WorldWideScience

Sample records for pump laser upgrade

  1. The ISOLDE RILIS pump laser upgrade and the LARIS Laboratory

    CERN Document Server

    Marsh, B A; Fedorov, D V; Fedosseev, V N; Launila, O J; Lindroos, M; Losito, R; Osterdahl, F K; Pauchard, T; Pohjalainen, I T; Sassenberg, U; Seliverstov, M DSt. Petersburg, INP; Sjödin, A M; Tranströmer, G

    2010-01-01

    On account of its high efficiency, speed and unmatched selectivity, the Resonance Ionization Laser Ion Source (RILIS) is the preferred method for ionizing the nuclear reaction products at the ISOLDE on-line isotope separator facility. [...

  2. Nuclear-pumped lasers

    CERN Document Server

    Prelas, Mark

    2016-01-01

    This book focuses on Nuclear-Pumped Laser (NPL) technology and provides the reader with a fundamental understanding of NPLs, a review of research in the field, and exploration of large scale NPL system design and applications. Early chapters look at the fundamental properties of lasers, nuclear-pumping and nuclear reactions that may be used as drivers for nuclear-pumped lasers. The book goes on to explore the efficient transport of energy from the ionizing radiation to the laser medium and then the operational characteristics of existing nuclear-pumped lasers. Models based on Mathematica, explanations and a tutorial all assist the reader’s understanding of this technology. Later chapters consider the integration of the various systems involved in NPLs and the ways in which they can be used, including beyond the military agenda. As readers will discover, there are significant humanitarian applications for high energy/power lasers, such as deflecting asteroids, space propulsion, power transmission and mining....

  3. Diode-pumped dye laser

    Science.gov (United States)

    Burdukova, O. A.; Gorbunkov, M. V.; Petukhov, V. A.; Semenov, M. A.

    2016-10-01

    This letter reports diode pumping for dye lasers. We offer a pulsed dye laser with an astigmatism-compensated three-mirror cavity and side pumping by blue laser diodes with 200 ns pulse duration. Eight dyes were tested. Four dyes provided a slope efficiency of more than 10% and the highest slope efficiency (18%) was obtained for laser dye Coumarin 540A in benzyl alcohol.

  4. Lasers with nuclear pumping

    CERN Document Server

    Melnikov, S P; Sizov, A N; Miley, George H

    2015-01-01

    This book covers the history of lasers with nuclear pumping (Nuclear Pumped Lasers, NPLs). This book showcases the most important results and stages of NPL development in The Russian Federal Nuclear Center (VNIIEF) as well as other Russian and international laboratories, including laboratories in the United States. The basic science and technology behind NPLs along with potential applications are covered throughout the book. As such, this book: ·         Contains a historical overview of the extensive information developed over the past 40 years of work on NPLs ·         Covers the most important results and stages of NPL development, not just in the Russian Federal Nuclear Center, VNIIEF, but also in other laboratories in Russia, the United States , and some other scattered international laboratories ·         Systematizes the fragmented information accumulated over these years of very active research and development As the first comprehensive discussion of NPLs, students, research...

  5. Nuclear pumped gas laser research

    Science.gov (United States)

    Thom, K.

    1976-01-01

    Nuclear pumping of lasers by fission-fragments from nuclear chain reactions is discussed. Application of the newly developed lasers to spacecraft propulsion or onboard power, to lunar bases for industrial processing, and to earth for utilization of power without pollution and hazards is envisioned. Emphasis is placed on the process by which the fission-fragement kinetic energy is converted into laser light.

  6. Pumping of titanium sapphire laser

    Science.gov (United States)

    Jelínková, H.; Vaněk, P.; Valach, P.; Hamal, K.; Kubelka, J.; Škoda, V.; Jelínek, M.

    1993-02-01

    Two methods of Ti:Sapphire pumping for the generation of tunable laser radiation in the visible region were studied. For coherent pumping, the radiation of the second harmonic of a Nd:YAP laser was used and a maximum output energy of E out=4.5 mJ was reached from the Ti:Sapphire laser. For noncoherent pumping, two different lengths of flashlamp pulses were used and a maximum of E out=300 mJ was obtained. Preliminary estimations of the wavelength range of tunability were made.

  7. Mold Heating and Cooling Pump Package Operator Interface Controls Upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Josh A. Salmond

    2009-08-07

    The modernization of the Mold Heating and Cooling Pump Package Operator Interface (MHC PP OI) consisted of upgrading the antiquated single board computer with a proprietary operating system to off-the-shelf hardware and off-the-shelf software with customizable software options. The pump package is the machine interface between a central heating and cooling system that pumps heat transfer fluid through an injection or compression mold base on a local plastic molding machine. The operator interface provides the intelligent means of controlling this pumping process. Strict temperature control of a mold allows the production of high quality parts with tight tolerances and low residual stresses. The products fabricated are used on multiple programs.

  8. Laser Guide Star Facility Upgrade

    Science.gov (United States)

    Lewis, S.; Calia, D. B.; Buzzoni, B.; Duhoux, P.; Fischer, G.; Guidolin, I.; Haimerl, A.; Hackenberg, W.; Hinterschuster, R.; Holzlöhner, R.; Jolley, P.; Pfrommer, T.; Popovic, D.; Alvarez, J.-L.; Beltran, J.; Girard, J.; Pallanca, L.; Riquelme, M.; Gonte, F.

    2014-03-01

    The Laser Guide Star Facility is part of VLT Unit Telescope 4 and provides a single centre-launched sodium beacon for the two adaptive optics instruments SINFONI and NACO. The original facility, installed in 2006, employed a high-power dye laser source, PARSEC, producing an output beam that was delivered via a single-mode optical fibre to launch optics located behind the telescope secondary mirror. We recently installed a new prototype laser source, PARLA, based on Raman optical fibre technology. Requirements for the new laser include start-up times compatible with flexible observing, an output beam appropriate for the existing fibre-delivery system and an on-sky power of up to 7 watts. This is the first time that this type of laser has been deployed at a major observing facility, and it has a pathfinder role for future adaptive optics systems. Reported here are the main results of the development, deployment and early operation since the resumption of science operation in February 2013.

  9. Diode Pumped Fiber Laser.

    Science.gov (United States)

    1984-12-01

    FIBER LASERS I. Nd:YAG FIBER LASER FABRICATION .............. 5 A. FIBER GROWTH .......................... 5 B. FIBER PROCESSING 7...1.32 pm FIBER LASERS I. Nd:YAG FIBER LASER FABRICATION A. FIBER GROWTH The single crystal fibers used in this work were grown at Stanford University

  10. Transverse pumped laser amplifier architecture

    Science.gov (United States)

    Bayramian, Andrew James; Manes, Kenneth; Deri, Robert; Erlandson, Al; Caird, John; Spaeth, Mary

    2013-07-09

    An optical gain architecture includes a pump source and a pump aperture. The architecture also includes a gain region including a gain element operable to amplify light at a laser wavelength. The gain region is characterized by a first side intersecting an optical path, a second side opposing the first side, a third side adjacent the first and second sides, and a fourth side opposing the third side. The architecture further includes a dichroic section disposed between the pump aperture and the first side of the gain region. The dichroic section is characterized by low reflectance at a pump wavelength and high reflectance at the laser wavelength. The architecture additionally includes a first cladding section proximate to the third side of the gain region and a second cladding section proximate to the fourth side of the gain region.

  11. New laser materials for laser diode pumping

    Science.gov (United States)

    Jenssen, H. P.

    1990-01-01

    The potential advantages of laser diode pumped solid state lasers are many with high overall efficiency being the most important. In order to realize these advantages, the solid state laser material needs to be optimized for diode laser pumping and for the particular application. In the case of the Nd laser, materials with a longer upper level radiative lifetime are desirable. This is because the laser diode is fundamentally a cw source, and to obtain high energy storage, a long integration time is necessary. Fluoride crystals are investigated as host materials for the Nd laser and also for IR laser transitions in other rare earths, such as the 2 micron Ho laser and the 3 micron Er laser. The approach is to investigate both known crystals, such as BaY2F8, as well as new crystals such as NaYF8. Emphasis is on the growth and spectroscopy of BaY2F8. These two efforts are parallel efforts. The growth effort is aimed at establishing conditions for obtaining large, high quality boules for laser samples. This requires numerous experimental growth runs; however, from these runs, samples suitable for spectroscopy become available.

  12. Electron beam pumped semiconductor laser

    Science.gov (United States)

    Hug, William F. (Inventor); Reid, Ray D. (Inventor)

    2009-01-01

    Electron-beam-pumped semiconductor ultra-violet optical sources (ESUVOSs) are disclosed that use ballistic electron pumped wide bandgap semiconductor materials. The sources may produce incoherent radiation and take the form of electron-beam-pumped light emitting triodes (ELETs). The sources may produce coherent radiation and take the form of electron-beam-pumped laser triodes (ELTs). The ELTs may take the form of electron-beam-pumped vertical cavity surface emitting lasers (EVCSEL) or edge emitting electron-beam-pumped lasers (EEELs). The semiconductor medium may take the form of an aluminum gallium nitride alloy that has a mole fraction of aluminum selected to give a desired emission wavelength, diamond, or diamond-like carbon (DLC). The sources may be produced from discrete components that are assembled after their individual formation or they may be produced using batch MEMS-type or semiconductor-type processing techniques to build them up in a whole or partial monolithic manner, or combination thereof.

  13. Compact and highly efficient laser pump cavity

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Jim J. (Dublin, CA); Bass, Isaac L. (Castro Valley, CA); Zapata, Luis E. (Livermore, CA)

    1999-01-01

    A new, compact, side-pumped laser pump cavity design which uses non-conventional optics for injection of laser-diode light into a laser pump chamber includes a plurality of elongated light concentration channels. In one embodiment, the light concentration channels are compound parabolic concentrators (CPC) which have very small exit apertures so that light will not escape from the pumping chamber and will be multiply reflected through the laser rod. This new design effectively traps the pump radiation inside the pump chamber that encloses the laser rod. It enables more uniform laser pumping and highly effective recycle of pump radiation, leading to significantly improved laser performance. This new design also effectively widens the acceptable radiation wavelength of the diodes, resulting in a more reliable laser performance with lower cost.

  14. Materials for diode pumped solid state lasers

    Science.gov (United States)

    Chase, L. L.; Davis, L. E.; Krupke, W. F.; Payne, S. A.

    1991-07-01

    The advantages of semiconductor diode lasers and laser arrays as pump sources for solid state lasers are reviewed. The properties that are desirable in solid state laser media for various diode pumping applications are discussed, and the characteristics of several promising media are summarized.

  15. Diode-pumped laser altimeter

    Science.gov (United States)

    Welford, D.; Isyanova, Y.

    1993-01-01

    TEM(sub 00)-mode output energies up to 22.5 mJ with 23 percent slope efficiencies were generated at 1.064 microns in a diode-laser pumped Nd:YAG laser using a transverse-pumping geometry. 1.32-micron performance was equally impressive at 10.2 mJ output energy with 15 percent slope efficiency. The same pumping geometry was successfully carried forward to several complex Q-switched laser resonator designs with no noticeable degradation of beam quality. Output beam profiles were consistently shown to have greater than 90 percent correlation with the ideal TEM(sub 00)-order Gaussian profile. A comparison study on pulse-reflection-mode (PRM), pulse-transmission-mode (PTM), and passive Q-switching techniques was undertaken. The PRM Q-switched laser generated 8.3 mJ pulses with durations as short as 10 ns. The PTM Q-switch laser generated 5 mJ pulses with durations as short as 5 ns. The passively Q-switched laser generated 5 mJ pulses with durations as short as 2.4 ns. Frequency doubling of both 1.064 microns and 1.32 microns with conversion efficiencies of 56 percent in lithium triborate and 10 percent in rubidium titanyl arsenate, respectively, was shown. Sum-frequency generation of the 1.064 microns and 1.32 microns radiations was demonstrated in KTP to generate 1.1 mJ of 0.589 micron output with 11.5 percent conversion efficiency.

  16. Diode-pumped laser with improved pumping system

    Science.gov (United States)

    Chang, Jim J.

    2004-03-09

    A laser wherein pump radiation from laser diodes is delivered to a pump chamber and into the lasing medium by quasi-three-dimensional compound parabolic concentrator light channels. The light channels have reflective side walls with a curved surface and reflective end walls with a curved surface. A flow tube between the lasing medium and the light channel has a roughened surface.

  17. Lasers from fission. [nuclear pumping feasibility experiments

    Science.gov (United States)

    Schneider, R. T.; Thom, K.; Helmick, H. H.

    1975-01-01

    The feasibility of the nuclear pumping of lasers was demonstrated in three experiments conducted independently at three different laboratories. In this context nuclear pumping of lasers is understood to be the excitation of a laser by the kinetic energy of the fission fragments only. A description is given of research concerned with the use of nuclear energy for the excitation of gas lasers. Experimental work was supplemented by theoretical research. Attention is given to a nuclear pumped He-Xe laser, a nuclear pumped CO laser, and a neon-nitrogen laser pumped by alpha particles. Studies involving uranium hexafluoride admixture to laser media are discussed along with research on uranium hexafluoride-fueled reactors.

  18. Pulsed pumping of semiconductor disk lasers.

    Science.gov (United States)

    Hempler, Nils; Hopkins, John-Mark; Kemp, Alan J; Schulz, Nico; Rattunde, Marcel; Wagner, Joachim; Dawson, Martin D; Burns, David

    2007-03-19

    Efficient operation of semiconductor disk lasers is demonstrated using uncooled and inexpensive 905nm high-power pulsed semiconductor pump lasers. Laser emission, with a peak power of 1.7W, is obtained from a 2.3mum semiconductor disk laser. This is seven times the power achieved under continuous pumping. Analysis of the time-dependent spectral characteristics of the laser demonstrate that significant device heating occurs over the 100-200ns duration of the pumping pulse - finite element modelling of the thermal processes is undertaken in support of these data. Spectral narrowing to below 0.8nm is obtained by using an intra-cavity birefringent filter.

  19. Polarization chaos in an optically pumped laser.

    Science.gov (United States)

    Serrat, C; Kul'minskii, A; Vilaseca, R; Corbalán, R

    1995-06-15

    We study the steady-state and dynamic behavior of an optically pumped J = 0 ? J = 1 ? J = 0 laser operating with an isotropic ring cavity and an axial magnetic field. The gain anisotropy induced by a linearly polarized pump-laser f ield leads, in the steady state, to locking of the two circularly polarized components of the laser field, which acquires a linear polarization parallel to that of the pump field. In the presence of laser intensity instabilities, however, locking does not occur, and polarization instabilities appear. For the f irst time to our knowledge, polarization chaos has been found in a laser system.

  20. Cladding For Transversely-Pumped Laser Rod

    Science.gov (United States)

    Byer, Robert L.; Fan, Tso Yee

    1989-01-01

    Combination of suitable dimensioning and cladding of neodymium:yttrium aluminum garnet of similar solid-state laser provides for more efficient utilization of transversely-incident pump light from diode lasers. New design overcomes some of limitations of longitudinal- and older transverse-pumping concepts and promotes operation at higher output powers in TEM00 mode.

  1. Coherent optical pumping of semiconductor lasers

    Energy Technology Data Exchange (ETDEWEB)

    Pfister, M.; Dupertuis, M.A. [Inst. de Micro- et Optoelectronique, Lausanne (Switzerland). Dept. de Physique

    1995-01-01

    The influence of coherent optical pumping in semiconductor lasers is investigated theoretically. In particular the mathematical conditions under which an optically pumped system behaves like an electrically (incoherently) pumped system are derived. The authors show that it is practically impossible to reach the interesting regime where coherent effects are important because of the inherent constraints to absorb photons at the pump frequency and to reach threshold gain at the lasing frequency. The effects of changing the temperature and of reduced dimensionality are discussed.

  2. Tapered diode laser pumped 946 nm Nd:YAG laser

    DEFF Research Database (Denmark)

    Cheng, Haynes Pak Hay; Jensen, Ole Bjarlin; Petersen, Paul Michael

    2009-01-01

    We successfully implemented a 946 nm Nd:YAG laser based on a 808 nm tapered diode pump laser. The tapered diode is developed at the Ferdinand-Braun-Institute fur Hochstfrequenztechnik in Germany. Figure 2 shows the experimental setup and results of each pump source coupled into a 1.5 mm crystal...... laser, we show that tapered diode laser pumping potentially increase the power of 946 nm lasers by a factor of two and reduce the threshold by a factor of three....

  3. Laser-induced quantum pumping in graphene

    Energy Technology Data Exchange (ETDEWEB)

    San-Jose, Pablo [Instituto de Estructura de la Materia (IEM-CSIC), Serrano 123, 28006 Madrid (Spain); Prada, Elsa; Kohler, Sigmund [Instituto de Ciencia de Materiales de Madrid, CSIC, Cantoblanco, 28049 Madrid (Spain); Schomerus, Henning [Department of Physics, Lancaster University, Lancaster LA1 4YB (United Kingdom)

    2012-10-08

    We investigate non-adiabatic electron pumping in graphene generated by laser irradiation with linear polarization parallel or perpendicular to the transport direction. Transport is dominated by the spatially asymmetric excitation of electrons from evanescent into propagating modes. For a laser with parallel polarization, the pumping response exhibits a subharmonic resonant enhancement which directly probes the Fermi energy; no such enhancement occurs for perpendicular polarization. The resonance mechanism relies on the chirality of charge carriers in graphene.

  4. Ho:YLF pumped HBr laser

    CSIR Research Space (South Africa)

    Botha, LR

    2009-10-01

    Full Text Available . The model included rotational thermalization within a specific vibrational band as well as vibrational relaxation of both the upper and lower vibrational levels partaking in the laser action. The model is similar to that reported in [2] and [7]. The pump.... The efficiency of converting the 2 micron pump energy to 4 micron output energy is primarily controlled by the rotational and vibrational relaxation times. As the pressure of the laser medium is increased, the rotational and vibrational relaxation times...

  5. Diode pumped Nd:YAG laser development

    Science.gov (United States)

    Reno, C. W.; Herzog, D. G.

    1976-01-01

    A low power Nd:YAG laser was constructed which employs GaAs injection lasers as a pump source. Power outputs of 125 mW TEM CW with the rod at 250 K and the pump at 180 K were achieved for 45 W input power to the pump source. Operation of the laser, with array and laser at a common heat sink temperature of 250 K, was inhibited by difficulties in constructing long-life GaAs LOC laser arrays. Tests verified pumping with output power of 20 to 30 mW with rod and pump at 250 K. Although life tests with single LOC GaAs diodes were somewhat encouraging (with single diodes operating as long as 9000 hours without degradation), failures of single diodes in arrays continue to occur, and 50 percent power is lost in a few hundred hours at 1 percent duty factor. Because of the large recent advances in the state of the art of CW room temperature AlGaAs diodes, their demonstrated lifetimes of greater than 5,000 hours, and their inherent advantages for this task, it is recommended that these sources be used for further CW YAG injection laser pumping work.

  6. Semiconductor disk laser pumped Cr2+:Znse lasers.

    Science.gov (United States)

    Hempler, Nils; Hopkins, John-Mark; Rösener, Benno; Rattunde, Marcel; Wagner, Joachim; Fedorov, Vladimir V; Moskalev, Igor S; Mirov, Sergey B; Burns, David

    2009-09-28

    A new flexible pump source, the optically-pumped semiconductor disk laser (SDL), for the Cr(2+):ZnSe laser is reported. The SDL provides up to 6W output power at a free running central wavelength of 1.98 microm. The Cr(2+):ZnSe laser operated at an output power of 1.8W and a slope efficiency of approximately 50% with respect to absorbed pump power whilst maintaining a low output intensity noise figure of <0.14% RMS. The system required no optical isolation even under the situation of significant optical feedback.

  7. Solar pumped lasers and their applications

    Science.gov (United States)

    Lee, Ja H.

    Since 1980, NASA has been pursuing high power solar lasers as part of the space power beaming program. Materials in liquid, solid, and gas phases have been evaluated against the requirements for solar pumping. Two basic characteristics of solar insolation, namely its diffuse irradiance and 5800 K blackbody-like spectrum, impose rather stringent requirements for laser excitation. However, meeting these requirements is not insurmountable as solar thermal energy technology has progressed today, and taking advantage of solar pumping lasers is becoming increasingly attractive. The high density photons of concentrated solar energy have been used for mainly electric power generation and thermal processing of materials by the DOE Solar Thermal Technologies Program. However, the photons can interact with materials through many other direct kinetic paths, and applications of the concentrated photons could be extended to processes requiring photolysis, photosynthesis, and photoexcitation. The use of solar pumped lasers on Earth seems constrained by economics and sociopolitics. Therefore, prospective applications may be limited to those that require use of quantum effects and coherency of the laser in order to generate extremely high value products and services when conventional and inexpensive means are ineffective or impossible. The new applications already proposed for concentrated solar photons, such as destruction of hazardous waste, production of renewable fuel, production of fertilizer, and air/water pollution controls, may benefit from the use of inexpensive solar pumped laser matched with the photochemical kinetics of these processes.

  8. Laser performance upgrade for precise ICF experiment in SG-Ⅲ laser facility

    Directory of Open Access Journals (Sweden)

    Wanguo Zheng

    2017-09-01

    Full Text Available The SG-Ⅲ laser facility (SG-Ⅲ is the largest laser driver for inertial confinement fusion (ICF researches in China, which has 48 beamlines and can deliver 180 kJ ultraviolet laser energy in 3 ns. In order to meet the requirements of precise physics experiments, some new functionalities need to be added to SG-Ⅲ and some intrinsic laser performances need upgrade. So at the end of SG-Ⅲ's engineering construction, the 2-year laser performance upgrade project started. This paper will introduce the newly added functionalities and the latest laser performance of SG-Ⅲ. With these function extensions and performance upgrade, SG-Ⅲ is now fully prepared for precise ICF experiments and solidly paves the way towards fusion ignition.

  9. Scaling studies of solar pumped lasers

    Science.gov (United States)

    Christiansen, W. H.; Chang, J.

    1985-01-01

    A progress report of scaling studies of solar pumped lasers is presented. Conversion of blackbody radiation into laser light has been demonstrated in this study. Parametric studies of the variation of laser mixture composition and laser gas temperature were carried out for CO2 and N2O gases. Theoretical analysis and modeling of the system have been performed. Reasonable agreement between predictions in the parameter variation and the experimental results have been obtained. Almost 200 mW of laser output at 10.6 micron was achieved by placing a small sapphire laser tube inside an oven at 1500 K the tube was filled with CO2 laser gas mixture and cooled by longitudinal nitrogen gas flow.

  10. Flathead Electric Cooperative Facility Geothermal Heat Pump System Upgrade.

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Xiaobing [Oak Ridge National Lab

    2014-06-01

    High initial cost and lack of public awareness of ground source heat pump (GSHP) technology are the two major barriers preventing rapid deployment of this energy saving technology in the United States. Under the American Recovery and Reinvestment Act (ARRA), 26 GSHP projects have been competitively selected and carried out to demonstrate the benefits of GSHP systems and innovative technologies for cost reduction and/or performance improvement. This paper highlights findings of a case study of one of the ARRA-funded GSHP demonstration projects, which is a heating only central GSHP system using shallow aquifer as heat source and installed at a warehouse and truck bay at Kalispell, MT. This case study is based on the analysis of measured performance data, utility bills, and calculations of energy consumptions of conventional central heating systems for providing the same heat outputs as the central GSHP system did. The evaluated performance metrics include energy efficiency of the heat pump equipment and the overall GSHP system, pumping performance, energy savings, carbon emission reductions, and cost-effectiveness of GSHP system compared with conventional heating systems. This case study also identified areas for reducing uncertainties in performance evaluation, improving operational efficiency, and reducing installed cost of similar GSHP systems in the future. Publication of ASHRAE at the annual conference in Seattle June 2014.

  11. Flathead Electric Cooperative Facility Geothermal Heat Pump System Upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Xiaobing [Oak Ridge National Lab

    2014-06-01

    High initial cost and lack of public awareness of ground source heat pump (GSHP) technology are the two major barriers preventing rapid deployment of this energy saving technology in the United States. Under the American Recovery and Reinvestment Act (ARRA), 26 GSHP projects have been competitively selected and carried out to demonstrate the benefits of GSHP systems and innovative technologies for cost reduction and/or performance improvement. This paper highlights findings of a case study of one of the ARRA-funded GSHP demonstration projects, which is a heating only central GSHP system using shallow aquifer as heat source and installed at a warehouse and truck bay at Kalispell, MT. This case study is based on the analysis of measured performance data, utility bills, and calculations of energy consumptions of conventional central heating systems for providing the same heat outputs as the central GSHP system did. The evaluated performance metrics include energy efficiency of the heat pump equipment and the overall GSHP system, pumping performance, energy savings, carbon emission reductions, and cost-effectiveness of GSHP system compared with conventional heating systems. This case study also identified areas for reducing uncertainties in performance evaluation, improving operational efficiency, and reducing installed cost of similar GSHP systems in the future. Publication of ASHRAE at the annual conference in Seattle.

  12. Heat pump processes induced by laser radiation

    Science.gov (United States)

    Garbuny, M.; Henningsen, T.

    1980-01-01

    A carbon dioxide laser system was constructed for the demonstration of heat pump processes induced by laser radiation. The system consisted of a frequency doubling stage, a gas reaction cell with its vacuum and high purity gas supply system, and provisions to measure the temperature changes by pressure, or alternatively, by density changes. The theoretical considerations for the choice of designs and components are dicussed.

  13. Laser-diode pumped Nd:YAG lasers; Laser diode reiki Nd:YAG lasear

    Energy Technology Data Exchange (ETDEWEB)

    Yuasa, H.; Akiyama, Y.; Nakayama, M. [Toshiba Corp., Tokyo (Japan)

    2000-04-01

    Laser-diode pumped Nd:YAG lasers are expected to be applied to laser processing fields such as welding, cutting, drilling, and marking due to their potential for high efficiency and compactness. We are designing and developing laser-diode pumped Nd:YAG lasers using numerical analysis simulation techniques such as ray tracing and thermal analysis. We have succeeded in achieving a laser power of more than 3 kW with 20% efficiency, which is the best ever obtained. In addition, we have developed a laser-diode pumped green laser by second harmonic generation, for precision machining on silicon wafers. (author)

  14. Free-running emerald laser pumped by laser diode

    Institute of Scientific and Technical Information of China (English)

    Zhenqiang Chen; Ge Zhang

    2006-01-01

    Free-running emerald laser pumped by 660-nm laser diode (LD) was reported. Free-running output powerof 24 mW has been obtained with overall efficiency of 1.4% and slope efficiency of 11.9% when the LD incident power was 2.56 W. The laser threshold value of emerald crystal was estimated to be 0.7 W.

  15. Ho:YLF Laser Pumped by TM:Fiber Laser

    Directory of Open Access Journals (Sweden)

    Mizutani Kohei

    2016-01-01

    Full Text Available A 2-micron Ho:YLF laser end-pumped by 1.94-micron Tm:fiber laser is described. A ring resonator of 3m length is adopted for the oscillator. The laser is a master oscillator and an amplifier system. It is operated at high repetition rate of 200-5000 Hz in room temperature. The laser outputs were about 9W in CW and more than 6W in Q-switched operation. This laser was developed to be used for wind and CO2 measurements.

  16. Modelling end-pumped solid state lasers

    NARCIS (Netherlands)

    Bernhardi, E.H.; Bollig, C.; Forbes, A.; Esser, M.J.D.; Wörhoff, K.; Agazzi, L.; Ismail, N.; Leijtens, X.

    2008-01-01

    The operation dynamics of end-pumped solid-state lasers are investigated by means of a spatially resolved numerical rate-equation model and a time-dependent analytical thermal model. The rate-equation model allows the optimization of parameters such as the output coupler transmission and gain medium

  17. Upgrade of the ESO Laser Guide Star Facility

    Science.gov (United States)

    Lewis, Steffan; Bonaccini Calia, Domenico; Buzzoni, Bernard; Duhoux, Philippe; Fischer, Gert; Guidolin, Ivan; Hintershuster, Renate; Holzloehner, Ronald; Jolley, Paul; Pfrommer, Thomas; Popovic, Dan; Alvarez, Alvaro; Beltran, Juan; Girard, Julien; Gonte, Frederic

    2013-12-01

    The laser guide star facility (LGSF) is part of the fourth Unit Telescope, Yepun, at Paranal observatory. It provides a single centre-launched sodium beacon for the two adaptive optics instruments SINFONI and NACO located at Cassegrain and Nasmyth B respectively. The original facility, which was installed in 2006, comprised a high-power sodium-resonant dye laser source, PARSEC, producing an output beam that was delivered via a 27 metre long single-mode photonic crystal optical fibre to a launch system located behind the telescope secondary mirror. This dye laser was recently replaced with a laser system based on solid-state Raman fibre laser technology known as PARLA. Apart from the laser source, the design of the rest of the LGSF remained essentially unchanged during the upgrade. Requirements for the new laser system include start-up times consistent with the flexible observing strategy of the Paranal telescopes, and an output beam format compatible with the existing fibre-delivered launch system. Reported here are the main results of the design, integration and commissioning of the new laser system. Service mode observing using the LGSF restarted on February 20th 2013.

  18. Project W-314 specific test and evaluation plan for 241-AY-01A pump pit upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Hays, W.H.

    1998-05-19

    This Specific Test and Evaluation Plan (STEP) defines the test and evaluation activities encompassing the upgrade of the 241-AY-0IA Pump Pit for the W-314 Project. The purpose of this Specific Test and Evaluation Plan (STEP) is to provide a detailed written plan for the systematic testing of modifications made to the 241-AY-01A Pump Pit by the W-314 Project. The STEP develops the outline for test procedures that verify the system`s performance to the established Project design criteria. The STEP is a lower tier document based on the W-314 Test and Evaluation Plan (TEP).

  19. Project W-314 specific test and evaluation plan for 241-AY-02A pump pit upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Hays, W.H.

    1998-05-19

    This Specific Test and Evaluation Plan (STEP) defines the test and evaluation activities encompassing the upgrade of the 241-AY-02A Pump Pit for the W-314 Project. The purpose of this Specific Test and Evaluation Plan (STEP) is to provide a detailed written plan for the systematic testing of modifications made to the 241-AY-02A Pump Pit by the W-314 Project. The STEP develops the outline for test procedures that verify the system`s performance to the established Project design criteria. The STEP is a lower tier document based on the W-314 Test and Evaluation Plan (TEP).

  20. High power diode lasers for solid-state laser pumps

    Science.gov (United States)

    Linden, Kurt J.; McDonnell, Patrick N.

    1994-02-01

    The development and commercial application of high power diode laser arrays for use as solid-state laser pumps is described. Such solid-state laser pumps are significantly more efficient and reliable than conventional flash-lamps. This paper describes the design and fabrication of diode lasers emitting in the 780 - 900 nm spectral region, and discusses their performance and reliability. Typical measured performance parameters include electrical-to-optical power conversion efficiencies of 50 percent, narrow-band spectral emission of 2 to 3 nm FWHM, pulsed output power levels of 50 watts/bar with reliability values of over 2 billion shots to date (tests to be terminated after 10 billion shots), and reliable operation to pulse lengths of 1 ms. Pulse lengths up to 5 ms have been demonstrated at derated power levels, and CW performance at various power levels has been evaluated in a 'bar-in-groove' laser package. These high-power 1-cm stacked-bar arrays are now being manufactured for OEM use. Individual diode laser bars, ready for package-mounting by OEM customers, are being sold as commodity items. Commercial and medical applications of these laser arrays include solid-state laser pumping for metal-working, cutting, industrial measurement and control, ranging, wind-shear/atmospheric turbulence detection, X-ray generation, materials surface cleaning, microsurgery, ophthalmology, dermatology, and dental procedures.

  1. Micron Size Laser-Wire System at the ATF Extraction Line, Recent Results and ATF-II Upgrade

    CERN Document Server

    Blair, G A; Boorman, G; Bosco, A; Deacon, L; Karataev, P; Howell, D; Nevay, L J; Corner, L; Delerue, N; Foster, B; Gannaway, F; Newman, M; Senanayake, R; Walczak, R; Hayano, H; Aryshev, A; Terunuma, N; Urakawa, J

    2010-01-01

    The KEK Accelerator test facility (ATF) extraction line laser-wire system has been upgraded last year allowing the measurement of micron scale transverse size electron beams. The most recent measurements using the upgraded system are presented. The ATF-II extraction line design call for the major upgrade of the existing laser-wire system. We report on the hardware upgrades, including the major hardware upgrades to the laser transport, the laser beam diagnostics line, and the mechanical control systems.

  2. UPGRADES

    CERN Multimedia

    J. Spalding and D. Contardo

    2012-01-01

      The CMS Upgrade Programme consists of four classes of projects: (a) Detector and Systems upgrades which are ongoing and largely (though not entirely) target LS1. (b) Full system upgrades for three projects that are preparing TDRs: Pixels, HCAL and L1 Trigger. The projects target completion by LS2. (c) Infrastructure consolidation and upgrades to improve operational robustness and to support the above projects. (d) Phase 2 replacement of the Tracker and major upgrades of the Trigger and Forward Detectors. For (a) and (c), detailed costing exists and is being integrated into a common reporting system. The schedule milestones for each project will be linked into the overall schedule planning for LS1. For the three TDR projects, the designs have progressed significantly since the Technical Proposal in 2010. Updated detailed cost estimates and schedules will be prepared with the TDRs to form the basis for tracking the projects through completion. To plan the upgrades and the supporting simulati...

  3. Numerical simulation for nuclear pumped laser

    Energy Technology Data Exchange (ETDEWEB)

    Sakasai, Kaoru [Japan Atomic Energy Research Inst., Tokyo (Japan)

    1998-07-01

    To apply nuclear pumped laser of {sup 3}He-Ne-Ar gas to detect neutron, the optimum gas mixture was investigated by numerical simulation. When {sup 3}He-Ne-Ar mixture gas are irradiated by neutron, proton and triton with high velocity are produced by {sup 3}He(np)T and two charge particles ionized {sup 3}He, Ne and Ar which reacted each other and attained to 3p`(1/2){sub 0}-3S`(1/2). The calculation method is constructed by defining the rate equations of each ion and exited atom and the electron energy balance equation and by time integrating the simultaneous differential equations of the above two equations and the law of conservation of charge. Penning ionization and energy transport by elastic collision of neutral atom were considered in the transport process of electron energy direct ionization by secondary charge particle. Calculation time was 1 msec. The optimum component was shown 3 atm He, 24 Torr He and 8 Torr Ar by simulation. Laser oscilation was generated under the conditions 3.3 x 10{sup 14} (N/cm{sup 2}/5) thermal neutron flux at 50 cm laser cell length and 99% coefficient of reflection of mirror. After laser oscilation, laser output was proportional to neutron flux. These results showed nuclear pumped laser of {sup 3}He-Ne-Ar was able to detect optically neutron. (S.Y)

  4. Diode pumped solid-state laser oscillators for spectroscopic applications

    Science.gov (United States)

    Byer, R. L.; Basu, S.; Fan, T. Y.; Kozlovsky, W. J.; Nabors, C. D.; Nilsson, A.; Huber, G.

    1987-01-01

    The rapid improvement in diode laser pump sources has led to the recent progress in diode laser pumped solid state lasers. To date, electrical efficiencies of greater than 10 percent were demonstrated. As diode laser costs decrease with increased production volume, diode laser and diode laser array pumped solid state lasers will replace the traditional flashlamp pumped Nd:YAG laser sources. The use of laser diode array pumping of slab geometry lasers will allow efficient, high peak and average power solid state laser sources to be developed. Perhaps the greatest impact of diode laser pumped solid state lasers will be in spectroscopic applications of miniature, monolithic devices. Single-stripe diode-pumped operation of a continuous-wave 946 nm Nd:YAG laser with less than 10 m/w threshold was demonstrated. A slope efficiency of 16 percent near threshold was shown with a projected slope efficiency well above a threshold of 34 percent based on results under Rhodamine 6G dye-laser pumping. Nonlinear crystals for second-harmonic generation of this source were evaluated. The KNbO3 and periodically poled LiNbO3 appear to be the most promising.

  5. Solar-pumped gas laser development

    Science.gov (United States)

    Wilson, J. W.

    1980-01-01

    A survey of gas properties through detailed kinetic models led to the identification of critical gas parameters for use in choosing appropriate gas combinations for solar pumped lasers. Broadband photoabsorption in the visible or near UV range is required to excite large volumes of gas and to insure good solar absorption efficiency. The photoexcitation density is independent of the absorption bandwidth. The state excited must be a metastable state which is not quenched by the parent gas. The emission bandwidth must be less than 10 A to insure lasing threshold over reasonable gain lengths. The system should show a high degree of chemical reversibility and an insensitivity to increasing temperature. Other properties such as good quantum efficiency and kinetic efficiency are also implied. Although photoexcitation of electronic vibrational transitions is considered as a possible system if the emission bands sufficiently narrow, it appears that photodissociation into atomic metastables is more likely to result in a successful solar pumped laser system.

  6. New Class of Excimer-Pumped Atomic Lasers (XPALS)

    Science.gov (United States)

    2017-01-24

    appears to be scnlable in power but, more importBntly, the loser gain medium is cooled by the emission orevery laser photon. The smallest energy derect...during high power pumping has been performed. 15.SUBJECT TERMS alkali lasers , optical pumping, laser medium cooling 16. SECURITY CLASSIFICATION OF...critical to the cooling of the laser medium by pumping it through the lower lying states. Results obtained during this program were described in detail

  7. Semiconductor Laser Diode Pumps for Inertial Fusion Energy Lasers

    Energy Technology Data Exchange (ETDEWEB)

    Deri, R J

    2011-01-03

    Solid-state lasers have been demonstrated as attractive drivers for inertial confinement fusion on the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL) and at the Omega Facility at the Laboratory for Laser Energetics (LLE) in Rochester, NY. For power plant applications, these lasers must be pumped by semiconductor diode lasers to achieve the required laser system efficiency, repetition rate, and lifetime. Inertial fusion energy (IFE) power plants will require approximately 40-to-80 GW of peak pump power, and must operate efficiently and with high system availability for decades. These considerations lead to requirements on the efficiency, price, and production capacity of the semiconductor pump sources. This document provides a brief summary of these requirements, and how they can be met by a natural evolution of the current semiconductor laser industry. The detailed technical requirements described in this document flow down from a laser ampl9ifier design described elsewhere. In brief, laser amplifiers comprising multiple Nd:glass gain slabs are face-pumped by two planar diode arrays, each delivering 30 to 40 MW of peak power at 872 nm during a {approx} 200 {micro}s quasi-CW (QCW) pulse with a repetition rate in the range of 10 to 20 Hz. The baseline design of the diode array employs a 2D mosaic of submodules to facilitate manufacturing. As a baseline, they envision that each submodule is an array of vertically stacked, 1 cm wide, edge-emitting diode bars, an industry standard form factor. These stacks are mounted on a common backplane providing cooling and current drive. Stacks are conductively cooled to the backplane, to minimize both diode package cost and the number of fluid interconnects for improved reliability. While the baseline assessment in this document is based on edge-emitting devices, the amplifier design does not preclude future use of surface emitting diodes, which may offer appreciable future cost reductions and

  8. Applications for reactor-pumped lasers

    Science.gov (United States)

    Lipinski, R. J.; McArthur, D. A.

    Nuclear reactor-pumped lasers (RPL's) have been developed in the US by the Department of Energy for over two decades, with the primary research occurring at Sandia National Laboratories and Idaho National Engineering Laboratory. The US program has experimentally demonstrated reactor-pumped lasing in various mixtures of xenon, argon, neon, and helium at wavelengths of 585, 703, 725, 1,271, 1,733, 1,792, 2,032, 2,630, 2,650, and 3,370 nm with intrinsic efficiency as high as 2.5%. The major strengths of a reactor-pumped laser are continuous high-power operation, modular construction, self-contained power, compact size, and a variety of wavelengths (from visible to infrared). These characteristics suggest numerous applications not easily accessible to other laser types. The continuous high power of an RPL opens many potential manufacturing applications such as deep-penetration welding and cutting of thick structures, wide-area hardening of metal surfaces by heat treatment or cladding application, wide-area vapor deposition of ceramics onto metal surfaces, production of sub-micron sized particles for manufacturing of ceramics, and 3-D ceramic lithography. In addition, a ground-based RPL could beam its power to space for such activities as illuminating geosynchronous communication satellites in the earth's shadow to extend their lives, beaming power to orbital transfer vehicles, removing space debris, and providing power (from earth) to a lunar base during the long lunar night.

  9. Grating THz laser with optical pumping

    Science.gov (United States)

    Khoury, Jed; Haji-saeed, Bahareh; Woods, Charles; Kierstead, John

    2010-04-01

    In this paper, we present a design for a widely tunable solid-state optically and electrically pumped THz laser based on the Smith-Purcell free-electron laser. In the free-electron laser, an energetic electron beam pumps a metallic grating to generate surface plasmons. Our solid-state optically pumped design consists of a thin layer of dielectic, such as SiNx, sandwiched between a corrugated structure and a thin metal or semiconductor layer. The lower layer is for current streaming, and replaces the electron beam in the original design. The upper layer consists of one micro-grating for coupling the electromagnetic field in, another for coupling out, and a nano-grating for coupling with the current in the lower layer for electromagnetic field generation. The surface plasmon waves generated from the upper layer by an external electromagnetic field, and the lower layer by the applied current, are coupled. Emission enhancement occurs when the plasmonic waves in both layers are resonantly coupled.

  10. UPGRADES

    CERN Multimedia

    J. Butler and J. Nash

    2011-01-01

    Recent progress on the CMS upgrades was summarised, in a workshop held at Fermilab between 7th and 10th November, attended by more than 150 people, many of whom came from Europe and Asia. Important goals of the workshop were to begin to formulate a schedule for the upgrades and to determine project interdependencies. Input was received from all the upgrade working groups and will be combined into a first-pass schedule over the next several weeks. In addition, technical progress on each of the major subtasks was presented and plans for the near-term future were established. Slides from the more than 100 talks are located at: https://indico.cern.ch/conferenceDisplay.py?confId=153564 In the opening plenary session, Frank Zimmermann, of the CERN Beams Department, gave his view of the LHC luminosity evolution. The luminosity will increase faster than we assumed in designing the upgrades. CMS will need to re-evaluate the current upgrade plans and revise them if necessary. CMS Upgrade Physics coordinator...

  11. Highly-efficient high-power pumps for fiber lasers

    Science.gov (United States)

    Gapontsev, V.; Moshegov, N.; Berezin, I.; Komissarov, A.; Trubenko, P.; Miftakhutdinov, D.; Berishev, I.; Chuyanov, V.; Raisky, O.; Ovtchinnikov, A.

    2017-02-01

    We report on high efficiency multimode pumps that enable ultra-high efficiency high power ECO Fiber Lasers. We discuss chip and packaged pump design and performance. Peak out-of-fiber power efficiency of ECO Fiber Laser pumps was reported to be as high as 68% and was achieved with passive cooling. For applications that do not require Fiber Lasers with ultimate power efficiency, we have developed passively cooled pumps with out-of-fiber power efficiency greater than 50%, maintained at operating current up to 22A. We report on approaches to diode chip and packaged pump design that possess such performance.

  12. Solar-pumped gas laser development

    Science.gov (United States)

    Wilson, J. W.

    1981-01-01

    The direct conversion of solar radiation into an inverted population for extraction in an optical cavity holds promise as a relatively simple system design. Broad-band photoabsorption in the visible or near-UV range is required to excite large volumes of gas and to ensure good solar absorption efficiency. The state excited must be a metastable state which is not quenched by the parent gas. The emission bandwidth must be less than approximately 10 A. The system should show chemical reversibility and an insensitivity to increasing temperature. Other properties such as good quantum efficiency and kinetic efficiency are also implied. A search of electronic-vibrational transitions in diatomic molecules satisfying these conditions is now in progress. A photodissociation-pumped atomic iodine laser is now being tested under solar pumping conditions. Photodissociation studies for thallium spin-flip metastable formation will begin in the near future.

  13. Unidirectionality of an optically pumped far infrared ring laser

    Science.gov (United States)

    Matsushima, Kyoji; Higashida, Noriyoshi; Sokabe, Noburu; Ariyasu, Tomio

    1995-02-01

    An experimental and theoretical investigation has been made on the unidirectional operation of an optically pumped far infrared ring laser. A ring laser operating on the 119 μm line of CH 3OH experiences reversal of output direction in either case of (a) the pump frequency being tuned across the line center of the infrared pump transition or (b) the fir cavity being tuned across the far infrared line center. A model based on two-mode laser theory predicts the output directionality of the optically pumped fir ring laser.

  14. DOE reactor-pumped laser program

    Energy Technology Data Exchange (ETDEWEB)

    Felty, J.R. [USDOE, Germantown, MD (United States). Defense Programs; Lipinski, R.J.; McArthur, D.A.; Pickard, P.S. [Sandia National Labs., Albuquerque, NM (United States)

    1993-12-31

    FALCON is a high-power, steady-state, nuclear reactor-pumped laser (RPL) concept that is being developed by the Department of Energy. The FALCON program has experimentally demonstrated reactor-pumped lasing in various mixtures of xenon, argon, neon, and helium at at wavelengths of 585, 703, 725, 1271, 1733, 1792, 2032, 2630, 2650, and 3370 nm with intrinsic efficiency as high as 2.5%. The major strengths of a reactor-pumped laser are continuous high-power operation, modular construction, self-contained power, compact size, and a variety of wavelengths (from visible to infrared). These characteristics suggest numerous applications not easily accessible to other laser types. A ground-based RPL could beam its power to space for such activities as illuminating geosynchronous communication satellites in the earth`s shadow to extend their lives, beaming power to orbital transfer vehicles, removing space debris, and providing power (from earth) to a lunar base during the long lunar night. The compact size and self-contained power also makes an RPL very suitable for ship basing so that power-beaming activities could be situated around the globe. The continuous high power of an RPL opens many potential manufacturing applications such as deep-penetration welding and cutting of thick structures, wide-area hardening of metal surfaces by heat treatment or cladding application, wide-area vapor deposition of ceramics onto metal surfaces, production of sub-micron sized particles for manufacturing of ceramics, wide-area deposition of diamond-like coatings, and 3-D ceramic lithography.

  15. DOE reactor-pumped laser program

    Science.gov (United States)

    Felty, James R.; Lipinski, Ronald J.; McArthur, David A.; Pickard, Paul S.

    1994-05-01

    FALCON is a high-power, steady-state, nuclear reactor-pumped laser (RPL) concept that is being developed by the Department of Energy. The FALCON program has experimentally demonstrated reactor-pumped lasing in various mixtures of xenon, argon, neon, and helium at wavelengths of 585, 703, 725, 1271, 1733, 1792, 2032, 2630, 2650, and 3370 nm with intrinsic efficiency as high as 2.5%. The major strengths of a reactor-pumped laser are continuous high-power operation, modular construction, self-contained power, compact size, and a variety of wavelengths (from visible to infrared). These characteristics suggest numerous applications not easily accessible to other laser types. A ground-based RPL could beam its power to space for such activities as illuminating geosynchronous communication satellites in the earth's shadow to extend their lives, beaming power to orbital transfer vehicles, removing space debris, and providing power (from earth) to a lunar base during the long lunar night. The compact size and self-contained power also makes an RPL very suitable for ship basing so that power-beaming activities could be situated around the globe. The continuous high power of an RPL opens many potential manufacturing applications such as deep-penetration welding and cutting of thick structures, wide-area hardening of metal surfaces by heat treatment or cladding application, wide-area vapor deposition of ceramics onto metal surfaces, production of sub-micron sized particles for manufacturing of ceramics, wide-area deposition of diamond- like coatings, and 3-D ceramic lithography.

  16. Fiber-laser-pumped Ti:sapphire laser

    CERN Document Server

    Samanta, G K; Devi, Kavita; Ebrahim-Zadeh, M

    2010-01-01

    We report the first experimental demonstration of efficient and high-power operation of a Ti:sapphire laser pumped by a simple, compact, continuous-wave (cw) fiber-laser-based green source. The pump radiation is obtained by direct single-pass second-harmonic-generation (SHG) of a 33-W, cw Yb-fiber laser in 30-mm-long MgO:sPPLT crystal, providing 11 W of single-frequency green power at 532 nm in TEM00 spatial profile with power and frequency stability better than 3.3% and 32 MHz, respectively, over one hour. The Ti:sapphire laser is continuously tunable across 743-970 nm and can deliver an output power up to 2.7 W with a slope efficiency as high as 32.8% under optimum output coupling of 20%. The laser output has a TEM00 spatial profile with M2<1.44 across the tuning range and exhibits a peak-to-peak power fluctuation below 5.1% over 1 hour.

  17. UPGRADES

    CERN Multimedia

    D. Contardo and J. Spalding

    2013-01-01

    There is very good progress in the execution of the LS1 projects and in launching construction of the Phase 1 upgrades. We focus here on two main achievements since the last CMS Week. The approval of the third Phase 1 TDR The preparation of the L1 Trigger Upgrade Technical Design Report has been a major effort of the collaboration at the beginning of this year, especially to develop supporting Trigger menu and physics performance studies. These studies have demonstrated the efficiency of the upgraded system to ensure low lepton and jet trigger thresholds, leading to a significant increase of the acceptance for the Higgs measurements, in the associated production mode and in the ττ decays, as well as for the stop searches involving multiple jets in the final state. The TDR was submitted to the LHCC in May and approved at the June committee meeting. It is now a public document, completing the series of the three TDRs describing the Phase 1 upgrades, with the new Pixel system and the HCAL rea...

  18. Nuclear pumped laser research at the Jet Propulsion Laboratory

    Science.gov (United States)

    Russell, G. R.

    1979-01-01

    Using a partially nuclear excited xenon flashlamp to pump an iodine laser, laser pulse shapes were analyzed with and without nuclear flashlamp augmentation. The pulse shapes indicate that the deposition of nuclear energy is equally as effective as electrical energy deposition in producing laser pulse energy output. The amplification of the E-beam pumped CF3I was measured at pressures of several atmospheres. Preliminary data shows that, for a part of the iodine laser pulse, amplification of almost a factor of two is measured. This measurement indicates that the gain in an E-beam pumped CF3I is an order of magnitude greater than in the coaxial laser tube.

  19. "Diode Pumped Solid State Lasers At 2 And 3 µm"

    Science.gov (United States)

    Esterowitz, Leon

    1988-06-01

    The most attractive alternative to flashlamp pumping of solid state lasers is the diode laser. In the past two decades numerous laboratory devices have been assembled which incorporated single diode lasers, small laser diode arrays or LED's for pumping of Nd:YAG, Nd:glass and a host of other Nd lasers. The low power output, low packaging density, and extremely high cost of diode lasers prevented any serious applications for laser pumping in the past. The reason for the continued interest in this area stems from the potential dramatic increase in system efficiency and component lifetime, and reduction of thermal load of the solid-state laser material. The latter not only will reduce thereto-optic effects and therefore lead to better beam quality but also will enable an increase in pulse repetition frequency. The attractive operating parameters combined with low voltage operation and the compactness of an all solid-state laser system have a potential high payoff. The high pumping efficiency compared to flashlamps stems from the good spectral match between the laser diode emission and the rare earth activator absorption bands. A significant advantage of laser diode pumping compared to arc lamps is system lifetime and reliability. Laser diode arrays have exhibited lifetimes on the order of 10,000 hours in cw operation and 109 shots in the pulsed mode. Flashlamp life is on the order of 107 shots, and about 200 hours for cw operation. In addition, the high pump flux combined with a substantial UV content in lamp pumped systems causes material degradation in the pump cavity and in the coolant. Such problems are virtually eliminated with laser diode pump sources. The absence of high voltage pulses, high temperatures and UV radiation encountered with arc lamps leads to much more benign operating features for solid state laser systems employing laser diode pumps. Laser diode technology dates back to 1962 when laser action in GaAs diodes was first demonstrated. However, it

  20. High-power optically pumped semiconductor laser apllications

    Science.gov (United States)

    Morioka, S. Brandon

    2011-03-01

    OPS lasers have found applications in various industrial and scientific laser applications due to their power scaling capability, their wide range of emission wavelengths, physical size and their superior reliability. This paper provides an overview of commercially available OPS lasers and the applications in which they are used including biotechnology, medical, holography, Titanium-Sapphire laser pumping, non-lethal defense, forensics, and entertainment.

  1. Threshold ratios for molecular lasers with optical pumping

    Energy Technology Data Exchange (ETDEWEB)

    Kuntsevich, B.F.; Churakou, U.V.

    1976-01-01

    A series of relationships was obtained for threshold characteristics of high pressure molecular lasers with optical pumping. The threshold pumping density increases in proportion to the square of the active medium's pressure. The minimum value of threshold pumping corresponds to the maximum of the Boltzmann distribution function for rotating sublevels both in the pumping channel and in generation. A weak or strong relationship was observed between the threshold impulse energy and the pressure that is caused by fluctuative relaxation of the upper laser level for various relationships between the intensity of the pumping impulse, pressure and loss coefficient.

  2. Vanadium-pumped titanium x-ray laser

    Energy Technology Data Exchange (ETDEWEB)

    Nilsen, J.

    1991-02-13

    A resonantly photo-pumped x-ray laser is formed of a vanadium and titanium foil combination that is driven by two beams of intense line focused optical laser radiation. Ground state neon-like titanium ions are resonantly photo-pumped by line emission from fluorine-like vanadium ions.

  3. Development of diode-pumped medical solid-state lasers

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Cheol Jung; Kim, Min Suk

    2000-09-01

    Two thirds of human body consists of water and the absorption of laser by water is an important factor in medical laser treatment. Er medical lasers have been used in the dermatology, ophthalmology and dental treatments due to its highest absorption by water. However, 2.9 um Er laser can not be transmitted through an optical fiber. On the other hand, Tm laser can be transmitted through an fiber and also has very high absorption by water. Therefore, Tm lasers are used in ophthalmology and heart treatment wherein the fiber delivery is very important for the treatment. Until now, mainly lamp-pumped solid-state lasers have been used in medical treatments, but the lamp-pumped solid-state lasers are being replaced with the diode-pumped solid-state lasers because the diode-pumped solid-state lasers are more compact and much easier to maintain. Following this trend, end-pumped Er and side-pumped Tm lasers have been developed and the output power of 1 W was obtained for Er and Tm respectively.

  4. 550-W diode-pumped Nd:YAG disk laser

    Institute of Scientific and Technical Information of China (English)

    Zhenyu Yao; Jianfeng Jiang; Bo Tu; Tangjian Zhou; Lingling Cui

    2005-01-01

    When a thin laser crystal disk is used with a nearly flat-top pump profile, the heat flux can be considered to be one-dimensional. This results in a homogeneous temperature and stress profile within the laser medium leading to reduction of thermal effects. A nearly flat-top pump profile is achieved with a two-pass cylindrical-lens coupling system. An average output power of 550 W is obtained by an average pumping

  5. ATF CO{sub 2} laser system upgrade to terawatt peak power

    Energy Technology Data Exchange (ETDEWEB)

    Pogorelsky, I.V.

    1995-05-01

    This document describes the proposed upgrade of the 10-GW peak power 50-ps CO{sub 2} laser presently operational at the ATF to the 1 TW level at a shorter, 3--10 ps, pulse duration. The approach adopted is based on state of the art CO{sub 2} laser technology and an experience gained in the course of the ATF laser design and application for the laser accelerator experiment. The proposed upgrade is an economical way for the ATF to become in a short time among leading users facilities available for next generation ({ge} 100 MeV) laser accelerator studies.

  6. ATF CO{sub 2} laser system upgrade to terawatt peak power

    Energy Technology Data Exchange (ETDEWEB)

    Pogorelsky, I.V.

    1995-05-01

    This document describes the proposed upgrade of the 10-GW peak power 50-ps CO{sub 2} laser presently operational at the ATF to the 1 TW level at a shorter, 3--10 ps, pulse duration. The approach adopted is based on state of the art CO{sub 2} laser technology and an experience gained in the course of the ATF laser design and application for the laser accelerator experiment. The proposed upgrade is an economical way for the ATF to become in a short time among leading users facilities available for next generation ({ge} 100 MeV) laser accelerator studies.

  7. Superfluorescent emission in electrically pumped semiconductor laser

    CERN Document Server

    Boiko, D L; Stadelmann, T; Grossmann, S; Hoogerwerf, A; Weig, T; Schwarz, U T; Sulmoni, L; Lamy, J -M; Grandjean, N

    2013-01-01

    We report superfluorescent (SF) emission in electrically pumped InGaN/InGaN QW lasers with saturable absorber. In particular, we observe a superlinear growth of the peak power of SF pulses with increasing amplitude of injected current pulses and attribute it to cooperative pairing of electron-hole (e-h) radiative recombinations. The phase transitions from amplified spontaneous emission to superfluorescence and then to lasing regime is confirmed by observing (i) superlinear peak power growth, (ii) spectral shape with hyperbolic secant envelope and (iii) red shift of central wavelength of SF emission pulse. The observed red shift of SF emission is shown to be caused by the pairing of e-h pairs in an indirect cooperative X-transition.

  8. Diode-pumped 1123-nm Nd:YAG laser

    Institute of Scientific and Technical Information of China (English)

    Xiaoping Guo(郭晓萍); Meng Chen(陈檬); Gang Li(李港); Bingyuan zhang(张炳元); Jiandong Yang(杨建东); Zhigang Zhang(张志刚); Yonggang Wang(王勇刚)

    2004-01-01

    We demonstrated a diode-pumped Nd:YAG laser with a plano-concave resonator. When the pump power is 1.57 W, the output power of 1123-nm laser is 132 mW at the temperature of 20 ℃, and the power change is less than 2% in an hour. A periodically poled LiNbOa (PPLN) was used as outer cavity frequency-doubling crystal and 561-nm laser was observed.

  9. UPGRADES

    CERN Multimedia

    D. Contardo and J. Spalding

    2013-01-01

    The three post-LS1 Phase 1 Upgrade projects (the L1-Trigger, Pixel Tracker, and HCAL) are all making excellent progress and are transitioning from the prototype to the execution phase. Meanwhile plans are developing for Phase 2, a major Upgrade programme targeting the third long shutdown, LS3. News on Phase 1 is included under the respective projects; we only provide a brief summary here. Phase 1 The plan for the L1 Trigger relies on the installation during the present shutdown of optical splitting for the Trigger input signals. This will allow the new Trigger system to be brought online and fully commissioned during beam operation in 2015, while CMS relies on the existing legacy Trigger for physics. Once fully commissioned the experiment can switch over to the new Trigger, which will provide greatly improved performance at high event pile-up, by 2016. System tests of the splitter system, and of the new architecture of the calorimeter trigger were very successful, and the work in LS1 is on-track. Prototype ...

  10. UPGRADES

    CERN Multimedia

    D. Contardo and J. Spalding

    2012-01-01

      Good progress is being made on the projects that will be installed during LS1. CSC chamber production for ME4/2 is progressing at a rate of four chambers per month, with 25 built so far, and the new electronics for ME1/1 is undergoing a pre-production integration testing. For the RPC chambers, gap production is underway with first deliveries to the chamber assembly sites at CERN and Ghent. The third site at Mumbai will begin production next month. For the PMT replacement in the forward hadron calorimeters (HF), the 1728 PMTs are all characterised and ready to be installed. Testing of the electronics boards is going well. Preparations to replace the HPDs in the outer calorimeter (HO) with SiPMs are also on-track. All components are at CERN and burn-in of the new front-end electronics is proceeding. There are three major upgrade projects targeting the period from LS1 through LS2: a new pixel detector, upgraded photo-detectors and electronics for HCAL, and development of a new L1 Trigger. The new ...

  11. UPGRADES

    CERN Multimedia

    Didier Contardo

    2012-01-01

      The CMS Upgrade Programme is making good progress on the LS1 and Phase 1 projects, in the planning for Phase 2. The construction of the ME4/2 muon chambers to be installed during LS1 has started and the two first CSC production chambers have been fully qualified. The three muon groups have recently established a set of milestones towards the completion of their project, that will be integrated in the detailed planning and scheduling for the shutdown work established by Technical Coordination. The project to replace the photo-detectors in the HF and HO calorimeters is also well advanced and at the validation stage. The operation of an HF slice with new multi-anode PMTs and back-end electronics has already been demonstrated in 2012. For the Phase 1 data-taking, as discussed in the Chamonix workshop, it is likely that the LHC performance will exceed the nominal luminosity and pile-up before the second shutdown, still scheduled in 2018. The collaboration is therefore pursuing a strategy to upgrade ...

  12. Nuclear-Pumped Lasers. [efficient conversion of energy liberated in nuclear reactions to coherent radiation

    Science.gov (United States)

    1979-01-01

    The state of the art in nuclear pumped lasers is reviewed. Nuclear pumped laser modeling, nuclear volume and foil excitation of laser plasmas, proton beam simulations, nuclear flashlamp excitation, and reactor laser systems studies are covered.

  13. High brightness diode-pumped organic solid-state laser

    CERN Document Server

    Zhao, Zhuang; Nafa, Malik; Chénais, Sébastien; Forget, Sébastien

    2015-01-01

    High-power, diffraction-limited organic solid-state laser operation has been achieved in a vertical external cavity surface-emitting organic laser (VECSOL), pumped by a low-cost compact blue laser diode. The diode-pumped VECSOLs were demonstrated with various dyes in a polymer matrix, leading to laser emissions from 540 nm to 660 nm. Optimization of both the pump pulse duration and output coupling leads to a pump slope efficiency of 11% for a DCM based VECSOLs. We report output pulse energy up to 280 nJ with 100 ns long pump pulses, leading to a peak power of 3.5 W in a circularly symmetric, diffraction-limited beam.

  14. High brightness diode-pumped organic solid-state laser

    Science.gov (United States)

    Zhao, Zhuang; Mhibik, Oussama; Nafa, Malik; Chénais, Sébastien; Forget, Sébastien

    2015-02-01

    High-power, diffraction-limited organic solid-state laser operation has been achieved in a vertical external cavity surface-emitting organic laser (VECSOL), pumped by a low-cost compact blue laser diode. The diode-pumped VECSOLs were demonstrated with various dyes in a polymer matrix, leading to laser emissions from 540 nm to 660 nm. Optimization of both the pump pulse duration and output coupling leads to a pump slope efficiency of 11% for a DCM based VECSOLs. We report output pulse energy up to 280 nJ with 100 ns long pump pulses, leading to a peak power of 3.5 W in a circularly symmetric, diffraction-limited beam.

  15. Upgrading NASA/DOSE laser ranging system control computers

    Science.gov (United States)

    Ricklefs, Randall L.; Cheek, Jack; Seery, Paul J.; Emenheiser, Kenneth S.; Hanrahan, William P., III; Mcgarry, Jan F.

    1993-01-01

    Laser ranging systems now managed by the NASA Dynamics of the Solid Earth (DOSE) and operated by the Bendix Field Engineering Corporation, the University of Hawaii, and the University of Texas have produced a wealth on interdisciplinary scientific data over the last three decades. Despite upgrades to the most of the ranging station subsystems, the control computers remain a mix of 1970's vintage minicomputers. These encompass a wide range of vendors, operating systems, and languages, making hardware and software support increasingly difficult. Current technology allows replacement of controller computers at a relatively low cost while maintaining excellent processing power and a friendly operating environment. The new controller systems are now being designed using IBM-PC-compatible 80486-based microcomputers, a real-time Unix operating system (LynxOS), and X-windows/Motif IB, and serial interfaces have been chosen. This design supports minimizing short and long term costs by relying on proven standards for both hardware and software components. Currently, the project is in the design and prototyping stage with the first systems targeted for production in mid-1993.

  16. DPSS Laser Beam Quality Optimization Through Pump Current Tuning

    Energy Technology Data Exchange (ETDEWEB)

    Omohundro, Rob; /Newport Spectra-Physics, Santa Clara; Callen, Alice; /SLAC; Sukuta, Sydney; /San Jose City Coll.

    2012-03-30

    The goal of this study is to demonstrate how a DPSS laser beam's quality parameters can be simultaneously optimized through pump current tuning. Two DPSS lasers of the same make and model were used where the laser diode pump current was first varied to ascertain the lowest RMS noise region. The lowest noise was found to be 0.13% in this region and the best M{sup 2} value of 1.0 and highest laser output power were simultaneously attained at the same current point. The laser manufacturer reported a M{sup 2} value of 1.3 and RMS noise value of .14% for these lasers. This study therefore demonstrates that pump current tuning a DPSS laser can simultaneously optimize RMS Noise, Power and M{sup 2} values. Future studies will strive to broaden the scope of the beam quality parameters impacted by current tuning.

  17. Analysis of Thermal Effects in Laser Rod Pumped by Repetitively Pulsed Laser Diode Array

    Institute of Scientific and Technical Information of China (English)

    DAI Qin; LI Xin-zhong; WU Ri-na; WANG Xi-jun

    2007-01-01

    Based on some assumptions, the numerical model of thermal distribution in solid state laser crystal pumped by pulsed laser diode is set up due to the pumped intensity distribution. Taking into account the property of YAG materials that varies with temperature, the transient temperature distribution of the laser crystal is calculated using finite element method on condition that K is a constant and a function of temperature. Then, the influence of the pumping parameters on the thermal effect in laser crystal is also discussed. This study is helpful to optimize the design of the diode side pumped solid state lasers.

  18. Wave optics simulation of diode pumped alkali laser (DPAL)

    Science.gov (United States)

    Endo, Masamori; Nagaoka, Ryuji; Nagaoka, Hiroki; Nagai, Toru; Wani, Fumio

    2016-03-01

    A numerical simulation code for a diode pumped alkali laser (DPAL) was developed. The code employs the Fresnel- Kirchhoff diffraction integral for both laser mode and pump light propagations. A three-dimensional rate equation set was developed to determine the local gain. The spectral divergence of the pump beam was represented by a series of monochromatic beams with different wavelengths. The calculated results showed an excellent agreements with relevant experimental results. It was found that the main channel of the pump power drain is the spontaneous emission from the upper level of the lasing transition.

  19. Taming random lasers through active spatial control of the pump.

    Science.gov (United States)

    Bachelard, N; Andreasen, J; Gigan, S; Sebbah, P

    2012-07-20

    Active control of the spatial pump profile is proposed to exercise control over random laser emission. We demonstrate numerically the selection of any desired lasing mode from the emission spectrum. An iterative optimization method is employed, first in the regime of strong scattering where modes are spatially localized and can be easily selected using local pumping. Remarkably, this method works efficiently even in the weakly scattering regime, where strong spatial overlap of the modes precludes spatial selectivity. A complex optimized pump profile is found, which selects the desired lasing mode at the expense of others, thus demonstrating the potential of pump shaping for robust and controllable single mode operation of a random laser.

  20. Taming random lasers through active spatial control of the pump

    CERN Document Server

    Bachelard, Nicolas; Gigan, Sylvain; Sebbah, Patrick

    2012-01-01

    Active control of the pump spatial profile is proposed to exercise control over random laser emission. We demonstrate numerically the selection of any desired lasing mode from the emission spectrum. An iterative optimization method is employed, first in the regime of strong scattering where modes are spatially localized and can be easily selected using local pumping. Remarkably, this method works efficiently even in the weakly scattering regime, where strong spatial overlap of the modes precludes spatial selectivity. A complex optimized pump profile is found, which selects the desired lasing mode at the expense of others, thus demonstrating the potential of pump shaping for robust and controllable singlemode operation of a random laser.

  1. Frequency-doubled diode laser for direct pumping of Ti:sapphire lasers

    DEFF Research Database (Denmark)

    Müller, André; Jensen, Ole Bjarlin; Unterhuber, Angelika

    2012-01-01

    A single-pass frequency doubled high-power tapered diode laser emitting nearly 1.3 W of green light suitable for direct pumping of Ti:sapphire lasers generating ultrashort pulses is demonstrated. The pump efficiencies reached 75 % of the values achieved with a commercial solid-state pump laser....... However, the superior electro-optical efficiency of the diode laser improves the overall efficiency of the Ti:sapphire laser by a factor > 2. The optical spectrum emitted by the Ti:sapphire laser shows a spectral width of 112 nm (FWHM). Based on autocorrelation measurements, pulse widths of less than 20...... fs are measured. These results open the opportunity of establishing diode laser pumped Ti:sapphire lasers for e.g. biophotonic applications like retinal optical coherence tomography or pumping of photonic crystal fibers for CARS microscopy....

  2. Thin-disk laser pump schemes for large number of passes and moderate pump source quality

    Science.gov (United States)

    Schuhmann, Karsten; Hänsch, Theodor W.; Kirch, Klaus; Knecht, Andreas; Kottmann, Franz; Nez, Francois; Pohl, Randolf; Taqqu, David; Antognini, Aldo

    2015-11-01

    Novel thin-disk laser pump layouts are proposed yielding an increased number of passes for a given pump module size and pump source quality. These novel layouts result from a general scheme which bases on merging two simpler pump optics arrangements. Some peculiar examples can be realized by adapting standard commercially available pump optics simply by intro ducing an additional mirror-pair. More pump passes yield better efficiency, opening the way for usage of active materials with low absorption. In a standard multi-pass pump design, scaling of the number of beam passes brings ab out an increase of the overall size of the optical arrangement or an increase of the pump source quality requirements. Such increases are minimized in our scheme, making them eligible for industrial applications

  3. Thin-disk laser pump schemes for large number of passes and moderate pump source quality.

    Science.gov (United States)

    Schuhmann, Karsten; Hänsch, Theodor W; Kirch, Klaus; Knecht, Andreas; Kottmann, Franz; Nez, Francois; Pohl, Randolf; Taqqu, David; Antognini, Aldo

    2015-11-10

    Thin-disk laser pump layouts yielding an increased number of passes for a given pump module size and pump source quality are proposed. These layouts result from a general scheme based on merging two simpler pump optics arrangements. Some peculiar examples can be realized by adapting standard, commercially available pump optics with an additional mirror pair. More pump passes yield better efficiency, opening the way for the usage of active materials with low absorption. In a standard multipass pump design, scaling of the number of beam passes brings about an increase in the overall size of the optical arrangement or an increase in the pump source quality requirements. Such increases are minimized in our scheme, making them eligible for industrial applications.

  4. Thin-disk laser pump schemes for large number of passes and moderate pump source quality

    CERN Document Server

    Schuhmann, K; Kirch, K; Knecht, A; Kottmann, F; Nez, F; Pohl, R; Taqqu, D; Antognini, A

    2015-01-01

    Novel thin-disk laser pump layouts are proposed yielding an increased number of passes for a given pump module size and pump source quality. These novel layouts result from a general scheme which bases on merging two simpler pump optics arrangements. Some peculiar examples can be realized by adapting standard commercially available pump optics simply by intro ducing an additional mirror-pair. More pump passes yield better efficiency, opening the way for usage of active materials with low absorption. In a standard multi-pass pump design, scaling of the number of beam passes brings ab out an increase of the overall size of the optical arrangement or an increase of the pump source quality requirements. Such increases are minimized in our scheme, making them eligible for industrial applications

  5. A Laser-Diode End-Pumped Nd:YVO4 Slab Laser at 1342 nm

    Institute of Scientific and Technical Information of China (English)

    YAN Ying; ZHANG Heng-Li; LIU Yang; XING Ji-Chuan; XIN Jian-Guo

    2009-01-01

    A laser-diode end-pumped Nd:YV04 slab laser with a fiat-concave stable cavity at 1342nm is demonstrated. Under the pumping power of 92 W, a cw laser of output 17.8 W is obtained with the slope efficiency of 25.6%.

  6. Efficient Ho:YLF laser pumped by a Tm:fiber laser

    CSIR Research Space (South Africa)

    Koen, W

    2013-10-01

    Full Text Available A thulium fiber laser pumped Ho:YLF laser delivering 45.1 W in a near diffraction limited beam when pumped with 84.7 W is demonstrated. The optical-to-optical efficiency of 53 % compares favorably with similar Ho:YAG lasers....

  7. Assignment of the /Li-7/2 optically pumped laser transitions pumped by Ar/+/ and Kr/+/ laser lines

    Science.gov (United States)

    Verma, K. K.; Stwalley, W. C.; Zemke, W. T.

    1981-01-01

    Welling and Wellegehausen (1977) have reported a list of Na2 and Li2 lines (belonging to B-X and A-X systems) which lase when vapors of these dimers are pumped with an Ar(+) or Kr(+) laser. A description is presented of a fluorescence study of the A-X system of the (Li-7)2 molecule excited by a Kr(+) laser (6471 A). The optically pumped laser lines are identified as P and R doublets in two different fluorescence series. The conditions which favor lasing action of these lines are pointed out. All but one of the known optically pumped laser lines of (Li-7)2 along with their assignments are presented in a table. For each pumping line, several additional wavelengths are listed which satisfy the condition for laser oscillations and which might well lase well under slightly improved conditions.

  8. UPGRADES

    CERN Multimedia

    D. Contardo and J. Spalding

    2013-01-01

      LS1 and Phase 1 The detector projects targeting LS1 are progressing well, and a fully integrated schedule developed by Technical Coordination includes installation milestones and a detailed work-plan. The first chambers of the RPC system were produced and are being qualified. Production will ramp up this year to a rate of 20 chambers per month. 32 chambers of the CSC system have been fabricated for the ME4/2 CSC stations, and production proceeds at a rate of 4 per month. The new ME1/1 Front-End Board is in production and the off-detector electronics integration tests are ongoing. The new Theta Trigger Boards for the DT readout production is started and the relocation of the Sector Collector boards with new Optical Links as been successfully tested. All the components for the upgrade of the Forward Hadron Calorimeter PMTs have been received at CERN and assemblies are being qualified. The situation is similar for the Hadron Outer Calorimeter new SiPMs and readout modules. Three projects are plan...

  9. Laser-diode-pumped 1319-nm monolithic non-planar ring single-frequency laser

    Institute of Scientific and Technical Information of China (English)

    Qing Wang(王青); Chunqing Gao(高春清); Yan Zhao(赵严); Suhui Yang(杨苏辉); Guanghui Wei(魏光辉); Dongmei Hong(洪冬梅)

    2003-01-01

    Single-frequency 1319-nm laser was obtained by using a laser-diode-pumped monolithic Nd:YAG crystalwith a non-planar ring oscillator (NPRO). When the NPRO laser was pumped by an 800-μm fiber coupledlaser diode, the output power of the single-frequency 1319-nm laser was 220 mW, and the slope efficiencywas 16%. With a 100-μm fiber coupled diode laser pumped, 99-mW single-frequency 1319-nm laser wasobtained with a slope efficiency of 29%.

  10. Intensity scaling of an optically pumped potassium laser

    Science.gov (United States)

    Hurd, Edward J.; Holtgrave, Jeremy C.; Perram, Glen P.

    2015-12-01

    A pulsed, optically pumped potassium laser has been demonstrated with output intensity exceeding 7 MW/cm2. By using a surrogate pump, heat pipe gain cell, and helium pressure of 2500 Torr, the intensity of Diode Pumped Alkali Lasers (DPAL) has been increased by a factor of 38. Bottlenecking due to slow fine structure mixing can be avoided without hydrocarbon buffer gases with as many as 375 lasing photons obtained per potassium atom following a 7.4 ns pump pulse. A slope efficiency of 9.4% is achieved and primarily limited by a mismatch between pumped and cavity mode volumes. Laser performance is well described by a three-level, longitudinally averaged model without ionization.

  11. Polarization properties of laser-diode-pumped micro-grained Nd:YAG ceramic lasers

    CERN Document Server

    Otsuka, Kenju

    2008-01-01

    Detailed polarization properties have been examined in laser-diode-pumped (LD-pumped) micro-grained ceramic Nd:YAG lasers in different microchip cavity configurations. Stable linearly-polarized single-frequency oscillations, whose polarization direction coincides with that of an LD pump light, were observed in an external cavity scheme. While, in the case of a thin-slice laser scheme with coated reflective ends, elliptically-polarized single-frequency operations took place in the low pump-power regime and dynamic instabilities appeared, featuring self-induced antiphase modulations among counter-rotating circularly-polarized components belonging to the same longitudinal mode, with increasing the pump power

  12. Mathematical model of an optically pumped molecular laser

    CSIR Research Space (South Africa)

    Botha, LR

    2009-07-01

    Full Text Available pumped molecular laser Dr L R Botha, Dr C Bollig, D Esser, C Jacobs, D Preussler SAIP 2009 Durban Page 2 © CSIR 2008 www.csir.co.za Structure of talk • Introduction • Overview of HBr laser • Numerical Model • Comparison... µm laser ring oscillator & pre-amplifier 1.9 µm Optically Pumped Molecular laser @ 4 µm 95:5 HBr Absorption cell Fast detector 2.064 µm ± 1 nm Feedback control box Feedback loop 1 P ie zo m o u nt Fast detector Feedback loop 2 Gas...

  13. Picosecond holmium fibre laser pumped at 1125 \\ {\\text{nm}}

    Science.gov (United States)

    Kamynin, V. A.; Filatova, S. A.; Zhluktova, I. V.; Tsvetkov, V. B.

    2016-12-01

    We report a passively mode-locked, all-fibre holmium laser based on nonlinear polarisation rotation. As a pump source use is made of an 1125-{\\text{nm}} ytterbium-doped fibre laser. The pulse repetition rate of the holmium laser is 7.5 {\\text{MHz}}, and the pulse duration does not exceed 52 {\\text{ps}} at wavelengths of 2065 and 2080 {\\text{nm}}. The average laser output power reaches 5 {\\text{mW}}.

  14. Plasma formation in diode pumped alkali lasers sustained in Cs

    Science.gov (United States)

    Markosyan, Aram H.; Kushner, Mark J.

    2016-11-01

    In diode pumped alkali lasers (DPALs), lasing action occurs on the resonant lines of alkali atoms following pumping by broadband semiconductor lasers. The goal is to convert the efficient but usually poor optical quality of inexpensive diode lasers into the high optical quality of atomic vapor lasers. Resonant excitation of alkali vapor leads to plasma formation through the excitation transfer from the 2P states to upper lying states, which then are photoionized by the pump and intracavity radiation. A first principles global model was developed to investigate the operation of the He/Cs DPAL system and the consequences of plasma formation on the efficiency of the laser. Over a range of pump powers, cell temperatures, excitation frequency, and mole fraction of the collision mixing agent (N2 or C2H6), we found that sufficient plasma formation can occur that the Cs vapor is depleted. Although N2 is not a favored collisional mixing agent due to large rates of quenching of the 2P states, we found a range of pump parameters where laser oscillation may occur. The poor performance of N2 buffered systems may be explained in part by plasma formation. We found that during the operation of the DPAL system with N2 as the collisional mixing agent, plasma formation is in excess of 1014-1015 cm-3, which can degrade laser output intensity by both depletion of the neutral vapor and electron collisional mixing of the laser levels.

  15. Continuous-wave Raman laser pumped within a semiconductor disk laser cavity.

    Science.gov (United States)

    Parrotta, Daniele C; Lubeigt, Walter; Kemp, Alan J; Burns, David; Dawson, Martin D; Hastie, Jennifer E

    2011-04-01

    A KGd(WO₄)₂ Raman laser was pumped within the cavity of a cw diode-pumped InGaAs semiconductor disk laser (SDL). The Raman laser threshold was reached for 5.6 W of absorbed diode pump power, and output power up to 0.8 W at 1143 nm, with optical conversion efficiency of 7.5% with respect to the absorbed diode pump power, was demonstrated. Tuning the SDL resulted in tuning of the Raman laser output between 1133 and 1157 nm.

  16. Proposed Nuclear Pumped Laser Experiments Utilizing Gamma-Rays.

    Science.gov (United States)

    1980-02-25

    geometrica factor. The geometrical factor was derived in 21 geometry. The probability of a photon born in the LXe intersecting the laser tube is e - . 2wr dr...the absorbing media is pumped by a slowly rising pump, the excitation is rapidly degraded due to spontaneous emission and quenching processes. If the

  17. Efficient potassium diode pumped alkali laser operating in pulsed mode.

    Science.gov (United States)

    Zhdanov, Boris V; Rotondaro, Matthew D; Shaffer, Michael K; Knize, Randall J

    2014-07-14

    This paper presents the results of our experiments on the development of an efficient hydrocarbon free diode pumped alkali laser based on potassium vapor buffered by He gas at 600 Torr. A slope efficiency of more than 50% was demonstrated with a total optical conversion efficiency of 30%. This result was achieved by using a narrowband diode laser stack as the pump source. The stack was operated in pulsed mode to avoid limiting thermal effects and ionization.

  18. 600-W lamp pumped CW Nd:YAG laser

    Institute of Scientific and Technical Information of China (English)

    Qiang Li(李强); Zhimin Wang(王志敏); Zhiyong Wang(王智勇); Zhensheng Yu(于振声); Hong Lei(雷訇); Jiang Guo(郭江); Gang Li(李港); Tiechuan Zuo(左铁钏)

    2003-01-01

    A lamp pumped CW Nd:YAG laser is presented in this paper for the requirement of industrial application.The main factors, which affect output power and beam quality of high power solid-state laser module, are theoretically analyzed. Total electro-optics efficiency of lamp pumped Nd:YAG crystal as high as 4.0% is obtained, and output power is higher than 647 W with beam parameter product 22 mm.mrad.

  19. Pump polarization insensitive and efficient laser-diode pumped Yb:KYW ultrafast oscillator.

    Science.gov (United States)

    Wang, Sha; Wang, Yan-Biao; Feng, Guo-Ying; Zhou, Shou-Huan

    2016-02-01

    We theoretically and experimentally report and evaluate a novel split laser-diode (LD) double-end pumped Yb:KYW ultrafast oscillator aimed at improving the performance of an ultrafast laser. Compared to a conventional unpolarized single-LD end-pumped ultrafast laser system, we improve the laser performance such as absorption efficiency, slope efficiency, cw mode-locking threshold, and output power by this new structure LD-pumped Yb:KYW ultrafast laser. Experiments were carried out with a 1 W output fiber-coupled LD. Experimental results show that the absorption increases from 38.7% to 48.4%, laser slope efficiency increases from 18.3% to 24.2%, cw mode-locking threshold decreases 12.7% from 630 to 550 mW in cw mode-locking threshold, and maximum output-power increases 28.5% from 158.4 to 221.5 mW when we switch the pump scheme from an unpolarized single-end pumping structure to a split LD double-end pumping structure.

  20. Stable 811.53 nm diode laser pump source for optically pumped metastable Ar laser

    Science.gov (United States)

    Gao, Jun; Zuo, Duluo; Zhao, Jun; Li, Bin; Yu, Anlan; Wang, Xinbing

    2016-10-01

    A stable external cavity diode laser coupled with volume Bragg grating for metastable argon atoms pumping is presented. The measured maximum output power of the continuous wave is 6.5 W when the spectral width (FWHM) is less than 21 pm around 811.53 nm and the power efficiency is 68%. The tuning range of the emission wavelength is bigger than 270 pm. The calculated deviation in relative absorption efficiency caused by the fluctuations of wavelength and power is less than 4%.

  1. Comparison of different side-pumping configurations for high power laser diode pumped solid-state laser

    Institute of Scientific and Technical Information of China (English)

    Junqing Meng(孟俊清); Weibiao Chen(陈卫标); Xia Hou(侯霞); Qiquan Hu(胡企铨)

    2003-01-01

    Ray-tracing method is used to simulate the distribution of absorption in crystal rod for different sidepumping configuration. The distribution of pumping power and absorption efficiency is compared, and the numerical results are presented. The results show that the more uniform pumping and the higher absorption coefficient are obtained with a diffuse cavity. And the method of the slow axis of laser diode stack perpendicular to the axis of lasing gives the higher central pumping density.

  2. Diode-pumped Alexandrite ring laser for lidar applications

    Science.gov (United States)

    Munk, A.; Jungbluth, B.; Strotkamp, M.; Hoffmann, H.-D.; Poprawe, R.; Höffner, J.

    2016-03-01

    We present design and performance data of a diode-pumped Q-switched Alexandrite ring laser in the millijoule regime, which is longitudinally pumped by laser diode bar modules in the red spectral range. As a first step, a linear resonator was designed and characterized in qcw operation as well as in Q-switched operation. Based on these investigations, two separate linear cavities were set up, each with one Alexandrite crystal longitudinally pumped by one diode module. The two cavities are fused together and form a ring cavity which yields up to 6 mJ pulse burst energy in the qcw regime at 770 nm.

  3. Direct pumping of ultrashort Ti:sapphire lasers by a frequency doubled diode laser

    DEFF Research Database (Denmark)

    Müller, André; Jensen, Ole Bjarlin; Unterhuber, Angelika

    2011-01-01

    electro-optical efficiency of the diode laser. Autocorrelation measurements show that pulse widths of less than 20 fs can be expected with an average power of 52 mW when using our laser. These results indicate the high potential of direct diode laser pumped Ti: sapphire lasers to be used in applications...... like retinal optical coherence tomography (OCT) or pumping of photonic crystal fibers for CARS (coherent anti-stokes Raman spectroscopy) microscopy....

  4. Analysis of Laser Diode Pumped Solid-State Laser Resonator by the Transform Circle Approach

    Institute of Scientific and Technical Information of China (English)

    SONG Feng; ZHANG Guang-Yin; XU Jing-Jun; ZHANG Chao-Bo

    2000-01-01

    The typical laser characteristics of a laser diode pumped solid-state laser with a Z-type resonator structure are analyzed by the transform circle approach. Laser waists change with the thermal focus length of the lasing medium so that the output power becomes unstable. In particular, there is a very unstable operation region when the pump power is of medium magnitude. A method is put forward to avoid this situation.

  5. Four-Pass Coupler for Laser-Diode-Pumped Solid-State Laser

    Science.gov (United States)

    Coyle, Donald B.

    2008-01-01

    A four-pass optical coupler affords increased (in comparison with related prior two-pass optical couplers) utilization of light generated by a laser diode in side pumping of a solid-state laser slab. The original application for which this coupler was conceived involves a neodymium-doped yttrium aluminum garnet (Nd:YAG) crystal slab, which, when pumped by a row of laser diodes at a wavelength of 809 nm, lases at a wavelength of 1,064 nm. Heretofore, typically, a thin laser slab has been pumped in two passes, the second pass occurring by virtue of reflection of pump light from a highly reflective thin film on the side opposite the side through which the pump light enters. In two-pass pumping, a Nd:YAG slab having a thickness of 2 mm (which is typical) absorbs about 84 percent of the 809-nm pump light power, leaving about 16 percent of the pump light power to travel back toward the laser diodes. This unused power can cause localized heating of the laser diodes, thereby reducing their lifetimes. Moreover, if the slab is thinner than 2 mm, then even more unused power travels back toward the laser diodes. The four-pass optical coupler captures most of this unused pump light and sends it back to the laser slab for two more passes. As a result, the slab absorbs more pump light, as though it were twice as thick. The gain and laser cavity beam quality of a smaller laser slab in conjunction with this optical coupler can thus be made comparable to those of a larger two-pass-pumped laser slab.

  6. Polarization measurement of Cs using the pump laser beam

    CERN Document Server

    Fang, Jiancheng; Duan, Lihong; Fan, Wenfeng; Jiang, Liwei

    2015-01-01

    In the optical pumping systems based on the pump-probe arrangement, the spin polarization of the atoms is generally monitored utilizing the probe laser beam, in which way an extra perturbation must be introduced and thus affects the normal operation of the sensors. By investigating the absorption rate of the circularly polarized pump laser, here we demonstrate the feasibility of extracting the electron-spin polarization from the transmitted pump laser intensity. We experimentally validate the method in a spin-exchange relaxation free (SERF) magnetometer and the results are in excellent agreement with the theory. The scheme operates in a silent mode and features a real-time observation. We also study the corresponding magnetic field response of the SERF magnetometer and a term arising from the diffusion effects has been added to the original model to explain the discrepancy of the response.

  7. Dichroic mirror for diode pumped YAG:Nd-laser

    DEFF Research Database (Denmark)

    Dinca, Andreea; Skettrup, Torben; Lupei, V.

    1996-01-01

    The paper describes the design and realization of a dichroic mirror for a diode pumped YAG:Nd laser. The mirror is deposed on an optical glass substrate and works in optical contact with the laser crystal. The design was performed by admittance matching of the basic stack with the adjacent media...

  8. LD-pumped Ho,Tm:YLF microchip laser

    Institute of Scientific and Technical Information of China (English)

    SUN Jing-hua; ZHANG Xin-lu

    2003-01-01

    A simple rate equation model for 2μm Tm,Ho:YLF laser is given to study laser dynamics. Under low pump power, the explicit formulae for the threshold pump power and the relation between output power and incident power are obtained. The present model provides a straightforward procedure to design the laser resonator and the optical coupling system for optimization. At the same time, the experimental results are reported. At room temperature the slope efficiency is 22.4% and the typical lasing threshold is about 328mW. The theory is in good agreement with experiment.

  9. Q-switched Ho:YLF laser pumped by a Tm:GdVO4 laser.

    CSIR Research Space (South Africa)

    Esser, MJD

    2009-06-01

    Full Text Available The authors have, through careful analysis of spectroscopic data, designed and demonstrated a diode-end-pumped, quasicontinuous wave Tm:GdVO4 laser operating at 1892 nm in order to pump a Q-switched Ho:YLF laser. The Ho:YLF maximum output energy...

  10. Tapered Diode-pumped continuous-wave alexandrite laser

    OpenAIRE

    2013-01-01

    Tapered diode-pumped continuous-wave alexandrite laser Ersen Beyatli,1 Ilyes Baali,2 Bernd Sumpf,3 Götz Erbert,3 Alfred Leitenstorfer,4 Alphan Sennaroglu,1 and Umit Demirbas2,4,* 1Laser Research Laboratory, Departments of Physics and Electrical-Electronics Engineering, Koç University, Rumelifeneri, Sariyer, Istanbul 34450, Turkey 2Laser Technology Laboratory, Department of Electrical and Electronics Engineering, Antalya International University, 07190 Dosemealti, Antalya,...

  11. End-Pumped Tm:YAG Ceramic Slab Lasers

    Institute of Scientific and Technical Information of China (English)

    CHENG Xiao-Jin; XU Jian-Qiu; ZHANG Wen-Xin; JIANG Sen-Xue; PAN Yu-Bai

    2009-01-01

    Lasers from a Tm:YAG ceramic aare reported for the first time to our best knowledge. The Tm:YAG ceramic slab is end-pumped by a laser diode with central wavelength 792nm. At room temperature, the maximum continuous-wave output power is 4.5 W, and the sloping efficiency is obtained to be 20.5%. The laser spectrum of the Tm: YAG ceramic is centered at 2015 nm.

  12. High-Efficiency High-Power Nd:YAG Laser under 885 nm Laser Diode Pumping

    Institute of Scientific and Technical Information of China (English)

    LI Fang-Qin; ZHANG Xiao-Fu; ZONG Nan; YANG Jing; PENG Qin-Jun; CUI Da-Fu; XU Zu-Yan

    2009-01-01

    A high-efficiency high-power Nd:YAG laser under 885 nm laser diode (LD) pumping is demonstrated. The laser crystal is carefully designed, and the overlapping between the pump modes and the laser modes is optimized. The maximum output power at 1064 nm is 87 W under the absorbed pump power 127.7 W, corresponding to a slope efficiency of 72.4% and an optical-optical efficiency of 68.1%. The optical-optical efficiency is 58.4% for the pump power emitted directly from the LD. To our best knowledge, this is the maximal optical-optical conversion efficiency obtained for the LD end-pumped Nd:YAG lasers so far.

  13. Investigation of radial temperature gradients in diode pumped alkali lasers using tunable diode laser absorption spectroscopy

    Science.gov (United States)

    Fox, Charles D.; Perram, Glen P.

    2012-03-01

    Heat loads in Diode Pumped Alkali Lasers (DPAL) have been investigated using a diode laser to probe the radial dependence of the absorbance. A TiS pump laser heats the medium in a T=50-100°C cesium heat pipe with 5 Torr nitrogen used for quenching. A tunable diode laser probes the spectral absorbance of the cesium cell. Local alkali concentration, temperature, and saturation broadening modify Voigt lineshapes in the wing of the hyperfine split lines. The temperature within the pumped volume exceeds the wall temperature by almost 200 C.

  14. Continuously tunable solution-processed organic semiconductor DFB lasers pumped by laser diode

    DEFF Research Database (Denmark)

    Klinkhammer, Sönke; Liu, Xin; Huska, Klaus

    2012-01-01

    solutions on cm-scale surface gratings of different periods. We report optically pumped continuously tunable laser emission of 13 nm in the blue, 16 nm in the green and 19 nm in the red spectral region on a single chip respectively. Tuning behavior can be described with the Bragg-equation and the measured...... thickness profile. The laser threshold is low enough that inexpensive laser diodes can be used as pump sources....

  15. Ti:sapphire laser with long-pulse lamp pumping

    Science.gov (United States)

    Koselja, Michael P.; Kubelka, Jiri; Kvapil, Jiri

    1992-06-01

    Lamp pumping of Ti:Sapphire has some advantages over laser pumping and represents some interest due to possible applications. The paper will present laser behavior of Ti:Sapphire under very long lamp pulse pumping. Pulse lamp duration (FWHM) was more than 100 times greater than the lifetime of Ti3+. Output energy with no tuning element was achieved greater than 1.5 J with 0.12% electrical-to-optical efficiency. Dimensions of the rod used was 7 mm in diameter and 148 mm in length. The doping level of Ti3+ was 0.09% Ti2O3 in the rod. Tuning characteristics with different tuning elements are also presented. Further development to obtain CW lamp pumping operation will be discussed.

  16. Pump-Controlled Modal Interactions in Microdisk Lasers

    CERN Document Server

    Liew, Seng Fatt; Redding, Brandon; Solomon, Glenn S; Cao, Hui

    2014-01-01

    We demonstrate an effective control of nonlinear interactions of lasing modes in a semiconductor microdisk cavity by shaping the pump profile. A target mode is selected at the expense of its competing modes either by increasing their lasing thresholds or suppressing their power slopes above the lasing threshold. Despite of strong spatial overlap of the lasing modes at the disk boundary, adaptive pumping enables an efficient selection of any lasing mode to be the dominant one, leading to a switch of lasing frequency. The theoretical analysis illustrates both linear and nonlinear effects of selective pumping, and quantify their contributions to lasing mode selection. This work shows that adaptive pumping not only provides a powerful tool of controlling the nonlinear process in multimode lasers, but also enables the tuning of lasing characteristic after the lasers have been fabricated.

  17. 980nm diode laser pump modules operating at high temperature

    Science.gov (United States)

    Campbell, Jenna; Semenic, Tadej; Leisher, Paul; Bhunia, Avijit; Mashanovitch, Milan; Renner, Daniel

    2016-03-01

    Existing thermal management technologies for diode laser pumps place a significant load on the size, weight and power consumption of High Power Solid State and Fiber Laser systems, thus making current laser systems very large, heavy, and inefficient in many important practical applications. This problem is being addressed by the team formed by Freedom Photonics and Teledyne Scientific through the development of novel high power laser chip array architectures that can operate with high efficiency when cooled with coolants at temperatures higher than 50 degrees Celsius and also the development of an advanced thermal management system for efficient heat extraction from the laser chip array. This paper will present experimental results for the optical, electrical and thermal characteristics of 980 nm diode laser pump modules operating effectively with liquid coolant at temperatures above 50 degrees Celsius, showing a very small change in performance as the operating temperature increases from 20 to 50 degrees Celsius. These pump modules can achieve output power of many Watts per array lasing element with an operating Wall-Plug-Efficiency (WPE) of >55% at elevated coolant temperatures. The paper will also discuss the technical approach that has enabled this high level of pump module performance and opportunities for further improvement.

  18. Optically pumped terahertz lasers with high pulse repetition frequency: theory and design

    Institute of Scientific and Technical Information of China (English)

    Yude Sun; Shiyou Fu; Jing Wang; Zhenghe Sun; Yanchao Zhang; Zhaoshuo Tian; Qi Wang

    2009-01-01

    Optically pumped terahertz (THz) lasers with high pulse repetition frequency are designed. Such a laser includes two parts: the optically pumping laser and the THz laser. The structures of the laser are described and analyzed. The rate equations for the pulsed THz laser are given. The kinetic process and laser pulse waveform for this kind of laser are numerically calculated based on the theory of rate equations. The theoretical results give a helpful guide to the research of such lasers.

  19. Upgrade of the Central Laser Facility at the Pierre Auger Observatory and first results

    Science.gov (United States)

    Medina-Hernandez, Carlos; Wiencke, Lawrence; Mayotte, Eric; Pierre Auger Collaboration

    2015-04-01

    The Pierre Auger Observatory (PAO) explores the nature and origin of cosmic rays with energies above 1018 eV. It uses a hybrid technique that combines a Fluorescence Detector (FD) and a 3000 Km2 surface Detector (SD) array. Two laser test beam facilities are located near the center of the observatory. The Central Laser Facility (CLF) and the eXtreme Laser Facility (XLF) track the atmospheric conditions during FD's operations and perform additional functions. The CLF was upgraded substantially in 2013 with a solid state laser, new generation GPS, robotic beam calibration system, and better thermal and dust isolation. The upgrade also includes a back scatter Raman Lidar receiver, providing an independent measurement the aerosol optical depth (tau(z,t)). We describe the new features, capabilities, and applications of the updated instrument, including, tau(z,t) calculations for atmospheric monitoring using a data normalized method, laser energy calibration, and steered laser firing for arrival directions studies. We also present the first tau(z,t) results after the upgrade,using two using two independent techniques. One method uses the FD's measurements of the CLF's laser shots in bi-static configuration. The other uses the Raman LIDAR in back scattered configuration.

  20. Transverse Mode Formation in Longitudinally Pumped Miniature Slab Lasers

    Institute of Scientific and Technical Information of China (English)

    XU Jian-Qiu; YE Xin; FANG Tao

    2006-01-01

    The formation of transverse modes in longitudinally pumped miniature slab lasers is investigated theoretically and experimentally. The longitudinally non-uniform gain-guiding is studied by expanding the electric field into the Hermite-Gaussian functions that satisfy boundary conditions of the resonator. Non-Gaussian transversal beam profiles in the near field are found and the beam diameter is reduced when the pump spot becomes smaller. The experimental observation agrees with the theoretical calculation.

  1. 372-mJ long pulse pyrotechnically pumped laser

    Institute of Scientific and Technical Information of China (English)

    Nan Xiao; Zongfu Jiang; Weihong Hua; Shengfu Yuan

    2008-01-01

    A pyrotechnically pumped Nd glass laser is demonstrated by the use of pyrotechnic flashlamps composed of several chemical materials arranged in a stable plane concave resonator cavity. The flashlamp was made of chemical mixture with oxidant, fuel, and binder. The emission spectrum of pyrotechnic flame covered most of the absorption bands of Nd3+ in phosphate glass. Under 4.56-g chemical mixture pumping, long pulse output power of about 5.5 W was achieved.

  2. Tandem-pumped 1120-nm actively Q-switched fiber laser

    Institute of Scientific and Technical Information of China (English)

    王建华; 胡金萌; 张世强; 陈露璐; 房勇; 冯衍

    2015-01-01

    We report on a tandem-pumped actively Q-switched fiber laser system emitting at 1120 nm. Parasitic oscillation is challenging in Yb-doped Q-switched 1120-nm fiber laser, which is suppressed by pumping with a fiber laser at 1018 nm. At least 4 times improvement in output peak power is demonstrated in a single laser setup with 1018-nm fiber laser pumping instead of 976-nm laser diode pumping. This is, to the best of our knowledge, the first demonstration of a tandem-pumped Q-switched fiber laser.

  3. Scaling of an Optically Pumped Mid-Infrared Rubidium Laser

    Science.gov (United States)

    2015-03-26

    model for alkali metal vapor lasers : part I. Narrowband optical pumping.” Applied Physics B 101, No. 1-2, 45-56 (2010). W. Klennert, “Development...an overview,” High-Power Laser Ablation 2008. International Society for Optics and Photonics, 700521 (2008). 64 W.F. Krupke and others, “New...Physics B 89, No. 4, 595-601 (2007). P.P. Sorokin and J.R. Lankard, “Infrared Lasers Resulting from Giant Pulse Laser Excitation of Alkali Metal

  4. Laser-diode and Flash Lamp Pumped Solid-State Lasers

    Science.gov (United States)

    Garrec, Bruno Le

    2010-04-01

    Since the early 80's, most authors are considering that to enable high-average-power operation at the highest laser efficiency, it is necessary to replace flash lamp pumped solid-state lasers with laser-diode pumped solid-state lasers. This assumption is based on the fact that diode pumping has many advantages compared to flash lamp pumping that is seen as an old technology. Although it is very difficult to get true numbers, we shall show that Diode Pumped Solid State Lasers nearby the kW level have a moderate efficiency (Flash lamp pumped fusion lasers are still in the run with a low efficiency but can access high beam quality and high harmonic generation efficiency. For the ELI project, we believe that considering a flash lamp pumped laser makes sense when the amplifier can run at 1 shot/mn to delivering 200J of green light. We shall show that it is an engineering problem to be solved with the help of: adaptive optic and large non linear crystals.

  5. Analyses of the short pulse laser pumped transient collisional excited X-ray lasers

    Energy Technology Data Exchange (ETDEWEB)

    Sasaki, A.; Utsumi, T.; Moribayashi, K.; Zhidkov, A.; Kado, M.; Tanaka, M.; Hasegawa, N.; Kawachi, T. [Japan Atomic Energy Research Inst., Osaka (Japan). Advanced Photon Research Center

    2001-07-01

    The soft X-ray gain of the transient collisional excited (TCE) Ni-like Ag laser is investigated using the plasma hydrodynamics and atomic kinetics codes. The gain is calculated for a plasma produced from two 100ps laser irradiated solid target to show qualitative agreement with the experiment. The calculation shows significant improvement of the gain using a thin foil target pumped by two short laser pulses, because of a better coupling of the pump laser energy into the gain region of the plasma. The codes will provide performance prediction as well as optimization of the experimental studies of the TCE X-ray lasers. (orig.)

  6. Nonlinear fibre-optic devices pumped by semiconductor disk lasers

    Energy Technology Data Exchange (ETDEWEB)

    Chamorovskiy, A Yu; Okhotnikov, Oleg G [Optoelectronics Research Center, Tampere University of Technology, Tampere (Finland)

    2012-11-30

    Semiconductor disk lasers offer a unique combination of characteristics that are particularly attractive for pumping Raman lasers and amplifiers. The advantages of disk lasers include a low relative noise intensity (-150 dB Hz{sup -1}), scalable (on the order of several watts) output power, and nearly diffraction-limited beam quality resulting in a high ({approx}70 % - 90 %) coupling efficiency into a single-mode fibre. Using this technology, low-noise fibre Raman amplifiers operating at 1.3 {mu}m in co-propagation configuration are developed. A hybrid Raman-bismuth doped fibre amplifier is proposed to further increase the pump conversion efficiency. The possibility of fabricating mode-locked picosecond fibre lasers operating under both normal and anomalous dispersion is shown experimentally. We demonstrate the operation of 1.38-{mu}m and 1.6-{mu}m passively mode-locked Raman fibre lasers pumped by 1.29-{mu}m and 1.48-{mu}m semiconductor disk lasers and producing 1.97- and 2.7-ps pulses, respectively. Using a picosecond semiconductor disk laser amplified with an ytterbium-erbium fibre amplifier, the supercontinuum generation spanning from 1.35 {mu}m to 2 {mu}m is achieved with an average power of 3.5 W. (invited paper)

  7. Diode-Pumped Mode-Locked LiSAF Laser

    Energy Technology Data Exchange (ETDEWEB)

    None

    1996-02-01

    Under this contract we have developed Cr{sup 3+}:LiSrAlF{sub 6} (Cr:LiSAF, LiSAF) mode-locked lasers suitable for generation of polarized electrons for CEBAF. As 670 nm is an excellent wavelength for optical pumping of Cr:LiSAF, we have used a LIGHTWAVE developed 670 nm diode pump module that combines the output of ten diode lasers and yields approximately 2 Watts of optical power. By the use of a diffraction limited pump beam however, it is possible to maintain a small mode size through the length of the crystal and hence extract more power from Cr:LiSAF laser. For this purpose we have developed a 1 Watt, red 660nm laser (LIGHTWAVE model 240R) which serves as an ideal pump for Cr:LiSAF and is a potential replacement of costly and less robust krypton laser. This new system is to compliment LIGHTWAVE Series 240, and is currently being considered for commercialization. Partially developed under this contract is LIGHTWAVEs product model 240 which has already been in our production lines for a few months and is commercially available. This laser produces 2 Watts of output at 532 nm using some of the same technology developed for production of the 660nm red system. It is a potential replacement for argon ion lasers and has better current and cooling requirements and is an excellent pump source for Ti:Al{sub 2}O{sub 3}. Also, as a direct result of this contract we now have the capability of commercially developing a mode-locked 100MHz Cr:LiSAF system. Such a laser could be added to our 100 MHz LIGHTWAVE Series 131. The Series 131 lasers provide pico second pulses and were originally developed under another DOE SBIR. Both models of LIGHTWAVE Series 240 lasers, the fiber coupled pump module and the 100MHz LiSAF laser of Series 131 have been partially developed under this contract, and are commercially competitive products.

  8. The analytical investigation of temperature distribution in off-central diode-pumped lasers

    Indian Academy of Sciences (India)

    P Ealhi; A Taghavi; A Gharaati

    2008-04-01

    The influence of displacement of the pump source with respect to the crystal center on the thermal behavior of the laser crystal is studied analytically. We consider the pump energy to be deposited into the pump region which has been slightly displaced with respect to the crystal center. An analytical expression for temperature distribution for such off-central diode-pumped laser is investigated. The results are then applied to the Nd :YAG and Nd :YVO4 laser crystals and compared with the conventional diode-pumped lasers. We showed that in this special case, the temperature distribution equation in the off-central pumping convert to the conventional central pump scheme.

  9. Investigation of laser diode face-pumped high average power heat capacity laser

    Institute of Scientific and Technical Information of China (English)

    Shenjin Zhang; Shouhuan Zhou; Xiaojun Tang; Guojiang Bi; Huachang LV

    2006-01-01

    The three-dimensional (3D) pump intensity distribution in medium of the laser diode (LD) pumped highaverage power heat capacity laser is simulated by the ray tracing method, and the divergence characteristicsof fast axis and slow axis of LD are simultaneously considered. The transient 3D temperature and stressdistributions are also simulated by the finite element method (FEM) with considering the uneven heatsource distribution in medium. A LD face-pumped Nd:GGG heat capacity laser is designed. The averageoutput power is 1.49 kW with an optical-optical efficiency of 24.1%.

  10. LED pumped Nd:YAG laser development program

    Science.gov (United States)

    Farmer, G. I.; Kiang, Y. C.; Lynch, R. J.

    1973-01-01

    The results of a development program for light emitting diode (LED) pumped Nd:YAG lasers are described. An index matching method to increase the coupling efficiency of the laser is described. A solid glass half-cylinder of 5.0 by 5.6 centimeters was used for index matching and also as a pumping cavity reflector. The laser rods were 1.5 by 56 millimeters with dielectric coatings on both end surfaces. The interfaces between the diode array, glass cylinder, and laser rod were filled with viscous fluid of refractive index n = 1.55. Experiments performed with both the glass cylinder and a gold coated stainless steel reflector of the same dimensions under the same operating conditions indicate that the index matching cylinder gave 159 to 200 percent improvement of coupling efficiency over the metal reflector at various operating temperatures.

  11. Advances in NASA research on nuclear-pumped lasers

    Science.gov (United States)

    De Young, R. J.

    1982-01-01

    NASA has been primarily interested in nuclear-pumped lasers using the He-3 or U-235F6 reaction for lasant excitation. With He-3 excitation, a large volume, multiple-path He-3-Ar nuclear laser has produced an output of 1 kilowatt. Power deposition was shown to be homogeneous over this volume. The CO laser has been pumped for the first time using the He-3 reaction, producing approximately 200 Watts. Using a boron-10 coating to excite N2, nuclear lasing has been achieved in CO2 in a transfer laser configuration. Nuclear lasing of Ar-Xe has been demonstrated using fission fragment excitation from U-235F6. Research on the gas core reactor has resulted in a steady state operational power of 30 kilowatts with flowing U-235F6 in an argon vortex.

  12. Wavelength diversity in optically pumped alkali vapor lasers

    Science.gov (United States)

    Perram, Glen P.

    2017-01-01

    Alternative wavelengths for optically pumped alkali vapor lasers have been developed using single photon excitation of higher lying P-states, stimulated Raman processes, two-photon excitation of S and D states, and electric quadruple excitation on S-D transitions. Two photon excitation of Cs 72D leads to competing and cascade lasing producing red and infrared lasers operating on the D-P transitions, followed by ultraviolet, blue, the standard near infrared DPAL transitions operating on P-S transitions. The S-D pump transitions are fully bleached at pump intensities exceeding 1 MW/cm2, allowing for lasing transitions that terminate on the ground state. The kinetics of these systems are complex due to competition for population inversion among the many optical transitions. An optically pumped mid-infrared rubidium pulsed, mirrorless laser has also been demonstrated in a heat pipe along both the 62P3/2 - 62S1/2 transition at 2.73 μm and the 62P1/2 - 62S1/2 transition at 2.79 μm with a maximum energy of 100 nJ. Performance improves dramatically as the rubidium vapor density is increased, in direct contradiction with the prior work. No scaling limitations associated with energy pooling or ionization kinetics have been observed. Practical application for infrared counter measures depends on the further development of blue diode pump sources. Finally, stimulated electronic Raman scattering and hyper-Raman processes in potassium vapor near the D1 and D2 lines have been observed using a stable resonator and pulsed laser excitation. First and second order Stokes and anti-Stokes lines were observed simultaneously and independently for a pump laser tuning range exceeding 70 cm-1. When the pump is tuned between the K D1 and D2 lines, an efficient hyper-Raman process dominates with a slope efficiency that exceeds 10%. Raman shifted laser may be useful as a target illuminator or atmospheric compensation beacon for a high power diode pumped alkali laser.

  13. Cladding for transverse-pumped solid-state laser

    Science.gov (United States)

    Byer, Robert L. (Inventor); Fan, Tso Y. (Inventor)

    1989-01-01

    In a transverse pumped, solid state laser, a nonabsorptive cladding surrounds a gain medium. A single tranverse mode, namely the Transverse Electromagnetic (TEM) sub 00 mode, is provided. The TEM sub 00 model has a cross sectional diameter greater than a transverse dimension of the gain medium but less than a transverse dimension of the cladding. The required size of the gain medium is minimized while a threshold for laser output is lowered.

  14. High-power diode-pumped Tm:YLF slab laser

    CSIR Research Space (South Africa)

    Schellhorn, M

    2009-06-01

    Full Text Available The aim is to develop a high-power Tm:YLF slab laser which can be utilized to pump a Ho slab laser. A 68 W Tm:YLF slab laser was recently presented in [1] pumped from one end by a single 6-bar stack delivering ~300 W of pump power. In this work, we...

  15. Turning a random laser into a tunable singlemode laser by active pump shaping

    CERN Document Server

    Bachelard, N; Noblin, X; Sebbah, P

    2013-01-01

    A laser is not necessarily a sophisticated device: Pumping energy into an amplifying medium randomly filled with scatterers, a powder for instance, makes a perfect "random laser." In such a laser, the absence of mirrors greatly simplifies laser design, but control over emission directionality or frequency tunability is lost, seriously hindering prospects for this otherwise simple laser. We recently proposed a novel approach to harness random lasers, inspired by spatial shaping methods recently employed for coherent light control in complex media. Here, we experimentally implement this method in an optofluidic random laser where modes are spatially extended and therefore strongly overlap, making individual selection a priori impossible. We show that control over the random laser emission can indeed be regained by actively shaping the spatial profile of the optical pump. This unique degree of freedom, which has never been really exploited, allows us to select any desired wavelength and shaping of lasing modes, ...

  16. Efficient Ho:YLF laser pumped by a Tm:fiber laser

    CSIR Research Space (South Africa)

    Koen, W

    2013-07-01

    Full Text Available Laser sources emitting in the 2 micron region is of particular interest for applications in medicine, remote sensing (LIDAR) and directed infra-red countermeasures. In addition, they are also desirable pump sources for efficient optical parametric...

  17. Continuously tunable solution-processed organic semiconductor DFB lasers pumped by laser diode.

    Science.gov (United States)

    Klinkhammer, Sönke; Liu, Xin; Huska, Klaus; Shen, Yuxin; Vanderheiden, Sylvia; Valouch, Sebastian; Vannahme, Christoph; Bräse, Stefan; Mappes, Timo; Lemmer, Uli

    2012-03-12

    The fabrication and characterization of continuously tunable, solution-processed distributed feedback (DFB) lasers in the visible regime is reported. Continuous thin film thickness gradients were achieved by means of horizontal dipping of several conjugated polymer and blended small molecule solutions on cm-scale surface gratings of different periods. We report optically pumped continuously tunable laser emission of 13 nm in the blue, 16 nm in the green and 19 nm in the red spectral region on a single chip respectively. Tuning behavior can be described with the Bragg-equation and the measured thickness profile. The laser threshold is low enough that inexpensive laser diodes can be used as pump sources.

  18. Neodymium YAG lasers pumped by light-emitting diodes

    Energy Technology Data Exchange (ETDEWEB)

    Bilak, V.I.; Goldobin, I.S.; Zverev, G.M.; Kuratev, I.I.; Pashkov, V.A.; Stel' makh, M.F.; Tsvetkov, Y.V.; Solov' eva, N.M.

    1981-11-01

    The results are presented of theoretical and experimental investigations of room-temperature YAG:Nd lasers pumped by light-emitting diodes. The lasing characteristics of a laser operated at the 1.06 and 1.32 ..mu.. wavelengths were investigated in the cw and pulsed regimes and dependences of its parameters on the temperature, pulse repetition frequency, and other factors were studied. In the pulsed regime the laser efficiency was 0.2% and in the cw regime the radiation power reached 50 and 17 mW at the 1.06 and 1.32 ..mu.. wavelengths, respectively.

  19. Ho:KLuW microchip laser intracavity pumped by a diode-pumped Tm:KLuW laser

    Science.gov (United States)

    Serres, J. M.; Loiko, P. A.; Mateos, X.; Yumashev, K. V.; Kuleshov, N. V.; Petrov, V.; Griebner, U.; Aguiló, M.; Díaz, F.

    2015-07-01

    A compact intracavity-pumped microchip Ho laser is realized using stacked Tm:KLuW/Ho:KLuW crystals pumped by a laser diode at 805 nm; both crystals are cut for light propagation along the N g optical indicatrix axis and emit with polarization along the N m axis. Maximum CW output power of 285 mW is achieved at a wavelength of 2080 nm for 5.6 W absorbed pump power in the Tm:KLuW crystal with a maximum slope efficiency of 8.3 %. Maximum total (Tm3+ and Ho3+ emission) output of 887 mW with a slope efficiency of 23 % is achieved. Laser operation is obtained in the 1867-1900 nm spectral range corresponding to the Tm emission, while Ho emits at 2078-2100 nm, depending on the output coupling. The microchip Ho laser generates a near-circular output beam with M 2 < 1.1. The compact laser setup with plane-plane cavity provides automatic mode-matching condition for the Tm and Ho laser modes.

  20. Magnetic composite Hydrodynamic Pump with Laser Induced Graphene Electrodes

    KAUST Repository

    Khan, Mohammed Asadullah

    2017-05-24

    A polymer based magneto hydrodynamic pump capable of actuating saline fluids is presented. The benefit of this pumping concept to operate without any moving parts is combined with simple and cheap fabrication methods and a magnetic composite material, enabling a high level of integration. The operating principle, fabrication methodology and flow characteristics of the pump are detailed. The pump electrodes are created by laser printing of polyimide, while the permanent magnet is molded from an NdFeB powder - polydimethylsiloxane (PDMS) composite. The cross-section area of the pump is 240 mm $^2$ . The electrode length is 5 mm. The magnetic characteristics of the NdFeB-PDMS composite indicate high degree of magnetization, which increases the pump efficiency. Using a saline solution similar to seawater, the pump produces 3.4 mm/s flow velocity at a voltage of 7.5V and a current density of 30 mA/cm $^2$ .

  1. Influence of light polarization on the dynamics of optically pumped lasers

    Energy Technology Data Exchange (ETDEWEB)

    Arjona, M.; Corbalan, R. (Departament de Fisica, Universitat Autonoma de Barcelona, 08193 Bellaterra (Spain)); Laguarta, F.; Pujol, J. (Departament d' Optica i Optometria, Universitat Politecnica de Catalunya, 08222 Terrassa (Spain)); Vilaseca, R. (Departament I. D' Optica, Universitat de Valencia, 46100 Burjassot (Spain))

    1990-06-01

    The dynamic behavior of a coherently pumped ring laser with a homogeneously broadened four-level medium is analyzed theoretically, considering linearly polarized pump and generated laser beams. The laser is shown to be much more stable when these polarizations are parallel than when they are orthogonal. In the latter case the instability pump threshold can be as low as four times the first laser threshold, and the laser dynamics shows Lorenz-type features.

  2. Experimental study of the diode pumped alkali laser (DPAL)

    Science.gov (United States)

    Endo, Masamori; Nagaoka, Ryuji; Nagaoka, Hiroki; Nagai, Toru; Wani, Fumio

    2014-02-01

    A small-scale cesium diode-pumped alkali laser (DPAL) apparatus has been developed for fundamental researches. A commercial laser diode with volume Bragg grating outcoupler is used to pump the gain cell longitudinally. Both windows of the gain cell are set at Brewster's angle for minimum loss and maximum durability. Output coupling coefficient is continuously variable from 13% to 85% by the slanted quartz plate outcoupler inserted in the optical resonator. Small signal gain is measured with a laser diode probe at various gain cell temperatures. A 6.5 W continuouswave output with 56% optical-to-optical conversion efficiency (based on the absorbed power) has been achieved. A numerical simulation code is developed and its calculation results are in good agreement with the experiments.

  3. D0 Solenoid Upgrade Project: Vacuum Pumping Calculations for the D0 Solenoid

    Energy Technology Data Exchange (ETDEWEB)

    Rucinski, R.; /Fermilab

    1993-08-02

    This engineering note documents the calculations done to determine the vacuum pumping speed for the D-Zero solenoid. The raw calculations are attached. A summary of the results are listed. The vacuum pumping speed of the solenoid is determined by the conductance of the pumping path. At higher pressure ranges during initial pumpdown, the conductances will be rather high. Calculations were not done for the transient pumpdown period, only the steady state type pumping situation. The pressure is assumed to be on the order of 10E-7 torr. This is the free molecular flow regime based on Knudsen number. This pressure regime is also where the pumping speed would be least. The conductances were calculated based on pumping helium gas at a temperature of 300 Kelvin. The total conductance of the pumping path from the solenoid to the inlet of the turbomolecular pump is 11.8 L/s. The effective pumping speed of a 1000 L/s turbo pump attached to this pumping path is 11.7 L/s. The minimum required pumping speed for design purposes was set at 4.3 L/s. This value was arrived at by assuming a warm leak size (10E-8 atm-cc/sec) was not detected during fabrication of the solenoid. It is then assumed that the leak leaks cold liquid helium into the vacuum space. With this leak rate, a 4.3 L/s pumping speed would be able to maintain a 2 x 10E-7 torr pressure in the solenoid vacuum jacket. The solenoid would be able to be operated with this small leak with continuous pumping.

  4. High Efficient Continuous-Wave Ho: YAG Laser Pumped by a Diode-pumped Tm: YLF Laser at Room Temperature

    Institute of Scientific and Technical Information of China (English)

    DUAN Xiao-Ming; YAO Bao-Quan; ZHANG Yun-Jun; SONG Cheng-Wei; GAO Jing; JU You-Lun; WANG Yue-Zhu

    2008-01-01

    We present a high efficient continuous wave Ho:YAG laser pumped by a diode-pumped Tm:YLF laser with a Fabry-Perot etalon tuning at 1.91 μm. The maximum output power reaches 7.2 W when the absorbed pump power is 10.8 W.The slope efficiency (relative to the absorbed power) is 74.1%,and the Tm:YLF to Ho:YAG optical conversion efficiency of 60%,then the diode-to-Holmium optical conversion efficiency achieved is 21.0%.The wavelength is 2090 nm when the transmission of output coupler is larger than 20%.The beam quality factor is M2 ~ 1.15 measured by the travelling knife-edge method.

  5. Diode pumped erbium cascade fiber lasers

    NARCIS (Netherlands)

    Jackson, Stuart D.; Pollnau, Markus; Li, Jianfeng

    Cascading the 4I11/2 -> 4I13/2 transition at 2.8 μm and 4I13/2 -> 4I15/2 transition at 1.6 μm offers a solution to the thermal management of high power Er3+-doped fluoride fiber lasers. We demonstrate an output power of 8.2 W at 2.8 μm from an Er3+-doped fluorozirconate fiber laser with 56 W of

  6. Fibre-coupled red diode-pumped Alexandrite TEM00 laser with single and double-pass end-pumping

    Science.gov (United States)

    Arbabzadah, E. A.; Damzen, M. J.

    2016-06-01

    We report the investigation of an Alexandrite laser end-pumped by a fibre-coupled red diode laser module. Power, efficiency, spatial, spectral, and wavelength tuning performance are studied as a function of pump and laser cavity parameters. It is the first demonstration, to our knowledge, of greater than 1 W power and also highest laser slope efficiency (44.2%) in a diode-pumped Alexandrite laser with diffraction-limited TEM00 mode operation. Spatial quality was excellent with beam propagation parameter M 2 ~ 1.05. Wavelength tuning from 737-796 nm was demonstrated using an intracavity birefringent tuning filter. Using a novel double pass end-pumping scheme to get efficient absorption of both polarisation states of the scrambled fibre-delivered diode pump, a total output coupled power of 1.66 W is produced in TEM00 mode with 40% slope efficiency.

  7. Expansion cooled CO nuclear pumped laser

    Science.gov (United States)

    Davis, J. F.; Bird, P. F.; Mansfield, C. R.; Helmick, H. H.

    1979-01-01

    The paper describes a series of experiments designed to investigate the performance of a fission fragment excited CO laser with gasdynamic cooling. The experiments use a wall source of fission fragments to provide excitation of CO or CO gas mixtures. A separate investigation examines the effects on vibrational excitation distribution of CO or CO gas mixtures with the addition of UF6.

  8. Micron size laser-wire system at the ATF extraction line, recent results and ATF-II upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Aryshev, A., E-mail: alar@post.kek.j [John Adams Institute at Royal Holloway, Egham, Surrey TW20 0EX (United Kingdom); Blair, G.A.; Boogert, S.T.; Boorman, G.; Bosco, A. [John Adams Institute at Royal Holloway, Egham, Surrey TW20 0EX (United Kingdom); Corner, L. [John Adams Institute at Oxford University, Nuclear and Astrophysics Laboratory, Keble Road, Oxford OX1 3RH (United Kingdom); Deacon, L. [John Adams Institute at Royal Holloway, Egham, Surrey TW20 0EX (United Kingdom); Delerue, N.; Foster, B.; Gannaway, F. [John Adams Institute at Oxford University, Nuclear and Astrophysics Laboratory, Keble Road, Oxford OX1 3RH (United Kingdom); Hayano, H. [KEK, 1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan); Howell, D. [John Adams Institute at Oxford University, Nuclear and Astrophysics Laboratory, Keble Road, Oxford OX1 3RH (United Kingdom); Karataev, P. [John Adams Institute at Royal Holloway, Egham, Surrey TW20 0EX (United Kingdom); Nevay, L.; Newman, M.; Senanayake, R. [John Adams Institute at Oxford University, Nuclear and Astrophysics Laboratory, Keble Road, Oxford OX1 3RH (United Kingdom); Terunuma, N.; Urakawa, J. [KEK, 1-1 Oho, Tsukuba, Ibaraki 305-0801 (Japan); Walczak, R. [John Adams Institute at Oxford University, Nuclear and Astrophysics Laboratory, Keble Road, Oxford OX1 3RH (United Kingdom)

    2010-11-01

    The KEK Accelerator test facility (ATF) extraction line laser-wire system has been upgraded last year allowing the measurement of micron scale transverse size electron beams. The last measurements using the upgraded system from recent operation at the ATF are presented, demonstrating raw measurements of order 3{mu}m RMS. The main component contributions to this measurement are also discussed.

  9. Micron size laser-wire system at the ATF extraction line, recent results and ATF-II upgrade

    Science.gov (United States)

    Aryshev, A.; Blair, G. A.; Boogert, S. T.; Boorman, G.; Bosco, A.; Corner, L.; Deacon, L.; Delerue, N.; Foster, B.; Gannaway, F.; Hayano, H.; Howell, D.; Karataev, P.; Nevay, L.; Newman, M.; Senanayake, R.; Terunuma, N.; Urakawa, J.; Walczak, R.

    2010-11-01

    The KEK Accelerator test facility (ATF) extraction line laser-wire system has been upgraded last year allowing the measurement of micron scale transverse size electron beams. The last measurements using the upgraded system from recent operation at the ATF are presented, demonstrating raw measurements of order 3 μm RMS. The main component contributions to this measurement are also discussed.

  10. 946 nm Diode Pumped Laser Produces 100mJ

    Science.gov (United States)

    Axenson, Theresa J.; Barnes, Norman P.; Reichle, Donald J., Jr.

    2000-01-01

    An innovative approach to obtaining high energy at 946 nm has yielded 101 mJ of laser energy with an optical-to-optical slope efficiency of 24.5%. A single gain module resonator was evaluated, yielding a maximum output energy of 50 mJ. In order to obtain higher energy a second gain module was incorporated into the resonator. This innovative approach produced un-surprised output energy of 101 mJ. This is of utmost importance since it demonstrates that the laser output energy scales directly with the number of gain modules. Therefore, higher energies can be realized by simply increasing the number of gain modules within the laser oscillator. The laser resonator incorporates two gain modules into a folded "M-shaped" resonator, allowing a quadruple pass gain within each rod. Each of these modules consists of a diode (stack of 30 microlensed 100 Watt diode array bars, each with its own fiber lens) end-pumping a Nd:YAG laser rod. The diode output is collected by a lens duct, which focuses the energy into a 2 mm diameter flat to flat octagonal pump area of the laser crystal. Special coatings have been developed to mitigate energy storage problems, including parasitic lasing and amplified spontaneous emission (ASE), and encourage the resonator to operate at the lower gain transition at 946 nm.

  11. Future directions in 980-nm pump lasers: submarine deployment to low-cost watt-class terrestrial pumps

    Science.gov (United States)

    Gulgazov, Vadim N.; Jackson, Gordon S.; Lascola, Kevin M.; Major, Jo S.; Parke, Ross; Richard, Tim; Rossin, Victor V.; Zhang, Kai

    1999-09-01

    The demands of global bandwidth and distribution are rising rapidly as Internet usage grows. This fundamentally means that more photons are flowing within optical cables. While transmitting sources launches some optical power, the majority of the optical power that is present within modern telecommunication systems originates from optical amplifiers. In addition, modern optical amplifiers offer flat optical gain over broad wavelength bands, thus making possible dense wavelength de-multiplexing (DWDM) systems. Optical amplifier performance, and by extension the performance of the laser pumps that drive them, is central to the future growth of both optical transmission and distribution systems. Erbium-doped amplifiers currently dominate optical amplifier usage. These amplifiers absorb pump light at 980 nm and/or 1480 nm, and achieve gain at wavelengths around 1550 nm. 980 nm pumps achieve better noise figures and are therefore used for the amplification of small signals. Due to the quantum defect, 1480 nm lasers deliver more signal photon per incident photon. In addition, 1480 nm lasers are less expensive than 980 nm lasers. Thus, 1480 nm pump lasers are used for amplification in situations where noise is not critical. The combination of these traits leads to the situation where many amplifiers contain 980 nm lasers to pump the input section of the Er- doped fiber with 1480 nm lasers being used to pump the latter section of Er fiber. This can be thought of as using 980 nm lasers to power an optical pre-amplifier with the power amplification function being pump with 1480 nm radiation. This paper will focus on 980 nm pump lasers and the impact that advances in 980 nm pump technology will have on optical amplification systems. Currently, 980 nm technology is rapidly advancing in two areas, power and reliability. Improving reliability is becoming increasingly important as amplifiers move towards employing more pump lasers and using these pump lasers without redundancy

  12. Resonantly pumped room temperature Ho:LuVO₄ laser.

    Science.gov (United States)

    Yao, B Q; Cui, Z; Duan, X M; Du, Y Q; Han, L; Shen, Y J

    2014-11-01

    Spectroscopic characterization of a Ho:LuVO4 crystal grown by the Czochralski method has been performed, including the absorption and emission spectra. We demonstrate a 2 μm room temperature Ho:LuVO4 laser, resonantly pumped by a 1.94 μm Tm:YAP laser. By use of an output coupler with T=10% transmission, the Ho:LuVO4 laser generated continuous-wave output power of 2.5 W at 2074.18 nm, with a beam quality factor of Mx2=My2=1.3, for a total incident pump power of 19.4 W. The slope efficiency with respect to the pump power was 17.6%, and the optical-to-optical efficiency was 12.9%. Moreover, we obtained a Ho:LuVO4 laser that operated at 2073.77 and 2055.27 nm, by using different output couplers with transmissions of T=15 and 30%.

  13. Generation of Intense THz Pulsed Lasers Pumped Strongly by CO2 Pulsed Lasers

    Institute of Scientific and Technical Information of China (English)

    QI Chun-Chao; CHENG Zu-Hai

    2009-01-01

    A theoretical method dealing with two intense laser fields interacting with a three-level molecular system is proposed.A discussion is presented on the properties of the solutions for time-independent and time-dependent absorption coefficients and gain coemcient on resonance for strong laser fields,based on analytic evaluation of the rate equations for a homogeneously broadened,three-level molecular system.The pump intensity range can be estimated according to the analytic expression of pump saturation intensity.The effects of pulse width,gas pressure and path length on the energy absorbed from pump light are studied theoretically.The results can be applied to the analysis of pulsed,optically pumped terahertz lasers.

  14. Electric-discharge-pumped nitrogen ion laser

    Science.gov (United States)

    Laudenslager, J. B.; Pacala, T. J.; Wittig, C.

    1976-01-01

    The routine operation is described of an N2(+) laser oscillating on the first negative band system of N2(+) which is produced in a preionized transverse discharge device. The discharge design incorporates features which favor the efficient production of the excitation transfer reaction of He2(+) with N2. A capacitive discharge switched by means of a high-current grounded grid thyratron is used to meet the design requirement of a volumetric discharge in high-pressure gas mixtures where the electric discharge need not have an ultrafast rise time (greater than 10 nsec) but should be capable of transferring large quantities of stored electric energy to the gas. A peak power of 180 kW in an 8-nsec laser pulse was obtained with a 0.1% mixture of N2 in helium at a total pressure of 3 atm. The most intense laser oscillations were observed on the (0,1) vibrational transition at 427.8 microns.

  15. Optimized high-power diode laser, laser arrays, and bars for pump applications

    Science.gov (United States)

    Hülsewede, R.; Schulze, H.; Sebastian, J.; Schröder, D.; Meusel, J.; Wolf, J.; Hennig, P.

    2009-02-01

    Broad area diode laser and diode laser bars are the most efficient light sources. In comparison to solid state laser or gas laser systems the over all beam quality of the diode laser is poor. Thus most application of diode laser bars is high efficient pumping of solid state lasers converting the beam quality and scaling the power of laser systems within the kW range. The pump efficiency and the beam coupling efficiency of the diode laser pumped systems has to be increased to meet the increasing laser market demands for reduced costs. JENOPTIK Diode Lab GmbH (JDL) has optimized their high power brilliance bars to enable reliable high power operation especially, for the 9xx nm wavelength range and low far field divergences. Superior reliability with long operation time of 13,000 hours and high power operation of 200 W are demonstrated for high power bars high filling factor mounted on passively cooled heat sinks. Smaller far field divergence at high power levels requires longer cavity length and higher efficiencies in the beam coupling needs requires lower filling factors. The new high brilliance bars and arrays with 20% filling factor are showing high power operation up to 95 W and a slow axis beam divergence of less than 8° (95% power content).

  16. Efficient laser-diode end-pumped Nd:GGG lasers at 1054 and 1067 nm.

    Science.gov (United States)

    Xu, Bin; Xu, Huiying; Cai, Zhiping; Camy, P; Doualan, J L; Moncorgé, R

    2014-10-10

    Efficient and compact laser-diode end-pumped Nd:GGG simultaneous multiwavelength continuous-wave lasers at ∼1059, ∼1060 and ∼1062  nm were first demonstrated in a free-running 30 mm plano-concave laser cavity. The maximum output power was up to 3.92 W with a slope efficiency of about 53.6% with respect to the absorbed pump power. By inserting a 0.1 mm optical glass plate acting as a Fabry-Pérot etalon, a single-wavelength laser at ∼1067  nm with a maximum output power of 1.95 W and a slope efficiency of 28.5% can be obtained. Multiwavelength lasers, including those at ∼1054 or ∼1067  nm, were also achievable by suitably tilting the glass etalon. These simultaneous multiwavelength lasers provide a potential source for terahertz wave generation.

  17. High power pump laser diodes for 2μm fibre laser

    Science.gov (United States)

    Pawlik, S.; Todt, R.; Moser, M.; Romero, O.; Lichtenstein, N.

    2014-03-01

    We report on our recent developments at II-VI Laser Enterprise of laser diode sources for the 79x nm range. High power conversion efficiency in excess of 62% was demonstrated. For high power applications like Thulium fiber laser pumping we have achieved an output power of more than 12.5W in CW operation for 94 μm wide broad-area single-emitters. We added the functionality of wavelength stabilization to the laser diodes by using a distributed feedback grating (DFB). Locking has been obtained over the full current range between 1A and 4A tested so far with some margin for temperature variation. For efficient fiber laser pumping the laser diodes were integrated in a multi-emitter platform, achieving 38 W out of a 105 μm fiber within 0.15 NA.

  18. High-Reliability Pump Module for Non-Planar Ring Oscillator Laser

    Science.gov (United States)

    Liu, Duncan T.; Qiu, Yueming; Wilson, Daniel W.; Dubovitsky, Serge; Forouhar, Siamak

    2007-01-01

    We propose and have demonstrated a prototype high-reliability pump module for pumping a Non-Planar Ring Oscillator (NPRO) laser suitable for space missions. The pump module consists of multiple fiber-coupled single-mode laser diodes and a fiber array micro-lens array based fiber combiner. The reported Single-Mode laser diode combiner laser pump module (LPM) provides a higher normalized brightness at the combined beam than multimode laser diode based LPMs. A higher brightness from the pump source is essential for efficient NPRO laser pumping and leads to higher reliability because higher efficiency requires a lower operating power for the laser diodes, which in turn increases the reliability and lifetime of the laser diodes. Single-mode laser diodes with Fiber Bragg Grating (FBG) stabilized wavelength permit the pump module to be operated without a thermal electric cooler (TEC) and this further improves the overall reliability of the pump module. The single-mode laser diode LPM is scalable in terms of the number of pump diodes and is capable of combining hundreds of fiber-coupled laser diodes. In the proof-of-concept demonstration, an e-beam written diffractive micro lens array, a custom fiber array, commercial 808nm single mode laser diodes, and a custom NPRO laser head are used. The reliability of the proposed LPM is discussed.

  19. Enhancement of pump efficiency of thin disk lasers by compensation of directional image extension on pumping spot

    Science.gov (United States)

    Zamani, Sasan Seyed; Eslami, Esmaeil

    2016-03-01

    The effect of directional image extension on the total pumping spot in thin disk lasers is reviewed. Three modified pumping setups that can compensate this effect and improve the absorption pumping area are presented, and the efficiency, advantages, and disadvantages of each modified configuration are discussed. Numerical comparison between absorption intensity profiles confirms an increment of maximum pump absorption density at the central region of the pumping area with respect to normal setup. Experimental investigation for the last modified pumping arrangement is in good agreement with simulation results. Measuring laser power output with a similar simple I-shaped resonator shows an enhancement of slope efficiency up to 2.5% together with a lower laser threshold for our modified setup.

  20. Narrow line diode laser stacks for DPAL pumping

    Science.gov (United States)

    Koenning, Tobias; Irwin, David; Stapleton, Dean; Pandey, Rajiv; Guiney, Tina; Patterson, Steve

    2014-02-01

    Diode pumped alkali metal vapor lasers (DPALs) offer the promise of scalability to very high average power levels while maintaining excellent beam quality, making them an attractive candidate for future defense applications. A variety of gain media are used and each requires a different pump wavelength: near 852nm for cesium, 780nm for rubidium, 766nm for potassium, and 670nm for lithium atoms. The biggest challenge in pumping these materials efficiently is the narrow gain media absorption band of approximately 0.01nm. Typical high power diode lasers achieve spectral widths around 3nm (FWHM) in the near infrared spectrum. With state of the art locking techniques, either internal to the cavity or externally mounted gratings, the spectral width can typically be reduced to 0.5nm to 1nm for kW-class, high power stacks. More narrow spectral width has been achieved at lower power levels. The diode's inherent wavelength drift over operating temperature and output power is largely, but not completely, eliminated. However, standard locking techniques cannot achieve the required accuracy on the location of the spectral output or the spectral width for efficient DPAL pumping. Actively cooled diode laser stacks with continuous wave output power of up to 100W per 10mm bar at 780nm optimized for rubidium pumping will be presented. Custom designed external volume holographic gratings (VHGs) in conjunction with optimized chip material are used to narrow and stabilize the optical spectrum. Temperature tuning on a per-bar-level is used to overlap up to fifteen individual bar spectra into one narrow peak. At the same time, this tuning capability can be used to adjust the pump wavelength to match the absorption band of the active medium. A spectral width of <0.1nm for the entire stack is achieved at <1kW optical output power. Tuning of the peak wavelength is demonstrated for up to 0.15nm. The technology can easily be adapted to other diode laser wavelengths to pump different materials.

  1. Two-photon pumped lead halide perovskite nanowire lasers

    CERN Document Server

    Gu, Zhiyuan; Sun, Wenzhao; Li, Jinakai; Liu, Shuai; Song, Qinghai; Xiao, Shumin

    2015-01-01

    Solution-processed lead halide perovskites have shown very bright future in both solar cells and microlasers. Very recently, the nonlinearity of perovskites started to attract considerable research attention. Second harmonic generation and two-photon absorption have been successfully demonstrated. However, the nonlinearity based perovskite devices such as micro- & nano- lasers are still absent. Here we demonstrate the two-photon pumped nanolasers from perovskite nanowires. The CH3NH3PbBr3 perovskite nanowires were synthesized with one-step solution self-assembly method and dispersed on glass substrate. Under the optical excitation at 800 nm, two-photon pumped lasing actions with periodic peaks have been successfully observed at around 546 nm. The obtained quality (Q) factors of two-photon pumped nanolasers are around 960, and the corresponding thresholds are about 674?J=cm2. Both the Q factors and thresholds are comparable to conventional whispering gallery modes in two-dimensional polygon microplates. Ou...

  2. Continuous variable entanglement in a coherently pumped correlated emission laser

    Energy Technology Data Exchange (ETDEWEB)

    Tesfa, Sintayehu [Physics Department, Addis Ababa University, PO Box 1176, Addis Ababa (Ethiopia)], E-mail: sint_tesfa@yahoo.com

    2008-03-14

    Analysis of the effects of external pumping on the quantum features of cavity radiation of the two-photon correlated emission laser is presented. It turns out that the pumping process induces the atomic coherence responsible for the entanglement of the cavity radiation as well as the correlation between the photon numbers belonging to different modes, despite the arising vacuum fluctuations. The photon number correlation is found to be very close to 2 where the entanglement is relatively better. Moreover, the mean number of photon pairs decreases with the amplitude of the driving radiation which is one of the practical limitations associated with the pumping mechanism. It is also shown that the mean photon number of the radiation in mode b is less than one-third of that in mode a.

  3. Upgrade of laser and electron beam welding database

    CERN Document Server

    Furman, Magdalena

    2014-01-01

    The main purpose of this project was to fix existing issues and update the existing database holding parameters of laser-beam and electron-beam welding machines. Moreover, the database had to be extended to hold the data for the new machines that arrived recently at the workshop. As a solution - the database had to be migrated to Oracle framework, the new user interface (using APEX) had to be designed and implemented with the integration with the CERN web services (EDMS, Phonebook, JMT, CDD and EDH).

  4. High repetition rate femtosecond dye amplifier using a laser diode pumped neodymium:YAG laser

    Energy Technology Data Exchange (ETDEWEB)

    Zysset, B.; LaGasse, M.J.; Fujimoto, J.G.; Kafka, J.D.

    1989-02-06

    A high repetition rate femtosecond dye amplifier is demonstrated using a laser diode pumped Q-switched Nd:YAG laser. Amplification of wavelength tunable 300 fs pulses from a synchronously mode-locked rhodamine dye laser is achieved with a saturated gain of 70 and a small gain of 200 at a repetition rate of 800 Hz. Maximum pulse energies of 40 nJ are obtained, and pulse compression to as short as 30 fs is demonstrated.

  5. High repetition rate femtosecond dye amplifier using a laser diode pumped neodymium:YAG laser

    Science.gov (United States)

    Zysset, B.; LaGasse, M. J.; Fujimoto, J. G.; Kafka, J. D.

    1989-02-01

    A high repetition rate femtosecond dye amplifier is demonstrated using a laser diode pumped Q-switched Nd:YAG laser. Amplification of wavelength tunable 300 fs pulses from a synchronously mode-locked rhodamine dye laser is achieved with a saturated gain of 70 and a small gain of 200 at a repetition rate of 800 Hz. Maximum pulse energies of 40 nJ are obtained, and pulse compression to as short as 30 fs is demonstrated.

  6. Quasi-CW Diode Laser End-pumped Yb3+∶GlassMicrochip Laser

    Institute of Scientific and Technical Information of China (English)

    DAI Shixun; HU Lili; LIU Zhuping; HUANG Guosong; JIANG Zhonghong; YASUKAZU Izawa

    2002-01-01

    Quasi-CW diode-pumped Yb3+∶borate glass and Yb3+∶phosphate glass microchip lasers have been reported. From Yb3+∶phosphate glass laser, the maximum average output power was 31 mW and the optical-optical conversion efficiency was 5%.The maximum average output power was 18 mW, and optical-optical conversion efficiency was 3% for Yb3+∶borate glass laser.

  7. Diode-pumped Yb3+:KYF4 femtosecond laser.

    Science.gov (United States)

    Coluccelli, Nicola; Galzerano, Gianluca; Tonelli, Mauro; Laporta, Paolo; Svelto, Orazio

    2008-05-15

    Passive mode locking of a diode-pumped Yb(3+):KYF(4) laser is demonstrated using a semiconductor saturable absorber mirror. A high-stability, transform-limited pulse train with a repetition rate of 57 MHz is generated. Solitonlike pulses with maximum average output power of 250 mW, minimum pulse duration of 170 fs, and rms time jitter of 360 fs were obtained.

  8. Thin-Film Evaporative Cooling for Side-Pumped Laser

    Science.gov (United States)

    Stewart, Brian K. (Inventor)

    2010-01-01

    A system and method are provided for cooling a crystal rod of a side-pumped laser. A transparent housing receives the crystal rod therethrough so that an annular gap is defined between the housing and the radial surface of the crystal rod. A fluid coolant is injected into the annular gap such the annular gap is partially filled with the fluid coolant while the radial surface of the crystal rod is wetted as a thin film all along the axial length thereof.

  9. Efficient, resonantly pumped, room-temperature Er3+:GdVO4 laser.

    Science.gov (United States)

    Ter-Gabrielyan, N; Fromzel, V; Ryba-Romanowski, W; Lukasiewicz, T; Dubinskii, M

    2012-04-01

    We report an efficient room-temperature operation of a resonantly pumped Er3+:GdVO4 laser at 1598.5 nm. The maximum continuous wave (CW) output power of 3.5 W with slope efficiency of 56% was achieved with resonant pumping by an Er-fiber laser at 1538.6 nm. With pumping by a commercial laser diode bar stack, a quasi-CW (QCW) output of 7.7 W and maximum slope efficiency of ~53% versus absorbed pump power were obtained. This is believed to be the first resonantly (in-band) pumped, room-temperature Er3+:GdVO4 laser.

  10. Compact KGd(WO4)2 picosecond pulse-train synchronously pumped broadband Raman laser.

    Science.gov (United States)

    Gao, Xiao Qiang; Long, Ming Liang; Meng, Chen

    2016-08-20

    We demonstrate an efficient approach to realizing an extra-cavity, synchronously pumped, stimulated Raman cascaded process under low repetition frequency (1 kHz) pump conditions. We also construct a compact KGd(WO4)2 (KGW) crystal picosecond Raman laser that has been configured as the developed method. A pulse-train green laser pumped the corresponding 70 mm long KGW crystal Raman cavity. The pulse train contains six pulses, about 800 ps separated, for every millisecond; thus, it can realize synchronous pumping between pump pulse and the pumped Raman cavity. The investigated system produced a collinear Raman laser output that includes six laser lines covering the 532 to 800 nm spectra. This is the first report on an all-solid-state, high-average-power picosecond collinear multi-wavelength (more than three laser components) laser to our knowledge. This method has never been reported on before in the synchronously pumped stimulated Raman scattering (SRS) realm.

  11. Method and system for homogenizing diode laser pump arrays

    Energy Technology Data Exchange (ETDEWEB)

    Bayramian, Andrew James

    2016-05-03

    An optical amplifier system includes a diode pump array including a plurality of semiconductor diode laser bars disposed in an array configuration and characterized by a periodic distance between adjacent semiconductor diode laser bars. The periodic distance is measured in a first direction perpendicular to each of the plurality of semiconductor diode laser bars. The diode pump array provides a pump output propagating along an optical path and characterized by a first intensity profile measured as a function of the first direction and having a variation greater than 10%. The optical amplifier system also includes a diffractive optic disposed along the optical path. The diffractive optic includes a photo-thermo-refractive glass member. The optical amplifier system further includes an amplifier slab having an input face and position along the optical path and separated from the diffractive optic by a predetermined distance. A second intensity profile measured at the input face of the amplifier slab as a function of the first direction has a variation less than 10%.

  12. High-efficiency diode-pumped femtosecond Yb:YAG ceramic laser

    DEFF Research Database (Denmark)

    Zhou, Binbin; Wei, Z.Y.; Zou, Y.W.

    2010-01-01

    A highly efficient diode-end-pumped femtosecond Yb:yttrium aluminum garnet (YAG) ceramic laser was demonstrated. Pumped by a 968 nm fiber-coupled diode laser, 1.9 W mode-locked output power at a repetition rate of 64.27 MHz was obtained with 3.5 W absorbed pump power, corresponding to a slope...

  13. Photonic crystal fibers for supercontinuum generation pumped by a gain-switched CW fiber laser

    DEFF Research Database (Denmark)

    Larsen, Casper; Noordegraaf, Danny; Hansen, Kim P.

    2012-01-01

    Supercontinuum generation in photonics crystal fibers (PCFs) pumped by CW lasers yields high spectral power density and average power. However, such systems require very high pump power and long nonlinear fibers. By on/off modulating the pump diodes of the fiber laser, the relaxation oscillations...

  14. Laser-diode pumped Nd:GdVO4 ultraviolet laser with LBO frequency tripling

    Institute of Scientific and Technical Information of China (English)

    WANG Yun; FAN Xiu-wei; PENG Qian-qian; LIU Jie; HE Jing-liang

    2005-01-01

    We have demonstrated a laser-diode pumped Nd:GdVO4 extra-cavity frequency tripling ultraviolet laser with a LBO crystal in this paper.Under the acousto-optic (A-O) Q-switched operation,we have obtained 355 nm ultraviolet laser,with pulse width of 25 ns and pulse repetition rate of 20 kHz.By using a type Ⅰ non-critical phase-matched LBO crystal,the SHG output power of 822 mW is achieved at the incident pump power of 16 W. The output power of 355nm UV laser is 260mW with a type Ⅱ phase-matched LBO crystal,and the conversion efficiency (1 064 nm-355 nm ) is 5.9 %.The power stability of 355 nm laser is 1.7% in 1 h.

  15. Gain dynamics of a free-space nitrogen laser pumped by circularly polarized femtosecond laser pulses

    CERN Document Server

    Yao, Jinping; Zeng, Bin; Chu, Wei; Li, Guihua; Ni, Jielei; Zhang, Haisu; Jing, Chenrui; Zhang, Chaojin; Xu, Huailiang; Cheng, Ya; Xu, Zhizhan

    2015-01-01

    We experimentally demonstrate ultrafast dynamic of generation of a strong 337-nm nitrogen laser by injecting an external seed pulse into a femtosecond laser filament pumped by a circularly polarized laser pulse. In the pump-probe scheme, it is revealed that the population inversion between the excited and ground states of N2 for the free-space 337-nm laser is firstly built up on the timescale of several picoseconds, followed by a relatively slow decay on the timescale of tens of picoseconds, depending on the nitrogen gas pressure. By measuring the intensities of 337-nm signal from nitrogen gas mixed with different concentrations of oxygen gas, it is also found that oxygen molecules have a significant quenching effect on the nitrogen laser signal. Our experimental observations agree with the picture of electron-impact excitation.

  16. Compact intra-cavity frequency doubled line beam green laser by a laser diode array pumped

    Science.gov (United States)

    Yan, Boxia; Qi, Yan; Wang, Yanwei

    2016-10-01

    Compact, high power, and low-cost green laser light sources are needed in projection-related applications such as digital cinema, rear-projection television, simulators, and command and control stations. We report a LD array directly pumped intracavity SHG Nd:YVO4/PPMgLN laser without lens or waveguide in this letter. A compact 3.12 W green laser was demonstrated by intra-cavity frequency doubled using a PPMgLN bulk crystal by a 19-emitter LD array pumped(single bar), the conversion efficiency from input LD array was 9.2%. A line-beam output suitable for laser projectors was generated, which has the potential to be scalable to small volumes and low costs for laser projection displays.

  17. Designing a Broadband Pump for High-Quality Micro-Lasers via Modified Net Radiation Method

    Science.gov (United States)

    Nechayev, Sergey; Reusswig, Philip D.; Baldo, Marc A.; Rotschild, Carmel

    2016-12-01

    High-quality micro-lasers are key ingredients in non-linear optics, communication, sensing and low-threshold solar-pumped lasers. However, such micro-lasers exhibit negligible absorption of free-space broadband pump light. Recently, this limitation was lifted by cascade energy transfer, in which the absorption and quality factor are modulated with wavelength, enabling non-resonant pumping of high-quality micro-lasers and solar-pumped laser to operate at record low solar concentration. Here, we present a generic theoretical framework for modeling the absorption, emission and energy transfer of incoherent radiation between cascade sensitizer and laser gain media. Our model is based on linear equations of the modified net radiation method and is therefore robust, fast converging and has low complexity. We apply this formalism to compute the optimal parameters of low-threshold solar-pumped lasers. It is revealed that the interplay between the absorption and self-absorption of such lasers defines the optimal pump absorption below the maximal value, which is in contrast to conventional lasers for which full pump absorption is desired. Numerical results are compared to experimental data on a sensitized Nd3+:YAG cavity, and quantitative agreement with theoretical models is found. Our work modularizes the gain and sensitizing components and paves the way for the optimal design of broadband-pumped high-quality micro-lasers and efficient solar-pumped lasers.

  18. Diode-pumped all-solid-state lasers and applications

    CERN Document Server

    Parsons-Karavassilis, D

    2002-01-01

    This thesis describes research carried out by the within the Physics Department at Imperial College that was aimed at developing novel all-solid-state laser sources and investigating potential applications of this technology. A description of the development, characterisation and application of a microjoule energy level, diode-pumped all-solid-state Cr:LiSGAF femtosecond oscillator and regenerative amplifier system is presented. The femtosecond oscillator was pumped by two commercially available laser diodes and produced an approx 80 MHz pulse train of variable pulse duration with approx 30 mW average output power and a tuning range of over approx 60 nm. This laser oscillator was used to seed a regenerative amplifier, resulting in adjustable repetition rate (single pulse to 20 kHz) approx 1 mu J picosecond pulses. These pulses were compressed to approx 150 fs using a double-pass twin-grating compressor. The amplifier's performance was investigated with respect to two different laser crystals and different pul...

  19. Longitudinal discharge pumped low-pressure XeCl laser

    Science.gov (United States)

    Fedorov, A. I.

    2013-10-01

    We have studied output parameters of a XeCl and a N2 laser pumped by a longitudinal discharge with automatic spark UV preionisation. The output parameters of a low-pressure (30 Torr) XeCl laser operating with Ar, Ne and He as buffer gases or with no buffer gas have been optimised for the first time. The laser generated 5-ns FWHM pulses with an average power of 0.5 mW and output energy of 0.15 mJ. Under longitudinal discharge pumping, an output energy per unit volume of 1.8 J L-1 atm-1 was reached using helium as a buffer gas. With argon-containing and buffer-free mixtures, it was 1.5 J L-1 atm-1. The N2 laser generated 2.5-ns FWHM pulses with an average power of 0.35 mW and output energy of 0.05 mJ.

  20. Ultrafast laser pump/x-ray probe experiments

    Energy Technology Data Exchange (ETDEWEB)

    Larsson, J.; Judd, E.; Schuck, P.J. [Univ. of California, Berkeley, CA (United States)] [and others

    1997-04-01

    In an ongoing project aimed at probing solids using x-rays obtained at the ALS synchrotron with a sub-picosecond time resolution following interactions with a 100 fs laser pulse, the authors have successfully performed pump-probe experiments limited by the temporal duration of ALS-pulse. They observe a drop in the diffraction efficiency following laser heating. They can attribute this to a disordering of the crystal. Studies with higher temporal resolution are required to determine the mechanism. The authors have also incorporated a low-jitter streakcamera as a diagnostic for observing time-dependant x-ray diffraction. The streakcamera triggered by a photoconductive switch was operated at kHz repetition rates. Using UV-pulses, the authors obtain a temporal response of 2 ps when averaging 5000 laser pulses. They demonstrate the ability to detect monochromatized x-ray radiation from a bend-magnet with the streak camera by measuring the pulse duration of a x-ray pulse to 70 ps. In conclusion, the authors show a rapid disordering of an InSb crystal. The resolution was determined by the duration of the ALS pulse. They also demonstrate that they can detect x-ray radiation from a synchrotron source with a temporal resolution of 2ps, by using an ultrafast x-ray streak camera. Their set-up will allow them to pursue laser pump/x-ray probe experiments to monitor structural changes in materials with ultrafast time resolution.

  1. Enhanced efficiency of AlGaInP disk laser by in-well pumping.

    Science.gov (United States)

    Mateo, C M N; Brauch, U; Schwarzbäck, T; Kahle, H; Jetter, M; Abdou Ahmed, M; Michler, P; Graf, T

    2015-02-09

    The performance of a 665-nm GaInP disk laser operated continuous-wave at 15°C both in-well-pumped at 640 nm and barrier pumped at 532 nm is reported. The efficiency with respect to the absorbed power was enhanced by 3.5 times when using a 640-nm pump instead of a 532-nm pump. In-well pumping which is based on the absorption of the pump photons within the quantum-well heterostructures of the gain region instead of short-wavelength absorption in the barrier and spacer regions reduces the quantum defect between pump and laser photon and hence the heat generation. A slope efficiency of 60% with respect to the absorbed pump power was obtained by in-well pumping at 15°C. Continuous-wave laser operation was further demonstrated at heat sink temperatures of up to 55°C. Both the measurement of photoluminescence and COMSOL simulation show that the overall heat load in the in-well pumped laser is smaller than in the barrier-pumped laser. These results demonstrate the potential of optical in-well pumping for the operation of red AlGaInP disk lasers if combined with means for efficient pump-light absorption.

  2. Rapid prototyping of a micro pump with laser micromachining

    Science.gov (United States)

    Wong, C. Channy; Chu, Dahwey; Liu, Sally L.; Tuck, Melanie R.; Mahmud, Zahid; Amatucci, Vincent A.

    1995-09-01

    A microelectrohydrodynamic (EHD) injection pump has been developed using laser micromachining technoogy. Two desings have been fabricated, tested, and evaluated. The first design has two silicon pieces with KOH-etched wells which are stacked on the tpo of each other. The wells are etched on one side of the wafer and gold is deposited on the other side to serve as the pump electrodes. A Nd:YAG laser is used to drill an array of circular holes in the well region of both silicon parts. This creates a grid distribution with a square pattern. Next the well regions of the silicon parts are aligned, and the parts are bonded together using a Staystik thermoplastic. The pump unit is then mounted into a ceramic package with a large hole drilled in the bottom of the package to permit fluid flow. Aluminum ribbon wire bonds are used to connect the pump electrodes to the package leads. Isolation of metallization and wires is achieved by filling the package well and coating the wires with polyimide. When a voltage is applied at the electrodes, ions are injected into the working fluid, such as an organic solvent, thus inducing flow. The second design has the silicon parts oriented 'back-to-back' and bonded together with Stayform. A 'back-to-back' design will decrease the grid distance so that a smaller voltage is required for pumping. Preliminary results have demonstrated that this micropump can achieve a pressure head of about 287 Pa with an applied voltage of 120 Volt.

  3. Proton and Ion Acceleration on the Contrast Upgraded Texas Petawatt Laser

    Science.gov (United States)

    McCary, Edward; Roycroft, Rebecca; Jiao, Xuejing; Kupfer, Rotem; Tiwari, Ganesh; Wagner, Craig; Yandow, Andrew; Franke, Philip; Dyer, Gilliss; Gaul, Erhard; Toncian, Toma; Ditmire, Todd; Hegelich, Bjorn; CenterHigh Energy Density Science Team

    2016-10-01

    Recent upgrades to the Texas Petawatt (TPW) laser system have eliminated pre-pulses and reduced the laser pedestal, resulting in improved laser contrast. Previously unwanted pre-pulses and amplified spontaneous emission (ASE) would ionize targets thinner than 1 micron, leaving an under-dense plasma which was not capable of accelerating ions to high energies. After the upgrade the contrast was drastically improved allowing us to successfully shoot targets as thin as 20 nm without plasma mirrors. We have also observed evidence of relativistic transparency and Break-Out Afterburner (BOA) ion acceleration when shooting ultra-thin, nanometer scale targets. Data taken with a wide angle ion spectrometer (IWASP) showed the characteristic asymmetry of BOA in the plane orthogonal to the laser polarization on thin targets but not on micron scale targets. Thick micron scale targets saw improvement as well; shots on 2 μm thick gold targets saw ions with energies up to 100 MeV, which broke the former record proton energy on the TPW. Switching the focusing optic from an f/3 parabolic mirror to an f/40 spherical mirror showed improvement in the number of low energy protons created, and provided a source for hundreds of picosecond heating of aluminum foils for warm dense matter measurements.

  4. Optimization of electron-beam pumped excimer laser

    Science.gov (United States)

    Lowum, T. F.; Swecker, J. L.

    The output energy of an electron-beam pumped xenon flouride laser has been enhanced by optimizing certain electron-gun and gas-mix parameters. The optimized e-gun parameters include anode-cathode spacing, magnetic field strength, and cathode voltage. The optimized laser gas parameters include NF3 concentration, Xe concentration, and total pressure. The shortest anode-cathode spacing (9 cm), the strongest magnetic guide field (1600 Gauss), and the highest cathode voltage (375 kV) gave the highest laser output. The optimum gas concentrations were 0.05 percent NF3, 0.3 percent Xe, with Ne added to bring the total gas pressure to 60 psia. The energy degraded by 2 percent per shot with this gas mix.

  5. Optically pumped tunable HBr laser in the mid-infrared region

    CSIR Research Space (South Africa)

    Koen, W

    2014-06-01

    Full Text Available An optically pumped tunable HBr laser has been demonstrated for the first time. The pump source was a single-frequency Ho:YLF laser and amplifier system, which was locked to the 2064 nm absorption line of HBr. Laser oscillation was demonstrated...

  6. Superradiant dye solution laser with two-photon picosecond optical pumping

    Energy Technology Data Exchange (ETDEWEB)

    Prokhorenko, V.I.; Tikhonov, E.A.; Shpak, M.T.

    1981-01-01

    A superradiant (superfluorescent) dye solution laser with two-photon picosecond pumping was constructed for the first time. A preliminary study was made of the principal characteristics of the output radiation of this laser which performed up-conversion of the frequency of the pump radiation. The physical mechanisms governing the operation of lasers of this type were analyzed.

  7. Development of laser diode-pumped high average power solid-state laser for the pumping of Ti:sapphire CPA system

    Energy Technology Data Exchange (ETDEWEB)

    Maruyama, Yoichiro; Tei, Kazuyoku; Kato, Masaaki; Niwa, Yoshito; Harayama, Sayaka; Oba, Masaki; Matoba, Tohru; Arisawa, Takashi; Takuma, Hiroshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-03-01

    Laser diode pumped all solid state, high repetition frequency (PRF) and high energy Nd:YAG laser using zigzag slab crystals has been developed for the pumping source of Ti:sapphire CPA system. The pumping laser installs two main amplifiers which compose ring type amplifier configuration. The maximum amplification gain of the amplifier system is 140 and the condition of saturated amplification is achieved with this high gain. The average power of fundamental laser radiation is 250 W at the PRF of 200 Hz and the pulse duration is around 20 ns. The average power of second harmonic is 105 W at the PRF of 170 Hz and the pulse duration is about 16 ns. The beam profile of the second harmonic is near top hat and will be suitable for the pumping of Ti:sapphire laser crystal. The wall plug efficiency of the laser is 2.0 %. (author)

  8. Fiber laser pumped high power mid-infrared laser with picosecond pulse bunch output.

    Science.gov (United States)

    Wei, Kaihua; Chen, Tao; Jiang, Peipei; Yang, Dingzhong; Wu, Bo; Shen, Yonghang

    2013-10-21

    We report a novel quasi-synchronously pumped PPMgLN-based high power mid-infrared (MIR) laser with picosecond pulse bunch output. The pump laser is a linearly polarized MOPA structured all fiberized Yb fiber laser with picosecond pulse bunch output. The output from a mode-locked seed fiber laser was directed to pass through a FBG reflector via a circulator to narrow the pulse duration from 800 ps to less than 50 ps and the spectral FWHM from 9 nm to 0.15 nm. The narrowed pulses were further directed to pass through a novel pulse multiplier through which each pulse was made to become a pulse bunch composing of 13 sub-pulses with pulse to pulse time interval of 1.26 ns. The pulses were then amplified via two stage Yb fiber amplifiers to obtain a linearly polarized high average power output up to 85 W, which were then directed to pass through an isolator and to pump a PPMgLN-based optical parametric oscillator via quasi-synchronization pump scheme for ps pulse bunch MIR output. High MIR output with average power up to 4 W was obtained at 3.45 micron showing the feasibility of such pump scheme for ps pulse bunch MIR output.

  9. Red laser-diode pumped 806 nm Tm3+: ZBLAN fibre laser

    Science.gov (United States)

    Juárez-Hernández, M.; Mejía, E. B.

    2017-06-01

    A Tm3+-doped fluorozirconate (ZBLAN) fibre laser operating CW at 806 nm when diode-pumped at 687 nm is described for the first time. This device is based on the 3F4  →  3H6 transition, and is suitable for first telecom window and sensing applications. A slope efficiency of 50.3% and low threshold pump-power of 11.6 mW were obtained. Maximum output power of 15 mW for 40 mW coupled pump was achieved.

  10. Transverse modes of a diode-laser pumped monolithic unidirectional non-planar ring laser

    Institute of Scientific and Technical Information of China (English)

    Keying Wu(吴克瑛); Suhui Yang(杨苏辉); Guanghui Wei(魏光辉)

    2003-01-01

    Diode-laser pumped monolithic single-frequency non-planar ring laser has the advantages of compactness,reliability and high efficiency. But when the pump power is high enough, the thermal effect will be seriousand the high-order transverse modes will appear. Therefore the single-mode output power is limited. Inthis paper, the mechanism of generating the high-order transverse modes in the monolithic unidirectionalnon-planar ring cavity is analyzed using ray tracing method. The calculated results are in agreement withthe experiments.

  11. High-temperature diode laser pumps for directed energy fiber lasers (Conference Presentation)

    Science.gov (United States)

    Kanskar, Manoj; Bao, Ling; Chen, Zhigang; DeVito, Mark; Dong, Weimin; Grimshaw, Mike P.; Guan, Xinguo; Hemenway, David M.; Martinsen, Robert; Zhang, Jim; Zhang, Shiguo

    2017-05-01

    Kilowatt-class fiber lasers and amplifiers are becoming increasingly important building blocks for power-scaling laser systems in various different architectures for directed energy applications. Currently, state-of-the-art Yb-doped fiber lasers operating near 1060 nm operate with optical-to-optical power-conversion efficiency of about 66%. State-of-the-art fiber-coupled pump diodes near 975 nm operate with about 50% electrical-to-fiber-coupled optical power conversion efficiency at 25C heatsink temperature. Therefore, the total system electrical-to-optical power conversion efficiency is about 33%. As a result, a 50-kW fiber laser will generate 75 kW of heat at the pump module and 25 kW at the fiber laser module with a total waste heat of 100 kW. It is evident that three times as much waste heat is generated at the pump module. While improving the efficiency of the diodes primarily reduces the input power requirement, increasing the operating temperature primarily reduces the size and weight for thermal management systems. We will discuss improvement in diode laser design, thermal resistance of the package as well as improvement in fiber-coupled optical-to-optical efficiency to achieve high efficiency at higher operating temperature. All of these factors have a far-reaching implication in terms of significantly improving the overall SWAP requirements thus enabling DEW-class fiber lasers on airborne and other platforms.

  12. Comparison of Nd:YAG Ceramic Laser Pumped at 885 nm and 808 nm

    Institute of Scientific and Technical Information of China (English)

    ZONG Nan; ZHANG Xiao-Fu; MA Qing-Lei; WANG Bao-Shan; CUI Da-Fu; PENG Qin-Jun; XU Zu-Yan; PAN Yu-Bai; FENG Xi-Qi

    2009-01-01

    Laser performance of 1064 nm domestic Nd: YA G ceramic lasers for 885 nm direct pumping and 808 nm traditional pumping are compared. Higher slope efficiency of 34% and maximum output power of 16.5 W are obtained for the 885nm pump with a 6ram length 1 at% Nd:YAG ceramic. The advantages for 885nm direct pumping are discussed in detail. This pumping scheme for highly doping a Nd:YAG ceramic laser is considered as an available way to generate high power and good beam quality simultaneously.

  13. 2-µm Tm:Lu₂O₃ ceramic disk laser intracavity-pumped by a semiconductor disk laser.

    Science.gov (United States)

    Saarinen, Esa J; Vasileva, Elena; Antipov, Oleg; Penttinen, Jussi-Pekka; Tavast, Miki; Leinonen, Tomi; Okhotnikov, Oleg G

    2013-10-07

    A proof-of-principle study of a 1.97-µm Tm:Lu2O3 ceramic disk laser, intracavity pumped by a 1.2-µm semiconductor disk laser, is presented. The demonstrated concept allows for improved pump absorption and takes advantage of the broad wavelength coverage provided by semiconductor disk laser technology. For thin disk lasers the small thickness of the gain element typically leads to inefficient pump light absorption. This problem is usually solved by using a complex multi-pass pump arrangement. In this study we address this challenge with a new laser concept of an intracavity pumped ceramic thin disk laser. The output power at 1.97 µm was limited to 250 mW due to heat spreader-less mounting scheme of the ceramic gain disk.

  14. Janus Upgrade using brewster angle disk amplifier technology. [Janus laser system

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, J.; Boben, R.; Blocker, R.; Clark, J.; Henesian, M.; Victoria, J.; Mayo, S.; Patton, H.; Pedersen, K.; Strange, N.; Swain, J.

    1990-10-24

    The Nuclear Test and Experimental Science Program (NTES) has requested that the Laser Program design and price an upgrade to the Janus laser system (JANUS UPGRADE) capable of reliably delivering in excess of 200 joules per beamline in a range of pulse forms to three experiment areas. The facility is to have the following characteristics: three experiment areas, two high energy beams, each with 200--400 joule/1 ns at a wavelength of 1.053 or 1.064 microns, and 125--250 J/1 ns when frequency doubled, one probe beam (0.1 J rated at 30 ps) to be used for interferometry, and reliable operation. The proposed facility would occupy approximately 5600 ft{sup 2} and be located in the Bldg. 174 complex. A block diagram of the entire facility is shown in Fig. 1. The facility is further defined by the Work Breakdown Structure (also shown in Fig. 1). The main elements of the WBS are the conventional facility and modifications thereof (WBS 1), special equipment (WBS 2), the laser (WBS 3), the experiment areas (WBS 4), the controls and data acquisition system (WBS 5), and the project integration (WBS 6). The experiment area has three target chambers and uses diagnostic hardware now in Janus. 12 figs., 4 tabs.

  15. Powerful red-green-blue laser source pumped with a mode-locked thin disk laser.

    Science.gov (United States)

    Brunner, Felix; Innerhofer, Edith; Marchese, Sergio V; Südmeyer, Thomas; Paschotta, Rüdiger; Usami, Takeshi; Ito, Hiromasa; Kurimura, Sunao; Kitamura, Kenji; Arisholm, Gunnar; Keller, Ursula

    2004-08-15

    We present a red-green-blue laser source with average powers of 8 W in the red, 23 W in the green, and 10.1 W in the blue. The entire pump power for the nonlinear conversion stages is provided by a single laser oscillator without any amplifier stages. Our system does not require any synchronized cavities, and all nonlinear crystals except one are critically phase matched at room temperature.

  16. The double-end-pumped cubic Nd:YVO4 laser: Temperature distribution and thermal stress

    Indian Academy of Sciences (India)

    P Elahi; S Morshedi

    2010-01-01

    Thermal effects of a double-end-pumped cubic Nd:YVO4 laser crystal are investigated in this paper. A detailed analysis of temperature distribution and thermal stress in cubic crystal with circular shape pumping is discussed. It has been shown that by considering the total input powers as constant, the double-end-pumped configurations with equal pump power can be considered as having a minimum thermal effect with respect to the other end-pumped configuration.

  17. Reliable pump sources for high-energy class lasers

    Science.gov (United States)

    Wölz, Martin; Pietrzak, Agnieszka; Kindsvater, Alex; Wolf, Jürgen; Meusel, Jens; Hülsewede, Ralf; Sebastian, Jürgen

    2015-05-01

    High-energy class laser systems operating at high average power are destined to serve fundamental research and commercial applications. System cost is becoming decisive, and JENOPTIK supports future developments with the new range of 500 W quasi-continuous wave (QCW) laser diode bars. In response to different strategies in implementing high-energy class laser systems, pump wavelengths of 880 nm and 940 nm are available. The higher power output per chip increases array irradiance and reduces the size of the optical system, lowering system cost. Reliability testing of the 880 nm laser diode bar has shown 1 Gshots at 500 W and 300 μs pulse duration, with insignificant degradation. Parallel operation in eight-bar diode stacks permits 4 kW pulse power operation. A new high-density QCW package is under development at JENOPTIK. Cost and reliability being the design criteria, the diode stacks are made by simultaneous soldering of submounts and insulating ceramic. The new QCW stack assembly technology permits an array irradiance of 12.5 kW/cm². We present the current state of the development, including laboratory data from prototypes using the new 500 W laser diode in dense packaging.

  18. Optically pumped planar waveguide lasers: Part II: Gain media, laser systems, and applications

    Science.gov (United States)

    Grivas, Christos

    2016-01-01

    The field of optically pumped planar waveguide lasers has seen a rapid development over the last two decades driven by the requirements of a range of applications. This sustained research effort has led to the demonstration of a large variety of miniature highly efficient laser sources by combining different gain media and resonator geometries. One of the most attractive features of waveguide lasers is the broad range of regimes that they can operate, spanning from continuous wave and single frequency through to the generation of femtosecond pulses. Furthermore, their technology has experienced considerable advances to provide increased output power levels, deriving benefits from the relative immunity from the heat generated in the gain medium during laser operation and the use of cladding-pumped architectures. This second part of the review on optically pumped planar waveguide lasers provides a snapshot of the state-of-the-art research in this field in terms of gain materials, laser system designs, and as well as a perspective on the status of their application as real devices in various research areas.

  19. Low-threshold terahertz molecular laser optically pumped by a quantum cascade laser

    Directory of Open Access Journals (Sweden)

    A. Pagies

    2016-06-01

    Full Text Available We demonstrate a low-threshold, compact, room temperature, and continuous-wave terahertz molecular laser optically pumped by a mid-infrared quantum cascade laser. These characteristics are obtained, thanks to large dipole transitions of the active medium: NH3 (ammonia in gas state. The low-power (<60 mW laser pumping excites the molecules, thanks to intense mid-infrared transitions around 10.3 μm. The molecules de-excite by stimulated emission on pure inversion “umbrella-mode” quantum transitions allowed by the tunnel effect. The tunability of the quantum cascade laser gives access to several pure inversion transitions with different rotation states: we demonstrate the continuous-wave generation of ten laser lines around 1 THz. At 1.07 THz, we measure a power of 34 μW with a very low-threshold of 2 mW and a high differential efficiency of 0.82 mW/W. The spectrum was measured showing that the linewidth is lower than 1 MHz. To our knowledge, this is the first THz molecular laser pumped by a solid-state source and this result opens the way for compact, simple, and efficient THz source at room temperature for imaging applications.

  20. Fiber laser pumped burst-mode operated picosecond mid-infrared laser

    Institute of Scientific and Technical Information of China (English)

    魏凯华; 姜培培; 吴波; 陈滔; 沈永行

    2015-01-01

    We demonstrate a compact periodically poled MgO-doped lithium niobate (MgO:PPLN)-based optical parametric oscillator (OPO) quasi-synchronously pumped by a fiber laser system with burst-mode operation. The pump source is a peak-power-selectable pulse-multiplied picosecond Yb fiber laser. The chirped pulses from a figure of eight-cavity mode-locked fiber laser seed are narrowed to a duration of less than 50 ps using an FBG refl ector and a circulator. The narrowed pulses are directed to pass through a pulse multiplier and to form pulse bunches, each of which is composed of 13 sub-pulses. The obtained pulse bunches are amplified by two-stage fiber pre-amplifiers:one-stage is core-pumped and the other is cladding-pumped. A fiberized acousto–optic modulator is inserted to control the pulse repetition rate (PRR) of the pulse bunches before they are power-amplified in the final amplifier stage with a large mode area (LMA) PM Yb-doped fiber. The maximum average powers from the final amplifier are 85 W, 60 W, and 45 W respectively, corresponding to the PRR of 2.72 MHz, 1.36 MHz, and 0.68 MHz. The amplified pulses are directed to pump an MgO:PPLN-based optical parametric oscillator (OPO). A maximum peak power at 3.45 µm is obtained approximately to be 8.4 kW. Detailed performance characteristics are presented.

  1. DBR-free optically pumped semiconductor disk lasers

    Science.gov (United States)

    Yang, Zhou; Albrecht, Alexander R.; Cederberg, Jeffrey G.; Sheik-Bahae, Mansoor

    2015-03-01

    Optically pumped semiconductor disk lasers (SDLs) provide high beam quality with high average-power power at designer wavelengths. However, material choices are limited by the need for a distributed Bragg reflector (DBR), usually monolithically integrated with the active region. We demonstrate DBR-free SDL active regions, which have been lifted off and bonded to various transparent substrates. For an InGaAs multi-quantum well sample bonded to a diamond window heat spreader, we achieved CW lasing with an output power of 2 W at 1150 nm with good beam quality.

  2. Runaway electron beam control for longitudinally pumped metal vapor lasers

    Science.gov (United States)

    Kolbychev, G. V.; Kolbycheva, P. D.

    1995-08-01

    Physics and techniques for producing of the pulsed runaway electron beams are considered. The main obstacle for increasing electron energies in the beams is revealed to be a self- breakdown of the e-gun's gas-filled diode. Two methods to suppress the self-breakdown and enhance the volumetric discharge producing the e-beam are offered and examined. Each of them provides 1.5 fold increase of the ceiling potential on the gun. The methods also give the ways to control several guns simultaneously. Resulting in the possibility of realizing the powerful longitudinal pumping of metal-vapor lasers on self-terminated transitions of atoms or ions.

  3. Increasing nuclear safety and operational reliability by upgrading the charging pump mechanical sealing system

    Energy Technology Data Exchange (ETDEWEB)

    Loenhout, Gerard van [Flowserve Corporation, Etten-Leur (Netherlands); Nilsson, Peter [Flowsys Technologies AB, Moelndal (Sweden); Jehander, Magnus [Ringhals AB, Vaeroebacka (Sweden)

    2016-03-15

    For the Ringhals-2 nuclear power plant, three installed centrifugal pumps were designated to have a combined High Head Safety Injection function, as well as a Chemical Volume Control System function. The pumps were originally installed with rubber bellow type mechanical seals, which over time had demonstrated an unreliable sealing performance by displaying high leakages. In 2002, the Ringhals Maintenance engineers initiated to identify a more reliable and robust shaft sealing solution. In 2007, the project was launched and the installation of the first, new mechanical sealing solution took place in the autumn of 2011. In October 2014, these mechanical seals were dismantled and inspected. The inspection confirmed the expected reliability of the new solution.

  4. Increasing nuclear safety and operational reliability by upgrading the charging pump mechanical sealing system

    Energy Technology Data Exchange (ETDEWEB)

    Loenhout, Gerard van [Flowserve Corporation, Etten-Leur (Netherlands); Nilsson, Peter [Flowsys Technologies AB, Moelndal (Sweden); Jehander, Magnus [Ringhals AB, Vaeroebacka (Sweden)

    2016-07-01

    For the Ringhals-2 nuclear power plant, three installed centrifugal pumps were designated to have a combined High Head Safety Injection function, as well as a Chemical Volume Control System function. The pumps were originally installed with rubber bellow type mechanical seals, which over time had demonstrated an unreliable sealing performance by displaying high leakages. In 2002, the Ringhals Maintenance engineers initiated to identify a more reliable and robust shaft sealing solution. In 2007, the project was launched and the installation of the first, new mechanical sealing solution took place in the autumn of 2011. In October 2014, these mechanical seals were dismantled and inspected. The inspection confirmed the expected reliability of the new solution.

  5. Influence of absorbed pump profile on the temperature distribution within a diode side-pumped laser rod

    Indian Academy of Sciences (India)

    M H MOGHTADER DINDARLU; H TEHRANI M KAVOS; H SAGHAFIFAR; A MALEKI; GH SOLOOKINEJAD; M JABBARI

    2017-02-01

    In this paper, an analytical model for temperature distribution of the side-pumped laser rod is extracted. This model can be used for side-pumped laser rods whose absorbed pump profile is a Gaussian profile. Then, it is validated by numerical results which exhibit a good agreement with the analytical results. Afterwards, by considering a general expression for super-Gaussian and top-hat profiles, and solving the heat equation, the influence of profile width and super-Gaussian exponent of the profile on temperature distribution are investigated.Consequently, the profile width turns out to have a greater influence on the temperature compared to the type of the profile.

  6. Influence of absorbed pump profile on the temperature distribution within a diode side-pumped laser rod

    Science.gov (United States)

    Moghtader Dindarlu, M. H.; Tehrani, M. Kavosh; Saghafifar, H.; Maleki, A.; Solookinejad, Gh; Jabbari, M.

    2017-02-01

    In this paper, an analytical model for temperature distribution of the side-pumped laser rod is extracted. This model can be used for side-pumped laser rods whose absorbed pump profile is a Gaussian profile. Then, it is validated by numerical results which exhibit a good agreement with the analytical results. Afterwards, by considering a general expression for super-Gaussian and top-hat profiles, and solving the heat equation, the influence of profile width and super-Gaussian exponent of the profile on temperature distribution are investigated. Consequently, the profile width turns out to have a greater influence on the temperature compared to the type of the profile.

  7. Simple highly efficient pumping configuration in high-power thin-disk laser

    Science.gov (United States)

    Seyedzamani, Sasan; Eslami, Esmaeil

    2017-08-01

    A simple high-power thin-disk pumping configuration using a radiation combination of four commercially available laser-diode stacks is introduced. Two setup modifications are presented to compensate the nonsuitable shape of the pumping spot arising from low beam quality in our combination method. The effects of setup modifications on pumping spot shapes are confirmed by ray tracing simulations using Trace-pro™ software. All setups are arranged in the laboratory, and the experimental measurements show pumping spots improvements on the disk due to modifications in agreement with simulation results. Output power measurements show that by adapting the pumping spot size to the disk cooling capacity the modified setups can deliver higher output powers and efficiencies. Furthermore, the modifications reduce the laser threshold and improve output laser beam quality. Hence, the modifications make the simple four laser-diodes beam combination applicable for thin-disk laser pumping.

  8. Pump-probe laser development for the European X-ray Free-Electron Laser facility

    Science.gov (United States)

    Lederer, Max J.; Pergament, Mikhail; Kellert, Martin; Mendez, Cruz

    2012-10-01

    The successful implementation of superconducting LINAC technology at the European XFEL will boost the time averaged X-RAY power density substantially above current values. In fact, the XFEL will operate at repetition rates of up to 4.5MHz. However, this high pulse rate occurs only during 600μs long bursts of 10Hz repetition rate, rendering up to 27000 pulses per second. Matching this peculiar burst mode operation is a requirement also for the pump-probe femtosecond laser used in experiments. There is currently no commercially available femtosecond laser technology offering this kind of output at close to mJ-level energies per pulse and sub-20fs pulse width. We will outline the scheme of the pump-probe laser currently under development at the European XFEL. The laser design is based on a noncollinear optical parametric amplifier (NOPA) which will be pumped by sub-picosecond pulses from a high power, frequency-doubled Yb:YAG slab amplifier, delivering up to 20kW of fundamental average power during a burst. The design aims at highest possible flexibility regarding intra-burst rep-rates and pulse energies. Also, the use of uncompressed as well as compressed NOPA pump pulses at fundamental wavelength will enhance the flexibility in experiments.

  9. Laser emission from diode-pumped Nd:YAG ceramic waveguide lasers realized by direct femtosecond-laser writing technique.

    Science.gov (United States)

    Salamu, Gabriela; Jipa, Florin; Zamfirescu, Marian; Pavel, Nicolaie

    2014-03-10

    We report on realization of buried waveguides in Nd:YAG ceramic media by direct femtosecond-laser writing technique and investigate the waveguides laser emission characteristics under the pump with fiber-coupled diode lasers. Laser pulses at 1.06 μm with energy of 2.8 mJ for the pump with pulses of 13.1-mJ energy and continuous-wave output power of 0.49 W with overall optical efficiency of 0.13 were obtained from a 100-μm diameter circular cladding waveguide realized in a 0.7-at.% Nd:YAG ceramic. A circular waveguide of 50-μm diameter yielded laser pulses at 1.3 μm with 1.2-mJ energy.

  10. Continuous-wave theory of Yb:YAG end-pumped thin-disk lasers.

    Science.gov (United States)

    Jafari, Ahmad Khayat; Aas, Mehdi

    2009-01-01

    The fundamental principles of the operation of a thin-disk laser are presented. We derived equations from a set of coupled rate equations that predict that the characteristics of a laser are affected by the Boltzmann occupation factors of the pump and the laser states simultaneously. The model is used to investigate the influence of the effective parameters on the operational efficiency of an end-pumped Yb:YAG disk laser. Based on our results, we examined laser output power as a function of output coupler reflectivity, crystal thickness or doping concentration, number of the pump beam passes, and temperature.

  11. Challenges of high power diode-pumped lasers for fusion energy

    Institute of Scientific and Technical Information of China (English)

    Bruno; Le; Garrec

    2014-01-01

    This paper reviews the different challenges that are encountered in the delivery of high power lasers as drivers for fusion energy.We will focus on diode-pumped solid-state lasers and we will highlight some of the main recent achievements when using ytterbium,cryogenic cooling and ceramic gain media.Apart from some existing fusion facilities and some military applications of diode-pumped solid-state lasers,we will show that diode-pumped solid-state lasers are scalable to inertial fusion energy(IFE)’s facility level and that the all-fiber laser scheme is very promising.

  12. Improving Lifetime of Quasi-CW Laser Diode Arrays for Pumping 2-Micron Solid State Lasers

    Science.gov (United States)

    Amzajerdian, Farzin; Meadows, Byron L.; Baker, Nathaniel R.; Barnes, Bruce W.; Singh, Upendra N.; Kavaya, Michael J.

    2007-01-01

    Operating high power laser diode arrays in long pulse regime of about 1 msec, which is required for pumping 2-micron thulium and holmium-based lasers, greatly limits their useful lifetime. This paper describes performance of laser diode arrays operating in long pulse mode and presents experimental data on the active region temperature and pulse-to-pulse thermal cycling that are the primary cause of their premature failure and rapid degradation. This paper will then offer a viable approach for determining the optimum design and operational parameters leading to the maximum attainable lifetime.

  13. Partially end-pumped Nd:YAG slab laser with a hybrid resonator.

    Science.gov (United States)

    Du, K; Wu, N; Xu, J; Giesekus, J; Loosen, P; Poprawe, R

    1998-03-01

    A Nd:YAG slab is partially end pumped by a diode laser stack with three diode laser bars. The pumped volume has a rectangular cross section. A hybrid resonator, which is stable in the plane of small dimension and is off-axis unstable in the plane of large dimension of the gain cross section, was used to yield highly efficient laser operation at diffraction-limited beam quality. The laser design and experimental results are reported.

  14. Diode-pumped double passively Q-switched Nd:GdVO4 laser

    Institute of Scientific and Technical Information of China (English)

    LIU Min; LIU Shu-shan; LI Lei; WANG Wei-wei; CHEN Fei; LIU Jie

    2008-01-01

    Through using both Cr4+:YAG and GaAs saturable absorbers, a diode-pumped double passively Q-switched Nd:GdVO4 laser is realized and compared with a single passively Q-switched laser. This laser can generate symmetric pulse temporal profiles and shorter pulses. A laser pulse width of 17 ns has been achieved with the incident pump power of 8.5 W.

  15. Laser emission from a solar-pumped fiber.

    Science.gov (United States)

    Mizuno, Shintaro; Ito, Hiroshi; Hasegawa, Kazuo; Suzuki, Takenobu; Ohishi, Yasutake

    2012-03-12

    We report the realization of a solar-pumped fiber laser (SPFL) using a double-clad (a center core/ an inner clad working also as optical waveguide/ an outer clad) Nd-doped fluoride optical fiber as a laser medium. With a compact off-axis parabolic mirror of 5 cm in aperture diameter, the natural sunlight is concentrated by a factor 10⁴, and introduced partly into the core of the fiber and partly into the inner clad in which the light is guided in some distance and transferred to the core after all. We have obtained clear laser spectrum characteristics with approximately 0.01 nm full-width-half-maximum of the laser line at the peak wavelength of 1053.7 nm, a low-lasing threshold of 49.1 mW, a slope efficiency of 6.6%, and a total efficiency of 1.76%. Further optimization of the medium properties, optical cavity, and concentration technique will yield higher efficiency and lower threshold.

  16. Two-Photon-Pumped Perovskite Semiconductor Nanocrystal Lasers.

    Science.gov (United States)

    Xu, Yanqing; Chen, Qi; Zhang, Chunfeng; Wang, Rui; Wu, Hua; Zhang, Xiaoyu; Xing, Guichuan; Yu, William W; Wang, Xiaoyong; Zhang, Yu; Xiao, Min

    2016-03-23

    Two-photon-pumped lasers have been regarded as a promising strategy to achieve frequency up-conversion for situations where the condition of phase matching required by conventional approaches cannot be fulfilled. However, their practical applications have been hindered by the lack of materials holding both efficient two-photon absorption and ease of achieving population inversion. Here, we show that this challenge can be tackled by employing colloidal nanocrystals of perovskite semiconductors. We observe highly efficient two-photon absorption (with a cross section of 2.7 × 10(6) GM) in toluene solutions of CsPbBr3 nanocrystals that can excite large optical gain (>500 cm(-1)) in thin films. We have succeeded in demonstrating stable two-photon-pumped lasing at a remarkable low threshold by coupling CsPbBr3 nanocrystals with microtubule resonators. Our findings suggest perovskite nanocrystals can be used as excellent gain medium for high-performance frequency-up-conversion lasers toward practical applications.

  17. Measurement of heat pump processes induced by laser radiation

    Science.gov (United States)

    Garbuny, M.; Henningsen, T.

    1983-01-01

    A series of experiments was performed in which a suitably tuned CO2 laser, frequency doubled by a Tl3AsSe37 crystal, was brought into resonance with a P-line or two R-lines in the fundamental vibration spectrum of CO. Cooling or heating produced by absorption in CO was measured in a gas-thermometer arrangement. P-line cooling and R-line heating could be demonstrated, measured, and compared. The experiments were continued with CO mixed with N2 added in partial pressures from 9 to 200 Torr. It was found that an efficient collisional resonance energy transfer from CO to N2 existed which increased the cooling effects by one to two orders of magnitude over those in pure CO. Temperature reductions in the order of tens of degrees Kelvin were obtained by a single pulse in the core of the irradiated volume. These measurements followed predicted values rather closely, and it is expected that increase of pulse energies and durations will enhance the heat pump effects. The experiments confirm the feasibility of quasi-isentropic engines which convert laser power into work without the need for heat rejection. Of more immediate potential interest is the possibility of remotely powered heat pumps for cryogenic use, such applications are discussed to the extent possible at the present stage.

  18. Polarization/Spatial Combining of Laser-Diode Pump Beams

    Science.gov (United States)

    Gelsinger, Paul; Liu, Duncan

    2008-01-01

    A breadboard version of an optical beam combiner is depicted which make it possible to use the outputs of any or all of four multimode laser diodes to pump a non-planar ring oscillator (NPRO) laser. The output of each laser diode has a single-mode profile in the meridional plane containing an axis denoted the 'fast' axis and a narrower multimode profile in the orthogonal meridional plane, which contains an axis denoted the 'slow' axis and a narrower multimode profile in the orthogonal meridional plane, which contains an axis denoted the 'slow' axis. One of the purposes served by the beam-combining optics is to reduce the fast-axis numerical aperture (NA) of the laser-diode output to match the NA of the optical fiber. Along the slow axis, the unmodified laser-diode NA is already well matched to the fiber optic NA, so no further slow-axis beam shaping is needed. In this beam combiner, the laser-diode outputs are collimated by aspherical lenses, then half-wave plates and polarizing beam splitters are used to combine the four collimated beams into two beams. Spatial combination of the two beams and coupling into the optical fiber is effected by use of anamorphic prisms, mirrors, and a focusing lens. The anamorphic prisms are critical elements in the NA-matching scheme, in that they reduce the fast-axis beam width to 1/6 of its original values. Inasmuch as no slow-axis beam shaping is needed, the collimating and focusing lenses are matched for 1:1 iumaging. Because these lenses are well corrected for infinite conjugates the combiner offers diffraction-limited performance along both the fast and slow axes.

  19. Functional possibilities for forming different inverse population distributions in diode-side-pumped laser heads

    Energy Technology Data Exchange (ETDEWEB)

    Grechin, S G; Nikolaev, P P; Sharandin, E A [N.E. Bauman Moscow State Technical University, Moscow (Russian Federation)

    2014-10-31

    The functional possibilities of diode-side-pumped laser heads of solid-state lasers for forming inverse population distributions of different types are analysed. The invariants determining the relationship between the laser head parameters upon scaling are found. The results of comparative experimental studies are presented. (lasers)

  20. Theoretical and Experimental studies on CH{sub 3}OH THz Laser Pumped by Pulse Carbon Dioxide Laser

    Energy Technology Data Exchange (ETDEWEB)

    Fei Fei; Wang Jing; Tian Zhaoshuo; Zhang Yanchao; Fu Shiyou; Wang Qi, E-mail: tianzhaoshuo@126.com [Information Optoelectronics Research Institute, Harbin Institute of Technology at Weihai, Sandong, Weihai, 264209 (China)

    2011-02-01

    In this paper, according to the molecular structure and vibration mode of micro-asymmetric gyroscope CH{sub 3}OH molecule, dynamic process of optically pumped Terahertz laser is analyzed theoretically. The rate equation models based on three level systems are given according to the theory of typical laser rate equation. The output THz pulsed laser waveform is obtained by solving the rate equation model. An all-metal Terahertz laser pumped by RF waveguide carbon dioxide laser is designed with CH{sub 3}OH as its working gas. The pulsed Terahertz laser output is obtained. The waveform and repetition frequency of the optically pumped laser are measured in the experiments. The Terahertz laser designed does not need water cooling system. It also has the advantages of simple structure and small size.

  1. 407 W End-pumped Multi-segmented Nd:YAG Laser.

    Science.gov (United States)

    Kracht, Dietmar; Wilhelm, Ralf; Frede, Maik; Dupré, Klaus; Ackermann, Lothar

    2005-12-12

    A composite crystalline Nd:YAG rod consisting of 5 segments with different dopant concentrations for high power diode end-pumping is presented. A maximum laser output power of 407 W with an optical-to-optical efficiency of 54 % was achieved by longitudinal pumping with a high power laser diode stack.

  2. High efficient diode-pumped Tm:YAP laser at room temperature

    Institute of Scientific and Technical Information of China (English)

    Yufeng Li; Baoquan Yao; Yuezhu Wang; Youlun Ju; Guangjun Zhao; Yanhua Zong; Jun Xu

    2007-01-01

    A high efficient diode-pumped Tm:YAP laser is reported. The maximum output power at 1981 nm is 5.2 W and the slope efficiency is 30%. Unpolarized absorption near 800 nm and unpolarized fluorescence spectra near 1800 nm pumped by laser diode (LD) are measured. In addition, the relationship between operation temperature and output power is discussed.

  3. Single-frequency operation of a diode-pumped green laser using multi-Brewster plates

    Institute of Scientific and Technical Information of China (English)

    Quan Zheng(郑权); Ling Zhao(赵岭); Longsheng Qian(钱龙生)

    2003-01-01

    In a diode-pumped, KTP intracavity frequency-doubled green laser, multi-Brewster plates are used toachieve high power single-frequency operation. With a simple experimental setup, single-frequency opera-tion of the diode-pumped green laser with output of 46 and 218 mW is obtained by one and three Brewsterplate, respectively.

  4. The effect of incident angle of pumping light on Cholesteric Liquid Crystal tunable laser wavelength

    CERN Document Server

    Yin, Xiangbao

    2014-01-01

    One notable feature of dye doped cholesteric liquid crystal is the variation of pitch and refractive index as the incidence angle of the pumping light shifts. Based on this feature, this paper studies the effects of pumping light's incidence angle on emission properties of the dye doped cholesteric liquid crystal tunable laser. First, we investigated the relationship among the concentration of chiral reagent, the incidence angle of the pumping light, and the pitch of liquid-crystal display (LCD); then we made a tunable-wavelength laser and pumped the prepared sample with 532nm laser outputted from the Nd: YAG multi-frequency pulse laser. As the incident angle of the pumping light shifts between 20 {\\deg} ~ 90 {\\deg}, the tuning range of the wavelength emitted by the laser reaches 10.73nm, ranging between 647.38nm and 658.11nm.

  5. High-average-power diode-pumped Yb: YAG lasers

    Energy Technology Data Exchange (ETDEWEB)

    Avizonis, P V; Beach, R; Bibeau, C M; Emanuel, M A; Harris, D G; Honea, E C; Monroe, R S; Payne, S A; Skidmore, J A; Sutton, S B

    1999-10-01

    A scaleable diode end-pumping technology for high-average-power slab and rod lasers has been under development for the past several years at Lawrence Livermore National Laboratory (LLNL). This technology has particular application to high average power Yb:YAG lasers that utilize a rod configured gain element. Previously, this rod configured approach has achieved average output powers in a single 5 cm long by 2 mm diameter Yb:YAG rod of 430 W cw and 280 W q-switched. High beam quality (M{sup 2} = 2.4) q-switched operation has also been demonstrated at over 180 W of average output power. More recently, using a dual rod configuration consisting of two, 5 cm long by 2 mm diameter laser rods with birefringence compensation, we have achieved 1080 W of cw output with an M{sup 2} value of 13.5 at an optical-to-optical conversion efficiency of 27.5%. With the same dual rod laser operated in a q-switched mode, we have also demonstrated 532 W of average power with an M{sup 2} < 2.5 at 17% optical-to-optical conversion efficiency. These q-switched results were obtained at a 10 kHz repetition rate and resulted in 77 nsec pulse durations. These improved levels of operational performance have been achieved as a result of technology advancements made in several areas that will be covered in this manuscript. These enhancements to our architecture include: (1) Hollow lens ducts that enable the use of advanced cavity architectures permitting birefringence compensation and the ability to run in large aperture-filling near-diffraction-limited modes. (2) Compound laser rods with flanged-nonabsorbing-endcaps fabricated by diffusion bonding. (3) Techniques for suppressing amplified spontaneous emission (ASE) and parasitics in the polished barrel rods.

  6. Efficient Pumping Scheme by Direct Excitation of Upper Laser Level in Nd:CNGG

    Institute of Scientific and Technical Information of China (English)

    CAO Ning; HE Kun-Na; GAO Chun-Qing; LI Qi-Nan; ZHAO Yan-Ying; XU Chang-Wen; WEI Zhi-Yi; FENG Bao-Hua; ZHANG Zhi-Guo; ZHANG Huai-Jin; WANG Ji-Yang

    2008-01-01

    We report an efficient pumping scheme which involves a direct excitation of the upper lasing level of a four-level laser in a Nd-doped Ca3(NbGa)2-xGa3O12 (Nd:CNGG) by using a tunable Ti:sapphire, 700-920nm, cw pump source. The slope efficiency is improved from 10.5% of the traditional band pumping at 808nm to 21.8% of the direct pumping at 882nm. The influence of pumping wavelength on lasing is discussed. We present a scheme of double pumping for lasing.

  7. Laser Diode Pumped 1.54μm Er:Yb:Phosphate Glass Continuous Wave Compact Laser

    Institute of Scientific and Technical Information of China (English)

    孟凡臻; 宋峰; 张潮波; 丁欣; 商美茹; 张光寅

    2003-01-01

    We report a cw Er3+ :Yb3+ co-doped phosphate glass laser pumped by a laser diode. The maximum output power of 78.3mW and a slope efficiency of 15.25% were achieved. The laser spectral region was from 1532nm to 1535nm, with the peak laser wavelength at 1534nm. The laser modes and time stability were also measured.The thermal effect had little influence on the output in our experiment.

  8. Penning neon plasma laser pumped by a compact accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Derzhiev, V.I.; Zhidkov, A.G.; Koval' , A.V.; Skakun, V.S.; Tarasenko, V.F.

    1988-01-01

    A study is made of the emission characteristics of a neon laser (wavelengths, 585.3, 724.5, and 703.2 nm) in the afterglow (50-120 ns) of a plasma generated by a short (less than 10 ns) electron beam pulse (20-100 A/sq cm) during the longitudinal and transverse pumping of dense (0.5-3 atm) He-Ne-Ar(Kr) and Ne-H2 mixtures. It is shown experimentally that preheating has a negative effect on the lasing characteristics. The relaxation kinetics of the He-Ne-Ar mixture and the emission characteristics of the neon yellow line are calculated; the results are in good agreement with measured lasing characteristics. 7 references.

  9. Laser pumped (4)He magnetometer with light shift suppression.

    Science.gov (United States)

    Lin, Zaisheng; Wang, He; Peng, Xiang; Wu, Teng; Guo, Hong

    2016-11-01

    We report a laser-pumped (4)He atomic magnetometer with light shift suppression through the atomic sensor itself. A linearly polarized light is used to optically align the (4)He metastable atoms and we monitor the magneto-optical double resonance (MODR) signals produced by the left- and right-circularly orthogonal components. It is shown that light shift leads to the atomic alignment to orientation conversion effect, and thus, the difference between the two MODR signals. One of these two MODR signals is locked at the Larmor frequency and is used to measure the ambient magnetic field, while the differential signal is, simultaneously, fed back to suppress the light shift. The scheme could be of the advantage to the design of compact magnetometers by reducing the systematic errors due to light shift.

  10. Measurements of enlarged blood pump models using Laser Doppler Anemometer.

    Science.gov (United States)

    Chua, L P; Yu, S C; Leo, H L

    2000-01-01

    In an earlier study (Chua et al., 1998, 1999a), a 5:1 enlarged model of the Kyoto-NTN Magnetically Suspended Centrifugal Blood Pump (Akamatsu et al., 1995) with five different impeller blade profiles was designed and constructed. Their respective flow characteristics with respect to (1) the three different blade profile designs: forward, radial, and backward, (2) the number of blades used, and (3) the rotating speed were investigated. Among the five impeller designs, the results obtained suggested that impellers A and C designs should be adopted if higher head is required. Impellers A and C therefore were selected for the flow in between their blades to be measured using Laser Doppler Anemometer (LDA), so as to have a better understanding of the flow physics with respect to the design parameters.

  11. Low-power photolytically pumped lasers: Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Messing, I.; Lorents, D.C.; Eckstrom, D.J.

    1987-08-01

    We have carried out an extensive series of measurements of the time-resolved Xe/sub 2/* emission spectra following optical pumping by a short-pulse F/sub 2/ laser at 157.6 nm. Most measurements were performed using a gated Optical Multichannel Analyzer detector; we also made measurements using a scanning monochromator fitted with a photomultiplier and using a boxcar integrator for time resolution. The two sets of results agree well and show that both the singlet and triplet emission bands are broader than expected and have center wavelengths closer together than expected. Measurements were performed both at room temperature and at elevated (140/sup 0/C) and reduced (-27/sup 0/C) temperatures. The broad bandwidth of the individual spectral bands was unexpected and conflicted with a previous spectral measurement using optical pumping by the Xe* resonance line from a microwave discharge lamp. Therefore, we also performed a series of spectral measurements using this type of optical pumping. We achieved good agreement with some previous results in the literature, but not with the result in question. We conclude that the present results are reliable. The results presented in this report provide the first definitive measurement of the individual excimer emissions from each of the Xe/sub 2/(0/sub u//sup +/) and Xe/sub 2/(1/sub u/) states. From these measurements and the known ground state potential, we derived a 1/sub u/ potential that reproduces the emission band very well. However, the 1/sub u/ potential is in substantial disagreement with the recent 1/sub u/ potential derived by the Toronto group. 13 refs., 32 figs., 3 tabs.

  12. Nd:GGG disk laser with multipoint spatially periodic optical pumping

    Science.gov (United States)

    Guryev, D. A.; Nikolaev, D. A.; Tsvetkov, V. B.

    2016-04-01

    The results of the study of the output laser beam spatial characteristics of the Nd:Gd3Ga5O12 (Nd:GGG) disk laser with multipoint spatially periodic diode-pumping are presented. The presence of the optical coupling between the TEM00 lasing channels is demonstrated. The phase-locking of channels was realized due to partial overlapping of laser beams inside the pumped areas of the active element disk.

  13. Continuous-wave operation of a room-temperature Tm: YAP-pumped Ho: YAG laser

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    We report a continuous-wave (CW) 2.1-μm Ho:YAG laser operating at room temperature pumped by a diode-pumped 1.94-?m Tm:YAP laser.The maximum output power of 1.5 W is obtained from Ho:YAG laser,corresponding to Tm-to-Ho slope efficiency of 17.9% and diode-to-He conversion efficiency of 5.6%.

  14. Diode-pumped, All-solid-state Cr: LiSGaF Laser

    Institute of Scientific and Technical Information of China (English)

    DAI Jianming; ZHANG Lizhe; ZHANG Weili; CHAI Lu; WANG Yong; XING Qirong; WANG Qingyue

    2000-01-01

    A compact and efficient CW Cr: LiSGaF laser pumped by two 670 nm laser diodes was reported. Average power as high as 125 mW was generated with a absorbed pump power of 800 mW. The slope efficiency was 17.2%, and the threshold was 72 mW. The tunability of the laser in detail was investigated and a tuning range of 100 nm from 790 to 890 nm was obtained.

  15. Continuously tunable solution-processed organic semiconductor DFB lasers pumped by laser diode

    DEFF Research Database (Denmark)

    Klinkhammer, Sönke; Liu, Xin; Huska, Klaus

    2012-01-01

    The fabrication and characterization of continuously tunable, solution-processed distributed feedback (DFB) lasers in the visible regime is reported. Continuous thin film thickness gradients were achieved by means of horizontal dipping of several conjugated polymer and blended small molecule...... solutions on cm-scale surface gratings of different periods. We report optically pumped continuously tunable laser emission of 13 nm in the blue, 16 nm in the green and 19 nm in the red spectral region on a single chip respectively. Tuning behavior can be described with the Bragg-equation and the measured...

  16. Diode Laser Pumped Alkali Vapor Lasers with Exciplex-Assisted Absorption

    Science.gov (United States)

    2013-05-14

    Torr of Helium in the discharge is similar to the DPAL systems, o 13 = 7.2 x 10’ 13 cm2. The state degeneracy’s of, g3 =7, g2 =3 and g1 = 5 are more...krypton and helium was used . These gases were further purified by passage through molecular sieve traps that were immersed in liquid nitrogen. The total...was produced from a dye laser pumped by the 308 nm output of an excimer laser running at 10 Hz (Lambda Physik EMG201/FL3002). The linewidth was

  17. 5 (Upgradable to 25 keV) Free Electron Laser (FEL) Facility

    CERN Document Server

    York, R C

    2013-01-01

    A Free Electron Laser (FEL) facility utilizing a recirculated Superconducting Radio Frequency (SRF) linear accelerator (linac) provides the opportunity to achieve about five times greater photon energy than an unrecirculated linac of similar cost. > A 4 GeV SRF, cw, electron linac can be used to drive an FEL producing 5 keV photons. The SLAC National Accelerator Laboratory, a Department of Energy (DOE) Basic Energy Sciences (BES) laboratory, proposes to utilize a 4 GeV unrecirculated, SRF, linac in a segment of existing linac tunnel. > For an initial investment similar to that of the proposed SLAC strategy, a recirculated SRF linac system could deliver the 4 GeV electrons for photon energies of 5 keV and provide an upgrade path to photon energies of 25 keV. > Further support amounting to about a third of the initial investment would provide upgrade funds for additional SRF linac and cryogenic capacity sufficient to provide electron energies appropriate for 25 keV photons matching the European XFEL.

  18. Development of laser induced breakdown spectroscopy for studying erosion, deposition, and fuel retention in ASDEX Upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Paris, Peeter; Piip, Kaarel [Institute of Physics, University of Tartu, Tartu (Estonia); Hakola, Antti [VTT Technical Research Centre of Finland, Espoo (Finland); Laan, Matti, E-mail: matti.laan@ut.ee [Institute of Physics, University of Tartu, Tartu (Estonia); Aints, Märt [Institute of Physics, University of Tartu, Tartu (Estonia); Koivuranta, Seppo; Likonen, Jari [VTT Technical Research Centre of Finland, Espoo (Finland); Lissovski, Aleksandr [Institute of Physics, University of Tartu, Tartu (Estonia); Mayer, Matej [Max-Planck-Institut für Plasmaphysik, Garching (Germany); Neu, Rudolf [Max-Planck-Institut für Plasmaphysik, Garching (Germany); Technische Universität München, Fachgebt Plasma-Material-Wechelwirkung, Garching (Germany); Rohde, Volker; Sugiyama, Kazuyoshi [Max-Planck-Institut für Plasmaphysik, Garching (Germany)

    2015-10-15

    Highlights: • LIBS development for in situ monitoring of first walls of fusion reactors. • Testing of samples extracted from the divertor tiles of ASDEX Upgrade. • Reliable detection of deuterium depth profiles. • A method of LIBS data processing which allows to find the elemental depth profiles. • Comparison of LIBS results with those of other surface characterization methods. - Abstract: The paper deals with the development of laser induced breakdown spectroscopy (LIBS) into an in situ method for studying erosion/deposition processes at the first walls of fusion reactors. To this end, samples extracted from the divertor tiles of ASDEX Upgrade after the 2009 plasma operations were analyzed using LIBS for their composition and the results were compared with other post mortem deposition data. Quantitative depth profiles for the elemental concentrations were extracted from LIBS spectra by applying a novel data processing method. In addition, both multiline and multispot averaging procedures were applied to reduce fluctuations in the data. The LIBS concentration profiles matched qualitatively with those given by secondary ion mass spectrometry and quantitatively with the ion-beam data. The deuterium content of the samples could be reliably determined if the surface densities were >10{sup 17} at/cm{sup 2}.

  19. MAGNETIC MODELING VS MEASUREMENTS OF THE DIPOLES FOR THE JLAB 10 KW FREE ELECTRON LASER UPGRADE

    Energy Technology Data Exchange (ETDEWEB)

    David Douglas; Robin Wines; Tom Hiatt; George Biallas; Kenneth Baggett; T.J. Schultheiss; V.A. Christina; J.W. Rathke; A. Smirnov; D. Newsham; Y. Luo; D. Yu

    2003-05-01

    Magnetic measurements of the six families of dipoles for the infrared Free Electron Laser Upgrade at the Thomas Jefferson National Accelerator Facility (Jlab) are compared to the magnetic models on which their design is based. The magnets were designed in parallel by three organizations. They used ANSYS, Radia or Opera 3D as a 3D magnetic modeling program. Comparison of the discrepancies between model and magnet measurement is presented along with analysis of their potential causes. These dipoles operate in two field ranges. The Injector/ Extractor Dipoles operate around 0.05 T and the Arc Dipoles and Optical Chicane Dipoles operate between 0.22 to 0.71 T. All magnets are required to meet core field and field integral flatness to parts in 104 over their good field region.

  20. Dynamics of an erbium-doped fiber laser with pump modulation: theory and experiment

    Science.gov (United States)

    Pisarchik, Alexander N.; Kir'yanov, Alexander V.; Barmenkov, Yuri O.; Jaimes-Reátegui, Rider

    2005-10-01

    We study in detail the complex dynamics of an erbium-doped fiber laser that has been subjected to harmonic modulation of a diode pump laser. We introduce a novel laser model that describes perfectly all experimentally observed features. The model is generalized to a nonlinear oscillator. The coexistence of different periodic and chaotic regimes and their relation to subharmonics and higher harmonics of the relaxation oscillation frequency of the laser are demonstrated with codimensional-one and codimensional-two bifurcation diagrams in parameter space of the modulation frequency and amplitude. The phase difference between the laser response and the pump modulation is also investigated.

  1. Investigation of diode-laser pumped thulium-doped fluoride lasers; Investigacao de lasers de floureto dopados com tulio e bombeados por diodo-laser

    Energy Technology Data Exchange (ETDEWEB)

    Matos, Paulo Sergio Fabris de

    2006-07-01

    Tunable lasers emitting around 2.3 mum region are important in many areas, like gas detection, remote sensing and medical applications. Thulium has a large emission spectra around 2.3 mum with demonstrated tuning range of 2.2-2.45 mum using the YLF host. For efficient pump absorption, a high concentration sensitizer like ytterbium can be used. We demonstrate quasi-cw operation of the Yb:Tm:YLF laser, pumped at 960 nm with a 20 W diode bar achieving the highest output power reported so far of 620 mW. Simultaneous pumping of the 2.3 mm Yb:Tm:YLF laser at 685 nm and 960 nm is demonstrated, showing higher slope efficiency than 960 nm alone. Numerical simulations and analytical models show the best ratio of pump power between both wavelengths. (author)

  2. Designing a Broadband Pump for High-Quality Micro-Lasers via Modified Net Radiation Method

    CERN Document Server

    Nechayev, Sergey; Baldo, Marc A; Rotschild, Carmel

    2016-01-01

    High-quality micro-lasers are key ingredients in non-linear optics, communication, sensing and low-threshold solar-pumped lasers. However, such micro-lasers exhibit negligible absorption of free-space broadband pump light. Recently, this limitation was lifted by cascade energy transfer, in which the absorption and quality factor are modulated with wavelength, enabling non-resonant pumping of high-quality micro-lasers and solar-pumped laser to operate at record low solar concentration. Here, we present a generic theoretical framework for modeling the absorption, emission and energy transfer of incoherent radiation between cascade sensitizer and laser gain media. Our model is based on linear equations of the modified net radiation method and is therefore robust, fast converging and has low complexity. We apply this formalism to compute the optimal parameters of low-threshold solar-pumped lasers. It is revealed that the interplay between the absorption and self-absorption of such lasers defines the optimal pump ...

  3. Comparison of the treatment of vascular lesions with the copper-vapor laser and flashlamp-pumped dye laser

    Science.gov (United States)

    Flock, Stephen T.; Waner, Milton; McGrew, Ben; Colvin, G. B.; Montague, Donna

    1992-08-01

    Vascular lesions such as port-wine stains and telangiectases are sometimes treated with carbon-dioxide lasers, argon lasers or argon-pumped dye lasers; however these lasers are non- specific in their thermal effect on tissues and as a result often cause significant scarring. Recently, evidence has accumulated that the flashlamp-pumped dye (585 nm) and copper- vapor (578 nm) lasers, which produce pulsed light that is efficiently absorbed by hemoglobin, are more selective in coagulating abnormal vascular tissue and as a result give a superior clinical result. It is not yet clear what the most important physical and biological mechanisms are during the light-tissue interaction mediated by these two lasers. The post-treatment sequence of events is different for tissue irradiated by each laser; most significantly, the flashlamp-pumped dye laser causes significant transient purpura, whereas the copper vapor laser causes blanching and eschar formation. The clinical outcome, that is regression of the lesion, is equally successful with either laser although some evidence has accumulated showing that the flashlamp-pumped dye laser is best suited to the treatment of small vessel disease while the copper-vapor laser is better for the treatment of large vessel disease. In this paper, we will discuss our observations of the treatment of vascular lesions on humans with the copper-vapor and flashlamp-pumped dye lasers using empirically derived efficacious treatment parameters. Mathematical models of light and heat propagation and in vivo experiments involving mice ears and rat skin flaps will be used to elucidate what we feel are the important underlying mechanisms of this vascular lesion laser therapy.

  4. 28W average power hydrocarbon-free rubidium diode pumped alkali laser.

    Science.gov (United States)

    Zweiback, Jason; Krupke, William F

    2010-01-18

    We present experimental results for a high-power diode pumped hydrocarbon-free rubidium laser with a scalable architecture. The laser consists of a liquid cooled, copper waveguide which serves to both guide the pump light and to provide a thermally conductive surface near the gain volume to remove heat. A laser diode stack, with a linewidth narrowed to approximately 0.35 nm with volume bragg gratings, is used to pump the cell. We have achieved 24W average power output using 4 atmospheres of naturally occurring helium ((4)He) as the buffer gas and 28W using 2.8 atmospheres of (3)He.

  5. A Laser-Diode-Pumped Widely Tunable Single-Longitude-Mode Tm:YAP Laser at Room Temperature

    Institute of Scientific and Technical Information of China (English)

    LI Yu-Feng; JU You-Lun; YAO Bao-Quan; WANG Yue-Zhu; Sergii Ubizskii

    2007-01-01

    A laser-diode-pumped widely tunable single-longitude-mode Tm:YAP laser in 2μm eye-safe region is built. Continuous tunable range from 1899nm to 2025nm is achieved with the maximum laser output power of 225 m W at 1989nm. In addition, the Tm:YAP laser operating under multimode and single-mode conditions is discussed.

  6. Diode laser pumped solid state laser. Part IV. ; Noise analysis. Handotai laser reiki kotai laser. 4. ; Noise kaiseki

    Energy Technology Data Exchange (ETDEWEB)

    Sakurai, H.; Seno, T.; Tanabe, Y. (Asahi Glass Co. Ltd., Tokyo (Japan))

    1991-06-10

    Concerning the second harmonic generation(SHG) of diode laser pumped solid state laser using a nonlinear optical material, the researches are carried out to pracitically apply to the optical pickup. Therefore, the reduction of output optical noise has become the important researching subject. The theoretical and experimental analyses of noise generating mechanism were carried out for the system in which Nd;YAG as the laser diode and KTP (KTiOPO {sub 4}) as the nonlinear optical crystal were used. The following findings for the noise generating mechanism could be obtained: The competitive interaction between the polarization modes was dominant noise mechanism in the high frequency range from 1 to 20MHz and the noise could be removed sufficiently by using the QWP(quarter wave plate). On the other hand, the noise observed in the low frequency range from 100 to 200kHz depended on the resonance length, agreed qualitatively with the theoretical analysis of the noise to the competitive longitudinal modes and agreed quantitatively with the noise generating frequency range. 10 refs., 13 figs., 1 tab.

  7. Modeling of static and flowing-gas diode pumped alkali lasers

    Science.gov (United States)

    Barmashenko, Boris D.; Auslender, Ilya; Yacoby, Eyal; Waichman, Karol; Sadot, Oren; Rosenwaks, Salman

    2016-03-01

    Modeling of static and flowing-gas subsonic, transonic and supersonic Cs and K Ti:Sapphire and diode pumped alkali lasers (DPALs) is reported. A simple optical model applied to the static K and Cs lasers shows good agreement between the calculated and measured dependence of the laser power on the incident pump power. The model reproduces the observed threshold pump power in K DPAL which is much higher than that predicted by standard models of the DPAL. Scaling up flowing-gas DPALs to megawatt class power is studied using accurate three-dimensional computational fluid dynamics model, taking into account the effects of temperature rise and losses of alkali atoms due to ionization. Both the maximum achievable power and laser beam quality are estimated for Cs and K lasers. The performance of subsonic and, in particular, supersonic DPALs is compared with that of transonic, where supersonic nozzle and diffuser are spared and high power mechanical pump (needed for recovery of the gas total pressure which strongly drops in the diffuser), is not required for continuous closed cycle operation. For pumping by beams of the same rectangular cross section, comparison between end-pumping and transverse-pumping shows that the output power is not affected by the pump geometry, however, the intensity of the output laser beam in the case of transverse-pumped DPALs is strongly non-uniform in the laser beam cross section resulting in higher brightness and better beam quality in the far field for the end-pumping geometry where the intensity of the output beam is uniform.

  8. Diffractive Combiner of Single-Mode Pump Laser-Diode Beams

    Science.gov (United States)

    Liu, Duncan; Wilson, Daniel; Qiu, Yueming; Forouhar, Siamak

    2007-01-01

    An optical beam combiner now under development would make it possible to use the outputs of multiple single-mode laser diodes to pump a neodymium: yttrium aluminum garnet (Nd:YAG) nonplanar ring oscillator (NPRO) laser while ensuring that the laser operates at only a single desired frequency. Heretofore, an Nd:YAG NPRO like the present one has been pumped by a single multimode laser-diode beam delivered via an optical fiber. It would be desirable to use multiple pump laser diodes to increase reliability beyond that obtainable from a single pump laser diode. However, as explained below, simplistically coupling multiple multimode laser-diode beams through a fiber-optic combiner would entail a significant reduction in coupling efficiency, and lasing would occur at one or more other frequencies in addition to the single desired frequency. Figure 1 schematically illustrates the principle of operation of a laser-diode-pumped Nd:YAG NPRO. The laser beam path is confined in a Nd:YAG crystal by means of total internal reflections on the three back facets and a partial-reflection coating on the front facet. The wavelength of the pump beam - 808 nm - is the wavelength most strongly absorbed by the Nd:YAG crystal. The crystal can lase at a wavelength of either 1,064 nm or 1,319 nm - which one depending on the optical coating on the front facet. A thermal lens effect induced by the pump beam enables stable lasing in the lowest-order transverse electromagnetic mode (the TEM00 mode). The frequency of this laser is very stable because of the mechanical stability of the laser crystal and the unidirectional nature of the lasing. The unidirectionality is a result of the combined effects of (1) a Faraday rotation induced by an externally applied magnetic field and (2) polarization associated with non-normal incidence and reflection on the front facet.

  9. Efficient fiber-laser-pumped Ho:YLF oscillator and amplifier utilizing the transmitted pump power of the oscillator

    CSIR Research Space (South Africa)

    Strauss, HJ

    2009-06-01

    Full Text Available In this paper, researchers have demonstrated that a Ho:YLF oscillator and amplifier system can be designed in a compact setup where the pump power from an unpolarized fibre laser utilized efficiently. The system produced more than 20 mJ energy per...

  10. New class of compact diode pumped sub 10 fs lasers for biomedical applications

    DEFF Research Database (Denmark)

    Le, T.; Mueller, A.; Sumpf, B.;

    2016-01-01

    -laser. In this work we present an alternative method by deploying frequency-doubled IR diodes with good beam qualities to pump fs-lasers. The revolutionary approach allows choosing any pump wavelengths in the green region and avoids complicated relay optics for the diodes. For the first time we show results...... of a diode-pumped 10 fs-laser and how a single diode setup can be integrated into a 30 x 30 cm(2) fs-laser system generating sub 20 fs laser pulses with output power towards half a Watt. This technology paves the way for a new class of very compact and cost-efficient fs-lasers for life science and industrial...... applications....

  11. Method for optical pumping of thin laser media at high average power

    Energy Technology Data Exchange (ETDEWEB)

    Zapata, Luis E. (Livermore, CA); Beach, Raymond J. (Livermore, CA); Honea, Eric C. (Sunol, CA); Payne, Stephen A. (Castro Valley, CA)

    2004-07-13

    A thin, planar laser material is bonded to a light guide of an index-matched material forming a composite disk. Diode array or other pump light is introduced into the composite disk through the edges of the disk. Pump light trapped within the composite disk depletes as it multi-passes the laser medium before reaching an opposing edge of the disk. The resulting compound optical structure efficiently delivers concentrated pump light and to a laser medium of minimum thickness. The external face of the laser medium is used for cooling. A high performance cooler attached to the external face of the laser medium rejects heat. Laser beam extraction is parallel to the heat flux to minimize optical distortions.

  12. Diode-pumped tunable laser with dual Cri:LiSAF rods

    Institute of Scientific and Technical Information of China (English)

    Xie Guo-Qiang; Wang Tao; Zhu He-Yuan; Qian Lie-Jia

    2006-01-01

    We propose and demonstrate a simple approach to lower the thermal quenching effect and improve the output power of Cr:LiSAF lasers, which is accomplished by employing two laser rods. The resonator contains two laser rods and is designed by using two "X" folding cavities in cascade. A tunable laser output of ~ 180 mW has been achieved with the pump of single-striped laser diodes. Compared with lasers using single gain rod, the laser with dual rods shows less severe thermal effect and increases the output by more than two times.

  13. Optimal main pulse angle for different preplasma conditions in transient collisionally pumped x-ray lasers.

    Science.gov (United States)

    Ursescu, Daniel; Zielbauer, Bernhard; Kuehl, Thomas; Neumayer, Paul; Pert, Geoff

    2007-04-01

    The effects of the incidence angle of the main pump (MP) pulse in non-normal pumping geometry and the influence of the MP duration are investigated experimentally and theoretically for a transient collisionally pumped (TCE) x-ray laser in Ni-like Zr at 45 degrees and 72 degrees incidence angle on the target. The way they transfer to the x-ray laser output depends on the preplasma conditions, most notably on the average ionization distribution at the arrival of the MP. Moreover, contrary to previous grazing incidence pumping results, it is found that the shortest attainable MP maximizes the output. Modeling of the experimental results is performed with EHYBRID code. The results are important for scaling high repetition-rate non-normal incidence pumped lasers to sub- 10nm wavelengths.

  14. Ultra low-energy switch based on a cavity soliton laser with pump modulation

    Science.gov (United States)

    Eslami, M.; Gandomani, S. Z.; Prati, F.; Tajalli, H.; Kheradmand, R.

    2017-01-01

    We study the effects of pump modulation in a cavity soliton laser consisting of a vertical cavity surface emitting laser with an intra-cavity saturable absorber. We show that a drifting soliton experiences enhanced mobility features by modulating the pump at the resonance frequency, and the effects are even larger below resonance. In particular, pump modulation reduces the rest time of the soliton in the initial stage of the motion and it increases its drift velocity in this regime. Moreover, pump modulation allows a decrease in the switching energy of the soliton to an amount equal to 36 photons. These results indicate that pump modulation is a promising way for the use of a cavity soliton laser as a fast optical buffer and an ultra low-energy optical switch.

  15. Nd: YAG Laser-Pumped Raman-Shifted Methane Laser as an Eye-safe Laser Rangefmder

    Directory of Open Access Journals (Sweden)

    Jai Paul Dudeja

    1989-07-01

    Full Text Available In this article, a feasibility study of the design and performance of a laser rangefinder emitting at an eye-safe wavelength of 1.54 micron, is reported. It is a Raman-shifted laser where an Nd:YAG laser emitting at a wavelength of 1.06 micron is used as pumping source that is incident on a Raman cell containing methane gas at a very high pressure, rsulting in the Stokes radiation at 1.54 micron. Conversion efficiencies as higb as 40 per cent have been reported so far by some workers and continued efforts are on to increase this value close tothe theoretical Qmits. A comparative performance of this laser, proposed as a futuristic military rangefinder, is studied vis-a-vis commonly used Nd:YAG lasers as well as more recent rangefinders using CO2 lasers. A comparison of this laser emitting at 1.54 micron,with Er : glass laser emitting at the same wavelength, is also discussed.

  16. 1-kilowatt CW all-fiber laser oscillator pumped with wavelength-beam-combined diode stacks.

    Science.gov (United States)

    Xiao, Y; Brunet, F; Kanskar, M; Faucher, M; Wetter, A; Holehouse, N

    2012-01-30

    We have demonstrated a monolithic cladding-pumped ytterbium-doped single all-fiber laser oscillator generating 1 kW of CW signal power at 1080 nm with 71% slope efficiency and near diffraction-limited beam quality. Fiber components were highly integrated on "spliceless" passive fibers to promote laser efficiency and alleviate non-linear effects. The laser was pumped through a 7:1 pump combiner with seven 200-W 91x nm fiber-pigtailed wavelength-beam-combined diode-stack modules. The signal power of such a single all-fiber laser oscillator showed no evidence of roll-over, and the highest output was limited only by available pump power.

  17. Heat generation and thermo-mechanical effect modeling in longitudinally diode-pumped solid state lasers

    Science.gov (United States)

    Lakhdari, Fouad; Osmani, Ismahen; Tabet, Saida

    2015-09-01

    Thermal management in solid state laser is a challenge to the high power laser industry's ability to provide continued improvements in device and system performance. In this work an investigation of heat generation and thermo-mechanical effect in a high-power Nd:YAG and Yb:YAG cylindrical-type solid state laser pumped longitudinally with different power by fibre coupled laser diode is carried out by numerical simulation based on the finite element method (FEM). Impact of the dopant concentration on the power conversion efficiency is included in the simulation. The distribution of the temperature inside the lasing material is resolute according to the thermal conductivity. The thermo-mechanical effect is explored as a function of pump power in order to determine the maximum pumping power allowed to prevent the crystal's fracture. The presented simulations are in broad agreement with analytical solutions; provided that the boundary condition of the pump induced heat generation is accurately modelled.

  18. High Speed Pump-Probe Apparatus for Observation of Transitional Effects in Ultrafast Laser Micromachining Processes

    Directory of Open Access Journals (Sweden)

    Ilya Alexeev

    2015-12-01

    Full Text Available A pump-probe experimental approach has been shown to be a very efficient tool for the observation and analysis of various laser matter interaction effects. In those setups, synchronized laser pulses are used to create an event (pump and to simultaneously observe it (probe. In general, the physical effects that can be investigated with such an apparatus are restricted by the temporal resolution of the probe pulse and the observation window. The latter can be greatly extended by adjusting the pump-probe time delay under the assumption that the interaction process remains fairly reproducible. Unfortunately, this assumption becomes invalid in the case of high-repetition-rate ultrafast laser material processing, where the irradiation history strongly affects the ongoing interaction process. In this contribution, the authors present an extension of the pump-probe setup that allows to investigate transitional and dynamic effects present during ultrafast laser machining performed at high pulse repetition frequencies.

  19. Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

    Indian Academy of Sciences (India)

    Pranab K Mukhopadhyay; K Ranganathan; Jogy George; S K Sharma; T P S Nathan

    2002-04-01

    The dependence of the beam propagation factor (2 parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the 2 parameter is related to the absorbed pump power through two parameters ( and ) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of 2 parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd3+ - doped GdVO4 crystal and the values of and parameters were estimated from the experimentally measured data points.

  20. High-efficiency resonantly pumped 1550-nm fiber-based laser transmitter Project

    Data.gov (United States)

    National Aeronautics and Space Administration — nLight proposes the development of high efficiency, high average power 1550-nm laser transmitter system that is based on Er-doped fiber amplifier resonantly pumped...

  1. High energy diode-pumped solid-state laser development at the Central Laser Facility

    Science.gov (United States)

    Mason, Paul D.; Banerjee, Saumyabrata; Ertel, Klaus; Phillips, P. Jonathan; Butcher, Thomas; Smith, Jodie; De Vido, Mariastefania; Chekhlov, Oleg; Hernandez-Gomez, Cristina; Edwards, Chris; Collier, John

    2016-04-01

    In this paper we review the development of high energy, nanosecond pulsed diode-pumped solid state lasers within the Central Laser Facility (CLF) based on cryogenic gas cooled multi-slab ceramic Yb:YAG amplifier technology. To date two 10J-scale systems, the DiPOLE prototype amplifier and an improved DIPOLE10 system, have been developed, and most recently a larger scale system, DiPOLE100, designed to produce 100 J pulses at up to 10 Hz. These systems have demonstrated amplification of 10 ns duration pulses at 1030 nm to energies in excess of 10 J at 10 Hz pulse repetition rate, and over 100 J at 1 Hz, with optical-to-optical conversion efficiencies of up to 27%. We present an overview of the cryo-amplifier concept and compare the design features of these three systems, including details of the amplifier designs, gain media, diode pump lasers and the cryogenic gas cooling systems. The most recent performance results from the three systems are presented along with future plans for high energy DPSSL development within the CLF.

  2. A new LD-pumped single frequency micro-chip green la-ser

    Institute of Scientific and Technical Information of China (English)

    LIN Hai-feng; CHEN Jian-lin; YANG Shang-gong

    2009-01-01

    A novel LD-pumped single-frequency micro-chip green laser is presented By using the combination of short cavity and Loyt filter formed by Rochon prism and KTP crystal, a stable single frequency green laser is obtained with 60 mW output at 500 mWLD-pump. The optical-to-optical conversion efficiency is about 12%. The optical contact between components of the laser is adopted. This laser has the advantages of a compact structure and a low cost.

  3. High-Power Continuous-Wave Directly-Diode-Pumped Fiber Raman Lasers

    Directory of Open Access Journals (Sweden)

    Tianfu Yao

    2015-11-01

    Full Text Available We describe novel fiber Raman lasers pumped directly by spectrally combined high power multimode laser diodes at 975 nm and emitting at 1019 nm. With a commercial multimode graded-index fiber, we reached 20 W of laser output power with a record slope efficiency of 80%. With an in-house double-clad fiber, the beam quality improved to M2 = 1.9, albeit with lower output power and slope efficiency due to higher fiber loss. We believe this is the first publication of a fiber Raman laser cladding-pumped directly by diodes.

  4. Pump-probe imaging of laser-induced periodic surface structures after ultrafast irradiation of Si

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, Ryan D. [Applied Physics Program, University of Michigan, Ann Arbor, Michigan 48109 (United States); Torralva, Ben [Department of Atmospheric, Oceanic and Space Sciences, University of Michigan, Ann Arbor, Michigan 48109 (United States); Adams, David P. [Sandia National Laboratories, Albuquerque, New Mexico 87123 (United States); Yalisove, Steven M. [Department of Materials Science and Engineering, University of Michigan, Ann Arbor, Michigan 48109 (United States)

    2013-09-30

    Ultrafast pump-probe microscopy has been used to investigate laser-induced periodic surface structure (LIPSS) formation on polished Si surfaces. A crater forms on the surface after irradiation by a 150 fs laser pulse, and a second, subsequent pulse forms LIPSS within the crater. Sequentially delayed images show that LIPSS with a periodicity slightly less than the fundamental laser wavelength of 780 nm appear on Si surfaces ∼50 ps after arrival of the second pump laser pulse, well after the onset of melting. LIPSS are observed on the same timescale as material removal, suggesting that their formation involves material ejection.

  5. Pump-probe imaging of laser-induced periodic surface structures after ultrafast irradiation of Si

    Science.gov (United States)

    Murphy, Ryan D.; Torralva, Ben; Adams, David P.; Yalisove, Steven M.

    2013-09-01

    Ultrafast pump-probe microscopy has been used to investigate laser-induced periodic surface structure (LIPSS) formation on polished Si surfaces. A crater forms on the surface after irradiation by a 150 fs laser pulse, and a second, subsequent pulse forms LIPSS within the crater. Sequentially delayed images show that LIPSS with a periodicity slightly less than the fundamental laser wavelength of 780 nm appear on Si surfaces ˜50 ps after arrival of the second pump laser pulse, well after the onset of melting. LIPSS are observed on the same timescale as material removal, suggesting that their formation involves material ejection.

  6. Diode-pumped Nd:GAGG-LBO laser at 531 nm

    Science.gov (United States)

    Zou, J.; Chu, H.; Wang, L. R.

    2012-03-01

    We report a green laser at 531 nm generation by intracavity frequency doubling of a continuous wave (cw) laser operation of a 1062 nm Nd:GAGG laser under in-band diode pumping at 808 nm. A LiB3O5 (LBO) crystal, cut for critical type I phase matching at room temperature is used for second harmonic generation of the laser. At an incident pump power of 18.5 W, as high as 933 mW of cw output power at 531 nm is achieved. The fluctuation of the green output power was better than 3.5% in the given 4 h.

  7. Diode Stack End-Pumped Nd:GdVO4 Continuous Wave Slab Laser

    Institute of Scientific and Technical Information of China (English)

    ZHANG Heng-Li; ZHANG Huai-Jin; LI Dai-Jun; WANG Ji-Yang; SHI Peng; Haas Rüdiger; LI Hong-Xia; JIANG Min-Hua; DU Keming

    2005-01-01

    @@ We report a diode stack end-pumped Nd:GdVO4 slab laser with a near-diffraction-limited beam. The output power of 45.8 W at 1064nm is obtained under the pumping power of 147W, with the optical-optical conversion efficiency of 31.2%, and the slope efficiency is 39.6%.

  8. Multi-pass 1.9 um Tm:YLF slab laser pump source

    CSIR Research Space (South Africa)

    Strauss, HJ

    2010-09-01

    Full Text Available A novel multi-pass Tm: YLF laser was demonstrated with an improvement in efficiency, footprint and cost over a two diode stack pumped, single pass system. 100 W of output power from 261 W of incident diode pump power with a slope efficiency of 44...

  9. Microsecond pulsed optical parametric oscillator pumped by a Q-switched fiber laser

    NARCIS (Netherlands)

    Klein, M.E.; Adel, P.; Auerbach, M.; Fallnich, C.; Gross, P.; Boller, Klaus J.

    2003-01-01

    We report on what is to our knowledge the first optical parametric oscillator (OPO) pumped by microsecond pulses from a wavelength-tunable solid-state laser. The singly resonant OPO (SRO) is based on a periodically poled LiNbO3 crystal and pumped with 2.1-ms-long pulses from an actively Q-switched Y

  10. 5kW GTWave fiber amplifier directly pumped by commercial 976nm laser diodes.

    Science.gov (United States)

    Zhan, Huan; Liu, Qinyong; Wang, Yuying; Ke, Weiwei; Ni, Li; Wang, Xiaolong; Peng, Kun; Gao, Cong; Li, Yuwei; Lin, Honghuan; Wang, Jianjun; Jing, Feng; Lin, Aoxiang

    2016-11-28

    With home-made fiber perform and special fiber drawing & coating technique, a new-type of (3 + 1) GTWave fiber theoretically designed for bi-directional pump method, was successfully fabricated and justified of integrating multi-kW pump energy from commercial 976nm laser diodes. This (3 + 1) GTWave fiber amplifier demonstrated uniform absorption of pump light and easy thermal management characteristics along the whole fiber length. This amplifier is capable of simultaneously aggregating 5.19kW pump power at 976nm and finally generating 5.07kW laser output at 1066.5nm with an optical-to-optical efficiency of 74.5%, the first publically-reported multi-kW GTWave fiber directly pumped with commercial 976nm laser diodes to the best of our knowledge. No power roll-over was found at 5kW level and further power scaling can be expected with more pump power. The results indicate that GTWave fiber is a competitive integrated fiber device to collect enough pump energy from low-cost commercial laser diodes for multi-kW fiber laser development.

  11. High-efficiency Tm-doped yttrium aluminum garnet laser pumped with a wavelength-locked laser diode

    Science.gov (United States)

    Huang, H. Z.; Huang, J. H.; Liu, H. G.; Dai, S. T.; Weng, W.; Zheng, H.; Ge, Y.; Li, J. H.; Deng, J.; Yang, X.; Lin, W. X.

    2016-09-01

    We first demonstrate a high-efficiency composite Tm-doped yttrium aluminum garnet laser end-pumped with a narrow-linewidth laser diode, which was locked at a wavelength of 784.9 nm with volume Bragg gratings. The locked pump wavelength was experimentally determined by the excitation peak, which was also the absorption peak of a 3.5 at.% Tm:YAG crystal around 785 nm, for the improvement of laser efficiency under high-intensity pumping. Under an absorbed pump power of 24.64 W, a maximum output power of 11.12 W at 2018 nm was obtained, corresponding to an optical to optical conversion efficiency of 45.1% and a slope efficiency of 52.4%.

  12. Laser action at 16. mu. by optical pumping of CO/sub 2/ with an HF laser

    Energy Technology Data Exchange (ETDEWEB)

    Kuntsevich, B.F.; Stepanov, B.I.; Trushin, S.A.; Churakov, V.V.

    1977-08-01

    Calculations are presented on the threshold properties of a CO/sub 2/ laser that is optically pumped by the P/sub 1/(7) line of a HF laser. The dependence on the CO/sub 2/ pressure is considered.(AIP)

  13. Core temperature in super-Gaussian pumped air-clad photonic crystal fiber lasers compared with double-clad fiber lasers

    Indian Academy of Sciences (India)

    P Elahi; H Nadgaran; F Kalantarifard

    2007-03-01

    In this paper we investigate the core temperature of air-clad photonic crystal fiber (PCF) lasers pumped by a super-Gaussian (SG) source of order four. The results are compared with conventional double-clad fiber (DCF) lasers pumped by the same super-Gaussian and by top-hat pump profiles.

  14. TEM00 mode Nd:YAG solar laser by side-pumping a grooved rod

    Science.gov (United States)

    Vistas, Cláudia R.; Liang, Dawei; Almeida, Joana; Guillot, Emmanuel

    2016-05-01

    A simple TEM00 mode solar laser system with a grooved Nd:YAG rod pumped through a heliostat-parabolic mirror system is reported here. The radiation coupling capacity of a fused silica tube lens was combined with the multipass pumping ability of a 2 V-shaped cavity to provide efficient side-pumping along a 4.0 mm diameter grooved Nd:YAG single-crystal rod. TEM00 mode solar laser power of 3.4 W was measured by adopting an asymmetric large-mode laser resonant cavity. Record TEM00 mode solar laser collection efficiency of 3.4 W/m2and slope efficiency of 1.9% was achieved, which corresponds to 1.8 and 2.4 times more than the previous TEM00 mode Nd:YAG solar laser using the PROMES-CNRS heliostat-parabolic mirror system, respectively.

  15. Contrast and Intensity upgrades to the Texas Petawatt laser for hadron generation and non-linear QED experiments

    Science.gov (United States)

    Hegelich, Bjorn M.; Arefiev, Alexey; Ditmire, Todd; Donovan, Michael E.; Dyer, Gillis; Gaul, Erhard; Labun, Lance; Luedtke, Scott; Martinez, Mikael; McCarry, Edward; Stark, David; Pomerantz, Ishay; Tiwari, Ganesh; Toncian, Toma

    2015-11-01

    Advances in laser-based hadron generation, especially with respect to particle energy, as well as reaching the new regime of radiation dominated plasmas and non-linear QED, require laser fields of Petavolts per meter that preferably interact with very high density, overcritical plasmas. To achieve these conditions we are upgrading the Texas Petawatt Laser both respect to on-target laser intensity and laser-contrast, aiming to reach intensities of ~ 5x1022 W/cm2 and pulse contrast parameters allowing the interaction with overcritical, yet ultrathin, sub-micron targets. We will report on the planned experiments aimed at ion acceleration, neutron generation and the first experimental measurement of radiation reactions to motivate the chosen upgrade parameters. We will further report on the technical changes to the laser and present first measurements of the achieved intensity and contrast parameters. This work was supported by NNSA cooperative agreement DE-NA0002008, the Defense Advanced Research Projects Agency's PULSE program (12-63-PULSE-FP014), the Air Force Office of Scientific Research (FA9550-14-1-0045) and the National Institute of Health SBIR.

  16. A low timing jitter picosecond microchip laser pumped by pulsed LD

    Science.gov (United States)

    Wang, Sha; Wang, Yan-biao; Feng, Guoying; Zhou, Shou-huan

    2016-07-01

    SESAM passively Q-switched microchip laser is a very promising instrument to replace mode locked lasers to obtain picosecond pulses. The biggest drawback of a passively Q-switched microchip laser is its un-avoided large timing jitter, especially when the pump intensity is low, i.e. at low laser repetition rate range. In order to obtain a low timing jitter passively Q-switched picosecond microchip laser in the whole laser repetition rate range, a 1000 kHz pulsed narrow bandwidth Fiber Bragg Grating (FBG) stablized laser diode was used as the pump source. By tuning the pump intensity, we could control the output laser frequency. In this way, we achieved a very low timing jitter passively Q-switched picosecond laser at 2.13 mW, 111.1 kHz. The relative timing jitter was only 0.0315%, which was around 100 times smaller compared with a cw LD pumped microchip working at hundred kilohertz repetition rate frequency range.

  17. A Polymer Film Dye Laser with Spatially Modulated Emission Controlled by Transversely Distributed Pumping

    Directory of Open Access Journals (Sweden)

    Zurab V. Wardosanidze

    2016-01-01

    Full Text Available Spatial modulation of laser emission controlled by the structure of excitation light field was demonstrated. A dye doped polymer film as an active medium was sandwiched between two laser mirrors forming a laser cell. The pumping was performed by an interference pattern formed with two mutually coherent beams of the second harmonic of a Q-switched Nd:YAG laser (532 nm and located in the plane of the laser cell. The laser emission was observed normally on the plane of the cell. The cross section of the obtained laser emission was modulated in intensity with an interval between maximums depending on the period of the pumping interference pattern. Thus, the emitted light field qualitatively looks like diffraction from an elementary dynamic hologram, that is, a holographic diffraction grating.

  18. Cryogenic Ho:CaF2 laser pumped by Tm:fiber laser

    Science.gov (United States)

    Jelínek, Michal; Kubeček, Václav; Ma, Weiwei; Zhao, Beibei; Jiang, Dapeng; Su, Liangbi

    2016-06-01

    The laser operation in the pulsed as well as continuous-wave regime of a modified-Bridgeman-grown 0.5 at.% Ho:CaF2 crystal at 83 K pumped by a Tm:fiber laser is reported. The maximum output power was 2.37 W at 2060 nm or 1.3 W at 2110 and 2130 nm. Continuous tuning range over 90 nm from 2030 to 2120 nm was achieved using a birefringent filter. The Ho:CaF2 fundamental spectroscopic properties as absorption and fluorescence spectra at 83 and 293 K are also presented.

  19. Blue Up-Conversion Fibre Laser Pumped by a 1120-nm Raman Fibre Laser

    Institute of Scientific and Technical Information of China (English)

    QIN Guan-Shi; HUANG Sheng-Hong; FENG Yan; SHIRAKAWA A.; MUSHA M.; UEDA Ken-ichi

    2005-01-01

    @@ A Tm3+-doped ZrF4-BaF2-LaF3-AlF3-NaF (ZBLAN) fibre up-conversion laser pumped by a 1120-nm Raman fibre laser is demonstrated with blue output power levels up to 116mW. For the output mirror with 80% reflectivity, the slope efficiency is about 15%, the optical-to-optical conversion efficiency is 11%, and the maximum un-saturated output power is 116mW. For 60% reflectivity, the slope efficiency is about 18% and the opticalto-optical conversion efficiency is 12%, whilst the maximum saturated output power is about 80mW due to the existence of photo-degradation effect in Tm3+ doped ZBLAN glass fibre.

  20. Ti : sapphire laser synchronised with femtosecond Yb pump laser via nonlinear pulse coupling in Ti : sapphire active medium

    Science.gov (United States)

    Didenko, N. V.; Konyashchenko, A. V.; Konyashchenko, D. A.; Kostryukov, P. V.; Kuritsyn, I. I.; Lutsenko, A. P.; Mavritskiy, A. O.

    2017-02-01

    A laser system utilising the method of synchronous pumping of a Ti : sapphire laser by a high-power femtosecond Yb3+-doped laser is described. The pulse repetition rate of the Ti : sapphire laser is successfully locked to the repetition rate of the Yb laser for more than 6 hours without the use of any additional electronics. The measured timing jitter is shown to be less than 1 fs. A simple qualitative model addressing the synchronisation mechanism utilising the cross-phase modulation of oscillation and pump pulses within a Ti : sapphire active medium is proposed. Output parameters of the Ti : sapphire laser as functions of its cavity length are discussed in terms of this model.

  1. Basic studies on laser-assisted phacoemulsification using diode-pumped Er:YAG laser

    Science.gov (United States)

    Hausladen, Florian; Wurm, Holger; Stock, Karl

    2016-03-01

    The aim of this study was to determine the potential of a novel diode-pumped Er:YAG laser for phacoemulsification in basic experimental investigations. An appropriate experimental setup was created, including a translation stage for sample movement, a sample holder, a water spray for sample humidification and a surgical microscope with a CCD camera for video documentation. The analysis of the laser cuts and histological sections was done by light microscopy. As samples porcine eye lenses hardened by formalin were used. In ablation experiments with different spot diameters and radiant powers and a constant repetition rate νr = 200 Hz the maximum ablation depths of (4.346 +/- 0.044) mm have reached at (Ø = 480 μm, Φ = 24.15 W) with a maximum extend of thermal damage of (0.165 +/- 0.030) mm. The average ablation efficiency is 0.241 mm3/J. With a spot diameter of 308 μm the maximum ablation depth is (4.238 +/- 0.040) mm at 24.65 W with a mean ablation efficiency of 0.293 mm3/J. The extend of the thermally damaged region is (0.171 +/- 0.024) mm at this laser power. Using a sapphire cylinder with a diameter of 412 μm (length 38.5 mm) in direct tissue contact with water spray for sample humidification the ablation depth reaches (1.017 +/- 0.074) mm at 4.93 W and (1.840 +/- 0.092) mm at 9.87 W with a mean efficiency of 0.261 mm3/J. A thermal damage zone of (0.064 +/-0.024) mm at 9.87 W was measured. Additionally, at this high power, a progressive contamination and destruction of the cylinder end facet was observed. In conclusion, the investigations show that the diode-pumped Er:YAG laser has considerable potential for cataract surgery.

  2. Efficient Diode-Pumped Passively Q-Switched Nd:GdVO4 Lasers

    Institute of Scientific and Technical Information of China (English)

    刘杰; 贾玉磊; 杨济民; 杜鹃; 何京良

    2002-01-01

    An efficient diode-pumped Nd:GdVO4 laser passively Q-switched by a Cr4+ :YAG has been developed as a saturable absorber. A KTP crystal is used for the extra-cavity second-harmonic generation and a BBO crystal for the sum frequency mixing. The green output power is 172mW at incident pump power of 8 W. The ultraviolet (UV) output power is measured to be 20mW at the same pump power. The peak power of the UV laser is 143 W with the pulse repetition rate of 14 kHz and pulse width of 10 ns.

  3. Recent development on high-power tandem-pumped fiber laser

    Science.gov (United States)

    Zhou, Pu; Xiao, Hu; Leng, Jinyong; Zhang, Hanwei; Xu, Jiangmin; Wu, Jian

    2016-11-01

    High power fiber laser is attracting more and more attention due to its advantage in excellent beam quality, high electricto- optical conversion efficiency and compact system configuration. Power scaling of fiber laser is challenged by the brightness of pump source, nonlinear effect, modal instability and so on. Pumping active fiber by using high-brightness fiber laser instead of common laser diode may be the solution for the brightness limitation. In this paper, we will present the recent development of various kinds of high power fiber laser based on tandem pumping scheme. According to the absorption property of Ytterbium-doped fiber, Thulium-doped fiber and Holmium-doped fiber, we have theoretically studied the fiber lasers that operate at 1018 nm, 1178 nm and 1150 nm, respectively in detail. Consequently, according to the numerical results we have optimized the fiber laser system design, and we have achieved (1) 500 watt level 1018nm Ytterbium-doped fiber laser (2) 100 watt level 1150 nm fiber laser and 100 watt level random fiber laser (3) 30 watt 1178 nm Ytterbium-doped fiber laser, 200 watt-level random fiber laser. All of the above-mentioned are the record power for the corresponded type of fiber laser to the best of our knowledge. By using the high-brightness fiber laser operate at 1018 nm, 1178 nm and 1150 nm that we have developed, we have achieved the following high power fiber laser (1) 3.5 kW 1090 nm Ytterbium-doped fiber amplifier (2) 100 watt level Thulium-doped fiber laser and (3) 50 watt level Holmium -doped fiber laser.

  4. New Electronic-Transition Laser Systems. Part 1. Electron Pumped Systems. Part 2. Chemically Pumped Systems

    Science.gov (United States)

    1976-12-01

    laser development . There has not yet been a demonstration of gain in a visible chemical laser systems, and it appears unlikely that practical lasers of this type will be developed in the near future. Substantial progress has been made

  5. High-repetition-rate femtosecond dye amplifier using a laser-diode-pumped neodymium:YAG laser

    Energy Technology Data Exchange (ETDEWEB)

    Zysset, B.; LaGasse, M.J.; Fujimoto, J.G.; Kafka, J.D.

    1989-02-06

    A high-repetition-rate femotosecond dye amplifier is demonstrated using a laser-diode-pumped Q-switched Nd:YAG laser. Amplification of wavelength-tunable 300-fs pulses from a synchronously mode-locked rhodamine dye laser is achieved with a saturated gain of 70 and a small gain of 200 at a repetition rate of 800 Hz. Maximum pulse energies of 40 nJ are obtained, and pulse compression to as short as 30 fs is demonstrated.

  6. Study on wavelength shortening and upgrading of the free electron laser (FEL)

    Energy Technology Data Exchange (ETDEWEB)

    Yamazaki, Tetsuo; Yamada, Kawakatsu; Sei, Norihiro; Ohgaki, Hideaki; Sugiyama, Suguru; Mikado, Tomohisa [Electrotechnical Lab., Tsukuba, Ibaraki (Japan)

    1997-02-01

    This study is a task of ``Comprehensive study`` in ``nuclear energy basic technology research``, which is promoted under cooperation of four research institutes. The Electrotechnical Laboratory conducted, in 1991 in the first period of colaboration, on successful oscillation at visible region (598 nm) as the first case in Japan, construction of small type accumulation ring NIJI-IV for FEL, successful oscillation of visible range from 595 to 488 nm by installing optical krystron with maximum frequency in the world, and successful emittance lowering of accumulation beam by wide improvement of the ring. In the optical resonator, studies on minute loss measuring technique and on recovery from mirror deterioration were promoted. In the second period started from fiscal year of 1994, studies on FEL oscillation technique in short wavelength and upgrading of FEL corresponding to a frontier area were started, to succeed an oscillation experiment at 350 nm in ultraviolet area on April, 1994. Then, studies on generation of high luminescence x-ray owing to laser Compton scattering using FEL as a future plan, on design of a new accumulation ring and on the others as well as studies on further quality improvement of electron beam and on optical resonator have been promoted. (G.K.)

  7. Phosphate-core silica-clad Er/Yb-doped optical fiber and cladding pumped laser.

    Science.gov (United States)

    Egorova, O N; Semjonov, S L; Velmiskin, V V; Yatsenko, Yu P; Sverchkov, S E; Galagan, B I; Denker, B I; Dianov, E M

    2014-04-07

    We present a composite optical fiber with a Er/Yb co-doped phosphate-glass core in a silica glass cladding as well as cladding pumped laser. The fabrication process, optical properties, and lasing parameters are described. The slope efficiency under 980 nm cladding pumping reached 39% with respect to the absorbed pump power and 28% with respect to the coupled pump power. Due to high doping level of the phosphate core optimal length was several times shorter than that of silica core fibers.

  8. Low-noise Raman fiber amplifier pumped by semiconductor disk laser.

    Science.gov (United States)

    Chamorovskiy, A; Rautiainen, J; Rantamäki, A; Okhotnikov, O G

    2011-03-28

    A 1.3 µm Raman fiber amplifier pumped by 1.22 µm semiconductor disk laser in co-propagation geometry is demonstrated. Measured relative intensity noise of -148 dB/Hz over frequency range up to 3.5 GHz was measured at 900 mW of pump power. 9 dB gain was achieved with co-propagating pumping geometry with less than 2 dB additional noise induced by amplifier to the signal. Nearly shot-noise-limited operation of semiconductor disk laser combined with the diffraction-limited beam allows for efficient core-pumping of the single-mode fiber Raman amplifiers and represents a highly practical approach which takes full advantage of co-propagating pumping.

  9. High power operation of cladding pumped holmium-doped silica fibre lasers.

    Science.gov (United States)

    Hemming, Alexander; Bennetts, Shayne; Simakov, Nikita; Davidson, Alan; Haub, John; Carter, Adrian

    2013-02-25

    We report the highest power operation of a resonantly cladding-pumped, holmium-doped silica fibre laser. The cladding pumped all-glass fibre utilises a fluorine doped glass layer to provide low loss cladding guidance of the 1.95 µm pump radiation. The operation of both single mode and large-mode area fibre lasers was demonstrated, with up to 140 W of output power achieved. A slope efficiency of 59% versus launched pump power was demonstrated. The free running emission was measured to be 2.12-2.15 µm demonstrating the potential of this architecture to address the long wavelength operation of silica based fibre lasers with high efficiency.

  10. THERMAL LENSING MEASUREMENTS IN THE ANISOTROPIC LASER CRYSTALS UNDER DIODE PUMPING

    Directory of Open Access Journals (Sweden)

    P. A. Loiko

    2012-01-01

    Full Text Available An experimental setup was developed for thermal lensing measurements in the anisotropic diode-pumped laser crystals. The studied crystal is placed into the stable two-mirror laser cavity operating at the fundamental transversal mode. The output beam radius is measured with respect to the pump intensity for different meridional planes (all these planes contain the light propagation direction. These dependencies are fitted using the ABCD matrix method in order to obtain the sensitivity factors showing the change of the optical power of thermal lens due to variation of the pump intensity. The difference of the sensitivity factors for two mutually orthogonal principal meridional planes describes the thermal lens astigmatism degree. By means of this approach, thermal lensing was characterized in the diode-pumped monoclinic Np-cut Nd:KGd(WO42 laser crystal at the wavelength of 1.067 μm for light polarization E || Nm.

  11. Diode-pumped Q-switched Nd{sup 3+} : YAG laser operating in a wide temperature range without thermal stabilisation of pump diodes

    Energy Technology Data Exchange (ETDEWEB)

    Vainshenker, A E; Vilenskiy, A V; Kazakov, A A; Lysoy, B G; Mikhailov, L K; Pashkov, V A [Open Joint-Stock Company ' M.F. Stel' makh Polyus Research and Development Institute' , Moscow (Russian Federation)

    2013-02-28

    A model sample of a compact low-power-consumption Nd{sup 3+} : YAG laser emitting 20-mJ pulses with a pulse repetition rate up to 20 Hz (in cyclic duty) at a wavelength of 1064 nm is developed and studied. The laser is designed for operating at external temperatures from -40 to +50 deg C. This was achieved by using quasi-end diode pumping without thermal stabilisation of pump diodes. (laser optics 2012)

  12. Frequency-doubled DBR-tapered diode laser for direct pumping of Ti:sapphire lasers generating sub-20 fs pulses.

    Science.gov (United States)

    Müller, André; Jensen, Ole Bjarlin; Unterhuber, Angelika; Le, Tuan; Stingl, Andreas; Hasler, Karl-Heinz; Sumpf, Bernd; Erbert, Götz; Andersen, Peter E; Petersen, Paul Michael

    2011-06-20

    For the first time a single-pass frequency doubled DBR-tapered diode laser suitable for pumping Ti:sapphire lasers generating ultrashort pulses is demonstrated. The maximum output powers achieved when pumping the Ti:sapphire laser are 110 mW (CW) and 82 mW (mode-locked) respectively at 1.2 W of pump power. This corresponds to a reduction in optical conversion efficiencies to 75% of the values achieved with a commercial diode pumped solid-state laser. However, the superior electro-optical efficiency of the diode laser improves the overall efficiency of the Ti:sapphire laser by a factor > 2. The optical spectrum emitted by the Ti:sapphire laser when pumped with our diode laser shows a spectral width of 112 nm (FWHM). Based on autocorrelation measurements, pulse widths of less than 20 fs can therefore be expected.

  13. Nd:YAG solid-state ring laser pumped by a light-emitting diode

    Energy Technology Data Exchange (ETDEWEB)

    Belozerov, S.A.; Kornienko, L.S.; Kravtsov, N.V.; Kuratev, I.I.; Rusakov, S.I.; Stel' makh, M.F.; Shelaev, A.A.; Shelaev, A.I.

    1984-01-01

    This letter reports lasing in an Nd:YAG solid-state laser (lambda = 1.06 ..mu..m) pumped either in pulses or continuously by a light-emitting diode. We report the first experimental results on this laser.(AIP)

  14. Pump spot size dependent lasing threshold in organic semiconductor DFB lasers fabricated via nanograting transfer

    DEFF Research Database (Denmark)

    Liu, Xin; Klinkhammer, Sönke; Wang, Ziyao

    2013-01-01

    material. This geometrically well-defined structure allows for a systematic investigation of the laser threshold behavior. The laser thresholds for these devices show a strong dependence on the pump spot diameter. This experimental finding is in good qualitative agreement with calculations based on coupled...

  15. Room-temperature diode-pumped Yb:KYF(4) laser.

    Science.gov (United States)

    Galzerano, Gianluca; Laporta, Paolo; Sani, Elisa; Bonelli, Lucia; Toncelli, Alessandra; Tonelli, Mauro; Pesatori, Alessandro; Svelto, Cesare

    2006-11-15

    Continuous-wave laser action has been demonstrated in a diode-pumped Yb:KYF(4) crystal. Crystal growth, spectroscopic measurements, and laser results are presented. A maximum output power of 505 mW, a slope efficiency of 43%, and a continuous wavelength tunability range of 65nm, from 1013 to 1078 nm, have been obtained at room temperature.

  16. Reducing Thermal Effect in End-Diode-Pumped Laser Crystal by Using a Novel Resonator

    Institute of Scientific and Technical Information of China (English)

    YAO Ai-Yun; HOU Wei; LI Hui-Qing; BI Yong; LIN Xue-Chun; GENG Ai-Cong; KONG Yu-Peng; CUI Da-Fu; XU Zu-Yan

    2005-01-01

    @@ We report a new way, i.e. double-end-pumping, to extend the stability range of a laser resonator, in advantage of making the thermal loading be effectively divided between the ends of the laser crystal to reduce the thermal effect, thus to extend the stability range.

  17. Diode-pumped 1.7-W erbium 3-µm fiber laser

    NARCIS (Netherlands)

    Jackson, S.D.; King, T.A.; Pollnau, M.

    1999-01-01

    Utilizing lifetime quenching of the Er3+ lower laser level by energy transfer to a Pr3+ co-dopant, 1.7 W output power and 17% slope efficiency are demonstrated from a double-clad diode-pumped 2.7-µm Er3+,Pr3+:ZBLAN fiber laser.

  18. Discrete excitation of mode pulses using a diode-pumped solid-state digital laser

    CSIR Research Space (South Africa)

    Ngcobo, Sandile

    2016-02-01

    Full Text Available In this paper, we experimentally demonstrate novel method of generating discrete excitation of on-demand Lagaurre-Gaussian (LG) mode pulses, in a diode pumped solid-state digital laser. The digital laser comprises of an intra-cavity spatial light...

  19. Methane-based in situ temperature rise measurement in a diode-pumped rubidium laser.

    Science.gov (United States)

    Wang, Rui; Yang, Zining; Wang, Hongyan; Xu, Xiaojun

    2017-02-15

    We measured active zone temperature rise of an operational diode-pumped rubidium laser non-perturbatively with methane-based near-infrared tunable diode laser spectroscopy (TDLAS). For a Rb+ methane diode-pumped alkali laser (DPAL), the temperature rise was obtained. Especially, the temperature differences (∼10  K) between lasing and un-lasing cases were well identified, which demonstrated a high sensitivity of the method. To our knowledge, this is the first demonstration of extending the methane-based TDLAS method to DPAL study.

  20. High Efficient LD-pumped Nd∶YVO4/ LBO Red Laser

    Institute of Scientific and Technical Information of China (English)

    ZHENG Quan; ZHAO Ling; TAN Huiming

    2001-01-01

    A design of high efficient LD-pumped Nd∶YVO4/LBO red laser was reported in this paper. For the first time, type-I critical phase-matched LBO was used for 1.342 μm intracavity frequency-doubling to obtain 671 nm red laser. With 760 mW incident pump power, 78 mW TEM00 mode red laser output was obtained, the optical-to-optical conversion up to 10%. Measurements showed the beam divergent angle less than 0.5 mrad, polarization degree more than 100∶1 and power instability in 48 hours less than ±2%.

  1. Passive mode locking of a Nd:KGW laser with hot-band diode pumping

    Science.gov (United States)

    Eibna Halim, M. Z.; Talukder, R. C.; Waritanant, T.; Major, A.

    2016-10-01

    Passive mode locking of a Nd:KGW laser with hot-band diode pumping at 910 nm was demonstrated. A semiconductor saturable absorber mirror was used as a mode locking mechanism. The laser generated 2.4 ps pulses at a repetition rate of ~83.8 MHz. An average output power of 87 mW was obtained at 1067 nm. To the best of our knowledge, this is the first report on passive mode locking of a Nd:KGW laser with low quantum defect pumping which holds great promise for further output power scaling.

  2. 桃源水电站发电机冷却水泵技改方案%Generator cooling pump upgrade of Taoyuan Hydropower Plant

    Institute of Scientific and Technical Information of China (English)

    罗云善; 卢学良

    2015-01-01

    桃源水电站发电机冷却水泵在运行过程中,曾多次出现在倒厂用电时,冷却水泵软启动装置报故障信号,在厂用电恢复后,冷却水泵无法重启动,从而导致发电机组冷却水中断,引起机组事故停机.针对桃源水电站发电机冷却水泵控制存在的问题,提出了相应的技改方案,避免在倒厂用电过程中引起冷却水泵软启动装置故障,导致机组事故停机的情况.%The turbine generator cooling pumps of Taoyuan Hydropower Plant had seen many times the pump soft start device fault signal in case of station service power switching during operation. The cooling pumps even failed to restart after recovery of power supply which led to cooling water supply failure and unit shutdown. In view of this cooling pump control problem,corresponding technical upgrade scheme was put forward.

  3. Spherical distribution structure of the semiconductor laser diode stack for pumping

    Institute of Scientific and Technical Information of China (English)

    Zhao Tianzhuo; Yu Jin; Liu Yang; Zhang Xue; Ma Yunfeng; Fan Zhongwei

    2011-01-01

    A semiconductor laser diode stack is used for pumping and 8 semiconductor laser diode arrays of the stack are put on a sphere,and the output of every bar is specially off-axis compressed to realize high coupling efficiency.The output beam of this semiconductor laser diode stack is shaped by a hollow duct to the laser active medium.The efficiency of the hollow light pipe,which is used for semiconductor laser diode stack coupling,is analyzed by geometric optics and ray tracing.Geometric optics analysis diagnoses the reasons for coupling loss and guides the design of the structure.Ray tracing analyzes the relation between the structural parameters and the output characteristics of this pumping system,and guides parameter optimization.Simulation and analysis results show that putting the semiconductor laser diode arrays on a spherical surface can increase coupling efficiency,reduce the optimum duct length and improve the output energy field distribution.

  4. Large aperture discharge-pumped KrF laser for picosecond amplification

    CERN Document Server

    Yuan Xiao; LiuJingRu; Goldhar, J

    2002-01-01

    A large aperture discharge-pumped KrF laser module with simple spark gaps was developed. The laser beam cross section of 4 cm x 3 cm and the maximum laser output energy of 1.3J in 20ns were obtained at the charging voltage of 30 kV and gas mixtures of [F sub 2] : [Kr] : [Ne] = 0.1 : 2 : 97.9. The gain and absorption coefficients at different gas mixtures were measured with a frequency doubled dye laser pumped by a XeCl laser. Using this laser module as a ps amplifier, the output energy of 140 mJ in 10 ps was obtained

  5. The effect of pulsewidth of pumping pulse on the stability of distributed feedback dye laser

    Science.gov (United States)

    Pasandideh, K.; Rahbari, M.; Sadighi Bonabi, R.

    2017-04-01

    The generation of a single and stable picosecond pulse by distributed feedback dye laser is investigated in this work. The numerical result for the rate equation system that includes the thermal effects in the lasing medium is provided. By applying this model to Rhodamine 6G, it is found that considerable improvement in the stability of the laser can be achieved by pumping the system with narrower laser pulses. The simulation shows that if the dye solution is pumped by sub-200 ps pulse, the laser can be operated in single-pulse output mode with acceptable stability in pulsewidth over a long range of pumping intensity. This result is confirmed by a more complicated model composed of non-averaged Maxwell and rate equations. Even though the thermal effects do not play a significant role in equivalent cavity lifetime, they result in considerable wavelength shift toward the shorter wavelengths.

  6. The progress of nuclear pumped laser in CFBR-Ⅱ reactor

    Institute of Scientific and Technical Information of China (English)

    Chengde Yang(杨成德); Hande Chen(陈涵德); Chun Zheng(郑春); Xiaolin Zhao(赵小林); Huilin Han(韩惠林)

    2003-01-01

    Development of nuclear pumped lasers (NPL) in the CFBR-Ⅱ reactor is briefly reviewed. The results ofthe two NPL experiments in CFBR-Ⅱ reactor are described. The first one focused on the principle ofnuclear pumped laser, and 4-mW laser output power achieved. The second NPL experiment focused onthe small signal gain and the efficiency of the nuclear pumped He-Ar-Xe gas mixture at 1.73 μm. Themaximum laser power measured to be 45 mW when thermal neutron flux rate is 6.9 × 10 14 cm-2 @ s-1.The small signal gain at 1.73μm by the Rigrod analysis method is to be 0.24%.cm-1, and the saturationintensity is fitted to be 36 W/cm2.

  7. A High-Energy, 100 Hz, Picosecond Laser for OPCPA Pumping

    Directory of Open Access Journals (Sweden)

    Hongpeng Su

    2017-09-01

    Full Text Available A high-energy diode-pumped picosecond laser system centered at 1064 nm for optical parametric chirped pulse amplifier (OPCPA pumping was demonstrated. The laser system was based on a master oscillator power amplifier configuration, which contained an Nd:YVO4 mode-locked seed laser, an LD-pumped Nd:YAG regenerative amplifier, and two double-pass amplifiers. A reflecting volume Bragg grating with a 0.1 nm reflective bandwidth was used in the regenerative amplifier for spectrum narrowing and pulse broadening to suit the pulse duration of the optical parametric amplifier (OPA process. Laser pulses with an energy of 316.5 mJ and a pulse duration of 50 ps were obtained at a 100 Hz repetition rate. A top-hat beam distribution and a 0.53% energy stability (RMS were achieved in this system.

  8. Active mode-locking via pump modulation in a Tm-doped fiber laser

    Directory of Open Access Journals (Sweden)

    Yu Wang

    2016-10-01

    Full Text Available We propose and experimentally realize a new class of actively mode-locking technique using pump modulation for rare-earth doped fiber lasers. A Tm-doped fiber laser at 2 μm is mode-locked using the proposed active mode-locking via pump modulation technique. Low-threshold continuous-wave mode-locking is achieved with a transform-limited pulse width of 4.4 ps, a spectral bandwidth of 0.9 nm, and a repetition rate of 12.9 MHz. Second-harmonic mode-locking is also demonstrated by simply driving the pump current at an appropriate frequency. More importantly, we believe that this technique can be applied to mode-lock other rare-earth doped fiber laser systems such as erbium- and ytterbium-doped fiber lasers.

  9. LD-pumped passively Q-switched red laser at 660 nm

    Institute of Scientific and Technical Information of China (English)

    Qinghua Xue(薛庆华); Quan Zheng(郑权); Yikun Bu(卜轶坤); Longsheng Qian(钱龙生)

    2004-01-01

    A laser diode (LD) pumped Nd:YAG red pulse laser at 660 nm was presented by V:YAG passively Qswitching and LBO intracavity frequency doubling. With 1.6-W incident pump power, average output power of 46-mW, pulse duration (FWHM) of 23.3 ns, pulse repetition rate of 21.6 kHz, peak power of 91.4 W, and single pulse energy of 2.13μJ were obtained. The beam quality factor M2 was less than 1.2. The fluctuations of pulse energy and repetition rate were less than 3% in 4 hours. The pulsed laser at 660 nm is expected to be used as the pump source of Cr3+:doped crystal to obtain the gain-switched tunable laser.

  10. A high power lamp-pumped LNA laser with thermally tuned etalon

    Science.gov (United States)

    Aminoff, C. G.; Essabaa, S.; Brissaud, I.; Arianer, J.

    1991-11-01

    This report describes arc-lamp pumped, tunable, continuous-wave LNA laser with improved output efficiency, suitable for optical pumping of helium. Using thermal tuning of intracavity etalons instead of angle tuning reduces losses caused by walk-off effects and provides continuous frequency scanning without a significant decrease in laser power. We obtain an output power of 4 W in a linewidth of 2.5 GHz with the laser wavelength tuned to the 1.083 μm absorption line of metastable helium. This result represents a fourfold gain in efficiency compared with conventional tuning by tilting. The laser provides efficient polarization of helium by optical pumping in various applications, such as nuclear spin polarization of 3He and spin-polarized electron sources.

  11. High-power diode-pumped AlGaAs surface-emitting laser.

    Science.gov (United States)

    Holm, M A; Burns, D; Cusumano, P; Ferguson, A I; Dawson, M D

    1999-09-20

    We report the development and characterization of an efficient diode-pumped surface-emitting semiconductor laser operating at approximately 870 nm. By using a semiconductor Bragg reflector stack/multiple GaAs quantum well structure, mounted within a conventional laser cavity, we achieved single transverse mode laser output powers of 153 mW. Self-tuning over a 15-nm spectral range has been obtained.

  12. Synchronous pumping of picosecond dye laser using high efficiency second harmonic generation from optical fibres

    Science.gov (United States)

    Lawandy, N. M.; Bernardin, J. P.; Macdonald, R. L.; Demouchy, G.

    1991-01-01

    The stable operation of a mode-locked dye laser synchronously pumped by the second harmonic of an Nd:YAG laser produced in an Nd codoped germanosilicate optical fiber is reported. The optical fiber preparation technique, which results in a second harmonic conversion efficiency of 2 percent, is described. This optical fiber SHG conversion efficiency is the highest reported to date using a continuous-wave mode-locked laser.

  13. Nanoimprinted organic semiconductor laser pumped by a light-emitting diode.

    Science.gov (United States)

    Tsiminis, Georgios; Wang, Yue; Kanibolotsky, Alexander L; Inigo, Anto R; Skabara, Peter J; Samuel, Ifor D W; Turnbull, Graham A

    2013-05-28

    An organic semiconductor laser, simply fabricated by UV-nanoimprint lithography (UV-NIL), that is pumped with a pulsed InGaN LED is demonstrated. Molecular weight optimization of the polymer gain medium on a nanoimprinted polymer distributed feedback resonator enables the lowest reported UV-NIL laser threshold density of 770 W cm(-2) , establishing the potential for scalable organic laser fabrication compatible with mass-produced LEDs.

  14. Research on fission fragment excitation of gases and nuclear pumping of lasers

    Science.gov (United States)

    Schneider, R. T.; Davie, R. N.; Davis, J. F.; Fuller, J. L.; Paternoster, R. R.; Shipman, G. R.; Sterritt, D. E.; Helmick, H. H.

    1974-01-01

    Experimental investigations of fission fragment excited gases are reported along with a theoretical analysis of population inversions in fission fragment excited helium. Other studies reported include: nuclear augmentation of gas lasers, direct nuclear pumping of a helium-xenon laser, measurements of a repetitively pulsed high-power CO2 laser, thermodynamic properties of UF6 and UF6/He mixtures, and nuclear waste disposal utilizing a gaseous core reactor.

  15. Effects of Plasma Formation on the Cesium Diode (DPAL) and Excimer (XPAL) Pumped Alkali Laser

    Science.gov (United States)

    Markosyan, Aram H.; Kushner, Mark J.

    2015-09-01

    Diode pumped alkali lasers (DPALs) and excimer pumped alkali lasers (XPALs) are being investigated as a means to convert optical pumps having poor optical quality to laser radiation having high optical quality. DPALs sustained in Cs vapor are pumped on the D2(852.35 nm), Cs(62S1/2) --> Cs(62P3/2) , transition and lase on the D1(894.59 nm) transition, Cs(62P1/2) --> Cs(62S1/2) . Collisional mixing (spin orbit relaxation) of the Cs(62P3/2) and Cs(62P1/2) levels is a key part of this three-level (in fact, a quasi-two-level) laser scheme. In the five-level XPAL pumping scheme, the CsAr(B2Σ1/ 2 +) state is optically pumped by 836.7 nm pulses, which later dissociates and produces Cs(62P3/2) . As in DPAL, a collisional relaxant transfers the population of Cs(62P3/2) to Cs(62P1/2) , which enables lasing on D1 transition. A first principals global computer model has been developed for both systems to investigate the effects of plasma formation on the laser performance. Argon is used as a buffer gas and nitrogen or ethane are used as a collisional relaxant at total pressure of 600 Torr at temperatures of 350-450 K, which produces vapor pressures of Cs of systems, a plasma formation in excess of 1014 - 1016cm-3 occurs, which potentially reduces laser output power by electron collisional mixing of upper and lower laser levels. Work supported by DoD High Energy Laser Multidisc, Res. Initiative.

  16. Short-pulse generation in a diode-end-pumped solid-state laser

    CSIR Research Space (South Africa)

    Ngcobo, S

    2010-09-01

    Full Text Available in the picosecond region with a maximum average output power of 2.8W. Passive modelocking of the Nd:YVO4 laser has been demonstrated using a semiconductor saturable absorber mirror (SESAM). THEORETICAL ANALYSIS Ultra-fast solid state lasers are a key component... theoretical PQSML,th of 2.08W. Short-Pulse Generation in a Diode-End-Pumped Solid-State Laser S. Ngcobo1,2, C. Bollig1 and H. Von Bergmann2 1CSIR National Laser Centre, PO Box 395, Pretoria, 0001, South Africa 2Laser Research Center, University...

  17. Room temperature CW and QCW operation of Ho:CaF2 laser pumped by Tm:fiber laser

    Science.gov (United States)

    Jelínek, Michal; Cvrček, Jan; Kubeček, Václav; Zhao, Beibei; Ma, Weiwei; Jiang, Dapeng; Su, Liangbi

    2017-05-01

    Laser radiation in the wavelength range around 2 μm is required for its specific properties - it is very suitable for medical applications, remote sensing, or pumping of optical parametric oscillators to generate ultrafast pulses in the mid-IR region further exploited in nonlinear optics. Crystals as YLF, YAG, LLF, and GdVO4 doped by holmium were already investigated and found suitable for the tunable laser generation around 2.1 mμ. Only a few works are devoted to the laser operation of holmium-doped fluorides as CaF2. In this work, pulsed and continuous-wave laser operation of a modified- Bridgman-grown Ho:CaF2 active crystal at room temperature is reported. A commercial 50 W 1940 nm Tm-fiber laser was used to pump a laser oscillator based on a novel 10 mm long 0.5 at.% Ho:CaF2 active crystal placed in the Peltiercooled holder. In the pulsed regime (10 ms, 10 Hz), the laser slope efficiency of 53 % with respect to the absorbed pump power was achieved. The laser generated at the central wavelength of 2085 nm with the maximum mean output power of 365 mW corresponding to the power amplitude of 3.65 W. In the continuous wave regime, the maximum output power was 1.11 W with the slope efficiency of 41 % with respect to the absorbed pump power. To our best knowledge this is the first demonstration of this laser active material operating in the CW regime at room temperature. The tuning range over 60 nm from 2034 to 2094 nm was achieved using a birefringent filter showing the possibility to develop a mode-locked laser system generating pulses in the sub-picosecond range.

  18. Improved performance of high average power semiconductor arrays for applications in diode pumped solid state lasers

    Energy Technology Data Exchange (ETDEWEB)

    Beach, R.; Emanuel, M.; Benett, W.; Freitas, B.; Ciarlo, D.; Carlson, N.; Sutton, S.; Skidmore, J.; Solarz, R.

    1994-01-01

    The average power performance capability of semiconductor diode laser arrays has improved dramatically over the past several years. These performance improvements, combined with cost reductions pursued by LLNL and others in the fabrication and packaging of diode lasers, have continued to reduce the price per average watt of laser diode radiation. Presently, we are at the point where the manufacturers of commercial high average power solid state laser systems used in material processing applications can now seriously consider the replacement of their flashlamp pumps with laser diode pump sources. Additionally, a low cost technique developed and demonstrated at LLNL for optically conditioning the output radiation of diode laser arrays has enabled a new and scalable average power diode-end-pumping architecture that can be simply implemented in diode pumped solid state laser systems (DPSSL`s). This development allows the high average power DPSSL designer to look beyond the Nd ion for the first time. Along with high average power DPSSL`s which are appropriate for material processing applications, low and intermediate average power DPSSL`s are now realizable at low enough costs to be attractive for use in many medical, electronic, and lithographic applications.

  19. Experiment Research on a Highly Stable LD-pumped Solid State Laser

    Institute of Scientific and Technical Information of China (English)

    YAN Ping; HE Bin; WEI Guanghui

    2000-01-01

    In high power laser systems, the stability of the seed laser is vitally important. This paper presents the work on the design and manufacture of a highly stable LD pumped solid state seed laser which has the advantages of being all solid state, compact, easy to manufacture and low cost. The laser was composed of two parts. One was an LD pumped 0.5 mm thin Nd: YLF laser system in which the instability was around±6% (3σ). The other was a close-looped laser power control system using external cavity power feedback. Using an electro-optic modulator, a 1×2 optical fiber splitter and a signal processing circuit, we successfully realized the highly stable LD pumped Nd: YLF laser in which the instability of laser output power was lower than±0.2 %/hour (3σ). A digital PID (Proportion, Integration and Differentiation) control method was used with a control frequency of 40 kHz. The 3 mW of highly stable laser power through the optical fiber was obtained.

  20. Investigation of pre-pulse pumping laser for preserving temporal waveform of stimulated Raman scattering

    Science.gov (United States)

    Chen, Junchi; Su, Hongpeng; Peng, Yujie; Guo, Xiaoyang; Wang, Zhanshan; Leng, Yuxin

    2017-01-01

    A modified polarized beam combination technique is proposed for preserving the temporal waveforms of stimulated Raman scattering. 1064 nm pre-pulse pumping lasers prior to the main pumping laser with a delay time are generated and injected into a Ba(NO3)2 Raman medium to excite the crystal firstly. The influences of pre-pulse lasers with various energy levels on the temporal shapes of Raman lasers are investigated, and it is demonstrated that the temporal waveforms of the Raman laser are distorted once the energies of the pre-pulse are below and above the required energy for preserving the temporal shapes of Stokes radiation. It is also discovered that the temporal shape of the 1197 nm Raman laser cannot be perfectly preserved if the energy of the 1064 nm main laser is too low or the relative delay time is too large. Moreover, the optical conversion efficiency and Stokes laser energy obtained under pumping lasers with single and double intensity peaks are compared.

  1. Efficient quasi-three-level Nd:YAG laser at 946 nm pumped by a tunable external cavity tapered diode laser

    DEFF Research Database (Denmark)

    Cheng, Haynes Pak Hay; Jensen, Ole Bjarlin; Tidemand-Lichtenberg, Peter;

    2010-01-01

    Using a tunable external cavity tapered diode laser (ECDL) pumped quasi-three-level Nd:YAG laser, a fivefold reduction in threshold and twofold increase in slope efficiency is demonstrated when compared to a traditional broad area diode laser pump source. A TEM00 power of 800 mW with 65% slope...... efficiency is obtained, the highest reported TEM00 power from any 946 nm Nd:YAG laser pumped by a single emitter diode laser pump source. A quantum efficiency of 0.85 has been estimated from experimental data using a simple quasi-three-level model. The reported value is in good agreement with published...... values, suggesting that the model is adequate. Improvement of the 946 nm laser due to the ECDL's narrow spectrum proves to be less significant when compared to its spatial quality, inferring a broad spectrum tapered diode laser pump source may be most practical. Experimental confirmation of such setup...

  2. PERFORMANCE OPTIMIZATION OF THE DIODE-PUMPED SOLID-STATE LASER FOR SPACE APPLICATIONS

    Directory of Open Access Journals (Sweden)

    D. A. Arkhipov

    2015-11-01

    Full Text Available Subject of Research. Thermophysical and optical techniques of parameter regulation for diode pumped solid-state laser are studied as applied to space laser communication and laser ranging lines. Methods. The investigations are carried out on the base of the original design of diode pumped solid-state laser module that includes the following: Nd:YAG slab element, diode pumped by 400W QCW produced by NORTHROP GRUMMAN; two-pass unstable resonator with rotation of the laser beam aperture about its axis through 1800; the output mirror of the resonator with a variable reflection coefficient; hyperthermal conductive plates for thermal stabilization of the laser diode generation modes. The presence of thermal conductive plates excludes conventional running water systems applied as cooling systems for solid-state laser components. The diodes temperature stabilization is achieved by applying the algorithm of pulse-width modulation of power of auxiliary electric heaters. To compensate for non-stationary thermal distortions of the slab refractive index, the laser resonator scheme comprises a prism reflector with an apex angle of 1200. Narrow sides of the prism are covered with reflective coating, and its wide side is sprayed with antireflection coating. The beam aperture is turned around its axis through 1800 because of triple reflection of the beam inside the prism. The turning procedure leads to compensating for the output beam phase distortions in view of symmetric character of the aberrations of slab refractive index. To suppress parasitic oscillations inside the slab, dielectric coatings of wide sides of the slab are used. Main Results. We have demonstrated theoretically and experimentally that the usage of hyperthermal conductive plates together with the algorithm of pulse-width modulation provides stabilizing of the diode substrate temperature accurate within ± 0.1 °С and smoothing the temperature distribution along the plate surface accurate

  3. Tm:GGAG crystal for 2μm tunable diode-pumped laser

    Science.gov (United States)

    Šulc, Jan; Boháček, Pavel; Němec, Michal; Fibrich, Martin; Jelínková, Helena; Trunda, Bohumil; Havlák, Lubomír.; Jurek, Karel; Nikl, Martin

    2016-04-01

    The spectroscopy properties and wavelength tunability of diode pumped laser based on Tm-doped mixed gadolinium-gallium-aluminium garnet Gd3(GaxAl1-x)5O12 (Tm:GGAG) single crystal were investigated for the first time. The crystal was grown by Czochralski method in a slightly oxidative atmosphere using an iridium crucible. The tested Tm:GGAG sample was cut from the grown crystal boule perpendicularly to growth direction (c-axis). The composition of sample was determined using electron microprobe X-ray elemental analysis. For spectroscopy and laser experiments 3.5mm thick plane-parallel face-polished plate (without AR coatings) with composition Gd2.76Tm0.0736Ga2.67Al2.50O12 (2.67 at.% Tm/Gd) was used. A fiber (core diameter 400 μm, NA= 0.22) coupled laser diode (emission wavelength 786 nm) was used for longitudinal Tm:GGAG pumping. The laser diode was operating in the pulsed regime (10 ms pulse length, 10 Hz repetition rate, maximum power amplitude 18 W). The 145mm long semi-hemispherical laser resonator consisted of a flat pumping mirror (HR @ 1.8- 2.10 μm, HT @ 0.78 μm) and curved (r = 150mm) output coupler with a reflectivity of » 97% @ 1.8- 2.10 µm. The maximum laser output power amplitude 1.14W was obtained at wavelength 2003nm for absorbed pump power amplitude 4.12W. The laser slope efficiency was 37% in respect to absorbed pumping power. Wavelength tuning was accomplished by using 2mm thick MgF2 birefringent filter placed inside the laser resonator at the Brewster angle. The laser was continuously tunable over 180nm in a spectral region from 1856nm to 2036 nm.

  4. Single-mode, All-Solid-State Nd:YAG Laser Pumped UV Converter

    Science.gov (United States)

    Prasad, Narasimha S.; Armstrong, Darrell, J.; Edwards, William C.; Singh, Upendra N.

    2008-01-01

    In this paper, the status of a high-energy, all solid-state Nd:YAG laser pumped nonlinear optics based UV converter development is discussed. The high-energy UV transmitter technology is being developed for ozone sensing applications from space based platforms using differential lidar technique. The goal is to generate greater than 200 mJ/pulse with 10-50 Hz PRF at wavelengths of 308 nm and 320 nm. A diode-pumped, all-solid-state and single longitudinal mode Nd:YAG laser designed to provide conductively cooled operation at 1064 nm has been built and tested. Currently, this pump laser provides an output pulse energy of >1 J/pulse at 50 Hz PRF and a pulsewidth of 22 ns with an electrical-to-optical system efficiency of greater than 7% and a M(sup 2) value of <2. The single frequency UV converter arrangement basically consists of an IR Optical Parametric Oscillator (OPO) and a Sum Frequency Generator (SFG) setups that are pumped by 532 nm wavelength obtained via Second Harmonic Generation (SHG). In this paper, the operation of an inter cavity SFG with CW laser seeding scheme generating 320 nm wavelength is presented. Efforts are underway to improve conversion efficiency of this mJ class UV converter by modifying the spatial beam profile of the pump laser.

  5. Plasma Formation During Operation of a Diode Pumped Alkali Laser (DPAL) in Cs

    Science.gov (United States)

    Babaeva, Natalia Yu.; Zatsarinny, Oleg; Bartschat, Klaus; Kushner, Mark J.

    2014-10-01

    Diode pumped Alkali Lasers (DPALs) produce laser action on the resonant lines of alkali atoms. Diode lasers resonantly pump the 2P3/2 state of the alkali atom which is collisionally relaxed to the 2P3/2 state which then lases to the ground state 2S1/2. The low optical quality of high power semiconductor diode lasers is converted into high optical quality laser radiation from the alkali vapor. The Cs DPAL system using Ar/Cs/C2H6 mixtures has shown promising results. (C2H6 is the collisional relaxant.) In other studies, resonant excitation of alkali vapor by low power lasers has been used to produce highly ionized channels, initiated through associative ionization and superelastic electron heating. The issue then arises if plasma formation occurs during DPAL by similar mechanisms which would be detrimental to laser performance. In this paper, we report on results from a computational study of a DPAL using Cs vapor. The global model addresses quasi-cw pumping of the Cs(2P3/2) state by laser diodes, and includes a full accounting of the resulting electron kinetics. To enable this study, the B-spline R-matrix (BSR) with pseudostates method was employed to calculate electron impact cross sections for Cs. We found that for pump rates of many to 10 kW/cm2, plasma densities approaching 1013 cm-3 occur during laser oscillation with higher values in the absence of laser oscillation. Supported by DoD High Energy Laser Mult. Res. Initiative and NSF.

  6. 1.3 µm Raman-bismuth fiber amplifier pumped by semiconductor disk laser.

    Science.gov (United States)

    Chamorovskiy, A; Rautiainen, J; Rantamäki, A; Golant, K M; Okhotnikov, O G

    2011-03-28

    A hybrid Raman-bismuth fiber amplifier pumped in co-propagation configuration by a single 1.22 µm semiconductor disk laser is presented. The unique attribute of this dual-gain system is that both amplifiers require the pump source with the same wavelength because pump-Stokes spectral shift in 1.3 µm Raman amplifier and pump-gain bandwidth separation in 1.3 µm bismuth fiber amplifier have the same value. Residual pump power at the output of Raman amplifier in this scheme is efficiently consumed by bismuth-doped fiber thus increasing the overall conversion efficiency. The small-signal gain of 18 dB at 1.3 W of pump power has been achieved for hybrid scheme which is by 9 dB higher as compared with isolated Raman amplifier without bismuth fiber. Low noise performance of pump semiconductor disk laser with RIN of -150 dB/Hz combined with nearly diffraction-limited beam quality and Watt-level output powers allows for efficient core-pumping of a single-mode fiber amplifier systems and opens up new opportunities for amplification in O-band spectral range.

  7. Novel Single-Frequency Diode Pumped Solid-State Lasers and Their Applications in Laser Ranging and Velocimetry

    Institute of Scientific and Technical Information of China (English)

    杨苏辉; 吴克瑛; 魏光辉

    2001-01-01

    Two models of laser diode pumped unidirectional single-frequency ring lasers with maximum single-frequency output powers of 1 W and 780mW are investigated. The statistical linewidth of the free-run laser is measured to be 2.1 kHz within 5μs by using a single-mode fibre link. We use the monolithic laser to measure the angular speed of a spinning motor and simulate a linearly frequency modulated continuous-wave ladar system in the laboratory.

  8. 885-nm Pumped Ceramic Nd:YAG Master Oscillator Power Amplifier Laser System

    Science.gov (United States)

    Yu, Anthony

    2012-01-01

    The performance of a traditional diode pumped solid-state laser that is typically pumped with 808-nm laser diode array (LDA) and crystalline Nd:YAG was improved by using 885-nm LDAs and ceramic Nd:YAG. The advantage is lower quantum defect, which will improve the thermal loading on laser gain medium, resulting in a higher-performance laser. The use of ceramic Nd:YAG allows a higher Nd dopant level that will make up the lower absorption at the 885-nm wavelength on Nd:YAG. When compared to traditional 808-nm pump, 885-nm diodes will have 30% less thermal load (or wasted heat) and will thus see a similar percentage improvement in the overall laser efficiency. In order to provide a more efficient laser system for future flight missions that require the use of low-repetition- rate (systems are numerous. The epitaxial structures of these 885-nm diodes are aluminum-free. There is a significant reduction in the thermal load generated from the Stokes shift or quantum defects. A Stokes shift is the energetic difference between the pump and laser photons. Pumping at a wavelength band closer to the lasing wavelength can reduce the thermal load by .30% compared to traditional pumping at 808 nm, and increase the optical- to-optical efficiency by the same factor. The slope efficiency is expected to increase with a reduction in the thermal load. The typical crystalline Nd:YAG can be difficult to produce with doping level >1% Nd. To make certain that the absorption at 885 nm is on the same par as the 808-nm diode, the Nd:YAG material needs to be doped with higher concentration of Nd. Ceramic Nd:YAG is the only material that can be tailored to specific needs.

  9. Cryogenic nanosecond and picosecond high average and peak power(HAPP) pump lasers for ultrafast applications

    Institute of Scientific and Technical Information of China (English)

    David C.Brown; Sten Tornegrd; Joseph Kolis

    2016-01-01

    Using cryogenic laser technology, it is now possible to design and demonstrate lasers that have concomitant high average and peak powers, with near-diffraction-limited beam quality. We refer to these new laser systems as HAPP lasers. In this paper, we review important laser crystal materials properties at cryogenic temperature, with an emphasis on Yb lasers, and discuss the important design considerations, including the laser-induced damage threshold, nonlinear effects and thermal effects. A comprehensive model is presented to describe diode pulsed pumping with arbitrary duration and repetition rate, and is used with the Frantz–Nodvik equation to describe, to first order, the performance of HAPP laser systems. A computer code with representative results is also described.

  10. Diode-pumped Q-switched Nd:YLF laser at 1313 nm

    Science.gov (United States)

    Xu, Shan; Gao, Shufang; Zheng, Chunyan

    2016-06-01

    In this letter, we describe the operation of an end-pumped acousto-optic Q-switched Nd:YLF laser. According to the theoretical analysis and calculation for Nd:YLF crystal, the thermal focal length of σ-polarized laser is positive in plane-parallel resonator, while that of π-polarized laser is negative. Hence laser operation at σ-polarized 1313 nm should be stable in plane-parallel cavity. When absorbed pump power is 12.45 W and the pulse repetition frequency is 10 kHz, 3.1 W output laser at 1313 nm is achieved. As a result, the optical-optical conversion efficiency is 25.4 % and slope efficiency is 31.2 %, respectively.

  11. Dynamics of Efficiency Change by Temperature in Diode Pumped Nd:YAG Heat Capacity Laser

    Institute of Scientific and Technical Information of China (English)

    WANG Xiao-Jun; TANG Bing; SHU Xiao-Jian

    2007-01-01

    We investigate the influence of temperature on the efficiency of diode pumped Nd:YAG heat capacity laser is studied. It is shown that the efficiency of such a laser system is greatly reduced at higher temperature. This bad behaviour is mainly caused by the doped-ion redistribution among various Stark levels of the ground state, and by a thermal equilibrium between the upper laser level and the pump level. Meanwhile, the thermal excitations from the ground state to the lower laser level also play a role. We derive a model to describe those effects, with the considerations of emission spectrum of laser diodes, the subtle Stark structures and the linewidth of absorption and of simulated-emission.

  12. Lasing of ambient air with microjoule pulse energy pumped by a multi terawatt IR femtosecond laser

    CERN Document Server

    Point, Guillaume; Brelet, Yohann; Mitryukovskiy, Sergey; Ding, Pengji; Houard, Aurélien; Mysyrowicz, André

    2014-01-01

    We report on the lasing action of atmospheric air pumped by an 800 nm femtosecond laser pulse with peak power up to 4 TW. Lasing emission at 428 nm increases rapidly over a small range of pump laser power, followed by saturation above ~ 1.5 TW. The maximum lasing pulse energy is measured to be 2.6 uJ corresponding to an emission power in the MW range, while a maximum conversion efficiency of is measured at moderate pump pulse energy. The optical gain inside the filament plasma is estimated to be excess of 0.7/cm. The lasing emission shows a doughnut profile, reflecting the spatial distribution of the pump-generated white-light continuum that acts as a seed for the lasing. We attribute the pronounced saturation to the defocusing of the seed in the plasma amplifying region and to the saturation of the seed intensity.

  13. Manipulating coherence resonance in a quantum dot semiconductor laser via electrical pumping.

    Science.gov (United States)

    Otto, Christian; Lingnau, Benjamin; Schöll, Eckehard; Lüdge, Kathy

    2014-06-02

    Excitability and coherence resonance are studied in a semiconductor quantum dot laser under short optical self-feedback. For low pump levels, these are observed close to a homoclinic bifurcation, which is in correspondence with earlier observations in quantum well lasers. However, for high pump levels, we find excitability close to a boundary crisis of a chaotic attractor. We demonstrate that in contrast to the homoclinic bifurcation the crisis and thus the excitable regime is highly sensitive to the pump current. The excitability threshold increases with the pump current, which permits to adjust the sensitivity of the excitable unit to noise as well as to shift the optimal noise strength, at which maximum coherence is observed. The shift adds up to more than one order of magnitude, which strongly facilitates experimental realizations.

  14. Stochastic resonance for signal-modulated pump noise in a single-mode laser

    Institute of Scientific and Technical Information of China (English)

    Liangying Zhang; Li Cao; Fahui Zhu

    2006-01-01

    By adopting the gain-noise model of the single-mode laser in which with bias and periodical signals serve as inputs, combining with the effect of coloured pump noise, we use the linear approximation method to calculate the power spectrum and signal-to-noise ratio (SNR) of the laser intensity under the condition of pump noise and quantum noise cross-related in the form of δ function. It is found that with the change of pump noise correlation time, both SNR and the output power will occur stochastic resonance (SR). If the bias signal α is very small, changing the intensities of pump noise and quantum noise respectively does not lead to the appearance of SR in the SNR; while α increases to a certain number, SR appears.

  15. Solid-state led-pumped YAG:Nd/sup 3 +/ ring laser

    Energy Technology Data Exchange (ETDEWEB)

    Belozerov, S.A.; Korniyenko, L.S.; Kravtsov, N.V.; Kuratev, I.I.; Rusakov, S.I.; Stel' makh, M.F.; Shelayev, A.A.; Shelayev, A.N.

    1984-01-12

    The article is a report on attainment of stimulated emission in a YAG:Nd/sup 3 +/ solid-state ring laser (lambda = 1.06 ..mu..m) with both cw and pulsed pumping by light-emitting diodes. The YAG:Nd/sup 3 +/ crystal was 1.5 mm in diameter and 20 mm long with Brewster faces. The laser was made as a monoblock in which channels were drilled for the laser beam. Total losses on the mirrors did not exceed 0.2%. Cavity perimeter was 22 cm. Pumping was by two lines of LEDs based on epitaxial heterostructure Al/sub x/Ga/sub 1-x/As. In the pulsed pumping mode maximum pulse duration was 8 ms, and maximum recurrence rate was 100 Hz. The threshold pumping current in the pulsed mode was about 1.1 A with prf of 10 Hz, pulse duration of 0.5 ms and temperature of 300 K. Maximum admissible current in this mode is 6 A. In cw pumping, the LED lines were fed by a stabilized DC source at voltage of about 40 V. Threshold pumping current was about 1.5 A, i.e., the threshold power was about 60 W. The optimum maximum current in the cw mode was about 2.0 A. Emission power was a near-linear function of current through the LEDs in either pumping mode. It was experimentally demonstrated that a rotating ring laser can produce stable beats with both cw and pulsed LED pumping. It should be possible to use self-switching modes to measure non-reciprocal effects. 5 references, 2 figures.

  16. Clad-pumped Er-nanoparticle-doped fiber laser (Conference Presentation)

    Science.gov (United States)

    Baker, Colin C.; Friebele, E. Joseph; Rhonehouse, Daniel L.; Marcheschi, Barbara A.; Peele, John R.; Kim, Woohong; Sanghera, Jasbinder S.; Zhang, Jun; Chen, Youming; Pattnaik, Radha K.; Dubinskii, Mark

    2017-03-01

    Erbium-doped fiber lasers are attractive for directed energy weapons applications because they operate in a wavelength region that is both eye-safer and a window of high atmospheric transmission. For these applications a clad-pumped design is desirable, but the Er absorption must be high because of the areal dilution of the doped core vs. the pump cladding. High Er concentrations typically lead to Er ion clustering, resulting in quenching and upconversion. Nanoparticle (NP) doping of the core overcomes these problems by physically surrounding the Er ions with a cage of Al and O in the NP, which keeps them separated to minimize excited state energy transfer. A significant issue is obtaining high Er concentrations without the NP agglomeration that degrades the optical properties of the fiber core. We have developed the process for synthesizing stable Er-NP suspension which have been used to fabricate EDFs with Er concentrations >90 dB/m at 1532 nm. Matched clad fibers have been evaluated in a core-pumped MOPA with pump and signal wavelengths of 1475 and 1560 nm, respectively, and efficiencies of 72% with respect to absorbed pump have been obtained. We have fabricated both NP- and solution-doped double clad fibers, which have been measured in a clad-pumped laser testbed using a 1532 nm pump. The 1595 nm laser efficiency of the NP-doped fiber was 47.7%, which is high enough for what is believed to be the first laser experiment with the cladding pumped, NP-doped fiber. Further improvements are likely with a shaped cladding and new low-index polymer coatings with lower absorption in the 1500 - 1600 nm range.

  17. Diode-pumped 1.7-W erbium 3-µm fiber laser

    NARCIS (Netherlands)

    Jackson, Stuart D.; King, Terence A.; Pollnau, Markus

    1999-01-01

    We report what is to our knowledge the first 3-mm fiber laser of the 1-W class. 1.7 W of output power and 17.3% slope eff iciency (with respect to the launched pump power) at a wavelength of 2.71 mm are demonstrated from a double-clad erbium-doped ZBLAN fiber diode pumped at 790 nm. Energy transfer

  18. Enhanced performance of thin-disk lasers by pumping into the zero-phonon line.

    Science.gov (United States)

    Weichelt, Birgit; Voss, Andreas; Abdou Ahmed, Marwan; Graf, Thomas

    2012-08-01

    Pumping Yb:YAG or Yb:LuAG into the zero-phonon line at 969 nm instead of using the common pump wavelength of 940 nm reduces the heat generation by 32%. In addition to the 3% increase of the Stokes efficiency, this significantly reduces the diffraction losses caused by the thermally induced phase distortions leading to a remarkable increase of the overall efficiency especially of fundamental-mode thin-disk lasers. Using this pumping scheme in an Yb:LuAG thin-disk laser, we achieved 742 W of nearly diffraction limited (M2≈1.5) output power at an unprecedented high optical efficiency of 58.5%. For multimode operation (M2≈15) the maximum optical efficiency of an Yb:YAG thin-disk laser was increased to 72%.

  19. Polarized three-photon-pumped laser in a single MOF microcrystal.

    Science.gov (United States)

    He, Huajun; Ma, En; Cui, Yuanjing; Yu, Jiancan; Yang, Yu; Song, Tao; Wu, Chuan-De; Chen, Xueyuan; Chen, Banglin; Qian, Guodong

    2016-03-17

    Higher order multiphoton-pumped polarized lasers have fundamental technological importance. Although they can be used to in vivo imaging, their application has yet to be realized. Here we show the first polarized three-photon-pumped (3PP) microcavity laser in a single host-guest composite metal-organic framework (MOF) crystal, via a controllable in situ self-assembly strategy. The highly oriented assembly of dye molecules within the MOF provides an opportunity to achieve 3PP lasing with a low lasing threshold and a very high-quality factor on excitation. Furthermore, the 3PP lasing generated from composite MOF is perfectly polarized. These findings may eventually open up a new route to the exploitation of multiphoton-pumped solid-state laser in single MOF microcrystal (or nanocrystal) for future optoelectronic and biomedical applications.

  20. Femtosecond laser pumped by high-brightness coherent polarization locked diodes.

    Science.gov (United States)

    Purnawirman; Phua, P B

    2011-08-01

    We demonstrate, for the first time to our knowledge, the use of a coherent polarization locked diode as the high-brightness pump source for a femtosecond laser. Four diode emitters are coherently locked to produce more than 5 W linearly polarized, narrow linewidth, and single-lobed pump beam. This gives >10× brightness improvement over the conventional diode array. The diode beam is then used to pump a Yb:KYW laser to obtain 2 W output with 57% slope efficiency in cw laser operation. By using a saturable absorber mirror, we achieved cw mode-locking operation with a 177 fs pulse width at an average power of 0.55 W.

  1. Compact resonantly intra-cavity pumped tunable Ho:Sc2SiO5 laser

    Science.gov (United States)

    Yang, Xiao-tao; Song, En-zhe; Xie, Wen-qiang

    2017-09-01

    A compact intra-cavity pumped low threshold continuous-wave Ho:Sc2SiO5 laser is reported. The characteristics of output wavelength tuning are investigated by use a intra-cavity briefringent (BF) filter. A wavelength tunable range of 140 nm from 2020 to 2160 nm is achieved. For the free-running mode, the laser slope efficiency is 24.8%, when the output central wavelength is 2110 nm. The laser threshold is about 820 mW of incident pump power. With the BF filter, a maximum output power of 870 mW is obtained at the incident pump power of 5 W, corresponding to a slope efficiency of 20.3%. The characteristics of output wavelength verse the crystal temperature are also investigated.

  2. A stable gain-switched Ho:CYA laser resonantly pumped at 1922 nm

    Science.gov (United States)

    Zhang, J. N.; Chen, B. H.; Shen, D. Y.; Xu, X. D.

    2017-04-01

    We report on a gain-switched Ho:CaYAlO4 laser resonantly pumped by a home-constructed high power Tm:fiber laser at ~1922 nm. Stable nanosecond single-pulse operation could be maintained when the continuous-wave pump signal was modulated at repetition rates of 60-100 kHz with an acousto-optic modulator. A pulse duration of 311 ns has been obtained at a 60 kHz repetition rate under a pump power level of 11 W. The temporal stability and simplicity of operation make this laser suitable for a variety of applications, such as spectroscopy, gas sensing, and as the seed source of a master oscillation power amplifier system.

  3. Solar radiation pumped solid state of lasers for Solar Power Satellites

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Ruiyi [New Jersey (United States)

    2000-07-01

    The Laser Solar Power Satellites (L-SPS) is the most promising way to overcome global energy and environmental and economical problems. The purpose was to use the favorable combination of solar radiation, modern lasers and the extremely promising phenomenon Optical Phase Conjugation (OPC). Direct conversion of solar energy to energy of a high-power laser beam has the advantage of high efficiency and precise energy transportation. In this paper, direct solar radiation pumping of the laser is compared with the pumping using the intermediate stage of the conversion of the solar radiation in electrical energy. Possible solid-state lasers that can be used in L-SPS are also discussed (including optical system and cooling system). [Spanish] Los Satelites de Energia Solar Laser (L-SPS) son la forma mas prometedora para contrarrestar los problemas globales de energia, ambientales y problemas economicos. El proposito fue el de usar la combinacion favorable de radiacion solar, laseres modernos y el fenomeno extremadamente prometedor de conjugacion de fase optica (OPC). La conversion directa de energia solar a energia de un rayo laser de alta potencia tiene la ventaja de la alta eficiencia y precision de la transportacion de la energia. En este documento la radiacion solar directa impulsada por el laser se compara con la impulsion usando el estado intermedio de conversion de la radiacion solar en energia electrica. Tambien se analizan los posibles laseres de estado solido que pueden usarse en L-SPS (incluyendo el sistema optico y el sistema de enfriamiento).

  4. Influences of pump transitions on thermal effects of multi-kilowatt thulium-doped fiber lasers

    CERN Document Server

    Yang, Jianlong; Tang, Yulong; Xu, Jianqiu

    2015-01-01

    Thermal effects are critical constrains for developing high-power thulium-doped fiber lasers (TDFLs). In this paper, we numerically investigate the lasing and thermal characteristics of the TDFLs under different pump transitions. Our results show, the widely-used pump transition $^3H_6\\rightarrow^3H_4$, taking advantages of high-power high-efficiency laser diodes at $\\sim$0.8 $\\mu$m, may not be a superior choice for directly outputting multi-kilowatt at 2 $\\mu$m because of severe thermal problems. Meanwhile, using other pump transitions resulting 2-$\\mu$m emissions, especially the in-band pump transition $^3H_6\\rightarrow^3F_4$, will decrease the generated heat to a large extent. By optimizing the power filling factor of the gain fiber, we find a 2-$\\mu$m TDFL cladding-pumped at 1.9 $\\mu$m will lead to the laser slope efficiency close to its quantum efficiency (95\\%). The induced ultra-low quantum defect would be of great importance for power scaling. We thus propose tandem-pumped TDFLs for reducing the heat ...

  5. High power CW diode-side-pumped Nd:YAG rod laser

    Institute of Scientific and Technical Information of China (English)

    Hailin Wang(王海林); Weiling Huang(黄维玲); Zhuoyou Zhou(周卓尤); Hongbing Cao(曹红兵)

    2003-01-01

    We report on the characterization of a diode-side-pumped Nd:YAG rod laser operating at high CW output power. A four-fold pump configuration is designed and the pump light is directly coupled into the Nd:YAG rod without the help of any cylindrical lenses. The distribution of pump light in the Nd:YAG rod has been calculated by using ray tracing program. The thermal lens effect of the Nd:YAG rod has been experimentally measured. A maximum output power of 800 W at 1064 nm in multimode operation is obtained for a pump power of 2400 W with 33% optical-optical efficiency. At the same time, the maximum beam parameter product of 25 mm.mrad is achieved.

  6. Pharyngeal pumping continues after laser killing of the pharyngeal nervous system of C. elegans

    Energy Technology Data Exchange (ETDEWEB)

    Avery, L.; Horvitz, H.R. (Massachusetts Institute of Technology, Cambridge (USA))

    1989-10-01

    Using a laser microbeam to kill specific subsets of the pharyngeal nervous system of C. elegans, we found that feeding was accomplished by two separately controlled muscle motions, isthmus peristalsis and pumping. The single neuron M4 was necessary and sufficient for isthmus peristalsis. The MC neurons were necessary for normal stimulation of pumping in response to food, but pumping continued and was functional in MC- worms. The remaining 12 neuron types were also unnecessary for functional pumping. No operation we did, including destruction of the entire pharyngeal nervous system, abolished pumping altogether. When we killed all pharyngeal neurons except M4, the worms were viable and fertile, although retarded and starved. Since feeding is one of the few known essential actions controlled by the nervous system, we suggest that most of the C. elegans nervous system is dispensable in hermaphrodites under laboratory conditions. This may explain the ease with which nervous system mutants are isolated and handled in C. elegans.

  7. Reliable Optical Pump Architecture for Highly Coherent Lasers Used in Space Metrology Applications

    Science.gov (United States)

    Erlig, Herman; Qiu, Yueming; Poberezhskiy, Ilya Y.; Meras, Patrick L.; Chang, Daniel H.; Wu, Yen-Hung

    2012-01-01

    The design and initial demonstration of a laser pump module (LPM) incorporating single-mode, grating-stabilized 808-nm diode lasers and a low-loss, high-port-count optical combiner are completed. The purpose of the developed LPM is to reliably pump an Nd:YAG crystal in the laser head (LH), which serves as the optical metrology source for SIMLite mission. Using the narrow-linewidth, single-mode laser diodes enables placement of the pump power near Nd adsorption peak, which enhances pumping efficiency. Grating stabilization allows for stable pump spectra as diode operating temperature and bias current change. The low-loss, high-port-count optical combiner enables efficient combining of tens of pumps. Overall, the module supports 5+ years of continuous operation at 2 W of pump power with reliability approaching 100 percent. The LPM consists of a laser diode farm (LDF) and a pump beam combiner (PBC). An array of 807- to 808-nm fiber-pigtailed laser diodes makes up the LDF. A Bragg grating in each 5- m core single-mode (SM) fiber pigtail acts to stabilize the lasing spectra over a range of diode operating conditions. These commercially available single-mode laser diodes can deliver up to 150 mW of optical power. The outputs from the multiple pumps in the LDF are routed to the PBC, which is a 37-input by 1-output all-fiber device. The input ports consist of 5- m core SM fiber, while the output port consists of 105- m core, 0.15 NA (numerical aperture) multi-mode (MM) fiber. The combiner is fabricated by fusing the 37 input fibers while simultaneously tapering the fused region. At the completion of this process, the MM fiber is spliced to the end of the adiabatic taper, and, for protection, the combiner is sheathed by a capillary tube. A compact and robust metal housing was designed and fabricated to protect the PBC during space deployment.

  8. Feasibility of an iodine gas laser pumped by concentrated terrestrial solar radiation

    Energy Technology Data Exchange (ETDEWEB)

    Terry, C.K.; Peterson, J.E.; Goswami, D.Y. [Univ. of Florida, Gainesville, FL (United States). Dept. of Mechanical Engineering

    1995-11-01

    A t-C{sub 4}F{sub 9}I iodine gas laser pumped by terrestrial sunlight was analyzed. Lasant properties, spectral terrestrial insolation data, and established laser fundamentals were used to develop a mathematical model of a terrestrial solar-pumped system. Threshold pumping power and available terrestrial pumping power were predicted and used to estimate the solar concentration required to initiate lasing. Laser output power was also predicted. Because this lasant is relatively new and has never been pumped by solar radiation, many physical properties are not well known. An uncertainty analysis was used to predict errors in threshold solar concentration and output power. In all cases, conservative estimates of physical properties were used. The dominant uncertainty in both threshold and output predictions was due to wide variation in published values of the quenching reaction caused by the lasant parent molecule. Several optical and geometric configurations were devised using commercially available primary solar collectors: parabolic or compound parabolic troughs, a Shenandoah-type 7.5 meter diameter parabolic dishes, or a 17 meter diameter stretched membrane dish. Threshold solar concentration for these systems ranged from below 50 to almost 200 suns depending on the laser tube geometry. Output power ranged from below 1 Watt to almost 90 Watts, and was a function of primary collector dimension.

  9. Supercontinuum Generation with Output Power of 1.7 W Pumped by a Picosecond Laser Pulse

    Science.gov (United States)

    Pan, Er-Ming; Ruan, Shuang-Chen; Guo, Chun-Yu; Wang, Yun-Cai; Wei, Hui-Feng

    2010-10-01

    By using a photonic crystal fiber, a supercontinuum source with output power up to 1.7W, pumped by a passively mode-locked diode-pumped Nd:YVO4 picosecond laser is obtained. A spectral width of the supercontinuum is 1700 nm (500-2200 nm) with the 5 dB spectral width approximately 1000 nm (1200-2200 nm). This high power wide band supercontinuum source meets the demand of many applications such as optical coherence tomography, frequency metrology and wavelength-division-multiplexing systems. The evolution of the supercontinuum with the increasing pump power is presented and analyzed.

  10. Polarised two-photon excitation of quantum well excitons for manipulation of optically pumped terahertz lasers

    Energy Technology Data Exchange (ETDEWEB)

    Slavcheva, G., E-mail: gsk23@bath.ac.uk [Blackett Laboratory, Imperial College London, Prince Consort Road, London SW7 2AZ (United Kingdom); Kavokin, A.V., E-mail: A.Kavokin@soton.ac.uk [School of Physics and Astronomy, University of Southampton, Highfield, Southampton SO17 1BJ (United Kingdom); Spin Optics Laboratory, St. Petersburg State University, 1, Ulyanovskaya 198504 (Russian Federation)

    2014-11-15

    Optical pumping of excited exciton states in a semiconductor quantum well embedded in a microcavity is a tool for realisation of ultra-compact terahertz (THz) lasers based on stimulated optical transition between excited (2p) and ground (1s) exciton state. We show that the probability of two-photon absorption by a 2p-exciton is strongly dependent on the polarisation of both pumping photons. Five-fold variation of the threshold power for terahertz lasing by switching from circular to co-linear pumping is predicted. We identify photon polarisation configurations for achieving maximum THz photon generation quantum efficiency.

  11. Laser printed graphene on polyimide electrodes for magnetohydrodynamic pumping of saline fluids

    KAUST Repository

    Khan, Mohammed Asadullah

    2017-08-09

    An efficient, scalable pumping device is reported that avoids moving parts and is fabricated with a cost-effective method. The magnetohydrodynamic pump has electrodes facilely made by laser printing of polyimide. The electrodes exhibit a low sheet resistance of 22.75 Ω/square. The pump is implemented in a channel of 240 mm2 cross-section and has an electrode length of 5 mm. When powered by 7.3 V and 12.43 mA/cm2, it produces 13.02 mm/s flow velocity.

  12. Flashlamp-pumped Ti:Sapphire laser with different rods grown by Czochralski and Verneuil methods

    Science.gov (United States)

    Boquillon, J. P.; Said, J.

    1992-04-01

    The design and the development of a flashlamp-pumped Ti:Sapphire laser is described. Design criteria are discussed and performance improvements using different types of fluorescent UV converters or filters, such as organic dyes or doped glass are presented. We have tested different laser rods at various Ti-concentrations obtained by Verneuil or Czochralski growth techniques. The maximum laser output energy of 540 mJ with a differential efficiency up to 1% was achieved by using only a pyrex filter surrounding the laser rod.

  13. Green electron-beam pumped laser arrays based on II-VI nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Zverev, M.M.; Gamov, N.A.; Zdanova, E.V.; Studionov, V.B.; Peregoudov, D.V. [Moscow State Inst. of Radio Engineering, Electronics and Automations, Moscow (Russian Federation); Ivanov, S.V.; Sedova, I.V.; Gronin, S.V.; Sorokin, S.V.; Kop' ev, P.S. [Ioffe Physical Technical Inst., RAS Polytekhnicheskaya, St. Petersburg (Russian Federation); Olikhov, I.M. [Gamma Co. Ltd., SRC Platan, Fryazino (Russian Federation)

    2010-06-15

    Room temperature electron-beam pumped (U = 15-26 keV) green lasers and laser arrays based on multiple quantum well II-VI structures with an extended up to 2 {mu}m waveguide have been studied. The maximum achieved output pulse power is as high as 31 and 630 W per facet from a single 0.24-mm-wide laser element at the cavity length of 0.4 mm and a laser array consisting of 26 elements, respectively. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  14. End pumped yellow laser performance of Dy3+:ZnWO4

    Science.gov (United States)

    Xia, Zhongchao; Yang, Fugui; Qiao, Liang; Yan, Fengpo

    2017-03-01

    We report an end pumped single transverse-mode (TEM00) yellow laser based on Dy3+:ZnWO4 crystal. The pump light is InGaN blue laser diode at 450 nm with the maximum power of 1.5 W. A 3 cm length Dy3+:ZnWO4 crystal served as the gain medium. By way of the square filter, we discuss the TEM00 properties. In continuous-wave operation and single transverse-mode, a maximum output power of 0.110 W and a slope efficiency of 13.0% are achieved at an emission wavelength of 575 nm.

  15. Determination of Thermal Conductivity of Liquids by a Multi-Point Laser Pump Method

    Institute of Scientific and Technical Information of China (English)

    MA Di; KUO Pao-Kuang; XU Xiao-Dong; ZHANG Shu-Yi

    2007-01-01

    As an advanced optical method, a multi-point pump method is presented for measurements of thermo-physical properties of liquids. Meanwhile, based on the laser-induced thermal grating method, a new theory model is presented and used to analyse the thermal effects caused by the multi-point laser pump, by which the thermal conductivity of liquids can be obtained. The results of some typical liquids, such as water, ethanol and acetone, are presented and are consistent with those of acknowledged values, demonstrating that the multi-point method is simple and useful for characterizing thermal properties of liquids.

  16. Research on fission induced plasmas and nuclear pumped lasers at the Los Alamos Scientific Laboratory

    Science.gov (United States)

    Helmick, H. H.

    1979-01-01

    A program of research on gaseous uranium and uranium plasmas is being conducted at The Los Alamos Scientific Laboratory under sponsorship of the National Aeronautics and Space Administration. The objective of this work is twofold: (1) to demonstrate the proof of principle of a gaseous uranium fueled reactor, and (2) pursue fundamental research on nuclear pumped lasers. The relevancy of the two parallel programs is embodied in the possibility of a high-performance uranium plasma reactor being used as the power supply for a nuclear pumped laser system. The accomplishments in the two above fields are summarized

  17. Spatial Combining of Laser-Diode Beams for Pumping an NPRO

    Science.gov (United States)

    Gelsinger, Paul; Liu, Duncan; Mulder, Jerry; Aguayo, Francisco

    2008-01-01

    A free-space optical beam combiner now undergoing development makes it possible to use the outputs of multiple multimode laser diodes to pump a neodymium-doped yttrium aluminum garnet (Nd:YAG) non-planar ring oscillator (NPRO) laser while ensuring that the laser operates at only a single desired frequency. Heretofore, a Nd:YAG NPRO like the present one has been pumped by a single multimode laser-diode beam delivered via an optical fiber. It would be desirable to use multiple pump laser diodes to increase reliability beyond that obtainable from a single pump laser diode. However, as explained in this article, simplistically coupling multiple multimode laser-diode beams through a fiber-optic combiner would entail a significant reduction in coupling efficiency, and lasing would occur at one or more other frequencies in addition to the single desired frequency. To minimize coupling loss, one must ensure that the NA (approximately equal to 0.3) of the combined laser-diode beams is less than the NA of the fiber. The A(Omega) of the laser-diode beam in the slow-axis plane is 1/1.3 as large as that of the fiber. This A(Omega) is small enough to enable efficient coupling of light into the optical fiber, but too large for combining of beams in the slow-axis plane. Therefore, a pair of cylindrical lenses is used to cancel the slow-axis plane magnification introduced by the on-cylindrical lenses used to effect magnification in the fast-axis plane.

  18. PUMP-TUNING KTP OPTICAL PARAMETRIC OSCILLATOR WITH CONTINUOUS OUTPUT WAVELENGTH PUMPED BY A PULSED TUNABLE Ti:SAPPHIRE LASER

    Institute of Scientific and Technical Information of China (English)

    DING XIN; YAO JIAN-QUAN; YU YI-ZHONG; YU XUAN-YI; XU JING-JUN; ZHANG GUANG-YIN

    2001-01-01

    We report on the implementation of a KTP optical parametric oscillator pumped by a pulsed tunable Ti:sapphire laser. Two major improvements were achieved, including the connection of the signal and idler tuning ranges and the high-output conversion efficiency through the signal and idler tuning ranges. Both in the signal and idler, the continuous output wavelength from 1.261 to 2.532μm was obtained by varying the pump wavelength from 0.7 to 0.98μm. The maximum output pulse energy was 27.2mJ and the maximum conversion efficiency was 35.7% at 1.311μm (signal).

  19. Bragg-Scattering Four-Wave Mixing in Nonlinear Fibers with Intracavity Frequency-Shifted Laser Pumps

    Directory of Open Access Journals (Sweden)

    Katarzyna Krupa

    2012-01-01

    Full Text Available We experimentally study four-wave mixing in highly nonlinear fibers using two independent and partially coherent laser pumps and a third coherent signal. We focus our attention on the Bragg-scattering frequency conversion. The two pumps were obtained by amplifying two Intracavity frequency-shifted feedback lasers working in a continuous wave regime.

  20. Diode end-pumped 1123-nm Nd:YAG laser with 2.6-W output power

    Institute of Scientific and Technical Information of China (English)

    Zhiqiang Cai; Meng Chen; Zhigang Zhang; Rui Zhou; Wuqi Wen; Xin Ding; Jianquan Yao

    2005-01-01

    We present a compact and high output power diode end-pumped Nd:YAG laser which operates at the wavelength of 1123 nm. Continuous wave (CW) laser output of 2.6 W was achieved at the incident pump power of 15.9 W, indicating an overall optical-optical conversion efficiency of 16.4%, and the slope efficiency was 18%.

  1. Highly efficient cascaded P-doped Raman fiber laser pumped by Nd:YVO4 solid-state laser

    Institute of Scientific and Technical Information of China (English)

    Chaohong Huang; Zhiping Cai; Zhengqian Luo; Wencai Huang; Huiying Xu; Chenchun Ye

    2008-01-01

    A highly efficient cascaded P-doped Raman fiber laser (RFL) pumped by a 1064-nm continuous wave (CW) Nd:YVO4 solid-state laser is reported. 1.15-W CW output power at 1484 nm is obtained while the input pump power is 4 W, corresponding to the power conversion efficiency of 28.8%. The threshold pump power for the second-order Stokes radiation is 1.13 W. The slope efficiency is as high as 42.6%. The experimental results are in good agreement with theoretical ones. Furthermore, the power instability of the P-doped RFL at 1484 nm in an hour is observed to be less than 5%.

  2. Comparison of fiber lasers based on distributed side-coupled cladding-pumped fibers and double-cladding fibers.

    Science.gov (United States)

    Huang, Zhihe; Cao, Jianqiu; Guo, Shaofeng; Chen, Jinbao; Xu, Xiaojun

    2014-04-01

    We compare both analytically and numerically the distributed side-coupled cladding-pumped (DSCCP) fiber lasers and double cladding fiber (DCF) lasers. We show that, through optimization of the coupling and absorbing coefficients, the optical-to-optical efficiency of DSCCP fiber lasers can be made as high as that of DCF lasers. At the same time, DSCCP fiber lasers are better than the DCF lasers in terms of thermal management.

  3. Towards jitter-free pump-probe measurements at seeded free electron laser facilities.

    Science.gov (United States)

    Danailov, Miltcho B; Bencivenga, Filippo; Capotondi, Flavio; Casolari, Francesco; Cinquegrana, Paolo; Demidovich, Alexander; Giangrisostomi, Erika; Kiskinova, Maya P; Kurdi, Gabor; Manfredda, Michele; Masciovecchio, Claudio; Mincigrucci, Riccardo; Nikolov, Ivaylo P; Pedersoli, Emanuele; Principi, Emiliano; Sigalotti, Paolo

    2014-06-02

    X-ray free electron lasers (FEL) coupled with optical lasers have opened unprecedented opportunities for studying ultrafast dynamics in matter. The major challenge in pump-probe experiments using FEL and optical lasers is synchronizing the arrival time of the two pulses. Here we report a technique that benefits from the seeded-FEL scheme and uses the optical seed laser for nearly jitter-free pump-probe experiments. Timing jitter as small as 6 fs has been achieved and confirmed by measurements of FEL-induced transient reflectivity changes of Si3N4 using both collinear and non-collinear geometries. Planned improvements of the experimental set-up are expected to further reduce the timing jitter between the two pulses down to fs level.

  4. A solar simulator-pumped gas laser for the direct conversion of solar energy

    Science.gov (United States)

    Weaver, W. R.; Lee, J. H.

    1981-01-01

    Most proposed space power systems are comprised of three general stages, including the collection of the solar radiation, the conversion to a useful form, and the transmission to a receiver. The solar-pumped laser, however, effectively eliminates the middle stage and offers direct photon-to-photon conversion. The laser is especially suited for space-to-space power transmission and communication because of minimal beam spread, low power loss over large distances, and extreme energy densities. A description is presented of the first gas laser pumped by a solar simulator that is scalable to high power levels. The lasant is an iodide C3F7I that as a laser-fusion driver has produced terawatt peak power levels.

  5. Dual-wavelength stable nanosecond pulses generation from cladding-pumped fiber laser

    Institute of Scientific and Technical Information of China (English)

    Shuling Hu; Jing Yu; Chunqing Gao; Guanghui Wei; Fuyun Lü

    2006-01-01

    In this paper, the generation of dual-wavelength stable nanosecond pulses by a laser diode pumped Ybdoped double-clad fiber laser is presented. In the experiment, the fiber laser with two-mirror cavity is approved which operates in a self-Q-switching regime. The Q-switching mechanism is based on stimulatedBrillouin scattering (SBS). When the pump power achieves the SBS threshold, the fiber laser changes from the start resonator to the SBS resonator. With different reflectivities of the second mirror, stable dual-wavelength pulses with the pulse width range from 10 ns to less than 2 ns are obtained. The resultwas explained theoretically by birefringency (including stochastic birefringency and bend birefringency).

  6. 80-W cw TEM{sub 00} IR beam generation by use of a laser-diode-side-pumped Nd:YAG rod laser

    Energy Technology Data Exchange (ETDEWEB)

    Konno, Susumu; Fujikawa, Shuichi; Yasui, Koji [Mitsubishi Electric Corp. Amagasaki, Hyogo (Japan). Advanced Technology R and D Center

    1998-03-01

    We have demonstrated high-efficient and high-power operation of a diode-side-pumped Nd:YAG rod laser. The laser has a simple and scalable configuration consisting of a diffusive pumping reflector and an advanced cavity configuration for polarization-dependent bifocusing compensation. (author)

  7. Dynamics of an erbium-doped fiber laser subjected to harmonic modulation of a diode pump laser

    Science.gov (United States)

    Pisarchik, Alexander N.; Kir'yanov, Alexander V.; Barmenkov, Yuri O.; Reategui, R. J.

    2004-10-01

    An erbium-doped fiber laser is shown to operate as a bistable or multistable nonlinear system under harmonic modulation of the diode pump laser. Phase- and frequency-dependent states are demonstrated both experimentally and in numerical simulations through codimensional-one and codimensional-two bifurcation diagrams in the parameter space of the modulation frequency and amplitude. In particular, generalized bistability results in doubling of saddle-node bifurcation lines where different coexisting attractors born. The laser model describes well all experimental features.

  8. High-speed off-axis holographic cinematography with a copper-vapor-pumped dye laser.

    Science.gov (United States)

    Lauterborn, W; Judt, A; Schmitz, E

    1993-01-01

    A series of coherent light pulses is generated by pumping a dye laser with the pulsed output of a copper-vapor laser at rates of as much as 20 kHz. Holograms are recorded at this pulse rate on a rotating holographic plate. This technique of high-speed holographic cinematography is demonstrated by viewing the bubble filaments that appear in water under the action of a sound field of high intensity.

  9. An Al sub 2 O sub 3 :Ti(3+) laser with microsecond flashlamp pumping

    Energy Technology Data Exchange (ETDEWEB)

    Gorelenko, A.IA.; Demidovich, A.A.; Kalosha, I.I.; Nabatov, V.V.; Sevast' ianov, B.K. (Institut Kristallografii, Moscow (USSR) Institut Fiziki, Minsk (Belorussian SSR))

    1989-12-01

    The paper presents results of the optimization of a flashlamp-pumped Al2O3:Ti(3+) laser using fluorescent light converters. Two types of converters were tested, i.e., a liquid one and a polymeric one using coumarin-30 dye. The maximum laser output energy amounted to 130 mJ with a differential efficiency of 0.4 percent. The wavelength tuning range was from 685 to 920 nm. 6 refs.

  10. Multimode distributed feedback laser emission in a dye-doped optically pumped polymer thin-film

    Science.gov (United States)

    Sobel, F.; Gindre, D.; Nunzi, J.-M.; Denis, C.; Dumarcher, V.; Fiorini-Debuisschert, C.; Kretsch, K. P.; Rocha, L.

    2004-11-01

    We report on particular features of thin film distributed feedback (DFB) lasers. Devices are optically pumped using a Lloyd-mirror interferometer. For a given DFB grating period, the number of lasing modes is film thickness dependent. Spectral content of the devices is analysed using planar waveguide theory. An excellent agreement between the theoretical transverse electric mode structure and the laser emission spectrum is found.

  11. Frequency-stabilized diode-pumped Nd:YAG laser of high power

    Energy Technology Data Exchange (ETDEWEB)

    Taccheo, S.; Laporta, P.; Longhi, S. [CNR, Milano (Italy). Centro di Elettronica Quantistica e Strumentazione Elettronica]|[Politecnico di Milano (Italy). Dipt. di Fisica; Svelto, C. [Politecnico di Milano (Italy). Dipt. di Elettronica e Informazione

    1995-09-01

    The authors describe a frequency-stabilized diode-pumped Nd:YAG laser of high power whose single-mode operation is obtained by suppressing the spatial hole burning through the twisted-mode technique. Active frequency stabilization is achieved by fringe side locking the laser beam to a reference Fabry-Perot cavity. Output power up to 800 mW in single-transverse and -longitudinal mode operation with a linewidth of less than 20 kHz is obtained.

  12. Temperature variation induced by the pulsed-periodic laser pumping under terahertz wave generation

    Science.gov (United States)

    Kitaeva, G. Kh; Moiseenko, E. V.; Shepelev, A. V.

    2017-09-01

    During nonlinear-optical parametric frequency conversion the heat-related effects occur, considerably influencing the conversion process. We develop versatile methods for analytic and numerical calculations of thermo-optical parameters and the temperature distribution inside a non-linear crystal pumped by periodic laser pulses. As an example, numerical results are presented for a number of laser-based schemes actual for the non-linear optical terahertz wave generation and parametric frequency conversion processes.

  13. A 980 nm pseudomorphic single quantum well laser for pumping erbium-doped optical fiber amplifiers

    Science.gov (United States)

    Larsson, A.; Forouhar, S.; Cody, J.; Lang, R. J.; Andrekson, P. A.

    1990-01-01

    The authors have fabricated ridge waveguide pseudomorphic InGaAs/GaAs/AlGaAs GRIN-SCH SQW (graded-index separate-confinement-heterostructure single-quantum-well) lasers, emitting at 980 nm, with a maximum output power of 240 mW from one facet and a 22 percent coupling efficiency into a 1.55-micron single-mode optical fiber. These lasers satisfy the requirements on efficient and compact pump sources for Er3+-doped fiber amplifiers.

  14. Design of high-brightness TEM00-mode solar-pumped laser for renewable material processing

    Science.gov (United States)

    Liang, D.; Almeida, J.

    2014-08-01

    The conversion of sunlight into laser light by direct solar pumping is of ever-increasing importance because broadband, temporally constant, sunlight is converted into laser light, which can be a source of narrowband, collimated, rapidly pulsed, radiation with the possibility of obtaining extremely high brightness and intensity. Nonlinear processes, such as harmonic generation, might be used to obtain broad wavelength coverage, including the ultraviolet wavelengths, where the solar flux is very weak. The direct excitation of large lasers by sunlight offers the prospect of a drastic reduction in the cost of coherent optical radiation for high average power materials processing. This renewable laser has a large potential for many applications such as high-temperature materials processing, renewable magnesium-hydrogen energy cycle and so on. We propose here a scalable TEM00 mode solar laser pumping scheme, which is composed of four firststage 1.13 m diameter Fresnel lenses with its respective folding mirrors mounted on a two-axis automatic solar tracker. Concentrated solar power at the four focal spots of these Fresnel lenses are focused individually along a common 3.5 mm diameter, 70 mm length Nd:YAG rod via four pairs of second-stage fused-silica spherical lenses and third-stage 2D-CPCs (Compound Parabolic Concentrator), sitting just above the laser rod which is also double-pass pumped by four V-shaped pumping cavities. Distilled water cools both the rod and the concentrators. 15.4 W TEM00 solar laser power is numerically calculated, corresponding to 6.7 times enhancement in laser beam brightness.

  15. Reducing temperature dependence of the output energy of a quasi-continuous wave diode-pumped Nd:YAG laser.

    Science.gov (United States)

    Lee, Kangin; Kim, Youngjung; Lee, Sijin; Kwon, Jin Hyuk; Gwak, Jin Seog; Yi, Jonghoon

    2013-08-20

    It is demonstrated by numerical modeling that spectrally dispersed compound pumping diodes and low-loss pumping chamber reduced the temperature dependence of the output energy of quasi-continuous wave diode-pumped Nd:YAG lasers considerably. Several compound diodes with different spectral profiles were tested for pumping. The laser energy was calculated as a function of diode temperature from -30°C to 60°C. When a compound diode with a flat-top spectrum was used for pumping, the mean laser energy was 83% of the maximum energy of a Nd:YAG laser pumped by a diode with a narrow bandwidth. In addition, a compound diode with three emission lines was tested for pumping. When the wavelength gap between the adjacent emission lines of the pumping diode was in the range of 3-10 nm, the mean energy of the Nd:YAG laser became similar to that of a Nd:YAG laser pumped by a diode with a flat-top spectrum.

  16. Reversing the Pump-Dependence of a Laser at an Exceptional Point

    CERN Document Server

    Brandstetter, M; Deutsch, C; Klang, P; Schöberl, J; Türeci, H E; Strasser, G; Unterrainer, K; Rotter, S

    2014-01-01

    When two resonant modes in a system with gain or loss coalesce in both their resonance position and their width, a so-called "Exceptional Point" occurs which acts as a source of non-trivial physics in a diverse range of systems. Lasers provide a natural setting to study such "non-Hermitian degeneracies", since they feature resonant modes and a gain material as their basic constituents. Here we show that Exceptional Points can be conveniently induced in a photonic molecule laser by a suitable variation of the applied pump. Using a pair of coupled micro-disk quantum cascade lasers, we demonstrate that in the vicinity of these Exceptional Points the laser shows a characteristic reversal of its pump-dependence, including a strongly decreasing intensity of the emitted laser light for increasing pump power. This result establishes photonic molecule lasers as promising tools for exploring many further fascinating aspects of Exceptional Points, like a strong line-width enhancement and the coherent perfect absorption ...

  17. Selective removal of dental caries with a diode-pumped Er:YAG laser

    Science.gov (United States)

    Yan, Ruth; Chan, Kenneth H.; Tom, Henry; Simon, Jacob C.; Darling, Cynthia L.; Fried, Daniel

    2015-02-01

    Selective removal of caries lesions with high precision is best accomplished using lasers operating at high pulse repetition rates utilizing small spot sizes. Conventional flash-lamp pumped Er:YAG lasers are poorly suited for this purpose, but new diode-pumped Er:YAG lasers have become available operating at high pulse repetition rates. The purpose of this study was to measure the ablation rate and selectivity of sound and demineralized enamel and dentin for a 30 W diode-pumped Er:YAG laser operating with a pulse duration of 20-30-μs and evaluate it's potential for the selective removal of natural occlusal lesions on extracted teeth. Microradiography was used to determine the mineral content of the demineralized enamel and dentin of 300-μm thick sections with natural caries lesions prior to laser ablation. The ablation rate was calculated for varying mineral content. In addition, near-IR reflectance measurements at 1500-1700- nm were used to guide the laser for the selective ablation of natural occlusal caries lesions on extracted teeth.

  18. Femtosecond laser direct writing of single mode polymer micro ring laser with high stability and low pumping threshold.

    Science.gov (United States)

    Parsanasab, Gholam-Mohammad; Moshkani, Mojtaba; Gharavi, Alireza

    2015-04-01

    We have demonstrated an optically pumped polymer microring laser fabricated by two photon polymerization (TPP) of SU-8. The gain medium is an organic dye (Rhodamine B) doped in SU-8, and the laser cavity is a double coupled microring structure. Single mode lasing was obtained from the two coupled rings each with 30 µm and 29 µm radii using Vernier effect. Low laser threshold of 0.4 µJ/mm(2) is achieved using 1 µm wide polymer waveguides and the quality factor is greater than 10(4) at 612.4 nm wavelength. The lasing remained stable with pump energies from threshold to energies as high as 125 times the threshold.

  19. Transverse effects in a microchip laser with asymmetric end-pumping: modal interference and dynamic instability

    CERN Document Server

    Otsuka, K; Makino, H; Ohtomo, T; Okamoto, A

    2003-01-01

    Formation of complicated emission patterns consisting of many transverse modes and associated intensity pulsations at beat frequencies between some pairs of transverse eigenmodes in microchip solid-state lasers with laser-diode asymmetric end-pumping are reviewed. The dependence of billiard-like transverse patterns on pump power and crystal rotation (i.e. kaleidoscopic patterns) was demonstrated in a 0.3 mm thick thin-slice LiNdP sub 4 O sub 1 sub 2 laser with sheet-like end-pumping. Pump-power-dependent high-speed self-pulsations were observed. The asymmetric optical confinement resulted in the formation of transverse patterns which were totally different from normal Hermite-Gaussian resonator modes. The interference among pairs of non-orthogonal transverse eigenmode fields, whose energy levels exhibited avoided crossing with increasing pump power, was shown to result in high-speed intensity modulations. A good numerical reproduction of the observed high-speed modulations was obtained with model equations. (...

  20. High-brightness, fiber-coupled pump modules in fiber laser applications

    Science.gov (United States)

    Hemenway, Marty; Urbanek, Wolfram; Hoener, Kylan; Kennedy, Keith W.; Bao, Ling; Dawson, David; Cragerud, Emily S.; Balsley, David; Burkholder, Gary; Reynolds, Mitch; Price, Kirk; Haden, Jim; Kanskar, Manoj; Kliner, Dahv A.

    2014-03-01

    High-power, high-brightness, fiber-coupled pump modules enable high-performance industrial fiber lasers with simple system architectures, multi-kW output powers, excellent beam quality, unsurpassed reliability, and low initial and operating costs. We report commercially available (element™), single-emitter-based, 9xx nm pump sources with powers up to 130 W in a 105 μm fiber and 250 W in a 200 μm fiber. This combination of high power and high brightness translates into improved fiber laser performance, e.g., simultaneously achieving high nonlinear thresholds and excellent beam quality at kW power levels. Wavelength-stabilized, 976 nm versions of these pumps are available for applications requiring minimization of the gain-fiber length (e.g., generation of high-peak-power pulses). Recent prototypes have achieved output powers up to 300 W in a 200 μm fiber. Extensive environmental and life testing at both the chip and module level under accelerated and real-world operating conditions have demonstrated extremely high reliability, with innovative designs having eliminated package-induced-failure mechanisms. Finally, we report integrated Pump Modules that provide conveniently formatted for fiber-laser pumping or direct-diode applications; these 19" rack-mountable, 2U units combine the outputs of up to 14 elements™ using fused-fiber combiners, and they include high-efficiency diode drivers and safety sensors.

  1. 1.34μm Nd:YVO4 high efficiency laser end-pumped by diode-laser of flat-concave cavity type

    Institute of Scientific and Technical Information of China (English)

    Shang Lian-Ju; Ning Ji-Ping

    2005-01-01

    The parameters of 1.34μm Nd:YVO4 laser end-pumped with flat-concave cavity are theoretically analysed. The analysis in this paper may be helpful to the designing of kindred lasers. The operation of 1.34μm Nd:YVO4 laser end-pumped by a diode-laser with flat-concave cavity is achieved. The output power of 3.51W at 1.34μm and optical to optical conversion efficiency of 39.0% are obtained at the pump power of 9.0W.

  2. PUMPS

    Science.gov (United States)

    Thornton, J.D.

    1959-03-24

    A pump is described for conveving liquids, particure it is not advisable he apparatus. The to be submerged in the liquid to be pumped, a conduit extending from the high-velocity nozzle of the injector,and means for applying a pulsating prcesure to the surface of the liquid in the conduit, whereby the surface oscillates between positions in the conduit. During the positive half- cycle of an applied pulse liquid is forced through the high velocity nozzle or jet of the injector and operates in the manner of the well known water injector and pumps liquid from the main intake to the outlet of the injector. During the negative half-cycle of the pulse liquid flows in reverse through the jet but no reverse pumping action takes place.

  3. Carrier-Envelope Offset Stabilized Ultrafast Diode-Pumped Solid-State Lasers

    Directory of Open Access Journals (Sweden)

    Stéphane Schilt

    2015-10-01

    Full Text Available Optical frequency combs have been revolutionizing many research areas and are finding a growing number of real-world applications. While initially dominated by Ti:Sapphire and fiber lasers, optical frequency combs from modelocked diode-pumped solid-state lasers (DPSSLs have become an attractive alternative with state-of-the-art performance. In this article, we review the main achievements in ultrafast DPSSLs for frequency combs. We present the current status of carrier-envelope offset (CEO frequency-stabilized DPSSLs based on various approaches and operating in different wavelength regimes. Feedback to the pump current provides a reliable scheme for frequency comb CEO stabilization, but also other methods with faster feedback not limited by the lifetime of the gain material have been applied. Pumping DPSSLs with high power multi-transverse-mode diodes enabled a new class of high power oscillators and gigahertz repetition rate lasers, which were initially not believed to be suitable for CEO stabilization due to the pump noise. However, this challenge has been overcome, and recently both high power and gigahertz DPSSL combs have been demonstrated. Thin disk lasers have demonstrated the highest pulse energy and average power emitted from any ultrafast oscillator and present a high potential for the future generation of stabilized frequency combs with hundreds of watts average output power.

  4. Narrow-line, tunable, high-power diode laser pump for DPAL applications

    Science.gov (United States)

    Pandey, Rajiv; Merchen, David; Stapleton, Dean; Irwin, David; Humble, Chuck; Patterson, Steve; Kissel, Heiko; Biesenbach, Jens

    2013-05-01

    We report on a high-power diode laser pump source for diode-pumped alkali lasers (DPAL), specifically rubidium alkali vapor lasers at 780nm, delivering up to 100W/bar with FWHM spectral line width of 0.06nm (~30GHz). This pump is based on a micro-channel water-cooled stack with collimation in both-axes. Wavelength-locking of the output spectrum allows absorption in one of the very narrow resonance lines of the atomic rubidium alkali vapor. To achieve these results, research was conducted to deliver the highest performance on all key components of the product from the diode laser bar which produces the optical power at 780nm to the external Bragg gratings which narrow the spectrum line width. We highlight the advancements in the epitaxy, device design, beam collimation, grating selection, alignment, tunability and thermal control that enable realization of this novel pump-source for DPALs. Design trade-offs will be presented.

  5. Flashlamp pumped Ti-sapphire laser for ytterbium glass chirped pulse amplification

    Energy Technology Data Exchange (ETDEWEB)

    Nishimura, Akihiko; Ohzu, Akira; Sugiyama, Akira [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment] [and others

    1998-03-01

    A flashlamp pumped Ti:sapphire laser is designed for ytterbium glass chirped pulse amplification. A high quality Ti:sapphire rod and a high energy long pulse discharging power supply are key components. The primary step is to produce the output power of 10 J per pulse at 920 nm. (author)

  6. Picosecond pulse generation from a synchronously pumped mode-locked semiconductor laser diode

    Science.gov (United States)

    Auyeung, J. C.; Johnston, A. R.

    1982-01-01

    A semiconductor laser diode was mode locked in an external cavity when synchronously pumped with 90-ps current pulses. Transform-limited optical pulses with a 10-ps pulse width and a peak power of 160 mW were produced. Operating characteristics of such a system are described.

  7. A kinetic model of the electron-beam-pumped XeCl laser active medium

    Energy Technology Data Exchange (ETDEWEB)

    Boichenko, A.M.; Derzhiev, V.I.; Zhidkov, A.G.; Iakovlenko, S.I. (Institut Obshchei Fiziki, Moscow (USSR))

    1989-02-01

    Kinetic models are developed for XeCl laser active media in different buffer gases (helium, neon, and argon) pumped by an electron beam. In the calculations of the generation characteristics, allowance is made for the effect of the cavity field on the photoinduced transitions. The numerical results on the efficiency are in good agreement with experiments on electron beams. 17 refs.

  8. Grazing Incidence Pumping X-Ray Laser Scheme with Application of Paraboloid Mirrors

    Institute of Scientific and Technical Information of China (English)

    DONG Quan-Li; YAN Fei; ZHANG Jie; ZHONG Jia-Yong; ZHAO Jing; SHENG Zheng-Ming; LI Han-Ming; LI Ying-Jun

    2005-01-01

    @@ A grazing incidence pumping x-ray laser scheme using JIGUANG Ⅱ is proposed. We investigate the characteristics of the focusing of parabolas, and obtain the optimal intensity distributions in the target surfaces with paraboloid mirrors of different parameters by the vectorial ray-tracing.

  9. Locking of self-oscillation frequency by pump modulation in an erbium-doped fiber laser

    Science.gov (United States)

    Pisarchik, A. N.; Barmenkov, Yu. O.

    2005-10-01

    Frequency locking of self-oscillations in a diode-pumped erbium-doped fiber laser by external modulation of the diode current is studied experimentally. The coexistence of locking and unlocking regimes is detected. The condition for onset of the bistability and dependences of the frequency detuning on the modulation frequency and amplitude are established. Transitions to torus-chaos are also demonstrated.

  10. Simulation of a tunable optically pumped terahertz intersubband laser with diluted magnetic semiconductors

    NARCIS (Netherlands)

    Popadić, M.; Milanović, V.; Ikonić, Z.; Indijn, D.

    2006-01-01

    A simulation of an optically pumped laser based on a ZnSe/Zn1−yCdySe double quantum well with a Zn1−xMnxSe diluted magnetic semiconductor barrier is presented. Giant Zeeman splitting in diluted magnetic semiconductors leads to splitting of electronic states, which in turn leads to tunability of lase

  11. New class of compact diode pumped sub 10 fs lasers for biomedical applications

    DEFF Research Database (Denmark)

    Le, T.; Mueller, A.; Sumpf, B.;

    2016-01-01

    Diode-pumping Ti: sapphire lasers promises a new approach to low-cost femtosecond light sources. Thus in recent years much effort has been taken just to overcome the quite low power and low beam qualities of available green diodes to obtain output powers of several hundred milliwatts from a fs-la...

  12. Diode-side-pumped, passively Q-switched Yb:LuAG laser

    Science.gov (United States)

    Kaskow, Mateusz; Galecki, Lukasz; Jabczynski, Jan K.; Skorczakowski, Marek; Zendzian, Waldemar; Sulc, Jan; Nemec, Michal; Jelinkova, Helena

    2015-10-01

    A high-gain, diode-side-pumped Yb:LuAG slab laser was designed and investigated for use at room temperature. Pumping occurred from a fast-axis collimated 2D laser diode stack emitting at a wavelength of 970 nm, with 0.8 J over a duration of 0.8 ms. The pump scheme, which enabled efficient mode matching and high gain, was analysed and experimentally verified for different dopant levels. An energy of 100 mJ with 23% slope efficiency in a near fundamental mode was achieved in the free-running regime. A peak power of 2.5 MW and a pulse energy of 10.1 mJ were demonstrated in passive Q-switching by means of a Cr:YAG saturable absorber with 39% initial transmission. The study defined the indications for optimizing such a system.

  13. End-pumped 1.5 microm monoblock laser for broad temperature operation.

    Science.gov (United States)

    Schilling, Bradley W; Chinn, Stephen R; Hays, A D; Goldberg, Lew; Trussell, C Ward

    2006-09-01

    We describe a next-generation monoblock laser capable of a greater than 10 mJ, 1.5 microm output at 10 pulses/s (pps) over broad ambient temperature extremes with no active temperature control. The transmitter design is based on a Nd:YAG laser with a Cr4+ passive Q switch and intracavity potassium titanyl phosphate optical parametric oscillator. To achieve the repetition rate and efficiency goals of this effort, but still have wide temperature capability, the Nd:YAG slab is end pumped with a 12-bar stack of 100 W (each) diode bars. Different techniques for focusing the pump radiation into the 4.25 mmx4.25 mm end of the slab are compared, including a lensed design, a reflective concentrator, and a lens duct. A wide temperature operation (-20 degrees C to 50 degrees C) for each end-pumped configuration is demonstrated.

  14. Pre-pumped passively Q-switched Nd:YAG/Cr:YAG microchip laser

    Institute of Scientific and Technical Information of China (English)

    Xinning Tian(田信宁); Ping Yan(闫平); Qiang Liu(柳强); Mali Gong(巩马理); Yun Liao(廖云)

    2004-01-01

    A pre-pumped passively Q-switched Nd:YAG/Cr:YAG microchip laser is demonstrated with a peak power of 7.5 kW at pulse repetition rate of serveral kilohertzs. The full-width at half-maximum(FWHM)is 734 ps, and the pulse energy is 5.5 μJ with a fundamental spatial mode. In this system, the pre-pumped microchip laser of Nd:YAG/Cr:YAG wafer which is bonded through the thermal-bonding technique has achieved a time jitter value of 12 μs and a Q-switched amplitude instability of 1.26%(15)through the pre-pumped modulation technique.

  15. An optically pumped GaN/AlGaN quantum well intersubband terahertz laser

    Science.gov (United States)

    Fu, Ai-Bing; Hao, Ming-Rui; Yang, Yao; Shen, Wen-Zhong; Liu, Hui-Chun

    2013-02-01

    We propose an optically pumped nonpolar GaN/AlGaN quantum well (QW) active region design for terahertz (THz) lasing in the wavelength range of 30 μm ~ 40 μm and operating at room temperature. The fast longitudinal optical (LO) phonon scattering in GaN/AlGaN QWs is used to depopulate the lower laser state, and more importantly, the large LO phonon energy is utilized to reduce the thermal population of the lasing states at high temperatures. The influences of temperature and pump intensity on gain and electron densities are investigated. Based on our simulations, we predict that with a sufficiently high pump intensity, a room temperature operated THz laser using a nonpolar GaN/AlGaN structure is realizable.

  16. Design study of high gradient, low impedance accelerating structures for the FERMI free electron laser linac upgrade

    Science.gov (United States)

    Shafqat, N.; Di Mitri, S.; Serpico, C.; Nicastro, S.

    2017-09-01

    The FERMI free-electron laser (FEL) of Elettra Sincrotrone Trieste, Italy, is a user facility driven by a 1.5 GeV 10-50 Hz S-band radiofrequency linear accelerator (linac), and it is based on an external laser seeding scheme that allows lasing at the shortest fundamental wavelength of 4 nm. An increase of the beam energy to 1.8 GeV at a tolerable breakdown rate, and an improvement of the final beam quality is desired in order to allow either lasing at 4 nm with a higher flux, or lasing at shorter wavelengths. This article presents the impedance analysis of newly designed S-band accelerating structures, for replacement of the existing backward travelling wave structures (BTWS) in the last portion of the FERMI linac. The new structure design promises higher accelerating gradient and lower impedance than those of the existing BTWS. Particle tracking simulations show that, with the linac upgrade, the beam relative energy spread, its linear and nonlinear z-correlation internal to the bunch, and the beam transverse emittances can be made smaller than the ones in the present configuration, with expected advantage to the FEL performance. The repercussion of the upgrade on the linac quadrupole magnets setting, for a pre-determined electron beam optics, is also considered.

  17. Pump Diode Characterization for an Unstable Diode-Pumped Alkali Laser Resonator

    Science.gov (United States)

    2013-03-01

    narrowed linewidth. Learning how to control the tuning range of the VBG will permit the fine-tuning of the output frequency of the pump to match the...of commands and their descriptions HINDI get/set toggle indicators on/off HMODEL get harmonic model HO get/set harmonic options HQ get has Q‐switch

  18. Theoretical analysis of thermal effects in fiber laser from the moment when pump is turned on to steady-state

    Institute of Scientific and Technical Information of China (English)

    Zilun Chen; Jing Hou; Zongfu Jiang

    2007-01-01

    A theoretical analysis of the pump-induced temperature change and associated thermal phase shift occurring in a fiber laser is presented. The temperature rise and thermal phase shift from the moment when pump is turned on to steady-state in fiber lasers, such as Yb-doped fiber laser, are numerical calculated.With the same parameters, the numerical solution is in good agreement with the finite-element (ANSYS software) simulation.

  19. Rate equations model and optical external efficiency of optically pumped electrically driven terahertz quantum cascade lasers

    Science.gov (United States)

    Hamadou, A.; Thobel, J.-L.; Lamari, S.

    2016-10-01

    A four level rate equations model for a terahertz optically pumped electrically driven quantum cascade laser is here introduced and used to model the system both analytically and numerically. In the steady state, both in the presence and absence of the terahertz optical field, we solve the resulting nonlinear system of equations and obtain closed form expressions for the levels occupation, population inversion as well as the mid-infrared pump threshold intensity in terms of the device parameters. We also derive, for the first time for this system, an analytical formula for the optical external efficiency and analyze the simultaneous effects of the cavity length and pump intensity on it. At moderate to high pump intensities, we find that the optical external efficiency scales roughly as the reciprocal of the cavity length.

  20. OLET architectures for electrically-pumped organic lasers

    Science.gov (United States)

    Zamboni, R.; Capelli, R.; Toffanin, S.; Murgia, M.; Först, M.; Muccini, M.

    2008-10-01

    Organic light emitting transistors (OLET) have been recently demonstrated as innovative architectures combining into an integrated optoelectronic device multi-functional properties namely, the driving ability of a transistor device with the conversion of electrical current into efficient light emission via electronic relaxation of organic semiconductors. State of the art materials, achievement and performances will be presented and discussed in view of possible OLET architectures exploitation as electrically pumped organic nanolasers.

  1. Synchronously pumped picosecond all-fibre Raman laser based on phosphorus-doped silica fibre.

    Science.gov (United States)

    Kobtsev, Sergey; Kukarin, Sergey; Kokhanovskiy, Alexey

    2015-07-13

    Reported for the first time is picosecond-range pulse generation in an all-fibre Raman laser based on P₂O₅-doped silica fibre. Employment of phosphor-silicate fibre made possible single-cascade spectral transformation of pumping pulses at 1084 nm into 270-ps long Raman laser pulses at 1270 nm. The highest observed fraction of the Stokes component radiation at 1270 nm in the total output of the Raman laser amounted to 30%. The identified optimal duration of the input pulses at which the amount of Stokes component radiation in a ~16-m long phosphorus-based Raman fibre converter reaches its maximum was 140-180 ps.

  2. Side-pumped short rectangular Nd-doped phosphate glass fiber lasers

    Institute of Scientific and Technical Information of China (English)

    Yulong Tang; Yong Yang; Jianqiu Xu

    2008-01-01

    Watt-level short fiber lasers side-pumped through fiber-to-waveguide couplers are demonstrated. The fiber lasers are fabricated from Nd-doped phosphate glass with large numerical aperture of 0.2 and rectangular cross section of 1.5 × 0.5 (mm). Single transverse mode output is achieved by the gain-guiding effect. Average power of 1 W is generated from a 4.0-cm-long fiber laser with a slope efficiency of 10%.

  3. High-Power Diode-Side-Pumped Intracavity-Frequency-Doubled Continuous Wave 532 nm Laser

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yu-Ping; ZHANG Hui-Yun; ZHONG Kai; LI Xi-Fu; WANG Peng; YAO Jian-Quan

    2007-01-01

    @@ An efficient and high-power diode-side-pumped cw 532nm green laser based on a V-shaped cavity geometry, and capable of generating 22.7 W green radiation with optical conversion efficiency of 8.31%, has been demonstrated. The laser is operated with rms noise amplitude of less than 1% and with M2-parameter of about 6.45 at the top of the output power. This laser has the potential for scaling to much higher output power.

  4. Design of a device for pumping a double-clad fiber laser with a laser-diode bar.

    Science.gov (United States)

    Zenteno, L A

    1994-11-01

    Pumping rare-earth-doped double-clad fiber lasers with GaAlAs laser-diode bars typically requires one to transform a 1-cm-long one-dimensional linear array of tens of multimode laser-diode sources into atwo-dimensional oblong cross section that approximately matches the fiber's first cladding shape. I describe the design of a device, henceforth called a high-brightness geometric transformer, that uses a cylindrical microlens to image the laser-diode bar near field onto a linear array of soft-glass, thin-clad, rectangular fibers. In turn, the fibers output ends are arranged to form a stack that matches the required first cladding shape. For a typical laser-diode bar with a brightness of 25 mW·µm(-2)·sr(-1), the geometric transformer output brightness is 0.6 mW·µm(-2)·sr(-1), i.e., there is a 40× intermediate loss of brightness. If the output of the geometric transformer is used to pump a Nd-doped double-clad fiber laser, anoverall brightness gain of 340× can be achieved.

  5. Novel pressure sensor by diode-pumped birefringent Nd:YAG dual-frequency laser

    Science.gov (United States)

    Huang, Chunning; Li, Yan; Zhang, Shulian; Guo, Hui

    2002-09-01

    The prototype of a novel sensor based on laser frequency splitting technology is presented in this paper and the results of a series of experiments are reported. A scheme of the novel pressure sensor by diode-pumped birefringent Nd:YAG dual-frequency laser is brought forward. As a result of the stress birefringence the laser's longitudinal mode is split to two with frequency difference. Both the theoretical analysis and the experiments indicate that there is a direct ratio relation between the frequency difference and the pressure imposed on the Nd:YAG crystal. Therefore when the external pressure is sensed by the Nd:YAG dual-frequency laser and the beat frequency is measured by the frequency counter, the pressure value can be obtained from the magnitude of the beat frequency. The laser can operate under single mode or complex modes with little error to the experiment results. Some research work under different pumping ways is finished and it indicates that the beat frequency has little relation with pumping ways. The experiment has a good linearity (R greater than 0.999) with satisfied precision, sensitivity (5.27 MHz/kPa) and stability, which provides a good academic and experimental foundation for further research.

  6. Development of solar concentrators for high-power solar-pumped lasers.

    Science.gov (United States)

    Dinh, T H; Ohkubo, T; Yabe, T

    2014-04-20

    We have developed unique solar concentrators for solar-pumped solid-state lasers to improve both efficiency and laser output power. Natural sunlight is collected by a primary concentrator which is a 2  m×2  m Fresnel lens, and confined by a cone-shaped hybrid concentrator. Such solar power is coupled to a laser rod by a cylinder with coolant surrounding it that is called a liquid light-guide lens (LLGL). Performance of the cylindrical LLGL has been characterized analytically and experimentally. Since a 14 mm diameter LLGL generates efficient and uniform pumping along a Nd:YAG rod that is 6 mm in diameter and 100 mm in length, 120 W cw laser output is achieved with beam quality factor M2 of 137 and overall slope efficiency of 4.3%. The collection efficiency is 30.0  W/m2, which is 1.5 times larger than the previous record. The overall conversion efficiency is more than 3.2%, which can be comparable to a commercial lamp-pumped solid-state laser. The concept of the light-guide lens can be applied for concentrator photovoltaics or other solar energy optics.

  7. Optimized Biasing of Pump Laser Diodes in a Highly Reliable Metrology Source for Long-Duration Space Missions

    Science.gov (United States)

    Poberezhskiy, Ilya Y; Chang, Daniel H.; Erlig, Herman

    2011-01-01

    Optical metrology system reliability during a prolonged space mission is often limited by the reliability of pump laser diodes. We developed a metrology laser pump module architecture that meets NASA SIM Lite instrument optical power and reliability requirements by combining the outputs of multiple single-mode pump diodes in a low-loss, high port count fiber coupler. We describe Monte-Carlo simulations used to calculate the reliability of the laser pump module and introduce a combined laser farm aging parameter that serves as a load-sharing optimization metric. Employing these tools, we select pump module architecture, operating conditions, biasing approach and perform parameter sensitivity studies to investigate the robustness of the obtained solution.

  8. Modeling of end-pumped Yb:YAG thin-disk lasers with nonuniform temperature distribution.

    Science.gov (United States)

    Zhu, Guangzhi; Zhu, Xiao; Zhu, Changhong; Shang, Jianli; Wan, Hailin; Guo, Fei; Qi, Lijun

    2012-05-10

    A plane wave model with nonuniform temperature distribution in the thin-disk crystal is developed to describe the dynamic behavior of an end-pumped Yb:YAG thin-disk laser. A set of couple-rate equations and 2D stationary heat-conduction equations are derived. The stable temperature distribution in the disk crystal is calculated using a numerical iterative method. The analytic expression is capable of dealing with more practical laser systems than previous works on this subject as it allows for nonuniform temperature distribution in the disk crystal. Based on these results, we examined laser output intensity as a function of pump intensity, dopant concentration, resonator coupler reflectivity, crystal thickness and temperature of cooling liquid.

  9. yb3+-Doped Double-Clad Fibre Laser Pumped by Rectangular Inner Cladding

    Institute of Scientific and Technical Information of China (English)

    宁鼎; 李乙刚; 黄榜才; 孙建军; 吕可诚; 袁树忠; 董孝义

    2001-01-01

    A novel Yb3+-doped double-clad silica fibre with rectangular inner cladding was designed and developed by using the modified chemical vapour deposition process, solution-doping and optical machining all together. The dimensions of the inner cladding are 100 × 70 μm, and Yb3+-doped concentration in the core is about 0.24 wt. %. The operation of the fibre laser pumped by inner cladding is reported. The threshold of the laser is 34mW.When the pump power launched is 141mW, the laser output is 84mW at the wavelength 1075.6nm, and the slope efficiency is 77%.

  10. Multi-coupler side-pumped Yb-doped double-clad fiber laser

    Institute of Scientific and Technical Information of China (English)

    Pan Ou(欧攀); Ping Yan(闫平); Mali Gong(巩马理); Wenlou Wei(韦文楼)

    2004-01-01

    The side-coupler of angle polished method, using angle-polished multimode fiber and optical adhesive, is used to efficiently pump an Yb-doped double-clad fiber laser. The maximum coupling efficiency of 78.6% is achieved by the side-coupler for a multimode fiber with a circular core of 200 μm and a double-clad fiber with a 350/400 μm D-shaped inner cladding. While laser diodes (LDs) with three side-couplers are simultaneously used as pump sources, maximum output power of 1.38 W and slope efficiency of 48.9% are demonstrated in the fiber laser system.

  11. Multi-coupler side-pumped Yb-doped double-clad fiber laser

    Institute of Scientific and Technical Information of China (English)

    欧攀; 闫平; 巩马理; 韦文楼

    2004-01-01

    The side-coupler of angle polished method, using angle-polished multimode fiber and optical adhesive, is used to efficiently pump an Yb-doped double-clad fiber laser. The maximum coupling efficiency of 78.6%is achieved by the side-coupler for a multimode fiber with a circular core of 200 μm and a double-clad fiber with a 350/400 μm D-shaped inner cladding. While laser diodes (LDs) with three side-couplers are simultaneously used as pump sources, maximum output power of 1.38 W and slope efficiency of 48.9% are demonstrated in the fiber laser system.

  12. A Continuous-Wave Diode-Side-Pumped Tm:YAG Laser with Output 51 W

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xiao-Fu; CUI DaFu; XU Zu-Yan; XU Yi-Ting; LI Cheng-Ming; ZONG Nan; XU Jia-Lin; CUI Qian-Jin; LU Yuan-Fu; BO Yong; PENG Qin-Jun

    2008-01-01

    A compact diode-side-pumped Tm:YAG laser is presented, which can output 51 W of cw power at 2.02μm. The Tm:YAG rod is side pumped by nine diode arrays with the central wavelength of 783nm and the with bandwidth of about 2.5 nm at 25℃. To decrease the thermal effect on the both ends and dissipate the heat effectively, one composite Tm:YAG rod with the undoped YAG end caps and the screw threads on the side surface of the rod is used as the laser crystal. The maximum optical-to-optical conversion efficiency of the 2.02-μm laser output is 14.2%, with a slope efficiency of 26.8%.

  13. Study of diode-pumped Yb:YAG disk lasers at low temperature

    Institute of Scientific and Technical Information of China (English)

    Jianlei Wang; Zhenhua Zhang; Xiaojin Cheng; Lei Li; Xiangchun Shi; Xiaolei Zhu; Weibiao Chen

    2011-01-01

    A Yb:YAG disk laser with V-shaped stable resonator and active-mirror configuration, end-pumped by a 940-nm InGaAs laser diode array, is demonstrated. Performances and optimization of the disk laser at low temperature over a range of 130-200 K are investigated theoretically and experimentally. Laser output energy of 1.46 J/pulse operating at 10-Hz repetition rate is obtained with the optimum output coupler transmission of 30%, and the corresponding optical-to-optical efficiency is 48.7%.%Yb:YAG[1-4],by virtue of its high quantum efficiency (>90%),long life time,no concentration quenching,no excite-state absorption,and no upconversion effect,has recently been considered as a suitable candidate for lasers with high average power and high efficiency[5-7].Due to their wide absorption band centered at 941 nm,Yb:YAG lasers are more acceptable for variation of pump laser diode (LD) wavelength.

  14. Low threshold and high efficiency solar-pumped laser with Fresnel lens and a grooved Nd:YAG rod

    Science.gov (United States)

    Guan, Zhe; Zhao, Changming; Yang, Suhui; Wang, Yu; Ke, Jieyao; Gao, Fengbin; Zhang, Haiyang

    2016-11-01

    Sunlight is considered as a new efficient source for direct optical-pumped solid state lasers. High-efficiency solar pumped lasers with low threshold power would be more promising than semiconductor lasers with large solar panel in space laser communication. Here we report a significant advance in solar-pumped laser threshold by pumping Nd:YAG rod with a grooved sidewall. Two-solar pumped laser setups are devised. In both cases, a Fresnel lens is used as the primary sunlight concentrator. Gold-plated conical cavity with a liquid light-guide lens is used as the secondary concentrator to further increase the solar energy concentration. In the first setup, solar pumping a 6mm diameter Nd:YAG rod, maximum laser power of 31.0W/m2 cw at 1064nm is produced, which is higher than the reported record, and the slope efficiency is 4.98% with the threshold power on the surface of Fresnel lens is 200 W. In the second setup, a 5 mm diameter laser rod output power is 29.8W/m2 with a slope efficiency of 4.3%. The threshold power of 102W is obtained, which is 49% lower than the former. Meanwhile, the theoretical calculating of the threshold power and slope efficiency of the solar-pumped laser has been established based on the rate-equation of a four-level system. The results of the finite element analysis by simulation software are verified in experiment. The optimization of the conical cavity by TraceProsoftware and the optimization of the laser resonator by LASCADare useful for the design of a miniaturization solar- pumped laser.

  15. Efficient Pumping Schemes for High Average Brightness Collisional X-ray Lasers

    Energy Technology Data Exchange (ETDEWEB)

    Keenan, R; Dunn, J; Shlyaptsev, V N; Smith, R F; Patel, P K; Price, D F

    2003-10-07

    Advances in transient collisional x-ray lasers have been demonstrated over the last 5 years as a technique for achieving tabletop soft x-ray lasers using 2-10 J of laser pump energy. The high peak brightness of these sources operating in the high output saturation regime, in the range of 10{sup 24}-10{sup 25} ph. mm{sup -2} mrad{sup -2} s-1 (0.1% BW){sup -1}, is ideal for many applications requiring high photon fluence in a single short burst. However, the pump energy required for these x-ray lasers is still relatively high and limits the x-ray laser repetition rate to 1 shot every few minutes. Higher repetition rate collisional schemes have been reported and show some promise for high output in the future. We report a novel technique for enhancing the coupling efficiency of the laser pump into the gain medium that could lead to enhanced x-ray inversion with a factor of ten reduction in the drive energy. This has been applied to the collisional excitation scheme for Ni-like Mo at 18.9 nm and x-ray laser output has been demonstrated. Preliminary results show lasing on a single shot of the optical laser operating at 10 Hz and with 70 mJ in the short pulse. Such a proposed source would have higher average brightness, {approx}10{sup 14} ph. mm{sup -2} mrad{sup -2} s{sup -1} (0.1% BW){sup -1}, than present bending magnet 3rd generation synchrotron sources operating at the same spectral range.

  16. 1.8kW laser diode pumped YAG laser; Shutsuryoku 1.8kW no handotai laser reiki YAG laser

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Toshiba Corporation, as a participant in Ministry of International Trade and Industry`s `photon measurement and processing technology project` since August, 1997, is engaged in the development of an energy-efficient LD (laser diode) pumped semiconductor YAG (yttrium-aluminum-garnet) laser device to be used for welding and cutting. It is a 5-year project and the goal is a mean output of 10kW and efficiency of 20%. In this article, a simulation program is developed which carries out calculation about element technology items such as the tracking of the beam from the pumping LD and the excitation distribution, temperature distribution, thermal stress distribution, etc., in the YAG rod. An oscillator is constructed, based on the results of the simulation, and it exhibits a world-high class continuous laser performance of a 1.8kW output and 13% efficiency. The record of 13% efficiency is five times higher than that achieved by the conventional lamp-driven YAG laser device. (translated by NEDO)

  17. Laser pumping of ions in a cooler buncher

    Energy Technology Data Exchange (ETDEWEB)

    Cheal, B., E-mail: bradley.cheal@manchester.ac.uk [University of Manchester (United Kingdom); Baczynska, K. [University of Birmingham, School of Physics and Astronomy (United Kingdom); Billowes, J.; Campbell, P. [University of Manchester (United Kingdom); Eronen, T. [University of Jyvaeskylae, Department of Physics (Finland); Forest, D. H. [University of Birmingham, School of Physics and Astronomy (United Kingdom); Kessler, T.; Moore, I. D. [University of Jyvaeskylae, Department of Physics (Finland); Rueffer, M. [University of Birmingham, School of Physics and Astronomy (United Kingdom); Tordoff, B. [University of Manchester (United Kingdom); Tungate, G. [University of Birmingham, School of Physics and Astronomy (United Kingdom); Aystoe, J. [University of Jyvaeskylae, Department of Physics (Finland)

    2008-01-15

    Optical experiments at the IGISOL isotope separator facility, Jyvaeskylae, have for many years benefited from the introduction of an ion beam cooler. The device, a gas-filled RF quadrupole, reduces the emittance and longitudinal energy spread of the ion beam. Very recently, use has been made of the axial confinement of slowly travelling ions at the end of the cooler to redistribute the electronic populations through efficient laser excitation. Such a technique has proved beneficial to laser spectroscopic measurements and is a precursor to using the method to polarize the ion beam.

  18. Simulation of medical Q-switch flash-pumped Er:YAG laser

    Energy Technology Data Exchange (ETDEWEB)

    Wang Yanlin; Huang Chuyun; Yao Yucheng; Zou Xiaolin, E-mail: Wangyanlin0@126.com, E-mail: chuyunh@163.com, E-mail: yyuch@soho.com, E-mail: zouxiaol@126.com [Physics school, Hubei University of Technology, Wuhan, China 430068 (China)

    2011-01-01

    Er: YAG laser, the wavelength is 2940nm, can be absorbed strongly by water. The absorption coefficient is as high as 13000 cm{sup -1}. As the water strong absorption, Erbium laser can bring shallow penetration depth and smaller surrounding tissue injury in most soft tissue and hard tissue. At the same time, the interaction between 2940nm radiation and biological tissue saturated with water is equivalent to instantaneous heating within limited volume, thus resulting in the phenomenon of micro-explosion to removal organization. Different parameters can be set up to cut enamel, dentin, caries and soft tissue. For the development and optimization of laser system, it is a practical choice to use laser modeling to predict the influence of various parameters for laser performance. Aim at the status of low Erbium laser output power, flash-pumped Er: YAG laser performance was simulated to obtain optical output in theory. the rate equation model was obtained and used to predict the change of population densities in various manifolds and use the technology of Q-switch the simulate laser output for different design parameters and results showed that Er: YAG laser output energy can achieve the maximum average output power of 9.8W under the given parameters. The model can be used to find the potential laser systems that meet application requirements.

  19. Laser Characteristics of Cladding-Pumped Short Er3+/yb3+ Codoped Single Mode Phosphate Glass Fibre

    Institute of Scientific and Technical Information of China (English)

    XU Shan-Hui; YANG Zhong-Min; XU Wen-Cheng; QIU Dong-Lai; ZHANG Qin-Yuan; JIANG Zhong-Hong

    2009-01-01

    We experimentally investigate the laser characteristics of a ser/es of short pieces of newly-developed Er3+/Yb3+ codoped single mode phosphate glass fibres via the cladding pump of a 976nm multimode laser diode. A stable continuous-wave single transverse mode laser with over 85 m W at 1553 nm is generated from a 5.5-cm-long active fibre. Single mode laser output power per unit length is up to 15 m W/cm. Moreover, the slope efficiency is 11.8% when the pump power is below 940mW and the 3dB linewidth is 0.06nm at the maximum pump power. The numerical simulation results show that the laser emission slope efficiency can exceed 20% by means of increasing the coupling efficiency of the pump to the fibre core further.

  20. Analysis of dual-end-pumped Nd3+-doped index-crossover gain guided-index antiguided fiber laser

    Science.gov (United States)

    Shen, Xiao; Wei, Wei; Zou, Hui; Zhang, Liaolin

    2016-05-01

    A dual-end pumped Nd3+-doped index-crossover gain guided-index antiguided (IGG-IAG) fiber laser is analyzed in theory. Pump light propagation and output laser characteristics are both explored by solving the related rate equations. Simulation results show that pump power confined in the IGG-IAG fiber core is larger and more uniform than that of the gain-guided and index-antiguided(GG-IAG) fiber, and the optimum fiber length and the output power of the IGG-IAG fiber laser are both larger than that of GG-IAG fiber laser. The relationship between threshold pump power and doped concentration, fiber length, fiber radius is researched respectively. The analysis results give out a method for the optimal design of the IGG-IAG fiber laser.

  1. Efficient Laser-Diode End-Pumped Passively Q-Switched Mode-Locked Yb:LYSO Laser Based on SESAM

    Institute of Scientific and Technical Information of China (English)

    XU Shi-Xiang; LI Wen-Xue; HAO Qiang; ZHAI Hui; ZENG He-Ping

    2008-01-01

    We report an eddicient Q-switched laser action based on a semiconductor saturable absorber mirrors(SESAMs)as passively Q-switched laser starter and a Yb:LYSO alloyed crystal as gain material pumped directly by 974nm In GaAs laser diodes.The output pulse duration is measured to be about 7μs,while the average power and the repetition rate of the pulse chain are about 0.92 W and 6.2kHz.respectively,under 12.5 W absorbed pumping power.The Q-switched mode-locked pulse train is also observed in this setup.The laser performance shows that Yb:LYSO is a promising laser gain medium for laser-diode pumped compact solid-state lasers.

  2. Three dimensional structural insight of laser drilled orifices in osmotic pump tablets.

    Science.gov (United States)

    Wu, Li; Wang, Lebing; Wang, Shuxia; Xiao, Tiqiao; Chen, Min; Shao, Qun; York, Peter; Singh, Vikaramjeet; Yin, Xianzhen; Gu, Jingkai; Zhang, Jiwen

    2016-10-10

    The orifice drilled in the membrane as a channel for drug delivery is the key functional part of the osmotic pumps for a controlled drug release system. Reported conventional microscopic evaluations of these orifices have been limited to measurement of two-dimensional cross-section diameters. This study was aimed at establishing a novel method to measure quantitatively the three-dimensional architectures of orifices based on synchrotron radiation X-ray microcomputed tomography (SR-μCT). Quantitative analysis of architectures extracted from captopril osmotic pumps drilled by a range of operating parameters indicated that laser power correlated with the cross section area, volume, surface area and depth of the orifices, while scanning speed of laser beam showed inverse relationships with the above structure characters. The synchrotron radiation based Fourier transform infrared microspectroscopy mapping showed that there was no apparent chemical change in the surrounding area of the orifice compared with the normal membrane region. Thus SR-μCT was successfully applied to marketed felodipine osmotic pumps for architectural evaluation of the orifices. In conclusion, the first three-dimensional structural insight of orifices in osmotic pump tablets by SR-μCT and structural reconstruction for the architectures has provided deeper insight into improving the design of advanced osmotic pumps for controlled drug release.

  3. Continuous-wave and Q-switched performance of an Yb:YAG/YAG composite thin disk ceramic laser pumped with 970-nm laser diode

    Institute of Scientific and Technical Information of China (English)

    Hong Cai; Jun Zhou; Hongming Zhao; Yunfeng Qi; Qihong Lou; Jingxing Dong; Yunrong Wei

    2008-01-01

    Using front face-pumped compact active mirror laser (CAMIL) structure, we have demonstrated an Yb:YAG/YAG composite ceramic disk laser with pumping wavelength at 970 nm. The laser has been operated in both continuous-wave (CW) and Q-switching modes. Under CW operation, laser output power of 1.05 W with 2% transmission output coupler was achieved at the wavelength of 1031 nm. Qswitched laser output was gotten by using an acousto-optic Q-switch. The repetition rate ranged from 1 to 30 kHz and the pulse width varied from 166 to 700 ns.

  4. High Efficient LGp0 End Pumped Nd:YAG Laser

    CSIR Research Space (South Africa)

    Ngcobo, S

    2012-07-01

    Full Text Available The transformation of a single mode TEM00 Gaussian beam by forcing the laser to operate into a symmetrical single mode higher order TEMp0 Laguerre Gaussian beam intensity distribution is very useful in improving and substantially increasing...

  5. 8-mJ TEM(00) diode-end-pumped frequency-quadrupled Nd:YAG laser.

    Science.gov (United States)

    Feugnet, G; Pocholle, J P

    1998-01-01

    A frequency-quadrupled Nd:YAG laser pumped by a commercially available high-brightness stack is described. A master oscillator power amplifier configuration was implanted, and the laser delivered energy of 8 mJ at 0.266microm . The laser was air cooled for easy use.

  6. High-power diode-end-pumped Tm:YLF slab laser delivering 189 W at 1890 nm

    CSIR Research Space (South Africa)

    Koen, W

    2010-09-01

    Full Text Available The authors present a high-power Tm:YLF slab laser double-end-pumped by two 300 W laser diode stacks. The resonator was designed such that the laser emitted at 1890 nm instead of the conventional operating wavelength of 1912 nm. At full incident...

  7. Measurement of thermal lensing in end-pumped Yb-doped yttrium vanadate crystal and sesquioxide laser ceramics

    Science.gov (United States)

    Pestryakov, E. V.; Petrov, V. V.; Trunov, V. I.; Kirpichnikov, A. V.; Merzliakov, M. A.; Laptev, A. V.; Polyakov, K. V.

    2011-02-01

    The results of theoretical and experimental study of thermal lensing in diode-pumped Yb:YVO4 laser crystal, Yb:Y2O3 and Yb:Sc2O3 laser ceramics are presented. Shown, that influence of thermo-lensing effect is necessary to consider for creation of effective high-intensity femtosecond Yb-doped laser systems.

  8. Kinetic model of stimulated emission created by resonance pumping of aluminum laser-induced plasma

    Science.gov (United States)

    Gornushkin, I. B.; Kazakov, A. Ya.

    2017-06-01

    Stimulated emission observed experimentally in an aluminum laser induced plasma is modeled via a kinetic approach. The simulated emission at several cascade transitions is created by a pump laser guided through the plasma at several microseconds after its creation and tuned in resonance with the strong 3s23p-3s24s transition at 266 nm. A two-dimensional space-time collisional radiative plasma model explains the creation of the population inversion and lasing at wavelengths of 2100 n m and 396.1 nm. The population inversion for lasing at 2100 n m is created by depopulation of the ground 3s23p state and population of the 3s25s state via the absorption of the resonant radiation at 266 nm. The population inversion for lasing at 396.1 nm occurs during the laser pulse via the decay of the population of the pumped 3s25s state to the excited 3s24s state via cascade transitions driven optically and by collisions. In particular, efficient are the mixing transitions between neighboring states separated by small gaps on the order of k T at plasma temperatures of 5000-10 000 K. The model predicts that the population inversion and corresponding gain may reach high values even at very moderate pump energy of several μJ per pulse. The efficiency of lasing at 2100 n m and 396.1 nm is estimated to be ˜3% and 0.05%, correspondingly with respect to the pump laser intensity. The gain for lasing at 396.1 nm can reach as high as ˜40 cm-1. The polarization effect that the pump radiation at 266 nm imposes on the stimulated emission at 396.1 nm is discussed. The calculated results are favorably compared to experimental data.

  9. 3.1 kW monolithic MOPA configuration fibre laser bidirectionally pumped by non-wavelength-stabilized laser diodes

    Science.gov (United States)

    Yan, Ping; Huang, Yusheng; Sun, Junyi; Li, Dan; Wang, Xuejiao; Gong, Mali; Xiao, Qirong

    2017-08-01

    We report an all-fibre monolithic master oscillator power amplifier configuration fibre laser bidirectionally pumped by non-wavelength-stabilized laser diodes. The Raman Effect and thermal problems can be effectively suppressed by the bidirectional pumping configuration. A small core diameter double-clad ytterbium-doped fibre is utilized in the amplifier for a refined beam quality control. As a result, a maximum output power of 3122 W and an optical-to-optical efficiency of 81.4% are achieved with near-diffraction-limitation beam quality. No mode instability was detected via a photodiode. Also, the output power instability was measured to be less than 0.6% during a continuous operation of 2 h.

  10. 300 W laser-diode dual-end-pumped Nd:YVO4 Innoslab laser

    Science.gov (United States)

    Duan, Yabo; Song, Chengtian; Mao, Yefei

    2016-09-01

    We demonstrate a continuous wave neodymium-doped vanadate (Nd:YVO4) experiment with the laser diode dual end pumped directly in the band at 880 nm. Due to the advantage of the Innoslab laser, a 22 mm  ×  10 mm  ×  1 mm Nd:YVO4 crystal was used. By using a positive confocal unstable-stable hybrid fold resonator, a maximum power of 330 W was obtained at the absorbed pump power of 725 W. The corresponding optical-to-optical efficiency and slope efficiency were 45.5% and 55.8%, respectively. At an output power of 300 W, the beam quality factors M 2 in the unstable direction and stable direction were 1.7 and 2.1, respectively.

  11. Pump-probe differencing technique for cavity-enhanced, noise-canceling saturation laser spectroscopy

    CERN Document Server

    De Vine, G; Close, J D; Gray, M B; Vine, Glenn de; Clelland, David E. Mc; Close, John D.; Gray, Malcolm B.

    2004-01-01

    We present an experimental technique enabling mechanical-noise free, cavity-enhanced frequency measurements of an atomic transition and its hyperfine structure. We employ the 532nm frequency doubled output from a Nd:YAG laser and an iodine vapour cell. The cell is placed in a traveling-wave Fabry-Perot interferometer (FPI) with counter-propagating pump and probe beams. The FPI is locked using the Pound-Drever-Hall (PDH) technique. Mechanical noise is rejected by differencing pump and probe signals. In addition, this differenced error signal gives a sensitive measure of differential non-linearity within the FPI.

  12. Supercontinuum generation pumped by a regeneratively mode-locked fiber laser

    Institute of Scientific and Technical Information of China (English)

    JIA Dong-fang; TAN Bin; WANG Zhao-ying; GE Chun-feng; NI Wen-jun; LI Shi-chen

    2005-01-01

    Supercontinuum(SC) generation in a dispersion-shifted fiber(DSF) pumped by a 10 GHz regeneratively mode-locked fiber laser(RMLFL) is presented.Optimization of pump wavelength leads to a 20 dB bandwidth of 58.73 nm,which covers the whole C band and part of L band.Using an angle-tuning thin film filter,multi-wavelength and pico-second pulse trains of low chirp could be chosen from the SC spectrum.Amplified spontaneous emission(ASE) induced degeneration of the achieved pulse trains is observed and discussed.

  13. Pulsed pump: Thermal effects in solid state lasers under super-Gaussian pulses

    Indian Academy of Sciences (India)

    H Nadgaran; M Sabaian

    2006-12-01

    Solid state laser (SSL) powers can be realistically scaled when pumped by a real, efficient and multimode pulse. In this work, a fourth-order super-Gaussian pulse was assumed as a pump for SSL's and a complete analytical expression for the thermal phase shift is given. Moreover, the focal length of thermal lens in paraxial ray approximation regime was studied. The results when applied to a Ti : sapphire crystal show an appreciable correction for abberation compared to a top-hat pulse.

  14. Stable, continuous-wave, intracavity, optical parametric oscillator pumped by a semiconductor disk laser (VECSEL).

    Science.gov (United States)

    Stothard, D J M; Hopkins, J-M; Burns, D; Dunn, M H

    2009-06-22

    We report relaxation oscillation free, true continuous-wave operation of a singly-resonant, intracavity optical parametric oscillator (OPO) based upon periodically-poled, MgO-doped LiNbO3 and pumped internal to the cavity of a compact, optically-excited semiconductor disk laser (or VECSEL). The very short upper-laser-state lifetime of this laser gain medium, coupled with the enhancing effect of the high-finesse pump laser cavity in which the OPO is located, enables a low threshold, high efficiency intracavity device to be operated free of relaxation oscillations in continuous-wave mode. By optimizing for low-power operation, parametric threshold was achieved at a diode-laser power of only 1.4 W. At 8.5 W of diode-laser power, 205 mW of idler power was extracted, indicating a total down-converted power of 1.25 W, and hence a down-conversion efficiency of 83%.

  15. Reviews of a Diode-Pumped Alkali Laser (DPAL): a potential high powered light source

    Science.gov (United States)

    Cai, He; Wang, You; Han, Juhong; An, Guofei; Zhang, Wei; Xue, Liangping; Wang, Hongyuan; Zhou, Jie; Gao, Ming; Jiang, Zhigang

    2015-03-01

    Diode pumped alkali vapor lasers (DPALs) were first developed by in W. F. Krupke at the beginning of the 21th century. In the recent years, DPALs have been rapidly developed because of their high Stokes efficiency, good beam quality, compact size and near-infrared emission wavelengths. The Stokes efficiency of a DPAL can achieve a miraculous level as high as 95.3% for cesium (Cs), 98.1% for rubidium (Rb), and 99.6% for potassium (K), respectively. The thermal effect of a DPAL is theoretically smaller than that of a normal diode-pumped solid-state laser (DPSSL). Additionally, generated heat of a DPAL can be removed by circulating the gases inside a sealed system. Therefore, the thermal management would be relatively simple for realization of a high-powered DPAL. In the meantime, DPALs combine the advantages of both DPSSLs and normal gas lasers but evade the disadvantages of them. Generally, the collisionally broadened cross sections of both the D1 and the D2 lines for a DPAL are much larger than those for the most conventional solid-state, fiber and gas lasers. Thus, DPALs provide an outstanding potentiality for realization of high-powered laser systems. It has been shown that a DPAL is now becoming one of the most promising candidates for simultaneously achieving good beam quality and high output power. With a lot of marvelous merits, a DPAL becomes one of the most hopeful high-powered laser sources of next generation.

  16. Power Beaming to Space Using a Nuclear Reactor-Pumped Laser

    Science.gov (United States)

    Lipinski, Ronald J.; Monroe, David K.; Pickard, Paul S.

    1994-07-01

    The present political and environmental climate may slow the inevitable direct utilization of nuclear power in space. In the meantime, there is another approach for using nuclear energy for space power. That approach is to let nuclear energy generate a laser beam in a ground-based nuclear reactor-pumped laser (RPL), and then beam the optical energy into space. Potential space applications for a ground-based RPL include (1) illuminating geosynchronous communication satellites in the earth's shadow to extend their lives, (2) beaming power to orbital transfer vehicles, (3) providing power (from earth) to a lunar base during the long lunar night, and (4) removing space debris. FALCON is a high-power, steady-state, nuclear reactor-pumped laser (RPL) concept which is being developed by the Department of Energy with Sandia National Laboratories as the lead laboratory. The FALCON program has experimentally demonstrated reactor-pumped lasing in various mixtures of xenon, argon, neon, and helium at wavelengths of 585, 703, 725, 1271, 1733, 1792, 2032, 2630, 2650, and 3370 nm with intrinsic efficiency as high as 2.5%. Frequency-doubling the 1733-nm line would yield a good match for photovoltaic arrays at 867 nm. Preliminary designs of an RPL suitable for power beaming have been completed. The MW- class laser is fairly simple in construction, self-powered, closed-cycle (no exhaust gases), and modular. This paper describes the FALCON program accomplishments and power-beaming applications.

  17. Selective removal of dental composite with a diode-pumped Er:YAG laser

    Science.gov (United States)

    Fried, William A.; Chan, Kenneth H.; Darling, Cynthia L.; Fried, Daniel

    2016-02-01

    Selective removal of dental composite with high precision is best accomplished using lasers operating at high pulse repetition rates focused to a small spot size. Conventional flash-lamp pumped Er:YAG lasers are poorly suited for this purpose, but new diode-pumped Er:YAG lasers have become available operating at high pulse repetition rates. The purpose of this study was to compare the ablation rates and selectivity of enamel and composite for a 30 W diode-pumped Er:YAG laser operating with a pulse duration of 30-50-μs and evaluate it's suitability for the selective removal of composite from tooth surfaces. The depth of ablation and changes in surface morphology were assessed using digital microscopy. The fluence range of 30-50 J/cm2 appeared optimal for the removal of composite, and damage to sound enamel was limited to less than 100-μm after the removal of composite as thick as 700-800-μm. Future studies will focus on the use of methods of feedback to further increase selectivity.

  18. Gigahertz frequency comb from a diode-pumped solid-state laser.

    Science.gov (United States)

    Klenner, Alexander; Schilt, Stéphane; Südmeyer, Thomas; Keller, Ursula

    2014-12-15

    We present the first stabilization of the frequency comb offset from a diode-pumped gigahertz solid-state laser oscillator. No additional external amplification and/or compression of the output pulses is required. The laser is reliably modelocked using a SESAM and is based on a diode-pumped Yb:CALGO gain crystal. It generates 1.7-W average output power and pulse durations as short as 64 fs at a pulse repetition rate of 1 GHz. We generate an octave-spanning supercontinuum in a highly nonlinear fiber and use the standard f-to-2f carrier-envelope offset (CEO) frequency fCEO detection method. As a pump source, we use a reliable and cost-efficient commercial diode laser. Its multi-spatial-mode beam profile leads to a relatively broad frequency comb offset beat signal, which nevertheless can be phase-locked by feedback to its current. Using improved electronics, we reached a feedback-loop-bandwidth of up to 300 kHz. A combination of digital and analog electronics is used to achieve a tight phase-lock of fCEO to an external microwave reference with a low in-loop residual integrated phase-noise of 744 mrad in an integration bandwidth of [1 Hz, 5 MHz]. An analysis of the laser noise and response functions is presented which gives detailed insights into the CEO stabilization of this frequency comb.

  19. An end pumped all internal reflection small-sized slab picosecond laser amplifier

    Science.gov (United States)

    Chen, Junchi; Peng, Yujie; Su, Hongpeng; Leng, Yuxin

    2017-05-01

    An end pumped all internal reflection small-sized slab picosecond laser system amplifier is proposed and demonstrated based on the common Nd:YAG crystal. A cylinder lens is introduced to pre-compensate for the one-dimensional thermal effect caused by the high power pumping laser. The maximum output powers of 6.6 and 6.3 W are obtained at the absorbed pumping power of 25 W without and with a cylinder mirror, and the corresponding optical conversion efficiencies are about 10.4% and 9.3% respectively. The measured M 2 factors along the slow and fast axes are 1.71 and 2.47 respectively. The instability of the maximum output laser is below 0.8% (RMS) within measuring time up to 15 min. It is demonstrated that the all internal reflection slab can support long enough optical gain distance to realize the signal laser amplification for the newly developed crystal even with small size and low doped concentration.

  20. Spontaneous Generation of Vortex Array Beams from a Thin-Slice Solid-State Laser with Wide-Aperture Laser-Diode Pumping

    CERN Document Server

    Otsuka, Kenju

    2008-01-01

    We studied complex lasing pattern formations in a thin-slice solid-state laser with wide-aperture laser-diode end-pumping. Radial and rectangular vortex arrays were found to be formed in a controlled fashion with symmetric and asymmetric pump beam profiles, respectively. Most of these vortices exhibited single-frequency oscillations arising from a spontaneous process of transverse mode locking of nearly degenerate modes assisted by the laser nonlinearity. Single-frequency rectangular array beams consisting of a large number of vortices, e.g., closely packed 36 or 46 vortex pixels, were generated, originating from Ince-Gaussian modes excited by the asymmetric pumping.

  1. Pumping laser excited spins through MgO barriers

    Science.gov (United States)

    Martens, Ulrike; Walowski, Jakob; Schumann, Thomas; Mansurova, Maria; Boehnke, Alexander; Huebner, Torsten; Reiss, Günter; Thomas, Andy; Münzenberg, Markus

    2017-04-01

    We present a study of the tunnel magneto-Seebeck (TMS)4 effect in MgO based magnetic tunnel junctions (MTJs). The electrodes consist of CoFeB with in-plane magnetic anisotropy. The temperature gradients which generate a voltage across the MTJs layer stack are created using laser heating. Using this method, the temperature can be controlled on the micrometer length scale: here, we investigate, how both, the TMS voltage and the TMS effect, depend on the size, position and intensity of the applied laser spot. For this study, a large variety of different temperature distributions was created across the junction. We recorded 2D maps of voltages generated by heating in dependence of the laser spot position and the corresponding calculated TMS values. The voltages change in value and sign, from large positive values when heating the MTJ directly in the centre to small values when heating the junction on the edges and even small negative values when heating the sample away from the junction. Those zero crossings lead to very high calculated TMS ratios. Our systematic analysis shows, that the distribution of the temperature gradient is essential, to achieve high voltage signals and reasonable resulting TMS ratios. Furthermore, artefacts on the edges produce misleading results, but also open up further possibilities of more complex heating scenarios for spincaloritronics in spintronic devices.

  2. GaAs-based high temperature electrically pumped polariton laser

    Energy Technology Data Exchange (ETDEWEB)

    Baten, Md Zunaid; Bhattacharya, Pallab, E-mail: pkb@eecs.umich.edu; Frost, Thomas; Deshpande, Saniya; Das, Ayan [Center for Photonic and Multiscale Nanomaterials, Department of Electrical Engineering and Computer Science, University of Michigan, Ann Arbor, Michigan 48109 (United States); Lubyshev, Dimitri; Fastenau, Joel M.; Liu, Amy W. K. [IQE, Inc., 119 Technology Drive, Bethlehem, Pennsylvania 18015 (United States)

    2014-06-09

    Strong coupling effects and polariton lasing are observed at 155 K with an edge-emitting GaAs-based microcavity diode with a single Al{sub 0.31}Ga{sub 0.69}As/Al{sub 0.41}Ga{sub 0.59}As quantum well as the emitter. The threshold for polariton lasing is observed at 90 A/cm{sup 2}, accompanied by a reduction of the emission linewidth to 0.85 meV and a blueshift of the emission wavelength by 0.89 meV. Polariton lasing is confirmed by the observation of a polariton population redistribution in momentum space and spatial coherence. Conventional photon lasing is recorded in the same device at higher pump powers.

  3. Electrically pumped photonic crystal laser constructed with organic semiconductors

    Science.gov (United States)

    Cai, Yuan-yuan; Chen, Xiao; Li, Ning; Li, Chang-wei; Wang, Yi-quan

    2017-03-01

    We experimentally demonstrate the lasing action of electrically pumped octagonal quasi-crystal microcavities formed in a layer of conjugated polymer poly[2-methoxy- 5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) sandwiched between two electrodes. Lasing from a point-defect microcavity is observed at a wavelength of 606 nm with a narrow linewidth of 0.5 nm, limited by the spectrometer resolution. Due to the properties of the photonic bandgap and localization in photonic crystals, the threshold current for lasing is low at 0.8 mA. The ion injection in the luminescent polymer layer by focused ion beam (FIB) etching technology also contributes to enhancement of the carrier density as well as the mobility, resulting in an increase of MEH-PPV conductivity and a decrease of turn-on voltage.

  4. Development of high-brightness high-power fiber laser pump sources

    Science.gov (United States)

    Priest, J. A.; Faircloth, Brian O.; Swint, Reuel B.; Coleman, James J.; Forbes, David V.; Zediker, Mark S.

    2004-06-01

    High power fiber lasers have strong potential for use in both commercial and military applications. Improved wall plug efficiency over Nd:YAG and CO2 lasers combined with up to a 10-fold improvement in beam quality, make fiber lasers extremely attractive for industrial applications such as welding and cutting. In military applications, fiber lasers offer a simplified logistic train, a deep magazine limited only by electric power, and a compact footprint, allowing theater defense and self-protection of combat platforms with speed of light engagement and flexible response. Commercial viability of these systems, however, is limited by the availability of compact, cost effective, and reliable diode laser pump sources in the multi-kilowatt regime. The relatively low brightness of diode laser sources has complicated the task of building high power pumps at a reasonable cost. In response to this need, Nuvonyx, Inc. in conjunction with the University of Illinois at Urbana-Champaign, has been developing a new technology for producing high power, single lateral mode devices which do not suffer form the instabilities mentioned above. The waveguide consists of a narrow section, approximately 2 μm wide, which flares to approximately 12 μm wide at the output facet. The flaring of the waveguide increases the gain volume and reduces the optical power density at the facet allowing for higher output power capability. The index guide is defined using an epitaxial process which allows the confinement of the mode to be reduced as the width of the guide expands. Thus, the mode is confined in a single mode waveguide throughout the cavity maintaining stability of the mode to the emitting facet. In November 2002, Nuvonyx, Inc. was awarded a contract with the Air Force Research Lab, Kirtland AFB, Albuquerque, NM, to transition these devices to production quality for use in high-power fiber laser pumps. Partnered with Alfalight, Inc. and the University of Illinois, we have begun initial

  5. Compact, diode-pumped, solid-state lasers for next generation defence and security sensors

    Science.gov (United States)

    Silver, M.; Lee, S. T.; Borthwick, A.; McRae, I.; Jackson, D.; Alexander, W.

    2015-06-01

    Low-cost semiconductor laser diode pump sources have made a dramatic impact in sectors such as advanced manufacturing. They are now disrupting other sectors, such as defence and security (D&S), where Thales UK is a manufacturer of sensor systems for application on land, sea, air and man portable. In this talk, we will first give an overview of the market trends and challenges in the D&S sector. Then we will illustrate how low cost pump diodes are enabling new directions in D&S sensors, by describing two diode pumped, solid- state laser products currently under development at Thales UK. The first is a new generation of Laser Target Designators (LTD) that are used to identify targets for the secure guiding of munitions. Current systems are bulky, expensive and require large battery packs to operate. The advent of low cost diode technology, merged with our novel solid-state laser design, has created a designator that will be the smallest, lowest cost, STANAG compatible laser designator on the market. The LTD delivers greater that 50mJ per pulse up to 20Hz, and has compact dimensions of 125×70×55mm. Secondly, we describe an ultra-compact, eye-safe, solid-state laser rangefinder (LRF) with reduced size, weight and power consumption compared to existing products. The LRF measures 100×55×34mm, weighs 200g, and can range to greater than 10km with a single laser shot and at a reprate of 1Hz. This also leverages off advances in laser pump diodes, but also utilises low cost, high reliability, packaging technology commonly found in the telecoms sector. As is common in the D&S sector, the products are designed to work in extreme environments, such as wide temperature range (-40 to +71°C) and high levels of shock and vibration. These disruptive products enable next- generation laser sensors such as rangefinders, target designators and active illuminated imagers.

  6. SUBJOULE DIODE-PUMPED YTTERBIUM-ERBIUM GLASS LASER WITH CAVITY DUMPING FOR CATARACT EXTRACTION

    Directory of Open Access Journals (Sweden)

    A. V. Belikov

    2015-11-01

    Full Text Available Subject of Study. The paper discusses the breadboarding results of compact diode pumped laser. The laser is based on Yb,Er:glass slab active element and frustrated total internal reflection (FTIR shutter and features of the impact of generated pulses at the water-containing media. The transmitter working in cavity dumping mode provides generation of single microsecond pulses or regular trains of these pulses with peak power up to 100 kW and average output power up to 8 W. The laser allows varying output parameters of radiation in wide range and is designed for the usage in technology and biomedical applications. The possibilities of the laser radiation parameters adapting for application in a compact laser cataract extraction complex are examined. Method. The energy efficient for three level active medium method of lasing pulses repetition rate increasing was investigated, which comprises the generation of pulse trains by several FTIR shutter switching on one pump pulse. We carried out analysis of application possibility for microsecond laser pulses with peak power of tens of kilowatts at wavelength of 1,54 μm in the processing of water-containing tissues. The acoustic response on the interaction of radiation with a model environment was studied. Main Results. In the modulation mode of useful (active losses lasing pulses have been obtained with microsecond duration and energy more than 100 mJ and trains of pulses with total energy of 0,5 J at the effective pulse repetition rate of more than 50 Hz. The minimal permissible period of laser pulses in train (300 μs has been established experimentally on the basis of optoacoustic studies. It meets the criteria of operation noninvasiveness consisting in prevention of the risk of posterior lens capsule damage with laser radiation. Practical Relevance. The results obtained with the layout of diode pumped Yb,Er:glass laser with cavity dumping and slab active element are presently record for diode-pumped

  7. Numerical simulation of end-pumped CW Nd3+: GdVO4 laser at 1063 nm

    Institute of Scientific and Technical Information of China (English)

    Zu Ning-Ning; Sun Gui-Juan; Dai Zhen-Wen

    2008-01-01

    A theoretical model to simulate an end-pumped CW Nda+:GdVO4 laser at 1063nm is presented.Its essence is to use the propagation equations to demonstrate the spatial evolutions of the pump and the laser powers in the cavity,hence it is applicable to both low and high gain lasers.The simulation results obtained by this model are in good agreement with the experimental observations reported in the literature for a Ti:sapphire-pumped Nd3+:GdVO4 laser.Moreover,some parameters,such as the reflectivity of output coupler,the spot size of laser beam and the crystal length,are discussed with a view to optimizing the laser performance.

  8. Linearly polarized pumped passively Q-switched Nd:YVO4 microchip laser for Ince-Gaussian laser modes with controllable orientations

    Science.gov (United States)

    He, Hong-Sen; Zhang, Ming-Ming; Dong, Jun; Ueda, Ken-Ichi

    2016-12-01

    A tilted, linearly polarized laser diode end-pumped Cr4+:YAG passively Q-switched a-cut Nd:YVO4 microchip laser for generating numerous Ince-Gaussian (IG) laser modes with controllable orientations has been demonstrated by selecting the crystalline orientation of an a-cut Nd:YVO4 crystal. The same IG laser mode with different orientations has been achieved with the same absorbed pump power in a passively Q-switched Nd:YVO4 microchip laser under linearly polarized pumping when the incident pump power and the crystalline orientation of an a-cut Nd:YVO4 crystal are both properly selected. The significant improvement of pulsed laser performance of controllable IG modes has been achieved by selecting the crystalline orientation of an a-cut Nd:YVO4 crystal. The maximum pulse energy is obtained along the a-axis of an a-cut Nd:YVO4 crystal and the highest peak power is achieved along the c-axis of an a-cut Nd:YVO4 crystal, respectively, which has potential applications on quantum computation and optical manipulation. The generation of controllable IG laser modes in microchip lasers under linearly polarized pumping provides a convenient and universal way to control IG laser mode numbers with anisotropic crystal as a gain medium.

  9. Erbium Doped GaN Lasers by Optical Pumping

    Science.gov (United States)

    2016-07-13

    control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. Texas Technical University Box 41035 349 Admin Bldg Lubbock, TX 79409 -1035...obtained via growth by hydride vapor phase epitaxy (HVPE) in conjunction with a laser-lift-off (LLO) process . An Er doping level of 1.4 × 10^20 atoms/cm3...GPA to 4.0 (4.0 max scale): Number of graduating undergraduates funded by a DoD funded Center of Excellence grant for Education , Research and

  10. Big solar furnace as pumping source for high power lasers

    Science.gov (United States)

    Payziyev, Sh.; Bakhramov, S.; Klichev, Sh.; Kasimov, A.; Riskiev, T.; Abdurakhmanov, A.; Fazilov, A.

    2008-02-01

    For effective conversion of the energy of the concentrated solar flux of 1 MW Big Solar Furnace of the Scientific and Production Association "Physics-Sun" (Tashkent) with focal spot size of about 40 cm into the coherent laser radiation, the several designs of the multi-element secondary concentrators for various active mediums with different thermal and optical characteristics were considered. For calculations of parameters of secondary concentrators the Ray tracing and Monte-Carlo methods were used and the numerical experiments were performed.

  11. XeF pump laser. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    1980-03-01

    The goal of this program was to demonstrate operation of an XeF laser of adequate energy, efficiency and beam quality at high repetition rates. The specific design goals were: PRF greater than or equal to 10 kHz, energy output greater than or equal to 50 mJ/pulse, efficiency greater than or equal to 0.3%, and beam divergence angle less than or equal to 20x diffraction limited. In the following sections of this report we will discuss how these goals have been met.

  12. Dynamical Properties of a Single-Mode Laser Driven by Quadratic Pump Noise

    Institute of Scientific and Technical Information of China (English)

    ZHANG Li; CAO Li

    2007-01-01

    We propose a single-mode laser model driven by quadratic pump noise with cross correlation between the real and imaginary parts of the pump noise. The effect of the cross-correlation coefficient λp between the real and imaginary parts of the pump noise on dynamical properties is studied by using of the linear approximation. The theoretical expressions of intensity correlation function λ(t), normalized intensity fluctuation λ(0) are calculated.It is found that the most conspicuous effects of λp on both the intensity correlation function and the normalized intensity fluctuation appear at |λp| = √0.5, but not at |λp| = 1.

  13. Gigahertz dual-comb modelocked diode-pumped semiconductor and solid-state lasers

    Science.gov (United States)

    Link, S. M.; Mangold, M.; Golling, M.; Klenner, A.; Keller, U.

    2016-03-01

    We present a simple approach to generate simultaneously two gigahertz mode-locked pulse trains from a single gain element. A bi-refringent crystal in the laser cavity splits the one cavity beam into two cross-polarized and spatially separated beams. This polarization-duplexing is successfully demonstrated for both a semiconductor disk laser (i.e. MIXSEL) and a diode-pumped solid-state Nd:YAG laser. The beat between the two beams results in a microwave frequency comb, which represents a direct link between the terahertz optical frequencies and the electronically accessible microwave regime. This dual-output technique enables compact and cost-efficient dual-comb lasers for spectroscopy applications.

  14. Micro-Welding of Copper Plate by Frequency Doubled Diode Pumped Pulsed Nd:YAG Laser

    Science.gov (United States)

    Nakashiba, Shin-Ichi; Okamoto, Yasuhiro; Sakagawa, Tomokazu; Takai, Sunao; Okada, Akira

    A pulsed laser of 532 nm wavelength with ms range pulse duration was newly developed by second harmonic generation of diode pumped pulsed Nd:YAG laser. High electro-optical conversion efficiency more than 13% could be achieved, and 1.5 kW peak power green laser pulse was put in optical fiber of 100 μm in diameter. In micro- welding of 1.0 mm thickness copper plate, a keyhole welding was successfully performed by 1.0 kW peak power at spot diameter less than 200 μm. The frequency doubled pulsed laser improved the processing efficiency of copper welding, and narrow and deep weld bead was stably obtained.

  15. Simulation model of a new solar pumped laser system of Fresnel lens in Helwan of Egypt

    Directory of Open Access Journals (Sweden)

    Yasser A. Abdel-Hadi

    2012-12-01

    Full Text Available A simulation model of a new solar pumped laser system is tested to be run in Helwan in Egypt as an example of an industrial polluted area. The system is based on concentrating the solar radiation using a Fresnel lens on a laser head fixed on a mount tracking the sun during the day and powered by a DC battery. The model is fed by real solar radiation data in the various seasons in order to know the laser power got from such a system in those conditions. The results showed that the output laser power obtained from this system can be up to 6.2 W in spring, 6.8 W in summer, 2.2 W in autumn and 0.4 W in winter.

  16. Dynamic properties of a pulse-pumped fiber laser with a short, high-gain cavity

    Science.gov (United States)

    Yang, Chaolin; Guo, Junhong; Wei, Pu; Wan, Hongdan; Xu, Ji; Wang, Jin

    2016-09-01

    We demonstrate a pulsed high-gain all-fiber laser without intracavity modulators, where a short and heavily Erbium-doped fiber is used as the gain medium in a ring cavity. By pulsed-pumping this short high gain cavity and tuning an intracavity variable optical coupler, the laser generates optical pulses with a pulse-width of μs at a repetition rate in the order of kHz down to one-shot operation. Furthermore, dynamic properties of this laser are investigated theoretically based on a traveling-wave-model, in which an adaptive-discrete-grid-finite-difference-method is applied. The simulation results validate the experimental results. The demonstrated pulsed laser is compact, flexible and cost-effective, which will have great potential for applications in all-optical sensing and communication systems.

  17. Optically Pumped Atomic Rubidium Lasers: Two-Photon and Exciplex Excitation Mechanisms

    Science.gov (United States)

    Gallagher, Jeffrey E.

    The Doppler-broadened two-photon absorption (TPA) cross-section for the 52S1/2 → 52 D5/2 transition in Rb is measured using direct absorption methods. The selection rule |DeltaF| ≤ 2 applied to both isotopes yields 17 transitions in 3 Doppler limited lines. A detailed model of the intensity profile was also developed to account for a focused Gaussian beam (with an M2 value of 1.09) propagating through a two-photon absorption medium. A peak absorbance of 24% was observed for an intensity of 6.28 kWcm2 at the focus, a Rb density of 4.6x1015 cm-3 , and a path length of 15 cm. Alkali concentrations from 1.61 - 8.52x1015 cm -3 were monitored in the far wing of the D 2 line. Extracting the hyperfine-broadened TPA cross-section from 87 test configurations, while varying the pump power, alkali concentration and focal length, yielded an error-weighted average of 6.75x10^-21 cm4W with a standard deviation of 3.61x10-21 cm4W. This cross-section is sufficient for a pulsed dye laser to bleach the pump transition in the Two-Photon Pumped Alkali Laser (TPAL) that lases at 420 nm and 5.2 microm. Optically pumped atomic rubidium lasers pumped in the blue satellite of the D2 line from the ground Rb-Ar or Rb-Kr collision pair to the dissociative B2S+1/2 state produce laser emission at 780.2 nm. Lasing is achieved for pump wavelengths of 752.3 to greater than 760 nm for the Rb-Ar system and 757.1 -- 760.4 nm for the Rb-Kr system. Slope efficiencies increase with both Rb and Ar concentrations and exceed 0.25% using a heat pipe configuration. The gain is very high with photon build-up times of 1--3.7 ns. Laser induced heating and subsequent condensation of alkali vapor in the heat pipe configuration currently limits operation to less than 2500 Torr.

  18. Laser Velocimeter Measurements in the Pump of an Automotive Torque Converter Part II – Effect of Pump Speed and Oil Viscosity

    Directory of Open Access Journals (Sweden)

    Ronald D. Flack

    2000-01-01

    Full Text Available The velocity field inside a torque converter pump was studied for two separate effects: variable pump rotational speed and variable oil viscosity. Three-dimensional velocity measurements were taken using a laser velocimeter for both the pump mid- and exit planes. The effect ofvariable pump rotational speed was studied by running the pump at two different speeds and holding speed ratio (pump rotational speed]turbine rotational speed constant. Similarly, the effect of viscosity on the pump flow field was studied by varying the temperature and]or using two different viscosity oils as the working fluid in the pump. Threedimensional velocity vector plots, through-flow contour plots, and secondary flow profiles were obtained for both pump planes and all test conditions. Results showed that torque converter mass flows increased approximately linearly with increasing pump rotational speed (and fixed speed ratio but that the flow was not directly proportional to pump rotational speed. However, mass flows were seen to decrease as the oil viscosity was decreased with a resulting increased Reynolds number; for these conditions the high velocity regions were seen to decrease in size and low velocity regions were seen to increase in size. In the pump mid-plane strong counter-clockwise secondary flows and in the exit plane strong clockwise secondary flows were observed. The vorticities and slip factors were calculated from the experimental results and are presented. The torque core-to-shell and blade-to-blade torque distributions were calculated for both planes. Finally, the flow fields were seen to demonstrate similitude when Reynolds numbers were matched.

  19. Spectroscopic properties and laser performance of resonantly-pumped cryo-cooled Er³⁺:GdVO₄.

    Science.gov (United States)

    Ter-Gabrielyan, N; Fromzel, V; Ryba-Romanowski, W; Lukasiewicz, T; Dubinskii, M

    2012-03-12

    We report a highly efficient cryo-cooled eye-safe laser operation of a resonantly-pumped (in-band) Er³⁺:GdVO₄ single crystal. The maximum continuous wave (CW) power of 10.3 W with 84% slope efficiency was achieved at 1598.7 with pumping at 1538.6 nm by a spectrally-narrowed Er-fiber laser. Under the 1529 nm resonant pumping by a commercially available diode bar stack operating in a quasi-CW (QCW) mode, the laser delivered 37 W of output power with 68% slope efficiency. This is believed to be the first reported cryo-cooled Er³⁺:GdVO₄ laser, resonantly-pumped into the ⁴I₁₅/₂ →⁴I₁₃/₂ transition.

  20. Resonantly pumped continuous-wave mode-locked Ho:YAP laser

    Science.gov (United States)

    Duan, X. M.; Lin, W. M.; Cui, Z.; Yao, B. Q.; Li, H.; Dai, T. Y.

    2016-04-01

    In this paper, we report a continuous-wave mode-locked Ho:YAP laser for the first time to our knowledge. Mode-locked pulse was produced by using an acousto-optic modulator. A 1.91-μm Tm-fiber laser as the pump source, at incident pump power of 25.9 W, the maximum output power of 2.87 W at 2117.8 nm was achieved in continuous-wave mode-locked regime. Pulse as short as 254.8 ps was obtained at repetition frequency of 81.52 MHz. In addition, the beam quality factor M 2 value of 1.6 was obtained.

  1. Laser pumping Cs atom magnetometer of theory research based on gradient tensor measuring

    Energy Technology Data Exchange (ETDEWEB)

    Yang Zhang; Chong Kang; Wang Qingtao; Lei Cheng; Zheng Caiping, E-mail: zhangyang@hrbeu.edu.cn [College of Science, Harbin Engineering University, Harbin 150001 (China)

    2011-02-01

    At present, due to space exploration, military technology, geological exploration, magnetic navigation, medical diagnosis and biological magnetic fields study of the needs of research and development, the magnetometer is given strong driving force. In this paper, it will discuss the theoretical analysis and system design of laser pumping cesium magnetometer, cesium atomic energy level formed hyperfine structure with the I-J coupling, the hyperfine structure has been further split into Zeeman sublevels for the effects of magnetic field. To use laser pump and RF magnetic field make electrons transition in the hyperfine structure to produce the results of magneto-optical double resonance, and ultimately through the resonant frequency will be able to achieve accurate value of the external magnetic field. On this basis, we further have a discussion about magnetic gradient tensor measuring method. To a large extent, it increases the magnetic field measurement of information.

  2. Pulsed laser noise analysis and pump-probe signal detection with a data acquisition card.

    Science.gov (United States)

    Werley, Christopher A; Teo, Stephanie M; Nelson, Keith A

    2011-12-01

    A photodiode and data acquisition card whose sampling clock is synchronized to the repetition rate of a laser are used to measure the energy of each laser pulse. Simple analysis of the data yields the noise spectrum from very low frequencies up to half the repetition rate and quantifies the pulse energy distribution. When two photodiodes for balanced detection are used in combination with an optical modulator, the technique is capable of detecting very weak pump-probe signals (ΔI/I(0) ~ 10(-5) at 1 kHz), with a sensitivity that is competitive with a lock-in amplifier. Detection with the data acquisition card is versatile and offers many advantages including full quantification of noise during each stage of signal processing, arbitrary digital filtering in silico after data collection is complete, direct readout of percent signal modulation, and easy adaptation for fast scanning of delay between pump and probe.

  3. ZnSe-based laser structures for electron-beam pumping with graded index waveguide

    Energy Technology Data Exchange (ETDEWEB)

    Sorokin, S.V.; Sedova, I.V.; Ivanov, S.V. [Ioffe Physico-Technical Institute, Polytekhnicheskaya 26, St. Petersburg 194021 (Russian Federation); Zdanova, E.V.; Zverev, M.M. [Moscow State Institute of Radio Engineering, Electronics and Automations, Moscow 117454 (Russian Federation); Gronin, S.V.

    2010-06-15

    Electron beam pumped (EBP) laser heterostructures with graded index waveguide (GIW) have been grown by molecular beam epitaxy and studied in detail. The maximum achieved output pulse power per facet is as high as 8.5 W at an electron beam energy of 16 kV. No saturation of output power with the increase of electron beam current as well as no suitable degradation of GIW EBP laser structures have been observed. The ways for further optimizations of GIW heterostructures are discussed. (copyright 2010 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  4. 10-W cladding-pumped fiber laser with single transverse mode output

    Institute of Scientific and Technical Information of China (English)

    Ping Yan(闰平); Mali Gong(巩马理); Pan Ou(欧攀); Wenlou Wei(韦文楼); Ruizhen Cui(崔瑞贞); Qiang Liu(柳强); Weipu Jia(贾维溥)

    2003-01-01

    A Yb-doped double-clad fiber laser is demonstrated with a measured power output of 10.6 W and a fundamental spatial mode. The optical-to-optical conversion efficiency is 44% and the slope efficiency is 86% closed to quantum efficiency of optical conversion. In our laser system, a D-shape (340 μm/400 μm) inner cladding Yb-doped fiber is used as the gain material within the Fabry-Perot cavity. Multimode diode pump radiation is injected into the cladding through an end facet of the composite fiber.

  5. Room-temperature cw operation of an efficient miniaturized Nd:YAG laser end-pumped by a superluminescent diode

    Energy Technology Data Exchange (ETDEWEB)

    Washio, K.; Iwamoto, K.; Inoue, K.; Hino, I.; Matsumoto, S.; Saito, F.

    1976-12-01

    A miniaturized Nd:YAG laser is described, in which a 3-mm-diam x 5.4-mm-long laser rod is end-pumped by a single Al/sub x/Ga/sub 1-x/As superluminescent diode (SLD) having 20-..mu..m x 1.4-nm stripe geometry. A 4.5-mW laser power was obtained at room temperature in a 1-ms pulse operation. Emitted power from the SLD was 50 mW with 1.7% external power efficiency. When continuously pumped, a 1.5-mW laser power was obtained at room temperature. (AIP)

  6. Diode-pumped Er:CaF2 ceramic 2.7 μm tunable laser.

    Science.gov (United States)

    Sulc, Jan; Němec, Michal; Svejkar, Richard; Jelínková, Helena; Doroshenko, Maxim E; Fedorov, Pavel P; Osiko, Vyacheslav V

    2013-09-01

    Spectroscopic and laser properties of a newly developed high optical quality Er:CaF2 hot-formed ceramic were investigated. Under pulsed 968 nm laser diode pumping, the mid-infrared (2.7 μm) radiation was obtained with a slope efficiency of 3%. Laser tunability was reached using a birefringent filter and the laser tuning range of 118 nm, from 2687 up to 2805 nm, was demonstrated. The maximal output energy reached was 0.48 mJ at 2730 nm for the absorbed pumping energy 34 mJ.

  7. LD-pumped Nd:YVO sub 4 frequency-doubled by CPM LBO laser at 671 nm

    CERN Document Server

    Zheng Quan; Qian Long Sheng; Zhao Ling

    2001-01-01

    A design of LD-pumped high efficient Nd:YVO sub 4 /LBO red laser is reported. Using critical phase-matching LBO for the first time, 671 nm red laser is obtained by 1.342 mu m intracavity frequency doubling. With 800 mW incident pump laser, 52 mW and 97 mW TEM00 mode red laser output are obtained by II-typed and I-typed LBO. The optical-to-optical conversions are up to 6.5% and 12.1% respectively

  8. Numerical Modelling of QCW-Pumped Passively Q-Switched Nd:YAG Lasers with Cr4+:YAG as Saturable Absorber

    Institute of Scientific and Technical Information of China (English)

    WANG Yu-Ye; XU De-Gang; XIONG Jing-Ping; WANG Zhuo; WANG Peng; YAO Jian-Quan

    2008-01-01

    @@ Passively Q-switched quasi-continuous-wave (QCW) diode-pumped Nd:YAG laser with Cr4+:YAG as saturable absorber is numerically investigated by solving the coupled rate equations. The threshold pump rate for passively Q-switched QCW-pumped laser is derived. The effects of the pump rate and pump-pulse duration on the laser operation characteristics are studied theoretically. The pump power range can be estimated according to the number of output pulses. The numerical simulation results are in good agreement with the experimental results.

  9. Femtosecond Laser Pumped Conical Emission and Seeded Ring Amplification in BBO Crystals

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jia-Sen; LI Feng-Ming; WANG Shu-Feng; GONG Qi-Huang

    2005-01-01

    @@ The characteristics of femtosecond laser pumped conical emission in quadratic media of β-barium borate (BBO)crystals are analysed. A minimized dispersion phase-matching angle, by which a wide-range spectrum can be obtained, is used for broadband amplification. When a seed of a chirped supercontinuum pulse is input, it is found that the seed in wavelength 500nm-750nm is amplified and time resolved.

  10. Diode-pumped Yb,Y:CaF2 laser mode-locked by monolayer graphene

    Science.gov (United States)

    Zhu, Hongtong; Liu, Jie; Jiang, Shouzhen; Xu, Shicai; Su, Liangbi; Jiang, Dapeng; Qian, Xiaobo; Xu, Jun

    2015-12-01

    The large-area and high-quality monolayer graphene saturable absorber with a sandwich structure is prepared by the chemical vapor deposition technique. Using graphene saturable absorber, the mode locking operation of a diode-pumped Yb,Y:CaF2 laser is demonstrated. Without extra negative dispersion elements, 4.8 ps pulses are yielded at 1051 nm. The pulse repetition rate is 60 MHz.

  11. A high-pressure He-Cd laser pumped by a nanosecond electron beam

    Energy Technology Data Exchange (ETDEWEB)

    Goriunov, F.G.; Derzhiev, V.I.; Zhidkov, A.G.; Karelin, A.V.; Nagornyi, D.IU. (Institut Obshchei Fiziki, Moscow (USA) Institut Sil' notochnoi Elektroniki, Tomsk (USSR))

    1989-10-01

    Experimental and numerical-simulation results are presented on the stimulated emission from a high-pressure He-Cd laser pumped by a nanosecond electron beam. Consideration is given to transitions at 325, 442, 534, and 537 nm. The results of numerical calculations are in good agreement with the experimental data. It is shown that the most promising line for the production of broad-aperture high-power systems is at 442 nm. 18 refs.

  12. Diode-pumped Solid-state Cr4+∶Nd∶YAG/KTP Green Laser

    Institute of Scientific and Technical Information of China (English)

    YU Ting; CUI Junwen; LU Yutian; HU Qiquan

    2001-01-01

    A diode-pumped solid-state Cr4+∶Nd∶YAG/KTP green laser with intracavity second harmonic generation is reported. Stable quasi-cw output of 1.03 W in average power, 100 kHz of repetition rate and about 25 ns of pulse width were obtained. Repetition rate and pulse width were studied experimentally and analyzed under different conditions.

  13. Pulsed-laser Pumped Photothermal Deflection Spectroscopy for Liquid Thermal Diffusivity Measurement

    Institute of Scientific and Technical Information of China (English)

    XIAO Liantuan; LI Changyong; ZHANG Linjie; ZHAO Yanting; JIA Suotang; ZHOU Guosheng

    2000-01-01

    The pulsed-laser pumped photothermal deflection spectroscopy (PPDS) is applied to measure liquid thermal diffusivity in a modified collinear configuration. Here the pulsed beam is regarded as in the form of a Dirac delta function. The experiment setup used is described. Measurement result for the thermal diffusivity of a liquid sample(magnta/ethanol saturated solution) is reported. The measurement error is less than 3%.

  14. High-repetition-rate picosecond pump laser based on a Yb:YAG disk amplifier for optical parametric amplification.

    Science.gov (United States)

    Metzger, Thomas; Schwarz, Alexander; Teisset, Catherine Yuriko; Sutter, Dirk; Killi, Alexander; Kienberger, Reinhard; Krausz, Ferenc

    2009-07-15

    We report an optically synchronized picosecond pump laser for optical parametric amplifiers based on an Yb:YAG thin-disk amplifier. At 3 kHz repetition rate, pulse energies of 25 mJ with 1.6 ps pulse duration were achieved with an rms fluctuation in pulse energy of pumped regenerative amplifier.

  15. An efficient flashlamp-pumped laser tunable in the IR range and using chromium-activated forsterite crystals

    Energy Technology Data Exchange (ETDEWEB)

    Baryshevskii, V.G.; Voloshin, V.A.; Demidovich, S.A.; Kimaev, A.E.; Korzhik, M.V. (Belorusskii Gosudarstvennyi Universitet, Minsk (Belorussian SSR))

    1990-11-01

    Efficient frequency-tunable lasing was obtained from Mg2SiO4:Cr single crystals under flashlamp pumping. The feasibility of using chromium ion absorption bands localized in the UV region for optical pumping is demonstrated. Wavelength tuning in the 1170-1330 nm range was obtained in a selective resonator for an output-mirror reflection coefficient of 86 percent. This laser may find application in fiber-optic communications and laser-radar systems.

  16. A 40 W cw Nd:YAG solar laser pumped through a heliostat: a parabolic mirror system

    Science.gov (United States)

    Almeida, J.; Liang, D.; Guillot, E.; Abdel-Hadi, Y.

    2013-06-01

    Solar-pumped solid-state lasers are promising for renewable extreme-temperature material processing. Here, we report a significant improvement in solar laser collection efficiency by pumping the most widely used Nd:YAG single-crystal rod through a heliostat-parabolic mirror system. A conical-shaped fused silica light guide with 3D-CPC output end is used to both transmit and compress the concentrated solar radiation from the focal zone of a 2 m diameter parabolic mirror to a 5 mm diameter Nd:YAG rod within a conical pump cavity, which enables multi-pass pumping through the laser rod. 40 W cw laser power is measured, corresponding to 13.9 W m-2 record-high collection efficiency for the solar laser pumped through a heliostat-parabolic mirror system. 2.9% slope efficiency is fitted, corresponding to 132% enhancement over that of our previous pumping scheme. A 209% reduction in threshold pump power is also registered.

  17. Near-diffraction-limited,35.4 W laser-diode end-pumped Nd:YVO4 slab laser operating at 1342 nm.

    Science.gov (United States)

    Yan, Ying; Zhang, Hengli; Liu, Yang; Yu, Xilong; Zhang, Huaijin; He, Jingliang; Xin, Jianguo

    2009-07-15

    A diode stack end-pumped Nd:YVO4 slab laser at 1342 nm with near-diffraction-limited beam quality by using a hybrid resonator was presented. At a pump power of 139.5 W, laser power of 35.4 W was obtained with a conversion efficiency of 25.4% of the laser diode to laser output. The beam quality M2 factors were measured to be 1.2 in the unstable direction and 1.3 in the stable direction at the output power of 29 W.

  18. Influence of the laser-diode temperature on crystal absorption and output power in an end-pumped Nd:YVO4 laser

    Indian Academy of Sciences (India)

    Ebrahim Safari

    2011-01-01

    In this work, we studied the influence of heat loaded into the laser crystal in an endpumped solid-state Nd:YVO4 high power laser. We have shown experimentally that the optimum value of the laser-diode temperature for the maximum pump power absorption by the Nd:YVO4 crystal and the maximum Nd:YVO4 laser output power are approximately similar to that of a system of the low power type, but by increasing the pump power, different values can be obtained.

  19. High-power ultralong-wavelength Tm-doped silica fiber laser cladding-pumped with a random distributed feedback fiber laser

    Science.gov (United States)

    Jin, Xiaoxi; Du, Xueyuan; Wang, Xiong; Zhou, Pu; Zhang, Hanwei; Wang, Xiaolin; Liu, Zejin

    2016-07-01

    We demonstrated a high-power ultralong-wavelength Tm-doped silica fiber laser operating at 2153 nm with the output power exceeding 18 W and the slope efficiency of 25.5%. A random distributed feedback fiber laser with the center wavelength of 1173 nm was employed as pump source of Tm-doped fiber laser for the first time. No amplified spontaneous emissions or parasitic oscillations were observed when the maximum output power reached, which indicates that employing 1173 nm random distributed feedback fiber laser as pump laser is a feasible and promising scheme to achieve high-power emission of long-wavelength Tm-doped fiber laser. The output power of this Tm-doped fiber laser could be further improved by optimizing the length of active fiber, reflectivity of FBGs, increasing optical efficiency of pump laser and using better temperature management. We also compared the operation of 2153 nm Tm-doped fiber lasers pumped with 793 nm laser diodes, and the maximum output powers were limited to ~2 W by strong amplified spontaneous emission and parasitic oscillation in the range of 1900-2000 nm.

  20. Spatial and polarization entanglement of lasing patterns and related dynamic behaviors in laser-diode-pumped solid-state lasers.

    Science.gov (United States)

    Otsuka, K; Chu, S-C; Lin, C-C; Tokunaga, K; Ohtomo, T

    2009-11-23

    To provide the underlying physical mechanism for formations of spatial- and polarization-entangled lasing patterns (namely, SPEPs), we performed experiments using a c-cut Nd:GdVO(4) microchip laser with off-axis laser-diode pumping. This extends recent work on entangled lasing pattern generation from an isotropic laser, where such a pattern was explained only in terms of generalized coherent states (GCSs) formed by mathematical manipulation. Here, we show that polarization-resolved transverse patterns can be well explained by the transverse mode-locking of distinct orthogonal linearly polarized Ince-Gauss (IG) mode pairs rather than GCSs. Dynamic properties of SPEPs were experimentally examined in both free-running and modulated conditions to identify long-term correlations of IG mode pairs over time. The complete chaos synchronization among IG mode pairs subjected to external perturbation is also demonstrated.

  1. Luminescence response of synthetic opal under femtosecond laser pumping

    Energy Technology Data Exchange (ETDEWEB)

    Vasnetsov, M.V., E-mail: vasnet@hotmail.com [Institute of Physics, National Academy of Sciences of Ukraine, Prospect Nauki 46, Kiev 03680 (Ukraine); Bazhenov, V.Yu.; Dmitruk, I.N. [Institute of Physics, National Academy of Sciences of Ukraine, Prospect Nauki 46, Kiev 03680 (Ukraine); Kudryavtseva, A.D.; Tcherniega, N.V. [P. N. Lebedev Physical Institute of Russian Academy of Sciences, Leninskii Prospect 53, Moscow 119991 (Russian Federation)

    2015-10-15

    Synthetic opal is an artificial photonic metamaterial composed from spherical globules of amorphous silica (SiO{sub 2}) about 300 nm in diameter. We report, for the first time to our knowledge, the origin of a narrow luminescence spectral peak (4 nm HWHM) and optical second and third harmonic generation in synthetic opal samples under femtosecond laser excitation (800 nm) at liquid-nitrogen temperature. Stimulated-emission effects are discussed related to the possibility of nanocavity lasing at the condition of the first Mie resonance in a dielectric sphere. - Highlights: • Second harmonic generation in a synthetic opal (amorphous material composed from spherical SiO{sub 2} globules) was observed. • Narrow luminescence peak which we assign to a Mie resonance in a globule was detected at liquid-nitrogen temperature.

  2. Mid-infrared ZGP optical parametric oscillator directly pumped by a lamp-pumped, Q-switched Cr,Tm,Ho:YAG laser

    NARCIS (Netherlands)

    Nieuwenhuis, Ab F.; Lee, Chris J.; Slot, van der Peter J.M.; Gross, Petra; Boller, Klaus-Jochen; Powers, Peter E.

    2007-01-01

    We generate mid-infrared pulsed light tunable between 5.6 μm and 6.6 μm using an optical parametric oscillator (OPO) directly pumped by a Cr,Tm,Ho:YAG, Q -switched laser operating at 2.1 μm. The Holmium laser uses a RTP Q -switch to produce pulses shorter than 100 ns and energies of up to 42 mJ in a

  3. Mid-Infrared ZGP optical parametric oscillator directly pumped by a lamp-pumped, Q-switched Cr,Tm,Ho:YAG laser

    NARCIS (Netherlands)

    Nieuwenhuis, Albert F.; Lee, Christopher James; van der Slot, Petrus J.M.; Gross, P.; Boller, Klaus J.; Powers, Peter E.

    2007-01-01

    We generate mid-infrared pulsed light tunable between 5.6 μm and 6.6 μm using an optical parametric oscillator (OPO) directly pumped by a Cr,Tm,Ho:YAG, Q -switched laser operating at 2.1 μm. The Holmium laser uses a RTP Q -switch to produce pulses shorter than 100 ns and energies of up to 42 mJ in a

  4. Efficient single-mode operation of a cladding-pumped ytterbium-doped helical-core fiber laser.

    Science.gov (United States)

    Wang, P; Cooper, L J; Sahu, J K; Clarkson, W A

    2006-01-15

    A novel approach to achieving robust single-spatial-mode operation of cladding-pumped fiber lasers with multimode cores is reported. The approach is based on the use of a fiber geometry in which the core has a helical trajectory within the inner cladding to suppress laser oscillation on higher-order modes. In a preliminary proof-of-principle study, efficient single-mode operation of a cladding-pumped ytterbium-doped helical-core fiber laser with a 30 microm diameter core and a numerical aperture of 0.087 has been demonstrated. The laser yielded 60.4 W of output at 1043 nm in a beam with M2 diode stack at 976 nm. The slope efficiency at pump powers well above threshold was approximately 84%, which compares favorably with the slope efficiencies achievable with conventional straight-core Yb-doped double-clad fiber lasers.

  5. Scaling output energy in a diode-end-pumped passively Q-switched laser with a flat-flat resonator

    Science.gov (United States)

    Tang, C. Y.; Huang, Y. J.; Liang, H. C.; Chen, Y. F.; Su, K. W.

    2017-01-01

    The spatial and temporal behaviors in a diode-end-pumped passively Q-switched laser with a flat-flat resonator are systematically explored as a function of the cavity length. A Nd:YAG/Cr4+:YAG miniature laser is experimentally used to show that the scale-up of the pulse energy without the higher-order transverse modes can be practically realized by optimizing the cavity length as a function of the pump size. A theoretical analysis is performed to confirm the experimental results. The extracavity second harmonic generation is experimentally conducted to demonstrate the usefulness of the laser design. PACS number(s): 42.60.Gd Q-switching; 42.55.Xi Diode-pumped lasers; 42.55.-f Lasers; 42.65.Sf Dynamics of nonlinear optical systems; optical instabilities, optical chaos and complexity, and optical spatiotemporal dynamics.

  6. An 80-W Laser Diode Array with 0.1 nm Linewidth for Rubidium Vapor Laser Pumping

    Institute of Scientific and Technical Information of China (English)

    YANG Zi-Ning; WANG Hong-Yan; LU Qi-Sheng; HUA Wei-Hong; XU Xiao-Jun

    2011-01-01

    The spectral linewidth of a 64-emitter laser-diode array is effectively suppressed by using a volume Bragg grating (VBG) based external cavity.At a maximal driven current of 90 A,the device produces a cw output of 80 W with 1.2 W/A slope efficiency and 0.1 nm spectral linewidth (FWHM) centered at 780 nm.The power extraction efficiency reaches 90% as compared with the free running case.The central wavelength of the narrowed spectrum is tuned over a 0.3nm range by adjusting the VBG's temperature.The absorption of 45% laser radiation by a 5-mm-long rubidium vapor cell with 150Torr ethane and 450 Torr helium at 383K is demonstrated.Diode pumped alkali vapor lasers (DPALs) have attracted much attention and have developed quickly in recent years due to their great potential in the high power laser field.[1-4] The efficient operation of DPALs requires pump sources with a linewidth that matches the pressure-broadened absorption band of alkali atoms.In moderate (~5 atm buffer gas) and low (~1 atm buffer gas) pressure operating regimes,the required pump linewidths should be 0.4 nm and less than 0.1 nm,respectively,[5] while the typical linewidth of commercial laser diode arrays (LDAs) is 2-4 nm.%The spectral linewidth of a 64-emitter laser-diode array is effectively suppressed by using a volume Bragg grating (VBG) based external cavity. At a maximal driven current of 90 A, the device produces a cw output of80W with 1.2 W/A slope efficiency and 0.1 nm spectral linewidth (FWHM) centered at 780 nm. The power extraction efficiency reaches 90% as compared with the free running case. The central wavelength of the narrowed spectrum is tuned over a 0.3nm range by adjusting the VBG's temperature. The absorption of 45% laser radiation by a 5-mm-long rubidium vapor cell with 150 Torr ethane and 450 Torr helium at 383 K is demonstrated.

  7. Upgrade of the Laser Calibration System for the ATLAS Hadronic Calorimeter TileCal

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00352208

    2016-01-01

    We present in this contribution the new system for laser calibration of the ATLAS hadronic calorimeter TileCal. The laser system is a part of the three stage calibration apparatus designed to compute the calibration constants of the individual cells of TileCal. The laser system is mainly used to correct for short term (one month) drifts of the readout of the individual cells. A sub-percent accuracy in the control of the calibration constants is required to keep the systematics effects introduced by relative cell miscalibration below the irreducible systematics in determining the parameters of the reconstructed hadronic jets. To achieve this goal in the LHC Run 2 conditions, a new laser system was designed. The architecture of the system is described with details on the new optical line used to distribute laser pulses in each individual detector module and on the new electronics used to drive the laser, to readout the system optical monitors and to interface the system with the Atlas readout, trigger, and slow...

  8. Upgrade of the Laser Calibration System for the ATLAS Hadronic Calorimeter TileCal

    CERN Document Server

    Van Woerden, Marius Cornelis; The ATLAS collaboration

    2015-01-01

    We present in this contribution the new system for laser calibration of the ATLAS hadronic calorimeter TileCal. The laser system is a part of the three stage calibration apparatus designed to compute the calibration constants of the individual cells of TileCal. The laser system is mainly used to correct for short term (one month) drifts of the readout of the individual cells. A sub-percent accuracy in the control of the calibration constants is required to keep the systematics effects introduced by relative cell miscalibration below the irreducible systematics in determining the parameters of the reconstructed hadronic jets. To achieve this goal in the LHC run II conditions, a new laser system was designed. The architecture of the system is described with details on the new optical line used to distribute laser pulses in each individual detector module and on the new electronics used to drive the laser, to readout the system optical monitors and to interface the system with the Atlas readout, trigger, and slo...

  9. Scaling and passively Q-switch operation of a Nd:YAG laser pumped laterally through a YAG prism

    Science.gov (United States)

    Dascalu, T.; Salamu, G.; Sandu, O.; Dinca, M.; Pavel, N.

    2015-04-01

    We report on scaling of a laser configuration in which a YAG prism is used to couple the pump beam from a fiber-coupled diode laser directly into a Nd:YAG medium. Several resonator geometries have been investigated. In free generation regime laser pulses at 1.06 μm with energy of 22.1 mJ for the pump energy of 44.6 mJ were obtained from a 10.0 mm long, 1.0-at% Nd:YAG single crystal that had the high-reflectivity mirror coated directly on one of the laser crystal surface. The slope efficiency was 0.51. A similar uncoated Nd:YAG crystal placed in a plane-plane resonator delivered laser pulses with 17.8 mJ energy under the pump with 45.4 mJ energy, at 0.40 slope efficiency. Further, a passively Q-switched Nd:YAG/Cr4+:YAG composite ceramic laser pumped through a YAG prism has been built. Using a Cr4+:YAG saturable absorber of 0.85 initial transmission the device delivered laser pulses with 0.29 mJ energy and 11 ns duration. The output performances are compared to those obtained in a classical end-pumping scheme.

  10. Analyses of mode filling factor of a laser end-pumped by a LD with high-order transverse modes

    Science.gov (United States)

    Han, Juhong; Wang, You; An, Guofei; Rong, Kepeng; Yu, Hang; Wang, Shunyan; Zhang, Wei; Cai, He; Xue, Liangping; Wang, Hongyuan; Zhou, Jie

    2017-05-01

    Although the concept of the mode filling factor (also named as "mode-matching efficiency") has been well discussed decades before, the concept of so-called overlap coefficient is often confused by the laser technicians because there are several different formulae for various engineering purposes. Furthermore, the LD-pumped configurations have become the mainstream of solid-state lasers since their compact size, high optical-to-optical efficiency, low heat generation, etc. As the beam quality of LDs are usually very unsatisfactory, it is necessary to investigate how the mode filling factor of a laser system is affected by a high-powered LD pump source. In this paper, theoretical analyses of an end-pumped laser are carried out based on the normalized overlap coefficient formalism. The study provides a convenient tool to describe the intrinsically complex issue of mode interaction corresponding to a laser and an end-pumped source. The mode filling factor has been studied for many cases in which the pump mode and the laser mode have been considered together in the calculation based on analyses of the rate equations. The results should be applied for analyses of any other types of lasers with the similar optical geometry.

  11. Improving pumping system efficiency at coal plants

    Energy Technology Data Exchange (ETDEWEB)

    Livoti, W.C.; McCandless, S.; Poltorak, R. [Baldor Electric Co. (United States)

    2009-03-15

    The industry must employ ultramodern technologies when building or upgrading power plant pumping systems thereby using fuels more efficiently. The article discusses the uses and efficiencies of positive displacement pumps, centrifugal pumps and multiple screw pumps. 1 ref., 4 figs.

  12. High power CW and Q-switched operation of a diode-side-pumped Nd: YAG 1319-nm laser

    Institute of Scientific and Technical Information of China (English)

    Yunfang Wan; Kezhen Han; Yun Wang; Jingliang He

    2008-01-01

    We demonstrated the highly efficient continuous wave(CW)and Q-switched infrared laser from a diodeside-pumped Nd:YAG crystal.A CW output as high as 66 W at 1319 nm was achieved under the pump power of 460 W,corresponding to a coversion efficiency of 14.3%.A maximum average power of 8.9 W of TEM00 mode was obtained in Q-switched operation at the repetition rate of 8 kHz.The performance of the laser considering the thermal lens effect induced by pump power Was also analyzed.

  13. Stable,efficient diode-pumped femtosecond Yb:KGW laser through optimization of energy density on SESAM

    Institute of Scientific and Technical Information of China (English)

    Jinfeng Li; Xiaoyan Liang; Jinping He; Hua Lin

    2011-01-01

    An efficient high-power diode-pumped femtosecond Yb:KGW laser is repored.Through optimization of energy density by semiconductor saturable absorber mirror,output power achieved 2.4 W with pulse duration of 350 fs and repetition rate of 53 MHz at a pump power of 12.5 W,corresponding to an optical-to-optical efficiency of 19.2%. We believe that it is the highest optical-to-optical efficiency for single-diode-pumped bulk Yb:KGW femtosecond lasers to date.

  14. High power 355 nm diode-pumped solid-state laser

    Science.gov (United States)

    Yu, Yang; Cheng, Chee Yuen; Peng, Xiaoyuan; Yong, Saw Soon

    2015-07-01

    This paper reported a high-power diode-pumped solid-state laser for material processing applications with a target of more than 60 ns pulse width at 355 nm. As known, long pulse width IR laser (around 70-100 ns) is difficult to get high conversion efficiency to UV since the peak power is more than 2 times lower than 20-30 ns laser. However, the unique long pulse width characteristic makes the laser an ideal tool for flexible PCB drilling with 30-50 μm holes and for cutting portable devices. Up to 52.2% IR to UV conversion efficiency was obtained by our novel intra-cavity harmonic generation cavity design. A 9.3W UV output at 30 kHz was demonstrated with compact intra-cavity sum frequency design. Special conduction cooling-designed LD side-pumped module provided 17.8 W fundamental IR output power with AOM q-switching. The UV output pulse width is 76 ns at 30 kHz and 140 ns at 70 kHz. The type I and type II phase matching LBOs were used for intra-cavity harmonic generations of 355 nm. The output characteristics of the IR and the harmonic generations varying with the pulse repetition rate were also investigated. The experimental results are in agreement with the theoretical modelling. This system will also be useful for many material processing applications such as PCB cutting and wafer scribing.

  15. Electrically pumped all photonic crystal 2nd order DFB lasers arrays emitting at 2.3 μm

    Science.gov (United States)

    Adelin, B.; Gauthier-Lafaye, O.; Dubreuil, P.; Lecestre, A.; Rouillard, Y.; Bahriz, M.; Boissier, G.; Vicet, A.; Monmayrant, A.

    2017-03-01

    Single-mode, widely tunable laser diodes in the mid-infrared range are highly interesting for demanding spectroscopic applications involving multi-species discrimination. We report on an alternative approach using single frequency laser arrays. Single-mode laser arrays were fabricated using all-photonic-crystal electrically pumped distributed feedback cavities on GaSb. The fabricated lasers exhibit thresholds in the 3.2 kA/cm2 range in a continuous wave regime at room temperature. The maximum output power reaches 1 mW and single mode operation with a side-mode suppression ratio of 30 dB is demonstrated. These lasers were used to perform tunable diode laser absorption spectroscopy of several gases in standard gas cells. Continuous spectral coverage of a 40 nm band using 10 lasers seems an achievable goal using laser arrays with PhC lattice constant variations of 1 nm from laser to laser.

  16. Mitigating transverse mode instability in a single-end pumped all-fiber laser oscillator with a scaling power of up to 2 kW

    Science.gov (United States)

    Yang, Baolai; Zhang, Hanwei; Wang, Xiaolin; Su, Rongtao; Tao, Rumao; Zhou, Pu; Xu, Xiaojun; Lu, Qisheng

    2016-10-01

    In the power scaling of monolithic fiber laser oscillators, thermally induced transverse mode instability (TMI) is one of the main limiting factors. The onset of TMI deteriorates the output laser beam quality and restricts the maximum achievable laser power. Most studies on TMI focus on fiber amplifiers, while reports on TMI in fiber laser oscillators are much fewer. Here, we report an experimental study on mitigating TMI by detuning the pumping wavelength in a single-end pumped monolithic fiber laser oscillator. The performance of the laser oscillator is investigated with individual 976 nm pumping, with individual 915 nm pumping, and with hybrid pumping. Experimental results show that TMI is mitigated by replacing 976 nm pumping with 915 nm pumping. In the hybrid pumping scheme, the influence of ratios of 976 nm pumping power to 915 nm pumping power on the TMI threshold is studied. Finally, by optimizing pumping power ratio, the output laser power of the monolithic fiber oscillator is enhanced to 2 kW. The M2 factor of the output laser is ˜1.6 and the Raman Stokes light occupies less than 1% of the total power.

  17. Activation of theMercury Laser System: A Diode-Pumped Solid-State Laser Driver for Inertial Fusion

    Energy Technology Data Exchange (ETDEWEB)

    Bayramian, A J; Beach, R J; Bibeau, C; Ebbers, C A; Freitas, B L; Kanz, V K; Payne, S A; Schaffers, K I; Skulina, K M; Smith, L K; Tassano, J B

    2001-09-10

    Initial measurements are reported for the Mercury laser system, a scalable driver for rep-rated inertial fusion energy. The performance goals include 10% electrical efficiency at 10 Hz and 100 J with a 2-10 ns pulse length. We report on the first Yb:S-FAP crystals grown to sufficient size for fabricating full size (4 x 6 cm) amplifier slabs. The first of four 160 kW (peak power) diode arrays and pump delivery systems were completed and tested with the following results: 5.5% power droop over a 0.75 ms pulse, 3.95 nm spectral linewidth, far field divergence of 14.0 mrad and 149.5 mrad in the microlensed and unmicrolensed directions respectively, and 83% optical-to-optical transfer efficiency through the pump delivery system.

  18. 1300 nm optically pumped quantum dot spin vertical external-cavity surface-emitting laser

    Energy Technology Data Exchange (ETDEWEB)

    Alharthi, S. S., E-mail: ssmalh@essex.ac.uk; Henning, I. D.; Adams, M. J. [School of Computer Science and Electronic Engineering, University of Essex, Wivenhoe Park, Colchester CO4 3SQ (United Kingdom); Orchard, J. [Department of Physics and Astronomy, University of Sheffield, Hounsfield Road, Sheffield S3 7RH (United Kingdom); Clarke, E. [EPSRC National Centre for III-V Technologies, University of Sheffield, Mappin Street, S1 3JD Sheffield (United Kingdom)

    2015-10-12

    We report a room temperature optically pumped Quantum Dot-based Spin-Vertical-External-Cavity Surface-Emitting laser (QD Spin-VECSEL) operating at the telecom wavelength of 1.3 μm. The active medium was composed of 5 × 3 QD layers; each threefold group was positioned at an antinode of the standing wave of the optical field. Circularly polarized lasing in the QD-VECSEL under Continuous-Wave optical pumping has been realized with a threshold pump power of 11 mW. We further demonstrate at room temperature control of the QD-VECSEL output polarization ellipticity via the pump polarization.

  19. Collinear laser spectroscopy of manganese isotopes using optical pumping in ISCOOL

    CERN Multimedia

    Marsh, B A; Neyens, G; Flanagan, K; Rajabali, M M; Reponen, M; Campbell, P; Procter, T J

    Recently, optical pumping of ions has been achieved inside an ion beam cooler-buncher. By illuminating the central axis of the cooler with laser light, subsequent decay populates selected ionic metastable states. This population enhancement is retained as the ion beam is delivered to an experimental station. In the case of collinear laser spectroscopy, transitions can then be excited from a preferred metastable level, rather than the ground-state. This proposal seeks to establish and develop the technique for ISCOOL. As a test of efficiency, this will be applied to the study of $^{55-66}$Mn isotopes using collinear laser spectroscopy-expanding an earlier study where the benefit of the technique was demonstrated. This will provide nuclear spins, magnetic-dipole and electric-quadrupole moments and changes in mean-square charge radii across N = 40 shell closure candidate and into a region where an onset of deformation, and a new "island of inversion" is predicted.

  20. Dual wavelength operation in diode-end-pumped hybrid vanadate laser

    Indian Academy of Sciences (India)

    A J Singh; S K Sharma; P K Mukhopadhyay; S M Oak

    2010-11-01

    Dual wavelength operation at 1062.8 nm and 1064.1 nm in a diode-pumped hybrid laser comprising of Nd3+-doped birefringent YVO4 and GdVO4 crystals is demon-strated. A detailed characterization of the laser is performed under CW and pulsed operation. Under Q-switching, 4 W of average power at 5 kHz repetition rate is obtained with 32 ns FWHM pulse duration corresponding to 25 kW of the peak power. The intensity and the polarization of the individual spectral components can be easily controlled by changing the relative gain and the relative orientation of the two crystals. The resulting pulsed dual-wavelength laser has the potential to be used as a source for generating terahertz radiation.