WorldWideScience

Sample records for pseudopod-filament adhesive contacts

  1. Factors influencing bacterial adhesion to contact lenses

    Science.gov (United States)

    Dutta, Debarun; Willcox, Mark

    2012-01-01

    The process of any contact lens related keratitis generally starts with the adhesion of opportunistic pathogens to contact lens surface. This article focuses on identifying the factors which have been reported to affect bacterial adhesion to contact lenses. Adhesion to lenses differs between various genera/species/strains of bacteria. Pseudomonas aeruginosa, which is the predominant causative organism, adheres in the highest numbers to both hydrogel and silicone hydrogel lenses in vitro. The adhesion of this strain reaches maximum numbers within 1h in most in vitro studies and a biofilm has generally formed within 24 h of cells adhering to the lens surface. Physical and chemical properties of contact lens material affect bacterial adhesion. The water content of hydroxyethylmethacrylate (HEMA)-based lenses and their iconicity affect the ability of bacteria to adhere. The higher hydrophobicity of silicone hydrogel lenses compared to HEMA-based lenses has been implicated in the higher numbers of bacteria that can adhere to their surfaces. Lens wear has different effects on bacterial adhesion, partly due to differences between wearers, responses of bacterial strains and the ability of certain tear film proteins when bound to a lens surface to kill certain types of bacteria. PMID:22259220

  2. Factors influencing bacterial adhesion to contact lenses.

    Science.gov (United States)

    Dutta, Debarun; Cole, Nerida; Willcox, Mark

    2012-01-01

    The process of any contact lens related keratitis generally starts with the adhesion of opportunistic pathogens to contact lens surface. This article focuses on identifying the factors which have been reported to affect bacterial adhesion to contact lenses. Adhesion to lenses differs between various genera/species/strains of bacteria. Pseudomonas aeruginosa, which is the predominant causative organism, adheres in the highest numbers to both hydrogel and silicone hydrogel lenses in vitro. The adhesion of this strain reaches maximum numbers within 1h in most in vitro studies and a biofilm has generally formed within 24 h of cells adhering to the lens surface. Physical and chemical properties of contact lens material affect bacterial adhesion. The water content of hydroxyethylmethacrylate (HEMA)-based lenses and their iconicity affect the ability of bacteria to adhere. The higher hydrophobicity of silicone hydrogel lenses compared to HEMA-based lenses has been implicated in the higher numbers of bacteria that can adhere to their surfaces. Lens wear has different effects on bacterial adhesion, partly due to differences between wearers, responses of bacterial strains and the ability of certain tear film proteins when bound to a lens surface to kill certain types of bacteria.

  3. 16 CFR 1500.133 - Extremely flammable contact adhesives; labeling.

    Science.gov (United States)

    2010-01-01

    ... REGULATIONS § 1500.133 Extremely flammable contact adhesives; labeling. (a) Extremely flammable contact adhesives, also known as contact bonding cements, when distributed in containers intended or suitable for... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Extremely flammable contact adhesives...

  4. Viscoelastic frictionless contact problems with adhesion

    Directory of Open Access Journals (Sweden)

    Sofonea Mircea

    2006-01-01

    Full Text Available We consider two quasistatic frictionless contact problems for viscoelastic bodies with long memory. In the first problem the contact is modelled with Signorini's conditions and in the second one is modelled with normal compliance. In both problems the adhesion of the contact surfaces is taken into account and is modelled with a surface variable, the bonding field. We provide variational formulations for the mechanical problems and prove the existence of a unique weak solution to each model. The proofs are based on arguments of time-dependent variational inequalities, differential equations, and a fixed point theorem. Moreover, we prove that the solution of the Signorini contact problem can be obtained as the limit of the solutions of the contact problem with normal compliance as the stiffness coefficient of the foundation converges to infinity.

  5. Silicone-Based Adhesives with Highly Tunable Adhesion Force for Skin-Contact Applications.

    Science.gov (United States)

    Lee, Bong Kuk; Ryu, Jin Hwa; Baek, In-Bok; Kim, Yarkyeon; Jang, Won Ick; Kim, Sang-Hyeob; Yoon, Yong Sun; Kim, Seung Hwan; Hong, Seong-Gu; Byun, Sangwon; Yu, Han Young

    2017-11-01

    A fundamental approach to fabricating silicone-based adhesives with highly tunable adhesion force for the skin-contact applications is presented. Liquid blends consisting of vinyl-multifunctional polydimethylsiloxane (V-PDMS), hydride-terminated PDMS (H-PDMS), and a tackifier composed of a silanol-terminated PDMS/MQ resin mixture and the MQ resin are used as the adhesive materials. The peel adhesion force of addition-cured adhesives on the skin is increased by increasing the H-PDMS molecular weights and the tackifier content, and decreasing the H-PDMS/V-PDMS ratio. There is an inverse relationship between the adhesion force and the Young's modulus. The low-modulus adhesives with a low H-PDMS/V-PDMS ratio exhibit enhanced adhesion properties. The low-modulus adhesives with the high MQ resin content show significantly enhanced adhesion properties. These adhesives exhibit a wide range of modulus (2-499 kPa), and their adhesion force (0.04-5.38 N) is superior to commercially available soft silicone adhesives (0.82-2.79 N). The strong adhesives (>≈2 N) provide sufficient adhesion for fixing the flexible electrocardiogram (ECG) device to the skin in most daily activity. The human ECG signals are successfully recorded in real time. These results suggest that the silicone-based adhesives should be useful as an atraumatic adhesive for the skin-contact applications. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Contact mechanics, friction and adhesion with application to quasicrystals

    DEFF Research Database (Denmark)

    Persson, Bo; Carbone, Giuseppe; Samoilov, Vladimir N.

    2015-01-01

    We discuss the origin of friction and adhesion between hard solids such as quasicrystals. We emphasize the fundamental role of surface roughness in many contact mechanics problems, in particular for friction and adhesion between solid bodies. The most important property of rough surfaces...... is the surface roughness power spectrum C(q).We present surface roughness power spectra of many surfaces of practical importance, obtained from the surface height profile measured using optical methods and the Atomic Force Microscope. We show how the power spectrum determines the contact area between two solids....... We also present applications to contact mechanics and adhesion for rough surfaces, where the power spectrum enters as an important input....

  7. Bacterial adhesion to surface hydrophilic and hydrophobic contact lenses

    NARCIS (Netherlands)

    Bruinsma, GM; van der Mei, HC; Busscher, HJ

    2001-01-01

    The aim of this paper was to determine the adhesion of two physico-chemically characterized bacterial strains to a surface hydrophilic (CL A, water contact angle 57 degrees) and hydrophobic (CL B, water contact angle 106 degrees) hydrogel contact lens (CL) with and without an adsorbed tear film in a

  8. Low Adhesion in the Wheel-Rail Contact

    NARCIS (Netherlands)

    Arias-Cuevas, O.

    2010-01-01

    Adhesion, or adhesion coefficient, is given by the ratio of the longitudinal tangential (i.e., braking or traction) force over the normal force at the wheel-rail contact. The tangential force that a braking or tractive railway wheel can exert on a rail is limited by the friction coefficient

  9. Large deformation contact mechanics of a pressurized long rectangular membrane. II. Adhesive contact

    Science.gov (United States)

    Srivastava, Abhishek; Hui, Chung-Yuen

    2013-01-01

    In part I of this work, we presented a theory for adhesionless contact of a pressurized neo-Hookean plane-strain membrane to a rigid substrate. Here, we extend our theory to include adhesion using a fracture mechanics approach. This theory is used to study contact hysteresis commonly observed in experiments. Detailed analysis is carried out to highlight the differences between frictionless and no-slip contact. Membrane detachment is found to be strongly dependent on adhesion: for low adhesion, the membrane ‘pinches-off’, whereas for large adhesions, it detaches unstably at finite contact (‘pull-off’). Expressions are derived for the critical adhesion needed for pinch-off to pull-off transition. Above a threshold adhesion, the membrane exhibits bistability, two stable states at zero applied pressure. The condition for bistability for both frictionless and no-slip boundary conditions is obtained explicitly. PMID:24353472

  10. Role of contact electrification and electrostatic interactions in gecko adhesion.

    Science.gov (United States)

    Izadi, Hadi; Stewart, Katherine M E; Penlidis, Alexander

    2014-09-06

    Geckos, which are capable of walking on walls and hanging from ceilings with the help of micro-/nano-scale hierarchical fibrils (setae) on their toe pads, have become the main prototype in the design and fabrication of fibrillar dry adhesives. As the unique fibrillar feature of the toe pads of geckos allows them to develop an intimate contact with the substrate the animal is walking on or clinging to, it is expected that the toe setae exchange significant numbers of electric charges with the contacted substrate via the contact electrification (CE) phenomenon. Even so, the possibility of the occurrence of CE and the contribution of the resulting electrostatic interactions to the dry adhesion of geckos have been overlooked for several decades. In this study, by measuring the magnitude of the electric charges, together with the adhesion forces, that gecko foot pads develop in contact with different materials, we have clarified for the first time that CE does contribute effectively to gecko adhesion. More importantly, we have demonstrated that it is the CE-driven electrostatic interactions which dictate the strength of gecko adhesion, and not the van der Waals or capillary forces which are conventionally considered as the main source of gecko adhesion. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

  11. Bacterial Adhesion Forces to Ag-Impregnated Contact Lens Cases and Transmission to Contact Lenses

    NARCIS (Netherlands)

    Qu, Wenwen; Busscher, Henk J.; van der Mei, Henny C.; Hooymans, Johanna M. M.

    Purpose: To measure adhesion forces of Pseudomonas aeruginosa, Staphylococcus aureus, and Serratia marcescens to a rigid contact lens (CL), standard polypropylene, and Ag-impregnated lens cases using atomic force microscopy and determine bacterial transmission from lens case to CL. Methods: Adhesion

  12. A contact model for sticking of adhesive meso-particles

    NARCIS (Netherlands)

    Singh, A.; Magnanimo, Vanessa; Luding, Stefan

    2016-01-01

    The interaction between visco-elasto-plastic and adhesive particles is the subject of this study, where "meso-particles" are introduced, i.e., simplified particles, whose contact mechanics is not taken into account in all details. A few examples of meso-particles include agglomerates or groups of

  13. Plasma surface modification of rigid contact lenses decreases bacterial adhesion.

    Science.gov (United States)

    Wang, Yingming; Qian, Xuefeng; Zhang, Xiaofeng; Xia, Wei; Zhong, Lei; Sun, Zhengtai; Xia, Jing

    2013-11-01

    Contact lens safety is an important topic in clinical studies. Corneal infections usually occur because of the use of bacteria-carrying contact lenses. The current study investigated the impact of plasma surface modification on bacterial adherence to rigid contact lenses made of fluorosilicone acrylate materials. Boston XO and XO2 contact lenses were modified using plasma technology (XO-P and XO2-P groups). Untreated lenses were used as controls. Plasma-treated and control lenses were incubated in solutions containing Staphylococcus aureus or Pseudomonas aeruginosa. MTT colorimetry, colony-forming unit counting method, and scanning electron microscopy were used to measure bacterial adhesion. MTT colorimetry measurements showed that the optical density (OD) values of XO-P and XO2-P were significantly lower than those of XO and XO2, respectively, after incubation with S. aureus (P plasma technology in contact lens surface modification.

  14. Large deformation and adhesive contact studies of axisymmetric membranes.

    Science.gov (United States)

    Laprade, Evan J; Long, Rong; Pham, Jonathan T; Lawrence, Jimmy; Emrick, Todd; Crosby, Alfred J; Hui, Chung-Yuen; Shull, Kenneth R

    2013-02-05

    A model membrane contact system consisting of an acrylic copolymer membrane and a PDMS substrate was utilized to evaluate a recently developed nonlinear large-deformation adhesive contact analysis. Direct measurements of the local membrane apex strain during noncontact inflation indicated that the neo-Hookean model provides an accurate measure of membrane strain and supports its use as the strain energy function for the analysis. Two membrane contact geometries, exhibiting significantly different strain distributions during withdrawal, were investigated. The first examines the wet contact of an air pressurized membrane. The second looks at the dry contact of a fluid deformed membrane in which a stepper motor controls membrane-substrate separation. A time-dependent modulus emerges from the analysis, with principal tensions obtained from a comparison of predicted and experimental membrane profiles. The applicability of this numerical analysis for determining membrane tension, however, is limited by wrinkling instabilities and viscoelasticity. For this reason, a conceptually simpler method, based on the direct measurement of the membrane tension and contact angle, was also utilized. The traditional peel energy defined with this direct measurement accurately described the membrane/substrate adhesive interactions, giving well-defined peel energies that were independent of the detailed strain state of the membrane.

  15. Staying sticky: contact self-cleaning of gecko-inspired adhesives

    OpenAIRE

    Mengüç, Yiğit; Röhrig, Michael; Abusomwan, Uyiosa; Hölscher, Hendrik; Sitti, Metin

    2014-01-01

    The exceptionally adhesive foot of the gecko remains clean in dirty environments by shedding contaminants with each step. Synthetic gecko-inspired adhesives have achieved similar attachment strengths to the gecko on smooth surfaces, but the process of contact self-cleaning has yet to be effectively demonstrated. Here, we present the first gecko-inspired adhesive that has matched both the attachment strength and the contact self-cleaning performance of the gecko's foot on a smooth surface. Con...

  16. Review on prevention of bacterial adhesion on contact lens using plasma treatment

    Science.gov (United States)

    Ramli, N. A. H.; Zaaba, S. K.; Mustaffa, M. T.; Zakaria, A.; Shahriman A., B.

    2017-03-01

    Many researches had been conducted to enhance the properties of contact lens. Most of the research conducted discussed on the factors that affect the adhesion process to contact lenses, rate of contact lens contamination, and type of microbe that adhere on the contact lens surface and contact lens casing. Studies on the proposed strategies or technology that can be used to slower down the formation of bacteria on contact lens are being explored. New technologies or strategies to prevent or slow down the adhesion of bacteria on contact lens have become a priority in this area. This review paper covers two main aspects, namely factor that affect the bacteria adhesion on contact lens and also the introduction of plasma treatment as a potential method for contact lens treatment.

  17. Mechanisms of Contact, Adhesion, and Failure of Metallic Nanoasperities in the Presence of Adsorbates: Toward Conductive Contact Design.

    Science.gov (United States)

    Yang, Fan; Carpick, Robert W; Srolovitz, David J

    2017-01-24

    The properties of contacting interfaces are strongly affected not only by the bulk and surface properties of contacting materials but also by the ubiquitous presence of adsorbed contaminants. Here, we focus on the properties of single asperity contacts in the presence of adsorbates within a molecular dynamics description of metallic asperity normal contact and a parametric description of adsorbate properties. A platinum-platinum asperity contact is modeled with adsorbed oligomers with variable properties. This system is particularly tailored to the context of nanoelectromechanical system (NEMS) contact switches, but the results are generally relevant to metal-metal asperity contacts in nonpristine conditions. Even though mechanical forces can displace adsorbate out of the contact region, increasing the adsorbate layer thickness and/or adsorbate/metal adhesion makes it more difficult for metal asperity/metal surface contact to occur, thereby lowering the electrical contact conductance. Contact separation is a competition between plastic necking in the asperity or decohesion at the asperity/substrate interface. The mechanism which operates at a lower tensile stress dominates. Necking dominates when the adsorbate/metal adhesion is strong and/or the adsorbate layer thickness is small. In broad terms, necking implies larger asperity deformation and mechanical work, as compared with decohesion. Optimal NEMS switch performance requires substantial contact conductance and minimal asperity deformation; these results indicate that these goals can be achieved by balancing the quantity of adsorbates and their adhesion to the metal surface.

  18. Staying sticky: contact self-cleaning of gecko-inspired adhesives.

    Science.gov (United States)

    Mengüç, Yigit; Röhrig, Michael; Abusomwan, Uyiosa; Hölscher, Hendrik; Sitti, Metin

    2014-05-06

    The exceptionally adhesive foot of the gecko remains clean in dirty environments by shedding contaminants with each step. Synthetic gecko-inspired adhesives have achieved similar attachment strengths to the gecko on smooth surfaces, but the process of contact self-cleaning has yet to be effectively demonstrated. Here, we present the first gecko-inspired adhesive that has matched both the attachment strength and the contact self-cleaning performance of the gecko's foot on a smooth surface. Contact self-cleaning experiments were performed with three different sizes of mushroom-shaped elastomer microfibres and five different sizes of spherical silica contaminants. Using a load-drag-unload dry contact cleaning process similar to the loads acting on the gecko foot during locomotion, our fully contaminated synthetic gecko adhesives could recover lost adhesion at a rate comparable to that of the gecko. We observed that the relative size of contaminants to the characteristic size of the microfibres in the synthetic adhesive strongly determined how and to what degree the adhesive recovered from contamination. Our approximate model and experimental results show that the dominant mechanism of contact self-cleaning is particle rolling during the drag process. Embedding of particles between adjacent fibres was observed for particles with diameter smaller than the fibre tips, and further studied as a temporary cleaning mechanism. By incorporating contact self-cleaning capabilities, real-world applications of synthetic gecko adhesives, such as reusable tapes, clothing closures and medical adhesives, would become feasible.

  19. Staying sticky: contact self-cleaning of gecko-inspired adhesives

    Science.gov (United States)

    Mengüç, Yiğit; Röhrig, Michael; Abusomwan, Uyiosa; Hölscher, Hendrik; Sitti, Metin

    2014-01-01

    The exceptionally adhesive foot of the gecko remains clean in dirty environments by shedding contaminants with each step. Synthetic gecko-inspired adhesives have achieved similar attachment strengths to the gecko on smooth surfaces, but the process of contact self-cleaning has yet to be effectively demonstrated. Here, we present the first gecko-inspired adhesive that has matched both the attachment strength and the contact self-cleaning performance of the gecko's foot on a smooth surface. Contact self-cleaning experiments were performed with three different sizes of mushroom-shaped elastomer microfibres and five different sizes of spherical silica contaminants. Using a load–drag–unload dry contact cleaning process similar to the loads acting on the gecko foot during locomotion, our fully contaminated synthetic gecko adhesives could recover lost adhesion at a rate comparable to that of the gecko. We observed that the relative size of contaminants to the characteristic size of the microfibres in the synthetic adhesive strongly determined how and to what degree the adhesive recovered from contamination. Our approximate model and experimental results show that the dominant mechanism of contact self-cleaning is particle rolling during the drag process. Embedding of particles between adjacent fibres was observed for particles with diameter smaller than the fibre tips, and further studied as a temporary cleaning mechanism. By incorporating contact self-cleaning capabilities, real-world applications of synthetic gecko adhesives, such as reusable tapes, clothing closures and medical adhesives, would become feasible. PMID:24554579

  20. Boundary element method for normal non-adhesive and adhesive contacts of power-law graded elastic materials

    Science.gov (United States)

    Li, Qiang; Popov, Valentin L.

    2017-08-01

    Recently proposed formulation of the boundary element method for adhesive contacts has been generalized for contacts of power-law graded materials with and without adhesion. Proceeding from the fundamental solution for single force acting on the surface of an elastic half space, first the influence matrix is obtained for a rectangular grid. The inverse problem for the calculation of required stress in the contact area from a known surface displacement is solved using the conjugate-gradient technique. For the transformation between the stresses and displacements, the Fast Fourier Transformation is used. For the adhesive contact of graded material, the detachment criterion based on the energy balance is proposed. The method is validated by comparison with known exact analytical solutions as well as by proving the independence of the mesh size and the grid orientation.

  1. Continuum mechanics at the atomic scale : Insights into non-adhesive contacts using molecular dynamics simulations

    NARCIS (Netherlands)

    Solhjoo, Soheil; Vakis, Antonis I.

    2016-01-01

    Classical molecular dynamics (MD) simulations were performed to study non-adhesive contact at the atomic scale. Starting from the case of Hertzian contact, it was found that the reduced Young’s modulus E* for shallow indentations scales as a function of, both, the indentation depth and the contact

  2. 16 CFR 1145.3 - Extremely flammable contact adhesives; risk of burns from explosive vapor ignition and flashback...

    Science.gov (United States)

    2010-01-01

    ...) Extremely flammable contact adhesives and other similar liquid or semi-liquid products in containers over... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Extremely flammable contact adhesives; risk... TO OTHER ACTS UNDER THE CONSUMER PRODUCT SAFETY ACT § 1145.3 Extremely flammable contact adhesives...

  3. The adhesive contact problem in one-dimensional hexagonal quasicrystals with complex variable function method

    Directory of Open Access Journals (Sweden)

    ZHAO Xuefen

    2016-06-01

    Full Text Available This paper considers the adhesive contact problem in aperiodical plane of one-dimensional hexagonal quasicrystals. By complex variable method, the adhesive contact problem is converted into a Riemann-Hilbert boundary problem. By solving that, we obtain the explicit expressions of stress functions and contact stress for a rigid flat punch. The results how that: (1 the contact displacement is proportional to the indentation force under a flat rigid punch; (2 The contact stress exhibits the oscillatory singularities at the edge of the contact zone. Because phonon field and phason field are coupled in one-dimensional hexagonal quasicrystals, the distribution of contact stress under punch is different from the results of contact problems in the classical elasticity theory. Without the contribution of phason field, the above solutions degenerate into the classical ones. Here is the abstract of your article.

  4. Monitoring the Contact Stress Distribution of Gecko-Inspired Adhesives Using Mechano-Sensitive Surface Coatings.

    Science.gov (United States)

    Neubauer, Jens W; Xue, Longjian; Erath, Johann; Drotlef, Dirk-M; Campo, Aránzazu Del; Fery, Andreas

    2016-07-20

    The contact geometry of microstructured adhesive surfaces is of high relevance for adhesion enhancement. Theoretical considerations indicate that the stress distribution in the contact zone is crucial for the detachment mechanism, but direct experimental evidence is missing so far. In this work, we propose a method that allows, for the first time, the detection of local stresses at the contact area of biomimetic adhesive microstructures during contact formation, compression and detachment. We use a mechano-sensitive polymeric layer, which turns mechanical stresses into changes of fluorescence intensity. The biomimetic surface is brought into contact with this layer in a well-defined fashion using a microcontact printer, while the contact area is monitored with fluorescence microscopy in situ. Thus, changes in stress distribution across the contact area during compression and pull-off can be visualized with a lateral resolution of 1 μm. We apply this method to study the enhanced adhesive performance of T-shaped micropillars, compared to flat punch microstructures. We find significant differences in the stress distribution of the both differing contact geometries during pull-off. In particular, we find direct evidence for the suppression of crack nucleation at the edge of T-shaped pillars, which confirms theoretical models for the superior adhesive properties of these structures.

  5. Surface thermodynamics and adhesion forces governing bacterial transmission in contact lens related microbial keratitis

    NARCIS (Netherlands)

    Qu, Wenwen; Busscher, Henk J.; Hooymans, Johanna M. M.; van der Mei, Henny C.

    2011-01-01

    Contact lens induced microbial keratitis results from bacterial transmission from one surface to another. We investigated the adhesion forces of Pseudomonas aeruginosa, Staphylococci and Serratia to different contact lenses, lens cases and corneal surfaces using AFM, and applied a Weibull analysis

  6. Adhesion of Pseudomonas aeruginosa to contact lenses after exposure to multi-purpose lens care solutions

    NARCIS (Netherlands)

    Bruinsma, GM; Van der Mei, HC; Busscher, HJ; de Vries, Jacob

    2001-01-01

    Elemental surface compositions of contact lenses were measured after exposure to different lens care solutions (LCS) using X-ray photoelectron spectroscopy and were related to adhesion and detachment of Pseudomonas aeruginosa. Etafilcon A and polymacon contact lenses, prior to and after exposure to

  7. Elastic–plastic adhesive contact of non-Gaussian rough surfaces

    Indian Academy of Sciences (India)

    Abstract. The paper describes an analysis of adhesion at the contact between non-. Gaussian rough surfaces using the Weibull distribution with skewness as the key parameter to characterize asymmetry. The analysis uses an improved elastic–plastic model of contact deformation that is based on accurate Finite Element ...

  8. Effect of repeated contact on adhesion measurements involving polydimethylsiloxane structural material

    Energy Technology Data Exchange (ETDEWEB)

    Kroner, E; Arzt, E [INM-Leibniz Institute for New Materials, Campus D2 2, 66125 Saarbruecken (Germany); Maboudian, R, E-mail: elmar.kroner@inm-gmbh.de [Department of Chem. Eng., 201 Gilman Hall, University of California, Berkeley, CA 94720-1462 (United States)

    2009-09-15

    During the last few years several research groups have focused on the fabrication of artificial gecko inspired adhesives. For mimicking these structures, different polymers are used as structure material, such as polydimethylsiloxanes (PDMS), polyurethanes (PU), and polypropylene (PP). While these polymers can be structured easily and used for artificial adhesion systems, the effects of repeated adhesion testing have never been investigated closely. In this paper we report on the effect of repeated adhesion measurements on the commercially available poly(dimethylsiloxane) polymer kit Sylgard 184 (Dow Corning). We show that the adhesion force decreases as a function of contact cycles. The rate of change and the final value of adhesion are found to depend on the details of the PDMS synthesis and structuring.

  9. Corneal cell adhesion to contact lens hydrogel materials enhanced via tear film protein deposition.

    Directory of Open Access Journals (Sweden)

    Claire M Elkins

    Full Text Available Tear film protein deposition on contact lens hydrogels has been well characterized from the perspective of bacterial adhesion and viability. However, the effect of protein deposition on lens interactions with the corneal epithelium remains largely unexplored. The current study employs a live cell rheometer to quantify human corneal epithelial cell adhesion to soft contact lenses fouled with the tear film protein lysozyme. PureVision balafilcon A and AirOptix lotrafilcon B lenses were soaked for five days in either phosphate buffered saline (PBS, borate buffered saline (BBS, or Sensitive Eyes Plus Saline Solution (Sensitive Eyes, either pure or in the presence of lysozyme. Treated contact lenses were then contacted to a live monolayer of corneal epithelial cells for two hours, after which the contact lens was sheared laterally. The apparent cell monolayer relaxation modulus was then used to quantify the extent of cell adhesion to the contact lens surface. For both lens types, lysozyme increased corneal cell adhesion to the contact lens, with the apparent cell monolayer relaxation modulus increasing up to an order of magnitude in the presence of protein. The magnitude of this increase depended on the identity of the soaking solution: lenses soaked in borate-buffered solutions (BBS, Sensitive Eyes exhibited a much greater increase in cell attachment upon protein addition than those soaked in PBS. Significantly, all measurements were conducted while subjecting the cells to moderate surface pressures and shear rates, similar to those experienced by corneal cells in vivo.

  10. Contact compliance effects in the frictional response of bioinspired fibrillar adhesives

    Science.gov (United States)

    Piccardo, Marco; Chateauminois, Antoine; Fretigny, Christian; Pugno, Nicola M.; Sitti, Metin

    2013-01-01

    The shear failure and friction mechanisms of bioinspired adhesives consisting of elastomer arrays of microfibres terminated by mushroom-shaped tips are investigated in contact with a rigid lens. In order to reveal the interplay between the vertical and lateral loading directions, experiments are carried out using a custom friction set-up in which normal stiffness can be made either high or low when compared with the stiffness of the contact between the fibrillar adhesive and the lens. Using in situ contact imaging, the shear failure of the adhesive is found to involve two successive mechanisms: (i) cavitation and peeling at the contact interface between the mushroom-shaped fibre tip endings and the lens; and (ii) side re-adhesion of the fibre's stem to the lens. The extent of these mechanisms and their implications regarding static friction forces is found to depend on the crosstalk between the normal and lateral loading directions that can result in contact instabilities associated with fibre buckling. In addition, the effects of the viscoelastic behaviour of the polyurethane material on the rate dependence of the shear response of the adhesive are accounted for. PMID:23554349

  11. Contact resistance and adhesion characteristics of oxidized tantalum nitride mirors

    Energy Technology Data Exchange (ETDEWEB)

    Kramer, D.K.

    1975-11-01

    Oxidation of tantalum nitride resistor films used in hybrid microcircuits is an unavoidable phenomenon known to affect interfacial properties between resistor and conductor layers. At room temperature, oxide thickness increases with time at an unknown rate; therefore, a three-day limitation between Ta/sub 2/N and Cr/Au conductor deposition is presently specified for hybrid microcircuits. The effects of Ta/sub 2/N aging on resistor-conductor contact resistance and conductor bondability were evaluated. Accelerated aging produced oxide layers of various thicknesses which were then correlated to contact resistance. Analytical data and calculations indicate that a 25 percent increase in contact resistance would occur by exposing the Ta/sub 2/N to air for approximately three years at room temperature and pressure prior to metallization. However, little or no change in bondability would be expected.

  12. The Effect of Surface Contamination on Adhesive Forces as Measured by Contact Mechanics

    Energy Technology Data Exchange (ETDEWEB)

    EMERSON,JOHN A.; GIUNTA,RACHEL K.; MILLER,GREGORY V.; SORENSEN,CHRISTOPHER R.; PEARSON,RAYMOND A.

    2000-12-18

    The contact adhesive forces between two surfaces, one being a soft hemisphere and the other being a hard plate, can readily be determined by applying an external compressive load to mate the two surfaces and subsequently applying a tensile load to peel the surfaces apart. The contact region is assumed the superposition of elastic Hertzian pressure and of the attractive surface forces that act only over the contact area. What are the effects of the degree of surface contamination on adhesive forces? Clean aluminum surfaces were coated with hexadecane as a controlled contaminant. The force required to pull an elastomeric hemisphere from a surface was determined by contact mechanics, via the JKR model, using a model siloxane network for the elastomeric contact sphere. Due to the dispersive nature of the elastomer surface, larger forces were required to pull the sphere from a contaminated surface than a clean aluminum oxide surface.

  13. Mechanics of load-drag-unload contact cleaning of gecko-inspired fibrillar adhesives.

    Science.gov (United States)

    Abusomwan, Uyiosa A; Sitti, Metin

    2014-10-14

    Contact self-cleaning of gecko-inspired synthetic adhesives with mushroom-shaped tips has been demonstrated recently using load-drag-unload cleaning procedures similar to that of the natural animal. However, the underlying mechanics of contact cleaning has yet to be fully understood. In this work, we present a detailed experiment of contact self-cleaning that shows that rolling is the dominant mechanism of cleaning for spherical microparticle contaminants, during the load-drag-unload procedure. We also study the effect of dragging rate and normal load on the particle rolling friction. A model of spherical particle rolling on an elastomer fibrillar adhesive interface is developed and agrees well with the experimental results. This study takes us closer to determining design parameters for achieving self-cleaning fibrillar adhesives.

  14. Adhesion of two physically contacting planar substrates coated with layer-by-layer assembled films.

    Science.gov (United States)

    Matsukuma, Daisuke; Aoyagi, Takao; Serizawa, Takeshi

    2009-09-01

    Adhesives composed of synthetic and low-cost molecules that are based on simple chemical principles are attractive because of their versatility. In this article, we report adhesion between two planar substrates coated with layer-by-layer (LbL) assembled films of cationic poly(diallyldimethylammonium chloride) (PDDA) and anionic poly(sodium styrenesulfonate) (PSS) and perform lap shear measurements of the adhered substrates. Films prepared on the substrates functioned as adhesives when one substrate coated with the PDDA-surface film contacted the other surface coated with the PSS-surface film under adequate pressure in the presence of water droplets, suggesting that two films adhered on the basis of polyion complex formation. Observations suggested that the adhesives failed at the substrate-film interface rather than at the bulk films. The adhesion was compared between film-coated substrates and noncoated ones. Confocal laser scanning microscopic observation of adhesives composed of fluorescently labeled poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) revealed that the labeled PAH assembled on one substrate was well dispersed, even in a nonlabeled film assembled on another substrate. It was therefore confirmed that after adhesion in the presence of the water component, the polyelectrolytes became intermixed between the glassy films, resulting in changes in the adhesive structure at the substrate-film interface.

  15. Strong mechanical adhesion of gold electroless contacts on CdZnTe deposited by alcoholic solutions

    Science.gov (United States)

    Benassi, G.; Nasi, L.; Bettelli, M.; Zambelli, N.; Calestani, D.; Zappettini, A.

    2017-02-01

    CdZnTe crystals are nowadays employed as X-ray detectors for a number of applications, such as medical imaging, security, and environmental monitoring. One of the main difficulties connected with CdZnTe-based detector processing is the poor contact adhesion that affect bonding procedures and device long term stability. We have shown that it is possible to obtain mechanically stable contacts by common electroless deposition using alcoholic solutions instead of water solutions. The contacts show blocking current-voltage characteristic that is required for obtaining spectroscopic detectors. Nanoscale-resolved chemical analysis indicated that the improved mechanical adhesion is due to a better control of the stoichiometry of the CdZnTe layer below the contact.

  16. Mechanical modeling and characteristic study for the adhesive contact of elastic layered media

    Science.gov (United States)

    Zhang, Yuyan; Wang, Xiaoli; Tu, Qiaoan; Sun, Jianjun; Ma, Chenbo

    2017-11-01

    This paper investigates the adhesive contact between a smooth rigid sphere and a smooth elastic layered medium with different layer thicknesses, layer-to-substrate elastic modulus ratios and adhesion energy ratios. A numerical model is established by combining elastic responses of the contact system and an equation of equivalent adhesive contact pressure which is derived based on the Hamaker summation method and the Lennard–Jones intermolecular potential law. Simulation results for hard layer cases demonstrate that variation trends of the pull-off force with the layer thickness and elastic modulus ratio are complex. On one hand, when the elastic modulus ratio increases, the pull-off force decreases at smaller layer thicknesses, decreases at first and then increases at middle layer thicknesses, while increases monotonously at larger layer thicknesses. On the other hand, the pull-off force decreases at first and then increases with the increase in the layer thickness. Furthermore, a critical layer thickness above which the introduction of hard layer cannot reduce adhesion and an optimum layer thickness under which the pull-off force reaches a minimum are found. Both the critical and optimum layer thicknesses become larger with an increase in the Tabor parameter, while they tend to decrease with the increase in the elastic modulus ratio. In addition, the pull-off force increases sublinearly with the adhesion energy ratio if the layer thickness and elastic modulus ratio are fixed.

  17. In vitro adhesion of Acanthamoeba castellanii to soft contact lenses depends on water content and disinfection procedure.

    Science.gov (United States)

    Reverey, Julia F; Fromme, Roland; Leippe, Matthias; Selhuber-Unkel, Christine

    2014-08-01

    To compare the potential of different soft contact lenses to be contaminated with Acanthamoeba castellanii as a function of material parameters and cleaning procedures. Different unworn soft hydrogel and silicone hydrogel contact lenses were incubated with human pathogenic A. castellanii. The adhesion of the acanthamoebae was investigated on the contact lenses and put into relation to their material parameters. The efficacy of a recommended contact lens cleaning procedure in reducing A. castellanii adhesion was investigated. We found that material parameters such as elastic modulus, silicone content, ionic properties and swelling do not influence the adhesion of acanthamoebae to soft contact lenses. A material parameter that influenced adhesion significantly was the water content of the lens. With increasing water content, the adhesion of acanthamoebae increased. By following the cleaning instructions of the manufacturer the contamination of the lenses with A. castellanii could be reduced to a minimum, as shown both on contact lenses and in control experiments. With this study we show that for the tested lenses, the adhesion of A. castellanii to contact lenses is independent of the silicone content of the lens, but depends nonlinearly on the water content of the lens. Furthermore, we demonstrate that applying proper lens cleaning procedures minimizes the risk of acanthamoebae adhesion to contact lenses. Copyright © 2013 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

  18. Effects of multipurpose solutions on the adhesion of Acanthamoeba to rigid gas permeable contact lenses.

    Science.gov (United States)

    Lee, Ga-Hyun; Yu, Hak-Sun; Lee, Ji-Eun

    2016-03-01

    To evaluate the effect of multipurpose contact lens care solutions (MPSs) on the adhesion of Acanthamoeba to rigid gas permeable (RGP) contact lenses. Acanthamoeba castellanii (AC) trophozoites were inoculated onto untreated RGP contact lenses (FP, Extra, or Menicon Z), and numbers of trophozoites adhering to lenses were counted under a phase contrast microscope at 18 h post-inoculation (controls). Similarly, adhering trophozoites were counted at 6 h post-inoculation on each of the three RGP lens types with one of three MPSs (Boston Simplus, Menicare Plus, and O2 Care). Scanning electron microscopic examinations were performed to compare lens surfaces. Adhesion of AC trophozoites to untreated FP was greater than to untreated Extra or Menicon Z. Surfaces of Extra and Menicon Z lenses were waxier, smoother, and more homogeneous than those of FP lenses. After treatment with Boston Simplus, adhesion of AC trophozoites was significantly reduced for all lens types as compared with controls (p lenses only as compared with controls (p lenses depended on lens surfaces. Boston Simplus reduced the adhesion rate of AC trophozoites more than Menicare Plus or O2 Care. Appropriate RGP lens and MPS selection could decrease the prevalence of Acanthamoeba keratitis. © 2016 The Authors Ophthalmic & Physiological Optics © 2016 The College of Optometrists.

  19. Evaluation of cytotoxic effects of six self-etching adhesives with direct and indirect contact tests.

    Science.gov (United States)

    Kusdemir, Mahmut; Gunal, Solen; Ozer, Fusun; Imazato, Satoshi; Izutani, Naomi; Ebisu, Shigeyuki; Blatz, Markus B

    2011-01-01

    This study evaluated the cytotoxicity of self-etching primers/adhesives by direct contact and dentin barrier tests. The three two-step self-etching systems Clearfil SE Bond (CSE), Clearfil Protect Bond (CPB), Prime&Bond NT/NRC (PB) and one-step self-etching systems Reactmer Bond (RB), Clearfil Tri-S Bond (CTS), and Adper Prompt L-Pop (AP) were examined. In direct contact tests, L929 cells were cultured in the presence of diluted solutions (50, 20, 10, and 1%) of primer/conditioner of adhesive systems. For dentin barrier tests, each system was applied onto 0.5 or 1.5 mm thick human dentin assembled in a simple pulp chamber device and incubated for 24 h at 37°C to make the diffusive components contact the L929 cells placed at the bottom of the chamber. The cytotoxic effects were assessed by MTT assay. Cell culture without application of any primers/adhesives served as the control for both tests. One-way ANOVA and Tukey HSD tests were used for statistical analyses. The direct contact tests demonstrated that CSE and CPB were less toxic than the other materials at all dilutions. In the dentin barrier tests, toxic effects of materials were reduced with an increase in thickness of intervening dentin. CSE and CPB showed less cytotoxicity than the other adhesives (psystems. Two-step self-etching systems with HEMA-based primers were more biocompatible than other self-etching adhesives.

  20. Cell-contact-dependent activation of CD4+ T cells by adhesion molecules on synovial fibroblasts.

    Science.gov (United States)

    Mori, Masato; Hashimoto, Motomu; Matsuo, Takashi; Fujii, Takao; Furu, Moritoshi; Ito, Hiromu; Yoshitomi, Hiroyuki; Hirose, Jun; Ito, Yoshinaga; Akizuki, Shuji; Nakashima, Ran; Imura, Yoshitaka; Yukawa, Naoichiro; Yoshifuji, Hajime; Ohmura, Koichiro; Mimori, Tsuneyo

    2017-05-01

    To determine how cell-cell contact with synovial fibroblasts (SF) influence on the proliferation and cytokine production of CD4+ T cells. Naïve CD4+ T cells were cultured with SF from rheumatoid arthritis patients, stimulated by anti-CD3/28 antibody, and CD4+ T cell proliferation and IFN-γ/IL-17 production were analyzed. To study the role of adhesion molecules, cell contact was blocked by transwell plate or anti-intracellular adhesion molecule-1 (ICAM-1)/vascular cell adhesion molecule-1(VCAM-1) antibody. To study the direct role of adhesion molecules for CD4+ T cells, CD161+ or CD161- naïve CD4+ T cells were stimulated on plastic plates coated by recombinant ICAM-1 or VCAM-1, and the source of IFN-γ/IL-17 were analyzed. SF enhanced naïve CD4+ T cell proliferation and IFN-γ/IL-17 production in cell-contact and in part ICAM-1-/VCAM-1-dependent manner. Plate-coated ICAM-1 and VCAM-1 enhanced naïve CD4+ T cell proliferation and IFN-γ production, while VCAM-1 efficiently promoting IL-17 production. CD161+ naïve T cells upregulating LFA-1 and VLA-4 were the major source of IFN-γ/IL-17 upon interaction with ICAM-1/VCAM-1. CD4+ T cells rapidly expand and secrete IFN-γ/IL-17 upon cell-contact with SF via adhesion molecules. Interfering with ICAM-1-/VCAM-1 may be beneficial for inhibiting RA synovitis.

  1. Interfacial stiffness and adhesion of randomly rough contacts probed by elastomer colloidal AFM probes

    Energy Technology Data Exchange (ETDEWEB)

    Buzio, R; Valbusa, U [Nanomed Labs, ABC-Advanced Biotechnology Center, Largo R. Benzi 10, 16136 Genova (Italy); Physics Department, University of Genova, Via Dodecaneso 33, 16146 Genova (Italy)], E-mail: buzio@fisica.unige.it

    2008-09-03

    We report on contact mechanics experiments addressing the role of surface roughness on interfacial stiffness and adhesion. Colloidal atomic force microscopy probes, based on poly(dimethylsiloxane) microparticles, are pressed against ceramic substrates with different roughnesses; the applied load, deformation rate and dwell time being separately controlled. We observe a clear dependence of load-deformation curves and pull-off forces on roughness values, likely arising from morphological modulation of the contact area; remarkably this affects the contact stiffness, which is found to decrease for rougher junctions. The emergence of purely geometrical effects for poly(dimethylsiloxane) rough contacts extends previous findings on plastically deformed self-affine surfaces and demonstrates the efficient tuning of contact response through a proper design of surface morphology.

  2. Adhesion of Pathogenic Bacteria to Food Contact Surfaces: Influence of pH of Culture

    Directory of Open Access Journals (Sweden)

    Akier Assanta Mafu

    2011-01-01

    Full Text Available The adhesion of Aeromonas hydrophila, Escherichia coli O157:H7, Salmonella Enteritidis, and Staphylococcus aureus to hydrophobic and hydrophilic surfaces in cultures with different pHs (6, 7, and 8 was studied. The results indicated that the type of material had no effect on the attachment capacity of microorganisms, while environmental pH influenced the adhesion of A. hydrophila, E. coli, and S. aureus to both solid substrates. The attachment of S. Enteritidis (P>.05 was not affected by the type of substrate or the culture pH, whereas E. coli displayed the weakest affinity for both polystyrene and glass surfaces. No correlation was established between the physicochemical properties of the materials, or the bacterial and the rate of bacterial adhesion, except for S. aureus. Photomicrographs have shown that surfaces were contaminated by small clusters of S. Enteritidis while S. aureus invaded the food contact surfaces in the form of small chains or cell aggregates.

  3. EXPERIMENTAL INVESTIGATION OF THE ADHESIVE CONTACT WITH ELASTOMERS: EFFECT OF SURFACE ROUGHNESS

    Directory of Open Access Journals (Sweden)

    Lars Voll

    2015-04-01

    Full Text Available Adhesion between an elastomer and a steel indenter was studied experimentally and described with an analytical model. Cylindrical indenters having different roughness were brought into contact with an elastomer with various normal forces. After a “holding time”, the indenter was pulled with a constant velocity, which was the same in all experiments. We have studied the regime of relatively small initial normal loadings, large holding times and relatively large pulling velocities, so that the adhesive force did not depend on the holding time but did depend on the initially applied normal force and was approximately proportional to the pulling velocity. Under these conditions, we found that the adhesive force is inversely proportional to the roughness and proportional to the normal force. For the theoretical analysis, we used a previously published MDR-based model.

  4. The effect of bottom boundary condition type on the behavior of adhesive contact of spherical probe on an elastic film

    Science.gov (United States)

    Zhu, X.; Xu, W.

    2017-11-01

    This study presents an investigation on the behavior of adhesive contact between a rigid sphere and an elastic film which is either perfectly bonded (case I) or in frictionless contact (case II) with a rigid substrate. By using linear fracture mechanics, we formulate an convenient semi-analytical approach to develop relations between the applied force, penetration depth and contact radius. Finite element analysis (FEA) is used to verify the relationships. Our results reveal that the interfacial boundary conditions between the film and substrate have distinct effects on the adhesive contact behavior between the sphere and the film. The aim of the present study is to provide an instructive inspiration for controlling adhesion strength of the thin film subject to adhesive contact.

  5. Spanning From Atoms to Micrometers in Simulations of Contact, Adhesion and Friction

    Science.gov (United States)

    Robbins, Mark

    Improved understanding of the forces between realistic solid surfaces is needed to optimize adhesion and friction. Modeling these forces is challenging because they arise from interactions between atoms separated by less than a nanometer, but the number and spatial distribution of these contacting atoms depends on surface roughness and deformation on micrometer and larger scales. There are also strong scale effects in the role of elastic deformations along the surface. The talk will first describe a seamless Greens function (GF) method that allows a full treatment of elastic deformations and atomic contact for micrometer scale surfaces and multibody potentials. Next applications of the method to calculations of the contact area, contact stiffness, adhesion and friction for a range of geometries and interactions will be described. The results can be captured with simple analytic expressions and explain why most contacting surfaces do not adhere. Theoretical and experimental studies of single nanometer-scale asperities show that the frictional shear stress depends strongly on whether surfaces are commensurate. A large constant stress is obtained for identical, aligned crystalline surfaces, but the stress averages to zero in the more common case of incommensurate surfaces. The resulting ultralow friction is called superlubricity and is found in experiments and simulations of small contacts. Our simulations reveal dramatic changes in this behavior because different parts of the surface are able to advance independently as the contact radius increases towards micrometer scales. The friction between identical surfaces drops with increasing radius and then saturates at a low value. The force between incommensurate surfaces saturates at a similar value that can be related to the Peierls stress for dislocation motion at the interface. Studies of multiasperity contacts also show that incoherent motion along the interface can lead to pronounced changes in the macroscopic

  6. Liquid Adhesive Contact Dermatitis After Bunionectomy: A Case Report and Literature Review.

    Science.gov (United States)

    Hood, Christopher R; Cornell, Rhonda S; Greenfield, Bruce

    2016-01-01

    Hypersensitivity reactions to the skin adherents used in postoperative dressings are an uncommon but unfavorable complication that can result in poor wound healing, increased scarring, and surgical wound infections. This unexpected and unforeseen complication is not well documented in the current published data. We present the case of a 39-year-old female who had undergone a bunionectomy procedure and developed allergic contact dermatitis postoperatively. We discuss the clinical findings and treatments administered after application of a commonly used liquid skin adhesive applied intraoperatively. Through the use of topical and oral steroids and foot soaks in astringent solutions, over the course of several months, the patient's skin returned to the expected postoperative appearance. With the increased consciousness to minimize surgical scarring to improve cosmesis, one of these causes of the reaction might have been the liquid adhesive used in the surgical closure and dressing application. Therefore, we additionally reviewed the adhesive compound's chemical makeup and any potential cross-reactivity to help surgeons make an informed decision of whether to use a liquid adhesive. The various ingredients in liquid adhesives contain known allergen compounds that can cause a reaction, such as balsam of Peru and colophony or rosin, both of which are reviewed in our report. We also present a treatment algorithm developed from the compiled data in the case of a patient developing an allergic reaction. From our literature review and considering the percentage of incidence, if a surgeon desires to use a liquid adhesive product, Mastisol(®) should be chosen because of its lower reactivity and greater adhesive properties compared with the compound tincture of benzoin. Copyright © 2016 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

  7. ADHESIVE CONTACT SIMULATION OF ELASTIC SOLIDS USING LOCAL MESH-DEPENDENT DETACHMENT CRITERION IN BOUNDARY ELEMENTS METHOD

    Directory of Open Access Journals (Sweden)

    Roman Pohrt

    2015-04-01

    Full Text Available Using the concept of stress intensity factors, we suggest a way to include adhesion into boundary elements simulation of contacts. A local criterion concerning the maximum admissible surface stresses decides whether the adhesive bonds in particular grid points fail or not. By taking into account the grid spacing, a robust methodology is found. Validation is done using the theoretically derived cases of JKR adhesion.

  8. Allergic contact dermatitis from 2-hydroxyethyl methacrylate in an adhesive on an electrosurgical earthing plate.

    Science.gov (United States)

    Kanerva, L; Alanko, K

    1998-01-01

    A highly (meth)acrylate-allergic patient underwent surgery because of nodular struma. Three days after her operation she developed an itching dermatitis on her left thigh. She came to our attention 18 days after the operation, because of an oozing, highly pruritic dermatitis, 8 x 19 cm in width on her left thigh, at the site where an electrosurgical earthing plate had been used during the surgery. It was revealed that the pressure-sensitive adhesive of the pad contained 2-hydroxyethyl methacrylate (2-HEMA) to which the patient earlier had had an allergic patch test reaction. The patient was negative on patch testing to other (meth)acrylates present in the pad. Patients should be questioned about possible methacrylate sensitivity before methacrylate-containing electrosurgical earthing plates are used during surgery. Allergic contact dermatitis caused by acrylic adhesives is briefly reviewed.

  9. The role of type III secretion system and lens material on adhesion of Pseudomonas aeruginosa to contact lenses.

    Science.gov (United States)

    Shen, Elizabeth P; Tsay, Ruey-Yug; Chia, Jean-San; Wu, Semon; Lee, Jing-Wen; Hu, Fung-Rong

    2012-09-21

    To determine the distribution of invasive and cytotoxic genotypes among ocular isolates of P. aeruginosa and investigate the influence of the type III secretion system (T3SS) on adhesion to conventional, cosmetic, and silicone hydrogel contact lenses (CL). Clinical isolates from 2001 to 2010 were analyzed by multiplex PCR for exoS, exoU, and exoT genes. Bacterial adhesion to etafilcon, nelfilcon (gray colored), balafilcon, and galyfilcon CL with or without artificial tear fluid (ATF) incubation were compared. Surface characteristics were determined with scanning electron microscopy (SEM). Among 87 total isolates, 64 strains were from microbial keratitis cases. CL-related microbial keratitis (CLMK) isolates were mostly of the cytotoxic genotype (expressing exoU) (P = 0.002). No significant differences were found in bacterial adhesion to all types of CL between the genotypes under T3SS-inducing conditions. A trend for least bacterial adhesion of galyfilcon compared to the other CL was noted for both genotypes. Needle complex pscC mutants adhered less to all materials than the wild type (P contact lens adhesion. ATF-incubated CL had significantly more bacterial adhesion (P contact lens adhesion through complex interactions. Contact lens materials may also play an important role in the adherence of both genotypes of P. aeruginosa.

  10. Primary cilia utilize glycoprotein-dependent adhesion mechanisms to stabilize long-lasting cilia-cilia contacts

    Science.gov (United States)

    2012-01-01

    Background The central tenet of cilia function is sensing and transmitting information. The capacity to directly contact extracellular surfaces would empower primary cilia to probe the environment for information about the nature and location of nearby surfaces. It has been well established that flagella and other motile cilia perform diverse cellular functions through adhesion. We hypothesized that mammalian primary cilia also interact with the extracellular environment through direct physical contact. Methods We identified cilia in rod photoreceptors and cholangiocytes in fixed mouse tissues and examined the structures that these cilia contact in vivo. We then utilized an MDCK cell culture model to characterize the nature of the contacts we observed. Results In retina and liver tissue, we observed that cilia from nearby cells touch one another. Using MDCK cells, we found compelling evidence that these contacts are stable adhesions that form bridges between two cells, or networks between many cells. We examined the nature and duration of the cilia-cilia contacts and discovered primary cilia movements that facilitate cilia-cilia encounters. Stable adhesions form as the area of contact expands from a single point to a stretch of tightly bound, adjacent cilia membranes. The cilia-cilia contacts persisted for hours and were resistant to several harsh treatments such as proteases and DTT. Unlike many other cell adhesion mechanisms, calcium was not required for the formation or maintenance of cilia adhesion. However, swainsonine, which blocks maturation of N-linked glycoproteins, reduced contact formation. We propose that cellular control of adhesion maintenance is active because cilia adhesion did not prevent cell division; rather, contacts dissolved during mitosis as cilia were resorbed. Conclusions The demonstration that mammalian primary cilia formed prolonged, direct, physical contacts supports a novel paradigm: that mammalian primary cilia detect features of the

  11. Primary cilia utilize glycoprotein-dependent adhesion mechanisms to stabilize long-lasting cilia-cilia contacts

    Directory of Open Access Journals (Sweden)

    Ott Carolyn

    2012-04-01

    Full Text Available Abstract Background The central tenet of cilia function is sensing and transmitting information. The capacity to directly contact extracellular surfaces would empower primary cilia to probe the environment for information about the nature and location of nearby surfaces. It has been well established that flagella and other motile cilia perform diverse cellular functions through adhesion. We hypothesized that mammalian primary cilia also interact with the extracellular environment through direct physical contact. Methods We identified cilia in rod photoreceptors and cholangiocytes in fixed mouse tissues and examined the structures that these cilia contact in vivo. We then utilized an MDCK cell culture model to characterize the nature of the contacts we observed. Results In retina and liver tissue, we observed that cilia from nearby cells touch one another. Using MDCK cells, we found compelling evidence that these contacts are stable adhesions that form bridges between two cells, or networks between many cells. We examined the nature and duration of the cilia-cilia contacts and discovered primary cilia movements that facilitate cilia-cilia encounters. Stable adhesions form as the area of contact expands from a single point to a stretch of tightly bound, adjacent cilia membranes. The cilia-cilia contacts persisted for hours and were resistant to several harsh treatments such as proteases and DTT. Unlike many other cell adhesion mechanisms, calcium was not required for the formation or maintenance of cilia adhesion. However, swainsonine, which blocks maturation of N-linked glycoproteins, reduced contact formation. We propose that cellular control of adhesion maintenance is active because cilia adhesion did not prevent cell division; rather, contacts dissolved during mitosis as cilia were resorbed. Conclusions The demonstration that mammalian primary cilia formed prolonged, direct, physical contacts supports a novel paradigm: that mammalian primary

  12. Adhesions

    Science.gov (United States)

    Adhesions are bands of scar-like tissue. Normally, internal tissues and organs have slippery surfaces so they can shift easily as the body moves. Adhesions cause tissues and organs to stick together. They ...

  13. Contact-mechanical studies on adhesion of bio-inspired elastomeric nanofiber to stiff and soft materials

    Directory of Open Access Journals (Sweden)

    Dong Yun Lee

    2017-04-01

    Full Text Available The adhesion behavior of elastomeric nanofibers was examined by a contact-mechanical approach using a Johnson–Kendall–Roberts (JKR instrument. A nanofibrillar elastomer substrate was fabricated by replicating crosslinked polydimethylsiloxane (PDMS from an anodic aluminum oxide (AAO template. The adhesion behavior of a regular hexagonal array of PDMS nanofibers formed over a wide range was investigated using soft and stiff hemispherical probes, which were prepared using PDMS and polystyrene (PS, respectively. The intrinsic work of adhesion (W of the elastomeric nanofibrillar substrate was observed to substantially decrease, which was more prominent for the less deformable PS probe, revealing a reduction in the real contact area. Meanwhile, the adhesion energy (G in the dynamic state with increasing separation rate was greatly affected by the deformation of nanofibers. The energy-dissipation factor for the nanofibrillar surface was far larger than that for the flat surface, and this difference was more significant for the case of contact with the deformable PDMS probe. This resulted in a great increase in the adhesion energy, making it even larger than that of the flat surface, overcoming the reduction in the real contact area.

  14. A role for adhesion molecules in contact-dependent T help for B cells

    DEFF Research Database (Denmark)

    Owens, T

    1991-01-01

    The role of cell contact in T-dependent B cell activation was examined. Small resting B cells from C57BL/6 mice were cultured with CBA-derived, non-alloreactive cloned T helper cells in anti-T cell receptor V beta 8-coated microwells. This induced polyclonal B cell activation to enter cell cycle......, although proliferative responses were only inhibited to about 50%. Inhibitory monoclonal antibodies did not significantly affect lipopolysaccharide-induced responses. T cell activation to interleukin (IL) 3 secretion, nor did they inhibit the formation of multicellular clusters containing T and B cells....... There was no correlation between the level of expression of adhesion molecules by T cells and their ability to induce B cell responses. Anti-LFA-1 abrogated T-dependent responses to IL2 which were inducible after 2 days in culture, but did not inhibit the induction of this IL2 responsiveness. These results suggest...

  15. The method of contact angle measurements and estimation of work of adhesion in bioleaching of metals

    Directory of Open Access Journals (Sweden)

    Matlakowska Renata

    1999-01-01

    Full Text Available In this paper, we present our method for the measurement of contact angles on the surface of minerals during the bioleaching process because the standard deviation obtained in our measurements achieved unexpectedly low error. Construction of a goniometer connected with a specially prepared computer program allowed us to repeat measurements several times over a short time course, yielding excellent results. After defining points on the outline of the image of a drop and its baseline as well of the first approximation of the outline of the drop, an iterative process is initiated that is aimed at fitting the model of the drop and baseline. In turn, after defining the medium for which measurements were made, the work of adhesion is determined according to Young-Dupré equation. Calculations were made with the use of two methods named the L-M and L-Q methods.

  16. Acousto-optic deflector based on a paratellurite crystal using broadband acoustic adhesive contact

    Science.gov (United States)

    Antonov, S. N.

    2017-07-01

    A broadband acoustic matching of a piezoelectric transducer made of a lithium niobate crystal with an acousto-optic TeO2 crystal has been studied. The transducer is acoustically attached to the crystal by the method of adhesive contact. The experimental method of creating a piezoelectric transducer with an acoustic matching layer from a tin film is developed. The conditions of the optimal technological regime when applying the matching layer are determined. The results of the research are used in creating a broadband high-performance deflector with a central ultrasound frequency of 37 MHz, with the frequency band scanning more than 30 MHz, and a diffraction efficiency of about 90% at a wavelength of 1.06 μm.

  17. Design and Optimal Research of a Non-Contact Adjustable Magnetic Adhesion Mechanism for a Wall-Climbing Welding Robot

    Directory of Open Access Journals (Sweden)

    Minghui Wu

    2013-01-01

    Full Text Available Wall-climbing welding robots (WCWRs can replace workers in manufacturing and maintaining large unstructured equipment, such as ships. The adhesion mechanism is the key component of WCWRs. As it is directly related to the robot's ability in relation to adsorbing, moving flexibly and obstacle-passing. In this paper, a novel non-contact adjustably magnetic adhesion mechanism is proposed. The magnet suckers are mounted under the robot's axils and the sucker and wall are in non-contact. In order to pass obstacles, the sucker and the wheel unit can be pulled up and pushed down by a lifting mechanism. The magnetic adhesion force can be adjusted by changing the height of the gap between the sucker and the wall by the lifting mechanism. In order to increase the adhesion force, the value of the sucker's magnetic energy density (MED is maximized by optimizing the magnet sucker's structure parameters with a finite element method. Experiments prove that the magnetic adhesion mechanism has enough adhesion force and that the WCWR can complete wall-climbing work within a large unstructured environment.

  18. Adhesive Capabilities of Staphylococcus Aureus and Pseudomonas Aeruginosa Isolated from Tears of HIV/AIDS Patients to Soft Contact Lenses

    Science.gov (United States)

    B. O., Ajayi; F.E., Kio; F.D., Otajevwo

    2012-01-01

    Fifty conjunctival swab samples collected from ELISA confirmed HIV/AIDS seropositive patients who were referred to the HIV/AIDS laboratories of the University of Benin Teaching Hospital and Central Hospital both based in Benin City, Nigeria were aseptically cultured on appropriate media by standard methods. The resulting isolates/strains, after identification by standard methods, were tested for their ability to adhere to two hydrophobic non-ionic daily wear silicone hydrogel soft contact lenses (i.e. lotrafilcon B, WC 33% and polymacon, WC 38%) as well as to two hydrophilic ionic conventional extended wear silicone hydrogel soft contact lenses (i.e. methafilcon A, WC 55% and omafilcon A, WC 60%) by the adhesiveness/slime production modified vortex/Robin device method. Evidence of adhesiveness/slime production was indicated by presence of a visible stained film lining the surface of the contact lens which was measured and recorded as strong or weak according to the density of the adhered bacterial film. Fourteen (28.0%) Staphylococcus aureus strains and 10 (20.0%) Pseudomonas aeruginosa strains were obtained among other organisms. Staphylococcus aureus strains adhered in decreasing order to lotrafilcon B (55.4 ± 4.7), polymacon (46.4 ± 8.4), methfilcon A (46.4 ± 8.4) and omafilcon A (25.0 ± 6.4) with no significant difference in adhesive strengths of individual strains (P > 0.05). Pseudomonas aeruginosa strains also recorded decreasing adhesive strengths to lotrafilcon B (37.5 ± 8.2), polymacon (28.6 ± 6.3), methafilcon A (26.8 ± 5.5) and omafilcon A (23.2 ± 5.5) also with no significant difference in adhesive strengths of individual strains (P > 0.05). Attachment strengths of Staph. aureus strains to all four contact lenses were higher than those of Pseudomonas aeruginosa strains. Both organisms adhered most to hydrophobic lotrafilcon B and least to hydrophilic omafilcon A. This invitro adhesion studies revealed that daily wear silicone hydrogel low water

  19. Influence of wear and overwear on surface properties of etafilcon A contact lenses and adhesion of Pseudomonas aeruginosa

    NARCIS (Netherlands)

    Bruinsma, Gerda M; Rustema-Abbing, Mina; de Vries, Jacob; Stegenga, Boudewijn; van der Mei, Henderina; van der Linden, Matthijs L; Hooymans, Johanna MM; Busscher, Hendrik

    2002-01-01

    PURPOSE. To determine changes in physicochemical surface properties of contact tenses (CLs) during daily wear and effects of lens wear on adhesion of a Pseudomonas aeruginosa strain from a patient with CL-related keratitis. METHODS. Ten new CL wearers used ionic, etafilcon A lenses with 58% water on

  20. Redistribution of microfilament-associated proteins during the formation of focal contacts and adhesions in chick fibroblasts

    DEFF Research Database (Denmark)

    Couchman, J R; Badley, R A; Rees, D A

    1983-01-01

    The roles of the microfilament-associated proteins vinculin, alpha-actinin, myosin and filamin have been studied by immunofluorescence and double fluorescence in conjunction with interference reflection microscopy (IRM), during the development of focal contacts and focal adhesions in a chick...... the associated microfilament bundles. Indeed the appearance of small bodies containing alpha-actinin and vinculin is shown to precede focal contact formation in our model system and such structures (not visible by IRM) are proposed to be the precursors of focal contacts and adhesions. Myosin and filamin...... earlier of diffusely distributed myosin and filamin in the leading lamella. Although this is not initially associated with any change in the motile status of the cells, the recruitment of these microfilament-associated proteins into stress fibres is proposed to occur in preparation for anchorage...

  1. Hazardous Air Pollutant Free Replacement for Specification A-A-1936A Contact Adhesive

    Science.gov (United States)

    2014-02-01

    Standard Test Method for Apparent Shear Strength of Single- Lap -Joint Adhesively Bonded Metal Specimens by Tension Loading (metal to metal) with...the other hand, the Clifton CC-5527 (baseline) adhesive did not pass, but the lap shear strength was not significantly lower than the pass criterion...specification would be done to reduce the adhesion requirement. 3M-30NF and DAP NFCC had very low lap shear strengths and would likely not meet Army

  2. Construction of adhesion maps for contacts between a sphere and a half-space: Considering size effects of the sphere.

    Science.gov (United States)

    Zhang, Yuyan; Wang, Xiaoli; Li, Hanqing; Yang, Weixu

    2015-11-15

    Previous adhesion maps, such as the JG (Johnson-Greenwood) and YCG (Yao-Ciavarella-Gao) maps, are used to guide the selection of Bradley, DMT, M-D, JKR and Hertz models. However, when the size of the contact sphere decreases to the small scale, the applicability of JG and YCG maps is limited because the assumptions regarding the contact region profile, interaction between contact bodies and sphere shape in the classical models constituting these two maps are no longer valid. To avoid this limitation, in this paper, a new numerical model considering size effects of the sphere is established first and then introduced into the new adhesion maps together with the YGG (Yao-Guduru-Gao) model and Hertz model. Regimes of these models in the new map under a certain sphere radius are demarcated by the criteria related to the relative force differences and the ratio of contact radius to sphere radius. In addition, the approaches at pull-off, jump-in and jump-out for different Tabor parameters and sphere radii are provided in the new maps. Finally, to make the new maps more feasible, the numerical results of approaches, force and contact radius involved in the maps are formularized by using the piecewise fitting. Copyright © 2015 Elsevier Inc. All rights reserved.

  3. Functional adhesive surfaces with “gecko” effect: the concept of contact splitting

    NARCIS (Netherlands)

    Kamperman, M.M.G.; Kroner, E.; Campo, del A.; McMeeking, R.M.; Arzt, E.

    2010-01-01

    Nature has developed reversibly adhesive surfaces whose stickiness has attracted much research attention over the last decade. The central lesson from nature is that “patterned” or “fibrillar” surfaces can produce higher adhesion forces to flat and rough substrates than smooth surfaces. This paper

  4. Adhesion of Pseudomonas aeruginosa and Staphylococcus epidermidis to silicone-hydrogel contact lenses

    National Research Council Canada - National Science Library

    Henriques, Mariana; Sousa, Cláudia; Lira, Madalena; Elisabete, M; Oliveira, Real; Oliveira, Rosário; Azeredo, Joana

    2005-01-01

    The purpose of this study is to compare the adhesion capabilities of the most important etiologic agents of microbial ocular infection to the recently available silicone-hydrogel lenses with those to...

  5. Adhesive contact of a rigid circular cylinder to a soft elastic substrate--the role of surface tension.

    Science.gov (United States)

    Liu, Tianshu; Jagota, Anand; Hui, Chung-Yuen

    2015-05-21

    This article studies the effects of surface tension on the adhesive contact mechanics of a long rigid cylinder on an infinite half space comprising an incompressible elastic material. We present an exact solution based on small strain theory. The relationship between the indentation force and contact width was found to depend on a single dimensionless parameter ω = σ/[4(μR)(2/3)(W(ad)/2π)(1/3'), where R is the cylinder radius, Wad is the interfacial work of adhesion, and σ and μ are the surface tension and shear modulus of the half space, respectively. For small ω the solution reduces to the classical Johnson-Kendall-Roberts (JKR) theory, whereas for large ω the solution reduces to the small slope version of the Young-Dupre equation. The pull-off phenomenon was carefully examined and it was found that the contact width at pull-off reduces to zero when surface tension is larger than a critical value.

  6. Sequence of oral bacterial co-adhesion and non-contact brushing

    NARCIS (Netherlands)

    van der Mei, H. C.; Rustema-Abbing, M.; Bruinsma, G. M.; Gottenbos, B.; Busscher, H. J.

    Non-contact plaque removal offers advantages in interproximal spaces, fissures, and pockets. It requires the generation of strong fluid flows and the inclusion of air bubbles to become effective. A pair of co-adhering streptococci and actinomyces has been used previously to demonstrate non-contact

  7. Risk assessment derived from migrants identified in several adhesives commonly used in food contact materials.

    Science.gov (United States)

    Canellas, E; Vera, P; Nerín, C

    2015-01-01

    Adhesives are used to manufacture multilayer materials, where their components pass through the layers and migrate to the food. Nine different adhesives (acrylic, vinyl and hotmelt) and their migration in 21 laminates for future use as market samples have been evaluated and risk assessment has been carried out. A total of 75 volatiles and non volatile compounds were identified by gas chromatography-mass spectrometry and ultra-performance liquid chromatography coupled to quadrupole time-of-flight mass spectrometry. Most of the compounds migrated below their specific migration limit (SML), lowest observed adverse effect level (LOAEL), no observed adverse effect level (NOAEL) and values recommended by Cramer. Six compounds classified as high toxicity class III according to Cramer classification, migrated over their SML and exposure values recommended by Cramer, when they were applied in the full area of the packaging. Nevertheless, these adhesives fulfill the threshold in the real application as they are applied in a small area of the packaging. Copyright © 2014 Elsevier Ltd. All rights reserved.

  8. Increased DC trafficking to lymph nodes and contact hypersensitivity in junctional adhesion molecule-A–deficient mice

    Science.gov (United States)

    Cera, Maria Rosaria; Del Prete, Annalisa; Vecchi, Annunciata; Corada, Monica; Martin-Padura, Ines; Motoike, Toshiyuki; Tonetti, Paolo; Bazzoni, Gianfranco; Vermi, William; Gentili, Francesca; Bernasconi, Sergio; Sato, Thomas N.; Mantovani, Alberto; Dejana, Elisabetta

    2004-01-01

    Junctional adhesion molecule-A (JAM-A) is a transmembrane adhesive protein expressed at endothelial junctions and in leukocytes. In the present work, we found that DCs also express JAM-A. To evaluate the biological relevance of this observation, Jam-A–/– mice were generated and the functional behavior of DCs in vitro and in vivo was studied. In vitro, Jam-A–/– DCs showed a selective increase in random motility and in the capacity to transmigrate across lymphatic endothelial cells. In vivo, Jam-A–/– mice showed enhanced DC migration to lymph nodes, which was not observed in mice with endothelium-restricted deficiency of the protein. Furthermore, increased DC migration to lymph nodes was associated with enhanced contact hypersensitivity (CHS). Adoptive transfer experiments showed that JAM-A–deficient DCs elicited increased CHS in Jam-A+/+ mice, further supporting the concept of a DC-specific effect. Thus, we identified here a novel, non-redundant role of JAM-A in controlling DC motility, trafficking to lymph nodes, and activation of specific immunity. PMID:15343392

  9. Diminished adhesion and activation of platelets and neutrophils with CD47 functionalized blood contacting surfaces.

    Science.gov (United States)

    Finley, Matthew J; Rauova, Lubica; Alferiev, Ivan S; Weisel, John W; Levy, Robert J; Stachelek, Stanley J

    2012-08-01

    CD47 is a ubiquitously expressed transmembrane protein that, through signaling mechanisms mediated by signal regulatory protein alpha (SIRPα1), functions as a biological marker of 'self-recognition'. We showed previously that inflammatory cell attachment to polymeric surfaces is inhibited by the attachment of biotinylated recombinant CD47 (CD47B). We test herein the hypothesis that CD47 modified blood conduits can reduce platelet and neutrophil activation under clinically relevant conditions. We appended a poly-lysine tag to the C-terminus of recombinant CD47 (CD47L) allowing for covalent linkage to the polymer. SIRPα1 expression was confirmed in isolated platelets. We then compared biocompatibility between CD47B and CD47L functionalized polyvinyl chloride (PVC) surfaces and unmodified control PVC surfaces. Quantitative and Qualitative analysis of blood cell attachment to CD47B and CD47L surfaces, via scanning electron microscopy, showed strikingly fewer platelets attached to CD47 modified surfaces compared to control. Flow cytometry analysis showed that activation markers for neutrophils (CD62L) and platelets (CD62P) exposed to CD47 modified PVC were equivalent to freshly acquired control blood, while significantly elevated in the unmodified PVC tubing. In addition, ethylene oxide gas sterilization did not inhibit the efficacy of the CD47 modification. In conclusion, CD47 modified PVC inhibits both the adhesion and activation of platelets and neutrophils. Copyright © 2012 Elsevier Ltd. All rights reserved.

  10. Diminished adhesion and activation of platelets and neutrophils with CD47-functionalized blood contacting surfaces

    Science.gov (United States)

    Finley, Matthew J.; Rauova, Lubica; Alferiev, Ivan S.; Weisel, John W.; Levy, Robert J.; Stachelek, Stanley J.

    2012-01-01

    CD47 is a ubiquitously expressed transmembrane protein that, through signaling mechanisms mediated by signal regulatory protein alpha (SIRPα1), functions as a biological marker of ‘self-recognition’. We showed previously that inflammatory cell attachment to polymeric surfaces is inhibited by the attachment of biotinylated recombinant CD47 (CD47B). We test herein the hypothesis that CD47-modified blood conduits can reduce platelet and neutrophil activation under clinically relevant conditions. We appended a poly-lysine tag to the C-terminus of recombinant CD47 (CD47L) allowing for covalent linkage to the polymer. SIRPα1 expression was confirmed in isolated platelets. We then compared biocompatibility between CD47B and CD47L functionalized polyvinyl chloride (PVC) surfaces and unmodified control PVC surfaces. Quantitative and Qualitative analysis of blood cell attachment to CD47B and CD47L surfaces, via scanning electron microscopy, showed strikingly fewer platelets attached to CD47 modified surfaces compared to control. Flow cytometry analysis showed that activation markers for neutrophils (CD62L) and platelets (CD62P) exposed to CD47 modified PVC were equivalent to freshly acquired control blood, while significantly elevated in the unmodified PVC tubing. In addition, ethylene oxide gas sterilization did not inhibit the efficacy of the CD47 modification. In conclusion, CD47 modified PVC inhibits both the adhesion and activation of platelets and neutrophils. PMID:22613135

  11. Identification of some nonsmooth evolution systems with illustration on adhesive contacts at small strains

    Czech Academy of Sciences Publication Activity Database

    Adam, Lukáš; Outrata, Jiří; Roubíček, Tomáš

    2017-01-01

    Roč. 66, č. 12 (2017), s. 2025-2049 ISSN 0233-1934 R&D Projects: GA ČR GA14-15264S; GA ČR GA13-18652S; GA ČR GAP201/10/0357; GA ČR(CZ) GAP201/12/0671 Grant - others:GA UK(CZ) SVV 260225/2015 Institutional support: RVO:67985556 ; RVO:61388998 Keywords : rate-independent systems * optimal control * identification * fractional-step time discretization * quadratic programming * gradient evaluation * variational analysis * implicit programming approach * limiting subdifferential * coderivative * nonsmooth contact mechanics * delamination Subject RIV: BA - General Mathematics; BA - General Mathematics (UT-L) Impact factor: 0.943, year: 2016 http:// library .utia.cas.cz/separaty/2016/MTR/adam-0453289.pdf

  12. Effect of fluorocarbon self-assembled monolayer films on sidewall adhesion and friction of surface micromachines with impacting and sliding contact interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Xiang, H.; Komvopoulos, K. [Department of Mechanical Engineering, University of California, Berkeley, California 94720 (United States)

    2013-06-14

    A self-assembled monolayer film consisting of fluoro-octyltrichlorosilane (FOTS) was vapor-phase deposited on Si(100) substrates and polycrystalline silicon (polysilicon) surface micromachines. The hydrophobic behavior and structural composition of the FOTS film deposited on Si(100) were investigated by goniometry and X-ray photoelectron spectroscopy, respectively. The effects of contact pressure, relative humidity, temperature, and impact/sliding cycles on the adhesive and friction behavior of uncoated and FOTS-coated polysilicon micromachines (referred to as the Si and FOTS/Si micromachines, respectively) were investigated under controlled loading and environmental conditions. FOTS/Si micromachines demonstrated much lower and stable adhesion than Si micromachines due to the highly hydrophobic and conformal FOTS film. Contrary to Si micromachines, sidewall adhesion of FOTS/Si micromachines demonstrated a weak dependence on relative humidity, temperature, and impact cycles. In addition, FOTS/Si micromachines showed low and stable adhesion and low static friction for significantly more sliding cycles than Si micromachines. The adhesive and static friction characteristics of Si and FOTS/Si micromachines are interpreted in the context of physicochemical surface changes, resulting in the increase of the real area of contact and a hydrophobic-to-hydrophilic transition of the surface chemical characteristics caused by nanoscale surface smoothening and the removal of the organic residue (Si micromachines) or the FOTS film (FOTS/Si micromachines) during repetitive impact and oscillatory sliding of the sidewall surfaces.

  13. A three-phase in-vitro system for studying Pseudomonas aeruginosa adhesion and biofilm formation upon hydrogel contact lenses

    Directory of Open Access Journals (Sweden)

    Kohlmann Thomas

    2010-11-01

    Full Text Available Abstract Background Pseudomonas aeruginosa is commonly associated with contact lens (CL -related eye infections, for which bacterial adhesion and biofilm formation upon hydrogel CLs is a specific risk factor. Whilst P. aeruginosa has been widely used as a model organism for initial biofilm formation on CLs, in-vitro models that closely reproduce in-vivo conditions have rarely been presented. Results In the current investigation, a novel in-vitro biofilm model for studying the adherence of P. aeruginosa to hydrogel CLs was established. Nutritional and interfacial conditions similar to those in the eye of a CL wearer were created through the involvement of a solid:liquid and a solid:air interface, shear forces and a complex artificial tear fluid. Bioburdens varied depending on the CL material and biofilm maturation occurred after 72 h incubation. Whilst a range of biofilm morphologies were visualised including dispersed and adherent bacterial cells, aggregates and colonies embedded in extracellular polymer substances (EPS, EPS fibres, mushroom-like formations, and crystalline structures, a compact and heterogeneous biofilm morphology predominated on all CL materials. Conclusions In order to better understand the process of biofilm formation on CLs and to test the efficacy of CL care solutions, representative in-vitro biofilm models are required. Here, we present a three-phase biofilm model that simulates the environment in the eye of a CL wearer and thus generates biofilms which resemble those commonly observed in-situ.

  14. In vivo confocal microscopy: increased conjunctival or episcleral leukocyte adhesion in patients who wear contact lenses with lower oxygen permeability (Dk) values.

    Science.gov (United States)

    Nguyen, Thuy H; Dudek, Lara T; Krisciunas, Tammie C; Matiaco, Paul; Planck, Stephen R; Mathers, William D; Rosenbaum, James T

    2004-10-01

    Contact lens wear is known to threaten the health of the ocular surface. In vivo confocal microscopy (IVCM) to visualize leukocyte rolling and extravasation in inflammation was recently described. We tested the hypothesis that contact lens wear is associated with measurable inflammation in superficial vessels. Leukocyte rolling and sticking (hallmarks of the inflammatory process) were recorded by IVCM. IVCM was performed on conjunctival or episcleral blood vessels bilaterally on 55 contact lens wearers (15 male, 40 female) and 22 non-contact lens wearers (8 male, 14 female). Data were analyzed in 2 ways. Considering each vessel as an independent variable resulted in 132 analyzable vessel segments (13 daily disposable contact lenses, 67 traditional contact lenses, 14 rigid gas-permeable lenses, and 38 controls). Considering each subject as an independent variable resulted in analyzable data for 47 subjects (5 daily disposable contact lens wearers, 22 traditional contact lens wearers, 5 rigid contact lens wearers, and 15 control patients). Free-flowing, sticking, and rolling cells were counted in the vessels. Multiple parameters including mean flow velocity, shear rate, rolling cells/mm/min, and sticking cells/mm were calculated. We found no significant difference in leukocyte adhesion between control patients and patients wearing daily disposable, traditional disposable, or rigid gas-permeable lenses in both types of statistical analyses. However, the data regarding vessel segments as an independent variable show that there were more rolling cells in patients who wore contact lenses with oxygen permeability values (Dk) less than 10 as compared to those who wore contact lenses with oxygen permeability values greater than 16 (P oxygen permeability.

  15. Establishing contact between cell-laden hydrogels and metallic implants with a biomimetic adhesive for cell therapy supported implants.

    Science.gov (United States)

    Barthes, Julien; Mutschler, Angela; Dollinger, Camille; Gaudinat, Guillaume; Lavalle, Philippe; Le Houerou, Vincent; Brian McGuinness, Garrett; Engin Vrana, Nihal

    2017-12-15

    For in-dwelling implants, controlling the biological interface is a crucial parameter to promote tissue integration and prevent implant failure. For this purpose, one possibility is to facilitate the establishment of the interface with cell-laden hydrogels fixed to the implant. However, for proper functioning, the stability of the hydrogel on the implant should be ensured. Modification of implant surfaces with an adhesive represents a promising strategy to promote the adhesion of a cell-laden hydrogel on an implant. Herein, we developed a peptidic adhesive based on mussel foot protein (L-DOPA-L-lysine)2-L-DOPA that can be applied directly on the surface of an implant. At physiological pH, unoxidized (L-DOPA-L-lysine)2-L-DOPA was supposed to strongly adhere to metallic surfaces but it only formed a very thin coating (less than 1 nm). Once oxidized at physiological pH, (L-DOPA-L-lysine)2-L-DOPA forms an adhesive coating about 20 nm thick. In oxidized conditions, L-lysine can adhere to metallic substrates via electrostatic interaction. Oxidized L-DOPA allows the formation of a coating through self-polymerization and can react with amines so that this adhesive can be used to fix extra-cellular matrix based materials on implant surfaces through the reaction of quinones with amino groups. Hence, a stable interface between a soft gelatin hydrogel and metallic surfaces was achieved and the strength of adhesion was investigated. We have shown that the adhesive is non-cytotoxic to encapsulated cells and enabled the adhesion of gelatin soft hydrogels for 21 days on metallic substrates in liquid conditions. The adhesion properties of this anchoring peptide was quantified by a 180° peeling test with a more than 60% increase in peel strength in the presence of the adhesive. We demonstrated that by using a biomimetic adhesive, for the application of cell-laden hydrogels to metallic implant surfaces, the hydrogel/implant interface can be ensured without relying on the properties

  16. Experimental and Numerical Simulation of Wheel-Rail Adhesion and Wear Using a Scaled Roller Rig and a Real-Time Contact Code

    Directory of Open Access Journals (Sweden)

    Nicola Bosso

    2014-01-01

    Full Text Available The work shows the use of a scaled roller rig to validate a real time wheel-rail contact code developed to study the wheel rail adhesion and the wear evolution. The code allows the profiles to change at each time step in order to take into account the material loss due to the wear process. The contact code replicates a testing machine composed of a roller rig with a prototype of a single suspended wheelset pressed onto it with a variable load. The roller rig, developed at Politecnico di Torino, is used to validate and optimize the contact code referring to experimental data directly measured in real time. The test bench, in fact, allows measurement of specific kinematical quantities and forces that are elaborated by the real-time code in order to produce numerical results for comparison with the experimental ones. This approach can be applied both to the determination of wheel-rail adhesion and to the wear process. The test rig is also equipped with a laser profilometer that allows measurement of the wheel and rail profiles with a very high accuracy.

  17. Influence of day and night wear on surface properties of silicone hydrogel contact lenses and bacterial adhesion

    NARCIS (Netherlands)

    Vermeltfoort, Petronella; Rustema-Abbing, Mina; de Vries, Jacob; Bruinsma, Gerda M; Busscher, Hendrik; van der Linden, Matthijs L; Hooymans, Johanna MM; van der Mei, Henderina

    Purpose: The aim of this study was to determine the effect of continuous wear on physicochemical surface properties of silicone hydrogel (S-H) lenses and their susceptibility to bacterial adhesion. Methods: In this study, volunteers wore 2 pairs of either "lotrafilcon A" or "balafilcon A" S-H

  18. ATR-FTIR spectroscopy study of the influence of pH and contact time on the adhesion of Shewanella putrefaciens bacterial cells to the surface of hematite.

    Science.gov (United States)

    Elzinga, Evert J; Huang, Jen-How; Chorover, Jon; Kretzschmar, Ruben

    2012-12-04

    Attachment of live cells of Shewanella putrefaciens strain CN-32 to the surface of hematite (α-Fe(2)O(3)) was studied with in situ ATR-FTIR spectroscopy at variable pH (4.5-7.7) and contact times up to 24 h. The IR spectra indicate that phosphate based functional groups on the cell wall play an important role in mediating adhesion through formation of inner-sphere coordinative bonds to hematite surface sites. The inner-sphere attachment mode of microbial P groups varies with pH, involving either a change in protonation or in coordination to hematite surface sites as pH is modified. At all pH values, spectra collected during the early stages of adhesion show intense IR bands associated with reactive P-groups, suggestive of preferential coordination of P-moieties at the hematite surface. Spectra collected after longer sorption times show distinct frequencies from cell wall protein and carboxyl groups, indicating that bacterial adhesion occurring over longer time scales is to a lesser degree associated with preferential attachment of P-based bacterial functional groups to the hematite surface. The results of this study demonstrate that pH and reaction time influence cell-mineral interactions, implying that these parameters play an important role in determining cell mobility and biofilm formation in aqueous geochemical environments.

  19. Adhesion Improvement and Characterization of Magnetron Sputter Deposited Bilayer Molybdenum Thin Films for Rear Contact Application in CIGS Solar Cells

    Directory of Open Access Journals (Sweden)

    Weimin Li

    2016-01-01

    Full Text Available Molybdenum (Mo thin films are widely used as rear electrodes in copper indium gallium diselenide (CIGS solar cells. The challenge in Mo deposition by magnetron sputtering lies in simultaneously achieving good adhesion to the substrates while retaining the electrical and optical properties. Bilayer Mo films, comprising five different thickness ratios of a high pressure (HP deposited bottom layer and a low pressure (LP deposited top layer, were deposited on 40 cm × 30 cm soda-lime glass substrates by DC magnetron sputtering. We focus on understanding the effects of the individual layer properties on the resulting bilayer Mo films, such as microstructure, surface morphology, and surface oxidation. We show that the thickness of the bottom HP Mo layer plays a major role in determining the micromechanical and physical properties of the bilayer Mo stack. Our studies reveal that a thicker HP Mo bottom layer not only improves the adhesion of the bilayer Mo, but also helps to improve the film crystallinity along the preferred [110] direction. However, the surface roughness and the porosity of the bilayer Mo films are found to increase with increasing bottom layer thickness, which leads to lower optical reflectance and a higher probability for oxidation at the Mo surface.

  20. Occupational allergic contact dermatitis from 2-hydroxyethyl methacrylate and ethylene glycol dimethacrylate in a modified acrylic structural adhesive.

    Science.gov (United States)

    Kanerva, L; Jolanki, R; Leino, T; Estlander, T

    1995-08-01

    Acrylates have a broad area of application in various products including glues, sealants and adhesives. Whereas anaerobic acrylic sealants are well-known sensitizers, acrylate glues that cure in air have only seldom been reported as allergens. Here a patient sensitized to such a glue, and developing hand dermatitis that spread to the lower arms, chest, neck and face, is presented. Her glue was analyzed by gas chromatography/mass spectrometry (GC/MS) and contained 24.6% 2-hydroxyethyl methacrylate (2-HEMA) and 0.4% ethylene glycol dimethacrylate (EGDMA). These 2 acrylate compounds, as well as her glue, provoked an allergic patch test reaction. Also many other acrylate compounds, e.g., tetrahydrofurfuryl methacrylate, gave an allergic reaction indicating cross-allergy. The patient could not continue in her previous workplace because of severely relapsing skin symptoms.

  1. Dengue Virus-Infected Dendritic Cells, but Not Monocytes, Activate Natural Killer Cells through a Contact-Dependent Mechanism Involving Adhesion Molecules

    Directory of Open Access Journals (Sweden)

    Vivian Vasconcelos Costa

    2017-08-01

    Full Text Available Natural killer (NK cells play a protective role against dengue virus (DENV infection, but the cellular and molecular mechanisms are not fully understood. Using an optimized humanized mouse model, we show that human NK cells, through the secretion of gamma interferon (IFN-γ, are critical in the early defense against DENV infection. Depletion of NK cells or neutralization of IFN-γ leads to increased viremia and more severe thrombocytopenia and liver damage in humanized mice. In vitro studies using autologous human NK cells show that DENV-infected monocyte-derived dendritic cells (MDDCs, but not monocytes, activate NK cells in a contact-dependent manner, resulting in upregulation of CD69 and CD25 and secretion of IFN-γ. Blocking adhesion molecules (LFA-1, DNAM-1, CD2, and 2β4 on NK cells abolishes NK cell activation, IFN-γ secretion, and the control of DENV replication. NK cells activated by infected MDDCs also inhibit DENV infection in monocytes. These findings show the essential role of human NK cells in protection against acute DENV infection in vivo, identify adhesion molecules and dendritic cells required for NK cell activation, and delineate the sequence of events for NK cell activation and protection against DENV infection.

  2. Migration of periodontal ligament fibroblasts on nanometric topographical patterns: influence of filopodia and focal adhesions on contact guidance.

    Directory of Open Access Journals (Sweden)

    Douglas W Hamilton

    Full Text Available Considered to be the "holy grail" of dentistry, regeneration of the periodontal ligament in humans remains a major clinical problem. Removal of bacterial biofilms is commonly achieved using EDTA gels or lasers. One side effect of these treatment regimens is the etching of nanotopographies on the surface of the tooth. However, the response of periodontal ligament fibroblasts to such features has received very little attention. Using laser interference lithography, we fabricated precisely defined topographies with continuous or discontinuous nanogrooves to assess the adhesion, spreading and migration of PDL fibroblasts. PDL fibroblasts adhered to and spread on all tested surfaces, with initial spreading and focal adhesion formation slower on discontinuous nanogrooves. Cells had a significantly smaller planar area on both continuous and discontinuous nanogrooves in comparison with cells on non-patterned controls. At 24 h post seeding, cells on both types of nanogrooves were highly elongated parallel to the groove long axis. Time-lapse video microscopy revealed that PDL fibroblast movement was guided on both types of grooves, but migration velocity was not significantly different from cells cultured on non-patterned controls. Analysis of filopodia formation using time-lapse video microscopy and labeling of vinculin and F-actin revealed that on nanogrooves, filopodia were highly aligned at both ends of the cell, but with increasing time filopodia and membrane protrusions developed at the side of the cell perpendicular to the cell long axis. We conclude that periodontal ligament fibroblasts are sensitive to nanotopographical depths of 85-100 µm, which could be utilized in regeneration of the periodontal ligament.

  3. Single-asperity contact mechanics with positive and negative work of adhesion: Influence of finite-range interactions and a continuum description for the squeeze-out of wetting fluids.

    Science.gov (United States)

    Müser, Martin H

    2014-01-01

    In this work, single-asperity contact mechanics is investigated for positive and negative work of adhesion Δγ. In the latter case, finite-range repulsion acts in addition to hard-wall constraints. This constitutes a continuum model for a contact immersed in a strongly wetting fluid, which can only be squeezed out in the center of the contact through a sufficiently large normal load F N. As for positive work of adhesion, two stable solutions can coexist in a finite range of normal loads. The competing solutions can be readily interpreted as contacts with either a load-bearing or a squeezed-out fluid. The possibility for coexistence and the subsequent discontinuous wetting and squeeze-out instabilities depend not only on the Tabor coefficient μT but also on the functional form of the finite-range repulsion. For example, coexistence and discontinuous wetting or squeeze-out do not occur when the repulsion decreases exponentially with distance. For positive work of adhesion, the normal displacement mainly depends on F N, Δγ, and μT but - unlike the contact area - barely on the functional form of the finite-range attraction. The results can benefit the interpretation of atomic force microscopy in liquid environments and the modeling of multi-asperity contacts.

  4. Contact solid-phase microextraction with uncoated glass and polydimethylsiloxane-coated fibers versus solvent sampling for the determination of hydrocarbons in adhesion secretions of Madagascar hissing cockroaches Gromphadorrhina portentosa (Blattodea) by gas chromatography-mass spectrometry.

    Science.gov (United States)

    Gerhardt, Heike; Schmitt, Christian; Betz, Oliver; Albert, Klaus; Lämmerhofer, Michael

    2015-04-03

    Molecular profiles of adhesion secretions of Gromphadorrhina portentosa (Madagascar hissing cockroach, Blattodea) were investigated by gas chromatography mass spectrometry with particular focus on a comprehensive analysis of linear and branched hydrocarbons. For this purpose, secretions from the tarsi (feet), possibly contributing to adhesion on smooth surfaces, and control samples taken from the tibiae (lower legs), which contain general cuticular hydrocarbons that are supposed to be not involved in the biological adhesion function, were analyzed and their molecular fingerprints compared. A major analytical difficulty in such a study constitutes the representative, spatially controlled, precise and reproducible sampling from a living insect as well as the minute quantities of insect secretions on both tarsi and tibiae. Thus, three different in vivo sampling methods were compared in terms of sampling reproducibility and extraction efficiency by replicate measurement of samples from tarsi and tibiae. While contact solid-phase microextraction (SPME) with a polydimethylsiloxane (PDMS) fiber showed higher peak intensities, a self-made uncoated glass fiber had the best repeatability in contact-SPME sampling. Chromatographic profiles of these two contact-SPME sampling methods were statistically not significantly different. Inter-individual variances were larger than potentially existing minor differences in molecular patterns of distinct sampling methods. Sampling by solvent extraction was time consuming, showed lower sensitivities and was less reproducible. In general, sampling by contact-SPME with a cheap glass fiber turned out to be a viable alternative to PDMS-SPME sampling. Hydrocarbon patterns of the tarsal adhesion secretions were qualitatively similar to those of epicuticular hydrocarbon profiles of the tibiae. However, hydrocarbons were in general less abundant in tarsal secretions than secretions from tibiae. Copyright © 2015 Elsevier B.V. All rights reserved.

  5. Shear stress-dependent downregulation of the adhesion-G protein-coupled receptor CD97 on circulating leukocytes upon contact with its ligand CD55

    NARCIS (Netherlands)

    Karpus, Olga N.; Veninga, Henrike; Hoek, Robert M.; Flierman, Dennis; van Buul, Jaap D.; Vandenakker, Corianne C.; VanBavel, Ed; Medof, M. Edward; van Lier, René A. W.; Reedquist, Kris A.; Hamann, Jörg

    2013-01-01

    Adhesion G protein-coupled receptors (aGPCRs) are two-subunit molecules, consisting of an adhesive extracellular α subunit that couples noncovalently to a seven-transmembrane β subunit. The cooperation between the two subunits and the effect of endogenous ligands on the functioning of aGPCRs is

  6. Adhesion on Nanoorganized Multilayers

    Directory of Open Access Journals (Sweden)

    Yolla Kazzi

    2011-01-01

    Full Text Available Nanostructured multilayers composed of alternate organic (alkyldithiol and metallic (gold layers are grafted onto glass plates and prepared in order to modify the mechanical and local dissipative properties of a thin surface layer of the substrate. The adhesion phenomenon between a polyisoprene elastomer and these layers is presented and verified by two theories, namely, Johnson, Kendall, Roberts (JKR and linear elastic fracture mechanics. The increase in adhesion with contact time following a power law has been clearly noted.

  7. [Adhesion molecules and cancer].

    Science.gov (United States)

    Pierres, A; Benoliel, A M; Bongrand, P

    1999-12-01

    This review was aimed at summarizing recent advances in the understanding of cell adhesion in order to discuss the possible relevance of new knowledge to the exploration of cancer patients and elaboration of therapeutic strategies. During the last 10 years, many adhesion molecules were identified, thus allowing to determine their tissue distribution and functional regulation. The concept of adhesiveness was refined. It is now well known that adhesive rate (i.e., the minimal contact time required for bond formation) and binding strength (i.e., the minimal force required to detach bound cells) are distinct parameters. They may be regulated independently, and influence the cell behavior in different ways. It is now possible to achieve accurate control of tumor cell adhesiveness, either by inhibiting an adhesive mechanism (through monoclonal antibodies, competitive ligands, or inhibition of receptor expression with antisense strategy or gene knock-out) or by promoting a binding mechanism (with receptor transfection or pro-inflammatory stimulation). Recent progress opens new possibilities for diagnosis and treatment. First, the interpretation of experimental data may be improved. Cell adhesive behavior is not entirely accounted for by the density of membrane adhesion receptors. Indeed, adhesion is influenced by receptor connection to the cytoskeleton and structure of the cell coat. An adhesion receptor may be anti-metastatic through an increase in tumor cohesion and cell differentiation, or pro-metastatic, through facilitation of cell migration towards a target tissue. New therapeutic strategies may include anti-adhesive procedure aimed at preventing metastasis formation. The potential importance of a better control of inflammatory processes is also emphasized in view of the influence of these processes on the expression of adhesion molecules.

  8. Mapping cell surface adhesion by rotation tracking and adhesion footprinting

    Science.gov (United States)

    Li, Isaac T. S.; Ha, Taekjip; Chemla, Yann R.

    2017-03-01

    Rolling adhesion, in which cells passively roll along surfaces under shear flow, is a critical process involved in inflammatory responses and cancer metastasis. Surface adhesion properties regulated by adhesion receptors and membrane tethers are critical in understanding cell rolling behavior. Locally, adhesion molecules are distributed at the tips of membrane tethers. However, how functional adhesion properties are globally distributed on the individual cell’s surface is unknown. Here, we developed a label-free technique to determine the spatial distribution of adhesive properties on rolling cell surfaces. Using dark-field imaging and particle tracking, we extract the rotational motion of individual rolling cells. The rotational information allows us to construct an adhesion map along the contact circumference of a single cell. To complement this approach, we also developed a fluorescent adhesion footprint assay to record the molecular adhesion events from cell rolling. Applying the combination of the two methods on human promyelocytic leukemia cells, our results surprisingly reveal that adhesion is non-uniformly distributed in patches on the cell surfaces. Our label-free adhesion mapping methods are applicable to the variety of cell types that undergo rolling adhesion and provide a quantitative picture of cell surface adhesion at the functional and molecular level.

  9. Switchable bio-inspired adhesives

    Science.gov (United States)

    Kroner, Elmar

    2015-03-01

    Geckos have astonishing climbing abilities. They can adhere to almost any surface and can run on walls and even stick to ceilings. The extraordinary adhesion performance is caused by a combination of a complex surface pattern on their toes and the biomechanics of its movement. These biological dry adhesives have been intensely investigated during recent years because of the unique combination of adhesive properties. They provide high adhesion, allow for easy detachment, can be removed residue-free, and have self-cleaning properties. Many aspects have been successfully mimicked, leading to artificial, bio-inspired, patterned dry adhesives, and were addressed and in some aspects they even outperform the adhesion capabilities of geckos. However, designing artificial patterned adhesion systems with switchable adhesion remains a big challenge; the gecko's adhesion system is based on a complex hierarchical surface structure and on advanced biomechanics, which are both difficult to mimic. In this paper, two approaches are presented to achieve switchable adhesion. The first approach is based on a patterned polydimethylsiloxane (PDMS) polymer, where adhesion can be switched on and off by applying a low and a high compressive preload. The switch in adhesion is caused by a reversible mechanical instability of the adhesive silicone structures. The second approach is based on a composite material consisting of a Nickel- Titanium (NiTi) shape memory alloy and a patterned adhesive PDMS layer. The NiTi alloy is trained to change its surface topography as a function of temperature, which results in a change of the contact area and of alignment of the adhesive pattern towards a substrate, leading to switchable adhesion. These examples show that the unique properties of bio-inspired adhesives can be greatly improved by new concepts such as mechanical instability or by the use of active materials which react to external stimuli.

  10. Migration assessment and the 'threshold of toxicological concern' applied to the safe design of an acrylic adhesive for food-contact laminates.

    Science.gov (United States)

    Canellas, Elena; Vera, Paula; Nerín, Cristina

    2017-10-01

    The suitability of an acrylic adhesive used on food packaging was studied. Six potential migrants were identified using GC-MS and UPLC-QTOF. Five compounds were intentionally added (2-butoxyethanol and 2,4,7,9-tetramethyl-5-decyne-4,7-diol 10 (TMDD) and TMDD ethoxylates). One of the compounds identified as 2-(12-(methacryloyloxy) dodecyl)malonic acid was a non -intentionally added substance (NIAS), which could be a methyl metacrylate derivative. A migration study from multilayers containing paper-adhesive-film was carried out. The films used were polyethylene (PE), polypropylene, polyethylene terephthalate, polylactic acid (PLA) and Ecovio F2223®, which is a mixture of biodegradable polyester with PLA. All the non-volatile compounds, including the identified NIAS, migrated into the dry food simulant Tenax ®. Five surfactants based on TMDD were found to migrate from all laminates into Tenax at levels from 0.05 to 0.6 mg kg -1 . The results showed that the lowest migration (0.01 mg kg -1 for 2-(12-(methacryloyloxy)dodecyl)malonic acid to 0.07 for TMDD mg kg -1 ) occurred when the compounds passed through PLA, demonstrating its functional barrier properties to these compounds. In contrast, PE showed the worst barrier properties to these compounds. To evaluate the migration results, the threshold of toxicological concern strategy was applied. The migration values of the surfactant identified were above 0.09 mg kg -1 . Thus, it was decided to remove this surfactant from the formulation.

  11. Adhesion of Lunar Dust

    Science.gov (United States)

    Walton, Otis R.

    2007-01-01

    This paper reviews the physical characteristics of lunar dust and the effects of various fundamental forces acting on dust particles on surfaces in a lunar environment. There are transport forces and adhesion forces after contact. Mechanical forces (i.e., from rover wheels, astronaut boots and rocket engine blast) and static electric effects (from UV photo-ionization and/or tribo-electric charging) are likely to be the major contributors to the transport of dust particles. If fine regolith particles are deposited on a surface, then surface energy-related (e.g., van der Walls) adhesion forces and static-electric-image forces are likely to be the strongest contributors to adhesion. Some measurement techniques are offered to quantify the strength of adhesion forces. And finally some dust removal techniques are discussed.

  12. Photovoltaic module with adhesion promoter

    Science.gov (United States)

    Xavier, Grace

    2013-10-08

    Photovoltaic modules with adhesion promoters and methods for fabricating photovoltaic modules with adhesion promoters are described. A photovoltaic module includes a solar cell including a first surface and a second surface, the second surface including a plurality of interspaced back-side contacts. A first glass layer is coupled to the first surface by a first encapsulating layer. A second glass layer is coupled to the second surface by a second encapsulating layer. At least a portion of the second encapsulating layer is bonded directly to the plurality of interspaced back-side contacts by an adhesion promoter.

  13. Adhesive Categories

    DEFF Research Database (Denmark)

    Lack, Stephen; Sobocinski, Pawel

    2003-01-01

    We introduce adhesive categories, which are categories with structure ensuring that pushouts along monomorphisms are well-behaved. Many types of graphical structures used in computer science are shown to be examples of adhesive categories. Double-pushout graph rewriting generalises well...... to rewriting on arbitrary adhesive categories....

  14. Adhesive Categories

    DEFF Research Database (Denmark)

    Lack, Stephen; Sobocinski, Pawel

    2004-01-01

    We introduce adhesive categories, which are categories with structure ensuring that pushouts along monomorphisms are well-behaved. Many types of graphical structures used in computer science are shown to be examples of adhesive categories. Double-pushout graph rewriting generalises well...... to rewriting on arbitrary adhesive categories....

  15. Adhesion of liquid droplets to rough surfaces.

    Science.gov (United States)

    Li, Ri; Alizadeh, Azar; Shang, Wen

    2010-10-01

    We study the adhesion of liquid droplets to rough surfaces, focusing on how adhesion changes with surface chemistry and roughness. For hydrophobic surfaces (equilibrium contact angle θ(e)>90°), although increasing surface roughness augments apparent contact angle, it does not necessarily always reduce adhesion. In a domain defined by roughness and equilibrium contact angle, this study identifies regions where adhesion increases or decreases with increasing roughness. The two regions do not border at θ(e)=90°. It is found that making surfaces with low roughness ratio (close to 1) does not reduce adhesion unless the surface material is highly hydrophobic (θ(e)>120°). In other words, to reduce adhesion for existing hydrophobic materials (90°adhesion, the geometry of microstructures should be designed such that wetted fraction decreases with increasing roughness ratio. This study is of particular importance for the design of textured superhydrophobic surfaces.

  16. Initial Homotypic Cell Pair Adhesion in Regenerating Hydra Facilitates Subsequent Adhesion of Homotypic Cells

    Science.gov (United States)

    Takaku, Y.; Hariyama, T.; Tsukahara, Y.

    In Hydra vulgaris at the level of dissociated single cells endodermal cells adhere to each other more readily than to ectodermal cells at the initial adhesion. The time required for adhesion to occur between two adjacent cells is shorter for both endodermal and ectodermal homotypic cell adhesions once the initial adhesion of the first pair of cells has been established. It is confirmed that contact of an aggregated pair with additional homotypic cells facilitates the occurrence of homotypic adhesions; heterotypic adhesions are discouraged. This suggests that adhesion of homotypic cells contributes to an increased readiness for subsequent homotypic cells to adhere.

  17. Fibrillar Adhesive for Climbing Robots

    Science.gov (United States)

    Pamess, Aaron; White, Victor E.

    2013-01-01

    A climbing robot needs to use its adhesive patches over and over again as it scales a slope. Replacing the adhesive at each step is generally impractical. If the adhesive or attachment mechanism cannot be used repeatedly, then the robot must carry an extra load of this adhesive to apply a fresh layer with each move. Common failure modes include tearing, contamination by dirt, plastic deformation of fibers, and damage from loading/ unloading. A gecko-like fibrillar adhesive has been developed that has been shown useful for climbing robots, and may later prove useful for grasping, anchoring, and medical applications. The material consists of a hierarchical fibrillar structure that currently contains two levels, but may be extended to three or four levels in continuing work. The contacting level has tens of thousands of microscopic fibers made from a rubberlike material that bend over and create intimate contact with a surface to achieve maximum van der Waals forces. By maximizing the real area of contact that these fibers make and minimizing the bending energy necessary to achieve that contact, the net amount of adhesion has been improved dramatically.

  18. Optimizing Adhesive Design by Understanding Compliance.

    Science.gov (United States)

    King, Daniel R; Crosby, Alfred J

    2015-12-23

    Adhesives have long been designed around a trade-off between adhesive strength and releasability. Geckos are of interest because they are the largest organisms which are able to climb utilizing adhesive toepads, yet can controllably release from surfaces and perform this action over and over again. Attempting to replicate the hierarchical, nanoscopic features which cover their toepads has been the primary focus of the adhesives field until recently. A new approach based on a scaling relation which states that reversible adhesive force capacity scales with (A/C)(1/2), where A is the area of contact and C is the compliance of the adhesive, has enabled the creation of high strength, reversible adhesives without requiring high aspect ratio, fibrillar features. Here we introduce an equation to calculate the compliance of adhesives, and utilize this equation to predict the shear adhesive force capacity of the adhesive based on the material components and geometric properties. Using this equation, we have investigated important geometric parameters which control force capacity and have shown that by controlling adhesive shape, adhesive force capacity can be increased by over 50% without varying pad size. Furthermore, we have demonstrated that compliance of the adhesive far from the interface still influences shear adhesive force capacity. Utilizing this equation will allow for the production of adhesives which are optimized for specific applications in commercial and industrial settings.

  19. Adhesive particle shielding

    Science.gov (United States)

    Klebanoff, Leonard Elliott [Dublin, CA; Rader, Daniel John [Albuquerque, NM; Walton, Christopher [Berkeley, CA; Folta, James [Livermore, CA

    2009-01-06

    An efficient device for capturing fast moving particles has an adhesive particle shield that includes (i) a mounting panel and (ii) a film that is attached to the mounting panel wherein the outer surface of the film has an adhesive coating disposed thereon to capture particles contacting the outer surface. The shield can be employed to maintain a substantially particle free environment such as in photolithographic systems having critical surfaces, such as wafers, masks, and optics and in the tools used to make these components, that are sensitive to particle contamination. The shield can be portable to be positioned in hard-to-reach areas of a photolithography machine. The adhesive particle shield can incorporate cooling means to attract particles via the thermophoresis effect.

  20. Adhesion and wear resistance of materials

    Science.gov (United States)

    Buckley, D. H.

    1986-01-01

    Recent studies into the nature of bonding at the interface between two solids in contact or a solid and deposited film have provided a better understanding of those properties important to the adhesive wear resistance of materials. Analytical and experimental progress are reviewed. For simple metal systems the adhesive bond forces are related to electronic wave function overlap. With metals in contact with nonmetals, molecular-orbital energy, and density of states, respectively can provide insight into adhesion and wear. Experimental results are presented which correlate adhesive forces measured between solids and the electronic surface structures. Orientation, surface reconstruction, surface segregation, adsorption are all shown to influence adhesive interfacial strength. The interrelationship between adhesion and the wear of the various materials as well as the life of coatings applied to substrates are discussed. Metallic systems addressed include simple metals and alloys and these materials in contact with themselves, both oxide and nonoxide ceramics, diamond, polymers, and inorganic coating compounds, h as diamondlike carbon.

  1. Focal Adhesion Kinases in Adhesion Structures and Disease

    Directory of Open Access Journals (Sweden)

    Pierre P. Eleniste

    2012-01-01

    Full Text Available Cell adhesion to the extracellular matrix (ECM is essential for cell migration, proliferation, and embryonic development. Cells can contact the ECM through a wide range of matrix contact structures such as focal adhesions, podosomes, and invadopodia. Although they are different in structural design and basic function, they share common remodeling proteins such as integrins, talin, paxillin, and the tyrosine kinases FAK, Pyk2, and Src. In this paper, we compare and contrast the basic organization and role of focal adhesions, podosomes, and invadopodia in different cells. In addition, we discuss the role of the tyrosine kinases, FAK, Pyk2, and Src, which are critical for the function of the different adhesion structures. Finally, we discuss the essential role of these tyrosine kinases from the perspective of human diseases.

  2. Cellular Adhesion and Adhesion Molecules

    OpenAIRE

    SELLER, Zerrin

    2014-01-01

    In recent years, cell adhesion and cell adhesion molecules have been shown to be important for many normal biological processes, including embryonic cell migration, immune system functions and wound healing. It has also been shown that they contribute to the pathogenesis of a large number of common human disorders, such as rheumatoid arthritis and tumor cell metastasis in cancer. In this review, the basic mechanisms of cellular adhesion and the structural and functional features of adhes...

  3. Bacterial adhesion

    NARCIS (Netherlands)

    Loosdrecht, van M.C.M.

    1988-01-01

    As mentioned in the introduction of this thesis bacterial adhesion has been studied from a variety of (mostly practice oriented) starting points. This has resulted in a range of widely divergent approaches. In order to elucidate general principles in bacterial adhesion phenomena, we felt it

  4. Denture Adhesives

    Science.gov (United States)

    ... Devices Home Medical Devices Products and Medical Procedures Dental Devices Denture Adhesives Share Tweet Linkedin Pin it More sharing options ... Manufacturers (February 23, 2011) (PDF - 22KB) More in Dental Devices Denture Adhesives Multiple-Use Dental Dispenser Devices Dental Amalgam About ...

  5. Biological adhesives and fastening devices

    Science.gov (United States)

    Wolpert, H. D.

    2012-04-01

    Sea creatures are a leading source to some of the more interesting discoveries in adhesives. Because sea water naturally breaks down even the strongest conventional adhesive, an alternative is important that could be used in repairing or fabricating anything that might have regular contact with moisture such as: Repairing broken and shattered bones, developing a surgical adhesive, use in the dental work, repairing and building ships, and manufacturing plywood. Some of nature's prototypes include the common mussel, limpet, some bacteria and abalone. As we learn more about these adhesives we are also developing non adhesive fasteners, such as mimicked after studying the octopus, burdock burrs (i.e. Velcro®) and the gecko.

  6. Adhesive Behavior of Single Carbon Nanotubes

    Science.gov (United States)

    Maeno, Yohei; Ishikawa, Atsunori; Nakayama, Yoshikazu

    2010-06-01

    We examined the adhesion of a carbon nanotube (CNT) tip using a manipulation technique with a transmission electron microscope. In addition, we estimated the maximum normal adhesion possibility of a CNT-based gecko tape. The adhesive behavior of a single isolated CNT to Au solid surfaces has high normal strength (6.84 nN), which has a linear relation to the cross section of a CNT, indicating the mechanism: van der Waals force was inferred from the contact of two flat surfaces. Adhesion measurements conducted on several surface materials verify that the surface chemistry affects adhesive properties of CNT tips.

  7. Adhesion dynamics for cellulose nanocomposites.

    Science.gov (United States)

    Nordgren, Niklas; Lönnberg, Hanna; Hult, Anders; Malmström, Eva; Rutland, Mark W

    2009-10-01

    The efficiency of poly(ε-caprolactone) (PCL) as a matrix polymer for cellulose nanocomposites has been investigated at the macromolecular contact level using atomic force microscopy in a colloidal probe configuration. Model cellulose microspheres grafted with PCL were prepared via ring-opening polymerization. Force measurements between the functionalized particles revealed the adhesion to be highly dependent on the contact time because of a diffusion-controlled mechanism. Moreover, an increase of the temperature to 60 degrees C (close to T(m) for the PCL graft) greatly enhanced the adhesion at the polymer-polymer interface, demonstrating the importance of entanglements in the annealing of composite materials.

  8. DEVELOPMENT OF STRUCTURAL ADHESIVES,

    Science.gov (United States)

    Contents: (A) Structural adhesives for metals; development of better adhesives; development of heat resistance adhesives; development of room...temperature setting adhesives; recent investigations of metal-bonding adhesives; development of production processes and design criteria for metal adhesives... development of non-destructive inspection methods for adhesive bonded structures. (B) European papers; British developments in the field of

  9. Adhesion mechanism of a gecko-inspired oblique structure with an adhesive tip for asymmetric detachment

    Science.gov (United States)

    Sekiguchi, Yu; Takahashi, Kunio; Sato, Chiaki

    2015-12-01

    An adhesion model of an oblique structure with an adhesive tip is proposed by considering a limiting stress for adhesion to describe the detachment mechanism of gecko foot hairs. When a force is applied to the root of the oblique structure, normal and shear stresses are generated at contact and the adhesive tip is detached from the surface when reaching the limiting stress. An adhesion criterion that considers both the normal and shear stresses is introduced, and the asymmetric detachment of the oblique structure is theoretically investigated. In addition, oblique beam array structures are manufactured, and an inclination effect of the structure on the asymmetric detachment is experimentally verified.

  10. Allergic Stomatitis From Orthodontic Adhesives.

    Science.gov (United States)

    Peterson, Mark R; Wong, Priscilla H; Dickson, Scott D; Coop, Christopher A

    2017-03-01

    We report a case of a type IV hypersensitivity reaction causing oral stomatitis, presumed to be the result of common dental adhesives. The case was diagnosed using patch testing to the dental adhesives that were used in the patient. Both of the adhesives tested contained a form of acrylate that is being seen more frequently in the literature as a cause of type IV hypersensitivity reactions. Metals can cause allergic reactions; however, other contact items need to be considered as a cause of oral allergic reactions. Cases of allergic stomatitis are rising and there is question if all-in-one adhesives may be contributing to this rise. Reprint & Copyright © 2017 Association of Military Surgeons of the U.S.

  11. Soluble adhesion molecules in human cancers: sources and fates.

    NARCIS (Netherlands)

    Kilsdonk, J.W.J. van; Kempen, L.C.L.T. van; Muijen, G.N.P. van; Ruiter, D.J.; Swart, G.W.

    2010-01-01

    Adhesion molecules endow tumor cells with the necessary cell-cell contacts and cell-matrix interactions. As such, adhesion molecules are involved in cell signalling, proliferation and tumor growth. Rearrangements in the adhesion repertoire allow tumor cells to migrate, invade and form metastases.

  12. Bacterial Adhesion & Blocking Bacterial Adhesion

    DEFF Research Database (Denmark)

    Vejborg, Rebecca Munk

    2008-01-01

    components. These substances may both mediate and stabilize the bacterial biofilm. Finally, several adhesive structures were examined, and a novel physiological biofilm phenotype in E.coli biofilms was characterized, namely cell chain formation. The autotransporter protein, antigen 43, was implicated...

  13. Focal Adhesion Induction at the Tip of a Functionalized Nanoelectrode

    OpenAIRE

    Fuentes, Daniela E.; Bae, Chilman; Butler, Peter J.

    2011-01-01

    Cells dynamically interact with their physical micro-environment through the assembly of nascent focal contacts and focal adhesions. The dynamics and mechanics of these contact points are controlled by transmembrane integrins and an array of intracellular adaptor proteins. In order to study the mechanics and dynamics of focal adhesion assembly, we have developed a technique for the timed induction of a nascent focal adhesion. Bovine aortic endothelial cells were approached at the apical surfa...

  14. Adhesive plasters

    Science.gov (United States)

    Holcombe, Jr., Cressie E.; Swain, Ronald L.; Banker, John G.; Edwards, Charlene C.

    1978-01-01

    Adhesive plaster compositions are provided by treating particles of Y.sub.2 O.sub.3, Eu.sub.2 O.sub.3, Gd.sub.2 O.sub.3 or Nd.sub.2 O.sub.3 with dilute acid solutions. The resulting compositions have been found to spontaneously harden into rigid reticulated masses resembling plaster of Paris. Upon heating, the hardened material is decomposed into the oxide, yet retains the reticulated rigid structure.

  15. Adhesion-induced receptor segregation and adhesion plaque formation: A model membrane study.

    Science.gov (United States)

    Kloboucek, A; Behrisch, A; Faix, J; Sackmann, E

    1999-10-01

    A model system to study the control of cell adhesion by receptor-mediated specific forces, universal interactions, and membrane elasticity is established. The plasma membrane is mimicked by reconstitution of homophilic receptor proteins into solid supported membranes and, together with lipopolymers, into giant vesicles with the polymers forming an artificial glycocalix. The homophilic cell adhesion molecule contact site A, a lipid-anchored glycoprotein from cells of the slime mold Dictyostelium discoideum, is used as receptor. The success of the reconstitution, the structure and the dynamics of the model membranes are studied by various techniques including film balance techniques, micro fluorescence, fluorescence recovery after photobleaching, electron microscopy, and phase contrast microscopy. The interaction of the functionalized giant vesicles with the supported bilayer is studied by reflection interference contrast microscopy, and the adhesion strength is evaluated quantitatively by a recently developed technique. At low receptor concentrations adhesion-induced receptor segregation in the membranes leads to decomposition of the contact zone between membranes into domains of strong (receptor-mediated) adhesion and regions of weak adhesion while continuous zones of strong adhesion form at high receptor densities. The adhesion strengths (measured in terms of the spreading pressure S) of the various states of adhesion are obtained locally by analysis of the vesicle contour near the contact line in terms of elastic boundary conditions of adhesion: the balance of tensions and moments. The spreading pressure of the weak adhesion zones is S approximately 10(-9) J/m(2) and is determined by the interplay of gravitation and undulation forces whereas the spreading pressure of the tight adhesion domains is of the order S approximately 10(-6) J/m(2).

  16. Adhesion and Cohesion

    Directory of Open Access Journals (Sweden)

    J. Anthony von Fraunhofer

    2012-01-01

    Full Text Available The phenomena of adhesion and cohesion are reviewed and discussed with particular reference to dentistry. This review considers the forces involved in cohesion and adhesion together with the mechanisms of adhesion and the underlying molecular processes involved in bonding of dissimilar materials. The forces involved in surface tension, surface wetting, chemical adhesion, dispersive adhesion, diffusive adhesion, and mechanical adhesion are reviewed in detail and examples relevant to adhesive dentistry and bonding are given. Substrate surface chemistry and its influence on adhesion, together with the properties of adhesive materials, are evaluated. The underlying mechanisms involved in adhesion failure are covered. The relevance of the adhesion zone and its importance with regard to adhesive dentistry and bonding to enamel and dentin is discussed.

  17. Adhesion of coagulase-negative staphylococci to methacrylate polymers and copolymers

    NARCIS (Netherlands)

    Hogt, A.H.; Dankert, J.; Feijen, Jan

    1986-01-01

    Adhesion of coagulasef-negative staphylococci (CNS) was studied onto a homologous series of methacrylate polymers and copolymers. The materials varied in wettability (contact angles) and were either positively or negatively charged (zetapotential). Bacterial adhesion experiments performed in a

  18. Force analysis of bacterial transmission from contact lens cases to corneas, with the contact lens as the intermediary

    NARCIS (Netherlands)

    Qu, Wen-wen; Hooymans, Johanna MM; de Vries, Jacob; van der Mei, Henderina; Busscher, Hendrik

    PURPOSE. To determine the probability of transmission of a Staphylococcus aureus strain from a contact lens case, to the contact lens (CL) surfaces, to the cornea, on the basis of bacterial adhesion forces measured by using atomic force microscopy (AFM). METHODS. Adhesion forces between S. aureus

  19. Design and fabrication of polymer based dry adhesives inspired by the gecko adhesive system

    Science.gov (United States)

    Jin, Kejia

    There has been significant interest in developing dry adhesives mimicking the gecko adhesive system, which offers several advantages compared to conventional pressure sensitive adhesives. Specifically, gecko adhesive pads have anisotropic adhesion properties: the adhesive pads (spatulae) stick strongly when sheared in one direction but are non-adherent when sheared in the opposite direction. This anisotropy property is attributed to the complex topography of the array of fine tilted and curved columnar structures (setae) that bear the spatulae. In this thesis, easy, scalable methods, relying on conventional and unconventional techniques are presented to incorporate tilt in the fabrication of synthetic polymer-based dry adhesives mimicking the gecko adhesive system, which provide anisotropic adhesion properties. In the first part of the study, the anisotropic adhesion and friction properties of samples with various tilt angles to test the validity of a nanoscale tape-peeling model of spatular function are measured. Consistent with the Peel Zone model, samples with lower tilt angles yielded larger adhesion forces. Contact mechanics of the synthetic array were highly anisotropic, consistent with the frictional adhesion model and gecko-like. Based on the original design, a new design of gecko-like dry adhesives was developed which showed superior tribological properties and furthermore showed anisotropic adhesive properties without the need for tilt in the structures. These adhesives can be used to reversibly suspend weights from vertical surfaces (e.g., walls) and, for the first time to our knowledge, horizontal surfaces (e.g., ceilings) by simultaneously and judiciously activating anisotropic friction and adhesion forces. Furthermore, adhesion properties between artificial gecko-inspired dry adhesives and rough substrates with varying roughness are studied. The results suggest that both adhesion and friction forces on a rough substrate depends significantly on the

  20. Adhesion testing device

    Science.gov (United States)

    LaPeyronnie, Glenn M. (Inventor); Huff, Charles M. (Inventor)

    2010-01-01

    The present invention provides a testing apparatus and method for testing the adhesion of a coating to a surface. The invention also includes an improved testing button or dolly for use with the testing apparatus and a self aligning button hook or dolly interface on the testing apparatus. According to preferred forms, the apparatus and method of the present invention are simple, portable, battery operated rugged, and inexpensive to manufacture and use, are readily adaptable to a wide variety of uses, and provide effective and accurate testing results. The device includes a linear actuator driven by an electric motor coupled to the actuator through a gearbox and a rotatable shaft. The electronics for the device are contained in the head section of the device. At the contact end of the device, is positioned a self aligning button hook, attached below the load cell located on the actuator shaft.

  1. Direct observation of microcavitation in underwater adhesion of mushroom-shaped adhesive microstructure.

    Science.gov (United States)

    Heepe, Lars; Kovalev, Alexander E; Gorb, Stanislav N

    2014-01-01

    In this work we report on experiments aimed at testing the cavitation hypothesis [Varenberg, M.; Gorb, S. J. R. Soc., Interface 2008, 5, 383-385] proposed to explain the strong underwater adhesion of mushroom-shaped adhesive microstructures (MSAMSs). For this purpose, we measured the pull-off forces of individual MSAMSs by detaching them from a glass substrate under different wetting conditions and simultaneously video recording the detachment behavior at very high temporal resolution (54,000-100,000 fps). Although microcavitation was observed during the detachment of individual MSAMSs, which was a consequence of water inclusions present at the glass-MSAMS contact interface subjected to negative pressure (tension), the pull-off forces were consistently lower, around 50%, of those measured under ambient conditions. This result supports the assumption that the recently observed strong underwater adhesion of MSAMS is due to an air layer between individual MSAMSs [Kizilkan, E.; Heepe, L.; Gorb, S. N. Underwater adhesion of mushroom-shaped adhesive microstructure: An air-entrapment effect. In Biological and biomimetic adhesives: Challenges and opportunities; Santos, R.; Aldred, N.; Gorb, S. N.; Flammang, P., Eds.; The Royal Society of Chemistry: Cambridge, U.K., 2013; pp 65-71] rather than by cavitation. These results obtained due to the high-speed visualisation of the contact behavior at nanoscale-confined interfaces allow for a microscopic understanding of the underwater adhesion of MSAMSs and may aid in further development of artificial adhesive microstructures for applications in predominantly liquid environments.

  2. Adhesion in microelectronics

    CERN Document Server

    Mittal, K L

    2014-01-01

    This comprehensive book will provide both fundamental and applied aspects of adhesion pertaining to microelectronics in a single and easily accessible source. Among the topics to be covered include; Various theories or mechanisms of adhesionSurface (physical or chemical) characterization of materials as it pertains to adhesionSurface cleaning as it pertains to adhesionWays to improve adhesionUnraveling of interfacial interactions using an array of pertinent techniquesCharacterization of interfaces / interphasesPolymer-polymer adhesionMetal-polymer adhesion  (metallized polymers)Polymer adhesi

  3. Enzymatically degradable mussel-inspired adhesive hydrogel.

    Science.gov (United States)

    Brubaker, Carrie E; Messersmith, Phillip B

    2011-12-12

    Mussel-inspired adhesive hydrogels represent innovative candidate medical sealants or glues. In the present work, we describe an enzyme-degradable mussel-inspired adhesive hydrogel formulation, achieved by incorporating minimal elastase substrate peptide Ala-Ala into the branched poly(ethylene glycol) (PEG) macromonomer structure. The system takes advantage of neutrophil elastase expression upregulation and secretion from neutrophils upon recruitment to wounded or inflamed tissue. By integrating adhesive degradation behaviors that respond to cellular cues, we expand the functional range of our mussel-inspired adhesive hydrogel platforms. Rapid (adhesion of the proteolytically active, catechol-terminated precursor macromonomer was achieved by addition of sodium periodate oxidant. Rheological analysis and equilibrium swelling studies demonstrated that the hydrogel is appropriate for soft tissue-contacting applications. Notably, hydrogel storage modulus (G') achieved values on the order of 10 kPa, and strain at failure exceeded 200% strain. Lap shear testing confirmed the material's adhesive behavior (shear strength: 30.4 ± 3.39 kPa). Although adhesive hydrogel degradation was not observed during short-term (27 h) in vitro treatment with neutrophil elastase, in vivo degradation proceeded over several months following dorsal subcutaneous implantation in mice. This work represents the first example of an enzymatically degradable mussel-inspired adhesive and expands the potential biomedical applications of this family of materials.

  4. Electrostatic adhesion testing of electronic metallizations

    Science.gov (United States)

    Yang, H. S.; Brotzen, F. R.; Callahan, D. L.; Dunn, C. F.

    1997-06-01

    A novel technique is developed to measure quantitatively the adhesion strength of metallizations deposited on substrates such as silicon. Electrostatic adhesion testing employs electrostatic forces to generate delaminating stresses in thin metallic films. The interfacial adhesion strength is readily calculated from the electrode geometry and the applied electrostatic field at failure. Unlike other adhesion tests, this technique does not require any mechanical contact and is virtually independent of the plastic deformation of the film. Furthermore, this test provides direct strength measurements as opposed to work or energy of adhesion measurements obtained by the common peel test. The adhesion strengths of several metallizations (Cu, Al) are characterized using the electrostatic technique. The distribution of stress-at-failure data follows Weibull failure statistics. Field emission scanning electron microscopy reveals that the films are delaminated in a microblister-type mode. It is shown that electrostatic adhesion testing is effective in providing quantitative values for the adhesion strengths and failure probabilities of thin-film metallizations.

  5. Role of seta angle and flexibility in the gecko adhesion mechanism

    Science.gov (United States)

    Hu, Congcong; Alex Greaney, P.

    2014-08-01

    A model is developed to describe the reversible nature of gecko dry adhesion. The central aspect of this model is that the seta can be easily peeled away from the contacting surface by a small moment at the contact tip. It is shown that this contact condition is very sensitive, but can result in robust adhesion if individual setae are canted and highly flexible. In analogy to the "cone of friction," we consider the "adhesion region"—the domain of normal and tangential forces that maintain adhesion. Results demonstrate that this adhesion region is highly asymmetric enabling the gecko to adhere under a variety of loading conditions associated with scuttling horizontally, vertically, and inverted. Moreover, under each of these conditions, there is a low energy path to de-adhesion. In this model, obliquely canted seta (as possessed by geckos) rather than vertically aligned fibers (common in synthetic dry adhesive) provides the most robust adhesion.

  6. Thin film adhesion by nanoindentation-induced superlayers. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Gerberich, William W.; Volinsky, A.A.

    2001-06-01

    This work has analyzed the key variables of indentation tip radius, contact radius, delamination radius, residual stress and superlayer/film/interlayer properties on nanoindentation measurements of adhesion. The goal to connect practical works of adhesion for very thin films to true works of adhesion has been achieved. A review of this work titled ''Interfacial toughness measurements of thin metal films,'' which has been submitted to Acta Materialia, is included.

  7. Understanding Marine Mussel Adhesion

    Energy Technology Data Exchange (ETDEWEB)

    H. G. Silverman; F. F. Roberto

    2007-12-01

    In addition to identifying the proteins that have a role in underwater adhesion by marine mussels, research efforts have focused on identifying the genes responsible for the adhesive proteins, environmental factors that may influence protein production, and strategies for producing natural adhesives similar to the native mussel adhesive proteins. The production-scale availability of recombinant mussel adhesive proteins will enable researchers to formulate adhesives that are waterimpervious and ecologically safe and can bind materials ranging from glass, plastics, metals, and wood to materials, such as bone or teeth, biological organisms, and other chemicals or molecules. Unfortunately, as of yet scientists have been unable to duplicate the processes that marine mussels use to create adhesive structures. This study provides a background on adhesive proteins identified in the blue mussel, Mytilus edulis, and introduces our research interests and discusses the future for continued research related to mussel adhesion.

  8. Orientation angle and the adhesion of single gecko setae.

    Science.gov (United States)

    Hill, Ginel C; Soto, Daniel R; Peattie, Anne M; Full, Robert J; Kenny, T W

    2011-07-06

    We investigated the effects of orientation angle on the adhesion of single gecko setae using dual-axis microelectromechanical systems force sensors to simultaneously detect normal and shear force components. Adhesion was highly sensitive to the pitch angle between the substrate and the seta's stalk. Maximum lateral adhesive force was observed with the stalk parallel to the substrate, and adhesion decreased smoothly with increasing pitch. The roll orientation angle only needed to be roughly correct with the spatular tuft of the seta oriented grossly towards the substrate for high adhesion. Also, detailed measurements were made to control for the effect of normal preload forces. Higher normal preload forces caused modest enhancement of the observed lateral adhesive force, provided that adequate contact was made between the seta and the substrate. These results should be useful in the design and manufacture of gecko-inspired synthetic adhesives with anisotropic properties, an area of substantial recent research efforts.

  9. Orientation angle and the adhesion of single gecko setae

    Science.gov (United States)

    Hill, Ginel C.; Soto, Daniel R.; Peattie, Anne M.; Full, Robert J.; Kenny, T. W.

    2011-01-01

    We investigated the effects of orientation angle on the adhesion of single gecko setae using dual-axis microelectromechanical systems force sensors to simultaneously detect normal and shear force components. Adhesion was highly sensitive to the pitch angle between the substrate and the seta's stalk. Maximum lateral adhesive force was observed with the stalk parallel to the substrate, and adhesion decreased smoothly with increasing pitch. The roll orientation angle only needed to be roughly correct with the spatular tuft of the seta oriented grossly towards the substrate for high adhesion. Also, detailed measurements were made to control for the effect of normal preload forces. Higher normal preload forces caused modest enhancement of the observed lateral adhesive force, provided that adequate contact was made between the seta and the substrate. These results should be useful in the design and manufacture of gecko-inspired synthetic adhesives with anisotropic properties, an area of substantial recent research efforts. PMID:21288955

  10. Biologically Inspired Mushroom-Shaped Adhesive Microstructures

    Science.gov (United States)

    Heepe, Lars; Gorb, Stanislav N.

    2014-07-01

    Adhesion is a fundamental phenomenon with great importance in technology, in our everyday life, and in nature. In this article, we review physical interactions that resist the separation of two solids in contact. By using examples of biological attachment systems, we summarize and categorize various principles that contribute to the so-called gecko effect. Emphasis is placed on the contact geometry and in particular on the mushroom-shaped geometry, which is observed in long-term biological adhesive systems. Furthermore, we report on artificial model systems with this bio-inspired geometry and demonstrate that surface microstructures with this geometry are promising candidates for technical applications, in which repeatable, reversible, and residue-free adhesion under different environmental conditions—such as air, fluid, and vacuum—is required. Various applications in robotic systems and in industrial pick-and-place processes are discussed.

  11. The cytoplasmic face of cell contact sites.

    Science.gov (United States)

    Pokutta, Sabine; Weis, William I

    2002-04-01

    The cytoplasmic face of cell contact sites comprises large macromolecular assemblies that link transmembrane cell adhesion molecules to the cytoskeleton. These assemblies are dynamic structures that are the targets of regulatory signals that control cell adhesiveness. Recent studies of the biochemistry and structure of the cadherin-catenin complex, vinculin and proteins of the ezrin/radixin/moesin family have begun to reveal the architecture of these assemblies and the mechanisms that are involved in their regulation.

  12. Synthesis of LTA zeolite for bacterial adhesion

    Energy Technology Data Exchange (ETDEWEB)

    Belaabed, R.; Eabed, S.; Addaou, A.; Laajab, A.; Rodriguez, M.A.; Lahsini, A.

    2016-07-01

    High affinity and adhesion capacity for Gram-positive bacteria on minerals has been widely studied. In this work the adhesion of bacteria on synthesized zeolite has been studied. The Zeolite Linde Type A (LTA) has been synthesized using hydrothermal route using processing parameters to obtain low cost materials. For adhesion studies Staphylococcus aureus and Bacillus subtilis were used as Gram-positive bacteria, Escherichia coli and Pseudomonas aeruginosa are used as Gram-negative bacteria. X-ray diffraction, environmental scanning electron microscope and attenuated total reflection-Fourier transform infrared spectroscopy were used to characterize the synthesized zeolite. To evaluate the bacterial adhesion to zeolite LTA the hydrophobicity and surface properties are examined using contact angle measurement. (Author)

  13. Adhesion of hydrogels under water by hydrogen bonding: from molecular interactions to macroscopic adhesion

    Science.gov (United States)

    Creton, Costantino

    2012-02-01

    Hydrogels are an essential part of living organisms and are widely used in biotechnologies, health care and food science. Although swelling properties, cell adhesion on gel surfaces and gel elasticity have attracted much interest, macroscopic adhesion of hydrogels on solid surfaces in aqueous environment is much less well understood. We studied systematically and in aqueous environment, the reversible adhesion by hydrogen bonding of macroscopic model hydrogels of polydimethylacrylamide (PDMA) or of polyacrylamide (PAAm) on solid surfaces functionalized with polyacrylic acid (PAA) polymer brushes. The hydrogels were synthesized by free radical polymerization and the brushes were prepared by grafting polytertbutyl acrylate chains and converting them by pyrolisis into polyacrylic acid. A new adhesion tester based on the flat punch geometry was designed and used to control the contact area, contact time, contact pressure and debonding velocity of the gels from the surface while the samples were fully immersed in water. The adhesion tests were performed at different pH and temperatures and the modulus of the gel and grafting density and molecular weight of the brushes was varied. Macroscopic adhesion results were compared with phase diagrams in dilute solution to detect molecular interactions. While the PDMA/PAA pair behaved very similarly in solution and in macroscopic adhesion tests, the PAAm/PAA pair showed an unexpectedly high adhesion level relatively to its complexation ability in dilute solution. Surprisingly, time dependent experiments showed that the kinetics of H-bond formation and breakup at interfaces was very slow resulting in adhesion energies which were very dependent on contact time up to one hour of contact. At the molecular level, neutron reflectivity showed that the equilibrium brush conformation when in contact with the gels was more extended at pH2 (H-bonds activated) than at pH9 (H-bonds deactivated) and that a certain applied pressure was

  14. Chapter 9:Wood Adhesion and Adhesives

    Science.gov (United States)

    Charles R. Frihart

    2013-01-01

    The recorded history of bonding wood dates back at least 3000 years to the Egyptians (Skeist and Miron 1990, River 1994a), and adhesive bonding goes back to early mankind (Keimel 2003). Although wood and paper bonding are the largest applications for adhesives, some of the fundamental aspects leading to good bonds are not fully understood. Better understanding of these...

  15. Geckolike high shear strength by carbon nanotube fiber adhesives

    Science.gov (United States)

    Maeno, Y.; Nakayama, Y.

    2009-01-01

    Carbon nanotube adhesives can adhere strongly to surfaces as a gecko does. The number of carbon nanotube layers is an important determinant of the contact area for adhesion. Balancing the catalyst ratio and buffer layer used for chemical vapor deposition processing controls the number of carbon nanotube layers and their distribution. The features of carbon nanotubes determine the shear strength of adhesion. Carbon nanotubes with a broad distribution of layers exhibit enhanced shear strength with equivalent adhesive capability to that of a natural Tokay Gecko (Gekko gecko)

  16. PH dependent adhesive peptides

    Science.gov (United States)

    Tomich, John; Iwamoto, Takeo; Shen, Xinchun; Sun, Xiuzhi Susan

    2010-06-29

    A novel peptide adhesive motif is described that requires no receptor or cross-links to achieve maximal adhesive strength. Several peptides with different degrees of adhesive strength have been designed and synthesized using solid phase chemistries. All peptides contain a common hydrophobic core sequence flanked by positively or negatively charged amino acids sequences.

  17. The role of van der Waals forces in adhesion of micromachined surfaces.

    Science.gov (United States)

    Delrio, Frank W; de Boer, Maarten P; Knapp, James A; David Reedy, E; Clews, Peggy J; Dunn, Martin L

    2005-08-01

    Interfacial adhesion and friction are important factors in determining the performance and reliability of microelectromechanical systems. We demonstrate that the adhesion of micromachined surfaces is in a regime not considered by standard rough surface adhesion models. At small roughness values, our experiments and models show unambiguously that the adhesion is mainly due to van der Waals dispersion forces acting across extensive non-contacting areas and that it is related to 1/Dave2, where Dave is the average surface separation. These contributions must be considered because of the close proximity of the surfaces, which is a result of the planar deposition technology. At large roughness values, van der Waals forces at contacting asperities become the dominating contributor to the adhesion. In this regime our model calculations converge with standard models in which the real contact area determines the adhesion. We further suggest that topographic correlations between the upper and lower surfaces must be considered to understand adhesion completely.

  18. Acrylates in contact dermatitis.

    Science.gov (United States)

    Sasseville, Denis

    2012-01-01

    Acrylates are plastic materials that are formed by the polymerization of monomers derived from acrylic or methacrylic acid. They have found numerous applications in paints, varnishes and adhesives, in the printing industry, in the medical and dental professions, and in artificial nails. Beginning in the 1950s, many reports of occupational and nonoccupational allergic contact dermatitis to (meth)acrylate monomers have been published. These molecules are strong irritants, and patch testing can induce active sensitization. When patch tested, acrylate-allergic patients often display multiple positive tests. These reactions may represent cross-reactions, or concomitant reactions due to the presence, in the products responsible for sensitization, of impurities not disclosed in material safety data sheets. (Meth)acrylates are volatile and unstable chemicals, as demonstrated by their rapid disappearance from commercially available patch test allergens when exposed to air for more than a few hours.

  19. Particle adhesion and removal

    CERN Document Server

    Mittal, K L

    2015-01-01

    The book provides a comprehensive and easily accessible reference source covering all important aspects of particle adhesion and removal.  The core objective is to cover both fundamental and applied aspects of particle adhesion and removal with emphasis on recent developments.  Among the topics to be covered include: 1. Fundamentals of surface forces in particle adhesion and removal.2. Mechanisms of particle adhesion and removal.3. Experimental methods (e.g. AFM, SFA,SFM,IFM, etc.) to understand  particle-particle and particle-substrate interactions.4. Mechanics of adhesion of micro- and  n

  20. A mechanical model of biomimetic adhesive pads with tilted and hierarchical structures

    Energy Technology Data Exchange (ETDEWEB)

    Schargott, M [Institute of Mechanics, Technische Universitaet Berlin, Strd 17 Juni 135, 10623 Berlin (Germany)], E-mail: martin.schargott@tu-berlin.de

    2009-06-01

    A 3D model for hierarchical biomimetic adhesive pads is constructed. It is based on the main principles of the adhesive pads of the Tokay gecko and consists of hierarchical layers of vertical or tilted beams, where each layer is constructed in such a way that no cohesion between adjacent beams can occur. The elastic and adhesive properties are calculated analytically and numerically. For the adhesive contact on stochastically rough surfaces, the maximum adhesion force increases with increasing number of hierarchical layers. Additional calculations show that the adhesion force also depends on the height spectrum of the rough surface.

  1. Stress Analysis of Adhesive Lap Joint of Hollow Shafts Subjected to Torsional Moments

    OpenAIRE

    仲野, 雄一; 高城, 有希久

    2001-01-01

    The stress and strain distributions in adhesively bonded lap joints of dissimilar hollow shafts are examined using the axisymmetric theory of elasticity. In the analysis, the joint is modeled as an elastic three-body contact problem where the hollow shafts and the adhesive are replaced by finite hollow cylinders. The effects of the ratio of Young's modulus of the adhesive to that of the shaft, the overlap length and the thickness of the adhesive on the stress distributions at the interfaces i...

  2. Characterization of neutrophil adhesion to different titanium surfaces

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 37; Issue 1. Characterization of neutrophil adhesion to different titanium surfaces ... The aim of the present study is to compare the behaviours of neutrophils in direct contact with different Ti surfaces. Isolated human neutrophils were placed into contact with Ti discs, ...

  3. Yielding elastic tethers stabilize robust cell adhesion.

    Directory of Open Access Journals (Sweden)

    Matt J Whitfield

    2014-12-01

    Full Text Available Many bacteria and eukaryotic cells express adhesive proteins at the end of tethers that elongate reversibly at constant or near constant force, which we refer to as yielding elasticity. Here we address the function of yielding elastic adhesive tethers with Escherichia coli bacteria as a model for cell adhesion, using a combination of experiments and simulations. The adhesive bond kinetics and tether elasticity was modeled in the simulations with realistic biophysical models that were fit to new and previously published single molecule force spectroscopy data. The simulations were validated by comparison to experiments measuring the adhesive behavior of E. coli in flowing fluid. Analysis of the simulations demonstrated that yielding elasticity is required for the bacteria to remain bound in high and variable flow conditions, because it allows the force to be distributed evenly between multiple bonds. In contrast, strain-hardening and linear elastic tethers concentrate force on the most vulnerable bonds, which leads to failure of the entire adhesive contact. Load distribution is especially important to noncovalent receptor-ligand bonds, because they become exponentially shorter lived at higher force above a critical force, even if they form catch bonds. The advantage of yielding is likely to extend to any blood cells or pathogens adhering in flow, or to any situation where bonds are stretched unequally due to surface roughness, unequal native bond lengths, or conditions that act to unzip the bonds.

  4. Yielding Elastic Tethers Stabilize Robust Cell Adhesion

    Science.gov (United States)

    Whitfield, Matt J.; Luo, Jonathon P.; Thomas, Wendy E.

    2014-01-01

    Many bacteria and eukaryotic cells express adhesive proteins at the end of tethers that elongate reversibly at constant or near constant force, which we refer to as yielding elasticity. Here we address the function of yielding elastic adhesive tethers with Escherichia coli bacteria as a model for cell adhesion, using a combination of experiments and simulations. The adhesive bond kinetics and tether elasticity was modeled in the simulations with realistic biophysical models that were fit to new and previously published single molecule force spectroscopy data. The simulations were validated by comparison to experiments measuring the adhesive behavior of E. coli in flowing fluid. Analysis of the simulations demonstrated that yielding elasticity is required for the bacteria to remain bound in high and variable flow conditions, because it allows the force to be distributed evenly between multiple bonds. In contrast, strain-hardening and linear elastic tethers concentrate force on the most vulnerable bonds, which leads to failure of the entire adhesive contact. Load distribution is especially important to noncovalent receptor-ligand bonds, because they become exponentially shorter lived at higher force above a critical force, even if they form catch bonds. The advantage of yielding is likely to extend to any blood cells or pathogens adhering in flow, or to any situation where bonds are stretched unequally due to surface roughness, unequal native bond lengths, or conditions that act to unzip the bonds. PMID:25473833

  5. Wet adhesion with application to tree frog adhesive toe pads and tires

    Energy Technology Data Exchange (ETDEWEB)

    Persson, B N J [IFF, FZ-Juelich, 52425 Juelich (Germany)

    2007-09-19

    Strong adhesion between solids with rough surfaces is only possible if at least one of the solids is elastically very soft. Some lizards and spiders are able to adhere (dry adhesion) and move on very rough vertical surfaces due to very compliant surface layers on their attachment pads. Flies, bugs, grasshoppers and tree frogs have less compliant pad surface layers, and in these cases adhesion to rough surfaces is only possible because the animals inject a wetting liquid into the pad-substrate contact area, which generates a relative long-range attractive interaction due to the formation of capillary bridges. In this presentation I will discuss some aspects of wet adhesion for tree frogs and give some comments related to tire applications.

  6. Assessment of surface contamination with contact mechanics

    Energy Technology Data Exchange (ETDEWEB)

    EMERSON,JOHN A.; MILLER,GREGORY V.; SORENSEN,CHRISTOPHER R.; PEARSON,RAYMOND A.

    2000-02-21

    The authors are particularly interested in the work of adhesion measurements as a means to facilitate the understanding of the adhesive failure mechanisms for systems containing encapsulated and bonded components. Of the several issues under investigation, one is the effect of organic contamination on the adhesive strength for several types of polymer/metal interface combinations. The specific question that the authors are trying to address is at what level of contamination does adhesive strength decrease. The use of contact mechanics, the JKR method, is a good approach for studying this question. Another approach being studied is the use of interracial fracture mechanics. The model contaminant is hexadecane--non-polar, medium molecular weight hydrocarbon fluid. They choose hexadecane because it replicates typical machining fluids, is nonreactive with Al surfaces, and should not dissolve readily into the adhesive systems of interest. The application of a uniform, controllable and reproducible hexadecane layer on Al surfaces has proven to be difficult. A primary concern is whether studies of model systems can be extended to systems of technological interest. The JKR theory is a continuum mechanics model of contact between two solid spheres that was developed by Johnson, Kendall and Roberts. The JKR theory is an extension of Hertzian contact theory and attributes the additional increase in the contact area between a soft elastomeric hemisphere to adhesive forces between the two surfaces. The JKR theory allows a direct estimate of the surface free energy of interface as well as the work of adhesion (Wa) between solids. Early studies performed in this laboratory involved the determination of Wa between silicone (PDMS) and Al surfaces in order to establish the potential adhesive failure mechanisms. However, the JKR studies using commercial based PDMS [poly(dimethylsiloxane)] was fraught with difficulty that were attributed to the additives used in commercial PDMS

  7. Interactions of polysaccharide-based tissue adhesives with clinically relevant fibroblast and macrophage cell lines.

    Science.gov (United States)

    Bhatia, Sujata K; Arthur, Samuel D; Chenault, H Keith; Kodokian, George K

    2007-11-01

    The effects of polysaccharide-based tissue adhesives on cell survival and inflammatory cell activation were determined using in vitro mouse cell cultures. Cytotoxicity of tissue adhesives was evaluated by placing adhesives in direct contact with 3T3 fibroblast cells. Polysaccharide-based tissue adhesives composed of dextran aldehyde and star PEG amine were non-cytotoxic to fibroblasts; in contrast, a commercial adhesive composed of 2-octyl cyanoacrylate was highly cytotoxic to fibroblasts. The inflammatory potential of tissue adhesives was evaluated by exposing J774 macrophage cells to adhesives, and measuring TNF-alpha release from macrophages. Polysaccharide-based tissue adhesives did not elicit inflammatory TNF-alpha release from macrophages. These results suggest that polysaccharide-based tissue adhesives are non-cytotoxic and non-inflammatory; the results are therefore significant in the design of in vitro cell culture systems to study biomaterials.

  8. The adhesive strength and initial viscosity of denture adhesives.

    Science.gov (United States)

    Han, Jian-Min; Hong, Guang; Dilinuer, Maimaitishawuti; Lin, Hong; Zheng, Gang; Wang, Xin-Zhi; Sasaki, Keiichi

    2014-11-01

    To examine the initial viscosity and adhesive strength of modern denture adhesives in vitro. Three cream-type denture adhesives (Poligrip S, Corect Cream, Liodent Cream; PGS, CRC, LDC) and three powder-type denture adhesives (Poligrip Powder, New Faston, Zanfton; PGP, FSN, ZFN) were used in this study. The initial viscosity was measured using a controlled-stress rheometer. The adhesive strength was measured according to ISO-10873 recommended procedures. All data were analyzed independently by one-way analysis of variance combined with a Student-Newman-Keuls multiple comparison test at a 5% level of significance. The initial viscosity of all the cream-type denture adhesives was lower than the powder-type adhesives. Before immersion in water, all the powder-type adhesives exhibited higher adhesive strength than the cream-type adhesives. However, the adhesive strength of cream-type denture adhesives increased significantly and exceeded the powder-type denture adhesives after immersion in water. For powder-type adhesives, the adhesive strength significantly decreased after immersion in water for 60 min, while the adhesive strength of the cream-type adhesives significantly decreased after immersion in water for 180 min. Cream-type denture adhesives have lower initial viscosity and higher adhesive strength than powder type adhesives, which may offer better manipulation properties and greater efficacy during application.

  9. Direct observation of microcavitation in underwater adhesion of mushroom-shaped adhesive microstructure

    Directory of Open Access Journals (Sweden)

    Lars Heepe

    2014-06-01

    Full Text Available In this work we report on experiments aimed at testing the cavitation hypothesis [Varenberg, M.; Gorb, S. J. R. Soc., Interface 2008, 5, 383–385] proposed to explain the strong underwater adhesion of mushroom-shaped adhesive microstructures (MSAMSs. For this purpose, we measured the pull-off forces of individual MSAMSs by detaching them from a glass substrate under different wetting conditions and simultaneously video recording the detachment behavior at very high temporal resolution (54,000–100,000 fps. Although microcavitation was observed during the detachment of individual MSAMSs, which was a consequence of water inclusions present at the glass–MSAMS contact interface subjected to negative pressure (tension, the pull-off forces were consistently lower, around 50%, of those measured under ambient conditions. This result supports the assumption that the recently observed strong underwater adhesion of MSAMS is due to an air layer between individual MSAMSs [Kizilkan, E.; Heepe, L.; Gorb, S. N. Underwater adhesion of mushroom-shaped adhesive microstructure: An air-entrapment effect. In Biological and biomimetic adhesives: Challenges and opportunities; Santos, R.; Aldred, N.; Gorb, S. N.; Flammang, P., Eds.; The Royal Society of Chemistry: Cambridge, U.K., 2013; pp 65–71] rather than by cavitation. These results obtained due to the high-speed visualisation of the contact behavior at nanoscale-confined interfaces allow for a microscopic understanding of the underwater adhesion of MSAMSs and may aid in further development of artificial adhesive microstructures for applications in predominantly liquid environments.

  10. Arachnids secrete a fluid over their adhesive pads.

    Science.gov (United States)

    Peattie, Anne M; Dirks, Jan-Henning; Henriques, Sérgio; Federle, Walter

    2011-01-01

    Many arachnids possess adhesive pads on their feet that help them climb smooth surfaces and capture prey. Spider and gecko adhesives have converged on a branched, hairy structure, which theoretically allows them to adhere solely by dry (solid-solid) intermolecular interactions. Indeed, the consensus in the literature is that spiders and their smooth-padded relatives, the solifugids, adhere without the aid of a secretion. We investigated the adhesive contact zone of living spiders, solifugids and mites using interference reflection microscopy, which allows the detection of thin liquid films. Like insects, all the arachnids we studied left behind hydrophobic fluid footprints on glass (mean refractive index: 1.48-1.50; contact angle: 3.7-11.2°). Fluid was not always secreted continuously, suggesting that pads can function in both wet and dry modes. We measured the attachment forces of single adhesive setae from tarantulas (Grammostola rosea) by attaching them to a bending beam with a known spring constant and filming the resulting deflection. Individual spider setae showed a lower static friction at rest (26%±2.8 SE of the peak friction) than single gecko setae (Thecadactylus rapicauda; 96%±1.7 SE). This may be explained by the fact that spider setae continued to release fluid after isolation from the animal, lubricating the contact zone. This finding implies that tarsal secretions occur within all major groups of terrestrial arthropods with adhesive pads. The presence of liquid in an adhesive contact zone has important consequences for attachment performance, improving adhesion to rough surfaces and introducing rate-dependent effects. Our results leave geckos and anoles as the only known representatives of truly dry adhesive pads in nature. Engineers seeking biological inspiration for synthetic adhesives should consider whether model species with fluid secretions are appropriate to their design goals.

  11. Arachnids secrete a fluid over their adhesive pads.

    Directory of Open Access Journals (Sweden)

    Anne M Peattie

    Full Text Available BACKGROUND: Many arachnids possess adhesive pads on their feet that help them climb smooth surfaces and capture prey. Spider and gecko adhesives have converged on a branched, hairy structure, which theoretically allows them to adhere solely by dry (solid-solid intermolecular interactions. Indeed, the consensus in the literature is that spiders and their smooth-padded relatives, the solifugids, adhere without the aid of a secretion. METHODOLOGY AND PRINCIPAL FINDINGS: We investigated the adhesive contact zone of living spiders, solifugids and mites using interference reflection microscopy, which allows the detection of thin liquid films. Like insects, all the arachnids we studied left behind hydrophobic fluid footprints on glass (mean refractive index: 1.48-1.50; contact angle: 3.7-11.2°. Fluid was not always secreted continuously, suggesting that pads can function in both wet and dry modes. We measured the attachment forces of single adhesive setae from tarantulas (Grammostola rosea by attaching them to a bending beam with a known spring constant and filming the resulting deflection. Individual spider setae showed a lower static friction at rest (26%±2.8 SE of the peak friction than single gecko setae (Thecadactylus rapicauda; 96%±1.7 SE. This may be explained by the fact that spider setae continued to release fluid after isolation from the animal, lubricating the contact zone. SIGNIFICANCE: This finding implies that tarsal secretions occur within all major groups of terrestrial arthropods with adhesive pads. The presence of liquid in an adhesive contact zone has important consequences for attachment performance, improving adhesion to rough surfaces and introducing rate-dependent effects. Our results leave geckos and anoles as the only known representatives of truly dry adhesive pads in nature. Engineers seeking biological inspiration for synthetic adhesives should consider whether model species with fluid secretions are appropriate to their

  12. Surface wettability plays a significant role in gecko adhesion underwater.

    Science.gov (United States)

    Stark, Alyssa Y; Badge, Ila; Wucinich, Nicholas A; Sullivan, Timothy W; Niewiarowski, Peter H; Dhinojwala, Ali

    2013-04-16

    Although we now have thousands of studies focused on the nano-, micro-, and whole-animal mechanics of gecko adhesion on clean, dry substrates, we know relatively little about the effects of water on gecko adhesion. For many gecko species, however, rainfall frequently wets the natural surfaces they navigate. In an effort to begin closing this gap, we tested the adhesion of geckos on submerged substrates that vary in their wettability. When tested on a wet hydrophilic surface, geckos produced a significantly lower shear adhesive force (5.4 ± 1.33 N) compared with a dry hydrophilic surface (17.1 ± 3.93 N). In tests on an intermediate wetting surface and a hydrophobic surface, we found no difference in shear adhesion between dry and wet contact. Finally, in tests on polytetrafluoroethylene (PTFE), we found that geckos clung significantly better to wet PTFE (8.0 ± 1.09 N) than dry PTFE (1.6 ± 0.66 N). To help explain our results, we developed models based on thermodynamic theory of adhesion for contacting surfaces in different media and found that we can predict the ratio of shear adhesion in water to that in air. Our findings provide insight into how geckos may function in wet environments and also have significant implications for the development of a synthetic gecko mimic that retains adhesion in water.

  13. Reversible Thermoset Adhesives

    Science.gov (United States)

    Mac Murray, Benjamin C. (Inventor); Tong, Tat H. (Inventor); Hreha, Richard D. (Inventor)

    2016-01-01

    Embodiments of a reversible thermoset adhesive formed by incorporating thermally-reversible cross-linking units and a method for making the reversible thermoset adhesive are provided. One approach to formulating reversible thermoset adhesives includes incorporating dienes, such as furans, and dienophiles, such as maleimides, into a polymer network as reversible covalent cross-links using Diels Alder cross-link formation between the diene and dienophile. The chemical components may be selected based on their compatibility with adhesive chemistry as well as their ability to undergo controlled, reversible cross-linking chemistry.

  14. Adhesion at metal interfaces

    Science.gov (United States)

    Banerjea, Amitava; Ferrante, John; Smith, John R.

    1991-01-01

    A basic adhesion process is defined, the theory of the properties influencing metallic adhesion is outlined, and theoretical approaches to the interface problem are presented, with emphasis on first-principle calculations as well as jellium-model calculations. The computation of the energies of adhesion as a function of the interfacial separation is performed; fully three-dimensional calculations are presented, and universality in the shapes of the binding energy curves is considered. An embedded-atom method and equivalent-crystal theory are covered in the framework of issues involved in practical adhesion.

  15. Gecko adhesion: evolutionary nanotechnology.

    Science.gov (United States)

    Autumn, Kellar; Gravish, Nick

    2008-05-13

    If geckos had not evolved, it is possible that humans would never have invented adhesive nanostructures. Geckos use millions of adhesive setae on their toes to climb vertical surfaces at speeds of over 1ms-1. Climbing presents a significant challenge for an adhesive in requiring both strong attachment and easy rapid removal. Conventional pressure-sensitive adhesives (PSAs) are either strong and difficult to remove (e.g. duct tape) or weak and easy to remove (e.g. sticky notes). The gecko adhesive differs dramatically from conventional adhesives. Conventional PSAs are soft viscoelastic polymers that degrade, foul, self-adhere and attach accidentally to inappropriate surfaces. In contrast, gecko toes bear angled arrays of branched, hair-like setae formed from stiff, hydrophobic keratin that act as a bed of angled springs with similar effective elastic modulus to that of PSAs. Setae are self-cleaning and maintain function for months during repeated use in dirty conditions. Setae are an anisotropic 'frictional adhesive' in that adhesion requires maintenance of a proximally directed shear load, enabling either a tough bond or spontaneous detachment. Gecko-like synthetic adhesives may become the glue of the future-and perhaps the screw of the future as well.

  16. Prioritized Contact Transport Stream

    Science.gov (United States)

    Hunt, Walter Lee, Jr. (Inventor)

    2015-01-01

    A detection process, contact recognition process, classification process, and identification process are applied to raw sensor data to produce an identified contact record set containing one or more identified contact records. A prioritization process is applied to the identified contact record set to assign a contact priority to each contact record in the identified contact record set. Data are removed from the contact records in the identified contact record set based on the contact priorities assigned to those contact records. A first contact stream is produced from the resulting contact records. The first contact stream is streamed in a contact transport stream. The contact transport stream may include and stream additional contact streams. The contact transport stream may be varied dynamically over time based on parameters such as available bandwidth, contact priority, presence/absence of contacts, system state, and configuration parameters.

  17. The adhesion force of micronized Salmeterol Xinafoate particles to pharmaceutically relevant surface materials

    Science.gov (United States)

    Podczeck, F.; Newton, J. M.; James, M. B.

    1996-07-01

    The adhesion of micronized Salmeterol Xinafoate to various surface materials has been investigated by the centrifuge technique. The adhesion of the drug to these materials used for manufacture and storage of interactive mixtures of the drug and milled lactose monohydrate depends on different properties of the surfaces. A longer contact with polyvinylchloride, polyethylene or aluminium surfaces, or a contact with these surfaces under mechanical pressure should be avoided because the adhesion force between the drug and these surfaces is much higher than between the drug and excipient particles. Hence detachment and a consequent loss of drug in the formulation could occur. Such a problem does not appear to exist for the contact with polyhydroxymethylene surfaces. Characteristics of the surface materials such as the surface free energy (acid - base concept), surface roughness and Young's modulus were determined and related to the experimental results. The work of adhesion appeared to have a very important influence on the adhesion forces measured. About 20% of the work of adhesion was due to acid - base interactions. The larger the work of adhesion, the stronger was the adhesion between the particles and the surfaces in contact. Surface roughness reduced the adhesion force, and stiffer materials (having a high Young's modulus) were found to have a lower adhesion force to the drug particles.

  18. Contact material optimization and contact physics in metal-contact microelectromechanical systems (MEMS) switches

    Science.gov (United States)

    Yang, Zhenyin

    Metal-contact MEMS switches hold great promise for implementing agile radio frequency (RF) systems because of their small size, low fabrication cost, low power consumption, wide operational band, excellent isolation and exceptionally low signal insertion loss. Gold is often utilized as a contact material for metal-contact MEMS switches due to its excellent electrical conductivity and corrosion resistance. However contact wear and stiction are the two major failure modes for these switches due to its material softness and high surface adhesion energy. To strengthen the contact material, pure gold was alloyed with other metal elements. We designed and constructed a new micro-contacting test facility that closely mimic the typical MEMS operation and utilized this facility to efficiently evaluate optimized contact materials. Au-Ni binary alloy system as the candidate contact material for MEMS switches was systematically investigated. A correlation between contact material properties (etc. microstructure, micro-hardness, electrical resistivity, topology, surface structures and composition) and micro-contacting performance was established. It was demonstrated nano-scale graded two-phase Au-Ni film could possibly yield an improved device performance. Gold micro-contact degradation mechanisms were also systematically investigated by running the MEMS switching tests under a wide range of test conditions. According to our quantitative failure analysis, field evaporation could be the dominant failure mode for highfield (> critical threshold field) hot switching; transient thermal-assisted wear could be the dominant failure mode for low-field hot switching; on the other hand, pure mechanical wear and steady current heating (1 mA) caused much less contact degradation in cold switching tests. Results from low-force (50 muN/micro-contact), low current (0.1 mA) tests on real MEMS switches indicated that continuous adsorbed films from ambient air could degrade the switch contact

  19. The adhesion model considering capillarity for gecko attachment system.

    Science.gov (United States)

    Kim, Tae Wan; Bhushan, Bharat

    2008-03-06

    Geckos make use of approximately a million microscale hairs (setae) that branch off into hundreds of nanoscale spatulae to cling to different smooth and rough surfaces and detach at will. This hierarchical surface construction gives the gecko the adaptability to create a large real area of contact with surfaces. It is known that van der Waals force is the primary mechanism used to adhere to surfaces, and capillary force is a secondary effect that can further increase adhesive force. To investigate the effects of capillarity on gecko adhesion, we considered the capillary force as well as the solid-to-solid interaction. The capillary force expressed in terms of elliptical integral is calculated by numerical method to cope with surfaces with a wide range of contact angles. The adhesion forces exerted by a single gecko spatula in contact with planes with different contact angles for various relative humidities are calculated, and the contributions of capillary force to total adhesion force are evaluated. The simulation results are compared with experimental data. Finally, using the three-level hierarchical model recently developed to simulate a gecko seta contacting with random rough surface, the effect of the relative humidity and the hydrophobicity of surface on the gecko adhesion is investigated.

  20. Staphylococcus epidermidis adhesion on hydrophobic and hydrophilic textured biomaterial surfaces.

    Science.gov (United States)

    Xu, Li-Chong; Siedlecki, Christopher A

    2014-06-01

    It is of great interest to use nano- or micro-structured surfaces to inhibit microbial adhesion and biofilm formation and thereby to prevent biomaterial-associated infection, without modification of the surface chemistry or bulk properties of the materials and without use of the drugs. Our previous study showed that a submicron textured polyurethane surface can inhibit staphylococcal bacterial adhesion and biofilm formation. To further understand the effect of the geometry of textures on bacterial adhesion as well as the underlying mechanism, in this study, submicron and micron textured polyurethane surfaces featuring ordered arrays of pillars were fabricated and modified to have different wettabilities. All the textured surfaces were originally hydrophobic and showed significant reductions in Staphylococcus epidermidis RP62A adhesion in phosphate buffered saline or 25% platelet poor plasma solutions under shear, as compared to smooth surfaces. After being subjected to an air glow discharge plasma treatment, all polyurethane surfaces were modified to hydrophilic, and reductions in bacterial adhesion on surfaces were subsequently found to be dependent on the size of the patterns. The submicron patterned surfaces reduced bacterial adhesion, while the micron patterned surfaces led to increased bacterial adhesion. The extracellular polymeric substances (EPS) from the S. epidermidis cell surfaces were extracted and purified, and were coated on a glass colloidal surface so that the adhesion force and separation energy in interactions of the EPS and the surface could be measured by colloidal probe atomic force microscopy. These results were consistent with the bacterial adhesion observations. Overall, the data suggest that the increased surface hydrophobicity and the decreased availability of the contact area contributes to a reduction in bacterial adhesion to the hydrophobic textured surfaces, while the availability of the contact area is the primary determinant factor

  1. Transfer of adhesive tape between calender rolls

    Science.gov (United States)

    Johnson, K. L.; Kauzlarich, J. J.

    2004-03-01

    In the calendering process a tape or sheet of deformable material passes through the nip between hard cylindrical rollers. Usually the rolls are driven at the same peripheral speed, but small differences in speed, often referred to as 'creep', can occur if one of the rolls is externally driven and the other is driven by the friction in the contact. In these circumstances it has been observed that a tape that enters the nip adhering to the driven (slower) surface may transfer at exit to the driving (faster) surface but not the other way round. The mechanics of this transfer process is examined theoretically and experimentally in this paper for the case of double sided adhesive tape. It is argued that on emerging from the nip the tape will separate from the surface at which the shear strain in the adhesive is greater and that for transfer to occur the contact load must be sufficient to cause plastic extension of the tape.

  2. Myoferlin depletion elevates focal adhesion kinase and paxillin phosphorylation and enhances cell-matrix adhesion in breast cancer cells.

    Science.gov (United States)

    Blackstone, B N; Li, R; Ackerman, W E; Ghadiali, S N; Powell, H M; Kniss, D A

    2015-04-15

    Breast cancer is the second leading cause of malignant death among women. A crucial feature of metastatic cancers is their propensity to lose adhesion to the underlying basement membrane as they transition to a motile phenotype and invade surrounding tissue. Attachment to the extracellular matrix is mediated by a complex of adhesion proteins, including integrins, signaling molecules, actin and actin-binding proteins, and scaffolding proteins. Focal adhesion kinase (FAK) is pivotal for the organization of focal contacts and maturation into focal adhesions, and disruption of this process is a hallmark of early cancer invasive potential. Our recent work has revealed that myoferlin (MYOF) mediates breast tumor cell motility and invasive phenotype. In this study we demonstrate that noninvasive breast cancer cell lines exhibit increased cell-substrate adhesion and that silencing of MYOF using RNAi in the highly invasive human breast cancer cell line MDA-MB-231 also enhances cell-substrate adhesion. In addition, we detected elevated tyrosine phosphorylation of FAK (FAK(Y397)) and paxillin (PAX(Y118)), markers of focal adhesion protein activation. Morphometric analysis of PAX expression revealed that RNAi-mediated depletion of MYOF resulted in larger, more elongated focal adhesions, in contrast to cells transduced with a control virus (MDA-231(LVC) cells), which exhibited smaller focal contacts. Finally, MYOF silencing in MDA-MB-231 cells exhibited a more elaborate ventral cytoskeletal structure near focal adhesions, typified by pronounced actin stress fibers. These data support the hypothesis that MYOF regulates cell adhesions and cell-substrate adhesion strength and may account for the high degree of motility in invasive breast cancer cells. Copyright © 2015 the American Physiological Society.

  3. Adhesive compositions and methods

    Energy Technology Data Exchange (ETDEWEB)

    Allen, Scott D.; Sendijarevic, Vahid; O' Connor, James

    2017-12-05

    The present invention encompasses polyurethane adhesive compositions comprising aliphatic polycarbonate chains. In one aspect, the present invention encompasses polyurethane adhesives derived from aliphatic polycarbonate polyols and polyisocyanates wherein the polyol chains contain a primary repeating unit having a structure:. In another aspect, the invention provides articles comprising the inventive polyurethane compositions as well as methods of making such compositions.

  4. adhesive intestinal obstruction

    African Journals Online (AJOL)

    2006-06-01

    Jun 1, 2006 ... ABSTRACT. Background: Adhesions after abdominal and pelvic surgery are a major cause of intestinal obstruction in the western world and the pathology is steadily gaining prominence in our practice. Objective: To determine the magnitude of adhesive intestinal obstruction; to determine the types.

  5. Functionally Graded Adhesives

    Science.gov (United States)

    2009-11-01

    commonly used fillers (6). Titanium dioxide is used to add pigment to an adhesive (7). Fumed silica is employed as a rheology modifier (8). The goal of...provide pigment , increase volume, lower cost, modify 2 strength, and alter adhesive properties (3). Calcium carbonate and talc are inexpensive

  6. Soy protein adhesives

    Science.gov (United States)

    Charles R. Frihart

    2010-01-01

    In the quest to manufacture and use building materials that are more environmentally friendly, soy adhesives can be an important component. Trees fix and store carbon dioxide in the atmosphere. After the trees are harvested, machinery converts the wood into strands, which are then bonded together with adhesives to form strandboard, used in constructing long-lasting...

  7. Metal interfaces - Adhesive energies and electronic barriers

    Science.gov (United States)

    Ferrante, J.; Smith, J. R.

    1976-01-01

    We report a fully self-consistent calculation of the electron number density, barrier height and adhesive energy as a function of separation in an aluminum-aluminum (100) contact. The local density approximation is used for exchange and correlation. The electron number density and barrier heights are strong functions of the separation. The range of strong chemical bonding is about 0.2 nm.

  8. Carbohydrate mediated bacterial adhesion.

    Science.gov (United States)

    Pieters, Roland J

    2011-01-01

    In the process of adhesion, bacteria often carry proteins on their surface, adhesins, that bind to specific components of tissue cells or the extracellular matrix. In many cases these components are carbohydrate structures. The carbohydrate binding specificities of many bacteria have been uncovered over the years. The design and synthesis of inhibitors of bacterial adhesion has the potential to create new therapeutics for the prevention and possibly treatment of bacterial infections. Unfortunately, the carbohydrate structures often bind only weakly to the adhesion proteins, although drug design approaches can improve the situation. Furthermore, in some cases linking carbohydrates covalently together, to create so-called multivalent systems, can also significantly enhance the inhibitory potency. Besides adhesion inhibition as a potential therapeutic strategy, the adhesion proteins can also be used for detection. Novel methods to do this are being developed. These include the use of microarrays and glyconanoparticles. New developments in these areas are discussed.

  9. Prevention of bacterial adhesion

    DEFF Research Database (Denmark)

    Klemm, Per; Vejborg, Rebecca Munk; Hancock, Viktoria

    2010-01-01

    Management of bacterial infections is becoming increasingly difficult due to the emergence and increasing prevalence of bacterial pathogens that are resistant to available antibiotics. Conventional antibiotics generally kill bacteria by interfering with vital cellular functions, an approach...... that imposes selection pressure for resistant bacteria. New approaches are urgently needed. Targeting bacterial virulence functions directly is an attractive alternative. An obvious target is bacterial adhesion. Bacterial adhesion to surfaces is the first step in colonization, invasion, and biofilm formation....... As such, adhesion represents the Achilles heel of crucial pathogenic functions. It follows that interference with adhesion can reduce bacterial virulence. Here, we illustrate this important topic with examples of techniques being developed that can inhibit bacterial adhesion. Some of these will become...

  10. Biophysics of cadherin adhesion.

    Science.gov (United States)

    Leckband, Deborah; Sivasankar, Sanjeevi

    2012-01-01

    Since the identification of cadherins and the publication of the first crystal structures, the mechanism of cadherin adhesion, and the underlying structural basis have been studied with a number of different experimental techniques, different classical cadherin subtypes, and cadherin fragments. Earlier studies based on biophysical measurements and structure determinations resulted in seemingly contradictory findings regarding cadherin adhesion. However, recent experimental data increasingly reveal parallels between structures, solution binding data, and adhesion-based biophysical measurements that are beginning to both reconcile apparent differences and generate a more comprehensive model of cadherin-mediated cell adhesion. This chapter summarizes the functional, structural, and biophysical findings relevant to cadherin junction assembly and adhesion. We emphasize emerging parallels between findings obtained with different experimental approaches. Although none of the current models accounts for all of the available experimental and structural data, this chapter discusses possible origins of apparent discrepancies, highlights remaining gaps in current knowledge, and proposes challenges for further study.

  11. A microfabricated gecko-inspired controllable and reusable dry adhesive

    Science.gov (United States)

    Chary, Sathya; Tamelier, John; Turner, Kimberly

    2013-02-01

    Geckos utilize a robust reversible adhesive to repeatedly attach and detach from a variety of vertical and inverted surfaces, using structurally anisotropic micro- and nano-scale fibrillar structures. These fibers, when suitably articulated, are able to control the real area of contact and thereby generate high-to-low van der Waals forces. Key characteristics of the natural system include highly anisotropic adhesion and shear forces for controllable attachment, a high adhesion to initial preload force ratio (μ‧) of 8-16, lack of inter-fiber self-adhesion, and operation over more than 30 000 cycles without loss of adhesion performance. A highly reusable synthetic adhesive has been developed using tilted polydimethylsiloxane (PDMS) half-cylinder micron-scale fibers, retaining up to 77% of the initial value over 10 000 repeated test cycles against a flat glass puck. In comparison with other gecko-inspired adhesives tested over 10 000 cycles or more thus far, this paper reports the highest value of μ‧, along with a large shear force of ˜78 kPa, approaching the 88-226 kPa range of gecko toes. The anisotropic adhesion forces are close to theoretical estimates from the Kendall peel model, quantitatively showing how lateral shearing articulation in a manner similar to the gecko may be used to obtain adhesion anisotropy with synthetic fibers using a combination of tilt angle and anisotropic fiber geometry.

  12. Effects of hierarchical structures and insulating liquid media on adhesion

    Science.gov (United States)

    Yang, Weixu; Wang, Xiaoli; Li, Hanqing; Song, Xintao

    2017-11-01

    Effects of hierarchical structures and insulating liquid media on adhesion are investigated through a numerical adhesive contact model established in this paper, in which hierarchical structures are considered by introducing the height distribution into the surface gap equation, and media are taken into account through the Hamaker constant in Lifshitz-Hamaker approach. Computational methods such as inexact Newton method, bi-conjugate stabilized (Bi-CGSTAB) method and fast Fourier transform (FFT) technique are employed to obtain the adhesive force. It is shown that hierarchical structured surface exhibits excellent anti-adhesive properties compared with flat, micro or nano structured surfaces. Adhesion force is more dependent on the sizes of nanostructures than those of microstructures, and the optimal ranges of nanostructure pitch and maximum height for small adhesion force are presented. Insulating liquid media effectively decrease the adhesive interaction and 1-bromonaphthalene exhibits the smallest adhesion force among the five selected media. In addition, effects of hierarchical structures with optimal sizes on reducing adhesion are more obvious than those of the selected insulating liquid media.

  13. Elasto-capillarity in insect fibrillar adhesion.

    Science.gov (United States)

    Gernay, Sophie; Federle, Walter; Lambert, Pierre; Gilet, Tristan

    2016-08-01

    The manipulation of microscopic objects is challenging because of high adhesion forces, which render macroscopic gripping strategies unsuitable. Adhesive footpads of climbing insects could reveal principles relevant for micro-grippers, as they are able to attach and detach rapidly during locomotion. However, the underlying mechanisms are still not fully understood. In this work, we characterize the geometry and contact formation of the adhesive setae of dock beetles (Gastrophysa viridula) by interference reflection microscopy. We compare our experimental results to the model of an elastic beam loaded with capillary forces. Fitting the model to experimental data yielded not only estimates for seta adhesion and compliance in agreement with previous direct measurements, but also previously unknown parameters such as the volume of the fluid meniscus and the bending stiffness of the tip. In addition to confirming the primary role of surface tension for insect adhesion, our investigation reveals marked differences in geometry and compliance between the three main kinds of seta tips in leaf beetles. © 2016 The Author(s).

  14. A reversible wet/dry adhesive inspired by mussels and geckos.

    Science.gov (United States)

    Lee, Haeshin; Lee, Bruce P; Messersmith, Phillip B

    2007-07-19

    The adhesive strategy of the gecko relies on foot pads composed of specialized keratinous foot-hairs called setae, which are subdivided into terminal spatulae of approximately 200 nm (ref. 1). Contact between the gecko foot and an opposing surface generates adhesive forces that are sufficient to allow the gecko to cling onto vertical and even inverted surfaces. Although strong, the adhesion is temporary, permitting rapid detachment and reattachment of the gecko foot during locomotion. Researchers have attempted to capture these properties of gecko adhesive in synthetic mimics with nanoscale surface features reminiscent of setae; however, maintenance of adhesive performance over many cycles has been elusive, and gecko adhesion is greatly diminished upon full immersion in water. Here we report a hybrid biologically inspired adhesive consisting of an array of nanofabricated polymer pillars coated with a thin layer of a synthetic polymer that mimics the wet adhesive proteins found in mussel holdfasts. Wet adhesion of the nanostructured polymer pillar arrays increased nearly 15-fold when coated with mussel-mimetic polymer. The system maintains its adhesive performance for over a thousand contact cycles in both dry and wet environments. This hybrid adhesive, which combines the salient design elements of both gecko and mussel adhesives, should be useful for reversible attachment to a variety of surfaces in any environment.

  15. Shape of red blood cells in contact with artificial surfaces.

    Science.gov (United States)

    Grzhibovskis, Richards; Krämer, Elisabeth; Bernhardt, Ingolf; Kemper, Björn; Zanden, Carl; Repin, Nikolay V; Tkachuk, Bogdan V; Voinova, Marina V

    2017-03-01

    The phenomenon of physical contact between red blood cells and artificial surfaces is considered. A fully three-dimensional mathematical model of a bilayer membrane in contact with an artificial surface is presented. Numerical results for the different geometries and adhesion intensities are found to be in agreement with experimentally observed geometries obtained by means of digital holographic microscopy.

  16. A Diagram for Evaluating Delamination of GFRP/Stainless-steel Adhesive Joints by Using Stress Singularity Parameters

    Science.gov (United States)

    Iwasa, Masaaki

    Static tests on double-lap and T-type adhesive joints were performed. We developed a device that applies contact pressure to glass-fiber reinforced plastics/stainless-steel double-lap adhesive joints. The device contains a bolt with which a strain gauge is bonded for controlling contact pressure. Using this device, we investigated the effect of contact pressure on the delamination strength of double-lap adhesive joints. We applied tensile shear loading to double-lap adhesive joints under contact pressure to their adhesive interfaces. We found that the delamination strength of the double-lap adhesive joints increased with increasing contact pressure. On the contrary, when we applied compressive shear stress to them, the delamination strength stayed constant. Therefore the delamination strength of double-lap adhesive joints is dominated by normal stress when contact pressure under tensile shear loading is applied. On the other hand, it was dominated by shear stress when contact pressure under compressive shear loading was applied. Then stress singularity parameters for double-lap and T-type adhesive joints were performed by the FEM. Stress distributions near the bonding edge could be expressed by the stress singularity parameters. Finally, a delamination evaluation diagram using stress singularity parameters was developed. This diagram enables us to evaluate the delamination strength of adhesive joints.

  17. Preventing mussel adhesion using lubricant-infused materials

    Science.gov (United States)

    Amini, Shahrouz; Kolle, Stefan; Petrone, Luigi; Ahanotu, Onyemaechi; Sunny, Steffi; Sutanto, Clarinda N.; Hoon, Shawn; Cohen, Lucas; Weaver, James C.; Aizenberg, Joanna; Vogel, Nicolas; Miserez, Ali

    2017-08-01

    Mussels are opportunistic macrofouling organisms that can attach to most immersed solid surfaces, leading to serious economic and ecological consequences for the maritime and aquaculture industries. We demonstrate that lubricant-infused coatings exhibit very low preferential mussel attachment and ultralow adhesive strengths under both controlled laboratory conditions and in marine field studies. Detailed investigations across multiple length scales—from the molecular-scale characterization of deposited adhesive proteins to nanoscale contact mechanics to macroscale live observations—suggest that lubricant infusion considerably reduces fouling by deceiving the mechanosensing ability of mussels, deterring secretion of adhesive threads, and decreasing the molecular work of adhesion. Our study demonstrates that lubricant infusion represents an effective strategy to mitigate marine biofouling and provides insights into the physical mechanisms underlying adhesion prevention.

  18. Dissecting signaling and functions of adhesion G protein-coupled receptors

    DEFF Research Database (Denmark)

    Araç, Demet; Aust, Gabriela; Calebiro, Davide

    2012-01-01

    G protein-coupled receptors (GPCRs) comprise an expanded superfamily of receptors in the human genome. Adhesion class G protein-coupled receptors (adhesion-GPCRs) form the second largest class of GPCRs. Despite the abundance, size, molecular structure, and functions in facilitating cell and matrix...... contacts in a variety of organ systems, adhesion-GPCRs are by far the most poorly understood GPCR class. Adhesion-GPCRs possess a unique molecular structure, with extended N-termini containing various adhesion domains. In addition, many adhesion-GPCRs are autoproteolytically cleaved into an N......-terminal fragment (NTF, NT, α-subunit) and C-terminal fragment (CTF, CT, β-subunit) at a conserved GPCR autoproteolysis-inducing (GAIN) domain that contains a GPCR proteolysis site (GPS). These two features distinguish adhesion-GPCRs from other GPCR classes. Though active research on adhesion-GPCRs in diverse areas...

  19. Mussel adhesion - essential footwork.

    Science.gov (United States)

    Waite, J Herbert

    2017-02-15

    Robust adhesion to wet, salt-encrusted, corroded and slimy surfaces has been an essential adaptation in the life histories of sessile marine organisms for hundreds of millions of years, but it remains a major impasse for technology. Mussel adhesion has served as one of many model systems providing a fundamental understanding of what is required for attachment to wet surfaces. Most polymer engineers have focused on the use of 3,4-dihydroxyphenyl-l-alanine (Dopa), a peculiar but abundant catecholic amino acid in mussel adhesive proteins. The premise of this Review is that although Dopa does have the potential for diverse cohesive and adhesive interactions, these will be difficult to achieve in synthetic homologs without a deeper knowledge of mussel biology; that is, how, at different length and time scales, mussels regulate the reactivity of their adhesive proteins. To deposit adhesive proteins onto target surfaces, the mussel foot creates an insulated reaction chamber with extreme reaction conditions such as low pH, low ionic strength and high reducing poise. These conditions enable adhesive proteins to undergo controlled fluid-fluid phase separation, surface adsorption and spreading, microstructure formation and, finally, solidification. © 2017. Published by The Company of Biologists Ltd.

  20. Adhesion and friction in gecko toe attachment and detachment.

    Science.gov (United States)

    Tian, Yu; Pesika, Noshir; Zeng, Hongbo; Rosenberg, Kenny; Zhao, Boxin; McGuiggan, Patricia; Autumn, Kellar; Israelachvili, Jacob

    2006-12-19

    Geckos can run rapidly on walls and ceilings, requiring high friction forces (on walls) and adhesion forces (on ceilings), with typical step intervals of approximately 20 ms. The rapid switching between gecko foot attachment and detachment is analyzed theoretically based on a tape model that incorporates the adhesion and friction forces originating from the van der Waals forces between the submicron-sized spatulae and the substrate, which are controlled by the (macroscopic) actions of the gecko toes. The pulling force of a spatula along its shaft with an angle between theta 0 and 90 degrees to the substrate, has a "normal adhesion force" contribution, produced at the spatula-substrate bifurcation zone, and a "lateral friction force" contribution from the part of spatula still in contact with the substrate. High net friction and adhesion forces on the whole gecko are obtained by rolling down and gripping the toes inward to realize small pulling angles between the large number of spatulae in contact with the substrate. To detach, the high adhesion/friction is rapidly reduced to a very low value by rolling the toes upward and backward, which, mediated by the lever function of the setal shaft, peels the spatulae off perpendicularly from the substrates. By these mechanisms, both the adhesion and friction forces of geckos can be changed over three orders of magnitude, allowing for the swift attachment and detachment during gecko motion. The results have obvious implications for the fabrication of dry adhesives and robotic systems inspired by the gecko's locomotion mechanism.

  1. Focal Adhesion Induction at the Tip of a Functionalized Nanoelectrode.

    Science.gov (United States)

    Fuentes, Daniela E; Bae, Chilman; Butler, Peter J

    2011-12-01

    Cells dynamically interact with their physical micro-environment through the assembly of nascent focal contacts and focal adhesions. The dynamics and mechanics of these contact points are controlled by transmembrane integrins and an array of intracellular adaptor proteins. In order to study the mechanics and dynamics of focal adhesion assembly, we have developed a technique for the timed induction of a nascent focal adhesion. Bovine aortic endothelial cells were approached at the apical surface by a nanoelectrode whose position was controlled with a resolution of 10s of nanometers using changes in electrode current to monitor distance from the cell surface. Since this probe was functionalized with fibronectin, a focal contact formed at the contact location. Nascent focal adhesion assembly was confirmed using time-lapse confocal fluorescent images of red fluorescent protein (RFP) - tagged talin, an adapter protein that binds to activated integrins. Binding to the cell was verified by noting a lack of change of electrode current upon retraction of the electrode. This study demonstrates that functionalized nanoelectrodes can enable precisely-timed induction and 3-D mechanical manipulation of focal adhesions and the assay of the detailed molecular kinetics of their assembly.

  2. Handbook of adhesion

    CERN Document Server

    Packham, D E

    2006-01-01

    This second edition of the successful Handbook of Adhesion provides concise and authoritative articles covering many aspects of the science and technology associated with adhesion and adhesives. It is intended to fill a gap between the necessarily simplified treatment of the student textbook and the full and thorough treatment of the research monograph and review article. The articles are structured in such a way, with internal cross-referencing and external literature references, that the reader can build up a broader and deeper understanding, as their needs require.This second edition includ

  3. Contact Allergy To Hard Contact Lens

    Directory of Open Access Journals (Sweden)

    J S Pasricha

    1985-01-01

    Full Text Available Three patients developed recurrent irritation, redness and watery discharge from their eyes after using hard contact lens. Patch tests were positive with the material of the hard contact lens and negative with teepol, sodium lauryl sulphate and material of the soft contact lens. All the three patients became alright after they stopped,using hard contact lens.

  4. Lipstick Induced Contact Leucoderma

    Directory of Open Access Journals (Sweden)

    Gupta Lalit Kumar

    2001-01-01

    Full Text Available Lipstick is a commonly used cosmetic. Its use may sometimes lead to contact dermatitis. Contact leucoderma to lipsticks however, is not common. We report a patient developing contact leucoderma to lipstick in association with contact dermatitis.

  5. Lipstick Induced Contact Leucoderma

    OpenAIRE

    Gupta Lalit Kumar; Jain Suresh Kumar; Khare Ashok Kumar

    2001-01-01

    Lipstick is a commonly used cosmetic. Its use may sometimes lead to contact dermatitis. Contact leucoderma to lipsticks however, is not common. We report a patient developing contact leucoderma to lipstick in association with contact dermatitis.

  6. EDITORIAL: Close contact Close contact

    Science.gov (United States)

    Demming, Anna

    2010-07-01

    The development of scanning probe techniques, such as scanning tunnelling microscopy [1], has often been touted as the catalyst for the surge in activity and progress in nanoscale science and technology. Images of nanoscale structural detail have served as an invaluable investigative resource and continue to fascinate with the fantastical reality of an intricate nether world existing all around us, but hidden from view of the naked eye by a disparity in scale. As is so often the case, the invention of the scanning tunnelling microscope heralded far more than just a useful new apparatus, it demonstrated the scope for exploiting the subtleties of electronic contact. The shrinking of electronic devices has been a driving force for research into molecular electronics, in which an understanding of the nature of electronic contact at junctions is crucial. In response, the number of experimental techniques in molecular electronics has increased rapidly in recent years. Scanning tunnelling microscopes have been used to study electron transfer through molecular films on a conducting substrate, and the need to monitor the contact force of scanning tunnelling electrodes led to the use of atomic force microscopy probes coated in a conducting layer as studied by Cui and colleagues in Arizona [2]. In this issue a collaboration of researchers at Delft University and Leiden University in the Netherlands report a new device architecture for the independent mechanical and electrostatic tuning of nanoscale charge transport, which will enable thorough studies of molecular transport in the future [3]. Scanning probes can also be used to pattern surfaces, such as through spatially-localized Suzuki and Heck reactions in chemical scanning probe lithography. Mechanistic aspects of spatially confined Suzuki and Heck chemistry are also reported in this issue by researchers in Oxford [4]. All these developments in molecular electronics fabrication and characterization provide alternative

  7. Multiscale Modeling of Stiffness, Friction and Adhesion in Mechanical Contacts

    Science.gov (United States)

    2012-02-29

    College London, Dec. 9, 2010 13) "Friction forces from atomic to macroscopic scales," XXXIV Encontro Nacional de Fisica da Materia Condensada, Iguassu...solid. Here, we develop a transfer matrix formulation of the Green’s function that can be used to renormalize the elastic interaction of any...crystalline solid for which the dynamical matrix is known. Such transfer matrix formulations have been traditionally used in the analysis of the electronic [5

  8. Innovative Electrostatic Adhesion Technologies

    Science.gov (United States)

    Bryan, Tom; Macleod, Todd; Gagliano, Larry; Williams, Scott; McCoy, Brian

    2015-01-01

    Developing specialized Electro-Static grippers (commercially used in Semiconductor Manufacturing and in package handling) will allow gentle and secure Capture, Soft Docking, and Handling of a wide variety of materials and shapes (such as upper-stages, satellites, arrays, and possibly asteroids) without requiring physical features or cavities for a pincher or probe or using harpoons or nets. Combined with new rigid boom mechanisms or small agile chaser vehicles, flexible, high speed Electro-Static Grippers can enable compliant capture of spinning objects starting from a safe stand-off distance. Electroadhesion (EA) can enable lightweight, ultra-low-power, compliant attachment in space by using an electrostatic force to adhere similar and dissimilar surfaces. A typical EA enabled device is composed of compliant space-rated materials, such as copper-clad polyimide encapsulated by polymers. Attachment is induced by strong electrostatic forces between any substrate material, such as an exterior satellite panel and a compliant EA gripper pad surface. When alternate positive and negative charges are induced in adjacent planar electrodes in an EA surface, the electric fields set up opposite charges on the substrate and cause an electrostatic adhesion between the electrodes and the induced charges on the substrate. Since the electrodes and the polymer are compliant and can conform to uneven or rough surfaces, the electrodes can remain intimately close to the entire surface, enabling high clamping pressures. Clamping pressures of more than 3 N/cm2 in shear can be achieved on a variety of substrates with ultra-low holding power consumption (measured values are less than 20 microW/Newton weight held). A single EA surface geometry can be used to clamp both dielectric and conductive substrates, with slightly different physical mechanisms. Furthermore EA clamping requires no normal force be placed on the substrate, as conventional docking requires. Internally funded research and

  9. Bioinspired pressure actuated adhesive system

    NARCIS (Netherlands)

    Paretkar, D.R.; Kamperman, M.M.G.; Schneider, A.S.; Martina, D.; Creton, C.; Arzt, E.

    2011-01-01

    We developed a dry synthetic adhesive system inspired by gecko feet adhesion that can switch reversibly from adhesion to non-adhesion with applied pressure as external stimulus. Micropatterned polydimethylsiloxane (PDMS) surfaces with pillars of 30 µm length and 10 µm diameter were fabricated using

  10. Cohesion and Adhesion with Proteins

    Science.gov (United States)

    Charles R. Frihart

    2016-01-01

    With increasing interest in bio-based adhesives, research on proteins has expanded because historically they have been used by both nature and humans as adhesives. A wide variety of proteins have been used as wood adhesives. Ancient Egyptians most likely used collagens tobond veneer to wood furniture, then came casein (milk), blood, fish scales, and soy adhesives, with...

  11. Prevention of bacterial adhesion

    DEFF Research Database (Denmark)

    Klemm, Per; Vejborg, Rebecca Munk; Hancock, Viktoria

    2010-01-01

    Management of bacterial infections is becoming increasingly difficult due to the emergence and increasing prevalence of bacterial pathogens that are resistant to available antibiotics. Conventional antibiotics generally kill bacteria by interfering with vital cellular functions, an approach...... that imposes selection pressure for resistant bacteria. New approaches are urgently needed. Targeting bacterial virulence functions directly is an attractive alternative. An obvious target is bacterial adhesion. Bacterial adhesion to surfaces is the first step in colonization, invasion, and biofilm formation...

  12. Nudel and FAK as antagonizing strength modulators of nascent adhesions through paxillin.

    Directory of Open Access Journals (Sweden)

    Yongli Shan

    2009-05-01

    Full Text Available Adhesion and detachment are coordinated critical steps during cell migration. Conceptually, efficient migration requires both effective stabilization of membrane protrusions at the leading edge via nascent adhesions and their successful persistence during retraction of the trailing side via disruption of focal adhesions. As nascent adhesions are much smaller in size than focal adhesions, they are expected to exhibit a stronger adhesivity in order to achieve the coordination between cell front and back. Here, we show that Nudel knockdown by interference RNA (RNAi resulted in cell edge shrinkage due to poor adhesions of membrane protrusions. Nudel bound to paxillin, a scaffold protein of focal contacts, and colocalized with it in areas of active membrane protrusions, presumably at nascent adhesions. The Nudel-paxillin interaction was disrupted by focal adhesion kinase (FAK in a paxillin-binding-dependent manner. Forced localization of Nudel in all focal contacts by fusing it to paxillin markedly strengthened their adhesivity, whereas overexpression of structurally activated FAK or any paxillin-binding FAK mutant lacking the N-terminal autoinhibitory domain caused cell edge shrinkage. These results suggest a novel mechanism for selective reinforcement of nascent adhesions via interplays of Nudel and FAK with paxillin to facilitate cell migration.

  13. Orthodontic adhesives induce human gingival fibroblast toxicity and inflammation.

    Science.gov (United States)

    Huang, Tsui-Hsien; Liao, Pao-Hsin; Li, Han Yu; Ding, Shinn Jyh; Yen, Min; Kao, Chia-Tze

    2008-05-01

    To test the null hypothesis that the resin base and the resin hybrid glass ionomer base adhesives do not cause inflammation after contacting primary human gingival fibroblasts in vitro. The resin base and resin hybrid glass ionomer base adhesives were used to treat human gingival fibroblasts to evaluate the survival rate using MTT colorimetric assay to detect the level of cyclooxygenase-2 (COX-2) mRNA by reverse transcription polymerase chain reaction (RT-PCR) technique and COX-2 protein expression using Western blot analysis. The results were analyzed using one-way analysis of variance (ANOVA). Tests of differences of the treatments were analyzed using the Tukey test and a value of P adhesive and the liquid of glass ionomer adhesive showed decreasing survival rates after 24 hours of treatment (P adhesives induced COX-2 protein expression in human gingival fibroblasts. The exposure of quiescent human gingival fibroblasts to adhesives resulted in the induction of COX-2 mRNA expression. The investigations of the time-dependent COX-2 mRNA expression in adhesive-treated human gingival fibroblasts revealed different patterns. The hypothesis is rejected. For orthodontic patients with gingival inflammation, except for those with oral hygiene problems, the activation of COX-2 expression by orthodontic adhesive may be one of the potential mechanisms.

  14. Antibacterial properties of self-etching dental adhesive systems.

    Science.gov (United States)

    Feuerstein, Osnat; Matalon, Shlomo; Slutzky, Hagay; Weiss, Ervin I

    2007-03-01

    Dental adhesives with antibacterial properties may reduce recurrent or secondary caries. The authors conducted a study to examine the immediate and long-lasting antibacterial properties of four self-etching adhesive systems. The authors used the agar diffusion test (ADT) and direct contact test (DCT) to measure the antibacterial properties of AdheSe (Ivoclar Vivadent, Schaan, Liechtenstein), Adper Prompt L-Pop (3M ESPE, Seefeld, Germany), Clearfil Protect Bond (Kuraray, Kurashiki, Okayama, Japan) and Xeno III (Dentsply, Konstanz, Germany) on Streptoccocus mutans after aging samples in phosphate-buffered saline for one, two, seven and 14 days. Only Clearfil Protect Bond showed an inhibition halo in the ADT. In the DCT, fresh samples of all of the tested materials exhibited potent antibacterial properties, which were maintained by AdheSe for one day and Clearfil Protect Bond for seven days. None of the adhesive systems exhibited any antibacterial properties after 14 days. All of the tested adhesives had an immediate bactericidal effect on S. mutans. None, however, had long-lasting antibacterial properties. The application of self-etching adhesive materials could contribute to the immediate elimination of residual bacteria. The likelihood of developing secondary caries as a consequence of bacterial microleakage may not be affected by the use of the adhesive systems tested in this study.

  15. Polymeric Nanoelectrodes for Investigating Cellular Adhesion

    Science.gov (United States)

    Thapa, Prem; Paneru, Govind; Flanders, Bret

    2011-03-01

    Polyethylene dioxythiophene nano-filaments were grown on lithographic electrode arrays by the recently developed directed electrochemical nanowire assembly technique. These filaments are firmly attached to the electrode but are not attached to the glass substrate. Hence, they behave like cantilevered rods (with one free end). Individual cells of the slime mold Dictystolium discoideum initiate contact by extending pseudopods to the nanoelectrodes when cultured on the electrode arrays. Scanning electron micrographs of the interfaces show the contact area to be of the order of 0.1 μ m 2 . Confocal images reveal the focal adhesions in the cell-electrode contact region. Deflection of the nanoelectrode by an individual cell can be used to measure the force exerted by the cell. Recent results on this innovative force sensing approach will be discussed. NSF.

  16. Effect of leaning angle of gecko-inspired slanted polymer nanohairs on dry adhesion

    Science.gov (United States)

    Jeong, Hoon Eui; Lee, Jin-Kwan; Kwak, Moon Kyu; Moon, Sang Heup; Suh, Kahp Yang

    2010-01-01

    We present analysis of adhesion properties of angled polymer nanohairs with a wide range of leaning angles from 0° to 45° and ultraviolet (UV)-curable polyurethane acrylate (PUA) materials of two different elastic moduli (19.8 and 320 MPa). It is demonstrated that shear adhesion and adhesion hysteresis can be greatly enhanced by increasing the leaning angle of nanohairs both for soft and hard materials due to increased contact area and reduced structural stiffness.

  17. Improved adhesion for thermoplastic polymers using oxyfluorination

    Science.gov (United States)

    Achereiner, F.; Münstedt, H.; Zeiler, T.

    2008-03-01

    Industrial applications of thermoplastic polymers are often limited by their poor adhesion properties. In this work the effect of surface oxyfluorination on the adhesion properties was investigated for polyethylene (PE), polyoxymethylene (POM), polybutylene terephthalate (PBT) and polyamide 6 (PA6). The adhesive joint strength was quantified using lap-shear tests. These results were correlated with the changes in the chemical composition of the surface, determined by X-ray photoelectron spectroscopy (XPS), in the surface free energy, measured by the contact angle method, and in the topography, using white-light confocal microscopy. The adhesive strength is strongly improved for all four polymers, but the degree of this increase depends on the polymer type. The surface free energy shows a similar trend for all four polymers. A high surface free energy exceeding 50 mN/m was observed after oxy-fluorination, whereby the polar component was strongly predominant. Surface topography measurements show no significant increase of the surface roughness. So the effect of oxyfluorination results primarily in increased wettability and polarity, due to changes of the chemical composition of the surface. XPS measurements confirm the integration of fluorine and oxygen groups in the polymer chain, which correlates with the increased polarity.

  18. Structure and mechanism of cadherins and catenins in cell-cell contacts.

    Science.gov (United States)

    Pokutta, Sabine; Weis, William I

    2007-01-01

    Cadherins are Ca(2+)-dependent cell adhesion molecules found in several kinds of cell-cell contact, including adherens junctions and desmosomes. In the presence of Ca(2+), cells expressing the same type of cadherin form stable contacts with one another, a phenomenon designated homophilic, or homotypic, adhesion. Most cadherins are single-pass transmembrane proteins whose extracellular regions mediate specific cell-cell interactions. The intracellular faces of these contacts are associated with the actin cytoskeleton in adherens junctions or the intermediate-filament system in desmosomes. The close coordination of the transmembrane adhesion molecules with the cytoskeleton is believed to be essential in coordinating morphogenetic movements of tissues during development and in conferring the appropriate mechanical properties to cell-cell contacts. Structural, biochemical, and biophysical analysis of the molecules that comprise these contacts has provided unique mechanistic insights into the specificity of homophilic adhesion, the functional connection to the underlying cytoskeleton, and the dynamics of junction formation.

  19. Size-dependent adhesion of nanoparticles on rough substrates

    CERN Document Server

    Chow, T S

    2003-01-01

    When the size of particles varies over the entire realm of nanotechnology, we find that surface forces can change by orders of magnitude depending on how surface interactions are influenced by the irregular fluctuations of rough surfaces at all length scales from atoms to microns. The length scales and roughness exponent define the distribution of asperities at points of contact and the adhesion that is maintained by van der Waals forces and contact deformation via asperities. (letter to the editor)

  20. The effect of contaminants on the adhesion of the spatulae of a gecko

    Indian Academy of Sciences (India)

    Many researchers have reported that the robust adhesion that enables geckos to move quickly and securely across a range of vertical and horizontal surfaces is provided by the hierarchical structure of their feet (i.e. lamellae, setae, spatulae, etc.). Maintaining this robust adhesion requires an intimate contact between the ...

  1. Effect of atmospheric-pressure plasma treatment on the adhesion properties of a thin adhesive layer in a selective transfer process

    Science.gov (United States)

    Yoon, Min-Ah; Kim, Chan; Hur, Min; Kang, Woo Seok; Kim, Jaegu; Kim, Jae-Hyun; Lee, Hak-Joo; Kim, Kwang-Seop

    2018-01-01

    The adhesion between a stamp and thin film devices is crucial for their transfer on a flexible substrate. In this paper, a thin adhesive silicone layer on the stamp was treated by atmospheric pressure plasma to locally control the adhesion strength for the selective transfer. The adhesion strength of the silicone layer was significantly reduced after the plasma treatment, while its surface energy was increased. To understand the inconsistency between the adhesion strength and surface energy changes, the surface properties of the silicone layer were characterized using nanoindentation and X-ray photoelectron spectroscopy. These techniques revealed that a thin, hard, silica-like layer had formed on the surface from plasma-enhanced oxidation. This layer played an important role in decreasing the contact area and increasing the interfacial slippage, resulting in decreased adhesion. As a practical application, the transfer process was demonstrated on GaN LEDs that had been previously delaminated by a laser lift-off (LLO) process. Although the LEDs were not transferred onto the treated adhesive layer due to the reduced adhesion, the untreated adhesive layer could readily pick up the LEDs. It is expected that this simple method of controlling the adhesion of a stamp with a thin adhesive layer would enable a continuous, selective and large-scale roll-to-roll selective transfer process and thereby advance the development of flexible, stretchable and wearable electronics.

  2. A Strong Contractile Actin Fence and Large Adhesions Direct Human Pluripotent Colony Morphology and Adhesion

    Directory of Open Access Journals (Sweden)

    Elisa Närvä

    2017-07-01

    Full Text Available Cell-type-specific functions and identity are tightly regulated by interactions between the cell cytoskeleton and the extracellular matrix (ECM. Human pluripotent stem cells (hPSCs have ultimate differentiation capacity and exceptionally low-strength ECM contact, yet the organization and function of adhesion sites and associated actin cytoskeleton remain poorly defined. We imaged hPSCs at the cell-ECM interface with total internal reflection fluorescence microscopy and discovered that adhesions at the colony edge were exceptionally large and connected by thick ventral stress fibers. The actin fence encircling the colony was found to exert extensive Rho-ROCK-myosin-dependent mechanical stress to enforce colony morphology, compaction, and pluripotency and to define mitotic spindle orientation. Remarkably, differentiation altered adhesion organization and signaling characterized by a switch from ventral to dorsal stress fibers, reduced mechanical stress, and increased integrin activity and cell-ECM adhesion strength. Thus, pluripotency appears to be linked to unique colony organization and adhesion structure.

  3. Effects of surface roughness and energy on ice adhesion strength

    Energy Technology Data Exchange (ETDEWEB)

    Zou, M., E-mail: mzou@uark.edu [Department of Mechanical Engineering, University of Arkansas, Fayetteville, AR 72701 (United States); Beckford, S. [Department of Mechanical Engineering, University of Arkansas, Fayetteville, AR 72701 (United States); Wei, R.; Ellis, C. [Southwest Research Institute, 6220 Culebra Road, San Antonio, TX 78238 (United States); Hatton, G. [Shell Global Solutions, Inc., Houston, TX 77210 (United States); Miller, M.A. [Southwest Research Institute, 6220 Culebra Road, San Antonio, TX 78238 (United States)

    2011-02-01

    The aim of this study is to investigate the effects of surface roughness and surface energy on ice adhesion strength. Sandblasting technique was used to prepare samples with high roughness. Silicon-doped hydrocarbon and fluorinated-carbon thin films were employed to alter the surface energy of the samples. Silicon-doped hydrocarbon films were deposited by plasma-enhanced chemical vapor deposition, while fluorinated-carbon films were produced using deep reactive ion etching equipment by only activating the passivation step. Surface topographies were characterized using scanning electron microscopy and a stylus profilometer. The surface wetting properties were characterized by a video-based contact angle measurement system. The adhesion strength of ice formed from a water droplet on these surfaces was studied using a custom-built shear force test apparatus. It was found that the ice adhesion strength is correlated to the water contact angles of the samples only for surfaces with similar roughness: the ice adhesion strength decreases with the increase in water contact angle. The study also shows that smoother as-received sample surfaces have lower ice adhesion strength than the much rougher sandblasted surfaces.

  4. Determination of adhesion forces between smooth and structured solids

    Science.gov (United States)

    Fischer, Hartmut R.; Gelinck, Edwin R. M.

    2012-09-01

    Surfaces tend to be made smoother in order to gain flatness or in order to fulfill the need for more precise and reproducible positioning of parts. Adhesion or even sticking of the surfaces is a major showstopper for these applications. There are several measures that can be taken in order to reduce spontaneous adhesion. Quantification of the effectiveness of the chosen solution is most often done using an atomic force microscope (AFM) with probes varying from 1 nm to 8 μm of contact diameter. A serious disadvantage in measuring adhesion by sharp tips is the wear of the tips. Sharp tips wear easily, resulting in undefined contact areas. When the real area of contact is not well defined, the quantification of the adhesion force is not significant. In the current study results of AFM measurements from literature with different tip diameters of colloidal probes are compared with AFM cantilevers with a plateau tip and using probes from large spheres using an alternative setup in combination with a Universal Nano-mechanical Analyzer (UNAT). Test results are shown. Another part of the study deals with a deliberately roughening of smooth surfaces to minimize (spontaneous) adhesion. Good agreement has been found with existing results.

  5. Confocal microscopy-based goniometry of barnacle cyprid permanent adhesive.

    Science.gov (United States)

    Aldred, Nick; Gohad, Neeraj V; Petrone, Luigi; Orihuela, Beatriz; Liedberg, Bo; Ederth, Thomas; Mount, Andrew; Rittschof, Dan; Clare, Anthony S

    2013-06-01

    Biological adhesives are materials of particular interest in the fields of bio-inspired technology and antifouling research. The adhesive of adult barnacles has received much attention over the years; however, the permanent adhesive of the cyprid - the colonisation stage of barnacles - is a material about which very little is presently known. We applied confocal laser-scanning microscopy to the measurement of contact angles between the permanent adhesive of barnacle cyprid larvae and self-assembled monolayers of OH- and CH3-terminated thiols. Measurement of contact angles between actual bioadhesives and surfaces has never previously been achieved and the data may provide insight into the physicochemical properties and mechanism of action of these functional materials. The adhesive is a dual-phase system post-secretion, with the behaviour of the components governed separately by the surface chemistry. The findings imply that the cyprid permanent adhesion process is more complex than previously thought, necessitating broad re-evaluation of the system. Improved understanding will have significant implications for the production of barnacle-resistant coatings as well as development of bio-inspired glues for niche applications.

  6. Pycnogenol prevents peritoneal adhesions.

    Science.gov (United States)

    Sahbaz, Ahmet; Aynioglu, Oner; Isik, Hatice; Gun, Banu Dogan; Cengil, Osman; Erol, Onur

    2015-12-01

    This study tested the ability of pycnogenol, an extract from the bark of the French maritime pine (Pinus pinaster), to prevent intra-abdominal adhesions. Thirty female Wistar albino rats were separated randomly into three equal groups: Group (1) the control group, which underwent surgery, but was given no drug; Group (2) given 10 mg/kg of pycnogenol dissolved in normal saline intraperitoneally for 10 days after surgery; and Group (3) given 0.1 mL of normal saline for 10 days intraperitoneally after surgery. On post-operative day 10, all of the animals were killed and any adhesions were evaluated macroscopically and histopathologically. The macroscopic adhesion scores (mean ± SD) for Groups 1, 2, and 3 were 2.5 ± 0.53, 0.60 ± 0.70, and 2.0 ± 0.82, respectively. The macroscopic adhesion score was significantly lower in Group 2 than in Groups 1 and 3 (p Pycnogenol was found to be effective at preventing surgery-related adhesions in an animal model.

  7. Spiders avoid sticking to their webs: clever leg movements, branched drip-tip setae, and anti-adhesive surfaces

    Science.gov (United States)

    Briceño, R. D.; Eberhard, W. G.

    2012-04-01

    Orb-weaving spiders construct webs with adhesive silk but are not trapped by it. Previous studies have attributed this defense to an oily coating on their legs that protects against adhesion or, more recently, to behavioral avoidance of sticky lines. The old evidence is very weak, however, and the behavioral avoidance explanation is inadequate because orb-weavers push with their hind legs against sticky lines hundreds or thousands of times during construction of each orb and are not trapped. Video analyses of behavior and experimental observations of isolated legs pulling away from contact with sticky lines showed that the spider uses three anti-adhesion traits: dense arrays of branched setae on the legs that reduce the area of contact with adhesive material; careful engagement and withdrawal movements of its legs that minimize contact with the adhesive and that avoid pulling against the line itself; and a chemical coating or surface layer that reduces adhesion.

  8. Cell-matrix adhesion.

    Science.gov (United States)

    Berrier, Allison L; Yamada, Kenneth M

    2007-12-01

    The complex interactions of cells with extracellular matrix (ECM) play crucial roles in mediating and regulating many processes, including cell adhesion, migration, and signaling during morphogenesis, tissue homeostasis, wound healing, and tumorigenesis. Many of these interactions involve transmembrane integrin receptors. Integrins cluster in specific cell-matrix adhesions to provide dynamic links between extracellular and intracellular environments by bi-directional signaling and by organizing the ECM and intracellular cytoskeletal and signaling molecules. This mini review discusses these interconnections, including the roles of matrix properties such as composition, three-dimensionality, and porosity, the bi-directional functions of cellular contractility and matrix rigidity, and cell signaling. The review concludes by speculating on the application of this knowledge of cell-matrix interactions in the formation of cell adhesions, assembly of matrix, migration, and tumorigenesis to potential future therapeutic approaches. 2007 Wiley-Liss, Inc.

  9. Measurement and improvement of the adhesion of copper to polyimide

    Energy Technology Data Exchange (ETDEWEB)

    Menezes, M. [Department of Materials Science and Engineering and Materials Research Laboratory, University of Illinois, Urbana, Illinois (United States); Robertson, I. M. [Department of Materials Science and Engineering and Materials Research Laboratory, University of Illinois, Urbana, Illinois (United States); Birnbaum, H. K. [Department of Materials Science and Engineering and Materials Research Laboratory, University of Illinois, Urbana, Illinois (United States)

    1999-10-01

    A contact angle measurement technique has been used to obtain an estimate of the interfacial energy and thermodynamic adhesive strength between copper and polyimide [pyromellitic dyanhydride oxydianalyn (PMDA-ODA) and p-phenylene biphenylteracarboinide (BPDA-PDA)]. Values of the strength of adhesion from these contact angle measurements are in reasonable agreement with values calculated using the Girifalco-Good-Fowkes nonpolar interfacial adhesion theory. Based on the surface energy it was predicted and experimentally observed that small copper clusters would embed into the polymer matrix if heated under ultrahigh vacuum conditions at temperatures near T{sub g} of the polymer. Controlled embedding of nanometer clusters was utilized to produce a textured interface, where the partially embedded clusters acted as ''nanonails'' to anchor a metal overlayer to the underlying polyimide substrate. These nanonails greatly increased the bonding between the copper overlayer and the polyimide, as demonstrated by mechanical debonding studies. (c) 1999 Materials Research Society.

  10. Adhesion Dynamics in Probing Micro- and Nanoscale Thin Solid Films

    Directory of Open Access Journals (Sweden)

    Xiaoling He

    2008-01-01

    Full Text Available This study focuses on modeling the probe dynamics in scratching and indenting thin solid films at micro- and nanoscales. The model identifies bifurcation conditions that define the stick-slip oscillation patterns of the tip. It is found that the local energy fluctuations as a function of the inelastic deformation, defect formation, material properties, and contact parameters determine the oscillation behavior. The transient variation of the localized function makes the response nonlinear at the adhesion junction. By quantifying the relation between the bifurcation parameters and the oscillation behavior, this model gives a realistic representation of the complex adhesion dynamics. Specifically, the model establishes the link between the stick-slip behavior and the inelastic deformation and the local potentials. This model justifies the experimental observations and the molecular dynamics simulation of the adhesion and friction dynamics in both the micro- and nanoscale contact.

  11. The Surface adhesion parameter: A measure for wafer bondability

    NARCIS (Netherlands)

    Gui, C.; Elwenspoek, Michael Curt; Tas, Niels Roelof; Gardeniers, Johannes G.E.

    1999-01-01

    A theory is presented which describes the initial direct wafer bonding process. The effect of surface microroughness on the bondability is studied on the basis of the theory of contact and adhesion of elastic solids. An effective bonding energy, the maximum of which is the specific surface energy of

  12. An Internally Heated Shape Memory Polymer Dry Adhesive

    Directory of Open Access Journals (Sweden)

    Jeffrey Eisenhaure

    2014-08-01

    Full Text Available A conductive epoxy-based shape memory polymer (SMP is demonstrated using carbon black (CB as a dopant for the purpose of creating an SMP dry adhesive system which can internally generate the heat required for activation. The electrical and mechanical properties of the CB/SMP blends for varying dopant concentrations are characterized. A composite adhesive is created to minimize surface contact resistance to conductive tape acting as electrodes, while maintaining bulk resistivity required for heat generation due to current flow. The final adhesive can function on flat or curved surfaces. As a demonstration, a 25 mm wide by 45 mm long dry adhesive strip is shown to heat evenly from an applied voltage, and can easily hold a mass in excess of 6 kg when bonded to a spherical concave glass surface using light pressure at 75 °C.

  13. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... with Colored Contact Lenses Julian: Teenager Blinded In One Eye By Non-Prescription Contact Lens Laura: Vision ... Robyn: Blurry Vision and Daily Eye Drops After One Use Facts About Colored Contacts and Halloween Safety ...

  14. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... People, Real Problems with Colored Contact Lenses Julian: Teenager Blinded In One Eye By Non-Prescription Contact ... colored contact lenses , from the U.S. Food and Drug Administration (FDA). Are the colored lenses you are ...

  15. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Purchase the colored contact lenses from an eye product retailer who asks for a prescription. Follow the contact lens care directions for cleaning, disinfecting, and wearing the lenses. Never share contact ...

  16. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... One Use Facts About Colored Contacts and Halloween Safety Colored Contact Lens Facts Over-the-Counter Costume ... use of colored contact lenses , from the U.S. Food and Drug Administration (FDA). Are the colored lenses ...

  17. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... One Use Facts About Colored Contacts and Halloween Safety Colored Contact Lens Facts Over-the-Counter Costume ... Costume Contact Lenses Can Ruin Vision Eye Makeup Safety In fact, it is illegal to sell colored ...

  18. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Vision and Daily Eye Drops After One Use Facts About Colored Contacts and Halloween Safety Colored Contact Lens Facts Over-the-Counter Costume Contacts May Contain Chemicals ...

  19. A gecko-inspired double-sided adhesive.

    Science.gov (United States)

    Wang, Zhengzhi; Gu, Ping; Wu, Xiaoping

    2013-12-21

    Geckos' outstanding abilities to adhere to various surfaces are widely credited to the large actual contact areas of the fibrillar and hierarchical structures on their feet. These special features regulate the essential structural compliance for every attachment and thus provide robust yet reversible adhesions. Inspired by gecko's feet and our commonly used double-faced tape, we have successfully fabricated a gecko-inspired double-sided dry adhesive by using porous anodic alumina template assisted nano-wetting on a stiff polymer. It was determined that the obtained 2-sided structure showed largely decreased effective stiffness compared with its 1-sided counterpart, which favored better compliance and interfacial integrity. We also demonstrated that the repeatable double-sided adhesive improved the macroscopic normal and shear adhesion capacities over the widely-studied 1-side structure by ~50% and ~85%, respectively. By using the synthetic double-sided adhesive, the usage of traditional pressure-sensitive/chemical adhesives could be well avoided. Besides, the double-sided nanostructures showed great potential in finding new interesting properties and practical applications for the synthetic dry adhesives.

  20. Switchable Adhesion in Vacuum Using Bio-Inspired Dry Adhesives.

    Science.gov (United States)

    Purtov, Julia; Frensemeier, Mareike; Kroner, Elmar

    2015-11-04

    Suction based attachment systems for pick and place handling of fragile objects like glass plates or optical lenses are energy-consuming and noisy and fail at reduced air pressure, which is essential, e.g., in chemical and physical vapor deposition processes. Recently, an alternative approach toward reversible adhesion of sensitive objects based on bioinspired dry adhesive structures has emerged. There, the switching in adhesion is achieved by a reversible buckling of adhesive pillar structures. In this study, we demonstrate that these adhesives are capable of switching adhesion not only in ambient air conditions but also in vacuum. Our bioinspired patterned adhesive with an area of 1 cm(2) provided an adhesion force of 2.6 N ± 0.2 N in air, which was reduced to 1.9 N ± 0.2 N if measured in vacuum. Detachment was induced by buckling of the structures due to a high compressive preload and occurred, independent of air pressure, at approximately 0.9 N ± 0.1 N. The switch in adhesion was observed at a compressive preload between 5.6 and 6.0 N and was independent of air pressure. The difference between maximum adhesion force and adhesion force after buckling gives a reasonable window of operation for pick and place processes. High reversibility of the switching behavior is shown over 50 cycles in air and in vacuum, making the bioinspired switchable adhesive applicable for handling operations of fragile objects.

  1. A microfabricated wedge-shaped adhesive array displaying gecko-like dynamic adhesion, directionality and long lifetime.

    Science.gov (United States)

    Parness, Aaron; Soto, Daniel; Esparza, Noé; Gravish, Nick; Wilkinson, Matt; Autumn, Kellar; Cutkosky, Mark

    2009-12-06

    Gecko adhesion has become a paradigmatic example of bio-inspired engineering, yet among the many gecko-like synthetic adhesives (GSAs), truly gecko-like performance remains elusive. Many GSAs have previously demonstrated one or two features of the gecko adhesive. We present a new wedge-shaped GSA that exhibits several gecko-like properties simultaneously: directional features; zero force at detachment; high ratio of detachment force to preload force; non-adhesive default state; and the ability to maintain performance while sliding, even after thousands of cycles. Individual wedges independently detach and reattach during sliding, resulting in high levels of shear and normal adhesion during drag. This behaviour provides a non-catastrophic failure mechanism that is desirable for applications such as climbing robots where sudden contact failure would result in serious falls. The effects of scaling patch sizes up to tens of square centimetres are also presented and discussed. Patches of 1 cm(2) had an adhesive pressure of 5.1 kPa while simultaneously supporting 17.0 kPa of shear. After 30 000 attachment/detachment cycles, a patch retained 67 per cent of its initial adhesion and 76 per cent of its initial shear without cleaning. Square-based wedges of 20 mum and 50 mum are manufactured in a moulding process where moulds are fabricated using a dual-side, dual-angle lithography process on quartz wafers with SU-8 photoresist as the mould material and polydimethylsiloxane as the cast material.

  2. Wood Composite Adhesives

    Science.gov (United States)

    Gomez-Bueso, Jose; Haupt, Robert

    The global environment, in which phenolic resins are being used for wood composite manufacture, has changed significantly during the last decade. This chapter reviews trends that are driving the use and consumption of phenolic resins around the world. The review begins with recent data on volume usage and regional trends, followed by an analysis of factors affecting global markets. In a section on environmental factors, the impact of recent formaldehyde emission regulations is discussed. The section on economics introduces wood composite production as it relates to the available adhesive systems, with special emphasis on the technical requirement to improve phenolic reactivity. Advances in composite process technology are introduced, especially in regard to the increased demands the improvements place upon adhesive system performance. The specific requirements for the various wood composite families are considered in the context of adhesive performance needs. The results of research into current chemistries are discussed, with a review of recent findings regarding the mechanisms of phenolic condensation and acceleration. Also, the work regarding alternate natural materials, such as carbohydrates, lignins, tannins, and proteinaceous materials, is presented. Finally, new developments in alternative adhesive technologies are reported.

  3. Adhesive tape exfoliation

    DEFF Research Database (Denmark)

    Bohr, Jakob

    2015-01-01

    Single-crystal graphite can be cleaved by the use of an adhesive tape. This was also the initial route for obtaining graphene, a one-layer thick graphite slab. In this letter a few simple and fun considerations are presented in an attempt to shed some light on why this procedure is successful...

  4. Time-dependent contact behavior between diamond and a CNT turf

    Energy Technology Data Exchange (ETDEWEB)

    Qiu, A; Bahr, D F [School of Mechanical and Materials Engineering, Washington State University, 99164-2920 WA (United States); Fowler, S P; Jiao, J [Department of Physics, Portland State University, Portland, 97207-0751 OR (United States); Kiener, D, E-mail: anqi_qiu@wsu.edu, E-mail: dbahr@wsu.edu [Department of Materials Physics, University of Leoben, A-8700 Leoben (Austria)

    2011-07-22

    The elastic and adhesive properties of nominally vertically aligned carbon nanotube (CNT) turfs have been measured using nanoindentation. The perceived stiffness of a CNT turf is dependent on the unloading rate, which decreases at slower unloading rates. Depth-controlled nanoindentation was used to examine adhesion effects. Adhesive loads between the turf and the probe tip increased as the time the tip is in contact with the turf increased. As these effects could be from either more tubes coming into contact with the tip due to relaxation and motion of CNTs relative to one another or each tube in contact increasing its adhesive behavior and sub-contact stiffness due to tube-tube interactions within the turf, electrical resistance measurements during nanoindentation were carried out. When the tip is held at a fixed nominal depth, the current remains constant while the contact load decreases, suggesting the number of tubes in contact with the tip stays constant with time while the relaxation mechanisms in the turf occur at positions lower than the contact surface. These observations, in conjunction with in situ TEM compression test of CNT arrays, are used to describe the relative effects the various length and time scales may have on the perceived properties measured during experiments, including elastic modulus and adhesion for gecko-like dry adhesives.

  5. Time-dependent contact behavior between diamond and a CNT turf

    Science.gov (United States)

    Qiu, A.; Fowler, S. P.; Jiao, J.; Kiener, D.; Bahr, D. F.

    2011-07-01

    The elastic and adhesive properties of nominally vertically aligned carbon nanotube (CNT) turfs have been measured using nanoindentation. The perceived stiffness of a CNT turf is dependent on the unloading rate, which decreases at slower unloading rates. Depth-controlled nanoindentation was used to examine adhesion effects. Adhesive loads between the turf and the probe tip increased as the time the tip is in contact with the turf increased. As these effects could be from either more tubes coming into contact with the tip due to relaxation and motion of CNTs relative to one another or each tube in contact increasing its adhesive behavior and sub-contact stiffness due to tube-tube interactions within the turf, electrical resistance measurements during nanoindentation were carried out. When the tip is held at a fixed nominal depth, the current remains constant while the contact load decreases, suggesting the number of tubes in contact with the tip stays constant with time while the relaxation mechanisms in the turf occur at positions lower than the contact surface. These observations, in conjunction with in situ TEM compression test of CNT arrays, are used to describe the relative effects the various length and time scales may have on the perceived properties measured during experiments, including elastic modulus and adhesion for gecko-like dry adhesives.

  6. Consequences of water between two hydrophobic surfaces on adhesion and wetting.

    Science.gov (United States)

    Defante, Adrian P; Burai, Tarak N; Becker, Matthew L; Dhinojwala, Ali

    2015-03-03

    The contact of two hydrophobic surfaces in water is of importance in biology, catalysis, material science, and geology. A tenet of hydrophobic attraction is the release of an ordered water layer, leading to a dry contact between two hydrophobic surfaces. Although the water-free contact has been inferred from numerous experimental and theoretical studies, this has not been directly measured. Here, we use surface sensitive sum frequency generation spectroscopy to directly probe the contact interface between hydrophobic poly(dimethylsiloxane) (PDMS) and two hydrophobic surfaces (a self-assembled monolayer, OTS, and a polymer coating, PVNODC). We show that the interfacial structures for OTS and PVNODC are identical in dry contact but that they differ dramatically in wet contact. In water, the PVNODC surface partially rearranges at grain boundaries, trapping water at the contact interface leading to a 50% reduction in adhesion energy compared to OTS-PDMS contact. The Young-Dupré equation, used extensively to calculate the thermodynamic work of adhesion, predicts no differences between the adhesion energy for these two hydrophobic surfaces, indicating a failure of this well-known equation when there is a heterogeneous contact. This study exemplifies the importance of interstitial water in controlling adhesion and wetting.

  7. Protein kinase C, focal adhesions and the regulation of cell migration

    DEFF Research Database (Denmark)

    Fogh, Betina S; Multhaupt, Hinke A B; Couchman, John Robert

    2014-01-01

    and adhesion turnover. Focal adhesions, or focal contacts, are widespread organelles at the cell-matrix interface. They arise as a result of receptor interactions with matrix ligands, together with clustering. Recent analysis shows that focal adhesions contain a very large number of protein components...... in their intracellular compartment. Among these are tyrosine kinases, which have received a great deal of attention, whereas the serine/threonine kinase protein kinase C has received much less. Here the status of protein kinase C in focal adhesions and cell migration is reviewed, together with discussion of its roles...

  8. Pathogenesis of postoperative adhesion formation

    NARCIS (Netherlands)

    Hellebrekers, B.W.J.; Kooistra, T.

    2011-01-01

    Background: Current views on the pathogenesis of adhesion formation are based on the "classical concept of adhesion formation", namely that a reduction in peritoneal fibrinolytic activity following peritoneal trauma is of key importance in adhesion development. Methods: A non-systematic literature

  9. Adhesive bonding of wood materials

    Science.gov (United States)

    Charles B. Vick

    1999-01-01

    Adhesive bonding of wood components has played an essential role in the development and growth of the forest products industry and has been a key factor in the efficient utilization of our timber resource. The largest use of adhesives is in the construction industry. By far, the largest amounts of adhesives are used to manufacture building materials, such as plywood,...

  10. Adhesion Casting In Low Gravity

    Science.gov (United States)

    Noever, David A.; Cronise, Raymond J.

    1996-01-01

    Adhesion casting in low gravity proposed as technique for making new and improved materials. Advantages of low-gravity adhesion casting, in comparison with adhesion casting in normal Earth gravity, comes from better control over, and greater uniformity of, thicknesses of liquid films that form on and adhere to solid surfaces during casting.

  11. Contact lenses following keratoplasty.

    Science.gov (United States)

    Beekhuis, W H; van Rij, G; Eggink, F A; Vreugdenhil, W; Schoevaart, C E

    1991-01-01

    Bandage contact lenses can be used following keratoplasty to protect the ocular surface and promote epithelial healing. Rigid gas permeable contact lenses are indicated to correct irregular astigmatism and anisometropia. The Rotterdam Eye Hospital fit 77 keratoplasty patients with contact lenses following their surgery. The methods of fitting contact lenses over the irregular or highly astigmatic surface of a graft are discussed.

  12. Humidity Dependence of Adhesion for Silane Coated Microcantilevers

    Energy Technology Data Exchange (ETDEWEB)

    DE BOER,MAARTEN P.; MAYER,THOMAS M.; CARPICK,ROBERT W.; MICHALSKE,TERRY A.; SRINIVASAN,U.; MABOUDIAN,R.

    1999-11-09

    This study examines adhesion between silane-coated micromachined surfaces that are exposed to humid conditions. Our quantitative values for interfacial adhesion energies are determined from an in-situ optical measurement of deformations in partly-adhered cantilever beams. We coated micromachined cantilevers with either ODTS (C{sub 18}H{sub 37}SiCl{sub 3}) or FDTS (C{sub 8}F{sub 17}C{sub 2}H{sub 4}SiCl{sub 3}) with the objective of creating hydrophobic surfaces whose adhesion would be independent of humidity. In both cases, the adhesion energy is significantly lower than for uncoated, hydrophilic surfaces. For relative humidities (RH) less than 95% (ODTS) and 80% (FDTS) the adhesion energy was extremely low and constant. In fact, ODTS-coated beams exposed to saturated humidity conditions and long (48 hour) exposures showed only a factor of two increase in adhesion energy. Surprisingly, FDTS coated beams, which initially have a higher contact angle (115{degree}) with water than do ODTS coated beams (112{degree}), proved to be much more sensitive to humidity. The FDTS coated surfaces showed a factor of one hundred increase in adhesion energy after a seven hour exposure to 90% RH. Atomic force microscopy revealed agglomerated coating material after exposed to high RH, suggesting a redistribution of the monolayer film. This agglomeration was more prominent for FDTS than ODTS. These findings suggest a new mechanism for uptake of moisture under high humidity conditions. At high humidities, the silane coatings can reconfigure from a surface to a bulk phase leaving behind locally hydrophilic sites which increase the average measured adhesion energy. In order for the adhesion increase to be observed, a significant fraction of the monolayer must be converted from the surface to the bulk phase.

  13. Quantitative comparison of cancer and normal cell adhesion using organosilane monolayer templates: an experimental study on the anti-adhesion effect of green-tea catechins.

    Science.gov (United States)

    Sakamoto, Rumi; Kakinuma, Eisuke; Masuda, Kentaro; Takeuchi, Yuko; Ito, Kosaku; Iketaki, Kentaro; Matsuzaki, Takahisa; Nakabayashi, Seiichiro; Yoshikawa, Hiroshi Y; Yamamoto, Hideaki; Sato, Yuko; Tanii, Takashi

    2016-09-01

    The main constituent of green tea, (-)-Epigallocatechin-3-O-gallate (EGCG), is known to have cancer-specific chemopreventive effects. In the present work, we investigated how EGCG suppresses cell adhesion by comparing the adhesion of human pancreatic cancer cells (AsPC-1 and BxPC-3) and their counterpart, normal human embryonic pancreas-derived cells (1C3D3), in catechin-containing media using organosilane monolayer templates (OMTs). The purpose of this work is (1) to evaluate the quantitativeness in the measurement of cell adhesion with the OMT and (2) to show how green-tea catechins suppress cell adhesion in a cancer-specific manner. For the first purpose, the adhesion of cancer and normal cells was compared using the OMT. The cell adhesion in different type of catechins such as EGCG, (-)-Epicatechin-3-O-gallate (ECG) and (-)-Epicatechin (EC) was also evaluated. The measurements revealed that the anti-adhesion effect of green-tea catechins is cancer-specific, and the order is EGCG≫ECG>EC. The results agree well with the data reported to date, showing the quantitativeness of the new method. For the second purpose, the contact area of cells on the OMT was measured by reflection interference contrast microscopy. The cell-OMT contact area of cancer cells decreases with increasing EGCG concentration, whereas that of normal cells remains constant. The results reveal a twofold action of EGCG on cancer cell adhesion-suppressing cell attachment to a candidate adhesion site and decreasing the contact area of the cells-and validates the use of OMT as a tool for screening cancer cell adhesion.

  14. Investigating the lubricity and electrical insulation caused by sanding in dry wheel–rail contacts

    NARCIS (Netherlands)

    Arias-Cuevas, O.; Li, Z.; Lewis, R.

    2009-01-01

    The adhesion (or available friction) in the wheel–rail contact is the most important parameter for the braking and traction operation of rail vehicles. Since the beginning of railway transportation, sanding from the locomotive has been a common practice to enhance the wheel–rail adhesion. In recent

  15. Effects of Flame Treatment in the Interfacial Energy of Polyethylene Assessed by Contact Mechanics

    NARCIS (Netherlands)

    Song, Jing; Vancso, Gyula J.

    2008-01-01

    The effects of flame treatment of low-density polyethylene (LDPE) on the work of adhesion (W) and energy release rate (G) were assessed by a custom-built adhesion testing device (ATD). The contact area and the vertical displacement between planar LDPE films and PDMS lenses (untreated and UV/ozone

  16. Acid-Base Interactions at the Molecular Level: Adhesion and Friction Studies with Interfacial Force Microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Burns, A.R.; Carpick, R.W.; Houston, J.E.; Michalske, T.A.

    1998-12-09

    To examine the forces of acid-base adhesive interactions at the molecular level, we utilize the scanning probe Interracial Force Microscope (IFM). Unlike cantilever-based atomic force microscopes, the EM is a non-compliant, mechanically stable probe that provides a complete adhesive profile without jump-to-contact. In this way, we are able to quantitatively measure the work of adhesion and bond energies at well-defined, nanometer-scale single asperity contacts. In particular, we will discuss the displacement-controlled adhesive forces between self-assembled monolayer of functionalized alkanethiols strongly bound to a gold substrate and a similarly functionalized tip. We also discuss a method utilizing decoupled lateral and normal force sensors to simultaneously observe the onset of both friction and chemical bond formation. Measurements show that friction can be directly attributed to bond formation and rupture well before repulsive contact.

  17. Harnessing tunable scanning probe techniques to measure shear enhanced adhesion of gecko-inspired fibrillar arrays.

    Science.gov (United States)

    Li, Yasong; Zhou, James H-W; Zhang, Cheng; Menon, Carlo; Gates, Byron D

    2015-02-04

    The hierarchical arrays of mesoscale to nanoscale fibrillar structures on a gecko's foot enable the animal to climb surfaces of varying roughness. Adhesion force between the fibrillar structures and various surfaces is maximized after the gecko drags its foot in one direction, which has also been demonstrated to improve the adhesion forces of artificial fibrillar arrays. Essential conditions that influence the magnitude of these interactions include the lateral distance traveled and velocity between the contacting surfaces, as well as the velocity at which the two surfaces are subsequently separated. These parameters have, however, not been systematically investigated to assess the adhesion properties of artificial adhesives. We introduce a systematic study that investigates these conditions using a scanning probe microscope to measure the adhesion forces of artificial adhesives through a process that mimics the mechanism by which a gecko climbs. The measured adhesion response was different for arrays of shorter and longer fibrils. These results from 9000 independent measurements also provide further insight into the dynamics of the interactions between fibrillar arrays and contacting surfaces. These studies establish scanning probe microscopy techniques as a versatile approach for measuring a variety of adhesion properties of artificial fibrillar adhesives.

  18. Mechanics ofadhesion and contact self-cleaning of bio-inspired microfiberadhesives

    Science.gov (United States)

    Abusomwan, Uyiosa Anthony

    The remarkable attachment system of geckos has inspired the development of dry microfiber adhesives through the last two decades. Some of the notable characteristics of gecko-inspired fibrillar adhesives include: strong, directional, and controllable adhesion to smooth and rough surfaces in air, vacuum, and under water; ability to maintain strong adhesion during repeated use; anti-fouling and self-cleaning after contamination. Given these outstanding qualities, fibrillar adhesives promise an extensive range of use in industrial, robotic, manufacturing, medical, and consumer products. Significant advancements have been made in the design of geckoinspired microfiber adhesives with the characteristic properties listed above, with the exception of the anti-fouling and self-cleaning features. The self-cleaning mechanism of the gecko's adhesion system plays an important role to its ability to remain sticky in various environments. Similarly, enabling self-cleaning capability for synthetic microfiber adhesives will lead to robust performance in various areas of application. Presently, the practical use of fibrillar adhesives is restricted mainly to clean environments, where they are free from contaminants. The goal of this thesis is to conduct a detailed study of the mechanisms and mechanics of contact-based self-cleaning of gecko-inspired microfiber adhesives. This work focuses on contact self-cleaning mechanisms, as a more practical approach to cleaning. Previous studies on the cleaning of microfiber adhesives have mostly focused on mechanisms that involve complete removal of the contaminants from the adhesive. In this thesis, a second cleaning process is proposed whereby particles are removed from the tip of the microfibers and embedded between adjacent microfibers or in grooves patterned onto the adhesive, where they are no longer detrimental to the performance of the adhesive. In this work, a model of adhesion for microfiber adhesives that take the deformation of the

  19. Work of adhesion of dairy products on stainless steel surface

    Directory of Open Access Journals (Sweden)

    Patrícia Campos Bernardes

    2012-12-01

    Full Text Available The adhesion of the solids presents in food can difficult the process of surface cleaning and promotes the bacterial adhesion process and can trigger health problems. In our study, we used UHT whole milk, chocolate based milk and infant formula to evaluate the adhesion of Enterobacter sakazakii on stainless steel coupons, and we determine the work of adhesion by measuring the contact angle as well as measured the interfacial tension of the samples. Inaddition we evaluated the hydrophobicity of stainless steel after pre-conditioning with milk samples mentioned. E. sakazakii was able to adhere to stainless steel in large numbers in the presence of dairy products. The chocolate based milk obtained the lower contact angle with stainless steel surface, higher interfacial tension and consequently higher adhesion work. It was verified a tendency of decreasing the interfacial tension as a function of the increasing of protein content. The pre-conditioning of the stainless steel coupons with milk samples changed the hydrophobic characteristics of the surfaces and became them hydrophilic. Therefore, variations in the composition of the milk products affect parameters important that can influence the procedure of hygiene in surface used in food industry.

  20. Vertical anisotropic microfibers for a gecko-inspired adhesive.

    Science.gov (United States)

    Tamelier, John; Chary, Sathya; Turner, Kimberly L

    2012-06-12

    Geckos are able to adhere strongly and release easily from surfaces because the structurally anisotropic fibers on their toes naturally exhibit force anisotropy based on the direction of articulation. Here, semicircular fibers, with varying amounts of contact area on the two faces, are investigated to ascertain whether fiber shape can be used to gain anisotropy in shear and shear adhesion forces. Testing of 10-μm-diameter polydimethylsiloxane (PDMS) fibers against a 4-mm-diameter flat glass puck show that shear and shear adhesion forces were two to five times greater when in-plane movement caused the flat face, rather than the curved face, of the fiber to come in contact with the glass puck. The directional adhesion and shear force anisotropy results are close to theoretical approximations using the Kendall peel model and clearly demonstrate how fiber shape may be used to influence the properties of the adhesive. This result has broad applicability, and by combining the results shown here with other current vertical and angled designs, synthetic adhesives can be further improved to behave more like their natural counterparts.

  1. [Correct contact lens hygiene].

    Science.gov (United States)

    Blümle, S; Kaercher, T; Khaireddin, R

    2013-06-01

    Although contact lenses have long been established in ophthalmology, practical aspects of handling contact lenses is becoming increasingly less important in the clinical training as specialist for ophthalmology. Simultaneously, for many reasons injuries due to wearing contact lenses are increasing. In order to correct this discrepancy, information on contact lenses and practical experience with them must be substantially increased from a medical perspective. This review article deals with the most important aspects for prevention of complications, i.e. contact lens hygiene.

  2. Adhesion and friction force coupling of gecko setal arrays: implications for structured adhesive surfaces.

    Science.gov (United States)

    Zhao, Boxin; Pesika, Noshir; Rosenberg, Kenny; Tian, Yu; Zeng, Hongbo; McGuiggan, Patricia; Autumn, Kellar; Israelachvili, Jacob

    2008-02-19

    The extraordinary climbing ability of geckos is partially attributed to the fine structure of their toe pads, which contain arrays consisting of thousands of micrometer-sized stalks (setae) that are in turn terminated by millions of fingerlike pads (spatulae) having nanoscale dimensions. Using a surface forces apparatus (SFA), we have investigated the dynamic sliding characteristics of setal arrays subjected to various loading, unloading, and shearing conditions at different angles. Setal arrays were glued onto silica substrates and, once installed into the SFA, brought toward a polymeric substrate surface and then sheared. Lateral shearing of the arrays was initiated along both the "gripping" and "releasing" directions of the setae on the foot pads. We find that the anisotropic microstructure of the setal arrays gives rise to quite different adhesive and tribological properties when sliding along these two directions, depending also on the angle that the setae subtend with respect to the surface. Thus, dragging the setal arrays along the gripping direction leads to strong adhesion and friction forces (as required during contact and attachment), whereas when shearing along the releasing direction, both forces fall to almost zero (as desired during rapid detachment). The results and analysis provide new insights into the biomechanics of adhesion and friction forces in animals, the coupling between these two forces, and the specialized structures that allow them to optimize these forces along different directions during movement. Our results also have practical implications and criteria for designing reversible and responsive adhesives and articulated robotic mechanisms.

  3. Management of adhesive capsulitis

    Directory of Open Access Journals (Sweden)

    Stupay KL

    2015-08-01

    Full Text Available Kristen L Stupay,1 Andrew S Neviaser2 1Tulane University School of Medicine, New Orleans, LA, USA; 2George Washington University Medical Faculty Associates, Washington, DC, USA Abstract: Adhesive capsulitis of the shoulder is a condition of capsular contracture that reduces both active and passive glenohumeral motion. The cause of adhesive capsulitis is not known but it is strongly associated with endocrine abnormalities such as diabetes. Diverse terminology and the absence of definitive criteria for diagnosis make evaluating treatment modalities difficult. Many treatment methods have been reported, most with some success, but few have been proved to alter the natural course of this disease. Most afflicted patients will achieve acceptable shoulder function without surgery. Those who remain debilitated after 8–12 months are reasonable candidates for invasive treatments. Here, the various treatment methods and the data to support their use are reviewed. Keywords: frozen shoulder, stiff shoulder, periarthritis, painful shoulder 

  4. Contact Sensitization to Allergens in Nail Cosmetics.

    Science.gov (United States)

    Chou, Margaret; Dhingra, Nikhil; Strugar, Tamara Lazic

    Ingredients found in the nail cosmetic industry, including but not limited to methacrylate and acrylate monomers, formaldehyde, and toluene sulfonamide-formaldehyde resin, can incite allergic contact dermatitis. An eczematous outbreak presents on areas surrounding the nail plate and may spread through contact transfer of the allergen, commonly to the face and neck. Even components that were originally deemed nonsensitizing, such as the ubiquitous cyanoacrylate adhesive family, have been found to be allergenic. They do not, however, cross-react with methacrylates and acrylates. Alternative options for individuals with allergic contact dermatitis reactions to these ingredients can be avoidance of these procedures or use of products that are "3, 4, 5 free" in which the common allergens dibutyl phthalate, toluene, and formaldehyde are absent. In cases where strengthening of the nail is the sole purpose, nail wraps or preformed nails can be applied for non-cyanoacrylate-sensitive individuals.

  5. Adhesion between cerebroside bilayers.

    Science.gov (United States)

    Kulkarni, K; Snyder, D S; McIntosh, T J

    1999-11-16

    The structure, hydration properties, and adhesion energy of the membrane glycolipid galactosylceramide (GalCer) were studied by osmotic stress/X-ray diffraction analysis.(1) Fully hydrated GalCer gave a repeat period of 67 A, which decreased less than 2 A with application of applied osmotic pressures as large as 1.6 x 10(9) dyn/cm(2). These results, along with the invariance of GalCer structure obtained by a Fourier analysis of the X-ray data, indicated that there was an extremely narrow fluid space (less than the diameter of a single water molecule) between fully hydrated cerebroside bilayers. Electron density profiles showed that the hydrocarbon chains from apposing GalCer monolayers partially interdigitated in the center of the bilayer. To obtain information on the adhesive properties of GalCer bilayers, we incorporated into the bilayer various mole ratios of the negatively charged lipid dipalmitoylphosphatidylglycerol (DPPG) to provide known electrostatic repulsion between the bilayers. Although 17 and 20 mol % DPPG swelled (disjoined) the GalCer bilayers by an amount predictable from electrostatic double-layer theory, 5, 10, 13, and 15 mol % DPPG did not disjoin the bilayers. By calculating the magnitude of the electrostatic pressure necessary to disjoin the bilayers, we estimated the adhesion energy for GalCer bilayers to be about -1.5 erg/cm(2), a much larger value than that previously measured for phosphatidylcholine bilayers. The observed discontinuous disjoining with increased electrostatic pressure and this relatively large value for adhesion energy indicated the presence of an attractive interaction, in addition to van der Waals attraction, between cerebroside bilayers. Possible attractive interactions are hydrogen bond formation and hydrophobic interactions between the galactose headgroups of apposing GalCer bilayers.

  6. Syndecans and cell adhesion

    DEFF Research Database (Denmark)

    Couchman, J R; Chen, L; Woods, A

    2001-01-01

    Now that transmembrane signaling through primary cell-matrix receptors, integrins, is being elucidated, attention is turning to how integrin-ligand interactions can be modulated. Syndecans are transmembrane proteoglycans implicated as coreceptors in a variety of physiological processes, including...... cell adhesion, migration, response to growth factors, development, and tumorigenesis. This review will describe this family of proteoglycans in terms of their structures and functions and their signaling in conjunction with integrins, and indicate areas for future research....

  7. Impact of the Metal Adhesion Layer on the Radiation Power of Plasmonic Photoconductive Terahertz Sources

    Science.gov (United States)

    Turan, Deniz; Corzo-Garcia, Sofia Carolina; Yardimci, Nezih Tolga; Castro-Camus, Enrique; Jarrahi, Mona

    2017-08-01

    The use of plasmonic contact electrodes in a photoconductive terahertz source offers high optical-to-terahertz conversion efficiencies. The high efficiency is because plasmonic contact electrodes concentrate a large portion of the incident optical pump beam in close proximity to the contact electrodes. By reducing the average transport path length of the photo-generated carriers from the contact electrodes, a larger number of the photocarriers drift to the terahertz radiating elements of the photoconductive source within a sub-picosecond time scale. Therefore, higher terahertz radiation power levels are achieved compared to a similar photoconductive source without plasmonic contact electrodes. Au is a preferred metal for plasmonic contact electrodes because of the strong plasmonic enhancement factors it offers at near-infrared optical wavelengths. However, it requires an adhesion layer to stick well to most III-V semiconductor substrates used in photoconductive terahertz sources. In this paper, we analyze the impact of the Au adhesion layer on the performance of plasmonic photoconductive sources fabricated on a GaAs substrate. Our analysis suggests that Cr is the most promising adhesion layer for plasmonic contact electrodes. We show that the use of a Cr adhesion layer instead of Ti, which is used in previously demonstrated plasmonic photoconductive sources, offers up to an 80% enhancement in the generated terahertz powers. We report record-high terahertz power emissions of up to 6.7 mW from plasmonic photoconductive sources with Cr/Au contacts.

  8. Impact of the Metal Adhesion Layer on the Radiation Power of Plasmonic Photoconductive Terahertz Sources

    Science.gov (United States)

    Turan, Deniz; Corzo-Garcia, Sofia Carolina; Yardimci, Nezih Tolga; Castro-Camus, Enrique; Jarrahi, Mona

    2017-12-01

    The use of plasmonic contact electrodes in a photoconductive terahertz source offers high optical-to-terahertz conversion efficiencies. The high efficiency is because plasmonic contact electrodes concentrate a large portion of the incident optical pump beam in close proximity to the contact electrodes. By reducing the average transport path length of the photo-generated carriers from the contact electrodes, a larger number of the photocarriers drift to the terahertz radiating elements of the photoconductive source within a sub-picosecond time scale. Therefore, higher terahertz radiation power levels are achieved compared to a similar photoconductive source without plasmonic contact electrodes. Au is a preferred metal for plasmonic contact electrodes because of the strong plasmonic enhancement factors it offers at near-infrared optical wavelengths. However, it requires an adhesion layer to stick well to most III-V semiconductor substrates used in photoconductive terahertz sources. In this paper, we analyze the impact of the Au adhesion layer on the performance of plasmonic photoconductive sources fabricated on a GaAs substrate. Our analysis suggests that Cr is the most promising adhesion layer for plasmonic contact electrodes. We show that the use of a Cr adhesion layer instead of Ti, which is used in previously demonstrated plasmonic photoconductive sources, offers up to an 80% enhancement in the generated terahertz powers. We report record-high terahertz power emissions of up to 6.7 mW from plasmonic photoconductive sources with Cr/Au contacts.

  9. Highly durable and unidirectionally stooped polymeric nanohairs for gecko-like dry adhesive

    Science.gov (United States)

    Im, Hyeon Seong; Kwon, Ki Yoon; Kim, Jong Uk; Kim, Kwang Su; Yi, Hoon; Yoo, Pil J.; Pang, Changhyun; Jeong, Hoon Eui; Kim, Tae-il

    2015-10-01

    Gecko-like dry adhesive using high aspect ratio polymeric nanohairs has insuperable limitations, although it has huge potential in many applications. Repeated harsh contacts on a target substrate lead to physical collapse of nanohairs and significant degradation of the adhesion property, because the polymeric nanohairs are quite fragile due to poor mechanical robustness. Herein, we demonstrate a highly robust gecko-like dry adhesive with unidirectionally stooped polymeric nanohairs (diameter 100 nm) with a high aspect ratio (∼9) using an ultrathin metal coating. 100 cycles of repeated adhesion tests with 1 N preloading force did not significantly degrade adhesion or cause collapse of nanohairs. We believe that this approach allows gecko-like dry adhesive to be utilized in many related applications and diverse industry interests.

  10. Biomimetic emulsions reveal the effect of homeostatic pressure on cell-cell adhesion

    CERN Document Server

    Pontani, Lea-Laetitia; Viasnoff, Virgile; Brujic, Jasna

    2012-01-01

    Cell-cell contacts in tissues are continuously subject to mechanical forces due to homeostatic pressure and active cytoskeleton dynamics. While much is known about the molecular pathways of adhesion, the role of mechanics is less well understood. To isolate the role of pressure we present a dense packing of functionalized emulsion droplets in which surface interactions are tuned to mimic those of real cells. By visualizing the microstructure in 3D we find that a threshold compression force is necessary to overcome electrostatic repulsion and surface elasticity and establish protein-mediated adhesion. Varying the droplet interaction potential maps out a phase diagram for adhesion as a function of force and salt concentration. Remarkably, fitting the data with our theoretical model predicts binder concentrations in the adhesion areas that are similar to those found in real cells. Moreover, we quantify the adhesion size dependence on the applied force and thus reveal adhesion strengthening with increasing homeos...

  11. Cell adhesion on nanotopography

    Science.gov (United States)

    Tsai, Irene; Kimura, Masahiro; Stockton, Rebecca; Jacobson, Bruce; Russell, Thomas

    2003-03-01

    Cell adhesion, a key element in understanding the cell-biomaterial interactions, underpins proper cell growth, function and survival. Understanding the parameters influencing cell adhesion is critical for applications in biosensors, implants and bioreactors. A gradient surface is used to study the effect of the surface topography on cell adhesion. A gradient surface is generated by block copolymer and homopolymer blends. The two homopolymers will phase separate on the micron scale and gradually decrease to nano-scale by the microphase separation of the diblock. Gradient surfaces offer a unique opportunity to probe lateral variations in the topography and interactions. Using thin films of mixtures of diblock copolymers of PS-b-MMA with PS and PMMA homopolymers, where the concentration of the PS-b-MMA varies across the surface, a gradient in the size scale of the morphology, from the nanoscopic to microscopic, was produced. By UV exposure, the variation in morphology translated into a variation in topography. The extent of cell spreading and cytoskeleton formation was investigated and marked dependence on the length scale of the surface topography was found.

  12. [Fulminant adhesive arachnoiditis].

    Science.gov (United States)

    Tomczykiewicz, Kazimierz; Stępień, Adam; Staszewski, Jacek; Sadowska, Marta; Bogusławska-Walecka, Romana

    2012-01-01

    Adhesive arachnoiditis is a rare disease with insidious course. It causes damage of the spinal cord and nerve roots. The causes of adhesive arachnoiditis include earlier traumatic injury of the spinal cord, surgery, intrathecal administration of therapeutic substances (e.g. anaesthetics, chemotherapy) or contrast media, bleeding, and inflammation. It can also be idiopathic or iatrogenic. We present the case of a 42-year-old patient with fulminant adhesive arachnoiditis which was provoked by spinal surgery and caused severe neurological disability with profound, progressive, flaccid paraparesis and bladder dysfunction. The electromyography (EMG) showed serious damage of nerves of both lower limbs at the level of motor roots L2-S2 and damage of the motor neuron at the level of Th11-Th12 on the right side. Magnetic resonance imaging of the lumbosacral and thoracic part of the spinal cord demonstrated cystic liquid spaces in the lumen of the dural sac in the bottom part of the cervical spine and at the Th2-Th10 level, modelling the lateral and anterior surface of the cord. Because of the vast lesions, surgery could not be performed. Conservative treatment and rehabilitation brought only a small clinical improvement.

  13. Development of phosphorylated adhesives

    Science.gov (United States)

    Bilow, N.; Giants, T. W.; Jenkins, R. K.; Campbell, P. L.

    1983-01-01

    The synthesis of epoxy prepolymers containing phosphorus was carried out in such a manner as to provide adhesives containing at least 5 percent of this element. The purpose of this was to impart fire retardant properties to the adhesive. The two epoxy derivatives, bis(4-glycidyl-oxyphenyl)phenylphosphine oxide and bis(4-glycidyl-2-methoxyphenyl)phenylphosphonate, and a curing agent, bis(3-aminophenyl)methylphosphine oxide, were used in conjunction with one another and along with conventional epoxy resins and curing agents to bond Tedlar and Polyphenylethersulfone films to Kerimid-glass syntactic foam-filled honeycomb structures. Elevated temperatures are required to cure the epoxy resins with the phosphorus-contaning diamine; however, when Tedlar is being bonded, lower curing temperatures must be used to avoid shrinkage and the concomitant formation of surface defects. Thus, the phosphorus-containing aromatic amine curing agent cannot be used alone, although it is possible to use it in conjunction with an aliphatic amine which would allow lower cure temperatures to be used. The experimental epoxy resins have not provided adhesive bonds quite as strong as those provided by Epon 828 when compared in peel tests, but the differences are not very significant. It should be noted, if optimum properties are to be realized. In any case the fire retardant characteristics of the neat resin systems obtained are quite pronounced, since in most cases the self-extinguishing properties are evident almost instantly when specimens are removed from a flame.

  14. Low-Cost Chemical-Responsive Adhesive Sensing Chips.

    Science.gov (United States)

    Tan, Weirui; Zhang, Liyuan; Shen, Wei

    2017-11-20

    Chemical-responsive adhesive sensing chip is a new low-cost analytical platform that uses adhesive tape loaded with indicator reagents to detect or quantify the target analytes by directly sticking the tape to the samples of interest. The chemical-responsive adhesive sensing chips can be used with paper to analyze aqueous samples; they can also be used to detect and quantify solid, particulate, and powder analytes. The colorimetric indicators become immediately visible as the contact between the functionalized adhesives and target samples is made. The chemical-responsive adhesive sensing chip expands the capability of paper-based analytical devices to analyze solid, particulate, or powder materials via one-step operation. It is also a simpler alternative way, to the covalent chemical modification of paper, to eliminate indicator leaching from the dipstick-style paper sensors. Chemical-responsive adhesive chips can display analytical results in the form of colorimetric dot patterns, symbols, and texts, enabling clear understanding of assay results by even nonprofessional users. In this work, we demonstrate the analyses of heavy metal salts in silica powder matrix, heavy metal ions in water, and bovine serum albumin in an aqueous solution. The detection is one-step, specific, sensitive, and easy-to-operate.

  15. The role of alumina nanoparticles in epoxy adhesives

    Science.gov (United States)

    Dorigato, Andrea; Pegoretti, Alessandro

    2011-06-01

    Both untreated and calcined fumed alumina nanoparticles were dispersed into an epoxy-based adhesive at various percentages. The glass transition temperature of the nanofilled adhesives increased up to an optimal filler loading and then decreased, probably due to concurrent and contrasting effects of chain blocking and reduction of the crosslinking degree. Tensile modulus, stress at break, and fracture toughness of bulk adhesive were positively affected by the presence of untreated alumina nanoparticles at an optimal filler content. Mechanical tests on single-lap aluminum bonded joints indicated that untreated alumina nanoparticles markedly improved both the shear strength and fatigue life of the bonded joints. In particular, the shear strength increased by about 60% for an optimal filler content of 1 vol.%, and an adhesive failure mechanism was evidenced for all the tested specimens. Concurrently, a relevant decrease of the equilibrium contact angle with water was observed for nanofilled bulk adhesives. In summary, alumina nanoparticles can effectively improve the mechanical performances of epoxy structural adhesives, both by increasing their mechanical properties and by enhancing the interfacial wettability with an aluminum substrate.

  16. PLATELET ADHESION TO POLYURETHANE UREA UNDER PULSATILE FLOW CONDITIONS

    Science.gov (United States)

    Navitsky, Michael A.; Taylor, Joshua O.; Smith, Alexander B.; Slattery, Margaret J.; Deutsch, Steven; Siedlecki, Christopher A.; Manning, Keefe B.

    2014-01-01

    Platelet adhesion to a polyurethane urea surface is a precursor to thrombus formation within blood-contacting cardiovascular devices, and platelets have been found to adhere strongly to polyurethane surfaces below a shear rate of approximately 500 s−1. The aim of the current work is to determine platelet adhesion properties to the polyurethane urea surface as a function of time varying shear exposure. A rotating disk system is used to study the influence of steady and pulsatile flow conditions (e.g. cardiac inflow and sawtooth waveforms) for platelet adhesion to the biomaterial surface. All experiments retain the same root mean square angular rotation velocity (29.63 rad/s) and waveform period. The disk is rotated in platelet rich bovine plasma for two hours with adhesion quantified by confocal microscopy measurements of immunofluorescently labeled bovine platelets. Platelet adhesion under pulsating flow is found to exponentially decay with increasing shear rate. Adhesion levels are found to depend upon peak platelet flux and shear rate regardless of rotational waveform. In combination with flow measurements, these results may be useful for predicting regions susceptible to thrombus formation within ventricular assist devices. PMID:24721222

  17. Distance-dependent adhesion of vascular cells on biofunctionalized nanostructures

    Directory of Open Access Journals (Sweden)

    Biela Sarah

    2017-09-01

    Full Text Available Cell-cell and cell-extracellular matrix (ECM adhesion regulates fundamental cellular functions and is crucial for cell-material contact. Adhesion is influenced by many factors like affinity and specificity of the receptor-ligand interaction or overall ligand concentration and density. To investigate molecular details of cell-ECM and cadherins (cell-cell interaction in vascular cells functional nanostructured surfaces were used Ligand-functionalized gold nanoparticles (AuNPs with 6-8 nm diameter, are precisely immobilized on a surface and separated by non-adhesive regions so that individual integrins or cadherins can specifically interact with the ligands on the AuNPs. Using 40 nm and 90 nm distances between the AuNPs and functionalized either with peptide motifs of the extracellular matrix (RGD or REDV or vascular endothelial-cadherins (VEC, the influence of distance and ligand specificity on spreading and adhesion of endothelial cells (ECs and smooth muscle cells (SMCs was investigated. We demonstrate that RGD-dependent adhesion of vascular cells is similar to other cell types and that the distance dependence for integrin binding to ECM-peptides is also valid for the REDV motif. VEC-ligands decrease adhesion significantly on the tested ligand distances. These results may be helpful for future improvements in vascular tissue engineering and for development of implant surfaces.

  18. Towards a computational model of leukocyte adhesion cascade: Leukocyte rolling

    Science.gov (United States)

    Khismatullin, Damir

    2005-11-01

    Recruitment of leukocytes into sites of acute and chronic inflammation is a vital component of the innate immune response in humans and plays an important role in cardiovascular diseases, such as ischemia-reperfusion injury and atherosclerosis. Leukocytes extravasate into the inflamed tissue through a multi-step process called "leukocyte adhesion cascade", which involves initial contact of a leukocyte with activated endothelium (tethering), leukocyte rolling, firm adhesion, and transendothelial migration. Recently we developed a fully three-dimensional CFD model of receptor-mediated leukocyte adhesion to endothelium in a parallel-plate flow chamber. The model treats the leukocyte as a viscoelastic cell with the nucleus located in the intracellular space and cylindrical microvilli distributed over the cell membrane. Leukocyte-endothelial adhesion is assumed to be mediated by adhesion molecules expressed on the tips of cell microvilli and on endothelium. We show that the model can predict both shape changes and velocities of rolling leukocytes under physiological flow conditions. Results of this study also indicate that viscosity of the cytoplasm is a critical parameter of leukocyte adhesion, affecting the cell's ability to roll on endothelium. This work is supported by NIH Grant HL- 57446 and NCSA Grant BCS040006 and utilized the NCSA IBM p690.

  19. Carbon nanotube based gecko inspired self-cleaning adhesives

    Science.gov (United States)

    Sethi, Sunny; Ge, Liehui; Ajayan, Pulickel; Ali, Dhinojwala

    2008-03-01

    Wall climbing organisms like geckos have unique ability to attach to different surfaces without use of any viscoelastic material. The hairy structure found in gecko feet allows them to obtain intimate contact over a large area thus allowing then to adhere using van der Waals interactions. Not only high adhesion, the geometry of the hairs makes gecko feet self cleaning, thus allowing them to walk continuously without worrying about loosing adhesive strength. Such properties if mimicked synthetically could form basis of a new class of materials, which, unlike conventional adhesives would show two contradictory properties, self cleaning and high adhesion. Such materials would form essential component of applications like wall climbing robot. We tried to synthesize such material using micropatterened vertically aligned carbon nanotubes. When dealing with large areas, probability of defects in the structure increase, forming patterns instead of using uniform film of carbon nanotubes helps to inhibit crack propagation, thus gives much higher adhesive strength than a uniform film. When carbon nanotube patterns with optimized aspect ratio are used, both high adhesion and self cleaning properties are observed.

  20. Directional adhesion of gecko-inspired angled microfiber arrays

    Science.gov (United States)

    Lee, Jongho; Fearing, Ronald S.; Komvopoulos, Kyriakos

    2008-11-01

    Arrays of angled microfibers with a gecko-inspired structure were fabricated from a stiff thermoplastic polymer (polypropylene) with elastic properties similar to those of β-keratin of natural setae. Friction experiments demonstrated that this fibrillar polymer surface exhibits directional adhesion. Sliding of clean glass surfaces against and along the microfiber direction without applying an external normal force produced an apparent shear stress of 0.1 and 4.5 N/cm2, respectively. This directional adhesion is interpreted in the context of a nonlinear elastic bending model of an angled beam. Shearing and normal contact experiments yielded further evidence of the anisotropic adhesion of the fibrillar polymer and revealed the occurrence of a pull-off (adhesive) force at the instant of surface detachment, unlike vertically aligned microfiber arrays of the same material that exhibited a zero pull-off force. The results of this study provide impetus for the design of gecko-inspired adhesives with angled structures that demonstrate directional adhesion against different material surfaces.

  1. Adhesion of Chlamydomonas microalgae to surfaces is switchable by light

    Science.gov (United States)

    Kreis, Christian Titus; Le Blay, Marine; Linne, Christine; Makowski, Marcin Michal; Bäumchen, Oliver

    2018-01-01

    Microalgae are photoactive microbes that live in liquid-infused environments, such as soil, temporary pools and rocks, where they encounter and colonize a plethora of surfaces. Their photoactivity manifests itself in a variety of processes, including light-directed motility (phototaxis), the growth of microalgal populations, and their photosynthetic machinery. Although microbial responses to light have been widely recognized, any influence of light on cell-surface interactions remains elusive. Here, we reveal that the unspecific adhesion of microalgae to surfaces can be reversibly switched on and off by light. Using a micropipette force spectroscopy technique, we measured in vivo single-cell adhesion forces and show that the microalga's flagella provide light-switchable adhesive contacts with the surface. This light-induced adhesion to surfaces is an active and completely reversible process that occurs on a timescale of seconds. Our results suggest that light-switchable adhesiveness is a natural functionality of microalgae to regulate the transition between the planktonic and the surface-associated state, which yields an adhesive adaptation to optimize the photosynthetic efficiency in conjunction with phototaxis.

  2. A measurement system analysis with design of experiments: Investigation of the adhesion performance of a pressure sensitive adhesive with the probe tack test.

    Science.gov (United States)

    Michaelis, Marc; Leopold, Claudia S

    2015-12-30

    The tack of a pressure sensitive adhesive (PSA) is not an inherent material property and strongly depends on the measurement conditions. Following the concept of a measurement system analysis (MSA), influencing factors of the probe tack test were investigated by a design of experiments (DoE) approach. A response surface design with 38 runs was built to evaluate the influence of detachment speed, dwell time, contact force, adhesive film thickness and API content on tack, determined as the maximum of the stress strain curve (σmax). It could be shown that all investigated factors have a significant effect on the response and that the DoE approach allowed to detect two-factorial interactions between the dwell time, the contact force, the adhesive film thickness and the API content. Surprisingly, it was found that tack increases with decreasing and not with increasing adhesive film thickness. Copyright © 2015. Published by Elsevier B.V.

  3. Effect of a low-viscosity adhesive resin on the adhesion of metal brackets to enamel etched with hydrochloric or phosphoric acid combined with conventional adhesives.

    Science.gov (United States)

    Yetkiner, Enver; Ozcan, Mutlu; Wegehaupt, Florian Just; Wiegand, Annette; Eden, Ece; Attin, Thomas

    2013-12-01

    This study investigated the effect of a low-viscosity adhesive resin (Icon) applied after either hydrochloric (HCl) or phosphoric acid (H3PO4) on the adhesion of metal brackets to enamel. Failure types were analyzed. The crowns of bovine incisors (N = 20) were sectioned mesio-distally and inciso-gingivally, then randomly assigned to 4 groups according to the following protocols to receive mandibular incisor brackets: 1) H3PO4 (37%)+TransbondXT (3M UNITEK); 2) H3PO4 (37%)+Icon+TransbondXT; 3) HCl (15%)+Icon (DMG)+TransbondXT 4) HCl (15%)+Icon+Heliobond (Ivoclar Vivadent)+TransbondXT. Specimens were stored in distilled water at 37°C for 24 h and thermocycled (5000x, 5°C to 55°C). The shear bond strength (SBS) test was performed using a universal testing machine (1 mm/min). Failure types were classified according to the Adhesive Remnant Index (ARI). Contact angles of adhesive resins were measured (n = 5 per adhesive) on ceramic surfaces. No significant difference in SBS was observed, implying no difference between combinations of adhesive resins and etching agents (p = 0.712; ANOVA). The Weibull distribution presented significantly lower Weibull modulus (m) of group 3 (m = 2.97) compared to other groups (m = 5.2 to 6.6) (p group 1 (45.4 ± 7.9) > group 2 (44.2 ± 10.6) > group 3 (42.6 ± 15.5). While in groups 1, 3, and 4 exclusively an ARI score of 0 (no adhesive left on tooth) was observed, in group 2, only one specimen demonstrated score 1 (less than half of adhesive left on tooth). Contact angle measurements were as follows: Icon (25.86 ± 3.81 degrees), Heliobond (31.98 ± 3.17 degrees), TransbondXT (35 ± 2.21 degrees). Icon can be safely used with the conventional adhesives tested on surfaces etched with either HCl or H3PO4.

  4. Experimental and theoretical investigations of the adhesion time of Penicillium spores to cedar wood surface

    Energy Technology Data Exchange (ETDEWEB)

    Soumya, Elabed [Laboratoire de Biotechnologie Microbienne, Faculté des Sciences et Techniques de Fès-Saïs (Morocco); Université Sidi Mohamed Ben Abdellah, Centre Universitaire Régional d' Interface-Fès (Morocco); Saad, Ibnsouda Koraichi, E-mail: ibnsouda@hotmail.com [Laboratoire de Biotechnologie Microbienne, Faculté des Sciences et Techniques de Fès-Saïs (Morocco); Université Sidi Mohamed Ben Abdellah, Centre Universitaire Régional d' Interface-Fès (Morocco); Abdellah, Houari [Laboratoire de Biotechnologie Microbienne, Faculté des Sciences et Techniques de Fès-Saïs (Morocco); Hassan, Latrache [Laboratoire de Valorisation et de Sécurité des Produits Agroalimentaires, Faculté des Sciences et Techniques de Beni Mellal (Morocco)

    2013-04-01

    In this study, the adhesion of 4 Penicillium strains (Penicillium granulatum, Penicillium crustosum, Penicillium commune and Penicillium chrysogenum) on cedar wood was examined qualitatively and quantitatively by using the extended DLVO (XDLVO) approach and the environmental scanning electronic microscopy (ESEM) technique. A comparison between the XDLVO theories and the ESEM technique was also investigated. The adhesion tests revealed that P. chrysogenum was not able to adhere on the cedar wood substrata, as predicted by the XDLVO approach. We have also found by ESEM that the three Penicillium strains (P. granulatum, P. crustosum, P. commune) adhered on wood, as not predicted theoretically. Moreover, the time of adhesion (3 h and 24 h) was used not only to compare the capacity of adhesion according to contact time but also to explain the discrepancies between the XDLVO approach prediction and the adhesion experiments. A positive relationship between the XDLVO approach and adhesion experiments has been observed after 3 h of adhesion. In contrast, a contradiction between the XDLVO predictions and the adhesion test results has been noted after 24 h of adhesion of Penicillium strains to the wood surface. Highlights: ► Calculation of free energy of adhesion to cedar wood of Penicillium by XDLVO approach ► Adhesion is not favorable for all Penicillium spores–cedar wood combinations. ► Adhesion tests demonstrated the ability of Penicillium spores to adhere to cedar wood. ► XDLVO approach correlated well with the results obtained after 3 h of adhesion. ► Discrepancy between XDLVO predictions and experimental observations at 24 h of adhesion.

  5. Doxycycline-encapsulated nanotube-modified dentin adhesives.

    Science.gov (United States)

    Feitosa, S A; Palasuk, J; Kamocki, K; Geraldeli, S; Gregory, R L; Platt, J A; Windsor, L J; Bottino, M C

    2014-12-01

    This article presents details of fabrication, biological activity (i.e., anti-matrix metalloproteinase [anti-MMP] inhibition), cytocompatibility, and bonding characteristics to dentin of a unique doxycycline (DOX)-encapsulated halloysite nanotube (HNT)-modified adhesive. We tested the hypothesis that the release of DOX from the DOX-encapsulated nanotube-modified adhesive can effectively inhibit MMP activity. We incorporated nanotubes, encapsulated or not with DOX, into the adhesive resin of a commercially available bonding system (Scotchbond Multi-Purpose [SBMP]). The following groups were tested: unmodified SBMP (control), SBMP with nanotubes (HNT), and DOX-encapsulated nanotube-modified adhesive (HNT+DOX). Changes in degree of conversion (DC) and microtensile bond strength were evaluated. Cytotoxicity was examined on human dental pulp stem cells (hDPSCs). To prove the successful encapsulation of DOX within the adhesives-but, more important, to support the hypothesis that the HNT+DOX adhesive would release DOX at subantimicrobial levels-we tested the antimicrobial activity of synthesized adhesives and the DOX-containing eluates against Streptococcus mutans through agar diffusion assays. Anti-MMP properties were assessed via β-casein cleavage assays. Increasing curing times (10, 20, 40 sec) led to increased DC values. There were no statistically significant differences (p > .05) in DC within each increasing curing time between the modified adhesives compared to SBMP. No statistically significant differences in microtensile bond strength were noted. None of the adhesives eluates were cytotoxic to the human dental pulp stem cells. A significant growth inhibition of S. mutans by direct contact illustrates successful encapsulation of DOX into the experimental adhesive. More important, DOX-containing eluates promoted inhibition of MMP-1 activity when compared to the control. Collectively, our findings provide a solid background for further testing of encapsulated MMP

  6. The effect of water on the gecko adhesive system

    Science.gov (United States)

    Stark, Alyssa Yeager

    The gecko adhesive system is a dry, reversible adhesive that is virtually surface-insensitive due to the utilization of intermolecular van der Waals forces. Remarkably, although detailed models of the adhesive mechanism exist and hundreds of gecko-inspired synthetics have been fabricated, our ability to fully replicate the system still falls short. One reason for this is our limited understanding of how the system performs in natural environments. To begin to resolve this I focused on one particular environmental parameter, water. Although thin layers of water can disrupt van der Waals forces, I hypothesized that geckos are able to retain or regain adhesive function on wet surfaces. I was motivated to investigate this hypothesis because many species of gecko are native to the tropics, a climate where we expect surface water to be prevalent, thus it is likely geckos have some mechanism to overcome the challenges associated with surface water and wetting. Despite the challenge water should pose to adhesion, I found that when tested on hydrophobic substrates geckos cling equally well in air and water. Conversely, on wet hydrophilic substrates geckos cannot support their body weight. Investigating these results further, I found that the superhydrophobic nature of the adhesive toe pads allows geckos to form an air bubble around their foot, which when pressed into contact with a hydrophobic substrate likely removes water from the adhesive interface. When the toe pads are no longer superhydrophobic however, geckos cannot support their body weight and fall from substrates. In order to regain adhesion geckos only need to take about ten steps on a dry substrate to self-dry their toe pads. Finally, when measuring a dynamic component of adhesion, running, we found that geckos are able to maintain speed on misted hydrophobic and hydrophilic substrates, contrary to what we would predict based on static shear adhesion measurements. In conclusion, my research provides a detailed

  7. Frictional adhesion: A new angle on gecko attachment.

    Science.gov (United States)

    Autumn, K; Dittmore, A; Santos, D; Spenko, M; Cutkosky, M

    2006-09-01

    Directional arrays of branched microscopic setae constitute a dry adhesive on the toes of pad-bearing geckos, nature's supreme climbers. Geckos are easily and rapidly able to detach their toes as they climb. There are two known mechanisms of detachment: (1) on the microscale, the seta detaches when the shaft reaches a critical angle with the substrate, and (2) on the macroscale, geckos hyperextend their toes, apparently peeling like tape. This raises the question of how geckos prevent detachment while inverted on the ceiling, where body weight should cause toes to peel and setal angles to increase. Geckos use opposing feet and toes while inverted, possibly to maintain shear forces that prevent detachment of setae or peeling of toes. If detachment occurs by macroscale peeling of toes, the peel angle should monotonically decrease with applied force. In contrast, if adhesive force is limited by microscale detachment of setae at a critical angle, the toe detachment angle should be independent of applied force. We tested the hypothesis that adhesion is increased by shear force in isolated setal arrays and live gecko toes. We also tested the corollary hypotheses that (1) adhesion in toes and arrays is limited as on the microscale by a critical angle, or (2) on the macroscale by adhesive strength as predicted for adhesive tapes. We found that adhesion depended directly on shear force, and was independent of detachment angle. Therefore we reject the hypothesis that gecko toes peel like tape. The linear relation between adhesion and shear force is consistent with a critical angle of release in live gecko toes and isolated setal arrays, and also with our prior observations of single setae. We introduced a new model, frictional adhesion, for gecko pad attachment and compared it to existing models of adhesive contacts. In an analysis of clinging stability of a gecko on an inclined plane each adhesive model predicted a different force control strategy. The frictional adhesion

  8. Dental adhesives of the future.

    Science.gov (United States)

    Tay, Franklin R; Pashley, David H

    2002-01-01

    The current trend in the development of dentin adhesives attempts to simplify bonding steps and make them more user-friendly. However, optimizing speed and efficiency should be accomplished without major tradeoffs in the quality or durability of resin bonds. Although dentin adhesives have improved tremendously over the past decade, postoperative sensitivity, incomplete marginal seal, premature bond degradation, biocompatibility, and compromised bonding to abnormal substrates are still considered potential problems associated with their use. Advances in different scientific disciplines will enrich the pool from which ideas may be drawn in designing future dentin adhesives. It is probably on the molecular level that we will see the greatest expansion of horizons. With the advances in biomimetics, future dentin adhesive monomers may contain domains derived from protein-based, underwater bioadhesives secreted by aquatic animals such as mussels and barnacles, making them less dependent on the surface energy of the bonding substrates as well as less susceptible to hydrolytic degradation. As adhesive joints produced by contemporary adhesives are brittle in nature, future adhesive design may incorporate biomimetic intermediate-strength domains that can undergo stepwise reversible unfolding in response to varying functional stress levels before ultimate catastrophic failure of the adhesive joint occurs. These domains may also re-establish folded configurations on stress relaxation, making the adhesive both strong and tough. Using the concept of controlled release, future adhesives may contain fluorescent biosensors that can detect pH changes around leaking restorations. They may even have the capacity to heal autonomously, in response to microcracks formed by functional stresses within the adhesive joint. The ability to self-diagnose and self-repair will increase the life expectancy of adhesive restorations. Future dentin adhesives may also assume a more instrumental role

  9. Fabrication and Characterization of Gecko-inspired Fibrillar Adhesive

    Science.gov (United States)

    Kim, Yongkwan

    Over the last decade, geckos' remarkable ability to stick to and climb surfaces found in nature has motivated a wide range of scientific interest in engineering gecko-mimetic surface for various adhesive and high friction applications. The high adhesion and friction of its pads have been attributed to a complex array of hairy structures, which maximize surface area for van der Waals interaction between the toes and the counter-surface. While advances in micro- and nanolithography technique have allowed fabrication of increasingly sophisticated gecko mimetic surfaces, it remains a challenge to produce an adhesive as robust as that of the natural gecko pads. In order to rationally design gecko adhesives, understanding the contact behavior of fibrillar interface is critical. The first chapter of the dissertation introduces gecko adhesion and its potential applications, followed by a brief survey of gecko-inspired adhesives. Challenges that limit the performance of the current adhesives are presented. In particular, it is pointed out that almost all testing of gecko adhesives have been on clean, smooth glass, which is ideal for adhesion due to high surface energy and low roughness. Surfaces in application are more difficult to stick to, so the understanding of failure modes in low energy and rough surfaces is important. The second chapter presents a fabrication method for thermoplastic gecko adhesive to be used for a detailed study of fibrillar interfaces. Low-density polyethylene nanofibers are replicated from a silicon nanowire array fabricated by colloidal lithography and metal-catalyzed chemical etching. This process yields a highly ordered array of nanofibers over a large area with control over fiber diameter, length, and number density. The high yield and consistency of the process make it ideal for a systematic study on factors that affect adhesion and friction of gecko adhesives. The following three chapters examine parameters that affect macroscale friction of

  10. Contact angle hysteresis of liquid drops as means to measure ...

    Indian Academy of Sciences (India)

    Comparison of the results from the different mixed samples with those from the pure zein films showed that force mapping could identify areas rich in protein. The adhesion maps produced were deconvoluted from sample topography and contrasted with the data obtained from contact angle measurements. A comparison of ...

  11. Adhesion prevention in gynaecological surgery.

    Science.gov (United States)

    Robertson, Deborah; Lefebvre, Guylaine

    2010-06-01

    To review the etiology and incidence of and associative factors in the formation of adhesions following gynaecological surgery. To review evidence for the use of available means of adhesion prevention following gynaecological surgery. Women undergoing pelvic surgery are at risk of developing abdominal and/or pelvic adhesive disease postoperatively. Surgical technique and commercial adhesion prevention systems may decrease the risk of postoperative adhesion formation. The outcomes measured are the incidence of postoperative adhesions, complications related to the formation of adhesions, and further intervention relative to adhesive disease. Medline, EMBASE, and The Cochrane Library were searched for articles published in English from 1990 to March 2009, using appropriate controlled vocabulary and key words. Results were restricted to systematic reviews, randomized control trials/controlled clinical trials, cohort studies, and meta-analyses specifically addressing postoperative adhesions, adhesion prevention, and adhesive barriers. Searches were updated on a regular basis and incorporated in the guideline to March 2009. Grey (unpublished) literature was identified through searching the websites of health technology assessment and health technology assessment-related agencies, clinical practice guideline collections, clinical trial registries, and national and international medical specialty societies. The quality of evidence was rated using the criteria described in the Report of the Canadian Task Force on Preventive Health Care SUMMARY STATEMENTS: 1. Meticulous surgical technique is a means of preventing adhesions. This includes minimizing tissue trauma, achieving optimal hemostasis, minimizing the risk of infection, and avoiding contaminants (e.g., fecal matter) and the use of foreign materials (e.g., talcum powder) when possible. (II-2). 2. The risk of adhesions increases with the total number of abdominal and pelvic surgeries performed on one patient; every

  12. Dentine bond strength and antimicrobial activity evaluation of adhesive systems.

    Science.gov (United States)

    André, Carolina Bosso; Gomes, Brenda Paula Figueiredo Almeida; Duque, Thais Mageste; Stipp, Rafael Nobrega; Chan, Daniel Chi Ngai; Ambrosano, Glaucia Maria Bovi; Giannini, Marcelo

    2015-04-01

    This study evaluated the dentine bond strength (BS) and the antibacterial activity (AA) of six adhesives against strict anaerobic and facultative bacteria. Three adhesives containing antibacterial components (Gluma 2Bond (glutaraldehyde)/G2B, Clearfil SE Protect (MDPB)/CSP and Peak Universal Bond (PUB)/chlorhexidine) and the same adhesive versions without antibacterial agents (Gluma Comfort Bond/GCB, Clearfil SE Bond/CSB and Peak LC Bond/PLB) were tested. The AA of adhesives and control groups was evaluated by direct contact method against four strict anaerobic and four facultative bacteria. After incubation, according to the appropriate periods of time for each microorganism, the time to kill microorganisms was measured. For BS, the adhesives were applied according to manufacturers' recommendations and teeth restored with composite. Teeth (n=10) were sectioned to obtain bonded beams specimens, which were tested after artificial saliva storage for one week and one year. BS data were analyzed using two-way ANOVA and Tukey test. Saliva storage for one year reduces the BS only for GCB. In general G2B and GCB required at least 24h for killing microorganisms. PUB and PLB killed only strict anaerobic microorganisms after 24h. For CSP the average time to eliminate the Streptococcus mutans and strict anaerobic oral pathogens was 30 min. CSB showed no AA against facultative bacteria, but had AA against some strict anaerobic microorganisms. Storage time had no effect on the BS for most of the adhesives. The time required to kill bacteria depended on the type of adhesive and never was less than 10 min. Most of the adhesives showed stable bond strength after one year and the Clearfil SE Protect may be a good alternative in restorative procedures performed on dentine, considering its adequate bond strength and better antibacterial activity. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Halloween is a popular time for people to use colored contact lenses to enhance their costumes. From ... Blurry Vision and Daily Eye Drops After One Use Facts About Colored Contacts and Halloween Safety Colored ...

  14. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... glow-in-the-dark lizard lenses, costume contacts can certainly add a spooky, eye-popping touch. But ... consideration as a standard contact lens because they can be purchased over-the-counter or on the ...

  15. Contact Us about Asbestos

    Science.gov (United States)

    How to contact EPA for more information on asbestos, including state and regional contacts, EPA’s Asbestos Abatement/Management Ombudsman and the Toxic Substances Control Act (TSCA) Assistance Information Service (TSCA Hotline).

  16. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Cleveland. "This is far from the truth." Real People, Real Problems with Colored Contact Lenses Julian: Teenager ... Counter Costume Contact Lenses Can Ruin Vision Eye Makeup Safety In fact, it is illegal to sell ...

  17. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... contact lenses , from the U.S. Food and Drug Administration (FDA). Are the colored lenses you are considering ... Follow The Academy Professionals: Education Guidelines News Multimedia Public & Patients: Contact Us About the Academy Jobs at ...

  18. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... popping touch. But colored contact lenses are popular year-round, not just at Halloween. But few know ... contact lenses for Halloween or any time of year, follow these guidelines: Get an eye exam from ...

  19. Corporate Consumer Contact API

    Data.gov (United States)

    General Services Administration — The data in the Corporate Consumer Contact API is based on the content you can find in the Corporate Consumer Contact listing in the Consumer Action Handbook (PDF)....

  20. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... like a suction cup." Halloween is a popular time for people to use colored contact lenses to ... wear costume contact lenses for Halloween or any time of year, follow these guidelines: Get an eye ...

  1. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... is far from the truth." Real People, Real Problems with Colored Contact Lenses Julian: Teenager Blinded In ... colored contact lenses , from the U.S. Food and Drug Administration (FDA). Are the colored lenses you are ...

  2. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Contact Lens Facts Over-the-Counter Costume Contacts May Contain Chemicals Harmful to Eyes Four Ways Over- ... without a prescription are breaking the law, and may be fined $11,000 per violation. "Many of ...

  3. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... contact lenses , from the U.S. Food and Drug Administration (FDA). Are the colored lenses you are considering buying approved by the FDA? Check the FDA's database of approved contact lenses . Related Stories Gene Therapy ...

  4. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... and are being sold illegally," Dr. Steinemann said. Never buy colored contact lenses from a retailer that ... directions for cleaning, disinfecting, and wearing the lenses. Never share contact lenses with another person. Get follow ...

  5. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... buy colored contact lenses from a retailer that does not ask for a prescription. There is no ... of approved contact lenses . Related Stories How long does it take the eye to go back to ...

  6. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... One Use Facts About Colored Contacts and Halloween Safety Colored Contact Lens Facts Over-the-Counter Costume ... new application of artificial intelligence shows whether a patient’s eyes point to high blood pressure or risk ...

  7. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... in a pair of colored contact lenses, Laura Butler of Parkersburg, W.Va., had "extreme pain in ... to wear any kind of contact lens. In Butler's case, the lenses caused an infection and left ...

  8. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... contact lenses, remove the lenses and seek immediate medical attention from an ophthalmologist. Related resources: Learn how to properly care for contact lenses . Learn about the members of ...

  9. Contact Angle Goniometer

    Data.gov (United States)

    Federal Laboratory Consortium — Description:The FTA32 goniometer provides video-based contact angle and surface tension measurement. Contact angles are measured by fitting a mathematical expression...

  10. Contact Lenses - A Review

    OpenAIRE

    Dada V; Sharma Rajiv

    1987-01-01

    A review of recent literature on contact lenses shows increasingly more studies on soft contact lenses than PMMA hard lenses The articles on contact lens wear and ulcerative keratitis have highlighted the increased risk of microbial keratitis in contact lens wearers compared to the general population, higher virulence of pathogens isolated and special association of fungi with EWSCL This high risk is due to multiple factors, organism survival in moist lens cases and cleaning solutions, microt...

  11. Contact lens in keratoconus

    OpenAIRE

    Rathi, Varsha M; Preeji S Mandathara; Srikanth Dumpati

    2013-01-01

    Contact lenses are required for the visual improvement in patients with keratoconus. Various contact lens options, such as rigid gas permeable (RGP) lenses, soft and soft toric lenses, piggy back contact lenses (PBCL), hybrid lenses and scleral lenses are availble. This article discusses about selection of a lens depending on the type of keratoconus and the fitting philosophies of various contact lenses including the starting trial lens. A Medline search was carried out for articles in the En...

  12. Detachment and successive re-attachment of multiple, reversibly-binding tethers result in irreversible bacterial adhesion to surfaces

    NARCIS (Netherlands)

    Sjollema, Jelmer; van der Mei, Henny C.; Hall, Connie L.; Peterson, Brandon W.; de Vries, Joop; Song, Lei; de Jong, Ed D.; Busscher, Henk J.; Swartjes, Jan J. T. M.

    2017-01-01

    Bacterial adhesion to surfaces occurs ubiquitously and is initially reversible, though becoming more irreversible within minutes after first contact with a surface. We here demonstrate for eight bacterial strains comprising four species, that bacteria adhere irreversibly to surfaces through

  13. Adhesion and viability of two enterococcal strains on covalently grafted chitosan and chitosan/kappa-carrageenan multilayers

    NARCIS (Netherlands)

    Bratskaya, S.; Marinin, D.; Simon, F.; Synytska, A.; Zschoche, S.; Busscher, H. J.; Jager, D.; van der Mei, H. C.

    Chitosans are natural aminopolysaccharides, whose low cytotoxicity suggests their potential use for nonadhesive, antibacterial coatings on biomaterials implant surfaces. Here, the antiadhesive behavior and ability to kill bacteria upon adhesion ("contact killing") of chitosan coatings were evaluated

  14. Studying of adhesive properties of candy masses for justification of ways of formation of candies with the combined cases

    Directory of Open Access Journals (Sweden)

    P. M. Smolihina

    2012-01-01

    Full Text Available Influence of prescription components and formation modes on adhesive interaction of candy masses when receiving candies with the combined cases is studied. Recommendations about use of vegetable powders for increase of adhesive durability of contacts between layers of zheleyny and sbivny masses are made.

  15. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... an Ophthalmologist Patient Stories Español Eye Health / News Halloween Hazard: The Hidden Dangers of Buying Decorative Contact ... After One Use Facts About Colored Contacts and Halloween Safety Colored Contact Lens Facts Over-the-Counter ...

  16. New Cosmetic Contact Allergens

    Directory of Open Access Journals (Sweden)

    An Goossens

    2015-02-01

    Full Text Available Allergic and photo-allergic contact dermatitis, and immunologic contact urticaria are potential immune-mediated adverse effects from cosmetics. Fragrance components and preservatives are certainly the most frequently observed allergens; however, all ingredients must be considered when investigating for contact allergy.

  17. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Costume Contact Lenses Can Ruin Vision Eye Makeup Safety In fact, it is illegal to sell colored contact lenses without a prescription in the United States. All contact lenses are medical devices that require a prescription and proper fitting by ...

  18. Gecko-Inspired, Controlled Adhesion and Its Applications

    Science.gov (United States)

    Menguc, Yigit

    This thesis work is primarily concerned with taking inspiration from the principles of gecko-adhesion in order to control the attachment of synthetic structured adhesives. We present gecko-inspired angled elastomer micropillars with flat or round tip endings as compliant pick-and-place micromanipulators. The pillars are 35 mum in diameter, 90 mum tall, and angled at an inclination of 20°. By gently pressing the tip of a pillar to a part, the pillar adheres to it through intermolecular forces. Next, by retracting quickly, the part is picked from a given donor substrate. During transferring, the adhesion between the pillar and the part is high enough to withstand disturbances due to external forces or the weight of the part. During release of the part onto a receiver substrate, the contact area of the pillar to the part is drastically reduced by controlled vertical or shear displacement, which results in reduced adhesive forces. The maximum repeatable ratio of pick-to-release adhesive forces was measured as 39 to 1. We find that a flat tip shape and shear displacement control provide a higher pick-to-release adhesion ratio than a round tip and vertical displacement control, respectively. We present a model of forces to serve as a framework for the operation of this micromanipulator. Finally, demonstrations of pick-and-place manipulation of mum-scale silicon microplatelets and a cm-scale glass cover slip serve as proofs of concept. The compliant polymer micropillars are safe for use with fragile parts, and, due to exploiting intermolecular forces, could be effective on most materials and in air, vacuum, and liquid environments. We present a study of the self-cleaning and contamination resistance phenomena of synthetic gecko-inspired adhesives made from elastomeric polyurethane. The phenomenon of self-cleaning makes the adhesive foot of the gecko robust against dirt, and makes it effectively sticky throughout the lifetime of the material (within the molting cycles

  19. Polymer Claw: Instant Underwater Adhesive

    Science.gov (United States)

    2012-09-24

    3.3 UNDERWATER LAP - SHEAR ADHESION 4 3.4 FULL POLYMER CLAW PROTOTYPE 6 ± NEXT STEPS 7 4.1 BIOFOULED SURFACES 7 4.2 RHEOLOGICAL MEASUREMENTS 7...tested underwater, the lap shear adhesion was ~200x stronger than commercial underwater adhesives after 1 hour. This month also marked the...calibrated to apply a force in the 3.4-3.7 lb. range over a 0.5 sq. in. area. 3.3 Underwater Lap - Shear Adhesion The most important test of the improved

  20. The neural cell adhesion molecule

    DEFF Research Database (Denmark)

    Berezin, V; Bock, E; Poulsen, F M

    2000-01-01

    During the past year, the understanding of the structure and function of neural cell adhesion has advanced considerably. The three-dimensional structures of several of the individual modules of the neural cell adhesion molecule (NCAM) have been determined, as well as the structure of the complex...... between two identical fragments of the NCAM. Also during the past year, a link between homophilic cell adhesion and several signal transduction pathways has been proposed, connecting the event of cell surface adhesion to cellular responses such as neurite outgrowth. Finally, the stimulation of neurite...

  1. Ultra high vacuum adhesion testing of NERVA engine materials

    Science.gov (United States)

    1970-01-01

    The primary objective of this research program was to determine the effects of surface cleaning and deliberate gaseous contamination on the adhesion behavior of selected candidate materials for use in the NERVA nuclear rocket engine program. Using a torsion balance technique, the relationship between the normal compressive load applied to crossed rod samples and the resultant contact resistance was used to ascertain the extent of adhesion under each set of experimental conditions. In addition to an evaluation of the static adhesion behavior of selected materials combinations, the experimental apparatus was modified to permit a similar investigation relating to the effects of specific tangential displacements of the sample wires, i.e., their sliding friction behavior. During the course of this subcontract, the materials combinations 440 C vs. 440 C. pyrographite vs ZTA graphite, Nbc (graphite) vs. Nbc (graphite), and Electrolize Inconel 718 vs. Au electroplated 302 S/S were evaluated.

  2. Conductive Polymer Porous Film with Tunable Wettability and Adhesion

    Directory of Open Access Journals (Sweden)

    Yuqi Teng

    2015-04-01

    Full Text Available A conductive polymer porous film with tunable wettability and adhesion was fabricated by the chloroform solution of poly(3-hexylthiophene (P3HT and [6,6]-phenyl-C61-butyricacid-methyl-ester (PCBM via the freeze drying method. The porous film could be obtained from the solution of 0.8 wt%, whose pore diameters ranged from 50 nm to 500 nm. The hydrophobic porous surface with a water contact angle (CA of 144.7° could be transferred into a hydrophilic surface with CA of 25° by applying a voltage. The water adhesive force on the porous film increased with the increase of the external voltage. The electro-controllable wettability and adhesion of the porous film have potential application in manipulating liquid collection and transportation.

  3. MIGRESIVES: A RESEARCH PROJECT ON MIGRATION FROM ADHESIVES IN FOOD PACKAGING MATERIALS IN SUPPORT OF EUROPEAN LEGISLATION AND STANDARDISATION

    OpenAIRE

    Stoermer, Angela; Franz, Roland

    2009-01-01

    Abstract Most food packages and food contact materials are manufactured using adhesives. The EU regulates all food contact materials, as their constituents may not contaminate food and endanger consumer?s health. In contrary to plastics which are regulated by positive lists of authorised ingredients, adhesives have not yet a specific regulation. The MIGRESIVES project wants to elaborate a scientific global risk assessment approach to meet current general EU regulatory requirements ...

  4. Contact lens in keratoconus

    Directory of Open Access Journals (Sweden)

    Varsha M Rathi

    2013-01-01

    Full Text Available Contact lenses are required for the visual improvement in patients with keratoconus. Various contact lens options, such as rigid gas permeable (RGP lenses, soft and soft toric lenses, piggy back contact lenses (PBCL, hybrid lenses and scleral lenses are availble. This article discusses about selection of a lens depending on the type of keratoconus and the fitting philosophies of various contact lenses including the starting trial lens. A Medline search was carried out for articles in the English language with the keywords keratoconus and various contact lenses such as Rose k lens, RGP lens, hybrid lens, scleral lens and PBCL.

  5. Studies on the Adhesive Property of Snail Adhesive Mucus.

    Science.gov (United States)

    Newar, Janu; Ghatak, Archana

    2015-11-10

    Many gastropod molluscs are known to secrete mucus which allow these animals to adhere to a substrate while foraging over it. While the mucus is known to provide strong adhesion to both dry and wet surfaces, including both horizontal and vertical ones, no systematic study has been carried out to understand the strength of such adhesion under different conditions. We report here results from preliminary studies on adhesion characteristics of the mucus of a snail found in eastern India, Macrochlamys indica. When perturbed, the snail was found to secrete its adhesive mucus, which was collected and subjected to regular adhesion tests. The hydrated mucus was used as such, and also as mixed with buffer of different pH. These experiments suggest that the mucus was slightly alkaline, and showed the maximum adhesion strength of 9 kPa when present in an alkaline buffer. Preliminary studies indicate that adhesive force is related to the ability of the mucus to incorporate water. In alkaline condition, the gel like mass that it forms, incorporate water from a wet surface and enable strong adhesion.

  6. Asymptotic Expansions of the Contact Angle in Nonlocal Capillarity Problems

    Science.gov (United States)

    Dipierro, Serena; Maggi, Francesco; Valdinoci, Enrico

    2017-10-01

    We consider a family of nonlocal capillarity models, where surface tension is modeled by exploiting the family of fractional interaction kernels |z|^{-n-s}, with s\\in (0,1) and n the dimension of the ambient space. The fractional Young's law (contact angle condition) predicted by these models coincides, in the limit as s→ 1^-, with the classical Young's law determined by the Gauss free energy. Here we refine this asymptotics by showing that, for s close to 1, the fractional contact angle is always smaller than its classical counterpart when the relative adhesion coefficient σ is negative, and larger if σ is positive. In addition, we address the asymptotics of the fractional Young's law in the limit case s→ 0^+ of interaction kernels with heavy tails. Interestingly, near s=0, the dependence of the contact angle from the relative adhesion coefficient becomes linear.

  7. Stretchable, Adhesion-Tunable Dry Adhesive by Surface Wrinkling

    KAUST Repository

    Jeong, Hoon Eui

    2010-02-16

    We introduce a simple yet robust method of fabricating a stretchable, adhesion-tunable dry adhesive by combining replica molding and surface wrinkling. By utilizing a thin, wrinkled polydimethyl siloxane (PDMS) sheet with a thickness of 1 mm with built-in micropillars, active, dynamic control of normal and shear adhesion was achieved. Relatively strong normal (∼10.8 N/cm2) and shear adhesion (∼14.7 N/cm2) forces could be obtained for a fully extended (strained) PDMS sheet (prestrain of∼3%), whereas the forces could be rapidly reduced to nearly zero once the prestrain was released (prestrain of ∼0.5%). Moreover, durability tests demonstrated that the adhesion strength in both the normal and shear directions was maintained over more than 100 cycles of attachment and detachment. © 2010 American Chemical Society.

  8. Improved Adhesion and Compliancy of Hierarchical Fibrillar Adhesives.

    Science.gov (United States)

    Li, Yasong; Gates, Byron D; Menon, Carlo

    2015-08-05

    The gecko relies on van der Waals forces to cling onto surfaces with a variety of topography and composition. The hierarchical fibrillar structures on their climbing feet, ranging from mesoscale to nanoscale, are hypothesized to be key elements for the animal to conquer both smooth and rough surfaces. An epoxy-based artificial hierarchical fibrillar adhesive was prepared to study the influence of the hierarchical structures on the properties of a dry adhesive. The presented experiments highlight the advantages of a hierarchical structure despite a reduction of overall density and aspect ratio of nanofibrils. In contrast to an adhesive containing only nanometer-size fibrils, the hierarchical fibrillar adhesives exhibited a higher adhesion force and better compliancy when tested on an identical substrate.

  9. Nanoparticle solutions as adhesives for gels and biological tissues

    Science.gov (United States)

    Rose, Séverine; Prevoteau, Alexandre; Elzière, Paul; Hourdet, Dominique; Marcellan, Alba; Leibler, Ludwik

    2014-01-01

    Adhesives are made of polymers because, unlike other materials, polymers ensure good contact between surfaces by covering asperities, and retard the fracture of adhesive joints by dissipating energy under stress. But using polymers to `glue' together polymer gels is difficult, requiring chemical reactions, heating, pH changes, ultraviolet irradiation or an electric field. Here we show that strong, rapid adhesion between two hydrogels can be achieved at room temperature by spreading a droplet of a nanoparticle solution on one gel's surface and then bringing the other gel into contact with it. The method relies on the nanoparticles' ability to adsorb onto polymer gels and to act as connectors between polymer chains, and on the ability of polymer chains to reorganize and dissipate energy under stress when adsorbed onto nanoparticles. We demonstrate this approach by pressing together pieces of hydrogels, for approximately 30 seconds, that have the same or different chemical properties or rigidities, using various solutions of silica nanoparticles, to achieve a strong bond. Furthermore, we show that carbon nanotubes and cellulose nanocrystals that do not bond hydrogels together become adhesive when their surface chemistry is modified. To illustrate the promise of the method for biological tissues, we also glued together two cut pieces of calf's liver using a solution of silica nanoparticles. As a rapid, simple and efficient way to assemble gels or tissues, this method is desirable for many emerging technological and medical applications such as microfluidics, actuation, tissue engineering and surgery.

  10. Effect of Superhydrophobic Surface of Titanium on Staphylococcus aureus Adhesion

    Directory of Open Access Journals (Sweden)

    Peifu Tang

    2011-01-01

    Full Text Available Despite the systemic antibiotics prophylaxis, orthopedic implants still remain highly susceptible to bacterial adhesion and resulting in device-associated infection. Surface modification is an effective way to decrease bacterial adhesion. In this study, we prepared surfaces with different wettability on titanium surface based on TiO2 nanotube to examine the effect of bacterial adhesion. Firstly, titanium plates were calcined to form hydrophilic TiO2 nanotube films of anatase phase. Subsequently, the nanotube films and inoxidized titaniums were treated with 1H, 1H, 2H, 2H-perfluorooctyl-triethoxysilane (PTES, forming superhydrophobic and hydrophobic surfaces. Observed by SEM and contact angle measurements, the different surfaces have different characteristics. Staphylococcus aureus (SA adhesion on different surfaces was evaluated. Our experiment results show that the superhydrophobic surface has contact angles of water greater than 150∘ and also shows high resistance to bacterial contamination. It is indicated that superhydrophobic surface may be a factor to reduce device-associated infection and could be used in clinical practice.

  11. 21 CFR 880.5240 - Medical adhesive tape and adhesive bandage.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Medical adhesive tape and adhesive bandage. 880... Personal Use Therapeutic Devices § 880.5240 Medical adhesive tape and adhesive bandage. (a) Identification. A medical adhesive tape or adhesive bandage is a device intended for medical purposes that consists...

  12. Statics and dynamics of adhesion between two soap bubbles.

    Science.gov (United States)

    Besson, S; Debrégeas, G

    2007-10-01

    An original set-up is used to study the adhesive properties of two hemispherical soap bubbles put into contact. The contact angle at the line connecting the three films is extracted by image analysis of the bubbles profiles. After the initial contact, the angle rapidly reaches a static value slightly larger than the standard 120 degrees angle expected from Plateau rule. This deviation is consistent with previous experimental and theoretical studies: it can be quantitatively predicted by taking into account the finite size of the Plateau border (the liquid volume trapped at the vertex) in the free energy minimization. The visco-elastic adhesion properties of the bubbles are further explored by measuring the deviation Delta theta (d)(t) of the contact angle from the static value as the distance between the two bubbles supports is sinusoidally modulated. It is found to linearly increase with Delta r(c) / r(c) , where r(c) is the radius of the central film and Delta r(c) the amplitude of modulation of this length induced by the displacement of the supports. The in-phase and out-of-phase components of Delta theta (d)(t) with the imposed modulation frequency are systematically probed, which reveals a transition from a viscous to an elastic response of the system with a crossover pulsation of the order 1rad x s(-1). Independent interfacial rheological measurements, obtained from an oscillating bubble experiment, allow us to develop a model of dynamic adhesion which is confronted to our experimental results. The relevance of such adhesive dynamic properties to the rheology of foams is briefly discussed using a perturbative approach to the Princen 2D model of foams.

  13. Effect of fibril shape on adhesive properties

    Science.gov (United States)

    Soto, Daniel; Hill, Ginel; Parness, Aaron; Esparza, Noé; Cutkosky, Mark; Kenny, Tom

    2010-08-01

    Research into the gecko's adhesive system revealed a unique architecture for adhesives using tiny hairs. By using a stiff material (β-keratin) to create a highly structured adhesive, the gecko's system demonstrates properties not seen in traditional pressure-sensitive adhesives which use a soft, unstructured planar layer. In contrast to pressure sensitive adhesives, the gecko adhesive displays frictional adhesion, in which increased shear force allows it to withstand higher normal loads. Synthetic fibrillar adhesives have been fabricated but not all demonstrate this frictional adhesion property. Here we report the dual-axis force testing of single silicone rubber pillars from synthetic adhesive arrays. We find that the shape of the adhesive pillar dictates whether frictional adhesion or pressure-sensitive behavior is observed. This work suggests that both types of behavior can be achieved with structures much larger than gecko terminal structures. It also indicates that subtle differences in the shape of these pillars can significantly influence their properties.

  14. Regulative mechanisms of chondrocyte adhesion

    DEFF Research Database (Denmark)

    Schmal, Hagen; Mehlhorn, Alexander T; Fehrenbach, Miriam

    2006-01-01

    Interaction between chondrocytes and extracellular matrix is considered a key factor in the generation of grafts for matrix-associated chondrocyte transplantation. Therefore, our objective was to study the influence of differentiation status on cellular attachment. Adhesion of chondrocytes...... to collagen type II increased after removal from native cartilage up to the third day in monolayer in a dose-dependent manner. Following dedifferentiation after the second passage, adhesion to collagen types I (-84%) and II (-46%) decreased, whereas adhesion to fibrinogen (+59%) and fibronectin (+43......%) increased. A cartilage construct was developed based on a clinically established collagen type I scaffold. In this matrix, more than 80% of the cells could be immobilized by mechanisms of adhesion, filtration, and cell entrapment. Confocal laser microscopy revealed focal adhesion sites as points of cell...

  15. Physical characterization of the liquid adhesive from orb-weaving spiders

    Energy Technology Data Exchange (ETDEWEB)

    Torres, Fernando G., E-mail: fgtorres@pucp.edu.pe; Troncoso, Omar P.; Cavalie, Fernando

    2014-01-01

    Orb-weaving spiders produce bioadhesives that are used to capture their prey. In this paper, the physical properties of these adhesives are characterised. The liquid adhesive from Argiope argentata spiders has been studied and the morphological properties of the droplets, including size, shape and volume were determined. An estimation of viscosity and Young's modulus using atomic force microscopy has also been carried out. Morphological characterization confirmed that the liquid adhesive displayed a typical beads-on-a-string (BOAS) morphology on the silk fibres. The experimental data confirmed that the elastic modulus of the liquid adhesive from A. argentata was in the range 20–100 kPa which is in agreement with the Dahlquist criterion for adhesives. - Highlights: • The adhesive of the A. Argentata spiders displayed a beads-on-a-string morphology. • The adhesive drops had an average radius of 6.5 μm. • The adhesive drops had an estimated contact angle of 10°. • The estimated apparent viscosity of the adhesive was in the range 340–680 Pa·s. • AFM indentation measurements provided a Young's modulus value of 70 ± 47 kPa.

  16. Surgical applications of cyanoacrylate adhesives: a review of toxicity.

    Science.gov (United States)

    Leggat, Peter A; Smith, Derek R; Kedjarune, Ureporn

    2007-04-01

    Cyanoacrylate (CA) and its homologues have a variety of medical and commercial applications as biological adhesives and sealants. Homologues of CA are being widely promoted in surgery as a tissue adhesive to replace traditional suturing techniques. Potential benefits of using CA adhesives include better cosmetic results, more rapid wound closure, and perhaps most significantly, the potential for significant reductions in percutaneous injuries from suture needles, which would in turn also reduce the risk of transmission of infectious diseases. Nevertheless, certain concerns have been raised regarding the potential toxicity of CA within patients, as well as among health professionals who are occupationally exposed when using CA compounds. Reported toxicity of CA in the workplace may result in dermatological, allergic and respiratory conditions. To help reduce the occupational burden, therefore, medical staff using CA adhesives should avoid direct contact with the compound and use appropriate personal protective measures at all times. Maintaining higher levels of humidity, optimizing room ventilation and using special air conditioning filters in surgical suites and operating theatres may also be useful in minimizing the exposure to volatile CA adhesives.

  17. Adhesion force of staphylococcus aureus on various biomaterial surfaces.

    Science.gov (United States)

    Alam, Fahad; Balani, Kantesh

    2017-01-01

    Staphylococcus comprises of more than half of all pathogens in orthopedic implant infections and they can cause major bone infection which can result in destruction of joint and bone. In the current study, adhesion force of bacteria on the surface of various biomaterial surfaces is measured using atomic force microscope (AFM). Staphylococcus aureus was immobilized on an AFM tipless cantilever as a force probe to measure the adhesion force between bacteria and biomaterials (viz. ultra-high molecular weight poly ethylene (UHMWPE), stainless steel (SS), Ti-6Al-4V alloy, hydroxyapatite (HA)). At the contact time of 10s, UHMWPE shows weak adhesion force (~4nN) whereas SS showed strong adhesion force (~15nN) due to their surface energy and surface roughness. Bacterial retention and viability experiment (3M™ petrifilm test, agar plate) dictates that hydroxyapatite shows the lowest vaibility of bacteria, whereas lowest bacterial retention is observed on UHMWPE surface. Similar results were obtained from live/dead staining test, where HA shows 65% viability, whereas on UHMWPE, SS and Ti-6Al-4V, the bacterial viability is 78%, 94% and 97%, respectively. Lower adhesion forces, constrained pull-off distance (of bacterial) and high antibacterial resistance of bioactive-HA makes it a potential biomaterial for bone-replacement arthroplasty. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Electroplated contacts and porous silicon for silicon based solar cells applications

    Energy Technology Data Exchange (ETDEWEB)

    Kholostov, Konstantin, E-mail: kholostov@diet.uniroma1.it [Department of information engineering, electronics and telecommunications, University of Rome “La Sapienza”, Via Eudossiana 18, 00184 Rome (Italy); Serenelli, Luca; Izzi, Massimo; Tucci, Mario [Enea Casaccia Research Centre Rome, via Anguillarese 301, 00123 Rome (Italy); Balucani, Marco [Department of information engineering, electronics and telecommunications, University of Rome “La Sapienza”, Via Eudossiana 18, 00184 Rome (Italy); Rise Technology S.r.l., Lungomare Paolo Toscanelli 170, 00121 Rome (Italy)

    2015-04-15

    Highlights: • Uniformity of the Ni–Si interface is crucial for performance of Cu–Ni contacts on Si. • Uniformly filled PS is the key to obtain the best performance of Cu–Ni contacts on Si. • Optimization of anodization and electroplating allows complete filling of PS layer. • Highly adhesive and low contact resistance Cu–Ni contacts are obtained on Si. - Abstract: In this paper, a two-layer metallization for silicon based solar cells is presented. The metallization consists of thin nickel barrier and thick copper conductive layers, both obtained by electrodeposition technique suitable for phosphorus-doped 70–90 Ω/sq solar cell emitter formed on p-type silicon substrate. To ensure the adhesion between metal contact and emitter a very thin layer of mesoporous silicon is introduced on the emitter surface before metal deposition. This approach allows metal anchoring inside pores and improves silicon–nickel interface uniformity. Optimization of metal contact parameters is achieved varying the anodization and electrodeposition conditions. Characterization of contacts between metal and emitter is carried out by scanning electron microscopy, specific contact resistance and current–voltage measurements. Mechanical strength of nickel–copper contacts is evaluated by the peel test. Adhesion strength of more than 4.5 N/mm and contact resistance of 350 μΩ cm{sup 2} on 80 Ω/sq emitter are achieved.

  19. Dynamics of Nanoparticle Adhesion

    Science.gov (United States)

    Carrillo, J.-M. Y.; Dobrynin, A. V.

    2013-03-01

    We performed molecular dynamics simulations and theoretical analysis of nanoparticle pulling off from adhesive substrates. Our theoretical model of nanoparticle detachment is based on the Kramers solution of the stochastic barrier crossing in effective one dimensional potential well. The activation energy, ΔE , for nanoparticle detachment first decreases linearly with increasing the magnitude of the applied force, f, then it follows a power law ΔE ~(f * - f)3/2 as magnitude of the pulling force f approaches a critical detachment force value, f*. These two different regimes in activation energy dependence on magnitude of the applied force are confirmed by analyzing nanoparticle detachment in effective one dimensional potential obtained by Weighted Histogram Analysis Method. Simulations show that detachment of nanoparticle proceeds through neck formation such that magnitude of the activation energy is determined by balancing surface energy of the neck connecting particle to a substrate with elastic energy of nanoparticle deformation. In this regime the activation energy at zero applied force, ΔE0 , for nanoparticle with radius, Rp, shear modulus, G, surface energy, γp, and work of adhesion, W, is a universal function of the dimensionless parameter δ ~γpW - 2 / 3(GRp)-1/3 . Simulation data are described by a scaling function ΔE0 ~γp5 / 2 Rp1 / 2 G - 3 / 2δ - 3 . 75 . Molecular dynamics simulations of nanoparticle detachment show that the Kramers approach fails in the vicinity of the critical detachment force f* where activation energy barrier becomes smaller than kB T . NSF DMR-1004576

  20. Universal adhesives: the next evolution in adhesive dentistry?

    Science.gov (United States)

    Alex, Gary

    2015-01-01

    Every so often a new material, technique, or technological breakthrough spurs a paradigm shift in the way dentistry is practiced. The development and evolution of reliable enamel and dentin bonding agents is one such example. Indeed, the so-called "cosmetic revolution" in dentistry blossomed in large part due to dramatic advances in adhesive technology. It is the ability to bond various materials in a reasonably predictable fashion to both enamel and dentin substrates that enables dentists to routinely place porcelain veneers, direct and indirect composites, and a plethora of other restorative and esthetic materials. In fact, the longevity and predictability of many (if not most) current restorative procedures is wholly predicated on the dentist's ability to bond various materials to tooth tissues. Adhesive systems have progressed from the largely ineffective systems of the 1970s and early 1980s to the relatively successful total- and self-etching systems of today. The latest players in the adhesive marketplace are the so-called "universal adhesives." In theory, these systems have the potential to significantly simplify and expedite adhesive protocols and may indeed represent the next evolution in adhesive dentistry. But what defines a universal system, and are all these new systems truly "universal" and everything they are claimed to be? This article will examine the origin, chemistry, strengths, weaknesses, and clinical relevance of this new genre of dental adhesives.

  1. Adhesion and Spreading of Human Fibroblasts on Superhydrophobic Fep-Teflon

    OpenAIRE

    Busscher, H. J.; Stokroos, I.; Golverdingen, J. G.; Shakenraad, J. M.

    1991-01-01

    Adhesion and spreading of human fibroblasts was studied on hydrophobized and hydrophilized FEPTeflon, and compared with adhesion and spreading on untreated FEP-Teflon and Tissue culture polystyrene (TCPS). Superhydrophobic FEP-Teflon was prepared by ion etching followed by oxygen glow-discharge. Hydrophilic PEP-Teflon was prepared by ion etching only. Water contact angles of the modified surfaces were 140- 1500 and 5-10° for the hydrophobic and the hydrophilic variant, respectively. (Untreate...

  2. Introduction to contact mechanics

    CERN Document Server

    Fischer-Cripps, Anthony C

    2000-01-01

    Contact mechanics deals with the elastic or plastic contact between two solid objects, and is thus intimately connected with such topics as fracture, hardness, and elasticity.This text, intended for advanced undergraduates, begins with an introduction to the mechanical properties of materials, general fracture mechanics, and fractures in brittle solids.This is followed by a detailed discussion of stresses and the nature of elastic and elastic-plastic contact.

  3. The Molecular Architecture of Cell Adhesion: Dynamic Remodeling Revealed by Videonanoscopy

    Directory of Open Access Journals (Sweden)

    Arnauld eSergé

    2016-05-01

    Full Text Available The plasma membrane delimits the cell, which is the basic unit of living organisms, and is also a privileged site for cell communication with the environment. Cell adhesion can occur through cell-cell and cell-matrix contacts. Adhesion proteins such as integrins and cadherins also constitute receptors for inside-out and outside-in signaling within proteolipidic platforms. Adhesion molecule targeting and stabilization relies on specific features such as preferential segregation by the sub-membrane cytoskeleton meshwork and within membrane proteolipidic microdomains. This review presents an overview of the recent insights brought by the latest developments in microscopy, to unravel the molecular remodeling occurring at cell contacts. The dynamic aspect of cell adhesion was recently highlighted by super-resolution videomicroscopy, also named videonanoscopy. By circumventing the diffraction limit of light, nanoscopy has allowed the monitoring of molecular localization and behavior at the single-molecule level, on fixed and living cells. Accessing molecular-resolution details such as quantitatively monitoring components entering and leaving cell contacts by lateral diffusion and reversible association has revealed an unexpected plasticity. Adhesion structures can be highly specialized, such as focal adhesion in motile cells, as well as immune and neuronal synapses. Spatiotemporal reorganization of adhesion molecules, receptors and adaptors directly relates to structure/function modulation. Assembly of these supramolecular complexes is continuously balanced by dynamic events, remodeling adhesions on various timescales, notably by molecular conformation switches, lateral diffusion within the membrane and endo/exocytosis. Pathological alterations in cell adhesion are involved in cancer evolution, through cancer stem cell interaction with stromal niches, growth, extravasation and metastasis.

  4. Contact Quality in Participation

    DEFF Research Database (Denmark)

    Simonsen, Jesper; Jensen, Olav Storm

    2016-01-01

    We investigate the concept of participation from the perspective of quality of the contact in the communicative interactions between participants. We argue for the need for an academic-personal competence that qualifies the human contact central in all Participatory Design (PD) activities as a way...... to contribute to “an era of participation.” We describe a contact perspective in PD developed through a collaboration with body-oriented psychotherapeutic research that have specialized experiences in investigating open-minded contact and authentic meetings as body-related experiences....

  5. Contact lenses for children.

    Science.gov (United States)

    Jurkus, J M

    1996-01-01

    Contact lenses for children are used to correct a variety of conditions. This paper reviews fitting of soft, silicone elastimer, and rigid gas-permeable contact lenses for therapeutic treatment of aphakia, anisometropia, myopia, hyperopia, esotropia, irregular astigmatism, and nystagmus. Cosmetic custom designs are described for the treatment of aniridia, albinism, amblyopia, and corneal disfigurement. Working with children and gaining their trust requires inventiveness and patience. Prescribing contact lenses for them requires developing good cooperation between the child, the parents, and the practitioner. The rewards of contact lenses wear for the appropriate pediatric patients include improving not only their vision but also their quality of life.

  6. Rigid Bodies in Contact

    DEFF Research Database (Denmark)

    Niebe, Sarah Maria

    The topic of this thesis is the numerics of rigid body simulation, with focus on the contact force problem. Three contact force models are presented, followed by three contact point determination methods. To solve the contact force problem, six different numerical methods are presented, each......-Seidel (PGS), although computationally more expensive. The NNCG method has been implemented in the physics library Bullet, as of revision r2709, as an alternative to the PGS method. A subspace minimization method is developed to improve convergence of the PGS method, improving the results of large mass ratio...

  7. Allergic Contact Dermatitis

    Directory of Open Access Journals (Sweden)

    Meltem Önder

    2009-03-01

    Full Text Available Allergic contact dermatitis is the delayed type hypersensitivity reaction to exogenous agents. Allergic contact dermatitis may clinically present acutely after allergen exposure and initial sensitization in a previously sensitized individual. Acute phase is characterized by erythematous, scaly plaques. In severe cases vesiculation and bullae in exposed areas are very characteristic. Repeated or continuous exposure of sensitized individual with allergen result in chronic dermatitis. Lichenification, erythematous plaques, hyperkeratosis and fissuring may develop in chronic patients. Allergic contact dermatitis is very common dermatologic problem in dermatology daily practice. A diagnosis of contact dermatitis requires the careful consideration of patient history, physical examination and patch testing. The knowledge of the clinical features of the skin reactions to various contactans is important to make a correct diagnosis of contact dermatitis. It can be seen in every age, in children textile product, accessories and touch products are common allergens, while in adults allergic contact dermatitis may be related with topical medicaments. The contact pattern of contact dermatitis depends on fashion and local traditions as well. The localization of allergic reaction should be evaluated and patients’ occupation and hobbies should be asked. The purpose of this review is to introduce to our collaques up dated allergic contact dermatitis literatures both in Turkey and in the World.

  8. Grander system: a new technology to reduce surface tension of adhesive systems in dentistry.

    Science.gov (United States)

    Gonçalves, Sérgio Eduardo de Paiva; Cruz, Nilson; Brayner, Ricardo; Huhtala, Maria Filomena Rocha Lima; Borges, Alessandra Bühler; Barcellos, Daphne Câmara

    2014-01-01

    Reduced surface tension of liquids results in higher surface wetting ability and diffusivity by the substrate. The objective of this study was to evaluate the influence of the Grander Technology in reducing the surface tension of adhesive systems. Two adhesive systems (self-etch and total-etch) were modified by physical contact with the Grander system Flexible unit to revitalize water, for 48 h. Surface tension of adhesive systems and water in normal and grander-modified conditions was measured with a goniometer. The results showed a reduction of surface tension for all conditions grander-modified between 3-15%. Grander Technology was effective in reducing the surface tension of the Single Bond and Clearfil SE Bond adhesive systems. Clinical significance. Grander technology was employed to restructure the molecular structure of water-based adhesive systems, which can increase their wetness capacity and therefore ensure a greater diffusibility.

  9. Influence of abdominal incision on the formation of postoperative peritoneal adhesions: an experimental study in rats.

    Science.gov (United States)

    Moreno, A; Aguayo, J L; Zambudio, G; Ramirez, P; Canteras, M; Parrilla, P

    1996-03-01

    To see if the three most commonly used abdominal incisions were associated with the development of postoperative peritoneal adhesions. Prospective experimental study. University hospital, Spain. 30 Wistar rats. Three groups each of 10 rats underwent suprainfraumbilical midline laparotomy, right subcostal laparotomy or infraumbilical right transrectal laparotomy. The animals were killed after 30 days and adhesions quantified according to a special designed score which assessed the number of adhesions, their site, vascularisation, thickness, and strength. The transrectal incision was associated with most adhesions (median: 9.3, interquartile 7-10), followed by subcostal laparotomy (5.5, 4-6.7), and midline laparotomy (2.0, 0-7). Infraumbilical incisions away from the midline are more traumatic, damage more of the peritoneum, and are more likely to come into contact with the omentum, peritoneal fat, bowel loops, and pelvic contents, thereby predisposing to the formation of peritoneal adhesions.

  10. Robust adhesion of flower-like few-layer graphene nanoclusters

    Science.gov (United States)

    Tian, Shibing; Li, Lin; Sun, Wangning; Xia, Xiaoxiang; Han, Dong; Li, Junjie; Gu, Changzhi

    2012-07-01

    Nanostructured surface possessing ultrahigh adhesion like ``gecko foot'' or ``rose petal'' can offer more opportunities for bionic application. We grow flower-like few-layer graphene on silicon nanocone arrays to form graphene nanoclusters, showing robust adhesion. Their contact angle (CA) is 164° with a hysteresis CA of 155° and adhesive force for a 5 μL water droplet is about 254 μN that is far larger than present reported results. We bring experimental evidences that this great adhesion depends on large-area plentiful edges of graphene nanosheets tuned by conical nanostructure and intrinsic wetting features of graphene. Such new hierarchical few-layer graphene nanostructure provides a feasible strategy to understand the ultra-adhesive mechanism of the ``gecko effect'' or ``rose effect'' and enhance the wettability of graphene for many practical applications.

  11. The influence of surface lubricity on the adhesion of Navicula perminuta and Ulva linza to alkanethiol self-assembled monolayers.

    Science.gov (United States)

    Bowen, J; Pettitt, M E; Kendall, K; Leggett, G J; Preece, J A; Callow, M E; Callow, J A

    2007-06-22

    The settlement and adhesion of Navicula perminuta and Ulva linza to methyl-terminated alkanethiol self-assembled monolayers (SAMs) of increasing chain length has been investigated. Organisms were allowed to settle onto the monolayers and were subsequently exposed to hydrodynamic shear stress in order to determine their adhesion strength. Results show that as the SAM structure changes from amorphous to crystalline (C14), there is a marked change in the adhesion of N. perminuta and U. linza. Given that the SAMs in the series all exhibit similar contact angle behaviour and surface energy, it is hypothesized that the lubricity of the surface plays a role in determining the surface adhesion.

  12. Enhanced adhesion by gecko-inspired hierarchical fibrillar adhesives.

    Science.gov (United States)

    Murphy, Michael P; Kim, Seok; Sitti, Metin

    2009-04-01

    The complex structures that allow geckos to repeatably adhere to surfaces consist of multilevel branching fibers with specialized tips. We present a novel technique for fabricating similar multilevel structures from polymer materials and demonstrate the fabrication of arrays of two- and three-level structures, wherein each level terminates in flat mushroom-type tips. Adhesion experiments are conducted on two-level fiber arrays on a 12-mm-diameter glass hemisphere, which exhibit both increased adhesion and interface toughness over one-level fiber samples and unstructured control samples. These adhesion enhancements are the result of increased surface conformation as well as increased extension during detachment.

  13. Wet adhesion and adhesive locomotion of snails on anti-adhesive non-wetting surfaces.

    Directory of Open Access Journals (Sweden)

    Neil J Shirtcliffe

    Full Text Available Creating surfaces capable of resisting liquid-mediated adhesion is extremely difficult due to the strong capillary forces that exist between surfaces. Land snails use this to adhere to and traverse across almost any type of solid surface of any orientation (horizontal, vertical or inverted, texture (smooth, rough or granular or wetting property (hydrophilic or hydrophobic via a layer of mucus. However, the wetting properties that enable snails to generate strong temporary attachment and the effectiveness of this adhesive locomotion on modern super-slippy superhydrophobic surfaces are unclear. Here we report that snail adhesion overcomes a wide range of these microscale and nanoscale topographically structured non-stick surfaces. For the one surface which we found to be snail resistant, we show that the effect is correlated with the wetting response of the surface to a weak surfactant. Our results elucidate some critical wetting factors for the design of anti-adhesive and bio-adhesion resistant surfaces.

  14. Wet adhesion and adhesive locomotion of snails on anti-adhesive non-wetting surfaces.

    Science.gov (United States)

    Shirtcliffe, Neil J; McHale, Glen; Newton, Michael I

    2012-01-01

    Creating surfaces capable of resisting liquid-mediated adhesion is extremely difficult due to the strong capillary forces that exist between surfaces. Land snails use this to adhere to and traverse across almost any type of solid surface of any orientation (horizontal, vertical or inverted), texture (smooth, rough or granular) or wetting property (hydrophilic or hydrophobic) via a layer of mucus. However, the wetting properties that enable snails to generate strong temporary attachment and the effectiveness of this adhesive locomotion on modern super-slippy superhydrophobic surfaces are unclear. Here we report that snail adhesion overcomes a wide range of these microscale and nanoscale topographically structured non-stick surfaces. For the one surface which we found to be snail resistant, we show that the effect is correlated with the wetting response of the surface to a weak surfactant. Our results elucidate some critical wetting factors for the design of anti-adhesive and bio-adhesion resistant surfaces.

  15. Dissecting signaling and functions of adhesion G protein-coupled receptors.

    Science.gov (United States)

    Araç, Demet; Aust, Gabriela; Calebiro, Davide; Engel, Felix B; Formstone, Caroline; Goffinet, André; Hamann, Jörg; Kittel, Robert J; Liebscher, Ines; Lin, Hsi-Hsien; Monk, Kelly R; Petrenko, Alexander; Piao, Xianhua; Prömel, Simone; Schiöth, Helgi B; Schwartz, Thue W; Stacey, Martin; Ushkaryov, Yuri A; Wobus, Manja; Wolfrum, Uwe; Xu, Lei; Langenhan, Tobias

    2012-12-01

    G protein-coupled receptors (GPCRs) comprise an expanded superfamily of receptors in the human genome. Adhesion class G protein-coupled receptors (adhesion-GPCRs) form the second largest class of GPCRs. Despite the abundance, size, molecular structure, and functions in facilitating cell and matrix contacts in a variety of organ systems, adhesion-GPCRs are by far the most poorly understood GPCR class. Adhesion-GPCRs possess a unique molecular structure, with extended N-termini containing various adhesion domains. In addition, many adhesion-GPCRs are autoproteolytically cleaved into an N-terminal fragment (NTF, NT, α-subunit) and C-terminal fragment (CTF, CT, β-subunit) at a conserved GPCR autoproteolysis-inducing (GAIN) domain that contains a GPCR proteolysis site (GPS). These two features distinguish adhesion-GPCRs from other GPCR classes. Though active research on adhesion-GPCRs in diverse areas, such as immunity, neuroscience, and development and tumor biology has been intensified in the recent years, the general biological and pharmacological properties of adhesion-GPCRs are not well known, and they have not yet been used for biomedical purposes. The "6th International Adhesion-GPCR Workshop," held at the Institute of Physiology of the University of Würzburg on September 6-8, 2012, assembled a majority of the investigators currently actively pursuing research on adhesion-GPCRs, including scientists from laboratories in Europe, the United States, and Asia. The meeting featured the nascent mechanistic understanding of the molecular events driving the signal transduction of adhesion-GPCRs, novel models to evaluate their functions, and evidence for their involvement in human disease. © 2012 New York Academy of Sciences.

  16. Zn-doped etch-and-rinse model dentin adhesives: Dentin bond integrity, biocompatibility, and properties.

    Science.gov (United States)

    Barcellos, Daphne Câmara; Fonseca, Beatriz Maria; Pucci, César Rogério; Cavalcanti, Bruno das Neves; Persici, Erasmo De Souza; Gonçalves, Sérgio Eduardo de Paiva

    2016-07-01

    This study assessed a 6 month resin/dentin bond's durability and cytotoxic effect of Zn-doped model dentin adhesives. The mechanical and physicochemical properties were also tested. A model etch-and-rinse single-bottle adhesive was formulated (55wt.% Bis-GMA, 45wt.% HEMA, 0.5wt.% CQ, 0.5wt.% DMAEMA) and Zinc methacrylate (Zn-Mt) or ZnO nanoparticles (ZnOn) were added to the model's adhesive, resulting in three groups: Group Control (control model adhesive); Group Zn-Mt (1wt.% Zn-Mt incorporated to adhesive) and Group ZnOn (1wt.% ZnOn incorporated to adhesive). The microtensile bond strength (mTBS) was assessed after 24h or 6 months in water storage. Mechanical properties (diametral tensile strength/DTS, flexural strength/FS, flexural modulus/FM, resilience modulus/RM, and compressive strength/CS) and physicochemical properties (polymerization shrinkage/PS, contact angle/CA, water sorption/WS, and water solubility/WS) were also tested. Cytotoxicity was evaluated with SRB biochemical assay. No significant difference in the DTS, FS, FM, CS, CA, WS, and WS were found when 1% of ZnOn or Zn-Mt was added to the model dentin adhesive. Group Zn-Mt decreased the RM of adhesive. Groups Zn-Mt and ZnOn decreased the PS of adhesives. Group ZnOn reduced the cytotoxicity of adhesive. Group ZnOn preserved mTBS after 6 months storage without degradation areas as seen by SEM analysis. The 1wt.% ZnOn may preserve the integrity of the hybrid layer and may reduce cytotoxicity and polymerization shrinkage of model dentin adhesive. The addition of Zn-Mt to the adhesive had no beneficial effects. Copyright © 2016 The Academy of Dental Materials. All rights reserved.

  17. An Elmo-Dock complex locally controls Rho GTPases and actin remodeling during cadherin-mediated adhesion.

    Science.gov (United States)

    Toret, Christopher P; Collins, Caitlin; Nelson, W James

    2014-12-08

    Cell-cell contact formation is a dynamic process requiring the coordination of cadherin-based cell-cell adhesion and integrin-based cell migration. A genome-wide RNA interference screen for proteins required specifically for cadherin-dependent cell-cell adhesion identified an Elmo-Dock complex. This was unexpected as Elmo-Dock complexes act downstream of integrin signaling as Rac guanine-nucleotide exchange factors. In this paper, we show that Elmo2 recruits Dock1 to initial cell-cell contacts in Madin-Darby canine kidney cells. At cell-cell contacts, both Elmo2 and Dock1 are essential for the rapid recruitment and spreading of E-cadherin, actin reorganization, localized Rac and Rho GTPase activities, and the development of strong cell-cell adhesion. Upon completion of cell-cell adhesion, Elmo2 and Dock1 no longer localize to cell-cell contacts and are not required subsequently for the maintenance of cell-cell adhesion. These studies show that Elmo-Dock complexes are involved in both integrin- and cadherin-based adhesions, which may help to coordinate the transition of cells from migration to strong cell-cell adhesion. © 2014 Toret et al.

  18. Poly(vinyl alcohol) acetoacetate-based tissue adhesives are non-cytotoxic and non-inflammatory.

    Science.gov (United States)

    Bhatia, Sujata K; Arthur, Samuel D

    2008-08-01

    Polymer-based tissue adhesives composed of poly(vinyl alcohol) acetoacetate (PVOH acac) and cross-linking amines were investigated for their effects on cell survival and inflammatory cell activation using in vitro mouse cell cultures. Cytotoxicity of tissue adhesives was evaluated by placing adhesives in direct contact with 3T3 fibroblast cells. Tissue adhesives formulated from PVOH acac and 3-aminopropyltrialkoxysilane (APS) were non-cytotoxic to fibroblasts; adhesives formulated from PVOH acac and aminated poly(vinyl alcohol) (PVOH amine) were also non-cytotoxic to fibroblasts. In contrast, a commercial adhesive composed of 2-octyl cyanoacrylate was highly cytotoxic to fibroblasts. The inflammatory potential of tissue adhesives was evaluated by exposing J774 macrophage cells to adhesives, and measuring TNF-alpha release from macrophages. PVOH acac-based tissue adhesives did not elicit inflammatory TNF-alpha release from macrophages. These results suggest that PVOH acac-based tissue adhesives are non-cytotoxic and non-inflammatory. Such tissue adhesives represent a promising technology for a variety of medical applications, including surgical wound closure and tissue engineering, and the results are also significant in the design of in vitro cell culture systems to study biomaterials.

  19. Effect of leaning angle of gecko-inspired slanted polymer nanohairs on dry adhesion

    KAUST Repository

    Jeong, Hoon Eui

    2010-01-01

    We present analysis of adhesion properties of angled polymer nanohairs with a wide range of leaning angles from 0° to 45° and ultraviolet (UV)-curable polyurethane acrylate (PUA) materials of two different elastic moduli (19.8 and 320 MPa). It is demonstrated that shear adhesion and adhesion hysteresis can be greatly enhanced by increasing the leaning angle of nanohairs both for soft and hard materials due to increased contact area and reduced structural stiffness. © 2010 American Institute of Physics.

  20. Nanoscale E-Cadherin ligand patterns show threshold size for cellular adhesion and adherence junction formation

    DEFF Research Database (Denmark)

    Kristensen, Stine H; Pedersen, Gitte Albinus; Nejsum, Lene Niemann

    2012-01-01

    of adherence junctions in epithelial cells. Cells at 100 nm patterns show poor adhesion, while larger pattern sizes show both good adhesion, significant spreading and defined cortical actin. We estimate a threshold of 0.03μm2 for epithelial cellular attachment via E-Cadherin......The role of ligand spatial distribution on the formation of cadherin mediated cell-cell contacts is studied utilizing nanopatterns of E-cadherin ligands. Protein patches ranging in size from 100 nm to 800 nm prepared by colloidal lithography critically influence adhesion, spreading and formation...

  1. Modeling and design optimization of adhesion between surfaces at the microscale.

    Energy Technology Data Exchange (ETDEWEB)

    Sylves, Kevin T. (University of Colorado, Boulder, CO)

    2008-08-01

    This research applies design optimization techniques to structures in adhesive contact where the dominant adhesive mechanism is the van der Waals force. Interface finite elements are developed for domains discretized by beam elements, quadrilateral elements or triangular shell elements. Example analysis problems comparing finite element results to analytical solutions are presented. These examples are then optimized, where the objective is matching a force-displacement relationship and the optimization variables are the interface element energy of adhesion or the width of beam elements in the structure. Several parameter studies are conducted and discussed.

  2. Dissipation in a Sheared Foam: From Bubble Adhesion to Foam Rheology

    Science.gov (United States)

    Besson, Sébastien; Debrégeas, Georges; Cohen-Addad, Sylvie; Höhler, Reinhard

    2008-11-01

    The link between the rheology of 3D aqueous foam and the adhesion of neighboring bubbles is tested by confronting experiments at two different length scales. On the one hand, the dynamics of adhesion are probed by measuring how the shape of two bubbles in contact changes as their center-to-center distance is modulated. On the other hand, the linear viscoelastic behavior of 3D foam prepared with the same soapy solution is characterized by its complex shear modulus. To connect the two sets of data, we present a model of foam viscoelasticity taking into account bubble adhesion.

  3. Citotoxicity evaluation of three dental adhesives on vero cells in vitro

    OpenAIRE

    Catunda, Raisa-Queiroz; Vieira, Jeymesson-Raphael-Cardoso; de Oliveira, Erwelly-Barros; da Silva, Eliete-Cavalcanti; Brasil, Veruska-Lima-Moura; Perez, Danyel-Elias-da Cruz

    2017-01-01

    Background To evaluate, in vitro, the potential cytotoxicity of three different dental adhesives systems (Adper Single Bond 2 -SB, Silorane System Adhesive Bond -SSAB and Single Bond Universal -SBU) on cultivated Vero cells after different contact times. Material and Methods The cells were cultured in a concentration of 2 x 105 cells/mL for 24h and grown to sub-confluent monolayers. VERO cells were exposed to 25?l of conditioned extracts obtained from 24h, 48h and 72h immersion of adhesive sa...

  4. The adhesion failure on the MEMS accelerator influenced by Relative humidity

    Science.gov (United States)

    2016-03-30

    method is found as early as 1950, studied by Bowden FP and Tabor D. It is applied in preventing cold welding adhesion of the gold ball, and achieved very...adhesion and friction experiment “[http:// cnls.lanl.gov/casimir/, 2009. [10]. He, C.Z., Zhang, G.Y., “Measurement of contact angle”, Journal of...Chemical, Vol.4, 1979,pp.41-43. [11]. Wang ,H. Y, Cai, L, Yang, D. H.” Adhesion/stiction and friction studies of nano/Micro-textured surfaces produced

  5. Dissipation in a sheared foam: from bubble adhesion to foam rheology.

    Science.gov (United States)

    Besson, Sébastien; Debrégeas, Georges; Cohen-Addad, Sylvie; Höhler, Reinhard

    2008-11-21

    The link between the rheology of 3D aqueous foam and the adhesion of neighboring bubbles is tested by confronting experiments at two different length scales. On the one hand, the dynamics of adhesion are probed by measuring how the shape of two bubbles in contact changes as their center-to-center distance is modulated. On the other hand, the linear viscoelastic behavior of 3D foam prepared with the same soapy solution is characterized by its complex shear modulus. To connect the two sets of data, we present a model of foam viscoelasticity taking into account bubble adhesion.

  6. Adhesion properties of catechol-based biodegradable amino acid-based poly(ester urea) copolymers inspired from mussel proteins.

    Science.gov (United States)

    Zhou, Jinjun; Defante, Adrian P; Lin, Fei; Xu, Ying; Yu, Jiayi; Gao, Yaohua; Childers, Erin; Dhinojwala, Ali; Becker, Matthew L

    2015-01-12

    Amino acid-based poly(ester urea) (PEU) copolymers functionalized with pendant catechol groups that address the need for strongly adhesive yet degradable biomaterials have been developed. Lap-shear tests with aluminum adherends demonstrated that these polymers have lap-shear adhesion strengths near 1 MPa. An increase in lap-shear adhesive strength to 2.4 MPa was achieved upon the addition of an oxidative cross-linker. The adhesive strength on porcine skin adherends was comparable with commercial fibrin glue. Interfacial energies of the polymeric materials were investigated via contact angle measurements and Johnson-Kendall-Roberts (JKR) technique. The JKR work of adhesion was consistent with contact angle measurements. The chemical and physical properties of PEUs can be controlled using different diols and amino acids, making the polymers candidates for the development of biological glues for use in clinical applications.

  7. Superhydrophobic gecko feet with high adhesive forces towards water and their bio-inspired materials

    Science.gov (United States)

    Liu, Kesong; Du, Jiexing; Wu, Juntao; Jiang, Lei

    2012-01-01

    Functional integration is an inherent characteristic for multiscale structures of biological materials. In this contribution, we first investigate the liquid-solid adhesive forces between water droplets and superhydrophobic gecko feet using a high-sensitivity micro-electromechanical balance system. It was found, in addition to the well-known solid-solid adhesion, the gecko foot, with a multiscale structure, possesses both superhydrophobic functionality and a high adhesive force towards water. The origin of the high adhesive forces of gecko feet to water could be attributed to the high density nanopillars that contact the water. Inspired by this, polyimide films with gecko-like multiscale structures were constructed by using anodic aluminum oxide templates, exhibiting superhydrophobicity and a strong adhesive force towards water. The static water contact angle is larger than 150° and the adhesive force to water is about 66 μN. The resultant gecko-inspired polyimide film can be used as a ``mechanical hand'' to snatch micro-liter liquids. We expect this work will provide the inspiration to reveal the mechanism of the high-adhesive superhydrophobic of geckos and extend the practical applications of polyimide materials.

  8. Superhydrophobic gecko feet with high adhesive forces towards water and their bio-inspired materials.

    Science.gov (United States)

    Liu, Kesong; Du, Jiexing; Wu, Juntao; Jiang, Lei

    2012-02-07

    Functional integration is an inherent characteristic for multiscale structures of biological materials. In this contribution, we first investigate the liquid-solid adhesive forces between water droplets and superhydrophobic gecko feet using a high-sensitivity micro-electromechanical balance system. It was found, in addition to the well-known solid-solid adhesion, the gecko foot, with a multiscale structure, possesses both superhydrophobic functionality and a high adhesive force towards water. The origin of the high adhesive forces of gecko feet to water could be attributed to the high density nanopillars that contact the water. Inspired by this, polyimide films with gecko-like multiscale structures were constructed by using anodic aluminum oxide templates, exhibiting superhydrophobicity and a strong adhesive force towards water. The static water contact angle is larger than 150° and the adhesive force to water is about 66 μN. The resultant gecko-inspired polyimide film can be used as a "mechanical hand" to snatch micro-liter liquids. We expect this work will provide the inspiration to reveal the mechanism of the high-adhesive superhydrophobic of geckos and extend the practical applications of polyimide materials. This journal is © The Royal Society of Chemistry 2012

  9. Rate-dependent frictional adhesion in natural and synthetic gecko setae

    Science.gov (United States)

    Gravish, Nick; Wilkinson, Matt; Sponberg, Simon; Parness, Aaron; Esparza, Noe; Soto, Daniel; Yamaguchi, Tetsuo; Broide, Michael; Cutkosky, Mark; Creton, Costantino; Autumn, Kellar

    2010-01-01

    Geckos owe their remarkable stickiness to millions of dry, hard setae on their toes. In this study, we discovered that gecko setae stick more strongly the faster they slide, and do not wear out after 30 000 cycles. This is surprising because friction between dry, hard, macroscopic materials typically decreases at the onset of sliding, and as velocity increases, friction continues to decrease because of a reduction in the number of interfacial contacts, due in part to wear. Gecko setae did not exhibit the decrease in adhesion or friction characteristic of a transition from static to kinetic contact mechanics. Instead, friction and adhesion forces increased at the onset of sliding and continued to increase with shear speed from 500 nm s−1 to 158 mm s−1. To explain how apparently fluid-like, wear-free dynamic friction and adhesion occur macroscopically in a dry, hard solid, we proposed a model based on a population of nanoscopic stick–slip events. In the model, contact elements are either in static contact or in the process of slipping to a new static contact. If stick–slip events are uncorrelated, the model further predicted that contact forces should increase to a critical velocity (V*) and then decrease at velocities greater than V*. We hypothesized that, like natural gecko setae, but unlike any conventional adhesive, gecko-like synthetic adhesives (GSAs) could adhere while sliding. To test the generality of our results and the validity of our model, we fabricated a GSA using a hard silicone polymer. While sliding, the GSA exhibited steady-state adhesion and velocity dependence similar to that of gecko setae. Observations at the interface indicated that macroscopically smooth sliding of the GSA emerged from randomly occurring stick–slip events in the population of flexible fibrils, confirming our model predictions. PMID:19493896

  10. Rate-dependent frictional adhesion in natural and synthetic gecko setae.

    Science.gov (United States)

    Gravish, Nick; Wilkinson, Matt; Sponberg, Simon; Parness, Aaron; Esparza, Noe; Soto, Daniel; Yamaguchi, Tetsuo; Broide, Michael; Cutkosky, Mark; Creton, Costantino; Autumn, Kellar

    2010-02-06

    Geckos owe their remarkable stickiness to millions of dry, hard setae on their toes. In this study, we discovered that gecko setae stick more strongly the faster they slide, and do not wear out after 30,000 cycles. This is surprising because friction between dry, hard, macroscopic materials typically decreases at the onset of sliding, and as velocity increases, friction continues to decrease because of a reduction in the number of interfacial contacts, due in part to wear. Gecko setae did not exhibit the decrease in adhesion or friction characteristic of a transition from static to kinetic contact mechanics. Instead, friction and adhesion forces increased at the onset of sliding and continued to increase with shear speed from 500 nm s(-1) to 158 mm s(-1). To explain how apparently fluid-like, wear-free dynamic friction and adhesion occur macroscopically in a dry, hard solid, we proposed a model based on a population of nanoscopic stick-slip events. In the model, contact elements are either in static contact or in the process of slipping to a new static contact. If stick-slip events are uncorrelated, the model further predicted that contact forces should increase to a critical velocity (V*) and then decrease at velocities greater than V*. We hypothesized that, like natural gecko setae, but unlike any conventional adhesive, gecko-like synthetic adhesives (GSAs) could adhere while sliding. To test the generality of our results and the validity of our model, we fabricated a GSA using a hard silicone polymer. While sliding, the GSA exhibited steady-state adhesion and velocity dependence similar to that of gecko setae. Observations at the interface indicated that macroscopically smooth sliding of the GSA emerged from randomly occurring stick-slip events in the population of flexible fibrils, confirming our model predictions.

  11. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... People, Real Problems with Colored Contact Lenses Julian: Teenager Blinded In One Eye By Non-Prescription Contact ... the United States. Gene Therapy May Be a Game-Changer for People With ... Professionals Link your website to EyeSmart Embed EyeSmart videos on your website Promotional materials for eye health ...

  12. Colored Contact Lens Dangers

    Science.gov (United States)

    ... People, Real Problems with Colored Contact Lenses Julian: Teenager Blinded In One Eye By Non-Prescription Contact ... the United States. Gene Therapy May Be a Game-Changer for People With ... Professionals Link your website to EyeSmart Embed EyeSmart videos on your website Promotional materials for eye health ...

  13. Contact Hamiltonian mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Bravetti, Alessandro, E-mail: alessandro.bravetti@iimas.unam.mx [Instituto de Investigaciones en Matemáticas Aplicadas y en Sistemas, Universidad Nacional Autónoma de México, A. P. 70543, México, DF 04510 (Mexico); Cruz, Hans, E-mail: hans@ciencias.unam.mx [Instituto de Ciencias Nucleares, Universidad Nacional Autónoma de México, A. P. 70543, México, DF 04510 (Mexico); Tapias, Diego, E-mail: diego.tapias@nucleares.unam.mx [Facultad de Ciencias, Universidad Nacional Autónoma de México, A.P. 70543, México, DF 04510 (Mexico)

    2017-01-15

    In this work we introduce contact Hamiltonian mechanics, an extension of symplectic Hamiltonian mechanics, and show that it is a natural candidate for a geometric description of non-dissipative and dissipative systems. For this purpose we review in detail the major features of standard symplectic Hamiltonian dynamics and show that all of them can be generalized to the contact case.

  14. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... in Cleveland. "This is far from the truth." Real People, Real Problems with Colored Contact Lenses Julian: Teenager Blinded ... use of colored contact lenses , from the U.S. Food and Drug Administration (FDA). Are the colored lenses ...

  15. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... level of care or consideration as a standard contact lens because they can be purchased over-the-counter ... Teenager Blinded In One Eye By Non-Prescription Contact Lens Laura: Vision Loss After Just 10 Hours Robyn: ...

  16. African Zoology: Contact

    African Journals Online (AJOL)

    Principal Contact. Lester Isaacs Phone: +27466229698. Fax: +2746 622 9550. Email: lester@nisc.co.za. Support Contact. NISC office. Email: info@nisc.co.za. ISSN: 2224-073X. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners ...

  17. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Global Ophthalmology Guide Eye Health Find an Ophthalmologist Academy Store Eye Health A-Z Symptoms Glasses & Contacts Tips & Prevention News ... videos on your website Promotional materials for eye health observances EyeSmart resources are also available in Spanish . Follow The ... Public & Patients: Contact ...

  18. Animal Research International: Contact

    African Journals Online (AJOL)

    Principal Contact. Dr. J. E. Eyo Dr. Department of Zoology, University of Nig Department of Zoology, POBox 3146, University of Nigeria, Nsukka, Enugu State, Nigeria. Phone: 234 42 308030. Email: joseph.eyo@unn.edu.ng. Support Contact. N. S. Oluah Phone: +234-83732127. Email: ndubusioluah@yahoo.com.

  19. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... medical attention from an ophthalmologist. Related resources: Learn how to properly care for contact lenses . Learn about the ... FDA's database of approved contact lenses . Related Stories How long does it take the eye to go back to its original shape after wearing ...

  20. Zimbabwe Science News: Contact

    African Journals Online (AJOL)

    Principal Contact. Prof. S Feresu Editor P.O. Box CY 124 Causeway, Harare, Zimbabwe Email: feresu@ies.uz.ac.zw. Support Contact. Prof. S Feresu Email: feresu@ies.uz.ac.zw. ISSN: 1016-1503. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL ...

  1. Glasses and Contact Lenses

    Science.gov (United States)

    ... really fun part of new glasses or contact lenses is how well you can see. They can make your whole world look better! Reviewed by: Jonathan H. Salvin, ... Abrasions Why Do Eyes Water? What It's Like to Be Color Blind Contact ...

  2. Contact Lens Risks

    Science.gov (United States)

    ... any lens solution. Do not expose your contact lenses to any water: tap, bottled, distilled, lake or ocean water. Never ... resistant to treatment and cure. Remove your contact lenses before swimming. ... in swimming pool water, hot tubs, lakes and the ocean Replace your ...

  3. Nigerian Food Journal: Contact

    African Journals Online (AJOL)

    Nigerian Food Journal. ... Nigerian Food Journal: Contact. Journal Home > About the Journal > Nigerian Food Journal: Contact. Log in or Register to get access to full text downloads. ... Mailing Address. Department of Food Science and Technology University of Agriculture, Makurdi, Nigeria ...

  4. Contact Hamiltonian Mechanics

    OpenAIRE

    Bravetti, Alessandro; Cruz, Hans; Tapias, Diego

    2016-01-01

    In this work we introduce contact Hamiltonian mechanics, an extension of symplectic Hamiltonian mechanics, and show that it is a natural candidate for a geometric description of non-dissipative and dissipative systems. For this purpose we review in detail the major features of standard symplectic Hamiltonian dynamics and show that all of them can be generalized to the contact case.

  5. Sciences & Nature: Contact

    African Journals Online (AJOL)

    Principal Contact. Ehouan Etienne Ehile Professor University of Abobo-Adjamé 02 BP 801 Abidjan 02. Phone: (+225) 2030 4201. Fax: (+225) 2030 4203. Email: eh_ehile@yahoo.fr. Support Contact. Irie Zoro Bi Email: banhiakalou@yahoo.fr. ISSN: 1812-0741. AJOL African Journals Online. HOW TO USE AJOL.

  6. LBS Management Review: Contact

    African Journals Online (AJOL)

    Principal Contact. Dr Obinna Muogboh Managing Editor Lagos Business School Pan African University 2 Ahmed Onibudo Street, P.O. Box 73688, Victoria Island, Lagos, NIGERIA Email: omuogboh@lbs.edu.ng. Support Contact. Editor Email: omuogboh@lbs.edu.ng. ISSN: 1118-3713. AJOL African Journals Online.

  7. Africa Insight: Contact

    African Journals Online (AJOL)

    Principal Contact. Mmakwena Chipu Assistant Editor: Publications Africa Institute of South Africa. Human Sciences Research Council. Private Bag X41. Pretoria. 0001. South Africa. Phone: +27 12 316 9762. Email: mchipu@hsrc.ac.za. Support Contact. Rosemary Lepule Phone: +27 12 316 9743. Email: rlepule@hsrc.ac.za.

  8. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Halloween Hazard: The Hidden Dangers of Buying Decorative Contact Lenses Without a Prescription Leer en Español: Peligros asociados ... the truth." Real People, Real Problems with Colored Contact Lenses Julian: Teenager Blinded In One Eye By Non- ...

  9. African Health Sciences: Contact

    African Journals Online (AJOL)

    Principal Contact. Dr James Tumwine Editor-in-Chief. Makerere University Medical School P. O. Box 7072 Kampala Uganda. Phone: 256-41-530020/1. Email: kabaleimc@gmail.com. Support Contact. Pauline Salamula Email: paulinesalamula@gmail.com. ISSN: 1680-6905. AJOL African Journals Online. HOW TO USE ...

  10. Factor XII Contact Activation.

    Science.gov (United States)

    Naudin, Clément; Burillo, Elena; Blankenberg, Stefan; Butler, Lynn; Renné, Thomas

    2017-11-01

    Contact activation is the surface-induced conversion of factor XII (FXII) zymogen to the serine protease FXIIa. Blood-circulating FXII binds to negatively charged surfaces and this contact to surfaces triggers a conformational change in the zymogen inducing autoactivation. Several surfaces that have the capacity for initiating FXII contact activation have been identified, including misfolded protein aggregates, collagen, nucleic acids, and platelet and microbial polyphosphate. Activated FXII initiates the proinflammatory kallikrein-kinin system and the intrinsic coagulation pathway, leading to formation of bradykinin and thrombin, respectively. FXII contact activation is well characterized in vitro and provides the mechanistic basis for the diagnostic clotting assay, activated partial thromboplastin time. However, only in the past decade has the critical role of FXII contact activation in pathological thrombosis been appreciated. While defective FXII contact activation provides thromboprotection, excess activation underlies the swelling disorder hereditary angioedema type III. This review provides an overview of the molecular basis of FXII contact activation and FXII contact activation-associated disease states. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  11. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... from the truth." Real People, Real Problems with Colored Contact Lenses Julian: Teenager Blinded In One Eye By Non- ... Safety In fact, it is illegal to sell colored contact lenses without a prescription in the United States. All ...

  12. Structural adhesives directory and databook

    CERN Document Server

    Wilson, Jo

    1996-01-01

    A worldwide directory of commercially available adhesive products for use in a wide range of engineering disciplines. Along with product names and suppliers, basic property data are tabulated and cross-referenced. The book is subdivided according to class of adhesive, with introductions to each class followed by comparison tables and datasheets for each adhesive. The datasheets contain detailed information, from product codes to environmental properties and are therefore of interest across a broad readership. Standardized data will aid the user in cross-comparison between different manufacturers and in easily identifying the required information.

  13. Adhesives from modified soy protein

    Science.gov (United States)

    Sun, Susan [Manhattan, KS; Wang, Donghai [Manhattan, KS; Zhong, Zhikai [Manhattan, KS; Yang, Guang [Shanghai, CN

    2008-08-26

    The present invention provides useful adhesive compositions having similar adhesive properties to conventional UF and PPF resins. The compositions generally include a protein portion and modifying ingredient portion selected from the group consisting of carboxyl-containing compounds, aldehyde-containing compounds, epoxy group-containing compounds, and mixtures thereof. The composition is preferably prepared at a pH level at or near the isoelectric point of the protein. In other preferred forms, the adhesive composition includes a protein portion and a carboxyl-containing group portion.

  14. A local adhesive finger splint.

    Science.gov (United States)

    Macionis, V

    2001-09-01

    A new design of a local static finger splint is proposed. The splint is made by enveloping a length of wire into double-sided adhesive tape. The skin of the region to be immobilized is covered with an adhesive skin dressing, to which the splint is then adhered. This method of attachment gives more freedom in choosing a site of splint application and prevents access obstruction to the wound, blocking of tactile areas, and circulation impairment. The splint is light, low profile, and malleable at ambient temperature. The adhesive splint was used in 5 patients to maintain the first web space open or to immobilize stiff interphalangeal joints in flexion overnight.

  15. Contact Lenses - A Review

    Directory of Open Access Journals (Sweden)

    Dada V

    1987-01-01

    Full Text Available A review of recent literature on contact lenses shows increasingly more studies on soft contact lenses than PMMA hard lenses The articles on contact lens wear and ulcerative keratitis have highlighted the increased risk of microbial keratitis in contact lens wearers compared to the general population, higher virulence of pathogens isolated and special association of fungi with EWSCL This high risk is due to multiple factors, organism survival in moist lens cases and cleaning solutions, microtrauma to the corneal epithelium by repeated insertion and removal, corneal hypoxia and lens deposits in soft lenses Special problems of tonometry in eyes with bandage soft lenses and contact lens sterilization have been studied and useful suggestions have come forth from the authors

  16. Contact materials for nanoelectronics

    KAUST Repository

    Alshareef, Husam N.

    2011-02-01

    In this article, we review current research activities in contact material development for electronic and nanoelectronic devices. A fundamental issue in contact materials research is to understand and control interfacial reactions and phenomena that modify the expected device performance. These reactions have become more challenging and more difficult to control as new materials have been introduced and as device sizes have entered the deep nanoscale. To provide an overview of this field of inquiry, this issue of MRS Bulletin includes articles on gate and contact materials for Si-based devices, junction contact materials for Si-based devices, and contact materials for alternate channel substrates (Ge and III-V), nanodevices. © 2011 Materials Research Society.

  17. Intergroup contact theory.

    Science.gov (United States)

    Pettigrew, T F

    1998-01-01

    Allport specified four conditions for optimal intergroup contact: equal group status within the situation, common goals, intergroup cooperation and authority support. Varied research supports the hypothesis, but four problems remain. 1. A selection bias limits cross-sectional studies, since prejudiced people avoid intergroup contact. Yet research finds that the positive effects of cross-group friendship are larger than those of the bias. 2. Writers overburden the hypothesis with facilitating, but not essential, conditions. 3. The hypothesis fails to address process. The chapter proposes four processes: learning about the outgroup, changed behavior, affective ties, and ingroup reappraisal. 4. The hypothesis does not specify how the effects generalize to other situations, the outgroup or uninvolved outgroups. Acting sequentially, three strategies enhance generalization-decategorization, salient categorization, and recategorization. Finally, both individual differences and societal norms shape intergroup contact effects. The chapter outlines a longitudinal intergroup contact theory. It distinguishes between essential and facilitating factors, and emphasizes different outcomes for different stages of contact.

  18. Bacterial endotoxin adhesion to different types of orthodontic adhesives

    Directory of Open Access Journals (Sweden)

    Priscilla Coutinho ROMUALDO

    Full Text Available Abstract Bacterial endotoxin (LPS adhesion to orthodontic brackets is a known contributing factor to inflammation of the adjacent gingival tissues. Objective The aim of this study was to assess whether LPS adheres to orthodontic adhesive systems, comparing two commercial brands. Material and Methods Forty specimens were fabricated from Transbond XT and Light Bond composite and bonding agent components (n=10/component, then contaminated by immersion in a bacterial endotoxin solution. Contaminated and non-contaminated acrylic resin samples were used as positive and negative control groups, respectively. LPS quantification was performed by the Limulus Amebocyte Lysate QCL-1000™ test. Data obtained were scored and subjected to the Chi-square test using a significance level of 5%. Results There was endotoxin adhesion to all materials (p0.05. There was no significant difference (p>0.05 among commercial brands. Affinity of endotoxin was significantly greater for the bonding agents (p=0.0025. Conclusions LPS adhered to both orthodontic adhesive systems. Regardless of the brand, the endotoxin had higher affinity for the bonding agents than for the composites. There is no previous study assessing the affinity of LPS for orthodontic adhesive systems. This study revealed that LPS adheres to orthodontic adhesive systems. Therefore, additional care is recommended to orthodontic applications of these materials.

  19. Dependency of micro particle adhesion of dispersive and nondispersive interactions analyzed by atomic force microscopy

    CERN Document Server

    Kawal, A; Andoh, E

    1999-01-01

    The adhesion behaviour of a micro semi-sphere tip (radius of curvature of 18 nm) after making contact with various inorganic solid surfaces is analyzed. Measurement force by the AFM tip corresponds to the interactive force estimated $9 using surface energy components, dispersion and nondispersion, based on van der Waal's interaction. These components can be obtained by measuring the contact angle of standard liquids on a material surface. By using two kinds of tip $9 with different component values, analysis of the interactive mechanism and prediction of macro tip (particle) adhesion can be made. (6 refs).

  20. Reduction of water surface tension significantly impacts gecko adhesion underwater.

    Science.gov (United States)

    Stark, Alyssa Y; McClung, Brandon; Niewiarowski, Peter H; Dhinojwala, Ali

    2014-12-01

    The gecko adhesive system is dependent on weak van der Waals interactions that are multiplied across thousands of fine hair-like structures (setae) on geckos' toe pads. Due to the requirements of van der Waals forces, we expect that any interruption between the setae and substrate, such as a water layer, will compromise adhesion. Our recent results suggest, however, that the air layer (plastron) surrounding the superhydrophobic toe pads aid in expelling water at the contact interface and create strong shear adhesion in water when in contact with hydrophobic surfaces. To test the function of the air plastron, we reduced the surface tension of water using two surfactants, a charged anionic surfactant and a neutral nonionic surfactant. We tested geckos on three substrates: hydrophilic glass and two hydrophobic surfaces, glass with a octadecyl trichlorosilane self-assembled monolayer (OTS-SAM) and polytetrafluoroethylene (PTFE). We found that the anionic surfactant inhibited the formation of the air plastron layer and significantly reduced shear adhesion to all three substrates. Interestingly, the air plastron was more stable in the nonionic surfactant treatments than the anionic surfactant treatments and we found that geckos adhered better in the nonionic surfactant than in the anionic surfactant on OTS-SAM and PTFE but not on glass. Our results have implications for the evolution of a superhydrophobic toe pad and highlight some of the challenges faced in designing synthetic adhesives that mimic geckos' toes. © The Author 2014. Published by Oxford University Press on behalf of the Society for Integrative and Comparative Biology. All rights reserved. For permissions please email: journals.permissions@oup.com.

  1. Adhesive capsulitis: a review.

    Science.gov (United States)

    Ewald, Anthony

    2011-02-15

    Adhesive capsulitis is a common, yet poorly understood, condition causing pain and loss of range of motion in the shoulder. It can occur in isolation or concomitantly with other shoulder conditions (e.g., rotator cuff tendinopathy, bursitis) or diabetes mellitus. It is often self-limited, but can persist for years and may never fully resolve. The diagnosis is usually clinical, although imaging can help rule out other conditions. The differential diagnosis includes acromioclavicular arthropathy, autoimmune disease (e.g., systemic lupus erythematosus, rheumatoid arthritis), biceps tendinopathy, glenohumeral osteoarthritis, neoplasm, rotator cuff tendinopathy or tear (with or without impingement), and subacromial and subdeltoid bursitis. Several treatment options are commonly used, but few have high-level evidence to support them. Because the condition is often self-limited, observation and reassurance may be considered; however, this may not be acceptable to many patients because of the painful and debilitating nature of the condition. Nonsurgical treatments include analgesics (e.g., acetaminophen, nonsteroidal anti-inflammatory drugs), oral prednisone, and intra-articular corticosteroid injections. Home exercise regimens and physical therapy are often prescribed. Surgical treatments include manipulation of the joint under anesthesia and capsular release.

  2. Adhesion of blood platelets under flow to wettability gradient polyethylene surfaces made in a shielded gas plasma

    NARCIS (Netherlands)

    Spijker, HT; Busscher, HJ; Graaff, R; van Oeveren, W; Bos, R.R.M.

    2002-01-01

    Adhesion and activation of platelets are important steps in the thrombosis of blood after contact with a biomaterial surface and are governed, in part, by the wettability of the surface. Since most implanted devices are in contact with blood under flow conditions, it is important to study the effect

  3. Dennexin peptides modeled after the homophilic binding sites of the neural cell adhesion molecule (NCAM) promote neuronal survival, modify cell adhesion and impair spatial learning

    DEFF Research Database (Denmark)

    Køhler, Lene B; Christensen, Claus; Rossetti, Clara

    2010-01-01

    Neural cell adhesion molecule (NCAM)-mediated cell adhesion results in activation of intracellular signaling cascades that lead to cellular responses such as neurite outgrowth, neuronal survival, and modulation of synaptic activity associated with cognitive processes. The crystal structure...... of the immunoglobulin (Ig) 1-2-3 fragment of the NCAM ectodomain has revealed novel mechanisms for NCAM homophilic adhesion. The present study addressed the biological significance of the so called dense zipper formation of NCAM. Two peptides, termed dennexinA and dennexinB, were modeled after the contact interfaces...... between Ig1 and Ig3 and between Ig2 and Ig2, respectively, observed in the crystal structure. Although the two dennexin peptides differed in amino acid sequence, they both modulated cell adhesion, reflected by inhibition of NCAM-mediated neurite outgrowth. Both dennexins also promoted neuronal survival...

  4. 21 CFR 878.4010 - Tissue adhesive.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Tissue adhesive. 878.4010 Section 878.4010 Food... DEVICES GENERAL AND PLASTIC SURGERY DEVICES Surgical Devices § 878.4010 Tissue adhesive. (a) Tissue adhesive for the topical approximation of skin—(1) Identification. A tissue adhesive for the topical...

  5. Synaptic Cell Adhesion Proteins and Synaptogenesis in the Mammalian Central Nervous System

    Science.gov (United States)

    Brose, N.

    Synapses are asymmetric cell-cell contacts, typically formed between the presynaptic axon terminal of a "sending" nerve cell and the postsynaptic dendrite, the soma or - in some cases - the axon of a "receiving" one. The presynaptic axon terminal is specialized for the complex membrane trafficking mechanisms that underlie regulated secretion of neurotransmitter, while the postsynapse is uniquely specialized for signal transduction. Synaptogenesis, the formation of functional synapses, is the final step in the development of the central nervous system. In the mammalian brain it results in the establishment of a neural network, connecting some 1012 nerve cells with up to 1015 synapses. In principle, synaptogenesis takes place in two consecutive steps that are most likely mediated by cell adhesion molecules. First, an arriving axonal growth cone identifies its appropriate partner cell, creating an initial contact, and, second, specific axonal and dendritic protein components are recruited to this initial contact site, forming a functional synapse. Three cell adhesion systems have recently been shown to be specifically enriched at synaptic contacts: the cadherin/catenin system, the cadherinlike neuronal receptors, and the β-neurexin/neuroligin system. Components of all three cell adhesion systems have been localized to synaptic contacts using immunogold electron microscopy but are also present outside of synapses. The present short review discusses the possible role of these synaptic cell adhesion molecules in synaptogenesis.

  6. An Overview of Dental Adhesive Systems and the Dynamic Tooth-Adhesive Interface.

    Science.gov (United States)

    Bedran-Russo, Ana; Leme-Kraus, Ariene A; Vidal, Cristina M P; Teixeira, Erica C

    2017-10-01

    From the conception of resin-enamel adhesion to today's contemporary dental adhesive systems, clinicians are no longer afraid of exploring the many advantages brought by adhesive restorative concepts. To maximize the performance of adhesive-based restorative procedures, practitioners must be familiar with the mechanism of adhesion, clinical indications, proper handling, the inherent limitations of the materials and the biological challenges. This review provides an overview of the current status of restorative dental adhesives, their mechanism of adhesion, mechanisms of degradation of dental adhesive interfaces, how to maximize performance, and future trends in adhesive dentistry. Copyright © 2017 Elsevier Inc. All rights reserved.

  7. Bovicin HC5 and nisin reduce Staphylococcus aureus adhesion to polystyrene and change the hydrophobicity profile and Gibbs free energy of adhesion.

    Science.gov (United States)

    Pimentel-Filho, Natan de Jesus; Martins, Mayra Carla de Freitas; Nogueira, Guilherme Bicalho; Mantovani, Hilário Cuquetto; Vanetti, Maria Cristina Dantas

    2014-11-03

    Staphylococcus aureus is an opportunistic pathogen often multidrug-resistant that not only causes a variety of human diseases, but also is able to survive on biotic and abiotic surfaces through biofilm communities. The best way to inhibit biofilm establishment is to prevent cell adhesion. In the present study, subinhibitory concentrations of the bacteriocins bovicin HC5 and nisin were tested for their capability to interfere with the adhesion of S. aureus to polystyrene. Subinhibitory dosages of the bacteriocins reduced cell adhesion and this occurred probably due to changes in the hydrophobicity of the bacterial cell and polystyrene surfaces. After treatment with bovicin HC5 and nisin, the surfaces became more hydrophilic and the free energy of adhesion (∆G(adhesion)) between bacteria and the polystyrene surface was unfavorable. The transcriptional level of selected genes was assessed by RT-qPCR approach, revealing that the bacteriocins affected the expression of some important biofilm associated genes (icaD, fnbA, and clfB) and rnaIII, which is involved in the quorum sensing mechanism. The conditioning of food-contact surfaces with bacteriocins can be an innovative and powerful strategy to prevent biofilms in the food industry. The results are relevant for food safety as they indicate that bovicin HC5 and nisin can inhibit bacterial adhesion and consequent biofilm establishment, since cell adhesion precedes biofilm formation. Copyright © 2014 Elsevier B.V. All rights reserved.

  8. Telescopic vision contact lens

    Science.gov (United States)

    Tremblay, Eric J.; Beer, R. Dirk; Arianpour, Ashkan; Ford, Joseph E.

    2011-03-01

    We present the concept, optical design, and first proof of principle experimental results for a telescopic contact lens intended to become a visual aid for age-related macular degeneration (AMD), providing magnification to the user without surgery or external head-mounted optics. Our contact lens optical system can provide a combination of telescopic and non-magnified vision through two independent optical paths through the contact lens. The magnified optical path incorporates a telescopic arrangement of positive and negative annular concentric reflectors to achieve 2.8x - 3x magnification on the eye, while light passing through a central clear aperture provides unmagnified vision.

  9. Tuning cell adhesion on polymeric and nanocomposite surfaces: Role of topography versus superhydrophobicity

    Energy Technology Data Exchange (ETDEWEB)

    Zangi, Sepideh [Department of Chemical Engineering, Shahrood Branch, Islamic Azad University, P.O. Box 36155-163, Shahrood (Iran, Islamic Republic of); Hejazi, Iman [Department of Polymer Engineering & Color Technology, Amirkabir University of Technology, Tehran (Iran, Islamic Republic of); Seyfi, Javad, E-mail: Jseyfi@gmail.com [Department of Chemical Engineering, Shahrood Branch, Islamic Azad University, P.O. Box 36155-163, Shahrood (Iran, Islamic Republic of); Hejazi, Ehsan [Department of Clinical Nutrition and Dietetics, Faculty of Nutrition Sciences and Food Technology, Shahid Beheshti University of Medical Sciences, Tehran (Iran, Islamic Republic of); Khonakdar, Hossein Ali [Department of Polymer Engineering, Faculty of Engineering, South Tehran Branch, Islamic Azad University, P.O. Box 19585-466, Tehran (Iran, Islamic Republic of); Davachi, Seyed Mohammad [School of Chemical Engineering, University of Tehran, P.O. Box 11155-4563, Tehran (Iran, Islamic Republic of)

    2016-06-01

    Development of surface modification procedures which allow tuning the cell adhesion on the surface of biomaterials and devices is of great importance. In this study, the effects of different topographies and wettabilities on cell adhesion behavior of polymeric surfaces are investigated. To this end, an improved phase separation method was proposed to impart various wettabilities (hydrophobic and superhydrophobic) on polypropylene surfaces. Surface morphologies and compositions were characterized by scanning electron microscopy and X-ray photoelectron spectroscopy, respectively. Cell culture was conducted to evaluate the adhesion of 4T1 mouse mammary tumor cells. It was found that processing conditions such as drying temperature is highly influential in cell adhesion behavior due to the formation of an utterly different surface topography. It was concluded that surface topography plays a more significant role in cell adhesion behavior rather than superhydrophobicity since the nano-scale topography highly inhibited the cell adhesion as compared to the micro-scale topography. Such cell repellent behavior could be very useful in many biomedical devices such as those in drug delivery and blood contacting applications as well as biosensors. - Highlights: • A novel method is presented for fabrication of superhydrophobic surfaces. • The presence of nanoparticles in non-solvent bath notably promoted phase separation. • Topography had a more notable impact on cell adhesion than superhydrophobicity. • Nano-scale topographical features highly impeded cell adhesion on polymer surfaces.

  10. Biomimetic Hybrid Nanofiber Sheets Composed of RGD Peptide-Decorated PLGA as Cell-Adhesive Substrates.

    Science.gov (United States)

    Shin, Yong Cheol; Lee, Jong Ho; Kim, Min Jeong; Park, Ji Hoon; Kim, Sung Eun; Kim, Jin Su; Oh, Jin-Woo; Han, Dong-Wook

    2015-05-29

    In biomedical applications, there is a need for tissue engineering scaffolds to promote and control cellular behaviors, including adhesion, proliferation and differentiation. In particular, the initial adhesion of cells has a great influence on those cellular behaviors. In this study, we concentrate on developing cell-adhesive substrates applicable for tissue engineering scaffolds. The hybrid nanofiber sheets were prepared by electrospinning poly(lactic-co-glycolic acid) (PLGA) and M13 phage, which was genetically modified to enhance cell adhesion thru expressing RGD peptides on their surface. The RGD peptide is a specific motif of extracellular matrix (ECM) for integrin receptors of cells. RGD peptide-decorated PLGA (RGD-PLGA) nanofiber sheets were characterized by scanning electron microscopy, immunofluorescence staining, contact angle measurement and differential scanning calorimetry. In addition, the initial adhesion and proliferation of four different types of mammalian cells were determined in order to evaluate the potential of RGD-PLGA nanofiber sheets as cell-adhesive substrates. Our results showed that the hybrid nanofiber sheets have a three-dimensional porous structure comparable to the native ECM. Furthermore, the initial adhesion and proliferation of cells were significantly enhanced on RGD-PLGA sheets. These results suggest that biomimetic RGD-PLGA nanofiber sheets can be promising cell-adhesive substrates for application as tissue engineering scaffolds.

  11. Modeling cell adhesion and proliferation: a cellular-automata based approach.

    Science.gov (United States)

    Vivas, J; Garzón-Alvarado, D; Cerrolaza, M

    Cell adhesion is a process that involves the interaction between the cell membrane and another surface, either a cell or a substrate. Unlike experimental tests, computer models can simulate processes and study the result of experiments in a shorter time and lower costs. One of the tools used to simulate biological processes is the cellular automata, which is a dynamic system that is discrete both in space and time. This work describes a computer model based on cellular automata for the adhesion process and cell proliferation to predict the behavior of a cell population in suspension and adhered to a substrate. The values of the simulated system were obtained through experimental tests on fibroblast monolayer cultures. The results allow us to estimate the cells settling time in culture as well as the adhesion and proliferation time. The change in the cells morphology as the adhesion over the contact surface progress was also observed. The formation of the initial link between cell and the substrate of the adhesion was observed after 100 min where the cell on the substrate retains its spherical morphology during the simulation. The cellular automata model developed is, however, a simplified representation of the steps in the adhesion process and the subsequent proliferation. A combined framework of experimental and computational simulation based on cellular automata was proposed to represent the fibroblast adhesion on substrates and changes in a macro-scale observed in the cell during the adhesion process. The approach showed to be simple and efficient.

  12. Proteomic dataset of the sea urchin Paracentrotus lividus adhesive organs and secreted adhesive

    NARCIS (Netherlands)

    Lebesgue, Nicolas; da Costa, Gonçalo; Ribeiro, Raquel Mesquita; Ribeiro-Silva, Cristina; Martins, Gabriel G; Matranga, Valeria; Scholten, Arjen; Cordeiro, Carlos; Heck, Albert J R; Santos, Romana

    Sea urchins have specialized adhesive organs called tube feet, which mediate strong but reversible adhesion. Tube feet are composed by a disc, producing adhesive and de-adhesive secretions for substratum attachment, and a stem for movement. After detachment the secreted adhesive remains bound to the

  13. Cell adhesion assay to determine the interaction between NGL-3 with LAR cell adhesion molecules

    OpenAIRE

    sprotocols

    2015-01-01

    In the cell adhesion assay, two groups of cells expressing different cell adhesion molecules are mixed together to determine whether the adhesion molecules can interact with each other and whether their interaction mediates cell adhesion. We used this assay to determine the interaction of NGL-3 with other synaptic cell adhesion molecules including LAR.

  14. A nontransferring dry adhesive with hierarchical polymer nanohairs

    KAUST Repository

    Jeong, H. E.

    2009-03-20

    We present a simple yet robust method for fabricating angled, hierarchically patterned high-aspect-ratio polymer nanohairs to generate directionally sensitive dry adhesives. The slanted polymeric nanostructures were molded from an etched polySi substrate containing slanted nanoholes. An angled etching technique was developed to fabricate slanted nanoholes with flat tips by inserting an etch-stop layer of silicon dioxide. This unique etching method was equipped with a Faraday cage system to control the ion-incident angles in the conventional plasma etching system. The polymeric nanohairs were fabricated with tailored leaning angles, sizes, tip shapes, and hierarchical structures. As a result of controlled leaning angle and bulged flat top of the nanohairs, the replicated, slanted nanohairs showed excellent directional adhesion, exhibiting strong shear attachment (approximately 26 N/cm(2) in maximum) in the angled direction and easy detachment (approximately 2.2 N/cm(2)) in the opposite direction, with a hysteresis value of approximately 10. In addition to single scale nanohairs, monolithic, micro-nanoscale combined hierarchical hairs were also fabricated by using a 2-step UV-assisted molding technique. These hierarchical nanoscale patterns maintained their adhesive force even on a rough surface (roughness <20 microm) because of an increase in the contact area by the enhanced height of hierarchy, whereas simple nanohairs lost their adhesion strength. To demonstrate the potential applications of the adhesive patch, the dry adhesive was used to transport a large-area glass (47.5 x 37.5 cm(2), second-generation TFT-LCD glass), which could replace the current electrostatic transport/holding system with further optimization.

  15. Effect of hydrophilicity on the compatibility between a dual-curing resin cement and one-bottle simplified adhesives.

    Science.gov (United States)

    Chen, Liang; Suh, Byoung In

    2013-08-01

    To evaluate the effect of the hydrophilicity of adhesives on the compatibility between one-bottle simplified adhesives and a dual-curing resin cement. Three experimental and two commercial adhesives (All-Bond Universal, OptiBond Allin- One) with the same or similar pH and various degrees of hydrophilicity were tested in this study. Extracted human dentin was treated with each adhesive and bonded with a dual-curing resin cement (Duolink), which was either light cured or chemically (self) cured (n = 10). Shear bond strength was tested using the Ultradent jig method, and failure modes were determined using a stereomicroscope. Water contact angle (as a measure of hydrophilicity/-phobicity) was measured on a fully cured adhesive (n = 10). The data were analyzed statistically by ANOVA and Tukey's test. The quantitative relationship between the hydrophilicity and bond strength differences was analyzed (confidence level 95%). Among the experimental adhesives, differences in bond strengths between light-curing and self-curing modes were larger for the more hydrophilic adhesives. For the commercial adhesives, Optibond All-in-One had a lower contact angle than All-bond Universal (p Universal were 29.6 and 31.5, respectively (light cured), and 1.9 and 30.0, respectively (self-cured). Adhesive failure was a predominant mode for all adhesives except for All-Bond Universal. Regression analysis indicated a linear correlation between adhesives' hydrophilicity and bond strength differences (p adhesives were less compatible (larger bond strength differences between different curing modes) with this dual-curing resin cement. All-bond Universal is more hydrophobic than Optibond All-in-One and it is compatible with this self-/dual-curing resin cement.

  16. Influence of substrate modulus on gecko adhesion

    OpenAIRE

    Klittich, Mena R.; Wilson, Michael C.; Craig Bernard; Rochelle M. Rodrigo; Austin J. Keith; Niewiarowski, Peter H.; Ali Dhinojwala

    2017-01-01

    The gecko adhesion system fascinates biologists and materials scientists alike for its strong, reversible, glue-free, dry adhesion. Understanding the adhesion system?s performance on various surfaces can give clues as to gecko behaviour, as well as towards designing synthetic adhesive mimics. Geckos encounter a variety of surfaces in their natural habitats; tropical geckos, such as Gekko gecko, encounter hard, rough tree trunks as well as soft, flexible leaves. While gecko adhesion on hard su...

  17. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Hidden Dangers of Buying Decorative Contact Lenses Without a Prescription Leer en Español: Peligros asociados con los ... 2013 It started as an impulsive buy from a souvenir shop, but 10 hours after she first ...

  18. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... FDA's database of approved contact lenses . Related Stories Gene Therapy May Be a Game-Changer for People ... Eyes Aug 16, 2016 More Eye Health News Gene Therapy May Be a Game-Changer for People ...

  19. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... sell contacts without a prescription are breaking the law, and may be fined $11,000 per violation. " ... American Academy of Ophthalmology 2017 Our Sites EyeWiki International Society of Refractive Surgery * Required * First Name: * Last ...

  20. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... she said. "I now live with a corneal scar, vision damage and a drooping eyelid." To safely ... database of approved contact lenses . Related Stories Gene Therapy May Be a Game-Changer for People With ...

  1. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Multimedia Public & Patients: Contact Us About the Academy Jobs at the Academy Financial Relationships with Industry Medical Disclaimer Privacy Policy Terms of Service For Advertisers For Media Ophthalmology ...

  2. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... use of colored contact lenses , from the U.S. Food and Drug Administration (FDA). Are the colored lenses ... and Your Eyes Aug 16, 2016 More Eye Health News Gene Therapy May Be a Game-Changer ...

  3. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... about the members of the eye-care team . Consumer warning about the improper use of colored contact ... Eyes SEP 20, 2017 By Dan Gudgel A report published in a medical journal reinforces what that ...

  4. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... New Dry Eye Treatment is a Tear-Jerker JUL 21, 2017 By Susanne Medeiros Patients suffering from ... ointments. 27 Contact Lenses Found in Woman’s Eye JUL 17, 2017 By Susanne Medeiros and Beatrice Shelton ...

  5. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... medical attention from an ophthalmologist. Related resources: Learn how to properly care for contact lenses . Learn about ... People With Inherited Retinal Disease Oct 30, 2017 How long does it take the eye to go ...

  6. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Ophthalmology Guide Eye Health Find an Ophthalmologist Academy Store Eye Health A-Z Symptoms Glasses & Contacts Tips & ... salons, novelty shops or in pop-up Halloween stores are not FDA-approved and are being sold ...

  7. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... lentes de contacto de color Sep. 26, 2013 It started as an impulsive buy from a souvenir ... Can Ruin Vision Eye Makeup Safety In fact, it is illegal to sell colored contact lenses without ...

  8. Journal of Humanities: Contact

    African Journals Online (AJOL)

    Principal Contact. Dr. Japhet Bakuwa Copy and Production Editor Chancellor College Publications Journal of Humanities Chancellor College Publications PO Box 280 Zomba Malawi Email: jbakuwa@cc.ac.mw ...

  9. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Patient Stories Español Eye Health / News Halloween Hazard: The Hidden Dangers of Buying Decorative Contact Lenses Without a Prescription Leer en Español: Peligros asociados con los ...

  10. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... in beauty salons, novelty shops or in pop-up Halloween stores are not FDA-approved and are ... share contact lenses with another person. Get follow up exams with your eye care provider. If you ...

  11. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... use of colored contact lenses , from the U.S. Food and Drug Administration (FDA). Are the colored lenses you are ... With Inherited Retinal Disease Oct 30, 2017 How long does it take ...

  12. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Contact Lens-Related Eye Infections Mar 01, 2017 New Technology Helps the Legally Blind Be More Independent ... tech and from super cool to super gross. New treatment possibilities were a feel-good favorite. But ...

  13. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Eye By Non-Prescription Contact Lens Laura: Vision Loss After Just 10 Hours Robyn: Blurry Vision and ... Therapy Approved to Treat Rare Cause of Vision Loss DEC 21, 2017 By Dan Gudgel The U.S. ...

  14. Tomato contact dermatitis

    DEFF Research Database (Denmark)

    Paulsen, Evy; Christensen, Lars P; Andersen, Klaus Ejner

    2012-01-01

    The tomato plant (Solanum lycopersicum) is an important crop worldwide. Whereas immediate-type reactions to tomato fruits are well known, contact dermatitis caused by tomatoes or tomato plants is rarely reported. The aims of this study were to present new data on contact sensitization to tomato...... plants and review the literature on contact dermatitis caused by both plants and fruits. An ether extract of tomato plants made as the original oleoresin plant extracts, was used in aimed patch testing, and between 2005 and 2011. 8 of 93 patients (9%) tested positive to the oleoresin extracts....... This prevalence is in accordance with the older literature that reports tomato plants as occasional sensitizers. The same applies to tomato fruits, which, in addition, may cause protein contact dermatitis. The allergens of the plant are unknown, but both heat-stable and heat-labile constituents seem...

  15. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... lens. In Butler's case, the lenses caused an infection and left her with a corneal abrasion. "I ... lenses? Sep 13, 2017 Contact Lens-Related Eye Infections Mar 01, 2017 New Technology Helps the Legally ...

  16. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... sell contacts without a prescription are breaking the law, and may be fined $11,000 per violation. " ... Academy of Ophthalmology 2017 Our Sites EyeWiki International Society of Refractive Surgery * Required * First Name: * Last Name: ...

  17. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... had not been properly fitted by an eye care professional, the lenses stuck to my eye like ... lenses do not require the same level of care or consideration as a standard contact lens because ...

  18. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... for people to use colored contact lenses to enhance their costumes. From blood-drenched vampire eyes to ... Ophthalmologist Browse Answers Free Newsletter Get ophthalmologist-reviewed tips and information about eye health and preserving your ...

  19. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... The Academy Professionals: Education Guidelines News Multimedia Public & Patients: Contact Us About the Academy Jobs at the Academy Financial Relationships with Industry Medical Disclaimer Privacy Policy Terms of ...

  20. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... impulsive buy from a souvenir shop, but 10 hours after she first put in a pair of ... Contact Lens Laura: Vision Loss After Just 10 Hours Robyn: Blurry Vision and Daily Eye Drops After ...

  1. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... MD, professor of ophthalmology at Case Western Reserve University in Cleveland. "This is far from the truth." ... Multimedia Public & Patients: Contact Us About the Academy Jobs at the Academy Financial Relationships with Industry Medical ...

  2. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Hidden Dangers of Buying Decorative Contact Lenses Without a Prescription Leer en Español: Peligros asociados con los ... contacto de color Sep. 26, 2013 It started as an impulsive buy from a souvenir shop, but ...

  3. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Contact Lens-Related Eye Infections Mar 01, 2017 New Technology Helps the Legally Blind Be More Independent ... at bedtime, can significantly slow the progression o… New Dry Eye Treatment is a Tear-Jerker JUL ...

  4. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... contact lenses for Halloween or any time of year, follow these guidelines: Get an eye exam from a licensed eye care professional such as an ophthalmologist — an eye medical ...

  5. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... colored contact lenses to enhance their costumes. From blood-drenched vampire eyes to glow-in-the-dark ... properly fitted may scratch the eye or cause blood vessels to grow into the cornea. Even if ...

  6. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Health A-Z Symptoms Glasses & Contacts Tips & Prevention News Ask an Ophthalmologist Patient Stories Español Eye Health / News Halloween Hazard: The Hidden Dangers of Buying Decorative ...

  7. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... be purchased over-the-counter or on the Internet," says Thomas Steinemann, MD, professor of ophthalmology at ... ask for a prescription. There is no such thing as a "one size fits all" contact lens. ...

  8. Ergonomics SA: Contact

    African Journals Online (AJOL)

    Principal Contact. Mrs June McDougall. Rhodes University. Department of Human Kinetics and Ergonomics. P.O. Box 94. Rhodes University. Grahamstown. 6140. Phone: +27 46 6038471. Email: j.mcdougall@ru.ac.za ...

  9. Occupational Contact Dermatitis

    Directory of Open Access Journals (Sweden)

    Sasseville Denis

    2008-06-01

    Full Text Available Occupational contact dermatitis accounts for 90% of all cases of work-related cutaneous disorders. It can be divided into irritant contact dermatitis, which occurs in 80% of cases, and allergic contact dermatitis. In most cases, both types will present as eczematous lesions on exposed parts of the body, notably the hands. Accurate diagnosis relies on meticulous history taking, thorough physical examination, careful reading of Material Safety Data Sheets to distinguish between irritants and allergens, and comprehensive patch testing to confirm or rule out allergic sensitization. This article reviews the pathogenesis and clinical manifestations of occupational contact dermatitis and provides diagnostic guidelines and a rational approach to management of these often frustrating cases.

  10. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... by an eye care professional, the lenses stuck to my eye like a suction cup." Halloween is a popular time for people to use colored contact lenses to enhance their costumes. ...

  11. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Patient Stories Español Eye Health / News Halloween Hazard: The Hidden Dangers of Buying Decorative Contact Lenses Without ... been properly fitted by an eye care professional, the lenses stuck to my eye like a suction ...

  12. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... videos on your website Promotional materials for eye health observances EyeSmart resources are also available in Spanish . Follow The Academy Professionals: Education Guidelines News Multimedia Public & Patients: Contact Us About the Academy Jobs at ...

  13. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... colored contact lenses , from the U.S. Food and Drug Administration (FDA). Are the colored lenses you are ... from dry eye now have a completely new, drug-free alternative to lubricating eye drops and topical ...

  14. The impact of contact

    Science.gov (United States)

    Finney, B.

    1986-10-01

    Scenarios of the impact on human society of radio contact with an extraterrestrial civilization are presented. Some believe that contact with advanced extraterrestrials would quickly devastate the human spirit, while others believe that these super-intelligent beings would show the inhabitants of the earth how to live in peace. It is proposed that the possible existence of extraterrestrial civilizations and the development of means of studying and communicating with them need to be considered.

  15. Contact Lens Compliance

    OpenAIRE

    Jinabhai, A.

    2013-01-01

    Although contact lens-related complications are rare, and most are managed without any lasting side-effects, several reports have identified a variety of risk factors associated with lens wear complications. Among these risk factors, some are unalterable, such as age or gender. Others, however, are modifiable, for example, poor lens case hygiene or hand-washing and, therefore, can be targeted to maximise successful lens wear. This article reviews different aspects of contact lens non-compliance

  16. Influence of an oxygen-inhibited layer on enamel bonding of dental adhesive systems: surface free-energy perspectives.

    Science.gov (United States)

    Ueta, Hirofumi; Tsujimoto, Akimasa; Barkmeier, Wayne W; Oouchi, Hajime; Sai, Keiichi; Takamizawa, Toshiki; Latta, Mark A; Miyazaki, Masashi

    2016-02-01

    The influence of an oxygen-inhibited layer (OIL) on the shear bond strength (SBS) to enamel and surface free-energy (SFE) of adhesive systems was investigated. The adhesive systems tested were Scotchbond Multipurpose (SM), Clearfil SE Bond (CS), and Scotchbond Universal (SU). Resin composite was bonded to bovine enamel surfaces to determine the SBS, with and without an OIL, of adhesives. The SFE of cured adhesives with and without an OIL were determined by measuring the contact angles of three test liquids. There were no significant differences in the mean SBS of SM and CS specimens with or without an OIL; however, the mean SBS of SU specimens with an OIL was significantly higher than that of SU specimens without an OIL. For all three systems, the mean total SFE (γS), polarity force (γSp), and hydrogen bonding force (γSh) values of cured adhesives with an OIL were significantly higher than those of cured adhesives without an OIL. The results of this study indicate that the presence of an OIL promotes higher SBS of a single-step self-etch adhesive system, but not of a three-step or a two-step self-etch primer system. The SFE values of cured adhesives with an OIL were significantly higher than those without an OIL. The SFE characteristics of the OIL of adhesives differed depending on the type of adhesive. © 2015 Eur J Oral Sci.

  17. Hydrolytic stability of three-step etch-and-rinse adhesives in occlusal class-I cavities.

    Science.gov (United States)

    De Munck, Jan; Mine, Atsushi; Vivan Cardoso, Marcio; Van Landuyt, Kirsten L; Lührs, Anne-Katrin; Poitevin, André; Hanabusa, Masao; Kuboki, Takuo; Van Meerbeek, Bart

    2013-11-01

    A dental adhesive without small and hydrophilic monomers such as 2-hydroxyethyl methacrylate (HEMA) and triethylene glycol dimethacrylate (TEGDMA) would be beneficial in order to avoid contact allergies. However, these monomers are important to increase infiltration and polymerization of the adhesive. Therefore, the purpose of this study was to evaluate the bonding effectiveness and bond durability of a more hydrophobic and biocompatible adhesive as compared to a conventional three-step etch-and-rinse adhesive. Sixteen non-carious human third molars were used to determine the micro-tensile bond strength testing (μTBS) and interfacial ultrastructure by transmission electron microscopy (TEM) of the more hydrophobic cmf adhesive system (Saremco) adhesive as compared to the control OptiBond FL (Kerr). The more hydrophobic and biocompatible three-step etch-and-rinse adhesive was able to produce a reasonable short-time bonding effectiveness. In the long term, the collagen fibrils in the hybrid layer were not effectively protected and were prone to hydrolytic degradation. As a result, long-term bonding effectiveness of this novel adhesive was very low. Application of a more hydrophobic adhesive without altering the application procedure considerably results in a reduced durability of the created bond Omitting small and hydrophilic components from the adhesive formulation may impair the durability of your composite restoration.

  18. Micromechanical and surface adhesive properties of single saccharomyces cerevisiae cells

    Science.gov (United States)

    Farzi, Bahman; Cetinkaya, Cetin

    2017-09-01

    The adhesion and mechanical properties of a biological cell (e.g. cell membrane elasticity and adhesiveness) are often strong indicators for the state of its health. Many existing techniques for determining mechanical properties of cells require direct physical contact with a single cell or a group of cells. Physical contact with the cell can trigger complex mechanotransduction mechanisms, leading to cellular responses, and consequently interfering with measurement accuracy. In the current work, based on ultrasonic excitation and interferometric (optical) motion detection, a non-contact method for characterizing the adhesion and mechanical properties of single cells is presented. It is experimentally demonstrated that the rocking (rigid body) motion and internal vibrational resonance frequencies of a single saccharomyces cerevisiae (SC) (baker’s yeast) cell can be acquired with the current approach, and the Young’s modulus and surface tension of the cell membrane as well as surface adhesion energy can be extracted from the values of these acquired resonance frequencies. The detected resonance frequency ranges for single SC cells include a rocking (rigid body) frequency of 330  ±  70 kHz and two breathing resonance frequencies of 1.53  ±  0.12 and 2.02  ±  0.31 MHz. Based on these values, the average work-of-adhesion of SC cells on a silicon substrate in aqueous medium is extracted, for the first time, as WASC-Si=16.2+/- 3.8 mJ {{m}-2} . Similarly, the surface tension and the Young’s modulus of the SC cell wall are predicted as {{σ }SC}=0.16+/- 0.02 N {{m}-1} and {{E}SC}= 9.20  ±  2.80 MPa, respectively. These results are compared to those reported in the literature by utilizing various methods, and good agreements are found. The current approach eliminates the measurement inaccuracies associated with the physical contact. Exciting and detecting cell dynamics at micro-second time-scales is significantly faster than the

  19. Cold welding of organic light emitting diode: Interfacial and contact models

    Directory of Open Access Journals (Sweden)

    J. Asare

    2016-06-01

    Full Text Available This paper presents the results of an analytical and computational study of the contacts and interfacial fracture associated with the cold welding of Organic Light Emitting diodes (OLEDs. The effects of impurities (within the possible interfaces are explored for contacts and interfacial fracture between layers that are relevant to model OLEDs. The models are used to study the effects of adhesion, pressure, thin film layer thickness and dust particle modulus (between the contacting surfaces on contact profiles around impurities between cold-welded thin films. The lift-off stage of thin films (during cold welding is then modeled as an interfacial fracture process. A combination of adhesion and interfacial fracture theories is used to provide new insights for the design of improved contact and interfacial separation during cold welding. The implications of the results are discussed for the design and fabrication of cold welded OLED structures.

  20. Laser Surface Preparation for Adhesive Bonding of Aerospace Structural Composites

    Science.gov (United States)

    Belcher, M. A.; Wohl, C. J.; Hopkins, J. W.; Connell, J. W.

    2010-01-01

    Adhesive bonds are critical to the integrity of built-up structures. Disbonds can often be detected but the strength of adhesion between surfaces in contact is not obtainable without destructive testing. Typically the number one problem in a bonded structure is surface contamination, and by extension, surface preparation. Standard surface preparation techniques, including grit blasting, manual abrasion, and peel ply, are not ideal because of variations in their application. Etching of carbon fiber reinforced plastic (CFRP) panels using a neodymium-doped yttrium aluminum garnet (Nd:YAG) laser appears to be a highly precise and promising way to both clean a composite surface prior to bonding and provide a bond-promoting patterned surface akin to peel ply without the inherent drawbacks from the same (i.e., debris and curvature). CFRP surfaces prepared using laser patterns conducive to adhesive bonding were compared to typical pre-bonding surface treatments through optical microscopy, contact angle goniometry, and post-bonding mechanical testing.

  1. Contact lenses and acute exposure to ultraviolet radiation.

    Science.gov (United States)

    Cullen, A P; Dumbleton, K A; Chou, B R

    1989-06-01

    The eyes of twenty-three pigmented rabbits (weight approximately 2kg) were irradiated with a single dose of UVB (285 to 315 nm total bandpass at approximately 450 muW.cm-2 irradiance) for exposure times of 22s to 1680s. One group wore UV-transmitting soft contact lenses during exposure of one eye with the fellow eye serving as a control while another group wore a UV-absorbing lens on each eye with only one eye irradiated. UV-transmitting contact lenses did not affect the clinical response to UV exposure whereas the UV-absorbing contact lenses protected the corneas as could have been predicted by consideration of the absorption characteristics of the lenses at the experimental waveband. In no case was there any evidence of adhesion between the contact lens and the corneal epithelium.

  2. Blood coagulation and platelet adhesion on polyaniline films.

    Science.gov (United States)

    Humpolíček, Petr; Kuceková, Zdenka; Kašpárková, Věra; Pelková, Jana; Modic, Martina; Junkar, Ita; Trchová, Miroslava; Bober, Patrycja; Stejskal, Jaroslav; Lehocký, Marián

    2015-09-01

    Polyaniline is a promising conducting polymer with still increasing application potential in biomedicine. Its surface modification can be an efficient way how to introduce desired functional groups and to control its properties while keeping the bulk characteristics of the material unchanged. The purpose of the study was to synthetize thin films of pristine conducting polyaniline hydrochloride, non-conducting polyaniline base and polyaniline modified with poly(2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPSA) and investigate chosen parameters of their hemocompatibility. The modification was performed either by introduction of PAMPSA during the synthesis or by reprotonation of polyaniline base. The polyaniline hydrochloride and polyaniline base had no impact on blood coagulation and platelet adhesion. By contrast, the polyaniline reprotonated with PAMPSA completely hindered coagulation thanks to its interaction with coagulation factors Xa, Va and IIa. The significantly lower platelets adhesion was also found on this surface. Moreover, this film maintains its conductivity at pH of 6, which is an improvement in comparison with standard polyaniline hydrochloride losing most of its conductivity at pH of 4. Polyaniline film with PAMPSA introduced during synthesis had an impact on platelet adhesion but not on coagulation. The combined conductivity, anticoagulation activity, low platelet adhesion and improved conductivity at pH closer to physiological, open up new possibilities for application of polyaniline reprotonated by PAMPSA in blood-contacting devices, such as catheters or blood vessel grafts. Copyright © 2015 Elsevier B.V. All rights reserved.

  3. Statistical Analysis of Long- and Short-Range Forces Involved in Bacterial Adhesion to Substratum Surfaces as Measured Using Atomic Force Microscopy

    NARCIS (Netherlands)

    Chen, Yun; Busscher, Henk J.; van der Mei, Henny C.; Norde, Willem

    Surface thermodynamic analyses of microbial adhesion using measured contact angles on solid substrata and microbial cell surfaces are widely employed to determine the nature of the adhesion forces, i.e., the interplay between Lifshitz-van der Waals and acid-base forces. While surface thermodynamic

  4. Multipoint contact modeling of nanoparticle manipulation on rough surface

    Energy Technology Data Exchange (ETDEWEB)

    Zakeri, M., E-mail: m.zakeri@tabrizu.ac.ir; Faraji, J.; Kharazmi, M. [University of Tabriz, School of Engineering Emerging Technologies (Iran, Islamic Republic of)

    2016-12-15

    In this paper, the atomic force microscopy (AFM)-based 2-D pushing of nano/microparticles investigated on rough substrate by assuming a multipoint contact model. First, a new contact model was extracted and presented based on the geometrical profiles of Rumpf, Rabinovich and George models and the contact mechanics theories of JKR and Schwartz, to model the adhesion forces and the deformations in the multipoint contact of rough surfaces. The geometry of a rough surface was defined by two main parameters of asperity height (size of roughness) and asperity wavelength (compactness of asperities distribution). Then, the dynamic behaviors of nano/microparticles with radiuses in range of 50–500 nm studied during their pushing on rough substrate with a hexagonal or square arrangement of asperities. Dynamic behavior of particles were simulated and compared by assuming multipoint and single-point contact schemes. The simulation results show that the assumption of multipoint contact has a considerable influence on determining the critical manipulation force. Additionally, the assumption of smooth surfaces or single-point contact leads to large error in the obtained results. According to the results of previous research, it anticipated that a particles with the radius less than about 550 nm start to slide on smooth substrate; but by using multipoint contact model, the predicted behavior changed, and particles with radii of smaller than 400 nm begin to slide on rough substrate for different height of asperities, at first.

  5. Quantification of Staphylococcus aureus adhesion forces on various dental restorative materials using atomic force microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Merghni, Abderrahmen, E-mail: abderrahmen_merghni@yahoo.fr [Laboratoire des Maladies Transmissibles et Substances biologiquement actives (LR99ES27) Faculté de Pharmacie de Monastir, Université de Monastir (Tunisia); Kammoun, Dorra [Laboratoire de Biomatériaux et Biotechnologie, Faculté de Médecine Dentaire, Monastir (Tunisia); Hentati, Hajer [Laboratoire de Recherche en Santé Orale et Réhabilitation Bucco-Faciale (LR12ES11), Faculté de Médecine Dentaire de Monastir, Université de Monastir (Tunisia); Janel, Sébastien [BioImaging Center Lille-FR3642, Lille (France); Popoff, Michka [Cellular Microbiology and Physics of Infection-CNRS UMR8204, INSERM U1019, Institut Pasteur de Lille, Lille University (France); Lafont, Frank [BioImaging Center Lille-FR3642, Lille (France); Cellular Microbiology and Physics of Infection-CNRS UMR8204, INSERM U1019, Institut Pasteur de Lille, Lille University (France); Aouni, Mahjoub [Laboratoire des Maladies Transmissibles et Substances biologiquement actives (LR99ES27) Faculté de Pharmacie de Monastir, Université de Monastir (Tunisia); Mastouri, Maha [Laboratoire des Maladies Transmissibles et Substances biologiquement actives (LR99ES27) Faculté de Pharmacie de Monastir, Université de Monastir (Tunisia); Laboratoire de Microbiologie, CHU Fattouma Bourguiba de Monastir (Tunisia)

    2016-08-30

    Highlights: • 4 dental restorative materials were characterized for roughness, angle contact water and surface free energy. • AFM adhesion forces of S. aureus to tested materials were achieved in presence and absence of salivary conditioning film. • S. aureus initial adhesion is dependent on the surface free energy and roughness. - Abstract: In the oral cavity dental restorative biomaterials can act as a reservoir for infection with opportunistic Staphylococcus aureus pathogen, which can lead to the occurrence of secondary caries and treatment failures. Our aim was to evaluate the adhesion forces by S. aureus on four dental restorative biomaterials and to correlate this finding to differences in specific surface characteristics. Additionally, the influence of salivary conditioning films in exerted adhesion forces was investigated. The substrate hydrophobicity was measured by goniometer and the surface free energy was calculated using the equilibrium advancing contact angle values of water, formamide, and diiodomethane on the tested surfaces. The surface roughness was determined using atomic force microscope (AFM). Additionally, cell force spectroscopy was achieved to quantify the forces that drive cell-substrate interactions. S. aureus bacterium exerted a considerable adhesion forces on various dental restorative materials, which decreased in the presence of saliva conditioning film. The influence of the surface roughness and free energy in initial adhesion appears to be more important than the effect of hydrophobicity, either in presence or absence of saliva coating. Hence, control of surface properties of dental restorative biomaterials is of crucial importance in preventing the attachment and subsequent the biofilm formation.

  6. Transmigrated neutrophils down-regulate the expression of VCAM-1 on endothelial cells and inhibit the adhesion of flowing lymphocytes.

    Science.gov (United States)

    Stone, Philip C W; Lally, Frank; Rahman, Mahbub; Smith, Emily; Buckley, Christopher D; Nash, Gerard B; Rainger, G Ed

    2005-01-01

    As the first leukocytes recruited during inflammation, neutrophils are ideally situated to regulate the subsequent recruitment of mononuclear leukocytes. Here, we found that human neutrophils recruited by endothelial cells (EC), which had been stimulated with tumor necrosis factor alpha for 4 h, inhibited the adhesion of flowing, mixed mononuclear cells or purified lymphocytes over the subsequent 20 h but did not affect the adhesion of a secondary bolus of neutrophils. The degree of inhibition of lymphocyte adhesion increased with the duration of neutrophil-EC contact and with the number of recruited neutrophils. Antibody-blocking studies showed that lymphocyte adhesion was mediated predominantly by vascular cell adhesion molecule-1 (VCAM-1). Recruited neutrophils reduced the EC expression of VCAM-1 but not intercellular adhesion molecule-1 (ICAM-1) or E-selectin in a manner that mirrored the time- and number-dependent reduction in lymphocyte adhesion. VCAM-1 was not shed into the culture supernatant, and a panel of protease inhibitors was unable to reverse its down-regulation, indicating that it was not proteolytically degraded by neutrophils. In EC that had been in contact with neutrophils, the mRNA message for VCAM-1 but not ICAM-1 was down-regulated, indicating that alterations in transcriptional activity were responsible for the reduction in VCAM-1. Thus, under some inflammatory milieu, neutrophils may delay the recruitment of mononuclear leukocytes by regulating the expression of EC adhesion receptors.

  7. Adhesion of Blended Polymer Films.

    Science.gov (United States)

    Staszel, Christopher; Sinha-Ray, Suman; Yarin, Alexander L.; Pourdeyhimi, Behnam

    The adhesive energy of blended and monolithic PCL and PCL-N6 surfaces was measured by blister method and linked to the surface composition of the blended samples. It was shown that PCL does not adhere to N6 after heat-treatment at 55 C, while the monolithic PCL films adhered to the blended samples solely via the PCL islands at the surface. The surface concentration of PCL in the blended samples was established using the novel staining method. It was shown that the surface concentration of PCL differs from its bulk content in the blended samples. The measurements also revealed that the surface concentration of PCL is practically linearly proportionality to the normalized adhesion energy between the blended PCL-N6 samples and monolithic PCL films. Several statistical characteristics of the surfaces of the blended samples were used to characterize their uniformity/non-uniformity. It was shown that increasing the surface uniformity of the adhering component in the blended samples (PCL), one increases the adhesion energy. Moreover, at about 70% of PCL at the surface, the adhesion energy of blended samples to monolithic PCL films could reach the value characterization of the adhesion between two monolithic PCL samples. This work is supported by the Nonwovens Institute, Grant No. 14-163.

  8. Polyurethane adhesives in flat roofs

    Directory of Open Access Journals (Sweden)

    Bogárová Markéta

    2017-01-01

    Full Text Available It is necessary to stabilize individual layers of flat roofs, mainly because of wind suction. Apart from anchoring and surcharge, these layers can be secured by bonding. At present gluing is an indispensable and widely used stabilization method. On our market we can found many types of adhesives, most widely used are based on polyurethane. This paper focuses on problematic about stabilization thermal insulation from expanded polystyrene to vapor barrier from bitumen. One of the main issues is to calculate the exact amount of adhesive, which is required to guarantee the resistance against wind suction. In this problematic we can not find help neither in technical data sheets provided by the manufactures. Some of these data sheets contain at least information about amount of adhesive depending on location in roof plane and building height, but they do not specify the strength of such connection. It was therefore resorted to select several representatives polyurethane adhesives and their subsequent testing on specimens simulating the flat roof segment. The paper described the test methodology and results for two types of polyurethane adhesives.

  9. Adhesive polymer films for the prevention of postsurgical adhesions

    OpenAIRE

    Esser, Eva

    2017-01-01

    Current clinically used lipophilic anti-adhesive films, like SurgiWrap®, have to be fixed to the affected tissue using sutures due to their limited adhesiveness and only degrade very slowly within months and years due to the hydrophobicity and the high molecular weight of the used PLA, which effectively inhibits the uptake of water. The aim of this work was to prepare films that have a much faster degradation pathway due to a hydrogel nature and ideally adhere to the tissue by themselves. The...

  10. Contact activation of blood-plasma coagulation

    Science.gov (United States)

    Golas, Avantika

    Surface engineering of biomaterials with improved hemocompatibility is an imperative, given the widespread global need for cardiovascular devices. Research summarized in this dissertation focuses on contact activation of FXII in buffer and blood plasma frequently referred to as autoactivation. The extant theory of contact activation imparts FXII autoactivation ability to negatively charged, hydrophilic surfaces. According to this theory, contact activation of plasma involves assembly of proteins comprising an "activation complex" on activating surfaces mediated by specific chemical interactions between complex proteins and the surface. This work has made key discoveries that significantly improve our core understanding of contact activation and unravel the existing paradigm of plasma coagulation. It is shown herein that contact activation of blood factor XII (FXII, Hageman factor) in neat-buffer solution exhibits a parabolic profile when scaled as a function of silanized-glass-particle activator surface energy (measured as advancing water adhesion tension t°a=g° Iv costheta in dyne/cm, where g°Iv is water interfacial tension in dyne/cm and theta is the advancing contact angle). Nearly equal activation is observed at the extremes of activator water-wetting properties --36 cocktail, and plasma solutions is shown herein. Activation of blood plasma coagulation in vitro by contact with material surfaces is demonstrably dependent on plasma-volume-to-activator-surface-area ratio. However, activation of factor XII dissolved in buffer, protein cocktail, heat-denatured serum, and FXI deficient plasma does not exhibit activator surface-area dependence. Instead, a highly-variable burst of procoagulant-enzyme yield is measured that exhibits no measurable kinetics, sensitivity to mixing, or solution-temperature dependence. Thus, FXII activation in both buffer and protein-containing solutions does not exhibit characteristics of a biochemical reaction but rather appears to be a

  11. Label-free investigation of the effects of lithium niobate polarization on cell adhesion

    Science.gov (United States)

    Mandracchia, B.; Gennari, O.; Paturzo, M.; Grilli, S.; Ferraro, P.

    2017-06-01

    The determination of contact area is pivotal to understand how biomaterials properties influence cell adhesion. In particular, the influence of surface charges is well-known but still controversial, especially when new functional materials and methods are introduced. Here, we use for the first time Holographic Total Internal Reflection Microscopy (HoloTIRM) to study the influence of the spontaneous polarization of ferroelectric lithium niobate (LN) on the adhesion properties of fibroblast cells. The selective illumination of a very thin region directly above the substrate, achieved by Total Internal Reflection, provides high-contrast images of the contact regions. Holographic recording, on the other hand, allows for label-free quantitative phase imaging of the contact areas between cells and LN. Phase signal is more sensitive in the first 100nm and, thus more reliable in order to locate focal contacts. This work shows that cells adhering on negatively polarized LN present a significant increase of the contact area in comparison with cells adhering on the positively polarized LN substrate, as well as an intensification of contact vicinity. This confirms the potential of LN as a platform for investigating the role of charges on cellular processes. The similarity of cell adhesion behavior on negatively polarized LN and glass control also confirms the possibility to use LN as an active substrate without impairing cell behavior.

  12. Bacterial adhesion on ion-implanted stainless steel surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Q. [Department of Mechanical Engineering, University of Dundee, Dundee DD1 4HN (United Kingdom)]. E-mail: q.zhao@dundee.ac.uk; Liu, Y. [Department of Mechanical Engineering, University of Dundee, Dundee DD1 4HN (United Kingdom); Wang, C. [Department of Mechanical Engineering, University of Dundee, Dundee DD1 4HN (United Kingdom); Wang, S. [Department of Mechanical Engineering, University of Dundee, Dundee DD1 4HN (United Kingdom); Peng, N. [Surrey Ion Beam Centre, University of Surrey, Surrey GU2 7XH (United Kingdom); Jeynes, C. [Surrey Ion Beam Centre, University of Surrey, Surrey GU2 7XH (United Kingdom)

    2007-08-31

    Stainless steel disks were implanted with N{sup +}, O{sup +} and SiF{sub 3} {sup +}, respectively at the Surrey Ion Beam Centre. The surface properties of the implanted surfaces were analyzed, including surface chemical composition, surface topography, surface roughness and surface free energy. Bacterial adhesion of Pseudomonas aeruginosa, Staphylococcus epidermidis and Staphylococcus aureus, which frequently cause medical device-associated infections was evaluated under static condition and laminar flow condition. The effect of contact time, growth media and surface properties of the ion-implanted steels on bacterial adhesion was investigated. The experimental results showed that SiF{sub 3} {sup +}-implanted stainless steel performed much better than N{sup +}-implanted steel, O{sup +}-implanted steel and untreated stainless steel control on reducing bacterial attachment under identical experimental conditions.

  13. Adhesion of CO2 on hydrated mineral surfaces and its implications to geologic carbon sequestration

    Science.gov (United States)

    Wang, S.; Clarens, A. F.; Tao, Z.; Persily, S. M.

    2013-12-01

    Most mineral surfaces are water wetting, which has important implications for the transport of non-aqueous phase liquids, such as CO2, through porous media. In this work, contact angle experiments were carried out wherein unusual wetting behavior was observed between mineral surfaces and liquid or supercritical CO2 under certain geochemical conditions. This behavior can be understood in the context of adhesion between the CO2 and the mineral surface. When adhesion occurs, the wettability characteristics of the surfaces are significantly altered. More importantly, the CO2 exhibits a strong affinity for the surface and is highly resistant to shear forces in the aqueous phase. A static pendant drop method was used on a variety of polished mineral surfaces to measure contact angles. The composition of the aqueous phase (e.g., pH, ionic strength) and the characteristics of the mineral surface (e.g., composition, roughness), were evaluated to understand their impact on the prevalence of adhesion. Pressure and temperature conditions were selected to represent those that would be prevalent in geologic carbon sequestration (GCS) or during leakage from target repositories. Adhesion was widely observed on phlogopite mica, silica, and calcite surfaces with roughness on the order of ~10 nanometers. CO2 exhibited no adhesion on mineral surfaces with higher roughness (e.g., quartz). On smoother surfaces, the CO2 is thought to have more effective contact area with the mineral, enabling the weak van der Waals forces that drive most adhesion processes. Brine chemistry also had an important role in controlling CO2 adhesion. Increases in CO2 partial pressure and ionic strength both increased the incidence of adhesion. The addition of strong acid or strong base permanently inhibited the development of adhesion. These results suggest that the development of adhesion between the CO2 and the mineral surface is dependent on the integrity and thickness of the hydration layer between the CO2

  14. Lignin-Furfural Based Adhesives

    Directory of Open Access Journals (Sweden)

    Prajakta Dongre

    2015-07-01

    Full Text Available Lignin recovered from the hot-water extract of sugar maple (Acer saccharum is used in this study to synthesize adhesive blends to replace phenol-formaldehyde (PF resin. Untreated lignin is characterized by lignin content and nuclear magnetic resonance (NMR analysis. The molecular weight distribution of the lignin and the blends are characterized by size exclusion chromatography (SEC. The effect of pH (0.3, 0.65 and 1, ex situ furfural, and curing conditions on the tensile properties of adhesive reinforced glass fibers is determined and compared to the reinforcement level of commercially available PF resin. The adhesive blend prepared at pH = 0.65 with no added furfural exhibits the highest tensile properties and meets 90% of the PF tensile strength.

  15. Investigation of Adhesive Resistance of Aluminum Alloy by Sandblasting and Electrochemical Machining

    Directory of Open Access Journals (Sweden)

    Jianbing Meng

    2017-03-01

    Full Text Available A novel method for fabricating an adhesive resistance surface is presented. Sandblasting and electrochemical machining were introduced to prepare micro-nano structures on the sample surface. Then, the prepared sample was immersed in a tridecafluoroctyltriethoxysilane ethanol solvent. The surface of the aluminum alloy sample roughened and covered with low-surface-energy chemical groups was examined by scanning electron microscope (SEM and atomic force microscope (AFM. Surface wettability and adhesive resistance of the treated sample were characterized by water contact angles, area fraction, sliding angle and solid surface energy. Furthermore, the effects of some process parameters, such as sand size, current density, electrochemical machining time, and electrolyte concentration, on the contact angle, area fraction, sliding angle and the solid surface-energy of the modified sample surfaces were provided. The results show that the combination of binary micro-structures and surface modification of tridecafluoroctyltriethoxysilane plays a role to improve adhesive resistance of the aluminum alloy surface.

  16. Laryngeal contact granuloma.

    Science.gov (United States)

    Wani, M K; Woodson, G E

    1999-10-01

    To report outcomes of treatment for laryngeal contact granuloma. Prospective treatment of 21 patients with laryngeal contact granulomas using proton-pump inhibitor (PPI) medication. Patients were diagnosed and followed by office endoscopy and patient interview. Three patients did not tolerate PPI medication and were managed by treatment with type 2 histamine (H2) blockers. The lesion completely resolved in 14 of the 18 patients maintained on PPI medication, and significantly regressed in the other 4. Residual granulomas were surgically excised in one patient. Lesions resolved in two patients following injection of botulinum toxin into one thyroarytenoid muscle. One patient had a residual lesion, but symptoms were controlled by medication, and he declined treatment with botulinum toxin. Of the three patients treated with H2-blocker medication, the lesion resolved in only one. PPI medication is effective in the treatment of laryngeal contact granuloma, even in the absence of identifiable symptoms of gastroesophageal reflux.

  17. Rough Surface Contact

    Directory of Open Access Journals (Sweden)

    T Nguyen

    2017-06-01

    Full Text Available This paper studies the contact of general rough curved surfaces having nearly identical geometries, assuming the contact at each differential area obeys the model proposed by Greenwood and Williamson. In order to account for the most general gross geometry, principles of differential geometry of surface are applied. This method while requires more rigorous mathematical manipulations, the fact that it preserves the original surface geometries thus makes the modeling procedure much more intuitive. For subsequent use, differential geometry of axis-symmetric surface is considered instead of general surface (although this “general case” can be done as well in Chapter 3.1. The final formulas for contact area, load, and frictional torque are derived in Chapter 3.2.

  18. ALLERGIC CONTACT DERMATITIS

    Directory of Open Access Journals (Sweden)

    Trisna Yuliharti Tersinanda

    2013-07-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE Allergic contact dermatitis is an immunologic reaction that tends to involve the surrounding skin and may even spread beyond affected sites. This skin disease is one of the more frequent, and costly dermatologic problems. Recent data from United Kingdom and United States suggest that the percentage of occupational contact dermatitis due to allergy may be much higher, thus raising the economic impact of occupational allergic contact dermatitis. There is not enough data about the epidemiology of allergic contact dermatitis in Indonesia, however based on research that include beautician in Denpasar, about 27,6 percent had side effect of cosmetics, which is 25,4 percent of it manifested as allergic contact dermatitis. Diagnosis of allergic contact dermatitis is based on anamnesis, physical examination, patch test, and this disease should be distinguished from other eczematous skin disease. The management is prevention of allergen exposure, symptomatic treatment, and physicochemical barrier /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  19. Psoriasis and Contact Sensitivitiy

    Directory of Open Access Journals (Sweden)

    Deniz Arlı

    2013-03-01

    Full Text Available Objective: The aim of this study was to investigate the frequency of contact sensitivity in patients with psoriasis, whether there was an association between clinical types and contact sensitivity, whether patch test is a factor that causes Koebner reaction and frequency of contact sensitivity against commonly used topical corticosteroids. Methods: Fifty patients with psoriasis and 50 healthy volunteers were included in this study and ‘European standard series' and test units of active ingredients of some corticosteroids were performed on their upper back. The patches were read on hours 24, 48 and on day 7 in order to detect delayed allergic reactions and also Koebner reaction. The results of both groups were compared by using chi-square test. Results: At the end of the patch test allergic reaction was observed in 7 of 50 (14% patients with psoriasis and 12 of 50 (24% healthy volunteers. There was no statistically significant difference between allergic reaction of study group and healthy volunteers. There was no statistically significant difference between the clinical types of psoriasis and allergic contact sensitivity. The frequency of reaction increased in individuals having a positive sensitivity history to any substance in both patient and control groups. Reaction to topical steroids was not seen in any patients. Koebner phenomenon due to patch test was also not seen in any patients. Conclusion: We did not show any association between psoriasis and contact sensitivity in this study. We believe that contact allergens should be determined by using patch test in psoriatic patients with a positive history to any substance.

  20. The effect of contaminants on the adhesion of the spatulae of a gecko

    Indian Academy of Sciences (India)

    MADHU

    The aim of this study was to investigate the effect on the adhesive properties of the spatulae when a particle becomes trapped at the contact surface. Using the Johnson, Kendall and Roberts (JKR) theory, a model was constructed to assist in the analysis of the interactions between the spatula tip, the particle and the surface.

  1. From hydration repulsion to dry adhesion between asymmetric hydrophilic and hydrophobic surfaces.

    Science.gov (United States)

    Kanduč, Matej; Netz, Roland R

    2015-10-06

    Using all-atom molecular dynamics (MD) simulations at constant water chemical potential in combination with basic theoretical arguments, we study hydration-induced interactions between two overall charge-neutral yet polar planar surfaces with different wetting properties. Whether the water film between the two surfaces becomes unstable below a threshold separation and cavitation gives rise to long-range attraction, depends on the sum of the two individual surface contact angles. Consequently, cavitation-induced attraction also occurs for a mildly hydrophilic surface interacting with a very hydrophobic surface. If both surfaces are very hydrophilic, hydration repulsion dominates at small separations and direct attractive force contribution can-if strong enough-give rise to wet adhesion in this case. In between the regimes of cavitation-induced attraction and hydration repulsion we find a narrow range of contact angle combinations where the surfaces adhere at contact in the absence of cavitation. This dry adhesion regime is driven by direct surface-surface interactions. We derive simple laws for the cavitation transition as well as for the transition between hydration repulsion and dry adhesion, which favorably compare with simulation results in a generic adhesion state diagram as a function of the two surface contact angles.

  2. Ultrahydrophobicity indicates a non-adhesive default state in gecko setae.

    Science.gov (United States)

    Autumn, Kellar; Hansen, Wendy

    2006-11-01

    Geckos may represent the world's most demanding adhesives application. The adhesive setae on the toes of climbing geckos must adhere strongly yet avoid fouling or attachment at inappropriate times. We tested the hypothesis that gecko setae are non-adhesive in their unloaded default state by comparing the water droplet contact angle (theta) of isolated setal arrays to the smooth surface of eye spectacle scales of tokay geckos (Gekko gecko). At equilibrium, theta was 98.3 +/- 3.4 degrees in spectacle scales of live geckos and 93.3 +/- 3.5 degrees in isolated spectacles. Isolated setal arrays were ultrahydrophobic, with theta of 160.6 +/- 1.3 degrees (means +/- SD). The difference in theta of setal arrays and smooth spectacles indicates a very low contact fraction. Using Cassie's law of surface wettability, we infer that less than 6.6% of the surface of unloaded setae is solid and at least 93.4% is air space. We calculated that the contact fraction must increase from 6.6% in the unloaded state to 46% in the loaded state to account for previously measured values of adhesion. Thus gecko setae may be non-sticky by default because only a very small contact fraction is possible without mechanically deforming the setal array.

  3. Adhesion of coagulase-negative staphylococci grouped according to physico-chemical surface properties

    NARCIS (Netherlands)

    van der Mei, HC; van de Belt-Gritter, B; Reid, G; Bialkowska-Hobrzanska, H; Busscher, HJ

    1997-01-01

    Physico-chemical cell surface properties of 23 coagulase-negative staphylococcal strains, including contact angles, zeta potentials and elemental cell surface composition were measured, together with the adhesion of all strains to hexadecane, The data were employed in a hierarchical cluster

  4. Gecko-inspired surfaces: a path to strong and reversible dry adhesives.

    Science.gov (United States)

    Boesel, Luciano F; Greiner, Christian; Arzt, Eduard; del Campo, Aránzazu

    2010-05-18

    The amazing adhesion of gecko pads to almost any kind of surfaces has inspired a very active research direction over the last decade: the investigation of how geckos achieve this feat and how this knowledge can be turned into new strategies to reversibly join surfaces. This article reviews the fabrication approaches used so far for the creation of micro- and nanostructured fibrillar surfaces with adhesive properties. In the light of the pertinent contact mechanics, the adhesive properties are presented and discussed. The decisive design parameters are fiber radius and aspect ratio, tilt angle, hierarchical arrangement and the effect of the backing layer. Also first responsive systems that allow thermal switching between nonadhesive and adhesive states are described. These structures show a high potential of application, providing the remaining issues of robustness, reliability, and large-area manufacture can be solved.

  5. Prediction of the adhesive behavior of bio-inspired functionally graded materials against rough surfaces

    Science.gov (United States)

    Peijian, Chen; Juan, Peng; Yucheng, Zhao; Feng, Gao

    2014-06-01

    Roughness effect and adhesion properties are important characteristics to be accessed in the development of functionally graded materials for biological and biomimetic applications, particularly for the hierarchical composition in biomimetic gecko robot. A multi-asperities adhesion model to predict the adhesive forces is presented in this work. The effect of surface roughness and graded material properties, which significantly alter the adhesive strength between contact bodies, can be simultaneously considered in the generalized model. It is found that proper interfacial strength can be controlled by adjusting surface roughness σ / R, graded exponent k and material parameter E*R / Δγ. The results should be helpful in the design of new biomimetic materials and useful in application of micro functional instruments.

  6. Prediction of the adhesive behavior of bio-inspired functionally graded materials against rough surfaces

    Directory of Open Access Journals (Sweden)

    Chen Peijian

    2014-06-01

    Full Text Available Roughness effect and adhesion properties are important characteristics to be accessed in the development of functionally graded materials for biological and biomimetic applications, particularly for the hierarchical composition in biomimetic gecko robot. A multi-asperities adhesion model to predict the adhesive forces is presented in this work. The effect of surface roughness and graded material properties, which significantly alter the adhesive strength between contact bodies, can be simultaneously considered in the generalized model. It is found that proper interfacial strength can be controlled by adjusting surface roughness σ / R, graded exponent k and material parameter E*R / Δγ. The results should be helpful in the design of new biomimetic materials and useful in application of micro functional instruments.

  7. Spa contact dermatitis.

    Science.gov (United States)

    Yankura, Jessica A; Marks, James G; Anderson, Bryan E; Adams, David R

    2008-01-01

    Potassium monopersulfate (MPS) is widely used in spa and pool "shock" treatments, yet contact dermatitis associated with MPS has been rarely reported. A patient presented with a generalized scattered dermatitis from the neck down that worsened after spa use. Patch testing elicited a ++ reaction to ammonium persulfate. Contact with ammonium persulfate was ruled out; however, MPS, which can cross-react with ammonium persulfate, was found to be the active ingredient in the patient's spa shock treatments. The dermatitis cleared after the patient switched to a hydrogen peroxide-based shock treatment.

  8. Investigation of the influence of process parameters on adhesive wear under hot stamping conditions

    Science.gov (United States)

    Schwingenschlögl, P.; Weldi, M.; Merklein, M.

    2017-09-01

    Current challenges like increasing safety standards and reducing fuel consumption motivate lightweight construction in modern car bodies. Besides using lightweight workpiece materials like aluminum, hot stamping has been established as a key technology for producing safety relevant components. Producing hot stamped parts out of ultra-high strength steels offers the possibility to improve the crash performance. At the same time the weight of car structure is reduced by using thinner sheet thicknesses. In order to avoid oxide scale formation and ensure corrosion protection, AlSi coatings are commonly deposited on the sheet surfaces used for direct hot stamping. This workpiece coating has a critical impact on the tribological conditions within the forming process and, as a consequence, influences the quality of hot stamped parts as well as tool wear. AlSi coatings have been identified as major reason for adhesive wear, which represents the main wear mechanism in hot stamping. Within this study, the influence of the process parameters on adhesive wear are investigated in dependency of workpiece and tool temperatures, drawing velocities and contact pressures. The tribological behavior is analyzed based on strip drawing experiments under direct hot stamping conditions. The experiments are performed with AlSi coated 22MnB5 in contact with the hot working tool steel 1.2367. For analyzing the amount of adhesion on the friction jaws, the surfaces are characterized by optical measurements. The experiments indicate that higher workpiece temperatures cause severe adhesive wear on the tool surface, while an increase of drawing velocity or contact pressure led to reduced adhesion. The measured friction coefficients decreased with rising amount of adhesion and remained at a constant level after a certain adhesive layer was built up on the tool surface.

  9. A wet-tolerant adhesive patch inspired by protuberances in suction cups of octopi

    Science.gov (United States)

    Baik, Sangyul; Kim, Da Wan; Park, Youngjin; Lee, Tae-Jin; Ho Bhang, Suk; Pang, Changhyun

    2017-06-01

    Adhesion strategies that rely on mechanical interlocking or molecular attractions between surfaces can suffer when coming into contact with liquids. Thus far, artificial wet and dry adhesives have included hierarchical mushroom-shaped or porous structures that allow suction or capillarity, supramolecular structures comprising nanoparticles, and chemistry-based attractants that use various protein polyelectrolytes. However, it is challenging to develop adhesives that are simple to make and also perform well—and repeatedly—under both wet and dry conditions, while avoiding non-chemical contamination on the adhered surfaces. Here we present an artificial, biologically inspired, reversible wet/dry adhesion system that is based on the dome-like protuberances found in the suction cups of octopi. To mimic the architecture of these protuberances, we use a simple, solution-based, air-trap technique that involves fabricating a patterned structure as a polymeric master, and using it to produce a reversed architecture, without any sophisticated chemical syntheses or surface modifications. The micrometre-scale domes in our artificial adhesive enhance the suction stress. This octopus-inspired system exhibits strong, reversible, highly repeatable adhesion to silicon wafers, glass, and rough skin surfaces under various conditions (dry, moist, under water and under oil). To demonstrate a potential application, we also used our adhesive to transport a large silicon wafer in air and under water without any resulting surface contamination.

  10. Multiscaling Approach for Non-Destructive Adhesion Studies of Metal/Polymer Composites.

    Science.gov (United States)

    Füllbrandt, Marieke; Kesal, Dikran; von Klitzing, Regine

    2015-08-05

    The adhesion of polyamide 6 (PA6) and polyethylene (PE) toward an aluminum alloy (Al-A) and a dual phase steel (DPS) is studied by contact angle (CA) measurements and atomic force microscopy (AFM). With the combination of the two methods the adhesion properties on a macro- and (sub)microscopic scale can be determined in a nondestructive way. The work of adhesion per area (Wad) of the studied metal/polymer hybrids qualitatively scales the same on both length scales, that is, Al-A/PA6 > DPS/PA6 > Al-A/PE, DPS/PE. The polymer dominates the adhesion. The lower adhesion for PE toward the metal surfaces is explained by dominating van der Waals attraction forces, whereas adhesion for PA6 can also be attributed to attractive polar forces such as hydrogen bonding. For metal/PA6, Wad on a macro- and microscopic length scale is similar. For metal/PE, a discrepancy is measured with lower adhesion values on the microscopic scale than on the macroscopic scale.

  11. Nonmuscle myosin heavy chain IIA mediates integrin LFA-1 de-adhesion during T lymphocyte migration.

    Science.gov (United States)

    Morin, Nicole A; Oakes, Patrick W; Hyun, Young-Min; Lee, Dooyoung; Chin, Y Eugene; Chin, Eugene Y; King, Michael R; Springer, Timothy A; Shimaoka, Motomu; Tang, Jay X; Reichner, Jonathan S; Kim, Minsoo

    2008-01-21

    Precise spatial and temporal regulation of cell adhesion and de-adhesion is critical for dynamic lymphocyte migration. Although a great deal of information has been learned about integrin lymphocyte function-associated antigen (LFA)-1 adhesion, the mechanism that regulates efficient LFA-1 de-adhesion from intercellular adhesion molecule (ICAM)-1 during T lymphocyte migration is unknown. Here, we show that nonmuscle myosin heavy chain IIA (MyH9) is recruited to LFA-1 at the uropod of migrating T lymphocytes, and inhibition of the association of MyH9 with LFA-1 results in extreme uropod elongation, defective tail detachment, and decreased lymphocyte migration on ICAM-1, without affecting LFA-1 activation by chemokine CXCL-12. This defect was reversed by a small molecule antagonist that inhibits both LFA-1 affinity and avidity regulation, but not by an antagonist that inhibits only affinity regulation. Total internal reflection fluorescence microscopy of the contact zone between migrating T lymphocytes and ICAM-1 substrate revealed that inactive LFA-1 is selectively localized to the posterior of polarized T lymphocytes, whereas active LFA-1 is localized to their anterior. Thus, during T lymphocyte migration, uropodal adhesion depends on LFA-1 avidity, where MyH9 serves as a key mechanical link between LFA-1 and the cytoskeleton that is critical for LFA-1 de-adhesion.

  12. Cytotoxicity evaluation of three light-cured dentin adhesive materials on human gingival fibroblasts, ex vivo.

    Science.gov (United States)

    Kierklo, A; Pawińska, M; Tokajuk, G; Popławska, B; Bielawska, A

    2012-01-01

    To evaluate the cytotoxic effects of three current light-cured dentin adhesives, in both uncured and post-cured conditions, on human gingival fibroblasts. The materials tested were Heliobond, Adper Single Bond 2 and Xeno V, which are characterized by various compositions and application procedures. Each agent, in volumes of 5 and 10 μL, was tested after polymerization, and those unpolymerized were diluted in DMEM to 10-3 and 10-5. The cytotoxicity of the adhesives was assessed on the basis of a test of cell viability in a culture of human gingival fibroblasts, with the use of tetrazolic salt (MTT assay). The results showed that, among the adhesive/bonding systems tested, Xeno V was the least cytotoxic. There were statistically significant differences in cell survival between polymerized Xeno V, Adper Single Bond 2 and Heliobond in the amount of 5 μL as well as between the Xeno V and Adper Single Bond 2 in 10-5 dilutions. The tested adhesives were more toxic in the polymerized form than in the dilutions. Samples of 10 μL resulted in a lower survival percentage of fibroblasts compared to 5 μL. All the tested adhesives demonstrated cytopathic effects towards human gingival fibroblasts, but varied in their cytotoxicity. This has clinical implications. Dentists should follow the rules of adhesive application, precisely dose them and not allow direct contact with the gums as, even after polymerization, adhesive agents exhibit potential cytotoxic activity.

  13. Experimental Investigation on the Morphology and Adhesion Mechanism of Leech Posterior Suckers.

    Directory of Open Access Journals (Sweden)

    Huashan Feng

    Full Text Available The posterior sucker of a leech represents a fascinating natural system that allows the leech to adhere to different terrains and substrates. However, the mechanism of adhesion and desorption has not yet to be elucidated. In order to better understand how the adhesion is performed, we analyzed the surface structure, adsorption movements, the muscles' distribution, physical characteristics, and the adsorption force of the leech posterior suckers by experimental investigation. Three conclusions can be drawn based on the obtained experimental results. First, the adhesion by the posterior sucker is wet adhesion, because the surface of the posterior sucker is smooth and the sealing can only be achieved on wet surfaces. Second, the deformation texture, consisting of soft collagen tissues and highly ductile epidermal tissues, plays a key role in adhering to rough surfaces. Finally, the adhesion and desorption is achieved by the synergetic operation of six muscle fibers working in different directions. Concrete saying, directional deformation of the collagen/epithermal interface driven by spatially-distributed muscle fibers facilitates the excretion of fluids in the sucker venter, thus allowing liquid sealing. Furthermore, we found that the adhesion strength is directly related to the size of the contact surface which is generated and affected by the sucker deformation. Such an underlying physical mechanism offers potential cues for developing innovative bio-inspired artificial adhesion systems.

  14. Experimental Investigation on the Morphology and Adhesion Mechanism of Leech Posterior Suckers.

    Science.gov (United States)

    Feng, Huashan; Chai, Ningli; Dong, Wenhao

    2015-01-01

    The posterior sucker of a leech represents a fascinating natural system that allows the leech to adhere to different terrains and substrates. However, the mechanism of adhesion and desorption has not yet to be elucidated. In order to better understand how the adhesion is performed, we analyzed the surface structure, adsorption movements, the muscles' distribution, physical characteristics, and the adsorption force of the leech posterior suckers by experimental investigation. Three conclusions can be drawn based on the obtained experimental results. First, the adhesion by the posterior sucker is wet adhesion, because the surface of the posterior sucker is smooth and the sealing can only be achieved on wet surfaces. Second, the deformation texture, consisting of soft collagen tissues and highly ductile epidermal tissues, plays a key role in adhering to rough surfaces. Finally, the adhesion and desorption is achieved by the synergetic operation of six muscle fibers working in different directions. Concrete saying, directional deformation of the collagen/epithermal interface driven by spatially-distributed muscle fibers facilitates the excretion of fluids in the sucker venter, thus allowing liquid sealing. Furthermore, we found that the adhesion strength is directly related to the size of the contact surface which is generated and affected by the sucker deformation. Such an underlying physical mechanism offers potential cues for developing innovative bio-inspired artificial adhesion systems.

  15. Effects of adhesion dynamics and substrate compliance on the shape and motility of crawling cells.

    Directory of Open Access Journals (Sweden)

    Falko Ziebert

    Full Text Available Computational modeling of eukaryotic cells moving on substrates is an extraordinarily complex task: many physical processes, such as actin polymerization, action of motors, formation of adhesive contacts concomitant with both substrate deformation and recruitment of actin etc., as well as regulatory pathways are intertwined. Moreover, highly nontrivial cell responses emerge when the substrate becomes deformable and/or heterogeneous. Here we extended a computational model for motile cell fragments, based on an earlier developed phase field approach, to account for explicit dynamics of adhesion site formation, as well as for substrate compliance via an effective elastic spring. Our model displays steady motion vs. stick-slip transitions with concomitant shape oscillations as a function of the actin protrusion rate, the substrate stiffness, and the rates of adhesion. Implementing a step in the substrate's elastic modulus, as well as periodic patterned surfaces exemplified by alternating stripes of high and low adhesiveness, we were able to reproduce the correct motility modes and shape phenomenology found experimentally. We also predict the following nontrivial behavior: the direction of motion of cells can switch from parallel to perpendicular to the stripes as a function of both the adhesion strength and the width ratio of adhesive to non-adhesive stripes.

  16. The Role of Surface Chemistry in Adhesion and Wetting of Gecko Toe Pads

    Science.gov (United States)

    Badge, Ila; Stark, Alyssa Y.; Paoloni, Eva L.; Niewiarowski, Peter H.; Dhinojwala, Ali

    2014-10-01

    An array of micron-sized setal hairs offers geckos a unique ability to walk on vertical surfaces using van der Waals interactions. Although many studies have focused on the role of surface morphology of the hairs, very little is known about the role of surface chemistry on wetting and adhesion. We expect that both surface chemistry and morphology are important, not only to achieve optimum dry adhesion but also for increased efficiency in self-cleaning of water and adhesion under wet conditions. Here, we used a plasma-based vapor deposition process to coat the hairy patterns on gecko toe pad sheds with polar and non-polar coatings without significantly perturbing the setal morphology. By a comparison of wetting across treatments, we show that the intrinsic surface of gecko setae has a water contact angle between 70-90°. As expected, under wet conditions, adhesion on a hydrophilic surface (glass) was lower than that on a hydrophobic surface (alkyl-silane monolayer on glass). Surprisingly under wet and dry conditions the adhesion was comparable on the hydrophobic surface, independent of the surface chemistry of the setal hairs. This work highlights the need to utilize morphology and surface chemistry in developing successful synthetic adhesives with desirable adhesion and self-cleaning properties.

  17. Nonadhesive, silica nanoparticles-based brush-coated contact lens casesCompromising between ease of cleaning and microbial transmission to contact lenses

    NARCIS (Netherlands)

    Qu, Wenwen; Hooymans, Johanna M. M.; Qiu, Jun; de-Bont, Nik; Gelling, Onko-Jan; van der Mei, Henny C.; Busscher, Henk J.

    Surface properties of lens cases are determinant for their cleanability and for microbial transmission from lens cases to contact lenses (CLs). PEG-polymer-brush-coatings are known to decrease microbial adhesion more than other surface-coatings. Here, we applied a robust, silica nanoparticles-based

  18. Adhesion complex formation after small keratectomy wounds in the cornea.

    Science.gov (United States)

    Stock, E L; Kurpakus, M A; Sambol, B; Jones, J C

    1992-02-01

    The adhesion complex of the corneal epithelium consists of the hemidesmosome and its associated structures, such as anchoring filaments, lamina densa of the basement membrane, and anchoring fibrils. It contributes to the adhesion of the corneal epithelium to Bowman's layer. To understand the adhesion complex better, an electron microscopic and immunofluorescence analysis was done of the reformation of the adhesion complex in small (1 mm) keratectomy wounds in the guinea pig cornea. In these wounds, the epithelium, hemidesmosomes, basal lamina, anchoring fibrils, and anterior stroma were removed. The wound bed was epithelialized completely by 24 hr after wounding. Immunofluorescence analyses involved the use of antibodies against plaque components of the hemidesmosome, an antibody against laminin, and an antibody against the collagen VII component of anchoring fibrils. At 18 hr after wounding, there was no morphologic evidence of hemidesmosomes at the epithelial-stromal interface. At 24 hr, hemidesmosomes were observed, with or without subjacent lamina densa. Furthermore, plaque components were detected by immunofluorescence in those cells in contact with the wound bed. In contrast, no type VII collagen was detected. On day 7, collagen VII, laminin, and bullous pemphigoid autoantibody markers colocalized along the wound bed as determined by immunofluorescence. However, at the ultrastructural level, even though the lamina densa of the basal lamina was observed primarily where hemidesmosomes were present, it remained incomplete. In this study, the precise temporal sequence in which components are incorporated into the assembling adhesion complex was described during wound healing. Furthermore, the possibility that the hemidesmosomal plaque nucleates the formation of the underlying basal lamina was discussed.

  19. Disproportionate Minority Contact.

    Science.gov (United States)

    Fix, Rebecca L; Cyperski, Melissa A; Burkhart, Barry R

    2017-04-01

    The overrepresentation of racial/ethnic minorities within the criminal justice system relative to their population percentage, a phenomenon termed disproportionate minority contact, has been examined within general adult and adolescent offender populations; yet few studies have tested whether this phenomenon extends to juvenile sexual offenders (JSOs). In addition, few studies have examined whether offender race/ethnicity influences registration and notification requirements, which JSOs are subject to in some U.S. states. The present study assessed for disproportionate minority contact among general delinquent offenders and JSOs, meaning it aimed to test whether the criminal justice system treats those accused of sexual and non-sexual offenses differently by racial/ethnic group. Furthermore, racial/ethnic group differences in risk, legal classification, and sexual offending were examined for JSOs. Results indicated disproportionate minority contact was present among juveniles with non-sexual offenses and JSOs in Alabama. In addition, offense category and risk scores differed between African American and European American JSOs. Finally, registration classifications were predicted by offending characteristics, but not race/ethnicity. Implications and future directions regarding disproportionate minority contact among JSOs and social and legal policy affecting JSOs are discussed.

  20. Mathematics Connection: Contact

    African Journals Online (AJOL)

    Principal Contact. Dr. Kofi Mereku Executive Editor Department of Mathematics Education, UCE Mathematical Association of Ghana, C/o Department of Mathematics Education University College of Education of Winneba P. O. Box 25, Winneba, Ghana Phone: +233244961318. Email: dkmereku@uew.edu.gh ...

  1. Zoologist (The): Contact

    African Journals Online (AJOL)

    Principal Contact. Prof. A.B. Odaibo Editor-in-Chief University of Ibadan, Ibadan. Nigeria. Hydrobiology & Fisheries Unit, Department of Zoology, University of Ibadan, Ibadan. Oyo State. Nigeria. West Africa. Alternative Email Address: adebakar19@yahoo.com. Phone: +234-(0)- 803-049-74. Fax: +234-02-8103043

  2. Have Confidence in Contact

    Science.gov (United States)

    Crisp, Richard J.; Turner, Rhiannon N.

    2010-01-01

    In an article in the May-June 2009 "American Psychologist," we discussed a new approach to reducing prejudice and encouraging more positive intergroup relations (Crisp & Turner, 2009). We named the approach imagined intergroup contact and defined it as "the mental simulation of a social interaction with a member or members of an outgroup category"…

  3. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Lens-Related Eye Infections Mar 01, 2017 New Technology Helps the Legally Blind Be More Independent Oct 31, 2016 What You Should Know About Swimming and Your Eyes Aug 16, 2016 5 Steps to Healthy Contact Lens Use May 31, 2016 More Eye Health News Eyeglasses May One Day Treat Glaucoma JAN 18, ...

  4. Ebonyi Medical Journal: Contact

    African Journals Online (AJOL)

    Principal Contact. OUJ Umeora Dr. Ebonyi State Uni. Teaching Hospital. P.O. Box 980 Abakaliki – Ebonyi State Nigeria. Postal code: 480001. Alternative email address: ebsuthemj@yahoo.com. Phone: +234 8039558074. Fax: +234 43 221856, +234. Email: oujair@yahoo.com ...

  5. Nigeria Agricultural Journal: Contact

    African Journals Online (AJOL)

    Principal Contact. Prof. J.A. Mbanasor Editor in Chief Head of Department, Agribusiness and Management College of Agribusiness and Financial Management Michael Okpara University of Agriculture Office of the Head of Department. Agribusiness and Management. College of Agribusiness and Financial Management.

  6. Ghana Mining Journal: Contact

    African Journals Online (AJOL)

    Principal Contact. Professor Daniel Mireku-Gyimah Editor-in-Chief University of Mines & Technology Ghana Mining Journal University of Mines & Technology P. O. BOX 237 Tarkwa Ghana Phone: +233 362 20280/20324. Fax: +233 362 20306. Email: dm.gyimah@umat.edu.gh ...

  7. Contact allergy to spices

    NARCIS (Netherlands)

    W. Van den Akker Th. (W.); I.D. Roesyanto-Mahadi (I.); A.W. van Toorenenbergen (Albert); Th. van Joost (Theo)

    1990-01-01

    textabstractA group of 103 patients suspected of contact allergy was tested with the European standard series, wood tars and spices; paprika, cinnamon, laurel, celery seed, nutmeg, curry, black pepper, cloves, while pepper, coriander, cacao and garlic. 32 patients (Group I) were selected on the

  8. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Tips & Prevention News Ask an Ophthalmologist Patient Stories Español Eye Health / News Halloween Hazard: The Hidden Dangers ... Decorative Contact Lenses Without a Prescription Leer en Español: Peligros asociados con los lentes de contacto de ...

  9. Genital contact allergy.

    Science.gov (United States)

    Ljubojević, Suzana; Lipozencić, Jasna; Celić, Diana; Turcić, Petra

    2009-01-01

    Irritant and allergic contact dermatitis is commonly seen in patients complaining of itching, burning and irritation in the genital area. The aim of this retrospective study was to establish the prevalence of allergic contact dermatitis patients with genital complaints. We followed 33 patients with persistent or recurrent genital redness, itching and burning sensation. Diagnosis was made by history, clinical examination and patch testing. Patch tests were carried out according to the International Contact Dermatitis Research Group with a standard series of allergens. We also tested topical pharmaceutical products that individual patients used for treating genital symptoms and patients self intimate hygiene products. There were 11 male and 22 female patients, mean age 38 years. Thirteen (39%) patients had one or more positive allergic reactions, mainly to nickel-sulfate, thimerosal, balsam of Peru, formaldehyde and neomycin sulfate. In seven of 13 patients with positive patch test results, these reactions were considered to be relevant to their clinical condition. Three patients had positive patch test reactions to their intimate hygiene products. One patient had positive patch test reaction to latex condom. Patients with genital symptoms are at a risk of developing contact sensitivity. Patch testing is useful in the management of these patients and many can be helped by allergen avoidance.

  10. Open Veterinary Journal: Contact

    African Journals Online (AJOL)

    Principal Contact. Dr. Ibrahim Eldaghayes Faculty of Veterinary Medicine, University of Tripoli Faculty of Veterinary Medicine, University of Tripoli, P. O. Box 13662, Tripoli, Libya Phone: +218 21 462 8422. Fax: +218 21 462 8421. Email: ibrahim.eldaghayes@vetmed.edu.ly ...

  11. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... be purchased over-the-counter or on the Internet," says Thomas Steinemann, MD, professor of ophthalmology at Case Western Reserve University in Cleveland. "This is far from the truth." Real People, Real Problems with Colored Contact Lenses Julian: ...

  12. Lettuce contact allergy

    DEFF Research Database (Denmark)

    Paulsen, Evy; Andersen, Klaus E

    2016-01-01

    Lettuce (Lactuca sativa L.) and its varieties are important vegetable crops worldwide. They are also well-known, rarely reported, causes of contact allergy. As lettuce allergens and extracts are not commercially available, the allergy may be underdiagnosed. The aims of this article are to present...

  13. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... contact lenses , from the U.S. Food and Drug Administration (FDA). Are the colored lenses you are considering ... By Dan Gudgel The U.S. Food and Drug Administration has approved sales of a gene therapy treatment ...

  14. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... in the United States. All contact lenses are medical devices that require a prescription and proper fitting by an eye-care professional. ... care professional such as an ophthalmologist — an eye medical doctor — who will ... a valid prescription that includes the brand name, lens measurements, and ...

  15. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Professionals Link your website to EyeSmart Embed EyeSmart videos on your website Promotional materials for eye health observances EyeSmart resources are also available in Spanish . Follow The Academy Professionals: Education Guidelines News Multimedia Public & Patients: Contact Us About ...

  16. Quantum contact interactions

    Indian Academy of Sciences (India)

    This is the transfer matrix representation [3], which has been treated as the standard form of generalized point .... the two-body interaction has no effect on identical bosons, but does have an effect on the fermions. ... We now go back to the generalU(2) representation of contact interactions, and look at the structure of the ...

  17. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... colored contact lenses , from the U.S. Food and Drug Administration (FDA). Are the colored lenses you are ... 2017 By Dan Gudgel The U.S. Food and Drug Administration has approved sales of a gene therapy ...

  18. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... eye health observances EyeSmart resources are also available in Spanish . Follow The Academy Professionals: Education Guidelines News Multimedia Public & Patients: Contact Us About the Academy Jobs at the Academy Financial Relationships with Industry Medical Disclaimer Privacy Policy Terms ...

  19. Oromia Law Journal: Contact

    African Journals Online (AJOL)

    com. ISSN: 2304-8239. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use · Contact AJOL · News. OTHER RESOURCES.

  20. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Retailers that sell contacts without a prescription are breaking the law, and may be fined $11,000 per violation. "Many of the lenses found online or in beauty salons, novelty shops or in pop-up Halloween stores are not FDA-approved and are ...