WorldWideScience

Sample records for ptx loaded apt-nps

  1. A self-assembling nanomedicine of conjugated linoleic acid-paclitaxel conjugate (CLA-PTX) with higher drug loading and carrier-free characteristic

    Science.gov (United States)

    Zhong, Ting; Yao, Xin; Zhang, Shuang; Guo, Yang; Duan, Xiao-Chuan; Ren, Wei; Dan Huang; Yin, Yi-Fan; Zhang, Xuan

    2016-11-01

    The main objective of this study was to demonstrate the proof-of-principle for the hypothesis that conjugated linoleic acid-paclitaxel conjugate (CLA-PTX), a novel fatty acid modified anti-cancer drug conjugate, could self-assemble forming nanoparticles. The results indicated that a novel self-assembling nanomedicine, CLA-PTX@PEG NPs (about 105 nm), with Cremophor EL (CrEL)-free and organic solvent-free characteristics, was prepared by a simple precipitation method. Being the ratio of CLA-PTX:DSPE-PEG was only 1:0.1 (w/w), the higher drug loading CLA-PTX@PEG NPs (about 90%) possessed carrier-free characteristic. The stability results indicated that CLA-PTX@PEG NPs could be stored for at least 9 months. The safety of CLA-PTX@PEG NPs was demonstrated by the MTD results. The anti-tumor activity and cellular uptake were also confirmed in the in vitro experiments. The lower crystallinity, polarity and solubility of CLA-PTX compared with that of paclitaxel (PTX) might be the possible reason for CLA-PTX self-assembling forming nanoparticles, indicating a relationship between PTX modification and nanoparticles self-assembly. Overall, the data presented here confirm that this drug self-delivery strategy based on self-assembly of a CLA-PTX conjugate may offer a new way to prepare nanomedicine products for cancer therapy involving the relationship between anticancer drug modification and self-assembly into nanoparticles.

  2. A comparative in vitro evaluation of self-assembled PTX-PLA and PTX-MPEG-PLA nanoparticles

    Science.gov (United States)

    Cui, Fei; Li, Yang; Zhou, Shuifan; Jia, Mengmeng; Yang, Xiangrui; Yu, Fei; Ye, Shefang; Hou, Zhenqing; Xie, Liya

    2013-06-01

    We present a dialysis technique to direct the self-assembly of paclitaxel (PTX)-loaded nanoparticles (NPs) using methoxypolyethylene glycol-poly( d, l-lactide) (MPEG-PLA) and PLA, respectively. The composition, morphology, particle size and zeta potential, drug loading content, and drug encapsulation efficiency of both PTX-PLA NPs and PTX-MPEG-PLA NPs were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, dynamic light scattering, electrophoretic light scattering, and high-performance liquid chromatography. The passive targeting effect and in vitro cell viability of the PTX-MPEG-PLA NPs on HeLa cells were demonstrated by comparative cellular uptake and MTT assay of the PTX-PLA NPs. The results showed that the PTX-MPEG-PLA NPs and PTX-PLA NPs presented a hydrodynamic particle size of 179.5 and 441.9 nm, with a polydispersity index of 0.172 and 0.189, a zeta potential of -24.3 and -42.0 mV, drug encapsulation efficiency of 18.3% and 20.0%, and drug-loaded content of 1.83% and 2.00%, respectively. The PTX-MPEG-PLA NPs presented faster release rate with minor initial burst compared to the PTX-PLA NPs. The PTX-MPEG-PLA NPs presented superior cell cytotoxicity and excellent cellular uptake compared to the PTX-PLA NPs. These results suggested that the PTX-MPEG-PLA NPs presented more desirable characteristics for sustained drug delivery compared to PTX-PLA NPs.

  3. A comparative in vitro evaluation of self-assembled PTX-PLA and PTX-MPEG-PLA nanoparticles.

    Science.gov (United States)

    Cui, Fei; Li, Yang; Zhou, Shuifan; Jia, Mengmeng; Yang, Xiangrui; Yu, Fei; Ye, Shefang; Hou, Zhenqing; Xie, Liya

    2013-06-27

    We present a dialysis technique to direct the self-assembly of paclitaxel (PTX)-loaded nanoparticles (NPs) using methoxypolyethylene glycol-poly(d,l-lactide) (MPEG-PLA) and PLA, respectively. The composition, morphology, particle size and zeta potential, drug loading content, and drug encapsulation efficiency of both PTX-PLA NPs and PTX-MPEG-PLA NPs were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, dynamic light scattering, electrophoretic light scattering, and high-performance liquid chromatography. The passive targeting effect and in vitro cell viability of the PTX-MPEG-PLA NPs on HeLa cells were demonstrated by comparative cellular uptake and MTT assay of the PTX-PLA NPs. The results showed that the PTX-MPEG-PLA NPs and PTX-PLA NPs presented a hydrodynamic particle size of 179.5 and 441.9 nm, with a polydispersity index of 0.172 and 0.189, a zeta potential of -24.3 and -42.0 mV, drug encapsulation efficiency of 18.3% and 20.0%, and drug-loaded content of 1.83% and 2.00%, respectively. The PTX-MPEG-PLA NPs presented faster release rate with minor initial burst compared to the PTX-PLA NPs. The PTX-MPEG-PLA NPs presented superior cell cytotoxicity and excellent cellular uptake compared to the PTX-PLA NPs. These results suggested that the PTX-MPEG-PLA NPs presented more desirable characteristics for sustained drug delivery compared to PTX-PLA NPs.

  4. Recognition of Neisseria meningitidis by the long pentraxin PTX3 and its role as an endogenous adjuvant.

    Science.gov (United States)

    Bottazzi, Barbara; Santini, Laura; Savino, Silvana; Giuliani, Marzia M; Dueñas Díez, Ana I; Mancuso, Giuseppe; Beninati, Concetta; Sironi, Marina; Valentino, Sonia; Deban, Livija; Garlanda, Cecilia; Teti, Giuseppe; Pizza, Mariagrazia; Rappuoli, Rino; Mantovani, Alberto

    2015-01-01

    Long pentraxin 3 (PTX3) is a non-redundant component of the humoral arm of innate immunity. The present study was designed to investigate the interaction of PTX3 with Neisseria meningitidis. PTX3 bound acapsular meningococcus, Neisseria-derived outer membrane vesicles (OMV) and 3 selected meningococcal antigens (GNA0667, GNA1030 and GNA2091). PTX3-recognized microbial moieties are conserved structures which fulfil essential microbial functions. Ptx3-deficient mice had a lower antibody response in vaccination protocols with OMV and co-administration of PTX3 increased the antibody response, particularly in Ptx3-deficient mice. Administration of PTX3 reduced the bacterial load in infant rats challenged with Neisseria meningitidis. These results suggest that PTX3 recognizes a set of conserved structures from Neisseria meningitidis and acts as an amplifier/endogenous adjuvant of responses to this bacterium.

  5. Recognition of Neisseria meningitidis by the long pentraxin PTX3 and its role as an endogenous adjuvant.

    Directory of Open Access Journals (Sweden)

    Barbara Bottazzi

    Full Text Available Long pentraxin 3 (PTX3 is a non-redundant component of the humoral arm of innate immunity. The present study was designed to investigate the interaction of PTX3 with Neisseria meningitidis. PTX3 bound acapsular meningococcus, Neisseria-derived outer membrane vesicles (OMV and 3 selected meningococcal antigens (GNA0667, GNA1030 and GNA2091. PTX3-recognized microbial moieties are conserved structures which fulfil essential microbial functions. Ptx3-deficient mice had a lower antibody response in vaccination protocols with OMV and co-administration of PTX3 increased the antibody response, particularly in Ptx3-deficient mice. Administration of PTX3 reduced the bacterial load in infant rats challenged with Neisseria meningitidis. These results suggest that PTX3 recognizes a set of conserved structures from Neisseria meningitidis and acts as an amplifier/endogenous adjuvant of responses to this bacterium.

  6. In vitro and in vivo evaluation of anti-nucleolin-targeted magnetic PLGA nanoparticles loaded with doxorubicin as a theranostic agent for enhanced targeted cancer imaging and therapy.

    Science.gov (United States)

    Mosafer, Jafar; Abnous, Khalil; Tafaghodi, Mohsen; Mokhtarzadeh, Ahad; Ramezani, Mohammad

    2017-04-01

    A superparamagnetic iron oxide nanoparticles (SPIONs)/doxorubicin (Dox) co-loaded poly(lactic-co-glycolic acid) (PLGA)-based nanoparticles targeted with AS1411 aptamer (Apt) against murine C26 colon carcinoma cells is successfully developed via a modified multiple emulsion solvent evaporation method for theranostic purposes. The mean size of SPIO/Dox-NPs (NPs) was 130nm with a narrow particle size distribution and Dox loading of 3.0%. The SPIO loading of 16.0% and acceptable magnetic properties are obtained and analyzed using thermogravimetric and vibration simple magnetometer analysis, respectively. The best release profile from NPs was observed in PBS at pH 7.4, in which very low burst release was observed. Nucleolin is a targeting ligand to facilitate anti-tumor delivery of AS1411-targeted NPs. The Apt conjugation to NPs (Apt-NPs) enhanced cellular uptake of Dox in C26 cancer cells. Apt-NPs enhance the cytotoxicity effect of Dox followed by a significantly higher tumor inhibition and prolonged animal survival in mice bearing C26 colon carcinoma xenografts. Furthermore, Apt-NPs enhance the contrast of magnetic resonance images in tumor site. Altogether, these Apt-NPs could be considered as a powerful tumor-targeted delivery system for their potential as dual therapeutic and diagnostic applications in cancers.

  7. Free paclitaxel loaded PEGylated-paclitaxel nanoparticles: preparation and comparison with other paclitaxel systems in vitro and in vivo.

    Science.gov (United States)

    Lu, Jingkai; Chuan, Xingxing; Zhang, Hua; Dai, Wenbing; Wang, Xinglin; Wang, Xueqing; Zhang, Qiang

    2014-08-25

    Previously, PEGylated paclitaxel (PEG-PTX) was found not favorable as a polymer prodrug because of its poor antitumor efficiency. But surprisingly, it was found in our study that PEG-PTX could form a novel nanoparticle system with free PTX. To address how this system works, we compared PTX loaded PEG-PTX nanoparticles (PEG-PTX/PTX) with PTX loaded PEG-PLA micelles (PEG-PLA/PTX) or PTX injection available (Taxol(®)) in vitro and in vivo. Firstly, it was found that PEG-PTX/PTX was more stable in aqueous solution than PEG-PLA/PTX in terms of PTX crystal formation and drug release. Then it was demonstrated that coumarin loaded PEG-PTX nanoparticles had a much higher uptake in MCF-7 cells compared to coumarin loaded PEG-PLA micelles. The in vivo imaging study revealed that DIR or DID (near infrared fluorescent substances) loaded PEG-PTX nanoparticles distributed more in tumors in MCF-7 tumor bearing mice than DIR or DID loaded PEG-PLA micelles and solvent system of Taxol(®). In the efficacy study with MCF-7 tumor bearing mice, PEG-PTX/PTX showed significantly higher antitumor activity than PEG-PLA/PTX at the same PTX dosage. At the dose of 10mg free PTX per kg, PEG-PTX/PTX displayed similar efficacy as Taxol(®) but less toxicity evaluated by the loss of body weight. With the increase of free PTX to 15 mg/kg, PEG-PTX/PTX showed significantly better efficacy than Taxol(®). In conclusion, with favorable characteristics in stability, cellular uptake, cytotoxicity, biodistribution, safety and efficacy, PEG-PTX/PTX seems highly potential as a nanocarrier for PTX delivery.

  8. The long pentraxin PTX3 promotes fibrocyte differentiation.

    Science.gov (United States)

    Pilling, Darrell; Cox, Nehemiah; Vakil, Varsha; Verbeek, J Sjef; Gomer, Richard H

    2015-01-01

    Monocyte-derived, fibroblast-like cells called fibrocytes are associated with fibrotic lesions. The plasma protein serum amyloid P component (SAP; also known as pentraxin-2, PTX2) inhibits fibrocyte differentiation in vitro, and injections of SAP inhibit fibrosis in vivo. SAP is a member of the pentraxin family of proteins that includes C-reactive protein (CRP; PTX1) and pentraxin-3 (PTX3). All three pentraxins are associated with fibrosis, but only SAP and CRP have been studied for their effects on fibrocyte differentiation. We find that compared to SAP and CRP, PTX3 promotes human and murine fibrocyte differentiation. The effect of PTX3 is dependent on FcγRI. In competition studies, the fibrocyte-inhibitory activity of SAP is dominant over PTX3. Binding competition studies indicate that SAP and PTX3 bind human FcγRI at different sites. In murine models of lung fibrosis, PTX3 is present in fibrotic areas, and the PTX3 distribution is associated with collagen deposition. In lung tissue from pulmonary fibrosis patients, PTX3 has a widespread distribution, both in unaffected tissue and in fibrotic lesions, whereas SAP is restricted to areas adjacent to vessels, and absent from fibrotic areas. These data suggest that the relative levels of SAP and PTX3 present at sites of fibrosis may have a significant effect on the ability of monocytes to differentiate into fibrocytes.

  9. The long pentraxin PTX3 promotes fibrocyte differentiation.

    Directory of Open Access Journals (Sweden)

    Darrell Pilling

    Full Text Available Monocyte-derived, fibroblast-like cells called fibrocytes are associated with fibrotic lesions. The plasma protein serum amyloid P component (SAP; also known as pentraxin-2, PTX2 inhibits fibrocyte differentiation in vitro, and injections of SAP inhibit fibrosis in vivo. SAP is a member of the pentraxin family of proteins that includes C-reactive protein (CRP; PTX1 and pentraxin-3 (PTX3. All three pentraxins are associated with fibrosis, but only SAP and CRP have been studied for their effects on fibrocyte differentiation. We find that compared to SAP and CRP, PTX3 promotes human and murine fibrocyte differentiation. The effect of PTX3 is dependent on FcγRI. In competition studies, the fibrocyte-inhibitory activity of SAP is dominant over PTX3. Binding competition studies indicate that SAP and PTX3 bind human FcγRI at different sites. In murine models of lung fibrosis, PTX3 is present in fibrotic areas, and the PTX3 distribution is associated with collagen deposition. In lung tissue from pulmonary fibrosis patients, PTX3 has a widespread distribution, both in unaffected tissue and in fibrotic lesions, whereas SAP is restricted to areas adjacent to vessels, and absent from fibrotic areas. These data suggest that the relative levels of SAP and PTX3 present at sites of fibrosis may have a significant effect on the ability of monocytes to differentiate into fibrocytes.

  10. Influence of pentraxin 3 (PTX3 genetic variants on myocardial infarction risk and PTX3 plasma levels.

    Directory of Open Access Journals (Sweden)

    Elisa Barbati

    Full Text Available PTX3 is a long pentraxin of the innate immune system produced by different cell types (mononuclear phagocytes, dendritic cells, fibroblasts and endothelial cells at the inflammatory site. It appears to have a cardiovascular protective function by acting on the immune-inflammatory balance in the cardiovascular system. PTX3 plasma concentration is an independent predictor of mortality in patients with acute myocardial infarction (AMI but the influence of PTX3 genetic variants on PTX3 plasma concentration has been investigated very little and there is no information on the association between PTX3 variations and AMI. Subjects of European origin (3245, 1751 AMI survivors and 1494 controls were genotyped for three common PTX3 polymorphisms (SNPs (rs2305619, rs3816527, rs1840680. Genotype and allele frequencies of the three SNPs and the haplotype frequencies were compared for the two groups. None of the genotypes, alleles or haplotypes were significantly associated with the risk of AMI. However, analysis adjusted for age and sex indicated that the three PTX3 SNPs and the corresponding haplotypes were significantly associated with different PTX3 plasma levels. There was also a significant association between PTX3 plasma concentrations and the risk of all-cause mortality at three years in AMI patients (OR 1.10, 95% CI: 1.01-1.20, p = 0.02. Our study showed that PTX3 plasma levels are influenced by three PTX3 polymorphisms. Genetically determined high PTX3 levels do not influence the risk of AMI, suggesting that the PTX3 concentration itself is unlikely to be even a modest causal factor for AMI. Analysis also confirmed that PTX3 is a prognostic marker after AMI.

  11. Pathogen Recognition by the Long Pentraxin PTX3

    Directory of Open Access Journals (Sweden)

    Federica Moalli

    2011-01-01

    Full Text Available Innate immunity represents the first line of defence against pathogens and plays key roles in activation and orientation of the adaptive immune response. The innate immune system comprises both a cellular and a humoral arm. Components of the humoral arm include soluble pattern recognition molecules (PRMs that recognise pathogen-associated molecular patterns (PAMPs and initiate the immune response in coordination with the cellular arm, therefore acting as functional ancestors of antibodies. The long pentraxin PTX3 is a prototypic soluble PRM that is produced at sites of infection and inflammation by both somatic and immune cells. Gene targeting of this evolutionarily conserved protein has revealed a nonredundant role in resistance to selected pathogens. Moreover, PTX3 exerts important functions at the cross-road between innate immunity, inflammation, and female fertility. Here, we review the studies on PTX3, with emphasis on pathogen recognition and cross-talk with other components of the innate immune system.

  12. Single Amino Acid Polymorphisms of Pertussis Toxin Subunit S2 (PtxB Affect Protein Function.

    Directory of Open Access Journals (Sweden)

    Scott H Millen

    Full Text Available Whooping cough due to Bordetella pertussis is increasing in incidence, in part due to accumulation of mutations which increase bacterial fitness in highly vaccinated populations. Polymorphisms in the pertussis toxin, ptxA and ptxB genes, and the pertactin, prn genes of clinical isolates of Bordetella pertussis collected in Cincinnati from 1989 through 2005 were examined. While the ptxA and prn genotypes were variable, all 48 strains had the ptxB2 genotype; ptxB1 encodes glycine at amino acid 18 of the S2 subunit of pertussis toxin, while ptxB2 encodes serine. We investigated antigenic and functional differences of PtxB1 and PtxB2. The S2 protein was not very immunogenic. Only a few vaccinated or individuals infected with B. pertussis developed antibody responses to the S2 subunit, and these sera recognized both polymorphic forms equally well. Amino acid 18 of S2 is in a glycan binding domain, and the PtxB forms displayed differences in receptor recognition and toxicity. PtxB1 bound better to the glycoprotein, fetuin, and Jurkat T cells in vitro, but the two forms were equally effective at promoting CHO cell clustering. To investigate in vivo activity of Ptx, one μg of Ptx was administered to DDY mice and blood was collected on 4 days after injection. PtxB2 was more effective at promoting lymphocytosis in mice.

  13. Nucleolin targeting AS1411 modified protein nanoparticle for antitumor drugs delivery.

    Science.gov (United States)

    Wu, Jinhui; Song, Chenchen; Jiang, Chenxiao; Shen, Xin; Qiao, Qian; Hu, Yiqiao

    2013-10-07

    Over recent years, cell surface nucleolin as an anticancer target has attracted many researchers' attentions. To improve the antitumor efficacy, we developed a nucleolin targeted protein nanoparticle (NTPN) delivery system in which human serum albumin (HSA) was used as drug carrier and a DNA aptamer named AS1411, which had high affinity to nucleolin, was used as a bullet. The HSA nanoparticles (NPs-PTX) were fabricated by a novel self-assembly method and then modified with AS1411 (Apt-NPs-PTX). The resulted Apt-NPs-PTX were spherical. Compared with NPs-PTX, the uptake of Apt-NPs-PTX displayed a significant increase in MCF-7 cells while there was a decrease in nontumor cell lines such as MCF-10A and 3T3 cells. In a cytotoxic study, Apt-NPs-PTX displayed an enhanced cytotoxicity in MCF-7 tumor cells while there was almost no cytotoxicity in MCF-10A cells. Endostatin, a nucleolin inhibitor, could significantly decrease the internalization of Apt-NPs-PTX, suggesting nucleolin mediates the transmembrane process of Apt-NPs-PTX. Therefore, the AS1411 modified NTPN delivery system might be a promising targeted drug delivery system.

  14. Deficiency of Long Pentraxin PTX3 Promoted Neointimal Hyperplasia after Vascular Injury.

    Science.gov (United States)

    Ishino, Mitsunori; Shishido, Tetsuro; Suzuki, Satoshi; Katoh, Shigehiko; Sasaki, Toshiki; Funayama, Akira; Netsu, Shunsuke; Hasegawa, Hiromasa; Honda, Shintaro; Takahashi, Hiroki; Arimoto, Takanori; Miyashita, Takehiko; Miyamoto, Takuya; Watanabe, Tetsu; Takeishi, Yasuchika; Kubota, Isao

    2015-01-01

    Pentraxin 3 (PTX3) is a novel marker for the primary local activation of innate immunity and inflammatory responses. Although clinical and experimental evidence suggests that PTX3 is associated with atherosclerosis, the relationship between PTX3 and vascular remodeling after wall injury remains to be determined. We investigated the effects of PTX3 on neointimal hyperplasia following wire vascular injury. PTX3 systemic knockout (PTX3-KO) mice and wild-type littermate (WT) mice were subjected to wire-mediated endovascular injury. At four weeks after wire-mediated injury, the areas of neointimal and medial hyperplasia were evaluated. The PTX3-KO mice exhibited higher hyperplasia/media ratios than the WT mice after wire injury, and the degree of Mac-3-positive macrophage accumulation was significantly higher in the PTX3-KO mice than in the WT mice. Furthermore, the PTX3-KO mice showed a much greater increase in the number of PCNA-stained cells in the vascular wall than that observed in the WT mice. A deficiency of PTX3 results in deteriorated neointimal hyperplasia after vascular injury via the effects of macrophage accumulation and vascular smooth muscle cell proliferation and migration.

  15. Efficacy of PTX3 and Posaconazole Combination in a Rat Model of Invasive Pulmonary Aspergillosis

    OpenAIRE

    Marra, Emanuele; Sousa, Vitor L.; Gaziano,Roberta; Pacello, M. Lucrezia; Arseni, Brunilde; Aurisicchio, Luigi; De Santis, Rita; Salvatori, Giovanni

    2014-01-01

    Posaconazole is currently used for the prophylaxis of invasive pulmonary aspergillosis (IPA). Limitations to posaconazole usage are drug-drug interactions and side effects. PTX3 is an innate immunity glycoprotein with opsonic activity, proven to be protective in IPA animal models. This study investigated the combination of posaconazole with PTX3. The results indicate synergy between PTX3 and posaconazole against aspergillosis, suggesting that a combination of reduced doses of posaconazole wit...

  16. Bioavailability Enhancement of Paclitaxel via a Novel Oral Drug Delivery System: Paclitaxel-Loaded Glycyrrhizic Acid Micelles

    Directory of Open Access Journals (Sweden)

    Fu-Heng Yang

    2015-03-01

    Full Text Available Paclitaxel (PTX, taxol, a classical antitumor drug against a wide range of tumors, shows poor oral bioavailability. In order to improve the oral bioavailability of PTX, glycyrrhizic acid (GA was used as the carrier in this study. This was the first report on the preparation, characterization and the pharmacokinetic study in rats of PTX-loaded GA micelles The PTX-loaded micelles, prepared with ultrasonic dispersion method, displayed small particle sizes and spherical shapes. Differential scanning calorimeter (DSC thermograms indicated that PTX was entrapped in the GA micelles and existed as an amorphous state. The encapsulation efficiency was about 90%, and the drug loading rate could reach up to 7.90%. PTX-loaded GA micelles displayed a delayed drug release compared to Taxol in the in vitro release experiment. In pharmacokinetic study via oral administration, the area under the plasma concentration-time curve (AUC0→24 h of PTX-loaded GA micelles was about six times higher than that of Taxol (p < 0.05. The significant oral absorption enhancement of PTX from PTX-loaded GA micelles could be largely due to the increased absorption in jejunum and colon intestine. All these results suggested that GA would be a promising carrier for the oral delivery of PTX.

  17. Efficacy of PTX3 and posaconazole combination in a rat model of invasive pulmonary aspergillosis.

    Science.gov (United States)

    Marra, Emanuele; Sousa, Vitor L; Gaziano, Roberta; Pacello, M Lucrezia; Arseni, Brunilde; Aurisicchio, Luigi; De Santis, Rita; Salvatori, Giovanni

    2014-10-01

    Posaconazole is currently used for the prophylaxis of invasive pulmonary aspergillosis (IPA). Limitations to posaconazole usage are drug-drug interactions and side effects. PTX3 is an innate immunity glycoprotein with opsonic activity, proven to be protective in IPA animal models. This study investigated the combination of posaconazole with PTX3. The results indicate synergy between PTX3 and posaconazole against aspergillosis, suggesting that a combination of reduced doses of posaconazole with the immune response enhancer PTX3 might represent a treatment option with a higher therapeutic index than posaconazole.

  18. Structural characterization of PTX3 disulfide bond network and its multimeric status in cumulus matrix organization.

    Science.gov (United States)

    Inforzato, Antonio; Rivieccio, Vincenzo; Morreale, Antonio P; Bastone, Antonio; Salustri, Antonietta; Scarchilli, Laura; Verdoliva, Antonio; Vincenti, Silvia; Gallo, Grazia; Chiapparino, Caterina; Pacello, Lucrezia; Nucera, Eleonora; Serlupi-Crescenzi, Ottaviano; Day, Anthony J; Bottazzi, Barbara; Mantovani, Alberto; De Santis, Rita; Salvatori, Giovanni

    2008-04-11

    PTX3 is an acute phase glycoprotein that plays key roles in resistance to certain pathogens and in female fertility. PTX3 exerts its functions by interacting with a number of structurally unrelated molecules, a capacity that is likely to rely on its complex multimeric structure stabilized by interchain disulfide bonds. In this study, PAGE analyses performed under both native and denaturing conditions indicated that human recombinant PTX3 is mainly composed of covalently linked octamers. The network of disulfide bonds supporting this octameric assembly was resolved by mass spectrometry and Cys to Ser site-directed mutagenesis. Here we report that cysteine residues at positions 47, 49, and 103 in the N-terminal domain form three symmetric interchain disulfide bonds stabilizing four protein subunits in a tetrameric arrangement. Additional interchain disulfide bonds formed by the C-terminal domain cysteines Cys(317) and Cys(318) are responsible for linking the PTX3 tetramers into octamers. We also identified three intrachain disulfide bonds within the C-terminal domain that we used as structural constraints to build a new three-dimensional model for this domain. Previously it has been shown that PTX3 is a key component of the cumulus oophorus extracellular matrix, which forms around the oocyte prior to ovulation, because cumuli from PTX3(-/-) mice show defective matrix organization. Recombinant PTX3 is able to restore the normal phenotype ex vivo in cumuli from PTX3(-/-) mice. Here we demonstrate that PTX3 Cys to Ser mutants, mainly assembled into tetramers, exhibited wild type rescue activity, whereas a mutant, predominantly composed of dimers, had impaired functionality. These findings indicate that protein oligomerization is essential for PTX3 activity within the cumulus matrix and implicate PTX3 tetramers as the functional molecular units required for cumulus matrix organization and stabilization.

  19. The tubulin-bound conformation of paclitaxel: T-taxol vs "PTX-NY".

    Science.gov (United States)

    Yang, Yutao; Alcaraz, Ana A; Snyder, James P

    2009-03-27

    Nearly 35 years after its discovery and 11 years after FDA approval of paclitaxel (PTX) as a breakthrough anticancer drug, the 3-D structure of the agent bound to its beta-tubulin target was proposed to be T-Taxol. The latter bioactive form has recently been challenged by the Ojima group with a structure, "PTX-NY" ("REDOR Taxol"), in which the C-13 side chain is proposed to adopt a different conformation and an alternative hydrogen-bonding pattern in the tubulin binding site. Previously, the two conformers were compared to show that only T-Taxol fits the PTX-derived electron crystallographic density. That work has been extended by molecular mechanics and quantum chemical methods to reveal that the PTX-NY conformation is relatively less stable, on average, by 10-11 kcal/mol. In agreement with NMR studies, an 11 ns molecular dynamics treatment for PTX in an explicit water pool locates T-Taxol along the trajectory, but not PTX-NY. Docking of various PTX conformers into the electron crystallographic binding site of tubulin demonstrates that PTX-NY cannot be accommodated unless the pocket is reorganized in violation of the experimental constraints. Finally, analysis of the structures of T-Taxol and PTX-NY for their capacity to predict the existence of superpotent PTX analogues discloses that only the former forecasts such analogues, as now established by the T-Taxol-inspired synthesis of bridged taxanes. In sum, all empirical criteria support T-Taxol as the bound conformation of PTX on beta-tubulin in microtubules.

  20. CALCIUM REQUIREMENT AFTER PARATHYROIDECTOMY (PTX IN SECONDARY HYPERPARATHYROIDISM (2° HPT

    Directory of Open Access Journals (Sweden)

    YJ Kwon

    2012-06-01

    Full Text Available After PTX in 2°HPT, appropriate calcium and calcitriol was supplied to prevent hungry bone syndrome. Duration of admission was variable according to multiple causes. We hypothesized the admission duration was mainly affected by calcium requirement. The aims of this study were to evaluate PTX in 2°HPT in single center and to make equation for calcium requirement. We evaluated 91 patients with 94 PTX from Nov. 2003 to Dec.2011 in Korea Univ. Guro Hospital. We retrieved demographic details including sex, age, body weight, DM, hypertension, mode of renal replacement therapy, duration of dialysis, duration of admission, mode of PTX, method of anesthetics, number of glands removed, the largest gland length, the heaviest gland, and histologic profile of removed gland. We also gathered preoperative and postoperative (12 hrs and 48 hrs after PTX, discharge, 3 mo, 6 mo, 1 yr after PTX laboratory data such as calcium, phosphorus, iPTH, ALP, albumin, and Hb. We summated oral and intravenous calcium supplement during hospitalization after PTX. We prescribed oral calcitriol 2.0 μg/day after PTX. Statistical analysis was performed with SPSS ver. 12.0.1. We could find log(calcium total supplement during admission is correlated with preoperative ALP (p=0.000, preoperative iPTH (p+0.037, and Δ phosphorus 48 hrs after PTX (p=0.000 by multiple linear regression. Log (calcium total supplement during admission = 2.576 + 0.001 X preoperative ALP + 3.575 X 10-5 X preoperative iPTH + 0.06 X Δphosphorus 48 hrs after PTX. We believe this equation would be helpful to estimate calcium requirements after 48 hrs PTX and to give a clue about length of hospitalization. We also would evaluate whether this equation is predictable in our patients in the future.

  1. Mesenchymal Stromal Cell-Derived PTX3 Promotes Wound Healing via Fibrin Remodeling.

    Science.gov (United States)

    Cappuzzello, Claudia; Doni, Andrea; Dander, Erica; Pasqualini, Fabio; Nebuloni, Manuela; Bottazzi, Barbara; Mantovani, Alberto; Biondi, Andrea; Garlanda, Cecilia; D'Amico, Giovanna

    2016-01-01

    Although mesenchymal stromal cells (MSCs) can promote wound healing in different clinical settings, the underlying mechanism of MSC-mediated tissue repair has yet to be determined. Because a nonredundant role of pentraxin 3 (PTX3) in tissue repair and remodeling has been recently described, here we sought to determine whether MSC-derived PTX3 might play a role in wound healing. Using a murine model of skin repair, we found that Ptx3-deficient (Ptx3(-/-)) MSCs delayed wound closure and reduced granulation tissue formation compared with wt MSCs. At day 2, confocal microscopy revealed a dramatic reduction in green fluorescent protein (GFP)-expressing Ptx3(-/-) MSCs recruited to the wound, where they appeared to be not only poorly organized in bundles but also scattered in the extracellular matrix. These findings were further confirmed by quantitative biochemical analysis of GFP content in wound extracts. Furthermore, Ptx3(-/-) MSC-treated skins displayed increased levels of fibrin and lower levels of D-dimer, suggesting delayed fibrin-rich matrix remodeling compared with control skins. Consistently, both pericellular fibrinolysis and migration through fibrin were found to be severely affected in Ptx3(-/-) MSCs. Overall, our findings identify an essential role of MSC-derived PTX3 in wound repair underscoring the beneficial potential of MSC-based therapy in the management of intractable wounds.

  2. Interactions of the humoral pattern recognition molecule PTX3 with the complement system

    DEFF Research Database (Denmark)

    Doni, Andrea; Garlanda, Cecilia; Bottazzi, Barbara

    2012-01-01

    The innate immune system comprises a cellular and a humoral arm. The long pentraxin PTX3 is a fluid phase pattern recognition molecule, which acts as an essential component of the humoral arm of innate immunity. PTX3 has antibody-like properties including interactions with complement components. ...

  3. The long pentraxin PTX3 as a link among innate immunity, inflammation, and female fertility.

    Science.gov (United States)

    Bottazzi, Barbara; Bastone, Antonio; Doni, Andrea; Garlanda, Cecilia; Valentino, Sonia; Deban, Livija; Maina, Virginia; Cotena, Alessia; Moalli, Federica; Vago, Luca; Salustri, Antonietta; Romani, Luigina; Mantovani, Alberto

    2006-05-01

    The long pentraxin 3 (PTX3) is member of a complex superfamily of multifunctional proteins characterized by a cyclic multimeric structure. PTX3 is highly conserved in evolution and is produced by innate-immunity cells in response to proinflammatory signals and Toll-like receptor engagement. PTX3 plays complex, nonredundant functions in vivo, acting as a predecessor of antibodies, recognizing microbes, activating complement, facilitating pathogen recognition by phagocytes, and hence, playing a nonredundant role in resistance against selected pathogens. In addition, PTX3 is essential in female fertility by acting as a nodal point for the assembly of the cumulus oophorus hyaluronan-rich extracellular matrix. Thus, the prototypic long pentraxin PTX3 is a multifunctional, soluble pattern recognition receptor acting as a nonredundant component of the humoral arm of innate immunity and involved in matrix deposition and female fertility.

  4. PTX3, a humoral pattern recognition molecule at the interface between microbe and matrix recognition.

    Science.gov (United States)

    Garlanda, Cecilia; Jaillon, Sebastien; Doni, Andrea; Bottazzi, Barbara; Mantovani, Alberto

    2016-02-01

    Innate immunity consists of a cellular and a humoral arm. PTX3 is a fluid patter recognition molecule (PRM) with antibody-like properties. Gene targeted mice and genetic associations in humans suggest that PTX3 plays a non-redundant role in resistance against selected pathogens (e.g. Aspergillus fumigatus, Pseudomonas aeruginosa, uropathogenic Escherichia coli) and in the regulation of inflammation. PTX3 acts as an extrinsic oncosuppressor by taming complement elicited tumor-promoting inflammation. Recent results indicate that, by interacting with provisional matrix components, PTX3 contributes to the orchestration of tissue repair. An acidic pH sets PTX3 in a tissue repair mode, while retaining anti-microbial recognition. Based on these data and scattered information on humoral PRM and matrix components, we surmise that matrix and microbial recognition are related functions in evolution. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. Effect of ptxA and ptxB genes of phosphotransferase system on growth ofStreptococcus mutans%变异链球菌磷酸转移酶系统ptxA、ptxB基因对细菌生长能力的影响

    Institute of Scientific and Technical Information of China (English)

    吴昕彧; 陈晓丹; 赵望泓; 侯晋; 陈璇

    2016-01-01

    目的:研究变异链球菌(S. mutans)磷酸转移酶系统(PTS)中抗坏血酸家族ptxA、ptxB基因对细菌生长能力的影响。方法构建ptxA、ptxB和ptxAB双重基因缺陷菌株以及ptxAB功能补偿菌株。在仅以抗坏血酸作为唯一碳源时,使用实时荧光定量聚合酶链反应检测野生株中ptxA、ptxB基因的表达情况。连续监测野生株、缺陷株和补偿株的菌液OD600值,比较其生长能力。结果经过聚合酶链反应和测序鉴定,结果证明缺陷株和补偿株构建成功。在以抗坏血酸作为唯一碳源的培养基中,野生株ptxA、ptxB基因的表达量均明显增高(P<0.01)。缺陷株的生长能力较野生株有所下降,但是在补偿株中可以得到补偿。结论ptxA、ptxB基因与S. mutans对抗坏血酸的吸收利用密切相关,缺陷株和补偿株的构建为进一步研究目的基因在S. mutans抗坏血酸代谢中的作用机制提供了理论基础。%Objective This study aims to evaluate the effect of ptxA and ptxB genes, which are important genes in the L-ascorbate phosphotransferase system (PTS) of Streptococcus mutans (S. mutans). Methods The ptxA-, ptxB-, and ptxABdouble deficient mutant as well as ptxAB-complemented strain were constructed. Quantitative real-time polymerase chain reaction analysis was performed to evaluate the expression of the target genes of wild-type S. mutans when L-ascorbate was used as the sole carbohydrate source. The OD600 values of the wild type, deficient, and complemented strains were continuously monitored, and their growth curves were constructed to compare growth capacity. Results Polymerase chain reaction and sequencing analyses suggested that deficient and complemented strains were successfully constructed. The expression levels of ptxA and ptxB significantly increased (P<0.01) when L-ascorbate was used as the sole carbohydrate source. The growth capacity of the deficient mutants decreased compared with

  6. An acidic microenvironment sets the humoral pattern recognition molecule PTX3 in a tissue repair mode.

    Science.gov (United States)

    Doni, Andrea; Musso, Tiziana; Morone, Diego; Bastone, Antonio; Zambelli, Vanessa; Sironi, Marina; Castagnoli, Carlotta; Cambieri, Irene; Stravalaci, Matteo; Pasqualini, Fabio; Laface, Ilaria; Valentino, Sonia; Tartari, Silvia; Ponzetta, Andrea; Maina, Virginia; Barbieri, Silvia S; Tremoli, Elena; Catapano, Alberico L; Norata, Giuseppe D; Bottazzi, Barbara; Garlanda, Cecilia; Mantovani, Alberto

    2015-06-01

    Pentraxin 3 (PTX3) is a fluid-phase pattern recognition molecule and a key component of the humoral arm of innate immunity. In four different models of tissue damage in mice, PTX3 deficiency was associated with increased fibrin deposition and persistence, and thicker clots, followed by increased collagen deposition, when compared with controls. Ptx3-deficient macrophages showed defective pericellular fibrinolysis in vitro. PTX3-bound fibrinogen/fibrin and plasminogen at acidic pH and increased plasmin-mediated fibrinolysis. The second exon-encoded N-terminal domain of PTX3 recapitulated the activity of the intact molecule. Thus, a prototypic component of humoral innate immunity, PTX3, plays a nonredundant role in the orchestration of tissue repair and remodeling. Tissue acidification resulting from metabolic adaptation during tissue repair sets PTX3 in a tissue remodeling and repair mode, suggesting that matrix and microbial recognition are common, ancestral features of the humoral arm of innate immunity. © 2015 Doni et al.

  7. The yin-yang of long pentraxin PTX3 in inflammation and immunity.

    Science.gov (United States)

    Daigo, Kenji; Mantovani, Alberto; Bottazzi, Barbara

    2014-09-01

    Pentraxins are a family of multimeric proteins characterized by the presence of a pentraxin signature in their C-terminus region. Based on the primary structure, pentraxins are divided into short and long pentraxin: C-reactive protein (CRP) is the prototype of the short pentraxin subfamily while pentraxin 3 (PTX3) is the prototypic long pentraxin. Despite these two molecules exert similar fundamental actions in the regulation of innate immune and inflammatory responses, several differences exist between CRP and PTX3, including gene organization, protein oligomerization and expression pattern. The pathophysiological roles of PTX3 have been investigated using genetically modified mice since PTX3 gene organization and regulation are well conserved between mouse and human. Such in vivo studies figured out that PTX3 mainly have host-protective effects, even if it could also exert negative effects under certain pathophysiologic conditions. Here we will review the general properties of CRP and PTX3, emphasizing the differences between the two molecules and the regulatory functions exerted by PTX3 in innate immunity and inflammation. Copyright © 2014 Elsevier B.V. All rights reserved.

  8. Human pentraxin 3 (PTX3 as a novel biomarker for the diagnosis of pulmonary arterial hypertension.

    Directory of Open Access Journals (Sweden)

    Yuichi Tamura

    Full Text Available BACKGROUND: Although inflammation is an important feature of pulmonary arterial hypertension (PAH, the usefulness of local inflammatory markers as biomarkers for PAH is unknown. In this study, we tested whether plasma concentrations of human pentraxin 3 (PTX3, a local inflammatory marker, would be a useful biomarker for detecting PAH. METHODS: Plasma PTX3 concentrations were evaluated in 50 PAH patients (27 with idiopathic PAH, 17 with PAH associated with connective tissue disease (CTD-PAH, and six with congenital heart disease, 100 age and sex-matched healthy controls, and 34 disease-matched CTD patients without PAH. Plasma concentrations of B-type natriuretic peptide (BNP and C-reactive protein (CRP were also determined. RESULTS: Mean PTX3 levels were significantly higher in all PAH patients than in the healthy controls (4.40±0.37 vs. 1.94±0.09 ng/mL, respectively; P<0.001. Using a threshold level of 2.84 ng/mL, PTX3 yielded a sensitivity of 74.0% and a specificity of 84.0% for the detection of PAH. In CTD-PAH patients, mean PTX3 concentrations were significantly higher than in CTD patients without PAH (5.02±0.69 vs. 2.40±0.14 ng/mL, respectively; P<0.001. There was no significant correlation between plasma levels of PTX3 and BNP or CRP. Receiver operating characteristic (ROC curves for screening PAH in patients with CTD revealed that PTX3 (area under the ROC curve 0.866 is superior to BNP. Using a PTX3 threshold of 2.85 ng/mL maximized true-positive and false-negative results (sensitivity 94.1%, specificity 73.5%. CONCLUSION: Plasma concentrations of PTX3 may be a better biomarker of PAH than BNP, especially in patients with CTD.

  9. The role of the acute phase protein PTX3 in the ventilator-induced lung injury

    Directory of Open Access Journals (Sweden)

    JM Real

    2008-06-01

    Full Text Available The pentraxin 3 (PTX3 is an acute phase proinflammatory protein produced by fibroblasts and alveolar epithelial cells. We have previously demonstrated that PTX3 is a key modulator of inflammation. Mechanical ventilation (MV is a life saving therapeutic approach for patients with acute lung injury that, nevertheless could lead to an inflammatory response and tissue injury (ventilator-induced lung injury: VILI, representing a major cause of iatrogenic lung damage in intensive units. Our objective was to investigate the role of PTX3 in VILI. PTX3 transgenic, knockout and Wt control mice (n = 12/group were ventilated (45ml·kg–1 until respiratory system Elastance increased 50% (Ers150%, an indicator of VILI. Histological analysis demonstrated that using a Ers150% was appropriate for our analysis since identical degrees of inflammation were observed in Tg, KO and Wt mice as assessed by leukocyte infiltration, oedema, alveolar collapse and number of breaks in alveolar septa. However, Tg mice reached Ers150% faster than Wt controls (p = 0.0225. We also showed that the lack of PTX3 does not abolish the occurrence of VILI in KOs. Gene expression profile of PTX3, IL-1beta, IL-6, KC, IFNgamma, TGFbeta and PCIII were investigated by QPCR. MV drastically up modulated PTX3 as well as IL-1beta, IL-6, IFNgamma and KC. Alternatively, mice were ventilated for 20, 40 and 60 min. The faster kinetics of Tg mice to reach Ers150% was accompanied by an earlier augmentation of IL-1b and PTX3 expression. The kinetics of local PTX3 expression in the lungs of ventilated mice strongly suggests the involvement of this pentraxin in the pathogenesis of VILI.

  10. Bimetallic PtxCoy nanoparticles with curved faces for highly efficient hydrogenation of cinnamaldehyde

    Science.gov (United States)

    Gu, Yan; Zhao, Yonghui; Wu, Panpan; Yang, Bo; Yang, Nating; Zhu, Yan

    2016-05-01

    The control of the curved structure of bimetallic nanocrystals is a challenge, due to the rate differential for atom deposition and surface diffusion of alien atomic species on specific crystallographic planes of seeds. Herein, we report how to tune the degree of concavity of bimetallic PtxCoy concave nanoparticles using carboxylic acids as surfactants with an oleylamine system, leading to the specific crystallographic planes being exposed. The terminal carboxylic acids with a bridge ring or a benzene ring serving as structure regulators could direct the formation of curved faces with exposed high-index facets, and long-chain saturated fatty acids favored the production of curved faces with exposed low-index facets, while long-chain olefin acids alone benefited the formation of a flat surface with exposed low-index planes. Furthermore, these PtxCoy particles with curved faces displayed superior catalytic behaviour to cinnamaldehyde hydrogenation when compared with PtxCoy with flat faces. PtxCoy nanoparticles with curved faces exhibited over 6-fold increase in catalytic activity compared to PtxNiy nanoparticles with curved faces, and near 40-fold activity increase was observed in comparison with PtxFey nanoparticles with curved faces.The control of the curved structure of bimetallic nanocrystals is a challenge, due to the rate differential for atom deposition and surface diffusion of alien atomic species on specific crystallographic planes of seeds. Herein, we report how to tune the degree of concavity of bimetallic PtxCoy concave nanoparticles using carboxylic acids as surfactants with an oleylamine system, leading to the specific crystallographic planes being exposed. The terminal carboxylic acids with a bridge ring or a benzene ring serving as structure regulators could direct the formation of curved faces with exposed high-index facets, and long-chain saturated fatty acids favored the production of curved faces with exposed low-index facets, while long

  11. Exploring PTX3 expression in Sus scrofa cardiac tissue using RNA sequencing.

    Science.gov (United States)

    Cabiati, Manuela; Caselli, Chiara; Savelli, Sara; Prescimone, Tommaso; Lionetti, Vincenzo; Giannessi, Daniela; Del Ry, Silvia

    2012-02-10

    The prototypic long pentraxin PTX3 is a novel vascular inflammatory marker sharing similarities with the classic short pentraxin (C-reactive protein). PTX3 is rapidly produced and released by several cell types in response to local inflammation of the cardiovascular system. Plasma PTX3 levels are very low in normal conditions and increase in heart failure (HF) patients with advancing NYHA functional class, but its exact role during HF pathogenetic mechanisms is not yet established. No data about PTX3 cardiac expression in normal and pathological conditions are currently available, either in human or in large-size animals. Of the latter, the pig has a central role in "in vivo" clinical settings but its genome has not been completely sequenced and the PTX3 gene sequence is still lacking. The aim of this study was to sequence the PTX3 in Sus scrofa, whose sequence is not yet present in GenBank. Utilizing our knowledge of this sequence, PTX3 mRNA expression was evaluated in cardiac tissue of normal (n=6) and HF pigs (n=5), obtained from the four chambers. To sequence PTX3 gene in S. scrofa, the high homology between Homo sapiens and S. scrofa was exploited. Pig PTX3 mRNA was sequenced using polymerase chain reaction primers designed from human consensus sequences. The DNA, obtained from different RT-PCR reactions, was sequenced using the Sanger method. S. scrofa PTX3 mRNA, 1-336 bp, was submitted to GenBank (ID: GQ412351). The sequence obtained from pig cardiac tissue shared an 84% sequence identity with human homolog. The presence of PTX3 mRNA expression was detected in all the cardiac chambers sharing an increase after 3 weeks of pacing compared to controls (p=0.036 HF right atrium vs. N; p=0.022, HF left ventricle vs. N). Knowledge of the PTX3 sequence could be a useful starting point for future studies devoted to better understanding the specific role of this molecule in the pathogenesis of cardiovascular diseases.

  12. Nanoparticles Containing High Loads of Paclitaxel-Silicate Prodrugs: Formulation, Drug Release, and Anticancer Efficacy.

    Science.gov (United States)

    Han, Jing; Michel, Andrew R; Lee, Han Seung; Kalscheuer, Stephen; Wohl, Adam; Hoye, Thomas R; McCormick, Alon V; Panyam, Jayanth; Macosko, Christopher W

    2015-12-07

    We have investigated particle size, interior structure, drug release kinetics, and anticancer efficacy of PEG-b-PLGA-based nanoparticles loaded with a series of paclitaxel (PTX)-silicate prodrugs [PTX-Si(OR)3]. Silicate derivatization enabled us to adjust the hydrophobicity and hydrolytic lability of the prodrugs by the choice of the alkyl group (R) in the silicate derivatives. The greater hydrophobicity of these prodrugs allows for the preparation of nanoparticles that are stable in aqueous dispersion even when loaded with up to ca. 75 wt % of the prodrug. The hydrolytic lability of silicates allows for facile conversion of prodrugs back to the parent drug, PTX. A suite of eight PTX-silicate prodrugs was investigated; nanoparticles were made by flash nanoprecipitation (FNP) using a confined impingement jet mixer with a dilution step (CIJ-D). The resulting nanoparticles were 80-150 nm in size with a loading level of 47-74 wt % (wt %) of a PTX-silicate, which corresponds to 36-59 effective wt % of free PTX. Cryogenic transmission electron microscopy images show that particles are typically spherical with a core-shell structure. Prodrug/drug release profiles were measured. Release tended to be slower for prodrugs having greater hydrophobicity and slower hydrolysis rate. Nanoparticles loaded with PTX-silicate prodrugs that hydrolyze most rapidly showed in vitro cytotoxicity similar to that of the parent PTX. Nanoparticles loaded with more labile silicates also tended to show greater in vivo efficacy.

  13. Pentraxin 3 (PTX3 expression in allergic asthmatic airways: role in airway smooth muscle migration and chemokine production.

    Directory of Open Access Journals (Sweden)

    Jingbo Zhang

    Full Text Available BACKGROUND: Pentraxin 3 (PTX3 is a soluble pattern recognition receptor with non-redundant functions in inflammation and innate immunity. PTX3 is produced by immune and structural cells. However, very little is known about the expression of PTX3 and its role in allergic asthma. OBJECTIVES AND METHODS: We sought to determine the PTX3 expression in asthmatic airways and its function in human airway smooth muscle cells (HASMC. In vivo PTX3 expression in bronchial biopsies of mild, moderate and severe asthmatics was analyzed by immunohistochemistry. PTX3 mRNA and protein were measured by real-time RT-PCR and ELISA, respectively. Proliferation and migration were examined using (3H-thymidine incorporation, cell count and Boyden chamber assays. RESULTS: PTX3 immunoreactivity was increased in bronchial tissues of allergic asthmatics compared to healthy controls, and mainly localized in the smooth muscle bundle. PTX3 protein was expressed constitutively by HASMC and was significantly up-regulated by TNF, and IL-1β but not by Th2 (IL-4, IL-9, IL-13, Th1 (IFN-γ, or Th-17 (IL-17 cytokines. In vitro, HASMC released significantly higher levels of PTX3 at the baseline and upon TNF stimulation compared to airway epithelial cells (EC. Moreover, PTX3 induced CCL11/eotaxin-1 release whilst inhibited the fibroblast growth factor-2 (FGF-2-driven HASMC chemotactic activity. CONCLUSIONS: Our data provide the first evidence that PTX3 expression is increased in asthmatic airways. HASMC can both produce and respond to PTX3. PTX3 is a potent inhibitor of HASMC migration induced by FGF-2 and can upregulate CCL11/eotaxin-1 release. These results raise the possibility that PTX3 may play a dual role in allergic asthma.

  14. QDP-JIT/PTX: A QDP++ Implementation for CUDA-Enabled GPUs

    Energy Technology Data Exchange (ETDEWEB)

    Winter, Frank T. [JLAB; Edwards, Robert G. [JLAB

    2014-11-01

    These proceedings describe briefly the QDP-JIT/PTX framework for lattice field theory calcula- tions on the CUDA architecture. The framework generates compute kernels in the PTX assembler language which can be compiled to efficient GPU machine code by the NVIDIA JIT compiler. A comprehensive memory management was added to the framework so that applications, e.g. Chroma, can run unaltered on GPU clusters and supercomputers.

  15. The enhanced activity of mass-selected PtxGd nanoparticles for oxygen electroreduction

    DEFF Research Database (Denmark)

    Velazquez-Palenzuela, Amado Andres; Masini, Federico; Pedersen, Anders Filsøe

    2015-01-01

    , as suggested by the accelerated stability tests under ORR potential cycling. Extended X-ray absorption fine structure (EXAFS) spectroscopy measurements confirm that as-prepared PtxGd NPs are compressively strained, relative to pure Pt, and that a PtxGd core/Pt-rich shell structure is adopted after partial Gd......, and their catalytic performance toward the ORR is assessed in acidic media using a half-cell configuration. The PtxGd 8-nm catalyst shows a high activity (3.6A(mgPt)−1), surpassing the highest activity reached so far with PtxY NP catalysts. In addition, the optimum PtxGd catalyst also presents high stability...... leaching. The activity correlates strongly with the compressive strain. On that basis, we propose that the ORR enhancement is due to the compressive strain within the Pt shell induced by the alloy core. The results herein confirm the suitability of PtxGd NPs as cathode nanocatalysts for proton exchange...

  16. Bimetallic PtxCoy nanoparticles with curved faces for highly efficient hydrogenation of cinnamaldehyde.

    Science.gov (United States)

    Gu, Yan; Zhao, Yonghui; Wu, Panpan; Yang, Bo; Yang, Nating; Zhu, Yan

    2016-06-07

    The control of the curved structure of bimetallic nanocrystals is a challenge, due to the rate differential for atom deposition and surface diffusion of alien atomic species on specific crystallographic planes of seeds. Herein, we report how to tune the degree of concavity of bimetallic PtxCoy concave nanoparticles using carboxylic acids as surfactants with an oleylamine system, leading to the specific crystallographic planes being exposed. The terminal carboxylic acids with a bridge ring or a benzene ring serving as structure regulators could direct the formation of curved faces with exposed high-index facets, and long-chain saturated fatty acids favored the production of curved faces with exposed low-index facets, while long-chain olefin acids alone benefited the formation of a flat surface with exposed low-index planes. Furthermore, these PtxCoy particles with curved faces displayed superior catalytic behaviour to cinnamaldehyde hydrogenation when compared with PtxCoy with flat faces. PtxCoy nanoparticles with curved faces exhibited over 6-fold increase in catalytic activity compared to PtxNiy nanoparticles with curved faces, and near 40-fold activity increase was observed in comparison with PtxFey nanoparticles with curved faces.

  17. PTX3 binds MD-2 and promotes TRIF-dependent immune protection in aspergillosis.

    Science.gov (United States)

    Bozza, Silvia; Campo, Silvia; Arseni, Brunilde; Inforzato, Antonio; Ragnar, Lindstedt; Bottazzi, Barbara; Mantovani, Alberto; Moretti, Silvia; Oikonomous, Vasileios; De Santis, Rita; Carvalho, Agostinho; Salvatori, Giovanni; Romani, Luigina

    2014-09-01

    The long pentraxin 3 (PTX3) modulates different effector pathways involved in innate resistance to Aspergillus fumigatus, including complement activation or promotion of phagocytosis by interacting with FcγRs. However, whether and how TLRs modulate PTX3 mediates antifungal resistance is not known. In this study, we demonstrate that PTX3 binds myeloid differentiation protein 2 (MD-2) in vitro and exerts its protective antifungal activity in vivo through TLR4/MD-2-mediated signaling. Similar to Tlr4(-/-) mice, Md2(-/-) mice displayed high susceptibility to pulmonary aspergillosis, a phenotype associated with a proinflammatory cytokine profile and impaired antifungal activity of polymorphonuclear neutrophils. Treating Md2(-/-) mice with PTX3 failed to confer immune protection against the fungus, whereas adoptive transfer of MD-2-competent polymorphonuclear neutrophils restored it. Mechanistically, engagement of MD-2 by PTX3-opsonized Aspergillus conidia activated the TLR4/Toll/IL-1R domain-containing adapter inducing IFN-β-dependent signaling pathway converging on IL-10. Thus, we have identified a novel receptor mechanism, involving the TLR4/MD-2/Toll/IL-1R domain-containing adapter inducing IFN-β-mediated signaling, whereby PTX3 elicits antifungal resistance with limited immunopathology in A. fumigatus infection. Copyright © 2014 by The American Association of Immunologists, Inc.

  18. Pentraxins in innate immunity: from C-reactive protein to the long pentraxin PTX3.

    Science.gov (United States)

    Mantovani, Alberto; Garlanda, Cecilia; Doni, Andrea; Bottazzi, Barbara

    2008-01-01

    Pentraxins are a family of multimeric pattern-recognition proteins highly conserved in evolution. Based on the primary structure of the subunit, the pentraxins are divided into two groups: short pentraxins and long pentraxins. C-reactive protein and serum amyloid P-component are classic short pentraxins produced in the liver, whereas the prototype of the long pentraxin family is PTX3. Innate immunity cells and vascular cells produce PTX3 in response to proinflammatory signals and Toll-like receptor engagement. PTX3 interacts with several ligands, including growth factors, extracellular matrix components, and selected pathogens, playing a role in complement activation, facilitating pathogen recognition, and acting as a predecessor of antibodies. In addition, PTX3 is essential in female fertility acting on the assembly of the cumulus oophorus extracellular matrix. Thus, PTX3 is a multifunctional soluble pattern recognition receptor acting as a nonredundant component of the humoral arm of innate immunity and involved in tuning inflammation, in matrix deposition and female fertility. Evidence suggests that PTX3 is a useful new serological marker, rapidly reflecting tissue inflammation and damage under diverse clinical conditions.

  19. Novel free paclitaxel-loaded poly(L-γ-glutamylglutamine–paclitaxel nanoparticles

    Directory of Open Access Journals (Sweden)

    Danbo Yang

    2011-01-01

    Full Text Available Danbo Yang1, Sang Van2, Xinguo Jiang3, Lei Yu1,21Biomedical Engineering and Technology Institute, Institutes for Advanced Interdisciplinary Research, East China Normal University, Shanghai, People's Republic of China; 2Biomedical Group, Nitto Denko Technical Corporation, Oceanside, CA, USA; 3School of Pharmacy, Fudan University, Shanghai, People's Republic of ChinaAbstract: The purpose of this study was to develop a novel formulation of paclitaxel (PTX that would improve its therapeutic index. Here, we combined a concept of polymer–PTX drug conjugate with a concept of polymeric micelle drug delivery to form novel free PTX-loaded poly(L-γ-glutamylglutamine (PGG–PTX conjugate nanoparticles. The significance of this drug formulation emphasizes the simplicity, novelty, and flexibility of the method of forming nanoparticles that contain free PTX and conjugated PTX in the same drug delivery system. The results of effectively inhibiting tumor growth in mouse models demonstrated the feasibility of the nanoparticle formulation. The versatility and potential of this dual PTX drug delivery system can be explored with different drugs for different indications. Novel and simple formulations of PTX-loaded PGG–PTX nanoparticles could have important implications in translational medicines.Keywords: paclitaxel, polymeric micelle, poly(L-γ-glutamylglutamine–paclitaxel, nanoconjugate, nanoparticles

  20. The pentraxins PTX3 and SAP in innate immunity, regulation of inflammation and tissue remodelling.

    Science.gov (United States)

    Bottazzi, Barbara; Inforzato, Antonio; Messa, Massimo; Barbagallo, Marialuisa; Magrini, Elena; Garlanda, Cecilia; Mantovani, Alberto

    2016-06-01

    Pentraxins are a superfamily of fluid phase pattern recognition molecules conserved in evolution and characterized by a cyclic multimeric structure. C-reactive protein (CRP) and serum amyloid P component (SAP) constitute the short pentraxin arm of the superfamily. CRP and SAP are produced in the liver in response to IL-6 and are acute phase reactants in humans and mice respectively. In addition SAP has been shown to affect tissue remodelling and fibrosis by stabilizing all types of amyloid fibrils and by regulating monocyte to fibrocyte differentiation. Pentraxin 3 (PTX3) is the prototype of the long pentraxin arm. Gene targeted mice and genetic and epigenetic studies in humans suggest that PTX3 plays essential non-redundant roles in innate immunity and inflammation as well as in tissue remodelling. Recent studies have revealed the role of PTX3 as extrinsic oncosuppressor, able to tune cancer-related inflammation. In addition, at acidic pH PTX3 can interact with provisional matrix components promoting inflammatory matrix remodelling. Thus acidification during tissue repair sets PTX3 in a tissue remodelling and repair mode, suggesting that matrix and microbial recognition are common, ancestral features of the humoral arm of innate immunity. Copyright © 2016 European Association for the Study of the Liver. Published by Elsevier B.V. All rights reserved.

  1. Novel aptamer-nanoparticle bioconjugates enhances delivery of anticancer drug to MUC1-positive cancer cells in vitro.

    Directory of Open Access Journals (Sweden)

    Chenchen Yu

    Full Text Available MUC1 protein is an attractive target for anticancer drug delivery owing to its overexpression in most adenocarcinomas. In this study, a reported MUC1 protein aptamer is exploited as the targeting agent of a nanoparticle-based drug delivery system. Paclitaxel (PTX loaded poly (lactic-co-glycolic-acid (PLGA nanoparticles were formulated by an emulsion/evaporation method, and MUC1 aptamers (Apt were conjugated to the particle surface through a DNA spacer. The aptamer conjugated nanoparticles (Apt-NPs are about 225.3 nm in size with a stable in vitro drug release profile. Using MCF-7 breast cancer cell as a MUC1-overexpressing model, the MUC1 aptamer increased the uptake of nanoparticles into the target cells as measured by flow cytometry. Moreover, the PTX loaded Apt-NPs enhanced in vitro drug delivery and cytotoxicity to MUC1(+ cancer cells, as compared with non-targeted nanoparticles that lack the MUC1 aptamer (P<0.01. The behavior of this novel aptamer-nanoparticle bioconjugates suggests that MUC1 aptamers may have application potential in targeted drug delivery towards MUC1-overexpressing tumors.

  2. Mobilization of Bacillus thuringiensis plasmid pTX14-3.

    Science.gov (United States)

    Andrup, L; Bendixen, H H; Jensen, G B

    1995-05-01

    The Bacillus thuringiensis subsp. israelensis (Bti) plasmid pTX14-3 has been reported to contain a gene, mob14-3, with considerable homology to genes encoding mobilization proteins from other gram-positive bacteria. We have used the aggregation-mediated conjugation system recently discovered in Bti to compare the mobilization kinetics of different derivatives of plasmid pTX14-3. Plasmid pTX14-3 has been found to replicate by the rolling-circle mechanism and to contain a locus suppressing the formation of high-molecular-weight DNA. We found that deleting a DNA fragment containing this locus increased the transfer frequency about twofold. The mobilization frequency of the plasmid containing the intact mob14-3 gene did not indicate a mobilization-enhancing activity of the encoded polypeptide. However, the presence of the mob14-3 gene seemed to increase the stability of the plasmid in exponential growth.

  3. PTX3 is up-regulated in epithelial mammary cells during S. aureus intramammary infection in goat

    Directory of Open Access Journals (Sweden)

    Joel Fernando Soares Filipe

    2015-07-01

    PTX3 was up-regulated in epithelial mammary cells and in milk cells after S. aureus infection, demonstrating that it represents a first line of immune defense in goat udder. No modulation was observed in macrophages, in the secretum and in the ductal epithelial cells. Further experiments are needed to elucidate the role of PTX3 in the pathogenesis of S. aureus infection.

  4. Dual drug-loaded paclitaxel–thymoquinone nanoparticles for effective breast cancer therapy

    Energy Technology Data Exchange (ETDEWEB)

    Soni, Parth; Kaur, Jasmine; Tikoo, Kulbhushan, E-mail: tikoo.k@gmail.com [National Institute of Pharmaceutical Education and Research (NIPER), Laboratory of Epigenetics and Diseases, Department of Pharmacology and Toxicology (India)

    2015-01-15

    The present study highlights the beneficial synergistic blend of anticancer drug paclitaxel (PTX) and thymoquinone (TQ) in MCF-7 breast cancer cells. We aimed to augment the therapeutic index of PTX using a polymeric nanoparticle system loaded with PTX and TQ. PLGA nanoparticles encapsulating the two drugs, individually or in combination, were prepared by single emulsion solvent evaporation method. The formulated nanoparticles were homogenous with an overall negative charge and their size ranging between 200 and 300 nm. Entrapment efficiency of PTX and TQ in the dual drug-loaded nanoparticles was found to be 82.4 ± 2.18 and 65.8 ± 0.45 %, respectively. The release kinetics of PTX and TQ from the nanoparticles exhibited a biphasic pattern characterised by an initial burst, followed by a gradual and continuous release. The anticancer activity of nanoparticles encapsulating both the drugs was higher as compared to the free drugs in MCF-7 breast cancer cells. The combination index for the dual drug-loaded NPs was found to be 0.688 which is indicative of synergistic interaction. Thus, here, we propose the synthesis and use of dual drug-loaded TQ and PTX NPs which exhibits enhanced anticancer activity and can additionally help to alleviate the toxic effects of PTX by lowering its effective dose.

  5. The Long Pentraxin PTX3 Is Crucial for Tissue Inflammation after Intestinal Ischemia and Reperfusion in Mice

    Science.gov (United States)

    Souza, Danielle G.; Amaral, Flavio A.; Fagundes, Caio T.; Coelho, Fernanda M.; Arantes, Rosa M.E.; Sousa, Lirlandia P.; Matzuk, Martin M.; Garlanda, Cecília; Mantovani, Alberto; Dias, Adriana A.; Teixeira, Mauro M.

    2009-01-01

    The pentraxin superfamily is a group of evolutionarily conserved proteins that play important roles in the immune system. The long pentraxin PTX3 protein was originally described as able to be induced by pro-inflammatory stimuli in a variety of cell types. In this study, we evaluated the phenotype of Ptx3−/− mice subjected to ischemia followed by reperfusion of the superior mesenteric artery. In reperfused wild-type mice, there was significant local and remote injury as demonstrated by increases in vascular permeability, neutrophil influx, nuclear factor-κB activation, and production of CXCL1 and tumor necrosis factor-α. PTX3 levels were elevated in both serum and intestine after reperfusion. In Ptx3−/− mice, local and remote tissue injury was inhibited, and there were decreased nuclear factor-κB translocation and cytokine production. Intestinal architecture was preserved, and there were decreased neutrophil influx and significant prevention of lethality in Ptx3−/− mice as well. PTX3 given intravenously before reperfusion reversed the protection observed in Ptx3−/− mice in a dose-dependent manner, and PTX3 administration significantly worsened tissue injury and lethality in wild-type mice. In conclusion, our studies demonstrate a major role for PTX3 in determining acute reperfusion-associated inflammation, tissue injury, and lethality and suggest the soluble form of this molecule is active in this system. Therapeutic blockade of PTX3 action may be useful in the control of the injuries associated with severe ischemia and reperfusion syndromes. PMID:19286566

  6. Paclitaxel-loaded star-shaped copolymer nanoparticles for enhanced malignant melanoma chemotherapy against multidrug resistance

    Science.gov (United States)

    Su, Yongsheng; Hu, Jian; Huang, Zhibin; Huang, Yubin; Peng, Bingsheng; Xie, Ni; Liu, Hui

    2017-01-01

    Malignant melanoma (MM) is the most dangerous type of skin cancer with annually increasing incidence and death rates. However, chemotherapy for MM is restricted by low topical drug concentration and multidrug resistance. In order to surmount the limitation and to enhance the therapeutic effect on MM, a new nanoformulation of paclitaxel (PTX)-loaded cholic acid (CA)-functionalized star-shaped poly(lactide-co-glycolide) (PLGA)-D-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) nanoparticles (NPs) (shortly PTX-loaded CA-PLGA-TPGS NPs) was fabricated by a modified method of nanoprecipitation. The particle size, zeta potential, morphology, drug release profile, drug encapsulation efficiency, and loading content of PTX-loaded NPs were detected. As shown by confocal laser scanning, NPs loaded with coumarin-6 were internalized by human melanoma cell line A875. The cellular uptake efficiency of CA-PLGA-TPGS NPs was higher than those of PLGA NPs and PLGA-TPGS NPs. The antitumor effects of PTX-loaded NPs were evaluated by the MTT assay in vitro and by a xenograft tumor model in vivo, demonstrating that star-shaped PTX-loaded CA-PLGA-TPGS NPs were significantly superior to commercial PTX formulation Taxol®. Such drug delivery nanocarriers are potentially applicable to the improvement of clinical MM therapy. PMID:28293102

  7. Enhanced in vitro antiproliferative effects of EpCAM antibody-functionalized paclitaxel-loaded PLGA nanoparticles in retinoblastoma cells

    Science.gov (United States)

    Mitra, Moutushy; Misra, Ranjita; Harilal, Anju; Sahoo, Sanjeeb K

    2011-01-01

    Background To specifically deliver paclitaxel (PTX) to retinoblastoma (RB) cells, the anionic surface-charged poly(lactic-co-glycolic acid) (PLGA) NPs loaded with paclitaxel were conjugated with epithelial cell adhesion molecule (EpCAM) antibody for enhancing site-specific intracellular delivery of paclitaxel against EpCAM overexpressing RB cells. Methods PTX-loaded PLGA NPs were prepared by the oil-in-water single emulsion solvent evaporation method, and the PTX content in NPs was estimated by the reverse phase isocratic mode of high performance liquid chromatography. Ethyl-3-[3-dimethylaminopropyl] carbodiimide hydrochloride/N-hydroxysuccinimide chemistry was employed for the covalent attachment of monoclonal EpCAM antibody onto the NP surface. In vitro cytotoxicity of native PTX, unconjugated PTX-loaded NPs (PTX-NPs), and EpCAM antibody-conjugated PTX-loaded nanoparticles (PTX-NP-EpCAM) were evaluated on a Y79 RB cell line by a dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay, while cellular apoptosis, cysteinyl-aspartic acid protease (caspase)-3 activation, Poly (adenosine diphosphate-ribose) polymerase (PARP) cleavage, and cell-cycle arrest were quantified by flow cytometry. By employing flow cytometry and fluorescence image analyses, the extent of cellular uptake was comparatively evaluated. Results PTX-NP-EpCAM had superior antiproliferation activity, increased arrested cell population at the G2-M phase, and increased activation of caspase-3, followed by PARP cleavage in parallel with the induction of apoptosis. Increased uptake of PTX-Np-EpCAM by the cells suggests that they were mainly taken up through EpCAM mediated endocytosis. Conclusions EpCAM antibody-functionalized biodegradable NPs for tumor-selective drug delivery and overcoming drug resistance could be an efficient therapeutic strategy for retinoblastoma treatment. PMID:22065926

  8. Paclitaxel loading in PLGA nanospheres affected the in vitro drug cell accumulation and antiproliferative activity

    Directory of Open Access Journals (Sweden)

    De Maria Ruggero

    2008-07-01

    Full Text Available Abstract Background PTX is one of the most widely used drug in oncology due to its high efficacy against solid tumors and several hematological cancers. PTX is administered in a formulation containing 1:1 Cremophor® EL (polyethoxylated castor oil and ethanol, often responsible for toxic effects. Its encapsulation in colloidal delivery systems would gain an improved targeting to cancer cells, reducing the dose and frequency of administration. Methods In this paper PTX was loaded in PLGA NS. The activity of PTX-NS was assessed in vitro against thyroid, breast and bladder cancer cell lines in cultures. Cell growth was evaluated by MTS assay, intracellular NS uptake was performed using coumarin-6 labelled NS and the amount of intracellular PTX was measured by HPLC. Results NS loaded with 3% PTX (w/w had a mean size Conclusion These findings suggest that the greater biological effect of PTX-NS could be due to higher uptake of the drug inside the cells as shown by intracellular NS uptake and cell accumulation studies.

  9. The Protective Effect against Extracellular Histones Afforded by Long-Pentraxin PTX3 as a Regulator of NETs

    Science.gov (United States)

    Daigo, Kenji; Takamatsu, Yuichiro; Hamakubo, Takao

    2016-01-01

    Pentraxin 3 (PTX3) is a soluble pattern recognition molecule that plays critical roles in innate immunity. Its fundamental functions include recognition of microbes, activation of complement cascades, and opsonization. The findings that PTX3 is one of the component proteins in neutrophil extracellular traps (NETs) and binds with other NET proteins imply the importance of PTX3 in the NET-mediated trapping and killing of bacteria. As NETs play certain critically important host-protective roles, aberrant NET production results in tissue damage. Extracellular histones, the main source of which is considered to be NETs, are mediators of septic death due to their cytotoxicity toward endothelial cells. PTX3 protects against extracellular histones-mediated cytotoxicity through coaggregation. In addition to the anti-bacterial roles performed in coordination with other NET proteins, PTX3 appears to mitigate the detrimental effect of over-activated NETs. A better understanding of the role of the PTX3 complexes in NETs would be expected to lead to new strategies for maintaining a healthy balance between the helpful bactericidal and undesirable detrimental activities of NETs. PMID:27656184

  10. Surface modification of paclitaxel-loaded tri-block copolymer PLGA-b-PEG-b-PLGA nanoparticles with protamine for liver cancer therapy

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Nansha [Chinese Academy of Science, Research Center for Human Tissues and Organs Degeneration, Shenzhen Institute of Advanced Technology (China); Chen, Zhihong [Guangdong Medical College, Analysis Centre (China); Xiao, Xiaojun [Shenzhen University, Institute of Allergy and Immunology, School of Medicine (China); Ruan, Changshun [Chinese Academy of Science, Research Center for Human Tissues and Organs Degeneration, Shenzhen Institute of Advanced Technology (China); Mei, Lin [Tsinghua University, The Shenzhen Key Lab of Gene and Antibody Therapy, and Division of Life and Health Sciences, Graduate School at Shenzhen (China); Liu, Zhigang, E-mail: lzg@szu.edu.cn [Shenzhen University, Institute of Allergy and Immunology, School of Medicine (China); Zeng, Xiaowei, E-mail: zeng.xiaowei@sz.tsinghua.edu.cn [Tsinghua University, The Shenzhen Key Lab of Gene and Antibody Therapy, and Division of Life and Health Sciences, Graduate School at Shenzhen (China)

    2015-08-15

    In order to enhance the therapeutic effect of chemotherapy on liver cancer, a biodegradable formulation of protamine-modified paclitaxel-loaded poly(lactide-co-glycolide)-b-poly(ethylene glycol)-b-poly(lactide-co-glycolide) (PLGA-b-PEG-b-PLGA) nanoparticles (PTX-loaded/protamine NPs) was prepared. Tri-block copolymer PLGA-b-PEG-b-PLGA was synthesized by ring-opening polymerization and characterized by {sup 1}H NMR spectroscopy and gel permeation chromatography. PTX-loaded and PTX-loaded/protamine NPs were characterized in terms of size, size distribution, zeta potential, surface morphology, drug encapsulation efficiency, and drug release. Confocal laser scanning microscopy showed that coumarin 6-loaded/protamine NPs were internalized by hepatocellular carcinoma cell line HepG2. The cellular uptake efficiency of NPs was obviously elevated after protamine modification. With commercial formulation Taxol{sup ®} as the reference, HepG2 cells were also used to study the cytotoxicity of the NPs. PTX-loaded/protamine NPs exhibited significantly higher cytotoxicity than PTX-loaded NPs and Taxol{sup ®} did. All the results suggested that surface modification of PTX-loaded PLGA-b-PEG-b-PLGA NPs with protamine boosted the therapeutic efficacy on liver cancer.

  11. Surface modification of paclitaxel-loaded tri-block copolymer PLGA- b-PEG- b-PLGA nanoparticles with protamine for liver cancer therapy

    Science.gov (United States)

    Gao, Nansha; Chen, Zhihong; Xiao, Xiaojun; Ruan, Changshun; Mei, Lin; Liu, Zhigang; Zeng, Xiaowei

    2015-08-01

    In order to enhance the therapeutic effect of chemotherapy on liver cancer, a biodegradable formulation of protamine-modified paclitaxel-loaded poly(lactide- co-glycolide)- b-poly(ethylene glycol)- b-poly(lactide- co-glycolide) (PLGA- b-PEG- b-PLGA) nanoparticles (PTX-loaded/protamine NPs) was prepared. Tri-block copolymer PLGA- b-PEG- b-PLGA was synthesized by ring-opening polymerization and characterized by 1H NMR spectroscopy and gel permeation chromatography. PTX-loaded and PTX-loaded/protamine NPs were characterized in terms of size, size distribution, zeta potential, surface morphology, drug encapsulation efficiency, and drug release. Confocal laser scanning microscopy showed that coumarin 6-loaded/protamine NPs were internalized by hepatocellular carcinoma cell line HepG2. The cellular uptake efficiency of NPs was obviously elevated after protamine modification. With commercial formulation Taxol® as the reference, HepG2 cells were also used to study the cytotoxicity of the NPs. PTX-loaded/protamine NPs exhibited significantly higher cytotoxicity than PTX-loaded NPs and Taxol® did. All the results suggested that surface modification of PTX-loaded PLGA- b-PEG- b-PLGA NPs with protamine boosted the therapeutic efficacy on liver cancer.

  12. Development of drug-loaded chitosan hollow nanoparticles for delivery of paclitaxel to human lung cancer A549 cells.

    Science.gov (United States)

    Jiang, Jie; Liu, Ying; Wu, Chao; Qiu, Yang; Xu, Xiaoyan; Lv, Huiling; Bai, Andi; Liu, Xuan

    2017-08-01

    In this study, biodegradable chitosan hollow nanospheres (CHN) were fabricated using polystyrene nanospheres (PS) as templates. CHN were applied to increase the solubility of poorly water-soluble drugs. The lung cancer drug paclitaxel (PTX), which is used as a model drug, was loaded into CHN by the adsorption equilibrium method. The drug-loaded sample (PTX-CHN) offered sustained PTX release and good bioavailability. The state characterization of PTX by differential scanning calorimetry (DSC), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) showed that the PTX absorbed into CHN existed in an amorphous state. An in vitro toxicity experiment indicated that CHN were nontoxic as carriers of poorly water-soluble drugs. The PTX-CHN produced a marked inhibition of lung cancer A549 cells proliferation and encouraged apoptosis. A cell uptake experiment indicated that PTX-CHN was successfully taken up by lung cancer A549 cells. Furthermore, a degradation experiment revealed that CHN were readily biodegradable. These findings state clearly that CHN can be regarded as promising biomaterials for lung cancer treatment.

  13. Aberrant methylation of the 3q25 tumor suppressor gene PTX3 in human esophageal squamous cell carcinoma

    Institute of Scientific and Technical Information of China (English)

    Jun-Xiong Wang; Yuan-Long He; Sheng-Tao Zhu; Shuo Yang; Shu-Tian Zhang

    2011-01-01

    AIM: To identify the novel methylation-silenced gene pentraxin 3 (PTX3) in esophageal squamous cell carcinoma (ESCC). METHODS: PTX3 mRNA expression was examined in six human ESCC cell lines, one human immortalized normal esophageal epithelial cell line, primary ESCC tumor tissue, and paired adjacent nontumor tissue using reverse transcription polymerase chain reaction (RT-PCR). Semi-quantitative immunohistochemistry was used to examine cellular localisation and protein levels. Methylation specific PCR and bisulphite genomic sequencing were employed to investigate the methylation of the candidate gene. RESULTS: In the majority of ESCC cell lines, we found that PTX3 expression was down-regulated due to gene promoter hypermethylation, which was further confirmed by bisulphite genomic sequencing. Demethyl-ation treatment with 5-aza-2'-deoxycytidine restored PTX3 mRNA expression in ESCC cell lines. Methylation was more common in tumor tissues (85%) than in adjacent nontumor tissues (25%) (P < 0 .01). CONCLUSION: PTX3 is down-regulated through promoter hypermethylation in ESCC, and could potentially serve as a biomarker of ESCC.

  14. Development of paclitaxel-loaded liposomal nanocarrier stabilized by triglyceride incorporation

    Directory of Open Access Journals (Sweden)

    Hong SS

    2016-09-01

    Full Text Available Soon-Seok Hong,1 Ju Yeon Choi,2 Jong Oh Kim,2 Mi-Kyung Lee,3 So Hee Kim,4 Soo-Jeong Lim1 1Department of Bioscience and Bioengineering, Sejong University, Seoul, 2College of Pharmacy, Yeungnam University, Gyeongsan, 3College of Pharmacy, Woosuk University, Wanju-gun, Jeollabuk-do, 4College of Pharmacy and Research Institute of Pharmaceutical Science and Technology, Ajou University, Suwon, Republic of Korea Abstract: Studies have highlighted the challenge of developing injectable liposomes as a paclitaxel (PTX carrier, a challenge attributable to the limitations in liposomal stability caused by PTX loading. Poor stability of PTX-loaded liposomes is caused by PTX-triggered aggregation or fusion of liposomal membranes and is exacerbated in the presence of PEGylated lipid. In the present study, the effect of triglyceride incorporation on the stability of PTX-loaded/PEGylated liposomes was explored. Incorporation of a medium chain triglyceride Captex 300 into saturated phosphatidylcholine (PC-based liposomes (1,2-dimyristoyl-sn-glycero-3-phosphocholine [DMPC]:cholesterol [CHOL]:N-(Carbonyl-methoxypolyethyleneglycol 2000-1, 2-distearoyl-sn-glycero-3-phospho-ethanolamine [PE-PEG], produced a fine, homogeneous, and membrane-filterable PTX-loaded liposomes fulfilling the requirement of an injectable lipid formulation. Triglyceride incorporation also greatly inhibited the time-dependent leakage of PTX from saturated PC-based liposomes, which appears to be mediated by the inhibition of liposome fusion. In contrast, triglyceride incorporation induced the destabilization and PTX leakage of unsaturated PC-based liposomes, indicating the opposite effect of triglyceride depending on the fluidity status of PC constituting the liposomal membrane. PTX release profile and the in vitro and in vivo anticancer efficacy of triglyceride-incorporated DMPC:CHOL:PE-PEG liposomes were similar to Taxol® while the toxicity of liposomal PTX was significantly lower than that of

  15. A novel paclitaxel-loaded poly(d,l-lactide-co-glycolide)-Tween 80 copolymer nanoparticle overcoming multidrug resistance for lung cancer treatment.

    Science.gov (United States)

    Yuan, Xun; Ji, Wenxiang; Chen, Si; Bao, Yuling; Tan, Songwei; Lu, Shun; Wu, Kongming; Chu, Qian

    2016-01-01

    Drug resistance has become a main obstacle for the effective treatment of lung cancer. To address this problem, a novel biocompatible nanoscale package, poly(d,l-lactide-co-glycolide)-Tween 80, was designed and synthesized to overcome paclitaxel (PTX) resistance in a PTX-resistant human lung cancer cell line. The poly(d,l-lactide-co-glycolide) (PLGA)-Tween 80 nanoparticles (NPs) could efficiently load PTX and release the drug gradually. There was an increased level of uptake of PLGA-Tween 80 in PTX-resistant lung cancer cell line A549/T, which achieved a significantly higher level of cytotoxicity than both PLGA NP formulation and Taxol(®). The in vivo antitumor efficacy also showed that PLGA-Tween 80 NP was more effective than Taxol(®), indicating that PLGA-Tween 80 copolymer was a promising carrier for PTX in resistant lung cancer.

  16. Magnetic and Langmuir Probe Measurements on the Plasmoid Thruster Experiment (PTX)

    Science.gov (United States)

    Koelfgen, Syri J.; Eskridge, Richard; Lee, Michael H.; Martin, Adam; Hawk, Clark W.; Fimognan, Peter

    2004-01-01

    The Plasmoid Thruster Experiment (PTX) operates by inductively producing plasmoids in a conical theta-pinch coil and ejecting them at high velocity. A plasmoid is a plasma with an imbedded closed magnetic field structure. The shape and magnetic field structure of the translating plasmoids have been measured with of an array of magnetic field probes. Six sets of two B-dot probes were constructed for measuring B(sub z) and B(sub theta), the axial and azimuthal components of the magnetic field. The probes are wound on a square G10 form, and have an average (calibrated) NA of 9.37 x l0(exp -5) square meters, where N is the number of turns and A is the cross-sectional area. The probes were calibrated with a Helmholtz coil, driven by a high-voltage pulser to measure NA, and by a signal generator to determine the probe's frequency response. The plasmoid electron number density n(sub e) electron temperature T(sub e), and velocity ratio v/c(sub m), (where v is the bulk plasma flow velocity and c(sub m), is the ion thermal speed) have also been measured with a quadruple Langmuir probe. The Langmuir probe tips are 10 mm long, 20-mil diameter stainless steel wire, housed in a 6-inch long 4-bore aluminum rod. Measurements on PTX with argon and hydrogen from the magnetic field probes and quadruple Langmuir probe will be presented in this paper.

  17. Synthesis, characterization, and evaluation of paclitaxel loaded in six-arm star-shaped poly(lactic-co-glycolic acid)

    Science.gov (United States)

    Chen, Yongxia; Yang, Ziying; Liu, Chao; Wang, Cuiwei; Zhao, Shunxin; Yang, Jing; Sun, Hongfan; Zhang, Zhengpu; Kong, Deling; Song, Cunxian

    2013-01-01

    Background Star-shaped polymers provide more terminal groups, and are promising for application in drug-delivery systems. Methods A new series of six-arm star-shaped poly(lactic-co-glycolic acid) (6-s-PLGA) was synthesized by ring-opening polymerization. The structure and properties of the 6-s-PLGA were characterized by carbon-13 nuclear magnetic resonance spectroscopy, infrared spectroscopy, gel permeation chromatography, and differential scanning calorimetry. Then, paclitaxel-loaded six-arm star-shaped poly(lactic-co-glycolic acid) nanoparticles (6-s-PLGA-PTX-NPs) were prepared under the conditions optimized by the orthogonal testing. High-performance liquid chromatography was used to analyze the nanoparticles’ encapsulation efficiency and drug-loading capacity, dynamic light scattering was used to determine their size and size distribution, and transmission electron microscopy was used to evaluate their morphology. The release performance of the 6-s-PLGA-PTX-NPs in vitro and the cytostatic effect of 6-s-PLGA-PTX-NPs were investigated in comparison with paclitaxel-loaded linear poly(lactic-co-glycolic acid) nanoparticles (L-PLGA-PTX-NPs). Results The results of carbon-13 nuclear magnetic resonance spectroscopy and infrared spectroscopy suggest that the polymerization was successfully initiated by inositol and confirm the structure of 6-s-PLGA. The molecular weights of a series of 6-s-PLGAs had a ratio corresponding to the molar ratio of raw materials to initiator. Differential scanning calorimetry revealed that the 6-s-PLGA had a low glass transition temperature of 40°C–50°C. The 6-s-PLGA-PTX-NPs were monodispersed with an average diameter of 240.4±6.9 nm in water, which was further confirmed by transmission electron microscopy. The encapsulation efficiency of the 6-s-PLGA-PTX-NPs was higher than that of the L-PLGA-PTX-NPs. In terms of the in vitro release of nanoparticles, paclitaxel (PTX) was released more slowly and more steadily from 6-s-PLGA than from

  18. Lipid-albumin nanoassemblies co-loaded with borneol and paclitaxel for intracellular drug delivery to C6 glioma cells with P-gp inhibition and its tumor targeting

    Directory of Open Access Journals (Sweden)

    Bo Tang

    2015-10-01

    Full Text Available Successful chemotherapy with paclitaxel (PTX is impeded by multidrug resistance (MDR in tumor cells. In this study, lipid-albumin nanoassemblies co-loaded with borneol and paclitaxel (BOR/PTX LANs were prepared to circumvent MDR in C6 glioma cells. The physiochemical properties including particle size, encapsulation efficiency and morphology were evaluated in vitro. Quantitative and qualitative investigations of cellular uptake were carried out in C6 glioma cells. The cytotoxicity of the BOR/PTX LANs was determined by MTT assay. After that, the tumor targeting was also evaluated in C6 glioma bearing mice by in vivo imaging analysis. BOR/PTX LANs have a higher entrapment efficiency (90.4 ± 1.2%, small particle size (107.5 ± 3.2 nm, narrow distribution (P.I. = 0.171 ± 0.02. The cellular uptake of PTX was significantly increased by BOR/PTX LANs compared with paclitaxel loaded lipid-albumin nanoassemblies (PTX LANs in quantitative research. The result was further confirmed by confocal laser scanning microscopy qualitatively. The cellular uptake was energy-, time- and concentration-dependent, and clathrin- and endosome/lysosome-associated pathways were involved. The BOR/PTX LANs displayed a higher cytotoxicity agaist C6 glioma cells in comparion with PTX LANs and Taxol. Moreover, the encapsulation of BOR in LANs obviously increased the accumulation of the drug in tumor tissues, demonstrating the tumor targeted ability of BOR/PTX LANs. These results indicated that BOR/PTX LANs could overcome MDR by combination of drug delivery systems and P-gp inhibition, and shown the potential for treatment of gliomas.

  19. The long pentraxin PTX3 as a prototypic humoral pattern recognition receptor: interplay with cellular innate immunity.

    Science.gov (United States)

    Bottazzi, Barbara; Garlanda, Cecilia; Cotena, Alessia; Moalli, Federica; Jaillon, Sebastien; Deban, Livija; Mantovani, Alberto

    2009-01-01

    The innate immune system consists of a cellular arm and a humoral arm. Components of humoral immunity include diverse molecular families, which represent functional ancestors of antibodies. They play a key role as effectors and modulators of innate resistance in animals and humans, interacting with cellular innate immunity. The prototypic long pentraxin, pentraxin 3 (PTX3), represents a case in point of this interplay. Gene targeting of this evolutionarily conserved long pentraxin has unequivocally defined its role at the crossroads of innate immunity, inflammation, matrix deposition, and female fertility. Phagocytes represent a key source of this fluid-phase pattern recognition receptor, which, in turn, facilitates microbial recognition by phagocytes acting as an opsonin. Moreover, PTX3 has modulatory functions on innate immunity and inflammation. Here, we review the studies on PTX3 which emphasize the complexity and complementarity of the crosstalk between the cellular and humoral arms of innate immunity.

  20. Enhanced antitumor efficacy by d-glucosamine-functionalized and paclitaxel-loaded poly(ethylene glycol)-co-poly(trimethylene carbonate) polymer nanoparticles.

    Science.gov (United States)

    Jiang, Xinyi; Xin, Hongliang; Gu, Jijin; Du, Fengyi; Feng, Chunlai; Xie, Yike; Fang, Xiaoling

    2014-05-01

    The poor selectivity of chemotherapeutics for cancer treatment may lead to dose-limiting side effects that compromise clinical outcomes. To solve the problem, surface-functionalized polymer nanoparticles are regarded as promising tumor-targeting delivery system. On the basis of glucose transporter (GLUT) overexpression on cancer cells, d-glucosamine-conjugated and paclitaxel-loaded poly(ethylene glycol)-co-poly(trimethylene carbonate) copolymer nanoparticles (DGlu-NP/PTX) were developed as potential tumor-targeting drug delivery system in this study. Because of the high affinity between d-glucosamine and GLUT, DGlu-NP/PTX could target to tumor tissue through GLUT-mediated endocytosis to improve the selectivity of PTX. DGlu-NP/PTX was prepared by emulsion/solvent evaporation technique and characterized in terms of morphology, size, and zeta potential. In vitro evaluation of two-dimensional cells and three-dimensional tumor spheroids revealed that DGlu-NP/PTX was more potent than those of plain nanoparticles (NP/PTX) and Taxol. In vivo multispectral fluorescent imaging indicated that DGlu-NP had higher specificity and efficiency on subcutaneous xenografts tumor of mouse. Furthermore, DGlu-NP/PTX showed the greatest tumor growth inhibitory effect on in vivo subcutaneous xenografts model with no evident toxicity. Therefore, these results demonstrated that DGlu-NP/PTX could be used as potential vehicle for cancer treatment.

  1. Antitumor effect of iRGD-modified liposomes containing conjugated linoleic acid–paclitaxel (CLA-PTX on B16-F10 melanoma

    Directory of Open Access Journals (Sweden)

    Du R

    2014-06-01

    Full Text Available Ruo Du,1 Ting Zhong,1 Wei-Qiang Zhang,1 Ping Song,1 Wen-Ding Song,1 Yang Zhao,1 Chao-Wang,1 Yi-Qun Tang,3 Xuan Zhang,1,2 Qiang Zhang1,2 1Department of Pharmaceutics, 2State Key Laboratory of Natural and Biomimetic Drugs, School of Pharmaceutical Sciences, Peking University, Beijing, 3Department of Clinical Pharmacy, China Pharmaceutical University, Nanjing, People’s Republic of China Abstract: In the present study, we prepared a novel delivery system of iRGD (CRGDK/RGPD/EC-modified sterically stabilized liposomes (SSLs containing conjugated linoleic acid–paclitaxel (CLA-PTX. The anti-tumor effect of iRGD-SSL-CLA-PTX was investigated on B16-F10 melanoma in vitro and in vivo. The in vitro targeting effect of iRGD-modified SSLs was investigated in a real-time confocal microscopic analysis experiment. An endocytosis-inhibition assay was used to evaluate the endocytosis pathways of the iRGD-modified SSLs. In addition, the in vitro cellular uptake and in vitro cytotoxicity of iRGD-SSL-CLA-PTX were evaluated in B16-F10 melanoma cells. In vivo biodistribution and in vivo antitumor effects of iRGD-SSL-CLA-PTX were investigated in B16-F10 tumor-bearing mice. The induction of apoptosis by iRGD-SSL-CLA-PTX was evaluated in tumor-tissue sections. Real-time confocal microscopic analysis results indicated that the iRGD-modified SSLs internalized into B16-F10 cells faster than SSLs. The identified endocytosis pathway of iRGD-modified SSLs indicated that energy- and lipid raft-mediated endocytosis played a key role in the liposomes’ cellular uptake. The results of the cellular uptake experiment indicated that the increased cellular uptake of CLA-PTX in the iRGD-SSL-CLA-PTX-treated group was 1.9-, 2.4-, or 2.1-fold compared with that in the CLA-PTX group after a 2-, 4-, or 6-hour incubation, respectively. In the biodistribution test, the CLA-PTX level in tumor tissues from iRGD-SSL-CLA-PTX-treated mice at 1 hour (1.84±0.17 µg/g and 4 hours (1.17±0

  2. Antitumor effect of iRGD-modified liposomes containing conjugated linoleic acid-paclitaxel (CLA-PTX) on B16-F10 melanoma.

    Science.gov (United States)

    Du, Ruo; Zhong, Ting; Zhang, Wei-Qiang; Song, Ping; Song, Wen-Ding; Zhao, Yang; Wang, Chao; Tang, Yi-Qun; Zhang, Xuan; Zhang, Qiang

    2014-01-01

    In the present study, we prepared a novel delivery system of iRGD (CRGDK/RGPD/EC)-modified sterically stabilized liposomes (SSLs) containing conjugated linoleic acid-paclitaxel (CLA-PTX). The anti-tumor effect of iRGD-SSL-CLA-PTX was investigated on B16-F10 melanoma in vitro and in vivo. The in vitro targeting effect of iRGD-modified SSLs was investigated in a real-time confocal microscopic analysis experiment. An endocytosis-inhibition assay was used to evaluate the endocytosis pathways of the iRGD-modified SSLs. In addition, the in vitro cellular uptake and in vitro cytotoxicity of iRGD-SSL-CLA-PTX were evaluated in B16-F10 melanoma cells. In vivo biodistribution and in vivo antitumor effects of iRGD-SSL-CLA-PTX were investigated in B16-F10 tumor-bearing mice. The induction of apoptosis by iRGD-SSL-CLA-PTX was evaluated in tumor-tissue sections. Real-time confocal microscopic analysis results indicated that the iRGD-modified SSLs internalized into B16-F10 cells faster than SSLs. The identified endocytosis pathway of iRGD-modified SSLs indicated that energy- and lipid raft-mediated endocytosis played a key role in the liposomes' cellular uptake. The results of the cellular uptake experiment indicated that the increased cellular uptake of CLA-PTX in the iRGD-SSL-CLA-PTX-treated group was 1.9-, 2.4-, or 2.1-fold compared with that in the CLA-PTX group after a 2-, 4-, or 6-hour incubation, respectively. In the biodistribution test, the CLA-PTX level in tumor tissues from iRGD-SSL-CLA-PTX-treated mice at 1 hour (1.84±0.17 μg/g) and 4 hours (1.17±0.28 μg/g) was 2.3- and 2.0-fold higher than that of CLA-PTX solution at 1 hour (0.79±0.06 μg/g) and 4 hours (0.58±0.04 μg/g). The value of the area under the curve for the first 24 hours in the tumors of iRGD-SSL-CLA-PTX-treated mice was significantly higher than that in the SSL-CLA-PTX and CLA-PTX solution-treated groups (P<0.01). The in vivo antitumor results indicated that iRGD-SSL-CLA-PTX significantly inhibited

  3. Antitumor effect of iRGD-modified liposomes containing conjugated linoleic acid–paclitaxel (CLA-PTX) on B16-F10 melanoma

    Science.gov (United States)

    Du, Ruo; Zhong, Ting; Zhang, Wei-Qiang; Song, Ping; Song, Wen-Ding; Zhao, Yang; Wang, Chao; Tang, Yi-Qun; Zhang, Xuan; Zhang, Qiang

    2014-01-01

    In the present study, we prepared a novel delivery system of iRGD (CRGDK/RGPD/EC)-modified sterically stabilized liposomes (SSLs) containing conjugated linoleic acid–paclitaxel (CLA-PTX). The anti-tumor effect of iRGD-SSL-CLA-PTX was investigated on B16-F10 melanoma in vitro and in vivo. The in vitro targeting effect of iRGD-modified SSLs was investigated in a real-time confocal microscopic analysis experiment. An endocytosis-inhibition assay was used to evaluate the endocytosis pathways of the iRGD-modified SSLs. In addition, the in vitro cellular uptake and in vitro cytotoxicity of iRGD-SSL-CLA-PTX were evaluated in B16-F10 melanoma cells. In vivo biodistribution and in vivo antitumor effects of iRGD-SSL-CLA-PTX were investigated in B16-F10 tumor-bearing mice. The induction of apoptosis by iRGD-SSL-CLA-PTX was evaluated in tumor-tissue sections. Real-time confocal microscopic analysis results indicated that the iRGD-modified SSLs internalized into B16-F10 cells faster than SSLs. The identified endocytosis pathway of iRGD-modified SSLs indicated that energy- and lipid raft-mediated endocytosis played a key role in the liposomes’ cellular uptake. The results of the cellular uptake experiment indicated that the increased cellular uptake of CLA-PTX in the iRGD-SSL-CLA-PTX-treated group was 1.9-, 2.4-, or 2.1-fold compared with that in the CLA-PTX group after a 2-, 4-, or 6-hour incubation, respectively. In the biodistribution test, the CLA-PTX level in tumor tissues from iRGD-SSL-CLA-PTX-treated mice at 1 hour (1.84±0.17 μg/g) and 4 hours (1.17±0.28 μg/g) was 2.3- and 2.0-fold higher than that of CLA-PTX solution at 1 hour (0.79±0.06 μg/g) and 4 hours (0.58±0.04 μg/g). The value of the area under the curve for the first 24 hours in the tumors of iRGD-SSL-CLA-PTX-treated mice was significantly higher than that in the SSL-CLA-PTX and CLA-PTX solution-treated groups (P<0.01). The in vivo antitumor results indicated that iRGD-SSL-CLA-PTX significantly

  4. High plasma level of long pentraxin 3 (PTX3 is associated with fatal disease in bacteremic patients: a prospective cohort study.

    Directory of Open Access Journals (Sweden)

    Reetta Huttunen

    Full Text Available INTRODUCTION: Long pentraxin 3 (PTX3 is an acute-phase protein secreted by various cells, including leukocytes and endothelial cells. Like C-reactive protein (CRP, it belongs to the pentraxin superfamily. Recent studies indicate that high levels of PTX3 may be associated with mortality in sepsis. The prognostic value of plasma PTX3 in bacteremic patients is unknown. METHODS: Plasma PTX3 levels were measured in 132 patients with bacteremia caused by Staphylococcus aureus, Streptococcus pneumoniae, β-hemolytic streptococcae and Escherichia coli, using a commercial solid-phase enzyme-linked immunosorbent assay (ELISA. Values were measured on days 1-4 after positive blood culture, on day 13-18 and on recovery. RESULTS: The maximum PTX3 values on days 1-4 were markedly higher in nonsurvivors compared to survivors (44.8 vs 6.4 ng/ml, p15 ng/ml was associated with hypotension (MAP 15 ng/ml remained an independent risk factor for case fatality in a logistic regression model adjusted for potential confounders. CONCLUSIONS: PTX3 proved to be a specific independent prognostic biomarker in bacteremia. PTX3 during the first days after diagnosis showed better prognostic value as compared to CRP, a widely used biomarker in clinical settings. PTX3 measurement offers a novel opportunity for the prognostic stratification of bacteremia patients.

  5. The synergic antitumor effects of paclitaxel and temozolomide co-loaded in mPEG-PLGA nanoparticles on glioblastoma cells

    Science.gov (United States)

    Li, Yiming; Sun, Ying; Teng, Yanwei; Wang, Yi; Duan, Yourong

    2016-01-01

    To get better chemotherapy efficacy, the optimal synergic effect of Paclitaxel (PTX) and Temozolomide (TMZ) on glioblastoma cells lines was investigated. A dual drug-loaded delivery system based on mPEG-PLGA nanoparticles (NPs) was developed to potentiate chemotherapy efficacy for glioblastoma. PTX/TMZ-NPs were prepared with double emulsification solvent evaporation method and exhibited a relatively uniform diameter of 206.3 ± 14.7 nm. The NPs showed sustained release character. Cytotoxicity assays showed the best synergistic effects were achieved when the weight ratios of PTX to TMZ were 1:5 and 1:100 on U87 and C6 cells, respectively. PTX/TMZ-NPs showed better inhibition effect to U87 and C6 cells than single drug NPs or free drugs mixture. PTX/TMZ-NPs (PTX: TMZ was 1:5(w/w)) significantly inhibited the tumor growth in the subcutaneous U87 mice model. These results indicate that coordinate administration of PTX and TMZ combined with NPs is an efficient method for glioblastoma. PMID:26956046

  6. Heterocomplexes of mannose-binding lectin and the pentraxins PTX3 or SAP trigger cross-activation of the complement system

    DEFF Research Database (Denmark)

    Ma, Ying Jie; Doni, Andrea; Skjødt, Mikkel-Ole;

    2011-01-01

    The long pentraxin 3 (PTX3), serum amyloid P component (SAP) and C-reactive protein (CRP) belong to the pentraxin family of pattern recognition molecules involved in tissue homeostasis and innate immunity. They interact with C1q from the classical complement pathway. Whether this also occurs via...... the analogous mannose-binding lectin (MBL) from the lectin complement pathway is unknown. Thus, we investigated the possible interaction between MBL and the pentraxins. We report that MBL bound PTX3 and SAP partly via its collagen-like domain, but not CRP. MBL:PTX3 complex formation resulted in recruitment of C......1q, but this was not seen for the MBL:SAP complex. However, both MBL:PTX3 and MBL:SAP complexes enhanced C4 and C3 deposition and opsonophagocytosis of Candida albicans by polymorphonuclear leukocytes. Interaction between MBL and PTX3 lead to communication between the lectin and classical complement...

  7. Ficolin-1-PTX3 complex formation promotes clearance of altered self-cells and modulates IL-8 production

    DEFF Research Database (Denmark)

    Ma, Ying Jie; Doni, Andrea; Romani, Luigina;

    2013-01-01

    The long pentraxin 3 (PTX3) has been shown to be important in maintaining internal tissue homeostasis and in protecting against fungal Aspergillus fumigatus infection. However, the molecular mechanisms of how these functions are elicited are poorly delineated. Ficolin-1 is a soluble pattern recog...

  8. Preparation and Tumor Inhibition Effect of Transferrin Modified Paclitaxel-loaded Liposome%转铁蛋白修饰紫杉醇脂质体的制备及其抑瘤作用

    Institute of Scientific and Technical Information of China (English)

    靳彩玲; 赵树鹏; 张敏; 王颖; 寇小格; 路平

    2016-01-01

    目的:制备转铁蛋白(TF)修饰紫杉醇(PTX)脂质体(TF-PTX-LP),并研究其抑瘤作用.方法:采用薄膜分散法制备TF-PTX-LP并观察其形态;定性和定量考察肝癌HepG2细胞对TF-LP和LP的摄取情况;检测PTX、PTX-LP和TF-PTX-LP分别处理HepG2细胞24、48、72 h后细胞的增殖抑制率;以HepG2细胞制备肿瘤球,考察生理盐水、PTX、PTX-LP和TF-PTX-LP分别处理0、1、2、4、5、6、7 d对肿瘤球体积的影响;复制HepG2荷瘤裸鼠模型,考察生理盐水、PTX、PTX-LP和TF-PTX-LP(以PTX计8.5 mg/kg)对荷瘤裸鼠移植瘤的抑制作用.结果:TF-PTX-LP均呈均一球形,粒径在100~120 nm.TF-LP处理后细胞的荧光强度强于LP(P<0.01).与PTX、PTX-LP比较,TF-PTX-LP处理后细胞的增殖抑制率更高(P<0.01).与生理盐水、PTX、PTX-LP比较, TF-PTX-LP处理后肿瘤球体积更小,对荷瘤裸鼠的抑瘤率更高,且6、7 d后抑瘤率差异有统计学意义(P<0.01).增殖抑制率和肿瘤球体积变化呈时间依赖性.结论:成功制得具有良好抑瘤作用的TF-PTX-LP.%OBJECTIVE:To prepare transferrin modified paclitaxel-loaded liposome(TF-PTX-LP),and to study the tumor in-hibition effect. METHODS:TF-PTX-LP was prepared by thin-film method,and morphology of TF-PTX-LP was observed. Qualita-tive and quantitative investigation were used to value the uptake efficiency of TF-LP and LP by HepG2 cells. The proliferation inhi-bition rate of HepG2 cells was investigated after treated with PTX,PTX-LP and TF-PTX-LP for 24,48 and 72 h. Tumor spheres were prepared by using HepG2 cells. Effects of normal saline,PTX,PTX-LP and TF-PTX-LP on the volume of tumor spheres were investigated after 0,1,2,4,5,6 and 7 d treatment. HepG2 tumor-bearing nude mice model was induced. Inhibitory effects of normal saline,PTX,PTX-LP and TF-PTX-LP(8.5 mg/kg by PTX)on transplantable tumor of tumor-bearing nude mice were in-vestigated. RESULTS:TF-PTX-LP showed uniform spherical shape,with particle size of 100-120 nm. The

  9. The preparation, characterization, and pharmacokinetic studies of chitosan nanoparticles loaded with paclitaxel/dimethyl-β-cyclodextrin inclusion complexes

    Directory of Open Access Journals (Sweden)

    Ye YJ

    2015-07-01

    Full Text Available Ya-Jing Ye,1 Yun Wang,1 Kai-Yan Lou,1 Yan-Zuo Chen,1 Rongjun Chen,2 Feng Gao1,3,4 1Department of Pharmaceutics, School of Pharmacy, East China University of Science and Technology, Shanghai, People’s Republic of China; 2Department of Chemical Engineering, Imperial College London, London, United Kingdom; 3Shanghai Key Laboratory of Functional Materials Chemistry, 4Shanghai Key Laboratory of New Drug Design, East China University of Science and Technology, Shanghai, People’s Republic of China Abstract: A novel biocompatible and biodegradable drug-delivery nanoparticle (NP has been developed to minimize the severe side effects of the poorly water-soluble anticancer drug paclitaxel (PTX for clinical use. PTX was loaded into the hydrophobic cavity of a hydrophilic cyclodextrin derivative, heptakis (2,6-di-O-methyl-β-cyclodextrin (DM-β-CD, using an aqueous solution-stirring method followed by lyophilization. The resulting PTX/DM-β-CD inclusion complex dramatically enhanced the solubility of PTX in water and was directly incorporated into chitosan (CS to form NPs (with a size of 323.9–407.8 nm in diameter using an ionic gelation method. The formed NPs had a zeta potential of +15.9–23.3 mV and showed high colloidal stability. With the same weight ratio of PTX to CS of 0.7, the loading efficiency of the PTX/DM-β-CD inclusion complex-loaded CS NPs was 30.3-fold higher than that of the PTX-loaded CS NPs. Moreover, it is notable that PTX was released from the DM-β-CD/CS NPs in a sustained-release manner. The pharmacokinetic studies revealed that, compared with reference formulation (Taxol®, the PTX/DM-β-CD inclusion complex-loaded CS NPs exhibited a significant increase in AUC0→24h (the area under the plasma drug concentration–time curve over the period of 24 hours and mean residence time by 2.7-fold and 1.4-fold, respectively. Therefore, the novel drug/DM-β-CD inclusion complex-loaded CS NPs have promising applications for the

  10. What makes proteins work: exploring life in P-T-X

    Science.gov (United States)

    Ichiye, Toshiko

    2016-12-01

    Although considerable progress has been made in the molecular biophysics of proteins, it is still not possible to reliably design an enzyme for a given function. The current understanding of enzyme function is that both structure and flexibility are important. Much attention has been focused recently on protein folding and thus structure, spurred on by insights from the folding funnel concept. For experimental studies of protein folding, variations in temperature (T) and chemical composition (X) of the solution have been traditionally exploited, although more recent studies using variations in pressure (P) made possible through new instrumentation have led to a deeper understanding of the energy landscape of protein folding. Other work has shown that flexibility is also essential for enzymes, although it is still not clear what type is important. Another avenue has been to take advantage of ‘Nature’s laboratory’ by exploring homologous proteins from organisms that live in extreme conditions, or ‘extremophiles’. While the most studied extremophiles live at extremes of T and X, recent exploration of deep-sea environments has led to the discovery of organisms living under high P, or ‘piezophiles’. An exploration of targeted enzymes from organisms with various P-T-X growth conditions coupled with advances in biophysical instrumentation and computer simulations that allow studies of these enzymes at different P-T-X conditions may lead to a better understanding of ‘flexibility’ and to general design criteria for active enzymes. Preface. Kamal Shukla’s great contribution to science has been his vision that physical sciences could bring new insights to biological sciences, and that the marriage of methodologies, particularly theoretical/computational with experimental, was needed to tackle the complexities of biology. Furthermore, his openness to new methods and different ideas outside the current fad has helped make his vision a reality. In my remarks

  11. PtxGd alloy formation on Pt(111): Preparation and structural characterization

    Science.gov (United States)

    Ulrikkeholm, Elisabeth T.; Pedersen, Anders F.; Vej-Hansen, Ulrik G.; Escudero-Escribano, Maria; Stephens, Ifan E. L.; Friebel, Daniel; Mehta, Apurva; Schiøtz, Jakob; Feidenhansl', Robert K.; Nilsson, Anders; Chorkendorff, Ib

    2016-10-01

    PtxGd single crystals have been prepared in ultra high vacuum (UHV). This alloy shows promising catalytic properties for the oxygen reduction reaction. The samples were prepared by using vacuum deposition of a thick layer of Gd on a sputter cleaned Pt(111) single crystal, resulting in a ∼63 nm thick alloy layer. Subsequently the surfaces were characterized using X-ray photoelectron spectroscopy (XPS), low energy electron diffraction (LEED), ion scattering spectroscopy (ISS) and temperature programmed desorption (TPD) of CO. A Pt terminated alloy was observed upon annealing the sample to 600 ∘C. The LEED and synchrotron XRD experiments have shown that a slightly compressed (2 × 2) alloy appear. The alloy film followed the orientation of the Pt(111) substrate half the time, otherwise it was rotated by 30∘. The TPD spectra show a well-defined peak shifted down 200 ∘C in temperature. The crystal structure of the alloy was investigated using ex-situ X-ray diffraction experiments, which revealed an in-plane compression and a complicated stacking sequence. The crystallites in the crystal are very small, and a high degree of twinning by merohedry was observed.

  12. IDENTIFIKASI WASTE PADA WHOLE STREAM PERUSAHAAN ROKOK DI PT.X16

    Directory of Open Access Journals (Sweden)

    Rakhmawati Rakhmawati

    2016-11-01

    Full Text Available Identify to be done by using method of lean manufacturing. This research aimed at identify waste and formulate effort reduction of waste production process smoke in PT.X. The data were collected from manufacturer records, study to determine processing time, as well as interview and quisioners which were distributed to workers in each department. Big picture mapping and value stream mapping tools (VALSAT were then utilised to process the data.Result of from research got that during once production process can reduce from 152.59 minute become 149.59 time and minute every order 26 day become 19 day. From result of waste workshop known that type extravagance of cause the happening of production process time depth ( 3 highest is defect, waiting time and excessive transportation, so that appliance (tool matching with the extravagance type is mapping filter quality with successive wight 96,6 : 55,86 : and 23,32.According to the result found also cause of extravagance for example, to the number of time used for the activity of inspection between aktifitas so that cause production process time become Ilama, existence of distance which among tobacco warehouse with process of perajangan resulting the happening of movement of bolak return worker so that add production process time become llama. One of the ways to improve it is by applying pull system (Kanban.

  13. Enhanced in vitro and in vivo therapeutic efficacy of codrug-loaded nanoparticles against liver cancer

    Directory of Open Access Journals (Sweden)

    Li X

    2012-10-01

    Full Text Available Xiaolin Li,1,* Hua’e Xu,2,* Xinzheng Dai,3,4,* Zhenshu Zhu,5 Baorui Liu,6 Xiaowei Lu11Department of Geriatrics, 2Department of Pharmacy, the First Affiliated Hospital to Nanjing Medical University, Nanjing; 3Key Laboratory of Living Donor Liver Transplantation, Ministry of Public Health, 4Liver Transplantation Center, the First Affiliated Hospital to Nanjing Medical University, Nanjing; 5Department of Pharmaceutical Analysis, China Pharmaceutical University, Nanjing; 6The Comprehensive Cancer Center of Drum Tower Hospital, Medical School of Nanjing University and Clinical Cancer Institute of Nanjing University, Nanjing, China*These authors contributed equally to this workAbstract: Paclitaxel (Ptx, one of the most widely used anticancer agents, has demonstrated extraordinary activities against a variety of solid tumors. However, the therapeutic response of Ptx is often associated with severe side effects caused by its nonspecific cytotoxic effects and special solvents (Cremophor EL®. The current study reports the stable controlled release of Ptx/tetrandrine (Tet-coloaded nanoparticles by amphilic methoxy poly(ethylene glycol–poly(caprolactone block copolymers. There were three significant findings. Firstly, Tet could effectively stabilize Ptx-loaded nanoparticles with the coencapsulation of Tet and Ptx. The influence of different Ptx/Tet feeding ratios on the size and loading efficiency of the nanoparticles was also explored. Secondly, the encapsulation of Tet and Ptx into nanoparticles retains the synergistic anticancer efficiency of Tet and Ptx against mice hepatoma H22 cells. Thirdly, in the in vivo evaluation, intratumoral administration was adopted to increase the site-specific delivery. Ptx/Tet nanoparticles, when delivered intratumorally, exhibited significantly improved antitumor efficacy; moreover, they substantially increased the overall survival in an established H22-transplanted mice model. Further investigation into the

  14. 75As NQR and NMR Studies on the Superconducting State of Ca10Pt4As8(Fe1-xPtxAs)10

    Science.gov (United States)

    Kobayashi, Yoshiaki; Iida, Takefumi; Suzuki, Kazunori; Kawamata, Takayuki; Itoh, Masayuki; Sato, Masatoshi

    2014-01-01

    75As NQR and NMR measurements of Ca10Pt4As8(Fe1-xPtxAs)10 with the superconducting transition temperature Tc = 33.4 K have been carried out. The observed 75As NQR spectra can be divided into those from As sites in (Fe1-xPtx)As and PtAs2 layers. From the NQR spectra of 75As in the (Fe1-xPtxAs) layers, x is found to be ~20%, indicating that the superconductivity is robust against nonmagnetic impurities. This contradicts the existence of the sign reversal of the order parameter in the system. The 75As nuclear spin-lattice relaxation rates 1/T1's from the (Fe1-xPtx)As and PtAs2 layers indicate that the PtAs2 layers are in a nonmetallic state and do not contribute to the occurrence of the superconductivity.

  15. Characterization of the paclitaxel loaded chitosan graft Pluronic F127 copolymer micelles conjugate with a DNA aptamer targeting HER-2 overexpressing breast cancer cells

    Science.gov (United States)

    Thach Nguyen, Kim; Nguyen, Thu Ha; Do, Dinh Ho; Huan Le, Quang

    2017-03-01

    In this work we report the isolation of DNA aptamer that is specifically bound to a HER-2 overexpressing SK-BR-3 human breast cancer cell line, using SELEX strategy. Paclitaxel (PTX) loaded chitosan graft Pluronic F127 copolymer micelles conjugate with a DNA aptamer was synthesized and its structure was confirmed by TEM image. This binary mixed system consisting of DNA aptamer modified Pluronic F127 and chitosan could enhance PTX loading capacity and increase micelle stability. Morphology images confirmed the existence of PTX micelles, with an average size of approximately 86.22 ± 1.45 nm diameters. Drug release profile showed that the PTX conjugate maintained a sustained PTX release. From in vitro cell experiment it was shown that 89%–93%, 50%–58%, 55%–62%, 24%–28% and 2%–7% of the SK-BR-3, NS-VN-67, LH-VN-48, HT-VN-26 and NV-VN-31, respectively, were dead after 6–48 h. These results demonstrated a novel DNA aptamer-micelle assembly for efficient detection and a system for the delivery of PTX targeting specific HER-2 overexpressing. We have also successfully cultivated cancer tissues of explants from Vietnamese patients on a type I collagen substrate. The NS-VN-67, LH-VN-48, HT-VN-26 and NV-VN-31cell lines were used as cellular model sources for the study of chemotherapy drug in cancer.

  16. 中国百日咳鲍特菌ptxS1和prn基因多态性分析%Polymorphism of ptxS1 and prn Genes of Bordetella pertussis in China

    Institute of Scientific and Technical Information of China (English)

    张柳; 徐颖华; 赵建宏; 徐运强; 张庶民

    2010-01-01

    目的 分析我国近50年来分离的百日咳鲍特菌抗原百日咳毒素(Pertussis toxin,PT)S1亚基(ptxS1)和百日咳黏附素(Pertactin,prn)基因多态性.方法 收集85株百日咳杆菌,分别进行ptxS1和prn基因的PCR扩增和测序,并对序列进行比较分析.结果 共发现4个ptxS1基因型和6个prn基因型的百日咳杆菌.自20世纪60年代,非疫苗型ptxS1A菌株逐渐取代疫苗型菌株;含有prn2和prn3新基因型的菌株出现在2000年以后.基因的系统进化树显示,菌株ptxS1和prn基因型的核苷酸和氨基酸序列的同源性分别在97%以上.结论 我国近50年流行的百日咳临床分离菌株ptxSl和prn基因存在抗原漂移现象,本研究为加强我国百日咳的流行病学监控与新型无细胞百日咳疫苗的研发奠定了基础.

  17. Ultrasound triggered image-guided drug delivery to inhibit vascular reconstruction via paclitaxel-loaded microbubbles.

    Science.gov (United States)

    Zhu, Xu; Guo, Jun; He, Cancan; Geng, Huaxiao; Yu, Gengsheng; Li, Jinqing; Zheng, Hairong; Ji, Xiaojuan; Yan, Fei

    2016-02-22

    Paclitaxel (PTX) has been recognized as a promising drug for intervention of vascular reconstructions. However, it is still difficult to achieve local drug delivery in a spatio-temporally controllable manner under real-time image guidance. Here, we introduce an ultrasound (US) triggered image-guided drug delivery approach to inhibit vascular reconstruction via paclitaxel (PTX)-loaded microbubbles (PLM) in a rabbit iliac balloon injury model. PLM was prepared through encapsulating PTX in the shell of lipid microbubbles via film hydration and mechanical vibration technique. Our results showed PLM could effectively deliver PTX when exposed to US irradiation and result in significantly lower viability of vascular smooth muscle cells. Ultrasonographic examinations revealed the US signals from PLM in the iliac artery were greatly increased after intravenous administration of PLM, making it possible to identify the restenosis regions of iliac artery. The in vivo anti-restenosis experiments with PLM and US greatly inhibited neointimal hyperplasia at the injured site, showing an increased lumen area and reduced the ratio of intima area and the media area (I/M ratio). No obvious functional damages to liver and kidney were observed for those animals. Our study provided a promising approach to realize US triggered image-guided PTX delivery for therapeutic applications against iliac restenosis.

  18. Improved cytotoxicity of paclitaxel loaded in nanosized lipid carriers by intracellular delivery

    Science.gov (United States)

    Miao, Jing; Du, Yongzhong; Yuan, Hong; Zhang, Xingguo; Li, Qian; Rao, Yuefeng; Zhao, Mengdan; Hu, Fuqiang

    2015-01-01

    Nanosized lipid carriers (NLC) can improve the limited drug-loading (DL) capacity and drug expulsion during storage, and adjust the drug release profile of solid lipid nanoparticles (SLN). In this study, Paclitaxel (PTX)-loaded NLC were prepared by solvent diffusion method using monostearin as solid lipid and oleic acid (OA) as liquid lipid matrix. The blank NLC with different OA content (the size range was from 89.5 ± 7.4 to 160.2 ± 34.6 nm) showed smaller size than the blank SLN (the size was 272.7 ± 43.6 nm), while the PTX-loaded NLC (the size range was from 481.3 ± 29.8 to 561.7 ± 38.3 nm) showed little bigger size, higher DL capacity, and faster drug in vitro release rate comparing with SLN (the size was 437.3 ± 68.2 nm). The 50 % cellular growth inhibitions (IC50) of PTX-loaded NLC with 0, 5, 10, and 20 wt % OA were 0.92 ± 0.06, 0.69 ± 0.04, 0.25 ± 0.02, and 0.12 ± 0.02 µg mL-1, respectively, while the IC50 of TaxolTM was 1.72 ± 0.09 µg mL-1. For analyzing cellular drug effect, cellular uptakes of fluorescent NLC and intracellular drug concentration were investigated. As the incorporation of OA into solid lipid matrix could accelerate both the cellular uptake and the PTX delivery, loaded by NLC, the cytotoxicity of PTX could be enhanced, and further enhanced by increasing OA content in NLC.

  19. Synthesis, characterization, and evaluation of paclitaxel loaded in six-arm star-shaped poly(lactic-co-glycolic acid

    Directory of Open Access Journals (Sweden)

    Chen Y

    2013-11-01

    Full Text Available Yongxia Chen,1,3,* Ziying Yang,1,* Chao Liu,1 Cuiwei Wang,1 Shunxin Zhao,2 Jing Yang,1 Hongfan Sun,1 Zhengpu Zhang,2 Deling Kong,1 Cunxian Song1 1Tianjin Key Laboratory of Biomaterial Research, Institute of Biomedical Engineering, Chinese Academy of Medical Science and Peking Union Medical College, 2Institute of Polymer Chemistry, Nankai University, 3Center for Medical Device Evaluation of Tianjin, Tianjin, People's Republic of China  *These authors contributed equally to this work Background: Star-shaped polymers provide more terminal groups, and are promising for application in drug-delivery systems. Methods: A new series of six-arm star-shaped poly(lactic-co-glycolic acid (6-s-PLGA was synthesized by ring-opening polymerization. The structure and properties of the 6-s-PLGA were characterized by carbon-13 nuclear magnetic resonance spectroscopy, infrared spectroscopy, gel permeation chromatography, and differential scanning calorimetry. Then, paclitaxel-loaded six-arm star-shaped poly(lactic-co-glycolic acid nanoparticles (6-s-PLGA-PTX-NPs were prepared under the conditions optimized by the orthogonal testing. High-performance liquid chromatography was used to analyze the nanoparticles' encapsulation efficiency and drug-loading capacity, dynamic light scattering was used to determine their size and size distribution, and transmission electron microscopy was used to evaluate their morphology. The release performance of the 6-s-PLGA-PTX-NPs in vitro and the cytostatic effect of 6-s-PLGA-PTX-NPs were investigated in comparison with paclitaxel-loaded linear poly(lactic-co-glycolic acid nanoparticles (L-PLGA-PTX-NPs. Results: The results of carbon-13 nuclear magnetic resonance spectroscopy and infrared spectroscopy suggest that the polymerization was successfully initiated by inositol and confirm the structure of 6-s-PLGA. The molecular weights of a series of 6-s-PLGAs had a ratio corresponding to the molar ratio of raw materials to initiator

  20. Mechanism of macrophage injury following traumatic hemorrhagic shock: through PTX-sensitive G-protein-mediated signal transduction pathway

    Institute of Scientific and Technical Information of China (English)

    刘靖华; 刘良明; 陈惠孙; 胡德耀; 刘怀琼

    2002-01-01

    Objective: To study the mechanism of macrophage injury after trauma-hemorrhagic shock.   Methods: Wistar male rats underwent trauma (closed bone fracture) and hemorrhage (mean arterial blood pressure of 35 mm Hg±5 mm Hg for 60 minutes, following fluid resuscitation). Rats without trauma, hemorrhage or fluid resuscitation served as controls. Peritoneal macrophages were harvested at 6 hours and 1, 2, 3, 7 days after traumatic hemorrhagic shock to determine the effects of pertussis toxin (PTX, as a specific inhibitor to Giα) and cholera toxin (CTX, as a stimulant to Gsα) on macrophage-Ia expression and TNF-α production and levels of Giα and Gsα.   Results: The macrophages from the injured rats revealed a significant decrease of Ia positive number and TNF-α release in response to LPS. With pretreatment with PTX 10-100 ng/ml Ia positive cells and LPS-induced TNFα production in both control and impaired macrophages populations were dose-dependently increased. Both macrophages populations were not responding to CTX treatment (10-100 ng/ml). Western blot analyses showed that the levels of Giα protein expression increased as much as 116.5%-148.8% of the control level from 6 hours through 7 days after traumatic hemorrhage. The levels of Gsα protein expression were reduced at 6 hours and decreased to the lowest degree; 36% of the control at day 1, began to return at day 2 and returned to the normal level at day 7, following traumatic hemorrhagic shock.   Conclusions: PTX-sensitive G-protein may participate in the modulation of macrophage-Ia expression and TNF-α release following traumatic hemorrhagic shock. Analyses of the alteration of Giα and Gsα protein expressions further supports the concept that G-protein is involved in trauma-induced macrophage signal transduction pathways.

  1. PENGENDALIAN LANTAI PABRIK DENGAN LOAD ORIENTED MANUFACTURING CONTROL PADA INDUSTRI MEBEL (STUDI KASUS PT “X”

    Directory of Open Access Journals (Sweden)

    Sri Hartini

    2012-02-01

    Full Text Available Load Oriented Manufacturing Control (LOMC is an input-output control system development thatconsidered work load in every work center. Production planning starts with determining production leadtime, then work load control (WLC. WLC consist of defining criteria and determining release procedure tothe shop floor for items that will be processed. This research tried to implement LOMC concept in afurniture company called PT.X. The result of the research showed that LOMC could improve throughputand minimize work in process (WIP.

  2. Ultrasound-Mediated Microbubble Destruction (UMMD) Facilitates the Delivery of CA19-9 Targeted and Paclitaxel Loaded mPEG-PLGA-PLL Nanoparticles in Pancreatic Cancer.

    Science.gov (United States)

    Xing, Lingxi; Shi, Qiusheng; Zheng, Kailiang; Shen, Ming; Ma, Jing; Li, Fan; Liu, Yang; Lin, Lizhou; Tu, Wenzhi; Duan, Yourong; Du, Lianfang

    2016-01-01

    Pancreatic cancer, one of the most lethal human malignancies with dismal prognosis, is refractory to existing radio-chemotherapeutic treatment modalities. There is a critical unmet need to develop effective approaches, especially for targeted pancreatic cancer drug delivery. Targeted and drug-loaded nanoparticles (NPs) combined with ultrasound-mediated microbubble destruction (UMMD) have been shown to significantly increase the cellular uptake in vitro and drug retention in vivo, suggesting a promising strategy for cancer therapy. In this study, we synthesized pancreatic cancer-targeting organic NPs that were modified with anti CA19-9 antibody and encapsulated paclitaxol (PTX). The three-block copolymer methoxy polyethylene glycol-polylacticco-glycolic acid-polylysine (mPEG-PLGA-PLL) constituted the skeleton of the NPs. We speculated that the PTX-NPs-anti CA19-9 would circulate long-term in vivo, "actively target" pancreatic cancer cells, and sustainably release the loaded PTX while UMMD would "passively target" the irradiated tumor and effectively increase the permeability of cell membrane and capillary gaps. Our results demonstrated that the combination of PTX-NPs-anti CA19-9 with UMMD achieved a low IC50, significant cell cycle arrest, and cell apoptosis in vitro. In mouse pancreatic tumor xenografts, the combined application of PTX-NP-anti CA19-9 NPs with UMMD attained the highest tumor inhibition rate, promoted the pharmacokinetic profile by increasing AUC, t1/2, and mean residence time (MRT), and decreased clearance. Consequently, the survival of the tumor-bearing nude mice was prolonged without obvious toxicity. The dynamic change in cellular uptake, targeted real-time imaging, and the concentration of PTX in the plasma and tumor were all closely associated with the treatment efficacy both in vitro and in vivo. Our study suggests that PTX-NP-anti CA19-9 NPs combined with UMMD is a promising strategy for the treatment of pancreatic cancer.

  3. Synchrotron Based Structural Investigations of Mass-Selected PtxGd Nanoparticles and a Gd/Pt(111) Single Crystal for Electrochemical Oxygen Reduction

    DEFF Research Database (Denmark)

    Pedersen, Anders Filsøe; Velazquez-Palenzuela, Amado Andres; Masini, Federico

    2015-01-01

    . 134, 16476–16479 (2012). 3. Velazquez-Palenzuela, A. et al. The enhanced activity of mass-selected PtxGd nanoparticles for oxygen electroreduction. J. Catal. [in press] (2015). doi:10.1016/j.jcat.2014.12.012 4. Perez-Alonso, F. J. et al. The Effect of Size on the Oxygen Electroreduction Activity...

  4. Paclitaxel-loaded poly(lactide-co-glycolide)/poly(ethylene vinyl acetate) composite for stent coating by ultrasonic atomizing spray

    Science.gov (United States)

    Yuk, Soon Hong; Oh, Keun Sang; Park, Jinah; Kim, Soon-Joong; Kim, Jung Ho; Kwon, Il Keun

    2012-04-01

    The mixture of poly(lactide-co-glycolide) (PLGA) and poly(ethylene vinyl acetate) (PEVA) forms a homogeneous liquid in an organic solvent such as tetrahydrofuran, and a phase-separated PLGA/PEVA composite can be prepared from it by evaporating the organic solvent. Exploiting this phenomenon, we designed a novel method of preparing a drug-loaded PLGA/PEVA composite and used it for coating drug-eluting stents (DESs). Paclitaxel (PTX), an anticancer drug, was chosen as a model drug. PLGA acts as a microdepot for PTX, and PEVA provides mechanical strength to the coating material. The presence of PLGA in the PLGA/PEVA composite suppressed PTX crystallization in the coating material, and PTX showed a sustained release rate over more than 30 days. The mechanical strength of the PLGA/PEVA composite was better than that of PEVA used as a control. After coating the stent with a PLGA/PEVA composite using ultrasonic atomizing spray, the morphology of the coated material was observed by scanning electron microscopy, and the release pattern of PTX was measured by high-performance liquid chromatography.

  5. Medium chain triglyceride (MCT) rich, paclitaxel loaded self nanoemulsifying preconcentrate (PSNP): a safe and efficacious alternative to Taxol.

    Science.gov (United States)

    Patel, Ketan; Patil, Anand; Mehta, Miten; Gota, Vikram; Vavia, Pradeep

    2013-12-01

    The current work was aimed to develop Medium Chain Triglyceride (MCT) rich self nanoemulsifying preconcentrate of paclitaxel (PTX) for parenteral delivery. Very high concentrations of Cremophor EL and ethanol in Taxol have rendered patients to severe side effects. Years of extensive research on development of cost effective and safer vehicle for PTX, have failed to provide a promising replacement for Taxol. MCT was selected as oil owing to its parenteral acceptability, high solubilization capacity and multiple therapeutic benefits in cancer cachexia. PTX precipitation kinetics and reported toxicity profile of Kolliphor HS15 has favored its selection for PTX Self Nanoemulsifying Preconcentrate (PSNP). Presence of 30% free PEG in Kolliphor HS15 (PEG-15-hydroxystearate) restricts its miscibility with MCT, imposing significant challenge in development of MCT rich self nanoemulsifying preconcentrate. Removal of PEG layer from oil-surfactant mixture facilitated the formulation of PSNP with 51% w/w MCT. PSNP exhibited better precipitation kinetic profile, higher PTX loading with negligible hemolysis and histamine release compared to Taxol. PSNP was bioequivalent to Taxol, though V(d) and MRT was significantly higher than Taxol. PSNP showed distinctly better profile in inhibiting tumor growth and maintaining body weight with significantly higher % survival. Thus, PSNP can be a safer vehicle with potential clinical benefits.

  6. Paclitaxel-loaded poly(lactide-co-glycolide)/poly(ethylene vinyl acetate) composite for stent coating by ultrasonic atomizing spray.

    Science.gov (United States)

    Yuk, Soon Hong; Oh, Keun Sang; Park, Jinah; Kim, Soon-Joong; Kim, Jung Ho; Kwon, Il Keun

    2012-04-01

    The mixture of poly(lactide-co-glycolide) (PLGA) and poly(ethylene vinyl acetate) (PEVA) forms a homogeneous liquid in an organic solvent such as tetrahydrofuran, and a phase-separated PLGA/PEVA composite can be prepared from it by evaporating the organic solvent. Exploiting this phenomenon, we designed a novel method of preparing a drug-loaded PLGA/PEVA composite and used it for coating drug-eluting stents (DESs). Paclitaxel (PTX), an anticancer drug, was chosen as a model drug. PLGA acts as a microdepot for PTX, and PEVA provides mechanical strength to the coating material. The presence of PLGA in the PLGA/PEVA composite suppressed PTX crystallization in the coating material, and PTX showed a sustained release rate over more than 30 days. The mechanical strength of the PLGA/PEVA composite was better than that of PEVA used as a control. After coating the stent with a PLGA/PEVA composite using ultrasonic atomizing spray, the morphology of the coated material was observed by scanning electron microscopy, and the release pattern of PTX was measured by high-performance liquid chromatography.

  7. Elevations of inflammatory markers PTX3 and sST2 after resuscitation from cardiac arrest are associated with multiple organ dysfunction syndrome and early death.

    Science.gov (United States)

    Ristagno, Giuseppe; Varpula, Tero; Masson, Serge; Greco, Marta; Bottazzi, Barbara; Milani, Valentina; Aleksova, Aneta; Sinagra, Gianfranco; Assandri, Roberto; Tiainen, Marjaana; Vaahersalo, Jukka; Kurola, Jouni; Barlera, Simona; Montanelli, Alessandro; Latini, Roberto; Pettilä, Ville; Bendel, Stepani; Skrifvars, Markus B

    2015-10-01

    A systemic inflammatory response is observed after cardiopulmonary resuscitation. We investigated two novel inflammatory markers, pentraxin 3 (PTX3) and soluble suppression of tumorigenicity 2 (sST2), in comparison with the classic high-sensitivity C-reactive protein (hsCRP), for prediction of early multiple organ dysfunction syndrome (MODS), early death, and long-term outcome after out-of-hospital cardiac arrest. PTX3, sST2, and hsCRP were assayed at ICU admission and 48 h later in 278 patients. MODS was defined as the 24 h non-neurological Sequential Organ Failure Assessment (SOFA) score ≥ 12. Intensive care unit (ICU) death and 12-month Cerebral Performance Category (CPC) were evaluated. In total, 82% of patients survived to ICU discharge and 48% had favorable neurological outcome at 1 year (CPC 1 or 2). At ICU admission, median plasma levels of hsCRP (2.8 mg/L) were normal, while levels of PTX3 (19.1 ng/mL) and sST2 (117 ng/mL) were markedly elevated. PTX3 and sST2 were higher in patients who developed MODS (p<0.0001). Admission levels of PTX3 and sST2 were also higher in patients who died in ICU and in those with an unfavorable 12-month neurological outcome (p<0.01). Admission levels of PTX3 and sST2 were independently associated with subsequent MODS [OR: 1.717 (1.221-2.414) and 1.340, (1.001-1.792), respectively] and with ICU death [OR: 1.536 (1.078-2.187) and 1.452 (1.064-1.981), respectively]. At 48 h, only sST2 and hsCRP were independently associated with ICU death. Higher plasma levels of PTX3 and sST2, but not of hsCRP, at ICU admission were associated with higher risk of MODS and early death.

  8. Core-shell nanocarriers with high paclitaxel loading for passive and active targeting

    Science.gov (United States)

    Jin, Zhu; Lv, Yaqi; Cao, Hui; Yao, Jing; Zhou, Jianping; He, Wei; Yin, Lifang

    2016-06-01

    Rapid blood clearance and premature burst release are inherent drawbacks of conventional nanoparticles, resulting in poor tumor selectivity. iRGD peptide is widely recognized as an efficient cell membrane penetration peptide homing to αVβ3 integrins. Herein, core-shell nanocapsules (NCs) and iRGD-modified NCs (iRGD-NCs) with high drug payload for paclitaxel (PTX) were prepared to enhance the antitumor activities of chemotherapy agents with poor water solubility. Improved in vitro and in vivo tumor targeting and penetration were observed with NCs and iRGD-NCs; the latter exhibited better antitumor activity because iRGD enhanced the accumulation and penetration of NCs in tumors. The NCs were cytocompatible, histocompatible, and non-toxic to other healthy tissues. The endocytosis of NCs was mediated by lipid rafts in an energy-dependent manner, leading to better cytotoxicity of PTX against cancer cells. In contrast with commercial product, PTX-loaded NCs (PTX-NCs) increased area under concentration-time curve (AUC) by about 4-fold, prolonged mean resident time (MRT) by more than 8-fold and reduced the elimination rate constant by greater than 68-fold. In conclusion, the present nanocarriers with high drug-loading capacity represent an efficient tumor-targeting drug delivery system with promising potential for cancer therapy.

  9. Preparation and Characterization of Paclitaxel Loaded SF/PLLA-PEG-PLLA Nanoparticles via Solution-Enhanced Dispersion by Supercritical CO2

    Directory of Open Access Journals (Sweden)

    Zheng Zhao

    2015-01-01

    Full Text Available Paclitaxel loaded silk fibroin/PLLA-PEG-PLLA (PTX-SF/PLLA-PEG-PLLA nanoparticles with a mean particle size of about 651 nm were fabricated successfully by the SEDS process. Fourier transform infrared (FTIR spectroscopy analysis indicated that the PTX was encapsulated by SF/PLLA-PEG-PLLA nanoparticles. X-ray powder diffraction (XRPD analysis supported the results of FTIR analysis and also suggested that the crystalline state of PTX was decreased obviously. Furthermore, the UV-Vis/HPLC analysis showed that drug load (DL and encapsulation efficiency (EE were 18.1% and 90.2%, respectively. The in vitro drug release experiment suggested that the PTX-SF/PLLA-PEG-PLLA nanoparticles exhibited a sustained release and only 16.1% and 24.5% of paclitaxel were released at pH 7.4 and 6.0, respectively, in one week. The PTX-SF/PLLA-PEG-PLLA nanoparticles drug delivery system with pH-dependent release property has potential application in the field of tumor therapy.

  10. Synergistic effect of graphene oxide coated nanotised apigenin with paclitaxel (GO-NA/PTX): A ROS dependent mitochondrial mediated apoptosis in ovarian cancer.

    Science.gov (United States)

    Pal, Manish Kumar; Jaiswar, Shyam Pyari; Dwivedi, Ashish; Goyal, Shruti; Dwivedi, Vinay Nand; Pathak, Anumesh Kumar; Kumar, Vinod; Sankhwar, Pushp Lata; Ray, Ratan Singh

    2017-04-24

    Ovarian cancer is most lethal among all gynecologic malignancies. Paclitaxel (PTX) is well used chemotherapeutic regimen for cancer control; however its undesired toxicity has been always a matter of concern for clinicians. Here we used the graphene oxide coated nanotised apigenin (GO-NA) as chemo sensitizing agent to enhance the efficacy of paclitaxel to overcome the limitations of chemotherapy. GO and GO-Apigenin was prepared by modified Hummers method and the nanoparticles were characterized by dynamic light scattering and transmission electron microscopy Human ovarian adenocarcinomas (SKOV-3) cells was treated by DMSO, Group I (Control)-McCoy's 5A Medium, Group II-Paclitaxel (5nM) alone, Group III- Nanotised Apigenin (GO-NA-10μM) Group IV- Paclitaxel (5nM) + GO-NA (10μM). Cell viability and IC-50 value were determined by MTT assay, synergism by Compusyn software, ROS by DCFH-DA assay, SOD activity by commercially available kit and MMP were examined by JC-1 and mitotracker/DAPI staining, cell cycle by flow cytometry, mRNA and protein level of apoptotic molecules caspase-3, Bax, and Bcl-2 were detected by Real Time-PCR and Western blot respectively. Results showed that GO-NA-PTX dramatically enhanced the anti-proliferative effect in synergistic manner as compare to GO-NA and PTX alone. GO-NA-PTX significantly suppressed the SOD activity, promotes the ROS accumulation, mitochondrial depolarization, DNA integrity and cell cycle arrest collectively accord the apoptotic cell death. In addition, results of immunocytochemistry, RT-PCR and western blot also supported the apoptosis by up-regulating the bax, caspase3 and down-regulation of Bcl2. Conclusively, our data showed the GO-NA-PTX may be a promising method for ovarian cancer chemotherapy. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  11. SB-T-121205, a next-generation taxane, enhances apoptosis and inhibits migration/invasion in MCF-7/PTX cells.

    Science.gov (United States)

    Zheng, Xiaowei; Wang, Changwei; Xing, Yuanming; Chen, Siying; Meng, Ti; You, Haisheng; Ojima, Iwao; Dong, Yalin

    2017-03-01

    Breast cancer is the leading cause of cancer death among women. Paclitaxel, a mitotic inhibitor, is highly effective in the treatment of breast cancer. However, development of resistance to paclitaxel limits its clinical use. Identifying new compounds and new strategies that are effective against breast cancer, in particular drug-resistant cancer, is of great importance. the aim of the present study was to explore the potential of a next-generation taxoid, SB-T-121205, in modulating the proliferation, migration and invasion of paclitaxel-resistant human breast cancer cells (MCF-7/PTX) and further evaluate the underlying molecular mechanisms. The results of MTT assay showed that SB-T-121205 has much higher potency to human breast cancer cells (MCF-7/S, MCF-7/PTX and MDA-MB-453 cells) than paclitaxel, while that the non-tumorigenic human bronchial epithelial cells (BEAS-2B) were slightly less sensitive to SB-T-121205 than paclitaxel. Flow cytometry and western blot methods revealed that SB-T-121205 induced cell cycle arrest at the G2/M phase and apoptosis in MCF-7/PTX cells through accelerating mitochondrial apoptotic pathway, resulting in reduction of Bcl-2/Bax ratio, as well as elevation of caspase-3, caspase-9, and poly(ADP-ribose) polymerase (PARP) levels. Moreover, SB-T-121205 changed epithelial-mesenchymal transition (EMT) property, and suppressed migration and invasion abilities of MCF-7/PTX cells. Additionally, SB-T-121205 exerted antitumor activity by inhibiting the transgelin 2 and PI3K/Akt pathway. These findings indicate that SB-T-121205 is a potent antitumor agent that promotes apoptosis and also recedes migration/invasion abilities of MCF-7/PTX cells by restraining the activity of transgelin 2 and PI3K/Akt, as well as mitochondrial apoptotic pathway. Such results suggest a potential clinical value of SB-T-121205 in breast cancer treatment.

  12. Interaction of CO with PtxAg1-x/Pt(111) surface alloys: More than dilution by Ag atoms

    Science.gov (United States)

    Schüttler, K. M.; Mancera, L. A.; Diemant, T.; Groß, A.; Behm, R. J.

    2016-08-01

    We have investigated CO adsorption on structurally well-defined PtxAg1-x/Pt(111) surface alloys, combining temperature-programmed desorption (TPD) and infrared reflection absorption spectroscopy (IRRAS) as well as density functional theory (DFT) based calculations. This is part of a systematic approach including previous studies of CO adsorption on closely related Pt(111)- and Pd(111)-based surface alloys. Following changes in the adsorption properties with increasing Ag content and correlating them with structural changes allow us to assign desorption features to specific adsorption sites/ensembles identified in previous scanning tunneling microscopy (STM) measurements, and thus to identify and separate contributions from different effects such as geometric ensemble effects and electronic ligand/strain effects. DFT calculations give further insight into the nature of the metal-CO bond on these bimetallic sites. Most prominently, the growth of a new CO desorption feature at higher temperature (~ 550 K) in the TPD spectra of Ag-rich surface alloys, which is unique for the group of Pt(111)- and Pd(111)-based surface alloys, is attributed to CO adsorption on Pt atoms surrounded by a Ag-rich neighborhood. Adsorption on these sites manifests in an IR band down-shifted to significantly lower wave number. Systematic comparison of the present results with previous findings for CO adsorption on the related Pt(111)- and Pd(111)-based surface alloys gains a detailed insight into general trends in the adsorption behavior of bimetallic surfaces.

  13. 正五聚蛋白3与扩张型心肌病的研究进展%Relationship between PTX3 and Idiopathic Dilated Cardiomyopathy

    Institute of Scientific and Technical Information of China (English)

    张艳春

    2013-01-01

    Myocarditis is a disease which causes inflammation of the cardiac muscle. There are two classifications of myocarditis梡rimary and secondary. Myocarditis is classed as secondary when there is a systemic disease at the time of diagnosis, otherwise it is classed as primary. Idiopathic dilated cardiomyopathy ( DCM ) accounts for 70 to 80 percent of primary myocarditis cases. Possible pathogenic factors of DCM are viral infection, autoimmune response and genetic factor. The inflammatory reaction is the critical factor in DCM. Pentranxin 3 ( PTX3 ) is a new inflammatory marker. This article examines the potential use of PTX3 in DCM.%原发性心肌病是一类原因不明、以心功能障碍为主要特征的心肌病变.扩张型心肌病约占原发性心肌病的70%~80%.目前扩张型心肌病发病机制分为三类:病毒感染、自身免疫炎症反应、遗传因素.炎症反应是介导扩张型心肌病发生的重要机制,正五聚蛋白3(PTX3)是一种新的炎症标志物,与C反应蛋白属于PTX家族.现主要针对穿透素3这种新的炎症标志物与扩张型心肌病关系的研究进展做一综述.

  14. Improved cytotoxicity of paclitaxel loaded in nanosized lipid carriers by intracellular delivery

    Energy Technology Data Exchange (ETDEWEB)

    Miao, Jing, E-mail: joemj1005@163.com, E-mail: miaojing@zju.edu.cn [Zhejiang University, Department of Pharmacy, the First Affiliated Hospital, College of Medicine (China); Du, Yongzhong; Yuan, Hong [Zhejiang University, College of Pharmaceutical Sciences (China); Zhang, Xingguo; Li, Qian; Rao, Yuefeng [Zhejiang University, Department of Pharmacy, the First Affiliated Hospital, College of Medicine (China); Zhao, Mengdan [Zhejiang University, Women’s Hospital, College of Medicine (China); Hu, Fuqiang, E-mail: hufq@zju.edu.cn [Zhejiang University, College of Pharmaceutical Sciences (China)

    2015-01-15

    Nanosized lipid carriers (NLC) can improve the limited drug-loading (DL) capacity and drug expulsion during storage, and adjust the drug release profile of solid lipid nanoparticles (SLN). In this study, Paclitaxel (PTX)-loaded NLC were prepared by solvent diffusion method using monostearin as solid lipid and oleic acid (OA) as liquid lipid matrix. The blank NLC with different OA content (the size range was from 89.5 ± 7.4 to 160.2 ± 34.6 nm) showed smaller size than the blank SLN (the size was 272.7 ± 43.6 nm), while the PTX-loaded NLC (the size range was from 481.3 ± 29.8 to 561.7 ± 38.3 nm) showed little bigger size, higher DL capacity, and faster drug in vitro release rate comparing with SLN (the size was 437.3 ± 68.2 nm). The 50 % cellular growth inhibitions (IC{sub 50}) of PTX-loaded NLC with 0, 5, 10, and 20 wt % OA were 0.92 ± 0.06, 0.69 ± 0.04, 0.25 ± 0.02, and 0.12 ± 0.02 µg mL{sup −1}, respectively, while the IC{sub 50} of Taxol{sup TM} was 1.72 ± 0.09 µg mL{sup −1}. For analyzing cellular drug effect, cellular uptakes of fluorescent NLC and intracellular drug concentration were investigated. As the incorporation of OA into solid lipid matrix could accelerate both the cellular uptake and the PTX delivery, loaded by NLC, the cytotoxicity of PTX could be enhanced, and further enhanced by increasing OA content in NLC.

  15. Preparation of Paclitaxel-loaded Solid Lipid Nanoparticles in Microchannels and Formulation Optimization%微通道内载紫杉醇固体脂质纳米粒制备及工艺优化

    Institute of Scientific and Technical Information of China (English)

    丁清; 洪伟勇; 贠军贤; 杨根生

    2012-01-01

    目的:制备载紫杉醇固体脂质纳米粒。方法:微通道内采用溶剂扩散法制备脂质纳米粒,并通过正交优化制备工艺。结果:制备的纳米粒稳定性良好,平均粒径为(129.87±2.91)nm,包封率为(3.11±0.06)%,载药率为(43.67±0.24)%。结论:本研究制备的载药固体脂质纳米粒载药特性与重复性良好。%Objective: To prepare paclitaxel loaded solid lipid nanoparticles(SLNs) with proper physicochemical property by rectangular microchannels.Methods: Paclitaxel loaded solid lipid nanoparticles(PTX-SLNs) was prepared by solvent diffusion method in rectangular microchannels.Orthogonal design was utilized to optimize prescription.Result: PTX-SLNs prepared with optimized prescription demonstrated good stability.The encapsulation efficiency and drug loading of PTX-SLNs were(43.67±0.24) % and(3.11±0.06) % respectively,the average size was(129.87±2.91) nm.Conclusion: PTX-SLNs has a good medicine characteristics and reproducibility.

  16. Biochemical characterization of the interactions between doxorubicin and lipidic GM1 micelles with or without paclitaxel loading

    Science.gov (United States)

    Leonhard, Victoria; Alasino, Roxana V; Bianco, Ismael D; Garro, Ariel G; Heredia, Valeria; Beltramo, Dante M

    2015-01-01

    Doxorubicin (Dox) is an anthracycline anticancer drug with high water solubility, whose use is limited primarily due to significant side effects. In this study it is shown that Dox interacts with monosialoglycosphingolipid (GM1) ganglioside micelles primarily through hydrophobic interactions independent of pH and ionic strength. In addition, Dox can be incorporated even into GM1 micelles already containing highly hydrophobic paclitaxel (Ptx). However, it was not possible to incorporate Ptx into Dox-containing GM1 micelles, suggesting that Dox could be occupying a more external position in the micelles. This result is in agreement with a higher hydrolysis of Dox than of Ptx when micelles were incubated at alkaline pH. The loading of Dox into GM1 micelles was observed over a broad range of temperature (4°C–55°C). Furthermore, Dox-loaded micelles were stable in aqueous solutions exhibiting no aggregation or precipitation for up to 2 months when kept at 4°C–25°C and even after freeze–thawing cycles. Upon exposure to blood components, Dox-containing micelles were observed to interact with human serum albumin. However, the amount of human serum albumin that ended up being associated to the micelles was inversely related to the amount of Dox, suggesting that both could share their binding sites. In vitro studies on Hep2 cells showed that the cellular uptake and cytotoxic activity of Dox and Ptx from the micellar complexes were similar to those of the free form of these drugs, even when the micelle was covered with albumin. These results support the idea of the existence of different nano-domains in a single micelle and the fact that this micellar model could be used as a platform for loading and delivering hydrophobic and hydrophilic active pharmaceutical ingredients. PMID:26005348

  17. Evaluation of anti-epileptic activity of fresh fruit juice of Moringa oleifera against maximal electroshock (M.E.S and Picrotoxin (PTX induced convulsions in mice.

    Directory of Open Access Journals (Sweden)

    Quazi Emadoddin

    2016-08-01

    Full Text Available Moringa oleifera (Moringaecea are used in Indian traditional medicine and in folklore for many diseases and extensively used as CNS depressant traditionally. The interesting things of this plant are each part of Moringa oleifera is used as medicines. The present work has been carried out to evaluate the anti-epileptic activity of fresh fruit juice of Moringa oleifera against maximal electroshock (M.E.S and Picrotoxin (PTX induced convulsions in mice at different dose level (100ml/kg. p.o & 50ml/kg. p.o. Diazepam (5mg/kg. p.o and Phenytoin (25mg/kg. i.p were used as reference standard drugs. The data obtained indicates that the fresh fruit juice of Moringa oleifera at the dose of (50ml/kg p.o & 100ml/kg p.o shows anticonvulsant activity against Maximal electroshock and Picrotoxin induced convulsion in mice.

  18. Anisotropy of iron-platinum-arsenide Ca10(PtnAs8)(Fe2-xPtxAs2)5 single crystals

    Science.gov (United States)

    Yuan, F. F.; Sun, Y.; Zhou, W.; Zhou, X.; Ding, Q. P.; Iida, K.; Hühne, R.; Schultz, L.; Tamegai, T.; Shi, Z. X.

    2015-07-01

    The upper critical field Hc2 anisotropy of Ca10(PtnAs8)(Fe2-xPtxAs2)5 (n = 3, 4) single crystals with long FeAs interlayer distance (d) was studied by angular dependent resistivity measurements. A scaling of the angular dependent resistivity was realized for both single crystals using the anisotropic Ginzburg-Landau (AGL) approach with an appropriate anisotropy parameter γ. The AGL scaling parameter γ increases with decreasing temperature and reaches a value of about 10 at 0.8Tc for both single crystals. These values are much larger than those of other iron-based superconductors (FeSCs). Remarkably, the values of γ2 show an almost linear increase with the FeAs/FeSe interlayer distance d for FeSCs. Compared to cuprates, FeSCs are less anisotropic, indicating that two dimensionality of the superconductivity is intrinsically weak.

  19. Feto-maternal correlation of PTX3, sFlt-1 and PlGF in physiological and pre-eclamptic pregnancies.

    Science.gov (United States)

    Algeri, Paola; Ornaghi, Sara; Bernasconi, Davide Paolo; Cappellini, Fabrizio; Signorini, Stefano; Brambilla, Paolo; Urban, Gabriele; Vergani, Patrizia

    2014-08-01

    PTX3, sFlt-1 and PlGF levels in maternal blood are altered in some obstetric diseases, such as preeclampsia (PE). Nonetheless, only few data on their expression in the fetal compartment have been reported so far. An observational study was performed by prospectively collecting maternal and fetal serum samples in 51 singleton pregnancies divided into two groups: 22 PE women and 29 healthy controls. The relationships between maternal and fetal marker serum levels were evaluated by Spearman correlation. A feto-maternal correlation was neither identified for PTX3 in either PE or control groups (1.1 versus 3.8 ng/ml, p = 0.17 and 0.9 versus 1.3 ng/ml, p = 0.30, respectively), nor for sFlt-1 and PlGF in healthy pregnancies (158.2 versus 3326.0 pg/ml, p = 0.28 and 11.0 versus 230.9 pg/ml, p = 0.51). In contrast, PE patients showed a significant positive feto-maternal correlation for both sFlt-1 and PlGF (324.1 versus 10 825.0 pg/ml and 7.8 versus 31.6 pg/ml, respectively, p = 0.02 for both markers). According to our results, an independent fetal production of the analyzed soluble angiogenic markers can be hypothesized in pregnancies complicated by PE.

  20. Superconducting properties and pseudogap from preformed Cooper pairs in the triclinic (CaFe1-xPtxAs ) 10Pt3As8

    Science.gov (United States)

    Surmach, M. A.; Brückner, F.; Kamusella, S.; Sarkar, R.; Portnichenko, P. Y.; Park, J. T.; Ghambashidze, G.; Luetkens, H.; Biswas, P. K.; Choi, W. J.; Seo, Y. I.; Kwon, Y. S.; Klauss, H.-H.; Inosov, D. S.

    2015-03-01

    Using a combination of muon-spin relaxation (μ SR ) , inelastic neutron scattering (INS), and nuclear magnetic resonance (NMR), we investigated the novel iron-based superconductor with a triclinic crystal structure (CaFe1-xPtxAs ) 10Pt3As8 (Tc=13 K), containing platinum-arsenide intermediary layers. The temperature dependence of the superfluid density obtained from the μ SR relaxation-rate measurements indicates the presence of two superconducting gaps, Δ1≫Δ2 . According to our INS measurements, commensurate spin fluctuations are centered at the (π ,0 ) wave vector, like in most other iron arsenides. Their intensity remains unchanged across Tc, indicating the absence of a spin resonance typical for many Fe-based superconductors. Instead, we observed a peak in the spin-excitation spectrum around ℏ ω0=7 meV at the same wave vector, which persists above Tc and is characterized by the ratio ℏ ω0/kBTc≈6.2 , which is significantly higher than typical values for the magnetic resonant modes in iron pnictides (˜4.3 ) . The temperature dependence of magnetic intensity at 7 meV revealed an anomaly around T*=45 K related to the disappearance of this new mode. A suppression of the spin-lattice relaxation rate, 1 /T1T , observed by NMR immediately below T* without any notable subsequent anomaly at Tc, indicates that T* could mark the onset of a pseudogap in (CaFe1-xPtxAs ) 10Pt3As8 , which is likely associated with the emergence of preformed Cooper pairs.

  1. Nanocomposite hydrogel incorporating gold nanorods and paclitaxel-loaded chitosan micelles for combination photothermal-chemotherapy.

    Science.gov (United States)

    Zhang, Nan; Xu, Xuefan; Zhang, Xue; Qu, Ding; Xue, Lingjing; Mo, Ran; Zhang, Can

    2016-01-30

    Development of combination photothermal-chemotherapy platform is of great interest for enhancing antitumor efficacy and inhibiting tumor recurrence, which supports selective and dose-controlled delivery of heat and anticancer drugs to tumor. Here, an injectable nanocomposite hydrogel incorporating PEGylated gold nanorods (GNRs) and paclitaxel-loaded chitosan polymeric micelles (PTX-M) is developed in pursuit of improved local tumor control. After intratumoral injection, both GNRs and PTX-M can be simultaneously delivered and immobilized in the tumor tissue by the thermo-sensitive hydrogel matrix. Exposure to the laser irradiation induces the GNR-mediated photothermal damage confined to the tumor with sparing the surrounding normal tissue. Synergistically, the co-delivered PTX-M shows prolonged tumor retention with the sustained release of anticancer drug to efficiently kill the residual tumor cells that evade the photothermal ablation due to the heterogeneous heating in the tumor region. This combination photothermal-chemotherapy presents superior effects on suppressing the tumor recurrence and prolonging the survival in the Heps-bearing mice, compared to the photothermal therapy alone.

  2. Systematic evaluation of multifunctional paclitaxel-loaded polymeric mixed micelles as a potential anticancer remedy to overcome multidrug resistance.

    Science.gov (United States)

    Zhang, Jiulong; Zhao, Xiufeng; Chen, Qing; Yin, Xiaoyi; Xin, Xiu; Li, Kexin; Qiao, Mingxi; Hu, Haiyang; Chen, Dawei; Zhao, Xiuli

    2017-03-01

    Multidrug resistance (MDR) of tumor cells is becoming the main reason for the failure of chemotherapy and P-glycoprotein (P-gp) mediated drug efflux has demonstrated to be the key factor for MDR. To address this issue, a novel pH-responsive mixed micelles drug delivery system composed of dextran-g-poly(lactide-co-glycolide)-g-histidine (HDP) and folate acid-D-α-tocopheryl polyethylene glycol 2000 (FA-TPGS2K) copolymers has been designed for the delivery of antitumor agent, paclitaxel (PTX) via FA-receptor mediated cell endocytosis, into PTX-resistant breast cancer MCF-7 cells (MCF-7/PTX). PTX-loaded FA-TPGS2K/HDP mixed micelles were characterized to have a small size distribution, high loading content and excellent pH-responsive drug release profiles. Compared with HDP micelles, FA-TPGS2K/HDP mixed micelles showed a higher cytotoxicity against MCF-7 and MCF-7/PTX cells due to the synergistic effect of FA-receptor mediated cell endocytosis, pH-responsive drug release and TPGS mediated P-gp inhibition. P-gp expression level, ATP content and mitochondrial membrane potential change have been measured, the results indicated blank FA-TPGS2K/HDP mixed micelles could inhibit the P-gp activity by reducing the mitochondrial membrane potential and depleting ATP content but not down-regulating the P-gp expression. In vivo antitumor activities demonstrated FA-TPGS2K/HDP mixed micelles could reach higher antitumor activity compared with HDP micelles for MCF-7/PTX tumor cells. Histological assay also indicated that FA-TPGS2K/HDP mixed micelles showed strongly apoptosis inducing effect, anti-proliferation effect and anti-angiogenesis effect. All these evidences demonstrated this pH-sensitive FA-TPGS2K/HDP micelle-based drug delivery system is a promising approach for overcoming MDR. In this work, a novel FA-TPGS2K copolymer has been synthesized and used it to construct mixed micelles with HDP copolymer to overcome MDR effect. Furthermore, a series in vitro and in vivo evaluations

  3. Relationship between Sustained Reductions in Plasma Lipid and Lipoprotein Concentrations with Apheresis and Plasma Levels and mRNA Expression of PTX3 and Plasma Levels of hsCRP in Patients with HyperLp(alipoproteinemia

    Directory of Open Access Journals (Sweden)

    Claudia Stefanutti

    2016-01-01

    Full Text Available The effect of lipoprotein apheresis (Direct Adsorption of Lipids, DALI (LA on plasma levels of pentraxin 3 (PTX3, an inflammatory marker that reflects coronary plaque vulnerability, and expression of PTX3 mRNA was evaluated in patients with hyperLp(alipoproteinemia and angiographically defined atherosclerosis/coronary artery disease. Eleven patients, aged 55±9.3 years (mean ± SD, were enrolled in the study. PTX3 soluble protein levels in plasma were unchanged by 2 sessions of LA; however, a downregulation of mRNA expression for PTX3 was observed, starting with the first session of LA (p<0.001. The observed reduction was progressively increased in the interval between the first and second LA sessions to achieve a maximum decrease by the end of the second session. A statistically significantly greater treatment-effect correlation was observed in patients undergoing weekly treatments, compared with those undergoing treatment every 15 days. A progressive reduction in plasma levels of C-reactive protein was also seen from the first session of LA, with a statistically significant linear correlation for treatment-effect in the change in plasma levels of this established inflammatory marker (R2=0.99; p<0.001. Our findings suggest that LA has anti-inflammatory and endothelium protective effects beyond its well-established efficacy in lowering apoB100-containing lipoproteins.

  4. Paclitaxel loaded biodegradable poly (sebacic acid-co-ricinoleic acid cylindrical implants for local delivery-in vitro characterization

    Directory of Open Access Journals (Sweden)

    Jagadeesh G Hiremath

    2013-01-01

    Full Text Available The aim of the present research work was to develop the biodegradable polymeric implant for the delivery of antineoplastic drug, paclitaxel (PTX using poly (sebacic-co-recinoleic acid 70:30 w/w. PTX loaded implants were prepared by indigenously developed melt molding technique. Implants were characterized in terms of physico-chemical evaluations, drug content, drug stability and intactness, thermal analysis, drug physical state and crystallinity, surface morphology, hydrolytic degradation, drug release and its kinetics. Prepared implants were yellow and cylindrical in shape with smooth surfaces. Drug in the implants was found to be stable, intact and uniformly dispersed as amorphous state within the polymer matrix. In vitro release, kinetic studies showed zero order and Korsmeyer-Peppas model release being exhibited. Drug release from the polymeric implants was occurred could be as results of diffusion.

  5. 瘤内注射用阳离子型紫杉醇乳脂体的制备及体外性质评价%Preparation and in vitro characterization of paclitaxel-loaded cationic nanoemulsomes for intratumoral drug delivery

    Institute of Scientific and Technical Information of China (English)

    李洪英; 肖衍宇; 苏志桂; 陈熙; 平其能

    2011-01-01

    [ Abstract ] Objective: To develop an appropriate nanocarrier for intratumoral drug delivery, paclitaxel loaded cationic nanoemulsomes (PTX-CTAB-NES) was prepared and investigated in vitro. Methods: PTX-CTAB-NES was prepared by solvent evaporation method. The formulation was optimized by central composite design. The morphology of PTX-CTAB-NES was observed by transmission electron microscopy (TEM). The mean particle size and zeta potential were measured by laser particle size analyzer. The state of drug in nanoemulsomes was confirmed by X-ray diffraction (XRD). Drug loading and encapsulation efficiency were determined by HPLC. Dialysis method at 37 ℃ was employed to investigate the in vitro release of PTX-CTAB-NES. In vitro cytotoxicity of PTX-CTAB-NES was evaluated in MCF-7 cells. Results; The obtained PTX-CTAB-NES was approximately spherical in shape with average particle size of 94. 0 nm and zeta potential of +48. 3 mV. The drug loading and encapsulation efficiency were 98. 0% and 3. 25% , respectively. The release of PTX-CTAB-NES was slowed down and the IC50 to MCF-7 human breast carcinoma cells was reduced compared with taxol injection. Conclusion; PTX-CTAB-NES with high positive charge and encapsulation efficiency, slow release as well as advanced cytotoxicity would be a promising nanocarrier for intratumoral drug delivery.%目的:制备适于瘤内给药的阳离子型紫杉醇乳脂体( PTX-CTAB-NES),并对其理化性质及细胞毒性进行评价.方法:采用溶剂蒸发法制备PTX-CTAB-NES,利用中心复合设计优化处方,透射电镜观察形态,纳米粒径仪测定粒径分布,XRD确证PTX在载体中的分散状态,HPLC法测定其包封率、载药量,透析法研究制剂的体外释药行为,并对其细胞毒性进行评价.结果:PTX-CTAB-NES呈类球形,可见明显指纹结构,平均粒径为94.0 nm,Zeta电位为+48.3 mV,包封率、载药量分别为98.0%和3.25%,PTX在载体中以非晶型状态存在.与Taxol注射液相比,阳离

  6. Load Measurements

    DEFF Research Database (Denmark)

    Kock, Carsten Weber; Vesth, Allan

    The report describes Load measurements carried out on a given wind turbine. The aim of the measurement program regarding the loads on the turbine is to verify the basic characteristics of the wind turbine and loads on the blades, the rotor and the tower, using [Ref 1], [Ref2] and [Ref 3]. Regarding...... the fatigue loads, the rotor, blades and tower moments are presented. The fatigue loads are evaluated using rainflow counting described in detail in Ref. [1]. The 1Hz equivalent load ranges are calculated at different wind speeds. All information regarding the instrumentation is collected in [ref 4] and [ref...

  7. Load Measurements

    DEFF Research Database (Denmark)

    Vesth, Allan; Kock, Carsten Weber

    The report describes Load measurements carried out on a given wind turbine. The aim of the measurement program regarding the loads on the turbine is to verify the basic characteristics of the wind turbine and loads on the blades, the rotor and the tower, using [Ref 1], [Ref2] and [Ref 3]. Regardi...

  8. Load Measurements

    DEFF Research Database (Denmark)

    Kock, Carsten Weber; Vesth, Allan

    The report describes Load measurements carried out on a given wind turbine. The aim of the measurement program regarding the loads on the turbine is to verify the basic characteristics of the wind turbine and loads on the blades, the rotor and the tower, using [Ref 1], [Ref2] and [Ref 3]. Regarding...

  9. Extracellular acidification synergizes with PDGF to stimulate migration of mouse embryo fibroblasts through activation of p38MAPK with a PTX-sensitive manner

    Energy Technology Data Exchange (ETDEWEB)

    An, Caiyan [Department of Biochemistry and Molecular Biology, College of Life Sciences, Inner Mongolia University, Hohhot, Inner Mongolia (China); Laboratory of Signal Transduction, Institute for Molecular and Cellular Regulation, Gunma University, Maebashi (Japan); Clinical Medicine Research Center of the Affiliated Hospital, Inner Mongolia Medical University, Hohhot, Inner Mongolia (China); Sato, Koichi [Laboratory of Signal Transduction, Institute for Molecular and Cellular Regulation, Gunma University, Maebashi (Japan); Wu, Taoya; Bao, Muqiri; Bao, Liang [Department of Biochemistry and Molecular Biology, College of Life Sciences, Inner Mongolia University, Hohhot, Inner Mongolia (China); Tobo, Masayuki [Laboratory of Signal Transduction, Institute for Molecular and Cellular Regulation, Gunma University, Maebashi (Japan); Damirin, Alatangaole, E-mail: bigaole@imu.edu.cn [Department of Biochemistry and Molecular Biology, College of Life Sciences, Inner Mongolia University, Hohhot, Inner Mongolia (China)

    2015-05-01

    The elucidation of the functional mechanisms of extracellular acidification stimulating intracellular signaling pathway is of great importance for developing new targets of treatment for solid tumors, and inflammatory disorders characterized by extracellular acidification. In the present study, we focus on the regulation of extracellular acidification on intracellular signaling pathways in mouse embryo fibroblasts (MEFs). We found extracellular acidification was at least partly involved in stimulating p38MAPK pathway through PTX-sensitive behavior to enhance cell migration in the presence or absence of platelet-derived growth factor (PDGF). Statistical analysis showed that the actions of extracellular acidic pH and PDGF on inducing enhancement of cell migration were not an additive effect. However, we also found extracellular acidic pH did inhibit the viability and proliferation of MEFs, suggesting that extracellular acidification stimulates cell migration probably through proton-sensing mechanisms within MEFs. Using OGR1-, GPR4-, and TDAG8-gene knock out technology, and real-time qPCR, we found known proton-sensing G protein-coupled receptors (GPCRs), transient receptor potential vanilloid subtype 1 (TRPV1), and acid-sensing ion channels (ASICs) were unlikely to be involved in the regulation of acidification on cell migration. In conclusion, our present study validates that extracellular acidification stimulates chemotactic migration of MEFs through activation of p38MAPK with a PTX-sensitive mechanism either by itself, or synergistically with PDGF, which was not regulated by the known proton-sensing GPCRs, TRPV1, or ASICs. Our results suggested that others proton-sensing GPCRs or ion channels might exist in MEFs, which mediates cell migration induced by extracellular acidification in the presence or absence of PDGF. - Highlights: • Acidic pH and PDGF synergize to stimulate MEFs migration via Gi/p38MAPK pathway. • Extracellular acidification inhibits the

  10. 叶酸靶向载紫杉醇磷脂-聚合物杂化纳米粒的制备及其体外细胞评价%Preparation and in vitro evaluation of folate-targeted lipid-polymer hybrid nanoparticles loaded with paclitaxel

    Institute of Scientific and Technical Information of China (English)

    陈卓; 王海; 肖宝; 胡春艳; 务圣洁; 樊帆; 秦玉; 朱敦皖; 张琳华

    2016-01-01

    Objective To prepare folate-targeted lipid-polymner hybrid nanoparticles loaded with paclitaxel (PTX-FLPNPs),evaluate its in vitro cellular uptake and cytotoxicity.Methods PTX-FLPNPs composed of PCL-PEG-PCL,DSPE-mPEG2000 and Folate-PEG(2000)-DSPE were prepared by thin-film hydration method,and characterized in terms of morphology,particle size and size distribution,drug loading and encapsulation efficiency.The uptake efficiency of FLPNPs in breast carcinoma cells EMT-6 was evaluated by confocal laser scanning microscopy.The cytotoxicity of PTX-FLPNPs against EMT-6 cells was determined by MTS assay.Results PTX-FLPNPs showed spherical core-shell morphology with narrow size distribution.The PTX-FLPNPs with 30% drugloading content were found as spherical shape with average particle diameter of (279.9±8.7) nm,polydispersity index of (0.173±0.021),Zeta potential of (-17.5±1.1) mV,drug loading of (27.36±.0.91)% and encapsulation efficiency of(91.16± 1.12)%.The internalization efficiency of FLPNPs was obviously higher that of LPNPs in EMT-6 cells which overexpress folate receptor (P<0.05).The cytotoxic effect of PTX-loaded FLPNPs was lower than that of PTX injection,but higher than that of PTX-loaded LPNPs (without folate conjugation).Conclusions The PTX-FLPNPs exhibits high drug-loading content and drug encapsulating efficiency,uniform size with narrow size distribution,high internalization efficiency in EMT6 cells by active targeting-mediated endocytosis.The PTX-FLPNPs would be a promising nanosized drug formulation for tumor-targeted therapy.%目的 制备具有叶酸靶向性的载紫杉醇磷脂-聚合物杂化纳米粒(PTX-FLPNPs),并研究其对乳腺癌细胞EMT-6的细胞毒性及体外细胞吞噬.方法 以聚己内酯-聚乙二醇-聚己内酯(PCL-PEG-PCL)、二硬脂酰基磷脂酰乙醇胺-甲氧基聚乙二醇(DSPE-mPEG2000)和叶酸偶联的磷脂(Folate-PEG(2000)-DSPE)为药物载体,通过薄膜水化法自组装制备PTX

  11. First-principle investigation of the interactions between PtxRu55-x (x = 0, 13, 42, 55) nanoparticles and [BMIM][PF6] ionic liquid

    Science.gov (United States)

    Cheng, Ping; Liu, Chuan; Yang, Yongpeng; Huang, Shiping

    2015-05-01

    Density functional theory calculations have been performed to characterize the interactions between [BMIM][PF6] ionic liquid and icosahedral PtxRu55-x (x = 0, 13, 42, 55) nanoparticles. In Ru13Pt42-[BMIM][PF6], only one F atom of the anion form the bond with nanoparticle, resulting in the smallest interaction energy (-0.56 eV). While in Pt13Ru42-[BMIM][PF6], two F atoms of the anion together with two C atoms of cation form the bonds with nanoparticle, resulting in the biggest interaction energy (-10.65 eV). The interaction between [BMIM][PF6] and Pt13Ru42 is so strong that it induces a significant distortion in the original core-shell structure of Pt13Ru42. Moreover, after interacting with [BMIM][PF6], the Pt55, Pt13Ru42 and Ru55 nanoparticles become more stable based on the negative relaxation energy. The d-band centers of Pt13Ru42 and Ru55 shift from -1.90, -1.78 eV up to -1.78, -1.56 eV, suggesting that the catalytic activities of Pt13Ru42 and Ru55 are enhanced.

  12. c9,t11-CLA-PTX与t10,c12-CLA-PTX对MCF-7细胞的体内外抗肿瘤作用%The anti-tumor efficacy of c9, t11-CLA-PTX and t10, c12-CLA-PTX on MCF-7 breast cancer cells: in vitro and in vivo

    Institute of Scientific and Technical Information of China (English)

    杨科; 李星火; 李丹; 柯曦宇; 张烜; 张强

    2014-01-01

    在前期研究中,CLA-mixture-PTX展现出了对黑色素瘤与脑胶质瘤一定的抗肿瘤作用.本研究旨在探索c9,t11-CLA-PTX与t10,c12-CLA-PTX对人源乳腺癌MCF-7细胞的体内外抗肿瘤作用.研究中考察了c9,t11-CLA-PTX与t10,c12-CLA-PTX的体外细胞摄取、细胞毒、细胞凋亡,以及细胞周期作用.用荷瘤BALB/c裸鼠研究了c9,t11-CLA-PTX与t10,c12-CLA-PTX的体内抗肿瘤作用.体外细胞毒研究结果表明:t10,c12-CLA-PTX的IC50为(0.17±0.02) μM,显著优于CLA-mixture-PTX(1.08±0.15) μM (P<0.01),后者显著优于c9,t11-CLA-PTX (6.50±1.20)μM (P<0.01).与空白对照组相比,c9,t11-CLA-PTX与t10,c12-CLA-PTX均可使细胞总凋亡比例增加(P<0.01);和CLA-mixture-PTX组相比,t10,c 12-CLA-PTX可使细胞总凋亡比例增加(P<0.01),c9,t11-CLA-PTX则使细胞总凋亡比例降低(P<0.01).与空白对照组相比,c9,t11-CLA-PTX与t10,c12-CLA-PTX均将细胞周期阻滞于S期与G2-M,与CLA-mixture-PTX相同.t10,c12-CLA-PTX的细胞摄取量显著高于CLA-mixture-PTX (P<0.01),后者的细胞摄取量显著高于c9,t11-CLA-PTX (P<0.01).体内抗肿瘤药效研究结果显示,t10,c12-CLA-PTX的抗肿瘤活性显著高于空白对照组和CLA-mixture-PTX组(P<0.01),而c9,t11-CLA-PTX的抗肿瘤活性仅高于空白对照组(P<0.01).上述结果表明,t10,c12-CLA-PTX对MCF-7细胞有显著体内外抗肿瘤作用,可以作为CLA-mixture-PTX的替代药物进行后续研究.

  13. The clinical effection of the treament of PTX and LFP in late esophagus carcinoma%PTX与LFP方案治疗晚期食管癌的临床观察

    Institute of Scientific and Technical Information of China (English)

    宋士军; 申家辉

    2008-01-01

    目的 观察紫杉醇(PTX)联合LFP方案治疗晚期食管癌的近期疗效及毒反应.方法 46例晚期食管癌采用PTX+LFP方案,PTX按周剂量给药,即PTX 80 mg/m2,静脉滴注,1次/周,连续2周,LFP方案常规给药.21 d为1个周期,至少完成两周期评价.结果 全组46例均可评价疗效,28例初治有效率67 8%,18例复治有效率50 0%,总有效率60 8%,主要毒副作用为骨髓抑制.结论 PLFP方案治疗晚期食管癌疗效较好,毒反应可以耐受,可作为治疗晚期食管癌的有效方案.

  14. Enhanced apoptotic and anticancer potential of paclitaxel loaded biodegradable nanoparticles based on chitosan.

    Science.gov (United States)

    Gupta, Umesh; Sharma, Saurabh; Khan, Iliyas; Gothwal, Avinash; Sharma, Ashok K; Singh, Yuvraj; Chourasia, Manish K; Kumar, Vipin

    2017-05-01

    Taxanes have established and proven effectivity against different types of cancers; in particular breast cancers. However, the high hemolytic toxicity and hydrophobic nature of paclitaxel and docetaxel have always posed challenges to achieve safe and effective delivery. Use of bio-degradable materials with an added advantage of nanotechnology could possibly improve the condition so as to achieve better and safe delivery. In the present study paclitaxel loaded chitosan nanoparticles were formulated and optimized using simple w/o nanoemulsion technique. The observed average size, pdi, zeta potential, entrapment efficiency and drug loading for the optimized paclitaxel loaded chitosan nanoparticle formulation (PTX-CS-NP-10) was 226.7±0.70nm, 0.345±0.039, 37.4±0.77mV, 79.24±2.95% and 11.57±0.81%; respectively. Nanoparticles were characterized further for size by Transmission Electron Microscopy (TEM). In vitro release studies exhibited sustained release pattern and more than 60% release was observed within 24h. Enhanced in vitro anticancer activity was observed as a result of MTT assay against triple negative MDA-MB-231 breast cancer cell lines. The observed IC50 values obtained for PTX-CS-NP-10 was 9.36±1.13μM and was almost 1.6 folds (p<0.05) less than the pure drug. Similarly, PTX-CS-NP-10 were extremely biocompatible and safe as observed for haemolytic toxicity which was almost 4 folds less (p<0.05) than the naïve drug. Anticancer activity was further evaluated using flow cytometry for apoptosis. Cell apoptosis study revealed that PTX-CS-NP-10 treatment resulted into enhanced (almost double) late cell apoptosis than naïve paclitaxel. Hence the developed nanoparticulate formulation not only reduced the overall toxicity but also resulted into improved anticancer efficacy of paclitaxel. It can be concluded that a robust, stable and comparatively safe nanoformulation of paclitaxel was developed, characterized and evaluated.

  15. Iron load

    Directory of Open Access Journals (Sweden)

    Filippo Cassarà

    2013-03-01

    Full Text Available Recent research addressed the main role of hepcidin in the regulation of iron metabolism. However, while this mechanism could be relevant in causing iron load in Thalassemia Intermedia and Sickle-Cell Anemia, its role in Thalassemia Major (TM is marginal. This is mainly due to the high impact of transfusional requirement into the severe increase of body iron. Moreover, the damage of iron load may be worsened by infections, as HCV hepatitis, or liver and endocrinological damage. One of the most relevant associations was found between splenectomy and increase of risk for mortality due,probably, to more severe iron load. These issues suggest as morbidity and mortality of this group of patients they do not depend only by our ability in controlling heart damage but even in preventing or treating particular infections and complications. This finding is supported by the impairment of survival curves in patients with complications different from heart damage. However, because, during recent years different direct and indirect methods to detect iron overload in patients affected by secondary hemochromatosis have been implemented, our ability to maintain under control iron load is significantly improved. Anyway, the future in iron load management remains to be able to have an iron load map of our body for targeting chelation and other medical treatment according to the single organ damage.

  16. Beam loading

    CERN Document Server

    Gamp, Alexander

    2013-01-01

    We begin by giving a description of the radio-frequency generator-cavity-beam coupled system in terms of basic quantities. Taking beam loading and cavity detuning into account, expressions for the cavity impedance as seen by the generator and as seen by the beam are derived. Subsequently methods of beam-loading compensation by cavity detuning, radio-frequency feedback and feedforward are described. Examples of digital radio-frequency phase and amplitude control for the special case of superconducting cavities are also given. Finally, a dedicated phase loop for damping synchrotron oscillations is discussed.

  17. Suppression for lung metastasis by depletion of collagen I and lysyl oxidase via losartan assisted with paclitaxel-loaded pH-sensitive liposomes in breast cancer.

    Science.gov (United States)

    Zhang, Li; Wang, Yang; Xia, Tai; Yu, Qianwen; Zhang, Qianyu; Yang, Yuting; Cun, Xingli; Lu, Libao; Gao, Huile; Zhang, Zhirong; He, Qin

    2016-10-01

    Tumor metastasis would seriously impair the efficacy of chemotherapy. Our previous studies showed losartan combined with paclitaxel-loaded pH-sensitive cleavable liposomes (PTX-Cl-Lip) facilitated paclitaxel accumulation and led to enhanced antitumor efficacy in 4T1 bearing mice. Since losartan could inhibit the level of collagen I which was related to tumor metastasis, this strategy was further applied to suppress tumor metastasis this time. Our in vivo anti-metastatic study manifested losartan could lower the colonies occupied in lungs by 76.4% compared with that of saline group. When losartan and PTX-Cl-Lip were combined, anti-metastatic efficiency reached to 88.2%, which was the best among all the groups. In vitro 3D tumor spheroids studies proved losartan could significantly suppress the invasion of tumor cells. Losartan plus PTX-Cl-Lip could further weaken the metastasis of tumor cells. Mechanism study showed the declination of collagen I level via losartan was caused by inhibition of active transforming growth factor-β1. Western-blot study showed losartan could decrease the level of lysyl oxidase, then inhibit the cross-linking of collagen I, finally weakened the cell signaling transmit via integrin and the metastasis of tumor cells was restrained. All above studies illustrated this combined tactic could achieve favorable effect on suppression of lung tumor metastasis.

  18. Carbohydrate Loading.

    Science.gov (United States)

    Csernus, Marilyn

    Carbohydrate loading is a frequently used technique to improve performance by altering an athlete's diet. The objective is to increase glycogen stored in muscles for use in prolonged strenuous exercise. For two to three days, the athlete consumes a diet that is low in carbohydrates and high in fat and protein while continuing to exercise and…

  19. Load sensor

    NARCIS (Netherlands)

    Van den Ende, D.; Almeida, P.M.R.; Dingemans, T.J.; Van der Zwaag, S.

    2007-01-01

    The invention relates to a load sensor comprising a polymer matrix and a piezo-ceramic material such as PZT, em not bedded in the polymer matrix, which together form a compos not ite, wherein the polymer matrix is a liquid crystalline resin, and wherein the piezo-ceramic material is a PZT powder for

  20. Carbohydrate Loading.

    Science.gov (United States)

    Csernus, Marilyn

    Carbohydrate loading is a frequently used technique to improve performance by altering an athlete's diet. The objective is to increase glycogen stored in muscles for use in prolonged strenuous exercise. For two to three days, the athlete consumes a diet that is low in carbohydrates and high in fat and protein while continuing to exercise and…

  1. Load testing circuit

    DEFF Research Database (Denmark)

    2009-01-01

    A load testing circuit a circuit tests the load impedance of a load connected to an amplifier. The load impedance includes a first terminal and a second terminal, the load testing circuit comprising a signal generator providing a test signal of a defined bandwidth to the first terminal of the load...

  2. Impact of Chronic Renal Failure on Safety and Effectiveness of Paclitaxel-Eluting Stents for Femoropopliteal Artery Disease: Subgroup Analysis from Zilver PTX Post-Market Surveillance Study in Japan.

    Science.gov (United States)

    Ogawa, Yukihisa; Yokoi, Hiroyoshi; Ohki, Takao; Kichikawa, Kimihiko; Nakamura, Masato; Komori, Kimihiro; Nanto, Shinsuke; O'Leary, Erin E; Lottes, Aaron E; Saunders, Alan T; Dake, Michael D

    2017-05-09

    Favorable long-term outcomes of the Zilver PTX drug-eluting stent (DES) in femoropopliteal lesions have been demonstrated. Chronic renal failure (CRF) has been shown to be a risk factor for restenosis and decreased limb salvage. The results of the DES in patients with CRF have not previously been reported. This study compares the results with the DES in patients with CRF and those without CRF. This retrospective analysis from the Zilver PTX Japan Post-Market Surveillance Study included 321 patients with CRF and 584 patients without CRF. Outcomes included freedom from target lesion revascularization (TLR) and patency. Of the patients included in this subgroup analysis, 2-year data were available for 209 patients in the CRF group and 453 patients in the non-CRF group. The two groups were similar in terms of lesion length and the frequency of in-stent restenosis. Critical limb ischemia, severe calcification, and diabetes were more common in patients with CRF, whereas total occlusion was more common in patients without CRF. Freedom from TLR rates were 81.4 versus 84.9% (p = 0.24), and patency rates were 70.7 versus 70.3% (p = 0.95) in patients with and without CRF at 2 years, respectively. This is the first comparative study of the DES in femoropopliteal artery lesions in patients with and without CRF. These results indicate that the DES placed in femoropopliteal artery lesions of CRF patients is safe and effective with similar patency and TLR rates to patients without CRF. Level 3, Post-Market Surveillance Study.

  3. Loads and loads and loads: The influence of prospective load, retrospective load, and ongoing task load in prospective memory

    Directory of Open Access Journals (Sweden)

    Beat eMeier

    2015-06-01

    Full Text Available In prospective memory tasks different kinds of load can occur. Adding a prospective memory task can impose a load on ongoing task performance. Adding ongoing task load can affect prospective memory performance. The existence of multiple target events increases prospective load and adding complexity to the to-be-remembered action increases retrospective load. In two experiments, we systematically examined the effects of these different types of load on prospective memory performance. Results showed an effect of prospective load on costs in the ongoing task for categorical targets (Experiment 2, but not for specific targets (Experiment 1. Retrospective load and ongoing task load both affected remembering the retrospective component of the prospective memory task. We suggest that prospective load can enhance costs in the ongoing task due to additional monitoring requirements. Retrospective load and ongoing task load seem to impact the division of resources between the ongoing task and retrieval of the retrospective component, which may affect disengagement from the ongoing task. In general, the results demonstrate that the different types of load affect prospective memory differentially.

  4. Electrical load detection aparatus

    DEFF Research Database (Denmark)

    2010-01-01

    A load detection technique for a load comprising multiple frequency-dependant sub-loads comprises measuring a representation of the impedance characteristic of the load; providing stored representations of a multiplicity of impedance characteristics of the load; each one of the stored representat...

  5. Aptamer conjugated paclitaxel and magnetic fluid loaded fluorescently tagged PLGA nanoparticles for targeted cancer therapy

    Energy Technology Data Exchange (ETDEWEB)

    Aravind, Athulya; Nair, Remya; Raveendran, Sreejith; Veeranarayanan, Srivani; Nagaoka, Yutaka; Fukuda, Takahiro; Hasumura, Takahashi; Morimoto, Hisao; Yoshida, Yasuhiko; Maekawa, Toru; Sakthi Kumar, D., E-mail: sakthi@toyo.jp

    2013-10-15

    Controlled and targeted drug delivery is an essential criterion in cancer therapy to reduce the side effects caused by non-specific drug release and toxicity. Targeted chemotherapy, sustained drug release and optical imaging have been achieved using a multifunctional nanocarrier constructed from poly (D, L-lactide-co-glycolide) nanoparticles (PLGA NPs), an anticancer drug paclitaxel (PTX), a fluorescent dye Nile red (NR), magnetic fluid (MF) and aptamers (Apt, AS1411, anti-nucleolin aptamer). The magnetic fluid and paclitaxel loaded fluorescently labeled PLGA NPs (MF-PTX-NR-PLGA NPs) were synthesized by a single-emulsion technique/solvent evaporation method using a chemical cross linker bis (sulfosuccinimidyl) suberate (BS3) to enable binding of aptamer on to the surface of the nanoparticles. Targeting aptamers were then introduced to the particles through the reaction with the cross linker to target the nucleolin receptors over expressed on the cancer cell surface. Specific binding and uptake of the aptamer conjugated magnetic fluid loaded fluorescently tagged PLGA NPs (Apt-MF-NR-PLGA NPs) to the target cancer cells induced by aptamers was observed using confocal microscopy. Cytotoxicity assay conducted in two cell lines (L929 and MCF-7) confirmed that targeted MCF-7 cancer cells were killed while control cells were unharmed. In addition, aptamer mediated delivery resulting in enhanced binding and uptake to the target cancer cells exhibited increased therapeutic effect of the drug. Moreover, these aptamer conjugated magnetic polymer vehicles apart from actively transporting drugs into specifically targeted tumor regions can also be used to induce hyperthermia or for facilitating magnetic guiding of particles to the tumor regions. - Highlights: • Aptamer escorted, theranostic biodegradable PLGA carriers were developed. • Can target cancer cells, control drug release, image and magnetically guide. • Highly specific to the targeted cancer cells thus delivering

  6. Aptamer conjugated paclitaxel and magnetic fluid loaded fluorescently tagged PLGA nanoparticles for targeted cancer therapy

    Science.gov (United States)

    Aravind, Athulya; Nair, Remya; Raveendran, Sreejith; Veeranarayanan, Srivani; Nagaoka, Yutaka; Fukuda, Takahiro; Hasumura, Takahashi; Morimoto, Hisao; Yoshida, Yasuhiko; Maekawa, Toru; Sakthi Kumar, D.

    2013-10-01

    Controlled and targeted drug delivery is an essential criterion in cancer therapy to reduce the side effects caused by non-specific drug release and toxicity. Targeted chemotherapy, sustained drug release and optical imaging have been achieved using a multifunctional nanocarrier constructed from poly (D, L-lactide-co-glycolide) nanoparticles (PLGA NPs), an anticancer drug paclitaxel (PTX), a fluorescent dye Nile red (NR), magnetic fluid (MF) and aptamers (Apt, AS1411, anti-nucleolin aptamer). The magnetic fluid and paclitaxel loaded fluorescently labeled PLGA NPs (MF-PTX-NR-PLGA NPs) were synthesized by a single-emulsion technique/solvent evaporation method using a chemical cross linker bis (sulfosuccinimidyl) suberate (BS3) to enable binding of aptamer on to the surface of the nanoparticles. Targeting aptamers were then introduced to the particles through the reaction with the cross linker to target the nucleolin receptors over expressed on the cancer cell surface. Specific binding and uptake of the aptamer conjugated magnetic fluid loaded fluorescently tagged PLGA NPs (Apt-MF-NR-PLGA NPs) to the target cancer cells induced by aptamers was observed using confocal microscopy. Cytotoxicity assay conducted in two cell lines (L929 and MCF-7) confirmed that targeted MCF-7 cancer cells were killed while control cells were unharmed. In addition, aptamer mediated delivery resulting in enhanced binding and uptake to the target cancer cells exhibited increased therapeutic effect of the drug. Moreover, these aptamer conjugated magnetic polymer vehicles apart from actively transporting drugs into specifically targeted tumor regions can also be used to induce hyperthermia or for facilitating magnetic guiding of particles to the tumor regions.

  7. Altered Cell Cycle Arrest by Multifunctional Drug-Loaded Enzymatically-Triggered Nanoparticles.

    Science.gov (United States)

    Huang, Can; Sun, Ying; Shen, Ming; Zhang, Xiangyu; Gao, Pei; Duan, Yourong

    2016-01-20

    cRGD-targeting matrix metalloproteinase (MMP)-sensitive nanoparticles [PLGA-PEG1K-cRGD/PLGA-peptide-PEG5K (NPs-cRGD)] were successfully developed. Au-Pt(IV) nanoparticles, PTX, and ADR were encapsulated into NPs-RGD separately. The effects of the drug-loaded nanoparticles on the cell cycle were investigated. Here, we showed that higher cytotoxicity of drug-loaded nanoparticles was related to the cell cycle arrest, compared to that of free drugs. The NPs-cRGD studied here did not disrupt cell cycle progression. The cell cycle of Au-Pt(IV)@NPs-cRGD showed a main S phase arrest in all phases of the cell cycle phase, especially in G0/G1 phase. PTX@NPs-cRGD and ADR@NPs-cRGD showed a higher ratio of G2/M and S phase arrest than the free drugs, respectively. Cells in G0/G1 and S phases of the cell cycle had a higher uptake ratio of NPs-cRGD. A nutrient deprivation or an increase in the requirement of nutrients in tumor cells could promote the uptake of nanoparticles from the microenvironments. In vivo, NPs-cRGD could efficiently accumulate at tumor sites. The inhibition of tumor growth coupled with cell cycle arrest is in line with that in vitro. On the basis of our results, we propose that future studies on nanoparticle action mechanism should consider the cell cycle, which could be different from free drugs. Understanding the actions of cell cycle arrest could affect the application of nanomedicine in the clinic.

  8. Curcumin as fluorescent probe for directly monitoring in vitro uptake of curcumin combined paclitaxel loaded PLA-TPGS nanoparticles

    Science.gov (United States)

    Nguyen, Hoai Nam; Thu Ha, Phuong; Sao Nguyen, Anh; Nguyen, Dac Tu; Doan Do, Hai; Nguyen Thi, Quy; Nhung Hoang Thi, My

    2016-06-01

    Theranostics, which is the combination of both therapeutic and diagnostic capacities in one dose, is a promising tool for both clinical application and research. Although there are many chromophores available for optical imaging, their applications are limited due to the photobleaching property or intrinsic toxicity. Curcumin, a natural compound extracted from the rhizome of curcuma longa, is well known thanks to its bio-pharmaceutical activities and strong fluorescence as biocompatible probe for bio-imaging. In this study, we aimed to fabricate a system with dual functions: diagnostic and therapeutic, based on poly(lactide)-tocopheryl polyethylene glycol succinate (PLA-TPGS) micelles co-loaded curcumin (Cur) and paclitaxel (PTX). Two kinds of curcumin nanoparticle (NP) were fabricated and characterized by Fourier transform infrared spectroscopy, field emission scanning electron microscopy and dynamic light scattering methods. The cellular uptake and fluorescent activities of curcumin in these systems were also tested by bioassay studies, and were compared with paclitaxe-oregon. The results showed that (Cur + PTX)-PLA-TPGS NPs is a potential system for cancer theranostics.

  9. Distribution load estimation (DLE)

    Energy Technology Data Exchange (ETDEWEB)

    Seppaelae, A.; Lehtonen, M. [VTT Energy, Espoo (Finland)

    1998-08-01

    The load research has produced customer class load models to convert the customers` annual energy consumption to hourly load values. The reliability of load models applied from a nation-wide sample is limited in any specific network because many local circumstances are different from utility to utility and time to time. Therefore there is a need to find improvements to the load models or, in general, improvements to the load estimates. In Distribution Load Estimation (DLE) the measurements from the network are utilized to improve the customer class load models. The results of DLE will be new load models that better correspond to the loading of the distribution network but are still close to the original load models obtained by load research. The principal data flow of DLE is presented

  10. Wind Loads on Structures

    DEFF Research Database (Denmark)

    Dyrbye, Claes; Hansen, Svend Ole

    pressure to structural response) and design criteria. Starting with an introduction of the wind load chain, the book moves on to meteorological considerations, atmospheric boundary layer, static wind load, dynamic wind load and scaling laws used in wind-tunnel tests. The dynamic wind load covers vibrations......Wind loads have to be taken into account when designing civil engineering structures. The wind load on structures can be systematised by means of the wind load chain: wind climate (global), terrain (wind at low height), aerodynamic response (wind load to pressure), mechanical response (wind...

  11. Distribution load estimation - DLE

    Energy Technology Data Exchange (ETDEWEB)

    Seppaelae, A. [VTT Energy, Espoo (Finland)

    1996-12-31

    The load research project has produced statistical information in the form of load models to convert the figures of annual energy consumption to hourly load values. The reliability of load models is limited to a certain network because many local circumstances are different from utility to utility and time to time. Therefore there is a need to make improvements in the load models. Distribution load estimation (DLE) is the method developed here to improve load estimates from the load models. The method is also quite cheap to apply as it utilises information that is already available in SCADA systems

  12. Wind Loads on Structures

    DEFF Research Database (Denmark)

    Dyrbye, Claes; Hansen, Svend Ole

    pressure to structural response) and design criteria. Starting with an introduction of the wind load chain, the book moves on to meteorological considerations, atmospheric boundary layer, static wind load, dynamic wind load and scaling laws used in wind-tunnel tests. The dynamic wind load covers vibrations......Wind loads have to be taken into account when designing civil engineering structures. The wind load on structures can be systematised by means of the wind load chain: wind climate (global), terrain (wind at low height), aerodynamic response (wind load to pressure), mechanical response (wind...

  13. Fabrication of hydrophilic paclitaxel-loaded PLA-PEG-PLA microparticles via SEDS process

    Institute of Scientific and Technical Information of China (English)

    Ping OUYANG; Yun-qing KANG; Guang-fu YIN; Zhong-bing HUANG; Ya-dong YAO; Xiao-ming LIAO

    2009-01-01

    In this work, chemically bonded poly(D, L-lactide)-polyethylene glycol-poly(D, L-lactide) (PLA-PEG-PLA) triblock copolymers with various PEG contents and PLA homopolymer were synthesized via melt polymerization, and were confirmed by FTIR and 1 H-NMR results. The molecular weight and polydispersity of the synthesized PLA and PLA-PEG-PLA copolymers were investigated by gel permeation chromatography. Hydro-philicity of the copolymers was identified by contact angle measurement. PLA-PEG-PLA and PLA microparticles loaded with and without PTX were then produced via solution enhanced dispersion by supercritical CO2 (SEDS) process. The effect of the PEG content on the particle size distribution, morphology, drug load, and encapsulation efficiency of the fabricated microparticles was also studied. Results indicate that PLA and PLA-PEG-PLA micropar-ticles all exhibit sphere-like shape with smooth surface, when PEG content is relatively low. The produced microparticles have narrow particle size distributions and small particle sizes. The drug load and encapsulation efficiency of the produced microparticles decreases with higher PEG content in the copolymer matrix. Moreover, high hydrophilicity is found when PEG is chemically attached to originally hydrophobic PLA, providing the produced drug-loaded microparticles with high hydrophi-licity, biocompatibility, and prolonged circulation time, which are considered of vital importance for vessel-circulating drug delivery system.

  14. High Power Disk Loaded Guide Load

    Energy Technology Data Exchange (ETDEWEB)

    Farkas, Z.D.; /SLAC

    2006-02-22

    A method to design a matching section from a smooth guide to a disk-loaded guide, using a variation of broadband matching, [1, 2] is described. Using this method, we show how to design high power loads. The load consists of a disk-loaded coaxial guide operating in the TE{sub 01}-mode. We use this mode because it has no electric field terminating on a conductor, has no axial currents, and has no current at the cylinder-disk interface. A high power load design that has -35 dB reflection and a 200 MHz, -20 dB bandwidth, is presented. It is expected that it will carry the 600 MW output peak power of the pulse compression network. We use coaxial geometry and stainless steel material to increase the attenuation per cell.

  15. Surface chemistry dependent "switch" regulates the trafficking and therapeutic performance of drug-loaded carbon nanotubes.

    Science.gov (United States)

    Das, Manasmita; Singh, Raman Preet; Datir, Satyajit R; Jain, Sanyog

    2013-04-17

    The present study explores the possibility of exploiting surface functionality as one of the key regulators for modulating the intracellular trafficking and therapeutic performance of drug loaded carbon nanotubes (CNTs). In line with that approach, a series of biofunctionalized multiwalled carbon nanotubes (f-CNTs 1-6) decorated with various functional molecules including antifouling polymer (PEG), tumor recognition modules (folic acid/hyaluronic acid/estradiol), and fluorophores (rhodamine B isothiocyanate/Alexa Fluor) were synthesized. By loading different anticancer agents (methotrexate (MTX), doxorubicin (DOX), and paclitaxel (PTX)) onto each functionalized CNT preparation, we tried to elucidate how the surface functional molecules associated with each f-CNT influence their therapeutic potential. We observed that antiproliferative or apoptotic activity of drug-loaded CNTs critically depends on their mechanistic pathway of cellular internalization and intracellular trafficking, which in turn had an intimate rapport with their surface chemistry. To our knowledge, for the first time, we have embarked on the possibility of using a surface chemistry dependent "switch" to remote-control the second and third order targeting of chemotherapeutic agents supramolecularly complexed/adsorbed on CNTs, which in turn is expected to benefit the development of futuristic nanobots for cancer theranostics.

  16. Lightening the Load

    OpenAIRE

    Remington, Anna M.; Swettenham, John G.; Lavie, Nilli

    2012-01-01

    Autism spectrum disorder (ASD) research portrays a mixed picture of attentional abilities with demonstrations of enhancements (e.g., superior visual search) and deficits (e.g., higher distractibility). Here we test a potential resolution derived from the Load Theory of Attention (e.g., Lavie, 2005). In Load Theory, distractor processing depends on the perceptual load of the task and as such can only be eliminated under high load that engages full capacity. We hypothesize that ASD involves enh...

  17. Taking a Load Off.

    Science.gov (United States)

    Kenny, John

    1995-01-01

    Discusses the snow -load capacity of school roofs and how understanding this data aids in planning preventive measures and easing fear of roof collapse. Describes how to determine snow-load capacity, and explains the load-bearing behavior of flat versus sloped roofs. Collapse prevention measures are highlighted. (GR)

  18. 地塞米松诱导人肺腺癌A549细胞对紫杉醇耐药性及Bcl-xL基因表达的影响%Influence of lung adenocarcinoma A549 cells induced by dexamethasone on the drug resistance of PTX and expression of Bcl-xL gene

    Institute of Scientific and Technical Information of China (English)

    康马飞; 李林凤

    2014-01-01

    Objective To observe the changes of the drug resistance of lung adenocarcinoma A549 cells and the expres-sion of mRNA and protein of Bcl-xL in human lung adenocarcinoma A549 cell after dexamethasone(DEX) pretreatment in dif-ferent concentrations and intervention with paclitaxel(PTX),and to explore the molecular mechanism of DEX-induced A549 cell to the drug resistance of PTX. Methods The cell viability rate of lung adenocarcinoma A549 cells was determined by MTT assay after treatment of different concentrations of PTX,and to screen the half inhibitory concentration(IC50) of PTX. The cell viability rate of A549 cells which pretreated with different concentrations of DEX and different concentrations of PTX was determined by MTT assay,and the expression level of mRNA and protein of Bcl-xL in the A549 cells were determined by reverse transcriptase-poly merase chain reaction(RT-PCR) and Western blotting. Results After being pretreated with DEX in different concentrations, A549 cells were induced to resist to PTX,and the rate of resistance increased gradually with the increasing concentrations of DEX and the expression level of Bcl-xL gene and protein also increased gradually with the increasing of DEX concentrations. Conclu-sions DEX can induce resistance to PTX in lung adenocarcinoma A549 cells ,whose mechanism might be involved in increase of Bcl-xL gene(anti-apoptosis gene) in DEX-induced lung adenocarcinoma A549 cells.%目的:观察紫杉醇(PTX)干预不同浓度地塞米松(DEX)预处理人肺腺癌A549细胞后的耐药情况和Bcl-xL基因及蛋白表达变化,探讨DEX诱导A549细胞对PTX产生耐药的分子机制。方法采用四甲基偶氮唑蓝比色法(MTT法)测定不同浓度PTX作用于A549细胞后的细胞存活率,筛选出PTX的半数抑制浓度(IC50);用不同浓度DEX预处理A549细胞后,再给予不同浓度PTX作用于A549细胞,用MTT法测定细胞存活率,逆转录-聚合酶链反应和蛋白质印迹法

  19. Spatial electric load forecasting

    CERN Document Server

    Willis, H Lee

    2002-01-01

    Spatial Electric Load Forecasting Consumer Demand for Power and ReliabilityCoincidence and Load BehaviorLoad Curve and End-Use ModelingWeather and Electric LoadWeather Design Criteria and Forecast NormalizationSpatial Load Growth BehaviorSpatial Forecast Accuracy and Error MeasuresTrending MethodsSimulation Method: Basic ConceptsA Detailed Look at the Simulation MethodBasics of Computerized SimulationAnalytical Building Blocks for Spatial SimulationAdvanced Elements of Computerized SimulationHybrid Trending-Simulation MethodsAdvanced

  20. Duration of load revisited

    DEFF Research Database (Denmark)

    Hoffmeyer, Preben; Sørensen, John Dalsgaard

    2007-01-01

    were formed. Four groups were subjected to short-term strength tests, and four groups were subjected to long-term tests. Creep and time to failure were moni-tored. Time to failure as a function of stress level was established and the reliability of stress level assessment was discussed. A significant...... mechanosorptive effect was demonstrated both in terms of increased creep and shortening of time to failure. The test results were employed for the calibration of four existing duration of load models. The effect of long-term loading was expressed as the stress level SL50 to cause failure after 50 years of loading...... and of the short-term and long-term strengths. For permanent and imposed library loads, reliability-based estimation of the load duration factor gave almost the same results as direct, deterministic calibration. Keywords: Creep, damage models, duration of load, equal rank assumption, load duration factor, matched...

  1. Optimisation of load control

    Energy Technology Data Exchange (ETDEWEB)

    Koponen, P. [VTT Energy, Espoo (Finland)

    1998-08-01

    Electricity cannot be stored in large quantities. That is why the electricity supply and consumption are always almost equal in large power supply systems. If this balance were disturbed beyond stability, the system or a part of it would collapse until a new stable equilibrium is reached. The balance between supply and consumption is mainly maintained by controlling the power production, but also the electricity consumption or, in other words, the load is controlled. Controlling the load of the power supply system is important, if easily controllable power production capacity is limited. Temporary shortage of capacity causes high peaks in the energy price in the electricity market. Load control either reduces the electricity consumption during peak consumption and peak price or moves electricity consumption to some other time. The project Optimisation of Load Control is a part of the EDISON research program for distribution automation. The following areas were studied: Optimization of space heating and ventilation, when electricity price is time variable, load control model in power purchase optimization, optimization of direct load control sequences, interaction between load control optimization and power purchase optimization, literature on load control, optimization methods and field tests and response models of direct load control and the effects of the electricity market deregulation on load control. An overview of the main results is given in this chapter

  2. 叶酸受体靶向载紫杉醇高分子造影剂体外寻靶及超声显影实验研究%In vitro study of folate receptor-targeted and paclitaxel-loaded ultrasound contrast agent

    Institute of Scientific and Technical Information of China (English)

    何子朋; 王志刚; 李攀; 王冬; 柯青兰; 岳媛媛

    2014-01-01

    Objective To prepare the folate receptor-targeted and paclitaxel-loaded ultrasound contrast agent (folate-poly(lactide-co-glycolide)-paclitaxel,FOL-PLGA-PTX) and to investigate its targeting and imaging performance in vitro.Methods Paclitaxel-loaded PLGA-COOH micmcapsules with a core of liquid perfluorocarbon (PLGA-PTX) were prepared using single emulsion technique and then conjugated with folate by carbodiimide method.The size,surface potential,entrapment efficiency and drug loading efficiency were measured by Malvern laser detector and HPLC.The connectivity condition of PLGA-PTX with folate and the binding rate of fluorescent antibody were detected by immunofluorescence staining and flow cytometry.The targeting performance of FOL-PLGA-PTX was checked after co-incubated with human SKOV3cell lines in vitro and compared with that of non-targeted group and free folic acid intervention group.In vitro experiments were performed to explore the effects of FOL-PLGA-PTX on the enhancement of ultrasound imaging after irradiation by high intensity focused ultrasound (HIFU).Two-sample t test and one-way analysis of variance were used to analyze data.Results The average diameter of FOL-PLGA-PTX was (244.43 ±13.32) nm,with the drug entrapment efficiency of (86.23 ± 1.23)% and loading amount of (8.62±0.12)%.The binding rate of folate was as high as (98.49± 1.28)%.The connection rate of FOL-PLGAPTX on SKOV3 cells was higher than that of non-targeted group ((84.32±4.25) % vs (16.45±2.89) %; F289.45,t=10.654,P<0.01) and the free folic acid intervention group ((36.33±3.23)%; t=8.923,P<0.01).During in vitro ultrasound imaging,the average grey scale of FOL-PLGA-PTX before HIFU irradiation was significantly lower than that after HIFU irradiation (39.32±3.64 vs 126.44±7.15 ; t =4.829,P<0.01).Conclusion FOL-PLGA-PTX has been prepared successfully,with high entrapment efficiency and much drug loading,which can target to SKOV3 cells specifically and effectively

  3. Anchor Loads on Pipelines

    OpenAIRE

    Wei, Ying

    2015-01-01

    Anchor hooking on a subsea pipeline has been investigated in this thesis. Anchor loads on pipelines is in general a rarely occurring event, however, the severity when it occurs could easily jeopardize the integrity of any pipeline. It is considered as an accidental load in the design of pipelines. Pipeline Loads, limit state criteria and anchor categories are defined by the DNV standards. For pipeline, DNV-OS-F101 (08.2012), Submarine Pipeline Systems is adopted. Offshore standard DNV-RP...

  4. Load induced blindness

    OpenAIRE

    Macdonald, J. S. P.; Lavie, N.

    2008-01-01

    Although the perceptual load theory of attention has stimulated a great deal of research, evidence for the role of perceptual load in determining perception has typically relied oil indirect measures that infer perception from distractor effects on reaction times or neural activity (see N. Lavie, 2005. for a review). Here we varied the level of perceptual load in a letter-search task and assessed its effect oil the conscious perception of a search-irrelevant shape stimulus appearing in the pe...

  5. Concentrated loads on concrete

    DEFF Research Database (Denmark)

    Lorenzen, Karen Grøndahl; Nielsen, Mogens Peter

    1997-01-01

    This report deals with concentrated loads on concrete.A new upper bound solution in the axisymmetrical case of a point load in the center of the end face of a cylinder is developed.Based on previous work dealing with failure mechanisms and upper bound solutions, new approximate formulas are devel......This report deals with concentrated loads on concrete.A new upper bound solution in the axisymmetrical case of a point load in the center of the end face of a cylinder is developed.Based on previous work dealing with failure mechanisms and upper bound solutions, new approximate formulas...

  6. Concentrated loads on concrete

    DEFF Research Database (Denmark)

    Lorenzen, Karen Grøndahl; Nielsen, Mogens Peter

    1997-01-01

    This report deals with concentrated loads on concrete.A new upper bound solution in the axisymmetrical case of a point load in the center of the end face of a cylinder is developed.Based on previous work dealing with failure mechanisms and upper bound solutions, new approximate formulas are devel......This report deals with concentrated loads on concrete.A new upper bound solution in the axisymmetrical case of a point load in the center of the end face of a cylinder is developed.Based on previous work dealing with failure mechanisms and upper bound solutions, new approximate formulas...

  7. Critical Axial Load

    Directory of Open Access Journals (Sweden)

    Walt Wells

    2008-01-01

    Full Text Available Our objective in this paper is to solve a second order differential equation for a long, simply supported column member subjected to a lateral axial load using Heun's numerical method. We will use the solution to find the critical load at which the column member will fail due to buckling. We will calculate this load using Euler's derived analytical approach for an exact solution, as well as Euler's Numerical Method. We will then compare the three calculated values to see how much they deviate from one another. During the critical load calculation, it will be necessary to calculate the moment of inertia for the column member.

  8. Electrical load modeling

    Energy Technology Data Exchange (ETDEWEB)

    Valgas, Helio Moreira; Pinto, Roberto del Giudice R.; Franca, Carlos [Companhia Energetica de Minas Gerais (CEMIG), Belo Horizonte, MG (Brazil); Lambert-Torres, Germano; Silva, Alexandre P. Alves da; Pires, Robson Celso; Costa Junior, Roberto Affonso [Escola Federal de Engenharia de Itajuba, MG (Brazil)

    1994-12-31

    Accurate dynamic load models allow more precise calculations of power system controls and stability limits, which are critical mainly in the operation planning of power systems. This paper describes the development of a computer program (software) for static and dynamic load model studies using the measurement approach for the CEMIG system. Two dynamic load model structures are developed and tested. A procedure for applying a set of measured data from an on-line transient recording system to develop load models is described. (author) 6 refs., 17 figs.

  9. 载紫杉醇-阿霉素微泡的制备以及控制释放研究%Preparation and controlled-release characteristics of microbubbles loaded with paclitaxel and doxorubicin

    Institute of Scientific and Technical Information of China (English)

    李露; 陈娟娟; 刘先俊

    2012-01-01

    Objective To prepare ultrasound microbubbles ( MBs) which can simultaneously load two anticancer drugs and investigate the drug-loading capacity and controlled-release characteristics. Methods MBs were fabricated by mechanical oscillation. Paclitaxel (PTX) was embedded into the membrane of MBs, and liposomes loaded with doxorubicin ( DOX) were connected with MBs by biotin avidin linker system. The properties of prepared MBs were analyzed for their size by particle size analyzer and for their surface features by fluorescent microscopy. UV-visible spectrometry and multi-function microplate reader were used to identify their loaded doses of PTX and DOX respectively. The efficiency of ultrasound mediated drug release were identified by measuring the amount of PTX and DOX releasing from MBs. Results The prepared MBs were in an average diameter of (1.45 ± 0.27) jxm with red fluorescent surrounding. When 3 mg phospholipid was given, the maximum of PTX encapsulation efficiency was (54. 64 ± 2. 98) % and each 1 x 108 microbubbles containing (4.52 ±0.53) μg DOX. When ultrasonic applications had the mechanical index of 1. 0 ( MI = 1. 0), the destruction of the MBs was 90% and the efficiency of PTX and DOX releasing were 15% and 80% , respectively. Conclusion Ultrasound radiation triggers drugs releasing from MBs, which might be used as an effective drug carrier that combining ultrasound image and drug delivery in the field of oncology treatment.%目的 制备能同时携带2种抗肿瘤药物的脂质微泡,对其载药量以及体外控制释放能力进行研究.方法 以机械振荡法制备脂质微泡,嵌入法对紫杉醇进行装载以及生物素-亲和素体系连接阿霉素脂质体.粒径分析仪以及荧光显微镜对其表征分析,紫外分光光度法以及酶标仪分别测定紫杉醇和阿霉素载药量;在超声辐照条件下,促使微泡对紫杉醇以及阿霉素的释放,并测定各自药物释放量确定超声辐照微

  10. Combination of external loads

    Energy Technology Data Exchange (ETDEWEB)

    Frandsen, S.; Tarp Johansen, N.J.; Joergensen, H. [Forskningscenter Risoe, Roskilde (Denmark); Gravesen, H.; Soerensen, S.L. [Carl Bro, Glostrup (Denmark); Pedersen, J. [Elsam Engineering, Fredericia (Denmark); Zorn, R.; Hvidberg Knudsen, M. [DHI Water and Environment, Hoersholm (Denmark); Voelund, P. [Energi E2, Koebenhavn (Denmark)

    2003-09-01

    The project onbectives have been: To improve and consequently opimise the basis for design of offshore wind turbines. This is done through 1) mapping the wind, wave ice and current as well as correlations of these, and 2) by clarifyring how these external conditions transform into loads. A comprehensive effort has been made to get a thorough understanding of the uncertainties that govern the reliability of wind turbines with respect to wind and wave loading. One of the conclusions is that the reliability of wind turbines is generally lower, than the average reliability of building structures that are subject not only to environmental loads, which are very uncertain, but also imposed loads and self weight, which are less uncertain than the environmental loads. The implication is that, at the moment lower load partial safety factors for onshore wind turbines cannot be recommended. For the combination of wind and wave design loads the problem is twofold: 1). A very conservative design will be generated by simply adding the individual wind and wave design loads disregarding the independence of the short-term fluctuations of wind and wave loads. 2). Characteristic values and partial safety factors for wind and wave loads are not defined similarly. This implies that the reliability levels of turbine support structures subject to purely aerodynamic loads and subject to purely hydrodynamic loads are not identical. For the problem of combining aerodynamic design loads and hydrodynamic design loads two results have been obtained in the project: 1). By simple means a site specific wave load safety factor rendering the same safety level for hydrodynamic loads as for aerodynamic loads is derived, and next, by direct square summation of extreme fluctuations, the wind and wave load safety factors are weighted. 2). Under the assumptions that a deep water site is considered and that the wave loading is a fifty-fifty mix of drag and inertia the same wind and wave load safety factor

  11. Load Induced Blindness

    Science.gov (United States)

    Macdonald, James S. P.; Lavie, Nilli

    2008-01-01

    Although the perceptual load theory of attention has stimulated a great deal of research, evidence for the role of perceptual load in determining perception has typically relied on indirect measures that infer perception from distractor effects on reaction times or neural activity (see N. Lavie, 2005, for a review). Here we varied the level of…

  12. Indentation load relaxation test

    Energy Technology Data Exchange (ETDEWEB)

    Hannula, S.P.; Stone, D.; Li, C.Y. (Cornell Univ., Ithaca, NY (USA))

    Most of the models that are used to describe the nonelastic behavior of materials utilize stress-strain rate relations which can be obtained by a load relaxation test. The conventional load relaxation test, however, cannot be performed if the volume of the material to be tested is very small. For such applications the indentation type of test offers an attractive means of obtaining data necessary for materials characterization. In this work the feasibility of the indentation load relaxation test is studied. Experimental techniques are described together with results on Al, Cu and 316 SS. These results are compared to those of conventional uniaxial load relaxation tests, and the conversion of the load-indentation rate data into the stress-strain rate data is discussed.

  13. Nuclear factor κB mediated plasma five poly element function 3 and CRP pathway in patients with hypertension in pregnancy%妊高症患者血液中核因子κB介导的 PTX3和 CRP的表达及意义

    Institute of Scientific and Technical Information of China (English)

    夏芬

    2015-01-01

    Objective To investigate the nuclear factor κB mediated plasma five poly 3(PTX3)- reactive protein(CRP)pathways in patients with hypertension in pregnancy. Methods Sixty cases of patients with hypertensive disorder complicating pregnancy who were admitted in our hospital from March 2012 to December 2014 were selected as the observation group,in which 20 cases had pregnancy induced hypertension, [BP (131. 2 ±17. 4)/(79. 7 ±10. 0)mmHg],20 cases had mild preeclampsia [BP(141. 2 ±15. 6)/(89. 5 ±11. 2)mmHg],and 20 cases had severe preeclampsia [BP(150. 3 ± 17. 6)/(97. 6 ± 14. 8)mmHg]. Another 20 cases of normal late pregnant women with the same admission were selected as the control group,then the automatic biochemical analyzer was used to detect the peripheral mononuclear cells of plasma five poly3 and CRP level,and Western blot was used in detection of the level of NF-κB. Then NF-κB inhibitor was added,PTX3 and CRP level was observed,and at the same time its relation with blood pressure fluctuation was observed. Results PTX3 and CRP in the observation group were increased with the rise of blood pressure,which were significantly higher than those of the control,and the difference within groups and between groups had statistically significant difference. After addition of PTDC,the two indexes were reduced,down to the level of control group,and compared with II degrees and Ⅲ degrees,the difference was statistically significant. NF-κB level increased with elevated blood pressure. Con-clusion Plasma five poly 3 and C reactive protein is a downstream factor nuclear factor kB expression,elevated in patients with hypertension of pregnancy,and the channel may be used as a potential target for the treatment of pregnancy induced hypertension with drugs.%目的:研究核因子(NF)κB介导的 PTX3和 CRP通路,是否可作为治疗妊高症的潜在靶点并分析其临床意义。方法选取2012年3月至2014年12月收治的妊高症患者(NH BPEP

  14. Replacing heme with paclitaxel to prepare drug-loaded globin nanoassembles for CD163 targeting.

    Science.gov (United States)

    Meng, Zhengjie; Yang, Xiaoyan; Hu, Die; Wang, Kaikai; Zhi, Feng; Chen, Xi; Gong, Guangming; Wu, Jinhui; Hu, Yiqiao

    2015-03-01

    Protein-based nanoparticles hold great promises in both preclinical and clinical practices, such as oncology diagnosis and treatment, because of their high biocompatibility and biodegradability. However, the complicated preparation and lack of targeting specific cells or tissues may limit their further uses. To overcome these limitations, we developed a novel replacing method for preparing dual-functional protein nanocarrier, such that one function is capable of encapsulating small molecule into protein, whereas the other function is cable of recognizing CD163 receptor [hemoglobin (Hb) scavenger receptor]. In this study, Hb was chosen as the targeting drug carrier. First, the heme group in the Hb was removed and replaced by paclitaxel (PTX) to form nanoparticles (Gb-NPs-PTX). The resulted Gb-NPs-PTX showed spherical shape and their diameter could be controlled in the range of 120-160 nm by altering the ratio of PTX to Hb. The binding activity of Gb-NPs-PTX to CD163 was confirmed by cell uptake in CD163(+) Chinese hamster ovary cells. Results in vivo also showed a CD163-dependent tissue accumulation of Gb-NPs-PTX in mice. In summary, by using the novel replacing method, PTX could be easily encapsulated into Hb nanoparticles and the targeting effects of Hb could also be kept. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.

  15. Load Balancing Scientific Applications

    Energy Technology Data Exchange (ETDEWEB)

    Pearce, Olga Tkachyshyn [Texas A & M Univ., College Station, TX (United States)

    2014-12-01

    The largest supercomputers have millions of independent processors, and concurrency levels are rapidly increasing. For ideal efficiency, developers of the simulations that run on these machines must ensure that computational work is evenly balanced among processors. Assigning work evenly is challenging because many large modern parallel codes simulate behavior of physical systems that evolve over time, and their workloads change over time. Furthermore, the cost of imbalanced load increases with scale because most large-scale scientific simulations today use a Single Program Multiple Data (SPMD) parallel programming model, and an increasing number of processors will wait for the slowest one at the synchronization points. To address load imbalance, many large-scale parallel applications use dynamic load balance algorithms to redistribute work evenly. The research objective of this dissertation is to develop methods to decide when and how to load balance the application, and to balance it effectively and affordably. We measure and evaluate the computational load of the application, and develop strategies to decide when and how to correct the imbalance. Depending on the simulation, a fast, local load balance algorithm may be suitable, or a more sophisticated and expensive algorithm may be required. We developed a model for comparison of load balance algorithms for a specific state of the simulation that enables the selection of a balancing algorithm that will minimize overall runtime.

  16. Lumbriculus variegatus loading study

    Data.gov (United States)

    U.S. Environmental Protection Agency — Results from sediment bioaccumulation tests with Lumbriculus variegatus with evaluating the effects of organism loading density. This dataset is associated with the...

  17. Carbohydrate-Loading Diet

    Science.gov (United States)

    ... Grape juice (12 ounces) 55 225 Lunch Milk, chocolate, reduced fat (12 ounces) 45 285 4 slices ... of carb-loading for sports performance. Academy of Nutrition and Dietetics. http://www.eatright.org/resource/fitness/ ...

  18. LOADING SIMULATION PROGRAM C

    Data.gov (United States)

    U.S. Environmental Protection Agency — LSPC is the Loading Simulation Program in C++, a watershed modeling system that includes streamlined Hydrologic Simulation Program Fortran (HSPF) algorithms for...

  19. Cognitive load theory

    NARCIS (Netherlands)

    Kirschner, Paul A.; Kirschner, Femke; Paas, Fred

    2010-01-01

    Kirschner, P. A., Kirschner, F. C., & Paas, F. (2009). Cognitive load theory. In E. M. Anderman & L. H. Anderman (Eds.). Psychology of classroom learning: An encyclopedia, Volume 1, a-j (pp. 205-209). Detroit, MI: Macmillan Reference.

  20. Static Loads Test Facility

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Provides the capability to perform large-scale structural loads testing on spacecraft and other structures. Results from these tests can be used to verify...

  1. Plug Load Data

    Data.gov (United States)

    National Aeronautics and Space Administration — We provide MATLAB binary files (.mat) and comma separated values files of data collected from a pilot study of a plug load management system that allows for the...

  2. TE(01) High Power Disk Loaded Guide Load

    CERN Document Server

    Farkas, Zoltan D

    2005-01-01

    A method to design a matching section from a smooth guide to a disk loaded guide, using a variation of broadband matching* is described. Using this method, we show how to design high power loads, filters and attenuators. The load consists of a disk loaded coaxial guide, operating in the T01

  3. E-2C Loads Calibration in DFRC Flight Loads Lab

    Science.gov (United States)

    Schuster, Lawrence S.

    2008-01-01

    Objectives: a) Safely and efficiently perform structural load tests on NAVAIR E-2C aircraft to calibrate strain gage instrumentation installed by NAVAIR; b) Collect load test data and derive loads equations for use in NAVAIR flight tests; and c) Assist flight test team with use of loads equations measurements at PAX River.

  4. Dielectrically Loaded Biconical Antennas

    Science.gov (United States)

    Nusseibeh, Fouad Ahmed

    1995-01-01

    Biconical antennas are of great interest to those who deal with broadband applications including the transmission/reception of pulses. In particular, wide-angle conical antennas are an attractive choice in many applications including Electronic Support Measures (ESM) and the measurements of transient surface currents and charge densities on aircraft. Dielectric loading in the interior region of a conical antenna can be used to reduce the size of the antenna especially at low frequencies and/or for structural strength. Therefore, having an analytical solution for the input impedance and the frequency response is very helpful in optimizing the design and understanding the behavior of the antenna. From the quasi-analytical solution for the input impedance and the electric field of a wide-angle conical antenna, it can be seen that the dielectric loading in the antenna region improves the input impedance at low frequencies, but increases the number of resonance points and the magnitude of these peaks. When an inhomogeneous dielectric load is used, the magnitude of the resonance peaks is decreased (depending on the way the load is distributed), improving the input impedance of the antenna significantly. Introducing a dielectric load in the interior region of an electrically short receiving cone makes the antenna behave as an electrically longer antenna. However, this is not true for the case for electrical1y long antennas. For the case of pulse transmission, the dielectric load affects only the amplitude. Of course, if the dielectric fills the whole space, both transmitting and receiving antennas behave as electrically longer antennas.

  5. Laterally loaded masonry

    DEFF Research Database (Denmark)

    Raun Gottfredsen, F.

    In this thesis results from experiments on mortar joints and masonry as well as methods of calculation of strength and deformation of laterally loaded masonry are presented. The strength and deformation capacity of mortar joints have been determined from experiments involving a constant compressive...... stress and increasing shear. The results show a transition to pure friction as the cohesion is gradually destroyed. An interface model of a mortar joint that can take into account this aspect has been developed. Laterally loaded masonry panels have also been tested and it is found to be characteristic...

  6. Wave Loads on Cylinders

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Frigaard, Peter

    1989-01-01

    Wave loads may be defined as time varying forces on a body resulting from the wave induced flow fields which surrounds the body in whole or in part. Such unsteady fluid forces are the net result of pressure and shear forces integrated over the instantaneous wetted area.......Wave loads may be defined as time varying forces on a body resulting from the wave induced flow fields which surrounds the body in whole or in part. Such unsteady fluid forces are the net result of pressure and shear forces integrated over the instantaneous wetted area....

  7. Load research and load estimation in electricity distribution

    Energy Technology Data Exchange (ETDEWEB)

    Seppaelae, A. [VTT Energy, Espoo (Finland). Energy Systems

    1996-12-31

    The topics introduced in this thesis are: the Finnish load research project, a simple form customer class load model, analysis of the origins of customers load distribution, a method for the estimation of the confidence interval of customer loads and Distribution Load Estimation (DLE) which utilises both the load models and measurements from distribution networks. The Finnish load research project started in 1983. The project was initially coordinated by the Association of Finnish Electric Utilities and 40 utilities joined the project. Now there are over 1000 customer hourly load recordings in a database. A simple form customer class load model is introduced. The model is designed to be practical for most utility applications and has been used by the Finnish utilities for several years. The only variable of the model is the customers annual energy consumption. The model gives the customers average hourly load and standard deviation for a selected month, day and hour. The statistical distribution of customer loads is studied and a model for customer electric load variation is developed. The model results in a lognormal distribution as an extreme case. Using the `simple form load model`, a method for estimating confidence intervals (confidence limits) of customer hourly load is developed. The two methods selected for final analysis are based on normal and lognormal distribution estimated in a simplified manner. The estimation of several cumulated customer class loads is also analysed. Customer class load estimation which combines the information from load models and distribution network load measurements is developed. This method, called Distribution Load Estimation (DLE), utilises information already available in the utilities databases and is thus easy to apply

  8. Probabilistic Load Flow

    DEFF Research Database (Denmark)

    Chen, Peiyuan; Chen, Zhe; Bak-Jensen, Birgitte

    2008-01-01

    This paper reviews the development of the probabilistic load flow (PLF) techniques. Applications of the PLF techniques in different areas of power system steady-state analysis are also discussed. The purpose of the review is to identify different available PLF techniques and their corresponding...

  9. Targeting bortezomib-induced aggresome formation using vinorelbine enhances the cytotoxic effect along with ER stress loading in breast cancer cell lines

    Science.gov (United States)

    Miyahara, Kana; Kazama, Hiromi; Kokuba, Hiroko; Komatsu, Seiichiro; Hirota, Ayako; Takemura, Jun; Hirasawa, Kazuhiro; Moriya, Shota; Abe, Akihisa; Hiramoto, Masaki; Ishikawa, Takashi; Miyazawa, Keisuke

    2016-01-01

    The ubiquitin-proteasome and autophagy-lysosome pathways are two major self-digestive systems for cellular proteins. Ubiquitinated misfolded proteins are degraded mostly by proteasome. However, when ubiquitinated proteins accumulate beyond the capacity of proteasome clearance, they are transported to the microtubule-organizing center (MTOC) along the microtubules to form aggresomes, and subsequently some of them are degraded by the autophagy-lysosome system. We previously reported that macrolide antibiotics such as azithromycin and clarithromycin block autophagy flux, and that concomitant treatment with the proteasome inhibitor bortezomib (BZ) and macrolide enhances endoplasmic reticulum (ER) stress-mediated apoptosis in breast cancer cells. As ubiquitinated proteins are concentrated at the aggresome upon proteasome failure, we focused on the microtubule as the scaffold of this transport pathway for aggresome formation. Treatment of metastatic breast cancer cell lines (e.g., MDA-MB-231 cells) with BZ resulted in induction of aggresomes, which immunocytochemistry detected as a distinctive eyeball-shaped vimentin-positive inclusion body that formed in a perinuclear lesion, and that electron microscopy detected as a sphere of fibrous structure with some dense amorphous deposit. Vinorelbine (VNR), which inhibits microtubule polymerization, more effectively suppressed BZ-induced aggresome formation than paclitaxel (PTX), which stabilizes microtubules. Combined treatment using BZ and VNR, but not PTX, enhanced the cytotoxic effect and apoptosis induction along with pronounced ER stress loading such as upregulation of GRP78 and CHOP/GADD153. The addition of azithromycin to block autophagy flux in the BZ plus VNR-containing cell culture further enhanced the cytotoxicity. These data suggest that suppression of BZ-induced aggresome formation using an inhibitory drug such as VNR for microtubule polymerization is a novel strategy for meta-static breast cancer therapy. PMID

  10. daily nigerian nigerian nigerian peak load forec peak load forec ...

    African Journals Online (AJOL)

    User

    is generally needed for control and scheduling power system and also as inputs to load flo analysis .... Figure 1 Seasonal indices computing neural network ... Feedback paths are sometimes used. In applying a neural network to electric load ...

  11. Load flow analysis using decoupled fuzzy load flow under critical ...

    African Journals Online (AJOL)

    user

    of power system, reliable fuzzy load flow is developed to overcome the limitations of the ... of power mismatches are taken as two inputs for fuzzy logic controller. ..... Programming Based Load Flow Algorithm For Systems Containing Unified ...

  12. Ultrasound-mediated tumor imaging and nanotherapy using drug loaded, block copolymer stabilized perfluorocarbon nanoemulsions.

    Science.gov (United States)

    Rapoport, Natalya; Nam, Kweon-Ho; Gupta, Roohi; Gao, Zhongao; Mohan, Praveena; Payne, Allison; Todd, Nick; Liu, Xin; Kim, Taeho; Shea, Jill; Scaife, Courtney; Parker, Dennis L; Jeong, Eun-Kee; Kennedy, Anne M

    2011-07-15

    Perfluorocarbon nanoemulsions can deliver lipophilic therapeutic agents to solid tumors and simultaneously provide for monitoring nanocarrier biodistribution via ultrasonography and/or (19)F MRI. In the first generation of block copolymer stabilized perfluorocarbon nanoemulsions, perfluoropentane (PFP) was used as the droplet forming compound. Although manifesting excellent therapeutic and ultrasound imaging properties, PFP nanoemulsions were unstable at storage, difficult to handle, and underwent hard to control phenomenon of irreversible droplet-to-bubble transition upon injection. To solve the above problems, perfluoro-15-crown-5-ether (PFCE) was used as a core forming compound in the second generation of block copolymer stabilized perfluorocarbon nanoemulsions. PFCE nanodroplets manifest both ultrasound and fluorine ((19)F) MR contrast properties, which allows using multimodal imaging and (19)F MR spectroscopy for monitoring nanodroplet pharmacokinetics and biodistribution. In the present paper, acoustic, imaging, and therapeutic properties of unloaded and paclitaxel (PTX) loaded PFCE nanoemulsions are reported. As manifested by the (19)F MR spectroscopy, PFCE nanodroplets are long circulating, with about 50% of the injected dose remaining in circulation 2h after the systemic injection. Sonication with 1-MHz therapeutic ultrasound triggered reversible droplet-to-bubble transition in PFCE nanoemulsions. Microbubbles formed by acoustic vaporization of nanodroplets underwent stable cavitation. The nanodroplet size (200nm to 350nm depending on a type of the shell and conditions of emulsification) as well as long residence in circulation favored their passive accumulation in tumor tissue that was confirmed by ultrasonography. In the breast and pancreatic cancer animal models, ultrasound-mediated therapy with paclitaxel-loaded PFCE nanoemulsions showed excellent therapeutic properties characterized by tumor regression and suppression of metastasis. Anticipated

  13. Nutrient and Coliform Loading (NCL)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This is a database of available fecal coliform bacteria, fecal streptococci bacteria, and nutrient loading data. Loading for contaminants other than fecal coliform...

  14. The International Mass Loading Service

    CERN Document Server

    Petrov, Leonid

    2015-01-01

    The International Mass Loading Service computes four loadings: a) atmospheric pressure loading; b) land water storage loading; c) oceanic tidal loading; and d) non-tidal oceanic loading. The service provides to users the mass loading time series in three forms: 1) pre-computed time series for a list of 849 space geodesy stations; 2) pre-computed time series on the global 1deg x 1deg grid; and 3) on-demand Internet service for a list of stations and a time range specified by the user. The loading displacements are provided for the time period from 1979.01.01 through present, updated on an hourly basis, and have latencies 8-20 hours.

  15. Android Fully Loaded

    CERN Document Server

    Huddleston, Rob

    2012-01-01

    Fully loaded with the latest tricks and tips on your new Android! Android smartphones are so hot, they're soaring past iPhones on the sales charts. And the second edition of this muscular little book is equally impressive--it's packed with tips and tricks for getting the very most out of your latest-generation Android device. Start Facebooking and tweeting with your Android mobile, scan barcodes to get pricing and product reviews, download your favorite TV shows--the book is positively bursting with practical and fun how-tos. Topics run the gamut from using speech recognition, location-based m

  16. Load Control System Reliability

    Energy Technology Data Exchange (ETDEWEB)

    Trudnowski, Daniel [Montana Tech of the Univ. of Montana, Butte, MT (United States)

    2015-04-03

    This report summarizes the results of the Load Control System Reliability project (DOE Award DE-FC26-06NT42750). The original grant was awarded to Montana Tech April 2006. Follow-on DOE awards and expansions to the project scope occurred August 2007, January 2009, April 2011, and April 2013. In addition to the DOE monies, the project also consisted of matching funds from the states of Montana and Wyoming. Project participants included Montana Tech; the University of Wyoming; Montana State University; NorthWestern Energy, Inc., and MSE. Research focused on two areas: real-time power-system load control methodologies; and, power-system measurement-based stability-assessment operation and control tools. The majority of effort was focused on area 2. Results from the research includes: development of fundamental power-system dynamic concepts, control schemes, and signal-processing algorithms; many papers (including two prize papers) in leading journals and conferences and leadership of IEEE activities; one patent; participation in major actual-system testing in the western North American power system; prototype power-system operation and control software installed and tested at three major North American control centers; and, the incubation of a new commercial-grade operation and control software tool. Work under this grant certainly supported the DOE-OE goals in the area of “Real Time Grid Reliability Management.”

  17. Load forecasting for supermarket refrigeration

    DEFF Research Database (Denmark)

    Bacher, Peder; Madsen, Henrik; Aalborg Nielsen, Henrik

    This report presents a study of models for forecasting the load for supermarket refrigeration. The data used for building the forecasting models consists of load measurements, local climate measurements and weather forecasts. The load measurements are from a supermarket located in a village...... in Denmark. The load for refrigeration is the sum of all cabinets in the supermarket, both low and medium temperature cabinets, and spans a period of one year. As input to the forecasting models the ambient temperature observed near the supermarket together with weather forecasts are used. Every hour...... the hourly load for refrigeration for the following 42 hours is forecasted. The forecast models are adaptive linear time-series models which are fitted with a computationally efficient recursive least squares scheme. The dynamic relations between the inputs and the load is modeled by simple transfer...

  18. Shear loading of costal cartilage

    CERN Document Server

    Subit, Damien

    2014-01-01

    A series of tests were performed on a single post-mortem human subject at various length scales. First, tabletop tests were performed. Next, the ribs and intercostal muscles were tested with the view to characterize the load transfer between the ribs. Finally, the costal cartilage was tested under shear loading, as it plays an important in the transfer of the load between the ribs and the sternum. This paper reports the results of dynamic shear loading tests performed on three samples of costal cartilage harvested from a single post-mortem human subject, as well as the quantification of the effective Young's modulus estimated from the amount of cartilage calcification.

  19. Metamaterial Loadings for Waveguide Miniaturization

    CERN Document Server

    Odabasi, H

    2013-01-01

    We show that a rectangular metallic waveguide loaded with metamaterial elements consisting of electric-field coupled (ELC) resonators placed at the side walls can operate well below the cutoff frequency of the respective unloaded waveguide. The dispersion diagrams indicate that propagating modes in ELC-loaded waveguides are of forward-type for both TE and TM modes. We also study the dispersion diagram and transmission characteristics of rectangular metallic waveguides simultaneously loaded with ELCs and split ring resonators (SRRs). Such doubly-loaded waveguides can support both forward wave and backward waves, and provide independent control of the propagation characteristics for the respective modes.

  20. Load forecasting of supermarket refrigeration

    DEFF Research Database (Denmark)

    Rasmussen, Lisa Buth; Bacher, Peder; Madsen, Henrik

    2016-01-01

    This paper presents a novel study of models for forecasting the electrical load for supermarket refrigeration. The data used for building the models consists of load measurements, local climate measurements and weather forecasts. The load measurements are from a supermarket located in a village...... in Denmark. Every hour the hourly electrical load for refrigeration is forecasted for the following 42 h. The forecast models are adaptive linear time series models. The model has two regimes; one for opening hours and one for closing hours, this is modeled by a regime switching model and two different...

  1. Load carriage by infantry soldiers

    Directory of Open Access Journals (Sweden)

    N. C. Majumdar

    1958-07-01

    Full Text Available At constant speed of marching, oxygen consumption has been found to increase linearly with the amount of load carried, indicating that there is no optimum load. However, an optimum speed of marching has been found, depending on the terrain condition. A different line of approach, involving a study of the relationship between stride-length, frequency of stepping and speed in normal walking and the effect of muscular fatigue on this relationship has also yielded similar results. Desirability of further studies on the effect of load on optimum speed of marching, effective reduction of weight of equipment and optimum distribution of load on the body has been stressed.

  2. Demand Response Load Following of Source and Load Systems

    DEFF Research Database (Denmark)

    Hu, Jianqiang; Cao, Jinde; Yong, Taiyou

    2017-01-01

    capacities and regulation rates of aggregators. Based on the evaluation results, the dispatch center optimizes the real time load following trajectories for the generating units and the flexible load agents via look-ahead optimization by considering the injection of renewable power. Furthermore, we mainly...

  3. TE_01 High Power Disk Loaded Guide Load

    Energy Technology Data Exchange (ETDEWEB)

    Farkas, Z.D.; /SLAC

    2005-06-01

    A method to design a matching section from a smooth guide to a disk-loaded guide, using a variation of broadband matching, [1, 2] is described. Using this method, we show how to design high power loads, attenuators and filters. The load consists of a disk-loaded coaxial guide operating in the TE{sub 01}-mode. We use this mode because it has no electric field terminating on a conductor, has no axial currents, and has no current at the cylinder-disk interface. A high power load design that has -35 dB reflection and a 200 MHz, -20 dB bandwidth, is presented. It is expected that it will carry the 600 MW output peak power of the pulse compression network. We use coaxial geometry and stainless steel material to increase the attenuation per cell.

  4. Immediate Versus Early Loading and Conventional Loading in Implant Dentistry

    Directory of Open Access Journals (Sweden)

    Hassan Maghaireh

    2013-12-01

    Full Text Available To minimize the risk of implant failures after their placement, dental implants are traditionally kept load-free for 3 to 8 months to establish osseointegration before connecting the prosthetic super-structure (conventional loading. However, implant dentists are under continuous pressure from the media and patients to speed up the treatment and reduce number of visits during the implant therapy. Immediate implant loading can also reduce the cost and might also improve aesthetics as claimed by some surgeons. This pressure from the media, patients and dentists was behind introducing changes into the loading protocols and nowadays implants are loaded early and even immediately and it would be useful to know whether there is a difference in success rates between immediately and early loaded implants compared with conventionally loaded implants. It is well known that whenever a clinician is faced with a clinical question, the answer(s should be evidence based to avoid the risk of bias as opinion based answers can be misleading and can cause more failures in the dental practice. This mini-review aims to evaluate the effects of (1 immediate (within 1 week, (2 early (between 1 week and 2 months, and (3 conventional (after 2 months loading of osseointegrated dental implants. The review found no evidence that attaching artificial teeth either immediately, after 6 weeks (early or after at least 3 months (conventional led to any important differences in the failure of the implant or the artificial tooth, or to the amount of bone which surrounded the implant (any bone loss would be an undesirable consequence. However, we found a trend of more failures and complications with early loading when compared to immediate or conventional loading. More research is needed in this area. - See more at: http://smiledentaljournal.com/article.php?id=59#sthash.mniQLIcf.dpuf

  5. Optimal load shedding and restoration

    Science.gov (United States)

    Xu, Ding

    Load shedding is an emergency control action in power systems that can save systems from a wide-area blackout. Underfrequency load shedding, steady state load shedding, and voltage load shedding are widely used in power systems. These methods utilize either the steady state model or a simplified dynamic model to represent a power systems. In this dissertation, a general optimal load shedding method that considers both the dynamic process and load distribution is proposed. The unfavorable load shedding is then formulated as an optimization problem with the objective function of cost minimization. This objective function is subjected to system, security, and operation constraints. The entire problem becomes a question of optimization with differential and nonlinear equations as constraints. To solve this problem, discretization is used to change the differential equations into algebraic equations. The original problem is thus reformulated as an optimization problem and can be solved by a standard mathematical program. The general idea is then applied to traditional power systems, deregulated power systems, power systems with distributed generation, and load restoration. In the traditional power system, the method shows that governor action, generation dynamic, disturbance location, and economic factors can be taken into consideration. In the deregulated power system, two power market models are developed and incorporated into the load shedding scheme. In power systems with multiple distributed generations, the different cases of disturbances are analyzed and models of different distributed generation developed. The general idea is then applied. Finally, the load restoration problem is studied, and it is proposed that an optimization method be applied to it. This dissertation provides a comprehensive solution for load shedding problem in power systems. The models developed in this research can also be used to study other power system problems.

  6. Load identification during object handling

    NARCIS (Netherlands)

    Kortier, H.G.; Veltink, P.H.

    2011-01-01

    In this paper a new concept to identify environ- mental loads during the interaction with the human body by sensing interface forces and movement is proposed. Mass and spring loads were moved by hand over a fixed height difference. Kinematic and kinetic quantities were measured between the hand and

  7. Loading Conditions and Longitudinal Strength

    DEFF Research Database (Denmark)

    Sørensen, Herman

    1995-01-01

    Methods for the calculation of the lightweight of the ship.Loading conditions satisfying draught, trim and intact stability requirements and analysis of the corresponding stillwater longitudinal strength.......Methods for the calculation of the lightweight of the ship.Loading conditions satisfying draught, trim and intact stability requirements and analysis of the corresponding stillwater longitudinal strength....

  8. Loading Conditions and Longitudinal Strength

    DEFF Research Database (Denmark)

    Sørensen, Herman

    1995-01-01

    Methods for the calculation of the lightweight of the ship.Loading conditions satisfying draught, trim and intact stability requirements and analysis of the corresponding stillwater longitudinal strength.......Methods for the calculation of the lightweight of the ship.Loading conditions satisfying draught, trim and intact stability requirements and analysis of the corresponding stillwater longitudinal strength....

  9. LOAD MANAGEMENT IN CLOUD ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Esha Sarkar

    2014-09-01

    Full Text Available Cloud computing is an on demand service in which shared resources, information, software and other devices are provided to the end user as per their requirement at a specific time. A cloud consists of several elements such as clients, datacenters and distributed servers. There are n number of clients and end users involved in cloud environment. These clients may make requests to the cloud system simultaneously, making it difficult for the cloud to manage the entire load at a time. The load can be CPU load, memory load, delay or network load. This might cause inconvenience to the clients as there may be delay in the response time or it might affect the performance and efficiency of the cloud environment. So, the concept of load balancing is very important in cloud computing to improve the efficiency of the cloud. Good load balancing makes cloud computing more efficient and improves user satisfaction. This paper gives an approach to balance the incoming load in cloud environment by making partitions of the public cloud

  10. Umbilical Cable Recovery Load Analysis

    Institute of Scientific and Technical Information of China (English)

    YAN Shu-wang; JIA Zhao-lin; FENG Xiao-wei; LI Shi-tao

    2013-01-01

    Umbilical cable is a kind of integrated subsea cable widely used in the exploration and exploitation of oil and gas field.The severe ocean environment makes great challenges to umbilical maintenance and repair work.Damaged umbilical is usually recovered for the regular operation of the offshore production system.Analysis on cables in essence is a two-point boundary problem.The tension load at the mudline must be known first,and then the recovery load and recovery angle on the vessel can be solved by use of catenary equation.The recovery analysis also involves umbilicalsoil interaction and becomes more complicated.Calculation methods for recovery load of the exposed and buried umbilical are established and the relationship between the position of touch down point and the recovery load as well as the recovery angle and recovery load are analyzed.The analysis results provide a theoretical reference for offshore on-deck operation.

  11. Umbilical cable recovery load analysis

    Science.gov (United States)

    Yan, Shu-wang; Jia, Zhao-lin; Feng, Xiao-wei; Li, Shi-tao

    2013-06-01

    Umbilical cable is a kind of integrated subsea cable widely used in the exploration and exploitation of oil and gas field. The severe ocean environment makes great challenges to umbilical maintenance and repair work. Damaged umbilical is usually recovered for the regular operation of the offshore production system. Analysis on cables in essence is a two-point boundary problem. The tension load at the mudline must be known first, and then the recovery load and recovery angle on the vessel can be solved by use of catenary equation. The recovery analysis also involves umbilical-soil interaction and becomes more complicated. Calculation methods for recovery load of the exposed and buried umbilical are established and the relationship between the position of touch down point and the recovery load as well as the recovery angle and recovery load are analyzed. The analysis results provide a theoretical reference for offshore on-deck operation.

  12. Wind load reduction for heliostats

    Energy Technology Data Exchange (ETDEWEB)

    Peterka, J.A.; Hosoya, N.; Bienkiewicz, B.; Cermak, J.E.

    1986-05-01

    This report presents the results of wind-tunnel tests supported through the Solar Energy Research Institute (SERI) by the Office of Solar Thermal Technology of the US Department of Energy as part of the SERI research effort on innovative concentrators. As gravity loads on drive mechanisms are reduced through stretched-membrane technology, the wind-load contribution of the required drive capacity increases in percentage. Reduction of wind loads can provide economy in support structure and heliostat drive. Wind-tunnel tests have been directed at finding methods to reduce wind loads on heliostats. The tests investigated primarily the mean forces, moments, and the possibility of measuring fluctuating forces in anticipation of reducing those forces. A significant increase in ability to predict heliostat wind loads and their reduction within a heliostat field was achieved.

  13. Iron arsenides with three-dimensional FeAs layer networks: Can(n+1)/2(Fe1-xPtx)(2+3n)Ptn(n-1)/2As(n+1)(n+2)/2 (n=2, 3)

    Energy Technology Data Exchange (ETDEWEB)

    Katayama, Naoyuki; Onari, Seiichiro; Matsubayashi, Kazuyuki; Uwatoko, Yoshiya; Sawa, Hiroshi

    2016-12-20

    We report the comprehensive studies between synchrotron X-ray diffraction, electrical resistivity and magnetic susceptibility experiments for the iron arsenides Can(n+1)/2(Fe1-xPtx)(2+3n)Ptn(n -1)/2As(n+1)(n+2)/2 for n=2 and 3. Both structures crystallize in the monoclinic space group P21/m (#11) with three-dimensional FeAs structures. The horizontal FeAs layers are bridged by inclined FeAs planes through edge-sharing FeAs5 square pyramids, resulting in triangular tunneling structures rather than the simple layered structures found in conventional iron arsenides. n=3 system shows a sign of superconductivity with a small volume fraction. Our first-principles calculations of these systems clearly indicate that the Fermi surfaces originate from strong Fe-3d characters and the three-dimensional nature of the electric structures for both systems, thus offering the playgrounds to study the effects of dimensionality on high Tc superconductivity.

  14. Quasi monolithic silicon load cell for loads up to 1000 kg with insensitivity to non-homogeneous load distributions

    NARCIS (Netherlands)

    Wiegerink, Remco; Zwijze, Robert; Krijnen, Gijs; Lammerink, Theo; Elwenspoek, Miko

    2000-01-01

    In this paper, a micromachined silicon load cell (force sensor) is presented for measuring loads up to 1000 kg. The sensitive surface of 1 cm2 contains a matrix of capacitive sensing elements to make the load cell insensitive to non-homogeneous load distributions. The load cell has been realized and

  15. Metronomic paclitaxel-loaded mPEG-PLA nanoparticles show enhanced anti-tumor efficacy compared to maximum tolerated dose administration

    Science.gov (United States)

    Fei, Tan; Yang, Lian-juan; Mo, Xiao-hui; Wang, Xiu-li; Jun, Gu

    2014-11-01

    Low-dose metronomic (LDM) chemotherapy with cytotoxic agents, aimed at disrupting tumor endothelial cells, is an alternative method to maximum tolerated dose chemotherapy targeting proliferating tumor cells in clinical practice. However, even in the LDM schedule, cytotoxic agents still exhibit serious side effects due to non-distribution and high accumulated doses in the body. Nanocarriers can maximize the efficacy of the encapsulated drug by adjusting the pharmacokinetics and bio-distribution pattern, and minimize excessive toxic side effects. In the present study, we prepared polyethylene glycol (PEG)-coated stealth nanoparticles containing paclitaxel (PTX-NP) in order to evaluate their accumulation in tumor and their anti-tumor activity following LDM administration. PTX-NPs were prepared by a modified emulsification/solvent diffusion method with methoxy PEG-poly(lactide). The in vitro viability, migration, and tube formation of primary human umbilical vein endothelial cells, in addition to thrombospondin-1 positive expression and microvessel density in vivo, confirmed the anti-angiogenic activity of PTX-NP. The cellular uptake and retention study, in addition to pharmacokinetics in Sprague-Dawley rats demonstrated sustained circulation of PTX-NP. The in vivo tumor accumulation of PTX-NP was monitored using the Xenogen IVIS 200 non-invasive optical imaging system. The anti-tumor activity of LDM PTX-NP was studied in B16 melanoma cancer-bearing mice in vivo. In conclusion, PTX-NP improved tumor accumulation and anti-tumor efficacy following LDM administration.

  16. The Atlas load protection switch

    CERN Document Server

    Davis, H A; Dorr, G; Martínez, M; Gribble, R F; Nielsen, K E; Pierce, D; Parsons, W M

    1999-01-01

    Atlas is a high-energy pulsed-power facility under development to study materials properties and hydrodynamics experiments under extreme conditions. Atlas will implode heavy liner loads (m~45 gm) with a peak current of 27-32 MA delivered in 4 mu s, and is energized by 96, 240 kV Marx generators storing a total of 23 MJ. A key design requirement for Atlas is obtaining useful data for 95601130f all loads installed on the machine. Materials response calculations show current from a prefire can damage the load requiring expensive and time consuming replacement. Therefore, we have incorporated a set of fast-acting mechanical switches in the Atlas design to reduce the probability of a prefire damaging the load. These switches, referred to as the load protection switches, short the load through a very low inductance path during system charge. Once the capacitors have reached full charge, the switches open on a time scale short compared to the bank charge time, allowing current to flow to the load when the trigger pu...

  17. Immediate loading of dental implants.

    Science.gov (United States)

    Henry, P J; Liddelow, G J

    2008-06-01

    The purpose of this review is to explore the concept of immediate loading as it pertains to dental implants and the indications for clinical practice. The definition of immediate loading will be considered together with a review of the relevant literature in an attempt to provide evidence-based guidelines for successful implementation into practice. A search of electronic databases including Medline, PubMed and the Cochrane Database of Systematic Reviews was undertaken using the terms "immediate loading'', "dental implants'', "immediate function'', "early loading'', "oral implants'', "immediate restoration'' and "systematic review''. This was supplemented by handsearching in peer-reviewed journals and cross-referenced with the articles accessed. Emphasis was given to systematic reviews and controlled clinical trials. A definition of immediate loading was suggested pertinent to the realities of logistics in clinical practice with respect to application and time frame. The literature was evaluated and shown to be limited with significant shortcomings. Guidelines and recommendations for clinical protocols were suggested and illustrated by examples of case types with a minimum of 1-3 years follow-up. A list of additional references for further reading was provided. Within the limitations of this review, there is evidence to suggest that immediate loading protocols have demonstrated high implant survival rates and may be cautiously recommended for certain clinical situations. However, more high level evidence studies, preferably randomized controlled trials (RCTs), over a long time frame are required to show a clear benefit over more conventional loading protocols.

  18. Load Estimation from Modal Parameters

    DEFF Research Database (Denmark)

    Aenlle, Manuel López; Brincker, Rune; Fernández, Pelayo Fernández;

    2007-01-01

    In Natural Input Modal Analysis the modal parameters are estimated just from the responses while the loading is not recorded. However, engineers are sometimes interested in knowing some features of the loading acting on a structure. In this paper, a procedure to determine the loading from a FRF...... matrix assembled from modal parameters and the experimental responses recorded using standard sensors, is presented. The method implies the inversion of the FRF which, in general, is not full rank matrix due to the truncation of the modal space. Furthermore, some ecommendations are included to improve...

  19. Power Load Management as a Computational Market

    NARCIS (Netherlands)

    Ygge, Fredrik; Akkermans, Hans; Akkermans, J.M.

    1997-01-01

    Power load management enables energy utilities to reduce peak loads and thereby save money. Due to the large number of different loads, power load management is a complicated optimization problem. We present a new decentralized approach to this problem by modeling direct load management as a

  20. Probabilistic Meteorological Characterization for Turbine Loads

    DEFF Research Database (Denmark)

    Kelly, Mark C.; Larsen, Gunner Chr.; Dimitrov, Nikolay Krasimirov;

    2014-01-01

    Beyond the existing, limited IEC prescription to describe fatigue loads on wind turbines, we look towards probabilistic characterization of the loads via analogous characterization of the atmospheric flow, particularly for today's "taller" turbines with rotors well above the atmospheric surface....... These are used as input to loads calculation, and with a statistical loads output description, they allow for improved design and loads calculations....

  1. Power Load Management as a Computational Market

    NARCIS (Netherlands)

    Ygge, F.; Akkermans, J.M.

    1996-01-01

    Power load management enables energy utilities to reduce peak loads and thereby save money. Due to the large number of different loads, power load management is a complicated optimization problem. We present a new decentralized approach to this problem by modeling direct load management as a computa

  2. Power Load Management as a Computational Market

    NARCIS (Netherlands)

    Ygge, Fredrik; Akkermans, Hans

    1997-01-01

    Power load management enables energy utilities to reduce peak loads and thereby save money. Due to the large number of different loads, power load management is a complicated optimization problem. We present a new decentralized approach to this problem by modeling direct load management as a computa

  3. Essentials of filoviral load quantification.

    Science.gov (United States)

    Cnops, Lieselotte; van Griensven, Johan; Honko, Anna N; Bausch, Daniel G; Sprecher, Armand; Hill, Charles E; Colebunders, Robert; Johnson, Joshua C; Griffiths, Anthony; Palacios, Gustavo F; Kraft, Colleen S; Kobinger, Gary; Hewlett, Angela; Norwood, David A; Sabeti, Pardis; Jahrling, Peter B; Formenty, Pierre; Kuhn, Jens H; Ariën, Kevin K

    2016-07-01

    Quantitative measurement of viral load is an important parameter in the management of filovirus disease outbreaks because viral load correlates with severity of disease, survival, and infectivity. During the ongoing Ebola virus disease outbreak in parts of Western Africa, most assays used in the detection of Ebola virus disease by more than 44 diagnostic laboratories yielded qualitative results. Regulatory hurdles involved in validating quantitative assays and the urgent need for a rapid Ebola virus disease diagnosis precluded development of validated quantitative assays during the outbreak. Because of sparse quantitative data obtained from these outbreaks, opportunities for study of correlations between patient outcome, changes in viral load during the course of an outbreak, disease course in asymptomatic individuals, and the potential for virus transmission between infected patients and contacts have been limited. We strongly urge the continued development of quantitative viral load assays to carefully evaluate these parameters in future outbreaks of filovirus disease.

  4. Internet Load and Traffic Balancing

    Institute of Scientific and Technical Information of China (English)

    李文正; 郭巧; 郭为民

    2005-01-01

    Load and traffic balancing for the Internet are analyzed. An intelligent domain name system(DNS) policy for the control and management of content distribution networks (CDN) is presented. An CDNs network based Urtitech IntelliDNS is built, and performance of the network in realizing traffic and load balancing is measured. It is proved that CDNs provide a valuable service and the methods are feasible.

  5. Wind Structure and Wind Loading

    DEFF Research Database (Denmark)

    Brorsen, Michael

    The purpose of this note is to provide a short description of wind, i.e. of the flow in the atmosphere of the Earth and the loading caused by wind on structures. The description comprises: causes to the generation of windhe interaction between wind and the surface of the Earthhe stochastic nature...... of windhe interaction between wind and structures, where it is shown that wind loading depends strongly on this interaction...

  6. Environmental Aspects of Load Management

    Energy Technology Data Exchange (ETDEWEB)

    Abaravicius, Juozas

    2004-02-01

    This study approaches load management from an environmental perspective. It identifies and discusses the possible environmental benefits of load management and evaluates their significance, primary focusing on CO{sub 2} emissions reduction. The analysis is carried out on two levels: national - the Swedish electricity market, and local - one electric utility in southern Sweden. Our results show the importance of considering the influence of site-specific or level-specific conditions on the environmental effects of load management. On the national level, load management measures can hardly provide significant environmental benefits, due to the high hydropower production in Sweden, which is the demand following production source. Emission reductions will rather be the result of energy efficiency measures, which will cut the load demand as well as the energy demand. However, when it comes to a local (utility) level, where load management is considered as an alternative to an installation of peak diesel power plant, the benefits are clear. It is demonstrated that significant CO{sub 2} emissions savings can be achieved due to avoided peak diesel power production.

  7. 46 CFR 169.689 - Demand loads.

    Science.gov (United States)

    2010-10-01

    ... Electrical Electrical Installations on Vessels of 100 Gross Tons and Over § 169.689 Demand loads. Demand loads must meet § 111.60-7 of this chapter except that smaller demand loads for motor feeders...

  8. [Structure of allostatic load in railway workers].

    Science.gov (United States)

    Gorokhova, S G; Pfaf, V F; Muraseyeva, E V; Akhsanova, E R; Prigorovskaya, T S; At'kov, O Yu

    2016-01-01

    The authors studied allostatic load in railway workers, as an indicator of stress effect. Analysis covered biomarkers that form allostatic load index, and their ratio for variable allostatic load index levels. Moderate allostatic load appeared to prevail in the examinees group. Findings are that systolic and diastolic blood pressure, general cholesterol and hemoglobin make major contribution into allostatic load index. Comparison covered models of allostatic load index calculation for variable biomarkers sets.

  9. Calibration set up for load cells

    Science.gov (United States)

    Rao, T. V. Govinda; Venkatesh, C. S.; Shivashankar, N.

    1989-05-01

    The planning, designing, fabrication, and calibration of 30, 50, and 100 ton tension load cells and 30 ton shear load cells are described. The tension load cells are for monitoring the force developed by earth moving vehicles and the shear load cells are for monitoring the load that tipplers unload form platform to ground. The shear load cells were incorporated into a rotary wagon tippler.

  10. The DEMO wall load challenge

    Science.gov (United States)

    Wenninger, R.; Albanese, R.; Ambrosino, R.; Arbeiter, F.; Aubert, J.; Bachmann, C.; Barbato, L.; Barrett, T.; Beckers, M.; Biel, W.; Boccaccini, L.; Carralero, D.; Coster, D.; Eich, T.; Fasoli, A.; Federici, G.; Firdaouss, M.; Graves, J.; Horacek, J.; Kovari, M.; Lanthaler, S.; Loschiavo, V.; Lowry, C.; Lux, H.; Maddaluno, G.; Maviglia, F.; Mitteau, R.; Neu, R.; Pfefferle, D.; Schmid, K.; Siccinio, M.; Sieglin, B.; Silva, C.; Snicker, A.; Subba, F.; Varje, J.; Zohm, H.

    2017-04-01

    For several reasons the challenge to keep the loads to the first wall within engineering limits is substantially higher in DEMO compared to ITER. Therefore the pre-conceptual design development for DEMO that is currently ongoing in Europe needs to be based on load estimates that are derived employing the most recent plasma edge physics knowledge. An initial assessment of the static wall heat load limit in DEMO infers that the steady state peak heat flux limit on the majority of the DEMO first wall should not be assumed to be higher than 1.0 MW m-2. This compares to an average wall heat load of 0.29 MW m-2 for the design {\\tt {EU}}{\\tt {~}}{\\tt {DEMO1}}{\\tt {~2015}} assuming a perfect homogeneous distribution. The main part of this publication concentrates on the development of first DEMO estimates for charged particle, radiation, fast particle (all static) and disruption heat loads. Employing an initial engineering wall design with clear optimization potential in combination with parameters for the flat-top phase (x-point configuration), loads up to 7 MW m-2 (penalty factor for tolerances etc not applied) have been calculated. Assuming a fraction of power radiated from the x-point region between 1/5 and 1/3, peaks of the total power flux density due to radiation of 0.6-0.8 MW m-2 are found in the outer baffle region. This first review of wall loads, and the associated limits in DEMO clearly underlines a significant challenge that necessitates substantial engineering efforts as well as a considerable consolidation of the associated physics basis.

  11. Ultimate loading of wind turbines

    DEFF Research Database (Denmark)

    Larsen, Gunner Chr.; Ronold, K.; Ejsing Jørgensen, Hans

    1999-01-01

    An extreme loading study has been conducted comprising a general wind climate analysis as well as a wind turbine reliability study. In the wind climate analysis, the distribution of the (horizontal) turbulence standard deviation, conditioned on the meanwind speed, has been approximated by fitting......, a design turbulence intensity for off-shore application is proposed which, in the IEC code framework, is applicable for extreme as well as for fatigue loaddetermination. In order to establish a rational method to analyse wind turbine components with respect to failure in ultimate loading, and in addition...... to the event of failure in ultimate loading in flapwise bending in the normal operating condition of a site-specific turbine....

  12. Efficiency of Capacitively Loaded Converters

    DEFF Research Database (Denmark)

    Andersen, Thomas; Huang, Lina; Andersen, Michael A. E.;

    2012-01-01

    This paper explores the characteristic of capacitance versus voltage for dielectric electro active polymer (DEAP) actuator, 2kV polypropylene film capacitor as well as 3kV X7R multi layer ceramic capacitor (MLCC) at the beginning. An energy efficiency for capacitively loaded converters...... is introduced as a definition of efficiency. The calculated and measured efficiency curves for charging DEAP actuator, polypropylene film capacitor and X7R MLCC are provided and compared. The attention has to be paid for the voltage dependent capacitive load, like X7R MLCC, when evaluating the charging...... polypropylene film capacitor can be the equivalent capacitive load. Because of the voltage dependent characteristic, X7R MLCC cannot be used to replace the DEAP actuator. However, this type of capacitor can be used to substitute the capacitive actuator with voltage dependent property at the development phase....

  13. electrical load survey electrical load survey and forecast for a ...

    African Journals Online (AJOL)

    eobe

    1, 2NATIONAL CENTRE FOR HYDROPOWER RESEARCH AND DEV., UNIV. OF ILORIN ... be integrated to meet the present and future energy needs of this are ... paper reports the results of electrical load demand and forecast for Elebu rural community located in Kwara State, ... geothermal and ocean energies [5].

  14. RF Loads for Energy Recovery

    CERN Document Server

    Federmann, S; Caspers, F

    2012-01-01

    Different conceptional designs for RF high power loads are presented. One concept implies the use of solid state rectifier modules for direct RF to DC conversion with efficiencies beyond 80%. In addition, robust metallic low-Q resonant structures, capable of operating at high temperatures (>150 ◦C) are discussed. Another design deals with a very high temperature (up to 800 ◦C) air cooled load using a ceramic foam block inside a metal enclosure. This porous ceramic block is the microwave absorber and is not brazed to the metallic enclosure.

  15. Loading Rate for Modulus of Rupture Test

    Institute of Scientific and Technical Information of China (English)

    QUMing; ZHANGYong-fang

    1996-01-01

    Relationship among load rate,strain rate and stress rate for modulus of ruptue test,the way of applying load with stress rate using both hydraulic compression testing machine and nechanical compression testing machine have been described.The test results are identical with selected strain rate loading and stress rate loading.

  16. Fatigue Reliability under Random Loads

    DEFF Research Database (Denmark)

    Talreja, R.

    1979-01-01

    , with the application of random loads, the initial homogeneous distribution of strength changes to a two-component distribution, reflecting the two-stage fatigue damage. In the crack initiation stage, the strength increases initially and then decreases, while an abrupt decrease of strength is seen in the crack...... propagation stage. The consequences of this behaviour on the fatigue reliability are discussed....

  17. Diffusion Indexes with Sparse Loadings

    DEFF Research Database (Denmark)

    Kristensen, Johannes Tang

    to the problem by using the LASSO as a variable selection method to choose between the possible variables and thus obtain sparse loadings from which factors or diffusion indexes can be formed. This allows us to build a more parsimonious factor model which is better suited for forecasting compared...

  18. Experimental investigation of ultimate loads

    Energy Technology Data Exchange (ETDEWEB)

    Petersen, S.M.; Larsen, G.C.; Antoniou, I.; Lind, S.O.; Courtney, M. [Risoe National Lab., Wind Energy and Atmospheric Physics, Roskilde (Denmark)

    1999-03-01

    Verification of the structural integrity of a wind turbine involves analysis of fatigue loading as well as ultimate loading. With the trend of persistently growing turbines, the ultimate loading seems to become relatively more important. For wind turbines designed according to the wind conditions prescribed in the IEC-61400 code, the ultimate load is often identified as the leading load parameter. Exemplified by the use of an extensive measurement campaign a procedure for evaluation of the extreme flap-wise bending moments, occurring during normal operating of a wind turbine, is presented. The structural measurements are made on a NEG Micon 650 kW wind turbine erected at a complex high wind site in Oak Creek, California. The turbine is located on the top of a ridge. The prevailing wind direction is perpendicular to the ridge, and the annual mean wind speed is 9.5 m/s. The associated wind field measurement, are taken from two instrumented masts erected less than one rotor diameter in front of the turbine in direction of the prevailing wind direction. Both masts are instrumented at different heights in order to gain insight of the 3D-wind speed structure over the entire rotor plane. Extreme distributions, associated with a recurrence period of 10 minutes, conditioned on the mean wind speed and the turbulence intensity are derived. Combined with the wind climate model proposed in the IEC standard, these distributions are used to predict extreme distributions with recurrence periods equal to one and fifty years, respectively. The synthesis of the conditioned PDF`s and the wind climate model is performed by means of Monte Carlo simulation. (au)

  19. 46 CFR 154.1730 - Ethylene oxide: Loading and off loading.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Ethylene oxide: Loading and off loading. 154.1730... Operating Requirements § 154.1730 Ethylene oxide: Loading and off loading. (a) The master shall ensure that before ethylene oxide is loaded into a cargo tank: (1) The tank is thoroughly clean, dry, and free of...

  20. Use of Flexible Body Coupled Loads in Assessment of Day of Launch Flight Loads

    Science.gov (United States)

    Starr, Brett R.; Yunis, Isam; Olds, Aaron D.

    2011-01-01

    A Day of Launch flight loads assessment technique that determines running loads calculated from flexible body coupled loads was developed for the Ares I-X Flight Test Vehicle. The technique was developed to quantify DOL flight loads in terms of structural load components rather than the typically used q-alpha metric to provide more insight into the DOL loads. In this technique, running loads in the primary structure are determined from the combination of quasi-static aerodynamic loads and dynamic loads. The aerodynamic loads are calculated as a function of time using trajectory parameters passed from the DOL trajectory simulation and are combined with precalculated dynamic loads using a load combination equation. The potential change in aerodynamic load due to wind variability during the countdown is included in the load combination. In the event of a load limit exceedance, the technique allows the identification of what load component is exceeded, a quantification of how much the load limit is exceeded, and where on the vehicle the exceedance occurs. This technique was used to clear the Ares I-X FTV for launch on October 28, 2009. This paper describes the use of coupled loads in the Ares I-X flight loads assessment and summarizes the Ares I-X load assessment results.

  1. Thermal loading of natural streams

    Science.gov (United States)

    Jackman, Alan P.; Yotsukura, Nobuhiro

    1977-01-01

    The impact of thermal loading on the temperature regime of natural streams is investigated by mathematical models, which describe both transport (convection-diffusion) and decay (surface dissipation) of waste heat over 1-hour or shorter time intervals. The models are derived from the principle of conservation of thermal energy for application to one- and two-dimensional spaces. The basic concept in these models is to separate water temperature into two parts, (1) excess temperature due to thermal loading and (2) natural (ambient) temperature. This separation allows excess temperature to be calculated from the models without incoming radiation data. Natural temperature may either be measured in prototypes or calculated from the model. If use is made of the model, however, incoming radiation is required as input data. Comparison of observed and calculated temperatures in seven natural streams shows that the models are capable of predicting transient temperature regimes satisfactorily in most cases. (Woodard-USGS)

  2. Numerical prediction of slamming loads

    DEFF Research Database (Denmark)

    Seng, Sopheak; Jensen, Jørgen J; Pedersen, Preben T

    2012-01-01

    . The pressure distribution as well as the total force is then determined by integration over a pseudo-three-dimensional presentation of the hull geometry.In this paper the evaluation of the slamming load is taken one step further by performing direct three-dimensional, fully non-linear numerical calculations...... in a realistic wave environment.Both the global and the local slamming loads are assessed numerically using a finite-volume formulation with the free surface captured by a volume-of-fluid technique. This numerical procedure is justified by comprehensive validation studies where numerically evaluated slamming...... pressures are compared with experimentally measured results.To obtain an insight into the three-dimensional flow effects the next step is to apply the validated numerical procedure to evaluate and compare the accuracy and performance of the traditionally used two-dimensional formulations by a comparison...

  3. Auditory perceptual load: A review.

    Science.gov (United States)

    Murphy, Sandra; Spence, Charles; Dalton, Polly

    2017-02-08

    Selective attention is a crucial mechanism in everyday life, allowing us to focus on a portion of incoming sensory information at the expense of other less relevant stimuli. The circumstances under which irrelevant stimuli are successfully ignored have been a topic of scientific interest for several decades now. Over the last 20 years, the perceptual load theory (e.g. Lavie, 1995) has provided one robust framework for understanding these effects within the visual modality. The suggestion is that successful selection depends on the perceptual demands imposed by the task-relevant information. However, less research has addressed the question of whether the same principles hold in audition and, to date, the existing literature provides a mixed picture. Here, we review the evidence for and against the applicability of perceptual load theory in hearing, concluding that this question still awaits resolution.

  4. Trailer-loading of horses

    DEFF Research Database (Denmark)

    Hendriksen, Payana; Elmgreen, Katrine; Ladewig, Jan

    2011-01-01

    The traditional way to train horses is by the application of negative reinforcement (NR). In the past few years, however, the use of positive reinforcement (PR) has become more common. To evaluate the effectiveness and the possible stressor effect of the 2 training methods, 12 horses showing severe...... trailer-loading problems were selected and exposed to trailer-loading. They were randomly assigned to one of the 2 methods. NR consisted of various degrees of pressure (lead rope pulling, whip tapping). Pressure was removed as soon as the horse complied. PR horses were exposed to clicker training...... and taught to follow a target into the trailer. Heart rate (HR) was recorded every 5 seconds and behavior denoting discomfort was observed using one-zero sampling with 10 seconds sampling intervals. Training was completed when the horse could enter the trailer upon a signal, or was terminated after a maximum...

  5. Robust Multimodal Cognitive Load Measurement

    Science.gov (United States)

    2014-03-26

    b) q=0.1 with the load levels, for channel F7 of subject 1. On each box, the red mark is the median; the edges of the box are the 25th and the...channel F7 of subject 1, for two extreme values of q (entropic index); (a) q= 0.9, (b) q= 0.1, in the delta frequency band. As shown, the median of

  6. Polymer brushes under high load.

    Directory of Open Access Journals (Sweden)

    Suzanne M Balko

    Full Text Available Polymer coatings are frequently used to provide repulsive forces between surfaces in solution. After 25 years of design and study, a quantitative model to explain and predict repulsion under strong compression is still lacking. Here, we combine experiments, simulations, and theory to study polymer coatings under high loads and demonstrate a validated model for the repulsive forces, proposing that this universal behavior can be predicted from the polymer solution properties.

  7. PASSIVE DETECTION OF VEHICLE LOADING

    Energy Technology Data Exchange (ETDEWEB)

    Garrett, A.

    2012-01-03

    The Digital Imaging and Remote Sensing Laboratory (DIRS) at the Rochester Institute of Technology, along with the Savannah River National Laboratory is investigating passive methods to quantify vehicle loading. The research described in this paper investigates multiple vehicle indicators including brake temperature, tire temperature, engine temperature, acceleration and deceleration rates, engine acoustics, suspension response, tire deformation and vibrational response. Our investigation into these variables includes building and implementing a sensing system for data collection as well as multiple full-scale vehicle tests. The sensing system includes; infrared video cameras, triaxial accelerometers, microphones, video cameras and thermocouples. The full scale testing includes both a medium size dump truck and a tractor-trailer truck on closed courses with loads spanning the full range of the vehicle's capacity. Statistical analysis of the collected data is used to determine the effectiveness of each of the indicators for characterizing the weight of a vehicle. The final sensing system will monitor multiple load indicators and combine the results to achieve a more accurate measurement than any of the indicators could provide alone.

  8. High Temperature Radio Frequency Loads

    CERN Document Server

    Federmann, S; Grudiev, A; Montesinos, E; Syratchev, I

    2011-01-01

    In the context of energy saving and recovery requirements the design of reliable and robust RF power loads which permit a high outlet temperature and high pressure of the cooling water is desirable. Cooling water arriving at the outlet withmore than 150 ◦C and high pressure has a higher value than water with 50 ◦C under low pressure. Conventional RF power loads containing dielectric and magnetic materials as well as sensitive ceramic windows usually do not permit going much higher than 90 ◦C. Here we present and discuss several design concepts for "metal only" RF high power loads. One concept is the application of magnetic steel corrugated waveguides near cutoff – this concept could find practical use above several GHz. Another solution are resonant structures made of steel to be installed in large waveguides for frequencies of 500 MHz or lower. Similar resonant structures above 100 MHz taking advantage of the rather high losses of normal steel may also be used in coaxial line geometries with large di...

  9. Maximum holding endurance time: Effects of load and load's center of gravity height.

    Science.gov (United States)

    Lee, Tzu-Hsien

    2015-01-01

    Manual holding task is a potential risk to the development of musculoskeletal injuries since it is prone to induce localized muscle fatigue. Maximum holding endurance time is a significant parameter for the design of manual holding task. This study aimed to examine the effects of load and load's COG height on maximum holding endurance time. Fifteen young and healthy males were recruited as participants. A factorial design was used to examine the effects of load and load's COG height on maximum holding endurance time. Four levels of load (15% , 30% , 45% and 60% of the participant's maximum holding capacity) and two levels of load's COG height in box (0 cm and 40 cm high from the handle position) were examined. Maximum holding endurance time decreased with increasing load and/or increasing load's COG height. The effect of load's COG height on maximum holding endurance time decreased with increasing load. Load, load's COG height, and the interaction of load and load's COG height significantly affected maximum holding endurance time. Practitioners should realize the effects of load, load's COG height, and the interaction of load and load's COG height on maximum holding endurance time when setting the working conditions of holding tasks.

  10. Acid loading test (pH)

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/003615.htm Acid loading test (pH) To use the sharing features on this page, please enable JavaScript. The acid loading test (pH) measures the ability of the ...

  11. 30 CFR 57.9317 - Suspended loads.

    Science.gov (United States)

    2010-07-01

    ... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Loading, Hauling, and Dumping Safety Devices, Provisions, and Procedures for Roadways, Railroads, and Loading and Dumping Sites...

  12. Simulation of Stochastic Loads for Fatigue Experiments

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Brincker, Rune

    A simple direct simulation method for stochastic fatigue load generation is described in this paper. The simulation method is based on the assumption that only the peaks of the load process significantly affect the fatigue life. The method requires the conditional distribution functions of load...... second using an IBM PC. Finally the proposed simulation method for fatigue load generation is tested by comparing some fatigue damage measures obtained by the simulation methods....

  13. Plug Load Behavioral Change Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Metzger, I.; Kandt, A.; VanGeet, O.

    2011-08-01

    This report documents the methods and results of a plug load study of the Environmental Protection Agency's Region 8 Headquarters in Denver, Colorado, conducted by the National Renewable Energy Laboratory. The study quantified the effect of mechanical and behavioral change approaches on plug load energy reduction and identified effective ways to reduce plug load energy. Load reduction approaches included automated energy management systems and behavioral change strategies.

  14. Wind loads on solar energy systems

    NARCIS (Netherlands)

    Kampen, B.J.M. van; Geurts, C.P.W.; Borsboom, W.A.; Blackmore, P.

    2005-01-01

    Wind loads on solar energy systems are not covered by current wind loading standards. This paper describes results of a parametric study into the wind loads 0on solar energy systems,. which are placed on flat roofs. Wind tunnel measurements have been carried out on a number of configurations. The

  15. Comparison of load parameters for stored materials

    DEFF Research Database (Denmark)

    Munch-Andersen, J.; Nielsen, J.

    1997-01-01

    that the wall friction measured in a silo might be significantly larger than the value obtained from shear tests. The load parameters depend on the load level, perhaps in a way not reflected by the internal friction angle. It is not necessarily on the safe side to determine the parameters for a high load level....

  16. Wind loads on solar energy systems

    NARCIS (Netherlands)

    Kampen, B.J.M. van; Geurts, C.P.W.; Borsboom, W.A.; Blackmore, P.

    2005-01-01

    Wind loads on solar energy systems are not covered by current wind loading standards. This paper describes results of a parametric study into the wind loads 0on solar energy systems,. which are placed on flat roofs. Wind tunnel measurements have been carried out on a number of configurations. The re

  17. Response of Rubble Foundation to Dynamic Loading

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Ibsen, Lars Bo

    1993-01-01

    The soil beneath vertical monolithic structures is subjected to a combination of static load due to the submerged weight of the structure and stochastic non-stationary loads as a result of the wave loads on the vertical wall. The stress conditions in the soil below a foundation exposed to both st...

  18. Response of Rubble Foundation to Dynamic Loading

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Ibsen, Lars Bo

    1994-01-01

    The soil beneath vertical monolithic structures is subjected to a combination of static load due to the submerged weight of the structure and stochastic non-stationary loads as a result of the wave loads on the vertical wall. The stress conditions in the soil below a foundation exposed to both st...

  19. Introduction to Single Piles under Lateral Loading

    DEFF Research Database (Denmark)

    Augustesen, Anders; Ibsen, Lars Bo

    The purpose of this chapter is to give a short introduction to single piles subjected to lateral loading. First, the observed behaviour of laterally loaded piles is described, i.e. the effects of loading conditions, installation procedure, pile type etc. on pile behaviour are presented (section 1...

  20. Load Characteristics Analysis of State Grid

    Institute of Scientific and Technical Information of China (English)

    Chen Wei; Zhou Feng; Han Xinyang; Shan Baoguo; Zhu Li

    2009-01-01

    @@ Introduction Analysis and forecast of load characteristics are important aspects in power market analysis and prediction.Correctly mastering grid load characteristics and its development trend is not only the vital basis for power planning,generation and operation,but also the important references for formulating the relevant policies.It is usually very hard to grasp the load characteristics of power grid.

  1. Load Bearing Equipment for Bone and Muscle

    Science.gov (United States)

    Shackelford, Linda; Griffith, Bryan

    2015-01-01

    Resistance exercise on ISS has proven effective in maintaining bone mineral density and muscle mass. Exploration missions require exercise with similar high loads using equipment with less mass and volume and greater safety and reliability than resistance exercise equipment used on ISS (iRED, ARED, FWED). Load Bearing Equipment (LBE) uses each exercising person to create and control the load to the partner.

  2. Plutonium Immobilization Can Loading Preliminary Specifications

    Energy Technology Data Exchange (ETDEWEB)

    Kriikku, E.

    1998-11-25

    This report discusses the Plutonium Immobilization can loading preliminary equipment specifications and includes a process block diagram, process description, equipment list, preliminary equipment specifications, plan and elevation sketches, and some commercial catalogs. This report identifies loading pucks into cans and backfilling cans with helium as the top priority can loading development areas.

  3. Wind loads on solar energy systems

    NARCIS (Netherlands)

    Kampen, B.J.M. van; Geurts, C.P.W.; Borsboom, W.A.; Blackmore, P.

    2005-01-01

    Wind loads on solar energy systems are not covered by current wind loading standards. This paper describes results of a parametric study into the wind loads 0on solar energy systems,. which are placed on flat roofs. Wind tunnel measurements have been carried out on a number of configurations. The re

  4. Local Dynamic Stability Associated with Load Carrying

    Directory of Open Access Journals (Sweden)

    Jian Liu

    2013-03-01

    Conclusion: Current study confirmed the sensitivity of local dynamic stability measure in load carrying situation. It was concluded that load carrying tasks were associated with declined local dynamic stability, which may result in increased risk of fall accident. This finding has implications in preventing fall accidents associated with occupational load carrying.

  5. Critical loads - assessment of uncertainty

    Energy Technology Data Exchange (ETDEWEB)

    Barkman, A.

    1998-10-01

    The effects of data uncertainty in applications of the critical loads concept were investigated on different spatial resolutions in Sweden and northern Czech Republic. Critical loads of acidity (CL) were calculated for Sweden using the biogeochemical model PROFILE. Three methods with different structural complexity were used to estimate the adverse effects of S0{sub 2} concentrations in northern Czech Republic. Data uncertainties in the calculated critical loads/levels and exceedances (EX) were assessed using Monte Carlo simulations. Uncertainties within cumulative distribution functions (CDF) were aggregated by accounting for the overlap between site specific confidence intervals. Aggregation of data uncertainties within CDFs resulted in lower CL and higher EX best estimates in comparison with percentiles represented by individual sites. Data uncertainties were consequently found to advocate larger deposition reductions to achieve non-exceedance based on low critical loads estimates on 150 x 150 km resolution. Input data were found to impair the level of differentiation between geographical units at all investigated resolutions. Aggregation of data uncertainty within CDFs involved more constrained confidence intervals for a given percentile. Differentiation as well as identification of grid cells on 150 x 150 km resolution subjected to EX was generally improved. Calculation of the probability of EX was shown to preserve the possibility to differentiate between geographical units. Re-aggregation of the 95%-ile EX on 50 x 50 km resolution generally increased the confidence interval for each percentile. Significant relationships were found between forest decline and the three methods addressing risks induced by S0{sub 2} concentrations. Modifying S0{sub 2} concentrations by accounting for the length of the vegetation period was found to constitute the most useful trade-off between structural complexity, data availability and effects of data uncertainty. Data

  6. Automated Loads Analysis System (ATLAS)

    Science.gov (United States)

    Gardner, Stephen; Frere, Scot; O’Reilly, Patrick

    2013-01-01

    ATLAS is a generalized solution that can be used for launch vehicles. ATLAS is used to produce modal transient analysis and quasi-static analysis results (i.e., accelerations, displacements, and forces) for the payload math models on a specific Shuttle Transport System (STS) flight using the shuttle math model and associated forcing functions. This innovation solves the problem of coupling of payload math models into a shuttle math model. It performs a transient loads analysis simulating liftoff, landing, and all flight events between liftoff and landing. ATLAS utilizes efficient and numerically stable algorithms available in MSC/NASTRAN.

  7. Equilibria in Load Balancing Games

    Institute of Scientific and Technical Information of China (English)

    Bo Chen

    2009-01-01

    A Nash equilibrium (NE) in a multi-agent game is a strategy profile that is resilient to unilateral deviations.A strong Nash equilibrium (SE) is one that is stable against coordinated deviations of any coalition.We show that,in the load balancing games,NEs approximate SEs in the sense that the benefit of each member of any coalition from coordinated deviations is well limited.Furthermore,we show that an easily recognizable special subset of NEs exhibit even better approximation of SEs.

  8. Neighborhood perceptions and allostatic load

    DEFF Research Database (Denmark)

    van Deurzen, Ioana; Rod, Naja Hulvej; Christensen, Ulla;

    2016-01-01

    this line of argumentation, in the present study we test whether subjective perceptions of neighborhood characteristics relate to an objective measure of stress-related physiological functioning, namely allostatic load (AL). We use a large dataset of 5280 respondents living in different regions of Denmark...... and we account for two alternative mechanisms, i.e., the objective characteristics of the living environment and the socio-economic status of individuals. Our results support the chronic stress mechanisms linking neighborhood quality to health. Heightened perceptions of disorder and pollution were found...

  9. Surface modification of MPEG-b-PCL-based nanoparticles via oxidative self-polymerization of dopamine for malignant melanoma therapy

    Science.gov (United States)

    Xiong, Wei; Peng, Lixia; Chen, Hongbo; Li, Qin

    2015-01-01

    To enhance the therapeutic effects of chemotherapy on malignant melanoma, paclitaxel (PTX)-loaded methoxy poly(ethylene glycol)-b-poly(ε-caprolactone) nanoparticles (MPEG-b-PCL NPs) that had their surfaces modified with polydopamine (PTX-loaded MPEG-b-PCL NPs@PDA) were prepared as drug vehicles. The block copolymer MPEG-b-PCL was synthesized by ring-opening polymerization and characterized by proton nuclear magnetic resonance spectroscopy and gel permeation chromatography. The PTX-loaded NPs were prepared by a modified nanoprecipitation technique. The PTX-loaded NPs and PTX-loaded NPs@PDA were characterized in terms of size and size distribution, zeta potential, surface morphology, drug encapsulation efficiency, and drug release. Confocal laser scanning microscopy showed that coumarin-6-loaded NPs@PDA could be internalized by human melanoma cell line A875 cells. The cellular uptake efficiency of NPs was greatly enhanced after PDA modification. The antitumor efficacy of the PTX-loaded NPs@PDA was investigated in vitro by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay and in vivo by a xenograft tumor model. The PTX-loaded NPs@PDA could significantly inhibit tumor growth compared to Taxol® and precursor PTX-loaded NPs. All the results suggested that the PTX-loaded MPEG-b-PCL NPs that had their surfaces modified with PDA are promising nanocarriers for malignant melanoma therapy. PMID:25945046

  10. Surface modification of MPEG-b-PCL-based nanoparticles via oxidative self-polymerization of dopamine for malignant melanoma therapy.

    Science.gov (United States)

    Xiong, Wei; Peng, Lixia; Chen, Hongbo; Li, Qin

    2015-01-01

    To enhance the therapeutic effects of chemotherapy on malignant melanoma, paclitaxel (PTX)-loaded methoxy poly(ethylene glycol)-b-poly(ε-caprolactone) nanoparticles (MPEG-b-PCL NPs) that had their surfaces modified with polydopamine (PTX-loaded MPEG-b-PCL NPs@PDA) were prepared as drug vehicles. The block copolymer MPEG-b-PCL was synthesized by ring-opening polymerization and characterized by proton nuclear magnetic resonance spectroscopy and gel permeation chromatography. The PTX-loaded NPs were prepared by a modified nanoprecipitation technique. The PTX-loaded NPs and PTX-loaded NPs@PDA were characterized in terms of size and size distribution, zeta potential, surface morphology, drug encapsulation efficiency, and drug release. Confocal laser scanning microscopy showed that coumarin-6-loaded NPs@PDA could be internalized by human melanoma cell line A875 cells. The cellular uptake efficiency of NPs was greatly enhanced after PDA modification. The antitumor efficacy of the PTX-loaded NPs@PDA was investigated in vitro by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay and in vivo by a xenograft tumor model. The PTX-loaded NPs@PDA could significantly inhibit tumor growth compared to Taxol(®) and precursor PTX-loaded NPs. All the results suggested that the PTX-loaded MPEG-b-PCL NPs that had their surfaces modified with PDA are promising nanocarriers for malignant melanoma therapy.

  11. Online load forecasting for supermarket refrigeration

    DEFF Research Database (Denmark)

    Bacher, Peder; Madsen, Henrik; Nielsen, Henrik Aalborg

    2013-01-01

    This paper presents a study of models for forecasting the load for supermarket refrigeration. The data used for building the forecasting models consists of load measurements, local climate measurements and weather forecasts. The load measurements are from a supermarket located in a village...... in Denmark. Every hour the hourly load for refrigeration for the following 42 hours is forecasted. The forecast models are time adaptive linear time-series models. The dynamic relations between the inputs and the load is modeled by simple transfer functions. The system operates in two regimes: one...

  12. Novel Musculoskeletal Loading and Assessment System

    Science.gov (United States)

    Downs, Meghan E.

    2017-01-01

    Ground based and ISS (International Space Station) exercise research have shown that axial loading via two-point loading at the shoulders and load quality (i.e. consistent load and at least 1:1 concentric to eccentric ratio) are extremely important to optimize musculoskeletal adaptations to resistance exercise. The Advanced Resistance Exercise Device (ARED) is on ISS now and is the "state of the art" for resistance exercise capabilities in microgravity; however, the ARED is far too large and power consuming for exploration vehicles. The single cable exercise device design selected for MPCV (Multi-Purpose Crew Vehicle), does not readily allow for the two-point loading at the shoulders.

  13. Electric load management and energy conservation

    Science.gov (United States)

    Kheir, N. A.

    1976-01-01

    Electric load management and energy conservation relate heavily to the major problems facing power industry at present. The three basic modes of energy conservation are identified as demand reduction, increased efficiency and substitution for scarce fuels. Direct and indirect load management objectives are to reduce peak loads and have future growth in electricity requirements in such a manner to cause more of it to fall off the system's peak. In this paper, an overview of proposed and implemented load management options is presented. Research opportunities exist for the evaluation of socio-economic impacts of energy conservation and load management schemes specially on the electric power industry itself.

  14. Concurrent Working Memory Load Can Facilitate Selective Attention: Evidence for Specialized Load

    Science.gov (United States)

    Park, Soojin; Kim, Min-Shik; Chun, Marvin M.

    2007-01-01

    Load theory predicts that concurrent working memory load impairs selective attention and increases distractor interference (N. Lavie, A. Hirst, J. W. de Fockert, & E. Viding, see record 2004-17825-003). Here, the authors present new evidence that the type of concurrent working memory load determines whether load impairs selective attention or not.…

  15. APS high heat load monochromator

    Energy Technology Data Exchange (ETDEWEB)

    Lee, W.K.; Mills, D.

    1993-02-01

    This document contains the design specifications of the APS high heat load (HHL) monochromator and associated accessories as of February 1993. It should be noted that work is continuing on many parts of the monochromator including the mechanical design, crystal cooling designs, etc. Where appropriate, we have tried to add supporting documentation, references to published papers, and calculations from which we based our decisions. The underlying philosophy behind performance specifications of this monochromator was to fabricate a device that would be useful to as many APS users as possible, that is, the design should be as generic as possible. In other words, we believe that this design will be capable of operating on both bending magnet and ID beamlines (with the appropriate changes to the cooling and crystals) with both flat and inclined crystal geometries and with a variety of coolants. It was strongly felt that this monochromator should have good energy scanning capabilities over the classical energy range of about 4 to 20 keywith Si (111) crystals. For this reason, a design incorporating one rotation stage to drive both the first and second crystals was considered most promising. Separate rotary stages for the first and second crystals can sometimes provide more flexibility in their capacities to carry heavy loads (for heavily cooled first crystals or sagittal benders of second crystals), but their tuning capabilities were considered inferior to the single axis approach.

  16. Allostatic Load and Preterm Birth

    Directory of Open Access Journals (Sweden)

    David M. Olson

    2015-12-01

    Full Text Available Preterm birth is a universal health problem that is one of the largest unmet medical needs contributing to the global burden of disease. Adding to its complexity is that there are no means to predict who is at risk when pregnancy begins or when women will actually deliver. Until these problems are addressed, there will be no interventions to reduce the risk because those who should be treated will not be known. Considerable evidence now exists that chronic life, generational or accumulated stress is a risk factor for preterm delivery in animal models and in women. This wear and tear on the body and mind is called allostatic load. This review explores the evidence that chronic stress contributes to preterm birth and other adverse pregnancy outcomes in animal and human studies. It explores how allostatic load can be used to, firstly, model stress and preterm birth in animal models and, secondly, how it can be used to develop a predictive model to assess relative risk among women in early pregnancy. Once care providers know who is in the highest risk group, interventions can be developed and applied to mitigate their risk.

  17. Liposome-Loaded Cell Backpacks.

    Science.gov (United States)

    Polak, Roberta; Lim, Rosanna M; Beppu, Marisa M; Pitombo, Ronaldo N M; Cohen, Robert E; Rubner, Michael F

    2015-12-30

    Cell backpacks, or micron-scale patches of a few hundred nanometers in thickness fabricated by layer-by-layer (LbL) assembly, are potentially useful vehicles for targeted drug delivery on the cellular level. In this work, echogenic liposomes (ELIPs) containing the anticancer drug doxorubicin (DOX) are embedded into backpacks through electrostatic interactions and LbL assembly. Poly(allylamine hydrochloride)/poly(acrylic acid) (PAH/PAA)n , and poly(diallyldimethylammonium chloride)/poly(styrene sulfonate) (PDAC/SPS)n film systems show the greatest ELIP incorporation of the films studied while maintaining the structural integrity of the vesicles. The use of ELIPs for drug encapsulation into backpacks facilitates up to three times greater DOX loading compared to backpacks without ELIPs. Cytotoxicity studies reveal that monocyte backpack conjugates remain viable even after 72 h, demonstrating promise as drug delivery vehicles. Because artificial vesicles can load many different types of drugs, ELIP containing backpacks offer a unique versatility for broadening the range of possible applications for cell backpacks.

  18. Tetrahydrobiopterin loading test in hyperphenylalaninemia.

    Science.gov (United States)

    Ponzone, A; Guardamagna, O; Ferraris, S; Ferrero, G B; Dianzani, I; Cotton, R G

    1991-11-01

    Some cases of primary hyperphenylalaninemia are not caused by the lack of phenylalanine hydroxylase, but by the lack of its cofactor tetrahydrobiopterin. These patients are not clinically responsive to a phenylalanine-restricted diet, but need specific substitution therapy. Thus, it became necessary to examine all newborns screened as positive with the Guthrie test for tetrahydrobiopterin deficiency. Methods based on urinary pterin or on specific enzyme activity measurements are limited in their availability, and the simplest method, based on the lowering of serum phenylalanine after loading with cofactor, was discouraged by the finding that some dihydropteridine reductase-deficient patients were unresponsive. The preliminary observation that this limitation could be overcome by increasing the dose of the administered cofactor prompted us to reevaluate the potential of the tetrahydrobiopterin loading test in hyperphenylalaninemia. Fifteen patients, eight with ultimate diagnosis of phenylketonuria, three with 6-pyruvoyl tetrahydropterin synthase-, and four with dihydropteridine reductase-deficiency, have been examined by administering synthetic tetrahydrobiopterin both orally, at doses of 7.5 and 20 mg/kg, and i.v., at a dose of 2 mg/kg. All the tetrahydrobiopterin-deficient patients, unlike those with phenylketonuria, responded to the oral dose of 20 mg/kg cofactor by lowering their serum phenylalanine concentration markedly below baseline to an extent easily detectable by Guthrie cards. This method allows for a simple screening method when enzyme or pterin studies are not available.

  19. Intelligent System for Radial Distribution Load Flow

    Directory of Open Access Journals (Sweden)

    Vaishali Holkar

    2012-10-01

    Full Text Available This paper shows an application of Artificial Neural Networks (ANNs to determine the bus voltages and phase angles of a radial distribution system, without executing the complicated load flow algorithm, for any given load. The performance of the conventional load flow methods such as Newtoh-Raphson load flow, Fast decoupled load flow is found to be very poor under critical conditions such as high R/X ratio, heavily loading condition etc.To overcome the limitations of these regularly used methods a simple and reliable ladder iterative technique is used for solving the power balance equations of radial distribution system (RDS. The proposed method make use of a multi-layer feed forward ANN with error back propagation learning algorithm for calculation of bus voltages and its angles. A sample IEEE 33-bus is extensively tested with the proposed ANN based approach indicating its viability for RDS load flow assessment and results are presented.

  20. Loads in the design of flight vehicles

    Directory of Open Access Journals (Sweden)

    Simion TĂTARU

    2010-09-01

    Full Text Available The calculation of flight loads is a critical part of air vehicle design. On the other hand, the prediction of accurate loads is a sophisticated and complex process that requires skilled and experienced engineers. They must integrate results from wind tunnel tests, computer simulations, historical data and empirical formulations into a number of loads cases that provide a realistic assessment of the flight vehicle’s environment. Under these conditions, the vehicle must satisfy requirements imposed by regulatory agencies as part of the vehicle certification process.Loads and boundary conditions can be associated to either the finite element model or the underlying geometry. By associating loads and boundary conditions to the geometry the finite element model mesh and elements can be modified without redefining and applying the loads to the model. Loads and boundary conditions are associated to the model geometry by default.

  1. Load balancing in integrated optical wireless networks

    DEFF Research Database (Denmark)

    Yan, Ying; Dittmann, Lars; Wong, S-W.;

    2010-01-01

    In this paper, we tackle the load balancing problem in Integrated Optical Wireless Networks, where cell breathing technique is used to solve congestion by changing the coverage area of a fully loaded cell tower. Our objective is to design a load balancing mechanism which works closely with the in......In this paper, we tackle the load balancing problem in Integrated Optical Wireless Networks, where cell breathing technique is used to solve congestion by changing the coverage area of a fully loaded cell tower. Our objective is to design a load balancing mechanism which works closely...... issues are outlined and a cost function based optimization model is developed for power management. In particularly, two alternative feedback schemes are proposed to report wireless network status. Simulation results show that our proposed load balancing mechanism improves network performances....

  2. Load Balancing Algorithm for Cache Cluster

    Institute of Scientific and Technical Information of China (English)

    刘美华; 古志民; 曹元大

    2003-01-01

    By the load definition of cluster, the request is regarded as granularity to compute load and implement the load balancing in cache cluster. First, the processing power of cache-node is studied from four aspects: network bandwidth, memory capacity, disk access rate and CPU usage. Then, the weighted load of cache-node is customized. Based on this, a load-balancing algorithm that can be applied to the cache cluster is proposed. Finally, Polygraph is used as a benchmarking tool to test the cache cluster possessing the load-balancing algorithm and the cache cluster with cache array routing protocol respectively. The results show the load-balancing algorithm can improve the performance of the cache cluster.

  3. Common source-multiple load vs. separate source-individual load photovoltaic system

    Science.gov (United States)

    Appelbaum, Joseph

    1989-01-01

    A comparison of system performance is made for two possible system setups: (1) individual loads powered by separate solar cell sources; and (2) multiple loads powered by a common solar cell source. A proof for resistive loads is given that shows the advantage of a common source over a separate source photovoltaic system for a large range of loads. For identical loads, both systems perform the same.

  4. Pharmacokinetics and biodistribution of polymeric micelles of paclitaxel with Pluronic P123

    Institute of Scientific and Technical Information of China (English)

    Li-mei HAN; Lie GUO; Li-jun ZHANG; Qing-song WANG; Xiao-ling FANG

    2006-01-01

    Aim: To investigate the preparation, in vitro release, in vivo pharmacokinetics and tissue distribution of a novel polymeric micellar formulation of paclitaxel (PTX) with Pluronic P123. Methods: The polymeric micelles of paclitaxel with Pluronic PI23 were prepared by a solid dispersion method. The characteristics of micelles including particle size distribution, morphology and in vitro release of PTX from micelles were carried out. PTX-loaded micellar solutions were administered through the tail vein to healthy Sprague-Dawley rats and Kunming strain mice to assess the pharmacokinetics and tissue distribution of PTX, respectively. Taxol, the commercially available intravenous formulation of PTX, was also administered as control. Results: By using a dynamic light scattering sizer and a transmission electron microscopy, it was shown that the PTX-loaded micelles had a mean size of approximately 25 nm with narrow size distribution and a spherical shape. PTX was continuously released from Pluronic PI23 micelles in release medium containing 1 mol/L sodium salicylate for 24 h at 37℃. In the pharmacokinetic assessment, t1/2β and AUC of micelle formulation were 2.3 and 2.9-fold higher than that of Taxol injection. And the PTX-loaded micelles increased the uptake of PTX in the plasma, ovary and uterus, lung, and kidney, but decreased uptake in the liver and brain in the biodistribution study. Conclusion: Polymeric micelles using Pluronic P123 can effectively solubilize PTX, prolong blood circulation time and modify the biodistribution of PTX.

  5. Load carriage, human performance, and employment standards.

    Science.gov (United States)

    Taylor, Nigel A S; Peoples, Gregory E; Petersen, Stewart R

    2016-06-01

    The focus of this review is on the physiological considerations necessary for developing employment standards within occupations that have a heavy reliance on load carriage. Employees within military, fire fighting, law enforcement, and search and rescue occupations regularly work with heavy loads. For example, soldiers often carry loads >50 kg, whilst structural firefighters wear 20-25 kg of protective clothing and equipment, in addition to carrying external loads. It has long been known that heavy loads modify gait, mobility, metabolic rate, and efficiency, while concurrently elevating the risk of muscle fatigue and injury. In addition, load carriage often occurs within environmentally stressful conditions, with protective ensembles adding to the thermal burden of the workplace. Indeed, physiological strain relates not just to the mass and dimensions of carried objects, but to how those loads are positioned on and around the body. Yet heavy loads must be borne by men and women of varying body size, and with the expectation that operational capability will not be impinged. This presents a recruitment conundrum. How do employers identify capable and injury-resistant individuals while simultaneously avoiding discriminatory selection practices? In this communication, the relevant metabolic, cardiopulmonary, and thermoregulatory consequences of loaded work are reviewed, along with concomitant impediments to physical endurance and mobility. Also emphasised is the importance of including occupation-specific clothing, protective equipment, and loads during work-performance testing. Finally, recommendations are presented for how to address these issues when evaluating readiness for duty.

  6. Impedance matching between ventricle and load.

    Science.gov (United States)

    Piene, H

    1984-01-01

    Impedance matching in the cardiovascular system is discussed in light of two models of ventricle and load: a Thevenin equivalent consisting of a hydromotive pressure source and an internal, source resistance and compliance in parallel; and a time-varying compliance filled from a constant pressure source and ejecting into a load of three components, a central resistor, a compliance, and a peripheral resistance. According to the Thevenin analog, the energy source and the load are matched when the load resistance is T/t times the internal source resistance (T is total cycle length, t is systolic time interval). Both from this model and from the variable compliance model it appears that optimum matching between source and load depends on the compliance of the Windkessel, as low compliance shifts the matching load resistance to a low value. Animal experiments (isolated cat hearts) indicated that both left and right ventricles at normal loads work close to their maxima of output hydraulic power, and, according to experiments in the right ventricle, maximum power output is related to load resistance and compliance as predicted by the above models. From an experimentally determined relationship among instantaneous ventricular pressure and volume (right ventricle of isolated cat hearts), an optimum load impedance was calculated on the basis of the assumption that the ratio between stroke work and static, potential energy developed in the ventricular cavity is maximum. The optimum load impedance found by this procedure closely resembles the normal input impedance of the cat lung vessel bed.

  7. Greywater pollution variability and loadings

    DEFF Research Database (Denmark)

    Eriksson, Eva; Andersen, Henrik Rasmus; Madsen, Toke S.

    2009-01-01

    Small on-site greywater treatment and reuse plants are susceptible to high short-term variation in flow and pollutant concentrations. As demonstrated in this study of a bathroom greywater plant in Copenhagen, Denmark, the flow ranges from no-flow periods to high-flow periods reaching 34 l min−1....... Concentrations of both macro- and micro-pollutants (organic matter and parabens) were found to range by several orders of magnitude in the influent, based on sampling every 20 min. Paraben degradation was proven to occur in the rotating biological contactor (RBC), while the remnant organic matter in the effluent...... was proved not to be readily degradable. Ammonium content, presumably from urine contamination, was found to undergo nitrification in the RBC. Mass flow (daily loads) for individual substances was calculated for several pollutants. Macropollutants were found to be generated in low numbers of grams per person...

  8. Impaired sleep and allostatic load

    DEFF Research Database (Denmark)

    Clark, Alice Jessie; Dich, Nadya; Lange, Theis

    2014-01-01

    Objective: Understanding the mechanisms linking sleep impairment to morbidity and mortality is important for future prevention, but these mechanisms are far from elucidated. We aimed to determine the relation between impaired sleep, both in terms of duration and disturbed sleep, and allostatic load...... Biobank with comprehensive information on sleep duration, disturbed sleep, objective measures of an extensive range of biological risk markers, and physical conditions. Results: Long sleep (mean difference 0.23; 95% confidence interval, 0.13, 0.32) and disturbed sleep (0.14; 0.06, 0.22) were associated...... with higher AL as well as with high-risk levels of risk markers from the anthropometric, metabolic, and immune system. Sub-analyses suggested that the association between disturbed sleep and AL might be explained by underlying disorders. Whereas there was no association between short sleep and AL...

  9. Impaired sleep and allostatic load

    DEFF Research Database (Denmark)

    Clark, Alice Jessie; Dich, Nadya; Lange, Theis

    2014-01-01

    Objective: Understanding the mechanisms linking sleep impairment to morbidity and mortality is important for future prevention, but these mechanisms are far from elucidated. We aimed to determine the relation between impaired sleep, both in terms of duration and disturbed sleep, and allostatic load...... Biobank with comprehensive information on sleep duration, disturbed sleep, objective measures of an extensive range of biological risk markers, and physical conditions. Results: Long sleep (mean difference 0.23; 95% confidence interval, 0.13, 0.32) and disturbed sleep (0.14; 0.06, 0.22) were associated...... with higher AL as well as with high-risk levels of risk markers from the anthropometric, metabolic, and immune system. Sub-analyses suggested that the association between disturbed sleep and AL might be explained by underlying disorders. Whereas there was no association between short sleep and AL...

  10. Load limiting parachute inflation control

    Energy Technology Data Exchange (ETDEWEB)

    Redmond, J.; Hinnerichs, T.; Parker, G.

    1994-01-01

    Excessive deceleration forces experienced during high speed deployment of parachute systems can cause damage to the payload and the canopy fabric. Conventional reefing lines offer limited relief by temporarily restricting canopy inflation and limiting the peak deceleration load. However, the open-loop control provided by existing reefing devices restrict their use to a specific set of deployment conditions. In this paper, the sensing, processing, and actuation that are characteristic of adaptive structures form the basis of three concepts for active control of parachute inflation. These active control concepts are incorporated into a computer simulation of parachute inflation. Initial investigations indicate that these concepts promise enhanced performance as compared to conventional techniques for a nominal release. Furthermore, the ability of each controller to adapt to off-nominal release conditions is examined.

  11. Obsidian hydration dates glacial loading?

    Science.gov (United States)

    Friedman, I; Pierce, K L; Obradovich, J D; Long, W D

    1973-05-18

    Three different groups of hydration rinds have been measured on thin sections of obsidian from Obsidian Cliff, Yellowstone National Park, Wyoming. The average thickness of the thickest (oldest) group of hydration rinds is 16.3 micrometers and can be related to the original emplacement of the flow 176,000 years ago (potassium-argon age). In addition to these original surfaces, most thin sections show cracks and surfaces which have average hydration rind thicknesses of 14.5 and 7.9 micrometers. These later two hydration rinds compare closely in thickness with those on obsidian pebbles in the Bull Lake and Pinedale terminal moraines in the West Yellowstone Basin, which are 14 to 15 and 7 to 8 micrometers thick, respectively. The later cracks are thought to have been formed by glacial loading during the Bull Lake and Pinedale glaciations, when an estimated 800 meters of ice covered the Obsidian Cliff flow.

  12. High voltage load resistor array

    Energy Technology Data Exchange (ETDEWEB)

    Lehmann, Monty Ray [Smithfield, VA

    2005-01-18

    A high voltage resistor comprising an array of a plurality of parallel electrically connected resistor elements each containing a resistive solution, attached at each end thereof to an end plate, and about the circumference of each of the end plates, a corona reduction ring. Each of the resistor elements comprises an insulating tube having an electrode inserted into each end thereof and held in position by one or more hose clamps about the outer periphery of the insulating tube. According to a preferred embodiment, the electrode is fabricated from stainless steel and has a mushroom shape at one end, that inserted into the tube, and a flat end for engagement with the end plates that provides connection of the resistor array and with a load.

  13. Phosphorous Loading in Lake Champlain

    Science.gov (United States)

    Hoffman, H.; Halliday, B.; Lane, T.

    2016-12-01

    Phosphate movement from different sources into Lake Champlain is a problem. Excess phosphate generates algae growth causing eutrophication. This excessive growth known as algae blooms leads to poor water quality (State of Lake Report, 2015). Phosphate moves primarily by attachment to soil particles (Busman, Lamb, 09). Historically its movement has been limited to spring, summer and fall. Spring runoff is thought to contribute the most phosphate to Lake Champlain (Jensen, Tiessen, 11). With changes in global and local temperatures effecting weather patterns and the winter season, does phosphate continue to move into Lake Champlain during the winter months? Water samples from two tributaries to Lake Champlain were collected biweekly year around for the past three years. These samples were then tested for total suspended solids and phosphate levels. The results indicate that phosphate loading occurs throughout the year even during the winter months.

  14. Beryllium strain under dynamic loading

    Directory of Open Access Journals (Sweden)

    Pushkov Victor

    2015-01-01

    Full Text Available There are some data (not much on dynamic characteristics of beryllium that are important, for example, when estimating construction performance at NPP emergencies. A number of data on stress-strain curves, spall strength, shear strength, fracture and structure responses of shock loaded beryllium have obtained in US and Russian laboratories. For today the model description of this complex metal behavior does not have a reasonable agreement with the experimental data, thus a wider spectrum of experimental data is required. This work presents data on dynamic compression-test diagrams of Russian beryllium. Experiments are performed using Hopkinson bar method (SHPB. Strain rates were ε ∼ 103 s−1.

  15. Allostatic load and biological anthropology.

    Science.gov (United States)

    Edes, Ashley N; Crews, Douglas E

    2017-01-01

    Multiple stressors affect developing and adult organisms, thereby partly structuring their phenotypes. Determining how stressors influence health, well-being, and longevity in human and nonhuman primate populations are major foci within biological anthropology. Although much effort has been devoted to examining responses to multiple environmental and sociocultural stressors, no holistic metric to measure stress-related physiological dysfunction has been widely applied within biological anthropology. Researchers from disciplines outside anthropology are using allostatic load indices (ALIs) to estimate such dysregulation and examine life-long outcomes of stressor exposures, including morbidity and mortality. Following allostasis theory, allostatic load represents accumulated physiological and somatic damage secondary to stressors and senescent processes experienced over the lifespan. ALIs estimate this wear-and-tear using a composite of biomarkers representing neuroendocrine, cardiovascular, metabolic, and immune systems. Across samples, ALIs are associated significantly with multiple individual characteristics (e.g., age, sex, education, DNA variation) of interest within biological anthropology. They also predict future outcomes, including aspects of life history variation (e.g., survival, lifespan), mental and physical health, morbidity and mortality, and likely health disparities between groups, by stressor exposures, ethnicity, occupations, and degree of departure from local indigenous life ways and integration into external and commodified ones. ALIs also may be applied to similar stress-related research areas among nonhuman primates. Given the reports from multiple research endeavors, here we propose ALIs may be useful for assessing stressors, stress responses, and stress-related dysfunction, current and long-term cognitive function, health and well-being, and risk of early mortality across many research programs within biological anthropology.

  16. Load research manual. Volume 2. Fundamentals of implementing load research procedures

    Energy Technology Data Exchange (ETDEWEB)

    Brandenburg, L.; Clarkson, G.; Grund, Jr., C.; Leo, J.; Asbury, J.; Brandon-Brown, F.; Derderian, H.; Mueller, R.; Swaroop, R.

    1980-11-01

    This three-volume manual presents technical guidelines for electric utility load research. Special attention is given to issues raised by the load data reporting requirements of the Public Utility Regulatory Policies Act of 1978 and to problems faced by smaller utilities that are initiating load research programs. In Volumes 1 and 2, procedures are suggested for determining data requirements for load research, establishing the size and customer composition of a load survey sample, selecting and using equipment to record customer electricity usage, processing data tapes from the recording equipment, and analyzing the data. Statistical techniques used in customer sampling are discussed in detail. The costs of load research also are estimated, and ongoing load research programs at three utilities are described. The manual includes guides to load research literature and glossaries of load research and statistical terms.

  17. [Environment load from China's cement production].

    Science.gov (United States)

    Zhu, Tian-le; He, Wei; Zeng, Xiao-lan; Huang, Xin; Ma, Bao-guo

    2006-10-01

    Based on the life-cycle theory, a quantitative evaluation of the environment load caused by cement manufacturing in China was carried out with the application of the CML. environmental impact assessment method. The results show that global warming potential, energy depletion potential and abiotic depletion potential make the main contribution to the environment impact, their environmental loads corresponding to identical environmental impact sorts being 2.76%, 2.34% and 1.39% of the overall load of the whole world, respectively. In 2004, the environment load from cement manufacturing in China is roughly 1.28% of the overall load of the whole world, in which the environmental loads from the shaft kiln processing, wet rotary processing and new-type dry processing being 0.84%, 0.12% and 0.32%, respectively. And it can be reduced to about 1% by replacing backward production processes with the dry method production process.

  18. Static Load Distribution in Ball Bearings

    Science.gov (United States)

    Ricci, Mario

    2010-01-01

    A numerical procedure for computing the internal loading distribution in statically loaded, single-row, angular-contact ball bearings when subjected to a known combined radial and thrust load is presented. The combined radial and thrust load must be applied in order to avoid tilting between inner and outer rings. The numerical procedure requires the iterative solution of Z + 2 simultaneous nonlinear equations - where Z is the number of the balls - to yield an exact solution for axial and radial deflections, and contact angles. Numerical results for a 218 angular-contact ball bearing have been compared with those from the literature and show significant differences in the magnitudes of the ball loads, contact angles, and the extent of the loading zone.

  19. Timber joints under long-term loading

    DEFF Research Database (Denmark)

    Feldborg, T.; Johansen, M.

    This report describes tests and results from stiffness and strength testing of splice joints under long-term loading. During two years of loading the spicimens were exposed to cyclically changing relative humidity. After the loading period the specimens were short-term tested. The connectors were...... integral nail-plates and nailed steel and plywood gussets. The report is intended for designers and researchers in timber engineering....

  20. Modeling and control of thermostatically controlled loads

    OpenAIRE

    2011-01-01

    As the penetration of intermittent energy sources grows substantially, loads will be required to play an increasingly important role in compensating the fast time-scale fluctuations in generated power. Recent numerical modeling of thermostatically controlled loads (TCLs) has demonstrated that such load following is feasible, but analytical models that satisfactorily quantify the aggregate power consumption of a group of TCLs are desired to enable controller design. We develop such a model for...

  1. Assessment of wind turbine load measurement instrumentation

    Energy Technology Data Exchange (ETDEWEB)

    Morfiadakis, E.; Papadopoulos, K. [CRES (Greece); Borg, N. van der [ECN, Petten (Netherlands); Petersen, S.M. [Risoe, Roskilde (Denmark); Seifert, H. [DEWI, Wilhelmshaven (Germany)

    1999-03-01

    In the framework of Sub-Task3 `Wind turbine load measurement instrumentation` of EU-project `European Wind Turbine Testing Procedure Development`, the load measurement techniques have been assessed by laboratory, full scale and numerical tests. The existing methods have been reviewed with emphasis on the strain gage application techniques on composite materials and recommendations are provided for the optimisation of load measurement techniques. (au) EU. 14 refs.

  2. Stabilization of Externally Slung Helicopter Loads

    Science.gov (United States)

    1974-08-01

    maximum slir^ Loao weighting and " vertical bounce ." The last question provides information on multi-point suspension of external 1oads. PHASE...an allowable cargo load, and vertical bounce . 110 Maximum Sling Load Weight The maximum sling load lifted by a CH-47B helicopter under...changes were made in their flying technique except for very smooth flight control inputs when lifting an ACL. Vertical Bounce Fifteen of the forty Army

  3. Effect of practice on perceptual load

    OpenAIRE

    Mejia-Ramirez, Manuel

    2013-01-01

    Within attention studies, Lavie's load theory (Lavie & Tsal, 1994; Lavie, Hirst, de Fockert, & Viding, 2004) presented an account that could settle the question whether attention selects stimuli to be processed at an early or late stage of cognitive processing. This theory relied on the concepts of "perceptual load" and "attentional capacity", proposing that attentional resources are automatically allocated to stimuli, but when the perceptual load of the stimuli exceeds person's capacity, tas...

  4. Load prediction of stall regulated wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    Bjoerck, A.; Dahlberg, J.Aa. [Aeronautical Research Inst. of Sweden, Bromma (Sweden); Carlen, I. [Chalmers Univ. of Technology, Goeteborg (Sweden). Div. of Marine Structural Engineering; Ganander, H. [Teknikgruppen AB, Sollentua (Sweden)

    1996-12-01

    Measurements of blade loads on a turbine situated in a small wind farm shows that the highest blade loads occur during operation close to the peak power i.e. when the turbine operates in the stall region. In this study the extensive experimental data base has been utilised to compare loads in selected campaigns with corresponding load predictions. The predictions are based on time domain simulations of the wind turbine structure, performed by the aeroelastic code VIDYN. In the calculations a model were adopted in order to include the effects of dynamic stall. This paper describes the work carried out so far within the project and key results. 5 refs, 10 figs

  5. Study on Loading Ability of Straw Bale

    Institute of Scientific and Technical Information of China (English)

    LIU Kun; JIANG Enchen; DUAN Jieli

    2006-01-01

    The loading ability of straw bale was tested by Electronical Testing Machine. The linear regression equations were proposed between failure density and loading ability, and failure density and compressing energy.Based on an exponent model, the testing coefficients of straw bale were estimated using Levenberg-Marquardt Method. The results of test showed that the relation between failure density and loading ability and compressing energy was linear in the phase of high density. The loading ability of straw bale could meet the building bill.

  6. Comparison of Temperature Loadings of Bridge Girders

    Directory of Open Access Journals (Sweden)

    J. Římal

    2008-01-01

    Full Text Available This paper compares the effect of temperature changes on the superstructure of bridges, above all the effect of non-uniform temperature. Loadings according to standards ESN 73 6203, ENV 1991-1-5 and DIN 1072 are compared here. The paper shows a short summary of temperature loading according to each standard and shows the comparison of bending moments arisen from these temperature loadings on superstructure made from continuous girder from a steel-concrete box girder with a composite concrete slab. With respect to a variety of design processes, the comparison is made without any coefficient of loading, combination or material. 

  7. Target Loading from a Submerged Explosion

    Directory of Open Access Journals (Sweden)

    Andrew Wardlaw

    2010-01-01

    Full Text Available The pressure on a flat plate suspended over a submerged detonation is measured and simulated. Calculation and experiment are in relatively good agreement, although there is variation in experimental results and simulations are sensitive, near the centerline, to the computational details. This sensitivity is linked to the instability of the accelerating plume, typical of a Richtmyer-Meshkov instability. The plate loading features an initial force at plate center, followed by an expanding circular loading pattern. The initial load is due to plume impact, while the circular load arises from the impact of water transported up the edges of the explosion cavity.

  8. System and method employing a self-organizing map load feature database to identify electric load types of different electric loads

    Science.gov (United States)

    Lu, Bin; Harley, Ronald G.; Du, Liang; Yang, Yi; Sharma, Santosh K.; Zambare, Prachi; Madane, Mayura A.

    2014-06-17

    A method identifies electric load types of a plurality of different electric loads. The method includes providing a self-organizing map load feature database of a plurality of different electric load types and a plurality of neurons, each of the load types corresponding to a number of the neurons; employing a weight vector for each of the neurons; sensing a voltage signal and a current signal for each of the loads; determining a load feature vector including at least four different load features from the sensed voltage signal and the sensed current signal for a corresponding one of the loads; and identifying by a processor one of the load types by relating the load feature vector to the neurons of the database by identifying the weight vector of one of the neurons corresponding to the one of the load types that is a minimal distance to the load feature vector.

  9. Measuring training load in sports.

    Science.gov (United States)

    Lambert, Michael Ian; Borresen, Jill

    2010-09-01

    The principle of training can be reduced to a simple "dose-response" relationship. The "response" in this relationship can be measured as a change in performance or the adaptation of a physiological system. The "dose" of training, or physiological stress associated with the training load, is more difficult to measure as there is no absolute "gold standard" which can be used in the field, making it difficult to validate procedures. Attempts have been made to use heart rate as a marker of intensity during training, but the theoretical attractiveness of this method is not supported by the accuracy and the practicality of using this method during training or competition. The session RPE, based on the product of training duration and perceived intensity is more practical and can be used in a variety of sports. However, the score depends on a subjective assessment, and the intersubject comparisons may be inaccurate. The demands of different sports vary and therefore the methods of assessing training need to vary accordingly. The time has come to reach consensus on assessing training accurately in different sports. There is a precedent for this consensus approach with scientists having already done so for the assessment of physical activity, and for defining injuries in rugby, football and cricket. Standardizing these methods has resulted in the quality of research in these areas increasing exponentially.

  10. Procedures for Calculating Residential Dehumidification Loads

    Energy Technology Data Exchange (ETDEWEB)

    Winkler, Jon [National Renewable Energy Lab. (NREL), Golden, CO (United States); Booten, Chuck [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-06-01

    Residential building codes and voluntary labeling programs are continually increasing the energy efficiency requirements of residential buildings. Improving a building's thermal enclosure and installing energy-efficient appliances and lighting can result in significant reductions in sensible cooling loads leading to smaller air conditioners and shorter cooling seasons. However due to fresh air ventilation requirements and internal gains, latent cooling loads are not reduced by the same proportion. Thus, it's becoming more challenging for conventional cooling equipment to control indoor humidity at part-load cooling conditions and using conventional cooling equipment in a non-conventional building poses the potential risk of high indoor humidity. The objective of this project was to investigate the impact the chosen design condition has on the calculated part-load cooling moisture load, and compare calculated moisture loads and the required dehumidification capacity to whole-building simulations. Procedures for sizing whole-house supplemental dehumidification equipment have yet to be formalized; however minor modifications to current Air-Conditioner Contractors of America (ACCA) Manual J load calculation procedures are appropriate for calculating residential part-load cooling moisture loads. Though ASHRAE 1% DP design conditions are commonly used to determine the dehumidification requirements for commercial buildings, an appropriate DP design condition for residential buildings has not been investigated. Two methods for sizing supplemental dehumidification equipment were developed and tested. The first method closely followed Manual J cooling load calculations; whereas the second method made more conservative assumptions impacting both sensible and latent loads.

  11. Load-Speed Interaction Effects on the Biomechanics of Backpack Load Carriage

    Science.gov (United States)

    2001-05-01

    Backpack Load Carriage DISTRIBUTION: Approved for public release, distribution unlimited This paper is part of the following report: TITLE: Soldier...1 Load-Speed Interaction Effects on the Biomechanics of Backpack Load Carriage Everett Harman, Ki-Hoon Han, and Peter Frykman U.S. Army Research...Institute of Environmental Medicine Natick, MA, 01760-5007, U.S.A. Summary We biomechanically examined how backpack load and walking speed interact in

  12. Strategies for Controlling Plug Loads. A Tool for Reducing Plug Loads in Commercial Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Torcellini, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bonnema, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sheppy, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States); Pless, Shanti [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-09-01

    Plug loads are often not considered as part of the energy savings measures in Commercial Buildings; however, they can account for up to 50% of the energy used in the building. These loads are numerous and often scattered throughout a building. Some of these loads are purchased by the owner and some designed into the building or the tenant finishes for a space. This document provides a strategy and a tool for minimizing these loads.

  13. 1997 Pacific Northwest Loads and Resources Study.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    1997-12-01

    The 1997 White Book is presented in two documents: (1) this summary of Federal system and Pacific Northwest region loads and resources; and (2) a technical appendix detailing the loads and resources for each major Pacific Northwest generating utility. Data detailing Pacific Northwest non-utility generating (NUG) resources is also available upon request. This analysis updates the 1996 pacific Northwest Loads and Resources Study, published in December 1996. In this loads and resources study, resource availability is compared with a medium forecast of electricity consumption. This document analyzes the Pacific Northwest`s projected loads and available generating resources in two parts: (1) the loads and resources of the Federal system, for which BPA is the marketing agency; and (2) the larger Pacific Northwest regional power system which includes loads and resources in addition to the Federal system. This study presents the Federal system and regional analyses for the medium load forecast. This analysis projects the yearly average energy consumption and resource availability for Operating Years (OY) 1998--99 through 2007--08.

  14. Investigation of rotor control system loads

    Institute of Scientific and Technical Information of China (English)

    Sun Tao; Tan Jianfeng; Wang Haowen

    2013-01-01

    This paper concentrates on the aeroelasticity analysis of rotor blade and rotor control systems. A new multi-body dynamics model is established to predict both rotor pitch link loads and swashplate servo loads. Two helicopter rotors of UH-60A and SA349/2, both operating in two critical flight conditions, high-speed flight and high-thrust flight, are studied. The analysis shows good agreements with the flight test data and the calculation results using CAMRAD II. The mechanisms of rotor control loads are then analyzed in details based on the present predictions and the flight test data. In high-speed conditions, the pitch link loads are dominated by the integral of blade pitching moments, which are generated by cyclic pitch control. In high-thrust conditions, the positive pitching loads in the advancing side are caused by high collective pitch angle, and dynamic stall in the retreating side excites high-frequency responses. The swashplate servo loads are predominated by the rotor pitch link loads, and the inertia of the swashplate has significant effects on high-frequency harmonics of the servo loads.

  15. Simulating liquid loading in gas wells

    NARCIS (Netherlands)

    Schiferli, W.; Belfroid, S.P.C.; Savenko, S.; Veeken, C.A.M.; Hu, B.

    2010-01-01

    This paper describes work performed by the authors over the last several years to better understand the factors affecting the onset of liquid loading. To further improve the prediction of onset of liquid loading, efforts were undertaken to better model the process. Dedicated codes as well as a comme

  16. Synthetic jet actuation for load control

    NARCIS (Netherlands)

    Vries, de H.; Weide, van der E.T.A.; Hoeijmakers, H.W.M.

    2014-01-01

    The reduction of wind turbine blade loads is an important issue in the reduction of the costs of energy production. Reduction of the loads of a non-cyclic nature requires so-called smart rotor control, which involves the application of distributed actuators and sensors to provide fast and local chan

  17. Perceptual Load Modulates Object-Based Attention

    Science.gov (United States)

    Ho, Ming-Chou; Atchley, Paul

    2009-01-01

    Two experimental series are reported using both reaction time (RT) and a data-limited perceptual report to examine the effects of perceptual load on object-based attention. Perceptual load was manipulated across 3 levels by increasing the complexity of perceptual judgments. Data from the RT-based experiments showed object-based effects when the…

  18. Controllable Load Management Approaches in Smart Grids

    Directory of Open Access Journals (Sweden)

    Jingshuang Shen

    2015-10-01

    Full Text Available With rapid smart grid technology development, the customer can actively participate in demand-side management (DSM with the mutual information communication between the distributor operation company and the smart devices in real-time. Controllable load management not only has the advantage of peak shaving, load balance, frequency regulation, and voltage stability, but is also effective at providing fast balancing services to the renewable energy grid in the distributed power system. The load management faces an enormous challenge as the customer has a large number of both small residential loads and dispersed renewable sources. In this paper, various controllable load management approaches are discussed. The traditional controllable load approaches such as the end users’ controllable appliances, storage battery, Vehicle-to-Grid (V2G, and heat storage are reviewed. The “broad controllable loads” management, such as the microgrid, Virtual Power Plant (VPP, and the load aggregator are also presented. Furthermore, the load characteristics, control strategies, and control effectiveness are analyzed.

  19. Parameter estimation of harmonic polluting industrial loads

    Energy Technology Data Exchange (ETDEWEB)

    Maza-Ortega, J.M.; Gomez-Exposito, A.; Trigo-Garcia, J.L.; Burgos-Payan, M. [University of Sevilla, Sevilla (Spain). Department of Electrical Engineering

    2005-12-01

    This paper develops a methodology for the estimation of relevant parameters characterizing harmonic polluting industrial loads through a set of measurements acquired at the point of common coupling. The proposed method is capable of obtaining an accurate load model in absence of detailed information about its internal structure and composition. (author)

  20. Retrofitting of RC Slabs Against Explosive Loads

    Institute of Scientific and Technical Information of China (English)

    WU Chengqing; OEHLERS Deric John; XIA Shaohua

    2006-01-01

    With the increase of terrorist bomb attacks on buildings,there is a need to develop advanced retrofitting techniques to strengthen structures against blast loads.Currently,several guidelines including an Australian version for retrofitting reinforced concrete (RC) structures are available for the design of retrofitting systems against seismic and monotonic loads using steel or fibre reinforced polymer (FRP) plates that can be either adhesively bonded to the surface or near surface mounted to the concrete cover.However,none of these guidelines provide advice suitable for retrofitting structures subjected to blast loads.In this paper,numerical models are used to simulate the performance of retrofitted RC slabs subjected to blast loads.Airblast pressure distributions on the surface of the slabs estimated in a previous study are used as input in the analysis.A material damage model developedpreviously for concrete and an elastoplastic model for steel bars are employed in this research for modelling reinforced concrete behaviour due to explosive loads.The material models and blast loading are coded into a finite element computer program LS-DYNA3D to do the analysis.With the numerical model,parametric studies are conducted to investigate RC slabs retrofitted by either externally bonded or near-surface mounted plates or GFRP sheets subjected to blast loads.Discussion is made on the effectiveness of the retrofitting system for RC slabs against blast loads.

  1. Duration of load effects of solid wood

    DEFF Research Database (Denmark)

    Svensson, Staffan

    Test methods for studying the effect of long-term loading on the load carrying capacity of structural wood are discussed. The impact of sampling procedures on test results is investigated and is exemplified. It is concluded from this investigation that the sampling method has a significant impact...

  2. Controlling the loading of protein nanocages

    NARCIS (Netherlands)

    Rurup, W.F.

    2013-01-01

    The work described in this thesis focuses on the use of natural protein building blocks to assemble nanocages. Most common strategies for the loading of different protein nanocages suffer from a lack of numerical control over cargo loading. The aim of this thesis was to create a controllable method

  3. Synthetic jet actuation for load control

    NARCIS (Netherlands)

    de Vries, Hein; van der Weide, Edwin Theodorus Antonius; Hoeijmakers, Hendrik Willem Marie

    2014-01-01

    The reduction of wind turbine blade loads is an important issue in the reduction of the costs of energy production. Reduction of the loads of a non-cyclic nature requires so-called smart rotor control, which involves the application of distributed actuators and sensors to provide fast and local chan

  4. Direct Load Control by AC Frequency Modulation

    DEFF Research Database (Denmark)

    Douglass, Philip James; You, Shi

    2012-01-01

    Fine-grained under frequency load shedding called “demand as a frequency controlled reserve“ (DFCR) has been shown to be a promising method of providingfrequency regulation service from distributed loads [1]. Micro-grids with a large portion of intermittent renewable generation will benefit great...

  5. Cardboard Activity Is "Loaded" with Learning

    Science.gov (United States)

    Roman, Harry T.

    2010-01-01

    In this article, the author presents an activity that uses simple paperboard from the back of a pad of paper to illustrate some basic construction principles as students experiment with conducting load tests. The author describes the steps in conducting a load test as well as adding a strut support system. The important lesson here is that…

  6. Cell Load Balancing in Heterogeneous Scenarios

    DEFF Research Database (Denmark)

    Eduardo, Simao; Rodrigues, Antonio; Mihovska, Albena D.

    2013-01-01

    Cell load imbalances in wireless networks degrade performance. Macro and small cell collocated deployments (heterogeneous scenario) constitutes a new problem for load balancing. This paper proposes a novel admission control algorithm for an optimal solution to the assignment of traffic flows...

  7. Static load testing of a heliostat drive

    Energy Technology Data Exchange (ETDEWEB)

    Grossman, J.W.

    1991-10-01

    The drive designed and built by the Solar Power Engineering Company (SPECO) for its large area heliostat failed under high wind loads during a winter storm. This report details the testing and analysis done to verify the load capabilities of the rebuilt heliostat drive. Changes in design and improvements in fabrication resulted in a usable drive. 12 figs., 7 tabs.

  8. Distributed dynamic load balancing in wireless networks

    NARCIS (Netherlands)

    S.C. Borst (Sem); I. Saniee; P.A. Whiting

    2007-01-01

    htmlabstractSpatial and temporal load variations, e.g. flash overloads and traffic hot spots that persist for minutes to hours, are intrinsic features of wireless networks, and give rise to potentially huge performance repercussions. Dynamic load balancing strategies provide a natural mechanism for

  9. Critical loads of heavy metals for soils

    NARCIS (Netherlands)

    Vries, de W.; Groenenberg, J.E.; Lofts, S.; Tipping, E.; Posch, M.

    2012-01-01

    To enable a precautionary risk assessment for future inputs of metals, steady-state methods have been developed to assess critical loads of metals avoiding long-term risks to food quality and eco-toxicological effects on organisms in soils and surface waters. A critical load for metals equals the lo

  10. Load balancing by redundant decomposition and maping

    NARCIS (Netherlands)

    de Ronde, J.F.; Schoneveld, A.; Sloot, P.M.A.

    1997-01-01

    In this paper a new methodology for load balancing parallel processes on parallel systems is proposed. The problem of load balancing is considered to be an NP-hard optimization task. Taking static parallel finite element applications as a case study, the benefits and losses that follow from applying

  11. Load-Bearing Capacity of Roof Trusses

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Damkilde, Lars; Munch-Andersen, J.

    2004-01-01

    systems such as roof trusses are established and statistical characteristics of the load bearing capacity are determined. The results show that there is a significant increase in the characteristic (nominal) value and a reduction in the coefficient of variation (COV) for typical loads such as permanent...

  12. Load balancing by redundant decomposition and maping

    NARCIS (Netherlands)

    de Ronde, J.F.; Schoneveld, A.; Sloot, P.M.A.

    1997-01-01

    In this paper a new methodology for load balancing parallel processes on parallel systems is proposed. The problem of load balancing is considered to be an NP-hard optimization task. Taking static parallel finite element applications as a case study, the benefits and losses that follow from applying

  13. Using Utility Load Data to Estimate Demand for Space Cooling and Potential for Shiftable Loads

    Energy Technology Data Exchange (ETDEWEB)

    Denholm, P.; Ong, S.; Booten, C.

    2012-05-01

    This paper describes a simple method to estimate hourly cooling demand from historical utility load data. It compares total hourly demand to demand on cool days and compares these estimates of total cooling demand to previous regional and national estimates. Load profiles generated from this method may be used to estimate the potential for aggregated demand response or load shifting via cold storage.

  14. Diluting the Burden of Load: Perceptual Load Effects Are Simply Dilution Effects

    Science.gov (United States)

    Tsal, Yehoshua; Benoni, Hanna

    2010-01-01

    The substantial distractor interference obtained for small displays when the target appears alone is reduced in large displays when the target is embedded among neutral letters. This finding has been interpreted as reflecting low-load and high-load processing, respectively, thereby supporting the theory of perceptual load (Lavie & Tsal, 1994).…

  15. Diagonal loading least squares time delay estimation

    Institute of Scientific and Technical Information of China (English)

    LI Xuan; YAN Shefeng; MA Xiaochuan

    2012-01-01

    Least squares (LS) time delay estimation is a classical and effective method. However, the performance is degraded severely in the scenario of low ratio of signal-noise (SNR) due to the instability of matrix inversing. In order to solve the problem, diagonal loading least squares (DL-LS) is proposed by adding a positive definite matrix to the inverse matrix. Furthermore, the shortcoming of fixed diagonal loading is analyzed from the point of regularization that when the tolerance of low SNR is increased, veracity is decreased. This problem is resolved by reloading. The primary estimation's reciprocal is introduced as diagonal loading and it leads to small diagonal loading at the time of arrival and larger loading at other time. Simulation and pool experiment prove the algorithm has better performance.

  16. Adaptive load shedding and regional protection

    Energy Technology Data Exchange (ETDEWEB)

    Ford, J.J.; Ledwich, G. [School of Engineering Systems, Queensland University of Technology, Brisbane, Qld 4001 (Australia); Bevrani, H. [Department of Electrical and Computer Engineering, University of Kurdistan Sanandaj, Kurdistan (Iran)

    2009-11-15

    The requirement for improved efficiency whilst maintaining system security necessitates the development of improved system analysis approaches and the development of advanced emergency control technologies. Load shedding is a type of emergency control that is designed to ensure system stability by curtailing system load to match generation supply. This paper presents a new adaptive load shedding scheme that provides emergency protection against excess frequency decline, whilst minimizing the risk of line overloading. The proposed load shedding scheme uses the local frequency rate information to adapt the load shedding behaviour to suit the size and location of the experienced disturbance. The proposed scheme is tested in simulation on a 3-region, 10-generator sample system and shows good performance. (author)

  17. Load-balancing algorithms for climate models

    Energy Technology Data Exchange (ETDEWEB)

    Foster, I.T.; Toonen, B.R.

    1994-06-01

    Implementations of climate models on scalable parallel computer systems can suffer from load imbalances due to temporal and spatial variations in the amount of computation required for physical parameterizations such as solar radiation and convective adjustment. We have developed specialized techniques for correcting such imbalances. These techniques are incorporated in a general-purpose, programmable load-balancing library that allows the mapping of computation to processors to be specified as a series of maps generated by a programmer-supplied load-balancing module. The communication required to move from one map to another is performed automatically by the library, without programmer intervention. In this paper, we de scribe the load-balancing problem and the techniques that we have developed to solve it. We also describe specific load-balancing algorithms that we have developed for PCCM2, a scalable parallel implementation of the community Climate Model, and present experimental results that demonstrate the effectiveness of these algorithms on parallel computers.

  18. Load-balancing algorithms for climate models

    Science.gov (United States)

    Foster, I. T.; Toonen, B. R.

    Implementations of climate models on scalable parallel computer systems can suffer from load imbalances due to temporal and spatial variations in the amount of computation required for physical parameterizations such as solar radiation and convective adjustment. We have developed specialized techniques for correcting such imbalances. These techniques are incorporated in a general-purpose, programmable load-balancing library that allows the mapping of computation to processors to be specified as a series of maps generated by a programmer-supplied load-balancing module. The communication required to move from one map to another is performed automatically by the library, without programmer intervention. In this paper, we describe the load-balancing problem and the techniques that we have developed to solve it. We also describe specific load-balancing algorithms that we have developed for PCCM2, a scalable parallel implementation of the community climate model, and present experimental results that demonstrate the effectiveness of these algorithms on parallel computers.

  19. Modeling of Generic Slung Load System

    DEFF Research Database (Denmark)

    Bisgaard, Morten; Bendtsen, Jan Dimon; la Cour-Harbo, Anders

    2009-01-01

    This paper presents the result of the modelling and verification of a generic slung load system using a small-scale helicopter. The model is intended for use in simulation, pilot training, estimation, and control. The model is derived using a redundant coordinate formulation based on Gauss......' Principle of Least Constraint using the Udwadia-Kalaba equation and can be used to model all body to body slung load suspension types. The model provides intuitive and easy-to-use means of modelling and simulating different slung load suspension types. It includes detection of, and response to, wire...... slackening and tightening as well as aerodynamic coupling between the helicopter and the load. Furthermore, it is shown how the model can be easily used for multi-lift systems either with multiple helicopters or multiple loads. A numerical stabilisation algorithm is introduced and finally the use...

  20. Handball load and shoulder injury rate

    DEFF Research Database (Denmark)

    Møller, M; Nielsen, R O; Attermann, J

    2017-01-01

    Background Knowledge of injury patterns, an essential step towards injury prevention, is lacking in youth handball. Aim To investigate if an increase in handball load is associated with increased shoulder injury rates compared with a minor increase or decrease, and if an association is influenced...... by scapular control, isometric shoulder strength or glenohumeral range of motion (ROM). Methods 679 players (14-18 years) provided weekly reports on shoulder injury and handball load (training and competition hours) over 31 weeks using the SMS, phone and medical examination system. Handball load in a given...... was performed at baseline and midseason. Results An increase in handball load by >60% was associated with greater shoulder injury rate (HR 1.91; 95% CI 1.00 to 3.70, p=0.05) compared with the reference group. The effect of an increase in handball load between 20% and 60% was exacerbated among players...

  1. Simulation of Stochastic Loads for Fatigue Experiments

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Brincker, Rune

    1989-01-01

    A simple direct simulation method for stochastic fatigue-load generation is described in this paper. The simulation method is based on the assumption that only the peaks of the load process significantly affect the fatigue life. The method requires the conditional distribution functions of load...... process by a Markov process. Two different spectra from two tubular joints in an offshore structure (one narrow banded and one wide banded) are considered in an example. The results show that the simple direct method is quite efficient and results in a simulation speed of about 3000 load cycles per second...... ranges given the last peak values. Analytical estimates of these distribution functions are presented in the paper and compared with estimates based on a more accurate simulation method. In the more accurate simulation method samples at equidistant times are generated by approximating the stochastic load...

  2. Achilles and Patellar Tendinopathy Loading Programmes

    DEFF Research Database (Denmark)

    Malliaras, Peter; Barton, Christian J; Reeves, Neil D;

    2013-01-01

    INTRODUCTION: Achilles and patellar tendinopathy are overuse injuries that are common among athletes. Isolated eccentric muscle training has become the dominant conservative management strategy for Achilles and patellar tendinopathy but, in some cases, up to 45 % of patients may not respond....... Eccentric-concentric progressing to eccentric (Silbernagel combined) and eccentric-concentric isotonic (heavy-slow resistance; HSR) loading have also been investigated. In order for clinicians to make informed decisions, they need to be aware of the loading options and comparative evidence. The mechanisms...... of loading also need to be elucidated in order to focus treatment to patient deficits and refine loading programmes in future studies. OBJECTIVES: The objectives of this review are to evaluate the evidence in studies that compare two or more loading programmes in Achilles and patellar tendinopathy...

  3. High power s-band vacuum load

    Energy Technology Data Exchange (ETDEWEB)

    Neubauer, Michael [Muons, Inc., Batavia, IL (United States); Dudas, Alan [Muons, Inc., Batavia, IL (United States); Krasnykh, Anatoly [SLAC National Accelerator Lab., Menlo Park, CA (United States)

    2016-12-29

    Through a combination of experimentation and calculation the components of a novel room temperature dry load were successfully fabricated. These components included lossy ceramic cylinders of various lengths, thicknesses, and percent of silicon carbide (SiC). The cylinders were then assembled into stainless steel compression rings by differential heating of the parts and a special fixture. Post machining of this assembly provided a means for a final weld. The ring assemblies were then measured for S-parameters, individually and in pairs using a low-cost TE10 rectangular to TE01 circular waveguide adapter specially designed to be part of the final load assembly. Matched pairs of rings were measured for assembly into the final load and a sliding short designed and fabricated to assist in determining the desired short location in the final assembly. The plan for the project was for Muons, Inc. to produce prototype loads for long-term testing at SLAC. The STTR funds for SLAC were to upgrade and operate their test station to ensure that the loads would satisfy their requirements. Phase III was to be the sale to SLAC of loads that Muons, Inc. would manufacture. However, an alternate solution that involved a rebuild of the old loads, reduced SLAC budget projections, and a relaxed time for the replacement of all loads meant that in-house labor will be used to do the upgrade without the need for the loads developed in this project. Consequently, the project was terminated before the long term testing was initiated. However, SLAC can use the upgraded test stand to compare the long-term performance of the ones produced in this project with their rebuilt loads when they are available.

  4. Quantifying Training Loads in Contemporary Dance.

    Science.gov (United States)

    Jeffries, Annie C; Wallace, Lee; Coutts, Aaron J

    2017-07-01

    To describe the training demands of contemporary dance and determine the validity of using the session rating of perceived exertion (sRPE) to monitor exercise intensity and training load in this activity. In addition, the authors examined the contribution of training (ie, accelerometry and heart rate) and non-training-related factors (ie, sleep and wellness) to perceived exertion during dance training. Training load and ActiGraphy for 16 elite amateur contemporary dancers were collected during a 49-d period, using heart-rate monitors, accelerometry, and sRPE. Within-individual correlation analysis was used to determine relationships between sRPE and several other measures of training intensity and load. Stepwise multiple regressions were used to determine a predictive equation to estimate sRPE during dance training. Average weekly training load was 4283 ± 2442 arbitrary units (AU), monotony 2.13 ± 0.92 AU, strain 10677 ± 9438 AU, and average weekly vector magnitude load 1809,707 ± 1015,402 AU. There were large to very large within-individual correlations between training-load sRPE and various other internal and external measures of intensity and load. The stepwise multiple-regression analysis also revealed that 49.7% of the adjusted variance in training-load sRPE was explained by peak heart rate, metabolic equivalents, soreness, motivation, and sleep quality (y = -4.637 + 13.817%HRpeak + 0.316 METS + 0.100 soreness + 0.116 motivation - 0.204 sleep quality). The current findings demonstrate the validity of the sRPE method for quantifying training load in dance, that dancers undertake very high training loads, and a combination of training and nontraining factors contribute to perceived exertion in dance training.

  5. USING BENCH PRESS LOAD TO PREDICT UPPER BODY EXERCISE LOADS IN PHYSICALLY ACTIVE INDIVIDUALS

    Directory of Open Access Journals (Sweden)

    Del P. Wong

    2013-03-01

    Full Text Available This study investigated whether loads for assistance exercises of the upper body can be predicted from the loads of the bench press exercise. Twenty-nine physically active collegiate students (age: 22.6 ± 2.5; weight training experience: 2.9 ± 2.1 years; estimated 1RM bench press: 54.31 ± 14.60 kg; 1RM: body weight ratio: 0.80 ± 0.22; BMI: 22.7 ± 2.1 kg·m-2 were recruited. The 6RM loads for bench press, barbell bicep curl, overhead dumbbell triceps extension, hammer curl and dumbbell shoulder press were measured. Test-retest reliability for the 5 exercises as determined by Pearson product moment correlation coefficient was very high to nearly perfect (0.82-0.98, p < 0.01. The bench press load was significantly correlated with the loads of the 4 assistance exercises (r ranged from 0.80 to 0.93, p < 0.01. Linear regression revealed that the bench press load was a significant (R2 range from 0.64 to 0.86, p < 0.01 predictor for the loads of the 4 assistance exercises. The following 6RM prediction equations were determined: (a Hammer curl = Bench press load (0.28 + 6.30 kg, (b Barbell biceps curl = Bench press load (0.33 + 6.20 kg, (c Overhead triceps extension = Bench press load (0.33 - 0.60 kg, and (d Dumbbell shoulder press = Bench press load (0.42 + 5.84 kg. The difference between the actual load and the predicted load using the four equations ranged between 6.52% and 8.54%, such difference was not significant. Fitness professionals can use the 6RM bench press load as a time effective and accurate method to predict training loads for upper body assistance exercises.

  6. Using bench press load to predict upper body exercise loads in physically active individuals.

    Science.gov (United States)

    Wong, Del P; Ngo, Kwan-Lung; Tse, Michael A; Smith, Andrew W

    2013-01-01

    This study investigated whether loads for assistance exercises of the upper body can be predicted from the loads of the bench press exercise. Twenty-nine physically active collegiate students (age: 22.6 ± 2.5; weight training experience: 2.9 ± 2.1 years; estimated 1RM bench press: 54.31 ± 14.60 kg; 1RM: body weight ratio: 0.80 ± 0.22; BMI: 22.7 ± 2.1 kg·m(-2)) were recruited. The 6RM loads for bench press, barbell bicep curl, overhead dumbbell triceps extension, hammer curl and dumbbell shoulder press were measured. Test-retest reliability for the 5 exercises as determined by Pearson product moment correlation coefficient was very high to nearly perfect (0.82-0.98, p press load was significantly correlated with the loads of the 4 assistance exercises (r ranged from 0.80 to 0.93, p press load was a significant (R(2) range from 0.64 to 0.86, p press load (0.28) + 6.30 kg, (b) Barbell biceps curl = Bench press load (0.33) + 6.20 kg, (c) Overhead triceps extension = Bench press load (0.33) - 0.60 kg, and (d) Dumbbell shoulder press = Bench press load (0.42) + 5.84 kg. The difference between the actual load and the predicted load using the four equations ranged between 6.52% and 8.54%, such difference was not significant. Fitness professionals can use the 6RM bench press load as a time effective and accurate method to predict training loads for upper body assistance exercises. Key pointsThe bench press load was significantly correlated with the loads of the 4 assistance exercises.No significant differences were found between the actual load and the predicted load in the four equations.6RM bench press load can be a time effective and accurate method to predict training loads for upper body assistance exercises.

  7. Contact analysis and load distribution of double-envelop hourglassworm gearing affected by errors and load

    Institute of Scientific and Technical Information of China (English)

    XU Wujiao; QIN Datong; SHI Wankai

    2003-01-01

    An approach for the contact analysis and load distribution of double-envelop hourglass worm gearing is presented,which is based on a 3-D elastic contact finite element method (FEM) model that 3ccommodates the influence of errors and load.As compared with existing tooth contact analysis model that assumes rigidity for the contacting surfaces, the proposed model provides a more realistic analysis on the contact patterns, the distribution of contact load and transmission errors. It is also capable of exploring the influence of different errors on meshing performances, the contact deformation, the shift of the contact zone and load share among the meshing tooth-pairs under different load.

  8. Heat Load Estimator for Smoothing Pulsed Heat Loads on Supercritical Helium Loops

    Science.gov (United States)

    Hoa, C.; Lagier, B.; Rousset, B.; Bonnay, P.; Michel, F.

    Superconducting magnets for fusion are subjected to large variations of heat loads due to cycling operation of tokamaks. The cryogenic system shall operate smoothly to extract the pulsed heat loads by circulating supercritical helium into the coils and structures. However the value of the total heat loads and its temporal variation are not known before the plasma scenario starts. A real-time heat load estimator is of interest for the process control of the cryogenic system in order to anticipate the arrival of pulsed heat loads to the refrigerator and finally to optimize the operation of the cryogenic system. The large variation of the thermal loads affects the physical parameters of the supercritical helium loop (pressure, temperature, mass flow) so those signals can be used for calculating instantaneously the loads deposited into the loop. The methodology and algorithm are addressed in the article for estimating the heat load deposition before it reaches the refrigerator. The CEA patented process control has been implemented in a Programmable Logic Controller (PLC) and has been successfully validated on the HELIOS test facility at CEA Grenoble. This heat load estimator is complementary to pulsed load smoothing strategies providing an estimation of the optimized refrigeration power. It can also effectively improve the process control during the transient between different operating modes by adjusting the refrigeration power to the need. This way, the heat load estimator participates to the safe operation of the cryogenic system.

  9. Peak load arrangements : Assessment of Nordel guidelines

    Energy Technology Data Exchange (ETDEWEB)

    2009-07-01

    Two Nordic countries, Sweden and Finland, have legislation that empowers the TSO to acquire designated peak load resources to mitigate the risk for shortage situations during the winter. In Denmark, the system operator procures resources to maintain a satisfactory level of security of supply. In Norway the TSO has set up a Regulation Power Option Market (RKOM) to secure a satisfactory level of operational reserves at all times, also in winter with high load demand. Only the arrangements in Finland and Sweden fall under the heading of Peak Load Arrangements defined in Nordel Guidelines. NordREG has been invited by the Electricity Market Group (EMG) to evaluate Nordel's proposal for 'Guidelines for transitional Peak Load Arrangements'. The EMG has also financed a study made by EC Group to support NordREG in the evaluation of the proposal. The study has been taken into account in NordREG's evaluation. In parallel to the EMG task, the Swedish regulator, the Energy Markets Inspectorate, has been given the task by the Swedish government to investigate a long term solution of the peak load issue. The Swedish and Finnish TSOs have together with Nord Pool Spot worked on finding a harmonized solution for activation of the peak load reserves in the market. An agreement accepted by the relevant authorities was reached in early January 2009, and the arrangement has been implemented since 19th January 2009. NordREG views that the proposed Nordel guidelines have served as a starting point for the presently agreed procedure. However, NordREG does not see any need to further develop the Nordel guidelines for peak load arrangements. NordREG agrees with Nordel that the market should be designed to solve peak load problems through proper incentives to market players. NordREG presumes that the relevant authorities in each country will take decisions on the need for any peak load arrangement to ensure security of supply. NordREG proposes that such decisions should be

  10. Electricity Crisis and Load Management in Bangladesh

    Directory of Open Access Journals (Sweden)

    Rajib Kanti Das

    2012-09-01

    Full Text Available Bangladesh is a densely populated country. Only a small part of her area is electrified which cover around 18% of total population. The people who are in the electrified area are suffering from severe load shedding. A systematic load management procedure related to demand side may improve the situation is the research problem. The major objectives serve by the research are to analyze contemporary electricity status with a view to drawing inference about demand supply gap and extracting benefits from load management. Data supplied by the Bangladesh Power Development Board, World Bank and outcome of survey are analyzed with some simple statistical tools to test the hypothesis. Analysis discloses that with properly managed uses of electricity with load switch and rotation week-end can improve the concurrent condition of electricity. Moreover, introducing smart distribution system, reducing system loss, shifting load to off-peak, large scale use of prepaid mete, observing energy week and using energy efficient home and office appliance are recommended to improve load through demand side management. Some other recommendations such as introducing alternative energy, public private partnership and using renewable energy development and producing energy locally are made for load management from the supply side.

  11. Variable Current Transient Beam Loading Compensation

    Energy Technology Data Exchange (ETDEWEB)

    Farkas, Zoltan D

    2000-10-25

    The energy spread caused by transients during beam turn-on can be reduced by suitable timing of the beam turn-on[1]. If the beam is injected when the no-load voltage reaches the desired loaded voltage, then the energy spread is about 10%. To eliminate this energy spread, one can amplitude or phase modulate the section input power for one fill time, so that when the beam is turned on, the no-load voltage equals the desired loaded voltage and from then on, the change in no-load voltage tracks the beam induced voltage. It is known that for a constant gradient (CG) structure, and amplitude variation of the form E(t) = a{sub 0} + (1 - a{sub 0}) t{sub p} will reduce the energy spread to zero for a current that is determined by a{sub 0}. When one uses rf modulation for transient beam loading compensation, the beam is injected a fill time after the rf has been turned on, and one is forced to throw away a section's worth of rf energy. In addition, it requires extra components which use up additional rf energy. This note describes transient beam loading compensation with variable current. It will show that it increases the rf energy to beam energy transfer efficiency.

  12. Citraturic response to oral citric acid load

    Science.gov (United States)

    Sakhaee, K.; Alpern, R.; Poindexter, J.; Pak, C. Y.

    1992-01-01

    It is possible that some orally administered citrate may appear in urine by escaping oxidation in vivo. To determine whether this mechanism contributes to the citraturic response to potassium citrate, we measured serum and urinary citrate for 4 hours after a single oral load of citric acid (40 mEq.) in 6 normal subjects. Since citric acid does not alter acid-base balance, the effect of absorbed citrate could be isolated from that of alkali load. Serum citrate concentration increased significantly (p less than 0.05) 30 minutes after a single oral dose of citric acid and remained significantly elevated for 3 hours after citric acid load. Commensurate with this change, urinary citrate excretion peaked at 2 hours and gradually decreased during the next 2 hours after citric acid load. In contrast, serum and urinary citrate remained unaltered following the control load (no drug). Differences of the citratemic and citraturic effects between phases were significant (p less than 0.05) at 2 and 3 hours. Urinary pH, carbon dioxide pressure, bicarbonate, total carbon dioxide and ammonium did not change at any time after citric acid load, and did not differ between the 2 phases. No significant difference was noted in serum electrolytes, arterialized venous pH and carbon dioxide pressure at any time after citric acid load and between the 2 phases. Thus, the citraturic and citratemic effects of oral citric acid are largely accountable by provision of absorbed citrate, which has escaped in vivo degradation.

  13. Visual perceptual load induces inattentional deafness.

    Science.gov (United States)

    Macdonald, James S P; Lavie, Nilli

    2011-08-01

    In this article, we establish a new phenomenon of "inattentional deafness" and highlight the level of load on visual attention as a critical determinant of this phenomenon. In three experiments, we modified an inattentional blindness paradigm to assess inattentional deafness. Participants made either a low- or high-load visual discrimination concerning a cross shape (respectively, a discrimination of line color or of line length with a subtle length difference). A brief pure tone was presented simultaneously with the visual task display on a final trial. Failures to notice the presence of this tone (i.e., inattentional deafness) reached a rate of 79% in the high-visual-load condition, significantly more than in the low-load condition. These findings establish the phenomenon of inattentional deafness under visual load, thereby extending the load theory of attention (e.g., Lavie, Journal of Experimental Psychology. Human Perception and Performance, 25, 596-616, 1995) to address the cross-modal effects of visual perceptual load.

  14. Standardized Loads Acting in Knee Implants

    Science.gov (United States)

    Bergmann, Georg; Bender, Alwina; Graichen, Friedmar; Dymke, Jörn; Rohlmann, Antonius; Trepczynski, Adam; Heller, Markus O.; Kutzner, Ines

    2014-01-01

    The loads acting in knee joints must be known for improving joint replacement, surgical procedures, physiotherapy, biomechanical computer simulations, and to advise patients with osteoarthritis or fractures about what activities to avoid. Such data would also allow verification of test standards for knee implants. This work analyzes data from 8 subjects with instrumented knee implants, which allowed measuring the contact forces and moments acting in the joint. The implants were powered inductively and the loads transmitted at radio frequency. The time courses of forces and moments during walking, stair climbing, and 6 more activities were averaged for subjects with I) average body weight and average load levels and II) high body weight and high load levels. During all investigated activities except jogging, the high force levels reached 3,372–4,218N. During slow jogging, they were up to 5,165N. The peak torque around the implant stem during walking was 10.5 Nm, which was higher than during all other activities including jogging. The transverse forces and the moments varied greatly between the subjects, especially during non-cyclic activities. The high load levels measured were mostly above those defined in the wear test ISO 14243. The loads defined in the ISO test standard should be adapted to the levels reported here. The new data will allow realistic investigations and improvements of joint replacement, surgical procedures for tendon repair, treatment of fractures, and others. Computer models of the load conditions in the lower extremities will become more realistic if the new data is used as a gold standard. However, due to the extreme individual variations of some load components, even the reported average load profiles can most likely not explain every failure of an implant or a surgical procedure. PMID:24465856

  15. Factor structure underlying components of allostatic load.

    Directory of Open Access Journals (Sweden)

    Jeanne M McCaffery

    Full Text Available Allostatic load is a commonly used metric of health risk based on the hypothesis that recurrent exposure to environmental demands (e.g., stress engenders a progressive dysregulation of multiple physiological systems. Prominent indicators of response to environmental challenges, such as stress-related hormones, sympatho-vagal balance, or inflammatory cytokines, comprise primary allostatic mediators. Secondary mediators reflect ensuing biological alterations that accumulate over time and confer risk for clinical disease but overlap substantially with a second metric of health risk, the metabolic syndrome. Whether allostatic load mediators covary and thus warrant treatment as a unitary construct remains to be established and, in particular, the relation of allostatic load parameters to the metabolic syndrome requires elucidation. Here, we employ confirmatory factor analysis to test: 1 whether a single common factor underlies variation in physiological systems associated with allostatic load; and 2 whether allostatic load parameters continue to load on a single common factor if a second factor representing the metabolic syndrome is also modeled. Participants were 645 adults from Allegheny County, PA (30-54 years old, 82% non-Hispanic white, 52% female who were free of confounding medications. Model fitting supported a single, second-order factor underlying variance in the allostatic load components available in this study (metabolic, inflammatory and vagal measures. Further, this common factor reflecting covariation among allostatic load components persisted when a latent factor representing metabolic syndrome facets was conjointly modeled. Overall, this study provides novel evidence that the modeled allostatic load components do share common variance as hypothesized. Moreover, the common variance suggests the existence of statistical coherence above and beyond that attributable to the metabolic syndrome.

  16. Standardized loads acting in knee implants.

    Science.gov (United States)

    Bergmann, Georg; Bender, Alwina; Graichen, Friedmar; Dymke, Jörn; Rohlmann, Antonius; Trepczynski, Adam; Heller, Markus O; Kutzner, Ines

    2014-01-01

    The loads acting in knee joints must be known for improving joint replacement, surgical procedures, physiotherapy, biomechanical computer simulations, and to advise patients with osteoarthritis or fractures about what activities to avoid. Such data would also allow verification of test standards for knee implants. This work analyzes data from 8 subjects with instrumented knee implants, which allowed measuring the contact forces and moments acting in the joint. The implants were powered inductively and the loads transmitted at radio frequency. The time courses of forces and moments during walking, stair climbing, and 6 more activities were averaged for subjects with I) average body weight and average load levels and II) high body weight and high load levels. During all investigated activities except jogging, the high force levels reached 3,372-4,218N. During slow jogging, they were up to 5,165N. The peak torque around the implant stem during walking was 10.5 Nm, which was higher than during all other activities including jogging. The transverse forces and the moments varied greatly between the subjects, especially during non-cyclic activities. The high load levels measured were mostly above those defined in the wear test ISO 14243. The loads defined in the ISO test standard should be adapted to the levels reported here. The new data will allow realistic investigations and improvements of joint replacement, surgical procedures for tendon repair, treatment of fractures, and others. Computer models of the load conditions in the lower extremities will become more realistic if the new data is used as a gold standard. However, due to the extreme individual variations of some load components, even the reported average load profiles can most likely not explain every failure of an implant or a surgical procedure.

  17. Standardized loads acting in knee implants.

    Directory of Open Access Journals (Sweden)

    Georg Bergmann

    Full Text Available The loads acting in knee joints must be known for improving joint replacement, surgical procedures, physiotherapy, biomechanical computer simulations, and to advise patients with osteoarthritis or fractures about what activities to avoid. Such data would also allow verification of test standards for knee implants. This work analyzes data from 8 subjects with instrumented knee implants, which allowed measuring the contact forces and moments acting in the joint. The implants were powered inductively and the loads transmitted at radio frequency. The time courses of forces and moments during walking, stair climbing, and 6 more activities were averaged for subjects with I average body weight and average load levels and II high body weight and high load levels. During all investigated activities except jogging, the high force levels reached 3,372-4,218N. During slow jogging, they were up to 5,165N. The peak torque around the implant stem during walking was 10.5 Nm, which was higher than during all other activities including jogging. The transverse forces and the moments varied greatly between the subjects, especially during non-cyclic activities. The high load levels measured were mostly above those defined in the wear test ISO 14243. The loads defined in the ISO test standard should be adapted to the levels reported here. The new data will allow realistic investigations and improvements of joint replacement, surgical procedures for tendon repair, treatment of fractures, and others. Computer models of the load conditions in the lower extremities will become more realistic if the new data is used as a gold standard. However, due to the extreme individual variations of some load components, even the reported average load profiles can most likely not explain every failure of an implant or a surgical procedure.

  18. A combined loading system integrated with portable winch and polyethylene chutes for loading of timber products

    Directory of Open Access Journals (Sweden)

    H. Hulusi Acar

    2016-01-01

    Full Text Available Truck loading operation is an important task during timber production operations in forestry. In Turkey, approximately 50 million timbers/logs are being produced per year, and then they are loaded into the logging trucks. The timber/logs are transported over the forest roads with an average of one million roundtrips. However, the traditional loading methods using manpower are mostly performed while some part is done by using loading machines which can be very costly and risky. This study aims developing a combined loading system in which heavy logs are loaded into logging trucks by pulling them by a log-line powered by a portable crane within the chute system. The slope of the log-line from ground to logging truck varied between 1% and 25%. Within the each work cycle of loading operation, only one log was loaded by pulling with portable crane. The average loading time was found as 161.8 seconds per cycle, in which 67% of the time was spent on pulling the log into the logging truck. The results indicated that the average pulling speed with crane power was 840.4 m/hr and productivity was calculated as 4.94 m3/hr. The result on system speed and productivity indicated close relations with results from previous studies. The hydraulic grapple loader or cranes are widely used and common loading machines, but they cannot be efficiently used in forestry operations, especially ones having a low timber productivity rate or having low economic value timber. In these conditions, loading methods that are cost efficient and do not require higher production rate should be employed. Therefore, a combined loading system introduced in this study can be a feasible solution for loading operations in those cases. Furthermore, it is believed that this loading system integrated with a portable crane can be cost efficient and time saving solution, as well as ergonomic and safe method in the field.

  19. Fe3O4 nanoparticle loaded paclitaxel induce multiple myeloma apoptosis by cell cycle arrest and increase cleavage of caspases in vitro

    Science.gov (United States)

    Yang, Cuiping; He, Xiangfeng; Chen, Junsong; Chen, Dengyu; Liu, Yunjing; Xiong, Fei; Shi, Fangfang; Dou, Jun; Gu, Ning

    2013-08-01

    Multiple myeloma (MM) still remains an incurable disease in spite of extending the patient survival by new therapies. The hypothesis of cancer stem cells (CSCs) states that although chemotherapy kills most tumor cells, it is believed to leave a reservoir of CSCs that allows the tumor cell propagation. The objective of this research was to evaluate the therapeutic effect of new paclitaxel-Fe3O4 nanoparticles (PTX-NPs) with an average size range of 7.17 ± 1.31 nm on MM CSCs in vitro. The characteristics of CD138-CD34- cells, isolated from human MM RPMI 8226 and NCI-H929 cell lines by the magnetic associated cell sorting method, were identified by the assays of colony formation, cell proliferation, drug resistance, cell migration, and tumorigenicity in non-obese diabetic/severe combined immunodeficiency (NOD/SCID) mice, respectively. Inhibitory effects of PTX-NPs on CD138-CD34- cells were evaluated by a variety of assays in vitro. The results showed that the CD138-CD34- cells were capable of forming colonies, exhibited high proliferative and migratory ability, possessed a strong drug resistance, and had powerful tumorigenicity in NOD/SCID mice compared to non-CD138-CD34- cells. PTX-NPs significantly inhibited CD138- CD34- cell viability and invasive ability, and resulted in G0/G1 cell cycle arrest and apoptosis compared with PTX alone. We concluded that the CD138-CD34- phenotype cells might be CSCs in RPMI 8226 and NCI-H929 cell lines. PTX-NPs had an obvious inhibitory effect on MM CD138-CD34- CSCs. The findings may provide a guideline for PTX-NPs' treatment of MM CSCs in preclinical investigation.

  20. Fe{sub 3}O{sub 4} nanoparticle loaded paclitaxel induce multiple myeloma apoptosis by cell cycle arrest and increase cleavage of caspases in vitro

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Cuiping [Medical School, Southeast University, Department of Pathogenic Biology and Immunology (China); He, Xiangfeng [Affiliated Tumor Hospital of Nantong University, Department of Medical Oncology (China); Chen, Junsong; Chen, Dengyu; Liu, Yunjing [Medical School, Southeast University, Department of Pathogenic Biology and Immunology (China); Xiong, Fei [Southeast University, School of Biological Science and Medical Engineering (China); Shi, Fangfang [Zhongda Hospital, Southeast University, Department of Oncology (China); Dou, Jun, E-mail: njdoujun@yahoo.com.cn [Medical School, Southeast University, Department of Pathogenic Biology and Immunology (China); Gu, Ning, E-mail: guning@seu.edu.cn [Southeast University, School of Biological Science and Medical Engineering (China)

    2013-08-15

    Multiple myeloma (MM) still remains an incurable disease in spite of extending the patient survival by new therapies. The hypothesis of cancer stem cells (CSCs) states that although chemotherapy kills most tumor cells, it is believed to leave a reservoir of CSCs that allows the tumor cell propagation. The objective of this research was to evaluate the therapeutic effect of new paclitaxel-Fe{sub 3}O{sub 4} nanoparticles (PTX-NPs) with an average size range of 7.17 {+-} 1.31 nm on MM CSCs in vitro. The characteristics of CD138{sup -}CD34{sup -} cells, isolated from human MM RPMI 8226 and NCI-H929 cell lines by the magnetic associated cell sorting method, were identified by the assays of colony formation, cell proliferation, drug resistance, cell migration, and tumorigenicity in non-obese diabetic/severe combined immunodeficiency (NOD/SCID) mice, respectively. Inhibitory effects of PTX-NPs on CD138{sup -}CD34{sup -} cells were evaluated by a variety of assays in vitro. The results showed that the CD138{sup -}CD34{sup -} cells were capable of forming colonies, exhibited high proliferative and migratory ability, possessed a strong drug resistance, and had powerful tumorigenicity in NOD/SCID mice compared to non-CD138{sup -}CD34{sup -} cells. PTX-NPs significantly inhibited CD138{sup -} CD34{sup -} cell viability and invasive ability, and resulted in G0/G1 cell cycle arrest and apoptosis compared with PTX alone. We concluded that the CD138{sup -}CD34{sup -} phenotype cells might be CSCs in RPMI 8226 and NCI-H929 cell lines. PTX-NPs had an obvious inhibitory effect on MM CD138{sup -}CD34{sup -} CSCs. The findings may provide a guideline for PTX-NPs' treatment of MM CSCs in preclinical investigation.

  1. Load Estimation by Frequency Domain Decomposition

    DEFF Research Database (Denmark)

    Pedersen, Ivar Chr. Bjerg; Hansen, Søren Mosegaard; Brincker, Rune;

    2007-01-01

    When performing operational modal analysis the dynamic loading is unknown, however, once the modal properties of the structure have been estimated, the transfer matrix can be obtained, and the loading can be estimated by inverse filtering. In this paper loads in frequency domain are estimated...... by analysis of simulated responses of a 4 DOF system, for which the exact modal parameters are known. This estimation approach entails modal identification of the natural eigenfrequencies, mode shapes and damping ratios by the frequency domain decomposition technique. Scaled mode shapes are determined by use...

  2. Modelling and Simulation of Wave Loads

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Thoft-Christensen, Palle

    A simple model of the wave load on slender members of offshore structures is described. The wave elevation of the sea state is modelled by a stationary Gaussian process. A new procedure to simulate realizations of the wave loads is developed. The simulation method assumes that the wave particle...... velocity can be approximated by a Gaussian Markov process. Known approximate results for the first-passage density or equivalently, the distribution of the extremes of wave loads are presented and compared with rather precise simulation results. It is demonstrated that the approximate results...

  3. Modelling and Simulation of Wave Loads

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Thoft-Christensen, Palle

    1985-01-01

    A simple model of the wave load on stender members of offshore structures is described . The wave elevation of the sea stateis modelled by a stationary Gaussian process. A new procedure to simulate realizations of the wave loads is developed. The simulation method assumes that the wave particle...... velocity can be approximated by a Gaussian Markov process. Known approximate results for the first passage density or equivalently, the distribution of the extremes of wave loads are presented and compared with rather precise simulation results. It is demonstrated that the approximate results...

  4. Load-Bearing Capacity of Roof Trusses

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Damkilde, Lars; Munch-Andersen, J.

    2004-01-01

    systems such as roof trusses are established and statistical characteristics of the load bearing capacity are determined. The results show that there is a significant increase in the characteristic (nominal) value and a reduction in the coefficient of variation (COV) for typical loads such as permanent......-sections with low strength and stiffness will generally not have large load effects. Further, there can be system effects due to non-linear material behavior. In this paper a stochastic model is established for the bending strength and stiffness of timber beams. Next, stochastic models for typical timber structural...

  5. Wind turbine blade testing under combined loading

    DEFF Research Database (Denmark)

    Roczek-Sieradzan, Agnieszka; Nielsen, Magda; Branner, Kim;

    2011-01-01

    The paper presents full-scale blade tests under a combined flap- and edgewise loading. The main aim of this paper is to present the results from testing a wind turbine blade under such conditions and to study the structural behavior of the blade subjected to combined loading. A loading method using...... anchor plates was applied, allowing transverse shear distortion. The global and local deformation of the blade as well as the reproducibility of the test was studied and the results from the investigations are presented....

  6. The global atmospheric loading of dust aerosols

    Science.gov (United States)

    Kok, J. F.; Ridley, D. A.; Haustein, K.; Miller, R. L.; Zhao, C.

    2015-12-01

    Mineral dust is one of the most ubiquitous aerosols in the atmosphere, with important effects on human health and the climate system. But despite its importance, the global atmospheric loading of dust has remained uncertain, with model results spanning about a factor of five. Here we constrain the particle size-resolved atmospheric dust loading and global emission rate, using a novel theoretical framework that uses experimental constraints on the optical properties and size distribution of dust to eliminate climate model errors due to assumed dust properties. We find that most climate models underestimate the global atmospheric loading and emission rate of dust aerosols.

  7. Synthesis of polyoxometalate-loaded epoxy composites

    Science.gov (United States)

    Anderson, Benjamin J

    2014-10-07

    The synthesis of a polyoxometalate-loaded epoxy uses a one-step cure by applying an external stimulus to release the acid from the polyoxometalate and thereby catalyze the cure reaction of the epoxy resin. Such polyoxometalate-loaded epoxy composites afford the cured epoxy unique properties imparted by the intrinsic properties of the polyoxometalate. For example, polyoxometalate-loaded epoxy composites can be used as corrosion resistant epoxy coatings, for encapsulation of electronics with improved dielectric properties, and for structural applications with improved mechanical properties.

  8. Acoustic loading effects on oscillating rod bundles

    Energy Technology Data Exchange (ETDEWEB)

    Lin, W.H.

    1980-01-01

    An analytical study of the interaction between an infinite acoustic medium and a cluster of circular rods is described. The acoustic field due to oscillating rods and the acoustic loading on the rods are first solved in a closed form. The acoustic loading is then used as a forcing function for rod responses, and the acousto-elastic couplings are solved simultaneously. Numerical examples are presented for several cases to illustrate the effects of various system parameters on the acoustic reaction force coefficients. The effect of the acoustic loading on the coupled eigenfrequencies are discussed.

  9. Economic Load Dispatch Using Grey Wolf Optimization

    Directory of Open Access Journals (Sweden)

    Dr.Sudhir Sharma

    2015-04-01

    Full Text Available This paper presents grey wolf optimization (GWO to solve convex economic load dispatch (ELD problem. Grey Wolf Optimization (GWO is a new meta-heuristic inspired by grey wolves. The leadership hierarchy and hunting mechanism of the grey wolves is mimicked in GWO. The objective of ELD problem is to minimize the total generation cost while fulfilling the different constraints, when the required load of power system is being supplied. The proposed technique is implemented on two different test systems for solving the ELD with various load demands. To show the effectiveness of GWO to solve ELD problem results were compared with other existing techniques.

  10. Modelling of Generic Slung Load System

    DEFF Research Database (Denmark)

    Bisgaard, Morten; Bendtsen, Jan Dimon; La Cour-Harbo, Anders

    2006-01-01

    of Least Constraint using the Udwadia-Kalaba equation and can be used to model all body to body slung load suspension types. The model gives an intuitive and easy-to-use way of modelling and simulating di erent slung load suspension types and it includes detection and response of wire slacking......This paper presents the result of modelling and verification of a generic slung load system using a small-scale helicopter. The model is intended for use in simulation, pilot training, estimation, and control. The model is derived using a redundant coordinate formulation based on Gauss Principle...

  11. Strength of concrete structures under dynamic loading

    Energy Technology Data Exchange (ETDEWEB)

    Kumpyak, O. G., E-mail: ogkumpyak@yandex.ru; Galyautdinov, Z. R., E-mail: gazr@yandex.ru; Kokorin, D. N., E-mail: kokorindenn@yandex.ru [Tomsk State University of Architecture and Building, 2, Solyanaya Sq., 634003, Tomsk (Russian Federation)

    2016-01-15

    The use of elastic supports is one the efficient methods of decreasing the dynamic loading. The paper describes the influence of elastic supports on the stress-strain state of steel concrete structures exposed to one-time dynamic loading resulting in failure. Oblique bending beams on elastic supports and their elastic, elastoplastic, and elastoplastic consolidation behavior are considered in this paper. For numerical calculations the developed computer program is used based on the finite element method. Research findings prove high efficiency of elastic supports under dynamic loading conditions. The most effective behavior of elastic supports is demonstrated at the elastoplastic stage. A good agreement is observed between the theoretical and experimental results.

  12. Hyaluronic acid decorated pluronic P85 solid lipid nanoparticles as a potential carrier to overcome multidrug resistance in cervical and breast cancer.

    Science.gov (United States)

    Wang, Fang; Li, Li; Liu, Bo; Chen, Zhen; Li, Changzhong

    2017-02-01

    This work aimed to develop hyaluronic acid (HA) decorated pluronic 85 (P85) coated solid lipid nanoparticles (SLN) loaded with paclitaxel (HA-PTX-P85-SLN) and to evaluate its potential to overcome drug resistance and to increase antitumor efficacy in mice bearing cervical and breast tumor. P85-Distearoyl Phosphoethanolamine (DSPE) was synthesized from P85 and DSPE by coupling in the presence of 1,10-carbonyldiimidazole (CDI) as a catalyst. The SLN were prepared by the hot homogenization technique and electrostatic interaction. PTX-loaded SLN was characterized for mean diameter, zeta potential, morphology, entrapment efficiency (EE), drug loading capacity (LC) and in vitro drug release. In vivo animal evaluation containing antitumor effect, pharmacokinetics and biodistribution were conducted in mice bearing cervical and breast tumor. The HA-PTX-P85-SLN showed a mean diameter of 160.3nm, negative zeta potential (-31.6mV), EE of 88.2%, and LC of 4.9%. PTX from HA-PTX-P85-SLN exhibited greater sustained drug release profiles compared free PTX. Pharmacokinetics results indicated that HA-PTX-P85-SLN exhibited a 5.5-fold increase in AUC in comparison to free PTX. Biodistribution results revealed that HA-PTX-P85-SLN exhibited higher tumor drug concentration compared with free PTX.

  13. 14 CFR 25.343 - Design fuel and oil loads.

    Science.gov (United States)

    2010-01-01

    ... Design fuel and oil loads. (a) The disposable load combinations must include each fuel and oil load in the range from zero fuel and oil to the selected maximum fuel and oil load. A structural reserve fuel... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Design fuel and oil loads. 25.343...

  14. Load Theory of Selective Attention and Cognitive Control

    Science.gov (United States)

    Lavie, Nilli; Hirst, Aleksandra; de Fockert, Jan W.; Viding, Essi

    2004-01-01

    A load theory of attention in which distractor rejection depends on the level and type of load involved in current processing was tested. A series of experiments demonstrates that whereas high perceptual load reduces distractor interference, working memory load or dual-task coordination load increases distractor interference. These findings…

  15. Novel pH-sensitive polysialic acid based polymeric micelles for triggered intracellular release of hydrophobic drug.

    Science.gov (United States)

    Zhang, Wuxia; Dong, Dongqi; Li, Peng; Wang, Dongdong; Mu, Haibo; Niu, Hong; Duan, Jinyou

    2016-03-30

    Polysialic acid (PSA), a non-immunogenic and biodegradable natural polymer, is prone to hydrolysis under endo-lysosomal pH conditions. Here, we synthesized an intracellular pH-sensitive polysialic acid-ursolic acid conjugate by a condensation reaction. To further test the drug loading capability, we prepared paclitaxel-loaded polysialic acid-based amphiphilic copolymer micelle (PTX-loaded-PSAU) by a nanoprecipitation method. Results showed PTX-loaded-PSAU exhibited well-defined spherical shape and homogeneous distribution. The drug-loading was 4.5% with an entrapment efficiency of 67.5%. PTX released from PTX-loaded-PSAU was 15% and 42% in 72 h under simulated physiological condition (pH 7.4) and mild acidic conditions (pH 5.0), respectively. In addition, In vitro cytotoxicity assay showed that PTX-loaded-PSAU retained anti-tumor (SGC-7901) activity with a cell viability of 53.8% following 72 h incubation, indicating PTX-loaded-PSAU could efficiently release PTX into the tumor cells. These results indicated that the pH-responsive biodegradable PTX-loaded-PSAU possess superior extracellular stability and intracellular drug release ability. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Effect of lifting height and load mass on low back loading.

    Science.gov (United States)

    Hoozemans, Marco J M; Kingma, Idsart; de Vries, Wiebe H K; van Dieën, Jaap H

    2008-07-01

    The objective of this study was to quantify the effect of lifting height and mass lifted on the peak low back load in terms of net moments, compression forces and anterior-posterior shear forces. Ten participants had to lift a box using four handle heights. Low back loading was quantified using a dynamic 3-D linked segment model and a detailed electromyographic driven model of the trunk musculature. The effects of lifting height and lifting mass were quantified using a regression technique (GEE) for correlated data. Results indicate that an increase in lifting height and a decrease in lifting mass were related to a decrease in low back load. It is argued that trunk flexion is a major contributor to low back load. For ergonomic interventions it can be advised to prioritise optimisation of the vertical location of the load to be lifted rather than decreasing the mass of the load for handle heights between 32 cm and 155 cm, and for load masses between 7.5 and 15 kg. Lifting height and load mass are important determinants of low back load during manual materials handling. This paper provides the quantitative effect of lifting height and mass lifted, the results of which can be used by ergonomists at the workplace to evaluate interventions regarding lifting height and load mass.

  17. Catastrophe model and its experimental verification of static loading rock system under impact load

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    According to the catastrophe model for impact buckling of static loading structures, a new catastrophe model for impact loading failure of a static loading rock system was established, and one dimension (1D) catastrophe model was analyzed. The analysis results indicate that the furcation collection where catastrophe may take place is not only decided by mechanical system itself but also relates to exterior loading, which is different from the results obtained under mono-static loading where the bifurcation collection is only determined by mechanics of the system itself and has nothing to do with exterior loading. In addition, the corresponding 1D coupled static-dynamic loading experiment is designed to verify the analysis results of catastrophe model The test is done with Instron 1342 electroservo controlled testing system, in which medium strain rate is caused by monotony rising dynamic load. The parameters are obtained combining theoretical model with experiment. The experimental and theoretical curves of critical dynamic load vs static load are rather coincided, thus the new model is proved to be correct.

  18. Success of immediate loading implants compared to conventionally-loaded implants: a literature review.

    Science.gov (United States)

    Al-Sawai, Abdul-Aziz; Labib, Hussein

    2016-08-01

    The purpose of this systematic literature review was to compare the clinical performance between conventionally- (delayed) and immediately-loaded implants. A literature search of studies published between 1995 and 2012 was performed using several electronic databases and the following key words: "immediate loading", "dental implants", "immediate function", "early loading", "oral implants", "immediate restoration", and "systematic review" was performed. The electronic search was supplemented with hand-searching in dental journals and cross-referencing within the selected articles. Studies were considered for inclusion if they analyzed the success of the immediate loading protocol for implants, with emphasis given to randomized, controlled clinical trials. Among the clinical studies extracted from the literature, 120 studies met the inclusion criteria and were included in this systematic review. These studies included trials that involved yielded consistent results of success rates of immediately-loaded implants comparable to those known from conventionally-loaded implants, which were subjected to the immediate loading protocol or other loading protocols. According to the findings, there is evidence to suggest that immediate loading protocols demonstrate high implant survival rates and could be cautiously recommended for certain clinical situations. However, studies with a high level of evidence, especially randomized, controlled trials, performed over a longer timeframe are required to show a clear benefit over conventional and other loading types.

  19. Home Appliance Load Scheduling with SEMIAH

    DEFF Research Database (Denmark)

    Jacobsen, Rune Hylsberg; Ghasem Azar, Armin; Zhang, Qi

    2015-01-01

    The European research project SEMIAH aims at designing a scalable infrastructure for residential demand response. This paper presents the progress towards a centralized load scheduling algorithm for controlling home appliances taking power grid constraints and satisfaction of consumers into account....

  20. S-Band Loads for SLAC Linac

    Energy Technology Data Exchange (ETDEWEB)

    Krasnykh, A.; Decker, F.-J.; /SLAC; LeClair, R.; /INTA Technologies, Santa Clara

    2012-08-28

    The S-Band loads on the current SLAC linac RF system were designed, in some cases, 40+ years ago to terminate 2-3 MW peak power into a thin layer of coated Kanthal material as the high power absorber [1]. The technology of the load design was based on a flame-sprayed Kanthal wire method onto a base material. During SLAC linac upgrades, the 24 MW peak klystrons were replaced by 5045 klystrons with 65+ MW peak output power. Additionally, SLED cavities were introduced and as a result, the peak power in the current RF setup has increased up to 240 MW peak. The problem of reliable RF peak power termination and RF load lifetime required a careful study and adequate solution. Results of our studies and three designs of S-Band RF load for the present SLAC RF linac system is discussed. These designs are based on the use of low conductivity materials.

  1. PLASTIC LIMIT LOAD ANALYSIS OF DEFECTIVE PIPELINES

    Institute of Scientific and Technical Information of China (English)

    ChenGang; LiuYinghua; XuBingye

    2003-01-01

    The integrity assessment of defective pipelines represents a practically important task of structural analysis and design in various technological areas, such as oil and gas industry, power plant engineering and chemical factories. An iterative algorithm is presented for the kinematic limit analysis of 3-D rigid-perfectly plastic bodies. A numerical path scheme for radial loading is adopted to deal with complex multi-loading systems. The numerical procedure has been applied to carry out the plastic collapse analysis of pipelines with part-through slot under internal pressure, bending moment and axial force. The effects of various shapes and sizes of part-through slots on the collapse loads of pipelines are systematically investigated and evaluated. Some typical failure modes corresponding to different configurations of slots and loading forms are studied.

  2. LEACH Algorithm Based on Load Balancing

    Directory of Open Access Journals (Sweden)

    Wangang Wang

    2013-09-01

    Full Text Available This paper discusses advantages of LEACH Algorithm and the existing improved model which takes the famous hierarchy clustering routing protocol LEACH Algorithm as researching object. Then the paper indicates the problem that in the algorithm capacity factor of cluster head node is not taken into account leading the structure of clusters to be not so reasonable. This research discusses an energy-uniform cluster and cluster head selecting mechanism in which “Pseudo cluster head” concept is introduced in order to coordinate with “Load Monitor” Mechanism and “Load Leisure” Mechanism to maintain load balancing of cluster head character and stability of network topology. On the basis of LEACH Protocol improving algorithm of LEACH-C, CEFL and DCHS. NS2 simulation instrument is applied to do simulation analysis on the improved algorithm. Simulation result shows that LEACH-P Protocol effectively increase energy utilization efficiency, lengthens network lifetime and balances network load.  

  3. A Survey on the Ship Loading Problem

    DEFF Research Database (Denmark)

    Iris, Cagatay; Pacino, Dario

    2015-01-01

    Recent statistics show that large container terminals can process more than 30 million containers a year, and are constantly in search for the better ways to optimize processing time, deliver high quality and profitable services. Some of the terminal decisions are, however, dependent on externali......Recent statistics show that large container terminals can process more than 30 million containers a year, and are constantly in search for the better ways to optimize processing time, deliver high quality and profitable services. Some of the terminal decisions are, however, dependent...... on externalities. One of those is the ship loading process. Based on the stowage plan received by liner shippers, terminal operators plan the execution of load and discharge operations. In this paper we present a literature review for the Ship Loading Problem, where stowage and loading sequencing and scheduling...

  4. Radiopure Metal-Loaded Liquid Scintillator

    Energy Technology Data Exchange (ETDEWEB)

    Rosero, Richard [Brookhaven National Lab. (BNL), Upton, NY (United States). Chemistry Dept.; Yeh, Minfang [Brookhaven National Lab. (BNL), Upton, NY (United States). Chemistry Dept.

    2015-03-18

    Metal-loaded liquid scintillator plays a key role in particle and nuclear physics experiments. The applications of metal ions in various neutrino experiments and the purification methods for different scintillator components are discussed in this paper.

  5. Loaded Gelled Bipropellants for Optimized Performance Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The focus of this program is the development and validation of formulations, and development methodologies, for optimizing high-performance particulate-loaded...

  6. Cognitive load theory and e-learning

    NARCIS (Netherlands)

    Van Mierlo, Christa; Jarodzka, Halszka; Kirschner, Femke; Kirschner, Paul A.

    2012-01-01

    Van Mierlo, C. M., Jarodzka, H., Kirschner, F., & Kirschner, P. A. (2012). Cognitive load theory in e-learning. In Z. Yan (Ed.), Encyclopedia of cyber behavior (pp. 1178-1211). Hershey, PA: IGI Global.

  7. Integrating Autonomous Load Controllers in Power Systems

    DEFF Research Database (Denmark)

    Douglass, Philip James

    violations of voltage constraints. This voltage-sensitive controller can also operate alone, without the frequency-sensitive controller, to provide voltage regulation service and increase load diversity in any distribution network where lower voltage level corresponds to higher load.The frequency......-sensitive and voltage-sensitive autonomous load are viable alternatives to conventional frequency and voltage control devices. When used in combination, they complement each other. In systems where the operator has centrally dispatchable resources to regulate frequency, these resources can be used to dispatch otherwise...... autonomous frequency-sensitive loads. Moreover, where centrally dispatchable frequency regulation resources can rapidly change operating points, such as in a micro-grid, the energy sources can be used as transmitters for a ultra-low-bandwidth uni-directional power line communication system....

  8. Multifrequency Printed Antennas Loaded with Metamaterial Particles

    Directory of Open Access Journals (Sweden)

    D. Segovia-Vargas

    2009-06-01

    Full Text Available This paper provides a review of printed antennas loaded with metamaterial particles. This novel technique allows developing printed antennas with interesting features such as multifrequency (simultaneous operation over two or more frequency bands and multifunctionality (e. g. radiation pattern diversity. Moreover, compactness is also achieved and the main advantages of conventional printed antennas (light weight, low profile, low cost ... are maintained. Different types of metamaterial-loaded printed antennas are reviewed: printed dipoles and patch antennas. Several prototypes are designed, manufactured and measured showing good results. Furthermore, simple but accurate equivalent models are proposed. These models allow an easy and quick design of metamaterial-loaded printed antennas. Finally, two interesting applications based on the proposed antennas are reviewed: the patch antennas are used as radiating elements of emerging active RFID systems in the microwave band and the metamaterial-loaded printed dipoles are employed to increase the performance of log-periodic arrays.

  9. Cooling Load Distribution of Large Space Building

    Institute of Scientific and Technical Information of China (English)

    CHEN Hong-bing(陈红兵); TU Guang-bei(涂光备); YANG Jie(杨洁); Chan K T

    2003-01-01

    The cooling and heating load distribution of large area air-conditioned room such as "open" offices, shopping malls and waiting rooms is usually assumed to be even in air conditioning system design. However, it is not the case in reality, and a low efficient air conditioning system results from this assumption. A simulation and analysis of the cooling load distribution of an office building in Hong Kong with TRANSYS software is provided in this paper. A typical office is divided into 13 zones for simulation, including external zone, medial zone and internal zone in the north, the south, the east and the west respectively and a central zone, instead of 4 directional zone. The result shows there is much cooling load difference between each zone, and more attention should be paid to uneven indoor cooling and heating load distribution to further guide the design.

  10. Designing divertor targets for uniform power load

    Science.gov (United States)

    Dekeyser, W.; Reiter, D.; Baelmans, M.

    2015-08-01

    Divertor design for next step fusion reactors heavily relies on 2D edge plasma modeling with codes as e.g. B2-EIRENE. While these codes are typically used in a design-by-analysis approach, in previous work we have shown that divertor design can alternatively be posed as a mathematical optimization problem, and solved very efficiently using adjoint methods adapted from computational aerodynamics. This approach has been applied successfully to divertor target shape design for more uniform power load. In this paper, the concept is further extended to include all contributions to the target power load, with particular focus on radiation. In a simplified test problem, we show the potential benefits of fully including the radiation load in the design cycle as compared to only assessing this load in a post-processing step.

  11. Final Project Report Load Modeling Transmission Research

    Energy Technology Data Exchange (ETDEWEB)

    Lesieutre, Bernard [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Bravo, Richard [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Yinger, Robert [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Chassin, Dave [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Huang, Henry [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Lu, Ning [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hiskens, Ian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Venkataramanan, Giri [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-03-31

    The research presented in this report primarily focuses on improving power system load models to better represent their impact on system behavior. The previous standard load model fails to capture the delayed voltage recovery events that are observed in the Southwest and elsewhere. These events are attributed to stalled air conditioner units after a fault. To gain a better understanding of their role in these events and to guide modeling efforts, typical air conditioner units were testing in laboratories. Using data obtained from these extensive tests, new load models were developed to match air conditioner behavior. An air conditioner model is incorporated in the new WECC composite load model. These models are used in dynamic studies of the West and can impact power transfer limits for California. Unit-level and systemlevel solutions are proposed as potential solutions to the delayed voltage recovery problem.

  12. Distracted and confused?: selective attention under load.

    Science.gov (United States)

    Lavie, Nilli

    2005-02-01

    The ability to remain focused on goal-relevant stimuli in the presence of potentially interfering distractors is crucial for any coherent cognitive function. However, simply instructing people to ignore goal-irrelevant stimuli is not sufficient for preventing their processing. Recent research reveals that distractor processing depends critically on the level and type of load involved in the processing of goal-relevant information. Whereas high perceptual load can eliminate distractor processing, high load on "frontal" cognitive control processes increases distractor processing. These findings provide a resolution to the long-standing early and late selection debate within a load theory of attention that accommodates behavioural and neuroimaging data within a framework that integrates attention research with executive function.

  13. Exercise Load Measurement Insole (ELMI) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Exercise Load Measurement Insole (ELMI) is a system that is designed to measure normal and shear foot forces during exercise. The ELMI system is lightweight,...

  14. LIGHT-WEIGHT LOAD-BEARING STRUCTURE

    DEFF Research Database (Denmark)

    2009-01-01

    The invention relates to a light-weight load-bearing structure (1) with optimized compression zone (2), where along one or more compression zones (2) in the structure (1) to be cast a core (3) of strong concrete is provided, which core (3) is surrounded by concrete of less strength (4) compared...... to the core (3) of strong concrete. The invention also relates to a method of casting of light-weight load-bearing structures (1) with optimized compression zone (2) where one or more channels, grooves, ducts, pipes and/or hoses (5) formed in the load-bearing structure (1) serves as moulds for moulding one...... or more cores (3) of strong concrete in the light-weight load-bearing structure (1)....

  15. Modeling and control of thermostatically controlled loads

    Energy Technology Data Exchange (ETDEWEB)

    Backhaus, Scott N [Los Alamos National Laboratory; Sinitsyn, Nikolai [Los Alamos National Laboratory; Kundu, S. [UNIV OF MICHIGAN; Hiskens, I. [UNIV OF MICHIGAN

    2011-01-04

    As the penetration of intermittent energy sources grows substantially, loads will be required to play an increasingly important role in compensating the fast time-scale fluctuations in generated power. Recent numerical modeling of thermostatically controlled loads (TCLs) has demonstrated that such load following is feasible, but analytical models that satisfactorily quantify the aggregate power consumption of a group of TCLs are desired to enable controller design. We develop such a model for the aggregate power response of a homogeneous population of TCLs to uniform variation of all TCL setpoints. A linearized model of the response is derived, and a linear quadratic regulator (LQR) has been designed. Using the TCL setpoint as the control input, the LQR enables aggregate power to track reference signals that exhibit step, ramp and sinusoidal variations. Although much of the work assumes a homogeneous population of TCLs with deterministic dynamics, we also propose a method for probing the dynamics of systems where load characteristics are not well known.

  16. Development of Engine Loads Methodology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR seeks to improve the definition of design loads for rocket engine components such that higher performing, lighter weight engines can be developed more...

  17. The research and preparation of a bi-layer biodegradable external sheath with directional drug release profiles for vein graft

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Zhenjie, E-mail: lawson3001@gmail.com [Department of Surgery, Sir Run Run Shaw Hospital, Zhejiang University, Hangzhou (China); Institute of Vascular Surgery, Fudan University, Shanghai (China); Department of Surgery, University of Wisconsin-Madison, WI (United States); Guo, Zhenying [Department of Pathology, Zhejiang Cancer Hospital, Hangzhou (China); Si, Yi [Department of Surgery, University of Wisconsin-Madison, WI (United States); Zhang, Xiangman; Shi, Zhenyu [Institute of Vascular Surgery, Fudan University, Shanghai (China); Chen, Feng [College of Chemical Engineering and Material Science, Zhejiang University of Technology, Hangzhou (China); Fu, Weiguo [Institute of Vascular Surgery, Fudan University, Shanghai (China)

    2013-11-01

    External sheath has been suggested for autologous vein grafts to inhibit neointimal hyperplasia and prevent anastomosis stricture. In this study, we prepared a bi-layer biodegradable paclitaxel-loaded sheaths with a synthetic copolymer poly(ethylene carbonate-ε-caprolactone) at room temperature. The bi-layer drug release profiles of the Paclitaxel-loaded (PTX-loaded) sheath significantly slow down the paclitaxel (PTX) release rates and result in a directional drug release way. Moreover, the nanofibrous layer of PTX-loaded poly(EC-CL) sheaths reduced the cytotoxicity and provided a better support for fibroblast adhesion and proliferation than the PTX-loaded layer of the sheaths. Thus, this study demonstrates that the bi-layer PTX-loaded poly(EC-CL) sheath with directional drug release profiles have a promising application for vein graft to against neointimal hyperplasia and anastomotic stricture.

  18. On Load Shedding in Complex Event Processing

    OpenAIRE

    2013-01-01

    Complex Event Processing (CEP) is a stream processing model that focuses on detecting event patterns in continuous event streams. While the CEP model has gained popularity in the research communities and commercial technologies, the problem of gracefully degrading performance under heavy load in the presence of resource constraints, or load shedding, has been largely overlooked. CEP is similar to "classical" stream data management, but addresses a substantially different class of queries. Thi...

  19. MCO loading and cask loadout technical manual

    Energy Technology Data Exchange (ETDEWEB)

    PRAGA, A.N.

    1998-10-01

    A compilation of the technical basis for loading a multi-canister overpack (MCO) with spent nuclear fuel and then placing the MCO into a cask for shipment to the Cold Vacuum Drying Facility. The technical basis includes a description of the process, process technology that forms the basis for loading alternatives, process control considerations, safety considerations, equipment description, and a brief facility structure description.

  20. Mechanical Predictors of Discomfort during Load Carriage.

    Directory of Open Access Journals (Sweden)

    Patrick D Wettenschwiler

    Full Text Available Discomfort during load carriage is a major issue for activities using backpacks (e.g. infantry maneuvers, children carrying school supplies, or outdoor sports. It is currently unclear which mechanical parameters are responsible for subjectively perceived discomfort. The aim of this study was to identify objectively measured mechanical predictors of discomfort during load carriage. We compared twelve different configurations of a typical load carriage system, a commercially available backpack with a hip belt. The pressure distribution under the hip belt and the shoulder strap, as well as the tensile force in the strap and the relative motion of the backpack were measured. Multiple linear regression analyses were conducted to investigate possible predictors of discomfort. The results demonstrate that static peak pressure, or alternatively, static strap force is a significant (p<0.001 predictor of discomfort during load carriage in the shoulder and hip region, accounting for 85% or more of the variation in discomfort. As an additional finding, we discovered that the regression coefficients of these predictors are significantly smaller for the hip than for the shoulder region. As static peak pressure is measured directly on the body, it is less dependent on the type of load carriage system than static strap force. Therefore, static peak pressure is well suited as a generally applicable, objective mechanical parameter for the optimization of load carriage system design. Alternatively, when limited to load carriage systems of the type backpack with hip belt, static strap force is the most valuable predictor of discomfort. The regionally differing regression coefficients of both predictors imply that the hip region is significantly more tolerant than the shoulder region. In order to minimize discomfort, users should be encouraged to shift load from the shoulders to the hip region wherever possible, at the same time likely decreasing the risk of low

  1. Stochastic Load Models and Footbridge Response

    DEFF Research Database (Denmark)

    Pedersen, Lars; Frier, Christian

    2015-01-01

    Pedestrians may cause vibrations in footbridges and these vibrations may potentially be annoying. This calls for predictions of footbridge vibration levels and the paper considers a stochastic approach to modeling the action of pedestrians assuming walking parameters such as step frequency...... the footbridge and when describing the action of the pedestrians (such as for instance the number of load harmonics). Focus is on estimating vertical structural response to single person loading....

  2. Gearbox Reliability Collaborative (GRC) Description and Loading

    Energy Technology Data Exchange (ETDEWEB)

    Oyague, F.

    2011-11-01

    This document describes simulated turbine load cases in accordance to the IEC 61400-1 Ed.3 standard, which is representative of the typical wind turbine design process. The information presented herein is intended to provide a broad understanding of the gearbox reliability collaborative 750kW drivetrain and turbine configuration. In addition, fatigue and ultimate strength drivetrain loads resulting from simulations are presented. This information provides the bases for the analytical work of the gearbox reliability collaborative effort.

  3. Pressure Hull Analysis under Shock Loading

    OpenAIRE

    Ya-Jung Lee; Chia-Hao Hsu; Chien-Hua Huang

    2008-01-01

    The hull of high performance submarines must resist underwater shock loading due to exploding torpedoes or depth bombs. An underwater shock involving an initial shock wave and successive bubble pulsating waves is so complex that a theoretical technique for deriving shock pressure distribution is required for improving simulation efficiency. Complete shock loading is obtained theoretically in this work, and responses of a submarine pressure hull are calculated using ABAQUS USA (Underwater Shoc...

  4. Dynamic Multi-class Network Loading Problem

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The dynamic network loading problem (DNLP) consists in determining on a congested network, timedependent arc volumes, together with arc and path travel times, given the time varying path flow departure rates over a finite time horizon. The objective of this paper is to present the formulation of an analytical dynamic multiclass network loading model. The model does not require the assumption of the FIFO condition. The existence of a solution to the model is shown.

  5. Load Transfer Mechanisms in Anchored Geosynthetic Systems

    Science.gov (United States)

    1990-12-20

    TITLE (Include Security Classitcation) (U) Load Transfer Mechanisms in Anchored Geosynthetic Systems 12. PERSONAL AUTHOR(S) Hrvciw, Roman D. 13a... Geosynthetics 19. ABSTRACT (Continue on reverse it necessary and identity by block number) The success of an anchored geosynthetic system (AGS) depends on...the satisfactory transfer of load between the surface-deployed geosynthetic and anchors (typically ribbed reinforcing rods) driven into the slope

  6. Ice load on offshore wind turbine foundations; Ice load on offshore wind turbine foundations

    Energy Technology Data Exchange (ETDEWEB)

    Voelund, P.; Joergensen, L.B. [Energi E2, Koebenhavn (Denmark); Gravesen, H.; Soerensen, S.L. [Carl Bro, Glostrup (Denmark); Pedersen, B.; Lorenz, R.S.; Miller, R.; Oestergaard, S.; Riber, H.J. [LIC Engineering, Hellerup (Denmark); Pedersen, J.; Gjerding, J.B. [Tripod, Soeborg (DK)

    2003-12-01

    Ice loading on wind turbine foundations in the inner Danish seas and straits is a design load. Relative conservative design requirement/guidelines have so far been used for prediction of ice loads. The aim of the present project is to improve knowledge of ice loads on wind turbine foundations and to identify improved prediction methods and possible ways of optimising the foundation design With respect to ice loads. Conference presentations and papers of ice theory have been collected and studied. International state of the art ice models and theories are described in the project documents and tested. Models have been made to investigate and compare predicted results with scaled model tests. Scaled model tests of conical and cylindrical foundations have been made at NRC at Canada. The test stand and tests are presented along with analysis of the data. To reduce ice loading on structures in the inner Danish seas and straits conical foundations are used. The conical foundation will reduce the ice loads, but slightly increase the wave load - the consequences have been investigated. Main activities of the project cover: (1) Review of publicly available literature on ice ridges. (2) Ice growth modelling in the open sea as well as in sheltered sea. (3) Modelling of ice floe interaction with an offshore wind turbine farm. (4) Modelling of structural response of a wind turbine to ice loads. (5) Implementation and test of two semi-empincal dynamic ice load models. (6) Modelling of ice load generated fatigue damage. (7) Review of the ice load design requirements in the inner Danish seas and straits. (8) Test bed measurements at NRC, Canada, of ice loads on sale-models of cylindrical, 55 deg. C and 65 deg. C conical and double conical foundations. (9) Analysis of these scaled model tests. (10) Generation of 10 min time series from short term scaled model tests. (11) Detailed design requirements for upwards and downwards bending cones. (12) Design requirements for a double

  7. Load-Dependent Friction Hysteresis on Graphene.

    Science.gov (United States)

    Ye, Zhijiang; Egberts, Philip; Han, Gang Hee; Johnson, A T Charlie; Carpick, Robert W; Martini, Ashlie

    2016-05-24

    Nanoscale friction often exhibits hysteresis when load is increased (loading) and then decreased (unloading) and is manifested as larger friction measured during unloading compared to loading for a given load. In this work, the origins of load-dependent friction hysteresis were explored through atomic force microscopy (AFM) experiments of a silicon tip sliding on chemical vapor deposited graphene in air, and molecular dynamics simulations of a model AFM tip on graphene, mimicking both vacuum and humid air environmental conditions. It was found that only simulations with water at the tip-graphene contact reproduced the experimentally observed hysteresis. The mechanisms underlying this friction hysteresis were then investigated in the simulations by varying the graphene-water interaction strength. The size of the water-graphene interface exhibited hysteresis trends consistent with the friction, while measures of other previously proposed mechanisms, such as out-of-plane deformation of the graphene film and irreversible reorganization of the water molecules at the shearing interface, were less correlated to the friction hysteresis. The relationship between the size of the sliding interface and friction observed in the simulations was explained in terms of the varying contact angles in front of and behind the sliding tip, which were larger during loading than unloading.

  8. Storage Stabilisation of Albumin-Loaded Chitosan Nanoparticles by ...

    African Journals Online (AJOL)

    bovine serum albumin-loaded chitosan/dextran sulphate (BSA-loaded CS/DS) nanoparticles. Methods: BSA-loaded ... biodegradability and antibacterial properties [6]. Recently .... then blotted with filter paper to remove excess adsorbed water ...

  9. Reduced design load basis for ultimate blade loads estimation in multidisciplinary design optimization frameworks

    DEFF Research Database (Denmark)

    Pavese, Christian; Tibaldi, Carlo; Larsen, Torben J.;

    2016-01-01

    The aim is to provide a fast and reliable approach to estimate ultimate blade loads for a multidisciplinary design optimization (MDO) framework. For blade design purposes, the standards require a large amount of computationally expensive simulations, which cannot be efficiently run each cost...... function evaluation of an MDO process. This work describes a method that allows integrating the calculation of the blade load envelopes inside an MDO loop. Ultimate blade load envelopes are calculated for a baseline design and a design obtained after an iteration of an MDO. These envelopes are computed...... for a full standard design load basis (DLB) and a deterministic reduced DLB. Ultimate loads extracted from the two DLBs with the two blade designs each are compared and analyzed. Although the reduced DLB supplies ultimate loads of different magnitude, the shape of the estimated envelopes are similar...

  10. 2006 Pacific Northwest Loads and Resources Study.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    2006-03-01

    The Pacific Northwest Loads and Resources Study (White Book), which is published annually by the Bonneville Power Administration (BPA), establishes one of the planning bases for supplying electricity to customers. The White Book contains projections of regional and Federal system load and resource capabilities, along with relevant definitions and explanations. The White Book also contains information obtained from formalized resource planning reports and data submittals including those from individual utilities, the Northwest Power and Conservation Council (Council), and the Pacific Northwest Utilities Conference Committee (PNUCC). The White Book is not an operational planning guide, nor is it used for determining BPA revenues, although the database that generates the data for the White Book analysis contributes to the development of BPA's inventory and ratemaking processes. Operation of the Federal Columbia River Power System (FCRPS) is based on a set of criteria different from that used for resource planning decisions. Operational planning is dependent upon real-time or near-term knowledge of system conditions that include expectations of river flows and runoff, market opportunities, availability of reservoir storage, energy exchanges, and other factors affecting the dynamics of operating a power system. The load resource balance of both the Federal system and the region is determined by comparing resource availability to an expected level of total retail electricity consumption. Resources include projected energy capability plus contract purchases. Loads include a forecast of retail obligations plus contract obligations. Surplus energy is available when resources are greater than loads. This surplus energy could be marketed to increase revenues. Energy deficits occur when resources are less than loads. These energy deficits will be met by any combination of the following: better-than-critical water conditions, demand-side management and conservation

  11. Optimum blade loading for a powered rotor in descent

    Institute of Scientific and Technical Information of China (English)

    Ramin Modarres; David A. Peters

    2016-01-01

    The optimum loading for rotors has previously been found for hover, climb and wind turbine conditions;but, up to now, no one has determined the optimum rotor loading in descent. This could be an important design consideration for rotary-wing parachutes and low-speed des-cents. In this paper, the optimal loading for a powered rotor in descent is found from momentum theory based on a variational principle. This loading is compared with the optimal loading for a rotor in hover or climb and with the Betz rotor loading (which is optimum for a lightly-loaded rotor). Wake contraction for each of the various loadings is also presented.

  12. Preparation of paclitaxel/chitosan co-assembled core-shell nanofibers for drug-eluting stent

    Science.gov (United States)

    Tang, Jing; Liu, Yongjia; Zhu, Bangshang; Su, Yue; Zhu, Xinyuan

    2017-01-01

    The paclitaxel/chitosan (PTX/CS) core-shell nanofibers (NFs) are easily prepared by co-assembly of PTX and CS and used in drug-eluting stent. The mixture solution of PTX (dissolved in ethanol) and CS (dissolved in 1% acetic acid water solution) under sonication will make the formation of NFs, in which small molecule PTX co-assembles with biomacromolecular CS through non-covalent interactions. The obtained NFs are tens to hundreds nanometers in diameter and millimeter level in length. Furthermore, the structure of PTX/CS NFs was characterized by confocal laser scanning microscopy (CLSM), zeta potential, X-ray photoelectron spectroscopy (XPS) and nanoscale infra-red (nanoIR), which provided evidences demonstrated that PTX/CS NFs are core-shell structures. The 'shell' of CS wrapped outside of the NFs, while PTX is located in the core. Thus it resulted in high drug loading content (>40 wt.%). The well-controlled drug release, low cytotoxicity and good haemocompatibility were also found in drug carrier system of PTX/CS NFs. In addition, the hydrophilic and flexible properties of NFs make them easily coating and filming on stent to prepare drug-eluting stent (DES). Therefore, this study provides a convenient method to prepare high PTX loaded NFs, which is a promising nano-drug carrier used for DES and other biomedical applications. The possible molecular mechanism of PTX and CS co-assembly and core-shell nanofiber formation is also explored.

  13. Postural and Load Distribution Asymmetries in Preschoolers

    Directory of Open Access Journals (Sweden)

    Paulysnara de Oliveira Almeida

    2016-03-01

    Full Text Available The aim of the study was to investigate the postural and load distribution symmetries in preschool children. The sample consisted of 67 preschool children with a median age of 54.00 ± 5.06 months. Postural parameters such as the horizontal alignment of the head, the acromion and Antero Superior Iliac Spines (ASIS, the angles between the acromial and ASIS, frontal, Q, knee and ankle and horizontal asymmetry of the scapula in relation to T3 were evaluated by photogrammetry. The baropodometry was used to identify the distribution of plantar pressure, while the medial arch of the foot was analyzed by photographic image. The median, standard deviation and the symmetry ratio were calculated for each parameter considered symmetry values greater than 90%. The Pearson’s or Spearman’s correlation were used between the parameters analyzed. There was asymmetric for postural and load distribution parameters for both genders and a null correlation between the symmetry of the surface and foot morphology and negative weak correlation significant between of the load foot and the front angle of the lower limb symmetries. The presence of asymmetries, postural and/or of load distribution, observed in early childhood suggest the importance of monitoring the postural and foot load parameters in the long term, preventing future postural and biomechanical alterations.

  14. Power transformer additional load losses separation procedure

    Directory of Open Access Journals (Sweden)

    Kostić Miloje M.

    2011-01-01

    Full Text Available The proposed procedure is based on the fact that total transformer losses (PLL1,n, determined by short circuit test, can be separated into two components: the eddy current losses in the windings (PEC1,n and stray flux losses (PSL1,n in iron parts of construction as well as in the transformer tank walls. The total additional load losses, PLLd1 and PLLdh, are determined by short circuit test results, conducted at rated frequency (f1 and at increased harmonic frequency (fh=h*f1. Using so obtained total additional load losses, PLLd1 and PLLdh, which can be expressed in the form PLLdh=PEC1,n*h2 + PSL1,n*h, the corresponding rate additional load losses values PEC1,n and PSL1,n are derived. At the end, for given load with predefined high harmonics content, (Ih/I1n, relative to rated current, the total additional load losses value ΣPLLdh > PLLd1, is found. In such a way all harmonics up to hmax are taken into account.

  15. Nonlinear dynamical characteristics of bed load motion

    Institute of Scientific and Technical Information of China (English)

    BAI; Yuchuan; XU; Haijue; XU; Dong

    2006-01-01

    Bed forms of various kinds that evolve naturally on the bottom of sandy coasts and rivers are a result of the kinematics of bed load transport. Based on the group motion of particles in the bed load within the bottom layer, a study on the nonlinear dynamics of bed load transport is presented in this paper. It is found that some development stages, such as the initiation, the equilibrium sediment transport, and the transition from a smooth bed to sand dunes, can be accounted for by different states in the nonlinear system of the bed load transport. It is verified by comparison with experimental data reported by Laboratoire Nationae D'Hydraulique, Chatou, France, that the evolution from a smooth bed to sand dunes is determined by mutation in the bed load transport. This paper presents results that may offer theoretical explanations to the experimental observations. It is also an attempt to apply the state-of-the-art nonlinear science to the classical sediment transport mechanics.

  16. Lateral load pattern in pushover analysis

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The seismic capacity curves of three types of buildings including frame, frame-shear wall and shear wall obtained by pushover analysis under different lateral load patterns are compared with those from nonlinear time history analysis. Based on the numerical results obtained a two-phase load pattern: an inverted triangle(first mode)load pattern until the base shear force reaches β times its maximum value,Vmax, followed by a(x/H)α form, here β and α being some coefficients depending on the type of the structures considered, is proposed in the paper, which can provide excellent approximation of the seismic capacity curve for low-to-mid-rise shear type buildings. Furthermore, it is shown both the two-phase load pattern proposed and the invariant uniform pattern can be used for low-to-mid-rise shear-bending type and low-rise bending type of buildings. No suitable load patterns have been found for high-rise buildings.

  17. Fruit load governs transpiration of olive trees.

    Science.gov (United States)

    Bustan, Amnon; Dag, Arnon; Yermiyahu, Uri; Erel, Ran; Presnov, Eugene; Agam, Nurit; Kool, Dilia; Iwema, Joost; Zipori, Isaac; Ben-Gal, Alon

    2016-03-01

    We tested the hypothesis that whole-tree water consumption of olives (Olea europaea L.) is fruit load-dependent and investigated the driving physiological mechanisms. Fruit load was manipulated in mature olives grown in weighing-drainage lysimeters. Fruit was thinned or entirely removed from trees at three separate stages of growth: early, mid and late in the season. Tree-scale transpiration, calculated from lysimeter water balance, was found to be a function of fruit load, canopy size and weather conditions. Fruit removal caused an immediate decline in water consumption, measured as whole-plant transpiration normalized to tree size, which persisted until the end of the season. The later the execution of fruit removal, the greater was the response. The amount of water transpired by a fruit-loaded tree was found to be roughly 30% greater than that of an equivalent low- or nonyielding tree. The tree-scale response to fruit was reflected in stem water potential but was not mirrored in leaf-scale physiological measurements of stomatal conductance or photosynthesis. Trees with low or no fruit load had higher vegetative growth rates. However, no significant difference was observed in the overall aboveground dry biomass among groups, when fruit was included. This case, where carbon sources and sinks were both not limiting, suggests that the role of fruit on water consumption involves signaling and alterations in hydraulic properties of vascular tissues and tree organs.

  18. Distribution of Cognitive Load in Web Search

    CERN Document Server

    Gwizdka, Jacek

    2010-01-01

    The search task and the system both affect the demand on cognitive resources during information search. In some situations, the demands may become too high for a person. This article has a three-fold goal. First, it presents and critiques methods to measure cognitive load. Second, it explores the distribution of load across search task stages. Finally, it seeks to improve our understanding of factors affecting cognitive load levels in information search. To this end, a controlled Web search experiment with forty-eight participants was conducted. Interaction logs were used to segment search tasks semi-automatically into task stages. Cognitive load was assessed using a new variant of the dual-task method. Average cognitive load was found to vary by search task stages. It was significantly higher during query formulation and user description of a relevant document as compared to examining search results and viewing individual documents. Semantic information shown next to the search results lists in one of the st...

  19. Low-Load Space Conditioning Needs Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Puttagunta, Srikanth [Consortium for Advanced Residential Buildings, Norwalk, CT (United States)

    2015-05-01

    With limited low-load options in the HVAC market, many new-construction housing units are being fitted with oversized equipment - thus facing penalties in system efficiency, comfort, and cost. To bridge the gap between currently available HVAC equipment and the rising demand for low-load HVAC equipment in the marketplace, HVAC equipment manufacturers need to be fully aware of multifamily buildings and single-family homes market needs. Over the past decade, Steven Winter Associates, Inc. (SWA) has provided certification and consulting services on hundreds of housing projects and has accrued a large pool of data. CARB compiled and analyzed these data to see what the thermal load ranges are in various multifamily apartments and attached single-family home types (duplex and townhouse). In total, design loads from 941 dwellings from SWA's recent multifamily and attached single-family work across the Northeast and Mid-Atlantic were analyzed. Information on the dwelling characteristics, design loads, and the specifications of installed mechanical equipment were analyzed to determine any trends that exist within the dataset.

  20. Modular load flow for restructured power systems

    CERN Document Server

    Hariharan, M V; Gupta, Pragati P

    2016-01-01

    In the subject of power systems, authors felt that a re-look is necessary at some conventional methods of analysis. In this book, the authors have subjected the time-honoured load flow to a close scrutiny. Authors have discovered and discussed a new load flow procedure – Modular Load Flow. Modular Load Flow explores use of power – a scalar – as source for electrical circuits which are conventionally analysed by means of phasors – the ac voltages or currents. The method embeds Kirchhoff’s circuit laws as topological property into its scalar equations and results in a unique wonderland where phase angles do not exist! Generators are shown to have their own worlds which can be superimposed to obtain the state of the composite power system. The treatment is useful in restructured power systems where stakeholders and the system operators may desire to know individual generator contributions in line flows and line losses for commercial reasons. Solution in Modular Load Flow consists of explicit expression...

  1. Load forecasting method considering temperature effect for distribution network

    Directory of Open Access Journals (Sweden)

    Meng Xiao Fang

    2016-01-01

    Full Text Available To improve the accuracy of load forecasting, the temperature factor was introduced into the load forecasting in this paper. This paper analyzed the characteristics of power load variation, and researched the rule of the load with the temperature change. Based on the linear regression analysis, the mathematical model of load forecasting was presented with considering the temperature effect, and the steps of load forecasting were given. Used MATLAB, the temperature regression coefficient was calculated. Using the load forecasting model, the full-day load forecasting and time-sharing load forecasting were carried out. By comparing and analyzing the forecast error, the results showed that the error of time-sharing load forecasting method was small in this paper. The forecasting method is an effective method to improve the accuracy of load forecasting.

  2. Optimal Control Allocation with Load Sensor Feedback for Active Load Suppression

    Science.gov (United States)

    Miller, Christopher

    2017-01-01

    These slide sets describe the OCLA formulation and associated algorithms as a set of new technologies in the first practical application of load limiting flight control utilizing load feedback as a primary control measurement. Slide set one describes Experiment Development and slide set two describes Flight-Test Performance.

  3. 14 CFR 25.511 - Ground load: unsymmetrical loads on multiple-wheel units.

    Science.gov (United States)

    2010-01-01

    ... differential equal to 2/3 of the most unfavorable combination of diameter variations that is obtained when... tires— (1) The applied side or drag load factor, or both factors, at the center of gravity must be the most critical value up to 50 percent and 40 percent, respectively, of the limit side or drag load...

  4. A novel control strategy for load converter of DC isolated distribution system under unbalanced loading conditions

    Institute of Scientific and Technical Information of China (English)

    R. NOROOZIAN; M. ABEDI; G.B. GHAREHPETIAN; S. H. HOSSEINI

    2009-01-01

    A novel control strategy for the load converter supplying the unbalanced AC load in a DC isolated distribution system is presented. The control algorithm results in balanced and sinusoidal load voltages under unbalanced AC loading. The unbalanced load is characterized in the d-q-0 rotating coordinate based on symmetrical sequence components. Also, the mathematical model of the load converter in both a-b-c and d-q-0 coordinates is derived by using the average large signal model. Then, two control strategies for the load converter are presented. The first one uses the conventional d-q-0 controller to ensure the voltage and current regulation. The second one is a newly proposed control strategy based on the decomposition of the voltage and current into instantaneous positive, negative, and zero sequences. These three sequences are controlled independently in their own reference frames as DC signals. The performance of the load converter using these two control strategies is compared. Simulation results show the validity and capability of the newly proposed control strategy.

  5. System ID Modern Control Algorithms for Active Aerodynamic Load Control and Impact on Gearbox Loading

    NARCIS (Netherlands)

    Berg, D.; Wilson, D.; Resor, B.; Berg, J.; Barlas, J.; Crowther, A.; Halse, C.

    2010-01-01

    Prior work on active aerodynamic load control (AALC) of wind turbine blades has demonstrated that appropriate use of this technology has the potential to yield significant reductions in blade loads, leading to a decrease in wind cost of energy. While the general concept of AALC is usually discussed

  6. A Microstructural Study of Load Distribution in Cartilage: A Comparison of Stress Relaxation versus Creep Loading

    Directory of Open Access Journals (Sweden)

    Ashvin Thambyah

    2015-01-01

    Full Text Available The compressive response of articular cartilage has been extensively investigated and most studies have focussed largely on the directly loaded matrix. However, especially in relation to the tissue microstructure, less is known about load distribution mechanisms operating outside the directly loaded region. We have addressed this issue by using channel indentation and DIC microscopy techniques that provide visualisation of the matrix microstructural response across the regions of both direct and nondirect loading. We hypothesise that, by comparing the microstructural response following stress relaxation and creep compression, new insights can be revealed concerning the complex mechanisms of load bearing. Our results indicate that, with stress relaxation, the initial mode of stress decay appears to primarily involve relaxation of the surface layer. In the creep loading protocol, the main mode of stress release is a lateral distribution of load via the mid matrix. While these two modes of stress redistribution have a complex relationship with the zonally differentiated tissue microstructure and the depth of strain, four mechanostructural mechanisms are proposed to describe succinctly the load responses observed.

  7. Cognitive load measurement as a means to advance cognitive load theory

    NARCIS (Netherlands)

    Paas, F.; Tuovinen, J.E.; Tabbers, H.; van Gerven, P.W.M.

    2003-01-01

    This paper discusses cognitive load measurement techniques with regard to their contribution to cognitive load theory (CLT). CLT is concerned with the design of instructional methods that efficiently use people's limited cognitive processing capacity to apply acquired knowledge and skills to new

  8. Cognitive Load Theory: Advances in Research on Worked Examples, Animations, and Cognitive Load Measurement

    NARCIS (Netherlands)

    T.A.J.M. van Gog (Tamara); G.W.C. Paas (Fred); J. Sweller (John)

    2010-01-01

    textabstractThe contributions to this special issue document some recent advances of cognitive load theory, and are based on contributions to the Third International Cognitive Load Theory Conference (2009), Heerlen, The Netherlands. The contributions focus on developments in example-based learning,

  9. Damage Accumulation in Vertical Breakwaters due to Combined Impact Loading and Pulsating Wave Loads

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Nielsen, Søren R. K.

    1999-01-01

    elasto-plastic oscillator. The pulsating part of the wave loading is modelled as a filtered white noise process, and the impact load is modelled by a filtered Poisson process. It is shown how a distribution function for the accumulated permanent deformations can be obtained. Finally, an illustrative...

  10. System ID Modern Control Algorithms for Active Aerodynamic Load Control and Impact on Gearbox Loading

    NARCIS (Netherlands)

    Berg, D.; Wilson, D.; Resor, B.; Berg, J.; Barlas, J.; Crowther, A.; Halse, C.

    2010-01-01

    Prior work on active aerodynamic load control (AALC) of wind turbine blades has demonstrated that appropriate use of this technology has the potential to yield significant reductions in blade loads, leading to a decrease in wind cost of energy. While the general concept of AALC is usually discussed

  11. Cognitive Load Theory: Advances in Research on Worked Examples, Animations, and Cognitive Load Measurement

    NARCIS (Netherlands)

    T.A.J.M. van Gog (Tamara); G.W.C. Paas (Fred); J. Sweller (John)

    2010-01-01

    textabstractThe contributions to this special issue document some recent advances of cognitive load theory, and are based on contributions to the Third International Cognitive Load Theory Conference (2009), Heerlen, The Netherlands. The contributions focus on developments in example-based learning,

  12. Load alleviation potential of active flaps and individual pitch control in a full design load basis

    DEFF Research Database (Denmark)

    Barlas, Athanasios; Bergami, Leonardo; Hansen, Morten Hartvig;

    2015-01-01

    The load alleviation potential of the Controllable Rubber Trailing Edge Flap (CRTEF) is verified on a full Design Load Basis (DLB) setup using the aeroelastic code HAWC2, and by investigating a flap configuration for the NREL 5MW Reference Wind Turbine (RWT) model. The performance of the CRTEF co...

  13. Processing Capacity under Perceptual and Cognitive Load: A Closer Look at Load Theory

    Science.gov (United States)

    Fitousi, Daniel; Wenger, Michael J.

    2011-01-01

    Variations in perceptual and cognitive demands (load) play a major role in determining the efficiency of selective attention. According to load theory (Lavie, Hirst, Fockert, & Viding, 2004) these factors (a) improve or hamper selectivity by altering the way resources (e.g., processing capacity) are allocated, and (b) tap resources rather than…

  14. Design Load Basis for Offshore Wind turbines

    DEFF Research Database (Denmark)

    Natarajan, Anand; Hansen, Morten Hartvig; Wang, Shaofeng

    2016-01-01

    DTU Wind Energy is not designing and manufacturing wind turbines and does therefore not need a Design Load Basis (DLB) that is accepted by a certification body. However, to assess the load consequences of innovative features and devices added to existing offshore turbine concepts or new offshore...... turbine concept developed in our research, it is useful to have a full DLB that follows the current design standard and is representative of a general DLB used by the industry. It will set a standard for the offshore wind turbine design load evaluations performed at DTU Wind Energy, which is aligned...... with the challenges faced by the industry and therefore ensures that our research continues to have a strong foundation in this interaction. Furthermore, the use of a full DLB that follows the current standard can improve and increase the feedback from the research at DTU Wind Energy to the international...

  15. Cooling load across glazed building surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Aydinli, S.; Krochmann, J. (Technische Univ. Berlin (Germany, F.R.). Inst. fuer Lichttechnik)

    1980-05-01

    It is only possible to build favourably with regard to costs and energy requirements, if the windows which are required for the direct visual contact between the inner and outer space are favourably selected with regard to the thermal loading of the internal space during the summer months and the heat losses during the cold season of the year. To achieve this an exact calculation of the partial cooling load is required, which is caused by the solar radiation entering into the inner space through the glazed building surfaces. Described are the items for the calculation of the magnitude of the radiation which defines this part of the cooling load on to any inclined surface and the influence of the properties of the glazing.

  16. An Improved Hadoop Data Load Balancing Algorithm

    Directory of Open Access Journals (Sweden)

    Kun Liu

    2013-12-01

    Full Text Available Data load balancing is one of the key problems of big data technology. As a big data application, Hadoop has had many successful applications. HDFS is Hadoop Distributed File System and has the load balancing procedure which can balance the storage load on each machine. However, this method cannot balance the overload rack preferentially, and so it is likely to cause the breakdown of overload machines. In this paper, we focus on the overload machines and propose an improved algorithm for balancing the overload racks preferentially. The improved method constructs Prior Balance List list which includes overload machines, For Balance List list and NextForBalanceList list by many factors and balances among the racks selected from these lists firstly. Experiments show that the improved method can balance the overload racks in time and reduce the possibility of breakdown of these racks

  17. Behaviour of Soil Subjected to Dynamic Loads

    DEFF Research Database (Denmark)

    Bødker, L.

    1998-01-01

    Many geotechnical problems involve design of dynamically loaded foundations. The design criterion fr dynamically loaded foundations is often described in terms of limiting values for the displacements. The displacements in the soil are normally very small when dealing with dynamically loaded...... foundations, and hence it is necessary to know the deformation properties for the soil at very low strain level. The main topic of the project is to increase the knowledge of the behaviour of Danish soils at small strain levels and to extend the laboratory facilities to deal with testing at small strains....... The soil behaviour at very small strain levels is non-linear, and the most common testing technique for this situation is the resonant column technique. One of the aims of this project is to install, check, get familiar with and perform tests on different kinds of Danish soils in a new Drnevich...

  18. Phloem loading through plasmodesmata: a biophysical analysis

    CERN Document Server

    Comtet, Jean; Stroock, Abraham D

    2016-01-01

    In many species, sucrose en route out of the leaf migrates from photosynthetically active mesophyll cells into the phloem down its concentration gradient via plasmodesmata, i.e., symplastically. In some of these plants the process is entirely passive, but in others phloem sucrose is actively converted into larger sugars, raffinose and stachyose, and segregated (trapped), thus raising total phloem sugar concentration to a level higher than in the mesophyll. Questions remain regarding the mechanisms and selective advantages conferred by both of these symplastic loading processes. Here we present an integrated model - including local and global transport and the kinetics of oligomerization - for passive and active symplastic loading. We also propose a physical model of transport through the plasmodesmata. With these models, we predict that: 1) relative to passive loading, oligomerization of sucrose in the phloem, even in the absence of segregation, lowers the sugar content in the leaf required to achieve a given...

  19. MEASUREMENT OF WASTE LOADING IN SALTSTONE

    Energy Technology Data Exchange (ETDEWEB)

    Harbour, J; Vickie Williams, V

    2008-07-18

    One of the goals of the Saltstone variability study is to identify the operational and compositional variables that control or influence the important processing and performance properties of Saltstone grout mixtures. One of those properties of importance is the Waste Loading (WL) of the decontaminated salt solution (DSS) in the Saltstone waste form. Waste loading is a measure of the amount of waste that can be incorporated within a waste form. The value of the Saltstone waste loading ultimately determines the number of vaults that will be required to disposition all of the DSS. In this report, the waste loading is defined as the volume in milliliters of DSS per liter of Saltstone waste form. The two most important parameters that determine waste loading for Saltstone are water to cementitious material (w/cm) ratio and the cured grout density. Data are provided that show the dependence of waste loading on the w/cm ratio for a fixed DSS composition using the current premix material (45% Blast Furnace Slag (BFS), 45% Fly Ash (FA) and 10% Ordinary Portland Cement (OPC)). The impact of cured grout density on waste loading was also demonstrated. Mixes (at 0.60 w/cm) made with a Modular Caustic side extraction Unit (MCU) simulant and either OPC or BFS have higher cured grout densities than mixes made with premix and increase the WL to 709 mL/L for the OPC mix and 689 mL/L for the BFS mix versus the value of 653 mL/L for MCU in premix at 0.60 w/cm ratio. Bleed liquid reduces the waste loading and lowers the effective w/cm ratio of Saltstone. A method is presented (and will be used in future tasks) for correcting the waste loading and the w/cm ratio of the as-batched mixes in those cases where bleed liquid is present. For example, the Deliquification, Dissolution and Adjustment (DDA) mix at an as-batched 0.60 w/cm ratio, when corrected for % bleed, gives a mix with a 0.55 w/cm ratio and a WL that has been reduced from 662 to 625 mL/L. An example is provided that

  20. Plastic collapse load of corroded steel plates

    Indian Academy of Sciences (India)

    Rahbar Ranji Ahmad

    2012-06-01

    Corrosion is one of the detrimental phenomena which reduces strength of structures. It is common practice to assume a uniform thickness reduction for general corrosion. Since the actual corroded plate has rough surfaces, to estimate the remaining strength of corroded structures, typically a much higher level of accuracy is required. The main aim of present work is to study plastic collapse load of corroded steel plates with irregular surfaces under tension. Non-linear finite element method by using computer code ANSYS was employed to determine plastic collapse load. By comparing the results with uniform thickness assumption, a reduction factor was proposed. It is found that by uniform thickness assumption, plastic collapse load of corroded plates are overestimated.

  1. Enhanced Magnetic Trap Loading for Atomic Strontium

    CERN Document Server

    Barker, D S; Pisenti, N C; Campbell, G K

    2015-01-01

    We report on a technique to improve the continuous loading of atomic strontium into a magnetic trap from a Magneto-Optical Trap (MOT). This is achieved by adding a depumping laser tuned to the 3P1 to 3S1 (688-nm) transition. The depumping laser increases atom number in the magnetic trap and subsequent cooling stages by up to 65 % for the bosonic isotopes and up to 30 % for the fermionic isotope of strontium. We optimize this trap loading strategy with respect to the 688-nm laser detuning, intensity, and beam size. To understand the results, we develop a one-dimensional rate equation model of the system, which is in good agreement with the data. We discuss the use of other transitions in strontium for accelerated trap loading and the application of the technique to other alkaline-earth-like atoms.

  2. Enhanced magnetic trap loading for atomic strontium

    Science.gov (United States)

    Barker, D. S.; Reschovsky, B. J.; Pisenti, N. C.; Campbell, G. K.

    2015-10-01

    We report on a technique to improve the continuous loading of atomic strontium into a magnetic trap from a magneto-optical trap. This is achieved by adding a depumping laser tuned to the P31→S31 (688-nm) transition. The depumping laser increases atom number in the magnetic trap and subsequent cooling stages by up to 65% for the bosonic isotopes and up to 30% for the fermionic isotope of strontium. We optimize this trap loading strategy with respect to the 688-nm laser detuning, intensity, and beam size. To understand the results, we develop a one-dimensional rate equation model of the system, which is in good agreement with the data. We discuss the use of other transitions in strontium for accelerated trap loading and the application of the technique to other alkaline-earth-like atoms.

  3. Bucket foundations under lateral cyclic loading

    DEFF Research Database (Denmark)

    Foglia, Aligi

    -competitive in the energy market. This thesis addresses issues concerning monopod bucket foundations in the hope of providing tools and ideas that could be used to optimize the design of this sub-structure. The work is focussed on the behaviour of bucket foundations under lateral cyclic loading. Other related......To enable a prosperous development of offshore wind energy, economically feasible technologies must be developed. The monopod bucket foundation is likely to become a cost-effective sub-structure for offshore wind turbines and has the potential to make offshore wind more cost...... and propaedeutic topics, such as bucket foundations under transient lateral loading and under monotonic lateral loading, are also investigated. All the scientific work is fundamentally based on small-scale experimental tests of bucket foundations in dense water-saturated sand. The most important scientific...

  4. Bit Loading Algorithms for Cooperative OFDM Systems

    Directory of Open Access Journals (Sweden)

    Bo Gui

    2007-12-01

    Full Text Available We investigate the resource allocation problem for an OFDM cooperative network with a single source-destination pair and multiple relays. Assuming knowledge of the instantaneous channel gains for all links in the entire network, we propose several bit and power allocation schemes aiming at minimizing the total transmission power under a target rate constraint. First, an optimal and efficient bit loading algorithm is proposed when the relay node uses the same subchannel to relay the information transmitted by the source node. To further improve the performance gain, subchannel permutation, in which the subchannels are reallocated at relay nodes, is considered. An optimal subchannel permutation algorithm is first proposed and then an efficient suboptimal algorithm is considered to achieve a better complexity-performance tradeoff. A distributed bit loading algorithm is also proposed for ad hoc networks. Simulation results show that significant performance gains can be achieved by the proposed bit loading algorithms, especially when subchannel permutation is employed.

  5. Radio Frequency Power Load and Associated Method

    Science.gov (United States)

    Srinivasan, V. Karthik (Inventor); Freestone, Todd M. (Inventor); Sims, William Herbert, III (Inventor)

    2014-01-01

    A radio frequency power load and associated method. A radio frequency power load apparatus may include a container with an ionized fluid therein. The apparatus may include one conductor immersed in a fluid and another conductor electrically connected to the container. A radio frequency transmission system may include a radio frequency transmitter, a radio frequency amplifier connected to the transmitter and a radio frequency power load apparatus connected to the amplifier. The apparatus may include a fluid having an ion source therein, one conductor immersed in a fluid, and another conductor electrically connected to the container. A method of dissipating power generated by a radio frequency transmission system may include constructing a waveguide with ionized fluid in a container and connecting the waveguide to an amplifier of the transmission system.

  6. Bit Loading Algorithms for Cooperative OFDM Systems

    Directory of Open Access Journals (Sweden)

    Gui Bo

    2008-01-01

    Full Text Available Abstract We investigate the resource allocation problem for an OFDM cooperative network with a single source-destination pair and multiple relays. Assuming knowledge of the instantaneous channel gains for all links in the entire network, we propose several bit and power allocation schemes aiming at minimizing the total transmission power under a target rate constraint. First, an optimal and efficient bit loading algorithm is proposed when the relay node uses the same subchannel to relay the information transmitted by the source node. To further improve the performance gain, subchannel permutation, in which the subchannels are reallocated at relay nodes, is considered. An optimal subchannel permutation algorithm is first proposed and then an efficient suboptimal algorithm is considered to achieve a better complexity-performance tradeoff. A distributed bit loading algorithm is also proposed for ad hoc networks. Simulation results show that significant performance gains can be achieved by the proposed bit loading algorithms, especially when subchannel permutation is employed.

  7. Lower head integrity under steam explosion loads

    Energy Technology Data Exchange (ETDEWEB)

    Theofanous, T.G.; Yuen, W.W.; Angelini, S.; Freeman, K.; Chen, X.; Salmassi, T. [Center for Risk Studies and Safety, Univ. of California, Santa Barbara, CA (United States); Sienicki, J.J.

    1998-01-01

    Lower head integrity under steam explosion loads in an AP600-like reactor design is considered. The assessment is the second part of an evaluation of the in-vessel retention idea as a severe accident management concept, the first part (DOE/ID-10460) dealing with thermal loads. The assessment is conducted in terms of the Risk Oriented Accident Analysis Methodology (ROAAM), and includes the comprehensive evaluation of all relevant severe accident scenarios, melt conditions and timing of release from the core region, fully 3D mixing and explosion wave dynamics, and lower head fragility under local, dynamic loading. All of these factors and brought together in a ROAAM Probabilistic Framework to evaluate failure likelihood. The conclusion is that failure is `physically unreasonable`. (author)

  8. Load Carriage and the Female Soldier

    Directory of Open Access Journals (Sweden)

    Venerina Johnson

    2011-07-01

    Full Text Available This paper reviews the physiological, biomechanical and health impacts of load carriage on the female soldier and extends to include issues acknowledged as impacting on the female athlete and hence the female soldier. Physiological factors such as fat mass, strength, aerobic endurance and biomechanical factors such as stride length and forward lean have the potential to increase the energy cost of load carriage and cause injury. The female athlete triad, iron deficiency, pelvic floor muscle dysfunction and military equipment issues can likewise reduce female soldier performance and increase injury risk. Research evidence is presented to inform the development and implementation of performance optimisation and injury prevention strategies. Discussed strategies include structured physical conditioning, improving nutrition and hydration practices and modification of load carriage equipment to meet female soldier requirements.

  9. Optimal Load Dispatch Using Ant Lion Optimization

    Directory of Open Access Journals (Sweden)

    Menakshi Mahendru Nischal

    2015-08-01

    Full Text Available This paper presents Ant lion optimization (ALO technique to solve optimal load dispatch problem. Ant lion optimization (ALO is a novel nature inspired algorithm. The ALO algorithm mimics the hunting mechanism of ant lions in nature. Five main steps of hunting prey such as the random walk of ants, building traps, entrapment of ants in traps, catching preys, and re-building traps are implemented. Optimal load dispatch (OLD is a method of determining the most efficient, low-cost and reliable operation of a power system by dispatching available electricity generation resources to supply load on the system. The primary objective of OLD is to minimize total cost of generation while honoring operational constraints of available generation resources. The proposed technique is implemented on 3, 6 & 20 unit test system for solving the OLD. Numerical results shows that the proposed method has good convergence property and better in quality of solution than other algorithms reported in recent literature.

  10. Standardized Loads Acting in Hip Implants.

    Directory of Open Access Journals (Sweden)

    Georg Bergmann

    Full Text Available With the increasing success of hip joint replacements, the average age of patients has decreased, patients have become more active and their expectations of the implant durability have risen. Thus, pre-clinical endurance tests on hip implants require defining realistic in vivo loads from younger and more active patients. These loads require simplifications to be applicable for simulator tests and numerical analyses. Here, the contact forces in the joint were measured with instrumented hip implants in ten subjects during nine of the most physically demanding and frequent activities of daily living. Typical levels and directions of average and high joint loads were extracted from the intra- and inter-individually widely varying individual data. These data can also be used to analyse bone remodelling at the implant-bone interface, evaluate tissue straining in finite element studies or validate analytical loading predictions, among other uses. The current ISO standards for endurance tests of implant stems and necks are based on historic analytical data from the 1970s. Comparisons of these test forces with in vivo loads unveiled that their unidirectional orientations deviate from the time-dependent in vivo directions during walking and most other activities. The ISO force for testing the stem is substantially too low while the ISO force for the neck better matches typical in vivo magnitudes. Because the magnitudes and orientations of peak forces substantially vary among the activities, load scenarios that reflect a collection of time-dependent high forces should be applied rather than using unidirectional forces. Based on data from ten patients, proposals for the most demanding activities, the time courses of the contact forces and the required cycle numbers for testing are given here. Friction moments in the joint were measured in addition to the contact forces. The moment data were also standardized and can be applied to wear tests of the implant

  11. Standardized Loads Acting in Hip Implants.

    Science.gov (United States)

    Bergmann, Georg; Bender, Alwina; Dymke, Jörn; Duda, Georg; Damm, Philipp

    2016-01-01

    With the increasing success of hip joint replacements, the average age of patients has decreased, patients have become more active and their expectations of the implant durability have risen. Thus, pre-clinical endurance tests on hip implants require defining realistic in vivo loads from younger and more active patients. These loads require simplifications to be applicable for simulator tests and numerical analyses. Here, the contact forces in the joint were measured with instrumented hip implants in ten subjects during nine of the most physically demanding and frequent activities of daily living. Typical levels and directions of average and high joint loads were extracted from the intra- and inter-individually widely varying individual data. These data can also be used to analyse bone remodelling at the implant-bone interface, evaluate tissue straining in finite element studies or validate analytical loading predictions, among other uses. The current ISO standards for endurance tests of implant stems and necks are based on historic analytical data from the 1970s. Comparisons of these test forces with in vivo loads unveiled that their unidirectional orientations deviate from the time-dependent in vivo directions during walking and most other activities. The ISO force for testing the stem is substantially too low while the ISO force for the neck better matches typical in vivo magnitudes. Because the magnitudes and orientations of peak forces substantially vary among the activities, load scenarios that reflect a collection of time-dependent high forces should be applied rather than using unidirectional forces. Based on data from ten patients, proposals for the most demanding activities, the time courses of the contact forces and the required cycle numbers for testing are given here. Friction moments in the joint were measured in addition to the contact forces. The moment data were also standardized and can be applied to wear tests of the implant. It was shown that

  12. Compensator configurations for load currents' symmetrization

    Science.gov (United States)

    Rusinaru, D.; Manescu, L. G.; Dinu, R. C.

    2016-02-01

    This paper approaches aspects regarding the mitigation effects of asymmetries in 3-phase 3-wire networks. The measure consisting in connecting of load current symmetrization devices at the load coupling point is presented. A time-variation of compensators parameters is determined as a function of the time-recorded electrical values. The general sizing principle of the load current symmetrization reactive components is based on a simple equivalent model of the unbalanced 3-phase loads. By using these compensators a certain control of the power components transits is ensured in the network. The control is based on the variations laws of the compensators parameters as functions of the recorded electrical values: [B] = [T]·[M]. The link between compensator parameters and measured values is ensured by a transformation matrix [T] for each operation conditions of the supply network. Additional conditions for improving of energy and efficiency performance of the compensator are considered: i.e. reactive power compensation. The compensator sizing algorithm was implemented into a MATLAB environment software, which generate the time-evolution of the parameters of load current symmetrization device. The input data of application takes into account time-recording of the electrical values. By using the compensator sizing software, some results were achieved for the case of a consumer connected at 20 kV busbar of a distribution substation, during 24 hours measurement session. Even the sizing of the compensators aimed some additional network operation aspects (power factor correction) correlated with the total or major load symmetrizations, the harmonics aspects of the network values were neglected.

  13. Lightening the load: perceptual load impairs visual detection in typical adults but not in autism.

    Science.gov (United States)

    Remington, Anna M; Swettenham, John G; Lavie, Nilli

    2012-05-01

    Autism spectrum disorder (ASD) research portrays a mixed picture of attentional abilities with demonstrations of enhancements (e.g., superior visual search) and deficits (e.g., higher distractibility). Here we test a potential resolution derived from the Load Theory of Attention (e.g., Lavie, 2005). In Load Theory, distractor processing depends on the perceptual load of the task and as such can only be eliminated under high load that engages full capacity. We hypothesize that ASD involves enhanced perceptual capacity, leading to the superior performance and increased distractor processing previously reported. Using a signal-detection paradigm, we test this directly and demonstrate that, under higher levels of load, perceptual sensitivity was reduced in typical adults but not in adults with ASD. These findings confirm our hypothesis and offer a promising solution to the previous discrepancies by suggesting that increased distractor processing in ASD results not from a filtering deficit but from enhanced perceptual capacity.

  14. Voltage-Sensitive Load Controllers for Voltage Regulation and Increased Load Factor in Distribution Systems

    DEFF Research Database (Denmark)

    Douglass, Philip James; Garcia-Valle, Rodrigo; Østergaard, Jacob

    2014-01-01

    consumption which can be mapped to temperature setpoint offsets of thermostat controlled loads. In networks where a lower voltage level corresponds to high system load (and vice versa), this controller acts to regulate voltage and increase the load factor. Simulations are conducted on low- and medium-voltage......This paper presents a novel controller design for controlling appliances based on local measurements of voltage. The controller finds the normalized voltage deviation accounting for the sensitivity of voltage measurements to appliance state. The controller produces a signal indicating desired power...... distribution systems with residential loads including voltage-sensitive water heaters. In low-voltage systems, the results of the simulations show the controller to be effective at reducing the extremes of voltage and increasing the load factor while respecting end-use temperature constraints. In medium-voltage...

  15. Axial loaded MRI of the lumbar spine

    Energy Technology Data Exchange (ETDEWEB)

    Saifuddin, A. E-mail: asaifuddin@aol.com; Blease, S.; MacSweeney, E

    2003-09-01

    Magnetic resonance imaging is established as the technique of choice for assessment of degenerative disorders of the lumbar spine. However, it is routinely performed with the patient supine and the hips and knees flexed. The absence of axial loading and lumbar extension results in a maximization of spinal canal dimensions, which may in some cases, result in failure to demonstrate nerve root compression. Attempts have been made to image the lumbar spine in a more physiological state, either by imaging with flexion-extension, in the erect position or by using axial loading. This article reviews the literature relating to the above techniques.

  16. Large Scale Demand Response of Thermostatic Loads

    DEFF Research Database (Denmark)

    Totu, Luminita Cristiana

    This study is concerned with large populations of residential thermostatic loads (e.g. refrigerators, air conditioning or heat pumps). The purpose is to gain control over the aggregate power consumption in order to provide balancing services for the electrical grid. Without affecting...... the temperature limits and other operational constraints, and by using only limited communication, it is possible to make use of the individual thermostat deadband flexibility to step-up or step-down the power consumption of the population as if it were a power plant. The individual thermostatic loads experience...

  17. Pile Load Capacity – Calculation Methods

    Directory of Open Access Journals (Sweden)

    Wrana Bogumił

    2015-12-01

    Full Text Available The article is a review of the current problems of the foundation pile capacity calculations. The article considers the main principles of pile capacity calculations presented in Eurocode 7 and other methods with adequate explanations. Two main methods are presented: α – method used to calculate the short-term load capacity of piles in cohesive soils and β – method used to calculate the long-term load capacity of piles in both cohesive and cohesionless soils. Moreover, methods based on cone CPTu result are presented as well as the pile capacity problem based on static tests.

  18. Free Material Design with Multiple Load Cases

    DEFF Research Database (Denmark)

    Pedersen, Pauli; Pedersen, Niels Leergaard

    2012-01-01

    with a practical recursive design procedure is presented and illustrated with examples. The presented finite element analysis involve many elements as well as many load cases. Separating the local amount of material from a description with unit trace for the local anisotropy, gives the free materials formulation......Multiple load cases and the consideration of strength is a reality that most structural designs are exposed to. Improved possibility to produce specific materials, say by fiber lay-up, put focus on research on free material optimization. A formulation for such design problems together...

  19. Free Material Design with Multiple Load Cases

    DEFF Research Database (Denmark)

    Pedersen, Pauli; Pedersen, Niels Leergaard

    2012-01-01

    Multiple load cases and the consideration of strength is a reality that most structural designs are exposed to. Improved possibility to produce specific materials, say by fiber lay-up, put focus on research on free material optimization. A formulation for such design problems together...... with a practical recursive design procedure is presented and illustrated with examples. The presented finite element analysis involve many elements as well as many load cases. Separating the local amount of material from a description with unit trace for the local anisotropy, gives the free materials formulation...

  20. Sensitivity of Footbridge Response to Load Modeling

    DEFF Research Database (Denmark)

    Pedersen, Lars; Frier, Christian

    The paper considers a stochastic approach to modeling the actions of walking and has focus on the vibration serviceability limit state of footbridges. The use of a stochastic approach is novel but useful as it is more advanced than the quite simplistic deterministic load models seen in many desig...... matter to foresee their impact. The paper contributes by examining how some of these decisions influence the outcome of serviceability evaluations. The sensitivity study is made focusing on vertical footbridge response to single person loading....

  1. Feasability Study of Electronic Load Sensing Concept

    DEFF Research Database (Denmark)

    Hansen, Michael Rygaard; Andersen, Torben O.; Pedersen, Henrik C.

    2006-01-01

    to traditional LS-systems, in terms of better control and system utilization possibilities, combined with the increased acceptance and use of electronic sensors in mobile hydraulic machinery. The current work is to evaluate the suitability of an ELS concepts applied to a Sauer Danfoss Series 45 H-frame open......Electronic load sensing (ELS) systems have long been expected to start replacing traditional (hydro-mechanical) load sensing (LS) systems, which today are the standard on most medium and high-end mobile hydraulic applications. The reason for this being the potentials that ELS brings relative...

  2. Practical Hydrogen Loading of Air Silica Fibres

    DEFF Research Database (Denmark)

    Sørensen, Henrik Rokkjær; Jensen, Jesper Bevensee; Jensen, Jesper Bo Damm

    2005-01-01

    A method for hydrogen-loading air-silica optical fibres has been developed allowing out-diffusion times comparable to standard step-index fibres. Examples of the first grating written in Ge-doped air-silica fibres using a 266nm UV-laser are shown.......A method for hydrogen-loading air-silica optical fibres has been developed allowing out-diffusion times comparable to standard step-index fibres. Examples of the first grating written in Ge-doped air-silica fibres using a 266nm UV-laser are shown....

  3. Diffusion and bulk flow in phloem loading

    DEFF Research Database (Denmark)

    Dölger, Julia; Rademaker, Hanna; Liesche, Johannes

    2014-01-01

    loading mechanism, active symplasmic loading, also called the polymer trap mechanism, where sucrose is transformed into heavier sugars, such as raffinose and stachyose, in the intermediary-type companion cells bordering the sieve elements in the minor veins of the phloem. Keeping the heavier sugars from......%-20% to the sucrose flux into the intermediary cells, while the main part is transported by diffusion. On the other hand, the subsequent sugar translocation into the sieve elements would very likely be carried predominantly by bulk water flow through the plasmodesmata. Thus, in contrast to apoplasmic loaders, all...

  4. Chaotic Load Series Forecasting Based on MPMR

    Institute of Scientific and Technical Information of China (English)

    Liu Zunxiong; Cheng Quanhua; Zhang Deyun

    2006-01-01

    Minimax probability machine regression (MPMR) was proposed for chaotic load time series global prediction. In MPMR, regression function maximizes the minimum probability that future predication will be within an ε to the true regression function. After exploring the principle of MPMR, and verifying the chaotic property of the load series from a certain power system, one-day-ahead predictions for 24 time points next day were done with MPMR. The results demonstrate that MPMP has satisfactory prediction efficiency. Kernel function shape parameter and regression tube value may influence the MPMR-based system performance. In the experiments, cross validation was used to choose the two parameters.

  5. Fatigue Reliability under Multiple-Amplitude Loads

    DEFF Research Database (Denmark)

    Talreja, R.

    1979-01-01

    A method to determine the fatigue of structures subjected to multiple-amplitude loads is presented. Unlike the more common cumulative damage methods, which are usually based on fatigue life data, the proposed method is based on tensile strength data. Assuming the Weibull distribution...... for the initial tensile strength and the fatigue life, the probability distributions for the residual tensile strength in both the crack initiation and the crack propagation stages of fatigue are determined. The method is illustrated for two-amplitude loads by means of experimental results obtained by testing...

  6. Software agents for distributed load balancing

    Energy Technology Data Exchange (ETDEWEB)

    Wernstedt, F.; Davidsson, P. [Department of Systems and Software Engineering, School of Engineering, Blekinge Institute of Technology, Ronneby (Sweden)

    2004-07-01

    We present results from experiments where the effects of flow control at a single substation are compared to distributed flow control at multiple substations. The latter approach is made possible by equipping individual substations with some computing power and integrating them into a communications network. Software agents, who cooperate with other software agents (substations) and invoke time limited reductions to consumption, are embedded in each substation. The experiments show that it is possible to automatically load balance a small district heating network using agent technology, e.g., to perform automatic peak clipping and load shifting. (orig.)

  7. Shaft Center Orbit in Dynamically Loaded Bearings

    DEFF Research Database (Denmark)

    Klit, Peder

    The aim of this work is to demonstrate how to utilize the bearings damping coefficients to estimate the orbit for a dynamically loaded journal bearing. The classical method for this analysis was developed by Booker in 1965 and described further in 1972. Several authors have refined this method over...... Jorgen W. Lund pointed out in lecture notes that the dynamic damping coefficients of the bearing could be used to find the shaft orbit for dynamically loaded bearings. For simplicity the "Short-Width-Journal-Bearing Theory" is used as a basis for finding the damping coefficients in this work...

  8. Gust loading on streamlined bridge decks

    DEFF Research Database (Denmark)

    Larose, Guy; Mann, Jakob

    1998-01-01

    The current analytical description of the buffeting action of wind on long-span bridges is based on the strip assumption. However, recent experiments on closed-box girder bridge decks have shown that this assumption is not valid and is the source of an important part of the error margin...... of the analytical prediction methods. In this paper, an analytical model that departs from the strip assumption is used to describe the gust loading on a thin airfoil. A parallel is drawn between the analytical model and direct measurements of gust loading on motionless closed-box girder bridge decks. Empirical...

  9. Enhanced Magnetic Trap Loading for Atomic Strontium

    OpenAIRE

    Barker, D.S.; Reschovsky, B. J.; Pisenti, N. C.; Campbell, G. K.

    2015-01-01

    We report on a technique to improve the continuous loading of atomic strontium into a magnetic trap from a Magneto-Optical Trap (MOT). This is achieved by adding a depumping laser tuned to the 3P1 to 3S1 (688-nm) transition. The depumping laser increases atom number in the magnetic trap and subsequent cooling stages by up to 65 % for the bosonic isotopes and up to 30 % for the fermionic isotope of strontium. We optimize this trap loading strategy with respect to the 688-nm laser detuning, int...

  10. Functionally graded piezoelectric cantilever beam under load

    Energy Technology Data Exchange (ETDEWEB)

    Shi, Z.F.; Chen, Y. [Beijing Jiaotong University, School of Civil Engineering, Beijing (China)

    2004-12-01

    In the present paper, the problem of a functionally graded piezoelectric cantilever beam subjected to different loadings is studied. The piezoelectric beam is characterized by continuously graded properties for one elastic parameter and the material density. A pair of stress and induction functions in the form of polynomials is proposed and determined. Based on these functions, a set of analytical solutions for the beam subjected to different loadings is obtained. As particular cases, series of solutions for some canonical problems can be directly obtained from the solutions of the present paper, such as for the problems of a piezoelectric cantilever beam with constant body force or without body forces, etc. (orig.)

  11. Stochastic Extreme Load Predictions for Marine Structures

    DEFF Research Database (Denmark)

    Jensen, Jørgen Juncher

    1999-01-01

    Development of rational design criteria for marine structures requires reliable estimates for the maximum wave-induced loads the structure may encounter during its operational lifetime. The paper discusses various methods for extreme value predictions taking into account the non-linearity of the ......Development of rational design criteria for marine structures requires reliable estimates for the maximum wave-induced loads the structure may encounter during its operational lifetime. The paper discusses various methods for extreme value predictions taking into account the non...

  12. Sensitivity of Footbridge Response to Load Modeling

    DEFF Research Database (Denmark)

    Pedersen, Lars; Frier, Christian

    2012-01-01

    The paper considers a stochastic approach to modeling the actions of walking and has focus on the vibration serviceability limit state of footbridges. The use of a stochastic approach is novel but useful as it is more advanced than the quite simplistic deterministic load models seen in many design...... matter to foresee their impact. The paper contributes by examining how some of these decisions influence the outcome of serviceability evaluations. The sensitivity study is made focusing on vertical footbridge response to single person loading....

  13. Sensitivity of Footbridge Response to Load Modeling

    DEFF Research Database (Denmark)

    Pedersen, Lars; Frier, Christian

    The paper considers a stochastic approach to modeling the actions of walking and has focus on the vibration serviceability limit state of footbridges. The use of a stochastic approach is novel but useful as it is more advanced than the quite simplistic deterministic load models seen in many design...... matter to foresee their impact. The paper contributes by examining how some of these decisions influence the outcome of serviceability evaluations. The sensitivity study is made focusing on vertical footbridge response to single person loading....

  14. Predicting Footbridge Response using Stochastic Load Models

    DEFF Research Database (Denmark)

    Pedersen, Lars; Frier, Christian

    2013-01-01

    Walking parameters such as step frequency, pedestrian mass, dynamic load factor, etc. are basically stochastic, although it is quite common to adapt deterministic models for these parameters. The present paper considers a stochastic approach to modeling the action of pedestrians, but when doing s...... as it pinpoints which decisions to be concerned about when the goal is to predict footbridge response. The studies involve estimating footbridge responses using Monte-Carlo simulations and focus is on estimating vertical structural response to single person loading....

  15. Pressure Hull Analysis under Shock Loading

    Directory of Open Access Journals (Sweden)

    Ya-Jung Lee

    2008-01-01

    Full Text Available The hull of high performance submarines must resist underwater shock loading due to exploding torpedoes or depth bombs. An underwater shock involving an initial shock wave and successive bubble pulsating waves is so complex that a theoretical technique for deriving shock pressure distribution is required for improving simulation efficiency. Complete shock loading is obtained theoretically in this work, and responses of a submarine pressure hull are calculated using ABAQUS USA (Underwater Shock Analysis codes. In the long run, this deflection and stress data will assist in examining the structural arrangement of the submarine pressure hull.

  16. Monopod bucket foundations under cyclic lateral loading

    OpenAIRE

    Foglia, Aligi; Ibsen, Lars Bo

    2014-01-01

    The monopod bucket foundation can be a cost-reducing sub-structure for offshore wind turbines. To avoid problems during the turbine operation, the long-term effect of cyclic loading must be considered in the design of the foundation. In this paper a 1g testing rig is adopted to extend the knowledge on bucket foundations under lateral cyclic loading. The test setup is described in detail and a comprehensive experimental campaign is presented. The foundation is subjected to cyclic overturning m...

  17. Attentional sets influence perceptual load effects, but not dilution effects.

    Science.gov (United States)

    Benoni, Hanna; Zivony, Alon; Tsal, Yehoshua

    2014-01-01

    Perceptual load theory [Lavie, N. (1995). Perceptual load as a necessary condition for selective attention. Journal of Experimental Psychology: Human Perception and Performance, 21, 451-468.; Lavie, N., & Tsal, Y. (1994) Perceptual load as a major determinant of the locus of selection in visual attention. Perception & Psychophysics, 56, 183-197.] proposes that interference from distractors can only be avoided in situations of high perceptual load. This theory has been supported by blocked design manipulations separating low load (when the target appears alone) and high load (when the target is embedded among neutral letters). Tsal and Benoni [(2010a). Diluting the burden of load: Perceptual load effects are simply dilution effects. Journal of Experimental Psychology: Human Perception and Performance, 36, 1645-1656.; Benoni, H., & Tsal, Y. (2010). Where have we gone wrong? Perceptual load does not affect selective attention. Vision Research, 50, 1292-1298.] have recently shown that these manipulations confound perceptual load with "dilution" (the mere presence of additional heterogeneous items in high-load situations). Theeuwes, Kramer, and Belopolsky [(2004). Attentional set interacts with perceptual load in visual search. Psychonomic Bulletin & Review, 11, 697-702.] independently questioned load theory by suggesting that attentional sets might also affect distractor interference. When high load and low load were intermixed, and participants could not prepare for the presentation that followed, both the low-load and high-load trials showed distractor interference. This result may also challenge the dilution account, which proposes a stimulus-driven mechanism. In the current study, we presented subjects with both fixed and mixed blocks, including a mix of dilution trials with low-load trials and with high-load trials. We thus separated the effect of dilution from load and tested the influence of attentional sets on each component. The results revealed that whereas

  18. Dynamic Loads Due to Synchronized Movements of People

    DEFF Research Database (Denmark)

    Hansen, S.O.; Sørensen, John Dalsgaard

    2002-01-01

    , and the paper focus on the load harmonics determining the load effects o f synchronized movements. The Jack of load correlation is determined by correlation coefficients, which are specified as fimetion o f the load harmonic considered. The model is calibrated to measured data and simplified procedures...

  19. Comparison of Deterministic and Probabilistic Radial Distribution Systems Load Flow

    Science.gov (United States)

    Gupta, Atma Ram; Kumar, Ashwani

    2017-08-01

    Distribution system network today is facing the challenge of meeting increased load demands from the industrial, commercial and residential sectors. The pattern of load is highly dependent on consumer behavior and temporal factors such as season of the year, day of the week or time of the day. For deterministic radial distribution load flow studies load is taken as constant. But, load varies continually with a high degree of uncertainty. So, there is a need to model probable realistic load. Monte-Carlo Simulation is used to model the probable realistic load by generating random values of active and reactive power load from the mean and standard deviation of the load and for solving a Deterministic Radial Load Flow with these values. The probabilistic solution is reconstructed from deterministic data obtained for each simulation. The main contribution of the work is: - Finding impact of probable realistic ZIP load modeling on balanced radial distribution load flow. - Finding impact of probable realistic ZIP load modeling on unbalanced radial distribution load flow. - Compare the voltage profile and losses with probable realistic ZIP load modeling for balanced and unbalanced radial distribution load flow.

  20. Transient Monotonic and Cyclic Load Effects on Mono Bucket Foundations

    DEFF Research Database (Denmark)

    Nielsen, Søren Dam

    and when hitting the foundation they induce high impact loads with a short duration. It is important that the foundation is able to resists these huge loads. Fortunately, the conducted research showed that the capacity of the mono bucket foundation is high to impact loads. When exposed to a huge wave load...

  1. 14 CFR 23.363 - Side load on engine mount.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Side load on engine mount. 23.363 Section....363 Side load on engine mount. (a) Each engine mount and its supporting structure must be designed for a limit load factor in a lateral direction, for the side load on the engine mount, of not less...

  2. Energy efficiency analysis of reconfigured distribution system for practical loads

    Directory of Open Access Journals (Sweden)

    Pawan Kumar

    2016-09-01

    Full Text Available In deregulated rate structure, the performance evaluation of distribution system for energy efficiency includes; loss minimization, improved power quality, loadability limit, reliability and availability of supply. Energy efficiency changes with the variation in loading pattern and the load behaviour. Further, the nature of load at each node is not explicitly of any one type rather their characteristics depend upon the node voltages. In most cases, load is assumed to be constant power (real and reactive. In this paper voltage dependent practical loads are represented with composite load model and the energy efficiency performance of distribution system for practical loads is evaluated in different configurations of 33-node system.

  3. Dual targeting strategy of magnetic nanoparticle-loaded and RGD peptide-activated stimuli-sensitive polymeric micelles for delivery of paclitaxel

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Meng Meng [Tsinghua University, Department of Chemical Engineering (China); Kang, Yoon Joong [Jungwon University, Department of Biomedical Science (Korea, Republic of); Sohn, Youngjoo [Kyung Hee University, Department of Anatomy, College of Korean Medicine (Korea, Republic of); Kim, Do Kyung, E-mail: eurokorean@gmail.com, E-mail: dokyung@konyang.ac.kr [Konyang University, Industry Cooperation Foundation (Korea, Republic of)

    2015-06-15

    A double targeting strategy of anti-neoplastic agent paclitaxel (PTX) was developed by incorporating magnetic nanoparticles and RGD peptide for enhanced cell cytotoxicity effect at lower dosage. A dual targeting mechanism including magnetic targeting and RGD ligand-specific targeting enhanced the overall cytotoxicity and reduced the effective dosage of PTX to achieve enhanced and sustained release of PTX in vitro. We addressed the issues of water-insolubility of oleic acid (OA)-stabilized SPIONs and low incorporation efficiency of hydrophobic PTX with SPION nanocarriers by using an amphiphilic polymer poly[(N-isopropylacrylamide-r-acrylamide)-b-l-lactic acid] (PNAL) as micelle-forming materials. A targeting moiety, GGGGRGD peptide, a RGD sequence-containing peptide with a short linker, is attached to the surface of PNAL-SPIONs via a homo-crosslinker. Confocal microscopy image analysis revealed that the cellular uptake was increased from (1.5 ± 0.5 % (PNAL) to 11.7 ± 0.8 % (RGD-PNAL-SPIONs) at 6 h incubation, once both RGD peptide and magnetic force attraction were incorporated into the carriers. Such multi-targeting nanocarriers showed promising potential in cancer-oriented diagnosis and therapy.

  4. Methods for determination of ultimate load of eccentrically patch loaded steel I-girders

    Directory of Open Access Journals (Sweden)

    Šćepanović, B.

    2014-12-01

    Full Text Available Experimental tests show that most eccentrically patch loaded steel I-girders have a collapse mode quite different from that of centrically loaded girders. Concerning engineering practice, the most important difference between collapse modes is in ultimate load. The reduction in ultimate load with an increase in load eccentricity is obvious in some eccentrically loaded girders. Under certain circumstances, for a certain combination of influential parameters, eccentrically loaded girders behave as if loaded in the web plane, with no or no significant reduction in ultimate load due to load eccentricity. Dealing with such a big number of mutually dependant parameters that influence collapse mode and level of ultimate load reduction due to load eccentricity, still without theoretical formulation of collapse mechanism, two approaches for ultimate load determination are analysed: empirical mathematical expressions and artificial neural networks forecast models. Results of two procedures are compared. Recommendations for application in engineering practice are given.Las pruebas experimentales muestran que la mayoría de vigas en I de acero cargadas excéntricamente tienen un modo de colapso muy diferente del de las vigas cargadas centradas. En cuanto a la práctica de ingeniería, la diferencia más importante entre los modos de colapso es la carga final. La reducción de la carga última con un aumento de la excentricidad de carga es evidente en algunas vigas cargadas excéntricamente, mientras que bajo ciertas circunstancias, para una determinada combinación de parámetros influyentes, las vigas cargadas excéntricamente se comportan como si se carga en el plano del alma, con ninguna reducción significativa en la carga última debido a la carga excéntrica. Se analizan dos métodos para la determinación de la carga máxima: expresiones matemáticas empíricas y redes neuronales artificiales. Los resultados de ambos procedimientos se comparan. Se

  5. Measurement-based load modeling: Theory and application

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Load model is one of the most important elements in power system operation and control. However, owing to its complexity, load modeling is still an open and very difficult problem. Summarizing our work on measurement-based load modeling in China for more than twenty years, this paper systematically introduces the mathematical theory and applications regarding the load modeling. The flow chart and algorithms for measurement-based load modeling are presented. A composite load model structure with 13 parameters is also proposed. Analysis results based on the trajectory sensitivity theory indicate the importance of the load model parameters for the identification. Case studies show the accuracy of the presented measurement-based load model. The load model thus built has been validated by field measurements all over China. Future working directions on measurement- based load modeling are also discussed in the paper.

  6. Load Response Analysis of Asphalt Pavement

    Directory of Open Access Journals (Sweden)

    Xiao Zhijun

    2016-01-01

    Full Text Available Based on the filed data of Fuzhou test road, load response regulation of nonlinear pavement structure was analyzed in this paper; Mechanics software was adopted to analyze linear elastic and nonlinear of the pavement structure, analyzed results and road filed data were compared, and determine the correlation between them and the field data.

  7. A heavy load for heavy ions

    CERN Multimedia

    2003-01-01

    On 25 September, the two large coils for the dipole magnet of ALICE, the LHC experiment dedicated to heavy ions, arrived at Point 2 on two heavy load trucks after a 1200 km journey from their assembly in Vannes, France.

  8. Curable off-loading footwear and methods

    DEFF Research Database (Denmark)

    2007-01-01

    Custom footbed devices, methods of constructing the devices and kits for constructing custom footbeds are disclosed that may be particularly advantageous in the treatment of plantar ulcers. The devices offer the advantage of off-loading pressure from the plantar ulcers in a device that is easy...

  9. ANTHROPOGENIC LOAD ON RIVERS OF URBAN AREAS

    Directory of Open Access Journals (Sweden)

    Kurochkina Valentina Aleksandrovna

    2016-08-01

    Full Text Available The increasing speed of urbanization and population growth lead to the increasing anthropogenic load on water bodies. The urbanization processes in Russia are more intensive than in other countries. The dense population and great industrial potential lead to the fact that the urbanized territories become the main sources of water pollution. That’s why the environmental control of the state of water objects is needed. In the article the authors study the problem of anthropogenic load impact on river hydraulics processes and on the properties of river sediments that determine river channels evolution and general ecological state of water bodies. The interrelation between ecological state of water bodies, the quality of water in it and the level of contamination with sediments was determined. It is established that the conditions of long-term aquatic life as a whole and of water quality in particular depend on the contamination level with sediments. The author proposes a method of estimation of anthropogenic load on rivers. The paper analyses the calculation results of the value of anthropogenic load on different rivers of Russia.

  10. 1995 Pacific Northwest Loads and Resources Study.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    1995-12-01

    The study establishes the planning basis for supplying electricity to customers. The study presents projections of regional and Federal system load and resource capabilities, and serves as a benchmark for annual BPA determinations made pursuant to the 1981 regional power sales contracts.

  11. Wind loads on solar energy roofs

    NARCIS (Netherlands)

    Geurts, C.P.W.; Bentum, C.A. van

    2007-01-01

    This paper presents an overview of the wind loads on roofs, equipped with solar energy products, so called Active Roofs. Values given in this paper have been based on wind tunnel and full scale measurements, carried out at TNO, and on an interpretation of existing rules and guidelines. The results a

  12. Neural Network Algorithm for Particle Loading

    Energy Technology Data Exchange (ETDEWEB)

    J. L. V. Lewandowski

    2003-04-25

    An artificial neural network algorithm for continuous minimization is developed and applied to the case of numerical particle loading. It is shown that higher-order moments of the probability distribution function can be efficiently renormalized using this technique. A general neural network for the renormalization of an arbitrary number of moments is given.

  13. Load sharing in models with communication delays

    NARCIS (Netherlands)

    Geest, R.A.B. van der

    1994-01-01

    Computer systems may be connected in a network to share workload. A control problem then is to decide which computer should carry out which task. Novel in this report is a model for load sharing with communication delays. It takes nonnegligible time for information from one computer to reach the oth

  14. Technical note: Spine loading in automotive seating

    NARCIS (Netherlands)

    Zenk, R.; Franz, M.; Bubb, H.; Vink, P.

    2012-01-01

    For car manufacturers, seat comfort is becoming more important in distinguishing themselves from their competitors. Therefore, many studies on participative seat comfort are carried out. In this paper, an objective assessment approach is reported which evaluates the concept of "optimal load distribu

  15. Distraction and mind-wandering under load

    Directory of Open Access Journals (Sweden)

    Sophie eForster

    2013-05-01

    Full Text Available Attention research over the last several decades has provided rich insights into the determinants of distraction, including distractor characteristics, task features and individual differences. Load Theory represented a particularly important breakthrough, highlighting the critical role of the level and nature of task load in determining both the efficiency of distractor rejection and the stage of processing at which this occurs. However, until recently studies of distraction were restricted to those measuring rather specific forms of distraction by external stimuli which I argue that, although intended to be irrelevant, were in fact task-relevant. In daily life, attention may be distracted by a wide range of stimuli, which may often be entirely unrelated to any task being performed, and may include not only external stimuli but also internally generated stimuli such as task-unrelated thoughts. This review outlines recent research examining these more general, entirely task-irrelevant, forms of distraction within the framework of Load Theory. I discuss the relation between different forms of distraction, and the universality of load effects across different distractor types and individuals.

  16. Load Management in District Heating Operation

    DEFF Research Database (Denmark)

    Li, Hongwei; Wang, Stephen Jia

    2015-01-01

    heating load can be reduced through building demand side management. The building thermal mass can be used to shift the heating supply under the circumstance without jeopardizing the consumer thermal comfort. In this paper, the multi-agent framework is applied to a simplified building dynamic model...

  17. Measuring Cognitive Load in Embodied Learning Settings

    Directory of Open Access Journals (Sweden)

    Alexander Skulmowski

    2017-08-01

    Full Text Available In recent years, research on embodied cognition has inspired a number of studies on multimedia learning and instructional psychology. However, in contrast to traditional research on education and multimedia learning, studies on embodied learning (i.e., focusing on bodily action and perception in the context of education in some cases pose new problems for the measurement of cognitive load. This review provides an overview over recent studies on embodied learning in which cognitive load was measured using surveys, behavioral data, or physiological measures. The different methods are assessed in terms of their success in finding differences of cognitive load in embodied learning scenarios. At the same time, we highlight the most important challenges for researchers aiming to include these measures into their study designs. The main issues we identified are: (1 Subjective measures must be appropriately phrased to be useful for embodied learning; (2 recent findings indicate potentials as well as problematic aspects of dual-task measures; (3 the use of physiological measures offers great potential, but may require mobile equipment in the context of embodied scenarios; (4 meta-cognitive measures can be useful extensions of cognitive load measurement for embodied learning.

  18. A closer look at salt loaded microstructures

    NARCIS (Netherlands)

    Rooij, M.R. de

    2006-01-01

    Many walls of ancient buildings are covered with plaster layers. Amongst the most recurrent causes of damage of plasters and substrates are moisture and salt decay processes. To combat these salt problems, special salt resistant plasters have been developed for application on salt loaded substrates.

  19. Electricity load modelling using computational intelligence

    NARCIS (Netherlands)

    Ter Borg, R.W.

    2005-01-01

    As a consequence of the liberalisation of the electricity markets in Europe, market players have to continuously adapt their future supply to match their customers' demands. This poses the challenge of obtaining a predictive model that accurately describes electricity loads, current in this thesis.

  20. Foot Marching, Load Carriage, and Injury Risk

    Science.gov (United States)

    2016-05-01

    following contribute to injury risk:  Individual Physical Factors. Because load-carrige alters biomechanical posture , individual body size, bone...5 Mortar round 4 Poncho and extra clothing 5 Meals ready to eat (MREs), 2 3 Medical IV fluid bag 1.5 Personal hygiene kit 2.5 Rope, and other

  1. Robust Multimodal Cognitive Load Measurement II

    Science.gov (United States)

    2015-06-24

    and GSR values. 15. SUBJECT TERMS Behavioural Science, Cognitive Psychology 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF...findings support our case. Experiment : We use data from a larger multitier experiment that was designed to study effects of cognitive load on... experiment was conducted through a simulated computer-based platform to screen applicants for a human resource department. Every subject interacted

  2. Cyclic Triaxial Loading of Cohesionless Silty Sand

    DEFF Research Database (Denmark)

    Sabaliauskas, Tomas; Ibsen, Lars Bo

    2015-01-01

    To engineer efficient structures offshore, we need to extend our knowledge of soil response. Cyclic loading and high water pressure encountered offshore greatly influence cohesionless soil performance. Silty sand from Frederikshavn wind turbine farm was tested using single diameter height samples...

  3. Floor vibrations due to walking loads

    NARCIS (Netherlands)

    Donkervoort, D.R.; Hoenderkamp, J.C.D.; Oosterhout, G.P.C. van

    1999-01-01

    Traditionally floors are designed for static strength and stiffness. Improved methods of construction and design, using high strength-lightweight materials, have resulted in strong and stiff floors that display unsatisfactory dynamic behaviour when exposed to walking loads. The paper discusses a met

  4. Monopod bucket foundations under cyclic lateral loading

    DEFF Research Database (Denmark)

    Foglia, Aligi; Ibsen, Lars Bo

    The monopod bucket foundation can be a cost-reducing sub-structure for offshore wind turbines. To avoid problems during the turbine operation, the long-term effect of cyclic loading must be considered in the design of the foundation. In this paper a 1g testing rig is adopted to extend the knowled...

  5. Monopod Bucket Foundations Under Cyclic Lateral Loading

    DEFF Research Database (Denmark)

    Foglia, Aligi; Ibsen, Lars Bo

    2016-01-01

    The monopod bucket foundation has the potential to become a cost-reducing substructure for offshore wind turbines. To avoid problems during the energy converter operation, the long-term effect of cyclic loading must be considered in the design of the foundation. In this paper, a 1-g testing rig i...

  6. Dust Load on Surfaces in Animal Buildings

    DEFF Research Database (Denmark)

    Lengweiler, P.; Strøm, J. S.; Takai, H.

    To investigate the physical process of particle deposition on and resuspension from surfaces in animal buildings, a test facility and a sampling method is established. The influences of surface orientation and air turbulence and velocity just as other parameters on the dust load on a surface...

  7. Robust control investigations for equipment loaded panels

    DEFF Research Database (Denmark)

    Aglietti, G.S.; Langley, R.S.; Rogers, E.

    1998-01-01

    This paper develops a modelling technique for equipment load panels which directly produces (adequate) models of the underlying dynamics on which to base robust controller design/evaluations. This technique is based on the use of the Lagrange's equations of motion and the resulting models...

  8. Load Carriage Induced Alterations of Pulmonary Function

    Science.gov (United States)

    1989-01-01

    pulmonar , function reductions are directh’ related to the backpack load carried due to the mechanical constraint it imposes on the thoracic cage.2 To...and Fish- man. A.P.. 1965. The regulation of venttlation in diffuse Agostor. E.. D’Angelc, E. and Piolini, M., 1978. Breathing pulmonary fibrosis . J

  9. Determining mental load through measuring brain signals

    NARCIS (Netherlands)

    Brouwer, A.M.; Erp, J.B.F. van

    2012-01-01

    How can you tell whether someone working or gaming is mentally taxed too high or too low? In collaboration with Noldus IT (Wageningen) and the FC Donders Institute (Nijmegen), TNO designed and conducted an experiment to measure mental load through brain signals. 35 participants performed a computer

  10. Distraction and mind-wandering under load.

    Science.gov (United States)

    Forster, Sophie

    2013-01-01

    Attention research over the last several decades has provided rich insights into the determinants of distraction, including distractor characteristics, task features, and individual differences. Load Theory represented a particularly important breakthrough, highlighting the critical role of the level and nature of task-load in determining both the efficiency of distractor rejection and the stage of processing at which this occurs. However, until recently studies of distraction were restricted to those measuring rather specific forms of distraction by external stimuli which I argue that, although intended to be irrelevant, were in fact task-relevant. In daily life, attention may be distracted by a wide range of stimuli, which may often be entirely unrelated to any task being performed, and may include not only external stimuli but also internally generated stimuli such as task-unrelated thoughts. This review outlines recent research examining these more general, entirely task-irrelevant, forms of distraction within the framework of Load Theory. I discuss the relation between different forms of distraction, and the universality of load effects across different distractor types and individuals.

  11. CDMA coverage under mobile heterogeneous network load

    NARCIS (Netherlands)

    Saban, D.; van den Berg, Hans Leo; Boucherie, Richardus J.; Endrayanto, A.I.

    2002-01-01

    We analytically investigate coverage (determined by the uplink) under non-homogeneous and moving traffic load of third generation UMTS mobile networks. In particular, for different call assignment policies, we investigate cell breathing and the movement of the coverage gap occurring between cells

  12. CDMA coverage under mobile heterogeneous network load

    NARCIS (Netherlands)

    Saban, Dorin; Berg, van den Hans; Boucherie, Richard J.; Endrayanto, Irwan

    2002-01-01

    We analytically investigate coverage (determined by the uplink) under non-homogeneous and moving traffic load of third generation UMTS mobile networks. In particular, for different call assignment policies, we investigate cell breathing and the movement of the coverage gap occurring between cells wh

  13. Results of Questionnaire on Faculty Work Load.

    Science.gov (United States)

    Felder, Rodney

    A questionnaire on faculty work load was sent to the presidents of 57 colleges selected at random except for 3 factors: universities and colleges of the City University of NY were not included; the emphasis was on private institutions; colleges selected were primarily in the south, east and midwest. Of the 39 or 68.4% replies, 35 were from private…

  14. Effects of Cognitive Load on Speech Recognition

    Science.gov (United States)

    Mattys, Sven L.; Wiget, Lukas

    2011-01-01

    The effect of cognitive load (CL) on speech recognition has received little attention despite the prevalence of CL in everyday life, e.g., dual-tasking. To assess the effect of CL on the interaction between lexically-mediated and acoustically-mediated processes, we measured the magnitude of the "Ganong effect" (i.e., lexical bias on phoneme…

  15. Forward Scattering of Loaded and Unloaded Antennas

    DEFF Research Database (Denmark)

    Gustafsson, Mats; Andersen, Jørgen Bach; Kristensson, Gerhard

    2012-01-01

    of the antenna structure. Here, the forward-scattering sum rule is experimentally verified for loaded, short-circuit, and open-circuit cylindrical dipole antennas. It is also shown that the absorption efficiency cannot be greater than 1/2 for reciprocal linearly polarized lossless matched antennas...

  16. Material properties under intensive dynamic loading

    CERN Document Server

    Cherne, Frank J; Zhernokletov, Mikhail V; Glushak, B L; Zocher, Marvin A

    2007-01-01

    Understanding the physical and thermomechanical response of materials subjected to intensive dynamic loading is a challenge of great significance in engineering today. This volume assumes the task of gathering both experimental and diagnostic methods in one place, since not much information has been previously disseminated in the scientific literature.

  17. Immediate implant loading: A case report

    OpenAIRE

    Dhamankar, Dilip; Gupta, Arun R.; Mahadevan, Janani

    2010-01-01

    Dental implants have long provided an excellent treatment option to restore edentulous spaces. Successful formation of a direct bone to implant interface is the goal in implant therapy. Immediate loading is an alternative to two stage surgical procedure. Improved surgical instrumentation implants design, and surface topography changes the concept of two stages surgical to one stage surgical procedure.

  18. Mechanical Predictors of Discomfort during Load Carriage.

    Science.gov (United States)

    Wettenschwiler, Patrick D; Lorenzetti, Silvio; Stämpfli, Rolf; Rossi, René M; Ferguson, Stephen J; Annaheim, Simon

    2015-01-01

    Discomfort during load carriage is a major issue for activities using backpacks (e.g. infantry maneuvers, children carrying school supplies, or outdoor sports). It is currently unclear which mechanical parameters are responsible for subjectively perceived discomfort. The aim of this study was to identify objectively measured mechanical predictors of discomfort during load carriage. We compared twelve different configurations of a typical load carriage system, a commercially available backpack with a hip belt. The pressure distribution under the hip belt and the shoulder strap, as well as the tensile force in the strap and the relative motion of the backpack were measured. Multiple linear regression analyses were conducted to investigate possible predictors of discomfort. The results demonstrate that static peak pressure, or alternatively, static strap force is a significant (pbackpack with hip belt, static strap force is the most valuable predictor of discomfort. The regionally differing regression coefficients of both predictors imply that the hip region is significantly more tolerant than the shoulder region. In order to minimize discomfort, users should be encouraged to shift load from the shoulders to the hip region wherever possible, at the same time likely decreasing the risk of low back pain or injury.

  19. The chemistry induced by mechanical load

    CERN Document Server

    Frank, Irmgard

    2016-01-01

    Results in the field of mechanochemistry are summarized. For example under mechanical load often a solvolysis is observed instead of a simple homolytic bond rupture. Also a mechanically induced redox reaction was reported experimentally and could be modelled theoretically. With CPMD simulations it is possible to understand multi-step mechanisms in full detail.

  20. Lower limb loading in step aerobic dance.

    Science.gov (United States)

    Wu, H-W; Hsieh, H-M; Chang, Y-W; Wang, L-H

    2012-11-01

    Participation in aerobic dance is associated with a number of lower extremity injuries, and abnormal joint loading seems to be a factor in these. However, information on joint loading is limited. The purpose of this study was to investigate the kinetics of the lower extremity in step aerobic dance and to compare the differences of high-impact and low-impact step aerobic dance in 4 aerobic movements (mambo, kick, L step and leg curl). 18 subjects were recruited for this study. High-impact aerobic dance requires a significantly greater range of motion, joint force and joint moment than low-impact step aerobic dance. The peak joint forces and moments in high-impact step aerobic dance were found to be 1.4 times higher than in low-impact step aerobic dance. Understanding the nature of joint loading may help choreographers develop dance combinations that are less injury-prone. Furthermore, increased knowledge about joint loading may be helpful in lowering the risk of injuries in aerobic dance instructors and students.