in-house team of seismic industry experts, the company provides software solutions for seismic data processors that access the massively parallel processing capabilities of GPUs. 1 fig.

  7. Significance of librarian’s self-concept in the communication process

    Directory of Open Access Journals (Sweden)

    Darja Kobal-Grum

    2004-01-01

    Full Text Available The article deals with the significance of the librarian’s self-concept in the communication process. First, it underlines the meaning of reference interviews, and second, it focuses on other micro and macro aspects of communication. The analysis shows that the librarian’s self-concept is hierarchically organised, structured, and therefore it consists of different areas. Each area equally contributes to the development and preservation of the appropriate librarian’s self-concept; although some areas have more direct influence than others. To attain a high self-concept, it is of fundamental importance, that the librarian develops all self-concept areas, from individual ones to social ones. It was found that a structured and positive specialist’s self-concept is highly significant for the contribution of effective reference interviews, and finally, the article offers some directions for a successful development of the communication process.

  8. CMOS-compatible batch processing of monolayer MoS2 MOSFETs

    Science.gov (United States)

    Xiong, Kuanchen; Kim, Hyun; Marstell, Roderick J.; Göritz, Alexander; Wipf, Christian; Li, Lei; Park, Ji-Hoon; Luo, Xi; Wietstruck, Matthias; Madjar, Asher; Strandwitz, Nicholas C.; Kaynak, Mehmet; Lee, Young Hee; Hwang, James C. M.

    2018-04-01

    Thousands of high-performance 2D metal-oxide-semiconductor field effect transistors (MOSFETs) were fabricated on wafer-scale chemical vapor deposited MoS2 with fully-CMOS-compatible processes such as photolithography and aluminum metallurgy. The yield was greater than 50% in terms of effective gate control with less-than-10 V threshold voltage, even for MOSFETs having deep-submicron gate length. The large number of fabricated MOSFETs allowed statistics to be gathered and the main yield limiter to be attributed to the weak adhesion between the transferred MoS2 and the substrate. With cut-off frequencies approaching the gigahertz range, the performances of the MOSFETs were comparable to that of state-of-the-art MoS2 MOSFETs, whether the MoS2 was grown by a thin-film process or exfoliated from a bulk crystal.

  9. Radiative recombination process of high density excitons in CdS crystals

    Energy Technology Data Exchange (ETDEWEB)

    Dneprovskij, V.S.; Klimov, V.I.; Martynenko, E.D.; Stadnik, V.A.

    1983-11-01

    The behaviour of the P-, E-, L- and Q-lines of luminescence in CdS is compared with calculated results for the processes of exciton-exciton scattering, exciton-electron scattering, annihilation of equilibrium electron-hole fluid (EHF), annihilation of electron-hole plasma (processes of amplification and reabsorption are taken into account). The comparison permitted to determine parameters of high density exciton gas and EHF. Spectral-kinetic properties of generation are investigated, and amplification factor in CdS is estimated.

  10. Economic Analysis for Nuclear Hydrogen Production System Based on HyS Process

    International Nuclear Information System (INIS)

    Yang, Kyeong Jin; Lee, Ki Young; Lee, Tae Hoon; Chang, Jong Hwa

    2009-01-01

    The current promising base for massive hydrogen production on high temperature environment derives primarily from three sources: the commercial production of chemicals for the sulfur-iodine (SI) process, the development of solid-oxide fuel cells (SOFC), and the hybrid method of chemicals and fuel cells. The three kinds of process requires high temperature heat energy over 850∼950 .deg. C for the efficient and economic hydrogen production. One of the clean, economic, and moreover promising heat sources supplied to the process is nuclear plants. The nuclear plants producing high temperature heat energy over 950 .deg. C are well known as Very High Temperature Reactors (VHTR) which could have two types of prismatic and pebble-bed cores along reactor core shape. In this paper, we report on the Hybrid Sulfur Process (HyS), and the estimated costs for the system which composes of VHTR of prismatic core type and HyS plant. Nuclear hydrogen production system based on HyS process has been configured to optimally use the thermal energy from VHTR and electric energy to produce hydrogen and oxygen from clean water. High temperature thermal energy is transferred to the HyS process by way of intermediate heat exchanger (IHX) with associated piping. In this paper, the hydrogen production costs for a system composed of a VHTR with six 600MWth module, a power conversion unit (PCU) and a HyS plant are presented, where the thermal energy produced in two module was converted to electric energy in PCU and then transferred to the electrolysis cells for hydrogen production and circulating units on HyS plant, and the remaining thermal energy was supplied to chemical process on HyS plants. As a preliminary study of cost estimates for nuclear hydrogen systems, the hydrogen production costs of the nuclear energy sources benchmarking GT-MHR are estimated in the necessary input data on a Korean specific basis. G4- ECONS was appropriately modified to calculate the cost for hydrogen production

  11. Effects of s-process branchings on stellar and meteoritic abundances

    International Nuclear Information System (INIS)

    Norman, E.B.; Lesko, K.T.; Crane, S.G.; Larimer, R.M.; Champagne, A.E.

    1985-12-01

    The level scheme and electromagnetic properties of 148 Pm have been studied using 149 Sm(d, 3 He) and 148 Nd(p,nγ) reactions. Combining these measurements with estimates for E2/M1 decay branching ratios leads to the tentative conclusion that 148 Pm/sup g,m/ are in thermal equilibrium during the s-process. The branch at 148 Pm then leads to an inferred s-process neutron density of 3 x 10 8 cm -3

  12. Secondary processes in gaseous boron accompanying the cascade decay of the 1s-vacancy

    International Nuclear Information System (INIS)

    Bruehl, S.; Kochur, A.G.

    2009-01-01

    We employ the Monte-Carlo technique to simulate the processes in gaseous boron initiated by 1s-photoionization of boron atoms. The processes of excitations/ionizations of atoms by photons and electrons emitted by the neighboring decaying atoms are considered. It is found that the medium effect becomes noticeable at atomic densities of about 2.5·10 20 m -3 . (authors)

  13. PATENTS, R&D, AND MARKET STRUCTURE IN THE U.S. FOOD PROCESSING INDUSTRY

    OpenAIRE

    Gopinath, Munisamy; Vasavada, Utpal

    1999-01-01

    This study investigates the effects of market structure and research and development (R&D) on the innovation activities of firms. Fixed and random effects count data models are estimated with firm-level data for the U.S. food processing industry. Results show a positive association between patents and R&D, and patents and market structure, suggesting that firms which exhibit noncompetitive behavior are likely to develop new products and processes. Significant intra-industry spillovers of know...

  14. Solution-processed In2S3 buffer layer for chalcopyrite thin film solar cells

    OpenAIRE

    Wang Lan; Lin Xianzhong; Ennaoui Ahmed; Wolf Christian; Lux-Steiner Martha Ch.; Klenk Reiner

    2016-01-01

    We report a route to deposit In2S3 thin films from air-stable, low-cost molecular precursor inks for Cd-free buffer layers in chalcopyrite-based thin film solar cells. Different precursor compositions and processing conditions were studied to define a reproducible and robust process. By adjusting the ink properties, this method can be applied in different printing and coating techniques. Here we report on two techniques, namely spin-coating ...

  15. Process kinetics and digestion efficiency of anaerobic batch fermentation of brewer`s spent grains (BSG)

    Energy Technology Data Exchange (ETDEWEB)

    Ezeonu, F.C.; Okaka, A.N.C. [Nnamdi Azikiwe University, Awka (Nigeria). Dept. of Applied Biochemistry

    1996-12-31

    The process kinetics of optimized anaerobic batch digestion of brewer`s spent grains (BSG) reveal that biomethanation is essentially a first order reaction interrupted intermittently by mixed order reactions. An apparent cellulose degradation efficiency of approximately 60% and a lignin degradation efficiency of about 40% was observed in the optimized process. Using the Ken and Hashimoto model, the operational efficiency of the digester was determined to be 26%. (author)

  16. Training processes in under 6s football competition: The transition from ingenuity to institutionalization

    OpenAIRE

    Abel Merino Orozco; Ana Arraiz Pérez; Fernando Sabirón Sierra

    2016-01-01

    Under 6s football competition is a school sport that has inherent educational implications. Moreover, it is a booming non-formal socio-educational framework where families and children lay training expectations and dreams. The aim is to comprehend the emerging learning processes promoted in this environment for 6 years-old children, when the child starts the institutionalization process in the ruled sport. The research uses a case study design, the ethnographic mode, through participant obser...

  17. Improving the Services at the Outlets of McDonald’s Malaysia through Process Innovation

    OpenAIRE

    Chummar George, Pudussery

    2014-01-01

    In 2010, the food processing industry contributed about 10% of the Malaysian manufacturing output attracted a total of RM1.972 billion in 69 projects. Employment in the processed food and beverages industry decreased in 2009 by 5.1% to 43,080 compared with 45,418 in 2008. Small and medium sized enterprises represent more than 80% of the total number of establishments in the processed food segment. In Malaysia, McDonald’s is leading the food franchisor at second place to KFC, and is planning o...

  18. Software Graphics Processing Unit (sGPU) for Deep Space Applications

    Science.gov (United States)

    McCabe, Mary; Salazar, George; Steele, Glen

    2015-01-01

    A graphics processing capability will be required for deep space missions and must include a range of applications, from safety-critical vehicle health status to telemedicine for crew health. However, preliminary radiation testing of commercial graphics processing cards suggest they cannot operate in the deep space radiation environment. Investigation into an Software Graphics Processing Unit (sGPU)comprised of commercial-equivalent radiation hardened/tolerant single board computers, field programmable gate arrays, and safety-critical display software shows promising results. Preliminary performance of approximately 30 frames per second (FPS) has been achieved. Use of multi-core processors may provide a significant increase in performance.

  19. Investigation of the s-process branch-point nucleus {sup 86}Rb at HIγS

    Energy Technology Data Exchange (ETDEWEB)

    Erbacher, Philipp; Glorius, Jan; Reifarth, Rene; Sonnabend, Kerstin [Goethe Universitaet Frankfurt am Main (Germany); Isaak, Johann; Loeher, Bastian; Savran, Deniz [GSI Helmholzzentrum fuer Schwerionenforschung (Germany); Tornow, Werner [Duke University (United States)

    2016-07-01

    The branch-point nucleus {sup 86}Rb determines the isotopic abundance ratio {sup 86}Sr/{sup 87}Sr in s-process nucleosynthesis. Thus, stellar parameters such as temperature and neutron density and their evolution in time as simulated by modern s-process network calculations can be constrained by a comparison of the calculated isotopic ratio with the one observed in SiC meteoritic grains. To this end, the radiative neutron-capture cross section of the unstable isotope {sup 86}Rb has to be known with sufficient accuracy. Since the short half-life of {sup 86}Rb prohibits the direct measurement, the nuclear-physics input to a calculation of the cross section has to be measured. For this reason, the γ-ray strength function of {sup 87}Rb was measured using the γ{sup 3} setup at the High Intensity γ-ray Source facility at TUNL in Durham, USA. First experimental results are presented.

  20. Inhibition of Escherichia coli precursor-16S rRNA processing by mouse intestinal contents

    DEFF Research Database (Denmark)

    Licht, Tine Rask; Tolker-Nielsen, Tim; Holmstrøm, Kim

    1999-01-01

    . We have applied fluorescence in situ hybridization of pre-16S rRNA to Escherichia coli cells growing in vitro in extracts from two different compartments of the mouse intestine: the caecal mucus layer, where E. coli grew rapidly, and the contents of the caecum, which supported much slower bacterial...... content of pre-16S rRNA than cultures of the same strain growing rapidly in rich media. We present results suggesting that the mouse intestinal contents contain an agent that inhibits the growth of E. coli by disturbing its ability to process pre-16S rRNA....

  1. Comparison of ship dismantling processes in India and the U.S.

    Science.gov (United States)

    Ahluwalia, Rashpal S.; Sibal, Pooja; Govindarajulu, Sriram

    2004-03-01

    This paper compares ship-dismantling processes in India and the U.S. The information for India was collected during an informal visit to the ship dismantling sites in Alang, India. The information for the U.S. was obtained from the MARAD report. For a 10,000-ton passenger ship, the Indian contractor makes a profit of about 24% compared to a loss of about 15% in the U.S. The loss in the US is primarily due to high labor costs, compliance to safety and health regulations and lack of market for used components and scrap metal.

  2. Experimental Designs in Sentence Processing Research: A Methodological Review and User's Guide

    Science.gov (United States)

    Keating, Gregory D.; Jegerski, Jill

    2015-01-01

    Since the publication of Clahsen and Felser's (2006) keynote article on grammatical processing in language learners, the online study of sentence comprehension in adult second language (L2) learners has quickly grown into a vibrant and prolific subfield of SLA. As online methods begin to establish a foothold in SLA research, it is important…

  3. ALARA Review of 233-S Process Hood D and D and Related Activities

    International Nuclear Information System (INIS)

    Landsman, S.D.

    1999-01-01

    This document is an as low as reasonably achievable (ALARA) review of design packages for planned work at the 233-S Facility. The ALARA review was initiated in accordance with the Bechtel Hanford, Inc. (BHI) Integrated Environmental, Safety, and Health Management System (ISMS) workflow process

  4. Perceptions of legally mandated public involvement processes in the U.S. Forest Service

    Science.gov (United States)

    S. Andrew Predmore; Marc J. Stern; Michael J. Mortimer; David N. Seesholtz

    2011-01-01

    Results from an agency-wide survey of U.S. Forest Service personnel indicate that respondents in our sample engage in National Environmental Policy Act (NEPA) public involvement processes primarily to accomplish two goals. The most commonly supported goal was to inform and disclose as mandated by the act. The other goal reflected interests in managing agency...

  5. Schmenner's Product-Process Matrix. A Critgue using S.A. Book Printers

    OpenAIRE

    M.S. Bukula; D.R. Snaddon

    2012-01-01

    This explores Schmenner's predictions of the product-process matrix using book printing firms in S.A . It measures focus in each book printing firm, and then examines relationships between measures. This study finds that these measures are not well behaved in the way Schmenner predicts and more research is needed on Schmenner's predictions .

  6. Personal identity processes from adolescence through the late 20s : Age trends, functionality, and depressive symptoms

    NARCIS (Netherlands)

    Luyckx, K.; Klimstra, T.A.; Duriez, B.; van Petegem, S.; Beyers, W.

    2013-01-01

    Personal identity formation constitutes a crucial developmental task during the teens and 20s. Using a recently developed five-dimensional identity model, this cross-sectional study (N = 5834) investigated age trends from ages 14 to 30 for different commitment and exploration processes. As expected,

  7. Developmental Changes in Children’s Processing of Redundant Modifiers in Definite Object Descriptions

    NARCIS (Netherlands)

    Koolen, Ruud; Krahmer, Emiel; Swerts, Marc

    2016-01-01

    This paper investigates developmental changes in children’s processing of redundant information in definite object descriptions. In two experiments, children of two age groups (6 or 7, and 9 or 10 years old) were presented with pictures of sweets. In the first experiment (pairwise comparison), two

  8. Socio-emotionally Significant Experience and Children’s Processing of Irrelevant Auditory Stimuli

    Science.gov (United States)

    Schermerhorn, Alice C.; Bates, John E.; Puce, Aina; Molfese, Dennis L.

    2017-01-01

    Theory and research indicate considerable influence of socio-emotionally significant experiences on children’s functioning and adaptation. In the current study, we examined neurophysiological correlates of children’s allocation of information processing resources to socio-emotionally significant events, specifically, simulated marital interactions. We presented 9- to 11-year-old children (n = 24; 11 females) with 15 videos of interactions between two actors posing as a married couple. Task-irrelevant brief auditory probes were presented during the videos, and event-related potentials (ERPs) elicited to the auditory probes were measured. As hypothesized, exposure to higher levels of interparental conflict was associated with smaller P1, P2, and N2 ERPs to the probes. This finding is consistent with the idea that children who had been exposed to more interparental conflict attended more to the videos and diverted fewer cognitive resources to processing the probes, thereby producing smaller ERPs to the probes. In addition, smaller N2s were associated with more child behavior problems, suggesting that allocating fewer processing resources to the probes was associated with more problem behavior. Results are discussed in terms of implications of socio-emotionally significant experiences for children’s processing of interpersonal interactions. PMID:27993611

  9. A Comparative Analysis of the Budget Process in the Venezuelan and U.S. Navies.

    Science.gov (United States)

    1979-12-01

    accounting problems in particular agencies. The DINCA developed a document, Sistema de Contabilidad de la Ejecucion Financiera del Presupuesto para...orienta- tion of the "Plan Operativo Anual" (POA) - Operative Annual Plan. During the Navy’s mid-range planning process the POA is produced. By means of

  10. Advanced Precursor Reaction Processing for Cu(InGa)(SeS)2 Solar Cells

    Energy Technology Data Exchange (ETDEWEB)

    Shafarman, William N. [Univ. of Delaware, Newark, DE (United States)

    2015-10-12

    This project “Advanced Precursor Reaction Processing for Cu(InGa)(SeS)2 Solar Cells”, completed by the Institute of Energy Conversion (IEC) at the University of Delaware in collaboration with the Department of Chemical Engineering at the University of Florida, developed the fundamental understanding and technology to increase module efficiency and improve the manufacturability of Cu(InGa)(SeS)2 films using the precursor reaction approach currently being developed by a number of companies. Key results included: (1) development of a three-step H2Se/Ar/H2S reaction process to control Ga distribution through the film and minimizes back contact MoSe2 formation; (2) Ag-alloying to improve precursor homogeneity by avoiding In phase agglomeration, faster reaction and improved adhesion to allow wider reaction process window; (3) addition of Sb, Bi, and Te interlayers at the Mo/precursor junction to produce more uniform precursor morphology and improve adhesion with reduced void formation in reacted films; (4) a precursor structure containing Se and a reaction process to reduce processing time to 5 minutes and eliminate H2Se usage, thereby increasing throughput and reducing costs. All these results were supported by detailed characterization of the film growth, reaction pathways, thermodynamic assessment and device behavior.

  11. Leveraging the BPEL Event Model to Support QoS-aware Process Execution

    Science.gov (United States)

    Zaid, Farid; Berbner, Rainer; Steinmetz, Ralf

    Business processes executed using compositions of distributed Web Services are susceptible to different fault types. The Web Services Business Process Execution Language (BPEL) is widely used to execute such processes. While BPEL provides fault handling mechanisms to handle functional faults like invalid message types, it still lacks a flexible native mechanism to handle non-functional exceptions associated with violations of QoS levels that are typically specified in a governing Service Level Agreement (SLA), In this paper, we present an approach to complement BPEL's fault handling, where expected QoS levels and necessary recovery actions are specified declaratively in form of Event-Condition-Action (ECA) rules. Our main contribution is leveraging BPEL's standard event model which we use as an event space for the created ECA rules. We validate our approach by an extension to an open source BPEL engine.

  12. Rolling Stock Planning at DSB S-tog - Processes, Cost Structures and Requirements

    DEFF Research Database (Denmark)

    Thorlacius, Per

    A central issue for operators of suburban passenger train transport systems is providing sufficient number of seats for the passengers while at the same time minimising operating costs. The process of providing this is called rolling stock planning. This technical report documents the terminology......, the processes, the cost structures and the requirements for rolling stock planning at DSB S-tog, the suburban passenger train operator of the City of Copenhagen. The focus of the technical report is directed at practical train operator oriented issues. The technical report is thought to serve as a basis...... for investigating better methods to perform the rolling stock planning (to be the topic of later papers). This technical report is produced as a part of the current industrial Ph. D. project to improve the rolling stock planning process of DSB S-tog....

  13. Health Reform in Ceará: the process of decentralisation in the 1990s

    Science.gov (United States)

    Medeiros, Regianne Leila Rolim; Atkinson, Sarah

    2015-01-01

    The objective of this article is to offer an overview of the health reform in Ceará focusing on the decentralisation process in the 1990s. The driving factor behind the Brazilian health reform movement was the necessity to reorganise the national health system and overcome inequalities. For the reformists, decentralisation, and together with it the idea of popular participation, is seen as essential to guarantee the fulfilment of the people’s needs and to incorporate their voice in the decision-making processes of the health system. In the state of Ceará, after the 1986 elections, health reform movement members took control over the management of the state Health Secretariat. This is the main cause of the acceleration of the decentralisation process with the transference of responsibility over the management of health care delivery to municipalities. PMID:25729333

  14. Solution-processed In2S3 buffer layer for chalcopyrite thin film solar cells

    Directory of Open Access Journals (Sweden)

    Wang Lan

    2016-01-01

    Full Text Available We report a route to deposit In2S3 thin films from air-stable, low-cost molecular precursor inks for Cd-free buffer layers in chalcopyrite-based thin film solar cells. Different precursor compositions and processing conditions were studied to define a reproducible and robust process. By adjusting the ink properties, this method can be applied in different printing and coating techniques. Here we report on two techniques, namely spin-coating and inkjet printing. Active area efficiencies of 12.8% and 12.2% have been achieved for In2S3-buffered solar cells respectively, matching the performance of CdS-buffered cells prepared with the same batch of absorbers.

  15. Kinetics of oxygen adsorption on ZnS nanoparticles synthesized by precipitation process

    Directory of Open Access Journals (Sweden)

    Ahmadi Reza

    2016-06-01

    Full Text Available ZnS nanoparticles were synthesized through a one-step precipitation process. Effect of time and temperature on the formation reaction was investigated. The synthesized samples were characterized by X-ray diffraction (XRD, ultraviolet (UV visible absorption and photoluminescence (PL spectrophotometry. Based on XRD and UV-Vis data, the particles produced at 70 °C had a mean particle size of about 5 nm. Increasing time and temperature of the synthesis reaction resulted in photoluminescence intensification. PL spectroscopy helped understanding the adsorption kinetics of oxygen on ZnS nanoparticles during the precipitation synthesis process. Fabrication of ZnS structures with appropriate oxygen adsorption capacity was suggested as a means of PL emission intensity control.

  16. Solution-processed In2S3 buffer layer for chalcopyrite thin film solar cells

    Science.gov (United States)

    Wang, Lan; Lin, Xianzhong; Ennaoui, Ahmed; Wolf, Christian; Lux-Steiner, Martha Ch.; Klenk, Reiner

    2016-02-01

    We report a route to deposit In2S3 thin films from air-stable, low-cost molecular precursor inks for Cd-free buffer layers in chalcopyrite-based thin film solar cells. Different precursor compositions and processing conditions were studied to define a reproducible and robust process. By adjusting the ink properties, this method can be applied in different printing and coating techniques. Here we report on two techniques, namely spin-coating and inkjet printing. Active area efficiencies of 12.8% and 12.2% have been achieved for In2S3-buffered solar cells respectively, matching the performance of CdS-buffered cells prepared with the same batch of absorbers.

  17. Astrophysical neutron capture rates in s- and r-process nucleosynthesis

    International Nuclear Information System (INIS)

    Beer, H.; Mohr, P.; Oberhummer, H.; Rauscher, T.; Mutti, P.; Corvi, F.; Sedyshev, P.V.; Popov, Yu.P.

    1997-01-01

    The astrophysical neutron capture rates of light and heavy nuclei are measured and calculated. The measurements are realized using the activation technique at the 3.75 MV Karlsruhe Van de Graaff accelerator and by means of the time-of-flight method at the Geel electron linear accelerator (GELINA). The setup for the fast cyclic activation measurements made on 26 Mg and 48 Ca, as well as on Pt isotopes is described. The time-of-flight method is used for neutron capture measurements of the bottleneck isotopes 138 Ba and 208 Pb. The calculations are made using direct and compound nuclear capture models. The s-process nucleosynthesis path in the Os and Pt mass region is discussed in details. It is shown that for 19 '1 Os, 192 Ir and 193 Pt there is a competition between β-decay and neutron capture. The β-decay half-lives are dependent on temperature and electron density of the s-process environment. The abundance of s-only 192 Pt originates from the branching at 191 Os and 192 Ir. The isotopes 190 Pt and 198 Pt are not on the s-process path, therefore the seed abundance vanish during nucleosynthesis. Calculations are carried out using parametrized models in order to reproduce the s-process abundance in the mass region from Os up to Pt. The neutron density is adjusted to reproduce the solar abundance of the s-only isotope 9 2 Pt in the analysis of the present branching especially

  18. Arguments for fundamental emission by the parametric process L yields T + S in interplanetary type III bursts. [langmuir, electromagnetic, ion acoustic waves (L, T, S)

    Science.gov (United States)

    Cairns, I. H.

    1984-01-01

    Observations of low frequency ion acoustic-like waves associated with Langmuir waves present during interplanetary Type 3 bursts are used to study plasma emission mechanisms and wave processes involving ion acoustic waves. It is shown that the observed wave frequency characteristics are consistent with the processes L yields T + S (where L = Langmuir waves, T = electromagnetic waves, S = ion acoustic waves) and L yields L' + S proceeding. The usual incoherent (random phase) version of the process L yields T + S cannot explain the observed wave production time scale. The clumpy nature of the observed Langmuir waves is vital to the theory of IP Type 3 bursts. The incoherent process L yields T + S may encounter difficulties explaining the observed Type 3 brightness temperatures when Langmuir wave clumps are incorporated into the theory. The parametric process L yields T + S may be the important emission process for the fundamental radiation of interplanetary Type 3 bursts.

  19. Study of the back recombination processes of PbS quantum dots sensitized solar cells

    Science.gov (United States)

    Badawi, Ali; Al-Hosiny, N.; Merazga, Amar; Albaradi, Ateyyah M.; Abdallah, S.; Talaat, H.

    2016-12-01

    In this study, the back recombination processes of PbS quantum dots sensitized solar cells (QDSSCs) has been investigated. PbS QDs were adsorbed onto titania electrodes to act the role of sensitizers using successive ionic layer adsorption and reaction (SILAR) technique. The energy band gaps of the synthesized PbS QDs/titania are ranged from 1.64 eV (corresponding to 756 nm) to 3.12 eV (397 nm) matching the whole visible solar spectrum. The hyperbolic band model (HBM) was used to calculate PbS QDs size and it ranges from 1.76 to 3.44 nm. The photovoltaic parameters (open circuit voltage Voc, short circuit current density Jsc, fill factor FF and efficiency η) of the assembled PbS QDs sensitized solar cells (QDSSCs) were determined under a solar illumination of 100 mW/cm2 (AM 1.5 conditions). The open circuit voltage-decay (OCVD) rates of the assembled PbS QDSSCs were measured. The time constant (τ) for PbS QDSSCs (4 SILAR cycles) shows one order of magnitude larger than that of PbS QDSSCs (8 SILAR cycles) as a result of a decreased electron-hole back recombination.

  20. Electric utility engineer`s FGD manual -- Volume 1: FGD process design. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-04

    Part 1 of the Electric Utility Engineer`s Flue Gas Desulfurization (FGD) Manual emphasizes the chemical and physical processes that form the basis for design and operation of lime- and limestone-based FGD systems applied to coal- or oil-fired steam electric generating stations. The objectives of Part 1 are: to provide a description of the chemical and physical design basis for lime- and limestone-based wet FGD systems; to identify and discuss the various process design parameters and process options that must be considered in developing a specification for a new FGD system; and to provide utility engineers with process knowledge useful for operating and optimizing a lime- or limestone-based wet FGD system.

  1. The professional’s orientation in the formative process for the bachelor’s general united students

    Directory of Open Access Journals (Sweden)

    Darwin Stalin Faz-Delgado

    2016-11-01

    Full Text Available In Ecuador Primary Education has as goal to develop the abilities, skills and linguistic competence in children and teenagers from 5 years old until they arrive to High School degree.  High School main objective is to provide to students a general and an interdisciplinary preparation that guide them to elaborate their life projects in order that they can fit in societyas responsible, critical and solidary human beings. It also has as intention to develop students’ abilities in knowledge acquisition and citizen competence and to prepare them to work, to learn and to access to University; this aspect establishes the importance of an adequate professional orientation that facilitates the conscious selection of their future profession and career. This article contains theoretical basis of process the formation and professional’s orientation in the High School, for the attention on the context of the Ecuador people.

  2. Analysis of architect’s performance indicators in project delivery process

    Science.gov (United States)

    Marisa, A.

    2018-03-01

    Architect as a professional in the construction industry should possess a good performance in project delivery process. As a design professional, architect has an important role to ensure that the process is well-conducted by delivering a high-quality product for the clients. Thus, analyzing architect’s performance indicators is crucial in the project delivery process. This study aims to analyze the relative importance of architect performance indicators in project delivery process among registered architects in North Sumatera, Indonesia. A total of five indicators that measure architect performance in project delivery process were identified and 110 completed questionnaires were obtained and used for data analysis. A relative importance index is used to rank the relative importance of architect performance indicators. Results indicate that focus on the clients is the most important indicator of architect performance in project delivery process. This study demonstrates project communication as one of crucial indicators perceived by the architects for measuring their performance, and fills a knowledge gap on the importance of identifying the most important indicator for measuring architect performance from their own perspectives which previous studies have overlooked to improve performance assessment in project delivery process.

  3. Methodology for the evaluation process in the director´s preparation from education.

    Directory of Open Access Journals (Sweden)

    Humberto Clemente Calderón Echevarría

    2014-03-01

    Full Text Available The presented work proposes a methodology oriented to the evaluation of the process of director´s preparation which may contribute to the improvement of the program. It explains the need of the evaluation, activity as such, indicators to evaluate, methods and techniques to be used and the steps in which have to be done. Until now doesn´t exist a methodology which can evaluate the process of directors’ preparation in the educational sector. The development of this methodology has as a background the result obtained by means of different investigations made in the Provincial Post Office and that later were applied in the Provincial Department of Education. Nowadays is perfected in the Pedagogical University "Capitán Silverio Blanco Núñez", thus, the employment opportunities in similar processes of other entities. In the proposed methodology is conceived that the process evaluation of the director’s preparation flows out in a cyclical manner, continuous, flexible, and interactive, away from the traditional linear formula, rigid and schematic. From the above idea it can be identify four stages, and the relevant procedures, the evaluation of the process of directors’ preparation in education.

  4. Student’s thinking process in solving word problems in geometry

    Science.gov (United States)

    Khasanah, V. N.; Usodo, B.; Subanti, S.

    2018-05-01

    This research aims to find out the thinking process of seventh grade of Junior High School in solve word problem solving of geometry. This research was descriptive qualitative research. The subject of the research was selected based on sex and differences in mathematical ability. Data collection was done based on student’s work test, interview, and observation. The result of the research showed that there was no difference of thinking process between male and female with high mathematical ability, and there were differences of thinking process between male and female with moderate and low mathematical ability. Also, it was found that male with moderate mathematical ability took a long time in the step of making problem solving plans. While female with moderate mathematical ability took a long time in the step of understanding the problems. The importance of knowing the thinking process of students in solving word problem solving were that the teacher knows the difficulties faced by students and to minimize the occurrence of the same error in problem solving. Teacher could prepare the right learning strategies which more appropriate with student’s thinking process.

  5. Fuel licensing process for an industrial use. ATF licensing process for an industrial use - Utility's perspective

    International Nuclear Information System (INIS)

    Waeckel, Nicolas

    2013-01-01

    To develop and license a breakthrough nuclear fuel technology for commercial use is becoming challenging. All the former safety analysis design limits (SAFDLs) defined in the 1970's for the standard UO 2 -Zr fuels, might no longer be applicable. Identification of the appropriate safety analysis design limits For each type of innovative fuel, the developers will have to identify and investigate all the possible failure/ruins scenarios (not only those related to severe accidents but also those related to normal operation). In order to save time and to focus on the best options, those failure scenarios (which could be 'killers' for the ATF concept) have to be determined early enough in the development process. Based on the above failure scenarios, the developers will have to propose the licensing limits (and the experimental protocol to determine and to justify them). As mentioned earlier, the licensing limits should not be defined against the accidental conditions only. For the operators, the (good) in-reactor fuel behaviour is crucial. As an example, in the case of the new fuel concepts coming with an outer coating, it is important to include the analysis of the consequences of the loss of this protective outer layer in the licensing process due to a manufacturing defect or an inevitable in-reactor fretting wear. Obviously, the new/specific SAFDLs will have to be endorsed by the regulators (which could be a long process by itself). Identification of a commercial reactor to irradiate the first ATF A commercial NPP is not a material test reactor (MTR); irradiating lead test fuel rods (LTFRs) or lead test assemblies (LTAs) implies strict requirements regarding the manufacturing processes [which should not include chemicals (additives or solvents) potentially incompatible with the nuclear technical specifications], the compatibility with the hosting fuel core (in terms of geometry, enrichment, thermal hydraulic performances, etc.) and the robustness and

  6. Searching for New Physics with b→sτ^{+}τ^{-} Processes.

    Science.gov (United States)

    Capdevila, Bernat; Crivellin, Andreas; Descotes-Genon, Sébastien; Hofer, Lars; Matias, Joaquim

    2018-05-04

    In recent years, intriguing hints for the violation of lepton flavor universality (LFU) have been accumulated in semileptonic B decays, both in the charged-current transitions b→cℓ^{-}ν[over ¯]_{ℓ} (i.e., R_{D}, R_{D^{*}}, and R_{J/ψ}) and the neutral-current transitions b→sℓ^{+}ℓ^{-} (i.e., R_{K} and R_{K^{*}}). Hints for LFU violation in R_{D^{(*)}} and R_{J/ψ} point at large deviations from the standard model (SM) in processes involving tau leptons. Moreover, LHCb has reported deviations from the SM expectations in b→sμ^{+}μ^{-} processes as well as in the ratios R_{K} and R_{K^{*}}, which together point at new physics (NP) affecting muons with a high significance. These hints for NP suggest the possibility of huge LFU-violating effects in b→sτ^{+}τ^{-} transitions. In this Letter, we predict the branching ratios of B→Kτ^{+}τ^{-}, B→K^{*}τ^{+}τ^{-}, and B_{s}→ϕτ^{+}τ^{-}, taking into account NP effects in the Wilson coefficients C_{9(^{'})}^{ττ} and C_{10(^{'})}^{ττ}. Assuming a common NP explanation of R_{D}, R_{D^{(*)}}, and R_{J/ψ}, we show that a very large enhancement of b→sτ^{+}τ^{-} processes, of around 3 orders of magnitude compared to the SM, can be expected under fairly general assumptions. We find that the branching ratios of B_{s}→τ^{+}τ^{-}, B_{s}→ϕτ^{+}τ^{-}, and B→K^{(*)}τ^{+}τ^{-} under these assumptions are in the observable range for LHCb and Belle II.

  7. The Role of Fe and Ni for S-process Nucleosynthesis and Innovative Nuclear Technologies

    CERN Document Server

    Giubrone, G; Perkowski, J; Andriamonje, S; Carrapico, C; Wallner, A; Vannini, G; Quesada, J M; Lederer, C; Tarrio, D; Berthier, B; Lozano, M; Krticka, M; Domingo-Pardo, C; Chiaveri, E; Jericha, E; Ferrari, A; Massimi, C; Avrigeanu, V; Martinez, T; Guerrero, C; Andrzejewski, J; Karadimos, D; Mendoza, E; Ganesan, S; Vlachoudis, V; Milazzo, P M; Cortes, G; Becares, V; Tain, J L; Variale, V; Quinones, J; Calvino, F; Kappeler, F; Gunsing, F; Gramegna, F; Colonna, N; Marrone, S; Lebbos, E; Paradela, C; Mastinu, P F; Vaz, P; Tassan-Got, L; Kadi, Y; Dillman, I; Cano-Ott, D; Brugger, M; Audouin, L; Fernandez-Ordonez, M; Sarmento, R; Becvar, F; Goncalves, I F; Martin-Fuertes, F; Cerutti, F; Pina, G; Mosconi, M; Tagliente, G; Duran, I; Berthoumieux, E; Praena, J; Ioannides, K; Weiss, C; Mirea, M; Gomez-Hornillos, M B; Vlastou, R; Calviani, M; Nolte, R; Mengoni, A; Gonzalez-Romero, E; Marganiec, J; Leeb, H; Heil, M; Meaze, M H; Pavlik, A; Belloni, F; Harrispopulos S

    2011-01-01

    The accurate measurement of neutron capture cross sections of all Fe and Ni isotopes is important for disentangling the contribution of the s-process and the r-process to the stellar nucleosynthesis of elements in the mass range 60 < A < 120. At the same time, Fe and Ni are important components of structural materials and improved neutron cross section data is relevant in the design of new nuclear systems. With the aim of obtaining improved capture data on all stable iron and nickel isotopes, a program of measurements has been launched at the CERN Neutron Time of Flight Facility n_TOF.

  8. High performance MoS2 TFT using graphene contact first process

    Directory of Open Access Journals (Sweden)

    Chih-Shiang Chang Chien

    2017-08-01

    Full Text Available An ohmic contact of graphene/MoS2 heterostructure is determined by using ultraviolet photoelectron spectroscopy (UPS. Since graphene shows a great potential to replace metal contact, a direct comparison of Cr/Au contact and graphene contact on the MoS2 thin film transistor (TFT is made. Different from metal contacts, the work function of graphene can be modulated. As a result, the subthreshold swing can be improved. And when VgS2 TFT, a new method using graphene contact first and MoS2 layer last process that can avoid PMMA residue and high processing temperature is applied. MoS2 TFT using this method shows on/off current ratio up to 6×106 order of magnitude, high mobility of 116 cm2/V-sec, and subthreshold swing of only 0.515 V/dec.

  9. Canada's deep geological repository for used nuclear fuel - site selection process update

    International Nuclear Information System (INIS)

    Facella, J.

    2014-01-01

    In 2007, the Government of Canada selected Adaptive Phased Management as Canada's plan for the long-term management of Canada's used nuclear fuel in a deep geological repository, located in an informed and willing host. The process of site selection is an important milestone in this program. The NWMO describes its approach to working collaboratively with communities which expressed interest in exploring the project, as well as Aboriginal communities in the area and other surrounding communities. The project is designed to be implemented through a long-term partnership involving the interested community, Aboriginal communities and surrounding communities working with the NWMO. (author)

  10. Decision making, procedural compliance, and outcomes definition in U.S. forest service planning processes

    International Nuclear Information System (INIS)

    Stern, Marc J.; Predmore, S. Andrew

    2011-01-01

    The National Environmental Policy Act (NEPA) dictates a process of analyzing and disclosing the likely impacts of proposed agency actions on the human environment. This study addresses two key questions related to NEPA implementation in the U.S. Forest Service: 1) how do Interdisciplinary (ID) team leaders and decision makers conceptualize the outcomes of NEPA processes? And 2), how does NEPA relate to agency decision making? We address these questions through two separate online surveys that posed questions about recently completed NEPA processes - the first with the ID team leaders tasked with carrying out the processes, and the second with the line officers responsible for making the processes' final decisions. Outcomes of NEPA processes include impacts on public relations, on employee morale and team functioning, on the achievement of agency goals, and on the achievement of NEPA's procedural requirements (disclosure) and substantive intent (minimizing negative environmental impacts). Although both tended to view public relations outcomes as important, decision makers' perceptions of favorable outcomes were more closely linked to the achievement of agency goals and process efficiency than was the case for ID team leaders. While ID team leaders' responses suggest that they see decision making closely integrated with the NEPA process, decision makers more commonly decoupled decision making from the NEPA process. These findings suggest a philosophical difference between ID team leaders and decision makers that may pose challenges for both the implementation and the evaluation of agency NEPA. We discuss the pros and cons of integrating NEPA with decision making or separating the two. We conclude that detaching NEPA from decision making poses greater risks than integrating them.

  11. Characterization of the ultrasonic welding process in the production of women's health devices

    International Nuclear Information System (INIS)

    Morales Elizondo, Jenniffer

    2014-01-01

    The characterization of the ultrasonic welding process in the area of women's health is performed to determine appropriate levels for the critical variables of the process to guarantee the quality specifications of the devices. The handle of the product A is detached. The assembly was made under pressure. Available technologies have been studied to comply with the regulations of medical industry to propose a change in process to a product B. The ultrasonic technology is used to weld the handle of the device to prevent the release of the two parts of the handle of the medical device. A variable characterization process was performed to determine which variables are critical to the process and define the operation parameters of ultrasonic welding. A number of designs of experiments is carried out, first the parameters behavior of the equipment is evaluated to analyze which have greater influence on the quality of the weld. A full factorial design was developed with all process input variables and input variables that are significant was performed another series of designs of experiments to determine the parameters of the process.The conclusion for the ultrasonic welding process in the product B has been that the critical variables or that have had a greater influence on the quality and appearance in experienced designs are: pressure and soldier collapse. The process of ultrasonic welded cycle has started to arrive at the value of driving force that tells the computer. The input variable is recommended to be the lowest possible to weld components using the ordering of particles product of ultrasonic welded avoiding compression component. (author) [es

  12. Prospects for direct neutron capture measurements on s-process branching point isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Guerrero, C.; Lerendegui-Marco, J.; Quesada, J.M. [Universidad de Sevilla, Dept. de Fisica Atomica, Molecular y Nuclear, Sevilla (Spain); Domingo-Pardo, C. [CSIC-Universidad de Valencia, Instituto de Fisica Corpuscular, Valencia (Spain); Kaeppeler, F. [Karlsruhe Institute of Technology, Institut fuer Kernphysik, Karlsruhe (Germany); Palomo, F.R. [Universidad de Sevilla, Dept. de Ingenieria Electronica, Sevilla (Spain); Reifarth, R. [Goethe-Universitaet Frankfurt am Main, Frankfurt am Main (Germany)

    2017-05-15

    The neutron capture cross sections of several unstable key isotopes acting as branching points in the s-process are crucial for stellar nucleosynthesis studies, but they are very challenging to measure directly due to the difficult production of sufficient sample material, the high activity of the resulting samples, and the actual (n, γ) measurement, where high neutron fluxes and effective background rejection capabilities are required. At present there are about 21 relevant s-process branching point isotopes whose cross section could not be measured yet over the neutron energy range of interest for astrophysics. However, the situation is changing with some very recent developments and upcoming technologies. This work introduces three techniques that will change the current paradigm in the field: the use of γ-ray imaging techniques in (n, γ) experiments, the production of moderated neutron beams using high-power lasers, and double capture experiments in Maxwellian neutron beams. (orig.)

  13. Implementation of 5S tools as a starting point in business process reengineering

    Directory of Open Access Journals (Sweden)

    Vorkapić Miloš 0000-0002-3463-8665

    2017-01-01

    Full Text Available The paper deals with the analysis of elements which represent a starting point in implementation of a business process reengineering. We have used Lean tools through the analysis of 5S model in our research. On the example of finalization of the finished transmitter in IHMT-CMT production, 5S tools were implemented with a focus on Quality elements although the theory shows that BPR and TQM are two opposite activities in an enterprise. We wanted to distinguish the significance of employees’ self-discipline which helps the process of product finalization to develop in time and without waste and losses. In addition, the employees keep their work place clean, tidy and functional.

  14. Secularization and de-secularization processes under the light of Max Weber’s rationalization sociology

    Directory of Open Access Journals (Sweden)

    Eduardo Weisz

    2017-10-01

    Full Text Available This article starts posing a number of problems with which the classical understanding of the end of religions in Modernity has been confronted. This allows for a framework from which Max Weber’s theory of secularization can be addressed. From 1904 onwards, this author was engaged in the understanding of the historical-universal process of rationalization, and it is in this analysis where his prospective of secularization has to be looked for. His sociology of religion is therefore deconstructed from this point of view, so as to grasp why he understood that religions were displaced in the constitution of modern life conducts. After this analysis, the article poses the importance of this author’s legacy for the understanding of different issues concerning the present process of rebirth of religions.

  15. Downstream gas processing opportunities arising from the 1990's quest for a quality environment

    International Nuclear Information System (INIS)

    Geren, P.M.

    1992-01-01

    Over the last several years the former wart on your favorite daughter's nose (gas liquids processing) has become a most cherished body part, to paraphrase 1991 remarks of a U.S. gas processing leader. The dramatic recent spreads between liquids prices and the cost of feedstock natural gas have provided spectacular performance for processors. However, market prices for liquids will probably track petroleum. One day soon natural gas's inherent value will rise to parity with petroleum on a heating value basis. As petroleum demands will probably be flat in the foreseeable term, and natural gas prices will rise, something must be done to preserve gas processors' margins. Radical change in the formulation of U.S. gasoline presents many opportunities for gas processor to diversify into synthesis of upgraded derivatives of natural gas and liquids, which derivatives have high value-added characteristics. Issues relating to the selection of derivatives, the required technology, and capital project considerations are discussed in this paper

  16. Progress in the application of classical S-matrix theory to inelastic collision processes

    International Nuclear Information System (INIS)

    McCurdy, C.W.; Miller, W.H.

    1980-01-01

    Methods are described which effectively solve two of the technical difficulties associated with applying classical S-matrix theory to inelastic/reactive scattering. Specifically, it is shown that rather standard numerical methods can be used to solve the ''root search'' problem (i.e., the nonlinear boundary value problem necessary to impose semiclassical quantum conditions at the beginning and the end of the classical trajectories) and also how complex classical trajectories, which are necessary to describe classically forbidden (i.e., tunneling) processes, can be computed in a numerically stable way. Application is made to vibrational relaxation of H 2 by collision with He (within the helicity conserving approximation). The only remaining problem with regard to applying classical S-matrix theory to complex collision processes has to do with the availability of multidimensional uniform asymptotic formulas for interpolating the ''primitive'' semiclassical expressions between their various regions of validity

  17. The Godfather: A Translator’s and Writer’s Subconscious and Conscious Skills in the Process of Evoking Reader’s Emotions

    Directory of Open Access Journals (Sweden)

    Dziurawiec Dominika

    2016-09-01

    Full Text Available The article is an unyielding argument supporting the thesis that not only a writer, but also a translator is expected to use their creativity so that nothing is lost in translation. Amongst various factors that influence the process of translating a novel the article focuses on two of them: a translator should stick to the original text with taking the semantic fields differences into account while s/he should keep the atmosphere of the source language, making as little changes in the target language as possible. Marking a translator’s existence in a text is strongly connected with a perlocutionary act. A great example of the translation that covers both principles is The Godfather, written by Mario Puzo and translated from English into Polish by Bronisław Zieliński. He translated only English words into Polish, leaving the target Italian words with no metamorphosis. The article presents the effect obtained by such an action.

  18. Past and Present of the s Process: a Nuclear Physicist's View

    International Nuclear Information System (INIS)

    Kaeppeler, F.

    2008-01-01

    The history of nuclear physics data for s-process calculations are briefly reviewed with emphasis on the actual status of the neutron capture cross sections. The remaining challenges will be illustrated and discussed in the light of new or optimized methods and state-of-the-art facilities, indicating the potential for accurate measurements and the possibility to study cross sections of radioactive isotopes. These opportunities will be considerably enriched by the enormous improvements provided by upcoming new facilities

  19. Binary stars as sources of iron and of s-process isotopes

    International Nuclear Information System (INIS)

    Iben, Icko Jr.; Bologna Univ.; Sussex Univ., Brighton

    1986-01-01

    Sources of elements and isotopes in stars, during the development of stars, is examined. The paper was presented to the conference on ''The early universe and its evolution'', Erice, Italy, 1986. Intermediate mass stars in their asymptotic giant branch phase of evolution as sources of carbon, merging white dwarfs as sources of iron, and helium star cataclysmics as sources of s-process elements, are all discussed. (U.K.)

  20. Pre-Service Mathematics Teachers’ Problem Solving Processes with Geometer’s Sketchpad: Mirror Problem

    OpenAIRE

    ÖÇAL, Mehmet Fatih; ŞİMŞEK, Mertkan

    2016-01-01

    Problem solving skill is the core of mathematics education and its importance cannot be denied. This study specifically examined 56 freshmen pre-service mathematics teachers’ problem solving processes on a specific problem with the help of Geometer’s Sketchpad (GSP). They were grouped into two-person teams to solve a problem called "the mirror problem". They were expected to solve it by means of GSP. According to their works on GSP and related reflections, there appeared two differe...

  1. THE ANALYSIS OF ACER COMPUTER’S INTERNATIONALIZATION PROCESS FROM THE RESOURCE-BASED VIEW

    OpenAIRE

    HUANG, YING TZU

    2009-01-01

    This paper focuses on the analysis of Acer Corporation’s internationalisation process from the Resource-Based view, RBV. Qualitative research method will be adopted in terms of the data collection throughout the entire research. It aims to examine the business strategies that Acer has adopted in terms of resources gathering and development. In addition, its internationalization pattern will also be compared and analyzed with the established theories such as the Uppsala Model, to see if it ...

  2. The Future of Nearshore Processes Research: U.S. Integrated Coastal Research Program

    Science.gov (United States)

    Elko, N.; Feddersen, F.; Foster, D. L.; Hapke, C. J.; Holman, R. A.; McNinch, J.; Mulligan, R. P.; Ozkan-Haller, H. T.; Plant, N. G.; Raubenheimer, B.

    2016-02-01

    The authors, representing the acting Nearshore Advisory Council, have developed an implementation plan for a U.S. Nearshore Research Program based on the 2015 Future of Nearshore Processes report that was authored by the nearshore community. The objectives of the plan are to link research programs across federal agencies, NGOs, industry, and academia into an integrated national program and to increase academic and NGO participation in federal agency nearshore processes research. A primary recommendation is interagency collaboration to build a research program that will coordinate and fund U.S. nearshore processes research across three broad research themes: 1) long-term coastal evolution due to natural and anthropogenic processes; 2) extreme events; and 3) physical, biological and chemical processes impacting human and ecosystem health. The plan calls for a new program to be developed by an executive committee of federal agency leaders, NGOs, and an academic representative, created similarly to the existing NOPP program. This leadership will be established prior to the 2016 Ocean Sciences meeting and will have agreed on responsibilities and a schedule for development of the research program. To begin to understand the scope of today's U.S. coastal research investment, a survey was distributed to ten federal agency R&D program heads. Six of the ten agencies indicated that they fund coastal research, with a combined annual coastal research budget of nearly 100 million (NSF has not responded). The priority of the three research themes were ranked nearly equally and potential research support ranged from 15-19 million for each theme, with approximately 12 million as direct contribution to academic research. Beyond addressing our fundamental science questions, it is critical that the nearshore community stay organized to represent academic interests on the new executive committee. The program goal is the integration of academic, NGO, and federal agencies.

  3. The Establishment of China’s New Type Rural Social Insurance Pension: A Process Perspective

    Directory of Open Access Journals (Sweden)

    Matthias Stepan

    2016-01-01

    Full Text Available This study explores the processes and outcomes of the public policy reforms from 2002 to 2014, targeting income security among the elderly for a segment of the Chinese population that was increasingly marginalised throughout the 1990s: the rural population. The authors reconstruct the policy process from 2002 until 2014 that led to the establishment of the New Type Rural Social Insurance Pension and assess its impact on providing adequate and sustainable old-age income. One particular focus is the study of the influence of international actors. Yet, as key to the success of the initiative, the authors identify the decisive support of the central level leadership, which facilitated the process by announcing a new development model and providing earmarked transfers from the central government. Despite the improvements in the income security of elderly rural Chinese, questions remain about the Chinese pension system’s long-term sustainability and the influence of the system’s fragmentation on social mobility and equality.

  4. On the processes of generation of particles in the extended S-matrix method

    International Nuclear Information System (INIS)

    Dushutin, N.K.; Mal'tsev, V.M.; Sinegovskij, S.I.

    1975-01-01

    In order to understand the processes of hadron multiple production very important are integral characteristics, such as the multiplicity distribution function Psub(n)=sigmasub(n)/sigmasub(inel) and correlation parameters of fsub(K). From the shape of distribution and the energy dependence of correlation parameters one may arrive at definite conclusions about the interaction dynamics. In the paper a possibility is studied of obtaining integral characteristics in the S matrix formulation of the quantum field theory. This technique is based on principles of the scattering matrix expanding beyond the energy surface (ES). This follows from the fact that the predetermination of the scattering matrix on the ES does not permit strict to determinate the condition for causality. The expansion of S matrix is performed by introducing some object described by a substantial function rho(x) and interacting with a quantum system, properties of rho(x) being such that the space of asymptotic states remains complete for the expanded matrix also, i.e., the unitarity condition is fulfilled for S(rho) too. The expansion of S-matrix over the function of the interaction insertion g(x) and the transition to the differential equations for the coupling constant allowed investigation of hadron inelastic processes at some simplifying suppositions. Experimental data do not contradict in the main the proposed picture of interactions [ru

  5. Loss mechanisms in hydrazine-processed Cu2ZnSn(Se,S)4 solar cells

    Science.gov (United States)

    Gunawan, Oki; Todorov, Teodor K.; Mitzi, David B.

    2010-12-01

    We present a device characterization study for hydrazine-processed kesterite Cu2ZnSn(Se,S)4 (CZTSSe) solar cells with a focus on pinpointing the main loss mechanisms limiting device efficiency. Temperature-dependent study and time-resolved photoluminescence spectroscopy on these cells, in comparison to analogous studies on a reference Cu(In,Ga)(Se,S)2 (CIGS) cell, reveal strong recombination loss at the CZTSSe/CdS interface, very low minority-carrier lifetimes, and high series resistance that diverges at low temperature. These findings help identify the key areas for improvement of these CZTSSe cells in the quest for a high-performance indium- and tellurium-free solar cell.

  6. Process Skill Assessment Instrument: Innovation to measure student’s learning result holistically

    Science.gov (United States)

    Azizah, K. N.; Ibrahim, M.; Widodo, W.

    2018-01-01

    Science process skills (SPS) are very important skills for students. However, the fact that SPS is not being main concern in the primary school learning is undeniable. This research aimed to develop a valid, practical, and effective assessment instrument to measure student’s SPS. Assessment instruments comprise of worksheet and test. This development research used one group pre-test post-test design. Data were obtained with validation, observation, and test method to investigate validity, practicality, and the effectivenss of the instruments. Results showed that the validity of assessment instruments is very valid, the reliability is categorized as reliable, student SPS activities have a high percentage, and there is significant improvement on student’s SPS score. It can be concluded that assessment instruments of SPS are valid, practical, and effective to be used to measure student’s SPS result.

  7. Modernization of Ethnocultural Processes in the National Areas of the Far East (1920s – 1930s years

    Directory of Open Access Journals (Sweden)

    Anna V. Akhmetova

    2015-09-01

    Full Text Available The article deals with the history of socialistic modernization of traditional ethnic groups of the Russian Far East in 1920s-1930s on the basis of the unpublished documents from federal and national archives introduced for scientific use for the first time. The increased focus is put on the problems of transformation of ethnical and cultural processes in the national areas of the Far East where the role of the Committees for Affairs of the North was fundamental. The key areas of radical changes included educational and fostering institutions, medical, sanitary and hygienic services of the native minorities of the Far East. Outreach centers, innovative schools, northern branches of the leading Institutions of Higher Education became the institutional basis for moderniztion. The main problem at this stage was training of teaching staff. Lack of teachers in the first instance created a considerable obstruction to modernization activities. A lot of efforts were spent to development of a hospital system in national areas. However this goal had not been achieved in pre-war period. The conclusion on critical consequences of these activities for further development of intellectual and material culture of aborigines including the formation of national clerisy was made. The development of clerisy among the peoples of the North was considered the most effective way of their integration into the Soviet system. The Soviet government did not always take into account special aspects of life and traditions of the native minorities of the Far East, the peculiarities of their material and intellectual culture. The forced modernization of the country resulted in unrecoverable damage to the traditional culture of the indigenous peoples who had just reached the primitive communal system breakup stage and created on its ruins the new socialist culture acceptable to the Soviet state.

  8. All-solution-processed PbS quantum dot solar modules

    Science.gov (United States)

    Jang, Jihoon; Shim, Hyung Cheoul; Ju, Yeonkyeong; Song, Jung Hoon; An, Hyejin; Yu, Jong-Su; Kwak, Sun-Woo; Lee, Taik-Min; Kim, Inyoung; Jeong, Sohee

    2015-05-01

    A rapid increase in power conversion efficiencies in colloidal quantum dot (QD) solar cells has been achieved recently with lead sulphide (PbS) QDs by adapting a heterojunction architecture, which consists of small-area devices associated with a vacuum-deposited buffer layer with metal electrodes. The preparation of QD solar modules by low-cost solution processes is required to further increase the power-to-cost ratio. Herein we demonstrate all-solution-processed flexible PbS QD solar modules with a layer-by-layer architecture comprising polyethylene terephthalate (PET) substrate/indium tin oxide (ITO)/titanium oxide (TiO2)/PbS QD/poly(3-hexylthiophene) (P3HT)/poly(3,4-ethylenedioxythiophene) : poly(styrene sulfonate) (PEDOT : PSS)/Ag, with an active area of up to 30 cm2, exhibiting a power conversion efficiency (PCE) of 1.3% under AM 1.5 conditions (PCE of 2.2% for a 1 cm2 unit cell). Our approach affords trade-offs between power and the active area of the photovoltaic devices, which results in a low-cost power source, and which is scalable to larger areas.A rapid increase in power conversion efficiencies in colloidal quantum dot (QD) solar cells has been achieved recently with lead sulphide (PbS) QDs by adapting a heterojunction architecture, which consists of small-area devices associated with a vacuum-deposited buffer layer with metal electrodes. The preparation of QD solar modules by low-cost solution processes is required to further increase the power-to-cost ratio. Herein we demonstrate all-solution-processed flexible PbS QD solar modules with a layer-by-layer architecture comprising polyethylene terephthalate (PET) substrate/indium tin oxide (ITO)/titanium oxide (TiO2)/PbS QD/poly(3-hexylthiophene) (P3HT)/poly(3,4-ethylenedioxythiophene) : poly(styrene sulfonate) (PEDOT : PSS)/Ag, with an active area of up to 30 cm2, exhibiting a power conversion efficiency (PCE) of 1.3% under AM 1.5 conditions (PCE of 2.2% for a 1 cm2 unit cell). Our approach affords trade

  9. s-process studies in the light of new experimental cross sections: Distribution of neutron fluences and r-process residuals

    International Nuclear Information System (INIS)

    Kaeppeler, F.; Beer, H.; Wisshak, K.; Clayton, D.D.; Macklin, R.L.; Ward, R.A.

    1981-08-01

    A best set of neutron-capture cross sections has been evaluated for the most important s-process isotopes. With this data base, s-process studies have been carried out using the traditional model which assumes a steady neutron flux and an exponential distribution of neutron irradiations. The calculated sigmaN-curve is in excellent agreement with the empirical sigmaN-values of pure s-process nuclei. Simultaneously, good agreement is found between the difference of solar and s-process abundances and the abundances of pure r-process nuclei. We also discuss the abundance pattern of the iron group elements where our s-process results complement the abundances obtained from explosive nuclear burning. The results obtained from the traditional s-process model such as seed abundances, mean neutron irradiations, or neutron densities are compared to recent stellar model calculations which assume the He-burning shells of red giant stars as the site for the s-process. (orig.) [de

  10. Interface charge transfer process in ZnO:Mn/ZnS nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Stefan, M.; Toloman, D., E-mail: dana.toloman@itim-cj.ro; Popa, A. [National Institute for R & D of Isotopic and Molecular Technology (Romania); Mesaros, A. [Technical University of Cluj-Napoca, Superconductivity, Spintronics and Surface Science Center – C4S (Romania); Vasile, O. R. [University “Politehnica” from Bucharest, Faculty of Applied Chemistry and Material Science (Romania); Leostean, C.; Pana, O. [National Institute for R & D of Isotopic and Molecular Technology (Romania)

    2016-03-15

    ZnO:Mn/ZnS nanocomposites were prepared by seed-mediated growth of ZnS QDs onto the preformed ZnO:Mn nanoparticles. The formation of the nanocomposite structure has been evidenced by XRD, HRTEM, and XPS. The architecture of the nanocomposite with outer ZnS QDs around ZnO:Mn cores is sustained by the sulfur and oxygen depth profiles resulted from XPS. When the two components are brought together, the band gap of ZnS component decreases while that of ZnO:Mn increases. It is the result of interface charge transfer from ZnO:Mn to ZnS QDs. Here ZnO:Mn valence states are extended through the interface into unoccupied gap states of ZnS. The energy band setup is modified from a type II into a type I band alignment. The process is accompanied by enhancement of composite UV emission of PL spectra as compared to its counterparts. The charge transfer from valence band also determines the increase of the core-polarization effect of sshell electrons at Mn{sup 2+} nucleus, thus determining the increase of the hyperfine field through the reduction of the covalency degree of Zn(Mn)–O bonds. The quantum confinement in ZnS QDs promotes the ferromagnetic coupling of singly occupied states due to Zn vacancies determining a superparamagnetic behavior of the ensemble. When the nanocomposites are formed, due to interface charge transfer effects, an increased number of filled cation vacancies in ZnS QDs develop, thus disrupting the pre-existing ferromagnetic coupling between spins resulting in a significant reduction of the overall saturation magnetization. The possibility to modulate nanocomposite properties by controlling the interface interactions may be foreseen in these types of materials.

  11. Comparison of sEMG processing methods during whole-body vibration exercise.

    Science.gov (United States)

    Lienhard, Karin; Cabasson, Aline; Meste, Olivier; Colson, Serge S

    2015-12-01

    The objective was to investigate the influence of surface electromyography (sEMG) processing methods on the quantification of muscle activity during whole-body vibration (WBV) exercises. sEMG activity was recorded while the participants performed squats on the platform with and without WBV. The spikes observed in the sEMG spectrum at the vibration frequency and its harmonics were deleted using state-of-the-art methods, i.e. (1) a band-stop filter, (2) a band-pass filter, and (3) spectral linear interpolation. The same filtering methods were applied on the sEMG during the no-vibration trial. The linear interpolation method showed the highest intraclass correlation coefficients (no vibration: 0.999, WBV: 0.757-0.979) with the comparison measure (unfiltered sEMG during the no-vibration trial), followed by the band-stop filter (no vibration: 0.929-0.975, WBV: 0.661-0.938). While both methods introduced a systematic bias (P interpolation method and the band-stop filter was comparable. The band-pass filter was in poor agreement with the other methods (ICC: 0.207-0.697), unless the sEMG(RMS) was corrected for the bias (ICC ⩾ 0.931, %LOA ⩽ 32.3). In conclusion, spectral linear interpolation or a band-stop filter centered at the vibration frequency and its multiple harmonics should be applied to delete the artifacts in the sEMG signals during WBV. With the use of a band-stop filter it is recommended to correct the sEMG(RMS) for the bias as this procedure improved its performance. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. SKI's engagement in the process for siting a spent nuclear fuel repository

    Energy Technology Data Exchange (ETDEWEB)

    Paeivioe Jonsson, Josefin; Westerlind, Magnus [Swedish Nuclear Power Inspectorate, Stockholm (Sweden)

    2006-09-15

    In Sweden, issues concerning the disposal of nuclear waste historically required co-operation among primarily two main actors: The nuclear industry and the state. Municipalities involved in SKB's feasibility studies objected to the fact that they lacked resources to keep the people in the municipality informed about the ongoing work. As a result the Parliament decided that municipalities involved in SKB's siting process should receive money from the nuclear waste fund for their engagement. Since 2005 resources also have been made available for NGO's participating in SKB's ongoing EIA-process. In total they can yearly receive up to 2.5 million Swedish kronor. The fact that new actors continuously have been engaged in disposal of spent nuclear fuel has meant that 'old' actors, particularly SKB, the regulators (the Swedish Nuclear Power Inspectorate, SKI, and the Swedish Radiation Protection Authority, SSI) have had to evaluate, develop and clarify their roles and strategies for dialogue and regulatory oversight. This paper presents the effects the increased engagement has had on SKI's regulatory activities. Looking back it is possible to identify two well-defined break points in SKI's views on communication and active participation in the siting process. The first was the so-called DIALOGUE-project, which was initiated by SKI in the early 1990s. In this research project there were participants from e.g. SKI and SSI, municipalities and environmental organisations. The two most important conclusions for SKI were firstly that regulators can and should participate already in the early stages of a siting process, and that this can be done without loosing credibility as an independent reviewer of a licence application and secondly that actors (in the siting process) with conflicting interests and views can reach agreement on the basis for decisions. The second break point occurred in the mid 1990s when SKB announced that the

  13. Developing and enforcing internal information systems standards: InduMaker’s Standards Management Process

    Directory of Open Access Journals (Sweden)

    Claudia Loebbecke

    2016-01-01

    Full Text Available It is widely agreed that standards provide numerous benefits when available and enforced. Company-internal Information Systems (IS management procedures and solutions, in the following coined IS ‘standards’, allow for harmonizing operations between company units, locations and even different service providers. However, many companies lack an organized process for defining and managing internal IS standards, which causes uncertainties and delays in decision making, planning, and design processes. In this case study of the globally operating InduMaker (anonymized company name, an established manufacturing supplier, we look into the company-internal management of IS standards. Theoretically grounded in the organizational and IS-focused literature on business process modelling and business process commoditization, we describe and investigate InduMaker’s newly developed Standard Management Process (SMP for defining and managing company-internal business and IS standards, with which the multinational pursues offering clear answers to business and IT departments about existing IS standards, their degree of obligation, applicability, and scope at any time.

  14. The process of internationalization and expatriation: the case of Weg S.A in China

    Directory of Open Access Journals (Sweden)

    Janaina Mortari Schiavini

    2012-06-01

    Full Text Available This article aims to analyze the process of internationalization and expatriation of WEG Electrical Equipment S.A in China. The recent movement of internationalization of Brazilian companies is characterized by cases of multinationals such as WEG, which performs Foreign Direct Investments in search for increasing their participation in international business and gain of competitive advantage. This study has a descriptive character and qualitative nature, using the case study as research method, in which the objects of observation were the processes of internationalization and expatriation of WEG in China. First, secondary data was used aiming to characterize the decision of entry mode in China and their process of internationalization. Later, a semi-structured interview was held, whose questions attempted to understand how the process of expatriation of employees of WEG in the Chinese mission happened. The results show the challenges faced by the company with their inclusion in the Asian market, the determining aspects of the expatriation process and its relation to theoretical models. It is expected that this work contribute to generate knowledge about the internationalization of Brazilian companies and the leading of their expatriations, since those themes demand for conclusive research for clarification of the theoretical models on the Brazilian reality.

  15. Searching for New Physics with b →s τ+τ- Processes

    Science.gov (United States)

    Capdevila, Bernat; Crivellin, Andreas; Descotes-Genon, Sébastien; Hofer, Lars; Matias, Joaquim

    2018-05-01

    In recent years, intriguing hints for the violation of lepton flavor universality (LFU) have been accumulated in semileptonic B decays, both in the charged-current transitions b →c ℓ-ν¯ℓ(i.e., RD, RD*,and RJ /ψ) and the neutral-current transitions b →s ℓ+ℓ-(i.e., RK and RK*). Hints for LFU violation in RD(*) and RJ /ψ point at large deviations from the standard model (SM) in processes involving tau leptons. Moreover, LHCb has reported deviations from the SM expectations in b →s μ+μ- processes as well as in the ratios RK and RK*, which together point at new physics (NP) affecting muons with a high significance. These hints for NP suggest the possibility of huge LFU-violating effects in b →s τ+τ- transitions. In this Letter, we predict the branching ratios of B →K τ+τ-, B →K*τ+τ-, and Bs→ϕ τ+τ-, taking into account NP effects in the Wilson coefficients C9(') ττ and C10(') τ τ. Assuming a common NP explanation of RD , RD(*), and RJ /ψ, we show that a very large enhancement of b →s τ+τ- processes, of around 3 orders of magnitude compared to the SM, can be expected under fairly general assumptions. We find that the branching ratios of Bs→τ+τ-, Bs→ϕ τ+τ-, and B →K(*)τ+τ- under these assumptions are in the observable range for LHCb and Belle II.

  16. Processing of self versus non-self in Alzheimer’s disease

    Directory of Open Access Journals (Sweden)

    Rebecca Louise Bond

    2016-03-01

    Full Text Available Despite considerable evidence for abnormalities of self-awareness in Alzheimer’s disease (AD, the cognitive mechanisms of altered self-processing in AD have not been fully defined. Here we addressed this issue in a detailed analysis of self/non-self-processing in three patients with AD. We designed a novel neuropsychological battery comprising tests of tactile body schema coding, attribution of tactile events to self versus external agents, and memory for self- versus non-self-generated vocal information, administered in conjunction with a daily life measure of self/non-self-processing (the Interpersonal Reactivity Index. Three male AD patients (aged 54 to 68 years; one with a pathogenic mutation in the Presenilin 1 gene, one with a pathogenic mutation in the Amyloid Precursor Protein gene, and one with a CSF protein profile supporting underlying AD pathology were studied in relation to a group of eight healthy older male individuals (aged 58 to 74 years. Compared to healthy controls, all patients had relatively intact tactile body schema processing. In contrast, all patients showed impaired memory for words previously presented using the patient’s own voice whereas memory for words presented in other voices was less consistently affected. Two patients showed increased levels of emotional contagion and reduced perspective taking on the Interpersonal Reactivity Index. Our findings suggest that AD may be associated with deficient self /non-self differentiation over time despite a relatively intact body image: this profile of altered self-processing contrasts with the deficit of tactile body schema previously described in frontotemporal dementia associated with C9orf72 mutations. We present these findings as a preliminary rationale to direct future systematic study in larger patient cohorts.

  17. Processing of the 17-S Escherichia coli precursor RNA in the 27-S pre-ribosomal particle

    Energy Technology Data Exchange (ETDEWEB)

    Hayes, F; Vasseur, M [Institut de Biologie Physico-Chimique, 75 - Paris (France)

    1976-01-01

    An RNase activity probably involved in the maturation of 16-S pre-ribosomal RNA in Escherichia coli has been partially purified from crude cell extracts. When 27-S ribosome precursor particles are incubated with this enzyme preparation in vitro, their 17-S RNA is converted to a product with the same electrophoretic mobility as mature 16-S rRNA. FingerprS rRNA. Generation of the normal 5'-P terminus seems to require a factor present in cell extracts since incubation of the 27-S precursor particle in an extract obtained after centrifugation at 30,000 x g causes conversion of the 17-S RNA to a 16-S species containing both termini of mature 16-S rRNS. Preliminary experiments suggest that correct maturation of the 5' end of the 17-S precursor RNA requires a system in which protein synthesis can take place.

  18. Thermal- and urea-induced unfolding processes of glutathione S-transferase by molecular dynamics simulation.

    Science.gov (United States)

    Li, Jiahuang; Chen, Yuan; Yang, Jie; Hua, Zichun

    2015-05-01

    The Schistosoma juponicum 26 kDa glutathione S-transferase (sj26GST) consists of the N-terminal domain (N-domain), containing three alpha-helices (named H1-H3) and four anti-parallel beta-strands (S1-S4), and the C-terminal domain (C-domain), comprising five alpha-helices (named H4-H8). In present work, molecular dynamics simulations and fluorescence spectroscopic were used to gain insights into the unfolding process of sj26GST. The molecular dynamics simulations on sj26GST subunit both in water and in 8 M urea were carried out at 300 K, 400 K and 500 K, respectively. Spectroscopic measurements were employed to monitor structural changes. Molecular dynamics simulations of sj26GST subunit induced by urea and temperature showed that the initial unfolding step of sj26GST both in water and urea occurred on N-domain, involving the disruption of helices H2, H3 and strands S3 and S4, whereas H6 was the last region exposed to solution and was the last helix to unfold. Moreover, simulations analyses combining with fluorescence and circular dichroism spectra indicated that N-domain could not fold independent, suggesting that correct folding of N-domain depended on its interactions with C-domain. We further proposed that the folding of GSTs could begin with the hydrophobic collapse of C-domain whose H4, H5, H6 and H7 could move close to each other and form a hydrophobic core, especially H6 wrapped in the hydrophobic center and beginning spontaneous formation of the helix. S3, S4, H3, and H2 could form in the wake of the interaction between C-domain and N-domain. The paper can offer insights into the molecular mechanism of GSTs unfolding. © 2014 Wiley Periodicals, Inc.

  19. Tackling the s-process stellar neutron density via the 147Pm(n,?) reaction

    CERN Multimedia

    Branching points along the reaction path of the slow nucleosynthesis process are very special isotopes for which there is competition between neutron capture and β-decay. The accurate knowledge of the decay properties and capture cross sections in the vicinity of these branching points are of key importance for determining the stellar conditions, namely the neutron density and temperature during the main s-process component in low-mass AGB stars. However, accurate values of these quantities, in particular capture cross sections at the corresponding stellar temperatures, are difficult to measure; thus data are very scarce and, when existing, very limited. For the particular and important case of the branching at A=147/148, the main branching point is $^{147}$Pm; for which there was a very challenging and successful activation measurement in 2003 at the stellar neutron energy of kT=25 keV using just 28 ng of material. In the main s-process, however, 95% of the neutron exposure takes place during H-burning epis...

  20. 21st Century Parent-Child Sex Communication in the U.S.: A Process Review

    Science.gov (United States)

    Flores, Dalmacio; Barroso, Julie

    2018-01-01

    Parent-child sex communication results in the transmission of family expectations, societal values, and role modeling of sexual health risk reduction strategies. Parent-child sex communication’s potential to curb negative sexual health outcomes has sustained a multidisciplinary effort to better understand the process and its impact on the development of healthy sexual attitudes and behaviors among adolescents. This review advances what is known about the process of sex communication in the U.S. by reviewing studies published from 2003 to 2015. We used CINAHL, PsycInfo and Pubmed, the key-terms “parent child” AND “sex education” for the initial query; we included 116 original articles for analysis. Our review underscores long-established factors that prevent parents from effectively broaching and sustaining talks about sex with their children and has also identified emerging concerns unique to today’s parenting landscape. Parental factors salient to sex communication are established long before individuals become parents and are acted upon by influences beyond the home. Child-focused communication factors likewise describe a maturing audience that is far from captive. The identification of both enduring and emerging factors that affect how sex communication occurs will inform subsequent work that will result in more positive sexual health outcomes for adolescents. PMID:28059568

  1. New approach for risk based inspection of H2S based Process Plants

    International Nuclear Information System (INIS)

    Vinod, Gopika; Sharma, Pavan K.; Santosh, T.V.; Hari Prasad, M.; Vaze, K.K.

    2014-01-01

    Highlights: • Study looks into improving the consequence evaluation in risk based inspection. • Ways to revise the quantity factors used in qualitative approach. • New approach based on computational fluid dynamics along with probit mathematics. • Demonstrated this methodology along with a suitable case study for the said issue. - Abstract: Recent trend in risk informed and risk based approaches in life management issues have certainly put the focus on developing estimation methods for real risk. Idea of employing risk as an optimising measure for in-service inspection, termed as risk based inspection, was accepted in principle from late 80s. While applying risk based inspection, consequence of failure from each component needs to be assessed. Consequence evaluation in a Process Plant is a crucial task. It may be noted that, in general, the number of components to be considered for life management is very large and hence the consequence evaluation resulting from their failures (individually) is a laborious task. Screening of critical components is usually carried out using simplified qualitative approach, which primarily uses influence factors for categorisation. This necessitates logical formulation of influence factors and their ranges with a suitable technical basis for acceptance from regulators. This paper describes application of risk based inspection for H 2 S based Process Plant along with the approach devised for handling the influence factor related to the quantity of H 2 S released

  2. The neutron capture cross section of the ${s}$-process branch point isotope $^{63}$Ni

    CERN Multimedia

    Neutron capture nucleosynthesis in massive stars plays an important role in Galactic chemical evolution as well as for the analysis of abundance patterns in very old metal-poor halo stars. The so-called weak ${s}$-process component, which is responsible for most of the ${s}$ abundances between Fe and Sr, turned out to be very sensitive to the stellar neutron capture cross sections in this mass region and, in particular, of isotopes near the seed distribution around Fe. In this context, the unstable isotope $^{63}$Ni is of particular interest because it represents the first branching point in the reaction path of the ${s}$-process. We propose to measure this cross section at n_TOF from thermal energies up to 500 keV, covering the entire range of astrophysical interest. These data are needed to replace uncertain theoretical predicitons by first experimental information to understand the consequences of the $^{63}$Ni branching for the abundance pattern of the subsequent isotopes, especially for $^{63}$Cu and $^{...

  3. Childhood Adversity and Men’s Relationships in Adulthood: Life Course Processes and Racial Disadvantage

    Science.gov (United States)

    Thomeer, Mieke Beth; Williams, Kristi; Thomas, Patricia A.; Liu, Hui

    2016-01-01

    Objectives: Prior U.S. population studies have found that childhood adversity influences the quality of relationships in adulthood, with emerging research suggesting that this association might be especially strong for black men. We theorize psychosocial and behavioral coping responses to early life adversity and how these responses may link early life adversity to strain in men’s relationships with their indeterminate partners and children across the life course, with attention to possible racial variation in these experiences and implications for later life well-being. Method: We analyze in-depth interviews with 15 black men and 15 white men. We use qualitative analysis techniques to connect childhood experiences to psychosocial processes in childhood and behavioral coping strategies associated with relationship experiences throughout adulthood. Results: Black men describe much stronger and more persistent childhood adversity than do white men. Findings further suggest that childhood adversity contributes to psychosocial processes (e.g., diminished sense of mastery) that may lead to ways of coping with adversity (e.g., self-medication) that are likely to contribute to relationship difficulties throughout the life span. Discussion: A life course perspective directs attention to the early life origins of cumulative patterns of social disadvantage, patterns that extend to later life. Our findings suggest psychosocial and behavioral pathways through which early life adversity may constrain and strain men’s relationships, possibly contributing to racial inequality in family relationships across the life span. PMID:26589348

  4. Astrophysical site(s of r-process elements in galactic chemodynamical evolution model

    Directory of Open Access Journals (Sweden)

    Hirai Yutaka

    2016-01-01

    Full Text Available Astrophysical site(s of rapid neutron-capture process (r-process is (are not identified yet. Although core-collapse supernovae have been regarded as one of the possible candidates of the astrophysical site of r-process, nucleosynthesis studies suggest that serious difficulties in core-collapse supernovae to produce heavy elements with mass number of ≳110. Recent studies show that neutron star mergers (NSMs can synthesize these elements due to their neutron rich environment. Some chemical evolution studies of the Milky Way halo, however, hardly reproduce the observed star-to-star scatters of the abundance ratios of r-process elements (e.g., Eu in extremely metal-poor stars. This is because of their low rate (∼ 10−4 yr−1 for a Milky Way size galaxy and long merger time (≳ 100 Myr. This problem might be solved if the stars in the Galactic halo are consisted of the stars formed in dwarf galaxies where the star formation efficiencies were very low. In this study, we carry out numerical simulations of galactic chemo-dynamical evolution using an N-body/smoothed particle hydrodynamics code. We construct detailed chemo-dynamical evolution model for the Local Group dwarf spheroidal galaxies (dSphs assuming that the NSMs are the major source of r-process elements. Our models successfully reproduce the observed dispersion in [Eu/Fe] as a function of [Fe/H] if we set merger time of NSMs, ≲ 300 Myr with the Galactic NSM rate of ∼ 10−4 yr−1. In addition, our results are consistent with the observed metallicity distribution of dSphs. In the early phase (≲1 Gyr of galaxy evolution is constant due to low star formation efficiency of dSphs. This study supports the idea that NSMs are the major site of r-process nucleosynthesis.

  5. The costs of seasonality and expansion in Ireland’s milk production and processing

    Directory of Open Access Journals (Sweden)

    Heinschink K.

    2016-12-01

    Full Text Available Ireland’s milk production sector relies on grass-based spring-calving systems, which facilitates cost advantages in milk production but entails a high degree of supply seasonality. Among other implications, this supply seasonality involves extra costs in the processing sector including elevated plant capacities and varying levels of resource utilisation throughout the year. If both the national raw milk production increased substantially (e.g. post-milk quota and a high degree of seasonality persisted, extra processing capacities would be required to cope with peak supplies. Alternatively, existing capacities could be used more efficiently by distributing the milk volume more evenly during the year. In this analysis, an optimisation model was applied to analyse the costs and economies arising to an average Irish milk-processing business due to changes to the monthly distribution of milk deliveries and/or the total annual milk pool. Of the situations examined, changing from a seasonal supply prior to expansion to a smoother pattern combined with an increased milk pool emerged as the most beneficial option to the processor because both the processor’s gross surplus and the marginal producer milk price increased. In practice, it may however be the case that the extra costs arising to the producer from smoothing the milk intake distribution exceed the processor’s benefit. The interlinkages between the stages of the dairy supply chain mean that nationally, the seasonality trade-offs are complex and equivocal. Moreover, the prospective financial implications of such strategies will be dependent on the evolving and uncertain nature of international dairy markets in the post-quota environment.

  6. Toward High-Efficiency Solution-Processed Planar Heterojunction Sb2S3 Solar Cells.

    Science.gov (United States)

    Zimmermann, Eugen; Pfadler, Thomas; Kalb, Julian; Dorman, James A; Sommer, Daniel; Hahn, Giso; Weickert, Jonas; Schmidt-Mende, Lukas

    2015-05-01

    Low-cost hybrid solar cells have made tremendous steps forward during the past decade owing to the implementation of extremely thin inorganic coatings as absorber layers, typically in combination with organic hole transporters. Using only extremely thin films of these absorbers reduces the requirement of single crystalline high-quality materials and paves the way for low-cost solution processing compatible with roll-to-roll fabrication processes. To date, the most efficient absorber material, except for the recently introduced organic-inorganic lead halide perovskites, has been Sb 2 S 3 , which can be implemented in hybrid photovoltaics using a simple chemical bath deposition. Current high-efficiency Sb 2 S 3 devices utilize absorber coatings on nanostructured TiO 2 electrodes in combination with polymeric hole transporters. This geometry has so far been the state of the art, even though flat junction devices would be conceptually simpler with the additional potential of higher open circuit voltages due to reduced charge carrier recombination. Besides, the role of the hole transporter is not completely clarified yet. In particular, additional photocurrent contribution from the polymers has not been directly shown, which points toward detrimental parasitic light absorption in the polymers. This study presents a fine-tuned chemical bath deposition method that allows fabricating solution-processed low-cost flat junction Sb 2 S 3 solar cells with the highest open circuit voltage reported so far for chemical bath devices and efficiencies exceeding 4%. Characterization of back-illuminated solar cells in combination with transfer matrix-based simulations further allows to address the issue of absorption losses in the hole transport material and outline a pathway toward more efficient future devices.

  7. Features of development process displacement of earth’s surface when dredging coal in Eastern Donbas

    Science.gov (United States)

    Posylniy, Yu V.; Versilov, S. O.; Shurygin, D. N.; Kalinchenko, V. M.

    2017-10-01

    The results of studies of the process of the earth’s surface displacement due to the influence of the adjacent longwalls are presented. It is established that the actual distributions of soil subsidence in the fall and revolt of the reservoir with the same boundary settlement processes differ both from each other and by the distribution of subsidence, recommended by the rules of structures protection. The application of the new boundary criteria - the relative subsidence of 0.03 - allows one to go from two distributions to one distribution, which is also different from the sedimentation distribution of protection rules. The use of a new geometrical element - a virtual point of the mould - allows one to transform the actual distribution of subsidence in the model distribution of rules of constructions protection. When transforming the curves of subsidence, the boundary points vary and, consequently, the boundary corners do.

  8. Carbon steel protection in G.S. (Girlder sulfide) plants. CITROSOLV process influence. Pt. 6

    International Nuclear Information System (INIS)

    Lires, O.A.; Burkart, A.L.; Delfino, C.A.; Rojo, E.A.

    1988-01-01

    In order to protect carbon steel towers and piping of Girlder sulfide (G.S.) experimental heavy water plants against corrosion produced by the action of aqueous solutions of hydrogen sulfides, a method, previously published, was developed. Carbon steel, exposed to saturated aqueous solutions of hydrogen sulfide, forms iron sulfide scales. In oxygen free solutions evolution of corrosion follows the sequence: mackinawite → cubic ferrous sulfide → troilite → pyrrotite → pyrite. Scales formed by pyrrotite-pyrite or pyrite are the most protective layers (these are obtained at 130 deg C, 2 MPa, for periods of 14 days). CITROSOLV Process (Pfizer) is used to descaling and passivating stainless steel plant's components. This process must be used in mixed (carbon steel - stainless steel) circuits and may cause the formation of magnetite scales over the carbon steel. The influence of magnetite in the pyrrotite-pyrite scales formation is studied in this work. (Author) [es

  9. Canada's deep geological repository for used nuclear fuel - the geoscientific site evaluation process

    Energy Technology Data Exchange (ETDEWEB)

    Belfadhel, M.B.; Blyth, A.; Desroches, A.; Hirschorn, S.; Mckelvie, J.; Sanchez-Rico Castejon, M.; Parmenter, A.; Urrutia-Bustos, A.; Vorauer, A., E-mail: mbenbelfadhel@nwmo.ca [Nuclear Waste Management Organization, Toronto, ON (Canada)

    2014-07-01

    The Nuclear Waste Management Organization (NWMO) is responsible for implementing Adaptive Phased Management (APM), the approach selected by the Government of Canada for the long-term management of used nuclear fuel generated by Canadian nuclear reactors. The ultimate objective of APM is the centralized containment and isolation of Canada's used nuclear fuel in a Deep Geological Repository in a suitable crystalline or sedimentary rock formation. In May 2010, the NWMO initiated a nine-step site selection process to find an informed and willing community to host the project. This paper describes the approach, methods and criteria being used to assess the geoscientific suitability of communities currently involved in the site selection process. The social, cultural and economic aspects of the assessment are discussed in a companion paper. (author)

  10. Limited ability driven phase transitions in the coevolution process in Axelrod's model

    Energy Technology Data Exchange (ETDEWEB)

    Wang Bing [ERATO Aihara Complexity Modelling Project, JST, Institute of Industrial Science, University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8505 (Japan); Institute of Industrial Science, University of Tokyo, Tokyo (Japan)], E-mail: bingbignmath@gmail.com; Han Yuexing [Graduate School of Information System, University of Electro-Communications, 1-5-1 Chofugaoka, Chofu-Shi, Tokyo (Japan); Chen Luonan [Department of Electrical Engineering and Electronics, Osaka Sangyo University, Daito, Osaka 574-8530 (Japan); Aihara, Kazuyuki [ERATO Aihara Complexity Modelling Project, JST, Institute of Industrial Science, University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8505 (Japan); Institute of Industrial Science, University of Tokyo, Tokyo (Japan)

    2009-04-13

    We study the coevolution process in Axelrod's model by taking into account of agents' abilities to access information, which is described by a parameter {alpha} to control the geographical range of communication. We observe two kinds of phase transitions in both cultural domains and network fragments, which depend on the parameter {alpha}. By simulation, we find that not all rewiring processes pervade the dissemination of culture, that is, a very limited ability to access information constrains the cultural dissemination, while an exceptional ability to access information aids the dissemination of culture. Furthermore, by analyzing the network characteristics at the frozen states, we find that there exists a stage at which the network develops to be a small-world network with community structures.

  11. Investigation of photoelectronic processes in CdIn2S4 by photoinduced current transient spectroscopy

    International Nuclear Information System (INIS)

    Serpi, A.

    1986-01-01

    Photoelectronic processes in CdIn 2 S 4 are investigated by four-gate photoinduced current transient spectroscopy. In general the photocurrent decay transients are non-exponential because of a nonlinear multichannel recombination mechanism. Nevertheless suitable extrinsic excitation allows to open one recombination channel only and so to evidence a purely exponential relaxation. The detailed analysis of this process leads to the interpretation that the defects associated with the energy levels continuously distributed below the conduction band act as relay centres for radiative recombination of photoelectrons rather than as thermal emitting traps. An electron trapping level located at about 0.6 eV from the bottom of the conduction band is also evidenced. (author)

  12. Training processes in under 6s football competition: The transition from ingenuity to institutionalization

    Directory of Open Access Journals (Sweden)

    Abel Merino Orozco

    2016-12-01

    Full Text Available Under 6s football competition is a school sport that has inherent educational implications. Moreover, it is a booming non-formal socio-educational framework where families and children lay training expectations and dreams. The aim is to comprehend the emerging learning processes promoted in this environment for 6 years-old children, when the child starts the institutionalization process in the ruled sport. The research uses a case study design, the ethnographic mode, through participant observation. It uses the narrative and image data to understand the scenario from the perspective of its builder. The results show that the institutionalization process starts from the ingenuity and lack of understanding of the child, who develops training processes in a prescriptive environment, where the competitive performance of the team is pursued. Promoting certain types of learning which the participant himself consciously considers inappropriate undertakes the presence of different kinds of behaviour, which go against the positive values usually attributed to football. The study claims for the necessity of taking advantage of the training opportunities which football offers to children such as the enhancing of creativity, self-efficacy and self-esteem.

  13. Thabo Mbeki’s Role in the Conflict Resolution Process in Darfur

    Directory of Open Access Journals (Sweden)

    Deffo Rowllings Tafotie

    2015-12-01

    Full Text Available The article considers activities of the former South African president Thabo Mbeki in the conflict resolution in Darfur (Sudan. Since 2009, the members of the African Union High Implementation Panel have played a key role in peace process in Sudan. This team under the leadership of Thabo Mbeki contributed to preparations for the presidential election in Sudan in 2010, as well as led the warring parties to the agreement on the security regime in the border zone. Particular attention is given to Mbeki’s mediation in establishing a dialogue between the rebels and the government of Sudan and to his diplomatic mission aimed at normalization of relations between Chad and Sudan. The article defines his role in reaching a peace agreement between Chad and Sudan in 2010 and signing of peace agreements in Doha between the government and rebel groups in 2011. The article analyses the difficulties of Thabo Mbeki’s mission in conflict resolution in Darfur.

  14. Certification of U.S. instrumentation in Russian nuclear processing facilities

    International Nuclear Information System (INIS)

    Powell, D.H.; Sumner, J.N.

    2000-01-01

    Agreements between the United States (U.S.) and the Russian Federation (R.F.) require the down-blending of highly enriched uranium (HEU) from dismantled Russian Federation nuclear weapons. The Blend Down Monitoring System (BDMS) was jointly developed by the Los Alamos National Laboratory (LANL) and the Oak Ridge National Laboratory (ORNL) to continuously monitor the enrichments and flow rates in the HEU blending operations at the R.F. facilities. A significant requirement of the implementation of the BDMS equipment in R.F. facilities concerned the certification of the BDMS equipment for use in a Russian nuclear facility. This paper discusses the certification of the BDMS for installation in R.F. facilities, and summarizes the lessons learned from the process that can be applied to the installation of other U.S. equipment in Russian nuclear facilities

  15. Modelling phosphorus (P), sulphur (S) and iron (Fe) interactions during the simulation of anaerobic digestion processes

    DEFF Research Database (Denmark)

    Flores-Alsina, Xavier; Solon, Kimberly; Kazadi-Mbamba, Christian

    2015-01-01

    This paper examines the effects of different model formulations when describing sludge stabilization processes in wastewater treatment plants by the Anaerobic Digestion Model No. 1 (ADM1). The proposed model extensions describe the interactions amongst phosphorus (P), sulfur (S), iron (Fe......) and their potential effect on total biogas production (CO2, CH4, H2 and H2S). The ADM1 version, implemented in the plant-wide context provided by the Benchmark Simulation Model No. 2 (BSM2), is used as the basic platform (A0). Four (A1 – A4) different model extensions are implemented, simulated and evaluated......2) as the electron donor. Finally, the last evaluated approach (A4) is based on accounting for Multiple Mineral Precipitation. The ADM1 thereby switches from a 2-phase (aqueous-gas) to a 3-phase (aqueous-gas-solid) system. Simulation results show that the implementations of A1 and A2 lead...

  16. Work continues on Destiny, the U.S. Lab module, in the Space Station Processing Facility

    Science.gov (United States)

    1999-01-01

    In the Space Station Processing Facility (SSPF), work continues on the U.S. Lab module, Destiny, which is scheduled to be launched on Space Shuttle Endeavour in early 2000. It will become the centerpiece of scientific research on the International Space Station. Destiny shares space in the SSPF with the Shuttle Radar Topography Mission (SRTM) and Leonardo, the Multipurpose Logistics Module (MPLM) built by the Agenzia Spaziale Italiana (ASI). The SRTM is targeted for launch on mission STS-99 in September 1999. Leonardo is scheduled to launch on mission STS- 102 in June 2000.

  17. R.E.S.E.X. A computer simulation program for rare earth separation processes

    International Nuclear Information System (INIS)

    Casarci, M.; Gasparini, G.M.; Sanfilippo, L; Pozio, A.

    1996-01-01

    Lanthanides are most commonly separated using complex solvent extraction circuits. A simulation code has been developed by E.N.E.A. called R.E.S.E.X. (Rare Earth Solvent Extraction) which is able to simulate a solvent extraction battery up to 200 stages, using different configurations. The contemporary utilisation of an equilibrium data bank and of a simulation code allows the theoretical study of new rare earth separative processes or the optimisation of existing ones. As an example of this strategy are reported the results of the Pr/Nd separation in TBP 50 % in aromatic solvent

  18. Decommissioning of evaporation technology for processing liquid radioactive waste in UJV Rez, a. s

    International Nuclear Information System (INIS)

    Tous, M.; Otcovsky, T.; Podlaha, J.

    2015-01-01

    The UJV Rez, a. s. is the main leader in processing institutional radioactive waste (RAW) in the Czech Republic and the Waste Management Department has been established since the research reactor VVR-S (now LVR-15) was put in operation. Due to the large activities in nuclear research and engineering in the past, a big capacity of waste management technologies was needed. The low pressure compactor for volume reduction of solid RAW, as well as chemical pre-treatment technology of liquid RAW were installed and later the evaporation technology for effective processing the liquid RAW with the cementation and bituminization unit for final conditioning of concentrated liquid RAW were used. During the years of research reactor operation and research activities in UJV Rez, a. s. there were two installed evaporation technologies in row. After the latest evaporator lifetime, changes in liquid RAW production and together with higher decontamination factor requirements, this technology was decided to be decommissioned. The decommissioned evaporation technology was installed and put in operation in 1991. This technology was used for processing liquid aqueous RAW produced from internal research activities and of course for external producers and institutions (e.g. universities, medicine, research institutes, industry). The approved decommissioning plan was prepared and the licence for immediate decommissioning was obtained in 2012. Then the decommissioning project started. The preparing stages as dosimetric survey, expected material balance and of course initial decontamination activities were performed. Evaporation technology dismantling and processing the arising RAW were done by the internal staff of Waste Management Department. The total volume of produced RAW was 49,5 m 3 of RAW. The secondary liquid RAW (from decontamination) of amount 1,4 m 3 , contaminated sludge of amount 0,5 m 3 , solid RAW (construction steel) of amount 39,1 m 3 , solid compressible RAW (protective

  19. Development of Embodied Word Meanings: Sensorimotor Effects in Children’s Lexical Processing

    Directory of Open Access Journals (Sweden)

    Michelle eInkster

    2016-03-01

    Full Text Available Previous research showed an effect of words’ rated body-object interaction (BOI in children’s visual word naming performance, but only in children 8 years of age or older (Wellsby & Pexman, 2014a. In that study, however, BOI was established using adult ratings. Here we collected ratings from a group of parents for children’s body-object interaction experience (child-BOI. We examined effects of words’ child-BOI and also words’ imageability on children’s responses in an auditory word naming task, which is suited to the lexical processing skills of younger children. We tested a group of 54 children aged 6-7 years and a comparison group of 25 adults. Results showed significant effects of both imageability and child-BOI on children’s auditory naming latencies. These results provide evidence that children younger than 8 years of age have richer semantic representations for high imageability and high child-BOI words, consistent with an embodied account of word meaning.

  20. A Study of the Air Force’s Exception Management Process: Its Effect on Customer Service and Order Processing

    Science.gov (United States)

    1991-09-01

    The purpose of this study was two-fold; the first goal was to determine what the SBSS order processing is, and secondly to determine the effect the...current method of ECC management has on the SBSS order processing cycle and the level of customer service rendered by base supply. The research...revealed that exception management is a crucial component of a successful order processing function. Further, it was established that the level of customer

  1. Recruiting Faculty Leaders at U.S. Medical Schools: A Process Without Improvement?

    Science.gov (United States)

    Marsh, James D; Chod, Ronald

    2017-11-01

    Recruiting faculty leaders to work in colleges of medicine is a ubiquitous, time-consuming, costly activity. Little quantitative information is available about contemporary leadership recruiting processes and outcomes. In this article, the authors examine current recruiting methods and outcomes in colleges of medicine and compare academic search approaches with the approaches often employed in intellectual-capital-rich industries.In 2015, the authors surveyed chairs of internal medicine at U.S. medical schools regarding their recruiting practices and outcomes-specifically their selection methods, the duration of searches, the recruitment of women and minorities underrepresented in medicine (URM), and their satisfaction with search outcomes.The authors found that department chairs were extensively engaged in numerous searches for leaders. The recruitment process most commonly required 7 to 12 months from initiation to signed contract. Interestingly, longer searches (19+ months) were much more frequently associated with a recruitment outcome that chairs viewed as unsatisfactory or very unsatisfactory. Most leadership searches produced very few women and URM finalists. The biggest perceived hurdles to successful recruitment were the need to relocate the candidate and family and the shortage of good candidates.The process of recruiting leaders in academic medicine has changed little in more than 25 years. Process improvement is important and should entail carefully structured search processes, including both an overhaul of search committees and further emphasis on leadership development within the college of medicine. The authors propose specific steps to enhance recruitment of members of URM groups and women to leadership positions in academic medicine.

  2. Rotational mixing in carbon-enhanced metal-poor stars with s-process enrichment

    Science.gov (United States)

    Matrozis, E.; Stancliffe, R. J.

    2017-10-01

    Carbon-enhanced metal-poor (CEMP) stars with s-process enrichment (CEMP-s) are believed to be the products of mass transfer from an asymptotic giant branch (AGB) companion, which has long since become a white dwarf. The surface abundances of CEMP-s stars are thus commonly assumed to reflect the nucleosynthesis output of the first AGB stars. We have previously shown that, for this to be the case, some physical mechanism must counter atomic diffusion (gravitational settling and radiative levitation) in these nearly fully radiative stars, which otherwise leads to surface abundance anomalies clearly inconsistent with observations. Here we take into account angular momentum accretion by these stars. We compute in detail the evolution of typical CEMP-s stars from the zero-age main sequence, through the mass accretion, and up the red giant branch for a wide range of specific angular momentum ja of the accreted material, corresponding to surface rotation velocities, vrot, between about 0.3 and 300 kms-1. We find that only for ja ≳ 1017 cm2s-1 (vrot > 20 kms-1, depending on mass accreted) angular momentum accretion directly causes chemical dilution of the accreted material. This could nevertheless be relevant to CEMP-s stars, which are observed to rotate more slowly, if they undergo continuous angular momentum loss akin to solar-like stars. In models with rotation velocities characteristic of CEMP-s stars, rotational mixing primarily serves to inhibit atomic diffusion, such that the maximal surface abundance variations (with respect to the composition of the accreted material) prior to first dredge-up remain within about 0.4 dex without thermohaline mixing or about 0.5-1.5 dex with thermohaline mixing. Even in models with the lowest rotation velocities (vrot ≲ 1 kms-1), rotational mixing is able to severely inhibit atomic diffusion, compared to non-rotating models. We thus conclude that it offers a natural solution to the problem posed by atomic diffusion and cannot be

  3. Neutron capture at the s-process branching points $^{171}$Tm and $^{204}$Tl

    CERN Multimedia

    Branching points in the s-process are very special isotopes for which there is a competition between the neutron capture and the subsequent b-decay chain producing the heavy elements beyond Fe. Typically, the knowledge on the associated capture cross sections is very poor due to the difficulty in obtaining enough material of these radioactive isotopes and to measure the cross section of a sample with an intrinsic activity; indeed only 2 out o the 21 ${s}$-process branching points have ever been measured by using the time-of-flight method. In this experiment we aim at measuring for the first time the capture cross sections of $^{171}$Tm and $^{204}$Tl, both of crucial importance for understanding the nucleosynthesis of heavy elements in AGB stars. The combination of both (n,$\\gamma$) measurements on $^{171}$Tm and $^{204}$Tl will allow one to accurately constrain neutron density and the strength of the 13C(α,n) source in low mass AGB stars. Additionally, the cross section of $^{204}$Tl is also of cosmo-chrono...

  4. Effects of the impurity-host interactions on the nonradiative processes in ZnS:Cr

    Science.gov (United States)

    Tablero, C.

    2010-11-01

    There is a great deal of controversy about whether the behavior of an intermediate band in the gap of semiconductors is similar or not to the deep-gap levels. It can have significant consequences, for example, on the nonradiative recombination. In order to analyze the behavior of an intermediate band, we have considered the effect of the inward and outward displacements corresponding to breathing and longitudinal modes of Cr-doped ZnS and on the charge density for different processes involved in the nonradiative recombination using first-principles. This metal-doped zinc chalcogenide has a partially filled band within the host semiconductor gap. In contrast to the properties exhibited by deep-gap levels in other systems, we find small variations in the equilibrium configurations, forces, and electronic density around the Cr when the nonradiative recombination mechanisms modify the intermediate band charge. The charge density around the impurity is equilibrated in response to the perturbations in the equilibrium nuclear configuration and the charge of the intermediate band. The equilibration follows a Le Chatelier principle through the modification of the contribution from the impurity to the intermediate band and to the valence band. The intermediate band introduced by Cr in ZnS for the concentrations analyzed makes the electronic capture difficult and later multiphonon emission in the charge-transfer processes, in accordance with experimental results.

  5. Neutron capture in 122,123,124Te: A critical test for s-process studies

    International Nuclear Information System (INIS)

    Wisshak, K.; Voss, F.; Kaeppeler, F.; Reffo, G.

    1991-11-01

    The neutron capture cross sections of 122,123,124,125,126 Te were measured in the energy range from 10 to 200 keV at the Karlsruhe Van de Graaff accelerator using gold as a standard. Neutrons were produced via the 7 Li(p,n) 7 Be reaction by bombarding metallic Li targets with a pulsed proton beam. Capture events were registered with the Karlsruhe 4π Barium Fluoride Detector. Several runs have been performed under different experimental conditions to study the systematic uncertainties in detail. The cross section ratios were determined with an overall uncertainty of ∝ 1%. This is an improvement by about a factor of five compared to the existing data. Maxwellian averaged neutron capture cross sections were calculated for thermal energies between kT=10 and 100 keV by normalizing the cross section shape up to 600 keV neutron energy reported in literature to the present data. These stellar cross sections were used in an s-process analysis. With the classical approach the abundances of the three s-only isotopes 122,123,124 Te could be reproduced within the experimental uncertainties of ∝ 1%. The accuracy of the present data allowed also to derive constraints for the existing stellar models with respect to the effective neutron density. Furthermore, the p-process abundances for the tellurium isotopes are discussed. (orig.) [de

  6. Change rules of a stratospheric airship’s envelope shape during ascent process

    Directory of Open Access Journals (Sweden)

    Shuai Zhao

    2017-04-01

    Full Text Available Stratospheric airship is a special near-space air vehicle, and has more advantages than other air vehicles, such as long endurance, strong survival ability, excellent resolution, low cost, and so on, which make it an ideal stratospheric platform. It is of great significance to choose a reasonable and effective way to launch a stratospheric airship to the space for both academic research and engineering applications. In this paper, the non-forming launch way is studied and the method of differential pressure gradient is used to study the change rules of the airship’s envelope shape during the ascent process. Numerical simulation results show that the head of the envelope will maintain the inflatable shape and the envelope under the zero-pressure level will be compressed into a wide range of wrinkles during the ascent process. The airship’s envelope will expand with the ascent of the airship and the position of the zero-pressure level will move downward constantly. At the same time, the envelope will gradually form a certain degree of stiffness under the action of the inner and external differential pressure. The experimental results agree well with the analytical results, which shows that the non-forming launch way is effective and reliable, and the analytical method has exactness and feasibility.

  7. Gas processing developments in the U.S. and their relevance to the Canadian market

    International Nuclear Information System (INIS)

    Williams, K.L.

    1999-01-01

    The underlying issues which have been responsible for the changes in the natural gas processing industry in the U.S. for the past 10 years are discussed. The objective of this paper is compare trends in the U.S. with the evolving midstream industry in western Canada and to emphasize the striking similarities. The positive impacts that price regulation and deregulation had on midstream companies are described. Another boost to midstream function was provided when FERC issued approving orders granting pipeline companies the ability to spin-down their gathering and processing assets into non-federally regulated companies. The need for exploration and production companies to sustain capital spending, focus on core business activities and streamline the balance sheet to maximize value in the stock market, have driven many recent US midstream transactions. The formation of independent midstream start-up companies, capital deployment into midstream assets by Canadian transmission companies and interest shown by US midstream companies in Canadian midstream assets suggests that a similar evolution is under way in Canada. Formation of a Canadian midstream industry is well underway, and should fully materialize in the next decade. Major US midstream transactions over the past five years are briefly summarized to illustrate the growing confidence in independent midstream companies to provide reliable and cost-effective midstream services

  8. The Bologna Process of German’s Media and Communication Studies

    Directory of Open Access Journals (Sweden)

    Yoseph Bambang Wiratmojo

    2017-01-01

    Full Text Available Internationalization of the higher education system through the Bologna Process in German’s media and communication studies is on progress; all higher education institutions were chosen as the samples in this research had the same opinion that international student’s mobility in term of the Bologna Process was the most important variable to create international cooperation with other universities. Providing more courses in English also became their main concern to attract international students come their academic life. The implementation of the new curricula model, bachelor and masters, was considered more transparent and clearer in the structure and content than the Diplom and Magister models. Nevertheless, the compatible and comparable qualification principle of bachelor and masters structure brought also dilemma that some of the content of media and communication studies had to be adjusted considering the workload and study period that is different from the old curricula systems. The bachelor and masters structure caused apprehension that the bachelor graduates would prefer to work in industries than return to campus to pursue higher degree. This research was based on content analysis of curricula documents and interview transcription of some representative of HEI in media and communication studies.

  9. Comparison of thermal scattering processing options for S(α,β) cards in MCNP

    International Nuclear Information System (INIS)

    Čerba, Štefan; Damian, Jose Ignacio Marquez; Lüley, Jakub; Vrban, Branislav; Farkas, Gabriel; Nečas, Vladimír; Haščík, Jan

    2013-01-01

    Highlights: ► Determination of MCNP calculation bias for WWER-440. ► Specific scattering law S(α,β). ► Benchmark cases investigated. ► Three methods to process material cards for hydrogen bound in light water. - Abstract: The MCNP distributions include sets of pre-calculated thermal scattering libraries but these libraries are available for several temperature steps only. In order to achieve reliable results it is suitable to process the cross section libraries for the desired temperature. In general, there are three methods to process these thermal scattering libraries for the desired temperatures. This paper deals with the comparison of these three methods on the basis of several benchmarks and on the basis of a thermal transient experiment of a WWER-440 reactor. The choice is up to the MCNP user but unfortunately very few studies concerning the comparison have been published so far. Therefore conclusions and results presented in this paper may help the user to choose the most appropriate method for his calculation

  10. Abnormal Thiamine-Dependent Processes in Alzheimer’s Disease. Lessons from Diabetes

    Science.gov (United States)

    Gibson, Gary E.; Hirsch, Joseph A.; Cirio, Rosanna T.; Jordan, Barry D.; Fonzetti, Pasquale; Elder, Jessica

    2013-01-01

    Reduced glucose metabolism is an invariant feature of Alzheimer’s Disease (AD) and an outstanding biomarker of disease progression. Glucose metabolism may be an attractive therapeutic target, whether the decline initiates AD pathophysiology or is a critical component of a cascade. The cause of cerebral regional glucose hypometabolism remains unclear. Thiamine-dependent processes are critical in glucose metabolism and are diminished in brains of AD patients at autopsy. Further, the reductions in thiamine-dependent processes are highly correlated to the decline in clinical dementia rating scales. In animal models, thiamine deficiency exacerbates plaque formation, promotes phosphorylation of tau and impairs memory. In contrast, treatment of mouse models of AD with the thiamine derivative benfotiamine diminishes plaques, decreases phosphorylation of tau and reverses memory deficits. Diabetes predisposes to AD, which suggests they may share some common mechanisms. Benfotiamine diminishes peripheral neuropathy in diabetic humans and animals. In diabetes, benfotiamine induces key thiamine-dependent enzymes of the pentose shunt to reduce accumulation of toxic metabolites including advanced glycation end products (AGE). Related mechanisms may lead to reversal of plaque formation by benfotiamine in animals. If so, the use of benfotiamine could provide a safe intervention to reverse biological and clinical processes of AD progression. PMID:22982063

  11. Development of the NRC`s Human Performance Investigation Process (HPIP). Volume 2, Investigators`s Manual

    Energy Technology Data Exchange (ETDEWEB)

    Paradies, M.; Unger, L. [System Improvements, Inc., Knoxville, TN (United States); Haas, P.; Terranova, M. [Concord Associates, Inc., Knoxville, TN (United States)

    1993-10-01

    The three volumes of this report detail a standard investigation process for use by US Nuclear Regulatory Commission (NRC) personnel when investigating human performance related events at nuclear power plants. The process, called the Human Performance Investigation Process (HPIP), was developed to meet the special needs of NRC personnel, especially NRC resident and regional inspectors. HPIP is a systematic investigation process combining current procedures and field practices, expert experience, NRC human performance research, and applicable investigation techniques. The process is easy to learn and helps NRC personnel perform better field investigations of the root causes of human performance problems. The human performance data gathered through such investigations provides a better understanding of the human performance issues that cause event at nuclear power plants. This document, Volume II, is a field manual for use by investigators when performing event investigations. Volume II includes the HPIP Procedure, the HPIP Modules, and Appendices that provide extensive documentation of each investigation technique.

  12. Comparing Germany's and California's Interconnection Processes for PV Systems (White Paper)

    Energy Technology Data Exchange (ETDEWEB)

    Tweedie, A.; Doris, E.

    2011-07-01

    Establishing interconnection to the grid is a recognized barrier to the deployment of distributed energy generation. This report compares interconnection processes for photovoltaic projects in California and Germany. This report summarizes the steps of the interconnection process for developers and utilities, the average length of time utilities take to process applications, and paperwork required of project developers. Based on a review of the available literature, this report finds that while the interconnection procedures and timelines are similar in California and Germany, differences in the legal and regulatory frameworks are substantial.

  13. Processing and analysis of commercial satellite image data of the nuclear accident near Chernobyl, U.S.S.R

    International Nuclear Information System (INIS)

    Sadowski, F.G.; Covington, S.J.

    1987-01-01

    Advanced digital processing techniques were applied to Landsat-5 Thematic Mapper (TM) data and SPOT high-resolution visible (HRV) panchromatic data to maximize the utility of images of a nuclear power plant emergency at Chernobyl in the Soviet Ukraine. The results of the data processing and analysis illustrate the spectral and spatial capabilities of the two sensor systems and provide information about the severity and duration of the events occurring at the power plant site

  14. Pacific Northwest National Laboratory’s Climate Resiliency Planning Process and Lessons Learned

    Energy Technology Data Exchange (ETDEWEB)

    Fowler, Kimberly M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Judd, Kathleen S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Brandenberger, Jill M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-02-22

    In 2015, the Pacific Northwest National Laboratory (PNNL) developed its first Climate Resilience Plan for its Richland Campus. PNNL has performed Climate Resilience Planning for the Department of Defense, Nuclear Regulatory Commission, and Department of Energy (DOE) over the past 5 years. The assessment team included climate scientists, social scientists, engineers, and operations managers. A multi-disciplinary team was needed to understand the potential exposures to future changes at the site, the state of the science on future impacts, and the best process for “mainstreaming” new actions into existing activities. The team uncovered that the site’s greatest vulnerabilities, and therefore priorities for climate resilience planning, are high temperature due to degraded infrastructure, increased wildfire frequency, and intense precipitation impacts on stormwater conveyance systems.

  15. Tritium Facilities Modernization and Consolidation Project Process Waste Assessment (Project S-7726)

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, R.H. [Westinghouse Savannah River Company, AIKEN, SC (United States); Oji, L.N.

    1997-11-14

    Under the Tritium Facility Modernization {ampersand} Consolidation (TFM{ampersand}C) Project (S-7726) at the Savannah River Site (SS), all tritium processing operations in Building 232-H, with the exception of extraction and obsolete/abandoned systems, will be reestablished in Building 233-H. These operations include hydrogen isotopic separation, loading and unloading of tritium shipping and storage containers, tritium recovery from zeolite beds, and stripping of nitrogen flush gas to remove tritium prior to stack discharge. The scope of the TFM{ampersand}C Project also provides for a new replacement R&D tritium test manifold in 233-H, upgrading of the 233- H Purge Stripper and 233-H/234-H building HVAC, a new 234-H motor control center equipment building and relocating 232-H Materials Test Facility metallurgical laboratories (met labs), flow tester and life storage program environment chambers to 234-H.

  16. Simon`s Puzzle: Heuristics in the Process of Making Political Choices

    Directory of Open Access Journals (Sweden)

    Mateusz Wajzer

    2014-07-01

    Full Text Available In this article we analyse one of the most fascinating paradoxes of mass politics. Based on the data from the studies of neurobiologists, neurologists, social psychology, cognitive and evolution studies we answer the question specified in literature as the Simon’s puzzle: How is it possible that citizens have their opinions about politics, if they know so little about it? We began our analysis from the criticism of the economic rationality approach. To do this, we referred to the Allais paradox, cognitive dissonance theory, Ellsberg paradox, the concept of bounded rationality, conjunction fallacy and prospect theory. Next, we described the evolutionary processes shaping the minds of Homo sapiens and characterised cognitive mechanisms, thanks to which people can make political choices, especially in view of the shortage of time and information. The following heuristics are referred to herein: affect, recognition, judgment and imitation.

  17. Tritium Facilities Modernization and Consolidation Project Process Waste Assessment (Project S-7726)

    International Nuclear Information System (INIS)

    Hsu, R.H.; Oji, L.N.

    1997-01-01

    Under the Tritium Facility Modernization ampersand Consolidation (TFM ampersand C) Project (S-7726) at the Savannah River Site (SS), all tritium processing operations in Building 232-H, with the exception of extraction and obsolete/abandoned systems, will be reestablished in Building 233-H. These operations include hydrogen isotopic separation, loading and unloading of tritium shipping and storage containers, tritium recovery from zeolite beds, and stripping of nitrogen flush gas to remove tritium prior to stack discharge. The scope of the TFM ampersand C Project also provides for a new replacement R ampersand D tritium test manifold in 233-H, upgrading of the 233- H Purge Stripper and 233-H/234-H building HVAC, a new 234-H motor control center equipment building and relocating 232-H Materials Test Facility metallurgical laboratories (met labs), flow tester and life storage program environment chambers to 234-H

  18. Detection and processing of phase modulated optical signals at 40 Gbit/s and beyond

    DEFF Research Database (Denmark)

    Geng, Yan

    the amplitude regeneration capability based on FWM in a highly nonlinear fiber (HNLF). The first reported experimental demonstration of amplitude equalization of 40 Gbit/s RZ-DPSK signals using a 500 m long HNLF is presented. Using four possible phase levels to carry the information, DQPSK allows generation......This thesis addresses demodulation in direct detection systems and signal processing of high speed phase modulated signals in future all-optical wavelength division multiplexing (WDM) communication systems where differential phase shift keying (DPSK) or differential quadrature phase shift keying...... (DQPSK) are used to transport information. All-optical network functionalities -such as optical labeling, wavelength conversion and signal regeneration- are experimentally investigated. Direct detection of phase modulated signals requires phase-to-intensity modulation conversion in a demodulator...

  19. The (n, $\\gamma$) reaction in the s-process branching point $^{59}$Ni

    CERN Multimedia

    We propose to measure the $^{59}$Ni(n,$\\gamma$)$^{56}$Fe cross section at the neutron time of flight (n TOF) facility with a dedicated chemical vapor deposition (CVD) diamond detector. The (n, ) reaction in the radioactive $^{59}$Ni is of relevance in nuclear astrophysics as it can be seen as a rst branching point in the astrophysical s-process. Its relevance in nuclear technology is especially related to material embrittlement in stainless steel. There is a strong discrepancy between available experimental data and the evaluated nuclear data les for this isotope. The aim of the measurement is to clarify this disagreement. The clear energy separation of the reaction products of neutron induced reactions in $^{59}$Ni makes it a very suitable candidate for a rst cross section measurement with the CVD diamond detector, which should serve in the future for similar measurements at n_TOF.

  20. The symbiotic star CI Cygni: S-process episode or accretion event

    International Nuclear Information System (INIS)

    Kenyon, S.J.; Webbink, R.F.; Gallagher, J.S.; Truran, J.W.

    1982-01-01

    Evidence that the symbiotic star C I Cygni is an eclipsing binary is reviewed. It is shown that the 's-process episode' described by Audouze et al. (1981) during its 1975 outburst arises from superposition of normal gM4 absorption features on the continuum of the hot component during eclipse ingress, and not to sudden enhancements of rare earth elements. The peculiar velocity displacements of absorption lines with different excitation potentials during this episode are identified as signatures of an optically thick accretion disk, which dominates the visible spectrum during outburst. The data presented by Audouze et al., and the shape of the light curve thus provide evidence that the outburst is accretion-powered. (orig.)

  1. Symbiotic star CI Cygni: S-process episode or accretion event

    Energy Technology Data Exchange (ETDEWEB)

    Kenyon, S J; Webbink, R F; Gallagher, J S; Truran, J W

    1982-02-01

    Evidence that the symbiotic star C I Cygni is an eclipsing binary is reviewed. It is shown that the s-process episode described by Audouze et al. (1981) during its 1975 outburst arises from superposition of normal gM4 absorption features on the continuum of the hot component during eclipse ingress, and not to sudden enhancements of rare earth elements. The peculiar velocity displacements of absorption lines with different excitation potentials during this episode are identified as signatures of an optically thick accretion disk, which dominates the visible spectrum during outburst. The data presented by Audouze et al., and the shape of the light curve thus provide evidence that the outburst is accretion-powered.

  2. Final characterization report for the non-process areas of the 233-S Plutonium Concentration Facility

    International Nuclear Information System (INIS)

    Encke, D.B.; Harris, R.A.

    1997-04-01

    This report addresses the 233-S Plutonium Concentration Facility characterization survey data collected from January 21, 1997 through February 3, 1997. The characterization activities evaluated the radiological status and identified the hazardous materials locations. The scope of this report is limited to the nonprocess areas in the facility, which include the special work permit (SWP) change room, toilet, equipment room, electrical cubicle, control room, and pipe gallery. A portion of the roof (excluding the roof over the process hood and viewing room) was also included. Information in this report will be used to identify waste streams, provide specific chemical and radiological data to aid in planning decontamination and demolition activities, and allow proper disposal of the demolition debris, as required by the Comprehensive Environmental Response, Compensation, and Liability Act of 1980

  3. Remodeling process of the streptozotocln-induced diabetic rat's resected condyle

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Jung Pyo; Kim, Won Cheol; Hwang, Eui Hwan; Lee, Sang Rae [Dept. of Oral and Maxillofacial Radiology, Oral Diagnosis and Oral Medicine, College of Dentistry, Kyung Hee University, Seoul (Korea, Republic of)

    1994-08-15

    The purpose of this study was to investigate the remodeling process of the streptozotocin-induced diabetic rat's resected condyle. The experiment was performed with male Sprague-Dawley strain rats weighing approximately 250 gm, which were rendered diabetic by an intravenous injection of streptozotocin (70 mg/kg body weight). After condylectomy, experimental rats were serially terminated on the 1st week, the 2nd week, the 3rd week, and the 4th week. The following termination, the mandible were dissected out to make specimens. Each mandibular condyle was radiographed with Hitex HA-80 (Hitex Co., Ltd. Japan). In addition to radiographic observation, the mandibular condyles, further decalcified and embedded in paraffin, were sectioned and stained with Hematoxylin and Eosin, Toluidine blue and Masson's trichrome. They were observed with a light microscope and a polarizing microscope. The results were as follows. 1. Soft X-ray radiograms revealed proliferation of bone after 1 week in both groups. Irregularly repaired bones and dense trabeculae were clearly observed in experimental group. 2. The resected condyles were repaired by intramembraneous and endochondral bone formation in both groups. 3. Bone tissue repair was initiated from the adjacent margin of resected bone, and cartilaginous tissues were observed at the top of repaired bone in both groups. 4. The number of osteoblasts of experimental group was small, compared with control group. Each osteoblast was small and flat. The thin trabeculae were irregularly formed. 5. Collagens of bone were gradually matured in both groups but the degree of maturation was lower in experimental group. 6. Fibrous tissues covered the upper parts of repaired bone were densely arranged in the both groups. Conclusively, atrophied osteoblasts, immature collagen of bone, and thin and irregular trabeculae function and caused disturbance of remodeling process of bone.

  4. The policy process in a petro-state. An analysis of PDVSA's (Petroleos de Venezuela SA's) internationalisation strategy

    Energy Technology Data Exchange (ETDEWEB)

    Baena, C.E. [Instituto de Estudios Superiores de Administracion, Caracas (Venezuela)

    1999-07-01

    Venezuela offers a unique case and fertile ground for the study of oil policy-making processes. In the specialised literature very little attention has been paid to the nature and operations of multinationals from developing countries. By analysing Petroleos de Venezuela SA's (PDVSA's) internationalisation policy, this unique book explores the difficulties encountered by a major state oil enterprise in its efforts to grow beyond national borders. This informative study focuses on the impact of democratic bargaining on the process of oil policy-making in Venezuela, stressing the constraints posed by politics on PDVSA's efforts to expand its foreign operations. (author)

  5. The effects of context processing on social cognition impairments in adults with Asperger’s syndrome

    Directory of Open Access Journals (Sweden)

    Sandra eBaez

    2014-09-01

    Full Text Available Social cognition –the basis of all communicative and otherwise interpersonal relationships– is embedded in specific contextual circumstances which shape intrinsic meanings. This domain is compromised in the autism spectrum disorders, including Asperger’s syndrome (AS (DSM-V. However, the few available reports of social cognition skills in adults with AS have largely neglected the effects of contextual factors. Moreover, previous studies on this population have also failed to simultaneously (a assess multiple social cognition domains, (b examine executive functions, (c follow strict sample selection criteria, and (d acknowledge the cognitive heterogeneity typical of the disorder. The study presently reviewed (Baez et al., 2012 addressed all these aspects in order to establish the basis of social cognition deficits in adult AS patients. Specifically, we assessed the performance of AS adults in multiple social cognition tasks with different context-processing requirements. The results suggest that social cognition deficits in AS imply a reduced ability to implicitly encode and integrate contextual cues needed to access social meaning. Nevertheless, the patients’ performance was normal when explicit social information was presented or when the situation could be navigated with abstract rules. Here, we review the results of our study and other relevant data, and discuss their implications for the diagnosis and treatment of AS and other neuropsychiatric conditions (e.g., schizophrenia, bipolar disorder, frontotemporal dementia. Finally, we analyze previous results in the light of a current neurocognitive model of social-context processing.

  6. The development of hydrazine-processed Cu(In,Ga)(Se,S){sub 2} solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Bob, Brion; Lei, Bao; Chung, Choong-Heui; Yang, Wenbing; Hsu, Wan-Ching; Duan, Hsin-Sheng; Hou, William Wei-Jen; Li, Sheng-Han; Yang, Yang [Department of Materials Science and Engineering, University of California, Los Angeles, CA (United States)

    2012-05-15

    The hydrazine-based deposition of Cu(In,Ga)(S,Se){sub 2} (CIGS) thin films has attracted considerable attention in recent years due to its potential for the high-throughput production of photovoltaic devices based on this absorber material. This article provides an introduction as well as presenting a complete picture of the current status of hydrazine-based CIGS solar-cell fabrication, including the three major steps of this deposition process: dissolution of the precursor materials in hydrazine, deposition of a film from the resulting precursor solution, and the completion and characterization of a photovoltaic device following absorber deposition. Recent discoveries are then discussed, regarding the dissolution chemistry of the relevant precursor complexes in hydrazine, which together represent the true foundation of this processing method. Recent studies on CIGS film formation are then summarized, including the control and analysis of the crystalline phase, electronic bandgap, and film morphology. Finally, the latest progress in high-performance device fabrication is highlighted, with a focus on optoelectronic characterization including current-voltage, junction capacitance, and minority carrier lifetime measurements. Finally, a discussion and future outlook is provided. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  7. Effect of advanced oxidation processes (AOP's) on the toxicity of municipal landfill leachates

    Energy Technology Data Exchange (ETDEWEB)

    Slomczynska, B.; Slomczynski, T. [Inst. of Environmental Engineering Systems, Warsaw Univ. of Technology, Warsaw (Poland); Wasowski, J. [Inst. of Water Supply and Hydraulic Construction, Warsaw Univ. of Technology, Warsaw (Poland)

    2003-07-01

    The aim of present study was to assess the effect of AOP's (oxidation ozone and peroxide/ozone) on the toxicity of leachates from municipal landfill for Warsaw, Poland, using battery of tests. Advanced oxidation processes used to pre-treat leachates were carried out in laboratory conditions after their coagulation with the use of FeCl{sub 3}. The effects of the pre-treatment of leachates using the method of coagulation with FeCl{sub 3} depended on the concentration of organic compounds and with optimal conditions of the process ranged from 40 to 70%. Further pre-treatment of the leachates after coagulation, involving the use of oxidation with O{sub 3} and H{sub 2}O{sub 2}/O{sub 3}, did not caused significant decrease of leachate toxicity. The data of this study demonstrated the usefulness of the battery of tests using Daphnia magna, Artemia franciscana, Scenedesmus quadricauda and Vibrio fischeri for the toxicity evaluation of raw and pre-treated leachates. (orig.)

  8. U.S. Nuclear Regulatory Commission Process for Risk-Informing the Nuclear Waste Arena

    International Nuclear Information System (INIS)

    Leslie, B. W.

    2003-01-01

    The U.S. Nuclear Regulatory Commission (NRC) is increasing the use of risk insights and information in its regulation of nuclear materials and waste. The objective of this risk-informed regulatory effort is to improve the effectiveness and efficiency of the agency, while maintaining or increasing its focus on safety. The agency's Office of Nuclear Material Safety and Safeguards (NMSS) proposed a five-step process to carry out a framework for increasing the use of risk information and insights in its regulation of nuclear materials and waste. The office is carrying out the five-step process to risk-inform the nuclear materials and waste arenas. NMSS's actions included forming a Risk Task Group and the use of case studies to test and complete screening criteria for identifying candidate regulatory applications amenable for risk-informing. Other actions included involving stakeholders through enhanced public participation, developing safety goals for materials and waste regulatory applications, and establishing a risk training program for staff. Through the case studies, NRC staff found the draft screening criteria to be effective in deciding regulatory areas that may be amenable to an increased use of risk insights. NRC staff also found that risk information may have the potential to reduce regulatory burden and improve staff's efficiency in making decisions, while maintaining safety. Finally, staff found that it would be possible to develop safety goals for the nuclear materials and waste arenas

  9. Business process modeling applied to oil pipeline and terminal processes: a proposal for TRANSPETRO's oil pipelines and terminals in Rio de Janeiro and Minas Gerais

    Energy Technology Data Exchange (ETDEWEB)

    Santiago, Adilson da Silva [TRANSPETRO - PETROBRAS Transporte S.A., Rio de Janeiro, RJ (Brazil); Caulliraux, Heitor Mansur [Universidade Federal do Rio de Janeiro (COPPE/UFRJ/GPI), RJ (Brazil). Coordenacao de Pos-graduacao em Engenharia. Grupo de Producao Integrada; Almeida, Maria Fatima Ludovico de [Pontificia Universidade Catolica do Rio de Janeiro (PUC-Rio/ITUC), Rio de Janeiro, RJ (Brazil). Instituto Tecnologico; Felippe, Adriana Vieira de Oliveira [TRANSPETRO - PETROBRAS Transporte S.A., Rio de Janeiro, RJ (Brazil)

    2009-07-01

    Business process modeling (BPM) using event driven process chain diagrams (EPCs) to lay out business process work flows is now widely adopted around the world. The EPC method was developed within the framework of the ARIS Toolset developed by Prof. Wilhelm-August Scheer at the Institut fur Wirtschaftsinformatik at the Universitat des Saarlandes, in the early 1990s. It is used by many companies to model, analyze and redesign business processes. As such it forms the core technique for modeling in ARIS, which serves to link the different aspects of the so-called control view, which is discussed in the section on ARIS business process modeling. This paper describes a proposal made to TRANSPETRO's Oil Pipelines and Terminals Division in the states of Rio de Janeiro and Minas Gerais, which will be jointly developed by specialists and managers from TRANSPETRO and from COPPETEC, the collaborative research arm of Rio de Janeiro Federal University (UFRJ). The proposal is based on ARIS business process modeling and is presented here according to its seven phases, as follows: information survey and definition of the project structure; mapping and analysis of Campos Eliseos Terminal (TECAM) processes; validation of TECAM process maps; mapping and analysis of the remaining organizational units' processes; validation of the remaining organizational units' process maps; proposal of a business process model for all organizational units of TRANSPETRO's Oil Pipelines and Terminals Division in Rio de Janeiro and Minas Gerais; critical analysis of the process itself and the results and potential benefits of BPM. (author)

  10. Solid state reactions and diffusion processes during rapid thermal processing of Cu-In-S based semiconductors

    International Nuclear Information System (INIS)

    Enzenhofer, T.

    2007-01-01

    In this thesis thin layers of the system Cu-In-S were studied for the photovoltaic application by means of structural and electro-optical procedures. The effect of small quantities of group II elements on the absorber and component properties could be explained by a widely appointed study. The motivation to insert extraneous elements into CuInS 2 absorber layers results from the too low zero-current voltage of CuInS 2 based solar cells. It could be shown that by addition of small quantities of Zn and/or Mg ( 2 solar cells aimed efficiencies, which were also determined for the reference system. As limiting factor in the doped system the zero-current has been proved. The intensive analysis of the absorber properties showed the the extraneous atoms effect in the bulk and on the surface different modifications

  11. Fictual Matters. Narration as a Process of Relating in Mark Bowden’s Blackhawk Down (1997

    Directory of Open Access Journals (Sweden)

    Nora Berning

    2013-12-01

    Full Text Available Mark Bowden’s hypertext Blackhawk Down (1997 is a paradigmatic example of literary journalism. In this essay, I shall demonstrate that the performative power of Bowden’s hypertext is erected upon a number of textual signals that can be rendered intelligible with the help of analytical tools provided by narratology. I seek to shed light on the genre- and media-specific structures that serve as ways of cultural worldmaking as well as the ethical and epistemological functions of narratological categories that Bowden uses in order to advance narration so that it becomes a process of relating. The most urgent need in the context of a Critical Ethical Narratology (CEN is to find a way to talk about the formal properties of hybridized (fictual genres and to combine this discussion with a consideration of their ideological and ethical implications. The analytical framework of CEN promises to give insights into literary journalism as a genre that is heavily involved in the representation, construction and dissemination of ethical values and norms.

  12. Tactile information processing in primate hand somatosensory cortex (S1) during passive arm movement.

    Science.gov (United States)

    Song, Weiguo; Francis, Joseph Thachil

    2013-11-01

    Motor output mostly depends on sensory input, which also can be affected by action. To further our understanding of how tactile information is processed in the primary somatosensory cortex (S1) in dynamic environments, we recorded neural responses to tactile stimulation of the hand in three awake monkeys under arm/hand passive movement and rest. We found that neurons generally responded to tactile stimulation under both conditions and were modulated by movement: with a higher baseline firing rate, a suppressed peak rate, and a smaller dynamic range during passive movement than during rest, while the area under the response curve was stable across these two states. By using an information theory-based method, the mutual information between tactile stimulation and neural responses was quantified with rate and spatial coding models under the two conditions. The two potential encoding models showed different contributions depending on behavioral contexts. Tactile information encoded with rate coding from individual units was lower than spatial coding of unit pairs, especially during movement; however, spatial coding had redundant information between unit pairs. Passive movement regulated the mutual information, and such regulation might play different roles depending on the encoding strategies used. The underlying mechanisms of our observation most likely come from a bottom-up strategy, where neurons in S1 were regulated through the activation of the peripheral tactile/proprioceptive receptors and the interactions between these different types of information.

  13. Political Parties and Popular Representation in Myanmar’s Democratisation Process

    Directory of Open Access Journals (Sweden)

    Kristian Stokke

    2015-01-01

    Full Text Available The article examines the role of political parties in Myanmar’s democratisation process. We argue that the substance of democratisation depends on popular representation through political parties but question their capacity to provide such representation. Examining capacity through the concept of party institutionalisation, we find that most parties have not been able to build effective organisational structures. However, we also find a degree of party institutionalisation in the form of rootedness in society. Political cleavages between those favouring authoritarian rule over democratic rule and Burman nationhood over ethnic notions of nationhood have produced divisions between state-centred parties associated with Myanmar’s authoritarian legacy and society-centred pro-democracy and ethnic parties. Although being less dichotomous than in the past, we argue that these cleavages continue to provide a basis for party identity and rootedness in society. We conclude that further development of political parties and popular representation will be shaped by the relations between parties, the state, and society – where individual parties are shaped according to their tendencies towards state-centred cartel parties or society-centred mass parties.

  14. Direct Urca Processes Involving Proton 1 S 0 Superfluidity in Neutron Star Cooling

    Science.gov (United States)

    Xu, Yan; Yu, Zi; Zhang, Xiao-Jun; Fan, Cun-Bo; Liu, Guang-Zhou; Zhao, En-Guang; Huang, Xiu-Lin; Liu, Cheng-Zhi

    2018-04-01

    A detailed description of the baryon direct Urca processes A: n\\to p+e+{\\bar{ν }}e, B: Λ \\to p+e+{\\bar{ν }}e and C: {\\Xi }-\\to Λ +e+{\\bar{ν }}e related to the neutron star cooling is given in the relativistic mean field approximation. The contributions of the reactions B and C on the neutrino luminosity are calculated by means of the relativistic expressions of the neutrino energy losses. Our results show that the total neutrino luminosities of the reactions A, B and C within the mass range (1.603–2.067) M⊙ ((1.515–1.840) M⊙ for TM1 model) for GM1 model are larger than the corresponding values for neutron star without hyperons. Furthermore, although the neutrino emissivity of the reaction A is suppressed with the appearance of the proton 1 S 0 superfluid, the contribution of the reactions B and C can still quicken a massive neutron star cooling. In particular, the reaction C in PSR J1614-2230 and J0348+0432 is not suppressed by the proton 1 S 0 superfluid due to the higher threshold density of the reaction C, which will further speed up the two pulsars cooling. Supported by the National Natural Science Foundation of China under Grant Nos. 11447165, 11373047, 11404336 and U1731240, Youth Innovation Promotion Association, CAS under Grant No. 2016056, and the Development Project of Science and Technology of Jilin Province under Grant No. 20180520077JH

  15. Eye movement analysis and cognitive processing: detecting indicators of conversion to Alzheimer’s disease

    Science.gov (United States)

    Pereira, Marta LG Freitas; Camargo, Marina von Zuben A; Aprahamian, Ivan; Forlenza, Orestes V

    2014-01-01

    A great amount of research has been developed around the early cognitive impairments that best predict the onset of Alzheimer’s disease (AD). Given that mild cognitive impairment (MCI) is no longer considered to be an intermediate state between normal aging and AD, new paths have been traced to acquire further knowledge about this condition and its subtypes, and to determine which of them have a higher risk of conversion to AD. It is now known that other deficits besides episodic and semantic memory impairments may be present in the early stages of AD, such as visuospatial and executive function deficits. Furthermore, recent investigations have proven that the hippocampus and the medial temporal lobe structures are not only involved in memory functioning, but also in visual processes. These early changes in memory, visual, and executive processes may also be detected with the study of eye movement patterns in pathological conditions like MCI and AD. In the present review, we attempt to explore the existing literature concerning these patterns of oculomotor changes and how these changes are related to the early signs of AD. In particular, we argue that deficits in visual short-term memory, specifically in iconic memory, attention processes, and inhibitory control, may be found through the analysis of eye movement patterns, and we discuss how they might help to predict the progression from MCI to AD. We add that the study of eye movement patterns in these conditions, in combination with neuroimaging techniques and appropriate neuropsychological tasks based on rigorous concepts derived from cognitive psychology, may highlight the early presence of cognitive impairments in the course of the disease. PMID:25031536

  16. Development Instrument’s Learning of Physics Through Scientific Inquiry Model Based Batak Culture to Improve Science Process Skill and Student’s Curiosity

    Science.gov (United States)

    Nasution, Derlina; Syahreni Harahap, Putri; Harahap, Marabangun

    2018-03-01

    This research aims to: (1) developed a instrument’s learning (lesson plan, worksheet, student’s book, teacher’s guide book, and instrument test) of physics learning through scientific inquiry learning model based Batak culture to achieve skills improvement process of science students and the students’ curiosity; (2) describe the quality of the result of develop instrument’s learning in high school using scientific inquiry learning model based Batak culture (lesson plan, worksheet, student’s book, teacher’s guide book, and instrument test) to achieve the science process skill improvement of students and the student curiosity. This research is research development. This research developed a instrument’s learning of physics by using a development model that is adapted from the development model Thiagarajan, Semmel, and Semmel. The stages are traversed until retrieved a valid physics instrument’s learning, practical, and effective includes :(1) definition phase, (2) the planning phase, and (3) stages of development. Test performed include expert test/validation testing experts, small groups, and test classes is limited. Test classes are limited to do in SMAN 1 Padang Bolak alternating on a class X MIA. This research resulted in: 1) the learning of physics static fluid material specially for high school grade 10th consisted of (lesson plan, worksheet, student’s book, teacher’s guide book, and instrument test) and quality worthy of use in the learning process; 2) each component of the instrument’s learning meet the criteria have valid learning, practical, and effective way to reach the science process skill improvement and curiosity in students.

  17. Think-aloud process superior to thought-listing in increasing children’s critical processing of advertising

    NARCIS (Netherlands)

    Rozendaal, E.; Buijzen, M.; Valkenburg, P.M.

    2012-01-01

    This study develops and tests a model of children's critical processing of advertising. Within this model, 2 paths to reduced advertising susceptibility (i.e., attitude toward the advertised brand) were hypothesized: a cognitive path and an affective path. The secondary aim was to compare these

  18. Eye movement analysis and cognitive processing: detecting indicators of conversion to Alzheimer’s disease

    Directory of Open Access Journals (Sweden)

    Pereira ML

    2014-07-01

    Full Text Available Marta LG Freitas Pereira, Marina von Zuben A Camargo, Ivan Aprahamian, Orestes V ForlenzaLaboratory of Neuroscience (LIM-27, Department and Institute of Psychiatry, Faculty of Medicine, University of São Paulo, São Paulo, SP, BrazilAbstract: A great amount of research has been developed around the early cognitive ­impairments that best predict the onset of Alzheimer’s disease (AD. Given that mild cognitive impairment (MCI is no longer considered to be an intermediate state between normal aging and AD, new paths have been traced to acquire further knowledge about this condition and its subtypes, and to determine which of them have a higher risk of conversion to AD. It is now known that other deficits besides episodic and semantic memory impairments may be present in the early stages of AD, such as visuospatial and executive function deficits. Furthermore, recent investigations have proven that the hippocampus and the medial temporal lobe structures are not only involved in memory functioning, but also in visual processes. These early changes in memory, visual, and executive processes may also be detected with the study of eye movement patterns in pathological conditions like MCI and AD. In the present review, we attempt to explore the existing literature concerning these patterns of oculomotor changes and how these changes are related to the early signs of AD. In particular, we argue that deficits in visual short-term memory, specifically in iconic memory, attention processes, and inhibitory control, may be found through the analysis of eye movement patterns, and we discuss how they might help to predict the progression from MCI to AD. We add that the study of eye movement patterns in these conditions, in combination with neuroimaging techniques and appropriate neuropsychological tasks based on rigorous concepts derived from cognitive psychology, may highlight the early presence of cognitive impairments in the course of the disease

  19. Passion’s Slave? : Conscious and Unconscious Cognitive Processes in Alcohol and Drug Abuse

    NARCIS (Netherlands)

    Wiers, R.W.; Field, M.; Stacy, A.W.; Sher, K.J.

    2016-01-01

    This chapter reviews the literature on cognitive processes in substance use disorders from a dual-process perspective. In dual-process models, behavior is viewed as the joint outcome of "impulsive" and "reflective" processes. Reflective processes rely on a single limited capacity mechanism and can

  20. Validation of the Tactical Air Force’s Decision Making Process to Prioritize Modifications Using the Analytic Hierarchy Process.

    Science.gov (United States)

    1987-12-01

    were presented. The second part of the thesis proposed the alternative methods of decision analysis and PROMETHEE to solve TAF’s . prioritization...of decision analysis (DA) and Preference Ranking Orqanization Method for Enrichment Evaluations ( PROMETHEE ) will be explained. First, the...dollars. However, once this task is successfully accomplished, TAF would be able to use DA to prioritize their mods. The PROMETHEE is a "new class of

  1. Salinity inhibits post transcriptional processing of chloroplast 16S rRNA in shoot cultures of jojoba (Simmondsia chinesis).

    Science.gov (United States)

    Mizrahi-Aviv, Ela; Mills, David; Benzioni, Aliza; Bar-Zvi, Dudy

    2005-03-01

    Chloroplast metabolism is rapidly affected by salt stress. Photosynthesis is one of the first processes known to be affected by salinity. Here, we report that salinity inhibits chloroplast post-transcriptional RNA processing. A differentially expressed 680-bp cDNA, containing the 3' sequence of 16S rRNA, transcribed intergenic spacer, exon 1 and intron of tRNA(Ile), was isolated by differential display reverse transcriptase PCR from salt-grown jojoba (Simmondsia chinesis) shoot cultures. Northern blot analysis indicated that although most rRNA appears to be fully processed, partially processed chloroplast 16S rRNA accumulates in salt-grown cultures. Thus, salinity appears to decrease the processing of the rrn transcript. The possible effect of this decreased processing on physiological processes is, as yet, unknown.

  2. Forecasting Municipal and Industrial Water: IWR MAIN System User’s Guide for Interactive Processing and User’s Manual.

    Science.gov (United States)

    1983-07-01

    LAUNDROMATS LNDY LAUNDRY MEDL MEDICAL OFFICES MOTL MOTELS MOVI DRIVE-IN MOVIES NURS NURSING HOMES OFFN NEW OFFICE BLDG. OFFO OLD OFFICE BLDG. * JAIL...CHURCHES CLUB GOLF-SWIM CLUBS BOWL BOWLING ALLEYS COLG COLLEGES RESID. HOSP MED CENTERS HOTL HOTELS LNDM LAUNDROMATS LNDY LAUNDRY MEDL MEDICAL OFFICES... Laundromat data YMCA Type Facilities Data for YMCA, YWCA, etc. U.S. Census Bureau Many commercial parameters % "Census of Business" Department of Employment

  3. Multifactor Analysis of Roadheader’s Body Pose Responses during the Horizontal Cutting Process

    Directory of Open Access Journals (Sweden)

    Kai Zong

    2018-01-01

    Full Text Available Based on the Lagrange equation in system dynamics, aiming at the horizontal cutting process, the dynamical coupling model of boom-type roadheader’s body pose was established. According to input problem of solving the model, a calculation method of the cutting head load was proposed, and the relationship between the cutting head load and pressure of the driving cylinders and swing angle of the cutting arm was obtained through simulating analysis. The simulation model was established to solve the dynamical coupling model. The cutting head load, horizontal swing angle of the cutting arm, and dip angle of coal seam were regarded as independent variables to perform changing parameter analysis in variations of the body pose. The field experiment was carried out, and the measured data is basically consistent with the simulation values. The results show that lateral displacement of the body can reach up to 6.5 cm, backward displacement can reach up to 5.2 cm, floor-based quantity can reach up to 11 cm, pitch angle of the body can reach up to 7.8°, and roll angle can reach up to 2.1°. Variations of the body pose parameters are influenced greatly by the cutting head load, while the influence from horizontal swing angle of the cutting arm and dip angle of coal seam is slighter. Among the pose parameters, floor-based quantity and pitch angle of the body vary relatively greatly, which tend to seriously influence forming quality of the roadway and should be mainly considered in deviation rectification of the roadheader’s body pose.

  4. [Trends in the urbanization process in Central America in the 1980's].

    Science.gov (United States)

    Lungo Ucles, M

    1990-01-01

    In the 1980s, urbanization in Central America was increasing compared to the three previous decades. By 1990, the urban population reached 42% in Guatemala, 44% in El Salvador, 43% in Honduras, 59% in Nicaragua, 53% in Costa Rica, and 54% in Panama. The urban population increased mostly in the largest cities, in contrast to Latin America, where secondary cities grew fastest. This trend was particularly true in Managua and San Salvador because of the military conflicts. The only exception was Honduras, where the second city underwent stronger growth. The urban population comprised 51.7% women and 48.3% men in Central America. The segregation and polarization of social classes was also increasing because of increased poverty and unemployment during the 1980s. This was partly caused by the increasing privatization of public services, decentralization, and the reinforcement of local governments, which all ensued from the structural readjustment programs of the International Monetary Fund. This neoliberal model of economic development in the short run resulted in increased poverty and unemployment for the urban populations. In 1982, the informal sector represented 29% of the total employment in Central America, and its share reached 40% in Managua and San Salvador. Urban unemployment increased from 2.2% in 1980 to 12% in 1988 in Guatemala; from 8.8% to 13.1% in Honduras; and from 10.4% to 20.8% in Panama. In the political arena, the process of democratization was underway, with civil presidents taking power and promoting privatization and deregulation of the economy. There was a close relationship between the urban social structure, the economy, and politics in the region. In Costa Rica, during the Arias administration between 1986 and 1990, a program was implemented creating 80,000 new homes, and in El Salvador there was an increasing demand to find a negotiated solution to the military conflict. These new political and economic perspectives could lead to genuine

  5. Evaluating Sustainable Competitive Advantages in Brazilian and U.S. Processed Citrus Supply Chains: An Application of Porter’s Diamond Framework

    Directory of Open Access Journals (Sweden)

    James A. Sterns

    2010-05-01

    Full Text Available The processed citrus industries of Sao Paulo, Brazil and Florida, United States collectively account for over 80 percent of world orange juice production. In recent years, both industries have been confronted with serious plant disease outbreaks. Porter’s Diamond framework is used to assess the strenghts and weakness of the processed citrus industry in each country to confront the combined challenge of effectively combating these diseases while maintaining market competitiveness. Although Sao Paulo and Florida produce a similar product, the Porter’s Diamond framework reveals that there are significant diffences in the organizational structure of the two industries. The article concludes with an analysis of how these differences will impact each industry’s ability to sustain its global leadership in the international processed citrus market.

  6. The regulator's stake in a multi-stakeholder process

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Mikael; Larsson, Carl-Magnus [Swedish Radiation Protection Inst., Stockholm (Sweden); Norrby, Soeren; Westerlind, Magnus [Swedish Nuclear Power Inspectorate, Stockholm (Sweden)

    1999-12-01

    The siting of a repository for spent nuclear fuel poses a number of challenges to a broad range of stakeholders, e.g. implementers, regulators, potential host municipalities, environmental groups, political decision-makers on different levels and the public. This paper presents some regulatory challenges as experienced and approached by the Swedish regulators most involved in nuclear waste management (the Swedish Radiation Protection Institute, SSI, and the Swedish Nuclear Power Inspectorate, SKI). First the regulatory framework is outlined with emphasis on decision-making processes and environmental impact assessment. Then a short background is given to the current status of the ongoing programme for repository siting. The main part of the paper discusses some conclusions from the so-called RISCOM pilot project, which was concluded in 1998. The paper also contains some findings from other projects as well as some experiences from the ongoing siting process. It is important to have independent regulators, with the capacity to review the safety assessment of the implementer. The regulators also have the challenging task to be people's experts in stretching the implementer. At the same time they should expose themselves to the being stretched by other stakeholders and the public at large. Experience also shows that regulators should engage early in the pre-licensing phase, e.g. in EIA and siting, and that this can be done without compromising the independence and integrity needed in the licensing phase. The regulator must be present at all levels, and observant of the participants' different needs and roles played on the national, regional and local level. A well structured, but flexible, EIA appear to be an efficient 'vehicle' for public participation. However, it is believed that the EIA should be complemented with hearings, in both the pre-licensing and licensing phases, since this is believed to increase the transparency of the decision making

  7. Salta’s elite during the state´s formation process, 1850-1880. Regional trade and land distribution

    Directory of Open Access Journals (Sweden)

    Juan Ignacio Quintián

    2012-11-01

    Full Text Available The following paper analyzes cadastres and provincial census taken between 1856 and 1875 to identify the salteño landowning elite. The study begins with the synthesis of the intraregional trade involving the landowning elite of Salta; the study describes the new tax structure created in 1855 to characterize wealthy families of the province. The analysis combines the detailed description of the sources used with the narrative of some facts that contribute to understand the complex relationship between the landowning elite and the state-formation process

  8. Neutron capture cross section of $^{90}$Zr Bottleneck in the s-process reaction flow

    CERN Document Server

    Tagliente, G; Milazzo, P M; Moreau, C; Aerts, G; Abbondanno, U; Alvarez, H; Alvarez-Velarde, F; Andriamonje, Samuel A; Andrzejewski, J; Assimakopoulos, Panayiotis; Audouin, L; Badurek, G; Baumann, P; Bečvář, F; Berthoumieux, E; Bisterzo, S; Calviño, F; Calviani, M; Cano-Ott, D; Capote, R; Carrapiço, C; Cennini, P; Chepel, V; Chiaveri, Enrico; Colonna, N; Cortés, G; Couture, A; Cox, J; Dahlfors, M; David, S; Dillman, I; Domingo-Pardo, C; Dridi, W; Durán, I; Eleftheriadis, C; Embid-Segura, M; Ferrant, L; Ferrari, A; Ferreira-Marques, R; Furman, W; Gallino, R; Gonçalves, I; Gonzalez-Romero, E; Gramegna, F; Guerrero, C; Gunsing, F; Haas, B; Haight, R; Heil, M; Herrera-Martínez, A; Igashira, M; Jericha, E; Käppeler, F; Kadi, Y; Karadimos, D; Karamanis, D; Kerveno, M; Köhler, P; Kossionides, E; Krtička, M; Lamboudis, C; Leeb, H; Lindote, A; Lopes, I; Lozano, M; Lukic, S; Marganiec, J; Marrone, S; Martínez, T; Massimi, C; Mastinu, P; Mengoni, A; Mosconi, M; Neves, F; Oberhummer, Heinz; O'Brien, S; Pancin, J; Papachristodoulou, C; Papadopoulos, C; Paradela, C; Patronis, N; Pavlik, A; Pavlopoulos, P; Perrot, L; Pigni, M T; Plag, R; Plompen, A; Plukis, A; Poch, A; Praena, J; Pretel, C; Quesada, J; Rauscher, T; Reifarth, R; Rubbia, Carlo; Rudolf, G; Rullhusen, P; Salgado, J; Santos, J; Sarchiapone, L; Savvidis, I; Stéphan, C; Taín, J L; Tassan-Got, L; Tavora, L; Terlizzi, R; Vannini, G; Vaz, P; Ventura, A; Villamarín, D; Vincente, M, C; Vlachoudis, V; Vlastou, R; Voss, F; Walter, S; Wendler, H; Wiescher, M; Wisshak, K

    2008-01-01

    The neutron capture cross sections of the Zr isotopes have important implications in nuclear astrophysics and for reactor design. The small cross section of the neutron magic nucleus 90Zr, which accounts for more than 50% of natural zirconium represents one of the key isotopes for the stellar s-process, because it acts as a bottleneck in the neutron capture chain between the Fe seed and the heavier isotopes. The same element, Zr, also is an important component of the structural materials used in traditional and advanced nuclear reactors. The (n,γ) cross section has been measured at CERN, using the n_TOF spallation neutron source. In total, 45 resonances could be resolved in the neutron energy range below 70 keV, 10 being observed for the first time thanks to the high resolution and low backgrounds at n_TOF. On average, the Γγ widths obtained in resonance analyses with the R-matrix code SAMMY were 15% smaller than reported previously. By these results, the accuracy of the Maxwellian averaged cross section f...

  9. Thyroid hormone’s role in regulating brain glucose metabolism and potentially modulating hippocampal cognitive processes

    Science.gov (United States)

    Jahagirdar, V; McNay, EC

    2012-01-01

    Cognitive performance is dependent on adequate glucose supply to the brain. Insulin, which regulates systemic glucose metabolism, has been recently shown both to regulate hippocampal metabolism and to be a mandatory component of hippocampally-mediated cognitive performance. Thyroid hormones (TH) regulate systemic glucose metabolism and may also be involved in regulation of brain glucose metabolism. Here we review potential mechanisms for such regulation. Importantly, TH imbalance is often encountered in combination with metabolic disorders, such as diabetes, and may cause additional metabolic dysregulation and hence worsening of disease states. TH’s potential as a regulator of brain glucose metabolism is heightened by interactions with insulin signaling, but there have been relatively few studies on this topic or on the actions of TH in a mature brain. This review discusses evidence for mechanistic links between TH, insulin, cognitive function, and brain glucose metabolism, and suggests that TH is a good candidate to be a modulator of memory processes, likely at least in part by modulation of central insulin signaling and glucose metabolism. PMID:22437199

  10. Solution processed Cu2SnS3 thin films for visible and infrared photodetector applications

    Directory of Open Access Journals (Sweden)

    Sandra Dias

    2016-02-01

    Full Text Available The Cu2SnS3 thin films were deposited using an economic, solution processible, spin coating technique. The films were found to possess a tetragonal crystal structure using X-ray diffraction. The film morphology and the particle size were determined using scanning electron microscopy. The various planes in the crystal were observed using transmission electron microscopy. The optimum band gap of 1.23 eV and a high absorption coefficient of 104 cm−1 corroborate its application as a photoactive material. The visible and infrared (IR photo response was studied for various illumination intensities. The current increased by one order from a dark current of 0.31 μA to a current of 1.78 μA at 1.05 suns and 8.7 μA under 477.7 mW/cm2 IR illumination intensity, at 3 V applied bias. The responsivity, sensitivity, external quantum efficiency and specific detectivity were found to be 10.93 mA/W, 5.74, 2.47% and 3.47 × 1010 Jones respectively at 1.05 suns and 16.32 mA/W, 27.16, 2.53% and 5.10 × 1010 Jones respectively at 477.7 mW/cm2 IR illumination. The transient photoresponse was measured both for visible and IR illuminations.

  11. Recent results in explosive and s-process nucleosynthesis from measurements on radioactive and stable targets

    International Nuclear Information System (INIS)

    Koehler, P.E.; Kaeppeler, F.; Schatz, H.

    1993-01-01

    Measurements of (n,p) and (n,α) cross sections are crucial for a better understanding of many scenarios of nucleosynthesis. Current problems in which such reactions play a roll include the possible synthesis of heavy element during the big bang. The production of several rare isotopes in explosive nucleosynthesis, and a better understanding of the role of the s process in the synthesis of light and intermediate mass nuclei. We have recently completed measurements of several (n,p) and (n,α) cross sections of importance to nuclear astrophysics. The cross sections were measured in the range from thermal energy to approximately 1 MeV by using the white neutron source at the Manuel Lujan, Jr. Neutron Scattering Center (LANSCE) in Los Alamos. We have also made complementary measurements at the Karlsruhe Van de Graaff and at thee Oak Ridge Electron Linear Accelerator (ORELA). We discuss the impact of the results on nuclear astrophysics as well as recent improvements and future plans

  12. Developmental changes in children’s processing of redundant modifiers in definite object descriptions

    Directory of Open Access Journals (Sweden)

    Ruud Koolen

    2016-12-01

    Full Text Available This paper investigates developmental changes in children’s processing of redundant information in definite object descriptions. In two experiments, children of two age groups (six or seven, and nine or ten years old were presented with pictures of sweets. In the first experiment (pairwise comparison, two identical sweets were shown, and one of these was described with a redundant modifier. After the description, the children had to indicate the sweet they preferred most in a forced-choice task. In the second experiment (graded rating, only one sweet was shown, which was described with a redundant color modifier in half of the cases (e.g., the blue sweet and in the other half of the cases simply as the sweet. This time, the children were asked to indicate on a 5-point rating scale to what extent they liked the sweets. In both experiments, the results showed that the younger children had a preference for the sweets described with redundant information, while redundant information did not have an effect on the preferences for the older children. These results imply that children are learning to distinguish between situations in which redundant information carries an implicature and situations in which this is not the case.

  13. Men’s artistic gymnastics: is the use of elastic surfaces systematic in the training process?

    Directory of Open Access Journals (Sweden)

    Marco Antonio Coelho BORTOLETO

    2016-03-01

    Full Text Available Abstract In Artistic Gymnastics, the area (the apparatus represents the most relevant systemic component. Thus, when one strives to comprehend the internal logic of this sport, the gymnast-apparatus relationship warrants special attention. A change in the training paradigm was observed, showing that the use of Elastic Surfaces (ES is an essential resource, due to the contemporary features of this sport, such as the hyper-valorisation of acrobatics and a greater presence of flight elements. Through a case study developed in a men’s artistic gymnastics high-performance gymnasium, this study analysed the use of different ES in the training process. Although coaches recognize the importance of ES in training programs, the record of daily activities showed that this use is still limited to select equipment and is not systematic. Such difficulties are due mainly to the lack of educational programs to the development of certain specific methodologies and the non-existence of national equipment suppliers certified by International Gymnastics Federation.

  14. Effect of welding processes on corrosion resistance of UNS S31803 duplex stainless steel

    International Nuclear Information System (INIS)

    Chiu, Liu Ho; Hsieh, Wen Chin

    2003-01-01

    An attractive combination of corrosion resistance and mechanical properties in the temperature range -50 to 250 .deg. C is offered by duplex stainless steel. However, undesirable secondary precipitation phase such as σ, γ 2 and Cr 2 N may taken place at the cooling stage from the welding processes. Therefore, this paper describes the influence of different welding procedures such as manual metal arc welding (MMA), tungsten inert gas welding (TIG) and vacuum brazing on corrosion resistance of the welded joint for UNS S31803 duplex stainless steel. Microstructure and chemical compositions of the welded joint were examined. The weight loss of specimens immersed in 6% FeCl 3 solution at 47.5 .deg. C for 24-hours was determined and used to evaluate the pitting resistance of duplex stainless steel and their welds. The region of heat-affected zone of specimen obtained by the MMA is much wider than that resulted from TIG, therefore, the weight loss of welds by MMA was larger than that of weld by TIG. The weight loss of brazed specimens cooled from slow cooling rate was larger than those of specimens cooled from high cooling rate, because the precipitation of σ phase. Beside that, the weight loss of brazed specimen is greater than those of the welded specimens. The galvanic corrosion was observed in brazed duplex stainless steel joints in the chloride solution

  15. THE EFFECT MODEL INQUIRY TRAINING MEDIA AND LOGICAL THINKING ABILITY TO STUDENT’S SCIENCE PROCESS SKILL

    Directory of Open Access Journals (Sweden)

    Dahrim Pohan

    2017-06-01

    Full Text Available The aim of the research is to analyz : student’s science process skill using inquiry training learning model is better than konvesional learning.Student’s science process skill who have logical thinking ability above average are better than under average,and the interaction between inquiry training media and logical thinking ability to increase student’s science process skill.The experiment was conducted in SMP 6 Medan as population and class VII-K and VII-J were chosen as sample through cluster random sampling.Science prosess skill used essay test and logical thinking used multiple choice as instrument.Result of the data was analyzed by using two ways ANAVA.Result show that : student’s science process skill using inquiry training learning model is better than konvesional learning,student’s science process skill who logical thinking ability above average are better than under average and the interaction between inquiry training learning model media and logical thinking ability to increase student’s science process skill.

  16. THE WEAK s-PROCESS IN MASSIVE STARS AND ITS DEPENDENCE ON THE NEUTRON CAPTURE CROSS SECTIONS

    International Nuclear Information System (INIS)

    Pignatari, M.; Herwig, F.; Gallino, R.; Bisterzo, S.; Heil, M.; Wiescher, M.; Kaeppeler, F.

    2010-01-01

    The slow neutron capture process in massive stars (weak s process) produces most of the s-process isotopes between iron and strontium. Neutrons are provided by the 22 Ne(α,n) 25 Mg reaction, which is activated at the end of the convective He-burning core and in the subsequent convective C-burning shell. The s-process-rich material in the supernova ejecta carries the signature of these two phases. In the past years, new measurements of neutron capture cross sections of isotopes beyond iron significantly changed the predicted weak s-process distribution. The reason is that the variation of the Maxwellian-averaged cross sections (MACS) is propagated to heavier isotopes along the s path. In the light of these results, we present updated nucleosynthesis calculations for a 25 M sun star of Population I (solar metallicity) in convective He-burning core and convective C-burning shell conditions. In comparison with previous simulations based on the Bao et al. compilation, the new measurement of neutron capture cross sections leads to an increase of s-process yields from nickel up to selenium. The variation of the cross section of one isotope along the s-process path is propagated to heavier isotopes, where the propagation efficiency is higher for low cross sections. New 74 Ge, 75 As, and 78 Se MACS result in a higher production of germanium, arsenic, and selenium, thereby reducing the s-process yields of heavier elements by propagation. Results are reported for the He core and for the C shell. In shell C-burning, the s-process nucleosynthesis is more uncertain than in the He core, due to higher MACS uncertainties at higher temperatures. We also analyze the impact of using the new lower solar abundances for CNO isotopes on the s-process predictions, where CNO is the source of 22 Ne, and we show that beyond Zn this is affecting the s-process yields more than nuclear or stellar model uncertainties considered in this paper. In particular, using the new updated initial

  17. Putting Broca’s region into context – fMRI evidence for a role in predictive language processing

    DEFF Research Database (Denmark)

    Kristensen, Line Burholt; Wallentin, Mikkel

    2015-01-01

    to syntactical analysis. Others, however, have related Broca’s region activity to more domain-general processes, e.g. working memory load and argument hierarchy demands. We here present results that show how contextual cues completely alter the effects of syntax in behaviour and in Broca’s region, and suggest...

  18. Isotopic constraints on contamination processes in the Tonian Goiás Stratiform Complex

    Science.gov (United States)

    Giovanardi, Tommaso; Mazzucchelli, Maurizio; Lugli, Federico; Girardi, Vicente A. V.; Correia, Ciro T.; Tassinari, Colombo C. G.; Cipriani, Anna

    2018-06-01

    The Tonian Goiás Stratiform Complex (TGSC, Goiás, central Brazil), is one of the largest mafic-ultramafic layered complexes in the world, emplaced during the geotectonic events that led to the Gondwana accretion. In this study, we present trace elements and in-situ U/Pb-Lu-Hf analyses of zircons and 87Sr/86Sr ratios of plagioclases from anorthosites and gabbros of the TGSC. Although formed by three isolated bodies (Cana Brava, Niquelândia and Barro Alto), and characterized by a Lower and Upper Sequence (LS and US), our new U/Pb zircon data confirm recent geochemical, geochronological, and structural evidences that the TGSC has originated from a single intrusive body in the Neoproterozoic. New Hf and Sr isotope ratios construe a complex contamination history for the TGSC, with different geochemical signatures in the two sequences. The low Hf and high Sr isotope ratios of the Lower Sequence (εHf(t) from -4.2 down to -27.5; 87Sr/86Sr = 0.706605-0.729226), suggest the presence of a crustal component and are consistent with contamination from meta-pelitic and calc-silicate rocks found as xenoliths within the Sequence. The more radiogenic Hf isotope ratios and low Sr isotope composition of the Upper Sequence (εHf(t) from 11.3 down to -8.4; 87Sr/86Sr = 0.702368-0.702452), suggest a contamination from mantle-derived metabasalts in agreement with the occurrences of amphibolite xenoliths in the US stratigraphy. The differential contamination of the two sequences is explained by the intrusion of the TGSC in a stratified crust dominated by metasedimentary rocks in its deeper part and metavolcanics at shallower levels. Moreover, the differential thermal gradient in the two crystallizing sequences might have contributed to the preservation and recrystallization of inherited zircon grains in the US and total dissolution or magmatic overgrowth of the LS zircons via melt/rock reaction processes.

  19. Convenient hydrothermal decomposition process for preparation of nanocrystalline mineral Cu3BiS3 and Pb1-xBi2x/3S

    International Nuclear Information System (INIS)

    Hu Junqing; Deng Bin; Wang Chunrui; Tang Kaibin; Qian Yitai

    2003-01-01

    Mineral nanocrystalline Cu 3 BiS 3 and Pb 1-x Bi 2x/3 S (or Bi 0.22 Pb 0.89 S 1.22 ) have been prepared at low synthetic temperature of 100-150 deg. C by convenient hydrothermal decomposition process. X-ray powder diffraction, transmission electron microscopy, X-ray photoelectron spectra, and element analysis were used to characterize and measure the samples. The as-prepared Cu 3 BiS 3 sample consisted of whisker-like particles with an average size of 50x10 nm 2 and the Pb 1-x Bi 2x/3 S sample displayed aggregative particles with size in the range of 30-50 nm. Preliminary results showed that the prepared precursors, reaction temperature and time played a role in the formation of the final products. A possible reaction mechanism was also discussed briefly

  20. Process-tracing methods in decision making: on growing up in the 70s

    NARCIS (Netherlands)

    Schulte-Mecklenbeck, M.; Johnson, J.G.; Böckenholt, U.; Goldstein, D.G.; Russo, J.E.; Sullivan, N.J.; Willemsen, M.C.

    2017-01-01

    Decision research has experienced a shift from simple algebraic theories of choice to an appreciation of mental processes underlying choice. A variety of process-tracing methods has helped researchers test these process explanations. Here, we provide a survey of these methods, including specific

  1. Protocol Processing for 100 Gbit/s and Beyond - A Soft Real-Time Approach in Hardware and Software

    Science.gov (United States)

    Büchner, Steffen; Lopacinski, Lukasz; Kraemer, Rolf; Nolte, Jörg

    2017-09-01

    100 Gbit/s wireless communication protocol processing stresses all parts of a communication system until the outermost. The efficient use of upcoming 100 Gbit/s and beyond transmission technology requires the rethinking of the way protocols are processed by the communication endpoints. This paper summarizes the achievements of the project End2End100. We will present a comprehensive soft real-time stream processing approach that allows the protocol designer to develop, analyze, and plan scalable protocols for ultra high data rates of 100 Gbit/s and beyond. Furthermore, we will present an ultra-low power, adaptable, and massively parallelized FEC (Forward Error Correction) scheme that detects and corrects bit errors at line rate with an energy consumption between 1 pJ/bit and 13 pJ/bit. The evaluation results discussed in this publication show that our comprehensive approach allows end-to-end communication with a very low protocol processing overhead.

  2. Enhanced Carrier Collection from CdS Passivated Grains in Solution-Processed Cu2ZnSn(S,Se)4 Solar Cells.

    Science.gov (United States)

    Werner, Melanie; Keller, Debora; Haass, Stefan G; Gretener, Christina; Bissig, Benjamin; Fuchs, Peter; La Mattina, Fabio; Erni, Rolf; Romanyuk, Yaroslav E; Tiwari, Ayodhya N

    2015-06-10

    Solution processing of Cu2ZnSn(S,Se)4 (CZTSSe)-kesterite solar cells is attractive because of easy manufacturing using readily available metal salts. The solution-processed CZTSSe absorbers, however, often suffer from poor morphology with a bilayer structure, exhibiting a dense top crust and a porous bottom layer, albeit yielding efficiencies of over 10%. To understand whether the cell performance is limited by this porous layer, a systematic compositional study using (scanning) transmission electron microscopy ((S)TEM) and energy-dispersive X-ray spectroscopy of the dimethyl sulfoxide processed CZTSSe absorbers is presented. TEM investigation revealed a thin layer of CdS that is formed around the small CZTSSe grains in the porous bottom layer during the chemical bath deposition step. This CdS passivation is found to be beneficial for the cell performance as it increases the carrier collection and facilitates the electron transport. Electron-beam-induced current measurements reveal an enhanced carrier collection for this buried region as compared to reference cells with evaporated CdS.

  3. RNase MRP is required for entry of 35S precursor rRNA into the canonical processing pathway.

    Science.gov (United States)

    Lindahl, Lasse; Bommankanti, Ananth; Li, Xing; Hayden, Lauren; Jones, Adrienne; Khan, Miriam; Oni, Tolulope; Zengel, Janice M

    2009-07-01

    RNase MRP is a nucleolar RNA-protein enzyme that participates in the processing of rRNA during ribosome biogenesis. Previous experiments suggested that RNase MRP makes a nonessential cleavage in the first internal transcribed spacer. Here we report experiments with new temperature-sensitive RNase MRP mutants in Saccharomyces cerevisiae that show that the abundance of all early intermediates in the processing pathway is severely reduced upon inactivation of RNase MRP. Transcription of rRNA continues unabated as determined by RNA polymerase run-on transcription, but the precursor rRNA transcript does not accumulate, and appears to be unstable. Taken together, these observations suggest that inactivation of RNase MRP blocks cleavage at sites A0, A1, A2, and A3, which in turn, prevents precursor rRNA from entering the canonical processing pathway (35S > 20S + 27S > 18S + 25S + 5.8S rRNA). Nevertheless, at least some cleavage at the processing site in the second internal transcribed spacer takes place to form an unusual 24S intermediate, suggesting that cleavage at C2 is not blocked. Furthermore, the long form of 5.8S rRNA is made in the absence of RNase MRP activity, but only in the presence of Xrn1p (exonuclease 1), an enzyme not required for the canonical pathway. We conclude that RNase MRP is a key enzyme for initiating the canonical processing of precursor rRNA transcripts, but alternative pathway(s) might provide a backup for production of small amounts of rRNA.

  4. Solution processable RGO-CdZnS composite for solar light responsive photocatalytic degradation of 4-Nitrophenol

    Science.gov (United States)

    Ibrahim, Sk; Chakraborty, Koushik; Pal, Tanusri; Ghosh, Surajit

    2017-05-01

    We report the one pot single step synthesis and characterization of solution processable reduced graphene oxide (RGO) - cadmium zinc sulfide (CdZnS) nanocomposite materials. The composite was characterized structurally and morphologically by XRD and TEM studies. The reduction of GO in RGO-CdZnS composite, was confirmed by XPS and Raman spectroscopy. The photocatalytic activity of the RGO-CdZnS composite was investigated towards the degradation of 4-Nitrophenol. A notable increase of photocatalytic efficiency of RGO-CdZnS compare to controlled CdZnS was observed. Here RGO plays a crucial role to efficient photo induced charge separation from the CdZnS, and decreases the electron-hole recombination probability and subsequently enhanced the photocatalytic activity of the RGO-CdZnS composite material under simulated solar light irradiation. This work highlights the potential application of RGO-based materials in the field of photocatalytic degradation of organic water pollutant.

  5. Business Process Reengineering Of Funding On Indonesia’s Islamic Banks

    Directory of Open Access Journals (Sweden)

    Aslam Mei Nur Widigdo

    2016-02-01

    Full Text Available This research attempts to analyze the value chain of Islamic banking business processes and to develop a business processes model on depositors’ funds in order to improve the performance of Islamic banks. Four models of Islamic banking operating in Indonesia are used as the objects of the study. This research applies qualitative study (exploratory approach and utilizes primary data obtained from questionnaire and interviews. This data are then processed by value stream mapping and process activity mapping. This study shows that the waiting time for services is the sub-stage of business process that does not have value added and categorized as pure waste based on VSM criteria.The reengineering of business process of the third party fundraising may reduce collection time up to 1490 minutes for corporate customer and 22 minutes for individual customer.DOI: 10.15408/aiq.v8i1.2506

  6. SOT1, a pentatricopeptide repeat protein with a small MutS-related domain, is required for correct processing of plastid 23S-4.5S rRNA precursors in Arabidopsis thaliana.

    Science.gov (United States)

    Wu, Wenjuan; Liu, Sheng; Ruwe, Hannes; Zhang, Delin; Melonek, Joanna; Zhu, Yajuan; Hu, Xupeng; Gusewski, Sandra; Yin, Ping; Small, Ian D; Howell, Katharine A; Huang, Jirong

    2016-03-01

    Ribosomal RNA processing is essential for plastid ribosome biogenesis, but is still poorly understood in higher plants. Here, we show that SUPPRESSOR OF THYLAKOID FORMATION1 (SOT1), a plastid-localized pentatricopeptide repeat (PPR) protein with a small MutS-related domain, is required for maturation of the 23S-4.5S rRNA dicistron. Loss of SOT1 function leads to slower chloroplast development, suppression of leaf variegation, and abnormal 23S and 4.5S processing. Predictions based on the PPR motif sequences identified the 5' end of the 23S-4.5S rRNA dicistronic precursor as a putative SOT1 binding site. This was confirmed by electrophoretic mobility shift assay, and by loss of the abundant small RNA 'footprint' associated with this site in sot1 mutants. We found that more than half of the 23S-4.5S rRNA dicistrons in sot1 mutants contain eroded and/or unprocessed 5' and 3' ends, and that the endonucleolytic cleavage product normally released from the 5' end of the precursor is absent in a sot1 null mutant. We postulate that SOT1 binding protects the 5' extremity of the 23S-4.5S rRNA dicistron from exonucleolytic attack, and favours formation of the RNA structure that allows endonucleolytic processing of its 5' and 3' ends. © 2016 The Authors The Plant Journal © 2016 John Wiley & Sons Ltd.

  7. Organic contaminants degradation from the S(IV) autoxidation process catalyzed by ferrous-manganous ions: A noticeable Mn(III) oxidation process.

    Science.gov (United States)

    Zhang, Jiaming; Ma, Jun; Song, Haoran; Sun, Shaofang; Zhang, Zhongxiang; Yang, Tao

    2018-04-15

    Remarkable atrazine degradation in the S(IV) autoxidation process catalyzed by Fe 2+ -Mn 2+ (Fe 2+ /Mn 2+ /sulfite) was demonstrated in this study. Competitive kinetic experiments, alcohol inhibiting methods and electron spin resonance (ESR) experiments proved that sulfur radicals were not the major oxidation species. Mn(III) was demonstrated to be the primary active species in the Fe 2+ /Mn 2+ /sulfite process based on the comparison of oxidation selectivity. Moreover, the inhibiting effect of the Mn(III) hydrolysis and the S(IV) autoxidation in the presence of organic contaminants indicated the existence of three Mn(III) consumption routes in the Fe 2+ /Mn 2+ /sulfite process. The absence of hydroxyl radical and sulfate radical was interpreted by the competitive dynamics method. The oxidation capacity of the Fe 2+ /Mn 2+ /sulfite was independent of the initial pH (4.0-6.0) because the fast decay of S(IV) decreased initial pH below 4.0 rapidly. The rate of ATZ degradation was independent of the dissolved oxygen (DO) because that the major DO consumption process was not the rate determining step during the production of SO 5 •- . Phosphate and bicarbonate were confirmed to have greater inhibitory effects than other environmental factors because of their strong pH buffering capacity and complexing capacity for Fe 3+ . The proposed acetylation degradation pathway of ATZ showed the application of the Fe 2+ /Mn 2+ /sulfite process in the research of contaminants degradation pathways. This work investigated the characteristics of the Fe 2+ /Mn 2+ /sulfite process in the presence of organic contaminants, which might promote the development of Mn(III) oxidation technology. Copyright © 2018. Published by Elsevier Ltd.

  8. Political processes and variation in renewable energy policies between U.S. states

    Science.gov (United States)

    Vasseur, Michael

    Over the past forty years federal efforts at renewable energy policy in the United States have been fragmented and are largely stalled. This is much different from U.S. states, which enact a diverse array of renewable energy policies. What factors explain this subnational variation? Addressing this question requires moving past the standard model of binary policy adoption that dominates studies of renewable energy policy. In its place I provide analyses of multifaceted policy outcomes, and also include predictors from a more inclusive view of politics than the standard economic and political interest factors. These additions to the standard energy policy model shed light not just on when states take policy action, but also on the content of the policies states ultimately adopt. In this dissertation I argue that different combinations of state-level political and economic characteristics influence policy adoption and policy content, a fact that is obscured by analysis of only binary policy action. I demonstrate this through three empirical projects that utilize an original longitudinal dataset and a variety of quantitative methods. The first project examines the diffusion of two varieties of a single regulatory policy instrument within a political context. I demonstrate that, contrary to most diffusion studies, policy adoption should be thought of as a multifaceted process, with separate factors determining the impetus for action and others shaping the content of the policy. My second project examines the role of economic, political, institutional, and cultural factors on a state's portfolio of policies. This work extends findings from prior literature on tax policies and incorporates institutional and cultural accounts of policy adoption into the study of renewable energy policy. I show that state economic and political factors, the predictors in traditional energy policy models, predict policy action but not policy content. Instead it is a state's cultural context

  9. Microglia P2Y6 receptor is related to Parkinson’s disease through neuroinflammatory process

    Directory of Open Access Journals (Sweden)

    Xiaodong Yang

    2017-02-01

    Full Text Available Abstract Background Microglia in the central nervous system (CNS were reported to play crucial role in neurodegeneration. Previous studies showed that P2Y6 receptor (P2Y6R mainly contributed to microglia activation and phagocytosis in CNS. However, the level of P2Y6R in Parkinson’s disease (PD patients is unclear. Therefore, we measured the level of P2Y6R in PD patients and speculated whether it could be a potential biomarker for PD. Given on the basis that P2Y6R was higher in PD patients, we further explored the mechanisms underlying P2Y6R in the pathogenesis of PD. Methods We tested the expression level of P2Y6R in the peripheral blood mononuclear cells (PBMCs among 145 PD patients, 170 healthy controls, and 30 multiple system atrophy (MSA patients. We also used a lipopolysaccharide (LPS-stimulated microglial cell culture model to investigate (i the effects of LPS on P2Y6R expression with western blot and RT-PCR, (ii the effects of LPS on UDP expression using HPLC, (iii the effects of UDP/P2Y6R signaling on cytokine expression using western blot, RT-PCR, and ELISA, and (iv the signaling pathways activated by the P2Y6R involved in the neuroinflammation. Results Expression levels of P2Y6R in PD patients were higher than healthy controls and MSA patients. P2Y6R could be a good biomarker of PD. P2Y6R was also upregulated in LPS-treated BV-2 cells and involved in proinflammatory cytokine release through an autocrine loop based on LPS-triggered UDP secretion and accelerated neuroinflammatory responses through the ERK1/2 pathway. Importantly, blocking UDP/P2Y6R signaling could reverse these pathological processes. Conclusions P2Y6R may be a potential clinical biomarker of PD. Blocking P2Y6R may be a potential therapeutic approach to the treatment of PD patients through inhibition of microglia-activated neuroinflammation.

  10. Data on the synthesis processes optimization of novel β-NiS film modified CdS nanoflowers heterostructure nanocomposite for photocatalytic hydrogen evolution

    Directory of Open Access Journals (Sweden)

    Yu Zhang

    2018-02-01

    Full Text Available The data presented in this article are related to a research article entitled ‘Novel β-NiS film modified CdS nanoflowers heterostructure nanocomposite: extraordinarily highly efficient photocatalysts for hydrogen evolution’ (Zhang et al., 2018 [1]. In this article, we report original data on the synthesis processes optimization of the proposed nanocomposite on the basis of their optimum photocatalytic performance together with the comparison on the results of literatures and comparative experiments. The composition, microstructure, morphology, photocatalytic hydrogen evolution and photocatalytic stability of the corresponding samples are included in this report. The data are presented in this format in order to facilitate comparison with data from other researchers in the field and understanding the mechanism of similar catalysts. Keywords: NiS/CdS nanoflowers heterostructure, Photocatalysts, Water splitting, Hydrothermal synthesis, Optimization

  11. ‘Peace without women does not go!’ Women’s struggle for inclusion in Colombia’s peace process with the FARC

    Directory of Open Access Journals (Sweden)

    Lina M. Céspedes-Báez

    2018-04-01

    Full Text Available In this study, we analyze the tactics deployed by Colombian women’s rights NGOs, movements, and advocacy groups to challenge masculinism in the peace negotiations between the Colombian government and the former Colombian guerrilla Revolutionary Armed Forces (FARC held in Havana.1 By drawing on the literature on women’s participation in peace and transitional justice processes, the research assesses the presence of women in Colombia’s peace talks, the way women’s movements articulated their demands, the role of the sub-commission on gender, and the manner in which gender was introduced in the drafts of the peace agreement and in the document the parties to the negotiation signed in Cartagena in September 2016.

  12. Study on the performance of MoS2 modified PTFE composites by molding process

    Science.gov (United States)

    Ma, Weiqiang; Hou, Genliang; Bi, Song; Li, Ping; Li, Penghui

    2017-10-01

    MoS2 filled PTFE composites were prepared by cold pressing and sintering molding. The compressive and creep properties of composite materials were analyzed by controlling the size of molded composites during molding. The results show that the composites have the best compressive and creep resistance when the molding pressure is 55 MPa in the MoS2 composites with 15% mass fraction, which is a practical reference for the preparation of MoS2-modified PTFE composites.

  13. The unitarity defect of the S-matrix and statistical multistep direct nuclear processes

    International Nuclear Information System (INIS)

    Hussein, M.S.

    1986-09-01

    A relation is derived which connects the unitarity defect function S + S-1 with the imaginary part of the absorptive potential responsible for the nuclear scattering. The concept of angle-dependent reaction cross-section is introduced for the purpose. A similar relation is also obtained for the equivalent quantity S + -S -1 . Several applications to nucler scattering are made, and possible relevance of this unitarity defect relation to statistical coupled channels theories of preequilibrium reactions is pointed out and discussed. (Author) [pt

  14. U.S. Experience and practices associated with the use of centralized rad waste processing centers

    International Nuclear Information System (INIS)

    Gibson, James D.

    1994-01-01

    This paper presents the experience and current practices employed within the United States (US) associated with the use of Centralized Rad waste Processing Centers for the processing of Low Level Radioactive Wastes (LLRW). Information is provided on the methods, technologies, and practices employed by Scientific Ecology Group, Inc. (SEG), which is the worlds largest processor of LLRW. SEG processes over 80,000 cubic meters of waste annually and achieves an overall volume reduction of 12 : 1. LLRW processing in the United States is currently performed primarily at Centralized Rad waste Processing Centers, such as SEG's Central Volume Reduction Facility (CVRF) in Oak Ridge, Tennessee. This is primarily due to the superior economical application of advanced waste processing technologies, equipment, and personnel maintained at these centers. Information is provided on how SEG uses supercompaction, incineration, metals recycling, vitrification, and various other waste processing techniques to process both dry and wet wastes from over 90 commercial nuclear power plants, government operated facilities, hospitals, universities, and various small generators of radioactive waste

  15. Towards a Dialogic Understanding of Children's Art-Making Process

    Science.gov (United States)

    Kim, Hyunsu

    2018-01-01

    This article is intended to identify the complex process of children's art making by bringing new methodologies into the analysis of children's pictures. This article analyses the art-making process of a selected drawing by a five-year-old boy. The study builds on previous findings regarding children's verbal discourses during the art-making…

  16. The Inflation and it’s Stability in the Thermoforming Process

    DEFF Research Database (Denmark)

    Rasmussen, Henrik Koblitz; Eriksson, Torbjörn Gerhard

    2002-01-01

    The production process Thermoforming is normally used to produce different kinds of packing in plastic. The final stage in this process is the inflation of a flat (and thin) plate down into the wall of a mould. This creates the final shape of the product. The inflation is performed applying a gas...

  17. Silicon Photonics for Signal Processing of Tbit/s Serial Data Signals

    DEFF Research Database (Denmark)

    Oxenløwe, Leif Katsuo; Ji, Hua; Galili, Michael

    2012-01-01

    In this paper, we describe our recent work on signal processing of terabit per second optical serial data signals using pure silicon waveguides. We employ nonlinear optical signal processing in nanoengineered silicon waveguides to perform demultiplexing and optical waveform sampling of 1.28-Tbit/...

  18. The Place of Values in Counselling Process | O.S. | Nigerian Journal ...

    African Journals Online (AJOL)

    This study examined the place of value in counselling process. Counselling process is defined as the effortful steps taken to effect value oriented professional redirection of defective behaviour attributes in clients. In categorising the values, five typologies were identified. These are the values subsumed in nature as it ...

  19. Sub-national entities’ participation in Brazil’s foreign policy and in regional integration processes

    Directory of Open Access Journals (Sweden)

    Deisy Ventura

    2012-09-01

    Full Text Available This article focuses on how sub-national entities’ gradual participation in Brazilian foreign policy has come about, with reference to a decentralised scenario of the decision-making process in Itamaraty, where the ministries and presidential organs have a voice on many strategic themes, mainly concerning development. The article examines the insertion of sub-national entities into the decision-making process in the Southern Common Market (Mercosur, and concludes that in spite of the incipient participation, relevant contributions to the process of regional integration have arisen. Regarding the hypothesis that the participation of the federative entities in the decision-making process generates local and regional development, we argue that this is an alternative to increasing state efficiency. In conclusion, and despite the incipient institutionalisation that does not guarantee their vote in the decision-making process, at least their voice is heard.

  20. THEORETICAL AND PRACTICAL ASPECTS OF MONITORING OF REGION’S SOCIO-ECONOMIC DEVELOPMENT PROCESSES:

    Directory of Open Access Journals (Sweden)

    Valentyna Yakubiv

    2017-03-01

    Full Text Available The article defines the nature of socio-economic development processes monitoring in a region on the basis of systematization of scientific works on economics. The terms of monitoring introduction into the processes of socio-economic development of a region are defined. The difference between monitoring and standard statistic technology is explained. The fact that socio-economic processes monitoring is primarily directed at collection, examination and preparation of information for making and analyzing of economic decisions at different management levels is proved. The indicators by the direction “renewable energy and energy efficiency”, which are evaluated in the process of monitoring, are outlined. Major tasks of monitoring are defined and principles of its information basis forming are determined. Key words: decentralization, information basis, renewable energy, monitoring, region, development, socio-economic processes.

  1. Development of the NRC`s Human Performance Investigation Process (HPIP). Volume 3, Development documentation

    Energy Technology Data Exchange (ETDEWEB)

    Paradies, M.; Unger, L. [System Improvements, Inc., Knoxville, TN (United States); Haas, P.; Terranova, M. [Concord Associates, Inc., Knoxville, TN (United States)

    1993-10-01

    The three volumes of this report detail a standard investigation process for use by US Nuclear Regulatory Commission (NRC) personnel when investigating human performance related events at nuclear power plants. The process, called the Human Performance Investigation Process (HPIP), was developed to meet the special needs of NRC personnel, especially NRC resident and regional inspectors. HPIP is a systematic investigation process combining current procedures and field practices, expert experience, NRC human performance research, and applicable investigation techniques. The process is easy to learn and helps NRC personnel perform better field investigations of the root causes of human performance problems. The human performance data gathered through such investigations provides a better understanding of the human performance issues that cause events at nuclear power plants. This document, Volume III, is a detailed documentation of the development effort and the pilot training program.

  2. Minimally Invasive Microendoscopic Resection of the Transverse Process for Treatment of Low Back Pain with Bertolotti’s Syndrome

    Directory of Open Access Journals (Sweden)

    Yoichiro Takata

    2014-01-01

    Full Text Available Bertolotti’s syndrome is characterized by anomalous enlargement of the transverse process of the most caudal lumbar segment, causing chronic and persistent low back pain or sciatica. We describe the case of a 45-year-old woman who presented with left sciatic pain and low back pain due to a recurrent lumbar disc herniation at L4-5 with Bertolotti’s syndrome. Selective L5 nerve root block and local injection of lidocaine into the articulation between the transverse process and sacral ala temporarily relieved the left sciatic pain and low back pain, respectively. To confirm the effect of local injection on low back pain, we gave a second local injection, which once again relieved the low back pain. Microendoscopic resection of the pseudoarticulation region and discectomy successfully relieved all symptoms. This report illustrates the effectiveness of minimally invasive resection of the transverse process for the treatment of low back pain with Bertolotti’s syndrome.

  3. GALACTIC CHEMICAL EVOLUTION: THE IMPACT OF THE 13C-POCKET STRUCTURE ON THE s -PROCESS DISTRIBUTION

    International Nuclear Information System (INIS)

    Bisterzo, S.; Travaglio, C.; Wiescher, M.; Käppeler, F.; Gallino, R.

    2017-01-01

    The solar s -process abundances have been analyzed in the framework of a Galactic Chemical Evolution (GCE) model. The aim of this work is to implement the study by Bisterzo et al., who investigated the effect of one of the major uncertainties of asymptotic giant branch (AGB) yields, the internal structure of the 13 C pocket. We present GCE predictions of s -process elements computed with additional tests in the light of suggestions provided in recent publications. The analysis is extended to different metallicities, by comparing GCE results and updated spectroscopic observations of unevolved field stars. We verify that the GCE predictions obtained with different tests may represent, on average, the evolution of selected neutron-capture elements in the Galaxy. The impact of an additional weak s -process contribution from fast-rotating massive stars is also explored.

  4. Modelling phosphorus (P), sulfur (S) and iron (Fe) interactions for dynamic simulations of anaerobic digestion processes

    DEFF Research Database (Denmark)

    Flores Alsina, Xavier; Solon, Kimberly; Kazadi Mbamba, Christian

    2016-01-01

    (SSO4) reduction by XSRB and storage of XPHA by XPAO; and, (2) decrease of acetoclastic and hydrogenotrophic methanogenesis due to ZH2S inhibition. Model A3 shows the potential for iron to remove free SIS (and consequently inhibition) and instead promote iron sulfide (XFeS) precipitation. It also...

  5. Manufacturing processes of S-shaped temple rings from Vrbno, Central Bohemia

    Czech Academy of Sciences Publication Activity Database

    Ottenwelter, Estelle; Hošek, Jiří; Děd, J.; Štefan, I.

    2012-01-01

    Roč. 64, č. 3 (2012), s. 525-533 ISSN 0323-1267 Institutional research plan: CEZ:AV0Z80020508 Keywords : S-shaped temple rings * Early Middle Ages * Vrbno * tinning * gilding * silver plating Subject RIV: AC - Archeology, Anthropology, Ethnology

  6. China’s core executive Leadership styles, structures and processes under Xi Jinping

    NARCIS (Netherlands)

    Heilmann, S.; Stepan, M.

    2016-01-01

    Since Xi Jinping took the reins of the Chinese Communist Party and as President of the People’s Republic of China, the country’s domestic and foreign politics have undergone considerable changes. China has become more assertive as an international actor. It has launched new diplomatic initiatives

  7. Intertextual learning strategy with guided inquiry on solubility equilibrium concept to improve the student’s scientific processing skills

    Science.gov (United States)

    Wardani, K. U.; Mulyani, S.; Wiji

    2018-04-01

    The aim of this study was to develop intertextual learning strategy with guided inquiry on solubility equilibrium concept to enhance student’s scientific processing skills. This study was conducted with consideration of some various studies which found that lack of student’s process skills in learning chemistry was caused by learning chemistry is just a concept. The method used in this study is a Research and Development to generate the intertextual learning strategy with guided inquiry. The instruments used in the form of sheets validation are used to determine the congruence of learning activities by step guided inquiry learning and scientific processing skills with aspects of learning activities. Validation results obtained that the learning activities conducted in line with aspects of indicators of the scientific processing skills.

  8. Commercial Light Water Reactor -Tritium Extraction Facility Process Waste Assessment (Project S-6091)

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, R.H.; Delley, A.O.; Alexander, G.J.; Clark, E.A.; Holder, J.S.; Lutz, R.N.; Malstrom, R.A.; Nobles, B.R. [Westinghouse Savannah River Co., Aiken, SC (United States); Carson, S.D. [Sandia National Laboratories, New Mexico, NM (United States); Peterson, P.K. [Sandia National Laboratories, New Mexico, NM (United States)

    1997-11-30

    The Savannah River Site (SRS) has been tasked by the Department of Energy (DOE) to design and construct a Tritium Extraction Facility (TEF) to process irradiated tritium producing burnable absorber rods (TPBARs) from a Commercial Light Water Reactor (CLWR). The plan is for the CLWR-TEF to provide tritium to the SRS Replacement Tritium Facility (RTF) in Building 233-H in support of DOE requirements. The CLWR-TEF is being designed to provide 3 kg of new tritium per year, from TPBARS and other sources of tritium (Ref. 1-4).The CLWR TPBAR concept is being developed by Pacific Northwest National Laboratory (PNNL). The TPBAR assemblies will be irradiated in a Commercial Utility light water nuclear reactor and transported to the SRS for tritium extraction and processing at the CLWR-TEF. A Conceptual Design Report for the CLWR-TEF Project was issued in July 1997 (Ref. 4).The scope of this Process Waste Assessment (PWA) will be limited to CLWR-TEF processing of CLWR irradiated TPBARs. Although the CLWR- TEF will also be designed to extract APT tritium-containing materials, they will be excluded at this time to facilitate timely development of this PWA. As with any process, CLWR-TEF waste stream characteristics will depend on process feedstock and contaminant sources. If irradiated APT tritium-containing materials are to be processed in the CLWR-TEF, this PWA should be revised to reflect the introduction of this contaminant source term.

  9. Commercial Light Water Reactor -Tritium Extraction Facility Process Waste Assessment (Project S-6091)

    International Nuclear Information System (INIS)

    Hsu, R.H.; Delley, A.O.; Alexander, G.J.; Clark, E.A.; Holder, J.S.; Lutz, R.N.; Malstrom, R.A.; Nobles, B.R.; Carson, S.D.; Peterson, P.K.

    1997-01-01

    The Savannah River Site (SRS) has been tasked by the Department of Energy (DOE) to design and construct a Tritium Extraction Facility (TEF) to process irradiated tritium producing burnable absorber rods (TPBARs) from a Commercial Light Water Reactor (CLWR). The plan is for the CLWR-TEF to provide tritium to the SRS Replacement Tritium Facility (RTF) in Building 233-H in support of DOE requirements. The CLWR-TEF is being designed to provide 3 kg of new tritium per year, from TPBARS and other sources of tritium (Ref. 1-4).The CLWR TPBAR concept is being developed by Pacific Northwest National Laboratory (PNNL). The TPBAR assemblies will be irradiated in a Commercial Utility light water nuclear reactor and transported to the SRS for tritium extraction and processing at the CLWR-TEF. A Conceptual Design Report for the CLWR-TEF Project was issued in July 1997 (Ref. 4).The scope of this Process Waste Assessment (PWA) will be limited to CLWR-TEF processing of CLWR irradiated TPBARs. Although the CLWR- TEF will also be designed to extract APT tritium-containing materials, they will be excluded at this time to facilitate timely development of this PWA. As with any process, CLWR-TEF waste stream characteristics will depend on process feedstock and contaminant sources. If irradiated APT tritium-containing materials are to be processed in the CLWR-TEF, this PWA should be revised to reflect the introduction of this contaminant source term

  10. Children’s identification processes with television characters: case studies about colombian children and their favorite cartoon programs.

    Directory of Open Access Journals (Sweden)

    Luis Fernando Cuervo

    2013-12-01

    Full Text Available Through the articulation of psychoanalysis and narrative analysis this study explores the processes of identification of children audiences with their favorite cartoon television programs. In order to understand the characteristics of identification processes, this study explores the way in which both the structure of cartoons and the affective histories of children influence children’s identification with their favorite television characters. To achieve that understanding we a analyzed the narrative elements of the television programs, b explored the children’s affective history, and c examined how these narrative elements and affective histories influence the appropriation of television programs. These three scenarios were examined through case study on four Colombian children between 6 to 10 years old. The analysis showed that affective factors of children’s personal history constitute a significant source of mediation on the appropriation of cartoons. In addition, the narrative elements of the programs become an essential motivation on children’s fantasies.

  11. Removal of Acid Red 14 from Contaminated Water Using UV/S2O82- Advanced Oxidation Process

    Directory of Open Access Journals (Sweden)

    Mohammad Hossein Rasoulifard

    2012-10-01

    Full Text Available The present study investigates the degradation of Acid Red 14 (AR14, commonly used as a textile dye in aqueous medium through the oxidation process by UV /S2O82- under a set of variables concentration of S2O82-, Ag+, AR14 and temperature. Commonly Ag+, heat and UV light can excite S2O82− to sulfate radical form (SO4−•, a stronger oxidant (E0 = 2.60 V than S2O82−, to enhance significantly the oxidation of contaminants. Also the changes in the absorption spectra of AR14 solutions during the photoxidation process showed that decrease of absorption peak of the dye at λmax = 514 nm indicates a rapid degradation of the azo dye. The results of this study suggest that the oxidative treatment of AR14 by peroxydisulfate with UV is a viable option for removal of the textile dyes from effluents.

  12. Millisecond photo-thermal process on significant improvement of supercapacitor’s performance

    International Nuclear Information System (INIS)

    Wang, Kui; Wang, Jixiao; Wu, Ying; Zhao, Song; Wang, Zhi; Wang, Shichang

    2016-01-01

    Graphical abstract: A high way for charge transfer is created by a millisecond photo-thermal process which could decrease contact resistance among nanomaterials and improve the electrochemical performances. - Highlights: • Improve conductivity among nanomaterials with a millisecond photo-thermal process. • The specific capacitance can increase about 25% with an photo-thermal process. • The circle stability and rate capability can be improved above 10% with photo-thermal process. • Provide a new way that create electron path to improve electrochemical performance. - Abstract: Supercapacitors fabricated with nanomaterials usually have high specific capacitance and excellent performance. However, the small size of nanomaterials renders a considerable limitation of the contact area among nanomaterials, which is harmful to charge carrier transfer. This fact may hinder the development and application of nanomaterials in electrochemical storage systems. Here, a millisecond photo-thermal process was introduced to create a charge carries transfer path to decrease the contact resistance among nanomaterials, and enhance the electrochemical performance of supercapacitors. Polyaniline (PANI) nanowire, as a model nanomaterial, was used to modify electrodes under different photo-thermal process conditions. The modified electrodes were characterized by scanning electronic microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and the results were analysed by equivalent circuit simulation. These results demonstrate that the photo-thermal process can alter the morphology of PANI nanowires, lower the charge transfer resistances and thus improve the performance of electrodes. The specific capacitance increase of the modified electrodes is about 25%. The improvement of the circle stability and rate capability are above 10%. To the best of our knowledge, this is the first attempt on research the effect of photo-thermal process on the conductivity

  13. Physical processes in thin-film electroluminescent structures based on ZnS:Mn showing self-organized patterns

    International Nuclear Information System (INIS)

    Zuccaro, S.; Raker, Th.; Niedernostheide, F.-J.; Kuhn, T.; Purwins, H.-G.

    2003-01-01

    Physical processes in thin ZnS:Mn films and their relation to the formation of dynamical patterns in the electroluminescence of AC driven films are investigated. The technique of photo-depolarization-spectroscopy is used to investigate defect states in these films and it is shown that specific features in the spectra correlate with the observed self-organized patterns. Furthermore, the time dependence of the dissipative current is measured at the same samples and compared with current waveforms obtained from numerical simulations of a drift-diffusion model. The results are used to discuss the origin of the self-organized processes in ZnS:Mn-films

  14. Minimally Invasive Microendoscopic Resection of the Transverse Process for Treatment of Low Back Pain with Bertolotti’s Syndrome

    OpenAIRE

    Takata, Yoichiro; Sakai, Toshinori; Higashino, Kosaku; Goda, Yuichiro; Mineta, Kazuaki; Sugiura, Kosuke; Sairyo, Koichi

    2014-01-01

    Bertolotti’s syndrome is characterized by anomalous enlargement of the transverse process of the most caudal lumbar segment, causing chronic and persistent low back pain or sciatica. We describe the case of a 45-year-old woman who presented with left sciatic pain and low back pain due to a recurrent lumbar disc herniation at L4-5 with Bertolotti’s syndrome. Selective L5 nerve root block and local injection of lidocaine into the articulation between the transverse process and sacral ala tempor...

  15. A preliminary Analysis of Dörnyei and Otto’s Process Model of L2 Motivation

    Institute of Scientific and Technical Information of China (English)

    徐佳佳

    2015-01-01

    In the past few decades, motivation has already become a recurring topic in SLA field, where motivational theories have placed great influence on language teaching. Different from previous motivation theories, Dörnyei and Otto’s process model of L2 motivation focuses on the dynamicity of motivation.This paper aims at analyzing the process model of L2 motivation and proposing stimulation strategies for each phase to attain learning effect.

  16. A preliminary Analysis of Drnyei and Otto’s Process Model of L2 Motivation

    Institute of Scientific and Technical Information of China (English)

    徐佳佳

    2015-01-01

    In the past few decades, motivation has already become a recurring topic in SLA field, where motivational theories have placed great influence on language teaching.Different from previous motivation theories, Drnyei and Otto’s process model of L2 motivation focuses on the dynamicity of motivation.This paper aims at analyzing the process model of L2 motivation and proposing stimulation strategies for each phase to attain learning effect.

  17. Amplitude analysis for the process K-p→(π+π-)sub(s-wave)Σ0(1385)

    International Nuclear Information System (INIS)

    Barreiro, F.; Zalewski, K.; Aguilar-Benitez, M.; Hemingway, R.J.; Holmgren, S.O.; Losty, M.J.; Kluyver, J.G.; Massaro, G.G.G.; Timmermans, J.J.; Walle, R.T. van de

    1977-01-01

    Transversity amplitudes and spin density matrix elements are determined for the process K - p→(π + π - )sub(s-wave)Σ 0 (1385). Predictions of the additive quark model and of duality diagrams are tested and found consistent with the data; this is the first information about the applicability of these models to processes where a scalar object is produced at the mesonic vertex. (Auth.)

  18. Chemical evolution with rotating massive star yields - I. The solar neighbourhood and the s-process elements

    Science.gov (United States)

    Prantzos, N.; Abia, C.; Limongi, M.; Chieffi, A.; Cristallo, S.

    2018-05-01

    We present a comprehensive study of the abundance evolution of the elements from H to U in the Milky Way halo and local disc. We use a consistent chemical evolution model, metallicity-dependent isotopic yields from low and intermediate mass stars and yields from massive stars which include, for the first time, the combined effect of metallicity, mass loss, and rotation for a large grid of stellar masses and for all stages of stellar evolution. The yields of massive stars are weighted by a metallicity-dependent function of the rotational velocities, constrained by observations as to obtain a primary-like 14N behaviour at low metallicity and to avoid overproduction of s-elements at intermediate metallicities. We show that the Solar system isotopic composition can be reproduced to better than a factor of 2 for isotopes up to the Fe-peak, and at the 10 per cent level for most pure s-isotopes, both light ones (resulting from the weak s-process in rotating massive stars) and the heavy ones (resulting from the main s-process in low and intermediate mass stars). We conclude that the light element primary process (LEPP), invoked to explain the apparent abundance deficiency of the s-elements with A values of ^{12}C/^{13}C in halo red giants, which is rather due to internal processes in those stars.

  19. Simultaneous Range-Velocity Processing and SNR Analysis of AFIT’s Random Noise Radar

    Science.gov (United States)

    2012-03-22

    reducing the overall processing time. Two computers, equipped with NVIDIA ® GPUs, were used to process the col- 45 lected data. The specifications for each...gather the results back to the CPU. Another company , AccelerEyes®, has developed a product called Jacket® that claims to be better than the parallel...Number of Processing Cores 4 8 Processor Speed 3.33 GHz 3.07 GHz Installed Memory 48 GB 48 GB GPU Make NVIDIA NVIDIA GPU Model Tesla 1060 Tesla C2070 GPU

  20. “This one Grandma knew, too, exactly this one!” Processes of canonization in children’s music

    OpenAIRE

    Vestad, Ingeborg Lunde; Dyndahl, Petter

    2017-01-01

    Processes of musical canonization occur at different levels of culture and society. People have a strong propensity to categorize, differentiate, and evaluate the music that is important to them, and music is ascribed value in action by people in real-life settings. Based in these premises, the article discusses two questions: First, how does the idea of a canon of children’s music influence the daily musical activities and repertoires used in children’s day care facilities and family homes? ...

  1. Solution-Processed hybrid Sb2 S3 planar heterojunction solar cell

    Science.gov (United States)

    Huang, Wenxiao; Borazan, Ismail; Carroll, David

    Thin-film solar cells based on inorganic absorbers permit a high efficiency and stability. Among or those absorber candidates, recently Sb2S3 has attracted extensive attention because of its suitable band gap (1.5eV ~1.7 eV) , strong optical absorption, low-cost and earth-abundant constituents. Currently high-efficiency Sb2S3 solar cells have absorber layer deposited on nanostructured TiO2 electrodes in combination with organic hole transport material (HTM) on top. However it's challenging to fill the nanostructured TiO2 layer with Sb2S3 and subsequently by HTM, this leads to uncovered surface permits charge recombination. And the existing of Sb2S3/TiO2/HTM triple interface will enhance the recombination due to the surface trap state. Therefore, a planar junction cell would not only have simpler structure with less steps to fabricate but also ideally also have a higher open circuit voltage because of less interface carrier recombination. By far there is limited research focusing on planar Sb2S3 solar cell, so the feasibility is still unclear. Here, we developed a low-toxic solution method to fabricate Sb2S3 thin film solar cell, then we studied the morphology of the Sb2S3 layer and its impact to the device performance. The best device with a structure of FTO/TiO2/Sb2S3/P3HT/Ag has PCE over 5% which is similar or higher than yet the best nanostructure devices with the same HTM. Furthermore, based on solution engineering and surface modification, we improved the Sb2S3 film quality and achieved a record PCE. .

  2. Visuospatial processing in early Alzheimer’s disease: a multimodal neuroimaging study

    NARCIS (Netherlands)

    Jacobs, H.I.L.; Gronenschild, E. H. B. M.; Evers, E.A.T.; Ramakers, I.H.G.B.; Hofman, P.A.M.; Backes, W. H.; Jolles, J.; Verhey, F. R. J.

    2013-01-01

    Introduction: Dorsal pathway dysfunctions are thought to underlie visuospatial processing problems in Alzheimer disease (AD). Prior studies reported compensatory mechanisms in the dorsal or ventral pathway in response to these functional changes. Since functional and structural connectivity are

  3. NREL's Cyanobacteria Engineering Shortens Biofuel Production Process, Captures CO2

    Energy Technology Data Exchange (ETDEWEB)

    2015-09-01

    This highlight describes NREL's work to systematically analyze the flow of energy in a photosynthetic microbe and show how the organism adjusts its metabolism to meet the increased energy demand for making ethylene. This work successfully demonstrates that the organism could cooperate by stimulating photosynthesis. The results encourage further genetic engineering for the conversion of CO2 to biofuels and chemicals. This highlight is being developed for the September 2015 Alliance S&T Board meeting. biofuels and chemicals. This highlight is being developed for the September 2015 Alliance S&T Board meeting.

  4. A Model of the Molecular Aggregate Processes of Hemoglobin S. Absence of Cristallization

    Directory of Open Access Journals (Sweden)

    Carlos Cabal-Mirabal

    2008-01-01

    Full Text Available Aquí se propone un mecanismo y un modelo matemático. el modelo postula la existencia de microtúbulos defectivos formados por deoxihemoglobina S y oxihemoglobina S, y explica la dependencia de la polimerización de la concentración de hemoglobina, la temperatura y la presión parcial de oxígeno. El análisis hace énfasis en la polimerización de hemoglobina S en la ausencia de cristalización. La acción de otras clases de hemoglobinas en la formación molecular agregada puede ser explicada.

  5. INTRA-PROCESSOR PRICE-SPREAD BEHAVIOR: IS THE U.S. CATFISH PROCESSING INDUSTRY COMPETITIVE?

    OpenAIRE

    Hudson, Darren

    1998-01-01

    An analysis was conducted of price-spread behavior in the catfish-processing sector of the United States. A model of imperfect competition using conjectural variations was used to test for significant deviations from competition. Results show no significant deviation from competitive behavior, suggesting that catfish processor behave competitively. However, this result is limited by the assumption of equal market shares by each catfish-processing firm.

  6. Managing Service Development (SaaS) as a project: business process modeling

    OpenAIRE

    Iliadi, Vasiliki; Ηλιάδη, Βασιλική

    2017-01-01

    In the context of the present thesis, we will be studying core principles of Business Process Management, and how we can take advantage of them in combination with Project Management Methodologies and modeling tools in the context of Software as a Service businesses and their development. Initially we provide the reader with an introduction to Business Process Management, how it can be used, and how the life cycle is structured. We further define the first three phases of the life cycle to...

  7. Application of Statistical Process Control (SPC in it´s Quality control

    Directory of Open Access Journals (Sweden)

    Carlos Hernández-Pedrera

    2015-12-01

    Full Text Available The overall objective of this paper is to use the SPC to assess the possibility of improving the process of obtaining a sanitary device. As specific objectives we set out to identify the variables to be analyzed to enter the statistical control of process (SPC, analyze possible errors and variations indicated by the control charts in addition to evaluate and compare the results achieved with the study of SPC before and after monitoring direct in the production line were used sampling methods and laboratory replacement to determine the quality of the finished product, then statistical methods were applied seeking to emphasize the importance and contribution from its application to monitor corrective actions and support processes in production. It was shown that the process is under control because the results were found within established control limits. There is a tendency to be displaced toward one end of the boundary, the distribution exceeds the limits, creating the possibility that under certain conditions the process is out of control, the results also showed that the process being within the limits of quality control is operating far from the optimal conditions. In any of the study situations were obtained products outside the limits of weight and discoloration but defective products were obtained.

  8. Implementation Process of 5S for a Company in Real Life - Problems, Solutions, Successes

    Science.gov (United States)

    Czifra, György

    2017-09-01

    Developed in Japan, 5S is a system of organizing workplace for efficiency, effectiveness and safety. Is 5s important? The answer is: "YES", because the implementation is about empowering employees to control their work area and create an environment where they want to work every day. It is a program that only works with grass roots level engagement. With commitment to safety, we are equally committed to 5S to ensure a safe place to work. It enabled us to indicate where waste was occurring and thus improve the work area sustainably. We recognized real problems, found solutions and ultimately we were successful in our endeavors. Throughout different companies, various words of similar meaning are used. No matter what specific words are used to identify the steps in 5S, the purpose remains the same: create a clean, organized and efficient work environment.

  9. Engaging China in the International Export Control Process: Options for U.S. Policy

    National Research Council Canada - National Science Library

    Goldman, Charles

    1995-01-01

    This documented briefing is intended to provide options for U.S. policy that will enhance China's participation in the control of international transfers of destabilizing military or dual use technology...

  10. Foreign Assistance: U.S. Russia Fund Is Following Its Investment Selection Process and Criteria

    National Research Council Canada - National Science Library

    2000-01-01

    .... Enterprise funds are private, nonprofit U.S. corporations that are supposed to make loans to, or investments in, small-, medium-, and large-sized businesses in which other financial institutions are reluctant to invest...

  11. Implementation Process of 5S for a Company in Real Life - Problems, Solutions, Successes

    Directory of Open Access Journals (Sweden)

    Czifra György

    2017-09-01

    Full Text Available Developed in Japan, 5S is a system of organizing workplace for efficiency, effectiveness and safety. Is 5s important? The answer is: “YES”, because the implementation is about empowering employees to control their work area and create an environment where they want to work every day. It is a program that only works with grass roots level engagement. With commitment to safety, we are equally committed to 5S to ensure a safe place to work. It enabled us to indicate where waste was occurring and thus improve the work area sustainably. We recognized real problems, found solutions and ultimately we were successful in our endeavors. Throughout different companies, various words of similar meaning are used. No matter what specific words are used to identify the steps in 5S, the purpose remains the same: create a clean, organized and efficient work environment.

  12. Transforming Department of Defense’s Core Business Processes for Revolutionary Change

    Science.gov (United States)

    2015-01-01

    of experiences. He served as President and Chief Operating Officer of Medco Health Solutions until 2012. Mr. Klepper was recruited to Medco...billion. From 1995 to 2003 Mr. Klepper was an executive at Empire Blue Cross Blue Shield of New York, the nation’s largest Blue Cross franchise . He was...the first executive recruited to the CEO’s turnaround team to help the company recover from near bankruptcy. Within twelve months, financial

  13. JAEA’s R&D on the Thermochemical Hydrogen Production IS Process

    International Nuclear Information System (INIS)

    Kasahara, Seiji; Tanaka, Nobuyuki; Noguchi, Hiroki; Iwatsuki, Jin; Takegami, Hiroaki; Yan, Xing L.; Kubo, Shinji

    2014-01-01

    Japan Atomic Energy Agency (JAEA) has studied iodine-sulfur (IS) process, a thermochemical cycle to produce hydrogen by water splitting. This process is a candidate application of high temperature heat from high temperature gas-cooled reactors. This paper outlines the IS process study in JAEA, in particular recent situation of the R&D. Reactor components and a total process facility are tested to evaluate their integrity. A Bunsen reactor, a H_2SO_4 decomposer and a HI decomposer made of industrial materials such as SiC ceramic, fluoroplastic and lining materials have been examined separately as reactor components. A semibatch test and a thermal cycle test were operated in the Bunsen reactor. H_2SO_4 decomposition test is in a bayonet type reactor and HI decomposition test in an adiabatic radial flow type reactor are now under way. On the basis of a demonstration of continuous hydrogen production of 31 NL/h by a glass apparatus, an experimental apparatus of the total IS process has just been constructed to verify integrity of process components of industrial materials, H_2 production scale of which is 200 NL/h. Electro-electrodialysis (EED) cells to concentrate HI before distillation and a SiC-made bayonet type H_2SO_4 decomposer are applied in the facility. Process data of EED cells has been collected aiming to improve H_2 production thermal efficiency. Influence of temperature, composition in solution and existence of impurities on the cell properties has been investigated. Reduction of heat input to a HI separation step by applying the results of the study was shown. (author)

  14. Fission gas bubble identification using MATLAB's image processing toolbox

    Energy Technology Data Exchange (ETDEWEB)

    Collette, R. [Colorado School of Mines, Nuclear Science and Engineering Program, 1500 Illinois St, Golden, CO 80401 (United States); King, J., E-mail: kingjc@mines.edu [Colorado School of Mines, Nuclear Science and Engineering Program, 1500 Illinois St, Golden, CO 80401 (United States); Keiser, D.; Miller, B.; Madden, J.; Schulthess, J. [Nuclear Fuels and Materials Division, Idaho National Laboratory, P.O. Box 1625, Idaho Falls, ID 83415-6188 (United States)

    2016-08-15

    Automated image processing routines have the potential to aid in the fuel performance evaluation process by eliminating bias in human judgment that may vary from person-to-person or sample-to-sample. This study presents several MATLAB based image analysis routines designed for fission gas void identification in post-irradiation examination of uranium molybdenum (U–Mo) monolithic-type plate fuels. Frequency domain filtration, enlisted as a pre-processing technique, can eliminate artifacts from the image without compromising the critical features of interest. This process is coupled with a bilateral filter, an edge-preserving noise removal technique aimed at preparing the image for optimal segmentation. Adaptive thresholding proved to be the most consistent gray-level feature segmentation technique for U–Mo fuel microstructures. The Sauvola adaptive threshold technique segments the image based on histogram weighting factors in stable contrast regions and local statistics in variable contrast regions. Once all processing is complete, the algorithm outputs the total fission gas void count, the mean void size, and the average porosity. The final results demonstrate an ability to extract fission gas void morphological data faster, more consistently, and at least as accurately as manual segmentation methods. - Highlights: •Automated image processing can aid in the fuel qualification process. •Routines are developed to characterize fission gas bubbles in irradiated U–Mo fuel. •Frequency domain filtration effectively eliminates FIB curtaining artifacts. •Adaptive thresholding proved to be the most accurate segmentation method. •The techniques established are ready to be applied to large scale data extraction testing.

  15. Feasibility study of the anti pp → D{sub s}{sup -}D{sub s0}{sup *}(2317) process with PANDA

    Energy Technology Data Exchange (ETDEWEB)

    Prencipe, Elisabetta; Gillitzer, Albrecht; Ritman, James [Forschungszentrum Juelich IKP1, Juelich (Germany); Goetzen, Klaus [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany)

    2016-07-01

    Charm spectroscopy has recently gained renewed attention, due to confirmations and new observations published by LHCb. Despite of the excellent performance of the CERN experiments, still limitations exist, that do not allow to perform the measurement of the width (Γ) of narrow states with Γ ≤ 1 MeV. The measurement of the D{sub s0}{sup *}(2317) and the D{sub s1}(2460) width is a crucial point to discriminate among theoretical models, and to reveal their nature. One of the major advantage of the future PANDA experiment at FAIR is the excellent momentum beam resolution of about Δp/p=5 x 10{sup -5}, allowing energy scans with an energy resolution down to ΔE ∼ 26 keV. We present a method to measure the width of the D{sub s0}{sup *}(2317), and for the first time a complete full simulation performed with PandaRoot is shown. Feasibility studies for assumption of different signal cross sections are shown, to accommodate the incomplete experimental and theoretical knowledge of the corresponding process of interest. A proposal for a threshold scan for the production reaction anti pp → D{sub s}{sup -}D{sub s0}{sup *}(2317){sup +} in 100-keV-steps is presented, together with an estimate of the competitiveness of PANDA in this field, assuming an average luminosity of L=10{sup 31} cm{sup -1}s{sup -1}.

  16. Evaluation and Control of Mechanical Degradation of Austenitic Stainless 310S Steel Substrate During Coated Superconductor Processing

    Science.gov (United States)

    Kim, Seung-Gyu; Kim, Najung; Shim, Hyung-Seok; Kwon, Oh Min; Kwon, Dongil

    2018-05-01

    The superconductor industry considers cold-rolled austenitic stainless 310S steel a less expensive substitute for Hastelloy X as a substrate for coated superconductor. However, the mechanical properties of cold-rolled 310S substrate degrade significantly in the superconductor deposition process. To overcome this, we applied hot rolling at 900 °C (or 1000 °C) to the 310S substrate. To check the property changes, a simulated annealing condition equivalent to that used in manufacturing was determined and applied. The effects of the hot rolling on the substrate were evaluated by analyzing its physical properties and texture.

  17. Mass Media as Actor in Political Process: Evolution of the Western Approaches since the 1950s. (Part 1)

    OpenAIRE

    Гуторов, Владимир Александрович

    2013-01-01

    The author analyses evolution of western political science’s approaches to mass media and mass media’s role in political process in liberal democracies. The author focuses on theories of “Minimal Effect,” “Mediocracy,” “Effects Research,” “Tеxt Analysis,” “Use and Gratification Approach.” The author discusses A. Giddens’s structuration theory as the most elaborate approach to interpreting the role of mass media in the western political and social science.Key words: mass and political communic...

  18. Processing and characterization of new oxy-sulfo-telluride glasses in the Ge-Sb-Te-S-O system

    International Nuclear Information System (INIS)

    Smith, C.; Jackson, J.; Petit, L.; Rivero-Baleine, C.; Richardson, K.

    2010-01-01

    New oxy-sulfo-telluride glasses have been prepared in the Ge-Sb-Te-S-O system employing a two-step melting process which involves the processing of a chalcogenide glass (ChG) and subsequent melting with TeO 2 or Sb 2 O 3 . The progressive incorporation of O at the expense of S was found to increase the density and the glass transition temperature and to decrease the molar volume of the investigated oxy-sulfo-telluride glasses. We also observed a shift of the vis-NIR cut-off wavelength to longer wavelength probably due to changes in Sb coordination within the glass matrix and overall matrix polarizability. Using Raman spectroscopy, correlations have been shown between the formation of Ge- and Sb-based oxysulfide structural units and the S/O ratio. Lastly, two glasses with similar composition (Ge 20 Sb 6 S 64 Te 3 O 7 ) processed by melting the Ge 23 Sb 7 S 70 glass with TeO 2 or the Ge 23 Sb 2 S 72 Te 4 glass with Sb 2 O 3 were found to have slightly different physical, thermal, optical and structural properties. These changes are thought to result mainly from the higher moisture content and sensitivity of the TeO 2 starting materials as compared to that of the Sb 2 O 3 . - Graphical abstract: In this paper, we discuss our most recent findings on the processing and characterization of new ChG glasses prepared with small levels of Te, melted either with TeO 2 or Sb 2 O 3 powders. We explain how these new oxy-sulfo-telluride glasses are prepared and we correlate the physical, thermal and optical properties of the investigated glasses to the structure changes induced by the addition of oxygen in the Ge-Sb-S-Te glass network.

  19. Gamma radiation in the reduction of S almonella spp. inoculated on minimally processed watercress ( Nasturtium officinalis)

    Science.gov (United States)

    Martins, C. G.; Behrens, J. H.; Destro, M. T.; Franco, B. D. G. M.; Vizeu, D. M.; Hutzler, B.; Landgraf, M.

    2004-09-01

    Consumer attitudes towards foods have changed in the last two decades increasing requirements for freshlike products. Consequently, less extreme treatments or additives are being required. Minimally processed foods have freshlike characteristics and satisfy this new consumer demand. Besides freshness, the minimally processing also provide convenience required by the market. Salad vegetables can be source of pathogen such as Salmonella, Escherichia coli O157:H7, Shigella spp. The minimal processing does not reduce the levels of pathogenic microorganisms to safe levels. Therefore, this study was carried out in order to improve the microbiological safety and the shelf-life of minimally processed vegetables using gamma radiation. Minimally processed watercress inoculated with a cocktail of Salmonella spp was exposed to 0.0, 0.2, 0.5, 0.7, 1.0, 1.2 and 1.5 kGy. Irradiated samples were diluted 1:10 in saline peptone water and plated onto tryptic soy agar that were incubated at 37°C/24 h. D 10 values for Salmonella spp. inoculated in watercress varied from 0.29 to 0.43 kGy. Therefore, a dose of 1.7 kGy will reduce Salmonella population in watercress by 4 log 10. The shelf-life was increased by 1 {1}/{2} day when the product was exposed to 1 kGy.

  20. Self-assembly of tetrapod-shaped CdS nanostructures into 3D networks by a transverse growth process

    International Nuclear Information System (INIS)

    Fu Xiuli; Li Dan; Zhang Lei; Xiao Jinghua; Li Jiangyan; Peng Zhijian; Fang Zheyu

    2011-01-01

    Spontaneous formation of 3D tetrapod-shaped CdS nanostructure networks has been achieved for the first time by vapor diffusion-deposition growth from CdS powders. The growth mechanism of the hexagonal and preferentially oriented CdS tetrapod-shaped nanostructures is a combination of the classic vapor-liquid-solid and vapor-solid processes, and the formation of a 3D network results from the spontaneous growths along the longitudinal and across the axial directions of the primarily formed CdS nanorods. Micro-photoluminescence measurements and near-field scanning optical microscopy investigations show that the synthesized CdS tetrapod networks have an excellent luminescence property and can be used as an optical waveguide cavities in which the guided light can be extremely confined.

  1. THE TECHNOLOGY OF THE HYDROLYSİS PROCESS OF ALUMINA PRODUCTION FROM THE BAUXITES

    Directory of Open Access Journals (Sweden)

    Sami ŞAHİN

    2000-01-01

    Full Text Available The degree of growth level for many countries can be measured with their aluminum production and explatation rates. Ever though a great partion of aluminum hydroxide is turned into alumina still it has great merit. On the other hand, a large percentage of alumina is used in the aluminum production. The operation in the decomposition processes is referred to succinetly as hydrolysis process. Aluminum hydroxide is obtained from the aluminate solution. This production is named as hydrate and settled down which is proceded by filtration and finally sent to the calcination unit. Hydrolysis process is one of the most important stages in the production of alumina from bauxites. The ocovinence of hydrolysis reaction in a desirable manner is dependent on the factors that effect the reaction rate.

  2. Dynamic competition and enterprising discovery: Kirzner’s market process theory

    Directory of Open Access Journals (Sweden)

    Ahmet İhsan KAYA

    2011-12-01

    Full Text Available Market process theory is designed by the followers of Austrian School tradition as an alternative to neo-classic price theory in order to explain perceptible markets. Contrary to neo-classic economy which focuses on the concept of equilibrium, market process theory seeks to explore unequilibrium and direction to equilibrium. While doing so, the role of enterprenuer in dealing with limited information which is not taken into consideration in the price theory of neo-classic economy, uncertainty because of time and uncertainty which occurs in market underpins Israel Kirzner's analyses. In the study, Kirzner's competition and enterpreneurship theory is discussed with the contributions of Mises and Hayek. The study constitutes an introduction to market process theory of Kirzner.

  3. Implementation of the U.S. Environmental Protection Agency's Waste Reduction (WAR) Algorithm in Cape-Open Based Process Simulators

    Science.gov (United States)

    The Sustainable Technology Division has recently completed an implementation of the U.S. EPA's Waste Reduction (WAR) Algorithm that can be directly accessed from a Cape-Open compliant process modeling environment. The WAR Algorithm add-in can be used in AmsterChem's COFE (Cape-Op...

  4. Photonic Ultra-Wideband 781.25-Mb/s Signal Generation and Transmission Incorporating Digital Signal Processing Detection

    DEFF Research Database (Denmark)

    Gibbon, Timothy Braidwood; Yu, Xianbin; Tafur Monroy, Idelfonso

    2009-01-01

    The generation of photonic ultra-wideband (UWB) impulse signals using an uncooled distributed-feedback laser is proposed. For the first time, we experimentally demonstrate bit-for-bit digital signal processing (DSP) bit-error-rate measurements for transmission of a 781.25-Mb/s photonic UWB signal...

  5. Morphology and Precipitation Kinetics of MnS in Low-Carbon Steel During Thin Slab Continuous Casting Process

    Institute of Scientific and Technical Information of China (English)

    YU Hao; KANG Yong-lin; ZHAO Zheng-zhi; SUN Hao

    2006-01-01

    The morphology of manganese sulfide formed during thin slab continuous casting process in low-carbon steel produced by compact strip production (CSP) technique was investigated. Using transmission electron microscopy analysis, it was seen that a majority of manganese sulfides precipitated at austenite grain boundaries, the morphologies of which were spherical or close to the spherical shape and the size of MnS precipitates ranged from 30 nm to 100 nm. A mathematical model of the manganese sulfide precipitation in this process was developed based on classical nucleation theory. Under the given conditions, the starting and finishing precipitation temperatures of MnS in the continuous casting thin slab of the studied low-carbon steel are 1 189 ℃ and 1 171 ℃, respectively, and the average diameter of MnS precipitates is about 48 nm within this precipitation temperature range. The influences of chemical components and thermo-mechanical processing conditions on the precipitation behavior of MnS in the same process were also discussed.

  6. Synthesis and characterization of polyurethane/CdS-SiO 2 nanocomposites via ultrasonic process

    Science.gov (United States)

    Chen, Jing; Zhou, Yu-Ming; Nan, Qiu-Li; Ye, Xiao-Yun; Sun, Yan-Qing; Wang, Zhi-Qiang; Zhang, Shi-Ming

    2008-12-01

    In this study, the high-intensity ultrasound was applied in the preparation of chiral polyurethane/CdS-SiO 2 nanocomposites. The polyurethane/CdS-SiO 2 nanocomposites were analyzed by powder X-ray diffraction, thermogravimetric analysis (TGA), TEM and SEM. The results indicated that the heat stability of the nanocomposites was improved in the presence of CdS-SiO 2 core-shell nanoparticles. The infrared emissivity (8-14 μm) study revealed that the nanocomposites possessed much lower infrared values compared with those of the neat polymers and nanoparticles, respectively. A possible mechanism of ultrasonic induced composite reaction was proposed based on the experimental results.

  7. Synthesis and characterization of polyurethane/CdS-SiO2 nanocomposites via ultrasonic process

    International Nuclear Information System (INIS)

    Chen Jing; Zhou Yuming; Nan Qiuli; Ye Xiaoyun; Sun Yanqing; Wang Zhiqiang; Zhang Shiming

    2008-01-01

    In this study, the high-intensity ultrasound was applied in the preparation of chiral polyurethane/CdS-SiO 2 nanocomposites. The polyurethane/CdS-SiO 2 nanocomposites were analyzed by powder X-ray diffraction, thermogravimetric analysis (TGA), TEM and SEM. The results indicated that the heat stability of the nanocomposites was improved in the presence of CdS-SiO 2 core-shell nanoparticles. The infrared emissivity (8-14 μm) study revealed that the nanocomposites possessed much lower infrared values compared with those of the neat polymers and nanoparticles, respectively. A possible mechanism of ultrasonic induced composite reaction was proposed based on the experimental results.

  8. Children’s empathy in context: Individual abilities embedded in social processes

    NARCIS (Netherlands)

    Roerig, S.; van Wesel, F.; Evers, S.J.T.M.; Krabbendam, L.

    2015-01-01

    In neuropsychological and neuro-scientific research, empathy is often approached as an individual ability, whereas researchers in the field of anthropology focus on empathy as a dialectic process between two (or more) people. In our study we work as an interdisciplinary research team combining and

  9. The professional nurse\\'s experience of the dying process of the ...

    African Journals Online (AJOL)

    The increase in HIV/AIDS raises international concern. Statistics indicate that South Africa has the fastest increasing HIV-infection rate in the world. Secondary infections complicate the issues and could result in hospitalisation and death of terminal AIDS patients. Nurses are increasingly exposed to this process.

  10. Evaluation of treatment efficiency of processes for petroleum refinery`s wastewater

    Energy Technology Data Exchange (ETDEWEB)

    Kee, Kean Chin [National Univ. of Singapore, Kent Ridge (Singapore). Dept. of Civil Engineering

    1993-12-31

    Processes used in the treatment of a petroleum refinery wastewater included initial API oil separator to be followed by dissolved air flotation and extended aeration system. The use of extended aeration biological system proved to be an improvement but not a solution yet in such kind of treatment. 2 refs., 2 tabs.

  11. Processing and characterization of new oxysulfide glasses in the Ge-Ga-As-S-O system

    International Nuclear Information System (INIS)

    Maurel, C.; Petit, L.; Dussauze, M.; Kamitsos, E.I.; Couzi, M.; Cardinal, T.; Miller, A.C.; Jain, H.; Richardson, K.

    2008-01-01

    New oxysulfide glasses have been prepared in the Ge-Ga-As system employing a two-step melting process which involves the processing of the chalcogenide glass (ChG) and its subsequent melting with amorphous GeO 2 powder. Optical characterization of the synthesized oxysulfide glasses has shown that the cut-off wavelength decreases with increasing oxygen content, and this has been correlated to results of Raman and infrared (IR) spectroscopies which show the formation of new oxysulfide structural units. X-ray photoelectron spectroscopy (XPS) analysis to probe the bonding environment of oxygen atoms in the oxysulfide glass network, has revealed the preferred formation of Ga-O and Ge-O bonds in comparison to As-O bonds. This work has demonstrated that melting a ChG glass with GeO 2 leads to the formation of new oxysulfide glassy materials. - Graphical abstract: In this paper, we explain how new oxysulfide glasses are prepared in the Ge-Ga-As system employing a two-step process: (1) the processing of the chalcogenide glass (ChG) and (2) the re-melting of the ChG with GeO 2 powder. Raman, infrared and XPS spectroscopies show the formation of new oxysulfide structural units

  12. The Internationalization Process of the E-marketplace FoodIT A/S

    DEFF Research Database (Denmark)

    Rask, Morten

    that can handle a fast, broad and deep international expansion process with very limited resources. The case raises important questions as to the importance of physical presence for a dot.com firm selling digital products; products that in theory can be distributed digitally but in practice need...

  13. Stress Process of Illicit Drug Use among U.S. Immigrants' Adolescent Children: A Longitudinal Study

    Science.gov (United States)

    Choo, Hyekyung

    2012-01-01

    This study examined a full path model of stress process for predicting illicit drug use among Asian and Latino immigrants' adolescent children. Using 2-year longitudinal data (National Longitudinal Study of Adolescent Health) from a sample of adolescents with Asian or Latino immigrant parents (N = 2,353), the study explored structural…

  14. Bloom's Taxonomy: Improving Assessment and Teaching-Learning Process

    Science.gov (United States)

    Chandio, Muhammad Tufail; Pandhiani, Saima Murtaza; Iqbal, Rabia

    2016-01-01

    This research study critically analyzes the scope and contribution of Bloom's Taxonomy in both assessment and teaching-learning process. Bloom's Taxonomy consists of six stages, namely; remembering, understanding, applying, analyzing, evaluating and creating and moves from lower degree to the higher degree. The study applies Bloom's Taxonomy to…

  15. Evaluation of treatment efficiency of processes for petroleum refinery`s wastewater

    Energy Technology Data Exchange (ETDEWEB)

    Kee, Kean Chin [National Univ. of Singapore, Kent Ridge (Singapore). Dept. of Civil Engineering

    1994-12-31

    Processes used in the treatment of a petroleum refinery wastewater included initial API oil separator to be followed by dissolved air flotation and extended aeration system. The use of extended aeration biological system proved to be an improvement but not a solution yet in such kind of treatment. 2 refs., 2 tabs.

  16. Human Rights Education Here and Now: U.S. Practices and International Processes

    Science.gov (United States)

    Tibbitts, Felisa

    2014-01-01

    Felisa Tibbitts has spent the better part of her professional life in the field of human rights education. She remarks here that earlier in her career, as a U.S. national, she had been steeped in the language of civic education and peace education, but had not come across the term "human rights" and didn't initially understand (beyond a…

  17. Hong Kong and U.S. Teachers' Perceptions of Mathematical Disagreements and Their Resolution Processes

    Science.gov (United States)

    Barlow, Angela T.; Huang, Rongjin; Law, Huk-Yuen; Chan, Yip Cheung; Zhang, Qiaoping; Baxter, Wesley A.; Gaddy, Angeline K.

    2016-01-01

    Mathematical disagreements occur when students challenge each other's ideas related to a mathematical concept. In this research, we examined Hong Kong and U.S. elementary teachers' perceptions of mathematical disagreements and their resolutions using a video-stimulated survey. Participants were directed to give particular attention to the…

  18. 40-Gb/s all-optical processing systems using hybrid photonic integration technology

    NARCIS (Netherlands)

    Kehayas, E.; Tsiokos, D.; Bakapoulos, P.; Apostolopoulos, D.; Petrantonakis, D.; Stampoulidis, L.; Poustie, A.; McDougall, R.; Maxwell, G.D.; Liu, Y.; Zhang, S.; Dorren, H.J.S.; Seoane, J.; Van Holm-Nielsen, P.; Jeppesen, P.; Avramopoulos, H.

    2006-01-01

    This paper presents an experimental performance characterization of all-optical subsystems at 40 Gb/s using interconnected hybrid integrated all-optical semiconductor optical amplifier (SOA) Mach-Zehnder interferometer (MZI) gates and flip-flop prototypes. It was shown that optical gates can be

  19. Decomposition of Fertilizer Use Intensity and Its Environmental Risk in China’s Grain Production Process

    Directory of Open Access Journals (Sweden)

    Jie Cai

    2018-02-01

    Full Text Available In order to fully explore the fertilizer use intensity and its potential threats to the ecological environment, this paper has studied the decomposition of fertilizer use intensity and its environmental risk in China’s grain production. Based on the statistical data collected from 10 provinces during 2004–2015 in China’s grain producing areas, this paper has analyzed the effect of fertilizer use intensity from a regional perspective. The environmental risk assessment model considers some factors such as the fertilizer application safety thresholds use efficiency, multiple cropping index, and environmental impact weight. The fertilizer application safety thresholds are calculated on the target output of local food crops. The results show that: (1 during 2004–2015, the fertilizer use intensity shows an increasing trend in China’s grain producing areas, and the intensity is significantly higher than the upper limit of the international safety fertilization; (2 the cumulative contribution rate of the increase of fertilizer use intensity caused by regional fertilizer use efficiency and grain planting structure adjustment are 57.03% and 1.81% respectively; (3 in 2015, China’s grain producing areas’ environmental risk index of phosphorus and potash was low, with the values in these two provinces being quite different and indicating the characteristics of aggregation and distribution. Therefore, the Chinese government should unswervingly encourage the application of some technology that could save fertilizer and increase efficiency, establish environmental risk monitoring and control systems, and improve relevant policies and regulations.

  20. Lawmaking process and non-governmental stakeholders in China’s Antimonopoly Law

    DEFF Research Database (Denmark)

    Tang, Yi Shin

    2015-01-01

    The article provides a critical account of the political interests behind the enactment of China’s competition law and argues that, contrary to standard view, the influences of foreign and local stakeholders have been differently incorporated by local lawmakers, which resulted in a distinctive...

  1. A window on stochastic processes and gamma-ray cosmology through spectral and temporal studies of AGN observed with H.E.S.S

    International Nuclear Information System (INIS)

    Biteau, J.

    2013-01-01

    Fifty years after the discovery that quasars are extragalactic sources, their bright cores (AGN) and the jets that some of them exhibit still have plenty of secrets to share, particularly through observations in the gamma-ray band. Above 100 GeV, Cherenkov telescopes such as H.E.S.S. have detected 50 AGN, mostly blazars, objects whose jets are pointed toward the observer. The detection of two faint ones, 1ES 1312-423 and SHBL J001355.9-185406, is described in this thesis. Their multiwavelength spectra are reproduced with a synchrotron self-Compton model. The γ rays emitted by blazars are partly absorbed by the extragalactic background light (EBL), the second most intense cosmological background, which carries the integrated history of star formation. The first detection of this absorption above 100 GeV is performed, enabling the measurement of the EBL peak-amplitude in the optical band at the 20% level. In addition to these spectral studies, the fast flux-variations of blazars are investigated using the outbursts of PKS 2155-304 seen by H.E.S.S.. The observation of a skewed flux distribution and of an R.M.S.-flux correlation are interpreted within a kinematic model, where the emission is a realization of a stochastic process. (author)

  2. Neo Strategy to Use Fixed-Whiteboard Based on Student’s Thinking Process and Cultural Ethicaly in Learning Physics

    Directory of Open Access Journals (Sweden)

    Wahyu Hari Kristiyanto

    2017-08-01

    Full Text Available Old guidelines to use the whiteboard stated that teachers were not allowed to write on the whiteboard while talking, because unethical if speak while back facing students. Findings about thinking process profile in information processing were presented with a whiteboard showed that the assimilation process is going to be supported, and audio-visual stimulants. This paper aims to describe the implementation of the latest strategies to use fixed-whiteboard based on student’s thinking process in learning physics with maximum the optimal thought processes and also maintain cultural ethics. This research was conducted through the use of guideline development assessment implementation fixed-slates based on the findings of the process of thinking and ethical culture in physics learning. The results showed that the latest strategy the use of fixed-whiteboard based on the thought process students and ethical culture in learning physics are (1 the assimilation process so that the display contents whiteboard is a material that is correct and does not cause cognitive conflict, (2 they are mutually reinforcing a combination of visual and audio so that the need to write while spelling, and (3 the thinking process to the stage of internalization that stage of the emergence of good information text / image / formula can be seen intact by all students by writing not cover impressions. The implementation results show the subject has been able to implement the latest strategies use fixed-whiteboard with both categories. The conclusions of this study that the use of the latest strategies fixed-whiteboard can be used for the presentation of information which is more than usual for students according to their thinking process and also maintain cultural ethics. The implication of this research is for Workforce Education Institutions need to equip student teachers with the skills to use the whiteboard based on the latest strategy. How to CiteKristiyanto, W. H

  3. S O{sub 2} emission reduction through the use of the humid oxidation process

    Energy Technology Data Exchange (ETDEWEB)

    Fink, Jurgen [TIBRAS, Titanio do Brasil S.A., Salvador, BA (Brazil)

    1993-12-31

    The SO{sub 2} emission reduction unit to be installed in TIBRAS consists of six reactors supplied with activates carbon beds which will remove the SO{sub 2} (0.11 volume percent) contained in the residual gas (150.000 cubic meters per hour) produced in three rotary calciner kilns. The SO{sub 2} reacts with the water in the carbon pores forming diluted sulfuric acid. The activated carbon is fabricated from coke from peat. The weak H{sub 2} SO{sub 4} is reused in the titanium dioxide pigment process. This process is supposed to reduce TIBRAS SO{sub 2} emissions by 50 to 85 percent in addition to eliminating two stacks. 2 figs., 5 tabs.

  4. Raden Qosim’s Religious Humanism Approach of Javanese Islamization Process

    Directory of Open Access Journals (Sweden)

    Ahmad Wafi Muzakki

    2017-10-01

    Full Text Available This article explains the value of pepali pitu provided by Raden Qasim in the process of Javanese Islamization. In the era of XIV-XV massive change of life happens in Java island. It is influenced by Islamization process on big scale and the collapse of Majapahit Kingdom. One of the prominent figure of Javanese Islamization is Raden Qasim or well-known as Sunan Drajat, who is one of the member of Walisongo. Raden Qasim applies religious humanism theory as the approach. Religious humanism approach is implemented by pepali pitu theory. Pepali pitu is a theory which has purpose to lead human to achieve good value. Pepali pitu consists of Javanese life philosophy which is combined to Islamic value. The main concept of humanism religious approach is to form wise human being through the theory of self approval, social and spiritual.

  5. U.S. Department of Energy integrated manufacturing & processing predoctoral fellowships. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Petrochenkov, Margaret

    2003-03-31

    The objective of this program was threefold: to create a pool of PhDs trained in the integrated approach to manufacturing and processing, to promote academic interest in the field, and to attract talented professionals to this challenging area of engineering. It was anticipated that the program would result in the creation of new manufacturing methods that would contribute to improved energy efficiency, to better utilization of scarce resources, and to less degradation of the environment. Emphasis in the competition was on integrated systems of manufacturing and the integration of product design with manufacturing processes. Research addressed such related areas as aspects of unit operations, tooling and equipment, intelligent sensors, and manufacturing systems as they related to product design. This is the final report to close out the contract.

  6. S O{sub 2} emission reduction through the use of the humid oxidation process

    Energy Technology Data Exchange (ETDEWEB)

    Fink, Jurgen [TIBRAS, Titanio do Brasil S.A., Salvador, BA (Brazil)

    1994-12-31

    The SO{sub 2} emission reduction unit to be installed in TIBRAS consists of six reactors supplied with activates carbon beds which will remove the SO{sub 2} (0.11 volume percent) contained in the residual gas (150.000 cubic meters per hour) produced in three rotary calciner kilns. The SO{sub 2} reacts with the water in the carbon pores forming diluted sulfuric acid. The activated carbon is fabricated from coke from peat. The weak H{sub 2} SO{sub 4} is reused in the titanium dioxide pigment process. This process is supposed to reduce TIBRAS SO{sub 2} emissions by 50 to 85 percent in addition to eliminating two stacks. 2 figs., 5 tabs.

  7. PCM- data processing - description of the program TAPEDUMP for the computer HP-2100 S

    International Nuclear Information System (INIS)

    Ziegler, G.

    1978-01-01

    The assembler program TADEDUMP has the task, to preprocess PCM-data for further processing with a large computer and to put them in an output routine on magnetic tape with a measurement specific header. In the preprocessing the data can be reduced by selection and averaging. In the case of certain reading errors the data are discarded, but the synchronization is reestablished. (orig.) [de

  8. The conventional ammunition requirements determination process of the U.S. Navy.

    OpenAIRE

    Mawson, John III

    1985-01-01

    Approved for public release; distribution is unlimited The objective of this thesis is to analyze the Requirements Determination procedures in the Navy's Conventional Gun Ammunition System in an attempt to identify areas for potential improvement. The Conventional Gun Ammunition System involves a logical progression of steps initiated on an annual basis. The Secretary of Defense begins the process by issuing broad guidance for the development of documentation to support b...

  9. Neutron Capture Reactions on Fe and Ni Isotopes for the Astrophysical s-process

    Energy Technology Data Exchange (ETDEWEB)

    Lederer, C., E-mail: claudia.lederer@ed.ac.uk [University of Vienna, Faculty of Physics, 1090 Vienna (Austria); Johann-Wolfgang-Goethe Universität, 60438 Frankfurt (Germany); Giubrone, G. [Instituto de Física Corpuscular, CSIC-Universidad de Valencia, 46071 Valencia (Spain); Massimi, C. [Dipartimento di Fisica, Università di Bologna, and Sezione INFN di Bologna, 40100 Bologna (Italy); Žugec, P. [Department of Physics, Faculty of Science, University of Zagreb, 10002 Zagreb (Croatia); Barbagallo, M.; Colonna, N. [Istituto Nazionale di Fisica Nucleare, 70125 Bari (Italy); Domingo-Pardo, C. [Instituto de Física Corpuscular, CSIC-Universidad de Valencia, 46071 Valencia (Spain); Guerrero, C. [European Organization for Nuclear Research (CERN), CH-1211 Geneva (Switzerland); Gunsing, F. [Commissariat à l' Énergie Atomique (CEA) Saclay – Irfu, 91191 Gif-sur-Yvette (France); Käppeler, F. [Karlsruhe Institute of Technology, Campus Nord, Institut für Kernphysik, 76021 Karlsruhe (Germany); Tain, J.L. [Instituto de Física Corpuscular, CSIC-Universidad de Valencia, 46071 Valencia (Spain); Altstadt, S. [Johann-Wolfgang-Goethe Universität, 60438 Frankfurt (Germany); Andrzejewski, J. [Uniwersytet Łódzki, 90131 Lodz (Poland); Audouin, L. [Centre National de la Recherche Scientifique/IN2P3 – IPN, 91406 Orsay (France); Bécares, V. [Centro de Investigaciones Energeticas Medioambientales y Tecnológicas (CIEMAT), 28040 Madrid (Spain); Bečvář, F. [Faculty of Mathematics and Physics, Charles University, CZ-180 00 Prague (Czech Republic); and others

    2014-06-15

    Neutron capture cross sections in the keV neutron energy region are the key nuclear physics input to study the astrophysical slow neutron capture process. In the past years, a series of neutron capture cross section measurements has been performed at the neutron time-of-flight facility n{sub T}OF at CERN focussing on the Fe/Ni mass region. Recent results and future developments in the neutron time-of-flight technique are discussed.

  10. 'TISUCROMA': A Software for Color Processing of Biological Tissue's Images

    International Nuclear Information System (INIS)

    Arista Romeu, Eduardo J.; La Rosa Vazquez, Jose Manuel de; Valor, Alma; Stolik, Suren

    2016-01-01

    In this work a software intended to plot and analyze digital image RGB histograms from normal and abnormal regions of biological tissue. The obtained RGB histograms from each zone can be used to show the image in only one color or the mixture of some of them. The Software was developed in Lab View to process the images in a laptop. Some medical application examples are shown. (Author)

  11. Age-Dependent Positivity-Bias in Children’s Processing of Emotion Terms

    Science.gov (United States)

    Bahn, Daniela; Vesker, Michael; García Alanis, José C.; Schwarzer, Gudrun; Kauschke, Christina

    2017-01-01

    Emotions play an important role in human communication, and the daily-life interactions of young children often include situations that require the verbalization of emotional states with verbal means, e.g., with emotion terms. Through them, one can express own emotional states and those of others. Thus, the acquisition of emotion terms allows children to participate more intensively in social contexts – a basic requirement for learning new words and for elaborating socio-emotional skills. However, little is known about how children acquire and process this specific word category, which is positioned between concrete and abstract words. In particular, the influence of valence on emotion word processing during childhood has not been sufficiently investigated. Previous research points to an advantage of positive words over negative and neutral words in word processing. While previous studies found valence effects to be influenced by factors such as arousal, frequency, concreteness, and task, it is still unclear if and how valence effects are also modified by age. The present study compares the performance of children aged from 5 to 12 years and adults in two experimental tasks: lexical decision (word or pseudoword) and emotional categorization (positive or negative). Stimuli consisted of 48 German emotion terms (24 positive and 24 negative) matched for arousal, concreteness, age of acquisition, word class, word length, morphological complexity, frequency, and neighborhood density. Results from both tasks reveal two developmental trends: First, with increasing age children responded faster and more correctly, suggesting that emotion vocabulary gradually becomes more stable and differentiated during middle childhood. Second, the influence of valence varied with age: younger children (5- and 6-year-olds) showed significantly higher performance levels for positive emotion terms compared to negative emotion terms, whereas older children and adults did not. This age

  12. IMITATION STRATEGIES FOR SME’S LEARNING PROCESS TOWARDS INNOVATION STRATEGIES

    Directory of Open Access Journals (Sweden)

    Rina Sulistiyani

    2013-01-01

    The research results are as follow: the learning experience to use imitation strategy which covers stages of imitation, research, development and  creation. This learning process is the result of interaction between personal and behavior factors, as well as the enabler and barriers. The owners of leather small industries which leave the imitation strategy and switch to innovation strategy are craftsmen who have an entrepreneurial spirit. they are able to balance entrepreneurial and business aspects.

  13. Tailoring the Acquisition Process in the U.S. Department of Defense

    Science.gov (United States)

    2015-01-01

    the associate directors, Paul DeLuca and Marc Robbins , for their insightful com- ments on this research. xvii Abbreviations ADM Acquisition Decision...by the SASSA program. Of these six, one was judged as a neutral contribution while five were judged as helpful in achiev- ing the program goals. No...tailored processes were judged as nega- tive contributions to meeting the rapid space acquisitions goals. (Johnson, 2010, p. 4) Also in regard to SE

  14. Haze Gray Paint and the U.S. Navy: A Procurement Process Review

    Science.gov (United States)

    2017-12-01

    support of the fleet. The research encompasses both qualitative and quantitative analytical tools utilizing historical demand data for Silicone Alkyd...inventory level of 1K Polysiloxane in support of the fleet. The research encompasses both qualitative and quantitative analytical tools utilizing...process that can be adapted to other consumable or commodity- type items for future procurement efforts. E. METHODOLOGY The research relies on both

  15. Seeing the talker’s face supports executive processing of speech in steady state noise

    OpenAIRE

    Sushmit eMishra; Thomas eLunner; Thomas eLunner; Thomas eLunner; Stefan eStenfelt; Stefan eStenfelt; Jerker eRönnberg; Mary eRudner

    2013-01-01

    Listening to speech in noise depletes cognitive resources, affecting speech processing. The present study investigated how remaining resources or cognitive spare capacity (CSC) can be deployed by young adults with normal hearing. We administered a test of CSC (CSCT, Mishra et al., 2013) along with a battery of established cognitive tests to 20 participants with normal hearing. In the CSCT, lists of two-digit numbers were presented with and without visual cues in quiet, as well as in steady-st...

  16. Age-Dependent Positivity-Bias in Children’s Processing of Emotion Terms

    Directory of Open Access Journals (Sweden)

    Daniela Bahn

    2017-07-01

    Full Text Available Emotions play an important role in human communication, and the daily-life interactions of young children often include situations that require the verbalization of emotional states with verbal means, e.g., with emotion terms. Through them, one can express own emotional states and those of others. Thus, the acquisition of emotion terms allows children to participate more intensively in social contexts – a basic requirement for learning new words and for elaborating socio-emotional skills. However, little is known about how children acquire and process this specific word category, which is positioned between concrete and abstract words. In particular, the influence of valence on emotion word processing during childhood has not been sufficiently investigated. Previous research points to an advantage of positive words over negative and neutral words in word processing. While previous studies found valence effects to be influenced by factors such as arousal, frequency, concreteness, and task, it is still unclear if and how valence effects are also modified by age. The present study compares the performance of children aged from 5 to 12 years and adults in two experimental tasks: lexical decision (word or pseudoword and emotional categorization (positive or negative. Stimuli consisted of 48 German emotion terms (24 positive and 24 negative matched for arousal, concreteness, age of acquisition, word class, word length, morphological complexity, frequency, and neighborhood density. Results from both tasks reveal two developmental trends: First, with increasing age children responded faster and more correctly, suggesting that emotion vocabulary gradually becomes more stable and differentiated during middle childhood. Second, the influence of valence varied with age: younger children (5- and 6-year-olds showed significantly higher performance levels for positive emotion terms compared to negative emotion terms, whereas older children and adults did not

  17. Evaluating Adult’s Competency: Application of the Competency Assessment Process

    Directory of Open Access Journals (Sweden)

    Dominique Giroux

    2015-01-01

    Full Text Available Competency assessment of adults with cognitive impairment or mental illness is a complex process that can have significant consequences for their rights. Some models put forth in the scientific literature have been proposed to guide health and social service professionals with this assessment process, but none of these appear to be complete. A new model, the Competency Assessment Process (CAP, was presented and validated in other studies. This paper adds to this corpus by presenting both the CAP model and the results of a survey given to health and social service professionals on its practical application in their clinical practice. The survey was administered to 35 participants trained in assessing competency following the CAP model. The results show that 40% of participants use the CAP to guide their assessment and the majority of those who do not yet use it plan to do so in the future. A large majority of participants consider this to be a relevant model and believe that all interdisciplinary teams should use it. These results support the relevance of the CAP model. Further research is planned to continue the study of the application of CAP in healthcare facilities.

  18. Characterizing the Buyer Decision Process: the ZMOT model in Chile’s technology sector

    Directory of Open Access Journals (Sweden)

    Manuel Escobar Farfán

    2017-06-01

    Full Text Available This study presents an updated application model that identifies the intervening factors in the buyer decision process. In traditional research, the consumer is said to confront two moments of truth before making the decision to buy: first, when encountering the gondola, and then again while experiencing the product. Nevertheless, innovations in information technology have modified this traditional view to include the “Zero Moment of Truth”, known as ZMOT, a name popularized by Google. This analysis is based on the concept of the Zero Moment of Truth which relates to the process that consumers live prior to the purchase decision in which they gather information about the product or service. This study is justified by the absence of research on the ZMOT concept in Chile. To determine the factors involved in the purchase decision, a quantitative methodology was used, through the application of a survey that analyzed three perspectives: the influencing factors during the purchase decision, the activities carried out during the ZMOT, and, finally, the actions carried out after the completion of the purchase and information that will serve for future buyers is gathered. With the data obtained, an exploratory factor analysis was carried out, generating a preliminary multi-dimensional model to describe the factors in the buyer decision process during the information and experience gathering phase known as ZMOT.

  19. Photosynthesis: an interactive didactic model’s use to the learning and teaching process

    Directory of Open Access Journals (Sweden)

    Vanessa Liesenfeld

    2015-06-01

    Full Text Available Photosynthesis is a complex process that involves the implementation of several reactions which, many times, makes this content difficult for students to understand. The objective of this study was to investigate if an interactive didactic model, crafted with simple materials, could facilitate the understanding and learning of students on photosynthesis. Initially students of first year high school class from a public school Western of Paraná were asked to diagram what they knew about photosynthesis and respond to a questionnaire. It was concluded that many of the students’ prior concepts were general or inaccurate, such as the idea of photosynthesis being the process of respiration in plants, and O2 coming from the CO2, not from the photo-oxidation of water. These prior conceptions were important for planning the approach to the subject. The process of photosynthesis was then covered in lecture and dialogued, using the interactive didactic model to highlight the explanations. A new questionnaire was completed by the students, and concluded that the use of the interactive didactic model was efficient, since it helped to consolidate correct concepts and simultaneously, introduced new ones as well it shook the equivocal relations.

  20. Transformation Process Of Religious Believers Among Morocco’s Immigrant Women In Spain

    Directory of Open Access Journals (Sweden)

    Sarai Samper Sierra

    2014-11-01

    Full Text Available Moroccan migration towards Spain is every time more feminine. This fact is due to the growing number of single and divorced women who decide to emigrate on their own in order to find better working conditions. This new type of migration is led by urban women, with studies, who play an important economic rolle within their families, breaking therefore with the traditional restrictions on women’s mobility and their participation in the public space. These restrictions are, in Morocco’s case, integrated in a Muslim culture. The following paper tries to offer an approach to the social and economic changes that are in the origin of this new migration, as well as to the way in which these women reinterpret their sense of being Muslims and their Islamic beliefs after migrating to the Spanish society.

  1. The Interagency Process and America’s Second Front in the Global War on Terrorism

    Science.gov (United States)

    2003-04-01

    Environmental Factors Channel Interagency Dynamics”, NS Coursebook , AY 2003, Air Command and Staff College, Maxwell AFB, AL, p. 117. 4 Strategy Course, Lesson...Study of Airpower.” AP Coursebook , 2002, 2 3 History, USSOCOM, 15th Anniversary Edition, 16 April 2002, p. 83 4 Profile: Philippines, U.S...our infrastructure, both physical and information networks, from attack from terrorist groups that have already demonstrated their technical savvy

  2. Implementation of the Total Quality Leadership Process in U.S. Marine Corps Field Contracting Offices

    Science.gov (United States)

    1993-06-01

    8 b. Dr. Joseph M. Juran ... .......... 11 c. Dr. Kaoru Ishikawa .... .......... .. 13 2. TQM in the Department of Defense ..... ... 15 3. TQL in the...qualification, etc. [Ref. 8] 12 c. Dr. Kaoru Ishikawa Japan is often lauded as the world’s leader in the quality movement. To understand how the Japanese view the...34The Real Message of the Quality Movement: Building Learning Organizations", Journal for Quality and Participation, March 1992. 10. Ishikawa , Kaoru

  3. U.S. Budgeting for the United Nations: Process, Policy, and Problems

    Science.gov (United States)

    2009-06-01

    in the report, noting that loan guarantees in support of U.S. defense exports for UN peacekeeping operations or any other humanitarian assistance...Office of Management and Budget. (2009). Earmarks. Accessed February 2009: http://www.earmarks.omb.gov Ozmanczyk, E. J., & Mango , A. (Ed.) (2003...Pema THIS PAGE INTENTIONALLY LEFT BLANK i REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 Public reporting burden for this collection of

  4. Reforming The U.S. Security Assistance Export Process To Build Existing Capabilities

    Science.gov (United States)

    2015-12-01

    the USASAC leads the AMC Security Assistance Enterprise (ASAE), as well as cases associated with Foreign Military Sales (FMS) (Turner 2012, 5). The...reforms, excess defense articles, U.S. Army Security Assistance Command, Foreign Military Sales 15. NUMBER OF PAGES 73 16. PRICE CODE 17...Contract Audit Agency DCMA Defense Contract Management Agency DCS Direct Commercial Sales DELG Defense Export Loan Guarantee DISAM Defense

  5. The process of institutionalization-deinstitutionalization and children’s psychological adjustment in Rwanda:: Parents matter

    OpenAIRE

    Nsabimana, Epaphrodite; Martin-Sölch, Chantal

    2016-01-01

    Negative effects of institutionalization and positive effects of deinstitutionalization on children’s wellbeing have been well documented. However, the majority of reports on institutional care rely on adult interviews and there is a wide disparity of results and methodologies in few result-oriented studies of deinstitutionalization outcome. In addition, though all over the world, especially in developed countries, many children in orphanage have parents; little is known about on the effect o...

  6. Comparative study of the bioconversion process using R-(+)- and S-(-)-limonene as substrates for Fusarium oxysporum 152B.

    Science.gov (United States)

    Molina, Gustavo; Bution, Murillo L; Bicas, Juliano L; Dolder, Mary Anne Heidi; Pastore, Gláucia M

    2015-05-01

    This study compared the bioconversion process of S-(-)-limonene into limonene-1,2-diol with the already established biotransformation of R-(+)-limonene into α-terpineol using the same biocatalyst in both processes, Fusarium oxysporum 152B. The bioconversion of the S-(-)-isomer was tested on cell permeabilisation under anaerobic conditions and using a biphasic system. When submitted to permeabilisation trials, this biocatalyst has shown a relatively high resistance; still, no production of limonene-1,2-diol and a loss of activity of the biocatalyst were observed after intense cell treatment, indicating a complete loss of cell viability. Furthermore, the results showed that this process can be characterised as an aerobic system that was catalysed by limonene-1,2-epoxide hydrolase, had an intracellular nature and was cofactor-dependent because the final product was not detected by an anaerobic process. Finally, this is the first report to characterise the bioconversion of R-(+)- and S-(-)-limonene by cellular detoxification using ultra-structural analysis. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. Process

    Directory of Open Access Journals (Sweden)

    Eleanor T. Campbell

    2008-01-01

    Full Text Available El propósito de este estudio fue obtener una más clara comprensión del proceso de toma de decisiones en estudiantes de Enfermería que van a recibir su licenciatura, durante el cuidado de los pacientes. Se empleó un diseño descriptivo cualitativo, basado en preguntas abiertas semi-estructuradas, con el fin de recolectar información acerca de las decisiones, culturalmente diversas, tomadas por las estudiantes de Enfermería durante el cuidado de pacientes adultos, en una variedad de situaciones clínicas. Los temas que surgieron incluyen capacidad de comunicación, conocimiento, heroísmo, ansiedad y frustración. Los descubrimientos hallados indican que los estudiantes se propusieron metas en forma recíproca a todo lo largo del proceso de toma de decisiones. El autor empleó la teoría de la consecución de metas, de Imogene King, para interpretar los descubrimientos de este estudio y relacionar la teoría con la práctica. La toma de decisiones clínicas es un punto importante dentro de la educación y práctica de la Enfermería. La Facultad, entendiendo qué son los procesos de pensamiento, se anticipa con un diseño de estrategias específicas que refuerzan el razonamiento en la práctica clínica. Una parte de este proceso es ayudar a los estudiantes a salir de la dependencia que generan cuando quieren memorizar la información contenida en los textos, y hacerlos avanzar hacia la aplicación de los conceptos provenientes, tanto de las artes liberales, como de las ciencias biológicas y de Enfermería. Se trata de un especial desafío para las facultades y personal docente de Enfermería encargado de impartir educación a los estudiantes de la carrera, así como para el recién egresados de otras áreas de formación y de experiencia. Los resultados de estudios anteriores sobre toma de decisiones clínicas presentan conclusiones conflictivas e inconclusas, concernientes a determinadas consecuencias predecibles y otros factores

  8. Diversification of de-agrarianization? Income diversification, labor, and processes of agrarian change in southern and northern Malawi, mid-1930s to mid-1950s.

    Science.gov (United States)

    Green, Erik

    2008-01-01

    This article investigates the links between market-oriented activities and subsistence production among peasant farmers in the Thyolo and Mzimba districts in Malawi from the mid-1930s to the mid-1950s. The two districts were chosen because of their differences in terms of land-labor ratios, quality of soils, and structure of market engagement. Exploring the different paths of agrarian change in these two districts demonstrates that they were dependent on the structure of market engagement and its effects on the supply and flexibility of labor. African agricultural history is best understood when agricultural systems are viewed in connection to the overall economic activities of rural households. More simply put, the dynamics of agrarian change in rural Africa cannot be understood without linking such changes to the wider economy and their impact on local labor processes.

  9. Data on the synthesis processes optimization of novel β-NiS film modified CdS nanoflowers heterostructure nanocomposite for photocatalytic hydrogen evolution.

    Science.gov (United States)

    Zhang, Yu; Peng, Zhijian; Guan, Shundong; Fu, Xiuli

    2018-02-01

    The data presented in this article are related to a research article entitled 'Novel β-NiS film modified CdS nanoflowers heterostructure nanocomposite: extraordinarily highly efficient photocatalysts for hydrogen evolution' (Zhang et al., 2018) [1]. In this article, we report original data on the synthesis processes optimization of the proposed nanocomposite on the basis of their optimum photocatalytic performance together with the comparison on the results of literatures and comparative experiments. The composition, microstructure, morphology, photocatalytic hydrogen evolution and photocatalytic stability of the corresponding samples are included in this report. The data are presented in this format in order to facilitate comparison with data from other researchers in the field and understanding the mechanism of similar catalysts.

  10. Globalization process and its impact on Kosovo’s tourism development

    Directory of Open Access Journals (Sweden)

    MSc. Petrit Hasanaj

    2016-01-01

    Full Text Available Unlike modernization, globalization is a process somewhat independent from the will of its adhering participants. This thesis represents Robertson sociologist giving a description based on which capital, ideas and cultural codes, with the help of new communication tools, expand worldwide. With rapid development of media and mass electronic communications is eliminated the importance of space and leads to shrinking (narrowing of time and space which is a serious threat to national cultural identities. Fukuyama in his apology of liberal democracy warns "final political neutralization of nationalism" in terms of overall centralization and linguistic unity of the world.

  11. The Internationalization Process of the E-marketplace Autocom A/S

    DEFF Research Database (Denmark)

    Rask, Morten

    entry mode to foreign markets as foreign sales offices organized by local people with industry experiences. The case raises important questions of the importance of physical presence for a dot.com firm selling digital products; products that in theory can be distributed digitally but in practice needs...... foreigners employed at the Danish headquarter in order to handle a fast and broad international expansion process with limited resources involved. It was then recognized that this structure could not satisfy the needed concentration on the current foreign markets. Then Autocom identified the most suitable...

  12. The Internationalization Process of the E-marketplace Scanmarket A/S

    DEFF Research Database (Denmark)

    Rask, Morten

    The case describes the early internationalization process and the considerations about future international expansion of a successful e-marketplace where customers (doing reverse auctions) are the focus. Scanmarket was trying to find identify the most suitable entry modes; i.e. types of entry mod...... facing managers of dot.com firms. The case can be used in different types of teaching situations: (1) classroom discussions; (2) as an illustrative case applied to theoretical issues used in lectures; and (3) finally as the basis for examinations....

  13. Coastal biogeochemical processes in the north Indian Ocean (14, S-W)

    Digital Repository Service at National Institute of Oceanography (India)

    Naqvi, S.W.A.; Narvekar, P.V.; Desa, E.

    of the region are also shown with the numbers denoting the annual runoff in 10" m3. Due to the proximity to landmasses, the North Indian Ocean is probably af- fected by processes originating at the land-ocean boundary more than any other region. Lndeed... IN TIiE NORTH INDIAN OCEAN tion of contributions by the Indian oceanographic community, most of this infor- mation has been generated by scientists from countries outside this region under international efforts that started with the John Murray...

  14. Extreme robustness of scaling in sample space reducing processes explains Zipf’s law in diffusion on directed networks

    International Nuclear Information System (INIS)

    Corominas-Murtra, Bernat; Hanel, Rudolf; Thurner, Stefan

    2016-01-01

    It has been shown recently that a specific class of path-dependent stochastic processes, which reduce their sample space as they unfold, lead to exact scaling laws in frequency and rank distributions. Such sample space reducing processes offer an alternative new mechanism to understand the emergence of scaling in countless processes. The corresponding power law exponents were shown to be related to noise levels in the process. Here we show that the emergence of scaling is not limited to the simplest SSRPs, but holds for a huge domain of stochastic processes that are characterised by non-uniform prior distributions. We demonstrate mathematically that in the absence of noise the scaling exponents converge to −1 (Zipf’s law) for almost all prior distributions. As a consequence it becomes possible to fully understand targeted diffusion on weighted directed networks and its associated scaling laws in node visit distributions. The presence of cycles can be properly interpreted as playing the same role as noise in SSRPs and, accordingly, determine the scaling exponents. The result that Zipf’s law emerges as a generic feature of diffusion on networks, regardless of its details, and that the exponent of visiting times is related to the amount of cycles in a network could be relevant for a series of applications in traffic-, transport- and supply chain management. (paper)

  15. Japan's Siting Process for the Geological Disposal of High-level Radioactive Waste - An International Peer Review

    International Nuclear Information System (INIS)

    Brassinnes, Stephane; Fabbri, Olivier; Rubenstone, James; Seppaelae, Timo; Siemann, Michael; ); Kwong, Gloria; )

    2016-01-01

    The Nuclear Energy Agency carried out an independent peer review of Japan's siting process and criteria for the geological disposal of high-level radioactive waste in May 2016. The review concluded that Japan's site screening process is generally in accordance with international practices. As the goal of the siting process is to locate a site - that is both appropriate and accepted by the community - to host a geological disposal facility for high-level radioactive waste, the international review team emphasises in this report the importance of maintaining an open dialogue and interaction between the regulator, the implementer and the public. Dialogue should begin in the early phases and continue throughout the siting process. The international review team also underlines the importance of taking into account feasibility aspects when selecting a site for preliminary investigations, but suggests that it would be inappropriate to set detailed scientific criteria for nationwide screening at this stage. The team has provided extensive advisory remarks in the report as opportunities for improvement, including the recommendation to use clear and consistent terminology in defining the site screening criteria as it is a critical factor in a successful siting process. (authors)

  16. DANCE AND SHAMANISM: MITH-RITUALISTIC EDUCATIONAL PROCESS IN GUARANI’S EVERYDAY LIFE

    Directory of Open Access Journals (Sweden)

    Ana Luisa Menezes

    2008-06-01

    Full Text Available Este artigo busca desenvolver uma reflexão sobre a dança Guarani e o xamanismo, enfocando os aspectos mitológicos e ritualísticos dentro de um processo educativo e cotidiano. Na dança, a consciência da coletividade é vivenciada através do pensamento e do sentimento. A vivência provocada pelo coletivo na dança pode ser traduzida como nhandereté, corpo de todos, como divina e produtora de alegria. Nas intempéries do cotidiano, o Guarani produz beleza e alegria, porque são a expressão de suas identidades divinas. Através de conversas e depoimentos com os jovens Guaranis, buscou-se enfocar as elaborações feitas por estes, do conhecimento mitológico e da vivência cotidiana.O rito cumpre uma função vivificadora do mito e estes dois aspectos são percebidos como entrelaçados à dança e à Opy. Todos estes aspectos são vividos pelos jovens e adultos de uma forma muito inquietante que os levam à um movimento permanente de indagações, buscas e redefinições. Dentro desse processo, a Opy, o Karaí e a dança são destacadas como fundantes da cultura Guarani e servem como pontos de estabilização dentro de um cotidiano tão dinâmico. A dança, enquanto rito, transporta os Guaranis a um tempo de reconhecimento de suas identidades, de um ritmo de vida. O rito Guarani está ligado a uma estrutura profunda de organização coletiva emocional, dentro de uma função vital, de elevação espiritual e uma integração ao seu sistema de pertença. Para os Guaranis, Nhanderú ensinou a dança e mandou dançar a dança. Esta surge de uma percepção mitológica e o seu surgimento confunde-se com a própria existência Guarani. A espiritualidade nasce de uma relação vital, de movimento.A educação xamânica é apreendida pelos sentidos. A noção principal de conhecimento é o Arandurekó, conhecimento que se aprende ao longo da vida, num tempo-ritmo próprio. A dança-rito possibilita a conexão entre corpo e espírito, proporcionando

  17. Medal of Honor Award Process Review: U.S. Army Noncommissioned Officer Nominee (Redacted)

    Science.gov (United States)

    2016-05-04

    award the nominee the Silver Star. We determined Secretary McHugh acted within his authority when he decided to award the SS. We found no evidence...why the Honorable John M. McHugh , Secretary of the Army, downgraded the nominee’s MOH award recommendation to the Silver Star (SS).1 In a memorandum...valorous actions as documented in the MOH award 1 The Honorable John M. McHugh left his position as Secretary of the Army on November 1, 2015. 2 We did

  18. Overview of the U. S. flight safety process for space nuclear power

    International Nuclear Information System (INIS)

    Bennett, G.L.

    1981-01-01

    The two current types of nuclear power sources used in U. S. spacecraft are described along with the flight safety philosophies governing their use. In the case of radioisotope thermoelectric generators, the design philosophy consists of containment, immobilization, and recovery of the nuclear materials. For reactors, the emphasis is on maintaining a subcritical configuration in all credible accident environments. To document the safety activities, a safety analysis report is prepared for each mission. These reports, which are based on the probabilistic risk assessment methodology pioneered by the space nuclear safety community, are subjected to an interagency safety review before a recommendation is made to approve the launch of a nuclear-powered spacecraft

  19. Consumer’s Buying Decision-Making Process in E-Commerce

    OpenAIRE

    Budi Puspitasari Nia; Nugroho W P Susatyo; Nilan Amyhorsea Deya; Susanty Aries

    2018-01-01

    The e-commerce growth and development in Indonesia is very rapid as well as the internet grows, but it is not well-balanced with the number of online buying transaction which is still relatively low. Even the today’s biggest B2C e-commerce people in Indonesia, Lazada, has continually decreased online purchasing. This research is aimed to describe factors affecting online buying decision- making in the e-commerce Lazada. The type of this research is confirmatory research. The variable used is ...

  20. The 139La(n,gamma) cross section: key for the onset of the s process

    CERN Document Server

    Terlizzi, R.; Aerts, G.; Alvarez, H.; Alvarez-Velarde, F.; Andriamonje, S.; Andrzejewski, J.; Assimakopoulos, P.; Audouin, L.; Badurek, G.; Baumann, P.; Becvar, F.; Berthoumieux, E.; Calviani, M.; Calvino, F.; Cano-Ott, D.; Capote, R.; de Albornoz, A.Carrillo; Cennini, P.; Chepel, V.; Chiaveri, E.; Colonna, N.; Cortes, G.; Couture, A.; Cox, J.; Dahlfors, M.; David, S.; Dillmann, I.; Dolfini, R.; Domingo-Pardo, C.; Dridi, W.; Duran, I.; Eleftheriadis, C.; Embid-Segura, M.; Ferrant, L.; Ferrari, A.; Ferreira-Marques, R.; Fitzpatrick, L.; Frais-Koelbl, H.; Fujii, K.; Furman, W.; Gallino, R.; Goncalves, I.; Gonzalez-Romero, E.; Goverdovski, A.; Gramegna, F.; Griesmayer, E.; Guerrero, C.; Gunsing, F.; Haas, B.; Haight, R.; Heil, M.; Herrera-Martinez, A.; Igashira, M.; Isaev, S.; Jericha, E.; Kadi, Y.; Kappeler, F.; Karamanis, D.; Karadimos, D.; Kerveno, M.; Ketlerov, V.; Koehler, P.; Konovalov, V.; Kossionides, E.; Krticka, M.; Lamboudis, C.; Leeb, H.; Lindote, A.; Lopes, I.; Lozano, M.; Lukic, S.; Marganiec, J.; Marques, L.; Marrone, S.; Massimi, C.; Mastinu, P.; Mengoni, A.; Milazzo, P.M.; Moreau, C.; Mosconi, M.; Neves, F.; Oberhummer, H.; O'Brien, S.; Pancin, J.; Papachristodoulou, C.; Papadopoulos, C.; Paradela, C.; Patronis, N.; Pavlik, A.; Pavlopoulos, P.; Perrot, L.; Pignatari, M.; Plag, R.; Plompen, A.; Plukis, A.; Poch, A.; Pretel, C.; Quesada, J.; Rauscher, T.; Reifarth, R.; Rosetti, M.; Rubbia, C.; Rudolf, G.; Rullhusen, P.; Salgado, J.; Sarchiapone, L.; Savvidis, I.; Stephan, C.; Tagliente, G.; Tain, J.L.; Tassan-Got, L.; Tavora, L.; Vannini, G.; Vaz, P.; Ventura, A.; Villamarin, D.; Vincente, M.C.; Vlachoudis, V.; Vlastou, R.; Voss, F.; Walter, S.; Wendler, H.; Wiescher, M.; Wisshak, K.

    2007-01-01

    The nuclear resonance parameters and the capture cross section of the neutron magic isotope 139La has been measured n_TOF. The description of the experimental apparata is followed by the data analysis procedures. We extracted the resonance parameters, the main nuclear quantities such as the resonance integral, the average gamma widths for s- and p-waves, the nuclear level densities and the neutron strength functions. These results represent a signifcant improvement over previous data. The deduced Maxwellian-averaged capture cross sections are important for the interpretation of the most recent spectroscopic observations in low metallicity stars.

  1. NASA Standard for Models and Simulations (M and S): Development Process and Rationale

    Science.gov (United States)

    Zang, Thomas A.; Blattnig, Steve R.; Green, Lawrence L.; Hemsch, Michael J.; Luckring, James M.; Morison, Joseph H.; Tripathi, Ram K.

    2009-01-01

    After the Columbia Accident Investigation Board (CAIB) report. the NASA Administrator at that time chartered an executive team (known as the Diaz Team) to identify the CAIB report elements with Agency-wide applicability, and to develop corrective measures to address each element. This report documents the chronological development and release of an Agency-wide Standard for Models and Simulations (M&S) (NASA Standard 7009) in response to Action #4 from the report, "A Renewed Commitment to Excellence: An Assessment of the NASA Agency-wide Applicability of the Columbia Accident Investigation Board Report, January 30, 2004".

  2. A 1.5 Gb/s monolithically integrated optical receiver in the standard CMOS process

    Energy Technology Data Exchange (ETDEWEB)

    Xiao Xindong; Mao Luhong; Yu Changliang; Zhang Shilin; Xie Sheng, E-mail: xxd@tju.edu.c [School of Electronic Information Engineering, Tianjin University, Tianjin 300072 (China)

    2009-12-15

    A monolithically integrated optical receiver, including the photodetector, has been realized in Chartered 0.35 {mu}m EEPROM CMOS technology for 850 nm optical communication. The optical receiver consists of a differential photodetector, a differential transimpedance amplifier, three limiting amplifiers and an output circuit. The experiment results show that the receiver achieves an 875 MHz 3 dB bandwidth, and a data rate of 1.5 Gb/s is achieved at a bit-error-rate of 10{sup -9}. The chip dissipates 60 mW under a single 3.3 V supply. (semiconductor integrated circuits)

  3. A 1.5 Gb/s monolithically integrated optical receiver in the standard CMOS process

    International Nuclear Information System (INIS)

    Xiao Xindong; Mao Luhong; Yu Changliang; Zhang Shilin; Xie Sheng

    2009-01-01

    A monolithically integrated optical receiver, including the photodetector, has been realized in Chartered 0.35 μm EEPROM CMOS technology for 850 nm optical communication. The optical receiver consists of a differential photodetector, a differential transimpedance amplifier, three limiting amplifiers and an output circuit. The experiment results show that the receiver achieves an 875 MHz 3 dB bandwidth, and a data rate of 1.5 Gb/s is achieved at a bit-error-rate of 10 -9 . The chip dissipates 60 mW under a single 3.3 V supply. (semiconductor integrated circuits)

  4. “This one Grandma knew, too, exactly this one!” Processes of Canonization in Children’s Music

    Directory of Open Access Journals (Sweden)

    Ingeborg Lunde Vestad

    2017-09-01

    Full Text Available Processes of musical canonization occur at different levels of culture and society. People have a strong propensity to categorize, differentiate, and evaluate the music that is important to them, and music is ascribed value in action by people in real-life settings. Based in these premises, the article discusses two questions: First, how does the idea of a canon of children’s music influence the daily musical activities and repertoires used in children’s day care facilities and family homes? Second, in what ways is music legitimized in the everyday lives of children? Our data is collected by observation and interviews conducted in two pedagogical day care facilities and nine family homes. Children, day care staff and parents participated in the study. We find that a discussion of canonization in children’s music along the following four paths of legitimation is meaningful: the “good, old stuff,” the need for renewal, the inclusion of other types of music other than that aimed at a child audience, and the need for a wide array of genres and sentiments. Finally, we argue that although the legitimation and canonization in children’s music obviously involve considerations of musical aspects, separating these canonization processes from the prevailing socio-cultural ideas of childhood and children’s best interest is impossible.  

  5. Children’s and Adolescents’ Processing of Temporary Syntactic Ambiguity: An Eye Movement Study

    Directory of Open Access Journals (Sweden)

    Paul E. Engelhardt

    2014-01-01

    Full Text Available This study examined the eye movements of 24 children and adolescents as they read sentences containing temporary syntactic ambiguities. Prior research suggested that children primarily use grammatical information when making initial parsing decisions, and they tend to disregard semantic and contextual information. On each trial, participants read a garden path sentence (e.g., While the storm blew the boat sat in the shed, and, afterwards, they answered a comprehension question (e.g., Did the storm blow the boat?. The design was 2 × 2 (verb type × ambiguity repeated measures. Verb type was optionally transitive or reflexive, and sentences were ambiguous or unambiguous. Results showed no differences in first pass reading times at the disambiguating verb (e.g., sat. However, regressions did show a significant interaction. The unambiguous-reflexive condition had approximately half the number of regressions, suggesting less processing difficulty in this condition. Developmentally, we found that adolescents had significantly better comprehension, which seemed to be linked to the increased tendency to regress from the disambiguating word. Findings are consistent with the assumption that the processing architecture is more restricted in children compared to adolescents. In addition, results indicated that variance in ambiguity resolution was associated with interference control but not working memory.

  6. Parallel processing in the brain’s visual form system: An fMRI study

    Directory of Open Access Journals (Sweden)

    Yoshihito eShigihara

    2014-07-01

    Full Text Available We here extend and complement our earlier time-based, magneto-encephalographic (MEG, study of the processing of forms by the visual brain (Shigihara and Zeki, 2013 with a functional magnetic resonance imaging (fMRI study, in order to better localize the activity produced in early visual areas when subjects view simple geometric stimuli of increasing perceptual complexity (lines, angles, rhomboids constituted from the same elements (lines. Our results show that all three categories of form activate all three visual areas with which we were principally concerned (V1, V2, V3, with angles producing the strongest and rhomboids the weakest activity in all three. The difference between the activity produced by angles and rhomboids was significant, that between lines and rhomboids was trend significant while that between lines and angles was not. Taken together with our earlier MEG results, the present ones suggest that a parallel strategy is used in processing forms, in addition to the well-documented hierarchical strategy.

  7. Opportunities for Automated Demand Response in California’s Dairy Processing Industry

    Energy Technology Data Exchange (ETDEWEB)

    Homan, Gregory K. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Aghajanzadeh, Arian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McKane, Aimee [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-08-30

    During periods of peak electrical demand on the energy grid or when there is a shortage of supply, the stability of the grid may be compromised or the cost of supplying electricity may rise dramatically, respectively. Demand response programs are designed to mitigate the severity of these problems and improve reliability by reducing the demand on the grid during such critical times. In 2010, the Demand Response Research Center convened a group of industry experts to suggest potential industries that would be good demand response program candidates for further review. The dairy industry was suggested due to the perception that the industry had suitable flexibility and automatic controls in place. The purpose of this report is to provide an initial description of the industry with regard to demand response potential, specifically automated demand response. This report qualitatively describes the potential for participation in demand response and automated demand response by dairy processing facilities in California, as well as barriers to widespread participation. The report first describes the magnitude, timing, location, purpose, and manner of energy use. Typical process equipment and controls are discussed, as well as common impediments to participation in demand response and automated demand response programs. Two case studies of demand response at dairy facilities in California and across the country are reviewed. Finally, recommendations are made for future research that can enhance the understanding of demand response potential in this industry.

  8. Solution processable mixed-solvent exfoliated MoS2 nanosheets for efficient and robust organic light-emitting diodes

    Science.gov (United States)

    Liu, Chia-Wei; Wang, Chia; Liao, Chia-Wei; Golder, Jan; Tsai, Ming-Chih; Young, Hong-Tsu; Chen, Chin-Ti; Wu, Chih-I.

    2018-04-01

    We demonstrate the use of solution-processed molybdenum trioxide (MoO3) nanoparticle-decorated molybdenum disulfide (MoS2) nanosheets (MoS2/MoO3) as hole injection layer (HIL) in organic lighting diodes (OLEDs). The device performance is shown to be significantly improved by the introduction of such MoS2/MoO3 HIL without any post-ultraviolet-ozone treatment, and is shown to better the performance of devices fabricated using conventional poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) and MoO3 nanoparticle HILs. The MoS2/MoO3 nanosheets form a compact film, as smooth as PEDOT:PSS films and smoother than MoO3 nanoparticle films, when simply spin-coated on indium tin oxide substrates. The improvement in device efficiency can be attributed to the smooth surface of the nanostructured MoS2/MoO3 HIL and the excellent conductivity characteristics of the two-dimensional (2D) layered material (MoS2), which facilitate carrier transport in the device and reduce the sheet resistance. Moreover, the long-term stability of OLED devices that use such MoS2/MoO3 layers is shown to be improved dramatically compared with hygroscopic and acidic PEDOT:PSS-based devices.

  9. Solution processable mixed-solvent exfoliated MoS2 nanosheets for efficient and robust organic light-emitting diodes

    Directory of Open Access Journals (Sweden)

    Chia-Wei Liu

    2018-04-01

    Full Text Available We demonstrate the use of solution-processed molybdenum trioxide (MoO3 nanoparticle-decorated molybdenum disulfide (MoS2 nanosheets (MoS2/MoO3 as hole injection layer (HIL in organic lighting diodes (OLEDs. The device performance is shown to be significantly improved by the introduction of such MoS2/MoO3 HIL without any post-ultraviolet-ozone treatment, and is shown to better the performance of devices fabricated using conventional poly(3,4-ethylenedioxythiophene-poly(styrenesulfonate (PEDOT:PSS and MoO3 nanoparticle HILs. The MoS2/MoO3 nanosheets form a compact film, as smooth as PEDOT:PSS films and smoother than MoO3 nanoparticle films, when simply spin-coated on indium tin oxide substrates. The improvement in device efficiency can be attributed to the smooth surface of the nanostructured MoS2/MoO3 HIL and the excellent conductivity characteristics of the two-dimensional (2D layered material (MoS2, which facilitate carrier transport in the device and reduce the sheet resistance. Moreover, the long-term stability of OLED devices that use such MoS2/MoO3 layers is shown to be improved dramatically compared with hygroscopic and acidic PEDOT:PSS-based devices.

  10. 16S rRNA gene sequencing as a tool to study microbial populations in foods and process environments

    DEFF Research Database (Denmark)

    Buschhardt, Tasja; Hansen, Tina Beck; Bahl, Martin Iain

    2015-01-01

    communities in meat and the meat process environment with special focus on the Enterobacteriaceae family as a subpopulation comprising enteropathogens including Salmonella. Samples were analyzed by a nested PCR approach combined with MiSeq® Illumina®16S DNA sequencing and standardized culture methods as cross...... reference. Results: Taxonomic assignments and abundances of sequences in the total community and in the Enterobacteriaceae subpopulation were affected by the 16S rRNA gene variable region, DNA extraction methods, and polymerases chosen. However, community compositions were very reproducible when the same...

  11. Congenital defects of C1 arches and odontoid process in a child with Down′s syndrome: A case presentation

    Directory of Open Access Journals (Sweden)

    Catherine Hatzantonis

    2016-01-01

    Full Text Available We present the case of a 2-year-old child with Down′s syndrome who presented to our unit with torticollis. Imaging studies revealed the rare occurrence of anterior and posterior C1 arch defects, absent odontoid process, and atlantoaxial subluxation. We managed her conservatively for 3 years without neurological deficits or worsening of atlantoaxial subluxation. We discuss the rare occurrences of anterior and posterior arch defects of the atlas, the radiological presentations of axis defects in patients, and the occurrence of atlantoaxial instability in patients with Down′s syndrome. Management options with consideration to surgery in asymptomatic and symptomatic patients are also discussed.

  12. A Decision Making Account for the Cognitive Processing of Demorgan´S Laws

    Directory of Open Access Journals (Sweden)

    Razumiejczyk, Eugenia

    2010-07-01

    Full Text Available The aim of this contribution is to propose a preliminary account for the intuitive recognition of the logical equivalences attributed to Augustus DeMorgan. Such equivalences concerned with the negation of conjunctions and disjunctions have been previoulsy studied only in the context of syllogistic tasks, but not from the perspective of decision making. An on-line exploratory study was conducted to test two hypotheses. The first hypothesis states that DeMorgan´s law for the negation of conjunctions is easier to recognize than the corresponding law for the disjunctions case. The second hypothesis states that spontaneous errors in the recognition of DeMorgan´s laws follow a cognitive pattern. The results obtained for the first hypothesis suggest that the disjunctions case is more intuitive than the conjunctions case. An heuristic explanation for such unexpected result is suggested. The second hypothesis testing results suggest that the observed errors are not random. Suggestions for future research are proposed.

  13. Building v/s Exploring Models: Comparing Learning of Evolutionary Processes through Agent-based Modeling

    Science.gov (United States)

    Wagh, Aditi

    Two strands of work motivate the three studies in this dissertation. Evolutionary change can be viewed as a computational complex system in which a small set of rules operating at the individual level result in different population level outcomes under different conditions. Extensive research has documented students' difficulties with learning about evolutionary change (Rosengren et al., 2012), particularly in terms of levels slippage (Wilensky & Resnick, 1999). Second, though building and using computational models is becoming increasingly common in K-12 science education, we know little about how these two modalities compare. This dissertation adopts agent-based modeling as a representational system to compare these modalities in the conceptual context of micro-evolutionary processes. Drawing on interviews, Study 1 examines middle-school students' productive ways of reasoning about micro-evolutionary processes to find that the specific framing of traits plays a key role in whether slippage explanations are cued. Study 2, which was conducted in 2 schools with about 150 students, forms the crux of the dissertation. It compares learning processes and outcomes when students build their own models or explore a pre-built model. Analysis of Camtasia videos of student pairs reveals that builders' and explorers' ways of accessing rules, and sense-making of observed trends are of a different character. Builders notice rules through available blocks-based primitives, often bypassing their enactment while explorers attend to rules primarily through the enactment. Moreover, builders' sense-making of observed trends is more rule-driven while explorers' is more enactment-driven. Pre and posttests reveal that builders manifest a greater facility with accessing rules, providing explanations manifesting targeted assembly. Explorers use rules to construct explanations manifesting non-targeted assembly. Interviews reveal varying degrees of shifts away from slippage in both

  14. World's gas processing growth slows; U.S., Canada retain greatest share

    International Nuclear Information System (INIS)

    True, W.R.

    1994-01-01

    Growth in the world's natural-gas processing industry slowed somewhat in 1993 after strong expansion a year earlier. In 1993, slower growth was more evenly distributed among the world's regions than in 1992 with the US and Canada adding capacity along with the Middle East and Asia-Pacific. The US and Canada continue to lead the world in capacity with more than 107 bcfd; in throughput with almost 76 bcfd; and in production with nearly 115 million gpd (2.7 million b/d). The two countries also continued to lead the world in petroleum-derived sulfur production with more than 54% of the world's capacity and production last year. The paper discusses industry trends; the picture in the US; activities in Texas, Louisiana, Alaska, Alabama, Colorado, Kansas, and Oklahoma; new capacity worldwide; expansion plans in North America; and sulfur recovery

  15. Selecting the best rayon in customer’s perspective using fuzzy analytic hierarchy process

    Science.gov (United States)

    Sonjaya, E. G.; Paulus, E.; Hidayat, A.

    2018-03-01

    Annually, the best Rayon selection is conducted by the assessment team of PT.PLN (Persero) Cirebon with the goal to increase the spirit of company members in providing an improved service for customers. However, there is a problem in multiple criteria decision making in this case, which is the importance intensity of each criterion in the selection are often assessed subjectively. To solve this problem, Fuzzy Analytical Hierarchy Process are used to cover AHP scale deficiency in the form of ‘crisp’ numbers. So, it should be considered to use Fuzzy logic approach to handle uncertainty. Fuzzy approach, especially triangular fuzzy number towards AHP scale, are expected to minimize the handling of subjective input, which then will make a more objective result. Thus, this research was conducted to help the management or assessment team in the selection of the best Rayon with a more objective selection in according to the company criteria.

  16. THE ROLE OF THE INTERNAL AUDIT IN THE TOURISM UNIT’S RISK MANAGEMENT PROCESS

    Directory of Open Access Journals (Sweden)

    BOGDAN RĂVAŞ

    2011-01-01

    Full Text Available Management plans, organizes, and directs the performance of sufficient actions to provide reasonable assurance that objectives and goals will be achieved. Management periodically reviews its objectives and goals and modifies its processes to accommodate changes in internal and external conditions. Management also establishes and maintains an tourism unital culture, including an ethical climate that fosters control. Control is any action taken by management to enhance the likelihood that established objectives and goals will be achieved. Controls may be preventive (to determine undesirable events from occurring, detective (to detect and correct undesirable events which have occurred, or directive (to cause or encourage a desirable event to occur. The concept of a system of control is the integrated collection of control components and activities that are used by an tourism unit to achieve its objectives and goals.

  17. Occam’s Quantum Strop: Synchronizing and Compressing Classical Cryptic Processes via a Quantum Channel

    Science.gov (United States)

    Mahoney, John R.; Aghamohammadi, Cina; Crutchfield, James P.

    2016-02-01

    A stochastic process’ statistical complexity stands out as a fundamental property: the minimum information required to synchronize one process generator to another. How much information is required, though, when synchronizing over a quantum channel? Recent work demonstrated that representing causal similarity as quantum state-indistinguishability provides a quantum advantage. We generalize this to synchronization and offer a sequence of constructions that exploit extended causal structures, finding substantial increase of the quantum advantage. We demonstrate that maximum compression is determined by the process’ cryptic order-a classical, topological property closely allied to Markov order, itself a measure of historical dependence. We introduce an efficient algorithm that computes the quantum advantage and close noting that the advantage comes at a cost-one trades off prediction for generation complexity.

  18. Seeing the talker’s face supports executive processing of speech in steady state noise

    Directory of Open Access Journals (Sweden)

    Sushmit eMishra

    2013-11-01

    Full Text Available Listening to speech in noise depletes cognitive resources, affecting speech processing. The present study investigated how remaining resources or cognitive spare capacity (CSC can be deployed by young adults with normal hearing. We administered a test of CSC (CSCT, Mishra et al., 2013 along with a battery of established cognitive tests to 20 participants with normal hearing. In the CSCT, lists of two-digit numbers were presented with and without visual cues in quiet, as well as in steady-state and speech-like noise at a high intelligibility level. In low load conditions, two numbers were recalled according to instructions inducing executive processing (updating, inhibition and in high load conditions the participants were additionally instructed to recall one extra number, which was the always the first item in the list. In line with previous findings, results showed that CSC was sensitive to memory load and executive function but generally not related to working memory capacity. Furthermore, CSCT scores in quiet were lowered by visual cues, probably due to distraction. In steady-state noise, the presence of visual cues improved CSCT scores, probably by enabling better encoding. Contrary to our expectation, CSCT performance was disrupted more in steady-state than speech-like noise, although only without visual cues, possibly because selective attention could be used to ignore the speech-like background and provide an enriched representation of target items in working memory similar to that obtained in quiet. This interpretation is supported by a consistent association between CSCT scores and updating skills.

  19. Seeing the talker’s face supports executive processing of speech in steady state noise

    Science.gov (United States)

    Mishra, Sushmit; Lunner, Thomas; Stenfelt, Stefan; Rönnberg, Jerker; Rudner, Mary

    2013-01-01

    Listening to speech in noise depletes cognitive resources, affecting speech processing. The present study investigated how remaining resources or cognitive spare capacity (CSC) can be deployed by young adults with normal hearing. We administered a test of CSC (CSCT; Mishra et al., 2013) along with a battery of established cognitive tests to 20 participants with normal hearing. In the CSCT, lists of two-digit numbers were presented with and without visual cues in quiet, as well as in steady-state and speech-like noise at a high intelligibility level. In low load conditions, two numbers were recalled according to instructions inducing executive processing (updating, inhibition) and in high load conditions the participants were additionally instructed to recall one extra number, which was the always the first item in the list. In line with previous findings, results showed that CSC was sensitive to memory load and executive function but generally not related to working memory capacity (WMC). Furthermore, CSCT scores in quiet were lowered by visual cues, probably due to distraction. In steady-state noise, the presence of visual cues improved CSCT scores, probably by enabling better encoding. Contrary to our expectation, CSCT performance was disrupted more in steady-state than speech-like noise, although only without visual cues, possibly because selective attention could be used to ignore the speech-like background and provide an enriched representation of target items in working memory similar to that obtained in quiet. This interpretation is supported by a consistent association between CSCT scores and updating skills. PMID:24324411

  20. New neutron capture and total cross section measurements on 88Sr and their impact on s-process nucleosynthesis

    International Nuclear Information System (INIS)

    Koehler, P.E.; Spencer, R.R.; Guber, K.H.

    1998-01-01

    The authors have made new and improved measurements of the neutron capture and total cross sections of 88 Sr at the Oak Ridge Electron Linear Accelerator (ORELA). Improvements over previous measurements include a wider incident neutron energy range, the use of metallic rather than carbonate samples, better background subtraction, reduced sensitivity to sample-dependent backgrounds, and better pulse-height weighting functions. Because of its small cross section, the 88 Sr(n,γ) reaction is an important bottleneck during the s-process nucleosynthesis. Hence, an accurate determination of this rate is needed to better constrain the neutron exposure in s-process models and to more fully exploit the recently discovered isotopic anomalies in certain meteorites. They describe the experimental procedures, compare the results to previous data, and discuss their astrophysical impact

  1. The Legislative Process as a Safeguard of the Public Servant´S Right to Go on Strike

    Directory of Open Access Journals (Sweden)

    Edilene Lôbo

    2016-10-01

    Full Text Available The right to go on strike can only be realized after a specific national bill – such law has been denied for decades. Acknowledged the omission it should be remedied. The Supreme Court, nonetheless, declared the legislative gap but created, by analogy, rules and procedural issues, bestowing upon the remaining courts discretion to establish a stricter regime and erga omnes effect replacing the legislator. This work criticizes the right´s regulation through judicial rulings removed from the legislative process. The methodology utilized, supported by Estate´s  functions  separation  and  democratic  process  theories,  consisted  in  exam  of legislation, court rulings AND specialized literature.

  2. Dynamic stellar neutron-capture nucleosynthesis: the need for more nuclear data for the s-process

    International Nuclear Information System (INIS)

    Mathews, G.J.; Howard, W.M.; Takahashi, K.; Ward, R.A.

    1984-09-01

    We summarize results from a detailed parameter study of the s-process in models which produce an exponential distribution of exposures by sequential irradiations and dredge up in the stellar environment. The calculations are based on a complete network of measured and calculated neutron capture and beta-decay rates as well as estimates for their temperature dependence. In the framework of these models we identify and systematically vary the astrophysical variables which affect the observed solar-system sigmaN (cross section times abundance) curve. Constraints are placed on the s-process neutron exposure and flux as well as the temperatures, densities, neutron pulse shape and inter-pulse period. The results also highlight important needs for better nuclear data in various mass regions. 26 references

  3. Impact of Battery’s Model Accuracy on Size Optimization Process of a Standalone Photovoltaic System

    Directory of Open Access Journals (Sweden)

    Ibrahim Anwar Ibrahim

    2016-09-01

    Full Text Available This paper presents a comparative study between two proposed size optimization methods based on two battery’s models. Simple and complex battery models are utilized to optimally size a standalone photovoltaic system. Hourly meteorological data are used in this research for a specific site. Results show that by using the complex model of the battery, the cost of the system is reduced by 31%. In addition, by using the complex battery model, the sizes of the PV array and the battery are reduced by 5.6% and 30%, respectively, as compared to the case which is based on the simple battery model. This shows the importance of utilizing accurate battery models in sizing standalone photovoltaic systems.

  4. Electrical effects associated with the ordering process in CdInGaS4 crystals. 1

    International Nuclear Information System (INIS)

    Manolikas, C.; Anagnostopoulos, A.N.

    1983-01-01

    The structure and the domain structure of the ordered phase in the quaternary compound CdInGaS 4 are examined by using electron microscopy and the electron diffraction methods. It is found that a long-period APBs superstructure is formed after a long time of annealing at about 450 0 C and its origin is discussed on the basis of the assumption that mixing of Cd and Ga cations occurs within the layers of tetrahedral interstices. Heating of the former superstructure leads to disordering. Initially the periodic arrangement of the APBs is disordered; the ordering of the cations is conserved however. At even higher temperature the disordering is extended over the cations themselves as well. (author)

  5. Influence of Social and Cultural Expenses on the Population’s Pauperization Process

    Directory of Open Access Journals (Sweden)

    Luminiţa Maria Crăciun

    2009-10-01

    Full Text Available Eradication of poverty and economic development are essential for a durable development. High access to production resources and theactivity of effective public institutions are the most important conditions for the fight against poverty. Public and private investments in education,health care and social programs are indispensable for offering market economy integration opportunities to the paupers and to contribute to aneconomic development for everyone’s benefit. The satisfaction of social needs, aiming the improvement of life conditions for each person in a givensociety, defines an aspect of the importance of public expenses. (Economy dictionary, 1999 The amount of public expenses allocated for socioculturalactions has an essential economic and social role and has effect on the education, the professional training and qualification, the cultural,artistic and civilisation level, the quality of medical assistance and infant mortality, the system of social protection.

  6. THE TECHER’S PERSONALITY – FUNDAMENTAL CONDITION IN THE UNIVERSITY INSTRUCTIVE-EDUCATIONAL PROCESS

    Directory of Open Access Journals (Sweden)

    COMENDANT TATIANA

    2015-12-01

    Full Text Available In the contemporary system of education, one of the main indicators that traces the reform of European higher education is based on teaching centred on the student. For carrying out the instructive-educational activities there are three factors that have a determining role: the university students, the teaching staff and the higher education institution. The article emphasizes the teacher’s personality. The author considers the problem of the quality of studies based on a new type of organizing university education and proposes new ways of obtaining progress in education presented in the items of the PDCA cycle. Emphasis is laid on the formative-informative aspect of the agents involved in education – teacher-student and the role played by them in the university environment.

  7. Organizing the collection and automated processing of information about oil pollution of the world's oceans

    Energy Technology Data Exchange (ETDEWEB)

    Mikhaylov, V.A.; Surago, A.V.

    1983-01-01

    A system is examined for collecting, testing, storing and processing of data about pollution of the world's ocean by oil within the MOK-VMO test project on a computer (EVM). Forms for recording the results of observations and analysis in the form of an observation log for each form of oil pollution are cited. A description is given of the operation of the system.

  8. Redesign of students’ worksheet on basic physics experiment based on students’ scientific process skills analysis in Melde’s law

    Science.gov (United States)

    Nugraha, M. G.; Utari, S.; Saepuzaman, D.; Nugraha, F.

    2018-05-01

    Scientific process skills (SPS) are an intellectual skill to build knowledge, solve problems scientifically, train thinking skills as well as a very important part of the inquiry process and contribute to scientific literacy. Therefore, SPS is very important to be developed. This study aims to develop Student Worksheets (SW) that can trace SPS through basic physics experiments (BPE) on Melde’s law. This research uses R&D method involving 18 physics education department students who take the BPE course as a sample. The research instrument uses an SW designed with a SPS approach that have been reviewed and judged by expert, which includes observing, communicating, classifying, measuring, inferring, predicting, identifying variable, constructing hypothesis, defining variable operationally, designing experiment, acquiring and processing data to conclusions. The result of the research shows that the student’s SPS has not been trained optimally, the students’ answers are not derived from the observations and experiments conducted but derived from the initial knowledge of the students, as well as in the determination of experimental variables, inferring and hypothesis. This result is also supported by a low increase of conceptual content on Melde’s law with n-gain of 0.40. The research findings are used as the basis for the redesign of SW.

  9. Corporate governance structure which is based in the S&OP process: Case study in la Brazilian cosmetic company

    Directory of Open Access Journals (Sweden)

    Ximena Rojas

    2014-03-01

    Full Text Available (Received: 2014/01/31 - Accepted: 2014/03/25This article is about the generation of a corporate governance structure which is based in the process S&OP for a Brazilian cosmetic industry. The increasing emphasis on business development guided by attention to the requirements and demands of customers, cause nowadays, that the organizations of the commercial sectors work in the creation of a competitive differential. The collaborative business management strategy S&OP is looking for the attention of people who are interested in the improvement of their skills; in order to achieve this differential. With the case study methodology, the objectives are to get knowledge, identify, and analyze the characteristics of the company using analysis tools like SWOT, process analysis, value chain. All with the purpose to get a robust management tool that fits with the requirements and demands of the organization. The analyzed results showed that the principles of collaboration and internal communication were the pillars necessary against any attempt of business development. This supports the proposal of a management structure based on the five step S&OP process. As a complement to this study a methodology CPFR was identified as the platform for an integrated work with the rest of the companies of the supply chain.

  10. A strategy of combining SILAR with solvothermal process for In2S3 sensitized quantum dot-sensitized solar cells

    International Nuclear Information System (INIS)

    Yang, Peizhi; Tang, Qunwei; Ji, Chenming; Wang, Haobo

    2015-01-01

    Graphical abstract: - Highlights: • In 2 S 3 sensitized TiO 2 anode is prepared by combining SILAR with solvothermal process. • The deposition cycle in SILAR process has an impact on cell performances. • A promising conversion efficiency of 1.39% is obtained for the optimal device. • The cell performances are markedly increased compared with SILAR technique. - Abstract: Pursuit of an efficient strategy for quantum dot-sensitized photoanode has been a persistent objective for enhancing photovoltaic performances of quantum dot-sensitized solar cell (QDSC). We present here the fabrication of the indium sulfide (In 2 S 3 ) quantum dot-sensitized titanium dioxide (TiO 2 ) photoanode by combining successive ionic layer adsorption and reaction (SILAR) with solvothermal processes. The resultant QDSC consists of an In 2 S 3 sensitized TiO 2 photoanode, a liquid polysulfide electrolyte, and a Co 0.85 Se counter electrode. The optimized QDSC with photoanode prepared with the help of a SILAR method at 20 deposition cycles and solvothermal method yields a maximum power conversion efficiency of 1.39%.

  11. Critically designing today’s melt processed bulk magnesium alloys using boron rich nanoparticles

    International Nuclear Information System (INIS)

    Paramsothy, Muralidharan; Gupta, Manoj

    2015-01-01

    Highlights: • B 4 C nanoparticles increased the tensile ductility of Mg–Al alloy to about 25%. • SiB 6 nanoparticles increased the tensile ductility of Mg–Zn alloy to about 23%. • ZrB 2 nanoparticles increased the tensile strength of Mg–RE alloy to above 400 MPa. • Hypothetically, 5–10% cold working could significantly increase tensile strength. • Hypothetically, 5–10% cold working could maintain tensile ductility above 10%. - Abstract: In this work, boron rich nanoparticles (B 4 C, SiB 6 and ZrB 2 ) were added to bulk melt processed Mg–Al, Mg–Zn and Mg–RE (Rare Earth) series contemporary magnesium alloys, respectively. The most obvious positive effect when adding B 4 C nanoparticles to the Mg–Al alloy was the significant increase in tensile ductility (to about 25%). Here, there was no significant change in grain size or crystallographic texture due to nanoparticle addition. However, it was observed that stacking faults formed more easily in the magnesium matrix due to nanoparticle addition. Also, it was observed that coarser nanoparticles broke down high strain zones (HSZs) during tensile deformation. The addition of SiB 6 to Mg–Zn alloy also resulted in similar significant increase in tensile ductility (to about 23%). Tensile deformation induced alignment of more rounded and spherical nanoparticles was observed. Stacking faults forming more easily in the alloy matrix was also observed. However, the formation of nanograins (nanoscale recrystallization) during room temperature tensile deformation was observed in this system. This implied that nanograin rotation during deformation was also responsible for the observed enhanced tensile ductility. When ZrB 2 was added to Mg–RE alloy, the tensile strength was significantly enhanced (yield strength >400 MPa) after thermal ageing. Here, the ZrB 2 nanoparticles induced the formation of thermal ageing resistant long period stacking/ordered (LPSO) nanograins and nanolayers in the Mg

  12. Beyond Texas City: the state of process safety in the unionized U.S. oil refining industry.

    Science.gov (United States)

    McQuiston, Thomas H; Lippin, Tobi Mae; Bradley-Bull, Kristin; Anderson, Joseph; Beach, Josie; Beevers, Gary; Frederick, Randy J; Frederick, James; Greene, Tammy; Hoffman, Thomas; Lefton, James; Nibarger, Kim; Renner, Paul; Ricks, Brian; Seymour, Thomas; Taylor, Ren; Wright, Mike

    2009-01-01

    The March 2005 British Petroleum (BP) Texas City Refinery disaster provided a stimulus to examine the state of process safety in the U.S. refining industry. Participatory action researchers conducted a nation-wide mail-back survey of United Steelworkers local unions and collected data from 51 unionized refineries. The study examined the prevalence of highly hazardous conditions key to the Texas City disaster, refinery actions to address those conditions, emergency preparedness and response, process safety systems, and worker training. Findings indicate that the key highly hazardous conditions were pervasive and often resulted in incidents or near-misses. Respondents reported worker training was insufficient and less than a third characterized their refineries as very prepared to respond safely to a hazardous materials emergency. The authors conclude that the potential for future disasters plagues the refining industry. In response, they call for effective proactive OSHA regulation and outline ten urgent and critical actions to improve refinery process safety.

  13. A perspective on the states` role in the Department of Energy`s Office of Environmental Management budget process

    Energy Technology Data Exchange (ETDEWEB)

    Carter, J.P.; Hinman, P. [Carter, Brock & Hinman, Boise, ID (United States)

    1995-12-31

    Responding in 1994 to proposed budget reductions and predicted funding shortfalls, the Office of Environmental Management at the Department of Energy began working closely with its regulators and stakeholders to prioritize activities. In a series of national and site specific meetings held with representatives of states, the Environmental Protection Agency, Indian tribes and the public, the Department of Energy brought regulators and other stakeholders into its budget development process in a {open_quotes}bottoms up{close_quotes} approach to the prioritization of activities at each of its sites. This paper presents an overview of this process which began last year and will highlight its unique cooperative nature. This paper will assess ways of institutionalizing this process. It also identifies issues to be addressed in resolving matters related to future budgets. Areas of concern to the Department of Energy`s host states and their regulators will be identified as they relate to waste management, cleanup and facility transition activities.

  14. THE EFFECTS OF BANKRUPTCY ON THE PREDICTABILITY OF PRICE FORMATION PROCESSES ON WARSAW’S STOCK MARKET

    Directory of Open Access Journals (Sweden)

    Paweł Fiedor

    2016-07-01

    Full Text Available In this study we investigate how bankruptcy affects the market behaviour of prices of stocks on Warsaw’s Stock Exchange. As the behaviour of prices can be seen in a myriad of ways, we investigate a particular aspect of this behaviour, namely the predictability of these price formation processes. We approximate their predictability as the structural complexity of logarithmic returns. This method of analysing predictability of price formation processes using information theory follows closely the mathematical definition of predictability, and is equal to the degree to which redundancy is present in the time series describing stock returns. We use Shannon’s entropy rate (approximating Kolmogorov-Sinai entropy to measure this redundancy, and estimate it using the Lempel-Ziv algorithm, computing it with a running window approach over the entire price history of 50 companies listed on the Warsaw market which have gone bankrupt in the last few years. This enables us not only to compare the differences between predictability of price formation processes before and after their filing for bankruptcy, but also to compare the changes in predictability over time, as well as divided into different categories of companies and bankruptcies. There exists a large body of research analysing the efficiency of the whole market and the predictability of price changes enlarge, but only a few detailed studies analysing the influence of external stimulion the efficiency of price formation processes. This study fills this gap in the knowledge of financial markets, and their response to extreme external events.

  15. Global Positioning System data collection, processing, and analysis conducted by the U.S. Geological Survey Earthquake Hazards Program

    Science.gov (United States)

    Murray, Jessica R.; Svarc, Jerry L.

    2017-01-01

    The U.S. Geological Survey Earthquake Science Center collects and processes Global Positioning System (GPS) data throughout the western United States to measure crustal deformation related to earthquakes and tectonic processes as part of a long‐term program of research and monitoring. Here, we outline data collection procedures and present the GPS dataset built through repeated temporary deployments since 1992. This dataset consists of observations at ∼1950 locations. In addition, this article details our data processing and analysis procedures, which consist of the following. We process the raw data collected through temporary deployments, in addition to data from continuously operating western U.S. GPS stations operated by multiple agencies, using the GIPSY software package to obtain position time series. Subsequently, we align the positions to a common reference frame, determine the optimal parameters for a temporally correlated noise model, and apply this noise model when carrying out time‐series analysis to derive deformation measures, including constant interseismic velocities, coseismic offsets, and transient postseismic motion.

  16. Deposition and characteristics of PbS thin films by an in-situ solution chemical reaction process

    Energy Technology Data Exchange (ETDEWEB)

    Ji, Junna; Ji, Huiming; Wang, Jian; Zheng, Xuerong; Lai, Junyun; Liu, Weiyan; Li, Tongfei [School of Materials Science and Engineering, Key Laboratory for Advanced Ceramics and Machining Technology of Ministry of Education, Tianjin University, Tianjin 300072 (China); Ma, Yuanliang; Li, Haiqin; Zhao, Suqin [College of Physics and Electronic Information Engineering, Qinghai University for Nationalities, Xining 810007 (China); Jin, Zhengguo, E-mail: zhgjin@tju.edu.cn [School of Materials Science and Engineering, Key Laboratory for Advanced Ceramics and Machining Technology of Ministry of Education, Tianjin University, Tianjin 300072 (China)

    2015-09-01

    Preferential oriented and uniform PbS thin films were deposited by a room temperature in-situ solution chemical reaction process, in which the lead nitrate as precursor in a form of thin solid films from lead precursor solution was used to react with ammonium sulfide ethanol solution. Influence of 1-butanol addition in the lead precursor solution, Pb:S molar ratios in the separate cationic and anionic solutions, deposition cycle numbers and annealing treatment in Ar atmosphere on structure, morphology, chemical composition and optical absorption properties of the deposited PbS films were investigated based on X-ray diffraction, field emission scanning electron microscopy, energy dispersive spectrometer, atomic force microscopy, selected area electron diffraction, UV–vis, near infrared ray and fourier transform infrared spectroscopy measurements. The results showed that the deposited PbS thin films had a cubic structure and highly preferred orientation along with the plane (100). The deposition rate of single-layer was stable, about 30 nm in thickness per deposition cycle. - Highlights: • Time-efficiency synthetic method for the preparation of lead sulfide (PbS) films • Effect of 1-butanol addition into cationic precursor solution is discussed. • Growth rate of the PbS films is stable at about 30 nm per cycle.

  17. Plasma Separation Process: Betacell (BCELL) code: User's manual. [Bipolar barrier junction

    Energy Technology Data Exchange (ETDEWEB)

    Taherzadeh, M.

    1987-11-13

    The emergence of clearly defined applications for (small or large) amounts of long-life and reliable power sources has given the design and production of betavoltaic systems a new life. Moreover, because of the availability of the plasma separation program, (PSP) at TRW, it is now possible to separate the most desirable radioisotopes for betacell power generating devices. A computer code, named BCELL, has been developed to model the betavoltaic concept by utilizing the available up-to-date source/cell parameters. In this program, attempts have been made to determine the betacell energy device maximum efficiency, degradation due to the emitting source radiation and source/cell lifetime power reduction processes. Additionally, comparison is made between the Schottky and PN junction devices for betacell battery design purposes. Certain computer code runs have been made to determine the JV distribution function and the upper limit of the betacell generated power for specified energy sources. A Ni beta emitting radioisotope was used for the energy source and certain semiconductors were used for the converter subsystem of the betacell system. Some results for a Promethium source are also given here for comparison. 16 refs.

  18. Basic Data Report -- Defense Waste Processing Facility Sludge Plant, Savannah River Plant 200-S Area

    Energy Technology Data Exchange (ETDEWEB)

    Amerine, D.B.

    1982-09-01

    This Basic Data Report for the Defense Waste Processing Facility (DWPF)--Sludge Plant was prepared to supplement the Technical Data Summary. Jointly, the two reports were intended to form the basis for the design and construction of the DWPF. To the extent that conflicting information may appear, the Basic Data Report takes precedence over the Technical Data Summary. It describes project objectives and design requirements. Pertinent data on the geology, hydrology, and climate of the site are included. Functions and requirements of the major structures are described to provide guidance in the design of the facilities. Revision 9 of the Basic Data Report was prepared to eliminate inconsistencies between the Technical Data Summary, Basic Data Report and Scopes of Work which were used to prepare the September, 1982 updated CAB. Concurrently, pertinent data (material balance, curie balance, etc.) have also been placed in the Basic Data Report. It is intended that these balances be used as a basis for the continuing design of the DWPF even though minor revisions may be made in these balances in future revisions to the Technical Data Summary.

  19. MethodS of radioactive waste processing and disposal in the United Kingdom

    International Nuclear Information System (INIS)

    Tolstykh, V.D.

    1983-01-01

    The results of investigations into radioactive waste processing and disposal in the United Kingdom are discussed. Methods for solidification of metal and graphite radioactive wastes and radioactive slime of the Magnox reactors are described. Specifications of different installations used for radioactive waste disposal are given. Climatic and geological conditions in the United Kingdom are such that any deep storages of wastes will be lower than the underground water level. That is why dissolution and transport by underground waters will inevitably result in radionuclide mobility. In this connection an extended program of investigations into the main three aspects of disposal problem namely radionucleide release in storages, underground water transport and radionuclide migration is realized. The program is divided in two parts. The first part deals with retrival of hydrological and geochemical data on geological formations, development of specialized methods of investigations which are necessary for identification of places for waste final disposal. The second part represents theoretical and laboratory investigations into provesses of radionuclide transport in the system of ''sttorage-geological formation''. It is concluded that vitrification on the base of borosilicate glass is the most advanced method of radioactive waste solidification

  20. On the role of the simplest S-nitrosothiol, HSNO, in atmospheric and biological processes

    Energy Technology Data Exchange (ETDEWEB)

    Hochlaf, Majdi, E-mail: hochlaf@univ-mlv.fr; Linguerri, Roberto [Université Paris-Est, Laboratoire Modélisation et Simulation Multi Echelle, MSME UMR 8208 CNRS, 5 bd Descartes, 77454 Marne-la-Vallée (France); Francisco, Joseph S. [Department of Chemistry and Department of Earth and Atmospheric Sciences, Purdue University, West Lafayette, Indiana 47906 (United States)

    2013-12-21

    Using state-of-the-art theoretical methods, we investigate the lowest electronic states of singlet and triplet spin multiplicities of HSNO. These computations are done using configuration interaction ab initio methods and the aug-cc-pV5Z basis set. One-dimensional cuts of the six-dimensional potential energy surfaces of these electronic states along the HS, SN stretches and HSN, SNO bending and torsion coordinates are calculated. Several avoided crossings and conical intersections are found. We computed also radiative lifetimes and spin-orbit couplings of these electronic states. Our work shows that the dynamics on these excited states is very complex, and suggest that multi-step mechanisms will populate the ground state via radiationless processes or lead to predissociation or intramolecular isomerization. For instance, these potentials are used to propose mechanisms for the IR, Vis, and UV light-induced cis-trans interconversions of HSNO and reactivity towards HS + NO and H + SNO products. Our findings are in good agreement with previous experimental studies on the photochemistry of HSNO. The atmospheric implication of HSNO is also discussed.

  1. Vistula River bed erosion processes and their influence on Warsaw’s flood safety

    Directory of Open Access Journals (Sweden)

    A. Magnuszewski

    2015-03-01

    Full Text Available Large cities have historically been well protected against floods as a function of their importance to society. In Warsaw, Poland, located on a narrow passage of the Vistula River valley, urban flood disasters were not unusual. Beginning at the end of the 19th century, the construction of river embankment and training works caused the narrowing of the flood passage path in the downtown reach of the river. The process of bed erosion lowered the elevation of the river bed by 205 cm over the 20th century, and the consequences of bed lowering are reflected by the rating curve change. Conditions of the flood passage have been analysed by the CCHE2D hydrodynamic model both in retro-modelling and scenario simulation modelling. The high water mark of the 1844 flood and iterative calculations in retro-modelling made possible estimation of the discharge, Q = 8250 m3 s−1. This highest observed historical flood in a natural river has been compared to recent conditions of the Vistula River in Warsaw by scenario modelling. The result shows dramatic changes in water surface elevation, velocities, and shear stress. The vertical velocity in the proximity of Port Praski gauge at km 513 can reach 3.5 m s−1, a very high value for a lowland river. The average flow conveyance is improving due to channel erosion but also declining in the case of extreme floods due to high resistance from vegetation on the flood plains.

  2. Field effect transistors and phototransistors based upon p-type solution-processed PbS nanowires

    Science.gov (United States)

    Giraud, Paul; Hou, Bo; Pak, Sangyeon; Inn Sohn, Jung; Morris, Stephen; Cha, SeungNam; Kim, Jong Min

    2018-02-01

    We demonstrate the fabrication of solution processed highly crystalline p-type PbS nanowires via the oriented attachment of nanoparticles. The analysis of single nanowire field effect transistor (FET) devices revealed a hole conduction behaviour with average mobilities greater than 30 cm2 V-1 s-1, which is an order of magnitude higher than that reported to date for p-type PbS colloidal nanowires. We have investigated the response of the FETs to near-infrared light excitation and show herein that the nanowires exhibited gate-dependent photo-conductivities, enabling us to tune the device performances. The responsivity was found to be greater than 104 A W-1 together with a detectivity of 1013 Jones, which benefits from a photogating effect occurring at negative gate voltages. These encouraging detection parameters are accompanied by relatively short switching times of 15 ms at positive gate voltages, resulting from a combination of the standard photoconduction and the high crystallinity of the nanowires. Collectively, these results indicate that solution-processed PbS nanowires are promising nanomaterials for infrared photodetectors as well as p-type nanowire FETs.

  3. Consumer’s Buying Decision-Making Process in E-Commerce

    Directory of Open Access Journals (Sweden)

    Budi Puspitasari Nia

    2018-01-01

    Full Text Available The e-commerce growth and development in Indonesia is very rapid as well as the internet grows, but it is not well-balanced with the number of online buying transaction which is still relatively low. Even the today’s biggest B2C e-commerce people in Indonesia, Lazada, has continually decreased online purchasing. This research is aimed to describe factors affecting online buying decision- making in the e-commerce Lazada. The type of this research is confirmatory research. The variable used is following conceptual model i.e. Electronic Word of Mouth (EWOM, social identity, risk perception, trust, and purchase intention. The data were obtained through the questionnaire with Likert scale 1-5. There are 104 people researching sample who meets the criteria as Lazada consumer that, at least do a transaction in recent six months. Data analyzing were done using Structural Equation Modelling (SEM method by Analysis of Moment Structures (AMOS software. The results showed that the purchase intention has positively related to the purchase decision. Variable EWOM toward trust has positive relation, variable social identity and risk perception have no any significant relation to trust. Variable risk perception toward purchase intention has no significant relation, while the variable trust has significant positive relation to purchase intention.

  4. 20(S-Protopanaxadiol Phospholipid Complex: Process Optimization, Characterization, In Vitro Dissolution and Molecular Docking Studies

    Directory of Open Access Journals (Sweden)

    Yiqiong Pu

    2016-10-01

    Full Text Available 20(S-Protopanaxadiol (PPD, a bioactive compound extracted from ginseng, possesses cardioprotective, neuroprotective, anti-inflammatory, antiestrogenic, anticancer and anxiolytic effects. However, the clinical application of PPD is limited by its weak aqueous solubility. In this study, we optimized an efficient method of preparing its phospholipid complex (PPD-PLC using a central composite design and response surface analysis. The prepared PPD-PLC was characterized by differential scanning calorimetric, powder X-ray diffraction, Fourier-transformed infrared spectroscopy and nuclear magnetic resonance analyses associated with molecular docking calculation. The equilibrium solubility of PPD-PLC in water and n-octanol increased 6.53- and 1.53-times, respectively. Afterwards, using PPD-PLC as the intermediate, the PPD-PLC-loaded dry suspension (PPD-PLC-SU was prepared with our previous method. In vitro evaluations were conducted on PPD-PLC and PPD-PLC-SU, including dissolution behaviors and stability properties under different conditions. Results of in vitro dissolution behavior revealed the improved dissolution extents and rates of PPD-PLC and PPD-PLC-SU (p < 0.05. Results of the formulation stability investigation also exposed the better stability of PPD-PLC-SU compared with free PPD. Therefore, phospholipid complex technology is a useful formulation strategy for BCS II drugs, as it could effectively improve their hydrophilicity and lipophilicity.

  5. Scientific method by argumentation design: learning process for maintaining student’s retention

    Science.gov (United States)

    Siswanto; Yusiran; Asriyadin; Gumilar, S.; Subali, B.

    2018-03-01

    The purpose of this research describes the effect of scientific methods designed by argumentation in maintaining retention of pre-service physics teachers (students) in mechanical concept. This learning consists of five stages including the first two stages namely observing and questioning. While the next three stages of reasoning, trying, and communicating are made of argumentation design. To know the effectiveness of treatment, students are given pre-test and post-test in one time. On the other hand, students were given advanced post-test to know the durability of retention as many as four times in four months. The results show that there was mean difference between pre-test and post-test based on the Wilcoxon test (z = -3.4, p=0.001). While the effectiveness of treatment is in the high category based on normalized gain values ( = 0.86). Meanwhile, mean difference of all post-test is significantly different based on Analysis of Varian (F = 365.63, p = 0.00). However, in the fourth month, students retention rates began to stabilize based on Tuckey’s HSD (p=0.074) for comparison of mean difference between fourth and fifth post-test. Overall, learning designed can maintain students retention within 4 months after the learning finish.

  6. Process for selecting a site for Canada's deep geological repository for used nuclear fuel

    International Nuclear Information System (INIS)

    Facella, J.; Ben Belfadhel, M.; Patton, P.

    2012-01-01

    'Full Text:' The Nuclear Waste Management Organization (NWMO) is responsible for implementing Adaptive Phased Management, the approach selected by the Government of Canada for long-term management of used nuclear fuel waste generated by Canadian nuclear reactors. The ultimate objective of Adaptive Phased Management is the centralized containment and isolation of Canada's used nuclear fuel in a Deep Geological Repository in a suitable crystalline or sedimentary rock formation at a depth of about 500m. The repository will consist of a series of access and service shafts and a series of tunnels leading to placement rooms where used fuel will be placed and sealed in competent rock using a multi-barrier system which includes long lived specially designed containers, sealing materials such as bentonite and the rock itself. The used fuel will be monitored throughout all phases of implementation and will also remain retrievable for an extended period of time. In May 2010, the NWMO published the site selection process that serves as the road map to decision-making on the location for the deep geological repository. NWMO initiated the process with a first stage that invites communities to learn more about the project and the site selection process. NWMO is actively building awareness of the project and, on request of communities, is delivering briefings, supporting community capacity building and undertaking screenings of site suitability. This panel presentation provides a brief description of: Adaptive Phased Management including the deep geological repository which is its ultimate goal, and the design of the site selection process, and importantly the approach to assessing the suitability of sites from both a social and technical perspective. The panel presentation will be conducted in three parts: site selection process and engagement, Aboriginal engagement and Technical evaluations, followed by a discussion. The presentation will outline how NWMO sought

  7. STUDY OF RAINFALL RATES AND EROSIVE PROCESSES AT THE URBAN AREA OF SÃO LUÍS – MA

    Directory of Open Access Journals (Sweden)

    Antonio José Teixeira Guerra

    2005-05-01

    Full Text Available The study of the rain rates is here highlighted, in order to understand the mechanisms that generate the starting point of the erosive processes. The precipitation varies spatially not only in local and regional levels, due to mechanisms that generate rains, but also in short distances, due to the control of local variations, such as winds and constructions. In this way, the precipitations should be measured in different points of the study area, depending on the interest of the study and scale of analysis.The erosive process caused by rainfall covers almost the whole terrestrial surface, especially in tropical areas where the total rainfall is higher than in other regions of the planet. Besides that, the rain only falls on specific seasons in several areas, which worsens the erosion. The process tends to accelerate as the deforestation for wood exploitation and/or agricultural production takes place, once the soils become unprotected without the vegetal cover, so that the rains affect the surface of the grounds directly (GUERRA, 1999.This work presents the results of the monitoring of erosive processes along more than three years of studies at the urban area of São Luís City, relating rainfall rates to gullies evolution, an important instrument for the control and recovery of large-scale erosive processes.

  8. H2S and volatile fatty acids elimination by biofiltration: clean-up process for biogas potential use.

    Science.gov (United States)

    Ramírez-Sáenz, D; Zarate-Segura, P B; Guerrero-Barajas, C; García-Peña, E I

    2009-04-30

    In the present work, the main objective was to evaluate a biofiltration system for removing hydrogen sulfide (H(2)S) and volatile fatty acids (VFAs) contained in a gaseous stream from an anaerobic digestor (AD). The elimination of these compounds allowed the potential use of biogas while maintaining the methane (CH(4)) content throughout the process. The biodegradation of H(2)S was determined in the lava rock biofilter under two different empty bed residence times (EBRT). Inlet loadings lower than 200 g/m(3)h at an EBRT of 81 s yielded a complete removal, attaining an elimination capacity (EC) of 142 g/m(3)h, whereas at an EBRT of 31 s, a critical EC of 200 g/m(3)h was reached and the EC obtained exhibited a maximum value of 232 g/m(3)h. For 1500 ppmv of H(2)S, 99% removal was maintained during 90 days and complete biodegradation of VFAs was observed. A recovery of 60% as sulfate was obtained due to the constant excess of O(2) concentration in the system. Acetic and propionic acids as a sole source of carbon were also evaluated in the bioreactor at different inlet loadings (0-120 g/m(3)h) obtaining a complete removal (99%) for both. Microcosms biodegradation experiments conducted with VFAs demonstrated that acetic acid provided the highest biodegradation rate.

  9. Constituents’ formal participation in the IASB’s due process: New insights into the impact of country and due process document characteristics

    Directory of Open Access Journals (Sweden)

    Michael Dobler

    2016-09-01

    Full Text Available This paper adopts a multi-issue/multi-period approach to provide new insights into key determinants of constituents’ formal participation in the due process of the International Accounting Standards Board (IASB. Based on an analysis of 8,825 comment letters submitted during the period 2006–2012, we find imbalances in the representation of constituents. Multiple regressions reveal that among various economic and cultural variables equity market capitalization and the society’s level of individualism are the key drivers of the country-level of constituents’ participation, and each variable has explanatory power over the other. The level of constituents’ participation is positively associated with the number of input opportunities offered by a due process document but unrelated to the complexity of a standard-setting project. The results are robust across various sub-samples and to additional sensitivity tests. Our findings indicate threats to the input legitimacy of the IASB and suggest avenues to stimulate constituents’ participation.

  10. Process for selecting a site for Canada's deep geological repository for used nuclear fuel

    International Nuclear Information System (INIS)

    Facella, J.; Belfadhel, M.B.

    2011-01-01

    The Nuclear Waste Management Organization (NWMO) is responsible for implementing Adaptive Phased Management, the approach selected by the Government of Canada for long-term management of used nuclear fuel waste generated by Canadian nuclear reactors. The ultimate objective of Adaptive Phased Management is the centralized containment and isolation of Canada's used nuclear fuel in a Deep Geological Repository in a suitable crystalline or sedimentary rock formation at a depth of about 500m. The repository will consist of a series of access and service shafts and a series of tunnels leading to placement rooms where used fuel will be placed and sealed in competent rock using a multi-barrier system which includes long lived specially designed containers, sealing materials such as bentonite and the rock itself. The used fuel will be monitored throughout all phases of implementation and will also remain retrievable for an extended period of time. In May 2010, the NWMO published the site selection process that serves as the road map to decision-making on the location for the deep geological repository. NWMO initiated the process with a first stage that invites communities to learn more about the project and the site selection process. NWMO is actively building awareness of the project and, on request of communities, is delivering briefings, supporting community capacity building and undertaking high-level screenings of site suitability. The paper provides a brief description of: Adaptive Phased Management including the deep geological repository which is its ultimate goal, and the design of the site selection process, and importantly the approach to assessing the suitability of sites from both a social and technical perspective. The paper will outline how NWMO sought to develop a socially-acceptable site selection process as a firm foundation for future decisions on siting. Through a two-year collaborative process, NWMO sought to understand the expectations of

  11. Identification of methicillin-resistant Staphylococcus aureus within the Nation’s Veterans Affairs Medical Centers using natural language processing

    Directory of Open Access Journals (Sweden)

    Jones Makoto

    2012-07-01

    Full Text Available Abstract Background Accurate information is needed to direct healthcare systems’ efforts to control methicillin-resistant Staphylococcus aureus (MRSA. Assembling complete and correct microbiology data is vital to understanding and addressing the multiple drug-resistant organisms in our hospitals. Methods Herein, we describe a system that securely gathers microbiology data from the Department of Veterans Affairs (VA network of databases. Using natural language processing methods, we applied an information extraction process to extract organisms and susceptibilities from the free-text data. We then validated the extraction against independently derived electronic data and expert annotation. Results We estimate that the collected microbiology data are 98.5% complete and that methicillin-resistant Staphylococcus aureus was extracted accurately 99.7% of the time. Conclusions Applying natural language processing methods to microbiology records appears to be a promising way to extract accurate and useful nosocomial pathogen surveillance data. Both scientific inquiry and the data’s reliability will be dependent on the surveillance system’s capability to compare from multiple sources and circumvent systematic error. The dataset constructed and methods used for this investigation could contribute to a comprehensive infectious disease surveillance system or other pressing needs.

  12. The role of Fe and Ni for s-process nucleosynthesis in the early Universe and for innovative nuclear technologies

    CERN Multimedia

    Manousos, A; Heil, M; Plag, R

    The early universe was enriched in heavy elements by massive stars via their s- and r-process contributions. Ultra metal-poor stars were found to show abundance patterns that scale exactly with the solar r component. While this holds exactly for elements heavier than barium, there is still confusion about significant discrepancies in the mass region below A ${\\leq}$ 120. It is known that massive stars contribute significantly to the abundances between Fe and Zr. This so-called weak s-process component was found to exhibit large uncertainties due to the poorly known cross sections, especially in the Fe- i region. In view of this problem it is proposed to perform accurate state-of-the art measurements on highly enriched samples of the stable Fe and Ni isotopes at the n_TOF facility. Transformation of these results into significantly improved stellar cross section rates will allow to disentangle the s and r contributions observed in the oldest stars for a reliable comparison with galactic chemical evolution mode...

  13. Biological and Psychosocial Processes in the Development of Children’s Appetitive Traits: Insights from Developmental Theory and Research

    Directory of Open Access Journals (Sweden)

    Catherine G. Russell

    2018-05-01

    Full Text Available There has been increasing concern expressed about children’s food intakes and dietary patterns. These are closely linked to children’s appetitive traits (such as disinhibited eating and food fussiness/neophobia. Research has examined both biological and psychosocial correlates or predictors of these traits. There has been less focus on possible processes or mechanisms associated with children’s development of these traits and research that links biological and psychosocial factors. There is an absence of research that links biological and psychosocial factors. In the present article, we outline a model intended to facilitate theory and research on the development of appetitive traits. It is based on scholarship from developmental theory and research and incorporates biological factors such as genetic predispositions and temperament as well as psychosocial factors in terms of parent cognitions, feeding styles and feeding practices. Particular attention is directed to aspects such as emotional eating and feeding, self-regulation of energy intake, and non-shared family environments. We highlight the opportunity for longitudinal research that examines bidirectional, transactional and cascade processes and uses a developmental framework. The model provides a basis for connecting the biological foundations of appetitive traits to system-level analysis in the family. Knowledge generated through the application of the model should lead to more effective prevention and intervention initiatives.

  14. Processes affectin the chemistry of waters passing through a high elevator Sierra Nevada watershed. [U. S. A

    Energy Technology Data Exchange (ETDEWEB)

    Nodvin, S.C.

    1987-01-01

    The Eastern Brook Lakes watershed is located in the Sierra Nevada Mountains of California and spans and elevational range from 3060 to 3780 m. Changes in stream and lake chemistries along spatial and temporal flowpaths demonstrate that both terrestrial and aquatic processes were important in regulating surface water chemistries within the 250 ha watershed. Streams generally showed increasing pH, alkalinity, and conductance values with decreasing elevation. Large changes in stream chemistries occurred over short distances at locations such as alpine meadows. During the spring, stream alkalinities and conductance values decreased while stream pH values increased with time. pH values reached their maximim in June when alkalinity and conductance values were at their minimum values. Internal lake processes strongly influenced the chemistry of Upper Eastern Brook Lake. During spring and summer, lake waters exhibited near-neutral pH, low conductance (10-12 ..mu..S/cm), low alkalinity (100-120 ..mu..Eq/L), and undetectable ammonium. Under the ice, major changes in lake chemistry occurred associated with oxygen depletion in the hypolimnion. pH values decreased with time towards a minimum of 6.3 at 6 m depth. Other parameters increased w time and depth under the ice, reaching maximum values as follows: conductance > 80 ..mu..S/cm/sup -1/ Gran's alkalinity > 370 ..mu..Eq/L/sup -1/, and ammonium > 50 /sup m/u/sup E/q/L/sup -1/. 5 figures, 10 references.

  15. Maximum Potential Hydrogen Gas Retention in the sRF Resin Ion Exchange Column for the LAWPS Process

    Energy Technology Data Exchange (ETDEWEB)

    Gauglitz, Phillip A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wells, Beric E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bottenus, Courtney LH [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Schonewill, Philip P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2018-01-22

    The Low-Activity Waste Pretreatment System (LAWPS) is being developed to provide treated supernatant liquid from the Hanford tank farms directly to the Low-Activity Waste (LAW) Vitrification Facility at the Hanford Tank Waste Treatment and Immobilization Plant. The design and development of the LAWPS is being conducted by Washington River Protection Solutions, LLC. A key process in LAWPS is the removal of radioactive Cs in ion exchange (IX) columns filled with spherical resorcinol-formaldehyde (sRF) resin. One accident scenario being evaluated is the loss of liquid flow through the sRF resin bed after it has been loaded with radioactive Cs and hydrogen gas is being generated by radiolysis. In normal operations, the generated hydrogen is expected to remain dissolved in the liquid and be continuously removed by liquid flow. For an accident scenario with a loss of flow, hydrogen gas can be retained within the IX column both in the sRF resin and below the bottom screen that supports the resin within the column. The purpose of this report is to summarize calculations that estimate the upper-bound volume of hydrogen gas that can be retained in the column and potentially be released to the headspace of the IX column or to process equipment connected to the IX column and, thus, pose a flammability hazard.

  16. Influences of Different Components on Agglomeration Behavior of MoS2 During Oxidation Roasting Process in Air

    Science.gov (United States)

    Wang, Lu; Zhang, Guo-Hua; Wang, Jing-Song; Chou, Kuo-Chih

    2016-08-01

    An agglomeration of the furnace charge always takes place during the oxidation roasting process of molybdenite concentrate (with the main component of MoS2) in multiple hearth furnaces, which greatly affects the production process and furnace service life. In the present work, a preliminary study about the influence of various components on the agglomeration phenomenon of pure MoS2 have been carried out. The results show that reaction temperature, impurity content, and air flow rate have significant effects on the agglomeration extent. Meanwhile, the impurity type added into the pure MoS2 plays a crucial role. It was found that CaO and MgO have a stronger sulfur-fixing effect and that the desulphurization of the roasted product was uncompleted. It was also concluded that the agglomeration is due to the formation of low-melting-point eutectics, including that between MoO3 and impurities and that between MoO3 and Mo4O11. It is suggested that decreasing the impurities contents, especially K, Cu, Pb, and Fe, is an effective method for reducing the extent of agglomeration.

  17. Preliminary design of S-CO{sub 2} Brayton cycle for APR-1400 with power generation and desalination process

    Energy Technology Data Exchange (ETDEWEB)

    Bae, Seong Jun; Lee, Won Woong; Jeong, Yong Hoon; Lee, Jeong Ik [KAIST, Daejeon (Korea, Republic of); Yoon, Ho Joon [KUSTAR, Abu Dhabi (United Arab Emirates)

    2015-10-15

    This study was conducted to explore the capabilities of the S-CO{sub 2} Brayton cycle for a cogeneration system for APR-1400 application. Three concepts of the S-CO{sub 2} simple recuperated co-generation cycle were designed. A supercritical CO{sub 2} (S-CO{sub 2}) Brayton cycle is recently receiving significant attention as a promising power conversion system in wide range of energy applications due to its high efficiency and compact footprint. The main reason why the S-CO{sub 2} Brayton cycle has these advantages is that the compressor operates near the critical point of CO{sub 2} (30.98 .deg. C, 7.38MPa) to reduce the compression work significantly compared to the other Brayton cycles. In this study, the concept of replacing the entire steam cycle of APR-1400 with the S-CO{sub 2} Brayton cycle is evaluated. The power generation purpose S-CO{sub 2} Brayton cycles are redesigned to generate power and provide heat to the desalination system at the same time. The performance of these newly suggested cycles are evaluated in this paper. The target was to deliver 147MW heat to the desalination process. The thermal efficiencies of the three concepts are not significantly different, but the 3{sup rd} concept is relatively simpler than other cycles because only an additional heat exchanger is required. Although the 2{sup nd} concept is relatively complicated in comparison to other concepts, the temperatures at the inlet and outlet of the DHX are higher than that of the others. As shown in the results, the S-CO{sub 2} Brayton cycles are not easy to outperform the steam cycle with very simple layout and general design points under APR-1400 operating condition. However, this study shows that the S-CO{sub 2} Brayton cycles can be designed as a co-generation cycle while producing the target desalination heat with a simple configuration. In addition, it was also found that the S-CO{sub 2} Brayton cycle can achieve higher cycle thermal efficiency than the steam power cycle under

  18. Impaired Emotional Mirroring in Parkinson’s Disease—A Study on Brain Activation during Processing of Facial Expressions

    Directory of Open Access Journals (Sweden)

    Anna Pohl

    2017-12-01

    Full Text Available BackgroundAffective dysfunctions are common in patients with Parkinson’s disease, but the underlying neurobiological deviations have rarely been examined. Parkinson’s disease is characterized by a loss of dopamine neurons in the substantia nigra resulting in impairment of motor and non-motor basal ganglia-cortical loops. Concerning emotional deficits, some studies provide evidence for altered brain processing in limbic- and lateral-orbitofrontal gating loops. In a second line of evidence, human premotor and inferior parietal homologs of mirror neuron areas were involved in processing and understanding of emotional facial expressions. We examined deviations in brain activation during processing of facial expressions in patients and related these to emotion recognition accuracy.Methods13 patients and 13 healthy controls underwent an emotion recognition task and a functional magnetic resonance imaging (fMRI measurement. In the Emotion Hexagon test, participants were presented with blends of two emotions and had to indicate which emotion best described the presented picture. Blended pictures with three levels of difficulty were included. During fMRI scanning, participants observed video clips depicting emotional, non-emotional, and neutral facial expressions or were asked to produce these facial expressions themselves.ResultsPatients performed slightly worse in the emotion recognition task, but only when judging the most ambiguous facial expressions. Both groups activated inferior frontal and anterior inferior parietal homologs of mirror neuron areas during observation and execution of the emotional facial expressions. During observation, responses in the pars opercularis of the right inferior frontal gyrus, in the bilateral inferior parietal lobule and in the bilateral supplementary motor cortex were decreased in patients. Furthermore, in patients, activation of the right anterior inferior parietal lobule was positively related to accuracy in

  19. Optimisation Platform for copper ore processing at the Division of Concentrator of KGHM Polska Miedz S.A.

    Directory of Open Access Journals (Sweden)

    Kuzba Bogdan

    2016-01-01

    Full Text Available The idea of Optimisation Platform is to create an innovative system. It is dedicated to technology and cost efficiency improvement of process realized at the Division of Concentrators of KGHM Polska Miedz SA. This highly sophisticated tool is based on visual, acoustic and vibrating detection systems. The range of its functionality was described in this work. Three main utility modules were described: froth flotation image processing (FloVis, grinding and classification monitoring (MillVis and belt conveyors control unit (ConVis. The effects of implementation of the system under KGHM conditions were described. It is concluded that the Optimisation Platform is one of the most promising solution for improvement of technology and economy performance at the Division of Concentrators of KGHM Polska Miedz S.A.

  20. CHARACTERIZING THE HEAVY ELEMENTS IN GLOBULAR CLUSTER M22 AND AN EMPIRICAL s-PROCESS ABUNDANCE DISTRIBUTION DERIVED FROM THE TWO STELLAR GROUPS

    International Nuclear Information System (INIS)

    Roederer, I. U.; Marino, A. F.; Sneden, C.

    2011-01-01

    We present an empirical s-process abundance distribution derived with explicit knowledge of the r-process component in the low-metallicity globular cluster M22. We have obtained high-resolution, high signal-to-noise spectra for six red giants in M22 using the Magellan Inamori Kyocera Echelle spectrograph on the Magellan-Clay Telescope at Las Campanas Observatory. In each star we derive abundances for 44 species of 40 elements, including 24 elements heavier than zinc (Z = 30) produced by neutron-capture reactions. Previous studies determined that three of these stars (the 'r+s group') have an enhancement of s-process material relative to the other three stars (the 'r-only group'). We confirm that the r+s group is moderately enriched in Pb relative to the r-only group. Both groups of stars were born with the same amount of r-process material, but s-process material was also present in the gas from which the r+s group formed. The s-process abundances are inconsistent with predictions for asymptotic giant branch (AGB) stars with M ≤ 3 M ☉ and suggest an origin in more massive AGB stars capable of activating the 22 Ne(α,n) 25 Mg reaction. We calculate the s-process 'residual' by subtracting the r-process pattern in the r-only group from the abundances in the r+s group. In contrast to previous r- and s-process decompositions, this approach makes no assumptions about the r- and s-process distributions in the solar system and provides a unique opportunity to explore s-process yields in a metal-poor environment.

  1. Characterizing the Heavy Elements in Globular Cluster M22 and an Empirical s-process Abundance Distribution Derived from the Two Stellar Groups

    Science.gov (United States)

    Roederer, I. U.; Marino, A. F.; Sneden, C.

    2011-11-01

    We present an empirical s-process abundance distribution derived with explicit knowledge of the r-process component in the low-metallicity globular cluster M22. We have obtained high-resolution, high signal-to-noise spectra for six red giants in M22 using the Magellan Inamori Kyocera Echelle spectrograph on the Magellan-Clay Telescope at Las Campanas Observatory. In each star we derive abundances for 44 species of 40 elements, including 24 elements heavier than zinc (Z = 30) produced by neutron-capture reactions. Previous studies determined that three of these stars (the "r+s group") have an enhancement of s-process material relative to the other three stars (the "r-only group"). We confirm that the r+s group is moderately enriched in Pb relative to the r-only group. Both groups of stars were born with the same amount of r-process material, but s-process material was also present in the gas from which the r+s group formed. The s-process abundances are inconsistent with predictions for asymptotic giant branch (AGB) stars with M <= 3 M ⊙ and suggest an origin in more massive AGB stars capable of activating the 22Ne(α,n)25Mg reaction. We calculate the s-process "residual" by subtracting the r-process pattern in the r-only group from the abundances in the r+s group. In contrast to previous r- and s-process decompositions, this approach makes no assumptions about the r- and s-process distributions in the solar system and provides a unique opportunity to explore s-process yields in a metal-poor environment. This paper includes data gathered with the 6.5 m Magellan Telescopes located at Las Campanas Observatory, Chile.

  2. Canada's Deep Geological Repository for Used Nuclear Fuel - Geo-scientific Site Evaluation Process - 13117

    Energy Technology Data Exchange (ETDEWEB)

    Blyth, Alec; Ben Belfadhel, Mahrez; Hirschorn, Sarah; Hamilton, Duncan; McKelvie, Jennifer [Nuclear Waste Management Organization, 22 St. Clair Avenue East, Toronto, Ontario M4T 2S3 (Canada)

    2013-07-01

    The Nuclear Waste Management Organization (NWMO) is responsible for implementing Adaptive Phased Management (APM), the approach selected by the Government of Canada for long-term management of used nuclear fuel generated by Canadian nuclear reactors. The ultimate objective of APM is the centralized containment and isolation of Canada's used nuclear fuel in a Deep Geological Repository in a suitable rock formation at a depth of approximately 500 meters (m) (1,640 feet [ft]). In May 2010, the NWMO published a nine-step site selection process that serves as the road map to decision-making on the location for the deep geological repository. The safety and appropriateness of any potential site will be assessed against a number of factors, both technical and social in nature. The selected site will be one that can be demonstrated to be able to safely contain and isolate used nuclear fuel, protecting humans and the environment over the very long term. The geo-scientific suitability of potential candidate sites will be assessed in a stepwise manner following a progressive and thorough site evaluation process that addresses a series of geo-scientific factors revolving around five safety functions. The geo-scientific site evaluation process includes: Initial Screenings; Preliminary Assessments; and Detailed Site Evaluations. As of November 2012, 22 communities have entered the site selection process (three in northern Saskatchewan and 18 in northwestern and southwestern Ontario). (authors)

  3. The role of trophic factors and inflammatory processes in physical activity-induced neuroprotection in Parkinson’s disease

    Directory of Open Access Journals (Sweden)

    Ewelina Pałasz

    2017-01-01

    Full Text Available Glial cells and neurotrophins play an important role in maintaining homeostasis of the CNS. Disturbances of their function can lead to a number of nervous system diseases, including Parkinson’s disease (PD. Current clinical studies provide evidence that moderate physical activity adapted to the health status of PD patients can support pharmacological treatment, slow down the onset of motor impairments, and extend the patients period of independence. Physical activity, by stimulating the production and release of endogenous trophic factors, prevents the neurodegeneration of dopaminergic neurons via inhibition of inflammatory processes and the reduction of oxidative stress. The aim of this study is to present the current state of knowledge for the anti-inflammatory and neuroprotective properties of physical activity as a supportive therapy in Parkinson’s disease.

  4. The reconstruction process of the Public Prosecutor’s Office in the political transition (1974-1985

    Directory of Open Access Journals (Sweden)

    Debora Alves Maciel

    2014-12-01

    Full Text Available The article analyzes reconstruction dynamics of the Public Prosecutor’s Office, focusing on the mobilization of prosecutors and prosecuting attorney in the period from 1974 to 1985. We argue that the characteristics of Brazilian political transition were critical to the changing process of the institution, which gained constitutional status in 1988. Liberalization of the military regime changed the links between lawyers, opposition parties and pro-democracy movements. The connection of the institutional movement with dissident political elites and the dense activism network around new social conflicts allowed the Public Prosecutor’s Office to try new strategies of collective action, gain political visibility and thus become a viable alternative to political system to respond to social pressures for judiciary democratization.

  5. A strategy of combining SILAR with solvothermal process for In2S3 sensitized quantum dot-sensitized solar cells

    Science.gov (United States)

    Yang, Peizhi; Tang, Qunwei; Ji, Chenming; Wang, Haobo

    2015-12-01

    Pursuit of an efficient strategy for quantum dot-sensitized photoanode has been a persistent objective for enhancing photovoltaic performances of quantum dot-sensitized solar cell (QDSC). We present here the fabrication of the indium sulfide (In2S3) quantum dot-sensitized titanium dioxide (TiO2) photoanode by combining successive ionic layer adsorption and reaction (SILAR) with solvothermal processes. The resultant QDSC consists of an In2S3 sensitized TiO2 photoanode, a liquid polysulfide electrolyte, and a Co0.85Se counter electrode. The optimized QDSC with photoanode prepared with the help of a SILAR method at 20 deposition cycles and solvothermal method yields a maximum power conversion efficiency of 1.39%.

  6. Combined plasma gas-phase synthesis and colloidal processing of InP/ZnS core/shell nanocrystals

    Science.gov (United States)

    Gresback, Ryan; Hue, Ryan; Gladfelter, Wayne L.; Kortshagen, Uwe R.

    2011-12-01

    Indium phosphide nanocrystals (InP NCs) with diameters ranging from 2 to 5 nm were synthesized with a scalable, flow-through, nonthermal plasma process at a rate ranging from 10 to 40 mg/h. The NC size is controlled through the plasma operating parameters, with the residence time of the gas in the plasma region strongly influencing the NC size. The NC size distribution is narrow with the standard deviation being less than 20% of the mean NC size. Zinc sulfide (ZnS) shells were grown around the plasma-synthesized InP NCs in a liquid phase reaction. Photoluminescence with quantum yields as high as 15% were observed for the InP/ZnS core-shell NCs.

  7. The Development of a General Purpose ARM-based Processing Unit for the ATLAS TileCal sROD

    OpenAIRE

    Cox, Mitchell Arij; Reed, Robert; Mellado Garcia, Bruce Rafael

    2014-01-01

    The Large Hadron Collider at CERN generates enormous amounts of raw data which present a serious computing challenge. After Phase-II upgrades in 2022, the data output from the ATLAS Tile Calorimeter will increase by 200 times to 41 Tb/s! ARM processors are common in mobile devices due to their low cost, low energy consumption and high performance. It is proposed that a cost-effective, high data throughput Processing Unit (PU) can be developed by using several consumer ARM processors in a clus...

  8. Combined plasma gas-phase synthesis and colloidal processing of InP/ZnS core/shell nanocrystals

    OpenAIRE

    Hue Ryan; Gladfelter Wayne; Gresback Ryan; Kortshagen Uwe

    2011-01-01

    Abstract Indium phosphide nanocrystals (InP NCs) with diameters ranging from 2 to 5 nm were synthesized with a scalable, flow-through, nonthermal plasma process at a rate ranging from 10 to 40 mg/h. The NC size is controlled through the plasma operating parameters, with the residence time of the gas in the plasma region strongly influencing the NC size. The NC size distribution is narrow with the standard deviation being less than 20% of the mean NC size. Zinc sulfide (ZnS) shells were grown ...

  9. Dark-matter production through loop-induced processes at the LHC: the s-channel mediator case.

    Science.gov (United States)

    Mattelaer, Olivier; Vryonidou, Eleni

    We show how studies relevant for mono-X searches at the LHC in simplified models featuring a dark-matter candidate and an s -channel mediator can be performed within the MadGraph5_aMC@NLO framework. We focus on gluon-initiated loop-induced processes, mostly relevant to the case where the mediator couples preferentially to third generation quarks and in particular to the top quark. Our implementation allows us to study signatures at hadron colliders involving missing transverse energy plus jets or plus neutral bosons ([Formula: see text]), possibly including the effects of extra radiation by multi-parton merging and matching to the parton shower.

  10. Fabrication of CuInS2-sensitized solar cells via an improved SILAR process and its interface electron recombination.

    Science.gov (United States)

    Xu, Xueqing; Wan, Qingcui; Luan, Chunyan; Mei, Fengjiao; Zhao, Qian; An, Ping; Liang, Zhurong; Xu, Gang; Zapien, Juan Antonio

    2013-11-13

    Tetragonal CuInS2 (CIS) has been successfully deposited onto mesoporous TiO2 films by in-sequence growth of InxS and CuyS via a successive ionic layer absorption and reaction (SILAR) process and postdeposition annealing in sulfur ambiance. X-ray diffraction and Raman measurements showed that the obtained tetragonal CIS consisted of a chalcopyrite phase and Cu-Au ordering, which related with the antisite defect states. For a fixed Cu-S deposition cycle, an interface layer of β-In2S3 formed at the TiO2/CIS interface with suitable excess deposition of In-S. In the meantime, the content of the Cu-Au ordering phase decreased to a reasonable level. These facts resulted in the retardance of electron recombination in the cells, which is proposed to be dominated by electron transfer from the conduction band of TiO2 to the unoccupied defect states in CIS via exponentially distributed surface states. As a result, a relatively high efficiency of ~0.92% (V(oc) = 0.35 V, J(sc) = 8.49 mA cm(-2), and FF = 0.31) has been obtained. Last, but not least, with an overloading of the sensitizers, a decrease in the interface area between the sensitized TiO2 and electrolytes resulted in deceleration of hole extraction from CIS to the electrolytes, leading to a decrease in the fill factor of the solar cells. It is indicated that the unoccupied states in CIS with energy levels below EF0 of the TiO2 films play an important role in the interface electron recombination at low potentials and has a great influence on the fill factor of the solar cells.

  11. Solution-Processed Environmentally Friendly Ag2S Colloidal Quantum Dot Solar Cells with Broad Spectral Absorption

    Directory of Open Access Journals (Sweden)

    Viktor A. Öberg

    2017-10-01

    Full Text Available A facile heat-up synthesis route is used to synthesize environmentally friendly Ag2S colloidal quantum dots (CQDs that are applied as light absorbing material in solid state p-i-n junction solar cell devices. The as-synthesized Ag2S CQDs have an average size of around 3.5 nm and exhibit broad light absorption covering ultraviolet, visible, and near infrared wavelength regions. The solar cell devices are constructed with a device architecture of FTO/TiO2/Ag2S CQDs/hole transport material (HTM /Au using a solution-processed approach. Different HTMs, N2,N2,N2′,N2′,N7,N7,N7′,N7′-octakis(4-methoxyphenyl-9,9′-spirobi(9H-fluorene-2,2′,7,7′ tetramine (spiro-OMeTAD, poly(3-hexylthiophene-2,5-diyl (P3HT, and poly((2,3-bis(3-octyloxyphenyl-5,8-quinoxalinediyl-2,5-thiophenediyl TQ1 are studied for maximizing the device photovoltaic performance. The solar cell device with P3HT as a hole transport material gives the highest performance and the solar cell exhibit broad spectral absorption. These results indicate that Ag2S CQD have high potential for utilization as environmentally friendly light absorbing materials for solar cell application and that the hole transport material is critical to maximize the solar cell photovoltaic performance.

  12. ON THE MEASUREMENT OF THE 13C(α, n)16O S-FACTOR AT NEGATIVE ENERGIES AND ITS INFLUENCE ON THE s-PROCESS

    International Nuclear Information System (INIS)

    La Cognata, M.; Spitaleri, C.; Trippella, O.; Kiss, G. G.; Guardo, G. L.; Puglia, S. M. R.; Romano, S.; Spartà, R.; Rogachev, G. V.; Avila, M.; Koshchiy, E.; Kuchera, A.; Santiago, D.; Mukhamedzhanov, A. M.; Lamia, L.

    2013-01-01

    The 13 C(α, n) 16 O reaction is the neutron source for the main component of the s-process, responsible for the production of most of the nuclei in the mass range 90 ∼ 8 K, corresponding to an energy interval where the 13 C(α, n) 16 O reaction is effective in the range of 140-230 keV. In this regime, the astrophysical S(E)-factor is dominated by the –3 keV sub-threshold resonance due to the 6.356 MeV level in 17 O, giving rise to a steep increase in the S-factor. Its contribution is still controversial as extrapolations, e.g., through the R-matrix and indirect techniques such as the asymptotic normalization coefficient (ANC), yield inconsistent results. The discrepancy amounts to a factor of three or more precisely at astrophysical energies. To provide a more accurate S-factor at these energies, we have applied the Trojan horse method (THM) to the 13 C( 6 Li, n 16 O)d quasi-free reaction. The ANC for the 6.356 MeV level has been deduced through the THM as well as the n-partial width, allowing us to attain unprecedented accuracy for the 13 C(α, n) 16 O astrophysical factor. A larger ANC for the 6.356 MeV level is measured with respect to the ones in the literature, (C-tilde α 13 C 17O(1/2+)2 = 7.7 ± 0.3 stat -1.5 +1. |6 norm fm –1 , yet in agreement with the preliminary result given in our preceding letter, indicating an increase of the 13 C(α, n) 16 O reaction rate below about 8 × 10 7 K if compared with the recommended values. At ∼10 8 K, our reaction rate agrees with most of the results in the literature and the accuracy is greatly enhanced thanks to this innovative approach

  13. Settlement of Turkic Tribes in Azerbaijan and the Reflection of This Process in the Country’s Toponymy

    Directory of Open Access Journals (Sweden)

    Ramil E. Agaev

    2017-10-01

    Full Text Available Studying the problems related to the process of the Azerbaijanian people formation requires a comprehensive analysis of mutual relations of the Turkic tribes – the Huns, the Sabirs and the Khazars – with the local population of Azerbaijan in the early Middle Ages. The article is devoted to the process of penetration of the Huns, the Sabirs and the Khazars to Azerbaijan, their role in the formation of the Azerbaijanian people and the reflection of this process in the country’s toponymy. In the early Middle Ages the process of penetration of Turkic tribes in Azerbaijan from the north, through the Derbent passage, intensified. Primary sources indicate that over the centuries the Huns (3rd – 4th centuries, the Sabirs (5th – 6th centuries and the Khazars (7th – 8th centuries made continuous attacks on Azerbaijan and neighboring countries from the north. Upon the arrival of the Turkic tribes in Azerbaijan from the north in the 3rd – 4th centuries, the Turkic language in the country was extensively spread. Just since then the ethnotoponyms “Hun”, “Suvar” and “Khazar” became consolidated in the toponymy of Azerbaijan. Revealing the meaning of toponyms, ethnonyms, town names, hydronyms, introduced in language use in the 3rd – 8th centuries and associated with the aforementioned tribes, has exceptional value for recreating the ethnic view of Azerbaijan of the studied epoch. They let us come to the conclusion that the Huns, the Sabirs and the Khazars were important ethnic elements in the process of ethnogenesis of the Azerbaijanian people.

  14. s-Processing from MHD-induced mixing and isotopic abundances in presolar SiC grains

    Science.gov (United States)

    Palmerini, S.; Trippella, O.; Busso, M.; Vescovi, D.; Petrelli, M.; Zucchini, A.; Frondini, F.

    2018-01-01

    In the past years the observational evidence that s-process elements from Sr to Pb are produced by stars ascending the so-called Asymptotic Giant Branch (or "AGB") could not be explained by self-consistent models, forcing researchers to extensive parameterizations. The crucial point is to understand how protons can be injected from the envelope into the He-rich layers, yielding the formation of 13C and then the activation of the 13C (α,n)16O reaction. Only recently, attempts to solve this problem started to consider quantitatively physically-based mixing mechanisms. Among them, MHD processes in the plasma were suggested to yield mass transport through magnetic buoyancy. In this framework, we compare results of nucleosynthesis models for Low Mass AGB Stars (M≲ 3M⊙), developed from the MHD scenario, with the record of isotopic abundance ratios of s-elements in presolar SiC grains, which were shown to offer precise constraints on the 13C reservoir. We find that n-captures driven by magnetically-induced mixing can indeed account for the SiC data quite well and that this is due to the fact that our 13C distribution fulfils the above constraints rather accurately. We suggest that similar tests should be now performed using different physical models for mixing. Such comparisons would indeed improve decisively our understanding of the formation of the neutron source.

  15. Relationships Among Student-body Composition, School Process, and Mathematics Achievement in Argentina’s High Schools

    Directory of Open Access Journals (Sweden)

    Rubén Alberto Cervini Iturre

    2003-05-01

    Full Text Available This is a study of the relationships between the student-body composition of the school, some characteristics of the scholastic process—culture and school climate—according to learners’ perceptions, and the mathematics achievement of students in the last year of high school in Argentina. The data used came from the 1998 National Census of High School Completion, carried out by the nation’s Ministry of Culture and Education. The file contains data for 135,000 students of 2,708 schools in 25 states. Multilevel linear modeling with three levels (student, school and state was applied. A strong relationship was detected between mathematics achievement and the variables student-body composition and school process. When both variables acted together, the effect of other variables experienced a pronounced descent. Although reduced, the variables of the process influenced the student’s achievement. There was identified for future works a reference model which would evaluate other institutional learning factors.

  16. Modeling the removal of Sunfix Red S3B from aqueous solution by electrocoagulation process using artificial neural network

    Directory of Open Access Journals (Sweden)

    Manh Ha Bui

    2016-01-01

    Full Text Available This study presents an application of artificial neural networks (ANNs to predict the dye removal efficiency (color and chemical oxygen demand value of Electrocoagulation process from Sunfix Red S3B aqueous solution. The Bayesian regulation algorithm was applied to train the networks with experimental data including five factors: pH, current density, sulphate concentration, initial dye concentration (IDC, and electrolysis time. The predicting performance of the ANN models was validated through the low root mean square error value (9.844 %, mean absolute percentage error (13.776 % and the high determination coefficient value (0.836. Garson, Connection weight method and neural interpretation diagram were also used to study the influence of input variables on dye removal efficiency. For decolorization, the most effective inputs are determined as current density, electrolysis time and initial pH, while COD removal is found to be strongly affected by initial dye concentration and sulphate concentration. Through these steps, we demonstrated ANN’s robustness in modeling and analysis of electrocoagulation process.

  17. Evaluating models of population process in a threatened population of Steller’s eiders: A retrospective approach

    Science.gov (United States)

    Dunham, Kylee; Grand, James B.

    2016-10-11

    The Alaskan breeding population of Steller’s eiders (Polysticta stelleri) was listed as threatened under the Endangered Species Act in 1997 in response to perceived declines in abundance throughout their breeding and nesting range. Aerial surveys suggest the breeding population is small and highly variable in number, with zero birds counted in 5 of the last 25 years. Research was conducted to evaluate competing population process models of Alaskan-breeding Steller’s eiders through comparison of model projections to aerial survey data. To evaluate model efficacy and estimate demographic parameters, a Bayesian state-space modeling framework was used and each model was fit to counts from the annual aerial surveys, using sequential importance sampling and resampling. The results strongly support that the Alaskan breeding population experiences population level nonbreeding events and is open to exchange with the larger Russian-Pacific breeding population. Current recovery criteria for the Alaskan breeding population rely heavily on the ability to estimate population viability. The results of this investigation provide an informative model of the population process that can be used to examine future population states and assess the population in terms of the current recovery and reclassification criteria.

  18. Biblio-MetReS for user-friendly mining of genes and biological processes in scientific documents.

    Science.gov (United States)

    Usie, Anabel; Karathia, Hiren; Teixidó, Ivan; Alves, Rui; Solsona, Francesc

    2014-01-01

    One way to initiate the reconstruction of molecular circuits is by using automated text-mining techniques. Developing more efficient methods for such reconstruction is a topic of active research, and those methods are typically included by bioinformaticians in pipelines used to mine and curate large literature datasets. Nevertheless, experimental biologists have a limited number of available user-friendly tools that use text-mining for network reconstruction and require no programming skills to use. One of these tools is Biblio-MetReS. Originally, this tool permitted an on-the-fly analysis of documents contained in a number of web-based literature databases to identify co-occurrence of proteins/genes. This approach ensured results that were always up-to-date with the latest live version of the databases. However, this 'up-to-dateness' came at the cost of large execution times. Here we report an evolution of the application Biblio-MetReS that permits constructing co-occurrence networks for genes, GO processes, Pathways, or any combination of the three types of entities and graphically represent those entities. We show that the performance of Biblio-MetReS in identifying gene co-occurrence is as least as good as that of other comparable applications (STRING and iHOP). In addition, we also show that the identification of GO processes is on par to that reported in the latest BioCreAtIvE challenge. Finally, we also report the implementation of a new strategy that combines on-the-fly analysis of new documents with preprocessed information from documents that were encountered in previous analyses. This combination simultaneously decreases program run time and maintains 'up-to-dateness' of the results. http://metres.udl.cat/index.php/downloads, metres.cmb@gmail.com.

  19. Biblio-MetReS for user-friendly mining of genes and biological processes in scientific documents

    Directory of Open Access Journals (Sweden)

    Anabel Usie

    2014-02-01

    Full Text Available One way to initiate the reconstruction of molecular circuits is by using automated text-mining techniques. Developing more efficient methods for such reconstruction is a topic of active research, and those methods are typically included by bioinformaticians in pipelines used to mine and curate large literature datasets. Nevertheless, experimental biologists have a limited number of available user-friendly tools that use text-mining for network reconstruction and require no programming skills to use. One of these tools is Biblio-MetReS. Originally, this tool permitted an on-the-fly analysis of documents contained in a number of web-based literature databases to identify co-occurrence of proteins/genes. This approach ensured results that were always up-to-date with the latest live version of the databases. However, this ‘up-to-dateness’ came at the cost of large execution times. Here we report an evolution of the application Biblio-MetReS that permits constructing co-occurrence networks for genes, GO processes, Pathways, or any combination of the three types of entities and graphically represent those entities. We show that the performance of Biblio-MetReS in identifying gene co-occurrence is as least as good as that of other comparable applications (STRING and iHOP. In addition, we also show that the identification of GO processes is on par to that reported in the latest BioCreAtIvE challenge. Finally, we also report the implementation of a new strategy that combines on-the-fly analysis of new documents with preprocessed information from documents that were encountered in previous analyses. This combination simultaneously decreases program run time and maintains ‘up-to-dateness’ of the results. Availability: http://metres.udl.cat/index.php/downloads, Contact: metres.cmb@gmail.com.

  20. Auditing the process of ethics approval for Master’s degrees at a South African university

    Directory of Open Access Journals (Sweden)

    Damian Clarke

    2014-04-01

    Full Text Available Introduction. This study audited the process of ethics approval for Master’s research at the Nelson R Mandela School of Medicine, Durban, KwaZulu-Natal, South Africa.Methods. After obtaining the appropriate ethical approval, all the correspondence surrounding each Master’s proposal for the year 2010 was reviewed. Results. A total of 53 proposals for Master’s degrees were available for review. All the proposals were for low-risk studies, and all were subjected to expedited review. It took an average of 15 weeks (range 3 - 32 for the institutional ethics review board (the Biomedical Research Ethics Committee (BREC to respond to each of the 53 proposals. Twenty-three studies (43.4% received provisional approval on the first response, 2 proposals (3.8% were rejected, and 28 proposals (52.8% were sent back with major queries. For the 28 proposals that required major revisions, 11 responses had been submitted by the time the data were collected. The average length of time to receive a response from the applicants to BREC queries was 4 weeks.Conclusion. This study suggests that there is a potential cumulative delay of over 4 months before data collection for low-risk clinical audits can be commenced. Any system designed to improve this situation must ensure that high standards of vigilance are maintained, but must be flexible enough to allow for a faster review and approval process.

  1. Process studies for a new method of removing H/sub 2/S from industrial gas streams

    Energy Technology Data Exchange (ETDEWEB)

    Neumann, D.W.; Lynn, S.

    1986-07-01

    A process for the removal of hydrogen sulfide from coal-derived gas streams has been developed. The basis for the process is the absorption of H/sub 2/S into a polar organic solvent where it is reacted with dissolved sulfur dioxide to form elemental sulfur. After sulfur is crystallized from solution, the solvent is stripped to remove dissolved gases and water formed by the reaction. The SO/sub 2/ is generated by burning a portion of the sulfur in a furnace where the heat of combustion is used to generate high pressure steam. The SO/sub 2/ is absorbed into part of the lean solvent to form the solution necessary for the first step. The kinetics of the reaction between H/sub 2/S and SO/sub 2/ dissolved in mixtures of N,N-Dimethylaniline (DMA)/ Diethylene Glycol Monomethyl Ether and DMA/Triethylene Glycol Dimethyl Ether was studied by following the temperature rise in an adiabatic calorimeter. This irreversible reaction was found to be first-order in both H/sub 2/S and SO/sub 2/, with an approximates heat of reaction of 28 kcal/mole of SO/sub 2/. The sole products of the reaction appear to be elemental sulfur and water. The presence of DMA increases the value of the second-order rate constant by an order of magnitude over that obtained in the glycol ethers alone. Addition of other tertiary aromatic amines enhances the observed kinetics; heterocyclic amines (e.g., pyridine derivatives) have been found to be 10 to 100 times more effective as catalysts when compared to DMA.

  2. The fusion-fission process in the reaction {sup 34}S+{sup 186}W near the interaction barrier

    Energy Technology Data Exchange (ETDEWEB)

    Harca, I. M. [Flerov Laboratory of Nuclear Reactions, Joint Institute for Nuclear Research, (FLNR JINR) Dubna, Russia and Faculty of Physics, University of Bucharest - P.O. Box MG 11, RO 77125, Bucharest-Magurele (Romania); Dmitriev, S.; Itkis, J.; Kozulin, E. M.; Knyazheva, G.; Loktev, T.; Novikov, K. [Flerov Laboratory of Nuclear Reactions, Joint Institute for Nuclear Research, (FLNR JINR) Dubna (Russian Federation); Azaiez, F.; Gottardo, A.; Matea, I.; Verney, D. [IPN, CNRS/IN2P3, Univ. Paris-Sud, 91405 Orsay (France); Chubarian, G. [Cyclotron Institute, Texas A and M University, College Station, TX 77843-3366 (United States); Hanappe, F. [Universite Libre de Bruxelles (ULB), Bruxelles (Belgium); Piot, J.; Schmitt, C. [GANIL, CEA/DSM-CNRS/IN2P3, Bd Henri Becquerel, BP 55027, F-14076 Caen Cedex 5 (France); Trzaska, W. H. [Accelerator Laboratory of University of Jyväskylä (JYFL), Jyväskylä (Finland); Vardaci, E. [Dipartamento di Scienze Fisiche and INFN (INFN-Na), Napoli (Italy)

    2015-02-24

    The reaction {sup 34}S+{sup 186}W at E{sub lab}=160 MeV was investigated with the aim of diving into the features of the fusion-fission process. Gamma rays in coincidence with binary reaction fragments were measured using the high efficiency gamma-ray spectrometer ORGAM at the TANDEM Accelerator facility of I.P.N., Orsay, and the time-of-flight spectrometer for fission fragments (FF) registration CORSET of the Flerov Laboratory of Nuclear Reactions (FLNR), Dubna. The coupling of the ORGAM and CORSET setups offers the unique opportunity of extracting details for characterizing the fusion-fission process and gives information regarding production of neutron-rich heavy nuclei. The FF–γ coincidence method is of better use then the γ – γ coincidence method when dealing with low statistic measurements and also offers the opportunity to precisely correct the Dopler shift for in-flight emitted gamma rays. Evidence of symmetric and asymmetric fission modes were observed in the mass and TKE distributions, occurring due to shell effects in the fragments. Coincident measurements allow for discrimination between the gamma rays by accepting a specific range within the mass distribution of the reaction products. Details regarding the experimental setup, methods of processing the acquisitioned data and preliminary results are presented.

  3. Structural and process factors affecting the implementation of antimicrobial resistance prevention and control strategies in U.S. hospitals.

    Science.gov (United States)

    Chou, Ann F; Yano, Elizabeth M; McCoy, Kimberly D; Willis, Deanna R; Doebbeling, Bradley N

    2008-01-01

    To address increases in the incidence of infection with antimicrobial-resistant pathogens, the National Foundation for Infectious Diseases and Centers for Disease Control and Prevention proposed two sets of strategies to (a) optimize antibiotic use and (b) prevent the spread of antimicrobial resistance and control transmission. However, little is known about the implementation of these strategies. Our objective is to explore organizational structural and process factors that facilitate the implementation of National Foundation for Infectious Diseases/Centers for Disease Control and Prevention strategies in U.S. hospitals. We surveyed 448 infection control professionals from a national sample of hospitals. Clinically anchored in the Donabedian model that defines quality in terms of structural and process factors, with the structural domain further informed by a contingency approach, we modeled the degree to which National Foundation for Infectious Diseases and Centers for Disease Control and Prevention strategies were implemented as a function of formalization and standardization of protocols, centralization of decision-making hierarchy, information technology capabilities, culture, communication mechanisms, and interdepartmental coordination, controlling for hospital characteristics. Formalization, standardization, centralization, institutional culture, provider-management communication, and information technology use were associated with optimal antibiotic use and enhanced implementation of strategies that prevent and control antimicrobial resistance spread (all p prevention and control (p support these organizational processes. These findings suggest concrete strategies for evaluating current capabilities to implement effective practices and foster and sustain a culture of patient safety.

  4. Chloroplast RNA-Binding Protein RBD1 Promotes Chilling Tolerance through 23S rRNA Processing in Arabidopsis.

    Directory of Open Access Journals (Sweden)

    Shuai Wang

    2016-05-01

    Full Text Available Plants have varying abilities to tolerate chilling (low but not freezing temperatures, and it is largely unknown how plants such as Arabidopsis thaliana achieve chilling tolerance. Here, we describe a genome-wide screen for genes important for chilling tolerance by their putative knockout mutants in Arabidopsis thaliana. Out of 11,000 T-DNA insertion mutant lines representing half of the genome, 54 lines associated with disruption of 49 genes had a drastic chilling sensitive phenotype. Sixteen of these genes encode proteins with chloroplast localization, suggesting a critical role of chloroplast function in chilling tolerance. Study of one of these proteins RBD1 with an RNA binding domain further reveals the importance of chloroplast translation in chilling tolerance. RBD1 is expressed in the green tissues and is localized in the chloroplast nucleoid. It binds directly to 23S rRNA and the binding is stronger under chilling than at normal growth temperatures. The rbd1 mutants are defective in generating mature 23S rRNAs and deficient in chloroplast protein synthesis especially under chilling conditions. Together, our study identifies RBD1 as a regulator of 23S rRNA processing and reveals the importance of chloroplast function especially protein translation in chilling tolerance.

  5. In-Fiber Subpicosecond Pulse Shaping for Nonlinear Optical Telecommunication Data Processing at 640 Gbit/s

    Directory of Open Access Journals (Sweden)

    J. Azaña

    2012-01-01

    Full Text Available We review recent work on all-fiber (long-period fiber grating devices for optical pulse shaping, particularly flat-top pulse generation, down to the subpicosecond range and their application for nonlinear switching (demultiplexing of optical time-division multiplexed (OTDM data signals in fiber-optic telecommunication links operating up to 640 Gbit/s. Experiments are presented demonstrating error-free 640-to-10 Gbit/s demultiplexing of the 64 tributary channels using the generated flat-top pulses for temporal gating in a Kerr-effect-based nonlinear optical loop mirror. The use of flat-top pulses has critical benefits in the demultiplexing process, including a significantly increased timing-jitter tolerance (up to ~500 fs, i.e., 30% of the bit period and the associated improvement in the bit-error-rate performance (e.g., with a sensitivity increase of up to ~13 dB as compared with the use of Gaussian-like gating pulses. Long-period fiber grating pulse shapers with reduced polarization dependence are fabricated and successfully used for polarization-independent 640-to-10 Gbit/s demultiplexing experiments.

  6. Prediction of the combustion process and emission formation of a bi-fuel s.i. engine

    International Nuclear Information System (INIS)

    D'Errico, Gianluca

    2008-01-01

    A thermodynamic model is developed and validated for the prediction of the combustion process and pollutant formation in s.i. engines, fuelled by gasoline and compressed natural gas. Attention is focused on the main physical and chemical phenomena to allow a reliable evaluation of the burning rate and of the specie concentrations, including intermediates such as CO, O, H, and OH. A new correlation for laminar flame speed of methane-air mixtures is derived by interpolating more than 1000 different conditions at high pressure and temperature, computed by a detailed chemical approach. Successively an extended dissertation about the fundamental mechanisms which govern the pollutant formation in the turbulent premixed combustion which characterizes the s.i. engines is given. The conclusion of such analysis is the definition of a new reduced chemical scheme, based on the application of partial-equilibrium and steady-state assumptions for the radicals and the solution of a transport equation for each specie which is kinetically controlled. Finally the proposed schemes and formulations were embedded into the developed quasi-D model and into a CFD code, to simulate a s.i. engine fuelled by gasoline and CNG, allowing a deeper understanding of the reliability of the simplifications made in the quasi-dimensional model and a comprehensive investigation of several physical and chemical properties, whose experimental measurement is not usually available. Computed results were compared with the available experimental data of in-cylinder pressure histories and engine emissions for two different engine configurations

  7. Low-temperature processed ZnO and CdS photodetectors deposited by pulsed laser deposition

    International Nuclear Information System (INIS)

    Hernandez-Como, N; Moreno, S; Mejia, I; Quevedo-Lopez, M A

    2014-01-01

    UV-VIS photodetectors using an interdigital configuration, with zinc oxide (ZnO) and cadmium sulfide (CdS) semiconductors deposited by pulsed laser deposition, were fabricated with a maximum processing temperature of 100 °C. Without any further post-growth annealing, the photodetectors are compatible with flexible and transparent substrates. Aluminum (Al) and indium tin oxide (ITO) were investigated as contacts. Focusing on underwater communications, the impact of metal contact (ITO versus Al) was investigated to determine the maximum responsivity using a laser with a 405 nm wavelength. As expected, the responsivity increases for reduced metal finger separation. This is a consequence of reduced carrier transit time for shorter finger separation. For ITO, the highest responsivities for both films (ZnO and CdS) were ∼3 A W −1 at 5 V. On the other hand, for Al contacts, the maximum responsivities at 5 V were ∼0.1 A W −1 and 0.7 A W −1 for CdS and ZnO, respectively. (paper)

  8. Probing astrophysically important states in the 26Mg nucleus to study neutron sources for the s process

    Science.gov (United States)

    Talwar, R.; Adachi, T.; Berg, G. P. A.; Bin, L.; Bisterzo, S.; Couder, M.; deBoer, R. J.; Fang, X.; Fujita, H.; Fujita, Y.; Görres, J.; Hatanaka, K.; Itoh, T.; Kadoya, T.; Long, A.; Miki, K.; Patel, D.; Pignatari, M.; Shimbara, Y.; Tamii, A.; Wiescher, M.; Yamamoto, T.; Yosoi, M.

    2016-05-01

    Background: The 22Ne(α ,n )25Mg reaction is the dominant neutron source for the slow neutron capture process (s process) in massive stars, and contributes, together with 13C (α ,n )16O, to the production of neutrons for the s process in asymptotic giant branch (AGB) stars. However, the reaction is endothermic and competes directly with 22Ne(α ,γ )26Mg radiative capture. The uncertainties for both reactions are large owing to the uncertainty in the level structure of 26Mg near the α and neutron separation energies. These uncertainties affect the s -process nucleosynthesis calculations in theoretical stellar models. Purpose: Indirect studies in the past have been successful in determining the energies and the γ -ray and neutron widths of the 26Mg states in the energy region of interest. But, the high Coulomb barrier hinders a direct measurement of the resonance strengths, which are determined by the α widths for these states. The goal of the present experiments is to identify the critical resonance states and to precisely measure the α widths by α -transfer techniques. Methods: The α -inelastic scattering and α -transfer measurements were performed on a solid 26Mg target and a 22Ne gas target, respectively, using the Grand Raiden Spectrometer at the Research Center for Nuclear Physics in Osaka, Japan. The (α ,α') measurements were performed at 0 .45∘ , 4 .1∘ , 8 .6∘ , and 11 .1∘ and the (6Li,d ) measurements at 0∘ and 10∘. The scattered α particles and deuterons were detected by the focal plane detection system consisting of multiwire drift chambers and plastic scintillators. The focal plane energy calibration allowed the study of 26Mg levels from Ex = 7.69-12.06 MeV in the (α ,α') measurement and Ex = 7.36-11.32 MeV in the (6Li,d ) measurement. Results: Six levels (Ex = 10717, 10822, 10951, 11085, 11167, and 11317 keV) were observed above the α threshold in the region of interest (10.61-11.32 MeV). The α widths were calculated for these

  9. Through tobacco industry eyes: civil society and the FCTC process from Philip Morris and British American Tobacco’s perspectives

    Science.gov (United States)

    Gonzalez, Mariaelena; Green, Lawrence W; Glantz, Stanton A

    2011-01-01

    Objective To analyse the models Philip Morris (PM) and British American Tobacco (BAT) used internally to understand tobacco control non-governmental organizations (NGOs) and their relationship to the global tobacco control policy-making process that resulted in the Framework Convention for Tobacco Control (FCTC). Methods Analysis of internal tobacco industry documents in the Legacy Tobacco Document Library. Results PM contracted with Mongoven, Biscoe, and Duchin, Inc. (MBD, a consulting firm specialising in NGO surveillance) as advisors. MBD argued that because NGOs are increasingly linked to epistemic communities, NGOs could insert themselves into the global policy-making process and influence the discourse surrounding the treaty-making process. MBD advised PM to insert itself into the policy-making process, mimicking NGO behaviour. BAT’s Consumer and Regulatory Affairs (CORA) department argued that global regulation emerged from the perception (by NGOs and governments) that the industry could not regulate itself, leading to BAT advocating social alignment and self-regulation to minimise the impact of the FCTC. Most efforts to block or redirect the FCTC failed. Conclusions PM and BAT articulated a global policy-making environment in which NGOs are key, non-state stakeholders, and as a result, internationalised some of their previous national-level strategies. After both companies failed to prevent the FCTC, their strategies began to align. Multinational corporations have continued to successfully employ some of the strategies outlined in this paper at the local and national level while being formally excluded from ongoing FCTC negotiations at the global level. PMID:21636611

  10. The effect of nonhuman’s external regulation on detecting the natural development process of young children’s self-regulation during learning tasks

    NARCIS (Netherlands)

    Agina, Adel Masaud; Agina, Adel M.; Kommers, Petrus A.M.; Steehouder, M.F.

    2011-01-01

    The present study explored the effect of nonhuman’s external regulation on children’s natural development of self-regulation and the effect of each natural developed class on children’s spontaneous thinking aloud and satisfaction. The Aginian’s methodology (Agina et al., 2011a) that relied on

  11. Frozen Fractals all Around: Solar flares, Ampere’s Law, and the Search for Units in Scale-Free Processes.

    Science.gov (United States)

    McAteer, R. T. James

    2015-08-01

    My soul is spiraling in frozen fractals all around, And one thought crystallizes like an icy blast, I'm never going back, the past is in the past.Elsa, from Disney’s Frozen, characterizes two fundamental aspects of scale-free processes in Nature: fractals are everywhere in space; fractals can be used to probe changes in time. Self-Organized Criticality provides a powerful set of tools to study scale-free processes. It connects spatial fractals (more generically, multifractals) to temporal evolution. The drawback is that this usually results in scale-free, unit-less, indices, which can be difficult to connect to everyday physics. Here, I show a novel method that connects one of the most powerful SOC tools - the wavelet transform modulus maxima approach to calculating multifractality - to one of the most powerful equations in all of physics - Ampere’s law. In doing so I show how the multifractal spectra can be expressed in terms of current density, and how current density can then be used for the prediction of future energy release from such a system.Our physical understanding of the solar magnetic field structure, and hence our ability to predict solar activity, is limited by the type of data currently available. I show that the multifractal spectrum provides a powerful physical connection between the details of photospheric magnetic gradients of current data and the coronal magnetic structure. By decomposing Ampere’s law and comparing it to the wavelet transform modulus maximum method, I show how the scale-free Holder exponent provides a direct measure of current density across all relevant sizes. The prevalence of this current density across various scales is connected to its stability in time, and hence to the ability of the magnetic structure to store and then release energy. Hence (spatial) multifractals inform us of (future) solar activity.Finally I discuss how such an approach can be used in any study of scale-free processes, and highlight the necessary

  12. Democratic Dialogue as a Process to Inform Public Policy: Reconceptualizing a Supervisory Officer’s Qualification Program

    Directory of Open Access Journals (Sweden)

    Deirdre M. Smith

    2015-06-01

    Full Text Available An exploration of the collaborative reconceptualization of a provincial Supervisory Officer’s Qualification Program (SOQP through the use of dialogic approaches is the focus of this inquiry. The stories, perspectives, and lived experiences of supervisory officers, principals, teachers, parents, students, and members of the public in Ontario were included as essential voices and information sources within policy development conversations. These narratives of experience revealed the forms of knowledge, skills, dispositions, and ethical commitments necessary for effective supervisory officers today and in the future. They also illustrated the transformative nature of narrative dialogue to enlighten, deepen understanding, and alter perspec- tives. The policy development processes used in this publicly shared educational initiative serve as a model of democratic dialogue. The inclusive and dialogic methods employed to collectively reconceptualize a supervisory officer formation program illustrate an innovative framework for developing policies governing the public good.

  13. Intractable Chronic Low-Back Pain Caused by Ligamentopathia Treated Using a Spinous Process Plate (S-plate

    Directory of Open Access Journals (Sweden)

    Yu-ichiro Ohnishi

    2010-03-01

    Full Text Available We report a case of intractable chronic low-back pain in a gymnast that was caused by ligamentopathia in the interspinous region of the lumbar vertebrae. Sprained interspinous ligaments are a common mechanical cause of acute low-back pain in athletes. Although conservative therapy is generally effective in such cases, in this case it was not. The patient experienced severe low-back pain during lumbar flexion with tension between the L5/S interspinous ligaments. We performed interspinous fixation by using a spinous process plate system, which has been developed for short in situ fusions, and following which the low-back pain resolved. Conservative therapy for low-back pain caused by ligamentopathia is first-line choice, but interspinous fixation with instrumentation might be recommended in intractable cases with conservative therapy.

  14. Alpha-cluster transfer process in colliding S-D shell nuclei using the energy density formalism

    International Nuclear Information System (INIS)

    Puri, R.K.; Gupta, R.K.

    1992-01-01

    The energy density formalism is used for the first time to study the resonance-like behaviour of the α-cluster transfer process, observed for collisions between the s-d shell nuclei. Within the dynamical fragmentation theory, this formalism is shown to give better the observed alpha resonance-like mass spectrum of colliding α-particle nuclei and its suppression on adding neutrons to either of the α-particle reaction partners, compared with the earlier calculations of one of us and collaborators using the proximity pocket formula. For composite systems with N>>Z, these calculations predict an explicit preference for transfer of those clusters that are observed in recent cluster radioactivity. (Author)

  15. Contributions in the Preparation and Processing of Composite Material Type Silumin 3 - Reinforced Matrix with S235JR Steel Mesh

    Directory of Open Access Journals (Sweden)

    Remus Belu-Nica

    2015-07-01

    Full Text Available In the paper are presented concrete data on developing technological batches of metal composite material (MCM type Silumin 3-reinforced matrix with steel mesh S235JR, with the indicating of the parameter and of the distinct stages of work. The samples from prepared batches were cut along and across by water jet abrasive process and were subjected to a destructive testing program and microstructural examination, obtaining results in concordance with the desired quality. The abrasive material used for cut was GMA granite with the average mesh of 80, the particle size ranging between 150-300 µm, density 2300 kg/m3 and melting point 1240°C.

  16. Research on choice of xanthates blend dedicated to processing technology at KGHM Polska Miedz S.A. concentrators

    Directory of Open Access Journals (Sweden)

    Pawlos Witold

    2016-01-01

    Full Text Available A proper choice of reagents quality and quantity has a great influence on the flotation process effectiveness. Attempts to develop a method to create sodium xanthates blends used as a collector for copper sulphides flotation was undertaken at the Division of Concentrators of KGHM Polska Miedz S.A. Laboratory tests involving different blends of sodium xanthates were performed followed by the data analysis of the results. The obtained results proved that it was profitable to prepare a blend consisted of the so called “weak” and “strong” xanthates with a minimum difference in the alkyl chain length of two carbon atoms. The results of research will be helpful for development of specific xanthates blends dedicated to technology applied at KGHM under industrial conditions.

  17. Dark-matter production through loop-induced processes at the LHC: the s-channel mediator case

    Energy Technology Data Exchange (ETDEWEB)

    Mattelaer, Olivier [Durham University, Institute for Particle Physics Phenomenology (IPPP), Durham (United Kingdom); Vryonidou, Eleni [Universite catholique de Louvain, Centre for Cosmology, Particle Physics and Phenomenology (CP3), Louvain-la-Neuve (Belgium)

    2015-09-15

    We show how studies relevant for mono-X searches at the LHC in simplified models featuring a dark-matter candidate and an s-channel mediator can be performed within the MadGraph5{sub a}MC rate at NLO framework. We focus on gluon-initiated loop-induced processes, mostly relevant to the case where the mediator couples preferentially to third generation quarks and in particular to the top quark. Our implementation allows us to study signatures at hadron colliders involving missing transverse energy plus jets or plus neutral bosons (γ,Z,H), possibly including the effects of extra radiation by multi-parton merging and matching to the parton shower. (orig.)

  18. Dark-matter production through loop-induced processes at the LHC: the s-channel mediator case

    International Nuclear Information System (INIS)

    Mattelaer, Olivier; Vryonidou, Eleni

    2015-01-01

    We show how studies relevant for mono-X searches at the LHC in simplified models featuring a dark-matter candidate and an s-channel mediator can be performed within the MadGraph5 a MC rate at NLO framework. We focus on gluon-initiated loop-induced processes, mostly relevant to the case where the mediator couples preferentially to third generation quarks and in particular to the top quark. Our implementation allows us to study signatures at hadron colliders involving missing transverse energy plus jets or plus neutral bosons (γ,Z,H), possibly including the effects of extra radiation by multi-parton merging and matching to the parton shower. (orig.)

  19. Multilayer Transparent Top Electrode for Solution Processed Perovskite/Cu(In,Ga)(Se,S)2 Four Terminal Tandem Solar Cells.

    Science.gov (United States)

    Yang, Yang Michael; Chen, Qi; Hsieh, Yao-Tsung; Song, Tze-Bin; Marco, Nicholas De; Zhou, Huanping; Yang, Yang

    2015-07-28

    Halide perovskites (PVSK) have attracted much attention in recent years due to their high potential as a next generation solar cell material. To further improve perovskites progress toward a state-of-the-art technology, it is desirable to create a tandem structure in which perovskite may be stacked with a current prevailing solar cell such as silicon (Si) or Cu(In,Ga)(Se,S)2 (CIGS). The transparent top electrode is one of the key components as well as challenges to realize such tandem structure. Herein, we develop a multilayer transparent top electrode for perovskite photovoltaic devices delivering an 11.5% efficiency in top illumination mode. The transparent electrode is based on a dielectric/metal/dielectric structure, featuring an ultrathin gold seeded silver layer. A four terminal tandem solar cell employing solution processed CIGS and perovskite cells is also demonstrated with over 15% efficiency.

  20. s-PROCESSING IN AGB STARS REVISITED. II. ENHANCED {sup 13}C PRODUCTION THROUGH MHD-INDUCED MIXING

    Energy Technology Data Exchange (ETDEWEB)

    Trippella, O.; Busso, M.; Palmerini, S.; Maiorca, E. [Department of Physics, University of Perugia, and INFN, Section of Perugia, via A. Pascoli, I-06123 Perugia (Italy); Nucci, M. C., E-mail: oscar.trippella@fisica.unipg.it [Department of Mathematics and Informatics, University of Perugia, via Vanvitelli, I-06123 Perugia and INFN, Section of Perugia, via A. Pascoli, I-06123 Perugia (Italy)

    2016-02-20

    Slow neutron captures are responsible for the production of about 50% of elements heavier than iron, mainly occurring during the asymptotic giant branch phase of low-mass stars (1 ≲ M/M{sub ⊙} ≲ 3), where the main neutron source is the {sup 13}C(α, n){sup 16}O reaction. This last reaction is activated from locally produced {sup 13}C, formed by partial mixing of hydrogen into the He-rich layers. We present here the first attempt to describe a physical mechanism for the formation of the {sup 13}C reservoir, studying the mass circulation induced by magnetic buoyancy without adding new free parameters to those already involved in stellar modeling. Our approach represents the application to the stellar layers relevant for s-processing of recent exact analytical 2D and 3D models for magneto-hydrodynamic processes at the base of convective envelopes in evolved stars in order to promote downflows of envelope material for mass conservation during the occurrence of a dredge-up phenomenon. We find that the proton penetration is characterized by small concentrations, but is extended over a large fractional mass of the He-layers, thus producing {sup 13}C reservoirs of several 10{sup −3} M{sub ⊙}. The ensuing {sup 13}C-enriched zone has an almost flat profile, while only a limited production of {sup 14}N occurs. In order to verify the effects of our new findings we show how the abundances of the main s-component nuclei can be accounted for in solar proportions and how our large {sup 13}C-reservoir allows us to solve a few so far unexplained features in the abundance distribution of post-AGB objects.

  1. Family in the process of the construction of a disabled person’s image. The role of gender in disability

    Directory of Open Access Journals (Sweden)

    IWONA RUDEK

    2017-10-01

    Full Text Available The issues related to the role of the family in the process of creating relationships with ill and disabled people are discussed in the article. All individuals posses concepts of the disabled that form their attitudes towards such people. The image of a disabled person is responsible for one’s attitude towards the handicapped. The family should create an environment where children observe and learn positive patterns of behaviour towards people with disabilities which, in turn, form the basis upon which children’s attitudes are shaped. The process of perception of other people is dependent on many factors – one of them is the family. The author draws attention to the issue of gender in disability. The term “disabled person” turns out to be gender neutral. Women with disabilities consider themselves to be treated as a “third sex”. The discrimination of disabled women results from a lack of sensitivity to the sex of the disabled. This points out the need to change the attitudes towards people with disabilities in early childhood as well as the necessity to pay more attention to the gender of disabled children. Sex becomes a matter which is forgotten, perhaps even becoming irrelevant. Women and their function are pushed into the background, which results in the gender-related stereotyping of their social roles, a more difficult way of career advancement (the so-called “glass ceiling effect”, lower wages for women working in the same positions as men, and the low participation of women in public life.

  2. Effect of Processing Conditions of 75Li2S-25P2S5 Solid Electrolyte on its DC Electrochemical Behavior

    International Nuclear Information System (INIS)

    Garcia-Mendez, Regina; Mizuno, Fuminori; Zhang, Ruigang; Arthur, Timothy S.; Sakamoto, Jeff

    2017-01-01

    Highlights: • The highly conductive thio-LiSICON III analog phase formed when hot pressing LPS between 170–250 °C. • The low conductivity Li 3 PS 4 phase formed when hot pressing LPS at 300 °C. • Obtaining LPS glass-ceramic through hot pressing increased the rate at which current can be passed through the cell before short circuit is observed. • The critical current density is affected by the LPS phase present and adhesion between particles. - Abstract: The effect of processing conditions of the 75Li 2 S-25P 2 S 5 (LPS) on the Li/LPS DC electrochemical stability was investigated. LPS was densified by compacting at room temperature, and hot pressed between 130–300 °C, 47 MPa. The relative density (80% for all samples) was not affected by the hot pressing temperature, which was likely due to insufficient bulk diffusion (at the pressure used within the temperature range selected) to promote densification. The highly conductive meta-stable crystalline phase (thio-LiSICON III analog) precipitated from the mother glass when hot pressing between 170 − 250 °C and the low conductivity Li 3 PS 4 phase formed when hot pressing at 300 °C. The Li/LPS DC electrochemical stability was characterized as a function of current density between 0.01–1.0 mA· cm −2 . Two phenomena were observed; first, as the current density increased, deviation from Ohmic behavior was observed, manifested in an increase in output potential difference. Second, as the current density was further increased, a drop in cell potential was observed followed by an output potential difference instability; likely consistent with short-circuiting caused by Li metal propagation. The highest critical current density, at which short circuit occurs, resulted when hot pressing at 170 °C, reaching 1.0 mA· cm −2 . In general, obtaining LPS glass-ceramic through hot pressing increased the rate at which current can be passed through the cell. It is believed that further atomic

  3. Spent coffee-based activated carbon: specific surface features and their importance for H2S separation process.

    Science.gov (United States)

    Kante, Karifala; Nieto-Delgado, Cesar; Rangel-Mendez, J Rene; Bandosz, Teresa J

    2012-01-30

    Activated carbons were prepared from spent ground coffee. Zinc chloride was used as an activation agent. The obtained materials were used as a media for separation of hydrogen sulfide from air at ambient conditions. The materials were characterized using adsorption of nitrogen, elemental analysis, SEM, FTIR, and thermal analysis. Surface features of the carbons depend on the amount of an activation agent used. Even though the residual inorganic matter takes part in the H(2)S retention via salt formation, the porous surface of carbons governs the separation process. The chemical activation method chosen resulted in formation of large volume of pores with sizes between 10 and 30Å, optimal for water and hydrogen sulfide adsorption. Even though the activation process can be optimized/changed, the presence of nitrogen in the precursor (caffeine) is a significant asset of that specific organic waste. Nitrogen functional groups play a catalytic role in hydrogen sulfide oxidation. Copyright © 2011 Elsevier B.V. All rights reserved.

  4. The Development of a General Purpose ARM-based Processing Unit for the ATLAS TileCal sROD

    CERN Document Server

    Cox, Mitchell Arij; The ATLAS collaboration; Mellado Garcia, Bruce Rafael

    2015-01-01

    The Large Hadron Collider at CERN generates enormous amounts of raw data which present a serious computing challenge. After Phase-II upgrades in 2022, the data output from the ATLAS Tile Calorimeter will increase by 200 times to 41 Tb/s! ARM processors are common in mobile devices due to their low cost, low energy consumption and high performance. It is proposed that a cost-effective, high data throughput Processing Unit (PU) can be developed by using several consumer ARM processors in a cluster configuration to allow aggregated processing performance and data throughput while maintaining minimal software design difficulty for the end-user. This PU could be used for a variety of high-level functions on the high-throughput raw data such as spectral analysis and histograms to detect possible issues in the detector at a low level. High-throughput I/O interfaces are not typical in consumer ARM System on Chips but high data throughput capabilities are feasible via the novel use of PCI-Express as the I/O interface ...

  5. Circumferential welding applied for inox steel super duplex UNS S32750 using the process MIG using CMT® control

    International Nuclear Information System (INIS)

    Invernizzi, Bruno Pizol

    2017-01-01

    This study carried out circumferential welding experiments in UNS S32750 Super Duplex Stainless Steel tubes using diameters of 19,05 mm and 48,20 mm. Welds were performed using various welding parameters on a MIG machine with Cold Metal Transfer® CMT control. The weld joints were evaluated by visual and dimensional inspection in addition to the Vickers microhardness and traction tests, as well as the microstructural analysis in conjunction with phase precipitation analysis, which was performed according to practice A of ASTM A923, and corrosion test in accordance with practice A of ASTM G48 in conjunction with ASTM A923. The results indicated that welds performed in pipes with a diameter of 19.05 mm showed a weld joint with unacceptable dimensions according to the standard, this condition being attributed the use of a high wire diameter for the welding conditions used. Welding performed for pipes with a diameter of 48.20 mm showed a lack of penetration under the conditions employed when welded by the conventional CMT® process. In the case of the use of CMT® combined with pulsed arc, under conditions that generated greater heat input during welding, this resulted in total penetration of the joint and adequate surface finish. The results indicated that welding using the CMT® process combined with pulsed arc, under the conditions (parameters) employed generated good surface finish, combined mechanical properties, meeting standards requirements, as well as a balanced microstructure and high resistance to corrosion. (author)

  6. The Development of a General Purpose ARM-based Processing Unit for the TileCal sROD

    CERN Multimedia

    Cox, Mitchell A

    2014-01-01

    The Large Hadron Collider at CERN generates enormous amounts of raw data which present a serious computing challenge. After planned upgrades in 2022, the data output from the ATLAS Tile Calorimeter will increase by 200 times to 41 Tb/s! ARM processors are common in mobile devices due to their low cost, low energy consumption and high performance. It is proposed that a cost-effective, high data throughput Processing Unit (PU) can be developed by using several consumer ARM processors in a cluster configuration to allow aggregated processing performance and data throughput while maintaining minimal software design difficulty for the end-user. This PU could be used for a variety of high-level functions on the high-throughput raw data such as spectral analysis and histograms to detect possible issues in the detector at a low level. High-throughput I/O interfaces are not typical in consumer ARM System on Chips but high data throughput capabilities are feasible via the novel use of PCI-Express as the I/O interface t...

  7. Determining the effective indices on export development of Iran’s office furniture thereby analytical hierarchy process (AHP

    Directory of Open Access Journals (Sweden)

    Hasan Alizadeh

    2014-11-01

    Full Text Available Furniture industry is one of the most important employment and wealth productive industries, and also one major category in developing countries. This study aimed on determining the effective indices on export development of office furniture throughout the analytical hierarchy process (AHP and also by group decision. For this, imports and exports of office furniture were determined through visiting the custom office of Islamic Republic of Iran. By then, after initial studies, furniture industry and relevant experts were interviewed to recognize the effective indices on export development, and specified indices were categorized on six main groups and forty-eight sub-index. After receiving the comments of experts, degree of importance of indices and sub-indices determined thereby Expert Choice software. Results showed that raw material and product has been chosen among the major indices. Among the 48 influential sub-indices also product designing, guaranty and costumer services, quality control, custom tariffs, and strategic marketing had highest value-weighted priorities in export development of office furniture, respectively. Regarding to government’s policies and decisions in wood raw materials extent, monetary and banking system and marketing infrastructures, to maintain the productivity competitiveness of Iran’s furniture industry in first step, and to achieve to the export markets in second step, full cooperation of government with furniture industry is necessary provision for participating of this industry in global markets.

  8. Electrical characterization of CdTe grain-boundary properties from as processed CdTe/CdS solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Woods, L.M.; Robinson, G.Y. [Colorado State Univ., Fort Collins, CO (United States); Levi, D.H.; Ahrenkiel, R.K. [National Renewable Energy Lab., Golden, CO (United States); Kaydanov, V. [Colorado School of Mines, Golden, CO (United States)

    1998-09-01

    An ability to liftoff or separate the thin-film polycrystalline CdTe from the CdS, without the use of chemical etches, has enabled direct electrical characterization of the as-processed CdTe near the CdTe/CdS heterointerface. The authors use this ability to understand how a back-contact, nitric-phosphoric (NP) etch affects the grain boundaries throughout the film. Quantitative determination of the grain-boundary barrier potentials and estimates of doping density near the grain perimeter are determined from theoretical fits to measurements of the current vs. temperature. Estimates of the bulk doping are determined from high-frequency resistivity measurements. The light and dark barrier potentials change after the NP etch, and the origin of this change is postulated. Also, a variable doping density within the grains of non-etched material has been determined. These results allow a semi-quantitative grain-boundary band diagram to be drawn that should aid in determining more accurate two-dimensional models for polycrystalline CdTe solar cells.

  9. Nurturing the Growing Generation’s Values in the Process of Socio-Cultural Transformation of Society

    Directory of Open Access Journals (Sweden)

    Asbi Khaleb

    2012-01-01

    Full Text Available The Arab minority in Israel is in the process of socio-cultural transformation, its force rising and splitting the society. Modernization, the Arab society undergoes, is influenced by the constant contacts with the Jew- ish nation representing in its majority the western culture, the other influenc- ing factors being technologies and mass media. Some changes affect the soci- ety in a positive way, whereas the global uncontrollable ones can bring about the system crisis and the full split of society. In order to retain the integrity it is necessary to control this process on the level of basic elements of cultural awareness by nurturing both cultural and moral values within the framework of educational system. One of the main functions of educational system is the man’s adapta- tion in society including its cultural aspect; and the upbringing process should be performed in the context of belonging to cultural and national val- ues. Well-balanced organic system of education combining cardinal, national and religious values can facilitate harmonious personal growth, and affect the society in a positive way. However, the Arab educational system in Israel faces some challenges in the course of implementing the value nurturing programs. They include the lack of political initiative and control over the educational system devel- opment performed by the Arabs; and the absence of the definite and steady value system that can be given to the growing generation by means of school education. To overcome the problem the author recommends developing and implementing a special training program focused on the value component de- velopment, as the students might have difficulty getting by in the real world without it. 

  10. The destabilization of the Pilatte hut (2577 m a.s.l. - Ecrins massif, France), a paraglacial process?

    Science.gov (United States)

    Ravanel, Ludovic; Dubois, Laurent; Fabre, Sébastien; Duvillard, Pierre-Allain; Deline, Philip

    2015-04-01

    The Pilatte hut is located at 2572 m a.s.l. at Saint-Christophe-en-Oisans (south of the Ecrins Massif, France), at a 3-hours-walk from La Bérarde hamlet. Its capacity is 120 beds for hikers and climbers who are engaged in the ascent of Les Bans (3669 m a.s.l.). Built on a rocky ledge on the right side of the Pilatte Glacier (A = 2.64 km2; L = 2.6 km), it currently dominates the glacier by about 150 m. This relief results from the retreat of the glacier since the end of the Little Ice Age, as the till around the hut was deposited during this stage. The glacier has lost about 1.8 km in length during the same period. A first wooden hut was built in 1925 and presently serves as a winter refuge. In 1954, the growth of mountain activities led to the construction of a larger hut made of cemented stones. An extension to the west made of reinforced concrete was built in 1994. But in the late 1980s, severe damages to the 1954 part of the building were already recognized: vertical cracks lining the north and south facades, ,subsidence (c. 10 cm downstream) of the ground floor, cracked interior walls. Currently, the evolution of the instability is monitored by several methods: - since 2003, cracks in the building are surveyed by 25 Saugnac gauges, while an outside fracture in the rock is surveyed by a simple extensometer; - since 2009, 8 strain gauges allow to annually measure displacements along the main fractures that delimit the unstable rock mass; - a high-resolution topographic data set acquired by terrestrial laser scanning from the surface of the glacier in July 2014 has completed the monitoring. The acting process is a translational slide of a rock mass with a volume of about 300 000 m3, initiated by the glacier shrinkage. Therefore, it has to be considered as a paraglacial process. Even if the slide velocity is presently decreasing, a demolition project of the hut is under consideration in favor of a new building on the right side of the valley, 800 m downstream the

  11. H{sub 2}S Removal in Anaerobic digestion of Sludge by Microaerophilic Processes: Pilot Plant Experience; Eliminacion de H{sub 2}S en digestion anaerobia de lodos por procesos microaerofilico: experiencia en planta piloto

    Energy Technology Data Exchange (ETDEWEB)

    Fdz-Polanco Iniguez de la Torre, M.; Perez Elvira, S. I.; Diaz Villalobos, I.; Garcia Rodriguez, L.; Torio Acha, R.; Acevedo Alvarez, A. F.

    2009-07-01

    Anaerobic digestion of sludge produces a biogas with content in H{sub 2}S between 4.000-6.000 ppm, Removal strategies can operate at three different levels: (1) at the source (source control), (2) at process level or (3) at the end (biogas treatment). Process-level control of sulfide presents several advantages when comparing with traditional biogas treatment. Microaerophilic process consists on the supply of small amounts of oxygen in the digester in order to completely remove H{sub 2}S without affect the anaerobic process. (Author) 9 refs.

  12. Review of SKB's Work on Coupled THM Processes Within SR-Can. External review contribution in support of SKI's and SSI's review of SR-Can

    Energy Technology Data Exchange (ETDEWEB)

    Rutqvist, Jonny; Chin-Fu Tsang (Lawrence Berkeley National Laboratory, Berkeley, CA (US))

    2008-03-15

    In this report, we scrutinize the work by the Swedish Nuclear Fuel and Waste Management Company (SKB) related to coupled thermal, hydrological and mechanical (THM) processes within the SR-Can project. SR-Can is SKB's preliminary assessment of long-term safety for a KBS-3 nuclear waste repository, and is a preparation stage for the SR-Site assessment, the report that will be used in SKB's application for a final repository. We scrutinize SKB's work related to THM processes through review and detailed analysis, using an independent modeling tool. The modeling tool is applied to analyze coupled THM processes at the two candidate sites, Forsmark and Laxemar, using data defined in SKB's site description models for respective sites. In this report, we first provide a brief overview of SKB's work related to analysis of the evolution of coupled THM processes as presented in SRCan, as well as supporting documents. In this overview we also identify issues and assumptions that we then analyze using our modeling tool. The overview and subsequent independent model analysis addresses issues related to near-field behavior, such as buffer resaturation and the evolution of the excavation-disturbed zone, as well as far-field behavior, such as stress induced changes in hydrologic properties. Based on the review and modeling conducted in this report, we conclude by identifying a number of areas of weaknesses, where we believe further work and clarifications are needed. Some of the most important ones are summarized below: 1) We found that SKB's calculation of peak temperature might not have been conducted for the most conservative case of extreme drying of the buffer under dry rock conditions and an unexpectedly high thermal diffusion coefficient. Our alternative analysis indicates that temperatures close to 100 might be achieved under unfavorable (and perhaps unexpected) conditions in which the buffer is dried to below 20% near the canister. We believe

  13. Technological innovation and convergent journalism. Case study on the transformation process of Bavaria’s public broadcasting service

    Directory of Open Access Journals (Sweden)

    Klaus MEIER

    2017-01-01

    Full Text Available As a consequence of technological innovations and their social utilisation, media organisations and newsrooms are undergoing a fundamental transformation process. This article analyses the interrelations between technological innovations and the challenges of convergent journalism. Studies conducted on newsroom convergence to date set out from one-sided influences: They investigated the extent to which technical innovations determine the newsrooms, or whether journalistic structures and long-range trends are so strong as to largely obstruct the adoption of new technologies in journalism. Therefore technology — especially in studies carried out on newsroom convergence — is considered as an influencing factor on somehow resisting or non-resisting newsrooms. We broaden the scope of this investigation by considering that any such influence might not come exclusively from technology, but that impulses can come also from innovative newsrooms: technological gaps, wishes and obstacles are identified from the journalist's viewpoint and brought to the attention of the developers of newsroom technologies — on the basis of empirical research findings from a case study of Bavaria’s public broadcasting service, Bayerischer Rundfunk (BR. With its 5.000 employees, BR is one of Germany's largest media organisations. It is undergoing a fundamental and long-term convergence process. A variety of gaps, problems and wishes came to light from 25 in-depth interviews with journalists working on innovative projects. For example, criticism is expressed of complicated, partly unknown or non-existent networking of cross-media production systems. There is a desire for the increased use of consumer devices like smartphones in professional news production. There exists a creative potential for innovative solutions, but these are not comprehensively evaluated. To date, there has been no systematic implementation of the findings of innovative media projects in everyday

  14. Process evaluation of knowledge transfer across industries: Leveraging Coca-Cola’s supply chain expertise for medicine availability in Tanzania

    Science.gov (United States)

    Yuan, Christina T.; Ahmed, Shirin; Cherlin, Emily; Talbert-Slagle, Kristina; Curry, Leslie A.

    2017-01-01

    Persistent gaps in the availability of essential medicines have slowed the achievement of global health targets. Despite the supply chain knowledge and expertise that ministries of health might glean from other industries, limited empirical research has examined the process of knowledge transfer from other industries into global public health. We examined a partnership designed to improve the availability of medical supplies in Tanzania by transferring knowledge from The Coca-Cola system to Tanzania’s Medical Stores Department (MSD). We conducted a process evaluation including in-depth interviews with 70 participants between July 2011 and May 2014, corresponding to each phase of the partnership, with focus on challenges and strategies to address them, as well as benefits perceived by partners. Partners faced challenges in (1) identifying relevant knowledge to transfer, (2) translating operational solutions from Coca-Cola to MSD, and (3) maintaining momentum between project phases. Strategies to respond to these challenges emerged through real-time problem solving and included (1) leveraging the receptivity of MSD leadership, (2) engaging a boundary spanner to identify knowledge to transfer, (3) promoting local recognition of commonalities across industries, (4) engaging external technical experts to manage translation activities, (5) developing tools with visible benefits for MSD, (6) investing in local relationships, and (7) providing time and space for the partnership model to evolve. Benefits of the partnership perceived by MSD staff included enhanced collaboration and communication, more proactive orientations in managing operations, and greater attention to performance management. Benefits perceived by Coca-Cola staff included strengthened knowledge transfer capability and enhanced job satisfaction. Linking theoretical constructs with practical experiences from the field, we highlight the challenges, emergent strategies, and perceived benefits of a

  15. P19-S Managing Proteomics Data from Data Generation and Data Warehousing to Central Data Repository and Journal Reviewing Processes

    Science.gov (United States)

    Thiele, H.; Glandorf, J.; Koerting, G.; Reidegeld, K.; Blüggel, M.; Meyer, H.; Stephan, C.

    2007-01-01

    In today’s proteomics research, various techniques and instrumentation bioinformatics tools are necessary to manage the large amount of heterogeneous data with an automatic quality control to produce reliable and comparable results. Therefore a data-processing pipeline is mandatory for data validation and comparison in a data-warehousing system. The proteome bioinformatics platform ProteinScape has been proven to cover these needs. The reprocessing of HUPO BPP participants’ MS data was done within ProteinScape. The reprocessed information was transferred into the global data repository PRIDE. ProteinScape as a data-warehousing system covers two main aspects: archiving relevant data of the proteomics workflow and information extraction functionality (protein identification, quantification and generation of biological knowledge). As a strategy for automatic data validation, different protein search engines are integrated. Result analysis is performed using a decoy database search strategy, which allows the measurement of the false-positive identification rate. Peptide identifications across different workflows, different MS techniques, and different search engines are merged to obtain a quality-controlled protein list. The proteomics identifications database (PRIDE), as a public data repository, is an archiving system where data are finally stored and no longer changed by further processing steps. Data submission to PRIDE is open to proteomics laboratories generating protein and peptide identifications. An export tool has been developed for transferring all relevant HUPO BPP data from ProteinScape into PRIDE using the PRIDE.xml format. The EU-funded ProDac project will coordinate the development of software tools covering international standards for the representation of proteomics data. The implementation of data submission pipelines and systematic data collection in public standards–compliant repositories will cover all aspects, from the generation of MS data

  16. Anaerobic treatment for C and S removal in 'zero-discharge' paper mills: effects of process design on S removal efficiencies.

    NARCIS (Netherlands)

    Lier, van J.B.; Lens, P.N.L.; Hulshoff Pol, L.W.

    2001-01-01

    Stringent environmental laws in Europe and Northern America lead to the development towards closure of the process water streams in pulp and paper mills. Application of a "zero-discharge" process is already a feasible option for the board and packaging paper industry, provided in-line treatment is

  17. Design and analysis of an integrated pulse modulated s-band power amplifier in gallium nitride process

    Energy Technology Data Exchange (ETDEWEB)

    Sedlock, Steve [Kansas State Univ., Manhattan, KS (United States)

    2012-01-01

    The design of power amplifiers in any semi-conductor process is not a trivia exercise and it is often encountered that the simulated solution is qualitatively different than the results obtained. Phenomena such as oscillation occurring either in-band or out of band and sometimes at subharmonic intervals, continuous spectrum noticed in some frequency bands, often referred to as chaos, and jumps and hysteresis effects can all be encountered and render a design useless. All of these problems might have been identified through a more rigorous approach to stability analysis. Designing for stability is probably the one area of amplifier design that receives the least amount of attention but incurs the most catastrophic of effects if it is not performed properly. Other parameters such as gain, power output, frequency response and even matching may suitable mitigation paths. But the lack of stability in an amplifier has no mitigating path. In addition to of loss of the design completely there are the increased production cycle costs, costs involved with investigating and resolving the problem and the costs involved with schedule slips or delays resulting from it. The Linville or Rollett stability criteria that many microwave engineers follow and rely exclusively on is not sufficient by itself to ensure a stable and robust design. It will be shown that the universal belief that unconditional stability is obtained through an analysis of the scattering matrix S to determine if 1 and |{Delta}{sub S}| < 1 is only part of the procedure and other tools must be used to validate the criteria. The research shown contributes to the state of the art by developing a more thorough stability design technique for designing amplifiers of any class, whether that be current mode or switch mode, than is currently undertaken with the goal of obtaining first pass design success.

  18. Enforcement Alert: Hazardous Waste Management Practices at Mineral Processing Facilities Under Scrutiny by U.S. EPA; EPA Clarifies 'Bevill Exclusion' Wastes and Establishes Disposal Standards

    Science.gov (United States)

    This is the enforcement alert for Hazardous Waste Management Practices at Mineral Processing Facilities Under Scrutiny by U.S. EPA; EPA Clarifies 'Bevill Exclusion' Wastes and Establishes Disposal Standards

  19. The Mediation of Mothers’ Self-Fulfilling Effects on Their Children’s Alcohol Use: Self-Verification, Informational Conformity and Modeling Processes

    Science.gov (United States)

    Madon, Stephanie; Guyll, Max; Buller, Ashley A.; Scherr, Kyle C.; Willard, Jennifer; Spoth, Richard

    2010-01-01

    This research examined whether self-fulfilling prophecy effects are mediated by self-verification, informational conformity, and modeling processes. The authors examined these mediational processes across multiple time frames with longitudinal data obtained from two samples of mother – child dyads (N1 = 487; N2 = 287). Children’s alcohol use was the outcome variable. The results provided consistent support for the mediational process of self-verification. In both samples and across several years of adolescence, there was a significant indirect effect of mothers’ beliefs on children’s alcohol use through children’s self-assessed likelihood of drinking alcohol in the future. Comparatively less support was found for informational conformity and modeling processes as mediators of mothers’ self-fulfilling effects. The potential for self-fulfilling prophecies to produce long lasting changes in targets’ behavior via self-verification processes are discussed. PMID:18665708

  20. Effect of process variables on the quality characteristics of pelleted wheat distiller's dried grains with solubles

    Energy Technology Data Exchange (ETDEWEB)

    Jaya Shankar Tumuluru; Lope Tabil; Anthony Opoku; Maria Rosario Mosqueda; Olaniyi Fadeyi

    2011-04-01

    The rapid expansion of ethanol processing plants in Canada has resulted in a significant increase in the production of wheat-based distiller's dried grains with solubles (DDGS). Transportation and flowability problems associated with DDGS necessitate investigations on pelleting. In the present study, the effect of process variables like die temperature (T) and feed moisture content (Mw) on the pellet properties like pellet moisture content, durability and pellet density was explored using a single pelleting machine; further studies on pelleting DDGS using a pilot-scale pellet mill were also conducted to understand the effect of die diameter and steam conditioning on durability and bulk density of pellets. Proximate analysis of DDGS indicated that crude protein and dry matter were in the range of 37.37–40.33% and 91.27–92.60%, respectively. Linear regression models developed for pellet quality attributes like pellet moisture content, pellet density and durability adequately described the single pelleting process with R2 value of 0.97, 0.99 and 0.7, respectively. ANOVA results have indicated that linear terms T and Mw and the interaction term T × Mw were statistically significant at P < 0.01 and P < 0.1 for pellet moisture content and pellet density. Based on the trends of the surface plots, a medium T of about 50–80 °C and a low Mw of about 5.1% resulted in maximum pellet density and durability and minimum pellet moisture content. Results from pilot-scale studies indicated that bulk density, durability and throughput values were 436.8–528.9 kg m-3, 60.3–92.7% and 45.52–68.77 kg h-1, respectively. It was observed that both die diameter and steam addition had a significant effect on the bulk density and the durability values. The highest bulk density and durability were achieved with 6.4 mm die diameter with steam addition compared to 7.9 mm die with or without steam addition.