Antibody Fc engineering improves frequency and promotes kinetic boosting of serial killing mediated by NK cells

Science.gov (United States)

Romain, Gabrielle; Senyukov, Vladimir; Rey-Villamizar, Nicolas; Merouane, Amine; Kelton, William; Liadi, Ivan; Mahendra, Ankit; Charab, Wissam; Georgiou, George; Roysam, Badrinath; Lee, Dean A.

2014-01-01

The efficacy of most therapeutic monoclonal antibodies (mAbs) targeting tumor antigens results primarily from their ability to elicit potent cytotoxicity through effector-mediated functions. We have engineered the fragment crystallizable (Fc) region of the immunoglobulin G (IgG) mAb, HuM195, targeting the leukemic antigen CD33, by introducing the triple mutation Ser293Asp/Ala330Leu/Ile332Glu (DLE), and developed Time-lapse Imaging Microscopy in Nanowell Grids to analyze antibody-dependent cell-mediated cytotoxicity kinetics of thousands of individual natural killer (NK) cells and mAb-coated target cells. We demonstrate that the DLE-HuM195 antibody increases both the quality and the quantity of NK cell-mediated antibody-dependent cytotoxicity by endowing more NK cells to participate in cytotoxicity via accrued CD16-mediated signaling and by increasing serial killing of target cells. NK cells encountering targets coated with DLE-HuM195 induce rapid target cell apoptosis by promoting simultaneous conjugates to multiple target cells and induce apoptosis in twice the number of target cells within the same period as the wild-type mAb. Enhanced target killing was also associated with increased frequency of NK cells undergoing apoptosis, but this effect was donor-dependent. Antibody-based therapies targeting tumor antigens will benefit from a better understanding of cell-mediated tumor elimination, and our work opens further opportunities for the therapeutic targeting of CD33 in the treatment of acute myeloid leukemia. PMID:25232058

Implementation of PSF engineering in high-resolution 3D microscopy imaging with a LCoS (reflective) SLM

Science.gov (United States)

King, Sharon V.; Doblas, Ana; Patwary, Nurmohammed; Saavedra, Genaro; Martínez-Corral, Manuel; Preza, Chrysanthe

2014-03-01

Wavefront coding techniques are currently used to engineer unique point spread functions (PSFs) that enhance existing microscope modalities or create new ones. Previous work in this field demonstrated that simulated intensity PSFs encoded with a generalized cubic phase mask (GCPM) are invariant to spherical aberration or misfocus; dependent on parameter selection. Additional work demonstrated that simulated PSFs encoded with a squared cubic phase mask (SQUBIC) produce a depth invariant focal spot for application in confocal scanning microscopy. Implementation of PSF engineering theory with a liquid crystal on silicon (LCoS) spatial light modulator (SLM) enables validation of WFC phase mask designs and parameters by manipulating optical wavefront properties with a programmable diffractive element. To validate and investigate parameters of the GCPM and SQUBIC WFC masks, we implemented PSF engineering in an upright microscope modified with a dual camera port and a LCoS SLM. We present measured WFC PSFs and compare them to simulated PSFs through analysis of their effect on the microscope imaging system properties. Experimentally acquired PSFs show the same intensity distribution as simulation for the GCPM phase mask, the SQUBIC-mask and the well-known and characterized cubic-phase mask (CPM), first applied to high NA microscopy by Arnison et al.10, for extending depth of field. These measurements provide experimental validation of new WFC masks and demonstrate the use of the LCoS SLM as a WFC design tool. Although efficiency improvements are needed, this application of LCoS technology renders the microscope capable of switching among multiple WFC modes.

A Dynamic Approach to Modeling Dependence Between Human Failure Events

Energy Technology Data Exchange (ETDEWEB)

Boring, Ronald Laurids [Idaho National Laboratory

2015-09-01

In practice, most HRA methods use direct dependence from THERP—the notion that error be- gets error, and one human failure event (HFE) may increase the likelihood of subsequent HFEs. In this paper, we approach dependence from a simulation perspective in which the effects of human errors are dynamically modeled. There are three key concepts that play into this modeling: (1) Errors are driven by performance shaping factors (PSFs). In this context, the error propagation is not a result of the presence of an HFE yielding overall increases in subsequent HFEs. Rather, it is shared PSFs that cause dependence. (2) PSFs have qualities of lag and latency. These two qualities are not currently considered in HRA methods that use PSFs. Yet, to model the effects of PSFs, it is not simply a matter of identifying the discrete effects of a particular PSF on performance. The effects of PSFs must be considered temporally, as the PSFs will have a range of effects across the event sequence. (3) Finally, there is the concept of error spilling. When PSFs are activated, they not only have temporal effects but also lateral effects on other PSFs, leading to emergent errors. This paper presents the framework for tying together these dynamic dependence concepts.

Visualization of dermal alteration in skin lesions with discoid lupus erythematosus by multiphoton microscopy

International Nuclear Information System (INIS)

Lin, L H; Yu, H B; Zhu, X Q; Zhuo, S M; Chen, J X; Wang, Y Y; Yang, Y H

2013-01-01

Discoid lupus erythematosus (DLE) is a chronic dermatological disease which lacks valid methods for early diagnosis and therapeutic monitoring. Considering the collagen and elastin disorder due to mucin deposition of DLE, multiphoton microscopy (MPM) imaging techniques were employed to obtain high-resolution collagen and elastin images from the dermis. The content and distribution of collagen and elastin were quantified to characterize the dermal pathological status of skin lesions with DLE in comparison with normal skin. Our results showed a significant difference between skin lesions with DLE and normal skin in terms of the morphological structure of collagen and elastin in the dermis, demonstrating the possibility of MPM for noninvasively tracking the pathological process of DLE even in its early stages and evaluating the therapeutic efficacy at the molecular level. (paper)

Synthesis of atmospheric turbulence point spread functions by sparse and redundant representations

Science.gov (United States)

Hunt, Bobby R.; Iler, Amber L.; Bailey, Christopher A.; Rucci, Michael A.

2018-02-01

Atmospheric turbulence is a fundamental problem in imaging through long slant ranges, horizontal-range paths, or uplooking astronomical cases through the atmosphere. An essential characterization of atmospheric turbulence is the point spread function (PSF). Turbulence images can be simulated to study basic questions, such as image quality and image restoration, by synthesizing PSFs of desired properties. In this paper, we report on a method to synthesize PSFs of atmospheric turbulence. The method uses recent developments in sparse and redundant representations. From a training set of measured atmospheric PSFs, we construct a dictionary of "basis functions" that characterize the atmospheric turbulence PSFs. A PSF can be synthesized from this dictionary by a properly weighted combination of dictionary elements. We disclose an algorithm to synthesize PSFs from the dictionary. The algorithm can synthesize PSFs in three orders of magnitude less computing time than conventional wave optics propagation methods. The resulting PSFs are also shown to be statistically representative of the turbulence conditions that were used to construct the dictionary.

The patient-specific functional scale: psychometrics, clinimetrics, and application as a clinical outcome measure.

Science.gov (United States)

Horn, Katyana Kowalchuk; Jennings, Sophie; Richardson, Gillian; Vliet, Ditte Van; Hefford, Cheryl; Abbott, J Haxby

2012-01-01

Systematic review of the literature. To summarize peer-reviewed literature on the reliability, validity, and responsiveness of the Patient-Specific Functional Scale (PSFS), and to identify its use as an outcome measure. Searches were performed of several electronic databases from 1995 to May 2010. Studies included were published articles containing (1) primary research investigating the psychometric and clinimetrics of the PSFS or (2) the implementation of the PSFS as an outcome measure. We assessed the methodological quality of studies included in the first category. Two hundred forty-two articles published from 1994 to May 2010 were identified. Of these, 66 met the inclusion criteria for this review, with 13 reporting the measurement properties of the PSFS, 55 implementing the PSFS as an outcome measure, and 2 doing both of the above. The PSFS was reported to be valid, reliable, and responsive in populations with knee dysfunction, cervical radiculopathy, acute low back pain, mechanical low back pain, and neck dysfunction. The PSFS was found to be reliable and responsive in populations with chronic low back pain. The PSFS was also reported to be valid, reliable, or responsive in individuals with a limited number of acute, subacute, and chronic conditions. This review found that the PSFS is also being used as an outcome measure in many other conditions, despite a lack of published evidence supporting its validity in these conditions. Although the use of the PSFS as an outcome measure is increasing in physiotherapy practice, there are gaps in the research literature regarding its validity, reliability, and responsiveness in many health conditions.

Diospyros lotus leaf and grapefruit stem extract synergistically ameliorate atopic dermatitis-like skin lesion in mice by suppressing infiltration of mast cells in skin lesions.

Science.gov (United States)

Cho, Byoung Ok; Che, Denis Nchang; Yin, Hong Hua; Shin, Jae Young; Jang, Seon Il

2017-05-01

Atopic dermatitis, a chronic relapsing and pruritic inflammation of the skin also thought to be involved in, or caused by immune system destruction is an upsetting health problem due to its continuously increasing incidence especially in developed countries. Mast cell infiltration in atopic dermatitis skin lesions and its IgE-mediated activation releases various cytokines and chemokines that have been implicated in the pathogenesis of atopic dermatitis. This study was aimed at investigating synergistic anti-inflammatory, anti-pruritic and anti-atopic dermatitis effects of Diospyros lotus leaf extract (DLE) and Muscat bailey A grapefruit stem extract (GFSE) in atopic dermatitis-like induced skin lesions in mice. Combinations of DLE and GFSE inhibited TNF-α and IL-6 production more than DLE or GFSE in PMA plus calcium ionophore A23187-activated HMC-1 cells. DLE and GFSE synergistically inhibited compound 48/80-induced dermal infiltration of mast cells and reduced scratching behavior than DLE or GFSE. Furthermore, DLE and GFSE synergistically showed a stronger ameliorative effect in skin lesions by reducing clinical scores; dermal infiltration of mast cells; ear and dorsal skin thickness; serum IgE and IL-4 production in atopic dermatitis-like mice. Collectively, these results suggest that DLE and GFSE synergistically exhibit anti-atopic dermatitis effects in atopic dermatitis-like skin lesions in mice. Copyright © 2017. Published by Elsevier Masson SAS.

Anti-Inflammatory Effect of Dialyzable Leukocyte Extract in Autoimmune Prostatitis: Evaluation in Animal Model

Directory of Open Access Journals (Sweden)

Carlos Pérez-Alvarado

2017-01-01

Full Text Available Objective. To evaluate the anti-inflammatory properties of Dialyzable Leukocyte Extract (DLE in a murine model of chronic prostatitis/chronic pelvic pain syndrome (CP/CPPS. Methods. Histopathological characterization, prostatein Enzyme-Linked Immunosorbent Assay, and immunohistochemical analysis for CD45, TNF-α, IFN-γ, IL-6, IL-17, and IL-4 molecules were done in prostatic Wistar rats treated with DLE, placebo, or Dexamethasone. Results. Histopathological analysis of animals induced to prostatitis showed inflammatory infiltrate, mainly constituted by leucocytes and mast cells as well as Benign Prostatic Hyperplasia. Serum prostatein concentrations were 14 times higher than those displayed by healthy animals. After DLE and Dexamethasone treatments, the inflammatory infiltrate decreased; the tissue morphology was similar to that of a normal prostate, and the prostatein decreased to the basal levels of healthy animals. DLE treatment produced a decreased expression of the cell surface marker CD45 and the proinflammatory cytokines TNF-α, IFN-γ, IL-6, and IL-17. On the other hand, the expression of anti-inflammatory cytokine IL-4 increased in both the Dexamethasone and DLE groups. Conclusion. DLE is able to modulate the inflammatory response in Experimental Autoimmune Prostatitis (EAP.

Spasticity improvement in patients with relapsing-remitting multiple sclerosis switching from interferon-β to glatiramer acetate: the Escala Study.

Science.gov (United States)

Meca-Lallana, J E; Balseiro, J J; Lacruz, F; Guijarro, C; Sanchez, O; Cano, A; Costa-Frossard, L; Hernández-Clares, R; Sanchez-de la Rosa, R

2012-04-15

A recent pilot study suggested spasticity improvement during glatiramer acetate (GA) treatment in multiple sclerosis (MS) patients who previously received interferon-β (IFN-β). To evaluate changes in spasticity in MS patients switching from IFN-β to GA. Observational, multicentre study in patients with relapsing-remitting MS (RRMS) and spasticity switching from IFN-β to GA. The primary endpoint comprised changes on Penn Spasm Frequency Scale (PSFS), Modified Ashworth Scale (MAS), Adductor Tone Rating Scale (ATRS), and Global Pain Score (GPS) at months 3 and 6 after starting GA. Sixty-eight evaluable patients were included (mean age,41.7±9.5 years; female,70.6%; mean time from MS diagnosis to starting GA,7.6±5.7 years). Previous treatments were subcutaneous IFN-β1a in 42.6% patients, intramuscular IFN-β1a in 41.2% and IFN-β1b in 32.4%, whose mean durations were 3.5±3.3, 2.7±2.5 and 4.4±3.6 years, respectively. Statistically significant reductions in mean scores on all spasticity measurements were observed from baseline to month 3 (PSFS, 1.7±0.9 vs 1.4±0.6, p<0.01; MAS, 0.7±0.5 vs 0.6±0.5, p<0.01; highest MAS score, 1.9±0.8 vs 1.7±0.8, p<0.01; ATRS, 1.6±0.6 vs 1.4±0.6, p<0.01; GPS, 29.4±22.1 vs 24.7±19.4, p<0.01) and from baseline to month 6 (PSFS, 1.7±0.9 vs 1.3±0.6, p<0.01; MAS, 0.7±0.5 vs 0.5±0.5, p<0.01; highest MAS score, 1.9±0.8 vs 1.5±0.9, p<0.01; ATRS, 1.6±0.6 vs 1.3±0.6, p<0.01; GPS, 29.4±22.1 vs 19.1±14.8, p<0.01). Spasticity improvement in terms of spasm frequency, muscle tone and pain can be noted after three months and prolonged for six months of GA treatment. Copyright © 2011 Elsevier B.V. All rights reserved.

Modelling and assessment of dependent performance shaping factors through Analytic Network Process

International Nuclear Information System (INIS)

De Ambroggi, Massimiliano; Trucco, Paolo

2011-01-01

Despite continuous progresses in research and applications, one of the major weaknesses of current HRA methods dwells in their limited capability of modelling the mutual influences between performance shaping factors (PSFs). Indeed at least two types of dependencies between PSFs can be defined: (i) dependency between the states of the PSFs; (ii) dependency between the influences (impacts) of the PSFs on the human performance. This paper introduces a method, based on Analytic Network Process (ANP), for the quantification of the latter, where the overall contribution of each PSF (weight) to the human error probability (HEP) is eventually returned. The core of the method is the modelling process, articulated into two steps: firstly, a qualitative network of dependencies between PSFs is identified, then, the importance of each PSF is quantitatively assessed using ANP. The model allows to distinguish two components of the PSF influence: direct influence that is the influence that the considered PSF is able to express by itself, notwithstanding the presence of other PSFs and indirect influence that is the incremental influence of the considered PSF through its influence on other PSFs. A case study in Air Traffic Control is presented where the proposed approach is integrated into the cognitive simulator PROCOS. The results demonstrated a significant modification of the influence of PSFs over the operator performance when dependencies are taken into account, underlining the importance of considering not only the possible correlation between the states of PSFs but also their mutual dependency in affecting human performance in complex systems.

Fluorescence microscopy point spread function model accounting for aberrations due to refractive index variability within a specimen.

Science.gov (United States)

Ghosh, Sreya; Preza, Chrysanthe

2015-07-01

A three-dimensional (3-D) point spread function (PSF) model for wide-field fluorescence microscopy, suitable for imaging samples with variable refractive index (RI) in multilayered media, is presented. This PSF model is a key component for accurate 3-D image restoration of thick biological samples, such as lung tissue. Microscope- and specimen-derived parameters are combined with a rigorous vectorial formulation to obtain a new PSF model that accounts for additional aberrations due to specimen RI variability. Experimental evaluation and verification of the PSF model was accomplished using images from 175-nm fluorescent beads in a controlled test sample. Fundamental experimental validation of the advantage of using improved PSFs in depth-variant restoration was accomplished by restoring experimental data from beads (6  μm in diameter) mounted in a sample with RI variation. In the investigated study, improvement in restoration accuracy in the range of 18 to 35% was observed when PSFs from the proposed model were used over restoration using PSFs from an existing model. The new PSF model was further validated by showing that its prediction compares to an experimental PSF (determined from 175-nm beads located below a thick rat lung slice) with a 42% improved accuracy over the current PSF model prediction.

Overview of experimental progress on understanding photon strength functions with an emphasis of the Oslo method

Science.gov (United States)

Krticka, Milan

2015-10-01

The so-called Photon Strength Functions (PSFs) for different multipolarities are, together with the Nuclear Level Density (NLD) the key entities describing the statistical γ-decay of nucleus. It is well known that PSFs at energies above the threshold for particle emission are well described by the Lorentzian shape of the Giant Electric Dipole Resonance (GEDR). On the other hand, shapes of RSFs at the low-energy tail of GEDR are known rather poorly. Information on the PSFs at the GEDR tail can be obtained from several different experimental techniques. They will be summarized and the most important ones briefly introduced in this contribution. Special emphasis will be put on the so-called Oslo method which allows simultaneous extraction of the NLD and the PSFs from particle- γ coincidence measurements. This method has been used for determining the NLD and the PSFs in many nuclei in A ~ 45- 240 range during past years. Examples of the most interesting results obtained with this method will be shown. The results will be compared to information on the PSFs available from other experimental techniques. The strengths and the weaknesses of the method will be thoroughly discussed.

Opportunities and Internationalisation of PSFs

DEFF Research Database (Denmark)

Jensen, Søren Henning; Poulfelt, Flemming

2017-01-01

to opportunities. Instead, it seems to be a very scattered landscape. However, the analysis reveals that there seems to be a focus on sub-industries or businesses rather than looking on PSF as a whole. In addition, the analysis indicates that opportunities are dealt with as an underlying issue closely related...

Acute and late toxicities of radiotherapy for patients with discoid lupus erythematosus: a retrospective case-control study

Directory of Open Access Journals (Sweden)

Patel Ajaykumar B

2012-02-01

Full Text Available Abstract Background The purpose of this study was to evaluate acute and late toxicities of radiotherapy for patients with discoid lupus erythematosus (DLE. Methods A retrospective review was performed of patients with DLE who received radiotherapy at our institution between 1980 and 2005. Patients with other connective tissue disorders were excluded. Control patients were matched 2:1 with the DLE treatment courses based on age, cancer diagnosis, year of treatment, radiotherapy dose, and sex. Acute (within 30 days from the completion of radiotherapy and late toxicities were evaluated for each treatment course using the Common Terminology Criteria for Adverse Events Version 3.0. Results Twelve patients with DLE received a total of 15 radiotherapy courses. The median follow-up time was 2.6 years (range, 0.0-15.2 years. Acute toxicity of any organ was observed in 10 (67% treatment courses, of which 2 (13% were Grade 3 or higher. Acute Grade 1 or 2 dermatologic toxicity was observed in 8 courses (53%. Late toxicity of any organ was observed in 7 of 12 (58% evaluable treatment courses, of which 3 (23% were grade 3 or higher. Late grade 1 or 2 dermatologic toxicity was observed in 5 (42% courses. No patient experienced acute or late Grade 3 or higher dermatologic toxicity. The rates of any organ or dermatologic acute and late toxicity were not significantly different between DLE and control treatment courses. Conclusions Our findings do not suggest an increased risk of toxicity to the skin or other organs in patients with DLE receiving radiotherapy.

Acute and late toxicities of radiotherapy for patients with discoid lupus erythematosus: a retrospective case-control study

International Nuclear Information System (INIS)

Patel, Ajaykumar B; Hallemeier, Christopher L; Petersen, Ivy A; Jensen, Ashley W; Osborn, Thomas G; Miller, Robert C

2012-01-01

The purpose of this study was to evaluate acute and late toxicities of radiotherapy for patients with discoid lupus erythematosus (DLE). A retrospective review was performed of patients with DLE who received radiotherapy at our institution between 1980 and 2005. Patients with other connective tissue disorders were excluded. Control patients were matched 2:1 with the DLE treatment courses based on age, cancer diagnosis, year of treatment, radiotherapy dose, and sex. Acute (within 30 days from the completion of radiotherapy) and late toxicities were evaluated for each treatment course using the Common Terminology Criteria for Adverse Events Version 3.0. Twelve patients with DLE received a total of 15 radiotherapy courses. The median follow-up time was 2.6 years (range, 0.0-15.2 years). Acute toxicity of any organ was observed in 10 (67%) treatment courses, of which 2 (13%) were Grade 3 or higher. Acute Grade 1 or 2 dermatologic toxicity was observed in 8 courses (53%). Late toxicity of any organ was observed in 7 of 12 (58%) evaluable treatment courses, of which 3 (23%) were grade 3 or higher. Late grade 1 or 2 dermatologic toxicity was observed in 5 (42%) courses. No patient experienced acute or late Grade 3 or higher dermatologic toxicity. The rates of any organ or dermatologic acute and late toxicity were not significantly different between DLE and control treatment courses. Our findings do not suggest an increased risk of toxicity to the skin or other organs in patients with DLE receiving radiotherapy

Development of a HRA method based on Human Factor Issues for advanced NPP

International Nuclear Information System (INIS)

Lee, Seung Woo; Seong, Poong Hyun; Ha, Jun Su; Park, Jae Hyuk; Kim, Ja Kyung

2010-01-01

A design of instrumentation and control (I and C) systems for various plant systems including nuclear power plants (NPPs) is rapidly moving toward fully digital I and C and modern computer techniques have been gradually introduced into the design of advanced main control room (MCR). In advanced MCR, computer based Human-System Interfaces (HSIs) such as CRT based displays, large display panels (LDP), advanced information system, soft control and computerized procedure system (CPS) are applied in advanced MCR. Human operators in an advanced MCR still play an important role. However, various research and experiences from NPPs with an advanced MCR show that characteristics of human operators' task would be changed due to the use of inexperienced HSIs. This gives implications to the PSFs (Performance Shaping Factors) in HRA (Human Reliability Analysis). PSF in HRA is an aspect of the human's individual characteristics, environment, organization, or task that specifically decrements or improves human performance resulting in increasing or decreasing the likelihood of human error. These PSFs have been suggested in various ways depending on the HRA methods used. In most HRA methods, however, there is a lack of inconsistency for the derivation of the PSFs and a lack of considerations of how the changes implemented in advanced MCR give impact on the operators' task. In this study, a framework for the derivation of and evaluation in the PSFs to be used in HRA for advanced NPPs is suggested

Genetic similarities and differences between discoid and systemic lupus erythematosus patients within the Polish population.

Science.gov (United States)

Skonieczna, Katarzyna; Czajkowski, Rafał; Kaszewski, Sebastian; Gawrych, Mariusz; Jakubowska, Aneta; Grzybowski, Tomasz

2017-06-01

Many studies have shown that some SNPs might be a risk factor for systemic lupus erythematosus (SLE), but little is known about potential susceptibility loci of the skin types of the disease. Discoid lupus erythematosus (DLE) is the most common form of the cutaneous lupus erythematosus. Nevertheless, a genetic contribution to DLE is not fully recognized. We aimed to analyze three SNPs located in the STAT4 (rs7574865), ITGAM (rs1143679) and TNXB (rs1150754) genes in both DLE and SLE patients from Poland. SNPs were genotyped using real-time polymerase chain reaction (PCR). Statistical significance of the differences between patient and control groups in both allele and genotype frequencies were calculated using two tailed Fisher's exact test. The correction for multiple testing by the Bonferroni adjustment and odds ratio were also calculated. For the first time, we have shown that the polymorphisms located in the STAT4 (rs7574865), but not in the ITGAM (rs1143679) nor the TNXB (rs1150754) genes, might be associated with the development of DLE within the Polish population. The variation of the three investigated SNPs was found to be associated with SLE in our dataset. The results of our study suggest differences in the molecular background between DLE and SLE within the Polish population.

Kutan lupus erythematosus

DEFF Research Database (Denmark)

Sandreva, Tatjana; Voss, Anne; Bygum, Anette

2016-01-01

Cutaneous lupus erythematosus (LE) is an autoimmune disease. The most common clinical forms are acute cutaneous LE (ACLE), subacute cutaneous LE (SCLE) and discoid LE (DLE). Cutaneous LE, mainly ACLE, can be the first sign of systemic LE (SLE). DLE and SCLE are less associated with development...

Evolutionary enhancement of the SLIM-MAUD method of estimating human error rates

International Nuclear Information System (INIS)

Zamanali, J.H.; Hubbard, F.R.; Mosleh, A.; Waller, M.A.

1992-01-01

The methodology described in this paper assigns plant-specific dynamic human error rates (HERs) for individual plant examinations based on procedural difficulty, on configuration features, and on the time available to perform the action. This methodology is an evolutionary improvement of the success likelihood index methodology (SLIM-MAUD) for use in systemic scenarios. It is based on the assumption that the HER in a particular situation depends of the combined effects of a comprehensive set of performance-shaping factors (PSFs) that influence the operator's ability to perform the action successfully. The PSFs relate the details of the systemic scenario in which the action must be performed according to the operator's psychological and cognitive condition

Kutan lupus erythematosus

DEFF Research Database (Denmark)

Sandreva, Tatjana; Voss, Anne; Bygum, Anette

2016-01-01

Cutaneous lupus erythematosus (LE) is an autoimmune disease. The most common clinical forms are acute cutaneous LE (ACLE), subacute cutaneous LE (SCLE) and discoid LE (DLE). Cutaneous LE, mainly ACLE, can be the first sign of systemic LE (SLE). DLE and SCLE are less associated with development of...... hydroxychloroquine....

Evaluation of the information servicing in a distributed learning ...

African Journals Online (AJOL)

The authors' main idea is to organize a distributed learning environment (DLE) based on information and communication resources of global network in combination with the technologies for virtual reality and 3D simulation. In this reason a conceptual model of the DLE architecture and learning processes is defined, and ...

Genetic similarities and differences between discoid and systemic lupus erythematosus patients within the Polish population

Directory of Open Access Journals (Sweden)

Katarzyna Skonieczna

2017-05-01

Full Text Available Introduction: Many studies have shown that some SNPs might be a risk factor for systemic lupus erythematosus (SLE, but little is known about potential susceptibility loci of the skin types of the disease. Discoid lupus erythematosus (DLE is the most common form of the cutaneous lupus erythematosus. Nevertheless, a genetic contribution to DLE is not fully recognized. Aim: We aimed to analyze three SNPs located in the STAT4 (rs7574865, ITGAM (rs1143679 and TNXB (rs1150754 genes in both DLE and SLE patients from Poland. Material and methods: SNPs were genotyped using real-time polymerase chain reaction (PCR. Statistical significance of the differences between patient and control groups in both allele and genotype frequencies were calculated using two tailed Fisher’s exact test. The correction for multiple testing by the Bonferroni adjustment and odds ratio were also calculated. Results : For the first time, we have shown that the polymorphisms located in the STAT4 (rs7574865, but not in the ITGAM (rs1143679 nor the TNXB (rs1150754 genes, might be associated with the development of DLE within the Polish population. The variation of the three investigated SNPs was found to be associated with SLE in our dataset. Conclusions : The results of our study suggest differences in the molecular background between DLE and SLE within the Polish population.

On soft clipping of Zernike moments for deblurring and enhancement of optical point spread functions

Science.gov (United States)

Becherer, Nico; Jödicke, Hanna; Schlosser, Gregor; Hesser, Jürgen; Zeilfelder, Frank; Männer, Reinhard

2006-02-01

Blur and noise originating from the physical imaging processes degrade the microscope data. Accurate deblurring techniques require, however, an accurate estimation of the underlying point-spread function (PSF). A good representation of PSFs can be achieved by Zernike Polynomials since they offer a compact representation where low-order coefficients represent typical aberrations of optical wavefronts while noise is represented in higher order coefficients. A quantitative description of the noise distribution (Gaussian) over the Zernike moments of various orders is given which is the basis for the new soft clipping approach for denoising of PSFs. Instead of discarding moments beyond a certain order, those Zernike moments that are more sensitive to noise are dampened according to the measured distribution and the present noise model. Further, a new scheme to combine experimental and theoretical PSFs in Zernike space is presented. According to our experimental reconstructions, using the new improved PSF the correlation between reconstructed and original volume is raised by 15% on average cases and up to 85% in the case of thin fibre structures, compared to reconstructions where a non improved PSF was used. Finally, we demonstrate the advantages of our approach on 3D images of confocal microscopes by generating visually improved volumes. Additionally, we are presenting a method to render the reconstructed results using a new volume rendering method that is almost artifact-free. The new approach is based on a Shear-Warp technique, wavelet data encoding techniques and a recent approach to approximate the gray value distribution by a Super spline model.

Prognostic implications of active discoid lupus erythematosus and malar rash at the time of diagnosis of systemic lupus erythematosus: Results from a prospective cohort study.

Science.gov (United States)

Drucker, A M; Su, J; Mussani, F; Siddha, S K; Gladman, D D; Urowitz, M B

2016-04-01

Cutaneous lupus erythematosus (CLE) may have prognostic implications for systemic lupus erythematosus (SLE). We aimed to determine the impact of discoid lupus erythematosus (DLE) and malar rash on SLE disease activity. Data were analyzed from the Toronto Lupus Clinic prospective cohort study. We compared SLE patients with active DLE or malar rash at SLE diagnosis to SLE patients who never developed CLE. Outcomes were assessed at one and five years, including Adjusted Mean Systemic Lupus Erythematosus Disease Activity Index 2000 (AMS). A total of 524 SLE patients (284 without CLE, 65 with DLE, and 175 with malar rash) were included. Mean AMS scores in patients without CLE at one and five years were 5.96 ± 5.06 and 4.00 ± 3.52, which did not differ significantly from scores at one (6.93 ± 5.31, p = 0.17) and five years (4.29 ± 2.62, p = 0.63) in the DLE group. In patients with malar rash, AMS scores at one (8.30 ± 6.80, p < 0.001) and five years (5.23 ± 3.06, p = 0.004) were higher than controls without CLE. Malar rash may be a marker of more severe systemic disease over time, while DLE has no significant impact on general SLE disease activity. © The Author(s) 2015.

Dynamics of the deep-level emission in ZnO nanowires

Energy Technology Data Exchange (ETDEWEB)

Hou, Dongchao; Rueckmann, Ilja; Voss, Tobias [Institut fuer Festkoerperphysik, Universitaet Bremen (Germany)

2010-07-01

Due to its wide direct band gap and large exciton binding energy (60 meV), ZnO nanowires possess an efficient near band-edge emission (NBE) in UV range. Additional energy levels in the band gap of ZnO, commonly introduced by point defects such as oxygen or zinc vacancies and Cu impurities, can largely weaken the UV emission by providing extra recombination routes for the electrons in conduction band. In ZnO nanowires this deep-level emission band (DLE) is expected to be largely activated by tunneling processes of holes trapped in the surface depletion layer after optical excitation. We studied the dependence of the DLE and NBE intensities of ZnO nanowires on the excitation power at different temperatures. For the experiments, the fundamental (1064 nm) and frequency-tripled (355 nm) pulses of an Nd:YAG microchip laser were used. The additional infrared laser radiation was used to directly populate the defect levels with electrons from the valence band. Our results show that the additional infrared photons lead to a reduction of the DLE while the NBE is enhanced. We discuss the implications of our results for the models of DLE in ZnO nanowires.

Science-based HRA: experimental comparison of operator performance to IDAC (Information-Decision-Action Crew) simulations

Energy Technology Data Exchange (ETDEWEB)

Shirley, Rachel [The Ohio State Univ., Columbus, OH (United States); Smidts, Carol [The Ohio State Univ., Columbus, OH (United States); Boring, Ronald [Idaho National Lab. (INL), Idaho Falls, ID (United States); Li, Yuandan [Univ. of Maryland, College Park, MD (United States); Mosleh, Ali [Univ. of Maryland, College Park, MD (United States)

2015-02-01

Information-Decision-Action Crew (IDAC) operator model simulations of a Steam Generator Tube Rupture are compared to student operator performance in studies conducted in the Ohio State University’s Nuclear Power Plant Simulator Facility. This study is presented as a prototype for conducting simulator studies to validate key aspects of Human Reliability Analysis (HRA) methods. Seven student operator crews are compared to simulation results for crews designed to demonstrate three different decision-making strategies. The IDAC model used in the simulations is modified slightly to capture novice behavior rather that expert operators. Operator actions and scenario pacing are compared. A preliminary review of available performance shaping factors (PSFs) is presented. After the scenario in the NPP Simulator Facility, student operators review a video of the scenario and evaluate six PSFs at pre-determined points in the scenario. This provides a dynamic record of the PSFs experienced by the OSU student operators. In this preliminary analysis, Time Constraint Load (TCL) calculated in the IDAC simulations is compared to TCL reported by student operators. We identify potential modifications to the IDAC model to develop an “IDAC Student Operator Model.” This analysis provides insights into how similar experiments could be conducted using expert operators to improve the fidelity of IDAC simulations.

Preparation of basil seed mucilage aerogels loaded with paclitaxel nanoparticles by the combination of phase inversion technique and gas antisolvent process

Directory of Open Access Journals (Sweden)

Seyyed Ghoreishi

2017-09-01

Full Text Available Objective(S: In this work, paclitaxel (PX, a promising anticancer drug, was loaded in the basil seed mucilage (BSM aerogels by implementation of supercritical carbon dioxide (SC-CO2 technology. Then, the effects of operating conditions were studied on the PX mean particle size (MPS, particle size distribution (PSD and drug loading efficiency (DLE. Methods: The employed SC-CO2 process in this research is the combination of phase inversion technique and gas antisolvent (GAS process. The effect of DMSO/water ratio (4 and 6 (v/v, pressure (10-20 MPa, CO2 addition rate (1–3 mL/min and ethanol concentration (5-10% were studied on MPS, PSD and DLE. Scanning electron microscopy (SEM and Zetasizer were used for particle analysis. DLE was investigated by utilizing the high-performance liquid chromatography (HPLC. Results: Nanoparticles of paclitaxel (MPS of 82–131 nm depending on process variables with narrow PSD were successfully loaded in BSM aerogel with DLE of 28–52%. Experimental results indicated that higher DMSO/water ratio, ethanol concentration, pressure and CO2 addition rate reduced MPS and DLE. Conclusions: A modified semi batch SC-CO2 process based on the combination of gas antisolvent process and phase inversion methods using DMSO as co-solvent and ethanol as a secondary solvent was developed for the loading of an anticancer drug, PX, in ocimum basilicum mucilage aerogel. The experimental results determined that the mean particle size, particle size distribution, and drug loading efficiency be controlled with operating conditions.

Statistical Results Concerning the Precision of the Methods of Correlation and Interpolation Sub-Pixel Used in Video PIV

Science.gov (United States)

1998-08-27

serait compI~ men - taire du logiciel "ferm6" du sysf~me dle PlY commercial et qui permettrait d𔄀tudier la pr6cision des math odes dle traitement...de rNaxNt piels antu pourts chauepixelr un nivea des grnis contaont (modanlisa iped 0.5 - R0 .2/9 0.570 Simulations num6riques par une repr~sentation

Long-term response to hydroxychloroquine in patients with discoid lupus erythematosus.

Science.gov (United States)

Wahie, S; Meggitt, S J

2013-09-01

The recommended first-line oral therapy for discoid lupus erythematosus (DLE) is the antimalarial hydroxychloroquine. To the best of our knowledge, there is no published information regarding the long-term (i.e. > 6 months) response of DLE to hydroxychloroquine in clinical practice. To describe the long-term clinical response of DLE to hydroxychloroquine after 6 months of use. A multicentre retrospective cohort study was conducted in patients with DLE who had received treatment with hydroxychloroquine. All patients were recruited and interviewed by a single investigator and response to hydroxychloroquine assessed by the same individual through a retrospective review of case notes using a specified protocol. A total of 200 patients with DLE were recruited (F:M = 4 : 1) with a median age at diagnosis of 40 years (range 16-81) and median follow-up of 8 years (range 0·5-37). An adequate clinical response to hydroxychloroquine was recorded in 91 patients (45·5%) but nonresponse occurred in 85 patients (42·5%). The remainder of patients either had partial response or withdrew from therapy due to toxicity or were unclassifiable. Importantly, of those individuals that did respond to hydroxychloroquine within the first 6 months of use, almost one in five eventually lost their response, despite continued administration, after a median interval of 2 years. These patients often regained disease control if treated with a combination of hydroxychloroquine and mepacrine. Of those that did not respond to hydroxychloroquine within the first 6 months of use, almost one in 10 became eventual responders either after continued administration for up to 2 years or when rechallenged on hydroxychloroquine. The remaining nonresponders relied frequently on oral corticosteroid. In this cohort of patients with DLE, long-term clinical response to hydroxychloroquine occurred in less than 50% of patients. Nonresponders to hydroxychloroquine frequently required oral steroid to achieve disease

Human Resource Management in Professional Services Firms: Too Good to be True?

DEFF Research Database (Denmark)

Bévort, Frans; Poulfelt, Flemming

2015-01-01

? This paper analyzes the ways HR specialists and PSF managers/partners differ in their understanding of organizations and their management. The analysis supports the argument that, while HR specialists and the discipline of HRM are governed by bureaucratic logic in their approach to management, PSF managers...... of institutional logics to HRM practice in PSFs. The paper builds on interviews with five HR managers who have held positions in PSFs, as well as a longitudinal case study of PSF managers in one of the 'Big Four' accounting firms. The paper offers a number of tentative proposals around how HRM and PSFs might...... transcend the described gulf between the two approaches to management....

Distribution and Fate of Energetics on DoD Test and Training Ranges: Interim Report 6

Science.gov (United States)

2006-11-01

Applied Research Associates, Inc.). The objective of this project was to develop a low-cost, fieldable process for the rapid decontamination of...DLE. Moreover, the DLE mandate includes the analysis of other types of range contaminants such as heavy metals, petroleum products, and radioactive ...ground material with a small stainless spatula and combined in a 2-oz amber jar with a Teflon-lined lid. In the case of the 12 samples selected for the

A real-time assessment of factors influencing medication events.

Science.gov (United States)

Dollarhide, Adrian W; Rutledge, Thomas; Weinger, Matthew B; Fisher, Erin Stucky; Jain, Sonia; Wolfson, Tanya; Dresselhaus, Timothy R

2014-01-01

Reducing medical error is critical to improving the safety and quality of healthcare. Physician stress, fatigue, and excessive workload are performance-shaping factors (PSFs) that may influence medical events (actual administration errors and near misses), but direct relationships between these factors and patient safety have not been clearly defined. This study assessed the real-time influence of emotional stress, workload, and sleep deprivation on self-reported medication events by physicians in academic hospitals. During an 18-month study period, 185 physician participants working at four university-affiliated teaching hospitals reported medication events using a confidential reporting application on handheld computers. Emotional stress scores, perceived workload, patient case volume, clinical experience, total sleep, and demographic variables were also captured via the handheld computers. Medication event reports (n = 11) were then correlated with these demographic and PSFs. Medication events were associated with 36.1% higher perceived workload (p sleep (p = .10). These results confirm the effect of factors influencing medication events, and support attention to both provider and hospital environmental characteristics for improving patient safety. © 2013 National Association for Healthcare Quality.

Explaining Gender Gaps in English Composition and College Algebra in College: The Mediating Role of Psychosocial Factors

Science.gov (United States)

Ndum, Edwin; Allen, Jeff; Way, Jason; Casillas, Alex

2018-01-01

We examined the role of six psychosocial factors (PSFs) in explaining gender gaps in English Composition (n = 8,633) and College Algebra (n = 2,261) using data of first-year female (55%) and male students from 42 colleges. Using a multilevel model and controlling for prior achievement, we found that PSFs mediated between 3% and 41% of the gender…

A statistical approach to estimating effects of performance shaping factors on human error probabilities of soft controls

International Nuclear Information System (INIS)

Kim, Yochan; Park, Jinkyun; Jung, Wondea; Jang, Inseok; Hyun Seong, Poong

2015-01-01

Despite recent efforts toward data collection for supporting human reliability analysis, there remains a lack of empirical basis in determining the effects of performance shaping factors (PSFs) on human error probabilities (HEPs). To enhance the empirical basis regarding the effects of the PSFs, a statistical methodology using a logistic regression and stepwise variable selection was proposed, and the effects of the PSF on HEPs related with the soft controls were estimated through the methodology. For this estimation, more than 600 human error opportunities related to soft controls in a computerized control room were obtained through laboratory experiments. From the eight PSF surrogates and combinations of these variables, the procedure quality, practice level, and the operation type were identified as significant factors for screen switch and mode conversion errors. The contributions of these significant factors to HEPs were also estimated in terms of a multiplicative form. The usefulness and limitation of the experimental data and the techniques employed are discussed herein, and we believe that the logistic regression and stepwise variable selection methods will provide a way to estimate the effects of PSFs on HEPs in an objective manner. - Highlights: • It is necessary to develop an empirical basis for the effects of the PSFs on the HEPs. • A statistical method using a logistic regression and variable selection was proposed. • The effects of PSFs on the HEPs of soft controls were empirically investigated. • The significant factors were identified and their effects were estimated

Human performance modeling for system of systems analytics: combat performance-shaping factors.

Energy Technology Data Exchange (ETDEWEB)

Lawton, Craig R.; Miller, Dwight Peter

2006-01-01

The US military has identified Human Performance Modeling (HPM) as a significant requirement and challenge of future systems modeling and analysis initiatives. To support this goal, Sandia National Laboratories (SNL) has undertaken a program of HPM as an integral augmentation to its system-of-system (SoS) analytics capabilities. The previous effort, reported in SAND2005-6569, evaluated the effects of soldier cognitive fatigue on SoS performance. The current effort began with a very broad survey of any performance-shaping factors (PSFs) that also might affect soldiers performance in combat situations. The work included consideration of three different approaches to cognition modeling and how appropriate they would be for application to SoS analytics. This bulk of this report categorizes 47 PSFs into three groups (internal, external, and task-related) and provides brief descriptions of how each affects combat performance, according to the literature. The PSFs were then assembled into a matrix with 22 representative military tasks and assigned one of four levels of estimated negative impact on task performance, based on the literature. Blank versions of the matrix were then sent to two ex-military subject-matter experts to be filled out based on their personal experiences. Data analysis was performed to identify the consensus most influential PSFs. Results indicate that combat-related injury, cognitive fatigue, inadequate training, physical fatigue, thirst, stress, poor perceptual processing, and presence of chemical agents are among the PSFs with the most negative impact on combat performance.

A rare case of unilateral discoid lupus erythematosus mimicking lupus vulgaris.

Science.gov (United States)

Verma, Parul; Pathania, Sucheta; Kubba, Asha

2017-11-08

Discoidlupus erythematosus (DLE) is a chronic type of cutaneous lupus erythematosus which can present in various morphologies, and the diagnosis can be rather confounding. Prompt evaluation and treatment is necessary to prevent disfigurement and systemic involvement associated with DLE. The following case presented a diagnostic dilemma as the lesion mimicked lupus vulgaris. © BMJ Publishing Group Ltd (unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Výroba přírub s využitím postupu PPAP a normy ISO 9001

OpenAIRE

Prokeš, Tomáš

2016-01-01

První část diplomové práce se zabývá problematikou zavedení systému managementu jakosti v malém podniku dle normy ISO 9001, následně procesem schvalování součásti do sériové výroby dle metodiky PPAP. V této části jsou řešeny především požadavky normy ISO 9001, statistická kontrola výroby a samotná certifikace podniku dle normy ISO 9001. Druhá část je zaměřena na problematiku sériové výroby příruby, za využití technologického zázemí společnosti Kovosobotka. V závěru práce jsou zohledněny i ned...

Paenibacillus oenotherae sp. nov. and Paenibacillus hemerocallicola sp. nov., isolated from the roots of herbaceous plants.

Science.gov (United States)

Kim, Tae-Su; Han, Ji-Hye; Joung, Yochan; Kim, Seung Bum

2015-08-01

Two Gram-staining-positive, aerobic, endospore-forming, motile bacteria, strains DT7-4T and DLE-12T, were isolated from roots of evening primrose (Oenothera biennis) and day lily (Hemerocallis fulva), respectively, and subjected to taxonomic characterization. Analysis of 16S rRNA gene sequences indicated that the two strains fell into two distinct phylogenetic clusters belonging to the genus Paenibacillus. Strain DT7-4T was most closely related to Paenibacillus phyllosphaerae PALXIL04T and Paenibacillus taihuensis THMBG22T, with 96.3% 16S rRNA gene sequence similarity to each, and strain DLE-12T was most closely related to Paenibacillus ginsengarvi Gsoil 139T and Paenibacillus hodogayensis SGT, with 96.6 and 93.3% sequence similarity, respectively. Both isolates contained anteiso-C15 : 0 as the dominant fatty acid, meso-diaminopimelic acid as the diagnostic diamino acid in the cell-wall peptidoglycan and MK-7 as the respiratory menaquinone. The cellular polar lipids were composed of diphosphatidylglycerol, phosphatidylethanolamine, phosphatidylglycerol and unidentified polar lipids. The DNA G+C contents of strains DT7-4T and DLE-12T were 50.1 ± 0.7 and 55.2 ± 0.5 mol%, respectively. The chemotaxonomic properties of both isolates were typical of members of the genus Paenibacillus. However, our biochemical and phylogenetic analyses distinguished each isolate from related species. Based on our polyphasic taxonomic analysis, strains DT7-4T and DLE-12T should be recognized as representatives of novel species of Paenibacillus, for which the names Paenibacillus oenotherae sp. nov. (type strain DT7-4T = KCTC 33186T = JCM 19573T) and Paenibacillus hemerocallicola sp. nov. (type strain DLE-12T = KCTC 33185T = JCM 19572T) are proposed.

A Review of Various Performance Shaping Factors for Use in Advanced Control Rooms

International Nuclear Information System (INIS)

Lee, Seung Woo; Ha, Jun Su; Seong, Poong Hyun; Park, Jae Hyuk; Kim, Ja Kyung

2009-01-01

Human reliability analysis(HRA) has been performed as part of the probabilistic risk assessment to identify and quantify human actions and the associated impacts on structures, systems and components for a complex facility. Currently, representative HRA methods such as THERP, ASEP HRA and HCR are being used in Korea. In performing HRA, such conditions that influence human performances have been represented via several context factors. These context factors are referred to by different terms according to method: PSF(Performance Shaping Factors), PIF(Performance Influencing Factors), PAF(Performance Affecting Factors, EPC(Error Producing Conditions), CPC(Common Performance Conditions), and so on. These context factors which will be called PSFs in this study are used in adjusting the basic human error probability(BHEP). However, these PSFs need to be re-assessed since the context is expected to change due to the implementation of computer technologies in NPP. In this study, various PSFs used in different HRA methods are reviewed and PSFs which are frequently mentioned as important factors are derived. Also, HF(Human Factor) issues with one of the design characteristics of advanced NPP are identified

Effects of Doping with Al, Ga, and In on Structural and Optical Properties of ZnO Nanorods Grown by Hydrothermal Method

International Nuclear Information System (INIS)

Kim, Soaram; Nam, Giwoong; Park, Hyunggil; Yoon, Hyunsik; Leem, Jaeyoung; Lee, Sangheon; Kim, Jong Su; Kim, Jin Soo; Kim, Do Yeob; Kim, Sungo

2013-01-01

The structural and optical properties of the ZnO, Al-doped ZnO, Ga-doped ZnO, and In-doped ZnO nanorods were investigated using field-emission scanning electron microscopy, X-ray diffraction, photoluminescence (PL) and ultraviolet-visible spectroscopy. All the nanorods grew with good alignment on the ZnO seed layers and the ZnO nanorod dimensions could be controlled by the addition of the various dopants. For instance, the diameter of the nanorods decreased with increasing atomic number of the dopants. The ratio between the near-band-edge emission (NBE) and the deep-level emission (DLE) intensities (I NBE /I DLE ) obtained by PL gradually decreased because the DLE intensity from the nanorods gradually increased with increase in the atomic number of the dopants. We found that the dopants affected the structural and optical properties of the ZnO nanorods including their dimensions, lattice constants, residual stresses, bond lengths, PL properties, transmittance values, optical band gaps, and Urbach energies

Effects of Doping with Al, Ga, and In on Structural and Optical Properties of ZnO Nanorods Grown by Hydrothermal Method

Energy Technology Data Exchange (ETDEWEB)

Kim, Soaram; Nam, Giwoong; Park, Hyunggil; Yoon, Hyunsik; Leem, Jaeyoung [Inje Univ., Gimhae (Korea, Republic of); Lee, Sangheon; Kim, Jong Su [Yeungnam Univ., Gyeongsan (Korea, Republic of); Kim, Jin Soo [Chonbuk National Univ., Jeonju (Korea, Republic of); Kim, Do Yeob; Kim, Sungo [Clemson Univ., Clemson (United States)

2013-04-15

The structural and optical properties of the ZnO, Al-doped ZnO, Ga-doped ZnO, and In-doped ZnO nanorods were investigated using field-emission scanning electron microscopy, X-ray diffraction, photoluminescence (PL) and ultraviolet-visible spectroscopy. All the nanorods grew with good alignment on the ZnO seed layers and the ZnO nanorod dimensions could be controlled by the addition of the various dopants. For instance, the diameter of the nanorods decreased with increasing atomic number of the dopants. The ratio between the near-band-edge emission (NBE) and the deep-level emission (DLE) intensities (I{sub NBE}/I{sub DLE}) obtained by PL gradually decreased because the DLE intensity from the nanorods gradually increased with increase in the atomic number of the dopants. We found that the dopants affected the structural and optical properties of the ZnO nanorods including their dimensions, lattice constants, residual stresses, bond lengths, PL properties, transmittance values, optical band gaps, and Urbach energies.

The point-spread function measure of resolution for the 3-D electrical resistivity experiment

Science.gov (United States)

Oldenborger, Greg A.; Routh, Partha S.

2009-02-01

The solution appraisal component of the inverse problem involves investigation of the relationship between our estimated model and the actual model. However, full appraisal is difficult for large 3-D problems such as electrical resistivity tomography (ERT). We tackle the appraisal problem for 3-D ERT via the point-spread functions (PSFs) of the linearized resolution matrix. The PSFs represent the impulse response of the inverse solution and quantify our parameter-specific resolving capability. We implement an iterative least-squares solution of the PSF for the ERT experiment, using on-the-fly calculation of the sensitivity via an adjoint integral equation with stored Green's functions and subgrid reduction. For a synthetic example, analysis of individual PSFs demonstrates the truly 3-D character of the resolution. The PSFs for the ERT experiment are Gaussian-like in shape, with directional asymmetry and significant off-diagonal features. Computation of attributes representative of the blurring and localization of the PSF reveal significant spatial dependence of the resolution with some correlation to the electrode infrastructure. Application to a time-lapse ground-water monitoring experiment demonstrates the utility of the PSF for assessing feature discrimination, predicting artefacts and identifying model dependence of resolution. For a judicious selection of model parameters, we analyse the PSFs and their attributes to quantify the case-specific localized resolving capability and its variability over regions of interest. We observe approximate interborehole resolving capability of less than 1-1.5m in the vertical direction and less than 1-2.5m in the horizontal direction. Resolving capability deteriorates significantly outside the electrode infrastructure.

Radiation distribution measurement using plastic scintillating optical fibers for survey of radioactive contamination in wide area

International Nuclear Information System (INIS)

Ito, Chikara; Ito, Keisuke; Ishikawa, Takashi; Yoshida, Akihiro; Sanada, Yukihisa; Torii, Tatsuo; Nohtomi, Akihiro; Wakabayashi, Genichiro; Miyazaki, Nobuyuki

2013-01-01

It is important to examine distribution of environmental contamination due to the accident of Fukushima Daiichi Nuclear Power Station and to confirm the effect of decontamination works. We have applied radiation distribution measurement using plastic scintillating optical fibers (PSFs) in the survey of contamination in wide area including residential, farmland, forests, etc. In the measurements system, two scintillation lights that emitted at an incidence of a radiation transmit to photomultiplier tubes at the both end of PSFs. The position where scintillation light emitted is obtained from the detection time difference of each photomultiplier tube. The distribution of light emission quantity indicates the distribution of radiation incident in a PSF which is corresponds to the distribution of dose-rate. The radiation detection system using the PSFs has been applied to the radiation distribution measurement on grounds, trees, etc. The results show a good agreement with point data measured by survey meters using sodium iodide scintillators. As the PSFs which have water resistance, they have been successfully applied to the radiation distribution measurement in the river. We have also succeeded in measuring two-dimensional distribution of radiation by measuring the count rate while moving to the fiber at a constant speed. (author)

Isotope specific resolution recovery image reconstruction in high resolution PET imaging

Energy Technology Data Exchange (ETDEWEB)

Kotasidis, Fotis A. [Division of Nuclear Medicine and Molecular Imaging, Geneva University Hospital, CH-1211 Geneva, Switzerland and Wolfson Molecular Imaging Centre, MAHSC, University of Manchester, M20 3LJ, Manchester (United Kingdom); Angelis, Georgios I. [Faculty of Health Sciences, Brain and Mind Research Institute, University of Sydney, NSW 2006, Sydney (Australia); Anton-Rodriguez, Jose; Matthews, Julian C. [Wolfson Molecular Imaging Centre, MAHSC, University of Manchester, Manchester M20 3LJ (United Kingdom); Reader, Andrew J. [Montreal Neurological Institute, McGill University, Montreal QC H3A 2B4, Canada and Department of Biomedical Engineering, Division of Imaging Sciences and Biomedical Engineering, King' s College London, St. Thomas’ Hospital, London SE1 7EH (United Kingdom); Zaidi, Habib [Division of Nuclear Medicine and Molecular Imaging, Geneva University Hospital, CH-1211 Geneva (Switzerland); Geneva Neuroscience Centre, Geneva University, CH-1205 Geneva (Switzerland); Department of Nuclear Medicine and Molecular Imaging, University of Groningen, University Medical Center Groningen, PO Box 30 001, Groningen 9700 RB (Netherlands)

2014-05-15

Purpose: Measuring and incorporating a scanner-specific point spread function (PSF) within image reconstruction has been shown to improve spatial resolution in PET. However, due to the short half-life of clinically used isotopes, other long-lived isotopes not used in clinical practice are used to perform the PSF measurements. As such, non-optimal PSF models that do not correspond to those needed for the data to be reconstructed are used within resolution modeling (RM) image reconstruction, usually underestimating the true PSF owing to the difference in positron range. In high resolution brain and preclinical imaging, this effect is of particular importance since the PSFs become more positron range limited and isotope-specific PSFs can help maximize the performance benefit from using resolution recovery image reconstruction algorithms. Methods: In this work, the authors used a printing technique to simultaneously measure multiple point sources on the High Resolution Research Tomograph (HRRT), and the authors demonstrated the feasibility of deriving isotope-dependent system matrices from fluorine-18 and carbon-11 point sources. Furthermore, the authors evaluated the impact of incorporating them within RM image reconstruction, using carbon-11 phantom and clinical datasets on the HRRT. Results: The results obtained using these two isotopes illustrate that even small differences in positron range can result in different PSF maps, leading to further improvements in contrast recovery when used in image reconstruction. The difference is more pronounced in the centre of the field-of-view where the full width at half maximum (FWHM) from the positron range has a larger contribution to the overall FWHM compared to the edge where the parallax error dominates the overall FWHM. Conclusions: Based on the proposed methodology, measured isotope-specific and spatially variant PSFs can be reliably derived and used for improved spatial resolution and variance performance in resolution

Isotope specific resolution recovery image reconstruction in high resolution PET imaging

International Nuclear Information System (INIS)

Kotasidis, Fotis A.; Angelis, Georgios I.; Anton-Rodriguez, Jose; Matthews, Julian C.; Reader, Andrew J.; Zaidi, Habib

2014-01-01

Purpose: Measuring and incorporating a scanner-specific point spread function (PSF) within image reconstruction has been shown to improve spatial resolution in PET. However, due to the short half-life of clinically used isotopes, other long-lived isotopes not used in clinical practice are used to perform the PSF measurements. As such, non-optimal PSF models that do not correspond to those needed for the data to be reconstructed are used within resolution modeling (RM) image reconstruction, usually underestimating the true PSF owing to the difference in positron range. In high resolution brain and preclinical imaging, this effect is of particular importance since the PSFs become more positron range limited and isotope-specific PSFs can help maximize the performance benefit from using resolution recovery image reconstruction algorithms. Methods: In this work, the authors used a printing technique to simultaneously measure multiple point sources on the High Resolution Research Tomograph (HRRT), and the authors demonstrated the feasibility of deriving isotope-dependent system matrices from fluorine-18 and carbon-11 point sources. Furthermore, the authors evaluated the impact of incorporating them within RM image reconstruction, using carbon-11 phantom and clinical datasets on the HRRT. Results: The results obtained using these two isotopes illustrate that even small differences in positron range can result in different PSF maps, leading to further improvements in contrast recovery when used in image reconstruction. The difference is more pronounced in the centre of the field-of-view where the full width at half maximum (FWHM) from the positron range has a larger contribution to the overall FWHM compared to the edge where the parallax error dominates the overall FWHM. Conclusions: Based on the proposed methodology, measured isotope-specific and spatially variant PSFs can be reliably derived and used for improved spatial resolution and variance performance in resolution

Isotope specific resolution recovery image reconstruction in high resolution PET imaging.

Science.gov (United States)

Kotasidis, Fotis A; Angelis, Georgios I; Anton-Rodriguez, Jose; Matthews, Julian C; Reader, Andrew J; Zaidi, Habib

2014-05-01

Measuring and incorporating a scanner-specific point spread function (PSF) within image reconstruction has been shown to improve spatial resolution in PET. However, due to the short half-life of clinically used isotopes, other long-lived isotopes not used in clinical practice are used to perform the PSF measurements. As such, non-optimal PSF models that do not correspond to those needed for the data to be reconstructed are used within resolution modeling (RM) image reconstruction, usually underestimating the true PSF owing to the difference in positron range. In high resolution brain and preclinical imaging, this effect is of particular importance since the PSFs become more positron range limited and isotope-specific PSFs can help maximize the performance benefit from using resolution recovery image reconstruction algorithms. In this work, the authors used a printing technique to simultaneously measure multiple point sources on the High Resolution Research Tomograph (HRRT), and the authors demonstrated the feasibility of deriving isotope-dependent system matrices from fluorine-18 and carbon-11 point sources. Furthermore, the authors evaluated the impact of incorporating them within RM image reconstruction, using carbon-11 phantom and clinical datasets on the HRRT. The results obtained using these two isotopes illustrate that even small differences in positron range can result in different PSF maps, leading to further improvements in contrast recovery when used in image reconstruction. The difference is more pronounced in the centre of the field-of-view where the full width at half maximum (FWHM) from the positron range has a larger contribution to the overall FWHM compared to the edge where the parallax error dominates the overall FWHM. Based on the proposed methodology, measured isotope-specific and spatially variant PSFs can be reliably derived and used for improved spatial resolution and variance performance in resolution recovery image reconstruction. The

Advanced methods and algorithm for high precision astronomical imaging

International Nuclear Information System (INIS)

Ngole-Mboula, Fred-Maurice

2016-01-01

One of the biggest challenges of modern cosmology is to gain a more precise knowledge of the dark energy and the dark matter nature. Fortunately, the dark matter can be traced directly through its gravitational effect on galaxies shapes. The European Spatial Agency Euclid mission will precisely provide data for such a purpose. A critical step is analyzing these data will be to accurately model the instrument Point Spread Function (PSF), which the focus of this thesis.We developed non parametric methods to reliably estimate the PSFs across an instrument field-of-view, based on unresolved stars images and accounting for noise, under sampling and PSFs spatial variability. At the core of these contributions, modern mathematical tools and concepts such as sparsity. An important extension of this work will be to account for the PSFs wavelength dependency. (author) [fr

Optical and electrical improvements of semipolar (1 1 −2 2) GaN-based light emitting diodes by Si doping of n-GaN template

International Nuclear Information System (INIS)

Lee, Jae-Hwan; Han, Sang-Hyun; Song, Ki-Ryong; Lee, Sung-Nam

2014-01-01

Highlights: • In semipolar GaN, Si-doping is effective to reduce out-of plane PSFs toward [1−100]. • Interfacial quality of semipolar QWs was improved by increasing SiH4 flow of n-GaN. • Electrical properties of semipolar GaN were improved by increasing Si doping. • Light output power of semipolar LEDs were increased with SiH4 flow rate of n-type GaN. - Abstract: We report that the performance of semipolar (1 1 −2 2) GaN-based light-emitting diodes (LEDs) was improved by increasing the Si-doping concentration of n-type GaN templates. In-plane and out-of plane high-resolution X-ray diffraction demonstrated that crystal defects such as threading dislocation, partial stacking faults and basal stacking faults, were significantly decreased by increasing the Si-doping concentration. This resulted in the increase of carrier mobility due to reduction of the defect-scattering effect. Furthermore, the quality of InGaN/GaN quantum-well interfaces was improved by increasing the Si-doping concentration of the n-type GaN template. Based on these results, we suggest that the light-output power and operation voltage of semipolar (1 1 −2 2) GaN-based LEDs would be improved by increasing Si doping concentration of n-type GaN templates

Impact of error management culture on knowledge performance in professional service firms

Directory of Open Access Journals (Sweden)

Tabea Scheel

2014-01-01

Full Text Available Knowledge is the most crucial resource of the 21st century. For professional service firms (PSFs, knowledge represents the input as well as the output, and thus the fundamental base for performance. As every organization, PSFs have to deal with errors – and how they do that indicates their error culture. Considering the positive potential of errors (e.g., innovation, error management culture is positively related to organizational performance. This longitudinal quantitative study investigates the impact of error management culture on knowledge performance in four waves. The study was conducted in 131 PSFs, i.e. tax accounting offices. As a standard quality management system (QMS was assumed to moderate the relationship between error management culture and knowledge performance, offices' ISO 9000 certification was assessed. Error management culture correlated positively with knowledge performance at a significant level and predicted knowledge performance one year later. While the ISO 9000 certification correlated positively with knowledge performance, its assumed moderation of the relationship between error management culture and knowledge performance was not consistent. The process-oriented QMS seems to function as facilitator for the more behavior-oriented error management culture. However, the benefit of ISO 9000 certification for tax accounting remains to be proven. Given the impact of error management culture on knowledge performance, PSFs should focus on actively promoting positive attitudes towards errors.

Bacterial Preferences for Specific Soil Particle Size Fractions Revealed by Community Analyses

DEFF Research Database (Denmark)

Hemkemeyer, Michael; Dohrmann, Anja B.; Christensen, Bent Tolstrup

2018-01-01

Genetic fingerprinting demonstrated in previous studies that differently sized soil particle fractions (PSFs; clay, silt, and sand with particulate organic matter (POM)) harbor microbial communities that differ in structure, functional potentials and sensitivity to environmental conditions....... To elucidate whether specific bacterial or archaeal taxa exhibit preference for specific PSFs, we examined the diversity of PCR-amplified 16S rRNA genes by high-throughput sequencing using total DNA extracted from three long-term fertilization variants (unfertilized, fertilized with minerals, and fertilized...

Implications of an HRA framework for quantifying human acts of commission and dependency: Development of a methodology for conducting an integrated HRA/PRA

International Nuclear Information System (INIS)

Barriere, M.T.; Luckas, W.J.; Brown, W.S.; Cooper, S.E.; Wreathall, J.; Bley, D.C.

1994-01-01

To support the development of a refined human reliability analysis (HRA) framework, to address identified HRA user needs and improve HRA modeling, unique aspects of human performance have been identified from an analysis of actual plant-specific events. Through the use of the refined framework, relationships between the following HRA, human factors and probabilistic risk assessment (PRA) elements were described: the PRA model, plant states, plant conditions, PRA basic events, unsafe human actions, error mechanisms, and performance shaping factors (PSFs). The event analyses performed in the context of the refined HRA framework, identified the need for new HRA methods that are capable of: evaluating a range of different error mechanisms (e.g., slips as well as mistakes); addressing errors of commission (EOCs) and dependencies between human actions; and incorporating the influence of plant conditions and multiple PSFs on human actions. This report discusses the results of the assessment of user needs, the refinement of the existing HRA framework, as well as, the current status on EOCs, and human dependencies

Implications of an HRA framework for quantifying human acts of commission and dependency: Development of a methodology for conducting an integrated HRA/PRA

International Nuclear Information System (INIS)

Barriere, M.T.; Luckas, W.J.; Brown, W.S.; Cooper, S.E.; Wreathall, J.; Bley, D.C.

1993-01-01

To support the development of a refined human reliability analysis (HRA) framework, to address identified HRA user needs and improve HRA modeling, unique aspects of human performance have been identified from an analysis of actual plant-specific events. Through the use of the refined framework, relationships between the following HRA, human factors and probabilistic risk assessment (PRA) elements were described: the PRA model, plant states, plant conditions, PRA basic events, unsafe human actions, error mechanisms, and performance shaping factors (PSFs). The event analyses performed in the context of the refined HRA framework, identified the need for new HRA methods that are capable of: evaluating a range of different error mechanisms (e.g., slips as well as mistakes); addressing errors of commission (EOCs) and dependencies between human actions; and incorporating the influence of plant conditions and multiple PSFs on human actions. This report discusses the results of the assessment of user needs, the refinement of the existing HRA framework, as well as, the current status on EOCs, and human dependencies

Lupus erythematosus and localized scleroderma coexistent at the same sites: a rare presentation of overlap syndrome of connective-tissue diseases.

Science.gov (United States)

Pascucci, Anabella; Lynch, Peter J; Fazel, Nasim

2016-05-01

Overlap syndromes are known to occur with connective-tissue diseases (CTDs). Rarely, the overlap occurs at the same tissue site. We report the case of a patient with clinical and histopathologic findings consistent with the presence of discoid lupus erythematosus (DLE) and localized scleroderma within the same lesions. Based on our case and other reported cases in the literature, the following features are common in patients with an overlap of lupus erythematosus (LE) and localized scleroderma: predilection for young women, photodistributed lesions, DLE, linear morphology clinically, and positivity along the dermoepidermal junction on direct immunofluorescence. Most patients showed good response to antimalarials, topical steroids, or systemic steroids.

Návrh tvorby rezervy na restrukturalizaci ve společnosti Tesco Stores ČR, a.s.

OpenAIRE

Vašulínová, Kateřina

2010-01-01

Bakalářská práce se zabývá analýzou rozdílů ve vykazování rezerv dle české účetní legislativy a dle Mezinárodních standardů finančního výkaznictví. Zaměřena je na tvorbu rezervy na restrukturalizaci ve společnosti Tesco Stores ČR, a.s. The bachelor’s thesis analyses the issues differences in the provisions recognition under the Czech Accounting Standards and under International Financial Reporting Standards. The thesis is oriented on restructuring provision recording in company Tesco Store...

Single-Staged Improved Tubularized Preputial/Penile Skin Flap Urethroplasty for Obliterated Anterior Urethral Stricture: Long-Term Results.

Science.gov (United States)

Xue, Jing-Dong; Xie, Hong; Fu, Qiang; Feng, Chao; Guo, Hui; Xu, Yue-Min

2016-01-01

To present an improved tubularized flap (ITF) technique and report the outcome of single-stage urethroplasty using preputial/penile skin flaps (PSFs) for the treatment of obliterative anterior urethral strictures (AUSs). From January 2000 to June 2012, 42 cases of obliterative AUS (3-14 cm, mean 6.38 cm) with urethral plate unsalvageable were treated using PSF-ITF urethroplasty including longitudinal skin flap, circular island flap, L-flap, Q-flap. Patients were divided into 3 groups: pendulous urethral stricture (Group A), bulbar urethral stricture (Group B) and panurethral strictures (Group C). Patients were followed up by uroflowmetry, urethrography and ureteroscope when necessary. The mean follow-up in these patients was 65 months (range 36 months-15 years). The primary success rates at 3-year follow-up were 75, 75 and 60% for Groups A, B and C, respectively. The overall success rates were 85, 83 and 70% with the remedial measure of a single visual internal urethrotomy at 3-year follow-up. A total 60% of the patients in the study completed more than 5 years of follow-up with no additional recurrence. Improved tubularized preputial/PSF urethroplasty with relatively high overall satisfaction is a novel technique for treatment of AUS when there is inadequate urethral plate or obliterative defects. © 2016 S. Karger AG, Basel.

A robust statistical estimation (RoSE) algorithm jointly recovers the 3D location and intensity of single molecules accurately and precisely

Science.gov (United States)

Mazidi, Hesam; Nehorai, Arye; Lew, Matthew D.

2018-02-01

In single-molecule (SM) super-resolution microscopy, the complexity of a biological structure, high molecular density, and a low signal-to-background ratio (SBR) may lead to imaging artifacts without a robust localization algorithm. Moreover, engineered point spread functions (PSFs) for 3D imaging pose difficulties due to their intricate features. We develop a Robust Statistical Estimation algorithm, called RoSE, that enables joint estimation of the 3D location and photon counts of SMs accurately and precisely using various PSFs under conditions of high molecular density and low SBR.

Measuring variability of procedure progression in proceduralized scenarios

International Nuclear Information System (INIS)

Kim, Yochan; Park, Jinkyun; Jung, Wondea

2012-01-01

Highlights: ► The VPP measure was developed to quantify how differently operators follow the procedures. ► Sources that cause variability of ways to follow a given procedure were identified. ► The VPP values for the scenarios are positively related to the scenario performance time. ► The VPP measure is meaningful for explaining characteristics of several PSFs. -- Abstract: Various performance shaping factors (PSFs) have been presented to explain the contributors to unsafe acts in a human failure event or predict a human error probability of new human performance. However, because most of these parameters of an HRA depend on the subjective knowledge and experience of HRA analyzers, the results of an HRA insufficiently provide unbiased standards to explain human performance variations or compare collected data with other data from different analyzers. To secure the validity of the HRA results, we propose a quantitative measure, which represents the variability of procedure progression (VPP) in proceduralized scenarios. A VPP measure shows how differently the operators follow the steps of the procedures. This paper introduces the sources of the VPP measure and relevance to PSFs. The assessment method of the VPP measure is also proposed, and the application examples are shown with a comparison of the performance time. Although more empirical studies should be conducted to reveal the relationship between the VPP measure and other PSFs, it is believed that the VPP measure provides evidence to quantitatively evaluate human performance variations and to cross-culturally compare the collected data.

Signal displacement in spiral-in acquisitions: simulations and implications for imaging in SFG regions.

Science.gov (United States)

Brewer, Kimberly D; Rioux, James A; Klassen, Martyn; Bowen, Chris V; Beyea, Steven D

2012-07-01

Susceptibility field gradients (SFGs) cause problems for functional magnetic resonance imaging (fMRI) in regions like the orbital frontal lobes, leading to signal loss and image artifacts (signal displacement and "pile-up"). Pulse sequences with spiral-in k-space trajectories are often used when acquiring fMRI in SFG regions such as inferior/medial temporal cortex because it is believed that they have improved signal recovery and decreased signal displacement properties. Previously postulated theories explain differing reasons why spiral-in appears to perform better than spiral-out; however it is clear that multiple mechanisms are occurring in parallel. This study explores differences in spiral-in and spiral-out images using human and phantom empirical data, as well as simulations consistent with the phantom model. Using image simulations, the displacement of signal was characterized using point spread functions (PSFs) and target maps, the latter of which are conceptually inverse PSFs describing which spatial locations contribute signal to a particular voxel. The magnitude of both PSFs and target maps was found to be identical for spiral-out and spiral-in acquisitions, with signal in target maps being displaced from distant regions in both cases. However, differences in the phase of the signal displacement patterns that consequently lead to changes in the intervoxel phase coherence were found to be a significant mechanism explaining differences between the spiral sequences. The results demonstrate that spiral-in trajectories do preserve more total signal in SFG regions than spiral-out; however, spiral-in does not in fact exhibit decreased signal displacement. Given that this signal can be displaced by significant distances, its recovery may not be preferable for all fMRI applications. Copyright © 2012 Elsevier Inc. All rights reserved.

First results on photon strength functions of 78Se from the two-step γ Cascades measurement

Science.gov (United States)

Valenta, Stanislav; Bečvář, František; Krtička, Milan; Tomandl, Ivo

2017-09-01

Two-step gamma cascades (TSCs) following the radiative capture of thermal neutrons in 77Se were measured at the research reactor at Řež near Prague. Results on photon strength functions (PSFs) of 78Se, obtained from comparison of experimental TSC spectra with outcomes of simulations under different assumptions about level density and PSFs using the DICEBOX algorithm, are presented. The main attention is paid to possible manifestation of the pygmy resonance observed recently in this nucleus in the nuclear resonance fluorescence measurement and low-energy PSF enhancement observed in Oslo-type experiments for all A ≲ 100 nuclei.

Research Article Special Issue

African Journals Online (AJOL)

2017-08-08

Aug 8, 2017 ... Badak Campus, 21300 Kuala Nerus, Terengganu, Malaysia l, Development and ... concentration contamination at dle stream more polluted .... types of industrial activities such as food and beverages, chemical manufacturing,.

Development of partial safety factors for the design of partially prestressed rectangular sections in biaxial flexure

International Nuclear Information System (INIS)

Chatterjee, Aritra; Bhattacharya, Baidurya; Agrawal, Gunjan; Mondal, Apurba

2011-01-01

Partial safety factors (PSFs) used in reliability-based design are intended to account for uncertainties in load, material and mathematical modeling while ensuring that the target reliability is satisfied for the relevant class of structural components in the given load combination and limit state. This paper describes the methodology in detail for developing a set of optimal reliability-based PSFs for the design of rectangular partially prestressed concrete sections subjected to biaxial flexure. The mechanical formulation of the flexural limit state is based on the principle behind prestressed concrete design recommended by IS 1343 and SP16 and failure is defined as tensile cracking of concrete extending beyond the depth of cover. The applied moments are combined according to Wood's criteria. The optimization of the PSFs is based on reliability indices obtained from first order reliability analysis of the structural components; Monte Carlo simulations are performed in each run to determine the capacity statistics and dependence between capacity and applied loads (effected through the axial loads influencing moment capacity corresponding to cracking). Numerical examples involving flexural design of partially prestressed concrete shell elements in nuclear power plant containments under accidental pressure load combination are provided. (author)

Bulk and Surface Aqueous Speciation of Calcite: Implications for Low-Salinity Waterflooding of Carbonate Reservoirs

KAUST Repository

Yutkin, Maxim P.; Mishra, Himanshu; Patzek, Tadeusz; Lee, John; Radke, Clayton J.

2017-01-01

and surface equilibria draws several important inferences about the proposed LSW oil-recovery mechanisms. Diffuse double-layer expansion (DLE) is impossible for brine ionic strength greater than 0.1 molar. Because of rapid rock/brine equilibration

Extracting and Converting Quantitative Data into Human Error Probabilities

Energy Technology Data Exchange (ETDEWEB)

Tuan Q. Tran; Ronald L. Boring; Jeffrey C. Joe; Candice D. Griffith

2007-08-01

This paper discusses a proposed method using a combination of advanced statistical approaches (e.g., meta-analysis, regression, structural equation modeling) that will not only convert different empirical results into a common metric for scaling individual PSFs effects, but will also examine the complex interrelationships among PSFs. Furthermore, the paper discusses how the derived statistical estimates (i.e., effect sizes) can be mapped onto a HRA method (e.g. SPAR-H) to generate HEPs that can then be use in probabilistic risk assessment (PRA). The paper concludes with a discussion of the benefits of using academic literature in assisting HRA analysts in generating sound HEPs and HRA developers in validating current HRA models and formulating new HRA models.

Real-Time Flood Control by Tree-Based Model Predictive Control Including Forecast Uncertainty: A Case Study Reservoir in Turkey

Directory of Open Access Journals (Sweden)

Gökçen Uysal

2018-03-01

Full Text Available Optimal control of reservoirs is a challenging task due to conflicting objectives, complex system structure, and uncertainties in the system. Real time control decisions suffer from streamflow forecast uncertainty. This study aims to use Probabilistic Streamflow Forecasts (PSFs having a lead-time up to 48 h as input for the recurrent reservoir operation problem. A related technique for decision making is multi-stage stochastic optimization using scenario trees, referred to as Tree-based Model Predictive Control (TB-MPC. Deterministic Streamflow Forecasts (DSFs are provided by applying random perturbations on perfect data. PSFs are synthetically generated from DSFs by a new approach which explicitly presents dynamic uncertainty evolution. We assessed different variables in the generation of stochasticity and compared the results using different scenarios. The developed real-time hourly flood control was applied to a test case which had limited reservoir storage and restricted downstream condition. According to hindcasting closed-loop experiment results, TB-MPC outperforms the deterministic counterpart in terms of decreased downstream flood risk according to different independent forecast scenarios. TB-MPC was also tested considering different number of tree branches, forecast horizons, and different inflow conditions. We conclude that using synthetic PSFs in TB-MPC can provide more robust solutions against forecast uncertainty by resolution of uncertainty in trees.

SLIM-MAUD - a computer based technique for human reliability assessment

International Nuclear Information System (INIS)

Embrey, D.E.

1985-01-01

The Success Likelihood Index Methodology (SLIM) is a widely applicable technique which can be used to assess human error probabilities in both proceduralized and cognitive tasks (i.e. those involving decision making, problem solving, etc.). It assumes that expert assessors are able to evaluate the relative importance (or weights) of different factors called Performance Shaping Factors (PSFs), in determining the likelihood of error for the situations being assessed. Typical PSFs are the extent to which good procedures are available, operators are adequately trained, the man-machine interface is well designed, etc. If numerical ratings are made of the PSFs for the specific tasks being evaluated, these can be combined with the weights to give a numerical index, called the Success Likelihood Index (SLI). The SLI represents, in numerical form, the overall assessment of the experts of the likelihood of task success. The SLI can be subsequently transformed to a corresponding human error probability (HEP) estimate. The latest form of the SLIM technique is implemented using a microcomputer based system called MAUD (Multi-Attribute Utility Decomposition), the resulting technique being called SLIM-MAUD. A detailed description of the SLIM-MAUD technique and case studies of applications are available. An illustrative example of the application of SLIM-MAUD in probabilistic risk assessment is given

Diagnostic significance of colloid body deposition in direct immunofluorescence

Directory of Open Access Journals (Sweden)

Chularojanamontri Leena

2010-01-01

Full Text Available Background: Colloid bodies (CB in direct immunofluorescence (DIF studies are usually found in interface dermatitis. Furthermore, CB can be found in various skin diseases and even in normal skin. Aim: To evaluate the diagnostic value of CB deposits in DIF studies. Methods: From 1996-2007, data from 502 patients where DIF studies showed immunoreactants at CB were enrolled. The definite diagnoses of these patients were based on clinical, histopathological and immunofluorescent findings. The results of DIF studies were analyzed. Results: Immunoreactants at CB were detected in 44.4%, 43.8%, 4.2%, 3.8%, and 2.2% of interface dermatitis, vasculitis, autoimmune vesiculobullous disease, panniculitis, and scleroderma/morphea, respectively. The most common immunoreactant deposit of all diseases was Immunoglobulin M (IgM. Brighter intensity and higher quantity of CB was detected frequently in the group with interface dermatitis. Conclusions: Immunoreactant deposits at CB alone can be found in various diseases but a strong intensity and high quantity favor the diagnosis of interface dermatitis. CB plus dermoepidermal junction (DEJ deposits are more common in interface dermatitis than any other disease. Between lichen planus (LP and discoid lupus erythematosus (DLE, CB alone is more common in LP; whereas, CB plus DEJ and superficial blood vessel (SBV is more common in DLE. The most common pattern in both diseases is CB plus DEJ. The quantity and intensity of CB in LP is higher than in DLE.

Discoid Lupus Erythematosus

Science.gov (United States)

... Name: Category: Share: Yes No, Keep Private Discoid Lupus Erythematosus Share | Discoid lupus erythematosus (DLE) is a chronic skin condition of ... occur. A small percentage of patients with discoid lupus can develop disease of the internal organs, which ...

Wavelength-Dependent PSFs and their Impact on Weak Lensing Measurements

Science.gov (United States)

Carlsten, S. G.; Strauss, Michael A.; Lupton, Robert H.; Meyers, Joshua E.; Miyazaki, Satoshi

2018-06-01

We measure and model the wavelength dependence of the point spread function (PSF) in the Hyper Suprime-Cam Subaru Strategic Program survey. We find that PSF chromaticity is present in that redder stars appear smaller than bluer stars in the g, r, and i-bands at the 1-2 per cent level and in the z and y-bands at the 0.1-0.2 per cent level. From the color dependence of the PSF, we fit a model between the monochromatic PSF size based on weighted second moments, R, and wavelength of the form R(λ)∝λ-b. We find values of b between 0.2 and 0.5, depending on the epoch and filter. This is consistent with the expectations of a turbulent atmosphere with an outer scale length of ˜10 - 100 m, indicating that the atmosphere is dominating the chromaticity. In the best seeing data, we find that the optical system and detector also contribute some wavelength dependence. Meyers & Burchat (2015b) showed that b must be measured to an accuracy of ˜0.02 not to dominate the systematic error budget of the Large Synoptic Survey Telescope (LSST) weak lensing (WL) survey. Using simple image simulations, we find that b can be inferred with this accuracy in the r and i-bands for all positions in the LSST focal plane, assuming a stellar density of 1 star arcmin-2 and that the optical component of the PSF can be accurately modeled. Therefore, it is possible to correct for most, if not all, of the bias that the wavelength-dependent PSF will introduce into an LSST-like WL survey.

Discoid Lupus Erythematosus

Science.gov (United States)

... Name: Category: Share: Yes No, Keep Private Discoid Lupus Erythematosus Share | Discoid lupus erythematosus (DLE) is a chronic skin condition of sores ... diagnosis because other conditions can look like discoid lupus erythematosus. If the skin biopsy shows discoid lupus erythematosus, ...

Vykazování hráčských smluv ve fotbale dle IFRS

OpenAIRE

Kučera, Martin

2016-01-01

The goals of this diploma thesis are to characterize the current stadium of disclosure information about player contracts in football based on the IFRS standards and describe possible policy improvements for accounting standards. Theoretical part focus on an analysis of chosen IFRS standards, especially IAS 38 and UEFA regulations. Practical part of the thesis present a research of player contracts in the hands of particular football clubs with an emphasis on the method of acquisition.

Data reduction pipeline for the CHARIS integral-field spectrograph I: detector readout calibration and data cube extraction

Science.gov (United States)

Brandt, Timothy D.; Rizzo, Maxime; Groff, Tyler; Chilcote, Jeffrey; Greco, Johnny P.; Kasdin, N. Jeremy; Limbach, Mary Anne; Galvin, Michael; Loomis, Craig; Knapp, Gillian; McElwain, Michael W.; Jovanovic, Nemanja; Currie, Thayne; Mede, Kyle; Tamura, Motohide; Takato, Naruhisa; Hayashi, Masahiko

2017-10-01

We present the data reduction pipeline for CHARIS, a high-contrast integral-field spectrograph for the Subaru Telescope. The pipeline constructs a ramp from the raw reads using the measured nonlinear pixel response and reconstructs the data cube using one of three extraction algorithms: aperture photometry, optimal extraction, or χ2 fitting. We measure and apply both a detector flatfield and a lenslet flatfield and reconstruct the wavelength- and position-dependent lenslet point-spread function (PSF) from images taken with a tunable laser. We use these measured PSFs to implement a χ2-based extraction of the data cube, with typical residuals of ˜5% due to imperfect models of the undersampled lenslet PSFs. The full two-dimensional residual of the χ2 extraction allows us to model and remove correlated read noise, dramatically improving CHARIS's performance. The χ2 extraction produces a data cube that has been deconvolved with the line-spread function and never performs any interpolations of either the data or the individual lenslet spectra. The extracted data cube also includes uncertainties for each spatial and spectral measurement. CHARIS's software is parallelized, written in Python and Cython, and freely available on github with a separate documentation page. Astrometric and spectrophotometric calibrations of the data cubes and PSF subtraction will be treated in a forthcoming paper.

Heavy metal pollution decreases microbial abundance, diversity and activity within particle-size fractions of a paddy soil.

Science.gov (United States)

Chen, Junhui; He, Feng; Zhang, Xuhui; Sun, Xuan; Zheng, Jufeng; Zheng, Jinwei

2014-01-01

Chemical and microbial characterisations of particle-size fractions (PSFs) from a rice paddy soil subjected to long-term heavy metal pollution (P) and nonpolluted (NP) soil were performed to investigate whether the distribution of heavy metals (Cd, Cu, Pb and Zn) regulates microbial community activity, abundance and diversity at the microenvironment scale. The soils were physically fractionated into coarse sand, fine sand, silt and clay fractions. Long-term heavy metal pollution notably decreased soil basal respiration (a measurement of the total activity of the soil microbial community) and microbial biomass carbon (MBC) across the fractions by 3-45% and 21-53%, respectively. The coarse sand fraction was more affected by pollution than the clay fraction and displayed a significantly lower MBC content and respiration and dehydrogenase activity compared with the nonpolluted soils. The abundances and diversities of bacteria were less affected within the PSFs under pollution. However, significant decreases in the abundances and diversities of fungi were noted, which may have strongly contributed to the decrease in MBC. Sequencing of denaturing gradient gel electrophoresis bands revealed that the groups Acidobacteria, Ascomycota and Chytridiomycota were clearly inhibited under pollution. Our findings suggest that long-term heavy metal pollution decreased the microbial biomass, activity and diversity in PSFs, particularly in the large-size fractions. © 2013 Federation of European Microbiological Societies. Published by John Wiley & Sons Ltd. All rights reserved.

AFJU OFC 18(2).indd

African Journals Online (AJOL)

shanker

Although the effect of PNI on long-term outcome in patients with PC has been ... RP or external beam radiotherapy (RT) for localized and low risk. PC [2,3]. ... dle on the side of biopsy detected PNI may decrease the positive surgical margin rate ...

A randomized controlled trial of R-salbutamol for topical treatment of discoid lupus erythematosus

DEFF Research Database (Denmark)

Jemec, G B E; Ullman, S; Goodfield, M

2009-01-01

BACKGROUND: In a recent open pilot trial, R-salbutamol sulphate, a well-known molecule with anti-inflammatory effects, was tested successfully on patients with therapy-resistant discoid lupus erythematosus (DLE). OBJECTIVES: To compare the efficacy and safety of R-salbutamol cream 0.5% vs. placebo...

Different pathways are involved in the enhancement of photosynthetic rate by sodium bisulfite and benzyladenine, a case study with strawberry (Fragaria x Ananassa Duch) plants

NARCIS (Netherlands)

Guo, Y.P.; Peng, Y.; Lin, M.L.; Guo, D.P.; Hu, M.J.; Shen, Y.K.; Li, D.Y.; Zheng, S.J.

2006-01-01

In order to understand the pathway involved in the chemical enhancement of photosynthetic rate, sodium bisulfite (NaHSO3) and benzyladenine (BA), a growth regulator, were applied to strawberry plants. The influence of these compounds on gas exchange and millisecond delayed light emission (ms-DLE)

The Case of NTC's Dictionary of Proverbs and Clichés

African Journals Online (AJOL)

What makes the groups or units of fixed expressions distinct from one .... as to cut off your nose to spite your face and to throw the baby out with the bathwater would be .... meanings. Procedure ...... The biggest frog/toad in the pud- dle (p. 194).

Effects of intracutaneous injections of sterile water in patients with acute low back pain: a randomized, controlled, clinical trial

Directory of Open Access Journals (Sweden)

J.Z. Cui

2016-03-01

Full Text Available Intracutaneous sterile water injection (ISWI is used for relief of low back pain during labor, acute attacks of urolithiasis, chronic neck and shoulder pain following whiplash injuries, and chronic myofascial pain syndrome. We conducted a randomized, double-blinded, placebo-controlled trial to evaluate the effect of ISWI for relief of acute low back pain (aLBP. A total of 68 patients (41 females and 27 males between 18 and 55 years old experiencing aLBP with moderate to severe pain (scores ≥5 on an 11-point visual analogue scale [VAS] were recruited and randomly assigned to receive either ISWIs (n=34 or intracutaneous isotonic saline injections (placebo treatment; n=34. The primary outcome was improvement in pain intensity using the VAS at 10, 45, and 90 min and 1 day after treatment. The secondary outcome was functional improvement, which was assessed using the Patient-Specific Functional Scale (PSFS 1 day after treatment. The mean VAS score was significantly lower in the ISWI group than in the control group at 10, 45, and 90 min, and 1 day after injection (P<0.05, t-test. The mean increment in PSFS score of the ISWI group was 2.9±2.2 1 day after treatment, while that in the control group was 0.9±2.2. Our study showed that ISWI was effective for relieving pain and improving function in aLBP patients at short-term follow-up. ISWI might be an alternative treatment for aLBP patients, especially in areas where medications are not available, as well as in specific patients (e.g., those who are pregnant or have asthma, who are unable to receive medications or other forms of analgesia because of side effects.

A Demonstration of Optimal Apodization Determination for Proper Lateral Modulation

Science.gov (United States)

Sumi, Chikayoshi; Komiya, Yuichi; Uga, Shinya

2009-07-01

We have realized effective ultrasound (US) beamformings by the steering of plural beams and apodizations for B-mode imaging with a high lateral resolution and accurate measurement of tissue or blood displacement vector and/or strain tensor using the multidimensional cross-spectrum phase gradient method (MCSPGM), or multidimensional autocorrelation or Doppler methods (MAM and MDM) using multidimensional analytic signals. For instance, the coherent superposition of the steered beams performed in the lateral cosine modulation method (LCM) has a higher potential for realizing a more accurate measurement of a displacement vector than the synthesis of the displacement vector using the accurately measured axial displacements obtained by the multidimensional synthetic aperture method (MDSAM), multidirectional transmission method (MTM) or the use of plural US transducers. Originally, the apodization function to be used for realizing a designed point spread function (PSF) was obtained by the Fraunhofer approximation (FA). However, to obtain the best approximated, designed PSF in the least-squares sense, we proposed a linear optimization (LO) method. Furthermore, on the basis of the knowledge about the losts of US energy during the propagation, we have recently developed a nonlinear optimization (NLO) method, in which the feet of the main lobes in apodization function are properly truncated. Thus, NLO also allows the decrease in the number of channels or the confinement of the effective aperture. In this study, to gain insight into the ideal shape of the PSF, the accuracies of the two-dimensional (2D) displacement vector measurements were compared for typical PSFs with distinct lateral envelope shapes, particularly, in terms of full width at half maximum (FWHM) and the length of the feet, i.e., the Gaussian function, Hanning window and parabolic function. It was confirmed that a PSF having a wide FWHM and short feet was ideal. Such a PSF yielded an echo with a high signal

Biological effect of methanol extracts of Candlewood Zanthoxylum ...

African Journals Online (AJOL)

Methanol extract of dried leaf (DLE), dried bark (DBE), dried root (DRE), fresh bark (FBE) and fresh root (FRE) of Zanthoxylum xanthoxyloides (Lam.) was assessed in the laboratory against infestation of Sitophilus zeamais, Callosobruchus maculatus and Tribolium castaneum in stored maize and cowpea. One hundred ...

NVGClient - Programový systém pro vizualizaci taktických dat ve 3D pro OTS VŘ PozS

OpenAIRE

Přenosil Václav; Františ Petr; Hodický Jan; Havelka Ladislav

2012-01-01

Program NVGClient je určený k přenosu taktických průsvitek z webové služby dle standardu NATO NVG do použitého vizualizačního programu. Při přenosu taktických průsvitek dochází k rozdělení jednotlivých grafických elementů (taktických značek) do určených kategorií a rovněž dochází k převodu symbolů (taktických značek) v přenášených průsvitkách dle kódu APP6B do jeho grafické podoby. Zároveň jsou taktické značky jednotek doplněny informacemi z příslušné databáze o jejich stavu (množství pohonný...

Evaluative Measurement Properties of the Patient-Specific Functional Scale for Primary Shoulder Complaints in Physical Therapy Practice

NARCIS (Netherlands)

Koehorst, Marije L. S.; van Trijffel, Emiel; Lindeboom, Robert

2014-01-01

STUDY DESIGN: Clinical measurement, longitudinal. OBJECTIVES: To assess the test-retest reliability, construct validity, and responsiveness of the Patient-Specific Functional Scale (PSFS) in patients with a primary shoulder complaint. BACKGROUND: Health measurement outcomes have become increasingly

Reframing Language Allocation Policy in Dual Language Bilingual Education

Science.gov (United States)

Sánchez, María Teresa; García, Ofelia; Solorza, Cristian

2018-01-01

This article addresses language allocation policies in what is increasingly called "Dual Language Education" (DLE) in the U.S., offering a challenge to the strict language separation policies in those programs and a proposal for flexibility that transforms them into "Dual Language Bilingual Education" (DLBE). The article offers…

Bringing Down the Barriers to Information Transfer (L’Abaissement des Barrieres s’Opposant au Transfert de l’Information)

Science.gov (United States)

1992-02-01

Others included CD-ROM, magnetic tape, Microfiche/microfilm, autocad, CPU, mylar and verbal . Table 2: Amount of Time Spent Acquiring and Using...Transportes y Comunicaciones - Biblioteca. Ministerio de Ohmas Publicas. Plaza dle San Juan de la Cruz s/n, 280(03 Madrid. Spain Mr MiJ. SCHRYER* Director

Comparative analysis of the quality of life of patients with discoid lupus erythematosus and systemic lupus erythematosus with skin injuries Análise comparativa da qualidade de vida de pacientes portadores de lúpus eritematoso discóide e lúpus eritematoso sistêmico com lesões cutâneas

Directory of Open Access Journals (Sweden)

Priscila Reis Martins

2012-04-01

Full Text Available Lupus erythematosus is an autoimmune disease of unknown etiology with cutaneous and vascular lesions. Both discoid lupus erythematosus (DLE and systemic lupus (SLE affect the skin. Visible skin lesions in young women can cause loss of self esteem. In the present study we aimed to evaluate and compare the quality of life in SLE and LED through an observational study of 64 patients. These patients were divided into 2 groups: Group 1: SLE (n = 38; group 2: DLE (n = 26 and then completed the quality of life questionnaire - Dermatology Life Quality Index or DLQI. It was found that patients with DLE have a worse quality of life than patients with SLE. It is believed that this fact is generated by the difference in the spectrum of injuries.Lúpus eritematoso é uma doença auto-imune de etiologia desconhecida, com lesões cutâneovasculares. Tanto o Lúpus Eritematoso Discóide (LED como o Sistêmico (LES acometem a pele. Lesões cutâneas visíveis em mulheres jovens podem causar perda de auto estima. No presente estudo procurou-se avaliar e comparar a qualidade de vida em 64 pacientes com LED e LES através de um estudo observacional. Esses pacientes foram divididos em 2 grupos: Grupo 1: LES (n=38; grupo 2: LED (n=26. A seguir aplicou-se o questionário de qualidade de vida - Dermatology Life Quality Índex ou DLQI. Verificou-se que pacientes com LED têm pior qualidade de vida que pacientes com LES Acredita-se que este fato seja gerado pela diferença no espectro de suas lesões.

Model-based PSF and MTF estimation and validation from skeletal clinical CT images.

Science.gov (United States)

Pakdel, Amirreza; Mainprize, James G; Robert, Normand; Fialkov, Jeffery; Whyne, Cari M

2014-01-01

A method was developed to correct for systematic errors in estimating the thickness of thin bones due to image blurring in CT images using bone interfaces to estimate the point-spread-function (PSF). This study validates the accuracy of the PSFs estimated using said method from various clinical CT images featuring cortical bones. Gaussian PSFs, characterized by a different extent in the z (scan) direction than in the x and y directions were obtained using our method from 11 clinical CT scans of a cadaveric craniofacial skeleton. These PSFs were estimated for multiple combinations of scanning parameters and reconstruction methods. The actual PSF for each scan setting was measured using the slanted-slit technique within the image slice plane and the longitudinal axis. The Gaussian PSF and the corresponding modulation transfer function (MTF) are compared against the actual PSF and MTF for validation. The differences (errors) between the actual and estimated full-width half-max (FWHM) of the PSFs were 0.09 ± 0.05 and 0.14 ± 0.11 mm for the xy and z axes, respectively. The overall errors in the predicted frequencies measured at 75%, 50%, 25%, 10%, and 5% MTF levels were 0.06 ± 0.07 and 0.06 ± 0.04 cycles/mm for the xy and z axes, respectively. The accuracy of the estimates was dependent on whether they were reconstructed with a standard kernel (Toshiba's FC68, mean error of 0.06 ± 0.05 mm, MTF mean error 0.02 ± 0.02 cycles/mm) or a high resolution bone kernel (Toshiba's FC81, PSF FWHM error 0.12 ± 0.03 mm, MTF mean error 0.09 ± 0.08 cycles/mm). The method is accurate in 3D for an image reconstructed using a standard reconstruction kernel, which conforms to the Gaussian PSF assumption but less accurate when using a high resolution bone kernel. The method is a practical and self-contained means of estimating the PSF in clinical CT images featuring cortical bones, without the need phantoms or any prior knowledge about the scanner-specific parameters.

Model-based PSF and MTF estimation and validation from skeletal clinical CT images

International Nuclear Information System (INIS)

Pakdel, Amirreza; Mainprize, James G.; Robert, Normand; Fialkov, Jeffery; Whyne, Cari M.

2014-01-01

Purpose: A method was developed to correct for systematic errors in estimating the thickness of thin bones due to image blurring in CT images using bone interfaces to estimate the point-spread-function (PSF). This study validates the accuracy of the PSFs estimated using said method from various clinical CT images featuring cortical bones. Methods: Gaussian PSFs, characterized by a different extent in the z (scan) direction than in the x and y directions were obtained using our method from 11 clinical CT scans of a cadaveric craniofacial skeleton. These PSFs were estimated for multiple combinations of scanning parameters and reconstruction methods. The actual PSF for each scan setting was measured using the slanted-slit technique within the image slice plane and the longitudinal axis. The Gaussian PSF and the corresponding modulation transfer function (MTF) are compared against the actual PSF and MTF for validation. Results: The differences (errors) between the actual and estimated full-width half-max (FWHM) of the PSFs were 0.09 ± 0.05 and 0.14 ± 0.11 mm for the xy and z axes, respectively. The overall errors in the predicted frequencies measured at 75%, 50%, 25%, 10%, and 5% MTF levels were 0.06 ± 0.07 and 0.06 ± 0.04 cycles/mm for the xy and z axes, respectively. The accuracy of the estimates was dependent on whether they were reconstructed with a standard kernel (Toshiba's FC68, mean error of 0.06 ± 0.05 mm, MTF mean error 0.02 ± 0.02 cycles/mm) or a high resolution bone kernel (Toshiba's FC81, PSF FWHM error 0.12 ± 0.03 mm, MTF mean error 0.09 ± 0.08 cycles/mm). Conclusions: The method is accurate in 3D for an image reconstructed using a standard reconstruction kernel, which conforms to the Gaussian PSF assumption but less accurate when using a high resolution bone kernel. The method is a practical and self-contained means of estimating the PSF in clinical CT images featuring cortical bones, without the need phantoms or any prior knowledge about the

Model-based PSF and MTF estimation and validation from skeletal clinical CT images

Energy Technology Data Exchange (ETDEWEB)

Pakdel, Amirreza [Sunnybrook Research Institute, Toronto, Ontario M4N 3M5, Canada and Institute of Biomaterials and Biomedical Engineering, University of Toronto, Toronto, Ontario M5S 3M2 (Canada); Mainprize, James G.; Robert, Normand [Sunnybrook Research Institute, Toronto, Ontario M4N 3M5 (Canada); Fialkov, Jeffery [Division of Plastic Surgery, Sunnybrook Health Sciences Center, Toronto, Ontario M4N 3M5, Canada and Department of Surgery, University of Toronto, Toronto, Ontario M5S 3M2 (Canada); Whyne, Cari M., E-mail: cari.whyne@sunnybrook.ca [Sunnybrook Research Institute, Toronto, Ontario M4N 3M5, Canada and Department of Surgery, Institute of Biomaterials and Biomedical Engineering, University of Toronto, Toronto, Ontario M5S 3M2 (Canada)

2014-01-15

Purpose: A method was developed to correct for systematic errors in estimating the thickness of thin bones due to image blurring in CT images using bone interfaces to estimate the point-spread-function (PSF). This study validates the accuracy of the PSFs estimated using said method from various clinical CT images featuring cortical bones. Methods: Gaussian PSFs, characterized by a different extent in the z (scan) direction than in the x and y directions were obtained using our method from 11 clinical CT scans of a cadaveric craniofacial skeleton. These PSFs were estimated for multiple combinations of scanning parameters and reconstruction methods. The actual PSF for each scan setting was measured using the slanted-slit technique within the image slice plane and the longitudinal axis. The Gaussian PSF and the corresponding modulation transfer function (MTF) are compared against the actual PSF and MTF for validation. Results: The differences (errors) between the actual and estimated full-width half-max (FWHM) of the PSFs were 0.09 ± 0.05 and 0.14 ± 0.11 mm for the xy and z axes, respectively. The overall errors in the predicted frequencies measured at 75%, 50%, 25%, 10%, and 5% MTF levels were 0.06 ± 0.07 and 0.06 ± 0.04 cycles/mm for the xy and z axes, respectively. The accuracy of the estimates was dependent on whether they were reconstructed with a standard kernel (Toshiba's FC68, mean error of 0.06 ± 0.05 mm, MTF mean error 0.02 ± 0.02 cycles/mm) or a high resolution bone kernel (Toshiba's FC81, PSF FWHM error 0.12 ± 0.03 mm, MTF mean error 0.09 ± 0.08 cycles/mm). Conclusions: The method is accurate in 3D for an image reconstructed using a standard reconstruction kernel, which conforms to the Gaussian PSF assumption but less accurate when using a high resolution bone kernel. The method is a practical and self-contained means of estimating the PSF in clinical CT images featuring cortical bones, without the need phantoms or any prior knowledge

Density-dependency and plant-soil feedback: former plant abundance influences competitive interactions between two grassland plant species through plant-soil feedbacks

NARCIS (Netherlands)

Xue, W.; Bezemer, T.M.; Berendse, Frank

2018-01-01

Backgrounds and aims Negative plant-soil feedbacks (PSFs) are thought to promote species coexistence, but most evidence is derived from theoretical models and data from plant monoculture experiments. Methods We grew Anthoxanthum odoratum and Centaurea jacea in field plots in monocultures and in

Tackling the work-life balance challenge in Professional Service Firms: the impact of projects, organizing and service characteristics

NARCIS (Netherlands)

Noury, L.C.; Gand, Sébastien; Sardas, Jean-Claude

2017-01-01

Professional Service Firms (PSFs) are currently under considerable pressure for economic reasons (low growth, pressure on cost), but also from the emergence of individual demands for work-life balance (WLB) from professionals, which challenge traditional ways of organizing both projects and careers.

Profits or Professionalism? On Designing Professional Service Firms

NARCIS (Netherlands)

M.W. Lander (Michel)

2012-01-01

textabstractResearch on professional service firms (PSFs) did not come off the ground until recently. This lack of attention is surprising, given their integral role in contemporary knowledge-based economies. In this dissertation, I focus on two professional industries: law and accounting.

Konrad Mäe medal Laurentsiusele ja A. D.-le

Index Scriptorium Estoniae

1999-01-01

Konrad Mäe medal ja preemia 1999. a. loomingu eest anti 19. XI Rüütelkonna hoones üle maalikunstnik Lauri Sillakule (Laurentsius) ja Anna Daniela Saalistele (A. D.) Tallinna Linnagaleriis toimunud näitusel eksponeeritud suureformaadiliste maalikompositsioonide 'The End', 'Aadam' ja 'Eeva' eest

Development of Image Analysis Software of MAXI

Science.gov (United States)

Eguchi, S.; Ueda, Y.; Hiroi, K.; Isobe, N.; Sugizaki, M.; Suzuki, M.; Tomida, H.; Maxi Team

2010-12-01

Monitor of All-sky X-ray Image (MAXI) is an X-ray all-sky monitor, attached to the Japanese experiment module Kibo on the International Space Station. The main scientific goals of the MAXI mission include the discovery of X-ray novae followed by prompt alerts to the community (Negoro et al., in this conference), and production of X-ray all-sky maps and new source catalogs with unprecedented sensitivities. To extract the best capabilities of the MAXI mission, we are working on the development of detailed image analysis tools. We utilize maximum likelihood fitting to a projected sky image, where we take account of the complicated detector responses, such as the background and point spread functions (PSFs). The modeling of PSFs, which strongly depend on the orbit and attitude of MAXI, is a key element in the image analysis. In this paper, we present the status of our software development.

Microbial community structures in high rate algae ponds for bioconversion of agricultural wastes from livestock industry for feed production.

Science.gov (United States)

Mark Ibekwe, A; Murinda, Shelton E; Murry, Marcia A; Schwartz, Gregory; Lundquist, Trygve

2017-02-15

Dynamics of seasonal microbial community compositions in algae cultivation ponds are complex. However, there is very limited knowledge on bacterial communities that may play significant roles with algae in the bioconversion of manure nutrients to animal feed. In this study, water samples were collected during winter, spring, summer, and fall from the dairy lagoon effluent (DLE), high rate algae ponds (HRAP) that were fed with diluted DLE, and municipal waste water treatment plant (WWTP) effluent which was included as a comparison system for the analysis of total bacteria, Cyanobacteria, and microalgae communities using MiSeq Illumina sequencing targeting the 16S V4 rDNA region. The main objective was to examine dynamics in microbial community composition in the HRAP used for the production of algal biomass. DNA was extracted from the different sample types using three commercially available DNA extraction kits; MoBio Power water extraction kit, Zymo fungi/bacterial extraction kit, and MP Biomedicals FastDNA SPIN Kit. Permutational analysis of variance (PERMANOVA) using distance matrices on each variable showed significant differences (P=0.001) in beta-diversity based on sample source. Environmental variables such as hydraulic retention time (HRT; P<0.031), total N (P<0.002), total inorganic N (P<0.002), total P (P<0.002), alkalinity (P<0.002), pH (P<0.022), total suspended solid (TSS; P<0.003), and volatile suspended solids (VSS; P<0.002) significantly affected microbial communities in DLE, HRAP, and WWTP. Of the operational taxonomic units (OTUs) identified to phyla level, the dominant classes of bacteria identified were: Cyanobacteria, Alpha-, Beta-, Gamma-, Epsilon-, and Delta-proteobacteria, Bacteroidetes, Firmicutes, and Planctomycetes. Our data suggest that microbial communities were significantly affected in HRAP by different environmental variables, and care must be taken in extraction procedures when evaluating specific groups of microbial communities for

Case Studies of Postponement in the Supply Chain

Science.gov (United States)

2006-06-14

immediate demand. Tew recognizes that the most flexible manufacturer can han- dle up to six platforms at a given time, as is the case at the Nissan ...model. GM hopes to build all of its vehicles out of only seven different platforms. Toyota and Ford are also following suit. But this is just the

Keep wetlands wet: the myth of sustainable development of tropical peatlands - implications for policies and management.

Science.gov (United States)

Evers, Stephanie; Yule, Catherine M; Padfield, Rory; O'Reilly, Patrick; Varkkey, Helena

2017-02-01

Pristine tropical peat swamp forests (PSFs) represent a unique wetland ecosystem of distinctive hydrology which support unique biodiversity and globally significant stores of soil carbon. Yet in Indonesia and Malaysia, home to 56% of the world's tropical peatland, they are subject to considerable developmental pressures, including widespread drainage to support agricultural needs. In this article, we review the ecology behind the functioning and ecosystem services provided by PSFs, with a particular focus on hydrological processes as well as the role of the forest itself in maintaining those services. Drawing on this, we review the suitability of current policy frameworks and consider the efficacy of their implementation. We suggest that policies in Malaysia and Indonesia are often based around the narrative of oil palm and other major monocrops as drivers of prosperity and development. However, we also argue that this narrative is also being supported by a priori claims concerning the possibility of sustainability of peat swamp exploitation via drainage-based agriculture through the adherence to best management practices. We discuss how this limits their efficacy, uptake and the political will towards enforcement. Further, we consider how both narratives (prosperity and sustainability) clearly exclude important considerations concerning the ecosystem value of tropical PSFs which are dependent on their unimpacted hydrology. Current research clearly shows that the actual debate should be focused not on how to develop drainage-based plantations sustainably, but on whether the sustainable conversion to drainage-based systems is possible at all. © 2016 John Wiley & Sons Ltd.

Polarization properties of La0.6Sr0.4Co0.2Fe0.8O3-based double layer-type oxygen electrodes for reversible SOFCs

International Nuclear Information System (INIS)

Tao, Y.; Nishino, H.; Ashidate, S.; Kokubo, H.; Watanabe, M.; Uchida, H.

2009-01-01

We have developed double layer-type (catalyst layer/current collecting layer) oxygen electrodes (DLE) for reversible SOFCs. As the catalyst layer (cathode for SOFC and anode for steam electrolysis) interfaced with a samaria-doped ceria [(CeO 2 ) 0.8 (SmO 1.5 ) 0.2 , SDC] interlayer/YSZ solid electrolyte, mixed conducting La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 (LSCF) and SDC particles were employed. The current collecting porous LSCF layer was formed on the catalyst layer. By controlling the SDC content, as well as the thickness and porosity of the catalyst layer, the gas diffusion rate and the conduction networks for electrons and oxide ions were optimized, resulting in a marked reduction of the overpotential. The LSCF + SDC/LSCF DLE exhibited higher performance than single-layer electrodes of LSCF + SDC or LSCF; the IR-free anode potential vs. an air reference electrode was 0.12 V (corresponding to an overpotential of 0.08 V) at 0.5 A cm -2 and 900 deg. C under an atmosphere of O 2 (1 atm)

Comparative PL study of individual ZnO nanorods, grown by APMOCVD and CBD techniques

Energy Technology Data Exchange (ETDEWEB)

Khranovskyy, Volodymyr, E-mail: volkh@ifm.liu.se [Department of Physics, Chemistry and Biology (IFM), Linkoeping University, 58183 Linkoeping (Sweden); Yakimova, Rositza; Karlsson, Fredrik; Syed, Abdul S.; Holtz, Per-Olof [Department of Physics, Chemistry and Biology (IFM), Linkoeping University, 58183 Linkoeping (Sweden); Nigussa Urgessa, Zelalem [Department of Physics, P.O Box 77000, Nelson Mandela Metropolitan University, Port Elizabeth 6031 (South Africa); Samuel Oluwafemi, Oluwatobi [Department of Chemistry and Chemical Technology, Walter Sisulu University, Mthatha Campus, Private Bag XI 5117 (South Africa); Reinhardt Botha, Johannes [Department of Physics, P.O Box 77000, Nelson Mandela Metropolitan University, Port Elizabeth 6031 (South Africa)

2012-05-15

The photoluminescence properties of individual ZnO nanorods, grown by atmospheric pressure metalorganic chemical vapor deposition (APMOCV) and chemical bath deposition (CBD) are investigated by means of temperature dependent micro-PL. It was found that the low temperature PL spectra are driven by neutral donor bound exciton emission D{sup 0}X, peaked at 3.359 and 3.363 eV for APMOCVD and CBD ZnO nanorods, respectively. The temperature increase causes a red energy shift of the peaks and enhancement of the free excitonic emission (FX). The FX was found to dominate after 150 K for both samples. It was observed that while APMOCVD ZnO nanorods possess a constant low signal of visible deep level emission with temperature, the ZnO nanorods grown by CBD revealed the thermal activation of deep level emission (DLE) after 130 K. The resulting room temperature DLE was a wide band located at 420-550 nm. The PL properties of individual ZnO nanorods can be of importance for their forthcoming application in future optoelectronics and photonics.

Comparative PL study of individual ZnO nanorods, grown by APMOCVD and CBD techniques

International Nuclear Information System (INIS)

Khranovskyy, Volodymyr; Yakimova, Rositza; Karlsson, Fredrik; Syed, Abdul S.; Holtz, Per-Olof; Nigussa Urgessa, Zelalem; Samuel Oluwafemi, Oluwatobi; Reinhardt Botha, Johannes

2012-01-01

The photoluminescence properties of individual ZnO nanorods, grown by atmospheric pressure metalorganic chemical vapor deposition (APMOCV) and chemical bath deposition (CBD) are investigated by means of temperature dependent micro-PL. It was found that the low temperature PL spectra are driven by neutral donor bound exciton emission D 0 X, peaked at 3.359 and 3.363 eV for APMOCVD and CBD ZnO nanorods, respectively. The temperature increase causes a red energy shift of the peaks and enhancement of the free excitonic emission (FX). The FX was found to dominate after 150 K for both samples. It was observed that while APMOCVD ZnO nanorods possess a constant low signal of visible deep level emission with temperature, the ZnO nanorods grown by CBD revealed the thermal activation of deep level emission (DLE) after 130 K. The resulting room temperature DLE was a wide band located at 420–550 nm. The PL properties of individual ZnO nanorods can be of importance for their forthcoming application in future optoelectronics and photonics.

Effects of Post- Heat Treatment of Nanocrystalline ZnO Thin Films deposited on Zn-Deposited FTO Substrates

Energy Technology Data Exchange (ETDEWEB)

Kim, Ikhyun; Kim, Younggyu; Nam, Giwoong; Leem, Jae-Young [Inje University, Gimhae (Korea, Republic of)

2015-10-15

The effects of heat-treatment temperature on the structural and optical properties of ZnO thin films were investigated with field-effect scanning electron microscopy (SEM), X-ray diffraction analysis, and photoluminescence (PL) measurements. The ZnO thin films were grown on Zn-deposited fluorine-doped tin oxide substrates by sol-gel spin coating. The SEM images of the samples showed that their surfaces had a mountain-chain-like structure. The film annealed at 400 ℃ had the highest degree of alignment along the c-axis, and its residual stress was close to zero. The PL spectra of the ZnO thin films consisted of sharp near-band-edge emissions (NBE) and broad deep-level emissions (DLE) in the visible range. The DLE peaks exhibited a green-to-red shift with an increase in the temperature. The highest INBE/IDLE ratio was observed in the film annealed at 400 ℃. Thus, the optimal temperature for growing high-quality ZnO thin films on Zn-deposited FTO substrates is 400 ℃.

Reliable and Damage-Free Estimation of Resistivity of ZnO Thin Films for Photovoltaic Applications Using Photoluminescence Technique

Directory of Open Access Journals (Sweden)

N. Poornima

2013-01-01

Full Text Available This work projects photoluminescence (PL as an alternative technique to estimate the order of resistivity of zinc oxide (ZnO thin films. ZnO thin films, deposited using chemical spray pyrolysis (CSP by varying the deposition parameters like solvent, spray rate, pH of precursor, and so forth, have been used for this study. Variation in the deposition conditions has tremendous impact on the luminescence properties as well as resistivity. Two emissions could be recorded for all samples—the near band edge emission (NBE at 380 nm and the deep level emission (DLE at ~500 nm which are competing in nature. It is observed that the ratio of intensities of DLE to NBE (/ can be reduced by controlling oxygen incorporation in the sample. - measurements indicate that restricting oxygen incorporation reduces resistivity considerably. Variation of / and resistivity for samples prepared under different deposition conditions is similar in nature. / was always less than resistivity by an order for all samples. Thus from PL measurements alone, the order of resistivity of the samples can be estimated.

Replication of innovation in professional service firms: options for leveraging knowledge

NARCIS (Netherlands)

Tuominen, T.; van der Aa, W.

2013-01-01

In this conceptual paper we elaborate on the replication of innovation in professional service firms (PSFs). We do this by integrating literature streams on replication, knowledge sharing, productization of services and management of PSF’s. First we discuss the object of replication in order to

Bacterial Preferences for Specific Soil Particle Size Fractions Revealed by Community Analyses

DEFF Research Database (Denmark)

Hemkemeyer, Michael; Dohrmann, Anja B.; Christensen, Bent Tolstrup

2018-01-01

, while Gemmatimonadales preferred coarse silt, Actinobacteria and Nitrosospira fine silt, and Planctomycetales clay. Firmicutes were depleted in the sand-sized fraction. In contrast, archaea, which represented 0.8% of all 16S rRNA gene sequences, showed only little preference for specific PSFs. We...

Final touch for a new electricity supervision system; Siste finpuss for nytt eltilsyn

Energy Technology Data Exchange (ETDEWEB)

Valestrand, Morten

2006-07-01

The local electricity supervision in Norway has up until now been organized in an unclear manner. A new regime is about to be established, and will provide the electricity industry with clearer regulations. DSB (Directorate for Civil Protection and Emergency Planning) will have the supervisory control, and the local supervising authority (DLE) will be managed by the network companies.

Status of peatland degradation and development in Sumatra and Kalimantan.

Science.gov (United States)

Miettinen, Jukka; Liew, Soo Chin

2010-01-01

Peatlands cover around 13 Mha in Sumatra and Kalimantan, Indonesia. Human activities have rapidly increased in the peatland ecosystems during the last two decades, invariably degrading them and making them vulnerable to fires. This causes high carbon emissions that contribute to global climate change. For this article, we used 94 high resolution (10-20 m) satellite images to map the status of peatland degradation and development in Sumatra and Kalimantan using visual image interpretation. The results reveal that less than 4% of the peatland areas remain covered by pristine peatswamp forests (PSFs), while 37% are covered by PSFs with varying degree of degradation. Furthermore, over 20% is considered to be unmanaged degraded landscape, occupied by ferns, shrubs and secondary growth. This alarming extent of degradation makes peatlands vulnerable to accelerated peat decomposition and catastrophic fire episodes that will have global consequences. With on-going degradation and development the existence of the entire tropical peatland ecosystem in this region is in great danger.

Krig

DEFF Research Database (Denmark)

Fahrendorff, Lars

10 interviews med humanistiske forskere ved Aarhus Universitet om krig i fortid og nutid. Om den ædle kriger, når ære dræber, krig i film, trangen til hævn, besættelsen der aldrig hører op, kunst og krig, fodboldkrigere og meget mere.Bogen er et led i Det Humanistiske Fakultets forskningsformidli...

My country right and wrong

DEFF Research Database (Denmark)

Willert, Søren

2016-01-01

ædle motiver, der driver nødhjælpsarbejde og nødhjælpsorganisationer, samtidig med, at han på den anden side kan fyldes af selvbebrejdelser, ja selvhad, når han, som det hele tiden sker, tvinges til at give afslag til enkeltpersoner i nød. Nødhjælpsarbejderens bestræbelser på fastholdelse af moralsk...

Využití Balanced ScoreCard k měření výkonnosti procesů agentury CzechTrade

OpenAIRE

Achrerová, Gabriela Bc.

2007-01-01

Teoretická část: měření výkonnosti procesů v systémech managementu jakosti dle ISO 9001:2000 Aplikační část: charakteristika agentury, procesy agentury, stávající metodika Balanced ScoreCard, návrh nové metodiky Balanced ScoreCard v návaznosti na novou strategii

High precision wavefront control in point spread function engineering for single emitter localization

NARCIS (Netherlands)

Siemons, M.E.; Thorsen, R.Ø; Smith, C.S.; Stallinga, S.

2018-01-01

Point spread function (PSF) engineering is used in single emitter localization to measure the emitter position in 3D and possibly other parameters such as the emission color or dipole orientation as well. Advanced PSF models such as spline fits to experimental PSFs or the vectorial PSF model can

Structure and morphology of magnetron sputter deposited ultrathin ZnO films on confined polymeric template

Science.gov (United States)

Singh, Ajaib; Schipmann, Susanne; Mathur, Aakash; Pal, Dipayan; Sengupta, Amartya; Klemradt, Uwe; Chattopadhyay, Sudeshna

2017-08-01

The structure and morphology of ultra-thin zinc oxide (ZnO) films with different film thicknesses on confined polymer template were studied through X-ray reflectivity (XRR) and grazing incidence small angle X-ray scattering (GISAXS). Using magnetron sputter deposition technique ZnO thin films with different film thicknesses (weight of polystyrene). The detailed internal structure, along the surface/interfaces and the growth direction of the system were explored in this study, which provides insight into the growth procedure of ZnO on confined polymer and reveals that a thin layer of ZnO, with very low surface and interface roughness, can be grown by DC magnetron sputtering technique, with approximately full coverage (with bulk like electron density) even in nm order of thickness, in 2-7 nm range on confined polymer template, without disturbing the structure of the underneath template. The resulting ZnO-polystyrene hybrid systems show strong ZnO near band edge (NBE) and deep-level (DLE) emissions in their room temperature photoluminescence spectra, where the contribution of DLE gets relatively stronger with decreasing ZnO film thickness, indicating a significant enhancement of surface defects because of the greater surface to volume ratio in thinner films.

Didáctica de la lectura basada en metacognición Reading didactics based on metacognition

Directory of Open Access Journals (Sweden)

Álvaro William Santiago Galvis

2009-12-01

Full Text Available Este texto presenta parte de los resultados que se obtuvieron en la realización del proyecto de investigación: "Diseño, elaboración y validación de una propuesta para la didáctica de la lectura fundamentada en metacognición para la educación básica", DLE-031-06. Para ello, se da cuenta de los objetivos propuestos, la metodología y los instrumentos que se utilizaron para el desarrollo del proyecto y los resultados que se obtuvieron de la aplicación del cuestionario metacognitivo, el cual formó parte del proceso de intervención didácticaThis article presents some of the results that were obtained in the development of the research project "Design, elaboration and validation of a didactics proposal of reading based on metacognition for elementary education", DLE-031-06. For this reason, the report includes the proposed objectives, the methodology and the instruments that were implemented for the development of the project; the results that were collected in the application of the metacognitive survey, which was a very important component during the second phase of the project

Effects of Post Heat Treatments on ZnO Thin-Films Grown on Zn-coated Teflon Substrates

Energy Technology Data Exchange (ETDEWEB)

Kim, Ikhyun; Nam, Giwoong; Lee, Cheoleon; Kim, Dongwhan; Choi, Hyonkwang; Kim, Yangsoo; Leem, Jae-Young [Inje University, Gimhae (Korea, Republic of); Kim, Jin Soo [Chonbuk National University, Jeonju (Korea, Republic of); Kim, Jong Su [Yeungnam University, Gyeongsan (Korea, Republic of); Son, Jeong-Sik [Kyungwoon University, Gumi (Korea, Republic of)

2015-06-15

ZnO thin films were first grown on Zn-coated Teflon substrates using a spin-coating method, with various post-heating temperatures. The structural and optical properties of the ZnO thin films were then investigated using field-effect scanning-electron microscopy, X-ray diffractometry, and photoluminescence (PL) spectroscopy. The surface morphology of these ZnO thin films exhibited dendritic structures. With increasing post-heating temperature, all samples preferentially exhibited preferential c-axis orientation and increased residual tensile stress. All of the films exhibited preferential c-axis orientation, and the residual tensile stress of those increased with increasing post-heating temperature. The near-band-edge emission (NBE) peaks were red-shifted after post-heating treatment at 400 ℃. The intensity of the deep-level emission (DLE) peaks gradually decreased with increasing post- heating temperature. Moreover, the narrowest ‘full width at half maximum’ (FWHM) and the highest intensity ratio of the NBE to the DLE for thin films, were observed after post-heating at 400 ℃. The ZnO thin films fabricated with the 400 ℃ post-heating process provided the highest crystallinity and optical properties.

FLAT TIME-LIKE SUBMANIFOLDS IN ANTI-DE SITTER SPACE H12n-1(-1)

Institute of Scientific and Technical Information of China (English)

ZUO DAFENG; CHEN QING; CHENG YI

2005-01-01

By using dressing actions of the Gn-1 1,1,n-1-system, the authors study geometric transformations for flat time-like n-submanifolds with flat, non-degenerate normal bun dle in anti-de Sitter space H1 2n-1(-1), where G1,1 n-1,n-1= O(2n - 2, 2)/O(n - 1, 1) ×O(n - 1, 1).

Fractal Dimension and the Cantor Set

Indian Academy of Sciences (India)

IAS Admin

S Smith. dimension'). We now give two examples of such objects to show that this notion is not vacuous. Cantor Set. Start with the unit interval [0, 1]. Delete the open mid- dle third of the segment, leaving behind two closed seg- ments: [0, 1/3] and [2/3, 1]. Note that, each has length. 1/3. Repeat the same construction for each ...

Multiline 3D beamforming using micro-beamformed datasets for pediatric transesophageal echocardiography

Science.gov (United States)

Bera, D.; Raghunathan, S. B.; Chen, C.; Chen, Z.; Pertijs, M. A. P.; Verweij, M. D.; Daeichin, V.; Vos, H. J.; van der Steen, A. F. W.; de Jong, N.; Bosch, J. G.

2018-04-01

Until now, no matrix transducer has been realized for 3D transesophageal echocardiography (TEE) in pediatric patients. In 3D TEE with a matrix transducer, the biggest challenges are to connect a large number of elements to a standard ultrasound system, and to achieve a high volume rate (>200 Hz). To address these issues, we have recently developed a prototype miniaturized matrix transducer for pediatric patients with micro-beamforming and a small central transmitter. In this paper we propose two multiline parallel 3D beamforming techniques (µBF25 and µBF169) using the micro-beamformed datasets from 25 and 169 transmit events to achieve volume rates of 300 Hz and 44 Hz, respectively. Both the realizations use angle-weighted combination of the neighboring overlapping sub-volumes to avoid artifacts due to sharp intensity changes introduced by parallel beamforming. In simulation, the image quality in terms of the width of the point spread function (PSF), lateral shift invariance and mean clutter level for volumes produced by µBF25 and µBF169 are similar to the idealized beamforming using a conventional single-line acquisition with a fully-sampled matrix transducer (FS4k, 4225 transmit events). For completeness, we also investigated a 9 transmit-scheme (3  ×  3) that allows even higher frame rates but found worse B-mode image quality with our probe. The simulations were experimentally verified by acquiring the µBF datasets from the prototype using a Verasonics V1 research ultrasound system. For both µBF169 and µBF25, the experimental PSFs were similar to the simulated PSFs, but in the experimental PSFs, the clutter level was ~10 dB higher. Results indicate that the proposed multiline 3D beamforming techniques with the prototype matrix transducer are promising candidates for real-time pediatric 3D TEE.

High precision wavefront control in point spread function engineering for single emitter localization

Science.gov (United States)

Siemons, M.; Hulleman, C. N.; Thorsen, R. Ø.; Smith, C. S.; Stallinga, S.

2018-04-01

Point Spread Function (PSF) engineering is used in single emitter localization to measure the emitter position in 3D and possibly other parameters such as the emission color or dipole orientation as well. Advanced PSF models such as spline fits to experimental PSFs or the vectorial PSF model can be used in the corresponding localization algorithms in order to model the intricate spot shape and deformations correctly. The complexity of the optical architecture and fit model makes PSF engineering approaches particularly sensitive to optical aberrations. Here, we present a calibration and alignment protocol for fluorescence microscopes equipped with a spatial light modulator (SLM) with the goal of establishing a wavefront error well below the diffraction limit for optimum application of complex engineered PSFs. We achieve high-precision wavefront control, to a level below 20 m$\\lambda$ wavefront aberration over a 30 minute time window after the calibration procedure, using a separate light path for calibrating the pixel-to-pixel variations of the SLM, and alignment of the SLM with respect to the optical axis and Fourier plane within 3 $\\mu$m ($x/y$) and 100 $\\mu$m ($z$) error. Aberrations are retrieved from a fit of the vectorial PSF model to a bead $z$-stack and compensated with a residual wavefront error comparable to the error of the SLM calibration step. This well-calibrated and corrected setup makes it possible to create complex `3D+$\\lambda$' PSFs that fit very well to the vectorial PSF model. Proof-of-principle bead experiments show precisions below 10~nm in $x$, $y$, and $\\lambda$, and below 20~nm in $z$ over an axial range of 1 $\\mu$m with 2000 signal photons and 12 background photons.

GPU-based simulation of optical propagation through turbulence for active and passive imaging

Science.gov (United States)

Monnier, Goulven; Duval, François-Régis; Amram, Solène

2014-10-01

IMOTEP is a GPU-based (Graphical Processing Units) software relying on a fast parallel implementation of Fresnel diffraction through successive phase screens. Its applications include active imaging, laser telemetry and passive imaging through turbulence with anisoplanatic spatial and temporal fluctuations. Thanks to parallel implementation on GPU, speedups ranging from 40X to 70X are achieved. The present paper gives a brief overview of IMOTEP models, algorithms, implementation and user interface. It then focuses on major improvements recently brought to the anisoplanatic imaging simulation method. Previously, we took advantage of the computational power offered by the GPU to develop a simulation method based on large series of deterministic realisations of the PSF distorted by turbulence. The phase screen propagation algorithm, by reproducing higher moments of the incident wavefront distortion, provides realistic PSFs. However, we first used a coarse gaussian model to fit the numerical PSFs and characterise there spatial statistics through only 3 parameters (two-dimensional displacements of centroid and width). Meanwhile, this approach was unable to reproduce the effects related to the details of the PSF structure, especially the "speckles" leading to prominent high-frequency content in short-exposure images. To overcome this limitation, we recently implemented a new empirical model of the PSF, based on Principal Components Analysis (PCA), ought to catch most of the PSF complexity. The GPU implementation allows estimating and handling efficiently the numerous (up to several hundreds) principal components typically required under the strong turbulence regime. A first demanding computational step involves PCA, phase screen propagation and covariance estimates. In a second step, realistic instantaneous images, fully accounting for anisoplanatic effects, are quickly generated. Preliminary results are presented.

3D single-molecule super-resolution microscopy with a tilted light sheet.

Science.gov (United States)

Gustavsson, Anna-Karin; Petrov, Petar N; Lee, Maurice Y; Shechtman, Yoav; Moerner, W E

2018-01-09

Tilted light sheet microscopy with 3D point spread functions (TILT3D) combines a novel, tilted light sheet illumination strategy with long axial range point spread functions (PSFs) for low-background, 3D super-localization of single molecules as well as 3D super-resolution imaging in thick cells. Because the axial positions of the single emitters are encoded in the shape of each single-molecule image rather than in the position or thickness of the light sheet, the light sheet need not be extremely thin. TILT3D is built upon a standard inverted microscope and has minimal custom parts. The result is simple and flexible 3D super-resolution imaging with tens of nm localization precision throughout thick mammalian cells. We validate TILT3D for 3D super-resolution imaging in mammalian cells by imaging mitochondria and the full nuclear lamina using the double-helix PSF for single-molecule detection and the recently developed tetrapod PSFs for fiducial bead tracking and live axial drift correction.

Area Handbook Series: Iraq: A Country Study

Science.gov (United States)

1988-05-01

also was killed after attempting to escape disguised as a veiled woman . In the ensuing mob demonstrations against the old order, angry crowds severely...the Mid- dle Ages. 86 The Society and Its Environment The Ottoman Empire organized society around the concept of the millet , or autonomous religious...major industry subsectors, such as spinning and weaving, chemicals, and engineering. Factory managers were given some autonomy, and an effort was made

Effects of ultraviolet radiation on viability of isolated Beta vulgaris and Hordeum vulgare protoplasts

International Nuclear Information System (INIS)

Bornman, J.F.; Bjoern, L.O.; Bornman, C.H.

1982-01-01

Estimates of viability as measured by vital straining with fluorescein diacetate were carried out on freshly isolated and partially aged (16-hour-old) Beta vulgaris and Hordeum vulgare mesophyll protoplasts following irradiation with UV-B. Damage to the photosynthetic system by UV-B was determined by delayed light emission (DLE). In the case of freshly isolated Protoplasts Beta was approximately 30% more susceptible than Hordeum following 3h irradiation, with viability decreasing from 90% to 40%. After storage of protoplasts on ice for 16 h UV-B radiation markedly depressed viability in both species, but in the case of Hordeum there was a substantial initial loss of nearly 70% in viability over the first hour of irradiation. The first 10 min of UV-B radiation decreased the intensity of DLE by 40% without appreciably affecting the decay rate. Longer treatment times did not give a proportional effect so that even after 60 min of UV-B the inhibition did not exceed 60%. This suggested that although the enzyme system responsible for FDA hydrolysis may be partially inactivated (viability was 75-80% as compared with 90% in the control), the UV-B did not penetrate the innermost parts of the chloroplasts, but left some thylakoids undamaged. (orig.)

ARCHERRT - a GPU-based and photon-electron coupled Monte Carlo dose computing engine for radiation therapy: software development and application to helical tomotherapy.

Science.gov (United States)

Su, Lin; Yang, Youming; Bednarz, Bryan; Sterpin, Edmond; Du, Xining; Liu, Tianyu; Ji, Wei; Xu, X George

2014-07-01

Using the graphical processing units (GPU) hardware technology, an extremely fast Monte Carlo (MC) code ARCHERRT is developed for radiation dose calculations in radiation therapy. This paper describes the detailed software development and testing for three clinical TomoTherapy® cases: the prostate, lung, and head & neck. To obtain clinically relevant dose distributions, phase space files (PSFs) created from optimized radiation therapy treatment plan fluence maps were used as the input to ARCHERRT. Patient-specific phantoms were constructed from patient CT images. Batch simulations were employed to facilitate the time-consuming task of loading large PSFs, and to improve the estimation of statistical uncertainty. Furthermore, two different Woodcock tracking algorithms were implemented and their relative performance was compared. The dose curves of an Elekta accelerator PSF incident on a homogeneous water phantom were benchmarked against DOSXYZnrc. For each of the treatment cases, dose volume histograms and isodose maps were produced from ARCHERRT and the general-purpose code, GEANT4. The gamma index analysis was performed to evaluate the similarity of voxel doses obtained from these two codes. The hardware accelerators used in this study are one NVIDIA K20 GPU, one NVIDIA K40 GPU, and six NVIDIA M2090 GPUs. In addition, to make a fairer comparison of the CPU and GPU performance, a multithreaded CPU code was developed using OpenMP and tested on an Intel E5-2620 CPU. For the water phantom, the depth dose curve and dose profiles from ARCHERRT agree well with DOSXYZnrc. For clinical cases, results from ARCHERRT are compared with those from GEANT4 and good agreement is observed. Gamma index test is performed for voxels whose dose is greater than 10% of maximum dose. For 2%/2mm criteria, the passing rates for the prostate, lung case, and head & neck cases are 99.7%, 98.5%, and 97.2%, respectively. Due to specific architecture of GPU, modified Woodcock tracking algorithm

ARCHERRT – A GPU-based and photon-electron coupled Monte Carlo dose computing engine for radiation therapy: Software development and application to helical tomotherapy

Science.gov (United States)

Su, Lin; Yang, Youming; Bednarz, Bryan; Sterpin, Edmond; Du, Xining; Liu, Tianyu; Ji, Wei; Xu, X. George

2014-01-01

Purpose: Using the graphical processing units (GPU) hardware technology, an extremely fast Monte Carlo (MC) code ARCHERRT is developed for radiation dose calculations in radiation therapy. This paper describes the detailed software development and testing for three clinical TomoTherapy® cases: the prostate, lung, and head & neck. Methods: To obtain clinically relevant dose distributions, phase space files (PSFs) created from optimized radiation therapy treatment plan fluence maps were used as the input to ARCHERRT. Patient-specific phantoms were constructed from patient CT images. Batch simulations were employed to facilitate the time-consuming task of loading large PSFs, and to improve the estimation of statistical uncertainty. Furthermore, two different Woodcock tracking algorithms were implemented and their relative performance was compared. The dose curves of an Elekta accelerator PSF incident on a homogeneous water phantom were benchmarked against DOSXYZnrc. For each of the treatment cases, dose volume histograms and isodose maps were produced from ARCHERRT and the general-purpose code, GEANT4. The gamma index analysis was performed to evaluate the similarity of voxel doses obtained from these two codes. The hardware accelerators used in this study are one NVIDIA K20 GPU, one NVIDIA K40 GPU, and six NVIDIA M2090 GPUs. In addition, to make a fairer comparison of the CPU and GPU performance, a multithreaded CPU code was developed using OpenMP and tested on an Intel E5-2620 CPU. Results: For the water phantom, the depth dose curve and dose profiles from ARCHERRT agree well with DOSXYZnrc. For clinical cases, results from ARCHERRT are compared with those from GEANT4 and good agreement is observed. Gamma index test is performed for voxels whose dose is greater than 10% of maximum dose. For 2%/2mm criteria, the passing rates for the prostate, lung case, and head & neck cases are 99.7%, 98.5%, and 97.2%, respectively. Due to specific architecture of GPU, modified

Effect of ALD surface treatment on structural and optical properties of ZnO nanorods

Energy Technology Data Exchange (ETDEWEB)

Jang, Jin-Tak [Department of Nano Systems Engineering, Center for Nano Manufacturing, Inje University, Obang-dong, Gimhae, Gyeongnam 621-749 (Korea, Republic of); Ryu, Hyukhyun, E-mail: hhryu@inje.ac.kr [Department of Nano Systems Engineering, Center for Nano Manufacturing, Inje University, Obang-dong, Gimhae, Gyeongnam 621-749 (Korea, Republic of); Lee, Won-Jae [Department of Materials and Components Engineering, Dong-Eui University, 995 Eomgwangno, Busanjin-gu, Busan 614-714 (Korea, Republic of)

2013-07-01

In this study, we report on the improvement of the optical and structural properties of ZnO nanorods using atomic layer deposition (ALD) on seed ZnO nanorods. After the initial growth of ZnO seed nanorods by hydrothermal synthesis for 1 h, a ZnO layer with a thickness of 10 nm was deposited on the initial ZnO seed nanorods using ALD. Then ZnO was further grown by hydrothermal synthesis for 4 h. The samples were characterized using room temperature photoluminescence (PL), field emission-scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD). From this experiment, it was found that the ZnO nanorods with the ALD surface treatment show improved optical and structural properties when compared with the ZnO nanorods grown only by hydrothermal synthesis. The ZnO nanorods with the ALD surface treatment show about 2.7 times higher XRD (0 0 2) peak intensity, about 2.64 times higher PL NBE peak intensity, and about 3.1 times better NBE/DLE ratio than the ZnO nanorods without an ALD surface treatment.

Energy diffusion and the butterfly effect in inhomogeneous Sachdev-Ye-Kitaev chains

Directory of Open Access Journals (Sweden)

Yingfei Gu, Andrew Lucas, Xiao-Liang Qi

2017-05-01

Full Text Available We compute the energy diffusion constant $D$, Lyapunov time $\\tau_{\\text{L}}$ and butterfly velocity $v_{\\text{B}}$ in an inhomogeneous chain of coupled Majorana Sachdev-Ye-Kitaev (SYK models in the large $N$ and strong coupling limit. We find $D\\le v_{\\text{B}}^2 \\tau_{\\text{L}}$ from a combination of analytical and numerical approaches. Our example necessitates the sharpening of postulated transport bounds based on quantum chaos.

Quantum Optoelectronics. Postconference Edition. Organization of the 1993 Photonics Science Topical Meetings Held in Palm Springs, California on March 17 - 19, 1993. Technical Digest Series, Volume 8

Science.gov (United States)

1993-03-19

Y.Yamamoto 2 we carried out a comprehensive quantuwn mechanical treatment of SL with DLE and obtained power spectra of the fluctuating operators of amplitude...systems and concentrate on the reduced electron-acoustic phonon relaxation in quantum-boxes, evidencing a critical level separation Ecrit of the...cascade down tens or hundreds of box levels to reach the ground state(s) of interest. Then, any level separation exceeding Ecrit behaves as a bottleneck

Analysis of Operators Comments on the PSF Questionnaire of the Task Complexity Experiment 2003/2004

Energy Technology Data Exchange (ETDEWEB)

Torralba, B.; Martinez-Arias, R.

2007-07-01

Human Reliability Analysis (HRA) methods usually take into account the effect of Performance Shaping Factors (PSF). Therefore, the adequate treatment of PSFs in HRA of Probabilistic Safety Assessment (PSA) models has a crucial importance. There is an important need for collecting PSF data based on simulator experiments. During the task complexity experiment 2003-2004, carried out in the BWR simulator of Halden Man-Machine Laboratory (HAMMLAB), there was a data collection on PSF by means of a PSF Questionnaire. Seven crews (composed of shift supervisor, reactor operator and turbine operator) from Swedish Nuclear Power Plants participated in the experiment. The PSF Questionnaire collected data on the factors: procedures, training and experience, indications, controls, team management, team communication, individual work practice, available time for the tasks, number of tasks or information load, masking and seriousness. The main statistical significant results are presented on Performance Shaping Factors data collection and analysis of the task complexity experiment 2003/2004 (HWR-810). The analysis of the comments about PSFs, which were provided by operators on the PSF Questionnaire, is described. It has been summarised the comments provided for each PSF on the scenarios, using a content analysis technique. (Author)

Measurement of spatial dose-rate distribution using a position sensitive detector

International Nuclear Information System (INIS)

Emoto, T.; Torii, T.; Nozaki, T.; Ando, H.

1994-01-01

Recently, the radiation detectors using plastic scintillation fibers (PSF) have been developed to measure the positions exposed to radiation such as neutrons and high energy charged particles. In particular, the time of flight (TOF) method for measuring the difference of time that two directional signals of scintillation light reach both ends of a PSF is a rather simple method for the measurement of the spatial distribution of fast neutron fluence rate. It is possible to use the PSF in nuclear facility working areas because of its flexibility, small diameter and long length. In order to apply TOF method to measure spatial gamma dose rate distribution, the characteristic tests of a detector using PSFs were carried out. First, the resolution of irradiated positions and the counting efficiency were measured with collimated gamma ray. The sensitivity to unit dose rate was also obtained. The measurement of spatial dose rate distribution was also carried out. The sensor is made of ten bundled PSFs, and the experimental setup is described. The experiment and the results are reported. It was found that the PSF detector has the good performance to measure spatial gamma dose rate distribution. (K.I.)

Imaging characteristics of Zernike and annular polynomial aberrations.

Science.gov (United States)

Mahajan, Virendra N; Díaz, José Antonio

2013-04-01

The general equations for the point-spread function (PSF) and optical transfer function (OTF) are given for any pupil shape, and they are applied to optical imaging systems with circular and annular pupils. The symmetry properties of the PSF, the real and imaginary parts of the OTF, and the modulation transfer function (MTF) of a system with a circular pupil aberrated by a Zernike circle polynomial aberration are derived. The interferograms and PSFs are illustrated for some typical polynomial aberrations with a sigma value of one wave, and 3D PSFs and MTFs are shown for 0.1 wave. The Strehl ratio is also calculated for polynomial aberrations with a sigma value of 0.1 wave, and shown to be well estimated from the sigma value. The numerical results are compared with the corresponding results in the literature. Because of the same angular dependence of the corresponding annular and circle polynomial aberrations, the symmetry properties of systems with annular pupils aberrated by an annular polynomial aberration are the same as those for a circular pupil aberrated by a corresponding circle polynomial aberration. They are also illustrated with numerical examples.

Analysis of Operators Comments on the PSF Questionnaire of the Task Complexity Experiment 2003/2004

International Nuclear Information System (INIS)

Torralba, B.; Martinez-Arias, R.

2007-01-01

Human Reliability Analysis (HRA) methods usually take into account the effect of Performance Shaping Factors (PSF). Therefore, the adequate treatment of PSFs in HRA of Probabilistic Safety Assessment (PSA) models has a crucial importance. There is an important need for collecting PSF data based on simulator experiments. During the task complexity experiment 2003-2004, carried out in the BWR simulator of Halden Man-Machine Laboratory (HAMMLAB), there was a data collection on PSF by means of a PSF Questionnaire. Seven crews (composed of shift supervisor, reactor operator and turbine operator) from Swedish Nuclear Power Plants participated in the experiment. The PSF Questionnaire collected data on the factors: procedures, training and experience, indications, controls, team management, team communication, individual work practice, available time for the tasks, number of tasks or information load, masking and seriousness. The main statistical significant results are presented on Performance Shaping Factors data collection and analysis of the task complexity experiment 2003/2004 (HWR-810). The analysis of the comments about PSFs, which were provided by operators on the PSF Questionnaire, is described. It has been summarised the comments provided for each PSF on the scenarios, using a content analysis technique. (Author)

Quenching of surface traps in Mn doped ZnO thin films for enhanced optical transparency

International Nuclear Information System (INIS)

Ilyas, Usman; Rawat, R.S.; Roshan, G.; Tan, T.L.; Lee, P.; Springham, S.V.; Zhang, Sam; Fengji Li; Chen, R.; Sun, H.D.

2011-01-01

The structural and photoluminescence analyses were performed on un-doped and Mn doped ZnO thin films grown on Si (1 0 0) substrate by pulsed laser deposition (PLD) and annealed at different post-deposition temperatures (500-800 deg. C). X-ray diffraction (XRD), employed to study the structural properties, showed an improved crystallinity at elevated temperatures with a consistent decrease in the lattice parameter 'c'. The peak broadening in XRD spectra and the presence of Mn 2p3/2 peak at ∼640 eV in X-ray Photoelectron Spectroscopic (XPS) spectra of the doped thin films confirmed the successful incorporation of Mn in ZnO host matrix. Extended near band edge emission (NBE) spectra indicated the reduction in the concentration of the intrinsic surface traps in comparison to the doped ones resulting in improved optical transparency. Reduced deep level emission (DLE) spectra in doped thin films with declined PL ratio validated the quenching of the intrinsic surface traps thereby improving the optical transparency and the band gap, essential for optoelectronic and spintronic applications. Furthermore, the formation and uniform distribution of nano-sized grains with improved surface features of Mn-doped ZnO thin films were observed in Field Emission Scanning Electron Microscopy (FESEM) images.

A MAP blind image deconvolution algorithm with bandwidth over-constrained

Science.gov (United States)

Ren, Zhilei; Liu, Jin; Liang, Yonghui; He, Yulong

2018-03-01

We demonstrate a maximum a posteriori (MAP) blind image deconvolution algorithm with bandwidth over-constrained and total variation (TV) regularization to recover a clear image from the AO corrected images. The point spread functions (PSFs) are estimated by bandwidth limited less than the cutoff frequency of the optical system. Our algorithm performs well in avoiding noise magnification. The performance is demonstrated on simulated data.

Quantum Optoelectronics Technical Digest, 1993. Volume 8. Postconference Edition. Summaries of Papers Presented at the Quantum Optoelectronics Topical Meeting Held in Palm Springs, California on March 17-19, 1993.

Science.gov (United States)

1993-01-01

Y.Yamamoto 2 we carried out a comprehensive quantum mechanical treatment of SL with DLE and obtained power spectra of the fluctuating operators of amplitude...in quantum-boxes, evidencing a critical level separation Ecrit of the order of only 1 meV above which relaxation vanishes in the two-level case. When...interest. Then, any level separation exceeding Ecrit behaves as a bottleneck. To predict the overall effect of such bottle- necks and cast them into a

Community-level plant-soil feedbacks explain landscape distribution of native and non-native plants.

Science.gov (United States)

Kulmatiski, Andrew

2018-02-01

Plant-soil feedbacks (PSFs) have gained attention for their potential role in explaining plant growth and invasion. While promising, most PSF research has measured plant monoculture growth on different soils in short-term, greenhouse experiments. Here, five soil types were conditioned by growing one native species, three non-native species, or a mixed plant community in different plots in a common-garden experiment. After 4 years, plants were removed and one native and one non-native plant community were planted into replicate plots of each soil type. After three additional years, the percentage cover of each of the three target species in each community was measured. These data were used to parameterize a plant community growth model. Model predictions were compared to native and non-native abundance on the landscape. Native community cover was lowest on soil conditioned by the dominant non-native, Centaurea diffusa , and non-native community cover was lowest on soil cultivated by the dominant native, Pseudoroegneria spicata . Consistent with plant growth on the landscape, the plant growth model predicted that the positive PSFs observed in the common-garden experiment would result in two distinct communities on the landscape: a native plant community on native soils and a non-native plant community on non-native soils. In contrast, when PSF effects were removed, the model predicted that non-native plants would dominate all soils, which was not consistent with plant growth on the landscape. Results provide an example where PSF effects were large enough to change the rank-order abundance of native and non-native plant communities and to explain plant distributions on the landscape. The positive PSFs that contributed to this effect reflected the ability of the two dominant plant species to suppress each other's growth. Results suggest that plant dominance, at least in this system, reflects the ability of a species to suppress the growth of dominant competitors

Evaluation of aqueous extracts of Taraxacum officinale on growth and invasion of breast and prostate cancer cells.

Science.gov (United States)

Sigstedt, Sophia C; Hooten, Carla J; Callewaert, Manika C; Jenkins, Aaron R; Romero, Anntherese E; Pullin, Michael J; Kornienko, Alexander; Lowrey, Timothy K; Slambrouck, Severine Van; Steelant, Wim F A

2008-05-01

Ethnotraditional use of plant-derived natural products plays a significant role in the discovery and development of potential medicinal agents. Plants of the genus Taraxacum, commonly known as dandelions, have a history of use in Chinese, Arabian and Native American traditional medicine, to treat a variety of diseases including cancer. To date, however, very few studies have been reported on the anti-carcinogenic activity of Taraxacum officinale (TO). In the present study, three aqueous extracts were prepared from the mature leaves, flowers and roots, and investigated on tumor progression related processes such as proliferation and invasion. Our results show that the crude extract of dandelion leaf (DLE) decreased the growth of MCF-7/AZ breast cancer cells in an ERK-dependent manner, whereas the aqueous extracts of dandelion flower (DFE) and root (DRE) had no effect on the growth of either cell line. Furthermore, DRE was found to block invasion of MCF-7/AZ breast cancer cells while DLE blocked the invasion of LNCaP prostate cancer cells, into collagen type I. Inhibition of invasion was further evidenced by decreased phosphorylation levels of FAK and src as well as reduced activities of matrix metalloproteinases, MMP-2 and MMP-9. This study provides new scientific data on TO and suggests that TO extracts or individual components present in the extracts may be of value as novel anti-cancer agents.

Suppression of Na interstitials in Na-F codoped ZnO

Science.gov (United States)

Huo, Wenxing; Mei, Zengxia; Tang, Aihua; Liang, Huili; Du, Xiaolong

2018-04-01

Controlling the formation of interstitial Na (Nai) self-compensating defects has been a long-term physics problem for effective Na doping in ZnO. Herein, we present an experimental approach to the suppression of Nai defects in ZnO via Na and F codoping under an oxygen-rich condition during the molecular beam epitaxy growth process. It is found that the incorporation of such large numbers of Na and F dopants (˜1020 cm-3) does not cause an obvious influence on the lattice parameters. Hall-effect measurements demonstrate that F doping efficiently raises the Fermi level (EF) of ZnO films, which is expected to make the formation energy of Nai and NaZn increase and decrease, respectively. Most of the Na atoms occupy the substitutional Zn sites, and the formation of Nai is suppressed consequently. Secondary ion mass spectrometry measurements reveal that F and Na atoms are tightly bonded together due to their strong Coulomb interaction. The enhanced deep level emission (DLE) in ZnO:Na-F is ascribed to the considerable amount of isolated Zn vacancy (VZn) defects induced by the elevated EF and the formation of neutral (" separators="| FO + - Na Zn - ) 0 complexes. On the other hand, formation of (" separators="| FO + - VZn 2 - ) - complexes in ZnO:F exhausts most of the isolated Zn vacancies, leading to the disappearance of the DLE band.

[Soluble interleukin 2 receptor as activity parameter in serum of systemic and discoid lupus erythematosus].

Science.gov (United States)

Blum, C; Zillikens, D; Tony, H P; Hartmann, A A; Burg, G

1993-05-01

The evaluation of disease activity in systemic lupus erythematosus (SLE) is important for selection of the appropriate therapeutic regimen. In addition to the clinical picture, various laboratory parameters are taken into account. However, no validated criteria for the evaluation of the disease activity in SLE have yet been established. Recently, serum levels of soluble interleukin-2 receptor (sIL-2R) have been proposed as a potential parameter for disease activity in SLE. However, the studies reported on this subject so far have focused mainly on certain subsets of the disease, and the evaluation of the disease activity was based on a very limited number of parameters. In the present study, we determined serum levels of sIL-2R in 23 patients with SLE and 30 patients with discoid LE (DLE). Evaluation of disease activity in SLE was based on a comprehensive scale which considered numerous clinical signs and laboratory parameters. In SLE, serum levels of sIL-2R showed a better correlation with disease activity than all the other parameters investigated, including proteinuria, erythrocyte sedimentation rate, serum globulin concentration, titre of antibodies against double-stranded DNA, serum albumin concentration, serum complement levels and white blood cell count. For the first time, we report on elevated serum levels of sIL-2R in DLE, which also correlated with disease activity.

An Empirical Investigation of Strategic Planning in QS Practices

OpenAIRE

Murphy, Roisin

2012-01-01

The benefit of engaging in strategic planning has been well documented over several decades of strategic management research. Despite the significant body of existing knowledge in the field, there remains a limited collection of empirically tested research pertaining to strategic planning within professional service firms (PSFs) in construction, particularly from an Irish context. The research is an exploratory study involving in-depth, semi-structured interviews and a widespread survey of...

TIME MANAGEMENT - AN INSTRUMENT TO IMPROVE PRODUCTIVITY

Directory of Open Access Journals (Sweden)

Johan Nortje

2012-01-01

Full Text Available

ENGLISH ABSTRACT: TIME is an Important element in any persons life as a plannlng mechanlsm to meaningfully organIse activities, or to ensure that a oroject runs WIth but also as a generator of destructive forces over it is lost. In the process of growth and progress ln a dynamIC everchanging envIronment. tIme not only becomes dearer to management, but also $carcet-, and an era of "time poverty" is experienced by many. A varIety of uncontrollable factors may be the cause of such problems, but a danger eXIsts that those factors over which control may be exercised could be lost within the uncontrol labie ones. The objective of this artIcle on tIme management is then to assist in identIfying those "barriers" which lead to "time pover'ty", how to avoid and prevent tIme wastage and apply methods, and make use of ways to promote the effective use of tIme.

A multimodal physical therapy approach to the management of a patient with temporomandibular dysfunction and head and neck lymphedema: a case report.

Science.gov (United States)

Crane, Patricia; Feinberg, Lauren; Morris, John

2015-02-01

There is a paucity of research that investigates therapeutic interventions of patients with concurrent head and neck lymphedema and temporomandibular dysfunction (TMD). The purpose of this case report is to describe the management and outcomes of a patient with head and neck lymphedema and TMD using a multimodal physical therapy approach. A 74-year-old male with a past medical history of head and neck lymphedema and TMD was referred to physical therapy with chief complaints of inability to open his mouth in order to eat solid food, increased neck lymphedema, temporomadibular joint pain, and inability to speak for prolonged periods of time. The patient was treated for three visits over 4 weeks. Treatment included complete decongestive therapy (CDT), manual therapy, therapeutic exercise, and a home exercise program. Upon discharge, the patient had improved mandibular depression, decreased head and neck lymphedema, improved deep neck flexor endurance, decreased pain, and improved function on the Patient Specific Functional Scale (PSFS). Utilization of a multimodal physical therapy approach to treat a patient with a complex presentation yielded positive outcomes. Further research on outcomes and treatment approaches in patients with TMD and head and neck lymphedema is warranted.

ARCHERRT – A GPU-based and photon-electron coupled Monte Carlo dose computing engine for radiation therapy: Software development and application to helical tomotherapy

International Nuclear Information System (INIS)

Su, Lin; Du, Xining; Liu, Tianyu; Ji, Wei; Xu, X. George; Yang, Youming; Bednarz, Bryan; Sterpin, Edmond

2014-01-01

Purpose: Using the graphical processing units (GPU) hardware technology, an extremely fast Monte Carlo (MC) code ARCHER RT is developed for radiation dose calculations in radiation therapy. This paper describes the detailed software development and testing for three clinical TomoTherapy® cases: the prostate, lung, and head and neck. Methods: To obtain clinically relevant dose distributions, phase space files (PSFs) created from optimized radiation therapy treatment plan fluence maps were used as the input to ARCHER RT . Patient-specific phantoms were constructed from patient CT images. Batch simulations were employed to facilitate the time-consuming task of loading large PSFs, and to improve the estimation of statistical uncertainty. Furthermore, two different Woodcock tracking algorithms were implemented and their relative performance was compared. The dose curves of an Elekta accelerator PSF incident on a homogeneous water phantom were benchmarked against DOSXYZnrc. For each of the treatment cases, dose volume histograms and isodose maps were produced from ARCHER RT and the general-purpose code, GEANT4. The gamma index analysis was performed to evaluate the similarity of voxel doses obtained from these two codes. The hardware accelerators used in this study are one NVIDIA K20 GPU, one NVIDIA K40 GPU, and six NVIDIA M2090 GPUs. In addition, to make a fairer comparison of the CPU and GPU performance, a multithreaded CPU code was developed using OpenMP and tested on an Intel E5-2620 CPU. Results: For the water phantom, the depth dose curve and dose profiles from ARCHER RT agree well with DOSXYZnrc. For clinical cases, results from ARCHER RT are compared with those from GEANT4 and good agreement is observed. Gamma index test is performed for voxels whose dose is greater than 10% of maximum dose. For 2%/2mm criteria, the passing rates for the prostate, lung case, and head and neck cases are 99.7%, 98.5%, and 97.2%, respectively. Due to specific architecture of GPU

ARCHER{sub RT} – A GPU-based and photon-electron coupled Monte Carlo dose computing engine for radiation therapy: Software development and application to helical tomotherapy

Energy Technology Data Exchange (ETDEWEB)

Su, Lin; Du, Xining; Liu, Tianyu; Ji, Wei; Xu, X. George, E-mail: xug2@rpi.edu [Nuclear Engineering Program, Rensselaer Polytechnic Institute, Troy, New York 12180 (United States); Yang, Youming; Bednarz, Bryan [Medical Physics, University of Wisconsin, Madison, Wisconsin 53706 (United States); Sterpin, Edmond [Molecular Imaging, Radiotherapy and Oncology, Université catholique de Louvain, Brussels, Belgium 1348 (Belgium)

2014-07-15

Purpose: Using the graphical processing units (GPU) hardware technology, an extremely fast Monte Carlo (MC) code ARCHER{sub RT} is developed for radiation dose calculations in radiation therapy. This paper describes the detailed software development and testing for three clinical TomoTherapy® cases: the prostate, lung, and head and neck. Methods: To obtain clinically relevant dose distributions, phase space files (PSFs) created from optimized radiation therapy treatment plan fluence maps were used as the input to ARCHER{sub RT}. Patient-specific phantoms were constructed from patient CT images. Batch simulations were employed to facilitate the time-consuming task of loading large PSFs, and to improve the estimation of statistical uncertainty. Furthermore, two different Woodcock tracking algorithms were implemented and their relative performance was compared. The dose curves of an Elekta accelerator PSF incident on a homogeneous water phantom were benchmarked against DOSXYZnrc. For each of the treatment cases, dose volume histograms and isodose maps were produced from ARCHER{sub RT} and the general-purpose code, GEANT4. The gamma index analysis was performed to evaluate the similarity of voxel doses obtained from these two codes. The hardware accelerators used in this study are one NVIDIA K20 GPU, one NVIDIA K40 GPU, and six NVIDIA M2090 GPUs. In addition, to make a fairer comparison of the CPU and GPU performance, a multithreaded CPU code was developed using OpenMP and tested on an Intel E5-2620 CPU. Results: For the water phantom, the depth dose curve and dose profiles from ARCHER{sub RT} agree well with DOSXYZnrc. For clinical cases, results from ARCHER{sub RT} are compared with those from GEANT4 and good agreement is observed. Gamma index test is performed for voxels whose dose is greater than 10% of maximum dose. For 2%/2mm criteria, the passing rates for the prostate, lung case, and head and neck cases are 99.7%, 98.5%, and 97.2%, respectively. Due to

PSF support pilot program

Science.gov (United States)

Anderson, Jay

2013-10-01

The goal of this program is to observe the center of Omega Cen {which has a nice flat distribution of reasonably-spaced-out stars} in order to construct a PSF model for ACS's three workhorse filters: F435W, F606W, and F814W. These also happen to be the three ACS filters that will be used in the Frontier-Field program. PI-Anderson will use the data to consturct an 9x10 array of fiducial PSFs that describe the static variation of the PSF across the frame for each filter. He will also provide some simple routines that the public can use to insert PSFs into images.The observations will dither the center of the cluster around in a circle with a radius of about 30" such that any single star never falls in the ACS gap more than once. This has the additional benefit that we can use this large dither to validate or improve the distortion solution at the same time we are solving for the PSF. We will get four exposures through each of the ACS filters. The exposure times for the three ACS filters {F435W, F606W, and F814W} were chosen to maximize the number of bright unsaturated stars while simultaneously minimizing the number of saturated stars present. To do this, we made sure that the SGB {which is where the LF rises precipitously} is just below the saturation level. We used archival images from GO-9444 and GO-10775 to ensure that 339s for F435W, 80s in F606W, and 90s in F814W is perfect for this.In addition to the ACS exposures, we also take parallels with WFC3/IR. These exposures will sample a field that is 6' off center. The core radius is 2.5', so this outer field should have a density that is 5x lower than at the center, meaning the typical star is maybe 2.5x farther away. This should compensate for the larger WFC3/IR pixels and will allow us to construct PSFs that are appropriate. We take a total of 32 WFC3/IR exposures, each with an exposure time of 103s, and divide these 32 exposures among the four FF WFC3/IR exposures: F105W, F125W, F140W, and F160W. We will use

Synthesis and application of photolithographically patternable deep blue emitting poly(3,6-dimethoxy-9,9-dialkylsilafluorene)s.

Science.gov (United States)

McDowell, Jeffrey J; Maier-Flaig, Florian; Wolf, Thomas J A; Unterreiner, Andreas-Neil; Lemmer, Uli; Ozin, Geoffrey

2014-01-08

Poly(silafluorene)s (PSFs) are promising light-emitting materials with brilliant solid-state blue luminescence, high quantum efficiency, excellent solubility, and improved thermal and chemical stability. PSFs are reported to have high electron affinity and conductivity originating from σ*-π* conjugation between the σ*-antibonding orbital of the exocyclic Si-C bond and the π* antibonding orbital of the butadiene fragment, a promising characteristic for improved charge carrier balance in OLEDs. In this paper, we present a protocol for photopatterning derivatives of poly(3,6-dimethoxy-9,9-dialkylsilafluorenes) with resolutions exceeding 10 μm. The procedure begins by converting polymers (Mn = 50-55 kg/mol, PDI = 1.8) with cyclohexenyl and norbornenyl containing side chains to their respective epoxides using the Prilezhaev reaction and m-chloroperoxybenzoic acid (m-CPBA). Using the I-line (365 nm) of a Karl Suss MA6 mask aligner, a 1 s UV light exposure of the photoacid generator (PAG) bis(4-tert-butylphenyl)iodonium hexafluoro-phosphate (DtBPI-PF6) generates sufficient protons to catalyze epoxide ring-opening and form a bridging network of covalent C-O bonds which renders the material insoluble in developing solvents such as toluene or THF. The resultant cross-linked material possess characteristic blue photoluminescence with solid state quantum yields >80%. Polymer films have excellent transparency (with a measured Eg ≈ 3.0 eV). Energy levels determined using cyclic voltammetry were -5.7 and -2.7 eV for HOMO and LUMO, respectively. Additionally, several device applications are demonstrated which incorporate cross-linked films. These include examples of solid state lasing in the region of 420-450 nm from cross-linked films on second order corrugated silica substrates (Λ = 200 nm). OLEDs were also prepared with a cross-linked emitting layer as part of a trilayer device which we report to have a maximum external quantum efficiency of 3.2% at 33 mA/cm(2) and a

Journal of Computational Electronics: Proceedings of the International Workshop on Computational Electronics (8th) (IWCE-8), Beckman Institute, University of Illinois, 15-18 October 2001. Volume 1, Issue 1-2

Science.gov (United States)

2002-01-01

Investigaci6n 48 Oriols through project BFM2000-0353 and by a grant of the Landauer R. 1989. Physica D. 38: 226. Pr cqramna cientifico dle la OTAN...that in the AlSb/InAs and the InAs/GaSb confining inter- will not be dealt with in this article . Our treatment does faces. When the electrons move in the...journals. with the articles . PROCESS FOR SUBMISSION 3. Provide a separate double-spaced sheet listing all footnotes, beginning with "Affiliation of author

Vykazování webových stránek dle IFRS

OpenAIRE

Hort, Jan

2014-01-01

The aim of the thesis is to analyze reporting of websites under IFRS. The text focuses on the reporting requirements according to fact how a website was acquired and what its purpose. Three variants are discussed: self-creation of a website, sale and purchase of a website and also leasing a website. The practical part examines the reporting of intangible assets (especially software) in financial statements of four selected companies. It also provides a brief comparison of reporting of intangi...

Avaliação do efeito fisiológico da farinha de semente de abóbora (Cucurbita maxima, L. no trato intestinal de ratos Evaluation of the pumpkin (Cucurbita maxima, L. seed flour effects on the intestinal tract of rats

Directory of Open Access Journals (Sweden)

Matilde Pumar

2008-12-01

Full Text Available O presente trabalho teve por objetivo avaliar o efeito fisiológico da Farinha de Semente de Abóbora (FSA no trato intestinal de ratos Wistar machos recém desmamados, submetidos a dietas experimentais contendo Farinhas de Semente de Abóbora (FSAs integral, peneirada e residual, por 10 dias. As dietas experimentais foram obtidas substituindo-se 30% do valor total de amido e dextrina, da ração controle, pela FSA correspondente. As farinhas e rações controle e experimentais foram caracterizadas quimicamente. Os animais divididos em grupos foram avaliados quanto ao crescimento, consumo, material fecal e pH cecal. As FSAs e rações experimentais apresentaram relevantes teores de fibras alimentares, proteínas e lipídios. Dietas contendo FSAs integral, peneirada e residual levaram a um ganho ponderal e ingestão similar entre todos os grupos. Em relação ao grupo controle, os animais experimentais submetidos a dietas contendo FSAs apresentaram maior volume e peso fecais (p This study has the aim to evaluate the physiological effects of the Pumpkin Seed Flour (PSF on the intestinal tract of newly weaned male Wistar rats fed on diets containing whole Sifted and Residual - PSF for ten days. The experimental diets were prepared substituting 30% of the total content of starch and dextrin of the control diet for the corresponding PSF. The control and the experimental diets were chemically characterized. The animals were divided into four groups in order to evaluate growth, ingestion, feces, and cecal pH. The PSFs and the experimental diets presented high contents of alimentary fibers, proteins, and lipids. Similar ingestions of diets containing whole Sifted and Residual - PSF resulted in body weight gain. Rats on diets containing PSFs showed higher feces volume and weight (p > 0.05 in addition to an expressive insoluble fiber excretion, especially in the Residual - PSF group. Only the Residual PSF presented a significant reduction (p < 0.05 in the

Multi-Locality Based Local and Symbiotic Computing for Interactively fast On-Demand Weather Forecasting for Small Regions, Short Durations, and Very High-Resolutions

OpenAIRE

Fjukstad, Bård

2014-01-01

Papers 1, 3 and 4 are not available in Munin: 1: Bård Fjukstad, Tor-Magne Stien Hagen, Daniel Stødle, Phuong Hoai Ha, John Markus Bjørndalen, and Otto Anshus: ‘Interactive Weather Simulation and Visualization on a Display Wall with Many-Core Compute Nodes’, in K. Jónasson (ed.): PARA 2010, Part I, LNCS 7133, pp. 142–151, 2012, © Springer-Verlag Berlin Heidelberg 3: Bård Fjukstad, John Markus Bjørndalen and Otto Anshus: ‘Accurate Weather Forecasting Through Locality Based Collaborative Computi...

Hadrontherapy: the ENLIGHT network

CERN Multimedia

Ballantine, A; Dixon-Altaber, H; Dosanjh, M; Greco, V

2012-01-01

The use of ionizing radiation as a treatment for cancer is nowadays well established, but the traditional radiotherapy, which employs very energetic photons (X-­‐‑rays), has several side effects. Some dose is deposited in healthy tissues so that the toxicity of the treatment is quite high. Hadrontherapy is a new generation of radiotherapy, based on the use of charged particles (protons and ions), which can penetrate the tissue with liDle diffusion and deposit the maximum energy in a defined small area, so that important orgasn and healthy tissues can\

A shortened version of the THERP/Handbook approach to human reliability analysis for probabilistic risk assessment

International Nuclear Information System (INIS)

Swain, A.D.

1986-01-01

The approach to human reliability analysis (HRA) known as THERP/Handbook has been applied to several probabilistic risk assessments (PRAs) of nuclear power plants (NPPs) and other complex systems. The approach is based on a thorough task analysis of the man-machine interfaces, including the interactions among the people, involved in the operations being assessed. The idea is to assess fully the underlying performance shaping factors (PSFs) and dependence effects which result either in reliable or unreliable human performance

Performance evaluation of extended depth of field microscopy in the presence of spherical aberration and noise

Science.gov (United States)

King, Sharon V.; Yuan, Shuai; Preza, Chrysanthe

2018-03-01

Effectiveness of extended depth of field microscopy (EDFM) implementation with wavefront encoding methods is reduced by depth-induced spherical aberration (SA) due to reliance of this approach on a defined point spread function (PSF). Evaluation of the engineered PSF's robustness to SA, when a specific phase mask design is used, is presented in terms of the final restored image quality. Synthetic intermediate images were generated using selected generalized cubic and cubic phase mask designs. Experimental intermediate images were acquired using the same phase mask designs projected from a liquid crystal spatial light modulator. Intermediate images were restored using the penalized space-invariant expectation maximization and the regularized linear least squares algorithms. In the presence of depth-induced SA, systems characterized by radially symmetric PSFs, coupled with model-based computational methods, achieve microscope imaging performance with fewer deviations in structural fidelity (e.g., artifacts) in simulation and experiment and 50% more accurate positioning of 1-μm beads at 10-μm depth in simulation than those with radially asymmetric PSFs. Despite a drop in the signal-to-noise ratio after processing, EDFM is shown to achieve the conventional resolution limit when a model-based reconstruction algorithm with appropriate regularization is used. These trends are also found in images of fixed fluorescently labeled brine shrimp, not adjacent to the coverslip, and fluorescently labeled mitochondria in live cells.

IMAGE ANALYSIS FOR COSMOLOGY: RESULTS FROM THE GREAT10 STAR CHALLENGE

International Nuclear Information System (INIS)

Kitching, T. D.; Heymans, C.; Rowe, B.; Witherick, D.; Gill, M.; Massey, R.; Courbin, F.; Gentile, M.; Meylan, G.; Georgatzis, K.; Gruen, D.; Kilbinger, M.; Li, G. L.; Mariglis, A. P.; Storkey, A.; Xin, B.

2013-01-01

We present the results from the first public blind point-spread function (PSF) reconstruction challenge, the GRavitational lEnsing Accuracy Testing 2010 (GREAT10) Star Challenge. Reconstruction of a spatially varying PSF, sparsely sampled by stars, at non-star positions is a critical part in the image analysis for weak lensing where inaccuracies in the modeled ellipticity e and size R 2 can impact the ability to measure the shapes of galaxies. This is of importance because weak lensing is a particularly sensitive probe of dark energy and can be used to map the mass distribution of large scale structure. Participants in the challenge were presented with 27,500 stars over 1300 images subdivided into 26 sets, where in each set a category change was made in the type or spatial variation of the PSF. Thirty submissions were made by nine teams. The best methods reconstructed the PSF with an accuracy of σ(e) ≈ 2.5 × 10 –4 and σ(R 2 )/R 2 ≈ 7.4 × 10 –4 . For a fixed pixel scale, narrower PSFs were found to be more difficult to model than larger PSFs, and the PSF reconstruction was severely degraded with the inclusion of an atmospheric turbulence model (although this result is likely to be a strong function of the amplitude of the turbulence power spectrum).

Herpes Murine Model as a Biological Assay to Test Dialyzable Leukocyte Extracts Activity

Directory of Open Access Journals (Sweden)

Nohemí Salinas-Jazmín

2015-01-01

Full Text Available Human dialyzable leukocyte extracts (DLEs are heterogeneous mixtures of low-molecular-weight peptides that are released on disruption of peripheral blood leukocytes from healthy donors. DLEs improve clinical responses in infections, allergies, cancer, and immunodeficiencies. Transferon is a human DLE that has been registered as a hemoderivate by Mexican health authorities and commercialized nationally. To develop an animal model that could be used routinely as a quality control assay for Transferon, we standardized and validated a murine model of cutaneous HSV-1 infection. Using this model, we evaluated the activity of 27 Transferon batches. All batches improved the survival of HSV-1-infected mice, wherein average survival rose from 20.9% in control mice to 59.6% in Transferon-treated mice. The activity of Transferon correlated with increased serum levels of IFN-γ and reduced IL-6 and TNF-α concentrations. Our results demonstrate that (i this mouse model of cutaneous herpes can be used to examine the activity of DLEs, such as Transferon; (ii the assay can be used as a routine test for batch release; (iii Transferon is produced with high homogeneity between batches; (iv Transferon does not have direct virucidal, cytoprotective, or antireplicative effects; and (v the protective effect of Transferon in vivo correlates with changes in serum cytokines.

Histopathology of murine toxoplasmosis under treatment with dialyzable leukocyte extract

Directory of Open Access Journals (Sweden)

Beatriz Eugenia Fuentes-Castro

Full Text Available BACKGROUND Dialyzable leukocyte extracts (DLEs contain molecules smaller than 10 kDa with biological activity in receptor organisms. Primarily, they participate in the regulation of the Th1 immune response, which is essential for the control of several intracellular infections, such as toxoplasmosis. This disease is associated with congenital infection, encephalitis or systemic infections in immunocompromised individuals. The clinical course of this infection fundamentally depends on a well-regulated immune response and timely treatment with the appropriate drugs. OBJECTIVE The aim of this study was to evaluate the effect of treatment with a leukocyte extract, derived from crocodile lymphoid tissue, on the histopathology and brain parasite load in NIH mice that had been infected with cysts of Toxoplasma gondii (ME-49 strain. METHODS The treatment was applied during the acute and chronic stages of the infection. Histopathological changes were evaluated in the ileum, liver and spleen at one, four and eight weeks after infection and in the brain at week 8. The parasite load was evaluated by counting the cysts of T. gondii found in the brain. FINDINGS Compared to the control mouse group, the mice infected with T. gondii and under treatment with DLE showed less tissue damage, mainly at the intestinal, splenic and hepatic levels. In addition, a greater percentage of survival was observed, and there was a considerable reduction in the parasite load in the brain. CONCLUSIONS The results suggest that DLE derived from crocodile is a potential adjunctive therapy in the conventional treatment of toxoplasmosis.

Contribution of mortality and disability to the secular trend in health inequality at the turn of century in Belgium.

Science.gov (United States)

Van Oyen, Herman; Charafeddine, Rana; Deboosere, Patrick; Cox, Bianca; Lorant, Vincent; Nusselder, Wilma; Demarest, Stefaan

2011-12-01

There is evidence that health inequalities by socio-economic status have persisted. We examined whether educational differences in Disability-Free Life Expectancy (DFLE) and Disability Life Expectancy (DLE) at age 25 has narrowed or widened between the 1990s and 2000s in Belgium. The contribution of mortality and disability prevalence to the secular trend is investigated. We used disability data from the 1997 and 2004 Belgian Health Interviews Surveys and mortality data from the 3-years follow-up of the 1991 and 2001 census population to assess education-related disparities in DFLE and DLE and to partition these differences into additive contributions of mortality and disability. Compared to the highest educated population, differences in the prevalence of disability accounted for at least 66% of the inequality in DFLE. In the latest period, the differences in DFLE compared to men with tertiary education was 4.8, 6.6, 9.7 and 18.6 years for men with, respectively higher secondary, lower secondary, primary and no education. Among females, inequalities in DFLE were, respectively 5.8, 5.1, 10.8 and 18.2 years. There was no evidence that the educational differences in DFLE narrowed since the 1990s. Compared to people with the highest educational attainment, the inequalities in DFLE increased over time for all educational groups except for men with primary education. The social divide in health increased over time: people with the highest education continued to live even longer, they continued to live even longer without disability and to live less years with disability.

Determination of the standards of the thermo-physiological tolerance for working in basic nuclear installation in TIVA protective clothing

International Nuclear Information System (INIS)

Casanova, P.; Daret, J.L.; Besnard, Y.; Clerc, N.; Savourey, G.; Launay, J.C.

2011-01-01

The purpose of this study was to determine the duration limited exposure (DLE) for working in a contaminated zone in a basic nuclear installation using the new ventilated TIVA protective clothing. Five subjects underwent a treadmill exercise (3.5 km/h, 3% of slope) of up to 2 h in a climatic chamber at 25, 35, and 45 deg. C. Cardiac frequency, rectal temperature and skin temperature were continuously recorded. The dehydration level was measured by the loss of weight during the exercise. At 25 deg. C, thermal and cardiovascular thresholds are not reached; the risk is dehydration if the exercise is prolonged. In contrast, the thresholds for Tre at 39 deg. C (97 ± 29 and 69 ± 28 min for 35 and 45 deg. C, respectively) and for the increase in Tre (+1.5 deg. C) are reached earlier (84 ± 38 min and 57 ± 21 min at 35 and 45 deg. C, respectively). This leads to a higher heat storage (42.2 ± 22.9 W/m 2 and 63.7 ± 29.4 W/m 2 , at 35 and 45 deg. C, respectively), which constitutes a higher risk of heat illnesses. The dehydration level is 2% of the weight for the tests at 35 and 45 deg. C. As a consequence, DLE for working in a contaminated zone in a basic nuclear installation in environmental conditions and using the new ventilated TIVA protective clothing, as encountered in our experiments, are proposed to avoid hyperthermic accidents. (authors)

Defect free C-axis oriented zinc oxide (ZnO) films grown at room temperature using RF magnetron sputtering

International Nuclear Information System (INIS)

Kunj, Saurabh; Sreenivas, K.

2016-01-01

Radio frequency Magnetron sputtering technique was employed to fabricate ZnO thin films on quartz substrate at room temperature. The effect of varying oxygen to argon (O_2/Ar) gas ratio on the structural and photoluminescence properties of the film is analyzed.X-ray diffraction (XRD) spectra reveals the formation of hexagonal wurtzite structured ZnO thin films with preferred orientation along (002) plane. Photoluminescence (PL) characterization reveals the preparation of highly crystalline films exhibiting intense Ultraviolet (UV) emission with negligible amount of defects as indicated by the absence of Deep Level Emission (DLE) in the PL spectra.

Defect free C-axis oriented zinc oxide (ZnO) films grown at room temperature using RF magnetron sputtering

Science.gov (United States)

Kunj, Saurabh; Sreenivas, K.

2016-05-01

Radio frequency Magnetron sputtering technique was employed to fabricate ZnO thin films on quartz substrate at room temperature. The effect of varying oxygen to argon (O2/Ar) gas ratio on the structural and photoluminescence properties of the film is analyzed.X-ray diffraction (XRD) spectra reveals the formation of hexagonal wurtzite structured ZnO thin films with preferred orientation along (002) plane. Photoluminescence (PL) characterization reveals the preparation of highly crystalline films exhibiting intense Ultraviolet (UV) emission with negligible amount of defects as indicated by the absence of Deep Level Emission (DLE) in the PL spectra.

Defect free C-axis oriented zinc oxide (ZnO) films grown at room temperature using RF magnetron sputtering

Energy Technology Data Exchange (ETDEWEB)

Kunj, Saurabh, E-mail: saurabhkunj22@gmail.com; Sreenivas, K. [Department of Physics & Astrophysics, University of Delhi, Delhi-110007 (India)

2016-05-23

Radio frequency Magnetron sputtering technique was employed to fabricate ZnO thin films on quartz substrate at room temperature. The effect of varying oxygen to argon (O{sub 2}/Ar) gas ratio on the structural and photoluminescence properties of the film is analyzed.X-ray diffraction (XRD) spectra reveals the formation of hexagonal wurtzite structured ZnO thin films with preferred orientation along (002) plane. Photoluminescence (PL) characterization reveals the preparation of highly crystalline films exhibiting intense Ultraviolet (UV) emission with negligible amount of defects as indicated by the absence of Deep Level Emission (DLE) in the PL spectra.

Rational Unified Process jako metodika vývoje softwaru

OpenAIRE

Rytíř, Vladimír

2008-01-01

Cílem této práce je seznámit se s procesem vývoje softwaru dle vybraných metodik s hlavním zaměřením na metodiku Rational Unified Process od firmy IBM. Incepční a elaborační fáze této metody také aplikuji na praktickém  příkladě. Goal of my work is to introduce software development process metods specialized to Rational Unified Process metod from IBM. I aplicate inception and elaboration phases of RUP on practical example. B

Creation of an anti-imaging system using binary optics

Science.gov (United States)

Wang, Haifeng; Lin, Jian; Zhang, Dawei; Wang, Yang; Gu, Min; Urbach, H. P.; Gan, Fuxi; Zhuang, Songlin

2016-01-01

We present a concealing method in which an anti-point spread function (APSF) is generated using binary optics, which produces a large-scale dark area in the focal region that can hide any object located within it. This result is achieved by generating two identical PSFs of opposite signs, one consisting of positive electromagnetic waves from the zero-phase region of the binary optical element and the other consisting of negative electromagnetic waves from the pi-phase region of the binary optical element. PMID:27620068

IMAGE ANALYSIS FOR COSMOLOGY: RESULTS FROM THE GREAT10 STAR CHALLENGE

Energy Technology Data Exchange (ETDEWEB)

Kitching, T. D.; Heymans, C. [Mullard Space Science Laboratory, University College London, Holmbury St. Mary, Dorking, Surrey RH5 6NT (United Kingdom); Rowe, B.; Witherick, D. [Department of Physics and Astronomy, University College London, Gower Street, London WC1E 6BT (United Kingdom); Gill, M. [Center for Cosmology and AstroParticle Physics, Physics Department, The Ohio State University, Columbus, OH (United States); Massey, R. [Institute for Computational Cosmology, Durham University, South Road, Durham DH1 3LE (United Kingdom); Courbin, F.; Gentile, M.; Meylan, G. [Laboratoire d' Astrophysique, Ecole Polytechnique Federale de Lausanne (EPFL) (Switzerland); Georgatzis, K. [Department of Information and Computer Science, Aalto University, P.O. Box 15400, FI-00076 Aalto (Finland); Gruen, D. [Department of Physics and Astronomy, 209 South 33rd Street, University of Pennsylvania, Philadelphia, PA 19104 (United States); Kilbinger, M. [Excellence Cluster Universe, Boltzmannstr. 2, D-85748 Garching (Germany); Li, G. L. [Purple Mountain Observatory, 2 West Beijing Road, Nanjing 210008 (China); Mariglis, A. P.; Storkey, A. [School of Informatics, University of Edinburgh, 10 Crichton Street, Edinburgh EH8 9AB (United Kingdom); Xin, B., E-mail: t.kitching@ucl.ac.uk [Department of Physics, Purdue University, 525 Northwestern Avenue, West Lafayette, IN 47907 (United States)

2013-04-01

We present the results from the first public blind point-spread function (PSF) reconstruction challenge, the GRavitational lEnsing Accuracy Testing 2010 (GREAT10) Star Challenge. Reconstruction of a spatially varying PSF, sparsely sampled by stars, at non-star positions is a critical part in the image analysis for weak lensing where inaccuracies in the modeled ellipticity e and size R {sup 2} can impact the ability to measure the shapes of galaxies. This is of importance because weak lensing is a particularly sensitive probe of dark energy and can be used to map the mass distribution of large scale structure. Participants in the challenge were presented with 27,500 stars over 1300 images subdivided into 26 sets, where in each set a category change was made in the type or spatial variation of the PSF. Thirty submissions were made by nine teams. The best methods reconstructed the PSF with an accuracy of {sigma}(e) Almost-Equal-To 2.5 Multiplication-Sign 10{sup -4} and {sigma}(R {sup 2})/R {sup 2} Almost-Equal-To 7.4 Multiplication-Sign 10{sup -4}. For a fixed pixel scale, narrower PSFs were found to be more difficult to model than larger PSFs, and the PSF reconstruction was severely degraded with the inclusion of an atmospheric turbulence model (although this result is likely to be a strong function of the amplitude of the turbulence power spectrum).

Lane fuzzy collision in channel with potential deformation by photon-phonon-electron excitation and sub-atomic control

International Nuclear Information System (INIS)

Shen Jing

1998-01-01

Collision between μ + and the μ - beams in the crystal are forbidden due to the two beams having different ''lanes'' in a channel. A laser pulse of ps-fs shocks lattice kernel vibration and dilates lattice electron distribution. It deforms the Lindhard's potential which is then expressed in a quantized form as the Huang-Zhu's potential[1]. The dynamic lanes can be made to overlap in a channel to allow collision without ductile fracture. This raises a new technology of sub-atomic information and control, which has been raised by T. D. Lee

Projections onto Convex Sets Super-Resolution Reconstruction Based on Point Spread Function Estimation of Low-Resolution Remote Sensing Images

Directory of Open Access Journals (Sweden)

Chong Fan

2017-02-01

Full Text Available To solve the problem on inaccuracy when estimating the point spread function (PSF of the ideal original image in traditional projection onto convex set (POCS super-resolution (SR reconstruction, this paper presents an improved POCS SR algorithm based on PSF estimation of low-resolution (LR remote sensing images. The proposed algorithm can improve the spatial resolution of the image and benefit agricultural crop visual interpolation. The PSF of the highresolution (HR image is unknown in reality. Therefore, analysis of the relationship between the PSF of the HR image and the PSF of the LR image is important to estimate the PSF of the HR image by using multiple LR images. In this study, the linear relationship between the PSFs of the HR and LR images can be proven. In addition, the novel slant knife-edge method is employed, which can improve the accuracy of the PSF estimation of LR images. Finally, the proposed method is applied to reconstruct airborne digital sensor 40 (ADS40 three-line array images and the overlapped areas of two adjacent GF-2 images by embedding the estimated PSF of the HR image to the original POCS SR algorithm. Experimental results show that the proposed method yields higher quality of reconstructed images than that produced by the blind SR method and the bicubic interpolation method.

Preparation, characterization and optoelectronic properties of nanodiamonds doped zinc oxide nanomaterials by a ball milling technique

Science.gov (United States)

Ullah, Hameed; Sohail, Muhammad; Malik, Uzma; Ali, Naveed; Bangash, Masroor Ahmad; Nawaz, Mohsan

2016-07-01

Zinc oxide (ZnO) is one of the very important metal oxides (MOs) for applications in optoelectronic devices which work in the blue and UV regions. However, to meet the challenges of obtaining ZnO nanomaterials suitable for practical applications, various modifications in physico-chemical properties are highly desirable. One of the ways adopted for altering the properties is to synthesize composite(s) of ZnO with various reinforcements. Here we report on the tuning of optoelectronic properties of ZnO upon doping by nanodiamonds (NDs) using the ball milling technique. A varying weight percent (wt.%) of NDs were ball milled for 2 h with ZnO nanoparticles prepared by a simple precipitation method. The effects of different parameters, the calcination temperature of ZnO, wt.% of NDs and mechanical milling upon the optoelectronic properties of the resulting ZnO-NDs nanocomposites have been investigated. The ZnO-NDs nanocomposites were characterized by IR spectroscopy, powder x-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy (EDX). The UV-vis spectroscopy revealed the alteration in the bandgap energy (Eg ) of ZnO as a function of the calcination temperature of ZnO, changing the concentration of NDs, and mechanical milling of the resulting nanocomposites. The photoluminescence (PL) spectroscopy showed a decrease in the deep level emission (DLE) peaks and an increase in near-band-edge transition peaks as a result of the increasing concentration of NDs. The decrease in DLE and increase in band to band transition peaks were due to the strong interaction between the NDs and the Zn+; consequently, the Zn+ concentration decreased on the interstitial sites.

Large area UV light source with a semiconductor cathode

International Nuclear Information System (INIS)

Salamov, B. G.; Ciftci, Y. Oe.; Colakoglu, K.

2002-01-01

The light emission (LE) in the UV and visible (blue) range generated by a planar gas discharge system (PGDS) with a semiconductor cathode (SC) are studied. New light source offer high-intensity narrow-band emission at various UV and visible wavelengths (330 - 440 nm). Spectra in N 2 is presented, as well as intensity vs pressure curves for the main peaks of the spectrum. The use of source offers several advantages: PGDS can be extremely efficient energy converters transforming and amplifying a relatively low-powered photon flux incident on the receiving surface of the SC into a flux of high-energy particles over extended areas, i.e. electron, ions, photons. Thus, extremely bright UV and visible sources can be built. LE characteristics of the space in the PGDS are complex, depending on the emitting medium and species. By using the IR light to excite the SC of the system, we have shown that the discharge light emission (DLE) of the device with the N 2 in the gap can serve as an efficient source of the UV radiation if gas pressure and electric field are sufficiently high. This is realized due to the effect of the stabilisation of the spatially homogeneous mode of the discharge in a narrow gap with a large emitting area of SC. Special features of DLE render it highly promising for the development of sources with a large area of the emitting surface, high spatial uniformity of UV radiation, and fast dynamics of these devices. This low cost, high power light sources can provide an interesting alternative to conventional UV lamps

The status of MUSIC: the multiwavelength sub-millimeter inductance camera

Science.gov (United States)

Sayers, Jack; Bockstiegel, Clint; Brugger, Spencer; Czakon, Nicole G.; Day, Peter K.; Downes, Thomas P.; Duan, Ran P.; Gao, Jiansong; Gill, Amandeep K.; Glenn, Jason; Golwala, Sunil R.; Hollister, Matthew I.; Lam, Albert; LeDuc, Henry G.; Maloney, Philip R.; Mazin, Benjamin A.; McHugh, Sean G.; Miller, David A.; Mroczkowski, Anthony K.; Noroozian, Omid; Nguyen, Hien Trong; Schlaerth, James A.; Siegel, Seth R.; Vayonakis, Anastasios; Wilson, Philip R.; Zmuidzinas, Jonas

2014-08-01

The Multiwavelength Sub/millimeter Inductance Camera (MUSIC) is a four-band photometric imaging camera operating from the Caltech Submillimeter Observatory (CSO). MUSIC is designed to utilize 2304 microwave kinetic inductance detectors (MKIDs), with 576 MKIDs for each observing band centered on 150, 230, 290, and 350 GHz. MUSIC's field of view (FOV) is 14' square, and the point-spread functions (PSFs) in the four observing bands have 45'', 31'', 25'', and 22'' full-widths at half maximum (FWHM). The camera was installed in April 2012 with 25% of its nominal detector count in each band, and has subsequently completed three short sets of engineering observations and one longer duration set of early science observations. Recent results from on-sky characterization of the instrument during these observing runs are presented, including achieved map- based sensitivities from deep integrations, along with results from lab-based measurements made during the same period. In addition, recent upgrades to MUSIC, which are expected to significantly improve the sensitivity of the camera, are described.

Protocolos molecular y celular para elaborar y determinar una cepa vacunal de salmonella enterica serotipo enteriditis 82139 y propuesta de tipos de biorreactores para su produccion

OpenAIRE

Villanueva Alva, Liliana Verónica

2016-01-01

Se presenta Protocolos Molecular y Celular para Elaborar y Determinar una cepa vacunal de Salmonella entérica Serotipo Enteritidis 82139 y Propuesta de Tipos de Biorreactores para su Producción. El Diseño Factorial permitió en un inicio los diseños y selección para la construcción de cepas mutantes hasta la validación estadística en la determinación de la función génica de dsbA, dle y dlp con respecto a la capacidad de movilidad y de invasión intracelular bacteriana a partir de la determinaci...

Human Factors Engineering. Student Supplement,

Science.gov (United States)

1981-08-01

123.0 154.2 154.8 143.7 4 CHEST ( NIPPLE ) HEIGHT* 117.9 120.8 109.3 136.5 138.5 1273 5 ELBOW (RADIALE) HEIGHT 101.0 104.8 94. 117.3 120.0 110.7 6...HEIGHT 52.6 52.5 4B.4 60.7 60.9 56.6 4 CHEST ( NIPPLE ) HEIGHT * 464 47.5 430 53.7 54.5 50.3 5 ELBOW IRADIALE) HEIGHT 39.3 41.3 37A 464 47.2 43. 6...Escape Movtes NM W a DIMMIIS clearnes" Force Require- Deen/Usch Men - luesgNIcy ilt Comtri/Oiiplay got~ ad dle Attuntion RealuWaes Ratio Torque Sauces

dle-class is the lack /audience eception/ or to the cultures ed in the ...

African Journals Online (AJOL)

2006-01-27

Jan 27, 2006 ... tion and artistic expression, gender issues, the politics of ... tant issues regarding biased perceptions of the “feminising of ... men in the struggle against apartheid and how freedom ... experience than the stereotypical beads-.

In Vivo Chemoprotective Activity of Bovine Dialyzable Leukocyte Extract in Mouse Bone Marrow Cells against Damage Induced by 5-Fluorouracil

Directory of Open Access Journals (Sweden)

Erika Evangelina Coronado-Cerda

2016-01-01

Full Text Available Chemotherapy treatments induce a number of side effects, such as leukopenia neutropenia, peripheral erythropenia, and thrombocytopenia, affecting the quality of life for cancer patients. 5-Fluorouracil (5-FU is wieldy used as myeloablative model in mice. The bovine dialyzable leukocyte extract (bDLE or IMMUNEPOTENT CRP® (ICRP is an immunomodulatory compound that has antioxidants and anti-inflammatory effects. In order to investigate the chemoprotection effect of ICRP on bone marrow cells in 5-FU treated mice, total bone marrow (BM cell count, bone marrow colony forming units-granulocyte/macrophage (CFU-GM, cell cycle, immunophenotypification, ROS/superoxide and Nrf2 by flow cytometry, and histological and hematological analyses were performed. Our results demonstrated that ICRP increased BM cell count and CFU-GM number, arrested BM cells in G0/G1 phase, increased the percentage of leukocyte, granulocytic, and erythroid populations, reduced ROS/superoxide formation and Nrf2 activation, and also improved hematological levels and weight gain in 5-FU treated mice. These results suggest that ICRP has a chemoprotective effect against 5-FU in BM cells that can be used in cancer patients.

In Vivo Chemoprotective Activity of Bovine Dialyzable Leukocyte Extract in Mouse Bone Marrow Cells against Damage Induced by 5-Fluorouracil

Science.gov (United States)

Coronado-Cerda, Erika Evangelina; Franco-Molina, Moisés Armides; Mendoza-Gamboa, Edgar; Prado-García, Heriberto; Rivera-Morales, Lydia Guadalupe; Zapata-Benavides, Pablo; Rodríguez-Salazar, María del Carmen; Caballero-Hernandez, Diana; Tamez-Guerra, Reyes Silvestre; Rodríguez-Padilla, Cristina

2016-01-01

Chemotherapy treatments induce a number of side effects, such as leukopenia neutropenia, peripheral erythropenia, and thrombocytopenia, affecting the quality of life for cancer patients. 5-Fluorouracil (5-FU) is wieldy used as myeloablative model in mice. The bovine dialyzable leukocyte extract (bDLE) or IMMUNEPOTENT CRP® (ICRP) is an immunomodulatory compound that has antioxidants and anti-inflammatory effects. In order to investigate the chemoprotection effect of ICRP on bone marrow cells in 5-FU treated mice, total bone marrow (BM) cell count, bone marrow colony forming units-granulocyte/macrophage (CFU-GM), cell cycle, immunophenotypification, ROS/superoxide and Nrf2 by flow cytometry, and histological and hematological analyses were performed. Our results demonstrated that ICRP increased BM cell count and CFU-GM number, arrested BM cells in G0/G1 phase, increased the percentage of leukocyte, granulocytic, and erythroid populations, reduced ROS/superoxide formation and Nrf2 activation, and also improved hematological levels and weight gain in 5-FU treated mice. These results suggest that ICRP has a chemoprotective effect against 5-FU in BM cells that can be used in cancer patients. PMID:27191003

CFHTLenS: improving the quality of photometric redshifts with precision photometry

Science.gov (United States)

Hildebrandt, H.; Erben, T.; Kuijken, K.; van Waerbeke, L.; Heymans, C.; Coupon, J.; Benjamin, J.; Bonnett, C.; Fu, L.; Hoekstra, H.; Kitching, T. D.; Mellier, Y.; Miller, L.; Velander, M.; Hudson, M. J.; Rowe, B. T. P.; Schrabback, T.; Semboloni, E.; Benítez, N.

2012-04-01

Here we present the results of various approaches to measure accurate colours and photometric redshifts (photo-z) from wide-field imaging data. We use data from the Canada-France-Hawaii Telescope Legacy Survey which have been re-processed by the Canada-France-Hawaii Telescope Lensing Survey (CFHTLenS) team in order to carry out a number of weak gravitational lensing studies. An emphasis is put on the correction of systematic effects in the photo-z arising from the different point spread functions (PSFs) in the five optical bands. Different ways of correcting these effects are discussed and the resulting photo-z accuracies are quantified by comparing the photo-z to large spectroscopic redshift (spec-z) data sets. Careful homogenization of the PSF between bands leads to increased overall accuracy of photo-z. The gain is particularly pronounced at fainter magnitudes where galaxies are smaller and flux measurements are affected more by PSF effects. We discuss ways of defining more secure subsamples of galaxies as well as a shape- and colour-based star-galaxy separation method, and we present redshift distributions for different magnitude limits. We also study possible re-calibrations of the photometric zero-points (ZPs) with the help of galaxies with known spec-z. We find that if PSF effects are properly taken into account, a re-calibration of the ZPs becomes much less important suggesting that previous such re-calibrations described in the literature could in fact be mostly corrections for PSF effects rather than corrections for real inaccuracies in the ZPs. The implications of this finding for future surveys like the Kilo Degree Survey (KiDS), Dark Energy Survey (DES), Large Synoptic Survey Telescope or Euclid are mixed. On the one hand, ZP re-calibrations with spec-z values might not be as accurate as previously thought. On the other hand, careful PSF homogenization might provide a way out and yield accurate, homogeneous photometry without the need for full

Reducing depth induced spherical aberration in 3D widefield fluorescence microscopy by wavefront coding using the SQUBIC phase mask

Science.gov (United States)

Patwary, Nurmohammed; Doblas, Ana; King, Sharon V.; Preza, Chrysanthe

2014-03-01

Imaging thick biological samples introduces spherical aberration (SA) due to refractive index (RI) mismatch between specimen and imaging lens immersion medium. SA increases with the increase of either depth or RI mismatch. Therefore, it is difficult to find a static compensator for SA1. Different wavefront coding methods2,3 have been studied to find an optimal way of static wavefront correction to reduce depth-induced SA. Inspired by a recent design of a radially symmetric squared cubic (SQUBIC) phase mask that was tested for scanning confocal microscopy1 we have modified the pupil using the SQUBIC mask to engineer the point spread function (PSF) of a wide field fluorescence microscope. In this study, simulated images of a thick test object were generated using a wavefront encoded engineered PSF (WFEPSF) and were restored using space-invariant (SI) and depth-variant (DV) expectation maximization (EM) algorithms implemented in the COSMOS software4. Quantitative comparisons between restorations obtained with both the conventional and WFE PSFs are presented. Simulations show that, in the presence of SA, the use of the SIEM algorithm and a single SQUBIC encoded WFE-PSF can yield adequate image restoration. In addition, in the presence of a large amount of SA, it is possible to get adequate results using the DVEM with fewer DV-PSFs than would typically be required for processing images acquired with a clear circular aperture (CCA) PSF. This result implies that modification of a widefield system with the SQUBIC mask renders the system less sensitive to depth-induced SA and suitable for imaging samples at larger optical depths.

Localization of immunoglobulins and complement by the peroxidase antiperoxidase method in autoimmune and non-autoimmune canine dermatopathies.

Science.gov (United States)

Moore, F M; White, S D; Carpenter, J L; Torchon, E

1987-01-01

Formalin-fixed, paraffin embedded skin biopsy specimens from 44 dogs with various dermatopathies were examined for the presence of immunoglobulins (IgG, IgM, IgA) and complement (C3) by the peroxidase antiperoxidase method (PAP). Final diagnoses of the skin diseases were determined by clinical findings, fungal and bacterial cultures, skin scrapings, serum endocrinologic tests, and histologic features of cutaneous biopsies. The dermatopathies included examples of pyoderma (folliculitis/furunculosis), demodecosis, sarcoptic mange, dermatophytosis, endocrine dermatopathy, and autoimmune skin disease (AISD). In the latter category, 7 cases of pemphigus foliaceus, 1 pemphigus vulgaris, 4 discoid lupus erythematosus (DLE) and 4 examples of indeterminate AISD were examined. Immunoglobulins, C3, or both, were localized in tissue sections from AISD (15/16), pyoderma (7/11), demodecosis (4/8) sarcoptic mange (3/3), and dermatomycosis (2/3). Endocrine dermatopathy biopsies were consistently negative for Ig and C3 (0/3). The pattern of localization was most often intercellular (31/44 positive biopsies) with basement membrane immunoreactivity in 4 cases of DLE, and 1 case of indeterminate AISD. There was no consistent correlation between histologic features of hematoxylin and eosin-stained biopsies and the presence of Ig and C3. Clinical outcome was similar in both Ig and C3 positive and negative cases of non-AISD dermatitis. The high percentage (95%) of positive results in AISD biopsies indicates the usefulness and sensitivity of the PAP method for the localization of Ig and C3. Because of the high percentage of Ig localization in pyoderma (73%), biopsy specimens with extensive inflammatory skin disease are not suitable for diagnosis of AISD. The PAP method is useful in the diagnosis of AISD in biopsy specimens with minimal inflammation. Caution is warranted in the interpretation of immunoreactivity independent of clinical and histologic information.

Fabrication of n-ZnO/ p-Si (100) and n-ZnO:Al/ p-Si (100) Heterostructures and Study of Current-Voltage, Capacitance-Voltage and Room-Temperature Photoluminescence

Science.gov (United States)

Shah, M. A. H.; Khan, M. K. R.; Tanveer Karim, A. M. M.; Rahman, M. M.; Kamruzzaman, M.

2018-01-01

Heterojunction diodes of n-ZnO/ p-Si (100) and n-ZnO:Al/ p-Si (100) were fabricated by spray pyrolysis technique. X-ray diffraction (XRD), energy dispersive x-ray spectroscopy (EDX), and field emission scanning electron microscopy (FESEM) were used to characterize the as-prepared samples. The XRD pattern indicates the hexagonal wurzite structure of zinc oxide (ZnO) and Al-doped ZnO (AZO) thin films grown on Si (100) substrate. The compositional analysis by EDX indicates the presence of Al in the AZO structure. The FESEM image indicates the smooth and compact surface of the heterostructures. The current-voltage characteristics of the heterojunction confirm the rectifying diode behavior at different temperatures and illumination intensities. For low forward bias voltage, the ideality factors were determined to be 1.24 and 1.38 for un-doped and Al-doped heterostructures at room temperature (RT), respectively, which indicates the good diode characteristics. The capacitance-voltage response of the heterojunctions was studied for different oscillation frequencies. From the 1/ C 2- V plot, the junction built-in potentials were found 0.30 V and 0.40 V for un-doped and Al-doped junctions at RT, respectively. The differences in built-in potential for different heterojunctions indicate the different interface state densities of the junctions. From the RT photoluminescence (PL) spectrum of the n-ZnO/ p-Si (100) heterostructure, an intense main peak at near band edge (NBE) 378 nm (3.28 eV) and weak deep-level emissions (DLE) centered at 436 nm (2.84 eV) and 412 nm (3.00 eV) were observed. The NBE emission is attributed to the radiative recombination of the free and bound excitons and the DLE results from the radiative recombination through deep level defects.

Human Ro60 (SSA2) genomic organization and sequence alterations, examined in cutaneous lupus erythematosus.

Science.gov (United States)

Millard, T P; Ashton, G H S; Kondeatis, E; Vaughan, R W; Hughes, G R V; Khamashta, M A; Hawk, J L M; McGregor, J M; McGrath, J A

2002-02-01

The Ro 60 kDa protein (Ro60 or SSA2) is the major component of the Ro ribonucleoprotein (Ro RNP) complex, to which an immune response is a specific feature of several autoimmune diseases. The genomic organization and any sequence variation within the DNA encoding Ro60 are unknown. To characterize the Ro60 gene structure and to assess whether any sequence alterations might be associated with serum anti-Ro antibody in subacute cutaneous lupus erythematosus (SCLE), thus potentially providing new insight into disease pathogenesis. The cDNA sequence for Ro60 was obtained from the NCBI database and used for a BLAST search for a clone containing the entire genomic sequence. The intron-exon borders were confirmed by designing intronic primer pairs to flank each exon, which were then used to amplify genomic DNA for automated sequencing from 36 caucasian patients with SCLE (anti-Ro positive) and 49 with discoid LE (DLE, anti-Ro negative), in addition to 36 healthy caucasian controls. Heteroduplex analysis of polymerase chain reaction (PCR) products from patients and controls spanning all Ro60 exons (1-8) revealed a common bandshift in the PCR products spanning exon 7. Sequencing of the corresponding PCR products demonstrated an A > G substitution at nucleotide position 1318-7, within the consensus acceptor splice site of exon 7 (GenBank XM001901). The allele frequencies were major allele A (0.71) and minor allele G (0.29) in 72 control chromosomes, with no significant differences found between SCLE patients, DLE patients and controls. The genomic organization of the DNA encoding the Ro60 protein is described, including a common polymorphism within the consensus acceptor splice site of exon 7. Our delineation of a strategy for the genomic amplification of Ro60 forms a basis for further examination of the pathological functions of the Ro RNP in autoimmune disease.

Squamous Cell Cancer Arising in an African American Male Cheek from Discoid Lupus: A Rare Case and Review of the Literature

Directory of Open Access Journals (Sweden)

Emanuel A. Shapera

2016-01-01

Full Text Available A 50-year-old African American male with Discoid Lupus Erythematosus (DLE presented to the dermatology clinic for a rapidly enlarging left cheek mass. The mass failed to resolve with conservative measures. A biopsy revealed poorly differentiated Squamous Cell Carcinoma (SCC. He was referred to Head and Neck Surgery and successfully underwent a resection with free flap reconstruction. Postoperatively he did well. Squamous cell skin carcinomas arising from lesions of Discoid Lupus are rare and aggressive tumors with greater likelihood of metastases. Cases have been reported among patients with different clinical characteristics; we present a rare case arising in an African American male on the face and involving the ear.

Výška podélné nožní klenby stanovená metodou Chippaux-Šmiřák u kompenzovaných a nekompenzovaných typů nohy dle Roota The height of the longitudinal foot arch assessed by Chippaux-Šmiřák index in the compensated and uncompensated foot types according to Root

Directory of Open Access Journals (Sweden)

Renata Vařeková

2008-01-01

Full Text Available Je známo, že funkční typy a subtypy nohy dle Roota se liší mimo jiné i výškou nožní klenby při zatížení. Cílem této práce bylo porovnat výšku podélné nožní klenby u funkčních (subtypů nohy dle Roota pomocí Chippaux-Šmiřákova indexu (CSI. Soubor tvořilo 141 žen (17–85 let, x = 58,8, SD = 12 a 87 mužů (22–86 let, x = 58,7, SD = 11,91 převážně středního a vyššího věku. Jeden vyšetřující stanovil u všech probandů funkční typ a subtyp nohy – varozní zánoží kompenzované (RFvarC, částečně kompenzovaná (RFvarP a nekompenzované (RFvarN, varozní předonoží kompenzované (FFvarC, částečně kompenzované (FFvarP a nekompenzované (FFvarN, valgozní předonoží flexibilní (FFvalgF, semiflexibilní (FFvalgS a rigidní (FFvalgR a neutrální typ (N. Druhý vyšetřující zhodnotil všechny plantogramy a stanovil CSI. Na základě průměrné hodnoty CSI bylo stanoveno pořadí a statistická významnost zjištěných rozdílů byla testována pomocí ANOVA a post-hoc Fisherova LSD testu. Výsledky ukázaly, že funkční subtypy lze s vysokou mírou statistické pravděpodobnosti rozdělit do 2 krajních skupin. Na jedné straně spektra leží subtypy s vysokou hodnotu CSI (tedy nižší podélnou klenbou, kompenzované, resp. flexibilní subtypy. Na opačné pravé straně spektra leží nekompenzované, resp. rigidní subtypy s nízkou hodnotou CSI. Ve střední části spektra leží přechodné subtypy. Neutrální funkční typ lze zařadit do střední skupiny, spíše k levé straně. Vliv pohlaví je zanedbatelný. Výsledky tak potvrdily předpoklad o rozdílech mezi funkčními (subtypy ve výšce podélné nožní klenby při zatížení. Stanovení výšky podélné klenby nohy pomocí plantogramu může pomoci při odhadu stupně kompenzace či flexibility jednotlivých funkčních typů. Samo o sobě však nemůže nahradit vlastní aspekci a fyzikální vy

Science Based Human Reliability Analysis: Using Digital Nuclear Power Plant Simulators for Human Reliability Research

Science.gov (United States)

Shirley, Rachel Elizabeth

Nuclear power plant (NPP) simulators are proliferating in academic research institutions and national laboratories in response to the availability of affordable, digital simulator platforms. Accompanying the new research facilities is a renewed interest in using data collected in NPP simulators for Human Reliability Analysis (HRA) research. An experiment conducted in The Ohio State University (OSU) NPP Simulator Facility develops data collection methods and analytical tools to improve use of simulator data in HRA. In the pilot experiment, student operators respond to design basis accidents in the OSU NPP Simulator Facility. Thirty-three undergraduate and graduate engineering students participated in the research. Following each accident scenario, student operators completed a survey about perceived simulator biases and watched a video of the scenario. During the video, they periodically recorded their perceived strength of significant Performance Shaping Factors (PSFs) such as Stress. This dissertation reviews three aspects of simulator-based research using the data collected in the OSU NPP Simulator Facility: First, a qualitative comparison of student operator performance to computer simulations of expected operator performance generated by the Information Decision Action Crew (IDAC) HRA method. Areas of comparison include procedure steps, timing of operator actions, and PSFs. Second, development of a quantitative model of the simulator bias introduced by the simulator environment. Two types of bias are defined: Environmental Bias and Motivational Bias. This research examines Motivational Bias--that is, the effect of the simulator environment on an operator's motivations, goals, and priorities. A bias causal map is introduced to model motivational bias interactions in the OSU experiment. Data collected in the OSU NPP Simulator Facility are analyzed using Structural Equation Modeling (SEM). Data include crew characteristics, operator surveys, and time to recognize

Solar wind flows associated with hot heavy ions

International Nuclear Information System (INIS)

Fenimore, E.E.

1980-05-01

Solar wind heavy ion spectra measured with the Vela instrumentation have been studied with the goal of determining the solar origins of various solar wind structures which contain anomalously high ionization states. Since the ionization states freeze-in close to the sun they are good indicators of the plasma conditions in the low and intermediate corona. Heavy ion spectra from three different periods throughout the solar cycle have been analyzed. These data are consistent with freezing-in temperatures ranging from approx. 1.5 x 10 6 K to higher than 9 x 10 6 . The spectra indicating hot coronal conditions occur in roughly 1/7 of all measurements and almost exclusively in postshock flows (PSFs), nonshock related helium abundance enhancements (HAEs), or noncompressive density enhancements (NCDEs). The PSFs and HAEs are both probably interplanetary manifestations of solar flares. The observation of several flare-related HAEs which were not preceded by an interplanetary shock suggests that the flare-heated plasma can evolve into the solar wind without producing a noticeable shock at 1 AU. The NCDEs with hot heavy ions differ from the PSF-HAEs in several ways implying that they evolve from events or places with lower temperatures and less energy than those associated with the flares, but with higher temperatures and densities than the quiet corona. Active regions, coronal mass ejections, and equatorial streamers are possible sources for the NCDEs with spectra indicating hot coronal conditions. These events owe their enhanced densities to coronal processes as opposed to interplanetary dynamical processes. Models of the solar wind expansion demonstrate how some NCDEs can have extreme, nonequilibrium ionization distributions

Realistic Simulations of Coronagraphic Observations with WFIRST

Science.gov (United States)

Rizzo, Maxime; Zimmerman, Neil; Roberge, Aki; Lincowski, Andrew; Arney, Giada; Stark, Chris; Jansen, Tiffany; Turnbull, Margaret; WFIRST Science Investigation Team (Turnbull)

2018-01-01

We present a framework to simulate observing scenarios with the WFIRST Coronagraphic Instrument (CGI). The Coronagraph and Rapid Imaging Spectrograph in Python (crispy) is an open-source package that can be used to create CGI data products for analysis and development of post-processing routines. The software convolves time-varying coronagraphic PSFs with realistic astrophysical scenes which contain a planetary architecture, a consistent dust structure, and a background field composed of stars and galaxies. The focal plane can be read out by a WFIRST electron-multiplying CCD model directly, or passed through a WFIRST integral field spectrograph model first. Several elementary post-processing routines are provided as part of the package.

Development of new HRA methods based upon operational experience

International Nuclear Information System (INIS)

Cooper, S.E.; Luckas, W.J.; Barriere, M.T.; Wreathall, J.

2004-01-01

Under the auspices of the US Nuclear Regulatory Commission (NRC), previously unaddressed human reliability issues are being investigated in order to support the development of human reliability analysis (HRA) methods for both low power and shutdown (LP and S) and full-power conditions. Actual operational experience, such as that reported in Licensee Event Reports (LERs), have been used to gain insights and provide a basis for the requirements of new HRA methods. In particular, operational experience has shown that new HRA methods for LP and S must address human-induced initiators, errors of commission, mistakes (vs. slips), dependencies, and the effects of multiple performance shaping factors (PSFs). (author)

Modeling digital breast tomosynthesis imaging systems for optimization studies

Science.gov (United States)

Lau, Beverly Amy

Digital breast tomosynthesis (DBT) is a new imaging modality for breast imaging. In tomosynthesis, multiple images of the compressed breast are acquired at different angles, and the projection view images are reconstructed to yield images of slices through the breast. One of the main problems to be addressed in the development of DBT is the optimal parameter settings to obtain images ideal for detection of cancer. Since it would be unethical to irradiate women multiple times to explore potentially optimum geometries for tomosynthesis, it is ideal to use a computer simulation to generate projection images. Existing tomosynthesis models have modeled scatter and detector without accounting for oblique angles of incidence that tomosynthesis introduces. Moreover, these models frequently use geometry-specific physical factors measured from real systems, which severely limits the robustness of their algorithms for optimization. The goal of this dissertation was to design the framework for a computer simulation of tomosynthesis that would produce images that are sensitive to changes in acquisition parameters, so an optimization study would be feasible. A computer physics simulation of the tomosynthesis system was developed. The x-ray source was modeled as a polychromatic spectrum based on published spectral data, and inverse-square law was applied. Scatter was applied using a convolution method with angle-dependent scatter point spread functions (sPSFs), followed by scaling using an angle-dependent scatter-to-primary ratio (SPR). Monte Carlo simulations were used to generate sPSFs for a 5-cm breast with a 1-cm air gap. Detector effects were included through geometric propagation of the image onto layers of the detector, which were blurred using depth-dependent detector point-spread functions (PRFs). Depth-dependent PRFs were calculated every 5-microns through a 200-micron thick CsI detector using Monte Carlo simulations. Electronic noise was added as Gaussian noise as a

Derivation of main drivers affecting the possibility of human errors during low power and shutdown operation

Energy Technology Data Exchange (ETDEWEB)

Kim, Ar Ryum; Seong, Poong Hyun [KAIST, Daejeon (Korea, Republic of); Park, Jin Kyun; Kim, Jae Whan [KAERI, Daejeon (Korea, Republic of)

2016-05-15

In order to estimate the possibility of human error and identify its nature, human reliability analysis (HRA) methods have been implemented. For this, various HRA methods have been developed so far: techniques for human error rate prediction (THERP), cause based decision tree (CBDT), the cognitive reliability and error analysis method (CREAM) and so on. Most HRA methods have been developed with a focus on full power operation of NPPs even though human performance may more largely affect the safety of the system during low power and shutdown (LPSD) operation than it would when the system is in full power operation. In this regard, it is necessary to conduct a research for developing HRA method to be used in LPSD operation. For the first step of the study, main drivers which affect the possibility of human error have been developed. Drivers which are commonly called as performance shaping factors (PSFs) are aspects of the human's individual characteristics, environment, organization, or task that specifically decrements or improves human performance, thus respectively increasing or decreasing the likelihood of human errors. In order to estimate the possibility of human error and identify its nature, human reliability analysis (HRA) methods have been implemented. For this, various HRA methods have been developed so far: techniques for human error rate prediction (THERP), cause based decision tree (CBDT), the cognitive reliability and error analysis method (CREAM) and so on. Most HRA methods have been developed with a focus on full power operation of NPPs even though human performance may more largely affect the safety of the system during low power and shutdown (LPSD) operation than it would when the system is in full power operation. In this regard, it is necessary to conduct a research for developing HRA method to be used in LPSD operation. For the first step of the study, main drivers which affect the possibility of human error have been developed. Drivers

Derivation of main drivers affecting the possibility of human errors during low power and shutdown operation

International Nuclear Information System (INIS)

Kim, Ar Ryum; Seong, Poong Hyun; Park, Jin Kyun; Kim, Jae Whan

2016-01-01

In order to estimate the possibility of human error and identify its nature, human reliability analysis (HRA) methods have been implemented. For this, various HRA methods have been developed so far: techniques for human error rate prediction (THERP), cause based decision tree (CBDT), the cognitive reliability and error analysis method (CREAM) and so on. Most HRA methods have been developed with a focus on full power operation of NPPs even though human performance may more largely affect the safety of the system during low power and shutdown (LPSD) operation than it would when the system is in full power operation. In this regard, it is necessary to conduct a research for developing HRA method to be used in LPSD operation. For the first step of the study, main drivers which affect the possibility of human error have been developed. Drivers which are commonly called as performance shaping factors (PSFs) are aspects of the human's individual characteristics, environment, organization, or task that specifically decrements or improves human performance, thus respectively increasing or decreasing the likelihood of human errors. In order to estimate the possibility of human error and identify its nature, human reliability analysis (HRA) methods have been implemented. For this, various HRA methods have been developed so far: techniques for human error rate prediction (THERP), cause based decision tree (CBDT), the cognitive reliability and error analysis method (CREAM) and so on. Most HRA methods have been developed with a focus on full power operation of NPPs even though human performance may more largely affect the safety of the system during low power and shutdown (LPSD) operation than it would when the system is in full power operation. In this regard, it is necessary to conduct a research for developing HRA method to be used in LPSD operation. For the first step of the study, main drivers which affect the possibility of human error have been developed. Drivers which

On microscopic theory of radiative nuclear reaction characteristics

Energy Technology Data Exchange (ETDEWEB)

Kamerdzhiev, S. P. [National Research Centre “Kurchatov Institute” (Russian Federation); Achakovskiy, O. I., E-mail: oachakovskiy@ippe.ru; Avdeenkov, A. V. [Institute for Physics and Power Engineering (Russian Federation); Goriely, S. [Institut d’Astronomie et d’Astrophysique (Belgium)

2016-07-15

A survey of some results in the modern microscopic theory of properties of nuclear reactions with gamma rays is given. First of all, we discuss the impact of Phonon Coupling (PC) on the Photon Strength Function (PSF) because it represents the most natural physical source of additional strength found for Sn isotopes in recent experiments that could not be explained within the standard HFB + QRPA approach. The self-consistent version of the Extended Theory of Finite Fermi Systems in the Quasiparticle Time Blocking Approximation is applied. It uses the HFB mean field and includes both the QRPA and PC effects on the basis of the SLy4 Skyrme force. With our microscopic E1 PSFs, the following properties have been calculated for many stable and unstable even–even semi-magic Sn and Ni isotopes as well as for double-magic {sup 132}Sn and {sup 208}Pb using the reaction codes EMPIRE and TALYS with several Nuclear Level Density (NLD) models: (1) the neutron capture cross sections; (2) the corresponding neutron capture gamma spectra; (3) the average radiative widths of neutron resonances. In all the properties considered, the PC contribution turned out to be significant, as compared with the standard QRPA one, and necessary to explain the available experimental data. The results with the phenomenological so-called generalized superfluid NLD model turned out to be worse, on the whole, than those obtained with the microscopic HFB + combinatorial NLD model. The very topical question about the M1 resonance contribution to PSFs is also discussed.Finally, we also discuss the modern microscopic NLD models based on the self-consistent HFB method and show their relevance to explain the experimental data as compared with the phenomenological models. The use of these self-consistent microscopic approaches is of particular relevance for nuclear astrophysics, but also for the study of double-magic nuclei.

Interactively variable isotropic resolution in computed tomography

International Nuclear Information System (INIS)

Lapp, Robert M; Kyriakou, Yiannis; Kachelriess, Marc; Wilharm, Sylvia; Kalender, Willi A

2008-01-01

An individual balancing between spatial resolution and image noise is necessary to fulfil the diagnostic requirements in medical CT imaging. In order to change influencing parameters, such as reconstruction kernel or effective slice thickness, additional raw-data-dependent image reconstructions have to be performed. Therefore, the noise versus resolution trade-off is time consuming and not interactively applicable. Furthermore, isotropic resolution, expressed by an equivalent point spread function (PSF) in every spatial direction, is important for the undistorted visualization and quantitative evaluation of small structures independent of the viewing plane. Theoretically, isotropic resolution can be obtained by matching the in-plane and through-plane resolution with the aforementioned parameters. Practically, however, the user is not assisted in doing so by current reconstruction systems and therefore isotropic resolution is not commonly achieved, in particular not at the desired resolution level. In this paper, an integrated approach is presented for equalizing the in-plane and through-plane spatial resolution by image filtering. The required filter kernels are calculated from previously measured PSFs in x/y- and z-direction. The concepts derived are combined with a variable resolution filtering technique. Both approaches are independent of CT raw data and operate only on reconstructed images which allows for their application in real time. Thereby, the aim of interactively variable, isotropic resolution is achieved. Results were evaluated quantitatively by measuring PSFs and image noise, and qualitatively by comparing the images to direct reconstructions regarded as the gold standard. Filtered images matched direct reconstructions with arbitrary reconstruction kernels with standard deviations in difference images of typically between 1 and 17 HU. Isotropic resolution was achieved within 5% of the selected resolution level. Processing times of 20-100 ms per frame

Task Analysis of Emergency Operating Procedures for Generating Quantitative HRA Data

Energy Technology Data Exchange (ETDEWEB)

Kim, Yochan; Park, Jinkyun; Kim, Seunghwan; Choi, Sun Yeong; Jung, Wondea; Jang, Inseok [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

In this paper, the analysis results of the emergency task in the procedures (EOPs; emergency operating procedures) that can be observed from the simulator data are introduced. The task type, component type, system type, and additional information related with the performance of the operators were described. In addition, a prospective application of the analyzed information to HEP quantification process was discussed. In the probabilistic safety analysis (PSA) field, various human reliability analyses (HRAs) have been performed to produce estimates of human error probabilities (HEPs) for significant tasks in complex socio-technical systems. To this end, Many HRA methods have provided basic or nominal HEPs for typical tasks and the quantitative relations describing how a certain performance context or performance shaping factors (PSFs) affects the HEPs. In the HRA community, however, the necessity of appropriate and sufficient human performance data has been recently indicated. This is because a wide range of quantitative estimates in the previous HRA methods are not supported by solid empirical bases. Hence, there have been attempts to collect HRA supporting data. For example, KAERI has started to collect information on both unsafe acts of operators and the relevant PSFs. A characteristic of the database that is being developed at KAERI is that human errors and related PSF surrogates that can be objectively observable are collected from full-scope simulator experiences. In this environment, to produce concretely grounded bases of the HEPs, the traits or attributes of tasks where significant human errors can be observed should be definitely determined. The determined traits should be applicable to compare the HEPs on the traits with the data in previous HRA methods or databases. In this study, task characteristics in a Westinghouse type of EOPs were analyzed with the defining task, component, and system taxonomies.

A framework to estimate probability of diagnosis error in NPP advanced MCR

International Nuclear Information System (INIS)

Kim, Ar Ryum; Kim, Jong Hyun; Jang, Inseok; Seong, Poong Hyun

2018-01-01

Highlights: •As new type of MCR has been installed in NPPs, the work environment is considerably changed. •A new framework to estimate operators’ diagnosis error probabilities should be proposed. •Diagnosis error data were extracted from the full-scope simulator of the advanced MCR. •Using Bayesian inference, a TRC model was updated for use in advanced MCR. -- Abstract: Recently, a new type of main control room (MCR) has been adopted in nuclear power plants (NPPs). The new MCR, known as the advanced MCR, consists of digitalized human-system interfaces (HSIs), computer-based procedures (CPS), and soft controls while the conventional MCR includes many alarm tiles, analog indicators, hard-wired control devices, and paper-based procedures. These changes significantly affect the generic activities of the MCR operators, in relation to diagnostic activities. The aim of this paper is to suggest a framework to estimate the probabilities of diagnosis errors in the advanced MCR by updating a time reliability correlation (TRC) model. Using Bayesian inference, the TRC model was updated with the probabilities of diagnosis errors. Here, the diagnosis error data were collected from a full-scope simulator of the advanced MCR. To do this, diagnosis errors were determined based on an information processing model and their probabilities were calculated. However, these calculated probabilities of diagnosis errors were largely affected by context factors such as procedures, HSI, training, and others, known as PSFs (Performance Shaping Factors). In order to obtain the nominal diagnosis error probabilities, the weightings of PSFs were also evaluated. Then, with the nominal diagnosis error probabilities, the TRC model was updated. This led to the proposal of a framework to estimate the nominal probabilities of diagnosis errors in the advanced MCR.

Pragmatically Applied Cervical and Thoracic Nonthrust Manipulation Versus Thrust Manipulation for Patients With Mechanical Neck Pain: A Multicenter Randomized Clinical Trial.

Science.gov (United States)

Griswold, David; Learman, Ken; Kolber, Morey J; O'Halloran, Bryan; Cleland, Joshua A

2018-03-01

Study Design Randomized clinical trial. Background The comparative effectiveness between nonthrust manipulation (NTM) and thrust manipulation (TM) for mechanical neck pain has been investigated, with inconsistent results. Objective To compare the clinical effectiveness of concordant cervical and thoracic NTM and TM for patients with mechanical neck pain. Methods The Neck Disability Index (NDI) was the primary outcome. Secondary outcomes included the Patient-Specific Functional Scale (PSFS), numeric pain-rating scale (NPRS), deep cervical flexion endurance (DCF), global rating of change (GROC), number of visits, and duration of care. The covariate was clinical equipoise for intervention. Outcomes were collected at baseline, visit 2, and discharge. Patients were randomly assigned to receive either NTM or TM directed at the cervical and thoracic spines. Techniques and dosages were selected pragmatically and applied to the most symptomatic level. Two-way mixed-model analyses of covariance were used to assess clinical outcomes at 3 time points. Analyses of covariance were used to assess between-group differences for the GROC, number of visits, and duration of care at discharge. Results One hundred three patients were included in the analyses (NTM, n = 55 and TM, n = 48). The between-group analyses revealed no differences in outcomes on the NDI (P = .67), PSFS (P = .26), NPRS (P = .25), DCF (P = .98), GROC (P = .77), number of visits (P = .21), and duration of care (P = .61) for patients with mechanical neck pain who received either NTM or TM. Conclusion NTM and TM produce equivalent outcomes for patients with mechanical neck pain. The trial was registered with ClinicalTrials.gov (NCT02619500). Level of Evidence Therapy, level 1b. J Orthop Sports Phys Ther 2018;48(3):137-145. Epub 6 Feb 2018. doi:10.2519/jospt.2018.7738.

An All-Sky Portable (ASP) Optical Catalogue

Science.gov (United States)

Flesch, Eric Wim

2017-06-01

This optical catalogue combines the all-sky USNO-B1.0/A1.0 and most-sky APM catalogues, plus overlays of SDSS optical data, into a single all-sky map presented in a sparse binary format that is easily downloaded at 9 Gb zipped. Total count is 1 163 237 190 sources and each has J2000 astrometry, red and blue magnitudes with PSFs and variability indicator, and flags for proper motion, epoch, and source survey and catalogue for each of the photometry and astrometry. The catalogue is available on http://quasars.org/asp.html, and additional data for this paper is available at http://dx.doi.org/10.4225/50/5807fbc12595f.

Structure and morphology of magnetron sputter deposited ultrathin ZnO films on confined polymeric template

Energy Technology Data Exchange (ETDEWEB)

Singh, Ajaib [Discipline of Metallurgy Engineering and Materials Science, Indian Institute of Technology Indore, Indore 453552 (India); Schipmann, Susanne [II. Insatitute of Physics and JARA-FIT, RWTH Aachen University, 52056 Aachen (Germany); Mathur, Aakash; Pal, Dipayan [Discipline of Metallurgy Engineering and Materials Science, Indian Institute of Technology Indore, Indore 453552 (India); Sengupta, Amartya [Department of Physics, Indian Institute of Technology Delhi, Delhi 110016 (India); Klemradt, Uwe [II. Insatitute of Physics and JARA-FIT, RWTH Aachen University, 52056 Aachen (Germany); Chattopadhyay, Sudeshna, E-mail: sudeshna@iiti.ac.in [Discipline of Metallurgy Engineering and Materials Science, Indian Institute of Technology Indore, Indore 453552 (India); Discipline of Physics, Indian Institute of Technology Indore, Indore 453552 (India); Centre for Biosciences and Biomedical Engineering, Indian Institute of Technology Indore, Indore 453552 (India)

2017-08-31

Highlights: • Ultra-thin ZnO films grown on confined polymeric (polystyrene, PS) template. • XRR and GISAXS explore the surface/interfaces structure and morphology of ZnO/PS. • Insights into the growth mechanism of magnetron sputtered ZnO thin film on PS template. • Nucleated disk-like cylindrical particles are the basis of the formation of ZnO layers. • Effect of ZnO film thickness on room temperature PL spectra in ZnO/PS systems. - Abstract: The structure and morphology of ultra-thin zinc oxide (ZnO) films with different film thicknesses on confined polymer template were studied through X-ray reflectivity (XRR) and grazing incidence small angle X-ray scattering (GISAXS). Using magnetron sputter deposition technique ZnO thin films with different film thicknesses (<10 nm) were grown on confined polystyrene with ∼2R{sub g} film thickness, where R{sub g} ∼ 20 nm (R{sub g} is the unperturbed radius of gyration of polystyrene, defined by R{sub g} = 0.272 √M{sub 0}, and M{sub 0} is the molecular weight of polystyrene). The detailed internal structure, along the surface/interfaces and the growth direction of the system were explored in this study, which provides insight into the growth procedure of ZnO on confined polymer and reveals that a thin layer of ZnO, with very low surface and interface roughness, can be grown by DC magnetron sputtering technique, with approximately full coverage (with bulk like electron density) even in nm order of thickness, in 2–7 nm range on confined polymer template, without disturbing the structure of the underneath template. The resulting ZnO-polystyrene hybrid systems show strong ZnO near band edge (NBE) and deep-level (DLE) emissions in their room temperature photoluminescence spectra, where the contribution of DLE gets relatively stronger with decreasing ZnO film thickness, indicating a significant enhancement of surface defects because of the greater surface to volume ratio in thinner films.

Modeling astronomical adaptive optics performance with temporally filtered Wiener reconstruction of slope data

Science.gov (United States)

Correia, Carlos M.; Bond, Charlotte Z.; Sauvage, Jean-François; Fusco, Thierry; Conan, Rodolphe; Wizinowich, Peter L.

2017-10-01

We build on a long-standing tradition in astronomical adaptive optics (AO) of specifying performance metrics and error budgets using linear systems modeling in the spatial-frequency domain. Our goal is to provide a comprehensive tool for the calculation of error budgets in terms of residual temporally filtered phase power spectral densities and variances. In addition, the fast simulation of AO-corrected point spread functions (PSFs) provided by this method can be used as inputs for simulations of science observations with next-generation instruments and telescopes, in particular to predict post-coronagraphic contrast improvements for planet finder systems. We extend the previous results and propose the synthesis of a distributed Kalman filter to mitigate both aniso-servo-lag and aliasing errors whilst minimizing the overall residual variance. We discuss applications to (i) analytic AO-corrected PSF modeling in the spatial-frequency domain, (ii) post-coronagraphic contrast enhancement, (iii) filter optimization for real-time wavefront reconstruction, and (iv) PSF reconstruction from system telemetry. Under perfect knowledge of wind velocities, we show that $\\sim$60 nm rms error reduction can be achieved with the distributed Kalman filter embodying anti- aliasing reconstructors on 10 m class high-order AO systems, leading to contrast improvement factors of up to three orders of magnitude at few ${\\lambda}/D$ separations ($\\sim1-5{\\lambda}/D$) for a 0 magnitude star and reaching close to one order of magnitude for a 12 magnitude star.

Toward optimal spatial and spectral quality in widefield infrared spectromicroscopy of IR labelled single cells.

Science.gov (United States)

Mattson, Eric C; Unger, Miriam; Clède, Sylvain; Lambert, François; Policar, Clotilde; Imtiaz, Asher; D'Souza, Roshan; Hirschmugl, Carol J

2013-10-07

Advancements in widefield infrared spectromicroscopy have recently been demonstrated following the commissioning of IRENI (InfraRed ENvironmental Imaging), a Fourier Transform infrared (FTIR) chemical imaging beamline at the Synchrotron Radiation Center. The present study demonstrates the effects of magnification, spatial oversampling, spectral pre-processing and deconvolution, focusing on the intracellular detection and distribution of an exogenous metal tris-carbonyl derivative 1 in a single MDA-MB-231 breast cancer cell. We demonstrate here that spatial oversampling for synchrotron-based infrared imaging is critical to obtain accurate diffraction-limited images at all wavelengths simultaneously. Resolution criteria and results from raw and deconvoluted images for two Schwarzschild objectives (36×, NA 0.5 and 74×, NA 0.65) are compared to each other and to prior reports for raster-scanned, confocal microscopes. The resolution of the imaging data can be improved by deconvolving the instrumental broadening that is determined with the measured PSFs, which is implemented with GPU programming architecture for fast hyperspectral processing. High definition, rapidly acquired, FTIR chemical images of respective spectral signatures of the cell 1 and shows that 1 is localized next to the phosphate- and Amide-rich regions, in agreement with previous infrared and luminescence studies. The infrared image contrast, localization and definition are improved after applying proven spectral pre-processing (principal component analysis based noise reduction and RMie scattering correction algorithms) to individual pixel spectra in the hyperspectral cube.

Pohon pásového dopravníku pro transport uhlí

OpenAIRE

Kliš, Kamil

2013-01-01

Diplomová práce se zabývá návrhem pohonu pásového dopravníku pro transport uhlí. Práce obsahuje nezbytné výpočty dle norem potřebné k určení vhodných komponentů pásového dopravníku. Cílem diplomové práce bylo navrhnout pohon pásového dopravníku, všech jeho potřebných komponentů včetně návrhem rámu pohonu a vytvoření výkresové dokumentace. This diploma thesis deals with designing a drivetrain for a coal belt conveyor. Thesis contains necessary calculations according to norms needed for dete...

ZnO nanorod arrays prepared by chemical bath deposition combined with rapid thermal annealing: structural, photoluminescence and field emission characteristics

International Nuclear Information System (INIS)

Chen, Hung-Wei; He, Hsin-Min; Lee, Yi-Mu; Yang, Hsi-Wen

2016-01-01

ZnO nanorod arrays were prepared by low temperature chemical bath deposition (CBD) combined with rapid thermal annealing (RTA) under different ambient conditions. The structure and morphology of the synthesized ZnO have been characterized by field-emission scanning electron microscopy (FESEM) and x-ray diffraction (XRD). The obtained ZnO samples are highly crystalline with a hexagonal wurtzite phase and also display well-aligned array structure. A pronounced effect on increased nanorod length was found for the RTA-treated ZnO as compared to the as-grown ZnO. Analysis of XRD indicates that the (0 0 2) feature peak of the as-grown ZnO was shifted towards a lower angle as compared to the peaks of RTA-treated ZnO samples due to the reduction of tensile strain along the c-axis by RTA. Photoluminescence (PL) studies reveal that the ZnO nanorod arrays receiving RTA in an O 2 environment have the sharpest UV emission band and greatest intensity ratio of near band-edge emission (NBE) to deep level emission (DLE). Additionally, the effects of RTA on the field emission properties were evaluated. The results demonstrate that RTA an O 2 environment can lower the turn-on field and improve the field enhancement factor. The stability of the field emission current was also tested for 4 h. (paper)

Scatter kernel estimation with an edge-spread function method for cone-beam computed tomography imaging

International Nuclear Information System (INIS)

Li Heng; Mohan, Radhe; Zhu, X Ronald

2008-01-01

The clinical applications of kilovoltage x-ray cone-beam computed tomography (CBCT) have been compromised by the limited quality of CBCT images, which typically is due to a substantial scatter component in the projection data. In this paper, we describe an experimental method of deriving the scatter kernel of a CBCT imaging system. The estimated scatter kernel can be used to remove the scatter component from the CBCT projection images, thus improving the quality of the reconstructed image. The scattered radiation was approximated as depth-dependent, pencil-beam kernels, which were derived using an edge-spread function (ESF) method. The ESF geometry was achieved with a half-beam block created by a 3 mm thick lead sheet placed on a stack of slab solid-water phantoms. Measurements for ten water-equivalent thicknesses (WET) ranging from 0 cm to 41 cm were taken with (half-blocked) and without (unblocked) the lead sheet, and corresponding pencil-beam scatter kernels or point-spread functions (PSFs) were then derived without assuming any empirical trial function. The derived scatter kernels were verified with phantom studies. Scatter correction was then incorporated into the reconstruction process to improve image quality. For a 32 cm diameter cylinder phantom, the flatness of the reconstructed image was improved from 22% to 5%. When the method was applied to CBCT images for patients undergoing image-guided therapy of the pelvis and lung, the variation in selected regions of interest (ROIs) was reduced from >300 HU to <100 HU. We conclude that the scatter reduction technique utilizing the scatter kernel effectively suppresses the artifact caused by scatter in CBCT.

Aeroderivative advancement for power generation: Evolution of the Trend Econopac System

Energy Technology Data Exchange (ETDEWEB)

Buxton, R D [Rolls-Royce Industrial and Marine Gas Turbines Ltd., Coventry (United Kingdom); Thoman, R J [Westinghouse Electric Corp., Orlando, FL (United States)

1996-12-31

The design features and status of the development program for the Trent engine and the EconoPac generation plant, including the performance and testing program, were reviewed. The alliance formed by Rolls-Royce and Westinghouse for the Econopac project was described. The history of the development of the Trent turbofan engine and the Trent combustion turbine was presented, together with a description of the basic design of the compressors, the combustion system, and features of the modular construction. The main components of the EconoPac self-contained power plant`s were also described. Emissions and power output performance at ISO conditions were summarized. Testing programs for the Trent dry low emission (DLE) combustion system, and the after sales support programs for the Trent EconoPac were described. Indications were that the EconoPac would go into commercial use in late 1996. 6 figs.

Nástroj pro penetrační testování webových aplikací

OpenAIRE

Dobeš, Michal

2015-01-01

Tato práce se zabývá problematikou penetračního testování webových aplikací, se zaměřením na zranitelnosti Cross-Site Scripting (XSS) a SQL Injection (SQLI).  Popisuje technologie webových aplikací, nejběžnější zranitelnosti dle OWASP Top 10 a motivaci pro penetrační testování. Uvádí principy, dopady a doporučení pro nápravu zranitelností Cross-Site Scripting a SQL Injection. V rámci praktické části práce byl implementován nástroj pro podporu penetračního testování. Tento nástroj je rozšiřite...

Concept for Motivational System Change in a Selected Company

OpenAIRE

Ďurčová, Ivana

2017-01-01

Hlavním cílem této diplomové práce je navrhnout změnu motivačního systému ve Společnosti XY v konkrétním sídle v Amsterdamu v Nizozemí. Na základě teoretického základu motivačních teorií, údajů získaných kvalitativním a kvantitativním výzkumem byl navržen návrh motivačního systému s cílem zlepšit motivaci a pracovní spokojenost zaměstnanců. The main aim of this diploma thesis is to propose a motivational system change in the Company XY, in the particular office located in Amsterdam, Nether...

Dvoutrámový most přes řeku Bebravu

OpenAIRE

Hlavoň, Michal

2017-01-01

Předmětem diplomové práce je návrh mostu přes řeku Bebrava. Hlavní náplní je výpočet spojité nosní konstrukce o třech polích. Byly zpracovány tři varianty, z nichž byla zvolena varianta předpjatého dvoutrámovéhomostu.Rozpětí jednotlivých polích je 23+29+23 m. Statický model a účinky zatížení jsou řešeny v programu SciaEngeneer 15.1. Všechny výpočty jsou provedeny dle Eurokódů. The subject of diploma thesis is the design of the grinder over river Bebrava. The maintopic is static calculation...

Near band edge emission characteristics of sputtered nano-crystalline ZnO films

International Nuclear Information System (INIS)

Kunj, Saurabh; Sreenivas, K.

2016-01-01

Sputtered zinc oxide (ZnO) thin films deposited on unheated glass substrate under different sputtering gas mixtures (Ar+O_2) have been investigated using X-ray diffraction and photo luminescence spectroscopy. Earlier reported studies on ZnO films prepared by different techniques exhibit either a sharp/broad near band edge (NBE) emission peak depending on the crystalline quality of the film. In the present study zinc oxide films, grown on unheated substrates, are seen to possess a preferred (002) orientation with a microstructure consisting of clustered nano-sized crystallites. The splitting in the near band edge emission (NBE) into three characteristic peaks is attributed to quantum confinement effect, and is observed specifically under an excitation of 270 nm. Deep level emission (DLE) in the range 400 to 700 nm is not observed indicating absence of deep level radiative defects.

Near band edge emission characteristics of sputtered nano-crystalline ZnO films

Science.gov (United States)

Kunj, Saurabh; Sreenivas, K.

2016-05-01

Sputtered zinc oxide (ZnO) thin films deposited on unheated glass substrate under different sputtering gas mixtures (Ar+O2) have been investigated using X-ray diffraction and photo luminescence spectroscopy. Earlier reported studies on ZnO films prepared by different techniques exhibit either a sharp/broad near band edge (NBE) emission peak depending on the crystalline quality of the film. In the present study zinc oxide films, grown on unheated substrates, are seen to possess a preferred (002) orientation with a microstructure consisting of clustered nano-sized crystallites. The splitting in the near band edge emission (NBE) into three characteristic peaks is attributed to quantum confinement effect, and is observed specifically under an excitation of 270 nm. Deep level emission (DLE) in the range 400 to 700 nm is not observed indicating absence of deep level radiative defects.

Near band edge emission characteristics of sputtered nano-crystalline ZnO films

Energy Technology Data Exchange (ETDEWEB)

Kunj, Saurabh; Sreenivas, K. [Department of Physics & Astrophysics, University of Delhi, Delhi 110007 INDIA (India)

2016-05-06

Sputtered zinc oxide (ZnO) thin films deposited on unheated glass substrate under different sputtering gas mixtures (Ar+O{sub 2}) have been investigated using X-ray diffraction and photo luminescence spectroscopy. Earlier reported studies on ZnO films prepared by different techniques exhibit either a sharp/broad near band edge (NBE) emission peak depending on the crystalline quality of the film. In the present study zinc oxide films, grown on unheated substrates, are seen to possess a preferred (002) orientation with a microstructure consisting of clustered nano-sized crystallites. The splitting in the near band edge emission (NBE) into three characteristic peaks is attributed to quantum confinement effect, and is observed specifically under an excitation of 270 nm. Deep level emission (DLE) in the range 400 to 700 nm is not observed indicating absence of deep level radiative defects.

SPHENOID SINUS (SS ANTERIOR MEDIAL TEMPORAL LOBE ENCEPHALOCELE (AMTLE WITH SPONTANEOUS CSF RHINORRHOEA : A CASE REPORT

Directory of Open Access Journals (Sweden)

Laveena

2015-09-01

Full Text Available Cranial encephaloceles are the herniation of intracranial meninges and brain tissue through a defect in the cranium or skull base. These are rare conditions with an incidence of approximately 1 in 35,000 people, and are more common in the anterior cranial fossa than those in the middle one . 1,2 Temporal lobe herniation through a mid dle fossa defect into the lateral recess of the Sphenoid Sinus is even rarer than its medial representation. Intrasphenoidal encephaloceles are extremely rare findings 3 . Spontaneous, or primary, CSF fistula is a separate entity with no underlying cause of the CSF leak. Spontaneous CSF leaks are usually associated with a co - existing encephalocele of variable size 4 . We present a case of spontaneous CSF rhinorrhoea in a sphenoid sinus Anterior Medial Temporal lobe encephalocele herniating through a clinically silent lateral Craniopharyngeal canal.

Multikulturní prostředí a organizační kultura ve vybrané společnosti

OpenAIRE

Šimeček, Oto

2013-01-01

Cílem této bakalářské práce je porovnat vliv místního kulturního prostředí na firemní kulturu v Turecku a České Republice ve firmě REHAU AG. Výzkum probíhal v pobočkách německé firmy REHAU AG v Moravské Třebové, České republice a v Osmaneli/Bilecik, Turecku. Výzkum je založen na metodě VSM08 dle Geerta Hofsteda. Výstupem by mělo být shrnutí rozdílů firemní kultury a doporučení ohledně možností offshore outsourcingu do Turecka pro české firmy s ohledem na rozdílnost managementu. The aim of ...

Konverze objektu dormitory na hostel a jeho nové řešení v Tomioka Silk Mill, Japonsko

OpenAIRE

Brezovský, Jindřich

2012-01-01

Diplomová práce s názvem „KONVERZE OBJEKTU DORMITORY NA HOSTEL A JEHO NOVÉ ŘEŠENÍ V TOMIOKA SILK MILL, JAPONSKO“ je zpracována dle platných předpisů ve formě architektonické studie. Předmětem této práce jsou dvě varianty konverze objektu pro ubytování dělnic (dormitory). Dílčím úkolem je řešení úpravy zeleně v atriu dormitory a návrh revitalizace náhorní roviny. Objekt se nachází v areálu bývalé přádelny hedvábí ve městě Tomioka v prefektuře Gunma, na ostrově Honšú v Japonsku. Konverze objekt...

Finanční leasing z pohledu nájemce dle české legislativy a IFRS

OpenAIRE

Ťápalová, Hana

2008-01-01

The main goal of this bachelor's thesis is to create a comprehensive view of the problematics of the financial leasing from the leaseholder's point of view. The first part is focused on theoretical background of the financial leasing regulated by Czech legislation. It also describes financial leasing in light of accounting (evaluation and evidence, reporting leasing or advance payment) and taxes (corporation income tax, VAT and other ones). The second part is focused on International Financia...

Visualizing the characteristics of a work process being observed from the main control room of nuclear power plants - identifying underlying requirements

International Nuclear Information System (INIS)

Park, Jinkyun; Jung, Wondea

2015-01-01

One of the disseminated approaches is to identify and manage vulnerable tasks (i.e., error-prone tasks) by applying many kinds of human reliability assessment (HRA) techniques. That is, if HRA practitioners are able to identify plausible error forcing factors (e.g., performance shaping factors; PSFs) under a given task context, effective countermeasures that are helpful for reducing the possibility of human error can be drawn by deducing how to eliminate the associated PSFs. In order to reduce the variability of HRA results, the development of an objective criterion for determining the level of each PSF could be the most plausible countermeasure. In order to address this issue, this paper applied a process mining technique to the analysis of communication logs gathered from main control room (MCR) crews in NPPs, which could be useful for visualizing their characteristics in terms of the Work process. In this study, before providing additional information that is helpful for HRA practitioners in determining the quality of the Work process, three kinds of underlying requirements are identified. They are: (1) an ability to describe the flow of a work, (2) an ability to incorporate time and spatial information into the flow of a work, and (3) an ability to identify the flow of symptoms and/or knowledge being employed by an MCR crew. In order to satisfy these requirements, a couple of techniques can be used. This might allow partial pooling of log information according to how the information can be clustered.' In other words, the process mining technique is very useful for discovering the flow of a work being involved in a given situation, it is strongly expected that the analysis of communication logs that allow us to understand what and how they did in order to cope with a situation at hand. If so, it is possible to visualize necessary information that is essential for minimizing the variability of HRA practitioners who have to determine the quality of the Work

Visualizing the characteristics of a work process being observed from the main control room of nuclear power plants - identifying underlying requirements

Energy Technology Data Exchange (ETDEWEB)

Park, Jinkyun; Jung, Wondea [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

One of the disseminated approaches is to identify and manage vulnerable tasks (i.e., error-prone tasks) by applying many kinds of human reliability assessment (HRA) techniques. That is, if HRA practitioners are able to identify plausible error forcing factors (e.g., performance shaping factors; PSFs) under a given task context, effective countermeasures that are helpful for reducing the possibility of human error can be drawn by deducing how to eliminate the associated PSFs. In order to reduce the variability of HRA results, the development of an objective criterion for determining the level of each PSF could be the most plausible countermeasure. In order to address this issue, this paper applied a process mining technique to the analysis of communication logs gathered from main control room (MCR) crews in NPPs, which could be useful for visualizing their characteristics in terms of the Work process. In this study, before providing additional information that is helpful for HRA practitioners in determining the quality of the Work process, three kinds of underlying requirements are identified. They are: (1) an ability to describe the flow of a work, (2) an ability to incorporate time and spatial information into the flow of a work, and (3) an ability to identify the flow of symptoms and/or knowledge being employed by an MCR crew. In order to satisfy these requirements, a couple of techniques can be used. This might allow partial pooling of log information according to how the information can be clustered.' In other words, the process mining technique is very useful for discovering the flow of a work being involved in a given situation, it is strongly expected that the analysis of communication logs that allow us to understand what and how they did in order to cope with a situation at hand. If so, it is possible to visualize necessary information that is essential for minimizing the variability of HRA practitioners who have to determine the quality of the Work

Astronomy in Denver: Probing Interstellar Circular Polarization with Polvis, a Full Stokes Single Shot Polarimeter

Science.gov (United States)

Wolfe, Tristan; Stencel, Robert E.

2018-06-01

Measurements of optical circular polarization (Stokes V) introduced by dust grains in the ISM are important for two main reasons. First of all, the polarization itself contains information about the metallic versus dielectric composition of the dust grains themselves (H. C. van de Hulst 1957, textbook). Additionally, circular polarization can help constrain the interstellar component of the polarization of any source that may have intrinsic polarization, which needs to be calibrated for astrophysical study. Though interstellar circular polarization has been observed (P. G. Martin 1972, MNRAS 159), most broadband measurements of ISM polarization include linear polarization only (Stokes Q and U), due to the relatively low circular polarization signal and the added instrumentation complexity of including V-measurement capability. Prior circular polarization measurements have also received very little follow-up in the past several decades, even as polarimeters have become more accurate due to advances in technology. The University of Denver is pursuing these studies with POLVIS, a prototype polarimeter that utilizes a stress-engineered optic ("SEO", A. K. Spilman and T. G. Brown 2007, Applied Optics IP 46) to produce polarization-dependent PSFs (A. M. Beckley and T. G. Brown 2010, Proc SPIE 7570). These PSFs are analyzed to provide simultaneous Stokes I, Q, U, and V measurements, in a single beam and single image, along the line-of-sight to point source-like objects. Polvis is the first polarimeter to apply these optics and measurement techniques for astronomical observations. We present the first results of this instrument in B, V, and R wavebands, providing a fresh look at full Stokes interstellar polarization. Importantly, this set of efforts will constrain the ISM contribution to the polarization with respect to intrinsic stellar components. The authors are grateful to the estate of William Herschel Womble for the support of astronomy at the University of Denver

Nuclear Power Plant Operator Reliability Research Based on Fuzzy Math

Directory of Open Access Journals (Sweden)

Fang Xiang

2011-01-01

Full Text Available This paper makes use of the concept and theory of fuzzy number in fuzzy mathematics, to research for the response time of operator in accident of Chinese nuclear power plant. Through the quantitative analysis for the performance shape factors (PSFs which influence the response time of operators, the formula of the operator response time is obtained based on the possibilistic fuzzy linear regression model which is used for the first time in this kind of research. The research result shows that the correct research method can be achieved through the analysis of the information from a small sample. This method breaks through the traditional research method and can be used not only for the reference to the safe operation of nuclear power plant, but also in other areas.

Efeitos do modo ventilatório sobre variáveis hemogasométricas em equinos submetidos à mudança de decúbito durante a anestesia geral inalatória com halotano Effects of the ventilatory regimen on arterial blood gas variables in horses that underwent a change in body position during halothane anesthesia

Directory of Open Access Journals (Sweden)

P.A. Sá

2010-06-01

Full Text Available Compararam-se os efeitos da ventilação espontânea (V E e controlada (V C em equinos submetidos à mudança de decúbito durante anestesia. Dezesseis animais foram equitativamente divididos em dois grupos: V E e V C. Os procedimentos cirúrgicos foram iniciados com os animais em decúbito lateral esquerdo (DLE e, após 75 minutos, os animais foram reposicionados em decúbito lateral direito (DLD. Análises hemogasométricas do sangue arterial foram realizadas após 30 e 75 minutos com os animais posicionados em cada decúbito (M1 e M2 no DLE e M3 e M4 no DLD, respectivamente. Durante a V E, observaram-se hipercapnia (PaCO2 >45mmHg, acidose respiratória (pH The effects of spontaneous (SV and controlled ventilation (CV were compared in horses undergoing changes in body position during anesthesia. Sixteen animals were equally distributed in two groups: SV and CV. All surgical procedures were commenced on left lateral recumbency (LLR and 75 minutes later the animals were repositioned on right lateral recumbency (RLR. Arterial blood gas analyses were performed at 30 and 75 minutes after each recumbency (M1 and M2 for LLR and M3 and M4 for RLR. Hypercapnia (PaCO2 >45mmHg, respiratory acidosis (pH <7.35, and significant decrease in PaO2 after 75min of change in body position (M4: 205.8±124.7mmHg in comparison to PaO2 values before the change of position (M1: 271.8±84.8mmHg were observed during SV. When compared to the SV group, CV resulted in significantly higher PaO2 levels (52 to 96% increase. It was concluded that the change in the body position in spontaneously ventilating halothane-anesthetized horses causes impairment in arterial oxygenation. The use of CV since the beginning of anesthesia prevents the respiratory acidosis and maintains arterial oxygen levels that are closer to values expected during the use of 100% O2.

A multimodal physical therapy approach utilizing the Maitland concept in the management of a patient with cervical and lumbar radiculitis and Ehlers-Danlos syndrome-hypermobility type: A case report.

Science.gov (United States)

Pennetti, Adelina

2018-07-01

The purpose of this case report is to present a multimodal approach for patient management using the Maitland concept framework for cervical and lumbar radiculitis with an underlying diagnosis of Ehlers-Danlos Syndrome-Hypermobility Type (EDS-HT). This case presents care guided by evidence, patient values, and rationale for the selected course of physical therapy treatment provided by therapist experience. A 35-year-old female with a 2-year history of worsening lumbar and cervical pain was referred to physical therapy to address these musculoskeletal issues concurrent with diagnostic testing for EDS. A multimodal approach including manual therapy, therapeutic exercise, postural and body mechanics education, and a home exercise program was used. The patient specific functional scale (PSFS) was used to gauge patient's perceived improvements which were demonstrated by increased scores at reevaluation and at discharge. Following the Maitland concept framework, the physical therapist was able to make sound clinical decisions by tracking the logical flow of constant patient assessment. A 10-month course of treatment designed to maximize recovery of function was successful with a chronic history of pain and the EDS-HT diagnosis. The role of education and empowering the patient is shown to be of utmost importance. Optimizing therapeutic outcomes long-term for this patient population requires maintaining a home exercise program, adaptation and modifications of work and lifestyle activities.

Orofacial pain of cervical origin: A case report.

Science.gov (United States)

Ganesh, G Shankar; Sahu, Mamata Manjari; Tigga, Pramod

2018-04-01

The etiopathogenesis of orofacial pain remains complex and a number of pain referral patterns for this region have been reported in the literature. The purpose of this report is to describe the assessment and successful clinical management of orofacial pain possibly attributable to cervical origin. A 55-year-old male teacher with a 3-year history of pain in the right lower jaw, radiating to the ear, consulted our institute for assessment and management. The patient was unsuccessfully treated for dental pain and trigeminal neuralgia. The patient's functioning was grossly limited and the patient was unable to sleep because of severe pain. Current and previous medical and physical examinations revealed no infection, malignancies, or sinusitis. Palpation revealed no temporomandibular disorder, tenderness or myofascial trigger points. Examination of the cervical range of motion showed a reduction in rotation to the right side. The patient was treated for upper cervical joint dysfunction involving mobilization of the first three cervical vertebrae and motor control exercises. The patient had an almost complete resolution of symptoms and reported significant improvement in the Patient Specific Functional Scale (PSFS) and the Global Rating of Change (GRC) scale. This case study demonstrates the importance of considering, assessing and treating the cervical spine as a possible source of orofacial pain, and the positive role of cervical mobilization on these disorders. Copyright © 2017 Elsevier Ltd. All rights reserved.

Team resource management participant's handbook for the atomic vapor laser isotope separation program

International Nuclear Information System (INIS)

Bennett, T.

1998-01-01

The goal of any operation is to complete tasks efficiently and effectively. Working safely is completely consistent with efficient, reliable operations. Working in an unsafe manner is not effective or ultimately efficient. If someone is hurt, work stops. Following the steps advocated by Team Resource Management (TRM) leads to more safe, efficient, effective work habits. TRM is a method used by teams (i.e., leaders and workers) to conduct technical business. It is used by the aviation industry to improve reliability and safety through formalizing the way it does business. High reliability organizations do exist. They conduct thousands of high-consequence operations a year, essentially error-free. Naval air carriers, air traffic control, and commercial aviation are some of these kinds of organizations. How did they get that way? What kinds of people staff them? Can we become a high reliability organization? This workshop will look at these questions. When we are done, it will be up to you to determine if we have the right stuff. The goals of this workshop are to: Describe Team Resource Management and its purpose; Describe Performance Shaping Factors (PSFs) and their role in predicting and managing team performance and errors; Describe the principles for managing human error; Describe TRMs 12 rules-of-thumb (the Dirty Dozen) and use of safety nets; Conduct Operational Risk Management (ORM); Demonstrate ways to keep TRM working

Multi-Unit Considerations for Human Reliability Analysis

Energy Technology Data Exchange (ETDEWEB)

St. Germain, S.; Boring, R.; Banaseanu, G.; Akl, Y.; Chatri, H.

2017-03-01

This paper uses the insights from the Standardized Plant Analysis Risk-Human Reliability Analysis (SPAR-H) methodology to help identify human actions currently modeled in the single unit PSA that may need to be modified to account for additional challenges imposed by a multi-unit accident as well as identify possible new human actions that might be modeled to more accurately characterize multi-unit risk. In identifying these potential human action impacts, the use of the SPAR-H strategy to include both errors in diagnosis and errors in action is considered as well as identifying characteristics of a multi-unit accident scenario that may impact the selection of the performance shaping factors (PSFs) used in SPAR-H. The lessons learned from the Fukushima Daiichi reactor accident will be addressed to further help identify areas where improved modeling may be required. While these multi-unit impacts may require modifications to a Level 1 PSA model, it is expected to have much more importance for Level 2 modeling. There is little currently written specifically about multi-unit HRA issues. A review of related published research will be presented. While this paper cannot answer all issues related to multi-unit HRA, it will hopefully serve as a starting point to generate discussion and spark additional ideas towards the proper treatment of HRA in a multi-unit PSA.

Předpjatý most číslo 207 přes rychlostní komunikaci R2 na Slovensku

OpenAIRE

Ježek, Rostislav

2015-01-01

V diplomové práci „Předpjatý most číslo 207 přes rychlostní komunikaci R2 na Slovensku“ jsou vypracovány tři varianty řešení přemostění. Cílem práce je zhodnotit navržené varianty a provést podrobný návrh nosné konstrukce vybrané varianty. Součástí práce je zohlednění vlivu výstavby. K podrobné statické analýze byla zvolena varianta komorového mostu s šikmými stěnami o třech polích. Tato dodatečně předpjatá konstrukce je posouzena dle platných Evropských norem. Analýza konstrukce je provedena...

Construction of a power plant with prototype DLN combustion turbines

Energy Technology Data Exchange (ETDEWEB)

Wilkinson, M.L. [CSW Energy, Dallas, TX (United States); Drummond, L.J. [Zurn NEPCO, Redmond, WA (United States)

1996-12-31

Design and construction of a power plant is always a difficult process and this is especially true when the main keystone, the combustion turbine engine, is being modified by the manufacturer resulting in numerous changes in the design interfaces. The development of the design and construction of the Orange Cogeneration Facility has been in parallel with major modification of the LM6000 to DLE technology (a Dry Low NO{sub x} combustion system). The Dry Low NO{sub x} Combustion System for a combustion turbine offered a means to reduce water usage, lower Zero Liquid Discharge System operating costs and reduce emissions to meet Florida Department of Environmental Protection requirements. This development was successfully accomplished by Owner, EPC contractor and Combustion Turbine Manufacturer by maintaining flexibility in the design and construction while the design interfaces and performance of the combustion turbines were being finalized.

Využití vlnkové transformace pro zpracování snímků sítnice

OpenAIRE

Portyš, Jakub

2010-01-01

Práce je zaměřena na využití vlnkové transformace v diagnostice chorob očního pozadí resp. sítnice. Vlnková transformace umožňuje dekompozici obrazu očního pozadí. S následnou segmentací pomocí prahování to vede k lepší přehlednosti obrazu a jednodušší diagnostice morfologicko-anatomických změn na očním pozadí. Součástí práce je též seznámení s vlnkovou transformací a rodinou mateřských vlnek. Zběžně je v práci rozebrán rozklad obrazu dle RGB barevného modelu, filtrace obrazu a prahování. V ú...

Novostavba rodinného domu se dvěma bytovými jednotkami v Galantě v části Kolónia

OpenAIRE

Varjú, Marián

2015-01-01

Bakalářská práce „Novostavba rodinného domu se dvěma bytovými jednotkami v Galanta v části Kolónia“ je zpracována ve formě prováděcí projektové dokumentace a obsahuje všechny náležitosti dle platných předpisů. Navržený objekt leží na parcelách s číslem 5184/143, 5184/40 v Galantě v části Kolónia. Svým charakterem se jedná o samostatně stojící objekt. Rodinný dům je navržen systémem Durisol od Leier. Konstrukce střechy je rozdělena do dvou úrovní. Střecha je tvořena z pultové vaznicové konstru...

Optimalizace systému zaměstnaneckých benefitů v podniku

OpenAIRE

Knyblová, Lucie

2009-01-01

Cílem diplomové práce „Optimalizace systému zaměstnaneckých benefitů v podniku“ je analyzovat zaměstnanecké benefity dle současné právní úpravy z pohledu daňového zatížení podniku i zaměstnance. Dílčím cílem je na základě dotazníkového šetření zjistit spokojenost zaměstnanců se současným systémem zaměstnaneckých benefitů v konkrétním podniku a navrhnout určité změny, které povedou ke spokojenosti zaměstnanců a optimalizaci systému z daňového hlediska jak pro zaměstnance tak pro zaměstnavatele...

Dlouhodobá hmotná aktiva dle IFRS a srovnání s ČÚS

OpenAIRE

Mervartová, Andrea

2010-01-01

The thesis deals with problems of tangible fixed assets in terms of two accounting modifications - International Financial Reporting Standards and Czech accounting standards. The main objective of this study then is comparison of both the accounting rules in this area and in particular to find their essential differences.

Konsolidace účetní závěrky dle české legislativy a IFRS/IAS

OpenAIRE

KYJOVSKÝ, Jindřich

2013-01-01

The goal of this dissertation was to specify duties for company, methods of consolidation, describe conditions and to insight into consolidated financial statement according to czech law and to IFRS. First thing that was needed was to collect necessary documents. At accounting unit was performed straight consolidation in accordance to full method. There were no partial statements assembled. Only one consolidated statement for whole consolidation unit was created. Chosen consolidation unit was...

Does quality improvement work in neonatology improve clinical outcomes?

Science.gov (United States)

Ellsbury, Dan L; Clark, Reese H

2017-04-01

Quality improvement initiatives in neonatology have been promoted as an important way of improving outcomes of newborns. The purpose of this review is to examine the effectiveness of recent quality improvement work in improving the outcomes of infants requiring neonatal intensive care. Quality improvement collaboratives and single-center projects demonstrate improvement of clinical processes and outcomes in neonatology that impact both preterm and term infants. Declines in morbidities, resource use, and length of stay have been associated with reductions in healthcare costs. Recent quality improvement work has shown evidence of improvement in clinical outcomes in neonatal intensive care patients. These improvements have important implications for the reduction of healthcare costs in this population.

Continuous Improvement and Collaborative Improvement: Similarities and Differences

DEFF Research Database (Denmark)

Middel, Rick; Boer, Harry; Fisscher, Olaf

2006-01-01

the similarities and differences between key components of continuous and collaborative improvement by assessing what is specific for continuous improvement, what for collaborative improvement, and where the two areas of application meet and overlap. The main conclusions are that there are many more similarities...... between continuous and collaborative improvement. The main differences relate to the role of hierarchy/market, trust, power and commitment to collaboration, all of which are related to differences between the settings in which continuous and collaborative improvement unfold....

Team errors: definition and taxonomy

International Nuclear Information System (INIS)

Sasou, Kunihide; Reason, James

1999-01-01

In error analysis or error management, the focus is usually upon individuals who have made errors. In large complex systems, however, most people work in teams or groups. Considering this working environment, insufficient emphasis has been given to 'team errors'. This paper discusses the definition of team errors and its taxonomy. These notions are also applied to events that have occurred in the nuclear power industry, aviation industry and shipping industry. The paper also discusses the relations between team errors and Performance Shaping Factors (PSFs). As a result, the proposed definition and taxonomy are found to be useful in categorizing team errors. The analysis also reveals that deficiencies in communication, resource/task management, excessive authority gradient, excessive professional courtesy will cause team errors. Handling human errors as team errors provides an opportunity to reduce human errors

Human events reference for ATHEANA (HERA) database description and preliminary user`s manual

Energy Technology Data Exchange (ETDEWEB)

Auflick, J.L.; Hahn, H.A.; Pond, D.J.

1998-05-27

The Technique for Human Error Analysis (ATHEANA) is a newly developed human reliability analysis (HRA) methodology that aims to facilitate better representation and integration of human performance into probabilistic risk assessment (PRA) modeling and quantification by analyzing risk-significant operating experience in the context of existing behavioral science models. The fundamental premise of ATHEANA is that error-forcing contexts (EFCs), which refer to combinations of equipment/material conditions and performance shaping factors (PSFs), set up or create the conditions under which unsafe actions (UAs) can occur. Because ATHEANA relies heavily on the analysis of operational events that have already occurred as a mechanism for generating creative thinking about possible EFCs, a database, called the Human Events Reference for ATHEANA (HERA), has been developed to support the methodology. This report documents the initial development efforts for HERA.

Human Events Reference for ATHEANA (HERA) Database Description and Preliminary User's Manual

Energy Technology Data Exchange (ETDEWEB)

Auflick, J.L.

1999-08-12

The Technique for Human Error Analysis (ATHEANA) is a newly developed human reliability analysis (HRA) methodology that aims to facilitate better representation and integration of human performance into probabilistic risk assessment (PRA) modeling and quantification by analyzing risk-significant operating experience in the context of existing behavioral science models. The fundamental premise of ATHEANA is that error forcing contexts (EFCs), which refer to combinations of equipment/material conditions and performance shaping factors (PSFs), set up or create the conditions under which unsafe actions (UAs) can occur. Because ATHEANA relies heavily on the analysis of operational events that have already occurred as a mechanism for generating creative thinking about possible EFCs, a database (db) of analytical operational events, called the Human Events Reference for ATHEANA (HERA), has been developed to support the methodology. This report documents the initial development efforts for HERA.

Human events reference for ATHEANA (HERA) database description and preliminary user's manual

International Nuclear Information System (INIS)

Auflick, J.L.; Hahn, H.A.; Pond, D.J.

1998-01-01

The Technique for Human Error Analysis (ATHEANA) is a newly developed human reliability analysis (HRA) methodology that aims to facilitate better representation and integration of human performance into probabilistic risk assessment (PRA) modeling and quantification by analyzing risk-significant operating experience in the context of existing behavioral science models. The fundamental premise of ATHEANA is that error-forcing contexts (EFCs), which refer to combinations of equipment/material conditions and performance shaping factors (PSFs), set up or create the conditions under which unsafe actions (UAs) can occur. Because ATHEANA relies heavily on the analysis of operational events that have already occurred as a mechanism for generating creative thinking about possible EFCs, a database, called the Human Events Reference for ATHEANA (HERA), has been developed to support the methodology. This report documents the initial development efforts for HERA

Strategies of modeling the cognitive tasks of human operators for accident scenarios in nuclear power plant control rooms

International Nuclear Information System (INIS)

Cheon, Se Woo; Sur, Sang Moon; Lee, Yong Hee; Lee, Jeong Wun

1993-01-01

This paper presents the development strategies of cognitive task network modeling for accident scenarios in nuclear power plant control rooms. Task network modeling is used to provide useful predictions of operator's performance times and error rates, based upon plant procedures and/or control room changes. Two accident scenarios, small-break loss of coolant accident (LOCA) and steam generator tube rupture (SGTR), are selected for task simulation. To obtain the input data for the model, task elements are extracted by the task analysis of emergency operating procedures. The input data include task performance time, communication ink, panel location, component operating mode, and data for performance shaping factors (PSFs). Operator's verbs are categorized according to the elements of cognitive behavior. The simulation of the task network for the small-break LOCA scenario is presented in this paper. (Author)

Streaming Multiframe Deconvolutions on GPUs

Science.gov (United States)

Lee, M. A.; Budavári, T.

2015-09-01

Atmospheric turbulence distorts all ground-based observations, which is especially detrimental to faint detections. The point spread function (PSF) defining this blur is unknown for each exposure and varies significantly over time, making image analysis difficult. Lucky imaging and traditional co-adding throws away lots of information. We developed blind deconvolution algorithms that can simultaneously obtain robust solutions for the background image and all the PSFs. It is done in a streaming setting, which makes it practical for large number of big images. We implemented a new tool that runs of GPUs and achieves exceptional running times that can scale to the new time-domain surveys. Our code can quickly and effectively recover high-resolution images exceeding the quality of traditional co-adds. We demonstrate the power of the method on the repeated exposures in the Sloan Digital Sky Survey's Stripe 82.

Human Events Reference for ATHEANA (HERA) Database Description and Preliminary User's Manual

International Nuclear Information System (INIS)

Auflick, J.L.

1999-01-01

The Technique for Human Error Analysis (ATHEANA) is a newly developed human reliability analysis (HRA) methodology that aims to facilitate better representation and integration of human performance into probabilistic risk assessment (PRA) modeling and quantification by analyzing risk-significant operating experience in the context of existing behavioral science models. The fundamental premise of ATHEANA is that error forcing contexts (EFCs), which refer to combinations of equipment/material conditions and performance shaping factors (PSFs), set up or create the conditions under which unsafe actions (UAs) can occur. Because ATHEANA relies heavily on the analysis of operational events that have already occurred as a mechanism for generating creative thinking about possible EFCs, a database (db) of analytical operational events, called the Human Events Reference for ATHEANA (HERA), has been developed to support the methodology. This report documents the initial development efforts for HERA

The Supercontinuum Laser Source Fundamentals with Updated References

CERN Document Server

Alfano, Robert R

2006-01-01

Photonics and nonlinear optics are important areas of science, engineering and technology. One of the most important ultrafast nonlinear optical processes is the supercontinuum (SC) – the production of intense white light pulses covering: uv, visible, NIR, MIR, and IR. It is produced using ultrashort laser pulses (ps/fs) to produce the ultrabroad band of frequencies. This book covers the fundamental principles and surveys research of current thinkers and experts in the field with updated references of the key breakthroughs over the past decade and a half. The application of SC are time-resolved pump-SC probe absorption and excitation spectroscopy for chemistry, biology and physics fundamental processes; optical coherence tomography; ultrashort pulse generation in femtosecond and attosecond regions; frequency clocks; phase stabilization; optical communication; atmospheric science; lightning control; optical medical imaging; biological cell imaging; and metrology standards.

The Dichotic Digits difference Test (DDdT): Development, Normative Data, and Test-Retest Reliability Studies Part 1.

Science.gov (United States)

Cameron, Sharon; Glyde, Helen; Dillon, Harvey; Whitfield, Jessica; Seymour, John

2016-06-01

The dichotic digits test is one of the most widely used assessment tools for central auditory processing disorder. However, questions remain concerning the impact of cognitive factors on test results. To develop the Dichotic Digits difference Test (DDdT), an assessment tool that could differentiate children with cognitive deficits from children with genuine dichotic deficits based on differential test results. The DDdT consists of four subtests: dichotic free recall (FR), dichotic directed left ear (DLE), dichotic directed right ear (DRE), and diotic. Scores for six conditions are calculated (FR left ear [LE], FR right ear [RE], and FR total, as well as DLE, DRE, and diotic). Scores for four difference measures are also calculated: dichotic advantage, right-ear advantage (REA) FR, REA directed, and attention advantage. Experiment 1 involved development of the DDdT, including error rate analysis. Experiment 2 involved collection of normative and test-retest reliability data. Twenty adults (aged 25 yr 10 mo to 50 yr 7 mo, mean 36 yr 4 mo) took part in the development study; 62 normal-hearing, typically developing, primary-school children (aged 7 yr 1 mo to 11 yr 11 mo, mean 9 yr 4 mo) and 10 adults (aged 25 yr 0 mo to 51 yr 6 mo, mean 34 yr 10 mo) took part in the normative and test-retest reliability study. In Experiment 1, error rate analysis was conducted on the 36 digit-pair combinations of the DDdT. Normative data collected in Experiment 2 were arcsine transformed to achieve a distribution that was closer to a normal distribution and z-scores calculated. Pearson product-moment correlations were used to determine the strength of relationships between DDdT conditions. The development study revealed no significant differences in the adult population between test and retest on any DDdT condition. Error rates on 36 digit pairs ranged from 1.5% to 16.7%. The most and the least error-prone digits were removed before commencement of the normative data study, leaving 25

Fabrication of high responsivity deep UV photo-detector based on Na doped ZnO nanocolumns

Science.gov (United States)

Agrawal, Jitesh; Dixit, Tejendra; Palani, I. A.; Ramachandra Rao, M. S.; Singh, Vipul

2018-05-01

We report a variety of the hydrothermally synthesized ZnO nanostructures with a significant suppression in defect-related emission and huge enhancement in the photo-current to the dark current ratio (approximately six orders of magnitude) upon UV light illumination. Interestingly, the photo-detector shows lower dark current of 1.6 nA with high responsivity of 507 A W‑1 at 254 nm. Here, a systematic analysis of the growth process as well as the physical, chemical and electrical properties of as-grown ZnO nanostructures has been performed. We have utilized the duo effect of both the inorganic (KMnO4) and organic (Na3C6H5O7) additives, which has facilitated the precise tuning of the morphology and intrinsic defects in nanostructures that have made an impact on the photo-responsivity, photoluminescence (PL) and adhesivity of the film on to the underlying substrate. PL analysis of as-grown ZnO nanostructures has suggested 11 times improvement in the near band emission (NBE) to defect level emission (DLE) ratio. Interestingly, thermal annealing of the samples has shown a dramatic change in the morphology with significant improvement in the crystallinity. Notably, the band gap was observed to be modulated from 3.3 eV to 3.1 eV after annealing. In addition to UV photo-detector based applications, the work presented here has provided a subtle solution towards the rectification of various problems pertaining to hydrothermal processes like poor adhesivity, feeble UV emission and problem in precise tuning of the morphology along with the bandgap in one go. Therefore, these investigations assume critical significance towards the development of next-generation optoelectronic devices.

The Use of Means of Artificial Intelligence for the Decision Making Support in the Firm

OpenAIRE

Kováčová, Zuzana

2011-01-01

Diplomová práce se zaměřuje na využití genetických algoritmů pro úlohy vycházející z problému obchodního cestujícího. Na základě teoretických poznatků a analýzy problému poskytuje návrh řešení, které s ohledem na omezující podmínky sestaví denní plán tras pro servisní techniky. Případová studie ukazuje, že navržené řešení v porovnání s plánováním dle zkušeností umožňuje snížit náklady na dopravu. The diploma thesis focuses on the use of genetic algorithms for tasks related to the travellin...

Rozhraní typu I2C a jejich implementační možnosti v technologiích ASIC

OpenAIRE

Podzemný, Jakub

2016-01-01

Práce se zabývá možnostmi implementace I2C, SMBus a PMBus rozhraní v současných technologiích ASIC. V první části se práce zaměřuje na popis jednotlivých sběrnic a jejich vzájemných rozdílů dle nejnovějších specifikací z digitálního a funkčního pohledu. Analogová část problematiky je zde z velké části zanedbána. Dále se práce zabývá porovnáním vybraných I2C/SMBus slave modulů vytvořených firmou ON Semiconductor, popsaných v jazyce Verilog HDL, z hlediska počtu klopných obvodů, funkčnosti a př...

Wellness centrum

OpenAIRE

Krchňák, Petr

2016-01-01

Diplomová práce „Wellness centrum'' je zpracována ve formě prováděcí dokumentace obsahující všechny náležitosti dle platných norem a předpisů. Navržený objekt je řešen jako třípodlažní budova. Objekt slouží veřejnosti k rekreaci a sportu. V 1S je umístěno technické zázemí, zázemí pro zaměstnance, šatny a posilovna. V 1 NP se nachází kavárna a wellness. Ve 2NP se nachází kanceláře pro administrativu budovy, masáže, solárium, šatny a fitness sál. Budova je založena na základových patkách a nosn...

Montovaná konstrukce haly ve Vysokém Mýtě

OpenAIRE

Jarmara, Pavel

2017-01-01

Tato diplomová práce se zabývá návrhem a statickým výpočtem montované, skladovací haly. V rámci práce jsem navrhnul a posoudil předpjatý vazník, železobetonový vazník, vazničku, sloup a kalichovou patku. Prvky jsou posouzeny na mezní stav únosnosti. Řešení vnitřních sil vazníků bylo provedeno ručním výpočtem. Vnitřní síly sloupu a patky byly určeny v programu Scia Engenner. Uvedené výpočty jsou provedeny dle Eurokódu 2. Ke všem navrženým prvků jsem také narýsoval výkresy tvaru a výztuže. T...

PREDICATIVE VALUE OF SOME COMMON MOBILITY TESTS CRUCIAL FOR FORMING MARK IN THE PHYiCAL EDUCATION TEACHING

Directory of Open Access Journals (Sweden)

Danijela Bulatović

2007-05-01

Full Text Available Up to the sam ple of 86 stu dents from 5th class of Ele men tary School »Ok to ih« in Pod go ri ca, we ma de re se arch in or der to esta blish the le vel of sta ti sti cal im por tan ce of the com mon mo bi lity tests in fl u en ce for for ming of the physi cal edu ca tion mark. By using of Pir son cor re la ti ve analysis, fol lo wed by the re gres si ve analysis, it was esta blis hed the im por tant mu tual con nec tion bet we en pre di ca ti ve and cri te rion va ri a ble. The co ef fi ci ent of cor re la tion has been spread from the mid dle (MT600= . 488, to the high nu me ri cal va lu es (MSDM =. 735.

Sujeto, ética y formación. En la senda de Bajtín

Directory of Open Access Journals (Sweden)

Alfonso Cárdenas Páez

2016-12-01

Full Text Available Este artículo es resultado de la investigación dle-033-99, patrocinada por upn-ciup. Trata de la relación entre el sujeto, la ética y la formación desde la perspectiva dialógica de Bajtín. Por un lado, plantea que el sujeto es un ser dialógico abierto e inconcluso, situado éticamente en relación con el otro y la cultura. Por otro lado, reconoce que la educación es un acto ético responsable; este acto se sitúa en el horizonte del sentido. Al final, propone varias conclusiones: a la educación es un proceso ético que debe promover la comprensión dentro de los márgenes de la diversidad; b debe atender a la disputa ideológica y a la heteroglosia social; c debe contribuir a la formación de sujetos singulares y responsables

Synthesis of organic EL materials with cyano group and evaluation of emission characteristics in organic EL devices

International Nuclear Information System (INIS)

Kim, Dong Uk

1999-01-01

Nobel electroluminescent materials, polymer material, PU-BCN and low molar mass material, D-BCN with the same chromophores were designed and synthesized. A molecular structure of chromophore was composed of bisstyrylbenzene derivative with cyano groups as electron injection and transport and phenylamine groups as hole injection and transport. Device structures with PU-BCN and D-BCN as an emission layer were fabricated, which were a single-layer device(SL), Indium-tin oxide(ITO)/emission layer/MgAg, and two kinds of double-layer devices which were composed of ITO/emission layer/oxadiazole derivative/MgAg as a DL-E device and ITO/triphenylamine derivative/emission layer/MgAg as a DL-H device. The two emission materials, PU-BCN and D-BCN with the same emission-chromophore were evaluated as having excellent performance of charge injection and transport and revealed almost the same emission characteristics in high current density. EL emission maximum peaks of two material were detected at about 640 nm wavelength of red emission region

Effects of ZnO Seed Layers Prepared with Various Precursor Concentrations on Structural and Defect Emission Properties of ZnO Nanorods Grown by Hydrothermal Method

Energy Technology Data Exchange (ETDEWEB)

Kim, Soaram; Nam, Giwoong; Leem, Jae-Young; Kim, Yangsoo [Inje University, Gimhae (Korea, Republic of); Kim, Ghun Sik; Yoon, Sung Pil [Korea Institute of Science and Technology, Seoul (Korea, Republic of)

2013-07-15

ZnO nanorods were grown by a hydrothermal method on ZnO seed layers that had previously been prepared from solutions containing various precursor concentrations. The effects of the ZnO seed layers prepared with various precursor concentrations on the structural and defect emissions of the ZnO nanorods were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), and photoluminescence (PL) spectroscopy. The surface morphology of the ZnO seed layers changed with an increasing precursor concentration, and the diameters and densities of the ZnO nanorods depended on the morphologies of the ZnO seed layers. The ZnO seed layers prepared with various precursor concentrations affected the residual stress in the nanorods grown on the seed layers, the intensity and full widths at half maximum of the 2-theta angle in the XRD spectra for the nanorods, and the intensity and position of the defect emission peak in deep-level emission (DLE) PL spectra for the ZnO nanorods.

Řadový bytový dům - zdravotně technické a plynovodní instalace

OpenAIRE

Hájek, Petr

2013-01-01

Abstrakt v českém jazyce Bakalářská práce se zabývá zdravotně technickými a plynovodními instalacemi. V teoretické části se zabývá hospodařením s dešťovou vodou retenčními nádržemi a vsakovacími zařízeními. Výpočtová část a projekt obsahuje návrh vnitřního vodovodu, vnitřní kanalizace,domovního plynovodu a připojení objektu na stávající sítě technického vybavení. Objektem je nepodsklepený řadový bytový dům o čtyřech podlažích. Projekt byl vytvořen dle současných českých a evropských předpisů....

Byzantine Music

OpenAIRE

Charalampous, Charalampos

2007-01-01

Magdalény Rettigové 4, 116 39 Praha 1 tel.: +420 221 900 111 www.pedf.cuni.cz IČ 00216208 DIČ CZ00216208 Dle čl. 4 Opatření rektora č. 6/2010 o Zpřístupnění elektronické databáze závěrečných prací http://www.cuni.cz/UK-3470.html a čl. 1 Opatření děkana 17/2010 se z časového hlediska závěrečné práce dělí do tří skupin: a. "nové práce", tj. práce odevzdávané k obhajobě počínaje 29. 9. 2010, b. "starší práce", tj. práce odevzdané k obhajobě od 1. 1. 2006 do 28. 9. 2010, c. "práce před rokem 2006...

Improving Patient Safety: Improving Communication.

Science.gov (United States)

Bittner-Fagan, Heather; Davis, Joshua; Savoy, Margot

2017-12-01

Communication among physicians, staff, and patients is a critical element in patient safety. Effective communication skills can be taught and improved through training and awareness. The practice of family medicine allows for long-term relationships with patients, which affords opportunities for ongoing, high-quality communication. There are many barriers to effective communication, including patient factors, clinician factors, and system factors, but tools and strategies exist to address these barriers, improve communication, and engage patients in their care. Use of universal precautions for health literacy, appropriate medical interpreters, and shared decision-making are evidence-based tools that improve communication and increase patient safety. Written permission from the American Academy of Family Physicians is required for reproduction of this material in whole or in part in any form or medium.

Improving Earth/Prediction Models to Improve Network Processing

Science.gov (United States)

Wagner, G. S.

2017-12-01

The United States Atomic Energy Detection System (USAEDS) primaryseismic network consists of a relatively small number of arrays andthree-component stations. The relatively small number of stationsin the USAEDS primary network make it both necessary and feasibleto optimize both station and network processing.Station processing improvements include detector tuning effortsthat use Receiver Operator Characteristic (ROC) curves to helpjudiciously set acceptable Type 1 (false) vs. Type 2 (miss) errorrates. Other station processing improvements include the use ofempirical/historical observations and continuous background noisemeasurements to compute time-varying, maximum likelihood probabilityof detection thresholds.The USAEDS network processing software makes extensive use of theazimuth and slowness information provided by frequency-wavenumberanalysis at array sites, and polarization analysis at three-componentsites. Most of the improvements in USAEDS network processing aredue to improvements in the models used to predict azimuth, slowness,and probability of detection. Kriged travel-time, azimuth andslowness corrections-and associated uncertainties-are computedusing a ground truth database. Improvements in station processingand the use of improved models for azimuth, slowness, and probabilityof detection have led to significant improvements in USADES networkprocessing.

Continuous Improvement and Collaborative Improvement: Similarities and Differences

NARCIS (Netherlands)

Middel, H.G.A.; Boer, Harm; Fisscher, O.A.M.

2006-01-01

A substantial body of theoretical and practical knowledge has been developed on continuous improvement. However, there is still a considerable lack of empirically grounded contributions and theories on collaborative improvement, that is, continuous improvement in an inter-organizational setting. The

"Rheum to Improve": Quality Improvement in Outpatient Rheumatology.

Science.gov (United States)

Chow, Shirley L; Shojania, Kaveh G

2017-09-01

The commitment to improve care processes and patient outcomes is a professional mandate for clinicians and is also seen as an operational priority for institutions. Quality improvement now figures in the accreditation of training programs, specialty examinations, and hospital scorecards. Rheumatologists have traditionally focused primarily on quality problems such as guideline adherence; however, improvement goals should also include other aspects of care that are helpful to patients and are professionally rewarding for practitioners. This review makes use of improvement projects in outlining tangible tools rheumatologists can use to resolve quality concerns in their practices.

A virtual source model for Monte Carlo simulation of helical tomotherapy.

Science.gov (United States)

Yuan, Jiankui; Rong, Yi; Chen, Quan

2015-01-08

The purpose of this study was to present a Monte Carlo (MC) simulation method based on a virtual source, jaw, and MLC model to calculate dose in patient for helical tomotherapy without the need of calculating phase-space files (PSFs). Current studies on the tomotherapy MC simulation adopt a full MC model, which includes extensive modeling of radiation source, primary and secondary jaws, and multileaf collimator (MLC). In the full MC model, PSFs need to be created at different scoring planes to facilitate the patient dose calculations. In the present work, the virtual source model (VSM) we established was based on the gold standard beam data of a tomotherapy unit, which can be exported from the treatment planning station (TPS). The TPS-generated sinograms were extracted from the archived patient XML (eXtensible Markup Language) files. The fluence map for the MC sampling was created by incorporating the percentage leaf open time (LOT) with leaf filter, jaw penumbra, and leaf latency contained from sinogram files. The VSM was validated for various geometry setups and clinical situations involving heterogeneous media and delivery quality assurance (DQA) cases. An agreement of < 1% was obtained between the measured and simulated results for percent depth doses (PDDs) and open beam profiles for all three jaw settings in the VSM commissioning. The accuracy of the VSM leaf filter model was verified in comparing the measured and simulated results for a Picket Fence pattern. An agreement of < 2% was achieved between the presented VSM and a published full MC model for heterogeneous phantoms. For complex clinical head and neck (HN) cases, the VSM-based MC simulation of DQA plans agreed with the film measurement with 98% of planar dose pixels passing on the 2%/2 mm gamma criteria. For patient treatment plans, results showed comparable dose-volume histograms (DVHs) for planning target volumes (PTVs) and organs at risk (OARs). Deviations observed in this study were consistent

PSFGAN: a generative adversarial network system for separating quasar point sources and host galaxy light

Science.gov (United States)

Stark, Dominic; Launet, Barthelemy; Schawinski, Kevin; Zhang, Ce; Koss, Michael; Turp, M. Dennis; Sartori, Lia F.; Zhang, Hantian; Chen, Yiru; Weigel, Anna K.

2018-06-01

The study of unobscured active galactic nuclei (AGN) and quasars depends on the reliable decomposition of the light from the AGN point source and the extended host galaxy light. The problem is typically approached using parametric fitting routines using separate models for the host galaxy and the point spread function (PSF). We present a new approach using a Generative Adversarial Network (GAN) trained on galaxy images. We test the method using Sloan Digital Sky Survey r-band images with artificial AGN point sources added that are then removed using the GAN and with parametric methods using GALFIT. When the AGN point source is more than twice as bright as the host galaxy, we find that our method, PSFGAN, can recover point source and host galaxy magnitudes with smaller systematic error and a lower average scatter (49 per cent). PSFGAN is more tolerant to poor knowledge of the PSF than parametric methods. Our tests show that PSFGAN is robust against a broadening in the PSF width of ± 50 per cent if it is trained on multiple PSFs. We demonstrate that while a matched training set does improve performance, we can still subtract point sources using a PSFGAN trained on non-astronomical images. While initial training is computationally expensive, evaluating PSFGAN on data is more than 40 times faster than GALFIT fitting two components. Finally, PSFGAN is more robust and easy to use than parametric methods as it requires no input parameters.

An integrated gait rehabilitation training based on Functional Electrical Stimulation cycling and overground robotic exoskeleton in complete spinal cord injury patients: Preliminary results.

Science.gov (United States)

Mazzoleni, S; Battini, E; Rustici, A; Stampacchia, G

2017-07-01

The aim of this study is to investigate the effects of an integrated gait rehabilitation training based on Functional Electrical Stimulation (FES)-cycling and overground robotic exoskeleton in a group of seven complete spinal cord injury patients on spasticity and patient-robot interaction. They underwent a robot-assisted rehabilitation training based on two phases: n=20 sessions of FES-cycling followed by n= 20 sessions of robot-assisted gait training based on an overground robotic exoskeleton. The following clinical outcome measures were used: Modified Ashworth Scale (MAS), Numerical Rating Scale (NRS) on spasticity, Penn Spasm Frequency Scale (PSFS), Spinal Cord Independence Measure Scale (SCIM), NRS on pain and International Spinal Cord Injury Pain Data Set (ISCI). Clinical outcome measures were assessed before (T0) after (T1) the FES-cycling training and after (T2) the powered overground gait training. The ability to walk when using exoskeleton was assessed by means of 10 Meter Walk Test (10MWT), 6 Minute Walk Test (6MWT), Timed Up and Go test (TUG), standing time, walking time and number of steps. Statistically significant changes were found on the MAS score, NRS-spasticity, 6MWT, TUG, standing time and number of steps. The preliminary results of this study show that an integrated gait rehabilitation training based on FES-cycling and overground robotic exoskeleton in complete SCI patients can provide a significant reduction of spasticity and improvements in terms of patient-robot interaction.

Improving employee productivity through improved health.

Science.gov (United States)

Mitchell, Rebecca J; Ozminkowski, Ronald J; Serxner, Seth

2013-10-01

The objective of this study was to estimate productivity-related savings associated with employee participation in health promotion programs. Propensity score weighting and multiple regression techniques were used to estimate savings. These techniques were adjusted for demographic and health status differences between participants who engaged in one or more telephonic health management programs and nonparticipants who were eligible for but did not engage in these programs. Employees who participated in a program and successfully improved their health care or lifestyle showed significant improvements in lost work time. These employees saved an average of $353 per person per year. This reflects about 10.3 hours in additional productive time annually, compared with similar, but nonparticipating employees. Participating in health promotion programs can help improve productivity levels among employees and save money for their employers.

Team resource management trainer's manual for the atomic vapor laser isotope separation program

International Nuclear Information System (INIS)

Bennett, T.

1998-01-01

High reliability organizations do exist. They have been defined as those organizations that conduct thousands of high-consequence operations a year, essentially error-free. Naval air carriers, air traffic control, and commercial aviation are some of these kinds of organizations. How did they get that way? What kinds of people staff them? Can we become a high reliability organization? This workshop will look at these questions. When we are done, it will be up to you to determine whether we have the right stuff. There are six goals for this workshop: Describe Team Resource Management and its purpose; Describe Performance Shaping Factors (PSFs) and their role in predicting and managing team performance and errors; Describe the principles for managing human error; Describe TRMs 12 rules-of-thumb (the Dirty Dozen) and use of safety nets; Conduct Operational Risk Management (ORM); Demonstrate ways to keep TRM working

Improving care at cystic fibrosis centers through quality improvement.

Science.gov (United States)

Kraynack, Nathan C; McBride, John T

2009-10-01

Quality improvement (QI) using a clinical microsystems approach provides cystic fibrosis (CF) centers the opportunity to make a significant positive impact on the health of their patients. The availability of center-specific outcomes data and the support of the Cystic Fibrosis Foundation are important advantages for these quality improvement efforts. This article illustrates how the clinical microsystems methodology can improve care delivery and outcomes by describing the gradual application of quality improvement principles over the past 5 years by the CF team at the Lewis Walker Cystic Fibrosis Center at Akron Children's Hospital in Akron, Ohio. Using the example of a project to improve the pulmonary function of the pediatric patients at our center as a framework, we describe the QI process from the initial team-building phase, through the assessment of care processes, standardization of care, and developing a culture of continuous improvement. We outline how enthusiastic commitment from physician leadership, clinical managers and central administration, the availability of coaches, and an appreciation of the importance of measurement, patient involvement, communication, and standardization are critical components for successful process improvement. Copyright Thieme Medical Publishers.

Collaborative quality improvement.

Science.gov (United States)

Luckenbaugh, Amy N; Miller, David C; Ghani, Khurshid R

2017-07-01

Quality improvement collaboratives were developed in many medical and surgical disciplines with the goal of measuring and improving the quality of care provided to patients. The aim of this review is to provide an overview of surgical quality improvement collaboratives, and in particular those aimed at improving urological care. Quality improvement collaboratives collect high-quality data using standardized methodologies, and use the data to provide feedback to physicians and practices, and then implement processes to improve patient outcomes. The largest regional collaborative in urology is the Michigan Urological Surgery Improvement Collaborative (MUSIC). Recent efforts by this group have been focused at understanding variation in care, improving patient selection for treatment, reducing treatment morbidity and measuring and optimizing technical skill. The American Urological Association has also recently launched a national quality registry (AQUA), with an initial focus on prostate cancer care. By understanding factors that result in exemplary performance, quality improvement collaboratives are able to develop best practices around areas of care with high variation that have the potential to improve outcomes and reduce costs. These developments have been made possible by the unique model offered by the collaborative structure with the goal of improving patient care at a population level.

Improved core monitoring for improved plant operations

International Nuclear Information System (INIS)

Mueller, N.P.

1987-01-01

Westinghouse has recently installed a core on-line surveillance, monitoring and operations systems (COSMOS), which uses only currently available core and plant data to accurately reconstruct the core average axial and radial power distributions. This information is provided to the operator in an immediately usable, human-engineered format and is accumulated for use in application programs that provide improved core performance predictive tools and a data base for improved fuel management. Dynamic on-line real-time axial and radial core monitoring supports a variety of plant operations to provide a favorable cost/benefit ratio for such a system. Benefits include: (1) relaxation or elimination of certain technical specifications to reduce surveillance and reporting requirements and allow higher availability factors, (2) improved information displays, predictive tools, and control strategies to support more efficient core control and reduce effluent production, and (3) expanded burnup data base for improved fuel management. Such systems can be backfit into operating plants without changing the existing instrumentation and control system and can frequently be implemented on existing plant computer capacity

Collaborative Improvement

DEFF Research Database (Denmark)

Kaltoft, Rasmus

The thesis data have been collected in the EU-sponsored project: Collaborative Improvement Tool for the Extended Manufacturing Enterprise, CO-IMPROVE. In this project four universities (Denmark, Ireland, Italy, and The Netherlands), two software vendors (Greece and Sweden) and three companies...... (Denmark, Italy and The Netherlands) each with three to five suppliers were involved. The CO-IMPROVE project and the thesis is based on “action research” and “action learning”. The main aim of the whole project is through actual involvement and actions make the researchers, companies and selected suppliers...... learn how to improve operations in (hopefully) a win-win like manner through collaboration....

Optimization Of The Efficiency Of A Pre And Post Apodized Piaa Coronagraph Using A Numerical Propagator.

Science.gov (United States)

Carlotti, Alexis; Pueyo, L.; Kasdin, N. J.

2011-01-01

Using a numerical propagator based on the Huygens integral, we study the apodization profiles (and PSFs) provided by a set of two PIAA mirrors that follow a square geometry. This choice is made as deformable mirrors could potentially be used as pupil mappers. A pre-apodizer and a post-apodizer are needed to improve the contrast and relax the manufacturing constraints of the mirrors. The stroke, minimum radius of curvature and diameter of the mirrors altogether with the parameters that define the pre and post apodizers’ properties are connected to the performances of the coronagraph in term of contrast, throughput and inner working angle. Characterizing these relations allows us to invert some of them. For example, we are able to set a specific value for the final throughput and to find out, for a particular mirror's diameter and stroke, the distance between the mirrors as well as the characteristics of the pre and post apodizers that need to be used. Contrast maps are given as functions of the stroke, the diameter, the radius of curvature and the throughput. All these numerical tools help us to understand the trade-offs that exist behind the design of a PIAA system. There is a direct relation between the diameter, stroke, maximum radius of curvature of the mirrors and the strength of the post-apodizer. Increasing the diameter improves the contrast but asks for a higher stroke and bigger distance. For a given set of mirrors, a better contrast can then be obtained by strengthening the pre and post apodizers at the expense of the throughput and the inner working angle. The post-apodizer could either be a transmittive, continuous apodizer or a binary apodizer. The latter case is explored and optimized binary apodizers are found for several PIAA cases. This work is supported by a NASA APRA grant.

Improving Project Portfolio Management (PPM) for Improvement Projects

DEFF Research Database (Denmark)

Pries-Heje, Jan; Jakobsen, Peter M.; Korsaa, Morten

2017-01-01

Project Portfolio Management (PPM) focus on the integration and alignment of projects with the business operation in order to achieve most value and cost-efficiency for the investment in projects. PPM is often a challenge and especially so for improvement projects where PPM is considerably...... of evaluating a portfolio of improvement projects and combine this evaluation with the effect they have on the CMMI maturity level. Further, the paper demonstrates how the combination of a strong senior management requirement for improved maturity and the focus on getting the most value out of PPM made...

From continuous improvement to collaborative improvement: scope, scale, skill and social networking in collaborative improvement

NARCIS (Netherlands)

Middel, H.G.A.; Groen, Arend J.; Fisscher, O.A.M.

2004-01-01

More than ever, companies are challenged to improve their performance and respond quickly and accurately to changes within the market. As competitive battlefield is moving towards the level of networks of organisations, the individual firm is an inadequate entity for identifying improvements.

Deconvolving the Nucleus of Centaurus A Using Chandra PSF Library

Science.gov (United States)

Karovska, Margarita

2000-01-01

Centaurus A (NGC 5128) is a giant early-type galaxy containing the nearest (at 3.5 Mpc) radio-bright Active Galactic Nucleus (AGN). Cen A was observed with the High Resolution Camera (HRC) on the Chandra X-ray Observatory on several occasions since the launch in July 1999. The high-angular resolution (less than 0.5 arcsecond) Chandra/HRC images reveal X ray multi-scale structures in this object with unprecedented detail and clarity, including the bright nucleus believed to be associated with a supermassive black hole. We explored the spatial extent of the Cen A nucleus using deconvolution techniques on the full resolution Chandra images. Model point spread functions (PSFs) were derived from the standard Chandra raytrace PSF library as well as unresolved point sources observed with Chandra. The deconvolved images show that the Cen A nucleus is resolved and asymmetric. We discuss several possible causes of this extended emission and of the asymmetries.

Is the Partner the Don Quixote of the 21st Century Corporate World?

DEFF Research Database (Denmark)

Bévort, Frans; Poulfelt, Flemming

2015-01-01

A large and growing proportion of the organizations in the contemporary knowledge economy are organized as professional partnerships as is the case of professional service firms (PSFs). As these firms have grown larger (e. g. Big4: Deloitte, PwC, E&Y, KPMG), the way of organizing is under pressure...... for change. This raises the question of whether the Partner ownership and management model is a relic of the past - and the partner a Don Quixote-figure of the 21st century corporate world? Based on an ethnographic study of a PSF in Denmark, and data from other sources, the paper analyzes the changing...... organization of work, the changing partner and manager roles and basic changes in the HR-model. The dilemma the paper highlights is the tension between a still more centralized and efficiency oriented management and the basic need for development of professional human resources and leadership. The paper sees...

Psychological biases affecting human cognitive performance in dynamic operational environments

International Nuclear Information System (INIS)

Takano, Kenichi; Reason, J.

1999-01-01

In order to identify cognitive error mechanisms observed in the dynamic operational environment, the following materials were analyzed giving special attention to psychological biases, together with possible cognitive tasks and these location, and internal and external performance shaping factors: (a) 13 human factors analyses of US nuclear power plant accidents, (b) 14 cases of Japanese nuclear power plant incidents, and (c) 23 cases collected in simulator experiments. In the resulting analysis, the most frequently identified cognitive process associated with error productions was situation assessment, and following varieties were KB processes and response planning, all of that were the higher cognitive activities. Over 70% of human error cases, psychological bias was affecting to cognitive errors, especially those to higher cognitive activities. In addition, several error occurrence patterns, including relations between cognitive process, biases, and PSFs were identified by the multivariate analysis. According to the identified error patterns, functions that an operator support system have to equip were discussed and specified for design base considerations. (author)

Integrating empowerment evaluation and quality improvement to achieve healthcare improvement outcomes

Science.gov (United States)

Wandersman, Abraham; Alia, Kassandra Ann; Cook, Brittany; Ramaswamy, Rohit

2015-01-01

While the body of evidence-based healthcare interventions grows, the ability of health systems to deliver these interventions effectively and efficiently lags behind. Quality improvement approaches, such as the model for improvement, have demonstrated some success in healthcare but their impact has been lessened by implementation challenges. To help address these challenges, we describe the empowerment evaluation approach that has been developed by programme evaluators and a method for its application (Getting To Outcomes (GTO)). We then describe how GTO can be used to implement healthcare interventions. An illustrative healthcare quality improvement example that compares the model for improvement and the GTO method for reducing hospital admissions through improved diabetes care is described. We conclude with suggestions for integrating GTO and the model for improvement. PMID:26178332

Improve strategic supplier performance using DMAIC to develop a Quality Improvement Plan

Science.gov (United States)

Jardim, Kevin P.

Supplier performance that meets the requirements of the customer has long plagued quality professionals. Despite the vast efforts by organizations to improve supplier performance, little has been done to standardize the plan to improve performance. This project presents a guideline and problem-solving strategy using a Define, Measure, Analyze, Improve, and Control (DMAIC) structured tool that will assist in the management and improvement of supplier performance. An analysis of benchmarked Quality Improvement Plans indicated that this topic needs more focus on how to accomplish improved supplier performance. This project is part of a growing body of supplier continuous improvement efforts. With the input of Zodiac Aerospace quality professionals this project's results provide a solution to Quality Improvement Plans and show objective evidence of its benefits. This project contributes to the future research on similar topics.

Continuous improvement in teams : The (mis)fit between improvement and operational activities of improvement teams

NARCIS (Netherlands)

Ros, D.J.

1999-01-01

Since the 1970s and 1980s, increasing attention has been paid to the Japanese ways of organising production. One of the subjects often discussed is the importance of continuous incremental improvements. Nowadays, for many organisations, continuous improvement has become an important topic; many

Collaborative Improvement

DEFF Research Database (Denmark)

Kaltoft, Rasmus

-organisational continuous improvement of their performance, relative to that of other EMEs. Developing a collaborative improvement relationship between companies is a protracted and complex process and, according to some surveys, the failure rate is as low as one to three. This failure rate is affected by a whole range...... of factors. The research presented in this thesis was aimed at identifying these factors and investigating their interplay and influence on the progress and success of the development of the collaborative improvement. This thesis presents our findings regarding the factors found, their interplay...

Posouzení metody stanovení průtoku jímáním kapaliny do odměrné nebo vážicí nádoby

OpenAIRE

Valdová, Klára

2016-01-01

Tato diplomová práce se zabývá posouzením dvou metod měření průtoku používaných v oblasti úředního měření v profilech s volnou hladinou. A to metodou jímání kapaliny do odměrné nádoby a metodou jímání kapaliny do vážicí nádoby (vaku). Hlavním cílem práce bylo v rámci řešení Plánu rozvoje metrologie ÚNMZ zpřesnění nejistot určených způsobem A a B pro tyto dvě metody měření průtoku, protože v dřívější době byly tyto nejistoty stanoveny dle starších metodik a s etalony průtoku s nižší přesností....

Low emissions system featured on compressor drive

International Nuclear Information System (INIS)

Curtis, T.

1995-01-01

A high speed power turbine is offered as an option with direct drive capability for pipeline compressors and other high-speed applications. As developed, it features ease of maintenance with rotor and nozzle assembly in a single cartridge to allow quick change-out or replacement of parts on site. The new compressor drive builds extensively on proven technology and is expected to provide lower installed and life-cycle costs per unit horsepower than previous units. During its development stages, M ampersand IE preformed cost and risk assessment of several design configurations and concluded that a derivative approach based on the standard unit was an optimal solution in the 39,000 shp range. A two-shaft gas turbine is expected to be applied in the industrial and commercial marine markets, including 50- and 60-Hertz power generation applications, pipeline compression, gas injection, and fast ferry commercial marine uses. Emissions controls for the system will include water or steam injection using a standard combustor or M and IE's DLE combustion system

Belt conveyor

OpenAIRE

Hoferek, Tomáš

2016-01-01

Tato bakalářská práce se zabývá problematikou pásového dopravníku pro přepravu suchého písku. Cílem práce je provést konstrukční řešení pásového dopravníku podle zadaných parametrů, kterými jsou dopravní výkon 100 000 kg.h-1, výškový rozdíl 5 m a vzdálenost mezi osami bubnů 40 m. Práce obsahuje krátký popis pásového dopravníku a jeho hlavních částí, funkční výpočet dle platné normy ČSN ISO 5048 a volbu jednotlivých komponentů z firemních katalogů. Dále také návrh napínacího zařízení, návrh po...

Návrhové systémy používané v oblasti elektrických přístrojů

OpenAIRE

Stejskal, Jiří

2008-01-01

Bakalářská práce je vypracována na základě požadavků zadavatele firmy OEZ, s.r.o. a je rozdělena na dvě části. První část práce se zabývá nejčastěji používanými 2D CAD systémy, které používají konstruktéři, dle svých odpovědí v oblasti návrhu elektrických rozvaděčů nn. V práci jsou popsány hlavní možnosti těchto systémů, dále pak jaké datové formáty jsou jimi podporovány. V druhé části práce jsou popsány programy určené k výpočtu oteplení rozváděčů. Jedná se jednak o programy, které dodává ko...

APROXIMACIÓN A LA REPRESENTACIÓN DEL SIGNIFICADO LÉXICO DE LA ENTIDAD LÉXICA ‘TAREA ESCOLAR’

Directory of Open Access Journals (Sweden)

Jaime Ruiz Vega

2016-01-01

Full Text Available Este artículo presenta parte de los resultados obtenidos en el desarrollo del proyecto l a movilización discursiva de valores sociales asociados a la entidad léxica tarea escolar en la educación básica y media en Bogotá ( dle –361–13, que tuvo como objetivo identificar y analizar las concepciones que de las tareas escolares tienen los docentes de educación básica y media de Bogotá. Se da cuenta de aspectos conceptuales que sustentan la investigación y de la metodología que orientó el trabajo, la cual se sustenta en los planteamientos de la Semántica de los Posibles Argumentativos ( spa ; luego, se ofrece el análisis de los datos obtenidos de la entidad léxica ‘tarea escolar’ , fundamentalmente en lo que respecta a los encadenamientos argumentativos y la movilización discursiva de valores asociados al núcleo y los estereotipos de dicha entidad léxica.

Popis osobnosti pachatele trestného činu vloupání dle Cloningerova dotazníku temperamentu a charakteru

Czech Academy of Sciences Publication Activity Database

Polišenská, Veronika

2009-01-01

Roč. 53, č. 6 (2009), s. 545-555 ISSN 0009-062X R&D Projects: GA ČR GA406/07/0261 Institutional research plan: CEZ:AV0Z70250504 Keywords : personality * Cloninger * burglary Subject RIV: AN - Psychology Impact factor: 0.226, year: 2009

Improvement Science Meets Improvement Scholarship: Reframing Research for Better Healthcare.

Science.gov (United States)

Cribb, Alan

2018-06-01

In this editorial essay I explore the possibilities of 'improvement scholarship' in order to set the scene for the theme of, and the other papers in, this issue. I contrast a narrow conception of quality improvement (QI) research with a much broader and more inclusive conception, arguing that we should greatly extend the existing dialogue between 'problem-solving' and 'critical' currents in improvement research. I have in mind the potential for building a much larger conversation between those people in 'improvement science' who are expressly concerned with tackling the problems facing healthcare and the wider group of colleagues who are engaged in health-related scholarship but who do not see themselves as particularly interested in quality improvement, indeed who may be critical of the language or concerns of QI. As one contribution to that conversation I suggest that that the increasing emphasis on theory and rigour in improvement research should include more focus on normative theory and rigour. The remaining papers in the issue are introduced including the various ways in which they handle the 'implicit normativity' of QI research and practice, and the linked theme of combining relatively 'tidy' and potentially 'unruly' forms of knowledge.

Continual improvement plan

Science.gov (United States)

1994-01-01

NASA's approach to continual improvement (CI) is a systems-oriented, agency-wide approach that builds on the past accomplishments of NASA Headquarters and its field installations and helps achieve NASA's vision, mission, and values. The NASA of the future will fully use the principles of continual improvement in every aspect of its operations. This NASA CI plan defines a systematic approach and a model for continual improvement throughout NASA, stressing systems integration and optimization. It demonstrates NASA's constancy of purpose for improvement - a consistent vision of NASA as a worldwide leader in top-quality science, technology, and management practices. The CI plan provides the rationale, structures, methods, and steps, and it defines NASA's short term (1-year) objectives for improvement. The CI plan presents the deployment strategies necessary for cascading the goals and objectives throughout the agency. It also provides guidance on implementing continual improvement with participation from top leadership and all levels of employees.

Applications of process improvement techniques to improve workflow in abdominal imaging.

Science.gov (United States)

Tamm, Eric Peter

2016-03-01

Major changes in the management and funding of healthcare are underway that will markedly change the way radiology studies will be reimbursed. The result will be the need to deliver radiology services in a highly efficient manner while maintaining quality. The science of process improvement provides a practical approach to improve the processes utilized in radiology. This article will address in a step-by-step manner how to implement process improvement techniques to improve workflow in abdominal imaging.

Effects of a community-based approach of food and psychosocial stimulation on growth and development of severely malnourished children in Bangladesh: a randomised trial.

Science.gov (United States)

Nahar, B; Hossain, M I; Hamadani, J D; Ahmed, T; Huda, S N; Grantham-McGregor, S M; Persson, L A

2012-06-01

Psychosocial stimulation (PS) and food supplementation (FS) improve development of malnourished children. This study evaluates the effects of a community-based approach of PS and FS on growth and development of severely malnourished children. Severely underweight hospitalised children aged 6-24 months (n = 507) were randomly allocated on discharge to five groups: (i) PS, (ii) FS, (iii) PS+FS, (iv) clinic-control and (v) hospital-control. PS included play sessions and parental counselling on child development. This was done at each fortnightly follow-up visit, that is, every second week, for 6 months at community clinics. FS included distribution of cereal-based food packets (150-300 kcal/day) for 3 months. All groups received medical care, micronutrient supplementation, health-education and growth monitoring. Children's development was assessed using revised version of Bayley Scales of Infant Development at baseline and after 3 and 6 months of intervention. Anthropometry was measured using standard procedure. Comparing groups with any stimulation with those with no stimulation there was a significant effect of stimulation on children's mental development index (group*session interaction P = 0.037, effect size = 0.37 s.d.) and weight-for-age Z-score (group*session interaction P = 0.02, effect size=0.26 s.d.). Poor levels of development and nutritional status were sustained, however, due to their initial very severe malnutrition. There was no effect on motor development and linear growth. Children receiving any stimulation showed a significant benefit to mental development and growth in weight. More intensive intervention with longer duration is needed to correct their poor developmental levels and nutritional status.

Integrating empowerment evaluation and quality improvement to achieve healthcare improvement outcomes.

Science.gov (United States)

Wandersman, Abraham; Alia, Kassandra Ann; Cook, Brittany; Ramaswamy, Rohit

2015-10-01

While the body of evidence-based healthcare interventions grows, the ability of health systems to deliver these interventions effectively and efficiently lags behind. Quality improvement approaches, such as the model for improvement, have demonstrated some success in healthcare but their impact has been lessened by implementation challenges. To help address these challenges, we describe the empowerment evaluation approach that has been developed by programme evaluators and a method for its application (Getting To Outcomes (GTO)). We then describe how GTO can be used to implement healthcare interventions. An illustrative healthcare quality improvement example that compares the model for improvement and the GTO method for reducing hospital admissions through improved diabetes care is described. We conclude with suggestions for integrating GTO and the model for improvement. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Effect of pH on the structural, optical and morphological properties of Ga-doped ZnO nanoparticles by reflux precipitation method

Science.gov (United States)

Ungula, J.; Dejene, B. F.; Swart, H. C.

2018-04-01

Gallium-doped zinc oxide nanoparticles (GZO NPs) were synthesized by the reflux precipitation method at 1, 3, 5, 7 and 8 pH conditions of Ga/Zn precursor solution (Ga/Zn sol.). Analysis of X-ray diffraction (XRD) spectra showed that the diffraction peak intensities of GZO NPs increased and the crystallite sizes varied from 11 to 27 nm with an increase in the pH of the Zn/Ga sol. Scanning electron microscopy micrographs showed agglomerated tiny particles that formed on big slabs of nanorods at the lower pH, but fine and enlarged particles on nano-spherical bases formed at the higher pH values. The photoluminescence exciton peak intensities of the GZO NPs and their respective FWHM increased to a maximum at the 5 pH and then reduced slightly as the solution got more basic. The increase of the deep level peak intensities with the increase in the pH followed the XRD diffraction intensity results. It was observed that both the exciton and DLE peaks emission positions shifted to lower wavelengths up to the 5 pH and then red shifted for a further increase in the pH values. The UV-vis analysis also demonstrated that the optical properties of the GZO NPs improved with the increase Ga/Zn sol. pH, as shown by the blue shift of the absorption edge of the reflectance spectra. The band gap energy was tuned from 3.18 to 3.31 eV with the increase in the pH from 1 to 5. An additional increase in the pH yielded no significant change in the optical properties of the GZO NPs.

Teaching quality improvement.

Science.gov (United States)

Murray, Marry Ellen; Douglas, Stephen; Girdley, Diana; Jarzemsky, Paula

2010-08-01

Practicing nurses are required to engage in quality improvement work as a part of their clinical practice, but few undergraduate nursing education programs offer course work and applied experience in this area. This article presents a description of class content and teaching strategies, assignments, and evaluation strategies designed to achieve the Quality and Safety Education in Nursing competencies related to quality improvement and interdisciplinary teams. Students demonstrate their application of the quality improvement process by designing and implementing a small-scale quality improvement project that they report in storyboard format on a virtual conference Web site.

Improving a Dental School's Clinic Operations Using Lean Process Improvement.

Science.gov (United States)

Robinson, Fonda G; Cunningham, Larry L; Turner, Sharon P; Lindroth, John; Ray, Deborah; Khan, Talib; Yates, Audrey

2016-10-01

The term "lean production," also known as "Lean," describes a process of operations management pioneered at the Toyota Motor Company that contributed significantly to the success of the company. Although developed by Toyota, the Lean process has been implemented at many other organizations, including those in health care, and should be considered by dental schools in evaluating their clinical operations. Lean combines engineering principles with operations management and improvement tools to optimize business and operating processes. One of the core concepts is relentless elimination of waste (non-value-added components of a process). Another key concept is utilization of individuals closest to the actual work to analyze and improve the process. When the medical center of the University of Kentucky adopted the Lean process for improving clinical operations, members of the College of Dentistry trained in the process applied the techniques to improve inefficient operations at the Walk-In Dental Clinic. The purpose of this project was to reduce patients' average in-the-door-to-out-the-door time from over four hours to three hours within 90 days. Achievement of this goal was realized by streamlining patient flow and strategically relocating key phases of the process. This initiative resulted in patient benefits such as shortening average in-the-door-to-out-the-door time by over an hour, improving satisfaction by 21%, and reducing negative comments by 24%, as well as providing opportunity to implement the electronic health record, improving teamwork, and enhancing educational experiences for students. These benefits were achieved while maintaining high-quality patient care with zero adverse outcomes during and two years following the process improvement project.

A Simulation-Based Quality Improvement Initiative Improves Pediatric Readiness in Community Hospitals.

Science.gov (United States)

Whitfill, Travis; Gawel, Marcie; Auerbach, Marc

2017-07-17

The National Pediatric Readiness Project Pediatric Readiness Survey (PRS) measured pediatric readiness in 4149 US emergency departments (EDs) and noted an average score of 69 on a 100-point scale. This readiness score consists of 6 domains: coordination of pediatric patient care (19/100), physician/nurse staffing and training (10/100), quality improvement activities (7/100), patient safety initiatives (14/100), policies and procedures (17/100), and availability of pediatric equipment (33/100). We aimed to assess and improve pediatric emergency readiness scores across Connecticut's hospitals. The aim of this study was to compare the National Pediatric Readiness Project readiness score before and after an in situ simulation-based assessment and quality improvement program in Connecticut hospitals. We leveraged in situ simulations to measure the quality of resuscitative care provided by interprofessional teams to 3 simulated patients (infant septic shock, infant seizure, and child cardiac arrest) presenting to their ED resuscitation bay. Assessments of EDs were made based on a composite quality score that was measured as the sum of 4 distinct domains: (1) adherence to sepsis guidelines, (2) adherence to cardiac arrest guidelines, (3) performance on seizure resuscitation, and (4) teamwork. After the simulation, a detailed report with scores, comparisons to other EDs, and a gap analysis were provided to sites. Based on this report, a regional children's hospital team worked collaboratively with each ED to develop action items and a timeline for improvements. The National Pediatric Readiness Project PRS scores, the primary outcome of this study, were measured before and after participation. Twelve community EDs in Connecticut participated in this project. The PRS scores were assessed before and after the intervention (simulation-based assessment and gap analysis/report-out). The average time between PRS assessments was 21 months. The PRS scores significantly improved 12

76 FR 41246 - Pesticide Program Dialogue Committee, Pesticide Registration Improvement Act Process Improvement...

Science.gov (United States)

2011-07-13

... Committee, Pesticide Registration Improvement Act Process Improvement Workgroup; Notice of Public Meeting...) Process Improvement Work Group. EPA plans to meet its ESA consultation obligations through the pesticide... a pesticide during the registration review process. This meeting of the PRIA Process Improvement...

Performance Shaping Factors Assessments and Application to PHWR Outages

Energy Technology Data Exchange (ETDEWEB)

Lee, Seung Woo

2007-02-15

Human reliability analysis is definitely related to the quality of PSA because human errors have been identified as major contributors to PSA. According to NRC's 'Office of analysis and evaluation of operational data (AEOD)',82% of the reactor trips and accident during outage is caused by the events related to human errors. There is, however, no one HRA method universally accepted. Furthermore, HRA during PHWR outages has not been performed around the world yet. HRA during PHWR outages is especially important since manual management of operator is more required during PHWR. In this study, accident scenarios which HYU developed are used to perform a quantification of human error probability. In this study, overall procedures of standard HRA methodology are introduced and follows the quantification of 10 possible selected human actions during PHWR outages based on standard HRA methodology. To see the verification, quantified values were compared with the values from 'Generic CANDU Probabilistic Safety Assessment' and the values estimated by ASEP.Core Damage Frequency was estimated 3.35 x 10{sup -4} more higher than CDF estimated by AECL data. It was considered that the differences between the HEPs for OPAFW and OPECC3 make CDF higher. Therefore, complementary study of reestimating HEP for OPAFW and OPECC3 in detail is required for increasing the qualities of HRA and PSA. Moreover, one of the difficulties in performing human reliability analysis is to evaluate performance shaping factors which represent the characteristics and circumstances. For assessing a specific human action more exactly, it is necessary to consider all of the PSFs at the same time which makes an effect on the human action. Also, it requires the effect comparison among PSFs to minimize the uncertainties which are usually caused by the subjective judgements of HRA analysts. To see the sensitivity, performance shaping factors of each decision rule are changed which resulted

Performance Shaping Factors Assessments and Application to PHWR Outages

International Nuclear Information System (INIS)

Lee, Seung Woo

2007-02-01

Human reliability analysis is definitely related to the quality of PSA because human errors have been identified as major contributors to PSA. According to NRC's 'Office of analysis and evaluation of operational data (AEOD)',82% of the reactor trips and accident during outage is caused by the events related to human errors. There is, however, no one HRA method universally accepted. Furthermore, HRA during PHWR outages has not been performed around the world yet. HRA during PHWR outages is especially important since manual management of operator is more required during PHWR. In this study, accident scenarios which HYU developed are used to perform a quantification of human error probability. In this study, overall procedures of standard HRA methodology are introduced and follows the quantification of 10 possible selected human actions during PHWR outages based on standard HRA methodology. To see the verification, quantified values were compared with the values from 'Generic CANDU Probabilistic Safety Assessment' and the values estimated by ASEP.Core Damage Frequency was estimated 3.35 x 10 -4 more higher than CDF estimated by AECL data. It was considered that the differences between the HEPs for OPAFW and OPECC3 make CDF higher. Therefore, complementary study of reestimating HEP for OPAFW and OPECC3 in detail is required for increasing the qualities of HRA and PSA. Moreover, one of the difficulties in performing human reliability analysis is to evaluate performance shaping factors which represent the characteristics and circumstances. For assessing a specific human action more exactly, it is necessary to consider all of the PSFs at the same time which makes an effect on the human action. Also, it requires the effect comparison among PSFs to minimize the uncertainties which are usually caused by the subjective judgements of HRA analysts. To see the sensitivity, performance shaping factors of each decision rule are changed which resulted in changes of core damage

Non-oblivious Strategy Improvement

Science.gov (United States)

Fearnley, John

We study strategy improvement algorithms for mean-payoff and parity games. We describe a structural property of these games, and we show that these structures can affect the behaviour of strategy improvement. We show how awareness of these structures can be used to accelerate strategy improvement algorithms. We call our algorithms non-oblivious because they remember properties of the game that they have discovered in previous iterations. We show that non-oblivious strategy improvement algorithms perform well on examples that are known to be hard for oblivious strategy improvement. Hence, we argue that previous strategy improvement algorithms fail because they ignore the structural properties of the game that they are solving.

Making process improvement 'stick'.

Science.gov (United States)

Studer, Quint

2014-06-01

To sustain gains from a process improvement initiative, healthcare organizations should: Explain to staff why a process improvement initiative is needed. Encourage leaders within the organization to champion the process improvement, and tie their evaluations to its outcomes. Ensure that both leaders and employees have the skills to help sustain the sought-after process improvements.

Experimental Study on Durability Improvement of Fly Ash Concrete with Durability Improving Admixture

OpenAIRE

Quan, Hong-zhu; Kasami, Hideo

2014-01-01

In order to improve the durability of fly ash concrete, a series of experimental studies are carried out, where durability improving admixture is used to reduce drying shrinkage and improve freezing-thawing resistance. The effects of durability improving admixture, air content, water-binder ratio, and fly ash replacement ratio on the performance of fly ash concrete are discussed in this paper. The results show that by using durability improving admixture in nonair-entraining fly ash concrete,...

CDBG Public Improvements Activity

Data.gov (United States)

Department of Housing and Urban Development — CDBG activity related to public improvements, including senior centers, youth centers, parks, street improvements, water/sewer improvements, child care centers, fire...

Process Improvement Essentials

CERN Document Server

Persse, James R

2006-01-01

Process Improvement Essentials combines the foundation needed to understand process improvement theory with the best practices to help individuals implement process improvement initiatives in their organization. The three leading programs: ISO 9001:2000, CMMI, and Six Sigma--amidst the buzz and hype--tend to get lumped together under a common label. This book delivers a combined guide to all three programs, compares their applicability, and then sets the foundation for further exploration.

Improving fleet performance

International Nuclear Information System (INIS)

Ramjist, S.

2015-01-01

Use Fleet Initiatives to Improve Overall Fleet Performance . Tightly Integrated with Business Planning (Cause & Effect) . Leverage Strength of Broader Organization - Converge on Standard Business Practices . Ancillary Benefit of Improved Agility.

Improving fleet performance

Energy Technology Data Exchange (ETDEWEB)

Ramjist, S. [Ontario Power Generation, Toronto, ON (Canada)

2015-07-01

Use Fleet Initiatives to Improve Overall Fleet Performance . Tightly Integrated with Business Planning (Cause & Effect) . Leverage Strength of Broader Organization - Converge on Standard Business Practices . Ancillary Benefit of Improved Agility.

A cluster-randomised quality improvement study to improve two inpatient stroke quality indicators.

Science.gov (United States)

Williams, Linda; Daggett, Virginia; Slaven, James E; Yu, Zhangsheng; Sager, Danielle; Myers, Jennifer; Plue, Laurie; Woodward-Hagg, Heather; Damush, Teresa M

2016-04-01

Quality indicator collection and feedback improves stroke care. We sought to determine whether quality improvement training plus indicator feedback was more effective than indicator feedback alone in improving inpatient stroke indicators. We conducted a cluster-randomised quality improvement trial, randomising hospitals to quality improvement training plus indicator feedback versus indicator feedback alone to improve deep vein thrombosis (DVT) prophylaxis and dysphagia screening. Intervention sites received collaborative-based quality improvement training, external facilitation and indicator feedback. Control sites received only indicator feedback. We compared indicators pre-implementation (pre-I) to active implementation (active-I) and post-implementation (post-I) periods. We constructed mixed-effect logistic models of the two indicators with a random intercept for hospital effect, adjusting for patient, time, intervention and hospital variables. Patients at intervention sites (1147 admissions), had similar race, gender and National Institutes of Health Stroke Scale scores to control sites (1017 admissions). DVT prophylaxis improved more in intervention sites during active-I period (ratio of ORs 4.90, pimproved similarly in both groups during active-I, but control sites improved more in post-I period (ratio of ORs 0.67, p=0.04). In logistic models, the intervention was independently positively associated with DVT performance during active-I period, and negatively associated with dysphagia performance post-I period. Quality improvement training was associated with early DVT improvement, but the effect was not sustained over time and was not seen with dysphagia screening. External quality improvement programmes may quickly boost performance but their effect may vary by indicator and may not sustain over time. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Experimental study on durability improvement of fly ash concrete with durability improving admixture.

Science.gov (United States)

Quan, Hong-zhu; Kasami, Hideo

2014-01-01

In order to improve the durability of fly ash concrete, a series of experimental studies are carried out, where durability improving admixture is used to reduce drying shrinkage and improve freezing-thawing resistance. The effects of durability improving admixture, air content, water-binder ratio, and fly ash replacement ratio on the performance of fly ash concrete are discussed in this paper. The results show that by using durability improving admixture in nonair-entraining fly ash concrete, the compressive strength of fly ash concrete can be improved by 10%-20%, and the drying shrinkage is reduced by 60%. Carbonation resistance of concrete is roughly proportional to water-cement ratio regardless of water-binder ratio and fly ash replacement ratio. For the specimens cured in air for 2 weeks, the freezing-thawing resistance is improved. In addition, by making use of durability improving admixture, it is easier to control the air content and make fly ash concrete into nonair-entraining one. The quality of fly ash concrete is thereby optimized.

The Work Compatibility Improvement Framework: theory and application of improvement action and intervention strategies.

Science.gov (United States)

Genaidy, Ash M; Rinder, Magda M; Sequeira, Reynold; A-Rehim, Amal D

2009-05-01

Challenges facing management of manufacturing firms can be transformed into asset gains by giving careful consideration to the worker-work environment interface. The benefits of a 'healthy' interface may lead to sizable reductions in rising health care costs and retention of highly qualified workers. This paper presents a novel approach for the 'improve' phase of the Work Compatibility Improvement Framework. The work tasks of this research consisted of: (a) fundamentals of cognitive-based improvement action and intervention; (b) design concepts and process of improvement action/intervention generation; (c) assessment model of estimated gains in company's assets; (d) application demonstration in the manufacturing sector. The process of improvement action/intervention generation is described, preceded by a description of the fundamentals of cognitive-based improvement action and intervention and system architecture. This is followed by a documentation of estimated asset gains as a result of the improvement plan. The results showed that expert workers were, on average, 78% in agreement with the algorithm-identified improvement actions. Their knowledge was used to update the recommended actions as well as to detail the multiple strategies required to address the improvement actions. As a result, an integrated improvement plan was developed resulting in estimated asset gains of $1.6 million, which was validated by the general manager. The research reported herein documented the theory and application of the 'improve' phase of the Work Compatibility Improvement Framework. The economic assessment of the suggested improvement is also reported and this has proved to be an important driver to secure the firm collaboration of manufacturing enterprise management. An integrated improvement solution plan backed by a detailed economic assessment of suggested improvements is essential to demonstrate the full potential of workplace micro- and macro-ergonomic interventions.

Improving Family Meetings in Intensive Care Units: A Quality Improvement Curriculum.

Science.gov (United States)

Gruenewald, David A; Gabriel, Michelle; Rizzo, Dorothy; Luhrs, Carol A

2017-07-01

Family meetings in the intensive care unit are associated with beneficial outcomes for patients, their families, and health care systems, yet these meetings often do not occur in a timely, effective, reliable way. The Department of Veterans Affairs Comprehensive End-of-Life Care Implementation Center sponsored a national initiative to improve family meetings in Veterans Affairs intensive care units across the United States. Process measures of success for the initiative were identified, including development of a curriculum to support facility-based quality improvement projects to implement high-quality family meetings. Identified curriculum requirements included suitability for distance learning and applicability to many clinical intensive care units. Curriculum modules were cross-mapped to the "Plan-Do-Study-Act" model to aid in planning quality improvement projects. A questionnaire was e-mailed to users to evaluate the curriculum's effectiveness. Users rated the curriculum's effectiveness in supporting and achieving aims of the initiative as 3.6 on a scale of 0 (not effective) to 4 (very effective). Users adapted the curriculum to meet local needs. The number of users increased from 6 to 17 quality improvement teams in 2 years. All but 3 teams progressed to implementation of an action plan. Users were satisfied with the effectiveness and adaptability of a family-meeting quality improvement curriculum to support implementation of a quality improvement project in Veterans Affairs intensive care units. This tool may be useful in facilitating projects to improve the quality of family meetings in other intensive care units. ©2017 American Association of Critical-Care Nurses.

Continuous Improvement in Education. Advancing Teaching--Improving Learning. White Paper

Science.gov (United States)

Park, Sandra; Hironaka, Stephanie; Carver, Penny; Nordstrum, Lee

2013-01-01

In recent years, "continuous improvement" has become a popular catchphrase in the field of education. However, while continuous improvement has become commonplace and well-documented in other industries, such as healthcare and manufacturing, little is known about how this work has manifested itself in education. This white paper attempts…

Implementing a customer focused continual business improvement program to improve the maintenance process

International Nuclear Information System (INIS)

Kharshafdjian, G.; Fisher, C.; Beres, T.; Brooks, S.; Forbes, S.; Krause, M.; McAuley, K.; Wendorf, M.

2006-01-01

Global market pressures and increasing competition demands that successful companies establish a continual business improvement program as part of implementing its business strategy. Such programs must be driven by the definition of quality from the customer's perspective. This customer quality focus often requires a change in all aspects of the business including products, services, processes and culture. This paper will describe how Atomic Energy of Canada Limited implemented a Continual Business Improvement Program in their Nuclear Laboratories Business Unit. In particular, to review how the techniques were applied to improve the maintenance process and the status of the project. Customer (internal users of the processes at CRL) feedback has shown repeatedly there is dissatisfaction of the maintenance process. Customers complain about jobs not getting done to schedule or being deferred. A project has been launched with the following goals: to improve the maintenance process customer satisfaction and increase trades wrench time by 30 minutes / trade / day. DMAIC (Define-Measure-Analyze-Improve-Control) methodology was applied to find out the Root Cause(s) of the problem, provide solutions, and implement improvements. The expected Operational Benefits include: Executing work efficiently to quality standards and business performance of the site, improve maintenance efficiencies, reduce cycle time for maintenance process and improve process yield, and improve customer and employee satisfaction. (author)

Implementing a customer focused continual business improvement program to improve the maintenance process

Energy Technology Data Exchange (ETDEWEB)

Kharshafdjian, G.; Fisher, C.; Beres, T.; Brooks, S.; Forbes, S.; Krause, M.; McAuley, K.; Wendorf, M. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada)

2006-07-01

Global market pressures and increasing competition demands that successful companies establish a continual business improvement program as part of implementing its business strategy. Such programs must be driven by the definition of quality from the customer's perspective. This customer quality focus often requires a change in all aspects of the business including products, services, processes and culture. This paper will describe how Atomic Energy of Canada Limited implemented a Continual Business Improvement Program in their Nuclear Laboratories Business Unit. In particular, to review how the techniques were applied to improve the maintenance process and the status of the project. Customer (internal users of the processes at CRL) feedback has shown repeatedly there is dissatisfaction of the maintenance process. Customers complain about jobs not getting done to schedule or being deferred. A project has been launched with the following goals: to improve the maintenance process customer satisfaction and increase trades wrench time by 30 minutes / trade / day. DMAIC (Define-Measure-Analyze-Improve-Control) methodology was applied to find out the Root Cause(s) of the problem, provide solutions, and implement improvements. The expected Operational Benefits include: Executing work efficiently to quality standards and business performance of the site, improve maintenance efficiencies, reduce cycle time for maintenance process and improve process yield, and improve customer and employee satisfaction. (author)

Non-oblivious Strategy Improvement

OpenAIRE

Fearnley, John

2010-01-01

We study strategy improvement algorithms for mean-payoff and parity games. We describe a structural property of these games, and we show that these structures can affect the behaviour of strategy improvement. We show how awareness of these structures can be used to accelerate strategy improvement algorithms. We call our algorithms non-oblivious because they remember properties of the game that they have discovered in previous iterations. We show that non-oblivious strategy improvement algorit...

Chirally improving Wilson fermions I. O(a) improvement

International Nuclear Information System (INIS)

Frezzotti, R.; Rossi, G.C.

2004-01-01

We show that it is possible to improve the chiral behaviour and the approach to the continuum limit of correlation functions in lattice QCD with Wilson fermions by taking arithmetic averages of correlators computed in theories regularized with Wilson terms of opposite sign. Improved hadronic masses and matrix elements can be obtained by similarly averaging the corresponding physical quantities separately computed within the two regularizations. To deal with the problems related to the spectrum of the Wilson-Dirac operator, which are particularly worrisome when Wilson and mass terms are such as to give contributions of opposite sign to the real part of the eigenvalues, we propose to use twisted-mass lattice QCD for the actual computation of the quantities taking part to the averages. The choice ±π/2 for the twisting angle is particularly interesting, as O(a) improved estimates of physical quantities can be obtained even without averaging data from lattice formulations with opposite Wilson terms. In all cases little or no extra computing power is necessary, compared to simulations with standard Wilson fermions or twisted-mass lattice QCD. (author)

Zachycení finančních aktiv v účetní závěrce dle IFRS

OpenAIRE

Shagatay, Samal

2010-01-01

The aim of this work is to review the issue of financial assets reporting in financial statements made in accordance with International Financial Reporting Standards. The objectives are in particular to explain the basic terms, to present the financial assets classification, valuation methods and their subsequent recognition in agreement with categories. In the end there are also described the requirements for disclosure in the financial statements. The benefit of the work is a detailed displ...

Maintenance improvement program

International Nuclear Information System (INIS)

Derbonne, D.R.; Plunkett, T.F.; Simpson, J.R.

1989-01-01

During fuel cycle 1 at River Bend station, considerable effort was expended to reduce corrective maintenance work orders (MWOs) to <1,000. This was done by complementing the plant staff with costly contract personnel. Coming out of the first refueling outage, most contract personnel were released. The change in MWO backlog started a steady rise. It became readily apparent that to avoid costly contract staff time, a maintenance improvement program (MIP) was necessary. The MIP Was primarily directed at two areas: crew efficiency improvements and improved preplanned MWO packages. The overall effect of the MIP was to achieve significant productivity improvements with reduced operation and maintenance cost by providing frequent accountability to all levels of maintenance supervision. The MIP also produced a feeling of pride among the maintenance department employees that had not really existed before. This was the best benefit of all

Improving Healthcare Logistics Processes

DEFF Research Database (Denmark)

Feibert, Diana Cordes

logistics processes in hospitals and aims to provide theoretically and empirically based evidence for improving these processes to both expand the knowledge base of healthcare logistics and provide a decision tool for hospital logistics managers to improve their processes. Case studies were conducted...... processes. Furthermore, a method for benchmarking healthcare logistics processes was developed. Finally, a theoretically and empirically founded framework was developed to support managers in making an informed decision on how to improve healthcare logistics processes. This study contributes to the limited...... literature concerned with the improvement of logistics processes in hospitals. Furthermore, the developed framework provides guidance for logistics managers in hospitals on how to improve their processes given the circumstances in which they operate....

Using Quality Improvement to Improve Internal and External Coordination and Referrals.

Science.gov (United States)

Cain, Katherine L; Collins, Ragan P

As part of accreditation, Public Health Accreditation Board site visitors recommended that the New Orleans Health Department strengthen its quality improvement program. With support from the Public Health Accreditation Board, the New Orleans Health Department subsequently embarked on a data-driven planning process through which it prioritized quality improvement projects for 2016. One of these projects aimed to improve referrals to New Orleans Health Department's direct services programs from local clinics and hospitals to better provide our most vulnerable residents with a continuum of care. After completing a cause-and-effect analysis, we implemented a solution involving increased outreach to health care institutions and saw annual participation increase in 3 out of 4 of our programs. We leveraged this work to successfully apply for funding to create a centralized referral system, which will facilitate partnerships among local health and human service agencies and improve access to services. This is one example of how accreditation has benefited our health department and our community. We have found that the accreditation process promotes a culture of quality and helps health departments identify and address areas for improvement.

Improving palliative care.

LENUS (Irish Health Repository)

Moran, Sue

2009-05-01

Any service improvement project requires planning, action and evaluation. Using a recognised quality improvement framework can offer a structured approach to implementing and assessing changes to patient care. This article describes how use of the Deming Cycle has helped to identify nurses\\' learning needs.

Room for improvement

DEFF Research Database (Denmark)

Sandal, Louise F; Thorlund, Jonas B; Moore, Andrew J

2018-01-01

-reported outcomes and qualitative findings supported the primary finding, while improvements in muscle strength and aerobic capacity did not differ between exercise groups. CONCLUSION: Results suggest that the physical environment contributes to treatment response. Matching patients' preferences to treatment rooms...... significance (p=0.07). Waitlist group reported no improvement (-0.05 95% CI -0.5 to 0.4). In interviews, participants from the standard environment expressed greater social cohesion and feeling at home. Qualitative themes identified; reflection, sense of fellowship and transition. Secondary patient...... may improve patient-reported outcomes. TRIAL REGISTRATION NUMBER: ClinicalTrials.gov identifier: NCT02043613....

Framing quality improvement tools and techniques in healthcare the case of improvement leaders' guides.

Science.gov (United States)

Millar, Ross

2013-01-01

The purpose of this paper is to present a study of how quality improvement tools and techniques are framed within healthcare settings. The paper employs an interpretive approach to understand how quality improvement tools and techniques are mobilised and legitimated. It does so using a case study of the NHS Modernisation Agency Improvement Leaders' Guides in England. Improvement Leaders' Guides were framed within a service improvement approach encouraging the use of quality improvement tools and techniques within healthcare settings. Their use formed part of enacting tools and techniques across different contexts. Whilst this enactment was believed to support the mobilisation of tools and techniques, the experience also illustrated the challenges in distributing such approaches. The paper provides an important contribution in furthering our understanding of framing the "social act" of quality improvement. Given the ongoing emphasis on quality improvement in health systems and the persistent challenges involved, it also provides important information for healthcare leaders globally in seeking to develop, implement or modify similar tools and distribute leadership within health and social care settings.

Genetic improvement of vegetables

International Nuclear Information System (INIS)

Jaramillo Vasquez, J.G.

2001-01-01

Some genetic bases of the improvement of vegetables are given. The objectives of the genetic improvement and the fundamental stages of this process are done. The sources of genetic variation are indicated and they are related the reproduction systems of the main horticultural species. It is analyzed the concept of genetic inheritance like base to determine the procedures more appropriate of improvement. The approaches are discussed, has more than enough phenotypic value, genetic action and genotypic variance; Equally the heredability concepts and value of improvement. The conventional methods of improvement are described, like they are: the introduction of species or varieties, the selection, the pure line, the pedigree method, the selection for families, the recurrent selection, the selection for unique seed, the haploids method, the selection for heterosis and the synthetic varieties

Reference Manual on Making School Climate Improvements. School Climate Improvement Resource Package, 2017

Science.gov (United States)

Yoder, N.; Darling-Churchill, K.; Colombi, G. D.; Ruddy, S.; Neiman, S.; Chagnon, E.; Mayo, R.

2017-01-01

This reference manual identifies five overarching sets of activities for improving school climate, with the goal of improving student outcomes (e.g., achievement, attendance, behaviors, and skills). These sets of activities help to initiate, implement, and sustain school climate improvements. For each activity set, the manual presents a clear…

Continuous Personal Improvement.

Science.gov (United States)

Emiliani, M. L.

1998-01-01

Suggests that continuous improvement tools used in the workplace can be applied to self-improvement. Explains the use of such techniques as one-piece flow, kanban, visual controls, and total productive maintenance. Points out misapplications of these tools and describes the use of fishbone diagrams to diagnose problems. (SK)

A new signal restoration method based on deconvolution of the Point Spread Function (PSF) for the Flat-Field Holographic Concave Grating UV spectrometer system

Science.gov (United States)

Dai, Honglin; Luo, Yongdao

2013-12-01

In recent years, with the development of the Flat-Field Holographic Concave Grating, they are adopted by all kinds of UV spectrometers. By means of single optical surface, the Flat-Field Holographic Concave Grating can implement dispersion and imaging that make the UV spectrometer system design quite compact. However, the calibration of the Flat-Field Holographic Concave Grating is very difficult. Various factors make its imaging quality difficult to be guaranteed. So we have to process the spectrum signal with signal restoration before using it. Guiding by the theory of signals and systems, and after a series of experiments, we found that our UV spectrometer system is a Linear Space- Variant System. It means that we have to measure PSF of every pixel of the system which contains thousands of pixels. Obviously, that's a large amount of calculation .For dealing with this problem, we proposes a novel signal restoration method. This method divides the system into several Linear Space-Invariant subsystems and then makes signal restoration with PSFs. Our experiments turn out that this method is effective and inexpensive.

The HST/WFC3 Quicklook Project: A User Interface to Hubble Space Telescope Wide Field Camera 3 Data

Science.gov (United States)

Bourque, Matthew; Bajaj, Varun; Bowers, Ariel; Dulude, Michael; Durbin, Meredith; Gosmeyer, Catherine; Gunning, Heather; Khandrika, Harish; Martlin, Catherine; Sunnquist, Ben; Viana, Alex

2017-06-01

The Hubble Space Telescope's Wide Field Camera 3 (WFC3) instrument, comprised of two detectors, UVIS (Ultraviolet-Visible) and IR (Infrared), has been acquiring ~ 50-100 images daily since its installation in 2009. The WFC3 Quicklook project provides a means for instrument analysts to store, calibrate, monitor, and interact with these data through the various Quicklook systems: (1) a ~ 175 TB filesystem, which stores the entire WFC3 archive on disk, (2) a MySQL database, which stores image header data, (3) a Python-based automation platform, which currently executes 22 unique calibration/monitoring scripts, (4) a Python-based code library, which provides system functionality such as logging, downloading tools, database connection objects, and filesystem management, and (5) a Python/Flask-based web interface to the Quicklook system. The Quicklook project has enabled large-scale WFC3 analyses and calibrations, such as the monitoring of the health and stability of the WFC3 instrument, the measurement of ~ 20 million WFC3/UVIS Point Spread Functions (PSFs), the creation of WFC3/IR persistence calibration products, and many others.

A HST/WFC3 Search for Substellar Companions in the Orion Nebula Cluster

Science.gov (United States)

Strampelli, Giovanni Maria; Aguilar, Jonathan; Aparicio, Antonio; Piotto, Giampaolo; Pueyo, Laurent; Robberto, Massimo

2018-01-01

We present new results relative to the population of substellar binaries in the Orion Nebula Cluster. We reprocessed HST/WFC3 data using an analysis technique developed to detect close companions in the wings of the stellar PSFs, based on the PyKLIP implementation of the KLIP PSF subtraction algorithm. Starting from a sample of ~1200 stars selected over the range J=11-15 mag, we were able to uncover ~80 candidate companions in the magnitude range J=16-23 mag. We use the presence of the 1.4 micron H2O absorption feature in the companion photosphere to discriminate 32 bona-fide substellar candidates from a population of reddened background objects. We derive an estimate of the companion mass assuming a 2Myr isochrone and the reddening of their primary. With 8 stellar companions, 19 brown dwarfs and 5 planetary mass objects, our study provide us with an unbiased sample of companions at the low-mass end of the IMF, probing the transition from binary to planetary systems.

contexto sociocultural de florianópolis, SC

Directory of Open Access Journals (Sweden)

Lucia Hisako Takase Gonçalves

2006-01-01

Full Text Available Investigación evaluativa-diagnóstica con el objetivo de trazar el perfil de la familia cuidadora del anciano. Se desarrollo aplicándose los cuestionários: QPFC y el WHOQOL-Breve, durante el año del 2005. La muestra de 115 cuidadores fueron selecionados entre los ancianos registrados en el PSFs de Florianópolis. Los resultados indican que los cuidadores en su mayoría eran mujeres. Ellas actuaban como cuidadoras únicas a tiempo prolongado y atravesaban dificuldades económicas por tener de abandonar el trabajo. Las cuidadoras no se incomodaban con la tarea del cuidado frente a los comportamientos repetitivos o con cuidados complejos. Considerábanse como cuidadoras por aceptar la misión como necesaria y digna de los principios morales y religiosos. Se concluye que las cuidadoras realizan funciones en condiciones poco favorables, aunque se muestren vocacionadas para el cuidado, el cual impone a los Programas de la Salud de la Familia una atención más específica que considere al binomio anciano/cuidador.

Continuous quality improvement

NARCIS (Netherlands)

Rohlin, Madeleine; Schaub, Rob M.H.; Holbrook, Peter; Leibur, Edvitar; Lévy, Gérard; Roubalikova, Lenka; Nilner, Maria; Roger-Leroi, Valerie; Danner, Gunter; Iseri, Haluk; Feldman, Cecile

2002-01-01

Versch. in: Eur J Dent Educ; 6 (Suppl. 3): 67–77 Continuous quality improvement (CQI) can be envisaged as a circular process of goal-setting, followed by external and internal evaluations resulting in improvements that can serve as goals for a next cycle. The need for CQI is apparent, because of

Active life expectancy of Americans with diabetes: risks of heart disease, obesity, and inactivity.

Science.gov (United States)

Laditka, Sarah B; Laditka, James N

2015-01-01

Few researchers have studied whether diabetes itself is responsible for high rates of disability or mortality, or if factors associated with diabetes contribute importantly. We estimated associations of diabetes, heart disease, obesity, and physical inactivity with life expectancy (LE), the proportion of life with disability (DLE), and disability in the last year of life. Data were from the Panel Study of Income Dynamics (1999-2011 and 1986, African American and white women and men ages 55+, n=1,980, 17,352 person-years). Activities of daily living defined disability. Multinomial logistic Markov models estimated disability transition probabilities adjusted for age, sex, race/ethnicity, education, and the health factors. Microsimulation measured outcomes. White women and men exemplify results. LE was, for women: 3.5 years less with diabetes than without (95% confidence interval, 3.1-4.0), 11.1 less (10.3-12.0) adding heart disease, 21.9 less with all factors (15.3-28.5), all pheart disease, 52.9% (38.9-66.8) with all factors, all pheart disease, obesity, and inactivity, risks that can be modified by health behaviors and medical care. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

The Development of Wisdom: A Social Ecological Approach.

Science.gov (United States)

Igarashi, Heidi; Levenson, Michael R; Aldwin, Carolyn M

2018-02-07

This study examined the development of wisdom within the context of difficult life events (DLEs), and the importance of individuals and their social environments in this process of growth. Social support has long been studied in adulthood, yet less is known about the ways social transactions can promote wisdom. Semi-structured interviews were conducted with men (n = 14) and women (n = 36), ages 56-91 years (M = 71.71; SD = 8.8) who described a DLE and how they coped with it. The analysis was guided by constructivist grounded theory. DLEs included those from childhood through later life. When personal meaning was disrupted by adversity, the social environment played a key role in facilitating new perspectives that corresponded with aspects of wisdom: self-knowledge, compassion, comfort with uncertainty, and accepting complexity. Wisdom is often studied as an individual characteristic, but this study highlighted the relevance of a social ecological perspective to understanding how wisdom development is also facilitated through social transactions. © The Author(s) 2018. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Jomon pottery: cord-imitating decoration

Directory of Open Access Journals (Sweden)

Irina Zhushchikhovskaya

2007-12-01

Full Text Available The paper discusses the decoration of pottery of the Neolithic Jomon culture (Japanese Archipelago, 13600–900 BC. The comb-impressed pattern produced by various kinds of cord or rope stamps is considered as the ‘calling card’ of Jomon pottery from the earliest cultural periods to the latest. Another kind of decoration recognized recently uses the cord not as a patterning tool, but as an essential motif of decorative composition. High relief elements imitate cordage forms and structures – knots, loops, hanging cord, net, etc. This kind of decoration corresponds to the pottery of Mid-dle Jomon period (3500–2500 BC sites located in northern and north-eastern Honshu and southern Hokkaido. It is supposed that the introduction of images of real material object into the field of decorative art was reasoned by the meaning of cord and cordage as cultural signs during the Middle Jomon period. Interesting parallels to some cordage structures reconstructed on Middle Jomon pottery decoration are well known in traditional Japanese culture of VI–XX cc. Analytical interpretation of this resemblance may became the subject of special research.

Different defect levels configurations between double layers of nanorods and film in ZnO grown on c-Al2O3 by MOCVD

International Nuclear Information System (INIS)

Wu, Bin; Zhang, Yuantao; Shi, Zhifeng; Li, Xiang; Cui, Xijun; Zhuang, Shiwei; Zhang, Baolin; Du, Guotong

2014-01-01

Epitaxial ZnO structures with inherent two layers of nanorods layer on film layer were fabricated on c-Al 2 O 3 by metal-organic chemical vapor deposition (MOCVD) and studied by photoluminescence. Specially, photoluminescence spectra for the film layer were obtained by rendering the excitation from the substrate side. Different defect levels configurations between nanorods and film were revealed. Zinc vacancies tend to form in top nanorods layer, whereas abundant zinc–oxygen divacancies accumulate in bottom film layer. An acceptor state with activation energy of ∼200 meV is exclusive to the film layer. The stacking fault related acceptor and Al introduced donor are present in both layers. Besides, two other defect related donors contained in the nanorods layer perhaps also exist within the film layer. - Highlights: • Inherent double layer ZnO of nanorods on film layer were studied by PL. • V Zn tend to form in the nanorods layer, and V ZnO accumulate in the film layer. • An acceptor with activation energy of ∼200 meV is exclusive to the film layer. • Pure NBE emission without DLE in RT PL spectrum does not mean good crystallinity

Calibrating the Near-Infrared Tip of the Red Giant Branch with Multiwavelength Photometry

Science.gov (United States)

Durbin, Meredith

2017-08-01

The near-infrared (NIR) tip of the red giant branch (TRGB) shows outstanding promise as a distance indicator. In the JWST era, the NIR-TRGB will bridge the gap from local geometric parallax (with Gaia) out to the low-velocity Hubble flow in a single step, in all types of galaxies. However, there currently exist several impediments to JWST's using the TRGB to full advantage. Dalcanton et al. (2012) presented the most comprehensive dataset available for calibrating the TRGB absolute magnitude, with optical and NIR coverage of 23 nearby dwarf and spiral galaxies spanning a wide range of ages and metallicities. However, subtle offsets between this dataset, theoretical models, and globular clusters raise concerns about the calibration.We propose to perform a complete re-reduction and re-analysis of this dataset. We have developed a pipeline that leverages simultaneous fitting of optical and NIR data to produce NIR photometry of higher quality and completeness, with up to 1.5 mag greater depth than can be achieved with the NIR alone. With this added depth, improvements in photometric precision, and updated WFC3/IR PSFs and flux calibration, we will derive uniform, precise, and accurate NIR TRGB measurements, with which we will be able to resolve standing issues with the TRGB color-absolute magnitude relation and its behavior with changing star-formation histories. This work will lay the groundwork for extending the TRGB distance scale out to at least 37 Mpc with JWST. We will release the resulting 4-filter optical-NIR photometry as HLSPs for use by the community before the launch of JWST, to serve as a resource for proposing for stellar population observations in the NIR.

Can Quality Improvement System Improve Childcare Site Performance in School Readiness?

Science.gov (United States)

Ma, Xin; Shen, Jianping; Lu, Xuejin; Brandi, Karen; Goodman, Jeff; Watson, Grace

2013-01-01

The authors evaluated the effectiveness of the Quality Improvement System (QIS) developed and implemented by Children's Services Council of Palm Beach County (Florida) as a voluntary initiative to improve the quality of childcare and education. They adopted a growth model approach to investigate whether childcare sites that participated in QIS…

Improving School Improvement: Development and Validation of the CSIS-360, a 360-Degree Feedback Assessment for School Improvement Specialists

Science.gov (United States)

McDougall, Christie M.

2013-01-01

The purpose of the mixed methods study was to develop and validate the CSIS-360, a 360-degree feedback assessment to measure competencies of school improvement specialists from multiple perspectives. The study consisted of eight practicing school improvement specialists from a variety of settings. The specialists nominated 23 constituents to…

Continuous quality improvement

International Nuclear Information System (INIS)

Bourne, P.B.

1985-01-01

This paper describes the various statistical tools used at the Hanford Engineering Development Laboratory to achieve continuous quality improvement in the development of Breeder Reactor Technology and in reactor operations. The role of the quality assurance professionals in this process, including quantifiable measurements using actual examples, is provided. The commitment to quality improvement through top management involvement is dramatically illustrated

The Relationship of Engagement in Improvement Practices to Outcome Measures in Large-Scale Quality Improvement Initiatives.

Science.gov (United States)

Foster, Gregory L; Kenward, Kevin; Hines, Stephen; Joshi, Maulik S

Hospital engagement networks (HENs) are part of the largest health care improvement initiative ever undertaken. This article explores whether engagement in improvement activities within a HEN affected quality measures. Data were drawn from 1174 acute care hospitals. A composite quality score was created from 10 targeted topic area measures multiplied by the number of qualifying topics. Scores improved from 5.4 (SD = 6.8) at baseline to 4.6 (5.9) at remeasurement; P improvement ( P improvement, whereas hospitals in the West ( P = .0009) did not improve as much as hospitals in other regions. After adjusting for hospital characteristics, hospitals with improvement champions ( P = .008), a higher level of engagement with their state association ( P = .001), and more leadership involvement ( P = .005) in HEN demonstrated greater improvement.

Quality improvement - the future begins

International Nuclear Information System (INIS)

Boissy, G.J.

1987-01-01

The comprehensive quality improvement program of the Florida Power and Light Co. is described: management commitment, quality improvement process, quality improvement teams, policy development, and quality in daily work are discussed

Ergonomic Improvements for Foundries

Energy Technology Data Exchange (ETDEWEB)

Frank Peters; Patrick Patterson

2002-06-18

The goal of this project was to make improvements to the production systems of the steel casting industry through ergonomic improvements. Because of the wide variety of products, the wide range of product sizes, and the relatively small quantities of any particular product, manual operations remain a vital part of the production systems of the steel casting companies. Ergonomic improvements will assist the operators to more efficiently and consistently produce quality products.

Measure to succeed: How to improve employee participation in continuous improvement

Energy Technology Data Exchange (ETDEWEB)

Jurburg, M.; Viles, E.; Tanco, M.; Mateo, R.; Lleó, A.

2016-07-01

Purpose: Achieving employee participation in continuous improvement (CI) systems is considered as one of the success factors for the sustainability of those systems. Yet, it is also very difficult to obtain because of the interaction of many critical factors that affect employee participation. Therefore, finding ways of measuring all these critical factors can help practitioners manage the employee participation process accordingly. Design/methodology/approach: Based upon the existing literature, this paper presents a 4-Phase (9 steps) diagnostic tool to measure the main determinants associated with the implementation of CI systems affecting employee participation in improvement activities. Findings: The tool showed its usefulness to detect the main weaknesses and improvement opportunities for improving employee participation in CI through the application in two different cases. Practical implications: This diagnostic tool could be particularly interesting for companies adopting CI and other excellence frameworks, which usually include a pillar related to people development inside the organization, but do not include tools to diagnose the state of this pillar. Originality/value: This diagnostic tool presents a user’s perspective approach, ensuring that the weaknesses and improvement opportunities detected during the diagnose come directly from the users of the CI system, which in this case are the employees themselves. Given that the final objective is to identify reasons and problems hindering employee participation, adopting this user’s perspective approach seem more relevant than adopting other more traditional approaches, based on gathering information from the CI system itself or from the CI managers.

Measure to succeed: How to improve employee participation in continuous improvement

International Nuclear Information System (INIS)

Jurburg, M.; Viles, E.; Tanco, M.; Mateo, R.; Lleó, A.

2016-01-01

Purpose: Achieving employee participation in continuous improvement (CI) systems is considered as one of the success factors for the sustainability of those systems. Yet, it is also very difficult to obtain because of the interaction of many critical factors that affect employee participation. Therefore, finding ways of measuring all these critical factors can help practitioners manage the employee participation process accordingly. Design/methodology/approach: Based upon the existing literature, this paper presents a 4-Phase (9 steps) diagnostic tool to measure the main determinants associated with the implementation of CI systems affecting employee participation in improvement activities. Findings: The tool showed its usefulness to detect the main weaknesses and improvement opportunities for improving employee participation in CI through the application in two different cases. Practical implications: This diagnostic tool could be particularly interesting for companies adopting CI and other excellence frameworks, which usually include a pillar related to people development inside the organization, but do not include tools to diagnose the state of this pillar. Originality/value: This diagnostic tool presents a user’s perspective approach, ensuring that the weaknesses and improvement opportunities detected during the diagnose come directly from the users of the CI system, which in this case are the employees themselves. Given that the final objective is to identify reasons and problems hindering employee participation, adopting this user’s perspective approach seem more relevant than adopting other more traditional approaches, based on gathering information from the CI system itself or from the CI managers.

Guide for prioritizing power plant productivity improvement projects: handbook of availability improvement methodology

International Nuclear Information System (INIS)

1981-01-01

As part of its program to help improve electrical power plant productivity, the Department of Energy (DOE) has developed a methodology for evaluating productivity improvement projects. This handbook presents a simplified version of this methodology called the Availability Improvement Methodology (AIM), which provides a systematic approach for prioritizing plant improvement projects. Also included in this handbook is a description of data taking requirements necessary to support the AIM methodology, benefit/cost analysis, and root cause analysis for tracing persistent power plant problems. In applying the AIM methodology, utility engineers should be mindful that replacement power costs are frequently greater for forced outages than for planned outages. Equivalent availability includes both. A cost-effective ranking of alternative plant improvement projects must discern between those projects which will reduce forced outages and those which might reduce planned outages. As is the case with any analytical procedure, engineering judgement must be exercised with respect to results of purely mathematical calculations

Infrastructure for large-scale quality-improvement projects: early lessons from North Carolina Improving Performance in Practice.

Science.gov (United States)

Newton, Warren P; Lefebvre, Ann; Donahue, Katrina E; Bacon, Thomas; Dobson, Allen

2010-01-01

Little is known regarding how to accomplish large-scale health care improvement. Our goal is to improve the quality of chronic disease care in all primary care practices throughout North Carolina. Methods for improvement include (1) common quality measures and shared data system; (2) rapid cycle improvement principles; (3) quality-improvement consultants (QICs), or practice facilitators; (4) learning networks; and (5) alignment of incentives. We emphasized a community-based strategy and developing a statewide infrastructure. Results are reported from the first 2 years of the North Carolina Improving Performance in Practice (IPIP) project. A coalition was formed to include professional societies, North Carolina AHEC, Community Care of North Carolina, insurers, and other organizations. Wave One started with 18 practices in 2 of 9 regions of the state. Quality-improvement consultants recruited practices. Over 80 percent of practices attended all quarterly regional meetings. In 9 months, almost all diabetes measures improved, and a bundled asthma measure improved from 33 to 58 percent. Overall, the magnitude of improvement was clinically and statistically significant (P = .001). Quality improvements were maintained on review 1 year later. Wave Two has spread to 103 practices in all 9 regions of the state, with 42 additional practices beginning the enrollment process. Large-scale health care quality improvement is feasible, when broadly supported by statewide leadership and community infrastructure. Practice-collected data and lack of a control group are limitations of the study design. Future priorities include maintaining improved sustainability for practices and communities. Our long-term goal is to transform all 2000 primary-care practices in our state.

Software Process Improvement Defined

DEFF Research Database (Denmark)

Aaen, Ivan

2002-01-01

This paper argues in favor of the development of explanatory theory on software process improvement. The last one or two decades commitment to prescriptive approaches in software process improvement theory may contribute to the emergence of a gulf dividing theorists and practitioners....... It is proposed that this divide be met by the development of theory evaluating prescriptive approaches and informing practice with a focus on the software process policymaking and process control aspects of improvement efforts...

School Climate Improvement Action Guide for Working with Families. School Climate Improvement Resource Package

Science.gov (United States)

National Center on Safe Supportive Learning Environments, 2017

2017-01-01

Improving school climate takes time and commitment from a variety of people in a variety of roles. This document outlines how family members--including guardians of students--can support school climate improvements. Key action steps are provided for the following strategies: (1) Participate in planning for school climate improvements; (2) Engage…

School Climate Improvement Action Guide for Working with Students. School Climate Improvement Resource Package

Science.gov (United States)

National Center on Safe Supportive Learning Environments, 2017

2017-01-01

Improving school climate takes time and commitment from a variety of people in a variety of roles. This document outlines key action steps to engage students in the school climate improvement process. Key action steps are provided for the following strategies: (1) Participate in planning for school climate improvements; (2) Engage stakeholders in…

Improv(ing) the Academy: Applied Improvisation as a Strategy for Educational Development

Science.gov (United States)

Rossing, Jonathan P.; Hoffmann-Longtin, Krista

2016-01-01

Improvisational theater training (or "improv") is a strategy employed by many business leaders and educators to cultivate creativity and collaboration amid change. Drawing on improv principles such as "Yes, And…" and "Make your scene partners look good," we explore the ways in which educational developers might apply…

Documentation of Improvement Competences

DEFF Research Database (Denmark)

Johansen, Jørn; Back, Karsten Kristensen; Korsaa, Morten

2017-01-01

This paper demonstrates how a report used in a Master in Project management and Process improvement training at Roskilde University Denmark can be used to evaluate if a student can pass the ECQA SPI Manager exam. It also demonstrates how the structure of the report addresses all necessary...... Manager job role, which is based on the SPI Manifesto and the ImprovAbilityTM model (part of ISO/IEC 33014 Guideline for Process Improvement) among other types of knowledge and research....... competences, which should or could be brought into play during the project – and therefor also in one way or another addresses the quality of the activated competences in the improvement project – a kind of qualification. The clue is that the structure of the report follows the units and element in the SPI...

Researchers' Roles in Patient Safety Improvement.

Science.gov (United States)

Pietikäinen, Elina; Reiman, Teemu; Heikkilä, Jouko; Macchi, Luigi

2016-03-01

In this article, we explore how researchers can contribute to patient safety improvement. We aim to expand the instrumental role researchers have often occupied in relation to patient safety improvement. We reflect on our own improvement model and experiences as patient safety researchers in an ongoing Finnish multi-actor innovation project through self-reflective narration. Our own patient safety improvement model can be described as systemic. Based on the purpose of the innovation project, our improvement model, and the improvement models of the other actors in the project, we have carried out a wide range of activities. Our activities can be summarized in 8 overlapping patient safety improvement roles: modeler, influencer, supplier, producer, ideator, reflector, facilitator, and negotiator. When working side by side with "practice," researchers are offered and engage in several different activities. The way researchers contribute to patient safety improvement and balance between different roles depends on the purpose of the study, as well as on the underlying patient safety improvement models. Different patient safety research paradigms seem to emphasize different improvement roles, and thus, they also face different challenges. Open reflection on the underlying improvement models and roles can help researchers with different backgrounds-as well as other actors involved in patient safety improvement-in structuring their work and collaborating productively.

Quality improvement: the nurse's role.

Science.gov (United States)

Moran, M J; Johnson, J E

1992-06-01

Continuous quality improvement is a concept which includes: Quality assurance--the provision of services that meet an appropriate standard. Problem resolution--including all departments involved in the issue at hand. Quality improvement--a continuous process involving all levels of the organization working together across departmental lines to produce better services for health care clients. Deming (1982b) and others have espoused total system reform to achieve quality improvement--not merely altering the current system, but radically changing it. It must be assumed that those who provide services at the staff level are acting in good faith and are not willfully failing to do what is correct (Berwick, 1991). Those who perform direct services are in an excellent position to identify the need for change in service delivery processes. Based on this premise, the staff nurse--who is at the heart of the system--is the best person to assess the status of health care services and to work toward improving the processes by which these services are provided to clients in the health care setting. The nurse manager must structure the work setting to facilitate the staff nurse's ability to undertake constructive action for improving care. The use of quality circles, quality councils, or quality improvement forums to facilitate the coordination of quality improvement efforts is an effective way to achieve success. The QA coordinator assists departments in documenting that the quality improvement efforts are effective across all departments of the organization, and aggregates data to demonstrate that they meet the requirements of external regulatory agencies, insurers, and professional standards. The nurse executive provides the vision and secures the necessary resources to ensure that the organization's quality improvement efforts are successful. By inspiring and empowering the staff in their efforts to improve the process by which health care is provided, nurse managers

Dlouhodobý hmotný majetek dle českých účetních předpisů a IAS/IFRS

OpenAIRE

Karľa, Tomáš

2009-01-01

Purpose of this work is to describe tangible fixed assets in compliance with czech accounting regulations and International Accounting Standards (IAS/IFRS) and compare them, i. e. point out common principles and differences of czech accounting regulations and IAS (primarily IAS 16) in this matter. Intangible fixed assets (IAS 38) and specifity of agriculture (IAS 41) are not objects of this work.

Improving Reference Service: The Case for Using a Continuous Quality Improvement Method.

Science.gov (United States)

Aluri, Rao

1993-01-01

Discusses the evaluation of library reference service; examines problems with past evaluations, including the lack of long-term planning and a systems perspective; and suggests a method for continuously monitoring and improving reference service using quality improvement tools such as checklists, cause and effect diagrams, Pareto charts, and…

35/30 outage improvement project

International Nuclear Information System (INIS)

Clewett, L.

2011-01-01

Outage performance is a significant contributor to the business plan at Bruce Power. A process improvement initiative commenced in 2010-11 to improve outage efficiency and predictability. 12 teams (over 200 people) participated in improvement identification in four areas: Organizational Engagement; Outage Scope; Resources; and, Critical Outage Execution. Out of over 550 initiatives identified, 200 are being incorporated into the Outage Improvement Initiative. Key deliverables include: Development of a long-range 'fleet-level' business strategy to integrate outage duration, outage improvements and unit refurbishments; Development of a 35 day outage schedule template; Determining optimal outage organization to perform outages on an 8-unit site; Improved schedule adherence and productivity; Process to integrate scope needs to support life-cycle and long-range outage needs improvement while meeting near term and regulatory requirements; Consistent methodology in planning of outages to front-end load the high risk work into the outage schedule; Consistent baseline by senior leaders for the expectations of milestone ownership and completion; Consistent framework for milestone compliance and preparation; Communication strategy to educate personnel on the importance of the outage program and nuclear safety, business goals, and budget; and, Suite of metrics based upon industry benchmarks. The Outage Improvement Initiative has a goal of 35 day outages every 30 months. This potentially represents considerable savings to the Bruce Power business plan, both direct revenue savings attributed to reduced outage duration, as well as incremental outage cost savings. Other improvements from the initiative will include personnel radiation exposure and equipment reliability due to decreased outage duration and adherence to scoping, assessing and long lead part milestones. This presentation will describe the outage improvement initiatives to achieve a goal of consistent 35 day outages

35/30 outage improvement project

Energy Technology Data Exchange (ETDEWEB)

Clewett, L. [Bruce Power, Tiverton, Ontario (Canada)

2011-07-01

Outage performance is a significant contributor to the business plan at Bruce Power. A process improvement initiative commenced in 2010-11 to improve outage efficiency and predictability. 12 teams (over 200 people) participated in improvement identification in four areas: Organizational Engagement; Outage Scope; Resources; and, Critical Outage Execution. Out of over 550 initiatives identified, 200 are being incorporated into the Outage Improvement Initiative. Key deliverables include: Development of a long-range 'fleet-level' business strategy to integrate outage duration, outage improvements and unit refurbishments; Development of a 35 day outage schedule template; Determining optimal outage organization to perform outages on an 8-unit site; Improved schedule adherence and productivity; Process to integrate scope needs to support life-cycle and long-range outage needs improvement while meeting near term and regulatory requirements; Consistent methodology in planning of outages to front-end load the high risk work into the outage schedule; Consistent baseline by senior leaders for the expectations of milestone ownership and completion; Consistent framework for milestone compliance and preparation; Communication strategy to educate personnel on the importance of the outage program and nuclear safety, business goals, and budget; and, Suite of metrics based upon industry benchmarks. The Outage Improvement Initiative has a goal of 35 day outages every 30 months. This potentially represents considerable savings to the Bruce Power business plan, both direct revenue savings attributed to reduced outage duration, as well as incremental outage cost savings. Other improvements from the initiative will include personnel radiation exposure and equipment reliability due to decreased outage duration and adherence to scoping, assessing and long lead part milestones. This presentation will describe the outage improvement initiatives to achieve a goal of consistent 35 day

Accelerate Water Quality Improvement

Science.gov (United States)

EPA is committed to accelerating water quality improvement and minimizing negative impacts to aquatic life from contaminants and other stressors in the Bay Delta Estuary by working with California Water Boards to strengthen water quality improvement plans.

Entropy based software processes improvement

NARCIS (Netherlands)

Trienekens, J.J.M.; Kusters, R.J.; Kriek, D.; Siemons, P.

2009-01-01

Actual results of software process improvement projects show different levels of success. Although many software development organisations have adopted improvement models such as CMMI, it appears to be difficult to improve software development processes in the right way, e.g. tuned to the actual

Infrastructure for Large-Scale Quality-Improvement Projects: Early Lessons from North Carolina Improving Performance in Practice

Science.gov (United States)

Newton, Warren P.; Lefebvre, Ann; Donahue, Katrina E.; Bacon, Thomas; Dobson, Allen

2010-01-01

Introduction: Little is known regarding how to accomplish large-scale health care improvement. Our goal is to improve the quality of chronic disease care in all primary care practices throughout North Carolina. Methods: Methods for improvement include (1) common quality measures and shared data system; (2) rapid cycle improvement principles; (3)…

Do clinical safety charts improve paramedic key performance indicator results? (A clinical improvement programme evaluation).

Science.gov (United States)

Ebbs, Phillip; Middleton, Paul M; Bonner, Ann; Loudfoot, Allan; Elliott, Peter

2012-07-01

Is the Clinical Safety Chart clinical improvement programme (CIP) effective at improving paramedic key performance indicator (KPI) results within the Ambulance Service of New South Wales? The CIP intervention area was compared with the non-intervention area in order to determine whether there was a statistically significant improvement in KPI results. The CIP was associated with a statistically significant improvement in paramedic KPI results within the intervention area. The strategies used within this CIP are recommended for further consideration.

Improving Banking Supervision

OpenAIRE

Mayes, David G.

1998-01-01

This paper explains how banking supervision within the EU, and in Finland in particular, can be improved by the implementation of greater market discipline and related changes. Although existing EU law, institutions, market structures and practices of corporate governance restrict the scope for change, substantial improvements can be introduced now while there is a window of opportunity for change. The economy is growing H5ly and the consequences of the banking crises of the early 1990s have ...

Using Lean to Advance Quality Improvement Research.

Science.gov (United States)

Blackmore, Christopher Craig; Williams, Barbara L; Ching, Joan M; Chafetz, Lynne A; Kaplan, Gary S

2016-01-01

Quality improvement research skills are not commonplace among quality improvement practitioners, and research on the effectiveness of quality improvement has not always kept pace with improvement innovation. However, the Lean tools applied to quality improvement should be equally relevant to the advancement of quality improvement research. We applied the Lean methods to develop a simplified quality improvement publication pathway enabling a small research methodology group to increase quality improvement research throughout the institution. The key innovations of the pathway are horizontal integration of the quality improvement research methods group across the institution, implementation of a Lean quality improvement research pathway, and application of a just-in-time quality improvement research toolkit. This work provides a road map and tools for the acceleration of quality improvement research. At our institution, the Lean quality improvement research approach was associated with statistically significant increases in the number (annual mean increase from 3.0 to 8.5, p = .03) and breadth of published quality improvement research articles, and in the number of quality improvement research projects currently in process. Application of Lean methods to the quality improvement research process can aid in increasing publication of quality improvement articles from across the institution.

Improving Agile Software Practice

DEFF Research Database (Denmark)

Tjørnehøj, Gitte

2006-01-01

Software process improvement in small and agile organizations is often problematic, but achieving good SPI-assessments can still be necessary to stay in the marked or to meet demands of multinational owners. The traditional norm driven, centralized and control centered improvement approaches has...

Why Process Improvement Training Fails

Science.gov (United States)

Lu, Dawei; Betts, Alan

2011-01-01

Purpose: The purpose of this paper is to explore the underlying reasons why providing process improvement training, by itself, may not be sufficient to achieve the desired outcome of improved processes; and to attempt a conceptual framework of management training for more effective improvement. Design/methodology/approach: Two similar units within…

Quantitative research versus quality assurance, quality improvement, total quality management, and continuous quality improvement.

Science.gov (United States)

Vogelsang, J

1999-04-01

The purpose of this report is to provide a review of the scientific method used in the quantitative research studies for consumers, evaluators, and applied nurse researchers. The fundamental characteristics of the problem-solving/ performance-improvement processes of quality assurance, quality improvement, total quality management, and continuous quality improvement are described. Research is compared with these processes, and is followed by a discussion about the publication of quantitative research findings.

Improving with Kaizen

OpenAIRE

Dahl, Helene

2016-01-01

Master's thesis in Executive MBA Kaizen is a Japanese word translated to Good Change, but the meaning behind the word is continuous improvement. Kaizen events are a part of the Lean philosophy and developed by Toyota. The event typically takes place during 4-5 days and aims to make significant change by identifying possibilities for improvement. This thesis is a study of one Kaizen event that took place in an American oil-service company in Sandnes, Norway. A case study has been u...

KAIZEN CONTINUOUS IMPROVEMENT

OpenAIRE

Yenque D., Julio; García P., Manuel; Raez G., Luis

2014-01-01

Many times we ask the question why Japanese companies are competitive?, Surely many of the answers to this mystery have support in the Kaizen. And the Kaizen is not a simple concept, it is a whole way of life that involves both managers and workers in the pursuit of progressive improvement of enterprises. In his book Kaizen, The Key to Japanese Competitive Advantage, Masaaki Imai explains in simple terms what is the essence of this philosophy: Kaizen means improvement means further progressiv...

Historical Improvement in Speed Skating Economy

NARCIS (Netherlands)

Noordhof, Dionne A; Tok, Elmy van; Joosten, Florentine S J G M; Hettinga, Florentina J; Hoozemans, Marco J M; Foster Jr., Carl; Koning, Jos J de

Half the improvement in 1500-m speed-skating world records can be explained by technological innovations and the other half by athletic improvement. It is hypothesized that improved skating economy is accountable for much of the athletic improvement. PURPOSE: To determine skating economy in

Improving patient safety culture in Saudi Arabia (2012-2015): trending, improvement and benchmarking.

Science.gov (United States)

Alswat, Khalid; Abdalla, Rawia Ahmad Mustafa; Titi, Maher Abdelraheim; Bakash, Maram; Mehmood, Faiza; Zubairi, Beena; Jamal, Diana; El-Jardali, Fadi

2017-08-02

Measuring patient safety culture can provide insight into areas for improvement and help monitor changes over time. This study details the findings of a re-assessment of patient safety culture in a multi-site Medical City in Riyadh, Kingdom of Saudi Arabia (KSA). Results were compared to an earlier assessment conducted in 2012 and benchmarked with regional and international studies. Such assessments can provide hospital leadership with insight on how their hospital is performing on patient safety culture composites as a result of quality improvement plans. This paper also explored the association between patient safety culture predictors and patient safety grade, perception of patient safety, frequency of events reported and number of events reported. We utilized a customized version of the patient safety culture survey developed by the Agency for Healthcare Research and Quality. The Medical City is a tertiary care teaching facility composed of two sites (total capacity of 904 beds). Data was analyzed using SPSS 24 at a significance level of 0.05. A t-Test was used to compare results from the 2012 survey to that conducted in 2015. Two adopted Generalized Estimating Equations in addition to two linear models were used to assess the association between composites and patient safety culture outcomes. Results were also benchmarked against similar initiatives in Lebanon, Palestine and USA. Areas of strength in 2015 included Teamwork within units, and Organizational Learning-Continuous Improvement; areas requiring improvement included Non-Punitive Response to Error, and Staffing. Comparing results to the 2012 survey revealed improvement on some areas but non-punitive response to error and Staffing remained the lowest scoring composites in 2015. Regression highlighted significant association between managerial support, organizational learning and feedback and improved survey outcomes. Comparison to international benchmarks revealed that the hospital is performing at or

Brunswick improvement program

International Nuclear Information System (INIS)

Howe, P.W.

1985-01-01

The performance of the twin 790-MW Mark-4 boiling water reactors located at the Brunswick steam electric plant has historically been well below average. The plant experienced low availability, low capacity factors, high US Nuclear Regulatory Commission (NRC) violations, excessive radioactive waste generation, excessive licensee event reports (LERs), an unacceptable industrial safety record, poor SALP ratings, and numerous other deficiencies leading to unacceptable performance. In June 1982 it was determined that certain periodic tests (PT) had never been performed. While one unit was down for a refueling/modification outage, Carolina Power and Light (CP and L) elected to bring the other unit off line and perform an extensive self-examination. As a result, a number of needed improvements covering a wide range of plant activities were identified. CP and L elected to consolidate all the elements of the improvement into a single, plant-wide program. The consolidated program, called the Brunswick Improvement Program (BIP), was established. Major objectives of the BIP and measurable results are presented

Improving Loop Dependence Analysis

DEFF Research Database (Denmark)

Jensen, Nicklas Bo; Karlsson, Sven

2017-01-01

Programmers can no longer depend on new processors to have significantly improved single-thread performance. Instead, gains have to come from other sources such as the compiler and its optimization passes. Advanced passes make use of information on the dependencies related to loops. We improve th...

AGS slow extraction improvements

International Nuclear Information System (INIS)

Glenn, J.W.; Smith, G.A.; Sandberg, J.N.; Repeta, L.; Weisberg, H.

1979-01-01

Improvement of the straightness of the F5 copper septum increased the AGS slow extraction efficiency from approx. 80% to approx. 90%. Installation of an electrostatic septum at H2O, 24 betatron wavelengths upstream of F5, further improved the extraction efficiency to approx. 97%

Nuclear safety. Improvement programme

International Nuclear Information System (INIS)

2000-01-01

In this brochure the improvement programme of nuclear safety of the Mochovce NPP is presented in detail. In 1996, a 'Mochovce NPP Nuclear Safety Improvement Programme' was developed in the frame of unit 1 and 2 completion project. The programme has been compiled as a continuous one, with the aim to reach the highest possible safety level at the time of commissioning and to establish good preconditions for permanent safety improvement in future. Such an approach is in compliance with the world's trends of safety improvement, life-time extension, modernisation and nuclear station power increase. The basic document for development of the 'Programme' is the one titled 'Safety Issues and their Ranking for WWER 440/213 NPP' developed by a group of IAEA experts. The following organisations were selected for solution of the safety measures: EUCOM (Consortium of FRAMATOME, France, and SIEMENS, Germany); SKODA Prague, a.s.; ENERGOPROJEKT Prague, a.s. (EGP); Russian organisations associated in ATOMENERGOEXPORT; VUJE Trnava, a.s

Improved radionuclide bone imaging agent injection needle withdrawal method can improve image quality

International Nuclear Information System (INIS)

Qin Yongmei; Wang Laihao; Zhao Lihua; Guo Xiaogang; Kong Qingfeng

2009-01-01

Objective: To investigate the improvement of radionuclide bone imaging agent injection needle withdrawal method on whole body bone scan image quality. Methods: Elbow vein injection syringe needle directly into the bone imaging agent in the routine group of 117 cases, with a cotton swab needle injection method for the rapid pull out the needle puncture point pressing, pressing moment. Improvement of 117 cases of needle injection method to put two needles into the skin swabs and blood vessels, pull out the needle while pressing two or more entry point 5min. After 2 hours underwent whole body bone SPECT imaging plane. Results: The conventional group at the injection site imaging agents uptake rate was 16.24%, improved group was 2.56%. Conclusion: The modified bone imaging agent injection needle withdrawal method, injection-site imaging agent uptake were significantly decreased whole body bone imaging can improve image quality. (authors)

Combining clinical microsystems and an experiential quality improvement curriculum to improve residency education in internal medicine.

Science.gov (United States)

Tess, Anjala V; Yang, Julius J; Smith, C Christopher; Fawcett, Caitlin M; Bates, Carol K; Reynolds, Eileen E

2009-03-01

Beth Israel Deaconess Medical Center's internal medicine residency program was admitted to the new Education Innovation Project accreditation pathway of the Accreditation Council of Graduate Medical Education to begin in July 2006. The authors restructured the inpatient medical service to create clinical microsystems in which residents practice throughout residency. Program leadership then mandated an active curriculum in quality improvement based in those microsystems. To provide the experience to every graduating resident, a core faculty in patient safety was trained in the basics of quality improvement. The authors hypothesized that such changes would increase the number of residents participating in quality improvement projects, improve house officer engagement in quality improvement work, enhance the culture of safety the residents perceive in their training environment, improve work flow on the general medicine ward rotations, and improve the overall educational experience for the residents on ward rotations.The authors describe the first 18 months of the intervention (July 2006 to January 2008). The authors assessed attitudes and the educational experience with surveys and evaluation forms. After the intervention, the authors documented residents' participation in projects that overlapped with hospital priorities. More residents reported roles in designing and implementing quality improvement changes. Residents also noted greater satisfaction with the quality of care they deliver. Fewer residents agreed or strongly agreed that the new admitting system interfered with communication. Ongoing residency program assessment showed an improved perception of workload, and educational ratings of rotations improved. The changes required few resources and can be transported to other settings.

Can training improve human performance

International Nuclear Information System (INIS)

Waylett, W.J. Jr.

1986-01-01

The nuclear industry has made a significant commitment to improve training through the implementation of performance-based training programs. Senior management expects that human performance improvement will result from this significant resource allocation. The author examines this hypothesis and discusses other issues that may interfere with enhancing human performance through training. The integration of quality improvement concepts to support training is also discussed by the author, who was a pioneer facilitator during the development of Florida Power and Light Company's Quality Improvement Program. Critical success factors are proposed based on the author's experience as a plant manager, training manager and quality facilitator

IMPROVING PATIENT SAFETY:

DEFF Research Database (Denmark)

Bagger, Bettan; Taylor Kelly, Hélène; Hørdam, Britta

Improving patient safety is both a national and international priority as millions of patients Worldwide suffer injury or death every year due to unsafe care. University College Zealand employs innovative pedagogical approaches in educational design. Regional challenges related to geographic......, social and cultural factors have resulted in a greater emphasis upon digital technology. Attempts to improve patient safety by optimizing students’ competencies in relation to the reporting of clinical errors, has resulted in the development of an interdisciplinary e-learning concept. The program makes...

Automated Student Model Improvement

Science.gov (United States)

Koedinger, Kenneth R.; McLaughlin, Elizabeth A.; Stamper, John C.

2012-01-01

Student modeling plays a critical role in developing and improving instruction and instructional technologies. We present a technique for automated improvement of student models that leverages the DataShop repository, crowd sourcing, and a version of the Learning Factors Analysis algorithm. We demonstrate this method on eleven educational…

Involving patients in care decisions improves satisfaction: an outcomes-based quality improvement project.

Science.gov (United States)

Leff, Ellen W

2004-05-01

A home care agency used quality improvement processes to improve patient satisfaction survey ratings. The focus was on involving patients in decisions about their care. A multidisciplinary team developed creative strategies to increase staff awareness and enhance customer service skills, which had dramatic results.

An improvement project within urological care.

Science.gov (United States)

Khatami, Annelie; Rosengren, Kristina

2015-01-01

The purpose of this paper is to describe staff experiences in an on-going improvement project regarding patients with ureteral stones. A qualitative descriptive study based on eight group interviews and 48 narratives, was performed. Data were analysed using qualitative content analysis. Trustworthiness was ensured by using a well-documented improvement process method during six months. The results formed three categories: an absent comprehensive view; complexity; and vulnerability within the organisation. A holistic perspective regarding urological care at the micro-, meso- and macro-levels is needed to improve planning and caring processes. This study includes one team (six members, different health professionals) within the same urology department. Results show that staff need information, such as guidelines and support throughout the improvement work to deliver high-quality care. Moreover, there is a need for evidence-based guidelines at national level to support improvement work. Healthcare staff need to pay attention to all team member needs to improve urological care. Organisational and managerial aspect are needed to support clear and common goals regarding healthcare improvement work. Urological improvement projects, generally, are lacking, which is why this study is important to improve nephrolithiasis patient care.

Improved Fourier-transform profilometry

International Nuclear Information System (INIS)

Mao Xianfu; Chen Wenjing; Su Xianyu

2007-01-01

An improved optical geometry of the projected-fringe profilometry technique, in which the exit pupil of the projecting lens and the entrance pupil of the imaging lens are neither at the same height above the reference plane nor coplanar, is discussed and used in Fourier-transform profilometry. Furthermore, an improved fringe-pattern description and phase-height mapping formula based on the improved geometrical generalization is deduced. Employing the new optical geometry, it is easier for us to obtain the full-field fringe by moving either the projector or the imaging device. Therefore the new method offers a flexible way to obtain reliable height distribution of a measured object

NCCDS configuration management process improvement

Science.gov (United States)

Shay, Kathy

1993-01-01

By concentrating on defining and improving specific Configuration Management (CM) functions, processes, procedures, personnel selection/development, and tools, internal and external customers received improved CM services. Job performance within the section increased in both satisfaction and output. Participation in achieving major improvements has led to the delivery of consistent quality CM products as well as significant decreases in every measured CM metrics category.

Room for improvement? Leadership, innovation culture and uptake of quality improvement methods in general practice.

Science.gov (United States)

Apekey, Tanefa A; McSorley, Gerry; Tilling, Michelle; Siriwardena, A Niroshan

2011-04-01

Leadership and innovation are currently seen as essential elements for the development and maintenance of high-quality care. Little is known about the relationship between leadership and culture of innovation and the extent to which quality improvement methods are used in general practice. This study aimed to assess the relationship between leadership behaviour, culture of innovation and adoption of quality improvement methods in general practice. Self-administered postal questionnaires were sent to general practitioner quality improvement leads in one county in the UK between June and December 2007. The questionnaire consisted of background information, a 12-item scale to assess leadership behaviour, a seven-dimension self-rating scale for culture of innovation and questions on current use of quality improvement tools and techniques. Sixty-three completed questionnaires (62%) were returned. Leadership behaviours were not commonly reported. Most practices reported a positive culture of innovation, featuring relationship most strongly, followed by targets and information but rated lower on other dimensions of rewards, risk and resources. There was a significant positive correlation between leadership behaviour and the culture of innovation (r = 0.57; P improvement methods were not adopted by most participating practices. Leadership behaviours were infrequently reported and this was associated with a limited culture of innovation in participating general practices. There was little use of quality improvement methods beyond clinical and significant event audit. Practices need support to enhance leadership skills, encourage innovation and develop quality improvement skills if improvements in health care are to accelerate. © 2010 Blackwell Publishing Ltd.

Improvability of assembly systems II: Improvability indicators and case study

Directory of Open Access Journals (Sweden)

S.-Y. Chiang

2000-01-01

Full Text Available Based on the performance analysis technique developed in Part I, this paper presents improvability indicators for assembly lines with unreliable machines. In particular, it shows that assembly lines are unimprovable with respect to workforce re-distribution if each buffer is, on the average, close to being half full. These lines are unimprovable with respect to buffer capacity re-distribution if each machine is starved and blocked with almost equal frequency. In addition, the paper provides indicators for identification of bottleneck machines and bottleneck buffers. Finally, the paper reports on an application of these improvability indicators in a case study at an automotive components plant.

Improved flywheel materials :

Energy Technology Data Exchange (ETDEWEB)

Boyle, Timothy J.; Bell, Nelson S; Ehlen, Mark Andrew; Anderson, Benjamin John; Miller, William Kenneth

2013-09-01

As alternative energy generating devices (i.e., solar, wind, etc) are added onto the electrical energy grid (AC grid), irregularities in the available electricity due to natural occurrences (i.e., clouds reducing solar input or wind burst increasing wind powered turbines) will be dramatically increased. Due to their almost instantaneous response, modern flywheel-based energy storage devices can act a mechanical mechanism to regulate the AC grid; however, improved spin speeds will be required to meet the necessary energy levels to balance these green energy variances. Focusing on composite flywheels, we have investigated methods for improving the spin speeds based on materials needs. The so-called composite flywheels are composed of carbon fiber (C-fiber), glass fiber, and a glue (resin) to hold them together. For this effort, we have focused on the addition of fillers to the resin in order to improve its properties. Based on the high loads required for standard meso-sized fillers, this project investigated the utility of ceramic nanofillers since they can be added at very low load levels due to their high surface area. The impact that TiO2 nanowires had on the final strength of the flywheel material was determined by a three-point-bend test. The results of the introduction of nanomaterials demonstrated an increase in strength of the flywheels C-fiber-resin moiety, with an upper limit of a 30% increase being reported. An analysis of the economic impact concerning the utilization of the nanowires was undertaken and after accounting for new-technology and additional production costs, return on improved-nanocomposite investment was approximated at 4-6% per year over the 20-year expected service life. Further, it was determined based on the 30% improvement in strength, this change may enable a 20-30% reduction in flywheel energy storage cost ($/kW-h).

School Climate Improvement Action Guide for Community Partners. School Climate Improvement Resource Package

Science.gov (United States)

National Center on Safe Supportive Learning Environments, 2017

2017-01-01

Improving school climate takes time and commitment from a variety of people in a variety of roles. This document outlines how community partners can support school climate improvements. Organizations and individuals can partner with schools in many different ways--from delivering or coordinating direct services to students and families inside or…

School Climate Improvement Action Guide for Instructional Staff. School Climate Improvement Resource Package

Science.gov (United States)

National Center on Safe Supportive Learning Environments, 2017

2017-01-01

Improving school climate takes time and commitment from a variety of people in a variety of roles. This document outlines key action steps that instructional staff--including teachers, paraprofessionals, and others in the classroom who provide instruction or assistance--can take to support school climate improvements. Key action steps are provided…

School Climate Improvement Action Guide for District Leaders. School Climate Improvement Resource Package

Science.gov (United States)

National Center on Safe Supportive Learning Environments, 2017

2017-01-01

Improving school climate takes time and commitment from a variety of people in a variety of roles. This document outlines key action steps that district leaders--including superintendents, assistant superintendents, directors of student support services, or others--can take to support school climate improvements. Key action steps are provided for…

Using implementation tools to design and conduct quality improvement projects for faster and more effective improvement.

Science.gov (United States)

Ovretveit, John; Mittman, Brian; Rubenstein, Lisa; Ganz, David A

2017-10-09

Purpose The purpose of this paper is to enable improvers to use recent knowledge from implementation science to carry out improvement changes more effectively. It also highlights the importance of converting research findings into practical tools and guidance for improvers so as to make research easier to apply in practice. Design/methodology/approach This study provides an illustration of how a quality improvement (QI) team project can make use of recent findings from implementation research so as to make their improvement changes more effective and sustainable. The guidance is based on a review and synthesis of improvement and implementation methods. Findings The paper illustrates how research can help a quality project team in the phases of problem definition and preparation, in design and planning, in implementation, and in sustaining and spreading a QI. Examples of the use of different ideas and methods are cited where they exist. Research limitations/implications The example is illustrative and there is little limited experimental evidence of whether using all the steps and tools in the one approach proposed do enable a quality team to be more effective. Evidence supporting individual guidance proposals is cited where it exists. Practical implications If the steps proposed and illustrated in the paper were followed, it is possible that quality projects could avoid waste by ensuring the conditions they need for success are in place, and sustain and spread improvement changes more effectively. Social implications More patients could benefit more quickly from more effective implementation of proven interventions. Originality/value The paper is the first to describe how improvement and implementation science can be combined in a tangible way that practical improvers can use in their projects. It shows how QI project teams can take advantage of recent advances in improvement and implementation science to make their work more effective and sustainable.

Improving operating room safety

Directory of Open Access Journals (Sweden)

Garrett Jill

2009-11-01

Full Text Available Abstract Despite the introduction of the Universal Protocol, patient safety in surgery remains a daily challenge in the operating room. This present study describes one community health system's efforts to improve operating room safety through human factors training and ultimately the development of a surgical checklist. Using a combination of formal training, local studies documenting operating room safety issues and peer to peer mentoring we were able to substantially change the culture of our operating room. Our efforts have prepared us for successfully implementing a standardized checklist to improve operating room safety throughout our entire system. Based on these findings we recommend a multimodal approach to improving operating room safety.

Improving inferior vena cava filter retrieval rates with the define, measure, analyze, improve, control methodology.

Science.gov (United States)

Sutphin, Patrick D; Reis, Stephen P; McKune, Angie; Ravanzo, Maria; Kalva, Sanjeeva P; Pillai, Anil K

2015-04-01

To design a sustainable process to improve optional inferior vena cava (IVC) filter retrieval rates based on the Define, Measure, Analyze, Improve, Control (DMAIC) methodology of the Six Sigma process improvement paradigm. DMAIC, an acronym for Define, Measure, Analyze, Improve, and Control, was employed to design and implement a quality improvement project to increase IVC filter retrieval rates at a tertiary academic hospital. Retrievable IVC filters were placed in 139 patients over a 2-year period. The baseline IVC filter retrieval rate (n = 51) was reviewed through a retrospective analysis, and two strategies were devised to improve the filter retrieval rate: (a) mailing of letters to clinicians and patients for patients who had filters placed within 8 months of implementation of the project (n = 43) and (b) a prospective automated scheduling of a clinic visit at 4 weeks after filter placement for all new patients (n = 45). The effectiveness of these strategies was assessed by measuring the filter retrieval rates and estimated increase in revenue to interventional radiology. IVC filter retrieval rates increased from a baseline of 8% to 40% with the mailing of letters and to 52% with the automated scheduling of a clinic visit 4 weeks after IVC filter placement. The estimated revenue per 100 IVC filters placed increased from $2,249 to $10,518 with the mailing of letters and to $17,022 with the automated scheduling of a clinic visit. Using the DMAIC methodology, a simple and sustainable quality improvement intervention was devised that markedly improved IVC filter retrieval rates in eligible patients. Copyright © 2015 SIR. Published by Elsevier Inc. All rights reserved.

Improving Indicators in a Brazilian Hospital Through Quality-Improvement Programs Based on STS Database Reports

Directory of Open Access Journals (Sweden)

Pedro Gabriel Melo de Barros e Silva

2015-12-01

Full Text Available ABSTRACT OBJECTIVE: To report the initial changes after quality-improvement programs based on STS-database in a Brazilian hospital. METHODS: Since 2011 a Brazilian hospital has joined STS-Database and in 2012 multifaceted actions based on STS reports were implemented aiming reductions in the time of mechanical ventilation and in the intensive care stay and also improvements in evidence-based perioperative therapies among patients who underwent coronary artery bypass graft surgeries. RESULTS: All the 947 patients submitted to coronary artery bypass graft surgeries from July 2011 to June 2014 were analyzed and there was an improvement in all the three target endpoints after the implementation of the quality-improvement program but the reduction in time on mechanical ventilation was not statistically significant after adjusting for prognostic characteristics. CONCLUSION: The initial experience with STS registry in a Brazilian hospital was associated with improvement in most of targeted quality-indicators.

Model-based software process improvement

Science.gov (United States)

Zettervall, Brenda T.

1994-01-01

The activities of a field test site for the Software Engineering Institute's software process definition project are discussed. Products tested included the improvement model itself, descriptive modeling techniques, the CMM level 2 framework document, and the use of process definition guidelines and templates. The software process improvement model represents a five stage cyclic approach for organizational process improvement. The cycles consist of the initiating, diagnosing, establishing, acting, and leveraging phases.

School Climate Improvement Action Guide for School Leaders. School Climate Improvement Resource Package

Science.gov (United States)

National Center on Safe Supportive Learning Environments, 2017

2017-01-01

Improving school climate takes time and commitment from a variety of people in a variety of roles. This document outlines key action steps that school leaders--including principals, assistant/vice principals, and building leaders--can take to support school climate improvements. Key action steps are provided for the following strategies: (1)…

Inpatient preanalytic process improvements.

Science.gov (United States)

Wagar, Elizabeth A; Phipps, Ron; Del Guidice, Robert; Middleton, Lavinia P; Bingham, John; Prejean, Cheryl; Johnson-Hamilton, Martha; Philip, Pheba; Le, Ngoc Han; Muses, Waheed

2013-12-01

Phlebotomy services are a common target for preanalytic improvements. Many new, quality engineering tools have recently been applied in clinical laboratories. However, data on relatively few projects have been published. This example describes a complete application of current, quality engineering tools to improve preanalytic phlebotomy services. To decrease the response time in the preanalytic inpatient laboratory by 25%, to reduce the number of incident reports related to preanalytic phlebotomy, and to make systematic process changes that satisfied the stakeholders. The Department of Laboratory Medicine, General Services Section, at the University of Texas MD Anderson Cancer Center (Houston) is responsible for inpatient phlebotomy in a 24-hour operation, which serves 689 inpatient beds. The study director was project director of the Division of Pathology and Laboratory Medicine's Quality Improvement Section and was assisted by 2 quality technologists and an industrial engineer from MD Anderson Office of Performance Improvement. After implementing each solution, using well-recognized, quality tools and metrics, the response time for blood collection decreased by 23%, which was close to meeting the original responsiveness goal of 25%. The response time between collection and arrival in the laboratory decreased by 8%. Applicable laboratory-related incident reports were reduced by 43%. Comprehensive application of quality tools, such as statistical control charts, Pareto diagrams, value-stream maps, process failure modes and effects analyses, fishbone diagrams, solution prioritization matrices, and customer satisfaction surveys can significantly improve preset goals for inpatient phlebotomy.

Improving hand hygiene in a paediatric hospital: a multimodal quality improvement approach.

Science.gov (United States)

Jamal, Ahmed; O'Grady, G; Harnett, E; Dalton, D; Andresen, D

2012-02-01

Effective hand hygiene has long been recognised as an important way to reduce the transmission of bacterial and viral pathogens in healthcare settings. However, many studies have shown that adherence to hand hygiene remains low, and improvement efforts have often not delivered sustainable results. The Children's Hospital at Westmead is the largest tertiary paediatric hospital in Sydney, Australia. The hospital participated in a state-wide 'Clean hands save lives' campaign which was initiated in 2006. Strong leadership, good stakeholder engagement, readily accessible alcohol-based hand rub at the point of patient care, a multifaceted education programme, monitoring of staff, adherence to recommended hand hygiene practices and contemporaneous feedback of performance data have significantly improved and maintained compliance with hand hygiene. Hand hygiene compliance has increased from 23% in 2006 to 87% in 2011 (phand hygiene has been evident in the last 4 years. A decline in a set of hospital-acquired infections (including rotavirus, multiresistant organism transmission, and nosocomial bacteraemia) has also been noted as hand hygiene rates have improved. Monthly usage of alcohol-based hand rub has increased from 16 litres/1000 bed days to 51 litres/1000 bed days during this same period. This project has delivered sustained improvement in hand hygiene compliance by establishing a framework of multimodal evidence-based strategies.

Statewide Quality Improvement Initiative to Reduce Early Elective Deliveries and Improve Birth Registry Accuracy.

Science.gov (United States)

Kaplan, Heather C; King, Eileen; White, Beth E; Ford, Susan E; Fuller, Sandra; Krew, Michael A; Marcotte, Michael P; Iams, Jay D; Bailit, Jennifer L; Bouchard, Jo M; Friar, Kelly; Lannon, Carole M

2018-04-01

To evaluate the success of a quality improvement initiative to reduce early elective deliveries at less than 39 weeks of gestation and improve birth registry data accuracy rapidly and at scale in Ohio. Between February 2013 and March 2014, participating hospitals were involved in a quality improvement initiative to reduce early elective deliveries at less than 39 weeks of gestation and improve birth registry data. This initiative was designed as a learning collaborative model (group webinars and a single face-to-face meeting) and included individual quality improvement coaching. It was implemented using a stepped wedge design with hospitals divided into three balanced groups (waves) participating in the initiative sequentially. Birth registry data were used to assess hospital rates of nonmedically indicated inductions at less than 39 weeks of gestation. Comparisons were made between groups participating and those not participating in the initiative at two time points. To measure birth registry accuracy, hospitals conducted monthly audits comparing birth registry data with the medical record. Associations were assessed using generalized linear repeated measures models accounting for time effects. Seventy of 72 (97%) eligible hospitals participated. Based on birth registry data, nonmedically indicated inductions at less than 39 weeks of gestation declined in all groups with implementation (wave 1: 6.2-3.2%, Pinitiative, they saw significant decreases in rates of early elective deliveries as compared with wave 3 (control; P=.018). All waves had significant improvement in birth registry accuracy (wave 1: 80-90%, P=.017; wave 2: 80-100%, P=.002; wave 3: 75-100%, Pinitiative enabled statewide spread of change strategies to decrease early elective deliveries and improve birth registry accuracy over 14 months and could be used for rapid dissemination of other evidence-based obstetric care practices across states or hospital systems.

SQIMSO: Quality Improvement for Small Software Organizations

OpenAIRE

Rabih Zeineddine; Nashat Mansour

2005-01-01

Software quality improvement process remains incomplete if it is not initiated and conducted through a wide improvement program that considers process quality improvement, product quality improvement and evolution of human resources. But, small software organizations are not capable of bearing the cost of establishing software process improvement programs. In this work, we propose a new software quality improvement model for small organizations, SQIMSO, based on three ...

Improved performance of the industry

International Nuclear Information System (INIS)

Jeffrey, R.

1994-01-01

The remarkable improvements in the performance of AGR stations is illustrated. The underlying reasons for this improvement are discussed, emphasizing both the operational performance factors which have led to higher sustained output and the managerial and cultural changes which have focused attention at all levels on the need to be competitive. It is concluded that the UK nuclear industry has become world class with more improvements to come, an asset to the UK. (Author)

Ergonomic Improvements for Foundries; FINAL

International Nuclear Information System (INIS)

Frank Peters; Patrick Patterson

2002-01-01

The goal of this project was to make improvements to the production systems of the steel casting industry through ergonomic improvements. Because of the wide variety of products, the wide range of product sizes, and the relatively small quantities of any particular product, manual operations remain a vital part of the production systems of the steel casting companies. Ergonomic improvements will assist the operators to more efficiently and consistently produce quality products

Improving Photosynthesis

Science.gov (United States)

Evans, John R.

2013-01-01

Photosynthesis is the basis of plant growth, and improving photosynthesis can contribute toward greater food security in the coming decades as world population increases. Multiple targets have been identified that could be manipulated to increase crop photosynthesis. The most important target is Rubisco because it catalyses both carboxylation and oxygenation reactions and the majority of responses of photosynthesis to light, CO2, and temperature are reflected in its kinetic properties. Oxygenase activity can be reduced either by concentrating CO2 around Rubisco or by modifying the kinetic properties of Rubisco. The C4 photosynthetic pathway is a CO2-concentrating mechanism that generally enables C4 plants to achieve greater efficiency in their use of light, nitrogen, and water than C3 plants. To capitalize on these advantages, attempts have been made to engineer the C4 pathway into C3 rice (Oryza sativa). A simpler approach is to transfer bicarbonate transporters from cyanobacteria into chloroplasts and prevent CO2 leakage. Recent technological breakthroughs now allow higher plant Rubisco to be engineered and assembled successfully in planta. Novel amino acid sequences can be introduced that have been impossible to reach via normal evolution, potentially enlarging the range of kinetic properties and breaking free from the constraints associated with covariation that have been observed between certain kinetic parameters. Capturing the promise of improved photosynthesis in greater yield potential will require continued efforts to improve carbon allocation within the plant as well as to maintain grain quality and resistance to disease and lodging. PMID:23812345

Improved reaction sintered silicon nitride. [protective coatings to improve oxidation resistance

Science.gov (United States)

Baumgartner, H. R.

1978-01-01

Processing treatments were applied to as-nitrided reaction sintered silicon nitride (RSSN) with the purposes of improving strength after processing to above 350 MN/m2 and improving strength after oxidation exposure. The experimental approaches are divided into three broad classifications: sintering of surface-applied powders; impregnation of solution followed by further thermal processing; and infiltration of molten silicon and subsequent carburization or nitridation of the silicon. The impregnation of RSSN with solutions of aluminum nitrate and zirconyl chloride, followed by heating at 1400-1500 C in a nitrogen atmosphere containing silicon monoxide, improved RSSN strength and oxidation resistance. The room temperature bend strength of RSSN was increased nearly fifty percent above the untreated strength with mean absolute strengths up to 420 MN/m2. Strengths of treated samples that were measured after a 12 hour oxidation exposure in air were up to 90 percent of the original as-nitrided strength, as compared to retained strengths in the range of 35 to 60 percent for untreated RSSN after the same oxidation exposure.

The Demographics and Properties of Wide-Orbit, Planetary-Mass Companions from PSF Fitting of Spitzer/IRAC Images

Science.gov (United States)

Martinez, Raquel; Kraus, Adam L.

2017-06-01

Over the past decade, a growing population of planetary-mass companions ( 100 AU) from their host stars, challenging existing models of both star and planet formation. It is unclear whether these systems represent the low-mass extreme of stellar binary formation or the high-mass and wide-orbit extreme of planet formation theories, as various proposed formation pathways inadequately explain the physical and orbital aspects of these systems. Even so, determining which scenario best reproduces the observed characteristics of the PMCs will come once a statistically robust sample of directly-imaged PMCs are found and studied.We are developing an automated pipeline to search for wide-orbit PMCs to young stars in Spitzer/IRAC images. A Markov Chain Monte Carlo (MCMC) algorithm is the backbone of our novel point spread function (PSF) subtraction routine that efficiently creates and subtracts χ2-minimizing instrumental PSFs, simultaneously measuring astrometry and infrared photometry of these systems across the four IRAC channels (3.6 μm, 4.5 μm, 5.8 μm, and 8 μm). In this work, we present the results of a Spitzer/IRAC archival imaging study of 11 young, low-mass (0.044-0.88 M⊙ K3.5-M7.5) stars known to have faint, low-mass companions in 3 nearby star-forming regions (Chameleon, Taurus, and Upper Scorpius). We characterize the systems found to have low-mass companions with non-zero [I1] - [I4] colors, potentially signifying the presence of a circum(sub?)stellar disk. Plans for future pipeline improvements and paths forward will also be discussed. Once this computational foundation is optimized, the stage is set to quickly scour the nearby star-forming regions already imaged by Spitzer, identify potential candidates for further characterization with ground- or space-based telescopes, and increase the number of widely-separated PMCs known.

Nursing Errors in Intensive Care Unit by Human Error Identification in Systems Tool: A Case Study

Directory of Open Access Journals (Sweden)

Nezamodini

2016-03-01

Full Text Available Background Although health services are designed and implemented to improve human health, the errors in health services are a very common phenomenon and even sometimes fatal in this field. Medical errors and their cost are global issues with serious consequences for the patients’ community that are preventable and require serious attention. Objectives The current study aimed to identify possible nursing errors applying human error identification in systems tool (HEIST in the intensive care units (ICUs of hospitals. Patients and Methods This descriptive research was conducted in the intensive care unit of a hospital in Khuzestan province in 2013. Data were collected through observation and interview by nine nurses in this section in a period of four months. Human error classification was based on Rose and Rose and Swain and Guttmann models. According to HEIST work sheets the guide questions were answered and error causes were identified after the determination of the type of errors. Results In total 527 errors were detected. The performing operation on the wrong path had the highest frequency which was 150, and the second rate with a frequency of 136 was doing the tasks later than the deadline. Management causes with a frequency of 451 were the first rank among identified errors. Errors mostly occurred in the system observation stage and among the performance shaping factors (PSFs, time was the most influencing factor in occurrence of human errors. Conclusions Finally, in order to prevent the occurrence and reduce the consequences of identified errors the following suggestions were proposed : appropriate training courses, applying work guidelines and monitoring their implementation, increasing the number of work shifts, hiring professional workforce, equipping work space with appropriate facilities and equipment.

Improving Health Promotion Using Quality Improvement Techniques in Australian Indigenous Primary Health Care

Science.gov (United States)

Percival, Nikki; O’Donoghue, Lynette; Lin, Vivian; Tsey, Komla; Bailie, Ross Stewart

2016-01-01

Although some areas of clinical health care are becoming adept at implementing continuous quality improvement (CQI) projects, there has been limited experimentation of CQI in health promotion. In this study, we examined the impact of a CQI intervention on health promotion in four Australian Indigenous primary health care centers. Our study objectives were to (a) describe the scope and quality of health promotion activities, (b) describe the status of health center system support for health promotion activities, and (c) introduce a CQI intervention and examine the impact on health promotion activities and health centers systems over 2 years. Baseline assessments showed suboptimal health center systems support for health promotion and significant evidence-practice gaps. After two annual CQI cycles, there were improvements in staff understanding of health promotion and systems for planning and documenting health promotion activities had been introduced. Actions to improve best practice health promotion, such as community engagement and intersectoral partnerships, were inhibited by the way health center systems were organized, predominately to support clinical and curative services. These findings suggest that CQI can improve the delivery of evidence-based health promotion by engaging front line health practitioners in decision-making processes about the design/redesign of health center systems to support the delivery of best practice health promotion. However, further and sustained improvements in health promotion will require broader engagement of management, senior staff, and members of the local community to address organizational and policy level barriers. PMID:27066470

Improving health promotion using quality improvement techniques in Australian Indigenous primary health care

Directory of Open Access Journals (Sweden)

Nikki ePercival

2016-03-01

Full Text Available While some areas of clinical health care are becoming adept at implementing continuous quality improvement (CQI projects, there has been limited experimentation of CQI in health promotion. In this study, we examined the impact of a CQI intervention on health promotion in four Australian Indigenous primary health care centres. Our study objectives were to: (a describe the scope and quality of health promotion activities; (b describe the status of health centre system support for health promotion activities; and (c introduce a CQI intervention and examine the impact on health promotion activities and health centres systems over two years. Baseline assessments showed sub-optimal health centre systems support for health promotion and significant evidence-practice gaps. After two annual CQI cycles, there were improvements in staff understanding of health promotion and systems for planning and documenting health promotion activities had been introduced. Actions to improve best practice health promotion, such as community engagement and intersectoral partnerships, were inhibited by the way health centre systems were organized, predominately to support clinical and curative services. These findings suggest that CQI can improve the delivery of evidence based health promotion by engaging front line health practitioners in decision making processes about the design/redesign of health centre systems to support the delivery of best practice health promotion. However, further and sustained improvements in health promotion will require broader engagement of management, senior staff and members of the local community to address organisational and policy level barriers.

Improving Health Promotion Using Quality Improvement Techniques in Australian Indigenous Primary Health Care.

Science.gov (United States)

Percival, Nikki; O'Donoghue, Lynette; Lin, Vivian; Tsey, Komla; Bailie, Ross Stewart

2016-01-01

Although some areas of clinical health care are becoming adept at implementing continuous quality improvement (CQI) projects, there has been limited experimentation of CQI in health promotion. In this study, we examined the impact of a CQI intervention on health promotion in four Australian Indigenous primary health care centers. Our study objectives were to (a) describe the scope and quality of health promotion activities, (b) describe the status of health center system support for health promotion activities, and (c) introduce a CQI intervention and examine the impact on health promotion activities and health centers systems over 2 years. Baseline assessments showed suboptimal health center systems support for health promotion and significant evidence-practice gaps. After two annual CQI cycles, there were improvements in staff understanding of health promotion and systems for planning and documenting health promotion activities had been introduced. Actions to improve best practice health promotion, such as community engagement and intersectoral partnerships, were inhibited by the way health center systems were organized, predominately to support clinical and curative services. These findings suggest that CQI can improve the delivery of evidence-based health promotion by engaging front line health practitioners in decision-making processes about the design/redesign of health center systems to support the delivery of best practice health promotion. However, further and sustained improvements in health promotion will require broader engagement of management, senior staff, and members of the local community to address organizational and policy level barriers.

Identifying continuous quality improvement publications: what makes an improvement intervention 'CQI'?

Science.gov (United States)

O'Neill, Sean M; Hempel, Susanne; Lim, Yee-Wei; Danz, Marjorie S; Foy, Robbie; Suttorp, Marika J; Shekelle, Paul G; Rubenstein, Lisa V

2011-12-01

The term continuous quality improvement (CQI) is often used to refer to a method for improving care, but no consensus statement exists on the definition of CQI. Evidence reviews are critical for advancing science, and depend on reliable definitions for article selection. As a preliminary step towards improving CQI evidence reviews, this study aimed to use expert panel methods to identify key CQI definitional features and develop and test a screening instrument for reliably identifying articles with the key features. We used a previously published method to identify 106 articles meeting the general definition of a quality improvement intervention (QII) from 9427 electronically identified articles from PubMed. Two raters then applied a six-item CQI screen to the 106 articles. Per cent agreement ranged from 55.7% to 75.5% for the six items, and reviewer-adjusted intra-class correlation ranged from 0.43 to 0.62. 'Feedback of systematically collected data' was the most common feature (64%), followed by being at least 'somewhat' adapted to local conditions (61%), feedback at meetings involving participant leaders (46%), using an iterative development process (40%), being at least 'somewhat' data driven (34%), and using a recognised change method (28%). All six features were present in 14.2% of QII articles. We conclude that CQI features can be extracted from QII articles with reasonable reliability, but only a small proportion of QII articles include all features. Further consensus development is needed to support meaningful use of the term CQI for scientific communication.

Status of the PSR improvement program

International Nuclear Information System (INIS)

Macek, R.J.; Fitzgerald, D.H.; Hoehn, M.V.; Ryder, R.D.; York, R.L.

1993-01-01

A program of improvements to increase intensity and improve reliability of the Los Alamos Proton Storage Ring (PSR) has been under way for several years. Reduction of stored beam loss rates by a factor of 4.6 since 1987 through exploitation of H 0 injection has allowed the average intensity to increase by a factor of two to 75μA. Reliability of the PSR and associated beam delivery systems has been improved by extensive rework of numerous subsystems. Radiation protection has been improved by additional shielding of Line D and extensive use of relatively fail-safe radiation detectors incorporated into an improved radiation security system

Capital Improvements Business Line

Science.gov (United States)

2012-08-08

NAVFAC Southwest Dan Waid Program & Business Mgmt NAVFAC SW Capital Improvements Business Line NAVFAC SW 8 August 2012 1 Report...REPORT TYPE 3. DATES COVERED 00-00-2012 to 00-00-2012 4. TITLE AND SUBTITLE Capital Improvements Business Line 5a. CONTRACT NUMBER 5b. GRANT...AVAILABILITY STATEMENT Approved for public release; distribution unlimited 13. SUPPLEMENTARY NOTES Presented at the 2012 Navy Gold Coast Small Business

How to Begin a Quality Improvement Project.

Science.gov (United States)

Silver, Samuel A; Harel, Ziv; McQuillan, Rory; Weizman, Adam V; Thomas, Alison; Chertow, Glenn M; Nesrallah, Gihad; Bell, Chaim M; Chan, Christopher T

2016-05-06

Quality improvement involves a combined effort among health care staff and stakeholders to diagnose and treat problems in the health care system. However, health care professionals often lack training in quality improvement methods, which makes it challenging to participate in improvement efforts. This article familiarizes health care professionals with how to begin a quality improvement project. The initial steps involve forming an improvement team that possesses expertise in the quality of care problem, leadership, and change management. Stakeholder mapping and analysis are useful tools at this stage, and these are reviewed to help identify individuals who might have a vested interest in the project. Physician engagement is a particularly important component of project success, and the knowledge that patients/caregivers can offer as members of a quality improvement team should not be overlooked. After a team is formed, an improvement framework helps to organize the scientific process of system change. Common quality improvement frameworks include Six Sigma, Lean, and the Model for Improvement. These models are contrasted, with a focus on the Model for Improvement, because it is widely used and applicable to a variety of quality of care problems without advanced training. It involves three steps: setting aims to focus improvement, choosing a balanced set of measures to determine if improvement occurs, and testing new ideas to change the current process. These new ideas are evaluated using Plan-Do-Study-Act cycles, where knowledge is gained by testing changes and reflecting on their effect. To show the real world utility of the quality improvement methods discussed, they are applied to a hypothetical quality improvement initiative that aims to promote home dialysis (home hemodialysis and peritoneal dialysis). This provides an example that kidney health care professionals can use to begin their own quality improvement projects. Copyright © 2016 by the American

Adaptation improves face trustworthiness discrimination

Directory of Open Access Journals (Sweden)

Bruce D Keefe

2013-06-01

Full Text Available Adaptation to facial characteristics, such as gender and viewpoint, has been shown to both bias our perception of faces and improve facial discrimination. In this study, we examined whether adapting to two levels of face trustworthiness improved sensitivity around the adapted level. Facial trustworthiness was manipulated by morphing between trustworthy and untrustworthy prototypes, each generated by morphing eight trustworthy and eight untrustworthy faces respectively. In the first experiment, just-noticeable differences (JNDs were calculated for an untrustworthy face after participants adapted to an untrustworthy face, a trustworthy face, or did not adapt. In the second experiment, the three conditions were identical, except that JNDs were calculated for a trustworthy face. In the third experiment we examined whether adapting to an untrustworthy male face improved discrimination to an untrustworthy female face. In all experiments, participants completed a two-interval forced-choice adaptive staircase procedure, in which they judged which face was more untrustworthy. JNDs were derived from a psychometric function fitted to the data. Adaptation improved sensitivity to faces conveying the same level of trustworthiness when compared to no adaptation. When adapting to and discriminating around a different level of face trustworthiness there was no improvement in sensitivity and JNDs were equivalent to those in the no adaptation condition. The improvement in sensitivity was found to occur even when adapting to a face with different gender and identity. These results suggest that adaptation to facial trustworthiness can selectively enhance mechanisms underlying the coding of facial trustworthiness to improve perceptual sensitivity. These findings have implications for the role of our visual experience in the decisions we make about the trustworthiness of other individuals.

Improving Family Communication.

Science.gov (United States)

Medrano, Vilma; Bonilla, Gladys; Hernández, Ericka; Romanjek, Mariana Harnecker; Gómez, Adriana; Hernández, Jasón; Reyes, Marcela Ríos; Lindenberg, Cathy Strachan

2017-03-01

TeenSmart International harnesses the power and flexibility of technology to empower youth to take personal responsibility for their health and lifestyle choices. Access to the Internet via mobile phones is often cheaper than paying to connect to a wired broadband service, and in rural areas, mobile networks may be the only means of accessing the Internet. This study assessed the feasibility, acceptability, and impact of "cues to action" or brief motivating cell phone text messages to improve adolescent family communication and relationships. A quasi-experimental design using a voluntary sample of 100 Nicaraguan youth at high risk for poor family communication participated. Pre- and posttest quantitative measures using Student t statistical analysis, a focus group, and a participant testimony provided the evaluation evidence. Findings suggest that there are economic and motivational barriers to the use of text messages, but when barriers are eliminated, the behavioral results are positive. Youth who received two weekly text messages over a 6-month period demonstrated statistically significant improvements in family communication perceptions, attitudes, and behaviors, strengthening their family communications and relationships. Brief and personalized text messaging "cues to action" may be a cost-effective intervention to improve adolescent healthy lifestyle behaviors.

Improving patient handover between teams using a business improvement model: PDSA cycle.

Science.gov (United States)

Luther, Vishal; Hammersley, Daniel; Chekairi, Ahmed

2014-01-01

Medical admission units are continuously under pressure to move patients off the unit to outlying medical wards and allow for new admissions. In a typical district general hospital, doctors working in these medical wards reported that, on average, three patients each week arrived from the medical admission unit before any handover was received, and a further two patients arrived without any handover at all. A quality improvement project was therefore conducted using a 'Plan, Do, Study, Act' cycle model for improvement to address this issue. P - Plan: as there was no framework to support doctors with handover, a series of standard handover procedures were designed. D - Do: the procedures were disseminated to all staff, and championed by key stakeholders, including the clinical director and matron of the medical admission unit. S - STUDY: Measurements were repeated 3 months later and showed no change in the primary end points. A - ACT: The post take ward round sheet was redesigned, creating a checkbox for a medical admission unit doctor to document that handover had occurred. Nursing staff were prohibited from moving the patient off the ward until this had been completed. This later evolved into a separate handover sheet. Six months later, a repeat study revealed that only one patient each week was arriving before or without a verbal handover. Using a 'Plan, Do, Study, Act' business improvement tool helped to improve patient care.

Productivity quality improvement at UNC Geotech

International Nuclear Information System (INIS)

Jenkins, W.A.

1987-01-01

The program to improve productivity is presented in a series of view graphs. Key elements of the program are: CEO leadership and commitment; measurable improvements; specific annual goals; system for sharing benefits of improvements; practical training for employees; and intent to institutionalize

Improving requirements engineering by artefact orientation

NARCIS (Netherlands)

Méndez Fernández, Daniel; Wieringa, Roelf J.

2013-01-01

The importance of continuously improving requirements engineering (RE) has been recognised for many years. Similar to available software process improvement approaches, most RE improvement approaches focus on a normative and solution-driven assessment of companies rather than on a problem-driven RE

Turn-around improvements

International Nuclear Information System (INIS)

Redaelli, S.; Venturini Delsolaro, W.

2012-01-01

An efficient turn-around will be an important parameter for the integrated luminosity performance at LHC in 2012, when an operation with steady beam parameters and machine configuration will be achieved at the beginning of the run. Improvements of the operational cycle were already put successfully in place after the 2010 experience but additional ways to reduce the time required to setup collisions are possible. In this paper, the 2011 turn-around performance is reviewed and the benefits of the improvements from 2010 are presented. Phases of the operational cycle when further amelioration is possible are discussed and some proposal for a faster turn-around in 2012 are outlined. (authors)

Three success factors for continual improvement in healthcare: an analysis of the reports of improvement team members.

Science.gov (United States)

Brandrud, Aleidis Skard; Schreiner, Ada; Hjortdahl, Per; Helljesen, Gro Sævil; Nyen, Bjørnar; Nelson, Eugene C

2011-03-01

The objectives of the Breakthrough Series Collaborative are to close the gap between what we know and what we do, and to contribute to continuous quality improvement (CQI) of healthcare through collaborative learning. The improvement efforts are guided by a systematic approach, combining professional and improvement knowledge. To explore what the improvement teams have learnt from participating in the collaborative and from dealing with promoting and inhibiting factors encountered. Qualitative interviews with 19 team members were conducted in four focus groups, using the Critical Incident Technique. A critical incident is one that makes significant contributions, either positively or negatively, to an activity. The elements of a culture of improvement are revealed by the critical incidents, and reflect the eight domains of knowledge, as a product of collaborative learning. The improvement knowledge and skills of individuals are important elements, but not enough to achieve sustainable changes. 90% of the material reflects the need for a system of CQI to solve the problems that organisations experience in trying to make lasting improvements. A pattern of three success factors for CQI emerges: (1) continuous and reliable information, including measurement, about best and current practice; (2) engagement of everybody in all phases of the improvement work: the patient and family, the leadership, the professional environment and the staff; and (3) an infrastructure based on improvement knowledge, with multidisciplinary teams, available coaching, learning systems and sustainability systems.

Historical Improvement in Speed Skating Economy.

Science.gov (United States)

Noordhof, Dionne A; van Tok, Elmy; Joosten, Florentine S J G M; Hettinga, Florentina J; Hoozemans, Marco J M; Foster, Carl; de Koning, Jos J

2017-02-01

Half the improvement in 1500-m speed-skating world records can be explained by technological innovations and the other half by athletic improvement. It is hypothesized that improved skating economy is accountable for much of the athletic improvement. To determine skating economy in contemporary athletes and to evaluate the change in economy over the years. Contemporary skaters of the Dutch national junior team (n = 8) skated 3 bouts of 6 laps at submaximal velocity, from which skating economy was calculated (in mL O 2 ・ kg -1 ・ km -1 ). A literature search provided historic data on skating velocity and submaximal V̇O 2 (in mL ・ kg -1 ・ min -1 ), from which skating economy was determined. The association between year and skating economy was determined using linear-regression analysis. Correcting the change in economy for technological innovations resulted in an estimate of the association between year and economy due to athletic improvement. A mean (± SD) skating economy of 73.4 ± 6.4 mL O 2 ・ kg -1 ・ km -1 was found in contemporary athletes. Skating economy improved significantly over the historical time frame (-0.57 mL O 2 ・ kg -1 ・ km -1 ・ y -1 , 95% confidence interval [-0.84, -0.31]). In the final regression model for the klapskate era, with altitude as confounder, skating economy improved with a nonsignificant -0.58 mL O 2 ・ kg -1 ・ km -1 ・ y -1 ([-1.19, 0.035]). Skating economy was 73.4 ± 6.4 mL O 2 ・ kg -1 ・ km -1 in contemporary athletes and improved over the past ~50 y. The association between year and skating economy due to athletic improvement, for the klapskate era, approached significance, suggesting a possible improvement in economy over these years.

Direct Liquid Evaporation Chemical Vapor Deposition(DLE-CVD) of Nickel, Manganese and Copper-Based Thin Films for Interconnects in Three-Dimensional Microelectronic Systems

OpenAIRE

Li, Kecheng

2016-01-01

Electrical interconnects are an intrinsic part of any electronic system. These interconnects have to perform reliably under a wide range of environmental conditions and survive stresses induced from thermal, mechanical, corrosive and electrical factors. Semiconductor technology is predominantly planar in nature, posing a severe limitation to the degree of device integrations into systems such as micro-processors or memories. 3D transistor FinFET (Fin type Field Effect Transistors) has been us...

Účtování finančních investic dle ruských účetních standardů

OpenAIRE

Filippova, Elena

2017-01-01

This bachelor thesis focuses on the accounting principles for financial investments under Russian accounting standards. The theoretical part defines financial investments for the accounting purposes, on the process of their recognition, the initial and subsequent measurement, the decommissioning of these assets. The practical part consists of a short financial analysis of the "Gazprom" corporation and the detailed study of its accounting policy. In conclusion, it occurs that the company "Gazp...

The Gains from Improved Market Efficiency

DEFF Research Database (Denmark)

Persson, Karl Gunnar; Ejrnæs, Mette

faster, violations of the law of one price become smaller and hence less persistent. There were also significant gains from improved market efficiency but that improvement took place after the information ‘regime’ shifted from pre-telegraphic communication to a regime with swift transmission...... of information in an era which developed a sophisticated commercial press and telegraphic communication. Improved market efficiency probably stimulated trade more than falling transport costs......This paper looks at the gains from improved market efficiency in long-distance grain trade in the second half of the 19th century when violations of the law of one price were reduced due to improved information transmission. Two markets, a major export centre, Chicago, and a major importer...

Evaluating Fidelity to a Modified NIATx Process Improvement Strategy for Improving HIV Services in Correctional Facilities.

Science.gov (United States)

Pankow, Jennifer; Willett, Jennifer; Yang, Yang; Swan, Holly; Dembo, Richard; Burdon, William M; Patterson, Yvonne; Pearson, Frank S; Belenko, Steven; Frisman, Linda K

2018-04-01

In a study aimed at improving the quality of HIV services for inmates, an organizational process improvement strategy using change teams was tested in 14 correctional facilities in 8 US states and Puerto Rico. Data to examine fidelity to the process improvement strategy consisted of quantitative ratings of the structural and process components of the strategy and qualitative notes that explicate challenges in maintaining fidelity to the strategy. Fidelity challenges included (1) lack of communication and leadership within change teams, (2) instability in team membership, and (3) issues with data utilization in decision-making to implement improvements to services delivery.

Effect of different sol concentrations on the properties of nanocrystalline ZnO thin films grown on FTO substrates by sol-gel spin-coating

International Nuclear Information System (INIS)

Kim, Ikhyun; Kim, Younggyu; Nam, Giwoong; Kim, Dongwan; Park, Minju; Kim, Haeun; Lee, Wookbin; Leem, Jaeyoung; Kim, Jongsu; Kim, Jin Soo

2014-01-01

Nanocrystalline ZnO thin films grown on fluorine-doped tinoxide (FTO) substrates were fabricated using the spin-coating method. The structural and the optical properties of the ZnO thin films prepared using different sol concentrations were investigated by using field-emission scanning electron microscopy (FE-SEM), X-ray diffractometry (XRD), photoluminescence (PL) measurements, and ultraviolet-visible (UV-vis) spectrometry. The surface morphology of the ZnO thin films, as observed in the SEM images, exhibited a mountain-chain structure. XRD results indicated that the thin films were preferentially orientated along the direction of the c-axis and that the grain size of the ZnO thin films increased with increasing sol concentration. The PL spectra showed a strong ultraviolet emission peak at 3.22 eV and a broad orange emission peak at 2.0 eV. The intensities of deep-level emission (DLE) gradually increased with increasing sol concentration from 0.4 to 1.0 M. The transmittance spectra of the ZnO thin films showed that the ZnO thin films were transparent (∼85%) in the visible region and exhibited sharp absorption edges at 375 nm. Thus, The Urbach energy of ZnO thin films decreased with increasing sol concentration.

Evaluation of saddle and driving aptitudes in Monterufoli pony

Directory of Open Access Journals (Sweden)

Riccardo Bozzi

2010-01-01

Full Text Available The Monterufoli pony is an endangered Tuscan breed. In the 80’s began a project for the conservation of the breed and at present there are roughly 200 individuals. The equine was once utilized for saddle and driving and this study deals with the training for these two aptitudes. The mor- phologic type of the pony seems suited for saddle, in particular for children and beginners, and driving. The ponies showed developed chest, strong legs with short shanks: all these characters were useful for trot and driving. In this trial 3-4 years old never tamed Monterufoli ponies were opportunely choose and subsequently trained for saddle and driving. The ponies were submitted to the “aptitude test” for the two aptitudes and the results were good both for practical and character sides. The marks for sad- dle and driving were 8.16 and 8.06 respectively. Also the 3 ponies showed good results for the Aptitude Index: 7.60, 7.87 and 7.89. The results of the trial showed the excellent ability of the Monterufoli pony for saddle and driving. The good results of the test are important for the diffusion of the breed in the territory and in particular in horse centres and in equestrian tourism sites.

Stereocomplex-Reinforced PEGylated Polylactide Micelle for Optimized Drug Delivery

Directory of Open Access Journals (Sweden)

Chunsheng Feng

2016-04-01

Full Text Available The instability of PEGylated polylactide micelles is a challenge for drug delivery. Stereocomplex interaction between racemic polylactide chains with different configurations provides an effective strategy to enhance the stability of micelles as the nanocarriers of drugs. In this work, a stereocomplex micelle (SCM self-assembled from the amphiphilic triblock copolymers comprising poly(ethylene glycol (PEG, and dextrorotatory and levorotatory polylactides (PDLA and PLLA was applied for efficient drug delivery. The spherical SCM showed the smallest scale and the lowest critical micelle concentration (CMC than the micelles with single components attributed to the stereocomplex interaction between PDLA and PLLA. 10-Hydroxycamptothecin (HCPT as a model antitumor drug was loaded into micelles. Compared with the loading micelles from individual PDLA and PLLA, the HCPT-loaded SCM exhibited the highest drug loading efficiency (DLE and the slowest drug release in phosphate-buffered saline (PBS at pH 7.4, indicating its enhanced stability in circulation. More fascinatingly, the laden SCM was demonstrated to have the highest cellular uptake of HCPT and suppress malignant cells most effectively in comparison to the HCPT-loaded micelles from single copolymer. In summary, the stereocomplex-enhanced PLA–PEG–PLA micelle may be promising for optimized drug delivery in the clinic.

Improving Employees' Safety Awareness in Healthcare Organizations Using the DMAIC Quality Improvement Approach.

Science.gov (United States)

Momani, Amer; Hirzallah, Muʼath; Mumani, Ahmad

Occupational injuries and illnesses in healthcare can cause great human suffering, incur high cost, and have an adverse impact on the quality of patient care. One of the most effective solutions for addressing health and safety issues and improving decisions at the point of care rests in raising employees' safety awareness to recognize, avoid, or respond to potential problems before they arise. In this article, the DMAIC Six Sigma model (Define, Measure, Analyze, Improve, Control) is used as a systematic program to measure, improve, and sustain employees' safety awareness in healthcare organizations. We report on a case study using the model, which was implemented and validated at a local hospital. First, the occupational health and safety knowledge that each job requires was identified. Next, the degree of competence of jobholders to meet these requirements was assessed. Based on the assessment, different awareness-raising efforts were proposed and implemented. The results showed significant improvement in the overall safety awareness compliance assessed: from 74.2% to 84.4% (p < .001) after the intervention. The proposed model ensures that the organization's awareness-raising efforts serve its actual needs and produce optimized and sustained results that eventually lead to safer healthcare service.

Human reliability analysis approach to level 1 PSA - shutdown and low power operation of Mochovce NPP, Unit 1, Slovakia

International Nuclear Information System (INIS)

Stojka, Tibor; Holy, Jaroslav

2003-01-01

The paper presents general approach, used methods and form of documentation of the results as have been applied within the Human Reliability Analysis (HRA) task of the shutdown and low power PSA (SPSA) study for Mochovce nuclear power plant, Unit 1, Slovakia. The paper describes main goals of the HRA task within the SPSA project, applied methods and data sources. Basic steps of the HRA task and human errors (HE) classification are also specified in its first part. The main part of the paper deals with pre-initiator human errors, human-induced initiators and response to initiator human errors. Since the expert judgment method (SLIM) was used for the last type of human errors probability assessment, also related activities are described including preparation works (performance shaping factors (PSFs) selection, development of PSF classification tables, preparation of aid tools for interview with plant experts), qualitative analysis (sources of information and basic steps) and quantitative analysis itself (human errors classification for final quantification including criteria used for the classification, description of structure of the spreadsheet used for quantification and treatment with dependencies). The last part of the paper describes form of documentation of the final results and provides some findings. (author)

Performance Evaluation of Large Aperture 'Polished Panel' Optical Receivers Based on Experimental Data

Science.gov (United States)

Vilnrotter, Victor

2013-01-01

Recent interest in hybrid RF/Optical communications has led to the development and installation of a "polished-panel" optical receiver evaluation assembly on the 34-meter research antenna at Deep-Space Station 13 (DSS-13) at NASA's Goldstone Communications Complex. The test setup consists of a custom aluminum panel polished to optical smoothness, and a large-sensor CCD camera designed to image the point-spread function (PSF) generated by the polished aluminum panel. Extensive data has been obtained via realtime tracking and imaging of planets and stars at DSS-13. Both "on-source" and "off-source" data were recorded at various elevations, enabling the development of realistic simulations and analytic models to help determine the performance of future deep-space communications systems operating with on-off keying (OOK) or pulse-position-modulated (PPM) signaling formats with photon-counting detection, and compared with the ultimate quantum bound on detection performance for these modulations. Experimentally determined PSFs were scaled to provide realistic signal-distributions across a photon-counting detector array when a pulse is received, and uncoded as well as block-coded performance analyzed and evaluated for a well-known class of block codes.

Dissecting Solidago canadensis-soil feedback in its real invasion.

Science.gov (United States)

Dong, Li-Jia; Yang, Jian-Xia; Yu, Hong-Wei; He, Wei-Ming

2017-04-01

The importance of plant-soil feedback (PSF) has long been recognized, but the current knowledge on PSF patterns and the related mechanisms mainly stems from laboratory experiments. We aimed at addressing PSF effects on community performance and their determinants using an invasive forb Solidago canadensis . To do so, we surveyed 81 pairs of invaded versus uninvaded plots, collected soil samples from these pairwise plots, and performed an experiment with microcosm plant communities. The magnitudes of conditioning soil abiotic properties and soil biotic properties by S. canadensis were similar, but the direction was opposite; altered abiotic and biotic properties influenced the production of subsequent S. canadensis communities and its abundance similarly. These processes shaped neutral S. canadensis -soil feedback effects at the community level. Additionally, the relative dominance of S. canadensis increased with its ability of competitive suppression in the absence and presence of S. canadensis -soil feedbacks, and S. canadensis -induced decreases in native plant species did not alter soil properties directly. These findings provide a basis for understanding PSF effects and the related mechanisms in the field conditions and also highlight the importance of considering PSFs holistically.

The Snapshot A Star SurveY (SASSY)

Science.gov (United States)

Garani, Jasmine I.; Nielsen, Eric; Marchis, Franck; Liu, Michael C.; Macintosh, Bruce; Rajan, Abhijith; De Rosa, Robert J.; Jinfei Wang, Jason; Esposito, Thomas M.; Best, William M. J.; Bowler, Brendan; Dupuy, Trent; Ruffio, Jean-Baptiste

2018-01-01

The Snapshot A Star Survey (SASSY) is an adaptive optics survey conducted using NIRC2 on the Keck II telescope to search for young, self-luminous planets and brown dwarfs (M > 5MJup) around high mass stars (M > 1.5 M⊙). We present the results of a custom data reduction pipeline developed for the coronagraphic observations of our 200 target stars. Our data analysis method includes basic near infrared data processing (flat-field correction, bad pixel removal, distortion correction) as well as performing PSF subtraction through a Reference Differential Imaging algorithm based on a library of PSFs derived from the observations using the pyKLIP routine. We present the results from the pipeline of a few stars from the survey with analysis of candidate companions. SASSY is sensitive to companions 600,000 times fainter than the host star withint the inner few arcseconds, allowing us to detect companions with masses ~8MJup at age 110 Myr. This work was supported by the Leadership Alliance's Summer Research Early Identification Program at Stanford University, the NSF REU program at the SETI Institute and NASA grant NNX14AJ80G.

Study on relationship of performance shaping factor in human error probability with prevalent stress of PUSPATI TRIGA reactor operators

Science.gov (United States)

Rahim, Ahmad Nabil Bin Ab; Mohamed, Faizal; Farid, Mohd Fairus Abdul; Fazli Zakaria, Mohd; Sangau Ligam, Alfred; Ramli, Nurhayati Binti

2018-01-01

Human factor can be affected by prevalence stress measured using Depression, Anxiety and Stress Scale (DASS). From the respondents feedback can be summarized that the main factor causes the highest prevalence stress is due to the working conditions that require operators to handle critical situation and make a prompt critical decisions. The relationship between the prevalence stress and performance shaping factors found that PSFFitness and PSFWork Process showed positive Pearson’s Correlation with the score of .763 and .826 while the level of significance, p = .028 and p = .012. These positive correlations with good significant values between prevalence stress and human performance shaping factor (PSF) related to fitness, work processes and procedures. The higher the stress level of the respondents, the higher the score of selected for the PSFs. This is due to the higher levels of stress lead to deteriorating physical health and cognitive also worsened. In addition, the lack of understanding in the work procedures can also be a factor that causes a growing stress. The higher these values will lead to the higher the probabilities of human error occur. Thus, monitoring the level of stress among operators RTP is important to ensure the safety of RTP.

Method for estimating modulation transfer function from sample images.

Science.gov (United States)

Saiga, Rino; Takeuchi, Akihisa; Uesugi, Kentaro; Terada, Yasuko; Suzuki, Yoshio; Mizutani, Ryuta

2018-02-01

The modulation transfer function (MTF) represents the frequency domain response of imaging modalities. Here, we report a method for estimating the MTF from sample images. Test images were generated from a number of images, including those taken with an electron microscope and with an observation satellite. These original images were convolved with point spread functions (PSFs) including those of circular apertures. The resultant test images were subjected to a Fourier transformation. The logarithm of the squared norm of the Fourier transform was plotted against the squared distance from the origin. Linear correlations were observed in the logarithmic plots, indicating that the PSF of the test images can be approximated with a Gaussian. The MTF was then calculated from the Gaussian-approximated PSF. The obtained MTF closely coincided with the MTF predicted from the original PSF. The MTF of an x-ray microtomographic section of a fly brain was also estimated with this method. The obtained MTF showed good agreement with the MTF determined from an edge profile of an aluminum test object. We suggest that this approach is an alternative way of estimating the MTF, independently of the image type. Copyright © 2017 Elsevier Ltd. All rights reserved.

Human errors during the simulations of an SGTR scenario: Application of the HERA system

International Nuclear Information System (INIS)

Jung, Won Dea; Whaley, April M.; Hallbert, Bruce P.

2009-01-01

Due to the need of data for a Human Reliability Analysis (HRA), a number of data collection efforts have been undertaken in several different organizations. As a part of this effort, a human error analysis that focused on a set of simulator records on a Steam Generator Tube Rupture (SGTR) scenario was performed by using the Human Event Repository and Analysis (HERA) system. This paper summarizes the process and results of the HERA analysis, including discussions about the usability of the HERA system for a human error analysis of simulator data. Five simulated records of an SGTR scenario were analyzed with the HERA analysis process in order to scrutinize the causes and mechanisms of the human related events. From this study, the authors confirmed that the HERA was a serviceable system that can analyze human performance qualitatively from simulator data. It was possible to identify the human related events in the simulator data that affected the system safety not only negatively but also positively. It was also possible to scrutinize the Performance Shaping Factors (PSFs) and the relevant contributory factors with regard to each identified human event

Tomographic PIV: particles versus blobs

International Nuclear Information System (INIS)

Champagnat, Frédéric; Cornic, Philippe; Besnerais, Guy Le; Plyer, Aurélien; Cheminet, Adam; Leclaire, Benjamin

2014-01-01

We present an alternative approach to tomographic particle image velocimetry (tomo-PIV) that seeks to recover nearly single voxel particles rather than blobs of extended size. The baseline of our approach is a particle-based representation of image data. An appropriate discretization of this representation yields an original linear forward model with a weight matrix built with specific samples of the system’s point spread function (PSF). Such an approach requires only a few voxels to explain the image appearance, therefore it favors much more sparsely reconstructed volumes than classic tomo-PIV. The proposed forward model is general and flexible and can be embedded in a classical multiplicative algebraic reconstruction technique (MART) or a simultaneous multiplicative algebraic reconstruction technique (SMART) inversion procedure. We show, using synthetic PIV images and by way of a large exploration of the generating conditions and a variety of performance metrics, that the model leads to better results than the classical tomo-PIV approach, in particular in the case of seeding densities greater than 0.06 particles per pixel and of PSFs characterized by a standard deviation larger than 0.8 pixels. (paper)

A preliminary study comparing the use of cervical/upper thoracic mobilization and manipulation for individuals with mechanical neck pain.

Science.gov (United States)

Griswold, David; Learman, Ken; O'Halloran, Bryan; Cleland, Josh

2015-05-01

Neck pain is routinely managed using manual therapy (MT) to the cervical and thoracic spines. While both mobilizations and manipulations to these areas have been shown to reduce neck pain, increase cervical range of motion, and reduce disability, the most effective option remains elusive. The purpose of this preliminary trial was to compare the pragmatic use of cervical and thoracic mobilizations vs. manipulation for mechanical neck pain. This trial included 20 patients with mechanical neck pain. Each patient was randomized to receive either mobilization or manipulation to both the cervical and thoracic spines during their plan of care. Within-group analyses were made with Wilcoxon signed-rank tests and between-group analyses were made with Mann-Whitney U. There were no between-group differences for any of the dependent variables including cervical active range of motion (CAROM) (P = 0.18), deep cervical flexion (DCF) endurance (P = 0.06), numerical pain rating scale (NPRS) (P = 0.26), the neck disability index (NDI, P = 0.33), patient-specific functional scale (PSFS, P = 0.20), or the global rating of change (GROC) scale (P = 0.94). Within-group results were significant for all outcome variables (Ppain.

Exercises to Improve Gait Abnormalities

Science.gov (United States)

... Articles Directories Videos Resources Contact Exercises to Improve Gait Abnormalities Home » Article Categories » Exercise and Fitness Font Size: A A A A Exercises to Improve Gait Abnormalities Next Page The manner of how a ...

Benchmarking for Cost Improvement. Final report

Energy Technology Data Exchange (ETDEWEB)

1993-09-01

The US Department of Energy`s (DOE) Office of Environmental Restoration and Waste Management (EM) conducted the Benchmarking for Cost Improvement initiative with three objectives: Pilot test benchmarking as an EM cost improvement tool; identify areas for cost improvement and recommend actions to address these areas; provide a framework for future cost improvement. The benchmarking initiative featured the use of four principal methods (program classification, nationwide cost improvement survey, paired cost comparison and component benchmarking). Interested parties contributed during both the design and execution phases. The benchmarking initiative was conducted on an accelerated basis. Of necessity, it considered only a limited set of data that may not be fully representative of the diverse and complex conditions found at the many DOE installations. The initiative generated preliminary data about cost differences and it found a high degree of convergence on several issues. Based on this convergence, the report recommends cost improvement strategies and actions. This report describes the steps taken as part of the benchmarking initiative and discusses the findings and recommended actions for achieving cost improvement. The results and summary recommendations, reported below, are organized by the study objectives.

Memory reactivation improves visual perception.

Science.gov (United States)

Amar-Halpert, Rotem; Laor-Maayany, Rony; Nemni, Shlomi; Rosenblatt, Jonathan D; Censor, Nitzan

2017-10-01

Human perception thresholds can improve through learning. Here we report findings challenging the fundamental 'practice makes perfect' basis of procedural learning theory, showing that brief reactivations of encoded visual memories are sufficient to improve perceptual discrimination thresholds. Learning was comparable to standard practice-induced learning and was not due to short training per se, nor to an epiphenomenon of primed retrieval enhancement. The results demonstrate that basic perceptual functions can be substantially improved by memory reactivation, supporting a new account of perceptual learning dynamics.

Teacher Research as Continuous Process Improvement

Science.gov (United States)

Ellis, Charles; Castle, Kathryn

2010-01-01

Purpose: Teacher research (inquiry) has been characterized as practice improvement, professional development and action research, among numerous names and descriptions. The purpose of this paper is to support the case that teacher research is also a form of quality improvement known as continuous process improvement (CPI).…

IMPACTS OF BUS STOP IMPROVEMENTS

Science.gov (United States)

2018-03-23

Improving bus stops by providing shelters, seating, signage, and sidewalks is relatively inexpensive and popular among riders and local officials. Making such improvements, however, is not often a priority for U.S. transit providers because of compet...

Effectiveness of a quality-improvement program in improving management of primary care practices

Science.gov (United States)

Szecsenyi, Joachim; Campbell, Stephen; Broge, Bjoern; Laux, Gunter; Willms, Sara; Wensing, Michel; Goetz, Katja

2011-01-01

Background: The European Practice Assessment program provides feedback and outreach visits to primary care practices to facilitate quality improvement in five domains (infrastructure, people, information, finance, and quality and safety). We examined the effectiveness of this program in improving management in primary care practices in Germany, with a focus on the domain of quality and safety. Methods: In a before–after study, 102 primary care practices completed a practice assessment using the European Practice Assessment instrument at baseline and three years later (intervention group). A comparative group of 102 practices was included that completed their first assessment using this instrument at the time of the intervention group’s second assessment. Mean scores were based on the proportion of indicators for which a positive response was achieved by all of the practices, on a scale of 0 to 100. Results: We found significant improvements in all domains between the first and second assessments in the intervention group. In the domain of quality and safety, improvements in scores (mean scores were based on the proportion of indicators for which a positive response was achieved by all of the practices, on a scale of 0 to 100) were observed in the following dimensions: complaint management (from a mean score of 51.2 at first assessment to 80.7 at second assessment); analysis of critical incidents (from 79.1 to 89.6); and quality development, quality policy (from 40.7 to 55.6). Overall scores at the time of the second assessment were significantly higher in the intervention group than in the comparative group. Interpretation: Primary care practices that completed the European Practice Assessment instrument twice over a three-year period showed improvements in practice management. Our findings show the value of the quality-improvement cycle in the context of practice assessment and the use of established organizational standards for practice management with the

Integration of quality improvement and cost-efficiency through industrial improvement techniques

Directory of Open Access Journals (Sweden)

Vink JP

2016-06-01

Full Text Available Jasper P Vink,1 Maxime T Rigaudy,1,2 Karl O Elmqvist11Imperial College Business School, Imperial College London, London, 2Hull York Medical School, York, UKIn this journal, Crema and Verbano1 discussed the importance of defining quality of health care and how quality can be improved through various industrial instruments and techniques. Quality of health care is a heavily debated topic that requires a wide scope of considerations across the many stakeholders of the health system. We acknowledge Crema and Verbano’s arguments that patient safety is a basic pillar of quality, upon which we would like to expand by highlighting the clinical effectiveness and patient-reported outcomes, which are the two further crucial components of quality. The arguments made regarding quality improvement techniques and cost efficiency in health care provision are insightful, yet appear to make a distinction between efforts to improve quality, eliminate waste from processes, and cut costs in health care provision. We would argue that in fact these achievements are all closely related and can be achieved simultaneously, if the industrial techniques of quality management are applied adequately.View the original paper by Crema and Verbano.

Cadastral Database Positional Accuracy Improvement

Science.gov (United States)

Hashim, N. M.; Omar, A. H.; Ramli, S. N. M.; Omar, K. M.; Din, N.

2017-10-01

Positional Accuracy Improvement (PAI) is the refining process of the geometry feature in a geospatial dataset to improve its actual position. This actual position relates to the absolute position in specific coordinate system and the relation to the neighborhood features. With the growth of spatial based technology especially Geographical Information System (GIS) and Global Navigation Satellite System (GNSS), the PAI campaign is inevitable especially to the legacy cadastral database. Integration of legacy dataset and higher accuracy dataset like GNSS observation is a potential solution for improving the legacy dataset. However, by merely integrating both datasets will lead to a distortion of the relative geometry. The improved dataset should be further treated to minimize inherent errors and fitting to the new accurate dataset. The main focus of this study is to describe a method of angular based Least Square Adjustment (LSA) for PAI process of legacy dataset. The existing high accuracy dataset known as National Digital Cadastral Database (NDCDB) is then used as bench mark to validate the results. It was found that the propose technique is highly possible for positional accuracy improvement of legacy spatial datasets.

Improved flare tip design

Energy Technology Data Exchange (ETDEWEB)

Gogolek, P. [Natural Resources Canada, Ottawa, ON (Canada). CANMET Energy Technology Centre

2004-07-01

This paper discusses the testing procedures and development of an improved flare tip design. Design objectives included performance equal to or better than utility flares at low wind speed; conversion efficiency; fuel slip; smoking; significant improvement at high wind speed; and no increase in trace emissions. A description of the testing facility of the flare tip was provided, with reference to the fact that the facility allowed for realistic near full scale gas flares in a single-pass flare test facility. Other details of the facility included: an adjustable ceiling; high capacity variable speed fan; sampling ports along working section in stack; windows along working section; and air cooled walls, floor, and ceiling. The fuels used in the flare tip included natural gas, propane, gasoline and inert gases. Details of wind speed, appurtenances and turbulence generating grids were presented, with reference to continuous gas emission measurements. A list of design constraints was provided. Flare performance included wind speed, turbulence and fuel composition. A chart of conversion inefficiencies with a correlation of wind speed and turbulence, fuel flow and pipe size was also presented. Several new tip designs were fabricated for testing, with screening tests for comparison to basic pipe and ranking designs. Significant improvements were found in one of the new designs, including results with 30 per cent propane in fuel. Emissions reduction from 10 to 35 per cent were noted. It was concluded that future work should focus on evaluating improved tip for stability at low wind speeds. Fuel slips are the primary source of emissions, and it was recommended that further research is necessary to improve existing flare tips. tabs, figs.

Some possible improvements in scintillation calorimeters

International Nuclear Information System (INIS)

Lorenz, E.

1985-03-01

Two ideas for improvements of scintillation calorimeters will be presented: a) improved readout of scintillating, totally active electromagnetic calorimeters with combinations of silicon photodiodes and fluorescent panel collectors, b) use of time structure analysis on calorimetry, both for higher rate applications and improved resolution for hadron calorimeters. (orig.)

Do Clinical Practice Guidelines Improve Quality?

Science.gov (United States)

Baldassari, Cristina M

2017-07-01

Controversy exists surrounding how to best define and assess quality in the health care setting. Clinical practice guidelines (CPGs) have been developed to improve the quality of medical care by highlighting key clinical recommendations based on recent evidence. However, data linking CPGs to improvements in outcomes in otolaryngology are lacking. Numerous barriers contribute to difficulties in translating CPGs to improvements in quality. Future initiatives are needed to improve CPG adherence and define the impact of CPG recommendations on the quality of otolaryngologic care provided to our patients.

Implementation of a Quality Improvement Initiative: Improved Congenital Muscular Torticollis Outcomes in a Large Hospital Setting.

Science.gov (United States)

Strenk, Mariann L; Kiger, Michelle; Hawke, Jesse L; Mischnick, Amy; Quatman-Yates, Catherine

2017-06-01

The American Physical Therapy Association (APTA) published a guideline for congenital muscular torticollis (CMT) in 2013. Our division adopted the guideline as the institutional practice standard and engaged in a quality improvement (QI) initiative to increase the percentage of patients who achieved resolution of CMT within 6 months of evaluation. The aims of this report are to describe the QI activities conducted to improve patient outcomes and discuss the results and implications for other institutions and patient populations. This was a quality improvement study. In alignment with the Chronic Care Model and Model of Improvement, an aim and operationally defined key outcome and process measures were established. Interventions were tested using Plan-Do-Study-Act cycles. A CMT registry was established to store and manage data extracted from the electronic record over the course of testing. Statistical process control charts were used to monitor progress over time. The QI initiative resulted in an increase in the percentage of patients who achieved full resolution of CMT within a 6-month episode of care from 42% to 61% over an 18-month period. Themes that emerged as key drivers of improvement included: (1) timely, optimal access to care, (2) effective audit and clinician feedback, and (3) accurate, timely documentation. The initiative took place at a single institution with a supportive culture and strong QI resources, which may limit direct translation of interventions and findings to other institutions and patient populations. Improvement science methodologies provided the tools and structure to improve division-wide workflow and increase consistency in the implementation of the APTA CMT guideline. In doing so, significant CMT population outcome improvements were achieved. © 2017 American Physical Therapy Association

Quality improvement tools and processes.

Science.gov (United States)

Lau, Catherine Y

2015-04-01

The Model for Improvement and the Plan-Do-Study-Act cycle is a popular quality improvement (QI) tool for health care providers to successfully lead QI projects and redesign care processes. This tool has several distinct components that must be addressed in sequence to organize and critically evaluate improvement activities. Unlike other health sciences clinical research, QI projects and research are based on dynamic hypotheses that develop into observable, serial tests of change with continuous collection and feedback of performance data to stakeholders. Copyright © 2015 Elsevier Inc. All rights reserved.

Performance improvement: the organization's quest.

Science.gov (United States)

McKinley, C O; Parmer, D E; Saint-Amand, R A; Harbin, C B; Roulston, J C; Ellis, R A; Buchanan, J R; Leonard, R B

1999-01-01

In today's health care marketplace, quality has become an expectation. Stakeholders are demanding quality clinical outcomes, and accrediting bodies are requiring clinical performance data. The Roosevelt Institute's quest was to define and quantify quality outcomes, develop an organizational culture of performance improvement, and ensure customer satisfaction. Several of the organization's leaders volunteered to work as a team to develop a specific performance improvement approach tailored to the organization. To date, over 200 employees have received an orientation to the model and its philosophy and nine problem action and process improvement teams have been formed.

IMPROVING CONCEPTUAL DESIGN QUALITY

DEFF Research Database (Denmark)

Bush, Stuart; Robotham, Antony John

1999-01-01

designer to identify clear targets for design improvement and to measure the effectiveness of any new solution, whilst attention to QFD ensures customer requirements are still being satisfied.Often, SME's are not aware of many of the best design practices and so are not able to meet the demand......This paper will consider how Quality Function Deployment (QFD) and Design for Manufacture and Assembly (DFMA) processes can be used to improve the design quality of products at the concept stage. We appreciate that both QFD and DFMA are techniques that have been used for some time by mature product...... quality is maintained in design project work. The projects described have been carried out with products manufactured by small to medium sized enterprises (SME's), where we have found significant opportunities for product improvement. The quantitative nature of DFMA analysis results allows the novice...

Investigating the improver mechanisms of agricultural water ...

African Journals Online (AJOL)

Investigating the improver mechanisms of agricultural water management in karaj county from the viewpoints of the farmers. ... farmers and people, technical improvement of hydraulic structures, improvement of local people participation, improvement of water management, controlling the disturbance of external factors and ...

Creating Quality Improvement Culture in Public Health Agencies

Science.gov (United States)

Mahanna, Elizabeth; Joly, Brenda; Zelek, Michael; Riley, William; Verma, Pooja; Fisher, Jessica Solomon

2014-01-01

Objectives. We conducted case studies of 10 agencies that participated in early quality improvement efforts. Methods. The agencies participated in a project conducted by the National Association of County and City Health Officials (2007–2008). Case study participants included health directors and quality improvement team leaders and members. We implemented multiple qualitative analysis processes, including cross-case analysis and logic modeling. We categorized agencies according to the extent to which they had developed a quality improvement culture. Results. Agencies were conducting informal quality improvement projects (n = 4), conducting formal quality improvement projects (n = 3), or creating a quality improvement culture (n = 4). Agencies conducting formal quality improvement and creating a quality improvement culture had leadership support for quality improvement, participated in national quality improvement initiatives, had a greater number of staff trained in quality improvement and quality improvement teams that met regularly with decision-making authority. Agencies conducting informal quality improvement were likely to report that accreditation is the major driver for quality improvement work. Agencies creating a quality improvement culture were more likely to have a history of evidence-based decision-making and use quality improvement to address emerging issues. Conclusions. Our findings support previous research and add the roles of national public health accreditation and emerging issues as factors in agencies’ ability to create and sustain a quality improvement culture. PMID:24228680

Creating quality improvement culture in public health agencies.

Science.gov (United States)

Davis, Mary V; Mahanna, Elizabeth; Joly, Brenda; Zelek, Michael; Riley, William; Verma, Pooja; Fisher, Jessica Solomon

2014-01-01

We conducted case studies of 10 agencies that participated in early quality improvement efforts. The agencies participated in a project conducted by the National Association of County and City Health Officials (2007-2008). Case study participants included health directors and quality improvement team leaders and members. We implemented multiple qualitative analysis processes, including cross-case analysis and logic modeling. We categorized agencies according to the extent to which they had developed a quality improvement culture. Agencies were conducting informal quality improvement projects (n = 4), conducting formal quality improvement projects (n = 3), or creating a quality improvement culture (n = 4). Agencies conducting formal quality improvement and creating a quality improvement culture had leadership support for quality improvement, participated in national quality improvement initiatives, had a greater number of staff trained in quality improvement and quality improvement teams that met regularly with decision-making authority. Agencies conducting informal quality improvement were likely to report that accreditation is the major driver for quality improvement work. Agencies creating a quality improvement culture were more likely to have a history of evidence-based decision-making and use quality improvement to address emerging issues. Our findings support previous research and add the roles of national public health accreditation and emerging issues as factors in agencies' ability to create and sustain a quality improvement culture.

23 CFR 1200.25 - Improvement plan.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Improvement plan. 1200.25 Section 1200.25 Highways... Implementation and Management of the Highway Safety Program § 1200.25 Improvement plan. If a review of the Annual... improvement plan. This plan will detail strategies, program activities, and funding targets to meet the...

Assessment of and Improvement Strategies for the Housing of Healthy Elderly: Improving Quality of Life

Directory of Open Access Journals (Sweden)

I-Ming Feng

2018-03-01

Full Text Available Global population is aging, particularly in developed countries and cities. Through the “Friendly Elderly Cities” and “Aging in Place” initiatives, various countries are making great efforts to improve the welfare and quality of life of the elderly, with the aim of catering to the physical and spiritual health as well as social welfare of the elderly. In this regard, the improvement of the housing environment of the elderly is one of the key factors in their quality of life and health. This study aims to effectively assess and improve the housing environment of the elderly in order to enhance their quality of life; it also aims to contribute the knowledge about improving elderly housing by applying an assessment framework using expert interviews and data collected from relevant literature. Using a mixed Multi-Criteria Decision Analysis model, a combination of the DEMATEL (Decision Making Trial and Evaluation Laboratory-based ANP (Analytic Network Process (DANP and the modified VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR methods, and the investigations and assessments in the case study, this study proposes strategies and directions for improving elderly housing. The study results indicate that, as distinct from using traditional methodologies where the hypothesis criteria are mutually independent, the proposed hybrid model (examining real-life problems by considering the mutual influences of factors identifies a priority sequence wherein emphasis is placed on improving ventilation and air quality rather than adjustment of temperature. The systemic way of thinking shifts the focus from the most apparent problems to the root cause of the problems. Doing so avoids any mismatch of resource allocation in decision-making and thus maximizes the efficiency and sustainability of the improvement.

Does ownership of improved dairy cow breeds improve child nutrition? A pathway analysis for Uganda.

Directory of Open Access Journals (Sweden)

Nassul S Kabunga

Full Text Available The promotion of livestock production is widely believed to support enhanced diet quality and child nutrition, but the empirical evidence for this causal linkage remains narrow and ambiguous. This study examines whether adoption of improved dairy cow breeds is linked to farm-level outcomes that translate into household-level benefits including improved child nutrition outcomes in Uganda. Using nationwide data from Uganda's National Panel Survey, propensity score matching is used to create an unbiased counterfactual, based on observed characteristics, to assess the net impacts of improved dairy cow adoption. All estimates were tested for robustness and sensitivity to variations in observable and unobservable confounders. Results based on the matched samples showed that households adopting improved dairy cows significantly increased milk yield-by over 200% on average. This resulted in higher milk sales and milk intakes, demonstrating the potential of this agricultural technology to both integrate households into modern value chains and increase households' access to animal source foods. Use of improved dairy cows increased household food expenditures by about 16%. Although undernutrition was widely prevalent in the study sample and in matched households, the adoption of improved dairy cows was associated with lower child stunting in adopter household. In scale terms, results also showed that holding larger farms tends to support adoption, but that this also stimulates the household's ability to achieve gains from adoption, which can translate into enhanced nutrition.

Quality Improvement Initiatives in Inflammatory Bowel Disease.

Science.gov (United States)

Berry, Sameer K; Siegel, Corey A; Melmed, Gil Y

2017-08-01

This article serves as an overview of several quality improvement initiatives in inflammatory bowel disease (IBD). IBD is associated with significant variation in care, suggesting poor quality of care. There have been several efforts to improve the quality of care for patients with IBD. Quality improvement (QI) initiatives in IBD are intended to be patient-centric, improve outcomes for individuals and populations, and reduce costs-all consistent with "the triple aim" put forth by the Institute for Healthcare Improvement (IHI). Current QI initiatives include the development of quality measure sets to standardize processes and outcomes, learning health systems to foster collaborative improvement, and patient-centered medical homes specific to patients with IBD in shared risk models of care. Some of these programs have demonstrated early success in improving patient outcomes, reducing costs, improving patient satisfaction, and facilitating patient engagement. However, further studies are needed to evaluate and compare the effects of these programs over time on clinical outcomes in order to demonstrate long-term value and sustainability.

Quality improvement and emerging global health priorities

Science.gov (United States)

Mensah Abrampah, Nana; Syed, Shamsuzzoha Babar; Hirschhorn, Lisa R; Nambiar, Bejoy; Iqbal, Usman; Garcia-Elorrio, Ezequiel; Chattu, Vijay Kumar; Devnani, Mahesh; Kelley, Edward

2018-01-01

Abstract Quality improvement approaches can strengthen action on a range of global health priorities. Quality improvement efforts are uniquely placed to reorient care delivery systems towards integrated people-centred health services and strengthen health systems to achieve Universal Health Coverage (UHC). This article makes the case for addressing shortfalls of previous agendas by articulating the critical role of quality improvement in the Sustainable Development Goal era. Quality improvement can stimulate convergence between health security and health systems; address global health security priorities through participatory quality improvement approaches; and improve health outcomes at all levels of the health system. Entry points for action include the linkage with antimicrobial resistance and the contentious issue of the health of migrants. The work required includes focussed attention on the continuum of national quality policy formulation, implementation and learning; alongside strengthening the measurement-improvement linkage. Quality improvement plays a key role in strengthening health systems to achieve UHC. PMID:29873793

Can an interprofessional tracheostomy team improve weaning to decannulation times? A quality improvement evaluation

Science.gov (United States)

Morrison, Melissa; Catalig, Marifel; Chris, Juliana; Pataki, Janos

2016-01-01

BACKGROUND: Percutaneous tracheostomy is a common procedure in the intensive care unit and, on patient transfer to the wards, there is a gap in ongoing tracheostomy management. There is some evidence that tracheostomy teams can shorten weaning to decannulation times. In response to lengthy weaning to decannulation times at Trillium Health Partners – Credit Valley Hospital site (Mississauga, Ontario), an interprofessional tracheostomy team, led by respiratory therapists and consisting of speech-language pathologists and intensive care physicians, was implemented. OBJECTIVE: To evaluate the interprofessional tracheostomy team and its impact on time from weaning off mechanical ventilation to decannulation; and time from weaning to speech-language pathology referral. METHODS: Performance metrics were collected retrospectively through chart review pre- and post-team implementation. The primary metrics evaluated were the time from weaning off mechanical ventilation to decannulation, and time to referral to speech-language pathology. RESULTS: Following implementation of the interprofessional tracheostomy team, there was no improvement in decannulation times or time from weaning to speech-language pathology referral. A significant improvement was noted in the average time to first tracheostomy tube change (36.2 days to 22.9 days; P=0.01) and average time to speech-language pathology referral following initial tracheostomy insertion (51.8 days to 26.3 days; P=0.01). CONCLUSION: An interprofessional tracheostomy team can improve the quality of tracheostomy care through earlier tracheostomy tube changes and swallowing assessment referrals. The lack of improved weaning to decannulation time was potentially due to poor adherence with established protocols as well as a change in mechanical ventilation practices. To validate the findings from this particular institution, a more rigorous quality improvement methodology should be considered in addition to strategies to improve

24 CFR 901.145 - Improvement Plan.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Improvement Plan. 901.145 Section... PUBLIC HOUSING MANAGEMENT ASSESSMENT PROGRAM § 901.145 Improvement Plan. (a) After receipt of the State... a PHA, or a RMC through the PHA, to prepare and submit to the State/Area Office an Improvement Plan...

45 CFR 1355.35 - Program improvement plans.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Program improvement plans. 1355.35 Section 1355.35... plans. (a) Mandatory program improvement plan. (1) States found not to be operating in substantial conformity shall develop a program improvement plan. The program improvement plan must: (i) Be developed...

Improving performance on core processes of care.

Science.gov (United States)

Austin, John Matthew; Pronovost, Peter J

2016-06-01

This article describes the recent literature on using extrinsic and intrinsic motivators to improve performance on core processes of care, highlighting literature that describes general frameworks for quality improvement work. The literature supporting the effectiveness of extrinsic motivators to improve quality is generally positive for public reporting of performance, with mixed results for pay-for-performance. A four-element quality improvement framework developed by The Armstrong Institute at Johns Hopkins Medicine was developed with intrinsic motivation in mind. The clear definition and communication of goals are important for quality improvement work. Training clinicians in improvement science, such as lean sigma, teamwork, or culture change provides clinicians with the skills they need to drive the improvement work. Peer learning communities offer the opportunity for clinicians to engage with each other and offer support in their work. The transparent reporting of performance helps ensure accountability of performance ranging from individual clinicians to governance. Quality improvement work that is led by and engages clinicians offers the opportunity for the work to be both meaningful and sustainable. The literature supports approaching quality improvement work in a systematic way, including the key elements of communication, infrastructure building, training, transparency, and accountability.

Waste Management Process Improvement Project

International Nuclear Information System (INIS)

Atwood, J.; Borden, G.; Rangel, G. R.

2002-01-01

The Bechtel Hanford-led Environmental Restoration Contractor team's Waste Management Process Improvement Project is working diligently with the U.S. Department of Energy's (DOE) Richland Operations Office to improve the waste management process to meet DOE's need for an efficient, cost-effective program for the management of dangerous, low-level and mixed-low-level waste. Additionally the program must meet all applicable regulatory requirements. The need for improvement was highlighted when a change in the Groundwater/Vadose Zone Integration Project's waste management practices resulted in a larger amount of waste being generated than the waste management organization had been set up to handle

Improving the quality of care for patients with hypertension in Moshupa District, Botswana: Quality improvement cycle

Directory of Open Access Journals (Sweden)

Cathy Kande

2014-01-01

Full Text Available Background: Although there are no prevalence studies on hypertension in Botswana, this condition is thought to be common and the quality of care to be poor.Aim: The aim of this project was to assess and improve the quality of primary care forhypertension.Setting: Moshupa clinic and catchment area, Botswana.Methods: Quality improvement cycle.Results: Two hundred participants were included in the audit. Sixty-eight per cent were women with a mean age of 55 years. In the baseline audit none of the target standards were met. During the re-audit six months later, six out of nine structural target standards, five out of 11 process target standards and one out of two outcome target standards were achieved. Statistically-significant improvement in performance (p < 0.05 was shown in 10 criteria although the target standard was not always met. In the re-audit, the target of achieving blood pressure control (< 140/90 in 70% of patients was achieved.Conclusion: The quality of care for hypertension was suboptimal in our setting. Simple interventions were designed and implemented to improve the quality of care. These interventions led to significant improvement in structural and process criteria. A corresponding significant improvement in the control of blood pressure was also seen.

Can proprioception really be improved by exercises?

Science.gov (United States)

Ashton-Miller, J A; Wojtys, E M; Huston, L J; Fry-Welch, D

2001-05-01

There is little question that ankle disc training can improve ankle muscle motor performance in a unipedal balance task, most likely through improved strength and coordination [62] and possibly endurance. How much of the observed improvement in motor performance is due to improved ankle proprioception remains unknown. We have reviewed a number of theoretical ways in which training might improve proprioception for moderately challenging weight-bearing situations such as balancing on one leg. Although the relevant experiments have yet to be performed to test this hypothesis, any improvement would theoretically help to reduce injuries at these moderate levels of challenge. We question, however, whether these exercises can ever improve the reactive response required to prevent injury under the most challenging time-critical situations. If confirmed, this limitation needs to be acknowledged by authors and practitioners alike. Alternative protective strategies for the most challenging time-critical situations should be sought. We conclude that, despite their widespread acceptance, current exercises aimed at "improving proprioception" have not been demonstrated to achieve that goal. We have outlined theoretical scenarios by which proprioception might be improved, but these are speculative. The relevant experiments remain to be conducted. We argue that even if they were proven to improve proprioception, under the best circumstances such exercises could only prevent injury under slow to intermediate rate provocations to the joint musculoligamentous complex in question.

An Example of an Improvable Rao-Blackwell Improvement, Inefficient Maximum Likelihood Estimator, and Unbiased Generalized Bayes Estimator.

Science.gov (United States)

Galili, Tal; Meilijson, Isaac

2016-01-02

The Rao-Blackwell theorem offers a procedure for converting a crude unbiased estimator of a parameter θ into a "better" one, in fact unique and optimal if the improvement is based on a minimal sufficient statistic that is complete. In contrast, behind every minimal sufficient statistic that is not complete, there is an improvable Rao-Blackwell improvement. This is illustrated via a simple example based on the uniform distribution, in which a rather natural Rao-Blackwell improvement is uniformly improvable. Furthermore, in this example the maximum likelihood estimator is inefficient, and an unbiased generalized Bayes estimator performs exceptionally well. Counterexamples of this sort can be useful didactic tools for explaining the true nature of a methodology and possible consequences when some of the assumptions are violated. [Received December 2014. Revised September 2015.].

Towards improving highland ban.anas

African Journals Online (AJOL)

The most fertile land races belonged to 'Nakabululu' and 'Nfuuka' clone sets. Viable seeds were obtained from several land races indicating that genetic improvement ofthese highland bananas through cross breeding is possible. The fertile Iandraces should be cross-pollinated with improved diploids to produce resistant ...

Perspectives: The Continuous Improvement Trap

Science.gov (United States)

Arnold, David L.

2011-01-01

Accrediting agencies, legislators, pundits, and even higher educational professionals have become enamored with applying the language of continuous improvement to learning outcomes. The Southern Association of Colleges and Schools Commission on Colleges specifically uses the term "continuing improvement" in Core Standard 2.5, one of its…

Action research in collaborative improvement

NARCIS (Netherlands)

Middel, H.G.A.; Coghlan, David; Brennan, Louis; McNichols, Tim

2006-01-01

There is an increasing need to apply and transfer continuous improvement (CI) to inter-organisational processes. As such collaborative improvement (CoI) is emerging as a new concept within managerial literature and practice. This paper begins with a discussion on the logic and value of applying

Educational Intervention Improves Compliance With AAN Guidelines for Return Epilepsy Visits: A Quality Improvement Project.

Science.gov (United States)

Nelson, Gary R; Filloux, Francis M; Kerr, Lynne M

2016-10-01

In 2011, the American Academy of Neurology (AAN) released guidelines for return seizure visits detailing 8 points that should be addressed during such visits. These guidelines are designed to improve routine follow-up care for epilepsy patients. The authors performed a quality improvement project aimed at increasing compliance with these guidelines after educating providers about them. The authors performed a chart review before and after an intervention which included: education regarding the guidelines, providing materials to remind providers of the guidelines, and templates to facilitate compliance. The authors reviewed charts at 2 and 6 months after the intervention. Significant improvement in documentation of 4 of the 8 measures was observed after this educational intervention. This suggests that simple educational interventions may help providers change practice and can improve compliance with new guidelines while requiring minimal time and resources to implement. © The Author(s) 2016.

Establishing a portfolio of quality-improvement projects in pediatric surgery through advanced improvement leadership systems.

Science.gov (United States)

Gerrein, Betsy T; Williams, Christina E; Von Allmen, Daniel

2013-01-01

Formal quality-improvement (QI) projects require that participants are educated in QI methods to provide them with the capability to carry out successful, meaningful work. However, orchestrating a portfolio of projects that addresses the strategic mission of the institution requires an extension of basic QI training to provide the division or business unit with the capacity to successfully develop and manage the portfolio. Advanced Improvement Leadership Systems is a program to help units create a meaningful portfolio. This program, used by the Division of Pediatric General and Thoracic Surgery at Cincinnati Children's Hospital Medical Center, helped establish a portfolio of targeted QI projects designed to achieve outstanding outcomes at competitive costs in multiple clinical areas aligned with the institution's strategic goals (improve disease-based outcomes, patient safety, flow, and patient and family experience). These objectives are addressed in an institutional strategic plan built around 5 core areas: Safety, Productivity, Care Coordination and Outcomes, Patient and Family Experience, and Value. By combining the portfolio of QI projects with improvements in the divisional infrastructure, effective improvement efforts were realized throughout the division. In the 9 months following the program, divisional capability resulted in a 16.5% increase (5.7% to 22.2%) of formally trained staff working on 10 QI teams. Concurrently, a leadership team, designed to coordinate projects, remove barriers, and provide technical support, provided the capacity to pursue this ongoing effort. The Advanced Improvement Leadership Systems program increased the Division's efficiency and effectiveness in pursing the QI mission that is integral at our hospital.

Establishing a Portfolio of Quality-Improvement Projects in Pediatric Surgery through Advanced Improvement Leadership Systems

Science.gov (United States)

Gerrein, Betsy T; Williams, Christina E; von Allmen, Daniel

2013-01-01

Formal quality-improvement (QI) projects require that participants are educated in QI methods to provide them with the capability to carry out successful, meaningful work. However, orchestrating a portfolio of projects that addresses the strategic mission of the institution requires an extension of basic QI training to provide the division or business unit with the capacity to successfully develop and manage the portfolio. Advanced Improvement Leadership Systems is a program to help units create a meaningful portfolio. This program, used by the Division of Pediatric General and Thoracic Surgery at Cincinnati Children’s Hospital Medical Center, helped establish a portfolio of targeted QI projects designed to achieve outstanding outcomes at competitive costs in multiple clinical areas aligned with the institution’s strategic goals (improve disease-based outcomes, patient safety, flow, and patient and family experience). These objectives are addressed in an institutional strategic plan built around 5 core areas: Safety, Productivity, Care Coordination and Outcomes, Patient and Family Experience, and Value. By combining the portfolio of QI projects with improvements in the divisional infrastructure, effective improvement efforts were realized throughout the division. In the 9 months following the program, divisional capability resulted in a 16.5% increase (5.7% to 22.2%) of formally trained staff working on 10 QI teams. Concurrently, a leadership team, designed to coordinate projects, remove barriers, and provide technical support, provided the capacity to pursue this ongoing effort. The Advanced Improvement Leadership Systems program increased the Division’s efficiency and effectiveness in pursing the QI mission that is integral at our hospital. PMID:24361020

Improving Communication in Design

DEFF Research Database (Denmark)

Maier, Anja; Doenmez, Denniz; Hepperle, Clemens

2011-01-01

Communication permeates every aspect of an engineer’s work – from clarifying product specifications to shaping social ties. This paper offers an overview of recommendations from literature to improve communication within and among engineering teams. We assume communication problems are often...... of tasks. To improve these factors in order to enable effective communication, this paper collates more than hundred recommendations from journal articles and textbooks published in the fields of engineering design, management science, sociology, and psychology. Recommendations include, for example...

Identifying continuous quality improvement publications: what makes an improvement intervention ‘CQI’?

Science.gov (United States)

Hempel, Susanne; Lim, Yee-Wei; Danz, Marjorie S; Foy, Robbie; Suttorp, Marika J; Shekelle, Paul G; Rubenstein, Lisa V

2011-01-01

Background The term continuous quality improvement (CQI) is often used to refer to a method for improving care, but no consensus statement exists on the definition of CQI. Evidence reviews are critical for advancing science, and depend on reliable definitions for article selection. Methods As a preliminary step towards improving CQI evidence reviews, this study aimed to use expert panel methods to identify key CQI definitional features and develop and test a screening instrument for reliably identifying articles with the key features. We used a previously published method to identify 106 articles meeting the general definition of a quality improvement intervention (QII) from 9427 electronically identified articles from PubMed. Two raters then applied a six-item CQI screen to the 106 articles. Results Per cent agreement ranged from 55.7% to 75.5% for the six items, and reviewer-adjusted intra-class correlation ranged from 0.43 to 0.62. ‘Feedback of systematically collected data’ was the most common feature (64%), followed by being at least ‘somewhat’ adapted to local conditions (61%), feedback at meetings involving participant leaders (46%), using an iterative development process (40%), being at least ‘somewhat’ data driven (34%), and using a recognised change method (28%). All six features were present in 14.2% of QII articles. Conclusions We conclude that CQI features can be extracted from QII articles with reasonable reliability, but only a small proportion of QII articles include all features. Further consensus development is needed to support meaningful use of the term CQI for scientific communication. PMID:21727199

Practical Approaches to Quality Improvement for Radiologists.

Science.gov (United States)

Kelly, Aine Marie; Cronin, Paul

2015-10-01

Continuous quality improvement is a fundamental attribute of high-performing health care systems. Quality improvement is an essential component of health care, with the current emphasis on adding value. It is also a regulatory requirement, with reimbursements increasingly being linked to practice performance metrics. Practice quality improvement efforts must be demonstrated for credentialing purposes and for certification of radiologists in practice. Continuous quality improvement must occur for radiologists to remain competitive in an increasingly diverse health care market. This review provides an introduction to the main approaches available to undertake practice quality improvement, which will be useful for busy radiologists. Quality improvement plays multiple roles in radiology services, including ensuring and improving patient safety, providing a framework for implementing and improving processes to increase efficiency and reduce waste, analyzing and depicting performance data, monitoring performance and implementing change, enabling personnel assessment and development through continued education, and optimizing customer service and patient outcomes. The quality improvement approaches and underlying principles overlap, which is not surprising given that they all align with good patient care. The application of these principles to radiology practices not only benefits patients but also enhances practice performance through promotion of teamwork and achievement of goals. © RSNA, 2015.

Who pays for tree improvement?

Science.gov (United States)

Tom D. Byram; E. M. Raley

2011-01-01

Tree improvement has been one of the most successful collaborative research efforts in history, eliciting participation from a wide variety of players. This effort has included state forestry agencies, research universities, integrated forest industries, and the USDA Forest Service. Tree improvement was organized through cooperatives whose objectives were to distribute...

The Architecture of School Improvement

Science.gov (United States)

Murphy, Joseph

2013-01-01

Purpose: The aim of this paper is to present a comprehensive framework for capturing the complex concept the authors call school improvement. Design/methodology/approach: The author begins by anchoring that framework on an historical understanding of school improvement. The framework itself is then presented. Five dimensions are described: the…

Solutions to Improve Educational Management Quality

OpenAIRE

Ramezan Jahanian; Masoomeh Motahari

2013-01-01

Nowadays, enhancing the quality in educational systems of different countries has gained especial importance and stand. Improving utilizing and increasing the quality in our country’s educational system is felt too. One of the utilizing factors in education system is to improve the educational management quality.In this article, effective factors in educational management quality and one of its improving solutions, thorough management quality, is analyzed.

A quality improvement project to improve admission temperatures in very low birth weight infants.

Science.gov (United States)

Lee, H C; Ho, Q T; Rhine, W D

2008-11-01

To review the results of a quality improvement (QI) project to improve admission temperatures of very low birth weight inborn infants. The neonatal intensive care unit at Lucile Packard Children's Hospital underwent a QI project to address hypothermic preterm newborns by staff education and implementing processes such as polyethylene wraps and chemical warming mattresses. We performed retrospective chart review of all inborn infants with birth weight project. The improvement was consistent and persisted over a 15-month period. After risk adjustment, the strongest predictor of hypothermia was being born in the period before implementation of the QI project (odds ratio 8.12, 95% confidence interval 4.63, 14.22). Although cesarean delivery was a strong risk factor for hypothermia prior to the project, it was no longer significant after the project. There was no significant difference in death or intraventricular hemorrhage detected between periods. There was a significant improvement in admission temperatures after a QI project, which persisted beyond the initial implementation period. Although there was no difference in mortality or intraventricular hemorrhage rates, we did not have sufficient power to detect small differences in these outcomes.

Evolutionary CANDU 9 plant improvements

International Nuclear Information System (INIS)

Yu, S.K.W.

1999-01-01

The CANDU 9 is a 935 MW(e) nuclear power plant (NPP) based on the multi-unit Darlington and Bruce B designs with additional enhancements from our ongoing engineering and research programs. Added to the advantages of using proven systems and components, CANDU 9 offers improvement features with enhanced safety, improved operability and maintenance including a control centre with advanced man-machine interface, and improved project delivery in both engineering and construction. The CANDU 9 NPP design incorporated safety enhancements through careful attention to emerging licensing and safety issues. The designers assessed, revised and evolved such systems as the moderator, end shield, containment and emergency core cooling (ECC) systems while providing an integrated final design that is more passive and severe-accident-immune. AECL uses a feedback process to incorporate lessons learned from operating plants, from current projects experiences and from the implementation or construction phase of previous projects. Most of the requirements for design improvements are based on a systematic review of current operating CANDU stations in the areas of design and reliability, operability, and maintainability. The CANDU 9 Control Centre provides plant staff with improved operability and maintainability capabilities due to the combination of systematic design with human factors engineering and enhanced operating and diagnostics features. The use of advanced engineering tools and modem construction methods will reduce project implementation risk on project costs and schedules. (author)

A REVIEW OF ORDER PICKING IMPROVEMENT METHODS

Directory of Open Access Journals (Sweden)

Johan Oscar Ong

2014-09-01

Full Text Available As a crucial and one of the most important parts of warehousing, order picking often raises discussion between warehousing professionals, resulting in various studies aiming to analyze how order picking activity can be improved from various perspective. This paper reviews various past researches on order picking improvement, and the various methods those studies analyzed or developed. This literature review is based on twenty research articles on order picking improvement viewed from four different perspectives: Automation (specifically, stock-to-picker system, storage assignment policy, order batching, and order picking sequencing. By reviewing these studies, we try to identify the most prevalent order picking improvement approach to order picking improvement. Keywords: warehousing; stock-to-picker; storage assignment; order batching; order picking sequencing; improvement

Leadership Development and School Improvement

Science.gov (United States)

Rhodes, Christopher; Brundrett, Mark

2009-01-01

The chosen focus of this special issue is timely given the burgeoning international interest and investment in leadership development and school improvement. In many countries leadership and improvement have been closely linked and there is no doubt that this linkage has an international reach. Together, these articles review and extend some of…

Renovated Parks Improve Physical Activity

Centers for Disease Control (CDC) Podcasts

We know that children who are physically active every day are less likely to develop chronic diseases as adults, including obesity. Dr. Sandy Slater, a researcher with the University of Illinois, Chicago Prevention Research Center, discusses how a park improvement project in Chicago helped engage communities to improve areas for play and activity.

Workers' Objectives in Quality Improvement.

Science.gov (United States)

Brossard, Michel

1990-01-01

A case study of quality circles in an appliance factory found that circle members and nonmembers obtained better working conditions by improving quality through the direct impact of their work on the company's market position. The study of the quality improvement process shows that workers seek more than psychological rewards for their…

Perceived Factors Associated with Sustained Improvement Following Participation in a Multicenter Quality Improvement Collaborative.

Science.gov (United States)

Stone, Sohini; Lee, Henry C; Sharek, Paul J

2016-07-01

The California Perinatal Quality Care Collaborative led the Breastmilk Nutrition Quality Improvement Collaborative from October 2009 to September 2010 to increase the percentage of very low birth weight infants receiving breast milk at discharge in 11 collaborative neonatal ICUs (NICUs). Observed increases in breast milk feeding and decreases in necrotizing enterocolitis persisted for 6 months after the collaborative ended. Eighteen to 24 months after the end of the collaborative, some sites maintained or further increased their gains, while others trended back toward baseline. A study was conducted to assess the qualitative factors that affect sustained improvement following participation. Collaborative leaders at each of the 11 NICUs that participated in the Breastmilk Nutrition Quality Improvement Collaborative were invited to participate in a site-specific one-hour phone interview. Interviews were recorded and transcribed and then analyzed using qualitative research analysis software to identify themes associated with sustained improvement. Eight of 11 invited centers agreed to participate in the interviews. Thematic saturation was achieved by the sixth interview, so further interviews were not pursued. Factors contributing to sustainability included physician involvement within the multidisciplinary teams, continuous education, incorporation of interventions into the daily work flow, and integration of a data-driven feedback system. Early consideration by site leaders of how to integrate best-practice interventions into the daily work flow, and ensuring physician commitment and ongoing education based in continuous data review, should enhance the likelihood of sustaining improvements. To maximize sustained success, future collaborative design should consider proactively identifying and supporting these factors at participating sites.

Improvements in fitness are not obligatory for exercise training-induced improvements in CV risk factors.

Science.gov (United States)

Hartman, Yvonne A W; Hopman, Maria T E; Schreuder, Tim H; Verheggen, Rebecca J H M; Scholten, Ralph R; Oudegeest-Sander, Madelijn H; Poelkens, Fleur; Maiorana, Andrew J; Naylor, Louise H; Willems, Peter H; Tack, Cees J; Thijssen, Dick H J; Green, Daniel J

2018-02-01

The purpose of this study was to assess whether changes in physical fitness relate to changes in cardiovascular risk factors following standardized, center-based and supervised exercise training programs in subjects with increased cardiovascular risk. We pooled data from exercise training studies of subjects with increased cardiovascular risk (n = 166) who underwent 8-52 weeks endurance training. We determined fitness (i.e., peak oxygen uptake) and traditional cardiovascular risk factors (body mass index, blood pressure, total cholesterol, high-density lipoprotein cholesterol), before and after training. We divided subjects into quartiles based on improvement in fitness, and examined whether these groups differed in terms of risk factors. Associations between changes in fitness and in cardiovascular risk factors were further tested using Pearson correlations. Significant heterogeneity was apparent in the improvement of fitness and individual risk factors, with nonresponder rates of 17% for fitness, 44% for body mass index, 33% for mean arterial pressure, 49% for total cholesterol, and 49% for high-density lipoprotein cholesterol. Neither the number, nor the magnitude, of change in cardiovascular risk factors differed significantly between quartiles of fitness change. Changes in fitness were not correlated with changes in cardiovascular risk factors (all P > 0.05). Our data suggest that significant heterogeneity exists in changes in peak oxygen uptake after training, while improvement in fitness did not relate to improvement in cardiovascular risk factors. In subjects with increased cardiovascular risk, improvements in fitness are not obligatory for training-induced improvements in cardiovascular risk factors. © 2018 The Authors. Physiological Reports published by Wiley Periodicals, Inc. on behalf of The Physiological Society and the American Physiological Society.

Design safety improvements of Kozloduy NPP

International Nuclear Information System (INIS)

Hinovski, I.

1999-01-01

Design safety improvements of Kozloduy NPP, discussed in detail, are concerned with: primary circuit integrity; reactor pressure vessel integrity; primary coolant piping integrity; primary coolant overpressure protection; leak before break status; design basis accidents and transients; severe accident analysis; improvements of safety and support systems; containment/confinement leak tightness and strength; seismic safety improvements; WWER-1000 control rod insertion; upgrading and modernization of Units 5 and 6; Year 2000 problem

Mapping social networks in software process improvement

DEFF Research Database (Denmark)

Tjørnehøj, Gitte; Nielsen, Peter Axel

2005-01-01

Software process improvement in small, agile organizations is often problematic. Model-based approaches seem to overlook problems. We have been seeking an alternative approach to overcome this through action research. Here we report on a piece of action research from which we developed an approach...... to map social networks and suggest how it can be used in software process improvement. We applied the mapping approach in a small software company to support the realization of new ways of improving software processes. The mapping approach was found useful in improving social networks, and thus furthers...... software process improvement....

Improving the Service with the Servqual Method

Science.gov (United States)

Midor, Katarzyna; Kučera, Marian

2018-03-01

At the time when economy is growing, there is strong competition in the market, and customers have increasingly higher expectations as regards quality of service and products. Under such conditions, organizations need to improve. One of the areas of improvement for an organization is to research the level of customer satisfaction. The article presents results of customer satisfaction surveys conducted by the Servqual method in a pharmaceutical service company. Use of this method allowed to improve the services provided by that pharmaceutical wholesaler, identify areas that need to be improved as soon as possible in order to improve the level of service provided.

An Adaptive Middleware for Improved Computational Performance

DEFF Research Database (Denmark)

Bonnichsen, Lars Frydendal

, we are improving computational performance by exploiting modern hardware features, such as dynamic voltage-frequency scaling and transactional memory. Adapting software is an iterative process, requiring that we continually revisit it to meet new requirements or realities; a time consuming process......The performance improvements in computer systems over the past 60 years have been fueled by an exponential increase in energy efficiency. In recent years, the phenomenon known as the end of Dennard’s scaling has slowed energy efficiency improvements — but improving computer energy efficiency...... is more important now than ever. Traditionally, most improvements in computer energy efficiency have come from improvements in lithography — the ability to produce smaller transistors — and computer architecture - the ability to apply those transistors efficiently. Since the end of scaling, we have seen...

Using Data to Improve Educational Practice

Directory of Open Access Journals (Sweden)

Matthijs Koopmans

2017-04-01

Full Text Available Review of the book “Action Research in the Classroom: Helping Teachers Assess and Improve their Work” by Sr. Mary Ann Jacobs and Bruce S. Cooper There are many ways in which research can contribute to the improvement of educational practice, and action research is one of them. Action research bridges the gap that typically separates research from practice by having practitioners conduct specific projects to address their own questions and improve their effectiveness based on the answers they obtain. One of the advantages of this type of research is that results are often immediately accessible and have actionable implications. Thus, action research is a good tool for making improvements to the field based on evidence.

Improving Family Communications

Science.gov (United States)

... Spread the Word Shop AAP Find a Pediatrician Family Life Medical Home Family Dynamics Adoption & Foster Care ... Listen Español Text Size Email Print Share Improving Family Communications Page Content Article Body How can I ...