WorldWideScience

Sample records for pttc program conducting

  1. Assessing the Influence of the PTTC Principal's Competency in ICT on the Teachers' Integration of ICT in Teaching Science in PTTCs in Nyanza Region, Kenya

    Science.gov (United States)

    Omwenga, Ezekiel; Nyabero, Charles; Okioma, Lazarous

    2015-01-01

    The study was conducted to assess the influence of Primary Teacher Training College (PTTC) principal's competency in ICT on the teacher's integration of ICT in teaching science in PTTC's in Nyanza region in Kenya. The one research question and one research hypothesis guided the study. The population comprised of 21 principals and 159 tutors. Data…

  2. Conducting the Annual Program Review: A Guide.

    Science.gov (United States)

    Drake Univ., Des Moines, IA. Midwest Regional Resource Center.

    Designed to assist local education agencies (LEAs) in conducting annual program reviews, the handbook focuses on evaluating Individualized Education Programs (IEPs) for handicapped children. An annual review meeting guide discusses purposes and procedures of the review. The second section provides a background on the planning-evaluation process,…

  3. Conducting a SWOT Analysis for Program Improvement

    Science.gov (United States)

    Orr, Betsy

    2013-01-01

    A SWOT (strengths, weaknesses, opportunities, and threats) analysis of a teacher education program, or any program, can be the driving force for implementing change. A SWOT analysis is used to assist faculty in initiating meaningful change in a program and to use the data for program improvement. This tool is useful in any undergraduate or degree…

  4. Conducting Simulation Studies in the R Programming Environment.

    Science.gov (United States)

    Hallgren, Kevin A

    2013-10-12

    Simulation studies allow researchers to answer specific questions about data analysis, statistical power, and best-practices for obtaining accurate results in empirical research. Despite the benefits that simulation research can provide, many researchers are unfamiliar with available tools for conducting their own simulation studies. The use of simulation studies need not be restricted to researchers with advanced skills in statistics and computer programming, and such methods can be implemented by researchers with a variety of abilities and interests. The present paper provides an introduction to methods used for running simulation studies using the R statistical programming environment and is written for individuals with minimal experience running simulation studies or using R. The paper describes the rationale and benefits of using simulations and introduces R functions relevant for many simulation studies. Three examples illustrate different applications for simulation studies, including (a) the use of simulations to answer a novel question about statistical analysis, (b) the use of simulations to estimate statistical power, and (c) the use of simulations to obtain confidence intervals of parameter estimates through bootstrapping. Results and fully annotated syntax from these examples are provided.

  5. Conducting Simulation Studies in the R Programming Environment

    Directory of Open Access Journals (Sweden)

    Kevin A. Hallgren

    2013-10-01

    Full Text Available Simulation studies allow researchers to answer specific questions about data analysis, statistical power, and best-practices for obtainingaccurate results in empirical research. Despite the benefits that simulation research can provide, many researchers are unfamiliar with available tools for conducting their own simulation studies. The use of simulation studies need not be restricted toresearchers with advanced skills in statistics and computer programming, and such methods can be implemented by researchers with a variety of abilities and interests. The present paper provides an introduction to methods used for running simulationstudies using the R statistical programming environment and is written for individuals with minimal experience running simulation studies or using R. The paper describes the rationale and benefits of using simulations and introduces R functions relevant for many simulation studies. Three examples illustrate different applications for simulation studies, including (a the use of simulations to answer a novel question about statistical analysis, (b the use of simulations to estimate statistical power, and (c the use of simulations to obtain confidence intervals of parameter estimates throughbootstrapping. Results and fully annotated syntax from these examples are provided.

  6. 34 CFR 359.30 - How is peer review conducted under this program?

    Science.gov (United States)

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false How is peer review conducted under this program? 359.30 Section 359.30 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF...? § 359.30 How is peer review conducted under this program? Peer review is conducted under this program...

  7. 45 CFR 2554.2 - What kind of conduct will result in program fraud enforcement?

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false What kind of conduct will result in program fraud...) CORPORATION FOR NATIONAL AND COMMUNITY SERVICE PROGRAM FRAUD CIVIL REMEDIES ACT REGULATIONS Overview and Definitions § 2554.2 What kind of conduct will result in program fraud enforcement? (a) Any person who makes...

  8. Expendable Conductivity, Temperature, and Depth System (XCTD) development Program

    Science.gov (United States)

    1988-01-30

    States of America as represented Sby the Secretary of the Navy 3. Four electrode conductivity sensor for moored sensor chains. Robert 8. Sudar Edward...CHARACYCRIZAl ION 0N.$. Manning. 6. Dalton, and H.W. LanceStorr 2. APPARAIUS Solow is a diagram of the drop test apparatus at the MAVOCEANO facility (Fig. 1). The

  9. TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    1998-10-31

    In pursuing its mission of helping U.S. independent oil and gas producers make timely, informed technology decisions, the Petroleum Technology Transfer Council (PTTC) functions as a cohesive national organization that implements industry's directives through active regional programs. The role of the national headquarters (HQ) organization includes planning and managing the PTTC program, conducting nation-wide technology transfer activities, and implementing a comprehensive communications effort. PTTC relies on 10 Regional Lead Organizations (RLOs) as its main program delivery mechanism to industry. Through its regions, PTTC connects with independent oil and gas producers--through technology workshops, resources centers, websites, newsletters, and other outreach efforts. The organization effectively combines federal, state, and industry funding to achieve important goals for all of these sectors. This integrated funding base, combined with industry volunteers guiding PTTC's activities and the dedication of national and regional staff, are achieving notable results. PTTC is increasingly recognized as a critical resource for information and access to technologies, especially for smaller companies. This technical progress report summarizes PTTC's accomplishments during FY98, and its strategy for achieving further growth in the future.

  10. Conductive Education: A Functional Skills Program for Children with Cerebral Palsy

    Science.gov (United States)

    Bourke-Taylor, Helen; O'Shea, Roberta; Gaebler-Spira, Deborah

    2007-01-01

    Conductive education (CE) is an educational approach for children with cerebral palsy. This paper describes the history of conductive education, and the characteristics of current programs that exist in many countries. The underlying principles and the unique techniques used in CE programs are described. These include the role of the conductor or…

  11. Multilevel Resistance Programming in Conductive Bridge Resistive Memory

    Science.gov (United States)

    Mahalanabis, Debayan

    This work focuses on the existence of multiple resistance states in a type of emerging non-volatile resistive memory device known commonly as Programmable Metallization Cell (PMC) or Conductive Bridge Random Access Memory (CBRAM), which can be important for applications such as multi-bit memory as well as non-volatile logic and neuromorphic computing. First, experimental data from small signal, quasi-static and pulsed mode electrical characterization of such devices are presented which clearly demonstrate the inherent multi-level resistance programmability property in CBRAM devices. A physics based analytical CBRAM compact model is then presented which simulates the ion-transport dynamics and filamentary growth mechanism that causes resistance change in such devices. Simulation results from the model are fitted to experimental dynamic resistance switching characteristics. The model designed using Verilog-a language is computation-efficient and can be integrated with industry standard circuit simulation tools for design and analysis of hybrid circuits involving both CMOS and CBRAM devices. Three main circuit applications for CBRAM devices are explored in this work. Firstly, the susceptibility of CBRAM memory arrays to single event induced upsets is analyzed via compact model simulation and experimental heavy ion testing data that show possibility of both high resistance to low resistance and low resistance to high resistance transitions due to ion strikes. Next, a non-volatile sense amplifier based flip-flop architecture is proposed which can help make leakage power consumption negligible by allowing complete shutdown of power supply while retaining its output data in CBRAM devices. Reliability and energy consumption of the flip-flop circuit for different CBRAM low resistance levels and supply voltage values are analyzed and compared to CMOS designs. Possible extension of this architecture for threshold logic function computation using the CBRAM devices as re

  12. COYOTE: a finite-element computer program for nonlinear heat-conduction problems

    Energy Technology Data Exchange (ETDEWEB)

    Gartling, D.K.

    1982-10-01

    COYOTE is a finite element computer program designed for the solution of two-dimensional, nonlinear heat conduction problems. The theoretical and mathematical basis used to develop the code is described. Program capabilities and complete user instructions are presented. Several example problems are described in detail to demonstrate the use of the program.

  13. 13 CFR 142.2 - What kind of conduct will result in program fraud enforcement?

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What kind of conduct will result in program fraud enforcement? 142.2 Section 142.2 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION PROGRAM FRAUD CIVIL REMEDIES ACT REGULATIONS Overview and Definitions § 142.2 What kind of...

  14. 78 FR 32228 - Cotton Research and Promotion Program: Determination of Whether To Conduct a Referendum Regarding...

    Science.gov (United States)

    2013-05-29

    ... Agricultural Marketing Service Cotton Research and Promotion Program: Determination of Whether To Conduct a Referendum Regarding 1990 Amendments to the Cotton Research and Promotion Act AGENCY: Agricultural Marketing... review by the Agricultural Marketing Service (AMS), that it is not necessary to conduct a...

  15. 43 CFR 404.47 - How will a feasibility study be conducted under this program?

    Science.gov (United States)

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false How will a feasibility study be conducted... Studies § 404.47 How will a feasibility study be conducted under this program? Feasibility studies will be... feasibility study, including the Principles and Guidelines (incorporated by reference at § 404.4). You...

  16. TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    1999-10-31

    During FY99, the Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of helping U.S. independent oil and gas producers make timely, informed technology decisions. PTTC's national organization has active grassroots programs that connect with independents through its 10 Regional Lead Organizations (RLOs). These activities--including technology workshops, resource centers, websites, newsletters, and other outreach efforts--are guided by regional Producer Advisory Groups (PAGs). The role of the national headquarters (HQ) staff includes planning and managing the PTTC program, conducting nation-wide technology transfer activities, and implementing a comprehensive communications effort. This technical progress report summarizes PTTC's accomplishments during FY99, which lay the groundwork for further growth in the future.

  17. TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    2000-05-01

    During FY00, the Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of helping U.S. independent oil and gas producers make timely, informed technology decisions. PTTC's national organization has active grassroots programs that connect with independents through its 10 Regional Lead Organizations (RLOs). These activities--including technology workshops, resource centers, websites, newsletters, and other outreach efforts--are guided by regional Producer Advisory Groups (PAGs). The role of the national headquarters (HQ) staff includes planning and managing the PTTC program, conducting nation-wide technology transfer activities, and implementing a comprehensive communications effort. This technical progress report summarizes PTTC's accomplishments during FY00, which lay the groundwork for further growth in the future.

  18. Programs EMCUPL and SCHCOPL: computation of electromagnetic coupling on a layered halfspace with complex conductivities

    Science.gov (United States)

    Kauahikaua, James P.; Anderson, Walter L.

    1979-01-01

    A number of efficient numerical computer algorithms are incorporated into a general program called EMCUPL, which calculates the electromagnetic (EM) coupling between two straight wires on the surface of a multilayered half space. Each layer has an isotropic conductivity which may be either real or complex. A second computer program, called SCHCOPL, is described which calculates the coupling for the special case of a Schlumberger or Wenner array also on a multilayered half space. Comparison with other programs shows that EMCUPL is at least as accurate, more generally applicable, and computationally more efficient FORTRAN listings of all subprograms and example calculations are given in the Appendix.

  19. Quality Assurance of Non-Local Accounting Programs Conducted in Hong Kong

    Science.gov (United States)

    Cheng, Mei-Ai; Leung, Noel W.

    2014-01-01

    This study examines the current government policy and institutional practice on quality assurance of non-local accounting programs conducted in Hong Kong. Both international guidelines, national regulations and institutional frameworks in higher education and transnational higher education, and professional practice in accounting education are…

  20. TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    2002-11-01

    The Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of assisting U.S. independent oil and gas producers make timely, informed technology decisions by providing access to information during Fiscal Year 2002 (FY02). Functioning as a cohesive national organization, PTTC has active grassroots programs through its ten Regional Lead Organizations (RLOs) and three satellite offices that efficiently extend the program reach. They bring research and academia to the table via their association with geological surveys and engineering departments. The regional directors interact with independent oil and gas producers through technology workshops, resource centers, websites, newsletters, various technical publications and other outreach efforts. These are guided by regional Producer Advisory Groups (PAGs), who are area operators and service companies working with the regional networks. The role of the national Headquarters (HQ) staff includes planning and managing the PTTC program, conducting nation wide technology transfer activities, and implementing a comprehensive communications effort. The organization effectively combines federal funding through the Department of Energy's (DOE) Office of Fossil Energy with state and industry funding to achieve important goals for all of these sectors. This integrated funding base is combined with industry volunteers guiding PTTC's activities and the dedication of national and regional staff to achieve notable results. PTTC is increasingly recognized as a critical resource for information and access to technologies, especially for smaller companies without direct contact with R&D efforts. The DOE participation is managed through the National Energy Technology Laboratory (NETL), which deploys a national natural gas program via the Strategic Center for Natural Gas (SCNG) and a national oil program through the National Petroleum Technology Office (NTPO). This technical progress report summarizes PTTC

  1. Guide for Conducting Benefit-Cost Evaluation of Realized Impacts of Public R&D Programs

    Energy Technology Data Exchange (ETDEWEB)

    Ruegg, Rosalie [TIA Consulting, Inc., Emerald Isle, NC (United States); Jordan, Gretchen B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2011-08-01

    This document provides guidance for evaluators who conduct impact assessments to determine the “realized” economic benefits and costs, energy, environmental benefits, and other impacts of the Office of Energy Efficiency and Renewable Energy’s (EERE) R&D programs. The focus of this Guide is on realized outcomes or impacts of R&D programs actually experienced by American citizens, industry, and others. Retrospective evaluations may be contrasted to prospective evaluations that reflect expected or potential outcomes only if assumptions hold. The retrospective approach described in this Guide is based on realized results only and the extent they can be attributed to the efforts of an R&D program. While it has been prepared specifically to guide retrospective benefit-cost analysis of EERE R&D Programs, this report may be used for similar analysis of other public R&D organizations.

  2. Developing a framework for assessing responsible conduct of research education programs.

    Science.gov (United States)

    Olson, Lynne E

    2010-03-01

    Education in the responsible conduct of research (RCR) in the United States has evolved over the past decade from targeting trainees to including educational efforts aimed at faculty and staff. In addition RCR education has become more focused as federal agencies have moved to recommend specific content and to mandate education in certain areas. RCR education has therefore become a research-compliance issue necessitating the development of policies and the commitment of resources to develop or expand systems for educating faculty and staff and for assuring compliance. These changes implied the need to develop a program evaluation model that could be applied to institutional RCR education programs, which were expected to differ from traditional academic credit-bearing courses targeting trainees. Information gleaned from the examination of corporate compliance models was analyzed in order to create a program evaluation module that could be used to document and assess educational programs focused on teaching RCR. A programmed series of questions for each of the nine RCR content areas identified by the United States Office of Research Integrity was created based on a performance-monitoring evaluation model. The questions focus on educational goals, resources provided to support the educational efforts, educational content, content delivery, educational outcomes, compliance requirements and feedback. Answers collected in response to the questions could be used to both document and continually improve the quality of RCR educational programs through on-going formative assessment and feedback.

  3. COYOTE : a finite element computer program for nonlinear heat conduction problems. Part I, theoretical background.

    Energy Technology Data Exchange (ETDEWEB)

    Glass, Micheal W.; Hogan, Roy E., Jr.; Gartling, David K.

    2010-03-01

    The need for the engineering analysis of systems in which the transport of thermal energy occurs primarily through a conduction process is a common situation. For all but the simplest geometries and boundary conditions, analytic solutions to heat conduction problems are unavailable, thus forcing the analyst to call upon some type of approximate numerical procedure. A wide variety of numerical packages currently exist for such applications, ranging in sophistication from the large, general purpose, commercial codes, such as COMSOL, COSMOSWorks, ABAQUS and TSS to codes written by individuals for specific problem applications. The original purpose for developing the finite element code described here, COYOTE, was to bridge the gap between the complex commercial codes and the more simplistic, individual application programs. COYOTE was designed to treat most of the standard conduction problems of interest with a user-oriented input structure and format that was easily learned and remembered. Because of its architecture, the code has also proved useful for research in numerical algorithms and development of thermal analysis capabilities. This general philosophy has been retained in the current version of the program, COYOTE, Version 5.0, though the capabilities of the code have been significantly expanded. A major change in the code is its availability on parallel computer architectures and the increase in problem complexity and size that this implies. The present document describes the theoretical and numerical background for the COYOTE program. This volume is intended as a background document for the user's manual. Potential users of COYOTE are encouraged to become familiar with the present report and the simple example analyses reported in before using the program. The theoretical and numerical background for the finite element computer program, COYOTE, is presented in detail. COYOTE is designed for the multi-dimensional analysis of nonlinear heat conduction

  4. FY05 Targeted Technology Transfer to US Independents

    Energy Technology Data Exchange (ETDEWEB)

    Donald F. Duttlinger; E. Lance Cole

    2005-11-01

    Petroleum Technology Transfer Council (PTTC) was established by domestic crude oil and natural gas producers in 1994 as a national not-for-profit organization to address the increasingly urgent need to improve the technology-transfer process in the U.S. upstream petroleum industry. PTTC's technology-transfer programs enhance U.S. national security. PTTC administers the only nation-wide, comprehensive program dedicated to maximizing America's supplies of domestic oil and gas. PTTC conducts grassroots programs through 10 Regional Lead Organizations (RLOs) and two satellite offices, leveraging their preexisting connections with industry. This organizational structure helps bring researchers and academia to the table. Nationally and regionally, volunteers within a National Board and Regional Producer Advisory Groups guide efforts. The National Board meets three times per year, an important function being approving the annual plans and budgets developed by the regions and Headquarters (HQ). Between Board meetings, an active Management and Budget Committee guide HQ activity. PTTC itself undergoes a thorough financial audit each year. The PTTC's HQ staff plans and manages all aspects of the PTTC program, conducts nation-wide technology-transfer activities, and implements a comprehensive communications program. Networking, involvement in technical activities, and an active exhibit schedule are increasing PTTC's sphere of influence with both producers and the oilfield service sector. Circulation for ''PTTC Network News'', the quarterly newsletter, has risen to nearly 17,500. About 7,500 people receive an email Technology Alert on an approximate three-week frequency. Case studies in the ''Petroleum Technology Digest in World Oil'' appear monthly, as do ''Tech Connections'' columns in ''The American Oil and Gas Reporter''. As part of its oversight responsibility for the regions

  5. Long term outcome of an attachment-based program for conduct disorder.

    Science.gov (United States)

    Moretti, M M; Holland, R; Peterson, S

    1994-08-01

    There is increasing concern among professionals and the public about the level of violence and antisocial behaviour among our youth. This has been coupled with confusion and a sense of helplessness about which types of interventions are most effective in responding to these difficulties. Some professionals and advocacy groups are calling for tougher disciplinary responses to violence and antisocial behaviour, including changes in the Young Offenders Act. Yet, such interventions are rarely effective in producing the desired reductions in these behaviours. Other professionals have called for better forms of treatment. However, few treatments have been shown to be effective in bringing about long term reductions either in aggressive behaviour or in the concomitant psychological difficulties experienced by these youths. In this paper, a description is presented of an approach to understanding conduct disorder that focuses on attachment as an organizing principle of behaviour and affect. Also, a description is presented of a community-oriented program that is based on attachment theory, as well as the results of the program evaluation at six, 12 and 18 months following discharge. The findings replicate and extend earlier findings reported by Holland et al (1) on the effectiveness of this approach.

  6. 34 CFR 658.11 - What projects and activities may a grantee conduct under this program?

    Science.gov (United States)

    2010-07-01

    ... opportunities for learning foreign languages, including less commonly taught languages; (d) Providing... STUDIES AND FOREIGN LANGUAGE PROGRAM What Kinds of Projects Does the Secretary Assist Under This Program... program to improve undergraduate instruction in international studies and foreign languages. These...

  7. 25 CFR 170.500 - What program reviews do the Secretaries conduct?

    Science.gov (United States)

    2010-04-01

    ... RESERVATION ROADS PROGRAM Planning, Design, and Construction of Indian Reservation Roads Program Facilities... planning; (3) Design; (4) Contract administration; (5) Construction; (6) Financial management; and (7...

  8. TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS

    Energy Technology Data Exchange (ETDEWEB)

    Donald Duttlinger

    2001-11-01

    The Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of helping U.S. independent oil and gas producers make timely, informed technology decisions during Fiscal Year 2001 (FY01). Functioning as a cohesive national organization, PTTC has active grassroots programs through its ten Regional Lead Organizations (RLOs). They bring research and academia to the table via their association with geological surveys and engineering departments. The regional directors interact with independent oil and gas producers through technology workshops, resource centers, websites, newsletters, various technical publications and other outreach efforts. These are guided by regional Producer Advisory Groups (PAGs), who are area operators and service companies working with the regional networks. The role of the national Headquarters (HQ) staff includes planning and managing the PTTC program, conducting nation wide technology transfer activities, and implementing a comprehensive communications effort. The organization effectively combines federal funding through the Department of Energy's (DOE) Office of Fossil Energy, state, and industry funding to achieve important goals for all of these sectors. This integrated funding base, combined with industry volunteers guiding PTTC's activities and the dedication of national and regional staff, are achieving notable results. PTTC is increasingly recognized as a critical resource for information and access to technologies, especially for smaller companies without direct contact to R&D efforts. This technical progress report summarizes PTTC's accomplishments during FY01, which lays the groundwork for further growth in the future. At a time of many industry changes and wide market movements, the organization itself is adapting to change. PTTC has built a reputation and expectation among producers and other industry participants to quickly distribute information addressing technical needs. The organization

  9. [Are programs supporting parenthood skills effective in the prevention and reduction of conduct disorders and problems of childhood?].

    Science.gov (United States)

    Karjalainen, Piia; Santalahti, Pälvi; Sihvo, Sinikka

    2016-01-01

    In this systematic review it will be evaluated whether parent-targeted programs teaching positive methods of upbringing and interaction are effective in the reduction and prevention of conduct disorders and behavioral problems in children belonging to a risk group. Altogether 29 European studies on parent-targeted programs were selected for the review. Most of the examined methods were based on the social learning theory and the cognitive behavior theory. The majority of the studies proved that long-term programs of 8 to 20 weeks'duration are effective in the reduction of behavioral problems and conduct disorders of childhood.

  10. 77 FR 72435 - Pipeline Safety: Using Meaningful Metrics in Conducting Integrity Management Program Evaluations

    Science.gov (United States)

    2012-12-05

    ... integrity management program: * * * * * (7) Methods to measure the program's effectiveness (see paragraph (k) of this section); Sec. 195.452(k) What methods to measure program effectiveness must be used? An... methods must an operator use to measure program effectiveness? (a) General. An operator must include in...

  11. Implementing a Comprehensive Program for the Prevention of Conduct Problems in Rural Communities: The Fast Track Experience1

    Science.gov (United States)

    Bierman, Karen L.

    2012-01-01

    Childhood conduct problems are predictive of a number of serious long-term difficulties (e.g., school failure, delinquent behavior, and mental health problems), making the design of effective prevention programs a priority. The Fast Track Program is a demonstration project currently underway in four demographically diverse areas of the United States, testing the feasibility and effectiveness of a comprehensive, multicomponent prevention program targeting children at risk for conduct disorders. This paper describes some lessons learned about the implementation of this program in a rural area. Although there are many areas of commonality in terms of program needs, program design, and implementation issues in rural and urban sites, rural areas differ from urban areas along the dimensions of geographical dispersion and regionalism, and community stability and insularity. Rural programs must cover a broad geographical area and must be sensitive to the multiple, small and regional communities that constitute their service area. Small schools, homogeneous populations, traditional values, limited recreational, educational and mental health services, and politically conservative climates are all more likely to emerge as characteristics of rural rather than urban sites (Sherman, 1992). These characteristics may both pose particular challenges to the implementation of prevention programs in rural areas, as well as offer particular benefits. Three aspects of program implementation are described in detail: (a) community entry and program initiation in rural areas, (b) the adaptation of program components and service delivery to meet the needs of rural families and schools, and (c) issues in administrative organization of a broadly dispersed tricounty rural prevention program. PMID:9338956

  12. Parent Education Programs as a Psychiatric Approach to Children with Conduct Disorder: An Evaluation through Two Samples

    Directory of Open Access Journals (Sweden)

    Burcu Arkan

    2009-08-01

    Full Text Available Conduct disorder is a category to describe the behaviors which have an adverse affect on the individual, family or society, violate the basic rights of other people and ignore the age-appropriate social norms and rules. Parental behaviors should be shaped as well as those of the children in order for conduct disorder to be treated. The reason for this is that parental attitudes play a key role in emergence of anti-social behaviors among children. Therefore, parent programs have been undertaken for the last thirty years. It has been proved that parent programs are effective in children with conduct disorder who display highly disruptive behaviors. The two best parent programs implemented on the parents of children diagnosed with conduct disorder are Triple P and Incredible Years which cooperate with families and the society, reduce the risk factors, support the protective factors, have a multi-disciplinary approach (psychiatrist, psychologist, nurse, child development and educationalist, social service specialist, psychological consultant, teacher, etc., having high evidence standards, use randomized controlled studies and yield long-term results. For that reason, this literature review was conducted in order to evaluate the efficacy of these two programs, to determine the differences, what is known about the issue.

  13. How to Conduct a Qualitative Program Evaluation in the Light of Eisner’s Educational Connoisseurship and Criticism Model

    Directory of Open Access Journals (Sweden)

    İsmail Yüksel

    2010-10-01

    Full Text Available AbstractThe quantitative methodologies have been traditionally employed in the educational research so far. However, as long as with the appreciation and widespread use of the qualitative methodologies in many disciplines, many different educational areas have started to be examined in terms of qualitative research aspects. Particularly, the qualitative evaluation of the education programs has received considerable interest and there have been recently some attempts to develop a qualitative methodology for evaluating educational programs based upon the tenets of program evaluation. The evaluators have underlined the benefits of qualitative methods to boost the information shared with decision-makers and policy makers. The most inclusive endeavour has been carried out by Eisner. Eisner’s program evaluation model presents the role of educational connoisseurship and criticism in educational evaluation in terms of qualitative evaluation. This study aims at examining how a qualitative program evaluation is conducted in relation with the Eisner’s evaluation model.

  14. 75 FR 41392 - Sorghum Promotion and Research Program: Procedures for the Conduct of Referenda

    Science.gov (United States)

    2010-07-16

    ... Agricultural Marketing Service 7 CFR Part 1221 Sorghum Promotion and Research Program: Procedures for the... Commodity Promotion, Research, and Information Act of 1996 (Act) authorizes a program of promotion, research, and information to be developed through the promulgation of the Sorghum Promotion, Research,...

  15. 15 CFR 923.133 - Procedure for conducting continuing reviews of approved State CZM programs.

    Science.gov (United States)

    2010-01-01

    ... will submit a financial assistance application or work program, whichever is applicable, on a timetable... evaluation team indicating that they wish to receive the final findings. Notice of the availability of the... approved CZM program; (B) The management agency is effectively playing a leadership role in coastal...

  16. TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS

    Energy Technology Data Exchange (ETDEWEB)

    Donald Duttlinger

    1999-12-01

    During FY99, the Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of helping U.S. independent oil and gas producers make timely, informed technology decisions. PTfC's national organization has active grassroots programs that connect with independents through its 10 Regional Lead Organizations (RLOs). These activities--including technology workshops, resource centers, websites, newsletters, and other outreach efforts--are guided by regional Producer Advisory Groups (PAGs). The role of the national headquarters (HQ) staff includes planning and managing the PTTC program, conducting nation-wide technology transfer activities, and implementing a comprehensive communications effort. This technical progress report summarizes PTTC's accomplishments during FY99, which lay the groundwork for further growth in the future.

  17. Comparing an Emotion- and a Behavior-Focused Parenting Program as Part of a Multsystemic Intervention for Child Conduct Problems.

    Science.gov (United States)

    Duncombe, Melissa E; Havighurst, Sophie S; Kehoe, Christiane E; Holland, Kerry A; Frankling, Emma J; Stargatt, Robyn

    2016-01-01

    This study evaluated the effectiveness of a multisystemic early intervention that included a comparison of an emotion- and behavior-focused parenting program for children with emerging conduct problems. The processes that moderated positive child outcomes were also explored. A repeated measures cluster randomized group design methodology was employed with three conditions (Tuning in to Kids, Positive Parenting Program, and waitlist control) and two periods (preintervention and 6-month follow-up). The sample consisted of 320 predominantly Caucasian 4- to 9-year-old children who were screened for disruptive behavior problems. Three outcome measures of child conduct problems were evaluated using a parent (Eyberg Child Behavior Inventory) and teacher (Strengths and Difficulties Questionnaire) rating scale and a structured child interview (Home Interview With Child). Six moderators were assessed using family demographic information and a parent-rated measure of psychological well-being (Depression Anxiety and Stress Scales short form). The results indicated that the multisystemic intervention was effective compared to a control group and that, despite different theoretical orientations, the emotion- and behavior-focused parenting programs were equally effective in reducing child conduct problems. Child age and parent psychological well-being moderated intervention response. This effectiveness trial supports the use of either emotion- or behavior-focused parenting programs in a multisystemic early intervention and provides greater choice for practitioners in the selection of specific programs.

  18. FY05 Targeted Technology Transfer to US Independents

    Energy Technology Data Exchange (ETDEWEB)

    Donald F. Duttlinger; E. Lance Cole

    2005-11-01

    Petroleum Technology Transfer Council (PTTC) was established by domestic crude oil and natural gas producers in 1994 as a national not-for-profit organization to address the increasingly urgent need to improve the technology-transfer process in the U.S. upstream petroleum industry. PTTC's technology-transfer programs enhance U.S. national security. PTTC administers the only nation-wide, comprehensive program dedicated to maximizing America's supplies of domestic oil and gas. PTTC conducts grassroots programs through 10 Regional Lead Organizations (RLOs) and two satellite offices, leveraging their preexisting connections with industry. This organizational structure helps bring researchers and academia to the table. Nationally and regionally, volunteers within a National Board and Regional Producer Advisory Groups guide efforts. The National Board meets three times per year, an important function being approving the annual plans and budgets developed by the regions and Headquarters (HQ). Between Board meetings, an active Management and Budget Committee guide HQ activity. PTTC itself undergoes a thorough financial audit each year. The PTTC's HQ staff plans and manages all aspects of the PTTC program, conducts nation-wide technology-transfer activities, and implements a comprehensive communications program. Networking, involvement in technical activities, and an active exhibit schedule are increasing PTTC's sphere of influence with both producers and the oilfield service sector. Circulation for ''PTTC Network News'', the quarterly newsletter, has risen to nearly 17,500. About 7,500 people receive an email Technology Alert on an approximate three-week frequency. Case studies in the ''Petroleum Technology Digest in World Oil'' appear monthly, as do ''Tech Connections'' columns in ''The American Oil and Gas Reporter''. As part of its oversight responsibility for the regions

  19. Improving preschooler conduct adaptation by using a social learning program based on motion games

    Directory of Open Access Journals (Sweden)

    Zsuzsa Szilárda

    2017-03-01

    Full Text Available Being aware of the changes which occur under the influence of environmental conditions, education, culture and social roles upon the child is indispensable with a view to build up a conduct adapted to the social environment. For any preschooler child, entering kindergarten is an important social event and getting adapted to the new situation is not easy. Broadening the relational framework with objects, other individuals, with one’s own self, results in disciplining preschooler conducts and increasing the number of socially desirable conducts. Relying upon the above statements, this study is aimed at working out a social learning programme made up of motion games involving socialization/cooperation elements intended for inducing amelioration in terms of the child’s conduct during the process of adaptation to the kindergarten environment. The experiment was conducted using a sample of “little group” preschoolers (children 3-4 years of age. As research methods, the following have been used: studying the reference literature, the method of pedagogical observation, the method of experiment and the method of playing. Further to the practical application of the programme worked out with a view to enhance the adaptation conduct in the said subjects, the experimental group proved to have undergone a significant positive evolution and each subject showed improvements considering the conduct of adaptation to kindergarten conditions, as highlighted by the change i.e. higher values in terms of the individual scores achieved at the final test. Preschool education is meant to provide all possible ways and means to enable any child’s integration into groups of children of a peer age, to develop sociability in children and to create favorable conditions for building out inter-children networks.

  20. Supporting Policy and Program Decisions: Recommendations for Conducting High Quality Systematic Evidence Reviews. Issue Brief

    Science.gov (United States)

    Mathematica Policy Research, Inc., 2012

    2012-01-01

    Policy and program decisions typically involve selecting one choice from among a set of options, and research about the effect of those options can help inform the decision process. However, for the research to be useful, decision makers need a way of drawing accurate lessons from what often can be a large assortment of relevant studies.…

  1. FitKids360: Design, Conduct, and Outcomes of a Stage 2 Pediatric Obesity Program

    Directory of Open Access Journals (Sweden)

    Jared M. Tucker

    2014-01-01

    Full Text Available This paper describes FitKids360, a stage 2 pediatric weight management program. FitKids360 is a physician-referred, multicomponent, low-cost healthy lifestyle program for overweight and obese youth 5–16 years of age and their families. FitKids360 provides an evidence-based approach to the treatment of pediatric overweight by targeting patients’ physical activity, screen time, and dietary behaviors using a family-centered approach. The intervention begins with a two-hour orientation and assessment period followed by six weekly sessions. Assessments include lifestyle behaviors, anthropometry, and the Family Nutrition and Physical Activity (FNPA survey, which screens for obesogenic risk factors in the home environment. Outcomes are presented from 258 patients who completed one of 33 FitKids360 classes. After completing FitKids360, patients increased moderate to vigorous physical activity by 14 minutes (P=0.019, reduced screen time by 44 minutes (P<0.001, and improved key dietary behaviors. Overall, FNPA scores increased by 9% (P<0.001 and 69% of patients with “high risk” FNPA scores at baseline dropped below the “high risk” range by followup. Patients also lowered BMIs (P=0.011 and age- and sex-adjusted BMI z-scores (P<0.001 after completing the 7-week program. We hope this report will be useful to medical and public health professionals seeking to develop stage 2 pediatric obesity programs.

  2. Genetically Programming Interfaces between Active Materials, Conductive Pathway and Current Collector in Li Ion Batteries

    Science.gov (United States)

    2012-01-01

    assembled into coin cell with metallic lithium as counter electrode. Electrochemical characterization was conducted by galvanostatically cycling the half...encodes either A1, A2, S7, T7 or H7. These DNAs were then introduced into bacteria cells for amplification. Genetic sequencing performed on the

  3. Assessing and Treating Aggression and Conduct Problems in Schools: Implications from the Coping Power Program

    Science.gov (United States)

    Powell, Nicole P.; Boxmeyer, Caroline L.; Baden, Rachel; Stromeyer, Sara; Minney, Jessica A.; Mushtaq, Asia; Lochman, John E.

    2011-01-01

    Children with high levels of aggressive behavior and conduct problems create major management problems in school settings and interfere with the learning environment of their classmates and with their own academic achievement. A contextual social-cognitive model can provide a framework for understanding risk factors involved in the development and…

  4. E-book for Knowledge Management in Scientific Research Conducted in the Medical Sciences Graduate Program

    Directory of Open Access Journals (Sweden)

    Oramis Sosa Palacios

    2014-12-01

    Full Text Available The training of students enrolled in the Medical Sciences graduate program (residents includes research activities such as research projects, the final paper of the specialty, scientific events and scientific publications. Knowledge gaps in residents lead to problems seen in both the poor quality of the research project and the final paper of the specialty and in the lack of autonomy to make decisions, affecting their overall training. An electronic book aimed at residents was created for knowledge management in scientific research. The first version was designed using the Crheasoft 2.0 program. It consists of: presentation, start modules, list of topics and complementary information. It comprises condensed knowledge on: research management, research methodology, statistics, information management, computer science, linguistics and language. This e-book contributes to the execution of research activities and promotes learning independence.

  5. Conducting international diploma course on malaria program planning and management (1996-2012.

    Directory of Open Access Journals (Sweden)

    Ali Reza Mesdaghinia

    2013-12-01

    Full Text Available Malaria is still a public health problem in the world. One of the main objectives of World Health organization is capacity building of authorities who are involved with malaria control activities.The first course was conducted in 1996 in Bandar Abbas Training center. The course was conducted jointly by the Ministry of Health and Medical Education of Iran, WHO-EMRO and School of Public health, Tehran university of Medical Sciences. In year 2002, Iran has been designated as WHO regional Malaria Training Center. Prior to initiate the course, pre-test evaluations including 11 subjects were carried out. The examinations include multiple choice questions. Different methods of teaching including lecture, laboratory, workshop, team work, field exercise and presentation were used. The duration of the course was 9 weeks. A total of 360 contact hours were taught. The main subjects were Basic epidemiology and Simple Statistics, Malaria Parasitology, Malaria disease Management, Malaria Entomology, Vector Control, Epidemiological approach, Filed work and Planning. The requirement for achievement of the course was to have at least 60% of the total mark for awarding the diploma certificate. The 13th course was conducted by the financial support of Islamic Development Bank (IDB.A total of 300 participants from 26 different countries have been graduated from these courses so far.This course is providing the skill for decision making, how to combat against malaria in their country and is parallel to the policy of the malaria control for capacity building in malarious areas of the world.

  6. THERM3D -- A boundary element computer program for transient heat conduction problems

    Energy Technology Data Exchange (ETDEWEB)

    Ingber, M.S. [New Mexico Univ., Albuquerque, NM (United States). Dept. of Mechanical Engineering

    1994-02-01

    The computer code THERM3D implements the direct boundary element method (BEM) to solve transient heat conduction problems in arbitrary three-dimensional domains. This particular implementation of the BEM avoids performing time-consuming domain integrations by approximating a ``generalized forcing function`` in the interior of the domain with the use of radial basis functions. An approximate particular solution is then constructed, and the original problem is transformed into a sequence of Laplace problems. The code is capable of handling a large variety of boundary conditions including isothermal, specified flux, convection, radiation, and combined convection and radiation conditions. The computer code is benchmarked by comparisons with analytic and finite element results.

  7. TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    2000-11-01

    The Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of helping U.S. independent oil and gas producers make timely, informed technology decisions during Fiscal Year 2000 (FY00). Functioning as a cohesive national organization, PTTC has active grassroots programs through its ten Regional Lead Organizations (RLOs) who bring research and academia to the table via their association with geological surveys and engineering departments. The regional directors connect with independent oil and gas producers through technology workshops, resource centers, websites, newsletters, various technical publications and other outreach efforts. These are guided by regional Producer Advisory Groups (PAGs), who are area operators and service companies working with the Regional Lead Organizations. The role of the national headquarters (HQ) staff includes planning and managing the PTTC program, conducting nation-wide technology transfer activities, and implementing a comprehensive communications effort. The organization effectively combines federal, state, and industry funding to achieve important goals for all of these sectors. This integrated funding base, combined with industry volunteers guiding PTTC's activities and the dedication of national and regional staff, are achieving notable results. PTTC is increasingly recognized as a critical resource for information and access to technologies, especially for smaller companies. This technical progress report summarizes PTTC's accomplishments during FY00, which lays the groundwork for further growth in the future. At a time of many industry changes and market movements, the organization has built a reputation and expectation to address industry needs of getting information distributed quickly which can impact the bottom line immediately.

  8. Non-physiological increase of AV conduction time in sinus disease patients programmed in AAIR-based pacing mode.

    Science.gov (United States)

    Mabo, Philippe; Cebron, Jean-Pierre; Solnon, Aude; Tassin, Aude; Graindorge, Laurence; Gras, Daniel

    2012-11-01

    The EVOCAV(DS) trial aimed to quantify the paradoxal atrioventricular (AV) conduction time lengthening in sinus node (SD) patients (pts) paced in AAIR-based pacing mode. SD pts, implanted with dual-chamber pacemaker programmed in AAIR-based pacing mode, were randomized in two arms for a 1-month period: the low atrial pacing (LAP; basic rate at 60 bpm, dual sensor with minimal slope) and the high atrial pacing (HAP; basic rate at 70 bpm, dual sensor with optimized slope, overdrive pacing) arm. At 1 month, crossover was performed for an additional 1-month period. AV conduction time, AV block occurrence and AV conduction time adaptation during exercise were ascertained from device memories at each follow-up. Seventy-nine pts participated to the analysis (75 ± 8 years; 32 male; PR = 184 ± 38 ms; bundle branch block n = 12; AF history n = 36; antiarrhythmic treatment n = 53; beta-blockers n = 27; class III/Ic n = 18; both n = 8). The mean AV conduction time was significantly greater during the HAP (275 ± 51 ms) vs. LAP (263 ± 49 ms) period (p AV blocks occurred in 49 % of pts in the HAP vs. 19 % in the LAP period (p AV conduction time during exercise. AAIR-based pacing in SD pts may induce a significant lengthening of pts' AV conduction time, including frequent abnormal adaptation of AV conduction time during exercise.

  9. Results of an interlaboratory fatigue test program conducted on alloy 800H at room and elevated temperatures

    Science.gov (United States)

    Ellis, J. R.

    1987-01-01

    The experimental approach adopted for low cycle fatigue tests of alloy 800H involved the use of electrohydraulic test systems, hour glass geometry specimens, diametral extensometers, and axial strain computers. Attempts to identify possible problem areas were complicated by the lack of reliable data for the heat of Alloy 800H under investigation. The method adopted was to generate definitive test data in an Interlaboratory Fatigue Test Program. The laboratories participating in the program were Argonne National Laboratory, Battelle Columbus, Mar-Test, and NASA Lewis. Fatigue tests were conducted on both solid and turbular specimens at temperatures of 20, 593, and 760 C and strain ranges of 2.0, 1.0, and 0.5 percent. The subject test method can, under certain circumstances, produce fatigue data which are serious in error. This approach subsequently was abandoned at General Atomic Company in favor of parallel gage length specimens and axial extensometers.

  10. Een sociaal-cognitief interventieprogramma voor gedragsgestoorde kinderen, een vooronderzoek. / A social cognitive intervention program for children with a conduct disorder, a pilot study.

    NARCIS (Netherlands)

    van Manen, T.; Prins, P.J.M.; Emmelkamp, P.M.G.

    1999-01-01

    Conducted a pilot study on the efficacy of a social-cognitive group intervention program based on social information-processing theory (K. A. Dodge, 1986) for children with a conduct disorder. Human Ss: 16 Dutch school-age children and adolescents (aged 10-13 yrs) (conduct disorder). Ss participated

  11. Uncertainty analysis of heat flux measurements estimated using a one-dimensional, inverse heat-conduction program.

    Energy Technology Data Exchange (ETDEWEB)

    Nakos, James Thomas; Figueroa, Victor G.; Murphy, Jill E. (Worcester Polytechnic Institute, Worcester, MA)

    2005-02-01

    The measurement of heat flux in hydrocarbon fuel fires (e.g., diesel or JP-8) is difficult due to high temperatures and the sooty environment. Un-cooled commercially available heat flux gages do not survive in long duration fires, and cooled gages often become covered with soot, thus changing the gage calibration. An alternate method that is rugged and relatively inexpensive is based on inverse heat conduction methods. Inverse heat-conduction methods estimate absorbed heat flux at specific material interfaces using temperature/time histories, boundary conditions, material properties, and usually an assumption of one-dimensional (1-D) heat flow. This method is commonly used at Sandia.s fire test facilities. In this report, an uncertainty analysis was performed for a specific example to quantify the effect of input parameter variations on the estimated heat flux when using the inverse heat conduction method. The approach used was to compare results from a number of cases using modified inputs to a base-case. The response of a 304 stainless-steel cylinder [about 30.5 cm (12-in.) in diameter and 0.32-cm-thick (1/8-in.)] filled with 2.5-cm-thick (1-in.) ceramic fiber insulation was examined. Input parameters of an inverse heat conduction program varied were steel-wall thickness, thermal conductivity, and volumetric heat capacity; insulation thickness, thermal conductivity, and volumetric heat capacity, temperature uncertainty, boundary conditions, temperature sampling period; and numerical inputs. One-dimensional heat transfer was assumed in all cases. Results of the analysis show that, at the maximum heat flux, the most important parameters were temperature uncertainty, steel thickness and steel volumetric heat capacity. The use of a constant thermal properties rather than temperature dependent values also made a significant difference in the resultant heat flux; therefore, temperature-dependent values should be used. As an example, several parameters were varied to

  12. Summary of activities of the life cycle costing workshop conducted by the Environmental Restoration Program of Oak Ridge National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    1992-08-01

    A five-day life cycle workshop was conducted by the Environmental Restoration (FR) Program of Oak Ridge National Laboratory (ORNL) to develop appropriate remediation scenarios for each Waste Area Grouping (WAG) at ORNL and to identify associated data needs (e.g., remedial investigations, special studies, and technology demonstrations) and required interfaces. Workshop participants represented the Department of Energy, Martin Marietta Energy Systems, Inc., Bechtel National, Radian Corporation, EBASCO Corporation, and M-K Ferguson. The workshop was used to establish a technical basis for remediation activities at each WAG. The workshop results are documented in this report and provide the baseline for estimating the technical scope for each WAG. The scope and associated budgets and schedules will be summarized in baseline reports for each WAG, which, in turn, will be compiled into an overall strategy document for ORNL ER.

  13. 3-D parallel program for numerical calculation of gas dynamics problems with heat conductivity on distributed memory computational systems (CS)

    Energy Technology Data Exchange (ETDEWEB)

    Sofronov, I.D.; Voronin, B.L.; Butnev, O.I. [VNIIEF (Russian Federation)] [and others

    1997-12-31

    The aim of the work performed is to develop a 3D parallel program for numerical calculation of gas dynamics problem with heat conductivity on distributed memory computational systems (CS), satisfying the condition of numerical result independence from the number of processors involved. Two basically different approaches to the structure of massive parallel computations have been developed. The first approach uses the 3D data matrix decomposition reconstructed at temporal cycle and is a development of parallelization algorithms for multiprocessor CS with shareable memory. The second approach is based on using a 3D data matrix decomposition not reconstructed during a temporal cycle. The program was developed on 8-processor CS MP-3 made in VNIIEF and was adapted to a massive parallel CS Meiko-2 in LLNL by joint efforts of VNIIEF and LLNL staffs. A large number of numerical experiments has been carried out with different number of processors up to 256 and the efficiency of parallelization has been evaluated in dependence on processor number and their parameters.

  14. Appropriate Pedagogical Approaches For Conduct of Site Planning and Built Environment Studio in Spatial Planning Education Programs

    Directory of Open Access Journals (Sweden)

    Valliappan Alagappan

    2015-09-01

    Full Text Available Spatial planning education is multi-disciplinary in nature and particularly site planning needs exposure to Engineering, Architectural, Landscape, Sociological, Economic, and Infrastructural aspects. The curriculum of the spatial planning program introduces the site-planning studio (multi-level design and planning at the initial semesters without introduction of single space design and planning. Due to inadequate exposure the students find it difficult to plan and design residential layouts in the planning studio. The site-planning studio provides a good understanding of how the articulation of density can modify the built form and environment. There are considerable lacunae in the adopted approaches of site planning studios in various planning schools. The author discusses in detail the varied methodologies and approaches adopted in site planning and built environment studio programs. The two pedagogical studios methods experimented in the site-planning studio were discussed at length. One method discusses from unit level planning and designing to block and neighborhood level and other method discusses from neighborhood to block and unit level. Within these two studio pedagogical methodologies, for conduct of site planning exercises two approaches were generally adopted i.e block-based approach and Design based approach. The characteristic features, outcomes, advantages and disadvantages of each methodologies /approach offer an understanding of how site-planning studios have to be taught in the planning program. The author emphasizes the importance of a gradual progression from a single space design and planning to multi-level design and planning for enhanced comprehension of students.

  15. Summary of activities of the life cycle costing workshop conducted by the Environmental Restoration Program of Oak Ridge National Laboratory. Enviromental Restoration Program

    Energy Technology Data Exchange (ETDEWEB)

    1992-08-01

    A five-day life cycle workshop was conducted by the Environmental Restoration (FR) Program of Oak Ridge National Laboratory (ORNL) to develop appropriate remediation scenarios for each Waste Area Grouping (WAG) at ORNL and to identify associated data needs (e.g., remedial investigations, special studies, and technology demonstrations) and required interfaces. Workshop participants represented the Department of Energy, Martin Marietta Energy Systems, Inc., Bechtel National, Radian Corporation, EBASCO Corporation, and M-K Ferguson. The workshop was used to establish a technical basis for remediation activities at each WAG. The workshop results are documented in this report and provide the baseline for estimating the technical scope for each WAG. The scope and associated budgets and schedules will be summarized in baseline reports for each WAG, which, in turn, will be compiled into an overall strategy document for ORNL ER.

  16. Dosimeter-Type NOx Sensing Properties of KMnO4 and Its Electrical Conductivity during Temperature Programmed Desorption

    Directory of Open Access Journals (Sweden)

    Ralf Moos

    2013-04-01

    Full Text Available An impedimetric NOx dosimeter based on the NOx sorption material KMnO4 is proposed. In addition to its application as a low level NOx dosimeter, KMnO4 shows potential as a precious metal free lean NOx trap material (LNT for NOx storage catalysts (NSC enabling electrical in-situ diagnostics. With this dosimeter, low levels of NO and NO2 exposure can be detected electrically as instantaneous values at 380 °C by progressive NOx accumulation in the KMnO4 based sensitive layer. The linear NOx sensing characteristics are recovered periodically by heating to 650 °C or switching to rich atmospheres. Further insight into the NOx sorption-dependent conductivity of the KMnO4-based material is obtained by the novel eTPD method that combines electrical characterization with classical temperature programmed desorption (TPD. The NOx loading amount increases proportionally to the NOx exposure time at sorption temperature. The cumulated NOx exposure, as well as the corresponding NOx loading state, can be detected linearly by electrical means in two modes: (1 time-continuously during the sorption interval including NOx concentration information from the signal derivative or (2 during the short-term thermal NOx release.

  17. A framework for conducting a national study of substance abuse treatment programs serving American Indian and Alaska native communities.

    Science.gov (United States)

    Novins, Douglas K; Moore, Laurie A; Beals, Janette; Aarons, Gregory A; Rieckmann, Traci; Kaufman, Carol E

    2012-09-01

    Because of their broad geographic distribution, diverse ownership and operation, and funding instability, it is a challenge to develop a framework for studying substance abuse treatment programs serving American Indian and Alaska Native communities at a national level. This is further complicated by the historic reluctance of American Indian and Alaska Native communities to participate in research. We developed a framework for studying these substance abuse treatment programs (n ≈ 293) at a national level as part of a study of attitudes toward, and use of, evidence-based treatments among substance abuse treatment programs serving AI/AN communities with the goal of assuring participation of a broad array of programs and the communities that they serve. Because of the complexities of identifying specific substance abuse treatment programs, the sampling framework divides these programs into strata based on the American Indian and Alaska Native communities that they serve: (1) the 20 largest tribes (by population); (2) urban AI/AN clinics; (3) Alaska Native Health Corporations; (4) other Tribes; and (5) other regional programs unaffiliated with a specific AI/AN community. In addition, the recruitment framework was designed to be sensitive to likely concerns about participating in research. This systematic approach for studying substance abuse and other clinical programs serving AI/AN communities assures the participation of diverse AI/AN programs and communities and may be useful in designing similar national studies.

  18. A computer program to calculate the resistivity of a thin film deposited on a conductive substrate from four-point probe measurements

    Science.gov (United States)

    Oberle, L. G.; Fralick, G. C.

    1986-01-01

    A series of FORTRAN-77 programs is described which correct for the effect of a conducting substrate when a linear four-point probe is used to measure the resistivity of a thin film. The resistivity of the film is given in terms of the thicknesses of the film and substrate, the known resistivity of the substrate, and the measured delta V/I. A full development is given as well as a complete description of the operation of the programs. The programs themselves can be obtained through COSMIC, and are identified as LEW No. 14381.

  19. CARL: a LabVIEW 3 computer program for conducting exposure therapy for the treatment of dental injection fear.

    Science.gov (United States)

    Coldwell, S E; Getz, T; Milgrom, P; Prall, C W; Spadafora, A; Ramsay, D S

    1998-04-01

    This paper describes CARL (Computer Assisted Relaxation Learning), a computerized, exposure-based therapy program for the treatment of dental injection fear. The CARL program operates primarily in two different modes; in vitro, which presents a video-taped exposure hierarchy, and in vivo, which presents scripts for a dentist or hygienist to use while working with a subject. Two additional modes are used to train subjects to use the program and to administer behavioral assessment tests. The program contains five different modules, which function to register a subject, train subjects to use physical and cognitive relaxation techniques, deliver an exposure hierarchy, question subjects about the helpfulness of each of the therapy components, and test for memory effects of anxiolytic medication. Nine subjects have completed the CARL therapy program and 1-yr follow-up as participants in a placebo-controlled clinical trial examining the effects of alprazolam on exposure therapy for dental injection phobia. All nine subjects were able to receive two dental injections, and all reduced their general fear of dental injections. Initial results therefore indicate that the CARL program successfully reduces dental injection fear.

  20. MyAgRecord: An Online Career Portfolio Management Tool for High School Students Conducting Supervised Agricultural Experience Programs.

    Science.gov (United States)

    Emis, Larry; Dillingham, John

    Texas's online career portfolio management tool for high school students participating in supervised agricultural experience programs (SAEPs) was developed in 1998 by a committee of Texas high school teachers of agriscience and Texas Education Agency personnel. The career portfolio management tool reflects General Accepted Accounting Principles…

  1. 76 FR 39283 - Enforcement of Nondiscrimination on the Basis of Handicap in Programs or Activities Conducted by...

    Science.gov (United States)

    2011-07-06

    ... conducted by the agency. For example, auxiliary aids useful for persons with impaired vision include readers... affecting one or more of ] the following body systems: Neurological; musculoskeletal; special sense organs... shall ensure that interested persons, including persons with impaired vision or hearing, can...

  2. Prosthodontic program directors' perceptions regarding implant placement by prosthodontic residents: a 2004 survey conducted by the Educational Policy Subcommittee of the American College of Prosthodontists.

    Science.gov (United States)

    Sukotjo, Cortino; Arbree, Nancy S

    2008-12-01

    In 2004, a survey regarding implant placement by prosthodontic residents was conducted by the Educational Policy Subcommittee of the American College of Prosthodontists (ACP). The aim of the survey was to assess the current trends in implant curricula at advanced graduate prosthodontics programs in the United States and Canada and determine the issues surrounding surgical implant training for prosthodontic residents. The survey was mailed to the prosthodontic/maxillofacial prosthetic program directors of the 59 prosthodontic graduate programs in the United States and Canada in 2004. Of these, 27 program directors replied, yielding a response rate of 46%. Of the replying programs, 43% either required residents to place or offered the option to have residents place implants. Forty-four percent reported that residents participate by functioning as first assistants for some of their implant patients, 40% have a specific curriculum to train residents in implant placement, 50% reported not having any institutional barriers that prevent program directors from training prosthodontic residents in implant placement, 51% provide implant training using plastic jaws, and 66% of the programs required residents to observe implant surgery in the clinic before they are permitted to place implants. Of prosthodontic residents who treated implant-related patients, the majority treated 11 to 20 patients during their residency. In 2004, 40% of program directors were not trained in the placement of dental implants, and if they did have the implant training, the majority (82%) stated that the nature of their training was 1- to 3-day course(s). This survey showed that implant dentistry has become an integral part of the postgraduate prosthodontic curriculum. The trends to incorporate implant placement into the postgraduate prosthodontic curriculum were already evident prior to 2004. To address the demand for implant treatment in patient care and enhance surgical implant knowledge, the ACP

  3. Appropriate Pedagogical Approaches For Conduct of Site Planning and Built Environment Studio in Spatial Planning Education Programs

    OpenAIRE

    Valliappan Alagappan

    2015-01-01

    Spatial planning education is multi-disciplinary in nature and particularly site planning needs exposure to Engineering, Architectural, Landscape, Sociological, Economic, and Infrastructural aspects. The curriculum of the spatial planning program introduces the site-planning studio (multi-level design and planning) at the initial semesters without introduction of single space design and planning. Due to inadequate exposure the students find it difficult to plan and design residential layouts ...

  4. Environmental effects on composite airframes: A study conducted for the ARM UAV Program (Atmospheric Radiation Measurement Unmanned Aerospace Vehicle)

    Energy Technology Data Exchange (ETDEWEB)

    Noguchi, R.A.

    1994-06-01

    Composite materials are affected by environments differently than conventional airframe structural materials are. This study identifies the environmental conditions which the composite-airframe ARM UAV may encounter, and discusses the potential degradation processes composite materials may undergo when subjected to those environments. This information is intended to be useful in a follow-on program to develop equipment and procedures to prevent, detect, or otherwise mitigate significant degradation with the ultimate goal of preventing catastrophic aircraft failure.

  5. How to Conduct a Qualitative Program Evaluation in the Light of Eisner’s Educational Connoisseurship and Criticism Model

    OpenAIRE

    İsmail Yüksel

    2010-01-01

    AbstractThe quantitative methodologies have been traditionally employed in the educational research so far. However, as long as with the appreciation and widespread use of the qualitative methodologies in many disciplines, many different educational areas have started to be examined in terms of qualitative research aspects. Particularly, the qualitative evaluation of the education programs has received considerable interest and there have been recently some attempts to develop a qualitative m...

  6. Aquatic monitoring programs conducted during environmental impact assessments in Canada: preliminary assessment before and after weakened environmental regulation.

    Science.gov (United States)

    Roach, Brynn; Walker, Tony R

    2017-03-01

    Aquatic monitoring programs are imperative for the functioning of the environmental impact assessment (EIA) process and a cornerstone for industrial compliance in Canada. However, in 2012, several leading pieces of federal environmental legislation (e.g., Canadian Environmental Assessment Act c.19, s. 52, 2012) were drastically altered, effectively weakening levels of environmental protection for aquatic ecosystems during project developments. This paper assesses the impact of CEAA 2012 on aquatic monitoring programs (and subsequent monitoring data reporting) across Canada for ten projects (five completed pre-CEAA 2012 and five completed post-CEAA 2012). Projects included four energy and six mining projects and were selected based on the following criteria: (i) representative of Canada's resource economy; (ii) project information was publicly available; and (iii) strong public interest. Projects pre- and post-CEAA 2012 exhibited few apparent differences before and after environmental regulatory changes. However, wide discrepancies exist in numbers and types of parameters reported, along with a lack of consistency in reporting. Projects pre-CEAA 2012 provided more follow-up monitoring commitments. Although qualitative differences remain inconclusive, this paper highlights requirements for further assessment of aquatic monitoring and follow-up programs in Canada. Recommendations for the government to consider during reviews of the federal environmental assessment processes include (i) improved transparency on the Canadian Environmental Assessment Agency website ( https://www.ceaa-acee.gc.ca/ ); (ii) creation of a legally binding standardized aquatic monitoring program framework to ensure that all Canadian aquatic ecosystems are monitored with equal rigour; and (iii) commitments and justification related to frequency of aquatic monitoring of water quality.

  7. Material studies in the frame of CLIC Accelerating structures production conducted within the Mechanics program together with Metso Oy

    CERN Document Server

    Nurminen, Janne

    2012-01-01

    MeChanICs (Marie Curie Linking Industry to CERN) is an Industry to Academia Partnership and Pathways (IAPP) platform for precision manufacturing knowledge exchange bringing together five Finnish manufacturing companies with Helsinki Insitute of Physics (HIP) and CERN. The scientific objective of MeChanICs project is to contribute to the manufacturing RTD of CLIC enabling technologies. The focus is on the design, materials, machining, brazing and assembly of A CLIC accelerating structure. This study deals with the materials work package of the program and wants to explore the following items: 1) producing copper accelerating structures for CLIC from raw copper powder by near net shape hot isostatic pressing (HIP). 2) The feasibility to use HIP diffusion bonding of the accelerator structures as a function of surface quality and applied temperature and pressure. 3) Brazing for CLIC AS auxiliary systems, like water cooling or damping manifolds, to the disc stack by coating one of the brazing partners with an enab...

  8. Neutrophil volume, conductivity and scatter parameters with effective modeling of molecular activity statistical program gives better results in neonatal sepsis.

    Science.gov (United States)

    Celik, I H; Demirel, G; Sukhachev, D; Erdeve, O; Dilmen, U

    2013-02-01

    Neonatal sepsis remains an important clinical syndrome despite advances in neonatology. Current hematology analyzers can determine cell volume (V), conductivity for internal composition of cell (C) and light scatter for cytoplasmic granularity and nuclear structure (S), and standard deviations which are effective in the diagnosis of sepsis. Statistical models can be used to strengthen the diagnosis. Effective modeling of molecular activity (EMMA) uses combinatorial algorithm of the selection parameters for regression equation based on modified stepwise procedure. It allows obtaining different regression models with different combinations of parameters. We investigated these parameters in screening of neonatal sepsis. We used LH780 hematological analyzer (Beckman Coulter, Fullerton, CA, USA). We combined these parameters with interleukin-6 (IL-6) and C-reactive protein (CRP) and developed models by EMMA. A total of 304 newborns, 76 proven sepsis, 130 clinical sepsis and 98 controls, were enrolled in the study. Mean neutrophil volume (MNV) and volume distribution width (VDW) were higher in both proven and clinical sepsis groups. We developed three models using MNV, VDW, IL-6, and CRP. These models gave more sensitivity and specificity than the usage of each marker alone. We suggest to use the combination of MNV and VDW with markers such as CRP and IL-6, and use diagnostic models created by EMMA. © 2012 Blackwell Publishing Ltd.

  9. Incremental cost of conducting population-based prevalence surveys for a neglected tropical disease: the example of trachoma in 8 national programs.

    Directory of Open Access Journals (Sweden)

    Chaoqun Chen

    2011-03-01

    Full Text Available Trachoma prevalence surveys provide the evidence base for district and community-wide implementation of the SAFE strategy, and are used to evaluate the impact of trachoma control interventions. An economic analysis was performed to estimate the cost of trachoma prevalence surveys conducted between 2006 and 2010 from 8 national trachoma control programs in Africa.Data were collected retrospectively from reports for 165 districts surveyed for trachoma prevalence using a cluster random sampling methodology in Ethiopia, Ghana, Mali, Niger, Nigeria, Sudan, Southern Sudan and The Gambia. The median cost per district survey was $4,784 (inter-quartile range [IQR] = $3,508-$6,650 while the median cost per cluster was $311 (IQR = $119-$393. Analysis by cost categories (personnel, transportation, supplies and other and cost activity (training, field work, supervision and data entry revealed that the main cost drivers were personnel and transportation during field work.Population-based cluster random surveys are used to provide the evidence base to set objectives and determine when elimination targets have been reached for several neglected tropical diseases, including trachoma. The cost of conducting epidemiologically rigorous prevalence surveys should not be a barrier to program implementation or evaluation.

  10. Preventing conduct problems and improving school readiness: evaluation of the Incredible Years Teacher and Child Training Programs in high-risk schools.

    Science.gov (United States)

    Webster-Stratton, Carolyn; Jamila Reid, M; Stoolmiller, Mike

    2008-05-01

    School readiness, conceptualized as three components including emotional self-regulation, social competence, and family/school involvement, as well as absence of conduct problems play a key role in young children's future interpersonal adjustment and academic success. Unfortunately, exposure to multiple poverty-related risks increases the odds that children will demonstrate increased emotional dysregulation, fewer social skills, less teacher/parent involvement and more conduct problems. Consequently intervention offered to socio-economically disadvantaged populations that includes a social and emotional school curriculum and trains teachers in effective classroom management skills and in promotion of parent-school involvement would seem to be a strategic strategy for improving young children's school readiness, leading to later academic success and prevention of the development of conduct disorders. This randomized trial evaluated the Incredible Years (IY) Teacher Classroom Management and Child Social and Emotion curriculum (Dinosaur School) as a universal prevention program for children enrolled in Head Start, kindergarten, or first grade classrooms in schools selected because of high rates of poverty. Trained teachers offered the Dinosaur School curriculum to all their students in bi-weekly lessons throughout the year. They sent home weekly dinosaur homework to encourage parents' involvement. Part of the curriculum involved promotion of lesson objectives through the teachers' continual use of positive classroom management skills focused on building social competence and emotional self-regulation skills as well as decreasing conduct problems. Matched pairs of schools were randomly assigned to intervention or control conditions. Results from multi-level models on a total of 153 teachers and 1,768 students are presented. Children and teachers were observed in the classrooms by blinded observers at the beginning and the end of the school year. Results indicated that

  11. Memory programming of TiO{sub 2−x} films by Conductive Atomic Force Microscopy evidencing filamentary resistive switching

    Energy Technology Data Exchange (ETDEWEB)

    Bousoulas, P., E-mail: panbous@mail.ntua.gr [Department of Applied Physics, National Technical University of Athens, Iroon Polytechniou 9 Zografou, 15780 Athens (Greece); Giannopoulos, J. [Department of Applied Physics, National Technical University of Athens, Iroon Polytechniou 9 Zografou, 15780 Athens (Greece); Giannakopoulos, K.; Dimitrakis, P. [Institute of Nanoscience and Nanotechnology, NCSR “Demokritos”, Aghia Paraskevi, 15310 Athens (Greece); Tsoukalas, D. [Department of Applied Physics, National Technical University of Athens, Iroon Polytechniou 9 Zografou, 15780 Athens (Greece)

    2015-03-30

    Highlights: • We correlate RRAM performance with C-AFM measurements. • We demonstrate resistive switching through C-AFM process. • We present evidence of filament formation. • We demonstrate resistive switching in nanoscale area. - Abstract: Resistive Random Access Memory (RRAM) with a structure Au/Ti/TiO{sub 2−x}/Au demonstrated a clear bipolar resistive switching behavior without the necessity of an initial electroforming process. The titanium oxide (TiO{sub 2−x}) thin film was deposited by reactive RF magnetron sputtering at room temperature in a controlled oxygen/argon ambient. The high density of oxygen vacancies within the film (induced by the low oxygen content) is an essential component for the formation of conducting filaments and demonstration of DC or nanosecond pulsed resistance switching, but also impose limitations for the conduction behavior of the high resistance state. Conductive Atomic Force Microscopy (C-AFM) was then employed in order to investigate the nanoscale electrical properties of our device. In situ current distribution during the SET process disclosed possible formation of conducting filaments while DC sweeping bias voltage revealed an OFF/ON switching ratio of about 200. We have also demonstrated that by using C-AFM both a low resistance state and a high resistance state can be written by bipolar voltage application imaged by corresponding patterns on the TiO{sub 2−x} current image, suggesting that oxygen ions movement at the Pt-Ir coated tip/TiO{sub 2−x} interface plays a critical role in the resistive switching phenomenon and thus correlating the macroscopic characteristics of our device with its microscopic origins. Nanoscale resistance switching is also demonstrated by programming distinct patterns on the device's current image.

  12. Results of the 2008/2009 Knowledge and Opinions Surveys Conducted for the U.S. Department of Energy Hydrogen Program

    Energy Technology Data Exchange (ETDEWEB)

    Schmoyer, Richard L [ORNL; Truett, Lorena Faith [ORNL; Cooper, Christy [U.S. Department of Energy; Chew, Andrea [U.S. Department of Energy

    2010-04-01

    The U.S. Department of Energy (DOE) Fuel Cell Technologies Program (FCT) conducts comprehensive efforts to enable the widespread commercialization of fuel cells in diverse sectors of the economy - with emphasis on applications that will most effectively strengthen our nation's energy security and improve our stewardship of the environment. Expanding the use of fuel cells requires a sustained education effort to lay the foundation for future commercial market introduction. The FCT education subprogram seeks to facilitate fuel cell demonstrations and support future commercialization by providing technically accurate and objective information to key target audiences both directly and indirectly involved in the use of fuel cells today. These key target audiences include a public that is familiar and comfortable with using a new fuel, state and local government officials who understand the near-term realities and long-term potential of the technology, an educated business and industry component, and trained safety and codes officials. With this in mind, the DOE FCT program established an education key activity to address the training and informational needs of target audiences that have a role in the near-term transition and the long-term development of a hydrogen economy. Whether or not changes can be attributed to the program, designing and maintaining an effective education program entails measuring baseline awareness and periodically measuring what has been learned. The purpose of this report is to document the data and results of statistical surveys undertaken in 2008 and 2009 to measure and establish changes in understanding and awareness about hydrogen and fuel cell technologies since a baseline survey was conducted in 2004. This report is essentially a data book, a digest of the survey data and an exposition of changes in knowledge of and opinions about hydrogen and fuel cell technology since 2004. Many conclusions can be made from the survey data. However

  13. Conduct disorder

    Science.gov (United States)

    ... Conduct disorder is often linked to attention-deficit disorder . Conduct disorder also can be an early sign of ... child or teen has a history of conduct disorder behaviors. A physical examination and blood tests can help ...

  14. Management program of cables and electrical conductions in operating nuclear power plant; Programa de gestion de cables y conducciones electricas en C. N. en Operacion

    Energy Technology Data Exchange (ETDEWEB)

    Perez Pereira, J.

    2012-07-01

    The management of cables and electrical conductions of a nuclear power plant is an activity very important during making the original design and subsequent design modifications, by the cable volume and nuclear safety regulations. During the design and construction of the Nuclear Power Plants, the late XX century, this work was carried out using manual procedures. The introduction of new technology provides users the ability to create relational databases for data according to the needs. Also tools and IT programs develop for the management of these databases with more reliability and a major number of possibilities at the moment of handling the available information. This paper aims to expose advances and developments in this field and present the methodology and lessons learned.

  15. Moderating effects of parental well-being on parenting efficacy outcomes by intervention delivery model of the early risers conduct problems prevention program.

    Science.gov (United States)

    Piehler, Timothy F; Lee, Susanne S; Bloomquist, Michael L; August, Gerald J

    2014-10-01

    Parent-focused preventive interventions for youth conduct problems are efficacious when offered in different models of delivery (e.g., individual in-home, group center-based). However, we know little about the characteristics of parents associated with a positive response to a particular model of delivery. We randomly assigned the parents of an ethnically diverse sample of kindergarten through second grade students (n = 246) displaying elevated levels of aggression to parent-focused program delivery models emphasizing receiving services in a community center largely with groups (Center; n = 121) or receiving services via an individualized in-home strategy (Outreach; n = 125). In both delivery models, parents received parent skills training and goal setting/case management/referrals over an average of 16 months. Structural equation modeling revealed a significant interaction between parental well-being at baseline and intervention delivery model in predicting parenting efficacy at year 2, while controlling for baseline levels of parenting efficacy. Within the Outreach model, parents with lower levels of well-being as reported at baseline appeared to show greater improvements in parenting efficacy than parents with higher levels of well-being. Within the Center model, parental well-being did not predict parenting efficacy outcomes. The strong response of low well-being parents within the Outreach model suggests that this may be the preferred model for these parents. These findings provide support for further investigation into tailoring delivery model of parent-focused preventive interventions using parental well-being in order to improve parenting outcomes.

  16. Moderating Effects of Parental Well-Being on Parenting Efficacy Outcomes by Intervention Delivery Model of the Early Risers Conduct Problems Prevention Program

    Science.gov (United States)

    Piehler, Timothy F.; Lee, Susanne S.; Bloomquist, Michael L.; August, Gerald J.

    2014-01-01

    Parent-focused preventive interventions for youth conduct problems are efficacious when offered in different models of delivery (e.g., individual in-home, group center-based). However, we know little about the characteristics of parents associated with a positive response to a particular model of delivery. We randomly assigned the parents of an ethnically diverse sample of kindergarten through second grade students (n = 246) displaying elevated levels of aggression to parent-focused program delivery models emphasizing receiving services in a community center largely with groups (Center; n = 121) or receiving services via an individualized in-home strategy (Outreach; n = 125). In both delivery models, parents received parent skills training and goal setting/case management/referrals over an average of 16 months. Structural equation modeling revealed a significant interaction between parental well-being at baseline and intervention delivery model in predicting parenting efficacy at year two, while controlling for baseline levels of parenting efficacy. Within the Outreach model, parents with lower levels of well-being as reported at baseline appeared to show greater improvements in parenting efficacy than parents with higher levels of well-being. Within the Center model, parental well-being did not predict parenting efficacy outcomes. The strong response of low well-being parents within the Outreach model suggests that this may be the preferred model for these parents. These findings provide support for further investigation into tailoring delivery model of parent-focused preventive interventions using parental well-being in order to improve parenting outcomes. PMID:25037843

  17. Numerical Solution of the Electron Heat Transport Equation and Physics-Constrained Modeling of the Thermal Conductivity via Sequential Quadratic Programming Optimization in Nuclear Fusion Plasmas

    Science.gov (United States)

    Paloma, Cynthia S.

    The plasma electron temperature (Te) plays a critical role in a tokamak nu- clear fusion reactor since temperatures on the order of 108K are required to achieve fusion conditions. Many plasma properties in a tokamak nuclear fusion reactor are modeled by partial differential equations (PDE's) because they depend not only on time but also on space. In particular, the dynamics of the electron temperature is governed by a PDE referred to as the Electron Heat Transport Equation (EHTE). In this work, a numerical method is developed to solve the EHTE based on a custom finite-difference technique. The solution of the EHTE is compared to temperature profiles obtained by using TRANSP, a sophisticated plasma transport code, for specific discharges from the DIII-D tokamak, located at the DIII-D National Fusion Facility in San Diego, CA. The thermal conductivity (also called thermal diffusivity) of the electrons (Xe) is a plasma parameter that plays a critical role in the EHTE since it indicates how the electron temperature diffusion varies across the minor effective radius of the tokamak. TRANSP approximates Xe through a curve-fitting technique to match experimentally measured electron temperature profiles. While complex physics-based model have been proposed for Xe, there is a lack of a simple mathematical model for the thermal diffusivity that could be used for control design. In this work, a model for Xe is proposed based on a scaling law involving key plasma variables such as the electron temperature (Te), the electron density (ne), and the safety factor (q). An optimization algorithm is developed based on the Sequential Quadratic Programming (SQP) technique to optimize the scaling factors appearing in the proposed model so that the predicted electron temperature and magnetic flux profiles match predefined target profiles in the best possible way. A simulation study summarizing the outcomes of the optimization procedure is presented to illustrate the potential of the

  18. Electrical Conductivity.

    Science.gov (United States)

    Hershey, David R.; Sand, Susan

    1993-01-01

    Explains how electrical conductivity (EC) can be used to measure ion concentration in solutions. Describes instrumentation for the measurement, temperature dependence and EC, and the EC of common substances. (PR)

  19. Conduct disorders

    NARCIS (Netherlands)

    Buitelaar, J.K.; Smeets, K.C.; Herpers, P.; Scheepers, F.; Glennon, J.; Rommelse, N.N.J.

    2013-01-01

    Conduct disorder (CD) is a frequently occurring psychiatric disorder characterized by a persistent pattern of aggressive and non-aggressive rule breaking antisocial behaviours that lead to considerable burden for the patients themselves, their family and society. This review paper updates diagnostic

  20. Conduction apraxia.

    Science.gov (United States)

    Ochipa, C; Rothi, L J; Heilman, K M

    1994-01-01

    A left hemisphere damaged patient with ideomotor apraxia is described, whose performance on pantomime to verbal command was superior to pantomime imitation. His reception of these same gestures (gesture naming) was spared. This syndrome has been named conduction apraxia. To account for this selective impaired performance on gesture imitation, a separation of the representations for gesture production and reception is proposed and a non-lexical gesture processing route for gesture imitation is suggested. Images PMID:7931387

  1. Conduction apraxia.

    OpenAIRE

    Ochipa, C; Rothi, L J; Heilman, K M

    1994-01-01

    A left hemisphere damaged patient with ideomotor apraxia is described, whose performance on pantomime to verbal command was superior to pantomime imitation. His reception of these same gestures (gesture naming) was spared. This syndrome has been named conduction apraxia. To account for this selective impaired performance on gesture imitation, a separation of the representations for gesture production and reception is proposed and a non-lexical gesture processing route for gesture imitation is...

  2. Incredible Years Parent, Teachers and Children's Series: Transportability to Portugal of Early Intervention Programs for Preventing Conduct Problems and Promoting Social and Emotional Competence

    Directory of Open Access Journals (Sweden)

    Carolyn Webster-Stratton

    2012-07-01

    Full Text Available Disruptive behavior disorders in children are on the increase. However, there is evidence that the younger a child is at the time of intervention, the more positive the behavioral effects on his/her adjustment at home and at school. Parental education might be an effective way of addressing early problems. The Incredible Years (IY programs were designed to prevent and treat behavior problems when they first appear (in infancy-toddlerhood through middle childhood and to intervene in multiple areas through parent, teacher, and child training. This paper summarizes the literature demonstrating the impact of the IY parent, teacher and child intervention programs, and describes in more detail the work done in Portugal so far to disseminate IY programs with fidelity, with particular emphasis on the IY Basic Preschool Parenting and Teacher Classroom Management programs.

  3. On-Going International Research Program on Irradiated Concrete Conducted by DOE, EPRI and Japan Research Institutions. Roadmap, Achievements and Path Forward

    Energy Technology Data Exchange (ETDEWEB)

    Le Pape, Yann [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Rosseel, Thomas M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-10-01

    The Joint Department of Energy (DOE)-Electric Power Research Institute (EPRI) Program (Light Water Reactor Sustainability (LWRS) Program–Material Pathway–Concrete and Long-Term Operation (LTO) Program) and US Nuclear Regulatory Commission (NRC) research studies aim at understanding the most prominent degradation modes and their effects on the long-term operation of concrete structures to nuclear power generation. Based on the results of the Expanded Materials Degradation Analysis (EMDA), (NUREG/CR-7153, ORNL/TM-2011/545), irradiated concrete and alkali-silica reaction (ASR)-affected concrete structures are the two prioritized topics of on-going research. This report focuses specifically on the topic of irradiated concrete and summarizes the main accomplishments obtained by this joint program, but also provides an overview of current relevant activities domestically and internationally. Possible paths forward are also suggested to help near-future orientation of this program.

  4. Conductivity Probe

    Science.gov (United States)

    2008-01-01

    The Thermal and Electrical Conductivity Probe (TECP) for NASA's Phoenix Mars Lander took measurements in Martian soil and in the air. The needles on the end of the instrument were inserted into the Martian soil, allowing TECP to measure the propagation of both thermal and electrical energy. TECP also measured the humidity in the surrounding air. The needles on the probe are 15 millimeters (0.6 inch) long. The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  5. Conducted Vasoreactivity

    DEFF Research Database (Denmark)

    Postnov, D. E.; Neganova, A Y; Sosnovtseva, Olga

    2015-01-01

    , the underlying mechanisms are debated. Here, we focus on dynamical aspects of the problem hypothesizing the existence of a bistability-powered mechanism for regenerative pulse transmission along the endothelium. Bistability implies that the cell can have two different stable resting potentials and can switch......Conducted vasodilation is part of the physiological response to increasing metabolic demand of the tissue. Similar responses can be elicited by focal electrical or chemical stimulation. Some evidence suggests an endothelial pathway for nondecremental transmission of hyperpolarizing pulses. However...... a theoretical analysis as well as numerical simulations of both single- and multiunit bistable systems mimicking endothelial cells to investigate the self-consistence and stability of the proposed mechanism. We find that the individual cell may switch readily between two stable potentials. An array of coupled...

  6. Preventing Conduct Problems and Improving School Readiness: Evaluation of the Incredible Years Teacher and Child Training Programs in High-Risk Schools

    Science.gov (United States)

    Webster-Stratton, Carolyn; Reid, M. Jamila; Stoolmiller, Mike

    2008-01-01

    Background: School readiness, conceptualized as three components including emotional self-regulation, social competence, and family/school involvement, as well as absence of conduct problems play a key role in young children's future interpersonal adjustment and academic success. Unfortunately, exposure to multiple poverty-related risks increases…

  7. [Conduct disorders].

    Science.gov (United States)

    Stadler, Christina

    2014-05-01

    The diagnosis conduct disorder (CD) is characterized by aggressive (e.g., physical aggression) as well as nonaggressive symptoms (e.g., violation of rules, truancy). Conclusions regarding the course and prognosis, or recommendations for effective interventions, seem not to be equally valid for the whole patient group. DSM-IV-TR included subtyping age-of-onset as a prognostic criterion, even though the evidence base for subtyping from age of onset was rather sparse. The relevant literature on CD has grown substantially since the publication of DSM-IV-TR in 1994. For the new DSM-5 edition, some important issues were discussed, for example, consideration of personality traits, female-specific or dimensional criteria, and adding a childhood-limited subtype (Moffitt et al., 2008). Nevertheless, the diagnostic protocol for CD was not changed in the most parts in the new edition of the DSM-5; the addition of a CD specifier with limited emotions is the most relevant change. On the basis of the existing evidence base, this review discusses whether the modifications in DSM-5 are helpful for fulfilling the requirements of a reliable and valid psychiatric classification.

  8. The Role of Logic Modeling in a Collaborative and Iterative Research Process: Lessons from Research and Analysis Conducted with the Federal Voting Assistance Program

    Science.gov (United States)

    2016-01-01

    management system MOVE Act Military and Overseas Voter Empowerment Act MPSA Military Postal Service Agency NIST National Institute of Standards and...are the users or targets of the outputs. • Outcomes (intermediate or end) are the changes that occur and the benefits that result from the program...Voter Empowerment . DoDD = DoD directive. DoDI = DoD instruction. DOS = U.S. Department of State. IG = inspector general. GAO = U.S. Government

  9. Results of the 2008/2009 Knowledge and Opinions Surveys Conducted for the U.S. Department of Energy Hydrogen Program

    Energy Technology Data Exchange (ETDEWEB)

    Schmoyer, R. L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Truett, Tykey [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Cooper, Christy [Dept. of Energy (DOE), Washington DC (United States); Chew, Andrea [Dept. of Energy (DOE), Washington DC (United States)

    2010-04-01

    This report presents results of a 2008/2009 survey of hydrogen and fuel cell awareness conducted for the U.S. Department of Energy (DOE). The 2008/2009 survey follows up on a similar DOE survey conducted in 2004, measuring levels of awareness and understanding of hydrogen and fuel cell technologies in four populations: (1) the general public, (2) students, (3) personnel in state and local governments, and (4) potential end users of hydrogen and fuel cell technologies in business and industry. The 2008/2009 survey includes these four groups and adds a fifth group, safety and code officials. The same survey methods were used for both surveys; the 2008/2009 survey report includes a comparison of 2004 and 2008/2009 findings. Information from these surveys will be used to enhance hydrogen and fuel cell education strategies.

  10. An Analysis of Entrepreneurship Aspects of Current Training Programs Conducted on Practicing Micro and Small Enterprises (MSEs): A Case Study of Roysambu

    OpenAIRE

    Joram Ng’ang’a Nyambura

    2014-01-01

    This study sought to analyze entrepreneurial aspects of current training methods administered to micro and small enterprises (MSEs) in Roysambu. More specifically, the study aimed at understanding the mode of training conducted to MSEs within Roysambu (a suburb in Nairobi) in an effort to increase its entrepreneurial aspects. Descriptive research design was employed and the population was sampled through stratified random sampling. Structured questionnaires and observation schedules were used...

  11. Impact of a Pharmacist Conducted Educational Program on Human Papilloma Virus Vaccination Rates in a Low Socioeconomic Population in the City of Lares, PR.

    Science.gov (United States)

    Jiménez-Quiñones, Edda Marie; Melin, Kyle; Jiménez-Ramírez, Francisco Javier

    2017-06-01

    To observe whether local vaccination rates are improved by a patient and physician education program on the human papillomavirus (HPV) vaccine in Farmacia San José, Lares. According to the Puerto Rico Immunization Registry, the HPV vaccine is currently underutilized. Patients within the ages of 18 and 26 years who are current patients of Farmacia San José were contacted by phone and approached in person at the pharmacy. Once contacted, patients were provided with educational materials and counseling regarding the risks and benefits of HPV vaccination. The primary outcome for this study is HPV vaccination rates at 4 months after starting the educational program. Only 79 of the 200 attempted patients who were candidates to receive the HPV vaccine were able to be reached by phone. Out of 79 patients, 24 reported they had previously been vaccinated against HPV. After all educational efforts, 4 patients (all insured by government) received vaccination against HPV at the pharmacy. In addition, 16 physicians near the pharmacy were contacted and visited by the pharmacist resident. The physicians agreed to receive educational information regarding the ACIP recommendations for their patients. Although the total number of HPV vaccination administered at the pharmacy during the study period was low, we found an individual patient counseling approach to be much more successful than attempting to coordinate group educational interventions.

  12. Analysis of single-hole and cross-hole tracer tests conducted at the Nye County early warning drilling program well complex, Nye County, Nevada

    Science.gov (United States)

    Umari, A.; Earle, J.D.; Fahy, M.F.

    2006-01-01

    As part of the effort to understand the flow and transport characteristics downgradient from the proposed high-level radioactive waste geologic repository at Yucca Mountain, Nevada, single- and cross-hole tracer tests were conducted from December 2004 through October 2005 in boreholes at the Nye County 22 well complex. The results were analyzed for transport properties using both numerical and analytical solutions of the governing advection dispersion equation. Preliminary results indicate effective flow porosity values ranging from 1.0 ?? 10-2 for an individual flow path to 2.0 ?? 10 -1 for composite flow paths, longitudinal dispersivity ranging from 0.3 to 3 m, and a transverse horizontal dispersivity of 0.03 m. Individual flow paths identified from the cross-hole testing indicate some solute diffusion into the stagnant portion of the alluvial aquifer.

  13. Individual Reactions of Permanganate and Various Reductants - Student Report to the DOE ERULF Program for Work Conducted May to July 2000

    Energy Technology Data Exchange (ETDEWEB)

    Gauger, Amber M.; Hallen, Richard T.

    2012-09-15

    Tank waste on the Hanford Site contains radioactive elements that need to be removed from solution prior to disposal. One effective way to do this is to precipitate the radioactive elements with manganese solids, produced by permanganate oxidation. When added to tank waste, the permanganate reacts quickly producing manganese (IV) dioxide precipitate. Because of the speed of the reaction it is difficult to tell what exactly is happening. Individual reactions using non-radioactive reductants found in the tanks were done to determine reaction kinetics, what permanganate was reduced to, and what oxidation products were formed. In this project sodium formate, sodium nitrite, glycolic acid, glycine, and sodium oxalate were studied using various concentrations of reductant in alkaline sodium hydroxide solutions. It was determined that formate reacted the quickest, followed by glycine and glycolic acid. Oxalate and nitrite did not appear to react with the permanganate solutions. The products of the oxidation reaction were examined. Formate was oxidized to carbonate and water. Glycolic acid was oxidized slower producing oxalate and water. Glycine reactions formed some ammonia in solution, oxalate, and water. The research reported by Amber Gauger in this report was part of a DOE ERULF student intern program at Pacific Northwest National Laboratory under the direction of Richard Hallen in the summer of 2000.

  14. Heat conduction in three dimensions

    Science.gov (United States)

    Danza, T. M.; Fesler, L. W.; Mongan, R. D.

    1980-01-01

    Multidimensional heat conduction program computes transient temperature history and steady state temperatures of complex body geometries in three dimensions. Emphasis is placed on type of problems associated with Space Shuttle thermal protection system, but program could be used in thermal analysis of most three dimensional systems.

  15. Heat conduction in three dimensions

    Science.gov (United States)

    Danza, T. M.; Fesler, L. W.; Mongan, R. D.

    1980-01-01

    Multidimensional heat conduction program computes transient temperature history and steady state temperatures of complex body geometries in three dimensions. Emphasis is placed on type of problems associated with Space Shuttle thermal protection system, but program could be used in thermal analysis of most three dimensional systems.

  16. TARGETED TECHNOLOGY TRANSFER TO US INDEPENDENTS

    Energy Technology Data Exchange (ETDEWEB)

    Donald F. Duttlinger; E. Lance Cole

    2005-01-01

    The Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of assisting U.S. independent oil and gas producers with timely, informed technology decisions during Fiscal Year 2004 (FY04). PTTC has active grassroots programs through its 10 Regional Lead Organizations (RLOs) and 2 satellite offices. They bring research and academia to the table via their association with geological surveys and engineering departments. The regional directors interact with independent oil and gas producers through technology workshops, resource centers, websites, newsletters, technical publications and other cooperative outreach efforts. PTTC's Headquarters (HQ) staff receives direction from a National Board of Directors predominantly comprised of American natural gas and oil producers to plan and manage the overall technology transfer program. PTTC HQ implements a comprehensive communications program by interconnecting the talents of the National Board, 10 Regional Producer Advisory Groups (PAG) and the RLOs with industry across the U.S. PTTC effectively combines federal funding through the Department of Energy's (DOE) Office of Fossil Energy, namely the Strategic Center for Natural Gas and Oil with state and industry contributions to share application of upstream technologies. Ultimately, these efforts factor in to provide a safe, secure and reliable energy supply for American consumers. This integrated resource base, combined with industry volunteers guiding PTTC's activities and the dedication of national and regional staff, are achieving notable results regarding domestic production figures. PTTC is increasingly recognized as a critical resource for information and access to technologies by providing direct contact with research, development and demonstration (RD&D) results. A key to the program is demonstrating proven technologies that can be applied broadly and rapidly. This technical progress report summarizes PTTC's accomplishments during

  17. TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS

    Energy Technology Data Exchange (ETDEWEB)

    Donald F. Duttlinger; E. Lance Cole

    2003-12-15

    The Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of assisting U.S. independent oil and gas producers to make timely, informed technology decisions. Functioning as a cohesive national organization, PTTC has active grassroots programs through its 10 Regional Lead Organizations (RLOs) and 3 Satellite Offices that encompass all of the oil- and natural gas-producing regions in the U.S. Active volunteer leadership from the Board and regional Producer Advisory Groups keeps activities focused on producer's needs. Technical expertise and personal networks of national and regional staff enable PTTC to deliver focused, technology-related information in a manner that is cost and time effective for independents. The organization effectively combines federal funding through the Department of Energy's (DOE) Office of Fossil Energy with matching state and industry funding, forming a unique partnership. This final report summarizes PTTC's accomplishments. In this final fiscal year of the contract, activities exceeded prior annual activity levels by significant percentages. Strategic planning implemented during the year is focusing PTTC's attention on changes that will bear fruit in the future. Networking and connections are increasing PTTC's sphere of influence with both producers and the service sector. PTTC's reputation for unbiased bottom-line information stimulates cooperative ventures. In FY03 PTTC's regions held 169 workshops, drawing 8,616 attendees. There were nearly 25,000 reported contacts. This represents a 38% increase in attendance and 34% increase in contacts as compared to FY02 activity. Repeat attendance at regional workshops, a measure of customer satisfaction and value received, remained strong at 50%. 39% of participants in regional workshops respond ''Yes'' on feedback forms when asked if they are applying technologies based on knowledge gained through PTTC. This feedback

  18. Targeted Technology Transfer to US Independents

    Energy Technology Data Exchange (ETDEWEB)

    E. Lance Cole

    2009-09-30

    The Petroleum Technology Transfer Council (PTTC) was established by domestic crude oil and natural gas producers, working in conjunction with the Independent Petroleum Association of America (IPAA), the U.S. Department of Energy (DOE) and selected universities, in 1994 as a national not-for-profit organization. Its goal is to transfer Exploration and Production (E&P) technology to the domestic upstream petroleum industry, in particular to the small independent operators. PTTC connects producers, technology providers and innovators, academia, and university/industry/government research and development (R&D) groups. From inception PTTC has received federal funding through DOE's oil and natural gas program managed by the National Energy Technology Laboratory (NETL). With higher funding available in its early years, PTTC was able to deliver well more than 100 workshops per year, drawing 6,000 or more attendees per year. Facing the reality of little or no federal funding in the 2006-2007 time frame, PTTC and the American Association of Petroleum Geologists (AAPG) worked together for PTTC to become a subsidiary organization of AAPG. This change brings additional organizational and financial resources to bear for PTTC's benefit. PTTC has now been 'powered by AAPG' for two full fiscal years. There is a clear sense that PTTC has stabilized and is strengthening its regional workshop and national technology transfer programs and is becoming more entrepreneurial in exploring technology transfer opportunities beyond its primary DOE contract. Quantitative accomplishments: PTTC has maintained its unique structure of a national organization working through Regional Lead Organizations (RLOs) to deliver local, affordable workshops. During the contract period PTTC consolidated from 10 to six regions efficiency and alignment with AAPG sections. The number of workshops delivered by its RLOs during the contract period is shown below. Combined attendance over the

  19. Effectiveness of the “What’s Up!” Intervention to Reduce Stigma and Psychometric Properties of the Youth Program Questionnaire (YPQ: Results from a Cluster Non-randomized Controlled Trial Conducted in Catalan High Schools

    Directory of Open Access Journals (Sweden)

    Laura Andrés-Rodríguez

    2017-09-01

    Full Text Available Mental disorders are highly prevalent in the general population, and people who experience them are frequently stigmatized. Stigma has a very negative impact on social, academic/professional, and personal life. Considering the high rates of mental disorders among children and adolescents (13.4% and how critical this age is in the formation of nuclear beliefs, many campaigns to combat stigma have been developed in the last decade, with mixed results. The OBERTAMENT initiative has produced various anti-stigma campaigns in Catalonia (Spain. In the present study, the main objective was to report on the effectiveness of the OBERTAMENT “What’s up!” intervention, a curricular intervention including education and social contact conducted by the teachers in the classroom with teenagers aged between 14 and 18. Prior to this, we examined the psychometric properties of the Youth Program Questionnaire (YPQ, our main outcome measure, in terms of dimensionality, reliability, and validity. A cluster non-randomized controlled trial was conducted to assess this intervention, which was tested in nine high schools situated in the Barcelona region. A convenience sample of 261 students formed the intervention group and 132 the control group (52% women, mean age = 14, SD = 0.47. The assignment to study conditions was conducted by Departament d’Ensenyament (Department of Education, Generalitat de Catalunya (Catalan Government. Participants were evaluated at baseline, post-intervention, and 9-month follow-up. The main outcome measure of this study was the YPQ. The Reported and Intended Behavior Scale (RIBS was used as secondary outcome measure. The statistical analysis indicated that the YPQ possesses a two-factor structure (stereotypical attitudes and intended behavior and sound psychometric properties. The multilevel mixed-effects models revealed statistically significant interactions for both study measures and post hoc intragroup analyses revealed a

  20. Multidimensional Heat Conduction

    DEFF Research Database (Denmark)

    Rode, Carsten

    1998-01-01

    Analytical theory of multidimensional heat conduction. General heat conduction equation in three dimensions. Steay state, analytical solutions. The Laplace equation. Method of separation of variables. Principle of superposition. Shape factors. Transient, multidimensional heat conduction....

  1. Conductivity Measurements of Silverpastes

    Directory of Open Access Journals (Sweden)

    M. Dirix

    2010-01-01

    Full Text Available The development of three-dimensional printed circuit boards requires research on new materials which can easily be deformed. Conducting pastes are well suited for deformation even after they are applied to the dielectric carrier. This paper deals with measurements of the electrical conductivity of these conducting pastes. Two different conductivity measurement techniques are explained and carried out. The resulting measurements give an overview of the conductivity of several measured samples.

  2. 7 CFR 97.157 - Professional conduct.

    Science.gov (United States)

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) COMMODITY LABORATORY TESTING PROGRAMS... appearing before the Office shall conform to the standards of ethical and professional conduct,...

  3. Conducting Polymeric Materials

    DEFF Research Database (Denmark)

    Hvilsted, Søren

    2016-01-01

    The overall objective of this collection is to provide the most recent developments within the various areas of conducting polymeric materials. The conductivity of polymeric materials is caused by electrically charged particles, ions, protons and electrons. Materials in which electrons...

  4. The Conductivity of Solutions.

    Science.gov (United States)

    Rayner-Canham, Geoff

    1993-01-01

    Presents historical background and modern explanations for the popular demonstration of showing conductivity of solutions through the insertion of a light-bulb conductivity tester into deionized water and water with salt in it. (PR)

  5. Limits of proton conductivity.

    Science.gov (United States)

    Kreuer, Klaus-Dieter; Wohlfarth, Andreas

    2012-10-15

    Parasitic current seems to be the cause for the "highest proton conductivity" of a material reported to date. Kreuer and Wohlfarth verify this hypothesis by measuring the conductivity of the same materials after preparing them in a different way. They further explain the limits of proton conductivity and comment on the problems of determining the conductivity of small objects (e.g., whiskers, see picture).

  6. Conducting polymer materials

    Directory of Open Access Journals (Sweden)

    Jovanović Slobodan M.

    2003-01-01

    Full Text Available Conducting polymers represent a very interesting group of polymer materials Investigation of the synthesis, structure and properties of these materials has been the subject of considerable research efforts in the last twenty years. A short presentating of newer results obtained by investigating of the synthesis, structure and properties of two basic groups of conducting polymers: a conducting polymers the conductivity of which is the result of their molecular structure, and b conducting polymer composites (EPC, is given in this paper. The applications and future development of this group of polymer materials is also discussed.

  7. Conduct Disorders: Are Boot Camps Effective?

    Science.gov (United States)

    Jeter, LaVaughn V.

    2010-01-01

    Youth diagnosed with "conduct disorder" are often placed in programs using forced compliance and coercive control. One type of intervention used to treat conduct disorder is the boot camp. The basic idea is that disruptive behaviors can be corrected by strict behavioral regulation and an emphasis on skills training (Weis & Toolis 2009; Weis,…

  8. 49 CFR 240.305 - Prohibited conduct.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Prohibited conduct. 240.305 Section 240.305 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Certification Programs § 240.305 Prohibited conduct. (a) It shall be unlawful to: (1) Operate a locomotive or...

  9. Student Conduct Board Manual and Reference

    Science.gov (United States)

    ACPA College Student Educators International, 2010

    2010-01-01

    This manual is designed for those working with conduct boards composed of students and/or faculty. This manual serves two purposes: (1) To provide the Adviser and/or trainer(s) with guidelines, philosophy, and information so as to better structure your conduct board program (or to create one); and (2) To serve as an actual model for a manual for a…

  10. Conduct Disorders: Are Boot Camps Effective?

    Science.gov (United States)

    Jeter, LaVaughn V.

    2010-01-01

    Youth diagnosed with "conduct disorder" are often placed in programs using forced compliance and coercive control. One type of intervention used to treat conduct disorder is the boot camp. The basic idea is that disruptive behaviors can be corrected by strict behavioral regulation and an emphasis on skills training (Weis & Toolis 2009; Weis,…

  11. Electrochemical Corrosion Studies in Low Conductivity Media

    Science.gov (United States)

    1990-11-01

    E.o (2) and the Tafel slopes: B - bbc/2.3(b + b,). (3) A Qomputer program has been devloped and tested earlier which allows simultaneous determinacion ...conductance of a solution made up of ions of high equivalent conductance, which is the case here. A Bode plot (log IZI vs log f) representation of

  12. Voltammetry of conducting polymers

    OpenAIRE

    Gulaboski, Rubin

    2014-01-01

    The search for new materials for enhancing electrical conductivity of various materials is one of the most active research areas today. Conducting polymers represent a unique class of organic materials that have been used in many applications such as bioelectronics, sensors, corrosion protection, electrocatalysis, and energy storage devices. Application of the conductive polymers in electrochemistry is almost inevitable in order to get better features of the voltammetric systems ...

  13. Graphene Conductance Uniformity Mapping

    DEFF Research Database (Denmark)

    Buron, Jonas Christian Due; Petersen, Dirch Hjorth; Bøggild, Peter

    2012-01-01

    We demonstrate a combination of micro four-point probe (M4PP) and non-contact terahertz time-domain spectroscopy (THz-TDS) measurements for centimeter scale quantitative mapping of the sheet conductance of large area chemical vapor deposited graphene films. Dual configuration M4PP measurements......, demonstrated on graphene for the first time, provide valuable statistical insight into the influence of microscale defects on the conductance, while THz-TDS has potential as a fast, non-contact metrology method for mapping of the spatially averaged nanoscopic conductance on wafer-scale graphene with scan times......, dominating the microscale conductance of the investigated graphene film....

  14. Electrically conductive cellulose composite

    Science.gov (United States)

    Evans, Barbara R.; O'Neill, Hugh M.; Woodward, Jonathan

    2010-05-04

    An electrically conductive cellulose composite includes a cellulose matrix and an electrically conductive carbonaceous material incorporated into the cellulose matrix. The electrical conductivity of the cellulose composite is at least 10 .mu.S/cm at 25.degree. C. The composite can be made by incorporating the electrically conductive carbonaceous material into a culture medium with a cellulose-producing organism, such as Gluconoacetobacter hansenii. The composites can be used to form electrodes, such as for use in membrane electrode assemblies for fuel cells.

  15. Gifted Program Evaluation

    Science.gov (United States)

    Neumeister, Kristie Speirs; Burney, Virginia Hays

    2012-01-01

    Faced with significant budget challenges, many districts cannot afford to hire an outside consultant to conduct a formal evaluation of their gifted programs. As an interim solution, districts may wish to conduct their own in-house program evaluation. "Gifted Program Evaluation: A Handbook for Administrators and Coordinators" is designed to assist…

  16. Targeted Technology Transfer to US Independents

    Energy Technology Data Exchange (ETDEWEB)

    Donald F. Duttlinger; E. Lance Cole

    2006-09-29

    The Petroleum Technology Transfer Council (PTTC) was established by domestic crude oil and natural gas producers in 1994 as a national not-for-profit organization to address the increasingly urgent need to improve the technology-transfer process in the U.S. upstream petroleum industry. Coordinated from a Headquarters (HQ) office in Houston, PTTC maintains an active grassroots program executed by 10 Regional Lead Organizations (RLOs) and two satellite offices (Figure 1). Regional Directors interact with domestic oil and gas producers through technology workshops, resource centers, websites, newsletters, technical publications and cooperative outreach efforts. HQ facilitates inter-regional technology transfer and implements a comprehensive communications program. Active volunteers on the National Board and in Producer Advisory Groups (PAGs) in each of the 10 regions focus effort in areas that will create the most impact for domestic producers. Focused effort by dedicated individuals across the country has enabled PTTC to achieve the milestones outlined in Appendix A.

  17. Is Conductive Education Transplantable?

    Science.gov (United States)

    Bairstow, Phillip; Cochrane, Raymond

    1993-01-01

    This article highlights difficulties in replicating the Andras Peto Institute for Motor Disorders in Hungary by establishing the Birmingham (England) Institute for Conductive Education, for children with cerebral palsy. Difficulties included a lack of conductive education principles in clear English, failure to properly identify children who could…

  18. Conductive fabric seal

    Energy Technology Data Exchange (ETDEWEB)

    Livesay, Ronald Jason; Mason, Brandon William; Kuhn, Michael Joseph; Rowe, Nathan Carl

    2017-04-04

    Disclosed are several examples of a system and method for detecting if an article is being tampered with. Included is a covering made of a substrate that is coated with a layer of an electrically conductive material that forms an electrically conductive surface having an electrical resistance. The covering is configured to at least partially encapsulate the article such that the article cannot be tampered with, without modifying the electrical resistance of the electrically conductive surface of the covering. A sensing device is affixed to the electrically conductive surface of the covering and the sensing device monitors the condition of the covering by producing a signal that is indicative of the electrical resistance of the electrically conductive surface of the covering. A measured electrical resistance that differs from a nominal electrical resistance is indicative of a covering that is being tampered with and an alert is communicated to an observer.

  19. Electrically Conducting Polymers.

    Science.gov (United States)

    1983-04-07

    polypyrrole, the oxidized polythiophene is also unstable in air. A rather different class of conducting polymers lies outside the scope of this review but...AD-A129 488 ELECTRICALLY CONDUCTING POLYNERS(U) IBM RESEARCH LAB / SAN JOSE CA W D GILL ET RL. 97 APR 83 TR-B UNCLASSIFIED F/G 7/3 N I Ihhhhhhhhhhhhl...00 Contract N00014-80-C-0779 Technical Report No. 8 *Electrically Conducting Polymers by W. D. Gill, T. C. Clarke, and G. B. Street Prepared for

  20. Conductive open frameworks

    Science.gov (United States)

    Yaghi, Omar M.; Wan, Shun; Doonan, Christian J.; Wang, Bo; Deng, Hexiang

    2016-02-23

    The disclosure relates generally to materials that comprise conductive covalent organic frameworks. The disclosure also relates to materials that are useful to store and separate gas molecules and sensors.

  1. Conductivities from attractors

    CERN Document Server

    Erdmenger, Johanna; Goulart, Prieslei; Witkowski, Piotr

    2016-01-01

    In the context of applications of the AdS/CFT correspondence to condensed matter physics, we compute conductivities for field theory duals of dyonic planar black holes in 3+1-dimensional Einstein-Maxwell-dilaton theories at zero temperature. We combine the near-horizon data obtained via Sen's entropy function formalism with known expressions for conductivities. In this way we express the conductivities in terms of the extremal black hole charges. We apply our approach to three different examples for dilaton theories for which the background geometry is not known explicitly. For a constant scalar potential, the thermal conductivity explicitly scales as $\\alpha_{xy}\\sim N^{3/2}$, as expected.

  2. Nerve conduction velocity

    Science.gov (United States)

    ... to measure the speed of the nerve signals. Electromyography (recording from needles placed into the muscles) is ... Often, the nerve conduction test is followed by electromyography (EMG). In this test, needles are placed into ...

  3. Dissecting holographic conductivities

    CERN Document Server

    Davison, Richard A

    2015-01-01

    The DC thermoelectric conductivities of holographic systems in which translational symmetry is broken can be efficiently computed in terms of the near-horizon data of the dual black hole. By calculating the frequency dependent conductivities to the first subleading order in the momentum relaxation rate, we give a physical explanation for these conductivities in the simplest such example, in the limit of slow momentum relaxation. Specifically, we decompose each conductivity into the sum of a coherent contribution due to momentum relaxation and an incoherent contribution, due to intrinsic current relaxation. This decomposition is different from those previously proposed, and is consistent with the known hydrodynamic properties in the translationally invariant limit. This is the first step towards constructing a consistent theory of charged hydrodynamics with slow momentum relaxation.

  4. Nonequilibrium mesoscopic conductance fluctuations

    Science.gov (United States)

    Ludwig, T.; Blanter, Ya. M.; Mirlin, A. D.

    2004-12-01

    We investigate the amplitude of mesoscopic fluctuations of the differential conductance of a metallic wire at arbitrary bias voltage V . For noninteracting electrons, the variance ⟨δg2⟩ increases with V . The asymptotic large- V behavior is ⟨δg2⟩˜V/Vc (where eVc=D/L2 is the Thouless energy), in agreement with the earlier prediction by Larkin and Khmelnitskii. We find, however, that this asymptotics has a very small numerical prefactor and sets in at very large V/Vc only, which strongly complicates its experimental observation. This high-voltage behavior is preceded by a crossover regime, V/Vc≲30 , where the conductance variance increases by a factor ˜3 as compared to its value in the regime of universal conductance fluctuations (i.e., at V→0 ). We further analyze the effect of dephasing due to the electron-electron scattering on ⟨δg2⟩ at high voltages. With the Coulomb interaction taken into account, the amplitude of conductance fluctuations becomes a nonmonotonic function of V . Specifically, ⟨δg2⟩ drops as 1/V for voltages V≫gVc , where g is the dimensionless conductance. In this regime, the conductance fluctuations are dominated by quantum-coherent regions of the wire adjacent to the reservoirs.

  5. Impact of temperature and programming method on the data retention of Cu/Al2O3-based conductive-bridge RAM operated at low-current (10 μA)

    Science.gov (United States)

    Belmonte, A.; Fantini, A.; Redolfi, A.; Houssa, M.; Jurczak, M.; Goux, L.

    2016-11-01

    In this paper we outline the effects on the memory window of the programming method and pulse width and of the temperature, in Cu/Al2O3-based CBRAM targeting a 10-μA current regime. Despite its large median value, the overall HRS/LRS ratio in these devices can be drastically reduced due to the LRS and HRS dispersion and to the instability of the resistive states over time, especially in a low-current regime. For this reason, in this study we adopt a statistical approach, focusing on the tails of the cumulative distribution Function (CDF). We compare different verify-based algorithms to force an initial tail-to-tail (1st percentile of CDF) resistive window, demonstrating that, in order to reduce the total programming time, a complete Write/Erase cycle must be performed at each verify attempt. We also prove that the stability of the programmed LRS/HRS states is strongly influenced by the external temperature and that it is affected by the programming pulse width (PW) used in the algorithm, likely driving the diffusion processes that originate the state degradation. Selecting the appropriate PW, no overlap of the LRS and HRS distributions is observed after 1 week at room temperature.

  6. MENTOR-BASED EFFORT TO ADVANCE IMPLEMENTATION OF PREFERRED MANAGEMENT PRACTICES (PMPS) FOR OIL PRODUCERS IN SOUTH MIDCONTINENT (OKLAHOMA/ARKANSAS) AND WEST COAST (CALIFORNIA) REGIONS

    Energy Technology Data Exchange (ETDEWEB)

    Donald F. Duttlinger; E. Lance Cole

    2004-12-01

    The Petroleum Technology Transfer Council (PTTC) and cooperating Regional Lead Organizations (RLOs) in its South Midcontinent (Oklahoma Geological Survey, Norman, Oklahoma) and West Coast (University of Southern California, Los Angeles, California) regions conducted a ''Mentor-Based Effort to Advance Implementation of Preferred Management Practices (PMPs) For Oil Producers'' (DE-FC26-01BC15272) under an award in Phase I of Department of Energy's (DOE's) PUMP (Preferred Upstream Management Practices) program. The project's objective was to enable producers in California, Oklahoma and Arkansas to increase oil production, moderating or potentially reversing production declines and extending the life of marginal wells in the near term. PTTC identified the primary constraints inhibiting oil production through surveys and PUMPer direct contacts in both regions. The leading common constraint was excess produced water and associated factors. Approaches for addressing this common constraint were tailored for each region. For Oklahoma and Arkansas, the South Midcontinent Region developed a concise manual titled ''Produced Water And Associated Issues'' that led to multiple workshops across the region, plus workshops in several other regions. In California, the West Coast Region leveraged PUMP funding to receive an award from the California Energy Commission for $300,000 to systematically evaluate water control solutions for the California geological environment. Products include still-developing remedial action templates to help producers identify underlying causes of excess water production and screen appropriate solutions. Limited field demonstrations are being implemented to build producer confidence in water control technologies. Minor leverage was also gained by providing technology transfer support to a Global Energy Partners project that demonstrated affordable approaches for reducing power consumption. PTTC

  7. National Toxicology Program

    Science.gov (United States)

    ... to Main Navigation Skip to Site Sidebar National Toxicology Program http://ntp.niehs.nih.gov Home Testing ... NTP Cell Phone Radiofrequency Radiation Studies The National Toxicology Program (NTP) has been conducting experiments in rats ...

  8. Proton conducting cerate ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Coffey, G.W.; Pederson, L.R.; Armstrong, T.R.; Bates, J.L.; Weber, W.J. [Pacific Northwest Lab., Richland, WA (United States)

    1995-08-01

    Cerate perovskites of the general formula AM{sub x}Ce{sub 1-x}O{sub 3-{delta}}, where A = Sr or Ba and where M = Gd, Nd, Y, Yb or other rare earth dopant, are known to conduct a protonic current. Such materials may be useful as the electrolyte in a solid oxide fuel cell operating at intermediate temperatures, as an electrochemical hydrogen separation membrane, or as a hydrogen sensor. Conduction mechanisms in these materials were evaluated using dc cyclic voltammetry and mass spectrometry, allowing currents and activation energies for proton, electron, and oxygen ion contributions to the total current to be determined. For SrYb{sub 0.05}Ce{sub 0.95}O{sub 3-{delta}}, one of the best and most environmentally stable compositions, proton conduction followed two different mechanisms: a low temperature process, characterized by an activation energy of 0.42{+-}0.04 eV, and a high temperature process, characterized by an activation energy of 1.38{+-}0.13 eV. It is believed that the low temperature process is dominated by grain boundary conduction while bulk conduction is responsible for the high temperature process. The activation energy for oxygen ion conduction (0.97{+-}0.10 eV) agrees well with other oxygen conductors, while that for electronic conduction, 0.90{+-}0.09 eV, is affected by a temperature-dependent electron carrier concentration. Evaluated by direct measurement of mass flux through a dense ceramic with an applied dc field, oxygen ions were determined to be the majority charge carrier except at the lowest temperatures, followed by electrons and then protons.

  9. Heat conduction. 3. ed.

    Energy Technology Data Exchange (ETDEWEB)

    Jiji, Latif M. [City Coll. of City Univ. of New York, NY (United States). Dept. of Mechanical Engineering

    2009-07-01

    This textbook presents the classical topics of conduction heat transfer and extends the coverage to include chapters on perturbation methods, heat transfer in living tissue, and microscale conduction. This makes the book unique among the many published textbook on conduction heat transfer. Other noteworthy features of the book are: The material is organized to provide students with the tools to model, analyze and solve a wide range of engineering applications involving conduction heat transfer. Mathematical techniques are presented in a clear and simplified fashion to be used as instruments in obtaining solutions. The simplicity of one-dimensional conduction is used to drill students in the role of boundary conditions and to explore a variety of physical conditions that are of practical interest. Examples are carefully selected to illustrate the application of principles and the construction of solutions. Students are trained to follow a systematic problem solving methodology with emphasis on thought process, logic, reasoning and verification. Solutions to all examples and end-of-chapter problems follow an orderly problems solving approach. (orig.)

  10. Conducting everyday life

    DEFF Research Database (Denmark)

    Juhl, Pernille

    In the paper I discuss how small children (0-4 year) develop through ‘conducting everyday life’ across contexts (Holzkamp 2013). I discuss how this process of conducting everyday life is essential when discussing the ‘good life for children’ from a child perspective. These issues are addressed...... by using materials from my ongoing Ph.D. project which is based on cultural-historical research traditions and critical psychological conceptualizations. The project is a qualitative study of 6 children, who for various reasons are defined as being children-at-risk. Due to concerns about their development......, they are involved in preventive interventions. I conducted participatory observations with the children in their everyday life. Overall, the study stresses that even small children must be perceived as active participants who act upon and struggle with different conditions and meaning making processes across...

  11. Conducting everyday life

    DEFF Research Database (Denmark)

    Juhl, Pernille

    In the paper I discuss how small children (0-4 year) develop through ‘conducting everyday life’ across contexts (Holzkamp 2013). I discuss how this process of conducting everyday life is essential when discussing the ‘good life for children’ from a child perspective. These issues are addressed......, they are involved in preventive interventions. I conducted participatory observations with the children in their everyday life. Overall, the study stresses that even small children must be perceived as active participants who act upon and struggle with different conditions and meaning making processes across...... by using materials from my ongoing Ph.D. project which is based on cultural-historical research traditions and critical psychological conceptualizations. The project is a qualitative study of 6 children, who for various reasons are defined as being children-at-risk. Due to concerns about their development...

  12. Low thermal conductivity oxides

    Energy Technology Data Exchange (ETDEWEB)

    Pan, Wei; Phillpot, Simon R.; Wan, Chunlei; Chernatynskiy, Aleksandr; Qu, Zhixue

    2012-10-09

    Oxides hold great promise as new and improved materials for thermal-barrier coating applications. The rich variety of structures and compositions of the materials in this class, and the ease with which they can be doped, allow the exploration of various mechanisms for lowering thermal conductivity. In this article, we review recent progress in identifying specific oxides with low thermal conductivity from both theoretical and experimental perspectives. We explore the mechanisms of lowering thermal conductivity, such as introducing structural/chemical disorder, increasing material density, increasing the number of atoms in the primitive cell, and exploiting the structural anisotropy. We conclude that further systematic exploration of oxide crystal structures and chemistries are likely to result in even further improved thermal-barrier coatings.

  13. Responsible conduct of research

    CERN Document Server

    Shamoo, Adil E

    2015-01-01

    Since the early 2000s, the field of Responsible Conduct of Research has become widely recognized as essential to scientific education, investigation, and training. At present, research institutions with public funding are expected to have some minimal training and education in RCR for their graduate students, fellows and trainees. These institutions also are expected to have a system in place for investigating and reporting misconduct in research or violations of regulations in research with human subjects, or in their applications to federal agencies for funding. Public scrutiny of the conduct of scientific researchers remains high. Media reports of misconduct scandals, biased research, violations of human research ethics rules, and moral controversies in research occur on a weekly basis. Since the 2009 publication of the 2nd edition of Shamoo and Resnik's Responsible Conduct of Research, there has been a vast expansion in the information, knowledge, methods, and diagnosis of problems related to RCR and the ...

  14. Electrical Conductivity in Textiles

    Science.gov (United States)

    2006-01-01

    Copper is the most widely used electrical conductor. Like most metals, though, it has several drawbacks: it is heavy, expensive, and can break. Fibers that conduct electricity could be the solutions to these problems, and they are of great interest to NASA. Conductive fibers provide lightweight alternatives to heavy copper wiring in a variety of settings, including aerospace, where weight is always a chief concern. This is an area where NASA is always seeking improved materials. The fibers are also more cost-effective than metals. Expenditure is another area where NASA is always looking to make improvements. In the case of electronics that are confined to small spaces and subject to severe stress, copper is prone to breaking and losing connection over time. Flexible conductive fibers eliminate that problem. They are more supple and stronger than brittle copper and, thus, find good use in these and similar situations. While clearly a much-needed material, electrically conductive fibers are not readily available. The cost of new technology development, with all the pitfalls of troubleshooting production and the years of testing, and without the guarantee of an immediate market, is often too much of a financial hazard for companies to risk. NASA, however, saw the need for electrical fibers in its many projects and sought out a high-tech textile company that was already experimenting in this field, Syscom Technology, Inc., of Columbus, Ohio. Syscom was founded in 1993 to provide computer software engineering services and basic materials research in the areas of high-performance polymer fibers and films. In 1999, Syscom decided to focus its business and technical efforts on development of high-strength, high-performance, and electrically conductive polymer fibers. The company developed AmberStrand, an electrically conductive, low-weight, strong-yet-flexible hybrid metal-polymer YARN.

  15. Documenting Employee Conduct

    Science.gov (United States)

    Dalton, Jason

    2009-01-01

    One of the best ways for a child care program to lose an employment-related lawsuit is failure to document the performance of its employees. Documentation of an employee's performance can provide evidence of an employment-related decision such as discipline, promotion, or discharge. When properly implemented, documentation of employee performance…

  16. Chiral conducting polymers.

    Science.gov (United States)

    Kane-Maguire, Leon A P; Wallace, Gordon G

    2010-07-01

    This critical review describes the preparation and properties of a relatively new class of chiral macromolecules, namely chiral conducting polymers. It focuses in particular on examples based on polypyrrole, polythiophene and polyaniline. They possess remarkable properties, combining not only chirality with electrical conductivity but also the ability to undergo facile redox and pH switching. These unique properties have opened up a range of exciting new potential applications, including as chiral sensors, as novel stationary phases for chiral separations, and as chiral electrodes for electrochemical asymmetric synthesis (153 references).

  17. Natures of Conduct

    DEFF Research Database (Denmark)

    Sielemann, Rasmus Basse

    Natures of Conduct explores the rationalities, practices and techniques of government processes in the Danish West Indies in the period between the late eighteenth century to the end of Danish colonial rule in 1917. In doing so, it engages Michel Foucault’s concepts of governmentality and the ‘di......Natures of Conduct explores the rationalities, practices and techniques of government processes in the Danish West Indies in the period between the late eighteenth century to the end of Danish colonial rule in 1917. In doing so, it engages Michel Foucault’s concepts of governmentality...

  18. Conducting Social Experiments.

    Science.gov (United States)

    Boruch, Robert F.

    1987-01-01

    It is difficult to conduct randomized field experiments. In the past decade, the use of alternative randomization plans and incentives has contributed to their operational feasibility; legal, ethical, and professional arguments for experimentation have matured; and expectations have become better aligned with practical constraints that are likely…

  19. Conducting Educational Design Research

    Science.gov (United States)

    McKenney, Susan; Reeves, Thomas

    2012-01-01

    Educational design research blends scientific investigation with systematic development and implementation of solutions to educational problems. Empirical investigation is conducted in real learning settings--not laboratories--to craft usable and effective solutions. At the same time, the research is carefully structured to produce theoretical…

  20. New code of conduct

    CERN Multimedia

    Laëtitia Pedroso

    2010-01-01

    During his talk to the staff at the beginning of the year, the Director-General mentioned that a new code of conduct was being drawn up. What exactly is it and what is its purpose? Anne-Sylvie Catherin, Head of the Human Resources (HR) Department, talked to us about the whys and wherefores of the project.   Drawing by Georges Boixader from the cartoon strip “The World of Particles” by Brian Southworth. A code of conduct is a general framework laying down the behaviour expected of all members of an organisation's personnel. “CERN is one of the very few international organisations that don’t yet have one", explains Anne-Sylvie Catherin. “We have been thinking about introducing a code of conduct for a long time but lacked the necessary resources until now”. The call for a code of conduct has come from different sources within the Laboratory. “The Equal Opportunities Advisory Panel (read also the "Equal opportuni...

  1. High Thermal Conductivity Materials

    CERN Document Server

    Shinde, Subhash L

    2006-01-01

    Thermal management has become a ‘hot’ field in recent years due to a need to obtain high performance levels in many devices used in such diverse areas as space science, mainframe and desktop computers, optoelectronics and even Formula One racing cars! Thermal solutions require not just taking care of very high thermal flux, but also ‘hot spots’, where the flux densities can exceed 200 W/cm2. High thermal conductivity materials play an important role in addressing thermal management issues. This volume provides readers a basic understanding of the thermal conduction mechanisms in these materials and discusses how the thermal conductivity may be related to their crystal structures as well as microstructures developed as a result of their processing history. The techniques for accurate measurement of these properties on large as well as small scales have been reviewed. Detailed information on the thermal conductivity of diverse materials including aluminum nitride (AlN), silicon carbide (SiC), diamond, a...

  2. Transient Heat Conduction

    DEFF Research Database (Denmark)

    Rode, Carsten

    1998-01-01

    Analytical theory of transient heat conduction.Fourier's law. General heat conducation equation. Thermal diffusivity. Biot and Fourier numbers. Lumped analysis and time constant. Semi-infinite body: fixed surface temperature, convective heat transfer at the surface, or constant surface heat flux...

  3. Conducting Educational Design Research

    Science.gov (United States)

    McKenney, Susan; Reeves, Thomas

    2012-01-01

    Educational design research blends scientific investigation with systematic development and implementation of solutions to educational problems. Empirical investigation is conducted in real learning settings--not laboratories--to craft usable and effective solutions. At the same time, the research is carefully structured to produce theoretical…

  4. Conducting metal dithiolate complexes

    DEFF Research Database (Denmark)

    Underhill, A. E.; Ahmad, M. M.; Turner, D. J.;

    1985-01-01

    Further work on the chemical composition of the one-dimensional metallic metal dithiolene complex Li-Pt(mnt) is reported. The electrical conduction and thermopower properties of the nickel and palladium complexes are reported and compared with those of the platinum compound...

  5. Conductance eigenchannels in nanocontacts

    DEFF Research Database (Denmark)

    Brandbyge, Mads; Sørensen, Mads Reinholdt; Jacobsen, Karsten Wedel

    1997-01-01

    The electronic conductance of metal nanocontacts is analyzed in terms of eigenchannels for the transmission. The transmission through individual eigenchannels is calculated numerically for realistic models of gold point contacts based on molecular-dynamics simulation of the elongation of a contac...

  6. Conductive Education Perspectives.

    Science.gov (United States)

    Spivack, Frieda

    1995-01-01

    This article describes conductive education for children with neuromotor disabilities and identifies its major concepts, including orthofunction, rhythmic intention, and verbal regulation. Also addressed are the role of the conductor and the group and the training of conductors at the Peto Institute in Hungary. Research on the method's…

  7. High-Thermal-Conductivity Fabrics

    Science.gov (United States)

    Chibante, L. P. Felipe

    2012-01-01

    Heat management with common textiles such as nylon and spandex is hindered by the poor thermal conductivity from the skin surface to cooling surfaces. This innovation showed marked improvement in thermal conductivity of the individual fibers and tubing, as well as components assembled from them. The problem is centered on improving the heat removal of the liquid-cooled ventilation garments (LCVGs) used by astronauts. The current design uses an extensive network of water-cooling tubes that introduces bulkiness and discomfort, and increases fatigue. Range of motion and ease of movement are affected as well. The current technology is the same as developed during the Apollo program of the 1960s. Tubing material is hand-threaded through a spandex/nylon mesh layer, in a series of loops throughout the torso and limbs such that there is close, form-fitting contact with the user. Usually, there is a nylon liner layer to improve comfort. Circulating water is chilled by an external heat exchanger (sublimator). The purpose of this innovation is to produce new LCVG components with improved thermal conductivity. This was addressed using nanocomposite engineering incorporating high-thermalconductivity nanoscale fillers in the fabric and tubing components. Specifically, carbon nanotubes were added using normal processing methods such as thermoplastic melt mixing (compounding twin screw extruder) and downstream processing (fiber spinning, tubing extrusion). Fibers were produced as yarns and woven into fabric cloths. The application of isotropic nanofillers can be modeled using a modified Nielsen Model for conductive fillers in a matrix based on Einstein s viscosity model. This is a drop-in technology with no additional equipment needed. The loading is limited by the ability to maintain adequate dispersion. Undispersed materials will plug filtering screens in processing equipment. Generally, the viscosity increases were acceptable, and allowed the filled polymers to still be

  8. Nanostructured conductive polymeric materials

    Science.gov (United States)

    Al-Saleh, Mohammed H.

    Conductive polymer composites (CPCs) are a suitable alternative to metals in many applications due to their light-weight, corrosion resistance, low cost, ease of processing and design flexibility. CPCs have been formulated using different types of conductive fillers. In this PhD thesis, the focus is on CPCs for electrostatic discharge (ESD) protection and electromagnetic interference (EMI) attenuation. Despite the versatility of conductive fillers, carbon black (CB) has been the dominant filler to make CPCs for ESD protection applications because CB/polymer composites have a cost advantage over all other CPCs. For EMI shielding, stainless steel fibres and metal coated fibers are the preferred fillers, however CPCs made of those fibers are not the dominant EMI shielding materials. Metal coated and polymer plated polymers are the most widely used EMI shielding options. The limited use of CPCs in the EMI shielding market is because the high filler loading required to formulate a composite with an adequate level of shielding remarkably increases the composite price. In order to increase the competitiveness of CPCs, percolation threshold should be minimized as much as possible and composites with high EMI shielding capabilities at low filler loading should be formulated because all conductive fillers are expensive compared to polymers. In this thesis, two different methodologies to reduce percolation threshold in CPCs have been successfully developed and a CPC with exceptional EMI shielding capability has been formulated using copper nanowires as conductive filler. The first percolation threshold reduction technique is based on the selective localization of CB at the interface of immiscible polymer blend. The technique requires adding a copolymer that prefers the blend's interface and for which CB nanoparticles has the highest affinity. The second method is based on producing a CPC powder and then using this powder as a conductive filler to produce composite by dry

  9. Impact of a Home-Based Physical and Nutritional Intervention Program Conducted by Lay-Volunteers on Handgrip Strength in Prefrail and Frail Older Adults: A Randomized Control Trial

    Science.gov (United States)

    Haider, Sandra; Dorner, Thomas E.; Luger, Eva; Kapan, Ali; Titze, Sylvia; Lackinger, Christian; Schindler, Karin E.

    2017-01-01

    A randomized controlled trial was performed to compare the effects of a home-based physical and nutritional intervention program carried out by lay-volunteers to home visits with social support alone. Buddies visited 80 prefrail or frail older persons at home twice a week for 12 weeks. The physical training and nutrition group (PTN, n = 39) performed two sets of six strength exercises, discussed nutritional topics and received social support. The social support group (SoSu, n = 41) received home visits with social support only. In the PTN group, handgrip strength increased significantly by 2.4 kg (95% CI: 1.0–3.8). In the SoSu group we did not see a significant improvement. However, no significant between-group difference was found. Physical performance increased in both groups, although with a higher increase of 1.0 point (95% CI: 0.1–2.0) in the PTN group. In none of the groups muscle mass changed. Further results showed that frail individuals benefit more from the intervention than prefrail individuals (OR: 2.78; 95% CI: 1.01–7.66). Handgrip strength in the intervention group increased by a clinically relevant value and this effect is comparable to that obtained by health-care professionals. Therefore, home visits with a physical training and nutritional program could offer a new perspective in the care of community-dwelling prefrail and frail older persons. PMID:28085913

  10. Impact of a Home-Based Physical and Nutritional Intervention Program Conducted by Lay-Volunteers on Handgrip Strength in Prefrail and Frail Older Adults: A Randomized Control Trial.

    Science.gov (United States)

    Haider, Sandra; Dorner, Thomas E; Luger, Eva; Kapan, Ali; Titze, Sylvia; Lackinger, Christian; Schindler, Karin E

    2017-01-01

    A randomized controlled trial was performed to compare the effects of a home-based physical and nutritional intervention program carried out by lay-volunteers to home visits with social support alone. Buddies visited 80 prefrail or frail older persons at home twice a week for 12 weeks. The physical training and nutrition group (PTN, n = 39) performed two sets of six strength exercises, discussed nutritional topics and received social support. The social support group (SoSu, n = 41) received home visits with social support only. In the PTN group, handgrip strength increased significantly by 2.4 kg (95% CI: 1.0-3.8). In the SoSu group we did not see a significant improvement. However, no significant between-group difference was found. Physical performance increased in both groups, although with a higher increase of 1.0 point (95% CI: 0.1-2.0) in the PTN group. In none of the groups muscle mass changed. Further results showed that frail individuals benefit more from the intervention than prefrail individuals (OR: 2.78; 95% CI: 1.01-7.66). Handgrip strength in the intervention group increased by a clinically relevant value and this effect is comparable to that obtained by health-care professionals. Therefore, home visits with a physical training and nutritional program could offer a new perspective in the care of community-dwelling prefrail and frail older persons.

  11. 'Stuffed' conducting polymers

    DEFF Research Database (Denmark)

    Winther-Jensen, Bjørn; Chen, Jun; West, Keld

    2005-01-01

    Conducting polymers (CP) obtained by oxidative polymerization using iron(III) salts shrink when Fe(II) and the excess counter ions are washed out after polymerization. This phenomenon can be used to incorporate active molecules into the CP matrix via their addition to the wash liquid. In the pres......Conducting polymers (CP) obtained by oxidative polymerization using iron(III) salts shrink when Fe(II) and the excess counter ions are washed out after polymerization. This phenomenon can be used to incorporate active molecules into the CP matrix via their addition to the wash liquid....... In the present work we demonstrate this principle on three different CP's: polypyrrole (PPy), poly-terthiophene (PTTh) and poly(3,4-ethylenedioxy thiophene) (PEDT), using ferrocene as a model molecule to be trapped in the polymer films. (c) 2005 Elsevier Ltd. All rights reserved....

  12. Conducting Polymer Based Nanobiosensors

    Directory of Open Access Journals (Sweden)

    Chul Soon Park

    2016-06-01

    Full Text Available In recent years, conducting polymer (CP nanomaterials have been used in a variety of fields, such as in energy, environmental, and biomedical applications, owing to their outstanding chemical and physical properties compared to conventional metal materials. In particular, nanobiosensors based on CP nanomaterials exhibit excellent performance sensing target molecules. The performance of CP nanobiosensors varies based on their size, shape, conductivity, and morphology, among other characteristics. Therefore, in this review, we provide an overview of the techniques commonly used to fabricate novel CP nanomaterials and their biosensor applications, including aptasensors, field-effect transistor (FET biosensors, human sense mimicking biosensors, and immunoassays. We also discuss prospects for state-of-the-art nanobiosensors using CP nanomaterials by focusing on strategies to overcome the current limitations.

  13. Highly Thermal Conductive Nanocomposites

    Science.gov (United States)

    Sun, Ya-Ping (Inventor); Connell, John W. (Inventor); Veca, Lucia Monica (Inventor)

    2015-01-01

    Disclosed are methods for forming carbon-based fillers as may be utilized in forming highly thermal conductive nanocomposite materials. Formation methods include treatment of an expanded graphite with an alcohol/water mixture followed by further exfoliation of the graphite to form extremely thin carbon nanosheets that are on the order of between about 2 and about 10 nanometers in thickness. Disclosed carbon nanosheets can be functionalized and/or can be incorporated in nanocomposites with extremely high thermal conductivities. Disclosed methods and materials can prove highly valuable in many technological applications including, for instance, in formation of heat management materials for protective clothing and as may be useful in space exploration or in others that require efficient yet light-weight and flexible thermal management solutions.

  14. Phoenix Conductivity Probe

    Science.gov (United States)

    2008-01-01

    This image taken by the Surface Stereo Imager on Sol 49, or the 49th Martian day of the mission (July 14, 2008), shows thermal and electrical conductivity probe on NASA's Phoenix Mars Lander's Robotic Arm. The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is led by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  15. Conducting Thermoset Polymers.

    Science.gov (United States)

    2007-11-02

    polymers conducting. The acetylene-terminated Schiff base and acetylene-terminated polythiophene monomers were first cured, then doped with iodine... Schiff base thermoset was implanted with high energy argon ions using a commercial ion implanter. Electron spin resonance, photoluminescence, and...photoabsorption data suggest that polarons can form in the doped and undoped forms of the acetylene-terminated Schiff base and polythiophene thermoset

  16. Thermally conductive polymers

    Science.gov (United States)

    Byrd, N. R.; Jenkins, R. K.; Lister, J. L. (Inventor)

    1971-01-01

    A thermally conductive polymer is provided having physical and chemical properties suited to use as a medium for potting electrical components. The polymer is prepared from hydroquinone, phenol, and formaldehyde, by conventional procedures employed for the preparation of phenol-formaldehyde resins. While the proportions of the monomers can be varied, a preferred polymer is formed from the monomers in a 1:1:2.4 molar or ratio of hydroquinone:phenol:formaldehyde.

  17. STUDIES ON ENHANCED CONDUCTIVITY OF STRETCHED CONDUCTING POLYMERS

    Institute of Scientific and Technical Information of China (English)

    WAN Meixiang

    1995-01-01

    A physical model of series of the conductivity on chain and the interchain conductivity between chains is proposed to explain enhanced conductivity of stretched conducting polymers.This model suggests that the enhanced conductivity for stretched conducting polymers might be due to increasing of the interchain conductivity between chains along the elongation direction after drawing processes if the conductivity on chain is assumed much larger than that of the interchain conductivity between chains. According to this model, it is expected that the temperature dependence of conductivity measured by four-probe method for stretched conducting polymers is controlled by a variation of the interchain conductivity between chains with temperature, which can be used to explain that a metallic temperature dependence of conductivity for stretched conducting polymers is not observed although the conductivity along the elongation direction is enhanced by two or three orders of magnitude.

  18. Conductive dense hydrogen.

    Science.gov (United States)

    Eremets, M I; Troyan, I A

    2011-11-13

    Molecular hydrogen is expected to exhibit metallic properties under megabar pressures. This metal is predicted to be superconducting with a very high critical temperature, T(c), of 200-400 K, and it may acquire a new quantum state as a metallic superfluid and a superconducting superfluid. It may potentially be recovered metastably at ambient pressures. However, experiments carried out at low temperatures, Thydrogen remains in the molecular insulating state. Here we report on the transformation of normal molecular hydrogen at room temperature (295 K) to a conductive and metallic state. At 200 GPa the Raman frequency of the molecular vibron strongly decreased and the spectral width increased, evidencing a strong interaction between molecules. Deuterium behaved similarly. Above 220 GPa, hydrogen became opaque and electrically conductive. At 260-270 GPa, hydrogen transformed into a metal as the conductance of hydrogen sharply increased and changed little on further pressurizing up to 300 GPa or cooling to at least 30 K; and the sample reflected light well. The metallic phase transformed back at 295 K into molecular hydrogen at 200 GPa. This significant hysteresis indicates that the transformation of molecular hydrogen into a metal is accompanied by a first-order structural transition presumably into a monatomic liquid state. Our findings open an avenue for detailed and comprehensive studies of metallic hydrogen.

  19. Conduction heat transfer solutions

    Energy Technology Data Exchange (ETDEWEB)

    VanSant, J.H.

    1983-08-01

    This text is a collection of solutions to a variety of heat conduction problems found in numerous publications, such as textbooks, handbooks, journals, reports, etc. Its purpose is to assemble these solutions into one source that can facilitate the search for a particular problem solution. Generally, it is intended to be a handbook on the subject of heat conduction. There are twelve sections of solutions which correspond with the class of problems found in each. Geometry, state, boundary conditions, and other categories are used to classify the problems. Each problem is concisely described by geometry and condition statements, and many times a descriptive sketch is also included. The introduction presents a synopsis on the theory, differential equations, and boundary conditions for conduction heat transfer. Some discussion is given on the use and interpretation of solutions. Supplementary data such as mathematical functions, convection correlations, and thermal properties are included for aiding the user in computing numerical values from the solutions. 155 figs., 92 refs., 9 tabs.

  20. Robust mixed conducting membrane structure

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention provides a membrane structure, comprising in said order a first electronically conducting layer, an ionically conducting layer, and a second electronically conducting layer, characterized in that the first and second electronically conducting layers are internally short circ...

  1. The Design and Conduct of C Language Program Flowchart Drawing System%C语言程序流程图绘制系统的设计与实现

    Institute of Scientific and Technical Information of China (English)

    许秀林; 韩廷祥

    2013-01-01

    In order for the C language learner to combine the abstract programs and the visual flowchart, and cultivate the good habit of drawing a flowchart at first and then writing programs, it is very important to develop and use flowchart drawing system. Most of current flowchart drawing software takes the straight line, circle, polygon, triangle, and quadrilateral geometry as the graphics primitive, with drawing mode of“primitive+ connector”. It takes the basic structure of C language system as the graphics primitive in this system, with the drawing mode of “primitive + assemble”, which can wake the flowchart more intuitive and more convenient, without chart deformation.%为使C语言学习者能把直观的流程图和抽象的程序结合起来,养成先绘制流程图再编写程序的良好习惯,开发和使用流程图绘制系统显得尤为重要。目前,流程图绘制软件多以直线、圆、三角形、四边形、多边形等几何图形作为基本图元,采用“图元+连接线”的绘制模式。为提高绘制流程图的效率,以程序基本结构为基本图元,使用“图元+装配”的绘制模式,设计了C语言程序流程图绘制软件,以使用户绘制流程图更直观、方便,且在图元编辑时不会引起流程图的变形,易学易用。

  2. Thermal contact conductance

    CERN Document Server

    Madhusudana, Chakravarti V

    2013-01-01

    The work covers both theoretical and practical aspects of thermal contact conductance. The theoretical discussion focuses on heat transfer through spots, joints, and surfaces, as well as the role of interstitial materials (both planned and inadvertent). The practical discussion includes formulae and data that can be used in designing heat-transfer equipment for a variety of joints, including special geometries and configurations. All of the material has been updated to reflect the latest advances in the field.

  3. Electrically Conductive Porous Membrane

    Science.gov (United States)

    Burke, Kenneth Alan (Inventor)

    2014-01-01

    The present invention relates to an electrically conductive membrane that can be configured to be used in fuel cell systems to act as a hydrophilic water separator internal to the fuel cell, or as a water separator used with water vapor fed electrolysis cells, or as a water separator used with water vapor fed electrolysis cells, or as a capillary structure in a thin head pipe evaporator, or as a hydrophobic gas diffusion layer covering the fuel cell electrode surface in a fuel cell.

  4. Conductive dense hydrogen

    Science.gov (United States)

    Eremets, M.; Troyan, I.

    2012-12-01

    Hydrogen at ambient pressures and low temperatures forms a molecular crystal which is expected to display metallic properties under megabar pressures. This metal is predicted to be superconducting with a very high critical temperature Tc of 200-400 K. The superconductor may potentially be recovered metastably at ambient pressures, and it may acquire a new quantum state as a metallic superfluid and a superconducting superfluid. Recent experiments performed at low temperatures T 220 GPa, new Raman modes arose, providing evidence for the transformation to a new opaque and electrically conductive phase IV. Above 260 GPa, in the next phase V, hydrogen reflected light well. Its resistance was nearly temperature-independent over a wide temperature range, down to 30 K, indicating that the hydrogen was metallic. Releasing the pressure induced the metallic phase to transform directly into molecular hydrogen with significant hysteresis at 200 GPa and 295 K. These data were published in our paper: M. I. Eremets and I. A. Troyan "Conductive dense hydrogen." Nature Materials 10: 927-931. We will present also new results on hydrogen: phase diagram with phases IV and V determined in P,T domain up to 300 GPa and 350 K. We will also discuss possible structures of phase IV based on our Raman and infrared measurements up to 300 GPa.

  5. Radiative thermal conduction fronts

    Science.gov (United States)

    Borkowski, Kazimierz J.; Balbus, Steven A.; Fristrom, Carl C.

    1990-01-01

    The discovery of the O VI interstellar absorption lines in our Galaxy by the Copernicus observatory was a turning point in our understanding of the Interstellar Medium (ISM). It implied the presence of widespread hot (approx. 10 to the 6th power K) gas in disk galaxies. The detection of highly ionized species in quasi-stellar objects' absorption spectra may be the first indirect observation of this hot phase in external disk galaxies. Previous efforts to understand extensive O VI absorption line data from our Galaxy were not very successful in locating the regions where this absorption originates. The location at interfaces between evaporating ISM clouds and hot gas was favored, but recent studies of steady-state conduction fronts in spherical clouds by Ballet, Arnaud, and Rothenflug (1986) and Bohringer and Hartquist (1987) rejected evaporative fronts as the absorption sites. Researchers report here on time-dependent nonequilibrium calculations of planar conductive fronts whose properties match well with observations, and suggest reasons for the difference between the researchers' results and the above. They included magnetic fields in additional models, not reported here, and the conclusions are not affected by their presence.

  6. Robust mixed conducting membrane structure

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention provides a membrane structure, comprising in said order a first electronically conducting layer, an ionically conducting layer, and a second electronically conducting layer, characterized in that the first and second electronically conducting layers are internally short...... circuited. The present invention further provides a method of producing the above membrane structure, comprising the steps of : providing a ionically conducting layer; applying at least one layer of electronically conducting material on each side of said ionically conducting layer; sintering the multilayer...

  7. Ion-conducting membranes

    Energy Technology Data Exchange (ETDEWEB)

    Masel, Richard L.; Chen, Qingmei; Liu, Zengcai; Kutz, Robert

    2016-06-21

    An ion conducting polymeric composition mixture comprises a copolymer of styrene and vinylbenzyl-R.sub.s. R.sub.s is selected from the group consisting of imidazoliums and pyridiniums. The composition contains 10%-90% by weight of vinylbenzyl-R.sub.s. The composition can further comprise a polyolefin comprising substituted polyolefins, a polymer comprising cyclic amine groups, a polymer comprising at least one of a phenylene group and a phenyl group, a polyamide, and/or the reaction product of a constituent having two carbon-carbon double bonds. The composition can be in the form of a membrane. In a preferred embodiment, the membrane is a Helper Membrane that increases the faradaic efficiency of an electrochemical cell into which the membrane is incorporated, and also allows product formation at lower voltages than in cells without the Helper Membrane.

  8. Ion-conducting membranes

    Energy Technology Data Exchange (ETDEWEB)

    Masel, Richard I.; Chen, Qingmei; Liu, Zengcai; Kutz, Robert

    2017-02-28

    An ion conducting polymeric composition mixture comprises a copolymer of styrene and vinylbenzyl-R.sub.s. R.sub.s is selected from the group consisting of imidazoliums, pyridiniums, pyrazoliums, pyrrolidiniums, pyrroliums, pyrimidiums, piperidiniums, indoliums, and triaziniums. The composition contains 10%-90% by weight of vinylbenzyl-R.sub.s. The composition can further comprise a polyolefin comprising substituted polyolefins, a polymer comprising cyclic amine groups, a polymer comprising at least one of a phenylene group and a phenyl group, a polyamide, and/or the reaction product of a constituent having two carbon-carbon double bonds. The composition can be in the form of a membrane. In a preferred embodiment, the membrane is a Helper Membrane that increases the faradaic efficiency of an electrochemical cell into which the membrane is incorporated, and also allows product formation at lower voltages than in cells without the Helper Membrane.

  9. [Female conduct disorders].

    Science.gov (United States)

    Vloet, Timo D; Großheinrich, Nicola; Konrad, Kerstin; Freitag, Christine; Herpertz-Dahlmann, Beate

    2014-03-01

    The last few years have seen much research on girls with conduct disorder (CD). This article summarizes the gender-specific data regarding prevalence, differences with respect to symptomatology (e.g., subtypes of aggression, callous-unemotional (cu)-traits), and it presents data on the autonomic and neuroendocrine stress system as well as genetic, neurocognitive, and neuroimaging data. Differences in the impact of environmental factors on boys and girls for the development of CD are discussed. Taken together, the data indicate that there is great overlap in symptomatology, personality traits, and neurobiological aberrations in girls and boys with CD. Since fewer girls than boys exhibit CD symptomatology, further investigations on CD in girls might help to identify resilience factors that could improve future therapeutic interventions.

  10. Lateral conduction infrared photodetector

    Science.gov (United States)

    Kim, Jin K.; Carroll, Malcolm S.

    2011-09-20

    A photodetector for detecting infrared light in a wavelength range of 3-25 .mu.m is disclosed. The photodetector has a mesa structure formed from semiconductor layers which include a type-II superlattice formed of alternating layers of InAs and In.sub.xGa.sub.1-xSb with 0.ltoreq.x.ltoreq.0.5. Impurity doped regions are formed on sidewalls of the mesa structure to provide for a lateral conduction of photo-generated carriers which can provide an increased carrier mobility and a reduced surface recombination. An optional bias electrode can be used in the photodetector to control and vary a cut-off wavelength or a depletion width therein. The photodetector can be formed as a single-color or multi-color device, and can also be used to form a focal plane array which is compatible with conventional read-out integrated circuits.

  11. Employment and Training Programs.

    Science.gov (United States)

    Minnesota State Office of the Legislative Auditor, St. Paul. Program Evaluation Div.

    This report examines the effectiveness of employment and training programs in Minnesota and discusses the impact of the 1985 Jobs Bill state legislation. Chapter 1 provides an introduction to Minnesota's programs and to studies of employment and training programs conducted nationwide. Chapter 2 studies the use of Job Training Partnership Act funds…

  12. Targeted Technology Transfer to US Independents

    Energy Technology Data Exchange (ETDEWEB)

    E. Lance Cole

    2009-09-30

    The Petroleum Technology Transfer Council (PTTC) was established by domestic crude oil and natural gas producers, working in conjunction with the Independent Petroleum Association of America (IPAA), the U.S. Department of Energy (DOE) and selected universities, in 1994 as a national not-for-profit organization. Its goal is to transfer Exploration and Production (E&P) technology to the domestic upstream petroleum industry, in particular to the small independent operators. PTTC connects producers, technology providers and innovators, academia, and university/industry/government research and development (R&D) groups. From inception PTTC has received federal funding through DOE's oil and natural gas program managed by the National Energy Technology Laboratory (NETL). With higher funding available in its early years, PTTC was able to deliver well more than 100 workshops per year, drawing 6,000 or more attendees per year. Facing the reality of little or no federal funding in the 2006-2007 time frame, PTTC and the American Association of Petroleum Geologists (AAPG) worked together for PTTC to become a subsidiary organization of AAPG. This change brings additional organizational and financial resources to bear for PTTC's benefit. PTTC has now been 'powered by AAPG' for two full fiscal years. There is a clear sense that PTTC has stabilized and is strengthening its regional workshop and national technology transfer programs and is becoming more entrepreneurial in exploring technology transfer opportunities beyond its primary DOE contract. Quantitative accomplishments: PTTC has maintained its unique structure of a national organization working through Regional Lead Organizations (RLOs) to deliver local, affordable workshops. During the contract period PTTC consolidated from 10 to six regions efficiency and alignment with AAPG sections. The number of workshops delivered by its RLOs during the contract period is shown below. Combined attendance over the

  13. CONDUCTIVITY OF DONKEY MILK

    Directory of Open Access Journals (Sweden)

    F. Conte

    2009-06-01

    Full Text Available The electrical conductivity (EC of milk is considered as one of the most important parameters which supports the diagnosis of mastitis in cows.Milk ions have a considerable influence on EC and their concentrations vary depending on animal species, season, lactation stage, etc. Some components of milk can change the EC, e.g. lactose. A negative correlation between EC values and the concentration of lactose is noticed, as a consequence of the inverse relation between this disaccharide and the chlorine content in milk. Fat and casein contents exert some influence on the EC, too. This study provides preliminary results on the physiological EC values in donkey milk and aims to highlight any correlation with some of its chemical-physical parameters and Somatic Cell Count (SCC. Mean EC value in donkey milk was found to be 3.57 mS. Statistically significant correlations were found between EC and SCC (r = 0.57 , p < 0.01 and between EC and (r = 0.30 , p < 0.05. The EC and lactose were not correlated although a reduction of EC was often observed when the lactose content increased, as reported in the literature for bovine milk. According to the EC can be considered as a reliable parameter to identify any breast disorder, taking into account the physiological factors that influence EC.

  14. Thermal Contact Conductance

    Science.gov (United States)

    Salerno, Louis J.; Kittel, Peter

    1997-01-01

    The performance of cryogenic instruments is often a function of their operating temperature. Thus, designers of cryogenic instruments often are required to predict the operating temperature of each instrument they design. This requires accurate thermal models of cryogenic components which include the properties of the materials and assembly techniques used. When components are bolted or otherwise pressed together, a knowledge of the thermal performance of such joints are also needed. In some cases, the temperature drop across these joints represents a significant fraction of the total temperature difference between the instrument and its cooler. While extensive databases exist on the thermal properties of bulk materials, similar databases for pressed contacts do not. This has often lead to instrument designs that avoid pressed contacts or to the over-design of such joints at unnecessary expense. Although many people have made measurements of contact conductances at cryogenic temperatures, this data is often very narrow in scope and even more often it has not been published in an easily retrievable fashion, if published at all. This paper presents a summary of the limited pressed contact data available in the literature.

  15. Conducting Wall Hall Thrusters

    Science.gov (United States)

    Goebel, Dan M.; Hofer, Richard R.; Mikellides, Ioannis G.; Katz, Ira; Polk, James E.; Dotson, Brandon

    2013-01-01

    A unique configuration of the magnetic field near the wall of Hall thrusters, called Magnetic Shielding, has recently demonstrated the ability to significantly reduce the erosion of the boron nitride (BN) walls and extend the life of Hall thrusters by orders of magnitude. The ability of magnetic shielding to minimize interactions between the plasma and the discharge chamber walls has for the first time enabled the replacement of insulating walls with conducting materials without loss in thruster performance. The boron nitride rings in the 6 kW H6 Hall thruster were replaced with graphite that self-biased to near the anode potential. The thruster efficiency remained over 60% (within two percent of the baseline BN configuration) with a small decrease in thrust and increase in Isp typical of magnetically shielded Hall thrusters. The graphite wall temperatures decreased significantly compared to both shielded and unshielded BN configurations, leading to the potential for higher power operation. Eliminating ceramic walls makes it simpler and less expensive to fabricate a thruster to survive launch loads, and the graphite discharge chamber radiates more efficiently which increases the power capability of the thruster compared to conventional Hall thruster designs.

  16. Conducting Meta-Analysis Using SAS

    CERN Document Server

    Arthur, Winfried; Huffcutt, Allen I; Arthur, Winfred

    2001-01-01

    Conducting Meta-Analysis Using SAS reviews the meta-analysis statistical procedure and shows the reader how to conduct one using SAS. It presents and illustrates the use of the PROC MEANS procedure in SAS to perform the data computations called for by the two most commonly used meta-analytic procedures, the Hunter & Schmidt and Glassian approaches. This book serves as both an operational guide and user's manual by describing and explaining the meta-analysis procedures and then presenting the appropriate SAS program code for computing the pertinent statistics. The practical, step-by-step instru

  17. THERMAL CONDUCTIVITY OF RUBBERIZED GYPSUM BOARD

    Directory of Open Access Journals (Sweden)

    Taher Abu-Lebdeh

    2014-01-01

    Full Text Available The disposal of scrap tires is a challenging task and hence an innovative solution to meet these challenges is needed. Extensive work has been done on the utilization of waste tires in a variety of applications in asphalt pavements and concrete. However, previous investigations focus only on the mechanical properties of the rubberized materials, but few on the thermal performance. This is especially true for rubberized gypsum. Limited or no experimental data on the thermal performance of rubberized gypsum board are available. In this study, an experimental program is established to investigate the effect of amount and size of crumb rubber on the thermal properties of gypsum materials. Gypsum is replaced by four different percentage of crumb rubber: 10, 20, 30 and 40% by weight of gypsum and two sizes of crumb rubber (#30, #10_20 to make eight rubberized gypsum specimens. The prepared specimens were tested for thermal conductivity using an apparatus specially designed and constructed for this purpose. The experimental program was concluded by proposing an empirical equation to predict the thermal conductivity of rubberized gypsum board. Results indicated better thermal performance of the gypsum board due to the addition of crumb rubber. Thermal conductivity of the rubberized gypsum was 18-38% lower than the ordinary gypsum. It is concluded that thermal conductivity of rubberized gypsum decreases with the increase of crumb rubber regardless the size of the rubber and that thermal conductivity of mixtures contained 40% of rubber was about 38% lower than conventional mixture when crumb rubber #10_20 was added, while the thermal conductivity reduced by 22% when crumb rubber #30 was added. The study suggested for future work to investigate the effect of air voids size and ratio on the thermal conductivity of rubberized gypsum.

  18. Comparing proton conductivity of polymer electrolytes by percent conducting volume

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yu Seung [Los Alamos National Laboratory; Pivovar, Bryan [NREL

    2009-01-01

    Proton conductivity of sulfonated polymers plays a key role in polymer electrolyte membrane fuel cells. Mass based water uptake and ion exchange capacity of sulfonated polymers have been failed to correlating their proton conductivity. In this paper, we report a length scale parameter, percent conductivity volume, which is rather simply obtained from the chemical structure of polymer to compare proton conductivity of wholly aromatic sulfonated polymer perflurosulfonic acid. Morphology effect on proton conductivity at lower RH conditions is discussed using the percent conductivity volume parameter.

  19. Electrical Conductivity of Ferritin Proteins by Conductive AFM

    Science.gov (United States)

    Xu, Degao; Watt, Gerald D.; Harb, John N.; Davis, Robert C.

    2005-01-01

    Electrical conductivity measurements were performed on single apoferritin and holoferritin molecules by conductive atomic force microscopy. Conductivity of self-assembled monolayer films of ferritin molecules on gold surfaces was also measured. Holoferritin was 5-25 times more conductive than apoferritin, indicating that for holoferritin most electron-transfer goes through the ferrihydrite core. With 1 V applied, the average electrical currents through single holoferritin and apoferritin molecules were 2.6 PA and 0.19 PA, respectively.

  20. Variable Conductance Heat Pipes for Radioisotope Stirling Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The overall program objective is to develop a high temperature variable conductance heat pipe (VCHP) backup radiator, and integrate it into a Stirling radioisotope...

  1. Conducting polymers: Synthesis and industrial applications

    Energy Technology Data Exchange (ETDEWEB)

    Gottesfeld, S. [Los Alamos National Laboratory, NM (United States)

    1995-05-01

    The Conducting Polymer project funded by the AIM Materials Program is developing new methods for the synthesis of electronically conducting polymers and is evaluating new industrial applications for these materials which will result in significant reductions in energy usage or industrial waste. The applications specifically addressed during FY 1994 are electrochemical capacitors and membranes for gas separation. As an active material in electrochemical capacitors, conducting polymers have the potential of storing large amounts of electrical energy in low cost materials. Such devices are needed in electronics for power failure back-up and peak power, in power supplies for filtering, and in electric vehicles for peak power and load leveling. As a gas electrically adapt the membrane for specific gas combinations. Potential energy savings in the US. for this application are estimated at 1 to 3 quads/yr.

  2. The Impact of Conducting ATAM Evaluations on Army Programs

    Science.gov (United States)

    2009-05-01

    Nord, John Bergey , Stephen Blanchette, Jr., Mark Klein May 2009 ® Carnegie Mellon, Architecture Tradeoff Analysis Method, and ATAM are...Nord, R.L., Bergey , J., Blanchette, Jr., S. Klein, M. Impact of Army Architecture Evaluations (CMU/SEI-2009-SR-007). Software Engineering Institute

  3. The electrical conductivity and surface conduction of consolidated rock cores.

    Science.gov (United States)

    Alkafeef, Saad F; Alajmi, Abdullah F

    2007-05-15

    A fully computerized high-pressure and high-temperature core holder device is simultaneously used to determine the electrical conductivity, zeta potential, and surface conductivity of consolidated rock cores in aqueous and nonaqueous systems. The total electrical conductivity of rock cores was determined by coupling streaming current and potential measurements. This shows that neglecting the surface conductivity Ksigma is crucial to converting the streaming potential into zeta potentials. It is observed that plots of the core total conductivity as a function of the electrolyte conductivity KL exhibit two behaviors. At low ionic strength, the core conductivity clearly depends on the contribution of surface conductivity behind the slip plane, whereas at higher ionic strength, the magnitude of the surface conductivity becomes negligible. The electrical conductivity of rock cores was found to be in good agreement with the O'Brien theory and the Briggs method. The contribution of the stagnant layer to the surface conductivity in nonaqueous systems has been shown to be significant. This shows that the stagnant layer displays significantly different behavior in different nonaqueous systems, depending on the core porosity and the double-layer overlap. The results indicate that the application of electrokinetics in petroleum reservoirs can provide important insights into reservoir fluid flow characterization.

  4. Conductivity effect in electrorheological fluids

    Institute of Scientific and Technical Information of China (English)

    TIAN; Yu; WEN; Shizhu; MENG; Yonggang

    2004-01-01

    Based on conduction model and cubic particle model, the relationship between current density and shear yield stress of electrorheological (ER) fluids was calculated and compared with some reported experimental results. The conductivity of the insulating oils is found to have been changed by the mixed particles. Several ways to decrease insulating liquid conductivity and increase the conductivity ratio of ER fluids have been proposed to prepare ER fluids with high shear yield stresses but low current densities.

  5. THERMAL CONDUCTIVITY OF METALLIC WIRES

    Institute of Scientific and Technical Information of China (English)

    LU XIANG; GU JI-HUA; CHU JUN-HAO

    2001-01-01

    The effect of radial thickness on the thermal conductivity of a free standing wire is investigated. The thermal conductivity is evaluated using the Boltzmann equation. A simple expression for the reduction in conductivity due to the increase of boundary scattering is presented. A comparison is made between the experimental results of indium wires and the theoretical calculations. It is shown that this decrease of conductivity in wires is smaller than that in film where heat flux is perpendicular to the surface.

  6. A pore water conductivity sensor

    NARCIS (Netherlands)

    Hilhorst, M.A.

    2001-01-01

    The electrical permittivity and conductivity of the bulk soil are a function of the permittivity and conductivity of the pore water. For soil water contents higher than 0.10 both functions are equal, facilitating in situ conductivity measurements of the pore water. A novel method is described, based

  7. Hydraulic conductivity of organomodified soil

    Energy Technology Data Exchange (ETDEWEB)

    Wallace, R.B.; Grant, J.M.; Voice, T.C.; Rakhshandehroo, G.; Xu, S.; Boyd, S.A. [Michigan State Univ., East Lansing, MI (United States)

    1995-11-01

    The effects of organomodification on soil hydraulic conductivity were investigated. Hydraulic conductivity and porosity of treated and untreated samples of a sandy loam were measured as a function of effective stress. Batch treatment with hexadecyltrimethyl ammonium (HDTMA) and dry packing produced organomodified samples that were 79% less conducive than untreated samples prior to loading. Treated samples lost less hydraulic conductivity as a result of loading than untreated samples so that treated samples had higher conductivity at high loads. Observed differences in conductivity are explained in terms of the role of the treated and untreated clay in controlling initial effective pore size and its change during consolidation.

  8. Conductive nanomaterials for printed electronics.

    Science.gov (United States)

    Kamyshny, Alexander; Magdassi, Shlomo

    2014-09-10

    This is a review on recent developments in the field of conductive nanomaterials and their application in printed electronics, with particular emphasis on inkjet printing of ink formulations based on metal nanoparticles, carbon nanotubes, and graphene sheets. The review describes the basic properties of conductive nanomaterials suitable for printed electronics (metal nanoparticles, carbon nanotubes, and graphene), their stabilization in dispersions, formulations of conductive inks, and obtaining conductive patterns by using various sintering methods. Applications of conductive nanomaterials for electronic devices (transparent electrodes, metallization of solar cells, RFID antennas, TFTs, and light emitting devices) are also briefly reviewed.

  9. 49 CFR 199.237 - Other alcohol-related conduct.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Other alcohol-related conduct. 199.237 Section 199.237 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS... TESTING Alcohol Misuse Prevention Program § 199.237 Other alcohol-related conduct. (a) No operator shall...

  10. 42 CFR 498.49 - Conduct of prehearing conference.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Conduct of prehearing conference. 498.49 Section 498.49 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... IN THE MEDICAID PROGRAM Hearings § 498.49 Conduct of prehearing conference. (a) The prehearing...

  11. Electrical Conductivity of the Carbon Fiber Conductive Concrete

    Institute of Scientific and Technical Information of China (English)

    HOU Zuofu; LI Zhuoqiu; WANG Jianjun

    2007-01-01

    This paper discussed two methods to enhance the electrical conductivity of the carbon fiber(CF) electrically conductive concrete. The increase in the content of stone and the amount of water used to dissolve the methylcellulose and marinate the carbon fibers can decrease the electrical resistivity of the electrically conductive concrete effectively. Based on these two methods, the minimum CF content of the CF electrically conductive concrete for deicing or snow-melting application and the optimal ratio of the amount of water to dissolve the methylcellulose and marinate the carbon fibers were obtained.

  12. Interpretation of stress damage on fracture conductivity

    Energy Technology Data Exchange (ETDEWEB)

    Berumen, Sergio; Tiab, Djebbar [PEMEX E and P and The University of Oklahoma, School of Petroleum and Geological Engineering, Norman, OK (United States)

    1997-02-01

    This paper focuses on the investigation of pressure responses in a well producing through a composite system of a stress-sensitive vertical symmetric or asymmetric fracture interacting with a stress-sensitive permeable-porous medium. Results of this investigation demonstrate that when the fracture conductivity is stress dependent, the use of conventional techniques to evaluate fractured wells may lead to incorrect estimates of the fracture-formation properties. For finite conductivity fractures, the stress effects in the formation have a negligible influence on the absolute value of the slope that defines the pseudo-bilinear flow regime. During this flow regime only the pressure sensitivity in the fracture and the fracture conductivity govern this flow period. For cases that involve highly conductive fractures, it was found that the slope of 0.5 which defines the linear flow regime is not influenced by the stress effect of the fracture and formation. However, stress in highly conductive fractures has a measurable influence in the change of conductivity. The occurrence of the stress damage in finite and infinite conductivity fractures is due to the partial closure fracture or partial choke fracture effect and can be anticipated in terms of pressure or time level by using the equations provided in this work. The results derived from this research have a major impact in improving the analysis of fractured wells pressure responses, as well as in forecasting of fracture closure occurrence and in programming stimulation operations in fractured wells. An example with synthetic data is presented to illustrate these new findings

  13. Theoretical approaches to superionic conductivity

    Indian Academy of Sciences (India)

    C S Sunandana; P Senthil Kumar

    2004-02-01

    Recent theoretical approaches to the understanding of superionic conductivity in polycrystalline, glassy and polymeric materials are briefly reviewed. Phase transitions to the superionic conducting state in the AgI family are apparently triggered by cluster formation and strong mobile ion interaction within the clusters. Anomalous conductivity and related physical properties are explained in the cluster induced distortion model. Ionic composites such as AgX : Al2O3 ( = Cl, Br and I) involve conducting and non-conducting phases and the all-important interface between the two whose space charge enhances the conductivity and also trigger phase transitions to exotic polymorphic phases, for which the mechanisms are yet to be explored. Ion hopping dynamics controls the conductivity of superionic glasses. Mode coupling and jump relaxation theories account for the non-Debye relaxation observed in a.c. conductivity of these glasses. The theory of conductivity in polymer electrolytes-still in its infancy-involves their complex structure and glass transition behaviour. Preparative and thermal history, composition and crystallinity control ionic conductivity. New approaches to the synthesis of optimal polymer electrolytes such as rubbery electrolytes, crystalline polymers and nanocomposites must be considered before achieving a comprehensive theoretical understanding.

  14. Thermoelectric Properties of Conducting Polymers

    Science.gov (United States)

    1994-07-01

    conductivity of highly ordered pyrolytic graphite and benzene-derived graphite fiber. For a heat treament temperature (HTT) of 2900 °C, the unstretched film has... heat transmission is 5 important. The electrons responsible for electrical conductivity in metals also allow heat transmission by electrons, K. in Fig. 1... Heat transmission in polymers is by means of lattice vibrations, K, which do not contribute to electrical conductvity. Previous work with conducting

  15. Thermal conductivity of boron carbides

    Science.gov (United States)

    Wood, C.; Emin, D.; Gray, P. E.

    1985-01-01

    Knowledge of the thermal conductivity of boron carbide is necessary to evaluate its potential for high-temperature thermoelectric energy conversion applications. Measurements have been conducted of the thermal diffusivity of hot-pressed boron carbide BxC samples as a function of composition (x in the range from 4 to 9), temperature (300-1700 K), and temperature cycling. These data, in concert with density and specific-heat data, yield the thermal conductivities of these materials. The results are discussed in terms of a structural model that has been previously advanced to explain the electronic transport data. Some novel mechanisms for thermal conduction are briefly discussed.

  16. Holographic Conductivity in Disordered Systems

    CERN Document Server

    Ryu, Shinsei; Ugajin, Tomonori

    2011-01-01

    The main purpose of this paper is to holographically study the behavior of conductivity in 2+1 dimensional disordered systems. We analyze probe D-brane systems in AdS/CFT with random closed string and open string background fields. We give a prescription of calculating the DC conductivity holographically in disordered systems. In particular, we find an analytical formula of the conductivity in the presence of codimension one randomness. We also systematically study the AC conductivity in various probe brane setups without disorder and find analogues of Mott insulators.

  17. Protocols for conducting Environmental Management Assessments of DOE organizations

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-01

    To assess the effectiveness of DOE`s environmental programs, the Office of Environmental Audit conducts Environmental Management Assessments of DOE programs and facilities. These assessments take a broad programmatic view of environmental systems which may cover multiple sites. The focus of the assessment is on the infrastructure, systems, programs, and tools to manage environmental issues, not on the compliance issues themselves. Protocols have been developed to assist in the conduct of Environmental Management Assessments. The protocols are, based on and serve as implementing guidelines for the Environmental Management Section of ``Performance Objectives and Criteria for Conducting DOE Environmental Audits`` (DOE/EH-022). They are intended to provide guidance to the Assessment Team in conducting these reviews.

  18. TOPS optical correlation program

    Science.gov (United States)

    Lindell, Scott D.

    1993-09-01

    Martin Marietta is conducting a TOPS optical correlation program in which several algorithms and four optical correlators involving two spatial light modulator technologies will be developed and tested. The program will culminate in 1994 with an automatic target recognition flight demonstration using a UH-1 helicopter flying a Fiber Optic Guide Missile (FOG-M) mission profile. The flight demonstration will be conducted by US Army Missile Command (MICOM) and Martin Marietta and will involve detecting, locating and tracking a M60A2 tank positioned among an array of five vehicle types. Current status of the TOPS program will be given.

  19. Method for conducting nonlinear electrochemical impedance spectroscopy

    Science.gov (United States)

    Adler, Stuart B.; Wilson, Jamie R.; Huff, Shawn L.; Schwartz, Daniel T.

    2015-06-02

    A method for conducting nonlinear electrochemical impedance spectroscopy. The method includes quantifying the nonlinear response of an electrochemical system by measuring higher-order current or voltage harmonics generated by moderate-amplitude sinusoidal current or voltage perturbations. The method involves acquisition of the response signal followed by time apodization and fast Fourier transformation of the data into the frequency domain, where the magnitude and phase of each harmonic signal can be readily quantified. The method can be implemented on a computer as a software program.

  20. Method for conducting nonlinear electrochemical impedance spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Adler, Stuart B.; Wilson, Jamie R.; Huff, Shawn L.; Schwartz, Daniel T.

    2015-06-02

    A method for conducting nonlinear electrochemical impedance spectroscopy. The method includes quantifying the nonlinear response of an electrochemical system by measuring higher-order current or voltage harmonics generated by moderate-amplitude sinusoidal current or voltage perturbations. The method involves acquisition of the response signal followed by time apodization and fast Fourier transformation of the data into the frequency domain, where the magnitude and phase of each harmonic signal can be readily quantified. The method can be implemented on a computer as a software program.

  1. Minimum Thermal Conductivity of Superlattices

    Energy Technology Data Exchange (ETDEWEB)

    Simkin, M. V.; Mahan, G. D.

    2000-01-31

    The phonon thermal conductivity of a multilayer is calculated for transport perpendicular to the layers. There is a crossover between particle transport for thick layers to wave transport for thin layers. The calculations show that the conductivity has a minimum value for a layer thickness somewhat smaller then the mean free path of the phonons. (c) 2000 The American Physical Society.

  2. Conductive Mechanism of Organic Conductor

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Organic conductor is a kind of organic compound which has special electronic and magnetic properties. The research of the organic compounds has received considerable attention because of their potential applications in many areas. The molecular conductive units are theoretically investigated as well as their energy gap and charge distribution. The relationship of conductivity and micro-mechanism is discussed.

  3. Thermal conductivity of supercooled water.

    Science.gov (United States)

    Biddle, John W; Holten, Vincent; Sengers, Jan V; Anisimov, Mikhail A

    2013-04-01

    The heat capacity of supercooled water, measured down to -37°C, shows an anomalous increase as temperature decreases. The thermal diffusivity, i.e., the ratio of the thermal conductivity and the heat capacity per unit volume, shows a decrease. These anomalies may be associated with a hypothesized liquid-liquid critical point in supercooled water below the line of homogeneous nucleation. However, while the thermal conductivity is known to diverge at the vapor-liquid critical point due to critical density fluctuations, the thermal conductivity of supercooled water, calculated as the product of thermal diffusivity and heat capacity, does not show any sign of such an anomaly. We have used mode-coupling theory to investigate the possible effect of critical fluctuations on the thermal conductivity of supercooled water and found that indeed any critical thermal-conductivity enhancement would be too small to be measurable at experimentally accessible temperatures. Moreover, the behavior of thermal conductivity can be explained by the observed anomalies of the thermodynamic properties. In particular, we show that thermal conductivity should go through a minimum when temperature is decreased, as Kumar and Stanley observed in the TIP5P model of water. We discuss physical reasons for the striking difference between the behavior of thermal conductivity in water near the vapor-liquid and liquid-liquid critical points.

  4. Electrically conductive anodized aluminum coatings

    Science.gov (United States)

    Alwitt, Robert S. (Inventor); Liu, Yanming (Inventor)

    2001-01-01

    A process for producing anodized aluminum with enhanced electrical conductivity, comprising anodic oxidation of aluminum alloy substrate, electrolytic deposition of a small amount of metal into the pores of the anodized aluminum, and electrolytic anodic deposition of an electrically conductive oxide, including manganese dioxide, into the pores containing the metal deposit; and the product produced by the process.

  5. INFRARED EMISSIVITY OF CONDUCTING POLYMERS

    Institute of Scientific and Technical Information of China (English)

    WAN Meixiang; LI Suzhen; LI Junchao; DONG Haiou

    1991-01-01

    The infrared emissivity of conducting polymers in 8-20μm and at 50-150℃ in the direction of normal line has been measured as a function of wavelength, conductivity at room temperature,counterion, doping levels, measuring temperature and thickness of sample.

  6. Conducting polymers: Synthesis and industrial applications

    Energy Technology Data Exchange (ETDEWEB)

    Gottesfeld, S. [Los Alamos National Lab., NM (United States)

    1997-04-01

    The Conducting Polymer project funded by the AIM Program has developed new methods for the synthesis of conducting polymers and evaluated new industrial applications for these materials which will result in significant reductions in energy usage or industrial waste. The applications specifically addressed during FY 1996 included two ongoing efforts on membranes for gas separation and on electrochemical capacitors and a third new application: electrochemical reactors (ECRs) based on polymeric electrolytes. As a gas separation membrane, conducting polymers offer high selectivity and the potential to chemically or electrically adapt the membrane for specific gas combinations. Potential energy savings in the US for this application are estimated at 1 to 3 quads/yr. As an active material in electrochemical capacitors, electronically conducting polymers have the potential of storing large amounts of electric energy in low cost materials. Potential energy savings estimated at 1 quad/yr would result from introduction of electrochemical capacitors as energy storage devices in power trains of electric and hybrid vehicles, once such vehicles reach 20% of the total transportation market in the US. In the chlor-alkali industry, electrochemical reactors based on polymer electrolyte membranes consume around 1 % of the total electric power in the US. A new activity, started in FY 1996, is devoted to energy efficient ECRs. In the case of the chlor-alkali industry, energy savings as high as 50% seem possible with the novel ECR technology demonstrated by the author in 1996.

  7. Intraatrial conduction disturbances: vectorcardiographic patterns.

    Science.gov (United States)

    Zoneraich, O; Zoneraich, S

    1976-04-01

    Frank P loop vectorcardiograms were recorded in 30 normal subjects and in 40 patients who had intraatrial conduction disturbances alone or in association with cardiac disease. High magnification of the P loop (0.1 mv = 3 cm) permitted accurate measurement of the P loop duration, magnitude and direction. High-frequency recordings allowed optimal evaluation of the notches, bites and conduction delays in the PsE loop. Four vectorcardiographic patterns have been selected as counterparts of the four types of enlarged P waves seen in electrocardiograms of patients with atrial conduction disturbances. When intraatrial conduction disturbances coexisted with left atrial enlargment, the PsE loop was larger and smoother. The role of partial or complete block in the specific internodal or interatrial pathways is discussed. High magnification, high-frequency vectorcardiography of the P loop seems to be the best available method for determing a specific pattern of intraatrial conduction disturbance.

  8. Thermal conductance through molecular wires

    CERN Document Server

    Segal, D; Nitzan, A; Segal, Dvira; Nitzan, Abraham; Hanggi, Peter

    2003-01-01

    We consider phononic heat transport through molecular chains connecting two thermal reservoirs. For relatively short molecules at normal temperatures heat conduction is dominated by the harmonic part of the molecular force-field. We develop a general theory for the heat conduction through harmonic chains in 3-dimensions. A Landauer-type expression for the heat conduction is obtained, in agreement with other recent studies. We use this formalism to study the heat conduction properties of alkanes. For relatively short (1-30 carbon atoms) chains the length and temperature dependence of the molecular heat conduction result from the balance of three factors: (i) The molecular frequency spectrum in relation to the frequency cutoff of the thermal reservoirs, (ii) the degree of localization of the molecular normal modes and (iii) the molecule-heat reservoirs coupling. The fact that molecular modes at different frequency regimes have different localization properties gives rise to intricate dependence of the heat cond...

  9. Conductive polymer-based material

    Science.gov (United States)

    McDonald, William F.; Koren, Amy B.; Dourado, Sunil K.; Dulebohn, Joel I.; Hanchar, Robert J.

    2007-04-17

    Disclosed are polymer-based coatings and materials comprising (i) a polymeric composition including a polymer having side chains along a backbone forming the polymer, at least two of the side chains being substituted with a heteroatom selected from oxygen, nitrogen, sulfur, and phosphorus and combinations thereof; and (ii) a plurality of metal species distributed within the polymer. At least a portion of the heteroatoms may form part of a chelation complex with some or all of the metal species. In many embodiments, the metal species are present in a sufficient concentration to provide a conductive material, e.g., as a conductive coating on a substrate. The conductive materials may be useful as the thin film conducting or semi-conducting layers in organic electronic devices such as organic electroluminescent devices and organic thin film transistors.

  10. Thermal conductivity of graphene laminate.

    Science.gov (United States)

    Malekpour, H; Chang, K-H; Chen, J-C; Lu, C-Y; Nika, D L; Novoselov, K S; Balandin, A A

    2014-09-10

    We have investigated thermal conductivity of graphene laminate films deposited on polyethylene terephthalate substrates. Two types of graphene laminate were studied, as deposited and compressed, in order to determine the physical parameters affecting the heat conduction the most. The measurements were performed using the optothermal Raman technique and a set of suspended samples with the graphene laminate thickness from 9 to 44 μm. The thermal conductivity of graphene laminate was found to be in the range from 40 to 90 W/mK at room temperature. It was found unexpectedly that the average size and the alignment of graphene flakes are more important parameters defining the heat conduction than the mass density of the graphene laminate. The thermal conductivity scales up linearly with the average graphene flake size in both uncompressed and compressed laminates. The compressed laminates have higher thermal conductivity for the same average flake size owing to better flake alignment. Coating plastic materials with thin graphene laminate films that have up to 600× higher thermal conductivity than plastics may have important practical implications.

  11. Edge conduction in vacuum glazing

    Energy Technology Data Exchange (ETDEWEB)

    Simko, T.M.; Collins, R.E. [Sydney Univ., NSW (Australia). Dept. of Applied Physics; Beck, F.A.; Arasteh, D. [Lawrence Berkeley Lab., CA (United States)

    1995-03-01

    Vacuum glazing is a form of low-conductance double glazing using in internal vacuum between the two glass sheets to eliminate heat transport by gas conduction and convection. An array of small support pillars separates the sheets; fused solder glass forms the edge seal. Heat transfer through the glazing occurs by radiation across the vacuum gap, conduction through the support pillars, and conduction through the bonded edge seal. Edge conduction is problematic because it affects stresses in the edge region, leading to possible failure of the glazing; in addition, excessive heat transfer because of thermal bridging in the edge region can lower overall window thermal performance and decrease resistance to condensation. Infrared thermography was used to analyze the thermal performance of prototype vacuum glazings, and, for comparison, atmospheric pressure superwindows. Research focused on mitigating the edge effects of vacuum glazings through the use of insulating trim, recessed edges, and framing materials. Experimentally validated finite-element and finite-difference modeling tools were used for thermal analysis of prototype vacuum glazing units and complete windows. Experimental measurements of edge conduction using infrared imaging were found to be in good agreement with finite-element modeling results for a given set of conditions. Finite-element modeling validates an analytic model developed for edge conduction.

  12. Hydraulic conductivity of compacted zeolites.

    Science.gov (United States)

    Oren, A Hakan; Ozdamar, Tuğçe

    2013-06-01

    Hydraulic conductivities of compacted zeolites were investigated as a function of compaction water content and zeolite particle size. Initially, the compaction characteristics of zeolites were determined. The compaction test results showed that maximum dry unit weight (γ(dmax)) of fine zeolite was greater than that of granular zeolites. The γ(dmax) of compacted zeolites was between 1.01 and 1.17 Mg m(-3) and optimum water content (w(opt)) was between 38% and 53%. Regardless of zeolite particle size, compacted zeolites had low γ(dmax) and high w(opt) when compared with compacted natural soils. Then, hydraulic conductivity tests were run on compacted zeolites. The hydraulic conductivity values were within the range of 2.0 × 10(-3) cm s(-1) to 1.1 × 10(-7) cm s(-1). Hydraulic conductivity of all compacted zeolites decreased almost 50 times as the water content increased. It is noteworthy that hydraulic conductivity of compacted zeolite was strongly dependent on the zeolite particle size. The hydraulic conductivity decreased almost three orders of magnitude up to 39% fine content; then, it remained almost unchanged beyond 39%. Only one report was found in the literature on the hydraulic conductivity of compacted zeolite, which is in agreement with the findings of this study.

  13. Electrically conductive and thermally conductive materials for electronic packaging

    Science.gov (United States)

    Liu, Zongrong

    The aim of this dissertation is to develop electrically or thermally conductive materials that are needed for electronic packaging and microelectronic cooling. These materials are in the form of coatings and are made from pastes. The research work encompasses paste formulation, studying the process of converting a paste to a conductive material, relating the processing conditions to the structure and performance, and evaluating performance attributes that are relevant to the application of these conductive materials. The research has resulted in new information that is valuable to the microelectronic industry. Work on electrically conductive materials emphasizes the development of electrical interconnection materials in the form of air-firable glass-free silver-based electrically conductive thick films, which use the Ti-Al alloy as the binder and are in contrast to conventional films that use glass as the binder. The air-firability, as enabled by minor additions of tin and zinc to the paste, is in contrast to previous glass-free films that are not firable. The recommended firing condition is 930°C in air. The organic vehicle in the paste comprises ethyl cellulose, which undergoes thermal decomposition during burnout of the paste. The ethyl cellulose is dissolved in ether, which facilitates the burnout. Excessive ethyl cellulose hinders the burnout. A higher heating rate results in more residue after burnout. The presence of silver particles facilitates drying and burnout. Firing in air gives lower resistivity than firing in oxygen. Firing in argon gives poor films. Compared to conventional films that use glass as the binder, these films, when appropriately fired, exhibit lower electrical resistivity (2.5 x 10-6 O.cm) and higher scratch resistance. Work on thermally conductive materials addresses thermal interface materials, which are materials placed at the interface between a heat sink and a heat source for the purpose of improving the thermal contact. Heat

  14. Electrical Conductivity of Cryolite Melts

    Science.gov (United States)

    Fellner, P.; Grjotheim, K.; Kvande, H.

    1985-11-01

    This paper proposes an equation for the electrical conductivity of multicomponent cryolite-based mixtures. The equation is based on a physical model which assumes that the conductivity is proportional to the number density of the effective electric charges in the melt. The various authors in the available literature show a great discrepancy in conductivity data of cryolite-based melts. The equation based on the physical model enables determination of which set of data is preferable. Special consideration in this respect is given to the influence of magnesium flouride and lithium flouride additions to the melt.

  15. Conducting polymer 3D microelectrodes

    DEFF Research Database (Denmark)

    Sasso, Luigi; Vazquez, Patricia; Vedarethinam, Indumathi

    2010-01-01

    Conducting polymer 3D microelectrodes have been fabricated for possible future neurological applications. A combination of micro-fabrication techniques and chemical polymerization methods has been used to create pillar electrodes in polyaniline and polypyrrole. The thin polymer films obtained...

  16. Conducting Polymers: Emerging Commercial Materials

    Directory of Open Access Journals (Sweden)

    N. Kumar

    1996-04-01

    Full Text Available Conducting polymers are materials of recent origin. They are obtained by polymerisation of simple organic monomers and doping with electron acceptor or donor species and show conductivity ranging from that of a semiconductor to that of metal. These materials are now available with unique electronic and optical properties of metals and semiconductors in combination with the attractive mechanical and processable advantages of polymers. The field has progressed to a level of maturity consistent with a new set of opportunities to develop Wide range of applications based upon conducting polymers as materials for industrial products.Examples include: static charge dissipation, EMI shielding, flexible light emitting diodes, transparent electrodes, batteries, gas sensors, gas separators, etc. Many of the conducting polymers and devices based on them are now available commercially.

  17. Thermally conducting electron transfer polymers

    Science.gov (United States)

    Byrd, N. R.; Jenkins, R. K.; Lister, J. L.

    1969-01-01

    New polymeric material exhibits excellent physical shock protection, high electrical resistance, and thermal conductivity. It is especially useful for electronic circuitry, such as subminiaturization of components and modular construction of circuits.

  18. NOAA NOS SOS, EXPERIMENTAL - Conductivity

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NOAA NOS SOS server is part of the IOOS DIF SOS Project. The stations in this dataset have conductivity data. *These services are for testing and evaluation use...

  19. Heat conduction mechanism in nanofluids

    Energy Technology Data Exchange (ETDEWEB)

    Pang, Changwei; Hong, Hi ki [Kyung Hee University, Yongin (Korea, Republic of); Kang, Yong Tae; Lee, Jae Won [Korea University, Seoul (Korea, Republic of)

    2014-07-15

    Nanofluids are produced by dispersing nanoparticles in basefluid. Given its superior thermo-physical properties, nanofluids are gaining increasing attention and are showing promising potential in various applications. Numerous studies have been conducted in the past decade to experimentally and theoretically investigate thermal conductivity. The experimental finding is briefly summarized in this study; however, we do not intend to present a systematic summary of the available references from the literature. The primary objective of this study is to review and summarize the most debated mechanisms for heat conduction in nanofluids, such as the effects of a nanolayer, the Brownian motion of nanoparticles and aggregation, as well as induced convection. Finally, at a low concentration of nanoparticles, nanoconvection is the leading contributor to thermal conductivity enhancement, whereas at a higher concentration, the natural thermal transport along the backbone would aggregate, and the effects of the nanolayer would become significant and become ineligible.

  20. Shape memory thermal conduction switch

    Science.gov (United States)

    Vaidyanathan, Rajan (Inventor); Krishnan, Vinu (Inventor); Notardonato, William U. (Inventor)

    2010-01-01

    A thermal conduction switch includes a thermally-conductive first member having a first thermal contacting structure for securing the first member as a stationary member to a thermally regulated body or a body requiring thermal regulation. A movable thermally-conductive second member has a second thermal contacting surface. A thermally conductive coupler is interposed between the first member and the second member for thermally coupling the first member to the second member. At least one control spring is coupled between the first member and the second member. The control spring includes a NiTiFe comprising shape memory (SM) material that provides a phase change temperature <273 K, a transformation range <40 K, and a hysteresis of <10 K. A bias spring is between the first member and the second member. At the phase change the switch provides a distance change (displacement) between first and second member by at least 1 mm, such as 2 to 4 mm.

  1. Conduction mechanism in boron carbide

    Science.gov (United States)

    Wood, C.; Emin, D.

    1984-01-01

    Electrical conductivity, Seebeck-coefficient, and Hall-effect measurements have been made on single-phase boron carbides, B(1-x)C(x), in the compositional range from 0.1 to 0.2 X, and between room temperature and 1273 K. The results indicate that the predominant conduction mechanism is small-polaron hopping between carbon atoms at geometrically inequivalent sites.

  2. Good Conduct in the Sciences

    DEFF Research Database (Denmark)

    Hansen, Vagn Lundsgaard

    2006-01-01

    What is scientific dishonesty? How to handle the problem? How to prevent it? These three questions are discussed in an international perspective, focusing on ways of achieving and maintaining good conduct in the sciences.......What is scientific dishonesty? How to handle the problem? How to prevent it? These three questions are discussed in an international perspective, focusing on ways of achieving and maintaining good conduct in the sciences....

  3. Anisotropic heat conduction in diacetylenes

    Science.gov (United States)

    Morelli, D. T.; Heremans, J.; Sakamoto, M.; Uher, C.

    1986-08-01

    Measurements of the low-temperature thermal conductivity of diacetylene single crystals are reported. Monomer samples show little anisotropy and display the temperature dependence of a crystalline dielectric. In polymerized samples, heat is conducted up to 60 times better parallel to the chains than perpendicular to them. Dislocations can account for this anisotropy at the lowest temperatures. Quasi one dimensionality of the polymer crystals induces anisotropy at higher temperatures and strongly suppresses anharmonic phonon interactions.

  4. Do dialysate conductivity measurements provide conductivity clearance or ionic dialysance?

    Science.gov (United States)

    Petitclerc, T

    2006-11-01

    Dialysate conductivity measurements allow on-line estimation of urea clearance during hemodialysis session. Conductivity measurements provide a value of 'conductivity clearance' for some authors, but a value of 'ionic dialysance' for others. This paper aims at explaining which term should be the more appropriate. Clearance is a parameter defined for measuring the power of a mechanism, which aims at 'clearing' a solution by depurating some solutes. In hemodialysis, clearance measures the efficacy of patient's depuration. In contrast, dialysance measures the capability of transferring solutes between blood and dialysate. The conventional definition of dialysance, requiring the absence of convective transfer, should be generalized to the case of the usual presence of ultrafiltration during the hemodialysis session. For a solute (as urea) absent from the dialysate delivered to the dialyzer inlet, the clearance is equal to its dialysance. In order to avoid a dramatic fall in ionic concentrations during hemodialysis treatment, the clearance of ions is reduced by adding these ions in the dialysate and becomes lower than their dialysance. Conductivity measurements provide a value of electrolytes dialysance. Thus the term of 'ionic dialysance' is more appropriate than the term of 'conductivity clearance'. Nevertheless ionic dialysance represents a good estimation of urea clearance.

  5. Studies on Nanocomposite Conducting Coatings

    Directory of Open Access Journals (Sweden)

    Amitava Bhattacharyya

    2013-01-01

    Full Text Available Nanocomposite conducting coatings can impart stable surface electrical conductivity on the substrate. In this paper, carbon nanofiber (CNF and nanographite (NG are dispersed in thermoplastic polyurethane matrix and coated on the surface of glass and polyethylene terephthalate (PET film. The nanoparticles dispersion was studied under TEM. The coating thicknesses were estimated. Further, their resistance and impedance were measured. It has been observed that the 5 wt% CNF dispersed nanocomposite coatings show good conductivity. The use of NG can bring down the amount of CNF; however, NG alone has failed to show significant improvement in conductivity. The nanocomposite coating on PET film using 2.5 wt% of both CNF and NG gives frequency-independent impedance which indicates conducting network formation by the nanoparticles. The study was carried out at different test distances on nanocomposite coated PET films to observe the linearity and continuity of the conducting network, and the result shows reasonable linearity in impedance over total test length (from 0.5 cm to 4.5 cm. The impedance of nanocomposite coatings on glass is not frequency independent and also not following linear increase path with distance. This indicates that the dispersion uniformity is not maintained in the coating solution when it was coated on glass.

  6. Impulse propagation in a conducting medium with arbitrary thermal conductivity

    Energy Technology Data Exchange (ETDEWEB)

    Myasnikov, S.P.

    1977-07-01

    An examination is made of impulse propagation in a conducting medium that accounts for its thermal conductivity. Such a medium, even with an infinitely large electric conductivity, will have a weak dispersion. Following dispersion through a sufficiently large time interval, out of the entire set of planar waves comprising a wave packet, only the low-frequency components were shown to remain (these are the components that are propagated at a velocity of c/sub s/) along with the high-frequency components that are propagated at the speed of c/sub T/. Consequently, the initial derangement is converted into two separate waves of a bell-shaped form that run to various sides at a phase velocity equal to the adiabatic speed of sound c/sub s/. 6 references.

  7. Air conducted and body conducted sound produced by own voice

    DEFF Research Database (Denmark)

    Hansen, Mie Østergaard

    1998-01-01

    When we speak, sound reaches our ears both through the air, from the mouth to ear, and through our body, as vibrations. The ratio between the air borne and body conducted sound has been studied in a pilot experiment where the air borne sound was eliminated by isolating the ear with a large...

  8. Conductance measurements on bismuth nanobridges

    Energy Technology Data Exchange (ETDEWEB)

    Pernau, H.F.; Schirm, C.; Scheer, E. [Univ. of Konstanz (Germany) Dept. of Physics

    2007-07-01

    By electron beam lithography and reactive ion etching we fabricate freestanding metallic bismuth nano-bridges which serve as starting point for arranging atomic-size and tunnel contacts with the help of the mechanically controlled breakjunction technique. Since the bridges are broken in cryogenic vacuum, the contacts are free of oxygen or other contamination. The transport measurements are performed in a {sup 3}He cryostat in the temperature range from 0.25 K up to 2 K and in transverse magnetic fields up to 8 T. After determining the preferred conductance values by recording conductance histograms, we study the conductance as a function of temperature, bias voltage and magnetic field at various contact values corresponding to those preferred conductance values. We observe reproducible conductance fluctuations as a function of both bias voltage and magnetic field and a well pronounced zero-bias anomaly which is modulated periodically with the magnetic field. We interprete our data in terms of phase coherent transport and onsetting superconductivity due to the granular structure of the film. (orig.)

  9. Electrical conductivity of chondritic meteorites

    Science.gov (United States)

    Duba, AL; Didwall, E. M.; Burke, G. J.; Sonett, C. P.

    1987-01-01

    The electrical conductivity of samples of the Murchison and Allende carbonaceous chondrites is 4 to 6 orders of magnitude greater than rock forming minerals such as olivine for temperatures up to 700 C. The remarkably high electrical conductivity of these meteorites is attributed to carbon at the grain boundaries. Much of this carbon is produced by pyrolyzation of hydrocarbons at temperatures in excess of 150 C. As the temperature increases, light hydrocarbons are driven off and a carbon-rich residue or char migrates to the grain boundaries enhancing electrical conductivity. Assuming that carbon was present at the grain boundaries in the material which comprised the meteorite parent bodies, the electrical heating of such bodies was calculated as a function of body size and solar distance during a hypothetical T-Tauri phase of the sun. Input conductivity data for the meteorite parent body were the present carbonaceous chondrite values for temperatures up to 840 C and the electrical conductivity values for olivine above 840 C.

  10. Overview Of Federal And State Programs

    Science.gov (United States)

    Snow, Frank J.

    1981-01-01

    Energy audits are a major component of a number of Federal and State energy conservation programs. To various degrees, these programs provide an opportunity for the application of infrared remote sensing (thermography) to the conduct of these audits. The following programs are reviewed and an indication given of how each might make use of infrared as an audit tool: o Residential Conservation Service Program o Schools and Hospitals Program o Federal Energy Management Program o State Energy Grants Program o Weatherization Assistance Program o Energy Extension Service Program o Industrial Energy Conservation Program

  11. Conductive mechanism in manganite materials

    Science.gov (United States)

    Liu, Xianming; Zhu, Hong; Zhang, Yuheng

    2002-01-01

    We describe a model in which f(T)=M(T)/Mmax represents both the fraction of the itinerant electron density in the double-exchange (DE) theory and the magnetization σ in the current carrier density collapse (CCDC) theory. With this model, we have checked the DE and CCDC theories with our experimental results of the transport behavior. The DE theory yields agreement with the experimental resistivity excellently, in which the conductivity is the sum of the polaronic and itinerant electronic conductivity for the insulator-metal transition regime. The fitting curves of the resistivity by the CCDC theory deviate from the experiment seriously. This might be caused by the improper assumption of the temperature-dependent carrier density and the temperature-independent carrier mobility. Therefore, it is concluded that the DE theory is more suitable to explain the conductive mechanism in perovskite manganites.

  12. Thermal Conductivity of Foam Glass

    DEFF Research Database (Denmark)

    Petersen, Rasmus Rosenlund; König, Jakob; Yue, Yuanzheng

    Due to the increased focus on energy savings and waste recycling foam glass materials have gained increased attention. The production process of foam glass is a potential low-cost recycle option for challenging waste, e.g. CRT glass and industrial waste (fly ash and slags). Foam glass is used...... as thermal insulating material in building and chemical industry. The large volume of gas (porosity 90 – 95%) is the main reason of the low thermal conductivity of the foam glass. If gases with lower thermal conductivity compared to air are entrapped in the glass melt, the derived foam glass will contain...... only closed pores and its overall thermal conductivity will be much lower than that of the foam glass with open pores. In this work we have prepared foam glass using different types of recycled glasses and different kinds of foaming agents. This enabled the formation of foam glasses having gas cells...

  13. Conducting Polymer 3D Microelectrodes

    Directory of Open Access Journals (Sweden)

    Jenny Emnéus

    2010-12-01

    Full Text Available Conducting polymer 3D microelectrodes have been fabricated for possible future neurological applications. A combination of micro-fabrication techniques and chemical polymerization methods has been used to create pillar electrodes in polyaniline and polypyrrole. The thin polymer films obtained showed uniformity and good adhesion to both horizontal and vertical surfaces. Electrodes in combination with metal/conducting polymer materials have been characterized by cyclic voltammetry and the presence of the conducting polymer film has shown to increase the electrochemical activity when compared with electrodes coated with only metal. An electrochemical characterization of gold/polypyrrole electrodes showed exceptional electrochemical behavior and activity. PC12 cells were finally cultured on the investigated materials as a preliminary biocompatibility assessment. These results show that the described electrodes are possibly suitable for future in-vitro neurological measurements.

  14. Conductivities in an anisotropic medium

    Science.gov (United States)

    Khimphun, Sunly; Lee, Bum-Hoon; Park, Chanyong

    2016-10-01

    In order to imitate the anisotropic medium of a condensed matter system, we take into account an Einstein-Maxwell-dilaton-axion model as a dual gravity theory where the anisotropy is caused by different momentum relaxations. This gravity model allows an anisotropic charged black hole solution. On this background, we investigate how the linear responses of vector modes like electric, thermoelectric, and thermal conductivities rely on the anisotropy. We find that the electric conductivity in the low frequency limit shows a Drude peak and that, in the intermediate frequency regime, it reveals the power law behavior. Specifically, when the anisotropy increases, the exponent of the power law becomes smaller. In addition, we find that a critical value for the anisotropy exists at which the dc conductivity reaches to its maximum value.

  15. Optical conductivity of curved graphene.

    Science.gov (United States)

    Chaves, A J; Frederico, T; Oliveira, O; de Paula, W; Santos, M C

    2014-05-07

    We compute the optical conductivity for an out-of-plane deformation in graphene using an approach based on solutions of the Dirac equation in curved space. Different examples of periodic deformations along one direction translates into an enhancement of the optical conductivity peaks in the region of the far- and mid-infrared frequencies for periodicities ∼100 nm. The width and position of the peaks can be changed by dialling the parameters of the deformation profiles. The enhancement of the optical conductivity is due to intraband transitions and the translational invariance breaking in the geometrically deformed background. Furthermore, we derive an analytical solution of the Dirac equation in a curved space for a general deformation along one spatial direction. For this class of geometries, it is shown that curvature induces an extra phase in the electron wave function, which can also be explored to produce interference devices of the Aharonov-Bohm type.

  16. Low Conductivity Thermal Barrier Coatings

    Science.gov (United States)

    Zhu, Dong-Ming

    2005-01-01

    Thermal barrier coatings will be more aggressively designed to protect gas turbine engine hot-section components in order to meet future engine higher fuel efficiency and lower emission goals. In this presentation, thermal barrier coating development considerations and requirements will be discussed. An experimental approach is established to monitor in real time the thermal conductivity of the coating systems subjected to high-heat-flux, steady-state and cyclic temperature gradients. Advanced low conductivity thermal barrier coatings have also been developed using a multi-component defect clustering approach, and shown to have improved thermal stability. The durability and erosion resistance of low conductivity thermal barrier coatings have been improved utilizing advanced coating architecture design, composition optimization, in conjunction with more sophisticated modeling and design tools.

  17. Conductivities in an anisotropic medium

    CERN Document Server

    Khimphun, Sunly; Park, Chanyong

    2016-01-01

    In order to imitate anisotropic medium of a condensed matter system, we take into account an Einstein-Maxwell-dilaton-axion model as a dual gravity theory where the anisotropy is caused by different momentum relaxations. This gravity model allows an anisotropic charged black hole solution. On this background, we investigate how the linear responses of vector modes like electric, thermoelectric, and thermal conductivities rely on the anisotropy. We find that the electric conductivity in low frequency limit shows a Drude peak and that in the intermediate frequency regime it reveals the power law behavior. Especially, when the anisotropy increases the exponent of the power law becomes smaller. In addition, we find that there exist a critical value for the anisotropy at which the DC conductivity reaches to its maximum value.

  18. Electric Conductivity of Phosphorus Nanowires

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jing-Xiang; LI Hui; ZHANG Xue-Qing; LIEW Kim-Meow

    2009-01-01

    We present the structures and electrical transport properties of nanowires made from different strands of phosphorus chains encapsulated in carbon nanotubes. Optimized by density function theory, our results indicate that the conductance spectra reveal an oscillation dependence on the size of wires. It can be seen from the density of states and current-voltage curves that the structure of nanowires affects their properties greatly. Among them,the DNA-like double-helical phosphorus nanowire exhibits the distinct characteristic of an approximately linear I - V relationship and has a higher conductance than others. The transport properties of phosphorus nanowires are highly correlated with their microstructures.

  19. Electroosmosis in conducting nanofluidic channels

    CERN Document Server

    Zhao, Cunlu

    2010-01-01

    Theoretical modeling of electroosmosis through conducting (ideally polarizable) nanochannels is reported. Based on the theory of induced charge electrokinetics, a novel nanofluidic system which possesses both adjustable ion selective characteristics and flexible flow control is proposed. Such nanofluidic devices operate only with very low gate control voltage applied on the conductive walls of nanochannels, and thus even can be energized by normal batteries. We believe that it is possible to use such metal-electrolyte configurations to overcome the difficulties met with conventional metal-isolator-electrolyte systems for nanofluidic applications.

  20. Selected soil thermal conductivity models

    Directory of Open Access Journals (Sweden)

    Rerak Monika

    2017-01-01

    Full Text Available The paper presents collected from the literature models of soil thermal conductivity. This is a very important parameter, which allows one to assess how much heat can be transferred from the underground power cables through the soil. The models are presented in table form, thus when the properties of the soil are given, it is possible to select the most accurate method of calculating its thermal conductivity. Precise determination of this parameter results in designing the cable line in such a way that it does not occur the process of cable overheating.

  1. Thermal Conductivity and Sintering Behavior of Advanced Thermal Barrier Coatings

    Science.gov (United States)

    Zhu, Dongming; Miller, Robert A.

    2002-01-01

    Advanced thermal barrier coatings, having significantly reduced long-term thermal conductivities, are being developed using an approach that emphasizes real-time monitoring of thermal conductivity under conditions that are engine-like in terms of temperatures and heat fluxes. This is in contrast to the traditional approach where coatings are initially optimized in terms of furnace and burner rig durability with subsequent measurement in the as-processed or furnace-sintered condition. The present work establishes a laser high-heat-flux test as the basis for evaluating advanced plasma-sprayed and physical vapor-deposited thermal barrier coatings under the NASA Ultra Efficient Engine Technology (UEET) Program. The candidate coating materials for this program are novel thermal barrier coatings that are found to have significantly reduced thermal conductivities due to an oxide-defect-cluster design. Critical issues for designing advanced low conductivity coatings with improved coating durability are also discussed.

  2. Force dependent metalloprotein conductance by conducting atomic force microscopy

    Science.gov (United States)

    Zhao, Jianwei; Davis, Jason J.

    2003-09-01

    Our ability to analyse charge transport through a biological macromolecule, pertinent to our understanding not only of biological redox processes but also, for example, to our interpretation of tunnelling imaging, remains a significant practical and theoretical issue. Though much information can be gained by carrying out such examinations at a molecular level, there exist few methods where such controlled analyses are, in fact, feasible. Here we report on the electron transport characteristics of a blue copper metalloprotein as characterized at a refined level by conductive-probe atomic force microscopy. The modulation of this conductance with compressional force has also been examined. Though highly resistive, observations are consistent with the ability of the protein matrix to mediate appreciable tunnelling current. This work, then, paves the way for designed implementation of biomacromolecules into electronic devices.

  3. Hybrid Silicon Nanostructures with Conductive Ligands and Their Microscopic Conductivity

    Science.gov (United States)

    Bian, Tiezheng; Peck, Jamie N.; Cottrell, Stephen P.; Jayasooriya, Upali A.; Chao, Yimin

    2016-09-01

    Silicon nanoparticles (SiNPs) functionalized with conjugated molecules are a promising potential pathway for generating an alternative category of thermoelectric materials. While the thermoelectric performance of materials based on phenylacetylene-capped SiNPs has been proven, their low conductivity is still a problem for their general application. A muon study of phenylacetylene-capped SiNPs was recently carried out using the HIFI spectrometer at the Rutherford Appleton Laboratory, measuring the avoided level-crossing spectra as a function of temperature. The results show a reduction in the measured line width of the resonance above room temperature, suggesting an activated behaviour for this system. This study shows that the muon study could be a powerful method for investigating microscopic conductivity of hybrid thermoelectric materials.

  4. DC electrical conductivity study of cerium doped conducting glass systems

    Science.gov (United States)

    Barde, R. V.; Waghuley, S. A.

    2013-06-01

    The glass samples of composition 60V2O5-5P2O5-(35-x)B2O3-xCeO2, (1 ≤ x ≤ 5) were prepared by the conventional melt quench method. The samples were characterized by X-ray diffraction and thermo gravimetric-differential thermal analysis. The glass transition temperature and crystallization temperature determined from TG-DTA analysis. The DC electrical conductivity has been carried out in the temperature range 303-473 K. The maximum conductivity and minimum activation energy were found to be 0.039 Scm-1 and 0.15 eV at 473 K for x=1, respectively.

  5. Electrical Conductivity in Transition Metals

    Science.gov (United States)

    Talbot, Christopher; Vickneson, Kishanda

    2013-01-01

    The aim of this "Science Note" is to describe how to test the electron-sea model to determine whether it accurately predicts relative electrical conductivity for first-row transition metals. In the electron-sea model, a metal crystal is viewed as a three-dimensional array of metal cations immersed in a sea of delocalised valence…

  6. Conductive Polymers via Reactive Aligomer.

    Science.gov (United States)

    1987-01-30

    properties are presumably due to the formation of dibenzothiophene units 7 .! 9 NADC-87038-60 and intermolecular crosslinking(1 6). Frommer and...2), 280, (1984). 17. J.E. Frommer and R.R. Chance, "Electrically Conductive Polymers", Encycoedia of Polymer Science and Engineering. V. 5, Second

  7. Conducting Simulation Studies in Psychometrics

    Science.gov (United States)

    Feinberg, Richard A.; Rubright, Jonathan D.

    2016-01-01

    Simulation studies are fundamental to psychometric discourse and play a crucial role in operational and academic research. Yet, resources for psychometricians interested in conducting simulations are scarce. This Instructional Topics in Educational Measurement Series (ITEMS) module is meant to address this deficiency by providing a comprehensive…

  8. Conducting miller-urey experiments

    National Research Council Canada - National Science Library

    Parker, Eric T; Cleaves, James H; Burton, Aaron S; Glavin, Daniel P; Dworkin, Jason P; Zhou, Manshui; Bada, Jeffrey L; Fernández, Facundo M

    2014-01-01

    ... the water was simultaneously heated. The purpose of this manuscript is to provide the reader with a general experimental protocol that can be used to conduct a Miller-Urey type spark discharge experiment, using a simplified 3 L reaction flask...

  9. Supporting planning and conducting experiments

    NARCIS (Netherlands)

    Riesen, van Siswa A.N.; Gijlers, Hannie; Anjewierden, Anjo; Jong, de Ton

    2016-01-01

    In inquiry learning learners design and conduct experiments. Learners experience difficulties with the involved processes and need guidance to design useful experiments. To guide students in this we created a configurable experiment design tool that is usable in multiple domains. The tool was tested

  10. How to Conduct Ethnographic Research

    Science.gov (United States)

    Sangasubana, Nisaratana

    2011-01-01

    The purpose of this paper is to describe the process of conducting ethnographic research. Methodology definition and key characteristics are given. The stages of the research process are described including preparation, data gathering and recording, and analysis. Important issues such as reliability and validity are also discussed.

  11. Supporting planning and conducting experiments

    NARCIS (Netherlands)

    van Riesen, Siswa; Gijlers, Aaltje H.; Anjewierden, Anjo Allert; de Jong, Anthonius J.M.; Looi, Chee-Kit; Polman, Joseph; Cress, Ulrike; Reimann, Peter

    2016-01-01

    In inquiry learning learners design and conduct experiments. Learners experience difficulties with the involved processes and need guidance to design useful experiments. To guide students in this we created a configurable experiment design tool that is usable in multiple domains. The tool was tested

  12. Thermal radiation of conducting nanoparticles

    CERN Document Server

    Martynenko, Y V; Martynenko, Yu. V.

    2005-01-01

    A simple and universal criterion was obtained for the thermal radiation energy loss efficiency by small conductive particles which include along with metals and graphite also most practically important metal carbides like tungsten carbide, titanium carbide and the number of others.

  13. Fluctuation conductivity in cuprate superconductors

    Indian Academy of Sciences (India)

    S N Bhatia

    2002-05-01

    We have measured the in-plane resistivity of Bi2Sr2CaCu2O8+ and Tl2Ba2CaCu2O8+ single crystals in the temperature range 70–300 K. The thermodynamic fluctuations in the conductivity of both the samples start around ∼ 125 K. We find the Lawrence and Doniach [1] model to be inadequate to describe the fluctuation conductivity in these materials. The modification suggested by Ramallo et al [4] where by the conductivity is enhanced due to the presence of two superconducting layers in each unit cell is also not adequate. We suggest the fluctuation conductivity to be reduced due to the reduction in the density of states (DOS) of the quasiparticles which results due to the formation of Cooper pairs at the onset of the fluctuations. The data agrees with the theory proposed by Dorin et al [5] which takes into account this reduction in DOS.

  14. Characterization and Conduction Mechanism of Highly Conductive Vanadate Glass

    Directory of Open Access Journals (Sweden)

    Tetsuaki Nishida

    2015-12-01

    Full Text Available This paper reviews recent studies of highly conductive barium iron vanadate glass with a composition of 20 BaO ∙ 10 Fe2O3 ∙ 70 V2O5 (in mol %. Isothermal annealing of the vanadate glass for several ten minutes at a given temperature, higher than glass transition temperature or crystallization temperature, caused an increase in σ. Substitution of CuI (3d10, ZnII (3d10 and CuII (3d9 for FeIII (3d5 was investigated to elucidate the effect of electron configuration on the conductivity (σ. A marked decrease in the activation energy of conduction (Ea was also observed after the annealing. Values of Ea were correlated to the energy gap between the donor level and the conduction band (CB in the n-type semiconductor model. Isothermal annealing of ZnII-substituted vanadate glass (20 BaO ∙ 5 ZnO ∙ 5 Fe2O3 ∙ 70 V2O5 at 450 °C for 30 min showed an increase in σ from 2.5 × 10–6 to 2.1 × 10–1 S cm–1, which was one order of magnitude larger than that of non-substituted vanadate glass (3.4 × 10–2 S cm–1. Under the same annealing condition, σ’s of 2.0 × 10–1 and 3.2 × 10–1 S cm–1 were observed for 20 BaO ∙ 5 Cu2O ∙ 5 Fe2O3 ∙ 70 V2O5 and 20 BaO ∙ 5 CuO ∙ 5 Fe2O3 ∙ 70 V2O5 glasses, respectively. These results demonstrate an increase in the carrier (electron density in the CB, primarily composed of anti-bonding 4s-orbitals.

  15. Electrically Conductive Anodized Aluminum Surfaces

    Science.gov (United States)

    Nguyen, Trung Hung

    2006-01-01

    Anodized aluminum components can be treated to make them sufficiently electrically conductive to suppress discharges of static electricity. The treatment was conceived as a means of preventing static electric discharges on exterior satin-anodized aluminum (SAA) surfaces of spacecraft without adversely affecting the thermal-control/optical properties of the SAA and without need to apply electrically conductive paints, which eventually peel off in the harsh environment of outer space. The treatment can also be used to impart electrical conductivity to anodized housings of computers, medical electronic instruments, telephoneexchange equipment, and other terrestrial electronic equipment vulnerable to electrostatic discharge. The electrical resistivity of a typical anodized aluminum surface layer lies between 10(exp 11) and 10(exp 13) Omega-cm. To suppress electrostatic discharge, it is necessary to reduce the electrical resistivity significantly - preferably to anodized surface becomes covered and the pores in the surface filled with a transparent, electrically conductive metal oxide nanocomposite. Filling the pores with the nanocomposite reduces the transverse electrical resistivity and, in the original intended outer-space application, the exterior covering portion of the nanocomposite would afford the requisite electrical contact with the outer-space plasma. The electrical resistivity of the nanocomposite can be tailored to a value between 10(exp 7) and 10(exp 12) Omega-cm. Unlike electrically conductive paint, the nanocomposite becomes an integral part of the anodized aluminum substrate, without need for adhesive bonding material and without risk of subsequent peeling. The electrodeposition process is compatible with commercial anodizing production lines. At present, the electronics industry uses expensive, exotic, electrostaticdischarge- suppressing finishes: examples include silver impregnated anodized, black electroless nickel, black chrome, and black copper. In

  16. Thermal Conductivity of Diamond Composites

    Directory of Open Access Journals (Sweden)

    Fedor M. Shakhov

    2009-12-01

    Full Text Available A major problem challenging specialists in present-day materials sciences is the development of compact, cheap to fabricate heat sinks for electronic devices, primarily for computer processors, semiconductor lasers, high-power microchips, and electronics components. The materials currently used for heat sinks of such devices are aluminum and copper, with thermal conductivities of about 250 W/(m·K and 400 W/(m·K, respectively. Significantly, the thermal expansion coefficient of metals differs markedly from those of the materials employed in semiconductor electronics (mostly silicon; one should add here the low electrical resistivity metals possess. By contrast, natural single-crystal diamond is known to feature the highest thermal conductivity of all the bulk materials studied thus far, as high as 2,200 W/(m·K. Needless to say, it cannot be applied in heat removal technology because of high cost. Recently, SiC- and AlN-based ceramics have started enjoying wide use as heat sink materials; the thermal conductivity of such composites, however, is inferior to that of metals by nearly a factor two. This prompts a challenging scientific problem to develop diamond-based composites with thermal characteristics superior to those of aluminum and copper, adjustable thermal expansion coefficient, low electrical conductivity and a moderate cost, below that of the natural single-crystal diamond. The present review addresses this problem and appraises the results reached by now in studying the possibility of developing composites in diamond-containing systems with a view of obtaining materials with a high thermal conductivity.

  17. Electrical conductivity of water-bearing magmas

    Science.gov (United States)

    Gaillard, F.

    2003-04-01

    Phase diagrams and chemical analyzes of crystals and glass inclusions of erupted lavas tell us that most explosive volcanic eruptions were caused by extremely water-rich pre-eruptive conditions. Volcanologists estimate volcanic hazards by the pre-eruptive water content of lavas erupted in the past and they hypothesize that future eruptions should show similar features. Alternatively, the development of methods allowing direct estimation of water content of magmas stored in the Earth’s interior would have the advantage of providing direct constraints about upcoming rather than past eruptions. Geoelectrical sounding, being the most sensitive probe to the chemical state of the Earth’s interior, seems a promising tool providing that its interpretation is based on relevant laboratory constraints. However, the current database of electrical conductivity of silicate melt merely constrains anhydrous composition. We have therefore undertaken an experimental program aiming at elucidating the effect of water on the electrical conductivity of natural magmas. Measurements (impedance spectroscopy) are performed using a two electrodes set-up in an internally heated pressure vessel. The explored temperature and pressure range is 25-1350°C and 0.1-400MPa. The material used is a natural rhyolitic obsidian. Hydration of this rhyolite is first performed in Pt capsules with 0.5, 1, 2 and 6wt% of water. In a second step, the conductivity measurements are performed at pressure and temperature in a modified Pt capsule. One end of the capsule is arc-welded whereas the other end is closed with the help of a BN cone and cement through which an inner electrode is introduced in the form a Pt wire. The capsule is used as outer electrode. The electrical cell has therefore a radial geometry. The rhyolite is introduced in the cell in the form of a cylinder drilled in the previously hydrated glass. At dwell condition, the melt is sandwiched between two slices of quartz avoiding any deformation

  18. A Qualitative Program Evaluation of a Structured Leadership Mentoring Program at a Large Aerospace Corporation

    Science.gov (United States)

    Teller, Romney P.

    2011-01-01

    The researcher utilized a qualitative approach to conduct a program evaluation of the organization where he is employed. The study intended to serve as a program evaluation for the structured in-house mentoring program at a large aerospace corporation (A-Corp). This program evaluation clarified areas in which the current mentoring program is…

  19. Program specialization

    CERN Document Server

    Marlet, Renaud

    2013-01-01

    This book presents the principles and techniques of program specialization - a general method to make programs faster (and possibly smaller) when some inputs can be known in advance. As an illustration, it describes the architecture of Tempo, an offline program specializer for C that can also specialize code at runtime, and provides figures for concrete applications in various domains. Technical details address issues related to program analysis precision, value reification, incomplete program specialization, strategies to exploit specialized program, incremental specialization, and data speci

  20. Targeted Technology Transfer to US Independents

    Energy Technology Data Exchange (ETDEWEB)

    Schatzinger, Viola [Petroleum Tech. Transfer Council, Tulsa, OK (United States); Chapman, Kathy [Petroleum Tech. Transfer Council, Tulsa, OK (United States); Lovendahl, Kristi [Petroleum Tech. Transfer Council, Tulsa, OK (United States)

    2014-09-30

    -year contract with the Department of Energy (DOE) for providing technology transfer services. This report summarizes activity and results during for five years, FY10 through FY14. In FY12 changes occurred in responsibilities of consultants serving HQ, because funding was reduced below the threshold level of $500,000 audits were no longer required and consultant time was reduced on the primary contract. Contracts for Permian Carbon Capture Utilization and Storage (CCUS) training, and providing tech transfer services to the Research Partnership to Secure Energy for America (RPSEA) provided work that enabled HQ to retain services of regular consultants. Both CCUS and RPSEA were five year contracts with PTTC, and providing services for these DOE funded contracts provided synergy for PTTC and the oil and gas industry. With further decreases in DOE funding the regions conducted workshops with no PTTC funding starting in June FY11. Since 2011 the number of workshops has declined from 79 in FY10 and FY11 to 49 in FY12, and risen to 54 in FY13 and 63 in FY14. The attendee's numbers dipped slightly below 3,000 per year in FY 10, FY12, and FY13, but rose to over 3,800 in FY 11 and 3105 in FY14. Quantitative accomplishments: PTTC has maintained its unique structure of a national organization working through Regional Lead Organizations (RLOs) to deliver local, affordable workshops. During the contract period PTTC consolidated from 10 to five regions to increase efficiency, and because no active RLO's would be maintained in the Central and Eastern Gulf Coast regions. RLO's for the regions are located at: Eastern - West Virginia University, (Illinois Geol. Survey., W. Michigan Univ. FY10-12); Midwest created in FY13 - Illinois Geological Survey, W. Michigan University; Midcontinent - University of Kansas, expanded to Houston, TX (2013-14); Rocky Mountain - Colorado School of Mines; Texas/SE New Mexico (FY10-FY11) - Bureau of Economic Geology, Univ. of Texas at Austin; West

  1. Dielectric properties of conductive ionomers

    Science.gov (United States)

    Klein, Robert James

    Ion and polymer dynamics of ion-containing polymers were investigated, with the majority of results obtained from application of a physical model of electrode polarization (EP) to dielectric spectroscopy data. The physical model of MacDonald, further developed by Coelho, was extended for application to tan delta (the ratio of dielectric loss to dielectric constant) as a function of frequency. The validity of this approach was confirmed by plotting the characteristic EP time as a function of thickness and comparing the actual and predicted unrelaxed dielectric constant for a poly(ethylene oxide) (PEO)-based ionomer neutralized by lithium, sodium, and cesium. Results were obtained for ion mobility and mobile ion concentration for a neat PEO-based ionomer, two (methoxyethoxy-ethoxy phosphazene) (MEEP) -based ionomers, two MEEP-based salt-doped polymers, sulfonated polystyrene (SPS) neutralized by sodium with a high sulfonation fraction, and SPS neutralized by zinc with a low sulfonation fraction. Additionally, the conductivity parameters of six plasticized forms of a neat PEO-based ionomer were characterized, but the method apparently failed to correctly evaluate bulk ionic behavior. In all cases except the SPS ionomers ion mobility follows a Vogel-Fulcher-Tammann (VFT) temperature dependence. In all cases, mobile ion concentration follows an Arrhenius temperature dependence. Fitting parameters from these two relationships yielded direct information about the state of ionic diffusion and ion pairing in each system. Combination of these two functionalities predicts a relationship for conductivity that is significantly different than the VFT relation typically used in the literature to fit conductivity. The most outstanding result was the extremely small fraction of ions found to be mobile. For ionomers it can be concluded that the primary reason for low conductivities arises from the low fraction of mobile ions. The local and segmental dynamics of the neat and

  2. Learners Programming Language a Helping System for Introductory Programming Courses

    Directory of Open Access Journals (Sweden)

    MUHAMMAD SHUMAIL NAVEED

    2016-07-01

    Full Text Available Programming is the core of computer science and due to this momentousness a special care is taken in designing the curriculum of programming courses. A substantial work has been conducted on the definition of programming courses, yet the introductory programming courses are still facing high attrition, low retention and lack of motivation. This paper introduced a tiny pre-programming language called LPL (Learners Programming Language as a ZPL (Zeroth Programming Language to illuminate novice students about elementary concepts of introductory programming before introducing the first imperative programming course. The overall objective and design philosophy of LPL is based on a hypothesis that the soft introduction of a simple and paradigm specific textual programming can increase the motivation level of novice students and reduce the congenital complexities and hardness of the first programming course and eventually improve the retention rate and may be fruitful in reducing the dropout/failure level. LPL also generates the equivalent high level programs from user source program and eventually very fruitful in understanding the syntax of introductory programming languages. To overcome the inherent complexities of unusual and rigid syntax of introductory programming languages, the LPL provide elementary programming concepts in the form of algorithmic and plain natural language based computational statements. The initial results obtained after the introduction of LPL are very encouraging in motivating novice students and improving the retention rate.

  3. Improving the firm's environmental conduct

    DEFF Research Database (Denmark)

    Knudsen, Thorbjørn; Koed Madsen, Tage

    2001-01-01

    lead to strategic advantage and, thus, economic gains at the firm level. In view of the great importance of this claim, the purpose of the present article was to apply resource-based insights in order to develop this reasoning further and provide an empirical test of three hypotheses related...... to the claim. Our empirical test filled a gap in previous research and offered evidence in support of this claim as well as support for two related hypotheses developed on the basis of the resource-based view.......  It has recently been argued that growing societal pressures for better environmental conduct could induce environmental innovation, thereby entailing lower costs due to increased value and/or more efficient resource allocation. This has led to the claim that improved environmental conduct may...

  4. Conducting Miller-Urey Experiments

    Science.gov (United States)

    Parker, Eric Thomas; Cleaves, Henderson James; Burton, Aaron S.; Glavin, Daniel P.; Dworkin, Jason; Zhou, Manshui; Bada, Jeffrey L.; Fernandez, Facundo M.

    2014-01-01

    In 1953, Stanley Miller reported the production of biomolecules from simple gaseous starting materials, using apparatus constructed to simulate the primordial Earth's atmosphere-ocean system. Miller introduced 200 ml of water, 100 mmHg of H2, 200mmHg of CH4, and 200mmHg of NH3 into the apparatus, then subjected this mixture, under reflux, to an electric discharge for a week, while the water was simultaneously heated. The purpose of this manuscript is to provide the reader with a general experimental protocol that can be used to conduct a Miller-Urey type spark discharge experiment, using a simplified 3 L reaction flask. Since the experiment involves exposing inflammable gases to a high voltage discharge, it is worth highlighting important steps that reduce the risk of explosion. The general procedures described in this work can be extrapolated to design and conduct a wide variety of electric discharge experiments simulating primitive planetary environments.

  5. Inductive heating of conductive nanoparticles

    CERN Document Server

    Nordebo, Sven

    2016-01-01

    We consider the heating of biological tissue by injecting gold nanoparticles and subjecting the system to an electromagnetic field in the radio frequency spectrum. There are results that indicate that small conducting particles can substantially increase the heating locally and thus provide a method to treat cancer. However, recently there are also other publications that question whether metal nanoparticles can be heated in radiofrequency at all. This paper presents a simplified analysis and some interesting observations regarding the classical electromagnetic background to this effect. Here, it is assumed that the related dipole effects are based solely on conducting nanospheres that are embedded in a surrounding medium. From this point of view it is concluded that the effect of using a capactive coupling i.e., a strong electric field to induce electric dipoles can be disregarded unless the volume fraction of the gold nanoparticles is unrealistically high or if there are some other external electric dipole ...

  6. Conduct of operations implementation plan

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, C.K.; Hall, R.L.

    1991-02-20

    This implementation plan describes the process and provides information and schedules that are necessary to implement and comply with the Department of Energy (DOE) Order 5480.19, {open_quotes}Conduct of Operations{close_quotes} (CoOp). This plan applies to all Pinellas Plant operations and personnel. Generally, this Plan discusses how DOE Order 5480.19 will be implemented at the Pinellas Plant.

  7. Anomalous electronic conductance in quasicrystals

    Science.gov (United States)

    Roche, Stephan; Moulopoulos, Konstantinos

    2000-03-01

    Subtle quantum interference effects in one-dimensional quasicrystals are reported. Quite opposite to their metallic counterparts, quasiperiodic systems are shown to exhibit interesting variations of their conducting properties upon disruption of their long-range order. A sudden phason change in the structure leads to a series of transitions that proceed from extremely simple and regular to highly complex self-similar resistive patterns.

  8. Conducting Service Research that Matters

    OpenAIRE

    Gustafsson, Anders; Aksoy, Lerzan; Brady, Michael; McColl-Kennedy, Janet; Sirianni, Nancy; Witell, Lars; Wünderlich, Nancy V.

    2015-01-01

    Purpose –The purpose of this essay is to encourage the reader to think differently about service related issues, and to strive to conduct service research that makes a transformational impact on individuals, organizations, and society. The authors suggest that service researchers are in an excellent position to develop research that matters by making stronger connections with theory, and elevating purely applied research to research that is higher in both practical relevance and methodolo...

  9. Nerve conduction and electromyography studies.

    Science.gov (United States)

    Kane, N M; Oware, A

    2012-07-01

    Nerve conduction studies (NCS) and electromyography (EMG), often shortened to 'EMGs', are a useful adjunct to clinical examination of the peripheral nervous system and striated skeletal muscle. NCS provide an efficient and rapid method of quantifying nerve conduction velocity (CV) and the amplitude of both sensory nerve action potentials (SNAPs) and compound motor action potentials (cMAPs). The CV reflects speed of propagation of action potentials, by saltatory conduction, along large myelinated axons in a peripheral nerve. The amplitude of SNAPs is in part determined by the number of axons in a sensory nerve, whilst amplitude of cMAPs reflects integrated function of the motor axons, neuromuscular junction and striated muscle. Repetitive nerve stimulation (RNS) can identify defects of neuromuscular junction (NMJ) transmission, pre- or post-synaptic. Needle EMG examination can detect myopathic changes in muscle and signs of denervation. Combinations of these procedures can establish if motor and/or sensory nerve cell bodies or peripheral nerves are damaged (e.g. motor neuronopathy, sensory ganglionopathy or neuropathy), and also indicate if the primary target is the axon or the myelin sheath (i.e. axonal or demyelinating neuropathies). The distribution of nerve damage can be determined as either generalised, multifocal (mononeuropathy multiplex) or focal. The latter often due to compression at the common entrapment sites (such as the carpal tunnel, Guyon's canal, cubital tunnel, radial groove, fibular head and tarsal tunnel, to name but a few of the reported hundred or so 'entrapment neuropathies').

  10. Proton-conducting cerate ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Pederson, L.R.; Coffey, G.W.; Bates, J.L.; Weber, W.J. [Pacific Northwest National Lab., Richland, WA (United States)

    1996-08-01

    Single-cell solid oxide fuel cells were constructed using strontium cerate as the electrolyte and their performance tested. Like certain zirconates, hafnates, and tantalates, the cerate perovskites are among a class of solid electrolytes that conduct protons at elevated temperatures. Depending on the temperature and chemical environment, these ceramics also support electronic and oxygen ion currents. A maximum power output of {approx}100 mW per cm{sup 2} electrolyte surface area was obtained at 900{degrees}C using 4% hydrogen as the fuel and air as the oxidant. A series of rare earth/ceria/zirconia were prepared and their electrical properties characterized. Rare earth dopants included ytterbia, yttria, terbia, and europia. Ionic conductivities were highest for rare earth/ceria and rare earth zirconia compositions; a minimum in ionic conductivity for all series were found for equimolar mixtures of ceria and zirconia. Cerium oxysulfide is of interest in fossil energy applications because of its high chemical stability and refractory nature. An alternative synthesis route to preparing cerium oxysulfide powders has been developed using combustion techniques.

  11. Heat conduction within linear thermoelasticity

    CERN Document Server

    Day, William Alan

    1985-01-01

    J-B. J. FOURIER'S immensely influential treatise Theorie Analytique de la Chaleur [21J, and the subsequent developments and refinements of FOURIER's ideas and methods at the hands of many authors, provide a highly successful theory of heat conduction. According to that theory, the growth or decay of the temperature e in a conducting body is governed by the heat equation, that is, by the parabolic partial differential equation Such has been the influence of FOURIER'S theory, which must forever remain the classical theory in that it sets the standard against which all other theories are to be measured, that the mathematical investigation of heat conduction has come to be regarded as being almost identicalt with the study of the heat equation, and the reader will not need to be reminded that intensive analytical study has t But not entirely; witness, for example, those theories which would replace the heat equation by an equation which implies a finite speed of propagation for the temperature. The reader is refe...

  12. Thermal Conductivity of Humid Air

    Science.gov (United States)

    Beirão, S. G. S.; Ribeiro, A. P. C.; Lourenço, M. J. V.; Santos, F. J. V.; Nieto de Castro, C. A.

    2012-09-01

    In this article, measurements of the thermal conductivity of humid air as a function of pressure, temperature, and mole fraction of water, for pressures up to 5 MPa and temperatures up to 430 K, for different water contents (up to 10 % vapor mole fraction) are reported. Measurements were performed using a transient hot-wire apparatus capable of obtaining data with an uncertainty of 0.8 % for gases. However, as moist air becomes corrosive above 373 K and at pressures >5 MPa, the apparatus, namely, the pressure vessel and the cells had to be modified, by coating all stainless-steel parts with a titanium nitride thin film coating, about 4 μm thick, obtained by physical vapor deposition. The expanded uncertainty (coverage factor k = 2) of the present experimental thermal conductivity data is 1.7 %, while the uncertainty in the mole fraction is estimated to be better than 0.0006. Experimental details regarding the preparation of the samples, the precautions taken to avoid condensation in the tubes connected to the measuring cell, and the method developed for obtaining reliable values of the water content for the gas mixtures are discussed. A preliminary analysis of the application of the kinetic theory of transport properties in reacting mixtures to interpret the complex dependence of the thermal conductivity of humid air on water composition is addressed.

  13. Thermal Conductivity Of Rubble Piles

    CERN Document Server

    Luan, Jing

    2015-01-01

    Rubble piles are a common feature of solar system bodies. They are composed of monolithic elements of ice or rock bound by gravity. Voids occupy a significant fraction of the volume of a rubble pile. They can exist up to pressure $P\\approx \\epsy\\mu$, where $\\epsy$ is the monolithic material's yield strain and $\\mu$ its rigidity. At low $P$, contacts between neighboring elements are confined to a small fraction of their surface areas. As a result, the effective thermal conductivity of a rubble pile, $\\kcon\\approx k(P/(\\epsy\\mu))^{1/2}$, can be orders of magnitude smaller than, $k$, the thermal conductivity of its monolithic elements. In a fluid-free environment, only radiation can transfer energy across voids. It contributes an additional component, $\\krad=16\\ell\\sigma T^3/3$, to the total effective conductivity, $\\keff=\\kcon +\\krad$. Here $\\ell$, the inverse of the opacity per unit volume, is of order the size of the elements and voids. An important distinction between $\\kcon$ and $\\krad$ is that the former i...

  14. Nonlinear conductivity in silicon nitride

    Science.gov (United States)

    Tuncer, Enis

    2017-08-01

    To better comprehend electrical silicon-package interaction in high voltage applications requires full characterization of the electrical properties of dielectric materials employed in wafer and package level design. Not only the packaging but wafer level dielectrics, i.e. passivation layers, would experience high electric fields generated by the voltage applied pads. In addition the interface between the passivation layer and a mold compound might develop space charge because of the mismatch in electrical properties of the materials. In this contribution electrical properties of a thin silicon nitride (Si3N4) dielectric is reported as a function of temperature and electric field. The measured values later analyzed using different temperature dependent exponential expressions and found that the Mott variable range hopping conduction model was successful to express the data. A full temperature/electric field dependency of conductivity is generated. It was found that the conduction in Si3N4 could be expressed like a field ionization or Fowler-Nordheim mechanism.

  15. Sustained Effects of Incredible Years as a Preventive Intervention in Preschool Children with Conduct Problems

    Science.gov (United States)

    Posthumus, Jocelyne A.; Raaijmakers, Maartje A. J.; Maassen, Gerard H.; van Engeland, Herman; Matthys, Walter

    2012-01-01

    The present study evaluated preventive effects of the Incredible Years program for parents of preschool children who were at risk for a chronic pattern of conduct problems, in the Netherlands. In a matched control design, 72 parents of children with conduct problems received the Incredible Years program. These families (intervention group) were…

  16. CONDUCTIVE CHANNEL FOR ENERGY TRANSMISSION

    Directory of Open Access Journals (Sweden)

    V. V. Apollonov

    2014-01-01

    Full Text Available Laser spark obtained by using a conical optics is much more appropriate to form conducting channels in atmosphere. Only two types of lasers are actively considered to be used in forming high-conductivity channels in atmosphere, controlled by laser spark: pulsed sub-microsecond gas and chemical lasers (CO2, DF and short pulse solid-state and UV lasers. Main advantage of short pulse lasers is their ability in forming of super long ionized channels with a characteristic diameter of ~100  µ  in atmosphere along the  beam propagation direction. At estimated electron densities below  10 ⋅ 16 cm–3 in these filaments and laser wavelengths in the range of 0,5–1,0 mm, the plasma barely absorbs laser radiation.  In this case, the length of the track composed of many filaments is determined by the laser intensity and may reach many kilometers at a femtosecond pulse energy of ~100 mJ. However, these lasers could not be used to form high-conductivity long channels in atmosphere. The ohmic resistance of this type a conducting channels turned out to be very high, and the gas in the channels could not be strongly heated (< 1 J. An electric breakdown controlled by radiation of femtosecond solid-state laser was implemented in only at a length of 3 m with a voltage of 2 MV across the discharge gap (670 kV/m.Not so long ago scientific group from P. N. Lebedev has improved that result, the discharge gap – 1 m had been broken under KrF laser irradiation when switching high-voltage (up to 390 kV/m electric discharge by 100-ns UV pulses. Our previous result  –  16 m long conducting channel controlled by a  laser spark at the voltage  –  3 MV  – was obtained more than 20 years ago in Russia and Japan by using pulsed CO2  laser with energy  –  0,5 kJ. An average electric field strength  was < 190 kV/m. It is still too much for efficient applications.

  17. Performance assurance program plan

    Energy Technology Data Exchange (ETDEWEB)

    Rogers, B.H.

    1997-11-06

    B and W Protec, Inc. (BWP) is responsible for implementing the Performance Assurance Program for the Project Hanford Management Contract (PHMC) in accordance with DOE Order 470.1, Safeguards and Security Program (DOE 1995a). The Performance Assurance Program applies to safeguards and security (SAS) systems and their essential components (equipment, hardware, administrative procedures, Protective Force personnel, and other personnel) in direct support of Category I and H special nuclear material (SNM) protection. Performance assurance includes several Hanford Site activities that conduct performance, acceptance, operability, effectiveness, and validation tests. These activities encompass areas of training, exercises, quality assurance, conduct of operations, total quality management, self assessment, classified matter protection and control, emergency preparedness, and corrective actions tracking and trending. The objective of the Performance Assurance Program is to capture the critical data of the tests, training, etc., in a cost-effective, manageable program that reflects the overall effectiveness of the program while minimizing operational impacts. To aid in achieving this objective, BWP will coordinate the Performance Assurance Program for Fluor Daniel Hanford, Inc. (FDH) and serve as the central point for data collection.

  18. Standards of Scientific Conduct: Disciplinary Differences.

    Science.gov (United States)

    Kalichman, Michael; Sweet, Monica; Plemmons, Dena

    2015-10-01

    Teaching of responsible conduct of research is largely predicated on the assumption that there are accepted standards of conduct that can be taught. However there is little evidence of consensus in the scientific community about such standards, at least for the practices of authorship, collaboration, and data management. To assess whether such differences in standards are based on disciplinary differences, a survey, described previously, addressing standards, practices, and perceptions about teaching and learning was distributed in November 2010 to US faculty from 50 graduate programs for the biomedical disciplines of microbiology, neuroscience, nursing, and psychology. Despite evidence of statistically significant differences across the four disciplines, actual differences were quite small. Stricter measures of effect size indicated practically significant disciplinary differences for fewer than 10% of the questions. This suggests that the variation in individual standards of practice within each discipline is at least as great as variation due to differences among disciplines. Therefore, the need for discipline-specific training may not be as important as sometimes thought.

  19. Conduct, Biological Factors and Adult Delinquency in a Longitudinal Perspective.

    Science.gov (United States)

    Magnusson, David

    In the course of a longitudinal research program conducted in Sweden, data were being collected on biological and psychological aspects of individual functioning and on environmental factors for a fairly large representative sample (approximately 1,000) of Swedish males and females between 10 and 27 years of age. Based on data from the…

  20. Electrical Conductivity of milk: ability to predict mastitis status

    NARCIS (Netherlands)

    Norberg, E.; Hogeveen, H.; Korsgaard, I.R.; Friggens, N.C.; Sloth, K.H.M.N.; Lovendahl, P.

    2004-01-01

    Electrical conductivity (EC) of milk has been introduced as an indicator trait for mastitis over the last decade, and it may be considered as a potential trait in a breeding program where selection for improved udder health is included. In this study, various EC traits were investigated for their as

  1. A Bilingual Education Program for Micronesia

    Science.gov (United States)

    Topping, Donald M.

    1975-01-01

    The University of Hawaii is conducting a bilingual education program for Micronesia to confront the problems of a multilingual, multicultural society. The program has produced dictionaries and grammars and has enrolled Micronesian students in education training courses. (CK)

  2. 28 CFR 524.23 - Program reviews.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Program reviews. 524.23 Section 524.23... TRANSFER CLASSIFICATION OF INMATES Youth Corrections Act (YCA) Programs § 524.23 Program reviews. Staff shall conduct periodic reviews of the inmate's program plan and shall modify the plan in accordance with...

  3. Sandia Laboratories energy programs

    Energy Technology Data Exchange (ETDEWEB)

    Lundergan, C.D.; Mead, P.L.; Gillespie, R.S. (eds.)

    1977-03-01

    As one of the multiprogram laboratories of the Energy Research and Development Administration, Sandia Laboratories applies its resources to a number of nationally important programs. About 75 percent of these resources are applied to research and development for national security programs having to do primarily with nuclear weapons--the principal responsibility of the Laboratories. The remaining 25 percent are applied to energy programs and energy-related activities, particularly those requiring resources that are also used in nuclear weapon and other national security programs. Examples of such energy programs and activities are research into nuclear fusion, protection of nuclear materials from theft or diversion, and the disposal of radioactive waste. A number of technologies and disciplines developed for the weapon program are immediately applicable for the development of various energy sources. Instruments developed to detect, measure, and record the detonation of nuclear devices underground, now being used to support the development of in-situ processing of coal and oil shale, are examples. The purpose of this report is to provide an overview of these and other energy programs being conducted by these laboratories in the development of economical and environmentally acceptable alternative energy sources. Energy programs are undertaken when they require capabilities used at the Laboratories for the weapon program, and when they have no adverse effect upon that primary mission. The parallel operation of weapon and energy activities allows optimum use of facilities and other resources.

  4. Unified Hamiltonian for conducting polymers

    Science.gov (United States)

    Leitão Botelho, André; Shin, Yongwoo; Li, Minghai; Jiang, Lili; Lin, Xi

    2011-11-01

    Two transferable physical parameters are incorporated into the Su-Schrieffer-Heeger Hamiltonian to model conducting polymers beyond polyacetylene: the parameter γ scales the electron-phonon coupling strength in aromatic rings and the other parameter ɛ specifies the heterogeneous core charges. This generic Hamiltonian predicts the fundamental band gaps of polythiophene, polypyrrole, polyfuran, poly-(p-phenylene), poly-(p-phenylene vinylene), and polyacenes, and their oligomers of all lengths, with an accuracy exceeding time-dependent density functional theory. Its computational costs for moderate-length polymer chains are more than eight orders of magnitude lower than first-principles approaches.

  5. On Vasyliunas's equivalent conductivity formalism

    Science.gov (United States)

    Pontius, D. H., Jr.

    1992-01-01

    The Vasyliunas's (1972) equivalent conductivity formalism (ECF) for representing the coupling of the ionosphere and the magnetosphere is discussed, and a new, simpler, derivation is presented of the ECF, in which certain of the underlying assumptions and their implications are made transparent. The derivation presented indicates that the only role of the ions in the ECF is to insure quasi-neutrality. It is shown that the ECF is not as robust as usually assumed and that caution must be used to insure that reasonable results are obtained.

  6. Employer's Perceptions of Agribusiness Placement SOE Programs.

    Science.gov (United States)

    Fletcher, Gregory W.; And Others

    1985-01-01

    Research was conducted to determine the benefits derived from agribusiness supervised occupational experience programs and to identify factors important in planning and/or conducting students' agribusiness employment experiences as perceived by employers of vocational agriculture students. (CT)

  7. The State of Water in Proton Conducting Membranes

    Energy Technology Data Exchange (ETDEWEB)

    Allcock, Harry R.; Benesi, Alan; Macdonald, Digby D.

    2010-08-27

    The research carried out under grant No. DE-FG02-07ER46371, "The State of Water in Proton Conducting Membranes", during the period June 1, 2008 - May 31, 2010 was comprised of three related parts. These are: 1. An examination of the state of water in classical proton conduction membranes with the use of deuterium T1 NMR spectroscopy (Allcock and Benesi groups). 2. A dielectric relaxation examination of the behavior of water in classical ionomer membranes (Macdonald program). 3. Attempts to synthesize new proton-conduction polymers and membranes derived from the polyphosphazene system. (Allcock program) All three are closely related, crucial aspects of the design and development of new and improved polymer electrolyte fuel cell membranes on which the future of fuel cell technology for portable applications depends.

  8. Dynamical conductivity of confined water

    Science.gov (United States)

    Artemov, V. G.

    2017-01-01

    The electrodynamic response of water confined in nanoporous MCM-41 is measured in the frequency range 1 MHz-3 THz at room temperature. The results are analyzed in the context of a recently proposed ionic model of water. We found an increase in dc-conductivity of confined water by 3 orders of magnitude (3.3 · 10-3 Ω-1 · m-1) compared to bulk water (5.5 · 10-6 Ω-1 · m-1). This is attributed to the increase of H3O+ and OH- ion mobility, due to a decrease of the effective potential amplitude by walls of the confining environment. We found that the absorption in the microwave frequency range is much smaller in the medium with confined water than in the bulk water, and the quadratic dependence of the conductivity (σ) on frequency (ω) becomes less steep and tends to σ ~ ω. The results are of fundamental importance and can be used for understanding of the proton transport in systems with water in the nanoconfined state.

  9. Transparent conducting silver nanowire networks

    CERN Document Server

    van de Groep, Jorik; Polman, Albert; 10.1021/nl301045a

    2013-01-01

    We present a transparent conducting electrode composed of a periodic two-dimensional network of silver nanowires. Networks of Ag nanowires are made with wire diameters of 45-110 nm and pitch of 500, 700 and 1000 nm. Anomalous optical transmission is observed, with an averaged transmission up to 91% for the best transmitting network and sheet resistances as low as 6.5 {\\Omega}/sq for the best conducting network. Our most dilute networks show lower sheet resistance and higher optical transmittance than an 80 nm thick layer of ITO sputtered on glass. By comparing measurements and simulations we identify four distinct physical phenomena that govern the transmission of light through the networks: all related to the excitation of localized surface plasmons and surface plasmon polaritons on the wires. The insights given in this paper provide the key guidelines for designing high-transmittance and low-resistance nanowire electrodes for optoelectronic devices, including thin-film solar cells. For these latter, we disc...

  10. Infrared Hall Conductivity in Graphene

    Science.gov (United States)

    Ellis, C. T.; Kim, M.-H.; Wu, T.; Sambandamurthy, G.; Cerne, J.; Lee, V.; Banerjee, S.

    2009-03-01

    Among the many different techniques which have revealed graphene's remarkable properties, infrared conductivity (σxx) (Jiang, PRL 2007) and the DC Hall effect (Novoselov, Nature 2005; Zhang, Nature 2005; Zhang, PRL 2006) have provided new insights into this material. In our study we determine the infrared Hall conductivity (σxy) for graphene in the 120-1000 meV range at temperatures down to 7K and magnetic fields up to 7T using Faraday measurements. Unlike σxx, which measures the sum of the optical responses for left and right circularly polarized light, σxy measures the difference and therefore is sensitive to small changes in symmetry. We compare graphene samples that are prepared using several methods, including cleaving from parent materials such as highly ordered pyrolytic graphite, as well as sonication-assisted solution-phase exfoliation of natural flake graphite powder. The films are then deposited onto Si/SiO2 substrates for infrared measurements. This work is supported by the NSF-CAREER-DMR0449899, also GS and SB thank the UB-IRDF for financial support.

  11. Radiative magnetized thermal conduction fronts

    Science.gov (United States)

    Borkowski, Kazimierz J.; Balbus, Steven A.; Fristrom, Carl C.

    1990-01-01

    The evolution of plane-parallel magnetized thermal conduction fronts in the interstellar medium (ISM) was studied. Separating the coronal ISM phase and interstellar clouds, these fronts have been thought to be the site of the intermediate-temperature regions whose presence was inferred from O VI absorption-line studies. The front evolution was followed numerically, starting from the initial discontinuous temperature distribution between the hot and cold medium, and ending in the final cooling stage of the hot medium. It was found that, for the typical ISM pressure of 4000 K/cu cm and the hot medium temperature of 10 to the 6th K, the transition from evaporation to condensation in a nonmagnetized front occurs when the front thickness is 15 pc. This thickness is a factor of 5 smaller than previously estimated. The O VI column densities in both evaporative and condensation stages agree with observations if the initial hot medium temperature Th exceeds 750,000 K. Condensing conduction fronts give better agreement with observed O VI line profiles because of lower gas temperatures.

  12. Conduction-coupled Tesla transformer.

    Science.gov (United States)

    Reed, J L

    2015-03-01

    A proof-of-principle Tesla transformer circuit is introduced. The new transformer exhibits the high voltage-high power output signal of shock-excited transformers. The circuit, with specification of proper circuit element values, is capable of obtaining extreme oscillatory voltages. The primary and secondary portions of the circuit communicate solely by conduction. The destructive arcing between the primary and secondary inductors in electromagnetically coupled transformers is ubiquitous. Flashover is eliminated in the new transformer as the high-voltage inductors do not interpenetrate and so do not possess an annular volume of electric field. The inductors are remote from one another. The high voltage secondary inductor is isolated in space, except for a base feed conductor, and obtains earth by its self-capacitance to the surroundings. Governing equations, for the ideal case of no damping, are developed from first principles. Experimental, theoretical, and circuit simulator data are presented for the new transformer. Commercial high-temperature superconductors are discussed as a means to eliminate the counter-intuitive damping due to small primary inductances in both the electromagnetic-coupled and new conduction-coupled transformers.

  13. Program summaries for 1979: energy sciences programs

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    This report describes the objectives of the various research programs being conducted by the Chemical Sciences, Metallurgy and Materials Science, and Process Science divisions of the BNL Dept. of Energy and Environment. Some of the more significant accomplishments during 1979 are also reported along with plans for 1980. Some of the topics under study include porphyrins, combustion, coal utilization, superconductors, semiconductors, coal, conversion, fluidized-bed combustion, polymers, etc. (DLC)

  14. ISS Robotic Student Programming

    Science.gov (United States)

    Barlow, J.; Benavides, J.; Hanson, R.; Cortez, J.; Le Vasseur, D.; Soloway, D.; Oyadomari, K.

    2016-01-01

    The SPHERES facility is a set of three free-flying satellites launched in 2006. In addition to scientists and engineering, middle- and high-school students program the SPHERES during the annual Zero Robotics programming competition. Zero Robotics conducts virtual competitions via simulator and on SPHERES aboard the ISS, with students doing the programming. A web interface allows teams to submit code, receive results, collaborate, and compete in simulator-based initial rounds and semi-final rounds. The final round of each competition is conducted with SPHERES aboard the ISS. At the end of 2017 a new robotic platform called Astrobee will launch, providing new game elements and new ground support for even more student interaction.

  15. SERI Wind Energy Program

    Energy Technology Data Exchange (ETDEWEB)

    Noun, R. J.

    1983-06-01

    The SERI Wind Energy Program manages the areas or innovative research, wind systems analysis, and environmental compatibility for the U.S. Department of Energy. Since 1978, SERI wind program staff have conducted in-house aerodynamic and engineering analyses of novel concepts for wind energy conversion and have managed over 20 subcontracts to determine technical feasibility; the most promising of these concepts is the passive blade cyclic pitch control project. In the area of systems analysis, the SERI program has analyzed the impact of intermittent generation on the reliability of electric utility systems using standard utility planning models. SERI has also conducted methodology assessments. Environmental issues related to television interference and acoustic noise from large wind turbines have been addressed. SERI has identified the causes, effects, and potential control of acoustic noise emissions from large wind turbines.

  16. Aqueous supercapacitors on conductive cotton

    KAUST Repository

    Pasta, Mauro

    2010-06-01

    Wearable electronics offer the combined advantages of both electronics and fabrics. In this article, we report the fabrication of wearable supercapacitors using cotton fabric as an essential component. Carbon nanotubes are conformally coated onto the cotton fibers, leading to a highly electrically conductive interconnecting network. The porous carbon nanotube coating functions as both active material and current collector in the supercapacitor. Aqueous lithium sulfate is used as the electrolyte in the devices, because it presents no safety concerns for human use. The supercapacitor shows high specific capacitance (~70-80 F·g-1 at 0.1 A·g-1) and cycling stability (negligible decay after 35,000 cycles). The extremely simple design and fabrication process make it applicable for providing power in practical electronic devices. © 2010 Tsinghua University Press and Springer-Verlag Berlin Heidelberg.

  17. Guidelines for conducting geropsychotherapy research.

    Science.gov (United States)

    Areán, Patricia A; Cook, Beth L; Gallagher-Thompson, Dolores; Hegel, Mark T; Schulberg, Herbert C; Schulz, Richard

    2003-01-01

    Geropsychotherapy researchers have established specific methods that improve the reliability and generalizability of the data from this research. To date, there has been little formal dissemination of these methods. The authors present guidelines for the optimal conduct of psychotherapy research in older adults, which include selection of age-appropriate psychotherapies and control conditions, use of consumer-based methods for recruitment, evaluation of age-related treatment processes and outcomes, and adjusting the research design to accommodate age-specific life events and provide examples of how each guideline was used in their psychotherapy studies. Psychotherapy research with older adults has benefited from methodological advances that improve our ability to ascertain the impact of psychotherapy on late-life disorders. However, the field is still in need of better outcome and process measures, methods for measuring the therapeutic content of non-psychotherapy encounters, and methods for determining the impact of choice of treatment on outcome.

  18. Thermal Conductance of Andreev Interferometers

    Science.gov (United States)

    Jiang, Z.; Chandrasekhar, V.

    2005-04-01

    We calculate the thermal conductance GT of diffusive Andreev interferometers, which are hybrid loops with one superconducting arm and one normal-metal arm. The presence of the superconductor suppresses GT; however, unlike a conventional superconductor, GT/GTN does not vanish as the temperature T→0, but saturates at a finite value that depends on the resistance of the normal-superconducting interfaces, and their distance from the path of the temperature gradient. The reduction of GT is determined primarily by the suppression of the density of states in the proximity-coupled normal metal along the path of the temperature gradient. GT is also a strongly nonlinear function of the thermal current, as found in recent experiments.

  19. 22 CFR 139.4 - Responsibilities of the Program Administrator.

    Science.gov (United States)

    2010-04-01

    ... program regulations, including rules of the Program Administrator and the code of code of conduct; or the... program. (h) Developing and maintaining a computerized database and website to underpin all of...

  20. Thermal conductivity of molten metals

    Energy Technology Data Exchange (ETDEWEB)

    Peralta-Martinez, Maria Vita

    2000-02-01

    A new instrument for the measurement of the thermal conductivity of molten metals has been designed, built and commissioned. The apparatus is based on the transient hot-wire technique and it is intended for operation over a wide range of temperatures, from ambient up to 1200 K, with an accuracy approaching 2%. In its present form the instrument operates up to 750 K. The construction of the apparatus involved four different stages, first, the design and construction of the sensor and second, the construction of an electronic system for the measurement and storage of data. The third stage was the design and instrumentation of the high temperature furnace for the melting and temperature control of the sample, and finally, an algorithm was developed for the extraction of the thermal conductivity from the raw measurement data. The sensor consists of a cylindrical platinum-wire symmetrically sandwiched between two rectangular plane sheets of alumina. The rectangular sensor is immersed in the molten metal of interest and a voltage step is applied to the ends of the platinum wire to induce heat dissipation and a consequent temperature rise which, is in part, determined by the thermal conductivity of the molten metal. The process is described by a set of partial differential equations and appropriate boundary conditions rather than an approximate analytical solution. An electronic bridge configuration was designed and constructed to perform the measurement of the resistance change of the platinum wire in the time range 20 {mu}s to 1 s. The resistance change is converted to temperature change by a suitable calibration. From these temperature measurements as a function of time the thermal conductivity of the molten metals has been deduced using the Finite Element Method for the solution of the working equations. This work has achieved its objective of improving the accuracy of the measurement of the thermal conductivity of molten metals from {+-}20% to {+-}2%. Measurements

  1. 32 CFR 234.7 - Disorderly conduct.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 2 2010-07-01 2010-07-01 false Disorderly conduct. 234.7 Section 234.7 National... CONDUCT ON THE PENTAGON RESERVATION § 234.7 Disorderly conduct. A person commits disorderly conduct when... nature and purpose of the actor's conduct, location, time of day or night, and other factors that would...

  2. Persistence of elementary programming skills

    DEFF Research Database (Denmark)

    Bennedsen, Jens Benned; Caspersen, Michael E.

    2012-01-01

    Programming is recognised as one of seven grand challenges in computing education and attracts much attention in computing education research. Most research in the area concerns teaching methods, educational technology and student understanding/misconceptions. Typically, evaluation of learning...... outcome takes place during or immediately following the educational activity. In this research, we conduct a qualitative investigation of sustainability of programming competence by studying the effect of recalling programming competence long time after the educational activity has taken place. Our...

  3. ORR Deer Hunt Monitoring Program

    Energy Technology Data Exchange (ETDEWEB)

    Scofield, P.A.; Teasley, N.A.

    1999-09-01

    The primary purpose for the initiation of deer hunts on the Oak Ridge Reservation (ORR) was deer population control to reduce collisions with vehicles and maintain a healthy herd and habitat. As of 1997, thirteen annual deer hunts have been conducted on the ORR. The deer hunt monitoring program (DHMP) has two components -- a field screening monitoring program and a confirmatory laboratory analysis program of both retained and randomly selected released deer samples.

  4. Dipole Engineering for Conducting Polymers

    Science.gov (United States)

    McClain, William Edward

    A method for the growth of a TiO2 adhesion layer on PEDOT:PSS (poly[3,4- ethylenedioxythiophene]: poly[styrenesulfonate]) and for further functionalization with self-assembled monolayers of phosphonates (SAMPs) was developed. The TiO2 adhesion layer was grown via chemical vapor deposition using a titanium(IV) t-butoxide precursor, and was characterized by goniometry and X-ray photoelectron spectroscopy. TiO 2 grown on a model system, H-terminated silicon, indicated that the surface was t-butoxide terminated. Phenylphosphonic acids were synthesized with a variety of molecular dipoles and were used to change the work function of PEDOT:PSS through the formation of an aggregate surface dipole. Good correlation was found between the z-component of the molecular dipole and the change in work function, indicating that the film was well-ordered and dense. The magnitude of the changes in work function and goniometry measurements were similar to measurements on ITO, a substrate on which phosphonates form well-ordered monolayers. As-grown PEDOT:PSS/TiO 2 electrodes showed a lower work function compared to PEDOT:PSS, which is attributed to residual t-butoxide groups on the TiO 2 surface. UPS measurements revealed that reductions in work function in the modified electrodes lowered the difference in energy between the Fermi energy (EF) of the conducting polymer and the LUMO of PCBM ([6,6]-phenyl-C 61-butyric acid methyl ester). A reduction of this energy difference should translate into increased electron injection in electron-only diodes; however, devices with modified electrodes showed decreased current densities. UPS/IPES measurements show that TiO2 grown using this method has a much larger band gap than bulk or nanocrystalline TiO2, which is likely responsible for this decrease in device currents. At high bias, device currents increase dramatically, and the effects of the phosphonates or t-butoxide terminated TiO2 vanish. This is attributed to a reduction of the TiO2 to

  5. Quasiconvex Programming

    OpenAIRE

    Eppstein, David

    2004-01-01

    We define quasiconvex programming, a form of generalized linear programming in which one seeks the point minimizing the pointwise maximum of a collection of quasiconvex functions. We survey algorithms for solving quasiconvex programs either numerically or via generalizations of the dual simplex method from linear programming, and describe varied applications of this geometric optimization technique in meshing, scientific computation, information visualization, automated algorithm analysis, an...

  6. Rigidity-tuning conductive elastomer

    Science.gov (United States)

    Shan, Wanliang; Diller, Stuart; Tutcuoglu, Abbas; Majidi, Carmel

    2015-06-01

    We introduce a conductive propylene-based elastomer (cPBE) that rapidly and reversibly changes its mechanical rigidity when powered with electrical current. The elastomer is rigid in its natural state, with an elastic (Young’s) modulus of 175.5 MPa, and softens when electrically activated. By embedding the cPBE in an electrically insulating sheet of polydimethylsiloxane (PDMS), we create a cPBE-PDMS composite that can reversibly change its tensile modulus between 37 and 1.5 MPa. The rigidity change takes ˜6 s and is initiated when a 100 V voltage drop is applied across the two ends of the cPBE film. This magnitude of change in elastic rigidity is similar to that observed in natural skeletal muscle and catch connective tissue. We characterize the tunable load-bearing capability of the cPBE-PDMS composite with a motorized tensile test and deadweight experiment. Lastly, we demonstrate the ability to control the routing of internal forces by embedding several cPBE-PDMS ‘active tendons’ into a soft robotic pneumatic bending actuator. Selectively activating the artificial tendons controls the neutral axis and direction of bending during inflation.

  7. Effective electrical conductivity of a nonuniform plasma

    Science.gov (United States)

    Nichols, L. D.

    1975-01-01

    A simple nonuniformity model for calculating effective electrical conductivity and Hall parameter is proposed. The model shows that the effective conductivity can be significantly reduced by nonuniformities in the Hall parameter, even if the local conductivity is uniform.

  8. Composites incorporated a conductive polymer nanofiber network

    Energy Technology Data Exchange (ETDEWEB)

    Pozzo, Lilo Danielle; Newbloom, Gregory

    2017-04-11

    Methods of forming composites that incorporate networks of conductive polymer nanofibers are provided. Networks of less-than conductive polymers are first formed and then doped with a chemical dopant to provide networks of conductive polymers. The networks of conductive polymers are then incorporated into a matrix in order to improve the conductivity of the matrix. The formed composites are useful as conductive coatings for applications including electromagnetic energy management on exterior surfaces of vehicles.

  9. Process evaluation of two environmental nutrition programmes and an educational nutrition programme conducted at supermarkets and worksite cafeterias in the Netherlands

    NARCIS (Netherlands)

    I.H.M. Steenhuis; P. van Assema (Patricia); A. Reubsaet; G.J. Kok (Gerjo)

    2004-01-01

    textabstractThis article describes the process evaluation of two environmental programs and a educational nutrition program, implemented at supermarkets and worksite cafeterias. Studies conducted earlier, indicated that the programs had no effect on consumers’ eating behavior. Consequently, the more

  10. A Program Evaluation of the Lincoln School District Teacher Collaboration Time (TCT) Staff Development Program

    Science.gov (United States)

    Bitterman, Sheila

    2010-01-01

    Many investigators have documented the need for valid and credible program evaluation research of teacher professional development programs. Accordingly, the purpose of this study was to conduct a comprehensive program evaluation of the Lincoln School District's Teacher Collaboration Time (TCT) staff development program. The study questions…

  11. Transportation Outreach Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    1991-08-01

    The Department of Energy (DOE) Transportation Management Program (TMP) is committed to providing opportunities for public interaction, working cooperatively with groups interested in or affected by DOE transportation, and providing information through the development and implementation of its Outreach Program. This Plan describes how the DOE plans to involve the public in its transportation programs. This Transportation Outreach Program Plan will assist the Secretary of Energy is carrying out his vision of the good neighbor'' policy. The Department of Energy encourages face to face interaction and welcomes comments from everyone. Outreach means to go beyond,'' and the TMP, through its Outreach Program, will hear and address the public's concerns and recommendations about transportation of hazardous and radioactive materials. The TMP Outreach Program is based on a commitment to two-way communication. The TMP coordinates transportation policy for all DOE programs to ensure consistent approaches issues and operations. The TMP conducts outreach by interacting with many groups interested in DOE transportation, facilitating resolution of issues and information exchange, and coordinating the DOE's transportation emergency preparedness capabilities. Many of the specific activities in transportation outreach are usually carried out by field and area offices. 4 figs., 2 tabs.

  12. Standards of scientific conduct: are there any?

    Science.gov (United States)

    Kalichman, Michael; Sweet, Monica; Plemmons, Dena

    2014-12-01

    The practice of research is full of ethical challenges, many of which might be addressed through the teaching of responsible conduct of research (RCR). Although such training is increasingly required, there is no clear consensus about either the goals or content of an RCR curriculum. The present study was designed to assess community standards in three domains of research practice: authorship, collaboration, and data management. A survey, developed through advice from content matter experts, focus groups, and interviews, was distributed in November 2010 to U.S. faculty from 50 graduate programs for each of four different disciplines: microbiology, neuroscience, nursing, and psychology. The survey addressed practices and perceived standards, as well as perceptions about teaching and learning. Over 1,300 responses (response rate of 21 %) yielded statistically significant differences in responses to nearly all questions. However the magnitude of these differences was typically small, leaving little reason to argue for community consensus on standards. For nearly all questions asked, the clear finding was that there was nothing approaching consensus. These results may be useful not so much to teach what the standards are, but to increase student awareness of the diversity of those standards in reported practice.

  13. Taking the brakes off proppant-pack conductivity

    Energy Technology Data Exchange (ETDEWEB)

    Gulbis, J.; Hawkins, G.; King, M.; Pulsinelli, R.; Brown, E.; Elphick, J.

    1991-01-01

    Fracture stimulation treatments often fail to achieve predicted results because design data have not accounted for the downhole environment. Since 1986, the Dowell Schlumberger fracture conductivity laboratory has been carrying out realistic evaluations of proppants, fracturing fluids and additives. One element of this program has shown that viscous components of the treatment fluid remain in the proppant and significantly block flow of oil and gas. This knowledge has been applied to develop a new way of breaking down flow resistance, taking the brakes off proppant-pack conductivity. 13 figs., 4 ills., 1 tab., 12 refs.

  14. Land reclamation program description

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-05-01

    The Land Reclamation Program will address the need for coordinated applied and basic research into the physical and ecological problems of land reclamation, and advance the development of cost-effective techniques for reclaiming and rehabilitating mined coal land to productive end uses. The purpose of this new program is to conduct integrated research and development projects focused on near- and long-term reclamation problems in all major U.S. coal resource regions including Alaska and to coordinate, evaluate, and disseminate the results of related studies conducted at other research institutions. The activities of the Land Reclamation Laboratory program will involve close cooperation with industry and focus on establishing a comprehensive field and laboratory effort. Research demonstration sites will be established throughout the United States to address regional and site-specific problems. Close cooperation with related efforts at academic institutions and other agencies, to transfer pertinent information and avoid duplication of effort, will be a primary goal of the program. The major effort will focus on the complete coal extraction/reclamation cycle where necessary to develop solutions to ameliorating the environmental impacts of coal development. A long-range comprehensive national reclamation program will be established that can schedule and prioritize research activities in all of the major coal regions. A fully integrated data management system will be developed to store and manage relevant environmental and land use data. Nine research demonstration sites have been identified.

  15. Making Conductive Polymers By Arc Tracking

    Science.gov (United States)

    Daech, Alfred F.

    1992-01-01

    Experimental technique for fabrication of electrically conductive polymeric filaments based on arc tracking, in which electrical arc creates conductive carbon track in material that initially was insulator. Electrically conductive polymeric structures made by arc tracking aligned along wire on which formed. Alignment particularly suited to high conductivity and desirable in materials intended for testing as candidate superconductors.

  16. 31 CFR 8.52 - Disreputable conduct.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Disreputable conduct. 8.52 Section 8... ALCOHOL, TOBACCO AND FIREARMS Disciplinary Proceedings § 8.52 Disreputable conduct. Disreputable conduct... violation of this provision. (j) Contemptuous conduct in connection with practice before the Bureau...

  17. 32 CFR 1903.14 - Disorderly conduct.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Disorderly conduct. 1903.14 Section 1903.14 National Defense Other Regulations Relating to National Defense CENTRAL INTELLIGENCE AGENCY CONDUCT ON AGENCY INSTALLATIONS § 1903.14 Disorderly conduct. A person commits disorderly conduct when, with intent...

  18. 12 CFR 19.196 - Disreputable conduct.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Disreputable conduct. 19.196 Section 19.196... PROCEDURE Parties and Representational Practice Before the OCC; Standards of Conduct § 19.196 Disreputable conduct. Disreputable conduct for which an individual may be censured, debarred, or suspended from...

  19. 36 CFR 1002.34 - Disorderly conduct.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Disorderly conduct. 1002.34... RECREATION § 1002.34 Disorderly conduct. (a) A person commits disorderly conduct when, with intent to cause... purpose of the actor's conduct, location, time of day or night, and other factors that would govern the...

  20. 25 CFR 11.441 - Disorderly conduct.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Disorderly conduct. 11.441 Section 11.441 Indians BUREAU... ORDER CODE Criminal Offenses § 11.441 Disorderly conduct. (a) A person is guilty of disorderly conduct... or she persists in disorderly conduct after reasonable warning or request to desist. Otherwise...

  1. Proton conducting membrane using a solid acid

    Science.gov (United States)

    Haile, Sossina M. (Inventor); Chisholm, Calum (Inventor); Boysen, Dane A. (Inventor); Narayanan, Sekharipuram R. (Inventor)

    2006-01-01

    A solid acid material is used as a proton conducting membrane in an electrochemical device. The solid acid material can be one of a plurality of different kinds of materials. A binder can be added, and that binder can be either a nonconducting or a conducting binder. Nonconducting binders can be, for example, a polymer or a glass. A conducting binder enables the device to be both proton conducting and electron conducting.

  2. An Analysis on Distance Education Computer Programming Students' Attitudes Regarding Programming and Their Self-Efficacy for Programming

    Science.gov (United States)

    Ozyurt, Ozcan

    2015-01-01

    This study aims to analyze the attitudes of students studying computer programming through the distance education regarding programming, and their self-efficacy for programming and the relation between these two factors. The study is conducted with 104 students being thought with distance education in a university in the north region of Turkey in…

  3. Gifted Education and National Standards: A K-5 Program Evaluation

    Science.gov (United States)

    Harwell-Braun, Debra A.

    2010-01-01

    The purpose of this study was to conduct a program evaluation of a K-5 Gifted Education Program. Program evaluation addressed how well the gifted education program studied met the National Association of Gifted Children standards. In addition, this study included stakeholder perceptions of the current gifted education program K-5. This program…

  4. Program Fullerene

    DEFF Research Database (Denmark)

    Wirz, Lukas; Peter, Schwerdtfeger,; Avery, James Emil

    2013-01-01

    Fullerene (Version 4.4), is a general purpose open-source program that can generate any fullerene isomer, perform topological and graph theoretical analysis, as well as calculate a number of physical and chemical properties. The program creates symmetric planar drawings of the fullerene graph, an......-Fowler, and Brinkmann-Fowler vertex insertions. The program is written in standard Fortran and C++, and can easily be installed on a Linux or UNIX environment....

  5. Effective Programming

    DEFF Research Database (Denmark)

    Frost, Jacob

    To investigate the use of VTLoE as a basis for formal derivation of functional programs with effects. As a part of the process, a number of issues central to effective formal programming are considered. In particular it is considered how to develop a proof system suitable for pratical reasoning......, how to implement this system in the generic proof assistant Isabelle and finally how to apply the logic and the implementation to programming....

  6. Programming F#

    CERN Document Server

    Smith, Chris

    2009-01-01

    Why learn F#? This multi-paradigm language not only offers you an enormous productivity boost through functional programming, it also lets you develop applications using your existing object-oriented and imperative programming skills. With Programming F#, you'll quickly discover the many advantages of Microsoft's new language, which includes access to all the great tools and libraries of the .NET platform. Learn how to reap the benefits of functional programming for your next project -- whether it's quantitative computing, large-scale data exploration, or even a pursuit of your own. With th

  7. Programming Interactivity

    CERN Document Server

    Noble, Joshua

    2009-01-01

    Make cool stuff. If you're a designer or artist without a lot of programming experience, this book will teach you to work with 2D and 3D graphics, sound, physical interaction, and electronic circuitry to create all sorts of interesting and compelling experiences -- online and off. Programming Interactivity explains programming and electrical engineering basics, and introduces three freely available tools created specifically for artists and designers: Processing, a Java-based programming language and environment for building projects on the desktop, Web, or mobile phonesArduino, a system t

  8. 20 CFR 220.64 - Program integrity.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Program integrity. 220.64 Section 220.64... DISABILITY Consultative Examinations § 220.64 Program integrity. The Board will not use in its program any... for reasons bearing on professional competence, professional conduct, or financial integrity; who has...

  9. Miramar College Program Evaluation: Criminal Justice.

    Science.gov (United States)

    Moriyama, Bruce; Brumley, Leslie

    Qualitative and quantitative data are presented in this evaluation of the curricular, personnel, and financial status of Miramar College's program in criminal justice. The report first outlines the information gathered in an interview with the program chairperson, conducted to determine program objectives and goals and how they were determined,…

  10. 42 CFR 488.334 - Educational programs.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Educational programs. 488.334 Section 488.334... Certification of Long-Term Care Facilities § 488.334 Educational programs. A State must conduct periodic educational programs for the staff and residents (and their representatives) of SNFs and NFs in order...

  11. Invisible Roles of Doctoral Program Specialists

    Science.gov (United States)

    Bachman, Eva Burns; Grady, Marilyn L.

    2016-01-01

    The purpose of this study was to investigate the roles of doctoral program specialists in Big Ten universities. Face-to-face interviews with 20 doctoral program specialists employed in institutions in the Big Ten were conducted. Participants were asked to describe their roles within their work place. The doctoral program specialists reported their…

  12. Regional monitoring program

    Energy Technology Data Exchange (ETDEWEB)

    Andersen, B.V.; Soldat, J.K.

    1957-08-26

    The purpose of the Regional Monitoring program is to conduct surveys to detect, measure, and to evaluate environmental radiation, particularly that of HAPO origin. Estimations of total environmental dose and HAPO's contribution to this dose, in units of fraction of public exposure limits, are calculated. Corollary functions include the use of Regional Monitoring data to establish and predict trends in environmental exposure components, and to facilitate correlation of environmental radioactivity with plant processes, process changes, and waste disposal practices.

  13. Computer Programs for Electromagnetic Coupling between a Conducting Body and an Aperture in an Infinite Conducting Plane.

    Science.gov (United States)

    1984-03-01

    method of Gaussian elimination. Inputs are the matrix A(N, N), N, and a small constant EPS. The output ISW = 1 if the absolute value of the pivot of...A5 lF(ABSlA6),LE.1.E-04)GC TO 5 ALI12.*SOPT (A.B-E) *SQRT (E*DGP) AL2=2.* SQRT LA.l- E) * SGPT (AOC+F) AL 3= f2. *E-C E- 1) AL4= (2.*A.C-D-E) AJ1=A

  14. Development of Advanced Low Conductivity Thermal Barrier Coatings

    Science.gov (United States)

    Zhu, Dong-Ming; Miller, Robert A.

    2004-01-01

    Advanced multi-component, low conductivity oxide thermal barrier coatings have been developed using an approach that emphasizes real-time monitoring of thermal conductivity under conditions that are engine-like in terms of temperatures and heat fluxes. This is in contrast to the traditional approach where coatings are initially optimized in terms of furnace and burner rig durability with subsequent measurement in the as-processed or furnace-sintered condition. The present work establishes a laser high-heat-flux test as the basis for evaluating advanced plasma-sprayed and electron beam-physical vapor deposited (EB-PVD) thermal barrier coatings under the NASA Ultra-Efficient Engine Technology (UEET) Program. The candidate coating materials for this program are novel thermal barrier coatings that are found to have significantly reduced thermal conductivities and improved thermal stability due to an oxide-defect-cluster design. Critical issues for designing advanced low conductivity coatings with improved coating durability are also discussed.

  15. High Thermal Conductivity Functionally Graded Heat Sinks for High Power Packaging Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This NASA SBIR Phase I program proposes the development of a high thermal conductivity (400 W/mK), low coefficient of thermal expansion (7-10 ppm/?K), and light...

  16. Novel Conductive Water Removal Membrane (CWRM) for PEM Passive Fuel Cell Operation Project

    Data.gov (United States)

    National Aeronautics and Space Administration — ElectroChem proposes a Phase II program to advance its Phase I effort, to develop a conductive water removal membrane to enable passive, high current density PEMFC...

  17. Computer Programs.

    Science.gov (United States)

    Anderson, Tiffoni

    This module provides information on development and use of a Material Safety Data Sheet (MSDS) software program that seeks to link literacy skills education, safety training, and human-centered design. Section 1 discusses the development of the software program that helps workers understand the MSDSs that accompany the chemicals with which they…

  18. Choreographic Programming

    DEFF Research Database (Denmark)

    Montesi, Fabrizio

    , as they offer a concise view of the message flows enacted by a system. For this reason, in the last decade choreographies have been used in the development of programming languages, giving rise to a programming paradigm that in this dissertation we refer to as Choreographic Programming. Recent studies show...... sessions; it remains thus unclear whether choreographies can still guarantee safety when dealing with such nontrivial features. This PhD dissertation argues for the suitability of choreographic programming as a paradigm for the development of safe distributed systems. We proceed by investigating its...... foundations and application. To this aim, we provide three main contributions. The first contribution is the development of a formal model for choreographic programming that supports asynchrony, mobility, modularity, and multiparty sessions. In the model, choreographies are projected to distributed endpoint...

  19. A Program Review

    Directory of Open Access Journals (Sweden)

    Jale Aldemir

    2014-08-01

    Full Text Available The purpose of this study was to discover the transformation preschool teacher candidates go through in their perceptions about teacher and teaching during their teacher education program. The participants of the study were 35 senior students enrolled in the preschool teacher education program at a university located in the Eastern Anatolian Region of Turkey. A qualitative survey instrument was conducted to examine the preservice teachers’ perceptions. The data collected from the survey were analyzed by adopting a constant comparative coding method. The study revealed a change in the participants’ perceptions about preschool education before and after they enrolled in the program. The hardest parts of teaching in preschool were the need of high level of energy, patience, and skills to manage the classroom while the most pleasurable sides were having fun, play opportunities, and the positive impact teachers make on children. The qualities of an ideal preschool program listed by the participants involved curriculum, physical environment, and social-emotional atmosphere while the themes regarding the ideal preschool teacher were revolved around the personal qualities, professional attitude, and professional knowledge and skills. Hence, the findings of this qualitative study can only be generalized in the context the study was conducted; however, the study could have important implications for preschool teacher education in Turkey and in other countries, and help the international readers perceive preschool teacher education from a different perspective.

  20. Synthesis of novel electrically conducting polymers: Potential conducting Langmuir-Blodgett films and conducting polymers on defined surfaces

    Science.gov (United States)

    Zimmer, Hans

    1993-01-01

    Based on previous results involving thiophene derived electrically conducting polymers in which it was shown that thiophene, 3-substituted thiophenes, furans, and certain oligomers of these compounds showed electrical conductivity after polymerization. The conductivity was in the order of up to 500 S/cm. In addition, these polymers showed conductivity without being doped and most of all they were practically inert toward ambient conditions. They even could be used in aqueous media. With these findings as a guide, a number of 3-long-chain-substituted thiophenes and 1-substituted-3-long-chain substituted pyrrols were synthesized as monomers for potential polymeric electrically conducting Langmuir-Blodgett films.

  1. Direct current hopping conductance along DNA chain

    Institute of Scientific and Technical Information of China (English)

    Ma Song-Shan; Xu Hui; Liu Xiao-Liang; Li Ming-Jun

    2007-01-01

    This paper proposes a model of direct current(DC) electron hopping transport in DNA,in which DNA is considered as a binary one-dimensional disordered system.To quantitatively study the DC conductivity in DNA,it numerically calculates the DC conductivity of DNA chains with difierent parameter values.The result shows that the DC conductivity of DNA chain increases with the increase of temperature.And the conductivity of DNA chain is depended on the probability P.which represents the degree of compositional disorder in a DNA sequence to some extent.For P<0.5,the conductivity of DNA chain decreases with the increase of P,while for P≥0.5,the conductivity increases with the increase of p.The DC conductivity in DNA chain also varies with the change of the electric field,it presents non-Ohm's law conductivity characteristics.

  2. Electrical Resistance Tomography of Conductive Thin Films

    CERN Document Server

    Cultrera, Alessandro

    2016-01-01

    The Electrical Resistance Tomography (ERT) technique is applied to the measurement of sheet conductance maps of both uniform and patterned conductive thin films. Images of the sheet conductance spatial distribution, and local conductivity values are obtained. Test samples are tin oxide films on glass substrates, with electrical contacts on the sample boundary, some samples are deliberately patterned in order to induce null conductivity zones of known geometry while others contain higher conductivity inclusions. Four-terminal resistance measurements among the contacts are performed with a scanning setup. The ERT reconstruction is performed by a numerical algorithm based on the total variation regularization and the L-curve method. ERT correctly images the sheet conductance spatial distribution of the samples. The reconstructed conductance values are in good quantitative agreement with independent measurements performed with the van der Pauw and the four-point probe methods.

  3. Mammography accreditation program

    Energy Technology Data Exchange (ETDEWEB)

    Wilcox, P.

    1993-12-31

    In the mid-1980`s, the movement toward the use of dedicated mammography equipment provided significant improvement in breast cancer detection. However, several studies demonstrated that this change was not sufficient to ensure optimal image quality at a low radiation dose. In particular, the 1985 Nationwide Evaluation of X-ray Trends identified the wide variations in image quality and radiation dose, even from dedicated units. During this time period, the American Cancer Society (ACS) launched its Breast Cancer Awareness Screening Campaign. However, there were concerns about the ability of radiology to respond to the increased demand for optimal screening examinations that would result from the ACS program. To respond to these concerns, the ACS and the American College of Radiology (ACR) established a joint committee on mammography screening in 1986. After much discussion, it was decided to use the ACR Diagnostic Practice Accreditation Program as a model for the development of a mammography accreditation program. However, some constraints were required in order to make the program meet the needs of the ACS. This voluntary, peer review program had to be timely and cost effective. It was determined that the best way to address these needs would be to conduct the program by mail. Finally, by placing emphasis on the educational nature of the program, it would provide an even greater opportunity for improving mammographic quality. The result of this effort was that, almost six years ago, in May 1987, the pilot study for the ACR Mammography Accreditation Program (MAP) began, and in August of that year, the first applications were received. In November 1987, the first 3-year accreditation certificates were awarded.

  4. 39 CFR 447.21 - Prohibited conduct.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Prohibited conduct. 447.21 Section 447.21 Postal Service UNITED STATES POSTAL SERVICE PERSONNEL RULES OF CONDUCT FOR POSTAL EMPLOYEES Employee Conduct..., or for appointment in the U.S. Postal Service, when these activities are dependent on information...

  5. Ionic conduction of lithium hydride single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Pilipenko, G.I.; Oparin, D.V.; Zhuravlev, N.A.; Gavrilov, F.F.

    1987-09-01

    Using the electrical-conductivity- and NMR-measurement- methods, the ionic-conduction mechanism is established in stoichiometric lithium hydride single crystals. The activation energies of migration of anion- and cation-vacancies and the formation of Schottky-pair defects are determined. They assume that the mechanisms of self-diffusion and conductivity are different in lithium hydride.

  6. The Workshop on Conductive Polymers: Final Report

    Science.gov (United States)

    1985-10-01

    Reports are made by groups on: polyacetylene, polyphenylene, polyaniline, and related systems; molecular, crystallographic, and defect structures in conducting polymers; heterocyclic polymers; synthesis of new and improved conducting polymers; future applications possibilities for conducting polymers; and challenges for improved understanding of properties. (DLC)

  7. Electrically conducting polymers for aerospace applications

    Science.gov (United States)

    Meador, Mary Ann B.; Gaier, James R.; Good, Brian S.; Sharp, G. R.; Meador, Michael A.

    1991-01-01

    Current research on electrically conducting polymers from 1974 to the present is reviewed focusing on the development of materials for aeronautic and space applications. Problems discussed include extended pi-systems, pyrolytic polymers, charge-transfer systems, conductive matrix resins for composite materials, and prospects for the use of conducting polymers in space photovoltaics.

  8. 45 CFR 81.111 - Conduct.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Conduct. 81.111 Section 81.111 Public Welfare... 80 OF THIS TITLE Judicial Standards of Practice § 81.111 Conduct. Parties and their representatives are expected to conduct themselves with honor and dignity and observe judicial standards of practice...

  9. 36 CFR 2.34 - Disorderly conduct.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Disorderly conduct. 2.34... RESOURCE PROTECTION, PUBLIC USE AND RECREATION § 2.34 Disorderly conduct. (a) A person commits disorderly conduct when, with intent to cause public alarm, nuisance, jeopardy or violence, or knowingly or...

  10. 38 CFR 18b.90 - Conduct.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Conduct. 18b.90 Section 18b.90 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) PRACTICE AND... Practice § 18b.90 Conduct. Parties and their representatives are expected to conduct themselves with honor...

  11. 76 FR 15856 - Standards of Conduct

    Science.gov (United States)

    2011-03-22

    ... ADMINISTRATION 41 CFR Part 105-735 RIN 3090-AJ10 Standards of Conduct AGENCY: General Services Administration... standards of conduct. DATES: Effective Date: This final rule is effective March 22, 2011. FOR FURTHER..., November 1, 1995 which codified GSA's supplemental standards of ethical conduct in the new 5 CFR part 6701...

  12. 14 CFR 300.5 - Prohibited conduct.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Prohibited conduct. 300.5 Section 300.5 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF TRANSPORTATION (AVIATION PROCEEDINGS) PROCEDURAL REGULATIONS RULES OF CONDUCT IN DOT PROCEEDINGS UNDER THIS CHAPTER § 300.5 Prohibited conduct. No person shall...

  13. 17 CFR 200.56 - Personal conduct.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Personal conduct. 200.56 Section 200.56 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION ORGANIZATION; CONDUCT AND ETHICS; AND INFORMATION AND REQUESTS Canons of Ethics § 200.56 Personal conduct. Appointment to...

  14. 32 CFR 776.5 - Judicial conduct.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Judicial conduct. 776.5 Section 776.5 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY MISCELLANEOUS RULES PROFESSIONAL CONDUCT... § 776.5 Judicial conduct. To the extent that it does not conflict with statutes, regulations, or this...

  15. 34 CFR 101.111 - Conduct.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Conduct. 101.111 Section 101.111 Education Regulations of the Offices of the Department of Education OFFICE FOR CIVIL RIGHTS, DEPARTMENT OF EDUCATION... Conduct. Parties and their representatives are expected to conduct themselves with honor and dignity and...

  16. Testing Conducted for Lithium-Ion Cell and Battery Verification

    Science.gov (United States)

    Reid, Concha M.; Miller, Thomas B.; Manzo, Michelle A.

    2004-01-01

    The NASA Glenn Research Center has been conducting in-house testing in support of NASA's Lithium-Ion Cell Verification Test Program, which is evaluating the performance of lithium-ion cells and batteries for NASA mission operations. The test program is supported by NASA's Office of Aerospace Technology under the NASA Aerospace Flight Battery Systems Program, which serves to bridge the gap between the development of technology advances and the realization of these advances into mission applications. During fiscal year 2003, much of the in-house testing effort focused on the evaluation of a flight battery originally intended for use on the Mars Surveyor Program 2001 Lander. Results of this testing will be compared with the results for similar batteries being tested at the Jet Propulsion Laboratory, the Air Force Research Laboratory, and the Naval Research Laboratory. Ultimately, this work will be used to validate lithium-ion battery technology for future space missions. The Mars Surveyor Program 2001 Lander battery was characterized at several different voltages and temperatures before life-cycle testing was begun. During characterization, the battery displayed excellent capacity and efficiency characteristics across a range of temperatures and charge/discharge conditions. Currently, the battery is undergoing lifecycle testing at 0 C and 40-percent depth of discharge under low-Earth-orbit (LEO) conditions.

  17. Programming Python

    CERN Document Server

    Lutz, Mark

    2011-01-01

    If you've mastered Python's fundamentals, you're ready to start using it to get real work done. Programming Python will show you how, with in-depth tutorials on the language's primary application domains: system administration, GUIs, and the Web. You'll also explore how Python is used in databases, networking, front-end scripting layers, text processing, and more. This book focuses on commonly used tools and libraries to give you a comprehensive understanding of Python's many roles in practical, real-world programming. You'll learn language syntax and programming techniques in a clear and co

  18. 2012 Wind Program Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    Zayas, Jose [Energy Efficiencey and Renewable Energy (EERE), Washington, DC (United States); Higgins, Mark [Energy Efficiencey and Renewable Energy (EERE), Washington, DC (United States)

    2012-06-01

    This report summarizes the proceedings of the 2012 Wind Program Peer Review, the goals of which were to review and evaluate the strategy and goals of the Wind Program; review and evaluate the progress and accomplishments of the program's projects funded in fiscal year (FY) 2010 and FY 2011; and foster interactions among the national laboratories, industry, and academic institutions conducting research and development on behalf of the program.

  19. Conducting polymers in electronic chemical sensors.

    Science.gov (United States)

    Janata, Jiri; Josowicz, Mira

    2003-01-01

    Conducting organic polymers have found two main kinds of application in electronics so far: as materials for construction of various devices and as selective layers in chemical sensors. In either case, interaction with ambient gases is critical. It may compromise the performance of a device based on conducting polymers, whereas it is beneficial in a sensor. Conductivity has been the primary property of interest. Work function--related to conductivity, but in principle a different property--has received only scant attention. Our aim here is to discuss the usability of conducting polymers in both types of electronic applications in light of these two parameters.

  20. Electrochemical Study of Conductive Gel Polymer

    Institute of Scientific and Technical Information of China (English)

    Zhaohui Li; Jing Jiang; Gangtie Lei

    2005-01-01

    @@ 1Introduction Conventional ion-conducting polymer consists of electrolyte salt and polymer matrix, so-called salt-inpolymer. It possesses lower conductivity because the migration of ions depends on the motion of polymer segmental. To increase the ionic conductivity, a kind of gel polymer film (GPF) was prepared by in situ polymerization of methyl methacrylate (MMA) monomer in room-temperature ionic liquid(RTIL), 1-butyl-3-methylimidazolium hexafluorophosphate (BMIPF6). Due to immeasurably low vapor pressure, high ionic conductivity, and greater thermal and electrochemical stability, BMIPF6 is suitable electrolyte salts for ion-conducting polymer.

  1. The symmetry of single-molecule conduction.

    Science.gov (United States)

    Solomon, Gemma C; Gagliardi, Alessio; Pecchia, Alessandro; Frauenheim, Thomas; Di Carlo, Aldo; Reimers, Jeffrey R; Hush, Noel S

    2006-11-14

    We introduce the conductance point group which defines the symmetry of single-molecule conduction within the nonequilibrium Green's function formalism. It is shown, either rigorously or to within a very good approximation, to correspond to a molecular-conductance point group defined purely in terms of the properties of the conducting molecule. This enables single-molecule conductivity to be described in terms of key qualitative chemical descriptors that are independent of the nature of the molecule-conductor interfaces. We apply this to demonstrate how symmetry controls the conduction through 1,4-benzenedithiol chemisorbed to gold electrodes as an example system, listing also the molecular-conductance point groups for a range of molecules commonly used in molecular electronics research.

  2. High frequency conductivity in carbon nanotubes

    Directory of Open Access Journals (Sweden)

    S. S. Abukari

    2012-12-01

    Full Text Available We report on theoretical analysis of high frequency conductivity in carbon nanotubes. Using the kinetic equation with constant relaxation time, an analytical expression for the complex conductivity is obtained. The real part of the complex conductivity is initially negative at zero frequency and become more negative with increasing frequency, until it reaches a resonance minimum at ω ∼ ωB for metallic zigzag CNs and ω < ωB for armchair CNs. This resonance enhancement is indicative for terahertz gain without the formation of current instabilities induced by negative dc conductivity. We noted that due to the high density of states of conduction electrons in metallic zigzag carbon nanotubes and the specific dispersion law inherent in hexagonal crystalline structure result in a uniquely high frequency conductivity than the corresponding values for metallic armchair carbon nanotubes. We suggest that this phenomenon can be used to suppress current instabilities that are normally associated with a negative dc differential conductivity.

  3. Charge-transport model for conducting polymers

    Science.gov (United States)

    Dongmin Kang, Stephen; Jeffrey Snyder, G.

    2016-11-01

    The growing technological importance of conducting polymers makes the fundamental understanding of their charge transport extremely important for materials and process design. Various hopping and mobility edge transport mechanisms have been proposed, but their experimental verification is limited to poor conductors. Now that advanced organic and polymer semiconductors have shown high conductivity approaching that of metals, the transport mechanism should be discernible by modelling the transport like a semiconductor with a transport edge and a transport parameter s. Here we analyse the electrical conductivity and Seebeck coefficient together and determine that most polymers (except possibly PEDOT:tosylate) have s = 3 and thermally activated conductivity, whereas s = 1 and itinerant conductivity is typically found in crystalline semiconductors and metals. The different transport in polymers may result from the percolation of charge carriers from conducting ordered regions through poorly conducting disordered regions, consistent with what has been expected from structural studies.

  4. Overseas programs

    Science.gov (United States)

    1983-06-01

    Subprograms of the Overseas Program of the Australian Bureau of Mineral Resources are presented and discussed. Topics addressed in the subprograms include volcanology, the geology and geophysics of Southwest Pacific island arcs and structural basins, and antarctic paleomagnetism and geology.

  5. Linear programming

    CERN Document Server

    Solow, Daniel

    2014-01-01

    This text covers the basic theory and computation for a first course in linear programming, including substantial material on mathematical proof techniques and sophisticated computation methods. Includes Appendix on using Excel. 1984 edition.

  6. Russia air management program

    Energy Technology Data Exchange (ETDEWEB)

    Pace, T.G. [U.S. Environmental Protection Agency, NC (United States); Markin, S. [Ministry of Environmental Protection and Natural Resources, Moscow (Sweden); Kosenkova, S.V. [Volgograd Environmental Services Administration, Volgograd (Russian Federation)

    1995-12-31

    The Russia Air Management Program is in the second year of a four-year cooperative program between the Russian Ministry of Environmental Protection and Natural Resources (MEPNR) and the U.S. Environmental Protection Agency (EPA) to improve national institutions, policies, and practices for air quality management in Russia. This program is part of the Environmental Policy and Technology project being conducted by the U.S. Agency for International Development. The Russia Air Management Program will pilot the application of potential air program improvements in the important industrial City of Volgograd which will enable the development, practical demonstration and evaluation of alternative approaches for improving AQM policies and practices in Russia. Volgograd has a progressive and environmentally enlightened local government, a diverse industrial base and a relatively healthy economy. It is located south of Moscow on the Volga River and was proposed by the Ministry of Environmental Protection and Natural Resources. It was selected after a site visit and a series of discussions with the Ministry, Volgograd officials, the World Bank and the EPA. Following the pilot, RAMP will work to facilitate implementation of selected parts of the pilot in other areas of Russia using training, technology transfer, and public awareness. (author)

  7. Northeast Regional Biomass Program

    Energy Technology Data Exchange (ETDEWEB)

    Lusk, P.D.

    1992-12-01

    The Northeast Regional Biomass Program has been in operation for a period of nine years. During this time, state managed programs and technical programs have been conducted covering a wide range of activities primarily aim at the use and applications of wood as a fuel. These activities include: assessments of available biomass resources; surveys to determine what industries, businesses, institutions, and utility companies use wood and wood waste for fuel; and workshops, seminars, and demonstrations to provide technical assistance. In the Northeast, an estimated 6.2 million tons of wood are used in the commercial and industrial sector, where 12.5 million cords are used for residential heating annually. Of this useage, 1504.7 mw of power has been generated from biomass. The use of wood energy products has had substantial employment and income benefits in the region. Although wood and woodwaste have received primary emphasis in the regional program, the use of municipal solid waste has received increased emphasis as an energy source. The energy contribution of biomass will increase as potentia users become more familiar with existing feedstocks, technologies, and applications. The Northeast Regional Biomass Program is designed to support region-specific to overcome near-term barriers to biomass energy use.

  8. The Role of Conductive Education in the Management of the Individual with Cerebral Palsy.

    Science.gov (United States)

    Kottler, Sylvia B.

    The paper describes the system of conductive education for use with cerebral palsy and multihandicapped children which is based on the research of A. Peto. Conductive education is explained to involve such techniques as individualization of program and instruction, task analysis, transdisciplinary team organization, generalization of all learning,…

  9. SPOT Program

    Science.gov (United States)

    Smith, Jason T.; Welsh, Sam J.; Farinetti, Antonio L.; Wegner, Tim; Blakeslee, James; Deboeck, Toni F.; Dyer, Daniel; Corley, Bryan M.; Ollivierre, Jarmaine; Kramer, Leonard; Zimmerman, Patrick L.; Khatri, Reshma

    2010-01-01

    A Spacecraft Position Optimal Tracking (SPOT) program was developed to process Global Positioning System (GPS) data, sent via telemetry from a spacecraft, to generate accurate navigation estimates of the vehicle position and velocity (state vector) using a Kalman filter. This program uses the GPS onboard receiver measurements to sequentially calculate the vehicle state vectors and provide this information to ground flight controllers. It is the first real-time ground-based shuttle navigation application using onboard sensors. The program is compact, portable, self-contained, and can run on a variety of UNIX or Linux computers. The program has a modular objec-toriented design that supports application-specific plugins such as data corruption remediation pre-processing and remote graphics display. The Kalman filter is extensible to additional sensor types or force models. The Kalman filter design is also strong against data dropouts because it uses physical models from state and covariance propagation in the absence of data. The design of this program separates the functionalities of SPOT into six different executable processes. This allows for the individual processes to be connected in an a la carte manner, making the feature set and executable complexity of SPOT adaptable to the needs of the user. Also, these processes need not be executed on the same workstation. This allows for communications between SPOT processes executing on the same Local Area Network (LAN). Thus, SPOT can be executed in a distributed sense with the capability for a team of flight controllers to efficiently share the same trajectory information currently being computed by the program. SPOT is used in the Mission Control Center (MCC) for Space Shuttle Program (SSP) and International Space Station Program (ISSP) operations, and can also be used as a post -flight analysis tool. It is primarily used for situational awareness, and for contingency situations.

  10. Electrical conductivity, ionic conductivity, optical absorption, and gas separation properties of ionically conductive polymer membranes embedded with Si microwire arrays

    OpenAIRE

    Spurgeon, Joshua M.; Walter, Michael G.; Zhou, Junfeng; Kohl, Paul A.; Lewis, Nathan S.

    2011-01-01

    The optical absorption, ionic conductivity, electronic conductivity, and gas separation properties have been evaluated for flexible composite films of ionically conductive polymers that contain partially embedded arrays of ordered, crystalline, p-type Si microwires. The cation exchange ionomer Nafion, and a recently developed anion exchange ionomer, poly(arylene ether sulfone) that contains quaternary ammonium groups (QAPSF), produced composite microwire array/ionomer membrane films that were...

  11. 2010 Annual Progress Report: DOE Hydrogen Program

    Energy Technology Data Exchange (ETDEWEB)

    2011-02-01

    In the past year, the DOE Hydrogen Program (the Program) made substantial progress toward its goals and objectives. The Program has conducted comprehensive and focused efforts to enable the widespread commercialization of hydrogen and fuel cell technologies in diverse sectors of the economy. With emphasis on applications that will effectively strengthen our nation's energy security and improve our stewardship of the environment, the Program engages in research, development, and demonstration of critical improvements in the technologies. Highlights of the Program's accomplishments can be found in the sub-program chapters of this report.

  12. Geothermal Technologies Program 2011 Peer Review Report

    Energy Technology Data Exchange (ETDEWEB)

    Hollett, Douglas [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States); Stillman, Greg [Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

    2011-06-01

    On June 6-10, 2011, the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Geothermal Technologies Program (GTP or the Program) conducted its annual program peer review in Bethesda, Maryland. In accordance with the EERE Peer Review Guide, the review provides an independent, expert evaluation of the strategic goals and direction of the program and is a forum for feedback and recommendations on future program planning. The purpose of the review was to evaluate DOE-funded projects for their contribution to the mission and goals of the Program and to assess progress made against stated objectives.

  13. 泌乳素腺瘤中ER、bFGF、PTTG的表达及其相互关系%Expression of ER, bFGF, and PTTC in human prolactinomas and its relationship

    Institute of Scientific and Technical Information of China (English)

    崔友强; 滕良珠; 李国新

    2005-01-01

    @@ 近几年泌乳素腺瘤(prolactinomas, PRL)在垂体瘤中的比例逐渐增高,约占垂体腺瘤的40%~60%[1].本文对泌乳素腺瘤中的血清PRL水平,雌激素受体(estrogen receptor, ER)、与碱性成纤维因子(basic fibroblast growth factor, bFGF)及垂体瘤转化基因(pituitary tumor transforming gene, PTTG)进行研究,分析其相互关系,探讨它们在肿瘤形成中的作用.

  14. Performance objectives and criteria for conducting DOE environmental audits

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-01-01

    This document contains the Performance Objectives and Criteria (POC) that have been developed for environmental audits and assessments conducted by the Office of the Assistant Secretary for Environment, Safety and Health. The Environmental POC can serve multiple purposes. Primarily, they are to serve as guidelines for the technical specialists conducted the audits and assessments, and for the team management. The POC can also serve as supporting documents for training of technical discipline specialists and Team Leaders and as bases for DOE programs and field offices and contractors conducting audit or assessment activities or improving environmental protection programs. It must be recognized that not all of the POC will necessarily apply to all DOE facilities. The users of this document must rely upon their knowledge of the facility and their professional judgment, or the judgment of qualified environmental professionals to determine the applicability of each POC. The POC cover eleven technical disciplines: air; surface water and drinking water quality; groundwater; waste management; toxic and chemical materials; radiation; quality assurance; inactive waste sites and releases; ecological and cultural resources; the National Environmental Policy Act (NEPA); and environmental management systems.

  15. Transparent Conducting Oxides for Infrared Plasmonic Waveguides: ZnO (Preprint)

    Science.gov (United States)

    2014-01-15

    AFRL-RY-WP-TP-2014-0009 TRANSPARENT CONDUCTING OXIDES FOR INFRARED PLASMONIC WAVEGUIDES: ZnO (PREPRINT) Monica Allen, Jeffery Allen...CONDUCTING OXIDES FOR INFRARED PLASMONIC WAVEGUIDES: ZnO (PREPRINT) 5a. CONTRACT NUMBER In-house 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER N...for plasmonic waveguiding applications with an emphasis on highly conducting ZnO . In addition, the paper contains analysis of a set of thin Al-doped

  16. Finite-element technique applied to heat conduction in solids with temperature dependent thermal conductivity

    Science.gov (United States)

    Aguirre-Ramirez, G.; Oden, J. T.

    1969-01-01

    Finite element method applied to heat conduction in solids with temperature dependent thermal conductivity, using nonlinear constitutive equation for heat ABCDEFGHIABCDEFGHIABCDEFGHIABCDEFGHIABCDEFGHIABCDEFGHIABCDEFGHIABCDEFGHIABCDEFGHIABCDEFGHIABCDEFGHIABCDEFGH

  17. Theory of electrical conductivities of ferrogels

    CERN Document Server

    Huang, J P

    2004-01-01

    Conductive organic polymers can be formulated with polymers that incorporate fine dispersed metallic particles. In this work, we present a general model for ferrogels which are chemically cross-linked polymer networks swollen with a ferrofluid. Our aim is to study the effect of the shape and/or material (conductivity) anisotropy on the effective electrical conductivity of the ferrogel in the presence of an external magnetic field. Our theory can reproduce the known results, and provides a link between the particle property and orientation distribution and the effective electrical conductivity. To this end, we find that material (conductivity) anisotropies are more important to yield a high effective electrical conductivity than shape anisotropies, while magnetic fields can offer a correction.

  18. Modeling Classical Heat Conduction in FLAG

    Energy Technology Data Exchange (ETDEWEB)

    Ramsey, Scott D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hendon, Raymond Cori [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-01-12

    The Los Alamos National Laboratory FLAG code contains both electron and ion heat conduction modules; these have been constructed to be directly relevant to user application problems. However, formal code verification of these modules requires quantitative comparison to exact solutions of the underlying mathematical models. A wide variety of exact solutions to the classical heat conduction equation are available for this purpose. This report summarizes efforts involving the representation of the classical heat conduction equation as following from the large electron-ion coupling limit of the electron and ion 3T temperature equations, subject to electron and ion conduction processes. In FLAG, this limiting behavior is quantitatively verified using a simple exact solution of the classical heat conduction equation. For this test problem, both heat conduction modules produce nearly identical spatial electron and ion temperature profiles that converge at slightly less than 2nd order to the corresponding exact solution.

  19. Effective Thermal Conductivity of Corrugated Insulating Materials

    Science.gov (United States)

    Yamada, Etsuro; Kato, Masayasu; Tomikawa, Takayuki; Takahashi, Kaneko

    The effective thermal conductivity of corrugated insulating materials which are made by polypropylene or polycarbonate have been measured by employing steady state comparison method for several specimen having various thickness and specific weight. The thermal conductivity of them evaluated are also by using the thermal resistance models, and are compared with above measured values and raw materials' conductivity. The main results obtained in this paper are as follows: (1) In regard to the specimen in this paper, the effective thermal conductivity increases with increasing temperature, but the increasing rate of them is small. (2) There are considerable differences between the measured values and the predicted ones that are estimated by using the thermal resistance model in which heat flow by conduction only. This differences increase with increasing specimens' thickness. This difference become extinct by considering the coexistence heat flow of conduction and radiation in the air phase of specimen. (3) The thermal resistance of specimen increases linearly with increasing specimens' thickness.

  20. Hopping models for ion conduction in noncrystals

    DEFF Research Database (Denmark)

    Dyre, Jeppe; Schrøder, Thomas

    2007-01-01

    Ion conduction in noncrystals (glasses, polymers, etc) has a number of properties in common. In fact, from a purely phenomenological point of view, these properties are even more widely observed: ion conduction behaves much like electronic conduction in disordered materials (e.g., amorphous...... semiconductors). These universalities are subject of much current interest, for instance interpreted in the context of simple hopping models. In the present paper we first discuss the temperature dependence of the dc conductivity in hopping models and the importance of the percolation phenomenon. Next......, the experimental (quasi)universality of the ac conductivity is discussed. It is shown that hopping models are able to reproduce the experimental finding that the response obeys time-temperature superposition, while at the same time a broad range of activation energies is involved in the conduction process. Again...

  1. Thermal conductivity of nanoscale thin nickel films

    Institute of Scientific and Technical Information of China (English)

    YUAN Shiping; JIANG Peixue

    2005-01-01

    The inhomogeneous non-equilibrium molecular dynamics (NEMD) scheme is applied to model phonon heat conduction in thin nickel films. The electronic contribution to the thermal conductivity of the film is deduced from the electrical conductivity through the use of the Wiedemann-Franz law. At the average temperature of T = 300 K, which is lower than the Debye temperature ()D = 450 K,the results show that in a film thickness range of about 1-11 nm, the calculated cross-plane thermal conductivity decreases almost linearly with the decreasing film thickness, exhibiting a remarkable reduction compared with the bulk value. The electrical and thermal conductivities are anisotropic in thin nickel films for the thickness under about 10 nm. The phonon mean free path is estimated and the size effect on the thermal conductivity is attributed to the reduction of the phonon mean free path according to the kinetic theory.

  2. SMi's Conducting Clinical Trials in Europe.

    Science.gov (United States)

    Jago, Charlotte

    2009-12-01

    The Conducting Clinical Trials in Europe meeting, held in London, included topics covering new developments in the field of clinical trials and recommendations on how to best conduct a trial. This conference report highlights selected presentations on the state of affairs of trials in Europe, conducting trials in emerging markets, strategies for improving trials, trial design options, peri-approval and pediatric trials, and the role of key players, such as physicians. Company perspectives from Pfizer Inc and Nycomed are also included.

  3. Anisotropic Thermal Conductivity of Exfoliated Black Phosphorus.

    Science.gov (United States)

    Jang, Hyejin; Wood, Joshua D; Ryder, Christopher R; Hersam, Mark C; Cahill, David G

    2015-12-22

    The anisotropic thermal conductivity of passivated black phosphorus (BP), a reactive two-dimensional material with strong in-plane anisotropy, is ascertained. The room-temperature thermal conductivity for three crystalline axes of exfoliated BP is measured by time-domain thermo-reflectance. The thermal conductivity along the zigzag direction is ≈2.5 times higher than that of the armchair direction.

  4. Electrical Conductivity of Aluminium Alloy Foams

    Institute of Scientific and Technical Information of China (English)

    凤仪; 郑海务; 朱震刚; 祖方遒

    2002-01-01

    Closed-cell aluminium alloy foams were produced using the powder metallurgical technique. The effect of porosityand cell diameter on the electrical conductivity of foams was investigated and the results were compared with anumber of models. It was found that the percolation theory can be successfully applied to describe the dependenceof the electrical conductivity of aluminium alloy foams on the relative density. The cell diameter has a negligibleeffect on the electrical conductivity of foams.

  5. Corrosion Protection of Electrically Conductive Surfaces

    OpenAIRE

    Jian Song; Liangliang Wang; Andre Zibart; Christian Koch

    2012-01-01

    The basic function of the electrically conductive surface of electrical contacts is electrical conduction. The electrical conductivity of contact materials can be largely reduced by corrosion and in order to avoid corrosion, protective coatings must be used. Another phenomenon that leads to increasing contact resistance is fretting corrosion. Fretting corrosion is the degradation mechanism of surface material, which causes increasing contact resistance. Fretting corrosion occurs when there is...

  6. The thermal conductivity of clustered nanocolloids

    Directory of Open Access Journals (Sweden)

    Saba Lotfizadeh

    2014-06-01

    Full Text Available We quantify the effect of clustering on the thermal conductivity of colloidal dispersions using silane-treated silica, a system engineered to exhibit reversible clustering under well-controlled conditions. We show that the thermal conductivity increases monotonically with cluster size and spans the entire range between the two limits of Maxwell's theory. The results, corroborated by numerical simulation, demonstrate that large increases of the thermal conductivity of colloidal dispersions are possible, yet fully within the predictions of classical theory.

  7. Thermal conductivity analysis of lanthanum doped manganites

    Energy Technology Data Exchange (ETDEWEB)

    Mansuri, Irfan, E-mail: dr.irfan.mansuri@gmail.com [Indore Institute of Science and Technology, Pithampur Road Rau, Indore-453331 India and School of Physics, Devi Ahilya University, Khandwa Road Campus, Indore-452001 (India); Shaikh, M. W. [School of Physics, Devi Ahilya University, Khandwa Road Campus, Indore-452001, India and Acropolis Technical Campus, Village Tillore, Indore-453331 (India); Khan, E.; Varshney, Dinesh [School of Physics, Devi Ahilya University, Khandwa Road Campus, Indore-452001 (India)

    2014-04-24

    The temperature-dependent thermal conductivity of the doped manganites La{sub 0.7}Ca{sub 0.3}MnO{sub 3} is theoretically analyzed within the framework of Kubo formulae. The Hamiltonian consists of phonon, electron and magnon thermal conductivity contribution term. In this process we took defects, carrier, grain boundary, scattering process term and then calculate phonon, electron and magnon thermal conductivity.

  8. Skylab Program Illustration

    Science.gov (United States)

    1971-01-01

    This image illustrates major areas of emphasis of the Skylab Program. In an early effort to extend the use of Apollo for further applications, NASA established the Apollo Applications Program (AAP) in August of 1965. The AAP was to include long duration Earth orbital missions during which astronauts would carry out scientific, technological, and engineering experiments in space by utilizing modified Saturn launch vehicles and the Apollo spacecraft. Established in 1970, the Skylab Program was the forerurner of the AAP. The goals of the Skylab were to enrich our scientific knowledge of the Earth, the Sun, the stars, and cosmic space; to study the effects of weightlessness on living organisms, including man; to study the effects of the processing and manufacturing of materials utilizing the absence of gravity; and to conduct Earth resource observations. The Skylab also conducted 19 selected experiments submitted by high school students. Skylab's 3 different 3-man crews spent up to 84 days in Earth orbit. The Marshall Space Flight Center (MSFC) had responsibility for developing and integrating most of the major components of the Skylab: the Orbital Workshop (OWS), Airlock Module (AM), Multiple Docking Adapter (MDA), Apollo Telescope Mount (ATM), Payload Shroud (PS), and most of the experiments. MSFC was also responsible for providing the Saturn IB launch vehicles for three Apollo spacecraft and crews and a Saturn V launch vehicle for the Skylab.

  9. Morphology in electrochemically grown conducting polymer films

    Science.gov (United States)

    Rubinstein, Israel; Gottesfeld, Shimshon; Sabatani, Eyal

    1992-01-01

    A conducting polymer film with an improved space filling is formed on a metal electrode surface. A self-assembling monolayer is formed directly on the metal surface where the monolayer has a first functional group that binds to the metal surface and a second chemical group that forms a chemical bonding site for molecules forming the conducting polymer. The conducting polymer is then conventioonally deposited by electrochemical deposition. In one example, a conducting film of polyaniline is formed on a gold electrode surface with an intermediate monolayer of p-aminothiophenol.

  10. Electrical conductivity of individual polypyrrole microtube

    Institute of Scientific and Technical Information of China (English)

    Long Yun-Ze; Xiao Hong-Mei; Chen Zhao-Jia; Wan Mei-Xiang; Jin Ai-Zi; Gu Chang-Zhi

    2004-01-01

    Conducting microtubes (0.4-0.5μm in outer diameter) made of polypyrrole (PPy) doped with p-toluene sulfonic acid (PTSA) were synthesized by a self-assembly method. We report the electrical conductivity of an individual PPy microtube, on which a pair of platinum micro-leads was fabricated bv focused ion beam deposition. The measured room-temperature conductivity of the individual PPy microtube was 0.29S/cm, which is comparable to that of templatesynthesized PPy micro/nanotubes. The temperature dependence of conductivity of the individual microtube follows the three-dimensional variable-range hopping (3D VRH) model.

  11. Conduction velocity of antigravity muscle action potentials.

    Science.gov (United States)

    Christova, L; Kosarov, D; Christova, P

    1992-01-01

    The conduction velocity of the impulses along the muscle fibers is one of the parameters of the extraterritorial potentials of the motor units allowing for the evaluation of the functional state of the muscles. There are no data about the conduction velocities of antigravity muscleaction potentials. In this paper we offer a method for measuring conduction velocity of potentials of single MUs and the averaged potentials of the interference electromiogram (IEMG) lead-off by surface electrodes from mm. sternocleidomastoideus, trapezius, deltoideus (caput laterale) and vastus medialis. The measured mean values of the conduction velocity of antigravity muscles potentials can be used for testing the functional state of the muscles.

  12. Thermal conductivity of different colored compomers.

    Science.gov (United States)

    Guler, Cigdem; Keles, Ali; Guler, Mehmet S; Karagoz, Sendogan; Cora, Ömer N; Keskin, Gul

    2017-06-15

    Compomers are mostly used in primary dentition. The thermal conductivity properties of traditional or colored compomers have not been investigated in detail so far. The aim of this in vitro study was to assess and compare the thermal conductivities of traditional and colored compomers. Two sets of compomers - namely, Twinky Star (available in berry, lemon, green, silver, blue, pink, gold and orange shades) and Dyract Extra (available in B1, A3 and A2 shades) - were included in this study. All of the traditional and colored compomers were applied to standard molds and polymerized according to the manufacturers' instructions. Three samples were prepared from each compomer. Measurements were conducted using a heat conduction test setup, and the coefficient of heat conductivity was calculated for each material. The heat conductivity coefficients were statistically analyzed using Kruskal-Wallis and Duncan tests. Uncertainty analysis was also performed on the calculated coefficients of heat conductivity. Statistically significant differences were found (p<0.05) between the thermal conductivity properties of the traditional and colored compomers examined. Among all of the tested compomers, the silver shade compomer exhibited the highest coefficient of heat conductivity (p<0.05), while the berry shade exhibited the lowest coefficient (p<0.05). Uncertainty analyses revealed that 6 out of 11 samples showed significant differences. The silver shade compomer should be avoided in deep cavities. The material properties could be improved for colored compomers.

  13. Dynamic conductance of a ballistic quantum wire

    Energy Technology Data Exchange (ETDEWEB)

    Quan Jun [School of Physics Science and Technology, Zhanjiang Normal University, Zhanjiang 524048 (China); Tian Ying [Center of Liberal Education, Zhanjiang Normal University, Zhanjiang 524048 (China); Zhang, Jun, E-mail: ntu_submit@yahoo.c [School of Physics Science and Technology, Zhanjiang Normal University, Zhanjiang 524048 (China); Shenzhen Institute of Advanced Integration Technology, Shenzhen 518055 (China); Shao Lexi [School of Physics Science and Technology, Zhanjiang Normal University, Zhanjiang 524048 (China)

    2011-04-01

    Within the framework of exact linear response theory, we derive a general formula, with which the dynamic conductance of mesoscopic system can be determined in the absence of Coulomb interaction. In addition, we present a solution to the problem of current partition in the system. These allow the derivation of dynamic conductance in time-dependent case. As a natural consequence, the current (charge) conservation and gauge invariance conditions are fulfilled. To give an example, we discuss the dynamic conductance of a ballistic quantum wire, and the effect of contacts on the conductance is also discussed.

  14. The NASA Space Biology Program

    Science.gov (United States)

    Halstead, T. W.

    1982-01-01

    A discussion is presented of the research conducted under the auspices of the NASA Space Biology Program. The objectives of this Program include the determination of how gravity affects and how it has shaped life on earth, the use of gravity as a tool to investigate relevant biological questions, and obtaining an understanding of how near-weightlessness affects both plants and animals in order to enhance the capability to use and explore space. Several areas of current developmental research are discussed and the future focus of the Program is considered.

  15. Integer programming

    CERN Document Server

    Conforti, Michele; Zambelli, Giacomo

    2014-01-01

    This book is an elegant and rigorous presentation of integer programming, exposing the subject’s mathematical depth and broad applicability. Special attention is given to the theory behind the algorithms used in state-of-the-art solvers. An abundance of concrete examples and exercises of both theoretical and real-world interest explore the wide range of applications and ramifications of the theory. Each chapter is accompanied by an expertly informed guide to the literature and special topics, rounding out the reader’s understanding and serving as a gateway to deeper study. Key topics include: formulations polyhedral theory cutting planes decomposition enumeration semidefinite relaxations Written by renowned experts in integer programming and combinatorial optimization, Integer Programming is destined to become an essential text in the field.

  16. Exploring Pair Programming Benefits for MIS Majors

    Directory of Open Access Journals (Sweden)

    April H. Reed

    2016-12-01

    Full Text Available Pair programming is a collaborative programming practice that places participants in dyads, working in tandem at one computer to complete programming assignments. Pair programming studies with Computer Science (CS and Software Engineering (SE majors have identified benefits such as technical productivity, program/design quality, academic performance, and increased satisfaction for their participants. In this paper, pair programming is studied with Management Information Systems (MIS majors, who (unlike CS and SE majors taking several programming courses typically take only one programming course and often struggle to develop advanced programming skills within that single course. The researchers conducted two pair programming experiments in an introductory software development course for MIS majors over three semesters to determine if pair programming could enhance learning for MIS students. The program results, researchers’ direct observations, and participants’ responses to a survey questionnaire were analyzed after each experiment. The results indicate that pair programming appears to be beneficial to MIS students’ technical productivity and program design quality, specifically the ability to create programs using high-level concepts. Additionally, results confirmed increased student satisfaction and reduced frustration, as the pairs worked collaboratively to produce a program while actively communicating and enjoying the process.

  17. Ostomy Home Skills Program

    Medline Plus

    Full Text Available ... Safety Conference Registry Login SCR Training and Testing Cancer Cancer Programs Cancer Programs Overview of Cancer Programs Cancer Programs News American Joint Committee on ...

  18. Programming Algol

    CERN Document Server

    Malcolme-Lawes, D J

    2014-01-01

    Programming - ALGOL describes the basics of computer programming using Algol. Commands that could be added to Algol and could increase its scope are described, including multiplication and division and the use of brackets. The idea of labeling or naming a command is also explained, along with a command allowing two alternative results. Most of the important features of Algol syntax are discussed, and examples of compound statements (that is, sets of commands enclosed by a begin ... end command) are given.Comprised of 11 chapters, this book begins with an introduction to the digital computer an

  19. Programming Interactivity

    CERN Document Server

    Noble, Joshua

    2012-01-01

    Ready to create rich interactive experiences with your artwork, designs, or prototypes? This is the ideal place to start. With this hands-on guide, you'll explore several themes in interactive art and design-including 3D graphics, sound, physical interaction, computer vision, and geolocation-and learn the basic programming and electronics concepts you need to implement them. No previous experience is necessary. You'll get a complete introduction to three free tools created specifically for artists and designers: the Processing programming language, the Arduino microcontroller, and the openFr

  20. Conducting network penetration and espionage in a global environment

    CERN Document Server

    Middleton, Bruce

    2014-01-01

    When it's all said and done, penetration testing remains the most effective way to identify security vulnerabilities in computer networks. Conducting Network Penetration and Espionage in a Global Environment provides detailed guidance on how to perform effective penetration testing of computer networks-using free, open source, and commercially available tools, including Backtrack, Metasploit, Wireshark, Nmap, Netcat, and Nessus. It also considers exploits and other programs using Python, PERL, BASH, PHP, Ruby, and Windows PowerShell.The book taps into Bruce Middleton's decades of experience wi

  1. Measurement of ionic conductivity in mixed conducting compounds using solid electrolyte microcontacts

    NARCIS (Netherlands)

    Zipprich, W.M.; Wiemhöfer, H.D.

    2000-01-01

    Ion conducting (=electron blocking) microelectrodes were used to measure the oxygen ion conductivity in mixed conducting oxides as a function of the thermodynamic activity of oxygen. The reported data concern mixed conducting perovskites of the composition La0.8E0.2CoO3 with E=Mg, Ca, Sr. The

  2. 75 FR 78915 - Conduct on Postal Property

    Science.gov (United States)

    2010-12-17

    ... From the Federal Register Online via the Government Publishing Office POSTAL SERVICE 39 CFR Part 232 Conduct on Postal Property AGENCY: Postal Service. ACTION: Final rule. SUMMARY: The U.S. Postal...-3484. SUPPLEMENTARY INFORMATION: The current rules governing Conduct on Postal Property contain a...

  3. Effective Thermal Conductivity of Adsorbent Packed Beds

    Science.gov (United States)

    Mori, Hideo; Hamamoto, Yoshinori; Yoshida, Suguru

    The effective thermal conductivity of adsorbent packed beds of granular zeolite 13X and granular silica gel A in the presence of stagnant steam or air was measured under different conditions of the adsorbent bed temperature, particle size and filler-gas pressure. The measured effective thermal conductivity showed to become smaller with decreasing particle size or decreasing pressure, but it was nearly independent of the bed temperature. When steam was the filler-gas, the rise in the thermal conductivity of the adsorbent particles due to steam adsorption led to the increase in the effective thermal conductivity of the bed, and this effect was not negligible at high steam pressure for the bed of large particle size. It was found that both the predictions of the effective thermal conductivity by the Hayashi et al.'s model and the Bauer-Schlünder model generally agreed well with the measurements, by considering the particle thermal conductivity rise due to steam adsorption. The thermal conductivity of a consolidated bed of granular zeolite 13X was also measured, and it was found to be much larger than that of the packed bed especially at lower pressure. The above prediction models underestimated the effective thermal conductivity of the consolidated bed.

  4. Conductive elastomers by a new latex process

    Science.gov (United States)

    Electrically conductive polymers such as polyaniline can be used to in production of light-emitting diodes, printed circuit board components, antistatic materials, etc. Highly filled elastomers, such as those filled with metallic powders, can also conduct electricity. However, limitations due to co...

  5. 47 CFR 18.307 - Conduction limits.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Conduction limits. 18.307 Section 18.307... Standards § 18.307 Conduction limits. For the following equipment, when designed to be connected to the... on any frequency or frequencies shall not exceed the limits in the following tables. Compliance...

  6. 47 CFR 15.207 - Conducted limits.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Conducted limits. 15.207 Section 15.207... Conducted limits. (a) Except as shown in paragraphs (b) and (c) of this section, for an intentional radiator... to 30 MHz, shall not exceed the limits in the following table, as measured using a 50 μH/50 ohms...

  7. 47 CFR 15.315 - Conducted limits.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Conducted limits. 15.315 Section 15.315... Communications Service Devices § 15.315 Conducted limits. An unlicensed PCS device that is designed to be connected to the public utility (AC) power line must meet the limits specified in § 15.207....

  8. 47 CFR 15.107 - Conducted limits.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Conducted limits. 15.107 Section 15.107... Conducted limits. (a) Except for Class A digital devices, for equipment that is designed to be connected to... power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed the...

  9. Thermal conductivity of unsaturated clay-rocks

    Directory of Open Access Journals (Sweden)

    D. Jougnot

    2010-01-01

    Full Text Available The parameters used to describe the electrical conductivity of a porous material can be used to describe also its thermal conductivity. A new relationship is developed to connect the thermal conductivity of an unsaturated porous material to the thermal conductivity of the different phases of the composite, and two electrical parameters called the first and second Archie's exponents. A good agreement is obtained between the new model and thermal conductivity measurements performed using packs of glass beads and core samples of the Callovo-Oxfordian clay-rocks at different saturations of the water phase. We showed that the three model parameters optimised to fit the new model against experimental data (namely the thermal conductivity of the solid phase and the two Archie's exponents are consistent with independent estimates. We also observed that the anisotropy of the effective thermal conductivity of the Callovo-Oxfordian clay-rock was mainly due to the anisotropy of the thermal conductivity of the solid phase.

  10. 12 CFR 368.3 - Business conduct.

    Science.gov (United States)

    2010-01-01

    ... Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY GOVERNMENT SECURITIES SALES PRACTICES § 368.3 Business conduct. A bank that is a government securities broker or dealer... conduct of its business as a government securities broker or dealer....

  11. Suboccipital neuropathy after bone conduction device placement

    NARCIS (Netherlands)

    Faber, H.T.; Ru, J.A. de

    2013-01-01

    OBJECTIVE: To describe the clinical characteristics of a 70-year-old female with occipital neuropathy following bone conduction device surgery. DESCRIPTION: A 65-year-old woman underwent bone conduction device placement surgery on the left temporal bone. Postoperatively she progressively developed c

  12. Conductivity of single-walled carbon nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Gets, A. V.; Krainov, V. P., E-mail: vpkrainov@mail.ru [Moscow Institute of Physics and Technology (Russian Federation)

    2016-12-15

    The conductivity of single-walled carbon nanotubes at low temperatures is calculated. It is shown that it is much higher than the well-known conductivity of a model 1D Fermi system. This is a purely quantum-mechanical effect.

  13. Conductance of AFM Deformed Carbon Nanotubes

    Science.gov (United States)

    Svizhenko, Alexei; Maiti, Amitesh; Anatram, M. P.; Biegel, Bryan (Technical Monitor)

    2002-01-01

    This viewgraph presentation provides information on the electrical conductivity of carbon nanotubes upon deformation by atomic force microscopy (AFM). The density of states and conductance were computed using four orbital tight-binding method with various parameterizations. Different chiralities develop bandgap that varies with chirality.

  14. Discotic liquid crystals: from dynamics to conductivity

    NARCIS (Netherlands)

    Kruglova, O.V.

    2007-01-01

    The dynamics and conductivity of the discotic liquid-crystal, hexakis(n-hexylox) triphenylene (HAT6), and charge-transfer complex that it forms with 2,4,7trinitro-9-fluorenone (TNF) are studied using quasielastic neutron-scattering (QENS) and Pulse-Radiolysis Time resolved Conductivity. These two te

  15. 47 CFR 97.511 - Examinee conduct.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Examinee conduct. 97.511 Section 97.511 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES AMATEUR RADIO SERVICE Qualifying Examination Systems § 97.511 Examinee conduct. Each examinee must comply with the...

  16. 5 CFR 359.403 - Removal: Conduct.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Removal: Conduct. 359.403 Section 359.403 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS REMOVAL FROM THE SENIOR... Probation § 359.403 Removal: Conduct. (a) Coverage. (1) This section covers the removal of a career...

  17. 17 CFR 31.5 - Unlawful conduct.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Unlawful conduct. 31.5 Section 31.5 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION LEVERAGE TRANSACTIONS § 31.5 Unlawful conduct. (a) On and after April 13, 1984, it shall be unlawful for any person: (1) To...

  18. 36 CFR 261.4 - Disorderly conduct.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Disorderly conduct. 261.4 Section 261.4 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE PROHIBITIONS General Prohibitions § 261.4 Disorderly conduct. The following are prohibited: (a) Engaging in fighting...

  19. Conduct Systems Designed to Promote Moral Learning

    Science.gov (United States)

    Lancaster, James M.

    2012-01-01

    Historically, those responsible for administration of student conduct resolution in U.S. higher education have sought some manner of moral development for students, whether labeled as such or not. It is clear that contemporary conduct officers are more deeply concerned with such student development as an extension of their practice. Many such…

  20. Terahertz Conductivity of Single Walled Nanotube Films

    Institute of Scientific and Technical Information of China (English)

    韩家广; 朱志远; 何峰; 廖怡; 王震遐; 张伟; 余礼平; 孙立涛; 王庭太

    2003-01-01

    The conductivity of single walled nanotube films is investigated with a combination of the Maxwel1-Garnett (MG)model and the Drude-Lorentzian (DL) model in the Terahertz region. A theoretical fit for Jeon's experiment is given and a decrease of the real conductivity with increasing frequency is predicted. Meanwhile, the MG and DL models are also discussed for different samples.

  1. Ultrabroadband terahertz conductivity of Si nanocrystal films

    DEFF Research Database (Denmark)

    Cooke, D. G.; Meldrum, A.; Jepsen, P. Uhd

    2012-01-01

    The terahertz conductivity of silicon nanoparticles embedded in glass with varying density is studied with ultra-broadband terahertz spectroscopy on picosecond time scales following fs optical excitation. The transition from relatively isolated charge carriers to densities which allow inter...... the applicability of this simple model to the conductivity of nanoparticle ensembles over the entire THz spectral window....

  2. Crystal fields and conduction electrons in praseodymium

    DEFF Research Database (Denmark)

    Clausen, K.N.; Aagaard Sørensen, S.; McEwen, K.A.

    1995-01-01

    The interactions between the crystal-field excitations, the phonons and the conduction electrons in Pr have been studied further. The low-energy satellites to the crystal-field excitations, which are believed to be associated with propagating paramagnon modes in the conduction-electron gas, appear...

  3. A universal thermal conductance of charge carriers

    Energy Technology Data Exchange (ETDEWEB)

    Greiner, A.; Reggiani, L. [Lecce, Univ. (Italy). Ist. Nazionale di Fisica della Materia. Dipt. di Scienza dei Materiali; Kuhn, T. [Munster, Westfalische Wilhelms-Univ. (Germany). Inst. fur Theoretische Physik II; Varani, L. [Montpellier, Univ. Montpellier II (France). Centre d`Electronique et de Micro-optoelectronique

    1996-12-01

    A universal thermal conductance of charge carriers K = 2{pi}{sup 2}k{sub B}{sup 2}T / (3h) is rigorously derived within a correlation-function formalism. Similar to the case of the universal electrical conductance G = 2e{sup 2} / h this result pertains to one-dimensional, ballistic, and degenerate conditions for non-interacting particles.

  4. Conductive Education in a New Context.

    Science.gov (United States)

    Lambert, Mike

    1992-01-01

    This article describes the development of the Birmingham Institute for Conductive Education in England; its work with students who have motor disorders; its collaborative work with the Peto Institute in Budapest, Hungary; the compatibility of conductive education and England's National Curriculum; and differences between Hungarian and British…

  5. Conductivity studies on microwave synthesized glasses

    Indian Academy of Sciences (India)

    Asha Rajiv; M Sudhakara Reddy; R Viswanatha; Jayagopal Uchil; C Narayana Reddy

    2015-08-01

    Conductivity measurements have been made on 2O5 − (100 − ) [0.5 Na2O + 0.5 B2O3] (where 10 ≤ ≤ 50) glasses prepared by using microwave method. DC conductivity () measurements exhibit temperature-and compositional-dependent trends. It has been found that conductivity in these glasses changes from the predominantly ‘ionic’ to predominantly ‘electronic’ depending upon the chemical composition. The dc conductivity passes through a deep minimum, which is attributed to network disruption. Also, this nonlinear variation in dc and activation energy can be interpreted using ion–polaron correlation effect. Electron paramagnetic resonance (EPR) and impedance spectroscopic techniques have been used to elucidate the nature of conduction mechanism. The EPR spectra reveals, in least modified (25 Na2O mol%) glasses, conduction is due to the transfer of electrons via aliovalent vanadium sites, while in highly modified (45 Na2O mol%) glasses Na+ ion transport dominates the electrical conduction. For highly modified glasses, frequency-dependent conductivity has been analysed using electrical modulus formalism and the observations have been discussed.

  6. Anisotropic thermal conductivity in uranium dioxide.

    Science.gov (United States)

    Gofryk, K; Du, S; Stanek, C R; Lashley, J C; Liu, X-Y; Schulze, R K; Smith, J L; Safarik, D J; Byler, D D; McClellan, K J; Uberuaga, B P; Scott, B L; Andersson, D A

    2014-08-01

    The thermal conductivity of uranium dioxide has been studied for over half a century, as uranium dioxide is the fuel used in a majority of operating nuclear reactors and thermal conductivity controls the conversion of heat produced by fission events to electricity. Because uranium dioxide is a cubic compound and thermal conductivity is a second-rank tensor, it has always been assumed to be isotropic. We report thermal conductivity measurements on oriented uranium dioxide single crystals that show anisotropy from 4 K to above 300 K. Our results indicate that phonon-spin scattering is important for understanding the general thermal conductivity behaviour, and also explains the anisotropy by coupling to the applied temperature gradient and breaking cubic symmetry.

  7. Study on conductance of supersaturated chloride microdroplets

    Institute of Scientific and Technical Information of China (English)

    HE KeJuan; CHENG Hua; ZHU YanYing; WANG LiangYu; ZHANG YunHong

    2009-01-01

    By using the measuring system previously designed by the authors,the conductance of KCI,NaCl and NH4Cl microdroplets is obtained in the whole measuring RH range,especially in the supersaturation region,which cannot be acquired from the bulk solutions and fills the gap of lack of experimental data of conductance under the supersaturated state.The ERH and DRH of these three kinds of microdroplets observed from a microscope are 80.5% and 95.4% (KCI),75.7% and 93.3% (NaCl),and 69.9% and 96.6% (NH4Cl),respectively.In addition,it can be found from the dependence of conductance on RH that conductance is very sensitive to the existence of water molecules inside the microdroplet and the threshold of the deliquescence process can be predicted by the variation of conductance.

  8. Study on conductance of supersaturated chloride microdroplets

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    By using the measuring system previously designed by the authors, the conductance of KCl, NaCl and NH4Cl microdroplets is obtained in the whole measuring RH range, especially in the supersaturation region, which cannot be acquired from the bulk solutions and fills the gap of lack of experimental data of conductance under the supersaturated state. The ERH and DRH of these three kinds of microdroplets observed from a microscope are 80.5% and 95.4% (KCl), 75.7% and 93.3% (NaCl), and 69.9% and 96.6% (NH4Cl), respectively. In addition, it can be found from the dependence of conductance on RH that conductance is very sensitive to the existence of water molecules inside the microdroplet and the threshold of the deliquescence process can be predicted by the variation of conductance.

  9. Hydraulic conductivity of GCLs in MSW landfills

    Institute of Scientific and Technical Information of China (English)

    LI Guo-cheng; YANG Wu-chao; DAN Tang-hui

    2008-01-01

    The state of the art of the study on the hydraulic conductivity of GCLs is presented in terms of the in-fluence of the effective stress, chemical interactions, freeze - thaw cycles and temperature gradients. The chan-ges of void ratio caused by changes of effective stress have a direct linear effect on the hydraulic conductivity, regardless of the cation concentration or the thickness of the adsorbed layer. The hydraulic conductivity is relat-ed to the relative abundance of monovalent and divalent cation(RMD), and RMD has a great effect on the hy-draulic conductivity in weak solution. The long-term susceptibility of GCLs to increased hydraulic conductivity as a response to repeated freeze-thaw cycling is minimal, which has been proved after 150 freeze-thaw cycles. The potential of desiccation cracking increases with the increasing temperature gradient and is related to the ini-tial subsoil water content, the applied overburden stress, etc.

  10. Pore size matters for potassium channel conductance

    Science.gov (United States)

    Moldenhauer, Hans; Pincuntureo, Matías

    2016-01-01

    Ion channels are membrane proteins that mediate efficient ion transport across the hydrophobic core of cell membranes, an unlikely process in their absence. K+ channels discriminate K+ over cations with similar radii with extraordinary selectivity and display a wide diversity of ion transport rates, covering differences of two orders of magnitude in unitary conductance. The pore domains of large- and small-conductance K+ channels share a general architectural design comprising a conserved narrow selectivity filter, which forms intimate interactions with permeant ions, flanked by two wider vestibules toward the internal and external openings. In large-conductance K+ channels, the inner vestibule is wide, whereas in small-conductance channels it is narrow. Here we raise the idea that the physical dimensions of the hydrophobic internal vestibule limit ion transport in K+ channels, accounting for their diversity in unitary conductance. PMID:27619418

  11. Proton conducting ceramic membranes for hydrogen separation

    Science.gov (United States)

    Elangovan, S [South Jordan, UT; Nair, Balakrishnan G [Sandy, UT; Small, Troy [Midvale, UT; Heck, Brian [Salt Lake City, UT

    2011-09-06

    A multi-phase proton conducting material comprising a proton-conducting ceramic phase and a stabilizing ceramic phase. Under the presence of a partial pressure gradient of hydrogen across the membrane or under the influence of an electrical potential, a membrane fabricated with this material selectively transports hydrogen ions through the proton conducting phase, which results in ultrahigh purity hydrogen permeation through the membrane. The stabilizing ceramic phase may be substantially structurally and chemically identical to at least one product of a reaction between the proton conducting phase and at least one expected gas under operating conditions of a membrane fabricated using the material. In a barium cerate-based proton conducting membrane, one stabilizing phase is ceria.

  12. Iterative Precise Conductivity Measurement with IDEs.

    Science.gov (United States)

    Hubálek, Jaromír

    2015-05-22

    The paper presents a new approach in the field of precise electrolytic conductivity measurements with planar thin- and thick-film electrodes. This novel measuring method was developed for measurement with comb-like electrodes called interdigitated electrodes (IDEs). Correction characteristics over a wide range of specific conductivities were determined from an interface impedance characterization of the thick-film IDEs. The local maximum of the capacitive part of the interface impedance is used for corrections to get linear responses. The measuring frequency was determined at a wide range of measured conductivity. An iteration mode of measurements was suggested to precisely measure the conductivity at the right frequency in order to achieve a highly accurate response. The method takes precise conductivity measurements in concentration ranges from 10(-6) to 1 M without electrode cell replacement.

  13. Homogenized thermal conduction model for particulate foods

    Energy Technology Data Exchange (ETDEWEB)

    Chinesta, Francisco [Laboratoire de mecanique des systemes et des procedes, Ecole nationale superieure d' arts et metiers, 151 boulevard de l' Hopital, 75013, Paris (France); Torres, Rafael [Departamento de Ingenieria Mecanica, Universidad Politecnica de Valencia, Camino de Vera s/n. 46071, Valencia (Spain); Ramon, Antonio [AIMPLAS, Gustave Eiffel 4, 46980 Paterna, Valencia (Spain); Rodrigo, Mari Carmen; Rodrigo, Miguel [Instituto de Agroquimica y Tecnologia de Alimentos, Consejo Superior de Investigaciones Cientificas, Apartado de correos 73, 46100, Burjasot (Spain)

    2002-12-01

    This paper deals with the definition of an equivalent thermal conductivity for particulate foods. An homogenized thermal model is used to asses the effect of particulate spatial distribution and differences in thermal conductivities. We prove that the spatial average of the conductivity can be used in an homogenized heat transfer model if the conductivity differences among the food components are not very large, usually the highest conductivity ratio between the foods components is lower than 5. In the general case we propose to use a standard spatial homogenization procedure. Although the heterogeneity give rise to an anisotropic heat transfer behaviour, this effect is negligible when the food particles are randomly distributed. When we use pre-mixed particulate foods a statistical average can be defined from a small number of possible particle arrangements. (authors)

  14. Biochemical synthesis of water soluble conducting polymers

    Science.gov (United States)

    Bruno, Ferdinando F.; Bernabei, Manuele

    2016-05-01

    An efficient biomimetic route for the synthesis of conducting polymers/copolymers complexed with lignin sulfonate and sodium (polystyrenesulfonate) (SPS) will be presented. This polyelectrolyte assisted PEG-hematin or horseradish peroxidase catalyzed polymerization of pyrrole (PYR), 3,4 ethyldioxithiophene (EDOT) and aniline has provided a route to synthesize water-soluble conducting polymers/copolymers under acidic conditions. The UV-vis, FTIR, conductivity and cyclic voltammetry studies for the polymers/copolymer complex indicated the presence of a thermally stable and electroactive polymers. Moreover, the use of water-soluble templates, used as well as dopants, provided a unique combination of properties such as high electronic conductivity, and processability. These polymers/copolymers are nowadays tested/evaluated for antirust features on airplanes and helicopters. However, other electronic applications, such as photovoltaics, for transparent conductive polyaniline, actuators, for polypyrrole, and antistatic films, for polyEDOT, will be proposed.

  15. Low lattice thermal conductivity of stanene.

    Science.gov (United States)

    Peng, Bo; Zhang, Hao; Shao, Hezhu; Xu, Yuchen; Zhang, Xiangchao; Zhu, Heyuan

    2016-02-03

    A fundamental understanding of phonon transport in stanene is crucial to predict the thermal performance in potential stanene-based devices. By combining first-principle calculation and phonon Boltzmann transport equation, we obtain the lattice thermal conductivity of stanene. A much lower thermal conductivity (11.6 W/mK) is observed in stanene, which indicates higher thermoelectric efficiency over other 2D materials. The contributions of acoustic and optical phonons to the lattice thermal conductivity are evaluated. Detailed analysis of phase space for three-phonon processes shows that phonon scattering channels LA + LA/TA/ZA ↔ TA/ZA are restricted, leading to the dominant contributions of high-group-velocity LA phonons to the thermal conductivity. The size dependence of thermal conductivity is investigated as well for the purpose of the design of thermoelectric nanostructures.

  16. Universality of ac conduction in disordered solids

    DEFF Research Database (Denmark)

    Dyre, Jeppe; Schrøder, Thomas

    2000-01-01

    The striking similarity of ac conduction in quite different disordered solids is discussed in terms of experimental results, modeling, and computer simulations. After giving an overview of experiment, a macroscopic and a microscopic model are reviewed. For both models the normalized ac conductivity...... as a function of a suitably scaled frequency becomes independent of details of the disorder in the extreme disorder limit, i.e., when the local randomly varying mobilities cover many orders of magnitude. The two universal ac conductivities are similar, but not identical; both are examples of unusual non......-power-law universalities. It is argued that ac universality reflects an underlying percolation determining dc as well as ac conductivity in the extreme disorder limit. Three analytical approximations to the universal ac conductivities are presented and compared to computer simulations. Finally, model predictions...

  17. Modeling of ion conductivity in Nafion membranes

    Institute of Scientific and Technical Information of China (English)

    YANG Zhen; PENG Xiaofeng; WANG Buxuan; LEE Duujong; DUAN Yuanyuan

    2007-01-01

    A theoretical investigation was conducted to describe the ion transport behavior in a Nafion Membrane of proton exchange membrane fuel cells (PEMFC).By analyzing the surface energy configuration of the ionic clusters in a Nafion membrane,an equivalent field intensity,Ee,was introduced to facilitate the analysis of surface resistance against ion conduction in the central region of clusters.An expression was derived for ionic conductivity incorporating the influence of surface resistance.A face-centered cubic (FCC)lattice model for a spatial cluster distribution was used to modify the effect of water content on ionic conductivity in the polymeric matrix,i.e.,the regions between clusters.Compared with the available empirical correlations,the new expression showed much better agreement with the available experimental results,which indicates the rationality to consider the structural influence on ion conduction in water-swollen Nation membranes.

  18. Origins of variation in conducted vasomotor responses

    DEFF Research Database (Denmark)

    Hald, Bjørn Olav; Welsh, Donald G.; Holstein-Rathlou, Niels-Henrik

    2015-01-01

    efficiency-notably depolarization or radial currents reduce electrical spread. Random cell-cell variation, ubiquitous in biological systems, only cause small or no reduction in conduction efficiency. Collectively, our simulations can explain why CVRs from hyperpolarizing stimuli tend to conduct longer than...... variation. Using a computational approach that allows for introduction of structural and electrophysiological heterogeneity, we systematically tested variations in both arteriolar electrophysiology and modes of stimuli. Within the same vessel, our simulations show that conduction efficacy is influenced...... by the type of cell being stimulated and, in case of depolarization, by the stimulation strength. Particularly, simultaneous stimulation of both endothelial and vascular smooth muscle cells augments conduction. Between vessels, the specific electrophysiology determines membrane resistance and conduction...

  19. Biochemical synthesis of water soluble conducting polymers

    Energy Technology Data Exchange (ETDEWEB)

    Bruno, Ferdinando F., E-mail: Ferdinando-Bruno@uml.edu [US Army Natick Soldier Research, Development and Engineering Center, Natick, MA 01760 (United States); Bernabei, Manuele [ITAF, Test Flight Centre, Chemistry Dept. Pratica di Mare AFB, 00071 Pomezia (Rome), Italy (UE) (Italy)

    2016-05-18

    An efficient biomimetic route for the synthesis of conducting polymers/copolymers complexed with lignin sulfonate and sodium (polystyrenesulfonate) (SPS) will be presented. This polyelectrolyte assisted PEG-hematin or horseradish peroxidase catalyzed polymerization of pyrrole (PYR), 3,4 ethyldioxithiophene (EDOT) and aniline has provided a route to synthesize water-soluble conducting polymers/copolymers under acidic conditions. The UV-vis, FTIR, conductivity and cyclic voltammetry studies for the polymers/copolymer complex indicated the presence of a thermally stable and electroactive polymers. Moreover, the use of water-soluble templates, used as well as dopants, provided a unique combination of properties such as high electronic conductivity, and processability. These polymers/copolymers are nowadays tested/evaluated for antirust features on airplanes and helicopters. However, other electronic applications, such as photovoltaics, for transparent conductive polyaniline, actuators, for polypyrrole, and antistatic films, for polyEDOT, will be proposed.

  20. The Organic Chemistry of Conducting Polymers

    Energy Technology Data Exchange (ETDEWEB)

    Tolbert, Laren Malcolm [Georgia Inst. of Technology, Atlanta, GA (United States)

    2014-12-01

    For the last several years, we have examined the fundamental principles of conduction in one-dimensional systems, i.e., molecular “wires”. It is, of course, widely recognized that such systems, as components of electronically conductive materials, function in a two- and three-dimensional milieu. Thus interchain hopping and grain-boundary resistivity are limiting conductivity factors in highly conductive materials, and overall conductivity is a function of through-chain and boundary hopping. We have given considerable attention to the basic principles underlying charge transport (the “rules of the game”) in two-dimensional systems by using model systems which allow direct observation of such processes, including the examination of tunneling and hopping as components of charge transfer. In related work, we have spent considerable effort on the chemistry of conjugated heteropolymers, most especially polythiophens, with the aim of using these most efficient of readily available electroactive polymers in photovoltaic devices.

  1. Financial Education Program Evaluation

    Directory of Open Access Journals (Sweden)

    Diana Burk

    2014-02-01

    Full Text Available This study illustrates the process of program evaluation using a logic model. Guided by the Transtheoretical Model of Change and a logic model, this study evaluated the effectiveness of a Retirement and Savings Seminar by measuring participant (n = 54 satisfaction, financial knowledge, financial confidence, and financial behavior change compared to a similar group of 134 non-participants. Participants were very satisfied with the seminar. Their financial knowledge and confidence scores significantly increased from pretest to posttest. Financial knowledge and confidence scores improved more than the comparison group while controlling for group differences in age, income, and pretest scores. Two months later, participants were more likely than the comparison group to have adopted positive financial behaviors as measured by the Financial Preparedness for Retirement Scale. Financial educators can use this study as a model for planning, conducting, and evaluating their programs.

  2. Utility of the Living (Well Through) Intergenerational Fitness and Exercise Program as a County-Delivered Extension Program

    Science.gov (United States)

    Sowle, Ashleigh J.; Francis, Sarah L.; Margrett, Jennifer A.; Franke, Warren D.

    2016-01-01

    Rural-residing older adults are not participating in regular physical activity. Extension is in an excellent position to fill this programming void through transdisciplinary programming such as the Living (well through) Intergenerational Fitness and Exercise (LIFE) program. Qualitative evaluation was conducted to assess the LIFE program's utility…

  3. ORGEL program

    Energy Technology Data Exchange (ETDEWEB)

    none

    1963-09-01

    Parameter optimization studies for an ORGEL power plant are reported, and the ESSOR test reactor used in the program is described. Research at Ispra in reactor physics, technology, metallurgy, heat transfer, chemistry, and physical chemistry associated with ORGEL development is also summarized. (D.C.W.)

  4. Shoreline monitoring programs for oil spills-of-opportunity

    National Research Council Canada - National Science Library

    Harper, J.R; Owens, E.H

    1985-01-01

    This report outlines procedures for conducting shoreline monitoring programs of opportunity for accidental oil spills, the procedures outlined apply to documentation of oil contamination levels only...

  5. 45 CFR 1706.150 - Program accessibility: Existing facilities.

    Science.gov (United States)

    2010-10-01

    ... COMMISSION ON LIBRARIES AND INFORMATION SCIENCE ENFORCEMENT OF NONDISCRIMINATION ON THE BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES CONDUCTED BY NATIONAL COMMISSION ON LIBRARIES AND INFORMATION SCIENCE §...

  6. 45 CFR 1706.149 - Program accessibility: Discrimination prohibited.

    Science.gov (United States)

    2010-10-01

    ... COMMISSION ON LIBRARIES AND INFORMATION SCIENCE ENFORCEMENT OF NONDISCRIMINATION ON THE BASIS OF HANDICAP IN PROGRAMS OR ACTIVITIES CONDUCTED BY NATIONAL COMMISSION ON LIBRARIES AND INFORMATION SCIENCE §...

  7. Instrumentation Technical Program Management Team: FY-1987 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Hanson, M.L.; Englert, G.L.; Grametbauer, G.L.

    1988-04-14

    This report contains evaluations of process, environmental, health, and safety instrumentation of gaseous diffusion plants. The study was conducted by the instrumentation technical program management team. (LSP)

  8. Fatality Assessment and Control Evaluation (FACE) Program

    Data.gov (United States)

    U.S. Department of Health & Human Services — Each day, between 12 to 13 U.S. workers die as a result of a traumatic injury on the job. Investigations conducted through the FACE program allow the identification...

  9. training program in Jimma University

    African Journals Online (AJOL)

    of the new pre service teachers training program in Ethiopia. The study was conducted ... in social. Vol. 2 No. 2 March 2007 64 major problem facing the nation as it sought to implement the .... affect the time budget of learners and administers. '.

  10. Quality Assurance Program. QAP Workbook.

    Science.gov (United States)

    Pelavin Research Inst., Washington, DC.

    The Quality Assurance Program (QAP) workbook is intended to assist institutions of higher education conduct qualitative and quantitative evaluations of their financial aid operations in relation to requirements of Title IV of the Higher Education Act. The workbook provides a structured approach for incorporating a cyclical Title IV QA system into…

  11. Introduction to International NPOCE Program

    Institute of Scientific and Technical Information of China (English)

    WANG Fan; HU Dunxin

    2010-01-01

    @@ "Northwestern Pacific Ocean Circulation and Climate Experiment(NPOCE)"was recently endorsed by Climate Variability and Predictability(CLIVAR)as an international joint program,which provides framework for 19 institutions from 8countries so far including Australia,China,Germany,Indonesia,Japan,Korea,Philippines and United States to conduct cooperative field experiment and joint studies in the northwestern Pacific(NWP).

  12. NASA Programs in Space Photovoltaics

    Science.gov (United States)

    Flood, Dennis J.

    1992-01-01

    Highlighted here are some of the current programs in advanced space solar cell and array development conducted by NASA in support of its future mission requirements. Recent developments are presented for a variety of solar cell types, including both single crystal and thin film cells. A brief description of an advanced concentrator array capable of AM0 efficiencies approaching 25 percent is also provided.

  13. Customer satisfaction with training programs

    NARCIS (Netherlands)

    Mulder, M.

    2001-01-01

    In this contribution, a model of evaluation of customer satisfaction about training programs is described. The model is developed and implemented for an association of training companies. The evaluation has been conducted by an independent organisation to enhance the thrustworthiness of the evaluati

  14. Inter-hemispheric asymmetry of Pedersen conductance

    Science.gov (United States)

    Deng, Y.; Lu, Y.; Sheng, C.; Yue, X.

    2015-12-01

    Ionospheric conductance is very important to the magnetosphere-ionosphere coupling in the high latitude region, since it connects the polar cap potential with the currents. Meanwhile, the altitudinal distribution of Pederson conductance gives us a rough idea about the altitudinal distribution of Joule heating at high latitudes. Based on the Constellation Observing System for Meteorology, Ionosphere, and Climate (COSMIC) satellites observations of electron density profiles from 2009-2014, Pedersen conductivity has been calculated. A climatologic study of the height-integrated Pedersen conductivities in both E (100-150 km) and F (150-600 km) regions and their ratio in different seasons, solar and geomagnetic conditions have been conducted. A significant inter-hemispheric asymmetry is identified in the seasonal variation. Meanwhile, the conductance in both regions and the conductance ratio show a strong dependence on F10.7 and Ap indices. This result will strongly help our understanding of the inter-hemispheric difference in the high-latitude electrodynamics.

  15. Thermal conductivity measurements of Summit polycrystalline silicon.

    Energy Technology Data Exchange (ETDEWEB)

    Clemens, Rebecca; Kuppers, Jaron D.; Phinney, Leslie Mary

    2006-11-01

    A capability for measuring the thermal conductivity of microelectromechanical systems (MEMS) materials using a steady state resistance technique was developed and used to measure the thermal conductivities of SUMMiT{trademark} V layers. Thermal conductivities were measured over two temperature ranges: 100K to 350K and 293K to 575K in order to generate two data sets. The steady state resistance technique uses surface micromachined bridge structures fabricated using the standard SUMMiT fabrication process. Electrical resistance and resistivity data are reported for poly1-poly2 laminate, poly2, poly3, and poly4 polysilicon structural layers in the SUMMiT process from 83K to 575K. Thermal conductivity measurements for these polysilicon layers demonstrate for the first time that the thermal conductivity is a function of the particular SUMMiT layer. Also, the poly2 layer has a different variation in thermal conductivity as the temperature is decreased than the poly1-poly2 laminate, poly3, and poly4 layers. As the temperature increases above room temperature, the difference in thermal conductivity between the layers decreases.

  16. Nanostructured conductive polymers for advanced energy storage.

    Science.gov (United States)

    Shi, Ye; Peng, Lele; Ding, Yu; Zhao, Yu; Yu, Guihua

    2015-10-07

    Conductive polymers combine the attractive properties associated with conventional polymers and unique electronic properties of metals or semiconductors. Recently, nanostructured conductive polymers have aroused considerable research interest owing to their unique properties over their bulk counterparts, such as large surface areas and shortened pathways for charge/mass transport, which make them promising candidates for broad applications in energy conversion and storage, sensors, actuators, and biomedical devices. Numerous synthetic strategies have been developed to obtain various conductive polymer nanostructures, and high-performance devices based on these nanostructured conductive polymers have been realized. This Tutorial review describes the synthesis and characteristics of different conductive polymer nanostructures; presents the representative applications of nanostructured conductive polymers as active electrode materials for electrochemical capacitors and lithium-ion batteries and new perspectives of functional materials for next-generation high-energy batteries, meanwhile discusses the general design rules, advantages, and limitations of nanostructured conductive polymers in the energy storage field; and provides new insights into future directions.

  17. The Electronic Thermal Conductivity of Graphene.

    Science.gov (United States)

    Kim, Tae Yun; Park, Cheol-Hwan; Marzari, Nicola

    2016-04-13

    Graphene, as a semimetal with the largest known thermal conductivity, is an ideal system to study the interplay between electronic and lattice contributions to thermal transport. While the total electrical and thermal conductivity have been extensively investigated, a detailed first-principles study of its electronic thermal conductivity is still missing. Here, we first characterize the electron-phonon intrinsic contribution to the electronic thermal resistivity of graphene as a function of doping using electronic and phonon dispersions and electron-phonon couplings calculated from first-principles at the level of density-functional theory and many-body perturbation theory (GW). Then, we include extrinsic electron-impurity scattering using low-temperature experimental estimates. Under these conditions, we find that the in-plane electronic thermal conductivity κe of doped graphene is ∼300 W/mK at room temperature, independently of doping. This result is much larger than expected and comparable to the total thermal conductivity of typical metals, contributing ∼10% to the total thermal conductivity of bulk graphene. Notably, in samples whose physical or domain sizes are of the order of few micrometers or smaller, the relative contribution coming from the electronic thermal conductivity is more important than in the bulk limit, because lattice thermal conductivity is much more sensitive to sample or grain size at these scales. Last, when electron-impurity scattering effects are included we find that the electronic thermal conductivity is reduced by 30 to 70%. We also find that the Wiedemann-Franz law is broadly satisfied at low and high temperatures but with the largest deviations of 20-50% around room temperature.

  18. Focus Group Evaluation from the Perspective of Program Implementers: Findings Based on the Secondary 2 Program

    Directory of Open Access Journals (Sweden)

    Daniel T. L. Shek

    2009-01-01

    Full Text Available Nine focus groups comprising 23 program implementers recruited from nine schools were conducted to evaluate the Tier 1 Program (Secondary 2 Program of the Project P.A.T.H.S. (Positive Adolescent Training through Holistic Social Programmes. Qualitative findings showed that a majority of the program implementers regarded the program as beneficial to the program participants in different psychosocial domains. The program implementers also described the program positively and positive metaphors were used to represent the program. In conjunction with the previous research findings, the present study provides further support for the effectiveness of the Tier 1 Program of Project P.A.T.H.S. in promoting holistic development among Chinese adolescents in Hong Kong.

  19. POSITRON ANNIHILATION AND CONDUCTIVITY MEASUREMENTS ON POLYANILINE

    Institute of Scientific and Technical Information of China (English)

    彭治林; 刘皓; 等

    1994-01-01

    The positron lifetime spectra and electrical conductivities have been measured for polyaniline as a function of protonation level ([H+] from 10-7-100.8 mol/L)。We observed that (1) the short lifetime τ1,which was related to electron density in bulk,decreased with the protonation level;(2) the intermediate lifetime τ2≈360ps,almost remaining constant,whereas its intensity I2 increased with increasing protonation level which was related to the conductivity of meaterial.These results are discussed in terms of conducting island model.

  20. Increased thermal conductivity monolithic zeolite structures

    Science.gov (United States)

    Klett, James; Klett, Lynn; Kaufman, Jonathan

    2008-11-25

    A monolith comprises a zeolite, a thermally conductive carbon, and a binder. The zeolite is included in the form of beads, pellets, powders and mixtures thereof. The thermally conductive carbon can be carbon nano-fibers, diamond or graphite which provide thermal conductivities in excess of about 100 W/mK to more than 1,000 W/mK. A method of preparing a zeolite monolith includes the steps of mixing a zeolite dispersion in an aqueous colloidal silica binder with a dispersion of carbon nano-fibers in water followed by dehydration and curing of the binder is given.

  1. New method for measuring the thermal conductivity.

    Science.gov (United States)

    Goldratt, E; Greenfield, A J

    1978-11-01

    A new experimental method is presented for measuring the thermal conductivity as a function of temperature. The basic innovation lies in extracting from the measured temperature profile of a sample in vacuo, the thermal conductivity of each individual cross-sectional sample element. The estimated experimental error is +/-1%. Not only is high accuracy achieved, but also a self-checking procedure offers the possibility of avoiding systematic errors. Measurements on two samples of type 304 stainless steel are presented. Three independent sets of measurements give consistent values for the thermal conductivity to well within the estimated error of +/-1%.

  2. Humidity Effects on Conductivity of DNA Molecules

    Institute of Scientific and Technical Information of China (English)

    YAN Xun-Ling; DONG Rui-Xin; LIN Qing-De

    2006-01-01

    We present a model related to the humidity to describe the conductivity of homogeneous DNA molecule,where the hydration of phosphate group and bases are taken into account. The calculated results show the oscillation feature of dⅠ/dⅤ-Ⅴ curves and the semiconductor behavior of DNA. With the relative humidity increasing, the voltage gap becomes narrow and the maximum of conductance increases nonlinearly. The conductivity of DNA approaches to stabilization when the relative humidity reaches a certain value. These results are in agreement with experimental measurements.

  3. SOME ASPECTS CONCERNING THE ATTRIBUTES OF CONDUCTING

    Directory of Open Access Journals (Sweden)

    Nicoleta Ciucescu

    2008-12-01

    Full Text Available The activity of the management has a millennial existence, during it have been realized multiple progresses which have contributed to the developement of the society in its assembly. The evolution of the human society makes possible the progress in the science of conducting. In all kinds of companies, without keeping into account their domain of activity (industry, trading, tourism, agriculture etc. or their dimensions, it appears the atributes of the conducting. In each organization the attributes of the conducting are present at all hierarchical levels. Each manager disposes on authority, power, responsability; they differ sensibly from a hierarchical level to another.

  4. Quantum conductance in silicon quantum wires

    CERN Document Server

    Bagraev, N T; Klyachkin, L E; Malyarenko, A M; Gehlhoff, W; Ivanov, V K; Shelykh, I A

    2002-01-01

    The results of investigations of electron and hole quantum conductance staircase in silicon quantum wires are presented. The characteristics of self-ordering quantum wells of n- and p-types, which from on the silicon (100) surface in the nonequilibrium boron diffusion process, are analyzed. The results of investigations of the quantum conductance as the function of temperature, carrier concentration and modulation degree of silicon quantum wires are given. It is found out, that the quantum conductance of the one-dimensional channels is observed, for the first time, at an elevated temperature (T >= 77 K)

  5. Electronically conducting polymers with silver grains

    Science.gov (United States)

    Murphy, Oliver J. (Inventor); Hitchens, G. Duncan (Inventor); Hodko, Dolibor (Inventor)

    1999-01-01

    The present invention provides electronically conducting polymer films formed from photosensitive formulations of pyrrole and an electron acceptor that have been selectively exposed to UV light, laser light, or electron beams. The formulations may include photoinitiators, flexibilizers, solvents and the like. These solutions can be used in applications including printed circuit boards and through-hole plating and enable direct metallization processes on non-conducting substrates. After forming the conductive polymer patterns, a printed wiring board can be formed by sensitizing the polymer with palladium and electrolytically depositing copper.

  6. Conductivity bounds in probe brane models

    CERN Document Server

    Ikeda, Tatsuhiko N; Nakai, Yuichiro

    2016-01-01

    We discuss upper and lower bounds on the electrical conductivity of finite temperature strongly coupled quantum field theories, holographically dual to probe brane models, within linear response. In a probe limit where disorder is introduced entirely through an inhomogeneous background charge density, we find simple lower and upper bounds on the electrical conductivity in arbitrary dimensions. In field theories in two spatial dimensions, we show that both bounds persist even when disorder is included in the bulk metric. We discuss the challenges with finding sharp lower bounds on conductivity in three or more spatial dimensions when the metric is inhomogeneous.

  7. NEW SITES IN SOUTHEASTERN BATANGAS, PHILIPPINES. REPORT ON THE SURVEY CONDUCTED BY THE UP-ARCHAEOLOGICAL STUDIES PROGRAM IN 2008 (Nuevos sitios en la Batangas sudoriental. Informe sobre el estudio realizado por el Programa de Estudios Arqueológicos de la Universidad de las Filipinas en 2008

    Directory of Open Access Journals (Sweden)

    Anna Pineda

    2009-12-01

    Full Text Available Research in Batangas started in the early 20th century and focused in the southwestern part of the province. The eastern part of Batangas due to research agenda was generally overlooked. To examine what the potential of this area, archaeological explorations were conducted in the municipalities of San Juan, Lobo, Taysan, and Padre Garcia. The team recorded 20 burial and settlement sites and some of these yielded datable materials belonging to the Developed Metal Age (100-400 AD, 15th century, and late 1800s. These new sites and dates will bring new perspectives on the archaeological history of Batangas.La investigación en Batangas se inició en el siglo XX y se centró en la parte suroeste de la provincia. La parte oriental de Batangas se pasó por alto. Para examinar el potencial de esta zona, las exploraciones arqueológicas se realizaron en los municipios de San Juan, Lobo, Taysan y Padre García. El equipo registró 20 sitios de enterramiento, algunos de los cuales libraron materiales datables pertenecientes a la fase avanzada de la edad de los metales (100-400 d. C., al siglo XV y a finales del XIX. Estos nuevos sitios y las fechas aportan nuevas perspectivas sobre la historia arqueológica de Batangas.

  8. Constraint Programming versus Mathematical Programming

    DEFF Research Database (Denmark)

    Hansen, Jesper

    2003-01-01

    Constraint Logic Programming (CLP) is a relatively new technique from the 80's with origins in Computer Science and Artificial Intelligence. Lately, much research have been focused on ways of using CLP within the paradigm of Operations Research (OR) and vice versa. The purpose of this paper...

  9. TROPOSPHERIC AEROSOL PROGRAM, PROGRAM PLAN, MARCH 2001

    Energy Technology Data Exchange (ETDEWEB)

    SCHWARTZ,S.E.; LUNN,P.

    2001-03-01

    The goal of Tropospheric Aerosol Program (TAP) will be to develop the fundamental scientific understanding required to construct tools for simulating the life cycle of tropospheric aerosols--the processes controlling their mass loading, composition, and microphysical properties, all as a function of time, location, and altitude. The TAP approach to achieving this goal will be by conducting closely linked field, modeling, laboratory, and theoretical studies focused on the processes controlling formation, growth, transport, and deposition of tropospheric aerosols. This understanding will be represented in models suitable for describing these processes on a variety of geographical scales; evaluation of these models will be a key component of TAP field activities. In carrying out these tasks TAP will work closely with other programs in DOE and in other Federal and state agencies, and with the private sector. A forum to directly work with our counterparts in industry to ensure that the results of this research are translated into products that are useful to that community will be provided by NARSTO (formerly the North American Research Strategy on Tropospheric Ozone), a public/private partnership, whose membership spans government, the utilities, industry, and university researchers in Mexico, the US, and Canada.

  10. Doing the right thing right. How to develop an effective compliance program.

    Science.gov (United States)

    Cunningham, John S

    2007-01-01

    How to develop an effective compliance program An effective corporate compliance program is a physician group's best defense against illegal business conduct. Design your practice's program with your resources and needs in mind.

  11. Linear programming

    CERN Document Server

    Karloff, Howard

    1991-01-01

    To this reviewer’s knowledge, this is the first book accessible to the upper division undergraduate or beginning graduate student that surveys linear programming from the Simplex Method…via the Ellipsoid algorithm to Karmarkar’s algorithm. Moreover, its point of view is algorithmic and thus it provides both a history and a case history of work in complexity theory. The presentation is admirable; Karloff's style is informal (even humorous at times) without sacrificing anything necessary for understanding. Diagrams (including horizontal brackets that group terms) aid in providing clarity. The end-of-chapter notes are helpful...Recommended highly for acquisition, since it is not only a textbook, but can also be used for independent reading and study. —Choice Reviews The reader will be well served by reading the monograph from cover to cover. The author succeeds in providing a concise, readable, understandable introduction to modern linear programming. —Mathematics of Computing This is a textbook intend...

  12. Prolog programming

    Energy Technology Data Exchange (ETDEWEB)

    Yazdani, M.

    1986-01-01

    A volume in the Artificial Intelligence Texts series, this book teaches Prolog programming by following a series of sample programs. New concepts are introduced step-by-step in order to present solutions to problems, each problem being chosen so that its solution exposes one of the features of Prolog. The examples are chosen from areas which are of practical use to readers, such as data base query, expert system design, natural language interfacing, knowledge representation, computer simulation, and planning of problem solving. Contents: Prolog as a database query language; Writing an expert system; Natural language processing; Knowledge representation; List processing and pattern matching; Planning, problem solving and simulation; Extending Prolog; A model of Prolog virtual machine.

  13. Sensory nerve conduction studies in neuralgic amyotrophy.

    Science.gov (United States)

    van Alfen, Nens; Huisman, Willem J; Overeem, S; van Engelen, B G M; Zwarts, M J

    2009-11-01

    Neuralgic amyotrophy is a painful, episodic peripheral nerve disorder localized to the brachial plexus. Sensory symptoms occur in 80% of the patients. We assessed the frequency of abnormalities in sensory nerve conduction studies of the lateral and medial antebrachial cutaneous, radial sensory, median sensory, and ulnar sensory nerves in 112 patients. Sensory nerve conduction studies showed abnormalities in nerves, even when the nerve was clinically affected. The lateral and medial antebrachial cutaneous nerves were most often abnormal, in 15% and 17% of nerves. No correlation with the presence or localization of clinical deficits was found. Brachial plexus sensory nerve conduction studies seem to be of little diagnostic value in neuralgic amyotrophy. Our findings also indicate that some sensory lesions may be in the nerve roots instead of the plexus. An examination of normal sensory nerve conduction studies does not preclude neuralgic amyotrophy as a diagnosis.

  14. Conductive concrete wins Popular Science prize

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1997-06-01

    A conductive concrete developed by a research team at IRC (Institute for Research in Construction, National Research Council of Canada) has won a prize in the home technology category because of its possible use in heating homes. Following the award, there have been a number of inquiries regarding possible applications for the concrete. Greatest interests in the concrete have been in its potential to heat buildings by using it as flooring. Other possible applications included de-icing pavements to building warming pads for parking aircraft. Essentially, carbon fibres and conductive particles are added to a concrete mix in such a quantity that they form a network within the mix, ensuring high electrical conductivity. A demonstration project is underway to build a 20 by 80 foot conductive concrete pad to test the material`s capability as a snow removal and de-icing tool.

  15. Conductivity Probe after Trench-Bottom Placement

    Science.gov (United States)

    2008-01-01

    Needles of the thermal and conductivity probe on NASA's Phoenix Mars Lander were positioned into the bottom of a trench called 'Upper Cupboard' during Sol 86 (Aug. 21, 2008), or 86th Martian day after landing. This image of the conductivity probe after it was raised back out of the trench was taken by Phoenix's Robotic Arm Camera. The conductivity probe is at the wrist of the robotic arm's scoop. The probe measures how fast heat and electricity move from one needle to an adjacent one through the soil or air between the needles. Conductivity readings can be indicators about water vapor, water ice and liquid water. The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  16. Characterising and modelling extended conducted electromagnetic emission

    CSIR Research Space (South Africa)

    Grobler, Inus

    2013-06-01

    Full Text Available -1 2013 IEEE Energy Conversion Congress and Exposition Asia (ECCE Downunder), Melbourne, Australia, 3-6 June 2013 Characterising and Modelling Extended Conducted Electromagnetic Emission I Grobler1 and MN Gitau2 Department of Electrical...

  17. Information filtering via biased heat conduction

    CERN Document Server

    Liu, Jian-Guo; Guo, Qiang

    2011-01-01

    Heat conduction process has recently found its application in personalized recommendation [T. Zhou \\emph{et al.}, PNAS 107, 4511 (2010)], which is of high diversity but low accuracy. By decreasing the temperatures of small-degree objects, we present an improved algorithm, called biased heat conduction (BHC), which could simultaneously enhance the accuracy and diversity. Extensive experimental analyses demonstrate that the accuracy on MovieLens, Netflix and Delicious datasets could be improved by 43.5%, 55.4% and 19.2% compared with the standard heat conduction algorithm, and the diversity is also increased or approximately unchanged. Further statistical analyses suggest that the present algorithm could simultaneously identify users' mainstream and special tastes, resulting in better performance than the standard heat conduction algorithm. This work provides a creditable way for highly efficient information filtering.

  18. Information filtering via biased heat conduction

    Science.gov (United States)

    Liu, Jian-Guo; Zhou, Tao; Guo, Qiang

    2011-09-01

    The process of heat conduction has recently found application in personalized recommendation [Zhou , Proc. Natl. Acad. Sci. USA PNASA60027-842410.1073/pnas.1000488107107, 4511 (2010)], which is of high diversity but low accuracy. By decreasing the temperatures of small-degree objects, we present an improved algorithm, called biased heat conduction, which could simultaneously enhance the accuracy and diversity. Extensive experimental analyses demonstrate that the accuracy on MovieLens, Netflix, and Delicious datasets could be improved by 43.5%, 55.4% and 19.2%, respectively, compared with the standard heat conduction algorithm and also the diversity is increased or approximately unchanged. Further statistical analyses suggest that the present algorithm could simultaneously identify users' mainstream and special tastes, resulting in better performance than the standard heat conduction algorithm. This work provides a creditable way for highly efficient information filtering.

  19. 12 CFR 13.3 - Business conduct.

    Science.gov (United States)

    2010-01-01

    ... Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY GOVERNMENT SECURITIES SALES PRACTICES § 13.3 Business conduct. A bank that is a government securities broker or dealer shall observe high... government securities broker or dealer....

  20. Thermal Conductance through Sapphire-Sapphire Bonding

    Science.gov (United States)

    Suzuki, T.; Tomaru, T.; Haruyama, T.; Shintomi, T.; Uchinyama, T.; Miyoki, S.; Ohashi, M.; Kuroda, K.

    2003-07-01

    Thermal conductance on sapphire-sapphire bonded interface has been investigated. Two pieces of single crystal sapphire bar with square cross section were bonded together by adhesion free bonding. In two sections of the bar, thermal conductivity was measured between 5 K to 300K. One section contains a bonded interface and the other section measured a thermal conductivity of the sapphire as a reference. No significant thermal resistance due to bonded interface was found from this measurement. Obtained thermal conductivity reaches κ 1 × 104 [W/m·K] in temperature range of T = 20 ˜ 30 K which is a planned operating temperature of a cryogenic mirror of the Large scale Cryogenic Gravitational wave telescope. It looks promising for sapphire bonding technique to improve a heat transfer from a large cryogenic mirror to susp ension wires.

  1. Conducting polymers for electrochemical DNA sensing.

    Science.gov (United States)

    Peng, Hui; Zhang, Lijuan; Soeller, Christian; Travas-Sejdic, Jadranka

    2009-04-01

    Conducting polymers (CPs) are a class of polymeric materials that have attracted considerable interest because of their unique electronic, chemical and biochemical properties, making them suitable for numerous applications such as energy storage, memory devices, chemical sensors, and in electrocatalysis. Conducting polymer-based electrochemical DNA sensors have shown applicability in a number of areas related to human health such as diagnosis of infectious diseases, genetic mutations, drug discovery, forensics and food technology due to their simplicity and high sensitivity. This review paper summarizes the advances in electrochemical DNA sensing based on conducting polymers as active substrates. The various conducting polymers used for DNA detection, along with different DNA immobilization and detection methodologies are presented. Current trends in this field and newly developed applications due to advances in nanotechnology are also discussed.

  2. Gate-controlled conductance switching in DNA

    Science.gov (United States)

    Xiang, Limin; Palma, Julio L.; Li, Yueqi; Mujica, Vladimiro; Ratner, Mark A.; Tao, Nongjian

    2017-02-01

    Extensive evidence has shown that long-range charge transport can occur along double helical DNA, but active control (switching) of single-DNA conductance with an external field has not yet been demonstrated. Here we demonstrate conductance switching in DNA by replacing a DNA base with a redox group. By applying an electrochemical (EC) gate voltage to the molecule, we switch the redox group between the oxidized and reduced states, leading to reversible switching of the DNA conductance between two discrete levels. We further show that monitoring the individual conductance switching allows the study of redox reaction kinetics and thermodynamics at single molecular level using DNA as a probe. Our theoretical calculations suggest that the switch is due to the change in the energy level alignment of the redox states relative to the Fermi level of the electrodes.

  3. Thermal conductivity of sintered lithium orthosilicate compacts

    Science.gov (United States)

    Löbbecke, Birgit; Knitter, Regina; Rohde, Magnus; Reimann, Jörg

    2009-04-01

    The design of solid breeder blankets is strongly affected by the low values of thermal conductivity and density of ceramic breeder pebble beds. A significant rise of both quantities would enhance the thermal performance and lead to an increased tritium breeding ratio. In order to improve these quantities pretreated lithium orthosilicate pebble material was dry pressed and subsequently sintered. The thermal conductivity of cylindrical pellets was determined by the heat pulse method using a laser flash device. A pebble bed characteristic sample was also investigated in order to check the measurement accuracy in comparison with previous results. Furthermore, two samples of low density cellular ceramics were also prepared by infiltration of polymer foams with a ceramic slurry. The thermal conductivity results show that the values are affected both by the particle size and the sample density. Thermal conductivity values of higher than 2 W/m K were obtained using large particles and sintering at 1000 °C.

  4. Conducting polymer based biomolecular electronic devices

    Indian Academy of Sciences (India)

    B D Malhotra; Rahul Singhal

    2003-08-01

    Biomolecular electronics is rapidly evolving from physics, chemistry, biology, electronics and information technology. Organic materials such as proteins, pigments and conducting polymers have been considered as alternatives for carrying out the functions that are presently being performed by semiconductor silicon. Conducting polymers such as polypyrroles, polythiophenes and polyanilines have been projected for applications for a wide range of biomolecular electronic devices such as optical, electronic, drug-delivery, memory and biosensing devices. Our group has been actively working towards the application of conducting polymers to Schottky diodes, metal–insulator–semiconductor (MIS) devices and biosensors for the past 10 years. This paper is a review of some of the results obtained at our laboratory in the area of conducting polymer biomolecular electronics.

  5. Thermal conductivity of thermal-battery insulations

    Energy Technology Data Exchange (ETDEWEB)

    Guidotti, R.A.; Moss, M.

    1995-08-01

    The thermal conductivities of a variety of insulating materials used in thermal batteries were measured in atmospheres of argon and helium using several techniques. (Helium was used to simulate the hydrogen atmosphere that results when a Li(Si)/FeS{sub 2} thermal battery ages.) The guarded-hot-plate method was used with the Min-K insulation because of its extremely low thermal conductivity. For comparison purposes, the thermal conductivity of the Min-K insulating board was also measured using the hot-probe method. The thermal-comparator method was used for the rigid Fiberfrax board and Fiberfrax paper. The thermal conductivity of the paper was measured under several levels of compression to simulate the conditions of the insulating wrap used on the stack in a thermal battery. The results of preliminary thermal-characterization tests with several silica aerogel materials are also presented.

  6. Thermodynamic parameters of elasticity and electrical conductivity ...

    African Journals Online (AJOL)

    Thermodynamic parameters of elasticity and electrical conductivity of reinforced natural rubber (nr) vulca nizates. ... Bulletin of the Chemical Society of Ethiopia ... The thermodynamic parameters (change in free energy of elasticity, DGe; ...

  7. Phoenix Conductivity Probe Inserted into Martian Soil

    Science.gov (United States)

    2008-01-01

    NASA's Phoenix Mars Lander inserted the four needles of its thermal and conductivity probe into Martian soil during the 98th Martian day, or sol, of the mission and left it in place until Sol 99 (Sept. 4, 2008). The Robotic Arm Camera on Phoenix took this image on the morning of Sol 99 while the probe's needles were in the ground. The science team informally named this soil target 'Gandalf.' The thermal and conductivity probe measures how fast heat and electricity move from one needle to an adjacent one through the soil or air between the needles. Conductivity readings can be indicators about water vapor, water ice and liquid water. The probe is part of Phoenix's Microscopy, Electrochemistry and Conductivity suite of instruments. The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  8. Conducted Electromagnetic Interference (EMI) in Smart Grids

    CERN Document Server

    Smolenski, Robert

    2012-01-01

    As power systems develop to incorporate renewable energy sources, the delivery systems may be disrupted by the changes involved. The grid’s technology and management must be developed to form Smart Grids between consumers, suppliers and producers. Conducted Electromagnetic Interference (EMI) in Smart Grids considers the specific side effects related to electromagnetic interference (EMI) generated by the application of these Smart Grids. Conducted Electromagnetic Interference (EMI) in Smart Grids presents specific EMI conducted phenomena as well as effective methods to filter and handle them once identified. After introduction to Smart Grids, the following sections cover dedicated methods for EMI reduction and potential avenues for future development including chapters dedicated to: •potential system services, •descriptions of the EMI spectra shaping methods, •methods of interference voltage compensation, and theoretical analysis of experimental results.  By focusing on these key aspects, Conducted El...

  9. Lattice thermal conductivity evaluated using elastic properties

    Science.gov (United States)

    Jia, Tiantian; Chen, Gang; Zhang, Yongsheng

    2017-04-01

    Lattice thermal conductivity is one of the most important thermoelectric parameters in determining the energy conversion efficiency of thermoelectric materials. However, the lattice thermal conductivity evaluation requires time-consuming first-principles (quasi)phonon calculations, which limits seeking high-performance thermoelectric materials through high-throughput computations. Here, we establish a methodology to determine the Debye temperature Θ , Grüneisen parameter γ , and lattice thermal conductivity κ using computationally feasible elastic properties (the bulk and shear moduli). For 39 compounds with three different prototypes (the cubic isotropic rocksalt and zinc blende, and the noncubic anisotropic wurtzite), the theoretically calculated Θ ,γ , and κ are in reasonable agreement with those determined using (quasi)harmonic phonon calculations or experimental measurements. Our results show that the methodology is an efficient tool to predict the anharmonicity and the lattice thermal conductivity.

  10. Modeling liver electrical conductivity during hypertonic injection.

    Science.gov (United States)

    Castellví, Quim; Sánchez-Velázquez, Patricia; Moll, Xavier; Berjano, Enrique; Andaluz, Anna; Burdío, Fernando; Bijnens, Bart; Ivorra, Antoni

    2017-05-30

    Metastases in the liver frequently grow as scattered tumor nodules that neither can be removed by surgical resection nor focally ablated. Previously, we have proposed a novel technique based on irreversible electroporation that may be able to simultaneously treat all nodules in the liver while sparing healthy tissue. The proposed technique requires increasing the electrical conductivity of healthy liver by injecting a hypersaline solution through the portal vein. Aiming to assess the capability of increasing the global conductivity of the liver by means of hypersaline fluids, here, it is presented a mathematical model that estimates the NaCl distribution within the liver and the resulting conductivity change. The model fuses well-established compartmental pharmacokinetic models of the organ with saline injection models used for resuscitation treatments, and it considers changes in sinusoidal blood viscosity because of the hypertonicity of the solution. Here, it is also described a pilot experimental study in pigs in which different volumes of NaCl 20% (from 100 to 200 mL) were injected through the portal vein at different flow rates (from 53 to 171 mL/minute). The in vivo conductivity results fit those obtained by the model, both quantitatively and qualitatively, being able to predict the maximum conductivity with a 14.6% average relative error. The maximum conductivity value was 0.44 second/m, which corresponds to increasing 4 times the mean basal conductivity (0.11 second/m). The results suggest that the presented model is well suited for predicting on liver conductivity changes during hypertonic saline injection. Copyright © 2017 John Wiley & Sons, Ltd.

  11. Conduction Mechanism in a Molecular Hydrogen Contact

    DEFF Research Database (Denmark)

    Thygesen, Kristian Sommer; Jacobsen, Karsten Wedel

    2005-01-01

    We present first principles calculations for the conductance of a hydrogen molecule bridging a pair of Pt electrodes. The transmission function has a wide plateau with Tapproximate to1 which extends across the Fermi level and indicates the existence of a single, robust conductance channel with ne...... allow us to derive a resonant-level model for the system with all parameters determined from the fully self-consistent Kohn-Sham Hamiltonian....

  12. MECHANISM OF BORAX CRYSTALLIZATION USING CONDUCTIVITY METHOD

    Directory of Open Access Journals (Sweden)

    Suharso Suharso

    2010-06-01

    Full Text Available The kinetics of crystal growth of borax has been studied by using conductivity method at temperature of 25 °C and at various relative supersaturations. It was found that the growth rate increases with increasing supersaturation. At low concentration, growth occurs via a spiral growth mechanism and at high concentration birth and spread is the principal mechanism operating.     Keywords: borax; growth rate; crystallization; conductivity method

  13. A New Conductivity Detector for Capillary Electrophoresis

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A new conductivity detector for capillary electrophoresis consisting of an electrochemical cell and a conductive meter was developed. In the cell, the microelectrode and capillary were inserted through the cell wall and fixed by screws and sealing ring, the ends of microelectrode and capillary were located by a guide with two cross holes. LOD for K+ was 1.5×10-5 mol/L.

  14. Conductive-AFM Patterning of Organic Semiconductors.

    Science.gov (United States)

    Brown, Benjamin P; Picco, Loren; Miles, Mervyn J; Faul, Charl F J

    2015-10-01

    Using a conductive atomic force microscope (c-AFM) redox-writing technique, it is shown that it is possible to locally, and reversibly, pattern conducting, and nonconducting features on the surface of a low molecular weight aniline-based organic (semi)-conductor thin film using a commercial c-AFM. It is shown that application of a voltage between the tip and sample causes localized redox reactions at the surface without damage.

  15. Conductive polymeric compositions for lithium batteries

    Science.gov (United States)

    Angell, Charles A.; Xu, Wu

    2009-03-17

    Novel chain polymers comprising weakly basic anionic moieties chemically bound into a polyether backbone at controllable anionic separations are presented. Preferred polymers comprise orthoborate anions capped with dibasic acid residues, preferably oxalato or malonato acid residues. The conductivity of these polymers is found to be high relative to that of most conventional salt-in-polymer electrolytes. The conductivity at high temperatures and wide electrochemical window make these materials especially suitable as electrolytes for rechargeable lithium batteries.

  16. Heat conduction controlled combustion for scramjet applications

    Science.gov (United States)

    Ferri, A.; Agnone, A. M.

    1974-01-01

    The use of heat conduction flame generated in a premixed supersonic stream is discussed. It is shown that the flame is controlled initially by heat conduction and then by chemical reaction. Such a flame is shorter than the diffusion type of flame and therefore it requires a much shorter burner. The mixing is obtained by injecting the hydrogen in the inlet. Then the inlet can be cooled by film cooling.

  17. Fabrication of Conductive Polypyrrole Nanofibers by Electrospinning

    Directory of Open Access Journals (Sweden)

    Yiqun Cong

    2013-01-01

    Full Text Available Electrospinning is employed to prepare conductive polypyrrole nanofibers with uniform morphology and good mechanical strength. Soluble PPy was synthesized with NaDEHS as dopant and then applied to electrospinning with or without PEO as carrier. The PEO contents had great influence on the morphology and conductivity of the electrospun material. The results of these experiments will allow us to have a better understanding of PPy electrospun nanofibers and will permit the design of effective electrodes in the BMIs fields.

  18. Ostomy Home Skills Program

    Medline Plus

    Full Text Available ... Accreditation Program for Breast Centers About NAPBC Accreditation Education NAPBC Standards News Cancer Cancer Programs Cancer Programs ... Program for Hospitals Trauma Systems Consultation Program Trauma Education Trauma Systems Conference Publications and Posters Injury Prevention ...

  19. Stretchable, Porous, and Conductive Energy Textiles

    KAUST Repository

    Hu, Liangbing

    2010-02-10

    Recently there is strong interest in lightweight, flexible, and wearable electronics to meet the technological demands of modern society. Integrated energy storage devices of this type are a key area that is still significantly underdeveloped. Here, we describe wearable power devices using everyday textiles as the platform. With an extremely simple "dipping and drying" process using single-walled carbon nanotube (SWNT) ink, we produced highly conductive textiles with conductivity of 125 S cm-1 and sheet resistance less than 1 Ω/sq. Such conductive textiles show outstanding flexibility and stretchability and demonstrate strong adhesion between the SWNTs and the textiles of interest. Supercapacitors made from these conductive textiles show high areal capacitance, up to 0.48F/cm2, and high specific energy. We demonstrate the loading of pseudocapacitor materials into these conductive textiles that leads to a 24-fold increase of the areal capacitance of the device. These highly conductive textiles can provide new design opportunities for wearable electronics and energy storage applications. © 2010 American Chemical Society.

  20. Corrosion Protection of Electrically Conductive Surfaces

    Directory of Open Access Journals (Sweden)

    Jian Song

    2012-11-01

    Full Text Available The basic function of the electrically conductive surface of electrical contacts is electrical conduction. The electrical conductivity of contact materials can be largely reduced by corrosion and in order to avoid corrosion, protective coatings must be used. Another phenomenon that leads to increasing contact resistance is fretting corrosion. Fretting corrosion is the degradation mechanism of surface material, which causes increasing contact resistance. Fretting corrosion occurs when there is a relative movement between electrical contacts with surfaces of ignoble metal. Avoiding fretting corrosion is therefore extremely challenging in electronic devices with pluggable electrical connections. Gold is one of the most commonly used noble plating materials for high performance electrical contacts because of its high corrosion resistance and its good and stable electrical behavior. The authors have investigated different ways to minimize the consumption of gold for electrical contacts and to improve the performance of gold plating. Other plating materials often used for corrosion protection of electrically conductive surfaces are tin, nickel, silver and palladium. This paper will deal with properties and new research results of different plating materials in addition to other means used for corrosion protection of electrically conductive surfaces and the testing of corrosion resistance of electrically conductive surfaces.