WorldWideScience

Sample records for ptw roos chambers

  1. [Experimental investigation of the collection efficiency of a PTW Roos ionization chamber irradiated with pulsed beams at high pulse dose with different pulse lengths].

    Science.gov (United States)

    Karsch, Leonhard; Richter, Christian; Pawelke, Jörg

    2011-01-01

    In gas-filled ionization chambers as radiation detectors, the collection of the charge carriers is affected by the recombination effect. In dosimetry this effect must be accounted for by the saturation correction factor k(S). The physical description of the correction factor by Boag, Hochhäuser and Balk for pulsed radiation is well established. However, this description is only accurate when the pulse length is short compared to the collection time of the ionization chamber. In this work experimental investigations of the saturation correction factor have been made for pulses of 4 μ s up to pulse doses of about 230 mGy, and the theory of Boag, Hochhäuser and Balk was again confirmed. For longer pulses, however, the correction factor decreases and at a pulse duration of about 200μs reaches 75% of the value valid for short pulses. This reduced influence of the ion recombination is interpreted by the reaction kinetics of ion recombination as a second-order reaction. This effect is negligible for PTW Roos chambers at clinical linear accelerators with 4 μ s pulse duration for pulse doses up to 120 mGy.

  2. Performance of a Roos ionization chamber in gamma radiation beams ({sup 60}Co)

    Energy Technology Data Exchange (ETDEWEB)

    Perini, Ana P.; Neves, Lucio P.; Caldas, Linda V.E., E-mail: lcaldas@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2011-07-01

    Among the different types of dosimetry instruments, the ionization chambers are the most practical and and important radiation measurement devices due to their high sensitivity and relatively constant response within a wide range of energies. A commercial PTW ionization chamber (Roos electron chamber) usually utilized in X-ray beams, was tested to verify the possibility of its dosimetric application in {sup 60}Co beams. The main tests in this work were: short- and long-term stability, saturation, ion collection efficiency, polarity effect, leakage current and angular dependence. The characterization tests were performed using a Gammatron {sup 60}Co irradiator and a special goniometer made of PMMA. All results were within international recommendations. The reproducibility test presented results within the recommended limit of {+-}1%, and all coefficients of variation observed in the repeatability test were lower than {+-}0.07%. The ion collection efficiency was better than 99.9% for both polarities. For all pairs of polarity evaluated during the saturation test, the polarity effect was lower than the recommended limit. The maximum variation obtained for angular dependence test was only 0.5%. The chamber tested in this work achieved the expected results in the case of all pre-operational tests realized: stability, leakage current, angular dependence, saturation, ion collection and polarity effect. Evaluating the satisfactory results obtained, it is possible to indicate the usefulness of this ionization chamber for dosimetry in {sup 60}Co gamma radiation beams. (author)

  3. On the property of measurements with the PTW microLion chamber in continuous beams

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Jonas; Johansson, Erik; Toelli, Heikki [Department of Radiation Sciences, Radiation Physics, Umea University, SE-901 85 Umea (Sweden); Swedish Defense Research Agency, FOI CBRN Defense and Security, SE-901 82 Umea (Sweden); Department of Radiation Sciences, Radiation Physics, Umea University, SE-901 85 Umea (Sweden)

    2012-08-15

    Purpose: The performance of liquid ionization chambers, which may prove to be useful tools in the field of radiation dosimetry, is based on several chamber and liquid specific characteristics. The present work investigates the performance of the PTW microLion liquid ionization chamber with respect to recombination losses and perturbations from ambient electric fields at various dose rates in continuous beams. Methods: In the investigation, experiments were performed using two microLion chambers, containing isooctane (C{sub 8}H{sub 18}) and tetramethylsilane [Si(CH{sub 3}){sub 4}] as the sensitive media, and a NACP-02 monitor chamber. An initial activity of approximately 250 GBq {sup 18}F was employed as the radiation source in the experiments. The initial dose rate in each measurement series was estimated to 1.0 Gy min{sup -1} by Monte Carlo simulations and the measurements were carried out during the decay of the radioactive source. In the investigation of general recombination losses, employing the two-dose-rate method for continuous beams, the liquid ionization chambers were operated at polarizing voltages 25, 50, 100, 150, 200, and 300 V. Furthermore, measurements were also performed at 500 V polarizing voltage in the investigation of the sensitivity of the microLion chamber to ambient electric fields. Results: The measurement results from the liquid ionization chambers, corrected for general recombination losses according to the two-dose-rate method for continuous beams, had a good agreement with the signal to dose linearity from the NACP-02 monitor chamber for general collection efficiencies above 70%. The results also displayed an agreement with the theoretical collection efficiencies according to the Greening theory, except for the liquid ionization chamber containing isooctane operated at 25 V. At lower dose rates, perturbations from ambient electric fields were found in the microLion chamber measurement results. Due to the perturbations, measurement

  4. Roos and NACP-02 ion chamber perturbations and water-air stopping-power ratios for clinical electron beams for energies from 4 to 22 MeV.

    Science.gov (United States)

    Bailey, M; Shipley, D R; Manning, J W

    2015-02-07

    Empirical fits are developed for depth-compensated wall- and cavity-replacement perturbations in the PTW Roos 34001 and IBA / Scanditronix NACP-02 parallel-plate ionisation chambers, for electron beam qualities from 4 to 22 MeV for depths up to approximately 1.1 × R₅₀,D. These are based on calculations using the Monte Carlo radiation transport code EGSnrc and its user codes with a full simulation of the linac treatment head modelled using BEAMnrc. These fits are used with calculated restricted stopping-power ratios between air and water to match measured depth-dose distributions in water from an Elekta Synergy clinical linear accelerator at the UK National Physical Laboratory. Results compare well with those from recent publications and from the IPEM 2003 electron beam radiotherapy Code of Practice.

  5. Dependence with air density of the response of the PTW SourceCheck ionization chamber for low energy brachytherapy sources

    Energy Technology Data Exchange (ETDEWEB)

    Tornero-López, Ana M.; Guirado, Damián; Ruiz-Arrebola, Samuel [Servicio de Radiofísica y Protección Radiológica, Hospital Universitario San Cecilio, E-18012 Granada (Spain); Perez-Calatayud, Jose [Servicio de Radioterapia, Unidad de Radiofísica, Hospital Universitario y Politécnico La Fe, E-46026 Valencia (Spain); Simancas, Fernando; Lallena, Antonio M. [Departamento de Física Atómica, Molecular y Nuclear, Universidad de Granada, E-18071 Granada (Spain); Gazdic-Santic, Maja [Department of Medical Physics and Radiation Safety, Clinical Centre of Sarajevo University, 71000 Sarajevo (Bosnia and Herzegovina)

    2013-12-15

    Purpose: Air-communicating well ionization chambers are commonly used to assess air kerma strength of sources used in brachytherapy. The signal produced is supposed to be proportional to the air density within the chamber and, therefore, a density-independent air kerma strength is obtained when the measurement is corrected to standard atmospheric conditions using the usual temperature and pressure correction factor. Nevertheless, when assessing low energy sources, the ionization chambers may not fulfill that condition and a residual density dependence still remains after correction. In this work, the authors examined the behavior of the PTW 34051 SourceCheck ionization chamber when measuring the air kerma strength of {sup 125}I seeds.Methods: Four different SourceCheck chambers were analyzed. With each one of them, two series of measurements of the air kerma strength for {sup 125}I selectSeed{sup TM} brachytherapy sources were performed inside a pressure chamber and varying the pressure in a range from 747 to 1040 hPa (560 to 780 mm Hg). The temperature and relative humidity were kept basically constant. An analogous experiment was performed by taking measurements at different altitudes above sea level.Results: Contrary to other well-known ionization chambers, like the HDR1000 PLUS, in which the temperature-pressure correction factor overcorrects the measurements, in the SourceCheck ionization chamber they are undercorrected. At a typical atmospheric situation of 933 hPa (700 mm Hg) and 20 °C, this undercorrection turns out to be 1.5%. Corrected measurements show a residual linear dependence on the density and, as a consequence, an additional density dependent correction must be applied. The slope of this residual linear density dependence is different for each SourceCheck chamber investigated. The results obtained by taking measurements at different altitudes are compatible with those obtained with the pressure chamber.Conclusions: Variations of the altitude and

  6. Air density dependence of the response of the PTW SourceCheck 4pi ionization chamber for (125)I brachytherapy seeds.

    Science.gov (United States)

    Torres Del Río, J; Tornero-López, A M; Guirado, D; Pérez-Calatayud, J; Lallena, A M

    2017-06-01

    To analyze the air density dependence of the response of the new SourceCheck 4pi ionization chamber, manufactured by PTW. The air density dependence of three different SourceCheck 4pi chambers was studied by measuring (125)I sources. Measurements were taken by varying the pressure from 746.6 to 986.6hPa in a pressure chamber. Three different HDR 1000 Plus ionization chambers were also analyzed under similar conditions. A linear and a potential-like function of the air density were fitted to experimental data and their achievement in describing them was analyzed. SourceCheck 4pi chamber response showed a residual dependence on the air density once the standard pressure and temperature factor was applied. The chamber response was overestimated when the air density was below that under normal atmospheric conditions. A similar dependence was found for the HDR 1000 Plus chambers analyzed. A linear function of the air density permitted a very good description of this residual dependence, better than with a potential function. No significant variability between the different specimens of the same chamber model studied was found. The effect of overestimation observed in the chamber responses once they are corrected for the standard pressure and temperature may represent a non-negligible ∼4% overestimation in high altitude cities as ours (700m AMSL). This overestimation behaves linearly with the air density in all cases analyzed. Copyright © 2017 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

  7. Characterization of the PTW SourceCheck ionization chamber with the Valencia lodgment for (125)I seed verification.

    Science.gov (United States)

    Tornero-López, Ana M; Torres Del Río, Julia; Ruiz, Carmen; Perez-Calatayud, Jose; Guirado, Damián; Lallena, Antonio M

    2015-12-01

    In brachytherapy using (125)I seed implants, a verification of the air kerma strength of the sources used is required. Typically, between 40 and 100 seeds are implanted. Checking all of them is unaffordable, especially when seeds are disposed in sterile cartridges. Recently, a new procedure allowing the accomplishment of the international recommendations has been proposed for the seedSelectron system of Elekta Brachytherapy. In this procedure, the SourceCheck ionization chamber is used with a special lodgment (Valencia lodgment) that allows to measure up to 10 seeds simultaneously. In this work we analyze this procedure, showing the feasibility of the approximations required for its application, as well as the effect of the additional dependence with the air density that shows the chamber model used. Uncertainty calculations and the verification of the approximation needed to obtain a calibration factor for the Valencia lodgment are carried out. The results of the present work show that the chamber dependence with the air density is the same whether the Valencia lodgment is used or not. On the contrary, the chamber response profile is influenced by the presence of the lodgment. The determination of this profile requires various measurements due to the nonnegligible variability found between different experiments. If it is considered, the uncertainty in the determination of the air-kerma strength increases from 0.5% to 1%. Otherwise, a systematic additional uncertainty of 1% would occur. This could be relevant for the comparison between user and manufacturer measurements that is mandatory in the case studied here.

  8. High spatial resolution dosimetric response maps for radiotherapy ionization chambers measured using kilovoltage synchrotron radiation

    Science.gov (United States)

    Butler, D. J.; Stevenson, A. W.; Wright, T. E.; Harty, P. D.; Lehmann, J.; Livingstone, J.; Crosbie, J. C.

    2015-11-01

    Small circular beams of synchrotron radiation (0.1 mm and 0.4 mm in diameter) were used to irradiate ionization chambers of the types commonly used in radiotherapy. By scanning the chamber through the beam and measuring the ionization current, a spatial map of the dosimetric response of the chamber was recorded. The technique is able to distinguish contributions to the large-field ionization current from the chamber walls, central electrode and chamber stem. Scans were recorded for the NE 2571 Farmer chamber, the PTW 30013, IBA FC65-G Farmer-type chambers, the NE 2611A and IBA CC13 thimble chambers, the PTW 31006 and 31014 pinpoint chambers, the PTW Roos and Advanced Markus plane-parallel chambers, and the PTW 23342 thin-window soft x-ray chamber. In all cases, large contributions to the response arise from areas where the incident beam grazes the cavity surfaces. Quantitative as well as qualitative information about the relative chamber response was extracted from the maps, including the relative contribution of the central electrode. Line scans using monochromatic beams show the effect of the photon energy on the chamber response. For Farmer-type chambers, a simple Monte Carlo model was in good agreement with the measured response.

  9. 基于PTW Seven29TM二维电离室矩阵的调强放疗计划剂量验证%Dosimetric Veriifcation for Intensity-modulated Radiation Therapy Based on PTW Seven29TM Two-dimensional Ion Chamber Array

    Institute of Scientific and Technical Information of China (English)

    汪志; 王成; 唐虹; 洪浩; 李锐; 陈香存; 童铸廷; 王凡

    2016-01-01

    目的:探讨利用PTW Seven29TM二维电离室矩阵验证调强放疗计划的可行性。方法选取70例肿瘤患者(头颈部肿瘤15例,胸部肿瘤30例,腹部肿瘤25例)。在Pinnacle 9.8计划系统中设计相应的调强放疗计划,然后将调强放疗计划移植到验证模体上。在加速器上对放疗计划进行验证并利用PTW Seven29TM测量相应的剂量分布,采用Gamma分析法比较计划系统的理论输出数据和PTW Seven29TM实际测量数据的差异。结果头、胸、腹部肿瘤患者调强放疗计划的Gamma通过率(3 mm,3%)分别为:95.29%±2.46%,96.11%±2.66%和96.03%±1.98%,表明所有患者的调强放疗计划均能够满足临床需要。结论使用PTW Seven29TM二维电离室矩阵验证调强放疗计划简便、可行。%Objective To investigate the feasibility of dosimetric verification for Intensity-modulated Radiation Therapy (IMRT) based on the Seven29TM two-dimensional ion chamber array (2D-array). Methods The IMRT plans of 70 patients (15 head and neck neoplasm patients, 30 thoracicneoplasm patients, 25 abdominalneoplasm patients) were designed with Pinnacle 9.8 and copied to dosimetric phantom. The results of IMRT plans were imported to linear accelerators (Siemens Artiste) and the plans were executed. The delivered dose distribution were measured by the Seven29TM and compared with the planned dose distribution.Results The results of Gamma of patients with head and neck, breast, abdomen were 95.29%±2.46%, 96.11%±2.66% and 96.03%±1.98% with a standard error of 3 mm and 3%. The radiation therapeutic regimens all meet the clinical needs of all patients examined.Conclusion The IMRT plans can be veriifed with PTW Seven29TMin a simple and feasible way.

  10. Absolute dosimetry on a dynamically scanned sample for synchrotron radiotherapy using graphite calorimetry and ionization chambers

    Science.gov (United States)

    Lye, J. E.; Harty, P. D.; Butler, D. J.; Crosbie, J. C.; Livingstone, J.; Poole, C. M.; Ramanathan, G.; Wright, T.; Stevenson, A. W.

    2016-06-01

    The absolute dose delivered to a dynamically scanned sample in the Imaging and Medical Beamline (IMBL) on the Australian Synchrotron was measured with a graphite calorimeter anticipated to be established as a primary standard for synchrotron dosimetry. The calorimetry was compared to measurements using a free-air chamber (FAC), a PTW 31 014 Pinpoint ionization chamber, and a PTW 34 001 Roos ionization chamber. The IMBL beam height is limited to approximately 2 mm. To produce clinically useful beams of a few centimetres the beam must be scanned in the vertical direction. In practice it is the patient/detector that is scanned and the scanning velocity defines the dose that is delivered. The calorimeter, FAC, and Roos chamber measure the dose area product which is then converted to central axis dose with the scanned beam area derived from Monte Carlo (MC) simulations and film measurements. The Pinpoint chamber measures the central axis dose directly and does not require beam area measurements. The calorimeter and FAC measure dose from first principles. The calorimetry requires conversion of the measured absorbed dose to graphite to absorbed dose to water using MC calculations with the EGSnrc code. Air kerma measurements from the free air chamber were converted to absorbed dose to water using the AAPM TG-61 protocol. The two ionization chambers are secondary standards requiring calibration with kilovoltage x-ray tubes. The Roos and Pinpoint chambers were calibrated against the Australian primary standard for air kerma at the Australian Radiation Protection and Nuclear Safety Agency (ARPANSA). Agreement of order 2% or better was obtained between the calorimetry and ionization chambers. The FAC measured a dose 3-5% higher than the calorimetry, within the stated uncertainties.

  11. Getting Started with Roo

    CERN Document Server

    Long, Josh

    2011-01-01

    Spring Roo goes a step beyond the Spring Framework by bringing true Rapid Application Development to Java-just as Grails has done with Groovy. This concise introduction shows you how to build applications with Roo, using the framework's shell as an intelligent and timesaving code-completion tool. It's an ideal RAD tool because Roo does much of the tedious code maintenance. You'll get started by building a simple customer relationship management application, complete with step-by-step instructions and code examples. Learn how to control any part of the application with Roo's opt-in feature, w

  12. Determination of relative ion chamber calibration coefficients from depth-ionization measurements in clinical electron beams

    Science.gov (United States)

    Muir, B. R.; McEwen, M. R.; Rogers, D. W. O.

    2014-10-01

    A method is presented to obtain ion chamber calibration coefficients relative to secondary standard reference chambers in electron beams using depth-ionization measurements. Results are obtained as a function of depth and average electron energy at depth in 4, 8, 12 and 18 MeV electron beams from the NRC Elekta Precise linac. The PTW Roos, Scanditronix NACP-02, PTW Advanced Markus and NE 2571 ion chambers are investigated. The challenges and limitations of the method are discussed. The proposed method produces useful data at shallow depths. At depths past the reference depth, small shifts in positioning or drifts in the incident beam energy affect the results, thereby providing a built-in test of incident electron energy drifts and/or chamber set-up. Polarity corrections for ion chambers as a function of average electron energy at depth agree with literature data. The proposed method produces results consistent with those obtained using the conventional calibration procedure while gaining much more information about the behavior of the ion chamber with similar data acquisition time. Measurement uncertainties in calibration coefficients obtained with this method are estimated to be less than 0.5%. These results open up the possibility of using depth-ionization measurements to yield chamber ratios which may be suitable for primary standards-level dissemination.

  13. PTW modeling in xRage

    Energy Technology Data Exchange (ETDEWEB)

    Long, Christopher Curtis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rauenzahn, Rick M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-05-01

    Preston-Tonks-Wallace Model (PTW), is a viscoplastic material model for very high strain rates (~1011/s) and uses a Voce work hardening model. Strain rates above 109/s uses Wallace’s model of overdriven shocks in metals. PTW is applicable for broad range of strain rates (10-3) -1012).

  14. Lutheri loft / Irene Roos

    Index Scriptorium Estoniae

    Roos, Irene

    2008-01-01

    Tallinnas Lutheri kvartalis läbi kahe korruse paiknevast näidiskorterist. Sisustajad Irene Roos ja Ester Penjam. Paekiviseina kasutati sisustuselemendina, Philipsi valgustid jagasid ruumi eri tsoonideks. 9 värv. ill

  15. Potential errors in relative dose measurements in kilovoltage photon beams due to polarity effects in plane-parallel ionisation chambers.

    Science.gov (United States)

    Dowdell, S; Tyler, M; McNamara, J; Sloan, K; Ceylan, A; Rinks, A

    2016-11-15

    Plane-parallel ionisation chambers are regularly used to conduct relative dosimetry measurements for therapeutic kilovoltage beams during commissioning and routine quality assurance. This paper presents the first quantification of the polarity effect in kilovoltage photon beams for two types of commercially available plane-parallel ionisation chambers used for such measurements. Measurements were performed at various depths along the central axis in a solid water phantom and for different field sizes at 2 cm depth to determine the polarity effect for PTW Advanced Markus and Roos ionisation chambers (PTW-Freiburg, Germany). Data was acquired for kilovoltage beams between 100 kVp (half-value layer (HVL)  =  2.88 mm Al) and 250 kVp (HVL  =  2.12 mm Cu) and field sizes of 3-15 cm diameter for 30 cm focus-source distance (FSD) and 4  ×  4 cm(2)-20  ×  20 cm(2) for 50 cm FSD. Substantial polarity effects, up to 9.6%, were observed for the Advanced Markus chamber compared to a maximum 0.5% for the Roos chamber. The magnitude of the polarity effect was observed to increase with field size and beam energy but was consistent with depth. The polarity effect is directly influenced by chamber design, with potentially large polarity effects for some plane-parallel ionisation chambers. Depending on the specific chamber used, polarity corrections may be required for output factor measurements of kilovoltage photon beams. Failure to account for polarity effects could lead to an incorrect dose being delivered to the patient.

  16. Potential errors in relative dose measurements in kilovoltage photon beams due to polarity effects in plane-parallel ionisation chambers

    Science.gov (United States)

    Dowdell, S.; Tyler, M.; McNamara, J.; Sloan, K.; Ceylan, A.; Rinks, A.

    2016-12-01

    Plane-parallel ionisation chambers are regularly used to conduct relative dosimetry measurements for therapeutic kilovoltage beams during commissioning and routine quality assurance. This paper presents the first quantification of the polarity effect in kilovoltage photon beams for two types of commercially available plane-parallel ionisation chambers used for such measurements. Measurements were performed at various depths along the central axis in a solid water phantom and for different field sizes at 2 cm depth to determine the polarity effect for PTW Advanced Markus and Roos ionisation chambers (PTW-Freiburg, Germany). Data was acquired for kilovoltage beams between 100 kVp (half-value layer (HVL)  =  2.88 mm Al) and 250 kVp (HVL  =  2.12 mm Cu) and field sizes of 3-15 cm diameter for 30 cm focus-source distance (FSD) and 4  ×  4 cm2-20  ×  20 cm2 for 50 cm FSD. Substantial polarity effects, up to 9.6%, were observed for the Advanced Markus chamber compared to a maximum 0.5% for the Roos chamber. The magnitude of the polarity effect was observed to increase with field size and beam energy but was consistent with depth. The polarity effect is directly influenced by chamber design, with potentially large polarity effects for some plane-parallel ionisation chambers. Depending on the specific chamber used, polarity corrections may be required for output factor measurements of kilovoltage photon beams. Failure to account for polarity effects could lead to an incorrect dose being delivered to the patient.

  17. [Theoretical investigation of the saturation correction for ionization chambers irradiated with pulsed beams of arbitrary pulse length].

    Science.gov (United States)

    Karsch, Leonhard; Pawelke, Jörg

    2014-09-01

    In ionization chambers, not all released charge is collected due to the recombination of charge carriers. This effect is taken into account by the saturation correction factor kS. A physical description of the correction factor has been established for pulsed radiation. However, it is only accurate when the pulse length is short compared with the collection time of the ionization chamber. In this paper we develop a description of the saturation correction for radiation pulses of arbitrary length. For this, a system of partial differential equations is solved iteratively. The numerical solutions are verified experimentally for a Roos ionization chamber (PTW TM34001) exposed to a pulsed electron beam. The results of this iterative procedure describe the experimental data well. The calculations are also possible for beam structures which are experimentally hard to get and thereby contribute to a better understanding and correct description of the saturation correction at arbitrary pulse length. Among other things the pulse length dependent distributions of the charge carriers in the ionization chamber is calculated, inclusive of the transition to the conditions prevailing in the case of continuous irradiation. Furthermore is shown that the formula for kS established by Hochhäuser and Balk is applicable even at arbitrary pulse length, if pulse duration dependent effective values are used for the parameters a and p. These effective values have been determined for the Roos chamber at pulse lengths up to 300 μs.

  18. Roos on roos on kärbes / Tõnis Tatar

    Index Scriptorium Estoniae

    Tatar, Tõnis

    2009-01-01

    Urmas Viigi näitus "Kärbes. Roos. Kärbes" Tartu Kunstimuuseumis 31. oktoobrini. Ekspositsiooni inspiratsiooniallikateks on Jorge Luis Borgese looming ja muinasjutuklassika. Näitust saadab kataloog

  19. Roos on roos on kärbes / Tõnis Tatar

    Index Scriptorium Estoniae

    Tatar, Tõnis

    2009-01-01

    Urmas Viigi näitus "Kärbes. Roos. Kärbes" Tartu Kunstimuuseumis 31. oktoobrini. Ekspositsiooni inspiratsiooniallikateks on Jorge Luis Borgese looming ja muinasjutuklassika. Näitust saadab kataloog

  20. Theoretical investigation of the saturation correction for ionization chambers irradiated with pulsed beams of arbitrary pulse length; Theoretische Untersuchung der Saettigungskorrektion von Ionisationskammern in gepulsten Strahlungsfeldern bei beliebiger Pulsdauer

    Energy Technology Data Exchange (ETDEWEB)

    Karsch, Leonhard; Pawelke, Joerg [OncoRay - National Center for Radiation Research in Oncology, Dresden (Germany)

    2014-10-01

    In ionization chambers, not all released charge is collected due to the recombination of charge carriers. This effect is taken into account by the saturation correction factor k{sub S}. A physical description of the correction factor has been established for pulsed radiation. However, it is only accurate when the pulse length is short compared with the collection time of the ionization chamber. In this paper we develop a description of the saturation correction for radiation pulses of arbitrary length. For this, a system of partial differential equations is solved iteratively. The numerical solutions are verified experimentally for a Roos ionization chamber (PTW TM34001) exposed to a pulsed electron beam. The results of this iterative procedure describe the experimental data well. The calculations are also possible for beam structures which are experimentally hard to get and thereby contribute to a better understanding and correct description of the saturation correction at arbitrary pulse length. Among other things the pulse length dependent distributions of the charge carriers in the ionization chamber is calculated, inclusive of the transition to the conditions prevailing in the case of continuous irradiation. Furthermore is shown that the formula for k{sub S} established by Hochhaeuser and Balk is applicable even at arbitrary pulse length, if pulse duration dependent effective values are used for the parameters a and p. These effective values have been determined for the Roos chamber at pulse lengths up to 300 μs. (orig.)

  1. Performance parameters of a liquid filled ionization chamber array.

    Science.gov (United States)

    Poppe, B; Stelljes, T S; Looe, H K; Chofor, N; Harder, D; Willborn, K

    2013-08-01

    In this work, the properties of the two-dimensional liquid filled ionization chamber array Octavius 1000SRS (PTW-Freiburg, Germany) for use in clinical photon-beam dosimetry are investigated. Measurements were carried out at an Elekta Synergy and Siemens Primus accelerator. For measurements of stability, linearity, and saturation effects of the 1000SRS array a Semiflex 31013 ionization chamber (PTW-Freiburg, Germany) was used as a reference. The effective point of measurement was determined by TPR measurements of the array in comparison with a Roos chamber (type 31004, PTW-Freiburg, Germany). The response of the array with varying field size and depth of measurement was evaluated using a Semiflex 31010 ionization chamber as a reference. Output factor measurements were carried out with a Semiflex 31010 ionization chamber, a diode (type 60012, PTW-Freiburg, Germany), and the detector array under investigation. The dose response function for a single detector of the array was determined by measuring 1 cm wide slit-beam dose profiles and comparing them against diode-measured profiles. Theoretical aspects of the low pass properties and of the sampling frequency of the detector array were evaluated. Dose profiles measured with the array and the diode detector were compared, and an intensity modulated radiation therapy (IMRT) field was verified using the Gamma-Index method and the visualization of line dose profiles. The array showed a short and long term stability better than 0.1% and 0.2%, respectively. Fluctuations in linearity were found to be within ±0.2% for the vendor specified dose range. Saturation effects were found to be similar to those reported in other studies for liquid-filled ionization chambers. The detector's relative response varied with field size and depth of measurement, showing a small energy dependence accounting for maximum signal deviations of ±2.6% from the reference condition for the setup used. The σ-values of the Gaussian dose response

  2. Performance parameters of a liquid filled ionization chamber array

    Energy Technology Data Exchange (ETDEWEB)

    Poppe, B.; Stelljes, T. S.; Looe, H. K.; Chofor, N. [Clinic for Radiation Therapy, Pius-Hospital, Oldenburg 26121, Germany and WG Medical Radiation Physics, Carl von Ossietzky University, Oldenburg 26121 (Germany); Harder, D. [Prof. em., Medical Physics and Biophysics, Georg August University, Göttingen 37073 (Germany); Willborn, K. [Clinic for Radiation Therapy, Pius-Hospital, Oldenburg 26121 (Germany)

    2013-08-15

    Purpose: In this work, the properties of the two-dimensional liquid filled ionization chamber array Octavius 1000SRS (PTW-Freiburg, Germany) for use in clinical photon-beam dosimetry are investigated.Methods: Measurements were carried out at an Elekta Synergy and Siemens Primus accelerator. For measurements of stability, linearity, and saturation effects of the 1000SRS array a Semiflex 31013 ionization chamber (PTW-Freiburg, Germany) was used as a reference. The effective point of measurement was determined by TPR measurements of the array in comparison with a Roos chamber (type 31004, PTW-Freiburg, Germany). The response of the array with varying field size and depth of measurement was evaluated using a Semiflex 31010 ionization chamber as a reference. Output factor measurements were carried out with a Semiflex 31010 ionization chamber, a diode (type 60012, PTW-Freiburg, Germany), and the detector array under investigation. The dose response function for a single detector of the array was determined by measuring 1 cm wide slit-beam dose profiles and comparing them against diode-measured profiles. Theoretical aspects of the low pass properties and of the sampling frequency of the detector array were evaluated. Dose profiles measured with the array and the diode detector were compared, and an intensity modulated radiation therapy (IMRT) field was verified using the Gamma-Index method and the visualization of line dose profiles.Results: The array showed a short and long term stability better than 0.1% and 0.2%, respectively. Fluctuations in linearity were found to be within ±0.2% for the vendor specified dose range. Saturation effects were found to be similar to those reported in other studies for liquid-filled ionization chambers. The detector's relative response varied with field size and depth of measurement, showing a small energy dependence accounting for maximum signal deviations of ±2.6% from the reference condition for the setup used. The σ-values of

  3. Dosimetric characteristics of the novel 2D ionization chamber array OCTAVIUS Detector 1500

    Energy Technology Data Exchange (ETDEWEB)

    Stelljes, T. S., E-mail: tenzin.s.stelljes@uni-oldenburg.de; Looe, H. K.; Chofor, N.; Poppe, B. [Clinic for Radiation Therapy, Pius-Hospital, Oldenburg 26121, Germany and WG Medical Radiation Physics, Carl von Ossietzky University, Oldenburg 26129 (Germany); Harmeyer, A.; Reuter, J. [WG Medical Radiation Physics, Carl von Ossietzky University, Oldenburg 26129 (Germany); Harder, D. [Prof. em., Medical Physics and Biophysics, Georg August University, Göttingen 37073 (Germany)

    2015-04-15

    Purpose: The dosimetric properties of the OCTAVIUS Detector 1500 (OD1500) ionization chamber array (PTW-Freiburg, Freiburg, Germany) have been investigated. A comparative study was carried out with the OCTAVIUS Detector 729 and OCTAVIUS Detector 1000 SRS arrays. Methods: The OD1500 array is an air vented ionization chamber array with 1405 detectors in a 27 × 27 cm{sup 2} measurement area arranged in a checkerboard pattern with a chamber-to-chamber distance of 10 mm in each row. A sampling step width of 5 mm can be achieved by merging two measurements shifted by 5 mm, thus fulfilling the Nyquist theorem for intensity modulated dose distributions. The stability, linearity, and dose per pulse dependence were investigated using a Semiflex 31013 chamber (PTW-Freiburg, Freiburg, Germany) as a reference detector. The effective depth of measurement was determined by measuring TPR curves with the array and a Roos chamber type 31004 (PTW-Freiburg, Freiburg, Germany). Comparative output factor measurements were performed with the array, the Semiflex 31010 ionization chamber and the Diode 60012 (both PTW-Freiburg, Freiburg, Germany). The energy dependence of the OD1500 was measured by comparing the array’s readings to those of a Semiflex 31010 ionization chamber for varying mean photon energies at the depth of measurement, applying to the Semiflex chamber readings the correction factor k{sub NR} for nonreference conditions. The Gaussian lateral dose response function of a single array detector was determined by searching the convolution kernel suitable to convert the slit beam profiles measured with a Diode 60012 into those measured with the array’s central chamber. An intensity modulated dose distribution measured with the array was verified by comparing a OD1500 measurement to TPS calculations and film measurements. Results: The stability and interchamber sensitivity variation of the OD1500 array were within ±0.2% and ±0.58%, respectively. Dose linearity was within 1

  4. Dosimetric characteristics of the novel 2D ionization chamber array OCTAVIUS Detector 1500.

    Science.gov (United States)

    Stelljes, T S; Harmeyer, A; Reuter, J; Looe, H K; Chofor, N; Harder, D; Poppe, B

    2015-04-01

    The dosimetric properties of the OCTAVIUS Detector 1500 (OD1500) ionization chamber array (PTW-Freiburg, Freiburg, Germany) have been investigated. A comparative study was carried out with the OCTAVIUS Detector 729 and OCTAVIUS Detector 1000 SRS arrays. The OD1500 array is an air vented ionization chamber array with 1405 detectors in a 27 × 27 cm(2) measurement area arranged in a checkerboard pattern with a chamber-to-chamber distance of 10 mm in each row. A sampling step width of 5 mm can be achieved by merging two measurements shifted by 5 mm, thus fulfilling the Nyquist theorem for intensity modulated dose distributions. The stability, linearity, and dose per pulse dependence were investigated using a Semiflex 31013 chamber (PTW-Freiburg, Freiburg, Germany) as a reference detector. The effective depth of measurement was determined by measuring TPR curves with the array and a Roos chamber type 31004 (PTW-Freiburg, Freiburg, Germany). Comparative output factor measurements were performed with the array, the Semiflex 31010 ionization chamber and the Diode 60012 (both PTW-Freiburg, Freiburg, Germany). The energy dependence of the OD1500 was measured by comparing the array's readings to those of a Semiflex 31010 ionization chamber for varying mean photon energies at the depth of measurement, applying to the Semiflex chamber readings the correction factor kNR for nonreference conditions. The Gaussian lateral dose response function of a single array detector was determined by searching the convolution kernel suitable to convert the slit beam profiles measured with a Diode 60012 into those measured with the array's central chamber. An intensity modulated dose distribution measured with the array was verified by comparing a OD1500 measurement to TPS calculations and film measurements. The stability and interchamber sensitivity variation of the OD1500 array were within ±0.2% and ±0.58%, respectively. Dose linearity was within 1% over the range from 5 to 1000 MU. The

  5. Innovative Plasma Disinfection Technique with the Reduced-pH Method and the Plasma-Treated Water (PTW) -Safety and Powerful Disinfection with Cryopreserved PTW-

    Science.gov (United States)

    Kitano, Katsuhisa; Ikawa, Satoshi; Nakashima, Yoichi; Tani, Atsushi; Yokoyama, Takashi; Ohshima, Tomoko

    2015-09-01

    Among the applications of the plasma disinfection to human body, plasma sterilization in liquid is crucial. We found that the plasma-treated water (PTW) has strong bactericidal activity under low pH condition and the half-lives of its activity depend on temperature. Lower temperature brings longer half-life and the bactericidal activity of PTW can be kept by cryopreservation. These physicochemical properties were in accordance with Arrhenius equation both in liquid and solid states. From the experimental results of ESR (Electron Spin Resonance) measurement of O2-in liquid against PTW with spin trapping method, half-lives of PTW were also in accordance with Arrhenius equation. It suggests that high concentration PTW as integrated value can be achieved by cooling of plasma apparatus. Pure PTW has disinfection power of 22 log reduction (B. subtilis). This corresponds to 65% H2O2, 14% hypochlorous acid and 0.33% peracetic acid, which are deadly poison for human. On the other hand, PTW is deactivated soon at body temperature. This indicates that toxicity to human body seems to be low. PTW, which is a sort of indirect plasma exposure, with pH and temperature controls could be applied for safety and powerful disinfection. MEXT (15H03583, 23340176, 25108505). NCCE (23-A-15).

  6. Effect of Filler Content on the Performance of Epoxy/PTW Composites

    Directory of Open Access Journals (Sweden)

    Mudradi Sudheer

    2014-01-01

    Full Text Available This paper presents the mechanical and tribological characteristics of potassium titanate whisker (PTW reinforced epoxy composites. The effect of various test variables and material parameters on the friction and wear behavior of epoxy/PTW composites has been studied systematically. Tribological tests were conducted on a pin-on-disc apparatus under dry sliding conditions. Addition of PTW was found to improve the wear resistance of the composites and 15 wt% PTW filled epoxy exhibited lowest specific wear rate and highest friction coefficient compared to other test samples. PTW additions showed beneficiary effect on density, hardness, and stiffness properties of composites; however, strength properties and ductility were found to decrease with the increasing content of PTW. Scanning electron microscope (SEM images of tensile fractured surfaces and worn-out surfaces of selected samples revealed different fracture mechanisms.

  7. Evolutionary dynamics of the LTR retrotransposons roo and rooA inferred from twelve complete Drosophila genomes

    Directory of Open Access Journals (Sweden)

    de la Chaux Nicole

    2009-08-01

    Full Text Available Abstract Background Roo is the most abundant retrotransposon in the fruit fly Drosophila melanogaster. Its evolutionary origins and dynamics are thus of special interest for understanding the evolutionary history of Drosophila genome organization. We here study the phylogenetic distribution and evolution of roo, and its highly diverged relative rooA in 12 completely sequenced genomes of the genus Drosophila. Results We identify a total of 164 roo copies, 57 of which were previously unidentified copies that occur in 9 of the 12 genomes. Additionally we find 66 rooA copies in four genomes and remnants of this element in two additional genomes. We further increased the number of elements by searching for individual roo/rooA sequence domains. Most of our roo and rooA elements have been recently inserted. Most elements within a genome are highly similar. A comparison of the phylogenetic tree of our roo and rooA elements shows that the split between roo and rooA took place early in Drosophila evolution. Furthermore there is one incongruency between the species tree and the phylogenetic tree of the roo element. This incongruency regards the placement of elements from D. mojavensis, which are more closely related to D. melanogaster than elements from D. willistoni. Conclusion Within genomes, the evolutionary dynamics of roo and rooA range from recent transpositional activity to slow decay and extinction. Among genomes, the balance of phylogenetic evidence, sequence divergence distribution, and the occurrence of solo-LTR elements suggests an origin of roo/rooA within the Drosophila clade. We discuss the possibility of a horizontal gene transfer of roo within this clade.

  8. Oxygen reduction on carbon supported Pt-W electrocatalysts

    Energy Technology Data Exchange (ETDEWEB)

    Meza, D.; Morales, U.; Salgado, L. [Departamento de Quimica, Area de Electroquimica, Universidad Autonoma Metropolitana, Unidad Iztapalapa, San Rafael Atlixco 186, Col. Vicentina, 09340 Distrito Federal (Mexico); Roquero, P. [Unidad de Investigacion en Catalisis, Facultad de Quimica, UNAM, Ciudad Universitaria, 04510 Distrito Federal (Mexico)

    2010-11-15

    The catalytic activity of Pt-W electrocatalysts towards oxygen reduction reaction (ORR) was studied. Pt-W/C materials were prepared by thermolysis of tungsten and platinum carbonyl complexes in 1-2 dichloro-benzene during 48 h. The precursors were mixed to obtain relations of Pt:W: 50:50 and 80:20%w, respectively. The Pt carbonyl complex was previously synthesized by bubbling CO in a chloroplatinic acid solution. The synthesized materials were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), cyclic voltammetry (CV) and a rotating disk electrode (RDE). The results show that both materials (Pt{sub 50}W{sub 50}/C and Pt{sub 80}W{sub 20}/C) have a crystalline phase associated with metallic platinum and an amorphous phase related with tungsten and carbon. The particle size of the electrocatalysts depends on the relationship between platinum and tungsten. Finally, both materials exhibit catalytic activity for oxygen reduction. (author)

  9. Dosimetric characteristics of four PTW microDiamond detectors in high-energy proton beams

    Science.gov (United States)

    Marsolat, F.; De Marzi, L.; Patriarca, A.; Nauraye, C.; Moignier, C.; Pomorski, M.; Moignau, F.; Heinrich, S.; Tromson, D.; Mazal, A.

    2016-09-01

    Small diamond detectors are useful for the dosimetry of high-energy proton beams. However, linear energy transfer (LET) dependence has been observed in the literature with such solid state detectors. A novel synthetic diamond detector has recently become commercially available from the manufacturer PTW-Freiburg (PTW microDiamond type 60019). This study was designed to thoroughly characterize four microDiamond detectors in clinical proton beams, in order to investigate their response and their reproducibility in high LET regions. Very good dosimetric characteristics were observed for two of them, with good stability of their response (deviation less than 0.4% after a pre-irradiation dose of approximately 12 Gy), good repeatability (coefficient of variation of 0.06%) and a sensitivity of approximately 0.85 nC Gy-1. A negligible dose rate dependence was also observed for these two microDiamonds with a deviation of the sensitivity less than 0.7% with respect to the one measured at the reference dose rate of 2.17 Gy min-1, in the investigated dose rate range from 1.01 Gy min-1 to 5.52 Gy min-1. Lateral dose profile measurements showed the high spatial resolution of the microDiamond oriented with its stem perpendicular to the beam axis and with its small sensitive thickness of about 1 μm in the scanning profile direction. Finally, no significant LET dependence was found with these two diamond dosimeters in comparison to a reference ionization chamber (model IBA PPC05). These good results were in accordance to the literature. However, this study showed also a non reproducibility between the devices in terms of stability, sensitivity and LET dependence, since the two other microDiamonds characterized in this work showed different dosimetric characteristics making them not suitable for proton beam dosimetry with a maximum difference of the peak-to-plateau ratio of 6.7% relative to the reference ionization chamber in a clinical 138 MeV proton beam.

  10. Genetrade Eesti büroo = Genetrade Estonia office

    Index Scriptorium Estoniae

    2012-01-01

    Tallinnas Väike-Paala 1 asuva büroo sisekujundusest. Autor Jan Skolimowski (KAMP Arhitektid), loetletud tema tehtud töid. Büroo viimistlus ja sisustus valmistati Genetrade'i tarnitud materjalidest

  11. Genetrade Eesti büroo = Genetrade Estonia office

    Index Scriptorium Estoniae

    2012-01-01

    Tallinnas Väike-Paala 1 asuva büroo sisekujundusest. Autor Jan Skolimowski (KAMP Arhitektid), loetletud tema tehtud töid. Büroo viimistlus ja sisustus valmistati Genetrade'i tarnitud materjalidest

  12. Enn Laansoo Arhitektuuribüroo AS

    Index Scriptorium Estoniae

    1992-01-01

    Artiklis on välja toodud büroo projektid ajavahemikust 1989-1991. Nendeks on: Pärnu hotell (1990), Haapsalu hotell (1990), firma "Zivert" büroohoone Tallinnas (1990), "Lada Service" firmakauplus Tartus (1989), kvartal Tallinnas Paldiski mnt. 30-40 (1990)

  13. Kodumaine ja nooruslik / Piret Veigel, Irene Roos

    Index Scriptorium Estoniae

    Veigel, Piret, 1961-

    2003-01-01

    Arhitekt Vahur Sova projekteeritud ökomaja eeskujul kujundatud elutuba. Värvivalik on inspireeritud looduse sügistalvistest toonidest ja naturaalsetest materjalidest. Stilistid Piret Veigel ja Irene Roos. Vineerkapi on kujundanud Tarmo Luisk, laua Jan J. Graps, sirmi Igor Volkov

  14. Eesti põrsad Hiinas / Janno Roos

    Index Scriptorium Estoniae

    Roos, Janno, 1976-

    2009-01-01

    Shanghai EXPO Eesti paviljoni konkursi võidutööst "Savecity.org". Võidutöö autorid Illimar Truverk AET-Arhitektid, Priit Hamer AET-Arhitektid, Janno Roos Ruumilabor, Andres Labi Ruumilabor, Ionel Lehari Identity, Kristian Paljasma Identity, Meelis Opmann Identity ja Maret Põldre Identity

  15. Advokaadibüroo toetab tudengeid

    Index Scriptorium Estoniae

    2005-01-01

    Tartu Ülikooli õigusteaduskonna dekaan prof Kalle Merusk ja advokaadibüroo Luiga Mody Hääl Borenius esindajad kirjutasid alla statuudile "Teldersi sihtkapital", mille vahenditest hakatakse rahastama üliõpilaste osavõttu Teldersi-nimelisest rahvusvahelise harjutuskohtu võistlusest

  16. Eesti põrsad Hiinas / Janno Roos

    Index Scriptorium Estoniae

    Roos, Janno, 1976-

    2009-01-01

    Shanghai EXPO Eesti paviljoni konkursi võidutööst "Savecity.org". Võidutöö autorid Illimar Truverk AET-Arhitektid, Priit Hamer AET-Arhitektid, Janno Roos Ruumilabor, Andres Labi Ruumilabor, Ionel Lehari Identity, Kristian Paljasma Identity, Meelis Opmann Identity ja Maret Põldre Identity

  17. Determinations of the correction factors for small fields in cylindrical ionization chambers based on measurement and numerical calculation

    Science.gov (United States)

    Park, Kwangwoo; Choi, Wonhoon; Park, Sungho; Choi, Jin Hwa; Park, Suk Won; Bak, Jino

    2015-07-01

    We investigated the volume averaging effect for air-filled cylindrical ionization chambers to determine the correction factors in a small photon field for a given chamber. We measured output factors with several cylindrical ionization chambers, and by using a mathematical method similar to deconvolution, we modeled the non-constant and inhomogeneous exposure function in the cavity of the chamber. The parameters in the exposure function and the correction factors were determined by solving a system of equations that we had developed by using the measured data and the geometry of the given chamber. The correction factors (CFs) were very similar to those obtained from Monte Carlo (MC) simulations. For example, the CFs in this study were found to be 1.116 for PTW31010 and 1.0225 for PTW31016 while the CFs obtained from MC simulations were reported as being approximately between 1.17 and 1.20 for PTW31010 and between 1.02 and 1.06 for PTW31016 in a 6-MV photon beam of 1 × 1 cm2. Furthermore, the method of deconvolution combined with the MC result for the chamber's response function showed a similar CF for PTW 30013, which was reported as 2.29 and 1.54 for a 1 × 1 cm2 and a 1.5 × 1.5 cm2 field size, respectively. The CFs from our method were similar, 2.42 and 1.54. In addition, we report CFs for PTW30013, PTW31010, PTW31016, IBA FC23-C, and IBA CC13. As a consequence, we suggest the use of our method to measure the correct output factor by using the fact that an inhomogeneous exposure causes a volume averaging effect in the cavity of air-filled cylindrical ionization chamber. The result obtained by using our method is very similar to that obtained from MC simulations. The method we developed can easily be applied in clinics.

  18. Comparative analysis for dose verification of volumetric modulated arc therapy by Varian EPID and PTW Detector 729%Varian EPID和PTW Detector 729在容积旋转调强剂量验证中的比较分析

    Institute of Scientific and Technical Information of China (English)

    孟慧鹏; 孙小喆; 王昊; 孙劲松; 郑爱青; 梁克明

    2015-01-01

    The data of dose verification between Varian EPID and PTW Detector 729 is compared to discuss whether the statistics difference of gamma passing rates between the two methods exists. The RapidArc plans for different body sites of 30 patients undergoing radiation treatment with RapidArc technique were used for the generation of the two verification plans, with one for using the electronic portal imaging device (EPID) of Varian RapidArc systems (Varian medical systems), and the other for using the chamber array detector from PTW(PTW Detector 729). Seven comparative experiments were performed for each pair of the plans, which were measurements inside the target, inside the effective detection area, and the target with expansions of 5 mm,10 mm, 20 mm, 30 mm, and 50 mm, respectively. The gamma passing rate of 3%/3 mm andF-test were used in the quantitative analysis. No statistical difference between the two methods was found for the measurement of the area of target with 30 mm expansion (F=0.395,p>0.05), while statistical difference existed (p0.05),其余6组结果均有统计学差异(p<0.05).两种剂量验证方式各有利弊,对其结论进行比较分析可更全面保障调强放疗计划验证的准确性.

  19. Characterization of a extrapolation chamber in standard X-ray beam, radiodiagnosis level; Caracterizacao de uma camara de extrapolacao em feixes padroes de raios X, nivel radiodiagnostico

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Eric A.B. da; Caldas, Linda V.E., E-mail: ebrito@usp.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2011-10-26

    The extrapolation chamber is a ionization chamber used for detection low energy radiation and can be used as an standard instrument for beta radiation beams. This type of ionization chamber have as main characteristic the variation of sensible volume. This paper performs a study of characterization of a PTW commercial extrapolation chamber, in the energy interval of the qualities of conventional radiodiagnostic

  20. roo Ignite = Ignite office / Priit Põldme, Reet Sepp

    Index Scriptorium Estoniae

    Põldme, Priit, 1971-

    2013-01-01

    roo Ignite (Tatari 25, Tallinn) sisekujundusest. Sisearhitektid Priit Põldme ja Reet Sepp (SAB Joonprojekt). Arhitektid Heiki Taras ja Ahti Luhaäär (Arhitektibüroo Pilter ja Taras). Sisearhitekti ja ESLi aastapreemiate žürii esimehe Kaido Kivi arvamus

  1. Viimsi Keevituse büroo = Offices of Viimsi Keevitus

    Index Scriptorium Estoniae

    2010-01-01

    Viimsis Kaluri tee 13 asuva Viimsi Keevituse büroo sisekujundusest. Autorid: arhitektid Kristi Põldme, Madis Eek, Kristel Jaanus (AB Eek & Mutso), valik nende töödest. Büroo sissepääsu kõrval oleva lõvi autor on skulptor Kalle Pruuden. Klaasseinte 3D graafika: Reio Avaste

  2. roo Ignite = Ignite office / Priit Põldme, Reet Sepp

    Index Scriptorium Estoniae

    Põldme, Priit, 1971-

    2013-01-01

    roo Ignite (Tatari 25, Tallinn) sisekujundusest. Sisearhitektid Priit Põldme ja Reet Sepp (SAB Joonprojekt). Arhitektid Heiki Taras ja Ahti Luhaäär (Arhitektibüroo Pilter ja Taras). Sisearhitekti ja ESLi aastapreemiate žürii esimehe Kaido Kivi arvamus

  3. Analytic EoS and PTW strength model recommendation for Starck Ta

    Energy Technology Data Exchange (ETDEWEB)

    Sjue, Sky K. [Los Alamos National Laboratory; Prime, Michael Bruce [Los Alamos National Laboratory

    2016-09-01

    The purpose of this document is to provide an analytic EoS and PTW strength model for Starck Ta that can be consistently used between different platforms and simulations at three labs. This should provide a consistent basis for comparison of the results of calculations, but not the best implementation for matching a wide variety of experimental data. Another version using SESAME tables should follow, which will provide a better physical representation over a broader range of conditions. The data sets available at the time only include one Hopkinson bar at a strain rate of 1800/s; a broader range of high-rate calibration data would be preferred. The resulting fit gives the PTW parameter p = 0. To avoid numerical issues, p = 0:001 has been used in FLAG. The PTW parameters that apply above the maximum strain rate in the data use the values from the original publication.

  4. Steni muinasjutuvõistluse võitjad selgunud / Ants Roos, Ann Roos

    Index Scriptorium Estoniae

    Roos, Ants

    2008-01-01

    Steni XVI muinasjutuvõistluse žüriisse kuulusid: Ann Roos, Ants Roos, Leelo Tungal, Krista Kumberg, Leida Olszak, Ülle Väljataga. Tulemused: I koht Siim Niinelaid, II koht Julius Air Kull, III koht Mihkel Rammu. Žürii eriauhinnad: Anna Kristin Peterson, Elis Ruus, Rain Hallikas, Mariliis Peterson, Marjaliisa Palu, Karl Kirsimäe, Margaret Pulk. Ergutusauhinnad: Karmel Klaus, Martti Kaljuste, Kristina Korell, Mirjam Võsaste, Mihkel Põder, Iirys Kalde, Miriam Jamul, Mari-Ann Mägi, Ketlin Saar, Liisbeth Kirss. Muud eriauhinnad said: Allan Läll, Berle Mees, Anett Kuuse, Karl Erik Kübarsepp, Grete Tamm, Siim Niinelaid, Kaisa Marie Sipelgas, Ellen Anett Põldmaa, Evelin Laul, Karl Laas, Karl Stamm, Kerli Retter

  5. Steni muinasjutuvõistluse võitjad selgunud / Ants Roos, Ann Roos

    Index Scriptorium Estoniae

    Roos, Ants

    2008-01-01

    Steni XVI muinasjutuvõistluse žüriisse kuulusid: Ann Roos, Ants Roos, Leelo Tungal, Krista Kumberg, Leida Olszak, Ülle Väljataga. Tulemused: I koht Siim Niinelaid, II koht Julius Air Kull, III koht Mihkel Rammu. Žürii eriauhinnad: Anna Kristin Peterson, Elis Ruus, Rain Hallikas, Mariliis Peterson, Marjaliisa Palu, Karl Kirsimäe, Margaret Pulk. Ergutusauhinnad: Karmel Klaus, Martti Kaljuste, Kristina Korell, Mirjam Võsaste, Mihkel Põder, Iirys Kalde, Miriam Jamul, Mari-Ann Mägi, Ketlin Saar, Liisbeth Kirss. Muud eriauhinnad said: Allan Läll, Berle Mees, Anett Kuuse, Karl Erik Kübarsepp, Grete Tamm, Siim Niinelaid, Kaisa Marie Sipelgas, Ellen Anett Põldmaa, Evelin Laul, Karl Laas, Karl Stamm, Kerli Retter

  6. Starck Ta PTW strength model recommendation for use with SESAME 93524 EoS

    Energy Technology Data Exchange (ETDEWEB)

    Sjue, Sky K. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Prime, Michael Bruce [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-02-27

    The purpose of this document is to provide a calibration of the Preston-Tonks- Wallace (PTW) strength model for use with the new SESAME equation of state (EoS) 93524. The calibration data included in this t spans temperatures from 198 K to 673 K and strain rates from 0.001/s to 3200/s.

  7. HistFactory: A tool for creating statistical models for use with RooFit and RooStats

    CERN Document Server

    Cranmer, Kyle; Moneta, Lorenzo; Shibata, Akira; Verkerke, Wouter

    2012-01-01

    The HistFactory is a tool to build parametrized probability density functions (pdfs) in the RooFit/RooStats framework based based on simple ROOT histograms organized in an XML file. The pdf has a restricted form, but it is sufficiently flexible to describe many analyses based on template histograms. The tool takes a modular approach to build complex pdfs from more primative conceptual building blocks. The resulting PDF is stored in a RooWorkspace which can be saved to and read from a ROOT file. This document describes the defaults and interface in HistFactory 5.32.

  8. "Vettpidavad allikad" = "Watertight sources" / Janno Roos, Andres Labi

    Index Scriptorium Estoniae

    Roos, Janno, 1976-

    2013-01-01

    Eesti Ajaloomuuseumis avatud näituse kujundasid Janno Roos ja Andres Labi (Ruumilabor). Kuraator Krista Sarv. Graafiline disain: Identity. Eksponeeritud allveeuuringute käigus leitu. Arhitektuuriajaloolase Leele Välja arvamus

  9. Eesti Energia esindused = Eesti Energia branches / Andres Labi, Janno Roos

    Index Scriptorium Estoniae

    Labi, Andres, 1977-

    2013-01-01

    Eesti Energia klienditeeninduse kontorite sisekujundusest. Autorid: Janno Roos, Andres Labi ja Liisa Põime (Ruumilabor). Visuaalne identiteet: Tank.Teenuste disain: Urmas Pastarus. ESLi aastapreemiate žürii esimehe Kaido Kivi ning žürii liikme Raivo Puusepa arvamused

  10. "Vettpidavad allikad" = "Watertight sources" / Janno Roos, Andres Labi

    Index Scriptorium Estoniae

    Roos, Janno, 1976-

    2013-01-01

    Eesti Ajaloomuuseumis avatud näituse kujundasid Janno Roos ja Andres Labi (Ruumilabor). Kuraator Krista Sarv. Graafiline disain: Identity. Eksponeeritud allveeuuringute käigus leitu. Arhitektuuriajaloolase Leele Välja arvamus

  11. Eesti Energia esindused = Eesti Energia branches / Andres Labi, Janno Roos

    Index Scriptorium Estoniae

    Labi, Andres, 1977-

    2013-01-01

    Eesti Energia klienditeeninduse kontorite sisekujundusest. Autorid: Janno Roos, Andres Labi ja Liisa Põime (Ruumilabor). Visuaalne identiteet: Tank.Teenuste disain: Urmas Pastarus. ESLi aastapreemiate žürii esimehe Kaido Kivi ning žürii liikme Raivo Puusepa arvamused

  12. Evaluation of PTW Seven29 for tomotherapy patient-specific quality assurance and comparison with ScandiDos Delta4

    Science.gov (United States)

    Myers, Pamela; Stathakis, Sotirios; Gutiérrez, Alonso N.; Esquivel, Carlos; Mavroidis, Panayiotis; Papanikolaou, Niko

    2012-01-01

    For routine quality assurance of helical tomotherapy plans, an alternative method, as opposed to the TomoTherapy suggested cylindrical solid water phantom with film and ionization chamber, is proposed using the PTW Seven29 2D-ARRAY inserted in a dedicated octagonal phantom, called Octavius. First, the sensitivity of the array to pitch was studied by varying the pitch during planning to 0.287, 0.433, 1.0, and 2.0. For each pitch selected, the dependence on field size was investigated by generating plans with field widths (FWs) of 1.06 cm, 2.49 cm, and 5.02 cm, for a total of 12 plans. Secondly, a total of 15 patient QA plans were delivered using helical tomotherapy with the Delta4 and Seven29/Octavius for comparison. Using the clinical gamma criteria, 3% and 3 mm, all FW and pitch plans had a passing percentage of >90%. For patient QA plans, the average gamma pass percentage was 97.0% (94.4–99.8%) for the Delta4 and 97.6% (92.5-100.0%) for the Seven29/Octavius. Both the Seven29/Octavius and Delta4 performed to a high standard of measurement accuracy and had a 90% or greater gamma percent for all plans and were considered clinically acceptable. PMID:22557796

  13. Evaluation of PTW Seven29 for tomotherapy patient-specific quality assurance and comparison with ScandiDos Delta(4).

    Science.gov (United States)

    Myers, Pamela; Stathakis, Sotirios; Gutiérrez, Alonso N; Esquivel, Carlos; Mavroidis, Panayiotis; Papanikolaou, Niko

    2012-04-01

    For routine quality assurance of helical tomotherapy plans, an alternative method, as opposed to the TomoTherapy suggested cylindrical solid water phantom with film and ionization chamber, is proposed using the PTW Seven29 2D-ARRAY inserted in a dedicated octagonal phantom, called Octavius. First, the sensitivity of the array to pitch was studied by varying the pitch during planning to 0.287, 0.433, 1.0, and 2.0. For each pitch selected, the dependence on field size was investigated by generating plans with field widths (FWs) of 1.06 cm, 2.49 cm, and 5.02 cm, for a total of 12 plans. Secondly, a total of 15 patient QA plans were delivered using helical tomotherapy with the Delta(4) and Seven29/Octavius for comparison. Using the clinical gamma criteria, 3% and 3 mm, all FW and pitch plans had a passing percentage of >90%. For patient QA plans, the average gamma pass percentage was 97.0% (94.4-99.8%) for the Delta(4) and 97.6% (92.5-100.0%) for the Seven29/Octavius. Both the Seven29/Octavius and Delta(4) performed to a high standard of measurement accuracy and had a 90% or greater gamma percent for all plans and were considered clinically acceptable.

  14. Evaluation of an autonomous braking system in real-world PTW crashes.

    Science.gov (United States)

    Savino, Giovanni; Pierini, Marco; Rizzi, Matteo; Frampton, Richard

    2013-01-01

    Powered 2-wheelers (PTWs) are becoming increasingly popular in Europe. They have the ability to get around traffic queues, thus lowering fuel consumption and increasing mobility. The risk of rider injury in a traffic crash is however much higher than that associated with car users. The European project, Powered Two Wheeler Integrated Safety (PISa), identified an autonomous braking system (AB) as a priority to reduce the injury consequences of a PTW crash. The aim of this study was to assess the potential effectiveness of the AB system developed in PISa, taking into account the specific system characteristics that emerged during the design, development and testing phases. Fifty-eight PTW cases representing European crash configurations were examined, in which 43 percent of riders sustained a Maximum Abbreviated Injury Scale (MAIS) 2+ injury. Two of the most common crash types were a PTW impacting a stationary object (car following scenario) 16% and an object pulling across the PTW path (crossing scenario) 54%. An expert team analysed the in-depth material of the sample crashes and determined a posteriori to what extent the AB would have affected the crash. For those cases where the AB was evaluated as applicable, a further quantitative evaluation of the benefits was conducted by considering a set of different possible rider reactions in addition to that exhibited in the actual crash. In 67 percent of cases, the application of AB could have mitigated the crash outcome. Analysis of those real crash cases showed the potential for an expert rider to avoid the collision. An early reaction of the rider, associated with a correct application of the brakes would have avoided 18 of the 37 car following/crossing scenarios. Conversely, according to the analysis, an expert rider would not have been able to avoid 19 of the 37 cases. In 14 of those 19 cases, the AB would have contributed to mitigating the crash outcome. This study demonstrated significant potential for

  15. Determination of small-field correction factors for cylindrical ionization chambers using a semiempirical method.

    Science.gov (United States)

    Park, Kwangwoo; Bak, Jino; Park, Sungho; Choi, Wonhoon; Park, Suk Won

    2016-02-07

    A semiempirical method based on the averaging effect of the sensitive volumes of different air-filled ionization chambers (ICs) was employed to approximate the correction factors for beam quality produced from the difference in the sizes of the reference field and small fields.We measured the output factors using several cylindrical ICs and calculated the correction factors using a mathematical method similar to deconvolution; in the method, we modeled the variable and inhomogeneous energy fluence function within the chamber cavity. The parameters of the modeled function and the correction factors were determined by solving a developed system of equations as well as on the basis of the measurement data and the geometry of the chambers. Further, Monte Carlo (MC) computations were performed using the Monaco® treatment planning system to validate the proposed method.The determined correction factors () were comparable to the values derived from the MC computations performed using Monaco®. For example, for a 6 MV photon beam and a field size of 1  ×  1 cm2, was calculated to be for a PTW 31010 chamber and for a PTW 31016 chamber. On the other hand, the values determined from the MC computations were 1.121 and 1.031, respectively; the difference between the proposed method and the MC computation is less than 2%. In addition, we determined the values for PTW 30013, PTW 31010, PTW 31016, IBA FC23-C, and IBA CC13 chambers as well.We devised a method for determining from both the measurement of the output factors and model-based mathematical computation. The proposed method can be useful in case the MC simulation would not be applicable for the clinical settings.

  16. LHV teenindusbüroo = LHV Service Bureau

    Index Scriptorium Estoniae

    2012-01-01

    LHV Panga teenindusbüroo (Tallinn, Tartu mnt. 2) sisekujundusest. Sisearhitektid Kerli Lepp ja Pille Lausmäe (Pille Lausmäe SAB), loetletud nende ühiselt tehtud töid. Arhitektid Andres Alver ja Tiit Trummal

  17. LHV teenindusbüroo = LHV Service Bureau

    Index Scriptorium Estoniae

    2012-01-01

    LHV Panga teenindusbüroo (Tallinn, Tartu mnt. 2) sisekujundusest. Sisearhitektid Kerli Lepp ja Pille Lausmäe (Pille Lausmäe SAB), loetletud nende ühiselt tehtud töid. Arhitektid Andres Alver ja Tiit Trummal

  18. Wolluizen en schildluizen steeds groter probleem in roos

    NARCIS (Netherlands)

    Pijnakker, J.; Ramakers, P.M.J.

    2010-01-01

    Sinds het wegvallen van de meeste breedwerkende bestrijdingsmiddelen zijn wolluizen en schildluizen weer plagen in roos. Vaak raakt daarbij het hele gewas besmet. Soms moeten telers daarom hun gewas voortijdig ruimen. Sluipwespen en roofkevers zijn de belangrijkste natuurlijke vijanden van wol- en s

  19. Gezocht: de beste roofmijt voor Californische trips in roos

    NARCIS (Netherlands)

    Arkesteijn, M.; Pijnakker, J.

    2012-01-01

    De Californische trips, Frankliniella occidentalis, is een van de belangrijkste plagen in de glastuinbouw. De introductie van deze trips dateert van 1984. Het plaaginsect vormt nu een struikelblok voor de verdere uitbreiding van geïntegreerde bestrijding. In roos kan een klein aantal van deze tripse

  20. Characterization of a CT ionization chamber for radiation field mapping.

    Science.gov (United States)

    Perini, Ana P; Neves, Lucio P; Vivolo, Vitor; Xavier, Marcos; Khoury, Helen J; Caldas, Linda V E

    2012-07-01

    A pencil-type ionization chamber, developed at Instituto de Pesquisas Energéticas e Nucleares (IPEN), was characterized with the objective to verify the possibility of its application in radiation field mapping procedures. The characterization tests were evaluated, and the results were satisfactory. The results obtained for the X radiation field mapping with the homemade chamber were compared with those of a PTW Farmer-type chamber (TN 30011-1). The maximum difference observed in this comparison was only 1.25%, showing good agreement. Copyright © 2011 Elsevier Ltd. All rights reserved.

  1. Quantification of static magnetic field effects on radiotherapy ionization chambers

    Science.gov (United States)

    Agnew, J.; O’Grady, F.; Young, R.; Duane, S.; Budgell, G. J.

    2017-03-01

    Integrated magnetic resonance (MR) imaging and radiotherapy (RT) delivery machines are currently being developed, with some already in clinical use. It is anticipated that the strong magnetic field used in some MR-RT designs will have a significant impact on routine measurements of dose in the MR-linac performed using ionization chambers, which provide traceability back to a primary standard definition of dose. In particular, the presence of small air gaps around ionization chambers may introduce unacceptably high uncertainty into these measurements. In this study, we investigate and quantify the variation attributable to air gaps for several routinely-used cylindrical ionization chambers in a magnetic field, as well as the effect of the magnetic field alone on the response of the chambers. The measurements were performed in a Co-60 beam, while the ionization chambers were positioned in custom-made Perspex phantoms between the poles of an electromagnet, which was capable of generating magnetic fields of up to 2 T field strength, although measurements were focused around 1.5 T. When an asymmetric air gap was rotated at cardinal angles around the ionization chambers investigated here, variation of up to 8.5  ±  0.2 percentage points (PTW 31006 chamber) was observed in an applied magnetic field of 1.5 T. The minimum peak-to-peak variation was 1.1  ±  0.1% (Exradin A1SL). When the same experiment was performed with a well-defined air gap of known position using the PTW 30013 chamber, a variation of 3.8  ±  0.2% was observed. When water was added to the phantom cavity to eliminate all air gaps, the variation for the PTW 30013 was reduced to 0.2  ±  0.01%.

  2. The Sac Actun System, Quintana Roo, Mexico; Sistema Sac Actun, Quintana Roo, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Kambesis, P. N.; Coke, J. G.

    2016-07-01

    The Sac Actun system, located in northeast Quintana Roo, Mexico, is among the most extensive underwater cave systems located along the Caribbean coast of the Yucatan Peninsula. The cave is composed of linear phreatic conduits that have two forms. The coastal sections of the Sac Actun system are characterized by low horizontal tunnels that form mazes paralleling the coast and rudimentary conduits broken by fracture-controlled rooms. Inland passages are fault/fracture controlled, have a linear, anastomotic configuration, and align perpendicular to the coast. Access to the cave system is gained through cenotes which are the portals into the Yucatan underwater cave systems. The occurrence of drowned speleothems in many parts of the cave system, and sections of air-filled upper level passages are indicative of major fluctuations in sea level. The Sac Actun system is part of one of the most extensive and significant eogenetic karst aquifers in the world. The development of the Sac Actun system, as well as the many other caves systems along the Yucatan Caribbean Coast is controlled by the coastal hydrologic regime, driven by glacio-eustatics, and influenced by stratigraphic and structural controls. The karstic permeability of the aquifer makes it and the Sac Actun system vulnerable to the anthropogenic impacts of increased population growth, quarries, and infrastructure development associated with the burgeoning tourist industry that dominates land use in the region. (Author)

  3. Analysis of the stability of PTW riders in autonomous braking scenarios.

    Science.gov (United States)

    Symeonidis, Ioannis; Kavadarli, Gueven; Erich, Schuller; Graw, Matthias; Peldschus, Steffen

    2012-11-01

    While fatalities of car occupants in the EU decreased remarkably over the last decade, Powered Two Wheelers (PTWs) fatalities still increase following the increase of PTW ownership. Autonomous braking systems have been implemented in several types of vehicles and are presently addressed by research in the field of PTWs. A major concern in this context is the rider stability. Experiments with volunteers were performed in order to find out whether autonomous braking for PTWs will produce a greater instability of the rider in comparison to manual braking. The PTW's braking conditions were simulated in a laboratory with a motorcycle mock-up mounted on a sled, which was accelerated with an average of 0.35 g. The motion of the rider was captured in autonomous braking scenarios with and without pre-warning as well as in manual braking scenarios. No significant differences between the scenarios were found with respect to maximum forward displacement of the volunteer's torso and head (pautonomous braking at low deceleration will not cause significant instabilities of the rider in comparison to manual braking in idealized laboratory conditions. Based on this, further research into the development and implementation of autonomous braking systems for PTWs, e.g. by extensive riding tests, seems valuable.

  4. Determination of Correction Factors for Small Field Based on Measurement and Numerical Calculation using Cylindrical Ionization Chambers

    CERN Document Server

    Park, Kwangwoo; Park, Sungho; Choi, Jin Hwa; Park, Suk Won; Bak, Jino

    2015-01-01

    We studied the investigation of volume averaging effect for air-filled cylindrical ionization chambers to determine correction factors in small photon field for the given chamber. As a method, we measured output factors using several cylindrical ionization chambers and calculated with mathematical method similar to deconvolution in which we modeled non-constant and inhomogeneous exposure function in the cavity of chamber. The parameters in exposure function and correction factors were determined by solving a system of equations we developed with measurement data and geometry of the given chamber. Correction factors (CFs) we had found are very similar to that from Monte Carlo (MC) simulation. For example, CFs in this study were computed as 1.116 for PTW31010, and 1.0225 for PTW31016, while CFs from MC were reported as approximately between 1.17 and 1.20 for PTW31010, and between 1.02 and 1.06 for PTW31016 in of 6MV photon beam . Furthermore, the result from the method of deconvolution combined with MC for cham...

  5. Technical Note: Experimental determination of the effective point of measurement of two cylindrical ionization chambers in a clinical proton beam

    Energy Technology Data Exchange (ETDEWEB)

    Sugama, Yuya, E-mail: yuya.sugama@gmail.com [Proton Therapy Center, Aizawa Hospital, Nagano 390-0821, Japan and Interdisciplinary Graduate School of Medicine and Engineering, University of Yamanashi, Yamanashi 409-3898 (Japan); Nishio, Teiji [Institute of Biomedical and Health Sciences, Hiroshima University, Hiroshima 734-8551 (Japan); Onishi, Hiroshi [Interdisciplinary Graduate School of Medicine and Engineering, University of Yamanashi, Yamanashi 409-3898 (Japan)

    2015-07-15

    Purpose: IAEA TRS-398 notes that cylindrical ionization chambers are preferred for reference proton dosimetry. If a cylindrical ionization chamber is used in a phantom to measure the dose as a function of depth, the effective point of measurement (EPOM) must be taken into account. IAEA TRS-398 recommends a displacement of 0.75 times the inner cavity radius (0.75R) for heavy ion beams. Theoretical models by Palmans and by Bhullar and Watchman confirmed this value. However, the experimental results vary from author to author. The purpose of this study is to accurately measure the displacement and explain the past experimental discrepancies. Methods: In this work, we measured the EPOM of cylindrical ionization chambers with high accuracy by comparing the Bragg-peak position obtained with cylindrical ionization chambers (PTW 30013, PTW 31016) to that obtained using a plane-parallel ionization chamber (PTW 34045). Results: The EPOMs of PTW 30013 and 31016 were shifted by 0.92 ± 0.07 R with R = 3.05 mm and 0.90 ± 0.14 R with R = 1.45 mm, respectively, from the reference point toward the source. Conclusions: The EPOMs obtained were greater than the value of 0.75R proposed by the IAEA TRS-398 and the analytical results.

  6. Condiciones alimentarias de los mayas macehuales de Quintana Roo

    Directory of Open Access Journals (Sweden)

    Virginia Ivonne Sánchez Vázquez

    2011-07-01

    Full Text Available Las políticas alimentarias ofrecen una visión oficial sobre las condiciones de la alimentación en México, y específicamente en el México rural indígena, pero a partir de un estudio de caso con los grupos mayas macehuales de Quintana Roo, se muestra el contexto de confrontación donde las comunidades despliegan sus pautas de reproducción social, ciertamente en desventaja estructural, pero no de manera pasiva, sino creando y recreando opciones bajo su marco cultural situado.

  7. [Epiphytic algae from Bajo Pepito, Isla Mujeres, Quintana Roo, Mexico].

    Science.gov (United States)

    Quan-Young, L I; Díaz-Martín, M A; Espinoza-Avalos, J

    2006-06-01

    A total of 96 epiphytic algae species were identified from Bajo Pepito, Quintana Roo, México. 60.4% (58) belonged to the Rhodophyta, 19.79% (19) to the Phaeophyta, 16.6% (16) to the Chlorophyta and 3.1% (3) to the Cyanophyta; 49 species (50.5%) were found only in one month, while Heterosiphonia crispella was found in all of the sampled months. That species provided the largest contribution to the biomass of epiphytes. During January we registered the greater biommass and richness of epiphytes species, coincidently with high values of host species cover and rainfall.

  8. Dosimetric characterization of the PTW Seven29 dosimeter and Octavius Phantom for IMRT quality control; Caracterizacao dosimetrica do dosimetro PTW Seven29 e Octavius Phantom para controle de qualidade em IMRT

    Energy Technology Data Exchange (ETDEWEB)

    Goncalves, Leandro R.; Habitzreuter, Angela B.; Santos, Gabriela R.; Watanabe, Erica Y.; Silva, Marco A.; Menegussi, Gisela; Rodrigues, Laura N.; Furnari, Laura, E-mail: leandrorg11@hotmail.com [Instituto do Cacer do Estado de Sao Paulo (ICESP), SP (Brazil). Servico de Radioterapia

    2012-12-15

    Techniques like IMRT, VMAT and tomotherapy has been used to improve dose conformity in the target, while sparing adjacent normal tissues. The complexity of this techniques challenge to correctly verify the dose delivery, in an independent way. Matrix detectors have been used for this purpose. Although, to exactly understand the dosimeter response and to identify his limitations, characterization measurements need to be performed. These dosimeters, for instance, can present angular dependence. Phantoms has been designed to, when used together the detector, eliminate this angular dependence. The aim of this work was to characterize PTW Seven 29 dosimeter and also his use with Octavius Phantom (PTW). The dosimeter showed reproducible with 0.25% the biggest standard deviation, good dose linearity and dose rate independence. Differences for output factors were obtained (<6%), but a clinical case measurement showed that the set can be used for IMRT verification. When used with Octavius Phantom the dosimeter showed low angular dependence. (author)

  9. Polarity correction factor for flattening filter free photon beams in several cylindrical ionization chambers.

    Science.gov (United States)

    Ogata, Toshiyuki; Uehara, Kazuyuki; Nakayama, Masao; Tsudou, Shinji; Masutani, Takashi; Okayama, Takanobu

    2016-07-01

    In this study, we aimed to compare the polarity correction factor in ionization chambers for flattening filter free (FFF) photon beams and flattening filter (FF) beams. Measurements were performed with both 6 and 10 MV FFF and FF beams. Five commercial ionization chambers were evaluated: PTW TN30013; IBA Dosimetry CC01, CC04, and CC13; and Exradin A12S. Except for the CC01 ionization chamber, the other four chambers showed less than a 0.3 % difference in the polarity effect between the FFF and the FF beams. The CC01 chamber showed a strong field-size-dependence, unlike the other chambers. The polarity effect for all chambers with FFF beams did not change with the dose rate. Except in the case of the CC01 chamber, the difference in the polarity effect between FFF and FF beams was not significant.

  10. Waardplantgeschiktheid van roos voor het wortelknobbelaaltje Meloidogyne hapla : zeven M. hapla-isolaten, zes cultivars en een onderstam

    NARCIS (Netherlands)

    Amsing, J.J.; Beek, van der J.G.; Stapel, L.H.M.; Poleij, L.M.; Hok-A-Hin, C.H.; Zoon, F.C.

    2003-01-01

    Het noordelijk wortelknobbelaaltje, Meloidogyne hapla, wordt de laatste jaren steeds vaker aangetroffen in substraatteelten van roos. Onderzoek naar de schadelijkheid en populatieontwikkeling van dit wortelaaltje bij roos op substraat vereist de aanwezigheid van een vatbare cultivar of onderstam en

  11. SU-E-T-623: Polarity Effects for Small Volume Ionization Chambers in Cobalt-60 Beams

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Y; Bhatnagar, J; Huq, M Saiful [Department of Radiation Oncology, University of Pittsburgh Cancer Institute and UPMC Cancer Center, Pittsburgh, PA (United States)

    2015-06-15

    Purpose: To investigate the polarity effects for small volume ionization chambers in {sup 60}Co gamma-ray beams using the Leksell Gamma Knife Perfexion. Methods: Measurements were made for 7 small volume ionization chambers (a PTW 31016, an Exradin A14, 2 Capintec PR0-5P, and 3 Exradin A16) using a PTW UNIDOSwebline Universal Dosemeter and an ELEKTA solid water phantom with proper inserts. For each ion chamber, the temperature/pressure corrected electric charge readings were obtained for 16 voltage values (±50V, ±100V, ±200V, ±300V, ±400V, ±500V, ±600V, ±700V). For each voltage, a five-minute leakage charge reading and a series of 2-minute readings were continuously taken during irradiation until 5 stable signals (less than 0.05% variation) were obtained. The average of the 5 reading was then used for the calculation of the polarity corrections at the voltage and for generating the saturation curves. Results: The polarity effects are more pronounced at high or low voltages than at the medium voltages for all chambers studied. The voltage dependence of the 3 Exradin A16 chambers is similar in shape. The polarity corrections for the Exradin A16 chambers changes rapidly from about 1 at 500V to about 0.98 at 700V. The polarity corrections for the 7 ion chambers at 300V are in the range from 0.9925 (for the PTW31016) to 1.0035 (for an Exradin A16). Conclusion: The polarity corrections for certain micro-chambers are large even at normal operating voltage.

  12. Evaluation of scaling factors for the PTW RW3 plastic mannequin in electron beams; Evaluacion de los factores de puesta en escala para el maniqui plastico RW3 de PTW en haces de electrones

    Energy Technology Data Exchange (ETDEWEB)

    Moral Sanchez, S. C.; Bragado Alvarez, L.; Erzilbengoa, M.; Guisasola Berasategui, M. A.

    2011-07-01

    The International Code of Practice TRS-398 dosimetry published by the International Atomic Energy Agency (IAEA, 2004) are presented as a guide, the values ??for the scaling factor of depth, cp1, the factor scaling of flow, and the nominal density h1, p, 1, for some plastic materials discouraging in any case, its use in electron beam qualities R50> 4 g / cm (10Mev Energies above). In our study, we evaluated these scaling factors for the RW3 plastic phantom (PTW Freiburg).

  13. Determination of small-field correction factors for cylindrical ionization chambers using a semiempirical method

    Science.gov (United States)

    Park, Kwangwoo; Bak, Jino; Park, Sungho; Choi, Wonhoon; Park, Suk Won

    2016-02-01

    A semiempirical method based on the averaging effect of the sensitive volumes of different air-filled ionization chambers (ICs) was employed to approximate the correction factors for beam quality produced from the difference in the sizes of the reference field and small fields. We measured the output factors using several cylindrical ICs and calculated the correction factors using a mathematical method similar to deconvolution; in the method, we modeled the variable and inhomogeneous energy fluence function within the chamber cavity. The parameters of the modeled function and the correction factors were determined by solving a developed system of equations as well as on the basis of the measurement data and the geometry of the chambers. Further, Monte Carlo (MC) computations were performed using the Monaco® treatment planning system to validate the proposed method. The determined correction factors (k{{Q\\text{msr}},Q}{{f\\text{smf}}, {{f}\\text{ref}}} ) were comparable to the values derived from the MC computations performed using Monaco®. For example, for a 6 MV photon beam and a field size of 1  ×  1 cm2, k{{Q\\text{msr}},Q}{{f\\text{smf}}, {{f}\\text{ref}}} was calculated to be 1.125 for a PTW 31010 chamber and 1.022 for a PTW 31016 chamber. On the other hand, the k{{Q\\text{msr}},Q}{{f\\text{smf}}, {{f}\\text{ref}}} values determined from the MC computations were 1.121 and 1.031, respectively; the difference between the proposed method and the MC computation is less than 2%. In addition, we determined the k{{Q\\text{msr}},Q}{{f\\text{smf}}, {{f}\\text{ref}}} values for PTW 30013, PTW 31010, PTW 31016, IBA FC23-C, and IBA CC13 chambers as well. We devised a method for determining k{{Q\\text{msr}},Q}{{f\\text{smf}}, {{f}\\text{ref}}} from both the measurement of the output factors and model-based mathematical computation. The proposed method can be useful in case the MC simulation would not be applicable for the clinical settings.

  14. Age McCanni büroo = Offices of Age McCann

    Index Scriptorium Estoniae

    2010-01-01

    Tallinnas Rotermanni 8 asuva Age McCanni büroo sisekujundusest. Sisekujunduse autorid: sisearhitekt Kerli Valk (Kukuhaus OÜ) ja arhitekt Tomomi Hayashi (HG Arhitektuur OÜ), nende tähtsamate tööde loetelu

  15. Age McCanni büroo = Offices of Age McCann

    Index Scriptorium Estoniae

    2010-01-01

    Tallinnas Rotermanni 8 asuva Age McCanni büroo sisekujundusest. Sisekujunduse autorid: sisearhitekt Kerli Valk (Kukuhaus OÜ) ja arhitekt Tomomi Hayashi (HG Arhitektuur OÜ), nende tähtsamate tööde loetelu

  16. Background Material for the Human Studies Review Board's Review of Hansson and Roos 1987

    Science.gov (United States)

    Journal article and details of EPA's science and ethics reviews of the study by Hansson and Roos from 1987: The Effect of Fluoride and Calcium on Spinal Bone Mineral Content: A Controlled, Prospective (3 Years) Study.

  17. Twilio Eesti büroo = Offices of Twilio Estonia / Katrin Kaevats ; kommenteerinud Ann Koljang

    Index Scriptorium Estoniae

    Kaevats, Katrin, 1980-

    2016-01-01

    Rahvusvahelise ettevõtte Twilio Eesti büroo Tallinnas, Veerenni tn. 24. Sisekujunduse autorid Katrin Kaevats, Jaan Port, Markus Nimik, Neeme Tiimus, Anna Nikland. Büroohoone projekteerisid PIN Arhitektid

  18. "Parlament 95" = "Parliament 95" / Ionel Lehari, Janno Roos ; kommenteerinud Illi Ong

    Index Scriptorium Estoniae

    Lehari, Ionel, 1967-

    2015-01-01

    Rändnäitus "Parlament 95" Eesti suuremate linnade kaubanduskeskustes. Autorid Janno Roos, Andres Labi (Ruumilabor), Ionel Lehari, Maret Põldre (Identity), Taavi Rull. Eesti Sisearhitektide Liidu aastapreemia 2014/2015 parima installatsiooni eest

  19. spark chamber

    CERN Multimedia

    A few cosmic rays pass through your body every second of every day, no matter where you are. Look at the spark chamber to your right – every flash is the track made by a cosmic ray from outer space. The spark chamber is filled with a special gas mixture. Cosmic rays knock electrons out of the atoms in the gas. These electrons accelerate towards high voltage metal strips layered throughout the chamber, creating sparks like little bolts of lightning.

  20. spark chamber

    CERN Multimedia

    A few cosmic rays pass through your body every second of every day, no matter where you are. Look at the spark chamber to your right – every flash is the track made by a cosmic ray from outer space. The spark chamber is filled with a special gas mixture. Cosmic rays knock electrons out of the atoms in the gas. These electrons accelerate towards high voltage metal strips layered throughout the chamber, creating sparks like little bolts of lightning.

  1. Experimental determination of wall correction factors. Pt. 2; NACP and Markus plane-parallel ionization chambers

    Energy Technology Data Exchange (ETDEWEB)

    Wittkaemper, F.W.; Mijnheer, B.J. (Nederlands Kanker Inst. ' Antoni van Leeuwenhoekhuis' , Amsterdam (Netherlands)); Aalbers, A.H.L. (Netherlands Measurements Inst., Bilthoven (Netherlands))

    1992-04-01

    The formalism to derive the absorbed dose to water from ionization chamber measurements in a phantom includes several wall correction factors depending on shape, size and composition of the chamber. Wall correction factors have been measured for a number of NACP and PTW/Markers Chambers. Significant deviations from calculated values occur due to uncertainties in the contribution to the total ionization from the different materials of these inhomogeneous ionization chambers. The discrepancies illustrate the need for the development of a homogeneous plane-parallel chamber. In addition, detailed Monte Carlo calculations, taking the different wall materials into account, are required to quantitatively predict the response of heterogeneous plane-parallel chambers in photon beams. (UK).

  2. Analysis of dosimetry of a Gamma Knife Perfexion using polystyrene and solid water phantoms for small volume ionization chambers; Analise da dosimetria de um Gamma Knife Perfexion utilizando phantoms de poliestireno e de agua solida para camaras de ionizacao de volume pequeno

    Energy Technology Data Exchange (ETDEWEB)

    Costa, N.A.; Potiens, M.P.A., E-mail: nathaliaac@ymail.com [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Saraiva, C.W.C. [Hospital do Coracao (HCor), Sao Paulo, SP (Brazil); Benmakhlouf, H. [Stockholm University, Karolinska Hospital (Sweden)

    2016-07-01

    The Gamma Knife Perfexion (GKP) is a radiosurgery equipment that has been developed by Elekta. Its dose-rate calibration is performed using phantoms developed by Elekta and a small volume ionization chamber. The purpose of this study was to evaluate the collected charge values obtained in its dosimetry using two different phantoms, polystyrene and solid water and the ion chambers PTW Semiflex, volume 0,125 cm{sup 3}, model 31010 and PTW Pinpoint, volume 0,016 cm{sup 3}, model 31016. (author)

  3. Las playas de Quintana Roo: sus riesgos y vulnerabilidad.

    Directory of Open Access Journals (Sweden)

    Daniel Torruco Gómez

    2013-01-01

    Full Text Available Las playas son sistemas donde se ejercen presiones antrópicas y ambientales, en este estudio se analizaron sus condiciones bioeconómicas con la finalidad de obtener un modelo que permita determinar el grado de vulnerabilidad y la matriz de riesgo en las playas del Estado de Quintana Roo para un mejor uso sustentable. Se formularon matrices con registros biológicos y socioeconómicos obtenidos entre el 2009 y 2010 en temporadas de alto registro turístico, obteniendo 17 variables en 20 playas analizadas. La evaluación se efectuó con el modelo semiparamétrico del tipo KSIM con dos escenarios: uno sin control/restricción en el desarrollo costero y otro con las mismas características pero con decremento en demanda turística por baja calidad ambiental. Los resultados mostraron un marcado descenso en playas arenosas y costas rocosas. En el modelo se hace referencia a la importancia de los procesos de las playas y su interrelación con los factores biológicos, sociales y económicos más importantes, proporcionando una visión integral de todas las variables. Se recomienda incrementar el modelo dándole mayor envergadura, integrando a las instituciones que influyen en el control de las acciones en estas playas, lo que dará un mejor referente y monitoreo a corto, mediano y largo plazo.

  4. wire chamber

    CERN Multimedia

    Proportional multi-wire chamber. Multi-wire detectors contain layers of positively and negatively charged wires enclosed in a chamber full of gas. A charged particle passing through the chamber knocks negatively charged electrons out of atoms in the gas, leaving behind positive ions. The electrons are pulled towards the positively charged wires. They collide with other atoms on the way, producing an avalanche of electrons and ions. The movement of these electrons and ions induces an electric pulse in the wires which is collected by fast electronics. The size of the pulse is proportional to the energy loss of the original particle. Proportional wire chambers allow a much quicker reading than the optical or magnetoscriptive readout wire chambers.

  5. Wire Chamber

    CERN Multimedia

    Magnetoscriptive readout wire chamber. Multi-wire detectors contain layers of positively and negatively charged wires enclosed in a chamber full of gas. A charged particle passing through the chamber knocks negatively charged electrons out of atoms in the gas, leaving behind positive ions. The electrons are pulled towards the positively charged wires. They collide with other atoms on the way, producing an avalanche of electrons and ions. The movement of these electrons and ions induces an electric pulse in the wires which is collected by fast electronics. The size of the pulse is proportional to the energy loss of the original particle.

  6. wire chamber

    CERN Multimedia

    1967-01-01

    Magnetoscriptive readout wire chamber.Multi-wire detectors contain layers of positively and negatively charged wires enclosed in a chamber full of gas. A charged particle passing through the chamber knocks negatively charged electrons out of atoms in the gas, leaving behind positive ions. The electrons are pulled towards the positively charged wires. They collide with other atoms on the way, producing an avalanche of electrons and ions. The movement of these electrons and ions induces an electric pulse in the wires which is collected by fast electronics. The size of the pulse is proportional to the energy loss of the original particle.

  7. Entomopathogenic fungi from 'El Eden' Ecological Reserve, Quintana Roo, Mexico.

    Science.gov (United States)

    Torres-Barragán; Anaya, Ana Luisa; Alatorre, Raquel; Toriello, Conchita

    2004-07-01

    Entomopathogenic fungi were isolated and identified from insects collected from the tropical forest and an agricultural area at El Eden Ecological Reserve, Quintana Roo, Mexico. These fungi were studied to determine their potential as biological control agents of greenhouse Trialeurodes vaporariorum (Homoptera: Aleyrodidae), and to contribute to the knowledge of biodiversity of this area. No pest insects were observed in the tropical forest. In contrast, all insects collected in the agricultural area were considered important pests by the local farmers, with the whitefly, as the most relevant, plentiful in Cucurbitaceae plants. From approximately 3400 collected insects in three different surveys, different anamorphic Ascomycetes were recovered. One isolate of Aspergillus sp., two of Penicillium sp., three of Paecilomyces marquandii, and three of Verticillium sp. out of 308 insects (2.9%) from three insect orders, Hymenoptera, Diptera and Isoptera in the tropical forest. In contrast, a higher number of fungal isolates were recovered from the agricultural area: three isolates from Aspergillus parasiticus, 100 of Fusarium moniliforme, one of Aschersonia sp., and 246 of Fusarium oxysporum out of 3100 insects (11.3%) from three insect orders, Homoptera, Coleoptera and Lepidoptera. The results of this study show Fusarium moniliforme and F oxysporum as highly virulent to infected insects in the agricultural area, with 100 and 246 isolates respectively, out of 350 infected insects of 3100 studied specimens. Laboratory whitefly nymph bioassays with isolates Ed29a of F. moniliforme, Ed322 of F. oxysporum, and Ed22 of P marquandii showed 96 to 97.5% insect mortality with no significant differences (P < 0.05) among them. F. oxysporum Ed322 produced no mortality when inoculated on tomato, bean, squash and maize seedlings (with and without injuries) compared to the 100% mortality caused by phytopathogenic strains, F. oxysporum f. sp. lycopersici and F. oxysporum f. sp. radicis

  8. Wire Chamber

    CERN Multimedia

    1986-01-01

    Two wire chambers made originally for the R807 Experiment at CERN's Intersecting Storage Rings. In 1986 they were used for the PS 201 experiment (Obelix Experiment) at LEAR, the Low Energy Antiproton Ring. The group of researchers from Turin, using the chambers at that time, changed the acquisition system using for the first time 8 bit (10 bit non linear) analog to digital conversion for incoming signals from the chambers. The acquisition system was controlled by 54 CPU and 80 digital signal processors. The power required for all the electronics was 40 kW. For the period, this system was one of the most powerful on-line apparatus in the world. The Obelix Experiment was closed in 1996. To find more about how a wire chamber works, see the description for object CERN-OBJ-DE-038.

  9. Characterization of a CT ionization chamber for radiation field mapping

    Energy Technology Data Exchange (ETDEWEB)

    Perini, Ana P., E-mail: aperini@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN), Comissao Nacional de Energia Nuclear, Av. Prof. Lineu Prestes 2242, 05508-000, Sao Paulo, SP (Brazil); Neves, Lucio P., E-mail: lpneves@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN), Comissao Nacional de Energia Nuclear, Av. Prof. Lineu Prestes 2242, 05508-000, Sao Paulo, SP (Brazil); Vivolo, Vitor, E-mail: vivolo@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN), Comissao Nacional de Energia Nuclear, Av. Prof. Lineu Prestes 2242, 05508-000, Sao Paulo, SP (Brazil); Xavier, Marcos, E-mail: mxavier@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN), Comissao Nacional de Energia Nuclear, Av. Prof. Lineu Prestes 2242, 05508-000, Sao Paulo, SP (Brazil); Khoury, Helen J., E-mail: hjkhoury@gmail.com [Universidade Federal de Pernambuco, Departamento de Energia Nuclear, Av. Prof. Luiz Freire 1000, 50740-540, Recife, PE (Brazil); Caldas, Linda V.E., E-mail: lcaldas@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN), Comissao Nacional de Energia Nuclear, Av. Prof. Lineu Prestes 2242, 05508-000, Sao Paulo, SP (Brazil)

    2012-07-15

    A pencil-type ionization chamber, developed at Instituto de Pesquisas Energeticas e Nucleares (IPEN), was characterized with the objective to verify the possibility of its application in radiation field mapping procedures. The characterization tests were evaluated, and the results were satisfactory. The results obtained for the X radiation field mapping with the homemade chamber were compared with those of a PTW Farmer-type chamber (TN 30011-1). The maximum difference observed in this comparison was only 1.25%, showing good agreement. - Highlights: Black-Right-Pointing-Pointer A new ionization chamber was made and tested for radiation field mapping. Black-Right-Pointing-Pointer This ionization chamber was made using only accessible low cost materials. Black-Right-Pointing-Pointer The operational tests were made and the results were within the recommended limits. Black-Right-Pointing-Pointer The field map was compared with a commercial chamber presenting a 1.25% difference. Black-Right-Pointing-Pointer Our chamber presents potential for assurance reliability in calibration procedures.

  10. Flora planctónica de laguna Lagartos, Quintana Roo Planktonic flora from Lagartos Lagoon, Quintana Roo

    Directory of Open Access Journals (Sweden)

    Viridiana Margarita Nava-Ruiz

    2012-09-01

    Full Text Available Se presenta una lista de la flora planctónica de la laguna Lagartos, basada en la observación de muestras superficiales obtenidas entre noviembre de 2007 a septiembre de 2008. Las muestras se recolectaron con una botella Van Dorn de 2 litros en la parte central de la laguna; se registraron 67 taxa: 28 Bacillariophyta, 22 Cyanoprokaryota, 7 Chlorophyta, 6 Dinoflagellata, 2 Euglenophyta y 2 Cryptophyta. Las cianofitas dominaron durante todo el periodo de estudio, con una contribución mayor al 80% de la abundancia total del fitoplancton. Son nuevos registros para México 13 especies: Chroococcus pulcherrimus, Coelosphaerium confertum, Cyanodyction iac, Phormidium pachydermaticum, Planktolyngbya contorta, Rhodomonas minuta, Amphidinium massartii, Ensiculifera cf. loeblichii, Heterocapsa cf. pseudotriquetra, Prorocentrum cassubicum, Licmophora normaniana, Fistulifera saprophila y Amphora richardiana. Todos los taxa listados se ilustran con microfotografías.The planktonic flora from Lagartos Lagoon, Quintana Roo, was examined based on the observation of samples collected from November 2007 to September 2008. The superficial samples were collected with a Van Dorn bottle of 2 L, in the core part of the lagoon. A total of 67 taxa were identified: 28 Bacillariophyta, 22 Cyanoprokaryota, 7 Chlorophyta, 6 Dinoflagellata, 2 Euglenophyta and 2 Cryptophyta. Nevertheless, the blue green algae dominated during all study period, with more of 80% to the total abundance of the phytoplankton. The species Chroococcus pulcherrimus, Coelosphaerium confertum, Cyanodyction iac, Phormidium pachydermaticum, Planktolyngbya contorta, Rhodomonas minuta, Amphidinium massartii, Ensiculifera cf. loeblichii, Heterocapsa cf. pseudotriquetra, Prorocentrum cassubicum, Licmophora normaniana, Fistulifera saprophila and Amphora richardiana were recorded for the first time in Mexico. All the taxa are illustrated with microphotographs.

  11. A critical evaluation of the PTW 2D-ARRAY seven29 and OCTAVIUS II phantom for IMRT and VMAT verification.

    Science.gov (United States)

    Hussein, Mohammad; Adams, Elizabeth J; Jordan, Thomas J; Clark, Catharine H; Nisbet, Andrew

    2013-11-04

    Quality assurance (QA) for intensity- and volumetric-modulated radiotherapy (IMRT and VMAT) has evolved substantially. In recent years, various commercial 2D and 3D ionization chamber or diode detector arrays have become available, allowing for absolute verification with near real time results, allowing for streamlined QA. However, detector arrays are limited by their resolution, giving rise to concerns about their sensitivity to errors. Understanding the limitations of these devices is therefore critical. In this study, the sensitivity and resolution of the PTW 2D-ARRAY seven29 and OCTAVIUS II phantom combination was comprehensively characterized for use in dynamic sliding window IMRT and RapidArc verification. Measurement comparisons were made between single acquisition and a multiple merged acquisition techniques to improve the effective resolution of the 2D-ARRAY, as well as comparisons against GAFCHROMIC EBT2 film and electronic portal imaging dosimetry (EPID). The sensitivity and resolution of the 2D-ARRAY was tested using two gantry angle 0° modulated test fields. Deliberate multileaf collimator (MLC) errors of 1, 2, and 5 mm and collimator rotation errors were inserted into IMRT and RapidArc plans for pelvis and head & neck sites, to test sensitivity to errors. The radiobiological impact of these errors was assessed to determine the gamma index passing criteria to be used with the 2D-ARRAY to detect clinically relevant errors. For gamma index distributions, it was found that the 2D-ARRAY in single acquisition mode was comparable to multiple acquisition modes, as well as film and EPID. It was found that the commonly used gamma index criteria of 3% dose difference or 3 mm distance to agreement may potentially mask clinically relevant errors. Gamma index criteria of 3%/2 mm with a passing threshold of 98%, or 2%/2 mm with a passing threshold of 95%, were found to be more sensitive. We suggest that the gamma index passing thresholds may be used for guidance

  12. Experimental determination of pCo perturbation factors for plane-parallel chambers.

    Science.gov (United States)

    Kapsch, R P; Bruggmoser, G; Christ, G; Dohm, O S; Hartmann, G H; Schüle, E

    2007-12-07

    For plane-parallel chambers used in electron dosimetry, modern dosimetry protocols recommend a cross-calibration against a calibrated cylindrical chamber. The rationale for this is the unacceptably large (up to 3-4%) chamber-to-chamber variations of the perturbation factors (pwall)Co, which have been reported for plane-parallel chambers of a given type. In some recent publications, it was shown that this is no longer the case for modern plane-parallel chambers. The aims of the present study are to obtain reliable information about the variation of the perturbation factors for modern types of plane-parallel chambers, and-if this variation is found to be acceptably small-to determine type-specific mean values for these perturbation factors which can be used for absorbed dose measurements in electron beams using plane-parallel chambers. In an extensive multi-center study, the individual perturbation factors pCo (which are usually assumed to be equal to (pwall)Co) for a total of 35 plane-parallel chambers of the Roos type, 15 chambers of the Markus type and 12 chambers of the Advanced Markus type were determined. From a total of 188 cross-calibration measurements, variations of the pCo values for different chambers of the same type of at most 1.0%, 0.9% and 0.6% were found for the chambers of the Roos, Markus and Advanced Markus types, respectively. The mean pCo values obtained from all measurements are [Formula: see text] and [Formula: see text]; the relative experimental standard deviation of the individual pCo values is less than 0.24% for all chamber types; the relative standard uncertainty of the mean pCo values is 1.1%.

  13. wire chamber

    CERN Multimedia

    Multi-wire detectors contain layers of positively and negatively charged wires enclosed in a chamber full of gas. A charged particle passing through the chamber knocks negatively charged electrons out of atoms in the gas, leaving behind positive ions. The electrons are pulled towards the positively charged wires. They collide with other atoms on the way, producing an avalanche of electrons and ions. The movement of these electrons and ions induces an electric pulse in the wires which is collected by fast electronics. The size of the pulse is proportional to the energy loss of the original particle.

  14. wire chamber

    CERN Multimedia

    Was used in ISR (Intersecting Storage Ring) split field magnet experiment. Multi-wire detectors contain layers of positively and negatively charged wires enclosed in a chamber full of gas. A charged particle passing through the chamber knocks negatively charged electrons out of atoms in the gas, leaving behind positive ions. The electrons are pulled towards the positively charged wires. They collide with other atoms on the way, producing an avalanche of electrons and ions. The movement of these electrons and ions induces an electric pulse in the wires which is collected by fast electronics. The size of the pulse is proportional to the energy loss of the original particle.

  15. Wire chamber

    CERN Multimedia

    Multi-wire detectors contain layers of positively and negatively charged wires enclosed in a chamber full of gas. A charged particle passing through the chamber knocks negatively charged electrons out of atoms in the gas, leaving behind positive ions. The electrons are pulled towards the positively charged wires. They collide with other atoms on the way, producing an avalanche of electrons and ions. The movement of these electrons and ions induces an electric pulse in the wires which is collected by fast electronics. The size of the pulse is proportional to the energy loss of the original particle.

  16. wire chamber

    CERN Multimedia

    1985-01-01

    Multi-wire detectors contain layers of positively and negatively charged wires enclosed in a chamber full of gas. A charged particle passing through the chamber knocks negatively charged electrons out of atoms in the gas, leaving behind positive ions. The electrons are pulled towards the positively charged wires. They collide with other atoms on the way, producing an avalanche of electrons and ions. The movement of these electrons and ions induces an electric pulse in the wires which is collected by fast electronics. The size of the pulse is proportional to the energy loss of the original particle.

  17. 75 FR 22168 - ADSOUTH PARTNERS, Inc., American Racing Capital, Inc., Buck-A-Roo$ Holding Corporation, DDS...

    Science.gov (United States)

    2010-04-27

    ... From the Federal Register Online via the Government Publishing Office SECURITIES AND EXCHANGE COMMISSION ADSOUTH PARTNERS, Inc., American Racing Capital, Inc., Buck-A- Roo$ Holding Corporation, DDS... there is a lack of current and accurate information concerning the securities of Buck-A-Roo$ Holding...

  18. Advokaadid Sten Luiga ja Marti Hääl: pingutame hullult, et muuta oma büroo ... tavaliseks firmaks / Marti Hääl, Sten Luiga

    Index Scriptorium Estoniae

    Hääl, Marti, 1972-

    2010-01-01

    Advokaadibüroo Luiga Mody Hääl Borenius juhid vandeadvokaadid Marti Hääl ja Sten Luiga vastavad küsimustele, mis puudutavad advokaatide kvaliteedistandardeid, büroo tegevuse parandamist kvaliteedijuhtimisega, ISO standardite sisseviimist, juhtimisinfosüsteemi rakendamist ning advokaadibüroo juhtimist

  19. Advokaadid Sten Luiga ja Marti Hääl: pingutame hullult, et muuta oma büroo ... tavaliseks firmaks / Marti Hääl, Sten Luiga

    Index Scriptorium Estoniae

    Hääl, Marti, 1972-

    2010-01-01

    Advokaadibüroo Luiga Mody Hääl Borenius juhid vandeadvokaadid Marti Hääl ja Sten Luiga vastavad küsimustele, mis puudutavad advokaatide kvaliteedistandardeid, büroo tegevuse parandamist kvaliteedijuhtimisega, ISO standardite sisseviimist, juhtimisinfosüsteemi rakendamist ning advokaadibüroo juhtimist

  20. Scheteligi büroo- ja laohoone = Schetelig's Office Building and Warehouse / Epp Lankots

    Index Scriptorium Estoniae

    Lankots, Epp, 1976-

    2000-01-01

    Kahekorruseline, minimalistliku kastja mahuga hoone. Peafassaadi kujunduses on kasutatud firma nime. Projekteerija Arhitektibüroo J. Okas & M. Lõoke. Arhitektid Jüri Okas, Marika Lõoke. Sisekujundaja Kristiina Voolaid. Projekt 1998, valmis 2000. 7 ill. Korruste plaanid, lõige, välisvaated

  1. RooStatsCms: a tool for analyses modelling, combination and statistical studies

    Science.gov (United States)

    Piparo, D.; Schott, G.; Quast, G.

    2009-12-01

    The RooStatsCms (RSC) software framework allows analysis modelling and combination, statistical studies together with the access to sophisticated graphics routines for results visualisation. The goal of the project is to complement the existing analyses by means of their combination and accurate statistical studies.

  2. MarkIT büroo = Offices of MarkIT

    Index Scriptorium Estoniae

    2010-01-01

    Tallinnas Pärnu mnt. 102C asuvas büroohoones paikneva MarkIT büroo sisekujundusest. Sisearhitektid Kard Männil (SAB Miu Miu Miu) ja Loreida Hein (Studio La), nende tähtsamate tööde loetelu. Valge büroomööbel on sisearhitektide projekteeritud. Graafika on sisearhitektid ise joonistanud

  3. RooStatsCms: a tool for analyses modelling, combination and statistical studies

    CERN Document Server

    Piparo, D; Quast, Prof G

    2008-01-01

    The RooStatsCms (RSC) software framework allows analysis modelling and combination, statistical studies together with the access to sophisticated graphics routines for results visualisation. The goal of the project is to complement the existing analyses by means of their combination and accurate statistical studies.

  4. "Riigikogu hoone 90" = "Estonian parliament building 90" / Janno Roos, Andres Labi

    Index Scriptorium Estoniae

    Roos, Janno, 1976-

    2013-01-01

    Eesti Sisearhitektide Liidu 2012. aasta näituse kujunduse preemia pälvinud näitusest (Lossiplats 1A). Kujunduse autorid Janno Roos ja Andres Labi (Ruumilabor). Kuraator Mait Väljas. Graafiline disain: Identity. Sisearhitekti ja ESLi aastapreemiate žürii liikme Mari Kurismaa ning arhitektuuriajaloolase Leele Välja arvamused

  5. Silviculture guide for the mahogany forests of Quintana Roo, Mexico – Criteria and recommendations

    Science.gov (United States)

    P. Negreros-Castillo; L. Cámara-Cabrales; Margaret Devall; M.A. Fajvan; M.A. Mendoza Briseño; C.W. Mize

    2014-01-01

    Silviculture is the art, science and practice of controlling the establishment, composition, health, quality and growth of forests to accomplish a set of management objectives. This publication offers an approach to silviculture of the forests of Quintana Roo in which mahogany (Swietenia macrophylla King), the commercially most important tree species in Latin America,...

  6. Silviculture of the mahogany forest of Quintana Roo, Mexico: criteria and recommendations

    Science.gov (United States)

    P. ​​Negreros-Castillo; L. Camara-Cabrales; MS Devall; Mary Ann Fajvan; M.A. Mendoza Briseno; C.W. Mize; A. Navarro-Martinez

    2014-01-01

    Silviculture is the art, science and practice of controlling the establishment, composition, health, quality and growth of forests to accomplish a set of management objectives. This publication offers an approach to silviculture of the forests of Quintana Roo in which mahogany (Swietenia macrophylla King), the commercially most important tree...

  7. "Riigikogu hoone 90" = "Estonian parliament building 90" / Janno Roos, Andres Labi

    Index Scriptorium Estoniae

    Roos, Janno, 1976-

    2013-01-01

    Eesti Sisearhitektide Liidu 2012. aasta näituse kujunduse preemia pälvinud näitusest (Lossiplats 1A). Kujunduse autorid Janno Roos ja Andres Labi (Ruumilabor). Kuraator Mait Väljas. Graafiline disain: Identity. Sisearhitekti ja ESLi aastapreemiate žürii liikme Mari Kurismaa ning arhitektuuriajaloolase Leele Välja arvamused

  8. Scheteligi büroo- ja laohoone = Schetelig's Office Building and Warehouse / Epp Lankots

    Index Scriptorium Estoniae

    Lankots, Epp, 1976-

    2000-01-01

    Kahekorruseline, minimalistliku kastja mahuga hoone. Peafassaadi kujunduses on kasutatud firma nime. Projekteerija Arhitektibüroo J. Okas & M. Lõoke. Arhitektid Jüri Okas, Marika Lõoke. Sisekujundaja Kristiina Voolaid. Projekt 1998, valmis 2000. 7 ill. Korruste plaanid, lõige, välisvaated

  9. Rahapesu andmebüroo uurib Ühispanga juhtumit / Inno Tähismaa

    Index Scriptorium Estoniae

    Tähismaa, Inno, 1970-

    2004-01-01

    Politsei rahapesu andmebüroo juhi Arnold Tenusaare kinnitusel alustatakse Ühispanga asepresidendi Lembit Kitteriga seotud off-shore firma Patent Developments Ltd. juhtumi uurimist, kus 1997. aastal firma pangaarvelt sularaha väljavõtmisel võis olla tegemist allkirja võltsimise ja rahapesuga

  10. Eesti pangandusmaastikule on kerkimas uus rahvapank / Andro Roos ; interv. Vootele Päi

    Index Scriptorium Estoniae

    Roos, Andro, 1983-

    2008-01-01

    Tartu Ülikooli rahanduse õppejõud ja Tartu hoiu-laenuühistu juhatuse liige Andro Roos koos Erki Pisukese ja Märt Riineriga plaanivad hakata pakkuma ühistupanga teenust. Ühistupanga toimimise põhimõtted, hoiu-laenuühistud Eestis. Lisa: Panga loomine

  11. Comparison between a commercial and homemade ionization chamber for dosimetry of {sup 60}Co beams

    Energy Technology Data Exchange (ETDEWEB)

    Neves, Lucio P.; Perini, Ana P.; Caldas, Linda V.E., E-mail: lpneves@ipen.b, E-mail: aperini@ipen.b, E-mail: lcaldas@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2011-07-01

    The Calibration Laboratory at IPEN/CNEN (LCI) has developed several ionization detectors for dosimetry in diagnostic radiology, radiation protection and radiotherapy. Recently, a cylindrical ionization chamber, with a sensitive volume of 1.06cm{sup 3}, was developed, and several tests were performed to characterize this ionization chamber for radiotherapy level. The results showed that its performance was within the recommended international limits. In order to complement the studies regarding the response of this ionization chamber, in this work, the chamber response was compared with that of a commercial ionization chamber Farmer PTW, model TN30011-1. The ionization chamber produced at LCI is made of PVC and PMMA. A special build-up cap for {sup 60}Co beams was made of acrylic, with 4.00 mm thickness. All tests of both ionization chambers were performed under the same conditions, allowing good geometrical reproducibility. The performed tests were: saturation, ion collection efficiency, polarity effect and chamber tilt. The results obtained in this comparison program were all within the international recommendations, and demonstrate a good agreement of the performance of the commercial and the homemade ionization chambers. From this comparison results and from previous data, it is possible to conclude that the ionization chamber produced at IPEN presents usefulness for dosimetric applications at radiotherapy level in {sup 60}Co beams.(author)

  12. Chamber transport

    Energy Technology Data Exchange (ETDEWEB)

    OLSON,CRAIG L.

    2000-05-17

    Heavy ion beam transport through the containment chamber plays a crucial role in all heavy ion fusion (HIF) scenarios. Here, several parameters are used to characterize the operating space for HIF beams; transport modes are assessed in relation to evolving target/accelerator requirements; results of recent relevant experiments and simulations of HIF transport are summarized; and relevant instabilities are reviewed. All transport options still exist, including (1) vacuum ballistic transport, (2) neutralized ballistic transport, and (3) channel-like transport. Presently, the European HIF program favors vacuum ballistic transport, while the US HIF program favors neutralized ballistic transport with channel-like transport as an alternate approach. Further transport research is needed to clearly guide selection of the most attractive, integrated HIF system.

  13. The influence of an extrapolation chamber over the low energy X-ray beam radiation field

    Energy Technology Data Exchange (ETDEWEB)

    Tanuri de F, M. T.; Da Silva, T. A., E-mail: mttf@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear / CNEN, Av. Pte. Antonio Carlos 6627, 31270-901 Pampulha, Belo Horizonte, Minas Gerais (Brazil)

    2016-10-15

    The extrapolation chambers are detectors whose sensitive volume can be modified by changing the distance between the electrodes and has been widely used for beta particles primary measurement system. In this work, was performed a PTW 23392 extrapolation chamber Monte Carlo simulation, by mean the MCNPX code. Although the sensitive volume of an extrapolation chamber can be reduced to very small size, their packaging is large enough to modify the radiation field and change the absorbed dose measurements values. Experiments were performed to calculate correction factors for this purpose. The validation of the Monte Carlo model was done by comparing the spectra obtained with a CdTe detector according to the ISO 4037 criteria. Agreements smaller than 5% for half value layers, 10% for spectral resolution and 1% for mean energy, were found. It was verified that the correction factors are dependent of the X-ray beam quality. (Author)

  14. [Hydatid disease of the first rib treated surgically by the Roos approach].

    Science.gov (United States)

    Marghli, A; Smati, B; Abdelmalek, M; Attia, S; Djilani, H; Kilani, T

    2008-12-01

    Hydatid disease is a parasitic infection due to Echinococcus granulosus. Since involvement of the ribs and in particular the first rib is rare, diagnosis and treatment in these locations can pose special problems. The purpose of this report is to describe the case of a 27-year-old man in whom an apical left opacity was discovered by chance. Clinical examination was normal. Thoracic ultrasound demonstrated multilocular cyst in the left apical region of the thorax. Thoracic computed tomography (CT) demonstrated a hydatid cyst originating from the first rib. The patient was operated using the technique known as the Roos approach. The procedure consisted of cystectomy with resection of the first rib. The multiloculated appearance of the lesion and erosion at the first rib was consistent with hydatid cyst. The Roos approach is the technique of choice for the treatment of the first rib.

  15. Atraktiivne kontor Viljandis - Leviehituse büroo = An attractive office in Viljandi - Leviehitus's office

    Index Scriptorium Estoniae

    2007-01-01

    Viljandis Leola t. 49 asuva Leviehituse büroo sisekujundus. Sisearhitekt Tambet Pedak. Vastuvõtuleti, laedetailid, nõupidamistelauad ja köögimööbli on T. Pedaku jooniste järgi valmistanud Jaan Sild Wako Värkstoast. Sisearhitektist, tema tähtsamad tööd. Plaan, 8 värv. vaadet, foto T. Pedakust

  16. Atraktiivne kontor Viljandis - Leviehituse büroo = An attractive office in Viljandi - Leviehitus's office

    Index Scriptorium Estoniae

    2007-01-01

    Viljandis Leola t. 49 asuva Leviehituse büroo sisekujundus. Sisearhitekt Tambet Pedak. Vastuvõtuleti, laedetailid, nõupidamistelauad ja köögimööbli on T. Pedaku jooniste järgi valmistanud Jaan Sild Wako Värkstoast. Sisearhitektist, tema tähtsamad tööd. Plaan, 8 värv. vaadet, foto T. Pedakust

  17. kQ factors for ionization chamber dosimetry in clinical proton beams.

    Science.gov (United States)

    Vatnitsky, S M; Siebers, J V; Miller, D W

    1996-01-01

    We discuss a formalism for clinical proton beam dosimetry based on the use of ionization chamber absorbed dose-to-water calibration and beam quality correction factors. A quantity kQ, the beam quality correction factor, is defined which corrects the absorbed dose-to-water calibration factor ND,w in a reference beam of quality Q0 to that in a user's beam of quality Q1. This study of proton beam quality correction factors used 60Co (kQ gamma) and proton (kQp) reference beams. The kQ gamma factors were measured using combined water calorimetry and ionometry for PTW and Capintec-Farmer-type ionization chambers, and were computed from standard dosimetry protocols. Agreement between measured and calculated kQ gamma values for both chambers was found within 1.2% in the plateau region for a monoenergetic 250-MeV beam and within 1.8% at the spread-out Bragg peak for a 155-MeV range-modulated beam. Comparison of absorbed doses to water determined in the range-modulated 155-MeV beam was performed with the PTW chamber using three calibration methods: Ngas calibration (AAPM Report 16), ND,w,gamma calibration in a 60Co beam in conjunction with a kQ gamma factor, and ND,w,p calibration in a proton beam in conjunction with a kQp factor. Absorbed doses to water obtained with the three methods agreed within 2% when ionization chamber dosimetry data were analyzed using the proton W-value for air from the AAPM Report 16 and the ICRU 49 proton stopping powers. The use of the proton-calibrated reference ionization chamber, in conjunction with the beam quality correction factor kQp, significantly reduced the systematic uncertainty of the absorbed dose determination.

  18. Coupling Biophysical and Socioeconomic Models for Coral Reef Systems in Quintana Roo, Mexican Caribbean

    Directory of Open Access Journals (Sweden)

    Jessica Melbourne-Thomas

    2011-09-01

    Full Text Available Transdisciplinary approaches that consider both socioeconomic and biophysical processes are central to understanding and managing rapid change in coral reef systems worldwide. To date, there have been limited attempts to couple the two sets of processes in dynamic models for coral reefs, and these attempts are confined to reef systems in developed countries. We present an approach to coupling existing biophysical and socioeconomic models for coral reef systems in the Mexican state of Quintana Roo. The biophysical model is multiscale, using dynamic equations to capture local-scale ecological processes on individual reefs, with reefs connected at regional scales by the ocean transport of larval propagules. The agent-based socioeconomic model simulates changes in tourism, fisheries, and urbanization in the Quintana Roo region. Despite differences in the formulation and currencies of the two models, we were able to successfully modify and integrate them to synchronize and define information flows and feedbacks between them. A preliminary evaluation of the coupled model system indicates that the model gives reasonable predictions for fisheries and ecological variables and can be used to examine scenarios for future social-ecological change in Quintana Roo. We provide recommendations for where efforts might usefully be focused in future attempts to integrate models of biophysical and socioeconomic processes, based on the limitations of our coupled system.

  19. Endurance and Adaptation of Community Forest Management in Quintana Roo, Mexico

    Directory of Open Access Journals (Sweden)

    Edward A. Ellis

    2015-11-01

    Full Text Available Despite regional deforestation threats, the state of Quintana Roo has maintained over 80% of its territory in forests. Community forest management (CFM has played a pivotal role in forest cover and biodiversity conservation in the region. In this article, we present the institutional, socioeconomic and environmental conditions under which community-based forest management has been consolidated in the tropical state of Quintana Roo, which occupies the eastern half of Mexico’s Yucatan Peninsula. With a focus on management for timber and other market-based development strategies, we then examine the institutional and socioeconomic factors, as well as biophysical shocks, that have constrained community forestry development in the past 25 years, challenging its persistence. Following, we discuss how forest communities and institutions have responded and adapted to changing forest policies and markets as well as major environmental shocks from hurricanes and fires. CFM in Quintana Roo has shown resiliency since its institutionalization 30 years ago. Future challenges and opportunities include biodiversity conservation, carbon management through Reducing Emissions from Deforestation and Forest Degradation (REDD+ initiatives, market strengthening, business management training as well as the implementation of alternative silvicultural systems, particularly to manage sustainable populations of commercial timber species.

  20. SU-E-T-562: Scanned Percent Depth Dose Curve Discrepancy for Photon Beams with Physical Wedge in Place (Varian IX) Using Different Sensitive Volume Ion Chambers

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, H; Sarkar, V; Rassiah-Szegedi, P; Huang, Y; Szegedi, M; Huang, L; Salter, B [University Utah, Salt Lake City, UT (United States)

    2014-06-01

    Purpose: To investigate and report the discrepancy of scanned percent depth dose (PDD) for photon beams with physical wedge in place when using ion chambers with different sensitive volumes. Methods/Materials: PDD curves of open fields and physical wedged fields (15, 30, 45, and 60 degree wedge) were scanned for photon beams (6MV and 10MV, Varian iX) with field size of 5x5 and 10x10 cm using three common scanning chambers with different sensitive volumes - PTW30013 (0.6cm3), PTW23323 (0.1cm3) and Exradin A16 (0.007cm3). The scanning system software used was OmniPro version 6.2, and the scanning water tank was the Scanditronix Wellhoffer RFA 300.The PDD curves from the three chambers were compared. Results: Scanned PDD curves of the same energy beams for open fields were almost identical between three chambers, but the wedged fields showed non-trivial differences. The largest differences were observed between chamber PTW30013 and Exradin A16. The differences increased as physical wedge angle increased. The differences also increased with depth, and were more pronounced for 6MV beam. Similar patterns were shown for both 5x5 and 10x10 cm field sizes. For open fields, all PDD values agreed with each other within 1% at 10cm depth and within 1.62% at 20 cm depth. For wedged fields, the difference of PDD values between PTW30013 and A16 reached 4.09% at 10cm depth, and 5.97% at 20 cm depth for 6MV with 60 degree physical wedge. Conclusion: We observed a significant difference in scanned PDD curves of photon beams with physical wedge in place obtained when using different sensitive volume ion chambers. The PDD curves scanned with the smallest sensitive volume ion chamber showed significant difference from larger chamber results, beyond 10cm depth. We believe this to be caused by varying response to beam hardening by the wedges.

  1. Relative dosimetry of photon beam of 6 MV with a liquid ionization chamber; Dosimetria relativa de un haz de fotones de 6 MV con una camara de ionizacion liquida

    Energy Technology Data Exchange (ETDEWEB)

    Benitez Villegas, E. M.; Casado Villalon, F. J.; Martin-Cueto, J. A.; Caudepon Moreno, F.; Garcia Pareja, S.; Galan Montenegro, P.

    2011-07-01

    The increasing use of reduced size fields in the special techniques of treatment generates regions with high dose gradients. It therefore requires the use of detectors that present high spatial resolution. The aim of this study is to compare the dosimetric measurements obtained with a liquid ionization chamber PTW MicroLion recently acquired with other commonly used detectors for a photon beam of 6 MV linear electron accelerator Varian 600DBX.

  2. Doriot Climatic Chambers

    Data.gov (United States)

    Federal Laboratory Consortium — The Doriot Climatic Chambers are two, 60-feet long, 11-feet high, 15-feet wide chambers that are owned and operated by NSRDEC. The Doriot Climatic Chambers are among...

  3. Palaemonidae (Crustacea: Decapoda: Caridea from the shallow waters from Quintana Roo, Mexican Caribbean coast Palaemonidae (Crustacea: Decapoda: Caridea de las aguas someras de Quintana Roo, Caribe mexicano

    Directory of Open Access Journals (Sweden)

    Ramiro Román-Contreras

    2010-04-01

    Full Text Available Few studies have focused on the palaemonid fauna of the Mexican Caribbean. This study provides a list of shallow water free-living and symbiont shrimps of the family Palaemonidae collected on turtle grass (Thalassia testudinum in Bahía de la Ascensión, Bahía del Espíritu Santo and Mahahual reef lagoon, Quintana Roo, Mexico. Ten species in 8 genera are reported, of which the genus Periclimenes is the most diverse with 3 species. An updated geographic distribution along the western Atlantic and other regions is provided for all the species. The greatest affinity of the palaemonid fauna studied, besides that with the Caribbean province, is with the Brazilian, Argentinian, and Texan zoogeographic provinces. Of the 10 species reported in this paper, 8 represent new local records in the studied area.Los crustáceos de la familia Palaemonidae del Caribe mexicano han sido poco estudiados. En este trabajo se presenta un listado de palemónidos de vida libre y simbiontes recolectados en el pasto marino Thalassia testudiuim de Bahía de la Ascensión, Bahía del Espíritu Santo y la laguna arrecifal de Mahahual, Quintana Roo, México. Se registran 10 especies pertenecientes a 8 géneros, siendo el género Periclimenes el más diverso con 3 especies. Para todas las especies se proporciona su distribución geográfica en la costa del Atlántico americano así como en otras regiones. Además de la provincia Caribeña, los palemónidos recolectados también muestran alta afinidad con otras provincias zoogeográficas como la Brasileña, Argentina y Texana; de las 10 especies registradas en este estudio, 8 representan nuevo registro local en el área estudiada.

  4. Directed Energy Anechoic Chamber

    Data.gov (United States)

    Federal Laboratory Consortium — The Directed Energy Anechoic Chamber comprises a power anechoic chamber and one transverse electromagnetic cell for characterizing radiofrequency (RF) responses of...

  5. Verification of absorbed dose rates in reference beta radiation fields: Measurements with an extrapolation chamber and radiochromic film.

    Science.gov (United States)

    Reynaldo, S R; Benavente, J A; Da Silva, T A

    2016-11-01

    Beta Secondary Standard 2 (BSS 2) provides beta radiation fields with certified values of absorbed dose to tissue and the derived operational radiation protection quantities. As part of the quality assurance, the reliability of the CDTN BSS2 system was verified through measurements in the (90)Sr/(90)Y and (85)Kr beta radiation fields. Absorbed dose rates and their angular variation were measured with a 23392 model PTW extrapolation chamber and with Gafchromic radiochromic films on a PMMA slab phantom. The feasibility of using both methods was analyzed.

  6. Inseguridad y turismo en Quintana Roo, México (1997-2013)

    OpenAIRE

    Maribel Lozano Cortés

    2016-01-01

    El objetivo es determinar si el turismo en Quintana Roo se ve afectado por el incremento de los delitos, y demostrarlo mediante un modelo econométrico. Para este se retoman las variables de los delitos del fuero federal, por considerar que son los que más impactan en la percepción de inseguridad, y la ocupación hotelera. En los resultados del modelo se observa que la relación entre los delitos del fuero federal y el turismo es inversa, es decir, cuando se incrementan los delitos, el número de...

  7. Inseguridad y turismo en Quintana Roo, México (1997-2013

    Directory of Open Access Journals (Sweden)

    Maribel Lozano Cortés

    2016-04-01

    Full Text Available El objetivo es determinar si el turismo en Quintana Roo se ve afectado por el incremento de los delitos, y demostrarlo mediante un modelo econométrico. Para este se retoman las variables de los delitos del fuero federal, por considerar que son los que más impactan en la percepción de inseguridad, y la ocupación hotelera. En los resultados del modelo se observa que la relación entre los delitos del fuero federal y el turismo es inversa, es decir, cuando se incrementan los delitos, el número de turistas disminuye; sin embargo, el efecto de la delincuencia está en función de la percepción, y, por lo tanto, resolvimos que este efecto puede lograrse rezagando la variable explicativa, por lo que se retardó a un periodo, es decir, la inseguridad o el temor se presenta con rezago de un año. Por esto, se concluye que al aumentar los delitos del fuero federal en el Estado de Quintana Roo, disminuye, para el siguiente año, la densidad hotelera en la entidad; en términos absolutos, son menos turistas pernoctando en la infraestructura hotelera del Estado.

  8. DIGITAL PRESERVATION OF ANCIENT MAYA CAVE ARCHITECTURE: RECENT FIELD EFFORTS IN QUINTANA ROO, MEXICO

    Directory of Open Access Journals (Sweden)

    D. Rissolo

    2017-08-01

    Full Text Available The presence of ancient Maya shrines in caves serves as unequivocal evidence for the ritual appropriation of these subterranean spaces and their significance with respect to Maya religious practice. Detailed study of the miniature masonry temples and altar features in the caves of Quintana Roo, Mexico reveals a strong stylistic and likely functional correspondence between these structures and their terrestrial counterparts at Postclassic sites. The Proyecto Arquitectura Subterranea de Quintana Roo (coordinated by the Center of Interdisciplinary Science for Art, Architecture, and Archaeology, or CISA3, at the University of California, San Diego and in collaboration with the Instituto Nacional de Antropologia e Historia in Mexico is conducting a survey and program of digital documentation of both the pristine and impacted cave shrines of the region. Once an area is developed and populated, and access is opened to caves containing ancient architectural features, they are soon vandalized – often resulting in the complete obliteration of these rare miniature buildings and their diagnostic architectural elements. This emergent situation necessitates the use of rapid reality-capture tools; however, the physical challenges of working in caves requires researchers of adapt increasingly common architectural documentation methodologies to more adverse field conditions.

  9. Digital Preservation of Ancient Maya Cave Architecture: Recent Field Efforts in Quintana Roo, Mexico

    Science.gov (United States)

    Rissolo, D.; Lo, E.; Hess, M. R.; Meyer, D. E.; Amador, F. E.

    2017-08-01

    The presence of ancient Maya shrines in caves serves as unequivocal evidence for the ritual appropriation of these subterranean spaces and their significance with respect to Maya religious practice. Detailed study of the miniature masonry temples and altar features in the caves of Quintana Roo, Mexico reveals a strong stylistic and likely functional correspondence between these structures and their terrestrial counterparts at Postclassic sites. The Proyecto Arquitectura Subterranea de Quintana Roo (coordinated by the Center of Interdisciplinary Science for Art, Architecture, and Archaeology, or CISA3, at the University of California, San Diego and in collaboration with the Instituto Nacional de Antropologia e Historia in Mexico) is conducting a survey and program of digital documentation of both the pristine and impacted cave shrines of the region. Once an area is developed and populated, and access is opened to caves containing ancient architectural features, they are soon vandalized - often resulting in the complete obliteration of these rare miniature buildings and their diagnostic architectural elements. This emergent situation necessitates the use of rapid reality-capture tools; however, the physical challenges of working in caves requires researchers of adapt increasingly common architectural documentation methodologies to more adverse field conditions.

  10. INDICADORES DE DESARROLLO LOCAL PARA EL TURISMO RURAL DE QUINTANA ROO, MÉXICO

    Directory of Open Access Journals (Sweden)

    Alejandro Palafox Muñoz

    2011-11-01

    Full Text Available Resumo: O desenvolvimento da atividade turística, no México, tem sido impulsionado no sentido de  satisfazer às necessidades de segmentos de mercado associados aos atrativos naturais da costa, visando principalmente ao turismo de sol e mar e aos cruzeiros. O impulso dessa atividade econômica gerou uma série de impactos positivos e negativos nas localidades onde se apresenta como principal atividade econômica. Nesse sentido, os Programas Nacionais de Turismo registram como resultado do impulso do turismo, um desenvovimento regional equilibrado e sustentável dos recursos e comunidades, ao contrário do beneficio endêmico que se cria principalmente nos Centros Integralmente Planejados  e Megaprojetos Turísticos (Cancún, Huatulco, Los Cabos, Loreto e Ixtapa, Costa Maya, Riviera Maya, Nayarit, Barrancas del Cobre, Palenque, y la Escalera Náutica, caracterizados por cinturões de miséria e esgotamento de recursos. Algumas comunidades rurais do estado de Quintana Roo têm conseguido alcançar certo desenvolvimento local, daí a importância de implementar um sistema de indicadores de desenvolvimento local que crie informações para a tomada de decisão nos âmbitos soci, ambiental e económico. Palavras-chave: Turismo; Desenvolvimento Local; Indicadores; Quintana Roo.

  11. Technical Note: Influence of Compton currents on profile measurements in small-volume ion chambers

    Energy Technology Data Exchange (ETDEWEB)

    Tanny, Sean; Sperling, Nicholas; Parsai, E. Ishmael, E-mail: e.parsai@utoledo.edu [Department of Radiation Oncology, University of Toledo Medical Center, 1325 Conference Drive, Toledo, Ohio 43614 (United States); Holmes, Shannon [Standard Imaging, 3120 Deming Way, Middleton, Wisconsin 53562 (United States)

    2015-10-15

    Purpose: This work is to evaluate the effects of Compton current generation in three small-volume ionization chambers on measured beam characteristics for electron fields. Methods: Beam scans were performed using Exradin A16, A26, and PTW 31014 microchambers. Scans with varying chamber components shielded were performed. Static point measurements, output factors, and cable only irradiations were performed to determine the contribution of Compton currents to various components of the chamber. Monte Carlo simulations were performed to evaluate why one microchamber showed a significant reduction in Compton current generation. Results: Beam profiles demonstrated significant distortion for two of the three chambers when scanned parallel to the chamber axis, produced by electron deposition within the wire. Measurements of ionization produced within the cable identified Compton current generation as the cause of these distortions. The size of the central collecting wire was found to have the greatest influence on the magnitude of Compton current generation. Conclusions: Microchambers can demonstrate significant (>5%) deviations from properties as measured with larger volume chambers (0.125 cm{sup 3} and above). These deviations can be substantially reduced by averaging measurements conducted at opposite polarities.

  12. Characterization of the Camera with accommodation PTW source check Valencia for verification of sources of I-125; Caracterizacion de la camara PTW sourcecheck con el alojamiento Valencia para la verificacion de fuentes de I-125

    Energy Technology Data Exchange (ETDEWEB)

    Tornero Lopez, A. M.; Torres del Rio, J.; Ruiz, C.; Perez Calatayud, J.; Guirado, D.; Lallena, A. M.

    2015-07-01

    In this paper we analyze the dependence when the housing is used Valencia. The evaluation of uncertainties and verification of the approach required to obtain a calibration factor for accommodation Valencia, are made using the Monte Carlo method. In determining the response profile of the camera, the effect of the variability between experiments is more important than the uncertainty associated with the measurement at each position within a particular experiment. The dependence of the response of the chamber with air density is independent of the geometry measurement and accommodation. (Author)

  13. Super-resolution non-parametric deconvolution in modelling the radial response function of a parallel plate ionization chamber.

    Science.gov (United States)

    Kulmala, A; Tenhunen, M

    2012-11-07

    The signal of the dosimetric detector is generally dependent on the shape and size of the sensitive volume of the detector. In order to optimize the performance of the detector and reliability of the output signal the effect of the detector size should be corrected or, at least, taken into account. The response of the detector can be modelled using the convolution theorem that connects the system input (actual dose), output (measured result) and the effect of the detector (response function) by a linear convolution operator. We have developed the super-resolution and non-parametric deconvolution method for determination of the cylinder symmetric ionization chamber radial response function. We have demonstrated that the presented deconvolution method is able to determine the radial response for the Roos parallel plate ionization chamber with a better than 0.5 mm correspondence with the physical measures of the chamber. In addition, the performance of the method was proved by the excellent agreement between the output factors of the stereotactic conical collimators (4-20 mm diameter) measured by the Roos chamber, where the detector size is larger than the measured field, and the reference detector (diode). The presented deconvolution method has a potential in providing reference data for more accurate physical models of the ionization chamber as well as for improving and enhancing the performance of the detectors in specific dosimetric problems.

  14. Roos on roos / Mart Sander

    Index Scriptorium Estoniae

    Sander, Mart, 1967-

    1999-01-01

    Luigi Pirandello "Täna õhtul improviseerime", lavastaja Jaanus Rohumaa, kunstnik Mae Kivilo. Esitavad EMA Kõrgema Lavakunstikooli 19. lennu üliõpilased. Esietendus 11. dets. Tallinna Linnateatris

  15. Positioning of a plane-parallel ionization chamber in clinical electron beams and the impact on perturbation factors

    Energy Technology Data Exchange (ETDEWEB)

    Zink, K; Wulff, J [Institut fuer Medizinische Physik und Strahlenschutz-IMPS, University of Applied Sciences Giessen-Friedberg, Wiesenstr. 14, D-35390 Giessen (Germany)], E-mail: klemens.zink@tg.fh-giessen.de

    2009-04-21

    Current dosimetry protocols recommend the use of plane-parallel ionization chambers for the dosimetry of clinical electron beams. The necessary perturbation corrections p{sub wall} and p{sub cav} are assumed to be unity, independent of the depth of measurement and the energy of the primary electrons. To verify these assumptions detailed Monte Carlo studies of a Roos chamber in clinical electron beams with energies in the range of 6-21 MeV are performed at different depths in water and analyzed in terms of Spencer-Attix cavity theory. Separate simulations for the perturbation corrections p{sub wall} and p{sub cav} indicate quite different properties of both correction factors with depth. Dose as well as fluence calculations show a nearly depth-independent wall correction factor for a shift of the Roos chamber {delta}z = -0.017 cm toward the focus. This value is in good agreement with the positioning recommendation given in all dosimetry protocols. Regarding the fluence perturbation p{sub cav} the simulation of the electron fluence inside the air cavity in comparison to water unambiguously reveals an in-scattering of low energy electrons, despite the fact, that the cavity is 'well guarded'. For depths beyond the reference depth z{sub ref} this effect is superimposed by an increased loss of primary electrons from the beam resulting in p{sub cav} > 1. This effect is largest for low electron energies but present for all electron energies involved in this study. Based on the different depth dependences of p{sub wall} and p{sub cav} it is possible to choose a chamber shift {delta}z in a way to minimize the depth dependence of the overall perturbation factor p. For the Roos chamber this shift is {delta}z = -0.04 cm independent of electron energy.

  16. Positioning of a plane-parallel ionization chamber in clinical electron beams and the impact on perturbation factors.

    Science.gov (United States)

    Zink, K; Wulff, J

    2009-04-21

    Current dosimetry protocols recommend the use of plane-parallel ionization chambers for the dosimetry of clinical electron beams. The necessary perturbation corrections p(wall) and p(cav) are assumed to be unity, independent of the depth of measurement and the energy of the primary electrons. To verify these assumptions detailed Monte Carlo studies of a Roos chamber in clinical electron beams with energies in the range of 6-21 MeV are performed at different depths in water and analyzed in terms of Spencer-Attix cavity theory. Separate simulations for the perturbation corrections p(wall) and p(cav) indicate quite different properties of both correction factors with depth. Dose as well as fluence calculations show a nearly depth-independent wall correction factor for a shift of the Roos chamber Deltaz = -0.017 cm toward the focus. This value is in good agreement with the positioning recommendation given in all dosimetry protocols. Regarding the fluence perturbation p(cav) the simulation of the electron fluence inside the air cavity in comparison to water unambiguously reveals an in-scattering of low energy electrons, despite the fact, that the cavity is 'well guarded'. For depths beyond the reference depth z(ref) this effect is superimposed by an increased loss of primary electrons from the beam resulting in p(cav) > 1. This effect is largest for low electron energies but present for all electron energies involved in this study. Based on the different depth dependences of p(wall) and p(cav) it is possible to choose a chamber shift Deltaz in a way to minimize the depth dependence of the overall perturbation factor p. For the Roos chamber this shift is Deltaz = -0.04 cm independent of electron energy.

  17. RMK büroohoone = State Forest Management Centre office building / Arhitektuuribüroo Studio-3

    Index Scriptorium Estoniae

    2013-01-01

    Riigimetsa Majandamise Keskuse bürooruumide (Toompuiestee 24, Tallinn) sisekujundusest. Autorid: Reet Põime, Liisa Põime, Anu Põime, Andres Põime, Kristi Prinzmann, Lauri Kalm, Lauri Vaimel (Studio-3). Arhitekt Ott Kadariku arvamus. Arhitektuuribüroo Studio-3 lühitutvustus

  18. Inseneribüroo pakub ohtlikele linna vöötradadele uut nägu / Piret Peensoo

    Index Scriptorium Estoniae

    Peensoo, Piret

    2004-01-01

    Maanteeameti ekspertide töörühm tunnistas Tallinna kõige ohtlikumateks vöötradadeks Kaarli puiestee, Tõnismäe tänava ja Kosmose kino ülekäigurajad. Lisad: Liiklusuuring soovitab linnakiiruseks 40; Mida tuleb inseneribüroo Stratum hinnangul ruttu teha

  19. RMK büroohoone = State Forest Management Centre office building / Arhitektuuribüroo Studio-3

    Index Scriptorium Estoniae

    2013-01-01

    Riigimetsa Majandamise Keskuse bürooruumide (Toompuiestee 24, Tallinn) sisekujundusest. Autorid: Reet Põime, Liisa Põime, Anu Põime, Andres Põime, Kristi Prinzmann, Lauri Kalm, Lauri Vaimel (Studio-3). Arhitekt Ott Kadariku arvamus. Arhitektuuribüroo Studio-3 lühitutvustus

  20. roo täis metsahõngu / Ell-Maaja Randküla

    Index Scriptorium Estoniae

    Randküla, Ell-Maaja, 1939-2016

    2005-01-01

    OÜ Loo Grupp büroo Tallinnas Peterburi mnt. 44. Sisekujundus: Jan Skolimowski, Arhitektuuristuudio Siim & Kreis. Ehitajad: AS Harju Ehitus ja OÜ Loo Grupp. Arhitekt Jan Skolimowskist, tema tähtsamad tööd. Ill.: plaan, 10 värv. vaadet

  1. ISR Intersection Vacuum Chamber

    CERN Multimedia

    1975-01-01

    This special vacuum chamber presenting a lateral opening at the beam crossing point is one of the many chambers specifically designed for a particular experiment. Here it is shown during assembly at the ISR mechanical worshop.

  2. Program analysis and presentation of results of the profiles and depth dose rates obtained with the PTW software MC{sub 2} MEPHYSTO; Programa de analisis y presentacion de resultados de los perfiles y porcentajes de dosis en profundidad adquiridos con el software MEPHYSTO MC2 de PTW

    Energy Technology Data Exchange (ETDEWEB)

    Tato de la Cuevas, F.

    2011-07-01

    In the periodic quality control of linear accelerators is usually included acquisition and analysis of profiles and PDDs (percentage depth dose). In the protocol of Quality Control of electron accelerators for clinical use of the proposed analysis SEFM 4 Profiles for each of the energies used clinically. This involves a large number of curves to be analyzed and the subsequent introduction of the parameters in a spreadsheet or similar for your assessment as to the reference state. We have developed a program that analyzes the curves acquired by mcc Mephysto PTW software and presents the results of that analysis in a spreadsheet.

  3. SU-E-T-634: Pre-Verification of FFF Prostate VMAT Plans with Gamma Method and DVHs Reconstructed Based On Measurements with 2D-ARRAY (PTW 1500) and OCTAVIUS 4D

    Energy Technology Data Exchange (ETDEWEB)

    Kruszyna, M; Adamczyk, M

    2015-06-15

    Purpose: The aim of this work was to characterize the clinical correctness of FFF prostate treatment VMAT plans based on analysis of DVHs reconstructed from pre-verification 2D-arrays measurements. Methods: The new 2D ion chamber array 1500 with rotational phantom cylindrical Octavius 4D and Verisoft 6.1 software with DVH option (PTW, Freiburg) were used to determine the clinical usefulness of the treatment plans. Ten patients treated with VMAT high-fractionated (2 fraction x 7,5 Gy) FFF prostate plans (TrueBeam, Varian) were analyzed using the 3D gamma analysis by local dose method with a 5% threshold for various tolerance parameters DTA [mm] and DD [%] were 1%/1, 2%/2, 3%/3. Additional, based on the measurements of irradiation dose distributions and patients’ CT scans with contoured structures of organs, the DVHs were reconstructed using a software. The obtained DVHs were compared to planned dose distributions and the deviations were analysed with parameters: for CTV D50, D98, D2, and D25, D50, Dmax for OARs — rectum, bladder and left/right femoral heads. Results: The analyzed treatment plans passed gamma criteria (3/3%; 95%), the results obtained were as follow: mean value and standard deviation of gamma score for criteria (DTA[mm]/DD[%]): 1/1% (L53.3±3.2); 2/2% (L87.0±2.2); 3/3% (L97.5±0.9). In the DVH analysis, the highest differences were observed for OARs (especially for bladder): the mean percentage differences values for rectum, bladder and left/right femoral heads were: D25 (1.67; 6.83)%, D50 (0.18; 7.18; 1.53; 0.30)%, Dmax (−0.84; −1.64; 0.37; −4.63)%, respectively. For the CTV mean relative deviations for proper parameters were in good agreement with TPS: D98 (0.95±2.21)%, D50 (1.93±0.67)%, D2 (1.76±0.76)%. Conclusion: The gamma method is recommended tool for pre-verification analysis of correctness of treatment plans. Moreover, the scrutiny checking with reconstructed DVH gives additional, clinical information about quality of plan

  4. [Abundance and body size of Menippe mercenaria (Crustacea: Brachyura), in artificial refuges in Quintana Roo, Mexico].

    Science.gov (United States)

    Cervantes-Martínez, A; Ramírez-González, A

    2001-01-01

    In Florida and Cuba the stone crab Menippe mercenaria (Say, 1818) is under strong fishing-pressure; nevertheless in the Mexican Caribbean it is considered as sub-utilized and poorly known resource. Artificial shelters ("condominios cubanos") were used to study relative abundance, age structure, claw length-carapace amplitude relation, and population in three seasons and four sectors at Bahía Ascension, Quintana Roo, Mexico. The abundance varied according to the sector and sampling season: population was higher in the south and during the north wind ("Nortes") season (January to March). The carapace amplitude was directly proportional to claw length (r2 = 0.83, 0.97 and 0.89; p < 0.05 in females, males and total, respectively). The results suggest that specimens with 37.5 and 67.5 mm of carapace amplitude are the most limited regarding refuge availability in the Bay.

  5. Mu ema must roos : [luuletused] / S{u00E1ndor Cso̤ri

    Index Scriptorium Estoniae

    Cso̤ri, S{u00E1ndor

    2004-01-01

    Sisu: Mu ema must roos ; Viinamägi, enne sõda ; Su lauba hämarusest ; Cantata profana ; Kolmandal päeval hakkas sadama lund ; Ema jutt ; Lume mälestus ; Lampide ja rusikate ette ; Kümnes õhtu ; Jutustab koit ; Oleksid kehv taevaelanik ; Päikesevalgus ja must öine põldmari ; Kiri põhjast ; Öösel koputab moon ; Keegi su sõber ; Rajan endale teed ; Ülestunnistus Linnale ; Lesknaised tantsivad ; Värvimata jäänud silmalaugude eleegia ; 1956. aasta novembri mälestuseks ; Vihane tund ; Sel ajal jaanuaris. Eluloolisi andmeid autori kohta lk. 389-391

  6.   Diversity and composition of palm communities (Arecaceae) in Quintana Roo Mexico

    DEFF Research Database (Denmark)

    Alvarado, Arturo A.; Calvo, Luz M.; Duno, Rodrigo

    % were adults. As expected, the Shannon index confirmed that the southern evergreen forest was the most diverse. Because the Yucatan Peninsula has been recognized as biotic province, and palms have ecological and economic importance, our results could be relevant for conservation and contribute......  We compared composition and diversity of palm (Arecaceae) communities in three forest types along a gradient from dry deciduous, over intermediate to wet evergreen forest in Quintana Roo, Mexico. In forty-nine 5×500-m transects, we counted 52,612 individuals representing 14 species in 11 genera....... Within the 49 transects we found monodominance in six. The most abundant palms were Cryosophila stauracantha, Thrinax radiata and Coccothrinax readii and the least abundant were Bactris major and Gaussia maya. Thrinax radiata was the most abundant species in the northern deciduous and central...

  7. Preliminary Geochemical and Rock Magnetic Study of a Stalagmite From Quintana Roo, Northeastern Yucatan Peninsula

    Science.gov (United States)

    Urrutia-Fucugauchi, J.; Perez-Cruz, L.; Zhao, X.; Rebolledo-Vieyra, M.; Rodriguez, A.

    2012-04-01

    We present the preliminary results of geochemical, stable isotopes and rock magnetic studies of a stalagmite from a cave in eastern Quintana Roo, northern Yucatan peninsula. In the past years, there has been increased interest in understanding the paleoclimatic and paleoenvironmental evolution of the Yucatan peninsula and northern Central America, investigating the relationships between climate variations and the development of the Maya civilization. In particular, the variations in regional precipitation and occurrence of several drought periods, which might have been related to the collapse of the Classic Maya period. Stable isotope data on speleothems from different sites in Yucatan and Central America have provided evidence on changes in precipitation, which have affected the Maya region. The stalagmite is ~47 cm long and about 4-5 cm wide at its base. It was collected from the Hilariós Well cave in Tulum, Quintana Roo. Magnetic susceptibility and geochemical analyses have been completed as part of the initial characterization of the stalagmite, with measurements taken every centimeter. Geochemical analyses have been carried out for x-ray fluorescence, with a Niton XRF analyzer. Magnetic susceptibility was determined with a Bartington MS2 instrument using the high resolution surface probe. Additional rock magnetic analyses include magnetic hysteresis loops and isothermal remanent magnetization (IRM) acquisition, and saturation IRM demagnetization, which have been measured with a MicroMag instrument. Hysteresis loops are diamagnetic, with small varying low-coercivity ferromagnetic components. The elemental compositions of major oxides and trace elements vary with depth. Calcium is the major element and displays a pattern of small amplitude fluctuations with a trend to lower values at the bottom, which are also shown in other elements such as barium. Silica and elements such as titanium and strontium are positively correlated and show an apparent cyclic pattern

  8. Comparison and uncertainty evaluation of different calibration protocols and ionization chambers for low-energy surface brachytherapy dosimetry

    Energy Technology Data Exchange (ETDEWEB)

    Candela-Juan, C., E-mail: ccanjuan@gmail.com [Radiation Oncology Department, La Fe University and Polytechnic Hospital, Valencia 46026 (Spain); Vijande, J. [Department of Atomic, Molecular, and Nuclear Physics, University of Valencia, Burjassot 46100, Spain and Instituto de Física Corpuscular (UV-CSIC), Paterna 46980 (Spain); García-Martínez, T. [Radiation Oncology Department, Hospital La Ribera, Alzira 46600 (Spain); Niatsetski, Y.; Nauta, G.; Schuurman, J. [Elekta Brachytherapy, Veenendaal 3905 TH (Netherlands); Ouhib, Z. [Radiation Oncology Department, Lynn Regional Cancer Center, Boca Raton Community Hospital, Boca Raton, Florida 33486 (United States); Ballester, F. [Department of Atomic, Molecular, and Nuclear Physics, University of Valencia, Burjassot 46100 (Spain); Perez-Calatayud, J. [Radiation Oncology Department, La Fe University and Polytechnic Hospital, Valencia 46026, Spain and Department of Radiotherapy, Clínica Benidorm, Benidorm 03501 (Spain)

    2015-08-15

    Purpose: A surface electronic brachytherapy (EBT) device is in fact an x-ray source collimated with specific applicators. Low-energy (<100 kVp) x-ray beam dosimetry faces several challenges that need to be addressed. A number of calibration protocols have been published for x-ray beam dosimetry. The media in which measurements are performed are the fundamental difference between them. The aim of this study was to evaluate the surface dose rate of a low-energy x-ray source with small field applicators using different calibration standards and different small-volume ionization chambers, comparing the values and uncertainties of each methodology. Methods: The surface dose rate of the EBT unit Esteya (Elekta Brachytherapy, The Netherlands), a 69.5 kVp x-ray source with applicators of 10, 15, 20, 25, and 30 mm diameter, was evaluated using the AAPM TG-61 (based on air kerma) and International Atomic Energy Agency (IAEA) TRS-398 (based on absorbed dose to water) dosimetry protocols for low-energy photon beams. A plane parallel T34013 ionization chamber (PTW Freiburg, Germany) calibrated in terms of both absorbed dose to water and air kerma was used to compare the two dosimetry protocols. Another PTW chamber of the same model was used to evaluate the reproducibility between these chambers. Measurements were also performed with two different Exradin A20 (Standard Imaging, Inc., Middleton, WI) chambers calibrated in terms of air kerma. Results: Differences between surface dose rates measured in air and in water using the T34013 chamber range from 1.6% to 3.3%. No field size dependence has been observed. Differences are below 3.7% when measurements with the A20 and the T34013 chambers calibrated in air are compared. Estimated uncertainty (with coverage factor k = 1) for the T34013 chamber calibrated in water is 2.2%–2.4%, whereas it increases to 2.5% and 2.7% for the A20 and T34013 chambers calibrated in air, respectively. The output factors, measured with the PTW chambers

  9. Streamer chamber: pion decay

    CERN Multimedia

    1992-01-01

    The real particles produced in the decay of a positive pion can be seen in this image from a streamer chamber. Streamer chambers consist of a gas chamber through which a strong pulsed electric field is passed, creating sparks as a charged particle passes through it. A magnetic field is added to cause the decay products to follow curved paths so that their charge and momentum can be measured.

  10. Prototype multiwire proportional chamber

    CERN Multimedia

    1975-01-01

    Chambers of this type were initially developed within the Alpha project (finally not approved). They were designed such to minimize the radiation length with a view to a mass spectrometer of high resolution meant to replace the Omega detector. The chambers were clearly forerunners for the (drift) chambers later built for R606 with the novel technique of crimping the wires. See also photo 7510039X.

  11. Electromagnetic reverberation chambers

    CERN Document Server

    Besnier, Philippe

    2013-01-01

    Dedicated to a complete presentation on all aspects of reverberation chambers, this book provides the physical principles behind these test systems in a very progressive manner. The detailed panorama of parameters governing the operation of electromagnetic reverberation chambers details various applications such as radiated immunity, emissivity, and shielding efficiency experiments.In addition, the reader is provided with the elements of electromagnetic theory and statistics required to take full advantage of the basic operational rules of reverberation chambers, including calibration proc

  12. Refrigeration Test Chamber

    Data.gov (United States)

    Federal Laboratory Consortium — The enclosed and environmentally controlled chamber is able to test four units (single-phase) simultaneously at conditions ranging from tundra to desert temperatures...

  13. DORIOT CLIMATIC CHAMBERS

    Data.gov (United States)

    Federal Laboratory Consortium — The Doriot Climatic Chambers reproduce environmental conditions occurring anywhere around the world. They provide an invaluable service by significantly reducing the...

  14. Development and characterization of a graphite-walled ionization chamber as a reference dosimeter for 60Co beams

    Science.gov (United States)

    Perini, Ana P.; Neves, Lucio P.; Caldas, Linda V. E.

    2014-11-01

    A graphite-walled ionization chamber with a sensitive volume of 6.4 cm3 was developed at the Calibration Laboratory of IPEN (LCI) to determine the air kerma rate of a 60Co source. This new prototype was developed to be a simple chamber, without significant nongraphite components and with a simple set-up, which allows the determination of its various required correction factors by Monte Carlo simulations. This new ionization chamber was characterized according to the IEC 60731 standard, and all results were obtained within its limits. Furthermore, Monte Carlo simulations were undertaken to obtain the correction factors involved with the air kerma determination. The air kerma rate obtained with the graphite-walled ionization chamber was compared with that from the reference dosimeter at the LCI, a PTW ionization chamber (model TN30002). The results obtained showed good agreement within the statistical uncertainties. A graphite ionization chamber was assembled and characterized as a reference dosimeter. The characterization test results were within recommended limits. Monte Carlo simulations were undertaken to obtain the correction factors. The air kerma rate of a 60Co source was obtained with satisfactory results.

  15. Concepciones culturales, género y migración entre mayas yucatecos en Cancún, Quintana Roo

    OpenAIRE

    Adriana Leona Rosales Mendoza

    2009-01-01

    Este artículo presenta algunos elementos que contribuyen a mantener la memoria cultural en mayas peninsulares inmigrantes en Cancún, Quintana Roo. Refiero algunas concepciones culturales (rituales, leyendas y concepciones) que permiten a inmigrantes de esta etnia continuar reproduciendo y perpetuando su sentido de pertenencia étnica en ese polo turístico. Los testimonios que se presentan corresponden a cinco entrevistas efectuadas con mujeres procedentes del oriente del estado de Yucatán (X-C...

  16. DELPHI time projection chamber

    CERN Multimedia

    1989-01-01

    The time projection chamber is inserted inside the central detector of the DELPHI experiment. Gas is ionised in the chamber as a charged particle passes through, producing an electric signal from which the path of the particle can be found. DELPHI, which ran from 1989 to 2000 on the LEP accelerator, was primarily concerned with particle identification.

  17. Fluidized bed combustion chamber

    Energy Technology Data Exchange (ETDEWEB)

    Kullendorff, A.; Wikner, J.

    1985-03-25

    The chamber is confined in a pressure vessel. The lower part of the chamber has tilted parallel gutters up to the height of the fluidized bed. The slope of the gutter walls is 5 degrees-15 degrees and the top area of the gutters is 1.3 to 3 times larger than their bottom.

  18. Target chambers for gammashpere

    Energy Technology Data Exchange (ETDEWEB)

    Carpenter, M.P.; Falout, J.W.; Nardi, B.G. [and others

    1995-08-01

    One of our responsibilities for Gammasphere, was designing and constructing two target chambers and associated beamlines to be used with the spectrometer. The first chamber was used with the early implementation phase of Gammasphere, and consisted of two spun-Al hemispheres welded together giving a wall thickness of 0.063 inches and a diameter of 12 inches.

  19. Climatic chamber ergometer

    CSIR Research Space (South Africa)

    Atkins, AR

    1968-01-01

    Full Text Available The design and calibration of an ergometer for exercising subjects during calorimetric studies in the climate chamber, are described. The ergometer is built into the climatic chamber and forms an integral part of the whole instrumentation system foe...

  20. BEBC bubble chamber

    CERN Multimedia

    1972-01-01

    Looking up into the interior of BEBC bubble chamber from the expansion cylinder. At the top of the chamber two fish-eye lenses are installed and three other fish-eye ports are blanked off. In the centre is a heat exchanger.

  1. The Mobile Chamber

    Science.gov (United States)

    Scharfstein, Gregory; Cox, Russell

    2012-01-01

    A document discusses a simulation chamber that represents a shift from the thermal-vacuum chamber stereotype. This innovation, currently in development, combines the capabilities of space simulation chambers, the user-friendliness of modern-day electronics, and the modularity of plug-and-play computing. The Mobile Chamber is a customized test chamber that can be deployed with great ease, and is capable of bringing payloads at temperatures down to 20 K, in high vacuum, and with the desired metrology instruments integrated to the systems control. Flexure plans to lease Mobile Chambers, making them affordable for smaller budgets and available to a larger customer base. A key feature of this design will be an Apple iPad-like user interface that allows someone with minimal training to control the environment inside the chamber, and to simulate the required extreme environments. The feedback of thermal, pressure, and other measurements is delivered in a 3D CAD model of the chamber's payload and support hardware. This GUI will provide the user with a better understanding of the payload than any existing thermal-vacuum system.

  2. CHAMBER OF COMMERCE INFORMATION

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Experience Japan The Japanese Chamber of Commerce and Industry will further promote its Japan-experience program and seek cooperation with various Chinese institutions.Between early May and June 2007,the chamber organized a Chinese college student delegation to Japan with the support from its members in China.

  3. Determination of ion recombination correction factors for a liquid ionization chamber in megavoltage photon beams

    Science.gov (United States)

    Choi, Sang Hyoun; Kim, Kum-Bae; Ji, Young Hoon; Kim, Chan Hyeong; Kim, Seonghoon; Huh, Hyun Do

    2015-05-01

    The aim of this study is to determine the ion recombination correction factor for a liquid ionization chamber in a high energy photon beam by using our experimental method. The ion recombination correction factors were determined by using our experimental method and were compared with theoretical and experimental methods proposed by using the theoretical method (Greening, Johansson) and the two-dose rate method in a cobalt beam and a high energy photon beam. In order to apply the liquid ionization chamber in a reference and small field dosimetry, we acquired the absorbed dose to water correction coefficient, the beam quality correction factor, and the influence quantities for the microLion chamber according to the TRS-398 protocol and applied the results to a high energy photon beam used in clinical fields. As a result, our experimental method for ion recombination in a cobalt beam agreed with the results from the heoretical method (Greening theory) better than it did with the results from the two-dose rate method. For high energy photon beams, the two-dose rate and our experimental methods were in good agreement, less than 2% deviation, while the theoretical general collection efficiency (Johansson et al.) deviated greatly from the experimental values. When we applied the factors for the absorbed dose to water measurement, the absorbed dose to water for the microLion chamber was in good agreement, within 1%, compared with the values for the PTW 30013 chamber in 6 and 10 MV Clinac iX and 6 and 15 MV Oncor impression. With these results, not only can the microLion ionization chamber be used to measure the absorbed dose to water in a reference condition, it can also be used to a the chamber for small, non-standard field dosimetry.

  4. Assaying multiple 125I seeds with the well-ionization chamber SourceCheck4π 33005 and a new insert

    Science.gov (United States)

    Ballester, Facundo; Perez-Calatayud, Jose; Vijande, Javier

    2015-01-01

    Purpose To provide a practical solution that can be adopted in clinical routine to fulfill the AAPM-ESTRO recommendations regarding quality assurance of seeds used in prostate permanent brachytherapy. The aim is to design a new insert for the well-ionization chamber SourceCheck4π 33005 (PTW, Germany) that allows evaluating the mean air-kerma strength of up to ten 125I seeds with one single measurement instead of measuring each seed individually. Material and methods The material required is: a) the SourceCheck4π 33005 well-ionization chamber provided with a PTW insert to measure the air-kerma strength S K of one single seed at a time; b) a newly designed insert that accommodates ten seeds in one column, which allows measuring the mean S K of the ten seeds in one single measurement; and c) a container with ten seeds from the same batch and class of the seeds used for the patient implant, and a set of nine non-radioactive seeds. The new insert is characterized by determining its calibration coefficient, used to convert the reading of the well-chamber when ten seeds are measured to their mean S K. The proposed method is validated by comparing the mean S K of the ten seeds obtained from the new insert with the individual measurement of S K of each seed, evaluated with the PTW insert. Results The ratio between the calibration coefficient of the new insert and the calibration coefficient of the PTW insert for the SourceCheck4π 33005 is 1.135 ± 0.007 (k = 1). The mean S K of a set of ten seeds evaluated with this new system is in agreement with the mean value obtained from measuring independently the S K of each seed. Conclusions The new insert and procedure allow evaluating the mean S K of ten seeds prior to the implant in a single measurement. The method is faster and more efficient from radiation protection point of view than measuring the individual S K of each seed. PMID:26816507

  5. Ideal citizens: the birthing of state truths and fictions in Quintana Roo.

    Science.gov (United States)

    Williams, Sarah A

    2016-12-01

    Reducing the maternal mortality rate (MMR) is an important part of Mexico's commitment to the Millennium Development Goals, and the country has made great strides towards achieving this goal. However, researchers have questioned to what extent the focus on improved MMR and other indices of maternal health has contributed to an emphasis on improved statistics rather than quality care, and the effect this has had on the quality of reporting. While public health officials and hospital administrators alike agree that improved obstetric reporting is necessary, there is little discussion regarding the accuracy of the data that are submitted and the institutional pressures that may contribute to the production of inaccurate data. Using ethnographic research collected in Tulum, Quintana Roo, this paper explores how biomedical childbirth functions as a source of legitimization for the state while simultaneously providing the means for the presentation of an ideal subjecthood, one that situates birthing women and healthcare personnel as properly attenuated to the norms and needs of the modern Mexican state. By highlighting the point of disjuncture between women's experiences and the formal 'reality' created through hospital texts, this paper explores the place of biomedical birth as a producer of and legitimization for Mexican public health policy.

  6. Associated Factors to Seroprevalence of Ehrlichia spp. in Dogs of Quintana Roo, Mexico

    Science.gov (United States)

    Martínez-Vega, Pedro Pablo; Rodríguez-Vivas, Roger Iván; Pérez-Osorio, Carlos; Villegas-Perez, Sandra Luz; Sauri-Arceo, Carlos Humberto

    2016-01-01

    The objective of this study was to determine the seroprevalence to Ehrlichia spp. in dogs from Xcalak, Quintana Roo, Mexico, and the associated factors. Serum samples were obtained from 118 dogs and used in an indirect immunofluorescent assay test for the detection of antibodies against Ehrlichia spp. A questionnaire was used to obtain information about possible variables associated with seroprevalence. These variables were analyzed through Chi2 test and logistic regression. Dog seroprevalence of antibodies against Ehrlichia spp. was 64% (75/118). Fifty-two percent (61/118) of dogs had tick infestation which was identified as Rhipicephalus sanguineus sensu lato. Anemia was observed in 36% of dogs. Leucopenia (2.5%), thrombocytopenia (70%), and hemorrhage (14%) were also observed. Thirty-one percent (23/75) of dogs with anemia, 4% (3/75) of dogs with leucopenia, 80% (60/75) of dogs with thrombocytopenia, 17% (13/75) of dogs with hemorrhages, and 59% (44/75) of dogs with ticks were positive for Ehrlichia spp. antibodies. The factors associated with seroprevalence were age (1–3 and >3 years old, OR = 7.77 and OR = 15.39, resp.), tick infestation (OR = 3.13), and thrombocytopenia (OR = 3.36). In conclusion, seroprevalence of Ehrlichia spp. was high in the community of Xcalak and its associated factors were age, tick infestation, and thrombocytopenia. PMID:28096818

  7. Mechanisms of insecticide resistance in field populations of Aedes aegypti (L.) from Quintana Roo, Southern Mexico.

    Science.gov (United States)

    Flores, Adriana E; Grajales, Jaime Salomon; Salas, Ildefonso Fernandez; Garcia, Gustavo Ponce; Becerra, Ma Haydee Loaiza; Lozano, Saul; Brogdon, William G; Black, William C; Beaty, Barry

    2006-12-01

    Potential insecticide-resistance mechanisms were studied with the use of biochemical assays in Aedes aegypti (L.) collected from 5 municipalities representing the north part of Quintana Roo: Benito Juarez, Cozumel, Isla Mujeres, Lazaro Cardenas, and Solidaridad. The activities of alpha and beta esterases, mixed-function oxidases (MFO), glutathione-S-transferase (GST), acethylcholinesterase (AChE), and insensitive acethylcholinesterase (iAChE) were assayed in microplates. Three replicates were performed for each enzyme and 60 males and 60 females were analyzed in each population. The New Orleans (NO) susceptible strain of Ae. aegypti was used as a susceptible reference and the threshold criteria for each enzyme were the highest NO absorbance values. In none of the 6 tests were absorbance values correlated in males and females. alpha esterases were elevated in Benito Juarez, Cozumel females and in Lazaro Cardenas males and females. beta esterases were elevated in Benito Juarez, Cozumel females and in Cozumel and Lazaro Cardenas males. Elevated esterases suggest potential insecticide-resistance mechanisms against organophosphate, carbamate, and some pyrethroid insecticides. Slightly elevated levels of MFOs appeared in Lazaro Cardenas females and in Cozumel, Isla Mujeres, and Solidaridad males. Mechanisms involving iAChE or GST were not apparent.

  8. Associated Factors to Seroprevalence of Ehrlichia spp. in Dogs of Quintana Roo, Mexico

    Directory of Open Access Journals (Sweden)

    Pedro Pablo Martínez-Vega

    2016-01-01

    Full Text Available The objective of this study was to determine the seroprevalence to Ehrlichia spp. in dogs from Xcalak, Quintana Roo, Mexico, and the associated factors. Serum samples were obtained from 118 dogs and used in an indirect immunofluorescent assay test for the detection of antibodies against Ehrlichia spp. A questionnaire was used to obtain information about possible variables associated with seroprevalence. These variables were analyzed through Chi2 test and logistic regression. Dog seroprevalence of antibodies against Ehrlichia spp. was 64% (75/118. Fifty-two percent (61/118 of dogs had tick infestation which was identified as Rhipicephalus sanguineus sensu lato. Anemia was observed in 36% of dogs. Leucopenia (2.5%, thrombocytopenia (70%, and hemorrhage (14% were also observed. Thirty-one percent (23/75 of dogs with anemia, 4% (3/75 of dogs with leucopenia, 80% (60/75 of dogs with thrombocytopenia, 17% (13/75 of dogs with hemorrhages, and 59% (44/75 of dogs with ticks were positive for Ehrlichia spp. antibodies. The factors associated with seroprevalence were age (1–3 and >3 years old, OR = 7.77 and OR = 15.39, resp., tick infestation (OR = 3.13, and thrombocytopenia (OR = 3.36. In conclusion, seroprevalence of Ehrlichia spp. was high in the community of Xcalak and its associated factors were age, tick infestation, and thrombocytopenia.

  9. Analysis and forecasting of wind velocity in chetumal, quintana roo, using the single exponential smoothing method

    Energy Technology Data Exchange (ETDEWEB)

    Cadenas, E. [Facultad de Ingenieria Mecanica, Universidad Michoacana de San Nicolas de Hidalgo, Santiago Tapia No. 403, Centro (Mexico); Jaramillo, O.A.; Rivera, W. [Centro de Ivestigacion en Energia, Universidad Nacional Autonoma de Mexico, Apartado Postal 34, Temixco 62580, Morelos (Mexico)

    2010-05-15

    In this paper the analysis and forecasting of wind velocities in Chetumal, Quintana Roo, Mexico is presented. Measurements were made by the Instituto de Investigaciones Electricas (IIE) during two years, from 2004 to 2005. This location exemplifies the wind energy generation potential in the Caribbean coast of Mexico that could be employed in the hotel industry in the next decade. The wind speed and wind direction were measured at 10 m above ground level. Sensors with high accuracy and a low starting threshold were used. The wind velocity was recorded using a data acquisition system supplied by a 10 W photovoltaic panel. The wind speed values were measured with a frequency of 1 Hz and the average wind speed was recorded considering regular intervals of 10 min. First a statistical analysis of the time series was made in the first part of the paper through conventional and robust measures. Also the forecasting of the last day of measurements was made utilizing the single exponential smoothing method (SES). The results showed a very good accuracy of the data with this technique for an {alpha} value of 0.9. Finally the SES method was compared with the artificial neural network (ANN) method showing the former better results. (author)

  10. SU-E-T-100: How to Improve the Dose Accuracy for Gantry Angle Dependent Patient Specific IMRT QA Using 2D Ion Chamber Array with Octavius Phantom.

    Science.gov (United States)

    Choi, D; Nookala, P; Patyal, B

    2012-06-01

    To determine the cross calibration factors which can predict more accurate dose distribution for fixed beam IMRT QA using Octavius phantom. The ion chamber based Octavius 2D-array detector (PTW, Freiburg, Germany) is a step in the right direction to measure the absolute dose and dose distribution for patient specific IMRT QA. However, the directional dependency of this detector made it less than desirable for angle dependent IMRT QA. We evaluated the new Octavius system (PTW, Freiburg, Germany) for angle dependent IMRT QA which compensates the response due to directional dependency. The system is designed for full arc VMAT QA, but does not always work for the discrete angle IMRT QA due to non-averaging of errors caused by directional dependence of detectors. The proposed method uses correction factors for each gantry angle. The dose for a 10cm × 10cm open field for each gantry angle was calculated by treatment planning system and measured using the Octavius phantom. The correction factors were determined at each gantry angle and the dose distribution was renormalized at each angle using correction factors. The discrepancy between measured and planned dose per monitor unit depended on the gantry angle and were in the range of +-4% using the PTW method. Using our method, uncertainty due to the detector angle dependency was eliminated. The new method removes the angle dependency of ion chamber based 2D array detector for the fixed beam IMRT QA. It provides fast, accurate and more realistic results for angle dependent IMRT QA. © 2012 American Association of Physicists in Medicine.

  11. Investigation of carbon supported PtW catalysts as CO tolerant anodes at high temperature in proton exchange membrane fuel cell

    Science.gov (United States)

    Hassan, Ayaz; Paganin, Valdecir A.; Ticianelli, Edson A.

    2016-09-01

    The CO tolerance mechanism and the stability of carbon supported PtW electrocatalysts are evaluated in the anode of a proton exchange membrane fuel cell (PEMFC) at two different temperatures. The electrocatalysts are characterized by energy dispersive spectroscopy, X-ray diffraction, and transmission electron spectroscopy. Employed electrochemical techniques include cyclic voltammetry, CO stripping, fuel cell polarization, and online mass spectrometry. At a cell temperature of 85 °C, the PtW/C catalyst shows higher CO tolerance compared to Pt/C due an electronic effect of WOx in the Pt 5d band, which reduces the CO adsorption. An increase in hydrogen oxidation activity in the presence of CO is observed for both the catalysts at a higher temperature, due to the decrease of the Pt-CO coverage. A reduction in the current densities occurs for the PtW/C catalyst in both polarization curves and cyclic voltammograms after 5000 cycles of the anode in the range of 0.1-0.7 V vs. RHE at 50 mVs-1. This decrease in performance is assigned to the dissolution of W, with a consequent increase in the membrane resistivity. However, the observed decline of performance is small either in the presence of pure H2 or in the presence of H2/CO.

  12. Experimental comparison of profiles of acquired small fields with ionization chambers, diodes, radiochromic s and TLD films; Comparacion experimental de perfiles de campos pequenos adquiridos con camaras de ionizacion, diodos, peliculas radiocromicas y TLD

    Energy Technology Data Exchange (ETDEWEB)

    Venencia, D.; Garrigo, E. [Instituto Privado de Radioterapia, Obispo Oro 423, X5000BFI Cordoba (Argentina); Filipuzzi, M. [Instituto Balseiro, Centro Atomico Bariloche, Av. Bustillo 9500, 8400 Bariloche - Rio Negro (Argentina); Germanier, A., E-mail: devenencia@radioncologia-zunino.org [Centro de Excelencia en Productos y Procesos, Santa Maria de Punilla, 5164 Cordoba (Argentina)

    2014-08-15

    The use of radiation small fields, introduced by new techniques, can bring a considerable uncertainty in the precision of the acquired profiles, due to the conditions of lateral electronic non-equilibrium and the perturbations introduced by the detectors (volume effect and alteration of the charged particles flowing) [Das et al., 2007]. The development of new miniature detectors looks to diminish the uncertainty created by the material and the size of the sensitive volume of the dosimeter. For this reason, comparative measurements for three sizes of square field were carried out (20 mm, 10 mm and 5 mm, of side) using a detectors series: 3 ionization chambers (PTW-31003, IBA-CC04, PTW-31016), 2 diodes (PTW-60012, IBA-Sfd), thermoluminescent detectors micro-cubes of 1 mm of edge (TLD-700) and radiochromic s films EBT-3. These last two were used as reference detectors, due to their spatial high resolution and similar performance with Monte Carlo simulations [Francescon et al., 1998]. So much the thermoluminescent detectors as the radiochromic films resolved the profiles in a similar way. Both diodes responded correctly, but the rest of the detectors overestimated the gloom of the fields, which allows conclude that the used TLD (and both diodes) can resolve field sizes correctly, usually utilized in radio-surgery, without producing significant alterations in the acquired data. (author)

  13. PS wire chamber

    CERN Multimedia

    1970-01-01

    A wire chamber used at CERN's Proton Synchrotron accelerator in the 1970s. Multi-wire detectors contain layers of positively and negatively charged wires enclosed in a chamber full of gas. A charged particle passing through the chamber knocks negatively charged electrons out of atoms in the gas, leaving behind positive ions. The electrons are pulled towards the positively charged wires. They collide with other atoms on the way, producing an avalanche of electrons and ions. The movement of these electrons and ions induces an electric pulse in the wires which is collected by fast electronics. The size of the pulse is proportional to the energy loss of the original particle.

  14. OPAL Jet Chamber Prototype

    CERN Multimedia

    OPAL was one of the four experiments installed at the LEP particle accelerator from 1989 - 2000. OPAL's central tracking system consists of (in order of increasing radius) a silicon microvertex detector, a vertex detector, a jet chamber, and z-chambers. All the tracking detectors work by observing the ionization of atoms by charged particles passing by: when the atoms are ionized, electrons are knocked out of their atomic orbitals, and are then able to move freely in the detector. These ionization electrons are detected in the dirfferent parts of the tracking system. This piece is a prototype of the jet chambers

  15. Uniprindi büroo- ja trükikojahoone : edu peatänavatest, Uniprindi trükikojast ning geneerilisest arhitektuurist = Success from Main Streets, Uniprint Printing Plant, and Generic Architecture / Veljo Kaasik

    Index Scriptorium Estoniae

    Kaasik, Veljo

    2000-01-01

    Pärnu mnt. ristmiku juurde Tallinnas R. Puusepa arhitektibüroo poolt trükikojale Uniprint projekteeritud büroo-tootmishoonest. Arhitektid Raivo Puusepp, Krista Väärtnõu. Konstruktsioonid: Projektbüroo Teinos, Civen OÜ. Projekt 1999-2000, hoone valmis 2000. Peatänavaid ääristava hoonestuse kiirest muundumisest. 9 ill.: korruste plaanid, lõiked, vaated (joon.); välisvaated (foto)

  16. Uniprindi büroo- ja trükikojahoone : edu peatänavatest, Uniprindi trükikojast ning geneerilisest arhitektuurist = Success from Main Streets, Uniprint Printing Plant, and Generic Architecture / Veljo Kaasik

    Index Scriptorium Estoniae

    Kaasik, Veljo

    2000-01-01

    Pärnu mnt. ristmiku juurde Tallinnas R. Puusepa arhitektibüroo poolt trükikojale Uniprint projekteeritud büroo-tootmishoonest. Arhitektid Raivo Puusepp, Krista Väärtnõu. Konstruktsioonid: Projektbüroo Teinos, Civen OÜ. Projekt 1999-2000, hoone valmis 2000. Peatänavaid ääristava hoonestuse kiirest muundumisest. 9 ill.: korruste plaanid, lõiked, vaated (joon.); välisvaated (foto)

  17. Correction of measured Gamma-Knife output factors for angular dependence of diode detectors and PinPoint ionization chamber.

    Science.gov (United States)

    Hršak, Hrvoje; Majer, Marija; Grego, Timor; Bibić, Juraj; Heinrich, Zdravko

    2014-12-01

    Dosimetry for Gamma-Knife requires detectors with high spatial resolution and minimal angular dependence of response. Angular dependence and end effect time for p-type silicon detectors (PTW Diode P and Diode E) and PTW PinPoint ionization chamber were measured with Gamma-Knife beams. Weighted angular dependence correction factors were calculated for each detector. The Gamma-Knife output factors were corrected for angular dependence and end effect time. For Gamma-Knife beams angle range of 84°-54°. Diode P shows considerable angular dependence of 9% and 8% for the 18 mm and 14, 8, 4 mm collimator, respectively. For Diode E this dependence is about 4% for all collimators. PinPoint ionization chamber shows angular dependence of less than 3% for 18, 14 and 8 mm helmet and 10% for 4 mm collimator due to volumetric averaging effect in a small photon beam. Corrected output factors for 14 mm helmet are in very good agreement (within ±0.3%) with published data and values recommended by vendor (Elekta AB, Stockholm, Sweden). For the 8 mm collimator diodes are still in good agreement with recommended values (within ±0.6%), while PinPoint gives 3% less value. For the 4 mm helmet Diodes P and E show over-response of 2.8% and 1.8%, respectively. For PinPoint chamber output factor of 4 mm collimator is 25% lower than Elekta value which is generally not consequence of angular dependence, but of volumetric averaging effect and lack of lateral electronic equilibrium. Diodes P and E represent good choice for Gamma-Knife dosimetry.

  18. ALICE Time Projection Chamber

    CERN Multimedia

    Lippmann, C

    2013-01-01

    The Time Projection Chamber (TPC) is the main device in the ALICE 'central barrel' for the tracking and identification (PID) of charged particles. It has to cope with unprecedented densities of charges particles.

  19. Vacuum chamber 'bicone'

    CERN Multimedia

    1977-01-01

    This chamber is now in the National Museum of History and Technology, Smithsonian Institution, Washington, DC, USA, where it was exposed in an exhibit on the History of High Energy Accelerators (1977).

  20. High rate drift chambers

    Energy Technology Data Exchange (ETDEWEB)

    Christian, D.C. (Fermilab, Batavia, IL 60510 (United States)); Berisso, M.C. (Fermilab, Batavia, IL 60510 (United States)); Gutierrez, G. (Fermilab, Batavia, IL 60510 (United States)); Holmes, S.D. (Fermilab, Batavia, IL 60510 (United States)); Wehmann, A. (Fermilab, Batavia, IL 60510 (United States)); Avilez, C. (Instituto de Fisica, Universidad de Guanajuato, Leon, Guanajuato (Mexico)); Felix, J. (Instituto de Fisica, Universidad de Guanajuato, Leon, Guanajuato (Mexico)); Moreno, G. (Instituto de Fisica, Universidad de Guanajuato, Leon, Guanajuato (Mexico)); Romero, M. (Instituto de Fisica, Universidad de Guanajuato, Leon, Guanajuato (Mexico)); Sosa, M. (Instituto de Fisica, Universidad de Guanajuato, Leon, Guanajuato (Mexico)); Forbush, M. (Department of Physics, Texas A and M University, College Station, TX 77843 (United States)); Huson, F.R. (Department of Physics, Texas A and M University, College Station, TX 77843 (United States)); Wightman, J.A. (Department of Physi

    1994-06-01

    Fermilab experiment 690, a study of target dissociation reactions pp[yields]pX using an 800 GeV/c proton beam and a liquid hydrogen target, collected data in late 1991. The incident beam and 600-800 GeV/c scattered protons were measured using a system of six 6 in.x4 in. and two 15 in.x8 in. pressurized drift chambers spaced over 260 m. These chambers provided precise measurements at rates above 10 MHz (2 MHz per cm of sense wire). The measurement resolution of the smaller chambers was 90 [mu]m, and the resolution of the larger chambers was 125 [mu]m. Construction details and performance results, including radiation damage, are presented. ((orig.))

  1. Toxic Test Chambers

    Data.gov (United States)

    Federal Laboratory Consortium — Description/History: Hazardous material test facility Both facilities have 16,000 cubic foot chambers, equipped with 5000 CFM CBR filter systems with an air change...

  2. Bubble chamber: antiproton annihilation

    CERN Multimedia

    1971-01-01

    These images show real particle tracks from the annihilation of an antiproton in the 80 cm Saclay liquid hydrogen bubble chamber. A negative kaon and a neutral kaon are produced in this process, as well as a positive pion. The invention of bubble chambers in 1952 revolutionized the field of particle physics, allowing real tracks left by particles to be seen and photographed by expanding liquid that had been heated to boiling point.

  3. [Intimate partner violence. Types and risk in primary care health users in Cancun, Quintana Roo, Mexico].

    Science.gov (United States)

    Sandoval-Jurado, Luis; Jiménez-Báez, María Valeria; Rovira Alcocer, Gloria; Vital Hernandez, Omar; Pat Espadas, Fany Guadalupe

    2017-10-01

    To identify the prevalence and type of intimate partner violence in women assigned at primary care health and estimates the risks for violence. Case (incident cases)-control. Primary health care unit in Cancun, Quintana Roo, Mexico. Women over 18years old living in couple at last 12months. Validated violence scale for Mexican population was evaluated: total partner violence, physical, psychological and sexual violence. History of violence and sociodemographic variables. Chi square for categorical variables and odds ratio (OR) for risk estimate was determined. The total intimate partner violence was 15.05%, psychological violence in 37.3%. Overall violence, age differences, socioeconomic status, marital status, history of violence and alcohol intake by the partner (P<.05) were observed. The risk increased in over 40 years old (OR: 2.09; 95%CI: 1.07 to 4.11), history of violence (OR: 5.9; 95%CI: 2.8 to 12.44) and alcohol intake by partner (OR=12.38; 95%CI: 2.15 to 29.59). Low socioeconomic status (OR: 0.384; 95%CI: 0.19 to 0.74) and free union (OR: 0.507; 95%CI: 0.27 to 0.95) were relation factors to lower intimate violence partner. Sexual violence predominated among users of primary health care and the risk that present this behavior increases with the consumption of alcoholic beverages in the couple and a history of violence, but the free union and socioeconomic status were possibility protected for violence. Copyright © 2017 Elsevier España, S.L.U. All rights reserved.

  4. Determination of the true null electrode spacing of an extrapolation chamber for X-ray dosimetry

    Energy Technology Data Exchange (ETDEWEB)

    Figueiredo, M.T.T.; Bastos, F.M.; Silva, T.A. da, E-mail: mttf@cdtn.br, E-mail: fmb@cdtn.br, E-mail: silvata@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil). Pos-Graduacao em Ciencia e Tecnologia da Radiacao, Minerais e Materiais

    2015-07-01

    An accurate determination of the actual null distance is critical for the establishment of primary measurement method for absorbed dose in tissue, since the concept of the true null electrode spacing is used to define the sensitive volume of an extrapolation chamber. In this paper, a critical analysis of two methodologies for determining the true null electrode spacing of an extrapolation chamber was done. Firstly, the ionization current as a function of electrode spacing was measured in ISO 4037 low energy X-ray beams. In the second procedure, a LC Bridge was used to measure the capacitance between the electrodes of a 23392 Böhm model PTW ionization chamber and a reliable relationship between capacitance and relative distance was established. Results showed that the true null spacing values varied from 0.0015 to 0.38 mm. Since capacitance meters with high resolution are not always available in calibration laboratories, the second method showed values with large uncertainties. The first method proved to be highly sensitive to the quality of the X-ray beams used. (author)

  5. An innovative method for {sup 192}Ir HDR calibration by farmer chamber, V-film, and solid phantom

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Liyun; Ding, Hueisch-Jy [Department of Medical Imaging and Radiological Sciences, I-Shou University, Kaohsiung, Taiwan (China); Ho, Sheng-Yow, E-mail: shengho@seed.net.tw [Department of Radiation Oncology, Sinlau Christian Hospital, Tainan, Taiwan (China)

    2011-08-01

    A simple, practical and economical technique was proposed to calibrate an {sup 192}Ir HDR brachytherapy source in terms of air kerma strength. This technique makes use of the 0.6 cm{sup 3} Farmer type ion chamber, radiographic film and polystyrene phantom. These tools are commonly used for dosimetry quality assurance of the clinical linear accelerator. In this study, the Exradin A19, PTW N30004 and TM30001 Farmer type ion chambers were used for the calibration of the {sup 192}Ir HDR source. To perform the calibration, a 25.4x30.5 cm{sup 2} radiographic film was taped on a piece of polystyrene plate, and a straight applicator probe of a HDR brachytherapy unit and the Farmer type ion chamber were affixed to the film envelope. The film was irradiated by the {sup 192}Ir source, followed by an exposure in the simulator X-ray beam. The film set with the film removed was then placed on a 5 cm thick polystyrene phantom for calibration measurement. Based on the electrometer reading from the Farmer type ion chamber irradiated by {sup 192}Ir and the measured source-to-chamber distance by means of the images on the developed film, we can calculate the air kerma strength of the {sup 192}Ir using the new technique. Our calibration results were compared to the data provided by the manufacturer and that of five different well type ion chambers, namely, Sun Nuclear cooperation (SNC) 1008, Nucletron SDS 077.091, SDS 077.094, PTW TN33004 and Standard Imaging (SI) HDR-1000 Plus. The differences were all within 1.6%. Relative to the '7-distance measurement technique' by Stump et al., 2002, our method is more efficient if our empirical formula was used. In summary, our method is simpler and cost-effective to calibrate an {sup 192}Ir HDR brachytherapy source for those hospitals without a calibration jig or a well type ion chamber.

  6. SU-E-T-343: Valencia Applicator Commissioning Using a Micro-Chamber Array

    Energy Technology Data Exchange (ETDEWEB)

    Carmona-Meseguer, V; Palomo-Llinares, R; Candela-Juan, C; Gimeno-Olmos, J; Lliso-Valverde, F [Hospital La Fe, Valencia (Spain); Garcia-Martinez, T [Hospital de La Ribera, Alzira, Valencia (Spain); Richart-Sancho, J [Clinica Benidorm, Benidorm, Alicante (Spain); Granero, D [ERESA-Hospital General Universitario, Mislata, Valencia (Spain); Ballester, F [University of Valencia, Burjassot, Valencia (Spain); Perez-Calatayud, J [Hospital La Fe, Valencia (Spain); Clinica Benidorm, Benidorm, Alicante (Spain)

    2014-06-01

    Purpose: In the commissioning and QA of surface isotope-based applicators, source-indexer distance (SID) has a great influence in the flatness, symmetry and output. To these purposes, methods described in the literature are the use of a special insert at the entrance of dwell chamber or radiochromic films. Here we present the experience with a micro-chamber array to perform the commissioning and QA of Valencia applicators. Methods: Valencia applicators have been used, the classic and the new extra-shielded version. A micro-chamber array has been employed, 1000 SRS (PTW), with 977 liquid filled, 2.3×2.3×0.5 mm{sup 3} sized ion chambers covering 11×11 cm{sup 2}, which spacing is 2.5 mm in the central 5.5×5.5 cm{sup 2}, dedicated mainly in principle, in conjunction with Octavius 4D (PTW), to IMRT, VMAT, SBRT verifications. Verisoft software that allows for 3D and planar analysis has been used to evaluate the results. Applicators were located on the surface of the array. To verify the SID, measurements corresponding to the reference value, SID ± 1 mm and SID ± 2 mm were acquired (integration time was fixed in order to discard the influence of the source entrance/exit). Once SID was determined, standard protocol treatments corresponding to 3 Gy and 7 Gy were acquired in order to establish typical patient dose distribution. Results: The method is fast and sensitive. The SID obtained was 1321 mm which is the nominal value included in the applicator manual. For example at 1319 mm an asymmetry of ±8% with respect to the central value was measured, along with a central deviation of −4% referred to 1321 mm. Conclusion: A practical method for the commissioning and QA of Valencia applicators has been described. It has been shown that it is an efficient and accurate tool for these purposes as well as for the verification of the absolute output constancy.

  7. Cambios de cobertura y uso del suelo (1979-2000) en dos comunidades rurales en el noroeste de Quintana Roo

    OpenAIRE

    Juan Manuel Dupuy Rada; José Antonio González Iturbe; Silvia Iriarte Vivar; Luz María Calvo Irabien; Celene Espadas Manrique; Fernando Tun Dzull; Alfredo Dorantes Euán

    2007-01-01

    El análisis de los cambios de cobertura y uso del suelo (ccus) en relación con las actividades humanas es esencial para entender y predecir la dinámica del paisaje. Se analizan los ccus en Solferino y San Ángel, dos comunidades rurales del noroeste de Quintana Roo, a partir de fotografías aéreas de 1979 y 2000, recorridos de campo y entrevistas para documentar la historia de uso del suelo. Contrario a la mayoría de estudios, se registró un aumento en la cobertura de selvas, proven...

  8. La configuración del espacio turístico en Cancún, Quintana Roo, México

    OpenAIRE

    Aldape Pérez, Guadalupe

    2010-01-01

    Recientemente el turismo se ha convertido en una de las actividades económicas de mayor crecimiento en el mundo. El turismo se ha vuelto una herramienta clave en el tema de progresosocio-económico, tanto en países en vías de desarrollo como en países industrializados o desarrollados, dando origen a una gama de nuevos destinos a nivel global.Esta tesis doctoral centra su atención en el primer y más exitoso destino turístico planificado exnovo en México: Cancún, Quintana Roo. La ordenación del ...

  9. Estrategias de recuperación de selvas en dos ejidos de Quintana Roo, México

    OpenAIRE

    Silvia Rebollar Domínguez; Victoria Santos Jiménez; Rodolfo Luis Sánchez Aguilar

    2002-01-01

    Con el fin de contrarrestar el grave problema de la deforestación en Quintana Roo, en 1984 se creó el Plan Piloto Forestal que se desarrolló en la zona centro y sur del estado, el cual derivó en Sociedades Civiles como la Organización de Ejidos Productores Forestales de la Zona Maya. (OEPFZM. S.C.). A ella pertenecen los ejidos Naranjal y Santa María cuyas actividades de aprovechamiento y conservación de sus selvas se contemplan en un plan de manejo forestal basado en las características ecol...

  10. Results of a survey about translation use in the english language major at the university of quintana roo, mexico.

    OpenAIRE

    Zanier Visintin, Alessio

    2014-01-01

    This paper aims at highlighting the outcome of a survey carried out on students of the English Language Major, at the University of Quintana Roo at Chetumal- Mexico, in the spring of 2010. The survey hinged on the usefulness of translation in the teaching of English at university level in Mexico, and consisted of seven open questions proposed to fifty students of the 8th and 10th semesters of the major. Students were required to express their opinions in full about the possible positive influ...

  11. Anatomía de la madera de dos especies de Eugenia (Myrtaceae) de Quintana Roo, México

    OpenAIRE

    2010-01-01

    En México la familia Myrtaceae está representada por doce géneros que se distribuyen ampliamente en regiones templadas, tropicales y semiáridas. La importancia económica de esta familia se basa principalmente en la extracción de la madera (Eucalyptus spp.), el consumo de frutos (Psidium spp.) y la apicultura (Eugenia spp.), entre otros usos. En Quintana Roo se han registrado varios géneros de la familia, entre los cuales Eugenia, con varias especies está bien representado en la selva mediana...

  12. Factores familiares asociados a codependencia en enfermeras de un hospital de Cancún, Quintana Roo, México

    OpenAIRE

    Ramírez-Amaro, Margarita; Martínez-Torres, Jorge; Ureña Bogarín, Enrique Leobardo

    2014-01-01

    Objetivo: Identificar los factores familiares asociados a la presencia de codependencia en las enfermeras de un hospital regional en Cancún, Quintana Roo, México. Diseño: Estudio transversal, comparativo. Emplazamiento: Ciudad de Cancún (México). Participantes: Mediante un muestreo aleatorizado se seleccionaron 200 enfermeras que cumplieron los criterios de selección (tener pareja de más de un año, acudir a trabajar el día de la entrevista, tener contrato laboral al momento del estud...

  13. Improved Rhenium Thrust Chambers

    Science.gov (United States)

    O'Dell, John Scott

    2015-01-01

    Radiation-cooled bipropellant thrust chambers are being considered for ascent/ descent engines and reaction control systems on various NASA missions and spacecraft, such as the Mars Sample Return and Orion Multi-Purpose Crew Vehicle (MPCV). Currently, iridium (Ir)-lined rhenium (Re) combustion chambers are the state of the art for in-space engines. NASA's Advanced Materials Bipropellant Rocket (AMBR) engine, a 150-lbf Ir-Re chamber produced by Plasma Processes and Aerojet Rocketdyne, recently set a hydrazine specific impulse record of 333.5 seconds. To withstand the high loads during terrestrial launch, Re chambers with improved mechanical properties are needed. Recent electrochemical forming (EL-Form"TM") results have shown considerable promise for improving Re's mechanical properties by producing a multilayered deposit composed of a tailored microstructure (i.e., Engineered Re). The Engineered Re processing techniques were optimized, and detailed characterization and mechanical properties tests were performed. The most promising techniques were selected and used to produce an Engineered Re AMBR-sized combustion chamber for testing at Aerojet Rocketdyne.

  14. DELPHI Barrel Muon Chamber Module

    CERN Multimedia

    1989-01-01

    The module was used as part of the muon identification system on the barrel of the DELPHI detector at LEP, and was in active use from 1989 to 2000. The module consists of 7 individual muons chambers arranged in 2 layers. Chambers in the upper layer are staggered by half a chamber width with respect to the lower layer. Each individual chamber is a drift chamber consisting of an anode wire, 47 microns in diameter, and a wrapped copper delay line. Each chamber provided 3 signal for each muon passing through the chamber, from which a 3D space-point could be reconstructed.

  15. The KLOE drift chamber

    Energy Technology Data Exchange (ETDEWEB)

    Adinolfi, M.; Aloisio, A.; Ambrosino, F.; Andryakov, A.; Antonelli, A.; Antonelli, M.; Anulli, F.; Bacci, C.; Bankamp, A.; Barbiellini, G.; Bellini, F.; Bencivenni, G.; Bertolucci, S.; Bini, C.; Bloise, C.; Bocci, V.; Bossi, F.; Branchini, P.; Bulychjov, S.A.; Cabibbo, G.; Calcaterra, A.; Caloi, R.; Campana, P.; Capon, G.; Carboni, G.; Cardini, A.; Casarsa, M.; Cataldi, G.; Ceradini, F.; Cervelli, F.; Cevenini, F.; Chiefari, G.; Ciambrone, P.; Conetti, S.; Conticelli, S.; Lucia, E. De; Robertis, G. De; Sangro, R. De; Simone, P. De; Zorzi, G. De; Dell' Agnello, S.; Denig, A.; Domenico, A. Di; Donato, C. Di; Falco, S. Di; Doria, A.; Drago, E.; Elia, V.; Erriquez, O.; Farilla, A.; Felici, G.; Ferrari, A.; Ferrer, M.L.; Finocchiaro, G.; Forti, C.; Franceschi, A.; Franzini, P.; Gao, M.L.; Gatti, C.; Gauzzi, P.; Giovannella, S.; Golovatyuk, V.; Gorini, E.; Grancagnolo, F.; Grandegger, W.; Graziani, E.; Guarnaccia, P.; Hagel, U.V.; Han, H.G.; Han, S.W.; Huang, X.; Incagli, M.; Ingrosso, L.; Jang, Y.Y.; Kim, W.; Kluge, W.; Kulikov, V.; Lacava, F.; Lanfranchi, G.; Lee-Franzini, J.; Lomtadze, F.; Luisi, C.; Mao, C.S.; Martemianov, M.; Matsyuk, M.; Mei, W.; Merola, L.; Messi, R.; Miscetti, S.; Moalem, A.; Moccia, S.; Moulson, M.; Mueller, S.; Murtas, F.; Napolitano, M.; Nedosekin, A.; Panareo, M.; Pacciani, L.; Pages, P.; Palutan, M.; Paoluzi, L.; Pasqualucci, E.; Passalacqua, L.; Passaseo, M.; Passeri, A.; Patera, V.; Petrolo, E.; Petrucci, G.; Picca, D.; Pirozzi, G.; Pistillo, C.; Pollack, M.; Pontecorvo, L.; Primavera, M.; Ruggieri, F.; Santangelo, P.; Santovetti, E.; Saracino, G.; Schamberger, R.D.; Schwick, C.; Sciascia, B.; Sciubba, A.; Scuri, F.; Sfiligoi, I.; Shan, J.; Silano, P.; Spadaro, T.; Spagnolo, S.; Spiriti, E.; Stanescu, C.; Tong, G.L.; Tortora, L.; Valente, E.; Valente, P. E-mail: paolo.valente@lnf.infn.it; Valeriani, B.; Venanzoni, G.; Veneziano, S.; Wu, Y.; Xie, Y.G.; Zhao, P.P.; Zhou, Y

    2001-04-01

    The tracking detector of the KLOE experiment is 4 m diameter, 3.3 m length drift chamber, designed to contain a large fraction of the decays of low-energy K{sub L} produced at the Frascati DAPHINE phi-factory. The chamber is made by a thin carbon fiber structure and operated with a helium-based gas mixture in order to minimise conversion of low-energy photons and multiple scattering inside the sensitive volume. The tracking information is provided by 58 layers of stereo wires defing 12,582 cells, 2x2 cm{sup 2} in size in the 12 innermost layers and 3x3 cm{sup 2} in the outer ones. Details of the chamber design, calibration procedure and tracking performances are presented.

  16. The KLOE drift chamber

    CERN Document Server

    Adinolfi, M; Ambrosino, F; Andryakov, A; Antonelli, A; Antonelli, M; Anulli, F; Bacci, C; Bankamp, A; Barbiellini, G; Bellini, F; Bencivenni, G; Bertolucci, Sergio; Bini, C; Bloise, C; Bocci, V; Bossi, F; Branchini, P; Bulychjov, S A; Cabibbo, G; Calcaterra, A; Caloi, R; Campana, P; Capon, G; Carboni, G; Cardini, A; Casarsa, M; Cataldi, G; Ceradini, F; Cervelli, F; Cevenini, F; Chiefari, G; Ciambrone, P; Conetti, S; Conticelli, S; Lucia, E D; Robertis, G D; Sangro, R D; Simone, P D; Zorzi, G D; Dell'Agnello, S; Denig, A; Domenico, A D; Donato, C D; Falco, S D; Doria, A; Drago, E; Elia, V; Erriquez, O; Farilla, A; Felici, G; Ferrari, A; Ferrer, M L; Finocchiaro, G; Forti, C; Franceschi, A; Franzini, P; Gao, M L; Gatti, C; Gauzzi, P; Giovannella, S; Golovatyuk, V; Gorini, E; Grancagnolo, F; Grandegger, W; Graziani, E; Guarnaccia, P; Von Hagel, U; Han, H G; Han, S W; Huang, X; Incagli, M; Ingrosso, L; Jang, Y Y; Kim, W; Kluge, W; Kulikov, V; Lacava, F; Lanfranchi, G; Lee-Franzini, J; Lomtadze, F; Luisi, C; Mao Chen Sheng; Martemyanov, M; Matsyuk, M; Mei, W; Merola, L; Messi, R; Miscetti, S; Moalem, A; Moccia, S; Moulson, M; Müller, S; Murtas, F; Napolitano, M; Nedosekin, A; Panareo, M; Pacciani, L; Pagès, P; Palutan, M; Paoluzi, L; Pasqualucci, E; Passalacqua, L; Passaseo, M; Passeri, A; Patera, V; Petrolo, E; Petrucci, Guido; Picca, D; Pirozzi, G; Pistillo, C; Pollack, M; Pontecorvo, L; Primavera, M; Ruggieri, F; Santangelo, P; Santovetti, E; Saracino, G; Schamberger, R D; Schwick, C; Sciascia, B; Sciubba, A; Scuri, F; Sfiligoi, I; Shan, J; Silano, P; Spadaro, T; Spagnolo, S; Spiriti, E; Stanescu, C; Tong, G L; Tortora, L; Valente, E; Valente, P; Valeriani, B; Venanzoni, G; Veneziano, Stefano; Wu, Y; Xie, Y G; Zhao, P P; Zhou, Y

    2001-01-01

    The tracking detector of the KLOE experiment is 4 m diameter, 3.3 m length drift chamber, designed to contain a large fraction of the decays of low-energy K sub L produced at the Frascati DAPHINE phi-factory. The chamber is made by a thin carbon fiber structure and operated with a helium-based gas mixture in order to minimise conversion of low-energy photons and multiple scattering inside the sensitive volume. The tracking information is provided by 58 layers of stereo wires defing 12,582 cells, 2x2 cm sup 2 in size in the 12 innermost layers and 3x3 cm sup 2 in the outer ones. Details of the chamber design, calibration procedure and tracking performances are presented.

  17. micro strip gas chamber

    CERN Multimedia

    1998-01-01

    About 16 000 Micro Strip Gas Chambers like this one will be used in the CMS tracking detector. They will measure the tracks of charged particles to a hundredth of a millimetre precision in the region near the collision point where the density of particles is very high. Each chamber is filled with a gas mixture of argon and dimethyl ether. Charged particles passing through ionise the gas, knocking out electrons which are collected on the aluminium strips visible under the microscope. Such detectors are being used in radiography. They give higher resolution imaging and reduce the required dose of radiation.

  18. Charpak hemispherical wire chamber

    CERN Multimedia

    1970-01-01

    pieces. Mesures are of the largest one. Multi-wire detectors contain layers of positively and negatively charged wires enclosed in a chamber full of gas. A charged particle passing through the chamber knocks negatively charged electrons out of atoms in the gas, leaving behind positive ions. The electrons are pulled towards the positively charged wires. They collide with other atoms on the way, producing an avalanche of electrons and ions. The movement of these electrons and ions induces an electric pulse in the wires which is collected by fast electronics. The size of the pulse is proportional to the energy loss of the original particle.

  19. 1 küsimus noorele juhile : Kuidas on kõige parem tähtsad põhimõtted töötajateni viia? / Kaarel Oja, Reet Roos, Martin Hurt... [jt.

    Index Scriptorium Estoniae

    2010-01-01

    Küsimusele vastavad Teater NO99 tegevjuht Kaarel Oja, meediaagentuuri Inspired, tööõigusbüroo ja trükikoja Digiprint omanik Reet Roos, kaitseministeeriumi asekantsler Martin Hurt, SOL Eesti personalijuht Evely Ellert ning investeerimis- ja varahalduslahendusi pakkuva Sampo Life juhatuse liige Erkki Sadam

  20. 1 küsimus noorele juhile : Kuidas on kõige parem tähtsad põhimõtted töötajateni viia? / Kaarel Oja, Reet Roos, Martin Hurt... [jt.

    Index Scriptorium Estoniae

    2010-01-01

    Küsimusele vastavad Teater NO99 tegevjuht Kaarel Oja, meediaagentuuri Inspired, tööõigusbüroo ja trükikoja Digiprint omanik Reet Roos, kaitseministeeriumi asekantsler Martin Hurt, SOL Eesti personalijuht Evely Ellert ning investeerimis- ja varahalduslahendusi pakkuva Sampo Life juhatuse liige Erkki Sadam

  1. Heavy liquid bubble chamber

    CERN Multimedia

    1965-01-01

    The CERN Heavy liquid bubble chamber being installed in the north experimental hall at the PS. On the left, the 1180 litre body; in the centre the magnet, which can produce a field of 26 800 gauss; on the right the expansion mechanism.

  2. OPAL Muon Chamber

    CERN Multimedia

    OPAL was one of the 4 experiments installed at the LEP particle accelerator from 1989 to 2000. This is a slice of the outermost layer of OPAL : the muon chambers. This outside layer detects particles which are not stopped by the previous layers. These are mostly muons.

  3. LEP Vacuum Chamber

    CERN Multimedia

    1983-01-01

    This is a cut-out of a LEP vacuum chamber for dipole magnets showing the beam channel and the pumping channel with the getter (NEG) strip and its insulating supports. A water pipe connected to the cooling channel can also be seen at the back.The lead radiation shield lining is also shown. See also 8305563X.

  4. Scanning bubble chamber pictures

    CERN Multimedia

    1974-01-01

    These were taken at the 2 m hydrogen bubble chamber. The photo shows an early Shiva system where the pre-measurements needed to qualify the event were done manually (cf photo 7408136X). The scanning tables were located in bld. 12. Gilberte Saulmier sits on foreground, Inge Arents at centre.

  5. Liquid Wall Chambers

    Energy Technology Data Exchange (ETDEWEB)

    Meier, W R

    2011-02-24

    The key feature of liquid wall chambers is the use of a renewable liquid layer to protect chamber structures from target emissions. Two primary options have been proposed and studied: wetted wall chambers and thick liquid wall (TLW) chambers. With wetted wall designs, a thin layer of liquid shields the structural first wall from short ranged target emissions (x-rays, ions and debris) but not neutrons. Various schemes have been proposed to establish and renew the liquid layer between shots including flow-guiding porous fabrics (e.g., Osiris, HIBALL), porous rigid structures (Prometheus) and thin film flows (KOYO). The thin liquid layer can be the tritium breeding material (e.g., flibe, PbLi, or Li) or another liquid metal such as Pb. TLWs use liquid jets injected by stationary or oscillating nozzles to form a neutronically thick layer (typically with an effective thickness of {approx}50 cm) of liquid between the target and first structural wall. In addition to absorbing short ranged emissions, the thick liquid layer degrades the neutron flux and energy reaching the first wall, typically by {approx}10 x x, so that steel walls can survive for the life of the plant ({approx}30-60 yrs). The thick liquid serves as the primary coolant and tritium breeding material (most recent designs use flibe, but the earliest concepts used Li). In essence, the TLW places the fusion blanket inside the first wall instead of behind the first wall.

  6. LEP vacuum chamber, prototype

    CERN Multimedia

    CERN PhotoLab

    1983-01-01

    Final prototype for the LEP vacuum chamber, see 8305170 for more details. Here we see the strips of the NEG pump, providing "distributed pumping". The strips are made from a Zr-Ti-Fe alloy. By passing an electrical current, they were heated to 700 deg C.

  7. Secondary emission gas chamber

    CERN Document Server

    In'shakov, V; Skvortsov, V

    2014-01-01

    For a hadron calorimeter active element there is considered a gaseous secondary emis-sion detector (150 micron gap, 50 kV/cm). Such one-stage parallel plate chamber must be a radiation hard, fast and simple. A model of such detector has been produced, tested and some characteristics are presented.

  8. A patient-specific quality assurance study on absolute dose verification using ionization chambers of different volumes in RapidArc treatments

    Energy Technology Data Exchange (ETDEWEB)

    Syam Kumar, S.A., E-mail: skppm@rediffmail.com [Department of Medical Physics, Cancer Institute (WIA), Adyar, Chennai, Tamil Nadu (India); Sukumar, Prabakar; Sriram, Padmanaban; Rajasekaran, Dhanabalan; Aketi, Srinu; Vivekanandan, Nagarajan [Department of Medical Physics, Cancer Institute (WIA), Adyar, Chennai, Tamil Nadu (India)

    2012-01-01

    The recalculation of 1 fraction from a patient treatment plan on a phantom and subsequent measurements have become the norms for measurement-based verification, which combines the quality assurance recommendations that deal with the treatment planning system and the beam delivery system. This type of evaluation has prompted attention to measurement equipment and techniques. Ionization chambers are considered the gold standard because of their precision, availability, and relative ease of use. This study evaluates and compares 5 different ionization chambers: phantom combinations for verification in routine patient-specific quality assurance of RapidArc treatments. Fifteen different RapidArc plans conforming to the clinical standards were selected for the study. Verification plans were then created for each treatment plan with different chamber-phantom combinations scanned by computed tomography. This includes Medtec intensity modulated radiation therapy (IMRT) phantom with micro-ionization chamber (0.007 cm{sup 3}) and pinpoint chamber (0.015 cm{sup 3}), PTW-Octavius phantom with semiflex chamber (0.125 cm{sup 3}) and 2D array (0.125 cm{sup 3}), and indigenously made Circular wax phantom with 0.6 cm{sup 3} chamber. The measured isocenter absolute dose was compared with the treatment planning system (TPS) plan. The micro-ionization chamber shows more deviations when compared with semiflex and 0.6 cm{sup 3} with a maximum variation of -4.76%, -1.49%, and 2.23% for micro-ionization, semiflex, and farmer chambers, respectively. The positive variations indicate that the chamber with larger volume overestimates. Farmer chamber shows higher deviation when compared with 0.125 cm{sup 3}. In general the deviation was found to be <1% with the semiflex and farmer chambers. A maximum variation of 2% was observed for the 0.007 cm{sup 3} ionization chamber, except in a few cases. Pinpoint chamber underestimates the calculated isocenter dose by a maximum of 4.8%. Absolute dose

  9. A patient-specific quality assurance study on absolute dose verification using ionization chambers of different volumes in RapidArc treatments.

    Science.gov (United States)

    Syam Kumar, S A; Sukumar, Prabakar; Sriram, Padmanaban; Rajasekaran, Dhanabalan; Aketi, Srinu; Vivekanandan, Nagarajan

    2012-01-01

    The recalculation of 1 fraction from a patient treatment plan on a phantom and subsequent measurements have become the norms for measurement-based verification, which combines the quality assurance recommendations that deal with the treatment planning system and the beam delivery system. This type of evaluation has prompted attention to measurement equipment and techniques. Ionization chambers are considered the gold standard because of their precision, availability, and relative ease of use. This study evaluates and compares 5 different ionization chambers: phantom combinations for verification in routine patient-specific quality assurance of RapidArc treatments. Fifteen different RapidArc plans conforming to the clinical standards were selected for the study. Verification plans were then created for each treatment plan with different chamber-phantom combinations scanned by computed tomography. This includes Medtec intensity modulated radiation therapy (IMRT) phantom with micro-ionization chamber (0.007 cm(3)) and pinpoint chamber (0.015 cm(3)), PTW-Octavius phantom with semiflex chamber (0.125 cm(3)) and 2D array (0.125 cm(3)), and indigenously made Circular wax phantom with 0.6 cm(3) chamber. The measured isocenter absolute dose was compared with the treatment planning system (TPS) plan. The micro-ionization chamber shows more deviations when compared with semiflex and 0.6 cm(3) with a maximum variation of -4.76%, -1.49%, and 2.23% for micro-ionization, semiflex, and farmer chambers, respectively. The positive variations indicate that the chamber with larger volume overestimates. Farmer chamber shows higher deviation when compared with 0.125 cm(3). In general the deviation was found to be <1% with the semiflex and farmer chambers. A maximum variation of 2% was observed for the 0.007 cm(3) ionization chamber, except in a few cases. Pinpoint chamber underestimates the calculated isocenter dose by a maximum of 4.8%. Absolute dose measurements using the semiflex

  10. SU-E-T-96: Demonstration of a Consistent Method for Correcting Surface Dose Measurements Using Both Solid State and Ionization Chamber Detectors

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, T; Gerbi, B; Higgins, P [UniversityMinnesota, Minneapolis, MN (United States)

    2014-06-01

    Purpose: To compare the surface dose (SD) measured using a PTW 30-360 extrapolation chamber with different commonly used dosimeters (Ds): parallel plate ion chambers (ICs): RMI-449 (Attix), Capintec PS-033, PTW 30-329 (Markus) and Memorial; TLD chips (cTLD), TLD powder (pTLD), optically stimulated (OSLs), radiochromic (EXR2) and radiographic (EDR2) films, and to provide an intercomparison correction to Ds for each of them. Methods: Investigations were performed for a 6 MV x-ray beam (Varian Clinac 2300, 10x10 cm{sup 2} open field, SSD = 100 cm). The Ds were placed at the surface of the solid water phantom and at the reference depth dref=1.7cm. The measurements for cTLD, OSLs, EDR2 and EXR2 were corrected to SD using an extrapolation method (EM) indexed to the baseline PTW 30-360 measurements. A consistent use of the EM involved: 1) irradiation of three Ds stacked on top of each other on the surface of the phantom; 2) measurement of the relative dose value for each layer; and, 3) extrapolation of these values to zero thickness. An additional measurement was performed with externally exposed OSLs (eOSLs), that were rotated out of their protective housing. Results: All single Ds measurements overestimated the SD compared with the extrapolation chamber, except for Attix IC. The closest match to the true SD was measured with the Attix IC (− 0.1%), followed by pTLD (0.5%), Capintec (4.5%), Memorial (7.3%), Markus (10%), cTLD (11.8%), eOSL (12.8%), EXR2 (14%), EDR2 (14.8%) and OSL (26%). The EM method of correction for SD worked well for all Ds, except the unexposed OSLs. Conclusion: This EM cross calibration of solid state detectors with an extrapolation or Attix chamber can provide thickness corrections for cTLD, eOSLs, EXR2, and EDR2. Standard packaged OSLs were not found to be simply corrected.

  11. A convolution model for obtaining the response of an ionization chamber in static non standard fields

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez-Castano, D. M.; Gonzalez, L. Brualla; Gago-Arias, M. A.; Pardo-Montero, J.; Gomez, F.; Luna-Vega, V.; Sanchez, M.; Lobato, R. [Radiation Physics Laboratory, Universidad de Santiago de Compostela, 15782 (Spain) and Dpto de Fisica de Particulas, Universidad de Santiago de Compostela, 15782 (Spain); Servicio de Radiofisica ERESA, Consorcio Hospital General Universitario de Valencia, 46014 (Spain); Dpto de Fisica de Particulas, Universidad de Santiago de Compostela, 15782 (Spain); Radiation Physics Laboratory, Universidad de Santiago de Compostela, 15782 Spain and Dpto de Fisica de Particulas, Universidad de Santiago de Compostela, 15782 (Spain); Servicio de Radiofisica y Proteccion Radiologica, Hospital Clinico Universitario de Santiago, Santiago de Compostela, 15782 (Spain)

    2012-01-15

    Purpose: This work contains an alternative methodology for obtaining correction factors for ionization chamber (IC) dosimetry of small fields and composite fields such as IMRT. The method is based on the convolution/superposition (C/S) of an IC response function (RF) with the dose distribution in a certain plane which includes chamber position. This method is an alternative to the full Monte Carlo (MC) approach that has been used previously by many authors for the same objective. Methods: The readout of an IC at a point inside a phantom irradiated by a certain beam can be obtained as the convolution of the dose spatial distribution caused by the beam and the IC two-dimensional RF. The proposed methodology has been applied successfully to predict the response of a PTW 30013 IC when measuring different nonreference fields, namely: output factors of 6 MV small fields, beam profiles of cobalt 60 narrow fields and 6 MV radiosurgery segments. The two-dimensional RF of a PTW 30013 IC was obtained by MC simulation of the absorbed dose to cavity air when the IC was scanned by a 0.6 x 0.6 mm{sup 2} cross section parallel pencil beam at low depth in a water phantom. For each of the cases studied, the results of the IC direct measurement were compared with the corresponding obtained by the C/S method. Results: For all of the cases studied, the agreement between the IC direct measurement and the IC calculated response was excellent (better than 1.5%). Conclusions: This method could be implemented in TPS in order to calculate dosimetry correction factors when an experimental IMRT treatment verification with in-phantom ionization chamber is performed. The miss-response of the IC due to the nonreference conditions could be quickly corrected by this method rather than employing MC derived correction factors. This method can be considered as an alternative to the plan-class associated correction factors proposed recently as part of an IAEA work group on nonstandard field dosimetry.

  12. Anechoic Radio Frequency Test Chamber

    Data.gov (United States)

    Federal Laboratory Consortium — This chamber is used for characterization test of such systems as communications gear, tanks, radar, missiles, and helicopters. The dimensions of the chamber are 114...

  13. Diversidad y origen geográfico del recurso vegetal en los huertos familiares de Quintana Roo, México

    Directory of Open Access Journals (Sweden)

    Jesus Kantún-Balam

    2015-08-01

    Full Text Available El huerto familiar (HF es un sistema agrícola que funciona como fuente de recursos naturales y sitio para el manejo y conservación de especies vegetales nativas e introducidas. Un ejemplo de su importancia se presenta en el área maya de la península de Yucatán, México. La conquista española es un aspecto fundamental en el desarrollo y evolución del HF, evento que favoreció la introducción de especies vegetales, lo que contribuyó a enriquecer y diversificar la flora del HF de la región. Actualmente, esta introducción es un proceso favorecido por la globalización comercial, fenómeno que ha generado cambios en el HF debido al abandono de las actividades del campo y a la búsqueda de recursos económicos fuera de éste. En la península de Yucatán se observa con mayor claridad en el estado de Quintana Roo, en donde el desarrollo socioeconómico ha favorecido que muchos campesinos mayas emigren de sus comunidades para buscar trabajo en las zonas turísticas. Para conocer el estado actual del recurso vegetal, se estudió la diversidad y origen geográfico de las especies vegetales presentes en el HF de Quintana Roo. Se caracterizaron 120 HF en tres regiones del estado: norte, maya y sur. Se registraron 449 especies correspondientes a 93 familias y 329 géneros. La familia mejor representada fue la Fabaceae con el 9.35% y el género mejor representado fueCitruscon el 2.0%. La región con mayor diversidad fue el norte (H’= 5,684. Las especies introducidas fueron principalmente de origen americano (65,8%. Recientemente, la globalización ha favorecido la introducción de especies de origen asiático, como el nim (Azadirachta indica y el rambután (Nephelium lappaceum. Esto muestra la importancia de este fenómeno en la riqueza y diversidad actual de los huertos familiares de Quintana Roo.

  14. roo Fahle majas (Tartu mnt. 84A, Tallinn) : Koger & Partnerid kontor / Lembit Andres Tork, Kristel Jakobson, Jaan F. Port

    Index Scriptorium Estoniae

    Tork, Lembit Andres

    2007-01-01

    plaan, 6 värv. vaadet; fotod: Aivo Kallas; kaasa töötasid J. F. Port ja K. Jakobson; L. A.Tork pälvis büroo sisekujunduse eest Eesti Sisearhitektide Liidu 2006. a. ajaloolise interjööri preemia

  15. roo Fahle majas (Tartu mnt. 84A, Tallinn) : Koger & Partnerid kontor / Lembit Andres Tork, Kristel Jakobson, Jaan F. Port

    Index Scriptorium Estoniae

    Tork, Lembit Andres

    2007-01-01

    plaan, 6 värv. vaadet; fotod: Aivo Kallas; kaasa töötasid J. F. Port ja K. Jakobson; L. A.Tork pälvis büroo sisekujunduse eest Eesti Sisearhitektide Liidu 2006. a. ajaloolise interjööri preemia

  16. GPUs for statistical data analysis in HEP: a performance study of GooFit on GPUs vs. RooFit on CPUs

    Science.gov (United States)

    Pompili, Alexis; Di Florio, Adriano; CMS Collaboration

    2016-10-01

    In order to test the computing capabilities of GPUs with respect to traditional CPU cores a high-statistics toy Monte Carlo technique has been implemented both in ROOT/RooFit and GooFit frameworks with the purpose to estimate the statistical significance of the structure observed by CMS close to the kinematical boundary of the Jψϕ invariant mass in the three-body decay B +→JψϕK +. GooFit is a data analysis open tool under development that interfaces ROOT/RooFit to CUDA platform on nVidia GPU. The optimized GooFit application running on GPUs hosted by servers in the Bari Tier2 provides striking speed-up performances with respect to the RooFit application parallelised on multiple CPUs by means of PROOF-Lite tool. The considerably resulting speed-up, while comparing concurrent GooFit processes allowed by CUDA Multi Process Service and a RooFit/PROOF-Lite process with multiple CPU workers, is presented and discussed in detail. By means of GooFit it has also been possible to explore the behaviour of a likelihood ratio test statistic in different situations in which the Wilks Theorem may apply or does not apply because its regularity conditions are not satisfied.

  17. Valoración no monetaria de unidades de paisaje en la zona maya de Quintana Roo, México

    Directory of Open Access Journals (Sweden)

    Karla Diana Infante-Ramírez

    2014-01-01

    Full Text Available El objetivo de esta investigación es conocer el valor local del paisaje en ejidos de la zona maya de Quintana Roo. Se utilizó un método de valoración no-monetaria, el cual se basa tanto en la opinión de grupos comunitarios como de expertos académicos. Además, se apoyó en la observación participante, entrevistas a fondo y talleres comunitarios. Los resultados muestran que, en opinión de los entrevistados, el monte alto fue la unidad de paisaje más valorada y la sabana la menos valorada. Lo anterior coincide con el potencial que tienen las unidades para satisfacer las necesidades de subsistencia de las comunidades mayas estudiadas.

  18. Introduction of coconut palm nectar with value added in the tourism región of Quintana Roo

    Directory of Open Access Journals (Sweden)

    Félix Rogelio Flores

    2008-03-01

    Full Text Available The coconut palm as consumption product has in other regions of the world an impact that could generate opportunities of economic growth in our country. To generate strategies of production, consumption and permanence of the coconut palm in the market, is a proposal that arises within the framework that INIFAP and Universidad de Colima and the School of Marketing beginning in 2006 up to this days. Through this document, is developing the main characteristics of the coconut palm, a proposal of standardization in the process of elaboration and pop marketing from the experiences obtained in Quintana Roo INIFAP research center and the marketing’s knowledge. Also are explained the processes which must be carried out for a similar process in any coconut region of Mexican country. This report is concluded with a model of competitiveness for the commercialization of the coconut palm.

  19. Using Landsat 5 TM Data to Identify and Map Areas of Mangrove in Tulum, Quintana Roo, Mexico

    Science.gov (United States)

    Meachum, Samuel Standish

    Mangroves are recognized worldwide as a major ecosystem that provides significant ecosystem services. They are threatened due to rising pressures from human overpopulation and economic development. The Caribbean Coast of Mexico's Yucatan Peninsula contains mangrove habitat that have been negatively impacted by the development of the region's tourist industry. However, little research has been done to map and quantify the extent of mangrove in the region. This study used remote sensing techniques to identify mangrove in the Municipality of Tulum located in Quintana Roo, and to produce an accurate vector based thematic map that inventories these areas. Anatomical differences were analyzed and related to high-resolution field spectral data for each mangrove species. A vector map of mangrove habitat, including areas of inland mangrove, was produced with an overall accuracy of 88%. The 19,262 ha. of mangrove identified by this study represents a 140% increase in area over previous studies.

  20. Valoración no monetaria de unidades de paisaje en la zona maya de Quintana Roo, México

    OpenAIRE

    Karla Diana Infante-Ramírez; Ana Minerva Arce-Ibarra; Eduardo Bello-Baltazar

    2014-01-01

    El objetivo de esta investigación es conocer el valor local del paisaje en ejidos de la zona maya de Quintana Roo. Se utilizó un método de valoración no-monetaria, el cual se basa tanto en la opinión de grupos comunitarios como de expertos académicos. Además, se apoyó en la observación participante, entrevistas a fondo y talleres comunitarios. Los resultados muestran que, en opinión de los entrevistados, el monte alto fue la unidad de paisaje más valorada y la sabana la menos valorada. Lo ant...

  1. Tenure, tourism and timber in Quintana Roo, Mexico: Land tenure changes in forest Ejidos after agrarian reforms

    Directory of Open Access Journals (Sweden)

    James A. Barsimantov

    2009-09-01

    Full Text Available We present and apply an analytical framework for understanding land tenure change in the wake of radical land policy modifications in Mexico’s communal tenure system. We posit that the changes in land tenure vary as a result of a complex interplay of drivers external and internal to the land tenure unit. Using interview and socio-economic data, we apply this framework to six ejidos in Quintana Roo, Mexico in order to understand the extent to which these ejidos have shifted towards private individual property as promoted in the 1992 amendment of Article 27 of the Mexican Constitution. In our case study ejidos, we conclude that external factors, including community forestry, tourism, and urbanization, have synergized with factors internal to the ejido, such as ethnicity, livelihood strategies, migration, and attitudes, leading to different trajectories in land tenure arrangements.

  2. Concepciones culturales, género y migración entre mayas yucatecos en Cancún, Quintana Roo

    Directory of Open Access Journals (Sweden)

    Adriana Leona Rosales Mendoza

    2009-01-01

    Full Text Available Este artículo presenta algunos elementos que contribuyen a mantener la memoria cultural en mayas peninsulares inmigrantes en Cancún, Quintana Roo. Refiero algunas concepciones culturales (rituales, leyendas y concepciones que permiten a inmigrantes de esta etnia continuar reproduciendo y perpetuando su sentido de pertenencia étnica en ese polo turístico. Los testimonios que se presentan corresponden a cinco entrevistas efectuadas con mujeres procedentes del oriente del estado de Yucatán (X-Can, Temax, Espita, Tunkás, Dzitás, Chemax y Valladolid durante el proceso de investigación para elaborar mi tesis de doctorado. Las reflexiones para la elaboración de este artículo surgieron en el proceso de dicha investigación y en observaciones de campo posteriores, en las cuales fue posible profundizar en relatos sobre los rituales de chaa chac y hetz-mek, la leyenda Xtabay, el sentido conferido al corazón, y la denominada "metáfora de los ojos de venado".This article presents elements of symbolic discourse that contribute to the maintenance of cultural memory in Peninsular Mayan immigrants to Cancun, Quintana Roo, Mexico. I refer to certain (rituals, legends and conceptions that allow immigrants of this ethnicity to continue reproducing and perpetuating their sense of being Mayan in Cancun, a city which is a magnet for national and international tourism. The testimonies presented are taken from five interviews carried out with women from the eastern part of Yucatan (X-Can, Temax, Espita, Tunkas, Dzitas, Chemax and Valladolid, carried out during research for my doctoral dissertation. The reflections for this article emerged from this research process and later field observations, in which it was possible to explore further the narratives about the chaa chac and hetz-mek rituals, the Xtabay legend, the meaning placed on the heart and the metaphor I have named "deer eyes".

  3. Investigation of correction factors for non-reference conditions in ion chamber photon dosimetry with Monte-Carlo simulations

    Energy Technology Data Exchange (ETDEWEB)

    Wulff, Joerg [Klinik fuer Strahlendiagnostik, Medizinisches Zentrum fuer Radiologie, Philipps Univ. Marburg (Germany); Inst. fuer Medizinische Physik und Strahlenschutz (IMPS), Fachhochschule Giessen-Friedberg (Germany); Heverhagen, Johannes T. [Klinik fuer Strahlendiagnostik, Medizinisches Zentrum fuer Radiologie, Philipps Univ. Marburg (Germany); Karle, Heiko [Klinik und Poliklinik fuer Radioonkologie sowie Strahlentherapie, Universitaetsmedizin der Johannes Gutenberg-Univ., Mainz (Germany); Zink, Klemens [Inst. fuer Medizinische Physik und Strahlenschutz (IMPS), Fachhochschule Giessen-Friedberg (Germany)

    2010-07-01

    Current dosimetry protocols require geometrical reference conditions for the determination of absorbed dose in external radiotherapy. Whenever these geometrical conditions cannot be maintained the application of additional corrections becomes necessary, in principle. The current DIN6800-2 protocol includes a corresponding factor k{sub NR}, but numerical values are lacking and no definite information about the magnitude of this correction is available yet. This study presents Monte-Carlo based calculations within the 6 MV-X photon field of a linear accelerator for a common used ion chamber (PTW31010) employing the EGSnrc code system. The linear accelerator model was matched to measurements, showing good agreement and is used as a realistic source. The individual perturbation correction factors as well as the resulting correction factor k{sub NR} were calculated as a function of depth for three field sizes, as a function of central axis distance for the largest field and within the build-up region. The behaviour of the ion chamber was further investigated for an idealized hypothetical field boundary. Within the field of the linear accelerator where charged particle equilibrium is achieved the factor k{sub NR} was generally below {proportional_to}0.5%. In the build-up region a depth dependent correction of up to 2% was calculated when positioning the chamber according to DIN6800-2. Minimizing the depth dependence of the corrections in the build-up region lead to a slightly different positioning of the ion chamber as currently recommended. In regions of the hypothetical field boundary with missing charged particle equilibrium and high dose gradients, the ion chamber response changed by up to {proportional_to}40%, caused by the comparatively large volume (0.125 cm{sup 3}) of the investigated chamber. (orig.)

  4. Estimation of absorbed dose in clinical radiotherapy linear accelerator beams: Effect of ion chamber calibration and long-term stability.

    Science.gov (United States)

    Ravichandran, Ramamoorthy; Binukumar, Johnson Pichy; Davis, Cheriyathmanjiyil Antony

    2013-10-01

    The measured dose in water at reference point in phantom is a primary parameter for planning the treatment monitor units (MU); both in conventional and intensity modulated/image guided treatments. Traceability of dose accuracy therefore still depends mainly on the calibration factor of the ion chamber/dosimeter provided by the accredited Secondary Standard Dosimetry Laboratories (SSDLs), under International Atomic Energy Agency (IAEA) network of laboratories. The data related to Nd,water calibrations, thermoluminescent dosimetry (TLD) postal dose validation, inter-comparison of different dosimeter/electrometers, and validity of Nd,water calibrations obtained from different calibration laboratories were analyzed to find out the extent of accuracy achievable. Nd,w factors in Gray/Coulomb calibrated at IBA, GmBH, Germany showed a mean variation of about 0.2% increase per year in three Farmer chambers, in three subsequent calibrations. Another ion chamber calibrated in different accredited laboratory (PTW, Germany) showed consistent Nd,w for 9 years period. The Strontium-90 beta check source response indicated long-term stability of the ion chambers within 1% for three chambers. Results of IAEA postal TL "dose intercomparison" for three photon beams, 6 MV (two) and 15 MV (one), agreed well within our reported doses, with mean deviation of 0.03% (SD 0.87%) (n = 9). All the chamber/electrometer calibrated by a single SSDL realized absorbed doses in water within 0.13% standard deviations. However, about 1-2% differences in absorbed dose estimates observed when dosimeters calibrated from different calibration laboratories are compared in solid phantoms. Our data therefore imply that the dosimetry level maintained for clinical use of linear accelerator photon beams are within recommended levels of accuracy, and uncertainties are within reported values.

  5. Vacuum Chambers for LEP sections

    CERN Multimedia

    1983-01-01

    The picture shows sections of the LEP vacuum chambers to be installed in the dipole magnets (left) and in the quadrupoles (right). The dipole chamber has three channels: the beam chamber, the pumping duct where the NEG (non-evaporabe getter) is installed and the water channel for cooling (on top in the picture). The pumping duct is connected to the beam chamber through holes in the separating wall. The thick lead lining to shield radiation can also be seen. These chambers were manufactured as extruded aluminium alloy profiles.

  6. Multi-anode ionization chamber

    Energy Technology Data Exchange (ETDEWEB)

    Bolotnikov, Aleksey E. (South Setauket, NY); Smith, Graham (Port Jefferson, NY); Mahler, George J. (Rocky Point, NY); Vanier, Peter E. (Setauket, NY)

    2010-12-28

    The present invention includes a high-energy detector having a cathode chamber, a support member, and anode segments. The cathode chamber extends along a longitudinal axis. The support member is fixed within the cathode chamber and extends from the first end of the cathode chamber to the second end of the cathode chamber. The anode segments are supported by the support member and are spaced along the longitudinal surface of the support member. The anode segments are configured to generate at least a first electrical signal in response to electrons impinging thereon.

  7. Verification of absorbed dose rates in reference beta radiation fields: measurements with an extrapolation chamber and radiochromic film

    Energy Technology Data Exchange (ETDEWEB)

    Reynaldo, S. R. [Development Centre of Nuclear Technology, Posgraduate Course in Science and Technology of Radiations, Minerals and Materials / CNEN, Av. Pte. Antonio Carlos 6627, 31270-901 Belo Horizonte, Minas Gerais (Brazil); Benavente C, J. A.; Da Silva, T. A., E-mail: sirr@cdtn.br [Development Centre of Nuclear Technology / CNEN, Av. Pte. Antonio Carlos 6627, 31270-901 Belo Horizonte, Minas Gerais (Brazil)

    2015-10-15

    Beta Secondary Standard 2 (Bss 2) provides beta radiation fields with certified values of absorbed dose to tissue and the derived operational radiation protection quantities. As part of the quality assurance, metrology laboratories are required to verify the reliability of the Bss-2 system by performing additional verification measurements. In the CDTN Calibration Laboratory, the absorbed dose rates and their angular variation in the {sup 90}Sr/{sup 90}Y and {sup 85}Kr beta radiation fields were studied. Measurements were done with a 23392 model PTW extrapolation chamber and with Gafchromic radiochromic films on a PMMA slab phantom. In comparison to the certificate values provided by the Bss-2, absorbed dose rates measured with the extrapolation chamber differed from -1.4 to 2.9% for the {sup 90}Sr/{sup 90}Y and -0.3% for the {sup 85}Kr fields; their angular variation showed differences lower than 2% for incidence angles up to 40-degrees and it reached 11% for higher angles, when compared to ISO values. Measurements with the radiochromic film showed an asymmetry of the radiation field that is caused by a misalignment. Differences between the angular variations of absorbed dose rates determined by both dosimetry systems suggested that some correction factors for the extrapolation chamber that were not considered should be determined. (Author)

  8. Characterization of recombination effects in a liquid ionization chamber used for the dosimetry of a radiosurgical accelerator.

    Science.gov (United States)

    Wagner, Antoine; Crop, Frederik; Lacornerie, Thomas; Reynaert, Nick

    2014-05-09

    Most modern radiation therapy devices allow the use of very small fields, either through beamlets in Intensity-Modulated Radiation Therapy (IMRT) or via stereotactic radiotherapy where positioning accuracy allows delivering very high doses per fraction in a small volume of the patient. Dosimetric measurements on medical accelerators are conventionally realized using air-filled ionization chambers. However, in small beams these are subject to nonnegligible perturbation effects. This study focuses on liquid ionization chambers, which offer advantages in terms of spatial resolution and low fluence perturbation. Ion recombination effects are investigated for the microLion detector (PTW) used with the Cyberknife system (Accuray). The method consists of performing a series of water tank measurements at different source-surface distances, and applying corrections to the liquid detector readings based on simultaneous gaseous detector measurements. This approach facilitates isolating the recombination effects arising from the high density of the liquid sensitive medium and obtaining correction factors to apply to the detector readings. The main difficulty resides in achieving a sufficient level of accuracy in the setup to be able to detect small changes in the chamber response.

  9. The APS ceramic chambers

    Energy Technology Data Exchange (ETDEWEB)

    Milton, S.; Warner, D.

    1994-07-01

    Ceramics chambers are used in the Advanced Photon Source (APS) machines at the locations of the pulsed kicker and bumper magnets. The ceramic will be coated internally with a resistive paste. The resistance is chosen to allow the low frequency pulsed magnet field to penetrate but not the high frequency components of the circulating beam. Another design goal was to keep the power density experienced by the resistive coating to a minimum. These ceramics, their associated hardware, the coating process, and our recent experiences with them are described.

  10. Council Chamber exhibition

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    To complete the revamp of CERN’s Council Chamber, a new exhibition is being installed just in time for the June Council meetings.   Panels will showcase highlights of CERN’s history, using some of the content prepared for the exhibitions marking 50 years of the PS, which were displayed in the main building last November. The previous photo exhibition in the Council Chamber stopped at the 1970s. To avoid the new panels becoming quickly out of date, photos are grouped together around specific infrastructures, rather than following a classic time-line. “We have put the focus on the accelerators – the world-class facilities that CERN has been offering researchers over the years, from the well-known large colliders to the lesser-known smaller facilities,” says Emma Sanders, who worked on the content. The new exhibition will be featured in a future issue of the Bulletin with photos and an interview with Fabienne Marcastel, designer of the exhibit...

  11. Mush Column Magma Chambers

    Science.gov (United States)

    Marsh, B. D.

    2002-12-01

    Magma chambers are a necessary concept in understanding the chemical and physical evolution of magma. The concept may well be similar to a transfer function in circuit or time series analysis. It does what needs to be done to transform source magma into eruptible magma. In gravity and geodetic interpretations the causative body is (usually of necessity) geometrically simple and of limited vertical extent; it is clearly difficult to `see' through the uppermost manifestation of the concentrated magma. The presence of plutons in the upper crust has reinforced the view that magma chambers are large pots of magma, but as in the physical representation of a transfer function, actual magma chambers are clearly distinct from virtual magma chambers. Two key features to understanding magmatic systems are that they are vertically integrated over large distances (e.g., 30-100 km), and that all local magmatic processes are controlled by solidification fronts. Heat transfer considerations show that any viable volcanic system must be supported by a vertically extensive plumbing system. Field and geophysical studies point to a common theme of an interconnected stack of sill-like structures extending to great depth. This is a magmatic Mush Column. The large-scale (10s of km) structure resembles the vertical structure inferred at large volcanic centers like Hawaii (e.g., Ryan et al.), and the fine scale (10s to 100s of m) structure is exemplified by ophiolites and deeply eroded sill complexes like the Ferrar dolerites of the McMurdo Dry Valleys, Antarctica. The local length scales of the sill reservoirs and interconnecting conduits produce a rich spectrum of crystallization environments with distinct solidification time scales. Extensive horizontal and vertical mushy walls provide conditions conducive to specific processes of differentiation from solidification front instability to sidewall porous flow and wall rock slumping. The size, strength, and time series of eruptive behavior

  12. Measurement of electron blockage factors for mamma scars; Medida de los factores de bloque de electrones para cicatrices de mama

    Energy Technology Data Exchange (ETDEWEB)

    Marques Fraguela, E.; Suero Rodrigo, M. A.

    2011-07-01

    Pencil Beam algorithm XiO CMS scheduler uses the applicator factor, instead of blocking factor in the calculation of monitor units (MU) shaped electron fields. This feature makes the algorithm for calculating an input field the same dose in the beam axis than it would if it were not blocked. It should, therefore, to correct the UM that provides the planner by a factor. The blocks used in electron treatment of the surgical mamma cancers often have a narrow elongated shape following the contour of the scar. Such openings have difficulty measuring the blocking factor with plane-parallel chambers recommended by national and international protocols (eg PTW Roos 34 001) as being so narrow that sometimes the camera is not completely irradiated. In this paper, we study the possibility of using a PTW 30010 Farmer cylindrical chamber for measuring the blocking factor of such openings.

  13. The ALICE time projection chamber

    CERN Multimedia

    Maximilien Brice

    2005-01-01

    This time projection chamber is part of the ALICE detector on the new LHC accelerator at CERN. Particles produced in collisions at the core of the detector will follow paths outward through the various sub-detector layers. If these particles carry a charge, they will ionise the gas contained within this chamber producing an electric signal as the ions drift in the chamber's electric field.

  14. El simbolismo de consumo de las plantas aromáticas albahaca y ruda en los servicios turísticos alternativos en Tulum (Quintana Roo, México)

    National Research Council Canada - National Science Library

    Valeria Betzabé Cuevas Albarrán; Judith Cavazos Arroyo

    2016-01-01

    ... simbólica y cultural, y la caracterización de los consumidores, que se identi can como los prestadores de servicios alternativos de salud de la albahaca y la ruda en Tulum (Quintana Roo, México...

  15. Comparison of dosimeter response: ionization chamber, TLD, and Gafchromic EBT2 film in 3D-CRT, IMRT, and SBRT techniques for lung cancer

    Science.gov (United States)

    Fitriandini, A.; Wibowo, W. E.; Pawiro, S. A.

    2016-03-01

    This research was conducted by measuring point dose in the target area (lungs), heart, and spine using four dosimeters (PTW N30013, Exradin A16, TLD, and the Gafchromic EBT2 film). The measurement was performed in CIRS 002LFC thorax phantom. The main objective of this study was to compare the dosimetry of those different systems. Dose measurements performed only in a single fraction of irradiation. The measurements result shown that TLD has the least accuracy and precision. As the effect of volume averaging, ionization chamber reaches the discrepancy value up to -13.30% in the target area. EBT2 film has discrepancy value of <1% in the 3D-CRT and IMRT techniques. This dosimeter is proposed to be an appropriate alternative dosimeter to be used at point dose verification.

  16. Abundancia y tallas de Menippe mercenaria (Crustacea: Brachyura, en refugios artificiales en Quintana Roo, México

    Directory of Open Access Journals (Sweden)

    Adrián Cervantes-Martínez

    2001-12-01

    Full Text Available En Florida y Cuba el cangrejo moro Menippe mercenaria (Say, 1818 se encuentra sometido a fuertes presiones de pesca; sin embargo en el Caribe Mexicano se considera como un recurso subexplotado. Debido a que existen pocas evaluaciones del cangrejo como un recurso alternativo en la región, se emplearon hábitats artificiales ("condominios cubanos", considerando tres temporadas de muestreo y cuatro sectores con el propósito de conocer la abundancia relativa, estructura de tallas, relación entre la longitud de quela-ancho del carapacho y aspectos poblacionales de estos organismos en la Bahía de la Ascensión, Quintana Roo, México. La abundancia varió de acuerdo a la estación y temporada de muestreo: el sector sur de la bahía y la temporada de nortes (enero a marzo presentaron la mayor abundancia relativa. La amplitud del carapacho fue directamente proporcional a la longitud de la quela (r² = 0.83, 0.97 y 0.89, pIn Florida and Cuba the stone crab Menippe mercenaria (Say, 1818 is under strong fishing-pressure; nevertheless in the Mexican Caribbean it is considered as sub-utilized and poorly known resource. Artificial shelters ("condominios cubanos" were used to study relative abundance, age structure, claw length-carapace amplitude relation, and population in three seasons and four sectors at Bahia Ascension, Quintana Roo, Mexico. The abundance varied according to the sector and sampling season: population was higher in the south and during the north wind ("Nortes" season (January to March. The carapace amplitude was directly proportional to claw length (r² = 0.83, 0.97 and 0.89; p< 0.05 in females, males and total, respectively. The results sugest that specimens with 37.5 and 67.5 mm of carapace amplitude are the most limited regarding refuge availability in the Bay

  17. Transferencias Monetarias Condicionadas en la estructura del ingreso de pueblos mayas de México: Jose Maria Morelos y Saban, Quintana Roo

    Directory of Open Access Journals (Sweden)

    Miguel Ángel Barrera Rojas

    2015-01-01

    Full Text Available Este artículo señala el papel que las transferencias monetarias condicionadas tienen en la estructura del ingreso en comunidades indígenas mayas de Quintana Roo. En la primera parte se analizan conceptos fundamentales sobre el pro - grama Oportunidades , mismo que representa el mayor programa de transferencias monetarias condicionadas en México, y posteriormente se analiza, mediante herramientas cuantitativas, la estructura del ingreso en dos comunidades indígenas del municipio José María Morelos en Quintana Roo, México para 2011. Finalmente se hacen recomendaciones de política pública para mejorar programas de este corte.

  18. Percepción social para la implementación de un proyecto de turismo cultural en la comunidad de Sacalaca, Quintana Roo

    Directory of Open Access Journals (Sweden)

    Valeria Betzabé Cuevas Albarrán

    2016-01-01

    Full Text Available El desarrollo de actividades económicas en la mayoría de las comunidades rurales de Quintana Roo está condicionado por las características del entorno ambiental, así como por la infraestructura disponible. Al presentar características prístinas que permiten el aprovechamiento del turismo cultural, se realizó una evaluación para determinar la percepción de las comunidades aledañas a Sacalaca, Quintana Roo, con el objeto de identificar el interés en adoptar esta estrategia de empresa sustentable en torno a esta modalidad turística. El proceso consistió en la aplicación de cuestionarios cerrados a nueve comunidades vecinas en donde se identificó una percepción positiva al ser considerado el turismo cultural como una fuente de empleos y generación de ingresos.

  19. The Big European Bubble Chamber

    CERN Multimedia

    1977-01-01

    The 3.70 metre Big European Bubble Chamber (BEBC), dismantled on 9 August 1984. During operation it was one of the biggest detectors in the world, producing direct visual recordings of particle tracks. 6.3 million photos of interactions were taken with the chamber in the course of its existence.

  20. Development of Fission Chamber Assembly

    Institute of Scientific and Technical Information of China (English)

    YANGJinwei; ZHANGWei; SONGXianying; LIXu

    2003-01-01

    The fission chambers which are gas counters with fissile material inside chamber,provide essential information for plasma opcharacteristics. In conjunction with the neutron flux monitor system these provide time-resolved measurements of the global neutron source strength and fusion power from thermal nuclear fusion reactor as ITER for all plasma conditions for which neutrons are produced.

  1. SU-E-T-17: A Mathematical Model for PinPoint Chamber Correction in Measuring Small Fields

    Energy Technology Data Exchange (ETDEWEB)

    Li, T; Zhang, Y; Li, X; Heron, D.E.; Huq, M.Saiful [University of Pittsburgh Medical Center, Pittsburgh, PA (United States)

    2014-06-01

    Purpose: For small field dosimetry, such as measuring the cone output factor for stereotactic radiosurgery, ion chambers often result in underestimation of the dose, due to both the volume averaging effect and the lack of electron equilibrium. The purpose of this work is to develop a mathematical model, specifically for the pinpoint chamber, to calculate the correction factors corresponding to different type of small fields, including single cone-based circular field and non-standard composite fields. Methods: A PTW 0.015cc PinPoint chamber was used in the study. Its response in a certain field was modeled as the total contribution of many small beamlets, each with different response factor depending on the relative strength, radial distance to the chamber axis, and the beam angle. To get these factors, 12 cone-shaped circular fields (5mm,7.5mm, 10mm, 12.5mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 60mm) were irradiated and measured with the PinPoint chamber. For each field size, hundreds of readings were recorded for every 2mm chamber shift in the horizontal plane. These readings were then compared with the theoretical doses as obtained with Monte Carlo calculation. A penalized-least-square optimization algorithm was developed to find out the beamlet response factors. After the parameter fitting, the established mathematical model was validated with the same MC code for other non-circular fields. Results: The optimization algorithm used for parameter fitting was stable and the resulted response factors were smooth in spatial domain. After correction with the mathematical model, the chamber reading matched with the Monte Carlo calculation for all the tested fields to within 2%. Conclusion: A novel mathematical model has been developed for the PinPoint chamber for dosimetric measurement of small fields. The current model is applicable only when the beam axis is perpendicular to the chamber axis. It can be applied to non-standard composite fields. Further

  2. National Ignition Facility Target Chamber

    Energy Technology Data Exchange (ETDEWEB)

    Wavrik, R W; Cox, J R; Fleming, P J

    2000-10-05

    On June 11, 1999 the Department of Energy dedicated the single largest piece of the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL) in Livermore, California. The ten (10) meter diameter aluminum target high vacuum chamber will serve as the working end of the largest laser in the world. The output of 192 laser beams will converge at the precise center of the chamber. The laser beams will enter the chamber in two by two arrays to illuminate 10 millimeter long gold cylinders called hohlraums enclosing 2 millimeter capsule containing deuterium, tritium and isotopes of hydrogen. The two isotopes will fuse, thereby creating temperatures and pressures resembling those found only inside stars and in detonated nuclear weapons, but on a minute scale. The NIF Project will serve as an essential facility to insure safety and reliability of our nation's nuclear arsenal as well as demonstrating inertial fusion's contribution to creating electrical power. The paper will discuss the requirements that had to be addressed during the design, fabrication and testing of the target chamber. A team from Sandia National Laboratories (SNL) and LLNL with input from industry performed the configuration and basic design of the target chamber. The method of fabrication and construction of the aluminum target chamber was devised by Pitt-Des Moines, Inc. (PDM). PDM also participated in the design of the chamber in areas such as the Target Chamber Realignment and Adjustment System, which would allow realignment of the sphere laser beams in the event of earth settlement or movement from a seismic event. During the fabrication of the target chamber the sphericity tolerances had to be addressed for the individual plates. Procedures were developed for forming, edge preparation and welding of individual plates. Construction plans were developed to allow the field construction of the target chamber to occur parallel to other NIF construction activities. This

  3. The CLEO III drift chamber

    CERN Document Server

    Peterson, D; Briere, R A; Chen, G; Cronin-Hennessy, D; Csorna, S; Dickson, M; Dombrowski, S V; Ecklund, K M; Lyon, A; Marka, S; Meyer, T O; Patterson, J R; Sadoff, A; Thies, P; Thorndike, E H; Urner, D

    2002-01-01

    The CLEO group at the Cornell Electron Storage Ring has constructed and commissioned a new central drift chamber. With 9796 cells arranged in 47 layers ranging in radius from 13.2 to 79 cm, the new drift chamber has a smaller outer radius and fewer wires than the drift chamber it replaces, but allows the CLEO tracking system to have improved momentum resolution. Reduced scattering material in the chamber gas and in the inner skin separating the drift chamber from the silicon vertex detector provides a reduction of the multiple scattering component of the momentum resolution and an extension of the usable measurement length into the silicon. Momentum resolution is further improved through quality control in wire positioning and symmetry of the electric fields in the drift cells which have provided a reduction in the spatial resolution to 88 mu m (averaged over the full drift range).

  4. Ion chamber based neutron detectors

    Science.gov (United States)

    Derzon, Mark S; Galambos, Paul C; Renzi, Ronald F

    2014-12-16

    A neutron detector with monolithically integrated readout circuitry, including: a bonded semiconductor die; an ion chamber formed in the bonded semiconductor die; a first electrode and a second electrode formed in the ion chamber; a neutron absorbing material filling the ion chamber; and the readout circuitry which is electrically coupled to the first and second electrodes. The bonded semiconductor die includes an etched semiconductor substrate bonded to an active semiconductor substrate. The readout circuitry is formed in a portion of the active semiconductor substrate. The ion chamber has a substantially planar first surface on which the first electrode is formed and a substantially planar second surface, parallel to the first surface, on which the second electrode is formed. The distance between the first electrode and the second electrode may be equal to or less than the 50% attenuation length for neutrons in the neutron absorbing material filling the ion chamber.

  5. Detecting MLC errors in stereotactic radiotherapy plans with a liquid filled ionization chamber array.

    Science.gov (United States)

    O'Connor, Patrick; Seshadri, Venkatakrisnan; Charles, Paul

    2016-03-01

    Quality assurance of stereotactic radiotherapy demands the use of equipment with the highest resolution and sensitivity available. This study examines the sensitivity of a commercially available liquid-filled ionization chamber array--the Octavius 1000 SRS (PTW, Frieburg, Germany) for detecting small (sub-millimetre) multi-leaf collimator (MLC) alignment errors in static square fields (side length 16-40 mm). Furthermore, the effectiveness of detecting small MLC errors in clinical stereotactic radiotherapy patient plans using the device was also evaluated. The commonly used gamma pass rate metric (of the measurements compared with treatment planning system generated results) was used. The gamma pass rates were then evaluated as a function of MLC position error (MLC error size 0.1-2.5 mm). The detector array exhibited a drop in pass rate between plans without error and those which had MLC errors induced. For example a drop in pass rate of 4.5% (gamma criteria 3%, 1 mm) was observed when a 0.8 mm error was introduced into a 16 mm square field. Furthermore the drop in pass rate increased as the MLC position error increased. This study showed that the Octavius 1000 SRS array could be a useful tool for applications requiring the detection of small geometric delivery uncertainties.

  6. Dosimetric Calibration of CT Pencil Chamber in Cobalt Beams%用60Co射线校准CT电离室的研究

    Institute of Scientific and Technical Information of China (English)

    李懿; 王军良; 王运来

    2014-01-01

    目的探讨CT电离室用60Co射线进行剂量长度乘积刻度的方法。方法 PTW TM30009 CT电离室放在T40017头部模体中心插孔中,用20 cm×20 cm 60Co射线照射60 s,用UNIDOS剂量仪测量电荷量。相同条件下TM300130.6 mL电离室测量吸收剂量。CT电离室的刻度因子用剂量长度乘积表示。同时测量CT电离室在MV级辐射场中的剂量线性和剂量响应均匀性。结果 CT电离室的剂量-长度刻度因子可以从测量数据计算得到。电离室的剂量线性和剂量响应的均匀性很好。结论用60Co射线进行吸收剂量刻度后,CT电离室可以用于MVCT设备的CT剂量指数测量。%Objective To explore the dose-length product calibration method for pencil ionization chamber in cobalt beams. Methods The PTW TM30009 ionization chamber was placed into the central hole of T40017 head phantom and irradiated 60 s in 20 cm×20 cm cobalt beam. The charge was col ected with UNIDOS electrometer. Absorbed doses were measured with TM30013 0.6 mL farmer-type chamber under the same condition. The CT chamber calibration factor was expressed in dose-length product. Dose linearity and spatial response were also investigated. Results The calibration factor in dose-length product was derived from measured data. Dose linearity and spatial response were good in cobalt beams. Conclusion It is feasible to calibrate the CT chamber in cobalt beams for patient dose evaluation in MVCT.

  7. Monte Carlo correction factors for a Farmer 0.6 cm{sup 3} ion chamber dose measurement in the build-up region of the 6 MV clinical beam

    Energy Technology Data Exchange (ETDEWEB)

    Pena, J [Departamento de Fisica de PartIculas, Universidade de Santiago de Compostela, Santiago de Compostela (Spain); Sanchez-Doblado, F [Hospital Universitario Virgen Macarena, RadioFisica, Sevilla (Spain); Departamento de FisiologIa y BioFisica, Facultad de Medicina, Universidad de Sevilla (Spain); Capote, R [International Atomic Energy Agency, Nuclear Data Section, Vienna (Austria); Terron, J A [Hospital Universitario Virgen Macarena, RadioFisica, Sevilla (Spain); Departamento de FisiologIa y BioFisica, Facultad de Medicina, Universidad de Sevilla (Spain); Gomez, F [Departamento de Fisica de PartIculas, Universidade de Santiago de Compostela, Santiago de Compostela (Spain)

    2006-03-21

    Reference dosimetry of photon fields is a well-established subject and currently available protocols (such as the IAEA TRS-398 and AAPM TG-51) provide methods for converting the ionization chamber (IC) reading into dose to water, provided reference conditions of charged particle equilibrium (CPE) are fulfilled. But these protocols cannot deal with the build-up region, where the lack of CPE limits the applicability of the cavity theorems and so the chamber correction factors become depth dependent. By explicitly including the IC geometry in the Monte Carlo simulations, depth-dependent dose correction factors are calculated for a PTW 30001 0.6 cm{sup 3} ion chamber in the build-up region of the 6 MV photon beam. The corrected percentage depth dose (PDD) agrees within 2% with that measured using the NACP 02 plane-parallel ion chamber in the build-up region at depths greater than 0.4 cm, where the Farmer chamber wall reaches the phantom surface.

  8. The multigap resistive plate chamber

    Energy Technology Data Exchange (ETDEWEB)

    Zeballos, E. Cerron [European Organization for Nuclear Research (CERN), Geneva (Switzerland); World Lab., Lausanne (Switzerland); Crotty, I. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Hatzifotiadou, D. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); World Lab., Lausanne (Switzerland); Valverde, J. Lamas [European Organization for Nuclear Research (CERN), Geneva (Switzerland); World Lab., Lausanne (Switzerland); Univ. Louis Pasteur, Strasbourg (France); Neupane, S. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); World Lab., Lausanne (Switzerland); Williams, M. C. S. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Zichichi, A. [Univ. of Bologna, Bologna (Italy)

    2015-02-03

    The paper describes the multigap resistive plate chamber (RPC). This is a variant of the wide gap RPC. However it has much improved time resolution, while keeping all the other advantages of the wide gap RPC design.

  9. Cyclically controlled welding purge chamber

    Science.gov (United States)

    Gallagher, Robert L. (Inventor)

    1996-01-01

    An arrangement for butt-welding cylindrical sections of large, thin-wall tanks includes a rotatable mandrel with side-by-side sets of radial position adjusters. Each set of adjusters bears on one of the tank sections adjacent the seam, to prevent the sections from sagging out-of-round. The mandrel rotates relative to the welder, so that a continuous seam is formed. A purge chamber is fixed in position behind the seam at the weld head, and is flushed with inert gas. The purge chamber includes a two-sided structure which is contiguous with the cylindrical sections and a circumferential vane to form an open-ended tube-like structure, through which the radial position adjusters pass as the mandrel and cylindrical workpiece sections rotate. The tube-like structure is formed into a chamber by a plurality of movable gates which are controlled to maintain a seal while allowing adjusters to progress through the purge chamber.

  10. The PHENIX Time Expansion Chamber

    Energy Technology Data Exchange (ETDEWEB)

    Rosati, M.; Barish, K.; Botelho, S.; Chang, W.C.; Gogoi, A.L. de; Dietzsch, O.; Ferdousi, T.; Franz, A.; Fung, S.Y.; Gannon, J.; Harder, J.; Kandasamy, A.; Khomutnikov, A.; Kotchekov, D.; Lebedev, A.; Li, X.H.; Mahon, J.; Munirassimann, M.; Negrin, J.; O' Brien, E.; O' Connor, P.; Pisani, R.; Rankowitz, S.; Seto, R.; Takagui, E.M.; Wang, H.Q

    1999-12-27

    The TEC/TRD subsystem will track all charged particles and contribute to the particle identification by the measurement of energy loss. The design, construction and testing of the TEC chambers are described.

  11. The PHENIX Time Expansion Chamber

    CERN Document Server

    Rosati, M; Botelho, S; Chang, W C; Gogoi, A L D; Dietzsch, O; Ferdousi, T; Franz, A; Fung, S Y; Gannon, J; Harder, J; Kandasamy, A; Khomutnikov, A; Kotchekov, D; Lebedev, A; Li, X H; Mahon, J; Munirassimann, M; Negrin, J; O'Brien, E; O'Connor, P; Pisani, R; Rankowitz, S; Seto, R; Takagui, E M; Wang, H Q

    1999-01-01

    The TEC/TRD subsystem will track all charged particles and contribute to the particle identification by the measurement of energy loss. The design, construction and testing of the TEC chambers are described.

  12. Vacuum chambers for LHC LSS

    CERN Document Server

    Costa-Pinto, P

    2004-01-01

    The approximately 6 km total length of the Large Hadron Collider (LHC) warm sections consist of about 1000 chambers. Most of these chambers, of various length and cross sections, are made of copper, but different lengths in stainless steel, mumetal, aluminium and beryllium will also be used. All the chambers will be internally coated with a thin film of TiZrV, to reduce both the secondary electron yield and the photon and electron stimulated desorption, with the further advantage of providing a huge additional pumping speed. In order to cope with the tight production schedule, a new dedicated coating facility was created, which allows four chambers to be coated per working day. This coating facility and its operating mode are described, together with the TiZrV film characteristics (structure, morphology) and performance (pumping speed, ultimate pressure, discharge gas outgassing).

  13. Vaporization chambers and associated methods

    Energy Technology Data Exchange (ETDEWEB)

    Turner, Terry D.; Wilding, Bruce M.; McKellar, Michael G.; Shunn, Lee P.

    2017-02-21

    A vaporization chamber may include at least one conduit and a shell. The at least one conduit may have an inlet at a first end, an outlet at a second end and a flow path therebetween. The shell may surround a portion of each conduit and define a chamber surrounding the portion of each conduit. Additionally, a plurality of discrete apertures may be positioned at longitudinal intervals in a wall of each conduit, each discrete aperture of the plurality of discrete apertures sized and configured to direct a jet of fluid into each conduit from the chamber. A liquid may be vaporized by directing a first fluid comprising a liquid into the inlet at the first end of each conduit, directing jets of a second fluid into each conduit from the chamber through discrete apertures in a wall of each conduit and transferring heat from the second fluid to the first fluid.

  14. BEBC Big European Bubble Chamber

    CERN Multimedia

    CERN PhotoLab

    1974-01-01

    A view of the dismantling of the magnet of BEBC, the 3.7 m European Bubble Chamber : iron magnetic shielding ; lower and upper parts of the vacuum enclosure of the magnet; turbo-molecular vacuum pumps for the "fish-eye" windows; the two superconducting coils; a handling platform; the two cryostats suspended from the bar of the travelling crane which has a 170 ton carrying capacity. The chamber proper, not dismantled, is inside the shielding.

  15. Anterior chamber depth during hemodialysis

    Directory of Open Access Journals (Sweden)

    Gracitelli CPB

    2013-08-01

    Full Text Available Carolina Pelegrini Barbosa Gracitelli,1 Francisco Rosa Stefanini,1 Fernando Penha,1 Miguel Ângelo Góes,2 Sérgio Antonio Draibe,2 Maria Eugênia Canziani,2 Augusto Paranhos Junior1 1Ophthalmology Department, 2Division of Nephrology, Federal University of São Paulo – UNIFESP, São Paulo, Brazil Background: Exacerbation of chronic glaucoma or acute glaucoma is occasionally observed in patients undergoing hemodialysis (HD because of anterior chamber depth changes during this therapy. Purpose: To evaluate anterior chamber depth and axial length in patients during HD sessions. Methods: A total of 67 eyes of 35 patients were prospectively enrolled. Axial length and anterior chamber depth were measured using ultrasonic biometry, and these measures were evaluated at three different times during HD sessions. Body weight and blood pressure pre- and post-HD were also measured. Results: There was no difference in the axial length between the three measurements (P = 0.241. We observed a significantly decreased anterior chamber depth (P = 0.002 during HD sessions. Conclusion: Our results support the idea that there is a change in anterior chamber depth in HD sessions. Keywords: anterior chamber, hemodialysis, axial length, acute angle-closure glaucoma

  16. Cambios de cobertura y uso del suelo (1979-2000 en dos comunidades rurales en el noroeste de Quintana Roo

    Directory of Open Access Journals (Sweden)

    Juan Manuel Dupuy Rada

    2007-01-01

    Full Text Available El análisis de los cambios de cobertura y uso del suelo (ccus en relación con las actividades humanas es esencial para entender y predecir la dinámica del paisaje. Se analizan los ccus en Solferino y San Ángel, dos comunidades rurales del noroeste de Quintana Roo, a partir de fotografías aéreas de 1979 y 2000, recorridos de campo y entrevistas para documentar la historia de uso del suelo. Contrario a la mayoría de estudios, se registró un aumento en la cobertura de selvas, proveniente principalmente de la regeneración de áreas quemadas, lo cual resalta el papel de los incendios como agentes de cambio de cobertura y la capacidad de recuperación de las selvas. El cambio en el uso del suelo favoreció ligeramente la deforestación en Solferino, debido en parte a una mayor disponibilidad de selvas para usos agropecuarios en las cercanías del poblado. En San Ángel se observó una mayor regeneración de selvas, debido en parte a una mayor deforestación previa, asociada a un gran aumento poblacional y a la implementación de programas federales de fomento a la ganadería. Se discuten los escenarios de cambio y las posibles repercusiones de las actuales tendencias institucionales, socioeconómicas y climáticas sobre los futuros ccus.

  17. Investigations of subsurface flow constructed wetlands and associated geomaterial resources in the Akumal and Reforma regions, Quintana Roo, Mexico

    Science.gov (United States)

    Krekeler, Mark P. S.; Probst, Pete; Samsonov, Misha; Tselepis, Cynthia M.; Bates, William; Kearns, Lance E.; Maynard, J. Barry

    2007-12-01

    Subsurface flow constructed wetlands in the village of Akumal, Quintana Roo, Mexico were surveyed to determine the general status of the wetland systems and provide baseline information for long term monitoring and further study. Twenty subsurface flow wetlands were surveyed and common problems observed in the systems were overloading, poor plant cover, odor, and no secondary containment. Bulk mineral composition of aggregate from two subsurface flow constructed wetlands was determined to consist solely of calcite using bulk powder X-ray diffraction. Some soil structure is developed in the aggregate and aggregate levels in wetlands drop at an estimated rate between 3 and 10 cm/year for overloaded wetlands owing to dissolution. Mineral composition from fresh aggregate samples commonly is a mixture of calcite and aragonite. Trace amounts of Pb, Zn, Co, and Cr were observed in fresh aggregate. Coefficients of permeability ( k) varied from 0.006 to 0.027 cm/s with an average values being 0.016 cm/s. Grain size analysis of fresh aggregate samples indicates there are unimodal and multimodal size distributions in the samples with modes in the coarse and fine sand being common. Investigations of other geologic media from the Reforma region indicate that a dolomite with minor amounts of Fe-oxide and palygorskite is abundant and may be a better aggregate source that the current materials used. A Ca-montmorillonite bed was identified in the Reforma region as well and this unit is suitable to serve as a clay liner to prevent leaks for new and existing wetland systems. These newly discovered geologic resources should aid in the improvement of subsurface flow constructed wetlands in the region. Although problems do exist in these wetlands with respect to design, these systems represent a successful implementation of constructed wetlands at a community level in developing regions.

  18. Cambios de cobertura y uso del suelo (1979-2000 en dos comunidades rurales en el noroeste de Quintana Roo

    Directory of Open Access Journals (Sweden)

    Juan Manuel Dupuy Rada

    2012-02-01

    Full Text Available El análisis de los cambios de cobertura y uso del suelo (ccus en relación con las actividades humanas es esencial para entender y predecir la dinámica del paisaje. Se analizan los ccus en Solferino y San Ángel, dos comunidades rurales del noroeste de Quintana Roo, a partir de fotografías aéreas de 1979 y 2000, recorridos de campo y entrevistas para documentar la historia de uso del suelo. Contrario a la mayoría de estudios, se registró un aumento en la cobertura de selvas, proveniente principalmente de la regeneración de áreas quemadas, lo cual resalta el papel de los incendios como agentes de cambio de cobertura y la capacidad de recuperación de las selvas. El cambio en el uso del suelo favoreció ligeramente la deforestación en Solferino, debido en parte a una mayor disponibilidad de selvas para usos agropecuarios en las cercanías del poblado. En San Ángel se observó una mayor regeneración de selvas, debido en parte a una mayor deforestación previa, asociada a un gran aumento poblacional y a la implementación de programas federales de fomento a la ganadería. Se discuten los escenarios de cambio y las posibles repercusiones de las actuales tendencias institucionales, socioeconómicas y climáticas sobre los futuros ccus.

  19. Using Food Flow Data to Assess Sustainability: Land Use Displacement and Regional Decoupling in Quintana Roo, Mexico

    Directory of Open Access Journals (Sweden)

    Marco Millones

    2016-11-01

    Full Text Available Food flow data provide unique insights into the debates surrounding the sustainability of land based production and consumption at multiple scales. Trade flows disguise the spatial correspondence of production and consumption and make their connection to land difficult. Two key components of this spatial disjuncture are land use displacement and economic regional decoupling. By displacing the environmental impact associated with food production from one region to another, environmental trajectories can falsely appear to be sustainable at a particular site or scale. When regional coupling is strong, peripheral areas where land based production occurs are strongly linked and proximate to consumption centers, and the environmental impact of production activities is visible. When food flows occur over longer distances, regional coupling weakens, and environmental impact is frequently overlooked. In this study, we present an analysis of a locally collected food flow dataset containing agricultural and livestock products transported to and from counties in Quintana Roo (QRoo. QRoo is an extensively forested border state in southeast Mexico, which was fully colonized by the state and non-native settlers only in the last century and now is home to some of the major tourist destinations. To approximate land displacement and regional decoupling, we decompose flows to and from QRoo by (1 direction; (2 product types and; (3 scale. Results indicate that QRoo is predominantly a consumer state: incoming flows outnumber outgoing flows by a factor of six, while exports are few, specialized, and with varied geographic reach (Yucatan, south and central Mexico, USA. Imports come predominantly from central Mexico. Local production in QRoo accounts for a small portion of its total consumption. In combining both subsets of agricultural and livestock products, we found that in most years, land consumption requirements were above 100% of the available land not under

  20. [Family factors associated with co-dependency in nurses at a hospital in Cancun, Quintana Roo, México].

    Science.gov (United States)

    Ramírez-Amaro, Margarita; Martínez-Torres, Jorge; Ureña Bogarín, Enrique Leobardo

    2014-05-01

    Identifying family factors associated with the presence of co-dependency in nurses of a regional hospital in Cancún, Quintana Roo, Mexico. Cross-sectional, comparative study. City of Cancun (México). A random sample of 200nurses who met the inclusion criteria (having a partner for over a year, to be at work on the day of the interview), and who gave informed consent, completed three questionnaires during different shifts. Age, educational level, socioeconomic status, type of family structure, life cycle stage, co-dependency and family functioning. A total of 200nurses, with mean age of 36±8years, took part. The most common socioeconomic status was high (48%), and 47.5% had graduate studies. A co-dependency level of 20.5% (95%CI: 15-26.5) was found. Family factors associated with the presence of co-dependency were; family dysfunction, prevalence ratio (PR)=9.62 (95%CI: 3.47-27.3), stage of independence, PR=3.41 (95%CI: 1.44-7.86), single parent, PR=6.35 (95%CI: 2.41-16.68), and time with partner less than 5 years, PR=3.41 (95%CI: 1.54-7.85). It was found that family dysfunction and being a single parent were significantly associated with co-dependency in hospital nurses, therefore, on being able to identify these factors, family physicians can improve their dynamics and functioning by family study, and improving effective communication with nursing staff and their families. Copyright © 2013 Elsevier España, S.L. All rights reserved.

  1. SU-E-T-225: Correction Matrix for PinPoint Ionization Chamber for Dosimetric Measurements in the Newly Released Incise™ Multileaf Collimator Shaped Small Field for CyberKnife M6™ Machine

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Y; Li, T; Heron, D; Huq, M [University of Pittsburgh Cancer Institute and UPMC CancerCenter, Pittsburgh, PA (United States)

    2015-06-15

    Purpose: For small field dosimetry, such as measurements of output factors for cones or MLC-shaped irregular small fields, ion chambers often Result in an underestimation of the dose, due to both the volume averaging effect and the lack of lateral charged particle equilibrium. This work presents a mathematical model for correction matrix for a PTW PinPoint ionization chamber for dosimetric measurements made in the newly released Incise™ Multileaf collimator fields of the CyberKnife M6™ machine. Methods: A correction matrix for a PTW 0.015cc PinPoint ionization chamber was developed by modeling its 3D dose response in twelve cone-shaped circular fields created using the 5mm, 7.5mm, 10mm, 12.5mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, 60mm cones in a CyberKnife M6™ machine. For each field size, hundreds of readings were recorded for every 2mm chamber shift in the horizontal plane. The contribution of each dose pixel to a measurement point depended on the radial distance and the angle to the chamber axis. These readings were then compared with the theoretical dose as obtained with Monte Carlo calculation. A penalized least-square optimization algorithm was developed to generate the correction matrix. After the parameter fitting, the mathematical model was validated for MLC-shaped irregular fields. Results: The optimization algorithm used for parameter fitting was stable and the resulted response factors were smooth in spatial domain. After correction with the mathematical model, the chamber reading matched with the calculation for all the tested fields to within 2%. Conclusion: A novel mathematical model has been developed for PinPoint chamber for dosimetric measurements in small MLC-shaped irregular fields. The correction matrix is dependent on detector, treatment unit and the geometry of setup. The model can be applied to non-standard composite fields and provides an access to IMRT point dose validation.

  2. Percepción y conocimiento ambiental en la costa de Quintana Roo: una caracterización a través de encuestas

    Directory of Open Access Journals (Sweden)

    Lilia Susana Padilla y Sotelo

    2003-01-01

    Full Text Available Este trabajo tiene por objeto indagar acerca de la percepción ambiental y el nivel de conocimientos sobre aspectos ambientales en cuatro localidades representativas de la costa de Quintana Roo: Cancún, Playa del Carmen, Tulúm y Chetumal; en ese sentido, se estudia la relación existente entre algunos elementos microsociales en el espacio económico del turismo, respecto al estado del medio ambiente en la costa de Quintana Roo, como factores subjetivos influyentes en características objetivas del espacio geográfico. La investigación se desarrolló en dos pasos fundamentales, primero la realización y el procesamiento de entrevistas entre los pobladores, mediante las cuales se detectó la existencia de percepciones diferentes según los patrones de interacción social de grupos de individuos, dados por el carácter de su actividad práctica socioproductiva, o de los servicios que realizan, e incluso por su nivel educacional. Esta situación se reproduce en el ámbito geográfico en cuanto a localidades, revelado en un segundo momento de la investigación, lo cual se relaciona con la diferente dinámica del desarrollo económico y social de cada una de las localidades en cuestión. El trabajo resulta, en primera instancia, un análisis que facilita el acercamiento a las necesidades de la educación ambiental como proceso educativo, que oriente la participación popular en la solución de problemas ambientales inherentes a la emergencia del desarrollo del turismo en la costa de Quintana Roo y a factores concomitantes.

  3. Percepción y conocimiento ambiental en la costa de Quintana Roo: una caracterización a través de encuestas

    Directory of Open Access Journals (Sweden)

    Lilia Susana Padilla y Sotelo

    2012-02-01

    Full Text Available Este trabajo tiene por objeto indagar acerca de la percepción ambiental y el nivel de conocimientos sobre aspectos ambientales en cuatro localidades representativas de la costa de Quintana Roo: Cancún, Playa del Carmen, Tulúm y Chetumal; en ese sentido, se estudia la relación existente entre algunos elementos microsociales en el espacio económico del turismo, respecto al estado del medio ambiente en la costa de Quintana Roo, como factores subjetivos influyentes en características objetivas del espacio geográfico. La investigación se desarrolló en dos pasos fundamentales, primero la realización y el procesamiento de entrevistas entre los pobladores, mediante las cuales se detectó la existencia de percepciones diferentes según los patrones de interacción social de grupos de individuos, dados por el carácter de su actividad práctica socioproductiva, o de los servicios que realizan, e incluso por su nivel educacional. Esta situación se reproduce en el ámbito geográfico en cuanto a localidades, revelado en un segundo momento de la investigación, lo cual se relaciona con la diferente dinámica del desarrollo económico y social de cada una de las localidades en cuestión. El trabajo resulta, en primera instancia, un análisis que facilita el acercamiento a las necesidades de la educación ambiental como proceso educativo, que oriente la participación popular en la solución de problemas ambientales inherentes a la emergencia del desarrollo del turismo en la costa de Quintana Roo y a factores concomitantes.

  4. Plasma chemistry in wire chambers

    Energy Technology Data Exchange (ETDEWEB)

    Wise, J.

    1990-05-01

    The phenomenology of wire chamber aging is discussed and fundamentals of proportional counters are presented. Free-radical polymerization and plasma polymerization are discussed. The chemistry of wire aging is reviewed. Similarities between wire chamber plasma (>1 atm dc-discharge) and low-pressure rf-discharge plasmas, which have been more widely studied, are suggested. Construction and use of a system to allow study of the plasma reactions occurring in wire chambers is reported. A proportional tube irradiated by an {sup 55}Fe source is used as a model wire chamber. Condensable species in the proportional tube effluent are concentrated in a cryotrap and analyzed by gas chromatography/mass spectrometry. Several different wire chamber gases (methane, argon/methane, ethane, argon/ethane, propane, argon/isobutane) are tested and their reaction products qualitatively identified. For all gases tested except those containing methane, use of hygroscopic filters to remove trace water and oxygen contaminants from the gas resulted in an increase in the average molecular weight of the products, consistent with results from low-pressure rf-discharge plasmas. It is suggested that because water and oxygen inhibit polymer growth in the gas phase that they may also reduce polymer deposition in proportional tubes and therefore retard wire aging processes. Mechanistic implications of the plasma reactions of hydrocarbons with oxygen are suggested. Unresolved issues in this work and proposals for further study are discussed.

  5. Milenarismo y profecía en la etnogénesis de los macehualob de Quintana Roo, México

    OpenAIRE

    Barabas, Alicia M.

    2013-01-01

    Note portant sur l'auteur La lectura de La Guerra de Castas de Nelson Reed (1964, 1971) fue la primera en llamar mi atención hacia la masiva insurrección y el culto de la Cruz Parlante, protagonizados por los mayas a partir de la segunda mitad del siglo xix. Paulatinamente, el conocimiento local y foráneo acumulado sobre la cultura e historia mayas, especialmente sobre la guerra, y el trabajo de campo que desarrollábamos en los pueblos macehualob de Quintana Roo, nos convencieron de que estáb...

  6. ESTRATEGIAS DE CONTROL DE IMPACTOS TURÍSTICOS EN LAS ÁREAS NATURALES PROTEGIDAS Y ZONAS ARQUEOLÓGICAS DE QUINTANA ROO, MÉXICO

    OpenAIRE

    Gino Segrado Pavón, Romano; del Carmen Serrano Barquín, Rocío; del Carmen Mínguez García, María; Cruz Jiménez, Graciela; Juan Pérez, José Isabel

    2015-01-01

    El objetivo principal del estudio fue determinar las estrategias aplicadas para evitar o amortiguar el impacto causado por los visitantes a zonas arqueológicas (ZA) y áreas naturales protegidas (ANP) de Quintana Roo (México), así como analizar el modelo de gestión social de apoyo a las comunidades y los agentes involucrados. El análisis se realizó desde la perspectiva de la sustentabilidad y el desarrollo turístico local, con un enfoque cualitativo. La información fue obtenida por medio de en...

  7. "Flat-Fish" Vacuum Chamber

    CERN Multimedia

    CERN PhotoLab

    1978-01-01

    The picture shows a "Flat-Fish" vacuum chamber being prepared in the ISR workshop for testing prior to installation in the Split Field Magnet (SFM) at intersection I4. The two shells of each part were hydroformed from 0.15 mm thick inconel 718 sheet (with end parts in inconel 600 for easier manual welding to the arms) and welded toghether with two strips which were attached by means of thin stainless steel sheets to the Split Field Magnet poles in order to take the vertical component of the atmospheric pressure force. This was the thinnest vacuum chamber ever made for the ISR. Inconel material was chosen for its high elastic modulus and strenght at chamber bake-out temperature. In this picture the thin sheets transferring the vertical component of the atmosferic pressure force are attached to a support frame for testing. See also 7712182, 7712179.

  8. Impedances of Laminated Vacuum Chambers

    Energy Technology Data Exchange (ETDEWEB)

    Burov, A.; Lebedev, V.; /Fermilab

    2011-06-22

    First publications on impedance of laminated vacuum chambers are related to early 70s: those are of S. C. Snowdon [1] and of A. G. Ruggiero [2]; fifteen years later, a revision paper of R. Gluckstern appeared [3]. All the publications were presented as Fermilab preprints, and there is no surprise in that: the Fermilab Booster has its laminated magnets open to the beam. Being in a reasonable mutual agreement, these publications were all devoted to the longitudinal impedance of round vacuum chambers. The transverse impedance and the flat geometry case were addressed in more recent paper of K. Y. Ng [4]. The latest calculations of A. Macridin et al. [5] revealed some disagreement with Ref. [4]; this fact stimulated us to get our own results on that matter. Longitudinal and transverse impendances are derived for round and flat laminated vacuum chambers. Results of this paper agree with Ref. [5].

  9. The CLAS drift chamber system

    CERN Document Server

    Mestayer, M D; Asavapibhop, B; Barbosa, F J; Bonneau, P; Christo, S B; Dodge, G E; Dooling, T; Duncan, W S; Dytman, S A; Feuerbach, R; Gilfoyle, G P; Gyurjyan, V; Hicks, K H; Hicks, R S; Hyde-Wright, C E; Jacobs, G; Klein, A; Klein, F J; Kossov, M; Kuhn, S E; Magahiz, R A; Major, R W; Martin, C; McGuckin, T; McNabb, J; Miskimen, R A; Müller, J A; Niczyporuk, B B; O'Meara, J E; Qin, L M; Raue, B A; Robb, J; Roudot, F; Schumacher, R A; Tedeschi, D J; Thompson, R A; Tilles, D; Tuzel, W; Vansyoc, K; Vineyard, M F; Weinstein, L B; Wilkin, G R; Yegneswaran, A; Yun, J

    2000-01-01

    Experimental Hall B at Jefferson Laboratory houses the CEBAF Large Acceptance Spectrometer, the magnetic field of which is produced by a superconducting toroid. The six coils of this toroid divide the detector azimuthally into six sectors, each of which contains three large multi-layer drift chambers for tracking charged particles produced from a fixed target on the toroidal axis. Within the 18 drift chambers are a total of 35,148 individually instrumented hexagonal drift cells. The novel geometry of these chambers provides for good tracking resolution and efficiency, along with large acceptance. The design and construction challenges posed by these large-scale detectors are described, and detailed results are presented from in-beam measurements.

  10. Valuing the risk reduction of coastal ecosystems in data poor environments: an application in Quintana Roo, Mexico

    Science.gov (United States)

    Reguero, B. G.; Toimil, A.; Escudero, M.; Menendez, P.; Losada, I. J.; Beck, M. W.; Secaira, F.

    2016-12-01

    Coastal risks are increasing from both economic growth and climate change. Understanding such risks is critical to assessing adaptation needs and finding cost effective solutions for coastal sustainability. Interest is growing in the role that nature-based measures can play in adapting to climate change. Here we apply and advance a framework to value the risk reduction potential of coastal ecosystems, with an application in a large scale domain, the coast of Quintana Roo, México, relevant for coastal policy and management, but with limited data. We build from simple to use open-source tools. We first assess the hazards using stochastic simulation of historical tropical storms and inferring two scenarios of future climate change for the next 20 years, which include the effect of sea level rise and changes in frequency and intensity of storms. For each storm, we obtain wave and surge fields using parametrical models, corrected with pre-computed static wind surge numerical simulations. We then assess losses on capital stock and hotels and calculate total people flooded, after accounting for the effect of coastal ecosystems in reducing coastal hazards. We inferred the location of major barrier reefs and dune systems using available satellite imagery, and sections of bathymetry and elevation data. We also digitalized the surface of beaches and location of coastal structures from satellite imagery. In a poor data environment, where there is not bathymetry data for the whole of the region, we inferred representative coastal profiles of coral reef and dune sections and validated at available sections with measured data. Because we account for the effect of reefs, dunes and mangroves in coastal profiles every 200 m of shoreline, we are able to estimate the value of such ecosystems by comparing with benchmark simulations when we take them out of the propagation and flood model. Although limited in accuracy in comparison to more complex modeling, this approach is able to

  11. Annular-Cross-Section CFE Chamber

    Science.gov (United States)

    Sharnez, Rizwan; Sammons, David W.

    1994-01-01

    Proposed continuous-flow-electrophoresis (CFE) chamber of annular cross section offers advantages over conventional CFE chamber, and wedge-cross-section chamber described in "Increasing Sensitivity in Continuous-Flow Electrophoresis" (MFS-26176). In comparison with wedge-shaped chamber, chamber of annular cross section virtually eliminates such wall effects as electro-osmosis and transverse gradients of velocity. Sensitivity enhanced by incorporating gradient maker and radial (collateral) flow.

  12. Ionization chambers for LET determination

    DEFF Research Database (Denmark)

    Kaiser, Franz-Joachim; Bassler, Niels; Tölli, Heikki

    2010-01-01

    resolution and high sensitivity are necessary. For exact dosimetry which is done using ionization chambers (ICs), the recombination taking place in the IC has to be known. Up to now, recombination is corrected phenomenologically and more practical approaches are currently used. Nevertheless, Jaff´e's theory...... of columnar recombination was designed to model the detector efficiency of an ionization chamber. Here, we have shown that despite the approximations and simplification made, the theory is correct for the LETs typically found in clinical radiotherapy employing particles from protons to carbon ions...

  13. Ionization Chamber Measures Extreme Ultraviolet

    Science.gov (United States)

    Carlson, Robert W.

    1987-01-01

    Ionization chamber operates in nearly total photon absorption as stable, self-calibrating detector of ionizing extreme ultraviolet radiation. Working gas of instrument is neon; photoionization properties well known and readily applicable to absolute measurements. Designed for measurements of solar ultraviolet flux aboard sounding rocket, instrument used on Earth to measure ultraviolet radiation in vacuum systems. Ionization chamber collects positive neon ions and electrons produced by irradiation of neon gas by ultraviolet photons. Approximately one ion produced by each photon; consequently, photoionization current nearly proportional to photon flux.

  14. Patient specific quality assurance of RapidArc pre treatment plans using semiflex 0.125 cc ionization chamber

    Science.gov (United States)

    Kumar, S. A. Syam; Vivekanandan, Nagarajan

    2017-01-01

    Patient specific pre-treatment quality assurance for RapidArc plans were analyzed for hundred patients for different sites. Verification plan was created for each treatment plan in Eclipse 8.6 treatment planning system with the semiflex ionization chamber and the octavius phantom. Absolute point dose were measured for head and neck, thorax and abdomen cases using semiflex (0.125 cc) ionization chamber. Positive absolute mean dose variation of 0.56% was observed with thorax cases with a standard deviation (SD) of ±1.13 between the plans with a range of -1.78% to 2.70%. Negative percentage dose errors were found with head and neck and abdomen cases, with a mean variation of -0.43% (SD±1.50), (range -3.25% to 2.85%) and -0.35% (SD±1.48), (range -3.10% to 2.65%) for head and neck and abdomen cases respectively. Evaluation has been done using PTW verisoft software by keeping the passing criteria as 3 mm DTA, 3% DD, for 95% of the evaluated dose points. The maximum percentage value failed in gamma analysis was found to be 4.95, 4.75, and 4.88 for head and neck, thorax, and abdomen cases respectively. In all the cases analyzed the percentage dose points failed the gamma criteria is less than 5%. On the basis of the studies performed it can be concluded that the semiflex ionization chamber having a volume of 0.125 cc can be used efficiently for measuring the pre-treatment quality assurance of RapidArc plans for all the sites.

  15. La zonificación y su aplicación en las Áreas Naturales Protegidas de uso Turístico de Quintana Roo

    Directory of Open Access Journals (Sweden)

    Romano Gino Segrado Pavón

    2010-01-01

    Full Text Available El presente estudio expone los hallazgos de la aplicación de la técnica de zonificación en las Áreas Naturales Protegidas (ANP de uso turístico del estado de Quintana Roo. La identificación de las ANP de uso turístico se realizó por medio de la revisión de documentos oficiales, mediante solicitudes de información a las instituciones públicas encargadas de la protección o administración de dichas áreas, con el apoyo de la Ley Federal de Transparencia y Acceso a la Información Pública Gubernamental (LFTAIPG.Como resultado, se determinó que sólo un porcentaje limitado de las ANP del estado de Quintana Roo ha realizado estudios de zonificación, aunque tengan uso turístico intensivo y cobren una cuota de acceso al sitio. Finalmente, si bien existen leyes y reglamentos que protegen las ANP, la falta de aplicación de la zonificación, junto con el uso turístico, aceleran el proceso de deterioro de estas áreas, por lo que se propone dicha técnica básica de protección para estos lugares.

  16. DELPHI's Ring Imaging Cherenkov Chamber

    CERN Multimedia

    1989-01-01

    The hundreds of mirrors around this Ring Imaging Cherenkov Chamber reflect cones of light created by fast moving particles to a detector. The velocity of a particle can be measured by the size of the ring produced on the detector. DELPHI, which ran from 1989 to 2000 on the LEP accelerator, was primarily concerned with particle identification.

  17. A dual deformable reverberation chamber

    NARCIS (Netherlands)

    Leferink, Frank

    2010-01-01

    There is disclosed an arrangement for measuring the effectiveness of a shielding material against electromagnetic fields. The arrangement comprises a first and a second reverberation chamber sharing a common wall. The common wall is partly made of the shielding material. A first antenna is arranged

  18. Bubble chamber: colour enhanced tracks

    CERN Multimedia

    1998-01-01

    This artistically-enhanced image of real particle tracks was produced in the Big European Bubble Chamber (BEBC). Liquid hydrogen is used to create bubbles along the paths of the particles as a piston expands the medium. A magnetic field is produced in the detector causing the particles to travel in spirals, allowing charge and momentum to be measured.

  19. Testing an hydrogen streamer chamber

    CERN Multimedia

    1975-01-01

    A 2x10 cm gap streamer chamber, 35x55 cm2 in surface, was built and tested at CERN. Good tracks of cosmic rays were obtained up to atmospheric pressure, see F. Rohrbach et al, CERN-LAL (Orsay) Collaboration, Nucl. Instr. Methods 141 (1977) 229. Michel Cathenoz stand on the center.

  20. Hydrostatic Hyperbaric Chamber Ventilation System

    Science.gov (United States)

    Sarguisingh, Miriam J.

    2012-01-01

    The hydrostatic hyperbaric chamber (HHC) represents the merger of several technologies in development for NASA aerospace applications, harnessed to directly benefit global health. NASA has significant experience developing composite hyperbaric chambers for a variety of applications. NASA also has researched the application of water-filled vessels to increase tolerance of acceleration forces. The combination of these two applications has resulted in the hydrostatic chamber, which has been conceived as a safe, affordable means of making hyperbaric oxygen therapy (HBOT) available in the developing world for the treatment of a variety of medical conditions. Specifically, HBOT is highly-desired as a possibly curative treatment for Buruli Ulcer, an infectious condition that afflicts children in sub-Saharan Africa. HBOT is simply too expensive and too dangerous to implement in the developing world using standard equipment. The HHC technology changes the paradigm. The HHC differs from standard hyperbaric chambers in that the majority of its volume is filled with water which is pressurized by oxygen being supplied in the portion of the chamber containing the patient s head. This greatly reduces the amount of oxygen required to sustain a hyperbaric atmosphere, thereby making the system more safe and economical to operate. An effort was taken to develop an HHC system to apply HBOT to children that is simple and robust enough to support transport, assembly, maintenance and operation in developing countries. This paper details the concept for an HHC ventilation and pressurization system to provide controlled pressurization and adequate washout of carbon dioxide while the subject is enclosed in the confined space during the administration of the medical treatment. The concept took into consideration operational complexity, safety to the patient and operating personnel, and physiological considerations. The simple schematic, comprised of easily acquired commercial hardware

  1. Characterization of a two-dimensional liquid-filled ion chamber detector array used for verification of the treatments in radiotherapy.

    Science.gov (United States)

    Markovic, Miljenko; Stathakis, Sotirios; Mavroidis, Panayiotis; Jurkovic, Ines-Ana; Papanikolaou, Nikos

    2014-05-01

    The purpose of the study is to investigate the characteristics of a two-dimensional (2D) liquid-filled ion chamber detector array, which is used for the verification of radiotherapy treatment plans that use small field sizes of up to 10 × 10 cm. The device used in this study was Octavius 1000 SRS model (PTW, Freiburg, Germany). Its 2D array of detectors consists of 977 liquid-filled ion chambers arranged over an area of 11 × 11 cm. The size of the detectors is 2.3 × 2.3 × 0.5 mm (volume of 0.003 cm(3)) and their spacing in the inner area of 5.5 × 5.5 cm is 2.5 mm center-to-center, whereas in the outer area it is 5 mm center-to-center. The detector reproducibility, dose linearity, and sensitivity to positional changes of the collimator were tested. Also, the output factors of field sizes ranging from 0.5 × 0.5 to 10 × 10 cm(2) both for open and wedged fields have been measured and compared against those measured by a pin-point ionization chamber, liquid filled microchamber, SRS diode, and EDR2 film. Its short-term reproducibility was within 0.2% and its medium and long-term reproducibility was within 0.5% (verified with air ionization chamber absolute dose measurements), which is an excellent result taking into account the daily fluctuation of the linear accelerator and the errors in the device setup reproducibility. The dose linearity and dose rate dependence were measured in the range of 0.5-85 Gy and 0.5-10 Gy min(-1), respectively, and were verified with air ionization chamber absolute dose measurements was within 3%. The measurements of the sensitivity showed that the 2D Array could detect millimetric collimator positional changes. The measured output factors showed an agreement of better than 0.3% with the pinpoint chamber and microliquid filled chamber for the field sizes between 3 × 3 and 10 × 10 cm(2). For field sizes down to 1 × 1 cm(2), the agreement with SRS diode and microliquid filled chamber is better than 2%. The measurements of open and

  2. Characterization of a two-dimensional liquid-filled ion chamber detector array used for verification of the treatments in radiotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Markovic, Miljenko, E-mail: markovic@livemail.uthscsa.edu; Stathakis, Sotirios; Mavroidis, Panayiotis; Jurkovic, Ines-Ana; Papanikolaou, Nikos [Department of Radiation Oncology, University of Texas Health Sciences Center at San Antonio, San Antonio, Texas 78229 (United States)

    2014-05-15

    Purpose: The purpose of the study is to investigate the characteristics of a two-dimensional (2D) liquid-filled ion chamber detector array, which is used for the verification of radiotherapy treatment plans that use small field sizes of up to 10 × 10 cm. Methods: The device used in this study was Octavius 1000 SRS model (PTW, Freiburg, Germany). Its 2D array of detectors consists of 977 liquid-filled ion chambers arranged over an area of 11 × 11 cm. The size of the detectors is 2.3 × 2.3 × 0.5 mm (volume of 0.003 cm{sup 3}) and their spacing in the inner area of 5.5 × 5.5 cm is 2.5 mm center-to-center, whereas in the outer area it is 5 mm center-to-center. The detector reproducibility, dose linearity, and sensitivity to positional changes of the collimator were tested. Also, the output factors of field sizes ranging from 0.5 × 0.5 to 10 × 10 cm{sup 2} both for open and wedged fields have been measured and compared against those measured by a pin-point ionization chamber, liquid filled microchamber, SRS diode, and EDR2 film. Results: Its short-term reproducibility was within 0.2% and its medium and long-term reproducibility was within 0.5% (verified with air ionization chamber absolute dose measurements), which is an excellent result taking into account the daily fluctuation of the linear accelerator and the errors in the device setup reproducibility. The dose linearity and dose rate dependence were measured in the range of 0.5–85 Gy and 0.5–10 Gy min{sup −1}, respectively, and were verified with air ionization chamber absolute dose measurements was within 3%. The measurements of the sensitivity showed that the 2D Array could detect millimetric collimator positional changes. The measured output factors showed an agreement of better than 0.3% with the pinpoint chamber and microliquid filled chamber for the field sizes between 3 × 3 and 10 × 10 cm{sup 2}. For field sizes down to 1 × 1 cm{sup 2}, the agreement with SRS diode and microliquid filled

  3. Growing and Analyzing Biofilms in Flow Chambers

    DEFF Research Database (Denmark)

    Tolker-Nielsen, Tim; Sternberg, Claus

    2011-01-01

    This unit describes the setup of flow chamber systems for the study of microbial biofilms, and methods for the analysis of structural biofilm formation. Use of flow chambers allows direct microscopic investigation of biofilm formation. The biofilms in flow chambers develop under hydrodynamic...... conditions, and the environment can be carefully controlled and easily changed. The protocols in this unit include construction of the flow chamber and the bubble trap, assembly and sterilization of the flow chamber system, inoculation of the flow chambers, running of the system, image capture and analysis...

  4. Chamber dynamic research with pulsed power

    Energy Technology Data Exchange (ETDEWEB)

    PETERSON,ROBERT R.; OLSON,CRAIG L.; RENK,TIMOTHY J.; ROCHAU,GARY E.; SWEENEY,MARY ANN

    2000-05-15

    In Inertial Fusion Energy (IFE), Target Chamber Dynamics (TCD) is an integral part of the target chamber design and performance. TCD includes target output deposition of target x-rays, ions and neutrons in target chamber gases and structures, vaporization and melting of target chamber materials, radiation-hydrodynamics in target chamber vapors and gases, and chamber conditions at the time of target and beam injections. Pulsed power provides a unique environment for IFE-TCD validation experiments in two important ways: they do not require the very clean conditions which lasers need and they currently provide large x-ray and ion energies.

  5. Impact of minimum catch size on the population viability of Strombus gigas (Mesogastropoda: Strombidae inQuintana Roo, Mexico

    Directory of Open Access Journals (Sweden)

    Joanne R. Peel

    2014-12-01

    Full Text Available The queen conch Strombus gigas represents one of the most important fishery resources of the Caribbean but heavy fishing pressure has led to the depletion of stocks throughout the region, causing the inclusion of this species into CITES Appendix II and IUCN’s Red-List. In Mexico, the queen conch is managed through a minimum fishing size of 200mm shell length and a fishing quota which usually represents 50% of the adult biomass. The objectives of this study were to determine the intrinsic population growth rate of the queen conch population of Xel-Ha, Quintana Roo, Mexico, and to assess the effects of a regulated fishing impact, simulating the extraction of 50% adult biomass on the population density. We used three different minimum size criteria to demonstrate the effects of minimum catch size on the population density and discuss biological implications. Demographic data was obtained through capture-mark-recapture sampling, collecting all animals encountered during three hours, by three divers, at four different sampling sites of the Xel-Ha inlet. The conch population was sampled each month between 2005 and 2006, and bimonthly between 2006 and 2011, tagging a total of 8 292 animals. Shell length and lip thickness were determined for each individual. The average shell length for conch with formed lip in Xel-Ha was 209.39±14.18mm and the median 210mm. Half of the sampled conch with lip ranged between 200mm and 219mm shell length. Assuming that the presence of the lip is an indicator for sexual maturity, it can be concluded that many animals may form their lip at greater shell lengths than 200mm and ought to be considered immature. Estimation of relative adult abundance and densities varied greatly depending on the criteria employed for adult classification. When using a minimum fishing size of 200mm shell length, between 26.2% and up to 54.8% of the population qualified as adults, which represented a simulated fishing impact of almost one

  6. Impact of minimum catch size on the population viability of Strombus gigas (Mesogastropoda: Strombidae) in Quintana Roo, Mexico.

    Science.gov (United States)

    Peel, Joanne R; Mandujano, María del Carmen

    2014-12-01

    The queen conch Strombus gigas represents one of the most important fishery resources of the Caribbean but heavy fishing pressure has led to the depletion of stocks throughout the region, causing the inclusion of this species into CITES Appendix II and IUCN's Red-List. In Mexico, the queen conch is managed through a minimum fishing size of 200 mm shell length and a fishing quota which usually represents 50% of the adult biomass. The objectives of this study were to determine the intrinsic population growth rate of the queen conch population of Xel-Ha, Quintana Roo, Mexico, and to assess the effects of a regulated fishing impact, simulating the extraction of 50% adult biomass on the population density. We used three different minimum size criteria to demonstrate the effects of minimum catch size on the population density and discuss biological implications. Demographic data was obtained through capture-mark-recapture sampling, collecting all animals encountered during three hours, by three divers, at four different sampling sites of the Xel-Ha inlet. The conch population was sampled each month between 2005 and 2006, and bimonthly between 2006 and 2011, tagging a total of 8,292 animals. Shell length and lip thickness were determined for each individual. The average shell length for conch with formed lip in Xel-Ha was 209.39 ± 14.18 mm and the median 210 mm. Half of the sampled conch with lip ranged between 200 mm and 219 mm shell length. Assuming that the presence of the lip is an indicator for sexual maturity, it can be concluded that many animals may form their lip at greater shell lengths than 200 mm and ought to be considered immature. Estimation of relative adult abundance and densities varied greatly depending on the criteria employed for adult classification. When using a minimum fishing size of 200 mm shell length, between 26.2% and up to 54.8% of the population qualified as adults, which represented a simulated fishing impact of almost one third of the

  7. A portable miniature anechoic chamber

    Science.gov (United States)

    Lorthioir, Jack; Gavin, Paul

    The portable miniature anechoic chamber (PMAC), a low-cost alternative to a full-size anechoic chamber, is presented. The PMAC is a miniature, enclosed, RF-tight microwave antenna range, which approximates the performance of an indoor range over the C through Ku (G through J)-band frequencies. The small footprint, four by six feet, allows for ease of movement by one person to a test site, indoors or outdoors. The PMAC can be used at I (intermediate)-level to support the operational readiness (OR) requirements of the U.S. Army, Navy or Air Force. In conjunction with the antenna test equipment (ATE), and under TPS control, it can be used for performance verification, fault detection and fault isolation. A typical application using the PMAC in this operating mode is described.

  8. Development of multiwire proportional chambers

    CERN Multimedia

    Charpak, G

    1969-01-01

    It has happened quite often in the history of science that theoreticians, confronted with some major difficulty, have successfully gone back thirty years to look at ideas that had then been thrown overboard. But it is rare that experimentalists go back thirty years to look again at equipment which had become out-dated. This is what Charpak and his colleagues did to emerge with the 'multiwire proportional chamber' which has several new features making it a very useful addition to the armoury of particle detectors. In the 1930s, ion-chambers, Geiger- Muller counters and proportional counters, were vital pieces of equipment in nuclear physics research. Other types of detectors have since largely replaced them but now the proportional counter, in new array, is making a comeback.

  9. Actuator System with Dual Chambers

    DEFF Research Database (Denmark)

    2015-01-01

    (8), the lid having a shaft opening (17) for a shaft (6) coupled to the magnetic rotor (5), wherein the magnetic rotor (5), when inserted in the translator cylinder (2), is arranged to translate a linear movement of the translator cylinder (2) into a rotational movement of the magnetic rotor by using...... magnetic flux (82) interacting between the magnetic stator and the magnetic rotor, said rotational movements is being transferred through a shaft (6), the lid (8) with a shaft opening (17) arranged for receiving the shaft (6), wherein the shaft is arranged to make both the linear and the rotational...... movement in the shaft opening (17), the lid (8) being arranged for confining the second end (15) of the translator cylinder (2), the translator cylinder confined by the lid (8) forms,when divided by the magnetic rotor (5), a first chamber (TC) with a first volume and a second chamber(BC) with a second...

  10. LEP vacuum chamber, early prototype

    CERN Multimedia

    CERN PhotoLab

    1978-01-01

    The structure of LEP, with long bending magnets and little access to the vacuum chamber between them, required distributed pumping. This is an early prototype for the LEP vacuum chamber, made from extruded aluminium. The main opening is for the beam. The small channel to the right is for cooling water, to carry away the heat deposited by the synchroton radiation from the beam. The 4 slots in the channel to the left house the strip-shaped ion-getter pumps (see 7810255). The ion-getter pumps depended on the magnetic field of the bending magnets, too low at injection energy for the pumps to function well. Also, a different design was required outside the bending magnets. This design was therefore abandoned, in favour of a thermal getter pump (see 8301153 and 8305170).

  11. Actuator System with Dual Chambers

    DEFF Research Database (Denmark)

    2015-01-01

    The present invention relates to an actuator system with a magnetic lead screw (50), comprises a magnetic rotor (5) and a translator cylinder (2), the translator cylinder (2) comprises a magnetic stator (16), the translator cylinder (2) has a closed first end (14) and a second end confined by a lid...... (8), the lid having a shaft opening (17) for a shaft (6) coupled to the magnetic rotor (5), wherein the magnetic rotor (5), when inserted in the translator cylinder (2), is arranged to translate a linear movement of the translator cylinder (2) into a rotational movement of the magnetic rotor by using...... movement in the shaft opening (17), the lid (8) being arranged for confining the second end (15) of the translator cylinder (2), the translator cylinder confined by the lid (8) forms,when divided by the magnetic rotor (5), a first chamber (TC) with a first volume and a second chamber(BC) with a second...

  12. MPS II drift chamber system

    Energy Technology Data Exchange (ETDEWEB)

    Platner, E.D.

    1982-01-01

    The MPS II detectors are narrow drift space chambers designed for high position resolution in a magnetic field and in a very high particle flux environment. Central to this implementation was the development of 3 multi-channel custom IC's and one multi-channel hybrid. The system is deadtimeless and requires no corrections on an anode-to-anode basis. Operational experience and relevance to ISABELLE detectors is discussed.

  13. GBO RF Anechoic Chamber & Antenna Test Range

    Data.gov (United States)

    Federal Laboratory Consortium — A shielded anechoic chamber measuring 15 by 15 by 37 feet is located in the Jansky Laboratory at Green Bank. This chamber has been outfitted as a far-field antenna...

  14. 21 CFR 868.5470 - Hyperbaric chamber.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Hyperbaric chamber. 868.5470 Section 868.5470 Food... DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5470 Hyperbaric chamber. (a) Identification. A hyperbaric chamber is a device that is intended to increase the environmental oxygen pressure to promote...

  15. Growing and analyzing biofilms in flow chambers

    DEFF Research Database (Denmark)

    Tolker-Nielsen, Tim; Sternberg, Claus

    2011-01-01

    This unit describes the setup of flow chamber systems for the study of microbial biofilms, and methods for the analysis of structural biofilm formation. Use of flow chambers allows direct microscopic investigation of biofilm formation. The biofilms in flow chambers develop under hydrodynamic cond...

  16. Growing and Analyzing Biofilms in Flow Chambers

    DEFF Research Database (Denmark)

    Tolker-Nielsen, Tim; Sternberg, Claus

    2011-01-01

    This unit describes the setup of flow chamber systems for the study of microbial biofilms, and methods for the analysis of structural biofilm formation. Use of flow chambers allows direct microscopic investigation of biofilm formation. The biofilms in flow chambers develop under hydrodynamic cond...

  17. Wire chamber degradation at the Argonne ZGS

    Energy Technology Data Exchange (ETDEWEB)

    Haberichter, W.; Spinka, H.

    1986-01-01

    Experience with multiwire proportional chambers at high rates at the Argonne Zero Gradient Synchrotron is described. A buildup of silicon on the sense wires was observed where the beam passed through the chamber. Analysis of the chamber gas indicated that the density of silicon was probably less than 10 ppM.

  18. LEP vacuum chamber cross-section

    CERN Multimedia

    1987-01-01

    This diagram shows the layout of the vacuum chambers used at LEP, which was in operation at CERN between 1989 and 2000. Vacuum chambers are necessary in accelerators to prevent unwanted interactions that can destabilise the beam. The pump on the right sucks air out of the chamber allowing the beam to progress with minimal interactions.

  19. Simple Cloud Chambers Using Gel Ice Packs

    Science.gov (United States)

    Kamata, Masahiro; Kubota, Miki

    2012-01-01

    Although cloud chambers are highly regarded as teaching aids for radiation education, school teachers have difficulty in using cloud chambers because they have to prepare dry ice or liquid nitrogen before the experiment. We developed a very simple and inexpensive cloud chamber that uses the contents of gel ice packs which can substitute for dry…

  20. Vacuum chamber at intersection I-6

    CERN Multimedia

    1971-01-01

    The vacuum chamber at intersection region I-6, one of these where experiments in colliding-beam physics will be taking place. The "wheels" prevent the thin wall (1.5 mm) of the chamber from collapsing. The chamber is equipped with heating tapes and its wrapped in thermal insulation. Residual gas pressure at this and other similar regions is around 10_11.

  1. The Octavius1500 2D ion chamber array and its associated phantoms: dosimetric characterization of a new prototype.

    Science.gov (United States)

    Van Esch, Ann; Basta, Katarzyna; Evrard, Marie; Ghislain, Michel; Sergent, Francois; Huyskens, Dominique P

    2014-09-01

    The purpose of the study is to characterize the prototype of the new Octavius1500 (PTW, Freiburg, Germany) 2D ion chamber array, covering its use in different phantom setups, from the most basic solid water sandwich setup to the more complex cylindrical Octavius® 4D (Oct4D) (PTW) phantom/detector combination. The new detector houses nearly twice the amount of ion chambers as its predecessors (Seven29 and Octavius729), thereby tackling one of the most important limitations of ion chamber (or diode) arrays, namely the limited detector density. The 0.06 cm3 cubic ion chambers are now arranged in a checkerboard pattern, leaving no lines (neither longitudinally nor laterally) without detectors. All measurements were performed on a dual energy (6 MV and 18 MV) iX Clinac (Varian Medical Systems, Palo Alto, CA) and all calculations were done in the Eclipse treatment planning system (Varian) with the Anisotropic Analytical Algorithm. First, the basic characteristics of the 2D array, such as measurement stability, dose rate dependence and dose linearity were investigated in the solid water sandwich setup. Second, the directional dependence was assessed to allow the evaluation of the new Octavius2D phantom (Oct2D(1500)) for planar verification measurements of composite plans. Third, measurements were performed in the Oct4D phantom to evaluate the impact of the increased detector density on the accuracy of the volumetric dose reconstruction. While showing equally good dose linearity and dose rate independence, the Octavius1500 outperforms the previous models because of its instantaneous measurement stability and its twofold active area coverage. Orthogonal field-by-field measurements immediately benefit from the increased detector density. The 3.9 cm wide compensation cavity in the new Oct2D(1500) phantom prototype adequately corrects for directional dependence from the rear, resulting in good agreement within the target dose. Discrepancies may arise towards the sides of the

  2. The Octavius1500 2D ion chamber array and its associated phantoms: Dosimetric characterization of a new prototype

    Energy Technology Data Exchange (ETDEWEB)

    Van Esch, Ann, E-mail: ann.vanesch@7sigma.be; Huyskens, Dominique P. [7Sigma, QA-team in radiotherapy physics, Kasteeldreef 2, 3150 Tildonk (Belgium); Radiotherapy Association, Centre Hospitalier Mouscron – Ste Elisabeth Namur, 7700 Mouscron – 5000 Namur (Belgium); Basta, Katarzyna; Evrard, Marie; Ghislain, Michel; Sergent, Francois [Radiotherapy Association, Centre Hospitalier Mouscron – Ste Elisabeth Namur, 7700 Mouscron – 5000 Namur (Belgium)

    2014-09-15

    Purpose: The purpose of the study is to characterize the prototype of the new Octavius1500 (PTW, Freiburg, Germany) 2D ion chamber array, covering its use in different phantom setups, from the most basic solid water sandwich setup to the more complex cylindrical Octavius{sup ®} 4D (Oct4D) (PTW) phantom/detector combination. The new detector houses nearly twice the amount of ion chambers as its predecessors (Seven29 and Octavius729), thereby tackling one of the most important limitations of ion chamber (or diode) arrays, namely the limited detector density. The 0.06 cm{sup 3} cubic ion chambers are now arranged in a checkerboard pattern, leaving no lines (neither longitudinally nor laterally) without detectors. Methods: All measurements were performed on a dual energy (6 MV and 18 MV) iX Clinac (Varian Medical Systems, Palo Alto, CA) and all calculations were done in the Eclipse treatment planning system (Varian) with the Anisotropic Analytical Algorithm. First, the basic characteristics of the 2D array, such as measurement stability, dose rate dependence and dose linearity were investigated in the solid water sandwich setup. Second, the directional dependence was assessed to allow the evaluation of the new Octavius2D phantom (Oct2D{sup 1500}) for planar verification measurements of composite plans. Third, measurements were performed in the Oct4D phantom to evaluate the impact of the increased detector density on the accuracy of the volumetric dose reconstruction. Results: While showing equally good dose linearity and dose rate independence, the Octavius1500 outperforms the previous models because of its instantaneous measurement stability and its twofold active area coverage. Orthogonal field-by-field measurements immediately benefit from the increased detector density. The 3.9 cm wide compensation cavity in the new Oct2D{sup 1500} phantom prototype adequately corrects for directional dependence from the rear, resulting in good agreement within the target dose

  3. Cambios en el uso del suelo y deforestación en el sur de los estados de Campeche y Quintana Roo, México

    Directory of Open Access Journals (Sweden)

    Sergio Cortina Villar

    1999-01-01

    Full Text Available Landsat MSS satellite imagery from 1975 to 1990 were analyzed in order to estimate the rates of conversion of tropical forests and savannas to cropland and pasture in the southern Yucatán Peninsula of Mexico. The area of southeastern Campeche and southern Quintana Roo was subject of a federally financed directed-colonization program during the seventies, which included felling the tropical forests to establish modern agricultural and livestock areas, Although it was believed that most of the area understudy had been deforested, it was found that by the end of the period, 25% of the tropical forests had been deforested and 4-3% of the newly opened agricultural area had been abandoned from the intended cropland and livestock use and covered instead by shrubby or tree secondary vegetation.

  4. A regional-scale groundwater model supporting management of the Sian Ka'an Biosphere Reserve and its catchment, Quintana Roo, Mexico

    DEFF Research Database (Denmark)

    Gondwe, Bibi Ruth Neuman; Merediz Alonso, G.; Rebolledo Vieyra, M.

    2007-01-01

    The Caribbean Coast of the Yucatan Peninsula is a rapidly developing area featuring a booming tourism industry. The number of hotel rooms in the Riviera Maya has increased from 2600 in 1996 to 26,000 in 2005, while the total population in the Mexican federal state of Quintana Roo has grown from 500......,000 in 1990 to 1,115,000 in 2005. This explosive growth threatens the region's water resources, which primarily consist of a less than 50m thick freshwater lens residing in the regional karst aquifer underlying the entire Yucatan Peninsula. The Sian Ka'an Biosphere Reserve, a 6400 km2 combined marine...... of the surrounding areas requires detailed knowledge on the groundwater flow paths in and around the reserve. Moreover, mapping and delineation of its groundwater catchment zone and groundwater traveling time zones is essential. To this end, a regional-scale steady-state groundwater flow model of the Sian Ka...

  5. S'approprier l'altérité : musique afro-caribéenne dans l'État de Quintana Roo, Mexique

    OpenAIRE

    Cunin, Elisabeth

    2014-01-01

    Hierba Santa, Chan Santa Roots, Korto Circuito, Roots and Wisdom, Escuadrón 16 : ce sont quelques-uns des nombreux groupes de musique afro-caribéenne de l'État du Quintana Roo, au sud-est du Mexique, à la frontière avec le Belize. Alors que la région est traditionnellement associée à une culture maya dominante ou au premier métissage au Mexique, j'étudierai l'apparition et la disparition de la musique afrocaribéenne, tout au long du XXe siècle, afin de mieux comprendre, dans une perspective d...

  6. Variables asociadas con el uso de hábitat del manatí del Caribe (Trichechus manatus, en Quintana Roo, México (Mammalia

    Directory of Open Access Journals (Sweden)

    Javier Axis-Arroyo

    1998-09-01

    Full Text Available La influencia de: temperatura atmosférica y del agua, vientos, nubosidad, profundidad, salinidad, abundancia de pastos y algas, y estructura de grupo; en la distribución espacial de Trichechus manatus manatus, fue estudiada en la Bahía de Chetumal, Quintana Roo, México; de noviembre de 1994 a junio de 1995. Las variables con menor asociación fueron: nubosidad y temperatura atmosférica y del agua (en contraste con lo reportado para la subespecie de Florida, Trichechus manatus latirostris; las variables con asociación moderada fueron: salinidad (como en Florida, profundidad (uso frecuente de profundidades entre 0.80 y 2 m y estructura de grupo (lo cual sugiere que la zona no es importante como área de apareamiento. La distribución espacial fue asociada principalmente con cambios drásticos en la intensidad del viento y con el alimento disponible (similar a trabajos previos realizados en México.Influence of atmospheric variables and water temperature, winds, cloudiness, depth, salinity, grass and algal abundance, and group structure on the spatial distribution of Trichechus manatus manatus was studied in Chetumal Bay, Quintana Roo, Mexico. Boat surveys were done from November 1994 trough June 1995. There was little association with cloudiness and atmospheric and water temperature (in contrast with reports for the Florida subspecies, Trichechus manatus latirostris; the variables with moderate association were salinity (as in Florida, depth (frequent use of depths between 0.80-2 m and group structure (which suggests that the zone is not an important mating area. Spatial distribution was more associated with drastic changes in wind intensity and the available food (similar to previous works in Mexico.

  7. Loss of ions in cavity ionization chambers

    Energy Technology Data Exchange (ETDEWEB)

    Takata, N. [Ionizing Radiation Section, NMIJ/AIST, Tsukuba 305-8568 (Japan)]. E-mail: n.takata@aist.go.jp; Tran, N.T. [Institute for Nuclear Science and Technique, VAEC, Hanoi (Viet Nam); Kim, E. [Radiation Safety Section, NIRS, Inageku, Chiba-city 263-8555 (Japan); Marsoem, P. [P3KRBiN-BATAN, JL Cinere-Pasar Jum' at, Jakarta 12070 (Indonesia); Kurosawa, T. [Ionizing Radiation Section, NMIJ/AIST, Tsukuba 305-8568 (Japan); Koyama, Y. [Ionizing Radiation Section, NMIJ/AIST, Tsukuba 305-8568 (Japan)

    2005-12-01

    Ion losses due to initial recombination, volume recombination, and back diffusion were each determined by measurements and calculations for different size cylindrical ionization chambers and spherical ionization chambers. By measuring signal currents from these ionization chambers irradiated with {sup 60}Co gamma rays, two groups of ion losses were obtained. (Group 1) Ion loss due to initial recombination and diffusion, which changes proportionally to the inverse of the voltage applied to the ionization chambers; (and group 2) ion loss due to volume recombination, which changes proportionally to the inverse of the square of the applied voltage. The diffusion loss was obtained separately by computing electric field distributions in the ionization chambers. It was found that diffusion loss is larger than initial recombination loss for the cylindrical ionization chambers and vise versa for the spherical ionization chambers.

  8. Pupillary block glaucoma following implantation of a posterior chamber pseudophakos in the anterior chamber.

    Directory of Open Access Journals (Sweden)

    Mandal Anil

    2002-01-01

    Full Text Available Pupillary block glaucoma is a common complication of cataract surgery, especially following anterior chamber intraocular lens implantation. We report a case of pupillary block glaucoma with a posterior chamber IOL that was implanted in the anterior chamber following a complicated extracapsular cataract extraction. The case was successfully managed by explantation of the posterior chamber lens, anterior vitrectomy, peripheral iridectomy and secondary anterior chamber intraocular lens implantation. The intraocular pressure was controlled with a single topical antiglaucoma medication.

  9. Basic Aerodynamics of Combustion Chambers,

    Science.gov (United States)

    1981-05-20

    8217, tie imnrulse foree eyuilibr-um c’ the bomd’~ leye - is 173 pv-:irJ p~76vJbK 2sO) IL !-. = Zn pT -- a , bV T. z -,,r y.re C era 3oia * ~~I" onc art-=e...heat by combustion all have very large influences on the capabilities of a combustion chamber. A yellow- colored flame represents diffusion combustion in...the wakes of fuel droplets. Blue- colored flames represent gaseous combustion of evaporated vapors which have already left the fuel droplets. The

  10. Physicist makes muon chamber sing

    CERN Document Server

    2007-01-01

    This Monitored Drift Tube detector, consisting of argon-CO2-filled aluminium tubes with a wire down the centre of each, will track muons in ATLAS; Tiecke used a single tube from one of these detectors to create the pipes in his organ. Particle physicists can make good musicians; but did you know particle detectors can make good music? That's what NIKHEF physicist Henk Tiecke learned when he used pipes cut from the ATLAS Monitored Drift Tube detector (MDT) to build his own working Dutch-style barrel organ in the autumn of 2005. 'I like to work with my hands,' said Tiecke, who worked as a senior physicist at NIKHEF, Amsterdam, on ZEUS until his retirement last summer. Tiecke had already constructed his barrel organ when he visited some colleagues in the ATLAS muon chambers production area at Nikhef in 2005. He noticed that the aluminium tubes they were using to build the chambers were about three centimetres in diameter-just the right size for a pipe in a barrel organ. 'The sound is not as nice as from wooden...

  11. Limits to Drift Chamber Resolution

    CERN Document Server

    Riegler, Werner

    1998-01-01

    ATLAS (A Large Toroidal LHC Apparatus) will be a general-purpose experiment at the Large Hadron Collider that will be operational at CERN in the year 2004. The ATLAS muon spectrometer aims for a momentum resolution of 10% for a transverse momentum of pT=1TeV. The precision tracking devices in the muon system will be high pressure drift tubes (MDTs) with a single wire resolution of 1100 chambers covering an area of ≈ 2500m2. The high counting rates in the spectrometer as well as the aim for excellent spatial resolution and high efficiency put severe constraints on the MDT operating parameters. This work describes a detailed study of all the resolution limiting factors in the ATLAS environment. A ’full chain’ simulation of the MDT response to photons and charged particles as well as quantitative comparisons with measurements was performed. The good agreement between simulation and measurements resulted in a profound understanding of the drift chamber processes and the individual contributions to the spat...

  12. Transferring calibration coefficients from ionisation chambers used for diagnostic radiology to transmission chambers.

    Science.gov (United States)

    Yoshizumi, Maíra T; Caldas, Linda V E

    2012-07-01

    In this work, the response of a double volume transmission ionisation chamber, developed at the Instituto de Pesquisas Energéticas e Nucleares, was compared to that of a commercial transmission chamber. Both ionisation chambers were tested in different X-ray beam qualities using secondary standard ionisation chambers as reference dosimeters. These standard ionisation chambers were a parallel-plate and a cylindrical ionisation chambers, used for diagnostic radiology and mammography beam qualities, respectively. The response of both transmission chambers was compared to that of the secondary standard chambers to obtain coefficients of equivalence. These coefficients allow the transmission chambers to be used as reference equipment. Copyright © 2011 Elsevier Ltd. All rights reserved.

  13. Correction factors for ionization chamber dosimetry in CyberKnife: Machine-specific, plan-class, and clinical fields

    Energy Technology Data Exchange (ETDEWEB)

    Gago-Arias, Araceli; Antolin, Elena; Fayos-Ferrer, Francisco; Simon, Rocio; Gonzalez-Castano, Diego M.; Palmans, Hugo; Sharpe, Peter; Gomez, Faustino; Pardo-Montero, Juan [Departamento de Fisica de Particulas, Facultad de Fisica, Universidade de Santiago de Compostela, A Coruna 15782 (Spain); Servicio de Fisica Medica, Hospital Ruber Internacional, Madrid 28034 (Spain); Departamento de Fisica de Particulas, Facultad de Fisica, Universidade de Santiago de Compostela, A Coruna 15782, Spain and Laboratorio de Radiofisica, Universidade de Santiago de Compostela, Santiago de Compostela, A Coruna 15782 (Spain); National Physical Laboratory, Teddington, Middx TW11 OLW (United Kingdom); Departamento de Fisica de Particulas, Facultad de Fisica, Universidade de Santiago de Compostela, A Coruna 15782, Spain and Laboratorio de Radiofisica, Universidade de Santiago de Compostela, Santiago de Compostela, A Coruna 15782 (Spain); Departamento de Fisica de Particulas, Facultad de Fisica, Universidade de Santiago de Compostela, A Coruna 15782 (Spain)

    2013-01-15

    Purpose: The aim of this work is the application of the formalism for ionization chamber reference dosimetry of small and nonstandard fields [R. Alfonso, P. Andreo, R. Capote, M. S. Huq, W. Kilby, P. Kjaell, T. R. Mackie, H. Palmans, K. Rosser, J. Seuntjens, W. Ullrich, and S. Vatnitsky, 'A new formalism for reference dosimetry of small and nonstandard fields,' Med. Phys. 35, 5179-5186 (2008)] to the CyberKnife robotic radiosurgery system. Correction factors for intermediate calibration fields, a machine-specific reference field (msr) and two plan-class specific reference fields (pcsr), have been studied. Furthermore, the applicability of the new formalism to clinical dosimetry has been analyzed through the investigation of two clinical treatments. Methods: PTW31014 and Scanditronix-Wellhofer CC13 ionization chamber measurements were performed for the fields under investigation. Absorbed dose to water was determined using alanine reference dosimetry, and experimental correction factors were calculated from alanine to ionization chamber readings ratios. In addition, correction factors were calculated for the intermediate calibration fields and one of the clinical treatment fields using the Monte Carlo method and these were compared with the experimental values. Results: Overall correction factors deviating from unity by approximately 2% were obtained from both measurements and simulations, with values below and above unity for the studied intermediate calibration fields and clinical fields for the ionization chambers under consideration. Monte Carlo simulations yielded correction factors comparable with those obtained from measurements for the machine-specific reference field, although differences from 1% to 3.3% were observed between measured and calculated correction factors for the composite intermediate calibration fields. Dose distribution inhomogeneities are thought to be responsible for such discrepancies. Conclusions: The differences found between

  14. Ion distributions in plane and cylindrical chambers.

    Science.gov (United States)

    Rosen, R; George, E P

    1975-11-01

    The ion chamber equations of Thomson include both ion recombination and space-charge terms. Neglecting the space-charge term, an exact solution is obtained for the ion densities across a plane ionization chamber. The method is extended to the cylindrical chamber, and examples are given of the expected ion distributions in both geometries. Current-voltage relationships are derived for both chambers and compared with those of other workers. If the space-charge term is retained, the ion chamber equations for both geometries are not soluble in closed form. The cylindrical chamber is considered and a computer solution is obtained for the ion distributions and current. Comparison with the nonspace-charge solution shows that while there is only a small difference in the current-voltage relationship, a significant difference can occur in the ion concentrations.

  15. A mathematical model of aerosol holding chambers

    DEFF Research Database (Denmark)

    Zak, M; Madsen, J; Berg, E

    1999-01-01

    A mathematical model of aerosol delivery from holding chambers (spacers) was developed incorporating tidal volume (VT), chamber volume (Vch), apparatus dead space (VD), effect of valve insufficiency and other leaks, loss of aerosol by immediate impact on the chamber wall, and fallout of aerosol...... in the chamber with time. Four different spacers were connected via filters to a mechanical lung model, and aerosol delivery during "breathing" was determined from drug recovery from the filters. The formula correctly predicted the delivery of budesonide aerosol from the AeroChamber (Trudell Medical, London......, Ontario, Canada), NebuChamber (Astra, Södirtälje, Sweden) and Nebuhaler (Astra) adapted for babies. The dose of fluticasone proportionate delivered by the Babyhaler (Glaxco Wellcome, Oxbridge, Middlesex, UK) was 80% of that predicted, probably because of incomplete priming of this spacer. Of the above...

  16. Tests of anechoic chamber for aeroacoustics investigations

    Science.gov (United States)

    Palchikovskiy, V. V.; Bersenev, Yu. V.; Makashov, S. Yu.; Belyaev, I. V.; Korin, I. A.; Sorokin, E. V.; Khramtsov, I. V.; Kustov, O. Yu.

    2016-10-01

    The paper presents the results of qualification tests in the new anechoic chamber of Perm National Research Polytechnic University (PNRPU) built in 2014-2015 and evaluation of the chamber quality in aeroacoustic experiments. It describes design features of the chamber and its sound-absorption lining. The qualification tests were carried out with tonal and broadband noise sources in the frequency range 100 Hz - 20 kHz for two different cases of the source arrangement. In every case, measurements were performed in three directions by traverse microphones. Qualification tests have determined that in the chamber there is a free acoustic field within radius of 2 m for tonal noise and 3 m for broadband noise. There was also evaluated acoustic quality of the chamber by measurements of the jet noise and vortex ring noise. The results of the experiments demonstrate that PNRPU anechoic chamber allows the aeroacoustic measurements to be performed to obtain quantitative results.

  17. The CAST Time Projection Chamber

    CERN Document Server

    Autiero, D; Cébrian, S; Carmona, J M; Chesi, Enrico Guido; Davenport, M; Delattre, M; Di Lella, L; Formenti, F; Gomez, H; Hasinoff, M; Irastorza, I G; Lakic, B; Luzón, G; Morales, J; Musa, L; Ortiz, A; Placci, A; Rodríguez, A; Ruz, J; Villar, J A; Zioutas, K

    2007-01-01

    One of the three X-ray detectors of the CAST experiment searching for solar axions is a Time Projection Chamber (TPC) with a multi-wire proportional counter (MWPC) as a readout structure. Its design has been optimized to provide high sensitivity to the detection of the low intensity X-ray signal expected in the CAST experiment. A low hardware threshold of 0.8 keV is safely set during normal data taking periods, and the overall efficiency for the detection of photons coming from conversion of solar axions is 62 %. Shielding has been installed around the detector, lowering the background level to 4.10 x 10^-5 counts/cm^2/s/keV between 1 and 10 keV. During phase I of the CAST experiment the TPC has provided robust and stable operation, thus contributing with a competitive result to the overall CAST limit on axion-photon coupling and mass.

  18. The ARGUS microvertex drift chamber

    Science.gov (United States)

    Michel, E.; Schmidt-Parzefall, W.; Appuhn, R. D.; Buchmüller, J.; Kolanoski, H.; Kreimeier, B.; Lange, A.; Siegmund, T.; Walther, A.; Edwards, K. W.; Fernholz, R. C.; Kapitza, H.; MacFarlane, D. B.; O'Neill, M.; Parsons, J. A.; Prentice, J. D.; Seidel, S. C.; Tsipolitis, G.; Ball, S.; Babaev, A.; Danilov, M.; Tichomirov, I.

    1989-11-01

    The ARGUS collaboration is currently building a new microvertex drift chamber (μVDC) as an upgrade of their detector. The μVDC is optimized for B-meson physics at DORIS energies. Important design features are minimal multiple scattering for low-momentum particles and three-dimensional reconstruction of decay vertices with equal resolutions in r- φ and r- z. Vertex resolutions of 15-25 μm are expected. Prototypes of the μVDC have been tested with different gas mixtures at various pressures. Spatial resolutions as small as 20 μm were obtained using CO 2/propane at 4 bar and DME at 1 bar. New readout electronics have been developed for the μVDC aiming at low thresholds for the TDC measurements. Employing a novel idea for noise and cross-talk suppression, which is based on a discrimination against short pulses, very low threshold settings are possible.

  19. Drift chamber tracking with neural networks

    Energy Technology Data Exchange (ETDEWEB)

    Lindsey, C.S.; Denby, B.; Haggerty, H.

    1992-10-01

    We discuss drift chamber tracking with a commercial log VLSI neural network chip. Voltages proportional to the drift times in a 4-layer drift chamber were presented to the Intel ETANN chip. The network was trained to provide the intercept and slope of straight tracks traversing the chamber. The outputs were recorded and later compared off line to conventional track fits. Two types of network architectures were studied. Applications of neural network tracking to high energy physics detector triggers is discussed.

  20. Vacuum Chamber for the Booster Bending Magnets

    CERN Multimedia

    1974-01-01

    To minimize eddy currents, induced by the rising magnetic field, the chamber was made from thin stainless steel of high specific electric resistance. For mechanical stength, it was corrugated in a hydro-forming process. The chamber is curved, to follow the beam's orbital path. Under vacuum, the chamber tends to staighten, the ceramic spacer along half of its length keeps it in place (see also 7402458).

  1. Bubble chamber: Omega production and decay

    CERN Multimedia

    1973-01-01

    This image is taken from one of CERN's bubble chambers and shows the decay of a positive kaon in flight. The decay products of this kaon can be seen spiraling in the magnetic field of the chamber. The invention of bubble chambers in 1952 revolutionized the field of particle physics, allowing real tracks left by particles to be seen and photographed by expanding liquid that has been heated to boiling point.

  2. Free-Flow Open-Chamber Electrophoresis

    Science.gov (United States)

    Sharnez, Rizwan; Sammons, David W.

    1994-01-01

    Free-flow open-chamber electrophoresis variant of free-flow electrophoresis performed in chamber with open ends and in which velocity of electro-osmotic flow adjusted equal to and opposite mean electrophoretic velocity of sample. Particles having electrophoretic mobilities greater than mean mobility of sample particles move toward cathode, those with mobilities less move toward anode. Technique applied to separation of components of mixtures of biologically important substances. Sensitivity enhanced by use of tapered chamber.

  3. Engineering verification of the biomass production chamber

    Science.gov (United States)

    Prince, R. P.; Knott, W. M., III; Sager, J. C.; Jones, J. D.

    1992-01-01

    The requirements for life support systems, both biological and physical-chemical, for long-term human attended space missions are under serious study throughout NASA. The KSC 'breadboard' project has focused on biomass production using higher plants for atmospheric regeneration and food production in a special biomass production chamber. This chamber is designed to provide information on food crop growth rate, contaminants in the chamber that alter plant growth requirements for atmospheric regeneration, carbon dioxide consumption, oxygen production, and water utilization. The shape and size, mass, and energy requirements in relation to the overall integrity of the biomass production chamber are under constant study.

  4. The Mark II Vertex Drift Chamber

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, J.P.; Baggs, R.; Fujino, D.; Hayes, K.; Hoard, C.; Hower, N.; Hutchinson, D.; Jaros, J.A.; Koetke, D.; Kowalski, L.A.

    1989-03-01

    We have completed constructing and begun operating the Mark II Drift Chamber Vertex Detector. The chamber, based on a modified jet cell design, achieves 30 {mu}m spatial resolution and <1000 {mu}m track-pair resolution in pressurized CO{sub 2} gas mixtures. Special emphasis has been placed on controlling systematic errors including the use of novel construction techniques which permit accurate wire placement. Chamber performance has been studied with cosmic ray tracks collected with the chamber located both inside and outside the Mark II. Results on spatial resolution, average pulse shape, and some properties of CO{sub 2} mixtures are presented. 10 refs., 12 figs., 1 tab.

  5. Precision Radio Frequency Anechoic Chamber Facility

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Performs measurements and calibration of antennas for satellites and aircraft or groundbased systems. The chamber is primarily used for optimizing antenna...

  6. Bicone vacuum chamber for ISR intersection

    CERN Document Server

    1975-01-01

    This is one of the bicone chambers made of titanium for experiment R 702. The central corrugated part had a very thin titanium wall (0.28 mm). The first of these chambers collapsed in its central part when baked at 300 C (August 1975). After an intensive effort to develop better quality and reproducible welds for this special material, the ISR workshop was able to build two new chambers of this type. One of them was installed at I 7 for R 702 in 1976 and worked perfectly. It was at that time the most "transparent" intersection vacuum chamber. See also 7609219, 7609221.

  7. Variación estacional de lípidos en varios tejidos del cambute Strombus gigas (Mesogastropoda: Strombidae, en Quintana Roo, México

    Directory of Open Access Journals (Sweden)

    Nancy Brito Manzano

    1998-09-01

    Full Text Available Se determinó la variación mensual de lípidos en varios tejidos del cambute Strombus gigas (L., en Banco Chinchorro, Quintana Roo, México durante un año. La longitud de la heliconcha fue 209 ± 1 mm, la del cuerpo 137 ± 1 mm, la de la espira 100 ± 1 mm y el peso húmedo total 1 826 ± 7 g. La media del contenido de lípidos en la gónada-glándula digestiva fue 4.27 g% (machos 4.01 g% y hembras 4.50 g%. El contenido de lípidos en gónada-glándula digestiva mostró diferencias sexuales significativas (p Strombus gigas samples were collected in Banco Chinchorro, Quintana Roo, Mexico (18°47'-18°23' N; 87°14' W. Shell, body and spire lenght were measured. Fat content of gonad, digestive gland and meat of male and female conchs, was analyzed by the standard and microsoxhlet methods on a monthly basis for a year. Mean lenght for shell, body and spire were 209 ± 1 mm, 137 ±1 mm and 100 ± 1 mm, respectively. Total wet weigth was 1 826 ± 7 g. Fat content in gonad-digestive gland was 1.27-9.33 g% with a mean of 4.27 g% and in meat 0.41-5.03 g% with a mean of 2.15 g%. Fat content in female gonad-digestive gland was 1.27 g% at 8.57 g% with a mean of 4.50 g%; in male: 1.87 g% at 9.33 g% with a mean of 4.01 g%. Sexes differed (t student P < 0.05. Mean fat content in meat was 2.15 g%, (males 1.97 g%, females 2.3 g%. There was not significant sexual difference for meat fat content. There was a difference between gonad-digestive gland and meat (t student P < 0.05. However, from February to September meat lipid content exceeds the percentage recommended for human consumption by the FAO.

  8. Raymond J. Chambers--A Personal Reflection

    Science.gov (United States)

    Gaffikin, Michael

    2012-01-01

    This paper is presented as a tribute to Raymond J. Chambers. As its title suggests, it is a personal reflection through the eyes of someone who worked closely with him over a period of 10 years during a latter part of his career, and who completed a doctoral thesis with aspects of the work of Chambers as its subject. During this time, author…

  9. Results from the MAC Vertex chamber

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, H.N.

    1987-05-01

    The design, construction, and performance characteristics of a high precision gaseous drift chamber made of thin walled proportional tubes are described. The device achieved an average spatial resolution of 45 ..mu..m in use for physics analysis with the MAC detector. The B-lifetime result obtained with this chamber is discussed.

  10. 21 CFR 866.2120 - Anaerobic chamber.

    Science.gov (United States)

    2010-04-01

    ... and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Microbiology Devices § 866.2120 Anaerobic chamber. (a) Identification. An anaerobic chamber is a device intended for medical purposes to maintain an anaerobic...

  11. Supersonic Jet Interactions in a Plenum Chamber

    Directory of Open Access Journals (Sweden)

    K. M. Venugopal

    2004-07-01

    Full Text Available Understanding thè supersonic jet interactions in a plenum chamber is essential for thè design of hot launch systems. Static tests were conducted in a small-scale rocket motor ioaded with a typical nitramine propellaiit to produce a nozzle exit Mach number of 3. This supersonic jet is made to interact with plenum chambers having both open and closed sides. The distance between thè nozzle exit and thè back piate of plenum chamber are varied from 2. 5 to 7. 0 times thè nozzle exit diameter. The pressure rise in thè plenum chamber was measured using pressure transducers mounted at different locatìons. The pressure-time data were analysed to obtain an insight into thè flow field in thè plenum chamber. The maximum pressure exerted on thè back piate of plenum chamber is about 25-35 per cent. of thè maximum stagnation pressure developed in thè rocket motor. Ten static tests were carried out to obtain thè effect of axial distance between thè nozzle exit and thè plenum chamber back piate, and stagnation pressure in thè rocket motoron thè flow field in thè open-sided and closed-sided plenum chambers configurations.

  12. An ionization chamber with magnetic levitated electrodes

    CERN Document Server

    Kawaguchi, T

    1999-01-01

    A new type of ionization chamber which has magnetically levitated electrodes has been developed. The electrodes are supplied voltages for the repelling of ions by a battery which is also levitated with the electrodes. The characteristics of this ionization chamber are investigated in this paper.

  13. ME1/1 Cathode Strip Chambers

    CERN Document Server

    Erchov, Yu V; Kamenev, Alexey; Karjavin, Vladimir; Khabarov, Serguei; Moissenz, P V; Moissenz, K P; Movchan, Sergey; Perelygin, Victor; Vassiliev, S E; Zarubin, Anatoli; Tchekhovski, V A

    2008-01-01

    The 76 innermost ME1/1 cathode strip chambers (CSC) of the CMS Experiment were designed and produced in Dubna. The chambers have been installed in the detector and commissioning has been completed. This paper describes the design of the CSCs, their main mechanical parameters and read-out electronics, and the results of tests with cosmic-ray muons.

  14. HVAC&R Equipment Environmental Chambers

    Data.gov (United States)

    Federal Laboratory Consortium — Description:Large "Truck" ChamberThe large "truck" chamber provides controlled air conditions from -7 °C (20 °F) to 65 °C (150 °F).Air-Conditioner and Heat Pump Test...

  15. The SAMURAI Time Projection Chamber

    Science.gov (United States)

    Dye, Steven

    2011-10-01

    The SAMURAI Time Projection Chamber (TPC) will be used to study particle collisions by colliding a beam of particles with a stationary gas which will be contained in a field cage inside the TPC. When the beam collides with the gas, charged particles are accelerated into the pad plane by an electric field. The paths of these particles will be curved by a magnetic field created by the SAMURAI magnet at the RIKEN facility in Japan. The charged particles will then collide with the pad plane which will be located on the bottom of the TPC. The pad plane will take these collisions and create electrical signals and send them to supporting electronics where the data can be interpreted. The TPC will be used to help determine the Equation of State for asymmetric nuclear matter. Measurements of neutron, proton, 3H and 3He flow will be taken with the NEBULA array which consists of nebula scintillators. The poster will contain information on the laser calibration system and the electronics that will be used for the TPC. The electronics used are the same electronics used in the STAR TPC experiment.

  16. The CAST time projection chamber

    Science.gov (United States)

    Autiero, D.; Beltrán, B.; Carmona, J. M.; Cebrián, S.; Chesi, E.; Davenport, M.; Delattre, M.; Di Lella, L.; Formenti, F.; Irastorza, I. G.; Gómez, H.; Hasinoff, M.; Lakic, B.; Luzón, G.; Morales, J.; Musa, L.; Ortiz, A.; Placci, A.; Rodrigurez, A.; Ruz, J.; Villar, J. A.; Zioutas, K.

    2007-06-01

    One of the three x-ray detectors of the CERN Axion Solar Telescope (CAST) experiment searching for solar axions is a time projection chamber (TPC) with a multi-wire proportional counter (MWPC) as a readout structure. Its design has been optimized to provide high sensitivity to the detection of the low intensity x-ray signal expected in the CAST experiment. A low hardware threshold of 0.8 keV is set to a safe level during normal data taking periods, and the overall efficiency for the detection of photons coming from conversion of solar axions is 62%. Shielding has been installed around the detector, lowering the background level to 4.10 × 10-5 counts cm-2 s-1 keV-1 between 1 and 10 keV. During phase I of the CAST experiment the TPC has provided robust and stable operation, thus contributing with a competitive result to the overall CAST limit on axion photon coupling and mass.

  17. Lineamientos generales del programa de seguimiento permanente del perfil y grado de satisfacción del turista que visita la Zona Maya de Quintana Roo

    Directory of Open Access Journals (Sweden)

    María de Jesús Moo Canul

    2012-01-01

    Full Text Available Un programa de seguimiento para la Zona Maya de Quintana Roo (ZOMAQRoo debe considerar las limitaciones de acceso propias de la zona, procurando cumplir con el objetivo de provisión oportuna de indicadores básicos tomar decisiones estratégicas: el perfil y grado de satisfacción del turista. A partir de los resultados del estudio del perfil y grado de satisfacción del turista que visita la ZOMAQRoo, realizado en 2010 y 2011, se planteó la metodología de esta propuesta. Para ello, se revisó literatura de la disciplina turística y de otros sectores, con el fin de diseñar la estructura de los lineamientos del programa de seguimiento. Éstos se plantean en tres etapas: identificación de los grupos clave y sociabilización del programa; instauración del sistema informatizado de información relacionada con la gestión turística; impartición de talleres y cursos de capacitación para la implementación del programa. Para asegurar la colaboración participativa, se incluye en este estudio la cooperación del sector público y privado considerando la identificación de grupos clave.

  18. The Utility of Inquiry-Based Exercises in Mexican Science Classrooms: Reports from a Professional Development Workshop for Science Teachers in Quintana Roo, Mexico

    Science.gov (United States)

    Racelis, A. E.; Brovold, A. A.

    2010-12-01

    The quality of science teaching is of growing importance in Mexico. Mexican students score well below the world mean in math and science. Although the government has recognized these deficiencies and has implemented new policies aimed to improve student achievement in the sciences, teachers are still encountering in-class barriers to effective teaching, especially in public colleges. This paper reports on the utility of inquiry based exercises in Mexican classrooms. In particular, it describes a two-day professional development workshop with science teachers at the Instituto Tecnologico Superior in Felipe Carrillo Puerto in the Mexican state of Quintana Roo. Felipe Carrillo Puerto is an indigenous municipality where a significant majority of the population speak Maya as their first language. This alone presents a unique barrier to teaching science in the municipality, but accompanied with other factors such as student apathy, insufficient prior training of both students and teachers, and pressure to deliver specific science curriculum, science teachers have formidable challenges for effective science teaching. The goals of the workshop were to (1) have a directed discussion regarding science as both content and process, (2) introduce inquiry based learning as one tool of teaching science, and (3) get teachers to think about how they can apply these techniques in their classes.

  19. Monitored Drift Chambers in the ATLAS Detector

    CERN Multimedia

    Herten, G

    Monitored Drift Chambers (MDT) are used in the ATLAS Detector to measure the momentum of high energy muons. They consist of drift tubes, which are filled with an Ar-CO2 gas mixture at 3 bar gas pressure. About 1200 drift chambers are required for ATLAS. They are up to 6 m long. Nevertheless the position of every wire needs to be known with a precision of 20 µm within a chamber. In addition, optical alignment sensors are required to measure the relative position of adjacent chambers with a precision of 30µm. This gigantic task seems impossible at first instance. Indeed it took many years of R&D to invent the right tools and methods before the first chamber could be built according to specifications. Today, at the time when 50% of the chambers have been produced, we are confident that the goal for ATLAS can be reached. The mechanical precision of the chambers could be verified with the x-ray tomograph at CERN. This ingenious device, developed for the MDT system, is able to measure the wire position insid...

  20. Making MUSIC: A multiple sampling ionization chamber

    Energy Technology Data Exchange (ETDEWEB)

    Shumard, B. [Argonne National Laboratory, Building 203 H-113, Argonne, IL 60439 (United States)]. E-mail: shumard@phy.anl.gov; Henderson, D.J. [Argonne National Laboratory, Building 203 H-113, Argonne, IL 60439 (United States); Rehm, K.E. [Argonne National Laboratory, Building 203 H-113, Argonne, IL 60439 (United States); Tang, X.D. [Argonne National Laboratory, Building 203 H-113, Argonne, IL 60439 (United States)

    2007-08-15

    A multiple sampling ionization chamber (MUSIC) was developed for use in conjunction with the Atlas scattering chamber (ATSCAT). This chamber was developed to study the ({alpha}, p) reaction in stable and radioactive beams. The gas filled ionization chamber is used as a target and detector for both particles in the outgoing channel (p + beam particles for elastic scattering or p + residual nucleus for ({alpha}, p) reactions). The MUSIC detector is followed by a Si array to provide a trigger for anode events. The anode events are gated by a gating grid so that only ({alpha}, p) reactions where the proton reaches the Si detector result in an anode event. The MUSIC detector is a segmented ionization chamber. The active length of the chamber is 11.95 in. and is divided into 16 equal anode segments (3.5 in. x 0.70 in. with 0.3 in. spacing between pads). The dead area of the chamber was reduced by the addition of a Delrin snout that extends 0.875 in. into the chamber from the front face, to which a mylar window is affixed. 0.5 in. above the anode is a Frisch grid that is held at ground potential. 0.5 in. above the Frisch grid is a gating grid. The gating grid functions as a drift electron barrier, effectively halting the gathering of signals. Setting two sets of alternating wires at differing potentials creates a lateral electric field which traps the drift electrons, stopping the collection of anode signals. The chamber also has a reinforced mylar exit window separating the Si array from the target gas. This allows protons from the ({alpha}, p) reaction to be detected. The detection of these protons opens the gating grid to allow the drift electrons released from the ionizing gas during the ({alpha}, p) reaction to reach the anode segment below the reaction.

  1. SU-E-T-150: Brachytherapy QA Employing a High Resolution Liquid Filled Ionisation Chamber Array: Initial Experience and Limitations

    Energy Technology Data Exchange (ETDEWEB)

    Gainey, M; Kollefrath, M; Bruggmoser, G [University Medical Centre Freiburg, Freiburg Im Breisgau, Baden-Wuerttemberg (Germany)

    2015-06-15

    Purpose: Verifying a complex 3D brachytherapy dose distribution by measurement is non-trivial. Ideally a photon detector array should be independent of energy and angle, have high spatial resolution and be robust for routine clinical use. Methods: An iridium-192 source was used. A PMMA jig was constructed comprising an outer slab and a central insert with eight milled channels for 1.33mm (outer diameter) steel needles, see figure. All calculations were performed using an empty CT study reconstructing eight virtual needles (QA-CT), using the v2 source model (Elekta AG, Sweden). A high resolution liquid filled ionisation chamber array SRS1000, together with Verisoft software v6.0 (PTW Freiburg, Germany), was used to perform measurements of plans of increasing complexity to evaluate its suitability for device- and patient-specific QA. The dimension of backscatter material was investigated. The patient plan dwell time distribution was entered manually into the QA-CT and the dose distribution was calculated. Results: Our measurements indicate that the array is independent of energy and angle. The resulting measured dose values are linearly interpolated to 2025 values. Shifts of 1mm of the entire needle are readily detectable. Individual dwell position shifts (2.5mm) are also readily measurable. Moreover a dwell time increase of 1 second both in the edge and central region are detectable. Conclusion: The high resolution SRS1000 array is a powerful instrument for brachytherapy QA enabling 977 simultaneous measurements to be performed. Our measurements suggest 60mm of RW3 backscatter material upstream and downstream are sufficient. Local percentage difference analysis is useful for device based QA, normalized relative percentage difference is arguably better for patient specific QA. Automated transfer of patient plan dwell time distribution to the QA plan is required to enable a comprehensive patient QA study to be performed. Moreover the described measurement technique

  2. Sample chambers with mother-daughter mode

    Energy Technology Data Exchange (ETDEWEB)

    Wilk, P.A.; Gregorich, K.E.; Hoffman, D.C.

    2001-07-12

    A set of eight stand-alone sample chambers with a common interface were constructed at LBNL for improved detection of alpha and fission decay chains over currently used designs. The stainless steel chambers (see Figure 1 for a schematic and Figure 2 for a photograph of a completed chamber) were constructed to allow for low background detection of a daughter event by removal of the sample following the detection of a parent event. This mother-daughter mode of operation has been utilized successfully with our Merry-go-Round (MG) detection system [Gregorich 1994].

  3. Radiation-induced foil electret chamber

    Science.gov (United States)

    Fallone, B. G.; Podgorsak, E. B.

    1983-10-01

    Saturation current densities, extrapolated electric fields, and electret-charging and -discharging current-density profiles in an ionization electret chamber are discussed as a function of various chamber parameters, such as air-gap and polymer thickness, polarizing electrode material, exposure rate, etc. Both the saturation current density and the extrapolated electric field consist of two components; one is linear with the air-gap thickness and is attributed to primary ionization in air, and the other exhibits exponential saturation and is attributed to air ionization caused by photoelectrons backscattered into the chamber sensitive volume from the polarizing electrode.

  4. LEP vacuum chamber, cross-section

    CERN Multimedia

    CERN PhotoLab

    1983-01-01

    Cross-section of the final prototype for the LEP vacuum chamber. The elliptic main-opening is for the beam. The small channel to the left is for the cooling water, to carry away the heat deposited by the synchrotron radiation. The square channel to the right houses the Non-Evaporable Getter (NEG) pump. The chamber is made from extruded aluminium. Its outside is clad with lead, to stop the synchrotron radiation emitted by the beam. For good adherence between Pb and Al, the Al chamber was coated with a thin layer of Ni. Ni being slightly magnetic, some resulting problems had to be overcome. See also 8301153.

  5. Bubble chamber: Omega production and decay

    CERN Multimedia

    1973-01-01

    This image is of real particle tracks taken from the CERN 2 m liquid hydrogen bubble chamber and shows the production and decay of a negative omega particle. A negative kaon enters the chamber which decays into many particles, including a negative omega that travels a short distance before decaying into more particles. The invention of bubble chambers in 1952 revolutionized the field of particle physics, allowing real tracks left by particles to be seen and photographed by expanding liquid that had been heated to boiling point.

  6. A mathematical model of aerosol holding chambers

    DEFF Research Database (Denmark)

    Zak, M; Madsen, J; Berg, E

    1999-01-01

    in the chamber with time. Four different spacers were connected via filters to a mechanical lung model, and aerosol delivery during "breathing" was determined from drug recovery from the filters. The formula correctly predicted the delivery of budesonide aerosol from the AeroChamber (Trudell Medical, London......, Ontario, Canada), NebuChamber (Astra, Södirtälje, Sweden) and Nebuhaler (Astra) adapted for babies. The dose of fluticasone proportionate delivered by the Babyhaler (Glaxco Wellcome, Oxbridge, Middlesex, UK) was 80% of that predicted, probably because of incomplete priming of this spacer. Of the above...

  7. Weld Development for Aluminum Fission Chamber

    Energy Technology Data Exchange (ETDEWEB)

    Cross, Carl Edward [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Martinez, Jesse Norris [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-05-16

    The Sigma welding team was approached to help fabricate a small fission chamber (roughly ½ inch dia. x ½ inch tall cylinder). These chambers are used as radiation sensors that contain small traces of radionuclides (Cf 252, U 235, and U 238) that serve to ionize gas atoms in addition to external radiation. When a voltage is applied within the chamber, the resulting ion flow can be calibrated and monitored. Aluminum has the advantage of not forming radioactive compounds when exposed to high external radiation (except from minor Na alloy content). Since aluminum has not been used before in this application, this presented an unexplored challenge.

  8. APS Storage Ring vacuum chamber fabrication

    Energy Technology Data Exchange (ETDEWEB)

    Goeppner, G.A.

    1990-01-01

    The 1104-m circumference Advanced Photon Source Storage Ring Vacuum System is composed of 240 individual sections, which are fabricated from a combination of aluminum extrusions and machined components. The vacuum chambers will have 3800 weld joints, each subject to strict vacuum requirements, as well as a variety of related design criteria. The vacuum criteria and chamber design are reviewed, including a discussion of the weld joint geometries. The critical fabrication process parameters for meeting the design requirements are discussed. The experiences of the prototype chamber fabrication program are presented. Finally, the required facilities preparation for construction activity is briefly described. 6 refs., 6 figs., 1 tab.

  9. 30 CFR 77.305 - Access to drying chambers, hot gas inlet chambers and ductwork; installation and maintenance.

    Science.gov (United States)

    2010-07-01

    ... chambers and ductwork; installation and maintenance. 77.305 Section 77.305 Mineral Resources MINE SAFETY... drying chambers, hot gas inlet chambers and ductwork; installation and maintenance. Drying chambers, hot gas inlet chambers and all ductwork in which coal dust may accumulate shall be equipped with...

  10. On-line quality assurance of rotational radiotherapy treatment delivery by means of a 2D ion chamber array and the Octavius phantom.

    Science.gov (United States)

    Van Esch, Ann; Clermont, Christian; Devillers, Magali; Iori, Mauro; Huyskens, Dominique P

    2007-10-01

    For routine pretreatment verification of innovative treatment techniques such as (intensity modulated) dynamic arc therapy and helical TomoTherapy, an on-line and reliable method would be highly desirable. The present solution proposed by TomoTherapy, Inc. (Madison, WI) relies on film dosimetry in combination with up to two simultaneous ion chamber point dose measurements. A new method is proposed using a 2D ion chamber array (Seven29, PTW, Freiburg, Germany) inserted in a dedicated octagonal phantom, called Octavius. The octagonal shape allows easy positioning for measurements in multiple planes. The directional dependence of the response of the detector was primarily investigated on a dual energy (6 and 18 MV) Clinac 21EX (Varian Medical Systems, Palo Alto, CA) as no fixed angle incidences can be calculated in the Hi-Art TPS of TomoTherapy. The array was irradiated from different gantry angles and with different arc deliveries, and the dose distributions at the level of the detector were calculated with the AAA (Analytical Anisotropic Algorithm) photon dose calculation algorithm implemented in Eclipse (Varian). For validation on the 6 MV TomoTherapy unit, rotational treatments were generated, and dose distributions were calculated with the Hi-Art TPS. Multiple cylindrical ion chamber measurements were used to cross-check the dose calculation and dose delivery in Octavius in the absence of the 2D array. To compensate for the directional dependence of the 2D array, additional prototypes of Octavius were manufactured with built-in cylindrically symmetric compensation cavities. When using the Octavius phantom with a 2 cm compensation cavity, measurements with an accuracy comparable to that of single ion chambers can be achieved. The complete Octavius solution for quality assurance of rotational treatments consists of: The 2D array, two octagonal phantoms (with and without compensation layer), an insert for nine cylindrical ion chambers, and a set of inserts of

  11. SU-E-T-448: On the Perturbation Factor P-cav of the Markus Parallel Plate Ion Chambers in Clinical Electron Beams, Monte Carlo Based Reintegration of An Historical Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Voigts-Rhetz, P von; Zink, K [Technische Hochschule Mittelhessen - University of Applied Sciences, Giessen, Hessen (Germany)

    2014-06-01

    Purpose: All present dosimetry protocols recommend well-guarded parallel-plate ion chambers for electron dosimetry. For the guard-less Markus chamber an energy dependent fluence perturbation correction pcav is given. This perturbation correction was experimentally determined by van der Plaetsen by comparison of the read-out of a Markus and a NACP chamber, which was assumed to be “perturbation-free”. Aim of the present study is a Monte Carlo based reiteration of this experiment. Methods: Detailed models of four parallel-plate chambers (Roos, Markus, NACP and Advanced Markus) were designed using the Monte Carlo code EGSnrc and placed in a water phantom. For all chambers the dose to the active volume filled with low density water was calculated for 13 clinical electron spectra (E{sub 0}=6-21 MeV) at the depth of maximum and at the reference depth under reference conditions. In all cases the chamber's reference point was positioned at the depth of measurement. Moreover, the dose to water DW was calculated in a small water voxel positioned at the same depth. Results: The calculated dose ratio D{sub NACP}/D{sub Markus}, which according to van der Plaetsen reflects the fluence perturbation correction of the Markus chamber, deviates less from unity than the values given by van der Plaetsen's but exhibits a similar energy dependence. The same holds for the dose ratios of the other well guarded chambers. But, in comparison to water, the Markus chamber reveals the smallest overall perturbation correction which is nearly energy independent at both investigated depths. Conclusion: The simulations principally confirm the energy dependence of the dose ratio D{sub NACP}/D{sub Markus} as published by van der Plaetsen. But, as shown by our simulations of the ratio D{sub W}/D{sub Markus}, the conclusion drawn in all dosimetry protocols is questionable: in contrast to all well-guarded chambers the guard-less Markus chamber reveals the smallest overall perturbation

  12. Developing cloud chambers with high school students

    CERN Document Server

    Ishizuka, Ryo; Sato, Shoma; Zeze, Syoji

    2013-01-01

    The result and outcome of the cloud chamber project, which aims to develop a cloud chamber useful for science education is reported in detail. A project includes both three high school students and a teacher as a part of Super Science High School (SSH) program in our school. We develop a dry ice free cloud chamber using salt and ice (or snow). Technical detail of the chamber is presented. We also argue how the project affects student's cognition, motivation, academic skills and behavior. The research project had been done in very similar way to those of professional researchers, i.e., planning research, applying fund, writing a paper and giving a talk in conferences. From interviews with students, we learn that such style of scientific activity is very effective in promoting student's motivation for learning science.

  13. RADAR Anechoic Chamber/RCS Measurements Lab

    Data.gov (United States)

    Federal Laboratory Consortium — The RF Anechoic Chamber is 56 feet long by 12 feet high by 13.5 feet wide, with an adjoining electronic computer control room. A double door entrance at one end of...

  14. High Performance Methane Thrust Chamber (HPMTC) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — ORBITEC proposes to develop a High-Performance Methane Thrust Chamber (HPMRE) to meet the demands of advanced chemical propulsion systems for deep-space mission...

  15. Resistive plate chambers for tomography and radiography

    National Research Council Canada - National Science Library

    C. Thomay; P. Baesso; D. Cussans; J. Davies; P. Glaysher; S. Quillin; S. Robertson; C. Steer; C. Vassallo; J. Velthuis

    2012-01-01

    Resistive Plate Chambers (RPCs) are widely used in high energy physics for both tracking and triggering purposes, due to their excellent time resolution, rate capability, and good spatial resolution...

  16. MAN-IN-SIMULANT TEST (MIST) CHAMBER

    Data.gov (United States)

    Federal Laboratory Consortium — The MIST chamber uses methyl salicylate (oil of wintergreen) vapor as a simulant for HD agent to conduct system level evaluations of chemical protective ensembles....

  17. Aeroacoustic sound generation in simple expansion chambers.

    Science.gov (United States)

    English, Emmet J; Holland, Keith R

    2010-11-01

    A method is presented for measuring the aeroacoustic source strength in ducts with flow at frequencies at which the wave motion can be considered substantially one-dimensional. The method is based on coherent power flux measurements using pairs of microphones positioned both upstream and downstream of the source region. The method is applied to a flow excited expansion chamber with aeroacoustic source measurements presented for chambers with a range of flow velocities and chamber lengths. The results indicate locked-on flow tones are generated in the chamber. The frequency of these locked-on flow tones is compared with that predicted using describing function theory applied to resonators with a grazing flow as well as that of other literature.

  18. Developing Cloud Chambers with High School Students

    Science.gov (United States)

    Ishizuka, Ryo; Tan, Nobuaki; Sato, Shoma; Zeze, Syoji

    The result and outcome of the cloud chamber project, which aims to develop a cloud chamber useful for science education is reported in detail. A project includes both three high school students and a teacher as a part of Super Science High School (SSH) program in our school. We develop a dry-ice-free cloud chamber using salt and ice (or snow). Technical details of the chamber are described. We also argue how the project have affected student's cognition, motivation, academic skills and behavior. The research project has taken steps of professional researchers, i.e., in planning research, applying fund, writing a paper and giving a talk in conferences. From interviews with students, we have learnt that such style of scientific activity is very effective in promoting student's motivation for learning science.

  19. Using a ceramic chamber in kicker magnets

    Energy Technology Data Exchange (ETDEWEB)

    Kurennoy, S.

    1993-05-01

    A ceramic chamber inside kicker magnets can provide the relevant field risetime. On the other hand, some metallic coating inside has to prevent static charge buildup and shield the beam from ceramic and ferrite at high frequencies to avoid possible resonances. The issues concerning the metallized ceramic chamber, such as coupling impedances and requirements on the coating, are studied to find a compromise solution for kickers of the Medium Energy Booster at the Superconducting Super Collider.

  20. The Gargamelle heavy liquid bubble chamber

    CERN Multimedia

    1970-01-01

    This image shows the Gargamelle heavy liquid bubble chamber. It was used to detect particles in experiments at the PS between 1970 and 1976 before being moved to the SPS. In 1973, while working on the PS, it detected the first neutral current, an interaction vital to the electroweak theory. In 1978 a large fissure appeared in the body of the chamber and Gargamelle was stopped in 1979.

  1. The world's largest time projection chamber

    CERN Multimedia

    Maximilien Brice

    2006-01-01

    Peter Glassel, the technical coordinator for the ALICE time projection chamber, is seen sitting inside the detector; the largest in the world at nearly 100 cubic metres. Thousands of wires are connected to read out electronic data produced as particles are created in lead-lead collisions at the centre of the detector. These particles will cause the medium within the time projection chamber to ionise along their tracks allowing the particle paths to be recreated.

  2. Electrostatic fields in an ionization chamber electret

    Science.gov (United States)

    Fallone, B. G.; Podgorsak, E. B.

    1983-09-01

    The theory of linear systems is used to derive the potential and electric field in distance space in a cylindrical polarization/depolarization electret chamber. General solutions for the near, intermediate, and far regions are given and their domains of convergence discussed. On the axis of the chamber the solutions for the electret surface are equal to those obtained from Gauss's and Kirchoff's laws, and at large distances from the surface to those obtained from the introduction of a dipole layer model.

  3. Tracking with wire chambers at high luminosities

    Energy Technology Data Exchange (ETDEWEB)

    Hanson, G.G. (Indiana Univ., Bloomington, IN (USA) Stanford Linear Accelerator Center, Menlo Park, CA (USA))

    1989-12-01

    Radiation damage and rate limitations impose severe constraints on wire chambers at the SSC. Possible conceptual designs for wire chamber tracking systems that satisfy these constraints are discussed. Computer simulation studies of tracking in such systems are presented. Simulations of events from interesting physics at the SSC, including hits from minimum bias background events, are examined. Results of some preliminary pattern recognition studies are given. 11 refs., 10 figs.

  4. A model to forecast magma chamber rupture

    Science.gov (United States)

    Browning, John; Drymoni, Kyriaki; Gudmundsson, Agust

    2016-04-01

    An understanding of the amount of magma available to supply any given eruption is useful for determining the potential eruption magnitude and duration. Geodetic measurements and inversion techniques are often used to constrain volume changes within magma chambers, as well as constrain location and depth, but such models are incapable of calculating total magma storage. For example, during the 2012 unrest period at Santorini volcano, approximately 0.021 km3 of new magma entered a shallow chamber residing at around 4 km below the surface. This type of event is not unusual, and is in fact a necessary condition for the formation of a long-lived shallow chamber. The period of unrest ended without culminating in eruption, i.e the amount of magma which entered the chamber was insufficient to break the chamber and force magma further towards the surface. Using continuum-mechanics and fracture-mechanics principles, we present a model to calculate the amount of magma contained at shallow depth beneath active volcanoes. Here we discuss our model in the context of Santorini volcano, Greece. We demonstrate through structural analysis of dykes exposed within the Santorini caldera, previously published data on the volume of recent eruptions, and geodetic measurements of the 2011-2012 unrest period, that the measured 0.02% increase in volume of Santorini's shallow magma chamber was associated with magmatic excess pressure increase of around 1.1 MPa. This excess pressure was high enough to bring the chamber roof close to rupture and dyke injection. For volcanoes with known typical extrusion and intrusion (dyke) volumes, the new methodology presented here makes it possible to forecast the conditions for magma-chamber failure and dyke injection at any geodetically well-monitored volcano.

  5. Detection of particles with a cloud chamber

    OpenAIRE

    Esteban Muñoz, Iván

    2016-01-01

    Cloud chambers were essential devices in early nuclear and particle physics research. Superseded by more modern detectors in actual research, they still remain very interesting pedagogical apparatus. This thesis attempts to give a global view on this topic. To do so, a review of the physical foundations of the diffusion cloud chamber, in which an alcohol is supersaturated by cooling it with a thermal reservoir, is carried out. Its main results are then applied to analyse the working con...

  6. The drift chambers of the NOMAD experiment

    Energy Technology Data Exchange (ETDEWEB)

    Anfreville, M.; Astier, P.; Authier, M.; Baldisseri, A.; Banner, M.; Besson, N.; Bouchez, J.; Castera, A.; Cloue, O.; Dumarchez, J. E-mail: jacques.dumarchez@cern.ch; Dumps, L.; Gangler, E.; Gosset, J.; Hagner, C.; Jollec, C.; Lachaud, C.; Letessier-Selvon, A.; Levy, J.-M.; Linssen, L.; Meyer, J.-P.; Ouriet, J.-P.; Passerieux, J.-P.; Margaley, T.P.T. Pedrol; Placci, A.; Pluquet, A.; Poinsignon, J.; Popov, B.A.; Rathouit, P.; Schahmaneche, K.; Stolarczyk, T.; Uros, V.; Vannucci, F.; Vo, M.K.; Zaccone, H

    2002-04-01

    We present a detailed description of the drift chambers used as an active target and a tracking device in the NOMAD experiment at CERN. The main characteristics of these chambers are a large area (3{center_dot}3 m{sup 2}), a self-supporting structure made of light composite materials and a low cost. A spatial resolution of 150 {mu}m has been achieved with a single hit efficiency of 97%.

  7. In vitro penetration of bleaching agents into the pulp chamber

    DEFF Research Database (Denmark)

    Benetti, Ana Raquel; Valera, M C; Mancini, M N G

    2004-01-01

    To investigate pulp chamber penetration of bleaching agents in teeth following restorative procedures.......To investigate pulp chamber penetration of bleaching agents in teeth following restorative procedures....

  8. The Bland-Altman analysis: Does it have a role in assessing radiation dosimeter performance relative to an established standard?

    Energy Technology Data Exchange (ETDEWEB)

    Hill, R.F., E-mail: robin.hill@email.cs.nsw.gov.a [Institute of Medical Physics, School of Physics, University of Sydney, Sydney NSW 2006 (Australia); Department of Radiation Oncology, Royal Prince Alfred Hospital, Camperdown NSW 2050 (Australia); Tofts, P.S. [Brighton and Sussex Medical School, Brighton BN1 9RR (United Kingdom); Institute of Neurology, University College London, London WC1N 3BG (United Kingdom); Baldock, C. [Institute of Medical Physics, School of Physics, University of Sydney, Sydney NSW 2006 (Australia)

    2010-08-15

    Bland-Altman analysis is used to compare two different methods of measurement and to determine whether a new method of measurement may replace an existing accepted 'gold standard' method. In this work, Bland-Altman analysis has been applied to radiation dosimetry to compare the PTW Markus and Roos parallel plate ionisation chambers and a PTW PinPoint chamber against a Farmer type ionisation chamber which is accepted as the gold standard for radiation dosimetry in the clinic. Depth doses for low energy x-rays beams with energies of 50, 75 and 100 kVp were measured using each of the ionisation chambers. Depth doses were also calculated by interpolation of the data in the British Journal of Radiology (BJR) Report 25. From the Bland-Altman analysis, the mean dose difference between the two parallel plate chambers and the Farmer chambers was 1% over the range of depths measured. The PinPoint chamber gave significant dose differences compared to the Farmer chamber. There were also differences of up to 12% between the BJR Report 25 depth doses and the measured data. For the Bland-Altman plots, the lines representing the limits of agreement were selected to be a particular percentage agreement e.g. 1 or 2%, instead of being based on the standard deviation ({sigma}) of the differences. The Bland-Altman statistical analysis is a powerful tool for making comparisons of ionisation chambers with an ionisation chamber that has been accepted as a 'gold standard'. Therefore we conclude that Bland-Altman analysis does have a role in assessing radiation dosimeter performance relative to an established standard.

  9. Chamber for Growing and Observing Fungi

    Science.gov (United States)

    Pierson, Duane L.; Molina, Thomas C.

    2005-01-01

    A chamber has been designed to enable growth and observation of microcolonies of fungi in isolation from the external environment. Unlike prior fungus-growing apparatuses, this chamber makes it possible to examine a fungus culture without disrupting it. Partly resembling a small picture frame, the chamber includes a metal plate having a rectangular through-thethickness opening with recesses for a top and a bottom cover glass, an inlet for air, and an inlet for water. The bottom cover glass is put in place and held there by clips, then a block of nutrient medium and a moisture pad are placed in the opening. The block is inoculated, then the top cover glass is put in place and held there by clips. Once growth is evident, the chamber can be sealed with tape. Little (if any) water evaporates past the edges of the cover glasses, and, hence there is little (if any) need to add water. A microscope can be used to observe the culture through either cover glass. Because the culture is sealed in the chamber, it is safe to examine the culture without risking contamination. The chamber can be sterilized and reused.

  10. The GODDESS ionization chamber: developing robust windows

    Science.gov (United States)

    Blanchard, Rose; Baugher, Travis; Cizewski, Jolie; Pain, Steven; Ratkiewicz, Andrew; Goddess Collaboration

    2015-10-01

    Reaction studies of nuclei far from stability require high-efficiency arrays of detectors and the ability to identify beam-like particles, especially when the beam is a cocktail beam. The Gammasphere ORRUBA Dual Detectors for Experimental Structure Studies (GODDESS) is made up of the Oak Ridge-Rutgers University Barrel Array (ORRUBA) of silicon detectors for charged particles inside of the gamma-ray detector array Gammasphere. A high-rate ionization chamber is being developed to identify beam-like particles. Consisting of twenty-one alternating anode and cathode grids, the ionization chamber sits downstream of the target chamber and is used to measure the energy loss of recoiling ions. A critical component of the system is a thin and robust mylar window which serves to separate the gas-filled ionization chamber from the vacuum of the target chamber with minimal energy loss. After construction, windows were tested to assure that they would not break below the required pressure, causing harm to the wire grids. This presentation will summarize the status of the ionization chamber and the results of the first tests with beams. This work is supported in part by the U.S. Department of Energy and National Science Foundation.

  11. Expandable Purge Chambers Would Protect Cryogenic Fittings

    Science.gov (United States)

    Townsend, Ivan I., III

    2004-01-01

    Expandable ice-prevention and cleanliness-preservation (EIP-CP) chambers have been proposed to prevent the accumulation of ice or airborne particles on quick-disconnect (QD) fittings, or on ducts or tubes that contain cryogenic fluids. In the original application for which the EIP-CP chambers were conceived, there is a requirement to be able to disconnect and reconnect the QD fittings in rapid succession. If ice were to form on the fittings by condensation and freezing of airborne water vapor on the cold fitting surfaces, the ice could interfere with proper mating of the fittings, making it necessary to wait an unacceptably long time for the ice to thaw before attempting reconnection. By keeping water vapor away from the cold fitting surfaces, the EIP-CP chambers would prevent accumulation of ice, preserving the ability to reconnect as soon as required. Basically, the role of an EIP-CP chamber would be to serve as an enclosure for a flow of dry nitrogen gas that would keep ambient air away from QD cryogenic fittings. An EIP-CP chamber would be an inflatable device made of a fabriclike material. The chamber would be attached to an umbilical plate holding a cryogenic QD fitting.

  12. Laser peripheral iridotomy changes anterior chamber architecture.

    Science.gov (United States)

    Theinert, Christian; Wiedemann, Peter; Unterlauft, Jan D

    2017-01-19

    The pressure gradient between anterior and posterior chamber in acute angle closure (AAC) and primary angle closure suspects is balanced by a sufficient laser peripheral iridotomy (LPI). The anterior chamber changes induced by LPI in patients with unilateral AAC were examined and compared to healthy eyes to define threshold values, which may help to discriminate between healthy and diseased eyes. Using Scheimpflug photography, anterior chamber depth (ACD), anterior chamber volume (ACV), anterior chamber angle (ACA), and central corneal thickness (CCT) were measured before and after LPI in both eyes of unilateral AAC cases. These measurements were compared to a group of healthy control eyes to determine threshold values for ACD, ACV, and ACA. The ACD, ACV, and ACA increased significantly in the 25 AAC eyes after LPI. The ACD, ACV, ACA, and CCT values in the AAC eyes obtained before LPI were compared to a control group of 59 healthy eyes with wide open chamber angles. The cutoff values revealed by receiver operating characteristic analysis were 2.1 mm for ACD, 90.5 mm2 for ACV, and 27.25° for ACA. Our results confirm the significant changes of the anterior segments architecture induced by LPI in AAC eyes. The found threshold values for ACD, ACV, and ACA may help in daily clinical routine to discriminate between healthy eyes and those in need for a prophylactic LPI.

  13. Temperature Studies for ATLAS MDT BOS Chambers

    CERN Document Server

    Engl, A; Hertenberger, R; Mameghani, R; Merkl, D; Rauscher, F; Schaile, A D; Ströhmer, R

    2009-01-01

    Data sets with high statistics taken at the cosmic ray facility, equipped with 3 ATLAS BOS MDT chambers, in Garching (Munich) have been used to study temperature and pressure effects on gas gain and drifttime. The deformation of a thermally expanded chamber was reconstructed using the internal RasNik alignment monitoring system and the tracks from cosmic data. For these studies a heating system was designed to increase the temperature of the middle chamber by up to 20 Kelvins over room temperature. For comparison the temperature effects on gas properties have been simulated with Garfield. The maximum drifttime decreased under temperature raise by -2.21 +- 0.08 ns/K, in agreement with the results of pressure variations and the Garfield simulation. The increased temperatures led to a linear increase of the gas gain of about 2.1% 1/K. The chamber deformation has been analyzed with the help of reconstructed tracks. By the comparison of the tracks through the reference chambers with these through the test chamber ...

  14. Percepción local de los servicios ecológicos y de bienestar de la selva de la zona maya en Quintana Roo, México

    Directory of Open Access Journals (Sweden)

    Karla Diana Infante Ramírez

    2015-01-01

    Full Text Available Resumen. Este estudio evalúa la percepción local sobre los servicios ecológicos y de bienestar de la selva en comunidades de la zona maya del centro de Quintana Roo. Se trabajó con seis unidades de paisaje, las cuales fueron delimitadas con la participación de habitantes de las comunidades y con una revisión de literatura. Para identificar los servicios que perciben las comunidades de la selva, se utilizaron entrevistas abiertas y semiestructuradas, observación participante, entrevistas a profundidad y talleres comunitarios. Los resultados muestran que los entrevistados identificaron servicios de provisión, de regulación y mantenimiento y culturales. En particular, percibieron más servicios ecológicos en las unidades del “monte alto” y el “acahual de 20 años o más”, mientras que la “sabana” fue identificada como la que menos servicios les proporciona. Además, a partir de la teoría de los estudios de desarrollo, el estudio identifica las tres dimensiones del concepto de “bienestar humano”: la material, la relacional y la subjetiva, y logra presentar la relación de éstas con los servicios ecológicos percibidos por las comunidades estudiadas. Los resultados muestran una clara interacción sociedad maya-naturaleza y son útiles para orientar la toma de decisiones en el manejo de los recursos naturales, tanto a nivel comunitario como gubernamental.

  15. Caracterización de la demanda turística utilizando técnicas multivariables: Caso de estudio Calderitas, Quintana Roo, México

    Directory of Open Access Journals (Sweden)

    Francisco Javier Güemez Ricalde

    2011-11-01

    Full Text Available El sur del Estado de Quintana Roo, entre sus características, cuenta con un tipo de turismo gastronómico potencialmente asociado al ecológico. Allí, la región turística de Calderitas, ubicada a ocho kilómetros de la ciudad de Chetumal, por su cercanía, atrae gran parte de la demanda gastronómica, que incluye la construcción de locales y la aparición de visitantes que se trasladan a los casinos y las zonas de libre comercio en la frontera con Belice. Sin embargo, los turistas se concentran casi exclusivamente en los alimentos, pues recurren poco o nada a otra clase de servicios turísticos que se ofrecen. Por tal motivo, fue necesario identificar el perfil de los visitantes y sus motivaciones, para así orientar la promoción. La investigación que se realizó fue descriptiva, con diseño transversal de campo, e incluye una única medición (agosto de 2009, que se llevó a cabo a través de la aplicación de un cuestionario. La muestra es aleatoria y no probabilística. Se desarrolló con 222 turistas. El trabajo, además, consideró variables de control: edad, sexo, etc.; y, variables explicativas de factores determinantes de la demanda. Finalmente se analizaron segmentación, motivaciones y posicionamiento.

  16. Caracterización de la demanda turística utilizando técnicas multivariables: Caso de estudio Calderitas, Quintana Roo, México

    Directory of Open Access Journals (Sweden)

    Francisco Javier Güemez Ricalde

    2011-11-01

    Full Text Available El sur del Estado de Quintana Roo, entre sus características, cuenta con un tipo de turismo gastronómico potencialmente asociado al ecológico. Allí, la región turística de Calderitas, ubicada a ocho kilómetros de la ciudad de Chetumal, por su cercanía, atrae gran parte de la demanda gastronómica, que incluye la construcción de locales y la aparición de visitantes que se trasladan a los casinos y las zonas de libre comercio en la frontera con Belice. Sin embargo, los turistas se concentran casi exclusivamente en los alimentos, pues recurren poco o nada a otra clase de servicios turísticos que se ofrecen. Por tal motivo, fue necesario identificar el perfil de los visitantes y sus motivaciones, para así orientar la promoción. La investigación que se realizó fue descriptiva, con diseño transversal de campo, e incluye una única medición (agosto de 2009, que se llevó a cabo a través de la aplicación de un cuestionario. La muestra es aleatoria y no probabilística. Se desarrolló con 222 turistas. El trabajo, además, consideró variables de control: edad, sexo, etc.; y, variables explicativas de factores determinantes de la demanda. Finalmente se analizaron segmentación, motivaciones y posicionamiento.

  17. Percepción local de los servicios ecológicos y de bienestar de la selva de la zona maya en Quintana Roo, México

    Directory of Open Access Journals (Sweden)

    Karla Diana Infante Ramírez

    2014-01-01

    Full Text Available Este estudio evalúa la percepción local sobre los servicios ecológicos y de bienestar de la selva en comunidades de la zona maya del centro de Quintana Roo. Se trabajó con seis unidades de paisaje, las cuales fueron delimitadas con la participación de habitantes de las comunidades y con una revisión de literatura. Para identificar los servicios que perciben las comunidades de la selva, se utilizaron entrevistas abiertas y semiestructuradas, observación participante, entrevistas a profundidad y talleres comunitarios. Los resultados muestran que los entrevistados identificaron servicios de provisión, de regulación y mantenimiento, y culturales. En particular, percibieron más servicios ecológicos en las unidades del “monte alto” y el “acahual de 20 años” o más, mientras que la “sabana” fue identificada como la que menos servicios les proporciona. Además, a partir de la teoría de los estudios de desarrollo, el estudio identifica las tres dimensiones del concepto de “bienestar humano”: la material, la relacional y la subjetiva, y logra presentar la relación de éstas con los servicios ecológicos percibidos por las comunidades estudiadas. Los resultados muestran una clara interacción sociedad maya-naturaleza y son útiles para orientar la toma de decisiones en el manejo de los recursos naturales, tanto a nivel comunitario como gubernamental.

  18. How well do you know your growth chambers? Testing for chamber effect using plant traits

    National Research Council Canada - National Science Library

    Porter, Amanda S; Evans-Fitz Gerald, Christiana; McElwain, Jennifer C; Yiotis, Charilaos; Elliott-Kingston, Caroline

    2015-01-01

    .... A range of techniques were used to measure differences between chamber plants, including chlorophyll fluorescence measurements, gas exchange analysis, biomass, reproductive yield, anatomical traits...

  19. 二维电离室矩阵在放疗的质量保证体系中的应用%Application of 2D Ion Chamber Array in Quality Assurance of Radiation Therapy

    Institute of Scientific and Technical Information of China (English)

    窦一平; Xin Zhang; Eun Young Han; Yulong Yan

    2015-01-01

    The Quality Assurance(QA)in the treatment of malignant diseases is highly required in the processes of peri?odical machine performance evaluation and patient-specific dose distribution verification for the safe and accurate radia?tion therapy. This study aims to evaluate the performance of the PTW ion chamber array Seven29 in routine QA proce?dures. The method for the study is to use Seven29 with the dedicated Octavius phantom and slab phantom in the dose distribution measurement for the verification of the dose map computation on the treatment planning systems. PTW soft?ware VeriSoft and MultiCheck are used for the analysis. Beam profile consistency check,one of the most important items for LINAC monthly QA,can be directly evaluated between two consecutive months. Ion chamber array has proven to be an accurate,reliable and efficient physics gadget for various dosimetry verification procedures. It is one of the essential components of a paperless and filmless radiation therapy facility.%肿瘤的放射治疗中,为了检测治疗设备的性能以及确保放疗计划实施的可靠性和准确性,必须具备完善的质量保证体系(Quality Assurance,QA).本文研究将德国PTW公司研发的二维电离室矩阵Seven29应用到放疗的日常QA过程中,使用Seven29和与之配套的八角体模或平板体模来测量剂量分布图,并与治疗计划系统计算出来的剂量分布图进行比较.对治疗设备每月的QA,最重要的项目是检测射线性能的连续性,检测方法是对连续两个月机器性能的参数进行比较.采用PTW公司的软件VeriSoft和MultiCheck进行数据分析,经大量的实验验证和比较,结果表明二维电离室矩阵是剂量测量和分析的有效工具,其精度高、可靠性强、使用方便,是实现无胶片化和无纸化放疗体系的重要组成部分.

  20. Final report for NIF chamber dynamics studies

    Energy Technology Data Exchange (ETDEWEB)

    Burnham, A; Peterson, P F; Scott, J M

    1998-09-01

    The National Ignition Facility (NIF), a 1.8 MJ, 192 laser beam facility, will have anticipated fusion yields of up to 20 MJ from D-T pellets encased in a gold hohlraum target. The energy emitted from the target in the form of x rays, neutrons, target debris kinetic energy, and target shrapnel will be contained in a 5 m. radius spherical target chamber. various diagnostics will be stationed around the target at varying distances from the target. During each shot, the target will emit x rays that will vaporize nearby target facing surfaces including those of the diagnostics, the target positioner, and other chamber structures. This ablated vapor will be transported throughout the chamber, and will eventually condense and deposit on surfaces in the chamber, including the final optics debris shields. The research at the University of California at Berkeley relates primarily to the NIF chamber dynamics. The key design issues are the ablation of the chamber structures, transport of the vapor through the chamber and the condensation or deposition processes of those vaporized materials. An understanding of these processes is essential in developing a concept for protecting the fina optics debris shields from an excessive coating (> 10 A) of target debris and ablated material, thereby prolonging their lifetime between change-outs. At Berkeley, we have studied the physical issues of the ablation process and the effects of varying materials, the condensation process of the vaporized material, and design schemes that can lower the threat posed to the debris shields by these processes. The work or portions of the work completed this year have been published in several papers and a dissertation [l-5].

  1. Investigation of Swirling Flows in Mixing Chambers

    Directory of Open Access Journals (Sweden)

    Jyh Jian Chen

    2011-01-01

    Full Text Available This investigation analyzed the three-dimensional momentum and mass transfer characteristics arising from multiple inlets and a single outlet in micromixing chamber. The chamber consists of a right square prism, an octagonal prism, or a cylinder. Numerical results which were presented in terms of velocity vector plots and concentration distributions indicated that the swirling flows inside the chamber dominate the mixing index. Particle trajectories were utilized to demonstrate the rotational and extensional local flows which produce steady stirring, and the configuration of colored particles at the outlet section expressed at different Re represented the mixing performance qualitatively. The combination of the Taylor dispersion and the vorticity was first introduced and made the mixing successful. The effects of various geometric parameters and Reynolds numbers on the mixing characteristics were investigated. An optimal design of the cylindrical chamber with 4 inlets can be found. At larger Reynolds number, Re>15, more inertia caused the powerful swirling flows in the chamber, and more damping effect on diffusion was diminished, which then increased the mixing performance.

  2. Improved climatic chamber for desiccation simulation

    Directory of Open Access Journals (Sweden)

    Lozada Catalina

    2016-01-01

    Full Text Available The climatic chamber at the Universidad de Los Andes was improved for modeling desiccation in soil layers. This chamber allows the measurement of different environmental variables. In this research, evaporation tests were conducted in water imposing boundary conditions for drying, and then these tests were performed in a soil layer. The soil was prepared from a slurry state and was drying controlling the temperature, the infrared radiation, the wind velocity, and the relative humidity. In the first part of this paper, a description of the climatic chamber, operation ranges and theoretical work principles of the climatic chamber are presented. Then, the second part shows the results for desiccation in water and soil. The desiccation tests performed with the climatic chamber allow simulating all environmental conditions accurately during drying coupling the effect of all environmental variables. As a result, the evaporation rate increases with infrared radiation in soil and water. The rate at the beginning of the desiccation tests in clays is the same as in water. However, this evaporation rate decreases as the soil becomes desiccated.

  3. Tuned Chamber Core Panel Acoustic Test Results

    Science.gov (United States)

    Schiller, Noah H.; Allen, Albert R.

    2016-01-01

    This report documents acoustic testing of tuned chamber core panels, which can be used to supplement the low-frequency performance of conventional acoustic treatment. The tuned chamber core concept incorporates low-frequency noise control directly within the primary structure and is applicable to sandwich constructions with a directional core, including corrugated-, truss-, and fluted-core designs. These types of sandwich structures have long, hollow channels (or chambers) in the core. By adding small holes through one of the facesheets, the hollow chambers can be utilized as an array of low-frequency acoustic resonators. These resonators can then be used to attenuate low-frequency noise (below 400 Hz) inside a vehicle compartment without increasing the weight or size of the structure. The results of this test program demonstrate that the tuned chamber core concept is effective when used in isolation or combined with acoustic foam treatments. Specifically, an array of acoustic resonators integrated within the core of the panels was shown to improve both the low-frequency absorption and transmission loss of the structure in targeted one-third octave bands.

  4. High intensity electromagnetic field gerenation using a transportable reverberation chamber

    NARCIS (Netherlands)

    Leferink, Frank

    2008-01-01

    A reverberation chamber can create very high field strength with moderate input power. Existing chambers are making use of a paddle wheel to change the resonant modes in the chamber. A transportable reverberation chamber with vibrating walls will be presented. Inside this Vibrating Intrinsic Reverbe

  5. Análisis del comportamiento estadístico y aproximación fractal en la recaudación del impuesto sobre nóminas y asimilados en el estado de Quintana Roo

    OpenAIRE

    Puls, Sergio Lagunas; Trejo, José Juan Rodríguez; Gutiérrez, Genaro Aguilar

    2014-01-01

    ste trabajo analiza la recaudación del impuesto sobre nóminasy asimilados en el estado de Quintana Roo de 2000 a 2010.La aportación principal es identificar el comportamiento es-tadístico recaudatorio mediante la aproximación fractal, esta-bleciendo patrones iterativos en el nivel estatal, municipal, porla totalidad de la serie analizada de 132 meses y en periodosmenores, sirviendo como detonante para aplicarse en otras lo-calidades y gravámenes con el fin de profundizar en algunascaracteríst...

  6. La transformación de los espacios de vida y la configuración del paisaje turístico en Puerto Morelos, Quintana Roo, México

    OpenAIRE

    Erika Cruz-Coria

    2013-01-01

    La presente investigación aborda el estudio de las transformaciones producidas en el paisaje del poblado de Puerto Morelos, Quintana Roo, por la incorporación de la actividad turística en la vida cotidiana de sus pobladores. A medida que los objetos, usos y el lenguaje del turismo se incorporan a las costumbres, tradiciones, relaciones sociales y estilos de vida de la población; los espacios de vida -laboral, vecinal, doméstico y de ocio- adquieren características físicas poco tradicionales y...

  7. Posing the first LEAR vacuum chamber

    CERN Multimedia

    1982-01-01

    The photo shows one of the four bending magnets of LEAR. They were of C-type with the opening ('mouth') to the outside of the ring (yoke to the inside). Last preparations are made before the vacuum chamber is slid through the mouth into the magnet. Stochastic cooling pickups/kickers were installed inside the chamber. One can distinguish a large number of feed-throughs on the chamber (leading to the pickup/kicker gaps). The free space in the middle of the block was left to offer room for an internal target in the magnet. This possibility was never exploited. Instead it is used here, to accommodate a pumping port for the high vacuum system. Michel Chanel (left) and Pierre Lefevre admire the mechanics at work.

  8. Rapid-Cycling Bubble-Chamber, details

    CERN Multimedia

    CERN PhotoLab

    1980-01-01

    Parts of the hydraulic expansion system of the Rapid-Cycling Bubble-Chamber (RCBC). RCBC was the largest of 3 rapid-cycling bubble-chambers (the others were LEBC and HOLEBC), used as target- and vertex-detectors within the European Hybrid Spectrometer (EHS) in the SPS North Area (EHN1). RCBC contained 250 l of liquid hydrogen and was located inside a 3 T superconducting magnet. It was designed for 30 expansions/s (100 times faster than BEBC), the system shown here allowed 50 expansions/s. RCBC operated from 1981 to 1983 for experiments NA21, NA22 and NA23 at a rate of 15 expansions/s, clocking up a total of over 4 million. In the rear, at left, is bearded Lucien Veillet; Augustin Didona is at the right. See also 8001009. The installation of the piston assembly in the RCBC chamber body is shown in the Annual Report 1980, p.65.

  9. Classification of the LHC BLM Ionization Chamber

    CERN Document Server

    Stockner, M; Fabjan, Christian Wolfgang; Holzer, E B; Kramer, Daniel

    2008-01-01

    The LHC beam loss monitoring (BLM) system must prevent the super conducting magnets from quenching and protect the machine components from damage. The main monitor type is an ionization chamber. About 4000 of them will be installed around the ring. The lost beam particles initiate hadronic showers through the magnets and other machine components. These shower particles are measured by the monitors installed on the outside of the accelerator equipment. For the calibration of the BLM system the signal response of the ionization chamber is simulated in GEANT4 for all relevant particle types and energies (keV to TeV range). For validation, the simulations are compared to measurements using protons, neutrons, photons and mixed radiation fields at various energies and intensities. This paper will focus on the signal response of the ionization chamber to various particle types and energies including space charge effects at high ionization densities.

  10. Thermal vacuum chamber repressurization with instrument purging

    Science.gov (United States)

    Woronowicz, Michael S.

    2016-09-01

    At the conclusion of cryogenic vacuum testing of the James Webb Space Telescope Optical Telescope Element Integrated Science Instrument Module (JWST-OTIS) in NASA Johnson Space Center's (JSCs) thermal vacuum (TV) Chamber A, contamination control (CC) engineers are postulating that chamber particulate material stirred up by the repressurization process may be kept from falling into the Integrated Science Instrument Module (ISIM) interior to some degree by activating instrument purge flows over some initial period before opening the chamber valves. This manuscript describes development of a series of models designed to describe this process. The models are strung together in tandem with a fictitious set of conditions to estimate overpressure evolution from which net outflow velocity behavior may be obtained. Creeping flow assumptions are then used to determine the maximum particle size that may be kept suspended above the ISIM aperture, keeping smaller particles from settling within the instrument module.

  11. Thermal Vacuum Chamber Repressurization with Instrument Purging

    Science.gov (United States)

    Woronowicz, Michael

    2017-01-01

    At the end of James Webb Space Telescope (JWST) OTIS (Optical Telescope Element-OTE-Integrated Science Instrument Module-ISIM) cryogenic vacuum testing in NASA Johnson Space Centers (JSCs) thermal vacuum (TV) Chamber A, contamination control (CC) engineers are mooting the idea that chamber particulate material stirred up by the repressurization process may be kept from falling into the ISIM interior to some degree by activating instrument purge flows over some initial period before opening the chamber valves. This memo describes development of a series of models designed to describe this process. These are strung together in tandem to estimate overpressure evolution from which net outflow velocity behavior may be obtained. Creeping flow assumptions are then used to determine the maximum particle size that may be kept suspended above the ISIM aperture, keeping smaller particles from settling within the instrument module.

  12. Synchronization of the CMS Cathode Strip Chambers

    CERN Document Server

    Raknessa, G; Wang, D

    2007-01-01

    The synchronization of the trigger and data acquisition systems for the Cathode Strip Chambers (CSCs) in the Compact Muon Solenoid (CMS) detector at CERN is described. The CSC trigger system is designed to trigger CMS on muons with high efficiency (~99% per chamber) and is able to accurately identify its 25ns proton bunch crossing. To date, asynchronous cosmic ray data have been used to define the protocol and to refine timing algorithms, allowing synchronization to be realized within and between chambers to within ±10 ns. Final synchronization of the CSCs requires timing parameters to be accurate to 2 ns. This goal will be readily achieved from the cosmic ray baseline using data taken with the synchronous beam structure of the Large Hadron Collider.

  13. Calibration of a pencil ionization chamber with and without preamplifier

    OpenAIRE

    Maia, Ana Figueiredo

    2004-01-01

    The pencil ionization chamber is a cylindrical dosimeter developed for computed tomography beams. Many kinds of ionization chambers have a preamplifier connected to the chamber to make it electrically more stable, specially for field instruments. In this study, the performance of a Victoreen pencil ionization chamber with the original preamplifier and after its removal was compared. The objective of the preamplifier removal was to enable connecting the chamber to other kinds of electromete...

  14. Ultra-low mass drift chambers

    Energy Technology Data Exchange (ETDEWEB)

    Assiro, R. [Istituto Nazionale di Fisica Nucleare, Lecce (Italy); Cappelli, L. [Università di Cassino e del Lazio Meridionale (Italy); Cascella, M. [Istituto Nazionale di Fisica Nucleare, Lecce (Italy); Dipartimento Matematica e Fisica, Università del Salento (Italy); De Lorenzis, L. [Istituto Nazionale di Fisica Nucleare, Lecce (Italy); Dipartimento di Ingegneria dell' Innovazione, Università del Salento (Italy); Grancagnolo, F. [Istituto Nazionale di Fisica Nucleare, Lecce (Italy); Ignatov, F. [Budker Institute of Nuclear Physics, Novosibirsk (Russian Federation); L' Erario, A.; Maffezzoli, A. [Istituto Nazionale di Fisica Nucleare, Lecce (Italy); Dipartimento di Ingegneria dell' Innovazione, Università del Salento (Italy); Miccoli, A. [Istituto Nazionale di Fisica Nucleare, Lecce (Italy); Onorato, G. [Istituto Nazionale di Fisica Nucleare, Lecce (Italy); Budker Institute of Nuclear Physics, Novosibirsk (Russian Federation); Università G. Marconi, Roma (Italy); Perillo, M. [EnginSoft S.p.a., Trento (Italy); Piacentino, G. [Istituto Nazionale di Fisica Nucleare, Lecce (Italy); Fermilab, Batavia, IL (United States); Università G. Marconi, Roma (Italy); Rella, S. [Istituto Nazionale di Fisica Nucleare, Lecce (Italy); Dipartimento di Ingegneria dell' Innovazione, Università del Salento (Italy); Rossetti, F. [EnginSoft S.p.a., Trento (Italy); Spedicato, M. [Istituto Nazionale di Fisica Nucleare, Lecce (Italy); Tassielli, G., E-mail: giovanni.tassielli@le.infn.it [Istituto Nazionale di Fisica Nucleare, Lecce (Italy); Budker Institute of Nuclear Physics, Novosibirsk (Russian Federation); Università G. Marconi, Roma (Italy); and others

    2013-08-01

    We present a novel low mass drift chamber concept, developed in order to fulfill the stringent requirements imposed by the experiments for extremely rare processes, which require high resolutions (order of 100–200 keV/c) for particle momenta in a range (50–100 MeV/c) totally dominated by the multiple scattering contribution. We describe a geometry optimization procedure and a new wiring strategy with a feed-through-less wire anchoring system developed and tested on a drift chamber prototype under completion at INFN-Lecce.

  15. A view inside the Gargamelle bubble chamber

    CERN Multimedia

    1970-01-01

    Gargamelle was the name given to a big bubble chamber built at the Saclay Laboratory in France during the late 1960s. It was designed principally for the detection at CERN of the elusive particles called neutrinos. A bubble chamber contains a liquid under pressure, which reveals the tracks of electrically charged particles as trails of tiny bubbles when the pressure is reduced. Neutrinos have no charge, and so leave no tracks, but the aim with Gargamelle was "see neutrinos" by making visible any charged particles set in motion by the interaction of neutrinos in the liquid

  16. Cosmic Muon Detector Using Proportional Chambers

    CERN Document Server

    Varga, Dezső; Hamar, Gergő; Molnár, Janka Sára; Oláh, Éva; Pázmándi, Péter

    2015-01-01

    A set of classical multi-wire proportional chambers were designed and constructed with the main purpose of efficient cosmic muon detection. These detectors are relatively simple to construct, and at the same time are low cost, making them ideal for educational purposes. The detector layers have efficiencies above 99% for minimum ionizing cosmic muons, and their position resolution is about 1 cm, that is, particle trajectories are clearly observable. Visualization of straight tracks is possible using an LED array, with the discriminated and latched signal driving the display. Due to the exceptional operating stability of the chambers, the design can also be used for cosmic muon telescopes.

  17. Índice de masa corporal y percepción de mujeres mayas obesas de Quintana Roo, México

    Directory of Open Access Journals (Sweden)

    Odette Pérez Izquierdo

    2016-01-01

    Full Text Available Antecedentes: La preocupación por el cuerpo y las prácticas alimentarias de riesgo son dos temas que últimamente han cobrado interés entre las/os nutricionistas, pues además de observar estas características en mujeres de población urbana de diversas edades, estudios realizados en zonas rurales, con población mestiza e indígena de México, evidencian que el problema ya se presenta en mujeres pobres y marginadas. Objetivo: conocer la percepción corporal de mujeres que viven en zonas mayas de México. Métodos: El estudio tuvo dos fases: una cuantitativa, a través de la aplicación de un cuestionario y otra cualitativa que consistió en la realización de grupos focales. Se pesó y midió a mujeres en la comunidad maya de Chun-Yah en el estado de Quintana Roo y se les solicitó que eligieran una figura anatómica con la que se identificaran según su percepción. Resultados: Se obtuvo su índice de masa corporal, su percepción y su deseo por tener un determinado cuerpo. Se encuestó a 51 mujeres mayas en la primera fase quienes tuvieron un promedio de peso de 65 Kg, de estatura de 1.42 m y un IMC de 31.5 kg/m², y más de la mitad se percibieron delgadas. Durante la realización de los grupos focales se detectó una ambivalencia entre su percepción y deseo pues en la comunidad la gordura no es tan estigmatizada. Conclusiones: se discute la necesidad de realizar más estudios empíricos en poblaciones rurales y discutir categorías de análisis diferentes a las biomédicas, como medicalización, lipofobia y discurso médico.

  18. A Regional-Scale Groundwater Model Supporting Management of the Sian Ka'an Biosphere Reserve and its Catchment, Quintana Roo, Mexico

    Science.gov (United States)

    Neuman, B. R.; Merediz Alonso, G.; Rebolledo Vieyra, M.; Marin, L.; Supper, R.; Bauer-Gottwein, P.

    2007-05-01

    The Caribbean Coast of the Yucatan Peninsula is a rapidly developing area featuring a booming tourism industry. The number of hotel rooms in the Riviera Maya has increased from 2600 in 1996 to 26,000 in 2005, while the total population in the Mexican federal state of Quintana Roo has grown from 500,000 in 1990 to 1,115,000 in 2005. This explosive growth threatens the region's water resources, which primarily consist of a less than 50m thick freshwater lens residing in the regional karst aquifer underlying the entire Yucatan Peninsula. The Sian Ka'an Biosphere Reserve, a 6400 km2 combined marine/terrestrial nature protection area is situated south of Tulum (approx. 87.3° - 88° W, 19° - 20° N). The site is listed as a UNESCO world heritage site and is protected under the Ramsar Convention. It includes extensive freshwater wetlands, saline/brackish mangrove swamps, tropical rainforests and parts of the world's second largest coral reef. The freshwater supply to the system occurs primarily via subsurface inflow. Large freshwater springs emerge through vertical sinkholes (cenotes) in the lagoons of Sian Ka'an. Management of this unique ecosystem in view of the rapid development and urbanization of the surrounding areas requires detailed knowledge on the groundwater flow paths in and around the reserve. Moreover, mapping and delineation of its groundwater catchment zone and groundwater traveling time zones is essential. To this end, a regional-scale steady-state groundwater flow model of the Sian Ka'an Biosphere reserve and its catchment was developed. The model is implemented in MIKE SHE with a finite-difference cell size of 1 km2 and is driven with temporally averaged climate forcings. The karst aquifer is treated as an equivalent porous medium. Darcy's law is assumed to be valid over regional scales and the main structural elements of the karst aquifer are included in the model as zones of varying hydraulic conductivity. High conductivity zones in the Sian Ka

  19. Effect of diffuse roof cover with anti-reflection coating for roses; Effect van diffuus kasdek met Anti Reflectie coating bij Roos

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Victoria, N.; Kempkes, F.

    2012-10-15

    The rose Red Naomi was cultivated in two greenhouses at Wageningen UR Greenhouse Horticulture in Bleiswijk, Netherlands (August 2010 - September 2011). One greenhouse covered with normal float glass; the other with AR coated diffuse glass (70% haze). This Anti-Reflection coating on both glass sides compensated for the loss in light transmission caused by the diffusing structure in the glass. The diffuse AR glass lead to a 5.2% higher production (>6.1% fresh weight). Sunscreens were necessary in spring and summer to avoid high light levels on the flower buds, as they cause very high bud temperatures leading to quality problems (blue petal edges and burnt leaf tips). The diffuse greenhouse cover allowed a 100 W/m{sup 2} higher screening threshold than the reference glass. This caused a 2.7% higher daily light integral, able to explain part of the extra production obtained. Part of the extra production achieved can not be explained by the measured factors as no differences were found in the amount of light intercepted by the crop or in leaf photosynthesis under both cover types. The light under the diffuse AR cover was nevertheless much smoother, so the crop seemed to suffer less (lower bud temperatures and less burned leaf tips), and this should provide an explanation for the rest of the extra production. The cover properties did not influence disease development (powdery mildew). The obtained extra production makes the tempered, diffuse glass with Anti Reflection coating on both sides economically feasible [Dutch] Tussen augustus 2010 en september 2011 is bij Wageningen UR Glastuinbouw het effect van diffuus glas, met dubbelzijdige AR coating, op de productie en energiegebruik van roos 'Red Naomi' onderzocht. Onder het diffuse glas werden 5,2% meer bloemtakken geproduceerd, deze rozen waren ook iets langer en zwaarder (6,1% meer versgewicht). Dit verschil kan deels verklaard worden doordat er onder het diffuse glas pas bij hogere stralingsniveau

  20. Comparative Field Evaluation of Different Traps for Collecting Adult Phlebotomine Sand Flies (Diptera: Psychodidae) in an Endemic Area of Cutaneous Leishmaniasis in Quintana Roo, Mexico.

    Science.gov (United States)

    Rodríguez-Rojas, Jorge J; Arque-Chunga, Wilfredo; Fernández-Salas, Ildefonso; Rebollar-Téllez, Eduardo A

    2016-06-01

    Phlebotominae are the vectors of Leishmania parasites. It is important to have available surveillance and collection methods for the sand fly vectors. The objectives of the present study were to evaluate and compare traps for the collection of sand fly species and to analyze trap catches along months and transects. Field evaluations over a year were conducted in an endemic area of leishmaniasis in the state of Quintana Roo, Mexico. A randomized-block design was implemented in study area with tropical rainforest vegetation. The study design utilized 4 transects with 11 trap types: 1) Centers for Disease Control and Prevention (CDC) light trap with incandescent bulb (CDC-I), 2) CDC light trap with blue light-emitting diodes (LEDs) (CDC-B), 3) CDC light trap with white LEDs (CDC-W), 4) CDC light trap with red LEDs (CDC-R), 5) CDC light trap with green LEDs (CDC-G), 6) Disney trap, 7) Disney trap with white LEDs, 8) sticky panels, 9) sticky panels with white LEDs, 10) delta-like trap, and 11) delta-like trap with white LEDs. A total of 1,014 specimens of 13 species and 2 genera (Lutzomyia and Brumptomyia) were collected. There were significant differences in the mean number of sand flies caught with the 11 traps; CDC-I was (P  =  0.0000) more effective than the other traps. Other traps exhibited the following results: CDC-W (17.46%), CDC-B (15.68%), CDC-G (14.89%), and CDC-R (14.30%). The relative abundance of different species varied according to trap types used, and the CDC-I trap attracted more specimens of the known vectors of Leishmania spp., such as like Lutzomyia cruciata, Lu. shannoni, and Lu. ovallesi. Disney trap captured more specimens of Lu. olmeca olmeca. Based on abundance and number of species, CDC light traps and Disney traps appeared to be good candidates for use in vector surveillance programs in this endemic area of Mexico.

  1. Índice de masa corporal y percepción de mujeres mayas obesas de Quintana Roo, México

    Directory of Open Access Journals (Sweden)

    Odette Pérez Izquierdo

    2016-07-01

    Full Text Available Antecedentes: La preocupación por el cuerpo y las prácticas alimentarias de riesgo son dos temas que últimamente han cobrado interés entre las/os nutricionistas, pues además de observar estas características en mujeres de población urbana de diversas edades, estudios realizados en zonas rurales, con población mestiza e indígena de México, evidencian que el problema ya se presenta en mujeres pobres y marginadas. Objetivo: conocer la percepción corporal de mujeres que viven en zonas mayas de México. Métodos: El estudio tuvo dos fases: una cuantitativa, a través de la aplicación de un cuestionario y otra cualitativa que consistió en la realización de grupos focales. Se pesó y midió a mujeres en la comunidad maya de Chun-Yah en el estado de Quintana Roo y se les solicitó que eligieran una figura anatómica con la que se identificaran según su percepción. Resultados: Se obtuvo su índice de masa corporal, su percepción y su deseo por tener un determinado cuerpo. Se encuestó a 51 mujeres mayas en la primera fase quienes tuvieron un promedio de peso de 65 Kg, de estatura de 1.42 m y un IMC de 31.5 kg/m², y más de la mitad se percibieron delgadas. Durante la realización de los grupos focales se detectó una ambivalencia entre su percepción y deseo pues en la comunidad la gordura no es tan estigmatizada. Conclusiones: se discute la necesidad de realizar más estudios empíricos en poblaciones rurales y discutir categorías de análisis diferentes a las biomédicas, como medicalización, lipofobia y discurso médico.

  2. Anterior Chamber Live Loa loa: Case Report.

    Science.gov (United States)

    Kagmeni, G; Cheuteu, R; Bilong, Y; Wiedemann, P

    2016-01-01

    We reported a case of unusual intraocular Loa loa in a 27-year-old patient who presented with painful red eye. Biomicroscopy revealed a living and active adult worm in the anterior chamber of the right eye. After surgical extraction under local anesthesia, parasitological identification confirmed L. loa filariasis.

  3. Liquid ionization chambers for LET determination

    DEFF Research Database (Denmark)

    Kaiser, Franz-Joachim; Bassler, Niels; Tölli, Heikki

    Liquid ionization chambers [1] (LICs) have have been used in the last decades as background dosemeters. Since a few years LICs are also commercially available for dosimetry and are used for measurements of dose distributions where a high spatial distribution is necessary. Also in the last decades...

  4. Precision electronics for ionization chamber measurements

    Energy Technology Data Exchange (ETDEWEB)

    Santry, D.C.; Bowes, G.C.; Munzenmayer, K.

    1987-01-01

    By using commercially available units, an electrometer and an IBM personal computer, it was relatively inexpensive and simple to assemble a system which permits ..gamma..-ray-emitting radionuclide activities to be measured in an ionization chamber with an uncertainty of + - 0.5% and a reproducibility of + - 0.05%.

  5. Isolation of Drosophila egg chambers for imaging.

    Science.gov (United States)

    Parton, Richard M; Vallés, Ana Maria; Dobbie, Ian M; Davis, Ilan

    2010-04-01

    The fruit fly Drosophila melanogaster is an important model for basic research into the molecular mechanisms underlying cell function and development, as well as a major biomedical research tool. A significant advantage of Drosophila is the ability to apply live cell imaging to a variety of living tissues that can be dissected and imaged in vivo, ex vivo, or in vitro. Drosophila egg chambers, for example, have proven to be a useful model system for studying border cell migration, Golgi unit transport, the rapid movement of mRNA and protein particles, and the role of microtubules in meiosis and oocyte differentiation. A crucial first step before imaging is preparation of the experimental material to ensure physiological relevance and to achieve the best conditions for image quality. Early- to mid-stage egg chambers cannot be mounted in an aqueous-based medium, because this causes a change in microtubule organization and follicle cell morphology. Such egg chambers survive better in Halocarbon oil, which allows free diffusion of oxygen, has low viscosity, and thus prevents dehydration and hypoxia. With a refractive index similar to glycerol, Halocarbon oil also has good optical properties for imaging. It also provides a good environment for injection and is particularly useful for long-term imaging of embryos. However, unlike with aqueous solutions, changes in the medium are not possible. This protocol describes the isolation of Drosophila egg chambers.

  6. Using reverberation chambers for EM measurements

    NARCIS (Netherlands)

    Leferink, Frank B.J.

    2010-01-01

    Reverberation chambers (RC) are being used for several decades. The main advantage is the high field strength which can be generated, with only modest power. In the last few years the use of RCs became much popular, for testing multi-path propagation for communication links, or testing the coupling

  7. Prototype Vacuum Chamber for ISR Intersection Region

    CERN Multimedia

    1974-01-01

    The vacuum chambers at the ISR interaction region had to be as transparent as possible to the secondary particles emerging from the collision points. Made from stainless steel or titanium, only a fraction of a millimeter thick, they were most delicate to handle.

  8. Multiphysics Nuclear Thermal Rocket Thrust Chamber Analysis

    Science.gov (United States)

    Wang, Ten-See

    2005-01-01

    The objective of this effort is t o develop an efficient and accurate thermo-fluid computational methodology to predict environments for hypothetical thrust chamber design and analysis. The current task scope is to perform multidimensional, multiphysics analysis of thrust performance and heat transfer analysis for a hypothetical solid-core, nuclear thermal engine including thrust chamber and nozzle. The multiphysics aspects of the model include: real fluid dynamics, chemical reactivity, turbulent flow, and conjugate heat transfer. The model will be designed to identify thermal, fluid, and hydrogen environments in all flow paths and materials. This model would then be used to perform non- nuclear reproduction of the flow element failures demonstrated in the Rover/NERVA testing, investigate performance of specific configurations and assess potential issues and enhancements. A two-pronged approach will be employed in this effort: a detailed analysis of a multi-channel, flow-element, and global modeling of the entire thrust chamber assembly with a porosity modeling technique. It is expected that the detailed analysis of a single flow element would provide detailed fluid, thermal, and hydrogen environments for stress analysis, while the global thrust chamber assembly analysis would promote understanding of the effects of hydrogen dissociation and heat transfer on thrust performance. These modeling activities will be validated as much as possible by testing performed by other related efforts.

  9. Acoustical-Levitation Chamber for Metallurgy

    Science.gov (United States)

    Barmatz, M. B.; Trinh, E.; Wang, T. G.; Elleman, D. D.; Jacobi, N.

    1983-01-01

    Sample moved to different positions for heating and quenching. Acoustical levitation chamber selectively excited in fundamental and second-harmonic longitudinal modes to hold sample at one of three stable postions: A, B, or C. Levitated object quickly moved from one of these positions to another by changing modes. Object rapidly quenched at A or C after heating in furnace region at B.

  10. IKAR, a ionization chamber for WA9

    CERN Document Server

    1976-01-01

    This ionization chamber arrived at CERN from Leningrad for a high precision study of hadron elastic scattering by a CERN-Clermont-Ferrand-Leningrad-Lyon-Uppsala Collaboration in the H3 beam (WA9). G.A. Korolev (third from right) looks at the drawings.

  11. Chamber transport for heavy ion fusion

    Energy Technology Data Exchange (ETDEWEB)

    Olson, Craig L., E-mail: clolson66@msn.com

    2014-01-01

    A brief review is given of research on chamber transport for HIF (heavy ion fusion) dating from the first HIF Workshop in 1976 to the present. Chamber transport modes are categorized into ballistic transport modes and channel-like modes. Four major HIF reactor studies are summarized (HIBALL-II, HYLIFE-II, Prometheus-H, OSIRIS), with emphasis on the chamber transport environment. In general, many beams are used to provide the required symmetry and to permit focusing to the required small spots. Target parameters are then discussed, with a summary of the individual heavy ion beam parameters required for HIF. The beam parameters are then classified as to their line charge density and perveance, with special emphasis on the perveance limits for radial space charge spreading, for the space charge limiting current, and for the magnetic (Alfven) limiting current. The major experiments on ballistic transport (SFFE, Sabre beamlets, GAMBLE II, NTX, NDCX) are summarized, with specific reference to the axial electron trapping limit for charge neutralization. The major experiments on channel-like transport (GAMBLE II channel, GAMBLE II self-pinch, LBNL channels, GSI channels) are discussed. The status of current research on HIF chamber transport is summarized, and the value of future NDCX-II transport experiments for the future of HIF is noted.

  12. Heat-barrier coatings for combustion chambers

    Science.gov (United States)

    Carpenter, H. W.

    1970-01-01

    Arc-plasma-sprayed layered coating of graded Inconel and zirconia protects film-coolant ring below injector plate of rocket engine combustion chamber. Interfacial temperature is designed for minimum buildup of stress and to avoid melting of the metal phase in the graded layers.

  13. A large acceptance cylindrical drift chamber detector

    Energy Technology Data Exchange (ETDEWEB)

    Ambrose, D.A. [Texas Univ., Austin, TX (United States); Bachman, M.G. [Texas Univ., Austin, TX (United States); Coffey, W.P. [Texas Univ., Austin, TX (United States); Glass, G. [Texas Univ., Austin, TX (United States); McNaughton, K.H. [Texas Univ., Austin, TX (United States); Riley, P.J. [Texas Univ., Austin, TX (United States); Adams, D.L. [Rice University, Houston, TX 77251 (United States); Gaussiran, T.L. [Rice University, Houston, TX 77251 (United States); Hungerford, E.V. [University of Houston, Houston, TX 77204 (United States); Lan, K.A. [University of Houston, Houston, TX 77204 (United States); Johnston, K. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); McNaughton, M.W. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Penttila, S.I. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Supek, I. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    1995-10-01

    This paper describes a large acceptance cylindrical drift chamber detector designed and built for the study of the np{yields}pp{pi}{sup -} reaction at neutron beam energies in the range 500-800 MeV. Details of construction, electronics, testing, and detection efficiencies and resolutions are presented. (orig.).

  14. The arrival of the CLOUD chamber

    CERN Multimedia

    CERN AVC

    2009-01-01

    The team from the CLOUD experiment - the world’s first experiment using a high-energy particle accelerator to study the climate - were on cloud nine after the arrival of their new three-metre diameter cloud chamber. This marks the end of three years’ R&D; and design, and the start of preparations for data taking later this year.

  15. Drift Chambers detectors; Detectores de deriva

    Energy Technology Data Exchange (ETDEWEB)

    Duran, I.; Martinez laso, L.

    1989-07-01

    We present here a review of High Energy Physics detectors based on drift chambers. The ionization, drift diffusion, multiplication and detection principles are described. Most common drift media are analysed, and a classification of the detectors according to its geometry is done. Finally the standard read-out methods are displayed and the limits of the spatial resolution are discussed. (Author) 115 refs.

  16. Roofmijten tegen trips in roos

    NARCIS (Netherlands)

    Pijnakker, J.; Leman, A.

    2012-01-01

    De californische trips Frankliniella occidentalis (Pergande) van de familie van de Thripidae komt oorspronkelijk uit de westkust van Californië (Bryan & Smith, 1956). Haar introductie in Europa dateert van 1984. In de glastuinbouw is californische trips, één van de belangrijkste plagen. Ze vormt

  17. Erapooletuid ei olnud / Reet Roos

    Index Scriptorium Estoniae

    Roos, Reet, 1973-

    2006-01-01

    Menetlusest langes välja eelnõu, mille mõte oli, et riik tagaks elatise lapsele, kelle ühelt vanemalt on elatis kohtulikult välja mõistetud, kuid kes seda ise maksta ei taha või ei saa. Sama ka Koit 23. mai 2006, lk. 6 ; Valgamaalane 23. mai 2006, lk. 2 ; Järva Teataja 23. mai 2006, lk. 2 ; Elva Postipoiss 20. mai 2006, lk. 2 ; Vooremaa 16. mai 2006, lk. 2 ; Vali Uudised 17. mai 2006, lk. 2 ; Nädaline 16. mai 2006, lk. 2

  18. Kus asub Ouagadougou? / Reet Roos

    Index Scriptorium Estoniae

    Roos, Reet, 1973-

    2004-01-01

    Ilmunud ka: Nädaline, 21. okt. 2004, lk. 4; Lõunaleht, 21. okt. 2004, lk. 2; Põhjarannik, 22. okt. 2004, lk. 2; Severnoje Poberezhje, 22. okt. 2004, lk. 2; Meie Maa, 22. okt. 2004, lk. 6; Harjumaa, 26. okt. 2004, lk. 2; Hiiu Leht, 26. okt. 2004, lk. 2; Valgamaalane, 9. nov. 2004, lk. 2; Pärnu Postimees, 7. dets. 2004, lk. 15. Autor, arvustades Eesti haridust, leiab, et tsentraalselt ette antud mudelite alusel koolielu korraldamise aeg on lõppenud

  19. Erapooletuid ei olnud / Reet Roos

    Index Scriptorium Estoniae

    Roos, Reet, 1973-

    2006-01-01

    Menetlusest langes välja eelnõu, mille mõte oli, et riik tagaks elatise lapsele, kelle ühelt vanemalt on elatis kohtulikult välja mõistetud, kuid kes seda ise maksta ei taha või ei saa. Sama ka Koit 23. mai 2006, lk. 6 ; Valgamaalane 23. mai 2006, lk. 2 ; Järva Teataja 23. mai 2006, lk. 2 ; Elva Postipoiss 20. mai 2006, lk. 2 ; Vooremaa 16. mai 2006, lk. 2 ; Vali Uudised 17. mai 2006, lk. 2 ; Nädaline 16. mai 2006, lk. 2

  20. Development of Master Chamber Software for Data Acquisition of Ionization Chamber for Indus 2 RRCAT

    OpenAIRE

    Priyesh Soni; Mrs. B. Harita; Nawaz Ali Sayed

    2013-01-01

    The main goal of this paper was to Develop Master control software for DAQ of ionization chamber for INDUS-2 beam lines for detection of X-ray flux by an Ionization chamber that will remotely control and monitor the ultra low current signal detection analog module precisely. This application will be useful to measure the intensity of X-ray flux through ionization chamber in a beam line of synchrotron radiation source which is mounted in INDUS-2. It is one of new technique of detection. Beam l...

  1. Anterior chamber fixation of a posterior chamber intraocular lens: A novel technique

    Directory of Open Access Journals (Sweden)

    A Sahap Kükner

    2014-01-01

    Full Text Available We aimed to evaluate the implantation of a posterior chamber intraocular lens (IOL in the anterior chamber (AC with the haptics passing through two iridectomies to the posterior chamber. A total of 33 eyes of 33 patients with inadequate posterior capsular support due to either previous aphakia or posterior capsular rupture during cataract extraction were included in the study. A double iridectomy was performed on all patients using a vitrectomy probe on the midperiphery of the iris. IOLs were implanted in the AC, and the haptics were passed through the iridectomies to the posterior chamber. The mean follow-up time was 25.3 months. AC hemorrhage occurred in five patients during the iridectomy procedure. Corneal edema was detected in eight of 14 patients with primary IOL insertions. Haptic dislocation was detected in only one patient. This technique may be a good alternative to scleral-fixated IOL implantation in eyes with aphakia.

  2. Achievable field strength in reverberation chambers

    Directory of Open Access Journals (Sweden)

    N. Eulig

    2003-01-01

    Full Text Available Feldvariable Kammern (FVK, engl.: modestirred- chamber werden unter anderem für EMV-Störfestigkeitsprüfungen verwendet. Ein häufig genanntes Argument, das die Einführung dieser Kammern als normgerechte Prüfumgebung vorantreiben soll, ist eine hohe Feldstärke, die im Vergleich zu anderen Testumgebungen mit relativ moderaten HF-Leistungen erreicht werden kann. Besonders für sicherheitskritische Geräte, wie Komponenten aus der Avionik- oder KFZ-Industrie, sind heutzutage Testfeldstärken von mehreren 100 V/m notwendig. Derart hohe Feldstärken können in Umgebungen, die ein ebenes Wellenfeld erzeugen oder nachbilden, nur mit großen HFLeistungen generiert werden. Durch die Resonanzeigenschaften einer FVK können demgegenüber mit sehr viel weniger Leistung und damit Verstärkeraufwand vergleichbare Werte der Feldstärke erzeugt werden. Allerdings sinkt mit zunehmendem Volumen die erreichbare Feldstärke bei gleicher Speiseleistung. Idealerweise sollen Feldvariable Kammern bei möglichst niedrigen Frequenzen für EMVTests nutzbar sein, was jedoch ein großes Kammervolumen erfordert. Das Problem, bei niedrigen Frequenzen hohe Feldstärken erzeugen zu können, relativiert deshalb den Vorteil von FVKn gegenüber bekannten Testumgebungen bei niedrigen Testfrequenzen. Der Posterbeitrag erläutert, welche Feldstärken in verschieden großen Feldvariablen Kammern beim Einspeisen einer bestimmten hochfrequenten Leistung erreicht werden können. Anhand dieser Ergebnisse wird aufgezeigt, oberhalb welcher Grenzfrequenz eine Anwendung von FVKn nur sinnvoll erscheint. Mode-stirred chambers (MSCs can be used for radiated immunity tests in EMC testing. Advantageous compared to conventional test methods is the high field strength which can here be generated with less RF-Power. This point is often the main argument for pushing the standardization of MSCs as an other EMC testing environment. Especially for safety-critical electronic equipment like avionic or

  3. A new plant chamber facility, PLUS, coupled to the atmosphere simulation chamber SAPHIR

    Science.gov (United States)

    Hohaus, T.; Kuhn, U.; Andres, S.; Kaminski, M.; Rohrer, F.; Tillmann, R.; Wahner, A.; Wegener, R.; Yu, Z.; Kiendler-Scharr, A.

    2016-03-01

    A new PLant chamber Unit for Simulation (PLUS) for use with the atmosphere simulation chamber SAPHIR (Simulation of Atmospheric PHotochemistry In a large Reaction Chamber) has been built and characterized at the Forschungszentrum Jülich GmbH, Germany. The PLUS chamber is an environmentally controlled flow-through plant chamber. Inside PLUS the natural blend of biogenic emissions of trees is mixed with synthetic air and transferred to the SAPHIR chamber, where the atmospheric chemistry and the impact of biogenic volatile organic compounds (BVOCs) can be studied in detail. In PLUS all important environmental parameters (e.g., temperature, photosynthetically active radiation (PAR), soil relative humidity (RH)) are well controlled. The gas exchange volume of 9.32 m3 which encloses the stem and the leaves of the plants is constructed such that gases are exposed to only fluorinated ethylene propylene (FEP) Teflon film and other Teflon surfaces to minimize any potential losses of BVOCs in the chamber. Solar radiation is simulated using 15 light-emitting diode (LED) panels, which have an emission strength up to 800 µmol m-2 s-1. Results of the initial characterization experiments are presented in detail. Background concentrations, mixing inside the gas exchange volume, and transfer rate of volatile organic compounds (VOCs) through PLUS under different humidity conditions are explored. Typical plant characteristics such as light- and temperature- dependent BVOC emissions are studied using six Quercus ilex trees and compared to previous studies. Results of an initial ozonolysis experiment of BVOC emissions from Quercus ilex at typical atmospheric concentrations inside SAPHIR are presented to demonstrate a typical experimental setup and the utility of the newly added plant chamber.

  4. A new plant chamber facility PLUS coupled to the atmospheric simulation chamber SAPHIR

    Science.gov (United States)

    Hohaus, T.; Kuhn, U.; Andres, S.; Kaminski, M.; Rohrer, F.; Tillmann, R.; Wahner, A.; Wegener, R.; Yu, Z.; Kiendler-Scharr, A.

    2015-11-01

    A new PLant chamber Unit for Simulation (PLUS) for use with the atmosphere simulation chamber SAPHIR (Simulation of Atmospheric PHotochemistry In a large Reaction Chamber) has been build and characterized at the Forschungszentrum Jülich GmbH, Germany. The PLUS chamber is an environmentally controlled flow through plant chamber. Inside PLUS the natural blend of biogenic emissions of trees are mixed with synthetic air and are transferred to the SAPHIR chamber where the atmospheric chemistry and the impact of biogenic volatile organic compounds (BVOC) can be studied in detail. In PLUS all important enviromental parameters (e.g. temperature, PAR, soil RH etc.) are well-controlled. The gas exchange volume of 9.32 m3 which encloses the stem and the leafes of the plants is constructed such that gases are exposed to FEP Teflon film and other Teflon surfaces only to minimize any potential losses of BVOCs in the chamber. Solar radiation is simulated using 15 LED panels which have an emission strength up to 800 μmol m-2 s-1. Results of the initial characterization experiments are presented in detail. Background concentrations, mixing inside the gas exchange volume, and transfer rate of volatile organic compounds (VOC) through PLUS under different humidity conditions are explored. Typical plant characteristics such as light and temperature dependent BVOC emissions are studied using six Quercus Ilex trees and compared to previous studies. Results of an initial ozonolysis experiment of BVOC emissions from Quercus Ilex at typical atmospheric concentrations inside SAPHIR are presented to demonstrate a typical experimental set up and the utility of the newly added plant chamber.

  5. Convective Regimes in Crystallizing Basaltic Magma Chambers

    Science.gov (United States)

    Gilbert, A. J.; Neufeld, J. A.; Holness, M. B.

    2015-12-01

    Cooling through the chamber walls drives crystallisation in crustal magma chambers, resulting in a cumulate pile on the floor and mushy regions at the walls and roof. The liquid in many magma chambers, either the bulk magma or the interstitial liquid in the mushy regions, may convect, driven either thermally, due to cooling, or compositionally, due to fractional crystallization. We have constructed a regime diagram of the possible convective modes in a system containing a basal mushy layer. These modes depend on the large-scale buoyancy forcing characterised by a global Rayleigh number and the proportion of the chamber height constituting the basal mushy region. We have tested this regime diagram using an analogue experimental system composed of a fluid layer overlying a pile of almost neutrally buoyant inert particles. Convection in this system is driven thermally, simulating magma convection above and within a porous cumulate pile. We observe a range of possible convective regimes, enabling us to produce a regime diagram. In addition to modes characterised by convection of the bulk and interstitial fluid, we also observe a series of regimes where the crystal pile is mobilised by fluid motions. These regimes feature saltation and scouring of the crystal pile by convection in the bulk fluid at moderate Rayleigh numbers, and large crystal-rich fountains at high Rayleigh numbers. For even larger Rayleigh numbers the entire crystal pile is mobilised in what we call the snowglobe regime. The observed mobilisation regimes may be applicable to basaltic magma chambers. Plagioclase in basal cumulates crystallised from a dense magma may be a result of crystal mobilisation from a plagioclase-rich roof mush. Compositional convection within such a mush could result in disaggregation, enabling the buoyant plagioclase to be entrained in relatively dense descending liquid plumes and brought to the floor. The phenocryst load in porphyritic lavas is often interpreted as a

  6. Reproducibility of the chamber scarification test

    DEFF Research Database (Denmark)

    Andersen, Klaus Ejner

    1996-01-01

    The chamber scarification test is a predictive human skin irritation test developed to rank the irritation potential of products and ingredients meant for repeated use on normal and diseased skin. 12 products or ingredients can be tested simultaneously on the forearm skin of each volunteer....... The test combines with the procedure scratching of the skin at each test site and subsequent closed patch tests with the products, repeated daily for 3 days. The test is performed on groups of human volunteers: a skin irritant substance or products is included in each test as a positive control......, and a compound with low irritant potential as a negative control, to obtain relative characterization of the irritant potential of the unknown products. The outcome of tests with a positive and negative control product used repeatedly in 13 chamber scarification tests over a 7-year period is reported, and shows...

  7. The KLOE drift chamber VCI 2001

    Energy Technology Data Exchange (ETDEWEB)

    Adinolfi, M.; Aloisio, A.; Ambrosino, F.; Andryakov, A.; Antonelli, A.; Antonelli, M.; Anulli, F.; Bacci, C.; Bankamp, A.; Barbiellini, G.; Bellini, F.; Bencivenni, G.; Bertolucci, S.; Bini, C.; Bloise, C.; Bocci, V.; Bossi, F.; Branchini, P.; Bulychjov, S.A.; Cabibbo, G.; Calcaterra, A.; Caloi, R.; Campana, P.; Capon, G.; Carboni, G.; Cardini, A.; Casarsa, M.; Cataldi, G.; Ceradini, F.; Cervell, F.; Cevenini, F.; Chiefari, G.; Ciambrone, P.; Conetti, S.; Conticelli, S.; De Lucia, E. E-mail: erika.delucia@roma1.infn.it; De Robertis, G.; De Sangro, R.; De Simone, P.; De Zorzi, G.; Dell' Agnello, S.; Denig, A.; Di Domenico, A.; Di Donato, C.; Di Falco, S.; Doria, A.; Drago, E.; Elia, V.; Erriquez, O.; Farilla, A.; Felici, G.; Ferrari, A.; Ferrer, M.L.; Finocchiaro, G.; Forti, C.; Franceschi, A.; Franzini, P.; Gao, M.L.; Gatti, C.; Gauzzi, P.; Giovannella, S.; Golovatyuk, V.; Gorini, E.; Grancagnolo, F.; Grandegger, W.; Graziani, E.; Guarnaccia, P.; Hagel, U. von.; Han, H.G.; Han, S.W.; Huang, X.; Incagli, M.; Ingrosso, L.; Jang, Y.Y.; Kim, W.; Kluge, W.; Kulikov, V.; Lacava, F.; Lanfranchi, G.; Lee-Franzini, J.; Lomtadze, F.; Luisi, C.; Mao, C.S.; Martemianov, M.; Matsyuk, M.; Mei, W.; Merola, L.; Messi, R.; Miscetti, S.; Moalem, A.; Moccia, S.; Moulson, M.; Mueller, S.; Murtas, F.; Napolitano, M.; Nedosekin, A.; Panareo, M.; Pacciani, L.; Pages, P.; Palutan, M.; Paoluzi, L.; Pasqualucci, E.; Passalacqua, L.; Passaseo, M.; Passeri, A.; Patera, V.; Petrolo, E.; Petrucci, G.; Picca, D.; Pirozzi, G.; Pistillo, C.; Pollack, M.; Pontecorvo, L.; Primavera, M.; Ruggieri, F.; Santangelo, P.; Santovetti, E.; Saracino, G.; Schamberger, R.D.; Schwick, C.; Sciascia, B.; Sciubba, A.; Scuri, F.; Sfiligoi, I.; Shan, J.; Silano, P.; Spadaro, T.; Spagnolo, S.; Spiriti, E.; Stanescu, C.; Tong, G.L.; Tortora, L.; Valente, E.; Valente, P.; Valeriani, B.; Venanzoni, G.; Veneziano, S.; Wu, Y.; Xie, Y.G.; Zhao, P.P.; Zhou, Y

    2002-02-01

    The main goal of the KLOE experiment at the Frascati DAPHINE phi-factory is the study CP violation in kaon decays. The tracking device of the experiment is a drift chamber whose dimensions, 4 m of diameter and 3.3 m length, provide a large acceptance volume for the decay products of low momentum K{sub L} ({lambda}{sub L}=3.4 m). A complete stereo geometry with 12.582 cells arranged in 58 layers guarantees a high and uniform efficiency in the reconstruction of the charged K{sub L} decays. Very light materials have been chosen both for the drift medium, a helium-based gas mixture, and for the mechanical structure, made of carbon fiber, to minimize multiple scattering and conversion of low-energy photons. The design requirements, the adopted solutions together with the calibration procedure and the tracking performances of the drift chamber are discussed.

  8. The KLOE drift chamber VCI 2001

    CERN Document Server

    Adinolfi, M; Ambrosino, F; Andryakov, A; Antonelli, A; Antonelli, M; Anulli, F; Bacci, C; Bankamp, A; Barbiellini, G; Bellini, F; Bencivenni, G; Bertolucci, Sergio; Bini, C; Bloise, C; Bocci, V; Bossi, F; Branchini, P; Bulychjov, S A; Cabibbo, G; Calcaterra, A; Caloi, R; Campana, P; Capon, G; Carboni, G; Cardini, A; Casarsa, M; Cataldi, G; Ceradini, F; Cervell, F; Cevenini, F; Chiefari, G; Ciambrone, P; Conetti, S; Conticelli, S; De Lucia, E; De Robertis, G; De Simone, P; De Zorzi, G; De Sangro, R; Dell'Agnello, S; Denig, A; Di Domenico, A; Di Donato, C; Di Falco, S; Doria, A; Drago, E; Elia, V; Erriquez, O; Farilla, A; Felici, G; Ferrari, A; Ferrer, M L; Finocchiaro, G; Forti, C; Franceschi, A; Franzini, P; Gao, M L; Gatti, C; Gauzzi, P; Giovannella, S; Golovatyuk, V; Gorini, E; Grancagnolo, F; Grandegger, W; Graziani, E; Guarnaccia, P; Han, H G; Han, S W; Huang, X; Incagli, M; Ingrosso, L; Jang, Y Y; Kim, W; Kluge, W; Kulikov, V; Lacava, F; Lanfranchi, G; Lee-Franzini, J; Lomtadze, F; Luisi, C; Mao Chen Sheng; Martemyanov, M; Matsyuk, M; Mei, W; Merola, L; Messi, R; Miscetti, S; Moalem, A; Moccia, S; Moulson, M; Murtas, F; Müller, S; Napolitano, M; Nedosekin, A; Pacciani, L; Pagès, P; Palutan, M; Panareo, M; Paoluzi, L; Pasqualucci, E; Passalacqua, L; Passaseo, M; Passeri, A; Patera, V; Petrolo, E; Petrucci, Guido; Picca, D; Pirozzi, G; Pistillo, C; Pollack, M; Pontecorvo, L; Primavera, M; Ruggieri, F; Santangelo, P; Santovetti, E; Saracino, G; Schamberger, R D; Schwick, C; Sciascia, B; Sciubba, A; Scuri, F; Sfiligoi, I; Shan, J; Silano, P; Spadaro, T; Spagnolo, S; Spiriti, E; Stanescu, C; Tong, G L; Tortora, L; Valente, E; Valente, P; Valeriani, B; Venanzoni, G; Veneziano, Stefano; Von Hagel, U; Wu, Y; Xie, Y G; Zhao, P P; Zhou, Y

    2002-01-01

    The main goal of the KLOE experiment at the Frascati DAPHINE phi-factory is the study CP violation in kaon decays. The tracking device of the experiment is a drift chamber whose dimensions, 4 m of diameter and 3.3 m length, provide a large acceptance volume for the decay products of low momentum K sub L (lambda sub L =3.4 m). A complete stereo geometry with 12.582 cells arranged in 58 layers guarantees a high and uniform efficiency in the reconstruction of the charged K sub L decays. Very light materials have been chosen both for the drift medium, a helium-based gas mixture, and for the mechanical structure, made of carbon fiber, to minimize multiple scattering and conversion of low-energy photons. The design requirements, the adopted solutions together with the calibration procedure and the tracking performances of the drift chamber are discussed.

  9. Angular resolution of stacked resistive plate chambers

    CERN Document Server

    Samuel, Deepak; Murgod, Lakshmi P

    2016-01-01

    We present here detailed derivations of mathematical expressions for the angular resolution of a set of stacked resistive plate chambers (RPCs). The expressions are validated against experimental results using data collected from the prototype detectors (without magnet) of the upcoming India-based Neutrino Observatory (INO). In principle, these expressions can be used for any other detector with an architecture similar to that of RPCs.

  10. Development and progress in resistive plate chamber

    Institute of Scientific and Technical Information of China (English)

    CHEN Hong-Fang; WU Jian

    2004-01-01

    Resistive Plate Chamber (RPC) is a robust and low cost gas detector, which is extensively used in high-energy physics, cosmic and astroparticle physics experiments. Over the past twenty years, as a particle detector,RPC has made remarkable progress. The main achievements, features and results of experiemantal tests including R&D and production of the RPCs by several Chinese groups in recent years are reported in this article.

  11. Visual-Inspection Probe For Cryogenic Chamber

    Science.gov (United States)

    Friend, Steve; Valenzuela, James; Yoshinaga, Jay

    1990-01-01

    Visual-inspection probe that resembles borescope enables observer at ambient temperature to view objects immersed in turbulent flow of liquid oxygen, liquid nitrogen, or other cryogenic fluid. Design of probe fairly conventional, except special consideration given to selection of materials and to thermal expansion to provide for expected range of operating temperatures. Penetrates wall of cryogenic chamber to provide view of interior. Similar probe illuminates scene. View displayed on video monitor.

  12. The Bern Infinitesimal Bubble Chamber (BIBC)

    CERN Multimedia

    CERN PhotoLab

    1977-01-01

    The chamber body was machined from a block of aluminium. The visible volume was cylindrical with 65 mm diameter and 35 mm depth. It was filled with propane or freon. It was meant as vertex detector in the search of short-lived particles. It was also used with in-line holography resulting in 8 µm bubble size and 9 cm depth of the field. See E. Ramseyer, B. Hahn and E. Hugentobler, Nucl. Instrum. Methods 201 (1982) 335.

  13. Performance of the ATLAS resistive plate chambers

    Energy Technology Data Exchange (ETDEWEB)

    Cattani, Giordano, E-mail: giordano.cattani@cern.ch [INFN and University of Rome & #x27; Tor Vergata& #x27; , via della Ricerca Scientifica, 1 00133 Rome (Italy)

    2012-01-01

    An overview and results of the effort to monitor and measure the relevant quantities of the Resistive Plate Chamber detectors are presented, addressing in particular three aspects. First, the full exploitation of the high-precision tracking provided by ATLAS Monitored Drift Tubes when measuring the performance of the RPCs. Second, the use of a dedicated data stream to achieve the required statistics. Last, the central role of GRID facilities in providing the necessary computing resources.

  14. Sequential Notch activation regulates ventricular chamber development

    OpenAIRE

    D'Amato, Gaetano

    2016-01-01

    Tesis doctoral inédita, leída en la Universidad Autónoma de Madrid, Facultad de Medicina, Departamento de Bioquímica. Fecha de lectura: 15 de enero de 2016 Ventricular chamber morphogenesis is a beautiful example of tissue interactions orchestrating a precise gene regulatory network essential for tissue patterning, cellular proliferation and differentiation that ultimately lead to a fully compacted and functional adult ventricle. The Notch signaling pathway is a crucial regulator ...

  15. Vacuum Chamber for the Booster Bending Magnets

    CERN Multimedia

    1974-01-01

    To minimise eddy currents, induced by the rising magnetic field, the chamber was made from thin stainless steel of high specific electric resistance. For mechanical strength, it was corrugated in a hydro-forming process. The cross-section was designed for maximum strength and maximum aperture. To accept particles with simultaneous large amplitudes in both planes, the cross-section approaches a rectangular shape (see also 7402463).

  16. Update on Scroll Compressor Chamber Geometry

    OpenAIRE

    Bell, Ian; Groll, Eckhard; Braun, James; King, Galen

    2010-01-01

    The geometry of the scroll compressor determines the efficiency of the scroll compressor and controls all elements of its operation. It is therefore critical to be able to accurately model the volumes of the compressor over the course of a revolution. This paper proposes a novel quasi-analytic formulation of the suction, compression and discharge chambers based on a change of variables from involute angle to polar integration angle. This solution has been compared against a reference polyg...

  17. Wire chambers with their magnetostrictive readout

    CERN Multimedia

    1974-01-01

    This set of wire chamber planes shaped as a cylinder sector was installed inside the magnet of a polarized spin target modified to allow as well momentum analysis of the produced particles. The experiment (S126) was set up by the CERN-Trieste Collaboration in the PS beam m9 to measure spin effects in the associated production of of a positive kaon and a positive Sigma by interaction of a positive pion with polarized protons.

  18. Improvement of a New Gas Ionization Chamber

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In order to identify heavier elements, we have developed a new longitudinal field gas ionization chamber (IC)with an angle of 30° of plate (as shown in Fig.1). The IC is operated in flowing iso-butane gas at a pressure of 10kPa. After testing by using a 3- component α particle source and comparing with the old longitudinal field

  19. Bubble chamber: D meson production and decay

    CERN Multimedia

    1978-01-01

    This event shows real particle tracks from the Big European Bubble Chamber (BEBC), which was used to observe neutrino and hadron beams between 1973 and 1984 from the PS and SPS accelerators. In this event a neutrino interacts with a proton producing an excited D meson. A labeled diagram is seen on the right as the particles spiral in the magnetic field of the detector.

  20. RF Anechoic Chambers, Tri-Service Research Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — In collaboration with the Navy, there are 12 RF Anechoic and static free exposure chambers located at TSRL. These chambers cover the majority of the RF spectrum and...

  1. RF Anechoic Chambers, Tri-Service Research Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — In collaboration with the Navy, there are 12 RF Anechoic and static free exposure chambers located at TSRL. These chambers cover the majority of the RF spectrum and...

  2. Diurnal Variation of Anterior Chamber Flare

    Directory of Open Access Journals (Sweden)

    Mehmet Adam

    2015-04-01

    Full Text Available Objectives: To investigate the ideal time and reproducibility of anterior chamber flare measurements. Materials and Methods: Anterior chamber flare measurements were performed with laser flaremetre device at 8 am to 45 volunteers and these measurements were repeated on the same day at 12 pm and 4 pm. Results: Twenty-five (55.5% of the volunteers were women and 20 (44.5% were men; mean age was 28.67±7.40 (18-49 years. The mean anterior chamber flare measurements taken following the ophthalmologic examination were 5.94±1.41 foton/msn at 8 am, 5.65±1.45 foton/msn at 12 pm, and 5.79±1.20 foton/msn at 4 pm. No statistical difference was found between the measurements (p=0.08. Subgroup analysis according to eye color, revealed no significant difference between flare measurements in brown, hazel, and green eyes (p=0.21. Correlation analysis demonstrated association between age and all flare measurements within the day (r=0.24, p=0.03; r=0.41, p=0.01, r=0.27, p=0.01. Conclusion: No significant diurnal change was detected in the flare measurements of our study subjects but positive correlation with age was observed. Hence, all flare measurements within a day are reliable and have high repeatability in healthy subjects. (Turk J Ophthalmol 2015; 45: 52-5

  3. Posterior Chamber Hemorrhage during Fluorescein Angiography

    Directory of Open Access Journals (Sweden)

    Manuel A. P. Vilela

    2015-01-01

    Full Text Available This paper provides the first reported case of acute posterior chamber hemorrhage during fluorescein angiography (FA. This is a case review with serial color photographs of the anterior segment. A 76-year-old male was referred for angiographic control of age-related macular degeneration. He was pseudophakic OU, BCVA 20/40 OU. He had mild hypertension, but not diabetes. He had had two previous angiograms without adverse effects. Difficulty was experienced in obtaining the images owing to a progressive reduction in the transparency of the media. A dense hemorrhage in the posterior chamber of the right eye was found, involving the visual axis. Thorough biomicroscopy, gonioscopy, and ultrasonic biomicroscopy showed that part of one of the haptics of the right intraocular lens (IOL was touching and tearing the posterior face of the iris, without any visible synechiae, iris, or angle neovascularization. Anterior segment FA and posterior ultrasonography were normal. No similar case has been described in the literature involving dense progressive bleeding located in the capsular bag and posterior chamber, without any detectable triggering ocular event other than mydriasis and fluorescein injection. Contact of the iris or sulcus with part of the intraocular lens, aggravated by the intense use of mydriatics during the FA procedure, probably caused bleeding to happen.

  4. Sperm Cell Dynamics in Shallow Chambers

    Science.gov (United States)

    Condat, Carlos; Marconi, Veronica; Guidobaldi, Alejandro; Giojalas, Laura; Silhanek, Alejandro; Jeyaram, Yogesh; Moshchalkov, Victor

    2015-03-01

    Self-propelled microorganisms are attracted to surfaces. This makes their dynamic behavior in restricted geometries very different from that observed in the bulk. Here we analyze the motion of spermatozoids confined to shallow chambers, investigating the nature of the cell trajectories and their accumulation near the side boundaries. Observed cell trajectories are composed of a succession of quasi-circular and quasi-linear segments. This suggests that the cells follow a path of intermittent trappings near the top and down surfaces separated by stretches of quasi-free motion near the center of the gap. Use of microstructured petal-shaped edges limits accumulation near the borders and contributes to increase the concentration in the chamber interior. System stabilization occurs over times of the order of minutes, which agrees well with a theoretical estimate that assumes that the cell mean-square displacement is largely due to the quasi-linear segments. Pure quasi-circular trajectories would require several hours to stabilize. Our estimates also indicate that stabilization proceeds 2.5 times faster in the rosette geometries than in the smooth-edged chambers, which is another practical reason to prefer the former.

  5. SU-E-T-758: To Determine the Source Dwell Positions of HDR Brachytherapy Using 2D 729 Ion Chamber Array

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Syam [Malabar Cancer Centre, Kannur, Kerala (India); Sitha [University of Calicut, Calicut, Kerala (India)

    2015-06-15

    Purpose: Determination of source dwell positions of HDR brachytherapy using 2D 729 ion chamber array Methods: Nucletron microselectron HDR and PTW 2D array were used for the study. Different dwell positions were assigned in the HDR machine. Rigid interstitial needles and vaginal applicator were positioned on the 2D array. The 2D array was exposed for this programmed dwell positions. The positional accuracy of the source was analyzed after the irradiation of the 2D array. This was repeated for different dwell positions. Different test plans were transferred from the Oncentra planning system and irradiated with the same applicator position on the 2D array. The results were analyzed using the in house developed excel program. Results: Assigned dwell positions versus corresponding detector response were analyzed. The results show very good agreement with the film measurements. No significant variation found between the planned and measured dwell positions. Average dose response with 2D array between the planned and nearby dwell positions was found to be 0.0804 Gy for vaginal cylinder applicator and 0.1234 Gy for interstitial rigid needles. Standard deviation between the doses for all the measured dwell positions for interstitial rigid needle for 1 cm spaced positions were found to be 0.33 and 0.37 for 2cm spaced dwell positions. For intracavitory vaginal applicator this was found to be 0.21 for 1 cm spaced dwell positions and 0.06 for 2cm spaced dwell positions. Intracavitory test plans reproduced on the 2D array with the same applicator positions shows the ideal dose distribution with the TPS planned. Conclusion: 2D array is a good tool for determining the dwell position of HDR brachytherapy. With the in-house developed program in excel it is easy and accurate. The traditional way with film analysis can be replaced by this method, as the films will be more costly.

  6. Wireless transmission of biosignals for hyperbaric chamber applications

    OpenAIRE

    Perez-Vidal, Carlos; Gracia, Luis; Carmona, Cristian; Alorda, Bartomeu; Salinas, Antonio

    2017-01-01

    This paper presents a wireless system to send biosignals outside a hyperbaric chamber avoiding wires going through the chamber walls. Hyperbaric chambers are becoming more and more common due to new indications of hyperbaric oxygen treatments. Metallic walls physically isolate patients inside the chamber, where getting a patient?s vital signs turns into a painstaking task. The paper proposes using a ZigBee-based network to wirelessly transmit the patient's biosignals to the outside of the cha...

  7. Smart ionization chamber for gamma-ray monitoring

    OpenAIRE

    Drndarević Vujo R.; Jevtić Nenad J.; Rajović Vladimir M.; Stanković Srboljub J.

    2014-01-01

    A design and implementation of a smart ionization chamber suitable for connection into gamma radiation monitoring networks is presented in this paper. The smart ionization chamber consists of air-equivalent one liter ionization chamber with associated electronics and a built-in memory for storage of electronic data specifications. Generally, operating and measurement characteristics of the used ionization chamber are written into the memory chip attached to...

  8. Herds of methane chambers grazing bubbles

    Science.gov (United States)

    Grinham, Alistair; Dunbabin, Matthew

    2014-05-01

    Water to air methane emissions from freshwater reservoirs can be dominated by sediment bubbling (ebullitive) events. Previous work to quantify methane bubbling from a number of Australian sub-tropical reservoirs has shown that this can contribute as much as 95% of total emissions. These bubbling events are controlled by a variety of different factors including water depth, surface and internal waves, wind seiching, atmospheric pressure changes and water levels changes. Key to quantifying the magnitude of this emission pathway is estimating both the bubbling rate as well as the areal extent of bubbling. Both bubbling rate and areal extent are seldom constant and require persistent monitoring over extended time periods before true estimates can be generated. In this paper we present a novel system for persistent monitoring of both bubbling rate and areal extent using multiple robotic surface chambers and adaptive sampling (grazing) algorithms to automate the quantification process. Individual chambers are self-propelled and guided and communicate between each other without the need for supervised control. They can maintain station at a sampling site for a desired incubation period and continuously monitor, record and report fluxes during the incubation. To exploit the methane sensor detection capabilities, the chamber can be automatically lowered to decrease the head-space and increase concentration. The grazing algorithms assign a hierarchical order to chambers within a preselected zone. Chambers then converge on the individual recording the highest 15 minute bubbling rate. Individuals maintain a specified distance apart from each other during each sampling period before all individuals are then required to move to different locations based on a sampling algorithm (systematic or adaptive) exploiting prior measurements. This system has been field tested on a large-scale subtropical reservoir, Little Nerang Dam, and over monthly timescales. Using this technique

  9. High counting rate resistive-plate chamber

    Science.gov (United States)

    Peskov, V.; Anderson, D. F.; Kwan, S.

    1993-05-01

    Parallel-plate avalanche chambers (PPAC) are widely used in physics experiments because they are fast (less than 1 ns) and have very simple construction: just two parallel metallic plates or mesh electrodes. Depending on the applied voltage they may work either in spark mode or avalanche mode. The advantage of the spark mode of operation is a large signal amplitude from the chamber, the disadvantage is that there is a large dead time (msec) for the entire chamber after an event. The main advantage of the avalanche mode is high rate capability 10(exp 5) counts/mm(sup 2). A resistive-plate chamber (RPC) is similar to the PPAC in construction except that one or both of the electrodes are made from high resistivity (greater than 10(exp 10) Omega(cm) materials. In practice RPC's are usually used in the spark mode. Resistive electrodes are charged by sparks, locally reducing the actual electric field in the gap. The size of the charged surface is about 10 mm(sup 2), leaving the rest of the detector unaffected. Therefore, the rate capability of such detectors in the spark mode is considerably higher than conventional spark counters. Among the different glasses tested the best results were obtained with electron type conductive glasses, which obey Ohm's law. Most of the work with such glasses was done with high pressure parallel-plate chambers (10 atm) for time-of-flight measurements. Resistive glasses have been expensive and produced only in small quantities. Now resistive glasses are commercially available, although they are still expensive in small scale production. From the positive experience of different groups working with the resistive glasses, it was decided to review the old idea to use this glass for the RPC. This work has investigated the possibility of using the RPC at 1 atm and in the avalanche mode. This has several advantages: simplicity of construction, high rate capability, low voltage operation, and the ability to work with non-flammable gases.

  10. Installation and Commissioning of the new GLM Implantation Chamber

    CERN Document Server

    Pohl, Christoph

    2016-01-01

    Summer student report about the work with the new implantation chamber for the GLM branch of ISOLDE. In the context of this project an API for the vacuum system of the new chamber was developed and implemented in web application that will be used to control the new implantation chamber at some point.

  11. Engineering analyses of large precision cathode strip chambers for GEM

    Energy Technology Data Exchange (ETDEWEB)

    Horvath, J.A.; Belser, F.C.; Pratuch, S.M.; Wuest, C.R. [Lawrence Livermore National Lab., CA (United States); Mitselmakher, G. [Superconducting Super Collider Lab., Dallas, TX (United States); Gordeev, A. [Institute of Theoretical and Experimental Physics, Moscow (Russian Federation); Johnson, C.V. [Lawrence Livermore National Lab., CA (United States)]|[Superconducting Super Collider Lab., Dallas, TX (United States); Polychronakos, V.A. [Brookhaven National Lab., Upton, NY (United States); Golutvin, I.A. [Joint Institute for Nuclear Research, Dubna (Russian Federation)

    1993-10-21

    Structural analyses of large precision cathode strip chambers performed up to the date of this publication are documented. Mechanical property data for typical chamber materials are included. This information, originally intended to be an appendix to the {open_quotes}CSC Structural Design Bible,{close_quotes} is presented as a guide for future designers of large chambers.

  12. Anechoic chamber in industrial plants. [construction materials and structural design

    Science.gov (United States)

    Halpert, E.; Juncu, O.; Lorian, R.; Marfievici, D.; Mararu, I.

    1974-01-01

    A light anechoic chamber for routine acoustical measurements in the machine building industry is reported. The outer housing of the chamber consists of modules cast in glass fiber reinforced polyester resin; the inner housing consists of pyramidal modules cut out of sound absorbing slates. The parameters of this anechoic chamber facilitate acoustical measurements according to ISO and CAEM recommendations.

  13. Evaluation of Carbon Dioxide Dissipation within a Euthanasia Chamber

    Science.gov (United States)

    Djoufack-Momo, Shelly M; Amparan, Ashlee A; Grunden, Beverly; Boivin, Gregory P

    2014-01-01

    CO2 euthanasia is used widely for small laboratory animals, such as rodents. A common necessity in many animal research facilities is to euthanize mice in sequential batches. We assessed the effects of several variables on the time it took for CO2 to dissipate within a chamber. Using standard euthanasia time, changes in flow rate were compared between a slow 15% fill rate for 7 min, and a slow 15% followed by a rapid 50% filling for a total of 5 min. Additional variables assessed included the effects of opening the lid after the completion of chamber filling, turning the chamber over after completion of filling, and the use and removal of a cage from within the chamber. For all trials, CO2 levels in the chambers peaked between 50% and 80%. After the gas was turned off, the concentration of CO2 dropped to below 10% CO2 within 2 min, except when the lid was left on the chamber, where concentration levels remained above 10% after 20 min. CO2 dissipation was significantly faster when the chamber was turned upside down after filling. Significant interaction effects occurred among the factors of cage presence within the chamber, flow rate, and chamber position. Only leaving the lid on the chamber had any practical implication for delaying CO2 dissipation. We recommend that users allow 2 min for CO2 to clear from the chamber before subsequent euthanasia procedures, unless the chamber is manipulated to increase the dissipation rate. PMID:25199098

  14. Characterization of a homemade ionization chamber for radiotherapy beams.

    Science.gov (United States)

    Neves, Lucio P; Perini, Ana P; dos Santos, Gelson P; Xavier, Marcos; Khoury, Helen J; Caldas, Linda V E

    2012-07-01

    A homemade cylindrical ionization chamber was studied for routine use in therapy beams of (60)Co and X-rays. Several characterization tests were performed: leakage current, saturation, ion collection efficiency, polarity effect, stability, stabilization time, chamber orientation and energy dependence. All results obtained were within international recommendations. Therefore the homemade ionization chamber presents usefulness for routine dosimetric procedures in radiotherapy beams.

  15. Anechoic chamber in industrial plants. [construction materials and structural design

    Science.gov (United States)

    Halpert, E.; Juncu, O.; Lorian, R.; Marfievici, D.; Mararu, I.

    1974-01-01

    A light anechoic chamber for routine acoustical measurements in the machine building industry is reported. The outer housing of the chamber consists of modules cast in glass fiber reinforced polyester resin; the inner housing consists of pyramidal modules cut out of sound absorbing slates. The parameters of this anechoic chamber facilitate acoustical measurements according to ISO and CAEM recommendations.

  16. A cylindrical drift chamber with azimuthal and axial position readout

    Energy Technology Data Exchange (ETDEWEB)

    Bar-Yam, Z.; Cummings, J.P.; Dowd, J.P.; Eugenio, P.; Hayek, M.; Kern, W.; King, E.; Shenhav, N.; Chung, S.U.; Hackenburg, R.W.; Olchanski, C.; Weygand, D.P.; Willutzki, H.J.; Brabson, B.B.; Crittenden, R.R.; Dzierba, A.R.; Gunter, J.; Lindenbusch, R.; Rust, D.R.; Scott, E.; Smith, P.T.; Sulanke, T.; Teige, S.; Denisov, S.; Dushkin, A.; Kochetkov, V.; Lipaev, V.; Popov, A.; Shein, I.; Soldatov, A.; Anoshina, E.V.; Bodyagin, V.A.; Demianov, A.I.; Gribushin, A.M.; Kodolova, O.L.; Korotkikh, V.L.; Kostin, M.A.; Ostrovidov, A.I.; Sarycheva, L.I.; Sinev, N.B.; Vardanyan, I.N.; Yershov, A.A.; Adams, T.; Bishop, J.M.; Cason, N.M.; Sanjari, A.H.; LoSecco, J.M.; Manak, J.J.; Shephard, W.D.; Stienike, D.L.; Taegar, S.A.; Thompson, D.R.; Brown, D.S.; Pedlar, T.; Seth, K.K.; Wise, J.; Zhao, D.; Adams, G.S.; Napolitano, J.; Nozar, M.; Smith, J.A.; Witkowski, M. [Massachusetts Univ., North Dartmouth, MA (United States)]|[Brookhaven National Laboratory, Upton, L.I., NY 11973 (United States)]|[Indiana University, Bloomington, IN 47405 (United States)]|[Institute for High Energy Physics, Protvino (Russian Federation)]|[Institute of Nuclear Physics, Moscow State University, Moscow (Russian Federation)]|[University of Notre Dame, Notre Dame, IN 46556 (United States)]|[Northwestern University, Evanston, IL 60208 (United States)]|[Rensselaer Polytechnic Institute, Troy, NY 12180 (United States)

    1997-02-21

    A cylindrical multiwire drift chamber with axial charge-division has been constructed and used in experiment E852 at Brookhaven National Laboratory. It serves as a trigger element and as a tracking device for recoil protons in {pi}{sup -}p interactions. We describe the chamber`s design considerations, details of its construction, electronics, and performance characteristics. (orig.).

  17. Evaluation of carbon dioxide dissipation within a euthanasia chamber.

    Science.gov (United States)

    Djoufack-Momo, Shelly M; Amparan, Ashlee A; Grunden, Beverly; Boivin, Gregory P-

    2014-07-01

    CO₂ euthanasia is used widely for small laboratory animals, such as rodents. A common necessity in many animal research facilities is to euthanize mice in sequential batches. We assessed the effects of several variables on the time it took for CO₂ to dissipate within a chamber. Using standard euthanasia time, changes in flow rate were compared between a slow 15% fill rate for 7 min, and a slow 15% followed by a rapid 50% filling for a total of 5 min. Additional variables assessed included the effects of opening the lid after the completion of chamber filling, turning the chamber over after completion of filling, and the use and removal of a cage from within the chamber. For all trials, CO₂ levels in the chambers peaked between 50% and 80%. After the gas was turned off, the concentration of CO₂ dropped to below 10% COv within 2 min, except when the lid was left on the chamber, where concentration levels remained above 10% after 20 min. CO₂ dissipation was significantly faster when the chamber was turned upside down after filling. Significant interaction effects occurred among the factors of cage presence within the chamber, flow rate, and chamber position. Only leaving the lid on the chamber had any practical implication for delaying CO₂ dissipation. We recommend that users allow 2 min for CO₂ to clear from the chamber before subsequent euthanasia procedures, unless the chamber is manipulated to increase the dissipation rate.

  18. Bi-cone vacuum chamber in the ISR

    CERN Multimedia

    1976-01-01

    The "bi-cone" vacuum chamber in ISR intersection I-7, for experiment R702. Made from 0.28 mm thick titanium, it was at its time the most transparent chamber ever built. Ian Wilson is standing next to the chamber. See also 7609219.

  19. Test of an undulated vacuum chamber for the ISR

    CERN Multimedia

    1975-01-01

    This picture shows mechanical tests of an undulated vacuum chamber for downstream arms of ISR intersections. This chamber, made of 0.3 mm thick inconel, had inner dimensions of 150 mm by 50 mm. The deflection under vacuum is measured by dial gauges. On the left one sees the large vessel where vacuum chambers were tested at pressures above atmospheric pressure.

  20. 30 CFR 57.7807 - Flushing the combustion chamber.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Flushing the combustion chamber. 57.7807... and Rotary Jet Piercing Rotary Jet Piercing-Surface Only § 57.7807 Flushing the combustion chamber. The combustion chamber of a jet drill stem which has been sitting unoperated in a drill hole shall be...

  1. 30 CFR 56.7807 - Flushing the combustion chamber.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Flushing the combustion chamber. 56.7807 Section 56.7807 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Rotary Jet Piercing Rotary Jet Piercing § 56.7807 Flushing the combustion chamber. The combustion chamber...

  2. A novel non invasive measurement of hemodynamic parameters: Comparison of single-chamber ventricular and dual-chamber pacemaker

    Directory of Open Access Journals (Sweden)

    Ingrid M. Pardede

    2008-03-01

    Full Text Available We carried out a cross sectional study to analyze hemodynamic parameters of single-chamber ventricular pacemaker compared with dual-chamber pacemaker by using thoracic electrical bioimpedance monitoring method (Physio Flow™ - a novel simple non-invasive measurement. A total of 48 consecutive outpatients comprised of 27 single chamber pacemaker and 21 dual chamber were analyzed. We measured cardiac parameters: heart rate, stroke volume index, cardiac output index, estimated ejection fraction, end diastolic volume, early diastolic function ratio, thoracic fluid index, and systemic parameters: left cardiac work index and systemic vascular resistance index. Baseline characteristic and pacemaker indication were similar in both groups. Cardiac parameters assessment revealed no significant difference between single-chamber pacemaker and dual-chamber pacemaker in heart rate, stroke volume index, cardiac index, estimated ejection fraction, end-diastolic volume, thoracic fluid index. There was significantly higher early diastolic function ratio in single-chamber pacemaker compared to dual-chamber pacemaker: 92% (10.2-187.7% vs. 100.6% (48.7-403.2%; p=0.006. Systemic parameters assessment revealed significantly higher left cardiac work index in single-chamber group than dual-chamber group 4.9 kg.m/m² (2.8-7.6 kg.m/m² vs. 4.3 kg.m/m² (2.9-7.2 kg.m/m²; p=0.004. There was no significant difference on systemic vascular resistance in single-chamber compared to dual-chamber pacemaker. Single-chamber ventricular pacemaker provides similar stroke volume, cardiac output and left cardiac work, compared to dual-chamber pacemaker. A non-invasive hemodynamic measurement using thoracic electrical bioimpedance is feasible for permanent pacemaker outpatients. (Med J Indones 2008; 17: 25-32Keywords: Permanent pacemaker, single chamber, dual chamber, thoracic electrical bioimpedance, hemodynamic parameter

  3. Wireless transmission of biosignals for hyperbaric chamber applications.

    Science.gov (United States)

    Perez-Vidal, Carlos; Gracia, Luis; Carmona, Cristian; Alorda, Bartomeu; Salinas, Antonio

    2017-01-01

    This paper presents a wireless system to send biosignals outside a hyperbaric chamber avoiding wires going through the chamber walls. Hyperbaric chambers are becoming more and more common due to new indications of hyperbaric oxygen treatments. Metallic walls physically isolate patients inside the chamber, where getting a patient's vital signs turns into a painstaking task. The paper proposes using a ZigBee-based network to wirelessly transmit the patient's biosignals to the outside of the chamber. In particular, a wearable battery supported device has been designed, implemented and tested. Although the implementation has been conducted to transmit the electrocardiography signal, the device can be easily adapted to consider other biosignals.

  4. Advanced Modified High Performance Synthetic Jet Actuator with Curved Chamber

    Science.gov (United States)

    Xu, Tian-Bing (Inventor); Su, Ji (Inventor); Jiang, Xiaoning (Inventor)

    2014-01-01

    The advanced modified high performance synthetic jet actuator with optimized curvature shape chamber (ASJA-M) is a synthetic jet actuator (SJA) with a lower volume reservoir or chamber. A curved chamber is used, instead of the conventional cylinder chamber, to reduce the dead volume of the jet chamber and increase the efficiency of the synthetic jet actuator. The shape of the curvature corresponds to the maximum displacement (deformation) profile of the electroactive diaphragm. The jet velocity and mass flow rate for the ASJA-M will be several times higher than conventional piezoelectric actuators.

  5. Comparison between Electronic Portal Imaging Devices and ion chamber matrix for intensity-modulated radiotherapy quality assurance; Comparacao entre Dispositivos Eletronicos de Imagens Portais e matriz de camaras de ionizacao para garantia da qualidade de radioterapia de intensidade modulada

    Energy Technology Data Exchange (ETDEWEB)

    Silveira, Thiago B.; Rosa, Luiz A.R., E-mail: thiago.fisimed@gmail.com [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Lima, Marilia B., E-mail: thiago.fisimed@gmail.com [Instituto Nacional do Cancer (INCA), Rio de Janeiro, RJ (Brazil). Departamento de Fisica Medica

    2012-08-15

    The treatment with intensity-modulated radiotherapy (IMRT) demands an individual and specific quality assurance procedure. The use of ion chamber matrix is a well establish method to dose distribution verifications, despite the lower spatial resolution. An alternative method arising is the use of the Electronic Portal Imaging Devices (EPIDs). The aim of this paper is to validate the EPID use for quality assurance of IMRT comparing it to the previous method employing an ion chamber matrix. We analyzed 10 treatment planning for different tumor sites and photons energies of the linac Trilogy (Varian Medical Systems). We used Sliding-window IMRT and the measurements were acquired in EPID and in Physikalisch-Technische Werkstaetten (PTW) 2D Array seven29. Two different software were used to analyze the data: Verisoft version 4.0, for Array data; and Eclipse 8.6 with Portal Dosimetry for EPID data. The evaluation of concordance levels between measured and predicted images used the Gamma Index tool with 3% of dose difference and 3 mm of distance to agreement. The EPID showed worse results for approval percentiles, in average 2.17%, and bigger values of average gamma index, although its analysis confirmed the approvals of all planning. This happens because of the better sensitivity generated by the higher spatial resolution of the EPID, 0,784 mm against 1,0 cm of the Array, so it has bigger capacity to identify small dose variations. The EPID, jointly with the Portal Dosimetry, proved to be excellent tools to perform pre-treatment IMRT verifications, providing significant gain in dose distribution analysis. Also, the EPID is easier for positioning, for images manipulation, for data acquisition and analysis and has detection area 60% bigger. (author)

  6. Análisis del comportamiento estadístico y aproximación fractal en la recaudación del impuesto sobre nóminas y asimilados en el estado de Quintana Roo

    Directory of Open Access Journals (Sweden)

    Sergio Lagunas Puls

    2014-01-01

    Full Text Available ste trabajo analiza la recaudación del impuesto sobre nóminasy asimilados en el estado de Quintana Roo de 2000 a 2010.La aportación principal es identificar el comportamiento es-tadístico recaudatorio mediante la aproximación fractal, esta-bleciendo patrones iterativos en el nivel estatal, municipal, porla totalidad de la serie analizada de 132 meses y en periodosmenores, sirviendo como detonante para aplicarse en otras lo-calidades y gravámenes con el fin de profundizar en algunascaracterísticas de la fiscalidad. Dos criterios estadísticos fueronempleados para determinar la normalidad, o no, de las series derecaudación fiscal municipal en el periodo de estudio; dichoscriterios son el de la regla empírica y el que utiliza parámetrosdel teorema de Chebyshev; como contraste, se aplicó la prue-ba Jarque-Bera a los residuos, concluyendo que la recaudaciónpor ejercicio fiscal en Quintana Roo (con datos municipalesno sigue una distribución normal, razón por la cual se utilizó laaproximación fractal. Los resultados con datos de recaudaciónfiscal por municipios para ese estado muestran la presencia deun comportamiento fractal (repetitivo y cíclico en la recau-dación, lo que puede interpretarse como la presencia de unabase fiscal consolidada, justificando así la conclusión de quehay fuerza (el nivel de recaudación observado en las finanzaspúblicas locales. La misma conclusión se tiene, con diferentescortes temporales, al analizar y detectar presencia de compor-tamiento fractal específica para la recaudación observada enlos municipios de Benito Juárez (Cozumel y Othón P. Blanco,de 2000 a 2010.

  7. The Evolution and Development of Cephalopod Chambers and Their Shape.

    Science.gov (United States)

    Lemanis, Robert; Korn, Dieter; Zachow, Stefan; Rybacki, Erik; Hoffmann, René

    2016-01-01

    The Ammonoidea is a group of extinct cephalopods ideal to study evolution through deep time. The evolution of the planispiral shell and complexly folded septa in ammonoids has been thought to have increased the functional surface area of the chambers permitting enhanced metabolic functions such as: chamber emptying, rate of mineralization and increased growth rates throughout ontogeny. Using nano-computed tomography and synchrotron radiation based micro-computed tomography, we present the first study of ontogenetic changes in surface area to volume ratios in the phragmocone chambers of several phylogenetically distant ammonoids and extant cephalopods. Contrary to the initial hypothesis, ammonoids do not possess a persistently high relative chamber surface area. Instead, the functional surface area of the chambers is higher in earliest ontogeny when compared to Spirula spirula. The higher the functional surface area the quicker the potential emptying rate of the chamber; quicker chamber emptying rates would theoretically permit faster growth. This is supported by the persistently higher siphuncular surface area to chamber volume ratio we collected for the ammonite Amauroceras sp. compared to either S. spirula or nautilids. We demonstrate that the curvature of the surface of the chamber increases with greater septal complexity increasing the potential refilling rates. We further show a unique relationship between ammonoid chamber shape and size that does not exist in S. spirula or nautilids. This view of chamber function also has implications for the evolution of the internal shell of coleoids, relating this event to the decoupling of soft-body growth and shell growth.

  8. Liquid rocket combustion chamber acoustic characterization

    Directory of Open Access Journals (Sweden)

    Cândido Magno de Souza

    2010-09-01

    Full Text Available Over the last 40 years, many solid and liquid rocket motors have experienced combustion instabilities. Among other causes, there is the interaction of acoustic modes with the combustion and/or fluid dynamic processes inside the combustion chamber. Studies have been showing that, even if less than 1% of the available energy is diverted to an acoustic mode, combustion instability can be generated. On one hand, this instability can lead to ballistic pressure changes, couple with other propulsion systems such as guidance or thrust vector control, and in the worst case, cause motor structural failure. In this case, measures, applying acoustic techniques, must be taken to correct/minimize these influences on the combustion. The combustion chamber acoustic behavior in operating conditions can be estimated by considering its behavior in room conditions. In this way, acoustic tests can be easily performed, thus identifying the cavity modes. This paper describes the procedures to characterize the acoustic behavior in the inner cavity of four different configurations of a combustion chamber. Simple analytical models are used to calculate the acoustic resonance frequencies and these results are compared with acoustic natural frequencies measured at room conditions. Some comments about the measurement procedures are done, as well as the next steps for the continuity of this research. The analytical and experimental procedures results showed good agreement. However, limitations on high frequency band as well as in the identification of specific kinds of modes indicate that numerical methods able to model the real cavity geometry and an acoustic experimental modal analysis may be necessary for a more complete analysis. Future works shall also consider the presence of passive acoustic devices such as baffles and resonators capable of introducing damping and avoiding or limiting acoustic instabilities.

  9. Dynamic consideration of smog chamber experiments

    Directory of Open Access Journals (Sweden)

    W. K. Chuang

    2017-08-01

    Full Text Available Recent studies of the α-pinene + ozone reaction that address particle nucleation show relatively high molar yields of highly oxidized multifunctional organic molecules with very low saturation concentrations that can form and grow new particles on their own. However, numerous smog-chamber experiments addressing secondary organic aerosol (SOA mass yields, interpreted via equilibrium partitioning theory, suggest that the vast majority of SOA from α-pinene is semivolatile. We explore this paradox by employing a dynamic volatility basis set (VBS model that reproduces the new-particle growth rates observed in the CLOUD experiment at CERN and then modeling SOA mass yield experiments conducted at Carnegie Mellon University (CMU. We find that the base-case simulations do overpredict observed SOA mass but by much less than an equilibrium analysis would suggest; this is because delayed condensation of vapors suppresses the apparent mass yields early in the chamber experiments. We further find that a second VBS model featuring substantial oligomerization of semivolatile monomers can match the CLOUD growth rates with substantially lower SOA mass yields; this is because the lighter monomers have a higher velocity and thus a higher condensation rate for a given mass concentration. The oligomerization simulations are a closer match to the CMU experiments than the base-case simulations, though they overpredict the observations somewhat. However, we also find that if the chemical conditions in CLOUD and the CMU chamber were identical, substantial nucleation would have occurred in the CMU experiments when in fact none occurred. This suggests that the chemical mechanisms differed in the two experiments, perhaps because the high oxidation rates in the SOA formation experiments led to rapid termination of peroxy radical chemistry.

  10. Finite Element Analysis of Reverberation Chambers

    Science.gov (United States)

    Bunting, Charles F.; Nguyen, Duc T.

    2000-01-01

    The primary motivating factor behind the initiation of this work was to provide a deterministic means of establishing the validity of the statistical methods that are recommended for the determination of fields that interact in -an avionics system. The application of finite element analysis to reverberation chambers is the initial step required to establish a reasonable course of inquiry in this particularly data-intensive study. The use of computational electromagnetics provides a high degree of control of the "experimental" parameters that can be utilized in a simulation of reverberating structures. As the work evolved there were four primary focus areas they are: 1. The eigenvalue problem for the source free problem. 2. The development of a complex efficient eigensolver. 3. The application of a source for the TE and TM fields for statistical characterization. 4. The examination of shielding effectiveness in a reverberating environment. One early purpose of this work was to establish the utility of finite element techniques in the development of an extended low frequency statistical model for reverberation phenomena. By employing finite element techniques, structures of arbitrary complexity can be analyzed due to the use of triangular shape functions in the spatial discretization. The effects of both frequency stirring and mechanical stirring are presented. It is suggested that for the low frequency operation the typical tuner size is inadequate to provide a sufficiently random field and that frequency stirring should be used. The results of the finite element analysis of the reverberation chamber illustrate io-W the potential utility of a 2D representation for enhancing the basic statistical characteristics of the chamber when operating in a low frequency regime. The basic field statistics are verified for frequency stirring over a wide range of frequencies. Mechanical stirring is shown to provide an effective frequency deviation.

  11. Golden Jubilee photos: The first CERN bubble chamber

    CERN Multimedia

    2004-01-01

    In the 1950s and 1960s, bubble and spark chambers were the dominant experimental tools in high-energy physics. While spark chambers were usually built and fitted to specific experiments, bubble chambers were constructed as general purpose devices that could be used for a variety of experiments. At CERN, the bubble chamber programme started under Charles Peyrou in the late 1950s. The first of CERN's bubble chambers, a 30 cm hydrogen chamber, is seen here being inserted into its vacuum tank. The HBC30, as it was called, took its first beam from the SC in 1959. One of the first pictures taken, of a positive pion-proton interaction, began a long series of pretty images for which bubble chambers would become famous. When it stopped operating in spring 1962, the HBC30 had consumed 150 km of film in its 3 years of operation.

  12. A new ring-shaped graphite monitor ionization chamber

    Science.gov (United States)

    Yoshizumi, M. T.; Caldas, L. V. E.

    2010-07-01

    A ring-shaped monitor ionization chamber was developed at the Instituto de Pesquisas Energéticas e Nucleares. This ionization chamber presents an entrance window of aluminized polyester foil. The guard ring and collecting electrode are made of graphite coated Lucite plates. The main difference between this new ionization chamber and commercial monitor chambers is its ring-shaped design. The new monitor chamber has a central hole, allowing the passage of the direct radiation beam without attenuation; only the penumbra radiation is measured by the sensitive volume. This kind of ionization chamber design has already been tested, but using aluminium electrodes. By changing the electrode material from aluminium to a graphite coating, an improvement in the chamber response stability was expected. The pre-operational tests, as saturation curve, recombination loss and polarity effect showed satisfactory results. The repeatability and the long-term stability tests were also evaluated, showing good agreement with international recommendations.

  13. Design and commissioning of a semi-confined blast chamber

    Institute of Scientific and Technical Information of China (English)

    I.M. SNYMAN; F.J. MOSTERT; W. GRUNDLING

    2016-01-01

    This paper presents the design, test and analysis of a scaled cylindrical blast chamber. The blast chamber is a one-fifth dimensional size replica of the full-scale blast chamber (Emily). The blast chamber is semi-confined as one end is open. The scaled blast chamber is used to test concepts for closing the open end and allows the gas to vent at the same time. ANSYS AUTODYN calculated the pressure time histories for different closure scenarios. Comparing the results suggested a viable scenario, namely a structure consisting of a circular disc and a frame positioned at the open end of the blast chamber. The structure and cylindrical blast chamber were subjected to scaled blast tests and the pressure results are presented and discussed.

  14. Smart ionization chamber for gamma-ray monitoring

    Directory of Open Access Journals (Sweden)

    Drndarević Vujo R.

    2014-01-01

    Full Text Available A design and implementation of a smart ionization chamber suitable for connection into gamma radiation monitoring networks is presented in this paper. The smart ionization chamber consists of air-equivalent one liter ionization chamber with associated electronics and a built-in memory for storage of electronic data specifications. Generally, operating and measurement characteristics of the used ionization chamber are written into the memory chip attached to the chamber. A microcontroller-based data acquisition system with a mixed-mode interface has been implemented for the purpose of reading electronic data specifications from the memory chip, and for configuration and interfacing of the ionization chamber to the monitoring network using plug-and-play concept. The details of smart ionization chamber implementation and test results are included in the paper. [Projekat Ministarstva nauke Republike Srbije, br. TR36047 i br. TR32043

  15. A new ring-shaped graphite monitor ionization chamber

    Energy Technology Data Exchange (ETDEWEB)

    Yoshizumi, M.T., E-mail: mairaty@ipen.b [Instituto de Pesquisas Energeticas e Nucleares IPEN - CNEN/SP, Av. Prof. Lineu Prestes 2242, 05508-000, Sao Paulo-SP (Brazil); Caldas, L.V.E., E-mail: lcaldas@ipen.b [Instituto de Pesquisas Energeticas e Nucleares IPEN - CNEN/SP, Av. Prof. Lineu Prestes 2242, 05508-000, Sao Paulo-SP (Brazil)

    2010-07-21

    A ring-shaped monitor ionization chamber was developed at the Instituto de Pesquisas Energeticas e Nucleares. This ionization chamber presents an entrance window of aluminized polyester foil. The guard ring and collecting electrode are made of graphite coated Lucite plates. The main difference between this new ionization chamber and commercial monitor chambers is its ring-shaped design. The new monitor chamber has a central hole, allowing the passage of the direct radiation beam without attenuation; only the penumbra radiation is measured by the sensitive volume. This kind of ionization chamber design has already been tested, but using aluminium electrodes. By changing the electrode material from aluminium to a graphite coating, an improvement in the chamber response stability was expected. The pre-operational tests, as saturation curve, recombination loss and polarity effect showed satisfactory results. The repeatability and the long-term stability tests were also evaluated, showing good agreement with international recommendations.

  16. Investigating ion recombination effects in a liquid-filled ionization chamber array used for IMRT QA measurements.

    Science.gov (United States)

    Knill, Cory; Snyder, Michael; Rakowski, Joseph T; Zhuang, Ling; Matuszak, Martha; Burmeister, Jay

    2016-05-01

    PTW's Octavius 1000 SRS array performs IMRT quality assurance (QA) measurements with liquid-filled ionization chambers (LICs) to allow closer detector spacing and higher resolution, compared to air-filled QA devices. However, reduced ion mobility in LICs relative to air leads to increased ion recombination effects and reduced collection efficiencies that are dependent on Linac pulse frequency and pulse dose. These pulse parameters are variable during an IMRT delivery, which affects QA results. In this study, (1) 1000 SRS collection efficiencies were measured as a function of pulse frequency and pulse dose, (2) two methods were developed to correct changes in collection efficiencies during IMRT QA measurements, and the effects of these corrections on QA pass rates were compared. To obtain collection efficiencies, the OCTAVIUS 1000 SRS was used to measure open fields of varying pulse frequency, pulse dose, and beam energy with results normalized to air-filled chamber measurements. Changes in ratios of 1000 SRS to chamber measured dose were attributed to changing collection efficiencies, which were then correlated to pulse parameters using regression analysis. The usefulness of the derived corrections was then evaluated using 6 MV and 10FFF SBRT RapidArc plans delivered to the OCTAVIUS 4D system using a TrueBeam (Varian Medical Systems) linear accelerator equipped with a high definition multileaf collimator. For the first correction, matlab software was developed that calculates pulse frequency and pulse dose for each detector, using measurement and DICOM RT Plan files. Pulse information is converted to collection efficiency, and measurements are corrected by multiplying detector dose by ratios of calibration to measured collection efficiencies. For the second correction the MU/min in the daily 1000 SRS calibration was chosen to match the average MU/min of the volumetric modulated arc therapy plan. Effects of the two corrections on QA results were examined by

  17. THE PRE-TRIAL CHAMBER JUDGE

    Directory of Open Access Journals (Sweden)

    Edgar Laurentiu DUMBRAVA

    2014-12-01

    Full Text Available The importance of this work lies in important changes in the new Code of Criminal Procedure, amendments justified by the new realities of a democratic society in which criminal procedural rules must be adapted according to the daily realities in the achievement of justice. The purpose of the paper is given by the need of approaching at a theoretically level the institution of The Pre-Trial Chamber Judge, given that so far there have not been developed any works on the subject. This paper addresses both practitioners and litigants.

  18. THE PRE-TRIAL CHAMBER JUDGE

    Directory of Open Access Journals (Sweden)

    Edgar Laurenţiu DUMBRAVĂ

    2014-05-01

    Full Text Available The importance of this work lies in important changes in the new Code of Criminal Procedure, amendments justified by the new realities of a democratic society in which criminal procedural rules must be adapted according to the daily realities in the achievement of justice. The purpose of the paper is given by the need of approaching at a theoretically level the institution of The Pre-Trial Chamber Judge, given that so far there have not been developed any works on the subject. This paper addresses both practitioners and litigants.

  19. Drift Chamber Alignment using Cosmic Rays

    Energy Technology Data Exchange (ETDEWEB)

    Kotwal, Ashutosh V. [Duke U.; Hays, Christopher P. [Oxford U.

    2014-05-07

    The Collider Detector at Fermilab (CDF) is a general-purpose experimental apparatus with an inner tracking detector for measuring charged particles, surrounded by a calorimeter for measurements of electromagnetic and hadronic showers, and a muon detector system. We present a technique for, and results of, a precise relative alignment of the drift chamber wires of the CDF tracker. This alignment has been an important component of the track momentum calibration, which is the basis for the charged-lepton calibration for the measurement of the W boson mass at CDF.

  20. Simulation of the CMS Resistive Plate Chambers

    CERN Document Server

    Hadjiiska, R; Pavlov, B; Petkov, P; Dimitrov, A; Beernaert, K; Cimmino, A; Costantini, S; Garcia, G; Lellouch, J; Marinov, A; Ocampo, A; Strobbe, N; Thyssen, F; Tytgat, M; Verwilligen, P; Yazgan, E; Zaganidis, N; Aleksandrov, A; Genchev, V; Iaydjiev, P; Rodozov, M; Shopova, M; Sultanov, G; Ban, Y; Cai, J; Xue, Z; Ge, Y; Li, Q; Qian, S; Avila, C; Chaparro, L F; Gomez, J P; Moreno, B Gomez; Oliveros, A F Osorio; Sanabria, J C; Assran, Y; Sharma, A; Abbrescia, M; Colaleo, A; Pugliese, G; Loddo, F; Calabria, C; Maggi, M; Benussi, L; Bianco, S; Colafranceschi, S; Piccolo, D; Carrillo, C; Iorio, O; Buontempo, S; Paolucci, P; Vitulo, P; Berzano, U; Gabusi, M; Kang, M; Lee, K S; Park, S K; Shin, S; Kim, M S; Seo, H; Goh, J; Choi, Y; Shoaib, M

    2013-01-01

    The Resistive Plate Chamber (RPC) muon subsystem contributes significantly to the formation of the trigger decision and reconstruction of the muon trajectory parameters. Simulation of the RPC response is a crucial part of the entire CMS Monte Carlo software and directly influences the final physical results. An algorithm based on the parametrization of RPC efficiency, noise, cluster size and timing for every strip has been developed. Experimental data obtained from cosmic and proton-proton collisions at $\\sqrt{s}=7$ TeV have been used for determination of the parameters. A dedicated validation procedure has been developed. A good agreement between the simulated and experimental data has been achieved.

  1. Drift Chamber Alignment using Cosmic Rays

    CERN Document Server

    Kotwal, Ashutosh V

    2014-01-01

    The Collider Detector at Fermilab (CDF) is a general-purpose experimental apparatus with an inner tracking detector for measuring charged particles, surrounded by a calorimeter for measurements of electromagnetic and hadronic showers, and a muon detector system. We present a technique for, and results of, a precise relative alignment of the drift chamber wires of the CDF tracker. This alignment has been an important component of the track momentum calibration, which is the basis for the charged-lepton calibration for the measurement of the W boson mass at CDF.

  2. Chamber service module (CSM1) for MDT

    CERN Document Server

    Binchi, P

    2002-01-01

    CSM-1 is the second and latest version of the high speed electronic unit whose primary task is to multiplex serial data from up to 18 ASD /TDC cards located at the ends of the Monitored Drift Tubes. Each CSM will capture data from all 24 channel TDC (AMT-2 units) of a given chamber and transfer it along a single optic fiber to the MROD, the event builder and readout driver. The core of the board is a Xilinx VirtexII FPGA which will use JTAG protocol (IEEE Std. 1149.1) for logic configuration parameter loading.

  3. Ionization Chamber for Prompt Fission Neutron Investigations

    OpenAIRE

    ZEYNALOV Sh.; ZEYNALOVA O. V.; Hambsch, Franz-Josef; Sedyshev, P.; SHVETSOV V.

    2014-01-01

    In this work we report recent achievements in design of twin back-to-back ionization chamber (TIC) for fission fragment (FF) mass and kinetic energy measurement. Correlated FF kinetic energies, their masses and the angle of FF in respect to the axes in 3D Cartesian coordinates can be determined from analysis of the heights and shapes of the pulses induced by the fission fragments on the anodes of TIC. Anodes of TIC were designed as consisting of isolated strips each having independent electro...

  4. Distribución espacial y temporal del cangrejo Callinectes sapidus (Decapoda: Portunidae en la Bahía de Chetumal, Quintana Roo, México

    Directory of Open Access Journals (Sweden)

    Héctor J Ortiz-León

    2007-03-01

    sapidus (Decapoda: Portunidae in Chetumal Bay, Quintana Roo, Mexico. In order to determine temporal and spatial distribution patterns of Callinectes sapidus, samplings were carried out during the cold-front (January-February, dry (May-June and rainy (August-September, 2002 climatic seasons, in 30 sampling stations of Chetumal Bay, grouped in sectors A (14 stations, B (eight stations and C (eight stations. In each sampling station crabs were collected from two transects parallel to the coast, each with three traps, separated by 30 m. Sediments were calcareous coarse and medium sand, white or lightly gray. A total of 1 031 specimens were collected. CPEU (Capture Per Effort Unit differed spatially and temporally. Highest CPEU was found in sector C with 1.3 ind∙trap-1, and in the rainy season with 1.1 ind∙trap-1. Population was predominantly composed of male individuals. The male:female ratio was 15:1. Males and adults (group II CPEU was significant different between sectors and climatic seasons. Both males and adults (group II had a greater CPEU in sector C (1.2 ind∙trap-1 and in the rainy season (1.1 ind∙trap-1. Abundance of female and juvenile individuals (group I was low during the sampling period whereas group 0 juvenile individuals were not found. A greater relative frequency between sectors and climatic seasons were observed in 130-139 mm and 140-149 mm size interval (CW. C. sapidus occurred on sandy sediments in Chetumal Bay. Pearson product moment correlations exhibited significant relationships between CPEU and temperature, salinity and dissolved oxygen. In Chetumal Bay, the spatial and temporal distribution of C. sapidus can be related to salinity, temperature, habitat quality, food availability, recruitment and reproduction events of individuals. Rev. Biol. Trop. 55 (1: 235-245. Epub 2007 March. 31.

  5. BEBC, the Big European Bubble Chamber

    CERN Multimedia

    CERN PhotoLab

    1971-01-01

    The vessel of the Big European Bubble Chamber, BEBC, was installed at the beginning of the 1970s. The large stainless-steel vessel, measuring 3.7 metres in diameter and 4 metres in height, was filled with 35 cubic metres of liquid (hydrogen, deuterium or a neon-hydrogen mixture), whose sensitivity was regulated by means of a huge piston weighing 2 tonnes. During each expansion, the trajectories of the charged particles were marked by a trail of bubbles, where liquid reached boiling point as they passed through it. The first images were recorded in 1973 when BEBC, equipped with the largest superconducting magnet in service at the time, first received beam from the PS. In 1977, the bubble chamber was exposed to neutrino and hadron beams at higher energies of up to 450 GeV after the SPS came into operation. By the end of its active life in 1984, BEBC had delivered a total of 6.3 million photographs to 22 experiments devoted to neutrino or hadron physics. Around 600 scientists from some fifty laboratories through...

  6. Adhesive sealing of the pulp chamber.

    Science.gov (United States)

    Belli, S; Zhang, Y; Pereira, P N; Pashley, D H

    2001-08-01

    The purpose of this in vitro study was to evaluate quantitatively the ability of four different filling materials to seal the orifices of root canals as a secondary seal after root canal therapy. Forty extracted human molar teeth were used. The top of pulp chambers and distal halves of the roots were removed using an Isomet saw. The canal orifices were temporarily sealed with a gutta-percha master cone without sealer. The pulp chambers were then treated with a self-etching primer adhesive system (Clearfil SE Bond), a wet bonding system (One-Step), a 4-methacryloyloxyethyl trimellitate anhydride adhesive system (C&B Metabond), or a reinforced zinc oxide-eugenol (IRM). The specimens were randomly divided into four groups of 10 each. A fluid filtration method was used for quantitative evaluation of leakage. Measurements of fluid movement were made at 2-min intervals for 8 min. The quality of the seal of each specimen was measured by fluid filtration immediately and after 1 day, 1 wk, and 1 month. Even after 1 month the resins showed an excellent seal. Zinc oxide-eugenol had significantly more leakage when compared with the resin systems (p < 0.05). Adhesive resins should be considered as a secondary seal to prevent intraorifice microleakage.

  7. LET measurements with a liquid ionization chamber

    Energy Technology Data Exchange (ETDEWEB)

    Tegami, Sara

    2013-02-08

    Deep-seated tumors can be efficiently treated with heavy charged particles. The characteristic depth dose profile inside the tissue (Bragg peak) allows to deliver a high dose inside the tumor, while sparing the neighboring healthy tissue. As compared to protons, heavy ions like carbon or oxygen produce a higher amount of ionization events along their track (and in particular at the end of the ion beam path), resulting in an irreparable damage to the DNA of the tumor cells. The density of such ionization events is described in terms of Linear Energy Transfer (LET), an important physical quantity, but difficult to be measured directly. The aim of this work is to determine LET of hadrontherapy beams by using Liquid Ionization Chambers (LIC). The ionization signal in LICs is affected by recombination effects that depend on the LET of the incident radiation. Differences in recombination effects in LICs and air-filled ionization chambers can be exploited to obtain the recombination index, which can be related to the LET, calculated by Monte Carlo methods. We thus developed a method to construct a calibration curve, which relates the recombination index with the LET at each depth in water. The result of this work can be used for online monitoring of the ion beam quality.

  8. Suppressing drift chamber diffusion without magnetic field

    CERN Document Server

    Martoff, C J; Ohnuki, T; Spooner, N J C; Lehner, M

    2000-01-01

    The spatial resolution in drift chamber detectors for ionizing radiation is limited by diffusion of the primary electrons. A strong magnetic field along the drift direction is often applied (Fancher et al., Nucl. Instr. and Meth. A 161 (1979) 383) because it suppresses the transverse diffusion, improving the resolution but at considerable increase in cost and complexity. Here we show that transverse track diffusion can be strongly suppressed without any magnetic field. This is achieved by using a gas additive which reversibly captures primary ionization electrons, forming negative ions. The ions drift with thermal energies even at very high drift fields and low pressures (E/P=28.5 V/cm torr), and the diffusion decreases with increasing drift field. Upon arrival at the avalanche region of the chamber the negative ions are efficiently stripped and ordinary avalanche gain is obtained. Using this technique, r.m.s. transverse diffusion less than 200 mu m has been achieved over a 15 cm drift path at 40 torr with ze...

  9. COLDDIAG: A Cold Vacuum Chamber for Diagnostics

    CERN Document Server

    Casalbuoni, S; Gerstl, S; Grau, A W; Hagelstein, M; Saez de Jauregui, D; Boffo, C; Sikler, G; Baglin, V; Cox, M P; Schouten, J C; Cimino, R; Commisso, M; Spataro, B; Mostacci, A; Wallen, E J; Weigel, R; Clarke, J; Scott, D; Bradshaw, T; Jones, R; Shinton, I

    2011-01-01

    One of the still open issues for the development of superconducting insertion devices is the understanding of the beam heat load. With the aim of measuring the beam heat load to a cold bore and the hope to gain a deeper understanding in the beam heat load mechanisms, a cold vacuum chamber for diagnostics is under construction. The following diagnostics will be implemented: i) retarding field analyzers to measure the electron energy and flux, ii) temperature sensors to measure the total heat load, iii) pressure gauges, iv) and mass spectrometers to measure the gas content. The inner vacuum chamber will be removable in order to test different geometries and materials. This will allow the installation of the cryostat in different synchrotron light sources. COLDDIAG will be built to fit in a short straight section at ANKA. A first installation at the synchrotron light source Diamond is foreseen in June 2011. Here we describe the technical design report of this device and the planned measurements with beam.

  10. Effect of averaged of the matrix 2D of ionization chambers and correction in the verification of IMRT plans; Efecto de promediado de matrices 2D de camaras de ionizacion y correccion en la verificacion de planes de IMRT

    Energy Technology Data Exchange (ETDEWEB)

    Pino Leon, C.; Iriondo Igerabide, U.; Lozano FGlores, F. J.; Puertolas Hernandez, J. R.; Larretxea Etxarri, R.

    2013-07-01

    In this work in addition to measuring the camera response of our detector (PTW seven29) applies correction to different cases of IMRT ENT and prostate and will assess the effect of convolutioner the dose of TPS. (Author)

  11. SU-D-BRE-04: Evaluating the Dose Accuracy of a 2D Ion Chamber Array in High Dose Rate Pencil Beam Scanning Proton Beam

    Energy Technology Data Exchange (ETDEWEB)

    Perles, L; Mascia, A; Piskulich, F; Lepage, R; Zhang, Y; Giebeler, A; Dong, L [Scripps Proton Therapy Center, San Diego, CA (United States)

    2014-06-01

    Purpose: To evaluate the absolute dose accuracy of the PTW Octavius 729 XDR 2D ion chamber array at a high dose rate pencil beam scanning proton therapy facility. Methods: A set of 18 plans were created in our treatment planning system, each of which comprising a unique combination of field sizes (FS), length of spread out of Bragg peaks (SOBP) and depths. The parameters used were: FS of 5×5cm{sup 2}, 10×10cm{sup 2} and 15×15cm{sup 2}; flat SOBP of 5cm and 10cm; and isocenter depths of 10cm, 15cm and 20cm, which coincides with the center of the SOBP. The 2D array detector was positioned at the machine isocenter and the appropriate amount of solid water was used to match the planned depths of 10, 15 and 20 cm water equivalent depth. Subsequently, we measured the absolute dose at isocenter using a CC04 ion chamber in a 1D water tank. Both 2D array and CC04 were previously cross calibrated. We also collected the MU rates used by our proton machine from the log files. Results: The relative differences between the CC04 and the 2D array can be summarized into two groups, one with 5 cm SOBP and another with 10 cm SOBP. Plotting these datasets against FS shows that the 2D array response for high dose rate fields (FS of 5×5cm{sup 2} and 5cm SOBP) can be up to 2% lower. Similarly, plotting them against isocenter depths reveals the detector's response can be up to 2% lower for higher energy beams (about 200MeV nominal). The MU rate found in the machine log files for 5cm SOBP's were as high as twice the MU rate for the 10cm SOBP. Conclusion: The 2D array dose response showed a dose rate effect in scanning pencil beam delivery, which needs to be corrected to achieve a better dose accuracy.

  12. Preliminary studies of a new monitor ionization chamber.

    Science.gov (United States)

    Yoshizumi, Maíra T; Vivolo, Vitor; Caldas, Linda V E

    2010-01-01

    A new monitor ionization chamber was developed at Instituto de Pesquisas Energéticas e Nucleares (IPEN) in order to monitor X-ray beams. The main difference of this monitor ionization chamber in relation to other monitor chambers is its geometry, which consists of a ring-shaped sensitive volume. Because of this geometry, the monitor chamber has a central hole through which the direct radiation beam passes. The operational characteristics of the monitor chamber were evaluated: saturation, ion collection efficiency and polarity effect. Besides these tests, the short- and medium-term stabilities of its response were also evaluated. During the tests the leakage current was always negligible. All results showed values within those recommended internationally (IEC, 1997. Medical electrical equipment-dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnostic imaging. IEC 61674. International Electrotechnical Commission, Genève). Copyright 2009 Elsevier Ltd. All rights reserved.

  13. PERIODIC DYADIC GREEN'S FUNCTION FOR FIELD ANALYSIS IN EMC CHAMBER

    Institute of Scientific and Technical Information of China (English)

    Lv Feiyan; Ding Jianjin; Sha Fei

    2006-01-01

    Herein a novel Dyadic Green's Function (DGF) is presented to calculate the field in ElectroMagnetic Compatibility (EMC) chamber. Due to the difficulty of simulating the whole chamber environment, the analysis combines the DGF formulation and the FEM method, with the latter deals with the reflection from absorbers. With DGF formulation for infinite periodic array structures, this paper investigates electromagnetic field in chamber with truncated arrays. The reflection from the absorber serves as the virtual source contributing to the total field. Hence the whole chamber field calculation can be separated from the work of absorber model set-up. Practically the field homogeneity test and Normal Site Attenuation (NSA) test are carried out to evaluate the chamber performance. Based on the method in this paper, the simulation results agree well with the test, and predict successfully the victim frequency points of the chamber.

  14. Characterization of a homemade ionization chamber for radiotherapy beams

    Energy Technology Data Exchange (ETDEWEB)

    Neves, Lucio P., E-mail: lpneves@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP), Comissao Nacional de Energia Nuclear, Av. Prof. Lineu Prestes 2242, 05508-000 Sao Paulo (Brazil); Perini, Ana P., E-mail: aperini@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP), Comissao Nacional de Energia Nuclear, Av. Prof. Lineu Prestes 2242, 05508-000 Sao Paulo (Brazil); Santos, Gelson P. dos, E-mail: gpsantos@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP), Comissao Nacional de Energia Nuclear, Av. Prof. Lineu Prestes 2242, 05508-000 Sao Paulo (Brazil); Xavier, Marcos, E-mail: mxavier@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP), Comissao Nacional de Energia Nuclear, Av. Prof. Lineu Prestes 2242, 05508-000 Sao Paulo (Brazil); Khoury, Helen J., E-mail: khoury@ufpe.br [Universidade Federal de Pernambuco, Departamento de Energia Nuclear, Av. Prof. Luiz Freire 1000, 50740-540 Recife (Brazil); Caldas, Linda V.E., E-mail: lcaldas@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP), Comissao Nacional de Energia Nuclear, Av. Prof. Lineu Prestes 2242, 05508-000 Sao Paulo (Brazil)

    2012-07-15

    A homemade cylindrical ionization chamber was studied for routine use in therapy beams of {sup 60}Co and X-rays. Several characterization tests were performed: leakage current, saturation, ion collection efficiency, polarity effect, stability, stabilization time, chamber orientation and energy dependence. All results obtained were within international recommendations. Therefore the homemade ionization chamber presents usefulness for routine dosimetric procedures in radiotherapy beams. - Highlights: Black-Right-Pointing-Pointer A homemade ionization chamber was studied for routine use in radiotherapy. Black-Right-Pointing-Pointer Several characterization tests were performed and the results were satisfactory. Black-Right-Pointing-Pointer This chamber was compared to commercial ones and the results were similar. Black-Right-Pointing-Pointer This chamber is suitable for calibration procedures in {sup 60}Co beams.

  15. Emulsion chamber experiments; critical comments and future prospects

    Energy Technology Data Exchange (ETDEWEB)

    Tamada, M. [School of Science and Engineering, Kinki University, Higashi-Osaka, Osaka 577-8502 (Japan)

    2006-01-15

    Emulsion chamber data give valuable information about particle production in the forward region of very high-energy nuclear interactions. Many characteristics of high-energy atmospheric families, observed by emulsion chambers, have not been fully described by simulations employing existing nuclear interaction models. Some of the events and the phenomena observed in emulsion chamber experiments have been considered to be unusual and new, never seen in lower energy accelerator experiments. We re-examine emulsion chamber data critically in order to get unbiased views of these unusual events and phenomena. It is shown that some of the previous interpretations need to be changed. We take up for the discussions scaling violation in C-jets, Centauro events, alignment of showers in high-energy families, hadrons of anomalous absorption in thick lead chambers. We will also discuss the results on the hybrid experiments of emulsion chamber and EAS-array.

  16. Progress in timing Resistive Plate Chambers

    Energy Technology Data Exchange (ETDEWEB)

    Blanco, A. [Laboratorio de Instrumentacao e Fisica Experimental de Particulas (LIP), Universidade de Coimbra, Dep. de Fisica, 3004-516 Coimbra (Portugal); Carolino, N. [Laboratorio de Instrumentacao e Fisica Experimental de Particulas (LIP), Universidade de Coimbra, Dep. de Fisica, 3004-516 Coimbra (Portugal); Correia, C.M.B.A. [Laboratorio de Instrumentacao e Fisica Experimental de Particulas (LIP), Universidade de Coimbra, Dep. de Fisica, 3004-516 Coimbra (Portugal)] [and others

    2004-12-11

    Timing RPCs are Resistive Plate Chambers made with glass and metal electrodes separated by precision spacers. Typical gas gaps are a few hundred micrometers wide. Such counters were introduced in 1999 and have since reached timing accuracies below 50ps {sigma} with efficiencies above 99% for MIPs. Applications in high-energy physics have already taken place with several more under study.Some recent developments include the extension of the counting rate capability by over one order of magnitude, to 25kHz/cm2, with time resolutions below 100ps {sigma}. A prototype RPC-based Positron Emission Tomograph yielded a reconstructed point-source resolution of 0.6 mm FWHM and a modified timing RPC design, featuring 50{mu}m pitch anode strips, allowed to reach extremely good position resolution for hard X-rays in digital readout mode.An analytically solvable model has allowed us to clarify the basic factors influencing the time resolution.

  17. Bubble Chambers for Experiments in Nuclear Astrophysics

    CERN Document Server

    DiGiovine, B; Holt, R J; Rehm, K E; Raut, R; Robinson, A; Sonnenschein, A; Rusev, G; Tonchev, A P; Ugalde, C

    2015-01-01

    A bubble chamber has been developed to be used as an active target system for low energy nuclear astrophysics experiments. Adopting ideas from dark matter detection with superheated liquids, a detector system compatible with gamma-ray beams has been developed. This detector alleviates some of the limitations encountered in standard measurements of the minute cross sections of interest to stellar environments. While the astrophysically relevant nuclear reaction processes at hydrostatic burning temperatures are dominated by radiative captures, in this experimental scheme we measure the time-reversed processes. Such photodisintegrations allow us to compute the radiative capture cross sections when transitions to excited states of the reaction products are negligible. Due to the transformation of phase space, the photodisintegration cross sections are up to two orders of magnitude higher. The main advantage of the new target-detector system is a density several orders of magnitude higher than conventional gas tar...

  18. RETAINED STONE PIECE IN ANTERIOR CHAMBER

    Directory of Open Access Journals (Sweden)

    ZvornicaninJasmin, Nadarevic-VodencarevicAmra

    2015-04-01

    Full Text Available ABSTRACT We read with interest the article by Surekha et al. regarding the retained stone piece in anterior chamber. Similar to the results of previous studies, the authors found that delayed intraocular foreign body (IOFB management can result in good visual outcome without an apparent increased risk of endophthalmitis or other deleterious side effects. However, the authors failed to explain the exact reason for the diminution of vision in patients left eye. It is unclear what the uncorrected visual acuity was and what kind of correction was used, more precisely type and amount of cylinder, given the presence of the corneal opacity. Since the size of the IOFB is approximately 4x4x1mm, significant irido-corneal angle changes resulting in intraocular pressure raise and optic nerve head damage can be expected. Traumatic glaucoma following open globe injury can occur in 2.7 to 19% of cases, with several risk factors associated with glaucoma development (advanced age, poor visual acuity at presentation,perforating rather than penetrating ocular injury,lens injury, presence of vitreous hemorrhage and presence of an IOFB. Earlier reportsof latetraumaticoptic neuropathy onset, even after several years, indicate that this possibility cannot be completely ruled out too. Therefore, repeated intraocular pressure measurements, gonioscopy, pupillary reaction assessment, together with through posterior segment examination including visual field and optical coherence tomography examinations can be useful in determining the possible optic nerve damage as one of the possible reasons for visual acuity reduction. The authors did not suggest any operative treatment at this time. However, it should bear in mind that the inert anterior chamber IOFB could be a risk factor for non-infectious endophthalmitis development even after many years. Also, long term retained anterior chamber foreign body leads to permanent endothelial cell loss and can even result in a corneal

  19. Nuclear Fission Investigation with Twin Ionization Chamber

    Science.gov (United States)

    Zeynalova, O.; Zeynalov, Sh.; Nazarenko, M.; Hambsch, F.-J.; Oberstedt, S.

    2011-11-01

    The purpose of the present paper was to report the recent results, obtained in development of digital pulse processing mathematics for prompt fission neutron (PFN) investigation using twin ionization chamber (TIC) along with fast neutron time-of-flight detector (ND). Due to well known ambiguities in literature (see refs. [4, 6, 9 and 11]), concerning a pulse induction on TIC electrodes by FF ionization, we first presented detailed mathematical analysis of fission fragment (FF) signal formation on TIC anode. The analysis was done using Ramo-Shockley theorem, which gives relation between charged particle motion between TIC electrodes and so called weighting potential. Weighting potential was calculated by direct numerical solution of Laplace equation (neglecting space charge) for the TIC geometry and ionization, caused by FF. Formulae for grid inefficiency (GI) correction and digital pulse processing algorithms for PFN time-of-flight measurements and pulse shape analysis are presented and discussed.

  20. Echo chambers in the age of misinformation

    CERN Document Server

    Del Vicario, Michela; Zollo, Fabiana; Petroni, Fabio; Scala, Antonio; Caldarelli, Guido; Stanley, H Eugene; Quattrociocchi, Walter

    2015-01-01

    The wide availability of user-provided content in online social media facilitates the aggregation of people around common interests, worldviews, and narratives. Despite the enthusiastic rhetoric on the part of some that this process generates "collective intelligence", the WWW also allows the rapid dissemination of unsubstantiated conspiracy theories that often elicite rapid, large, but naive social responses such as the recent case of Jade Helm 15 -- where a simple military exercise turned out to be perceived as the beginning of the civil war in the US. We study how Facebook users consume information related to two different kinds of narrative: scientific and conspiracy news. We find that although consumers of scientific and conspiracy stories present similar consumption patterns with respect to content, the sizes of the spreading cascades differ. Homogeneity appears to be the primary driver for the diffusion of contents, but each echo chamber has its own cascade dynamics. To mimic these dynamics, we introdu...